· 10 years ago · Sep 13, 2016, 06:16 PM
1[ 0.000000] X86_SUBARCH default (0)
2[ 0.000000] Initializing cgroup subsys cpuset
3[ 0.000000] Initializing cgroup subsys cpu
4[ 0.000000] Initializing cgroup subsys cpuacct
5[ 0.000000] Linux version 3.10.20 (root@furciadifers) (gcc version 4.6.3 (Ubuntu/Linaro 4.6.3-1ubuntu5) ) #23 SMP PREEMPT Fri Sep 9 23:25:50 EEST 2016
6[ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-3.10.20 nosplash rootdelay=15 root=/dev/sda2 rw earlyprintk=nologger ptrace.ptrace_can_access=1 nmi_watchdog=panic softlockup_panic=1 loglevel=4 androidboot.bootmedia=sdcard androidboot.hardware=inet_w_32 androidboot.spid=xxxx:xxxx:xxxx:xxxx:xxxx:xxxx androidboot.serialno=01234567890123456789 oops=panic panic=50 vmalloc=172M slub_max_order=2 vga=current i915.modeset=0 drm.vblankoffdelay=1 acpi_backlight=vendor netconsole=4444@192.168.1.30/eth1,514@192.168.1.24,24:EC:99:45:7C:12 8723bs.blacklist=true
7[ 0.000000] KERNEL supported cpus:
8[ 0.000000] Intel GenuineIntel
9[ 0.000000] e820: BIOS-provided physical RAM map:
10[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000008efff] usable
11[ 0.000000] BIOS-e820: [mem 0x000000000008f000-0x000000000008ffff] ACPI NVS
12[ 0.000000] BIOS-e820: [mem 0x0000000000090000-0x000000000009dfff] usable
13[ 0.000000] BIOS-e820: [mem 0x000000000009e000-0x000000000009ffff] reserved
14[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000001fffffff] usable
15[ 0.000000] BIOS-e820: [mem 0x0000000020000000-0x00000000201fffff] reserved
16[ 0.000000] BIOS-e820: [mem 0x0000000020200000-0x000000007967efff] usable
17[ 0.000000] BIOS-e820: [mem 0x000000007967f000-0x000000007bceafff] reserved
18[ 0.000000] BIOS-e820: [mem 0x000000007bceb000-0x000000007bd1bfff] ACPI data
19[ 0.000000] BIOS-e820: [mem 0x000000007bd1c000-0x000000007c3f1fff] ACPI NVS
20[ 0.000000] BIOS-e820: [mem 0x000000007c3f2000-0x000000007c4f5fff] reserved
21[ 0.000000] BIOS-e820: [mem 0x000000007c4f6000-0x000000007c5ecfff] type 20
22[ 0.000000] BIOS-e820: [mem 0x000000007c5ed000-0x000000007c5f7fff] usable
23[ 0.000000] BIOS-e820: [mem 0x000000007c5f8000-0x000000007c5f8fff] reserved
24[ 0.000000] BIOS-e820: [mem 0x000000007c5f9000-0x000000007ccfffff] usable
25[ 0.000000] BIOS-e820: [mem 0x00000000e00f8000-0x00000000e00f8fff] reserved
26[ 0.000000] BIOS-e820: [mem 0x00000000fed01000-0x00000000fed01fff] reserved
27[ 0.000000] BIOS-e820: [mem 0x00000000fed08000-0x00000000fed08fff] reserved
28[ 0.000000] BIOS-e820: [mem 0x00000000ffae0000-0x00000000ffffffff] reserved
29[ 0.000000] NX (Execute Disable) protection: active
30[ 0.000000] efi: EFI v2.31 by TECLAST
31[ 0.000000] efi: ACPI=0x7bd1b000 ACPI 2.0=0x7bd1b014 SMBIOS=0x7c43cc98
32[ 0.000000] efi: mem00: type=7, attr=0xf, range=[0x0000000000000000-0x000000000008f000) (0MB)
33[ 0.000000] efi: mem01: type=10, attr=0xf, range=[0x000000000008f000-0x0000000000090000) (0MB)
34[ 0.000000] efi: mem02: type=7, attr=0xf, range=[0x0000000000090000-0x000000000009e000) (0MB)
35[ 0.000000] efi: mem03: type=0, attr=0xf, range=[0x000000000009e000-0x00000000000a0000) (0MB)
36[ 0.000000] efi: mem04: type=2, attr=0xf, range=[0x0000000000100000-0x000000000185c000) (23MB)
37[ 0.000000] efi: mem05: type=7, attr=0xf, range=[0x000000000185c000-0x0000000020000000) (487MB)
38[ 0.000000] efi: mem06: type=0, attr=0xf, range=[0x0000000020000000-0x0000000020200000) (2MB)
39[ 0.000000] efi: mem07: type=7, attr=0xf, range=[0x0000000020200000-0x0000000058457000) (898MB)
40[ 0.000000] efi: mem08: type=2, attr=0xf, range=[0x0000000058457000-0x0000000075c9c000) (472MB)
41[ 0.000000] efi: mem09: type=7, attr=0xf, range=[0x0000000075c9c000-0x0000000075ca2000) (0MB)
42[ 0.000000] efi: mem10: type=1, attr=0xf, range=[0x0000000075ca2000-0x00000000761f7000) (5MB)
43[ 0.000000] efi: mem11: type=4, attr=0xf, range=[0x00000000761f7000-0x0000000078d20000) (43MB)
44[ 0.000000] efi: mem12: type=7, attr=0xf, range=[0x0000000078d20000-0x000000007948e000) (7MB)
45[ 0.000000] efi: mem13: type=2, attr=0xf, range=[0x000000007948e000-0x0000000079497000) (0MB)
46[ 0.000000] efi: mem14: type=3, attr=0xf, range=[0x0000000079497000-0x000000007967f000) (1MB)
47[ 0.000000] efi: mem15: type=0, attr=0xf, range=[0x000000007967f000-0x000000007bceb000) (38MB)
48[ 0.000000] efi: mem16: type=9, attr=0xf, range=[0x000000007bceb000-0x000000007bd1c000) (0MB)
49[ 0.000000] efi: mem17: type=10, attr=0xf, range=[0x000000007bd1c000-0x000000007c3f2000) (6MB)
50[ 0.000000] efi: mem18: type=6, attr=0x800000000000000f, range=[0x000000007c3f2000-0x000000007c4f6000) (1MB)
51[ 0.000000] efi: mem19: type=5, attr=0x800000000000000f, range=[0x000000007c4f6000-0x000000007c5ed000) (0MB)
52[ 0.000000] efi: mem20: type=7, attr=0xf, range=[0x000000007c5ed000-0x000000007c5ee000) (0MB)
53[ 0.000000] efi: mem21: type=4, attr=0xf, range=[0x000000007c5ee000-0x000000007c5f8000) (0MB)
54[ 0.000000] efi: mem22: type=6, attr=0x800000000000000f, range=[0x000000007c5f8000-0x000000007c5f9000) (0MB)
55[ 0.000000] efi: mem23: type=4, attr=0xf, range=[0x000000007c5f9000-0x000000007c7b0000) (1MB)
56[ 0.000000] efi: mem24: type=2, attr=0xf, range=[0x000000007c7b0000-0x000000007c7b1000) (0MB)
57[ 0.000000] efi: mem25: type=4, attr=0xf, range=[0x000000007c7b1000-0x000000007ccf6000) (5MB)
58[ 0.000000] efi: mem26: type=2, attr=0xf, range=[0x000000007ccf6000-0x000000007ccf7000) (0MB)
59[ 0.000000] efi: mem27: type=4, attr=0xf, range=[0x000000007ccf7000-0x000000007cd00000) (0MB)
60[ 0.000000] efi: mem28: type=11, attr=0x8000000000000001, range=[0x00000000e00f8000-0x00000000e00f9000) (0MB)
61[ 0.000000] efi: mem29: type=11, attr=0x8000000000000001, range=[0x00000000fed01000-0x00000000fed02000) (0MB)
62[ 0.000000] efi: mem30: type=11, attr=0x8000000000000001, range=[0x00000000fed08000-0x00000000fed09000) (0MB)
63[ 0.000000] efi: mem31: type=11, attr=0x8000000000000001, range=[0x00000000ffae0000-0x0000000100000000) (5MB)
64[ 0.000000] SMBIOS 2.8 present.
65[ 0.000000] DMI: TECLAST X89 Kindow/tPAD, BIOS 5.6.5 03/25/2016
66[ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
67[ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
68[ 0.000000] e820: last_pfn = 0x7cd00 max_arch_pfn = 0x400000000
69[ 0.000000] MTRR default type: uncachable
70[ 0.000000] MTRR fixed ranges enabled:
71[ 0.000000] 00000-9FFFF write-back
72[ 0.000000] A0000-FFFFF write-protect
73[ 0.000000] MTRR variable ranges enabled:
74[ 0.000000] 0 base 000000000 mask F80000000 write-back
75[ 0.000000] 1 base 07E000000 mask FFE000000 uncachable
76[ 0.000000] 2 base 07D000000 mask FFF000000 uncachable
77[ 0.000000] 3 base 07CE00000 mask FFFE00000 uncachable
78[ 0.000000] 4 base 07CE00000 mask FFFE00000 uncachable
79[ 0.000000] 5 base 07CD00000 mask FFFF00000 uncachable
80[ 0.000000] 6 disabled
81[ 0.000000] 7 disabled
82[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
83[ 0.000000] original variable MTRRs
84[ 0.000000] reg 0, base: 0GB, range: 2GB, type WB
85[ 0.000000] reg 1, base: 2016MB, range: 32MB, type UC
86[ 0.000000] reg 2, base: 2000MB, range: 16MB, type UC
87[ 0.000000] reg 3, base: 1998MB, range: 2MB, type UC
88[ 0.000000] reg 4, base: 1998MB, range: 2MB, type UC
89[ 0.000000] reg 5, base: 1997MB, range: 1MB, type UC
90[ 0.000000] total RAM covered: 1997M
91[ 0.000000] Found optimal setting for mtrr clean up
92[ 0.000000] gran_size: 64K chunk_size: 64M num_reg: 5 lose cover RAM: 0G
93[ 0.000000] New variable MTRRs
94[ 0.000000] reg 0, base: 0GB, range: 2GB, type WB
95[ 0.000000] reg 1, base: 1997MB, range: 1MB, type UC
96[ 0.000000] reg 2, base: 1998MB, range: 2MB, type UC
97[ 0.000000] reg 3, base: 2000MB, range: 16MB, type UC
98[ 0.000000] reg 4, base: 2016MB, range: 32MB, type UC
99[ 0.000000] Base memory trampoline at [ffff880000098000] 98000 size 24576
100[ 0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff]
101[ 0.000000] [mem 0x00000000-0x000fffff] page 4k
102[ 0.000000] BRK [0x0348f000, 0x0348ffff] PGTABLE
103[ 0.000000] BRK [0x03490000, 0x03490fff] PGTABLE
104[ 0.000000] BRK [0x03491000, 0x03491fff] PGTABLE
105[ 0.000000] init_memory_mapping: [mem 0x79200000-0x793fffff]
106[ 0.000000] [mem 0x79200000-0x793fffff] page 2M
107[ 0.000000] BRK [0x03492000, 0x03492fff] PGTABLE
108[ 0.000000] init_memory_mapping: [mem 0x78000000-0x791fffff]
109[ 0.000000] [mem 0x78000000-0x791fffff] page 2M
110[ 0.000000] init_memory_mapping: [mem 0x00100000-0x1fffffff]
111[ 0.000000] [mem 0x00100000-0x001fffff] page 4k
112[ 0.000000] [mem 0x00200000-0x1fffffff] page 2M
113[ 0.000000] init_memory_mapping: [mem 0x20200000-0x77ffffff]
114[ 0.000000] [mem 0x20200000-0x77ffffff] page 2M
115[ 0.000000] init_memory_mapping: [mem 0x79400000-0x7967efff]
116[ 0.000000] [mem 0x79400000-0x795fffff] page 2M
117[ 0.000000] [mem 0x79600000-0x7967efff] page 4k
118[ 0.000000] BRK [0x03493000, 0x03493fff] PGTABLE
119[ 0.000000] init_memory_mapping: [mem 0x7c5ed000-0x7c5f7fff]
120[ 0.000000] [mem 0x7c5ed000-0x7c5f7fff] page 4k
121[ 0.000000] BRK [0x03494000, 0x03494fff] PGTABLE
122[ 0.000000] init_memory_mapping: [mem 0x7c5f9000-0x7ccfffff]
123[ 0.000000] [mem 0x7c5f9000-0x7c5fffff] page 4k
124[ 0.000000] [mem 0x7c600000-0x7cbfffff] page 2M
125[ 0.000000] [mem 0x7cc00000-0x7ccfffff] page 4k
126[ 0.000000] ACPI: RSDP 000000007bd1b014 00024 (v02 ALASKA)
127[ 0.000000] ACPI: XSDT 000000007bd1a100 000B4 (v01 ALASKA A M I 00000003 MSFT 0100000D)
128[ 0.000000] ACPI: FACP 000000007bd16000 0010C (v05 ALASKA A M I 00000003 AMI 0100000D)
129[ 0.000000] ACPI: DSDT 000000007bd01000 103C3 (v02 ALASKA A M I 00000003 AMI 0100000D)
130[ 0.000000] ACPI: FACS 000000007be88000 00040
131[ 0.000000] ACPI: MSDM 000000007bd19000 00055 (v03 ALASKA A M I 01072009 AMI 00010013)
132[ 0.000000] ACPI: UEFI 000000007c3ad000 00042 (v01 ALASKA A M I 00000000 00000000)
133[ 0.000000] ACPI: OEM0 000000007bd18000 00084 (v05 ALASKA BATTERY 00000003 AMI 0100000D)
134[ 0.000000] ACPI: DBG2 000000007bd17000 00072 (v00 ALASKA INTLDBG2 00000003 AMI 0100000D)
135[ 0.000000] ACPI: HPET 000000007bd15000 00038 (v01 ALASKA A M I 00000003 AMI 0100000D)
136[ 0.000000] ACPI: LPIT 000000007bd14000 00104 (v01 ALASKA A M I 00000003 AMI 0100000D)
137[ 0.000000] ACPI: APIC 000000007bd13000 0006C (v03 ALASKA A M I 00000003 AMI 0100000D)
138[ 0.000000] ACPI: MCFG 000000007bd12000 0003C (v01 ALASKA A M I 00000003 AMI 0100000D)
139[ 0.000000] ACPI: FPDT 000000007bcfa000 00044 (v01 ALASKA A M I 01072009 AMI 00010013)
140[ 0.000000] ACPI: SSDT 000000007bcf9000 00763 (v01 PmRef CpuPm 00003000 INTL 20061109)
141[ 0.000000] ACPI: SSDT 000000007bcf8000 00290 (v01 PmRef Cpu0Tst 00003000 INTL 20061109)
142[ 0.000000] ACPI: SSDT 000000007bcf7000 0017A (v01 PmRef ApTst 00003000 INTL 20061109)
143[ 0.000000] ACPI: EM_1 000000007bcf6000 00029 (v00 ALASKA A M I 00000005 INTL 0100000D)
144[ 0.000000] ACPI: OEM1 000000007bcf5000 00040 (v01 ALASKA A M I 00000005 INTL 0100000D)
145[ 0.000000] ACPI: PIDV 000000007bcf4000 000DC (v02 ALASKA A M I 00000002 00000000)
146[ 0.000000] ACPI: RSCI 000000007bcf3000 0002C (v00 ALASKA A M I 00000000 00000000)
147[ 0.000000] ACPI: CSRT 000000007bd00000 0014C (v00 ALASKA A M I 00000005 INTL 20120624)
148[ 0.000000] ACPI: Local APIC address 0xfee00000
149[ 0.000000] [ffffea0000000000-ffffea0001ffffff] PMD -> [ffff880073c00000-ffff880075bfffff] on node 0
150[ 0.000000] Zone ranges:
151[ 0.000000] DMA [mem 0x00001000-0x00ffffff]
152[ 0.000000] DMA32 [mem 0x01000000-0xffffffff]
153[ 0.000000] Normal empty
154[ 0.000000] Movable zone start for each node
155[ 0.000000] Early memory node ranges
156[ 0.000000] node 0: [mem 0x00001000-0x0008efff]
157[ 0.000000] node 0: [mem 0x00090000-0x0009dfff]
158[ 0.000000] node 0: [mem 0x00100000-0x1fffffff]
159[ 0.000000] node 0: [mem 0x20200000-0x7967efff]
160[ 0.000000] node 0: [mem 0x7c5ed000-0x7c5f7fff]
161[ 0.000000] node 0: [mem 0x7c5f9000-0x7ccfffff]
162[ 0.000000] On node 0 totalpages: 498477
163[ 0.000000] DMA zone: 64 pages used for memmap
164[ 0.000000] DMA zone: 22 pages reserved
165[ 0.000000] DMA zone: 3996 pages, LIFO batch:0
166[ 0.000000] DMA32 zone: 7924 pages used for memmap
167[ 0.000000] DMA32 zone: 494481 pages, LIFO batch:31
168[ 0.000000] Will Disable HPET for this platform
169[ 0.000000] ACPI: PM-Timer IO Port: 0x408
170[ 0.000000] ACPI: Local APIC address 0xfee00000
171[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
172[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled)
173[ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x04] enabled)
174[ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x06] enabled)
175[ 0.000000] ACPI: IOAPIC (id[0x08] address[0xfec00000] gsi_base[0])
176[ 0.000000] IOAPIC[0]: apic_id 8, version 32, address 0xfec00000, GSI 0-86
177[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
178[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
179[ 0.000000] ACPI: IRQ0 used by override.
180[ 0.000000] ACPI: IRQ2 used by override.
181[ 0.000000] ACPI: IRQ9 used by override.
182[ 0.000000] Using ACPI (MADT) for SMP configuration information
183[ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
184[ 0.000000] smpboot: Allowing 4 CPUs, 0 hotplug CPUs
185[ 0.000000] nr_irqs_gsi: 103
186[ 0.000000] intel_mid_pstore_ram: reserved RAM buffer (0x219000@0xfde7000)
187[ 0.000000] e820: [mem 0x7cd00000-0xe00f7fff] available for PCI devices
188[ 0.000000] setup_percpu: NR_CPUS:4 nr_cpumask_bits:4 nr_cpu_ids:4 nr_node_ids:1
189[ 0.000000] PERCPU: Embedded 28 pages/cpu @ffff880079200000 s81984 r8192 d24512 u524288
190[ 0.000000] pcpu-alloc: s81984 r8192 d24512 u524288 alloc=1*2097152
191[ 0.000000] pcpu-alloc: [0] 0 1 2 3
192[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 490467
193[ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.10.20 nosplash rootdelay=15 root=/dev/sda2 rw earlyprintk=nologger ptrace.ptrace_can_access=1 nmi_watchdog=panic softlockup_panic=1 loglevel=4 androidboot.bootmedia=sdcard androidboot.hardware=inet_w_32 androidboot.spid=xxxx:xxxx:xxxx:xxxx:xxxx:xxxx androidboot.serialno=01234567890123456789 oops=panic panic=50 vmalloc=172M slub_max_order=2 vga=current i915.modeset=0 drm.vblankoffdelay=1 acpi_backlight=vendor netconsole=4444@192.168.1.30/eth1,514@192.168.1.24,24:EC:99:45:7C:12 8723bs.blacklist=true
194[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
195[ 0.000000] Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes)
196[ 0.000000] Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes)
197[ 0.000000] Memory: 1880788k/2044928k available (9648k kernel code, 51020k absent, 113120k reserved, 8713k data, 1252k init)
198[ 0.000000] SLUB: HWalign=64, Order=0-2, MinObjects=0, CPUs=4, Nodes=1
199[ 0.000000] Preemptible hierarchical RCU implementation.
200[ 0.000000] CONFIG_RCU_FANOUT set to non-default value of 32
201[ 0.000000] Additional per-CPU info printed with stalls.
202[ 0.000000] Experimental no-CBs for all CPUs
203[ 0.000000] Experimental no-CBs CPUs: 0-3.
204[ 0.000000] NO_HZ: Full dynticks CPUs: 1-3.
205[ 0.000000] NR_IRQS:4352 nr_irqs:1024 16
206[ 0.000000] Console: colour dummy device 80x25
207[ 0.000000] console [tty0] enabled
208[ 0.000000] logger: created 256K log 'log_kern_bot'
209[ 0.000000] logger: register logcat console
210[ 0.000000] kmemleak: Kernel memory leak detector disabled
211[ 0.000000] tsc: Fast TSC calibration using PIT
212[ 0.000000] tsc: Detected 1333.441 MHz processor
213[ 0.000012] Calibrating delay loop (skipped), value calculated using timer frequency.. 2666.88 BogoMIPS (lpj=13334410)
214[ 0.000037] pid_max: default: 32768 minimum: 301
215[ 0.000122] init_memory_mapping: [mem 0x7c3f2000-0x7c4f5fff]
216[ 0.000142] [mem 0x7c3f2000-0x7c4f5fff] page 4k
217[ 0.000214] init_memory_mapping: [mem 0x7c4f6000-0x7c5ecfff]
218[ 0.000233] [mem 0x7c4f6000-0x7c5ecfff] page 4k
219[ 0.000287] init_memory_mapping: [mem 0x7c5f8000-0x7c5f8fff]
220[ 0.000304] [mem 0x7c5f8000-0x7c5f8fff] page 4k
221[ 0.005029] Security Framework initialized
222[ 0.005135] Mount-cache hash table entries: 256
223[ 0.006348] Initializing cgroup subsys devices
224[ 0.006376] Initializing cgroup subsys freezer
225[ 0.006396] Initializing cgroup subsys blkio
226[ 0.006413] Initializing cgroup subsys perf_event
227[ 0.006582] CPU: Physical Processor ID: 0
228[ 0.006599] CPU: Processor Core ID: 0
229[ 0.006619] ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
230 ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8)
231[ 0.012264] mce: CPU supports 6 MCE banks
232[ 0.012296] CPU0: Thermal monitoring enabled (TM1)
233[ 0.012328] Last level iTLB entries: 4KB 0, 2MB 0, 4MB 0
234 Last level dTLB entries: 4KB 128, 2MB 0, 4MB 0
235 tlb_flushall_shift: 6
236[ 0.012945] Freeing SMP alternatives: 28k freed
237[ 0.012991] ACPI: Core revision 20130517
238[ 0.103099] ACPI: All ACPI Tables successfully acquired
239[ 0.118131] ftrace: allocating 35586 entries in 140 pages
240[ 0.213456] smpboot: CPU0: Intel(R) Atom(TM) CPU Z3735F @ 1.33GHz (fam: 06, model: 37, stepping: 08)
241[ 0.213529] TSC deadline timer enabled
242[ 0.213595] Performance Events: no PEBS fmt2+, generic architected perfmon, Intel PMU driver.
243[ 0.213647] ... version: 3
244[ 0.213663] ... bit width: 40
245[ 0.213677] ... generic registers: 2
246[ 0.213692] ... value mask: 000000ffffffffff
247[ 0.213706] ... max period: 000000007fffffff
248[ 0.213720] ... fixed-purpose events: 3
249[ 0.213734] ... event mask: 0000000700000003
250[ 0.255671] ftrace: Allocated trace_printk buffers
251[ 0.322455] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
252[ 0.305151] smpboot: Booting Node 0, Processors #1 #2 #3 OK
253[ 0.382091] Skipped synchronization checks as TSC is reliable.
254[ 0.382311] Brought up 4 CPUs
255[ 0.382336] smpboot: Total of 4 processors activated (10667.52 BogoMIPS)
256[ 0.385578] devtmpfs: initialized
257[ 0.388734] PM: Registering ACPI NVS region [mem 0x0008f000-0x0008ffff] (4096 bytes)
258[ 0.388760] PM: Registering ACPI NVS region [mem 0x7bd1c000-0x7c3f1fff] (7168000 bytes)
259[ 0.397993] xor: measuring software checksum speed
260[ 0.494252] prefetch64-sse: 1610.400 MB/sec
261[ 0.594397] generic_sse: 1476.400 MB/sec
262[ 0.594417] xor: using function: prefetch64-sse (1610.400 MB/sec)
263[ 0.594988] regulator-dummy: no parameters
264[ 0.595168] RTC time: 17:44:34, date: 09/13/16
265[ 0.595542] NET: Registered protocol family 16
266[ 0.598063] SPID updated according to ACPI Table:
267[ 0.598098] spid customer id : 0000
268 spid vendor id : 0000
269 spid manufacturer id : 0000
270 spid platform family id : 0007
271 spid product line id : 0000
272 spid hardware id : 0007
273 spid fru[4..0] : 00 00 00 00 00
274 spid fru[9..5] : 00 00 00 00 00
275 ssn : Baytrail00006B89
276[ 0.598460] ACPI: bus type PCI registered
277[ 0.599017] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
278[ 0.599043] PCI: not using MMCONFIG
279[ 0.599062] PCI: Using configuration type 1 for base access
280[ 0.619950] bio: create slab <bio-0> at 0
281[ 0.784766] raid6: sse2x1 294 MB/s
282[ 0.955078] raid6: sse2x2 350 MB/s
283[ 1.125285] raid6: sse2x4 626 MB/s
284[ 1.125305] raid6: using algorithm sse2x4 (626 MB/s)
285[ 1.125322] raid6: using ssse3x2 recovery algorithm
286[ 1.125792] ACPI: Added _OSI(Module Device)
287[ 1.125820] ACPI: Added _OSI(Processor Device)
288[ 1.125840] ACPI: Added _OSI(3.0 _SCP Extensions)
289[ 1.125861] ACPI: Added _OSI(Processor Aggregator Device)
290[ 1.162557] ACPI: EC: Look up EC in DSDT
291[ 1.288004] ACPI: SSDT 000000007bce7598 00501 (v01 PmRef Cpu0Ist 00003000 INTL 20061109)
292[ 1.297576] ACPI: Dynamic OEM Table Load:
293[ 1.297612] ACPI: SSDT (null) 00501 (v01 PmRef Cpu0Ist 00003000 INTL 20061109)
294[ 1.298707] ACPI: SSDT 000000007bce6918 00433 (v01 PmRef Cpu0Cst 00003001 INTL 20061109)
295[ 1.308212] ACPI: Dynamic OEM Table Load:
296[ 1.308247] ACPI: SSDT (null) 00433 (v01 PmRef Cpu0Cst 00003001 INTL 20061109)
297[ 1.348668] ACPI: SSDT 000000007bce9e18 0015F (v01 PmRef ApIst 00003000 INTL 20061109)
298[ 1.358418] ACPI: Dynamic OEM Table Load:
299[ 1.358453] ACPI: SSDT (null) 0015F (v01 PmRef ApIst 00003000 INTL 20061109)
300[ 1.374312] ACPI: SSDT 000000007bce8f18 0008D (v01 PmRef ApCst 00003000 INTL 20061109)
301[ 1.383868] ACPI: Dynamic OEM Table Load:
302[ 1.383903] ACPI: SSDT (null) 0008D (v01 PmRef ApCst 00003000 INTL 20061109)
303[ 1.416396] ACPI: Interpreter enabled
304[ 1.416449] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20130517/hwxface-568)
305[ 1.416503] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20130517/hwxface-568)
306[ 1.416551] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S3_] (20130517/hwxface-568)
307[ 1.416635] ACPI: (supports S0 S5)
308[ 1.416655] ACPI: Using IOAPIC for interrupt routing
309[ 1.416883] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
310[ 1.468673] [Firmware Info]: PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] not reserved in ACPI motherboard resources
311[ 1.468699] PCI: not using MMCONFIG
312[ 1.468810] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
313[ 1.493845] ACPI: Power Resource [USBC] (on)
314[ 1.526959] ACPI: Power Resource [WWPR] (off)
315[ 1.563423] ACPI: Power Resource [PLPE] (on)
316[ 1.605481] ACPI: Power Resource [CLK0] (on)
317[ 1.605909] ACPI: Power Resource [CLK1] (on)
318[ 1.610143] ACPI: Power Resource [P28X] (off)
319[ 1.610574] ACPI: Power Resource [P18X] (off)
320[ 1.613995] ACPI: Power Resource [P28P] (off)
321[ 1.614408] ACPI: Power Resource [P18P] (off)
322[ 1.640311] ACPI: Power Resource [P28T] (off)
323[ 1.640770] ACPI: Power Resource [P18T] (off)
324[ 1.641212] ACPI: Power Resource [P1XT] (off)
325[ 1.651293] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
326[ 1.651808] \_SB_.PCI0:_OSC invalid UUID
327[ 1.651829] _OSC request data:1 8 0
328[ 1.654420] acpi PNP0A08:00: fail to add MMCONFIG information, can't access extended PCI configuration space under this bridge.
329[ 1.654706] PCI host bridge to bus 0000:00
330[ 1.654740] pci_bus 0000:00: root bus resource [bus 00-ff]
331[ 1.654765] pci_bus 0000:00: root bus resource [io 0x0000-0x006f]
332[ 1.654788] pci_bus 0000:00: root bus resource [io 0x0078-0x0cf7]
333[ 1.654810] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff]
334[ 1.654833] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
335[ 1.654855] pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000dffff]
336[ 1.654877] pci_bus 0000:00: root bus resource [mem 0x000e0000-0x000fffff]
337[ 1.654899] pci_bus 0000:00: root bus resource [mem 0x7d000001-0x7f000000]
338[ 1.654922] pci_bus 0000:00: root bus resource [mem 0x80000000-0x90effffe]
339[ 1.654944] pci_bus 0000:00: root bus resource [mem 0xfed40000-0xfed40fff]
340[ 1.654999] pci 0000:00:00.0: [8086:0f00] type 00 class 0x060000
341[ 1.655974] pci 0000:00:02.0: [8086:0f31] type 00 class 0x030000
342[ 1.656051] pci 0000:00:02.0: reg 10: [mem 0x90400000-0x907fffff]
343[ 1.656113] pci 0000:00:02.0: reg 18: [mem 0x80000000-0x8fffffff pref]
344[ 1.656171] pci 0000:00:02.0: reg 20: [io 0x1000-0x1007]
345[ 1.657197] pci 0000:00:03.0: [8086:0f38] type 00 class 0x048000
346[ 1.657267] pci 0000:00:03.0: reg 10: [mem 0x90000000-0x903fffff]
347[ 1.658302] pci 0000:00:14.0: [8086:0f35] type 00 class 0x0c0330
348[ 1.658390] pci 0000:00:14.0: reg 10: [mem 0x90e00000-0x90e0ffff 64bit]
349[ 1.658607] pci 0000:00:14.0: PME# supported from D3hot D3cold
350[ 1.659509] pci 0000:00:16.0: [8086:0f37] type 00 class 0x0c0380
351[ 1.659547] EM:OEM1 table found, size=64
352[ 1.659564] OEM1 charging bit = 1
353[ 1.659618] pci 0000:00:16.0: reg 10: [mem 0x90800000-0x909fffff]
354[ 1.659662] pci 0000:00:16.0: reg 14: [mem 0x90e2e000-0x90e2efff]
355[ 1.659855] pci 0000:00:16.0: PME# supported from D0 D3hot
356[ 1.660731] pci 0000:00:1a.0: [8086:0f18] type 00 class 0x108000
357[ 1.660816] pci 0000:00:1a.0: reg 10: [mem 0x90d00000-0x90dfffff]
358[ 1.660865] pci 0000:00:1a.0: reg 14: [mem 0x90c00000-0x90cfffff]
359[ 1.661130] pci 0000:00:1a.0: PME# supported from D0 D3hot
360[ 1.662037] pci 0000:00:1f.0: [8086:0f1c] type 00 class 0x060100
361[ 1.663107] pci_bus 0000:00: on NUMA node 0
362[ 1.663629] \_SB_.PCI0:_OSC invalid UUID
363[ 1.663650] _OSC request data:1 18 0
364[ 1.663701] acpi PNP0A08:00: ACPI _OSC support notification failed, disabling PCIe ASPM
365[ 1.663723] acpi PNP0A08:00: Unable to request _OSC control (_OSC support mask: 0x08)
366[ 1.668576] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
367[ 1.669387] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
368[ 1.670196] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
369[ 1.671000] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
370[ 1.671805] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
371[ 1.672609] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
372[ 1.673413] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
373[ 1.674228] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
374[ 1.709899] acpi root: \_SB_.PCI0 notify handler is installed
375[ 1.710951] Found 1 acpi root devices
376[ 1.711685] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
377[ 1.711714] vgaarb: loaded
378[ 1.711730] vgaarb: bridge control possible 0000:00:02.0
379[ 1.712678] SCSI subsystem initialized
380[ 1.712891] ACPI: bus type USB registered
381[ 1.713097] usbcore: registered new interface driver usbfs
382[ 1.713210] usbcore: registered new interface driver hub
383[ 1.713492] usbcore: registered new device driver usb
384[ 1.713803] media: Linux media interface: v0.10
385[ 1.713943] Linux video capture interface: v2.00
386[ 1.714027] pps_core: LinuxPPS API ver. 1 registered
387[ 1.714046] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
388[ 1.714092] PTP clock support registered
389[ 1.715345] Advanced Linux Sound Architecture Driver Initialized.
390[ 1.715367] PCI: Using ACPI for IRQ routing
391[ 1.715388] PCI: pci_cache_line_size set to 64 bytes
392[ 1.715487] e820: reserve RAM buffer [mem 0x0008f000-0x0008ffff]
393[ 1.715510] e820: reserve RAM buffer [mem 0x0009e000-0x0009ffff]
394[ 1.715531] e820: reserve RAM buffer [mem 0x7967f000-0x7bffffff]
395[ 1.715551] e820: reserve RAM buffer [mem 0x7c5f8000-0x7fffffff]
396[ 1.715572] e820: reserve RAM buffer [mem 0x7cd00000-0x7fffffff]
397[ 1.716420] Bluetooth: Core ver 2.16
398[ 1.716503] NET: Registered protocol family 31
399[ 1.716522] Bluetooth: HCI device and connection manager initialized
400[ 1.716555] Bluetooth: HCI socket layer initialized
401[ 1.716587] Bluetooth: L2CAP socket layer initialized
402[ 1.716656] Bluetooth: SCO socket layer initialized
403[ 1.716971] nfc: nfc_init: NFC Core ver 0.1
404[ 1.717094] NET: Registered protocol family 39
405[ 1.717945] hsu core clock 100 M
406[ 1.717962] VLV2: fix up PCI interrupt routing
407[ 1.717990] Switching to clocksource refined-jiffies
408[ 1.795961] pnp: PnP ACPI init
409[ 1.796067] ACPI: bus type PNP registered
410[ 1.796420] pnp 00:00: Plug and Play ACPI device, IDs PNP0b00 (active)
411[ 1.796968] pnp 00:01: Plug and Play ACPI device, IDs PNP0103 (active)
412[ 1.797684] pnp 00:02: Plug and Play ACPI device, IDs INT0800 (active)
413[ 1.798090] system 00:03: [io 0x0680-0x069f] has been reserved
414[ 1.798123] system 00:03: [io 0x0400-0x047f] has been reserved
415[ 1.798150] system 00:03: [io 0x0500-0x05fe] has been reserved
416[ 1.798176] system 00:03: [io 0x0600-0x061f] has been reserved
417[ 1.798203] system 00:03: [io 0x164e-0x164f] has been reserved
418[ 1.798242] system 00:03: Plug and Play ACPI device, IDs PNP0c02 (active)
419[ 1.799149] pnp 00:04: Plug and Play ACPI device, IDs PNP0501 (active)
420[ 1.834017] vlv_gpio 00:05: \_SB.GPO0: gpio base 0
421[ 1.834073] vlv_gpio 00:05: Plug and Play ACPI device, IDs INT33fc (active)
422[ 1.843479] vlv_gpio 00:06: \_SB.GPO1: gpio base 102
423[ 1.843531] vlv_gpio 00:06: Plug and Play ACPI device, IDs INT33fc (active)
424[ 1.857791] vlv_gpio 00:07: \_SB.GPO2: gpio base 130
425[ 1.857845] vlv_gpio 00:07: Plug and Play ACPI device, IDs INT33fc (active)
426[ 1.863335] pnp 00:08: Plug and Play ACPI device, IDs SMB0349 (active)
427[ 1.865381] pnp 00:09: Plug and Play ACPI device, IDs INT5648 (active)
428[ 1.866479] pnp 00:0a: Plug and Play ACPI device, IDs INT33f8 (active)
429[ 1.867648] pnp 00:0b: Plug and Play ACPI device, IDs INTcf1c (active)
430[ 1.870871] pnp 00:0c: Plug and Play ACPI device, IDs PNP0c50 (active)
431[ 1.871948] pnp 00:0d: Plug and Play ACPI device, IDs INT33f4 (active)
432[ 1.873209] pnp 00:0e: Plug and Play ACPI device, IDs INT33fe (active)
433[ 1.874631] pnp 00:0f: Plug and Play ACPI device, IDs INTcfd9 PNP0c40 (active)
434[ 1.875108] pnp 00:10: Plug and Play ACPI device, IDs INT33bd (active)
435[ 1.875393] pnp: PnP ACPI: found 17 devices
436[ 1.875415] ACPI: bus type PNP unregistered
437[ 1.901256] Switching to clocksource acpi_pm
438[ 1.902042] pci_bus 0000:00: resource 4 [io 0x0000-0x006f]
439[ 1.902071] pci_bus 0000:00: resource 5 [io 0x0078-0x0cf7]
440[ 1.902094] pci_bus 0000:00: resource 6 [io 0x0d00-0xffff]
441[ 1.902118] pci_bus 0000:00: resource 7 [mem 0x000a0000-0x000bffff]
442[ 1.902140] pci_bus 0000:00: resource 8 [mem 0x000c0000-0x000dffff]
443[ 1.902162] pci_bus 0000:00: resource 9 [mem 0x000e0000-0x000fffff]
444[ 1.902185] pci_bus 0000:00: resource 10 [mem 0x7d000001-0x7f000000]
445[ 1.902207] pci_bus 0000:00: resource 11 [mem 0x80000000-0x90effffe]
446[ 1.902229] pci_bus 0000:00: resource 12 [mem 0xfed40000-0xfed40fff]
447[ 1.902456] NET: Registered protocol family 2
448[ 1.903679] TCP established hash table entries: 16384 (order: 6, 262144 bytes)
449[ 1.904033] TCP bind hash table entries: 16384 (order: 7, 524288 bytes)
450[ 1.904627] TCP: Hash tables configured (established 16384 bind 16384)
451[ 1.904767] TCP: reno registered
452[ 1.904828] UDP hash table entries: 1024 (order: 4, 98304 bytes)
453[ 1.904952] UDP-Lite hash table entries: 1024 (order: 4, 98304 bytes)
454[ 1.905520] NET: Registered protocol family 1
455[ 1.905625] pci 0000:00:02.0: Boot video device
456[ 1.961615] pci 0000:00:14.0: power state changed by ACPI to D0
457[ 1.962459] PCI: CLS 0 bytes, default 64
458[ 1.963454] platform RTL8723:00: wlan-enable GPIO 150 found
459[ 1.963895] wlan_en_acpi: 1800 mV
460[ 1.970958] intel_bytcr_bcntl 1-0023: I2C SMbus Read error:-121
461[ 1.971006] intel_bytcr_bcntl 1-0023: bcntl init failed
462[ 1.984925] i2c_designware 80860F41:04: _SEM=1
463[ 1.984953] i2c_designware 80860F41:04: Share controller with PUNIT
464[ 1.991204] Dollar Cove: IC_TYPE 0x51
465[ 2.088981] intel_mid_i2c_pmic 5-0034: PMIC IRQ Base:456
466[ 2.106746] AVX or AES-NI instructions are not detected.
467[ 2.106770] AVX instructions are not detected.
468[ 2.106786] AVX instructions are not detected.
469[ 2.106800] AVX instructions are not detected.
470[ 2.106814] AVX instructions are not detected.
471[ 2.106827] AVX2 or AES-NI instructions are not detected.
472[ 2.106841] AVX2 instructions are not detected.
473[ 2.110714] console [pstore-1] enabled
474[ 2.110787] ramoops: attached 0x219000@0xfde7000, ecc: 0/0
475[ 2.111824] Regulator Devices Found for BYTCRv2.1 (XPR)
476[ 2.112622] vlv2_plat_clk vlv2_plat_clk: vlv2_plat_clk initialized
477[ 2.112800] camera pdata: I2C bus = 2, name = ov2685, irq = 0x 0, addr = 0x3c
478[ 2.112827] camera pdata: I2C bus = 2, name = ov2685f, irq = 0x 0, addr = 0x3c
479[ 2.112850] camera pdata: I2C bus = 2, name = ov7736, irq = 0x 0, addr = 0x3c
480[ 2.112871] camera pdata: I2C bus = 2, name = ov5670, irq = 0x 0, addr = 0x3c
481[ 2.112892] camera pdata: I2C bus = 2, name = ov5693, irq = 0x 0, addr = 0x36
482[ 2.112913] camera pdata: I2C bus = 2, name = ov2722, irq = 0x 0, addr = 0x36
483[ 2.112934] camera pdata: I2C bus = 2, name = gc2155, irq = 0x 0, addr = 0x3c
484[ 2.112955] camera pdata: I2C bus = 2, name = gc0310soc, irq = 0x 0, addr = 0x21
485[ 2.112983] camera pdata: I2C bus = 2, name = gc2235f, irq = 0x 0, addr = 0x3c
486[ 2.113005] camera pdata: I2C bus = 2, name = gc5004, irq = 0x 0, addr = 0x36
487[ 2.113025] camera pdata: I2C bus = 2, name = ov5648, irq = 0x 0, addr = 0x36
488[ 2.113046] camera pdata: I2C bus = 2, name = ov2680b, irq = 0x 0, addr = 0x36
489[ 2.113071] camera pdata: I2C bus = 2, name = gc0339, irq = 0x 0, addr = 0x21
490[ 2.113092] camera pdata: I2C bus = 2, name = ov2680f, irq = 0x 0, addr = 0x10
491[ 2.303910] squashfs: version 4.0 (2009/01/31) Phillip Lougher
492[ 2.305567] fuse init (API version 7.22)
493[ 2.307529] bio: create slab <bio-1> at 1
494[ 2.309025] Btrfs loaded
495[ 2.309104] msgmni has been set to 3777
496[ 2.314840] Key type asymmetric registered
497[ 2.314867] Asymmetric key parser 'x509' registered
498[ 2.315165] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 248)
499[ 2.315192] io scheduler noop registered
500[ 2.315213] io scheduler deadline registered
501[ 2.315459] io scheduler cfq registered (default)
502[ 2.315781] virtual_gpio INT0002:00: virtual gpio pin = 2
503[ 2.316615] efifb: probing for efifb
504[ 2.320776] efifb: framebuffer at 0x80000000, mapped to 0xffffc90000880000, using 6144k, total 6144k
505[ 2.320801] efifb: mode is 1080x1440x32, linelength=4352, pages=1
506[ 2.320818] efifb: scrolling: redraw
507[ 2.320841] efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0
508[ 2.358980] Console: switching to colour frame buffer device 135x90
509[ 2.394965] fb0: EFI VGA frame buffer device
510[ 2.395033] intel_idle: MWAIT substates: 0x33000020
511[ 2.395057] intel_idle: v0.4 model 0x37
512[ 2.395076] intel_idle: lapic_timer_reliable_states 0xffffffff
513[ 2.395834] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0
514[ 2.395879] ACPI: Power Button [PWRF]
515[ 2.396453] ACPI: Requesting acpi_cpufreq
516[ 2.473906] intel_mid_dma_acpi: dma_acpi_probe for ADMA0F28
517[ 2.475272] intel_mid_dma_acpi: dma_acpi_probe for INTL9C60
518[ 2.476857] intel_mid_dma_acpi: dma_acpi_probe for INTL9C60
519[ 2.481568] LDO_2: 1800 <--> 3300 mV at 2900 mV normal
520[ 2.488623] GPIO_1: 1800 <--> 3300 mV at 3300 mV normal
521[ 2.492647] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
522[ 2.513313] 00:04: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
523[ 2.516239] Non-volatile memory driver v1.3
524[ 2.516444] Linux agpgart interface v0.103
525[ 2.516657] [drm] Initialized drm 1.1.0 20060810
526[ 2.530972] brd: module loaded
527[ 2.538430] loop: module loaded
528[ 2.539115] mei_txe 0000:00:1a.0: setting latency timer to 64
529[ 2.549659] mei_txe 0000:00:1a.0: irq 103 for MSI/MSI-X
530[ 2.595325] misc memnotify: update period set to 250 ms or 25 jiffies
531[ 2.595361] misc memnotify: update period limit set to 15000 ms or 1500 jiffies
532[ 2.595388] misc memnotify: update space set to 0 kb or -+3777 pages
533[ 2.595414] misc memnotify: 483548 available pages found (483548 ram + 0 swap)
534[ 2.595444] misc memnotify: 3596 used pages, utilization 0 percents
535[ 2.595470] misc memnotify: 0 active pages, utilization 0 percents
536[ 2.595495] misc memnotify: 483548 total pages, utilization 100 percents
537[ 2.595519] misc memnotify: 0 swap_total pages, utilization 0 percents
538[ 2.595543] misc memnotify: 0 swap_free pages, utilization 0 percents
539[ 2.595567] misc memnotify: overhead per client connection is 72 bytes
540[ 2.596061] tun: Universal TUN/TAP device driver, 1.6
541[ 2.596085] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
542[ 2.596467] PPP generic driver version 2.4.2
543[ 2.596836] PPP BSD Compression module registered
544[ 2.596860] PPP Deflate Compression module registered
545[ 2.596898] PPP MPPE Compression module registered
546[ 2.596920] NET: Registered protocol family 24
547[ 2.597090] usbcore: registered new interface driver asix
548[ 2.597183] usbcore: registered new interface driver cdc_ether
549[ 2.597273] usbcore: registered new interface driver cdc_subset
550[ 2.597419] usbcore: registered new interface driver cdc_ncm
551[ 2.597794] dwc3_otg 0000:00:16.0: setting latency timer to 64
552[ 2.600418] dwc3_otg 0000:00:16.0: USB ID detection - Enabled - GPIO
553[ 2.600870] dwc3_otg 0000:00:16.0: ID notification (id = 0)
554[ 2.601923] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
555[ 2.601948] ehci-pci: EHCI PCI platform driver
556[ 2.602148] BYT-USH 0000:00:14.0: Don't match this driver
557[ 2.602591] xhci_hcd 0000:00:14.0: power state changed by ACPI to D0
558[ 2.602732] xhci_hcd 0000:00:14.0: setting latency timer to 64
559[ 2.602763] xhci_hcd 0000:00:14.0: xHCI Host Controller
560[ 2.602822] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 1
561[ 2.603386] xhci_hcd 0000:00:14.0: Root hub is not suspended
562[ 2.603432] xhci_hcd 0000:00:14.0: cache line size of 64 is not supported
563[ 2.603562] xhci_hcd 0000:00:14.0: irq 104 for MSI/MSI-X
564[ 2.603887] usb usb1: udev 1, busnum 1, minor = 0
565[ 2.603920] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
566[ 2.603946] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
567[ 2.603970] usb usb1: Product: xHCI Host Controller
568[ 2.603994] usb usb1: Manufacturer: Linux 3.10.20 xhci_hcd
569[ 2.604017] usb usb1: SerialNumber: 0000:00:14.0
570[ 2.604848] usb usb1: usb_probe_device
571[ 2.604885] xHCI xhci_add_endpoint called for root hub
572[ 2.604906] xHCI xhci_check_bandwidth called for root hub
573[ 2.605127] hub 1-0:1.0: usb_probe_interface
574[ 2.605157] hub 1-0:1.0: usb_probe_interface - got id
575[ 2.605193] hub 1-0:1.0: USB hub found
576[ 2.605244] hub 1-0:1.0: 6 ports detected
577[ 2.605269] hub 1-0:1.0: standalone hub
578[ 2.605292] hub 1-0:1.0: no power switching (usb 1.0)
579[ 2.605314] hub 1-0:1.0: individual port over-current protection
580[ 2.605335] hub 1-0:1.0: Single TT
581[ 2.605359] hub 1-0:1.0: TT requires at most 8 FS bit times (666 ns)
582[ 2.605382] hub 1-0:1.0: power on to power good time: 20ms
583[ 2.605433] hub 1-0:1.0: local power source is good
584[ 2.609687] usb usb1: usb port2's DeviceRemovable is changed to 1 according to platform information.
585[ 2.609720] usb usb1: usb port3's DeviceRemovable is changed to 1 according to platform information.
586[ 2.609747] usb usb1: usb port4's DeviceRemovable is changed to 1 according to platform information.
587[ 2.609771] usb usb1: usb port5's DeviceRemovable is changed to 1 according to platform information.
588[ 2.609795] usb usb1: usb port6's DeviceRemovable is changed to 1 according to platform information.
589[ 2.609820] hub 1-0:1.0: trying to enable port power on non-switchable hub
590[ 2.651586] xhci_hcd 0000:00:14.0: xHCI Host Controller
591[ 2.651642] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 2
592[ 2.651825] usb usb2: udev 1, busnum 2, minor = 128
593[ 2.651856] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003
594[ 2.651882] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
595[ 2.651905] usb usb2: Product: xHCI Host Controller
596[ 2.651928] usb usb2: Manufacturer: Linux 3.10.20 xhci_hcd
597[ 2.651951] usb usb2: SerialNumber: 0000:00:14.0
598[ 2.652715] usb usb2: usb_probe_device
599[ 2.652751] xHCI xhci_add_endpoint called for root hub
600[ 2.652772] xHCI xhci_check_bandwidth called for root hub
601[ 2.652998] hub 2-0:1.0: usb_probe_interface
602[ 2.653027] hub 2-0:1.0: usb_probe_interface - got id
603[ 2.653062] hub 2-0:1.0: USB hub found
604[ 2.653109] hub 2-0:1.0: 1 port detected
605[ 2.653134] hub 2-0:1.0: standalone hub
606[ 2.653157] hub 2-0:1.0: no power switching (usb 1.0)
607[ 2.653178] hub 2-0:1.0: individual port over-current protection
608[ 2.653202] hub 2-0:1.0: TT requires at most 8 FS bit times (666 ns)
609[ 2.653225] hub 2-0:1.0: power on to power good time: 20ms
610[ 2.653277] hub 2-0:1.0: local power source is good
611[ 2.654028] hub 2-0:1.0: trying to enable port power on non-switchable hub
612[ 2.701619] hub 1-0:1.0: state 7 ports 6 chg 0000 evt 0000
613[ 2.701714] hub 1-0:1.0: hub_suspend
614[ 2.711897] usbcore: registered new interface driver cdc_acm
615[ 2.711922] cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters
616[ 2.712093] usbcore: registered new interface driver usb-storage
617[ 2.712322] usbcore: registered new interface driver usbserial
618[ 2.712412] usbcore: registered new interface driver usbserial_generic
619[ 2.712492] usbserial: USB Serial support registered for generic
620[ 2.712594] usbcore: registered new interface driver option
621[ 2.712672] usbserial: USB Serial support registered for GSM modem (1-port)
622[ 2.712911] usbcore: registered new interface driver usb_tm
623[ 2.714629] rtc_cmos 00:00: rtc core: registered rtc_cmos as rtc0
624[ 2.714729] rtc_cmos 00:00: alarms up to one month, y3k, 242 bytes nvram
625[ 2.714825] i2c /dev entries driver
626[ 2.716460] EM:OEM0 table found, size=132
627[ 2.745667] thermal thermal_zone0: failed to read out thermal zone 0
628[ 2.751550] hub 2-0:1.0: state 7 ports 1 chg 0000 evt 0000
629[ 2.751666] hub 2-0:1.0: hub_suspend
630[ 2.751736] [xhci_pci_suspend], xhci_root_hub pointer:0x789e6800
631[ 2.791606] xhci_hcd 0000:00:14.0: power state changed by ACPI to D3cold
632[ 2.831168] EM:OEM0 table found, size=132
633[ 2.942303] process_cable_props: event:0, type:0, ma:0
634[ 2.942330] process_cable_props:Error in getting charger cable
635[ 2.942901] dwc3_otg 0000:00:16.0: [manually trigger] ID notification (id = 0)
636[ 2.942944] dollar_cove_charger dollar_cove_charger: [OTG notification]evt:2 val:0
637[ 2.943741] coretemp: Enabled Aux0/Aux1 interrupts for coretemp
638[ 2.943919] coretemp: Enabled Aux0/Aux1 interrupts for coretemp
639[ 2.944109] coretemp: Enabled Aux0/Aux1 interrupts for coretemp
640[ 2.944306] coretemp: Enabled Aux0/Aux1 interrupts for coretemp
641[ 2.946613] device-mapper: uevent: version 1.0.3
642[ 2.947328] device-mapper: ioctl: 4.24.0-ioctl (2013-01-15) initialised: dm-devel@redhat.com
643[ 2.947579] Bluetooth: HCI UART driver ver 2.2
644[ 2.947604] Bluetooth: HCI H4 protocol initialized
645[ 2.947623] Bluetooth: HCI Three-wire UART (H5) protocol initialized
646[ 2.948627] cpuidle: using governor ladder
647[ 2.949460] cpu 3: max_range = 20000, #buckets = 2000, width = 10
648[ 2.949752] cpu 2: max_range = 20000, #buckets = 2000, width = 10
649[ 2.950015] cpu 1: max_range = 20000, #buckets = 2000, width = 10
650[ 2.950271] cpu 0: max_range = 20000, #buckets = 2000, width = 10
651[ 2.950292] cpuidle: using governor menu
652[ 2.950380] sdhci: Secure Digital Host Controller Interface driver
653[ 2.950400] sdhci: Copyright(c) Pierre Ossman
654[ 2.950733] ##### Enter mmc_alloc_host, host->index=0
655[ 2.951115] mmc0: no vqmmc regulator found
656[ 2.951578] mmc0: SDHCI controller on ACPI [80860F14:00] using ADMA
657[ 2.951647] mmc0: clock 0Hz busmode 2 powermode 1 cs 0 Vdd 7 width 0 timing 0
658[ 2.952594] ##### Enter mmc_alloc_host, host->index=1
659[ 2.953482] mmc1: no vqmmc regulator found
660[ 2.954431] mmc1: SDHCI controller on ACPI [INT33BB:00] using ADMA
661[ 2.955508] ##### Enter mmc_alloc_host, host->index=2
662[ 2.967493] trigger_algo:Algo_status:2
663[ 2.968625] mmc0: clock 400000Hz busmode 2 powermode 2 cs 0 Vdd 7 width 0 timing 0
664[ 2.978870] mmc0: clock 400000Hz busmode 2 powermode 2 cs 1 Vdd 7 width 0 timing 0
665[ 2.981508] mmc0: clock 400000Hz busmode 2 powermode 2 cs 0 Vdd 7 width 0 timing 0
666[ 2.999479] mmc0: clock 400000Hz busmode 1 powermode 2 cs 0 Vdd 7 width 0 timing 0
667[ 3.000229] mmc0: clock 400000Hz busmode 1 powermode 2 cs 0 Vdd 7 width 0 timing 0
668[ 3.000570] mmc0: clock 400000Hz busmode 1 powermode 2 cs 0 Vdd 7 width 0 timing 0
669[ 3.000914] mmc0: clock 400000Hz busmode 1 powermode 2 cs 1 Vdd 7 width 0 timing 0
670[ 3.003551] mmc0: clock 400000Hz busmode 1 powermode 2 cs 0 Vdd 7 width 0 timing 0
671[ 3.018362] mmc0: clock 400000Hz busmode 2 powermode 2 cs 0 Vdd 7 width 0 timing 0
672[ 3.030834] mmc0: BKOPS_EN bit is not set
673[ 3.034007] mmc0: clock 400000Hz busmode 2 powermode 2 cs 0 Vdd 7 width 0 timing 1
674[ 3.034395] mmc0: clock 52000000Hz busmode 2 powermode 2 cs 0 Vdd 7 width 0 timing 1
675[ 3.035429] mmc0: clock 52000000Hz busmode 2 powermode 2 cs 0 Vdd 7 width 3 timing 1
676[ 3.042870] mmc2: SDHCI controller on ACPI [80860F14:01] using ADMA
677[ 3.043101] mmc0: clock 52000000Hz busmode 2 powermode 2 cs 0 Vdd 7 width 3 timing 7
678[ 3.043478] mmc0: clock 52000000Hz busmode 2 powermode 2 cs 0 Vdd 7 width 3 timing 7
679[ 3.045578] mmc0: new high speed DDR MMC card at address 0001
680[ 3.046958] mmcblk0: mmc0:0001 BIWIN 29.1 GiB
681[ 3.048767] EFI Variables Facility v0.08 2004-May-17
682[ 3.052381] trigger_algo:Algo_status:2
683[ 3.056132] hidraw: raw HID events driver (C) Jiri Kosina
684[ 3.056653] usbcore: registered new interface driver usbhid
685[ 3.056677] usbhid: USB HID core driver
686[ 3.056800] mmcblk0: p1 p2 p3 p4 p5 p6 p7 p8 p9 p10 p11 p12 p13 p14 p15 p16 p17 p18 p19
687[ 3.059157] zram: Created 1 device(s) ...
688[ 3.062563] ashmem: initialized
689[ 3.063032] logger: created 256K log 'log_main'
690[ 3.063529] logger: created 256K log 'log_events'
691[ 3.064103] logger: created 256K log 'log_radio'
692[ 3.064598] logger: created 256K log 'log_system'
693[ 3.074440] mmc1: clock 0Hz busmode 2 powermode 1 cs 0 Vdd 21 width 0 timing 0
694[ 3.091493] tsc: Refined TSC clocksource calibration: 1333.329 MHz
695[ 3.091528] Switching to clocksource tsc
696[ 3.139426] dollar_cove_adc dollar_cove_adc: dc_xpwr adc probed
697[ 3.140154] intel_mid_gps probe called
698[ 3.141080] input: sensor_hall as /devices/platform/sensor_hall/input/input1
699[ 3.141866] emmc_ipanic: init success
700[ 3.142080] Intel OSIP Driver v1.00
701[ 3.143337] Found a Designware HSU
702[ 3.143771] 80860F0A:00: ttyMFD0 at MMIO 0x90f47000 (irq = 39) is a hsu_bt_port_p
703[ 3.144449] Found a Designware HSU
704[ 3.144842] 80860F0A:01: ttyMFD1 at MMIO 0x90f4d000 (irq = 40) is a hsu_gps_port_p
705[ 3.145388] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.07
706[ 3.145788] iTCO_wdt: Found a Baytrail TCO TCO device (Version=3, TCOBASE=0x0460)
707[ 3.146080] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=1)
708[ 3.146653] pwm-byt-plat 80860F09:00: PWM device probed: pwm_num=0, mmio_base=ffffc9000086e000 clk_khz=25000
709[ 3.146833] pwm-byt-plat 80860F09:01: PWM device probed: pwm_num=1, mmio_base=ffffc90000870000 clk_khz=25000
710[ 3.146964] rmnet_async_init++
711[ 3.146986] rmnet_init++
712[ 3.147040] rmnet_setup++
713[ 3.147787] rmnet_setup++
714[ 3.148487] rmnet_setup++
715[ 3.151501] 3RMNET: registering line disc successful.
716[ 3.153395] INFO: I2S DRIVER loading... ver: 1.3.0 cpu=0
717[ 3.153619] INFO: I2S DRIVER DIV CTRL/ISRX active - CPU BYT.
718[ 3.153648] SSP I2S ACPI driver : allocated drv_data=ffff880077c0e028
719[ 3.153868] SSP I2S driver : ACPI probe for **HID=SSPX0000** , drv_data=ffff880077c0e028
720[ 3.153893] SSP I2S driver : IFWI start IA =0x910a1000 end=0x910a1fff
721[ 3.156985] INFO: I2S DRIVER init OK
722[ 3.157177] usbcore: registered new interface driver snd-usb-audio
723[ 3.158378] enter rt5651_modinit
724[ 3.158683] snd_intel_sst: INFO: ******** SST DRIVER loading.. Ver: 3.0.8
725[ 3.161155] snd_intel_sst: Overriding bdata for byt-crv2
726[ 3.163651] snd_intel_sst: sst_acpi_probe successfully done!
727[ 3.163726] snd_intel_sst: runtime_suspend called
728[ 3.164151] mid_ssp: ssp_soc_dai_init: SSP DAI: FCT ssp_soc_dai_init called
729[ 3.164271] mid_ssp: ssp_dai_probe: SSP DAI: FCT ssp_dai_probe enters
730[ 3.164296] mid_ssp: ssp_dai_probe: ssp_info address ffff8800783e8200
731[ 3.164975] mid_ssp: ssp_dai_probe: SSP DAI: FCT ssp_dai_probe leaves 0
732[ 3.165397] Netfilter messages via NETLINK v0.30.
733[ 3.165515] nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
734[ 3.166216] NF_TPROXY: Transparent proxy support initialized, version 4.1.0
735[ 3.166240] NF_TPROXY: Copyright (c) 2006-2007 BalaBit IT Ltd.
736[ 3.168596] ip_tables: (C) 2000-2006 Netfilter Core Team
737[ 3.169069] TCP: cubic registered
738[ 3.169092] Initializing XFRM netlink socket
739[ 3.170141] NET: Registered protocol family 10
740[ 3.172436] ip6_tables: (C) 2000-2006 Netfilter Core Team
741[ 3.174066] sit: IPv6 over IPv4 tunneling driver
742[ 3.175067] NET: Registered protocol family 17
743[ 3.175143] NET: Registered protocol family 15
744[ 3.175467] Bluetooth: RFCOMM TTY layer initialized
745[ 3.175546] Bluetooth: RFCOMM socket layer initialized
746[ 3.175570] Bluetooth: RFCOMM ver 1.11
747[ 3.175590] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
748[ 3.175608] Bluetooth: BNEP filters: protocol multicast
749[ 3.175644] Bluetooth: BNEP socket layer initialized
750[ 3.175665] Bluetooth: HIDP (Human Interface Emulation) ver 1.2
751[ 3.175699] Bluetooth: HIDP socket layer initialized
752[ 3.175803] Key type dns_resolver registered
753[ 3.177755] [drm:drm_pci_agp_init] *ERROR* Cannot initialize the agpgart module.
754[ 3.178088] DRM: Fill_in_dev failed.
755[ 3.179903] lesskey_pnp_probe, num = 1
756[ 3.180451] lesskey [ 0]: name = power_btn, gpio = 222
757[ 3.180685] lesskey_pnp_probe, num = 1
758[ 3.181201] lesskey [ 0]: name = rotationlock, gpio = 295
759[ 3.181584] lesskey_pnp_probe, num = 2
760[ 3.182098] lesskey [ 0]: name = volume_up, gpio = 1
761[ 3.182597] lesskey [ 1]: name = volume_down, gpio = 0
762[ 3.182864] VLV2: warn punit OS is Android
763[ 3.182908] Informing PUnit we are running Android
764[ 3.183880] registered taskstats version 1
765[ 3.191245] LDO_2: incomplete constraints, leaving on
766[ 3.192243] Magic number: 0:483:744
767[ 3.192294] intel_mid_osip intel_mid_osip: hash matches
768[ 3.192542] netpoll: netconsole: couldn't parse config at '192.168.1.24,24:EC:99:45:7C:12'!
769[ 3.192561] netconsole: cleaning up
770[ 3.193166] file system registered
771[ 3.196735] android_usb gadget: Mass Storage Function, version: 2009/09/11
772[ 3.196767] android_usb gadget: Number of LUNs=1
773[ 3.196792] lun0: LUN: removable file: (no medium)
774[ 3.198159] android_usb gadget: android_usb ready
775[ 3.198927] gpio-keys gpio-lesskey.1.auto: Failed to request GPIO 222, error -517
776[ 3.199292] platform gpio-lesskey.1.auto: Driver gpio-keys requests probe deferral
777[ 3.199368] gpio-keys gpio-lesskey.2.auto: Failed to request GPIO 295, error -517
778[ 3.199712] platform gpio-lesskey.2.auto: Driver gpio-keys requests probe deferral
779[ 3.200321] input: gpio-lesskey as /devices/platform/gpio-lesskey.3.auto/input/input2
780[ 3.201120] rtc_cmos 00:00: setting system clock to 2016-09-13 17:44:37 UTC (1473788677)
781[ 3.201274] gpio-keys gpio-lesskey.1.auto: Failed to request GPIO 222, error -517
782[ 3.201584] vbus_warn vbus_warn: vbus warn probe finished
783[ 3.201867] platform gpio-lesskey.1.auto: Driver gpio-keys requests probe deferral
784[ 3.202281] gpio-keys gpio-lesskey.2.auto: Failed to request GPIO 295, error -517
785[ 3.202650] platform gpio-lesskey.2.auto: Driver gpio-keys requests probe deferral
786[ 3.210069] gpio-keys gpio-lesskey.1.auto: Failed to request GPIO 222, error -517
787[ 3.210429] platform gpio-lesskey.1.auto: Driver gpio-keys requests probe deferral
788[ 3.210560] gpio-keys gpio-lesskey.2.auto: Failed to request GPIO 295, error -517
789[ 3.210907] platform gpio-lesskey.2.auto: Driver gpio-keys requests probe deferral
790[ 3.217690] dollar_cove_pwrsrc dollar_cove_pwrsrc: Last shutdown caused by user pressing the power button
791[ 3.257143] dollar_cove_pwrsrc dollar_cove_pwrsrc: VBUS present
792[ 3.262074] dollar_cove_pwrsrc dollar_cove_pwrsrc: Stat:0, Cfg:1
793[ 3.262084] dollar_cove_pwrsrc dollar_cove_pwrsrc: disconnect or unknown or ID event
794[ 3.262147] dwc3_otg 0000:00:16.0: [manually trigger] ID notification (id = 0)
795[ 3.262160] dollar_cove_charger dollar_cove_charger: [OTG notification]evt:2 val:0
796[ 3.262175] dollar_cove_pwrsrc dollar_cove_pwrsrc: [OTG notification]evt:2 val:0
797[ 3.342067] mmc1: clock 400000Hz busmode 2 powermode 2 cs 0 Vdd 7 width 0 timing 0
798[ 3.348920] mmc1: clock 400000Hz busmode 2 powermode 2 cs 1 Vdd 7 width 0 timing 0
799[ 3.351180] mmc1: clock 400000Hz busmode 2 powermode 2 cs 0 Vdd 7 width 0 timing 0
800[ 3.352965] mmc1: clock 400000Hz busmode 2 powermode 2 cs 0 Vdd 17 width 0 timing 0
801[ 3.362608] mmc_sd_go_highspeed set high speed
802[ 3.362667] mmc1: clock 400000Hz busmode 2 powermode 2 cs 0 Vdd 7 width 0 timing 2
803[ 3.362777] mmc1: clock 50000000Hz busmode 2 powermode 2 cs 0 Vdd 7 width 0 timing 2
804[ 3.362953] mmc1: clock 50000000Hz busmode 2 powermode 2 cs 0 Vdd 7 width 2 timing 2
805[ 3.364435] mmc1: new high speed SDIO card at address 0001
806[ 3.364522] mmc1: clock 0Hz busmode 1 powermode 0 cs 0 Vdd 0 width 0 timing 0
807[ 3.371490] dollar_cove_pwrsrc dollar_cove_pwrsrc: Switching MUX to 0
808[ 3.371776] gpio-keys gpio-lesskey.1.auto: Failed to request GPIO 222, error -517
809[ 3.372150] platform gpio-lesskey.1.auto: Driver gpio-keys requests probe deferral
810[ 3.372289] gpio-keys gpio-lesskey.2.auto: Failed to request GPIO 295, error -517
811[ 3.372637] platform gpio-lesskey.2.auto: Driver gpio-keys requests probe deferral
812[ 3.377881] input: dollar_cove_power_button as /devices/platform/80860F41:04/i2c-5/5-0034/dollar_cove_power_button/input/input3
813[ 3.399486] gpio-keys gpio-lesskey.1.auto: Failed to request GPIO 222, error -517
814[ 3.399601] platform gpio-lesskey.1.auto: Driver gpio-keys requests probe deferral
815[ 3.399607] snd_byt_bl_rt5642: Baytrail Machine Driver byt_rt5642 registerd
816[ 3.399688] gpio-keys gpio-lesskey.2.auto: Failed to request GPIO 295, error -517
817[ 3.399800] platform gpio-lesskey.2.auto: Driver gpio-keys requests probe deferral
818[ 3.400485] Codec driver version 0.8.4 alsa 1.0.25
819[ 3.465336] mid_ssp: ssp_probe: SSP DAI: FCT ssp_probe enters for CPU_DAI 1
820[ 3.465346] mid_ssp: ssp_probe: SSP DAI: FCT ssp_probe ssp_config ffff880077d64e80
821[ 3.465374] mid_ssp: ssp_probe: SSP DAI: FCT ssp_probe enters for CPU_DAI 0
822[ 3.465389] mid_ssp: ssp_probe: SSP DAI: FCT ssp_probe ssp_config ffff880077d64f00
823[ 3.466166] byt_rt5642 AMCR0F28:00: rt5640-aif1 <-> Headset-cpu-dai mapping ok
824[ 3.466448] byt_rt5642 AMCR0F28:00: rt5640-aif2 <-> Voice-cpu-dai mapping ok
825[ 3.466537] compress asoc: rt5640-aif1 <-> Compress-cpu-dai mapping ok
826[ 3.466818] byt_rt5642 AMCR0F28:00: snd-soc-dummy-dai <-> ssp-bt-cpu-dai mapping ok
827[ 3.467129] byt_rt5642 AMCR0F28:00: snd-soc-dummy-dai <-> ssp-modem-cpu-dai mapping ok
828[ 3.470732] rt5640 2-001c: ASoC: mux INR Mux has no paths
829[ 3.470846] rt5640 2-001c: ASoC: mux INL Mux has no paths
830[ 3.475643] input: baytrailaudio Intel MID Audio Jack as /devices/platform/AMCR0F28:00/sound/card0/input4
831[ 3.479675] snd_byt_bl_rt5642: snd_byt_mc_probe successful
832[ 3.479836] gpio-keys gpio-lesskey.1.auto: Failed to request GPIO 222, error -517
833[ 3.479981] platform gpio-lesskey.1.auto: Driver gpio-keys requests probe deferral
834[ 3.480070] gpio-keys gpio-lesskey.2.auto: Failed to request GPIO 295, error -517
835[ 3.480222] platform gpio-lesskey.2.auto: Driver gpio-keys requests probe deferral
836[ 3.480582] snd_byt_cr_aic3100: Baytrail Machine Driver byt_aic31xx registerd
837[ 3.480599] Baytrail Machine Driver byt_catalog_audio registerd
838[ 3.480789] ALSA device list:
839[ 3.480805] #0: baytrailaudio
840[ 3.481101] Waiting 15sec before mounting root device...
841[ 3.811718] xhci_hcd 0000:00:14.0: power state changed by ACPI to D0
842[ 3.831613] xhci_hcd 0000:00:14.0: power state changed by ACPI to D0
843[ 3.851467] xhci_hcd 0000:00:14.0: setting latency timer to 64
844[ 3.851597] usb usb1: usb wakeup-resume
845[ 3.851653] hub 1-0:1.0: hub_resume
846[ 3.851709] hub 1-0:1.0: port 1: status 0101 change 0001
847[ 3.851855] usb usb2: usb wakeup-resume
848[ 3.851900] hub 2-0:1.0: hub_resume
849[ 3.852016] hub 2-0:1.0: state 7 ports 1 chg 0000 evt 0000
850[ 3.852122] hub 2-0:1.0: hub_suspend
851[ 3.961500] hub 1-0:1.0: state 7 ports 6 chg 0002 evt 0000
852[ 3.961623] hub 1-0:1.0: port 1, status 0101, change 0000, 12 Mb/s
853[ 3.961660] hub 1-0:1.0: hub_port_connect_change add 5s wake_lock for port connect change
854[ 4.081462] usb 1-1: new high-speed USB device number 2 using xhci_hcd
855[ 4.102072] usb 1-1: udev 2, busnum 1, minor = 1
856[ 4.102107] usb 1-1: New USB device found, idVendor=1a40, idProduct=0101
857[ 4.102134] usb 1-1: New USB device strings: Mfr=0, Product=1, SerialNumber=0
858[ 4.102158] usb 1-1: Product: USB 2.0 Hub
859[ 4.102825] usb 1-1: usb_probe_device
860[ 4.103350] hub 1-1:1.0: usb_probe_interface
861[ 4.103381] hub 1-1:1.0: usb_probe_interface - got id
862[ 4.103417] hub 1-1:1.0: USB hub found
863[ 4.103515] hub 1-1:1.0: 4 ports detected
864[ 4.103544] hub 1-1:1.0: standalone hub
865[ 4.103567] hub 1-1:1.0: ganged power switching
866[ 4.103589] hub 1-1:1.0: global over-current protection
867[ 4.103610] hub 1-1:1.0: Single TT
868[ 4.103634] hub 1-1:1.0: TT requires at most 8 FS bit times (666 ns)
869[ 4.103657] hub 1-1:1.0: power on to power good time: 100ms
870[ 4.104031] hub 1-1:1.0: local power source is good
871[ 4.104060] hub 1-1:1.0: no over-current condition exists
872[ 4.104578] hub 1-1:1.0: enabling power on all ports
873[ 4.105096] gpio-keys gpio-lesskey.1.auto: Failed to request GPIO 222, error -517
874[ 4.105457] platform gpio-lesskey.1.auto: Driver gpio-keys requests probe deferral
875[ 4.105595] gpio-keys gpio-lesskey.2.auto: Failed to request GPIO 295, error -517
876[ 4.105942] platform gpio-lesskey.2.auto: Driver gpio-keys requests probe deferral
877[ 4.106444] gpio-keys gpio-lesskey.1.auto: Failed to request GPIO 222, error -517
878[ 4.106794] platform gpio-lesskey.1.auto: Driver gpio-keys requests probe deferral
879[ 4.106928] gpio-keys gpio-lesskey.2.auto: Failed to request GPIO 295, error -517
880[ 4.107272] platform gpio-lesskey.2.auto: Driver gpio-keys requests probe deferral
881[ 4.201557] hub 1-1:1.0: port 1: status 0101 change 0001
882[ 4.301487] hub 1-1:1.0: state 7 ports 4 chg 0002 evt 0000
883[ 4.301629] hub 1-1:1.0: port 1, status 0101, change 0000, 12 Mb/s
884[ 4.301663] hub 1-1:1.0: hub_port_connect_change add 5s wake_lock for port connect change
885[ 4.381528] usb 1-1.1: new high-speed USB device number 3 using xhci_hcd
886[ 4.402043] usb 1-1.1: udev 3, busnum 1, minor = 2
887[ 4.402078] usb 1-1.1: New USB device found, idVendor=1a40, idProduct=0101
888[ 4.402104] usb 1-1.1: New USB device strings: Mfr=0, Product=1, SerialNumber=0
889[ 4.402129] usb 1-1.1: Product: USB 2.0 Hub
890[ 4.402788] usb 1-1.1: usb_probe_device
891[ 4.403372] hub 1-1.1:1.0: usb_probe_interface
892[ 4.403403] hub 1-1.1:1.0: usb_probe_interface - got id
893[ 4.403438] hub 1-1.1:1.0: USB hub found
894[ 4.403565] hub 1-1.1:1.0: 4 ports detected
895[ 4.403594] hub 1-1.1:1.0: standalone hub
896[ 4.403617] hub 1-1.1:1.0: ganged power switching
897[ 4.403640] hub 1-1.1:1.0: global over-current protection
898[ 4.403661] hub 1-1.1:1.0: Single TT
899[ 4.403685] hub 1-1.1:1.0: TT requires at most 8 FS bit times (666 ns)
900[ 4.403707] hub 1-1.1:1.0: power on to power good time: 100ms
901[ 4.404095] hub 1-1.1:1.0: local power source is good
902[ 4.404123] hub 1-1.1:1.0: no over-current condition exists
903[ 4.404601] hub 1-1.1:1.0: enabling power on all ports
904[ 4.405086] gpio-keys gpio-lesskey.1.auto: Failed to request GPIO 222, error -517
905[ 4.405443] platform gpio-lesskey.1.auto: Driver gpio-keys requests probe deferral
906[ 4.405581] gpio-keys gpio-lesskey.2.auto: Failed to request GPIO 295, error -517
907[ 4.405928] platform gpio-lesskey.2.auto: Driver gpio-keys requests probe deferral
908[ 4.406262] gpio-keys gpio-lesskey.1.auto: Failed to request GPIO 222, error -517
909[ 4.406611] platform gpio-lesskey.1.auto: Driver gpio-keys requests probe deferral
910[ 4.406745] gpio-keys gpio-lesskey.2.auto: Failed to request GPIO 295, error -517
911[ 4.407089] platform gpio-lesskey.2.auto: Driver gpio-keys requests probe deferral
912[ 4.407329] hub 1-1:1.0: state 7 ports 4 chg 0000 evt 0002
913[ 4.501637] hub 1-1.1:1.0: port 2: status 0101 change 0001
914[ 4.501973] hub 1-1.1:1.0: port 4: status 0301 change 0001
915[ 4.601486] hub 1-1.1:1.0: state 7 ports 4 chg 0014 evt 0000
916[ 4.601627] hub 1-1.1:1.0: port 2, status 0101, change 0000, 12 Mb/s
917[ 4.601662] hub 1-1.1:1.0: hub_port_connect_change add 5s wake_lock for port connect change
918[ 4.681539] usb 1-1.1.2: new high-speed USB device number 4 using xhci_hcd
919[ 4.705443] usb 1-1.1.2: udev 4, busnum 1, minor = 3
920[ 4.705478] usb 1-1.1.2: New USB device found, idVendor=0951, idProduct=162d
921[ 4.705505] usb 1-1.1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
922[ 4.705529] usb 1-1.1.2: Product: DataTraveler 102
923[ 4.705552] usb 1-1.1.2: Manufacturer: Kingston
924[ 4.705575] usb 1-1.1.2: SerialNumber: 001CC0EC34ADF03106A1069B
925[ 4.706257] usb 1-1.1.2: usb_probe_device
926[ 4.706322] usb 1-1.1.2: ep 0x81 - rounding interval to 128 microframes, ep desc says 255 microframes
927[ 4.706367] usb 1-1.1.2: ep 0x2 - rounding interval to 128 microframes, ep desc says 255 microframes
928[ 4.706958] usb-storage 1-1.1.2:1.0: usb_probe_interface
929[ 4.707011] usb-storage 1-1.1.2:1.0: usb_probe_interface - got id
930[ 4.707045] usb-storage 1-1.1.2:1.0: USB Mass Storage device detected
931[ 4.707717] scsi0 : usb-storage 1-1.1.2:1.0
932[ 4.708319] gpio-keys gpio-lesskey.1.auto: Failed to request GPIO 222, error -517
933[ 4.708677] platform gpio-lesskey.1.auto: Driver gpio-keys requests probe deferral
934[ 4.708814] gpio-keys gpio-lesskey.2.auto: Failed to request GPIO 295, error -517
935[ 4.709162] platform gpio-lesskey.2.auto: Driver gpio-keys requests probe deferral
936[ 4.709614] gpio-keys gpio-lesskey.1.auto: Failed to request GPIO 222, error -517
937[ 4.709963] platform gpio-lesskey.1.auto: Driver gpio-keys requests probe deferral
938[ 4.710097] gpio-keys gpio-lesskey.2.auto: Failed to request GPIO 295, error -517
939[ 4.710443] platform gpio-lesskey.2.auto: Driver gpio-keys requests probe deferral
940[ 4.710779] hub 1-1.1:1.0: port 4, status 0301, change 0000, 1.5 Mb/s
941[ 4.710814] hub 1-1.1:1.0: hub_port_connect_change add 5s wake_lock for port connect change
942[ 4.721547] hub 1-1.1:1.0: port 4 not reset yet, waiting 10ms
943[ 4.801539] usb 1-1.1.4: new low-speed USB device number 5 using xhci_hcd
944[ 4.843735] usb 1-1.1.4: udev 5, busnum 1, minor = 4
945[ 4.843769] usb 1-1.1.4: New USB device found, idVendor=04d9, idProduct=1603
946[ 4.843795] usb 1-1.1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=0
947[ 4.843819] usb 1-1.1.4: Product: USB Keyboard
948[ 4.843842] usb 1-1.1.4: Manufacturer:
949[ 4.844533] usb 1-1.1.4: usb_probe_device
950[ 4.844599] usb 1-1.1.4: ep 0x81 - rounding interval to 64 microframes, ep desc says 80 microframes
951[ 4.844646] usb 1-1.1.4: ep 0x82 - rounding interval to 64 microframes, ep desc says 80 microframes
952[ 4.846202] usbhid 1-1.1.4:1.0: usb_probe_interface
953[ 4.846233] usbhid 1-1.1.4:1.0: usb_probe_interface - got id
954[ 4.856886] input: USB Keyboard as /devices/pci0000:00/0000:00:14.0/usb1/1-1/1-1.1/1-1.1.4/1-1.1.4:1.0/input/input5
955[ 4.857833] hid-generic 0003:04D9:1603.0001: input,hidraw0: USB HID v1.10 Keyboard [ USB Keyboard] on usb-0000:00:14.0-1.1.4/input0
956[ 4.858056] gpio-keys gpio-lesskey.1.auto: Failed to request GPIO 222, error -517
957[ 4.858414] platform gpio-lesskey.1.auto: Driver gpio-keys requests probe deferral
958[ 4.858553] gpio-keys gpio-lesskey.2.auto: Failed to request GPIO 295, error -517
959[ 4.858900] platform gpio-lesskey.2.auto: Driver gpio-keys requests probe deferral
960[ 4.859116] gpio-keys gpio-lesskey.1.auto: Failed to request GPIO 222, error -517
961[ 4.859464] platform gpio-lesskey.1.auto: Driver gpio-keys requests probe deferral
962[ 4.859598] gpio-keys gpio-lesskey.2.auto: Failed to request GPIO 295, error -517
963[ 4.859942] platform gpio-lesskey.2.auto: Driver gpio-keys requests probe deferral
964[ 4.860437] usbhid 1-1.1.4:1.1: usb_probe_interface
965[ 4.860468] usbhid 1-1.1.4:1.1: usb_probe_interface - got id
966[ 4.878088] input: USB Keyboard as /devices/pci0000:00/0000:00:14.0/usb1/1-1/1-1.1/1-1.1.4/1-1.1.4:1.1/input/input6
967[ 4.879025] hid-generic 0003:04D9:1603.0002: input,hidraw1: USB HID v1.10 Device [ USB Keyboard] on usb-0000:00:14.0-1.1.4/input1
968[ 4.879199] gpio-keys gpio-lesskey.1.auto: Failed to request GPIO 222, error -517
969[ 4.879556] platform gpio-lesskey.1.auto: Driver gpio-keys requests probe deferral
970[ 4.879693] gpio-keys gpio-lesskey.2.auto: Failed to request GPIO 295, error -517
971[ 4.880040] platform gpio-lesskey.2.auto: Driver gpio-keys requests probe deferral
972[ 4.880254] gpio-keys gpio-lesskey.1.auto: Failed to request GPIO 222, error -517
973[ 4.880603] platform gpio-lesskey.1.auto: Driver gpio-keys requests probe deferral
974[ 4.880738] gpio-keys gpio-lesskey.2.auto: Failed to request GPIO 295, error -517
975[ 4.881082] platform gpio-lesskey.2.auto: Driver gpio-keys requests probe deferral
976[ 4.881489] gpio-keys gpio-lesskey.1.auto: Failed to request GPIO 222, error -517
977[ 4.881839] platform gpio-lesskey.1.auto: Driver gpio-keys requests probe deferral
978[ 4.881973] gpio-keys gpio-lesskey.2.auto: Failed to request GPIO 295, error -517
979[ 4.882318] platform gpio-lesskey.2.auto: Driver gpio-keys requests probe deferral
980[ 4.882549] hub 1-1.1:1.0: state 7 ports 4 chg 0000 evt 0004
981[ 5.702739] scsi 0:0:0:0: Direct-Access Kingston DataTraveler 102 1.00 PQ: 0 ANSI: 2
982[ 5.704350] sd 0:0:0:0: Attached scsi generic sg0 type 0
983[ 5.704372] gpio-keys gpio-lesskey.1.auto: Failed to request GPIO 222, error -517
984[ 5.704411] platform gpio-lesskey.1.auto: Driver gpio-keys requests probe deferral
985[ 5.704530] gpio-keys gpio-lesskey.2.auto: Failed to request GPIO 295, error -517
986[ 5.704563] platform gpio-lesskey.2.auto: Driver gpio-keys requests probe deferral
987[ 5.706288] sd 0:0:0:0: [sda] 7818184 512-byte logical blocks: (4.00 GB/3.72 GiB)
988[ 5.706877] sd 0:0:0:0: [sda] Write Protect is off
989[ 5.706914] sd 0:0:0:0: [sda] Mode Sense: 03 00 00 00
990[ 5.707438] sd 0:0:0:0: [sda] No Caching mode page found
991[ 5.707692] sd 0:0:0:0: [sda] Assuming drive cache: write through
992[ 5.711470] sd 0:0:0:0: [sda] No Caching mode page found
993[ 5.711724] sd 0:0:0:0: [sda] Assuming drive cache: write through
994[ 5.712959] sda: sda1 sda2
995[ 5.716685] sd 0:0:0:0: [sda] No Caching mode page found
996[ 5.716940] sd 0:0:0:0: [sda] Assuming drive cache: write through
997[ 5.717211] sd 0:0:0:0: [sda] Attached SCSI removable disk
998[ 18.481477] md: Waiting for all devices to be available before autodetect
999[ 18.481505] md: If you don't use raid, use raid=noautodetect
1000[ 18.482638] md: Autodetecting RAID arrays.
1001[ 18.482666] md: Scanned 0 and added 0 devices.
1002[ 18.482684] md: autorun ...
1003[ 18.482700] md: ... autorun DONE.
1004[ 18.484843] EXT4-fs (sda2): couldn't mount as ext3 due to feature incompatibilities
1005[ 18.486807] EXT4-fs (sda2): couldn't mount as ext2 due to feature incompatibilities
1006[ 18.502830] EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: (null)
1007[ 18.502916] VFS: Mounted root (ext4 filesystem) on device 8:2.
1008[ 18.503863] devtmpfs: mounted
1009[ 18.513994] Freeing unused kernel memory: 1252k freed
1010[ 18.514961] Write protecting the kernel read-only data: 16384k
1011[ 18.529337] Freeing unused kernel memory: 580k freed
1012[ 18.541681] Freeing unused kernel memory: 1816k freed
1013[ 18.859416] systemd[1]: systemd 208 running in system mode. (+PAM -LIBWRAP -AUDIT -SELINUX +IMA +SYSVINIT -LIBCRYPTSETUP +GCRYPT +ACL +XZ)
1014[ 18.865007] systemd[1]: Set hostname to <Jolla>.
1015[ 19.065309] systemd[1]: usb-moded.service has a D-Bus service name specified, but is not of type dbus. Ignoring.
1016[ 19.150231] systemd[1]: sensorfwd.service has a D-Bus service name specified, but is not of type dbus. Ignoring.
1017[ 19.218824] systemd[1]: Starting Login Prompts.
1018[ 19.219852] systemd[1]: Reached target Login Prompts.
1019[ 19.220020] systemd[1]: Starting Forward Password Requests to Wall Directory Watch.
1020[ 19.220808] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
1021[ 19.220958] systemd[1]: Starting /dev/initctl Compatibility Named Pipe.
1022[ 19.222485] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
1023[ 19.222626] systemd[1]: Starting Delayed Shutdown Socket.
1024[ 19.233284] systemd[1]: Listening on Delayed Shutdown Socket.
1025[ 19.233513] systemd[1]: Starting Collect Read-Ahead Data...
1026[ 19.246436] systemd[1]: Starting udev Kernel Socket.
1027[ 19.253854] systemd[1]: Listening on udev Kernel Socket.
1028[ 19.253931] systemd[1]: Starting udev Control Socket.
1029[ 19.256754] systemd[1]: Listening on udev Control Socket.
1030[ 19.256849] systemd[1]: Started Replay Read-Ahead Data.
1031[ 19.256909] systemd[1]: Starting Dispatch Password Requests to Console Directory Watch.
1032[ 19.257139] systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
1033[ 19.257198] systemd[1]: Starting Journal Socket.
1034[ 19.258141] systemd-readahead[162]: Failed to mark /: Invalid argument
1035[ 19.262562] systemd[1]: Listening on Journal Socket.
1036[ 19.262686] systemd[1]: Mounted Huge Pages File System.
1037[ 19.262746] systemd[1]: Starting udev Coldplug all Devices...
1038[ 19.266366] systemd[1]: Mounting Debug File System...
1039[ 19.270427] systemd[1]: Starting Journal Service...
1040[ 19.277738] systemd[1]: Started Journal Service.
1041[ 19.377059] systemd-journald[166]: Vacuuming done, freed 0 bytes
1042[ 19.766758] systemd-udevd[192]: starting version 208
1043[ 20.094153] bcm_bt_lpm OBDA8723:00: Error evaluating UART port number
1044[ 20.098109] gpio-keys gpio-lesskey.1.auto: Failed to request GPIO 222, error -517
1045[ 20.101146] platform gpio-lesskey.1.auto: Driver gpio-keys requests probe deferral
1046[ 20.101236] gpio-keys gpio-lesskey.2.auto: Failed to request GPIO 295, error -517
1047[ 20.104357] platform gpio-lesskey.2.auto: Driver gpio-keys requests probe deferral
1048[ 20.630215] cfg80211: Calling CRDA to update world regulatory domain
1049[ 20.916164] cfg80211: World regulatory domain updated:
1050[ 20.916200] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
1051[ 20.916225] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 2000 mBm)
1052[ 20.916246] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm)
1053[ 20.916266] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A, 2000 mBm)
1054[ 20.916286] cfg80211: (5170000 KHz - 5250000 KHz @ 80000 KHz), (N/A, 2000 mBm)
1055[ 20.916306] cfg80211: (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 2000 mBm)
1056[ 20.916327] cfg80211: (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm)
1057[ 21.020120] atomisp-css2400b0_v21 0000:00:03.0: setting latency timer to 64
1058[ 21.020171] atomisp-css2400b0_v21 0000:00:03.0: irq 105 for MSI/MSI-X
1059[ 21.092363] vxd392: Unknown symbol i915_rpm_put_vxd (err 0)
1060[ 21.092372] vxd392: Unknown symbol i915_drm_dev (err 0)
1061[ 21.092515] vxd392: Unknown symbol i915_rpm_get_vxd (err 0)
1062[ 21.175917] 8723bs: Unknown parameter `blacklist'
1063[ 21.213384] gc2155 2-0021: camera pdata: port: 0 lanes: 1 order: 00000001
1064[ 21.251853] gc2155 2-0021: [gcdriver]: i2c write failed
1065[ 21.256914] gc2155 2-0021: [gcdriver]: i2c write failed
1066[ 21.262063] gc2155 2-0021: [gcdriver]: i2c write failed
1067[ 21.267155] gc2155 2-0021: [gcdriver]: i2c write failed
1068[ 21.267778] gc2155 2-0021: [gcdriver]: i2c write failed
1069[ 21.268404] gc2155 2-0021: [gcdriver]: i2c write failed
1070[ 21.269034] gc2155 2-0021: [gcdriver]: i2c read failed
1071[ 21.269663] gc2155 2-0021: [gcdriver]: i2c write failed
1072[ 21.270330] gc2155 2-0021: [gcdriver]: i2c read failed
1073[ 21.270959] gc2155 2-0021: [gcdriver]: i2c write failed
1074[ 21.271406] gc2155 2-0021: [gcdriver]: i2c write failed
1075[ 21.272041] gc2155 2-0021: [gcdriver]: i2c write failed
1076[ 21.272681] gc2155 2-0021: [gcdriver]: i2c write failed
1077[ 21.273321] gc2155 2-0021: [gcdriver]: i2c read failed
1078[ 21.273984] gc2155 2-0021: [gcdriver]: i2c write failed
1079[ 21.274629] gc2155 2-0021: [gcdriver]: i2c write failed
1080[ 21.275273] gc2155 2-0021: [gcdriver]: i2c write failed
1081[ 21.275917] gc2155 2-0021: [gcdriver]: i2c write failed
1082[ 21.276561] gc2155 2-0021: [gcdriver]: i2c write failed
1083[ 21.277515] gc2155 2-0021: [gcdriver]: i2c write failed
1084[ 21.278161] gc2155 2-0021: [gcdriver]: i2c write failed
1085[ 21.278200] atomisp-css2400b0_v21 0000:00:03.0: Subdev gc0310soc successfully register
1086[ 21.278289] gpio-keys gpio-lesskey.1.auto: Failed to request GPIO 222, error -517
1087[ 21.278305] platform gpio-lesskey.1.auto: Driver gpio-keys requests probe deferral
1088[ 21.278354] gpio-keys gpio-lesskey.2.auto: Failed to request GPIO 295, error -517
1089[ 21.278366] platform gpio-lesskey.2.auto: Driver gpio-keys requests probe deferral
1090[ 21.283158] ++++ov2680_probe++++
1091[ 21.283164] ov2680 2-0036: ++++ov2680_probe++++
1092[ 21.324713] init: could not import file 'props.board.rc' from '/props.rc'
1093[ 21.325633] init: bootmode: unknown
1094[ 21.325688] init: fail to open /proc/boardid!
1095[ 21.373548] ov2680 2-0036: camera pdata: port: 1 lanes: 1 order: 00000002
1096[ 21.387939] gpio-keys gpio-lesskey.1.auto: Failed to request GPIO 222, error -517
1097[ 21.391431] platform gpio-lesskey.1.auto: Driver gpio-keys requests probe deferral
1098[ 21.391524] atomisp-css2400b0_v21 0000:00:03.0: Subdev ov2680b successfully register
1099[ 21.391528] gpio-keys gpio-lesskey.2.auto: Failed to request GPIO 295, error -517
1100[ 21.391540] platform gpio-lesskey.2.auto: Driver gpio-keys requests probe deferral
1101[ 21.398511] ++++ov2680_probe++++
1102[ 21.398526] ov2680 2-0010: ++++ov2680_probe++++
1103[ 21.398570] ov2680f_power_ctrl:++++ov2680f_power_ctrl off
1104[ 21.402193] ov2680f_power_ctrl:++++ov2680f_power_ctrl on
1105[ 21.456372] systemd-journald[166]: Received request to flush runtime journal from PID 1
1106[ 21.471344] ov2680 2-0010: camera pdata: port: 0 lanes: 1 order: 00000002
1107[ 21.472134] ov2680 2-0010: read from offset 0x300a error -121
1108[ 21.475467] ov2680 2-0010: sensor_id_high = 0x8800
1109[ 21.478745] ov2680 2-0010: ov2680_detect err s_config.
1110[ 21.482059] ov2680f_power_ctrl:++++ov2680f_power_ctrl off
1111[ 21.496368] ov2680 2-0010: sensor power-gating failed
1112[ 21.499716] atomisp-css2400b0_v21 0000:00:03.0: Subdev ov2680f detection fail
1113[ 21.505329] atomisp-css2400b0_v21 0000:00:03.0: DFS target frequency=200.
1114[ 21.745870] atomisp-css2400b0_v21 0000:00:03.0: hmm_reserved_pool init successfully,hmm_reserved_pool is with 18432 pages.
1115[ 22.518929] gpio-keys gpio-lesskey.1.auto: Failed to request GPIO 222, error -517
1116[ 22.522289] platform gpio-lesskey.1.auto: Driver gpio-keys requests probe deferral
1117[ 22.522348] gpio-keys gpio-lesskey.2.auto: Failed to request GPIO 295, error -517
1118[ 22.523411] emmc_ipanic: panic partition found, label:panic, device:mmcblk0p8
1119[ 22.525615] platform gpio-lesskey.2.auto: Driver gpio-keys requests probe deferral
1120[ 22.531401] emmc_ipanic: emmc_panic_notify_add: Data available in panic partition
1121[ 22.531432] emmc_ipanic: emmc_panic_notify_add: proc entry created: emmc_ipanic_header
1122[ 22.531453] emmc_ipanic: emmc_panic_notify_add: log file 0(1024, 95790)
1123[ 22.531466] emmc_ipanic: emmc_panic_notify_add: proc entry created: emmc_ipanic_console
1124[ 22.531473] emmc_ipanic: emmc_panic_notify_add: log file 1(97280, 143855)
1125[ 22.531506] emmc_ipanic: emmc_panic_notify_add: proc entry created: emmc_ipanic_threads
1126[ 22.531514] emmc_ipanic: emmc_panic_notify_add: log file 2(4026511360, 0)
1127[ 22.531520] emmc_ipanic: emmc_panic_notify_add: empty log file 2
1128[ 23.092300] misc memnotify: 0xffff88007806fd20 - observer 1 created
1129[ 23.092434] misc memnotify: 0xffff88007806f240 - observer 2 created
1130[ 23.092492] misc memnotify: 0xffff88007806fd20 - threshold set to 0x0
1131[ 23.092513] misc memnotify: 0xffff88007806f240 - threshold set to 0x0
1132[ 23.173752] init: /init.inet_w_32.rc: 306: ignored duplicate definition of service 'surfaceflinger'
1133[ 23.186516] init: /dev/hw_random not found
1134[ 23.189431] init: could not open /dev/keychord
1135[ 23.192832] init: cannot open '/initlogo.rle'
1136[ 23.246816] init: command 'loglevel' r=0
1137[ 23.246869] init: command 'symlink' r=-1
1138[ 23.246907] init: command 'symlink' r=-1
1139[ 23.246995] init: command 'mkdir' r=0
1140[ 23.247790] init: command 'mkdir' r=0
1141[ 23.247847] init: command 'mkdir' r=0
1142[ 23.247935] init: command 'mkdir' r=0
1143[ 23.248029] init: command 'mkdir' r=0
1144[ 23.248130] init: command 'mkdir' r=0
1145[ 23.248229] init: command 'mkdir' r=0
1146[ 23.248325] init: command 'mkdir' r=0
1147[ 23.248419] init: command 'mkdir' r=0
1148[ 23.248511] init: command 'mkdir' r=0
1149[ 23.249482] init: command 'mkdir' r=0
1150[ 23.249576] init: command 'mkdir' r=0
1151[ 23.249669] init: command 'mkdir' r=0
1152[ 23.249744] init: command 'mkdir' r=0
1153[ 23.249809] init: command 'write' r=0
1154[ 23.249871] init: command 'write' r=0
1155[ 23.249926] init: command 'write' r=0
1156[ 23.249981] init: command 'write' r=0
1157[ 23.250018] init: command 'write' r=-2
1158[ 23.250071] init: command 'write' r=0
1159[ 23.250125] init: command 'write' r=0
1160[ 23.250178] init: command 'write' r=0
1161[ 23.250233] init: command 'write' r=0
1162[ 23.250289] init: command 'write' r=0
1163[ 23.250361] init: command 'write' r=0
1164[ 23.250505] init: command 'write' r=0
1165[ 23.250614] init: command 'write' r=0
1166[ 23.250715] init: command 'chown' r=0
1167[ 23.250795] init: command 'chown' r=0
1168[ 23.250848] init: command 'chmod' r=0
1169[ 23.250906] init: command 'mkdir' r=0
1170[ 23.250924] init: processing action 0x9b19f90 (init)
1171[ 23.250941] init: command 'export' r=0
1172[ 23.250958] init: command 'export' r=0
1173[ 23.250975] init: command 'export' r=0
1174[ 23.250991] init: command 'export' r=0
1175[ 23.251007] init: command 'export' r=0
1176[ 23.251023] init: command 'export' r=0
1177[ 23.251039] init: command 'export' r=0
1178[ 23.251055] init: command 'export' r=0
1179[ 23.251070] init: command 'export' r=0
1180[ 23.251087] init: command 'export' r=0
1181[ 23.251102] init: processing action 0x9b1e0d0 (init)
1182[ 23.251115] init: command 'export' r=0
1183[ 23.251198] init: command 'write' r=0
1184[ 23.251343] init: command 'mkdir' r=0
1185[ 23.251441] init: command 'mkdir' r=0
1186[ 23.256890] init: command 'mkdir' r=0
1187[ 23.256934] init: command 'insmod' r=-1
1188[ 23.256980] init: command 'chmod' r=-2
1189[ 23.257013] init: command 'insmod' r=-1
1190[ 23.257084] init: command 'setprop_from_sysfs' r=0
1191[ 23.257143] init: command 'setprop_from_sysfs' r=0
1192[ 23.257202] init: command 'setprop_from_sysfs' r=0
1193[ 23.257261] init: command 'setprop_from_sysfs' r=0
1194[ 23.257279] init: processing action 0x9b226c0 (init)
1195[ 23.257353] init: command 'write' r=0
1196[ 23.258295] init: command 'mkdir' r=0
1197[ 23.259286] init: command 'mkdir' r=0
1198[ 23.260163] init: command 'mkdir' r=0
1199[ 23.260260] init: command 'mkdir' r=0
1200[ 23.260279] init: command 'export' r=0
1201[ 23.260297] init: command 'export' r=0
1202[ 23.260314] init: command 'export' r=0
1203[ 23.260351] init: command 'symlink' r=-1
1204[ 23.260388] init: command 'symlink' r=-1
1205[ 23.260424] init: command 'symlink' r=-1
1206[ 23.261247] init: command 'symlink' r=-1
1207[ 23.261411] init: command 'mkdir' r=0
1208[ 23.261507] init: command 'mkdir' r=0
1209[ 23.261525] init: processing action 0x9b25070 (init)
1210[ 23.261548] init: command 'setprop' r=0
1211[ 23.261572] init: command 'setprop' r=0
1212[ 23.261594] init: command 'setprop' r=0
1213[ 23.261617] init: command 'setprop' r=0
1214[ 23.261640] init: command 'setprop' r=0
1215[ 23.261663] init: command 'setprop' r=0
1216[ 23.261686] init: command 'setprop' r=0
1217[ 23.261708] init: command 'setprop' r=0
1218[ 23.261758] init: command 'setprop' r=0
1219[ 23.261782] init: command 'setprop' r=0
1220[ 23.261805] init: command 'setprop' r=0
1221[ 23.261828] init: command 'setprop' r=0
1222[ 23.261851] init: command 'setprop' r=0
1223[ 23.261874] init: command 'setprop' r=0
1224[ 23.261896] init: command 'setprop' r=0
1225[ 23.261919] init: command 'setprop' r=0
1226[ 23.261961] init: command 'insmod' r=-1
1227[ 23.261995] init: command 'insmod' r=-1
1228[ 23.262028] init: command 'insmod' r=-1
1229[ 23.262046] init: processing action 0x9b273b0 (init)
1230[ 23.262075] init: command 'insmod' r=-1
1231[ 23.262093] init: processing action 0x9b27ae0 (init)
1232[ 23.262217] init: command 'mkdir' r=0
1233[ 23.262236] init: processing action 0x9b22c90 (fs)
1234[ 23.262333] init: command 'mkdir' r=0
1235[ 23.262420] init: command 'mkdir' r=0
1236[ 23.262515] init: command 'mkdir' r=0
1237[ 23.264891] fs_mgr: Cannot open file /fstab.inet_w_32
1238[ 23.267523] init: fs_mgr_mount_all returned an error
1239[ 23.270312] init: command 'mount_all' r=255
1240[ 23.271347] init: command 'mkdir' r=0
1241[ 23.271400] init: command 'chown' r=0
1242[ 23.271447] init: command 'chmod' r=0
1243[ 23.271519] init: command 'mkdir' r=0
1244[ 23.271566] init: command 'chown' r=0
1245[ 23.271613] init: command 'chmod' r=0
1246[ 23.271642] init: processing action 0x9b16500 (post-fs)
1247[ 23.271690] init: command 'chown' r=0
1248[ 23.271736] init: command 'chmod' r=0
1249[ 23.271861] init: command 'restorecon' r=0
1250[ 23.272477] init: command 'chown' r=-2
1251[ 23.272510] init: command 'chmod' r=-2
1252[ 23.272598] init: command 'restorecon' r=0
1253[ 23.272655] init: command 'chown' r=0
1254[ 23.272709] init: command 'chmod' r=0
1255[ 23.272757] init: command 'chown' r=-2
1256[ 23.272801] init: command 'chmod' r=-2
1257[ 23.272854] init: command 'chown' r=0
1258[ 23.272907] init: command 'chmod' r=0
1259[ 23.272960] init: command 'chown' r=0
1260[ 23.273012] init: command 'chmod' r=0
1261[ 23.273058] init: command 'chown' r=-2
1262[ 23.273101] init: command 'chmod' r=-2
1263[ 23.273201] init: command 'mkdir' r=0
1264[ 23.273223] init: processing action 0x9b1f450 (post-fs)
1265[ 23.273282] init: command 'chown' r=0
1266[ 23.273351] init: command 'chown' r=0
1267[ 23.273417] init: command 'chown' r=0
1268[ 23.273482] init: command 'chown' r=0
1269[ 23.273537] init: command 'chown' r=0
1270[ 23.273600] init: command 'chown' r=0
1271[ 23.273663] init: command 'chown' r=0
1272[ 23.273726] init: command 'chown' r=0
1273[ 23.273781] init: command 'chown' r=0
1274[ 23.273843] init: command 'chown' r=0
1275[ 23.273905] init: command 'chown' r=0
1276[ 23.273968] init: command 'chown' r=0
1277[ 23.274025] init: command 'chown' r=0
1278[ 23.274080] init: command 'chown' r=0
1279[ 23.274137] init: command 'chown' r=0
1280[ 23.274212] init: command 'chown' r=0
1281[ 23.274288] init: command 'chown' r=0
1282[ 23.274363] init: command 'chmod' r=0
1283[ 23.274438] init: command 'chmod' r=0
1284[ 23.274490] init: command 'chmod' r=-2
1285[ 23.274540] init: command 'chmod' r=-2
1286[ 23.274589] init: command 'chown' r=-2
1287[ 23.274639] init: command 'chown' r=-2
1288[ 23.274677] init: command 'insmod' r=-1
1289[ 23.274729] init: command 'chown' r=0
1290[ 23.274782] init: command 'chown' r=-2
1291[ 23.274831] init: command 'chown' r=-2
1292[ 23.274886] init: command 'chown' r=-2
1293[ 23.274938] init: command 'chown' r=-2
1294[ 23.274990] init: command 'chown' r=-2
1295[ 23.275042] init: command 'chown' r=0
1296[ 23.275093] init: command 'chown' r=0
1297[ 23.275144] init: command 'chown' r=0
1298[ 23.277803] lps331ap 3-005d: Sensor get ID error
1299[ 23.280859] lps331ap 3-005d: sensor_init
1300[ 23.283484] lps331ap: probe of 3-005d failed with error -121
1301[ 23.284518] BSBG0160:00 3-0068: Sensor get ID error
1302[ 23.287407] BSBG0160:00 3-0068: sensor_init
1303[ 23.290056] BSBG0160:00: probe of 3-0068 failed with error -121
1304[ 23.291057] BSBM0150:00 3-0013: Sensor get ID error
1305[ 23.293954] BSBM0150:00 3-0013: sensor_init
1306[ 23.296739] BSBM0150:00: probe of 3-0013 failed with error -121
1307[ 23.296921] BSBA0150:00 3-0011: Fail to get gpio pin by ACPI
1308[ 23.297535] BSBA0150:00 3-0011: Sensor get ID error
1309[ 23.300048] BSBA0150:00 3-0011: sensor_init
1310[ 23.302565] BSBA0150:00: probe of 3-0011 failed with error -121
1311[ 23.303364] l3g4200d_g 3-006b: Sensor get ID error
1312[ 23.305872] l3g4200d_g 3-006b: sensor_init
1313[ 23.308328] l3g4200d_g: probe of 3-006b failed with error -121
1314[ 23.309118] lsm303cmp 3-001e: [431]sensor_exec_actions
1315[ 23.311628] lsm303cmp 3-001e: sensor_init
1316[ 23.314084] lsm303cmp: probe of 3-001e failed with error -121
1317[ 23.314262] accel_g 3-0019: Fail to get gpio pin by ACPI
1318[ 23.314881] accel_g 3-0019: [431]sensor_exec_actions
1319[ 23.317354] accel_g 3-0019: sensor_init
1320[ 23.319800] accel_g: probe of 3-0019 failed with error -121
1321[ 23.319968] CALS3218:00 3-0010: Fail to get gpio pin by ACPI
1322[ 23.320580] CALS3218:00 3-0010: [431]sensor_exec_actions
1323[ 23.323443] CALS3218:00 3-0010: sensor_init
1324[ 23.325932] CALS3218:00: probe of 3-0010 failed with error -121
1325[ 23.326961] CPAK8963:00 3-000c: Sensor get ID error
1326[ 23.329735] CPAK8963:00 3-000c: sensor_init
1327[ 23.332434] CPAK8963:00: probe of 3-000c failed with error -121
1328[ 23.332606] KXCJ9000:00 3-000f: Fail to get gpio pin by ACPI
1329[ 23.339931] input: accel as /devices/platform/80860F41:02/i2c-3/3-000f/input/input7
1330[ 23.342349] gpio-keys gpio-lesskey.1.auto: Failed to request GPIO 222, error -517
1331[ 23.342763] BMA250E:00 3-0018: Sensor get ID error
1332[ 23.342767] BMA250E:00 3-0018: sensor_init
1333[ 23.342780] BMA250E:00: probe of 3-0018 failed with error -121
1334[ 23.342837] init: command 'write' r=0
1335[ 23.342988] init: command 'chown' r=-2
1336[ 23.343100] init: command 'chown' r=-2
1337[ 23.343161] init: command 'chown' r=-2
1338[ 23.343221] init: command 'chown' r=-2
1339[ 23.343285] init: command 'chown' r=-2
1340[ 23.343345] init: command 'chown' r=-2
1341[ 23.343459] init: command 'chown' r=-2
1342[ 23.343569] init: command 'chown' r=-2
1343[ 23.343679] init: command 'chown' r=-2
1344[ 23.343789] init: command 'chown' r=-2
1345[ 23.343900] init: command 'chown' r=-2
1346[ 23.343960] init: command 'chown' r=-2
1347[ 23.344019] init: command 'chown' r=-2
1348[ 23.344067] init: command 'chown' r=-2
1349[ 23.344109] init: command 'chmod' r=-2
1350[ 23.344153] init: command 'chown' r=-2
1351[ 23.344197] init: command 'chmod' r=-2
1352[ 23.344254] init: command 'chown' r=-2
1353[ 23.344316] init: command 'chown' r=-2
1354[ 23.344349] init: command 'symlink' r=0
1355[ 23.344369] init: processing action 0x9b22e70 (post-fs)
1356[ 23.344434] init: command 'chown' r=0
1357[ 23.344497] init: command 'chown' r=0
1358[ 23.344587] init: command 'chown' r=0
1359[ 23.344678] init: command 'chown' r=0
1360[ 23.344740] init: command 'chown' r=0
1361[ 23.344801] init: command 'chown' r=0
1362[ 23.344891] init: command 'chmod' r=0
1363[ 23.344981] init: command 'chmod' r=0
1364[ 23.345000] init: processing action 0x9b246c0 (post-fs)
1365[ 23.345042] init: command 'chown' r=-2
1366[ 23.345086] init: command 'chown' r=-2
1367[ 23.345129] init: command 'chown' r=-2
1368[ 23.345173] init: command 'chown' r=-2
1369[ 23.345215] init: command 'chmod' r=-2
1370[ 23.345257] init: command 'chmod' r=-2
1371[ 23.345299] init: command 'chmod' r=-2
1372[ 23.345340] init: command 'chmod' r=-2
1373[ 23.345354] init: processing action 0x9b254d0 (post-fs)
1374[ 23.345387] init: command 'insmod' r=-1
1375[ 23.345418] init: command 'insmod' r=-1
1376[ 23.345450] init: command 'insmod' r=-1
1377[ 23.345483] init: command 'insmod' r=-1
1378[ 23.345514] init: command 'insmod' r=-1
1379[ 23.345545] init: command 'insmod' r=-1
1380[ 23.345576] init: command 'insmod' r=-1
1381[ 23.345624] init: command 'insmod' r=-1
1382[ 23.345643] init: processing action 0x9b25610 (post-fs)
1383[ 23.345699] init: command 'chown' r=0
1384[ 23.345757] init: command 'chown' r=0
1385[ 23.345819] init: command 'chown' r=0
1386[ 23.345879] init: command 'chown' r=0
1387[ 23.345898] init: processing action 0x9b26eb0 (post-fs)
1388[ 23.351538] platform gpio-lesskey.1.auto: Driver gpio-keys requests probe deferral
1389[ 23.351675] gpio-keys gpio-lesskey.2.auto: Failed to request GPIO 295, error -517
1390[ 23.354745] platform gpio-lesskey.2.auto: Driver gpio-keys requests probe deferral
1391[ 23.602178] init: command 'mkdir' r=0
1392[ 23.602387] init: command 'chown' r=0
1393[ 23.602563] init: command 'chmod' r=0
1394[ 23.606261] init: starting 'bd_prov'
1395[ 23.606748] init: command 'start' r=0
1396[ 23.606885] init: processing action 0x9b284c0 (post-fs)
1397[ 23.607081] init: command 'chmod' r=0
1398[ 23.607281] init: command 'chown' r=0
1399[ 23.607374] init: processing action 0x9b16840 (post-fs-data)
1400[ 23.607544] init: command 'chown' r=0
1401[ 23.607716] init: command 'chmod' r=0
1402[ 23.608126] init: command 'restorecon' r=0
1403[ 23.611623] init: command 'copy' r=-1
1404[ 23.612001] init: command 'mkdir' r=0
1405[ 23.612118] init: command 'copy' r=-1
1406[ 23.614354] init: command 'chown' r=-2
1407[ 23.614479] init: command 'chmod' r=-2
1408[ 23.614591] init: command 'copy' r=-1
1409[ 23.614742] init: command 'chown' r=-2
1410[ 23.614853] init: command 'chmod' r=-2
1411[ 23.614973] init: command 'write' r=-13
1412[ 23.615309] init: command 'mkdir' r=0
1413[ 23.960924] init: command 'mkdir' r=0
1414[ 23.961042] init: command 'mkdir' r=0
1415[ 23.961138] init: command 'mkdir' r=0
1416[ 23.961234] init: command 'mkdir' r=0
1417[ 23.961369] init: command 'mkdir' r=0
1418[ 23.961476] init: command 'mkdir' r=0
1419[ 23.961572] init: command 'mkdir' r=0
1420[ 23.961669] init: command 'mkdir' r=0
1421[ 23.961767] init: command 'mkdir' r=0
1422[ 23.961862] init: command 'mkdir' r=0
1423[ 23.961957] init: command 'mkdir' r=0
1424[ 24.235015] init: command 'chmod' r=-2
1425[ 24.235423] init: command 'mkdir' r=0
1426[ 24.235798] init: command 'mkdir' r=0
1427[ 24.238241] init: command 'mkdir' r=0
1428[ 24.238610] init: command 'mkdir' r=0
1429[ 24.238958] init: command 'mkdir' r=0
1430[ 24.239317] init: command 'mkdir' r=0
1431[ 24.239662] init: command 'mkdir' r=0
1432[ 24.239826] init: command 'mkdir' r=-40
1433[ 24.240167] init: command 'mkdir' r=0
1434[ 24.240510] init: command 'mkdir' r=0
1435[ 24.254188] init: command 'mkdir' r=0
1436[ 24.254556] init: command 'mkdir' r=0
1437[ 24.254907] init: command 'mkdir' r=0
1438[ 24.255077] init: command 'chown' r=0
1439[ 24.255248] init: command 'chmod' r=0
1440[ 24.255611] init: command 'mkdir' r=0
1441[ 24.256015] init: command 'mkdir' r=0
1442[ 24.256370] init: command 'mkdir' r=0
1443[ 24.256510] init: command 'symlink' r=-1
1444[ 24.256856] init: command 'mkdir' r=0
1445[ 24.256953] init: processing action 0x9b1f190 (post-fs-data)
1446[ 24.257290] init: command 'mkdir' r=0
1447[ 24.257465] init: command 'chown' r=0
1448[ 24.257593] init: command 'setprop' r=0
1449[ 24.257952] init: command 'mkdir' r=0
1450[ 24.258125] init: command 'chmod' r=-2
1451[ 24.258292] init: command 'chown' r=-2
1452[ 24.258413] init: command 'symlink' r=0
1453[ 24.258578] init: command 'chmod' r=0
1454[ 24.258736] init: command 'chown' r=0
1455[ 24.258910] init: command 'chown' r=0
1456[ 24.259180] init: command 'chown' r=-2
1457[ 24.259364] init: command 'chown' r=-2
1458[ 24.259801] init: starting 'fg_conf'
1459[ 24.260290] init: command 'start' r=0
1460[ 24.260386] init: command 'setprop' r=0
1461[ 24.260512] init: processing action 0x9b232f0 (post-fs-data)
1462[ 24.260864] init: command 'mkdir' r=0
1463[ 24.261078] init: command 'write' r=0
1464[ 24.272103] init: command 'mkdir' r=0
1465[ 24.272205] init: command 'setprop' r=0
1466[ 24.272305] init: command 'setprop' r=0
1467[ 24.272392] init: command 'setprop' r=0
1468[ 24.272464] init: command 'setprop' r=0
1469[ 24.272548] init: command 'setprop' r=0
1470[ 24.272621] init: command 'setprop' r=0
1471[ 24.272692] init: command 'setprop' r=0
1472[ 24.272763] init: command 'setprop' r=0
1473[ 24.272833] init: command 'setprop' r=0
1474[ 24.272905] init: command 'setprop' r=0
1475[ 24.272956] init: processing action 0x9b25b90 (post-fs-data)
1476[ 24.273234] init: command 'mkdir' r=0
1477[ 24.273318] init: processing action 0x9b25c80 (post-fs-data)
1478[ 24.273630] init: command 'mkdir' r=0
1479[ 24.273938] init: command 'mkdir' r=0
1480[ 24.274201] init: command 'mkdir' r=0
1481[ 24.277599] init: command 'chmod' r=0
1482[ 24.277773] init: command 'chown' r=0
1483[ 24.277972] init: command 'chmod' r=0
1484[ 24.278125] init: command 'chown' r=0
1485[ 24.278324] init: command 'chmod' r=0
1486[ 24.278475] init: command 'chown' r=0
1487[ 24.278546] init: processing action 0x9b28430 (post-fs-data)
1488[ 24.278871] init: command 'mkdir' r=0
1489[ 24.278927] init: command 'chown' r=-1
1490[ 24.278978] init: processing action 0x9b298d0 (mix_hwrng_into_linux_rng)
1491[ 24.279066] init: /dev/hw_random not found
1492[ 24.288125] init: command 'mix_hwrng_into_linux_rng' r=0
1493[ 24.288200] init: processing action 0x9b29920 (property_service_init)
1494[ 24.292299] init: read_file: RETURNING (len:1817):# begin build properties
1495 # autogenerated by buildinfo.sh
1496 ro.build.id=KTU84P
1497 ro.build.display.id=KTU84P.eng.abuild.20150930.115416 dev-keys
1498 ro.build.version.incremental=eng.abuild.20150930.115416
1499 ro.build.version.sdk=19
1500 ro.build.version.codename=REL
1501 ro.build.version.release=4.4.4
1502 ro.build.date=Wed Sep 30 11:55:20 UTC 2015
1503 ro.build.date.utc=1443614120
1504 ro.build.type=user
1505 ro.build.user=abuild
1506 ro.build.host=es-17-21
1507 ro.build.tags=dev-keys
1508 ro.product.model=anzhen4_mrd8_w
1509[ 24.292730] init: error: /props.rc action property:ro.spid.gps.tty=ttyMFD1 must only have setprops commands!
1510[ 24.296160] init: error: /props.rc action property:ro.spid.gps.tty=ttyMFD1 must only have setprops commands!
1511[ 24.299552] init: error: /props.rc action property:ro.spid.gps.tty=ttyMFD1 must only have setprops commands!
1512[ 24.303027] init: error: /props.rc action property:ro.spid.gps.tty=ttyMFD1 must only have setprops commands!
1513[ 24.306409] init: error: /props.rc action property:ro.spid.gps.tty=ttyMFD1 must only have setprops commands!
1514[ 24.309782] init: error: /props.rc action property:ro.spid.gps.tty=ttyMFD1 must only have setprops commands!
1515[ 24.313200] init: error: /props.rc action property:ro.spid.gps.tty=ttyMFD1 must only have setprops commands!
1516[ 24.316594] init: error: /props.rc action property:ro.spid.gps.tty=ttyMFD1 must only have setprops commands!
1517[ 24.331248] init: Created socket '/dev/socket/property_service' with mode '666', user '0', group '0'
1518[ 24.331326] init: command 'property_service_init' r=0
1519[ 24.331354] init: processing action 0x9b29970 (signal_init)
1520[ 24.331418] init: command 'signal_init' r=0
1521[ 24.331445] init: processing action 0x9b299c0 (check_startup)
1522[ 24.331483] init: command 'check_startup' r=0
1523[ 24.331509] init: processing action 0x9b26f80 (early-boot)
1524[ 24.334406] init: command 'chmod' r=-2
1525[ 24.334450] init: command 'setprop' r=0
1526[ 24.334473] init: processing action 0x9b27c60 (early-boot)
1527[ 24.334494] init: command 'setprop' r=0
1528[ 24.334518] init: command 'setprop' r=0
1529[ 24.334541] init: command 'setprop' r=0
1530[ 24.334562] init: processing action 0x9b170d0 (boot)
1531[ 24.334580] init: command 'setrlimit' r=0
1532[ 24.334644] init: command 'write' r=0
1533[ 24.334700] init: command 'write' r=0
1534[ 24.334767] init: command 'write' r=0
1535[ 24.334824] init: command 'write' r=0
1536[ 24.334949] init: command 'write' r=0
1537[ 24.335004] init: command 'write' r=0
1538[ 24.335059] init: command 'write' r=0
1539[ 24.335107] init: command 'chown' r=-2
1540[ 24.335151] init: command 'chown' r=-2
1541[ 24.335195] init: command 'chown' r=-2
1542[ 24.335240] init: command 'chown' r=-2
1543[ 24.335283] init: command 'chown' r=-2
1544[ 24.335333] init: command 'chown' r=-2
1545[ 24.335385] init: command 'chown' r=0
1546[ 24.335435] init: command 'chown' r=0
1547[ 24.335497] init: command 'chown' r=0
1548[ 24.335554] init: command 'chown' r=0
1549[ 24.335611] init: command 'chmod' r=0
1550[ 24.335668] init: command 'chmod' r=0
1551[ 24.335724] init: command 'chmod' r=0
1552[ 24.335791] init: command 'chown' r=0
1553[ 24.335854] init: command 'chmod' r=0
1554[ 24.335918] init: command 'chown' r=0
1555[ 24.335981] init: command 'chmod' r=0
1556[ 24.336045] init: command 'chown' r=0
1557[ 24.336107] init: command 'chmod' r=0
1558[ 24.336171] init: command 'chown' r=0
1559[ 24.336233] init: command 'chmod' r=0
1560[ 24.336297] init: command 'chown' r=0
1561[ 24.336358] init: command 'chmod' r=0
1562[ 24.336422] init: command 'chown' r=0
1563[ 24.336484] init: command 'chmod' r=0
1564[ 24.336548] init: command 'chown' r=0
1565[ 24.336611] init: command 'chmod' r=0
1566[ 24.336676] init: command 'chown' r=0
1567[ 24.336738] init: command 'chmod' r=0
1568[ 24.336825] init: command 'chown' r=0
1569[ 24.336897] init: command 'chown' r=-2
1570[ 24.336967] init: command 'chmod' r=-2
1571[ 24.337031] init: command 'chown' r=0
1572[ 24.337093] init: command 'chmod' r=0
1573[ 24.337157] init: command 'chown' r=0
1574[ 24.337219] init: command 'chmod' r=0
1575[ 24.337287] init: command 'chown' r=-2
1576[ 24.337352] init: command 'chown' r=-2
1577[ 24.337418] init: command 'chown' r=0
1578[ 24.337482] init: command 'chmod' r=0
1579[ 24.337542] init: command 'chown' r=-2
1580[ 24.337601] init: command 'chown' r=-2
1581[ 24.337658] init: command 'chown' r=-2
1582[ 24.337715] init: command 'chown' r=-2
1583[ 24.337772] init: command 'chown' r=-2
1584[ 24.337832] init: command 'chown' r=-2
1585[ 24.337889] init: command 'chown' r=-2
1586[ 24.337946] init: command 'chown' r=-2
1587[ 24.338003] init: command 'chown' r=-2
1588[ 24.338060] init: command 'chown' r=-2
1589[ 24.338118] init: command 'chown' r=-2
1590[ 24.338177] init: command 'chown' r=-2
1591[ 24.338232] init: command 'chown' r=-2
1592[ 24.338292] init: command 'chown' r=0
1593[ 24.338353] init: command 'chown' r=0
1594[ 24.338411] init: command 'chown' r=0
1595[ 24.338469] init: command 'chown' r=0
1596[ 24.338527] init: command 'chown' r=0
1597[ 24.338585] init: command 'chown' r=0
1598[ 24.338657] init: command 'chown' r=0
1599[ 24.338714] init: command 'chown' r=-2
1600[ 24.338770] init: command 'chown' r=-2
1601[ 24.338811] init: command 'setprop' r=0
1602[ 24.338846] init: command 'setprop' r=0
1603[ 24.338881] init: command 'setprop' r=0
1604[ 24.338916] init: command 'setprop' r=0
1605[ 24.338951] init: command 'setprop' r=0
1606[ 24.338985] init: command 'setprop' r=0
1607[ 24.339020] init: command 'setprop' r=0
1608[ 24.339055] init: command 'setprop' r=0
1609[ 24.339089] init: command 'setprop' r=0
1610[ 24.339124] init: command 'setprop' r=0
1611[ 24.339158] init: command 'setprop' r=0
1612[ 24.339307] init: starting 'healthd'
1613[ 24.340657] init: starting 'servicemanager'
1614[ 24.340991] init: starting 'baytrail-setup'
1615[ 24.341263] init: starting 'net_eth0-start'
1616[ 24.344000] init: cannot find '/system/vendor/bin/pvrsrvctl', disabling 'pvrsrvctl'
1617[ 24.347491] init: cannot find '/system/bin/ct_monitor', disabling 'ct_monitor'
1618[ 24.350960] init: cannot find '/sbin/watchdogd', disabling 'watchdogd'
1619[ 24.354871] init: starting 'rfkill_bt'
1620[ 24.355066] init: command 'class_start' r=0
1621[ 24.355251] init: starting 'mdservice'
1622[ 24.355536] init: starting 'minimedia'
1623[ 24.355832] init: starting 'minisf'
1624[ 24.356127] init: starting 'sensorservice'
1625[ 24.356309] init: cannot find '/system/etc/install-recovery.sh', disabling 'flash_recovery'
1626[ 24.359828] init: cannot find '/system/bin/keystore', disabling 'keystore'
1627[ 24.363670] init: starting 'hdcpd'
1628[ 24.364028] init: starting 'rfid_monzaxd'
1629[ 24.364336] init: starting 'enable_houdini'
1630[ 24.364532] init: cannot find '/system/bin/mediaserver', disabling 'media'
1631[ 24.368543] init: starting 'coreu'
1632[ 24.368867] init: starting 'gpscerd'
1633[ 24.369152] init: starting 'gpsd'
1634[ 24.369305] init: command 'class_start' r=0
1635[ 24.369362] init: processing action 0x9b1e320 (boot)
1636[ 24.369399] init: command 'setprop' r=0
1637[ 24.369470] init: command 'chown' r=-2
1638[ 24.369528] init: command 'chown' r=-2
1639[ 24.369605] init: command 'chown' r=0
1640[ 24.369682] init: command 'chown' r=0
1641[ 24.369758] init: command 'chown' r=0
1642[ 24.369832] init: command 'chown' r=0
1643[ 24.369915] init: command 'chown' r=0
1644[ 24.369996] init: command 'chown' r=0
1645[ 24.370074] init: command 'chown' r=0
1646[ 24.370153] init: command 'chown' r=0
1647[ 24.370232] init: command 'chown' r=0
1648[ 24.370310] init: command 'chown' r=0
1649[ 24.370388] init: command 'chown' r=0
1650[ 24.370484] init: command 'chown' r=-2
1651[ 24.370577] init: command 'chown' r=-2
1652[ 24.370656] init: command 'chown' r=0
1653[ 24.370732] init: command 'chown' r=0
1654[ 24.370813] init: command 'chown' r=0
1655[ 24.370889] init: command 'chown' r=0
1656[ 24.370986] init: command 'chown' r=-2
1657[ 24.371078] init: command 'chown' r=-2
1658[ 24.371173] init: command 'chown' r=-2
1659[ 24.371264] init: command 'chown' r=-2
1660[ 24.371463] init: command 'chown' r=-2
1661[ 24.371524] init: command 'chown' r=-2
1662[ 24.371582] init: command 'chown' r=-2
1663[ 24.371640] init: command 'chown' r=-2
1664[ 24.371705] init: command 'chown' r=0
1665[ 24.371766] init: command 'chown' r=0
1666[ 24.371829] init: command 'chown' r=0
1667[ 24.371890] init: command 'chown' r=0
1668[ 24.371951] init: command 'chown' r=0
1669[ 24.372012] init: command 'chown' r=0
1670[ 24.372073] init: command 'chown' r=0
1671[ 24.372133] init: command 'chown' r=0
1672[ 24.372192] init: command 'chown' r=0
1673[ 24.372249] init: command 'chown' r=0
1674[ 24.372292] init: command 'chown' r=-40
1675[ 24.372352] init: command 'chown' r=-2
1676[ 24.372411] init: command 'chown' r=-2
1677[ 24.372469] init: command 'chown' r=-2
1678[ 24.372511] init: command 'chmod' r=-40
1679[ 24.372569] init: command 'chmod' r=-2
1680[ 24.372628] init: command 'chmod' r=-2
1681[ 24.372686] init: command 'chmod' r=-2
1682[ 24.372750] init: command 'chmod' r=0
1683[ 24.372784] init: command 'setprop' r=0
1684[ 24.372813] init: command 'setprop' r=0
1685[ 24.372840] init: command 'setprop' r=0
1686[ 24.372868] init: command 'setprop' r=0
1687[ 24.372895] init: command 'setprop' r=0
1688[ 24.372922] init: command 'setprop' r=0
1689[ 24.372950] init: command 'setprop' r=0
1690[ 24.373392] init: command 'chown' r=-2
1691[ 24.373504] init: command 'chown' r=-2
1692[ 24.373612] init: command 'chown' r=-2
1693[ 24.373655] init: command 'setprop' r=0
1694[ 24.373694] init: command 'setprop' r=0
1695[ 24.373731] init: command 'setprop' r=0
1696[ 24.373768] init: command 'setprop' r=0
1697[ 24.373805] init: command 'setprop' r=0
1698[ 24.373977] init: command 'setprop' r=0
1699[ 24.374018] init: command 'setprop' r=0
1700[ 24.374056] init: command 'setprop' r=0
1701[ 24.374093] init: command 'setprop' r=0
1702[ 24.374131] init: command 'setprop' r=0
1703[ 24.374169] init: command 'setprop' r=0
1704[ 24.374922] init: command 'setprop' r=0
1705[ 24.375236] init: command 'setprop' r=0
1706[ 24.375286] init: command 'write' r=-2
1707[ 24.375330] init: command 'setprop' r=0
1708[ 24.375359] init: command 'setprop' r=0
1709[ 24.375387] init: command 'setprop' r=0
1710[ 24.375485] init: command 'write' r=0
1711[ 24.375885] init: command 'write' r=0
1712[ 24.375922] init: processing action 0x9b22990 (boot)
1713[ 24.375974] init: command 'chown' r=-2
1714[ 24.376025] init: command 'chmod' r=-2
1715[ 24.376067] init: command 'chown' r=-40
1716[ 24.376129] init: command 'chown' r=-2
1717[ 24.376186] init: command 'chown' r=-2
1718[ 24.376244] init: command 'chown' r=-2
1719[ 24.376284] init: command 'chmod' r=-40
1720[ 24.376344] init: command 'chmod' r=-2
1721[ 24.376402] init: command 'chmod' r=-2
1722[ 24.376460] init: command 'chmod' r=-2
1723[ 24.376553] init: command 'write' r=0
1724[ 24.376632] init: command 'write' r=0
1725[ 24.376699] init: command 'write' r=0
1726[ 24.376765] init: command 'write' r=0
1727[ 24.376828] init: command 'write' r=0
1728[ 24.376859] init: processing action 0x9b243c0 (boot)
1729[ 24.376932] init: command 'setprop_from_sysfs' r=0
1730[ 24.377025] init: command 'setprop_from_sysfs' r=0
1731[ 24.377098] init: command 'setprop_from_sysfs' r=0
1732[ 24.377169] init: command 'setprop_from_sysfs' r=0
1733[ 24.377218] init: cannot find '/sbin/intel_fw_props', disabling 'intel_fw_props'
1734[ 24.380975] init: command 'start' r=0
1735[ 24.381009] init: processing action 0x9b25bf0 (boot)
1736[ 24.381085] init: command 'write' r=0
1737[ 24.381129] init: command 'setprop' r=0
1738[ 24.381158] init: processing action 0x9b26590 (boot)
1739[ 24.381183] init: command 'setprop' r=0
1740[ 24.381210] init: command 'setprop' r=0
1741[ 24.381418] init: starting 'wlan_prov'
1742[ 24.381612] init: command 'start' r=0
1743[ 24.381677] init: command 'insmod' r=-1
1744[ 24.381721] init: processing action 0x9b27990 (boot)
1745[ 24.381782] init: command 'chown' r=-2
1746[ 24.382165] init: command 'chmod' r=-2
1747[ 24.382222] init: command 'chmod' r=-2
1748[ 24.382273] init: command 'chmod' r=-2
1749[ 24.382325] init: command 'chmod' r=-2
1750[ 24.382377] init: command 'chmod' r=-2
1751[ 24.382400] init: processing action 0x9b29310 (boot)
1752[ 24.382459] init: command 'chmod' r=0
1753[ 24.382521] init: command 'chown' r=0
1754[ 24.382579] init: command 'chown' r=0
1755[ 24.382636] init: command 'chown' r=0
1756[ 24.382696] init: command 'chown' r=0
1757[ 24.382754] init: command 'chown' r=0
1758[ 24.382815] init: command 'chown' r=0
1759[ 24.382874] init: command 'chown' r=0
1760[ 24.382932] init: command 'chown' r=0
1761[ 24.382996] init: command 'chown' r=0
1762[ 24.383054] init: command 'chown' r=0
1763[ 24.383112] init: command 'chmod' r=0
1764[ 24.383168] init: command 'chmod' r=0
1765[ 24.383224] init: command 'chmod' r=0
1766[ 24.383279] init: command 'chmod' r=0
1767[ 24.383334] init: command 'chmod' r=0
1768[ 24.383389] init: command 'chmod' r=0
1769[ 24.383445] init: command 'chmod' r=0
1770[ 24.383500] init: command 'chmod' r=0
1771[ 24.383561] init: command 'chmod' r=0
1772[ 24.383617] init: command 'chmod' r=0
1773[ 24.411516] init: command 'chown' r=0
1774[ 24.441474] init: command 'chmod' r=0
1775[ 24.441523] init: processing action 0x9b29a10 (queue_property_triggers)
1776[ 24.441591] init: command 'queue_property_triggers' r=0
1777[ 24.441612] init: processing action 0x9b19be0 (ready)
1778[ 24.441757] init: starting 'droid_init_done'
1779[ 24.441957] init: command 'class_start' r=0
1780[ 24.442001] init: processing action 0x9b183e0 (property:sys.powerctl=*)
1781[ 24.442019] init: property 'sys.powerctl' doesn't exist while expanding '${sys.powerctl}'
1782[ 24.445762] init: powerctl: cannot expand '${sys.powerctl}'
1783[ 24.449281] init: command 'powerctl' r=-22
1784[ 24.449368] init: processing action 0x9b26e50 (property:ro.product.name=*)
1785[ 24.449390] init: command 'setprop' r=0
1786[ 24.449411] init: processing action 0x9b28550 (property:ro.spid.gps.tty=ttyMFD1)
1787[ 24.453067] DW HSU: Can't find LPIO1 DMA controller by PCI, try ACPI
1788[ 24.463646] init: command 'chmod' r=0
1789[ 24.463926] DW HSU: Can't find LPIO1 DMA controller by PCI, try ACPI
1790[ 24.464984] init: command 'chown' r=0
1791[ 24.465084] init: command 'chmod' r=0
1792[ 24.465167] init: command 'chown' r=0
1793[ 24.465255] init: command 'write' r=0
1794[ 24.465329] init: command 'mkdir' r=0
1795[ 24.465370] init: command 'symlink' r=0
1796[ 24.465408] init: command 'symlink' r=0
1797[ 24.506449] init: waitpid returned pid 378, status = 00007f00
1798[ 24.506470] init: process 'baytrail-setup', pid 378 exited
1799[ 24.506561] init: waitpid returned pid 379, status = 00007f00
1800[ 24.506570] init: process 'net_eth0-start', pid 379 exited
1801[ 24.512768] binder: 376:376 transaction failed 29189, size 0-0
1802[ 24.524595] init: waitpid returned pid 387, status = 00000000
1803[ 24.524619] init: process 'enable_houdini', pid 387 exited
1804[ 24.732283] init: waitpid returned pid 380, status = 00000000
1805[ 24.732332] init: process 'rfkill_bt', pid 380 exited
1806[ 24.835026] init: waitpid returned pid 375, status = 00000000
1807[ 24.835088] init: process 'fg_conf', pid 375 exited
1808[ 24.857840] init: waitpid returned pid 389, status = 0000ff00
1809[ 24.857912] init: process 'gpscerd', pid 389 exited
1810[ 24.967003] atomisp-css2400b0_v21 0000:00:03.0: DFS target frequency=200.
1811[ 24.978628] atomisp-css2400b0_v21 0000:00:03.0: DFS target frequency=200.
1812[ 25.012773] atomisp-css2400b0_v21 0000:00:03.0: DFS target frequency=200.
1813[ 25.031486] atomisp-css2400b0_v21 0000:00:03.0: DFS target frequency=200.
1814[ 26.681463] init: waitpid returned pid 392, status = 00000000
1815[ 26.681528] init: process 'droid_init_done', pid 392 exited
1816[ 39.761615] mei_txe 0000:00:1a.0: failed mei_ioctl_connect_client
1817[ 39.774703] mei_txe 0000:00:1a.0: failed mei_ioctl_connect_client
1818[ 39.774747] init: waitpid returned pid 369, status = 00000000
1819[ 39.774781] init: process 'bd_prov', pid 369 exited
1820[ 40.018615] init: waitpid returned pid 391, status = 00000000
1821[ 40.018681] init: process 'wlan_prov', pid 391 exited
1822[ 49.263336] init: processing action 0x9b180c0 (property:droid.late_start=trigger_late_start)
1823[ 49.263373] init: cannot find '/system/bin/sdcard', disabling 'sdcard'
1824[ 49.263384] init: command 'class_start' r=0
1825[ 49.662080] bcm_bt_lpm OBDA8723:00: Error evaluating UART port number
1826[ 49.666491] gpio-keys gpio-lesskey.1.auto: Failed to request GPIO 222, error -517
1827[ 49.670645] platform gpio-lesskey.1.auto: Driver gpio-keys requests probe deferral
1828[ 49.670701] gpio-keys gpio-lesskey.2.auto: Failed to request GPIO 295, error -517
1829[ 49.675080] platform gpio-lesskey.2.auto: Driver gpio-keys requests probe deferral
1830[ 55.109609] snd_intel_sst: runtime_resume called
1831[ 55.141869] snd_intel_sst: GOT table entry invalid
1832[ 55.150385] snd_intel_sst: FW Version 02.08.0a.08
1833[ 55.150394] snd_intel_sst: Build date May 23 2014 Time 15:14:30
1834[ 57.531356] init: processing action 0x9b24100 (property:sys.boot_completed=1)
1835[ 57.531460] init: starting 'wdogcounter'
1836[ 57.531625] init: command 'start' r=0
1837[ 57.549238] init: waitpid returned pid 701, status = 00000000
1838[ 57.549248] init: process 'wdogcounter', pid 701 exited
1839[ 59.591474] snd_intel_sst: runtime_suspend called
1840[ 62.962132] trigger_algo:Algo_status:2
1841[ 63.254589] healthd: battery l=33 v=3745 t=35.0 h=2 st=3 c=-784 chg=
1842[ 63.394895] healthd: battery l=33 v=3745 t=35.0 h=2 st=3 c=-784 chg=
1843[ 123.121923] trigger_algo:Algo_status:2
1844[ 123.439940] healthd: battery l=33 v=3744 t=34.0 h=2 st=3 c=-784 chg=
1845[ 123.520484] healthd: battery l=33 v=3744 t=34.0 h=2 st=3 c=-784 chg=
1846[ 183.283763] trigger_algo:Algo_status:2
1847[ 183.428448] healthd: battery l=33 v=3742 t=33.0 h=2 st=3 c=-784 chg=
1848[ 183.673129] healthd: battery l=33 v=3742 t=33.0 h=2 st=3 c=-784 chg=
1849[ 243.443581] trigger_algo:Algo_status:2
1850[ 243.760478] healthd: battery l=33 v=3738 t=32.0 h=2 st=3 c=-784 chg=
1851[ 243.844813] healthd: battery l=33 v=3738 t=32.0 h=2 st=3 c=-784 chg=