zwPupHKd

12020-10-30 11:12:57 WARNING (MainThread) [homeassistant.loader] You are using a custom integration for visonic which has not been tested by Home Assistant. This component might cause stability problems, be sure to disable it if you experience issues with Home Assistant.
22020-10-30 11:12:57 WARNING (MainThread) [homeassistant.loader] You are using a custom integration for entity_controller which has not been tested by Home Assistant. This component might cause stability problems, be sure to disable it if you experience issues with Home Assistant.
32020-10-30 11:12:57 WARNING (MainThread) [homeassistant.loader] You are using a custom integration for hacs which has not been tested by Home Assistant. This component might cause stability problems, be sure to disable it if you experience issues with Home Assistant.
42020-10-30 11:12:58 INFO (MainThread) [homeassistant.setup] Setup of domain logger took 0.0 seconds
52020-10-30 11:12:59 INFO (MainThread) [homeassistant.setup] Setting up recorder
62020-10-30 11:12:59 INFO (MainThread) [homeassistant.setup] Setting up http
72020-10-30 11:13:00 INFO (MainThread) [homeassistant.setup] Setup of domain http took 0.2 seconds
82020-10-30 11:13:00 INFO (MainThread) [homeassistant.setup] Setting up system_log
92020-10-30 11:13:00 INFO (MainThread) [homeassistant.setup] Setup of domain system_log took 0.0 seconds
102020-10-30 11:13:00 INFO (MainThread) [homeassistant.setup] Setup of domain recorder took 0.8 seconds
112020-10-30 11:13:00 INFO (MainThread) [homeassistant.bootstrap] Setting up stage 1: {'system_log', 'auth', 'cloud', 'hassio', 'frontend', 'person', 'websocket_api', 'image', 'config', 'device_automation', 'lovelace', 'search', 'onboarding', 'alexa', 'http', 'webhook', 'api'}
122020-10-30 11:13:00 INFO (MainThread) [homeassistant.setup] Setting up auth
132020-10-30 11:13:00 INFO (MainThread) [homeassistant.setup] Setup of domain auth took 0.0 seconds
142020-10-30 11:13:00 INFO (MainThread) [homeassistant.setup] Setting up hassio
152020-10-30 11:13:00 INFO (MainThread) [homeassistant.setup] Setting up websocket_api
162020-10-30 11:13:00 INFO (MainThread) [homeassistant.setup] Setup of domain websocket_api took 0.0 seconds
172020-10-30 11:13:00 INFO (MainThread) [homeassistant.setup] Setting up config
182020-10-30 11:13:00 INFO (MainThread) [homeassistant.setup] Setting up device_automation
192020-10-30 11:13:00 INFO (MainThread) [homeassistant.setup] Setup of domain device_automation took 0.0 seconds
202020-10-30 11:13:00 INFO (MainThread) [homeassistant.setup] Setting up lovelace
212020-10-30 11:13:01 INFO (MainThread) [homeassistant.setup] Setting up alexa
222020-10-30 11:13:01 INFO (MainThread) [homeassistant.setup] Setup of domain alexa took 0.0 seconds
232020-10-30 11:13:01 INFO (MainThread) [homeassistant.setup] Setting up webhook
242020-10-30 11:13:01 INFO (MainThread) [homeassistant.setup] Setup of domain webhook took 0.0 seconds
252020-10-30 11:13:02 INFO (MainThread) [homeassistant.setup] Setting up api
262020-10-30 11:13:02 INFO (MainThread) [homeassistant.setup] Setting up image
272020-10-30 11:13:02 INFO (MainThread) [homeassistant.setup] Setup of domain api took 0.4 seconds
282020-10-30 11:13:02 INFO (MainThread) [homeassistant.setup] Setup of domain config took 1.7 seconds
292020-10-30 11:13:02 INFO (MainThread) [homeassistant.setup] Setting up search
302020-10-30 11:13:02 INFO (MainThread) [homeassistant.setup] Setup of domain search took 0.0 seconds
312020-10-30 11:13:02 INFO (MainThread) [homeassistant.setup] Setup of domain lovelace took 1.6 seconds
322020-10-30 11:13:02 INFO (MainThread) [homeassistant.setup] Setup of domain image took 0.1 seconds
332020-10-30 11:13:02 INFO (SyncWorker_9) [homeassistant.loader] Loaded google_assistant from homeassistant.components.google_assistant
342020-10-30 11:13:02 INFO (MainThread) [homeassistant.setup] Setting up person
352020-10-30 11:13:05 INFO (MainThread) [homeassistant.setup] Setting up cloud
362020-10-30 11:13:05 INFO (MainThread) [homeassistant.helpers.storage] Migrating person storage from 1 to 2
372020-10-30 11:13:05 INFO (MainThread) [homeassistant.setup] Setup of domain person took 3.0 seconds
382020-10-30 11:13:05 INFO (MainThread) [homeassistant.setup] Setting up onboarding
392020-10-30 11:13:05 INFO (MainThread) [homeassistant.setup] Setup of domain cloud took 0.2 seconds
402020-10-30 11:13:05 INFO (MainThread) [homeassistant.setup] Setup of domain onboarding took 0.0 seconds
412020-10-30 11:13:05 INFO (SyncWorker_5) [homeassistant.loader] Loaded device_tracker from homeassistant.components.device_tracker
422020-10-30 11:13:05 INFO (SyncWorker_18) [homeassistant.loader] Loaded panel_custom from homeassistant.components.panel_custom
432020-10-30 11:13:05 INFO (MainThread) [homeassistant.setup] Setting up frontend
442020-10-30 11:13:05 INFO (MainThread) [homeassistant.setup] Setup of domain hassio took 5.1 seconds
452020-10-30 11:13:05 INFO (MainThread) [homeassistant.setup] Setup of domain frontend took 0.1 seconds
462020-10-30 11:13:05 INFO (MainThread) [homeassistant.bootstrap] Setting up stage 2: {'ipp', 'ssdp', 'timer', 'visonic', 'scene', 'camera', 'cast', 'entity_controller', 'default_config', 'input_select', 'input_boolean', 'script', 'mobile_app', 'switch', 'dsmr', 'group', 'map', 'sensor', 'logbook', 'python_script', 'system_health', 'zone', 'media_player', 'history', 'tag', 'knx', 'stream', 'sun', 'input_datetime', 'synology_dsm', 'zeroconf', 'persistent_notification', 'counter', 'rest_command', 'updater', 'hacs', 'automation', 'media_source', 'input_number', 'zwave', 'sonos', 'input_text', 'cover', 'binary_sensor'}
472020-10-30 11:13:05 INFO (MainThread) [homeassistant.setup] Setting up timer
482020-10-30 11:13:05 INFO (MainThread) [homeassistant.setup] Setting up scene
492020-10-30 11:13:05 INFO (MainThread) [homeassistant.components.scene] Setting up scene.homeassistant
502020-10-30 11:13:06 INFO (MainThread) [homeassistant.setup] Setting up entity_controller
512020-10-30 11:13:06 INFO (MainThread) [custom_components.entity_controller] If you have ANY issues with EntityController (v9.1.0), please enable DEBUG logging under the logger component and kindly report the issue on Github. https://github.com/danobot/entity-controller/issues
522020-10-30 11:13:06 INFO (MainThread) [custom_components.entity_controller] Domain Configuration: OrderedDict([('motion_light', OrderedDict([('sensor', 'binary_sensor.wc_boven_radar'), ('sensor_type', 'duration'), ('entity', 'light.fibaro_system_fgd211_universal_dimmer_500w_level_2'), ('delay', 300), ('overrides', ['input_boolean.wc_boven_on'])]))])
532020-10-30 11:13:06 INFO (MainThread) [custom_components.entity_controller.motion_light] Service data set up
542020-10-30 11:13:06 INFO (MainThread) [homeassistant.setup] Setting up input_select
552020-10-30 11:13:06 INFO (MainThread) [homeassistant.setup] Setting up input_boolean
562020-10-30 11:13:06 INFO (SyncWorker_21) [homeassistant.loader] Loaded template from homeassistant.components.template
572020-10-30 11:13:06 INFO (MainThread) [homeassistant.setup] Setting up dsmr
582020-10-30 11:13:06 INFO (MainThread) [homeassistant.setup] Setup of domain dsmr took 0.0 seconds
592020-10-30 11:13:06 INFO (MainThread) [homeassistant.setup] Setting up group
602020-10-30 11:13:06 INFO (MainThread) [homeassistant.setup] Setting up map
612020-10-30 11:13:06 INFO (MainThread) [homeassistant.setup] Setup of domain map took 0.0 seconds
622020-10-30 11:13:06 INFO (SyncWorker_20) [homeassistant.loader] Loaded time_date from homeassistant.components.time_date
632020-10-30 11:13:06 INFO (MainThread) [homeassistant.setup] Setting up logbook
642020-10-30 11:13:06 INFO (MainThread) [homeassistant.setup] Setting up python_script
652020-10-30 11:13:06 INFO (MainThread) [homeassistant.setup] Setting up system_health
662020-10-30 11:13:06 INFO (MainThread) [homeassistant.setup] Setup of domain system_health took 0.0 seconds
672020-10-30 11:13:06 INFO (MainThread) [homeassistant.setup] Setting up zone
682020-10-30 11:13:06 WARNING (MainThread) [homeassistant.loader] You are using a custom integration for samsungtv_encrypted which has not been tested by Home Assistant. This component might cause stability problems, be sure to disable it if you experience issues with Home Assistant.
692020-10-30 11:13:06 INFO (SyncWorker_19) [homeassistant.util.package] Attempting install of netdisco==2.6.0
702020-10-30 11:13:06 INFO (MainThread) [homeassistant.setup] Setting up history
712020-10-30 11:13:06 INFO (MainThread) [homeassistant.setup] Setup of domain history took 0.0 seconds
722020-10-30 11:13:06 INFO (MainThread) [homeassistant.setup] Setting up tag
732020-10-30 11:13:06 INFO (MainThread) [homeassistant.setup] Setting up sun
742020-10-30 11:13:06 INFO (MainThread) [homeassistant.setup] Setup of domain sun took 0.0 seconds
752020-10-30 11:13:06 INFO (MainThread) [homeassistant.setup] Setting up input_datetime
762020-10-30 11:13:06 INFO (MainThread) [homeassistant.setup] Setting up counter
772020-10-30 11:13:06 INFO (MainThread) [homeassistant.setup] Setting up rest_command
782020-10-30 11:13:06 INFO (MainThread) [homeassistant.setup] Setup of domain rest_command took 0.0 seconds
792020-10-30 11:13:06 INFO (MainThread) [homeassistant.setup] Setting up media_source
802020-10-30 11:13:06 INFO (MainThread) [homeassistant.setup] Setting up input_number
812020-10-30 11:13:07 INFO (MainThread) [homeassistant.setup] Setting up input_text
822020-10-30 11:13:07 INFO (SyncWorker_16) [homeassistant.loader] Loaded ping from homeassistant.components.ping
832020-10-30 11:13:07 INFO (MainThread) [homeassistant.setup] Setup of domain scene took 1.9 seconds
842020-10-30 11:13:07 INFO (MainThread) [custom_components.entity_controller] The entity_controller component is ready!
852020-10-30 11:13:07 INFO (MainThread) [homeassistant.setup] Setup of domain entity_controller took 1.8 seconds
862020-10-30 11:13:07 INFO (SyncWorker_6) [homeassistant.loader] Loaded mqtt from homeassistant.components.mqtt
872020-10-30 11:13:07 INFO (MainThread) [homeassistant.setup] Setup of domain logbook took 1.5 seconds
882020-10-30 11:13:07 INFO (MainThread) [homeassistant.setup] Setup of domain media_source took 1.0 seconds
892020-10-30 11:13:07 INFO (MainThread) [homeassistant.setup] Setup of domain tag took 1.1 seconds
902020-10-30 11:13:08 INFO (MainThread) [homeassistant.setup] Setup of domain counter took 1.1 seconds
912020-10-30 11:13:08 INFO (MainThread) [homeassistant.setup] Setup of domain input_datetime took 1.1 seconds
922020-10-30 11:13:08 INFO (MainThread) [homeassistant.setup] Setup of domain input_number took 1.0 seconds
932020-10-30 11:13:08 INFO (MainThread) [homeassistant.setup] Setup of domain input_text took 1.0 seconds
942020-10-30 11:13:08 INFO (MainThread) [homeassistant.setup] Setting up switch
952020-10-30 11:13:08 INFO (MainThread) [homeassistant.setup] Setup of domain switch took 0.0 seconds
962020-10-30 11:13:08 INFO (MainThread) [homeassistant.setup] Setup of domain python_script took 1.7 seconds
972020-10-30 11:13:08 INFO (MainThread) [homeassistant.setup] Setting up cover
982020-10-30 11:13:08 INFO (MainThread) [homeassistant.setup] Setup of domain cover took 0.0 seconds
992020-10-30 11:13:08 INFO (MainThread) [homeassistant.setup] Setup of domain zone took 2.0 seconds
1002020-10-30 11:13:08 INFO (MainThread) [homeassistant.setup] Setup of domain group took 2.4 seconds
1012020-10-30 11:13:08 INFO (MainThread) [homeassistant.setup] Setting up automation
1022020-10-30 11:13:09 INFO (MainThread) [homeassistant.components.switch] Setting up switch.template
1032020-10-30 11:13:09 INFO (MainThread) [homeassistant.components.cover] Setting up cover.template
1042020-10-30 11:13:09 INFO (MainThread) [homeassistant.components.cover] Setting up cover.template
1052020-10-30 11:13:09 INFO (MainThread) [homeassistant.setup] Setup of domain timer took 3.5 seconds
1062020-10-30 11:13:09 INFO (MainThread) [homeassistant.setup] Setup of domain input_select took 3.1 seconds
1072020-10-30 11:13:09 INFO (MainThread) [homeassistant.setup] Setup of domain input_boolean took 3.1 seconds
1082020-10-30 11:13:09 INFO (MainThread) [homeassistant.setup] Setup of domain automation took 0.6 seconds
1092020-10-30 11:13:09 ERROR (MainThread) [homeassistant.components.cover] Entity id already exists - ignoring: cover.shade
1102020-10-30 11:13:09 INFO (MainThread) [homeassistant.setup] Setting up script
1112020-10-30 11:13:09 INFO (MainThread) [homeassistant.setup] Setup of domain script took 0.0 seconds
1122020-10-30 11:13:50 INFO (MainThread) [homeassistant.setup] Setting up media_player
1132020-10-30 11:13:50 INFO (MainThread) [homeassistant.setup] Setup of domain media_player took 0.0 seconds
1142020-10-30 11:13:52 INFO (MainThread) [homeassistant.setup] Setting up knx
1152020-10-30 11:13:52 INFO (MainThread) [xknx.log] XKNX v0.15.0 starting automatic connection to KNX bus.
1162020-10-30 11:13:52 DEBUG (MainThread) [xknx.log] Searching on lo / 127.0.0.1
1172020-10-30 11:13:52 INFO (MainThread) [homeassistant.components.media_player] Setting up media_player.samsungtv_encrypted
1182020-10-30 11:13:52 INFO (SyncWorker_14) [custom_components.samsungtv_encrypted.media_player] Samsung TV 10.58.60.16:8080 added as 'Samsung TV Remote'
1192020-10-30 11:13:52 DEBUG (MainThread) [xknx.knx] Sending: <KNXIPFrame <KNXIPHeader HeaderLength="6" ProtocolVersion="16" KNXIPServiceType="KNXIPServiceType.SEARCH_REQUEST" Reserve="0" TotalLength="14" />
120 body="<SearchRequest discovery_endpoint="<HPAI 224.0.23.12:3671 />" />" />
1212020-10-30 11:13:52 DEBUG (MainThread) [xknx.log] Searching on eth0 / 10.58.60.89
1222020-10-30 11:13:52 DEBUG (MainThread) [xknx.raw_socket] Received from ('127.0.0.1', 3671): 06100201000e0801e000170c0e57
1232020-10-30 11:13:52 DEBUG (MainThread) [xknx.knx] Received: <KNXIPFrame <KNXIPHeader HeaderLength="6" ProtocolVersion="16" KNXIPServiceType="KNXIPServiceType.SEARCH_REQUEST" Reserve="0" TotalLength="14" />
124 body="<SearchRequest discovery_endpoint="<HPAI 224.0.23.12:3671 />" />" />
1252020-10-30 11:13:52 DEBUG (MainThread) [xknx.log] UNHANDLED: KNXIPServiceType.SEARCH_REQUEST
1262020-10-30 11:13:52 INFO (MainThread) [homeassistant.setup] Setting up updater
1272020-10-30 11:13:52 INFO (MainThread) [homeassistant.setup] Setup of domain updater took 0.0 seconds
1282020-10-30 11:13:52 INFO (MainThread) [homeassistant.setup] Setting up stream
1292020-10-30 11:13:53 INFO (MainThread) [homeassistant.setup] Setup of domain stream took 0.7 seconds
1302020-10-30 11:13:53 DEBUG (MainThread) [xknx.knx] Sending: <KNXIPFrame <KNXIPHeader HeaderLength="6" ProtocolVersion="16" KNXIPServiceType="KNXIPServiceType.SEARCH_REQUEST" Reserve="0" TotalLength="14" />
131 body="<SearchRequest discovery_endpoint="<HPAI 224.0.23.12:3671 />" />" />
1322020-10-30 11:13:53 INFO (MainThread) [xknx.log] Could not connect to an KNX/IP device on wlan0
1332020-10-30 11:13:53 DEBUG (MainThread) [xknx.log] Searching on docker0 / 172.17.0.1
1342020-10-30 11:13:53 INFO (SyncWorker_8) [homeassistant.loader] Loaded mjpeg from homeassistant.components.mjpeg
1352020-10-30 11:13:53 DEBUG (MainThread) [xknx.raw_socket] Received from ('10.58.60.11', 3671): 06100202004e08010a3a3c0b0e5736010200ffff000000837140049fe000170ccc1be080474f4d4454204b4e5820545020495000000000000000000000000000000000000a020202030204020702
1362020-10-30 11:13:53 DEBUG (MainThread) [xknx.knx] Received: <KNXIPFrame <KNXIPHeader HeaderLength="6" ProtocolVersion="16" KNXIPServiceType="KNXIPServiceType.SEARCH_RESPONSE" Reserve="0" TotalLength="78" />
137 body="<SearchResponse control_endpoint="<HPAI 10.58.60.11:3671 />" dibs="[
138<DIBDeviceInformation 
139	knx_medium="KNXMedium.TP1" 
140	programming_mode="False" 
141	individual_address="PhysicalAddress("15.15.255")" 
142	installation_number="0" 
143	project_number="0" 
144	serial_number="00:83:71:40:04:9f" 
145	multicast_address="224.0.23.12" 
146	mac_address="cc:1b:e0:80:47:4f" 
147	name="MDT KNX TP IP" />,
148<DIBSuppSVCFamilies families="[DIBServiceFamily.CORE version: 2, DIBServiceFamily.DEVICE_MANAGEMENT version: 2, DIBServiceFamily.TUNNELING version: 2, DIBServiceFamily.REMOTE_CONFIGURATION_DIAGNOSIS version: 2]" />
149]" />" />
1502020-10-30 11:13:53 DEBUG (MainThread) [xknx.raw_socket] Received from ('10.58.60.11', 3671): 06100202004e08010a3a3c0b0e5736010200ffff000000837140049fe000170ccc1be080474f4d4454204b4e5820545020495000000000000000000000000000000000000a020202030204020702
1512020-10-30 11:13:53 DEBUG (MainThread) [xknx.knx] Received: <KNXIPFrame <KNXIPHeader HeaderLength="6" ProtocolVersion="16" KNXIPServiceType="KNXIPServiceType.SEARCH_RESPONSE" Reserve="0" TotalLength="78" />
152 body="<SearchResponse control_endpoint="<HPAI 10.58.60.11:3671 />" dibs="[
153<DIBDeviceInformation 
154	knx_medium="KNXMedium.TP1" 
155	programming_mode="False" 
156	individual_address="PhysicalAddress("15.15.255")" 
157	installation_number="0" 
158	project_number="0" 
159	serial_number="00:83:71:40:04:9f" 
160	multicast_address="224.0.23.12" 
161	mac_address="cc:1b:e0:80:47:4f" 
162	name="MDT KNX TP IP" />,
163<DIBSuppSVCFamilies families="[DIBServiceFamily.CORE version: 2, DIBServiceFamily.DEVICE_MANAGEMENT version: 2, DIBServiceFamily.TUNNELING version: 2, DIBServiceFamily.REMOTE_CONFIGURATION_DIAGNOSIS version: 2]" />
164]" />" />
1652020-10-30 11:13:53 INFO (MainThread) [homeassistant.setup] Setting up zwave
1662020-10-30 11:13:53 INFO (MainThread) [homeassistant.setup] Setup of domain zwave took 0.0 seconds
1672020-10-30 11:13:53 INFO (MainThread) [homeassistant.setup] Setting up zeroconf
1682020-10-30 11:13:53 DEBUG (MainThread) [xknx.knx] Sending: <KNXIPFrame <KNXIPHeader HeaderLength="6" ProtocolVersion="16" KNXIPServiceType="KNXIPServiceType.SEARCH_REQUEST" Reserve="0" TotalLength="14" />
169 body="<SearchRequest discovery_endpoint="<HPAI 224.0.23.12:3671 />" />" />
1702020-10-30 11:13:53 DEBUG (MainThread) [xknx.log] Searching on hassio / 172.30.32.1
1712020-10-30 11:13:53 INFO (MainThread) [homeassistant.setup] Setting up camera
1722020-10-30 11:13:57 INFO (MainThread) [homeassistant.components.zwave] Z-Wave USB path is /dev/ttyACM0
1732020-10-30 11:13:57 INFO (MainThread) [homeassistant.setup] Setting up hacs
1742020-10-30 11:13:57 INFO (MainThread) [homeassistant.setup] Setup of domain hacs took 0.0 seconds
1752020-10-30 11:13:57 DEBUG (MainThread) [xknx.knx] Sending: <KNXIPFrame <KNXIPHeader HeaderLength="6" ProtocolVersion="16" KNXIPServiceType="KNXIPServiceType.SEARCH_REQUEST" Reserve="0" TotalLength="14" />
176 body="<SearchRequest discovery_endpoint="<HPAI 224.0.23.12:3671 />" />" />
1772020-10-30 11:13:57 INFO (MainThread) [xknx.log] Could not connect to an KNX/IP device on veth30adbe3
1782020-10-30 11:13:57 INFO (MainThread) [xknx.log] Could not connect to an KNX/IP device on veth55d99c4
1792020-10-30 11:13:57 INFO (MainThread) [xknx.log] Could not connect to an KNX/IP device on veth0c38afa
1802020-10-30 11:13:57 INFO (MainThread) [xknx.log] Could not connect to an KNX/IP device on veth8df356a
1812020-10-30 11:13:57 INFO (MainThread) [xknx.log] Could not connect to an KNX/IP device on veth7e1a233
1822020-10-30 11:13:57 INFO (MainThread) [xknx.log] Could not connect to an KNX/IP device on vethf1ae2a6
1832020-10-30 11:13:57 INFO (MainThread) [xknx.log] Could not connect to an KNX/IP device on veth098f059
1842020-10-30 11:13:57 INFO (MainThread) [xknx.log] Could not connect to an KNX/IP device on veth3980955
1852020-10-30 11:13:57 INFO (MainThread) [xknx.log] Could not connect to an KNX/IP device on veth5cc289c
1862020-10-30 11:13:57 INFO (MainThread) [xknx.log] Could not connect to an KNX/IP device on vethccde39c
1872020-10-30 11:13:57 DEBUG (MainThread) [xknx.log] Using interface: eth0
1882020-10-30 11:13:57 DEBUG (MainThread) [xknx.log] Starting tunnel from 10.58.60.89 to 10.58.60.11:3671
1892020-10-30 11:13:57 INFO (MainThread) [homeassistant.setup] Setup of domain zeroconf took 4.1 seconds
1902020-10-30 11:13:58 INFO (SyncWorker_22) [homeassistant.loader] Loaded workday from homeassistant.components.workday
1912020-10-30 11:13:58 INFO (MainThread) [homeassistant.setup] Setting up ipp
1922020-10-30 11:13:58 INFO (MainThread) [homeassistant.setup] Setup of domain ipp took 0.0 seconds
1932020-10-30 11:13:58 INFO (MainThread) [custom_components.visonic.pyvisonic] Initialising Protocol - Component Version 0.5.0.1
1942020-10-30 11:13:58 INFO (MainThread) [homeassistant.setup] Setting up visonic
1952020-10-30 11:13:58 INFO (MainThread) [homeassistant.setup] Setup of domain visonic took 0.0 seconds
1962020-10-30 11:13:58 INFO (MainThread) [homeassistant.setup] Setting up sonos
1972020-10-30 11:13:58 INFO (MainThread) [homeassistant.setup] Setup of domain sonos took 0.0 seconds
1982020-10-30 11:13:58 DEBUG (MainThread) [xknx.knx] Sending: <KNXIPFrame <KNXIPHeader HeaderLength="6" ProtocolVersion="16" KNXIPServiceType="KNXIPServiceType.CONNECT_REQUEST" Reserve="0" TotalLength="26" />
199 body="<ConnectRequest control_endpoint="<HPAI 10.58.60.89:35606 />" data_endpoint="<HPAI 10.58.60.89:35606 />" request_type="ConnectRequestType.TUNNEL_CONNECTION" />" />
2002020-10-30 11:13:58 INFO (MainThread) [homeassistant.setup] Setup of domain camera took 4.5 seconds
2012020-10-30 11:13:58 INFO (MainThread) [homeassistant.setup] Setting up synology_dsm
2022020-10-30 11:13:58 INFO (MainThread) [homeassistant.setup] Setup of domain synology_dsm took 0.0 seconds
2032020-10-30 11:13:58 INFO (MainThread) [homeassistant.setup] Setting up binary_sensor
2042020-10-30 11:13:58 INFO (MainThread) [homeassistant.setup] Setup of domain binary_sensor took 0.0 seconds
2052020-10-30 11:13:58 DEBUG (MainThread) [xknx.raw_socket] Received from ('10.58.60.11', 3671): 061002060014110008010a3a3c0b0e570404fff2
2062020-10-30 11:13:58 DEBUG (MainThread) [xknx.knx] Received: <KNXIPFrame <KNXIPHeader HeaderLength="6" ProtocolVersion="16" KNXIPServiceType="KNXIPServiceType.CONNECT_RESPONSE" Reserve="0" TotalLength="20" />
207 body="<ConnectResponse communication_channel="17" status_code="ErrorCode.E_NO_ERROR" control_endpoint="<HPAI 10.58.60.11:3671 />" request_type="ConnectRequestType.TUNNEL_CONNECTION" identifier="65522" />" />
2082020-10-30 11:13:58 INFO (MainThread) [homeassistant.components.camera] Setting up camera.mjpeg
2092020-10-30 11:13:59 INFO (MainThread) [homeassistant.components.binary_sensor] Setting up binary_sensor.ping
2102020-10-30 11:13:59 INFO (MainThread) [homeassistant.components.binary_sensor] Setting up binary_sensor.workday
2112020-10-30 11:13:59 INFO (MainThread) [custom_components.hacs] 
212-------------------------------------------------------------------
213HACS (Home Assistant Community Store)
214
215Version: 1.6.1
216This is a custom integration
217If you have any issues with this you need to open an issue here:
218https://github.com/hacs/integration/issues
219-------------------------------------------------------------------
220
2212020-10-30 11:13:59 INFO (MainThread) [custom_components.hacs] Setup task HacsSetupTask.WEBSOCKET
2222020-10-30 11:13:59 INFO (MainThread) [custom_components.hacs] Setup task HacsSetupTask.FRONTEND
2232020-10-30 11:13:59 INFO (SyncWorker_21) [homeassistant.loader] Loaded climate from homeassistant.components.climate
2242020-10-30 11:13:59 INFO (SyncWorker_12) [homeassistant.loader] Loaded fan from homeassistant.components.fan
2252020-10-30 11:13:59 DEBUG (MainThread) [xknx.log] Tunnel established communication_channel=17, id=65522
2262020-10-30 11:13:59 DEBUG (MainThread) [xknx.state_updater] StateUpdater initializing values
2272020-10-30 11:13:59 DEBUG (MainThread) [xknx.state_updater] StateUpdater registered StateTrackerType.EXPIRE 60 for <RemoteValueScaling device_name="Slaapkamer M&M Rolgordijn Links Open/Dicht" feature_name="Position" None/GroupAddress("3/2/0")/None/None/>
2282020-10-30 11:13:59 DEBUG (MainThread) [xknx.state_updater] StateUpdater initializing 3/2/0 for Slaapkamer M&M Rolgordijn Links Open/Dicht - Position
2292020-10-30 11:13:59 DEBUG (MainThread) [xknx.state_updater] StateUpdater scheduled reading 3/2/0 for Slaapkamer M&M Rolgordijn Links Open/Dicht - Position
2302020-10-30 11:13:59 DEBUG (MainThread) [xknx.state_updater] StateUpdater registered StateTrackerType.EXPIRE 60 for <RemoteValueScaling device_name="Slaapkamer M&M Rolgordijn Rechts Open/Dicht" feature_name="Position" None/GroupAddress("3/2/1")/None/None/>
2312020-10-30 11:13:59 DEBUG (MainThread) [xknx.state_updater] StateUpdater initializing 3/2/1 for Slaapkamer M&M Rolgordijn Rechts Open/Dicht - Position
2322020-10-30 11:13:59 DEBUG (MainThread) [xknx.state_updater] StateUpdater scheduled reading 3/2/1 for Slaapkamer M&M Rolgordijn Rechts Open/Dicht - Position
2332020-10-30 11:13:59 DEBUG (MainThread) [xknx.state_updater] StateUpdater registered StateTrackerType.EXPIRE 60 for <RemoteValueSwitch device_name="Lichtbalk WC Boven" feature_name="State" GroupAddress("1/1/1")/GroupAddress("1/4/0")/None/None/>
2342020-10-30 11:13:59 DEBUG (MainThread) [xknx.state_updater] StateUpdater initializing 1/4/0 for Lichtbalk WC Boven - State
2352020-10-30 11:13:59 DEBUG (MainThread) [xknx.state_updater] StateUpdater scheduled reading 1/4/0 for Lichtbalk WC Boven - State
2362020-10-30 11:13:59 DEBUG (MainThread) [xknx.state_updater] StateUpdater registered StateTrackerType.EXPIRE 60 for <RemoteValueScaling device_name="Lichtbalk WC Boven" feature_name="Brightness" GroupAddress("1/2/1")/GroupAddress("1/3/0")/None/None/>
2372020-10-30 11:13:59 DEBUG (MainThread) [xknx.state_updater] StateUpdater initializing 1/3/0 for Lichtbalk WC Boven - Brightness
2382020-10-30 11:13:59 DEBUG (MainThread) [xknx.state_updater] StateUpdater scheduled reading 1/3/0 for Lichtbalk WC Boven - Brightness
2392020-10-30 11:13:59 DEBUG (MainThread) [xknx.state_updater] StateUpdater registered StateTrackerType.EXPIRE 60 for <RemoteValueSwitch device_name="Lichtbalk Badkamer" feature_name="State" GroupAddress("1/1/2")/GroupAddress("1/4/1")/None/None/>
2402020-10-30 11:13:59 DEBUG (MainThread) [xknx.state_updater] StateUpdater initializing 1/4/1 for Lichtbalk Badkamer - State
2412020-10-30 11:13:59 DEBUG (MainThread) [xknx.state_updater] StateUpdater scheduled reading 1/4/1 for Lichtbalk Badkamer - State
2422020-10-30 11:13:59 DEBUG (MainThread) [xknx.state_updater] StateUpdater registered StateTrackerType.EXPIRE 60 for <RemoteValueScaling device_name="Lichtbalk Badkamer" feature_name="Brightness" GroupAddress("1/2/2")/GroupAddress("1/3/1")/None/None/>
2432020-10-30 11:13:59 DEBUG (MainThread) [xknx.state_updater] StateUpdater initializing 1/3/1 for Lichtbalk Badkamer - Brightness
2442020-10-30 11:13:59 DEBUG (MainThread) [xknx.state_updater] StateUpdater scheduled reading 1/3/1 for Lichtbalk Badkamer - Brightness
2452020-10-30 11:13:59 DEBUG (MainThread) [xknx.state_updater] StateUpdater registered StateTrackerType.EXPIRE 60 for <RemoteValueSwitch device_name="Slaapkamer Valentijn PIR" feature_name="State" None/GroupAddress("5/0/2")/None/None/>
2462020-10-30 11:13:59 DEBUG (MainThread) [xknx.state_updater] StateUpdater initializing 5/0/2 for Slaapkamer Valentijn PIR - State
2472020-10-30 11:13:59 DEBUG (MainThread) [xknx.state_updater] StateUpdater scheduled reading 5/0/2 for Slaapkamer Valentijn PIR - State
2482020-10-30 11:13:59 DEBUG (MainThread) [xknx.state_updater] StateUpdater registered StateTrackerType.EXPIRE 60 for <RemoteValueSwitch device_name="Slaapkamer Friso PIR" feature_name="State" None/GroupAddress("5/0/6")/None/None/>
2492020-10-30 11:13:59 DEBUG (MainThread) [xknx.state_updater] StateUpdater initializing 5/0/6 for Slaapkamer Friso PIR - State
2502020-10-30 11:13:59 DEBUG (MainThread) [xknx.state_updater] StateUpdater scheduled reading 5/0/6 for Slaapkamer Friso PIR - State
2512020-10-30 11:13:59 DEBUG (MainThread) [xknx.state_updater] StateUpdater registered StateTrackerType.EXPIRE 60 for <RemoteValueSwitch device_name="Slaapkamer M&M PIR" feature_name="State" None/GroupAddress("5/0/12")/None/None/>
2522020-10-30 11:13:59 INFO (SyncWorker_2) [homeassistant.loader] Loaded lock from homeassistant.components.lock
2532020-10-30 11:13:59 DEBUG (MainThread) [xknx.state_updater] StateUpdater initializing 5/0/12 for Slaapkamer M&M PIR - State
2542020-10-30 11:13:59 DEBUG (MainThread) [xknx.state_updater] StateUpdater scheduled reading 5/0/12 for Slaapkamer M&M PIR - State
2552020-10-30 11:13:59 DEBUG (MainThread) [xknx.state_updater] StateUpdater registered StateTrackerType.EXPIRE 60 for <RemoteValueSwitch device_name="Gang Boven PIR" feature_name="State" None/GroupAddress("5/0/8")/None/None/>
2562020-10-30 11:13:59 DEBUG (MainThread) [xknx.state_updater] StateUpdater initializing 5/0/8 for Gang Boven PIR - State
2572020-10-30 11:13:59 DEBUG (MainThread) [xknx.state_updater] StateUpdater scheduled reading 5/0/8 for Gang Boven PIR - State
2582020-10-30 11:13:59 DEBUG (MainThread) [xknx.state_updater] StateUpdater registered StateTrackerType.EXPIRE 60 for <RemoteValueSwitch device_name="WC Boven Radar" feature_name="State" None/GroupAddress("5/0/3")/None/None/>
2592020-10-30 11:13:59 DEBUG (MainThread) [xknx.state_updater] StateUpdater initializing 5/0/3 for WC Boven Radar - State
2602020-10-30 11:13:59 DEBUG (MainThread) [xknx.state_updater] StateUpdater scheduled reading 5/0/3 for WC Boven Radar - State
2612020-10-30 11:13:59 DEBUG (MainThread) [xknx.state_updater] StateUpdater registered StateTrackerType.EXPIRE 60 for <RemoteValueSensor device_name="Slaapkamer Valentijn Temperatuur" feature_name="Value" None/GroupAddress("5/0/0")/None/None/>
2622020-10-30 11:13:59 DEBUG (MainThread) [xknx.state_updater] StateUpdater initializing 5/0/0 for Slaapkamer Valentijn Temperatuur - Value
2632020-10-30 11:13:59 DEBUG (MainThread) [xknx.state_updater] StateUpdater scheduled reading 5/0/0 for Slaapkamer Valentijn Temperatuur - Value
2642020-10-30 11:13:59 DEBUG (MainThread) [xknx.state_updater] StateUpdater registered StateTrackerType.EXPIRE 60 for <RemoteValueSensor device_name="Slaapkamer Valentijn Lux" feature_name="Value" None/GroupAddress("5/0/1")/None/None/>
2652020-10-30 11:13:59 DEBUG (MainThread) [xknx.state_updater] StateUpdater initializing 5/0/1 for Slaapkamer Valentijn Lux - Value
2662020-10-30 11:13:59 DEBUG (MainThread) [xknx.state_updater] StateUpdater scheduled reading 5/0/1 for Slaapkamer Valentijn Lux - Value
2672020-10-30 11:13:59 DEBUG (MainThread) [xknx.state_updater] StateUpdater registered StateTrackerType.EXPIRE 60 for <RemoteValueSensor device_name="Slaapkamer Friso Temperatuur" feature_name="Value" None/GroupAddress("5/0/4")/None/None/>
2682020-10-30 11:13:59 DEBUG (MainThread) [xknx.state_updater] StateUpdater initializing 5/0/4 for Slaapkamer Friso Temperatuur - Value
2692020-10-30 11:13:59 DEBUG (MainThread) [xknx.state_updater] StateUpdater scheduled reading 5/0/4 for Slaapkamer Friso Temperatuur - Value
2702020-10-30 11:13:59 DEBUG (MainThread) [xknx.state_updater] StateUpdater registered StateTrackerType.EXPIRE 60 for <RemoteValueSensor device_name="Slaapkamer Friso Lux" feature_name="Value" None/GroupAddress("5/0/5")/None/None/>
2712020-10-30 11:13:59 DEBUG (MainThread) [xknx.state_updater] StateUpdater initializing 5/0/5 for Slaapkamer Friso Lux - Value
2722020-10-30 11:13:59 DEBUG (MainThread) [xknx.state_updater] StateUpdater scheduled reading 5/0/5 for Slaapkamer Friso Lux - Value
2732020-10-30 11:13:59 DEBUG (MainThread) [xknx.state_updater] StateUpdater registered StateTrackerType.EXPIRE 60 for <RemoteValueSensor device_name="Gang Boven Temperatuur" feature_name="Value" None/GroupAddress("5/0/7")/None/None/>
2742020-10-30 11:13:59 DEBUG (MainThread) [xknx.state_updater] StateUpdater initializing 5/0/7 for Gang Boven Temperatuur - Value
2752020-10-30 11:13:59 DEBUG (MainThread) [xknx.state_updater] StateUpdater scheduled reading 5/0/7 for Gang Boven Temperatuur - Value
2762020-10-30 11:13:59 DEBUG (MainThread) [xknx.state_updater] StateUpdater registered StateTrackerType.EXPIRE 60 for <RemoteValueSensor device_name="Gang Boven Lux" feature_name="Value" None/GroupAddress("5/0/9")/None/None/>
2772020-10-30 11:13:59 DEBUG (MainThread) [xknx.state_updater] StateUpdater initializing 5/0/9 for Gang Boven Lux - Value
2782020-10-30 11:13:59 DEBUG (MainThread) [xknx.state_updater] StateUpdater scheduled reading 5/0/9 for Gang Boven Lux - Value
2792020-10-30 11:13:59 DEBUG (MainThread) [xknx.state_updater] StateUpdater registered StateTrackerType.EXPIRE 60 for <RemoteValueSensor device_name="Slaapkamer M&M Temperatuur" feature_name="Value" None/GroupAddress("5/0/11")/None/None/>
2802020-10-30 11:13:59 DEBUG (MainThread) [xknx.state_updater] StateUpdater initializing 5/0/11 for Slaapkamer M&M Temperatuur - Value
2812020-10-30 11:13:59 DEBUG (MainThread) [xknx.state_updater] StateUpdater scheduled reading 5/0/11 for Slaapkamer M&M Temperatuur - Value
2822020-10-30 11:13:59 DEBUG (MainThread) [xknx.state_updater] StateUpdater registered StateTrackerType.EXPIRE 60 for <RemoteValueSensor device_name="Slaapkamer M&M Lux" feature_name="Value" None/GroupAddress("5/0/10")/None/None/>
2832020-10-30 11:13:59 DEBUG (MainThread) [xknx.state_updater] StateUpdater initializing 5/0/10 for Slaapkamer M&M Lux - Value
2842020-10-30 11:13:59 DEBUG (MainThread) [xknx.state_updater] StateUpdater scheduled reading 5/0/10 for Slaapkamer M&M Lux - Value
2852020-10-30 11:13:59 INFO (MainThread) [homeassistant.setup] Setup of domain knx took 6.6 seconds
2862020-10-30 11:13:59 INFO (SyncWorker_16) [homeassistant.loader] Loaded light from homeassistant.components.light
2872020-10-30 11:14:00 INFO (SyncWorker_4) [custom_components.visonic.pyvisonic] Setting TCP socket Options
2882020-10-30 11:14:00 INFO (SyncWorker_14) [homeassistant.loader] Loaded statistics from homeassistant.components.statistics
2892020-10-30 11:14:00 INFO (MainThread) [homeassistant.components.cover] Setting up cover.zwave
2902020-10-30 11:14:00 INFO (MainThread) [homeassistant.components.switch] Setting up switch.zwave
2912020-10-30 11:14:00 INFO (MainThread) [homeassistant.components.binary_sensor] Setting up binary_sensor.zwave
2922020-10-30 11:14:00 DEBUG (MainThread) [xknx.log] Sync Slaapkamer M&M Rolgordijn Links Open/Dicht - Position
2932020-10-30 11:14:00 DEBUG (MainThread) [xknx.log] Sync Slaapkamer M&M Rolgordijn Rechts Open/Dicht - Position
2942020-10-30 11:14:00 DEBUG (MainThread) [xknx.log] Sync Lichtbalk WC Boven - State
2952020-10-30 11:14:00 DEBUG (MainThread) [xknx.log] Sync Lichtbalk WC Boven - Brightness
2962020-10-30 11:14:00 DEBUG (MainThread) [xknx.log] Sync Lichtbalk Badkamer - State
2972020-10-30 11:14:00 DEBUG (MainThread) [xknx.log] Sync Lichtbalk Badkamer - Brightness
2982020-10-30 11:14:00 DEBUG (MainThread) [xknx.log] Sync Slaapkamer Valentijn PIR - State
2992020-10-30 11:14:00 DEBUG (MainThread) [xknx.log] Sync Slaapkamer Friso PIR - State
3002020-10-30 11:14:00 DEBUG (MainThread) [xknx.log] Sync Slaapkamer M&M PIR - State
3012020-10-30 11:14:00 DEBUG (MainThread) [xknx.log] Sync Gang Boven PIR - State
3022020-10-30 11:14:00 DEBUG (MainThread) [xknx.log] Sync WC Boven Radar - State
3032020-10-30 11:14:00 DEBUG (MainThread) [xknx.log] Sync Slaapkamer Valentijn Temperatuur - Value
3042020-10-30 11:14:00 DEBUG (MainThread) [xknx.log] Sync Slaapkamer Valentijn Lux - Value
3052020-10-30 11:14:00 DEBUG (MainThread) [xknx.log] Sync Slaapkamer Friso Temperatuur - Value
3062020-10-30 11:14:00 DEBUG (MainThread) [xknx.log] Sync Slaapkamer Friso Lux - Value
3072020-10-30 11:14:00 DEBUG (MainThread) [xknx.log] Sync Gang Boven Temperatuur - Value
3082020-10-30 11:14:00 DEBUG (MainThread) [xknx.log] Sync Gang Boven Lux - Value
3092020-10-30 11:14:00 DEBUG (MainThread) [xknx.log] Sync Slaapkamer M&M Temperatuur - Value
3102020-10-30 11:14:00 DEBUG (MainThread) [xknx.log] Sync Slaapkamer M&M Lux - Value
3112020-10-30 11:14:00 INFO (MainThread) [homeassistant.setup] Setting up ssdp
3122020-10-30 11:14:00 INFO (MainThread) [homeassistant.setup] Setup of domain ssdp took 0.0 seconds
3132020-10-30 11:14:00 INFO (MainThread) [homeassistant.setup] Setting up climate
3142020-10-30 11:14:00 INFO (MainThread) [homeassistant.setup] Setup of domain climate took 0.0 seconds
3152020-10-30 11:14:00 INFO (MainThread) [homeassistant.setup] Setting up fan
3162020-10-30 11:14:00 INFO (MainThread) [homeassistant.setup] Setup of domain fan took 0.0 seconds
3172020-10-30 11:14:00 INFO (MainThread) [homeassistant.setup] Setting up lock
3182020-10-30 11:14:00 INFO (MainThread) [homeassistant.setup] Setup of domain lock took 0.0 seconds
3192020-10-30 11:14:00 INFO (MainThread) [homeassistant.setup] Setting up light
3202020-10-30 11:14:00 INFO (MainThread) [custom_components.hacs] Setup task HacsSetupTask.CATEGORIES
3212020-10-30 11:14:00 INFO (SyncWorker_18) [homeassistant.loader] Loaded notify from homeassistant.components.notify
3222020-10-30 11:14:00 INFO (SyncWorker_9) [homeassistant.loader] Loaded weather from homeassistant.components.weather
3232020-10-30 11:14:00 INFO (SyncWorker_13) [homeassistant.loader] Loaded plex from homeassistant.components.plex
3242020-10-30 11:14:00 INFO (SyncWorker_10) [homeassistant.loader] Loaded tts from homeassistant.components.tts
3252020-10-30 11:14:00 INFO (MainThread) [homeassistant.components.media_player] Setting up media_player.sonos
3262020-10-30 11:14:00 INFO (MainThread) [homeassistant.components.binary_sensor] Setting up binary_sensor.updater
3272020-10-30 11:14:00 DEBUG (MainThread) [xknx.telegram] <Telegram group_address="GroupAddress("3/2/0")", payload="None" telegramtype="TelegramType.GROUP_READ" direction="TelegramDirection.OUTGOING" />
3282020-10-30 11:14:00 DEBUG (MainThread) [xknx.knx] Sending: <KNXIPFrame <KNXIPHeader HeaderLength="6" ProtocolVersion="16" KNXIPServiceType="KNXIPServiceType.TUNNELLING_REQUEST" Reserve="0" TotalLength="21" />
329 body="<TunnellingRequest communication_channel_id="17" sequence_counter="0" cemi="<CEMIFrame SourceAddress="PhysicalAddress("15.15.242")" DestinationAddress="GroupAddress("3/2/0")" Flags="1011110011100000" Command="APCICommand.GROUP_READ" payload="None" />" />" />
3302020-10-30 11:14:00 INFO (MainThread) [homeassistant.components.cover] Setting up cover.knx
3312020-10-30 11:14:00 INFO (MainThread) [homeassistant.components.binary_sensor] Setting up binary_sensor.knx
3322020-10-30 11:14:00 INFO (MainThread) [homeassistant.components.switch] Setting up switch.knx
3332020-10-30 11:14:00 INFO (MainThread) [homeassistant.components.scene] Setting up scene.knx
3342020-10-30 11:14:01 INFO (MainThread) [homeassistant.components.climate] Setting up climate.zwave
3352020-10-30 11:14:01 INFO (MainThread) [homeassistant.components.fan] Setting up fan.zwave
3362020-10-30 11:14:01 INFO (MainThread) [homeassistant.components.lock] Setting up lock.zwave
3372020-10-30 11:14:01 INFO (MainThread) [homeassistant.setup] Setting up notify
3382020-10-30 11:14:01 INFO (MainThread) [homeassistant.setup] Setup of domain notify took 0.0 seconds
3392020-10-30 11:14:01 INFO (MainThread) [homeassistant.setup] Setting up weather
3402020-10-30 11:14:01 INFO (MainThread) [homeassistant.setup] Setup of domain weather took 0.0 seconds
3412020-10-30 11:14:01 DEBUG (MainThread) [xknx.raw_socket] Received from ('10.58.60.11', 3671): 06100421000a04110000
3422020-10-30 11:14:01 DEBUG (MainThread) [xknx.knx] Received: <KNXIPFrame <KNXIPHeader HeaderLength="6" ProtocolVersion="16" KNXIPServiceType="KNXIPServiceType.TUNNELLING_ACK" Reserve="0" TotalLength="10" />
343 body="<TunnellingAck communication_channel_id="17" sequence_counter="0" status_code="ErrorCode.E_NO_ERROR" />" />
3442020-10-30 11:14:01 INFO (MainThread) [homeassistant.setup] Setup of domain light took 0.4 seconds
3452020-10-30 11:14:01 DEBUG (MainThread) [xknx.raw_socket] Received from ('10.58.60.11', 3671): 061004200015041100002e00bce0fff21a00010000
3462020-10-30 11:14:01 DEBUG (MainThread) [xknx.knx] Received: <KNXIPFrame <KNXIPHeader HeaderLength="6" ProtocolVersion="16" KNXIPServiceType="KNXIPServiceType.TUNNELLING_REQUEST" Reserve="0" TotalLength="21" />
347 body="<TunnellingRequest communication_channel_id="17" sequence_counter="0" cemi="<CEMIFrame SourceAddress="PhysicalAddress("15.15.242")" DestinationAddress="GroupAddress("3/2/0")" Flags="1011110011100000" Command="APCICommand.GROUP_READ" payload="<DPTBinary value="0" />" />" />" />
3482020-10-30 11:14:01 DEBUG (MainThread) [xknx.knx] Sending: <KNXIPFrame <KNXIPHeader HeaderLength="6" ProtocolVersion="16" KNXIPServiceType="KNXIPServiceType.TUNNELLING_ACK" Reserve="0" TotalLength="10" />
349 body="<TunnellingAck communication_channel_id="17" sequence_counter="0" status_code="ErrorCode.E_NO_ERROR" />" />
3502020-10-30 11:14:01 INFO (SyncWorker_4) [custom_components.visonic.pyvisonic] Buffer Flushed and Didn't receive data! [Timeout]
3512020-10-30 11:14:01 INFO (MainThread) [homeassistant.setup] Setting up sensor
3522020-10-30 11:14:01 INFO (MainThread) [homeassistant.setup] Setup of domain sensor took 0.0 seconds
3532020-10-30 11:14:01 INFO (MainThread) [homeassistant.components.climate] Setting up climate.knx
3542020-10-30 11:14:01 DEBUG (MainThread) [xknx.raw_socket] Received from ('10.58.60.11', 3671): 061004200016041101002900bce011041a0002004000
3552020-10-30 11:14:01 DEBUG (MainThread) [xknx.knx] Received: <KNXIPFrame <KNXIPHeader HeaderLength="6" ProtocolVersion="16" KNXIPServiceType="KNXIPServiceType.TUNNELLING_REQUEST" Reserve="0" TotalLength="22" />
356 body="<TunnellingRequest communication_channel_id="17" sequence_counter="1" cemi="<CEMIFrame SourceAddress="PhysicalAddress("1.1.4")" DestinationAddress="GroupAddress("3/2/0")" Flags="1011110011100000" Command="APCICommand.GROUP_RESPONSE" payload="<DPTArray value="[0x0]" />" />" />" />
3572020-10-30 11:14:01 DEBUG (MainThread) [xknx.knx] Sending: <KNXIPFrame <KNXIPHeader HeaderLength="6" ProtocolVersion="16" KNXIPServiceType="KNXIPServiceType.TUNNELLING_ACK" Reserve="0" TotalLength="10" />
358 body="<TunnellingAck communication_channel_id="17" sequence_counter="1" status_code="ErrorCode.E_NO_ERROR" />" />
3592020-10-30 11:14:01 INFO (MainThread) [homeassistant.setup] Setting up mobile_app
3602020-10-30 11:14:01 INFO (MainThread) [homeassistant.components.light] Setting up light.zwave
3612020-10-30 11:14:01 INFO (MainThread) [custom_components.visonic.pyvisonic] [Settings] Force Standard set to False
3622020-10-30 11:14:01 INFO (MainThread) [custom_components.visonic.pyvisonic] [Settings] Force Auto Enroll set to False
3632020-10-30 11:14:01 INFO (MainThread) [custom_components.visonic.pyvisonic] [Settings] Force Auto Sync Time set to True
3642020-10-30 11:14:01 INFO (MainThread) [custom_components.visonic.pyvisonic] [Settings] Language set to EN
3652020-10-30 11:14:01 INFO (MainThread) [custom_components.visonic.pyvisonic] [Settings] Remote Arm set to True
3662020-10-30 11:14:01 INFO (MainThread) [custom_components.visonic.pyvisonic] [Settings] Remote DisArm set to True
3672020-10-30 11:14:01 INFO (MainThread) [custom_components.visonic.pyvisonic] [Settings] Enable Sensor Bypass set to False
3682020-10-30 11:14:01 INFO (MainThread) [custom_components.visonic.pyvisonic] [Settings] Motion Off Delay set to 120
3692020-10-30 11:14:01 INFO (MainThread) [custom_components.visonic.pyvisonic] [Settings] Override Code in new settings, the length is 0   isdigit = False
3702020-10-30 11:14:01 INFO (MainThread) [custom_components.visonic.pyvisonic] [Settings]     Override Code cleared
3712020-10-30 11:14:01 INFO (MainThread) [custom_components.visonic.pyvisonic] [Settings] Force Numeric Keypad set to False
3722020-10-30 11:14:01 INFO (MainThread) [custom_components.visonic.pyvisonic] [Settings] Arm Without Code set to False
3732020-10-30 11:14:01 INFO (MainThread) [custom_components.visonic.pyvisonic] [Settings] Siren Trigger List set to ['intruder']
3742020-10-30 11:14:01 INFO (MainThread) [custom_components.visonic.pyvisonic] [Settings] B0 Enable set to False
3752020-10-30 11:14:01 INFO (MainThread) [custom_components.visonic.pyvisonic] [Settings] B0 Min Interval set to 5
3762020-10-30 11:14:01 INFO (MainThread) [custom_components.visonic.pyvisonic] [Settings] B0 Max Wait Time set to 30
3772020-10-30 11:14:02 INFO (MainThread) [homeassistant.components.sensor] Setting up sensor.dsmr
3782020-10-30 11:14:02 INFO (MainThread) [homeassistant.components.sensor] Setting up sensor.time_date
3792020-10-30 11:14:02 INFO (MainThread) [homeassistant.components.sensor] Setting up sensor.statistics
3802020-10-30 11:14:02 INFO (MainThread) [homeassistant.components.sensor] Setting up sensor.statistics
3812020-10-30 11:14:02 INFO (MainThread) [homeassistant.components.sensor] Setting up sensor.template
3822020-10-30 11:14:02 INFO (MainThread) [homeassistant.components.sensor] Setting up sensor.template
3832020-10-30 11:14:02 INFO (MainThread) [homeassistant.components.sensor] Setting up sensor.template
3842020-10-30 11:14:02 DEBUG (MainThread) [xknx.telegram] <Telegram group_address="GroupAddress("3/2/0")", payload="<DPTArray value="[0x0]" />" telegramtype="TelegramType.GROUP_RESPONSE" direction="TelegramDirection.INCOMING" />
3852020-10-30 11:14:02 INFO (MainThread) [custom_components.visonic.pyvisonic] [Connection] Connected to local Protocol handler and Transport Layer
3862020-10-30 11:14:02 INFO (MainThread) [custom_components.visonic.pyvisonic] [StartDownload] Starting download mode
3872020-10-30 11:14:02 INFO (MainThread) [homeassistant.setup] Setting up mqtt
3882020-10-30 11:14:02 INFO (MainThread) [homeassistant.setup] Setup of domain mqtt took 0.0 seconds
3892020-10-30 11:14:02 ERROR (MainThread) [homeassistant.setup] Setup failed for mqtt: Integration failed to initialize.
3902020-10-30 11:14:02 INFO (SyncWorker_19) [homeassistant.loader] Loaded alarm_control_panel from homeassistant.components.alarm_control_panel
3912020-10-30 11:14:02 INFO (MainThread) [homeassistant.components.sensor] Setting up sensor.dsmr
3922020-10-30 11:14:02 INFO (MainThread) [homeassistant.components.sensor] Setting up sensor.zwave
3932020-10-30 11:14:02 INFO (MainThread) [homeassistant.components.notify] Setting up notify.knx
3942020-10-30 11:14:02 INFO (MainThread) [homeassistant.components.weather] Setting up weather.knx
3952020-10-30 11:14:02 INFO (MainThread) [homeassistant.components.updater] Submitted analytics to Home Assistant servers. Information submitted includes {}
3962020-10-30 11:14:02 DEBUG (MainThread) [xknx.telegram] <Telegram group_address="GroupAddress("3/2/1")", payload="None" telegramtype="TelegramType.GROUP_READ" direction="TelegramDirection.OUTGOING" />
3972020-10-30 11:14:02 DEBUG (MainThread) [xknx.knx] Sending: <KNXIPFrame <KNXIPHeader HeaderLength="6" ProtocolVersion="16" KNXIPServiceType="KNXIPServiceType.TUNNELLING_REQUEST" Reserve="0" TotalLength="21" />
398 body="<TunnellingRequest communication_channel_id="17" sequence_counter="1" cemi="<CEMIFrame SourceAddress="PhysicalAddress("15.15.242")" DestinationAddress="GroupAddress("3/2/1")" Flags="1011110011100000" Command="APCICommand.GROUP_READ" payload="None" />" />" />
3992020-10-30 11:14:02 INFO (MainThread) [homeassistant.components.light] Setting up light.knx
4002020-10-30 11:14:02 ERROR (MainThread) [homeassistant.setup] Unable to prepare setup for platform mqtt.sensor: Unable to set up component.
4012020-10-30 11:14:03 INFO (MainThread) [homeassistant.setup] Setting up cast
4022020-10-30 11:14:03 INFO (MainThread) [homeassistant.setup] Setup of domain cast took 0.0 seconds
4032020-10-30 11:14:03 INFO (MainThread) [homeassistant.setup] Setting up alarm_control_panel
4042020-10-30 11:14:03 INFO (MainThread) [homeassistant.setup] Setup of domain alarm_control_panel took 0.0 seconds
4052020-10-30 11:14:03 INFO (MainThread) [homeassistant.components.sensor] Setting up sensor.knx
4062020-10-30 11:14:03 DEBUG (MainThread) [xknx.raw_socket] Received from ('10.58.60.11', 3671): 06100421000a04110100
4072020-10-30 11:14:03 DEBUG (MainThread) [xknx.knx] Received: <KNXIPFrame <KNXIPHeader HeaderLength="6" ProtocolVersion="16" KNXIPServiceType="KNXIPServiceType.TUNNELLING_ACK" Reserve="0" TotalLength="10" />
408 body="<TunnellingAck communication_channel_id="17" sequence_counter="1" status_code="ErrorCode.E_NO_ERROR" />" />
4092020-10-30 11:14:03 INFO (MainThread) [homeassistant.setup] Setup of domain mobile_app took 1.4 seconds
4102020-10-30 11:14:03 DEBUG (MainThread) [xknx.raw_socket] Received from ('10.58.60.11', 3671): 061004200015041102002e00bce0fff21a01010000
4112020-10-30 11:14:03 DEBUG (MainThread) [xknx.knx] Received: <KNXIPFrame <KNXIPHeader HeaderLength="6" ProtocolVersion="16" KNXIPServiceType="KNXIPServiceType.TUNNELLING_REQUEST" Reserve="0" TotalLength="21" />
412 body="<TunnellingRequest communication_channel_id="17" sequence_counter="2" cemi="<CEMIFrame SourceAddress="PhysicalAddress("15.15.242")" DestinationAddress="GroupAddress("3/2/1")" Flags="1011110011100000" Command="APCICommand.GROUP_READ" payload="<DPTBinary value="0" />" />" />" />
4132020-10-30 11:14:03 DEBUG (MainThread) [xknx.knx] Sending: <KNXIPFrame <KNXIPHeader HeaderLength="6" ProtocolVersion="16" KNXIPServiceType="KNXIPServiceType.TUNNELLING_ACK" Reserve="0" TotalLength="10" />
414 body="<TunnellingAck communication_channel_id="17" sequence_counter="2" status_code="ErrorCode.E_NO_ERROR" />" />
4152020-10-30 11:14:03 INFO (MainThread) [custom_components.visonic.pyvisonic] [data receiver] *** Received validated message 0X2 ***
4162020-10-30 11:14:03 WARNING (MainThread) [xknx.log] Error: KNX bus did not respond in time (2 secs) to GroupValueRead request for: 3/2/1
4172020-10-30 11:14:03 WARNING (MainThread) [xknx.log] Error: KNX bus did not respond in time (2 secs) to GroupValueRead request for: 1/4/0
4182020-10-30 11:14:03 WARNING (MainThread) [xknx.log] Error: KNX bus did not respond in time (2 secs) to GroupValueRead request for: 1/3/0
4192020-10-30 11:14:03 WARNING (MainThread) [xknx.log] Error: KNX bus did not respond in time (2 secs) to GroupValueRead request for: 1/4/1
4202020-10-30 11:14:03 WARNING (MainThread) [xknx.log] Error: KNX bus did not respond in time (2 secs) to GroupValueRead request for: 1/3/1
4212020-10-30 11:14:03 WARNING (MainThread) [xknx.log] Error: KNX bus did not respond in time (2 secs) to GroupValueRead request for: 5/0/2
4222020-10-30 11:14:03 WARNING (MainThread) [xknx.log] Error: KNX bus did not respond in time (2 secs) to GroupValueRead request for: 5/0/6
4232020-10-30 11:14:03 WARNING (MainThread) [xknx.log] Error: KNX bus did not respond in time (2 secs) to GroupValueRead request for: 5/0/12
4242020-10-30 11:14:03 WARNING (MainThread) [xknx.log] Error: KNX bus did not respond in time (2 secs) to GroupValueRead request for: 5/0/8
4252020-10-30 11:14:03 WARNING (MainThread) [xknx.log] Error: KNX bus did not respond in time (2 secs) to GroupValueRead request for: 5/0/3
4262020-10-30 11:14:03 WARNING (MainThread) [xknx.log] Error: KNX bus did not respond in time (2 secs) to GroupValueRead request for: 5/0/0
4272020-10-30 11:14:03 WARNING (MainThread) [xknx.log] Error: KNX bus did not respond in time (2 secs) to GroupValueRead request for: 5/0/1
4282020-10-30 11:14:03 WARNING (MainThread) [xknx.log] Error: KNX bus did not respond in time (2 secs) to GroupValueRead request for: 5/0/4
4292020-10-30 11:14:03 WARNING (MainThread) [xknx.log] Error: KNX bus did not respond in time (2 secs) to GroupValueRead request for: 5/0/5
4302020-10-30 11:14:03 WARNING (MainThread) [xknx.log] Error: KNX bus did not respond in time (2 secs) to GroupValueRead request for: 5/0/7
4312020-10-30 11:14:03 WARNING (MainThread) [xknx.log] Error: KNX bus did not respond in time (2 secs) to GroupValueRead request for: 5/0/9
4322020-10-30 11:14:03 WARNING (MainThread) [xknx.log] Error: KNX bus did not respond in time (2 secs) to GroupValueRead request for: 5/0/11
4332020-10-30 11:14:03 WARNING (MainThread) [xknx.log] Error: KNX bus did not respond in time (2 secs) to GroupValueRead request for: 5/0/10
4342020-10-30 11:14:03 INFO (MainThread) [homeassistant.components.alarm_control_panel] Setting up alarm_control_panel.visonic
4352020-10-30 11:14:03 WARNING (MainThread) [xknx.log] Could not sync group address '3/2/1' (Slaapkamer M&M Rolgordijn Rechts Open/Dicht - Position)
4362020-10-30 11:14:03 WARNING (MainThread) [xknx.log] Could not sync group address '1/4/0' (Lichtbalk WC Boven - State)
4372020-10-30 11:14:03 WARNING (MainThread) [xknx.log] Could not sync group address '1/3/0' (Lichtbalk WC Boven - Brightness)
4382020-10-30 11:14:03 WARNING (MainThread) [xknx.log] Could not sync group address '1/4/1' (Lichtbalk Badkamer - State)
4392020-10-30 11:14:03 WARNING (MainThread) [xknx.log] Could not sync group address '1/3/1' (Lichtbalk Badkamer - Brightness)
4402020-10-30 11:14:03 WARNING (MainThread) [xknx.log] Could not sync group address '5/0/2' (Slaapkamer Valentijn PIR - State)
4412020-10-30 11:14:03 WARNING (MainThread) [xknx.log] Could not sync group address '5/0/6' (Slaapkamer Friso PIR - State)
4422020-10-30 11:14:03 WARNING (MainThread) [xknx.log] Could not sync group address '5/0/12' (Slaapkamer M&M PIR - State)
4432020-10-30 11:14:03 WARNING (MainThread) [xknx.log] Could not sync group address '5/0/8' (Gang Boven PIR - State)
4442020-10-30 11:14:03 WARNING (MainThread) [xknx.log] Could not sync group address '5/0/3' (WC Boven Radar - State)
4452020-10-30 11:14:03 WARNING (MainThread) [xknx.log] Could not sync group address '5/0/0' (Slaapkamer Valentijn Temperatuur - Value)
4462020-10-30 11:14:03 WARNING (MainThread) [xknx.log] Could not sync group address '5/0/1' (Slaapkamer Valentijn Lux - Value)
4472020-10-30 11:14:03 WARNING (MainThread) [xknx.log] Could not sync group address '5/0/4' (Slaapkamer Friso Temperatuur - Value)
4482020-10-30 11:14:03 WARNING (MainThread) [xknx.log] Could not sync group address '5/0/5' (Slaapkamer Friso Lux - Value)
4492020-10-30 11:14:03 WARNING (MainThread) [xknx.log] Could not sync group address '5/0/7' (Gang Boven Temperatuur - Value)
4502020-10-30 11:14:03 WARNING (MainThread) [xknx.log] Could not sync group address '5/0/9' (Gang Boven Lux - Value)
4512020-10-30 11:14:03 WARNING (MainThread) [xknx.log] Could not sync group address '5/0/11' (Slaapkamer M&M Temperatuur - Value)
4522020-10-30 11:14:03 WARNING (MainThread) [xknx.log] Could not sync group address '5/0/10' (Slaapkamer M&M Lux - Value)
4532020-10-30 11:14:03 DEBUG (MainThread) [xknx.raw_socket] Received from ('10.58.60.11', 3671): 061004200015041102002e00bce0fff21a01010000
4542020-10-30 11:14:03 DEBUG (MainThread) [xknx.knx] Received: <KNXIPFrame <KNXIPHeader HeaderLength="6" ProtocolVersion="16" KNXIPServiceType="KNXIPServiceType.TUNNELLING_REQUEST" Reserve="0" TotalLength="21" />
455 body="<TunnellingRequest communication_channel_id="17" sequence_counter="2" cemi="<CEMIFrame SourceAddress="PhysicalAddress("15.15.242")" DestinationAddress="GroupAddress("3/2/1")" Flags="1011110011100000" Command="APCICommand.GROUP_READ" payload="<DPTBinary value="0" />" />" />" />
4562020-10-30 11:14:03 DEBUG (MainThread) [xknx.knx] Sending: <KNXIPFrame <KNXIPHeader HeaderLength="6" ProtocolVersion="16" KNXIPServiceType="KNXIPServiceType.TUNNELLING_ACK" Reserve="0" TotalLength="10" />
457 body="<TunnellingAck communication_channel_id="17" sequence_counter="2" status_code="ErrorCode.E_NO_ERROR" />" />
4582020-10-30 11:14:03 DEBUG (MainThread) [xknx.raw_socket] Received from ('10.58.60.11', 3671): 061004200016041103002900bce011041a0102004000
4592020-10-30 11:14:03 DEBUG (MainThread) [xknx.knx] Received: <KNXIPFrame <KNXIPHeader HeaderLength="6" ProtocolVersion="16" KNXIPServiceType="KNXIPServiceType.TUNNELLING_REQUEST" Reserve="0" TotalLength="22" />
460 body="<TunnellingRequest communication_channel_id="17" sequence_counter="3" cemi="<CEMIFrame SourceAddress="PhysicalAddress("1.1.4")" DestinationAddress="GroupAddress("3/2/1")" Flags="1011110011100000" Command="APCICommand.GROUP_RESPONSE" payload="<DPTArray value="[0x0]" />" />" />" />
4612020-10-30 11:14:03 DEBUG (MainThread) [xknx.knx] Sending: <KNXIPFrame <KNXIPHeader HeaderLength="6" ProtocolVersion="16" KNXIPServiceType="KNXIPServiceType.TUNNELLING_ACK" Reserve="0" TotalLength="10" />
462 body="<TunnellingAck communication_channel_id="17" sequence_counter="3" status_code="ErrorCode.E_NO_ERROR" />" />
4632020-10-30 11:14:03 INFO (MainThread) [homeassistant.components.notify] Setting up notify.mobile_app
4642020-10-30 11:14:03 DEBUG (MainThread) [xknx.telegram] <Telegram group_address="GroupAddress("3/2/1")", payload="<DPTArray value="[0x0]" />" telegramtype="TelegramType.GROUP_RESPONSE" direction="TelegramDirection.INCOMING" />
4652020-10-30 11:14:03 DEBUG (MainThread) [xknx.telegram] <Telegram group_address="GroupAddress("1/4/0")", payload="None" telegramtype="TelegramType.GROUP_READ" direction="TelegramDirection.OUTGOING" />
4662020-10-30 11:14:03 DEBUG (MainThread) [xknx.knx] Sending: <KNXIPFrame <KNXIPHeader HeaderLength="6" ProtocolVersion="16" KNXIPServiceType="KNXIPServiceType.TUNNELLING_REQUEST" Reserve="0" TotalLength="21" />
467 body="<TunnellingRequest communication_channel_id="17" sequence_counter="2" cemi="<CEMIFrame SourceAddress="PhysicalAddress("15.15.242")" DestinationAddress="GroupAddress("1/4/0")" Flags="1011110011100000" Command="APCICommand.GROUP_READ" payload="None" />" />" />
4682020-10-30 11:14:03 INFO (MainThread) [homeassistant.setup] Setting up default_config
4692020-10-30 11:14:03 INFO (MainThread) [homeassistant.setup] Setup of domain default_config took 0.0 seconds
4702020-10-30 11:14:03 DEBUG (MainThread) [xknx.raw_socket] Received from ('10.58.60.11', 3671): 06100421000a04110200
4712020-10-30 11:14:03 DEBUG (MainThread) [xknx.knx] Received: <KNXIPFrame <KNXIPHeader HeaderLength="6" ProtocolVersion="16" KNXIPServiceType="KNXIPServiceType.TUNNELLING_ACK" Reserve="0" TotalLength="10" />
472 body="<TunnellingAck communication_channel_id="17" sequence_counter="2" status_code="ErrorCode.E_NO_ERROR" />" />
4732020-10-30 11:14:03 DEBUG (MainThread) [xknx.raw_socket] Received from ('10.58.60.11', 3671): 061004200015041104002e00bce0fff20c00010000
4742020-10-30 11:14:03 DEBUG (MainThread) [xknx.knx] Received: <KNXIPFrame <KNXIPHeader HeaderLength="6" ProtocolVersion="16" KNXIPServiceType="KNXIPServiceType.TUNNELLING_REQUEST" Reserve="0" TotalLength="21" />
475 body="<TunnellingRequest communication_channel_id="17" sequence_counter="4" cemi="<CEMIFrame SourceAddress="PhysicalAddress("15.15.242")" DestinationAddress="GroupAddress("1/4/0")" Flags="1011110011100000" Command="APCICommand.GROUP_READ" payload="<DPTBinary value="0" />" />" />" />
4762020-10-30 11:14:03 DEBUG (MainThread) [xknx.knx] Sending: <KNXIPFrame <KNXIPHeader HeaderLength="6" ProtocolVersion="16" KNXIPServiceType="KNXIPServiceType.TUNNELLING_ACK" Reserve="0" TotalLength="10" />
477 body="<TunnellingAck communication_channel_id="17" sequence_counter="4" status_code="ErrorCode.E_NO_ERROR" />" />
4782020-10-30 11:14:03 DEBUG (MainThread) [xknx.telegram] <Telegram group_address="GroupAddress("1/3/0")", payload="None" telegramtype="TelegramType.GROUP_READ" direction="TelegramDirection.OUTGOING" />
4792020-10-30 11:14:03 DEBUG (MainThread) [xknx.knx] Sending: <KNXIPFrame <KNXIPHeader HeaderLength="6" ProtocolVersion="16" KNXIPServiceType="KNXIPServiceType.TUNNELLING_REQUEST" Reserve="0" TotalLength="21" />
480 body="<TunnellingRequest communication_channel_id="17" sequence_counter="3" cemi="<CEMIFrame SourceAddress="PhysicalAddress("15.15.242")" DestinationAddress="GroupAddress("1/3/0")" Flags="1011110011100000" Command="APCICommand.GROUP_READ" payload="None" />" />" />
4812020-10-30 11:14:03 DEBUG (MainThread) [xknx.raw_socket] Received from ('10.58.60.11', 3671): 061004200015041105002900bce011060c00010040
4822020-10-30 11:14:03 DEBUG (MainThread) [xknx.knx] Received: <KNXIPFrame <KNXIPHeader HeaderLength="6" ProtocolVersion="16" KNXIPServiceType="KNXIPServiceType.TUNNELLING_REQUEST" Reserve="0" TotalLength="21" />
483 body="<TunnellingRequest communication_channel_id="17" sequence_counter="5" cemi="<CEMIFrame SourceAddress="PhysicalAddress("1.1.6")" DestinationAddress="GroupAddress("1/4/0")" Flags="1011110011100000" Command="APCICommand.GROUP_RESPONSE" payload="<DPTBinary value="0" />" />" />" />
4842020-10-30 11:14:03 DEBUG (MainThread) [xknx.knx] Sending: <KNXIPFrame <KNXIPHeader HeaderLength="6" ProtocolVersion="16" KNXIPServiceType="KNXIPServiceType.TUNNELLING_ACK" Reserve="0" TotalLength="10" />
485 body="<TunnellingAck communication_channel_id="17" sequence_counter="5" status_code="ErrorCode.E_NO_ERROR" />" />
4862020-10-30 11:14:03 DEBUG (MainThread) [xknx.telegram] <Telegram group_address="GroupAddress("1/4/0")", payload="<DPTBinary value="0" />" telegramtype="TelegramType.GROUP_RESPONSE" direction="TelegramDirection.INCOMING" />
4872020-10-30 11:14:03 DEBUG (MainThread) [xknx.raw_socket] Received from ('10.58.60.11', 3671): 06100421000a04110300
4882020-10-30 11:14:03 DEBUG (MainThread) [xknx.knx] Received: <KNXIPFrame <KNXIPHeader HeaderLength="6" ProtocolVersion="16" KNXIPServiceType="KNXIPServiceType.TUNNELLING_ACK" Reserve="0" TotalLength="10" />
489 body="<TunnellingAck communication_channel_id="17" sequence_counter="3" status_code="ErrorCode.E_NO_ERROR" />" />
4902020-10-30 11:14:03 DEBUG (MainThread) [xknx.raw_socket] Received from ('10.58.60.11', 3671): 061004200015041106002e00bce0fff20b00010000
4912020-10-30 11:14:03 DEBUG (MainThread) [xknx.knx] Received: <KNXIPFrame <KNXIPHeader HeaderLength="6" ProtocolVersion="16" KNXIPServiceType="KNXIPServiceType.TUNNELLING_REQUEST" Reserve="0" TotalLength="21" />
492 body="<TunnellingRequest communication_channel_id="17" sequence_counter="6" cemi="<CEMIFrame SourceAddress="PhysicalAddress("15.15.242")" DestinationAddress="GroupAddress("1/3/0")" Flags="1011110011100000" Command="APCICommand.GROUP_READ" payload="<DPTBinary value="0" />" />" />" />
4932020-10-30 11:14:03 DEBUG (MainThread) [xknx.knx] Sending: <KNXIPFrame <KNXIPHeader HeaderLength="6" ProtocolVersion="16" KNXIPServiceType="KNXIPServiceType.TUNNELLING_ACK" Reserve="0" TotalLength="10" />
494 body="<TunnellingAck communication_channel_id="17" sequence_counter="6" status_code="ErrorCode.E_NO_ERROR" />" />
4952020-10-30 11:14:03 DEBUG (MainThread) [xknx.telegram] <Telegram group_address="GroupAddress("1/4/1")", payload="None" telegramtype="TelegramType.GROUP_READ" direction="TelegramDirection.OUTGOING" />
4962020-10-30 11:14:03 DEBUG (MainThread) [xknx.knx] Sending: <KNXIPFrame <KNXIPHeader HeaderLength="6" ProtocolVersion="16" KNXIPServiceType="KNXIPServiceType.TUNNELLING_REQUEST" Reserve="0" TotalLength="21" />
497 body="<TunnellingRequest communication_channel_id="17" sequence_counter="4" cemi="<CEMIFrame SourceAddress="PhysicalAddress("15.15.242")" DestinationAddress="GroupAddress("1/4/1")" Flags="1011110011100000" Command="APCICommand.GROUP_READ" payload="None" />" />" />
4982020-10-30 11:14:03 DEBUG (MainThread) [xknx.raw_socket] Received from ('10.58.60.11', 3671): 06100421000a04110400
4992020-10-30 11:14:03 DEBUG (MainThread) [xknx.knx] Received: <KNXIPFrame <KNXIPHeader HeaderLength="6" ProtocolVersion="16" KNXIPServiceType="KNXIPServiceType.TUNNELLING_ACK" Reserve="0" TotalLength="10" />
500 body="<TunnellingAck communication_channel_id="17" sequence_counter="4" status_code="ErrorCode.E_NO_ERROR" />" />
5012020-10-30 11:14:03 DEBUG (MainThread) [xknx.raw_socket] Received from ('10.58.60.11', 3671): 061004200015041107002e00bce0fff20c01010000
5022020-10-30 11:14:03 DEBUG (MainThread) [xknx.knx] Received: <KNXIPFrame <KNXIPHeader HeaderLength="6" ProtocolVersion="16" KNXIPServiceType="KNXIPServiceType.TUNNELLING_REQUEST" Reserve="0" TotalLength="21" />
503 body="<TunnellingRequest communication_channel_id="17" sequence_counter="7" cemi="<CEMIFrame SourceAddress="PhysicalAddress("15.15.242")" DestinationAddress="GroupAddress("1/4/1")" Flags="1011110011100000" Command="APCICommand.GROUP_READ" payload="<DPTBinary value="0" />" />" />" />
5042020-10-30 11:14:03 DEBUG (MainThread) [xknx.knx] Sending: <KNXIPFrame <KNXIPHeader HeaderLength="6" ProtocolVersion="16" KNXIPServiceType="KNXIPServiceType.TUNNELLING_ACK" Reserve="0" TotalLength="10" />
505 body="<TunnellingAck communication_channel_id="17" sequence_counter="7" status_code="ErrorCode.E_NO_ERROR" />" />
5062020-10-30 11:14:03 INFO (MainThread) [custom_components.hacs] Setup task HacsSetupTask.HACS_REPO
5072020-10-30 11:14:04 DEBUG (MainThread) [xknx.raw_socket] Received from ('10.58.60.11', 3671): 061004200016041108002900bce011060b0002004000
5082020-10-30 11:14:04 DEBUG (MainThread) [xknx.knx] Received: <KNXIPFrame <KNXIPHeader HeaderLength="6" ProtocolVersion="16" KNXIPServiceType="KNXIPServiceType.TUNNELLING_REQUEST" Reserve="0" TotalLength="22" />
509 body="<TunnellingRequest communication_channel_id="17" sequence_counter="8" cemi="<CEMIFrame SourceAddress="PhysicalAddress("1.1.6")" DestinationAddress="GroupAddress("1/3/0")" Flags="1011110011100000" Command="APCICommand.GROUP_RESPONSE" payload="<DPTArray value="[0x0]" />" />" />" />
5102020-10-30 11:14:04 DEBUG (MainThread) [xknx.knx] Sending: <KNXIPFrame <KNXIPHeader HeaderLength="6" ProtocolVersion="16" KNXIPServiceType="KNXIPServiceType.TUNNELLING_ACK" Reserve="0" TotalLength="10" />
511 body="<TunnellingAck communication_channel_id="17" sequence_counter="8" status_code="ErrorCode.E_NO_ERROR" />" />
5122020-10-30 11:14:04 DEBUG (MainThread) [xknx.telegram] <Telegram group_address="GroupAddress("1/3/0")", payload="<DPTArray value="[0x0]" />" telegramtype="TelegramType.GROUP_RESPONSE" direction="TelegramDirection.INCOMING" />
5132020-10-30 11:14:04 DEBUG (MainThread) [xknx.telegram] <Telegram group_address="GroupAddress("1/3/1")", payload="None" telegramtype="TelegramType.GROUP_READ" direction="TelegramDirection.OUTGOING" />
5142020-10-30 11:14:04 DEBUG (MainThread) [xknx.knx] Sending: <KNXIPFrame <KNXIPHeader HeaderLength="6" ProtocolVersion="16" KNXIPServiceType="KNXIPServiceType.TUNNELLING_REQUEST" Reserve="0" TotalLength="21" />
515 body="<TunnellingRequest communication_channel_id="17" sequence_counter="5" cemi="<CEMIFrame SourceAddress="PhysicalAddress("15.15.242")" DestinationAddress="GroupAddress("1/3/1")" Flags="1011110011100000" Command="APCICommand.GROUP_READ" payload="None" />" />" />
5162020-10-30 11:14:04 DEBUG (MainThread) [xknx.raw_socket] Received from ('10.58.60.11', 3671): 061004200015041109002900bce011060c01010040
5172020-10-30 11:14:04 DEBUG (MainThread) [xknx.knx] Received: <KNXIPFrame <KNXIPHeader HeaderLength="6" ProtocolVersion="16" KNXIPServiceType="KNXIPServiceType.TUNNELLING_REQUEST" Reserve="0" TotalLength="21" />
518 body="<TunnellingRequest communication_channel_id="17" sequence_counter="9" cemi="<CEMIFrame SourceAddress="PhysicalAddress("1.1.6")" DestinationAddress="GroupAddress("1/4/1")" Flags="1011110011100000" Command="APCICommand.GROUP_RESPONSE" payload="<DPTBinary value="0" />" />" />" />
5192020-10-30 11:14:04 DEBUG (MainThread) [xknx.knx] Sending: <KNXIPFrame <KNXIPHeader HeaderLength="6" ProtocolVersion="16" KNXIPServiceType="KNXIPServiceType.TUNNELLING_ACK" Reserve="0" TotalLength="10" />
520 body="<TunnellingAck communication_channel_id="17" sequence_counter="9" status_code="ErrorCode.E_NO_ERROR" />" />
5212020-10-30 11:14:04 DEBUG (MainThread) [xknx.telegram] <Telegram group_address="GroupAddress("1/4/1")", payload="<DPTBinary value="0" />" telegramtype="TelegramType.GROUP_RESPONSE" direction="TelegramDirection.INCOMING" />
5222020-10-30 11:14:04 DEBUG (MainThread) [xknx.raw_socket] Received from ('10.58.60.11', 3671): 06100421000a04110500
5232020-10-30 11:14:04 DEBUG (MainThread) [xknx.knx] Received: <KNXIPFrame <KNXIPHeader HeaderLength="6" ProtocolVersion="16" KNXIPServiceType="KNXIPServiceType.TUNNELLING_ACK" Reserve="0" TotalLength="10" />
524 body="<TunnellingAck communication_channel_id="17" sequence_counter="5" status_code="ErrorCode.E_NO_ERROR" />" />
5252020-10-30 11:14:04 DEBUG (MainThread) [xknx.raw_socket] Received from ('10.58.60.11', 3671): 06100420001504110a002e00bce0fff20b01010000
5262020-10-30 11:14:04 DEBUG (MainThread) [xknx.knx] Received: <KNXIPFrame <KNXIPHeader HeaderLength="6" ProtocolVersion="16" KNXIPServiceType="KNXIPServiceType.TUNNELLING_REQUEST" Reserve="0" TotalLength="21" />
527 body="<TunnellingRequest communication_channel_id="17" sequence_counter="10" cemi="<CEMIFrame SourceAddress="PhysicalAddress("15.15.242")" DestinationAddress="GroupAddress("1/3/1")" Flags="1011110011100000" Command="APCICommand.GROUP_READ" payload="<DPTBinary value="0" />" />" />" />
5282020-10-30 11:14:04 DEBUG (MainThread) [xknx.knx] Sending: <KNXIPFrame <KNXIPHeader HeaderLength="6" ProtocolVersion="16" KNXIPServiceType="KNXIPServiceType.TUNNELLING_ACK" Reserve="0" TotalLength="10" />
529 body="<TunnellingAck communication_channel_id="17" sequence_counter="10" status_code="ErrorCode.E_NO_ERROR" />" />
5302020-10-30 11:14:04 DEBUG (MainThread) [xknx.telegram] <Telegram group_address="GroupAddress("5/0/2")", payload="None" telegramtype="TelegramType.GROUP_READ" direction="TelegramDirection.OUTGOING" />
5312020-10-30 11:14:04 DEBUG (MainThread) [xknx.knx] Sending: <KNXIPFrame <KNXIPHeader HeaderLength="6" ProtocolVersion="16" KNXIPServiceType="KNXIPServiceType.TUNNELLING_REQUEST" Reserve="0" TotalLength="21" />
532 body="<TunnellingRequest communication_channel_id="17" sequence_counter="6" cemi="<CEMIFrame SourceAddress="PhysicalAddress("15.15.242")" DestinationAddress="GroupAddress("5/0/2")" Flags="1011110011100000" Command="APCICommand.GROUP_READ" payload="None" />" />" />
5332020-10-30 11:14:04 DEBUG (MainThread) [xknx.raw_socket] Received from ('10.58.60.11', 3671): 06100421000a04110600
5342020-10-30 11:14:04 DEBUG (MainThread) [xknx.knx] Received: <KNXIPFrame <KNXIPHeader HeaderLength="6" ProtocolVersion="16" KNXIPServiceType="KNXIPServiceType.TUNNELLING_ACK" Reserve="0" TotalLength="10" />
535 body="<TunnellingAck communication_channel_id="17" sequence_counter="6" status_code="ErrorCode.E_NO_ERROR" />" />
5362020-10-30 11:14:04 DEBUG (MainThread) [xknx.raw_socket] Received from ('10.58.60.11', 3671): 06100420001504110b002e00bce0fff22802010000
5372020-10-30 11:14:04 DEBUG (MainThread) [xknx.knx] Received: <KNXIPFrame <KNXIPHeader HeaderLength="6" ProtocolVersion="16" KNXIPServiceType="KNXIPServiceType.TUNNELLING_REQUEST" Reserve="0" TotalLength="21" />
538 body="<TunnellingRequest communication_channel_id="17" sequence_counter="11" cemi="<CEMIFrame SourceAddress="PhysicalAddress("15.15.242")" DestinationAddress="GroupAddress("5/0/2")" Flags="1011110011100000" Command="APCICommand.GROUP_READ" payload="<DPTBinary value="0" />" />" />" />
5392020-10-30 11:14:04 DEBUG (MainThread) [xknx.knx] Sending: <KNXIPFrame <KNXIPHeader HeaderLength="6" ProtocolVersion="16" KNXIPServiceType="KNXIPServiceType.TUNNELLING_ACK" Reserve="0" TotalLength="10" />
540 body="<TunnellingAck communication_channel_id="17" sequence_counter="11" status_code="ErrorCode.E_NO_ERROR" />" />
5412020-10-30 11:14:04 DEBUG (MainThread) [xknx.raw_socket] Received from ('10.58.60.11', 3671): 06100420001504110c002900bce011032802010040
5422020-10-30 11:14:04 DEBUG (MainThread) [xknx.knx] Received: <KNXIPFrame <KNXIPHeader HeaderLength="6" ProtocolVersion="16" KNXIPServiceType="KNXIPServiceType.TUNNELLING_REQUEST" Reserve="0" TotalLength="21" />
543 body="<TunnellingRequest communication_channel_id="17" sequence_counter="12" cemi="<CEMIFrame SourceAddress="PhysicalAddress("1.1.3")" DestinationAddress="GroupAddress("5/0/2")" Flags="1011110011100000" Command="APCICommand.GROUP_RESPONSE" payload="<DPTBinary value="0" />" />" />" />
5442020-10-30 11:14:04 DEBUG (MainThread) [xknx.knx] Sending: <KNXIPFrame <KNXIPHeader HeaderLength="6" ProtocolVersion="16" KNXIPServiceType="KNXIPServiceType.TUNNELLING_ACK" Reserve="0" TotalLength="10" />
545 body="<TunnellingAck communication_channel_id="17" sequence_counter="12" status_code="ErrorCode.E_NO_ERROR" />" />
5462020-10-30 11:14:04 DEBUG (MainThread) [xknx.telegram] <Telegram group_address="GroupAddress("5/0/2")", payload="<DPTBinary value="0" />" telegramtype="TelegramType.GROUP_RESPONSE" direction="TelegramDirection.INCOMING" />
5472020-10-30 11:14:04 DEBUG (MainThread) [xknx.telegram] <Telegram group_address="GroupAddress("5/0/6")", payload="None" telegramtype="TelegramType.GROUP_READ" direction="TelegramDirection.OUTGOING" />
5482020-10-30 11:14:04 DEBUG (MainThread) [xknx.knx] Sending: <KNXIPFrame <KNXIPHeader HeaderLength="6" ProtocolVersion="16" KNXIPServiceType="KNXIPServiceType.TUNNELLING_REQUEST" Reserve="0" TotalLength="21" />
549 body="<TunnellingRequest communication_channel_id="17" sequence_counter="7" cemi="<CEMIFrame SourceAddress="PhysicalAddress("15.15.242")" DestinationAddress="GroupAddress("5/0/6")" Flags="1011110011100000" Command="APCICommand.GROUP_READ" payload="None" />" />" />
5502020-10-30 11:14:04 DEBUG (MainThread) [xknx.raw_socket] Received from ('10.58.60.11', 3671): 06100421000a04110700
5512020-10-30 11:14:04 DEBUG (MainThread) [xknx.knx] Received: <KNXIPFrame <KNXIPHeader HeaderLength="6" ProtocolVersion="16" KNXIPServiceType="KNXIPServiceType.TUNNELLING_ACK" Reserve="0" TotalLength="10" />
552 body="<TunnellingAck communication_channel_id="17" sequence_counter="7" status_code="ErrorCode.E_NO_ERROR" />" />
5532020-10-30 11:14:04 DEBUG (MainThread) [xknx.raw_socket] Received from ('10.58.60.11', 3671): 06100420001504110d002e00bce0fff22806010000
5542020-10-30 11:14:04 DEBUG (MainThread) [xknx.knx] Received: <KNXIPFrame <KNXIPHeader HeaderLength="6" ProtocolVersion="16" KNXIPServiceType="KNXIPServiceType.TUNNELLING_REQUEST" Reserve="0" TotalLength="21" />
555 body="<TunnellingRequest communication_channel_id="17" sequence_counter="13" cemi="<CEMIFrame SourceAddress="PhysicalAddress("15.15.242")" DestinationAddress="GroupAddress("5/0/6")" Flags="1011110011100000" Command="APCICommand.GROUP_READ" payload="<DPTBinary value="0" />" />" />" />
5562020-10-30 11:14:04 DEBUG (MainThread) [xknx.knx] Sending: <KNXIPFrame <KNXIPHeader HeaderLength="6" ProtocolVersion="16" KNXIPServiceType="KNXIPServiceType.TUNNELLING_ACK" Reserve="0" TotalLength="10" />
557 body="<TunnellingAck communication_channel_id="17" sequence_counter="13" status_code="ErrorCode.E_NO_ERROR" />" />
5582020-10-30 11:14:04 DEBUG (MainThread) [xknx.raw_socket] Received from ('10.58.60.11', 3671): 06100420001604110e002900bce011060b0102004000
5592020-10-30 11:14:04 DEBUG (MainThread) [xknx.knx] Received: <KNXIPFrame <KNXIPHeader HeaderLength="6" ProtocolVersion="16" KNXIPServiceType="KNXIPServiceType.TUNNELLING_REQUEST" Reserve="0" TotalLength="22" />
560 body="<TunnellingRequest communication_channel_id="17" sequence_counter="14" cemi="<CEMIFrame SourceAddress="PhysicalAddress("1.1.6")" DestinationAddress="GroupAddress("1/3/1")" Flags="1011110011100000" Command="APCICommand.GROUP_RESPONSE" payload="<DPTArray value="[0x0]" />" />" />" />
5612020-10-30 11:14:04 DEBUG (MainThread) [xknx.knx] Sending: <KNXIPFrame <KNXIPHeader HeaderLength="6" ProtocolVersion="16" KNXIPServiceType="KNXIPServiceType.TUNNELLING_ACK" Reserve="0" TotalLength="10" />
562 body="<TunnellingAck communication_channel_id="17" sequence_counter="14" status_code="ErrorCode.E_NO_ERROR" />" />
5632020-10-30 11:14:04 DEBUG (MainThread) [xknx.telegram] <Telegram group_address="GroupAddress("1/3/1")", payload="<DPTArray value="[0x0]" />" telegramtype="TelegramType.GROUP_RESPONSE" direction="TelegramDirection.INCOMING" />
5642020-10-30 11:14:04 DEBUG (MainThread) [xknx.raw_socket] Received from ('10.58.60.11', 3671): 06100420001504110f002900bce011072806010040
5652020-10-30 11:14:04 DEBUG (MainThread) [xknx.knx] Received: <KNXIPFrame <KNXIPHeader HeaderLength="6" ProtocolVersion="16" KNXIPServiceType="KNXIPServiceType.TUNNELLING_REQUEST" Reserve="0" TotalLength="21" />
566 body="<TunnellingRequest communication_channel_id="17" sequence_counter="15" cemi="<CEMIFrame SourceAddress="PhysicalAddress("1.1.7")" DestinationAddress="GroupAddress("5/0/6")" Flags="1011110011100000" Command="APCICommand.GROUP_RESPONSE" payload="<DPTBinary value="0" />" />" />" />
5672020-10-30 11:14:04 DEBUG (MainThread) [xknx.knx] Sending: <KNXIPFrame <KNXIPHeader HeaderLength="6" ProtocolVersion="16" KNXIPServiceType="KNXIPServiceType.TUNNELLING_ACK" Reserve="0" TotalLength="10" />
568 body="<TunnellingAck communication_channel_id="17" sequence_counter="15" status_code="ErrorCode.E_NO_ERROR" />" />
5692020-10-30 11:14:04 DEBUG (MainThread) [xknx.telegram] <Telegram group_address="GroupAddress("5/0/6")", payload="<DPTBinary value="0" />" telegramtype="TelegramType.GROUP_RESPONSE" direction="TelegramDirection.INCOMING" />
5702020-10-30 11:14:04 DEBUG (MainThread) [xknx.telegram] <Telegram group_address="GroupAddress("5/0/12")", payload="None" telegramtype="TelegramType.GROUP_READ" direction="TelegramDirection.OUTGOING" />
5712020-10-30 11:14:04 DEBUG (MainThread) [xknx.knx] Sending: <KNXIPFrame <KNXIPHeader HeaderLength="6" ProtocolVersion="16" KNXIPServiceType="KNXIPServiceType.TUNNELLING_REQUEST" Reserve="0" TotalLength="21" />
572 body="<TunnellingRequest communication_channel_id="17" sequence_counter="8" cemi="<CEMIFrame SourceAddress="PhysicalAddress("15.15.242")" DestinationAddress="GroupAddress("5/0/12")" Flags="1011110011100000" Command="APCICommand.GROUP_READ" payload="None" />" />" />
5732020-10-30 11:14:04 DEBUG (MainThread) [xknx.raw_socket] Received from ('10.58.60.11', 3671): 06100421000a04110800
5742020-10-30 11:14:04 DEBUG (MainThread) [xknx.knx] Received: <KNXIPFrame <KNXIPHeader HeaderLength="6" ProtocolVersion="16" KNXIPServiceType="KNXIPServiceType.TUNNELLING_ACK" Reserve="0" TotalLength="10" />
575 body="<TunnellingAck communication_channel_id="17" sequence_counter="8" status_code="ErrorCode.E_NO_ERROR" />" />
5762020-10-30 11:14:04 DEBUG (MainThread) [xknx.raw_socket] Received from ('10.58.60.11', 3671): 061004200015041110002e00bce0fff2280c010000
5772020-10-30 11:14:04 DEBUG (MainThread) [xknx.knx] Received: <KNXIPFrame <KNXIPHeader HeaderLength="6" ProtocolVersion="16" KNXIPServiceType="KNXIPServiceType.TUNNELLING_REQUEST" Reserve="0" TotalLength="21" />
578 body="<TunnellingRequest communication_channel_id="17" sequence_counter="16" cemi="<CEMIFrame SourceAddress="PhysicalAddress("15.15.242")" DestinationAddress="GroupAddress("5/0/12")" Flags="1011110011100000" Command="APCICommand.GROUP_READ" payload="<DPTBinary value="0" />" />" />" />
5792020-10-30 11:14:04 DEBUG (MainThread) [xknx.knx] Sending: <KNXIPFrame <KNXIPHeader HeaderLength="6" ProtocolVersion="16" KNXIPServiceType="KNXIPServiceType.TUNNELLING_ACK" Reserve="0" TotalLength="10" />
580 body="<TunnellingAck communication_channel_id="17" sequence_counter="16" status_code="ErrorCode.E_NO_ERROR" />" />
5812020-10-30 11:14:04 DEBUG (MainThread) [xknx.raw_socket] Received from ('10.58.60.11', 3671): 061004200015041111002900bce01109280c010040
5822020-10-30 11:14:04 DEBUG (MainThread) [xknx.knx] Received: <KNXIPFrame <KNXIPHeader HeaderLength="6" ProtocolVersion="16" KNXIPServiceType="KNXIPServiceType.TUNNELLING_REQUEST" Reserve="0" TotalLength="21" />
583 body="<TunnellingRequest communication_channel_id="17" sequence_counter="17" cemi="<CEMIFrame SourceAddress="PhysicalAddress("1.1.9")" DestinationAddress="GroupAddress("5/0/12")" Flags="1011110011100000" Command="APCICommand.GROUP_RESPONSE" payload="<DPTBinary value="0" />" />" />" />
5842020-10-30 11:14:04 DEBUG (MainThread) [xknx.knx] Sending: <KNXIPFrame <KNXIPHeader HeaderLength="6" ProtocolVersion="16" KNXIPServiceType="KNXIPServiceType.TUNNELLING_ACK" Reserve="0" TotalLength="10" />
585 body="<TunnellingAck communication_channel_id="17" sequence_counter="17" status_code="ErrorCode.E_NO_ERROR" />" />
5862020-10-30 11:14:04 DEBUG (MainThread) [xknx.telegram] <Telegram group_address="GroupAddress("5/0/12")", payload="<DPTBinary value="0" />" telegramtype="TelegramType.GROUP_RESPONSE" direction="TelegramDirection.INCOMING" />
5872020-10-30 11:14:04 DEBUG (MainThread) [xknx.telegram] <Telegram group_address="GroupAddress("5/0/8")", payload="None" telegramtype="TelegramType.GROUP_READ" direction="TelegramDirection.OUTGOING" />
5882020-10-30 11:14:04 DEBUG (MainThread) [xknx.knx] Sending: <KNXIPFrame <KNXIPHeader HeaderLength="6" ProtocolVersion="16" KNXIPServiceType="KNXIPServiceType.TUNNELLING_REQUEST" Reserve="0" TotalLength="21" />
589 body="<TunnellingRequest communication_channel_id="17" sequence_counter="9" cemi="<CEMIFrame SourceAddress="PhysicalAddress("15.15.242")" DestinationAddress="GroupAddress("5/0/8")" Flags="1011110011100000" Command="APCICommand.GROUP_READ" payload="None" />" />" />
5902020-10-30 11:14:04 DEBUG (MainThread) [xknx.raw_socket] Received from ('10.58.60.11', 3671): 06100421000a04110900
5912020-10-30 11:14:04 DEBUG (MainThread) [xknx.knx] Received: <KNXIPFrame <KNXIPHeader HeaderLength="6" ProtocolVersion="16" KNXIPServiceType="KNXIPServiceType.TUNNELLING_ACK" Reserve="0" TotalLength="10" />
592 body="<TunnellingAck communication_channel_id="17" sequence_counter="9" status_code="ErrorCode.E_NO_ERROR" />" />
5932020-10-30 11:14:04 DEBUG (MainThread) [xknx.raw_socket] Received from ('10.58.60.11', 3671): 061004200015041112002e00bce0fff22808010000
5942020-10-30 11:14:04 DEBUG (MainThread) [xknx.knx] Received: <KNXIPFrame <KNXIPHeader HeaderLength="6" ProtocolVersion="16" KNXIPServiceType="KNXIPServiceType.TUNNELLING_REQUEST" Reserve="0" TotalLength="21" />
595 body="<TunnellingRequest communication_channel_id="17" sequence_counter="18" cemi="<CEMIFrame SourceAddress="PhysicalAddress("15.15.242")" DestinationAddress="GroupAddress("5/0/8")" Flags="1011110011100000" Command="APCICommand.GROUP_READ" payload="<DPTBinary value="0" />" />" />" />
5962020-10-30 11:14:04 DEBUG (MainThread) [xknx.knx] Sending: <KNXIPFrame <KNXIPHeader HeaderLength="6" ProtocolVersion="16" KNXIPServiceType="KNXIPServiceType.TUNNELLING_ACK" Reserve="0" TotalLength="10" />
597 body="<TunnellingAck communication_channel_id="17" sequence_counter="18" status_code="ErrorCode.E_NO_ERROR" />" />
5982020-10-30 11:14:04 DEBUG (MainThread) [xknx.raw_socket] Received from ('10.58.60.11', 3671): 061004200015041113002900bce011082808010040
5992020-10-30 11:14:04 DEBUG (MainThread) [xknx.knx] Received: <KNXIPFrame <KNXIPHeader HeaderLength="6" ProtocolVersion="16" KNXIPServiceType="KNXIPServiceType.TUNNELLING_REQUEST" Reserve="0" TotalLength="21" />
600 body="<TunnellingRequest communication_channel_id="17" sequence_counter="19" cemi="<CEMIFrame SourceAddress="PhysicalAddress("1.1.8")" DestinationAddress="GroupAddress("5/0/8")" Flags="1011110011100000" Command="APCICommand.GROUP_RESPONSE" payload="<DPTBinary value="0" />" />" />" />
6012020-10-30 11:14:04 DEBUG (MainThread) [xknx.knx] Sending: <KNXIPFrame <KNXIPHeader HeaderLength="6" ProtocolVersion="16" KNXIPServiceType="KNXIPServiceType.TUNNELLING_ACK" Reserve="0" TotalLength="10" />
602 body="<TunnellingAck communication_channel_id="17" sequence_counter="19" status_code="ErrorCode.E_NO_ERROR" />" />
6032020-10-30 11:14:04 DEBUG (MainThread) [xknx.telegram] <Telegram group_address="GroupAddress("5/0/8")", payload="<DPTBinary value="0" />" telegramtype="TelegramType.GROUP_RESPONSE" direction="TelegramDirection.INCOMING" />
6042020-10-30 11:14:04 DEBUG (MainThread) [xknx.telegram] <Telegram group_address="GroupAddress("5/0/3")", payload="None" telegramtype="TelegramType.GROUP_READ" direction="TelegramDirection.OUTGOING" />
6052020-10-30 11:14:04 DEBUG (MainThread) [xknx.knx] Sending: <KNXIPFrame <KNXIPHeader HeaderLength="6" ProtocolVersion="16" KNXIPServiceType="KNXIPServiceType.TUNNELLING_REQUEST" Reserve="0" TotalLength="21" />
606 body="<TunnellingRequest communication_channel_id="17" sequence_counter="10" cemi="<CEMIFrame SourceAddress="PhysicalAddress("15.15.242")" DestinationAddress="GroupAddress("5/0/3")" Flags="1011110011100000" Command="APCICommand.GROUP_READ" payload="None" />" />" />
6072020-10-30 11:14:04 DEBUG (MainThread) [xknx.raw_socket] Received from ('10.58.60.11', 3671): 06100421000a04110a00
6082020-10-30 11:14:04 DEBUG (MainThread) [xknx.knx] Received: <KNXIPFrame <KNXIPHeader HeaderLength="6" ProtocolVersion="16" KNXIPServiceType="KNXIPServiceType.TUNNELLING_ACK" Reserve="0" TotalLength="10" />
609 body="<TunnellingAck communication_channel_id="17" sequence_counter="10" status_code="ErrorCode.E_NO_ERROR" />" />
6102020-10-30 11:14:04 DEBUG (MainThread) [xknx.raw_socket] Received from ('10.58.60.11', 3671): 061004200015041114002e00bce0fff22803010000
6112020-10-30 11:14:04 DEBUG (MainThread) [xknx.knx] Received: <KNXIPFrame <KNXIPHeader HeaderLength="6" ProtocolVersion="16" KNXIPServiceType="KNXIPServiceType.TUNNELLING_REQUEST" Reserve="0" TotalLength="21" />
612 body="<TunnellingRequest communication_channel_id="17" sequence_counter="20" cemi="<CEMIFrame SourceAddress="PhysicalAddress("15.15.242")" DestinationAddress="GroupAddress("5/0/3")" Flags="1011110011100000" Command="APCICommand.GROUP_READ" payload="<DPTBinary value="0" />" />" />" />
6132020-10-30 11:14:04 DEBUG (MainThread) [xknx.knx] Sending: <KNXIPFrame <KNXIPHeader HeaderLength="6" ProtocolVersion="16" KNXIPServiceType="KNXIPServiceType.TUNNELLING_ACK" Reserve="0" TotalLength="10" />
614 body="<TunnellingAck communication_channel_id="17" sequence_counter="20" status_code="ErrorCode.E_NO_ERROR" />" />
6152020-10-30 11:14:04 DEBUG (MainThread) [xknx.telegram] <Telegram group_address="GroupAddress("5/0/0")", payload="None" telegramtype="TelegramType.GROUP_READ" direction="TelegramDirection.OUTGOING" />
6162020-10-30 11:14:04 DEBUG (MainThread) [xknx.knx] Sending: <KNXIPFrame <KNXIPHeader HeaderLength="6" ProtocolVersion="16" KNXIPServiceType="KNXIPServiceType.TUNNELLING_REQUEST" Reserve="0" TotalLength="21" />
617 body="<TunnellingRequest communication_channel_id="17" sequence_counter="11" cemi="<CEMIFrame SourceAddress="PhysicalAddress("15.15.242")" DestinationAddress="GroupAddress("5/0/0")" Flags="1011110011100000" Command="APCICommand.GROUP_READ" payload="None" />" />" />
6182020-10-30 11:14:04 DEBUG (MainThread) [xknx.raw_socket] Received from ('10.58.60.11', 3671): 06100421000a04110b00
6192020-10-30 11:14:04 DEBUG (MainThread) [xknx.knx] Received: <KNXIPFrame <KNXIPHeader HeaderLength="6" ProtocolVersion="16" KNXIPServiceType="KNXIPServiceType.TUNNELLING_ACK" Reserve="0" TotalLength="10" />
620 body="<TunnellingAck communication_channel_id="17" sequence_counter="11" status_code="ErrorCode.E_NO_ERROR" />" />
6212020-10-30 11:14:04 DEBUG (MainThread) [xknx.raw_socket] Received from ('10.58.60.11', 3671): 061004200015041115002900bce011052803010040
6222020-10-30 11:14:04 DEBUG (MainThread) [xknx.knx] Received: <KNXIPFrame <KNXIPHeader HeaderLength="6" ProtocolVersion="16" KNXIPServiceType="KNXIPServiceType.TUNNELLING_REQUEST" Reserve="0" TotalLength="21" />
623 body="<TunnellingRequest communication_channel_id="17" sequence_counter="21" cemi="<CEMIFrame SourceAddress="PhysicalAddress("1.1.5")" DestinationAddress="GroupAddress("5/0/3")" Flags="1011110011100000" Command="APCICommand.GROUP_RESPONSE" payload="<DPTBinary value="0" />" />" />" />
6242020-10-30 11:14:04 DEBUG (MainThread) [xknx.knx] Sending: <KNXIPFrame <KNXIPHeader HeaderLength="6" ProtocolVersion="16" KNXIPServiceType="KNXIPServiceType.TUNNELLING_ACK" Reserve="0" TotalLength="10" />
625 body="<TunnellingAck communication_channel_id="17" sequence_counter="21" status_code="ErrorCode.E_NO_ERROR" />" />
6262020-10-30 11:14:04 DEBUG (MainThread) [xknx.telegram] <Telegram group_address="GroupAddress("5/0/3")", payload="<DPTBinary value="0" />" telegramtype="TelegramType.GROUP_RESPONSE" direction="TelegramDirection.INCOMING" />
6272020-10-30 11:14:04 DEBUG (MainThread) [xknx.raw_socket] Received from ('10.58.60.11', 3671): 061004200015041116002e00bce0fff22800010000
6282020-10-30 11:14:04 DEBUG (MainThread) [xknx.knx] Received: <KNXIPFrame <KNXIPHeader HeaderLength="6" ProtocolVersion="16" KNXIPServiceType="KNXIPServiceType.TUNNELLING_REQUEST" Reserve="0" TotalLength="21" />
629 body="<TunnellingRequest communication_channel_id="17" sequence_counter="22" cemi="<CEMIFrame SourceAddress="PhysicalAddress("15.15.242")" DestinationAddress="GroupAddress("5/0/0")" Flags="1011110011100000" Command="APCICommand.GROUP_READ" payload="<DPTBinary value="0" />" />" />" />
6302020-10-30 11:14:04 DEBUG (MainThread) [xknx.knx] Sending: <KNXIPFrame <KNXIPHeader HeaderLength="6" ProtocolVersion="16" KNXIPServiceType="KNXIPServiceType.TUNNELLING_ACK" Reserve="0" TotalLength="10" />
631 body="<TunnellingAck communication_channel_id="17" sequence_counter="22" status_code="ErrorCode.E_NO_ERROR" />" />
6322020-10-30 11:14:04 DEBUG (MainThread) [xknx.telegram] <Telegram group_address="GroupAddress("5/0/1")", payload="None" telegramtype="TelegramType.GROUP_READ" direction="TelegramDirection.OUTGOING" />
6332020-10-30 11:14:04 DEBUG (MainThread) [xknx.knx] Sending: <KNXIPFrame <KNXIPHeader HeaderLength="6" ProtocolVersion="16" KNXIPServiceType="KNXIPServiceType.TUNNELLING_REQUEST" Reserve="0" TotalLength="21" />
634 body="<TunnellingRequest communication_channel_id="17" sequence_counter="12" cemi="<CEMIFrame SourceAddress="PhysicalAddress("15.15.242")" DestinationAddress="GroupAddress("5/0/1")" Flags="1011110011100000" Command="APCICommand.GROUP_READ" payload="None" />" />" />
6352020-10-30 11:14:04 DEBUG (MainThread) [xknx.raw_socket] Received from ('10.58.60.11', 3671): 06100421000a04110c00
6362020-10-30 11:14:04 DEBUG (MainThread) [xknx.knx] Received: <KNXIPFrame <KNXIPHeader HeaderLength="6" ProtocolVersion="16" KNXIPServiceType="KNXIPServiceType.TUNNELLING_ACK" Reserve="0" TotalLength="10" />
637 body="<TunnellingAck communication_channel_id="17" sequence_counter="12" status_code="ErrorCode.E_NO_ERROR" />" />
6382020-10-30 11:14:04 DEBUG (MainThread) [xknx.raw_socket] Received from ('10.58.60.11', 3671): 061004200017041117002900bce011032800030040062c
6392020-10-30 11:14:04 DEBUG (MainThread) [xknx.knx] Received: <KNXIPFrame <KNXIPHeader HeaderLength="6" ProtocolVersion="16" KNXIPServiceType="KNXIPServiceType.TUNNELLING_REQUEST" Reserve="0" TotalLength="23" />
640 body="<TunnellingRequest communication_channel_id="17" sequence_counter="23" cemi="<CEMIFrame SourceAddress="PhysicalAddress("1.1.3")" DestinationAddress="GroupAddress("5/0/0")" Flags="1011110011100000" Command="APCICommand.GROUP_RESPONSE" payload="<DPTArray value="[0x6,0x2c]" />" />" />" />
6412020-10-30 11:14:04 DEBUG (MainThread) [xknx.knx] Sending: <KNXIPFrame <KNXIPHeader HeaderLength="6" ProtocolVersion="16" KNXIPServiceType="KNXIPServiceType.TUNNELLING_ACK" Reserve="0" TotalLength="10" />
642 body="<TunnellingAck communication_channel_id="17" sequence_counter="23" status_code="ErrorCode.E_NO_ERROR" />" />
6432020-10-30 11:14:04 DEBUG (MainThread) [xknx.telegram] <Telegram group_address="GroupAddress("5/0/0")", payload="<DPTArray value="[0x6,0x2c]" />" telegramtype="TelegramType.GROUP_RESPONSE" direction="TelegramDirection.INCOMING" />
6442020-10-30 11:14:04 DEBUG (MainThread) [xknx.raw_socket] Received from ('10.58.60.11', 3671): 061004200015041118002e00bce0fff22801010000
6452020-10-30 11:14:04 DEBUG (MainThread) [xknx.knx] Received: <KNXIPFrame <KNXIPHeader HeaderLength="6" ProtocolVersion="16" KNXIPServiceType="KNXIPServiceType.TUNNELLING_REQUEST" Reserve="0" TotalLength="21" />
646 body="<TunnellingRequest communication_channel_id="17" sequence_counter="24" cemi="<CEMIFrame SourceAddress="PhysicalAddress("15.15.242")" DestinationAddress="GroupAddress("5/0/1")" Flags="1011110011100000" Command="APCICommand.GROUP_READ" payload="<DPTBinary value="0" />" />" />" />
6472020-10-30 11:14:04 DEBUG (MainThread) [xknx.knx] Sending: <KNXIPFrame <KNXIPHeader HeaderLength="6" ProtocolVersion="16" KNXIPServiceType="KNXIPServiceType.TUNNELLING_ACK" Reserve="0" TotalLength="10" />
648 body="<TunnellingAck communication_channel_id="17" sequence_counter="24" status_code="ErrorCode.E_NO_ERROR" />" />
6492020-10-30 11:14:04 DEBUG (MainThread) [xknx.telegram] <Telegram group_address="GroupAddress("5/0/4")", payload="None" telegramtype="TelegramType.GROUP_READ" direction="TelegramDirection.OUTGOING" />
6502020-10-30 11:14:04 DEBUG (MainThread) [xknx.knx] Sending: <KNXIPFrame <KNXIPHeader HeaderLength="6" ProtocolVersion="16" KNXIPServiceType="KNXIPServiceType.TUNNELLING_REQUEST" Reserve="0" TotalLength="21" />
651 body="<TunnellingRequest communication_channel_id="17" sequence_counter="13" cemi="<CEMIFrame SourceAddress="PhysicalAddress("15.15.242")" DestinationAddress="GroupAddress("5/0/4")" Flags="1011110011100000" Command="APCICommand.GROUP_READ" payload="None" />" />" />
6522020-10-30 11:14:04 DEBUG (MainThread) [xknx.raw_socket] Received from ('10.58.60.11', 3671): 06100421000a04110d00
6532020-10-30 11:14:04 DEBUG (MainThread) [xknx.knx] Received: <KNXIPFrame <KNXIPHeader HeaderLength="6" ProtocolVersion="16" KNXIPServiceType="KNXIPServiceType.TUNNELLING_ACK" Reserve="0" TotalLength="10" />
654 body="<TunnellingAck communication_channel_id="17" sequence_counter="13" status_code="ErrorCode.E_NO_ERROR" />" />
6552020-10-30 11:14:04 DEBUG (MainThread) [xknx.raw_socket] Received from ('10.58.60.11', 3671): 061004200017041119002900bce0110328010300401c8b
6562020-10-30 11:14:04 DEBUG (MainThread) [xknx.knx] Received: <KNXIPFrame <KNXIPHeader HeaderLength="6" ProtocolVersion="16" KNXIPServiceType="KNXIPServiceType.TUNNELLING_REQUEST" Reserve="0" TotalLength="23" />
657 body="<TunnellingRequest communication_channel_id="17" sequence_counter="25" cemi="<CEMIFrame SourceAddress="PhysicalAddress("1.1.3")" DestinationAddress="GroupAddress("5/0/1")" Flags="1011110011100000" Command="APCICommand.GROUP_RESPONSE" payload="<DPTArray value="[0x1c,0x8b]" />" />" />" />
6582020-10-30 11:14:04 DEBUG (MainThread) [xknx.knx] Sending: <KNXIPFrame <KNXIPHeader HeaderLength="6" ProtocolVersion="16" KNXIPServiceType="KNXIPServiceType.TUNNELLING_ACK" Reserve="0" TotalLength="10" />
659 body="<TunnellingAck communication_channel_id="17" sequence_counter="25" status_code="ErrorCode.E_NO_ERROR" />" />
6602020-10-30 11:14:04 DEBUG (MainThread) [xknx.telegram] <Telegram group_address="GroupAddress("5/0/1")", payload="<DPTArray value="[0x1c,0x8b]" />" telegramtype="TelegramType.GROUP_RESPONSE" direction="TelegramDirection.INCOMING" />
6612020-10-30 11:14:04 DEBUG (MainThread) [xknx.raw_socket] Received from ('10.58.60.11', 3671): 06100420001504111a002e00bce0fff22804010000
6622020-10-30 11:14:04 DEBUG (MainThread) [xknx.knx] Received: <KNXIPFrame <KNXIPHeader HeaderLength="6" ProtocolVersion="16" KNXIPServiceType="KNXIPServiceType.TUNNELLING_REQUEST" Reserve="0" TotalLength="21" />
663 body="<TunnellingRequest communication_channel_id="17" sequence_counter="26" cemi="<CEMIFrame SourceAddress="PhysicalAddress("15.15.242")" DestinationAddress="GroupAddress("5/0/4")" Flags="1011110011100000" Command="APCICommand.GROUP_READ" payload="<DPTBinary value="0" />" />" />" />
6642020-10-30 11:14:04 DEBUG (MainThread) [xknx.knx] Sending: <KNXIPFrame <KNXIPHeader HeaderLength="6" ProtocolVersion="16" KNXIPServiceType="KNXIPServiceType.TUNNELLING_ACK" Reserve="0" TotalLength="10" />
665 body="<TunnellingAck communication_channel_id="17" sequence_counter="26" status_code="ErrorCode.E_NO_ERROR" />" />
6662020-10-30 11:14:04 DEBUG (MainThread) [xknx.raw_socket] Received from ('10.58.60.11', 3671): 06100420001704111b002900bce0110728040300400c10
6672020-10-30 11:14:04 DEBUG (MainThread) [xknx.knx] Received: <KNXIPFrame <KNXIPHeader HeaderLength="6" ProtocolVersion="16" KNXIPServiceType="KNXIPServiceType.TUNNELLING_REQUEST" Reserve="0" TotalLength="23" />
668 body="<TunnellingRequest communication_channel_id="17" sequence_counter="27" cemi="<CEMIFrame SourceAddress="PhysicalAddress("1.1.7")" DestinationAddress="GroupAddress("5/0/4")" Flags="1011110011100000" Command="APCICommand.GROUP_RESPONSE" payload="<DPTArray value="[0xc,0x10]" />" />" />" />
6692020-10-30 11:14:04 DEBUG (MainThread) [xknx.knx] Sending: <KNXIPFrame <KNXIPHeader HeaderLength="6" ProtocolVersion="16" KNXIPServiceType="KNXIPServiceType.TUNNELLING_ACK" Reserve="0" TotalLength="10" />
670 body="<TunnellingAck communication_channel_id="17" sequence_counter="27" status_code="ErrorCode.E_NO_ERROR" />" />
6712020-10-30 11:14:04 DEBUG (MainThread) [xknx.telegram] <Telegram group_address="GroupAddress("5/0/4")", payload="<DPTArray value="[0xc,0x10]" />" telegramtype="TelegramType.GROUP_RESPONSE" direction="TelegramDirection.INCOMING" />
6722020-10-30 11:14:04 DEBUG (MainThread) [xknx.telegram] <Telegram group_address="GroupAddress("5/0/5")", payload="None" telegramtype="TelegramType.GROUP_READ" direction="TelegramDirection.OUTGOING" />
6732020-10-30 11:14:04 DEBUG (MainThread) [xknx.knx] Sending: <KNXIPFrame <KNXIPHeader HeaderLength="6" ProtocolVersion="16" KNXIPServiceType="KNXIPServiceType.TUNNELLING_REQUEST" Reserve="0" TotalLength="21" />
674 body="<TunnellingRequest communication_channel_id="17" sequence_counter="14" cemi="<CEMIFrame SourceAddress="PhysicalAddress("15.15.242")" DestinationAddress="GroupAddress("5/0/5")" Flags="1011110011100000" Command="APCICommand.GROUP_READ" payload="None" />" />" />
6752020-10-30 11:14:04 DEBUG (MainThread) [xknx.raw_socket] Received from ('10.58.60.11', 3671): 06100421000a04110e00
6762020-10-30 11:14:04 DEBUG (MainThread) [xknx.knx] Received: <KNXIPFrame <KNXIPHeader HeaderLength="6" ProtocolVersion="16" KNXIPServiceType="KNXIPServiceType.TUNNELLING_ACK" Reserve="0" TotalLength="10" />
677 body="<TunnellingAck communication_channel_id="17" sequence_counter="14" status_code="ErrorCode.E_NO_ERROR" />" />
6782020-10-30 11:14:04 DEBUG (MainThread) [xknx.raw_socket] Received from ('10.58.60.11', 3671): 06100420001504111c002e00bce0fff22805010000
6792020-10-30 11:14:04 DEBUG (MainThread) [xknx.knx] Received: <KNXIPFrame <KNXIPHeader HeaderLength="6" ProtocolVersion="16" KNXIPServiceType="KNXIPServiceType.TUNNELLING_REQUEST" Reserve="0" TotalLength="21" />
680 body="<TunnellingRequest communication_channel_id="17" sequence_counter="28" cemi="<CEMIFrame SourceAddress="PhysicalAddress("15.15.242")" DestinationAddress="GroupAddress("5/0/5")" Flags="1011110011100000" Command="APCICommand.GROUP_READ" payload="<DPTBinary value="0" />" />" />" />
6812020-10-30 11:14:04 DEBUG (MainThread) [xknx.knx] Sending: <KNXIPFrame <KNXIPHeader HeaderLength="6" ProtocolVersion="16" KNXIPServiceType="KNXIPServiceType.TUNNELLING_ACK" Reserve="0" TotalLength="10" />
682 body="<TunnellingAck communication_channel_id="17" sequence_counter="28" status_code="ErrorCode.E_NO_ERROR" />" />
6832020-10-30 11:14:04 DEBUG (MainThread) [xknx.raw_socket] Received from ('10.58.60.11', 3671): 06100420001704111d002900bce0110728050300401c99
6842020-10-30 11:14:04 DEBUG (MainThread) [xknx.knx] Received: <KNXIPFrame <KNXIPHeader HeaderLength="6" ProtocolVersion="16" KNXIPServiceType="KNXIPServiceType.TUNNELLING_REQUEST" Reserve="0" TotalLength="23" />
685 body="<TunnellingRequest communication_channel_id="17" sequence_counter="29" cemi="<CEMIFrame SourceAddress="PhysicalAddress("1.1.7")" DestinationAddress="GroupAddress("5/0/5")" Flags="1011110011100000" Command="APCICommand.GROUP_RESPONSE" payload="<DPTArray value="[0x1c,0x99]" />" />" />" />
6862020-10-30 11:14:04 DEBUG (MainThread) [xknx.knx] Sending: <KNXIPFrame <KNXIPHeader HeaderLength="6" ProtocolVersion="16" KNXIPServiceType="KNXIPServiceType.TUNNELLING_ACK" Reserve="0" TotalLength="10" />
687 body="<TunnellingAck communication_channel_id="17" sequence_counter="29" status_code="ErrorCode.E_NO_ERROR" />" />
6882020-10-30 11:14:04 DEBUG (MainThread) [xknx.telegram] <Telegram group_address="GroupAddress("5/0/5")", payload="<DPTArray value="[0x1c,0x99]" />" telegramtype="TelegramType.GROUP_RESPONSE" direction="TelegramDirection.INCOMING" />
6892020-10-30 11:14:04 DEBUG (MainThread) [xknx.telegram] <Telegram group_address="GroupAddress("5/0/7")", payload="None" telegramtype="TelegramType.GROUP_READ" direction="TelegramDirection.OUTGOING" />
6902020-10-30 11:14:04 DEBUG (MainThread) [xknx.knx] Sending: <KNXIPFrame <KNXIPHeader HeaderLength="6" ProtocolVersion="16" KNXIPServiceType="KNXIPServiceType.TUNNELLING_REQUEST" Reserve="0" TotalLength="21" />
691 body="<TunnellingRequest communication_channel_id="17" sequence_counter="15" cemi="<CEMIFrame SourceAddress="PhysicalAddress("15.15.242")" DestinationAddress="GroupAddress("5/0/7")" Flags="1011110011100000" Command="APCICommand.GROUP_READ" payload="None" />" />" />
6922020-10-30 11:14:04 DEBUG (MainThread) [xknx.raw_socket] Received from ('10.58.60.11', 3671): 06100421000a04110f00
6932020-10-30 11:14:04 DEBUG (MainThread) [xknx.knx] Received: <KNXIPFrame <KNXIPHeader HeaderLength="6" ProtocolVersion="16" KNXIPServiceType="KNXIPServiceType.TUNNELLING_ACK" Reserve="0" TotalLength="10" />
694 body="<TunnellingAck communication_channel_id="17" sequence_counter="15" status_code="ErrorCode.E_NO_ERROR" />" />
6952020-10-30 11:14:04 DEBUG (MainThread) [xknx.raw_socket] Received from ('10.58.60.11', 3671): 06100420001504111e002e00bce0fff22807010000
6962020-10-30 11:14:04 DEBUG (MainThread) [xknx.knx] Received: <KNXIPFrame <KNXIPHeader HeaderLength="6" ProtocolVersion="16" KNXIPServiceType="KNXIPServiceType.TUNNELLING_REQUEST" Reserve="0" TotalLength="21" />
697 body="<TunnellingRequest communication_channel_id="17" sequence_counter="30" cemi="<CEMIFrame SourceAddress="PhysicalAddress("15.15.242")" DestinationAddress="GroupAddress("5/0/7")" Flags="1011110011100000" Command="APCICommand.GROUP_READ" payload="<DPTBinary value="0" />" />" />" />
6982020-10-30 11:14:04 DEBUG (MainThread) [xknx.knx] Sending: <KNXIPFrame <KNXIPHeader HeaderLength="6" ProtocolVersion="16" KNXIPServiceType="KNXIPServiceType.TUNNELLING_ACK" Reserve="0" TotalLength="10" />
699 body="<TunnellingAck communication_channel_id="17" sequence_counter="30" status_code="ErrorCode.E_NO_ERROR" />" />
7002020-10-30 11:14:04 DEBUG (MainThread) [xknx.raw_socket] Received from ('10.58.60.11', 3671): 06100420001704111f002900bce011082807030040056e
7012020-10-30 11:14:04 DEBUG (MainThread) [xknx.knx] Received: <KNXIPFrame <KNXIPHeader HeaderLength="6" ProtocolVersion="16" KNXIPServiceType="KNXIPServiceType.TUNNELLING_REQUEST" Reserve="0" TotalLength="23" />
702 body="<TunnellingRequest communication_channel_id="17" sequence_counter="31" cemi="<CEMIFrame SourceAddress="PhysicalAddress("1.1.8")" DestinationAddress="GroupAddress("5/0/7")" Flags="1011110011100000" Command="APCICommand.GROUP_RESPONSE" payload="<DPTArray value="[0x5,0x6e]" />" />" />" />
7032020-10-30 11:14:04 DEBUG (MainThread) [xknx.knx] Sending: <KNXIPFrame <KNXIPHeader HeaderLength="6" ProtocolVersion="16" KNXIPServiceType="KNXIPServiceType.TUNNELLING_ACK" Reserve="0" TotalLength="10" />
704 body="<TunnellingAck communication_channel_id="17" sequence_counter="31" status_code="ErrorCode.E_NO_ERROR" />" />
7052020-10-30 11:14:04 DEBUG (MainThread) [xknx.telegram] <Telegram group_address="GroupAddress("5/0/7")", payload="<DPTArray value="[0x5,0x6e]" />" telegramtype="TelegramType.GROUP_RESPONSE" direction="TelegramDirection.INCOMING" />
7062020-10-30 11:14:04 DEBUG (MainThread) [xknx.telegram] <Telegram group_address="GroupAddress("5/0/9")", payload="None" telegramtype="TelegramType.GROUP_READ" direction="TelegramDirection.OUTGOING" />
7072020-10-30 11:14:04 DEBUG (MainThread) [xknx.knx] Sending: <KNXIPFrame <KNXIPHeader HeaderLength="6" ProtocolVersion="16" KNXIPServiceType="KNXIPServiceType.TUNNELLING_REQUEST" Reserve="0" TotalLength="21" />
708 body="<TunnellingRequest communication_channel_id="17" sequence_counter="16" cemi="<CEMIFrame SourceAddress="PhysicalAddress("15.15.242")" DestinationAddress="GroupAddress("5/0/9")" Flags="1011110011100000" Command="APCICommand.GROUP_READ" payload="None" />" />" />
7092020-10-30 11:14:04 INFO (MainThread) [custom_components.visonic.pyvisonic] [data receiver] *** Received validated message 0X2 ***
7102020-10-30 11:14:04 INFO (MainThread) [custom_components.visonic.pyvisonic] [data receiver] *** Received validated message 0X8 ***
7112020-10-30 11:14:04 INFO (MainThread) [custom_components.visonic.pyvisonic] [handle_msgtype08] Access Denied  len 0 data 
7122020-10-30 11:14:04 DEBUG (MainThread) [xknx.raw_socket] Received from ('10.58.60.11', 3671): 06100421000a04111000
7132020-10-30 11:14:04 DEBUG (MainThread) [xknx.knx] Received: <KNXIPFrame <KNXIPHeader HeaderLength="6" ProtocolVersion="16" KNXIPServiceType="KNXIPServiceType.TUNNELLING_ACK" Reserve="0" TotalLength="10" />
714 body="<TunnellingAck communication_channel_id="17" sequence_counter="16" status_code="ErrorCode.E_NO_ERROR" />" />
7152020-10-30 11:14:04 DEBUG (MainThread) [xknx.raw_socket] Received from ('10.58.60.11', 3671): 061004200015041120002e00bce0fff22809010000
7162020-10-30 11:14:04 DEBUG (MainThread) [xknx.knx] Received: <KNXIPFrame <KNXIPHeader HeaderLength="6" ProtocolVersion="16" KNXIPServiceType="KNXIPServiceType.TUNNELLING_REQUEST" Reserve="0" TotalLength="21" />
717 body="<TunnellingRequest communication_channel_id="17" sequence_counter="32" cemi="<CEMIFrame SourceAddress="PhysicalAddress("15.15.242")" DestinationAddress="GroupAddress("5/0/9")" Flags="1011110011100000" Command="APCICommand.GROUP_READ" payload="<DPTBinary value="0" />" />" />" />
7182020-10-30 11:14:04 DEBUG (MainThread) [xknx.knx] Sending: <KNXIPFrame <KNXIPHeader HeaderLength="6" ProtocolVersion="16" KNXIPServiceType="KNXIPServiceType.TUNNELLING_ACK" Reserve="0" TotalLength="10" />
719 body="<TunnellingAck communication_channel_id="17" sequence_counter="32" status_code="ErrorCode.E_NO_ERROR" />" />
7202020-10-30 11:14:04 DEBUG (MainThread) [xknx.raw_socket] Received from ('10.58.60.11', 3671): 061004200017041121002900bce0110828090300400726
7212020-10-30 11:14:04 DEBUG (MainThread) [xknx.knx] Received: <KNXIPFrame <KNXIPHeader HeaderLength="6" ProtocolVersion="16" KNXIPServiceType="KNXIPServiceType.TUNNELLING_REQUEST" Reserve="0" TotalLength="23" />
722 body="<TunnellingRequest communication_channel_id="17" sequence_counter="33" cemi="<CEMIFrame SourceAddress="PhysicalAddress("1.1.8")" DestinationAddress="GroupAddress("5/0/9")" Flags="1011110011100000" Command="APCICommand.GROUP_RESPONSE" payload="<DPTArray value="[0x7,0x26]" />" />" />" />
7232020-10-30 11:14:04 DEBUG (MainThread) [xknx.knx] Sending: <KNXIPFrame <KNXIPHeader HeaderLength="6" ProtocolVersion="16" KNXIPServiceType="KNXIPServiceType.TUNNELLING_ACK" Reserve="0" TotalLength="10" />
724 body="<TunnellingAck communication_channel_id="17" sequence_counter="33" status_code="ErrorCode.E_NO_ERROR" />" />
7252020-10-30 11:14:04 DEBUG (MainThread) [xknx.telegram] <Telegram group_address="GroupAddress("5/0/9")", payload="<DPTArray value="[0x7,0x26]" />" telegramtype="TelegramType.GROUP_RESPONSE" direction="TelegramDirection.INCOMING" />
7262020-10-30 11:14:04 DEBUG (MainThread) [xknx.telegram] <Telegram group_address="GroupAddress("5/0/11")", payload="None" telegramtype="TelegramType.GROUP_READ" direction="TelegramDirection.OUTGOING" />
7272020-10-30 11:14:04 DEBUG (MainThread) [xknx.knx] Sending: <KNXIPFrame <KNXIPHeader HeaderLength="6" ProtocolVersion="16" KNXIPServiceType="KNXIPServiceType.TUNNELLING_REQUEST" Reserve="0" TotalLength="21" />
728 body="<TunnellingRequest communication_channel_id="17" sequence_counter="17" cemi="<CEMIFrame SourceAddress="PhysicalAddress("15.15.242")" DestinationAddress="GroupAddress("5/0/11")" Flags="1011110011100000" Command="APCICommand.GROUP_READ" payload="None" />" />" />
7292020-10-30 11:14:04 DEBUG (MainThread) [xknx.raw_socket] Received from ('10.58.60.11', 3671): 06100421000a04111100
7302020-10-30 11:14:04 DEBUG (MainThread) [xknx.knx] Received: <KNXIPFrame <KNXIPHeader HeaderLength="6" ProtocolVersion="16" KNXIPServiceType="KNXIPServiceType.TUNNELLING_ACK" Reserve="0" TotalLength="10" />
731 body="<TunnellingAck communication_channel_id="17" sequence_counter="17" status_code="ErrorCode.E_NO_ERROR" />" />
7322020-10-30 11:14:04 DEBUG (MainThread) [xknx.raw_socket] Received from ('10.58.60.11', 3671): 061004200015041122002e00bce0fff2280b010000
7332020-10-30 11:14:04 DEBUG (MainThread) [xknx.knx] Received: <KNXIPFrame <KNXIPHeader HeaderLength="6" ProtocolVersion="16" KNXIPServiceType="KNXIPServiceType.TUNNELLING_REQUEST" Reserve="0" TotalLength="21" />
734 body="<TunnellingRequest communication_channel_id="17" sequence_counter="34" cemi="<CEMIFrame SourceAddress="PhysicalAddress("15.15.242")" DestinationAddress="GroupAddress("5/0/11")" Flags="1011110011100000" Command="APCICommand.GROUP_READ" payload="<DPTBinary value="0" />" />" />" />
7352020-10-30 11:14:04 DEBUG (MainThread) [xknx.knx] Sending: <KNXIPFrame <KNXIPHeader HeaderLength="6" ProtocolVersion="16" KNXIPServiceType="KNXIPServiceType.TUNNELLING_ACK" Reserve="0" TotalLength="10" />
736 body="<TunnellingAck communication_channel_id="17" sequence_counter="34" status_code="ErrorCode.E_NO_ERROR" />" />
7372020-10-30 11:14:05 DEBUG (MainThread) [xknx.raw_socket] Received from ('10.58.60.11', 3671): 061004200017041123002900bce01109280b030040060e
7382020-10-30 11:14:05 DEBUG (MainThread) [xknx.knx] Received: <KNXIPFrame <KNXIPHeader HeaderLength="6" ProtocolVersion="16" KNXIPServiceType="KNXIPServiceType.TUNNELLING_REQUEST" Reserve="0" TotalLength="23" />
739 body="<TunnellingRequest communication_channel_id="17" sequence_counter="35" cemi="<CEMIFrame SourceAddress="PhysicalAddress("1.1.9")" DestinationAddress="GroupAddress("5/0/11")" Flags="1011110011100000" Command="APCICommand.GROUP_RESPONSE" payload="<DPTArray value="[0x6,0xe]" />" />" />" />
7402020-10-30 11:14:05 DEBUG (MainThread) [xknx.knx] Sending: <KNXIPFrame <KNXIPHeader HeaderLength="6" ProtocolVersion="16" KNXIPServiceType="KNXIPServiceType.TUNNELLING_ACK" Reserve="0" TotalLength="10" />
741 body="<TunnellingAck communication_channel_id="17" sequence_counter="35" status_code="ErrorCode.E_NO_ERROR" />" />
7422020-10-30 11:14:05 DEBUG (MainThread) [xknx.telegram] <Telegram group_address="GroupAddress("5/0/11")", payload="<DPTArray value="[0x6,0xe]" />" telegramtype="TelegramType.GROUP_RESPONSE" direction="TelegramDirection.INCOMING" />
7432020-10-30 11:14:05 DEBUG (MainThread) [xknx.telegram] <Telegram group_address="GroupAddress("5/0/10")", payload="None" telegramtype="TelegramType.GROUP_READ" direction="TelegramDirection.OUTGOING" />
7442020-10-30 11:14:05 DEBUG (MainThread) [xknx.knx] Sending: <KNXIPFrame <KNXIPHeader HeaderLength="6" ProtocolVersion="16" KNXIPServiceType="KNXIPServiceType.TUNNELLING_REQUEST" Reserve="0" TotalLength="21" />
745 body="<TunnellingRequest communication_channel_id="17" sequence_counter="18" cemi="<CEMIFrame SourceAddress="PhysicalAddress("15.15.242")" DestinationAddress="GroupAddress("5/0/10")" Flags="1011110011100000" Command="APCICommand.GROUP_READ" payload="None" />" />" />
7462020-10-30 11:14:05 DEBUG (MainThread) [xknx.raw_socket] Received from ('10.58.60.11', 3671): 06100421000a04111200
7472020-10-30 11:14:05 DEBUG (MainThread) [xknx.knx] Received: <KNXIPFrame <KNXIPHeader HeaderLength="6" ProtocolVersion="16" KNXIPServiceType="KNXIPServiceType.TUNNELLING_ACK" Reserve="0" TotalLength="10" />
748 body="<TunnellingAck communication_channel_id="17" sequence_counter="18" status_code="ErrorCode.E_NO_ERROR" />" />
7492020-10-30 11:14:05 DEBUG (MainThread) [xknx.raw_socket] Received from ('10.58.60.11', 3671): 061004200015041124002e00bce0fff2280a010000
7502020-10-30 11:14:05 DEBUG (MainThread) [xknx.knx] Received: <KNXIPFrame <KNXIPHeader HeaderLength="6" ProtocolVersion="16" KNXIPServiceType="KNXIPServiceType.TUNNELLING_REQUEST" Reserve="0" TotalLength="21" />
751 body="<TunnellingRequest communication_channel_id="17" sequence_counter="36" cemi="<CEMIFrame SourceAddress="PhysicalAddress("15.15.242")" DestinationAddress="GroupAddress("5/0/10")" Flags="1011110011100000" Command="APCICommand.GROUP_READ" payload="<DPTBinary value="0" />" />" />" />
7522020-10-30 11:14:05 DEBUG (MainThread) [xknx.knx] Sending: <KNXIPFrame <KNXIPHeader HeaderLength="6" ProtocolVersion="16" KNXIPServiceType="KNXIPServiceType.TUNNELLING_ACK" Reserve="0" TotalLength="10" />
753 body="<TunnellingAck communication_channel_id="17" sequence_counter="36" status_code="ErrorCode.E_NO_ERROR" />" />
7542020-10-30 11:14:05 DEBUG (MainThread) [xknx.raw_socket] Received from ('10.58.60.11', 3671): 061004200017041125002900bce01109280a0300401d47
7552020-10-30 11:14:05 DEBUG (MainThread) [xknx.knx] Received: <KNXIPFrame <KNXIPHeader HeaderLength="6" ProtocolVersion="16" KNXIPServiceType="KNXIPServiceType.TUNNELLING_REQUEST" Reserve="0" TotalLength="23" />
756 body="<TunnellingRequest communication_channel_id="17" sequence_counter="37" cemi="<CEMIFrame SourceAddress="PhysicalAddress("1.1.9")" DestinationAddress="GroupAddress("5/0/10")" Flags="1011110011100000" Command="APCICommand.GROUP_RESPONSE" payload="<DPTArray value="[0x1d,0x47]" />" />" />" />
7572020-10-30 11:14:05 DEBUG (MainThread) [xknx.knx] Sending: <KNXIPFrame <KNXIPHeader HeaderLength="6" ProtocolVersion="16" KNXIPServiceType="KNXIPServiceType.TUNNELLING_ACK" Reserve="0" TotalLength="10" />
758 body="<TunnellingAck communication_channel_id="17" sequence_counter="37" status_code="ErrorCode.E_NO_ERROR" />" />
7592020-10-30 11:14:05 DEBUG (MainThread) [xknx.telegram] <Telegram group_address="GroupAddress("5/0/10")", payload="<DPTArray value="[0x1d,0x47]" />" telegramtype="TelegramType.GROUP_RESPONSE" direction="TelegramDirection.INCOMING" />
7602020-10-30 11:14:05 INFO (MainThread) [custom_components.hacs.repository.integration.hacs.integration] Registration completed
7612020-10-30 11:14:05 WARNING (MainThread) [homeassistant.bootstrap] Waiting on integrations to complete setup: hacs
7622020-10-30 11:14:05 INFO (MainThread) [custom_components.hacs.data] Restore started
7632020-10-30 11:14:09 INFO (SyncWorker_10) [custom_components.samsungtv_encrypted.media_player] RenderingControl uPNP service detected in http://10.58.60.16:7676/MediaRenderer/RenderingControl/Control
7642020-10-30 11:14:09 INFO (SyncWorker_10) [custom_components.samsungtv_encrypted.media_player] MainTVAgent2 uPNP service detected in http://10.58.60.16:7676/smp_19_
7652020-10-30 11:14:09 INFO (MainThread) [custom_components.visonic.pyvisonic] [data receiver] *** Received validated message 0X2 ***
7662020-10-30 11:14:09 INFO (MainThread) [custom_components.visonic.pyvisonic] [data receiver] *** Received validated message 0X3C ***
7672020-10-30 11:14:09 INFO (MainThread) [custom_components.visonic.pyvisonic] [handle_msgtype3C] PanelType=2 : PowerMax Pro , Model=22   Powermaster False
7682020-10-30 11:14:09 INFO (MainThread) [custom_components.visonic.pyvisonic] [Panel Settings] Uploading panel settings
7692020-10-30 11:14:09 INFO (MainThread) [custom_components.hacs.data] Restore done
7702020-10-30 11:14:09 INFO (MainThread) [custom_components.hacs] Setup task HacsSetupTask.SENSOR
7712020-10-30 11:14:09 INFO (MainThread) [custom_components.hacs] Stage changed: HacsStage.WAITING
7722020-10-30 11:14:09 INFO (MainThread) [custom_components.hacs] Setup complete, waiting for Home Assistant before startup tasks starts
7732020-10-30 11:14:09 INFO (MainThread) [homeassistant.components.sensor] Setting up sensor.hacs
7742020-10-30 11:14:09 INFO (MainThread) [custom_components.visonic.pyvisonic] [data receiver] *** Received validated message 0X2 ***
7752020-10-30 11:14:10 INFO (MainThread) [custom_components.visonic.pyvisonic] [data receiver] *** Received validated message 0X3F ***
7762020-10-30 11:14:10 INFO (MainThread) [custom_components.visonic.pyvisonic] [data receiver] *** Received validated message 0X2 ***
7772020-10-30 11:14:10 INFO (MainThread) [custom_components.visonic.pyvisonic] [data receiver] *** Received validated message 0X3F ***
7782020-10-30 11:14:10 INFO (MainThread) [custom_components.visonic.pyvisonic] [data receiver] *** Received validated message 0X2 ***
7792020-10-30 11:14:10 INFO (MainThread) [homeassistant.bootstrap] Home Assistant initialized in 73.32s
7802020-10-30 11:14:10 INFO (MainThread) [homeassistant.core] Starting Home Assistant
7812020-10-30 11:14:10 INFO (SyncWorker_32) [homeassistant.components.zwave] Starting Z-Wave network...
7822020-10-30 11:14:10 INFO (SyncWorker_32) [openzwave] Start Openzwave network.
7832020-10-30 11:14:11 ERROR (MainThread) [homeassistant.components.template.cover] could not convert string to float: 'unknown'
7842020-10-30 11:14:11 ERROR (MainThread) [homeassistant.components.template.template_entity] Error validating template result 'mdi-window-open' from template 'Template("{% if states('sensor.slaapkamer_m_m_rolgordijn_links_positie')|float < 100 %}
785  mdi-window-open
786{% else %}
787  mdi-window-closed
788{% endif %}")' for attribute '_icon' in entity cover.shade validation message 'contains non-whitespace: mdi-window-open'
7892020-10-30 11:14:11 INFO (Dummy-32) [openzwave] Driver ready using library Static Controller version Z-Wave 3.95
7902020-10-30 11:14:11 INFO (Dummy-32) [openzwave] home_id 0xeb613086, controller node id is 1
7912020-10-30 11:14:13 INFO (MainThread) [custom_components.visonic.pyvisonic] [data receiver] *** Received validated message 0X3F ***
7922020-10-30 11:14:13 INFO (MainThread) [homeassistant.core] Timer:starting
7932020-10-30 11:14:14 INFO (SyncWorker_26) [homeassistant.components.zeroconf] Starting Zeroconf broadcast
7942020-10-30 11:14:14 INFO (MainThread) [custom_components.hacs] Stage changed: HacsStage.STARTUP
7952020-10-30 11:14:14 INFO (MainThread) [custom_components.hacs] setup task HacsSetupTask.CATEGORIES
7962020-10-30 11:14:15 INFO (MainThread) [homeassistant.components.automation.1_0_0_switch_light_sk_valentijn_to_brightness_level] Initialized trigger 1.0.0 Switch Light SK Valentijn to Brightness Level
7972020-10-30 11:14:15 INFO (MainThread) [homeassistant.components.automation.1_1_0_switch_light_sk_friso_to_brightness_level] Initialized trigger 1.1.0 Switch Light SK Friso to Brightness Level
7982020-10-30 11:14:15 INFO (MainThread) [homeassistant.components.automation.1_2_0_switch_light_sk_m_m_to_brightness_level] Initialized trigger 1.2.0 Switch Light SK M&M to Brightness Level
7992020-10-30 11:14:15 INFO (MainThread) [homeassistant.components.automation.1_3_0_switch_light_bureau_to_brightness_level] Initialized trigger 1.3.0 Switch Light Bureau to Brightness Level
8002020-10-30 11:14:15 INFO (MainThread) [homeassistant.components.automation.1_4_0_switch_light_lichtbalk_badkamer_on_when_badkamer_light_is_switched_on] Initialized trigger 1.4.0 switch_light_lichtbalk_badkamer_on_when_badkamer_light_is_switched_on
8012020-10-30 11:14:15 INFO (MainThread) [homeassistant.components.automation.1_4_1_switch_light_wastafel_off_if_badkamer_light_is_switched_off] Initialized trigger 1.4.1 Switch Light Wastafel Off if Badkamer Light is Switched Off
8022020-10-30 11:14:15 INFO (MainThread) [homeassistant.components.automation.1_5_0_schemerlampen_aan_na_sunset] Initialized trigger 1.5.0 Schemerlampen Aan Na Sunset
8032020-10-30 11:14:15 INFO (MainThread) [homeassistant.components.automation.1_5_1_schemerlampen_uit_in_de_nacht] Initialized trigger 1.5.1 Schemerlampen Uit In De Nacht
8042020-10-30 11:14:15 INFO (MainThread) [homeassistant.components.automation.1_6_0_switch_light_terras_buiten_on_after_sunset] Initialized trigger 1.6.0 Switch Light Terras Buiten On After Sunset
8052020-10-30 11:14:15 INFO (MainThread) [homeassistant.components.automation.1_6_1_switch_light_terras_buiten_main_to_brightness_level] Initialized trigger 1.6.1 Switch Light Terras Buiten Main to Brightness Level
8062020-10-30 11:14:15 INFO (MainThread) [homeassistant.components.automation.1_6_2_switch_light_terras_buiten_off_after_midnight] Initialized trigger 1.6.2 Switch Light Terras Buiten Off After Midnight
8072020-10-30 11:14:15 INFO (MainThread) [homeassistant.components.automation.1_7_0_switch_light_terras_binnen_main_to_brightness_level] Initialized trigger 1.7.0 Switch Light Terras Binnen Main to Brightness Level
8082020-10-30 11:14:15 INFO (MainThread) [homeassistant.components.automation.1_8_0_kamer_valentijn_switch_light_off_as_noone_in_slaapkamer_valentijn] Initialized trigger 1.8.0 Kamer Valentijn Switch Light Off As NoOne in Slaapkamer Valentijn
8092020-10-30 11:14:15 INFO (MainThread) [homeassistant.components.automation.1_8_1_kamer_valentijn_switch_light_off_as_curtuns_are_opened] Initialized trigger 1.8.1 Kamer Valentijn Switch Light Off As Curtuns are Opened
8102020-10-30 11:14:15 INFO (MainThread) [homeassistant.components.automation.1_9_0_kamer_friso_switch_light_off_as_noone_in_slaapkamer_friso] Initialized trigger 1.9.0 Kamer Friso Switch Light Off As NoOne in Slaapkamer Friso
8112020-10-30 11:14:15 INFO (MainThread) [homeassistant.components.automation.1_9_1_kamer_friso_switch_light_off_as_as_curtuns_are_opened] Initialized trigger 1.9.1 Kamer Friso Switch Light Off As As Curtuns are Opened
8122020-10-30 11:14:15 INFO (MainThread) [homeassistant.components.automation.1_10_0_kamer_m_m_switch_light_off_as_noone_in_slaapkamer_m_m] Initialized trigger 1.10.0 Kamer M&M Switch Light Off As NoOne in Slaapkamer M&M
8132020-10-30 11:14:15 INFO (MainThread) [homeassistant.components.automation.1_11_0_wwitch_light_lichtbalk_wc_boven_when_light_wc_boven_is_switched_on] Initialized trigger 1.11.0 Wwitch_light_lichtbalk_wc_boven_when_light_wc_boven_is_switched_on
8142020-10-30 11:14:15 INFO (MainThread) [homeassistant.components.automation.1_11_1_switch_light_lichtbalk_wc_boven_off_when_licht_wc_boven_is_switched_off] Initialized trigger 1.11.1 switch_light_lichtbalk_wc_boven_off_when_licht_wc_boven_is_switched_off
8152020-10-30 11:14:15 INFO (MainThread) [homeassistant.components.automation.1_12_0_gang_boven_switch_light_off_as_noone_in_gang_boven] Initialized trigger 1.12.0 Gang Boven Switch Light Off As NoOne in Gang Boven
8162020-10-30 11:14:15 INFO (MainThread) [homeassistant.components.automation.1_13_0_switch_light_gang_boven_to_high_lux_level_before_22_00] Initialized trigger 1.13.0 Switch Light Gang Boven to High Lux Level Before 22:00
8172020-10-30 11:14:15 INFO (MainThread) [homeassistant.components.automation.1_14_0_gang_boven_switch_light_on_after_22_00_00_at_low_lux_level] Initialized trigger 1.14.0 Gang Boven Switch Light On After 22:00:00 At Low Lux Level
8182020-10-30 11:14:15 INFO (MainThread) [homeassistant.components.automation.1_15_0_gang_boven_switch_light_on_before_22_00_at_high_lux_levels] Initialized trigger 1.15.0 Gang Boven Switch Light On before 22:00 at high Lux Levels
8192020-10-30 11:14:15 INFO (MainThread) [homeassistant.components.automation.switch_sonos_off_when_tv_swithes_on_2] Initialized trigger 2.0.0 Switch Sonos Off, when TV swithes on.
8202020-10-30 11:14:15 INFO (MainThread) [homeassistant.components.automation.2_1_0_switch_sonos_on_after_tv_is_switched_off_overdag] Initialized trigger 2.1.0 Switch Sonos On After TV is Switched Off Overdag.
8212020-10-30 11:14:15 INFO (MainThread) [homeassistant.components.automation.2_1_1_switch_sonos_on_after_tv_is_switched_off_in_de_evening] Initialized trigger 2.1.1 Switch Sonos On After TV is Switched Off In de Evening.
8222020-10-30 11:14:15 INFO (MainThread) [homeassistant.components.automation.2_2_0_switch_sonos_on_at_time_before_18_44] Initialized trigger 2.2.0 Switch Sonos on at Time Before 18:44
8232020-10-30 11:14:15 INFO (MainThread) [homeassistant.components.automation.2_2_1_move_volume_up_switch_sonos_on_at_time_after_18_45] Initialized trigger 2.2.1 Move Volume Up Switch Sonos on at Time after 18:45
8242020-10-30 11:14:15 INFO (MainThread) [homeassistant.components.automation.2_3_0_switch_sonos_off_at_21_30_during_weekdays] Initialized trigger 2.3.0 Switch Sonos Off at 21:30 During Weekdays
8252020-10-30 11:14:15 INFO (MainThread) [homeassistant.components.automation.3_0_0_open_left_blind_based_on_time] Initialized trigger 3.0.0 Open left blind based on time
8262020-10-30 11:14:15 INFO (MainThread) [homeassistant.components.automation.3_1_0_open_right_blind_based_on_time] Initialized trigger 3.1.0 Open right blind based on time
8272020-10-30 11:14:15 INFO (MainThread) [homeassistant.components.automation.3_2_0_close_left_blind_based_on_time] Initialized trigger 3.2.0 close left blind based on time
8282020-10-30 11:14:15 INFO (MainThread) [homeassistant.components.automation.3_3_0_close_right_blind_based_on_time] Initialized trigger 3.3.0 close right blind based on time
8292020-10-30 11:14:15 INFO (MainThread) [homeassistant.components.automation.3_4_0_close_right_blind_if_lux_and_temp_above_a_value] Initialized trigger 3.4.0 Close right blind If Lux And Temp Above a Value
8302020-10-30 11:14:15 INFO (MainThread) [homeassistant.components.automation.3_4_1_open_right_blind_if_lux_and_temp_below_a_value] Initialized trigger 3.4.1 Open right blind If Lux And Temp Below a Value
8312020-10-30 11:14:15 INFO (MainThread) [homeassistant.components.automation.3_4_2_auto_trigger_kamer_m_m_lux_and_temp_above_value_back_to_default] Initialized trigger 3.4.2 auto_trigger_kamer_m_m_lux_and_temp_above_value Back to Default
8322020-10-30 11:14:15 INFO (MainThread) [homeassistant.components.automation.4_0_0_switch_tv_off_at_night_when_no_one_is_beneden] Initialized trigger 4.0.0 switch tv off at night when no one is beneden
8332020-10-30 11:14:15 INFO (MainThread) [homeassistant.components.automation.4_1_0_sync_state_switch_tv_front_end_with_reality] Initialized trigger 4.1.0 Sync state switch tv front-end with reality
8342020-10-30 11:14:15 INFO (MainThread) [homeassistant.components.automation.4_2_0_mute_tv_if_intercom_rings] Initialized trigger 4.2.0 Mute TV If Intercom Rings
8352020-10-30 11:14:15 INFO (MainThread) [homeassistant.components.automation.4_3_0_switch_tv_off_when_no_one_is_in_the_livingroom] Initialized trigger 4.3.0 switch tv off when no one is in the livingroom
8362020-10-30 11:14:15 INFO (MainThread) [homeassistant.components.automation.5_0_0_alarm_armed_so_turn_lights_off_boven] Initialized trigger 5.0.0. Alarm Armed So Turn Lights Off Boven
8372020-10-30 11:14:15 INFO (MainThread) [homeassistant.components.automation.5_1_0_switch_sonos_off_when_alarm_is_switched_on] Initialized trigger 5.1.0 Switch Sonos Off When Alarm Is Switched On
8382020-10-30 11:14:15 INFO (MainThread) [homeassistant.components.automation.5_2_0_switch_tv_off_when_alarm_is_switched_on] Initialized trigger 5.2.0 Switch TV Off When Alarm Is Switched On
8392020-10-30 11:14:15 INFO (MainThread) [homeassistant.components.automation.5_3_0_switch_sonos_on_at_time_before_18_44_when_alarm_is_switched_off] Initialized trigger 5.3.0 Switch Sonos ON at Time Before 18:44 When Alarm Is Switched OFF
8402020-10-30 11:14:15 INFO (MainThread) [homeassistant.components.automation.5_3_1_switch_sonos_on_at_time_after_18_45_when_alarm_is_switched_off] Initialized trigger 5.3.1 Switch Sonos ON at Time After 18:45 When Alarm Is Switched OFF
8412020-10-30 11:14:15 INFO (MainThread) [homeassistant.components.automation.6_0_0_switch_input_boolean_wc_boven_to_on] Initialized trigger 6.0.0 Switch Input_Boolean WC Boven To On
8422020-10-30 11:14:15 INFO (MainThread) [homeassistant.components.automation.6_0_1_turn_off_input_boolean_wc_boven_10_minutes_after_trigger] Initialized trigger 6.0.1 Turn off Input_Boolean WC Boven 10 minutes after trigger
8432020-10-30 11:14:15 INFO (MainThread) [homeassistant.components.automation.6_1_0_start_timer_after_intercom_ringing] Initialized trigger 6.1.0 Start Timer After Intercom Ringing
8442020-10-30 11:14:15 INFO (MainThread) [homeassistant.components.automation.6_1_1_switch_input_boolean_back_to_off_after_intercom_ringing] Initialized trigger 6.1.1 Switch Input_Boolean Back to Off After Intercom Ringing
8452020-10-30 11:14:15 INFO (MainThread) [homeassistant.components.automation.6_2_0_switch_input_boolean_beneden_niemand_aanwezig_iedereen_slaapt_back_to_default] Initialized trigger 6.2.0 Switch Input_Boolean Beneden Niemand Aanwezig Iedereen Slaapt Back to Default
8462020-10-30 11:14:15 INFO (MainThread) [homeassistant.components.automation.6_2_1_switch_input_boolean_en_timer_to_delay_switch_beneden_off] Initialized trigger 6.2.1 Switch Input_Boolean en Timer to Delay Switch Beneden Off
8472020-10-30 11:14:15 INFO (MainThread) [homeassistant.components.automation.6_2_2_switch_input_boolean_to_on_as_timer_run_off_as_no_one_is_beneden] Initialized trigger 6.2.2 Switch Input_Boolean to On As Timer run off as no one is beneden
8482020-10-30 11:14:15 INFO (MainThread) [homeassistant.components.automation.6_3_0_switch_to_off_input_boolean_en_restart_timer_to_delay_switch_tv_als_niemand_in_woonkamer] Initialized trigger 6.3.0 Switch to Off Input_Boolean en Restart Timer to Delay Switch TV Als niemand in woonkamer
8492020-10-30 11:14:15 INFO (MainThread) [homeassistant.components.automation.6_3_1_switch_input_boolean_tv_off_niemand_in_woonkamer_to_on_as_timer_run_off_as_no_one_is_in_the_woonkamer] Initialized trigger 6.3.1 Switch Input_Boolean TV Off Niemand In woonkamer to On As Timer run off as no one is in the woonkamer
8502020-10-30 11:14:15 INFO (MainThread) [homeassistant.components.automation.6_3_2_switch_input_boolean_tv_uit_als_niemand_in_woonkamer_back_to_default] Initialized trigger 6.3.2 Switch Input_Boolean TV Uit ALs Niemand In woonkamer Back to Default
8512020-10-30 11:14:15 INFO (MainThread) [homeassistant.components.automation.6_4_0_switch_input_boolean_to_on_if_lux_inside_is_high] Initialized trigger 6.4.0 Switch Input Boolean to On if Lux Inside is High.
8522020-10-30 11:14:15 INFO (MainThread) [homeassistant.components.automation.6_4_1_switch_input_boolean_to_off_if_lux_inside_is_low] Initialized trigger 6.4.1 Switch Input Boolean to Off if Lux Inside is Low.
8532020-10-30 11:14:15 INFO (MainThread) [homeassistant.components.automation.6_5_0_kamer_valentijn_switch_input_boolean_en_timer_to_delay_to_off] Initialized trigger 6.5.0 Kamer Valentijn Switch Input_Boolean en Timer to Delay to Off
8542020-10-30 11:14:15 INFO (MainThread) [homeassistant.components.automation.6_5_1_kamer_valentijn_switch_input_boolean_to_on_as_timer_run_off_as_no_one_is_in_kamer_valentijn] Initialized trigger 6.5.1 Kamer Valentijn Switch Input_Boolean to On As Timer run off as no one is in kamer Valentijn
8552020-10-30 11:14:15 INFO (MainThread) [homeassistant.components.automation.6_6_0_kamer_friso_switch_input_boolean_en_timer_to_delay_to_off] Initialized trigger 6.6.0 Kamer Friso Switch Input_Boolean en Timer to Delay to Off
8562020-10-30 11:14:15 INFO (MainThread) [homeassistant.components.automation.6_6_1_kamer_friso_switch_input_boolean_to_on_as_timer_run_off_as_no_one_is_in_kamer_friso] Initialized trigger 6.6.1 Kamer Friso Switch Input_Boolean to On As Timer run off as no one is in kamer Friso
8572020-10-30 11:14:15 INFO (MainThread) [homeassistant.components.automation.6_7_0_kamer_m_m_switch_input_boolean_en_timer_to_delay_to_off] Initialized trigger 6.7.0 Kamer M&M Switch Input_Boolean en Timer to Delay to Off
8582020-10-30 11:14:15 INFO (MainThread) [homeassistant.components.automation.6_7_1_kamer_m_m_switch_input_boolean_to_on_as_timer_run_off_as_no_one_is_in_kamer_m_m] Initialized trigger 6.7.1 Kamer M&M Switch Input_Boolean to On As Timer run off as no one is in kamer M&M
8592020-10-30 11:14:15 INFO (MainThread) [homeassistant.components.automation.6_8_0_heal_z_wave_network] Initialized trigger 6.8.0 Heal Z-Wave Network
8602020-10-30 11:14:15 INFO (MainThread) [homeassistant.components.automation.6_9_0_gang_boven_switch_input_boolean_en_timer_to_delay_to_off] Initialized trigger 6.9.0 Gang Boven Switch Input_Boolean en Timer to Delay to Off
8612020-10-30 11:14:15 INFO (MainThread) [homeassistant.components.automation.6_9_1_gang_boven_switch_input_boolean_to_on_as_timer_run_off_as_no_one_is_in_gang_boven] Initialized trigger 6.9.1 Gang Boven Switch Input_Boolean to On As Timer run off as no one is in Gang Boven
8622020-10-30 11:14:15 INFO (MainThread) [homeassistant.components.automation.7_0_0_washing_machine_washing_state] Initialized trigger 7.0.0 Washing Machine - washing state
8632020-10-30 11:14:15 INFO (MainThread) [homeassistant.components.automation.7_0_1_washing_machine_ready_state] Initialized trigger 7.0.1 Washing Machine - ready state
8642020-10-30 11:14:15 INFO (MainThread) [homeassistant.components.automation.notification_washing_machine] Initialized trigger Notification - washing machine
8652020-10-30 11:14:15 INFO (MainThread) [homeassistant.components.automation.8_0_0_check_if_shower_is_used_via_hydrofoor_and_light_bathroom_switched_on] Initialized trigger 8.0.0 Check If Shower Is Used Via Hydrofoor And Light Bathroom Switched ON
8662020-10-30 11:14:15 INFO (MainThread) [homeassistant.components.automation.8_0_1_switch_off_input_boolean_shower_on_hydrofoor_if_shower_is_not_longer_used] Initialized trigger 8.0.1 Switch Off input_boolean.shower_on_hydrofoor If Shower Is not Longer Used
8672020-10-30 11:14:15 INFO (MainThread) [homeassistant.components.automation.8_0_2_switch_on_spiegelverwarming_if_input_boolean_shower_on_hydrofoor_is_on] Initialized trigger 8.0.2 Switch On Spiegelverwarming if input_boolean.shower_on_hydrofoor is ON
8682020-10-30 11:14:15 INFO (MainThread) [homeassistant.components.automation.8_0_3_switch_off_spiegelverwarming_if_input_boolean_shower_on_hydrofoor_is_off_for_30_min] Initialized trigger 8.0.3 Switch Off Spiegelverwarming if input_boolean.shower_on_hydrofoor is OFF for 30 min
8692020-10-30 11:14:15 INFO (MainThread) [homeassistant.components.automation.8_0_4_switch_off_spiegelverwarming_if_power_usage_if_0_watt_for_30_min] Initialized trigger 8.0.4 Switch Off Spiegelverwarming if Power Usage if 0 Watt for 30 min
8702020-10-30 11:14:15 INFO (MainThread) [homeassistant.components.automation.frontend_turn_on_dark_mode] Initialized trigger Frontend: turn on dark mode
8712020-10-30 11:14:15 INFO (MainThread) [homeassistant.components.automation.frontend_turn_on_light_mode] Initialized trigger Frontend: turn on light mode
8722020-10-30 11:14:15 INFO (MainThread) [homeassistant.components.automation.frontend_change_theme] Frontend: change theme: Running automation actions
8732020-10-30 11:14:15 INFO (MainThread) [homeassistant.components.automation.frontend_change_theme] Frontend: change theme: Executing step call service
8742020-10-30 11:14:15 INFO (MainThread) [homeassistant.components.automation.frontend_change_theme] Initialized trigger Frontend: change theme
8752020-10-30 11:14:16 INFO (SyncWorker_48) [homeassistant.loader] Loaded kodi from homeassistant.components.kodi
8762020-10-30 11:14:16 INFO (SyncWorker_33) [homeassistant.loader] Loaded daikin from homeassistant.components.daikin
8772020-10-30 11:14:16 INFO (MainThread) [custom_components.visonic.pyvisonic] [data receiver] *** Received validated message 0X2 ***
8782020-10-30 11:14:16 INFO (MainThread) [custom_components.visonic.pyvisonic] [data receiver] *** Received validated message 0X3F ***
8792020-10-30 11:14:16 INFO (MainThread) [homeassistant.components.automation.1_11_1_switch_light_lichtbalk_wc_boven_off_when_licht_wc_boven_is_switched_off] 1.11.1 switch_light_lichtbalk_wc_boven_off_when_licht_wc_boven_is_switched_off: Running automation actions
8802020-10-30 11:14:16 INFO (MainThread) [homeassistant.components.automation.1_11_1_switch_light_lichtbalk_wc_boven_off_when_licht_wc_boven_is_switched_off] 1.11.1 switch_light_lichtbalk_wc_boven_off_when_licht_wc_boven_is_switched_off: Executing step call service
8812020-10-30 11:14:16 INFO (MainThread) [homeassistant.components.automation.1_4_1_switch_light_wastafel_off_if_badkamer_light_is_switched_off] 1.4.1 Switch Light Wastafel Off if Badkamer Light is Switched Off: Running automation actions
8822020-10-30 11:14:16 INFO (MainThread) [homeassistant.components.automation.1_4_1_switch_light_wastafel_off_if_badkamer_light_is_switched_off] 1.4.1 Switch Light Wastafel Off if Badkamer Light is Switched Off: Executing step call service
8832020-10-30 11:14:16 DEBUG (MainThread) [xknx.knx] Sending: <KNXIPFrame <KNXIPHeader HeaderLength="6" ProtocolVersion="16" KNXIPServiceType="KNXIPServiceType.CONNECTIONSTATE_REQUEST" Reserve="0" TotalLength="16" />
884 body="<ConnectionStateRequest CommunicationChannelID="17", control_endpoint="<HPAI 10.58.60.89:35606 />" />" />
8852020-10-30 11:14:17 DEBUG (MainThread) [xknx.raw_socket] Received from ('10.58.60.11', 3671): 0610020800081100
8862020-10-30 11:14:17 DEBUG (MainThread) [xknx.knx] Received: <KNXIPFrame <KNXIPHeader HeaderLength="6" ProtocolVersion="16" KNXIPServiceType="KNXIPServiceType.CONNECTIONSTATE_RESPONSE" Reserve="0" TotalLength="8" />
887 body="<ConnectionStateResponse CommunicationChannelID="17" status_code="ErrorCode.E_NO_ERROR" />" />
8882020-10-30 11:14:17 INFO (MainThread) [homeassistant.components.frontend] Theme ios-light-mode-blue-red set as default light theme
8892020-10-30 11:14:18 DEBUG (MainThread) [xknx.raw_socket] Received from ('10.58.60.11', 3671): 061004200017041126002900bce0110328010300801c92
8902020-10-30 11:14:18 DEBUG (MainThread) [xknx.knx] Received: <KNXIPFrame <KNXIPHeader HeaderLength="6" ProtocolVersion="16" KNXIPServiceType="KNXIPServiceType.TUNNELLING_REQUEST" Reserve="0" TotalLength="23" />
891 body="<TunnellingRequest communication_channel_id="17" sequence_counter="38" cemi="<CEMIFrame SourceAddress="PhysicalAddress("1.1.3")" DestinationAddress="GroupAddress("5/0/1")" Flags="1011110011100000" Command="APCICommand.GROUP_WRITE" payload="<DPTArray value="[0x1c,0x92]" />" />" />" />
8922020-10-30 11:14:18 DEBUG (MainThread) [xknx.knx] Sending: <KNXIPFrame <KNXIPHeader HeaderLength="6" ProtocolVersion="16" KNXIPServiceType="KNXIPServiceType.TUNNELLING_ACK" Reserve="0" TotalLength="10" />
893 body="<TunnellingAck communication_channel_id="17" sequence_counter="38" status_code="ErrorCode.E_NO_ERROR" />" />
8942020-10-30 11:14:18 INFO (MainThread) [custom_components.visonic.pyvisonic] [data receiver] *** Received validated message 0X2 ***
8952020-10-30 11:14:18 INFO (MainThread) [custom_components.visonic.pyvisonic] [data receiver] *** Received validated message 0X3F ***
8962020-10-30 11:14:18 DEBUG (MainThread) [xknx.telegram] <Telegram group_address="GroupAddress("5/0/1")", payload="<DPTArray value="[0x1c,0x92]" />" telegramtype="TelegramType.GROUP_WRITE" direction="TelegramDirection.INCOMING" />
8972020-10-30 11:14:22 DEBUG (MainThread) [xknx.raw_socket] Received from ('10.58.60.11', 3671): 061004200017041127002900bce01109280a0300801d44
8982020-10-30 11:14:22 DEBUG (MainThread) [xknx.knx] Received: <KNXIPFrame <KNXIPHeader HeaderLength="6" ProtocolVersion="16" KNXIPServiceType="KNXIPServiceType.TUNNELLING_REQUEST" Reserve="0" TotalLength="23" />
899 body="<TunnellingRequest communication_channel_id="17" sequence_counter="39" cemi="<CEMIFrame SourceAddress="PhysicalAddress("1.1.9")" DestinationAddress="GroupAddress("5/0/10")" Flags="1011110011100000" Command="APCICommand.GROUP_WRITE" payload="<DPTArray value="[0x1d,0x44]" />" />" />" />
9002020-10-30 11:14:22 DEBUG (MainThread) [xknx.knx] Sending: <KNXIPFrame <KNXIPHeader HeaderLength="6" ProtocolVersion="16" KNXIPServiceType="KNXIPServiceType.TUNNELLING_ACK" Reserve="0" TotalLength="10" />
901 body="<TunnellingAck communication_channel_id="17" sequence_counter="39" status_code="ErrorCode.E_NO_ERROR" />" />
9022020-10-30 11:14:22 DEBUG (MainThread) [xknx.telegram] <Telegram group_address="GroupAddress("1/1/1")", payload="<DPTBinary value="False" />" telegramtype="TelegramType.GROUP_WRITE" direction="TelegramDirection.OUTGOING" />
9032020-10-30 11:14:22 DEBUG (MainThread) [xknx.knx] Sending: <KNXIPFrame <KNXIPHeader HeaderLength="6" ProtocolVersion="16" KNXIPServiceType="KNXIPServiceType.TUNNELLING_REQUEST" Reserve="0" TotalLength="21" />
904 body="<TunnellingRequest communication_channel_id="17" sequence_counter="19" cemi="<CEMIFrame SourceAddress="PhysicalAddress("15.15.242")" DestinationAddress="GroupAddress("1/1/1")" Flags="1011110011100000" Command="APCICommand.GROUP_WRITE" payload="<DPTBinary value="False" />" />" />" />
9052020-10-30 11:14:22 INFO (SyncWorker_13) [homeassistant.loader] Loaded spotify from homeassistant.components.spotify
9062020-10-30 11:14:22 INFO (SyncWorker_4) [homeassistant.loader] Loaded brother from homeassistant.components.brother
9072020-10-30 11:14:22 INFO (MainThread) [homeassistant.components.automation.6_4_1_switch_input_boolean_to_off_if_lux_inside_is_low] 6.4.1 Switch Input Boolean to Off if Lux Inside is Low.: Running automation actions
9082020-10-30 11:14:22 INFO (MainThread) [homeassistant.components.automation.6_4_1_switch_input_boolean_to_off_if_lux_inside_is_low] 6.4.1 Switch Input Boolean to Off if Lux Inside is Low.: Executing step call service
9092020-10-30 11:14:22 DEBUG (MainThread) [xknx.telegram] <Telegram group_address="GroupAddress("5/0/10")", payload="<DPTArray value="[0x1d,0x44]" />" telegramtype="TelegramType.GROUP_WRITE" direction="TelegramDirection.INCOMING" />
9102020-10-30 11:14:22 WARNING (MainThread) [homeassistant.components.binary_sensor] Updating ping binary_sensor took longer than the scheduled update interval 0:00:05
9112020-10-30 11:14:22 DEBUG (MainThread) [xknx.raw_socket] Received from ('10.58.60.11', 3671): 061004200017041127002900bce01109280a0300801d44
9122020-10-30 11:14:22 DEBUG (MainThread) [xknx.knx] Received: <KNXIPFrame <KNXIPHeader HeaderLength="6" ProtocolVersion="16" KNXIPServiceType="KNXIPServiceType.TUNNELLING_REQUEST" Reserve="0" TotalLength="23" />
913 body="<TunnellingRequest communication_channel_id="17" sequence_counter="39" cemi="<CEMIFrame SourceAddress="PhysicalAddress("1.1.9")" DestinationAddress="GroupAddress("5/0/10")" Flags="1011110011100000" Command="APCICommand.GROUP_WRITE" payload="<DPTArray value="[0x1d,0x44]" />" />" />" />
9142020-10-30 11:14:22 DEBUG (MainThread) [xknx.knx] Sending: <KNXIPFrame <KNXIPHeader HeaderLength="6" ProtocolVersion="16" KNXIPServiceType="KNXIPServiceType.TUNNELLING_ACK" Reserve="0" TotalLength="10" />
915 body="<TunnellingAck communication_channel_id="17" sequence_counter="39" status_code="ErrorCode.E_NO_ERROR" />" />
9162020-10-30 11:14:22 INFO (MainThread) [custom_components.visonic.pyvisonic] [data receiver] *** Received validated message 0X2 ***
9172020-10-30 11:14:22 INFO (MainThread) [custom_components.visonic.pyvisonic] [data receiver] *** Received validated message 0X3F ***
9182020-10-30 11:14:22 DEBUG (MainThread) [xknx.telegram] <Telegram group_address="GroupAddress("5/0/10")", payload="<DPTArray value="[0x1d,0x44]" />" telegramtype="TelegramType.GROUP_WRITE" direction="TelegramDirection.INCOMING" />
9192020-10-30 11:14:22 DEBUG (MainThread) [xknx.raw_socket] Received from ('10.58.60.11', 3671): 06100421000a04111300
9202020-10-30 11:14:22 DEBUG (MainThread) [xknx.knx] Received: <KNXIPFrame <KNXIPHeader HeaderLength="6" ProtocolVersion="16" KNXIPServiceType="KNXIPServiceType.TUNNELLING_ACK" Reserve="0" TotalLength="10" />
921 body="<TunnellingAck communication_channel_id="17" sequence_counter="19" status_code="ErrorCode.E_NO_ERROR" />" />
9222020-10-30 11:14:22 DEBUG (MainThread) [xknx.raw_socket] Received from ('10.58.60.11', 3671): 061004200015041128002e00bce0fff20901010080
9232020-10-30 11:14:22 DEBUG (MainThread) [xknx.knx] Received: <KNXIPFrame <KNXIPHeader HeaderLength="6" ProtocolVersion="16" KNXIPServiceType="KNXIPServiceType.TUNNELLING_REQUEST" Reserve="0" TotalLength="21" />
924 body="<TunnellingRequest communication_channel_id="17" sequence_counter="40" cemi="<CEMIFrame SourceAddress="PhysicalAddress("15.15.242")" DestinationAddress="GroupAddress("1/1/1")" Flags="1011110011100000" Command="APCICommand.GROUP_WRITE" payload="<DPTBinary value="0" />" />" />" />
9252020-10-30 11:14:22 DEBUG (MainThread) [xknx.knx] Sending: <KNXIPFrame <KNXIPHeader HeaderLength="6" ProtocolVersion="16" KNXIPServiceType="KNXIPServiceType.TUNNELLING_ACK" Reserve="0" TotalLength="10" />
926 body="<TunnellingAck communication_channel_id="17" sequence_counter="40" status_code="ErrorCode.E_NO_ERROR" />" />
9272020-10-30 11:14:22 INFO (MainThread) [homeassistant.components.automation.1_11_1_switch_light_lichtbalk_wc_boven_off_when_licht_wc_boven_is_switched_off] 1.11.1 switch_light_lichtbalk_wc_boven_off_when_licht_wc_boven_is_switched_off: Executing step call service
9282020-10-30 11:14:22 INFO (MainThread) [homeassistant.components.automation.1_4_1_switch_light_wastafel_off_if_badkamer_light_is_switched_off] 1.4.1 Switch Light Wastafel Off if Badkamer Light is Switched Off: Executing step call service
9292020-10-30 11:14:22 INFO (MainThread) [custom_components.visonic.pyvisonic] [data receiver] *** Received validated message 0X2 ***
9302020-10-30 11:14:22 INFO (MainThread) [custom_components.visonic.pyvisonic] [data receiver] *** Received validated message 0X3F ***
9312020-10-30 11:14:23 INFO (MainThread) [homeassistant.components.automation.4_1_0_sync_state_switch_tv_front_end_with_reality] 4.1.0 Sync state switch tv front-end with reality: Running automation actions
9322020-10-30 11:14:23 INFO (MainThread) [homeassistant.components.automation.4_1_0_sync_state_switch_tv_front_end_with_reality] 4.1.0 Sync state switch tv front-end with reality: Executing step call service
9332020-10-30 11:14:28 DEBUG (MainThread) [xknx.telegram] <Telegram group_address="GroupAddress("1/1/2")", payload="<DPTBinary value="False" />" telegramtype="TelegramType.GROUP_WRITE" direction="TelegramDirection.OUTGOING" />
9342020-10-30 11:14:28 DEBUG (MainThread) [xknx.knx] Sending: <KNXIPFrame <KNXIPHeader HeaderLength="6" ProtocolVersion="16" KNXIPServiceType="KNXIPServiceType.TUNNELLING_REQUEST" Reserve="0" TotalLength="21" />
935 body="<TunnellingRequest communication_channel_id="17" sequence_counter="20" cemi="<CEMIFrame SourceAddress="PhysicalAddress("15.15.242")" DestinationAddress="GroupAddress("1/1/2")" Flags="1011110011100000" Command="APCICommand.GROUP_WRITE" payload="<DPTBinary value="False" />" />" />" />
9362020-10-30 11:14:28 WARNING (MainThread) [homeassistant.components.system_log.external] 1.11.1 The state of light.wc_boven_main Level light.fibaro_system_fgd211_universal_dimmer_500w_level_2 changed from unavailable to off
9372020-10-30 11:14:28 WARNING (MainThread) [homeassistant.components.system_log.external] 1.4.1 The state of light.badkamer_main Level light.fibaro_system_fgd211_universal_dimmer_500w_level_7 changed from unavailable to off
9382020-10-30 11:14:29 INFO (MainThread) [custom_components.hacs] Loading known repositories
9392020-10-30 11:14:29 INFO (MainThread) [custom_components.visonic.pyvisonic] [data receiver] *** Received validated message 0X3F ***
9402020-10-30 11:14:29 DEBUG (MainThread) [xknx.raw_socket] Received from ('10.58.60.11', 3671): 06100421000a04111400
9412020-10-30 11:14:29 DEBUG (MainThread) [xknx.knx] Received: <KNXIPFrame <KNXIPHeader HeaderLength="6" ProtocolVersion="16" KNXIPServiceType="KNXIPServiceType.TUNNELLING_ACK" Reserve="0" TotalLength="10" />
942 body="<TunnellingAck communication_channel_id="17" sequence_counter="20" status_code="ErrorCode.E_NO_ERROR" />" />
9432020-10-30 11:14:29 INFO (MainThread) [homeassistant.components.system_log.external] 4.1.0 The state of Ping 10.58.60.16 binary_sensor.ping_10_58_60_16 changed from on to on
9442020-10-30 11:14:29 DEBUG (MainThread) [xknx.raw_socket] Received from ('10.58.60.11', 3671): 061004200015041129002e00bce0fff20902010080
9452020-10-30 11:14:29 DEBUG (MainThread) [xknx.knx] Received: <KNXIPFrame <KNXIPHeader HeaderLength="6" ProtocolVersion="16" KNXIPServiceType="KNXIPServiceType.TUNNELLING_REQUEST" Reserve="0" TotalLength="21" />
946 body="<TunnellingRequest communication_channel_id="17" sequence_counter="41" cemi="<CEMIFrame SourceAddress="PhysicalAddress("15.15.242")" DestinationAddress="GroupAddress("1/1/2")" Flags="1011110011100000" Command="APCICommand.GROUP_WRITE" payload="<DPTBinary value="0" />" />" />" />
9472020-10-30 11:14:29 DEBUG (MainThread) [xknx.knx] Sending: <KNXIPFrame <KNXIPHeader HeaderLength="6" ProtocolVersion="16" KNXIPServiceType="KNXIPServiceType.TUNNELLING_ACK" Reserve="0" TotalLength="10" />
948 body="<TunnellingAck communication_channel_id="17" sequence_counter="41" status_code="ErrorCode.E_NO_ERROR" />" />
9492020-10-30 11:14:29 INFO (MainThread) [homeassistant.components.automation.4_1_0_sync_state_switch_tv_front_end_with_reality] 4.1.0 Sync state switch tv front-end with reality: Executing step call service
9502020-10-30 11:14:29 INFO (MainThread) [homeassistant.components.automation.6_4_1_switch_input_boolean_to_off_if_lux_inside_is_low] 6.4.1 Switch Input Boolean to Off if Lux Inside is Low.: Executing step call service
9512020-10-30 11:14:29 WARNING (MainThread) [homeassistant.components.system_log.external] The state of Slaapkamer Valentijn Lux sensor.slaapkamer_valentijn_lux moved to 93.6
9522020-10-30 11:14:29 INFO (MainThread) [custom_components.visonic.pyvisonic] [data receiver] *** Received validated message 0X2 ***
9532020-10-30 11:14:29 INFO (SyncWorker_35) [homeassistant.loader] Loaded samsungtv from homeassistant.components.samsungtv
9542020-10-30 11:14:29 INFO (SyncWorker_16) [homeassistant.components.python_script] Executing set_state.py: {'entity_id': 'switch.tv_toggle', 'state': 'on'}
9552020-10-30 11:14:29 INFO (SyncWorker_16) [homeassistant.components.python_script.set_state.py] switch.tv_toggle: state> on
9562020-10-30 11:14:30 INFO (MainThread) [custom_components.visonic.pyvisonic] [data receiver] *** Received validated message 0X3F ***
9572020-10-30 11:14:32 WARNING (MainThread) [homeassistant.components.automation.4_1_0_sync_state_switch_tv_front_end_with_reality] 4.1.0 Sync state switch tv front-end with reality: Already running
9582020-10-30 11:14:32 INFO (MainThread) [custom_components.visonic.pyvisonic] [data receiver] *** Received validated message 0X2 ***
9592020-10-30 11:14:32 INFO (MainThread) [custom_components.visonic.pyvisonic] [data receiver] *** Received validated message 0X3F ***
9602020-10-30 11:14:33 DEBUG (MainThread) [xknx.knx] Sending: <KNXIPFrame <KNXIPHeader HeaderLength="6" ProtocolVersion="16" KNXIPServiceType="KNXIPServiceType.CONNECTIONSTATE_REQUEST" Reserve="0" TotalLength="16" />
961 body="<ConnectionStateRequest CommunicationChannelID="17", control_endpoint="<HPAI 10.58.60.89:35606 />" />" />
9622020-10-30 11:14:33 DEBUG (MainThread) [xknx.raw_socket] Received from ('10.58.60.11', 3671): 0610020800081100
9632020-10-30 11:14:33 DEBUG (MainThread) [xknx.knx] Received: <KNXIPFrame <KNXIPHeader HeaderLength="6" ProtocolVersion="16" KNXIPServiceType="KNXIPServiceType.CONNECTIONSTATE_RESPONSE" Reserve="0" TotalLength="8" />
964 body="<ConnectionStateResponse CommunicationChannelID="17" status_code="ErrorCode.E_NO_ERROR" />" />
9652020-10-30 11:14:33 INFO (MainThread) [custom_components.visonic.pyvisonic] [data receiver] *** Received validated message 0X2 ***
9662020-10-30 11:14:34 INFO (MainThread) [custom_components.visonic.pyvisonic] [data receiver] *** Received validated message 0X3F ***
9672020-10-30 11:14:34 INFO (MainThread) [custom_components.visonic.pyvisonic] [data receiver] *** Received validated message 0X2 ***
9682020-10-30 11:14:34 INFO (MainThread) [custom_components.visonic.pyvisonic] [data receiver] *** Received validated message 0X3F ***
9692020-10-30 11:14:35 INFO (MainThread) [custom_components.visonic.pyvisonic] [data receiver] *** Received validated message 0X2 ***
9702020-10-30 11:14:35 INFO (MainThread) [custom_components.visonic.pyvisonic] [data receiver] *** Received validated message 0X3F ***
9712020-10-30 11:14:35 DEBUG (MainThread) [xknx.raw_socket] Received from ('10.58.60.11', 3671): 06100420001704112a002900bce0110728040300800c15
9722020-10-30 11:14:35 DEBUG (MainThread) [xknx.knx] Received: <KNXIPFrame <KNXIPHeader HeaderLength="6" ProtocolVersion="16" KNXIPServiceType="KNXIPServiceType.TUNNELLING_REQUEST" Reserve="0" TotalLength="23" />
973 body="<TunnellingRequest communication_channel_id="17" sequence_counter="42" cemi="<CEMIFrame SourceAddress="PhysicalAddress("1.1.7")" DestinationAddress="GroupAddress("5/0/4")" Flags="1011110011100000" Command="APCICommand.GROUP_WRITE" payload="<DPTArray value="[0xc,0x15]" />" />" />" />
9742020-10-30 11:14:35 DEBUG (MainThread) [xknx.knx] Sending: <KNXIPFrame <KNXIPHeader HeaderLength="6" ProtocolVersion="16" KNXIPServiceType="KNXIPServiceType.TUNNELLING_ACK" Reserve="0" TotalLength="10" />
975 body="<TunnellingAck communication_channel_id="17" sequence_counter="42" status_code="ErrorCode.E_NO_ERROR" />" />
9762020-10-30 11:14:35 DEBUG (MainThread) [xknx.telegram] <Telegram group_address="GroupAddress("5/0/4")", payload="<DPTArray value="[0xc,0x15]" />" telegramtype="TelegramType.GROUP_WRITE" direction="TelegramDirection.INCOMING" />
9772020-10-30 11:14:35 INFO (MainThread) [homeassistant.components.automation.4_1_0_sync_state_switch_tv_front_end_with_reality] 4.1.0 Sync state switch tv front-end with reality: Running automation actions
9782020-10-30 11:14:35 INFO (MainThread) [homeassistant.components.automation.4_1_0_sync_state_switch_tv_front_end_with_reality] 4.1.0 Sync state switch tv front-end with reality: Executing step call service
9792020-10-30 11:14:35 INFO (MainThread) [homeassistant.components.system_log.external] 4.1.0 The state of Ping 10.58.60.16 binary_sensor.ping_10_58_60_16 changed from on to on
9802020-10-30 11:14:35 INFO (MainThread) [homeassistant.components.automation.4_1_0_sync_state_switch_tv_front_end_with_reality] 4.1.0 Sync state switch tv front-end with reality: Executing step call service
9812020-10-30 11:14:35 INFO (MainThread) [custom_components.visonic.pyvisonic] [data receiver] *** Received validated message 0X2 ***
9822020-10-30 11:14:35 INFO (SyncWorker_40) [homeassistant.components.python_script] Executing set_state.py: {'entity_id': 'switch.tv_toggle', 'state': 'on'}
9832020-10-30 11:14:35 INFO (SyncWorker_40) [homeassistant.components.python_script.set_state.py] switch.tv_toggle: state> on
9842020-10-30 11:14:36 INFO (MainThread) [custom_components.visonic.pyvisonic] [data receiver] *** Received validated message 0X3F ***
9852020-10-30 11:14:36 INFO (MainThread) [custom_components.visonic.pyvisonic] [data receiver] *** Received validated message 0X2 ***
9862020-10-30 11:14:36 INFO (MainThread) [custom_components.visonic.pyvisonic] [data receiver] *** Received validated message 0X3F ***
9872020-10-30 11:14:37 INFO (MainThread) [custom_components.visonic.pyvisonic] [data receiver] *** Received validated message 0X2 ***
9882020-10-30 11:14:37 INFO (MainThread) [custom_components.visonic.pyvisonic] [data receiver] *** Received validated message 0X3F ***
9892020-10-30 11:14:37 INFO (MainThread) [custom_components.visonic.pyvisonic] [data receiver] *** Received validated message 0X2 ***
9902020-10-30 11:14:37 INFO (MainThread) [custom_components.visonic.pyvisonic] [data receiver] *** Received validated message 0X3F ***
9912020-10-30 11:14:37 DEBUG (MainThread) [xknx.raw_socket] Received from ('10.58.60.11', 3671): 06100420001704112b002900bce0110828090300800744
9922020-10-30 11:14:37 DEBUG (MainThread) [xknx.knx] Received: <KNXIPFrame <KNXIPHeader HeaderLength="6" ProtocolVersion="16" KNXIPServiceType="KNXIPServiceType.TUNNELLING_REQUEST" Reserve="0" TotalLength="23" />
993 body="<TunnellingRequest communication_channel_id="17" sequence_counter="43" cemi="<CEMIFrame SourceAddress="PhysicalAddress("1.1.8")" DestinationAddress="GroupAddress("5/0/9")" Flags="1011110011100000" Command="APCICommand.GROUP_WRITE" payload="<DPTArray value="[0x7,0x44]" />" />" />" />
9942020-10-30 11:14:37 DEBUG (MainThread) [xknx.knx] Sending: <KNXIPFrame <KNXIPHeader HeaderLength="6" ProtocolVersion="16" KNXIPServiceType="KNXIPServiceType.TUNNELLING_ACK" Reserve="0" TotalLength="10" />
995 body="<TunnellingAck communication_channel_id="17" sequence_counter="43" status_code="ErrorCode.E_NO_ERROR" />" />
9962020-10-30 11:14:37 DEBUG (MainThread) [xknx.telegram] <Telegram group_address="GroupAddress("5/0/9")", payload="<DPTArray value="[0x7,0x44]" />" telegramtype="TelegramType.GROUP_WRITE" direction="TelegramDirection.INCOMING" />
9972020-10-30 11:14:37 INFO (MainThread) [custom_components.visonic.pyvisonic] [data receiver] *** Received validated message 0X2 ***
9982020-10-30 11:14:38 INFO (MainThread) [custom_components.visonic.pyvisonic] [data receiver] *** Received validated message 0X3F ***
9992020-10-30 11:14:38 INFO (MainThread) [custom_components.visonic.pyvisonic] [data receiver] *** Received validated message 0X2 ***
10002020-10-30 11:14:38 INFO (MainThread) [custom_components.visonic.pyvisonic] [data receiver] *** Received validated message 0X3F ***
10012020-10-30 11:14:38 INFO (MainThread) [custom_components.visonic.pyvisonic] [data receiver] *** Received validated message 0X2 ***
10022020-10-30 11:14:38 INFO (MainThread) [custom_components.visonic.pyvisonic] [data receiver] *** Received validated message 0X3F ***
10032020-10-30 11:14:38 INFO (MainThread) [custom_components.visonic.pyvisonic] [handle_msgtype3F] We're almost in powerlink mode *****************************************
10042020-10-30 11:14:38 INFO (MainThread) [custom_components.visonic.pyvisonic] [Process Settings] Process Settings from EPROM
10052020-10-30 11:14:38 INFO (MainThread) [custom_components.visonic.pyvisonic] [Process Settings] pmPanelTypeNr 2 (2)    model PowerMax Pro
10062020-10-30 11:14:38 INFO (MainThread) [custom_components.visonic.pyvisonic] [Process Settings] Ready for use
10072020-10-30 11:14:38 INFO (MainThread) [custom_components.visonic.pyvisonic] =============================================== Display Status ===============================================
10082020-10-30 11:14:38 INFO (MainThread) [custom_components.visonic.pyvisonic]      key 0  Sensor id=1  dname=Z01  stype=Magnet   zname=Front door     ztypeName=Delay 1    ztamper=0  ztrip=0  bypass=0  lowbatt=0  status=0  tamper=0  enrolled=1  triggered=0 
10092020-10-30 11:14:38 INFO (MainThread) [custom_components.visonic.pyvisonic]      key 1  Sensor id=2  dname=Z02  stype=Motion   zname=Hall           ztypeName=Delay 1    ztamper=0  ztrip=0  bypass=0  lowbatt=0  status=0  tamper=0  enrolled=1  triggered=0 
10102020-10-30 11:14:38 INFO (MainThread) [custom_components.visonic.pyvisonic]      key 2  Sensor id=3  dname=Z03  stype=Motion   zname=Dining room    ztypeName=Perimeter  ztamper=0  ztrip=0  bypass=0  lowbatt=0  status=0  tamper=0  enrolled=1  triggered=0 
10112020-10-30 11:14:38 INFO (MainThread) [custom_components.visonic.pyvisonic]      key 3  Sensor id=4  dname=Z04  stype=Motion   zname=Living room    ztypeName=Perimeter  ztamper=0  ztrip=0  bypass=0  lowbatt=0  status=0  tamper=0  enrolled=1  triggered=0 
10122020-10-30 11:14:38 INFO (MainThread) [custom_components.visonic.pyvisonic]    Model PowerMax Pro           PowerMaster No                     LastEvent None                   Ready   No           
10132020-10-30 11:14:38 INFO (MainThread) [custom_components.visonic.pyvisonic]    Mode  Download               Status      Unknown                Armed     No                     Trouble None              AlarmStatus None        
10142020-10-30 11:14:38 INFO (MainThread) [custom_components.visonic.pyvisonic] ==============================================================================================================
10152020-10-30 11:14:38 INFO (MainThread) [custom_components.visonic.pyvisonic] [Process Settings] Entering Standard Plus Mode as we got the pin codes from the EPROM
10162020-10-30 11:14:39 INFO (MainThread) [homeassistant.components.binary_sensor] Setting up binary_sensor.visonic
10172020-10-30 11:14:39 DEBUG (MainThread) [xknx.raw_socket] Received from ('10.58.60.11', 3671): 06100420001704112c002900bce0110728050300801cbf
10182020-10-30 11:14:39 DEBUG (MainThread) [xknx.knx] Received: <KNXIPFrame <KNXIPHeader HeaderLength="6" ProtocolVersion="16" KNXIPServiceType="KNXIPServiceType.TUNNELLING_REQUEST" Reserve="0" TotalLength="23" />
1019 body="<TunnellingRequest communication_channel_id="17" sequence_counter="44" cemi="<CEMIFrame SourceAddress="PhysicalAddress("1.1.7")" DestinationAddress="GroupAddress("5/0/5")" Flags="1011110011100000" Command="APCICommand.GROUP_WRITE" payload="<DPTArray value="[0x1c,0xbf]" />" />" />" />
10202020-10-30 11:14:39 DEBUG (MainThread) [xknx.knx] Sending: <KNXIPFrame <KNXIPHeader HeaderLength="6" ProtocolVersion="16" KNXIPServiceType="KNXIPServiceType.TUNNELLING_ACK" Reserve="0" TotalLength="10" />
1021 body="<TunnellingAck communication_channel_id="17" sequence_counter="44" status_code="ErrorCode.E_NO_ERROR" />" />
10222020-10-30 11:14:39 DEBUG (MainThread) [xknx.telegram] <Telegram group_address="GroupAddress("5/0/5")", payload="<DPTArray value="[0x1c,0xbf]" />" telegramtype="TelegramType.GROUP_WRITE" direction="TelegramDirection.INCOMING" />
10232020-10-30 11:14:39 INFO (MainThread) [custom_components.visonic.pyvisonic] [data receiver] *** Received validated message 0X2 ***
10242020-10-30 11:14:39 INFO (MainThread) [custom_components.visonic.pyvisonic] [data receiver] *** Received validated message 0X3F ***
10252020-10-30 11:14:39 INFO (MainThread) [custom_components.visonic.pyvisonic] [handle_msgtype3F] We're almost in powerlink mode *****************************************
10262020-10-30 11:14:39 INFO (MainThread) [custom_components.visonic.pyvisonic] [Process Settings] Process Settings from EPROM
10272020-10-30 11:14:39 INFO (MainThread) [custom_components.visonic.pyvisonic] [Process Settings] pmPanelTypeNr 2 (2)    model PowerMax Pro
10282020-10-30 11:14:39 INFO (MainThread) [custom_components.visonic.pyvisonic] [Process Settings] Ready for use
10292020-10-30 11:14:39 INFO (MainThread) [custom_components.visonic.pyvisonic] =============================================== Display Status ===============================================
10302020-10-30 11:14:39 INFO (MainThread) [custom_components.visonic.pyvisonic]      key 0  Sensor id=1  dname=Z01  stype=Magnet   zname=Front door     ztypeName=Delay 1    ztamper=0  ztrip=0  bypass=0  lowbatt=0  status=0  tamper=0  enrolled=1  triggered=0 
10312020-10-30 11:14:39 INFO (MainThread) [custom_components.visonic.pyvisonic]      key 1  Sensor id=2  dname=Z02  stype=Motion   zname=Hall           ztypeName=Delay 1    ztamper=0  ztrip=0  bypass=0  lowbatt=0  status=0  tamper=0  enrolled=1  triggered=0 
10322020-10-30 11:14:39 INFO (MainThread) [custom_components.visonic.pyvisonic]      key 2  Sensor id=3  dname=Z03  stype=Motion   zname=Dining room    ztypeName=Perimeter  ztamper=0  ztrip=0  bypass=0  lowbatt=0  status=0  tamper=0  enrolled=1  triggered=0 
10332020-10-30 11:14:39 INFO (MainThread) [custom_components.visonic.pyvisonic]      key 3  Sensor id=4  dname=Z04  stype=Motion   zname=Living room    ztypeName=Perimeter  ztamper=0  ztrip=0  bypass=0  lowbatt=0  status=0  tamper=0  enrolled=1  triggered=0 
10342020-10-30 11:14:39 INFO (MainThread) [custom_components.visonic.pyvisonic]    Model PowerMax Pro           PowerMaster No                     LastEvent None                   Ready   No           
10352020-10-30 11:14:39 INFO (MainThread) [custom_components.visonic.pyvisonic]    Mode  Standard Plus          Status      Unknown                Armed     No                     Trouble None              AlarmStatus None        
10362020-10-30 11:14:39 INFO (MainThread) [custom_components.visonic.pyvisonic] ==============================================================================================================
10372020-10-30 11:14:39 INFO (MainThread) [custom_components.visonic.pyvisonic] [Process Settings] Entering Standard Plus Mode as we got the pin codes from the EPROM
10382020-10-30 11:14:39 INFO (MainThread) [custom_components.visonic.pyvisonic] [data receiver] *** Received validated message 0X2 ***
10392020-10-30 11:14:41 INFO (MainThread) [homeassistant.components.automation.4_1_0_sync_state_switch_tv_front_end_with_reality] 4.1.0 Sync state switch tv front-end with reality: Running automation actions
10402020-10-30 11:14:41 INFO (MainThread) [homeassistant.components.automation.4_1_0_sync_state_switch_tv_front_end_with_reality] 4.1.0 Sync state switch tv front-end with reality: Executing step call service
10412020-10-30 11:14:41 INFO (MainThread) [custom_components.visonic.pyvisonic] [data receiver] *** Received validated message 0X2 ***
10422020-10-30 11:14:41 INFO (MainThread) [homeassistant.components.system_log.external] 4.1.0 The state of Ping 10.58.60.16 binary_sensor.ping_10_58_60_16 changed from on to on
10432020-10-30 11:14:41 INFO (MainThread) [homeassistant.components.automation.4_1_0_sync_state_switch_tv_front_end_with_reality] 4.1.0 Sync state switch tv front-end with reality: Executing step call service
10442020-10-30 11:14:41 INFO (SyncWorker_1) [homeassistant.components.python_script] Executing set_state.py: {'entity_id': 'switch.tv_toggle', 'state': 'on'}
10452020-10-30 11:14:41 INFO (SyncWorker_1) [homeassistant.components.python_script.set_state.py] switch.tv_toggle: state> on
10462020-10-30 11:14:41 INFO (MainThread) [custom_components.visonic.pyvisonic] [data receiver] *** Received validated message 0X2 ***
10472020-10-30 11:14:43 INFO (MainThread) [custom_components.visonic.pyvisonic] [data receiver] *** Received validated message 0X2 ***
10482020-10-30 11:14:43 INFO (MainThread) [custom_components.hacs] Stage changed: HacsStage.RUNNING
10492020-10-30 11:14:45 INFO (MainThread) [homeassistant.components.automation.4_1_0_sync_state_switch_tv_front_end_with_reality] 4.1.0 Sync state switch tv front-end with reality: Running automation actions
10502020-10-30 11:14:45 INFO (MainThread) [homeassistant.components.automation.4_1_0_sync_state_switch_tv_front_end_with_reality] 4.1.0 Sync state switch tv front-end with reality: Executing step call service
10512020-10-30 11:14:45 INFO (MainThread) [homeassistant.components.system_log.external] 4.1.0 The state of Ping 10.58.60.16 binary_sensor.ping_10_58_60_16 changed from on to on
10522020-10-30 11:14:45 INFO (MainThread) [homeassistant.components.automation.4_1_0_sync_state_switch_tv_front_end_with_reality] 4.1.0 Sync state switch tv front-end with reality: Executing step call service
10532020-10-30 11:14:45 INFO (SyncWorker_31) [homeassistant.components.python_script] Executing set_state.py: {'entity_id': 'switch.tv_toggle', 'state': 'on'}
10542020-10-30 11:14:45 INFO (SyncWorker_31) [homeassistant.components.python_script.set_state.py] switch.tv_toggle: state> on
10552020-10-30 11:14:49 DEBUG (MainThread) [xknx.knx] Sending: <KNXIPFrame <KNXIPHeader HeaderLength="6" ProtocolVersion="16" KNXIPServiceType="KNXIPServiceType.CONNECTIONSTATE_REQUEST" Reserve="0" TotalLength="16" />
1056 body="<ConnectionStateRequest CommunicationChannelID="17", control_endpoint="<HPAI 10.58.60.89:35606 />" />" />
10572020-10-30 11:14:49 INFO (MainThread) [custom_components.visonic.pyvisonic] [Controller] Trigger Powerlink Prompt attempt to a Powermax+ or Powermax Pro panel
10582020-10-30 11:14:49 DEBUG (MainThread) [xknx.raw_socket] Received from ('10.58.60.11', 3671): 0610020800081100
10592020-10-30 11:14:49 DEBUG (MainThread) [xknx.knx] Received: <KNXIPFrame <KNXIPHeader HeaderLength="6" ProtocolVersion="16" KNXIPServiceType="KNXIPServiceType.CONNECTIONSTATE_RESPONSE" Reserve="0" TotalLength="8" />
1060 body="<ConnectionStateResponse CommunicationChannelID="17" status_code="ErrorCode.E_NO_ERROR" />" />
10612020-10-30 11:14:49 INFO (MainThread) [custom_components.visonic.pyvisonic] [data receiver] *** Received validated message 0X2 ***
10622020-10-30 11:14:49 INFO (MainThread) [custom_components.visonic.pyvisonic] [handle_msgtype02]    Received a powerlink acknowledge, I am in STANDARD_PLUS mode
10632020-10-30 11:14:49 INFO (MainThread) [custom_components.visonic.pyvisonic] [data receiver] *** Received validated message 0XA5 ***
10642020-10-30 11:14:50 INFO (MainThread) [custom_components.visonic.pyvisonic] [data receiver] *** Received validated message 0XA5 ***
10652020-10-30 11:14:50 INFO (MainThread) [custom_components.visonic.pyvisonic] [data receiver] *** Received validated message 0XA5 ***
10662020-10-30 11:14:50 INFO (MainThread) [custom_components.visonic.pyvisonic] [data receiver] *** Received validated message 0XA5 ***
10672020-10-30 11:14:50 INFO (MainThread) [custom_components.visonic.pyvisonic] [data receiver] *** Received validated message 0XA5 ***
10682020-10-30 11:14:50 INFO (MainThread) [custom_components.visonic.pyvisonic] [data receiver] *** Received validated message 0XA5 ***
10692020-10-30 11:14:50 INFO (MainThread) [custom_components.visonic.pyvisonic] =============================================== Display Status ===============================================
10702020-10-30 11:14:50 INFO (MainThread) [custom_components.visonic.pyvisonic]      key 0  Sensor id=1  dname=Z01  stype=Magnet   zname=Front door     ztypeName=Delay 1    ztamper=0  ztrip=0  bypass=0  lowbatt=0  status=0  tamper=0  enrolled=1  triggered=0 
10712020-10-30 11:14:50 INFO (MainThread) [custom_components.visonic.pyvisonic]      key 1  Sensor id=2  dname=Z02  stype=Motion   zname=Hall           ztypeName=Delay 1    ztamper=0  ztrip=0  bypass=0  lowbatt=0  status=0  tamper=0  enrolled=1  triggered=0 
10722020-10-30 11:14:50 INFO (MainThread) [custom_components.visonic.pyvisonic]      key 2  Sensor id=3  dname=Z03  stype=Motion   zname=Dining room    ztypeName=Perimeter  ztamper=0  ztrip=0  bypass=0  lowbatt=0  status=0  tamper=0  enrolled=1  triggered=0 
10732020-10-30 11:14:50 INFO (MainThread) [custom_components.visonic.pyvisonic]      key 3  Sensor id=4  dname=Z04  stype=Motion   zname=Living room    ztypeName=Perimeter  ztamper=0  ztrip=0  bypass=0  lowbatt=0  status=0  tamper=0  enrolled=1  triggered=0 
10742020-10-30 11:14:50 INFO (MainThread) [custom_components.visonic.pyvisonic]    Model PowerMax Pro           PowerMaster No                     LastEvent None                   Ready   Yes          
10752020-10-30 11:14:50 INFO (MainThread) [custom_components.visonic.pyvisonic]    Mode  Standard Plus          Status      Disarmed               Armed     No                     Trouble None              AlarmStatus None        
10762020-10-30 11:14:50 INFO (MainThread) [custom_components.visonic.pyvisonic] ==============================================================================================================
10772020-10-30 11:14:50 INFO (MainThread) [homeassistant.components.automation.4_1_0_sync_state_switch_tv_front_end_with_reality] 4.1.0 Sync state switch tv front-end with reality: Running automation actions
10782020-10-30 11:14:50 INFO (MainThread) [homeassistant.components.automation.4_1_0_sync_state_switch_tv_front_end_with_reality] 4.1.0 Sync state switch tv front-end with reality: Executing step call service
10792020-10-30 11:14:50 INFO (MainThread) [homeassistant.components.system_log.external] 4.1.0 The state of Ping 10.58.60.16 binary_sensor.ping_10_58_60_16 changed from on to on
10802020-10-30 11:14:50 INFO (MainThread) [homeassistant.components.automation.4_1_0_sync_state_switch_tv_front_end_with_reality] 4.1.0 Sync state switch tv front-end with reality: Executing step call service
10812020-10-30 11:14:50 INFO (SyncWorker_10) [homeassistant.components.python_script] Executing set_state.py: {'entity_id': 'switch.tv_toggle', 'state': 'on'}
10822020-10-30 11:14:50 INFO (SyncWorker_10) [homeassistant.components.python_script.set_state.py] switch.tv_toggle: state> on
10832020-10-30 11:14:51 INFO (MainThread) [custom_components.visonic.pyvisonic] [data receiver] *** Received validated message 0XA5 ***
10842020-10-30 11:14:51 INFO (MainThread) [custom_components.visonic.pyvisonic] [data receiver] *** Received validated message 0XA5 ***
10852020-10-30 11:14:51 INFO (MainThread) [custom_components.visonic.pyvisonic] [data receiver] *** Received validated message 0XA5 ***
10862020-10-30 11:14:55 DEBUG (MainThread) [xknx.raw_socket] Received from ('10.58.60.11', 3671): 06100420001504112d002900bce01109280c010081
10872020-10-30 11:14:55 DEBUG (MainThread) [xknx.knx] Received: <KNXIPFrame <KNXIPHeader HeaderLength="6" ProtocolVersion="16" KNXIPServiceType="KNXIPServiceType.TUNNELLING_REQUEST" Reserve="0" TotalLength="21" />
1088 body="<TunnellingRequest communication_channel_id="17" sequence_counter="45" cemi="<CEMIFrame SourceAddress="PhysicalAddress("1.1.9")" DestinationAddress="GroupAddress("5/0/12")" Flags="1011110011100000" Command="APCICommand.GROUP_WRITE" payload="<DPTBinary value="1" />" />" />" />
10892020-10-30 11:14:55 DEBUG (MainThread) [xknx.knx] Sending: <KNXIPFrame <KNXIPHeader HeaderLength="6" ProtocolVersion="16" KNXIPServiceType="KNXIPServiceType.TUNNELLING_ACK" Reserve="0" TotalLength="10" />
1090 body="<TunnellingAck communication_channel_id="17" sequence_counter="45" status_code="ErrorCode.E_NO_ERROR" />" />
10912020-10-30 11:14:55 DEBUG (MainThread) [xknx.telegram] <Telegram group_address="GroupAddress("5/0/12")", payload="<DPTBinary value="1" />" telegramtype="TelegramType.GROUP_WRITE" direction="TelegramDirection.INCOMING" />
10922020-10-30 11:14:55 DEBUG (MainThread) [xknx.raw_socket] Received from ('10.58.60.11', 3671): 06100420001704112e002900bce01109280a0300801ddc
10932020-10-30 11:14:55 DEBUG (MainThread) [xknx.knx] Received: <KNXIPFrame <KNXIPHeader HeaderLength="6" ProtocolVersion="16" KNXIPServiceType="KNXIPServiceType.TUNNELLING_REQUEST" Reserve="0" TotalLength="23" />
1094 body="<TunnellingRequest communication_channel_id="17" sequence_counter="46" cemi="<CEMIFrame SourceAddress="PhysicalAddress("1.1.9")" DestinationAddress="GroupAddress("5/0/10")" Flags="1011110011100000" Command="APCICommand.GROUP_WRITE" payload="<DPTArray value="[0x1d,0xdc]" />" />" />" />
10952020-10-30 11:14:55 DEBUG (MainThread) [xknx.knx] Sending: <KNXIPFrame <KNXIPHeader HeaderLength="6" ProtocolVersion="16" KNXIPServiceType="KNXIPServiceType.TUNNELLING_ACK" Reserve="0" TotalLength="10" />
1096 body="<TunnellingAck communication_channel_id="17" sequence_counter="46" status_code="ErrorCode.E_NO_ERROR" />" />
10972020-10-30 11:14:55 DEBUG (MainThread) [xknx.telegram] <Telegram group_address="GroupAddress("5/0/10")", payload="<DPTArray value="[0x1d,0xdc]" />" telegramtype="TelegramType.GROUP_WRITE" direction="TelegramDirection.INCOMING" />
10982020-10-30 11:14:55 INFO (MainThread) [homeassistant.components.automation.4_1_0_sync_state_switch_tv_front_end_with_reality] 4.1.0 Sync state switch tv front-end with reality: Running automation actions
10992020-10-30 11:14:55 INFO (MainThread) [homeassistant.components.automation.4_1_0_sync_state_switch_tv_front_end_with_reality] 4.1.0 Sync state switch tv front-end with reality: Executing step call service
11002020-10-30 11:14:55 INFO (MainThread) [homeassistant.components.system_log.external] 4.1.0 The state of Ping 10.58.60.16 binary_sensor.ping_10_58_60_16 changed from on to on
11012020-10-30 11:14:55 INFO (MainThread) [homeassistant.components.automation.4_1_0_sync_state_switch_tv_front_end_with_reality] 4.1.0 Sync state switch tv front-end with reality: Executing step call service
11022020-10-30 11:14:55 INFO (SyncWorker_40) [homeassistant.components.python_script] Executing set_state.py: {'entity_id': 'switch.tv_toggle', 'state': 'on'}
11032020-10-30 11:14:55 INFO (SyncWorker_40) [homeassistant.components.python_script.set_state.py] switch.tv_toggle: state> on
11042020-10-30 11:15:00 INFO (MainThread) [homeassistant.components.automation.4_1_0_sync_state_switch_tv_front_end_with_reality] 4.1.0 Sync state switch tv front-end with reality: Running automation actions
11052020-10-30 11:15:00 INFO (MainThread) [homeassistant.components.automation.4_1_0_sync_state_switch_tv_front_end_with_reality] 4.1.0 Sync state switch tv front-end with reality: Executing step call service
11062020-10-30 11:15:00 INFO (MainThread) [homeassistant.components.system_log.external] 4.1.0 The state of Ping 10.58.60.16 binary_sensor.ping_10_58_60_16 changed from on to on
11072020-10-30 11:15:00 INFO (MainThread) [homeassistant.components.automation.4_1_0_sync_state_switch_tv_front_end_with_reality] 4.1.0 Sync state switch tv front-end with reality: Executing step call service
11082020-10-30 11:15:00 INFO (SyncWorker_27) [homeassistant.components.python_script] Executing set_state.py: {'entity_id': 'switch.tv_toggle', 'state': 'on'}
11092020-10-30 11:15:00 INFO (SyncWorker_27) [homeassistant.components.python_script.set_state.py] switch.tv_toggle: state> on
11102020-10-30 11:15:01 DEBUG (MainThread) [xknx.raw_socket] Received from ('10.58.60.11', 3671): 06100420001504112f002900bce01109280c010080
11112020-10-30 11:15:01 DEBUG (MainThread) [xknx.knx] Received: <KNXIPFrame <KNXIPHeader HeaderLength="6" ProtocolVersion="16" KNXIPServiceType="KNXIPServiceType.TUNNELLING_REQUEST" Reserve="0" TotalLength="21" />
1112 body="<TunnellingRequest communication_channel_id="17" sequence_counter="47" cemi="<CEMIFrame SourceAddress="PhysicalAddress("1.1.9")" DestinationAddress="GroupAddress("5/0/12")" Flags="1011110011100000" Command="APCICommand.GROUP_WRITE" payload="<DPTBinary value="0" />" />" />" />
11132020-10-30 11:15:01 DEBUG (MainThread) [xknx.knx] Sending: <KNXIPFrame <KNXIPHeader HeaderLength="6" ProtocolVersion="16" KNXIPServiceType="KNXIPServiceType.TUNNELLING_ACK" Reserve="0" TotalLength="10" />
1114 body="<TunnellingAck communication_channel_id="17" sequence_counter="47" status_code="ErrorCode.E_NO_ERROR" />" />
11152020-10-30 11:15:01 DEBUG (MainThread) [xknx.telegram] <Telegram group_address="GroupAddress("5/0/12")", payload="<DPTBinary value="0" />" telegramtype="TelegramType.GROUP_WRITE" direction="TelegramDirection.INCOMING" />
11162020-10-30 11:15:04 DEBUG (MainThread) [xknx.knx] Sending: <KNXIPFrame <KNXIPHeader HeaderLength="6" ProtocolVersion="16" KNXIPServiceType="KNXIPServiceType.CONNECTIONSTATE_REQUEST" Reserve="0" TotalLength="16" />
1117 body="<ConnectionStateRequest CommunicationChannelID="17", control_endpoint="<HPAI 10.58.60.89:35606 />" />" />
11182020-10-30 11:15:04 DEBUG (MainThread) [xknx.raw_socket] Received from ('10.58.60.11', 3671): 0610020800081100
11192020-10-30 11:15:04 DEBUG (MainThread) [xknx.knx] Received: <KNXIPFrame <KNXIPHeader HeaderLength="6" ProtocolVersion="16" KNXIPServiceType="KNXIPServiceType.CONNECTIONSTATE_RESPONSE" Reserve="0" TotalLength="8" />
1120 body="<ConnectionStateResponse CommunicationChannelID="17" status_code="ErrorCode.E_NO_ERROR" />" />
11212020-10-30 11:15:06 INFO (MainThread) [homeassistant.components.automation.4_1_0_sync_state_switch_tv_front_end_with_reality] 4.1.0 Sync state switch tv front-end with reality: Running automation actions
11222020-10-30 11:15:06 INFO (MainThread) [homeassistant.components.automation.4_1_0_sync_state_switch_tv_front_end_with_reality] 4.1.0 Sync state switch tv front-end with reality: Executing step call service
11232020-10-30 11:15:06 INFO (MainThread) [homeassistant.components.system_log.external] 4.1.0 The state of Ping 10.58.60.16 binary_sensor.ping_10_58_60_16 changed from on to on
11242020-10-30 11:15:06 INFO (MainThread) [homeassistant.components.automation.4_1_0_sync_state_switch_tv_front_end_with_reality] 4.1.0 Sync state switch tv front-end with reality: Executing step call service
11252020-10-30 11:15:06 INFO (SyncWorker_2) [homeassistant.components.python_script] Executing set_state.py: {'entity_id': 'switch.tv_toggle', 'state': 'on'}
11262020-10-30 11:15:06 INFO (SyncWorker_2) [homeassistant.components.python_script.set_state.py] switch.tv_toggle: state> on
11272020-10-30 11:15:07 DEBUG (MainThread) [xknx.raw_socket] Received from ('10.58.60.11', 3671): 061004200017041130002900bce01109280a0300801d5c
11282020-10-30 11:15:07 DEBUG (MainThread) [xknx.knx] Received: <KNXIPFrame <KNXIPHeader HeaderLength="6" ProtocolVersion="16" KNXIPServiceType="KNXIPServiceType.TUNNELLING_REQUEST" Reserve="0" TotalLength="23" />
1129 body="<TunnellingRequest communication_channel_id="17" sequence_counter="48" cemi="<CEMIFrame SourceAddress="PhysicalAddress("1.1.9")" DestinationAddress="GroupAddress("5/0/10")" Flags="1011110011100000" Command="APCICommand.GROUP_WRITE" payload="<DPTArray value="[0x1d,0x5c]" />" />" />" />
11302020-10-30 11:15:07 DEBUG (MainThread) [xknx.knx] Sending: <KNXIPFrame <KNXIPHeader HeaderLength="6" ProtocolVersion="16" KNXIPServiceType="KNXIPServiceType.TUNNELLING_ACK" Reserve="0" TotalLength="10" />
1131 body="<TunnellingAck communication_channel_id="17" sequence_counter="48" status_code="ErrorCode.E_NO_ERROR" />" />
11322020-10-30 11:15:07 DEBUG (MainThread) [xknx.telegram] <Telegram group_address="GroupAddress("5/0/10")", payload="<DPTArray value="[0x1d,0x5c]" />" telegramtype="TelegramType.GROUP_WRITE" direction="TelegramDirection.INCOMING" />
11332020-10-30 11:15:10 INFO (MainThread) [homeassistant.components.automation.4_1_0_sync_state_switch_tv_front_end_with_reality] 4.1.0 Sync state switch tv front-end with reality: Running automation actions
11342020-10-30 11:15:10 INFO (MainThread) [homeassistant.components.automation.4_1_0_sync_state_switch_tv_front_end_with_reality] 4.1.0 Sync state switch tv front-end with reality: Executing step call service
11352020-10-30 11:15:10 INFO (MainThread) [homeassistant.components.system_log.external] 4.1.0 The state of Ping 10.58.60.16 binary_sensor.ping_10_58_60_16 changed from on to on
11362020-10-30 11:15:10 INFO (MainThread) [homeassistant.components.automation.4_1_0_sync_state_switch_tv_front_end_with_reality] 4.1.0 Sync state switch tv front-end with reality: Executing step call service
11372020-10-30 11:15:10 INFO (SyncWorker_42) [homeassistant.components.python_script] Executing set_state.py: {'entity_id': 'switch.tv_toggle', 'state': 'on'}
11382020-10-30 11:15:10 INFO (SyncWorker_42) [homeassistant.components.python_script.set_state.py] switch.tv_toggle: state> on
11392020-10-30 11:15:15 INFO (MainThread) [homeassistant.components.automation.4_1_0_sync_state_switch_tv_front_end_with_reality] 4.1.0 Sync state switch tv front-end with reality: Running automation actions
11402020-10-30 11:15:15 INFO (MainThread) [homeassistant.components.automation.4_1_0_sync_state_switch_tv_front_end_with_reality] 4.1.0 Sync state switch tv front-end with reality: Executing step call service
11412020-10-30 11:15:15 INFO (MainThread) [homeassistant.components.system_log.external] 4.1.0 The state of Ping 10.58.60.16 binary_sensor.ping_10_58_60_16 changed from on to on
11422020-10-30 11:15:15 INFO (MainThread) [homeassistant.components.automation.4_1_0_sync_state_switch_tv_front_end_with_reality] 4.1.0 Sync state switch tv front-end with reality: Executing step call service
11432020-10-30 11:15:15 INFO (SyncWorker_46) [homeassistant.components.python_script] Executing set_state.py: {'entity_id': 'switch.tv_toggle', 'state': 'on'}
11442020-10-30 11:15:15 INFO (SyncWorker_46) [homeassistant.components.python_script.set_state.py] switch.tv_toggle: state> on
11452020-10-30 11:15:16 DEBUG (MainThread) [xknx.raw_socket] Received from ('10.58.60.11', 3671): 061004200017041131002900bce0110328010300801ca3
11462020-10-30 11:15:16 DEBUG (MainThread) [xknx.knx] Received: <KNXIPFrame <KNXIPHeader HeaderLength="6" ProtocolVersion="16" KNXIPServiceType="KNXIPServiceType.TUNNELLING_REQUEST" Reserve="0" TotalLength="23" />
1147 body="<TunnellingRequest communication_channel_id="17" sequence_counter="49" cemi="<CEMIFrame SourceAddress="PhysicalAddress("1.1.3")" DestinationAddress="GroupAddress("5/0/1")" Flags="1011110011100000" Command="APCICommand.GROUP_WRITE" payload="<DPTArray value="[0x1c,0xa3]" />" />" />" />
11482020-10-30 11:15:16 DEBUG (MainThread) [xknx.knx] Sending: <KNXIPFrame <KNXIPHeader HeaderLength="6" ProtocolVersion="16" KNXIPServiceType="KNXIPServiceType.TUNNELLING_ACK" Reserve="0" TotalLength="10" />
1149 body="<TunnellingAck communication_channel_id="17" sequence_counter="49" status_code="ErrorCode.E_NO_ERROR" />" />
11502020-10-30 11:15:16 DEBUG (MainThread) [xknx.telegram] <Telegram group_address="GroupAddress("5/0/1")", payload="<DPTArray value="[0x1c,0xa3]" />" telegramtype="TelegramType.GROUP_WRITE" direction="TelegramDirection.INCOMING" />
11512020-10-30 11:15:16 INFO (MainThread) [custom_components.visonic.pyvisonic] [data receiver] *** Received validated message 0X2 ***
11522020-10-30 11:15:16 INFO (MainThread) [custom_components.visonic.pyvisonic] [handle_msgtype02]    Received a powerlink acknowledge, I am in STANDARD_PLUS mode
11532020-10-30 11:15:19 INFO (MainThread) [custom_components.visonic.pyvisonic] [data receiver] *** Received validated message 0XAB ***
11542020-10-30 11:15:19 INFO (MainThread) [custom_components.visonic.pyvisonic] [handle_msgtypeAB] ***************************** Got PowerLink Keep-Alive ****************************
11552020-10-30 11:15:19 INFO (MainThread) [custom_components.visonic.pyvisonic] [handle_msgtypeAB]         Got alive message while Powerlink mode pending, going to full powerlink and calling Restore
11562020-10-30 11:15:19 INFO (MainThread) [custom_components.visonic.pyvisonic] =============================================== Display Status ===============================================
11572020-10-30 11:15:19 INFO (MainThread) [custom_components.visonic.pyvisonic]      key 0  Sensor id=1  dname=Z01  stype=Magnet   zname=Front door     ztypeName=Delay 1    ztamper=0  ztrip=0  bypass=0  lowbatt=0  status=0  tamper=0  enrolled=1  triggered=0 
11582020-10-30 11:15:19 INFO (MainThread) [custom_components.visonic.pyvisonic]      key 1  Sensor id=2  dname=Z02  stype=Motion   zname=Hall           ztypeName=Delay 1    ztamper=0  ztrip=0  bypass=0  lowbatt=0  status=0  tamper=0  enrolled=1  triggered=0 
11592020-10-30 11:15:19 INFO (MainThread) [custom_components.visonic.pyvisonic]      key 2  Sensor id=3  dname=Z03  stype=Motion   zname=Dining room    ztypeName=Perimeter  ztamper=0  ztrip=0  bypass=0  lowbatt=0  status=0  tamper=0  enrolled=1  triggered=0 
11602020-10-30 11:15:19 INFO (MainThread) [custom_components.visonic.pyvisonic]      key 3  Sensor id=4  dname=Z04  stype=Motion   zname=Living room    ztypeName=Perimeter  ztamper=0  ztrip=0  bypass=0  lowbatt=0  status=0  tamper=0  enrolled=1  triggered=0 
11612020-10-30 11:15:19 INFO (MainThread) [custom_components.visonic.pyvisonic]    Model PowerMax Pro           PowerMaster No                     LastEvent None                   Ready   Yes          
11622020-10-30 11:15:19 INFO (MainThread) [custom_components.visonic.pyvisonic]    Mode  Powerlink              Status      Disarmed               Armed     No                     Trouble None              AlarmStatus None        
11632020-10-30 11:15:19 INFO (MainThread) [custom_components.visonic.pyvisonic] ==============================================================================================================
11642020-10-30 11:15:19 INFO (MainThread) [custom_components.visonic.pyvisonic] [data receiver] *** Received validated message 0X2 ***
11652020-10-30 11:15:19 INFO (MainThread) [custom_components.visonic.pyvisonic] [data receiver] *** Received validated message 0XA5 ***
11662020-10-30 11:15:19 INFO (MainThread) [custom_components.visonic.pyvisonic] [data receiver] *** Received validated message 0XA5 ***
11672020-10-30 11:15:19 DEBUG (MainThread) [xknx.knx] Sending: <KNXIPFrame <KNXIPHeader HeaderLength="6" ProtocolVersion="16" KNXIPServiceType="KNXIPServiceType.CONNECTIONSTATE_REQUEST" Reserve="0" TotalLength="16" />
1168 body="<ConnectionStateRequest CommunicationChannelID="17", control_endpoint="<HPAI 10.58.60.89:35606 />" />" />
11692020-10-30 11:15:19 DEBUG (MainThread) [xknx.raw_socket] Received from ('10.58.60.11', 3671): 0610020800081100
11702020-10-30 11:15:19 DEBUG (MainThread) [xknx.knx] Received: <KNXIPFrame <KNXIPHeader HeaderLength="6" ProtocolVersion="16" KNXIPServiceType="KNXIPServiceType.CONNECTIONSTATE_RESPONSE" Reserve="0" TotalLength="8" />
1171 body="<ConnectionStateResponse CommunicationChannelID="17" status_code="ErrorCode.E_NO_ERROR" />" />
11722020-10-30 11:15:19 INFO (MainThread) [custom_components.visonic.pyvisonic] [data receiver] *** Received validated message 0XA5 ***
11732020-10-30 11:15:20 INFO (MainThread) [custom_components.visonic.pyvisonic] [data receiver] *** Received validated message 0XA5 ***
11742020-10-30 11:15:20 INFO (MainThread) [custom_components.visonic.pyvisonic] [data receiver] *** Received validated message 0XA5 ***
11752020-10-30 11:15:20 INFO (MainThread) [custom_components.visonic.pyvisonic] [data receiver] *** Received validated message 0XA5 ***
11762020-10-30 11:15:20 INFO (MainThread) [custom_components.visonic.pyvisonic] =============================================== Display Status ===============================================
11772020-10-30 11:15:20 INFO (MainThread) [custom_components.visonic.pyvisonic]      key 0  Sensor id=1  dname=Z01  stype=Magnet   zname=Front door     ztypeName=Delay 1    ztamper=0  ztrip=0  bypass=0  lowbatt=0  status=0  tamper=0  enrolled=1  triggered=0 
11782020-10-30 11:15:20 INFO (MainThread) [custom_components.visonic.pyvisonic]      key 1  Sensor id=2  dname=Z02  stype=Motion   zname=Hall           ztypeName=Delay 1    ztamper=0  ztrip=0  bypass=0  lowbatt=0  status=0  tamper=0  enrolled=1  triggered=0 
11792020-10-30 11:15:20 INFO (MainThread) [custom_components.visonic.pyvisonic]      key 2  Sensor id=3  dname=Z03  stype=Motion   zname=Dining room    ztypeName=Perimeter  ztamper=0  ztrip=0  bypass=0  lowbatt=0  status=0  tamper=0  enrolled=1  triggered=0 
11802020-10-30 11:15:20 INFO (MainThread) [custom_components.visonic.pyvisonic]      key 3  Sensor id=4  dname=Z04  stype=Motion   zname=Living room    ztypeName=Perimeter  ztamper=0  ztrip=0  bypass=0  lowbatt=0  status=0  tamper=0  enrolled=1  triggered=0 
11812020-10-30 11:15:20 INFO (MainThread) [custom_components.visonic.pyvisonic]    Model PowerMax Pro           PowerMaster No                     LastEvent None                   Ready   Yes          
11822020-10-30 11:15:20 INFO (MainThread) [custom_components.visonic.pyvisonic]    Mode  Powerlink              Status      Disarmed               Armed     No                     Trouble None              AlarmStatus None        
11832020-10-30 11:15:20 INFO (MainThread) [custom_components.visonic.pyvisonic] ==============================================================================================================
11842020-10-30 11:15:21 INFO (MainThread) [homeassistant.components.automation.4_1_0_sync_state_switch_tv_front_end_with_reality] 4.1.0 Sync state switch tv front-end with reality: Running automation actions
11852020-10-30 11:15:21 INFO (MainThread) [homeassistant.components.automation.4_1_0_sync_state_switch_tv_front_end_with_reality] 4.1.0 Sync state switch tv front-end with reality: Executing step call service
11862020-10-30 11:15:21 INFO (MainThread) [custom_components.visonic.pyvisonic] [data receiver] *** Received validated message 0XA5 ***
11872020-10-30 11:15:21 INFO (MainThread) [homeassistant.components.system_log.external] 4.1.0 The state of Ping 10.58.60.16 binary_sensor.ping_10_58_60_16 changed from on to on
11882020-10-30 11:15:21 INFO (MainThread) [homeassistant.components.automation.4_1_0_sync_state_switch_tv_front_end_with_reality] 4.1.0 Sync state switch tv front-end with reality: Executing step call service
11892020-10-30 11:15:21 INFO (SyncWorker_50) [homeassistant.components.python_script] Executing set_state.py: {'entity_id': 'switch.tv_toggle', 'state': 'on'}
11902020-10-30 11:15:21 INFO (SyncWorker_50) [homeassistant.components.python_script.set_state.py] switch.tv_toggle: state> on
11912020-10-30 11:15:21 INFO (MainThread) [custom_components.visonic.pyvisonic] [data receiver] *** Received validated message 0XA5 ***
11922020-10-30 11:15:21 INFO (MainThread) [custom_components.visonic.pyvisonic] [data receiver] *** Received validated message 0XA5 ***
11932020-10-30 11:15:25 INFO (MainThread) [homeassistant.components.automation.4_1_0_sync_state_switch_tv_front_end_with_reality] 4.1.0 Sync state switch tv front-end with reality: Running automation actions
11942020-10-30 11:15:25 INFO (MainThread) [homeassistant.components.automation.4_1_0_sync_state_switch_tv_front_end_with_reality] 4.1.0 Sync state switch tv front-end with reality: Executing step call service
11952020-10-30 11:15:25 INFO (MainThread) [homeassistant.components.system_log.external] 4.1.0 The state of Ping 10.58.60.16 binary_sensor.ping_10_58_60_16 changed from on to on
11962020-10-30 11:15:25 INFO (MainThread) [homeassistant.components.automation.4_1_0_sync_state_switch_tv_front_end_with_reality] 4.1.0 Sync state switch tv front-end with reality: Executing step call service
11972020-10-30 11:15:25 INFO (SyncWorker_49) [homeassistant.components.python_script] Executing set_state.py: {'entity_id': 'switch.tv_toggle', 'state': 'on'}
11982020-10-30 11:15:25 INFO (SyncWorker_49) [homeassistant.components.python_script.set_state.py] switch.tv_toggle: state> on
11992020-10-30 11:15:30 INFO (MainThread) [homeassistant.components.automation.4_1_0_sync_state_switch_tv_front_end_with_reality] 4.1.0 Sync state switch tv front-end with reality: Running automation actions
12002020-10-30 11:15:30 INFO (MainThread) [homeassistant.components.automation.4_1_0_sync_state_switch_tv_front_end_with_reality] 4.1.0 Sync state switch tv front-end with reality: Executing step call service
12012020-10-30 11:15:30 INFO (MainThread) [homeassistant.components.system_log.external] 4.1.0 The state of Ping 10.58.60.16 binary_sensor.ping_10_58_60_16 changed from on to on
12022020-10-30 11:15:30 INFO (MainThread) [homeassistant.components.automation.4_1_0_sync_state_switch_tv_front_end_with_reality] 4.1.0 Sync state switch tv front-end with reality: Executing step call service
12032020-10-30 11:15:30 INFO (SyncWorker_52) [homeassistant.components.python_script] Executing set_state.py: {'entity_id': 'switch.tv_toggle', 'state': 'on'}
12042020-10-30 11:15:30 INFO (SyncWorker_52) [homeassistant.components.python_script.set_state.py] switch.tv_toggle: state> on
12052020-10-30 11:15:33 INFO (Dummy-32) [homeassistant.components.zwave] Z-Wave network is complete. All nodes on the network have been queried
12062020-10-30 11:15:34 INFO (MainThread) [homeassistant.components.zwave] Z-Wave ready after 80 seconds
12072020-10-30 11:15:34 INFO (SyncWorker_7) [homeassistant.components.zwave] Z-Wave polling interval set to 60000 ms
12082020-10-30 11:15:34 DEBUG (MainThread) [xknx.knx] Sending: <KNXIPFrame <KNXIPHeader HeaderLength="6" ProtocolVersion="16" KNXIPServiceType="KNXIPServiceType.CONNECTIONSTATE_REQUEST" Reserve="0" TotalLength="16" />
1209 body="<ConnectionStateRequest CommunicationChannelID="17", control_endpoint="<HPAI 10.58.60.89:35606 />" />" />
12102020-10-30 11:15:34 DEBUG (MainThread) [xknx.raw_socket] Received from ('10.58.60.11', 3671): 0610020800081100
12112020-10-30 11:15:34 DEBUG (MainThread) [xknx.knx] Received: <KNXIPFrame <KNXIPHeader HeaderLength="6" ProtocolVersion="16" KNXIPServiceType="KNXIPServiceType.CONNECTIONSTATE_RESPONSE" Reserve="0" TotalLength="8" />
1212 body="<ConnectionStateResponse CommunicationChannelID="17" status_code="ErrorCode.E_NO_ERROR" />" />
12132020-10-30 11:15:36 INFO (MainThread) [homeassistant.components.automation.4_1_0_sync_state_switch_tv_front_end_with_reality] 4.1.0 Sync state switch tv front-end with reality: Running automation actions
12142020-10-30 11:15:36 INFO (MainThread) [homeassistant.components.automation.4_1_0_sync_state_switch_tv_front_end_with_reality] 4.1.0 Sync state switch tv front-end with reality: Executing step call service
12152020-10-30 11:15:36 INFO (MainThread) [homeassistant.components.system_log.external] 4.1.0 The state of Ping 10.58.60.16 binary_sensor.ping_10_58_60_16 changed from on to on
12162020-10-30 11:15:36 INFO (MainThread) [homeassistant.components.automation.4_1_0_sync_state_switch_tv_front_end_with_reality] 4.1.0 Sync state switch tv front-end with reality: Executing step call service
12172020-10-30 11:15:36 INFO (SyncWorker_17) [homeassistant.components.python_script] Executing set_state.py: {'entity_id': 'switch.tv_toggle', 'state': 'on'}
12182020-10-30 11:15:36 INFO (SyncWorker_17) [homeassistant.components.python_script.set_state.py] switch.tv_toggle: state> on
12192020-10-30 11:15:36 DEBUG (MainThread) [xknx.raw_socket] Received from ('10.58.60.11', 3671): 061004200017041132002900bce0110828090300800758
12202020-10-30 11:15:36 DEBUG (MainThread) [xknx.knx] Received: <KNXIPFrame <KNXIPHeader HeaderLength="6" ProtocolVersion="16" KNXIPServiceType="KNXIPServiceType.TUNNELLING_REQUEST" Reserve="0" TotalLength="23" />
1221 body="<TunnellingRequest communication_channel_id="17" sequence_counter="50" cemi="<CEMIFrame SourceAddress="PhysicalAddress("1.1.8")" DestinationAddress="GroupAddress("5/0/9")" Flags="1011110011100000" Command="APCICommand.GROUP_WRITE" payload="<DPTArray value="[0x7,0x58]" />" />" />" />
12222020-10-30 11:15:36 DEBUG (MainThread) [xknx.knx] Sending: <KNXIPFrame <KNXIPHeader HeaderLength="6" ProtocolVersion="16" KNXIPServiceType="KNXIPServiceType.TUNNELLING_ACK" Reserve="0" TotalLength="10" />
1223 body="<TunnellingAck communication_channel_id="17" sequence_counter="50" status_code="ErrorCode.E_NO_ERROR" />" />
12242020-10-30 11:15:36 DEBUG (MainThread) [xknx.telegram] <Telegram group_address="GroupAddress("5/0/9")", payload="<DPTArray value="[0x7,0x58]" />" telegramtype="TelegramType.GROUP_WRITE" direction="TelegramDirection.INCOMING" />
12252020-10-30 11:15:38 DEBUG (MainThread) [xknx.raw_socket] Received from ('10.58.60.11', 3671): 061004200017041133002900bce0110728050300801cc5
12262020-10-30 11:15:38 DEBUG (MainThread) [xknx.knx] Received: <KNXIPFrame <KNXIPHeader HeaderLength="6" ProtocolVersion="16" KNXIPServiceType="KNXIPServiceType.TUNNELLING_REQUEST" Reserve="0" TotalLength="23" />
1227 body="<TunnellingRequest communication_channel_id="17" sequence_counter="51" cemi="<CEMIFrame SourceAddress="PhysicalAddress("1.1.7")" DestinationAddress="GroupAddress("5/0/5")" Flags="1011110011100000" Command="APCICommand.GROUP_WRITE" payload="<DPTArray value="[0x1c,0xc5]" />" />" />" />
12282020-10-30 11:15:38 DEBUG (MainThread) [xknx.knx] Sending: <KNXIPFrame <KNXIPHeader HeaderLength="6" ProtocolVersion="16" KNXIPServiceType="KNXIPServiceType.TUNNELLING_ACK" Reserve="0" TotalLength="10" />
1229 body="<TunnellingAck communication_channel_id="17" sequence_counter="51" status_code="ErrorCode.E_NO_ERROR" />" />
12302020-10-30 11:15:38 DEBUG (MainThread) [xknx.telegram] <Telegram group_address="GroupAddress("5/0/5")", payload="<DPTArray value="[0x1c,0xc5]" />" telegramtype="TelegramType.GROUP_WRITE" direction="TelegramDirection.INCOMING" />
12312020-10-30 11:15:40 INFO (MainThread) [homeassistant.components.automation.4_1_0_sync_state_switch_tv_front_end_with_reality] 4.1.0 Sync state switch tv front-end with reality: Running automation actions
12322020-10-30 11:15:40 INFO (MainThread) [homeassistant.components.automation.4_1_0_sync_state_switch_tv_front_end_with_reality] 4.1.0 Sync state switch tv front-end with reality: Executing step call service
12332020-10-30 11:15:40 INFO (MainThread) [homeassistant.components.system_log.external] 4.1.0 The state of Ping 10.58.60.16 binary_sensor.ping_10_58_60_16 changed from on to on
12342020-10-30 11:15:40 INFO (MainThread) [homeassistant.components.automation.4_1_0_sync_state_switch_tv_front_end_with_reality] 4.1.0 Sync state switch tv front-end with reality: Executing step call service
12352020-10-30 11:15:40 INFO (SyncWorker_30) [homeassistant.components.python_script] Executing set_state.py: {'entity_id': 'switch.tv_toggle', 'state': 'on'}
12362020-10-30 11:15:40 INFO (SyncWorker_30) [homeassistant.components.python_script.set_state.py] switch.tv_toggle: state> on
12372020-10-30 11:15:44 DEBUG (MainThread) [xknx.raw_socket] Received from ('10.58.60.11', 3671): 061004200015041134002900bce01109280c010081
12382020-10-30 11:15:44 DEBUG (MainThread) [xknx.knx] Received: <KNXIPFrame <KNXIPHeader HeaderLength="6" ProtocolVersion="16" KNXIPServiceType="KNXIPServiceType.TUNNELLING_REQUEST" Reserve="0" TotalLength="21" />
1239 body="<TunnellingRequest communication_channel_id="17" sequence_counter="52" cemi="<CEMIFrame SourceAddress="PhysicalAddress("1.1.9")" DestinationAddress="GroupAddress("5/0/12")" Flags="1011110011100000" Command="APCICommand.GROUP_WRITE" payload="<DPTBinary value="1" />" />" />" />
12402020-10-30 11:15:44 DEBUG (MainThread) [xknx.knx] Sending: <KNXIPFrame <KNXIPHeader HeaderLength="6" ProtocolVersion="16" KNXIPServiceType="KNXIPServiceType.TUNNELLING_ACK" Reserve="0" TotalLength="10" />
1241 body="<TunnellingAck communication_channel_id="17" sequence_counter="52" status_code="ErrorCode.E_NO_ERROR" />" />
12422020-10-30 11:15:44 DEBUG (MainThread) [xknx.telegram] <Telegram group_address="GroupAddress("5/0/12")", payload="<DPTBinary value="1" />" telegramtype="TelegramType.GROUP_WRITE" direction="TelegramDirection.INCOMING" />
12432020-10-30 11:15:44 DEBUG (MainThread) [xknx.raw_socket] Received from ('10.58.60.11', 3671): 061004200017041135002900bce01109280a0300801dec
12442020-10-30 11:15:44 DEBUG (MainThread) [xknx.knx] Received: <KNXIPFrame <KNXIPHeader HeaderLength="6" ProtocolVersion="16" KNXIPServiceType="KNXIPServiceType.TUNNELLING_REQUEST" Reserve="0" TotalLength="23" />
1245 body="<TunnellingRequest communication_channel_id="17" sequence_counter="53" cemi="<CEMIFrame SourceAddress="PhysicalAddress("1.1.9")" DestinationAddress="GroupAddress("5/0/10")" Flags="1011110011100000" Command="APCICommand.GROUP_WRITE" payload="<DPTArray value="[0x1d,0xec]" />" />" />" />
12462020-10-30 11:15:44 DEBUG (MainThread) [xknx.knx] Sending: <KNXIPFrame <KNXIPHeader HeaderLength="6" ProtocolVersion="16" KNXIPServiceType="KNXIPServiceType.TUNNELLING_ACK" Reserve="0" TotalLength="10" />
1247 body="<TunnellingAck communication_channel_id="17" sequence_counter="53" status_code="ErrorCode.E_NO_ERROR" />" />
12482020-10-30 11:15:44 DEBUG (MainThread) [xknx.telegram] <Telegram group_address="GroupAddress("5/0/10")", payload="<DPTArray value="[0x1d,0xec]" />" telegramtype="TelegramType.GROUP_WRITE" direction="TelegramDirection.INCOMING" />
12492020-10-30 11:15:45 INFO (MainThread) [homeassistant.components.automation.4_1_0_sync_state_switch_tv_front_end_with_reality] 4.1.0 Sync state switch tv front-end with reality: Running automation actions
12502020-10-30 11:15:45 INFO (MainThread) [homeassistant.components.automation.4_1_0_sync_state_switch_tv_front_end_with_reality] 4.1.0 Sync state switch tv front-end with reality: Executing step call service
12512020-10-30 11:15:45 INFO (MainThread) [homeassistant.components.system_log.external] 4.1.0 The state of Ping 10.58.60.16 binary_sensor.ping_10_58_60_16 changed from on to on
12522020-10-30 11:15:45 INFO (MainThread) [homeassistant.components.automation.4_1_0_sync_state_switch_tv_front_end_with_reality] 4.1.0 Sync state switch tv front-end with reality: Executing step call service
12532020-10-30 11:15:45 INFO (SyncWorker_19) [homeassistant.components.python_script] Executing set_state.py: {'entity_id': 'switch.tv_toggle', 'state': 'on'}
12542020-10-30 11:15:45 INFO (SyncWorker_19) [homeassistant.components.python_script.set_state.py] switch.tv_toggle: state> on
12552020-10-30 11:15:46 DEBUG (MainThread) [xknx.raw_socket] Received from ('10.58.60.11', 3671): 061004200015041136002900bce01109280c010080
12562020-10-30 11:15:46 DEBUG (MainThread) [xknx.knx] Received: <KNXIPFrame <KNXIPHeader HeaderLength="6" ProtocolVersion="16" KNXIPServiceType="KNXIPServiceType.TUNNELLING_REQUEST" Reserve="0" TotalLength="21" />
1257 body="<TunnellingRequest communication_channel_id="17" sequence_counter="54" cemi="<CEMIFrame SourceAddress="PhysicalAddress("1.1.9")" DestinationAddress="GroupAddress("5/0/12")" Flags="1011110011100000" Command="APCICommand.GROUP_WRITE" payload="<DPTBinary value="0" />" />" />" />
12582020-10-30 11:15:46 DEBUG (MainThread) [xknx.knx] Sending: <KNXIPFrame <KNXIPHeader HeaderLength="6" ProtocolVersion="16" KNXIPServiceType="KNXIPServiceType.TUNNELLING_ACK" Reserve="0" TotalLength="10" />
1259 body="<TunnellingAck communication_channel_id="17" sequence_counter="54" status_code="ErrorCode.E_NO_ERROR" />" />
12602020-10-30 11:15:46 DEBUG (MainThread) [xknx.telegram] <Telegram group_address="GroupAddress("5/0/12")", payload="<DPTBinary value="0" />" telegramtype="TelegramType.GROUP_WRITE" direction="TelegramDirection.INCOMING" />
12612020-10-30 11:15:49 INFO (MainThread) [custom_components.visonic.pyvisonic] [data receiver] *** Received validated message 0XAB ***
12622020-10-30 11:15:49 INFO (MainThread) [custom_components.visonic.pyvisonic] [handle_msgtypeAB] ***************************** Got PowerLink Keep-Alive ****************************
12632020-10-30 11:15:49 INFO (MainThread) [custom_components.visonic.pyvisonic] =============================================== Display Status ===============================================
12642020-10-30 11:15:49 INFO (MainThread) [custom_components.visonic.pyvisonic]      key 0  Sensor id=1  dname=Z01  stype=Magnet   zname=Front door     ztypeName=Delay 1    ztamper=0  ztrip=0  bypass=0  lowbatt=0  status=0  tamper=0  enrolled=1  triggered=0 
12652020-10-30 11:15:49 INFO (MainThread) [custom_components.visonic.pyvisonic]      key 1  Sensor id=2  dname=Z02  stype=Motion   zname=Hall           ztypeName=Delay 1    ztamper=0  ztrip=0  bypass=0  lowbatt=0  status=0  tamper=0  enrolled=1  triggered=0 
12662020-10-30 11:15:49 INFO (MainThread) [custom_components.visonic.pyvisonic]      key 2  Sensor id=3  dname=Z03  stype=Motion   zname=Dining room    ztypeName=Perimeter  ztamper=0  ztrip=0  bypass=0  lowbatt=0  status=0  tamper=0  enrolled=1  triggered=0 
12672020-10-30 11:15:49 INFO (MainThread) [custom_components.visonic.pyvisonic]      key 3  Sensor id=4  dname=Z04  stype=Motion   zname=Living room    ztypeName=Perimeter  ztamper=0  ztrip=0  bypass=0  lowbatt=0  status=0  tamper=0  enrolled=1  triggered=0 
12682020-10-30 11:15:49 INFO (MainThread) [custom_components.visonic.pyvisonic]    Model PowerMax Pro           PowerMaster No                     LastEvent None                   Ready   Yes          
12692020-10-30 11:15:49 INFO (MainThread) [custom_components.visonic.pyvisonic]    Mode  Powerlink              Status      Disarmed               Armed     No                     Trouble None              AlarmStatus None        
12702020-10-30 11:15:49 INFO (MainThread) [custom_components.visonic.pyvisonic] ==============================================================================================================
12712020-10-30 11:15:49 DEBUG (MainThread) [xknx.knx] Sending: <KNXIPFrame <KNXIPHeader HeaderLength="6" ProtocolVersion="16" KNXIPServiceType="KNXIPServiceType.CONNECTIONSTATE_REQUEST" Reserve="0" TotalLength="16" />
1272 body="<ConnectionStateRequest CommunicationChannelID="17", control_endpoint="<HPAI 10.58.60.89:35606 />" />" />
12732020-10-30 11:15:49 DEBUG (MainThread) [xknx.raw_socket] Received from ('10.58.60.11', 3671): 0610020800081100
12742020-10-30 11:15:49 DEBUG (MainThread) [xknx.knx] Received: <KNXIPFrame <KNXIPHeader HeaderLength="6" ProtocolVersion="16" KNXIPServiceType="KNXIPServiceType.CONNECTIONSTATE_RESPONSE" Reserve="0" TotalLength="8" />
1275 body="<ConnectionStateResponse CommunicationChannelID="17" status_code="ErrorCode.E_NO_ERROR" />" />
12762020-10-30 11:15:50 INFO (MainThread) [homeassistant.components.automation.4_1_0_sync_state_switch_tv_front_end_with_reality] 4.1.0 Sync state switch tv front-end with reality: Running automation actions
12772020-10-30 11:15:50 INFO (MainThread) [homeassistant.components.automation.4_1_0_sync_state_switch_tv_front_end_with_reality] 4.1.0 Sync state switch tv front-end with reality: Executing step call service
12782020-10-30 11:15:50 INFO (MainThread) [homeassistant.components.system_log.external] 4.1.0 The state of Ping 10.58.60.16 binary_sensor.ping_10_58_60_16 changed from on to on
12792020-10-30 11:15:50 INFO (MainThread) [homeassistant.components.automation.4_1_0_sync_state_switch_tv_front_end_with_reality] 4.1.0 Sync state switch tv front-end with reality: Executing step call service
12802020-10-30 11:15:50 INFO (SyncWorker_21) [homeassistant.components.python_script] Executing set_state.py: {'entity_id': 'switch.tv_toggle', 'state': 'on'}
12812020-10-30 11:15:50 INFO (SyncWorker_21) [homeassistant.components.python_script.set_state.py] switch.tv_toggle: state> on
12822020-10-30 11:15:55 INFO (MainThread) [homeassistant.components.automation.4_1_0_sync_state_switch_tv_front_end_with_reality] 4.1.0 Sync state switch tv front-end with reality: Running automation actions
12832020-10-30 11:15:55 INFO (MainThread) [homeassistant.components.automation.4_1_0_sync_state_switch_tv_front_end_with_reality] 4.1.0 Sync state switch tv front-end with reality: Executing step call service
12842020-10-30 11:15:55 INFO (MainThread) [homeassistant.components.system_log.external] 4.1.0 The state of Ping 10.58.60.16 binary_sensor.ping_10_58_60_16 changed from on to on
12852020-10-30 11:15:55 INFO (MainThread) [homeassistant.components.automation.4_1_0_sync_state_switch_tv_front_end_with_reality] 4.1.0 Sync state switch tv front-end with reality: Executing step call service
12862020-10-30 11:15:55 INFO (SyncWorker_36) [homeassistant.components.python_script] Executing set_state.py: {'entity_id': 'switch.tv_toggle', 'state': 'on'}
12872020-10-30 11:15:55 INFO (SyncWorker_36) [homeassistant.components.python_script.set_state.py] switch.tv_toggle: state> on
12882020-10-30 11:15:56 DEBUG (MainThread) [xknx.raw_socket] Received from ('10.58.60.11', 3671): 061004200015041137002900bce01109280c010081
12892020-10-30 11:15:56 DEBUG (MainThread) [xknx.knx] Received: <KNXIPFrame <KNXIPHeader HeaderLength="6" ProtocolVersion="16" KNXIPServiceType="KNXIPServiceType.TUNNELLING_REQUEST" Reserve="0" TotalLength="21" />
1290 body="<TunnellingRequest communication_channel_id="17" sequence_counter="55" cemi="<CEMIFrame SourceAddress="PhysicalAddress("1.1.9")" DestinationAddress="GroupAddress("5/0/12")" Flags="1011110011100000" Command="APCICommand.GROUP_WRITE" payload="<DPTBinary value="1" />" />" />" />
12912020-10-30 11:15:56 DEBUG (MainThread) [xknx.knx] Sending: <KNXIPFrame <KNXIPHeader HeaderLength="6" ProtocolVersion="16" KNXIPServiceType="KNXIPServiceType.TUNNELLING_ACK" Reserve="0" TotalLength="10" />
1292 body="<TunnellingAck communication_channel_id="17" sequence_counter="55" status_code="ErrorCode.E_NO_ERROR" />" />
12932020-10-30 11:15:56 DEBUG (MainThread) [xknx.telegram] <Telegram group_address="GroupAddress("5/0/12")", payload="<DPTBinary value="1" />" telegramtype="TelegramType.GROUP_WRITE" direction="TelegramDirection.INCOMING" />
12942020-10-30 11:15:57 DEBUG (MainThread) [xknx.raw_socket] Received from ('10.58.60.11', 3671): 061004200015041138002900bce01109280c010080
12952020-10-30 11:15:57 DEBUG (MainThread) [xknx.knx] Received: <KNXIPFrame <KNXIPHeader HeaderLength="6" ProtocolVersion="16" KNXIPServiceType="KNXIPServiceType.TUNNELLING_REQUEST" Reserve="0" TotalLength="21" />
1296 body="<TunnellingRequest communication_channel_id="17" sequence_counter="56" cemi="<CEMIFrame SourceAddress="PhysicalAddress("1.1.9")" DestinationAddress="GroupAddress("5/0/12")" Flags="1011110011100000" Command="APCICommand.GROUP_WRITE" payload="<DPTBinary value="0" />" />" />" />
12972020-10-30 11:15:57 DEBUG (MainThread) [xknx.knx] Sending: <KNXIPFrame <KNXIPHeader HeaderLength="6" ProtocolVersion="16" KNXIPServiceType="KNXIPServiceType.TUNNELLING_ACK" Reserve="0" TotalLength="10" />
1298 body="<TunnellingAck communication_channel_id="17" sequence_counter="56" status_code="ErrorCode.E_NO_ERROR" />" />
12992020-10-30 11:15:57 DEBUG (MainThread) [xknx.telegram] <Telegram group_address="GroupAddress("5/0/12")", payload="<DPTBinary value="0" />" telegramtype="TelegramType.GROUP_WRITE" direction="TelegramDirection.INCOMING" />
13002020-10-30 11:16:00 DEBUG (MainThread) [xknx.raw_socket] Received from ('10.58.60.11', 3671): 061004200015041139002900bce01109280c010081
13012020-10-30 11:16:00 DEBUG (MainThread) [xknx.knx] Received: <KNXIPFrame <KNXIPHeader HeaderLength="6" ProtocolVersion="16" KNXIPServiceType="KNXIPServiceType.TUNNELLING_REQUEST" Reserve="0" TotalLength="21" />
1302 body="<TunnellingRequest communication_channel_id="17" sequence_counter="57" cemi="<CEMIFrame SourceAddress="PhysicalAddress("1.1.9")" DestinationAddress="GroupAddress("5/0/12")" Flags="1011110011100000" Command="APCICommand.GROUP_WRITE" payload="<DPTBinary value="1" />" />" />" />
13032020-10-30 11:16:00 DEBUG (MainThread) [xknx.knx] Sending: <KNXIPFrame <KNXIPHeader HeaderLength="6" ProtocolVersion="16" KNXIPServiceType="KNXIPServiceType.TUNNELLING_ACK" Reserve="0" TotalLength="10" />
1304 body="<TunnellingAck communication_channel_id="17" sequence_counter="57" status_code="ErrorCode.E_NO_ERROR" />" />
13052020-10-30 11:16:00 DEBUG (MainThread) [xknx.telegram] <Telegram group_address="GroupAddress("5/0/12")", payload="<DPTBinary value="1" />" telegramtype="TelegramType.GROUP_WRITE" direction="TelegramDirection.INCOMING" />
13062020-10-30 11:16:00 INFO (MainThread) [homeassistant.components.automation.4_1_0_sync_state_switch_tv_front_end_with_reality] 4.1.0 Sync state switch tv front-end with reality: Running automation actions
13072020-10-30 11:16:00 INFO (MainThread) [homeassistant.components.automation.4_1_0_sync_state_switch_tv_front_end_with_reality] 4.1.0 Sync state switch tv front-end with reality: Executing step call service
13082020-10-30 11:16:00 INFO (MainThread) [homeassistant.components.system_log.external] 4.1.0 The state of Ping 10.58.60.16 binary_sensor.ping_10_58_60_16 changed from on to on
13092020-10-30 11:16:00 INFO (MainThread) [homeassistant.components.automation.4_1_0_sync_state_switch_tv_front_end_with_reality] 4.1.0 Sync state switch tv front-end with reality: Executing step call service
13102020-10-30 11:16:00 INFO (SyncWorker_26) [homeassistant.components.python_script] Executing set_state.py: {'entity_id': 'switch.tv_toggle', 'state': 'on'}
13112020-10-30 11:16:00 INFO (SyncWorker_26) [homeassistant.components.python_script.set_state.py] switch.tv_toggle: state> on
13122020-10-30 11:16:01 DEBUG (MainThread) [xknx.raw_socket] Received from ('10.58.60.11', 3671): 06100420001504113a002900bce01109280c010080
13132020-10-30 11:16:01 DEBUG (MainThread) [xknx.knx] Received: <KNXIPFrame <KNXIPHeader HeaderLength="6" ProtocolVersion="16" KNXIPServiceType="KNXIPServiceType.TUNNELLING_REQUEST" Reserve="0" TotalLength="21" />
1314 body="<TunnellingRequest communication_channel_id="17" sequence_counter="58" cemi="<CEMIFrame SourceAddress="PhysicalAddress("1.1.9")" DestinationAddress="GroupAddress("5/0/12")" Flags="1011110011100000" Command="APCICommand.GROUP_WRITE" payload="<DPTBinary value="0" />" />" />" />
13152020-10-30 11:16:01 DEBUG (MainThread) [xknx.knx] Sending: <KNXIPFrame <KNXIPHeader HeaderLength="6" ProtocolVersion="16" KNXIPServiceType="KNXIPServiceType.TUNNELLING_ACK" Reserve="0" TotalLength="10" />
1316 body="<TunnellingAck communication_channel_id="17" sequence_counter="58" status_code="ErrorCode.E_NO_ERROR" />" />
13172020-10-30 11:16:01 DEBUG (MainThread) [xknx.telegram] <Telegram group_address="GroupAddress("5/0/12")", payload="<DPTBinary value="0" />" telegramtype="TelegramType.GROUP_WRITE" direction="TelegramDirection.INCOMING" />
13182020-10-30 11:16:04 DEBUG (MainThread) [xknx.knx] Sending: <KNXIPFrame <KNXIPHeader HeaderLength="6" ProtocolVersion="16" KNXIPServiceType="KNXIPServiceType.CONNECTIONSTATE_REQUEST" Reserve="0" TotalLength="16" />
1319 body="<ConnectionStateRequest CommunicationChannelID="17", control_endpoint="<HPAI 10.58.60.89:35606 />" />" />
13202020-10-30 11:16:04 DEBUG (MainThread) [xknx.raw_socket] Received from ('10.58.60.11', 3671): 0610020800081100
13212020-10-30 11:16:04 DEBUG (MainThread) [xknx.knx] Received: <KNXIPFrame <KNXIPHeader HeaderLength="6" ProtocolVersion="16" KNXIPServiceType="KNXIPServiceType.CONNECTIONSTATE_RESPONSE" Reserve="0" TotalLength="8" />
1322 body="<ConnectionStateResponse CommunicationChannelID="17" status_code="ErrorCode.E_NO_ERROR" />" />
13232020-10-30 11:16:05 INFO (MainThread) [homeassistant.components.automation.4_1_0_sync_state_switch_tv_front_end_with_reality] 4.1.0 Sync state switch tv front-end with reality: Running automation actions
13242020-10-30 11:16:05 INFO (MainThread) [homeassistant.components.automation.4_1_0_sync_state_switch_tv_front_end_with_reality] 4.1.0 Sync state switch tv front-end with reality: Executing step call service
13252020-10-30 11:16:05 INFO (MainThread) [homeassistant.components.system_log.external] 4.1.0 The state of Ping 10.58.60.16 binary_sensor.ping_10_58_60_16 changed from on to on
13262020-10-30 11:16:05 INFO (MainThread) [homeassistant.components.automation.4_1_0_sync_state_switch_tv_front_end_with_reality] 4.1.0 Sync state switch tv front-end with reality: Executing step call service
13272020-10-30 11:16:05 INFO (SyncWorker_48) [homeassistant.components.python_script] Executing set_state.py: {'entity_id': 'switch.tv_toggle', 'state': 'on'}
13282020-10-30 11:16:05 INFO (SyncWorker_48) [homeassistant.components.python_script.set_state.py] switch.tv_toggle: state> on
13292020-10-30 11:16:10 INFO (MainThread) [homeassistant.components.automation.4_1_0_sync_state_switch_tv_front_end_with_reality] 4.1.0 Sync state switch tv front-end with reality: Running automation actions
13302020-10-30 11:16:10 INFO (MainThread) [homeassistant.components.automation.4_1_0_sync_state_switch_tv_front_end_with_reality] 4.1.0 Sync state switch tv front-end with reality: Executing step call service
13312020-10-30 11:16:10 INFO (MainThread) [homeassistant.components.system_log.external] 4.1.0 The state of Ping 10.58.60.16 binary_sensor.ping_10_58_60_16 changed from on to on
13322020-10-30 11:16:10 INFO (MainThread) [homeassistant.components.automation.4_1_0_sync_state_switch_tv_front_end_with_reality] 4.1.0 Sync state switch tv front-end with reality: Executing step call service
13332020-10-30 11:16:10 INFO (SyncWorker_50) [homeassistant.components.python_script] Executing set_state.py: {'entity_id': 'switch.tv_toggle', 'state': 'on'}
13342020-10-30 11:16:10 INFO (SyncWorker_50) [homeassistant.components.python_script.set_state.py] switch.tv_toggle: state> on
13352020-10-30 11:16:11 INFO (MainThread) [custom_components.visonic.pyvisonic] [data receiver] *** Received validated message 0XA5 ***
13362020-10-30 11:16:15 DEBUG (MainThread) [xknx.raw_socket] Received from ('10.58.60.11', 3671): 06100420001704113b002900bce0110328010300801ca9
13372020-10-30 11:16:15 DEBUG (MainThread) [xknx.knx] Received: <KNXIPFrame <KNXIPHeader HeaderLength="6" ProtocolVersion="16" KNXIPServiceType="KNXIPServiceType.TUNNELLING_REQUEST" Reserve="0" TotalLength="23" />
1338 body="<TunnellingRequest communication_channel_id="17" sequence_counter="59" cemi="<CEMIFrame SourceAddress="PhysicalAddress("1.1.3")" DestinationAddress="GroupAddress("5/0/1")" Flags="1011110011100000" Command="APCICommand.GROUP_WRITE" payload="<DPTArray value="[0x1c,0xa9]" />" />" />" />
13392020-10-30 11:16:15 DEBUG (MainThread) [xknx.knx] Sending: <KNXIPFrame <KNXIPHeader HeaderLength="6" ProtocolVersion="16" KNXIPServiceType="KNXIPServiceType.TUNNELLING_ACK" Reserve="0" TotalLength="10" />
1340 body="<TunnellingAck communication_channel_id="17" sequence_counter="59" status_code="ErrorCode.E_NO_ERROR" />" />
13412020-10-30 11:16:15 DEBUG (MainThread) [xknx.telegram] <Telegram group_address="GroupAddress("5/0/1")", payload="<DPTArray value="[0x1c,0xa9]" />" telegramtype="TelegramType.GROUP_WRITE" direction="TelegramDirection.INCOMING" />
13422020-10-30 11:16:15 INFO (MainThread) [homeassistant.components.automation.4_1_0_sync_state_switch_tv_front_end_with_reality] 4.1.0 Sync state switch tv front-end with reality: Running automation actions
13432020-10-30 11:16:15 INFO (MainThread) [homeassistant.components.automation.4_1_0_sync_state_switch_tv_front_end_with_reality] 4.1.0 Sync state switch tv front-end with reality: Executing step call service
13442020-10-30 11:16:15 INFO (MainThread) [homeassistant.components.system_log.external] 4.1.0 The state of Ping 10.58.60.16 binary_sensor.ping_10_58_60_16 changed from on to on
13452020-10-30 11:16:15 INFO (MainThread) [homeassistant.components.automation.4_1_0_sync_state_switch_tv_front_end_with_reality] 4.1.0 Sync state switch tv front-end with reality: Executing step call service
13462020-10-30 11:16:15 INFO (SyncWorker_49) [homeassistant.components.python_script] Executing set_state.py: {'entity_id': 'switch.tv_toggle', 'state': 'on'}
13472020-10-30 11:16:15 INFO (SyncWorker_49) [homeassistant.components.python_script.set_state.py] switch.tv_toggle: state> on
13482020-10-30 11:16:16 DEBUG (MainThread) [xknx.raw_socket] Received from ('10.58.60.11', 3671): 06100420001504113c002900bce01109280c010081
13492020-10-30 11:16:16 DEBUG (MainThread) [xknx.knx] Received: <KNXIPFrame <KNXIPHeader HeaderLength="6" ProtocolVersion="16" KNXIPServiceType="KNXIPServiceType.TUNNELLING_REQUEST" Reserve="0" TotalLength="21" />
1350 body="<TunnellingRequest communication_channel_id="17" sequence_counter="60" cemi="<CEMIFrame SourceAddress="PhysicalAddress("1.1.9")" DestinationAddress="GroupAddress("5/0/12")" Flags="1011110011100000" Command="APCICommand.GROUP_WRITE" payload="<DPTBinary value="1" />" />" />" />
13512020-10-30 11:16:16 DEBUG (MainThread) [xknx.knx] Sending: <KNXIPFrame <KNXIPHeader HeaderLength="6" ProtocolVersion="16" KNXIPServiceType="KNXIPServiceType.TUNNELLING_ACK" Reserve="0" TotalLength="10" />
1352 body="<TunnellingAck communication_channel_id="17" sequence_counter="60" status_code="ErrorCode.E_NO_ERROR" />" />
13532020-10-30 11:16:16 DEBUG (MainThread) [xknx.telegram] <Telegram group_address="GroupAddress("5/0/12")", payload="<DPTBinary value="1" />" telegramtype="TelegramType.GROUP_WRITE" direction="TelegramDirection.INCOMING" />
13542020-10-30 11:16:18 INFO (MainThread) [homeassistant.components.automation.7_0_1_washing_machine_ready_state] 7.0.1 Washing Machine - ready state: Running automation actions
13552020-10-30 11:16:18 INFO (MainThread) [homeassistant.components.automation.7_0_1_washing_machine_ready_state] 7.0.1 Washing Machine - ready state: Executing step call service
13562020-10-30 11:16:19 INFO (MainThread) [custom_components.visonic.pyvisonic] [data receiver] *** Received validated message 0XAB ***
13572020-10-30 11:16:19 INFO (MainThread) [custom_components.visonic.pyvisonic] [handle_msgtypeAB] ***************************** Got PowerLink Keep-Alive ****************************
13582020-10-30 11:16:19 INFO (MainThread) [custom_components.visonic.pyvisonic] =============================================== Display Status ===============================================
13592020-10-30 11:16:19 INFO (MainThread) [custom_components.visonic.pyvisonic]      key 0  Sensor id=1  dname=Z01  stype=Magnet   zname=Front door     ztypeName=Delay 1    ztamper=0  ztrip=0  bypass=0  lowbatt=0  status=0  tamper=0  enrolled=1  triggered=0 
13602020-10-30 11:16:19 INFO (MainThread) [custom_components.visonic.pyvisonic]      key 1  Sensor id=2  dname=Z02  stype=Motion   zname=Hall           ztypeName=Delay 1    ztamper=0  ztrip=0  bypass=0  lowbatt=0  status=0  tamper=0  enrolled=1  triggered=0 
13612020-10-30 11:16:19 INFO (MainThread) [custom_components.visonic.pyvisonic]      key 2  Sensor id=3  dname=Z03  stype=Motion   zname=Dining room    ztypeName=Perimeter  ztamper=0  ztrip=0  bypass=0  lowbatt=0  status=0  tamper=0  enrolled=1  triggered=0 
13622020-10-30 11:16:19 INFO (MainThread) [custom_components.visonic.pyvisonic]      key 3  Sensor id=4  dname=Z04  stype=Motion   zname=Living room    ztypeName=Perimeter  ztamper=0  ztrip=0  bypass=0  lowbatt=0  status=0  tamper=0  enrolled=1  triggered=0 
13632020-10-30 11:16:19 INFO (MainThread) [custom_components.visonic.pyvisonic]    Model PowerMax Pro           PowerMaster No                     LastEvent None                   Ready   Yes          
13642020-10-30 11:16:19 INFO (MainThread) [custom_components.visonic.pyvisonic]    Mode  Powerlink              Status      Disarmed               Armed     No                     Trouble None              AlarmStatus None        
13652020-10-30 11:16:19 INFO (MainThread) [custom_components.visonic.pyvisonic] ==============================================================================================================
13662020-10-30 11:16:19 DEBUG (MainThread) [xknx.raw_socket] Received from ('10.58.60.11', 3671): 06100420001504113d002900bce01109280c010080
13672020-10-30 11:16:19 DEBUG (MainThread) [xknx.knx] Received: <KNXIPFrame <KNXIPHeader HeaderLength="6" ProtocolVersion="16" KNXIPServiceType="KNXIPServiceType.TUNNELLING_REQUEST" Reserve="0" TotalLength="21" />
1368 body="<TunnellingRequest communication_channel_id="17" sequence_counter="61" cemi="<CEMIFrame SourceAddress="PhysicalAddress("1.1.9")" DestinationAddress="GroupAddress("5/0/12")" Flags="1011110011100000" Command="APCICommand.GROUP_WRITE" payload="<DPTBinary value="0" />" />" />" />
13692020-10-30 11:16:19 DEBUG (MainThread) [xknx.knx] Sending: <KNXIPFrame <KNXIPHeader HeaderLength="6" ProtocolVersion="16" KNXIPServiceType="KNXIPServiceType.TUNNELLING_ACK" Reserve="0" TotalLength="10" />
1370 body="<TunnellingAck communication_channel_id="17" sequence_counter="61" status_code="ErrorCode.E_NO_ERROR" />" />
13712020-10-30 11:16:19 DEBUG (MainThread) [xknx.telegram] <Telegram group_address="GroupAddress("5/0/12")", payload="<DPTBinary value="0" />" telegramtype="TelegramType.GROUP_WRITE" direction="TelegramDirection.INCOMING" />
13722020-10-30 11:16:19 DEBUG (MainThread) [xknx.knx] Sending: <KNXIPFrame <KNXIPHeader HeaderLength="6" ProtocolVersion="16" KNXIPServiceType="KNXIPServiceType.CONNECTIONSTATE_REQUEST" Reserve="0" TotalLength="16" />
1373 body="<ConnectionStateRequest CommunicationChannelID="17", control_endpoint="<HPAI 10.58.60.89:35606 />" />" />
13742020-10-30 11:16:19 DEBUG (MainThread) [xknx.raw_socket] Received from ('10.58.60.11', 3671): 0610020800081100
13752020-10-30 11:16:19 DEBUG (MainThread) [xknx.knx] Received: <KNXIPFrame <KNXIPHeader HeaderLength="6" ProtocolVersion="16" KNXIPServiceType="KNXIPServiceType.CONNECTIONSTATE_RESPONSE" Reserve="0" TotalLength="8" />
1376 body="<ConnectionStateResponse CommunicationChannelID="17" status_code="ErrorCode.E_NO_ERROR" />" />
13772020-10-30 11:16:20 INFO (MainThread) [homeassistant.components.automation.4_1_0_sync_state_switch_tv_front_end_with_reality] 4.1.0 Sync state switch tv front-end with reality: Running automation actions
13782020-10-30 11:16:20 INFO (MainThread) [homeassistant.components.automation.4_1_0_sync_state_switch_tv_front_end_with_reality] 4.1.0 Sync state switch tv front-end with reality: Executing step call service
13792020-10-30 11:16:20 INFO (MainThread) [homeassistant.components.system_log.external] 4.1.0 The state of Ping 10.58.60.16 binary_sensor.ping_10_58_60_16 changed from on to on
13802020-10-30 11:16:20 INFO (MainThread) [homeassistant.components.automation.4_1_0_sync_state_switch_tv_front_end_with_reality] 4.1.0 Sync state switch tv front-end with reality: Executing step call service
13812020-10-30 11:16:20 INFO (SyncWorker_52) [homeassistant.components.python_script] Executing set_state.py: {'entity_id': 'switch.tv_toggle', 'state': 'on'}
13822020-10-30 11:16:20 INFO (SyncWorker_52) [homeassistant.components.python_script.set_state.py] switch.tv_toggle: state> on
13832020-10-30 11:16:24 DEBUG (MainThread) [xknx.raw_socket] Received from ('10.58.60.11', 3671): 06100420001504113e002900bce01109280c010081
13842020-10-30 11:16:24 DEBUG (MainThread) [xknx.knx] Received: <KNXIPFrame <KNXIPHeader HeaderLength="6" ProtocolVersion="16" KNXIPServiceType="KNXIPServiceType.TUNNELLING_REQUEST" Reserve="0" TotalLength="21" />
1385 body="<TunnellingRequest communication_channel_id="17" sequence_counter="62" cemi="<CEMIFrame SourceAddress="PhysicalAddress("1.1.9")" DestinationAddress="GroupAddress("5/0/12")" Flags="1011110011100000" Command="APCICommand.GROUP_WRITE" payload="<DPTBinary value="1" />" />" />" />
13862020-10-30 11:16:24 DEBUG (MainThread) [xknx.knx] Sending: <KNXIPFrame <KNXIPHeader HeaderLength="6" ProtocolVersion="16" KNXIPServiceType="KNXIPServiceType.TUNNELLING_ACK" Reserve="0" TotalLength="10" />
1387 body="<TunnellingAck communication_channel_id="17" sequence_counter="62" status_code="ErrorCode.E_NO_ERROR" />" />
13882020-10-30 11:16:24 DEBUG (MainThread) [xknx.telegram] <Telegram group_address="GroupAddress("5/0/12")", payload="<DPTBinary value="1" />" telegramtype="TelegramType.GROUP_WRITE" direction="TelegramDirection.INCOMING" />
13892020-10-30 11:16:25 INFO (MainThread) [homeassistant.components.automation.4_1_0_sync_state_switch_tv_front_end_with_reality] 4.1.0 Sync state switch tv front-end with reality: Running automation actions
13902020-10-30 11:16:25 INFO (MainThread) [homeassistant.components.automation.4_1_0_sync_state_switch_tv_front_end_with_reality] 4.1.0 Sync state switch tv front-end with reality: Executing step call service
13912020-10-30 11:16:25 INFO (MainThread) [homeassistant.components.system_log.external] 4.1.0 The state of Ping 10.58.60.16 binary_sensor.ping_10_58_60_16 changed from on to on
13922020-10-30 11:16:25 INFO (MainThread) [homeassistant.components.automation.4_1_0_sync_state_switch_tv_front_end_with_reality] 4.1.0 Sync state switch tv front-end with reality: Executing step call service
13932020-10-30 11:16:25 INFO (SyncWorker_31) [homeassistant.components.python_script] Executing set_state.py: {'entity_id': 'switch.tv_toggle', 'state': 'on'}
13942020-10-30 11:16:25 INFO (SyncWorker_31) [homeassistant.components.python_script.set_state.py] switch.tv_toggle: state> on
13952020-10-30 11:16:27 DEBUG (MainThread) [xknx.raw_socket] Received from ('10.58.60.11', 3671): 06100420001704113f002900bce01109280a0300801e6a
13962020-10-30 11:16:27 DEBUG (MainThread) [xknx.knx] Received: <KNXIPFrame <KNXIPHeader HeaderLength="6" ProtocolVersion="16" KNXIPServiceType="KNXIPServiceType.TUNNELLING_REQUEST" Reserve="0" TotalLength="23" />
1397 body="<TunnellingRequest communication_channel_id="17" sequence_counter="63" cemi="<CEMIFrame SourceAddress="PhysicalAddress("1.1.9")" DestinationAddress="GroupAddress("5/0/10")" Flags="1011110011100000" Command="APCICommand.GROUP_WRITE" payload="<DPTArray value="[0x1e,0x6a]" />" />" />" />
13982020-10-30 11:16:27 DEBUG (MainThread) [xknx.knx] Sending: <KNXIPFrame <KNXIPHeader HeaderLength="6" ProtocolVersion="16" KNXIPServiceType="KNXIPServiceType.TUNNELLING_ACK" Reserve="0" TotalLength="10" />
1399 body="<TunnellingAck communication_channel_id="17" sequence_counter="63" status_code="ErrorCode.E_NO_ERROR" />" />
14002020-10-30 11:16:27 DEBUG (MainThread) [xknx.telegram] <Telegram group_address="GroupAddress("5/0/10")", payload="<DPTArray value="[0x1e,0x6a]" />" telegramtype="TelegramType.GROUP_WRITE" direction="TelegramDirection.INCOMING" />
14012020-10-30 11:16:27 INFO (MainThread) [custom_components.visonic.pyvisonic] [data receiver] *** Received validated message 0XA5 ***
14022020-10-30 11:16:27 INFO (MainThread) [homeassistant.components.automation.6_3_0_switch_to_off_input_boolean_en_restart_timer_to_delay_switch_tv_als_niemand_in_woonkamer] 6.3.0 Switch to Off Input_Boolean en Restart Timer to Delay Switch TV Als niemand in woonkamer: Running automation actions
14032020-10-30 11:16:27 INFO (MainThread) [homeassistant.components.automation.6_3_0_switch_to_off_input_boolean_en_restart_timer_to_delay_switch_tv_als_niemand_in_woonkamer] 6.3.0 Switch to Off Input_Boolean en Restart Timer to Delay Switch TV Als niemand in woonkamer: Executing step call service
14042020-10-30 11:16:27 INFO (MainThread) [homeassistant.components.automation.6_3_0_switch_to_off_input_boolean_en_restart_timer_to_delay_switch_tv_als_niemand_in_woonkamer] 6.3.0 Switch to Off Input_Boolean en Restart Timer to Delay Switch TV Als niemand in woonkamer: Executing step call service
14052020-10-30 11:16:27 INFO (MainThread) [homeassistant.components.automation.6_3_0_switch_to_off_input_boolean_en_restart_timer_to_delay_switch_tv_als_niemand_in_woonkamer] 6.3.0 Switch to Off Input_Boolean en Restart Timer to Delay Switch TV Als niemand in woonkamer: Executing step call service
14062020-10-30 11:16:27 INFO (MainThread) [homeassistant.components.automation.6_3_0_switch_to_off_input_boolean_en_restart_timer_to_delay_switch_tv_als_niemand_in_woonkamer] 6.3.0 Switch to Off Input_Boolean en Restart Timer to Delay Switch TV Als niemand in woonkamer: Executing step call service
14072020-10-30 11:16:27 WARNING (MainThread) [homeassistant.components.system_log.external] The state of visonic_z04 binary_sensor.visonic_z04 changed from off to on. The entity binary_sensor.visonic_z04 moved to timer.start
14082020-10-30 11:16:28 DEBUG (MainThread) [xknx.raw_socket] Received from ('10.58.60.11', 3671): 061004200015041140002900bce01109280c010080
14092020-10-30 11:16:28 DEBUG (MainThread) [xknx.knx] Received: <KNXIPFrame <KNXIPHeader HeaderLength="6" ProtocolVersion="16" KNXIPServiceType="KNXIPServiceType.TUNNELLING_REQUEST" Reserve="0" TotalLength="21" />
1410 body="<TunnellingRequest communication_channel_id="17" sequence_counter="64" cemi="<CEMIFrame SourceAddress="PhysicalAddress("1.1.9")" DestinationAddress="GroupAddress("5/0/12")" Flags="1011110011100000" Command="APCICommand.GROUP_WRITE" payload="<DPTBinary value="0" />" />" />" />
14112020-10-30 11:16:28 DEBUG (MainThread) [xknx.knx] Sending: <KNXIPFrame <KNXIPHeader HeaderLength="6" ProtocolVersion="16" KNXIPServiceType="KNXIPServiceType.TUNNELLING_ACK" Reserve="0" TotalLength="10" />
1412 body="<TunnellingAck communication_channel_id="17" sequence_counter="64" status_code="ErrorCode.E_NO_ERROR" />" />
14132020-10-30 11:16:28 DEBUG (MainThread) [xknx.telegram] <Telegram group_address="GroupAddress("5/0/12")", payload="<DPTBinary value="0" />" telegramtype="TelegramType.GROUP_WRITE" direction="TelegramDirection.INCOMING" />
14142020-10-30 11:16:30 DEBUG (MainThread) [xknx.raw_socket] Received from ('10.58.60.11', 3671): 061004200017041141002900bce01109280a0300801ddd
14152020-10-30 11:16:30 DEBUG (MainThread) [xknx.knx] Received: <KNXIPFrame <KNXIPHeader HeaderLength="6" ProtocolVersion="16" KNXIPServiceType="KNXIPServiceType.TUNNELLING_REQUEST" Reserve="0" TotalLength="23" />
1416 body="<TunnellingRequest communication_channel_id="17" sequence_counter="65" cemi="<CEMIFrame SourceAddress="PhysicalAddress("1.1.9")" DestinationAddress="GroupAddress("5/0/10")" Flags="1011110011100000" Command="APCICommand.GROUP_WRITE" payload="<DPTArray value="[0x1d,0xdd]" />" />" />" />
14172020-10-30 11:16:30 DEBUG (MainThread) [xknx.knx] Sending: <KNXIPFrame <KNXIPHeader HeaderLength="6" ProtocolVersion="16" KNXIPServiceType="KNXIPServiceType.TUNNELLING_ACK" Reserve="0" TotalLength="10" />
1418 body="<TunnellingAck communication_channel_id="17" sequence_counter="65" status_code="ErrorCode.E_NO_ERROR" />" />
14192020-10-30 11:16:30 DEBUG (MainThread) [xknx.telegram] <Telegram group_address="GroupAddress("5/0/10")", payload="<DPTArray value="[0x1d,0xdd]" />" telegramtype="TelegramType.GROUP_WRITE" direction="TelegramDirection.INCOMING" />
14202020-10-30 11:16:30 INFO (MainThread) [homeassistant.components.automation.4_1_0_sync_state_switch_tv_front_end_with_reality] 4.1.0 Sync state switch tv front-end with reality: Running automation actions
14212020-10-30 11:16:30 INFO (MainThread) [homeassistant.components.automation.4_1_0_sync_state_switch_tv_front_end_with_reality] 4.1.0 Sync state switch tv front-end with reality: Executing step call service
14222020-10-30 11:16:30 INFO (MainThread) [homeassistant.components.system_log.external] 4.1.0 The state of Ping 10.58.60.16 binary_sensor.ping_10_58_60_16 changed from on to on
14232020-10-30 11:16:30 INFO (MainThread) [homeassistant.components.automation.4_1_0_sync_state_switch_tv_front_end_with_reality] 4.1.0 Sync state switch tv front-end with reality: Executing step call service
14242020-10-30 11:16:30 INFO (SyncWorker_20) [homeassistant.components.python_script] Executing set_state.py: {'entity_id': 'switch.tv_toggle', 'state': 'on'}
14252020-10-30 11:16:30 INFO (SyncWorker_20) [homeassistant.components.python_script.set_state.py] switch.tv_toggle: state> on
14262020-10-30 11:16:32 DEBUG (MainThread) [xknx.raw_socket] Received from ('10.58.60.11', 3671): 061004200015041142002900bce01109280c010081
14272020-10-30 11:16:32 DEBUG (MainThread) [xknx.knx] Received: <KNXIPFrame <KNXIPHeader HeaderLength="6" ProtocolVersion="16" KNXIPServiceType="KNXIPServiceType.TUNNELLING_REQUEST" Reserve="0" TotalLength="21" />
1428 body="<TunnellingRequest communication_channel_id="17" sequence_counter="66" cemi="<CEMIFrame SourceAddress="PhysicalAddress("1.1.9")" DestinationAddress="GroupAddress("5/0/12")" Flags="1011110011100000" Command="APCICommand.GROUP_WRITE" payload="<DPTBinary value="1" />" />" />" />
14292020-10-30 11:16:32 DEBUG (MainThread) [xknx.knx] Sending: <KNXIPFrame <KNXIPHeader HeaderLength="6" ProtocolVersion="16" KNXIPServiceType="KNXIPServiceType.TUNNELLING_ACK" Reserve="0" TotalLength="10" />
1430 body="<TunnellingAck communication_channel_id="17" sequence_counter="66" status_code="ErrorCode.E_NO_ERROR" />" />
14312020-10-30 11:16:32 DEBUG (MainThread) [xknx.telegram] <Telegram group_address="GroupAddress("5/0/12")", payload="<DPTBinary value="1" />" telegramtype="TelegramType.GROUP_WRITE" direction="TelegramDirection.INCOMING" />
14322020-10-30 11:16:32 DEBUG (MainThread) [xknx.raw_socket] Received from ('10.58.60.11', 3671): 061004200017041143002900bce01109280a0300801e5c
14332020-10-30 11:16:32 DEBUG (MainThread) [xknx.knx] Received: <KNXIPFrame <KNXIPHeader HeaderLength="6" ProtocolVersion="16" KNXIPServiceType="KNXIPServiceType.TUNNELLING_REQUEST" Reserve="0" TotalLength="23" />
1434 body="<TunnellingRequest communication_channel_id="17" sequence_counter="67" cemi="<CEMIFrame SourceAddress="PhysicalAddress("1.1.9")" DestinationAddress="GroupAddress("5/0/10")" Flags="1011110011100000" Command="APCICommand.GROUP_WRITE" payload="<DPTArray value="[0x1e,0x5c]" />" />" />" />
14352020-10-30 11:16:32 DEBUG (MainThread) [xknx.knx] Sending: <KNXIPFrame <KNXIPHeader HeaderLength="6" ProtocolVersion="16" KNXIPServiceType="KNXIPServiceType.TUNNELLING_ACK" Reserve="0" TotalLength="10" />
1436 body="<TunnellingAck communication_channel_id="17" sequence_counter="67" status_code="ErrorCode.E_NO_ERROR" />" />
14372020-10-30 11:16:32 DEBUG (MainThread) [xknx.telegram] <Telegram group_address="GroupAddress("5/0/10")", payload="<DPTArray value="[0x1e,0x5c]" />" telegramtype="TelegramType.GROUP_WRITE" direction="TelegramDirection.INCOMING" />
14382020-10-30 11:16:34 DEBUG (MainThread) [xknx.knx] Sending: <KNXIPFrame <KNXIPHeader HeaderLength="6" ProtocolVersion="16" KNXIPServiceType="KNXIPServiceType.CONNECTIONSTATE_REQUEST" Reserve="0" TotalLength="16" />
1439 body="<ConnectionStateRequest CommunicationChannelID="17", control_endpoint="<HPAI 10.58.60.89:35606 />" />" />
14402020-10-30 11:16:34 DEBUG (MainThread) [xknx.raw_socket] Received from ('10.58.60.11', 3671): 0610020800081100
14412020-10-30 11:16:34 DEBUG (MainThread) [xknx.knx] Received: <KNXIPFrame <KNXIPHeader HeaderLength="6" ProtocolVersion="16" KNXIPServiceType="KNXIPServiceType.CONNECTIONSTATE_RESPONSE" Reserve="0" TotalLength="8" />
1442 body="<ConnectionStateResponse CommunicationChannelID="17" status_code="ErrorCode.E_NO_ERROR" />" />
14432020-10-30 11:16:35 DEBUG (MainThread) [xknx.raw_socket] Received from ('10.58.60.11', 3671): 061004200015041144002900bce01109280c010080
14442020-10-30 11:16:35 DEBUG (MainThread) [xknx.knx] Received: <KNXIPFrame <KNXIPHeader HeaderLength="6" ProtocolVersion="16" KNXIPServiceType="KNXIPServiceType.TUNNELLING_REQUEST" Reserve="0" TotalLength="21" />
1445 body="<TunnellingRequest communication_channel_id="17" sequence_counter="68" cemi="<CEMIFrame SourceAddress="PhysicalAddress("1.1.9")" DestinationAddress="GroupAddress("5/0/12")" Flags="1011110011100000" Command="APCICommand.GROUP_WRITE" payload="<DPTBinary value="0" />" />" />" />
14462020-10-30 11:16:35 DEBUG (MainThread) [xknx.knx] Sending: <KNXIPFrame <KNXIPHeader HeaderLength="6" ProtocolVersion="16" KNXIPServiceType="KNXIPServiceType.TUNNELLING_ACK" Reserve="0" TotalLength="10" />
1447 body="<TunnellingAck communication_channel_id="17" sequence_counter="68" status_code="ErrorCode.E_NO_ERROR" />" />
14482020-10-30 11:16:35 DEBUG (MainThread) [xknx.telegram] <Telegram group_address="GroupAddress("5/0/12")", payload="<DPTBinary value="0" />" telegramtype="TelegramType.GROUP_WRITE" direction="TelegramDirection.INCOMING" />
14492020-10-30 11:16:35 INFO (MainThread) [homeassistant.components.automation.4_1_0_sync_state_switch_tv_front_end_with_reality] 4.1.0 Sync state switch tv front-end with reality: Running automation actions
14502020-10-30 11:16:35 INFO (MainThread) [homeassistant.components.automation.4_1_0_sync_state_switch_tv_front_end_with_reality] 4.1.0 Sync state switch tv front-end with reality: Executing step call service
14512020-10-30 11:16:35 INFO (MainThread) [homeassistant.components.system_log.external] 4.1.0 The state of Ping 10.58.60.16 binary_sensor.ping_10_58_60_16 changed from on to on
14522020-10-30 11:16:35 DEBUG (MainThread) [xknx.raw_socket] Received from ('10.58.60.11', 3671): 061004200017041145002900bce01108280903008007d0
14532020-10-30 11:16:35 DEBUG (MainThread) [xknx.knx] Received: <KNXIPFrame <KNXIPHeader HeaderLength="6" ProtocolVersion="16" KNXIPServiceType="KNXIPServiceType.TUNNELLING_REQUEST" Reserve="0" TotalLength="23" />
1454 body="<TunnellingRequest communication_channel_id="17" sequence_counter="69" cemi="<CEMIFrame SourceAddress="PhysicalAddress("1.1.8")" DestinationAddress="GroupAddress("5/0/9")" Flags="1011110011100000" Command="APCICommand.GROUP_WRITE" payload="<DPTArray value="[0x7,0xd0]" />" />" />" />
14552020-10-30 11:16:35 DEBUG (MainThread) [xknx.knx] Sending: <KNXIPFrame <KNXIPHeader HeaderLength="6" ProtocolVersion="16" KNXIPServiceType="KNXIPServiceType.TUNNELLING_ACK" Reserve="0" TotalLength="10" />
1456 body="<TunnellingAck communication_channel_id="17" sequence_counter="69" status_code="ErrorCode.E_NO_ERROR" />" />
14572020-10-30 11:16:35 DEBUG (MainThread) [xknx.telegram] <Telegram group_address="GroupAddress("5/0/9")", payload="<DPTArray value="[0x7,0xd0]" />" telegramtype="TelegramType.GROUP_WRITE" direction="TelegramDirection.INCOMING" />
14582020-10-30 11:16:35 INFO (MainThread) [homeassistant.components.automation.4_1_0_sync_state_switch_tv_front_end_with_reality] 4.1.0 Sync state switch tv front-end with reality: Executing step call service
14592020-10-30 11:16:35 INFO (SyncWorker_19) [homeassistant.components.python_script] Executing set_state.py: {'entity_id': 'switch.tv_toggle', 'state': 'on'}
14602020-10-30 11:16:35 INFO (SyncWorker_19) [homeassistant.components.python_script.set_state.py] switch.tv_toggle: state> on
14612020-10-30 11:16:37 DEBUG (MainThread) [xknx.raw_socket] Received from ('10.58.60.11', 3671): 061004200017041146002900bce0110728050300801ce3
14622020-10-30 11:16:37 DEBUG (MainThread) [xknx.knx] Received: <KNXIPFrame <KNXIPHeader HeaderLength="6" ProtocolVersion="16" KNXIPServiceType="KNXIPServiceType.TUNNELLING_REQUEST" Reserve="0" TotalLength="23" />
1463 body="<TunnellingRequest communication_channel_id="17" sequence_counter="70" cemi="<CEMIFrame SourceAddress="PhysicalAddress("1.1.7")" DestinationAddress="GroupAddress("5/0/5")" Flags="1011110011100000" Command="APCICommand.GROUP_WRITE" payload="<DPTArray value="[0x1c,0xe3]" />" />" />" />
14642020-10-30 11:16:37 DEBUG (MainThread) [xknx.knx] Sending: <KNXIPFrame <KNXIPHeader HeaderLength="6" ProtocolVersion="16" KNXIPServiceType="KNXIPServiceType.TUNNELLING_ACK" Reserve="0" TotalLength="10" />
1465 body="<TunnellingAck communication_channel_id="17" sequence_counter="70" status_code="ErrorCode.E_NO_ERROR" />" />
14662020-10-30 11:16:37 DEBUG (MainThread) [xknx.telegram] <Telegram group_address="GroupAddress("5/0/5")", payload="<DPTArray value="[0x1c,0xe3]" />" telegramtype="TelegramType.GROUP_WRITE" direction="TelegramDirection.INCOMING" />
14672020-10-30 11:16:40 INFO (MainThread) [homeassistant.components.automation.4_1_0_sync_state_switch_tv_front_end_with_reality] 4.1.0 Sync state switch tv front-end with reality: Running automation actions
14682020-10-30 11:16:40 INFO (MainThread) [homeassistant.components.automation.4_1_0_sync_state_switch_tv_front_end_with_reality] 4.1.0 Sync state switch tv front-end with reality: Executing step call service
14692020-10-30 11:16:40 INFO (MainThread) [homeassistant.components.system_log.external] 4.1.0 The state of Ping 10.58.60.16 binary_sensor.ping_10_58_60_16 changed from on to on
14702020-10-30 11:16:40 INFO (MainThread) [homeassistant.components.automation.4_1_0_sync_state_switch_tv_front_end_with_reality] 4.1.0 Sync state switch tv front-end with reality: Executing step call service
14712020-10-30 11:16:40 INFO (SyncWorker_21) [homeassistant.components.python_script] Executing set_state.py: {'entity_id': 'switch.tv_toggle', 'state': 'on'}
14722020-10-30 11:16:40 INFO (SyncWorker_21) [homeassistant.components.python_script.set_state.py] switch.tv_toggle: state> on
14732020-10-30 11:16:45 INFO (MainThread) [homeassistant.components.automation.4_1_0_sync_state_switch_tv_front_end_with_reality] 4.1.0 Sync state switch tv front-end with reality: Running automation actions
14742020-10-30 11:16:45 INFO (MainThread) [homeassistant.components.automation.4_1_0_sync_state_switch_tv_front_end_with_reality] 4.1.0 Sync state switch tv front-end with reality: Executing step call service
14752020-10-30 11:16:45 INFO (MainThread) [homeassistant.components.system_log.external] 4.1.0 The state of Ping 10.58.60.16 binary_sensor.ping_10_58_60_16 changed from on to on
14762020-10-30 11:16:45 INFO (MainThread) [homeassistant.components.automation.4_1_0_sync_state_switch_tv_front_end_with_reality] 4.1.0 Sync state switch tv front-end with reality: Executing step call service
14772020-10-30 11:16:45 INFO (SyncWorker_36) [homeassistant.components.python_script] Executing set_state.py: {'entity_id': 'switch.tv_toggle', 'state': 'on'}
14782020-10-30 11:16:45 INFO (SyncWorker_36) [homeassistant.components.python_script.set_state.py] switch.tv_toggle: state> on
14792020-10-30 11:16:49 INFO (MainThread) [custom_components.visonic.pyvisonic] [data receiver] *** Received validated message 0XAB ***
14802020-10-30 11:16:49 INFO (MainThread) [custom_components.visonic.pyvisonic] [handle_msgtypeAB] ***************************** Got PowerLink Keep-Alive ****************************
14812020-10-30 11:16:49 INFO (MainThread) [custom_components.visonic.pyvisonic] =============================================== Display Status ===============================================
14822020-10-30 11:16:49 INFO (MainThread) [custom_components.visonic.pyvisonic]      key 0  Sensor id=1  dname=Z01  stype=Magnet   zname=Front door     ztypeName=Delay 1    ztamper=0  ztrip=0  bypass=0  lowbatt=0  status=0  tamper=0  enrolled=1  triggered=0 
14832020-10-30 11:16:49 INFO (MainThread) [custom_components.visonic.pyvisonic]      key 1  Sensor id=2  dname=Z02  stype=Motion   zname=Hall           ztypeName=Delay 1    ztamper=0  ztrip=0  bypass=0  lowbatt=0  status=0  tamper=0  enrolled=1  triggered=0 
14842020-10-30 11:16:49 INFO (MainThread) [custom_components.visonic.pyvisonic]      key 2  Sensor id=3  dname=Z03  stype=Motion   zname=Dining room    ztypeName=Perimeter  ztamper=0  ztrip=0  bypass=0  lowbatt=0  status=0  tamper=0  enrolled=1  triggered=0 
14852020-10-30 11:16:49 INFO (MainThread) [custom_components.visonic.pyvisonic]      key 3  Sensor id=4  dname=Z04  stype=Motion   zname=Living room    ztypeName=Perimeter  ztamper=0  ztrip=0  bypass=0  lowbatt=0  status=0  tamper=0  enrolled=1  triggered=1 
14862020-10-30 11:16:49 INFO (MainThread) [custom_components.visonic.pyvisonic]    Model PowerMax Pro           PowerMaster No                     LastEvent None                   Ready   Yes          
14872020-10-30 11:16:49 INFO (MainThread) [custom_components.visonic.pyvisonic]    Mode  Powerlink              Status      Disarmed               Armed     No                     Trouble None              AlarmStatus None        
14882020-10-30 11:16:49 INFO (MainThread) [custom_components.visonic.pyvisonic] ==============================================================================================================
14892020-10-30 11:16:49 DEBUG (MainThread) [xknx.knx] Sending: <KNXIPFrame <KNXIPHeader HeaderLength="6" ProtocolVersion="16" KNXIPServiceType="KNXIPServiceType.CONNECTIONSTATE_REQUEST" Reserve="0" TotalLength="16" />
1490 body="<ConnectionStateRequest CommunicationChannelID="17", control_endpoint="<HPAI 10.58.60.89:35606 />" />" />
14912020-10-30 11:16:49 DEBUG (MainThread) [xknx.raw_socket] Received from ('10.58.60.11', 3671): 0610020800081100
14922020-10-30 11:16:49 DEBUG (MainThread) [xknx.knx] Received: <KNXIPFrame <KNXIPHeader HeaderLength="6" ProtocolVersion="16" KNXIPServiceType="KNXIPServiceType.CONNECTIONSTATE_RESPONSE" Reserve="0" TotalLength="8" />
1493 body="<ConnectionStateResponse CommunicationChannelID="17" status_code="ErrorCode.E_NO_ERROR" />" />
14942020-10-30 11:16:50 INFO (MainThread) [homeassistant.components.automation.4_1_0_sync_state_switch_tv_front_end_with_reality] 4.1.0 Sync state switch tv front-end with reality: Running automation actions
14952020-10-30 11:16:50 INFO (MainThread) [homeassistant.components.automation.4_1_0_sync_state_switch_tv_front_end_with_reality] 4.1.0 Sync state switch tv front-end with reality: Executing step call service
14962020-10-30 11:16:50 INFO (MainThread) [homeassistant.components.system_log.external] 4.1.0 The state of Ping 10.58.60.16 binary_sensor.ping_10_58_60_16 changed from on to on
14972020-10-30 11:16:50 INFO (MainThread) [homeassistant.components.automation.4_1_0_sync_state_switch_tv_front_end_with_reality] 4.1.0 Sync state switch tv front-end with reality: Executing step call service
14982020-10-30 11:16:50 INFO (SyncWorker_26) [homeassistant.components.python_script] Executing set_state.py: {'entity_id': 'switch.tv_toggle', 'state': 'on'}
14992020-10-30 11:16:50 INFO (SyncWorker_26) [homeassistant.components.python_script.set_state.py] switch.tv_toggle: state> on
15002020-10-30 11:16:53 DEBUG (MainThread) [xknx.raw_socket] Received from ('10.58.60.11', 3671): 061004200015041147002900bce01109280c010081
15012020-10-30 11:16:53 DEBUG (MainThread) [xknx.knx] Received: <KNXIPFrame <KNXIPHeader HeaderLength="6" ProtocolVersion="16" KNXIPServiceType="KNXIPServiceType.TUNNELLING_REQUEST" Reserve="0" TotalLength="21" />
1502 body="<TunnellingRequest communication_channel_id="17" sequence_counter="71" cemi="<CEMIFrame SourceAddress="PhysicalAddress("1.1.9")" DestinationAddress="GroupAddress("5/0/12")" Flags="1011110011100000" Command="APCICommand.GROUP_WRITE" payload="<DPTBinary value="1" />" />" />" />
15032020-10-30 11:16:53 DEBUG (MainThread) [xknx.knx] Sending: <KNXIPFrame <KNXIPHeader HeaderLength="6" ProtocolVersion="16" KNXIPServiceType="KNXIPServiceType.TUNNELLING_ACK" Reserve="0" TotalLength="10" />
1504 body="<TunnellingAck communication_channel_id="17" sequence_counter="71" status_code="ErrorCode.E_NO_ERROR" />" />
15052020-10-30 11:16:53 DEBUG (MainThread) [xknx.telegram] <Telegram group_address="GroupAddress("5/0/12")", payload="<DPTBinary value="1" />" telegramtype="TelegramType.GROUP_WRITE" direction="TelegramDirection.INCOMING" />
15062020-10-30 11:16:55 DEBUG (MainThread) [xknx.raw_socket] Received from ('10.58.60.11', 3671): 061004200015041148002900bce01109280c010080
15072020-10-30 11:16:55 DEBUG (MainThread) [xknx.knx] Received: <KNXIPFrame <KNXIPHeader HeaderLength="6" ProtocolVersion="16" KNXIPServiceType="KNXIPServiceType.TUNNELLING_REQUEST" Reserve="0" TotalLength="21" />
1508 body="<TunnellingRequest communication_channel_id="17" sequence_counter="72" cemi="<CEMIFrame SourceAddress="PhysicalAddress("1.1.9")" DestinationAddress="GroupAddress("5/0/12")" Flags="1011110011100000" Command="APCICommand.GROUP_WRITE" payload="<DPTBinary value="0" />" />" />" />
15092020-10-30 11:16:55 DEBUG (MainThread) [xknx.knx] Sending: <KNXIPFrame <KNXIPHeader HeaderLength="6" ProtocolVersion="16" KNXIPServiceType="KNXIPServiceType.TUNNELLING_ACK" Reserve="0" TotalLength="10" />
1510 body="<TunnellingAck communication_channel_id="17" sequence_counter="72" status_code="ErrorCode.E_NO_ERROR" />" />
15112020-10-30 11:16:55 DEBUG (MainThread) [xknx.telegram] <Telegram group_address="GroupAddress("5/0/12")", payload="<DPTBinary value="0" />" telegramtype="TelegramType.GROUP_WRITE" direction="TelegramDirection.INCOMING" />
15122020-10-30 11:16:55 INFO (MainThread) [homeassistant.components.automation.4_1_0_sync_state_switch_tv_front_end_with_reality] 4.1.0 Sync state switch tv front-end with reality: Running automation actions
15132020-10-30 11:16:55 INFO (MainThread) [homeassistant.components.automation.4_1_0_sync_state_switch_tv_front_end_with_reality] 4.1.0 Sync state switch tv front-end with reality: Executing step call service
15142020-10-30 11:16:55 INFO (MainThread) [homeassistant.components.system_log.external] 4.1.0 The state of Ping 10.58.60.16 binary_sensor.ping_10_58_60_16 changed from on to on
15152020-10-30 11:16:55 INFO (MainThread) [homeassistant.components.automation.4_1_0_sync_state_switch_tv_front_end_with_reality] 4.1.0 Sync state switch tv front-end with reality: Executing step call service
15162020-10-30 11:16:55 INFO (SyncWorker_48) [homeassistant.components.python_script] Executing set_state.py: {'entity_id': 'switch.tv_toggle', 'state': 'on'}
15172020-10-30 11:16:55 INFO (SyncWorker_48) [homeassistant.components.python_script.set_state.py] switch.tv_toggle: state> on
15182020-10-30 11:16:58 DEBUG (MainThread) [xknx.raw_socket] Received from ('10.58.60.11', 3671): 061004200015041149002900bce01109280c010081
15192020-10-30 11:16:58 DEBUG (MainThread) [xknx.knx] Received: <KNXIPFrame <KNXIPHeader HeaderLength="6" ProtocolVersion="16" KNXIPServiceType="KNXIPServiceType.TUNNELLING_REQUEST" Reserve="0" TotalLength="21" />
1520 body="<TunnellingRequest communication_channel_id="17" sequence_counter="73" cemi="<CEMIFrame SourceAddress="PhysicalAddress("1.1.9")" DestinationAddress="GroupAddress("5/0/12")" Flags="1011110011100000" Command="APCICommand.GROUP_WRITE" payload="<DPTBinary value="1" />" />" />" />
15212020-10-30 11:16:58 DEBUG (MainThread) [xknx.knx] Sending: <KNXIPFrame <KNXIPHeader HeaderLength="6" ProtocolVersion="16" KNXIPServiceType="KNXIPServiceType.TUNNELLING_ACK" Reserve="0" TotalLength="10" />
1522 body="<TunnellingAck communication_channel_id="17" sequence_counter="73" status_code="ErrorCode.E_NO_ERROR" />" />
15232020-10-30 11:16:58 DEBUG (MainThread) [xknx.telegram] <Telegram group_address="GroupAddress("5/0/12")", payload="<DPTBinary value="1" />" telegramtype="TelegramType.GROUP_WRITE" direction="TelegramDirection.INCOMING" />
15242020-10-30 11:17:00 INFO (MainThread) [homeassistant.components.automation.4_1_0_sync_state_switch_tv_front_end_with_reality] 4.1.0 Sync state switch tv front-end with reality: Running automation actions
15252020-10-30 11:17:00 INFO (MainThread) [homeassistant.components.automation.4_1_0_sync_state_switch_tv_front_end_with_reality] 4.1.0 Sync state switch tv front-end with reality: Executing step call service
15262020-10-30 11:17:00 INFO (MainThread) [homeassistant.components.system_log.external] 4.1.0 The state of Ping 10.58.60.16 binary_sensor.ping_10_58_60_16 changed from on to on
15272020-10-30 11:17:00 INFO (MainThread) [homeassistant.components.automation.4_1_0_sync_state_switch_tv_front_end_with_reality] 4.1.0 Sync state switch tv front-end with reality: Executing step call service
15282020-10-30 11:17:00 INFO (SyncWorker_50) [homeassistant.components.python_script] Executing set_state.py: {'entity_id': 'switch.tv_toggle', 'state': 'on'}
15292020-10-30 11:17:00 INFO (SyncWorker_50) [homeassistant.components.python_script.set_state.py] switch.tv_toggle: state> on
15302020-10-30 11:17:04 DEBUG (MainThread) [xknx.knx] Sending: <KNXIPFrame <KNXIPHeader HeaderLength="6" ProtocolVersion="16" KNXIPServiceType="KNXIPServiceType.CONNECTIONSTATE_REQUEST" Reserve="0" TotalLength="16" />
1531 body="<ConnectionStateRequest CommunicationChannelID="17", control_endpoint="<HPAI 10.58.60.89:35606 />" />" />
15322020-10-30 11:17:04 DEBUG (MainThread) [xknx.raw_socket] Received from ('10.58.60.11', 3671): 0610020800081100
15332020-10-30 11:17:04 DEBUG (MainThread) [xknx.knx] Received: <KNXIPFrame <KNXIPHeader HeaderLength="6" ProtocolVersion="16" KNXIPServiceType="KNXIPServiceType.CONNECTIONSTATE_RESPONSE" Reserve="0" TotalLength="8" />
1534 body="<ConnectionStateResponse CommunicationChannelID="17" status_code="ErrorCode.E_NO_ERROR" />" />
15352020-10-30 11:17:05 INFO (MainThread) [homeassistant.components.automation.4_1_0_sync_state_switch_tv_front_end_with_reality] 4.1.0 Sync state switch tv front-end with reality: Running automation actions
15362020-10-30 11:17:05 INFO (MainThread) [homeassistant.components.automation.4_1_0_sync_state_switch_tv_front_end_with_reality] 4.1.0 Sync state switch tv front-end with reality: Executing step call service
15372020-10-30 11:17:05 INFO (MainThread) [homeassistant.components.system_log.external] 4.1.0 The state of Ping 10.58.60.16 binary_sensor.ping_10_58_60_16 changed from on to on
15382020-10-30 11:17:05 INFO (MainThread) [homeassistant.components.automation.4_1_0_sync_state_switch_tv_front_end_with_reality] 4.1.0 Sync state switch tv front-end with reality: Executing step call service
15392020-10-30 11:17:05 INFO (SyncWorker_49) [homeassistant.components.python_script] Executing set_state.py: {'entity_id': 'switch.tv_toggle', 'state': 'on'}
15402020-10-30 11:17:05 INFO (SyncWorker_49) [homeassistant.components.python_script.set_state.py] switch.tv_toggle: state> on
15412020-10-30 11:17:08 INFO (MainThread) [custom_components.visonic.pyvisonic] [data receiver] *** Received validated message 0XA5 ***
15422020-10-30 11:17:08 DEBUG (MainThread) [xknx.raw_socket] Received from ('10.58.60.11', 3671): 06100420001504114a002900bce01109280c010080
15432020-10-30 11:17:08 DEBUG (MainThread) [xknx.knx] Received: <KNXIPFrame <KNXIPHeader HeaderLength="6" ProtocolVersion="16" KNXIPServiceType="KNXIPServiceType.TUNNELLING_REQUEST" Reserve="0" TotalLength="21" />
1544 body="<TunnellingRequest communication_channel_id="17" sequence_counter="74" cemi="<CEMIFrame SourceAddress="PhysicalAddress("1.1.9")" DestinationAddress="GroupAddress("5/0/12")" Flags="1011110011100000" Command="APCICommand.GROUP_WRITE" payload="<DPTBinary value="0" />" />" />" />
15452020-10-30 11:17:08 DEBUG (MainThread) [xknx.knx] Sending: <KNXIPFrame <KNXIPHeader HeaderLength="6" ProtocolVersion="16" KNXIPServiceType="KNXIPServiceType.TUNNELLING_ACK" Reserve="0" TotalLength="10" />
1546 body="<TunnellingAck communication_channel_id="17" sequence_counter="74" status_code="ErrorCode.E_NO_ERROR" />" />
15472020-10-30 11:17:08 DEBUG (MainThread) [xknx.telegram] <Telegram group_address="GroupAddress("5/0/12")", payload="<DPTBinary value="0" />" telegramtype="TelegramType.GROUP_WRITE" direction="TelegramDirection.INCOMING" />
15482020-10-30 11:17:10 INFO (MainThread) [homeassistant.components.automation.4_1_0_sync_state_switch_tv_front_end_with_reality] 4.1.0 Sync state switch tv front-end with reality: Running automation actions
15492020-10-30 11:17:10 INFO (MainThread) [homeassistant.components.automation.4_1_0_sync_state_switch_tv_front_end_with_reality] 4.1.0 Sync state switch tv front-end with reality: Executing step call service
15502020-10-30 11:17:10 INFO (MainThread) [homeassistant.components.system_log.external] 4.1.0 The state of Ping 10.58.60.16 binary_sensor.ping_10_58_60_16 changed from on to on
15512020-10-30 11:17:10 INFO (MainThread) [homeassistant.components.automation.4_1_0_sync_state_switch_tv_front_end_with_reality] 4.1.0 Sync state switch tv front-end with reality: Executing step call service
15522020-10-30 11:17:10 INFO (SyncWorker_52) [homeassistant.components.python_script] Executing set_state.py: {'entity_id': 'switch.tv_toggle', 'state': 'on'}
15532020-10-30 11:17:10 INFO (SyncWorker_52) [homeassistant.components.python_script.set_state.py] switch.tv_toggle: state> on
15542020-10-30 11:17:14 DEBUG (MainThread) [xknx.raw_socket] Received from ('10.58.60.11', 3671): 06100420001704114b002900bce0110328010300801cd9
15552020-10-30 11:17:14 DEBUG (MainThread) [xknx.knx] Received: <KNXIPFrame <KNXIPHeader HeaderLength="6" ProtocolVersion="16" KNXIPServiceType="KNXIPServiceType.TUNNELLING_REQUEST" Reserve="0" TotalLength="23" />
1556 body="<TunnellingRequest communication_channel_id="17" sequence_counter="75" cemi="<CEMIFrame SourceAddress="PhysicalAddress("1.1.3")" DestinationAddress="GroupAddress("5/0/1")" Flags="1011110011100000" Command="APCICommand.GROUP_WRITE" payload="<DPTArray value="[0x1c,0xd9]" />" />" />" />
15572020-10-30 11:17:14 DEBUG (MainThread) [xknx.knx] Sending: <KNXIPFrame <KNXIPHeader HeaderLength="6" ProtocolVersion="16" KNXIPServiceType="KNXIPServiceType.TUNNELLING_ACK" Reserve="0" TotalLength="10" />
1558 body="<TunnellingAck communication_channel_id="17" sequence_counter="75" status_code="ErrorCode.E_NO_ERROR" />" />
15592020-10-30 11:17:14 DEBUG (MainThread) [xknx.telegram] <Telegram group_address="GroupAddress("5/0/1")", payload="<DPTArray value="[0x1c,0xd9]" />" telegramtype="TelegramType.GROUP_WRITE" direction="TelegramDirection.INCOMING" />
15602020-10-30 11:17:15 INFO (MainThread) [homeassistant.components.automation.4_1_0_sync_state_switch_tv_front_end_with_reality] 4.1.0 Sync state switch tv front-end with reality: Running automation actions
15612020-10-30 11:17:15 INFO (MainThread) [homeassistant.components.automation.4_1_0_sync_state_switch_tv_front_end_with_reality] 4.1.0 Sync state switch tv front-end with reality: Executing step call service
15622020-10-30 11:17:15 INFO (MainThread) [homeassistant.components.system_log.external] 4.1.0 The state of Ping 10.58.60.16 binary_sensor.ping_10_58_60_16 changed from on to on
15632020-10-30 11:17:15 INFO (MainThread) [homeassistant.components.automation.4_1_0_sync_state_switch_tv_front_end_with_reality] 4.1.0 Sync state switch tv front-end with reality: Executing step call service
15642020-10-30 11:17:15 INFO (SyncWorker_31) [homeassistant.components.python_script] Executing set_state.py: {'entity_id': 'switch.tv_toggle', 'state': 'on'}
15652020-10-30 11:17:15 INFO (SyncWorker_31) [homeassistant.components.python_script.set_state.py] switch.tv_toggle: state> on
15662020-10-30 11:17:19 INFO (MainThread) [custom_components.visonic.pyvisonic] [data receiver] *** Received validated message 0XAB ***
15672020-10-30 11:17:19 INFO (MainThread) [custom_components.visonic.pyvisonic] [handle_msgtypeAB] ***************************** Got PowerLink Keep-Alive ****************************
15682020-10-30 11:17:19 INFO (MainThread) [custom_components.visonic.pyvisonic] =============================================== Display Status ===============================================
15692020-10-30 11:17:19 INFO (MainThread) [custom_components.visonic.pyvisonic]      key 0  Sensor id=1  dname=Z01  stype=Magnet   zname=Front door     ztypeName=Delay 1    ztamper=0  ztrip=0  bypass=0  lowbatt=0  status=0  tamper=0  enrolled=1  triggered=0 
15702020-10-30 11:17:19 INFO (MainThread) [custom_components.visonic.pyvisonic]      key 1  Sensor id=2  dname=Z02  stype=Motion   zname=Hall           ztypeName=Delay 1    ztamper=0  ztrip=0  bypass=0  lowbatt=0  status=0  tamper=0  enrolled=1  triggered=0 
15712020-10-30 11:17:19 INFO (MainThread) [custom_components.visonic.pyvisonic]      key 2  Sensor id=3  dname=Z03  stype=Motion   zname=Dining room    ztypeName=Perimeter  ztamper=0  ztrip=0  bypass=0  lowbatt=0  status=0  tamper=0  enrolled=1  triggered=0 
15722020-10-30 11:17:19 INFO (MainThread) [custom_components.visonic.pyvisonic]      key 3  Sensor id=4  dname=Z04  stype=Motion   zname=Living room    ztypeName=Perimeter  ztamper=0  ztrip=0  bypass=0  lowbatt=0  status=0  tamper=0  enrolled=1  triggered=1 
15732020-10-30 11:17:19 INFO (MainThread) [custom_components.visonic.pyvisonic]    Model PowerMax Pro           PowerMaster No                     LastEvent None                   Ready   Yes          
15742020-10-30 11:17:19 INFO (MainThread) [custom_components.visonic.pyvisonic]    Mode  Powerlink              Status      Disarmed               Armed     No                     Trouble None              AlarmStatus None        
15752020-10-30 11:17:19 INFO (MainThread) [custom_components.visonic.pyvisonic] ==============================================================================================================
15762020-10-30 11:17:19 DEBUG (MainThread) [xknx.knx] Sending: <KNXIPFrame <KNXIPHeader HeaderLength="6" ProtocolVersion="16" KNXIPServiceType="KNXIPServiceType.CONNECTIONSTATE_REQUEST" Reserve="0" TotalLength="16" />
1577 body="<ConnectionStateRequest CommunicationChannelID="17", control_endpoint="<HPAI 10.58.60.89:35606 />" />" />
15782020-10-30 11:17:19 DEBUG (MainThread) [xknx.raw_socket] Received from ('10.58.60.11', 3671): 0610020800081100
15792020-10-30 11:17:19 DEBUG (MainThread) [xknx.knx] Received: <KNXIPFrame <KNXIPHeader HeaderLength="6" ProtocolVersion="16" KNXIPServiceType="KNXIPServiceType.CONNECTIONSTATE_RESPONSE" Reserve="0" TotalLength="8" />
1580 body="<ConnectionStateResponse CommunicationChannelID="17" status_code="ErrorCode.E_NO_ERROR" />" />
15812020-10-30 11:17:20 INFO (MainThread) [homeassistant.components.automation.4_1_0_sync_state_switch_tv_front_end_with_reality] 4.1.0 Sync state switch tv front-end with reality: Running automation actions
15822020-10-30 11:17:20 INFO (MainThread) [homeassistant.components.automation.4_1_0_sync_state_switch_tv_front_end_with_reality] 4.1.0 Sync state switch tv front-end with reality: Executing step call service
15832020-10-30 11:17:20 INFO (MainThread) [homeassistant.components.system_log.external] 4.1.0 The state of Ping 10.58.60.16 binary_sensor.ping_10_58_60_16 changed from on to on
15842020-10-30 11:17:20 INFO (MainThread) [homeassistant.components.automation.4_1_0_sync_state_switch_tv_front_end_with_reality] 4.1.0 Sync state switch tv front-end with reality: Executing step call service
15852020-10-30 11:17:20 INFO (SyncWorker_10) [homeassistant.components.python_script] Executing set_state.py: {'entity_id': 'switch.tv_toggle', 'state': 'on'}
15862020-10-30 11:17:20 INFO (SyncWorker_10) [homeassistant.components.python_script.set_state.py] switch.tv_toggle: state> on
15872020-10-30 11:17:25 INFO (MainThread) [homeassistant.components.automation.4_1_0_sync_state_switch_tv_front_end_with_reality] 4.1.0 Sync state switch tv front-end with reality: Running automation actions
15882020-10-30 11:17:25 INFO (MainThread) [homeassistant.components.automation.4_1_0_sync_state_switch_tv_front_end_with_reality] 4.1.0 Sync state switch tv front-end with reality: Executing step call service
15892020-10-30 11:17:25 INFO (MainThread) [homeassistant.components.system_log.external] 4.1.0 The state of Ping 10.58.60.16 binary_sensor.ping_10_58_60_16 changed from on to on
15902020-10-30 11:17:25 INFO (MainThread) [homeassistant.components.automation.4_1_0_sync_state_switch_tv_front_end_with_reality] 4.1.0 Sync state switch tv front-end with reality: Executing step call service
15912020-10-30 11:17:25 INFO (SyncWorker_44) [homeassistant.components.python_script] Executing set_state.py: {'entity_id': 'switch.tv_toggle', 'state': 'on'}
15922020-10-30 11:17:25 INFO (SyncWorker_44) [homeassistant.components.python_script.set_state.py] switch.tv_toggle: state> on
15932020-10-30 11:17:27 DEBUG (MainThread) [xknx.raw_socket] Received from ('10.58.60.11', 3671): 06100420001704114c002900bce01109280a0300801ddd
15942020-10-30 11:17:27 DEBUG (MainThread) [xknx.knx] Received: <KNXIPFrame <KNXIPHeader HeaderLength="6" ProtocolVersion="16" KNXIPServiceType="KNXIPServiceType.TUNNELLING_REQUEST" Reserve="0" TotalLength="23" />
1595 body="<TunnellingRequest communication_channel_id="17" sequence_counter="76" cemi="<CEMIFrame SourceAddress="PhysicalAddress("1.1.9")" DestinationAddress="GroupAddress("5/0/10")" Flags="1011110011100000" Command="APCICommand.GROUP_WRITE" payload="<DPTArray value="[0x1d,0xdd]" />" />" />" />
15962020-10-30 11:17:27 DEBUG (MainThread) [xknx.knx] Sending: <KNXIPFrame <KNXIPHeader HeaderLength="6" ProtocolVersion="16" KNXIPServiceType="KNXIPServiceType.TUNNELLING_ACK" Reserve="0" TotalLength="10" />
1597 body="<TunnellingAck communication_channel_id="17" sequence_counter="76" status_code="ErrorCode.E_NO_ERROR" />" />
15982020-10-30 11:17:27 DEBUG (MainThread) [xknx.telegram] <Telegram group_address="GroupAddress("5/0/10")", payload="<DPTArray value="[0x1d,0xdd]" />" telegramtype="TelegramType.GROUP_WRITE" direction="TelegramDirection.INCOMING" />
15992020-10-30 11:17:30 INFO (MainThread) [homeassistant.components.automation.4_1_0_sync_state_switch_tv_front_end_with_reality] 4.1.0 Sync state switch tv front-end with reality: Running automation actions
16002020-10-30 11:17:30 INFO (MainThread) [homeassistant.components.automation.4_1_0_sync_state_switch_tv_front_end_with_reality] 4.1.0 Sync state switch tv front-end with reality: Executing step call service
16012020-10-30 11:17:30 INFO (MainThread) [homeassistant.components.system_log.external] 4.1.0 The state of Ping 10.58.60.16 binary_sensor.ping_10_58_60_16 changed from on to on
16022020-10-30 11:17:30 INFO (MainThread) [homeassistant.components.automation.4_1_0_sync_state_switch_tv_front_end_with_reality] 4.1.0 Sync state switch tv front-end with reality: Executing step call service
16032020-10-30 11:17:30 INFO (SyncWorker_12) [homeassistant.components.python_script] Executing set_state.py: {'entity_id': 'switch.tv_toggle', 'state': 'on'}
16042020-10-30 11:17:30 INFO (SyncWorker_12) [homeassistant.components.python_script.set_state.py] switch.tv_toggle: state> on
16052020-10-30 11:17:34 DEBUG (MainThread) [xknx.raw_socket] Received from ('10.58.60.11', 3671): 06100420001704114d002900bce01108280903008007a8
16062020-10-30 11:17:34 DEBUG (MainThread) [xknx.knx] Received: <KNXIPFrame <KNXIPHeader HeaderLength="6" ProtocolVersion="16" KNXIPServiceType="KNXIPServiceType.TUNNELLING_REQUEST" Reserve="0" TotalLength="23" />
1607 body="<TunnellingRequest communication_channel_id="17" sequence_counter="77" cemi="<CEMIFrame SourceAddress="PhysicalAddress("1.1.8")" DestinationAddress="GroupAddress("5/0/9")" Flags="1011110011100000" Command="APCICommand.GROUP_WRITE" payload="<DPTArray value="[0x7,0xa8]" />" />" />" />
16082020-10-30 11:17:34 DEBUG (MainThread) [xknx.knx] Sending: <KNXIPFrame <KNXIPHeader HeaderLength="6" ProtocolVersion="16" KNXIPServiceType="KNXIPServiceType.TUNNELLING_ACK" Reserve="0" TotalLength="10" />
1609 body="<TunnellingAck communication_channel_id="17" sequence_counter="77" status_code="ErrorCode.E_NO_ERROR" />" />
16102020-10-30 11:17:34 DEBUG (MainThread) [xknx.telegram] <Telegram group_address="GroupAddress("5/0/9")", payload="<DPTArray value="[0x7,0xa8]" />" telegramtype="TelegramType.GROUP_WRITE" direction="TelegramDirection.INCOMING" />
16112020-10-30 11:17:34 DEBUG (MainThread) [xknx.knx] Sending: <KNXIPFrame <KNXIPHeader HeaderLength="6" ProtocolVersion="16" KNXIPServiceType="KNXIPServiceType.CONNECTIONSTATE_REQUEST" Reserve="0" TotalLength="16" />
1612 body="<ConnectionStateRequest CommunicationChannelID="17", control_endpoint="<HPAI 10.58.60.89:35606 />" />" />
16132020-10-30 11:17:34 DEBUG (MainThread) [xknx.raw_socket] Received from ('10.58.60.11', 3671): 0610020800081100
16142020-10-30 11:17:34 DEBUG (MainThread) [xknx.knx] Received: <KNXIPFrame <KNXIPHeader HeaderLength="6" ProtocolVersion="16" KNXIPServiceType="KNXIPServiceType.CONNECTIONSTATE_RESPONSE" Reserve="0" TotalLength="8" />
1615 body="<ConnectionStateResponse CommunicationChannelID="17" status_code="ErrorCode.E_NO_ERROR" />" />
16162020-10-30 11:17:35 INFO (MainThread) [homeassistant.components.automation.4_1_0_sync_state_switch_tv_front_end_with_reality] 4.1.0 Sync state switch tv front-end with reality: Running automation actions
16172020-10-30 11:17:35 INFO (MainThread) [homeassistant.components.automation.4_1_0_sync_state_switch_tv_front_end_with_reality] 4.1.0 Sync state switch tv front-end with reality: Executing step call service
16182020-10-30 11:17:35 INFO (MainThread) [homeassistant.components.system_log.external] 4.1.0 The state of Ping 10.58.60.16 binary_sensor.ping_10_58_60_16 changed from on to on
16192020-10-30 11:17:35 INFO (MainThread) [homeassistant.components.automation.4_1_0_sync_state_switch_tv_front_end_with_reality] 4.1.0 Sync state switch tv front-end with reality: Executing step call service
16202020-10-30 11:17:35 INFO (SyncWorker_2) [homeassistant.components.python_script] Executing set_state.py: {'entity_id': 'switch.tv_toggle', 'state': 'on'}
16212020-10-30 11:17:35 INFO (SyncWorker_2) [homeassistant.components.python_script.set_state.py] switch.tv_toggle: state> on
16222020-10-30 11:17:36 DEBUG (MainThread) [xknx.raw_socket] Received from ('10.58.60.11', 3671): 06100420001704114e002900bce0110728050300801d16
16232020-10-30 11:17:36 DEBUG (MainThread) [xknx.knx] Received: <KNXIPFrame <KNXIPHeader HeaderLength="6" ProtocolVersion="16" KNXIPServiceType="KNXIPServiceType.TUNNELLING_REQUEST" Reserve="0" TotalLength="23" />
1624 body="<TunnellingRequest communication_channel_id="17" sequence_counter="78" cemi="<CEMIFrame SourceAddress="PhysicalAddress("1.1.7")" DestinationAddress="GroupAddress("5/0/5")" Flags="1011110011100000" Command="APCICommand.GROUP_WRITE" payload="<DPTArray value="[0x1d,0x16]" />" />" />" />
16252020-10-30 11:17:36 DEBUG (MainThread) [xknx.knx] Sending: <KNXIPFrame <KNXIPHeader HeaderLength="6" ProtocolVersion="16" KNXIPServiceType="KNXIPServiceType.TUNNELLING_ACK" Reserve="0" TotalLength="10" />
1626 body="<TunnellingAck communication_channel_id="17" sequence_counter="78" status_code="ErrorCode.E_NO_ERROR" />" />
16272020-10-30 11:17:36 DEBUG (MainThread) [xknx.telegram] <Telegram group_address="GroupAddress("5/0/5")", payload="<DPTArray value="[0x1d,0x16]" />" telegramtype="TelegramType.GROUP_WRITE" direction="TelegramDirection.INCOMING" />
16282020-10-30 11:17:40 INFO (MainThread) [homeassistant.components.automation.4_1_0_sync_state_switch_tv_front_end_with_reality] 4.1.0 Sync state switch tv front-end with reality: Running automation actions
16292020-10-30 11:17:40 INFO (MainThread) [homeassistant.components.automation.4_1_0_sync_state_switch_tv_front_end_with_reality] 4.1.0 Sync state switch tv front-end with reality: Executing step call service
16302020-10-30 11:17:40 INFO (MainThread) [homeassistant.components.system_log.external] 4.1.0 The state of Ping 10.58.60.16 binary_sensor.ping_10_58_60_16 changed from on to on
16312020-10-30 11:17:40 INFO (MainThread) [homeassistant.components.automation.4_1_0_sync_state_switch_tv_front_end_with_reality] 4.1.0 Sync state switch tv front-end with reality: Executing step call service
16322020-10-30 11:17:40 INFO (SyncWorker_42) [homeassistant.components.python_script] Executing set_state.py: {'entity_id': 'switch.tv_toggle', 'state': 'on'}
16332020-10-30 11:17:40 INFO (SyncWorker_42) [homeassistant.components.python_script.set_state.py] switch.tv_toggle: state> on
16342020-10-30 11:17:45 INFO (MainThread) [homeassistant.components.automation.4_1_0_sync_state_switch_tv_front_end_with_reality] 4.1.0 Sync state switch tv front-end with reality: Running automation actions
16352020-10-30 11:17:45 INFO (MainThread) [homeassistant.components.automation.4_1_0_sync_state_switch_tv_front_end_with_reality] 4.1.0 Sync state switch tv front-end with reality: Executing step call service
16362020-10-30 11:17:45 INFO (MainThread) [homeassistant.components.system_log.external] 4.1.0 The state of Ping 10.58.60.16 binary_sensor.ping_10_58_60_16 changed from on to on
16372020-10-30 11:17:45 INFO (MainThread) [homeassistant.components.automation.4_1_0_sync_state_switch_tv_front_end_with_reality] 4.1.0 Sync state switch tv front-end with reality: Executing step call service
16382020-10-30 11:17:45 INFO (SyncWorker_46) [homeassistant.components.python_script] Executing set_state.py: {'entity_id': 'switch.tv_toggle', 'state': 'on'}
16392020-10-30 11:17:45 INFO (SyncWorker_46) [homeassistant.components.python_script.set_state.py] switch.tv_toggle: state> on
16402020-10-30 11:17:49 INFO (MainThread) [custom_components.visonic.pyvisonic] [data receiver] *** Received validated message 0XAB ***
16412020-10-30 11:17:49 INFO (MainThread) [custom_components.visonic.pyvisonic] [handle_msgtypeAB] ***************************** Got PowerLink Keep-Alive ****************************
16422020-10-30 11:17:49 INFO (MainThread) [custom_components.visonic.pyvisonic] =============================================== Display Status ===============================================
16432020-10-30 11:17:49 INFO (MainThread) [custom_components.visonic.pyvisonic]      key 0  Sensor id=1  dname=Z01  stype=Magnet   zname=Front door     ztypeName=Delay 1    ztamper=0  ztrip=0  bypass=0  lowbatt=0  status=0  tamper=0  enrolled=1  triggered=0 
16442020-10-30 11:17:49 INFO (MainThread) [custom_components.visonic.pyvisonic]      key 1  Sensor id=2  dname=Z02  stype=Motion   zname=Hall           ztypeName=Delay 1    ztamper=0  ztrip=0  bypass=0  lowbatt=0  status=0  tamper=0  enrolled=1  triggered=0 
16452020-10-30 11:17:49 INFO (MainThread) [custom_components.visonic.pyvisonic]      key 2  Sensor id=3  dname=Z03  stype=Motion   zname=Dining room    ztypeName=Perimeter  ztamper=0  ztrip=0  bypass=0  lowbatt=0  status=0  tamper=0  enrolled=1  triggered=0 
16462020-10-30 11:17:49 INFO (MainThread) [custom_components.visonic.pyvisonic]      key 3  Sensor id=4  dname=Z04  stype=Motion   zname=Living room    ztypeName=Perimeter  ztamper=0  ztrip=0  bypass=0  lowbatt=0  status=0  tamper=0  enrolled=1  triggered=1 
16472020-10-30 11:17:49 INFO (MainThread) [custom_components.visonic.pyvisonic]    Model PowerMax Pro           PowerMaster No                     LastEvent None                   Ready   Yes          
16482020-10-30 11:17:49 INFO (MainThread) [custom_components.visonic.pyvisonic]    Mode  Powerlink              Status      Disarmed               Armed     No                     Trouble None              AlarmStatus None        
16492020-10-30 11:17:49 INFO (MainThread) [custom_components.visonic.pyvisonic] ==============================================================================================================
16502020-10-30 11:17:49 DEBUG (MainThread) [xknx.knx] Sending: <KNXIPFrame <KNXIPHeader HeaderLength="6" ProtocolVersion="16" KNXIPServiceType="KNXIPServiceType.CONNECTIONSTATE_REQUEST" Reserve="0" TotalLength="16" />
1651 body="<ConnectionStateRequest CommunicationChannelID="17", control_endpoint="<HPAI 10.58.60.89:35606 />" />" />
16522020-10-30 11:17:49 DEBUG (MainThread) [xknx.raw_socket] Received from ('10.58.60.11', 3671): 0610020800081100
16532020-10-30 11:17:49 DEBUG (MainThread) [xknx.knx] Received: <KNXIPFrame <KNXIPHeader HeaderLength="6" ProtocolVersion="16" KNXIPServiceType="KNXIPServiceType.CONNECTIONSTATE_RESPONSE" Reserve="0" TotalLength="8" />
1654 body="<ConnectionStateResponse CommunicationChannelID="17" status_code="ErrorCode.E_NO_ERROR" />" />
16552020-10-30 11:17:50 INFO (MainThread) [homeassistant.components.automation.4_1_0_sync_state_switch_tv_front_end_with_reality] 4.1.0 Sync state switch tv front-end with reality: Running automation actions
16562020-10-30 11:17:50 INFO (MainThread) [homeassistant.components.automation.4_1_0_sync_state_switch_tv_front_end_with_reality] 4.1.0 Sync state switch tv front-end with reality: Executing step call service
16572020-10-30 11:17:50 INFO (MainThread) [homeassistant.components.system_log.external] 4.1.0 The state of Ping 10.58.60.16 binary_sensor.ping_10_58_60_16 changed from on to on
16582020-10-30 11:17:50 INFO (MainThread) [homeassistant.components.automation.4_1_0_sync_state_switch_tv_front_end_with_reality] 4.1.0 Sync state switch tv front-end with reality: Executing step call service
16592020-10-30 11:17:50 INFO (SyncWorker_13) [homeassistant.components.python_script] Executing set_state.py: {'entity_id': 'switch.tv_toggle', 'state': 'on'}
16602020-10-30 11:17:50 INFO (SyncWorker_13) [homeassistant.components.python_script.set_state.py] switch.tv_toggle: state> on
16612020-10-30 11:17:55 INFO (MainThread) [homeassistant.components.automation.4_1_0_sync_state_switch_tv_front_end_with_reality] 4.1.0 Sync state switch tv front-end with reality: Running automation actions
16622020-10-30 11:17:55 INFO (MainThread) [homeassistant.components.automation.4_1_0_sync_state_switch_tv_front_end_with_reality] 4.1.0 Sync state switch tv front-end with reality: Executing step call service
16632020-10-30 11:17:55 INFO (MainThread) [homeassistant.components.system_log.external] 4.1.0 The state of Ping 10.58.60.16 binary_sensor.ping_10_58_60_16 changed from on to on
16642020-10-30 11:17:55 INFO (MainThread) [homeassistant.components.automation.4_1_0_sync_state_switch_tv_front_end_with_reality] 4.1.0 Sync state switch tv front-end with reality: Executing step call service
16652020-10-30 11:17:55 INFO (SyncWorker_25) [homeassistant.components.python_script] Executing set_state.py: {'entity_id': 'switch.tv_toggle', 'state': 'on'}
16662020-10-30 11:17:55 INFO (SyncWorker_25) [homeassistant.components.python_script.set_state.py] switch.tv_toggle: state> on
16672020-10-30 11:18:00 INFO (MainThread) [homeassistant.components.automation.4_1_0_sync_state_switch_tv_front_end_with_reality] 4.1.0 Sync state switch tv front-end with reality: Running automation actions
16682020-10-30 11:18:00 INFO (MainThread) [homeassistant.components.automation.4_1_0_sync_state_switch_tv_front_end_with_reality] 4.1.0 Sync state switch tv front-end with reality: Executing step call service
16692020-10-30 11:18:00 INFO (MainThread) [homeassistant.components.system_log.external] 4.1.0 The state of Ping 10.58.60.16 binary_sensor.ping_10_58_60_16 changed from on to on
16702020-10-30 11:18:00 INFO (MainThread) [homeassistant.components.automation.4_1_0_sync_state_switch_tv_front_end_with_reality] 4.1.0 Sync state switch tv front-end with reality: Executing step call service
16712020-10-30 11:18:00 INFO (SyncWorker_28) [homeassistant.components.python_script] Executing set_state.py: {'entity_id': 'switch.tv_toggle', 'state': 'on'}
16722020-10-30 11:18:00 INFO (SyncWorker_28) [homeassistant.components.python_script.set_state.py] switch.tv_toggle: state> on
16732020-10-30 11:18:04 DEBUG (MainThread) [xknx.knx] Sending: <KNXIPFrame <KNXIPHeader HeaderLength="6" ProtocolVersion="16" KNXIPServiceType="KNXIPServiceType.CONNECTIONSTATE_REQUEST" Reserve="0" TotalLength="16" />
1674 body="<ConnectionStateRequest CommunicationChannelID="17", control_endpoint="<HPAI 10.58.60.89:35606 />" />" />
16752020-10-30 11:18:04 DEBUG (MainThread) [xknx.raw_socket] Received from ('10.58.60.11', 3671): 0610020800081100
16762020-10-30 11:18:04 DEBUG (MainThread) [xknx.knx] Received: <KNXIPFrame <KNXIPHeader HeaderLength="6" ProtocolVersion="16" KNXIPServiceType="KNXIPServiceType.CONNECTIONSTATE_RESPONSE" Reserve="0" TotalLength="8" />
1677 body="<ConnectionStateResponse CommunicationChannelID="17" status_code="ErrorCode.E_NO_ERROR" />" />
16782020-10-30 11:18:05 INFO (MainThread) [homeassistant.components.automation.4_1_0_sync_state_switch_tv_front_end_with_reality] 4.1.0 Sync state switch tv front-end with reality: Running automation actions
16792020-10-30 11:18:05 INFO (MainThread) [homeassistant.components.automation.4_1_0_sync_state_switch_tv_front_end_with_reality] 4.1.0 Sync state switch tv front-end with reality: Executing step call service
16802020-10-30 11:18:05 INFO (MainThread) [homeassistant.components.system_log.external] 4.1.0 The state of Ping 10.58.60.16 binary_sensor.ping_10_58_60_16 changed from on to on
16812020-10-30 11:18:05 INFO (MainThread) [homeassistant.components.automation.4_1_0_sync_state_switch_tv_front_end_with_reality] 4.1.0 Sync state switch tv front-end with reality: Executing step call service
16822020-10-30 11:18:05 INFO (SyncWorker_35) [homeassistant.components.python_script] Executing set_state.py: {'entity_id': 'switch.tv_toggle', 'state': 'on'}
16832020-10-30 11:18:05 INFO (SyncWorker_35) [homeassistant.components.python_script.set_state.py] switch.tv_toggle: state> on
16842020-10-30 11:18:10 INFO (MainThread) [homeassistant.components.automation.4_1_0_sync_state_switch_tv_front_end_with_reality] 4.1.0 Sync state switch tv front-end with reality: Running automation actions
16852020-10-30 11:18:10 INFO (MainThread) [homeassistant.components.automation.4_1_0_sync_state_switch_tv_front_end_with_reality] 4.1.0 Sync state switch tv front-end with reality: Executing step call service
16862020-10-30 11:18:10 INFO (MainThread) [homeassistant.components.system_log.external] 4.1.0 The state of Ping 10.58.60.16 binary_sensor.ping_10_58_60_16 changed from on to on
16872020-10-30 11:18:10 INFO (MainThread) [homeassistant.components.automation.4_1_0_sync_state_switch_tv_front_end_with_reality] 4.1.0 Sync state switch tv front-end with reality: Executing step call service
16882020-10-30 11:18:10 INFO (SyncWorker_22) [homeassistant.components.python_script] Executing set_state.py: {'entity_id': 'switch.tv_toggle', 'state': 'on'}
16892020-10-30 11:18:10 INFO (SyncWorker_22) [homeassistant.components.python_script.set_state.py] switch.tv_toggle: state> on
16902020-10-30 11:18:17 DEBUG (MainThread) [xknx.raw_socket] Received from ('10.58.60.11', 3671): 06100420001704114f002900bce0110328010300801d02
16912020-10-30 11:18:17 DEBUG (MainThread) [xknx.knx] Received: <KNXIPFrame <KNXIPHeader HeaderLength="6" ProtocolVersion="16" KNXIPServiceType="KNXIPServiceType.TUNNELLING_REQUEST" Reserve="0" TotalLength="23" />
1692 body="<TunnellingRequest communication_channel_id="17" sequence_counter="79" cemi="<CEMIFrame SourceAddress="PhysicalAddress("1.1.3")" DestinationAddress="GroupAddress("5/0/1")" Flags="1011110011100000" Command="APCICommand.GROUP_WRITE" payload="<DPTArray value="[0x1d,0x2]" />" />" />" />
16932020-10-30 11:18:17 DEBUG (MainThread) [xknx.knx] Sending: <KNXIPFrame <KNXIPHeader HeaderLength="6" ProtocolVersion="16" KNXIPServiceType="KNXIPServiceType.TUNNELLING_ACK" Reserve="0" TotalLength="10" />
1694 body="<TunnellingAck communication_channel_id="17" sequence_counter="79" status_code="ErrorCode.E_NO_ERROR" />" />
16952020-10-30 11:18:17 DEBUG (MainThread) [xknx.telegram] <Telegram group_address="GroupAddress("5/0/1")", payload="<DPTArray value="[0x1d,0x2]" />" telegramtype="TelegramType.GROUP_WRITE" direction="TelegramDirection.INCOMING" />
16962020-10-30 11:18:17 DEBUG (MainThread) [xknx.raw_socket] Received from ('10.58.60.11', 3671): 06100420001704114f002900bce0110328010300801d02
16972020-10-30 11:18:17 DEBUG (MainThread) [xknx.knx] Received: <KNXIPFrame <KNXIPHeader HeaderLength="6" ProtocolVersion="16" KNXIPServiceType="KNXIPServiceType.TUNNELLING_REQUEST" Reserve="0" TotalLength="23" />
1698 body="<TunnellingRequest communication_channel_id="17" sequence_counter="79" cemi="<CEMIFrame SourceAddress="PhysicalAddress("1.1.3")" DestinationAddress="GroupAddress("5/0/1")" Flags="1011110011100000" Command="APCICommand.GROUP_WRITE" payload="<DPTArray value="[0x1d,0x2]" />" />" />" />
16992020-10-30 11:18:17 DEBUG (MainThread) [xknx.knx] Sending: <KNXIPFrame <KNXIPHeader HeaderLength="6" ProtocolVersion="16" KNXIPServiceType="KNXIPServiceType.TUNNELLING_ACK" Reserve="0" TotalLength="10" />
1700 body="<TunnellingAck communication_channel_id="17" sequence_counter="79" status_code="ErrorCode.E_NO_ERROR" />" />
17012020-10-30 11:18:17 DEBUG (MainThread) [xknx.telegram] <Telegram group_address="GroupAddress("5/0/1")", payload="<DPTArray value="[0x1d,0x2]" />" telegramtype="TelegramType.GROUP_WRITE" direction="TelegramDirection.INCOMING" />
17022020-10-30 11:18:17 DEBUG (MainThread) [xknx.raw_socket] Received from ('10.58.60.11', 3671): 061002090010110008010a3a3c0b0e57
17032020-10-30 11:18:17 DEBUG (MainThread) [xknx.knx] Received: <KNXIPFrame <KNXIPHeader HeaderLength="6" ProtocolVersion="16" KNXIPServiceType="KNXIPServiceType.DISCONNECT_REQUEST" Reserve="0" TotalLength="16" />
1704 body="<DisconnectRequest CommunicationChannelID="17" control_endpoint="<HPAI 10.58.60.11:3671 />" />" />
17052020-10-30 11:18:17 DEBUG (MainThread) [xknx.log] UNHANDLED: KNXIPServiceType.DISCONNECT_REQUEST
17062020-10-30 11:18:18 INFO (MainThread) [homeassistant.components.automation.4_1_0_sync_state_switch_tv_front_end_with_reality] 4.1.0 Sync state switch tv front-end with reality: Running automation actions
17072020-10-30 11:18:18 INFO (MainThread) [homeassistant.components.automation.4_1_0_sync_state_switch_tv_front_end_with_reality] 4.1.0 Sync state switch tv front-end with reality: Executing step call service
17082020-10-30 11:18:18 INFO (MainThread) [homeassistant.components.system_log.external] 4.1.0 The state of Ping 10.58.60.16 binary_sensor.ping_10_58_60_16 changed from on to on
17092020-10-30 11:18:18 INFO (MainThread) [homeassistant.components.automation.4_1_0_sync_state_switch_tv_front_end_with_reality] 4.1.0 Sync state switch tv front-end with reality: Executing step call service
17102020-10-30 11:18:18 INFO (SyncWorker_20) [homeassistant.components.python_script] Executing set_state.py: {'entity_id': 'switch.tv_toggle', 'state': 'on'}
17112020-10-30 11:18:18 INFO (SyncWorker_20) [homeassistant.components.python_script.set_state.py] switch.tv_toggle: state> on
17122020-10-30 11:18:19 INFO (MainThread) [custom_components.visonic.pyvisonic] [data receiver] *** Received validated message 0XAB ***
17132020-10-30 11:18:19 INFO (MainThread) [custom_components.visonic.pyvisonic] [handle_msgtypeAB] ***************************** Got PowerLink Keep-Alive ****************************
17142020-10-30 11:18:19 INFO (MainThread) [custom_components.visonic.pyvisonic] =============================================== Display Status ===============================================
17152020-10-30 11:18:19 INFO (MainThread) [custom_components.visonic.pyvisonic]      key 0  Sensor id=1  dname=Z01  stype=Magnet   zname=Front door     ztypeName=Delay 1    ztamper=0  ztrip=0  bypass=0  lowbatt=0  status=0  tamper=0  enrolled=1  triggered=0 
17162020-10-30 11:18:19 INFO (MainThread) [custom_components.visonic.pyvisonic]      key 1  Sensor id=2  dname=Z02  stype=Motion   zname=Hall           ztypeName=Delay 1    ztamper=0  ztrip=0  bypass=0  lowbatt=0  status=0  tamper=0  enrolled=1  triggered=0 
17172020-10-30 11:18:19 INFO (MainThread) [custom_components.visonic.pyvisonic]      key 2  Sensor id=3  dname=Z03  stype=Motion   zname=Dining room    ztypeName=Perimeter  ztamper=0  ztrip=0  bypass=0  lowbatt=0  status=0  tamper=0  enrolled=1  triggered=0 
17182020-10-30 11:18:19 INFO (MainThread) [custom_components.visonic.pyvisonic]      key 3  Sensor id=4  dname=Z04  stype=Motion   zname=Living room    ztypeName=Perimeter  ztamper=0  ztrip=0  bypass=0  lowbatt=0  status=0  tamper=0  enrolled=1  triggered=1 
17192020-10-30 11:18:19 INFO (MainThread) [custom_components.visonic.pyvisonic]    Model PowerMax Pro           PowerMaster No                     LastEvent None                   Ready   Yes          
17202020-10-30 11:18:19 INFO (MainThread) [custom_components.visonic.pyvisonic]    Mode  Powerlink              Status      Disarmed               Armed     No                     Trouble None              AlarmStatus None        
17212020-10-30 11:18:19 INFO (MainThread) [custom_components.visonic.pyvisonic] ==============================================================================================================
17222020-10-30 11:18:19 DEBUG (MainThread) [xknx.knx] Sending: <KNXIPFrame <KNXIPHeader HeaderLength="6" ProtocolVersion="16" KNXIPServiceType="KNXIPServiceType.CONNECTIONSTATE_REQUEST" Reserve="0" TotalLength="16" />
1723 body="<ConnectionStateRequest CommunicationChannelID="17", control_endpoint="<HPAI 10.58.60.89:35606 />" />" />
17242020-10-30 11:18:19 DEBUG (MainThread) [xknx.raw_socket] Received from ('10.58.60.11', 3671): 0610020800081121
17252020-10-30 11:18:19 DEBUG (MainThread) [xknx.knx] Received: <KNXIPFrame <KNXIPHeader HeaderLength="6" ProtocolVersion="16" KNXIPServiceType="KNXIPServiceType.CONNECTIONSTATE_RESPONSE" Reserve="0" TotalLength="8" />
1726 body="<ConnectionStateResponse CommunicationChannelID="17" status_code="ErrorCode.E_CONNECTION_ID" />" />
17272020-10-30 11:18:19 DEBUG (MainThread) [xknx.log] Error: KNX bus responded to request of type 'ConnectionState' with error in 'ConnectionStateResponse': ErrorCode.E_CONNECTION_ID
17282020-10-30 11:18:27 INFO (MainThread) [homeassistant.components.automation.4_1_0_sync_state_switch_tv_front_end_with_reality] 4.1.0 Sync state switch tv front-end with reality: Running automation actions
17292020-10-30 11:18:27 INFO (MainThread) [homeassistant.components.automation.4_1_0_sync_state_switch_tv_front_end_with_reality] 4.1.0 Sync state switch tv front-end with reality: Executing step call service
17302020-10-30 11:18:27 INFO (MainThread) [homeassistant.components.system_log.external] 4.1.0 The state of Ping 10.58.60.16 binary_sensor.ping_10_58_60_16 changed from on to on
17312020-10-30 11:18:27 INFO (MainThread) [homeassistant.components.automation.4_1_0_sync_state_switch_tv_front_end_with_reality] 4.1.0 Sync state switch tv front-end with reality: Executing step call service
17322020-10-30 11:18:27 INFO (SyncWorker_11) [homeassistant.components.python_script] Executing set_state.py: {'entity_id': 'switch.tv_toggle', 'state': 'on'}
17332020-10-30 11:18:27 INFO (SyncWorker_11) [homeassistant.components.python_script.set_state.py] switch.tv_toggle: state> on
17342020-10-30 11:18:32 INFO (MainThread) [homeassistant.components.automation.4_1_0_sync_state_switch_tv_front_end_with_reality] 4.1.0 Sync state switch tv front-end with reality: Running automation actions
17352020-10-30 11:18:32 INFO (MainThread) [homeassistant.components.automation.4_1_0_sync_state_switch_tv_front_end_with_reality] 4.1.0 Sync state switch tv front-end with reality: Executing step call service
17362020-10-30 11:18:32 INFO (MainThread) [homeassistant.components.system_log.external] 4.1.0 The state of Ping 10.58.60.16 binary_sensor.ping_10_58_60_16 changed from on to on
17372020-10-30 11:18:32 INFO (MainThread) [homeassistant.components.automation.4_1_0_sync_state_switch_tv_front_end_with_reality] 4.1.0 Sync state switch tv front-end with reality: Executing step call service
17382020-10-30 11:18:32 INFO (SyncWorker_37) [homeassistant.components.python_script] Executing set_state.py: {'entity_id': 'switch.tv_toggle', 'state': 'on'}
17392020-10-30 11:18:32 INFO (SyncWorker_37) [homeassistant.components.python_script.set_state.py] switch.tv_toggle: state> on
17402020-10-30 11:18:34 DEBUG (MainThread) [xknx.knx] Sending: <KNXIPFrame <KNXIPHeader HeaderLength="6" ProtocolVersion="16" KNXIPServiceType="KNXIPServiceType.CONNECTIONSTATE_REQUEST" Reserve="0" TotalLength="16" />
1741 body="<ConnectionStateRequest CommunicationChannelID="17", control_endpoint="<HPAI 10.58.60.89:35606 />" />" />
17422020-10-30 11:18:35 DEBUG (MainThread) [xknx.raw_socket] Received from ('10.58.60.11', 3671): 0610020800081121
17432020-10-30 11:18:35 DEBUG (MainThread) [xknx.knx] Received: <KNXIPFrame <KNXIPHeader HeaderLength="6" ProtocolVersion="16" KNXIPServiceType="KNXIPServiceType.CONNECTIONSTATE_RESPONSE" Reserve="0" TotalLength="8" />
1744 body="<ConnectionStateResponse CommunicationChannelID="17" status_code="ErrorCode.E_CONNECTION_ID" />" />
17452020-10-30 11:18:35 DEBUG (MainThread) [xknx.log] Error: KNX bus responded to request of type 'ConnectionState' with error in 'ConnectionStateResponse': ErrorCode.E_CONNECTION_ID
17462020-10-30 11:18:37 INFO (MainThread) [homeassistant.components.automation.4_1_0_sync_state_switch_tv_front_end_with_reality] 4.1.0 Sync state switch tv front-end with reality: Running automation actions
17472020-10-30 11:18:37 INFO (MainThread) [homeassistant.components.automation.4_1_0_sync_state_switch_tv_front_end_with_reality] 4.1.0 Sync state switch tv front-end with reality: Executing step call service
17482020-10-30 11:18:37 INFO (MainThread) [homeassistant.components.system_log.external] 4.1.0 The state of Ping 10.58.60.16 binary_sensor.ping_10_58_60_16 changed from on to on
17492020-10-30 11:18:37 INFO (MainThread) [homeassistant.components.automation.4_1_0_sync_state_switch_tv_front_end_with_reality] 4.1.0 Sync state switch tv front-end with reality: Executing step call service
17502020-10-30 11:18:37 INFO (SyncWorker_48) [homeassistant.components.python_script] Executing set_state.py: {'entity_id': 'switch.tv_toggle', 'state': 'on'}
17512020-10-30 11:18:37 INFO (SyncWorker_48) [homeassistant.components.python_script.set_state.py] switch.tv_toggle: state> on
17522020-10-30 11:18:42 INFO (MainThread) [homeassistant.components.automation.4_1_0_sync_state_switch_tv_front_end_with_reality] 4.1.0 Sync state switch tv front-end with reality: Running automation actions
17532020-10-30 11:18:42 INFO (MainThread) [homeassistant.components.automation.4_1_0_sync_state_switch_tv_front_end_with_reality] 4.1.0 Sync state switch tv front-end with reality: Executing step call service
17542020-10-30 11:18:42 INFO (MainThread) [homeassistant.components.system_log.external] 4.1.0 The state of Ping 10.58.60.16 binary_sensor.ping_10_58_60_16 changed from on to on
17552020-10-30 11:18:42 INFO (MainThread) [homeassistant.components.automation.4_1_0_sync_state_switch_tv_front_end_with_reality] 4.1.0 Sync state switch tv front-end with reality: Executing step call service
17562020-10-30 11:18:42 INFO (SyncWorker_39) [homeassistant.components.python_script] Executing set_state.py: {'entity_id': 'switch.tv_toggle', 'state': 'on'}
17572020-10-30 11:18:42 INFO (SyncWorker_39) [homeassistant.components.python_script.set_state.py] switch.tv_toggle: state> on
17582020-10-30 11:18:47 INFO (MainThread) [homeassistant.components.automation.4_1_0_sync_state_switch_tv_front_end_with_reality] 4.1.0 Sync state switch tv front-end with reality: Running automation actions
17592020-10-30 11:18:47 INFO (MainThread) [homeassistant.components.automation.4_1_0_sync_state_switch_tv_front_end_with_reality] 4.1.0 Sync state switch tv front-end with reality: Executing step call service
17602020-10-30 11:18:47 INFO (MainThread) [homeassistant.components.system_log.external] 4.1.0 The state of Ping 10.58.60.16 binary_sensor.ping_10_58_60_16 changed from on to on
17612020-10-30 11:18:47 INFO (MainThread) [homeassistant.components.automation.4_1_0_sync_state_switch_tv_front_end_with_reality] 4.1.0 Sync state switch tv front-end with reality: Executing step call service
17622020-10-30 11:18:47 INFO (SyncWorker_49) [homeassistant.components.python_script] Executing set_state.py: {'entity_id': 'switch.tv_toggle', 'state': 'on'}
17632020-10-30 11:18:47 INFO (SyncWorker_49) [homeassistant.components.python_script.set_state.py] switch.tv_toggle: state> on
17642020-10-30 11:18:49 INFO (MainThread) [custom_components.visonic.pyvisonic] [data receiver] *** Received validated message 0XAB ***
17652020-10-30 11:18:49 INFO (MainThread) [custom_components.visonic.pyvisonic] [handle_msgtypeAB] ***************************** Got PowerLink Keep-Alive ****************************
17662020-10-30 11:18:49 INFO (MainThread) [custom_components.visonic.pyvisonic] =============================================== Display Status ===============================================
17672020-10-30 11:18:49 INFO (MainThread) [custom_components.visonic.pyvisonic]      key 0  Sensor id=1  dname=Z01  stype=Magnet   zname=Front door     ztypeName=Delay 1    ztamper=0  ztrip=0  bypass=0  lowbatt=0  status=0  tamper=0  enrolled=1  triggered=0 
17682020-10-30 11:18:49 INFO (MainThread) [custom_components.visonic.pyvisonic]      key 1  Sensor id=2  dname=Z02  stype=Motion   zname=Hall           ztypeName=Delay 1    ztamper=0  ztrip=0  bypass=0  lowbatt=0  status=0  tamper=0  enrolled=1  triggered=0 
17692020-10-30 11:18:49 INFO (MainThread) [custom_components.visonic.pyvisonic]      key 2  Sensor id=3  dname=Z03  stype=Motion   zname=Dining room    ztypeName=Perimeter  ztamper=0  ztrip=0  bypass=0  lowbatt=0  status=0  tamper=0  enrolled=1  triggered=0 
17702020-10-30 11:18:49 INFO (MainThread) [custom_components.visonic.pyvisonic]      key 3  Sensor id=4  dname=Z04  stype=Motion   zname=Living room    ztypeName=Perimeter  ztamper=0  ztrip=0  bypass=0  lowbatt=0  status=0  tamper=0  enrolled=1  triggered=0 
17712020-10-30 11:18:49 INFO (MainThread) [custom_components.visonic.pyvisonic]    Model PowerMax Pro           PowerMaster No                     LastEvent None                   Ready   Yes          
17722020-10-30 11:18:49 INFO (MainThread) [custom_components.visonic.pyvisonic]    Mode  Powerlink              Status      Disarmed               Armed     No                     Trouble None              AlarmStatus None        
17732020-10-30 11:18:49 INFO (MainThread) [custom_components.visonic.pyvisonic] ==============================================================================================================
17742020-10-30 11:18:50 DEBUG (MainThread) [xknx.knx] Sending: <KNXIPFrame <KNXIPHeader HeaderLength="6" ProtocolVersion="16" KNXIPServiceType="KNXIPServiceType.CONNECTIONSTATE_REQUEST" Reserve="0" TotalLength="16" />
1775 body="<ConnectionStateRequest CommunicationChannelID="17", control_endpoint="<HPAI 10.58.60.89:35606 />" />" />
17762020-10-30 11:18:50 DEBUG (MainThread) [xknx.raw_socket] Received from ('10.58.60.11', 3671): 0610020800081121
17772020-10-30 11:18:50 DEBUG (MainThread) [xknx.knx] Received: <KNXIPFrame <KNXIPHeader HeaderLength="6" ProtocolVersion="16" KNXIPServiceType="KNXIPServiceType.CONNECTIONSTATE_RESPONSE" Reserve="0" TotalLength="8" />
1778 body="<ConnectionStateResponse CommunicationChannelID="17" status_code="ErrorCode.E_CONNECTION_ID" />" />
17792020-10-30 11:18:50 DEBUG (MainThread) [xknx.log] Error: KNX bus responded to request of type 'ConnectionState' with error in 'ConnectionStateResponse': ErrorCode.E_CONNECTION_ID
17802020-10-30 11:18:52 INFO (MainThread) [homeassistant.components.automation.4_1_0_sync_state_switch_tv_front_end_with_reality] 4.1.0 Sync state switch tv front-end with reality: Running automation actions
17812020-10-30 11:18:52 INFO (MainThread) [homeassistant.components.automation.4_1_0_sync_state_switch_tv_front_end_with_reality] 4.1.0 Sync state switch tv front-end with reality: Executing step call service
17822020-10-30 11:18:52 INFO (MainThread) [homeassistant.components.system_log.external] 4.1.0 The state of Ping 10.58.60.16 binary_sensor.ping_10_58_60_16 changed from on to on
17832020-10-30 11:18:52 INFO (MainThread) [homeassistant.components.automation.4_1_0_sync_state_switch_tv_front_end_with_reality] 4.1.0 Sync state switch tv front-end with reality: Executing step call service
17842020-10-30 11:18:52 INFO (SyncWorker_17) [homeassistant.components.python_script] Executing set_state.py: {'entity_id': 'switch.tv_toggle', 'state': 'on'}
17852020-10-30 11:18:52 INFO (SyncWorker_17) [homeassistant.components.python_script.set_state.py] switch.tv_toggle: state> on
17862020-10-30 11:18:57 INFO (MainThread) [homeassistant.components.automation.4_1_0_sync_state_switch_tv_front_end_with_reality] 4.1.0 Sync state switch tv front-end with reality: Running automation actions
17872020-10-30 11:18:57 INFO (MainThread) [homeassistant.components.automation.4_1_0_sync_state_switch_tv_front_end_with_reality] 4.1.0 Sync state switch tv front-end with reality: Executing step call service
17882020-10-30 11:18:57 INFO (MainThread) [homeassistant.components.system_log.external] 4.1.0 The state of Ping 10.58.60.16 binary_sensor.ping_10_58_60_16 changed from on to on
17892020-10-30 11:18:57 INFO (MainThread) [homeassistant.components.automation.4_1_0_sync_state_switch_tv_front_end_with_reality] 4.1.0 Sync state switch tv front-end with reality: Executing step call service
17902020-10-30 11:18:57 INFO (SyncWorker_31) [homeassistant.components.python_script] Executing set_state.py: {'entity_id': 'switch.tv_toggle', 'state': 'on'}
17912020-10-30 11:18:57 INFO (SyncWorker_31) [homeassistant.components.python_script.set_state.py] switch.tv_toggle: state> on
17922020-10-30 11:19:02 INFO (MainThread) [homeassistant.components.automation.4_1_0_sync_state_switch_tv_front_end_with_reality] 4.1.0 Sync state switch tv front-end with reality: Running automation actions
17932020-10-30 11:19:02 INFO (MainThread) [homeassistant.components.automation.4_1_0_sync_state_switch_tv_front_end_with_reality] 4.1.0 Sync state switch tv front-end with reality: Executing step call service
17942020-10-30 11:19:02 INFO (MainThread) [homeassistant.components.system_log.external] 4.1.0 The state of Ping 10.58.60.16 binary_sensor.ping_10_58_60_16 changed from on to on
17952020-10-30 11:19:02 INFO (MainThread) [homeassistant.components.automation.4_1_0_sync_state_switch_tv_front_end_with_reality] 4.1.0 Sync state switch tv front-end with reality: Executing step call service
17962020-10-30 11:19:02 INFO (SyncWorker_17) [homeassistant.components.python_script] Executing set_state.py: {'entity_id': 'switch.tv_toggle', 'state': 'on'}
17972020-10-30 11:19:02 INFO (SyncWorker_17) [homeassistant.components.python_script.set_state.py] switch.tv_toggle: state> on
17982020-10-30 11:19:05 DEBUG (MainThread) [xknx.knx] Sending: <KNXIPFrame <KNXIPHeader HeaderLength="6" ProtocolVersion="16" KNXIPServiceType="KNXIPServiceType.CONNECTIONSTATE_REQUEST" Reserve="0" TotalLength="16" />
1799 body="<ConnectionStateRequest CommunicationChannelID="17", control_endpoint="<HPAI 10.58.60.89:35606 />" />" />
18002020-10-30 11:19:05 DEBUG (MainThread) [xknx.raw_socket] Received from ('10.58.60.11', 3671): 0610020800081121
18012020-10-30 11:19:05 DEBUG (MainThread) [xknx.knx] Received: <KNXIPFrame <KNXIPHeader HeaderLength="6" ProtocolVersion="16" KNXIPServiceType="KNXIPServiceType.CONNECTIONSTATE_RESPONSE" Reserve="0" TotalLength="8" />
1802 body="<ConnectionStateResponse CommunicationChannelID="17" status_code="ErrorCode.E_CONNECTION_ID" />" />
18032020-10-30 11:19:05 DEBUG (MainThread) [xknx.log] Error: KNX bus responded to request of type 'ConnectionState' with error in 'ConnectionStateResponse': ErrorCode.E_CONNECTION_ID
18042020-10-30 11:19:05 WARNING (MainThread) [xknx.log] Heartbeat to KNX bus failed. Reconnecting.
18052020-10-30 11:19:05 DEBUG (MainThread) [xknx.knx] Sending: <KNXIPFrame <KNXIPHeader HeaderLength="6" ProtocolVersion="16" KNXIPServiceType="KNXIPServiceType.DISCONNECT_REQUEST" Reserve="0" TotalLength="16" />
1806 body="<DisconnectRequest CommunicationChannelID="17" control_endpoint="<HPAI 10.58.60.89:35606 />" />" />
18072020-10-30 11:19:05 DEBUG (MainThread) [xknx.raw_socket] Received from ('10.58.60.11', 3671): 0610020a00081121
18082020-10-30 11:19:05 DEBUG (MainThread) [xknx.knx] Received: <KNXIPFrame <KNXIPHeader HeaderLength="6" ProtocolVersion="16" KNXIPServiceType="KNXIPServiceType.DISCONNECT_RESPONSE" Reserve="0" TotalLength="8" />
1809 body="<DisconnectResponse CommunicationChannelID="17" status_code="ErrorCode.E_CONNECTION_ID" />" />
18102020-10-30 11:19:05 DEBUG (MainThread) [xknx.log] Error: KNX bus responded to request of type 'Disconnect' with error in 'DisconnectResponse': ErrorCode.E_CONNECTION_ID
18112020-10-30 11:19:06 DEBUG (MainThread) [xknx.log] Error: KNX bus did not respond in time (1 secs) to request of type 'Disconnect'
18122020-10-30 11:19:07 INFO (MainThread) [homeassistant.components.automation.4_1_0_sync_state_switch_tv_front_end_with_reality] 4.1.0 Sync state switch tv front-end with reality: Running automation actions
18132020-10-30 11:19:07 INFO (MainThread) [homeassistant.components.automation.4_1_0_sync_state_switch_tv_front_end_with_reality] 4.1.0 Sync state switch tv front-end with reality: Executing step call service
18142020-10-30 11:19:07 INFO (MainThread) [homeassistant.components.system_log.external] 4.1.0 The state of Ping 10.58.60.16 binary_sensor.ping_10_58_60_16 changed from on to on
18152020-10-30 11:19:07 INFO (MainThread) [homeassistant.components.automation.4_1_0_sync_state_switch_tv_front_end_with_reality] 4.1.0 Sync state switch tv front-end with reality: Executing step call service
18162020-10-30 11:19:07 INFO (SyncWorker_31) [homeassistant.components.python_script] Executing set_state.py: {'entity_id': 'switch.tv_toggle', 'state': 'on'}
18172020-10-30 11:19:07 INFO (SyncWorker_31) [homeassistant.components.python_script.set_state.py] switch.tv_toggle: state> on
18182020-10-30 11:19:12 INFO (MainThread) [homeassistant.components.automation.4_1_0_sync_state_switch_tv_front_end_with_reality] 4.1.0 Sync state switch tv front-end with reality: Running automation actions
18192020-10-30 11:19:12 INFO (MainThread) [homeassistant.components.automation.4_1_0_sync_state_switch_tv_front_end_with_reality] 4.1.0 Sync state switch tv front-end with reality: Executing step call service
18202020-10-30 11:19:12 INFO (MainThread) [homeassistant.components.system_log.external] 4.1.0 The state of Ping 10.58.60.16 binary_sensor.ping_10_58_60_16 changed from on to on
18212020-10-30 11:19:12 INFO (MainThread) [homeassistant.components.automation.4_1_0_sync_state_switch_tv_front_end_with_reality] 4.1.0 Sync state switch tv front-end with reality: Executing step call service
18222020-10-30 11:19:12 INFO (SyncWorker_32) [homeassistant.components.python_script] Executing set_state.py: {'entity_id': 'switch.tv_toggle', 'state': 'on'}
18232020-10-30 11:19:12 INFO (SyncWorker_32) [homeassistant.components.python_script.set_state.py] switch.tv_toggle: state> on
18242020-10-30 11:19:17 INFO (MainThread) [homeassistant.components.automation.4_1_0_sync_state_switch_tv_front_end_with_reality] 4.1.0 Sync state switch tv front-end with reality: Running automation actions
18252020-10-30 11:19:17 INFO (MainThread) [homeassistant.components.automation.4_1_0_sync_state_switch_tv_front_end_with_reality] 4.1.0 Sync state switch tv front-end with reality: Executing step call service
18262020-10-30 11:19:17 INFO (MainThread) [homeassistant.components.system_log.external] 4.1.0 The state of Ping 10.58.60.16 binary_sensor.ping_10_58_60_16 changed from on to on
18272020-10-30 11:19:17 INFO (MainThread) [homeassistant.components.automation.4_1_0_sync_state_switch_tv_front_end_with_reality] 4.1.0 Sync state switch tv front-end with reality: Executing step call service
18282020-10-30 11:19:17 INFO (SyncWorker_19) [homeassistant.components.python_script] Executing set_state.py: {'entity_id': 'switch.tv_toggle', 'state': 'on'}
18292020-10-30 11:19:17 INFO (SyncWorker_19) [homeassistant.components.python_script.set_state.py] switch.tv_toggle: state> on
18302020-10-30 11:19:19 INFO (MainThread) [custom_components.visonic.pyvisonic] [data receiver] *** Received validated message 0XAB ***
18312020-10-30 11:19:19 INFO (MainThread) [custom_components.visonic.pyvisonic] [handle_msgtypeAB] ***************************** Got PowerLink Keep-Alive ****************************
18322020-10-30 11:19:19 INFO (MainThread) [custom_components.visonic.pyvisonic] =============================================== Display Status ===============================================
18332020-10-30 11:19:19 INFO (MainThread) [custom_components.visonic.pyvisonic]      key 0  Sensor id=1  dname=Z01  stype=Magnet   zname=Front door     ztypeName=Delay 1    ztamper=0  ztrip=0  bypass=0  lowbatt=0  status=0  tamper=0  enrolled=1  triggered=0 
18342020-10-30 11:19:19 INFO (MainThread) [custom_components.visonic.pyvisonic]      key 1  Sensor id=2  dname=Z02  stype=Motion   zname=Hall           ztypeName=Delay 1    ztamper=0  ztrip=0  bypass=0  lowbatt=0  status=0  tamper=0  enrolled=1  triggered=0 
18352020-10-30 11:19:19 INFO (MainThread) [custom_components.visonic.pyvisonic]      key 2  Sensor id=3  dname=Z03  stype=Motion   zname=Dining room    ztypeName=Perimeter  ztamper=0  ztrip=0  bypass=0  lowbatt=0  status=0  tamper=0  enrolled=1  triggered=0 
18362020-10-30 11:19:19 INFO (MainThread) [custom_components.visonic.pyvisonic]      key 3  Sensor id=4  dname=Z04  stype=Motion   zname=Living room    ztypeName=Perimeter  ztamper=0  ztrip=0  bypass=0  lowbatt=0  status=0  tamper=0  enrolled=1  triggered=0 
18372020-10-30 11:19:19 INFO (MainThread) [custom_components.visonic.pyvisonic]    Model PowerMax Pro           PowerMaster No                     LastEvent None                   Ready   Yes          
18382020-10-30 11:19:19 INFO (MainThread) [custom_components.visonic.pyvisonic]    Mode  Powerlink              Status      Disarmed               Armed     No                     Trouble None              AlarmStatus None        
18392020-10-30 11:19:19 INFO (MainThread) [custom_components.visonic.pyvisonic] ==============================================================================================================
18402020-10-30 11:19:22 INFO (MainThread) [homeassistant.components.automation.4_1_0_sync_state_switch_tv_front_end_with_reality] 4.1.0 Sync state switch tv front-end with reality: Running automation actions
18412020-10-30 11:19:22 INFO (MainThread) [homeassistant.components.automation.4_1_0_sync_state_switch_tv_front_end_with_reality] 4.1.0 Sync state switch tv front-end with reality: Executing step call service
18422020-10-30 11:19:22 INFO (MainThread) [homeassistant.components.system_log.external] 4.1.0 The state of Ping 10.58.60.16 binary_sensor.ping_10_58_60_16 changed from on to on
18432020-10-30 11:19:22 INFO (MainThread) [homeassistant.components.automation.4_1_0_sync_state_switch_tv_front_end_with_reality] 4.1.0 Sync state switch tv front-end with reality: Executing step call service
18442020-10-30 11:19:22 INFO (SyncWorker_43) [homeassistant.components.python_script] Executing set_state.py: {'entity_id': 'switch.tv_toggle', 'state': 'on'}
18452020-10-30 11:19:22 INFO (SyncWorker_43) [homeassistant.components.python_script.set_state.py] switch.tv_toggle: state> on
18462020-10-30 11:19:27 INFO (MainThread) [homeassistant.components.automation.4_1_0_sync_state_switch_tv_front_end_with_reality] 4.1.0 Sync state switch tv front-end with reality: Running automation actions
18472020-10-30 11:19:27 INFO (MainThread) [homeassistant.components.automation.4_1_0_sync_state_switch_tv_front_end_with_reality] 4.1.0 Sync state switch tv front-end with reality: Executing step call service
18482020-10-30 11:19:27 INFO (MainThread) [homeassistant.components.system_log.external] 4.1.0 The state of Ping 10.58.60.16 binary_sensor.ping_10_58_60_16 changed from on to on
18492020-10-30 11:19:27 INFO (MainThread) [homeassistant.components.automation.4_1_0_sync_state_switch_tv_front_end_with_reality] 4.1.0 Sync state switch tv front-end with reality: Executing step call service
18502020-10-30 11:19:27 INFO (SyncWorker_27) [homeassistant.components.python_script] Executing set_state.py: {'entity_id': 'switch.tv_toggle', 'state': 'on'}
18512020-10-30 11:19:27 INFO (SyncWorker_27) [homeassistant.components.python_script.set_state.py] switch.tv_toggle: state> on
18522020-10-30 11:19:32 INFO (MainThread) [homeassistant.components.automation.4_1_0_sync_state_switch_tv_front_end_with_reality] 4.1.0 Sync state switch tv front-end with reality: Running automation actions
18532020-10-30 11:19:32 INFO (MainThread) [homeassistant.components.automation.4_1_0_sync_state_switch_tv_front_end_with_reality] 4.1.0 Sync state switch tv front-end with reality: Executing step call service
18542020-10-30 11:19:32 INFO (MainThread) [homeassistant.components.system_log.external] 4.1.0 The state of Ping 10.58.60.16 binary_sensor.ping_10_58_60_16 changed from on to on
18552020-10-30 11:19:32 INFO (MainThread) [homeassistant.components.automation.4_1_0_sync_state_switch_tv_front_end_with_reality] 4.1.0 Sync state switch tv front-end with reality: Executing step call service
18562020-10-30 11:19:32 INFO (SyncWorker_46) [homeassistant.components.python_script] Executing set_state.py: {'entity_id': 'switch.tv_toggle', 'state': 'on'}
18572020-10-30 11:19:32 INFO (SyncWorker_46) [homeassistant.components.python_script.set_state.py] switch.tv_toggle: state> on
18582020-10-30 11:19:37 INFO (MainThread) [homeassistant.components.automation.4_1_0_sync_state_switch_tv_front_end_with_reality] 4.1.0 Sync state switch tv front-end with reality: Running automation actions
18592020-10-30 11:19:37 INFO (MainThread) [homeassistant.components.automation.4_1_0_sync_state_switch_tv_front_end_with_reality] 4.1.0 Sync state switch tv front-end with reality: Executing step call service
18602020-10-30 11:19:37 INFO (MainThread) [homeassistant.components.system_log.external] 4.1.0 The state of Ping 10.58.60.16 binary_sensor.ping_10_58_60_16 changed from on to on
18612020-10-30 11:19:37 INFO (MainThread) [homeassistant.components.automation.4_1_0_sync_state_switch_tv_front_end_with_reality] 4.1.0 Sync state switch tv front-end with reality: Executing step call service
18622020-10-30 11:19:37 INFO (SyncWorker_4) [homeassistant.components.python_script] Executing set_state.py: {'entity_id': 'switch.tv_toggle', 'state': 'on'}
18632020-10-30 11:19:37 INFO (SyncWorker_4) [homeassistant.components.python_script.set_state.py] switch.tv_toggle: state> on
18642020-10-30 11:19:42 INFO (MainThread) [homeassistant.components.automation.4_1_0_sync_state_switch_tv_front_end_with_reality] 4.1.0 Sync state switch tv front-end with reality: Running automation actions
18652020-10-30 11:19:42 INFO (MainThread) [homeassistant.components.automation.4_1_0_sync_state_switch_tv_front_end_with_reality] 4.1.0 Sync state switch tv front-end with reality: Executing step call service
18662020-10-30 11:19:42 INFO (MainThread) [homeassistant.components.system_log.external] 4.1.0 The state of Ping 10.58.60.16 binary_sensor.ping_10_58_60_16 changed from on to on
18672020-10-30 11:19:42 INFO (MainThread) [homeassistant.components.automation.4_1_0_sync_state_switch_tv_front_end_with_reality] 4.1.0 Sync state switch tv front-end with reality: Executing step call service
18682020-10-30 11:19:42 INFO (SyncWorker_16) [homeassistant.components.python_script] Executing set_state.py: {'entity_id': 'switch.tv_toggle', 'state': 'on'}
18692020-10-30 11:19:42 INFO (SyncWorker_16) [homeassistant.components.python_script.set_state.py] switch.tv_toggle: state> on
18702020-10-30 11:19:47 INFO (MainThread) [homeassistant.components.automation.4_1_0_sync_state_switch_tv_front_end_with_reality] 4.1.0 Sync state switch tv front-end with reality: Running automation actions
18712020-10-30 11:19:47 INFO (MainThread) [homeassistant.components.automation.4_1_0_sync_state_switch_tv_front_end_with_reality] 4.1.0 Sync state switch tv front-end with reality: Executing step call service
18722020-10-30 11:19:47 INFO (MainThread) [homeassistant.components.system_log.external] 4.1.0 The state of Ping 10.58.60.16 binary_sensor.ping_10_58_60_16 changed from on to on
18732020-10-30 11:19:47 INFO (MainThread) [homeassistant.components.automation.4_1_0_sync_state_switch_tv_front_end_with_reality] 4.1.0 Sync state switch tv front-end with reality: Executing step call service
18742020-10-30 11:19:47 INFO (SyncWorker_50) [homeassistant.components.python_script] Executing set_state.py: {'entity_id': 'switch.tv_toggle', 'state': 'on'}
18752020-10-30 11:19:47 INFO (SyncWorker_50) [homeassistant.components.python_script.set_state.py] switch.tv_toggle: state> on
18762020-10-30 11:19:50 INFO (MainThread) [custom_components.visonic.pyvisonic] [data receiver] *** Received validated message 0XAB ***
18772020-10-30 11:19:50 INFO (MainThread) [custom_components.visonic.pyvisonic] [handle_msgtypeAB] ***************************** Got PowerLink Keep-Alive ****************************
18782020-10-30 11:19:50 INFO (MainThread) [custom_components.visonic.pyvisonic] =============================================== Display Status ===============================================
18792020-10-30 11:19:50 INFO (MainThread) [custom_components.visonic.pyvisonic]      key 0  Sensor id=1  dname=Z01  stype=Magnet   zname=Front door     ztypeName=Delay 1    ztamper=0  ztrip=0  bypass=0  lowbatt=0  status=0  tamper=0  enrolled=1  triggered=0 
18802020-10-30 11:19:50 INFO (MainThread) [custom_components.visonic.pyvisonic]      key 1  Sensor id=2  dname=Z02  stype=Motion   zname=Hall           ztypeName=Delay 1    ztamper=0  ztrip=0  bypass=0  lowbatt=0  status=0  tamper=0  enrolled=1  triggered=0 
18812020-10-30 11:19:50 INFO (MainThread) [custom_components.visonic.pyvisonic]      key 2  Sensor id=3  dname=Z03  stype=Motion   zname=Dining room    ztypeName=Perimeter  ztamper=0  ztrip=0  bypass=0  lowbatt=0  status=0  tamper=0  enrolled=1  triggered=0 
18822020-10-30 11:19:50 INFO (MainThread) [custom_components.visonic.pyvisonic]      key 3  Sensor id=4  dname=Z04  stype=Motion   zname=Living room    ztypeName=Perimeter  ztamper=0  ztrip=0  bypass=0  lowbatt=0  status=0  tamper=0  enrolled=1  triggered=0 
18832020-10-30 11:19:50 INFO (MainThread) [custom_components.visonic.pyvisonic]    Model PowerMax Pro           PowerMaster No                     LastEvent None                   Ready   Yes          
18842020-10-30 11:19:50 INFO (MainThread) [custom_components.visonic.pyvisonic]    Mode  Powerlink              Status      Disarmed               Armed     No                     Trouble None              AlarmStatus None        
18852020-10-30 11:19:50 INFO (MainThread) [custom_components.visonic.pyvisonic] ==============================================================================================================
18862020-10-30 11:19:52 INFO (MainThread) [homeassistant.components.automation.4_1_0_sync_state_switch_tv_front_end_with_reality] 4.1.0 Sync state switch tv front-end with reality: Running automation actions
18872020-10-30 11:19:52 INFO (MainThread) [homeassistant.components.automation.4_1_0_sync_state_switch_tv_front_end_with_reality] 4.1.0 Sync state switch tv front-end with reality: Executing step call service
18882020-10-30 11:19:52 INFO (MainThread) [homeassistant.components.system_log.external] 4.1.0 The state of Ping 10.58.60.16 binary_sensor.ping_10_58_60_16 changed from on to on
18892020-10-30 11:19:52 INFO (MainThread) [homeassistant.components.automation.4_1_0_sync_state_switch_tv_front_end_with_reality] 4.1.0 Sync state switch tv front-end with reality: Executing step call service
18902020-10-30 11:19:52 INFO (SyncWorker_15) [homeassistant.components.python_script] Executing set_state.py: {'entity_id': 'switch.tv_toggle', 'state': 'on'}
18912020-10-30 11:19:52 INFO (SyncWorker_15) [homeassistant.components.python_script.set_state.py] switch.tv_toggle: state> on
18922020-10-30 11:19:57 INFO (MainThread) [homeassistant.components.automation.4_1_0_sync_state_switch_tv_front_end_with_reality] 4.1.0 Sync state switch tv front-end with reality: Running automation actions
18932020-10-30 11:19:57 INFO (MainThread) [homeassistant.components.automation.4_1_0_sync_state_switch_tv_front_end_with_reality] 4.1.0 Sync state switch tv front-end with reality: Executing step call service
18942020-10-30 11:19:57 INFO (MainThread) [homeassistant.components.system_log.external] 4.1.0 The state of Ping 10.58.60.16 binary_sensor.ping_10_58_60_16 changed from on to on
18952020-10-30 11:19:57 INFO (MainThread) [homeassistant.components.automation.4_1_0_sync_state_switch_tv_front_end_with_reality] 4.1.0 Sync state switch tv front-end with reality: Executing step call service
18962020-10-30 11:19:57 INFO (SyncWorker_38) [homeassistant.components.python_script] Executing set_state.py: {'entity_id': 'switch.tv_toggle', 'state': 'on'}
18972020-10-30 11:19:57 INFO (SyncWorker_38) [homeassistant.components.python_script.set_state.py] switch.tv_toggle: state> on
18982020-10-30 11:20:02 INFO (MainThread) [homeassistant.components.automation.4_1_0_sync_state_switch_tv_front_end_with_reality] 4.1.0 Sync state switch tv front-end with reality: Running automation actions
18992020-10-30 11:20:02 INFO (MainThread) [homeassistant.components.automation.4_1_0_sync_state_switch_tv_front_end_with_reality] 4.1.0 Sync state switch tv front-end with reality: Executing step call service
19002020-10-30 11:20:02 INFO (MainThread) [homeassistant.components.system_log.external] 4.1.0 The state of Ping 10.58.60.16 binary_sensor.ping_10_58_60_16 changed from on to on
19012020-10-30 11:20:02 INFO (MainThread) [homeassistant.components.automation.4_1_0_sync_state_switch_tv_front_end_with_reality] 4.1.0 Sync state switch tv front-end with reality: Executing step call service
19022020-10-30 11:20:02 INFO (SyncWorker_40) [homeassistant.components.python_script] Executing set_state.py: {'entity_id': 'switch.tv_toggle', 'state': 'on'}
19032020-10-30 11:20:02 INFO (SyncWorker_40) [homeassistant.components.python_script.set_state.py] switch.tv_toggle: state> on
19042020-10-30 11:20:08 INFO (MainThread) [homeassistant.components.automation.4_1_0_sync_state_switch_tv_front_end_with_reality] 4.1.0 Sync state switch tv front-end with reality: Running automation actions
19052020-10-30 11:20:08 INFO (MainThread) [homeassistant.components.automation.4_1_0_sync_state_switch_tv_front_end_with_reality] 4.1.0 Sync state switch tv front-end with reality: Executing step call service
19062020-10-30 11:20:08 INFO (MainThread) [homeassistant.components.system_log.external] 4.1.0 The state of Ping 10.58.60.16 binary_sensor.ping_10_58_60_16 changed from on to on
19072020-10-30 11:20:08 INFO (MainThread) [homeassistant.components.automation.4_1_0_sync_state_switch_tv_front_end_with_reality] 4.1.0 Sync state switch tv front-end with reality: Executing step call service
19082020-10-30 11:20:08 INFO (SyncWorker_47) [homeassistant.components.python_script] Executing set_state.py: {'entity_id': 'switch.tv_toggle', 'state': 'on'}
19092020-10-30 11:20:08 INFO (SyncWorker_47) [homeassistant.components.python_script.set_state.py] switch.tv_toggle: state> on
19102020-10-30 11:20:12 INFO (MainThread) [homeassistant.components.automation.4_1_0_sync_state_switch_tv_front_end_with_reality] 4.1.0 Sync state switch tv front-end with reality: Running automation actions
19112020-10-30 11:20:12 INFO (MainThread) [homeassistant.components.automation.4_1_0_sync_state_switch_tv_front_end_with_reality] 4.1.0 Sync state switch tv front-end with reality: Executing step call service
19122020-10-30 11:20:12 INFO (MainThread) [homeassistant.components.system_log.external] 4.1.0 The state of Ping 10.58.60.16 binary_sensor.ping_10_58_60_16 changed from on to on
19132020-10-30 11:20:12 INFO (MainThread) [homeassistant.components.automation.4_1_0_sync_state_switch_tv_front_end_with_reality] 4.1.0 Sync state switch tv front-end with reality: Executing step call service
19142020-10-30 11:20:12 INFO (SyncWorker_23) [homeassistant.components.python_script] Executing set_state.py: {'entity_id': 'switch.tv_toggle', 'state': 'on'}
19152020-10-30 11:20:12 INFO (SyncWorker_23) [homeassistant.components.python_script.set_state.py] switch.tv_toggle: state> on
19162020-10-30 11:20:17 INFO (MainThread) [homeassistant.components.automation.4_1_0_sync_state_switch_tv_front_end_with_reality] 4.1.0 Sync state switch tv front-end with reality: Running automation actions
19172020-10-30 11:20:17 INFO (MainThread) [homeassistant.components.automation.4_1_0_sync_state_switch_tv_front_end_with_reality] 4.1.0 Sync state switch tv front-end with reality: Executing step call service
19182020-10-30 11:20:17 INFO (MainThread) [homeassistant.components.system_log.external] 4.1.0 The state of Ping 10.58.60.16 binary_sensor.ping_10_58_60_16 changed from on to on
19192020-10-30 11:20:17 INFO (MainThread) [homeassistant.components.automation.4_1_0_sync_state_switch_tv_front_end_with_reality] 4.1.0 Sync state switch tv front-end with reality: Executing step call service
19202020-10-30 11:20:17 INFO (SyncWorker_1) [homeassistant.components.python_script] Executing set_state.py: {'entity_id': 'switch.tv_toggle', 'state': 'on'}
19212020-10-30 11:20:17 INFO (SyncWorker_1) [homeassistant.components.python_script.set_state.py] switch.tv_toggle: state> on
19222020-10-30 11:20:19 INFO (MainThread) [custom_components.visonic.pyvisonic] [data receiver] *** Received validated message 0XAB ***
19232020-10-30 11:20:19 INFO (MainThread) [custom_components.visonic.pyvisonic] [handle_msgtypeAB] ***************************** Got PowerLink Keep-Alive ****************************
19242020-10-30 11:20:19 INFO (MainThread) [custom_components.visonic.pyvisonic] =============================================== Display Status ===============================================
19252020-10-30 11:20:19 INFO (MainThread) [custom_components.visonic.pyvisonic]      key 0  Sensor id=1  dname=Z01  stype=Magnet   zname=Front door     ztypeName=Delay 1    ztamper=0  ztrip=0  bypass=0  lowbatt=0  status=0  tamper=0  enrolled=1  triggered=0 
19262020-10-30 11:20:19 INFO (MainThread) [custom_components.visonic.pyvisonic]      key 1  Sensor id=2  dname=Z02  stype=Motion   zname=Hall           ztypeName=Delay 1    ztamper=0  ztrip=0  bypass=0  lowbatt=0  status=0  tamper=0  enrolled=1  triggered=0 
19272020-10-30 11:20:19 INFO (MainThread) [custom_components.visonic.pyvisonic]      key 2  Sensor id=3  dname=Z03  stype=Motion   zname=Dining room    ztypeName=Perimeter  ztamper=0  ztrip=0  bypass=0  lowbatt=0  status=0  tamper=0  enrolled=1  triggered=0 
19282020-10-30 11:20:19 INFO (MainThread) [custom_components.visonic.pyvisonic]      key 3  Sensor id=4  dname=Z04  stype=Motion   zname=Living room    ztypeName=Perimeter  ztamper=0  ztrip=0  bypass=0  lowbatt=0  status=0  tamper=0  enrolled=1  triggered=0 
19292020-10-30 11:20:19 INFO (MainThread) [custom_components.visonic.pyvisonic]    Model PowerMax Pro           PowerMaster No                     LastEvent None                   Ready   Yes          
19302020-10-30 11:20:19 INFO (MainThread) [custom_components.visonic.pyvisonic]    Mode  Powerlink              Status      Disarmed               Armed     No                     Trouble None              AlarmStatus None        
19312020-10-30 11:20:19 INFO (MainThread) [custom_components.visonic.pyvisonic] ==============================================================================================================
19322020-10-30 11:20:22 INFO (MainThread) [homeassistant.components.automation.4_1_0_sync_state_switch_tv_front_end_with_reality] 4.1.0 Sync state switch tv front-end with reality: Running automation actions
19332020-10-30 11:20:22 INFO (MainThread) [homeassistant.components.automation.4_1_0_sync_state_switch_tv_front_end_with_reality] 4.1.0 Sync state switch tv front-end with reality: Executing step call service
19342020-10-30 11:20:22 INFO (MainThread) [homeassistant.components.system_log.external] 4.1.0 The state of Ping 10.58.60.16 binary_sensor.ping_10_58_60_16 changed from on to on
19352020-10-30 11:20:22 INFO (MainThread) [homeassistant.components.automation.4_1_0_sync_state_switch_tv_front_end_with_reality] 4.1.0 Sync state switch tv front-end with reality: Executing step call service
19362020-10-30 11:20:22 INFO (SyncWorker_36) [homeassistant.components.python_script] Executing set_state.py: {'entity_id': 'switch.tv_toggle', 'state': 'on'}
19372020-10-30 11:20:22 INFO (SyncWorker_36) [homeassistant.components.python_script.set_state.py] switch.tv_toggle: state> on
19382020-10-30 11:20:27 INFO (MainThread) [homeassistant.components.automation.4_1_0_sync_state_switch_tv_front_end_with_reality] 4.1.0 Sync state switch tv front-end with reality: Running automation actions
19392020-10-30 11:20:27 INFO (MainThread) [homeassistant.components.automation.4_1_0_sync_state_switch_tv_front_end_with_reality] 4.1.0 Sync state switch tv front-end with reality: Executing step call service
19402020-10-30 11:20:27 INFO (MainThread) [homeassistant.components.system_log.external] 4.1.0 The state of Ping 10.58.60.16 binary_sensor.ping_10_58_60_16 changed from on to on
19412020-10-30 11:20:27 INFO (MainThread) [homeassistant.components.automation.4_1_0_sync_state_switch_tv_front_end_with_reality] 4.1.0 Sync state switch tv front-end with reality: Executing step call service
19422020-10-30 11:20:27 INFO (SyncWorker_24) [homeassistant.components.python_script] Executing set_state.py: {'entity_id': 'switch.tv_toggle', 'state': 'on'}
19432020-10-30 11:20:27 INFO (SyncWorker_24) [homeassistant.components.python_script.set_state.py] switch.tv_toggle: state> on
19442020-10-30 11:20:32 INFO (MainThread) [homeassistant.components.automation.4_1_0_sync_state_switch_tv_front_end_with_reality] 4.1.0 Sync state switch tv front-end with reality: Running automation actions
19452020-10-30 11:20:32 INFO (MainThread) [homeassistant.components.automation.4_1_0_sync_state_switch_tv_front_end_with_reality] 4.1.0 Sync state switch tv front-end with reality: Executing step call service
19462020-10-30 11:20:32 INFO (MainThread) [homeassistant.components.system_log.external] 4.1.0 The state of Ping 10.58.60.16 binary_sensor.ping_10_58_60_16 changed from on to on
19472020-10-30 11:20:32 INFO (MainThread) [homeassistant.components.automation.4_1_0_sync_state_switch_tv_front_end_with_reality] 4.1.0 Sync state switch tv front-end with reality: Executing step call service
19482020-10-30 11:20:32 INFO (SyncWorker_6) [homeassistant.components.python_script] Executing set_state.py: {'entity_id': 'switch.tv_toggle', 'state': 'on'}
19492020-10-30 11:20:32 INFO (SyncWorker_6) [homeassistant.components.python_script.set_state.py] switch.tv_toggle: state> on
19502020-10-30 11:20:37 INFO (MainThread) [homeassistant.components.automation.4_1_0_sync_state_switch_tv_front_end_with_reality] 4.1.0 Sync state switch tv front-end with reality: Running automation actions
19512020-10-30 11:20:37 INFO (MainThread) [homeassistant.components.automation.4_1_0_sync_state_switch_tv_front_end_with_reality] 4.1.0 Sync state switch tv front-end with reality: Executing step call service
19522020-10-30 11:20:37 INFO (MainThread) [homeassistant.components.system_log.external] 4.1.0 The state of Ping 10.58.60.16 binary_sensor.ping_10_58_60_16 changed from on to on
19532020-10-30 11:20:37 INFO (MainThread) [homeassistant.components.automation.4_1_0_sync_state_switch_tv_front_end_with_reality] 4.1.0 Sync state switch tv front-end with reality: Executing step call service
19542020-10-30 11:20:37 INFO (SyncWorker_51) [homeassistant.components.python_script] Executing set_state.py: {'entity_id': 'switch.tv_toggle', 'state': 'on'}
19552020-10-30 11:20:37 INFO (SyncWorker_51) [homeassistant.components.python_script.set_state.py] switch.tv_toggle: state> on
19562020-10-30 11:20:42 INFO (MainThread) [homeassistant.components.automation.4_1_0_sync_state_switch_tv_front_end_with_reality] 4.1.0 Sync state switch tv front-end with reality: Running automation actions
19572020-10-30 11:20:42 INFO (MainThread) [homeassistant.components.automation.4_1_0_sync_state_switch_tv_front_end_with_reality] 4.1.0 Sync state switch tv front-end with reality: Executing step call service
19582020-10-30 11:20:42 INFO (MainThread) [homeassistant.components.system_log.external] 4.1.0 The state of Ping 10.58.60.16 binary_sensor.ping_10_58_60_16 changed from on to on
19592020-10-30 11:20:42 INFO (MainThread) [homeassistant.components.automation.4_1_0_sync_state_switch_tv_front_end_with_reality] 4.1.0 Sync state switch tv front-end with reality: Executing step call service
19602020-10-30 11:20:42 INFO (SyncWorker_17) [homeassistant.components.python_script] Executing set_state.py: {'entity_id': 'switch.tv_toggle', 'state': 'on'}
19612020-10-30 11:20:42 INFO (SyncWorker_17) [homeassistant.components.python_script.set_state.py] switch.tv_toggle: state> on
19622020-10-30 11:20:43 INFO (SyncWorker_50) [custom_components.samsungtv_encrypted.media_player] RenderingControl uPNP service detected in http://10.58.60.16:7676/MediaRenderer/RenderingControl/Control
19632020-10-30 11:20:43 INFO (SyncWorker_50) [custom_components.samsungtv_encrypted.media_player] MainTVAgent2 uPNP service detected in http://10.58.60.16:7676/smp_19_
19642020-10-30 11:20:47 INFO (MainThread) [homeassistant.components.automation.4_1_0_sync_state_switch_tv_front_end_with_reality] 4.1.0 Sync state switch tv front-end with reality: Running automation actions
19652020-10-30 11:20:47 INFO (MainThread) [homeassistant.components.automation.4_1_0_sync_state_switch_tv_front_end_with_reality] 4.1.0 Sync state switch tv front-end with reality: Executing step call service
19662020-10-30 11:20:47 INFO (MainThread) [homeassistant.components.system_log.external] 4.1.0 The state of Ping 10.58.60.16 binary_sensor.ping_10_58_60_16 changed from on to on
19672020-10-30 11:20:47 INFO (MainThread) [homeassistant.components.automation.4_1_0_sync_state_switch_tv_front_end_with_reality] 4.1.0 Sync state switch tv front-end with reality: Executing step call service
19682020-10-30 11:20:47 INFO (SyncWorker_21) [homeassistant.components.python_script] Executing set_state.py: {'entity_id': 'switch.tv_toggle', 'state': 'on'}
19692020-10-30 11:20:47 INFO (SyncWorker_21) [homeassistant.components.python_script.set_state.py] switch.tv_toggle: state> on
19702020-10-30 11:20:49 INFO (MainThread) [custom_components.visonic.pyvisonic] [data receiver] *** Received validated message 0XAB ***
19712020-10-30 11:20:49 INFO (MainThread) [custom_components.visonic.pyvisonic] [handle_msgtypeAB] ***************************** Got PowerLink Keep-Alive ****************************
19722020-10-30 11:20:49 INFO (MainThread) [custom_components.visonic.pyvisonic] =============================================== Display Status ===============================================
19732020-10-30 11:20:49 INFO (MainThread) [custom_components.visonic.pyvisonic]      key 0  Sensor id=1  dname=Z01  stype=Magnet   zname=Front door     ztypeName=Delay 1    ztamper=0  ztrip=0  bypass=0  lowbatt=0  status=0  tamper=0  enrolled=1  triggered=0 
19742020-10-30 11:20:49 INFO (MainThread) [custom_components.visonic.pyvisonic]      key 1  Sensor id=2  dname=Z02  stype=Motion   zname=Hall           ztypeName=Delay 1    ztamper=0  ztrip=0  bypass=0  lowbatt=0  status=0  tamper=0  enrolled=1  triggered=0 
19752020-10-30 11:20:49 INFO (MainThread) [custom_components.visonic.pyvisonic]      key 2  Sensor id=3  dname=Z03  stype=Motion   zname=Dining room    ztypeName=Perimeter  ztamper=0  ztrip=0  bypass=0  lowbatt=0  status=0  tamper=0  enrolled=1  triggered=0 
19762020-10-30 11:20:49 INFO (MainThread) [custom_components.visonic.pyvisonic]      key 3  Sensor id=4  dname=Z04  stype=Motion   zname=Living room    ztypeName=Perimeter  ztamper=0  ztrip=0  bypass=0  lowbatt=0  status=0  tamper=0  enrolled=1  triggered=0 
19772020-10-30 11:20:49 INFO (MainThread) [custom_components.visonic.pyvisonic]    Model PowerMax Pro           PowerMaster No                     LastEvent None                   Ready   Yes          
19782020-10-30 11:20:49 INFO (MainThread) [custom_components.visonic.pyvisonic]    Mode  Powerlink              Status      Disarmed               Armed     No                     Trouble None              AlarmStatus None        
19792020-10-30 11:20:49 INFO (MainThread) [custom_components.visonic.pyvisonic] ==============================================================================================================
19802020-10-30 11:20:53 INFO (MainThread) [homeassistant.components.automation.4_1_0_sync_state_switch_tv_front_end_with_reality] 4.1.0 Sync state switch tv front-end with reality: Running automation actions
19812020-10-30 11:20:53 INFO (MainThread) [homeassistant.components.automation.4_1_0_sync_state_switch_tv_front_end_with_reality] 4.1.0 Sync state switch tv front-end with reality: Executing step call service
19822020-10-30 11:20:53 INFO (MainThread) [homeassistant.components.system_log.external] 4.1.0 The state of Ping 10.58.60.16 binary_sensor.ping_10_58_60_16 changed from on to on
19832020-10-30 11:20:53 INFO (MainThread) [homeassistant.components.automation.4_1_0_sync_state_switch_tv_front_end_with_reality] 4.1.0 Sync state switch tv front-end with reality: Executing step call service
19842020-10-30 11:20:53 INFO (SyncWorker_1) [homeassistant.components.python_script] Executing set_state.py: {'entity_id': 'switch.tv_toggle', 'state': 'on'}
19852020-10-30 11:20:53 INFO (SyncWorker_1) [homeassistant.components.python_script.set_state.py] switch.tv_toggle: state> on
19862020-10-30 11:20:58 INFO (MainThread) [homeassistant.components.automation.4_1_0_sync_state_switch_tv_front_end_with_reality] 4.1.0 Sync state switch tv front-end with reality: Running automation actions
19872020-10-30 11:20:58 INFO (MainThread) [homeassistant.components.automation.4_1_0_sync_state_switch_tv_front_end_with_reality] 4.1.0 Sync state switch tv front-end with reality: Executing step call service
19882020-10-30 11:20:58 INFO (MainThread) [homeassistant.components.system_log.external] 4.1.0 The state of Ping 10.58.60.16 binary_sensor.ping_10_58_60_16 changed from on to on
19892020-10-30 11:20:58 INFO (MainThread) [homeassistant.components.automation.4_1_0_sync_state_switch_tv_front_end_with_reality] 4.1.0 Sync state switch tv front-end with reality: Executing step call service
19902020-10-30 11:20:58 INFO (SyncWorker_11) [homeassistant.components.python_script] Executing set_state.py: {'entity_id': 'switch.tv_toggle', 'state': 'on'}
19912020-10-30 11:20:58 INFO (SyncWorker_11) [homeassistant.components.python_script.set_state.py] switch.tv_toggle: state> on
19922020-10-30 11:21:03 INFO (MainThread) [homeassistant.components.automation.4_1_0_sync_state_switch_tv_front_end_with_reality] 4.1.0 Sync state switch tv front-end with reality: Running automation actions
19932020-10-30 11:21:03 INFO (MainThread) [homeassistant.components.automation.4_1_0_sync_state_switch_tv_front_end_with_reality] 4.1.0 Sync state switch tv front-end with reality: Executing step call service
19942020-10-30 11:21:03 INFO (MainThread) [homeassistant.components.system_log.external] 4.1.0 The state of Ping 10.58.60.16 binary_sensor.ping_10_58_60_16 changed from on to on
19952020-10-30 11:21:03 INFO (MainThread) [homeassistant.components.automation.4_1_0_sync_state_switch_tv_front_end_with_reality] 4.1.0 Sync state switch tv front-end with reality: Executing step call service
19962020-10-30 11:21:03 INFO (SyncWorker_24) [homeassistant.components.python_script] Executing set_state.py: {'entity_id': 'switch.tv_toggle', 'state': 'on'}
19972020-10-30 11:21:03 INFO (SyncWorker_24) [homeassistant.components.python_script.set_state.py] switch.tv_toggle: state> on
19982020-10-30 11:21:08 INFO (MainThread) [homeassistant.components.automation.4_1_0_sync_state_switch_tv_front_end_with_reality] 4.1.0 Sync state switch tv front-end with reality: Running automation actions
19992020-10-30 11:21:08 INFO (MainThread) [homeassistant.components.automation.4_1_0_sync_state_switch_tv_front_end_with_reality] 4.1.0 Sync state switch tv front-end with reality: Executing step call service
20002020-10-30 11:21:08 INFO (MainThread) [homeassistant.components.system_log.external] 4.1.0 The state of Ping 10.58.60.16 binary_sensor.ping_10_58_60_16 changed from on to on
20012020-10-30 11:21:08 INFO (MainThread) [homeassistant.components.automation.4_1_0_sync_state_switch_tv_front_end_with_reality] 4.1.0 Sync state switch tv front-end with reality: Executing step call service
20022020-10-30 11:21:08 INFO (SyncWorker_9) [homeassistant.components.python_script] Executing set_state.py: {'entity_id': 'switch.tv_toggle', 'state': 'on'}
20032020-10-30 11:21:08 INFO (SyncWorker_9) [homeassistant.components.python_script.set_state.py] switch.tv_toggle: state> on
20042020-10-30 11:21:13 INFO (MainThread) [homeassistant.components.automation.4_1_0_sync_state_switch_tv_front_end_with_reality] 4.1.0 Sync state switch tv front-end with reality: Running automation actions
20052020-10-30 11:21:13 INFO (MainThread) [homeassistant.components.automation.4_1_0_sync_state_switch_tv_front_end_with_reality] 4.1.0 Sync state switch tv front-end with reality: Executing step call service
20062020-10-30 11:21:13 INFO (MainThread) [homeassistant.components.system_log.external] 4.1.0 The state of Ping 10.58.60.16 binary_sensor.ping_10_58_60_16 changed from on to on
20072020-10-30 11:21:13 INFO (MainThread) [homeassistant.components.automation.4_1_0_sync_state_switch_tv_front_end_with_reality] 4.1.0 Sync state switch tv front-end with reality: Executing step call service
20082020-10-30 11:21:13 INFO (SyncWorker_16) [homeassistant.components.python_script] Executing set_state.py: {'entity_id': 'switch.tv_toggle', 'state': 'on'}
20092020-10-30 11:21:13 INFO (SyncWorker_16) [homeassistant.components.python_script.set_state.py] switch.tv_toggle: state> on
20102020-10-30 11:21:18 INFO (MainThread) [homeassistant.components.automation.4_1_0_sync_state_switch_tv_front_end_with_reality] 4.1.0 Sync state switch tv front-end with reality: Running automation actions
20112020-10-30 11:21:18 INFO (MainThread) [homeassistant.components.automation.4_1_0_sync_state_switch_tv_front_end_with_reality] 4.1.0 Sync state switch tv front-end with reality: Executing step call service
20122020-10-30 11:21:18 INFO (MainThread) [homeassistant.components.system_log.external] 4.1.0 The state of Ping 10.58.60.16 binary_sensor.ping_10_58_60_16 changed from on to on
20132020-10-30 11:21:18 INFO (MainThread) [homeassistant.components.automation.4_1_0_sync_state_switch_tv_front_end_with_reality] 4.1.0 Sync state switch tv front-end with reality: Executing step call service
20142020-10-30 11:21:18 INFO (SyncWorker_25) [homeassistant.components.python_script] Executing set_state.py: {'entity_id': 'switch.tv_toggle', 'state': 'on'}
20152020-10-30 11:21:18 INFO (SyncWorker_25) [homeassistant.components.python_script.set_state.py] switch.tv_toggle: state> on
20162020-10-30 11:21:19 INFO (MainThread) [custom_components.visonic.pyvisonic] [data receiver] *** Received validated message 0XAB ***
20172020-10-30 11:21:19 INFO (MainThread) [custom_components.visonic.pyvisonic] [handle_msgtypeAB] ***************************** Got PowerLink Keep-Alive ****************************
20182020-10-30 11:21:19 INFO (MainThread) [custom_components.visonic.pyvisonic] =============================================== Display Status ===============================================
20192020-10-30 11:21:19 INFO (MainThread) [custom_components.visonic.pyvisonic]      key 0  Sensor id=1  dname=Z01  stype=Magnet   zname=Front door     ztypeName=Delay 1    ztamper=0  ztrip=0  bypass=0  lowbatt=0  status=0  tamper=0  enrolled=1  triggered=0 
20202020-10-30 11:21:19 INFO (MainThread) [custom_components.visonic.pyvisonic]      key 1  Sensor id=2  dname=Z02  stype=Motion   zname=Hall           ztypeName=Delay 1    ztamper=0  ztrip=0  bypass=0  lowbatt=0  status=0  tamper=0  enrolled=1  triggered=0 
20212020-10-30 11:21:19 INFO (MainThread) [custom_components.visonic.pyvisonic]      key 2  Sensor id=3  dname=Z03  stype=Motion   zname=Dining room    ztypeName=Perimeter  ztamper=0  ztrip=0  bypass=0  lowbatt=0  status=0  tamper=0  enrolled=1  triggered=0 
20222020-10-30 11:21:19 INFO (MainThread) [custom_components.visonic.pyvisonic]      key 3  Sensor id=4  dname=Z04  stype=Motion   zname=Living room    ztypeName=Perimeter  ztamper=0  ztrip=0  bypass=0  lowbatt=0  status=0  tamper=0  enrolled=1  triggered=0 
20232020-10-30 11:21:19 INFO (MainThread) [custom_components.visonic.pyvisonic]    Model PowerMax Pro           PowerMaster No                     LastEvent None                   Ready   Yes          
20242020-10-30 11:21:19 INFO (MainThread) [custom_components.visonic.pyvisonic]    Mode  Powerlink              Status      Disarmed               Armed     No                     Trouble None              AlarmStatus None        
20252020-10-30 11:21:19 INFO (MainThread) [custom_components.visonic.pyvisonic] ==============================================================================================================
20262020-10-30 11:21:23 INFO (MainThread) [homeassistant.components.automation.4_1_0_sync_state_switch_tv_front_end_with_reality] 4.1.0 Sync state switch tv front-end with reality: Running automation actions
20272020-10-30 11:21:23 INFO (MainThread) [homeassistant.components.automation.4_1_0_sync_state_switch_tv_front_end_with_reality] 4.1.0 Sync state switch tv front-end with reality: Executing step call service
20282020-10-30 11:21:23 INFO (MainThread) [homeassistant.components.system_log.external] 4.1.0 The state of Ping 10.58.60.16 binary_sensor.ping_10_58_60_16 changed from on to on
20292020-10-30 11:21:23 INFO (MainThread) [homeassistant.components.automation.4_1_0_sync_state_switch_tv_front_end_with_reality] 4.1.0 Sync state switch tv front-end with reality: Executing step call service
20302020-10-30 11:21:23 INFO (SyncWorker_17) [homeassistant.components.python_script] Executing set_state.py: {'entity_id': 'switch.tv_toggle', 'state': 'on'}
20312020-10-30 11:21:23 INFO (SyncWorker_17) [homeassistant.components.python_script.set_state.py] switch.tv_toggle: state> on
20322020-10-30 11:21:28 INFO (MainThread) [homeassistant.components.automation.4_1_0_sync_state_switch_tv_front_end_with_reality] 4.1.0 Sync state switch tv front-end with reality: Running automation actions
20332020-10-30 11:21:28 INFO (MainThread) [homeassistant.components.automation.4_1_0_sync_state_switch_tv_front_end_with_reality] 4.1.0 Sync state switch tv front-end with reality: Executing step call service
20342020-10-30 11:21:28 INFO (MainThread) [homeassistant.components.system_log.external] 4.1.0 The state of Ping 10.58.60.16 binary_sensor.ping_10_58_60_16 changed from on to on
20352020-10-30 11:21:28 INFO (MainThread) [homeassistant.components.automation.4_1_0_sync_state_switch_tv_front_end_with_reality] 4.1.0 Sync state switch tv front-end with reality: Executing step call service
20362020-10-30 11:21:28 INFO (SyncWorker_38) [homeassistant.components.python_script] Executing set_state.py: {'entity_id': 'switch.tv_toggle', 'state': 'on'}
20372020-10-30 11:21:28 INFO (SyncWorker_38) [homeassistant.components.python_script.set_state.py] switch.tv_toggle: state> on
20382020-10-30 11:21:33 INFO (MainThread) [homeassistant.components.automation.4_1_0_sync_state_switch_tv_front_end_with_reality] 4.1.0 Sync state switch tv front-end with reality: Running automation actions
20392020-10-30 11:21:33 INFO (MainThread) [homeassistant.components.automation.4_1_0_sync_state_switch_tv_front_end_with_reality] 4.1.0 Sync state switch tv front-end with reality: Executing step call service
20402020-10-30 11:21:33 INFO (MainThread) [homeassistant.components.system_log.external] 4.1.0 The state of Ping 10.58.60.16 binary_sensor.ping_10_58_60_16 changed from on to on
20412020-10-30 11:21:33 INFO (MainThread) [homeassistant.components.automation.4_1_0_sync_state_switch_tv_front_end_with_reality] 4.1.0 Sync state switch tv front-end with reality: Executing step call service
20422020-10-30 11:21:33 INFO (SyncWorker_43) [homeassistant.components.python_script] Executing set_state.py: {'entity_id': 'switch.tv_toggle', 'state': 'on'}
20432020-10-30 11:21:33 INFO (SyncWorker_43) [homeassistant.components.python_script.set_state.py] switch.tv_toggle: state> on
20442020-10-30 11:21:38 INFO (MainThread) [homeassistant.components.automation.4_1_0_sync_state_switch_tv_front_end_with_reality] 4.1.0 Sync state switch tv front-end with reality: Running automation actions
20452020-10-30 11:21:38 INFO (MainThread) [homeassistant.components.automation.4_1_0_sync_state_switch_tv_front_end_with_reality] 4.1.0 Sync state switch tv front-end with reality: Executing step call service
20462020-10-30 11:21:38 INFO (MainThread) [homeassistant.components.system_log.external] 4.1.0 The state of Ping 10.58.60.16 binary_sensor.ping_10_58_60_16 changed from on to on
20472020-10-30 11:21:38 INFO (MainThread) [homeassistant.components.automation.4_1_0_sync_state_switch_tv_front_end_with_reality] 4.1.0 Sync state switch tv front-end with reality: Executing step call service
20482020-10-30 11:21:38 INFO (SyncWorker_41) [homeassistant.components.python_script] Executing set_state.py: {'entity_id': 'switch.tv_toggle', 'state': 'on'}
20492020-10-30 11:21:38 INFO (SyncWorker_41) [homeassistant.components.python_script.set_state.py] switch.tv_toggle: state> on
20502020-10-30 11:21:43 INFO (MainThread) [homeassistant.components.automation.4_1_0_sync_state_switch_tv_front_end_with_reality] 4.1.0 Sync state switch tv front-end with reality: Running automation actions
20512020-10-30 11:21:43 INFO (MainThread) [homeassistant.components.automation.4_1_0_sync_state_switch_tv_front_end_with_reality] 4.1.0 Sync state switch tv front-end with reality: Executing step call service
20522020-10-30 11:21:43 INFO (MainThread) [homeassistant.components.system_log.external] 4.1.0 The state of Ping 10.58.60.16 binary_sensor.ping_10_58_60_16 changed from on to on
20532020-10-30 11:21:43 INFO (MainThread) [homeassistant.components.automation.4_1_0_sync_state_switch_tv_front_end_with_reality] 4.1.0 Sync state switch tv front-end with reality: Executing step call service
20542020-10-30 11:21:43 INFO (SyncWorker_36) [homeassistant.components.python_script] Executing set_state.py: {'entity_id': 'switch.tv_toggle', 'state': 'on'}
20552020-10-30 11:21:43 INFO (SyncWorker_36) [homeassistant.components.python_script.set_state.py] switch.tv_toggle: state> on
20562020-10-30 11:21:48 INFO (MainThread) [homeassistant.components.automation.4_1_0_sync_state_switch_tv_front_end_with_reality] 4.1.0 Sync state switch tv front-end with reality: Running automation actions
20572020-10-30 11:21:48 INFO (MainThread) [homeassistant.components.automation.4_1_0_sync_state_switch_tv_front_end_with_reality] 4.1.0 Sync state switch tv front-end with reality: Executing step call service
20582020-10-30 11:21:48 INFO (MainThread) [homeassistant.components.system_log.external] 4.1.0 The state of Ping 10.58.60.16 binary_sensor.ping_10_58_60_16 changed from on to on
20592020-10-30 11:21:48 INFO (MainThread) [homeassistant.components.automation.4_1_0_sync_state_switch_tv_front_end_with_reality] 4.1.0 Sync state switch tv front-end with reality: Executing step call service
20602020-10-30 11:21:48 INFO (SyncWorker_29) [homeassistant.components.python_script] Executing set_state.py: {'entity_id': 'switch.tv_toggle', 'state': 'on'}
20612020-10-30 11:21:48 INFO (SyncWorker_29) [homeassistant.components.python_script.set_state.py] switch.tv_toggle: state> on
20622020-10-30 11:21:49 INFO (MainThread) [custom_components.visonic.pyvisonic] [data receiver] *** Received validated message 0XAB ***
20632020-10-30 11:21:49 INFO (MainThread) [custom_components.visonic.pyvisonic] [handle_msgtypeAB] ***************************** Got PowerLink Keep-Alive ****************************
20642020-10-30 11:21:49 INFO (MainThread) [custom_components.visonic.pyvisonic] =============================================== Display Status ===============================================
20652020-10-30 11:21:49 INFO (MainThread) [custom_components.visonic.pyvisonic]      key 0  Sensor id=1  dname=Z01  stype=Magnet   zname=Front door     ztypeName=Delay 1    ztamper=0  ztrip=0  bypass=0  lowbatt=0  status=0  tamper=0  enrolled=1  triggered=0 
20662020-10-30 11:21:49 INFO (MainThread) [custom_components.visonic.pyvisonic]      key 1  Sensor id=2  dname=Z02  stype=Motion   zname=Hall           ztypeName=Delay 1    ztamper=0  ztrip=0  bypass=0  lowbatt=0  status=0  tamper=0  enrolled=1  triggered=0 
20672020-10-30 11:21:49 INFO (MainThread) [custom_components.visonic.pyvisonic]      key 2  Sensor id=3  dname=Z03  stype=Motion   zname=Dining room    ztypeName=Perimeter  ztamper=0  ztrip=0  bypass=0  lowbatt=0  status=0  tamper=0  enrolled=1  triggered=0 
20682020-10-30 11:21:49 INFO (MainThread) [custom_components.visonic.pyvisonic]      key 3  Sensor id=4  dname=Z04  stype=Motion   zname=Living room    ztypeName=Perimeter  ztamper=0  ztrip=0  bypass=0  lowbatt=0  status=0  tamper=0  enrolled=1  triggered=0 
20692020-10-30 11:21:49 INFO (MainThread) [custom_components.visonic.pyvisonic]    Model PowerMax Pro           PowerMaster No                     LastEvent None                   Ready   Yes          
20702020-10-30 11:21:49 INFO (MainThread) [custom_components.visonic.pyvisonic]    Mode  Powerlink              Status      Disarmed               Armed     No                     Trouble None              AlarmStatus None        
20712020-10-30 11:21:49 INFO (MainThread) [custom_components.visonic.pyvisonic] ==============================================================================================================
20722020-10-30 11:21:53 INFO (MainThread) [homeassistant.components.automation.4_1_0_sync_state_switch_tv_front_end_with_reality] 4.1.0 Sync state switch tv front-end with reality: Running automation actions
20732020-10-30 11:21:53 INFO (MainThread) [homeassistant.components.automation.4_1_0_sync_state_switch_tv_front_end_with_reality] 4.1.0 Sync state switch tv front-end with reality: Executing step call service
20742020-10-30 11:21:53 INFO (MainThread) [homeassistant.components.system_log.external] 4.1.0 The state of Ping 10.58.60.16 binary_sensor.ping_10_58_60_16 changed from on to on
20752020-10-30 11:21:53 INFO (MainThread) [homeassistant.components.automation.4_1_0_sync_state_switch_tv_front_end_with_reality] 4.1.0 Sync state switch tv front-end with reality: Executing step call service
20762020-10-30 11:21:53 INFO (SyncWorker_28) [homeassistant.components.python_script] Executing set_state.py: {'entity_id': 'switch.tv_toggle', 'state': 'on'}
20772020-10-30 11:21:53 INFO (SyncWorker_28) [homeassistant.components.python_script.set_state.py] switch.tv_toggle: state> on
20782020-10-30 11:21:58 INFO (MainThread) [homeassistant.components.automation.4_1_0_sync_state_switch_tv_front_end_with_reality] 4.1.0 Sync state switch tv front-end with reality: Running automation actions
20792020-10-30 11:21:58 INFO (MainThread) [homeassistant.components.automation.4_1_0_sync_state_switch_tv_front_end_with_reality] 4.1.0 Sync state switch tv front-end with reality: Executing step call service
20802020-10-30 11:21:58 INFO (MainThread) [homeassistant.components.system_log.external] 4.1.0 The state of Ping 10.58.60.16 binary_sensor.ping_10_58_60_16 changed from on to on
20812020-10-30 11:21:58 INFO (MainThread) [homeassistant.components.automation.4_1_0_sync_state_switch_tv_front_end_with_reality] 4.1.0 Sync state switch tv front-end with reality: Executing step call service
20822020-10-30 11:21:58 INFO (SyncWorker_51) [homeassistant.components.python_script] Executing set_state.py: {'entity_id': 'switch.tv_toggle', 'state': 'on'}
20832020-10-30 11:21:58 INFO (SyncWorker_51) [homeassistant.components.python_script.set_state.py] switch.tv_toggle: state> on
20842020-10-30 11:22:03 INFO (MainThread) [homeassistant.components.automation.4_1_0_sync_state_switch_tv_front_end_with_reality] 4.1.0 Sync state switch tv front-end with reality: Running automation actions
20852020-10-30 11:22:03 INFO (MainThread) [homeassistant.components.automation.4_1_0_sync_state_switch_tv_front_end_with_reality] 4.1.0 Sync state switch tv front-end with reality: Executing step call service
20862020-10-30 11:22:03 INFO (MainThread) [homeassistant.components.system_log.external] 4.1.0 The state of Ping 10.58.60.16 binary_sensor.ping_10_58_60_16 changed from on to on
20872020-10-30 11:22:03 INFO (MainThread) [homeassistant.components.automation.4_1_0_sync_state_switch_tv_front_end_with_reality] 4.1.0 Sync state switch tv front-end with reality: Executing step call service
20882020-10-30 11:22:03 INFO (SyncWorker_35) [homeassistant.components.python_script] Executing set_state.py: {'entity_id': 'switch.tv_toggle', 'state': 'on'}
20892020-10-30 11:22:03 INFO (SyncWorker_35) [homeassistant.components.python_script.set_state.py] switch.tv_toggle: state> on
20902020-10-30 11:22:08 INFO (MainThread) [homeassistant.components.automation.4_1_0_sync_state_switch_tv_front_end_with_reality] 4.1.0 Sync state switch tv front-end with reality: Running automation actions
20912020-10-30 11:22:08 INFO (MainThread) [homeassistant.components.automation.4_1_0_sync_state_switch_tv_front_end_with_reality] 4.1.0 Sync state switch tv front-end with reality: Executing step call service
20922020-10-30 11:22:08 INFO (MainThread) [homeassistant.components.system_log.external] 4.1.0 The state of Ping 10.58.60.16 binary_sensor.ping_10_58_60_16 changed from on to on
20932020-10-30 11:22:08 INFO (MainThread) [homeassistant.components.automation.4_1_0_sync_state_switch_tv_front_end_with_reality] 4.1.0 Sync state switch tv front-end with reality: Executing step call service
20942020-10-30 11:22:08 INFO (SyncWorker_18) [homeassistant.components.python_script] Executing set_state.py: {'entity_id': 'switch.tv_toggle', 'state': 'on'}
20952020-10-30 11:22:08 INFO (SyncWorker_18) [homeassistant.components.python_script.set_state.py] switch.tv_toggle: state> on
20962020-10-30 11:22:13 INFO (MainThread) [homeassistant.components.automation.4_1_0_sync_state_switch_tv_front_end_with_reality] 4.1.0 Sync state switch tv front-end with reality: Running automation actions
20972020-10-30 11:22:13 INFO (MainThread) [homeassistant.components.automation.4_1_0_sync_state_switch_tv_front_end_with_reality] 4.1.0 Sync state switch tv front-end with reality: Executing step call service
20982020-10-30 11:22:13 INFO (MainThread) [homeassistant.components.system_log.external] 4.1.0 The state of Ping 10.58.60.16 binary_sensor.ping_10_58_60_16 changed from on to on
20992020-10-30 11:22:13 INFO (MainThread) [homeassistant.components.automation.4_1_0_sync_state_switch_tv_front_end_with_reality] 4.1.0 Sync state switch tv front-end with reality: Executing step call service
21002020-10-30 11:22:13 INFO (SyncWorker_32) [homeassistant.components.python_script] Executing set_state.py: {'entity_id': 'switch.tv_toggle', 'state': 'on'}
21012020-10-30 11:22:13 INFO (SyncWorker_32) [homeassistant.components.python_script.set_state.py] switch.tv_toggle: state> on
21022020-10-30 11:22:18 INFO (MainThread) [homeassistant.components.automation.4_1_0_sync_state_switch_tv_front_end_with_reality] 4.1.0 Sync state switch tv front-end with reality: Running automation actions
21032020-10-30 11:22:18 INFO (MainThread) [homeassistant.components.automation.4_1_0_sync_state_switch_tv_front_end_with_reality] 4.1.0 Sync state switch tv front-end with reality: Executing step call service
21042020-10-30 11:22:18 INFO (MainThread) [homeassistant.components.system_log.external] 4.1.0 The state of Ping 10.58.60.16 binary_sensor.ping_10_58_60_16 changed from on to on
21052020-10-30 11:22:18 INFO (MainThread) [homeassistant.components.automation.4_1_0_sync_state_switch_tv_front_end_with_reality] 4.1.0 Sync state switch tv front-end with reality: Executing step call service
21062020-10-30 11:22:18 INFO (SyncWorker_47) [homeassistant.components.python_script] Executing set_state.py: {'entity_id': 'switch.tv_toggle', 'state': 'on'}
21072020-10-30 11:22:18 INFO (SyncWorker_47) [homeassistant.components.python_script.set_state.py] switch.tv_toggle: state> on
21082020-10-30 11:22:19 INFO (MainThread) [custom_components.visonic.pyvisonic] [data receiver] *** Received validated message 0XAB ***
21092020-10-30 11:22:19 INFO (MainThread) [custom_components.visonic.pyvisonic] [handle_msgtypeAB] ***************************** Got PowerLink Keep-Alive ****************************
21102020-10-30 11:22:19 INFO (MainThread) [custom_components.visonic.pyvisonic] =============================================== Display Status ===============================================
21112020-10-30 11:22:19 INFO (MainThread) [custom_components.visonic.pyvisonic]      key 0  Sensor id=1  dname=Z01  stype=Magnet   zname=Front door     ztypeName=Delay 1    ztamper=0  ztrip=0  bypass=0  lowbatt=0  status=0  tamper=0  enrolled=1  triggered=0 
21122020-10-30 11:22:19 INFO (MainThread) [custom_components.visonic.pyvisonic]      key 1  Sensor id=2  dname=Z02  stype=Motion   zname=Hall           ztypeName=Delay 1    ztamper=0  ztrip=0  bypass=0  lowbatt=0  status=0  tamper=0  enrolled=1  triggered=0 
21132020-10-30 11:22:19 INFO (MainThread) [custom_components.visonic.pyvisonic]      key 2  Sensor id=3  dname=Z03  stype=Motion   zname=Dining room    ztypeName=Perimeter  ztamper=0  ztrip=0  bypass=0  lowbatt=0  status=0  tamper=0  enrolled=1  triggered=0 
21142020-10-30 11:22:19 INFO (MainThread) [custom_components.visonic.pyvisonic]      key 3  Sensor id=4  dname=Z04  stype=Motion   zname=Living room    ztypeName=Perimeter  ztamper=0  ztrip=0  bypass=0  lowbatt=0  status=0  tamper=0  enrolled=1  triggered=0 
21152020-10-30 11:22:19 INFO (MainThread) [custom_components.visonic.pyvisonic]    Model PowerMax Pro           PowerMaster No                     LastEvent None                   Ready   Yes          
21162020-10-30 11:22:19 INFO (MainThread) [custom_components.visonic.pyvisonic]    Mode  Powerlink              Status      Disarmed               Armed     No                     Trouble None              AlarmStatus None        
21172020-10-30 11:22:19 INFO (MainThread) [custom_components.visonic.pyvisonic] ==============================================================================================================
21182020-10-30 11:22:23 INFO (MainThread) [homeassistant.components.automation.4_1_0_sync_state_switch_tv_front_end_with_reality] 4.1.0 Sync state switch tv front-end with reality: Running automation actions
21192020-10-30 11:22:23 INFO (MainThread) [homeassistant.components.automation.4_1_0_sync_state_switch_tv_front_end_with_reality] 4.1.0 Sync state switch tv front-end with reality: Executing step call service
21202020-10-30 11:22:23 INFO (MainThread) [homeassistant.components.system_log.external] 4.1.0 The state of Ping 10.58.60.16 binary_sensor.ping_10_58_60_16 changed from on to on
21212020-10-30 11:22:23 INFO (MainThread) [homeassistant.components.automation.4_1_0_sync_state_switch_tv_front_end_with_reality] 4.1.0 Sync state switch tv front-end with reality: Executing step call service
21222020-10-30 11:22:23 INFO (SyncWorker_0) [homeassistant.components.python_script] Executing set_state.py: {'entity_id': 'switch.tv_toggle', 'state': 'on'}
21232020-10-30 11:22:23 INFO (SyncWorker_0) [homeassistant.components.python_script.set_state.py] switch.tv_toggle: state> on
21242020-10-30 11:22:28 INFO (MainThread) [homeassistant.components.automation.4_1_0_sync_state_switch_tv_front_end_with_reality] 4.1.0 Sync state switch tv front-end with reality: Running automation actions
21252020-10-30 11:22:28 INFO (MainThread) [homeassistant.components.automation.4_1_0_sync_state_switch_tv_front_end_with_reality] 4.1.0 Sync state switch tv front-end with reality: Executing step call service
21262020-10-30 11:22:28 INFO (MainThread) [homeassistant.components.system_log.external] 4.1.0 The state of Ping 10.58.60.16 binary_sensor.ping_10_58_60_16 changed from on to on
21272020-10-30 11:22:28 INFO (MainThread) [homeassistant.components.automation.4_1_0_sync_state_switch_tv_front_end_with_reality] 4.1.0 Sync state switch tv front-end with reality: Executing step call service
21282020-10-30 11:22:28 INFO (SyncWorker_36) [homeassistant.components.python_script] Executing set_state.py: {'entity_id': 'switch.tv_toggle', 'state': 'on'}
21292020-10-30 11:22:28 INFO (SyncWorker_36) [homeassistant.components.python_script.set_state.py] switch.tv_toggle: state> on
21302020-10-30 11:22:31 INFO (MainThread) [custom_components.visonic.pyvisonic] [data receiver] *** Received validated message 0XA5 ***
21312020-10-30 11:22:32 INFO (MainThread) [homeassistant.components.automation.6_3_0_switch_to_off_input_boolean_en_restart_timer_to_delay_switch_tv_als_niemand_in_woonkamer] 6.3.0 Switch to Off Input_Boolean en Restart Timer to Delay Switch TV Als niemand in woonkamer: Running automation actions
21322020-10-30 11:22:32 INFO (MainThread) [homeassistant.components.automation.6_3_0_switch_to_off_input_boolean_en_restart_timer_to_delay_switch_tv_als_niemand_in_woonkamer] 6.3.0 Switch to Off Input_Boolean en Restart Timer to Delay Switch TV Als niemand in woonkamer: Executing step call service
21332020-10-30 11:22:32 INFO (MainThread) [homeassistant.components.automation.6_3_0_switch_to_off_input_boolean_en_restart_timer_to_delay_switch_tv_als_niemand_in_woonkamer] 6.3.0 Switch to Off Input_Boolean en Restart Timer to Delay Switch TV Als niemand in woonkamer: Executing step call service
21342020-10-30 11:22:32 INFO (MainThread) [homeassistant.components.automation.6_3_0_switch_to_off_input_boolean_en_restart_timer_to_delay_switch_tv_als_niemand_in_woonkamer] 6.3.0 Switch to Off Input_Boolean en Restart Timer to Delay Switch TV Als niemand in woonkamer: Executing step call service
21352020-10-30 11:22:32 INFO (MainThread) [homeassistant.components.automation.6_3_0_switch_to_off_input_boolean_en_restart_timer_to_delay_switch_tv_als_niemand_in_woonkamer] 6.3.0 Switch to Off Input_Boolean en Restart Timer to Delay Switch TV Als niemand in woonkamer: Executing step call service
21362020-10-30 11:22:32 WARNING (MainThread) [homeassistant.components.system_log.external] The state of visonic_z04 binary_sensor.visonic_z04 changed from off to on. The entity binary_sensor.visonic_z04 moved to timer.start
21372020-10-30 11:22:33 INFO (MainThread) [homeassistant.components.automation.4_1_0_sync_state_switch_tv_front_end_with_reality] 4.1.0 Sync state switch tv front-end with reality: Running automation actions
21382020-10-30 11:22:33 INFO (MainThread) [homeassistant.components.automation.4_1_0_sync_state_switch_tv_front_end_with_reality] 4.1.0 Sync state switch tv front-end with reality: Executing step call service
21392020-10-30 11:22:33 INFO (MainThread) [homeassistant.components.system_log.external] 4.1.0 The state of Ping 10.58.60.16 binary_sensor.ping_10_58_60_16 changed from on to on
21402020-10-30 11:22:33 INFO (MainThread) [homeassistant.components.automation.4_1_0_sync_state_switch_tv_front_end_with_reality] 4.1.0 Sync state switch tv front-end with reality: Executing step call service
21412020-10-30 11:22:33 INFO (SyncWorker_28) [homeassistant.components.python_script] Executing set_state.py: {'entity_id': 'switch.tv_toggle', 'state': 'on'}
21422020-10-30 11:22:33 INFO (SyncWorker_28) [homeassistant.components.python_script.set_state.py] switch.tv_toggle: state> on
21432020-10-30 11:22:38 INFO (MainThread) [homeassistant.components.automation.4_1_0_sync_state_switch_tv_front_end_with_reality] 4.1.0 Sync state switch tv front-end with reality: Running automation actions
21442020-10-30 11:22:38 INFO (MainThread) [homeassistant.components.automation.4_1_0_sync_state_switch_tv_front_end_with_reality] 4.1.0 Sync state switch tv front-end with reality: Executing step call service
21452020-10-30 11:22:38 INFO (MainThread) [homeassistant.components.system_log.external] 4.1.0 The state of Ping 10.58.60.16 binary_sensor.ping_10_58_60_16 changed from on to on
21462020-10-30 11:22:38 INFO (MainThread) [homeassistant.components.automation.4_1_0_sync_state_switch_tv_front_end_with_reality] 4.1.0 Sync state switch tv front-end with reality: Executing step call service
21472020-10-30 11:22:38 INFO (SyncWorker_51) [homeassistant.components.python_script] Executing set_state.py: {'entity_id': 'switch.tv_toggle', 'state': 'on'}
21482020-10-30 11:22:38 INFO (SyncWorker_51) [homeassistant.components.python_script.set_state.py] switch.tv_toggle: state> on
21492020-10-30 11:22:43 INFO (MainThread) [homeassistant.components.automation.4_1_0_sync_state_switch_tv_front_end_with_reality] 4.1.0 Sync state switch tv front-end with reality: Running automation actions
21502020-10-30 11:22:43 INFO (MainThread) [homeassistant.components.automation.4_1_0_sync_state_switch_tv_front_end_with_reality] 4.1.0 Sync state switch tv front-end with reality: Executing step call service
21512020-10-30 11:22:43 INFO (MainThread) [homeassistant.components.system_log.external] 4.1.0 The state of Ping 10.58.60.16 binary_sensor.ping_10_58_60_16 changed from on to on
21522020-10-30 11:22:43 INFO (MainThread) [homeassistant.components.automation.4_1_0_sync_state_switch_tv_front_end_with_reality] 4.1.0 Sync state switch tv front-end with reality: Executing step call service
21532020-10-30 11:22:43 INFO (SyncWorker_35) [homeassistant.components.python_script] Executing set_state.py: {'entity_id': 'switch.tv_toggle', 'state': 'on'}
21542020-10-30 11:22:43 INFO (SyncWorker_35) [homeassistant.components.python_script.set_state.py] switch.tv_toggle: state> on
21552020-10-30 11:22:48 INFO (MainThread) [homeassistant.components.automation.4_1_0_sync_state_switch_tv_front_end_with_reality] 4.1.0 Sync state switch tv front-end with reality: Running automation actions
21562020-10-30 11:22:48 INFO (MainThread) [homeassistant.components.automation.4_1_0_sync_state_switch_tv_front_end_with_reality] 4.1.0 Sync state switch tv front-end with reality: Executing step call service
21572020-10-30 11:22:48 INFO (MainThread) [homeassistant.components.system_log.external] 4.1.0 The state of Ping 10.58.60.16 binary_sensor.ping_10_58_60_16 changed from on to on
21582020-10-30 11:22:48 INFO (MainThread) [homeassistant.components.automation.4_1_0_sync_state_switch_tv_front_end_with_reality] 4.1.0 Sync state switch tv front-end with reality: Executing step call service
21592020-10-30 11:22:48 INFO (SyncWorker_18) [homeassistant.components.python_script] Executing set_state.py: {'entity_id': 'switch.tv_toggle', 'state': 'on'}
21602020-10-30 11:22:48 INFO (SyncWorker_18) [homeassistant.components.python_script.set_state.py] switch.tv_toggle: state> on
21612020-10-30 11:22:49 INFO (MainThread) [custom_components.visonic.pyvisonic] [data receiver] *** Received validated message 0XAB ***
21622020-10-30 11:22:49 INFO (MainThread) [custom_components.visonic.pyvisonic] [handle_msgtypeAB] ***************************** Got PowerLink Keep-Alive ****************************
21632020-10-30 11:22:49 INFO (MainThread) [custom_components.visonic.pyvisonic] =============================================== Display Status ===============================================
21642020-10-30 11:22:49 INFO (MainThread) [custom_components.visonic.pyvisonic]      key 0  Sensor id=1  dname=Z01  stype=Magnet   zname=Front door     ztypeName=Delay 1    ztamper=0  ztrip=0  bypass=0  lowbatt=0  status=0  tamper=0  enrolled=1  triggered=0 
21652020-10-30 11:22:49 INFO (MainThread) [custom_components.visonic.pyvisonic]      key 1  Sensor id=2  dname=Z02  stype=Motion   zname=Hall           ztypeName=Delay 1    ztamper=0  ztrip=0  bypass=0  lowbatt=0  status=0  tamper=0  enrolled=1  triggered=0 
21662020-10-30 11:22:49 INFO (MainThread) [custom_components.visonic.pyvisonic]      key 2  Sensor id=3  dname=Z03  stype=Motion   zname=Dining room    ztypeName=Perimeter  ztamper=0  ztrip=0  bypass=0  lowbatt=0  status=0  tamper=0  enrolled=1  triggered=0 
21672020-10-30 11:22:49 INFO (MainThread) [custom_components.visonic.pyvisonic]      key 3  Sensor id=4  dname=Z04  stype=Motion   zname=Living room    ztypeName=Perimeter  ztamper=0  ztrip=0  bypass=0  lowbatt=0  status=0  tamper=0  enrolled=1  triggered=1 
21682020-10-30 11:22:49 INFO (MainThread) [custom_components.visonic.pyvisonic]    Model PowerMax Pro           PowerMaster No                     LastEvent None                   Ready   Yes          
21692020-10-30 11:22:49 INFO (MainThread) [custom_components.visonic.pyvisonic]    Mode  Powerlink              Status      Disarmed               Armed     No                     Trouble None              AlarmStatus None        
21702020-10-30 11:22:49 INFO (MainThread) [custom_components.visonic.pyvisonic] ==============================================================================================================
21712020-10-30 11:22:49 INFO (MainThread) [custom_components.visonic.pyvisonic] [data receiver] *** Received validated message 0XA5 ***
21722020-10-30 11:22:53 INFO (MainThread) [homeassistant.components.automation.4_1_0_sync_state_switch_tv_front_end_with_reality] 4.1.0 Sync state switch tv front-end with reality: Running automation actions
21732020-10-30 11:22:53 INFO (MainThread) [homeassistant.components.automation.4_1_0_sync_state_switch_tv_front_end_with_reality] 4.1.0 Sync state switch tv front-end with reality: Executing step call service
21742020-10-30 11:22:53 INFO (MainThread) [homeassistant.components.system_log.external] 4.1.0 The state of Ping 10.58.60.16 binary_sensor.ping_10_58_60_16 changed from on to on
21752020-10-30 11:22:53 INFO (MainThread) [homeassistant.components.automation.4_1_0_sync_state_switch_tv_front_end_with_reality] 4.1.0 Sync state switch tv front-end with reality: Executing step call service
21762020-10-30 11:22:53 INFO (SyncWorker_47) [homeassistant.components.python_script] Executing set_state.py: {'entity_id': 'switch.tv_toggle', 'state': 'on'}
21772020-10-30 11:22:53 INFO (SyncWorker_47) [homeassistant.components.python_script.set_state.py] switch.tv_toggle: state> on
21782020-10-30 11:22:59 INFO (MainThread) [homeassistant.components.automation.2_1_0_switch_sonos_on_after_tv_is_switched_off_overdag] 2.1.0 Switch Sonos On After TV is Switched Off Overdag.: Running automation actions
21792020-10-30 11:22:59 INFO (MainThread) [homeassistant.components.automation.2_1_0_switch_sonos_on_after_tv_is_switched_off_overdag] 2.1.0 Switch Sonos On After TV is Switched Off Overdag.: Executing step call service
21802020-10-30 11:22:59 INFO (MainThread) [homeassistant.components.automation.4_1_0_sync_state_switch_tv_front_end_with_reality] 4.1.0 Sync state switch tv front-end with reality: Running automation actions
21812020-10-30 11:22:59 INFO (MainThread) [homeassistant.components.automation.4_1_0_sync_state_switch_tv_front_end_with_reality] 4.1.0 Sync state switch tv front-end with reality: Executing step call service
21822020-10-30 11:22:59 INFO (MainThread) [homeassistant.components.automation.6_3_2_switch_input_boolean_tv_uit_als_niemand_in_woonkamer_back_to_default] 6.3.2 Switch Input_Boolean TV Uit ALs Niemand In woonkamer Back to Default: Running automation actions
21832020-10-30 11:22:59 INFO (MainThread) [homeassistant.components.automation.6_3_2_switch_input_boolean_tv_uit_als_niemand_in_woonkamer_back_to_default] 6.3.2 Switch Input_Boolean TV Uit ALs Niemand In woonkamer Back to Default: Executing step call service
21842020-10-30 11:22:59 INFO (MainThread) [homeassistant.components.system_log.external] 4.1.0 The state of Ping 10.58.60.16 binary_sensor.ping_10_58_60_16 changed from on to off
21852020-10-30 11:22:59 INFO (MainThread) [homeassistant.components.automation.4_1_0_sync_state_switch_tv_front_end_with_reality] 4.1.0 Sync state switch tv front-end with reality: Executing step call service
21862020-10-30 11:22:59 INFO (MainThread) [homeassistant.components.automation.6_3_2_switch_input_boolean_tv_uit_als_niemand_in_woonkamer_back_to_default] 6.3.2 Switch Input_Boolean TV Uit ALs Niemand In woonkamer Back to Default: Executing step call service
21872020-10-30 11:22:59 WARNING (MainThread) [homeassistant.components.system_log.external] The state of Ping 10.58.60.16 binary_sensor.ping_10_58_60_16 changed from on to off
21882020-10-30 11:22:59 INFO (SyncWorker_30) [homeassistant.components.python_script] Executing set_state.py: {'entity_id': 'switch.tv_toggle', 'state': 'off'}
21892020-10-30 11:22:59 INFO (SyncWorker_30) [homeassistant.components.python_script.set_state.py] switch.tv_toggle: state> off
21902020-10-30 11:22:59 INFO (MainThread) [homeassistant.components.automation.2_1_0_switch_sonos_on_after_tv_is_switched_off_overdag] 2.1.0 Switch Sonos On After TV is Switched Off Overdag.: Executing step call service
21912020-10-30 11:22:59 INFO (MainThread) [homeassistant.components.automation.2_1_0_switch_sonos_on_after_tv_is_switched_off_overdag] 2.1.0 Switch Sonos On After TV is Switched Off Overdag.: Executing step call service
21922020-10-30 11:22:59 WARNING (MainThread) [homeassistant.components.system_log.external] The state of Ping 10.58.60.16 binary_sensor.ping_10_58_60_16 changed from on to off
21932020-10-30 11:23:19 INFO (MainThread) [custom_components.visonic.pyvisonic] [data receiver] *** Received validated message 0XAB ***
21942020-10-30 11:23:19 INFO (MainThread) [custom_components.visonic.pyvisonic] [handle_msgtypeAB] ***************************** Got PowerLink Keep-Alive ****************************
21952020-10-30 11:23:19 INFO (MainThread) [custom_components.visonic.pyvisonic] =============================================== Display Status ===============================================
21962020-10-30 11:23:19 INFO (MainThread) [custom_components.visonic.pyvisonic]      key 0  Sensor id=1  dname=Z01  stype=Magnet   zname=Front door     ztypeName=Delay 1    ztamper=0  ztrip=0  bypass=0  lowbatt=0  status=0  tamper=0  enrolled=1  triggered=0 
21972020-10-30 11:23:19 INFO (MainThread) [custom_components.visonic.pyvisonic]      key 1  Sensor id=2  dname=Z02  stype=Motion   zname=Hall           ztypeName=Delay 1    ztamper=0  ztrip=0  bypass=0  lowbatt=0  status=0  tamper=0  enrolled=1  triggered=0 
21982020-10-30 11:23:19 INFO (MainThread) [custom_components.visonic.pyvisonic]      key 2  Sensor id=3  dname=Z03  stype=Motion   zname=Dining room    ztypeName=Perimeter  ztamper=0  ztrip=0  bypass=0  lowbatt=0  status=0  tamper=0  enrolled=1  triggered=1 
21992020-10-30 11:23:19 INFO (MainThread) [custom_components.visonic.pyvisonic]      key 3  Sensor id=4  dname=Z04  stype=Motion   zname=Living room    ztypeName=Perimeter  ztamper=0  ztrip=0  bypass=0  lowbatt=0  status=0  tamper=0  enrolled=1  triggered=1 
22002020-10-30 11:23:19 INFO (MainThread) [custom_components.visonic.pyvisonic]    Model PowerMax Pro           PowerMaster No                     LastEvent None                   Ready   Yes          
22012020-10-30 11:23:19 INFO (MainThread) [custom_components.visonic.pyvisonic]    Mode  Powerlink              Status      Disarmed               Armed     No                     Trouble None              AlarmStatus None        
22022020-10-30 11:23:19 INFO (MainThread) [custom_components.visonic.pyvisonic] ==============================================================================================================
22032020-10-30 11:23:49 INFO (MainThread) [custom_components.visonic.pyvisonic] [data receiver] *** Received validated message 0XAB ***
22042020-10-30 11:23:49 INFO (MainThread) [custom_components.visonic.pyvisonic] [handle_msgtypeAB] ***************************** Got PowerLink Keep-Alive ****************************
22052020-10-30 11:23:49 INFO (MainThread) [custom_components.visonic.pyvisonic] =============================================== Display Status ===============================================
22062020-10-30 11:23:49 INFO (MainThread) [custom_components.visonic.pyvisonic]      key 0  Sensor id=1  dname=Z01  stype=Magnet   zname=Front door     ztypeName=Delay 1    ztamper=0  ztrip=0  bypass=0  lowbatt=0  status=0  tamper=0  enrolled=1  triggered=0 
22072020-10-30 11:23:49 INFO (MainThread) [custom_components.visonic.pyvisonic]      key 1  Sensor id=2  dname=Z02  stype=Motion   zname=Hall           ztypeName=Delay 1    ztamper=0  ztrip=0  bypass=0  lowbatt=0  status=0  tamper=0  enrolled=1  triggered=0 
22082020-10-30 11:23:49 INFO (MainThread) [custom_components.visonic.pyvisonic]      key 2  Sensor id=3  dname=Z03  stype=Motion   zname=Dining room    ztypeName=Perimeter  ztamper=0  ztrip=0  bypass=0  lowbatt=0  status=0  tamper=0  enrolled=1  triggered=1 
22092020-10-30 11:23:49 INFO (MainThread) [custom_components.visonic.pyvisonic]      key 3  Sensor id=4  dname=Z04  stype=Motion   zname=Living room    ztypeName=Perimeter  ztamper=0  ztrip=0  bypass=0  lowbatt=0  status=0  tamper=0  enrolled=1  triggered=1 
22102020-10-30 11:23:49 INFO (MainThread) [custom_components.visonic.pyvisonic]    Model PowerMax Pro           PowerMaster No                     LastEvent None                   Ready   Yes          
22112020-10-30 11:23:49 INFO (MainThread) [custom_components.visonic.pyvisonic]    Mode  Powerlink              Status      Disarmed               Armed     No                     Trouble None              AlarmStatus None        
22122020-10-30 11:23:49 INFO (MainThread) [custom_components.visonic.pyvisonic] ==============================================================================================================
22132020-10-30 11:24:19 INFO (MainThread) [custom_components.visonic.pyvisonic] [data receiver] *** Received validated message 0XAB ***
22142020-10-30 11:24:19 INFO (MainThread) [custom_components.visonic.pyvisonic] [handle_msgtypeAB] ***************************** Got PowerLink Keep-Alive ****************************
22152020-10-30 11:24:19 INFO (MainThread) [custom_components.visonic.pyvisonic] =============================================== Display Status ===============================================
22162020-10-30 11:24:19 INFO (MainThread) [custom_components.visonic.pyvisonic]      key 0  Sensor id=1  dname=Z01  stype=Magnet   zname=Front door     ztypeName=Delay 1    ztamper=0  ztrip=0  bypass=0  lowbatt=0  status=0  tamper=0  enrolled=1  triggered=0 
22172020-10-30 11:24:19 INFO (MainThread) [custom_components.visonic.pyvisonic]      key 1  Sensor id=2  dname=Z02  stype=Motion   zname=Hall           ztypeName=Delay 1    ztamper=0  ztrip=0  bypass=0  lowbatt=0  status=0  tamper=0  enrolled=1  triggered=0 
22182020-10-30 11:24:19 INFO (MainThread) [custom_components.visonic.pyvisonic]      key 2  Sensor id=3  dname=Z03  stype=Motion   zname=Dining room    ztypeName=Perimeter  ztamper=0  ztrip=0  bypass=0  lowbatt=0  status=0  tamper=0  enrolled=1  triggered=1 
22192020-10-30 11:24:19 INFO (MainThread) [custom_components.visonic.pyvisonic]      key 3  Sensor id=4  dname=Z04  stype=Motion   zname=Living room    ztypeName=Perimeter  ztamper=0  ztrip=0  bypass=0  lowbatt=0  status=0  tamper=0  enrolled=1  triggered=1 
22202020-10-30 11:24:19 INFO (MainThread) [custom_components.visonic.pyvisonic]    Model PowerMax Pro           PowerMaster No                     LastEvent None                   Ready   Yes          
22212020-10-30 11:24:19 INFO (MainThread) [custom_components.visonic.pyvisonic]    Mode  Powerlink              Status      Disarmed               Armed     No                     Trouble None              AlarmStatus None        
22222020-10-30 11:24:19 INFO (MainThread) [custom_components.visonic.pyvisonic] ==============================================================================================================
22232020-10-30 11:24:49 INFO (MainThread) [custom_components.visonic.pyvisonic] [data receiver] *** Received validated message 0XAB ***
22242020-10-30 11:24:49 INFO (MainThread) [custom_components.visonic.pyvisonic] [handle_msgtypeAB] ***************************** Got PowerLink Keep-Alive ****************************
22252020-10-30 11:24:49 INFO (MainThread) [custom_components.visonic.pyvisonic] =============================================== Display Status ===============================================
22262020-10-30 11:24:49 INFO (MainThread) [custom_components.visonic.pyvisonic]      key 0  Sensor id=1  dname=Z01  stype=Magnet   zname=Front door     ztypeName=Delay 1    ztamper=0  ztrip=0  bypass=0  lowbatt=0  status=0  tamper=0  enrolled=1  triggered=0 
22272020-10-30 11:24:49 INFO (MainThread) [custom_components.visonic.pyvisonic]      key 1  Sensor id=2  dname=Z02  stype=Motion   zname=Hall           ztypeName=Delay 1    ztamper=0  ztrip=0  bypass=0  lowbatt=0  status=0  tamper=0  enrolled=1  triggered=0 
22282020-10-30 11:24:49 INFO (MainThread) [custom_components.visonic.pyvisonic]      key 2  Sensor id=3  dname=Z03  stype=Motion   zname=Dining room    ztypeName=Perimeter  ztamper=0  ztrip=0  bypass=0  lowbatt=0  status=0  tamper=0  enrolled=1  triggered=1 
22292020-10-30 11:24:49 INFO (MainThread) [custom_components.visonic.pyvisonic]      key 3  Sensor id=4  dname=Z04  stype=Motion   zname=Living room    ztypeName=Perimeter  ztamper=0  ztrip=0  bypass=0  lowbatt=0  status=0  tamper=0  enrolled=1  triggered=0 
22302020-10-30 11:24:49 INFO (MainThread) [custom_components.visonic.pyvisonic]    Model PowerMax Pro           PowerMaster No                     LastEvent None                   Ready   Yes          
22312020-10-30 11:24:49 INFO (MainThread) [custom_components.visonic.pyvisonic]    Mode  Powerlink              Status      Disarmed               Armed     No                     Trouble None              AlarmStatus None        
22322020-10-30 11:24:49 INFO (MainThread) [custom_components.visonic.pyvisonic] ==============================================================================================================
22332020-10-30 11:25:19 INFO (MainThread) [custom_components.visonic.pyvisonic] [data receiver] *** Received validated message 0XAB ***
22342020-10-30 11:25:19 INFO (MainThread) [custom_components.visonic.pyvisonic] [handle_msgtypeAB] ***************************** Got PowerLink Keep-Alive ****************************
22352020-10-30 11:25:19 INFO (MainThread) [custom_components.visonic.pyvisonic] =============================================== Display Status ===============================================
22362020-10-30 11:25:19 INFO (MainThread) [custom_components.visonic.pyvisonic]      key 0  Sensor id=1  dname=Z01  stype=Magnet   zname=Front door     ztypeName=Delay 1    ztamper=0  ztrip=0  bypass=0  lowbatt=0  status=0  tamper=0  enrolled=1  triggered=0 
22372020-10-30 11:25:19 INFO (MainThread) [custom_components.visonic.pyvisonic]      key 1  Sensor id=2  dname=Z02  stype=Motion   zname=Hall           ztypeName=Delay 1    ztamper=0  ztrip=0  bypass=0  lowbatt=0  status=0  tamper=0  enrolled=1  triggered=0 
22382020-10-30 11:25:19 INFO (MainThread) [custom_components.visonic.pyvisonic]      key 2  Sensor id=3  dname=Z03  stype=Motion   zname=Dining room    ztypeName=Perimeter  ztamper=0  ztrip=0  bypass=0  lowbatt=0  status=0  tamper=0  enrolled=1  triggered=0 
22392020-10-30 11:25:19 INFO (MainThread) [custom_components.visonic.pyvisonic]      key 3  Sensor id=4  dname=Z04  stype=Motion   zname=Living room    ztypeName=Perimeter  ztamper=0  ztrip=0  bypass=0  lowbatt=0  status=0  tamper=0  enrolled=1  triggered=0 
22402020-10-30 11:25:19 INFO (MainThread) [custom_components.visonic.pyvisonic]    Model PowerMax Pro           PowerMaster No                     LastEvent None                   Ready   Yes          
22412020-10-30 11:25:19 INFO (MainThread) [custom_components.visonic.pyvisonic]    Mode  Powerlink              Status      Disarmed               Armed     No                     Trouble None              AlarmStatus None        
22422020-10-30 11:25:19 INFO (MainThread) [custom_components.visonic.pyvisonic] ==============================================================================================================
22432020-10-30 11:25:49 INFO (MainThread) [custom_components.visonic.pyvisonic] [data receiver] *** Received validated message 0XAB ***
22442020-10-30 11:25:49 INFO (MainThread) [custom_components.visonic.pyvisonic] [handle_msgtypeAB] ***************************** Got PowerLink Keep-Alive ****************************
22452020-10-30 11:25:49 INFO (MainThread) [custom_components.visonic.pyvisonic] =============================================== Display Status ===============================================
22462020-10-30 11:25:49 INFO (MainThread) [custom_components.visonic.pyvisonic]      key 0  Sensor id=1  dname=Z01  stype=Magnet   zname=Front door     ztypeName=Delay 1    ztamper=0  ztrip=0  bypass=0  lowbatt=0  status=0  tamper=0  enrolled=1  triggered=0 
22472020-10-30 11:25:49 INFO (MainThread) [custom_components.visonic.pyvisonic]      key 1  Sensor id=2  dname=Z02  stype=Motion   zname=Hall           ztypeName=Delay 1    ztamper=0  ztrip=0  bypass=0  lowbatt=0  status=0  tamper=0  enrolled=1  triggered=0 
22482020-10-30 11:25:49 INFO (MainThread) [custom_components.visonic.pyvisonic]      key 2  Sensor id=3  dname=Z03  stype=Motion   zname=Dining room    ztypeName=Perimeter  ztamper=0  ztrip=0  bypass=0  lowbatt=0  status=0  tamper=0  enrolled=1  triggered=0 
22492020-10-30 11:25:49 INFO (MainThread) [custom_components.visonic.pyvisonic]      key 3  Sensor id=4  dname=Z04  stype=Motion   zname=Living room    ztypeName=Perimeter  ztamper=0  ztrip=0  bypass=0  lowbatt=0  status=0  tamper=0  enrolled=1  triggered=0 
22502020-10-30 11:25:49 INFO (MainThread) [custom_components.visonic.pyvisonic]    Model PowerMax Pro           PowerMaster No                     LastEvent None                   Ready   Yes          
22512020-10-30 11:25:49 INFO (MainThread) [custom_components.visonic.pyvisonic]    Mode  Powerlink              Status      Disarmed               Armed     No                     Trouble None              AlarmStatus None        
22522020-10-30 11:25:49 INFO (MainThread) [custom_components.visonic.pyvisonic] ==============================================================================================================
22532020-10-30 11:26:19 INFO (MainThread) [custom_components.visonic.pyvisonic] [data receiver] *** Received validated message 0XAB ***
22542020-10-30 11:26:19 INFO (MainThread) [custom_components.visonic.pyvisonic] [handle_msgtypeAB] ***************************** Got PowerLink Keep-Alive ****************************
22552020-10-30 11:26:19 INFO (MainThread) [custom_components.visonic.pyvisonic] =============================================== Display Status ===============================================
22562020-10-30 11:26:19 INFO (MainThread) [custom_components.visonic.pyvisonic]      key 0  Sensor id=1  dname=Z01  stype=Magnet   zname=Front door     ztypeName=Delay 1    ztamper=0  ztrip=0  bypass=0  lowbatt=0  status=0  tamper=0  enrolled=1  triggered=0 
22572020-10-30 11:26:19 INFO (MainThread) [custom_components.visonic.pyvisonic]      key 1  Sensor id=2  dname=Z02  stype=Motion   zname=Hall           ztypeName=Delay 1    ztamper=0  ztrip=0  bypass=0  lowbatt=0  status=0  tamper=0  enrolled=1  triggered=0 
22582020-10-30 11:26:19 INFO (MainThread) [custom_components.visonic.pyvisonic]      key 2  Sensor id=3  dname=Z03  stype=Motion   zname=Dining room    ztypeName=Perimeter  ztamper=0  ztrip=0  bypass=0  lowbatt=0  status=0  tamper=0  enrolled=1  triggered=0 
22592020-10-30 11:26:19 INFO (MainThread) [custom_components.visonic.pyvisonic]      key 3  Sensor id=4  dname=Z04  stype=Motion   zname=Living room    ztypeName=Perimeter  ztamper=0  ztrip=0  bypass=0  lowbatt=0  status=0  tamper=0  enrolled=1  triggered=0 
22602020-10-30 11:26:19 INFO (MainThread) [custom_components.visonic.pyvisonic]    Model PowerMax Pro           PowerMaster No                     LastEvent None                   Ready   Yes          
22612020-10-30 11:26:19 INFO (MainThread) [custom_components.visonic.pyvisonic]    Mode  Powerlink              Status      Disarmed               Armed     No                     Trouble None              AlarmStatus None        
22622020-10-30 11:26:19 INFO (MainThread) [custom_components.visonic.pyvisonic] ==============================================================================================================
22632020-10-30 11:26:49 INFO (MainThread) [custom_components.visonic.pyvisonic] [data receiver] *** Received validated message 0XAB ***
22642020-10-30 11:26:49 INFO (MainThread) [custom_components.visonic.pyvisonic] [handle_msgtypeAB] ***************************** Got PowerLink Keep-Alive ****************************
22652020-10-30 11:26:49 INFO (MainThread) [custom_components.visonic.pyvisonic] =============================================== Display Status ===============================================
22662020-10-30 11:26:49 INFO (MainThread) [custom_components.visonic.pyvisonic]      key 0  Sensor id=1  dname=Z01  stype=Magnet   zname=Front door     ztypeName=Delay 1    ztamper=0  ztrip=0  bypass=0  lowbatt=0  status=0  tamper=0  enrolled=1  triggered=0 
22672020-10-30 11:26:49 INFO (MainThread) [custom_components.visonic.pyvisonic]      key 1  Sensor id=2  dname=Z02  stype=Motion   zname=Hall           ztypeName=Delay 1    ztamper=0  ztrip=0  bypass=0  lowbatt=0  status=0  tamper=0  enrolled=1  triggered=0 
22682020-10-30 11:26:49 INFO (MainThread) [custom_components.visonic.pyvisonic]      key 2  Sensor id=3  dname=Z03  stype=Motion   zname=Dining room    ztypeName=Perimeter  ztamper=0  ztrip=0  bypass=0  lowbatt=0  status=0  tamper=0  enrolled=1  triggered=0 
22692020-10-30 11:26:49 INFO (MainThread) [custom_components.visonic.pyvisonic]      key 3  Sensor id=4  dname=Z04  stype=Motion   zname=Living room    ztypeName=Perimeter  ztamper=0  ztrip=0  bypass=0  lowbatt=0  status=0  tamper=0  enrolled=1  triggered=0 
22702020-10-30 11:26:49 INFO (MainThread) [custom_components.visonic.pyvisonic]    Model PowerMax Pro           PowerMaster No                     LastEvent None                   Ready   Yes          
22712020-10-30 11:26:49 INFO (MainThread) [custom_components.visonic.pyvisonic]    Mode  Powerlink              Status      Disarmed               Armed     No                     Trouble None              AlarmStatus None        
22722020-10-30 11:26:49 INFO (MainThread) [custom_components.visonic.pyvisonic] ==============================================================================================================
22732020-10-30 11:27:19 INFO (MainThread) [custom_components.visonic.pyvisonic] [data receiver] *** Received validated message 0XAB ***
22742020-10-30 11:27:19 INFO (MainThread) [custom_components.visonic.pyvisonic] [handle_msgtypeAB] ***************************** Got PowerLink Keep-Alive ****************************
22752020-10-30 11:27:19 INFO (MainThread) [custom_components.visonic.pyvisonic] =============================================== Display Status ===============================================
22762020-10-30 11:27:19 INFO (MainThread) [custom_components.visonic.pyvisonic]      key 0  Sensor id=1  dname=Z01  stype=Magnet   zname=Front door     ztypeName=Delay 1    ztamper=0  ztrip=0  bypass=0  lowbatt=0  status=0  tamper=0  enrolled=1  triggered=0 
22772020-10-30 11:27:19 INFO (MainThread) [custom_components.visonic.pyvisonic]      key 1  Sensor id=2  dname=Z02  stype=Motion   zname=Hall           ztypeName=Delay 1    ztamper=0  ztrip=0  bypass=0  lowbatt=0  status=0  tamper=0  enrolled=1  triggered=0 
22782020-10-30 11:27:19 INFO (MainThread) [custom_components.visonic.pyvisonic]      key 2  Sensor id=3  dname=Z03  stype=Motion   zname=Dining room    ztypeName=Perimeter  ztamper=0  ztrip=0  bypass=0  lowbatt=0  status=0  tamper=0  enrolled=1  triggered=0 
22792020-10-30 11:27:19 INFO (MainThread) [custom_components.visonic.pyvisonic]      key 3  Sensor id=4  dname=Z04  stype=Motion   zname=Living room    ztypeName=Perimeter  ztamper=0  ztrip=0  bypass=0  lowbatt=0  status=0  tamper=0  enrolled=1  triggered=0 
22802020-10-30 11:27:19 INFO (MainThread) [custom_components.visonic.pyvisonic]    Model PowerMax Pro           PowerMaster No                     LastEvent None                   Ready   Yes          
22812020-10-30 11:27:19 INFO (MainThread) [custom_components.visonic.pyvisonic]    Mode  Powerlink              Status      Disarmed               Armed     No                     Trouble None              AlarmStatus None        
22822020-10-30 11:27:19 INFO (MainThread) [custom_components.visonic.pyvisonic] ==============================================================================================================
22832020-10-30 11:27:49 INFO (MainThread) [custom_components.visonic.pyvisonic] [data receiver] *** Received validated message 0XAB ***
22842020-10-30 11:27:49 INFO (MainThread) [custom_components.visonic.pyvisonic] [handle_msgtypeAB] ***************************** Got PowerLink Keep-Alive ****************************
22852020-10-30 11:27:49 INFO (MainThread) [custom_components.visonic.pyvisonic] =============================================== Display Status ===============================================
22862020-10-30 11:27:49 INFO (MainThread) [custom_components.visonic.pyvisonic]      key 0  Sensor id=1  dname=Z01  stype=Magnet   zname=Front door     ztypeName=Delay 1    ztamper=0  ztrip=0  bypass=0  lowbatt=0  status=0  tamper=0  enrolled=1  triggered=0 
22872020-10-30 11:27:49 INFO (MainThread) [custom_components.visonic.pyvisonic]      key 1  Sensor id=2  dname=Z02  stype=Motion   zname=Hall           ztypeName=Delay 1    ztamper=0  ztrip=0  bypass=0  lowbatt=0  status=0  tamper=0  enrolled=1  triggered=0 
22882020-10-30 11:27:49 INFO (MainThread) [custom_components.visonic.pyvisonic]      key 2  Sensor id=3  dname=Z03  stype=Motion   zname=Dining room    ztypeName=Perimeter  ztamper=0  ztrip=0  bypass=0  lowbatt=0  status=0  tamper=0  enrolled=1  triggered=0 
22892020-10-30 11:27:49 INFO (MainThread) [custom_components.visonic.pyvisonic]      key 3  Sensor id=4  dname=Z04  stype=Motion   zname=Living room    ztypeName=Perimeter  ztamper=0  ztrip=0  bypass=0  lowbatt=0  status=0  tamper=0  enrolled=1  triggered=0 
22902020-10-30 11:27:49 INFO (MainThread) [custom_components.visonic.pyvisonic]    Model PowerMax Pro           PowerMaster No                     LastEvent None                   Ready   Yes          
22912020-10-30 11:27:49 INFO (MainThread) [custom_components.visonic.pyvisonic]    Mode  Powerlink              Status      Disarmed               Armed     No                     Trouble None              AlarmStatus None        
22922020-10-30 11:27:49 INFO (MainThread) [custom_components.visonic.pyvisonic] ==============================================================================================================
22932020-10-30 11:28:19 INFO (MainThread) [custom_components.visonic.pyvisonic] [data receiver] *** Received validated message 0XAB ***
22942020-10-30 11:28:19 INFO (MainThread) [custom_components.visonic.pyvisonic] [handle_msgtypeAB] ***************************** Got PowerLink Keep-Alive ****************************
22952020-10-30 11:28:19 INFO (MainThread) [custom_components.visonic.pyvisonic] =============================================== Display Status ===============================================
22962020-10-30 11:28:19 INFO (MainThread) [custom_components.visonic.pyvisonic]      key 0  Sensor id=1  dname=Z01  stype=Magnet   zname=Front door     ztypeName=Delay 1    ztamper=0  ztrip=0  bypass=0  lowbatt=0  status=0  tamper=0  enrolled=1  triggered=0 
22972020-10-30 11:28:19 INFO (MainThread) [custom_components.visonic.pyvisonic]      key 1  Sensor id=2  dname=Z02  stype=Motion   zname=Hall           ztypeName=Delay 1    ztamper=0  ztrip=0  bypass=0  lowbatt=0  status=0  tamper=0  enrolled=1  triggered=0 
22982020-10-30 11:28:19 INFO (MainThread) [custom_components.visonic.pyvisonic]      key 2  Sensor id=3  dname=Z03  stype=Motion   zname=Dining room    ztypeName=Perimeter  ztamper=0  ztrip=0  bypass=0  lowbatt=0  status=0  tamper=0  enrolled=1  triggered=0 
22992020-10-30 11:28:19 INFO (MainThread) [custom_components.visonic.pyvisonic]      key 3  Sensor id=4  dname=Z04  stype=Motion   zname=Living room    ztypeName=Perimeter  ztamper=0  ztrip=0  bypass=0  lowbatt=0  status=0  tamper=0  enrolled=1  triggered=0 
23002020-10-30 11:28:19 INFO (MainThread) [custom_components.visonic.pyvisonic]    Model PowerMax Pro           PowerMaster No                     LastEvent None                   Ready   Yes          
23012020-10-30 11:28:19 INFO (MainThread) [custom_components.visonic.pyvisonic]    Mode  Powerlink              Status      Disarmed               Armed     No                     Trouble None              AlarmStatus None        
23022020-10-30 11:28:19 INFO (MainThread) [custom_components.visonic.pyvisonic] ==============================================================================================================
23032020-10-30 11:28:49 INFO (MainThread) [custom_components.visonic.pyvisonic] [data receiver] *** Received validated message 0XAB ***
23042020-10-30 11:28:49 INFO (MainThread) [custom_components.visonic.pyvisonic] [handle_msgtypeAB] ***************************** Got PowerLink Keep-Alive ****************************
23052020-10-30 11:28:49 INFO (MainThread) [custom_components.visonic.pyvisonic] =============================================== Display Status ===============================================
23062020-10-30 11:28:49 INFO (MainThread) [custom_components.visonic.pyvisonic]      key 0  Sensor id=1  dname=Z01  stype=Magnet   zname=Front door     ztypeName=Delay 1    ztamper=0  ztrip=0  bypass=0  lowbatt=0  status=0  tamper=0  enrolled=1  triggered=0 
23072020-10-30 11:28:49 INFO (MainThread) [custom_components.visonic.pyvisonic]      key 1  Sensor id=2  dname=Z02  stype=Motion   zname=Hall           ztypeName=Delay 1    ztamper=0  ztrip=0  bypass=0  lowbatt=0  status=0  tamper=0  enrolled=1  triggered=0 
23082020-10-30 11:28:49 INFO (MainThread) [custom_components.visonic.pyvisonic]      key 2  Sensor id=3  dname=Z03  stype=Motion   zname=Dining room    ztypeName=Perimeter  ztamper=0  ztrip=0  bypass=0  lowbatt=0  status=0  tamper=0  enrolled=1  triggered=0 
23092020-10-30 11:28:49 INFO (MainThread) [custom_components.visonic.pyvisonic]      key 3  Sensor id=4  dname=Z04  stype=Motion   zname=Living room    ztypeName=Perimeter  ztamper=0  ztrip=0  bypass=0  lowbatt=0  status=0  tamper=0  enrolled=1  triggered=0 
23102020-10-30 11:28:49 INFO (MainThread) [custom_components.visonic.pyvisonic]    Model PowerMax Pro           PowerMaster No                     LastEvent None                   Ready   Yes          
23112020-10-30 11:28:49 INFO (MainThread) [custom_components.visonic.pyvisonic]    Mode  Powerlink              Status      Disarmed               Armed     No                     Trouble None              AlarmStatus None        
23122020-10-30 11:28:49 INFO (MainThread) [custom_components.visonic.pyvisonic] ==============================================================================================================
23132020-10-30 11:29:19 INFO (MainThread) [custom_components.visonic.pyvisonic] [data receiver] *** Received validated message 0XAB ***
23142020-10-30 11:29:19 INFO (MainThread) [custom_components.visonic.pyvisonic] [handle_msgtypeAB] ***************************** Got PowerLink Keep-Alive ****************************
23152020-10-30 11:29:19 INFO (MainThread) [custom_components.visonic.pyvisonic] =============================================== Display Status ===============================================
23162020-10-30 11:29:19 INFO (MainThread) [custom_components.visonic.pyvisonic]      key 0  Sensor id=1  dname=Z01  stype=Magnet   zname=Front door     ztypeName=Delay 1    ztamper=0  ztrip=0  bypass=0  lowbatt=0  status=0  tamper=0  enrolled=1  triggered=0 
23172020-10-30 11:29:19 INFO (MainThread) [custom_components.visonic.pyvisonic]      key 1  Sensor id=2  dname=Z02  stype=Motion   zname=Hall           ztypeName=Delay 1    ztamper=0  ztrip=0  bypass=0  lowbatt=0  status=0  tamper=0  enrolled=1  triggered=0 
23182020-10-30 11:29:19 INFO (MainThread) [custom_components.visonic.pyvisonic]      key 2  Sensor id=3  dname=Z03  stype=Motion   zname=Dining room    ztypeName=Perimeter  ztamper=0  ztrip=0  bypass=0  lowbatt=0  status=0  tamper=0  enrolled=1  triggered=0 
23192020-10-30 11:29:19 INFO (MainThread) [custom_components.visonic.pyvisonic]      key 3  Sensor id=4  dname=Z04  stype=Motion   zname=Living room    ztypeName=Perimeter  ztamper=0  ztrip=0  bypass=0  lowbatt=0  status=0  tamper=0  enrolled=1  triggered=0 
23202020-10-30 11:29:19 INFO (MainThread) [custom_components.visonic.pyvisonic]    Model PowerMax Pro           PowerMaster No                     LastEvent None                   Ready   Yes          
23212020-10-30 11:29:19 INFO (MainThread) [custom_components.visonic.pyvisonic]    Mode  Powerlink              Status      Disarmed               Armed     No                     Trouble None              AlarmStatus None        
23222020-10-30 11:29:19 INFO (MainThread) [custom_components.visonic.pyvisonic] ==============================================================================================================
23232020-10-30 11:29:49 INFO (MainThread) [custom_components.visonic.pyvisonic] [data receiver] *** Received validated message 0XAB ***
23242020-10-30 11:29:49 INFO (MainThread) [custom_components.visonic.pyvisonic] [handle_msgtypeAB] ***************************** Got PowerLink Keep-Alive ****************************
23252020-10-30 11:29:49 INFO (MainThread) [custom_components.visonic.pyvisonic] =============================================== Display Status ===============================================
23262020-10-30 11:29:49 INFO (MainThread) [custom_components.visonic.pyvisonic]      key 0  Sensor id=1  dname=Z01  stype=Magnet   zname=Front door     ztypeName=Delay 1    ztamper=0  ztrip=0  bypass=0  lowbatt=0  status=0  tamper=0  enrolled=1  triggered=0 
23272020-10-30 11:29:49 INFO (MainThread) [custom_components.visonic.pyvisonic]      key 1  Sensor id=2  dname=Z02  stype=Motion   zname=Hall           ztypeName=Delay 1    ztamper=0  ztrip=0  bypass=0  lowbatt=0  status=0  tamper=0  enrolled=1  triggered=0 
23282020-10-30 11:29:49 INFO (MainThread) [custom_components.visonic.pyvisonic]      key 2  Sensor id=3  dname=Z03  stype=Motion   zname=Dining room    ztypeName=Perimeter  ztamper=0  ztrip=0  bypass=0  lowbatt=0  status=0  tamper=0  enrolled=1  triggered=0 
23292020-10-30 11:29:49 INFO (MainThread) [custom_components.visonic.pyvisonic]      key 3  Sensor id=4  dname=Z04  stype=Motion   zname=Living room    ztypeName=Perimeter  ztamper=0  ztrip=0  bypass=0  lowbatt=0  status=0  tamper=0  enrolled=1  triggered=0 
23302020-10-30 11:29:49 INFO (MainThread) [custom_components.visonic.pyvisonic]    Model PowerMax Pro           PowerMaster No                     LastEvent None                   Ready   Yes          
23312020-10-30 11:29:49 INFO (MainThread) [custom_components.visonic.pyvisonic]    Mode  Powerlink              Status      Disarmed               Armed     No                     Trouble None              AlarmStatus None        
23322020-10-30 11:29:49 INFO (MainThread) [custom_components.visonic.pyvisonic] ==============================================================================================================
23332020-10-30 11:30:19 INFO (MainThread) [custom_components.visonic.pyvisonic] [data receiver] *** Received validated message 0XAB ***
23342020-10-30 11:30:19 INFO (MainThread) [custom_components.visonic.pyvisonic] [handle_msgtypeAB] ***************************** Got PowerLink Keep-Alive ****************************
23352020-10-30 11:30:19 INFO (MainThread) [custom_components.visonic.pyvisonic] =============================================== Display Status ===============================================
23362020-10-30 11:30:19 INFO (MainThread) [custom_components.visonic.pyvisonic]      key 0  Sensor id=1  dname=Z01  stype=Magnet   zname=Front door     ztypeName=Delay 1    ztamper=0  ztrip=0  bypass=0  lowbatt=0  status=0  tamper=0  enrolled=1  triggered=0 
23372020-10-30 11:30:19 INFO (MainThread) [custom_components.visonic.pyvisonic]      key 1  Sensor id=2  dname=Z02  stype=Motion   zname=Hall           ztypeName=Delay 1    ztamper=0  ztrip=0  bypass=0  lowbatt=0  status=0  tamper=0  enrolled=1  triggered=0 
23382020-10-30 11:30:19 INFO (MainThread) [custom_components.visonic.pyvisonic]      key 2  Sensor id=3  dname=Z03  stype=Motion   zname=Dining room    ztypeName=Perimeter  ztamper=0  ztrip=0  bypass=0  lowbatt=0  status=0  tamper=0  enrolled=1  triggered=0 
23392020-10-30 11:30:19 INFO (MainThread) [custom_components.visonic.pyvisonic]      key 3  Sensor id=4  dname=Z04  stype=Motion   zname=Living room    ztypeName=Perimeter  ztamper=0  ztrip=0  bypass=0  lowbatt=0  status=0  tamper=0  enrolled=1  triggered=0 
23402020-10-30 11:30:19 INFO (MainThread) [custom_components.visonic.pyvisonic]    Model PowerMax Pro           PowerMaster No                     LastEvent None                   Ready   Yes          
23412020-10-30 11:30:19 INFO (MainThread) [custom_components.visonic.pyvisonic]    Mode  Powerlink              Status      Disarmed               Armed     No                     Trouble None              AlarmStatus None        
23422020-10-30 11:30:19 INFO (MainThread) [custom_components.visonic.pyvisonic] ==============================================================================================================
23432020-10-30 11:30:49 INFO (MainThread) [custom_components.visonic.pyvisonic] [data receiver] *** Received validated message 0XAB ***
23442020-10-30 11:30:49 INFO (MainThread) [custom_components.visonic.pyvisonic] [handle_msgtypeAB] ***************************** Got PowerLink Keep-Alive ****************************
23452020-10-30 11:30:49 INFO (MainThread) [custom_components.visonic.pyvisonic] =============================================== Display Status ===============================================
23462020-10-30 11:30:49 INFO (MainThread) [custom_components.visonic.pyvisonic]      key 0  Sensor id=1  dname=Z01  stype=Magnet   zname=Front door     ztypeName=Delay 1    ztamper=0  ztrip=0  bypass=0  lowbatt=0  status=0  tamper=0  enrolled=1  triggered=0 
23472020-10-30 11:30:49 INFO (MainThread) [custom_components.visonic.pyvisonic]      key 1  Sensor id=2  dname=Z02  stype=Motion   zname=Hall           ztypeName=Delay 1    ztamper=0  ztrip=0  bypass=0  lowbatt=0  status=0  tamper=0  enrolled=1  triggered=0 
23482020-10-30 11:30:49 INFO (MainThread) [custom_components.visonic.pyvisonic]      key 2  Sensor id=3  dname=Z03  stype=Motion   zname=Dining room    ztypeName=Perimeter  ztamper=0  ztrip=0  bypass=0  lowbatt=0  status=0  tamper=0  enrolled=1  triggered=0 
23492020-10-30 11:30:49 INFO (MainThread) [custom_components.visonic.pyvisonic]      key 3  Sensor id=4  dname=Z04  stype=Motion   zname=Living room    ztypeName=Perimeter  ztamper=0  ztrip=0  bypass=0  lowbatt=0  status=0  tamper=0  enrolled=1  triggered=0 
23502020-10-30 11:30:49 INFO (MainThread) [custom_components.visonic.pyvisonic]    Model PowerMax Pro           PowerMaster No                     LastEvent None                   Ready   Yes          
23512020-10-30 11:30:49 INFO (MainThread) [custom_components.visonic.pyvisonic]    Mode  Powerlink              Status      Disarmed               Armed     No                     Trouble None              AlarmStatus None        
23522020-10-30 11:30:49 INFO (MainThread) [custom_components.visonic.pyvisonic] ==============================================================================================================
23532020-10-30 11:31:05 INFO (MainThread) [custom_components.visonic.pyvisonic] [data receiver] *** Received validated message 0XA5 ***
23542020-10-30 11:31:19 INFO (MainThread) [custom_components.visonic.pyvisonic] [data receiver] *** Received validated message 0XAB ***
23552020-10-30 11:31:19 INFO (MainThread) [custom_components.visonic.pyvisonic] [handle_msgtypeAB] ***************************** Got PowerLink Keep-Alive ****************************
23562020-10-30 11:31:19 INFO (MainThread) [custom_components.visonic.pyvisonic] =============================================== Display Status ===============================================
23572020-10-30 11:31:19 INFO (MainThread) [custom_components.visonic.pyvisonic]      key 0  Sensor id=1  dname=Z01  stype=Magnet   zname=Front door     ztypeName=Delay 1    ztamper=0  ztrip=0  bypass=0  lowbatt=0  status=0  tamper=0  enrolled=1  triggered=0 
23582020-10-30 11:31:19 INFO (MainThread) [custom_components.visonic.pyvisonic]      key 1  Sensor id=2  dname=Z02  stype=Motion   zname=Hall           ztypeName=Delay 1    ztamper=0  ztrip=0  bypass=0  lowbatt=0  status=0  tamper=0  enrolled=1  triggered=0 
23592020-10-30 11:31:19 INFO (MainThread) [custom_components.visonic.pyvisonic]      key 2  Sensor id=3  dname=Z03  stype=Motion   zname=Dining room    ztypeName=Perimeter  ztamper=0  ztrip=0  bypass=0  lowbatt=0  status=0  tamper=0  enrolled=1  triggered=0 
23602020-10-30 11:31:19 INFO (MainThread) [custom_components.visonic.pyvisonic]      key 3  Sensor id=4  dname=Z04  stype=Motion   zname=Living room    ztypeName=Perimeter  ztamper=0  ztrip=0  bypass=0  lowbatt=0  status=0  tamper=0  enrolled=1  triggered=0 
23612020-10-30 11:31:19 INFO (MainThread) [custom_components.visonic.pyvisonic]    Model PowerMax Pro           PowerMaster No                     LastEvent None                   Ready   Yes          
23622020-10-30 11:31:19 INFO (MainThread) [custom_components.visonic.pyvisonic]    Mode  Powerlink              Status      Disarmed               Armed     No                     Trouble None              AlarmStatus None        
23632020-10-30 11:31:19 INFO (MainThread) [custom_components.visonic.pyvisonic] ==============================================================================================================
23642020-10-30 11:31:49 INFO (MainThread) [custom_components.visonic.pyvisonic] [data receiver] *** Received validated message 0XAB ***
23652020-10-30 11:31:49 INFO (MainThread) [custom_components.visonic.pyvisonic] [handle_msgtypeAB] ***************************** Got PowerLink Keep-Alive ****************************
23662020-10-30 11:31:49 INFO (MainThread) [custom_components.visonic.pyvisonic] =============================================== Display Status ===============================================
23672020-10-30 11:31:49 INFO (MainThread) [custom_components.visonic.pyvisonic]      key 0  Sensor id=1  dname=Z01  stype=Magnet   zname=Front door     ztypeName=Delay 1    ztamper=0  ztrip=0  bypass=0  lowbatt=0  status=0  tamper=0  enrolled=1  triggered=0 
23682020-10-30 11:31:49 INFO (MainThread) [custom_components.visonic.pyvisonic]      key 1  Sensor id=2  dname=Z02  stype=Motion   zname=Hall           ztypeName=Delay 1    ztamper=0  ztrip=0  bypass=0  lowbatt=0  status=0  tamper=0  enrolled=1  triggered=0 
23692020-10-30 11:31:49 INFO (MainThread) [custom_components.visonic.pyvisonic]      key 2  Sensor id=3  dname=Z03  stype=Motion   zname=Dining room    ztypeName=Perimeter  ztamper=0  ztrip=0  bypass=0  lowbatt=0  status=0  tamper=0  enrolled=1  triggered=0 
23702020-10-30 11:31:49 INFO (MainThread) [custom_components.visonic.pyvisonic]      key 3  Sensor id=4  dname=Z04  stype=Motion   zname=Living room    ztypeName=Perimeter  ztamper=0  ztrip=0  bypass=0  lowbatt=0  status=0  tamper=0  enrolled=1  triggered=0 
23712020-10-30 11:31:49 INFO (MainThread) [custom_components.visonic.pyvisonic]    Model PowerMax Pro           PowerMaster No                     LastEvent None                   Ready   Yes          
23722020-10-30 11:31:49 INFO (MainThread) [custom_components.visonic.pyvisonic]    Mode  Powerlink              Status      Disarmed               Armed     No                     Trouble None              AlarmStatus None        
23732020-10-30 11:31:49 INFO (MainThread) [custom_components.visonic.pyvisonic] ==============================================================================================================
23742020-10-30 11:32:19 INFO (MainThread) [custom_components.visonic.pyvisonic] [data receiver] *** Received validated message 0XAB ***
23752020-10-30 11:32:19 INFO (MainThread) [custom_components.visonic.pyvisonic] [handle_msgtypeAB] ***************************** Got PowerLink Keep-Alive ****************************
23762020-10-30 11:32:19 INFO (MainThread) [custom_components.visonic.pyvisonic] =============================================== Display Status ===============================================
23772020-10-30 11:32:19 INFO (MainThread) [custom_components.visonic.pyvisonic]      key 0  Sensor id=1  dname=Z01  stype=Magnet   zname=Front door     ztypeName=Delay 1    ztamper=0  ztrip=0  bypass=0  lowbatt=0  status=0  tamper=0  enrolled=1  triggered=0 
23782020-10-30 11:32:19 INFO (MainThread) [custom_components.visonic.pyvisonic]      key 1  Sensor id=2  dname=Z02  stype=Motion   zname=Hall           ztypeName=Delay 1    ztamper=0  ztrip=0  bypass=0  lowbatt=0  status=0  tamper=0  enrolled=1  triggered=0 
23792020-10-30 11:32:19 INFO (MainThread) [custom_components.visonic.pyvisonic]      key 2  Sensor id=3  dname=Z03  stype=Motion   zname=Dining room    ztypeName=Perimeter  ztamper=0  ztrip=0  bypass=0  lowbatt=0  status=0  tamper=0  enrolled=1  triggered=0 
23802020-10-30 11:32:19 INFO (MainThread) [custom_components.visonic.pyvisonic]      key 3  Sensor id=4  dname=Z04  stype=Motion   zname=Living room    ztypeName=Perimeter  ztamper=0  ztrip=0  bypass=0  lowbatt=0  status=0  tamper=0  enrolled=1  triggered=0 
23812020-10-30 11:32:19 INFO (MainThread) [custom_components.visonic.pyvisonic]    Model PowerMax Pro           PowerMaster No                     LastEvent None                   Ready   Yes          
23822020-10-30 11:32:19 INFO (MainThread) [custom_components.visonic.pyvisonic]    Mode  Powerlink              Status      Disarmed               Armed     No                     Trouble None              AlarmStatus None        
23832020-10-30 11:32:19 INFO (MainThread) [custom_components.visonic.pyvisonic] ==============================================================================================================
23842020-10-30 11:32:49 INFO (MainThread) [custom_components.visonic.pyvisonic] [data receiver] *** Received validated message 0XAB ***
23852020-10-30 11:32:49 INFO (MainThread) [custom_components.visonic.pyvisonic] [handle_msgtypeAB] ***************************** Got PowerLink Keep-Alive ****************************
23862020-10-30 11:32:49 INFO (MainThread) [custom_components.visonic.pyvisonic] =============================================== Display Status ===============================================
23872020-10-30 11:32:49 INFO (MainThread) [custom_components.visonic.pyvisonic]      key 0  Sensor id=1  dname=Z01  stype=Magnet   zname=Front door     ztypeName=Delay 1    ztamper=0  ztrip=0  bypass=0  lowbatt=0  status=0  tamper=0  enrolled=1  triggered=0 
23882020-10-30 11:32:49 INFO (MainThread) [custom_components.visonic.pyvisonic]      key 1  Sensor id=2  dname=Z02  stype=Motion   zname=Hall           ztypeName=Delay 1    ztamper=0  ztrip=0  bypass=0  lowbatt=0  status=0  tamper=0  enrolled=1  triggered=0 
23892020-10-30 11:32:49 INFO (MainThread) [custom_components.visonic.pyvisonic]      key 2  Sensor id=3  dname=Z03  stype=Motion   zname=Dining room    ztypeName=Perimeter  ztamper=0  ztrip=0  bypass=0  lowbatt=0  status=0  tamper=0  enrolled=1  triggered=0 
23902020-10-30 11:32:49 INFO (MainThread) [custom_components.visonic.pyvisonic]      key 3  Sensor id=4  dname=Z04  stype=Motion   zname=Living room    ztypeName=Perimeter  ztamper=0  ztrip=0  bypass=0  lowbatt=0  status=0  tamper=0  enrolled=1  triggered=0 
23912020-10-30 11:32:49 INFO (MainThread) [custom_components.visonic.pyvisonic]    Model PowerMax Pro           PowerMaster No                     LastEvent None                   Ready   Yes          
23922020-10-30 11:32:49 INFO (MainThread) [custom_components.visonic.pyvisonic]    Mode  Powerlink              Status      Disarmed               Armed     No                     Trouble None              AlarmStatus None        
23932020-10-30 11:32:49 INFO (MainThread) [custom_components.visonic.pyvisonic] ==============================================================================================================
23942020-10-30 11:33:19 INFO (MainThread) [custom_components.visonic.pyvisonic] [data receiver] *** Received validated message 0XAB ***
23952020-10-30 11:33:19 INFO (MainThread) [custom_components.visonic.pyvisonic] [handle_msgtypeAB] ***************************** Got PowerLink Keep-Alive ****************************
23962020-10-30 11:33:19 INFO (MainThread) [custom_components.visonic.pyvisonic] =============================================== Display Status ===============================================
23972020-10-30 11:33:19 INFO (MainThread) [custom_components.visonic.pyvisonic]      key 0  Sensor id=1  dname=Z01  stype=Magnet   zname=Front door     ztypeName=Delay 1    ztamper=0  ztrip=0  bypass=0  lowbatt=0  status=0  tamper=0  enrolled=1  triggered=0 
23982020-10-30 11:33:19 INFO (MainThread) [custom_components.visonic.pyvisonic]      key 1  Sensor id=2  dname=Z02  stype=Motion   zname=Hall           ztypeName=Delay 1    ztamper=0  ztrip=0  bypass=0  lowbatt=0  status=0  tamper=0  enrolled=1  triggered=0 
23992020-10-30 11:33:19 INFO (MainThread) [custom_components.visonic.pyvisonic]      key 2  Sensor id=3  dname=Z03  stype=Motion   zname=Dining room    ztypeName=Perimeter  ztamper=0  ztrip=0  bypass=0  lowbatt=0  status=0  tamper=0  enrolled=1  triggered=0 
24002020-10-30 11:33:19 INFO (MainThread) [custom_components.visonic.pyvisonic]      key 3  Sensor id=4  dname=Z04  stype=Motion   zname=Living room    ztypeName=Perimeter  ztamper=0  ztrip=0  bypass=0  lowbatt=0  status=0  tamper=0  enrolled=1  triggered=0 
24012020-10-30 11:33:19 INFO (MainThread) [custom_components.visonic.pyvisonic]    Model PowerMax Pro           PowerMaster No                     LastEvent None                   Ready   Yes          
24022020-10-30 11:33:19 INFO (MainThread) [custom_components.visonic.pyvisonic]    Mode  Powerlink              Status      Disarmed               Armed     No                     Trouble None              AlarmStatus None        
24032020-10-30 11:33:19 INFO (MainThread) [custom_components.visonic.pyvisonic] ==============================================================================================================
24042020-10-30 11:33:49 INFO (MainThread) [custom_components.visonic.pyvisonic] [data receiver] *** Received validated message 0XAB ***
24052020-10-30 11:33:49 INFO (MainThread) [custom_components.visonic.pyvisonic] [handle_msgtypeAB] ***************************** Got PowerLink Keep-Alive ****************************
24062020-10-30 11:33:49 INFO (MainThread) [custom_components.visonic.pyvisonic] =============================================== Display Status ===============================================
24072020-10-30 11:33:49 INFO (MainThread) [custom_components.visonic.pyvisonic]      key 0  Sensor id=1  dname=Z01  stype=Magnet   zname=Front door     ztypeName=Delay 1    ztamper=0  ztrip=0  bypass=0  lowbatt=0  status=0  tamper=0  enrolled=1  triggered=0 
24082020-10-30 11:33:49 INFO (MainThread) [custom_components.visonic.pyvisonic]      key 1  Sensor id=2  dname=Z02  stype=Motion   zname=Hall           ztypeName=Delay 1    ztamper=0  ztrip=0  bypass=0  lowbatt=0  status=0  tamper=0  enrolled=1  triggered=0 
24092020-10-30 11:33:49 INFO (MainThread) [custom_components.visonic.pyvisonic]      key 2  Sensor id=3  dname=Z03  stype=Motion   zname=Dining room    ztypeName=Perimeter  ztamper=0  ztrip=0  bypass=0  lowbatt=0  status=0  tamper=0  enrolled=1  triggered=0 
24102020-10-30 11:33:49 INFO (MainThread) [custom_components.visonic.pyvisonic]      key 3  Sensor id=4  dname=Z04  stype=Motion   zname=Living room    ztypeName=Perimeter  ztamper=0  ztrip=0  bypass=0  lowbatt=0  status=0  tamper=0  enrolled=1  triggered=0 
24112020-10-30 11:33:49 INFO (MainThread) [custom_components.visonic.pyvisonic]    Model PowerMax Pro           PowerMaster No                     LastEvent None                   Ready   Yes          
24122020-10-30 11:33:49 INFO (MainThread) [custom_components.visonic.pyvisonic]    Mode  Powerlink              Status      Disarmed               Armed     No                     Trouble None              AlarmStatus None        
24132020-10-30 11:33:49 INFO (MainThread) [custom_components.visonic.pyvisonic] ==============================================================================================================
24142020-10-30 11:34:19 INFO (MainThread) [custom_components.visonic.pyvisonic] [data receiver] *** Received validated message 0XAB ***
24152020-10-30 11:34:19 INFO (MainThread) [custom_components.visonic.pyvisonic] [handle_msgtypeAB] ***************************** Got PowerLink Keep-Alive ****************************
24162020-10-30 11:34:19 INFO (MainThread) [custom_components.visonic.pyvisonic] =============================================== Display Status ===============================================
24172020-10-30 11:34:19 INFO (MainThread) [custom_components.visonic.pyvisonic]      key 0  Sensor id=1  dname=Z01  stype=Magnet   zname=Front door     ztypeName=Delay 1    ztamper=0  ztrip=0  bypass=0  lowbatt=0  status=0  tamper=0  enrolled=1  triggered=0 
24182020-10-30 11:34:19 INFO (MainThread) [custom_components.visonic.pyvisonic]      key 1  Sensor id=2  dname=Z02  stype=Motion   zname=Hall           ztypeName=Delay 1    ztamper=0  ztrip=0  bypass=0  lowbatt=0  status=0  tamper=0  enrolled=1  triggered=0 
24192020-10-30 11:34:19 INFO (MainThread) [custom_components.visonic.pyvisonic]      key 2  Sensor id=3  dname=Z03  stype=Motion   zname=Dining room    ztypeName=Perimeter  ztamper=0  ztrip=0  bypass=0  lowbatt=0  status=0  tamper=0  enrolled=1  triggered=0 
24202020-10-30 11:34:19 INFO (MainThread) [custom_components.visonic.pyvisonic]      key 3  Sensor id=4  dname=Z04  stype=Motion   zname=Living room    ztypeName=Perimeter  ztamper=0  ztrip=0  bypass=0  lowbatt=0  status=0  tamper=0  enrolled=1  triggered=0 
24212020-10-30 11:34:19 INFO (MainThread) [custom_components.visonic.pyvisonic]    Model PowerMax Pro           PowerMaster No                     LastEvent None                   Ready   Yes          
24222020-10-30 11:34:19 INFO (MainThread) [custom_components.visonic.pyvisonic]    Mode  Powerlink              Status      Disarmed               Armed     No                     Trouble None              AlarmStatus None        
24232020-10-30 11:34:19 INFO (MainThread) [custom_components.visonic.pyvisonic] ==============================================================================================================
24242020-10-30 11:34:49 INFO (MainThread) [custom_components.visonic.pyvisonic] [data receiver] *** Received validated message 0XAB ***
24252020-10-30 11:34:49 INFO (MainThread) [custom_components.visonic.pyvisonic] [handle_msgtypeAB] ***************************** Got PowerLink Keep-Alive ****************************
24262020-10-30 11:34:49 INFO (MainThread) [custom_components.visonic.pyvisonic] =============================================== Display Status ===============================================
24272020-10-30 11:34:49 INFO (MainThread) [custom_components.visonic.pyvisonic]      key 0  Sensor id=1  dname=Z01  stype=Magnet   zname=Front door     ztypeName=Delay 1    ztamper=0  ztrip=0  bypass=0  lowbatt=0  status=0  tamper=0  enrolled=1  triggered=0 
24282020-10-30 11:34:49 INFO (MainThread) [custom_components.visonic.pyvisonic]      key 1  Sensor id=2  dname=Z02  stype=Motion   zname=Hall           ztypeName=Delay 1    ztamper=0  ztrip=0  bypass=0  lowbatt=0  status=0  tamper=0  enrolled=1  triggered=0 
24292020-10-30 11:34:49 INFO (MainThread) [custom_components.visonic.pyvisonic]      key 2  Sensor id=3  dname=Z03  stype=Motion   zname=Dining room    ztypeName=Perimeter  ztamper=0  ztrip=0  bypass=0  lowbatt=0  status=0  tamper=0  enrolled=1  triggered=0 
24302020-10-30 11:34:49 INFO (MainThread) [custom_components.visonic.pyvisonic]      key 3  Sensor id=4  dname=Z04  stype=Motion   zname=Living room    ztypeName=Perimeter  ztamper=0  ztrip=0  bypass=0  lowbatt=0  status=0  tamper=0  enrolled=1  triggered=0 
24312020-10-30 11:34:49 INFO (MainThread) [custom_components.visonic.pyvisonic]    Model PowerMax Pro           PowerMaster No                     LastEvent None                   Ready   Yes          
24322020-10-30 11:34:49 INFO (MainThread) [custom_components.visonic.pyvisonic]    Mode  Powerlink              Status      Disarmed               Armed     No                     Trouble None              AlarmStatus None        
24332020-10-30 11:34:49 INFO (MainThread) [custom_components.visonic.pyvisonic] ==============================================================================================================
24342020-10-30 11:35:19 INFO (MainThread) [custom_components.visonic.pyvisonic] [data receiver] *** Received validated message 0XAB ***
24352020-10-30 11:35:19 INFO (MainThread) [custom_components.visonic.pyvisonic] [handle_msgtypeAB] ***************************** Got PowerLink Keep-Alive ****************************
24362020-10-30 11:35:19 INFO (MainThread) [custom_components.visonic.pyvisonic] =============================================== Display Status ===============================================
24372020-10-30 11:35:19 INFO (MainThread) [custom_components.visonic.pyvisonic]      key 0  Sensor id=1  dname=Z01  stype=Magnet   zname=Front door     ztypeName=Delay 1    ztamper=0  ztrip=0  bypass=0  lowbatt=0  status=0  tamper=0  enrolled=1  triggered=0 
24382020-10-30 11:35:19 INFO (MainThread) [custom_components.visonic.pyvisonic]      key 1  Sensor id=2  dname=Z02  stype=Motion   zname=Hall           ztypeName=Delay 1    ztamper=0  ztrip=0  bypass=0  lowbatt=0  status=0  tamper=0  enrolled=1  triggered=0 
24392020-10-30 11:35:19 INFO (MainThread) [custom_components.visonic.pyvisonic]      key 2  Sensor id=3  dname=Z03  stype=Motion   zname=Dining room    ztypeName=Perimeter  ztamper=0  ztrip=0  bypass=0  lowbatt=0  status=0  tamper=0  enrolled=1  triggered=0 
24402020-10-30 11:35:19 INFO (MainThread) [custom_components.visonic.pyvisonic]      key 3  Sensor id=4  dname=Z04  stype=Motion   zname=Living room    ztypeName=Perimeter  ztamper=0  ztrip=0  bypass=0  lowbatt=0  status=0  tamper=0  enrolled=1  triggered=0 
24412020-10-30 11:35:19 INFO (MainThread) [custom_components.visonic.pyvisonic]    Model PowerMax Pro           PowerMaster No                     LastEvent None                   Ready   Yes          
24422020-10-30 11:35:19 INFO (MainThread) [custom_components.visonic.pyvisonic]    Mode  Powerlink              Status      Disarmed               Armed     No                     Trouble None              AlarmStatus None        
24432020-10-30 11:35:19 INFO (MainThread) [custom_components.visonic.pyvisonic] ==============================================================================================================
24442020-10-30 11:35:49 INFO (MainThread) [custom_components.visonic.pyvisonic] [data receiver] *** Received validated message 0XAB ***
24452020-10-30 11:35:49 INFO (MainThread) [custom_components.visonic.pyvisonic] [handle_msgtypeAB] ***************************** Got PowerLink Keep-Alive ****************************
24462020-10-30 11:35:49 INFO (MainThread) [custom_components.visonic.pyvisonic] =============================================== Display Status ===============================================
24472020-10-30 11:35:49 INFO (MainThread) [custom_components.visonic.pyvisonic]      key 0  Sensor id=1  dname=Z01  stype=Magnet   zname=Front door     ztypeName=Delay 1    ztamper=0  ztrip=0  bypass=0  lowbatt=0  status=0  tamper=0  enrolled=1  triggered=0 
24482020-10-30 11:35:49 INFO (MainThread) [custom_components.visonic.pyvisonic]      key 1  Sensor id=2  dname=Z02  stype=Motion   zname=Hall           ztypeName=Delay 1    ztamper=0  ztrip=0  bypass=0  lowbatt=0  status=0  tamper=0  enrolled=1  triggered=0 
24492020-10-30 11:35:49 INFO (MainThread) [custom_components.visonic.pyvisonic]      key 2  Sensor id=3  dname=Z03  stype=Motion   zname=Dining room    ztypeName=Perimeter  ztamper=0  ztrip=0  bypass=0  lowbatt=0  status=0  tamper=0  enrolled=1  triggered=0 
24502020-10-30 11:35:49 INFO (MainThread) [custom_components.visonic.pyvisonic]      key 3  Sensor id=4  dname=Z04  stype=Motion   zname=Living room    ztypeName=Perimeter  ztamper=0  ztrip=0  bypass=0  lowbatt=0  status=0  tamper=0  enrolled=1  triggered=0 
24512020-10-30 11:35:49 INFO (MainThread) [custom_components.visonic.pyvisonic]    Model PowerMax Pro           PowerMaster No                     LastEvent None                   Ready   Yes          
24522020-10-30 11:35:49 INFO (MainThread) [custom_components.visonic.pyvisonic]    Mode  Powerlink              Status      Disarmed               Armed     No                     Trouble None              AlarmStatus None        
24532020-10-30 11:35:49 INFO (MainThread) [custom_components.visonic.pyvisonic] ==============================================================================================================
24542020-10-30 11:36:19 INFO (MainThread) [custom_components.visonic.pyvisonic] [data receiver] *** Received validated message 0XAB ***
24552020-10-30 11:36:19 INFO (MainThread) [custom_components.visonic.pyvisonic] [handle_msgtypeAB] ***************************** Got PowerLink Keep-Alive ****************************
24562020-10-30 11:36:19 INFO (MainThread) [custom_components.visonic.pyvisonic] =============================================== Display Status ===============================================
24572020-10-30 11:36:19 INFO (MainThread) [custom_components.visonic.pyvisonic]      key 0  Sensor id=1  dname=Z01  stype=Magnet   zname=Front door     ztypeName=Delay 1    ztamper=0  ztrip=0  bypass=0  lowbatt=0  status=0  tamper=0  enrolled=1  triggered=0 
24582020-10-30 11:36:19 INFO (MainThread) [custom_components.visonic.pyvisonic]      key 1  Sensor id=2  dname=Z02  stype=Motion   zname=Hall           ztypeName=Delay 1    ztamper=0  ztrip=0  bypass=0  lowbatt=0  status=0  tamper=0  enrolled=1  triggered=0 
24592020-10-30 11:36:19 INFO (MainThread) [custom_components.visonic.pyvisonic]      key 2  Sensor id=3  dname=Z03  stype=Motion   zname=Dining room    ztypeName=Perimeter  ztamper=0  ztrip=0  bypass=0  lowbatt=0  status=0  tamper=0  enrolled=1  triggered=0 
24602020-10-30 11:36:19 INFO (MainThread) [custom_components.visonic.pyvisonic]      key 3  Sensor id=4  dname=Z04  stype=Motion   zname=Living room    ztypeName=Perimeter  ztamper=0  ztrip=0  bypass=0  lowbatt=0  status=0  tamper=0  enrolled=1  triggered=0 
24612020-10-30 11:36:19 INFO (MainThread) [custom_components.visonic.pyvisonic]    Model PowerMax Pro           PowerMaster No                     LastEvent None                   Ready   Yes          
24622020-10-30 11:36:19 INFO (MainThread) [custom_components.visonic.pyvisonic]    Mode  Powerlink              Status      Disarmed               Armed     No                     Trouble None              AlarmStatus None        
24632020-10-30 11:36:19 INFO (MainThread) [custom_components.visonic.pyvisonic] ==============================================================================================================
24642020-10-30 11:36:41 INFO (MainThread) [custom_components.visonic.pyvisonic] [data receiver] *** Received validated message 0XA5 ***
24652020-10-30 11:36:49 INFO (MainThread) [custom_components.visonic.pyvisonic] [data receiver] *** Received validated message 0XAB ***
24662020-10-30 11:36:49 INFO (MainThread) [custom_components.visonic.pyvisonic] [handle_msgtypeAB] ***************************** Got PowerLink Keep-Alive ****************************
24672020-10-30 11:36:49 INFO (MainThread) [custom_components.visonic.pyvisonic] =============================================== Display Status ===============================================
24682020-10-30 11:36:49 INFO (MainThread) [custom_components.visonic.pyvisonic]      key 0  Sensor id=1  dname=Z01  stype=Magnet   zname=Front door     ztypeName=Delay 1    ztamper=0  ztrip=0  bypass=0  lowbatt=0  status=0  tamper=0  enrolled=1  triggered=0 
24692020-10-30 11:36:49 INFO (MainThread) [custom_components.visonic.pyvisonic]      key 1  Sensor id=2  dname=Z02  stype=Motion   zname=Hall           ztypeName=Delay 1    ztamper=0  ztrip=0  bypass=0  lowbatt=0  status=0  tamper=0  enrolled=1  triggered=0 
24702020-10-30 11:36:49 INFO (MainThread) [custom_components.visonic.pyvisonic]      key 2  Sensor id=3  dname=Z03  stype=Motion   zname=Dining room    ztypeName=Perimeter  ztamper=0  ztrip=0  bypass=0  lowbatt=0  status=0  tamper=0  enrolled=1  triggered=0 
24712020-10-30 11:36:49 INFO (MainThread) [custom_components.visonic.pyvisonic]      key 3  Sensor id=4  dname=Z04  stype=Motion   zname=Living room    ztypeName=Perimeter  ztamper=0  ztrip=0  bypass=0  lowbatt=0  status=0  tamper=0  enrolled=1  triggered=0 
24722020-10-30 11:36:49 INFO (MainThread) [custom_components.visonic.pyvisonic]    Model PowerMax Pro           PowerMaster No                     LastEvent None                   Ready   Yes          
24732020-10-30 11:36:49 INFO (MainThread) [custom_components.visonic.pyvisonic]    Mode  Powerlink              Status      Disarmed               Armed     No                     Trouble None              AlarmStatus None        
24742020-10-30 11:36:49 INFO (MainThread) [custom_components.visonic.pyvisonic] ==============================================================================================================
24752020-10-30 11:36:53 INFO (MainThread) [custom_components.visonic.pyvisonic] [data receiver] *** Received validated message 0XA5 ***
24762020-10-30 11:37:19 INFO (MainThread) [custom_components.visonic.pyvisonic] [data receiver] *** Received validated message 0XAB ***
24772020-10-30 11:37:19 INFO (MainThread) [custom_components.visonic.pyvisonic] [handle_msgtypeAB] ***************************** Got PowerLink Keep-Alive ****************************
24782020-10-30 11:37:19 INFO (MainThread) [custom_components.visonic.pyvisonic] =============================================== Display Status ===============================================
24792020-10-30 11:37:19 INFO (MainThread) [custom_components.visonic.pyvisonic]      key 0  Sensor id=1  dname=Z01  stype=Magnet   zname=Front door     ztypeName=Delay 1    ztamper=0  ztrip=0  bypass=0  lowbatt=0  status=0  tamper=0  enrolled=1  triggered=0 
24802020-10-30 11:37:19 INFO (MainThread) [custom_components.visonic.pyvisonic]      key 1  Sensor id=2  dname=Z02  stype=Motion   zname=Hall           ztypeName=Delay 1    ztamper=0  ztrip=0  bypass=0  lowbatt=0  status=0  tamper=0  enrolled=1  triggered=0 
24812020-10-30 11:37:19 INFO (MainThread) [custom_components.visonic.pyvisonic]      key 2  Sensor id=3  dname=Z03  stype=Motion   zname=Dining room    ztypeName=Perimeter  ztamper=0  ztrip=0  bypass=0  lowbatt=0  status=0  tamper=0  enrolled=1  triggered=0 
24822020-10-30 11:37:19 INFO (MainThread) [custom_components.visonic.pyvisonic]      key 3  Sensor id=4  dname=Z04  stype=Motion   zname=Living room    ztypeName=Perimeter  ztamper=0  ztrip=0  bypass=0  lowbatt=0  status=0  tamper=0  enrolled=1  triggered=0 
24832020-10-30 11:37:19 INFO (MainThread) [custom_components.visonic.pyvisonic]    Model PowerMax Pro           PowerMaster No                     LastEvent None                   Ready   Yes          
24842020-10-30 11:37:19 INFO (MainThread) [custom_components.visonic.pyvisonic]    Mode  Powerlink              Status      Disarmed               Armed     No                     Trouble None              AlarmStatus None        
24852020-10-30 11:37:19 INFO (MainThread) [custom_components.visonic.pyvisonic] ==============================================================================================================
24862020-10-30 11:37:49 INFO (MainThread) [custom_components.visonic.pyvisonic] [data receiver] *** Received validated message 0XAB ***
24872020-10-30 11:37:49 INFO (MainThread) [custom_components.visonic.pyvisonic] [handle_msgtypeAB] ***************************** Got PowerLink Keep-Alive ****************************
24882020-10-30 11:37:49 INFO (MainThread) [custom_components.visonic.pyvisonic] =============================================== Display Status ===============================================
24892020-10-30 11:37:49 INFO (MainThread) [custom_components.visonic.pyvisonic]      key 0  Sensor id=1  dname=Z01  stype=Magnet   zname=Front door     ztypeName=Delay 1    ztamper=0  ztrip=0  bypass=0  lowbatt=0  status=0  tamper=0  enrolled=1  triggered=0 
24902020-10-30 11:37:49 INFO (MainThread) [custom_components.visonic.pyvisonic]      key 1  Sensor id=2  dname=Z02  stype=Motion   zname=Hall           ztypeName=Delay 1    ztamper=0  ztrip=0  bypass=0  lowbatt=0  status=0  tamper=0  enrolled=1  triggered=0 
24912020-10-30 11:37:49 INFO (MainThread) [custom_components.visonic.pyvisonic]      key 2  Sensor id=3  dname=Z03  stype=Motion   zname=Dining room    ztypeName=Perimeter  ztamper=0  ztrip=0  bypass=0  lowbatt=0  status=0  tamper=0  enrolled=1  triggered=0 
24922020-10-30 11:37:49 INFO (MainThread) [custom_components.visonic.pyvisonic]      key 3  Sensor id=4  dname=Z04  stype=Motion   zname=Living room    ztypeName=Perimeter  ztamper=0  ztrip=0  bypass=0  lowbatt=0  status=0  tamper=0  enrolled=1  triggered=0 
24932020-10-30 11:37:49 INFO (MainThread) [custom_components.visonic.pyvisonic]    Model PowerMax Pro           PowerMaster No                     LastEvent None                   Ready   Yes          
24942020-10-30 11:37:49 INFO (MainThread) [custom_components.visonic.pyvisonic]    Mode  Powerlink              Status      Disarmed               Armed     No                     Trouble None              AlarmStatus None        
24952020-10-30 11:37:49 INFO (MainThread) [custom_components.visonic.pyvisonic] ==============================================================================================================
24962020-10-30 11:38:19 INFO (MainThread) [custom_components.visonic.pyvisonic] [data receiver] *** Received validated message 0XAB ***
24972020-10-30 11:38:19 INFO (MainThread) [custom_components.visonic.pyvisonic] [handle_msgtypeAB] ***************************** Got PowerLink Keep-Alive ****************************
24982020-10-30 11:38:19 INFO (MainThread) [custom_components.visonic.pyvisonic] =============================================== Display Status ===============================================
24992020-10-30 11:38:19 INFO (MainThread) [custom_components.visonic.pyvisonic]      key 0  Sensor id=1  dname=Z01  stype=Magnet   zname=Front door     ztypeName=Delay 1    ztamper=0  ztrip=0  bypass=0  lowbatt=0  status=0  tamper=0  enrolled=1  triggered=0 
25002020-10-30 11:38:19 INFO (MainThread) [custom_components.visonic.pyvisonic]      key 1  Sensor id=2  dname=Z02  stype=Motion   zname=Hall           ztypeName=Delay 1    ztamper=0  ztrip=0  bypass=0  lowbatt=0  status=0  tamper=0  enrolled=1  triggered=0 
25012020-10-30 11:38:19 INFO (MainThread) [custom_components.visonic.pyvisonic]      key 2  Sensor id=3  dname=Z03  stype=Motion   zname=Dining room    ztypeName=Perimeter  ztamper=0  ztrip=0  bypass=0  lowbatt=0  status=0  tamper=0  enrolled=1  triggered=0 
25022020-10-30 11:38:19 INFO (MainThread) [custom_components.visonic.pyvisonic]      key 3  Sensor id=4  dname=Z04  stype=Motion   zname=Living room    ztypeName=Perimeter  ztamper=0  ztrip=0  bypass=0  lowbatt=0  status=0  tamper=0  enrolled=1  triggered=0 
25032020-10-30 11:38:19 INFO (MainThread) [custom_components.visonic.pyvisonic]    Model PowerMax Pro           PowerMaster No                     LastEvent None                   Ready   Yes          
25042020-10-30 11:38:19 INFO (MainThread) [custom_components.visonic.pyvisonic]    Mode  Powerlink              Status      Disarmed               Armed     No                     Trouble None              AlarmStatus None        
25052020-10-30 11:38:19 INFO (MainThread) [custom_components.visonic.pyvisonic] ==============================================================================================================
25062020-10-30 11:38:49 INFO (MainThread) [custom_components.visonic.pyvisonic] [data receiver] *** Received validated message 0XAB ***
25072020-10-30 11:38:49 INFO (MainThread) [custom_components.visonic.pyvisonic] [handle_msgtypeAB] ***************************** Got PowerLink Keep-Alive ****************************
25082020-10-30 11:38:49 INFO (MainThread) [custom_components.visonic.pyvisonic] =============================================== Display Status ===============================================
25092020-10-30 11:38:49 INFO (MainThread) [custom_components.visonic.pyvisonic]      key 0  Sensor id=1  dname=Z01  stype=Magnet   zname=Front door     ztypeName=Delay 1    ztamper=0  ztrip=0  bypass=0  lowbatt=0  status=0  tamper=0  enrolled=1  triggered=0 
25102020-10-30 11:38:49 INFO (MainThread) [custom_components.visonic.pyvisonic]      key 1  Sensor id=2  dname=Z02  stype=Motion   zname=Hall           ztypeName=Delay 1    ztamper=0  ztrip=0  bypass=0  lowbatt=0  status=0  tamper=0  enrolled=1  triggered=0 
25112020-10-30 11:38:49 INFO (MainThread) [custom_components.visonic.pyvisonic]      key 2  Sensor id=3  dname=Z03  stype=Motion   zname=Dining room    ztypeName=Perimeter  ztamper=0  ztrip=0  bypass=0  lowbatt=0  status=0  tamper=0  enrolled=1  triggered=0 
25122020-10-30 11:38:49 INFO (MainThread) [custom_components.visonic.pyvisonic]      key 3  Sensor id=4  dname=Z04  stype=Motion   zname=Living room    ztypeName=Perimeter  ztamper=0  ztrip=0  bypass=0  lowbatt=0  status=0  tamper=0  enrolled=1  triggered=0 
25132020-10-30 11:38:49 INFO (MainThread) [custom_components.visonic.pyvisonic]    Model PowerMax Pro           PowerMaster No                     LastEvent None                   Ready   Yes          
25142020-10-30 11:38:49 INFO (MainThread) [custom_components.visonic.pyvisonic]    Mode  Powerlink              Status      Disarmed               Armed     No                     Trouble None              AlarmStatus None        
25152020-10-30 11:38:49 INFO (MainThread) [custom_components.visonic.pyvisonic] ==============================================================================================================
25162020-10-30 11:39:19 INFO (MainThread) [custom_components.visonic.pyvisonic] [data receiver] *** Received validated message 0XAB ***
25172020-10-30 11:39:19 INFO (MainThread) [custom_components.visonic.pyvisonic] [handle_msgtypeAB] ***************************** Got PowerLink Keep-Alive ****************************
25182020-10-30 11:39:19 INFO (MainThread) [custom_components.visonic.pyvisonic] =============================================== Display Status ===============================================
25192020-10-30 11:39:19 INFO (MainThread) [custom_components.visonic.pyvisonic]      key 0  Sensor id=1  dname=Z01  stype=Magnet   zname=Front door     ztypeName=Delay 1    ztamper=0  ztrip=0  bypass=0  lowbatt=0  status=0  tamper=0  enrolled=1  triggered=0 
25202020-10-30 11:39:19 INFO (MainThread) [custom_components.visonic.pyvisonic]      key 1  Sensor id=2  dname=Z02  stype=Motion   zname=Hall           ztypeName=Delay 1    ztamper=0  ztrip=0  bypass=0  lowbatt=0  status=0  tamper=0  enrolled=1  triggered=0 
25212020-10-30 11:39:19 INFO (MainThread) [custom_components.visonic.pyvisonic]      key 2  Sensor id=3  dname=Z03  stype=Motion   zname=Dining room    ztypeName=Perimeter  ztamper=0  ztrip=0  bypass=0  lowbatt=0  status=0  tamper=0  enrolled=1  triggered=0 
25222020-10-30 11:39:19 INFO (MainThread) [custom_components.visonic.pyvisonic]      key 3  Sensor id=4  dname=Z04  stype=Motion   zname=Living room    ztypeName=Perimeter  ztamper=0  ztrip=0  bypass=0  lowbatt=0  status=0  tamper=0  enrolled=1  triggered=0 
25232020-10-30 11:39:19 INFO (MainThread) [custom_components.visonic.pyvisonic]    Model PowerMax Pro           PowerMaster No                     LastEvent None                   Ready   Yes          
25242020-10-30 11:39:19 INFO (MainThread) [custom_components.visonic.pyvisonic]    Mode  Powerlink              Status      Disarmed               Armed     No                     Trouble None              AlarmStatus None        
25252020-10-30 11:39:19 INFO (MainThread) [custom_components.visonic.pyvisonic] ==============================================================================================================
25262020-10-30 11:39:49 INFO (MainThread) [custom_components.visonic.pyvisonic] [data receiver] *** Received validated message 0XAB ***
25272020-10-30 11:39:49 INFO (MainThread) [custom_components.visonic.pyvisonic] [handle_msgtypeAB] ***************************** Got PowerLink Keep-Alive ****************************
25282020-10-30 11:39:49 INFO (MainThread) [custom_components.visonic.pyvisonic] =============================================== Display Status ===============================================
25292020-10-30 11:39:49 INFO (MainThread) [custom_components.visonic.pyvisonic]      key 0  Sensor id=1  dname=Z01  stype=Magnet   zname=Front door     ztypeName=Delay 1    ztamper=0  ztrip=0  bypass=0  lowbatt=0  status=0  tamper=0  enrolled=1  triggered=0 
25302020-10-30 11:39:49 INFO (MainThread) [custom_components.visonic.pyvisonic]      key 1  Sensor id=2  dname=Z02  stype=Motion   zname=Hall           ztypeName=Delay 1    ztamper=0  ztrip=0  bypass=0  lowbatt=0  status=0  tamper=0  enrolled=1  triggered=0 
25312020-10-30 11:39:49 INFO (MainThread) [custom_components.visonic.pyvisonic]      key 2  Sensor id=3  dname=Z03  stype=Motion   zname=Dining room    ztypeName=Perimeter  ztamper=0  ztrip=0  bypass=0  lowbatt=0  status=0  tamper=0  enrolled=1  triggered=0 
25322020-10-30 11:39:49 INFO (MainThread) [custom_components.visonic.pyvisonic]      key 3  Sensor id=4  dname=Z04  stype=Motion   zname=Living room    ztypeName=Perimeter  ztamper=0  ztrip=0  bypass=0  lowbatt=0  status=0  tamper=0  enrolled=1  triggered=0 
25332020-10-30 11:39:49 INFO (MainThread) [custom_components.visonic.pyvisonic]    Model PowerMax Pro           PowerMaster No                     LastEvent None                   Ready   Yes          
25342020-10-30 11:39:49 INFO (MainThread) [custom_components.visonic.pyvisonic]    Mode  Powerlink              Status      Disarmed               Armed     No                     Trouble None              AlarmStatus None        
25352020-10-30 11:39:49 INFO (MainThread) [custom_components.visonic.pyvisonic] ==============================================================================================================
25362020-10-30 11:40:19 INFO (MainThread) [custom_components.visonic.pyvisonic] [data receiver] *** Received validated message 0XAB ***
25372020-10-30 11:40:19 INFO (MainThread) [custom_components.visonic.pyvisonic] [handle_msgtypeAB] ***************************** Got PowerLink Keep-Alive ****************************
25382020-10-30 11:40:19 INFO (MainThread) [custom_components.visonic.pyvisonic] =============================================== Display Status ===============================================
25392020-10-30 11:40:19 INFO (MainThread) [custom_components.visonic.pyvisonic]      key 0  Sensor id=1  dname=Z01  stype=Magnet   zname=Front door     ztypeName=Delay 1    ztamper=0  ztrip=0  bypass=0  lowbatt=0  status=0  tamper=0  enrolled=1  triggered=0 
25402020-10-30 11:40:19 INFO (MainThread) [custom_components.visonic.pyvisonic]      key 1  Sensor id=2  dname=Z02  stype=Motion   zname=Hall           ztypeName=Delay 1    ztamper=0  ztrip=0  bypass=0  lowbatt=0  status=0  tamper=0  enrolled=1  triggered=0 
25412020-10-30 11:40:19 INFO (MainThread) [custom_components.visonic.pyvisonic]      key 2  Sensor id=3  dname=Z03  stype=Motion   zname=Dining room    ztypeName=Perimeter  ztamper=0  ztrip=0  bypass=0  lowbatt=0  status=0  tamper=0  enrolled=1  triggered=0 
25422020-10-30 11:40:19 INFO (MainThread) [custom_components.visonic.pyvisonic]      key 3  Sensor id=4  dname=Z04  stype=Motion   zname=Living room    ztypeName=Perimeter  ztamper=0  ztrip=0  bypass=0  lowbatt=0  status=0  tamper=0  enrolled=1  triggered=0 
25432020-10-30 11:40:19 INFO (MainThread) [custom_components.visonic.pyvisonic]    Model PowerMax Pro           PowerMaster No                     LastEvent None                   Ready   Yes          
25442020-10-30 11:40:19 INFO (MainThread) [custom_components.visonic.pyvisonic]    Mode  Powerlink              Status      Disarmed               Armed     No                     Trouble None              AlarmStatus None        
25452020-10-30 11:40:19 INFO (MainThread) [custom_components.visonic.pyvisonic] ==============================================================================================================
25462020-10-30 11:40:49 INFO (MainThread) [custom_components.visonic.pyvisonic] [data receiver] *** Received validated message 0XAB ***
25472020-10-30 11:40:49 INFO (MainThread) [custom_components.visonic.pyvisonic] [handle_msgtypeAB] ***************************** Got PowerLink Keep-Alive ****************************
25482020-10-30 11:40:49 INFO (MainThread) [custom_components.visonic.pyvisonic] =============================================== Display Status ===============================================
25492020-10-30 11:40:49 INFO (MainThread) [custom_components.visonic.pyvisonic]      key 0  Sensor id=1  dname=Z01  stype=Magnet   zname=Front door     ztypeName=Delay 1    ztamper=0  ztrip=0  bypass=0  lowbatt=0  status=0  tamper=0  enrolled=1  triggered=0 
25502020-10-30 11:40:49 INFO (MainThread) [custom_components.visonic.pyvisonic]      key 1  Sensor id=2  dname=Z02  stype=Motion   zname=Hall           ztypeName=Delay 1    ztamper=0  ztrip=0  bypass=0  lowbatt=0  status=0  tamper=0  enrolled=1  triggered=0 
25512020-10-30 11:40:49 INFO (MainThread) [custom_components.visonic.pyvisonic]      key 2  Sensor id=3  dname=Z03  stype=Motion   zname=Dining room    ztypeName=Perimeter  ztamper=0  ztrip=0  bypass=0  lowbatt=0  status=0  tamper=0  enrolled=1  triggered=0 
25522020-10-30 11:40:49 INFO (MainThread) [custom_components.visonic.pyvisonic]      key 3  Sensor id=4  dname=Z04  stype=Motion   zname=Living room    ztypeName=Perimeter  ztamper=0  ztrip=0  bypass=0  lowbatt=0  status=0  tamper=0  enrolled=1  triggered=0 
25532020-10-30 11:40:49 INFO (MainThread) [custom_components.visonic.pyvisonic]    Model PowerMax Pro           PowerMaster No                     LastEvent None                   Ready   Yes          
25542020-10-30 11:40:49 INFO (MainThread) [custom_components.visonic.pyvisonic]    Mode  Powerlink              Status      Disarmed               Armed     No                     Trouble None              AlarmStatus None        
25552020-10-30 11:40:49 INFO (MainThread) [custom_components.visonic.pyvisonic] ==============================================================================================================
25562020-10-30 11:41:19 INFO (MainThread) [custom_components.visonic.pyvisonic] [data receiver] *** Received validated message 0XAB ***
25572020-10-30 11:41:19 INFO (MainThread) [custom_components.visonic.pyvisonic] [handle_msgtypeAB] ***************************** Got PowerLink Keep-Alive ****************************
25582020-10-30 11:41:19 INFO (MainThread) [custom_components.visonic.pyvisonic] =============================================== Display Status ===============================================
2559
2560