· 9 years ago · Nov 06, 2016, 07:16 PM
1<6>[ 0.000000 / 01-01 00:00:00.000][0] Initializing cgroup subsys cpu
2<6>[ 0.000000 / 01-01 00:00:00.000][0] Initializing cgroup subsys cpuacct
3<5>[ 0.000000 / 01-01 00:00:00.000][0] Linux version 3.18.31-twrp-h918-1.0 (jc@westerley) (gcc version 6.1.1 20160711 (Linaro GCC 6.1-2016.08) ) #1 SMP PREEMPT Sun Nov 6 12:43:11 EST 2016
4<4>[ 0.000000 / 01-01 00:00:00.000][0] CPU: AArch64 Processor [511f2112] revision 2
5<6>[ 0.000000 / 01-01 00:00:00.000][0] alternatives: detected feature GIC system register CPU interface
6<6>[ 0.000000 / 01-01 00:00:00.000][0] L1_CACHE_BYTES (128) Cache Writeback Granule (128)
7<6>[ 0.000000 / 01-01 00:00:00.000][0] Machine: Qualcomm Technologies, Inc. MSM 8996 v3.x + PMI8996 MTP
8<6>[ 0.000000 / 01-01 00:00:00.000][0] efi: Getting EFI parameters from FDT:
9<6>[ 0.000000 / 01-01 00:00:00.000][0] efi: UEFI not found.
10<6>[ 0.000000 / 01-01 00:00:00.000][0] Reserved memory: reserved region for node 'removed_regions@85800000': base 0x0000000085800000, size 40 MiB
11<6>[ 0.000000 / 01-01 00:00:00.000][0] Reserved memory: reserved region for node 'peripheral_region@8e900000': base 0x000000008e900000, size 45 MiB
12<6>[ 0.000000 / 01-01 00:00:00.000][0] Reserved memory: reserved region for node 'modem_region@88800000': base 0x0000000088000000, size 105 MiB
13<6>[ 0.000000 / 01-01 00:00:00.000][0] Reserved memory: reserved region for node 'cont_splash_mem_hdmi@b1c00000': base 0x00000000b1c00000, size 35 MiB
14<6>[ 0.000000 / 01-01 00:00:00.000][0] Reserved memory: reserved region for node 'ramoops_region@c0000000': base 0x00000000c0000000, size 1 MiB
15<6>[ 0.000000 / 01-01 00:00:00.000][0] Reserved memory: reserved region for node 'crash_fb_mem@c0100000': base 0x00000000c0100000, size 12 MiB
16<6>[ 0.000000 / 01-01 00:00:00.000][0] Removed memory: created DMA memory pool at 0x0000000085800000, size 40 MiB
17<6>[ 0.000000 / 01-01 00:00:00.000][0] Reserved memory: initialized node removed_regions@85800000, compatible id removed-dma-pool
18<6>[ 0.000000 / 01-01 00:00:00.000][0] Removed memory: created DMA memory pool at 0x000000008e900000, size 45 MiB
19<6>[ 0.000000 / 01-01 00:00:00.000][0] Reserved memory: initialized node peripheral_region@8e900000, compatible id removed-dma-pool
20<6>[ 0.000000 / 01-01 00:00:00.000][0] Reserved memory: allocated memory for 'adsp_region' node: base 0x00000000ff800000, size 4 MiB
21<6>[ 0.000000 / 01-01 00:00:00.000][0] Reserved memory: created CMA memory pool at 0x00000000ff800000, size 4 MiB
22<6>[ 0.000000 / 01-01 00:00:00.000][0] Reserved memory: initialized node adsp_region, compatible id shared-dma-pool
23<6>[ 0.000000 / 01-01 00:00:00.000][0] Reserved memory: allocated memory for 'qseecom_region' node: base 0x00000000fe400000, size 20 MiB
24<6>[ 0.000000 / 01-01 00:00:00.000][0] Reserved memory: created CMA memory pool at 0x00000000fe400000, size 20 MiB
25<6>[ 0.000000 / 01-01 00:00:00.000][0] Reserved memory: initialized node qseecom_region, compatible id shared-dma-pool
26<6>[ 0.000000 / 01-01 00:00:00.000][0] Reserved memory: allocated memory for 'secure_region' node: base 0x00000000f8800000, size 92 MiB
27<6>[ 0.000000 / 01-01 00:00:00.000][0] Reserved memory: created CMA memory pool at 0x00000000f8800000, size 92 MiB
28<6>[ 0.000000 / 01-01 00:00:00.000][0] Reserved memory: initialized node secure_region, compatible id shared-dma-pool
29<6>[ 0.000000 / 01-01 00:00:00.000][0] Removed memory: created DMA memory pool at 0x0000000088000000, size 105 MiB
30<6>[ 0.000000 / 01-01 00:00:00.000][0] Reserved memory: initialized node modem_region@88800000, compatible id removed-dma-pool
31<6>[ 0.000000 / 01-01 00:00:00.000][0] Removed memory: created DMA memory pool at 0x00000000c0000000, size 1 MiB
32<6>[ 0.000000 / 01-01 00:00:00.000][0] Reserved memory: initialized node ramoops_region@c0000000, compatible id removed-dma-pool
33<6>[ 0.000000 / 01-01 00:00:00.000][0] cma: Reserved 32 MiB at 0x00000000f6800000
34<7>[ 0.000000 / 01-01 00:00:00.000][0] On node 0 totalpages: 992848
35<7>[ 0.000000 / 01-01 00:00:00.000][0] DMA zone: 7428 pages used for memmap
36<7>[ 0.000000 / 01-01 00:00:00.000][0] DMA zone: 0 pages reserved
37<7>[ 0.000000 / 01-01 00:00:00.000][0] DMA zone: 475392 pages, LIFO batch:31
38<7>[ 0.000000 / 01-01 00:00:00.000][0] Normal zone: 8086 pages used for memmap
39<7>[ 0.000000 / 01-01 00:00:00.000][0] Normal zone: 517456 pages, LIFO batch:31
40<6>[ 0.000000 / 01-01 00:00:00.000][0] psci: probing for conduit method from DT.
41<6>[ 0.000000 / 01-01 00:00:00.000][0] psci: PSCIv1.0 detected in firmware.
42<6>[ 0.000000 / 01-01 00:00:00.000][0] psci: Using standard PSCI v0.2 function IDs
43<6>[ 0.000000 / 01-01 00:00:00.000][0] psci: Initializing psci_cpu_init
44<6>[ 0.000000 / 01-01 00:00:00.000][0] psci: Initializing psci_cpu_init
45<6>[ 0.000000 / 01-01 00:00:00.000][0] psci: Initializing psci_cpu_init
46<6>[ 0.000000 / 01-01 00:00:00.000][0] PERCPU: Embedded 13 pages/cpu @ffffffc0fe318000 s22144 r0 d31104 u53248
47<7>[ 0.000000 / 01-01 00:00:00.000][0] pcpu-alloc: s22144 r0 d31104 u53248 alloc=13*4096
48<7>[ 0.000000 / 01-01 00:00:00.000][0] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3
49<4>[ 0.000000 / 01-01 00:00:00.000][0] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 977334
50<6>[ 0.000000 / 01-01 00:00:00.000][0] [LGE-HW_REV] board_revno_setup : [LGE-HW-REV] Rev.rev_10
51<6>[ 0.000000 / 01-01 00:00:00.000][0] CCMODE: CC mode disabled
52<6>[ 0.000000 / 01-01 00:00:00.000][0] LGE BOOT REASON: 0x77665502
53<6>[ 0.000000 / 01-01 00:00:00.000][0] [LGE-CD] boot_cable_setup : Boot cable : 400MA 8
54<6>[ 0.000000 / 01-01 00:00:00.000][0] [LGE-BATT-ID] battery_information_setup : Battery : SW3800_VC0 187
55<4>[ 0.000000 / 01-01 00:00:00.000][0] androidboot.dlcomplete = 0
56<6>[ 0.000000 / 01-01 00:00:00.000][0] PID hash table entries: 4096 (order: 3, 32768 bytes)
57<6>[ 0.000000 / 01-01 00:00:00.000][0] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
58<6>[ 0.000000 / 01-01 00:00:00.000][0] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
59<4>[ 0.000000 / 01-01 00:00:00.000][0] Memory: 3666452K/3971392K available (12740K kernel code, 1636K rwdata, 5592K rodata, 508K init, 2544K bss, 304940K reserved)
60<5>[ 0.000000 / 01-01 00:00:00.000][0] Virtual kernel memory layout:
61<5>[ 0.000000 / 01-01 00:00:00.000][0] vmalloc : 0xffffff8000000000 - 0xffffffbdbfff0000 ( 246 GB)
62<5>[ 0.000000 / 01-01 00:00:00.000][0] vmemmap : 0xffffffbdc0000000 - 0xffffffbfc0000000 ( 8 GB maximum)
63<5>[ 0.000000 / 01-01 00:00:00.000][0] 0xffffffbdc0000000 - 0xffffffbdc3f95400 ( 63 MB actual)
64<5>[ 0.000000 / 01-01 00:00:00.000][0] PCI I/O : 0xffffffbffa000000 - 0xffffffbffb000000 ( 16 MB)
65<5>[ 0.000000 / 01-01 00:00:00.000][0] fixed : 0xffffffbffbdfd000 - 0xffffffbffbdff000 ( 8 KB)
66<5>[ 0.000000 / 01-01 00:00:00.000][0] modules : 0xffffffbffc000000 - 0xffffffc000000000 ( 64 MB)
67<5>[ 0.000000 / 01-01 00:00:00.000][0] memory : 0xffffffc000000000 - 0xffffffc0fe550000 ( 4069 MB)
68<5>[ 0.000000 / 01-01 00:00:00.000][0] .init : 0xffffffc00126a000 - 0xffffffc0012e9000 ( 508 KB)
69<6>[ 0.000000 / 01-01 00:00:00.000][0] SLUB: HWalign=128, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
70<6>[ 0.000000 / 01-01 00:00:00.000][0] HMP scheduling enabled.
71<6>[ 0.000000 / 01-01 00:00:00.000][0] Preemptible hierarchical RCU implementation.
72<6>[ 0.000000 / 01-01 00:00:00.000][0] RCU dyntick-idle grace-period acceleration is enabled.
73<6>[ 0.000000 / 01-01 00:00:00.000][0] NR_IRQS:64 nr_irqs:64 0
74<6>[ 0.000000 / 01-01 00:00:00.000][0] CPU0: found redistributor 0 region 0:0x0000000009c00000
75<4>[ 0.000000 / 01-01 00:00:00.000][0] mpm_init_irq_domain(): Cannot find irq controller for qcom,gpio-parent
76<3>[ 0.000000 / 01-01 00:00:00.000][0] MPM 1 irq mapping errored -517
77<6>[ 0.000000 / 01-01 00:00:00.000][0] Architected cp15 and mmio timer(s) running at 19.20MHz (virt/virt).
78<6>[ 0.000004 / 01-01 00:00:00.000][0] sched_clock: 56 bits at 19MHz, resolution 52ns, wraps every 3579139424256ns
79<6>[ 0.000021 / 01-01 00:00:00.000][0] Switched to clocksource arch_sys_counter
80<6>[ 0.000845 / 01-01 00:00:00.000][0] Calibrating delay loop (skipped), value calculated using timer frequency.. 38.40 BogoMIPS (lpj=192000)
81<6>[ 0.000861 / 01-01 00:00:00.000][0] pid_max: default: 32768 minimum: 301
82<6>[ 0.001754 / 01-01 00:00:00.000][0] Security Framework initialized
83<6>[ 0.001773 / 01-01 00:00:00.000][0] SELinux: Initializing.
84<7>[ 0.001806 / 01-01 00:00:00.000][0] SELinux: Starting in permissive mode
85<6>[ 0.001844 / 01-01 00:00:00.000][0] Mount-cache hash table entries: 8192 (order: 4, 65536 bytes)
86<6>[ 0.001856 / 01-01 00:00:00.000][0] Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes)
87<6>[ 0.002386 / 01-01 00:00:00.000][0] Initializing cgroup subsys freezer
88<6>[ 0.002406 / 01-01 00:00:00.000][0] Initializing cgroup subsys net_cls
89<4>[ 0.002670 / 01-01 00:00:00.000][0] /cpus/cpu@0: Unknown CPU type
90<4>[ 0.002683 / 01-01 00:00:00.000][0] /cpus/cpu@1: Unknown CPU type
91<4>[ 0.002695 / 01-01 00:00:00.000][0] /cpus/cpu@100: Unknown CPU type
92<4>[ 0.002708 / 01-01 00:00:00.000][0] /cpus/cpu@101: Unknown CPU type
93<6>[ 0.002742 / 01-01 00:00:00.000][0] hw perfevents: enabled with arm/armv8-pmuv3 PMU driver, 9 counters available
94<6>[ 0.002767 / 01-01 00:00:00.000][0] EFI services will not be available.
95<4>[ 0.010654 / 01-01 00:00:00.000][0]
96<4>[ 0.010654 / 01-01 00:00:00.000][0] **********************************************************
97<4>[ 0.010669 / 01-01 00:00:00.000][0] ** NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE **
98<4>[ 0.010676 / 01-01 00:00:00.000][0] ** **
99<4>[ 0.010683 / 01-01 00:00:00.000][0] ** trace_printk() being used. Allocating extra memory. **
100<4>[ 0.010690 / 01-01 00:00:00.000][0] ** **
101<4>[ 0.010696 / 01-01 00:00:00.000][0] ** This means that this is a DEBUG kernel and it is **
102<4>[ 0.010703 / 01-01 00:00:00.000][0] ** unsafe for produciton use. **
103<4>[ 0.010709 / 01-01 00:00:00.000][0] ** **
104<4>[ 0.010715 / 01-01 00:00:00.000][0] ** If you see this message and you are not debugging **
105<4>[ 0.010722 / 01-01 00:00:00.000][0] ** the kernel, report this immediately to your vendor! **
106<4>[ 0.010728 / 01-01 00:00:00.000][0] ** **
107<4>[ 0.010734 / 01-01 00:00:00.000][0] ** NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE **
108<4>[ 0.010741 / 01-01 00:00:00.000][0] **********************************************************
109<6>[ 0.011403 / 01-01 00:00:00.000][0] MSM Memory Dump base table set up
110<6>[ 0.011423 / 01-01 00:00:00.000][0] MSM Memory Dump apps data table set up
111<6>[ 0.012661 / 01-01 00:00:00.000][0] panic-handler: reserved[@0xc0100000+@0xc00000)
112<6>[ 0.014320 / 01-01 00:00:00.000][0] clock-cpu-8996: configuring clocks for the perf cluster
113<6>[ 0.014496 / 01-01 00:00:00.000][0] cpu_clock_8996_early_init: finished CPU clock configuration
114<6>[ 0.015896 / 01-01 00:00:00.000][1] CPU1: Booted secondary processor
115<6>[ 0.015920 / 01-01 00:00:00.000][1] CPU1: found redistributor 1 region 0:0x0000000009c40000
116<6>[ 0.018335 / 01-01 00:00:00.000][2] CPU2: Booted secondary processor
117<6>[ 0.018386 / 01-01 00:00:00.000][2] CPU2: found redistributor 100 region 0:0x0000000009c80000
118<6>[ 0.020659 / 01-01 00:00:00.019][3] CPU3: Booted secondary processor
119<6>[ 0.020676 / 01-01 00:00:00.019][3] CPU3: found redistributor 101 region 0:0x0000000009cc0000
120<6>[ 0.020820 / 01-01 00:00:00.019][0] Brought up 4 CPUs
121<6>[ 0.020873 / 01-01 00:00:00.019][0] SMP: Total of 4 processors activated.
122<6>[ 0.023981 / 01-01 00:00:00.019][2] DMI not present or invalid.
123<6>[ 0.031389 / 01-01 00:00:00.029][2] pinctrl core: initialized pinctrl subsystem
124<6>[ 0.031776 / 01-01 00:00:00.029][2] regulator-dummy: no parameters
125<6>[ 0.091737 / 01-01 00:00:00.089][2] NET: Registered protocol family 16
126<6>[ 0.100099 / 01-01 00:00:00.099][2] cpuidle: using governor ladder
127<6>[ 0.160072 / 01-01 00:00:00.159][2] cpuidle: using governor menu
128<6>[ 0.200069 / 01-01 00:00:00.199][2] cpuidle: using governor qcom
129<6>[ 0.201272 / 01-01 00:00:00.199][2] vdso: 2 pages (1 code @ ffffffc00130d000, 1 data @ ffffffc00130c000)
130<6>[ 0.201683 / 01-01 00:00:00.199][2] software IO TLB [mem 0xffc00000-0x100000000] (4MB) mapped at [ffffffc07fc00000-ffffffc07fffffff]
131<6>[ 0.202505 / 01-01 00:00:00.199][2] DMA: preallocated 2048 KiB pool for atomic allocations
132<3>[ 0.202748 / 01-01 00:00:00.199][2] msm_smem_init: unable to create logging context
133<3>[ 0.202787 / 01-01 00:00:00.199][2] msm_smd_init: unable to create SMD logging context
134<3>[ 0.202798 / 01-01 00:00:00.199][2] msm_smd_init: unable to create SMSM logging context
135<3>[ 0.203003 / 01-01 00:00:00.199][2] <CORE> glink_init: unable to create log context
136<3>[ 0.203204 / 01-01 00:00:00.199][2] <CORE> glink_core_register_transport: unable to create log context for [dsps:smd_trans]
137<3>[ 0.203353 / 01-01 00:00:00.199][2] <CORE> glink_core_register_transport: unable to create log context for [lpass:smd_trans]
138<3>[ 0.203485 / 01-01 00:00:00.199][2] <CORE> glink_core_register_transport: unable to create log context for [mpss:smd_trans]
139<3>[ 0.203617 / 01-01 00:00:00.199][2] <CORE> glink_core_register_transport: unable to create log context for [wcnss:smd_trans]
140<3>[ 0.203741 / 01-01 00:00:00.199][2] <CORE> glink_core_register_transport: unable to create log context for [rpm:smd_trans]
141<6>[ 0.215662 / 01-01 00:00:00.209][2] qcom,msm-apm 99e0000.apm: overriding clock sources across APM switch
142<6>[ 0.216576 / 01-01 00:00:00.209][2] sps:sps is ready.
143<6>[ 0.217667 / 01-01 00:00:00.209][2] i2c-msm-v2 757a000.i2c: could not find pctldev for node /soc/pinctrl@01010000/i2c_6/i2c_6_default, deferring probe
144<6>[ 0.217964 / 01-01 00:00:00.209][2] i2c-msm-v2 75b5000.i2c: could not find pctldev for node /soc/pinctrl@01010000/i2c_7/i2c_7_default, deferring probe
145<6>[ 0.218370 / 01-01 00:00:00.209][2] i2c-msm-v2 75b6000.i2c: could not find pctldev for node /soc/pinctrl@01010000/i2c_8/i2c_8_active, deferring probe
146<3>[ 0.220298 / 01-01 00:00:00.219][2] cpu-clock-8996 6400000.qcom,cpu-clock-8996: resources init failed
147<3>[ 0.248534 / 01-01 00:00:00.239][2] smd_channel_probe_now: allocation table not initialized
148<3>[ 0.248816 / 01-01 00:00:00.239][2] smd_channel_probe_now: allocation table not initialized
149<3>[ 0.249103 / 01-01 00:00:00.239][2] smd_channel_probe_now: allocation table not initialized
150<3>[ 0.249380 / 01-01 00:00:00.239][2] smd_channel_probe_now: allocation table not initialized
151<6>[ 0.249634 / 01-01 00:00:00.239][2] msm_watchdog 9830000.qcom,wdt: wdog absent resource not present
152<6>[ 0.249897 / 01-01 00:00:00.239][2] msm_watchdog 9830000.qcom,wdt: MSM Watchdog Initialized
153<6>[ 0.250643 / 01-01 00:00:00.249][2] msm_rpm_dev_probe: APSS-RPM communication over GLINK
154<3>[ 0.258972 / 01-01 00:00:00.249][2] spmi_pmic_arb 400f000.qcom,spmi: PMIC Arb Version-2 0x20010000
155<3>[ 0.260549 / 01-01 00:00:00.259][2] spmi_pmic_arb 400f000.qcom,spmi: missing property: qcom,pmic-arb-max-periph-interrupts
156<6>[ 0.265612 / 01-01 00:00:00.259][2] pmi8994_s2: 400 <--> 1015 mV at 570 mV normal idle
157<6>[ 0.266231 / 01-01 00:00:00.259][2] platform 9300000.qcom,lpass: assigned reserved memory node peripheral_region@8e900000
158<6>[ 0.266528 / 01-01 00:00:00.259][2] platform ce0000.qcom,venus: assigned reserved memory node peripheral_region@8e900000
159<6>[ 0.266851 / 01-01 00:00:00.259][2] platform 1c00000.qcom,ssc: assigned reserved memory node peripheral_region@8e900000
160<6>[ 0.267222 / 01-01 00:00:00.259][2] platform 2080000.qcom,mss: assigned reserved memory node modem_region@88800000
161<6>[ 0.269889 / 01-01 00:00:00.259][2] msm-thermal 70000.qcom,msm-thermal: probe_vdd_mx:Failed reading node=/soc/qcom,msm-thermal, key=qcom,mx-restriction-temp. KTM continues
162<6>[ 0.269961 / 01-01 00:00:00.259][2] msm_thermal:vdd_restriction_reg_init Defer regulator vdd-dig probe
163<3>[ 0.269974 / 01-01 00:00:00.259][2] msm_thermal:probe_vdd_rstr Err regulator init. err:-517. KTM continues.
164<6>[ 0.269988 / 01-01 00:00:00.259][2] msm-thermal 70000.qcom,msm-thermal: probe_vdd_rstr:Failed reading node=/soc/qcom,msm-thermal, key=qcom,max-freq-level. err=-517. KTM continues
165<3>[ 0.270000 / 01-01 00:00:00.259][2] msm_thermal:msm_thermal_dev_probe Failed reading node=/soc/qcom,msm-thermal, key=qcom,online-hotplug-core. err:-517
166<6>[ 0.274991 / 01-01 00:00:00.269][2] platform soc:qcom,msm-adsprpc-mem: assigned reserved memory node adsp_region
167<3>[ 0.276018 / 01-01 00:00:00.269][2] <CORE> glink_core_register_transport: unable to create log context for [mpss:smem]
168<3>[ 0.276716 / 01-01 00:00:00.269][2] <CORE> glink_core_register_transport: unable to create log context for [lpass:smem]
169<3>[ 0.277422 / 01-01 00:00:00.269][2] <CORE> glink_core_register_transport: unable to create log context for [dsps:smem]
170<3>[ 0.278004 / 01-01 00:00:00.269][2] <CORE> glink_core_register_transport: unable to create log context for [rpm:smem]
171<3>[ 0.278225 / 01-01 00:00:00.269][0] smd_channel_probe_now: allocation table not initialized
172<6>[ 0.278554 / 01-01 00:00:00.269][3] msm_rpm_trans_notify_state: glink config params: transport=(null), edge=rpm, name=rpm_requests
173<6>[ 0.279123 / 01-01 00:00:00.269][2] msm_cache_erp64 6500000.qcom,cache_erp64: Registering for L1 error interrupts
174<6>[ 0.279227 / 01-01 00:00:00.269][2] msm_cache_erp64 6500000.qcom,cache_erp64: Registering for L2 error interrupts
175<6>[ 0.279394 / 01-01 00:00:00.269][2] msm_cache_erp64 6500000.qcom,cache_erp64: Registering for L3 error interrupts
176<6>[ 0.279669 / 01-01 00:00:00.269][2] msm_m4m_erp 9a40000.qcom,m4m_erp64: Registering for M4M error interrupts
177<6>[ 0.281682 / 01-01 00:00:00.279][2] apc0_pwrcl_mem_acc_corner: 0 <--> 0 mV
178<6>[ 0.282038 / 01-01 00:00:00.279][2] apc1_perfcl_mem_acc_corner: 0 <--> 0 mV
179<6>[ 0.282392 / 01-01 00:00:00.279][2] apcc_l3_mem_acc_corner: 0 <--> 0 mV
180<6>[ 0.282736 / 01-01 00:00:00.279][2] gfx_mem_acc_corner: 0 <--> 0 mV
181<6>[ 0.283148 / 01-01 00:00:00.279][2] kryo0-retention: 468 <--> 892 mV at 520 mV
182<6>[ 0.283360 / 01-01 00:00:00.279][2] kryo0: 468 <--> 892 mV at 754 mV
183<6>[ 0.283504 / 01-01 00:00:00.279][2] kryo_regulator_probe: kryo0: default LDO functional volt=754021 uV, LDO retention volt=521789 uV, Vref func=325285 + 4466*(val), cluster-num=0
184<6>[ 0.283808 / 01-01 00:00:00.279][2] kryo1-retention: 468 <--> 892 mV at 520 mV
185<6>[ 0.284016 / 01-01 00:00:00.279][2] kryo1: 468 <--> 892 mV at 754 mV
186<6>[ 0.284166 / 01-01 00:00:00.279][2] kryo_regulator_probe: kryo1: default LDO functional volt=754021 uV, LDO retention volt=521789 uV, Vref func=325285 + 4466*(val), cluster-num=1
187<6>[ 0.288699 / 01-01 00:00:00.279][2] platform soc:qcom,kgsl-hyp: assigned reserved memory node peripheral_region@8e900000
188<3>[ 0.290131 / 01-01 00:00:00.289][2] msm_mpm_dev_probe(): Cannot get clk resource for XO: -517
189<4>[ 0.309354 / 01-01 00:00:00.299][2] __of_mpm_init(): MPM driver mapping exists
190<6>[ 0.314561 / 01-01 00:00:00.309][2] console [pstore-1] enabled
191<6>[ 0.314575 / 01-01 00:00:00.309][2] pstore: Registered ramoops as persistent store backend
192<6>[ 0.314587 / 01-01 00:00:00.309][2] ramoops: attached 0x80000@0xc0000000, ecc: 0/0
193<6>[ 0.316122 / 01-01 00:00:00.309][2] i2c-msm-v2 7577000.i2c: probing driver i2c-msm-v2
194<3>[ 0.316215 / 01-01 00:00:00.309][2] i2c-msm-v2 7577000.i2c: error on clk_get(core_clk):-517
195<3>[ 0.316233 / 01-01 00:00:00.309][2] i2c-msm-v2 7577000.i2c: error probe() failed with err:-517
196<6>[ 0.317697 / 01-01 00:00:00.309][0] i2c-msm-v2 757a000.i2c: probing driver i2c-msm-v2
197<3>[ 0.317802 / 01-01 00:00:00.309][0] i2c-msm-v2 757a000.i2c: error on clk_get(core_clk):-517
198<3>[ 0.317820 / 01-01 00:00:00.309][0] i2c-msm-v2 757a000.i2c: error probe() failed with err:-517
199<6>[ 0.318485 / 01-01 00:00:00.309][0] i2c-msm-v2 75b5000.i2c: probing driver i2c-msm-v2
200<3>[ 0.318584 / 01-01 00:00:00.309][0] i2c-msm-v2 75b5000.i2c: error on clk_get(core_clk):-517
201<3>[ 0.318601 / 01-01 00:00:00.309][0] i2c-msm-v2 75b5000.i2c: error probe() failed with err:-517
202<6>[ 0.319224 / 01-01 00:00:00.309][0] i2c-msm-v2 75b6000.i2c: probing driver i2c-msm-v2
203<3>[ 0.319338 / 01-01 00:00:00.309][0] i2c-msm-v2 75b6000.i2c: error on clk_get(core_clk):-517
204<3>[ 0.319355 / 01-01 00:00:00.309][0] i2c-msm-v2 75b6000.i2c: error probe() failed with err:-517
205<3>[ 0.319581 / 01-01 00:00:00.309][0] cpu-clock-8996 6400000.qcom,cpu-clock-8996: resources init failed
206<6>[ 0.320499 / 01-01 00:00:00.319][0] pm8994_s1_corner: 0 <--> 0 mV at 0 mV normal idle
207<6>[ 0.320997 / 01-01 00:00:00.319][0] pm8994_s1_floor_corner: 0 <--> 0 mV at 0 mV normal idle
208<6>[ 0.321421 / 01-01 00:00:00.319][0] pm8994_s1_corner_ao: 0 <--> 0 mV at 0 mV normal idle
209<6>[ 0.321908 / 01-01 00:00:00.319][0] pm8994_s2_corner: 0 <--> 0 mV at 0 mV normal idle
210<6>[ 0.322318 / 01-01 00:00:00.319][0] pm8994_s2_corner_ao: 0 <--> 0 mV at 0 mV normal idle
211<6>[ 0.322790 / 01-01 00:00:00.319][0] pm8994_s3: 1300 mV normal idle
212<6>[ 0.323243 / 01-01 00:00:00.319][0] pm8994_s4: 1800 mV normal idle
213<6>[ 0.323717 / 01-01 00:00:00.319][0] pm8994_s5: 2150 mV normal idle
214<6>[ 0.324177 / 01-01 00:00:00.319][0] pm8994_s7: 800 mV normal idle
215<6>[ 0.324645 / 01-01 00:00:00.319][0] pm8994_l1: 1000 mV normal idle
216<6>[ 0.325100 / 01-01 00:00:00.319][0] pm8994_l2: 1250 mV normal idle
217<6>[ 0.325843 / 01-01 00:00:00.319][0] pm8994_l3: 1050 mV normal idle
218<6>[ 0.326313 / 01-01 00:00:00.319][0] pm8994_l4: 1225 mV normal idle
219<6>[ 0.326794 / 01-01 00:00:00.319][0] pm8994_l6: 1200 mV normal idle
220<6>[ 0.327249 / 01-01 00:00:00.319][0] pm8994_l8: 1800 mV normal idle
221<6>[ 0.327715 / 01-01 00:00:00.319][0] pm8994_l9: 1800 mV normal idle
222<6>[ 0.328176 / 01-01 00:00:00.319][0] pm8994_l10: 1800 mV normal idle
223<6>[ 0.328652 / 01-01 00:00:00.319][0] pm8994_l11: 1200 mV normal idle
224<6>[ 0.329119 / 01-01 00:00:00.319][0] pm8994_l12: 1800 mV normal idle
225<6>[ 0.330017 / 01-01 00:00:00.319][0] pm8994_l13: 1800 <--> 2950 mV at 2950 mV normal idle
226<6>[ 0.330557 / 01-01 00:00:00.329][0] pm8994_l14: 1800 mV normal idle
227<6>[ 0.331455 / 01-01 00:00:00.329][0] pm8994_l15: 1800 mV normal idle
228<6>[ 0.331938 / 01-01 00:00:00.329][0] pm8994_l16: 2700 mV normal idle
229<6>[ 0.332393 / 01-01 00:00:00.329][0] pm8994_l17: 2800 mV normal idle
230<6>[ 0.333195 / 01-01 00:00:00.329][0] pm8994_l18: 2200 mV normal idle
231<6>[ 0.333640 / 01-01 00:00:00.329][0] pm8994_l18_pin_ctrl: 2700 <--> 2900 mV at 2700 mV normal idle
232<6>[ 0.334106 / 01-01 00:00:00.329][0] pm8994_l19: 3000 mV normal idle
233<6>[ 0.334570 / 01-01 00:00:00.329][0] pm8994_l20: 2950 mV normal idle
234<6>[ 0.335026 / 01-01 00:00:00.329][0] pm8994_l21: 2950 mV normal idle
235<6>[ 0.335883 / 01-01 00:00:00.329][0] pm8994_l22: 3300 mV normal idle
236<6>[ 0.336388 / 01-01 00:00:00.329][0] pm8994_l23: 2800 mV normal idle
237<6>[ 0.336880 / 01-01 00:00:00.329][0] pm8994_l24: 3075 mV normal idle
238<6>[ 0.337355 / 01-01 00:00:00.329][0] pm8994_l25: 1200 mV normal idle
239<6>[ 0.338182 / 01-01 00:00:00.329][0] pm8994_l26_corner: 0 <--> 0 mV at 0 mV normal idle
240<6>[ 0.338603 / 01-01 00:00:00.329][0] pm8994_l26_floor_corner: 0 <--> 0 mV at 0 mV normal idle
241<6>[ 0.339089 / 01-01 00:00:00.329][0] pm8994_l27: 1000 mV normal idle
242<6>[ 0.339567 / 01-01 00:00:00.329][0] pm8994_l28: 925 mV normal idle
243<6>[ 0.340416 / 01-01 00:00:00.339][0] pm8994_l29: 2800 mV normal idle
244<6>[ 0.340911 / 01-01 00:00:00.339][0] pm8994_l30: 1800 mV normal idle
245<6>[ 0.341382 / 01-01 00:00:00.339][0] pm8994_l32: 1800 mV normal idle
246<6>[ 0.341831 / 01-01 00:00:00.339][0] pm8994_lvs1: no parameters
247<6>[ 0.342262 / 01-01 00:00:00.339][0] pm8994_lvs2: no parameters
248<6>[ 0.342690 / 01-01 00:00:00.339][0] pmi8994_s1: 1025 mV normal idle
249<6>[ 0.343158 / 01-01 00:00:00.339][0] pmi8994_boost_5v: no parameters
250<3>[ 0.343337 / 01-01 00:00:00.339][0] qcom,rpm-smd-regulator soc:qcom,rpm-smd:rpm-regulator-bstb:regulator-bst: Failed to find supply parent
251<3>[ 0.343447 / 01-01 00:00:00.339][0] rpm_vreg_device_probe: regulator_register failed: pmi8994_boost_5v, rc=-517
252<6>[ 0.343792 / 01-01 00:00:00.339][0] pmi8994_boost_pin_ctrl: no parameters
253<3>[ 0.343874 / 01-01 00:00:00.339][0] qcom,rpm-smd-regulator soc:qcom,rpm-smd:rpm-regulator-bstb:regulator-bst-pin-ctrl: Failed to find supply parent
254<3>[ 0.343967 / 01-01 00:00:00.339][0] rpm_vreg_device_probe: regulator_register failed: pmi8994_boost_pin_ctrl, rc=-517
255<6>[ 0.344369 / 01-01 00:00:00.339][0] pmi8994_boostbypass: 3150 <--> 3600 mV at 3150 mV normal idle
256<6>[ 0.344734 / 01-01 00:00:00.339][0] pm8994_s11: 470 <--> 1140 mV at 905 mV normal idle
257<6>[ 0.344977 / 01-01 00:00:00.339][0] pm8994_s11_avs_limit: 470 <--> 1140 mV
258<6>[ 0.345095 / 01-01 00:00:00.339][0] spm_regulator_probe: name=pm8994_s11, range=LV, voltage=905000 uV, mode=AUTO, step rate=2400 uV/us
259<6>[ 0.346268 / 01-01 00:00:00.339][0] msm_thermal:sensor_mgr_init_threshold threshold id already initialized
260<6>[ 0.346307 / 01-01 00:00:00.339][0] msm-thermal 70000.qcom,msm-thermal: probe_vdd_mx:Failed reading node=/soc/qcom,msm-thermal, key=qcom,mx-restriction-temp. KTM continues
261<6>[ 0.346726 / 01-01 00:00:00.339][0] msm_thermal:vdd_restriction_reg_init Defer regulator vdd-gfx probe
262<3>[ 0.346748 / 01-01 00:00:00.339][0] msm_thermal:probe_vdd_rstr Err regulator init. err:-517. KTM continues.
263<6>[ 0.346766 / 01-01 00:00:00.339][0] msm-thermal 70000.qcom,msm-thermal: probe_vdd_rstr:Failed reading node=/soc/qcom,msm-thermal, key=qcom,max-freq-level. err=-517. KTM continues
264<3>[ 0.346782 / 01-01 00:00:00.339][0] msm_thermal:msm_thermal_dev_probe Failed reading node=/soc/qcom,msm-thermal, key=qcom,online-hotplug-core. err:-517
265<3>[ 0.347329 / 01-01 00:00:00.339][0] msm_mpm_dev_probe(): Cannot get clk resource for XO: -517
266<6>[ 0.347792 / 01-01 00:00:00.339][0] i2c-msm-v2 7577000.i2c: probing driver i2c-msm-v2
267<3>[ 0.347899 / 01-01 00:00:00.339][0] i2c-msm-v2 7577000.i2c: error on clk_get(core_clk):-517
268<3>[ 0.347918 / 01-01 00:00:00.339][0] i2c-msm-v2 7577000.i2c: error probe() failed with err:-517
269<6>[ 0.348549 / 01-01 00:00:00.339][0] i2c-msm-v2 757a000.i2c: probing driver i2c-msm-v2
270<3>[ 0.348644 / 01-01 00:00:00.339][0] i2c-msm-v2 757a000.i2c: error on clk_get(core_clk):-517
271<3>[ 0.348662 / 01-01 00:00:00.339][0] i2c-msm-v2 757a000.i2c: error probe() failed with err:-517
272<6>[ 0.349312 / 01-01 00:00:00.339][0] i2c-msm-v2 75b5000.i2c: probing driver i2c-msm-v2
273<3>[ 0.349413 / 01-01 00:00:00.339][0] i2c-msm-v2 75b5000.i2c: error on clk_get(core_clk):-517
274<3>[ 0.349430 / 01-01 00:00:00.339][0] i2c-msm-v2 75b5000.i2c: error probe() failed with err:-517
275<6>[ 0.350140 / 01-01 00:00:00.349][0] i2c-msm-v2 75b6000.i2c: probing driver i2c-msm-v2
276<3>[ 0.350278 / 01-01 00:00:00.349][0] i2c-msm-v2 75b6000.i2c: error on clk_get(core_clk):-517
277<3>[ 0.350296 / 01-01 00:00:00.349][0] i2c-msm-v2 75b6000.i2c: error probe() failed with err:-517
278<3>[ 0.350722 / 01-01 00:00:00.349][0] cpu-clock-8996 6400000.qcom,cpu-clock-8996: resources init failed
279<6>[ 0.370647 / 01-01 00:00:00.359][0] gcc_mss_q6_bimc_axi_clk
280<6>[ 0.370676 / 01-01 00:00:00.359][0] CBCR: 0x80000001
281<4>[ 0.370690 / 01-01 00:00:00.359][0] ------------[ cut here ]------------
282<4>[ 0.370715 / 01-01 00:00:00.359][0] WARNING: CPU: 0 PID: 6 at ../drivers/clk/msm/clock-local2.c:671 branch_clk_halt_check+0x100/0x12c()
283<4>[ 0.370729 / 01-01 00:00:00.359][0] gcc_mss_q6_bimc_axi_clk: status stuck off
284<4>[ 0.370744 / 01-01 00:00:00.359][0] CPU: 0 PID: 6 Comm: kworker/u8:0 Not tainted 3.18.31-twrp-h918-1.0 #1
285<4>[ 0.370759 / 01-01 00:00:00.359][0] Hardware name: Qualcomm Technologies, Inc. MSM 8996 v3.x + PMI8996 MTP (DT)
286<4>[ 0.370779 / 01-01 00:00:00.359][0] Workqueue: deferwq deferred_probe_work_func
287<0>[ 0.370794 / 01-01 00:00:00.359][0] Call trace:
288<4>[ 0.370815 / 01-01 00:00:00.359][0] [<ffffffc0000886c0>] dump_backtrace+0x0/0xf0
289<4>[ 0.370831 / 01-01 00:00:00.359][0] [<ffffffc0000887c4>] show_stack+0x14/0x1c
290<4>[ 0.370849 / 01-01 00:00:00.359][0] [<ffffffc000cce270>] dump_stack+0x84/0xac
291<4>[ 0.370866 / 01-01 00:00:00.359][0] [<ffffffc00009f304>] warn_slowpath_common+0x8c/0xb8
292<4>[ 0.370880 / 01-01 00:00:00.359][0] [<ffffffc00009f3a0>] warn_slowpath_fmt+0x44/0x4c
293<4>[ 0.370894 / 01-01 00:00:00.359][0] [<ffffffc0009df5fc>] branch_clk_halt_check+0x100/0x12c
294<4>[ 0.370908 / 01-01 00:00:00.359][0] [<ffffffc0009e0fd0>] branch_clk_enable+0x100/0x118
295<4>[ 0.370922 / 01-01 00:00:00.359][0] [<ffffffc0009db870>] clk_enable+0x130/0x1a0
296<4>[ 0.370936 / 01-01 00:00:00.359][0] [<ffffffc0009dc358>] __handoff_clk+0x294/0x2e8
297<4>[ 0.370949 / 01-01 00:00:00.359][0] [<ffffffc0009dcb7c>] msm_clock_register+0x1f0/0x22c
298<4>[ 0.370961 / 01-01 00:00:00.359][0] [<ffffffc0009dcc38>] of_msm_clock_register+0x80/0x90
299<4>[ 0.370977 / 01-01 00:00:00.359][0] [<ffffffc0009ec480>] msm_gcc_8996_probe+0x390/0x39c
300<4>[ 0.370991 / 01-01 00:00:00.359][0] [<ffffffc0004f8ed8>] platform_drv_probe+0x38/0x88
301<4>[ 0.371004 / 01-01 00:00:00.359][0] [<ffffffc0004f788c>] driver_probe_device+0x2c0/0x384
302<4>[ 0.371017 / 01-01 00:00:00.359][0] [<ffffffc0004f797c>] __device_attach+0x2c/0x4c
303<4>[ 0.371032 / 01-01 00:00:00.359][0] [<ffffffc0004f6310>] bus_for_each_drv+0x88/0x90
304<4>[ 0.371045 / 01-01 00:00:00.359][0] [<ffffffc0004f7ab4>] device_attach+0x88/0x9c
305<4>[ 0.371060 / 01-01 00:00:00.359][0] [<ffffffc0004f64ac>] bus_probe_device+0x2c/0xa0
306<4>[ 0.371075 / 01-01 00:00:00.359][0] [<ffffffc0004f70cc>] deferred_probe_work_func+0x84/0x98
307<4>[ 0.371094 / 01-01 00:00:00.359][0] [<ffffffc0000b34ac>] process_one_work+0x234/0x410
308<4>[ 0.371108 / 01-01 00:00:00.359][0] [<ffffffc0000b399c>] worker_thread+0x2d8/0x394
309<4>[ 0.371122 / 01-01 00:00:00.359][0] [<ffffffc0000b81e0>] kthread+0xdc/0xe4
310<4>[ 0.371151 / 01-01 00:00:00.359][0] ---[ end trace 27c326aa49240c34 ]---
311<6>[ 0.371393 / 01-01 00:00:00.369][0] qcom,gcc-8996 300000.qcom,gcc: Registered GCC clocks.
312<6>[ 0.372468 / 01-01 00:00:00.369][0] vfe0_clk_src: set OPP pair(75000000 Hz: 3 uV) on a10000.qcom,vfe0
313<6>[ 0.372496 / 01-01 00:00:00.369][0] vfe0_clk_src: set OPP pair(320000000 Hz: 5 uV) on a10000.qcom,vfe0
314<6>[ 0.372513 / 01-01 00:00:00.369][0] vfe0_clk_src: set OPP pair(600000000 Hz: 7 uV) on a10000.qcom,vfe0
315<6>[ 0.372862 / 01-01 00:00:00.369][0] vfe1_clk_src: set OPP pair(75000000 Hz: 3 uV) on a14000.qcom,vfe1
316<6>[ 0.372883 / 01-01 00:00:00.369][0] vfe1_clk_src: set OPP pair(320000000 Hz: 5 uV) on a14000.qcom,vfe1
317<6>[ 0.372899 / 01-01 00:00:00.369][0] vfe1_clk_src: set OPP pair(600000000 Hz: 7 uV) on a14000.qcom,vfe1
318<6>[ 0.373260 / 01-01 00:00:00.369][0] cpp_clk_src: set OPP pair(100000000 Hz: 3 uV) on a04000.qcom,cpp
319<6>[ 0.373288 / 01-01 00:00:00.369][0] cpp_clk_src: set OPP pair(480000000 Hz: 5 uV) on a04000.qcom,cpp
320<6>[ 0.373302 / 01-01 00:00:00.369][0] cpp_clk_src: set OPP pair(640000000 Hz: 7 uV) on a04000.qcom,cpp
321<6>[ 0.382931 / 01-01 00:00:00.379][0] qcom,mmsscc-8996 8c0000.qcom,mmsscc: Registered MMSS clocks.
322<6>[ 0.385037 / 01-01 00:00:00.379][0] pmi8994_boost_5v: no parameters
323<3>[ 0.385214 / 01-01 00:00:00.379][0] qcom,rpm-smd-regulator soc:qcom,rpm-smd:rpm-regulator-bstb:regulator-bst: Failed to find supply parent
324<3>[ 0.385322 / 01-01 00:00:00.379][0] rpm_vreg_device_probe: regulator_register failed: pmi8994_boost_5v, rc=-517
325<6>[ 0.385562 / 01-01 00:00:00.379][0] pmi8994_boost_pin_ctrl: no parameters
326<3>[ 0.385640 / 01-01 00:00:00.379][0] qcom,rpm-smd-regulator soc:qcom,rpm-smd:rpm-regulator-bstb:regulator-bst-pin-ctrl: Failed to find supply parent
327<3>[ 0.385732 / 01-01 00:00:00.379][0] rpm_vreg_device_probe: regulator_register failed: pmi8994_boost_pin_ctrl, rc=-517
328<6>[ 0.386823 / 01-01 00:00:00.379][0] msm_thermal:sensor_mgr_init_threshold threshold id already initialized
329<6>[ 0.386859 / 01-01 00:00:00.379][0] msm-thermal 70000.qcom,msm-thermal: probe_vdd_mx:Failed reading node=/soc/qcom,msm-thermal, key=qcom,mx-restriction-temp. KTM continues
330<6>[ 0.387130 / 01-01 00:00:00.379][0] msm_thermal:vdd_restriction_reg_init Defer regulator vdd-gfx probe
331<3>[ 0.387148 / 01-01 00:00:00.379][0] msm_thermal:probe_vdd_rstr Err regulator init. err:-517. KTM continues.
332<6>[ 0.387166 / 01-01 00:00:00.379][0] msm-thermal 70000.qcom,msm-thermal: probe_vdd_rstr:Failed reading node=/soc/qcom,msm-thermal, key=qcom,max-freq-level. err=-517. KTM continues
333<3>[ 0.387181 / 01-01 00:00:00.379][0] msm_thermal:msm_thermal_dev_probe Failed reading node=/soc/qcom,msm-thermal, key=qcom,online-hotplug-core. err:-517
334<6>[ 0.387828 / 01-01 00:00:00.379][0] cpr3_msm8996_hmss_read_fuse_data: apc0_pwrcl_corner: speed bin = 0
335<6>[ 0.387851 / 01-01 00:00:00.379][0] cpr3_msm8996_hmss_read_fuse_data: apc0_pwrcl_corner: CPR fusing revision = 6
336<6>[ 0.387866 / 01-01 00:00:00.379][0] cpr3_msm8996_hmss_read_fuse_data: apc0_pwrcl_corner: using redundant fuses = N
337<6>[ 0.387880 / 01-01 00:00:00.379][0] cpr3_msm8996_hmss_read_fuse_data: apc0_pwrcl_corner: CPR limitation = none
338<6>[ 0.387894 / 01-01 00:00:00.379][0] cpr3_msm8996_hmss_read_fuse_data: apc0_pwrcl_corner: CPR partial binning limitation = none
339<6>[ 0.387909 / 01-01 00:00:00.379][0] cpr3_msm8996_hmss_read_fuse_data: apc0_pwrcl_corner: Retention voltage fuses: VDD_MX = 4, VDD_APCC = 4
340<6>[ 0.388140 / 01-01 00:00:00.379][0] cpr3_hmss_kvreg_init: apc0_pwrcl_corner: LDO min headroom=150000 uV, LDO max headroom=470000 uV, LDO adj=0 uV, LDO mode=allowed, LDO retention=490000 uV
341<6>[ 0.388389 / 01-01 00:00:00.379][0] cpr3_msm8996_hmss_calculate_open_loop_voltages: apc0_pwrcl_corner: fused MinSVS: open-loop= 605000 uV
342<6>[ 0.388407 / 01-01 00:00:00.379][0] cpr3_msm8996_hmss_calculate_open_loop_voltages: apc0_pwrcl_corner: fused SVS: open-loop= 705000 uV
343<6>[ 0.388421 / 01-01 00:00:00.379][0] cpr3_msm8996_hmss_calculate_open_loop_voltages: apc0_pwrcl_corner: fused NOM: open-loop= 815000 uV
344<6>[ 0.388434 / 01-01 00:00:00.379][0] cpr3_msm8996_hmss_calculate_open_loop_voltages: apc0_pwrcl_corner: fused TURBO: open-loop= 970000 uV
345<6>[ 0.388566 / 01-01 00:00:00.379][0] cpr3_msm8996_hmss_calculate_target_quotients: apc0_pwrcl_corner: fused MinSVS: quot[ 7]= 346
346<6>[ 0.388581 / 01-01 00:00:00.379][0] cpr3_msm8996_hmss_calculate_target_quotients: apc0_pwrcl_corner: fused SVS: quot[ 7]= 528, quot_offset[ 7]= 140
347<6>[ 0.388596 / 01-01 00:00:00.379][0] cpr3_msm8996_hmss_calculate_target_quotients: apc0_pwrcl_corner: fused NOM: quot[ 7]= 749, quot_offset[ 7]= 220
348<6>[ 0.388610 / 01-01 00:00:00.379][0] cpr3_msm8996_hmss_calculate_target_quotients: apc0_pwrcl_corner: fused TURBO: quot[ 7]=1026, quot_offset[ 7]= 275
349<6>[ 0.388808 / 01-01 00:00:00.379][0] cpr3_msm8996_hmss_read_fuse_data: apc0_cbf_corner: speed bin = 0
350<6>[ 0.388823 / 01-01 00:00:00.379][0] cpr3_msm8996_hmss_read_fuse_data: apc0_cbf_corner: CPR fusing revision = 6
351<6>[ 0.388838 / 01-01 00:00:00.379][0] cpr3_msm8996_hmss_read_fuse_data: apc0_cbf_corner: using redundant fuses = N
352<6>[ 0.388852 / 01-01 00:00:00.379][0] cpr3_msm8996_hmss_read_fuse_data: apc0_cbf_corner: CPR limitation = none
353<6>[ 0.388866 / 01-01 00:00:00.379][0] cpr3_msm8996_hmss_read_fuse_data: apc0_cbf_corner: CPR partial binning limitation = none
354<6>[ 0.388882 / 01-01 00:00:00.379][0] cpr3_msm8996_hmss_read_fuse_data: apc0_cbf_corner: Retention voltage fuses: VDD_MX = 4, VDD_APCC = 4
355<6>[ 0.389052 / 01-01 00:00:00.379][0] cpr3_msm8996_hmss_calculate_open_loop_voltages: apc0_cbf_corner: fused MinSVS: open-loop= 605000 uV
356<6>[ 0.389066 / 01-01 00:00:00.379][0] cpr3_msm8996_hmss_calculate_open_loop_voltages: apc0_cbf_corner: fused SVS: open-loop= 705000 uV
357<6>[ 0.389080 / 01-01 00:00:00.379][0] cpr3_msm8996_hmss_calculate_open_loop_voltages: apc0_cbf_corner: fused NOM: open-loop= 815000 uV
358<6>[ 0.389092 / 01-01 00:00:00.379][0] cpr3_msm8996_hmss_calculate_open_loop_voltages: apc0_cbf_corner: fused TURBO: open-loop= 970000 uV
359<6>[ 0.389154 / 01-01 00:00:00.379][0] cpr3_msm8996_hmss_calculate_target_quotients: apc0_cbf_corner: fused MinSVS: quot[ 7]= 346
360<6>[ 0.389169 / 01-01 00:00:00.379][0] cpr3_msm8996_hmss_calculate_target_quotients: apc0_cbf_corner: fused SVS: quot[ 7]= 528, quot_offset[ 7]= 140
361<6>[ 0.389183 / 01-01 00:00:00.379][0] cpr3_msm8996_hmss_calculate_target_quotients: apc0_cbf_corner: fused NOM: quot[ 7]= 749, quot_offset[ 7]= 220
362<6>[ 0.389197 / 01-01 00:00:00.379][0] cpr3_msm8996_hmss_calculate_target_quotients: apc0_cbf_corner: fused TURBO: quot[ 7]=1026, quot_offset[ 7]= 275
363<6>[ 0.389348 / 01-01 00:00:00.379][0] cpr3_msm8996_hmss_read_fuse_data: apc1_corner: speed bin = 0
364<6>[ 0.389361 / 01-01 00:00:00.379][0] cpr3_msm8996_hmss_read_fuse_data: apc1_corner: CPR fusing revision = 6
365<6>[ 0.389374 / 01-01 00:00:00.379][0] cpr3_msm8996_hmss_read_fuse_data: apc1_corner: using redundant fuses = N
366<6>[ 0.389387 / 01-01 00:00:00.379][0] cpr3_msm8996_hmss_read_fuse_data: apc1_corner: CPR limitation = none
367<6>[ 0.389400 / 01-01 00:00:00.379][0] cpr3_msm8996_hmss_read_fuse_data: apc1_corner: CPR partial binning limitation = none
368<6>[ 0.389415 / 01-01 00:00:00.379][0] cpr3_msm8996_hmss_read_fuse_data: apc1_corner: Retention voltage fuses: VDD_MX = 4, VDD_APCC = 4
369<6>[ 0.389670 / 01-01 00:00:00.379][0] cpr3_hmss_kvreg_init: apc1_corner: LDO min headroom=150000 uV, LDO max headroom=470000 uV, LDO adj=0 uV, LDO mode=allowed, LDO retention=490000 uV
370<6>[ 0.389947 / 01-01 00:00:00.379][0] cpr3_msm8996_hmss_calculate_open_loop_voltages: apc1_corner: fused MinSVS: open-loop= 595000 uV
371<6>[ 0.389963 / 01-01 00:00:00.379][0] cpr3_msm8996_hmss_calculate_open_loop_voltages: apc1_corner: fused SVS: open-loop= 685000 uV
372<6>[ 0.389978 / 01-01 00:00:00.379][0] cpr3_msm8996_hmss_calculate_open_loop_voltages: apc1_corner: fused NOM: open-loop= 745000 uV
373<6>[ 0.389991 / 01-01 00:00:00.379][0] cpr3_msm8996_hmss_calculate_open_loop_voltages: apc1_corner: fused TURBO: open-loop=1010000 uV
374<6>[ 0.390215 / 01-01 00:00:00.389][0] cpr3_msm8996_hmss_calculate_target_quotients: apc1_corner: fused MinSVS: quot[ 7]= 329
375<6>[ 0.390232 / 01-01 00:00:00.389][0] cpr3_msm8996_hmss_calculate_target_quotients: apc1_corner: fused SVS: quot[ 7]= 489, quot_offset[ 7]= 120
376<6>[ 0.390246 / 01-01 00:00:00.389][0] cpr3_msm8996_hmss_calculate_target_quotients: apc1_corner: fused NOM: quot[ 7]= 611, quot_offset[ 7]= 120
377<6>[ 0.390259 / 01-01 00:00:00.389][0] cpr3_msm8996_hmss_calculate_target_quotients: apc1_corner: fused TURBO: quot[ 7]=1087, quot_offset[ 7]= 475
378<6>[ 0.390846 / 01-01 00:00:00.389][0] cpr3_regulator_init_ctrl: apcc: Default CPR mode = SW closed-loop
379<6>[ 0.391009 / 01-01 00:00:00.389][0] apc0_pwrcl_corner: 0 <--> 0 mV at 0 mV
380<6>[ 0.391273 / 01-01 00:00:00.389][0] apc0_cbf_corner: 0 <--> 0 mV at 0 mV
381<6>[ 0.394535 / 01-01 00:00:00.389][0] cpr3_regulator_measure_aging: apcc: average quotient delta=12 (count=10)
382<6>[ 0.394576 / 01-01 00:00:00.389][0] cpr3_regulator_aging_adjust: apcc: aging measurement successful; aging reference adjustment voltage=1250 uV
383<6>[ 0.395082 / 01-01 00:00:00.389][0] apc1_corner: 0 <--> 0 mV at 0 mV
384<6>[ 0.396831 / 01-01 00:00:00.389][1] cpr3_msm8996_mmss_read_fuse_data: gfx_corner: CPR fusing revision = 4
385<6>[ 0.396858 / 01-01 00:00:00.389][1] cpr3_msm8996_mmss_read_fuse_data: gfx_corner: CPR limitation = none
386<6>[ 0.397148 / 01-01 00:00:00.389][1] cpr3_msm8996_mmss_calculate_open_loop_voltages: gfx_corner: fuse_corner[0] open-loop= 640000 uV
387<6>[ 0.397163 / 01-01 00:00:00.389][1] cpr3_msm8996_mmss_calculate_open_loop_voltages: gfx_corner: fuse_corner[1] open-loop= 685000 uV
388<6>[ 0.397175 / 01-01 00:00:00.389][1] cpr3_msm8996_mmss_calculate_open_loop_voltages: gfx_corner: fuse_corner[2] open-loop= 805000 uV
389<6>[ 0.397188 / 01-01 00:00:00.389][1] cpr3_msm8996_mmss_calculate_open_loop_voltages: gfx_corner: fuse_corner[3] open-loop= 895000 uV
390<6>[ 0.397375 / 01-01 00:00:00.389][1] cpr3_regulator_init_ctrl: gfx: Default CPR mode = closed-loop
391<6>[ 0.397533 / 01-01 00:00:00.389][1] gfx_corner: 0 <--> 0 mV at 0 mV
392<6>[ 0.399113 / 01-01 00:00:00.389][0] i2c-msm-v2 7577000.i2c: probing driver i2c-msm-v2
393<3>[ 0.399240 / 01-01 00:00:00.389][0] AXI: msm_bus_scale_register_client(): msm_bus_scale_register_client: Bus driver not ready.
394<6>[ 0.399257 / 01-01 00:00:00.389][0] i2c-msm-v2 7577000.i2c: msm_bus_scale_register_client(mstr-id:86):0 (not a problem)
395<6>[ 0.400653 / 01-01 00:00:00.399][0] i2c-msm-v2 757a000.i2c: probing driver i2c-msm-v2
396<3>[ 0.400780 / 01-01 00:00:00.399][0] AXI: msm_bus_scale_register_client(): msm_bus_scale_register_client: Bus driver not ready.
397<6>[ 0.400796 / 01-01 00:00:00.399][0] i2c-msm-v2 757a000.i2c: msm_bus_scale_register_client(mstr-id:86):0 (not a problem)
398<6>[ 0.402026 / 01-01 00:00:00.399][0] i2c-msm-v2 75b5000.i2c: probing driver i2c-msm-v2
399<3>[ 0.402149 / 01-01 00:00:00.399][0] AXI: msm_bus_scale_register_client(): msm_bus_scale_register_client: Bus driver not ready.
400<6>[ 0.402165 / 01-01 00:00:00.399][0] i2c-msm-v2 75b5000.i2c: msm_bus_scale_register_client(mstr-id:84):0 (not a problem)
401<6>[ 0.403061 / 01-01 00:00:00.399][0] i2c-msm-v2 75b6000.i2c: probing driver i2c-msm-v2
402<3>[ 0.403191 / 01-01 00:00:00.399][0] AXI: msm_bus_scale_register_client(): msm_bus_scale_register_client: Bus driver not ready.
403<6>[ 0.403207 / 01-01 00:00:00.399][0] i2c-msm-v2 75b6000.i2c: msm_bus_scale_register_client(mstr-id:84):0 (not a problem)
404<6>[ 0.404626 / 01-01 00:00:00.399][0] cpu-clock-8996 6400000.qcom,cpu-clock-8996: using perf/pwr/cbf speed bin 0 and pvs_ver 0
405<6>[ 0.406861 / 01-01 00:00:00.399][0] clock-cpu-8996: set OPP pair (307200000 Hz, 625000 uv) on cpu0
406<6>[ 0.406917 / 01-01 00:00:00.399][0] clock-cpu-8996: set OPP pair (1593600000 Hz, 945000 uv) on cpu0
407<6>[ 0.406940 / 01-01 00:00:00.399][0] clock-cpu-8996: set OPP pair (307200000 Hz, 625000 uv) on cpu1
408<6>[ 0.406977 / 01-01 00:00:00.399][0] clock-cpu-8996: set OPP pair (1593600000 Hz, 945000 uv) on cpu1
409<6>[ 0.407004 / 01-01 00:00:00.399][0] clock-cpu-8996: set OPP pair (307200000 Hz, 615000 uv) on cpu2
410<6>[ 0.407090 / 01-01 00:00:00.399][0] clock-cpu-8996: set OPP pair (2150400000 Hz, 995000 uv) on cpu2
411<6>[ 0.407112 / 01-01 00:00:00.399][0] clock-cpu-8996: set OPP pair (307200000 Hz, 615000 uv) on cpu3
412<6>[ 0.407168 / 01-01 00:00:00.399][0] clock-cpu-8996: set OPP pair (2150400000 Hz, 995000 uv) on cpu3
413<6>[ 0.407319 / 01-01 00:00:00.399][0] clock-cpu-8996: set OPP pair (307200000 Hz, 650000 uv) on soc:qcom,m4m
414<6>[ 0.407369 / 01-01 00:00:00.399][0] clock-cpu-8996: set OPP pair (1593600000 Hz, 945000 uv) on soc:qcom,m4m
415<6>[ 0.407909 / 01-01 00:00:00.399][0] qcom,gpucc-8996 8c0000.qcom,gpucc: using speed bin 0
416<6>[ 0.408401 / 01-01 00:00:00.399][0] gfx3d_clk_src_v2: set OPP pair(133000000 Hz: 570000 uV) on b00000.qcom,kgsl-3d0
417<6>[ 0.408444 / 01-01 00:00:00.399][0] gfx3d_clk_src_v2: set OPP pair(624000000 Hz: 895000 uV) on b00000.qcom,kgsl-3d0
418<6>[ 0.410096 / 01-01 00:00:00.409][0] qcom,gpucc-8996 8c0000.qcom,gpucc: Registered GPU clocks.
419<6>[ 0.410357 / 01-01 00:00:00.409][0] pmi8994_boost_5v: no parameters
420<3>[ 0.410487 / 01-01 00:00:00.409][0] qcom,rpm-smd-regulator soc:qcom,rpm-smd:rpm-regulator-bstb:regulator-bst: Failed to find supply parent
421<3>[ 0.410589 / 01-01 00:00:00.409][0] rpm_vreg_device_probe: regulator_register failed: pmi8994_boost_5v, rc=-517
422<6>[ 0.410818 / 01-01 00:00:00.409][0] pmi8994_boost_pin_ctrl: no parameters
423<3>[ 0.410894 / 01-01 00:00:00.409][0] qcom,rpm-smd-regulator soc:qcom,rpm-smd:rpm-regulator-bstb:regulator-bst-pin-ctrl: Failed to find supply parent
424<3>[ 0.410986 / 01-01 00:00:00.409][0] rpm_vreg_device_probe: regulator_register failed: pmi8994_boost_pin_ctrl, rc=-517
425<6>[ 0.412043 / 01-01 00:00:00.409][0] msm_thermal:sensor_mgr_init_threshold threshold id already initialized
426<6>[ 0.412078 / 01-01 00:00:00.409][0] msm-thermal 70000.qcom,msm-thermal: probe_vdd_mx:Failed reading node=/soc/qcom,msm-thermal, key=qcom,mx-restriction-temp. KTM continues
427<6>[ 0.412448 / 01-01 00:00:00.409][0] msm_thermal:update_cpu_freq [CPU0] : max freq = 1190400
428<3>[ 0.412466 / 01-01 00:00:00.409][0] msm_thermal:update_cpu_freq Unable to update policy for cpu:0. err:-19
429<6>[ 0.412482 / 01-01 00:00:00.409][0] msm_thermal:update_cpu_freq [CPU2] : max freq = 0
430<3>[ 0.412495 / 01-01 00:00:00.409][0] msm_thermal:update_cpu_freq Unable to update policy for cpu:2. err:-19
431<6>[ 0.412510 / 01-01 00:00:00.409][0] msm_thermal:update_cpu_freq [CPU2] : max freq = 1190400
432<3>[ 0.412523 / 01-01 00:00:00.409][0] msm_thermal:update_cpu_freq Unable to update policy for cpu:2. err:-19
433<6>[ 0.413646 / 01-01 00:00:00.409][0] msm_thermal:update_cpu_freq [CPU0] : max freq = 1593600
434<3>[ 0.413697 / 01-01 00:00:00.409][0] msm_thermal:update_cpu_freq Unable to update policy for cpu:0. err:-19
435<6>[ 0.413714 / 01-01 00:00:00.409][0] msm_thermal:update_cpu_freq [CPU2] : max freq = 4294967295
436<3>[ 0.413727 / 01-01 00:00:00.409][0] msm_thermal:update_cpu_freq Unable to update policy for cpu:2. err:-19
437<6>[ 0.413742 / 01-01 00:00:00.409][0] msm_thermal:update_cpu_freq [CPU2] : max freq = 2150400
438<3>[ 0.413754 / 01-01 00:00:00.409][0] msm_thermal:update_cpu_freq Unable to update policy for cpu:2. err:-19
439<6>[ 0.413911 / 01-01 00:00:00.409][3] pmi8994_boost_5v: no parameters
440<3>[ 0.414016 / 01-01 00:00:00.409][3] qcom,rpm-smd-regulator soc:qcom,rpm-smd:rpm-regulator-bstb:regulator-bst: Failed to find supply parent
441<3>[ 0.414117 / 01-01 00:00:00.409][3] rpm_vreg_device_probe: regulator_register failed: pmi8994_boost_5v, rc=-517
442<6>[ 0.414324 / 01-01 00:00:00.409][3] pmi8994_boost_pin_ctrl: no parameters
443<3>[ 0.414387 / 01-01 00:00:00.409][3] qcom,rpm-smd-regulator soc:qcom,rpm-smd:rpm-regulator-bstb:regulator-bst-pin-ctrl: Failed to find supply parent
444<3>[ 0.414480 / 01-01 00:00:00.409][3] rpm_vreg_device_probe: regulator_register failed: pmi8994_boost_pin_ctrl, rc=-517
445<6>[ 0.464786 / 01-01 00:00:00.459][3] KPI: Bootloader start count = 42808
446<6>[ 0.464809 / 01-01 00:00:00.459][3] KPI: Bootloader end count = 240188
447<6>[ 0.464821 / 01-01 00:00:00.459][3] KPI: Bootloader display count = 60353
448<6>[ 0.464833 / 01-01 00:00:00.459][3] KPI: Bootloader load kernel count = 5855
449<6>[ 0.464847 / 01-01 00:00:00.459][3] KPI: Kernel MPM timestamp = 265559
450<6>[ 0.464858 / 01-01 00:00:00.459][3] KPI: Kernel MPM Clock frequency = 32768
451<6>[ 0.464885 / 01-01 00:00:00.459][3] socinfo_print: v0.11, id=246, ver=3.1, raw_id=2375, raw_ver=4, hw_plat=8, hw_plat_ver=12
452<6>[ 0.464885 / 01-01 00:00:00.459][3] accessory_chip=0, hw_plat_subtype=0, pmic_model=65545, pmic_die_revision=131072 foundry_id=3 serial_number=477453917 num_pmics=2
453<3>[ 0.464924 / 01-01 00:00:00.459][3] [LGE_POWER] lge power!!!
454<6>[ 0.465185 / 01-01 00:00:00.459][3] gdsc_mmagic_bimc: no parameters
455<6>[ 0.465974 / 01-01 00:00:00.459][3] usb_otg_vreg: no parameters
456<3>[ 0.466053 / 01-01 00:00:00.459][3] reg-fixed-voltage soc:usb-otg-switch: Failed to find supply vin
457<3>[ 0.466154 / 01-01 00:00:00.459][3] reg-fixed-voltage soc:usb-otg-switch: Failed to register regulator: -517
458<6>[ 0.466866 / 01-01 00:00:00.459][3] vgaarb: loaded
459<5>[ 0.468413 / 01-01 00:00:00.459][3] SCSI subsystem initialized
460<6>[ 0.469478 / 01-01 00:00:00.459][3] usbcore: registered new interface driver usbfs
461<6>[ 0.469531 / 01-01 00:00:00.459][3] usbcore: registered new interface driver hub
462<6>[ 0.469687 / 01-01 00:00:00.459][3] usbcore: registered new device driver usb
463<4>[ 0.470142 / 01-01 00:00:00.469][3] soc:usb_nop_phy supply vcc not found, using dummy regulator
464<6>[ 0.470859 / 01-01 00:00:00.469][3] media: Linux media interface: v0.10
465<6>[ 0.470917 / 01-01 00:00:00.469][3] Linux video capture interface: v2.00
466<6>[ 0.560658 / 01-01 00:00:00.559][3] cpufreq: driver msm up and running
467<6>[ 0.561275 / 01-01 00:00:00.559][3] platform soc:qcom,ion:qcom,ion-heap@22: assigned reserved memory node adsp_region
468<6>[ 0.561452 / 01-01 00:00:00.559][3] platform soc:qcom,ion:qcom,ion-heap@27: assigned reserved memory node qseecom_region
469<6>[ 0.561598 / 01-01 00:00:00.559][3] platform soc:qcom,ion:qcom,ion-heap@10: assigned reserved memory node secure_region
470<6>[ 0.561839 / 01-01 00:00:00.559][3] ION heap system created
471<6>[ 0.561961 / 01-01 00:00:00.559][1] ION heap kmalloc created
472<6>[ 0.561980 / 01-01 00:00:00.559][1] ION heap adsp created at 0x00000000ff800000 with size 400000
473<6>[ 0.561993 / 01-01 00:00:00.559][1] ION heap qsecom created at 0x00000000fe400000 with size 1400000
474<6>[ 0.562006 / 01-01 00:00:00.559][1] ION heap secure_display created at 0x00000000f8800000 with size 5c00000
475<6>[ 0.562018 / 01-01 00:00:00.559][1] ION heap secure_heap created
476<3>[ 0.562905 / 01-01 00:00:00.559][1] msm_bus_fabric_init_driver
477<3>[ 0.566954 / 01-01 00:00:00.559][1] msm-bus-type fab-a0noc: Error: Failed to get regulator bus-gdsc:-517
478<3>[ 0.566975 / 01-01 00:00:00.559][1] msm-bus-type fab-a0noc: Error: Failed to get regulator bus-a-gdsc:-517
479<3>[ 0.570617 / 01-01 00:00:00.569][2] msm-bus-type slv-vmem-cfg: Error: Failed to get regulator node-gdsc:-517
480<3>[ 0.571093 / 01-01 00:00:00.569][2] msm-bus-type slv-vmem: Error: Failed to get regulator node-gdsc:-517
481<3>[ 0.576721 / 01-01 00:00:00.569][2] msm-bus-type fab-a0noc: Error: Failed to get regulator aggre0-snoc-axi-no-rate:-517
482<3>[ 0.576735 / 01-01 00:00:00.569][2] msm-bus-type fab-a0noc: Error: Failed to get regulator aggre0-snoc-axi-no-rate:-517
483<3>[ 0.576747 / 01-01 00:00:00.569][2] msm-bus-type fab-a0noc: Error: Failed to get regulator aggre0-snoc-axi-no-rate:-517
484<3>[ 0.576861 / 01-01 00:00:00.569][2] msm-bus-type fab-mnoc: Error: Failed to get regulator mmagic-mdss-axi-no-rate:-517
485<3>[ 0.576885 / 01-01 00:00:00.569][2] msm-bus-type fab-mnoc: Error: Failed to get regulator mmagic-mdss-axi-no-rate:-517
486<3>[ 0.576907 / 01-01 00:00:00.569][2] msm-bus-type fab-mnoc: Error: Failed to get regulator mmagic-mdss-axi-no-rate:-517
487<3>[ 0.576929 / 01-01 00:00:00.569][2] msm-bus-type fab-mnoc: Error: Failed to get regulator mmagic-mdss-axi-no-rate:-517
488<3>[ 0.576950 / 01-01 00:00:00.569][2] msm-bus-type fab-mnoc: Error: Failed to get regulator mmagic-mdss-axi-no-rate:-517
489<3>[ 0.576970 / 01-01 00:00:00.569][2] msm-bus-type fab-mnoc: Error: Failed to get regulator mmagic-mdss-axi-no-rate:-517
490<3>[ 0.576991 / 01-01 00:00:00.569][2] msm-bus-type fab-mnoc: Error: Failed to get regulator mmagic-mdss-axi-no-rate:-517
491<6>[ 0.578417 / 01-01 00:00:00.569][2] qcom,qpnp-power-on qpnp-power-on-2: PMIC@SID0 Power-on reason: Triggered from Hard Reset and 'warm' boot
492<6>[ 0.578438 / 01-01 00:00:00.569][2] qcom,qpnp-power-on qpnp-power-on-2: PMIC@SID0: Power-off reason: Triggered from PS_HOLD (PS_HOLD/MSM controlled shutdown)
493<6>[ 0.578606 / 01-01 00:00:00.569][2] input: qpnp_pon as /devices/virtual/input/input0
494<6>[ 0.579033 / 01-01 00:00:00.569][2] pon_spare_reg: no parameters
495<6>[ 0.579087 / 01-01 00:00:00.569][2] qcom,qpnp-power-on qpnp-power-on-11: No PON config. specified
496<6>[ 0.579145 / 01-01 00:00:00.569][2] qcom,qpnp-power-on qpnp-power-on-11: PMIC@SID2 Power-on reason: Triggered from Hard Reset and 'warm' boot
497<6>[ 0.579162 / 01-01 00:00:00.569][2] qcom,qpnp-power-on qpnp-power-on-11: PMIC@SID2: Power-off reason: Triggered from PS_HOLD (PS_HOLD/MSM controlled shutdown)
498<6>[ 0.579356 / 01-01 00:00:00.569][2] PMIC@SID0: PM8994 v2.0 options: 0, 0, 2, 2
499<6>[ 0.579445 / 01-01 00:00:00.569][2] PMIC@SID2: PMI8996 v1.1 options: 0, 0, 0, 0
500<3>[ 0.580625 / 01-01 00:00:00.579][2] ipa ipa2_uc_state_check:296 uC interface not initialized
501<3>[ 0.580639 / 01-01 00:00:00.579][2] ipa ipa_sps_irq_control_all:937 EP (2) not allocated.
502<3>[ 0.580645 / 01-01 00:00:00.579][2] ipa ipa_sps_irq_control_all:937 EP (5) not allocated.
503<6>[ 0.582237 / 01-01 00:00:00.579][3] sps:BAM 0x0000000000684000 is registered.
504<3>[ 0.583049 / 01-01 00:00:00.579][3] ipa ipa2_uc_state_check:296 uC interface not initialized
505<6>[ 0.583252 / 01-01 00:00:00.579][3] sps:BAM 0x0000000000684000 (va:0xffffff8000ec0000) enabled: ver:0x27, number of pipes:20
506<3>[ 0.584700 / 01-01 00:00:00.579][3] ipa ipa2_uc_state_check:296 uC interface not initialized
507<3>[ 0.592499 / 01-01 00:00:00.589][3] ipa ipa2_uc_state_check:296 uC interface not initialized
508<6>[ 0.594414 / 01-01 00:00:00.589][3] IPA driver initialization was successful.
509<6>[ 0.595844 / 01-01 00:00:00.589][3] gdsc_mmagic_video: no parameters
510<6>[ 0.596088 / 01-01 00:00:00.589][3] gdsc_mmagic_mdss: no parameters
511<6>[ 0.596249 / 01-01 00:00:00.589][3] gdsc_mmagic_camss: no parameters
512<6>[ 0.596503 / 01-01 00:00:00.589][3] gdsc_venus: no parameters
513<6>[ 0.596525 / 01-01 00:00:00.589][3] gdsc_venus: supplied by gdsc_mmagic_video
514<6>[ 0.596708 / 01-01 00:00:00.589][3] gdsc_venus_core0: fast normal
515<6>[ 0.596898 / 01-01 00:00:00.589][3] gdsc_venus_core1: fast normal
516<6>[ 0.597076 / 01-01 00:00:00.589][3] gdsc_camss_top: no parameters
517<6>[ 0.597095 / 01-01 00:00:00.589][3] gdsc_camss_top: supplied by gdsc_mmagic_camss
518<6>[ 0.597293 / 01-01 00:00:00.589][3] gdsc_vfe0: no parameters
519<6>[ 0.597311 / 01-01 00:00:00.589][3] gdsc_vfe0: supplied by gdsc_camss_top
520<6>[ 0.597479 / 01-01 00:00:00.589][3] gdsc_vfe1: no parameters
521<6>[ 0.597499 / 01-01 00:00:00.589][3] gdsc_vfe1: supplied by gdsc_camss_top
522<6>[ 0.597708 / 01-01 00:00:00.589][3] gdsc_mdss: no parameters
523<6>[ 0.597728 / 01-01 00:00:00.589][3] gdsc_mdss: supplied by gdsc_mmagic_mdss
524<6>[ 0.598033 / 01-01 00:00:00.589][3] gdsc_jpeg: no parameters
525<6>[ 0.598052 / 01-01 00:00:00.589][3] gdsc_jpeg: supplied by gdsc_camss_top
526<6>[ 0.598232 / 01-01 00:00:00.589][3] gdsc_cpp: no parameters
527<6>[ 0.598251 / 01-01 00:00:00.589][3] gdsc_cpp: supplied by gdsc_camss_top
528<6>[ 0.598441 / 01-01 00:00:00.589][3] gdsc_pcie_0: no parameters
529<6>[ 0.598587 / 01-01 00:00:00.589][3] gdsc_pcie_1: no parameters
530<6>[ 0.598754 / 01-01 00:00:00.589][3] gdsc_pcie_2: no parameters
531<6>[ 0.598900 / 01-01 00:00:00.589][3] gdsc_usb30: no parameters
532<6>[ 0.599061 / 01-01 00:00:00.589][3] gdsc_ufs: no parameters
533<6>[ 0.599250 / 01-01 00:00:00.589][3] gdsc_fd: no parameters
534<6>[ 0.599270 / 01-01 00:00:00.589][3] gdsc_fd: supplied by gdsc_camss_top
535<6>[ 0.599450 / 01-01 00:00:00.589][3] gdsc_gpu: no parameters
536<6>[ 0.599633 / 01-01 00:00:00.589][3] gdsc_gpu_gx: no parameters
537<6>[ 0.599997 / 01-01 00:00:00.589][3] gdsc_gpu_gx: supplied by gfx_corner
538<6>[ 0.600358 / 01-01 00:00:00.599][3] gdsc_hlos1_vote_aggre0_noc: no parameters
539<6>[ 0.600502 / 01-01 00:00:00.599][3] gdsc_hlos1_vote_lpass_adsp: no parameters
540<6>[ 0.600664 / 01-01 00:00:00.599][3] gdsc_hlos1_vote_lpass_core: no parameters
541<6>[ 0.600812 / 01-01 00:00:00.599][3] gdsc_aggre0_noc: no parameters
542<6>[ 0.603177 / 01-01 00:00:00.599][3] mdss_pll_probe: MDSS pll label = MDSS DSI 0 PLL
543<6>[ 0.603199 / 01-01 00:00:00.599][3] mdss_pll_probe: mdss_pll_probe: label=MDSS DSI 0 PLL PLL SSC enabled
544<6>[ 0.604468 / 01-01 00:00:00.599][3] dsi_pll_clock_register_8996: Registered DSI PLL ndx=0 clocks successfully
545<6>[ 0.604518 / 01-01 00:00:00.599][3] mdss_pll_probe: MDSS pll label = MDSS DSI 1 PLL
546<6>[ 0.604533 / 01-01 00:00:00.599][3] mdss_pll_probe: mdss_pll_probe: label=MDSS DSI 1 PLL PLL SSC enabled
547<3>[ 0.605615 / 01-01 00:00:00.599][3] pll_is_pll_locked_8996: DSI PLL ndx=1 status=0 failed to Lock
548<6>[ 0.606209 / 01-01 00:00:00.599][3] dsi_pll_clock_register_8996: Registered DSI PLL ndx=1 clocks successfully
549<6>[ 0.606243 / 01-01 00:00:00.599][3] mdss_pll_probe: MDSS pll label = MDSS HDMI PLL
550<3>[ 0.606252 / 01-01 00:00:00.599][3] mdss_pll_probe: Unable to get the cell-index rc=-22
551<6>[ 0.738956 / 01-01 00:00:00.729][3] Advanced Linux Sound Architecture Driver Initialized.
552<6>[ 0.739647 / 01-01 00:00:00.729][3] Bluetooth: ffffffc0f889bd30
553<6>[ 0.739738 / 01-01 00:00:00.729][3] NET: Registered protocol family 31
554<6>[ 0.739751 / 01-01 00:00:00.729][3] Bluetooth: ffffffc0f889bd30
555<6>[ 0.739765 / 01-01 00:00:00.729][3] Bluetooth: ffffffc0f889bd10Bluetooth: ffffffc0f889bcf0
556<6>[ 0.739810 / 01-01 00:00:00.729][3] Bluetooth: ffffffc0f889bcf0<6>[ 0.740405 / 01-01 00:00:00.739][3] cfg80211: Calling CRDA to update world regulatory domain
557<6>[ 0.740437 / 01-01 00:00:00.739][3] cfg80211: World regulatory domain updated:
558<6>[ 0.740447 / 01-01 00:00:00.739][3] cfg80211: DFS Master region: unset
559<6>[ 0.740455 / 01-01 00:00:00.739][3] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
560<6>[ 0.740471 / 01-01 00:00:00.739][3] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
561<6>[ 0.740480 / 01-01 00:00:00.739][3] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
562<6>[ 0.740489 / 01-01 00:00:00.739][3] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A, 2000 mBm), (N/A)
563<6>[ 0.740499 / 01-01 00:00:00.739][3] cfg80211: (5170000 KHz - 5250000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A)
564<6>[ 0.740507 / 01-01 00:00:00.739][3] cfg80211: (5250000 KHz - 5330000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A)
565<6>[ 0.740515 / 01-01 00:00:00.739][3] cfg80211: (5490000 KHz - 5710000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A)
566<6>[ 0.740523 / 01-01 00:00:00.739][3] cfg80211: (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A)
567<6>[ 0.740533 / 01-01 00:00:00.739][3] cfg80211: (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm), (N/A)
568<1>[ 0.740697 / 01-01 00:00:00.739][2] pcie:pcie_init.
569<3>[ 0.740709 / 01-01 00:00:00.739][2] pcie_init: unable to create IPC log context for pcie0-short
570<3>[ 0.740717 / 01-01 00:00:00.739][2] pcie_init: unable to create IPC log context for pcie0-long
571<3>[ 0.740725 / 01-01 00:00:00.739][2] pcie_init: unable to create IPC log context for pcie0-dump
572<3>[ 0.740733 / 01-01 00:00:00.739][2] pcie_init: unable to create IPC log context for pcie1-short
573<3>[ 0.740741 / 01-01 00:00:00.739][2] pcie_init: unable to create IPC log context for pcie1-long
574<3>[ 0.740748 / 01-01 00:00:00.739][2] pcie_init: unable to create IPC log context for pcie1-dump
575<3>[ 0.740756 / 01-01 00:00:00.739][2] pcie_init: unable to create IPC log context for pcie2-short
576<3>[ 0.740763 / 01-01 00:00:00.739][2] pcie_init: unable to create IPC log context for pcie2-long
577<3>[ 0.740770 / 01-01 00:00:00.739][2] pcie_init: unable to create IPC log context for pcie2-dump
578<4>[ 0.742778 / 01-01 00:00:00.739][2] 600000.qcom,pcie supply vreg-3.3 not found, using dummy regulator
579<3>[ 0.745465 / 01-01 00:00:00.739][2] msm_pcie_get_resources: PCIe: RC0 can't get tcsr resource.
580<6>[ 0.748233 / 01-01 00:00:00.739][1] pmi8994_boost_5v: no parameters
581<6>[ 0.748518 / 01-01 00:00:00.739][1] pmi8994_boost_5v: supplied by pon_spare_reg
582<6>[ 0.749074 / 01-01 00:00:00.739][1] pmi8994_boost_pin_ctrl: no parameters
583<6>[ 0.749300 / 01-01 00:00:00.739][1] pmi8994_boost_pin_ctrl: supplied by pon_spare_reg
584<3>[ 0.749703 / 01-01 00:00:00.739][1] register_qpnp_ibb_regulator: [Display] IBB soft start R is set for PMI8996
585<6>[ 0.749947 / 01-01 00:00:00.739][1] ibb_reg: 4600 <--> 6000 mV at 5500 mV
586<6>[ 0.750439 / 01-01 00:00:00.749][1] lab_reg: 4600 <--> 6000 mV at 5500 mV
587<6>[ 0.751258 / 01-01 00:00:00.749][1] usb_otg_vreg: no parameters
588<3>[ 0.751448 / 01-01 00:00:00.749][1] reg-fixed-voltage soc:usb-otg-switch: Failed to find supply vin
589<3>[ 0.751580 / 01-01 00:00:00.749][1] reg-fixed-voltage soc:usb-otg-switch: Failed to register regulator: -517
590<6>[ 0.752445 / 01-01 00:00:00.749][2] Switched to clocksource arch_sys_counter
591<6>[ 0.787930 / 01-01 00:00:00.779][2] [LGE-BATT-ID] lge_battery_id_probe : LG Battery ID probe Start~!!
592<6>[ 0.787967 / 01-01 00:00:00.779][2] [LGE-BATT-ID] lge_battery_id_probe : Battery info : 187
593<6>[ 0.788226 / 01-01 00:00:00.779][2] [LGE-BATT-ID] lge_battery_id_probe : LG Battery ID probe done~!!
594<6>[ 0.788274 / 01-01 00:00:00.779][2] lge_power_changed_work
595<6>[ 0.789823 / 01-01 00:00:00.779][2] [LGE-UEVENT] lge_uevent_probe : LG UEVENT probe Start~!!
596<6>[ 0.789966 / 01-01 00:00:00.779][2] [LGE-UEVENT] lge_uevent_probe : LG UEVENT probe done~!!
597<6>[ 0.789997 / 01-01 00:00:00.779][2] lge_power_changed_work
598<6>[ 0.790900 / 01-01 00:00:00.789][2] bcl_peripheral:bcl_perph_init BCL Initialized
599<6>[ 0.795564 / 01-01 00:00:00.789][3] NET: Registered protocol family 2
600<6>[ 0.796151 / 01-01 00:00:00.789][3] TCP established hash table entries: 32768 (order: 6, 262144 bytes)
601<6>[ 0.796234 / 01-01 00:00:00.789][3] TCP bind hash table entries: 32768 (order: 7, 524288 bytes)
602<6>[ 0.796573 / 01-01 00:00:00.789][3] TCP: Hash tables configured (established 32768 bind 32768)
603<6>[ 0.796713 / 01-01 00:00:00.789][3] TCP: reno registered
604<6>[ 0.796735 / 01-01 00:00:00.789][3] UDP hash table entries: 2048 (order: 4, 65536 bytes)
605<6>[ 0.796760 / 01-01 00:00:00.789][3] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
606<6>[ 0.797105 / 01-01 00:00:00.789][3] NET: Registered protocol family 1
607<7>[ 0.797182 / 01-01 00:00:00.789][3] PCI: CLS 0 bytes, default 128
608<6>[ 0.798092 / 01-01 00:00:00.789][1] usb_otg_vreg: no parameters
609<3>[ 0.798235 / 01-01 00:00:00.789][1] reg-fixed-voltage soc:usb-otg-switch: Failed to find supply vin
610<3>[ 0.798340 / 01-01 00:00:00.789][1] reg-fixed-voltage soc:usb-otg-switch: Failed to register regulator: -517
611<6>[ 0.798864 / 01-01 00:00:00.789][3] Trying to unpack rootfs image as initramfs...
612<6>[ 0.940925 / 01-01 00:00:00.939][3] Freeing initrd memory: 6720K (ffffffc002200000 - ffffffc002890000)
613<6>[ 0.943003 / 01-01 00:00:00.939][3] kryo perfevents: CPU pmu for kryo-pmuv3 detected
614<6>[ 0.948776 / 01-01 00:00:00.939][3] futex hash table entries: 1024 (order: 5, 131072 bytes)
615<5>[ 0.948911 / 01-01 00:00:00.939][3] Initialise system trusted keyring
616<6>[ 0.949009 / 01-01 00:00:00.939][3] audit: initializing netlink subsys (disabled)
617<5>[ 0.949123 / 01-01 00:00:00.939][3] audit: type=2000 audit(0.939:1): initialized
618<4>[ 0.953942 / 01-01 00:00:00.949][3] vmscan: error setting kswapd cpu affinity mask
619<6>[ 0.957476 / 01-01 00:00:00.949][3] exFAT: Core Version 1.2.23
620<6>[ 0.957497 / 01-01 00:00:00.949][3] exFAT: FS Version 1.2.23
621<6>[ 0.957841 / 01-01 00:00:00.949][3] Registering sdcardfs 2.1.3-2
622<6>[ 0.957921 / 01-01 00:00:00.949][3] fuse init (API version 7.23)
623<7>[ 0.958220 / 01-01 00:00:00.949][3] SELinux: Registering netfilter hooks
624<5>[ 0.960896 / 01-01 00:00:00.959][3] Key type asymmetric registered
625<5>[ 0.960915 / 01-01 00:00:00.959][3] Asymmetric key parser 'x509' registered
626<6>[ 0.961054 / 01-01 00:00:00.959][3] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 246)
627<6>[ 0.961071 / 01-01 00:00:00.959][3] io scheduler noop registered (default)
628<6>[ 0.971831 / 01-01 00:00:00.969][3] [LCD][LM3697] lm3697_probe: i2c probe start
629<6>[ 0.972171 / 01-01 00:00:00.969][3] [LM3697] lm3697_parse_dt gpio: 1015, max_current: 19, min: 1, default: 46, max: 255, output_config: 4, brightness_config: 0, sink_feedback: 0, boost_ctrl: 4, pwm : 0
630<6>[ 0.972181 / 01-01 00:00:00.969][3] [LCD][LM3697] lm3697_probe: gpio = 1015
631<3>[ 0.973149 / 01-01 00:00:00.969][3] mdss_mdp_irq_clk_register: unable to get clk: lut_clk
632<3>[ 0.974466 / 01-01 00:00:00.969][3] No change in context(0==0), skip
633<6>[ 0.975585 / 01-01 00:00:00.969][3] mdss_mdp_pipe_addr_setup: type:0 ftchid:-1 xinid:0 num:0 rect:0 ndx:0x1 prio:0
634<6>[ 0.975596 / 01-01 00:00:00.969][3] mdss_mdp_pipe_addr_setup: type:0 ftchid:-1 xinid:4 num:1 rect:0 ndx:0x2 prio:1
635<6>[ 0.975603 / 01-01 00:00:00.969][3] mdss_mdp_pipe_addr_setup: type:0 ftchid:-1 xinid:8 num:2 rect:0 ndx:0x4 prio:2
636<6>[ 0.975611 / 01-01 00:00:00.969][3] mdss_mdp_pipe_addr_setup: type:0 ftchid:-1 xinid:12 num:8 rect:0 ndx:0x100 prio:3
637<6>[ 0.975633 / 01-01 00:00:00.969][3] mdss_mdp_pipe_addr_setup: type:1 ftchid:-1 xinid:1 num:3 rect:0 ndx:0x8 prio:4
638<6>[ 0.975640 / 01-01 00:00:00.969][3] mdss_mdp_pipe_addr_setup: type:1 ftchid:-1 xinid:5 num:4 rect:0 ndx:0x10 prio:5
639<6>[ 0.975646 / 01-01 00:00:00.969][3] mdss_mdp_pipe_addr_setup: type:1 ftchid:-1 xinid:9 num:5 rect:0 ndx:0x20 prio:6
640<6>[ 0.975653 / 01-01 00:00:00.969][3] mdss_mdp_pipe_addr_setup: type:1 ftchid:-1 xinid:13 num:9 rect:0 ndx:0x200 prio:7
641<6>[ 0.975670 / 01-01 00:00:00.969][3] mdss_mdp_pipe_addr_setup: type:2 ftchid:-1 xinid:2 num:6 rect:0 ndx:0x40 prio:8
642<6>[ 0.975676 / 01-01 00:00:00.969][3] mdss_mdp_pipe_addr_setup: type:2 ftchid:-1 xinid:10 num:7 rect:0 ndx:0x80 prio:9
643<6>[ 0.975692 / 01-01 00:00:00.969][3] mdss_mdp_pipe_addr_setup: type:3 ftchid:-1 xinid:7 num:10 rect:0 ndx:0x400 prio:0
644<6>[ 0.975698 / 01-01 00:00:00.969][3] mdss_mdp_pipe_addr_setup: type:3 ftchid:-1 xinid:7 num:11 rect:0 ndx:0x800 prio:1
645<3>[ 0.975708 / 01-01 00:00:00.969][3] mdss_mdp_parse_dt_handler: Error from prop qcom,mdss-pipe-sw-reset-off : u32 array read
646<3>[ 0.975784 / 01-01 00:00:00.969][3] mdss_mdp_parse_dt_handler: Error from prop qcom,mdss-ib-factor-overlap : u32 array read
647<6>[ 0.976158 / 01-01 00:00:00.969][3] xlog_status: enable:1, panic:0, dump:2
648<3>[ 0.976396 / 01-01 00:00:00.969][3] OF: no ranges; cannot translate
649<3>[ 0.976411 / 01-01 00:00:00.969][3] OF: no ranges; cannot translate
650<3>[ 0.977025 / 01-01 00:00:00.969][3] OF: no ranges; cannot translate
651<3>[ 0.977036 / 01-01 00:00:00.969][3] OF: no ranges; cannot translate
652<3>[ 0.977169 / 01-01 00:00:00.969][3] OF: no ranges; cannot translate
653<3>[ 0.977180 / 01-01 00:00:00.969][3] OF: no ranges; cannot translate
654<3>[ 0.977299 / 01-01 00:00:00.969][3] OF: no ranges; cannot translate
655<3>[ 0.977309 / 01-01 00:00:00.969][3] OF: no ranges; cannot translate
656<6>[ 0.977486 / 01-01 00:00:00.969][3] mdss_mdp_probe: mdss version = 0x10070002, bootloader display is on, num 1, intf_sel=0x00000100
657<6>[ 0.982756 / 01-01 00:00:00.979][3] mdss_smmu_probe: iommu v2 domain[0] mapping and clk register successful!
658<6>[ 0.982932 / 01-01 00:00:00.979][3] mdss_smmu_probe: iommu v2 domain[1] mapping and clk register successful!
659<6>[ 0.983055 / 01-01 00:00:00.979][3] mdss_smmu_probe: iommu v2 domain[2] mapping and clk register successful!
660<6>[ 0.983171 / 01-01 00:00:00.979][3] mdss_smmu_probe: iommu v2 domain[3] mapping and clk register successful!
661<6>[ 0.986100 / 01-01 00:00:00.979][3] mdss_dsi_ctrl_probe: DSI Ctrl name = MDSS DSI CTRL->0
662<6>[ 0.986600 / 01-01 00:00:00.979][3] mdss_dsi_find_panel_of_node: cmdline:0:qcom,mdss_dsi_sw49407_dsc_qhd_cmd:config1:1:none:cfg:single_dsi panel_name:qcom,mdss_dsi_sw49407_dsc_qhd_cmd
663<6>[ 0.986617 / 01-01 00:00:00.979][3] mdss_dsi_panel_init: Panel Name = SW49407 cmd mode dsc dsi panel
664<3>[ 0.986626 / 01-01 00:00:00.979][3] mdss_dsi_panel_init: panel_type is LGD_SW49407_CMD_DSC_PANEL
665<6>[ 0.986633 / 01-01 00:00:00.979][3] panel_type is 4
666<6>[ 0.986676 / 01-01 00:00:00.979][3] lge_mdss_panel_parse_dt_blmaps: found lge,blmap
667<6>[ 0.986688 / 01-01 00:00:00.979][3] lge_mdss_panel_parse_dt_blmaps: found lge,blmap-hl
668<6>[ 0.986700 / 01-01 00:00:00.979][3] lge_mdss_panel_parse_dt_blmaps: found lge,blmap-ex
669<6>[ 0.986709 / 01-01 00:00:00.979][3] lge_mdss_panel_parse_dt_blmaps: found lge,blmap-ex-dim
670<6>[ 0.986718 / 01-01 00:00:00.979][3] lge_mdss_panel_parse_dt_blmaps: found lge,blmap-ex-hl
671<6>[ 0.986728 / 01-01 00:00:00.979][3] lge_mdss_panel_parse_dt_blmaps: found lge,blmap-ex-dim-hl
672<6>[ 0.986797 / 01-01 00:00:00.979][3] mdss_dsi_panel_timing_from_dt: found new timing "qcom,mdss_dsi_sw49407_dsc_qhd_cmd" (ffffffc0f889b230)
673<3>[ 0.986822 / 01-01 00:00:00.979][3] mdss_dsi_parse_dcs_cmds: failed, key=qcom,mdss-dsi-vcom-command
674<3>[ 0.986847 / 01-01 00:00:00.979][3] mdss_dsi_parse_dcs_cmds: failed, key=qcom,mdss-dsi-cabc-20-command
675<3>[ 0.986856 / 01-01 00:00:00.979][3] mdss_dsi_parse_dcs_cmds: failed, key=qcom,mdss-dsi-cabc-30-command
676<3>[ 0.986865 / 01-01 00:00:00.979][3] mdss_dsi_parse_dcs_cmds: failed, key=qcom,mdss-dsi-post-panel-on-command
677<3>[ 0.986874 / 01-01 00:00:00.979][3] mdss_dsi_parse_dcs_cmds: failed, key=qcom,mdss-dsi-timing-switch-command
678<6>[ 0.986887 / 01-01 00:00:00.979][3] mdss_dsi_parse_topology_config: cfg_node name config1 lm_split:720x720 pp_split:no
679<6>[ 0.986977 / 01-01 00:00:00.979][3] mdss_dsi_parse_panel_features: partial_update_enabled=1
680<6>[ 0.986990 / 01-01 00:00:00.979][3] mdss_dsi_parse_panel_features: ulps feature enabled
681<6>[ 0.986998 / 01-01 00:00:00.979][3] mdss_dsi_parse_panel_features: ulps during suspend feature enabled
682<6>[ 0.987007 / 01-01 00:00:00.979][3] mdss_dsi_parse_dms_config: dynamic switch feature enabled: 0
683<6>[ 0.987069 / 01-01 00:00:00.979][3] [AOD] init start
684<6>[ 0.987181 / 01-01 00:00:00.979][3] mdss_panel_parse_blex_settings: Configured BL_OTHERS bkltex ctrl
685<3>[ 0.987641 / 01-01 00:00:00.979][3] no supply entry present: lge,extra-supply-entries
686<3>[ 0.987664 / 01-01 00:00:00.979][3] mdss_dsi_parse_ctrl_params:3988 Unable to read qcom,display-id, data= (null),len=20
687<6>[ 0.987699 / 01-01 00:00:00.979][3] mdss_dsi_parse_gpio_params: bklt_en gpio not specified
688<6>[ 0.987739 / 01-01 00:00:00.979][3] lge_mdss_dsi_parse_gpio_params: num_gpios=2
689<3>[ 0.987810 / 01-01 00:00:00.979][3] msm_dss_get_res_byname: 'dsi_phy_regulator' resource not found
690<3>[ 0.987832 / 01-01 00:00:00.979][3] mdss_dsi_retrieve_ctrl_resources+0x168/0x1c4->msm_dss_ioremap_byname: 'dsi_phy_regulator' msm_dss_get_res_byname failed
691<6>[ 0.987840 / 01-01 00:00:00.979][3] mdss_dsi_retrieve_ctrl_resources: ctrl_base=ffffff800198a000 ctrl_size=400 phy_base=ffffff800198c400 phy_size=588
692<6>[ 0.988002 / 01-01 00:00:00.979][3] dsi_panel_device_register: Continuous splash enabled
693<6>[ 0.988662 / 01-01 00:00:00.979][3] mdss_register_panel: adding framebuffer device 994000.qcom,mdss_dsi_ctrl0
694<3>[ 0.989053 / 01-01 00:00:00.979][3] [Display] mdss_dsi_panel_power_ctrl: cur_power_state=0 req_power_state=1
695<6>[ 0.989658 / 01-01 00:00:00.979][3] mdss_dsi_ctrl_probe: Dsi Ctrl->0 initialized, DSI rev:0x10040001, PHY rev:0x2
696<3>[ 0.989863 / 01-01 00:00:00.979][3] mdss_dsi_ctrl 996000.qcom,mdss_dsi_ctrl1: mdss_dsi_ctrl_probe: Cell-index not specified, rc=-22
697<4>[ 0.989882 / 01-01 00:00:00.979][3] mdss_dsi_ctrl: probe of 996000.qcom,mdss_dsi_ctrl1 failed with error -22
698<6>[ 0.991391 / 01-01 00:00:00.989][3] mdss_dsi_status_init: DSI status check interval:5000
699<3>[ 0.992400 / 01-01 00:00:00.989][3] hdmi_tx_get_dt_data: id=0
700<3>[ 0.992409 / 01-01 00:00:00.989][3] hdmi_tx_get_dt_gpio_data: module: 'HDMI_TX_HPD_PM'
701<3>[ 0.992418 / 01-01 00:00:00.989][3] hdmi_tx_get_dt_gpio_data: no gpio
702<3>[ 0.992424 / 01-01 00:00:00.989][3] hdmi_tx_get_dt_gpio_data: module: 'HDMI_TX_DDC_PM'
703<3>[ 0.992432 / 01-01 00:00:00.989][3] hdmi_tx_get_dt_gpio_data: no gpio
704<3>[ 0.992437 / 01-01 00:00:00.989][3] hdmi_tx_get_dt_gpio_data: module: 'HDMI_TX_CORE_PM'
705<3>[ 0.992443 / 01-01 00:00:00.989][3] hdmi_tx_get_dt_gpio_data: no gpio
706<3>[ 0.992449 / 01-01 00:00:00.989][3] hdmi_tx_get_dt_gpio_data: module: 'HDMI_TX_CEC_PM'
707<3>[ 0.992455 / 01-01 00:00:00.989][3] hdmi_tx_get_dt_gpio_data: no gpio
708<3>[ 0.992462 / 01-01 00:00:00.989][3] hdmi_tx_get_dt_vreg_data: module: 'HDMI_TX_HPD_PM'
709<3>[ 0.992477 / 01-01 00:00:00.989][3] hdmi_tx_get_dt_vreg_data: hpd-gdsc min=0, max=0, enable=0 disable=0
710<3>[ 0.992484 / 01-01 00:00:00.989][3] hdmi_tx_get_dt_vreg_data: module: 'HDMI_TX_DDC_PM'
711<3>[ 0.992491 / 01-01 00:00:00.989][3] hdmi_tx_get_dt_vreg_data: no vreg
712<3>[ 0.992496 / 01-01 00:00:00.989][3] hdmi_tx_get_dt_vreg_data: module: 'HDMI_TX_CORE_PM'
713<3>[ 0.992502 / 01-01 00:00:00.989][3] hdmi_tx_get_dt_vreg_data: no vreg
714<3>[ 0.992508 / 01-01 00:00:00.989][3] hdmi_tx_get_dt_vreg_data: module: 'HDMI_TX_CEC_PM'
715<3>[ 0.992514 / 01-01 00:00:00.989][3] hdmi_tx_get_dt_vreg_data: no vreg
716<3>[ 0.992520 / 01-01 00:00:00.989][3] hdmi_tx_get_dt_clk_data: module: 'HDMI_TX_HPD_PM'
717<3>[ 0.992527 / 01-01 00:00:00.989][3] hdmi_tx_get_dt_clk_data: module: 'HDMI_TX_DDC_PM'
718<3>[ 0.992532 / 01-01 00:00:00.989][3] hdmi_tx_get_dt_clk_data: no clk
719<3>[ 0.992538 / 01-01 00:00:00.989][3] hdmi_tx_get_dt_clk_data: module: 'HDMI_TX_CORE_PM'
720<3>[ 0.992543 / 01-01 00:00:00.989][3] hdmi_tx_get_dt_clk_data: module: 'HDMI_TX_CEC_PM'
721<3>[ 0.992549 / 01-01 00:00:00.989][3] hdmi_tx_get_dt_clk_data: no clk
722<3>[ 0.992560 / 01-01 00:00:00.989][3] hdmi_tx_get_dt_data:4581 Unable to read qcom,display-id, data= (null),len=0
723<6>[ 0.993088 / 01-01 00:00:00.989][3] hdmi_tx_init_resource: 'core_physical': start = 0xffffff8001990000, len=0x50c
724<6>[ 0.993100 / 01-01 00:00:00.989][3] hdmi_tx_init_resource: 'qfprom_physical': start = 0xffffff8001998000, len=0x6158
725<6>[ 0.993189 / 01-01 00:00:00.989][3] hdmi_tx_init_resource: 'hdcp_physical': start = 0xffffff8001992000, len=0xfff
726<3>[ 0.993504 / 01-01 00:00:00.989][3] hdmi_tx_check_capability: Features <HDMI:ON, HDCP:ON>
727<6>[ 0.994181 / 01-01 00:00:00.989][3] mdss_register_panel: adding framebuffer device 9a0000.qcom,hdmi_tx
728<3>[ 0.994615 / 01-01 00:00:00.989][3] hdmi_tx_probe: Add child devices.
729<6>[ 0.996330 / 01-01 00:00:00.989][3] mdss_register_panel: adding framebuffer device soc:qcom,mdss_wb_panel
730<3>[ 0.998202 / 01-01 00:00:00.989][3] [MDSS] lge_cd_lpc is not yet ready
731<3>[ 0.998235 / 01-01 00:00:00.989][3] [MDSS] cable 8
732<6>[ 0.998244 / 01-01 00:00:00.989][3] lge,blmap: br_lvl(127) -> bl_lvl(561)
733<6>[ 0.998254 / 01-01 00:00:00.989][3] mdss_fb_probe: fb0: split_mode:1 left:720 right:720
734<6>[ 0.998857 / 01-01 00:00:00.989][3] mdss_fb_register: FrameBuffer[0] 1440x2720 registered successfully!
735<3>[ 0.999227 / 01-01 00:00:00.989][3] mdss_mdp_splash_parse_dt: splash mem child node is not present
736<3>[ 0.999235 / 01-01 00:00:00.989][3] mdss_mdp_splash_parse_dt: no rsvd mem found in DT for splash screen
737<3>[ 0.999241 / 01-01 00:00:00.989][3] mdss_mdp_splash_init: splash memory reserve failed
738<6>[ 0.999255 / 01-01 00:00:00.989][3] vts_register_value_sensor: Register value sensor [led] : weight = 0
739<6>[ 0.999262 / 01-01 00:00:00.989][3] vts_register_value_sensor: Register value sensor [led_sensor] : weight = 1000
740<6>[ 0.999268 / 01-01 00:00:00.989][3] mdss_fb_probe: "led" virtual value sensor is registered.
741<6>[ 0.999310 / 01-01 00:00:00.989][3] mdss_fb_probe: fb1: split_mode:0 left:0 right:0
742<6>[ 0.999369 / 01-01 00:00:00.989][3] mdss_fb_register: FrameBuffer[1] 640x480 registered successfully!
743<3>[ 0.999413 / 01-01 00:00:00.989][3] hdmi_tx_event_handler: event = MDSS_EVENT_FB_REGISTERED suspend=0, hpd_feature=0
744<3>[ 0.999445 / 01-01 00:00:00.989][3] hdmi_tx_sysfs_create: sysfs group ffffffc075a42c10
745<3>[ 0.999453 / 01-01 00:00:00.989][3] hdmi_tx_init_panel: panel initialized
746<3>[ 0.999492 / 01-01 00:00:00.989][3] hdmi_tx_init_hdcp: HDCP 1.4 initialized
747<3>[ 0.999695 / 01-01 00:00:00.989][3] hdmi_tx_init_hdcp: HDCP 2.2 initialized
748<3>[ 0.999740 / 01-01 00:00:00.989][3] hdmi_tx_init_audio: audio initialized
749<6>[ 1.004592 / 01-01 00:00:00.999][3] mdss_fb_probe: fb2: split_mode:0 left:0 right:0
750<6>[ 1.004753 / 01-01 00:00:00.999][3] mdss_fb_register: FrameBuffer[2] 640x480 registered successfully!
751<3>[ 1.004852 / 01-01 00:00:00.999][3] mdss_mdp_splash_parse_dt: splash mem child node is not present
752<3>[ 1.008439 / 01-01 00:00:00.999][3] glink_loopback_server_init: unable to create log context
753<3>[ 1.008580 / 01-01 00:00:00.999][3] msm_smp2p_init: unable to create log context
754<3>[ 1.011488 / 01-01 00:00:01.009][3] qmi_log_init: Unable to create QMI IPC logging for Req/Resp
755<3>[ 1.011505 / 01-01 00:00:01.009][3] logging for Indications: Unable to create QMI IPC qmi_log_init<3>[ 1.015263 / 01-01 00:00:01.009][3] apr_init: Unable to create ipc log context
756<6>[ 1.023447 / 01-01 00:00:01.019][3] l2cache-pmu soc:l2-pmu: Registered L2 cache PMU using 2 HW PMUs
757<5>[ 1.024404 / 01-01 00:00:01.019][3] msm_rpm_log_probe: OK
758<6>[ 1.027846 / 01-01 00:00:01.019][3] subsys-pil-tz ce0000.qcom,venus: for venus segments only will be dumped.
759<6>[ 1.028626 / 01-01 00:00:01.019][3] subsys-pil-tz soc:qcom,kgsl-hyp: for a530_zap segments only will be dumped.
760<4>[ 1.031627 / 01-01 00:00:01.029][3] pil-q6v5-mss 2080000.qcom,mss: Failed to find the pas_id.
761<6>[ 1.033966 / 01-01 00:00:01.029][3] bootlog_probe: start 0x32d5
762<6>[ 1.033985 / 01-01 00:00:01.029][3] bootlog_probe: size 0x1fff4
763<6>[ 1.033991 / 01-01 00:00:01.029][3] -------------------------------------------------
764<6>[ 1.033997 / 01-01 00:00:01.029][3] below logs are got from bootloader
765<6>[ 1.034004 / 01-01 00:00:01.029][3] -------------------------------------------------
766<6>[ 1.034010 / 01-01 00:00:01.029][3]
767<6>[ 1.034069 / 01-01 00:00:01.029][3] B - 465033 - DPE_MEMC_STATUS_0: DDR0 0x0000FFFF, DDR1 0x0000FFFF
768<6>[ 1.034108 / 01-01 00:00:01.029][3] B - 465064 - ch 2, cs 1, mr8 0x08080808
769<6>[ 1.034166 / 01-01 00:00:01.029][3] B - 465064 - DPE_MEMC_STATUS_0: DDR0 0x0000FFFF, DDR1 0x0000FFFF
770<6>[ 1.034239 / 01-01 00:00:01.029][3] B - 465308 - ddr_info: SKH ver=21914 ch=0x3 cs=0x3 rev1=0x4 rev2=0x0 mr8=0x8 hwrev=12
771<6>[ 1.034273 / 01-01 00:00:01.029][3] B - 465308 - ddr_trained[36c,0x3]
772<6>[ 1.034313 / 01-01 00:00:01.029][3] B - 465308 - ddr_initialize_device, Delta
773<6>[ 1.034362 / 01-01 00:00:01.029][3] B - 465338 - DDR ID, Rank 0, Rank 1, 0x6, 0x400, 0x400
774<6>[ 1.034400 / 01-01 00:00:01.029][3] B - 465399 - [DDR] remap_size: 4096MB
775<6>[ 1.034450 / 01-01 00:00:01.029][3] B - 465399 - [DDR] remap_info CS0: 0x80000000, CS1: 0x0
776<6>[ 1.034484 / 01-01 00:00:01.029][3] B - 465521 - Basic DDR tests done
777<6>[ 1.034519 / 01-01 00:00:01.029][3] B - 521458 - boot_pre_longkey_check
778<6>[ 1.034554 / 01-01 00:00:01.029][3] B - 521458 - powerkey release state
779<6>[ 1.034586 / 01-01 00:00:01.029][3] B - 529388 - Image Load, Start
780<6>[ 1.034624 / 01-01 00:00:01.029][3] B - 529480 - bootLUN:1, currentLUN:1
781<6>[ 1.034663 / 01-01 00:00:01.029][3] B - 529480 - xbl is matched with bootLUN
782<6>[ 1.034714 / 01-01 00:00:01.029][3] D - 946 - LGE SBL Image Loaded, Delta - (51579 Bytes)
783<6>[ 1.034746 / 01-01 00:00:01.029][3] B - 530334 - clock_init, Start
784<6>[ 1.034777 / 01-01 00:00:01.029][3] B - 530669 - Image Load, Start
785<6>[ 1.034834 / 01-01 00:00:01.029][3] D - 3904 - QSEE Dev Config Image Loaded, Delta - (46200 Bytes)
786<6>[ 1.034866 / 01-01 00:00:01.029][3] B - 534970 - Image Load, Start
787<6>[ 1.034915 / 01-01 00:00:01.029][3] D - 2531 - APDP Image Loaded, Delta - (7768 Bytes)
788<6>[ 1.034947 / 01-01 00:00:01.029][3] B - 552263 - Image Load, Start
789<6>[ 1.034997 / 01-01 00:00:01.029][3] D - 55297 - QSEE Image Loaded, Delta - (1640904 Bytes)
790<6>[ 1.035029 / 01-01 00:00:01.029][3] B - 607560 - Image Load, Start
791<6>[ 1.035068 / 01-01 00:00:01.029][3] B - 608109 - QFPROM flag != QFPROMblown
792<6>[ 1.035115 / 01-01 00:00:01.029][3] D - 549 - SEC Image Loaded, Delta - (4116 Bytes)
793<6>[ 1.035157 / 01-01 00:00:01.029][3] B - 608688 - sbl1_efs_handle_cookies, Start
794<6>[ 1.035198 / 01-01 00:00:01.029][3] D - 91 - sbl1_efs_handle_cookies, Delta
795<6>[ 1.035229 / 01-01 00:00:01.029][3] B - 608780 - Image Load, Start
796<6>[ 1.035279 / 01-01 00:00:01.029][3] D - 12017 - QHEE Image Loaded, Delta - (254192 Bytes)
797<6>[ 1.035310 / 01-01 00:00:01.029][3] B - 620827 - Image Load, Start
798<6>[ 1.035361 / 01-01 00:00:01.029][3] D - 11072 - RPM Image Loaded, Delta - (223932 Bytes)
799<6>[ 1.035392 / 01-01 00:00:01.029][3] B - 631929 - Image Load, Start
800<6>[ 1.035437 / 01-01 00:00:01.029][3] D - 0 - STI Image Loaded, Delta - (0 Bytes)
801<6>[ 1.035467 / 01-01 00:00:01.029][3] B - 632722 - cable type is 8
802<6>[ 1.035521 / 01-01 00:00:01.029][3] B - 807731 - pm_app_smbchg: TA/USB attached, battery present
803<6>[ 1.035567 / 01-01 00:00:01.029][3] B - 807792 - Charger source: SDP before APSD rerun
804<6>[ 1.035617 / 01-01 00:00:01.029][3] B - 808616 - [ADC][mvol=1790][hw_rev_table[12]=[1700]
805<6>[ 1.035662 / 01-01 00:00:01.029][3] B - 816637 - [Display] SW49407_QHD_DSC_CMD_PANEL
806<6>[ 1.035697 / 01-01 00:00:01.029][3] B - 816637 - panel_type = CMD_PANEL
807<6>[ 1.035731 / 01-01 00:00:01.029][3] B - 823957 - Panel power on done
808<6>[ 1.035766 / 01-01 00:00:01.029][3] B - 823988 - soc_version:0x00030001
809<6>[ 1.035800 / 01-01 00:00:01.029][3] B - 869311 - Panel pre init done
810<6>[ 1.035863 / 01-01 00:00:01.029][3] [0] logbuf_relocate_sbl_log: log_start=0x85e11040, log_size=0x815, end_time=0
811<6>[ 1.035882 / 01-01 00:00:01.029][3] [0] welcome to lk
812<6>[ 1.035889 / 01-01 00:00:01.029][3]
813<6>[ 1.035909 / 01-01 00:00:01.029][3] [10] platform_init()
814<6>[ 1.035929 / 01-01 00:00:01.029][3] [10] target_init()
815<6>[ 1.035949 / 01-01 00:00:01.029][3] [10] RPM GLink Init
816<6>[ 1.035982 / 01-01 00:00:01.029][3] [10] Opening RPM Glink Port success
817<6>[ 1.036013 / 01-01 00:00:01.029][3] [10] Opening SSR Glink Port success
818<6>[ 1.036060 / 01-01 00:00:01.029][3] [10] Glink Connection between APPS and RPM established
819<6>[ 1.036106 / 01-01 00:00:01.029][3] [10] Glink Connection between APPS and RPM established
820<6>[ 1.036165 / 01-01 00:00:01.029][3] [20] bootmode_set_board_revision: board revision value is 12 from smem
821<6>[ 1.036194 / 01-01 00:00:01.029][3] [20] HW Rev(12), vol_up gpio(2)
822<6>[ 1.036216 / 01-01 00:00:01.029][3] [30] UFS init success
823<6>[ 1.036254 / 01-01 00:00:01.029][3] [70] SW3800_Authentication [vendor code: 1]
824<6>[ 1.036288 / 01-01 00:00:01.029][3] [110] set_dload_mode: download_mode:0
825<6>[ 1.036326 / 01-01 00:00:01.029][3] [120] [KSwitch] ftm kill switch item value=
826<6>[ 1.036389 / 01-01 00:00:01.029][3] [120] [KSwitch] (kswitch_load_flag): ftm kill switch item has invalid format
827<6>[ 1.036411 / 01-01 00:00:01.029][3] [120] batt_info = 187
828<6>[ 1.036467 / 01-01 00:00:01.029][3] [120] bootmode_set_cable: usb cable type/port type is 8/3 from smem
829<6>[ 1.036486 / 01-01 00:00:01.029][3] [120] get_qem = 0
830<6>[ 1.036527 / 01-01 00:00:01.029][3] [120] [emmc_one_binary] target partition updates
831<6>[ 1.036568 / 01-01 00:00:01.029][3] [120] [emmc_one_binary] userdata partition set
832<6>[ 1.036630 / 01-01 00:00:01.029][3] [120] [emmc_one_binary] card size 63677923328 Byte, card_sec_count 15546368
833<6>[ 1.036660 / 01-01 00:00:01.029][3] [150] PROTECTIVE_MBR_SIZE = 4096
834<6>[ 1.036699 / 01-01 00:00:01.029][3] [150] [emmc_one_binary] backup_lba 15546367
835<6>[ 1.036742 / 01-01 00:00:01.029][3] [150] [emmc_one_binary] Don't need to update GPT.
836<6>[ 1.036772 / 01-01 00:00:01.029][3] [150] Qseecom Init Done in Appsbl
837<6>[ 1.036877 / 01-01 00:00:01.029][3] [150] secure app region addr=0x86600000 size=0x1a00000[150] TZ App region notif returned with status:0 addr:86600000 size:27262976
838<6>[ 1.036943 / 01-01 00:00:01.029][3] [150] TZ App log region register returned with status:0 addr:9191d000 size:4096
839<6>[ 1.036976 / 01-01 00:00:01.029][3] [150] Qseecom TZ Init Done in Appsbl
840<6>[ 1.037001 / 01-01 00:00:01.029][3] [210] Loading cmnlib done
841<6>[ 1.037056 / 01-01 00:00:01.029][3] [210] qseecom_start_app: Loading app keymaster for the first time'
842<6>[ 1.037094 / 01-01 00:00:01.029][3] [240] <8>keymaster: "\"KEYMASTER Init \""
843<6>[ 1.037139 / 01-01 00:00:01.029][3] [240] GPIO 64 Drive stength set to 16mA and gpio_set
844<6>[ 1.037166 / 01-01 00:00:01.029][3] [240] LK SEC APP Handle: 0x1
845<6>[ 1.037214 / 01-01 00:00:01.029][3] [240] <8>keymaster: "\"open_add_km_partition status:0\""
846<6>[ 1.037241 / 01-01 00:00:01.029][3] [250] Device unlock statue 1
847<6>[ 1.037267 / 01-01 00:00:01.029][3] [250] Device unlock count 1
848<6>[ 1.037293 / 01-01 00:00:01.029][3] [250] Device flash count 0
849<6>[ 1.037313 / 01-01 00:00:01.029][3] [250] PIF_DETECT:8
850<6>[ 1.037345 / 01-01 00:00:01.029][3] [250] [Display]backlight level: 793
851<6>[ 1.037365 / 01-01 00:00:01.029][3] [250] PIF_DETECT:8
852<6>[ 1.037397 / 01-01 00:00:01.029][3] [250] [Display]backlight level: 189
853<6>[ 1.037439 / 01-01 00:00:01.029][3] [260] [Display]panel name: sw49407_qhd_dsc_cmd
854<6>[ 1.037471 / 01-01 00:00:01.029][3] [260] [Display]vddio_en_gpio : 69
855<6>[ 1.037507 / 01-01 00:00:01.029][3] [260] oem.panel D : sw49407_qhd_dsc_cmd
856<6>[ 1.037545 / 01-01 00:00:01.029][3] [260] OEM panel override:sw49407_qhd_dsc_cmd
857<6>[ 1.037601 / 01-01 00:00:01.029][3] [260] topology config-1 not supported. fallback to default config1
858<6>[ 1.037630 / 01-01 00:00:01.029][3] [260] panel_operating_mode=0x2
859<6>[ 1.037664 / 01-01 00:00:01.029][3] [260] Return value from recv_data: 14
860<6>[ 1.037697 / 01-01 00:00:01.029][3] [270] Return value from recv_data: 14
861<6>[ 1.037728 / 01-01 00:00:01.029][3] [290] [Display] IBB REVISION4 is 1
862<6>[ 1.037769 / 01-01 00:00:01.029][3] [330] msm_display_init: chargerlogo mode check
863<6>[ 1.037805 / 01-01 00:00:01.029][3] [330] pm8x41_get_is_cold_boot: Warm boot
864<6>[ 1.037855 / 01-01 00:00:01.029][3] [330] target_check_chargerlogo_mode: chargerlogo mode check
865<6>[ 1.037920 / 01-01 00:00:01.029][3] [330] target_check_chargerlogo_mode: cold_boot=0, pon1=33, key=0, cable_type=8
866<6>[ 1.037941 / 01-01 00:00:01.029][3] [390] lglogo_image.
867<6>[ 1.037967 / 01-01 00:00:01.029][3] [390] Config MIPI_CMD_PANEL.
868<6>[ 1.037995 / 01-01 00:00:01.029][3] [530] Turn on MIPI_CMD_PANEL.
869<6>[ 1.038022 / 01-01 00:00:01.029][3] [530] Configure GPIO success
870<6>[ 1.038066 / 01-01 00:00:01.029][3] [540] [Display][lm3697] read reg[0x21] level = 189
871<6>[ 1.038095 / 01-01 00:00:01.029][3] [540] HW Rev(12), vol_up gpio(2)
872<6>[ 1.038134 / 01-01 00:00:01.029][3] [540] target_home_key: should be implemented
873<6>[ 1.038197 / 01-01 00:00:01.029][3] [540] selectmode_get_current_key_info: vol_up=0, vol_down=0, power=0, home=0
874<6>[ 1.038254 / 01-01 00:00:01.029][3] [540] selectmode_check_usb_cable: with usb cable. not factory cable
875<6>[ 1.038300 / 01-01 00:00:01.029][3] [540] target_selectmode_init: selectmode_get_mode()=0
876<6>[ 1.038315 / 01-01 00:00:01.029][3] [540] SM_NONE
877<6>[ 1.038338 / 01-01 00:00:01.029][3] [540] webdload status:0
878<6>[ 1.038364 / 01-01 00:00:01.029][3] [540] dload_reboot status:0
879<6>[ 1.038400 / 01-01 00:00:01.029][3] [540] pm8x41_get_is_cold_boot: Warm boot
880<6>[ 1.038424 / 01-01 00:00:01.029][3] [540] webdload status:0
881<6>[ 1.038457 / 01-01 00:00:01.029][3] [540] LGFTM_LAF_MID_REBOOT_FLAG is 0
882<6>[ 1.038514 / 01-01 00:00:01.029][3] [540] bootcmd_add_pair: value changed from to LG-H918 at model.name
883<6>[ 1.038569 / 01-01 00:00:01.029][3] [540] bootcmd_add_pair: value changed from to rev_10 at lge.rev
884<6>[ 1.038627 / 01-01 00:00:01.029][3] [540] bootcmd_add_pair: value changed from to 400MA at bootcable.type
885<6>[ 1.038686 / 01-01 00:00:01.029][3] [540] bootcmd_add_pair: value changed from to SW3800_VC0 at lge.battid
886<6>[ 1.038739 / 01-01 00:00:01.029][3] [540] bootmode_set_ddr_info: DDR Size info 4294967296 from smem
887<6>[ 1.038786 / 01-01 00:00:01.029][3] [540] bootmode_set_ddr_info: DDR MR info 0x6 from smem
888<6>[ 1.038826 / 01-01 00:00:01.029][3] [540] [CCAudit] Start-up BOOT MODE = recovery
889<6>[ 1.038887 / 01-01 00:00:01.029][3] [540] bootcmd_add_pair: value changed from to recovery at lge.bootreason
890<6>[ 1.038952 / 01-01 00:00:01.029][3] [540] bootcmd_add_pair: value changed from to 0x77665502 at lge.bootreasoncode
891<6>[ 1.038975 / 01-01 00:00:01.029][3] [540] MSM8996 ver : 0x3
892<6>[ 1.039007 / 01-01 00:00:01.029][3] [540] UFS FORCE Reset count : 0x0
893<6>[ 1.039026 / 01-01 00:00:01.029][3] [540] get_qem = 0
894<6>[ 1.039044 / 01-01 00:00:01.029][3] [540] get_qem = 0
895<6>[ 1.039098 / 01-01 00:00:01.029][3] [540] bootmode_set_factory: put cable_type(8) and qem(0) to smem
896<6>[ 1.039136 / 01-01 00:00:01.029][3] [540] CHARGERLOGO: reboot_mode = 0x77665502
897<6>[ 1.039184 / 01-01 00:00:01.029][3] [540] CHARGERLOGO: boot_into_chargerlogo = 0 (Recovery)
898<6>[ 1.039204 / 01-01 00:00:01.029][3] [540] is_update_gpt
899<6>[ 1.039226 / 01-01 00:00:01.029][3] [540] is_update_gpt: 0
900<6>[ 1.039254 / 01-01 00:00:01.029][3] [540] [LAF] boot_into_laf = 0
901<6>[ 1.039293 / 01-01 00:00:01.029][3] [540] Unable to locate /bootselect partition
902<6>[ 1.039329 / 01-01 00:00:01.029][3] [540] [KSwitch] check kill switch feature
903<6>[ 1.039382 / 01-01 00:00:01.029][3] [540] [KSwitch] check done (do nothing): valid=true, flasg=0x0
904<6>[ 1.039405 / 01-01 00:00:01.029][3] [540] now sniffing = 0
905<6>[ 1.039425 / 01-01 00:00:01.029][3] [540] cc mode 0!!!
906<6>[ 1.039475 / 01-01 00:00:01.029][3] [540] bootcmd_add_pair: value changed from to 0 at cc_mode
907<6>[ 1.039504 / 01-01 00:00:01.029][3] [540] get_encrypt_on_minios = 0
908<6>[ 1.039533 / 01-01 00:00:01.029][3] [540] get_encrypt_on_minios = 0
909<6>[ 1.039564 / 01-01 00:00:01.029][3] [540] LGE_DMS - CRC = 0 STAGE= 0
910<6>[ 1.039596 / 01-01 00:00:01.029][3] [540] boot from recovery partition
911<6>[ 1.039621 / 01-01 00:00:01.029][3] [540] Device is unlocked!
912<6>[ 1.039663 / 01-01 00:00:01.029][3] [540] Loading (recovery) image (25047040): start
913<6>[ 1.039705 / 01-01 00:00:01.029][3] [720] Loading (recovery) image (25047040): done
914<6>[ 1.039752 / 01-01 00:00:01.029][3] [720] use_signed_kernel=1, is_unlocked=1, is_tampered=0.
915<6>[ 1.039799 / 01-01 00:00:01.029][3] [720] Authenticating /recovery image (25047040): start
916<6>[ 1.039843 / 01-01 00:00:01.029][3] [720] boot_verifier: Device is in ORANGE boot state.
917<6>[ 1.039885 / 01-01 00:00:01.029][3] [720] boot_verifier: Skipping boot verification.
918<6>[ 1.039930 / 01-01 00:00:01.029][3] [720] boot_verifier: Device is in ORANGE boot state.
919<6>[ 1.039976 / 01-01 00:00:01.029][3] [720] Authenticating boot image: done return value = 0
920<6>[ 1.040019 / 01-01 00:00:01.029][3] [720] [CCAudit] Authenticating boot image: Success
921<6>[ 1.040185 / 01-01 00:00:01.039][3] [720] partition size, image size, round size : 4194304, 4060036, 4063232
922<6>[ 1.040212 / 01-01 00:00:01.039][3] [760] Raw resources verified.
923<6>[ 1.040274 / 01-01 00:00:01.039][3] [760] display_boot_state : verifiedboot_orange_01, verifiedboot_orange_02,
924<6>[ 1.040320 / 01-01 00:00:01.039][3] [800] read_image_info_from_emmc: total_image_num (53)
925<6>[ 1.040369 / 01-01 00:00:01.039][3] [800] get_image_info: Finding image verifiedboot_orange_01
926<6>[ 1.040418 / 01-01 00:00:01.039][3] [800] get_image_info: img_info[0].name quick_lglogo_image
927<6>[ 1.040468 / 01-01 00:00:01.039][3] [800] get_image_info: img_info[1].name load_charger_image
928<6>[ 1.040525 / 01-01 00:00:01.039][3] [800] get_image_info: img_info[2].name battery_insert_nt_module_image
929<6>[ 1.040569 / 01-01 00:00:01.039][3] [800] get_image_info: img_info[3].name NT_TYPE_CM1
930<6>[ 1.040612 / 01-01 00:00:01.039][3] [800] get_image_info: img_info[4].name NT_TYPE_CM2
931<6>[ 1.040656 / 01-01 00:00:01.039][3] [800] get_image_info: img_info[5].name NT_TYPE_CM3
932<6>[ 1.040704 / 01-01 00:00:01.039][3] [800] get_image_info: img_info[6].name NT_TYPE_ERROR_MAX
933<6>[ 1.040752 / 01-01 00:00:01.039][3] [800] get_image_info: img_info[7].name NT_TYPE_ERROR_MIN
934<6>[ 1.040803 / 01-01 00:00:01.039][3] [800] get_image_info: img_info[8].name NT_TYPE_ERROR_UNKNOWN
935<6>[ 1.040853 / 01-01 00:00:01.039][3] [800] get_image_info: img_info[9].name NT_TYPE_EU_AUSTRALIA
936<6>[ 1.040901 / 01-01 00:00:01.039][3] [800] get_image_info: img_info[10].name NT_TYPE_EU_GLOBAL
937<6>[ 1.040946 / 01-01 00:00:01.039][3] [800] get_image_info: img_info[11].name NT_TYPE_HM1
938<6>[ 1.040991 / 01-01 00:00:01.039][3] [800] get_image_info: img_info[12].name NT_TYPE_HM2
939<6>[ 1.041038 / 01-01 00:00:01.039][3] [800] get_image_info: img_info[13].name NT_TYPE_JP_KDDI
940<6>[ 1.041084 / 01-01 00:00:01.039][3] [800] get_image_info: img_info[14].name NT_TYPE_KR_KT
941<6>[ 1.041131 / 01-01 00:00:01.039][3] [800] get_image_info: img_info[15].name NT_TYPE_KR_LGU
942<6>[ 1.041177 / 01-01 00:00:01.039][3] [800] get_image_info: img_info[16].name NT_TYPE_KR_SKT
943<6>[ 1.041225 / 01-01 00:00:01.039][3] [800] get_image_info: img_info[17].name NT_TYPE_NA_ATT
944<6>[ 1.041271 / 01-01 00:00:01.039][3] [800] get_image_info: img_info[18].name NT_TYPE_NA_SPR
945<6>[ 1.041318 / 01-01 00:00:01.039][3] [800] get_image_info: img_info[19].name NT_TYPE_NA_TMUS
946<6>[ 1.041364 / 01-01 00:00:01.039][3] [800] get_image_info: img_info[20].name NT_TYPE_NA_VZW
947<6>[ 1.041413 / 01-01 00:00:01.039][3] [800] get_image_info: img_info[21].name NT_TYPE_RESERVED1
948<6>[ 1.041461 / 01-01 00:00:01.039][3] [800] get_image_info: img_info[22].name NT_TYPE_RESERVED2
949<6>[ 1.041506 / 01-01 00:00:01.039][3] [800] get_image_info: img_info[23].name downloadmode
950<6>[ 1.041555 / 01-01 00:00:01.039][3] [800] get_image_info: img_info[24].name factory_reset_image
951<6>[ 1.041612 / 01-01 00:00:01.039][3] [800] get_image_info: img_info[25].name factory_reset_1st_line_image
952<6>[ 1.041669 / 01-01 00:00:01.039][3] [800] get_image_info: img_info[26].name factory_reset_2nd_line_image
953<6>[ 1.041725 / 01-01 00:00:01.039][3] [800] get_image_info: img_info[27].name factory_reset_no_1st_image
954<6>[ 1.041781 / 01-01 00:00:01.039][3] [800] get_image_info: img_info[28].name factory_reset_yes_1st_image
955<6>[ 1.041836 / 01-01 00:00:01.039][3] [800] get_image_info: img_info[29].name factory_reset_no_2nd_image
956<6>[ 1.041892 / 01-01 00:00:01.039][3] [800] get_image_info: img_info[30].name factory_reset_yes_2nd_image
957<6>[ 1.041939 / 01-01 00:00:01.039][3] [800] get_image_info: img_info[31].name kswitch_factory
958<6>[ 1.041985 / 01-01 00:00:01.039][3] [800] get_image_info: img_info[32].name kswitch_dload
959<6>[ 1.042040 / 01-01 00:00:01.039][3] [800] get_image_info: img_info[33].name system_recovery_menu_image
960<6>[ 1.042100 / 01-01 00:00:01.039][3] [800] get_image_info: img_info[34].name system_recovery_continue_image
961<6>[ 1.042159 / 01-01 00:00:01.039][3] [800] get_image_info: img_info[35].name system_recovery_wipecache_image
962<6>[ 1.042220 / 01-01 00:00:01.039][3] [800] get_image_info: img_info[36].name system_recovery_factoryreset_image
963<6>[ 1.042280 / 01-01 00:00:01.039][3] [800] get_image_info: img_info[37].name system_recovery_powerdown_image
964<6>[ 1.042338 / 01-01 00:00:01.039][3] [800] get_image_info: img_info[38].name system_recovery_safemode_image
965<6>[ 1.042396 / 01-01 00:00:01.039][3] [800] get_image_info: img_info[39].name system_recovery_usbmode_image
966<6>[ 1.042451 / 01-01 00:00:01.039][3] [800] get_image_info: img_info[40].name LGE_PM_NO_BATTERY_QUESTION
967<6>[ 1.042505 / 01-01 00:00:01.039][3] [800] get_image_info: img_info[41].name LGE_PM_NO_BATTERY_EMPTY
968<6>[ 1.042554 / 01-01 00:00:01.039][3] [800] get_image_info: img_info[42].name LGE_PM_NO_CHARGER
969<6>[ 1.042607 / 01-01 00:00:01.039][3] [800] get_image_info: img_info[43].name LGE_PM_WEAK_CHARGING_ON
970<6>[ 1.042654 / 01-01 00:00:01.039][3] [800] get_image_info: img_info[44].name imei_main_image
971<6>[ 1.042703 / 01-01 00:00:01.039][3] [800] get_image_info: img_info[45].name imei_guide_image
972<6>[ 1.042749 / 01-01 00:00:01.039][3] [800] get_image_info: img_info[46].name system_errlogo
973<6>[ 1.042799 / 01-01 00:00:01.039][3] [800] get_image_info: img_info[47].name verifiedboot_red_01
974<6>[ 1.042850 / 01-01 00:00:01.039][3] [800] get_image_info: img_info[48].name verifiedboot_red_02
975<6>[ 1.042902 / 01-01 00:00:01.039][3] [800] get_image_info: img_info[49].name verifiedboot_orange_01
976<6>[ 1.042954 / 01-01 00:00:01.039][3] [860] display_boot_state: decompress time:0 key rel:0 paused:0
977<6>[ 1.042982 / 01-01 00:00:01.039][3] [5950] LK SEC APP Handle: 0x1
978<6>[ 1.043016 / 01-01 00:00:01.039][3] [5950] Input digest : 0x00000001(36)
979<6>[ 1.043054 / 01-01 00:00:01.039][3] [5950] decompressing lz4 kernel image: start
980<6>[ 1.043090 / 01-01 00:00:01.039][3] [6000] decompressing kernel image: done
981<6>[ 1.043160 / 01-01 00:00:01.039][3] [6010] Best match DTB tags 246/00000c08/0x00000000/30001/20009/10013/0/0/92df9d48/562bc
982<6>[ 1.043227 / 01-01 00:00:01.039][3] [6010] Using pmic info 0x20009/0x10013/0x0/0x0 for device 0x20009/0x10113/0x0/0x0
983<6>[ 1.043275 / 01-01 00:00:01.039][3] [6010] dm-verity mode switches to enforcing mode.(1,0,0)
984<6>[ 1.043306 / 01-01 00:00:01.039][3] [6010] => KSUT verifier enabled
985<6>[ 1.043338 / 01-01 00:00:01.039][3] [6010] ksut_global_msm8992 is loaded
986<6>[ 1.043360 / 01-01 00:00:01.039][3] [6010] No unlock key!
987<6>[ 1.043410 / 01-01 00:00:01.039][3] [6010] [CCAudit] Enter the boot_linux for kernel startup,,,
988<6>[ 1.043439 / 01-01 00:00:01.039][3] [6010] bootcmd: lge.rev=rev_10
989<6>[ 1.043470 / 01-01 00:00:01.039][3] [6010] bootcmd: model.name=LG-H918
990<6>[ 1.043505 / 01-01 00:00:01.039][3] [6010] bootcmd: lge.bootreason=recovery
991<6>[ 1.043529 / 01-01 00:00:01.039][3] [6010] bootcmd: cc_mode=0
992<6>[ 1.043552 / 01-01 00:00:01.039][3] [6010] bootcmd: kswitch
993<6>[ 1.043592 / 01-01 00:00:01.039][3] [6010] bootcmd: lge.bootreasoncode=0x77665502
994<6>[ 1.043625 / 01-01 00:00:01.039][3] [6010] bootcmd: bootcable.type=400MA
995<6>[ 1.043658 / 01-01 00:00:01.039][3] [6010] bootcmd: lge.battid=SW3800_VC0
996<6>[ 1.043703 / 01-01 00:00:01.039][3] [6010] bootcmd: androidboot.bl_unlock_complete=true
997<6>[ 1.043739 / 01-01 00:00:01.039][3] [6010] bootcmd: androidboot.dlcomplete=0
998<6>[ 1.043780 / 01-01 00:00:01.039][3] [6010] bootcmd: androidboot.ddr_size=4294967296
999<6>[ 1.043816 / 01-01 00:00:01.039][3] [6010] bootcmd: androidboot.ddr_info=0x6
1000<6>[ 1.043849 / 01-01 00:00:01.039][3] [6010] bootcmd: lge.crash_handler=off
1001<6>[ 1.043878 / 01-01 00:00:01.039][3] [6010] bootcmd: lge.hreset=off
1002<6>[ 1.043906 / 01-01 00:00:01.039][3] [6010] bootcmd: boot_cpus=0-3
1003<6>[ 1.043941 / 01-01 00:00:01.039][3] [6010] bootcmd: androidboot.revision=12
1004<6>[ 1.043975 / 01-01 00:00:01.039][3] [6010] bootcmd: lge.signed_image=false
1005<6>[ 1.044021 / 01-01 00:00:01.039][3] [6010] bootcmd: androidboot.verifiedbootstate=orange
1006<6>[ 1.044063 / 01-01 00:00:01.039][3] [6010] bootcmd: androidboot.veritymode=enforcing
1007<6>[ 1.044099 / 01-01 00:00:01.039][3] [6010] bootcmd: androidboot.rpmb_state=1
1008<6>[ 1.044136 / 01-01 00:00:01.039][3] [6010] pm8x41_get_is_cold_boot: Warm boot
1009<6>[ 1.044206 / 01-01 00:00:01.039][3] [6010] target_pause_for_battery_charge : pon_reason is 33 cold_boot:0 charger path: 4
1010<6>[ 1.044233 / 01-01 00:00:01.039][3] [6010] PON_PON_PBL_STATUS:0x0
1011<6>[ 1.044260 / 01-01 00:00:01.039][3] [6010] PON_PON_REASON1:0x21
1012<6>[ 1.044291 / 01-01 00:00:01.039][3] [6010] PON_WARM_RESET_REASON1:0x2
1013<6>[ 1.044321 / 01-01 00:00:01.039][3] [6010] PON_WARM_RESET_REASON2:0x0
1014<6>[ 1.044348 / 01-01 00:00:01.039][3] [6010] PON_POFF_REASON1:0x2
1015<6>[ 1.044375 / 01-01 00:00:01.039][3] [6010] PON_POFF_REASON2:0x0
1016<6>[ 1.044405 / 01-01 00:00:01.039][3] [6010] PON_SOFT_RESET_REASON1:0x0
1017<6>[ 1.044436 / 01-01 00:00:01.039][3] [6010] PON_SOFT_RESET_REASON2:0x0
1018<6>[ 1.044465 / 01-01 00:00:01.039][3] [6010] TEMP_ALARM_STATUS1:0x80
1019<6>[ 1.044499 / 01-01 00:00:01.039][3] [6010] SMBCHG_USB_CHGPTH_INT_RT_STS:0x4
1020<6>[ 1.044544 / 01-01 00:00:01.039][3] [6010] target_pause_for_battery_charge: normal boot
1021<6>[ 1.044581 / 01-01 00:00:01.039][3] [6010] oem.panel D : sw49407_qhd_dsc_cmd
1022<6>[ 1.044675 / 01-01 00:00:01.039][3] [6010] display kernel cmdline: mdss_mdp.panel=1:dsi:0:qcom,mdss_dsi_sw49407_dsc_qhd_cmd:config1:1:none:cfg:single_dsi
1023<6>[ 1.044712 / 01-01 00:00:01.039][3] [6010] pm8x41_get_is_cold_boot: Warm boot
1024<6>[ 1.044954 / 01-01 00:00:01.039][3] [6010] cmdline: console=ttyHSL0,115200,n8 androidboot.console=ttyHSL0 user_debug=31 ehci-hcd.park=3 lpm_levels.sleep_disabled=1 cma=32M@0-0xffffffff androidboot.hardware=elsa androidboot.bootdevice=624000.ufshc androidboot.selinux=permissive lge.rev=rev_10 model[6010] bootcmd_list_deinit : remove all bootcmd_arg
1025<6>[ 1.044987 / 01-01 00:00:01.039][3] [6010] Updating device tree: start
1026<6>[ 1.045018 / 01-01 00:00:01.039][3] [6010] Updating device tree: done
1027<6>[ 1.045054 / 01-01 00:00:01.039][3] [6010] oem.panel D : sw49407_qhd_dsc_cmd
1028<6>[ 1.045083 / 01-01 00:00:01.039][3] [6010] Turn off MIPI_CMD_PANEL.
1029<6>[ 1.045129 / 01-01 00:00:01.039][3] [6010] Continuous splash enabled, keeping panel alive.
1030<6>[ 1.045153 / 01-01 00:00:01.039][3] [6020] RPM GLINK UnInit
1031<6>[ 1.045186 / 01-01 00:00:01.039][3] [6020] Qseecom De-Init Done in Appsbl
1032<6>[ 1.045264 / 01-01 00:00:01.039][3] [6020] booting linux @ 0x80080000, ramdisk @ 0x82200000 (6884555), tags/device tree @ 0x82000000
1033<6>[ 1.045297 / 01-01 00:00:01.039][3] [6020] Jumping to kernel via monitor
1034<6>[ 1.045303 / 01-01 00:00:01.039][3]
1035<6>[ 1.045310 / 01-01 00:00:01.039][3] bootlog_probe: token (null)
1036<6>[ 1.045315 / 01-01 00:00:01.039][3] -------------------------------------------------
1037<4>[ 1.045327 / 01-01 00:00:01.039][3] Trying to free nonexistent resource <00000000c00c0000-00000000c00dffff>
1038<6>[ 1.046801 / 01-01 00:00:01.039][3] [UART CONSOLE][earjack_debugger_probe] disable uart console
1039<6>[ 1.046825 / 01-01 00:00:01.039][3] earjack debugger probed
1040<3>[ 1.049460 / 01-01 00:00:01.039][3] LGE GPIO debugger init done
1041<6>[ 1.049745 / 01-01 00:00:01.039][3] [QFUSE]lge_qfprom_probe : qfprom init
1042<3>[ 1.050970 / 01-01 00:00:01.049][3] [LGE-ADC] lge_adc_qct_probe : lge_battery_probe starts!!!
1043<3>[ 1.051112 / 01-01 00:00:01.049][3] [LGE-ADC] lge_adc_qct_probe : Not yet initializing pm-vadc
1044<6>[ 1.052019 / 01-01 00:00:01.049][3] [LGE-CD] cable_detect_probe : lge_cable_detect probe start!
1045<3>[ 1.052061 / 01-01 00:00:01.049][3] [LGE-CD] cable_detect_probe : lge_adc property failed to get
1046<6>[ 1.053034 / 01-01 00:00:01.049][3] [LGE-CC] lge_charging_controller_probe : LG Charging controller probe done~!!
1047<6>[ 1.053065 / 01-01 00:00:01.049][3] lge_power_changed_work
1048<6>[ 1.054011 / 01-01 00:00:01.049][3] [LGE-HW_REV] lge_hw_rev_probe : Probe Start~!!
1049<6>[ 1.054025 / 01-01 00:00:01.049][3] [LGE-HW_REV] lge_hw_rev_probe : HW_REV : rev_10
1050<3>[ 1.054125 / 01-01 00:00:01.049][3] [LGE-HW_REV] lge_hw_rev_probe : Probe done~!!
1051<6>[ 1.054147 / 01-01 00:00:01.049][3] lge_power_changed_work
1052<6>[ 1.055049 / 01-01 00:00:01.049][3] [LGE-SM] lge_store_mode_probe : LG Store mode probe Start~!!
1053<6>[ 1.055150 / 01-01 00:00:01.049][3] [LGE-SM] lge_store_mode_probe : LG store mode probe done~!!
1054<6>[ 1.055170 / 01-01 00:00:01.049][3] lge_power_changed_work
1055<4>[ 1.055496 / 01-01 00:00:01.049][3] msm_serial_hs_init: error creating logging context
1056<3>[ 1.057354 / 01-01 00:00:01.049][3] sps: BAM device 0x0000000007544000 is not registered yet.
1057<6>[ 1.057386 / 01-01 00:00:01.049][3] sps:BAM 0x0000000007544000 is registered.
1058<6>[ 1.058650 / 01-01 00:00:01.049][3] 7570000.uart: ttyHS0 at MMIO 0x7570000 (irq = 18, base_baud = 460800) is a MSM HS UART
1059<6>[ 1.061817 / 01-01 00:00:01.059][3] msm_serial_hsl_probe: detected port #0 (ttyHSL0)
1060<3>[ 1.061881 / 01-01 00:00:01.059][3] AXI: get_pdata(): Error: Client name not found
1061<3>[ 1.061888 / 01-01 00:00:01.059][3] AXI: msm_bus_cl_get_pdata(): client has to provide missing entry for successful registration
1062<3>[ 1.061895 / 01-01 00:00:01.059][3] msm_serial_hsl_probe: Bus scaling is disabled
1063<6>[ 1.062028 / 01-01 00:00:01.059][3] 75b0000.serial: ttyHSL0 at MMIO 0x75b0000 (irq = 12, base_baud = 460800) is a MSM
1064<6>[ 1.062122 / 01-01 00:00:01.059][3] msm_hsl_console_setup: console setup on port #0
1065<6>[ 1.064263 / 01-01 00:00:01.059][3] console [ttyHSL0] enabled
1066<6>[ 1.065200 / 01-01 00:00:01.059][3] msm_serial_hsl_probe: detected port #1 (ttyHSL1)
1067<3>[ 1.065280 / 01-01 00:00:01.059][3] AXI: get_pdata(): Error: Client name not found
1068<3>[ 1.065287 / 01-01 00:00:01.059][3] AXI: msm_bus_cl_get_pdata(): client has to provide missing entry for successful registration
1069<3>[ 1.065293 / 01-01 00:00:01.059][3] msm_serial_hsl_probe: Bus scaling is disabled
1070<6>[ 1.065391 / 01-01 00:00:01.059][3] 7574000.serial: ttyHSL1 at MMIO 0x7574000 (irq = 414, base_baud = 460800) is a MSM
1071<6>[ 1.065802 / 01-01 00:00:01.059][3] msm_serial_hsl_init: driver initialized
1072<3>[ 1.065829 / 01-01 00:00:01.069][3] smd_tty_log_init: Unable to create IPC log
1073<3>[ 1.070680 / 01-01 00:00:01.069][3] diag: Failed to create IPC logging context
1074<4>[ 1.076169 / 01-01 00:00:01.069][3] mts_tty_init success
1075<6>[ 1.076193 / 01-01 00:00:01.069][3] DM_APP: lge_dm_tty_init
1076<6>[ 1.076261 / 01-01 00:00:01.069][3] lge_bypass_init
1077<6>[ 1.076298 / 01-01 00:00:01.069][3] lge_bypass_init: success
1078<6>[ 1.090874 / 01-01 00:00:01.089][3] brd: module loaded
1079<6>[ 1.092089 / 01-01 00:00:01.089][3] loop: module loaded
1080<6>[ 1.092267 / 01-01 00:00:01.089][3] zram: Created 1 device(s)
1081<6>[ 1.093280 / 01-01 00:00:01.089][3] QSEECOM: qseecom_probe: qseecom.qsee_version = 0x1000000
1082<4>[ 1.093324 / 01-01 00:00:01.089][3] QSEECOM: qseecom_retrieve_ce_data: Device does not support PFE
1083<6>[ 1.093334 / 01-01 00:00:01.089][3] QSEECOM: qseecom_probe: no-clock-support=0x1<4>[ 1.093344 / 01-01 00:00:01.089][3] QSEECOM: qseecom_probe: qseecom.qsee_reentrancy_support = 2
1084<6>[ 1.097123 / 01-01 00:00:01.089][3] IrRC: uei,reset-gpio: 995
1085<4>[ 1.097549 / 01-01 00:00:01.089][3] i2c-core: driver [tabla-i2c-core] using legacy suspend method
1086<4>[ 1.097557 / 01-01 00:00:01.089][3] i2c-core: driver [tabla-i2c-core] using legacy resume method
1087<4>[ 1.097615 / 01-01 00:00:01.089][3] i2c-core: driver [wcd9xxx-i2c-core] using legacy suspend method
1088<4>[ 1.097622 / 01-01 00:00:01.089][3] i2c-core: driver [wcd9xxx-i2c-core] using legacy resume method
1089<4>[ 1.097672 / 01-01 00:00:01.089][3] i2c-core: driver [tasha-i2c-core] using legacy suspend method
1090<4>[ 1.097679 / 01-01 00:00:01.089][3] i2c-core: driver [tasha-i2c-core] using legacy resume method
1091<6>[ 1.099333 / 01-01 00:00:01.089][3] Loading PN547 driver
1092<6>[ 1.099434 / 01-01 00:00:01.089][0] pn547: Start async init
1093<6>[ 1.100890 / 01-01 00:00:01.099][0] pn547: pn547_probe() start
1094<6>[ 1.101127 / 01-01 00:00:01.099][0] pn547:IRQ : 9
1095<6>[ 1.101127 / 01-01 00:00:01.099][0] VEN : 12
1096<6>[ 1.101127 / 01-01 00:00:01.099][0] FIRM : 11
1097<6>[ 1.101288 / 01-01 00:00:01.099][0] pn547_probe : requesting IRQ 273
1098<6>[ 1.101415 / 01-01 00:00:01.099][0] pn547: pn547_probe() end
1099<6>[ 1.101494 / 01-01 00:00:01.099][0] pn547: Loading PN547 driver Success!
1100<6>[ 1.101933 / 01-01 00:00:01.099][3] qce 660000.qcedev: Qualcomm Crypto 5.3.1 device found @0x660000
1101<6>[ 1.101947 / 01-01 00:00:01.099][3] qce 660000.qcedev: CE device = 0x0
1102<6>[ 1.101947 / 01-01 00:00:01.099][3] , IO base, CE = 0xffffff8003a80000
1103<6>[ 1.101947 / 01-01 00:00:01.099][3] , Consumer (IN) PIPE 2, Producer (OUT) PIPE 3
1104<6>[ 1.101947 / 01-01 00:00:01.099][3] IO base BAM = 0x (null)
1105<6>[ 1.101947 / 01-01 00:00:01.099][3] BAM IRQ 156
1106<6>[ 1.101947 / 01-01 00:00:01.099][3] Engines Availability = 0x2011053
1107<6>[ 1.102001 / 01-01 00:00:01.099][3] sps:BAM 0x0000000000644000 is registered.
1108<6>[ 1.102177 / 01-01 00:00:01.099][3] sps:BAM 0x0000000000644000 (va:0xffffff8003b00000) enabled: ver:0x27, number of pipes:16
1109<3>[ 1.102193 / 01-01 00:00:01.099][3] sps:BAM 0x0000000000644000 pipe 3 sharing violation
1110<3>[ 1.102202 / 01-01 00:00:01.099][3] sps:Failed to connect BAM 0xffffffc033fe0800 pipe 3
1111<3>[ 1.102211 / 01-01 00:00:01.099][3] QCE50: qce_sps_init_ep_conn: sps_connect() fail pipe_handle=0xffffffc033fe0c00, rc = -1
1112<3>[ 1.102236 / 01-01 00:00:01.099][3] sps:De-init client in connected state: 0x1535053
1113<4>[ 1.102287 / 01-01 00:00:01.099][3] qce: probe of 660000.qcedev failed with error -1
1114<6>[ 1.104468 / 01-01 00:00:01.099][3] qcrypto 660000.qcrypto: Qualcomm Crypto 5.3.1 device found @0x660000
1115<6>[ 1.104488 / 01-01 00:00:01.099][3] qcrypto 660000.qcrypto: CE device = 0x0
1116<6>[ 1.104488 / 01-01 00:00:01.099][3] , IO base, CE = 0xffffff8003b40000
1117<6>[ 1.104488 / 01-01 00:00:01.099][3] , Consumer (IN) PIPE 4, Producer (OUT) PIPE 5
1118<6>[ 1.104488 / 01-01 00:00:01.099][3] IO base BAM = 0x (null)
1119<6>[ 1.104488 / 01-01 00:00:01.099][3] BAM IRQ 156
1120<6>[ 1.104488 / 01-01 00:00:01.099][3] Engines Availability = 0x2011053
1121<6>[ 1.104536 / 01-01 00:00:01.099][3] sps:BAM 0x0000000000644000 is registered.
1122<6>[ 1.104692 / 01-01 00:00:01.099][3] sps:BAM 0x0000000000644000 (va:0xffffff8003bc0000) enabled: ver:0x27, number of pipes:16
1123<6>[ 1.104927 / 01-01 00:00:01.099][3] QCE50: qce_sps_init: Qualcomm MSM CE-BAM at 0x0000000000644000 irq 156
1124<6>[ 1.110868 / 01-01 00:00:01.109][3] qcrypto 660000.qcrypto: qcrypto-ecb-aes
1125<6>[ 1.111002 / 01-01 00:00:01.109][3] qcrypto 660000.qcrypto: qcrypto-cbc-aes
1126<6>[ 1.111136 / 01-01 00:00:01.109][3] qcrypto 660000.qcrypto: qcrypto-ctr-aes
1127<6>[ 1.111219 / 01-01 00:00:01.109][3] qcrypto 660000.qcrypto: qcrypto-ecb-des
1128<6>[ 1.111296 / 01-01 00:00:01.109][3] qcrypto 660000.qcrypto: qcrypto-cbc-des
1129<6>[ 1.111381 / 01-01 00:00:01.109][3] qcrypto 660000.qcrypto: qcrypto-ecb-3des
1130<6>[ 1.111458 / 01-01 00:00:01.109][3] qcrypto 660000.qcrypto: qcrypto-cbc-3des
1131<6>[ 1.111538 / 01-01 00:00:01.109][3] qcrypto 660000.qcrypto: qcrypto-xts-aes
1132<6>[ 1.111623 / 01-01 00:00:01.109][3] qcrypto 660000.qcrypto: qcrypto-sha1
1133<6>[ 1.111705 / 01-01 00:00:01.109][3] qcrypto 660000.qcrypto: qcrypto-sha256
1134<6>[ 1.111795 / 01-01 00:00:01.109][3] qcrypto 660000.qcrypto: qcrypto-aead-hmac-sha1-cbc-aes
1135<6>[ 1.111873 / 01-01 00:00:01.109][3] qcrypto 660000.qcrypto: qcrypto-aead-hmac-sha1-cbc-des
1136<6>[ 1.111949 / 01-01 00:00:01.109][3] qcrypto 660000.qcrypto: qcrypto-aead-hmac-sha1-cbc-3des
1137<6>[ 1.112025 / 01-01 00:00:01.109][3] qcrypto 660000.qcrypto: qcrypto-aead-hmac-sha256-cbc-aes
1138<6>[ 1.112102 / 01-01 00:00:01.109][3] qcrypto 660000.qcrypto: qcrypto-aead-hmac-sha256-cbc-des
1139<6>[ 1.112179 / 01-01 00:00:01.109][3] qcrypto 660000.qcrypto: qcrypto-aead-hmac-sha256-cbc-3des
1140<6>[ 1.112257 / 01-01 00:00:01.109][3] qcrypto 660000.qcrypto: qcrypto-hmac-sha1
1141<6>[ 1.112333 / 01-01 00:00:01.109][3] qcrypto 660000.qcrypto: qcrypto-hmac-sha256
1142<6>[ 1.112415 / 01-01 00:00:01.109][3] qcrypto 660000.qcrypto: qcrypto-aes-ccm
1143<6>[ 1.112494 / 01-01 00:00:01.109][3] qcrypto 660000.qcrypto: qcrypto-rfc4309-aes-ccm
1144<6>[ 1.115195 / 01-01 00:00:01.109][3] ICE IRQ = 26
1145<3>[ 1.115338 / 01-01 00:00:01.109][3] qcom_ice_get_device_tree_data: No vdd-hba-supply regulator, assuming not needed
1146<6>[ 1.115384 / 01-01 00:00:01.109][3] ICE IRQ = 27
1147<6>[ 1.120702 / 01-01 00:00:01.119][3] qcom_ice_get_pdevice: found ice device ffffffc033fe6a00
1148<6>[ 1.120727 / 01-01 00:00:01.119][3] qcom_ice_get_pdevice: matching platform device ffffffc0f82fb400
1149<3>[ 1.121233 / 01-01 00:00:01.119][3] scm_call failed: func id 0x42000c02, arginfo: 0x2, args: 0x13, 0x0, 0x0, 0x0, ret: -2, syscall returns: 0xfffffffffffffffc, 0x0, 0x0
1150<3>[ 1.121857 / 01-01 00:00:01.119][3] ufs_qcom_phy_qmp_14nm 627000.ufsphy: failed to get tx_iface_clk err -2
1151<3>[ 1.121867 / 01-01 00:00:01.119][3] ufs_qcom_phy_qmp_14nm 627000.ufsphy: failed to get rx_iface_clk err -2
1152<6>[ 1.122821 / 01-01 00:00:01.119][3] scsi host0: ufshcd
1153<6>[ 1.126458 / 01-01 00:00:01.119][3] qcom_ice 630000.ufsice: QC ICE 2.1.44 device found @0xffffff8001ff0000
1154<6>[ 1.141881 / 01-01 00:00:01.139][3] SCSI Media Changer driver v0.25
1155<3>[ 1.145779 / 01-01 00:00:01.139][3] sps: BAM device 0x0000000007584000 is not registered yet.
1156<6>[ 1.145815 / 01-01 00:00:01.139][3] sps:BAM 0x0000000007584000 is registered.
1157<6>[ 1.147609 / 01-01 00:00:01.139][3] spi_master spi12: will run message pump with realtime priority
1158<6>[ 1.148899 / 01-01 00:00:01.139][3] sps:BAM 0x0000000007584000 (va:0xffffff8003c40000) enabled: ver:0x19, number of pipes:24
1159<6>[ 1.149770 / 01-01 00:00:01.139][3] tun: Universal TUN/TAP device driver, 1.6
1160<6>[ 1.149779 / 01-01 00:00:01.139][3] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
1161<6>[ 1.149838 / 01-01 00:00:01.139][3] PPP generic driver version 2.4.2
1162<6>[ 1.149917 / 01-01 00:00:01.139][3] PPP BSD Compression module registered
1163<6>[ 1.149927 / 01-01 00:00:01.139][3] PPP Deflate Compression module registered
1164<6>[ 1.149965 / 01-01 00:00:01.139][3] PPP MPPE Compression module registered
1165<6>[ 1.149977 / 01-01 00:00:01.139][3] NET: Registered protocol family 24
1166<3>[ 1.151603 / 01-01 00:00:01.149][3] dhd_init_wlan_mem: WIFI MEM Allocated
1167<6>[ 1.151620 / 01-01 00:00:01.149][3] bcm_wifi_init_mem successfully
1168<4>[ 1.151629 / 01-01 00:00:01.149][3] bcm_wifi_init_gpio: target does not use pinctrl for wifi reg on
1169<6>[ 1.151787 / 01-01 00:00:01.149][3] bcm_wifi_init_gpio: gpio_wlan_power=1011
1170<6>[ 1.151951 / 01-01 00:00:01.149][3] bcm_wifi_init_gpio: gpio_hostwake=73
1171<6>[ 1.170144 / 01-01 00:00:01.169][3] bcm_wifi_init_gpio successfully
1172<6>[ 1.170152 / 01-01 00:00:01.169][3] skip bcm_wifi_power up here
1173<6>[ 1.170746 / 01-01 00:00:01.169][3] usbcore: registered new interface driver catc
1174<6>[ 1.170757 / 01-01 00:00:01.169][3] pegasus: v0.9.3 (2013/04/25), Pegasus/Pegasus II USB Ethernet driver
1175<6>[ 1.170778 / 01-01 00:00:01.169][3] usbcore: registered new interface driver pegasus
1176<6>[ 1.170811 / 01-01 00:00:01.169][3] usbcore: registered new interface driver rtl8150
1177<6>[ 1.170833 / 01-01 00:00:01.169][3] usbcore: registered new interface driver r8152
1178<6>[ 1.170841 / 01-01 00:00:01.169][3] hso: ../drivers/net/usb/hso.c: Option Wireless
1179<6>[ 1.170879 / 01-01 00:00:01.169][3] usbcore: registered new interface driver hso
1180<6>[ 1.170900 / 01-01 00:00:01.169][3] usbcore: registered new interface driver asix
1181<6>[ 1.170922 / 01-01 00:00:01.169][3] usbcore: registered new interface driver ax88179_178a
1182<6>[ 1.170944 / 01-01 00:00:01.169][3] usbcore: registered new interface driver cdc_ether
1183<6>[ 1.170968 / 01-01 00:00:01.169][3] usbcore: registered new interface driver cdc_eem
1184<6>[ 1.170989 / 01-01 00:00:01.169][3] usbcore: registered new interface driver dm9601
1185<6>[ 1.171014 / 01-01 00:00:01.169][3] usbcore: registered new interface driver sr9700
1186<6>[ 1.171034 / 01-01 00:00:01.169][3] usbcore: registered new interface driver CoreChips
1187<6>[ 1.171055 / 01-01 00:00:01.169][3] usbcore: registered new interface driver smsc75xx
1188<6>[ 1.171075 / 01-01 00:00:01.169][3] usbcore: registered new interface driver smsc95xx
1189<6>[ 1.171097 / 01-01 00:00:01.169][3] usbcore: registered new interface driver gl620a
1190<6>[ 1.171118 / 01-01 00:00:01.169][3] usbcore: registered new interface driver net1080
1191<6>[ 1.171138 / 01-01 00:00:01.169][3] usbcore: registered new interface driver plusb
1192<6>[ 1.171158 / 01-01 00:00:01.169][3] usbcore: registered new interface driver rndis_host
1193<6>[ 1.171179 / 01-01 00:00:01.169][3] usbcore: registered new interface driver cdc_subset
1194<6>[ 1.171202 / 01-01 00:00:01.169][3] usbcore: registered new interface driver zaurus
1195<6>[ 1.171224 / 01-01 00:00:01.169][3] usbcore: registered new interface driver MOSCHIP usb-ethernet driver
1196<6>[ 1.171391 / 01-01 00:00:01.169][3] usbcore: registered new interface driver int51x1
1197<6>[ 1.171411 / 01-01 00:00:01.169][3] usbcore: registered new interface driver kalmia
1198<6>[ 1.171432 / 01-01 00:00:01.169][3] usbcore: registered new interface driver ipheth
1199<6>[ 1.171453 / 01-01 00:00:01.169][3] usbcore: registered new interface driver sierra_net
1200<6>[ 1.171476 / 01-01 00:00:01.169][3] usbcore: registered new interface driver cx82310_eth
1201<6>[ 1.171496 / 01-01 00:00:01.169][3] usbcore: registered new interface driver cdc_ncm
1202<6>[ 1.171518 / 01-01 00:00:01.169][3] usbcore: registered new interface driver lg-vl600
1203<6>[ 1.171538 / 01-01 00:00:01.169][3] usbcore: registered new interface driver qmi_wwan
1204<6>[ 1.171559 / 01-01 00:00:01.169][3] usbcore: registered new interface driver cdc_mbim
1205<6>[ 1.172149 / 01-01 00:00:01.169][3] msm_sharedmem: sharedmem_register_qmi: qmi init successful
1206<6>[ 1.174744 / 01-01 00:00:01.169][2] msm_sharedmem: msm_sharedmem_probe: Device created for client 'rmtfs'
1207<3>[ 1.182722 / 01-01 00:00:01.179][3] msm-dwc3 6a00000.ssusb: unable to get dbm device
1208<3>[ 1.183151 / 01-01 00:00:01.179][0] ufshcd 624000.ufshc: ufshcd_print_pwr_info:[RX, TX]: gear=[1, 1], lane[1, 1], pwr[SLOWAUTO_MODE, SLOWAUTO_MODE], rate = 0
1209<6>[ 1.186023 / 01-01 00:00:01.179][3] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
1210<6>[ 1.186041 / 01-01 00:00:01.179][3] ehci-pci: EHCI PCI platform driver
1211<6>[ 1.186134 / 01-01 00:00:01.179][3] usbcore: registered new interface driver cdc_acm
1212<6>[ 1.186142 / 01-01 00:00:01.179][3] cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters
1213<6>[ 1.186166 / 01-01 00:00:01.179][3] usbcore: registered new interface driver cdc_wdm
1214<6>[ 1.186190 / 01-01 00:00:01.179][3] usbcore: registered new interface driver uas
1215<6>[ 1.186213 / 01-01 00:00:01.179][3] usbcore: registered new interface driver usb-storage
1216<6>[ 1.186233 / 01-01 00:00:01.179][3] usbcore: registered new interface driver ums-alauda
1217<6>[ 1.186252 / 01-01 00:00:01.179][3] usbcore: registered new interface driver ums-cypress
1218<6>[ 1.186273 / 01-01 00:00:01.179][3] usbcore: registered new interface driver ums-datafab
1219<6>[ 1.186294 / 01-01 00:00:01.179][3] usbcore: registered new interface driver ums_eneub6250
1220<6>[ 1.186313 / 01-01 00:00:01.179][3] usbcore: registered new interface driver ums-freecom
1221<6>[ 1.186333 / 01-01 00:00:01.179][3] usbcore: registered new interface driver ums-isd200
1222<6>[ 1.186352 / 01-01 00:00:01.179][3] usbcore: registered new interface driver ums-jumpshot
1223<6>[ 1.186369 / 01-01 00:00:01.179][3] usbcore: registered new interface driver ums-karma
1224<6>[ 1.186388 / 01-01 00:00:01.179][3] usbcore: registered new interface driver ums-onetouch
1225<6>[ 1.186406 / 01-01 00:00:01.179][3] usbcore: registered new interface driver ums-realtek
1226<6>[ 1.186426 / 01-01 00:00:01.179][3] usbcore: registered new interface driver ums-sddr09
1227<6>[ 1.186447 / 01-01 00:00:01.179][3] usbcore: registered new interface driver ums-sddr55
1228<6>[ 1.186466 / 01-01 00:00:01.179][3] usbcore: registered new interface driver ums-usbat
1229<6>[ 1.186542 / 01-01 00:00:01.179][3] usbcore: registered new interface driver usbserial
1230<6>[ 1.186561 / 01-01 00:00:01.179][3] usbcore: registered new interface driver usbserial_generic
1231<6>[ 1.186589 / 01-01 00:00:01.179][3] usbserial: USB Serial support registered for generic
1232<6>[ 1.186610 / 01-01 00:00:01.179][3] usbcore: registered new interface driver ftdi_sio
1233<6>[ 1.186628 / 01-01 00:00:01.179][3] usbserial: USB Serial support registered for FTDI USB Serial Device
1234<6>[ 1.186651 / 01-01 00:00:01.179][3] usbcore: registered new interface driver pl2303
1235<6>[ 1.186668 / 01-01 00:00:01.179][3] usbserial: USB Serial support registered for pl2303
1236<6>[ 1.186689 / 01-01 00:00:01.179][3] usbcore: registered new interface driver usb_ehset_test
1237<3>[ 1.187425 / 01-01 00:00:01.179][3] anx7688-usbc 6-0028: usb supply not found, deferring probe
1238<6>[ 1.188251 / 01-01 00:00:01.179][3] gbridge_init: gbridge_init successs.
1239<6>[ 1.188264 / 01-01 00:00:01.179][3] u_lgeusb init
1240<6>[ 1.189563 / 01-01 00:00:01.179][3] mousedev: PS/2 mouse device common for all mice
1241<6>[ 1.189748 / 01-01 00:00:01.179][3] usbcore: registered new interface driver appletouch
1242<6>[ 1.189774 / 01-01 00:00:01.179][3] usbcore: registered new interface driver bcm5974
1243<6>[ 1.189798 / 01-01 00:00:01.179][3] usbcore: registered new interface driver synaptics_usb
1244<6>[ 1.189823 / 01-01 00:00:01.179][3] usbcore: registered new interface driver iforce
1245<6>[ 1.189852 / 01-01 00:00:01.179][3] usbcore: registered new interface driver xpad
1246<6>[ 1.189877 / 01-01 00:00:01.179][3] usbcore: registered new interface driver usb_acecad
1247<6>[ 1.189901 / 01-01 00:00:01.179][3] usbcore: registered new interface driver aiptek
1248<6>[ 1.189925 / 01-01 00:00:01.179][3] usbcore: registered new interface driver gtco
1249<6>[ 1.189948 / 01-01 00:00:01.179][3] usbcore: registered new interface driver hanwang
1250<6>[ 1.189971 / 01-01 00:00:01.179][3] usbcore: registered new interface driver kbtab
1251<6>[ 1.191458 / 01-01 00:00:01.189][3] [Touch] touch_device_init, sic4945 start
1252<6>[ 1.191510 / 01-01 00:00:01.189][3] [Touch] touch_device_init, sw49407 start
1253<6>[ 1.192119 / 01-01 00:00:01.189][3] [Touch] touch_spi_probe
1254<6>[ 1.192119 / 01-01 00:00:01.189][3] , platform ptr = (null)
1255<6>[ 1.192130 / 01-01 00:00:01.189][3] [Touch] touch_spi_probe : 25 Mhz, chip_select = 0
1256<6>[ 1.192137 / 01-01 00:00:01.189][3] [Touch] platform device register
1257<6>[ 1.192453 / 01-01 00:00:01.189][3] [Touch] start dev.of_node
1258<6>[ 1.192540 / 01-01 00:00:01.189][3] [Touch] fw_image - 0:touch/elsa/L1L57P1_1_07.img
1259<6>[ 1.192546 / 01-01 00:00:01.189][3] [Touch] fw_image - 1:touch/elsa/L1L57P1_1_07.img
1260<6>[ 1.192554 / 01-01 00:00:01.189][3] [Touch] end dev.of_node
1261<6>[ 1.192564 / 01-01 00:00:01.189][3] [Touch] touch_set_device, data:ffffffc0f54bb018
1262<6>[ 1.192571 / 01-01 00:00:01.189][3] [Touch] touch_gpio_init - pin:89, name:touch_reset
1263<6>[ 1.192587 / 01-01 00:00:01.189][3] [Touch] touch_gpio_direction_output - pin:89, value:0
1264<6>[ 1.192608 / 01-01 00:00:01.189][3] [Touch] touch_gpio_init - pin:125, name:touch_int
1265<6>[ 1.192617 / 01-01 00:00:01.189][3] [Touch] touch_gpio_direction_input - pin:125
1266<6>[ 1.192629 / 01-01 00:00:01.189][3] [Touch] touch_gpio_init - pin:-2, name:touch_make_id
1267<6>[ 1.192634 / 01-01 00:00:01.189][3] [Touch] touch_gpio_direction_input - pin:-2
1268<4>[ 1.192692 / 01-01 00:00:01.189][3] spi12.0 supply vdd not found, using dummy regulator
1269<4>[ 1.192764 / 01-01 00:00:01.189][3] spi12.0 supply vio not found, using dummy regulator
1270<6>[ 1.193117 / 01-01 00:00:01.189][3] [Touch] pinctrl set active
1271<6>[ 1.193334 / 01-01 00:00:01.189][3] [Touch] sw49407_power, off
1272<6>[ 1.193343 / 01-01 00:00:01.189][3] [Touch] touch_gpio_direction_output - pin:89, value:0
1273<6>[ 1.194390 / 01-01 00:00:01.189][3] [Touch] sw49407_power, on
1274<6>[ 1.194398 / 01-01 00:00:01.189][3] [Touch] touch_gpio_direction_output - pin:89, value:1
1275<6>[ 1.194490 / 01-01 00:00:01.189][3] [Touch] touch_init_input 1439-2719-255-1439-2719-90-10
1276<6>[ 1.194611 / 01-01 00:00:01.189][3] input: touch_dev as /devices/virtual/input/input1
1277<3>[ 1.194847 / 01-01 00:00:01.189][3] [Touch E] [sw49407_notify 1551] 3 is not supported
1278<6>[ 1.195006 / 01-01 00:00:01.189][3] [Touch] watch_fontdata_attr_init font_buffer(42 KB) malloc
1279<6>[ 1.195036 / 01-01 00:00:01.189][3] [Touch] hw_reset_delay : 90 ms
1280<6>[ 1.195060 / 01-01 00:00:01.189][3] [Touch] platform device registered ...
1281<6>[ 1.197843 / 01-01 00:00:01.189][3] fpc1020 spi8.1: found pin control fpc1020_spi_active
1282<6>[ 1.197865 / 01-01 00:00:01.189][3] fpc1020 spi8.1: found pin control fpc1020_reset_reset
1283<6>[ 1.197872 / 01-01 00:00:01.189][3] fpc1020 spi8.1: found pin control fpc1020_reset_active
1284<6>[ 1.197880 / 01-01 00:00:01.189][3] fpc1020 spi8.1: found pin control fpc1020_cs_low
1285<6>[ 1.197886 / 01-01 00:00:01.189][3] fpc1020 spi8.1: found pin control fpc1020_cs_high
1286<6>[ 1.197893 / 01-01 00:00:01.189][3] fpc1020 spi8.1: found pin control fpc1020_cs_active
1287<6>[ 1.197900 / 01-01 00:00:01.189][3] fpc1020 spi8.1: found pin control fpc1020_irq_active
1288<6>[ 1.197947 / 01-01 00:00:01.189][3] fpc1020 spi8.1: fpc1020_probe enable-wakeup
1289<6>[ 1.198221 / 01-01 00:00:01.189][3] fpc1020 spi8.1: Enabling hardware
1290<6>[ 1.201693 / 01-01 00:00:01.199][3] fpc1020 spi8.1: fpc1020_probe: ok
1291<6>[ 1.201745 / 01-01 00:00:01.199][3] fpc1020_init OK
1292<6>[ 1.202121 / 01-01 00:00:01.199][3] qcom,qpnp-rtc qpnp-rtc-8: rtc core: registered qpnp_rtc as rtc0
1293<6>[ 1.202310 / 01-01 00:00:01.199][3] i2c /dev entries driver
1294<6>[ 1.235856 / 01-01 00:00:01.229][3] vmem: Up and running with 4 banks of memory from [io size 0x3f083553c9 64bit disabled]
1295<6>[ 1.253653 / 01-01 00:00:01.249][3] msm_actuator_get_dt_data:768 msm_actuator_get_dt_data gpio count -2
1296<3>[ 1.253685 / 01-01 00:00:01.249][3] msm_camera_pinctrl_init:1378 Getting pinctrl handle failed
1297<3>[ 1.253692 / 01-01 00:00:01.249][3] msm_camera_power_up:1552 Initialization of pinctrl failed
1298<3>[ 1.253702 / 01-01 00:00:01.249][3] msm_camera_request_gpio_table:741 invalid gpio_tbl 0000000000000000 / size 0
1299<6>[ 1.263482 / 01-01 00:00:01.259][3] msm_cci_init:1399: hw_version = 0x10040000
1300<3>[ 1.263752 / 01-01 00:00:01.259][3] msm_actuator_get_vcm_version:719 msm_actuator_get_vcm_version: [CHECK] vcm_ver(64) rc(0)
1301<3>[ 1.270391 / 01-01 00:00:01.269][3] msm_camera_request_gpio_table:741 invalid gpio_tbl 0000000000000000 / size 0
1302<3>[ 1.272876 / 01-01 00:00:01.269][3] msm_eeprom_platform_probe failed 1823
1303<3>[ 1.273479 / 01-01 00:00:01.269][3] msm_eeprom_platform_probe failed 1823
1304<3>[ 1.274030 / 01-01 00:00:01.269][3] msm_eeprom_i2c_probe failed 936
1305<3>[ 1.276615 / 01-01 00:00:01.269][3] msm_ois_platform_probe:1267 msm_ois_platform_probe: No/Error OIS GPIO
1306<6>[ 1.280185 / 01-01 00:00:01.279][0] [Touch] touch_ic_init Start
1307<6>[ 1.280214 / 01-01 00:00:01.279][0] [Touch] fb_notif change
1308<6>[ 1.280227 / 01-01 00:00:01.279][0] [Touch] sw49407_init: charger_state = 0x00
1309<6>[ 1.280516 / 01-01 00:00:01.279][0] [Touch] info ptr addr read : 0026425C
1310<6>[ 1.280623 / 01-01 00:00:01.279][0] [Touch] tc status read : 0F7000C0
1311<6>[ 1.280632 / 01-01 00:00:01.279][0] [Touch] ========== Info ADDR ==========
1312<6>[ 1.280640 / 01-01 00:00:01.279][0] [Touch] chip_info_addr : 025C
1313<6>[ 1.280647 / 01-01 00:00:01.279][0] [Touch] reg_info_addr : 0264
1314<6>[ 1.280654 / 01-01 00:00:01.279][0] [Touch] ========== Info ADDR ==========
1315<6>[ 1.280661 / 01-01 00:00:01.279][0] [Touch] Model ID is loaded
1316<6>[ 1.280669 / 01-01 00:00:01.279][0] [Touch] Production Test info checksum is ok
1317<6>[ 1.281499 / 01-01 00:00:01.279][0] [Touch] ==Print PT info Data==
1318<6>[ 1.281516 / 01-01 00:00:01.279][0] [Touch] version : v1.07, chip : 9, protocol : 4
1319<6>[ 1.281516 / 01-01 00:00:01.279][0] [Touch]
1320<6>[ 1.281516 / 01-01 00:00:01.279][0] [Touch] fpc : 2, lcm : 4, lot : 9
1321<6>[ 1.281516 / 01-01 00:00:01.279][0] [Touch] product id : L1L57P1
1322<6>[ 1.281516 / 01-01 00:00:01.279][0] [Touch] flash boot : idle, done, crc : ok
1323<6>[ 1.281536 / 01-01 00:00:01.279][0] [Touch] ==Print Config Header Data==
1324<6>[ 1.281544 / 01-01 00:00:01.279][0] [Touch] Chip Rev : 0, Model_ID : 1, lcm_id : 4, fpcb_id : 2, lot_id : 3
1325<6>[ 1.282061 / 01-01 00:00:01.279][0] [Touch] resume ts->lpwg.screen on
1326<6>[ 1.282158 / 01-01 00:00:01.279][0] [Touch] sw49407_lpwg_control mode = 0
1327<6>[ 1.282252 / 01-01 00:00:01.279][0] [Touch] swipe disable
1328<6>[ 1.282261 / 01-01 00:00:01.279][0] [Touch] sw49407_tc_driving = 3, 185
1329<6>[ 1.282357 / 01-01 00:00:01.279][0] [Touch] DDI Display Mode = 3
1330<6>[ 1.282545 / 01-01 00:00:01.279][0] [Touch] Reset Cnt : 19
1331<3>[ 1.282727 / 01-01 00:00:01.279][3] msm_sensor_get_sub_module_index:309 src_node NULL
1332<3>[ 1.283611 / 01-01 00:00:01.279][3] msm_sensor_get_sub_module_index:309 src_node NULL
1333<3>[ 1.284184 / 01-01 00:00:01.279][3] msm_sensor_get_sub_module_index:309 src_node NULL
1334<6>[ 1.289825 / 01-01 00:00:01.279][3] MSM-CPP cpp_init_hardware:867 CPP HW Version: 0x60000000
1335<3>[ 1.289851 / 01-01 00:00:01.279][3] MSM-CPP cpp_init_hardware:885 stream_cnt:0
1336<3>[ 1.303451 / 01-01 00:00:01.299][3] __msm_jpeg_init:1537] Jpeg Device id 0
1337<3>[ 1.304549 / 01-01 00:00:01.299][3] __msm_jpeg_init:1537] Jpeg Device id 2__msm_jpeg_init:1537] Jpeg Device id 3
1338<3>[ 1.309736 / 01-01 00:00:01.299][3] msm_fd_hw_set_dt_parms_by_name: Error property does not exist
1339<6>[ 1.310276 / 01-01 00:00:01.309][2] [Touch] sw49407_te_info : 546, 16.66 ms, 60.00 hz
1340<6>[ 1.310348 / 01-01 00:00:01.309][2] [Touch] get fwpath from def_fwpath : rev:0
1341<6>[ 1.310356 / 01-01 00:00:01.309][2] [Touch] fwpath[touch/elsa/L1L57P1_1_07.img]
1342<6>[ 1.310367 / 01-01 00:00:01.309][2] [Touch] fw size:91648, data: ffffffc000ed3838
1343<6>[ 1.310376 / 01-01 00:00:01.309][2] [Touch] sw49407_fw_compare : binary[1.07.0] device[1.07.0] -> update: 0, force: 0
1344<6>[ 1.310387 / 01-01 00:00:01.309][2] [Touch] There is no need to reset (ret: -1)
1345<6>[ 1.310398 / 01-01 00:00:01.309][2] [Touch] touch_ic_init Start
1346<6>[ 1.310406 / 01-01 00:00:01.309][2] [Touch] sw49407_init: charger_state = 0x00
1347<6>[ 1.310508 / 01-01 00:00:01.309][2] [Touch] info ptr addr read : 0026425C
1348<6>[ 1.310598 / 01-01 00:00:01.309][2] [Touch] tc status read : 0F5000E4
1349<6>[ 1.310605 / 01-01 00:00:01.309][2] [Touch] ========== Info ADDR ==========
1350<6>[ 1.310610 / 01-01 00:00:01.309][2] [Touch] chip_info_addr : 025C
1351<6>[ 1.310616 / 01-01 00:00:01.309][2] [Touch] reg_info_addr : 0264
1352<6>[ 1.310621 / 01-01 00:00:01.309][2] [Touch] ========== Info ADDR ==========
1353<6>[ 1.310627 / 01-01 00:00:01.309][2] [Touch] Model ID is loaded
1354<6>[ 1.310632 / 01-01 00:00:01.309][2] [Touch] Production Test info checksum is ok
1355<6>[ 1.311418 / 01-01 00:00:01.309][2] [Touch] ==Print PT info Data==
1356<6>[ 1.311428 / 01-01 00:00:01.309][2] [Touch] version : v1.07, chip : 9, protocol : 4
1357<6>[ 1.311428 / 01-01 00:00:01.309][2] [Touch]
1358<6>[ 1.311428 / 01-01 00:00:01.309][2] [Touch] fpc : 2, lcm : 4, lot : 9
1359<6>[ 1.311428 / 01-01 00:00:01.309][2] [Touch] product id : L1L57P1
1360<6>[ 1.311428 / 01-01 00:00:01.309][2] [Touch] flash boot : idle, done, crc : ok
1361<6>[ 1.311442 / 01-01 00:00:01.309][2] [Touch] ==Print Config Header Data==
1362<6>[ 1.311448 / 01-01 00:00:01.309][2] [Touch] Chip Rev : 0, Model_ID : 1, lcm_id : 4, fpcb_id : 2, lot_id : 3
1363<6>[ 1.311901 / 01-01 00:00:01.309][2] [Touch] resume ts->lpwg.screen on
1364<6>[ 1.311984 / 01-01 00:00:01.309][2] [Touch] sw49407_lpwg_control mode = 0
1365<6>[ 1.312068 / 01-01 00:00:01.309][2] [Touch] swipe disable
1366<6>[ 1.312075 / 01-01 00:00:01.309][2] [Touch] sw49407_tc_driving = 3, 185
1367<6>[ 1.312160 / 01-01 00:00:01.309][2] [Touch] DDI Display Mode = 3
1368<6>[ 1.312319 / 01-01 00:00:01.309][2] [Touch] Reset Cnt : 19
1369<6>[ 1.340182 / 01-01 00:00:01.339][0] [Touch] sw49407_te_info : 547, 16.69 ms, 59.89 hz
1370<6>[ 1.340206 / 01-01 00:00:01.339][0] [Touch] touch_ic_init End
1371<6>[ 1.353536 / 01-01 00:00:01.349][2] [Touch] TC_Driving OK
1372<3>[ 1.397959 / 01-01 00:00:01.389][0] ufshcd 624000.ufshc: [LGE][UFS] update quirks, manufacturerid:65535, model:ANY_MODEL, quirk:0x80
1373<3>[ 1.400051 / 01-01 00:00:01.399][3] msm_fd aa4000.qcom,fd: Face detection halt timeout
1374<0>[ 1.400490 / 01-01 00:00:01.399][3] drv probe : 1308 msm_fd 92
1375<6>[ 1.401362 / 01-01 00:00:01.399][3] usbcore: registered new interface driver uvcvideo
1376<6>[ 1.401371 / 01-01 00:00:01.399][3] USB Video Class driver (1.1.1)
1377<6>[ 1.401379 / 01-01 00:00:01.399][3] gspca_main: v2.14.0 registered
1378<6>[ 1.401705 / 01-01 00:00:01.399][3] SMB1351 smb1351_parallel_slave_probe: smb1351 parallel successfully probed.
1379<3>[ 1.401830 / 01-01 00:00:01.399][0] ufshcd 624000.ufshc: ufshcd_print_pwr_info:[RX, TX]: gear=[3, 3], lane[1, 1], pwr[FAST MODE, FAST MODE], rate = 2
1380<6>[ 1.401840 / 01-01 00:00:01.399][3] SMBCHG: smbchg_probe: USB supply not found, deferring probe
1381<3>[ 1.401933 / 01-01 00:00:01.399][3] ufshcd_get_max_icc_level: Couldn't find valid icc_level = 0
1382<6>[ 1.402291 / 01-01 00:00:01.399][3] FG: fg_of_init: Using external sense
1383<6>[ 1.402305 / 01-01 00:00:01.399][3] FG: fg_of_init: batt_profile_enabled : 1
1384<6>[ 1.402312 / 01-01 00:00:01.399][3] FG: fg_of_init: lge_rid_disable : 0
1385<6>[ 1.402327 / 01-01 00:00:01.399][3] FG: fg_of_init: rconn_mohm : 30
1386<5>[ 1.402901 / 01-01 00:00:01.399][0] scsi 0:0:0:49488: Well-known LUN SKhynix H28U74301AMR E005 PQ: 0 ANSI: 6
1387<3>[ 1.403058 / 01-01 00:00:01.399][3] FG: cc_soc_store_work: nom_cap_uah zero!
1388<6>[ 1.404217 / 01-01 00:00:01.399][0] FG: fg_batt_missing_irq_handler: batt-missing triggered: present
1389<6>[ 1.404267 / 01-01 00:00:01.399][2] FG: fg_probe: rbias software control : 0
1390<6>[ 1.404276 / 01-01 00:00:01.399][2] FG: fg_probe: FG Probe success - FG Revision DIG:3.1 ANA:1.2 PMIC subtype=19
1391<6>[ 1.406890 / 01-01 00:00:01.399][2] panic-handler: free[@0xc0100000+@0xc00000)
1392<5>[ 1.410767 / 01-01 00:00:01.409][3] scsi 0:0:0:49456: Well-known LUN SKhynix H28U74301AMR E005 PQ: 0 ANSI: 6
1393<3>[ 1.411892 / 01-01 00:00:01.409][2] FG: fg_set_resume_soc: recharge_M resume soc lowered to 0xf7
1394<5>[ 1.411906 / 01-01 00:00:01.409][3] scsi 0:0:0:49476: Well-known LUN SKhynix H28U74301AMR E005 PQ: 0 ANSI: 6
1395<5>[ 1.413258 / 01-01 00:00:01.409][1] scsi 0:0:0:0: Direct-Access SKhynix H28U74301AMR E005 PQ: 0 ANSI: 6
1396<5>[ 1.414773 / 01-01 00:00:01.409][0] scsi 0:0:0:1: Direct-Access SKhynix H28U74301AMR E005 PQ: 0 ANSI: 6
1397<5>[ 1.416612 / 01-01 00:00:01.409][0] scsi 0:0:0:2: Direct-Access SKhynix H28U74301AMR E005 PQ: 0 ANSI: 6
1398<5>[ 1.418499 / 01-01 00:00:01.409][0] scsi 0:0:0:3: Direct-Access SKhynix H28U74301AMR E005 PQ: 0 ANSI: 6
1399<5>[ 1.420379 / 01-01 00:00:01.419][0] scsi 0:0:0:4: Direct-Access SKhynix H28U74301AMR E005 PQ: 0 ANSI: 6
1400<5>[ 1.421146 / 01-01 00:00:01.419][1] scsi 0:0:0:5: Direct-Access SKhynix H28U74301AMR E005 PQ: 0 ANSI: 6
1401<5>[ 1.421819 / 01-01 00:00:01.419][1] scsi 0:0:0:6: Direct-Access SKhynix H28U74301AMR E005 PQ: 0 ANSI: 6
1402<6>[ 1.447455 / 01-01 00:00:01.439][3] device-mapper: uevent: version 1.0.3
1403<6>[ 1.447614 / 01-01 00:00:01.439][3] device-mapper: ioctl: 4.28.0-ioctl (2014-09-17) initialised: dm-devel@redhat.com
1404<6>[ 1.447706 / 01-01 00:00:01.439][3] device-mapper: req-crypt: dm-req-crypt successfully initalized.
1405<6>[ 1.447706 / 01-01 00:00:01.439][3]
1406<6>[ 1.447890 / 01-01 00:00:01.439][3] sdhci: Secure Digital Host Controller Interface driver
1407<6>[ 1.447897 / 01-01 00:00:01.439][3] sdhci: Copyright(c) Pierre Ossman
1408<6>[ 1.447906 / 01-01 00:00:01.439][3] sdhci-pltfm: SDHCI platform and OF driver helper
1409<6>[ 1.449139 / 01-01 00:00:01.439][3] qcom_ice_get_pdevice: found ice device ffffffc033fe6e00
1410<6>[ 1.449150 / 01-01 00:00:01.439][3] qcom_ice_get_pdevice: matching platform device ffffffc0f82fb800
1411<4>[ 1.449543 / 01-01 00:00:01.439][3] sdhci_msm 74a4900.sdhci: sdhci_msm_probe: ICE device is not enabled
1412<6>[ 1.464610 / 01-01 00:00:01.459][0] sdhci_msm 74a4900.sdhci: No vmmc regulator found
1413<6>[ 1.464642 / 01-01 00:00:01.459][0] sdhci_msm 74a4900.sdhci: No vqmmc regulator found
1414<6>[ 1.465006 / 01-01 00:00:01.459][0] mmc0: SDHCI controller on 74a4900.sdhci [74a4900.sdhci] using 64-bit ADMA in legacy mode
1415<0>[ 1.510721 / 01-01 00:00:01.509][0] drv probe : 1449 sdhci_msm 61
1416<6>[ 1.521030 / 01-01 00:00:01.519][2] hidraw: raw HID events driver (C) Jiri Kosina
1417<6>[ 1.522103 / 01-01 00:00:01.519][2] usbcore: registered new interface driver usbhid
1418<6>[ 1.522111 / 01-01 00:00:01.519][2] usbhid: USB HID core driver
1419<6>[ 1.522511 / 01-01 00:00:01.519][3] ashmem: initialized
1420<6>[ 1.522613 / 01-01 00:00:01.519][3] logger: created 256K log 'log_main'
1421<6>[ 1.522685 / 01-01 00:00:01.519][3] logger: created 256K log 'log_events'
1422<6>[ 1.522764 / 01-01 00:00:01.519][3] logger: created 256K log 'log_radio'
1423<6>[ 1.522830 / 01-01 00:00:01.519][3] logger: created 256K log 'log_system'
1424<6>[ 1.523784 / 01-01 00:00:01.519][3] qpnp_coincell_charger_show_state: enabled=Y, voltage=3200 mV, resistance=2100 ohm
1425<6>[ 1.530328 / 01-01 00:00:01.529][3] bimc-bwmon 408000.qcom,cpu-bwmon: BW HWmon governor registered.
1426<6>[ 1.531689 / 01-01 00:00:01.529][3] arm-memlat-mon soc:qcom,arm-memlat-mon-0: Memory Latency governor registered.
1427<6>[ 1.531736 / 01-01 00:00:01.529][3] arm-memlat-mon soc:qcom,arm-memlat-mon-2: Memory Latency governor registered.
1428<6>[ 1.534265 / 01-01 00:00:01.529][3] m4m-hwmon 6530000.qcom,m4m-hwmon: Cache HWmon governor registered.
1429<3>[ 1.538226 / 01-01 00:00:01.529][3] devfreq soc:qcom,cpubw: Couldn't update frequency transition information.
1430<3>[ 1.538346 / 01-01 00:00:01.529][3] devfreq soc:qcom,mincpubw: Couldn't update frequency transition information.
1431<3>[ 1.538460 / 01-01 00:00:01.529][3] devfreq soc:qcom,memlat-cpu0: Couldn't update frequency transition information.
1432<3>[ 1.538566 / 01-01 00:00:01.529][3] devfreq soc:qcom,memlat-cpu2: Couldn't update frequency transition information.
1433<3>[ 1.539556 / 01-01 00:00:01.529][3] devfreq soc:qcom,m4m: Couldn't update frequency transition information.
1434<6>[ 1.542024 / 01-01 00:00:01.539][3] Trustonic TEE: mobicore_init: MobiCore mcDrvModuleApi version is 3.0
1435<6>[ 1.542288 / 01-01 00:00:01.539][3] Trustonic TEE: mobicore_probe: MobiCore t-base-QC-MSM8996-Android-310C-V005-20160617_153829_12623
1436<6>[ 1.542840 / 01-01 00:00:01.539][3] usbcore: registered new interface driver snd-usb-audio
1437<6>[ 1.542866 / 01-01 00:00:01.539][3] usbcore: registered new interface driver snd-ua101
1438<6>[ 1.542889 / 01-01 00:00:01.539][3] usbcore: registered new interface driver snd-usb-caiaq
1439<6>[ 1.542911 / 01-01 00:00:01.539][3] usbcore: registered new interface driver snd-usb-6fire
1440<3>[ 1.544999 / 01-01 00:00:01.539][3] msm8996-pinctrl 1010000.pinctrl: invalid group "gpio143" for function "spkr_i2s"
1441<3>[ 1.545020 / 01-01 00:00:01.539][3] msm8996-pinctrl 1010000.pinctrl: invalid group "gpio143" for function "spkr_i2s"
1442<3>[ 1.545161 / 01-01 00:00:01.539][3] msm8996-pinctrl 1010000.pinctrl: invalid group "gpio143" for function "spkr_i2s"
1443<3>[ 1.545176 / 01-01 00:00:01.539][3] msm8996-pinctrl 1010000.pinctrl: invalid group "gpio143" for function "spkr_i2s"
1444<6>[ 1.546351 / 01-01 00:00:01.539][3] es9218_init()
1445<6>[ 1.546390 / 01-01 00:00:01.539][3] es9218_probe
1446<6>[ 1.546402 / 01-01 00:00:01.539][3] es9218_hw_rev_check() lg board2 rev_(12)
1447<6>[ 1.546461 / 01-01 00:00:01.539][3] es9218_populate_get_pdata: reset gpio 989
1448<6>[ 1.546476 / 01-01 00:00:01.539][3] es9218_populate_get_pdata: hph switch 1013<6>[ 1.546491 / 01-01 00:00:01.539][3] es9218_populate_get_pdata: power gpio 1014
1449<6>[ 1.546609 / 01-01 00:00:01.539][3] es9218_probe() g_ess_rev:2
1450<4>[ 1.546624 / 01-01 00:00:01.539][3] snd_soc_register_codec ret = 0
1451<6>[ 1.556519 / 01-01 00:00:01.549][3] msm-dai-tdm soc:qcom,msm-dai-tdm-tert-rx: msm_dai_tdm_q6_probe: dev_name: soc:qcom,msm-dai-tdm-tert-rx group_id: 0x9120
1452<6>[ 1.556777 / 01-01 00:00:01.549][3] msm-dai-q6-tdm soc:qcom,msm-dai-tdm-tert-rx:qcom,msm-dai-q6-tdm-tert-rx-0: msm_dai_q6_tdm_dev_probe: dev_name: soc:qcom,msm-dai-tdm-tert-rx:qcom,msm-dai-q6-tdm-tert-rx-0 dev_id: 0x9020
1453<6>[ 1.556789 / 01-01 00:00:01.549][3] msm-dai-q6-tdm soc:qcom,msm-dai-tdm-tert-rx:qcom,msm-dai-q6-tdm-tert-rx-0: msm_dai_q6_tdm_dev_probe: Custom tdm header not supported
1454<6>[ 1.556942 / 01-01 00:00:01.549][3] msm-dai-q6-tdm soc:qcom,msm-dai-tdm-tert-rx:qcom,msm-dai-q6-tdm-tert-rx-1: msm_dai_q6_tdm_dev_probe: dev_name: soc:qcom,msm-dai-tdm-tert-rx:qcom,msm-dai-q6-tdm-tert-rx-1 dev_id: 0x9022
1455<6>[ 1.556953 / 01-01 00:00:01.549][3] msm-dai-q6-tdm soc:qcom,msm-dai-tdm-tert-rx:qcom,msm-dai-q6-tdm-tert-rx-1: msm_dai_q6_tdm_dev_probe: Custom tdm header not supported
1456<6>[ 1.557103 / 01-01 00:00:01.549][3] msm-dai-q6-tdm soc:qcom,msm-dai-tdm-tert-rx:qcom,msm-dai-q6-tdm-tert-rx-2: msm_dai_q6_tdm_dev_probe: dev_name: soc:qcom,msm-dai-tdm-tert-rx:qcom,msm-dai-q6-tdm-tert-rx-2 dev_id: 0x9024
1457<6>[ 1.557113 / 01-01 00:00:01.549][3] msm-dai-q6-tdm soc:qcom,msm-dai-tdm-tert-rx:qcom,msm-dai-q6-tdm-tert-rx-2: msm_dai_q6_tdm_dev_probe: Custom tdm header not supported
1458<6>[ 1.557259 / 01-01 00:00:01.549][3] msm-dai-q6-tdm soc:qcom,msm-dai-tdm-tert-rx:qcom,msm-dai-q6-tdm-tert-rx-3: msm_dai_q6_tdm_dev_probe: dev_name: soc:qcom,msm-dai-tdm-tert-rx:qcom,msm-dai-q6-tdm-tert-rx-3 dev_id: 0x9026
1459<6>[ 1.557269 / 01-01 00:00:01.549][3] msm-dai-q6-tdm soc:qcom,msm-dai-tdm-tert-rx:qcom,msm-dai-q6-tdm-tert-rx-3: msm_dai_q6_tdm_dev_probe: Custom tdm header not supported
1460<6>[ 1.557292 / 01-01 00:00:01.549][3] msm-dai-tdm soc:qcom,msm-dai-tdm-tert-tx: msm_dai_tdm_q6_probe: dev_name: soc:qcom,msm-dai-tdm-tert-tx group_id: 0x9121
1461<6>[ 1.557433 / 01-01 00:00:01.549][3] msm-dai-q6-tdm soc:qcom,msm-dai-tdm-tert-tx:qcom,msm-dai-q6-tdm-tert-tx-0: msm_dai_q6_tdm_dev_probe: dev_name: soc:qcom,msm-dai-tdm-tert-tx:qcom,msm-dai-q6-tdm-tert-tx-0 dev_id: 0x9021
1462<6>[ 1.557443 / 01-01 00:00:01.549][3] msm-dai-q6-tdm soc:qcom,msm-dai-tdm-tert-tx:qcom,msm-dai-q6-tdm-tert-tx-0: msm_dai_q6_tdm_dev_probe: Custom tdm header not supported
1463<6>[ 1.557589 / 01-01 00:00:01.549][3] msm-dai-q6-tdm soc:qcom,msm-dai-tdm-tert-tx:qcom,msm-dai-q6-tdm-tert-tx-1: msm_dai_q6_tdm_dev_probe: dev_name: soc:qcom,msm-dai-tdm-tert-tx:qcom,msm-dai-q6-tdm-tert-tx-1 dev_id: 0x9023
1464<6>[ 1.557600 / 01-01 00:00:01.549][3] msm-dai-q6-tdm soc:qcom,msm-dai-tdm-tert-tx:qcom,msm-dai-q6-tdm-tert-tx-1: msm_dai_q6_tdm_dev_probe: Custom tdm header not supported
1465<6>[ 1.557746 / 01-01 00:00:01.549][3] msm-dai-q6-tdm soc:qcom,msm-dai-tdm-tert-tx:qcom,msm-dai-q6-tdm-tert-tx-2: msm_dai_q6_tdm_dev_probe: dev_name: soc:qcom,msm-dai-tdm-tert-tx:qcom,msm-dai-q6-tdm-tert-tx-2 dev_id: 0x9025
1466<6>[ 1.557757 / 01-01 00:00:01.549][3] msm-dai-q6-tdm soc:qcom,msm-dai-tdm-tert-tx:qcom,msm-dai-q6-tdm-tert-tx-2: msm_dai_q6_tdm_dev_probe: Custom tdm header not supported
1467<6>[ 1.557902 / 01-01 00:00:01.549][3] msm-dai-q6-tdm soc:qcom,msm-dai-tdm-tert-tx:qcom,msm-dai-q6-tdm-tert-tx-3: msm_dai_q6_tdm_dev_probe: dev_name: soc:qcom,msm-dai-tdm-tert-tx:qcom,msm-dai-q6-tdm-tert-tx-3 dev_id: 0x9027
1468<6>[ 1.557912 / 01-01 00:00:01.549][3] msm-dai-q6-tdm soc:qcom,msm-dai-tdm-tert-tx:qcom,msm-dai-q6-tdm-tert-tx-3: msm_dai_q6_tdm_dev_probe: Custom tdm header not supported
1469<6>[ 1.557935 / 01-01 00:00:01.549][3] msm-dai-tdm soc:qcom,msm-dai-tdm-quat-rx: msm_dai_tdm_q6_probe: dev_name: soc:qcom,msm-dai-tdm-quat-rx group_id: 0x9130
1470<6>[ 1.558081 / 01-01 00:00:01.549][3] msm-dai-q6-tdm soc:qcom,msm-dai-tdm-quat-rx:qcom,msm-dai-q6-tdm-quat-rx-0: msm_dai_q6_tdm_dev_probe: dev_name: soc:qcom,msm-dai-tdm-quat-rx:qcom,msm-dai-q6-tdm-quat-rx-0 dev_id: 0x9030
1471<6>[ 1.558091 / 01-01 00:00:01.549][3] msm-dai-q6-tdm soc:qcom,msm-dai-tdm-quat-rx:qcom,msm-dai-q6-tdm-quat-rx-0: msm_dai_q6_tdm_dev_probe: Custom tdm header not supported
1472<6>[ 1.558235 / 01-01 00:00:01.549][3] msm-dai-q6-tdm soc:qcom,msm-dai-tdm-quat-rx:qcom,msm-dai-q6-tdm-quat-rx-1: msm_dai_q6_tdm_dev_probe: dev_name: soc:qcom,msm-dai-tdm-quat-rx:qcom,msm-dai-q6-tdm-quat-rx-1 dev_id: 0x9032
1473<6>[ 1.558245 / 01-01 00:00:01.549][3] msm-dai-q6-tdm soc:qcom,msm-dai-tdm-quat-rx:qcom,msm-dai-q6-tdm-quat-rx-1: msm_dai_q6_tdm_dev_probe: Custom tdm header not supported
1474<6>[ 1.558388 / 01-01 00:00:01.549][3] msm-dai-q6-tdm soc:qcom,msm-dai-tdm-quat-rx:qcom,msm-dai-q6-tdm-quat-rx-2: msm_dai_q6_tdm_dev_probe: dev_name: soc:qcom,msm-dai-tdm-quat-rx:qcom,msm-dai-q6-tdm-quat-rx-2 dev_id: 0x9034
1475<6>[ 1.558398 / 01-01 00:00:01.549][3] msm-dai-q6-tdm soc:qcom,msm-dai-tdm-quat-rx:qcom,msm-dai-q6-tdm-quat-rx-2: msm_dai_q6_tdm_dev_probe: Custom tdm header not supported
1476<6>[ 1.558541 / 01-01 00:00:01.549][3] msm-dai-q6-tdm soc:qcom,msm-dai-tdm-quat-rx:qcom,msm-dai-q6-tdm-quat-rx-3: msm_dai_q6_tdm_dev_probe: dev_name: soc:qcom,msm-dai-tdm-quat-rx:qcom,msm-dai-q6-tdm-quat-rx-3 dev_id: 0x9036
1477<6>[ 1.558551 / 01-01 00:00:01.549][3] msm-dai-q6-tdm soc:qcom,msm-dai-tdm-quat-rx:qcom,msm-dai-q6-tdm-quat-rx-3: msm_dai_q6_tdm_dev_probe: Custom tdm header not supported
1478<6>[ 1.558575 / 01-01 00:00:01.549][3] msm-dai-tdm soc:qcom,msm-dai-tdm-quat-tx: msm_dai_tdm_q6_probe: dev_name: soc:qcom,msm-dai-tdm-quat-tx group_id: 0x9131
1479<6>[ 1.558716 / 01-01 00:00:01.549][3] msm-dai-q6-tdm soc:qcom,msm-dai-tdm-quat-tx:qcom,msm-dai-q6-tdm-quat-tx-0: msm_dai_q6_tdm_dev_probe: dev_name: soc:qcom,msm-dai-tdm-quat-tx:qcom,msm-dai-q6-tdm-quat-tx-0 dev_id: 0x9031
1480<6>[ 1.558726 / 01-01 00:00:01.549][3] msm-dai-q6-tdm soc:qcom,msm-dai-tdm-quat-tx:qcom,msm-dai-q6-tdm-quat-tx-0: msm_dai_q6_tdm_dev_probe: Custom tdm header not supported
1481<6>[ 1.558872 / 01-01 00:00:01.549][3] msm-dai-q6-tdm soc:qcom,msm-dai-tdm-quat-tx:qcom,msm-dai-q6-tdm-quat-tx-1: msm_dai_q6_tdm_dev_probe: dev_name: soc:qcom,msm-dai-tdm-quat-tx:qcom,msm-dai-q6-tdm-quat-tx-1 dev_id: 0x9033
1482<6>[ 1.558882 / 01-01 00:00:01.549][3] msm-dai-q6-tdm soc:qcom,msm-dai-tdm-quat-tx:qcom,msm-dai-q6-tdm-quat-tx-1: msm_dai_q6_tdm_dev_probe: Custom tdm header not supported
1483<6>[ 1.559026 / 01-01 00:00:01.549][3] msm-dai-q6-tdm soc:qcom,msm-dai-tdm-quat-tx:qcom,msm-dai-q6-tdm-quat-tx-2: msm_dai_q6_tdm_dev_probe: dev_name: soc:qcom,msm-dai-tdm-quat-tx:qcom,msm-dai-q6-tdm-quat-tx-2 dev_id: 0x9035
1484<6>[ 1.559035 / 01-01 00:00:01.549][3] msm-dai-q6-tdm soc:qcom,msm-dai-tdm-quat-tx:qcom,msm-dai-q6-tdm-quat-tx-2: msm_dai_q6_tdm_dev_probe: Custom tdm header not supported
1485<6>[ 1.559184 / 01-01 00:00:01.549][3] msm-dai-q6-tdm soc:qcom,msm-dai-tdm-quat-tx:qcom,msm-dai-q6-tdm-quat-tx-3: msm_dai_q6_tdm_dev_probe: dev_name: soc:qcom,msm-dai-tdm-quat-tx:qcom,msm-dai-q6-tdm-quat-tx-3 dev_id: 0x9037
1486<6>[ 1.559194 / 01-01 00:00:01.549][3] msm-dai-q6-tdm soc:qcom,msm-dai-tdm-quat-tx:qcom,msm-dai-q6-tdm-quat-tx-3: msm_dai_q6_tdm_dev_probe: Custom tdm header not supported
1487<6>[ 1.561933 / 01-01 00:00:01.559][3] msm-compr-dsp soc:qcom,msm-compr-dsp: msm_compr_probe: dev name soc:qcom,msm-compr-dsp
1488<6>[ 1.574107 / 01-01 00:00:01.569][3] GACT probability on
1489<6>[ 1.574126 / 01-01 00:00:01.569][3] Mirror/redirect action on
1490<6>[ 1.574142 / 01-01 00:00:01.569][3] Simple TC action Loaded
1491<6>[ 1.574368 / 01-01 00:00:01.569][3] netem: version 1.3
1492<6>[ 1.574383 / 01-01 00:00:01.569][3] u32 classifier
1493<6>[ 1.574388 / 01-01 00:00:01.569][3] Performance counters on
1494<6>[ 1.574392 / 01-01 00:00:01.569][3] input device check on
1495<6>[ 1.574397 / 01-01 00:00:01.569][3] Actions configured
1496<6>[ 1.574419 / 01-01 00:00:01.569][3] Netfilter messages via NETLINK v0.30.
1497<6>[ 1.574447 / 01-01 00:00:01.569][3] nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
1498<6>[ 1.574640 / 01-01 00:00:01.569][3] ctnetlink v0.93: registering with nfnetlink.
1499<6>[ 1.574944 / 01-01 00:00:01.569][3] xt_time: kernel timezone is -0000
1500<6>[ 1.574963 / 01-01 00:00:01.569][3] 939-23012-001-quicksec-vpnclient-for-android-3.4-3478-b05f514d009c-3478
1501<6>[ 1.574968 / 01-01 00:00:01.569][3] vpnclient kernel spd loaded.
1502<6>[ 1.575115 / 01-01 00:00:01.569][3] ip_tables: (C) 2000-2006 Netfilter Core Team
1503<6>[ 1.575192 / 01-01 00:00:01.569][3] arp_tables: (C) 2002 David S. Miller
1504<6>[ 1.575220 / 01-01 00:00:01.569][3] TCP: bic registered
1505<6>[ 1.575228 / 01-01 00:00:01.569][3] TCP: cubic registered
1506<6>[ 1.575234 / 01-01 00:00:01.569][3] Initializing XFRM netlink socket
1507<6>[ 1.575404 / 01-01 00:00:01.569][3] NET: Registered protocol family 10
1508<7>[ 1.575804 / 01-01 00:00:01.569][3] now = 4294937453, schedule = 4294949491, rounded schedule = 4294949591 => 4294949491
1509<6>[ 1.575875 / 01-01 00:00:01.569][3] mip6: Mobile IPv6
1510<6>[ 1.575893 / 01-01 00:00:01.569][3] ip6_tables: (C) 2000-2006 Netfilter Core Team
1511<6>[ 1.575971 / 01-01 00:00:01.569][3] sit: IPv6 over IPv4 tunneling driver
1512<6>[ 1.576185 / 01-01 00:00:01.569][3] NET: Registered protocol family 17
1513<6>[ 1.576202 / 01-01 00:00:01.569][3] NET: Registered protocol family 15
1514<6>[ 1.576230 / 01-01 00:00:01.569][3] bridge: automatic filtering via arp/ip/ip6tables has been deprecated. Update your scripts to load br_netfilter if you need this.
1515<6>[ 1.576239 / 01-01 00:00:01.569][3] Ebtables v2.0 registered
1516<6>[ 1.576333 / 01-01 00:00:01.569][3] l2tp_core: L2TP core driver, V2.0
1517<6>[ 1.576345 / 01-01 00:00:01.569][3] l2tp_ppp: PPPoL2TP kernel driver, V2.0
1518<6>[ 1.576352 / 01-01 00:00:01.569][3] l2tp_ip: L2TP IP encapsulation support (L2TPv3)
1519<6>[ 1.576368 / 01-01 00:00:01.569][3] l2tp_netlink: L2TP netlink interface
1520<6>[ 1.576385 / 01-01 00:00:01.569][3] l2tp_eth: L2TP ethernet pseudowire support (L2TPv3)
1521<6>[ 1.576409 / 01-01 00:00:01.569][3] l2tp_debugfs: L2TP debugfs support
1522<6>[ 1.576416 / 01-01 00:00:01.569][3] l2tp_ip6: L2TP IP encapsulation support for IPv6 (L2TPv3)
1523<6>[ 1.577282 / 01-01 00:00:01.569][3] NET: Registered protocol family 27
1524<6>[ 1.579348 / 01-01 00:00:01.569][0] usb_otg_vreg: no parameters
1525<3>[ 1.579408 / 01-01 00:00:01.569][0] reg-fixed-voltage soc:usb-otg-switch: Failed to find supply vin
1526<3>[ 1.579472 / 01-01 00:00:01.569][0] reg-fixed-voltage soc:usb-otg-switch: Failed to register regulator: -517
1527<6>[ 1.582305 / 01-01 00:00:01.579][0] subsys-pil-tz 9300000.qcom,lpass: for adsp segments only will be dumped.
1528<6>[ 1.583342 / 01-01 00:00:01.579][0] subsys-pil-tz 1c00000.qcom,ssc: for slpi segments only will be dumped.
1529<4>[ 1.584516 / 01-01 00:00:01.579][0] pil-q6v5-mss 2080000.qcom,mss: Failed to find the pas_id.
1530<6>[ 1.585153 / 01-01 00:00:01.579][0] pil-q6v5-mss 2080000.qcom,mss: for modem segments only will be dumped.
1531<3>[ 1.585371 / 01-01 00:00:01.579][0] [LGE-ADC] lge_adc_qct_probe : lge_battery_probe starts!!!
1532<3>[ 1.585471 / 01-01 00:00:01.579][0] [LGE-ADC] lge_adc_qct_probe : XO_THERM_CH : 114, PA0_THERM_CH : 117, PA1_THERM_CH : 119
1533<3>[ 1.585480 / 01-01 00:00:01.579][0] [LGE-ADC] lge_adc_qct_probe : BD1_THERM_CH : 255, BD2_THERM_CH : 116
1534<3>[ 1.585487 / 01-01 00:00:01.579][0] [LGE-ADC] lge_adc_qct_probe : BATT_THERM_CH : -22, USB_ID_CH : 57
1535<6>[ 1.585596 / 01-01 00:00:01.579][0] [LGE-ADC] lge_adc_qct_probe : lge_battery_probe done!!!
1536<6>[ 1.585614 / 01-01 00:00:01.579][0] lge_power_changed_work
1537<6>[ 1.585764 / 01-01 00:00:01.579][0] [LGE-CD] cable_detect_probe : lge_cable_detect probe start!
1538<6>[ 1.585910 / 01-01 00:00:01.579][0] lge_power_changed_work
1539<6>[ 1.585929 / 01-01 00:00:01.579][0] [LGE-CC] lgcc_vote_fcc_update : lgcc_vote: vote id[0], set cur[3100]
1540<6>[ 1.585954 / 01-01 00:00:01.579][0] [LGE-CC] lge_check_typec_work : Check c-type cable
1541<3>[ 1.585964 / 01-01 00:00:01.579][0] [LGE-CC] lge_hvdcp_set_ibat_work : Check HVDCP
1542<6>[ 1.585971 / 01-01 00:00:01.579][0] lge_power_changed_work
1543<6>[ 1.587305 / 01-01 00:00:01.579][0] [LGE-CD] cable_detect_read_cable_info : adc = 1792000
1544<6>[ 1.587313 / 01-01 00:00:01.579][0] [LGE-CD] cable_detect_read_cable_info : cable info --> 14
1545<6>[ 1.587320 / 01-01 00:00:01.579][0] [LGE-CD] cable_detect_probe : cable_detect probe end!
1546<6>[ 1.588453 / 01-01 00:00:01.579][0] dwc3_msm_power_get_property_usb: POWER_SUPPLY_PROP_VOLTAGE_NOW
1547<6>[ 1.603924 / 01-01 00:00:01.599][2] dwc3_msm_power_get_property_usb: POWER_SUPPLY_PROP_VOLTAGE_NOW
1548<6>[ 1.605067 / 01-01 00:00:01.599][3] sps:BAM 0x0000000006b04000 is registered.
1549<3>[ 1.606580 / 01-01 00:00:01.599][3] anx7688-usbc 6-0028: battery supply not found, deferring probe
1550<3>[ 1.606583 / 01-01 00:00:01.599][2] [LGE-CD] lge_cable_detect_external_power_changed : ibat 500000, iusb 500000
1551<6>[ 1.606615 / 01-01 00:00:01.599][2] dwc3_msm_power_get_property_usb: POWER_SUPPLY_PROP_VOLTAGE_NOW
1552<3>[ 1.606656 / 01-01 00:00:01.599][3] SMBCHG: smbchg_probe: Success get LG power class property
1553<6>[ 1.606796 / 01-01 00:00:01.599][2] lge_power_changed_work
1554<3>[ 1.606807 / 01-01 00:00:01.599][3] qpnp-smbcharger qpnp-smbcharger-16: node /soc/qcom,spmi@400f000/qcom,pmi8994@2/qcom,qpnp-smbcharger IO resource absent!
1555<6>[ 1.606826 / 01-01 00:00:01.599][2] [LGE-CC] lge_check_typec_work : Check c-type cable
1556<6>[ 1.606833 / 01-01 00:00:01.599][3] SMBCHG: smbchg_check_chg_version: pmic=PMI8996, wa_flags=0xf0, hvdcp_supported=true
1557<3>[ 1.606837 / 01-01 00:00:01.599][2] [LGE-CC] lge_hvdcp_set_ibat_work : Check HVDCP
1558<6>[ 1.606857 / 01-01 00:00:01.599][3] SMBCHG: smb_parse_dt: parallel usb thr: 1400, 9v thr: 900
1559<6>[ 1.606954 / 01-01 00:00:01.599][3] smbcharger_charger_otg: no parameters
1560<6>[ 1.607056 / 01-01 00:00:01.599][3] smbcharger_external_otg: no parameters
1561<6>[ 1.607080 / 01-01 00:00:01.599][3] smbcharger_external_otg: supplied by pmi8994_boost_5v
1562<6>[ 1.607152 / 01-01 00:00:01.599][3] SMBCHG: smbchg_hw_init: Charger Revision DIG: 2.0; ANA: 2.1
1563<6>[ 1.607204 / 01-01 00:00:01.599][3] SMBCHG: smbchg_set_aicl_rerun_period_s: aicl rerun period set to 45s
1564<3>[ 1.607565 / 01-01 00:00:01.599][3] vote: name[SMBCHG: battchg_suspend], client_id[1], state[0], val[0]
1565<7>[ 1.607570 / 01-01 00:00:01.599][3] SMBCHG: battchg_suspend: 1 voting for 0 - off
1566<6>[ 1.607623 / 01-01 00:00:01.599][3] SMBCHG: smbchg_hw_init: set vfloat to 4400
1567<6>[ 1.607674 / 01-01 00:00:01.599][3] SMBCHG: smbchg_iterm_set: set tcc (100) to 0x02
1568<6>[ 1.607857 / 01-01 00:00:01.599][3] SMBCHG: smbchg_stay_awake: staying awake: 0x02 (bit 2)
1569<6>[ 1.607863 / 01-01 00:00:01.599][3] SMBCHG: smbchg_vfloat_adjust_check: Starting vfloat adjustments
1570<6>[ 1.607906 / 01-01 00:00:01.599][3] SMBCHG: smbchg_relax: relaxing: 0x00 (bit 2)
1571<3>[ 1.608014 / 01-01 00:00:01.599][2] vote: name[SMBCHG: usb_suspend], client_id[0], state[0], val[0]
1572<7>[ 1.608021 / 01-01 00:00:01.599][2] SMBCHG: usb_suspend: 0 voting for 0 - off
1573<3>[ 1.608025 / 01-01 00:00:01.599][2] vote: name[SMBCHG: dc_suspend], client_id[0], state[0], val[0]
1574<7>[ 1.608031 / 01-01 00:00:01.599][2] SMBCHG: dc_suspend: 0 voting for 0 - off
1575<3>[ 1.608227 / 01-01 00:00:01.599][2] vote: name[SMBCHG: dcl_icl], client_id[0], state[1], val[1500]
1576<7>[ 1.608232 / 01-01 00:00:01.599][2] SMBCHG: dcl_icl: 0 voting for 1500 - on
1577<7>[ 1.608237 / 01-01 00:00:01.599][2] SMBCHG: dcl_icl: vote_min min_vote=1500, client_index=0
1578<7>[ 1.608241 / 01-01 00:00:01.599][2] SMBCHG: dcl_icl: effective vote is now 1500 voted by 0
1579<6>[ 1.608246 / 01-01 00:00:01.599][2] SMBCHG: smbchg_set_dc_current_max: dc current set to 1500 mA
1580<3>[ 1.608328 / 01-01 00:00:01.599][2] vote: name[SMBCHG: fcc], client_id[1], state[1], val[3100]
1581<7>[ 1.608334 / 01-01 00:00:01.599][2] SMBCHG: fcc: 1 voting for 3100 - on
1582<7>[ 1.608338 / 01-01 00:00:01.599][2] SMBCHG: fcc: vote_min min_vote=3100, client_index=1
1583<7>[ 1.608342 / 01-01 00:00:01.599][2] SMBCHG: fcc: effective vote is now 3100 voted by 1
1584<6>[ 1.608439 / 01-01 00:00:01.599][2] SMBCHG: smbchg_set_fastchg_current_raw: fastcharge current requested 3100, set to 3000
1585<3>[ 1.608519 / 01-01 00:00:01.599][2] vote: name[SMBCHG: hwaicl_enable_indirect], client_id[0], state[1], val[0]
1586<7>[ 1.608524 / 01-01 00:00:01.599][2] SMBCHG: hwaicl_enable_indirect: 0 voting for 0 - on
1587<3>[ 1.608529 / 01-01 00:00:01.599][2] vote: name[SMBCHG: hwaicl_disable], client_id[0], state[0], val[0]
1588<7>[ 1.608534 / 01-01 00:00:01.599][2] SMBCHG: hwaicl_disable: 0 voting for 0 - off
1589<6>[ 1.608781 / 01-01 00:00:01.599][2] SMBCHG: batt_pres_handler: triggered: 0x00
1590<6>[ 1.608786 / 01-01 00:00:01.599][2] SMBCHG: smbchg_stay_awake: staying awake: 0x02 (bit 2)
1591<6>[ 1.608792 / 01-01 00:00:01.599][2] SMBCHG: smbchg_vfloat_adjust_check: Starting vfloat adjustments
1592<6>[ 1.608838 / 01-01 00:00:01.599][2] SMBCHG: smbchg_relax: relaxing: 0x00 (bit 2)
1593<6>[ 1.608988 / 01-01 00:00:01.599][2] SMBCHG: usbid_change_handler: triggered
1594<3>[ 1.608998 / 01-01 00:00:01.599][2] FG: set_resume_soc_work: recharge_M 0(ta)-0(lowered)-0(chg_done)-1(health)
1595<6>[ 1.630050 / 01-01 00:00:01.629][2] SMBCHG: get_property_from_typec: typec psy doesn't prepared
1596<6>[ 1.630084 / 01-01 00:00:01.629][2] dwc3_msm_power_get_property_usb: POWER_SUPPLY_PROP_VOLTAGE_NOW
1597<6>[ 1.630313 / 01-01 00:00:01.629][2] SMBCHG: src_detect_handler: chip->usb_present = 0 usb_present = 1 src_detect = 1 hvdcp_3_det_ignore_uv=0
1598<3>[ 1.630320 / 01-01 00:00:01.629][2] vote: name[SMBCHG: hwaicl_disable], client_id[1], state[0], val[0]
1599<7>[ 1.630325 / 01-01 00:00:01.629][2] SMBCHG: hwaicl_disable: 1 voting for 0 - off
1600<3>[ 1.630329 / 01-01 00:00:01.629][2] vote: name[SMBCHG: usb_suspend], client_id[6], state[0], val[0]
1601<7>[ 1.630334 / 01-01 00:00:01.629][2] SMBCHG: usb_suspend: 6 voting for 0 - off
1602<6>[ 1.630338 / 01-01 00:00:01.629][2] SMBCHG: handle_usb_insertion: triggered
1603<6>[ 1.630370 / 01-01 00:00:01.629][2] SMBCHG: handle_usb_insertion: inserted type = 4 (SDP)
1604<6>[ 1.630376 / 01-01 00:00:01.629][2] SMBCHG: smbchg_change_usb_supply_type: Type 4: setting mA = 100
1605<3>[ 1.630382 / 01-01 00:00:01.629][2] vote: name[SMBCHG: usb_icl], client_id[0], state[1], val[100]
1606<7>[ 1.630387 / 01-01 00:00:01.629][2] SMBCHG: usb_icl: 0 voting for 100 - on
1607<7>[ 1.630391 / 01-01 00:00:01.629][2] SMBCHG: usb_icl: vote_min min_vote=100, client_index=0
1608<7>[ 1.630395 / 01-01 00:00:01.629][2] SMBCHG: usb_icl: effective vote is now 100 voted by 0
1609<6>[ 1.630400 / 01-01 00:00:01.629][2] SMBCHG: smbchg_set_usb_current_max: USB current_ma = 100
1610<3>[ 1.630405 / 01-01 00:00:01.629][2] vote: name[SMBCHG: usb_suspend], client_id[2], state[0], val[0]
1611<7>[ 1.630410 / 01-01 00:00:01.629][2] SMBCHG: usb_suspend: 2 voting for 0 - off
1612<6>[ 1.630487 / 01-01 00:00:01.629][2] SMBCHG: smbchg_set_usb_current_max: usb type = 4 current set to 100 mA
1613<3>[ 1.630505 / 01-01 00:00:01.629][2] vote: name[SMBCHG: usb_icl], client_id[9], state[1], val[2000]
1614<7>[ 1.630510 / 01-01 00:00:01.629][2] SMBCHG: usb_icl: 9 voting for 2000 - on
1615<7>[ 1.630514 / 01-01 00:00:01.629][2] SMBCHG: usb_icl: vote_min min_vote=100, client_index=0
1616<6>[ 1.630521 / 01-01 00:00:01.629][2] msm-dwc3 6a00000.ssusb: dwc3_msm_power_set_property_usb: charger type: USB_SDP_CHARGER
1617<6>[ 1.630530 / 01-01 00:00:01.629][2] [DWC3] factory mode 0
1618<6>[ 1.630536 / 01-01 00:00:01.629][2] dwc3_floated_chg_check: start check floated charger
1619<6>[ 1.630649 / 01-01 00:00:01.629][2] msm-dwc3 6a00000.ssusb: dwc3_msm_power_set_property_usb: notify xceiv event with val:1, vbus_active:0
1620<6>[ 1.630654 / 01-01 00:00:01.629][2] dwc3_ext_event_notify
1621<6>[ 1.630668 / 01-01 00:00:01.629][2] msm-dwc3 6a00000.ssusb: undefined state, vbus:online
1622<3>[ 1.631072 / 01-01 00:00:01.629][2] i2c-msm-v2 75b5000.i2c: msm_bus_scale_register_client(mstr-id:84):0x20 (ok)
1623<3>[ 1.632692 / 01-01 00:00:01.629][2] [LGE-CD] lge_cable_detect_external_power_changed : chg_present 1, prev 0
1624<3>[ 1.632699 / 01-01 00:00:01.629][2] [LGE-CD] lge_cable_detect_external_power_changed : ibat 500000, iusb 500000
1625<6>[ 1.632712 / 01-01 00:00:01.629][2] dwc3_msm_power_get_property_usb: POWER_SUPPLY_PROP_VOLTAGE_NOW
1626<6>[ 1.632836 / 01-01 00:00:01.629][2] lge_power_changed_work
1627<6>[ 1.632849 / 01-01 00:00:01.629][2] [LGE-CC] lge_cc_external_lge_power_changed : usb present : 1
1628<3>[ 1.633218 / 01-01 00:00:01.629][2] SMB1351 smb1351_fastchg_current_set: smb1351_fastchg_current_set - fastchg_current[1000]
1629<3>[ 1.634606 / 01-01 00:00:01.629][2] SMB1351 smb1351_usb_suspend: reason = 4 requested_suspend = 1 suspended_status = 0
1630<3>[ 1.634851 / 01-01 00:00:01.629][2] SMB1351 smb1351_usb_suspend: reason = 16 requested_suspend = 0 suspended_status = 4
1631<6>[ 1.635289 / 01-01 00:00:01.629][2] dwc3_msm_power_get_property_usb: POWER_SUPPLY_PROP_VOLTAGE_NOW
1632<6>[ 1.635495 / 01-01 00:00:01.629][1] SMBCHG: handle_usb_insertion: triggered
1633<6>[ 1.635533 / 01-01 00:00:01.629][1] SMBCHG: handle_usb_insertion: inserted type = 4 (SDP)
1634<6>[ 1.635540 / 01-01 00:00:01.629][1] SMBCHG: smbchg_change_usb_supply_type: Type 4: setting mA = 100
1635<3>[ 1.635550 / 01-01 00:00:01.629][1] vote: name[SMBCHG: usb_icl], client_id[0], state[1], val[100]
1636<7>[ 1.635556 / 01-01 00:00:01.629][1] SMBCHG: usb_icl: votes unchanged; skipping
1637<3>[ 1.635563 / 01-01 00:00:01.629][1] vote: name[SMBCHG: usb_icl], client_id[9], state[1], val[2000]
1638<7>[ 1.635569 / 01-01 00:00:01.629][1] SMBCHG: usb_icl: votes unchanged; skipping
1639<6>[ 1.635579 / 01-01 00:00:01.629][1] msm-dwc3 6a00000.ssusb: dwc3_msm_power_set_property_usb: charger type: USB_SDP_CHARGER
1640<6>[ 1.635594 / 01-01 00:00:01.629][1] [DWC3] factory mode 0
1641<6>[ 1.635603 / 01-01 00:00:01.629][1] dwc3_floated_chg_check: start check floated charger
1642<6>[ 1.635712 / 01-01 00:00:01.629][1] msm-dwc3 6a00000.ssusb: dwc3_msm_power_set_property_usb: notify xceiv event with val:1, vbus_active:1
1643<6>[ 1.635719 / 01-01 00:00:01.629][1] dwc3_ext_event_notify
1644<6>[ 1.636582 / 01-01 00:00:01.629][2] dwc3_msm_power_get_property_usb: POWER_SUPPLY_PROP_VOLTAGE_NOW
1645<6>[ 1.661763 / 01-01 00:00:01.659][2] [DWC3] factory mode 0
1646<6>[ 1.661791 / 01-01 00:00:01.659][0] [Touch] NOTIFY_CONNECTION!
1647<6>[ 1.661802 / 01-01 00:00:01.659][0] [Touch] TA Type: 1
1648<6>[ 1.661810 / 01-01 00:00:01.659][0] [Touch] sw49407_connect: write charger_state = 0x01
1649<6>[ 1.667621 / 01-01 00:00:01.659][1] msm-dwc3 6a00000.ssusb: b_peripheral state, vbus:online
1650<6>[ 1.667634 / 01-01 00:00:01.659][1] dwc3_msm_power_get_property_usb: POWER_SUPPLY_PROP_VOLTAGE_NOW
1651<3>[ 1.670353 / 01-01 00:00:01.669][1] vote: name[SMBCHG: battchg_suspend], client_id[1], state[0], val[0]
1652<7>[ 1.670366 / 01-01 00:00:01.669][1] SMBCHG: battchg_suspend: votes unchanged; skipping
1653<3>[ 1.671467 / 01-01 00:00:01.669][1] qpnp-smbcharger qpnp-smbcharger-16: node /soc/qcom,spmi@400f000/qcom,pmi8994@2/qcom,qpnp-smbcharger IO resource absent!
1654<6>[ 1.671495 / 01-01 00:00:01.669][1] msm-dwc3 6a00000.ssusb: dwc3_msm_power_set_property_usb: notify xceiv event with val:1, vbus_active:1
1655<6>[ 1.675259 / 01-01 00:00:01.669][1] qpnp-smbcharger qpnp-smbcharger-16: SMBCHG successfully probe Charger version=SCHG Revision DIG:2.0 ANA:2.1 batt=1 dc=0 usb=1
1656<6>[ 1.675268 / 01-01 00:00:01.669][1] SMBCHG: smbchg_probe: smbchg_probe end
1657<0>[ 1.675277 / 01-01 00:00:01.669][1] drv probe : 1606 qpnp-smbcharger 68
1658<6>[ 1.679159 / 01-01 00:00:01.669][1] FG: update_sram_data: soc:[50], soc_raw[9832], voltage:[4304174], ocv:[4346440], current:[447842], batt_temp:[-22], charge_raw [0 / 0]
1659<6>[ 1.679176 / 01-01 00:00:01.669][1] SMBCHG: smbchg_cc_esr_wa_check: ESR count is not zero, skipping
1660<3>[ 1.679186 / 01-01 00:00:01.669][1] SMBCHG: smbchg_config_chg_battery_type: BATTERY FULL NAME : LGE_BL44E1F_LGC_3200mAh
1661<3>[ 1.679233 / 01-01 00:00:01.669][1] vote: name[SMBCHG: usb_icl], client_id[0], state[1], val[0]
1662<7>[ 1.679241 / 01-01 00:00:01.669][1] SMBCHG: usb_icl: 0 voting for 0 - on
1663<7>[ 1.679247 / 01-01 00:00:01.669][1] SMBCHG: usb_icl: vote_min min_vote=0, client_index=0
1664<7>[ 1.679252 / 01-01 00:00:01.669][1] SMBCHG: usb_icl: effective vote is now 0 voted by 0
1665<6>[ 1.679258 / 01-01 00:00:01.669][1] SMBCHG: smbchg_set_usb_current_max: USB current_ma = 0
1666<3>[ 1.679266 / 01-01 00:00:01.669][1] vote: name[SMBCHG: usb_suspend], client_id[2], state[1], val[0]
1667<7>[ 1.679272 / 01-01 00:00:01.669][1] SMBCHG: usb_suspend: 2 voting for 0 - on
1668<6>[ 1.679307 / 01-01 00:00:01.669][1] SMBCHG: smbchg_set_usb_current_max: usb type = 4 current set to 0 mA
1669<6>[ 1.679329 / 01-01 00:00:01.669][1] SMBCHG: smbchg_stay_awake: staying awake: 0x01 (bit 1)
1670<6>[ 1.679340 / 01-01 00:00:01.669][1] SMBCHG: smbchg_vfloat_adjust_check: Starting vfloat adjustments
1671<6>[ 1.679359 / 01-01 00:00:01.669][1] dwc3_msm_power_get_property_usb: POWER_SUPPLY_PROP_VOLTAGE_NOW
1672<6>[ 1.679369 / 01-01 00:00:01.669][2] SMBCHG: power_ok_handler: triggered: 0x00
1673<6>[ 1.681261 / 01-01 00:00:01.679][2] usb_otg_vreg: no parameters
1674<6>[ 1.681287 / 01-01 00:00:01.679][2] usb_otg_vreg: supplied by smbcharger_external_otg
1675<3>[ 1.682020 / 01-01 00:00:01.679][1] vote: name[SMBCHG: battchg_suspend], client_id[1], state[0], val[0]
1676<7>[ 1.682031 / 01-01 00:00:01.679][1] SMBCHG: battchg_suspend: votes unchanged; skipping
1677<3>[ 1.682039 / 01-01 00:00:01.679][1] SMBCHG: smbchg_config_chg_battery_type: BATTERY FULL NAME : LGE_BL44E1F_LGC_3200mAh
1678<6>[ 1.682057 / 01-01 00:00:01.679][2] anx7688-usbc 6-0028: usb pd max volt: 9000mV, max power: 27000mW, min power: 3000mW
1679<3>[ 1.682084 / 01-01 00:00:01.679][1] vote: name[SMBCHG: usb_icl], client_id[0], state[1], val[0]
1680<7>[ 1.682091 / 01-01 00:00:01.679][1] SMBCHG: usb_icl: votes unchanged; skipping
1681<6>[ 1.682097 / 01-01 00:00:01.679][1] SMBCHG: smbchg_vfloat_adjust_check: Starting vfloat adjustments
1682<6>[ 1.682126 / 01-01 00:00:01.679][1] dwc3_msm_power_get_property_usb: POWER_SUPPLY_PROP_VOLTAGE_NOW
1683<6>[ 1.683474 / 01-01 00:00:01.679][3] SMBCHG: fastchg_handler: p2f triggered
1684<6>[ 1.683498 / 01-01 00:00:01.679][3] SMBCHG: smbchg_vfloat_adjust_check: Starting vfloat adjustments
1685<3>[ 1.702946 / 01-01 00:00:01.699][2] i2c-msm-v2 757a000.i2c: msm_bus_scale_register_client(mstr-id:86):0x21 (ok)
1686<6>[ 1.753668 / 01-01 00:00:01.749][2] anx7688-usbc 6-0028: boot load done
1687<6>[ 1.756302 / 01-01 00:00:01.749][0] [LGE][MMC][mmc_read_ssr ( )] mmc_hostname:mmc0, 4 ==> SPEED_CLASS 10
1688<6>[ 1.758830 / 01-01 00:00:01.749][2] anx7688-usbc 6-0028: request_firmware(analogix/mi1_eeprom_20_8b.img)
1689<6>[ 1.811899 / 01-01 00:00:01.809][0] mmc0: new ultra high speed SDR104 SDXC card at address 0001
1690<6>[ 1.811912 / 01-01 00:00:01.809][0] [LGE][MMC][mmc_add_card ( )] mmc_hostname:mmc0, type:SDXC
1691<6>[ 1.812120 / 01-01 00:00:01.809][0] sdhci_msm_pm_qos_cpu_init (): voted for group #0 (mask=0x3) latency=70 (0xffffffc0f577a000)
1692<6>[ 1.812139 / 01-01 00:00:01.809][0] sdhci_msm_pm_qos_cpu_init (): voted for group #1 (mask=0xc) latency=70 (0xffffffc0f577a008)
1693<6>[ 1.812237 / 01-01 00:00:01.809][0] mmcblk0: mmc0:0001 00000 238 GiB
1694<6>[ 1.814121 / 01-01 00:00:01.809][0] mmcblk0: p1
1695<6>[ 1.814356 / 01-01 00:00:01.809][0] [LGE][MMC][mmc_add_card ( )] device_add & uevent posting complete!
1696<6>[ 1.934248 / 01-01 00:00:01.929][1] sdc: sdc1 sdc2 sdc3
1697<6>[ 1.934305 / 01-01 00:00:01.929][3] sdf: sdf1 sdf2 sdf3 sdf4 sdf5
1698<6>[ 1.934330 / 01-01 00:00:01.929][2] sdg: sdg1 sdg2
1699<6>[ 1.934477 / 01-01 00:00:01.929][0] sda: sda1 sda2 sda3 sda4 sda5 sda6 sda7 sda8 sda9 sda10 sda11 sda12 sda13 sda14 sda15 sda16 sda17 sda18 sda19 sda20 sda21
1700<6>[ 1.934853 / 01-01 00:00:01.929][2] sde: sde1 sde2 sde3 sde4 sde5 sde6 sde7 sde8 sde9 sde10 sde11 sde12 sde13 sde14 sde15 sde16 sde17 sde18 sde19 sde20 sde21 sde22 sde23 sde24 sde25 sde26 sde27 sde28 sde29
1701<6>[ 1.934899 / 01-01 00:00:01.929][3] sdd: sdd1 sdd2 sdd3 sdd4 sdd5
1702<6>[ 1.936900 / 01-01 00:00:01.929][1] sdb: sdb1 sdb2 sdb3 sdb4 sdb5 sdb6 sdb7
1703<6>[ 2.180071 / 01-01 00:00:02.179][1] SMBCHG: smbchg_parallel_usb_en_work: AICL at 1700
1704<6>[ 2.180113 / 01-01 00:00:02.179][1] SMBCHG: smbchg_is_parallel_usb_ok: Not in fast charge, skipping
1705<6>[ 2.180122 / 01-01 00:00:02.179][1] SMBCHG: smbchg_relax: relaxing: 0x00 (bit 1)
1706<6>[ 2.690064 / 01-01 00:00:02.689][1] SMBCHG: smbchg_parallel_usb_en_work: AICL at 1700
1707<6>[ 2.690099 / 01-01 00:00:02.689][1] SMBCHG: smbchg_is_parallel_usb_ok: Not in fast charge, skipping
1708<6>[ 2.931967 / 01-01 00:00:02.929][2] FG: comp_temp_by_chg_current: fg_temp = 277 comp_temp1 = 247 comp_temp2 = 247 delta1 = -30 delta2 = 0 avg_chg_curr = 0 now_chg_curr = 0 batt_charging = 0
1709<3>[ 2.932070 / 01-01 00:00:02.929][2] vote: name[SMBCHG: battchg_suspend], client_id[0], state[1], val[0]
1710<7>[ 2.932077 / 01-01 00:00:02.929][2] SMBCHG: battchg_suspend: 0 voting for 0 - on
1711<6>[ 2.932083 / 01-01 00:00:02.929][2] SMBCHG: charging_suspend_vote_cb: client[0], suspend[1], last_client[0], last_suspend[1]
1712<6>[ 2.941007 / 01-01 00:00:02.939][2] FG: update_sram_data: soc:[50], soc_raw[9832], voltage:[4318364], ocv:[4346440], current:[328214], batt_temp:[247], charge_raw [0 / 0]
1713<6>[ 3.630056 / 01-01 00:00:03.629][2] determine_lge_charging_state : states_change[0], next_state[0], pseudo_chg_ui[0]
1714<3>[ 3.630065 / 01-01 00:00:03.629][2] LGE charging scenario : state 0 -> 0(0-1), temp=24, volt=4318, BTM=0, charger=1, cur_set=0/0, chg_cur = 328
1715<6>[ 3.630071 / 01-01 00:00:03.629][2] [LGE-CC] lge_monitor_batt_temp_work : ibatmax_set CHG_BATT_NORMAL_STATE
1716<6>[ 3.630076 / 01-01 00:00:03.629][2] [LGE-CC] lge_monitor_batt_temp_work : otp_ibat_current=0
1717<6>[ 3.630082 / 01-01 00:00:03.629][2] [LGE-CC] lge_monitor_batt_temp_work : chg_wake_locked
1718<6>[ 3.630089 / 01-01 00:00:03.629][2] [LGE-CC] lge_monitor_batt_temp_work : Reported Capacity : 50 / voltage : 4318
1719<6>[ 3.630095 / 01-01 00:00:03.629][2] lge_power_changed_work
1720<6>[ 3.630108 / 01-01 00:00:03.629][2] SMBCHG: smbchg_external_lge_power_changed: [LGE-CC] fcc 3100, otp set 3100
1721<6>[ 3.630114 / 01-01 00:00:03.629][2] SMBCHG: lgcc_set_ibat_current: chg_current[3100]
1722<3>[ 3.630119 / 01-01 00:00:03.629][2] vote: name[SMBCHG: fcc], client_id[5], state[1], val[3100]
1723<7>[ 3.630124 / 01-01 00:00:03.629][2] SMBCHG: fcc: 5 voting for 3100 - on
1724<7>[ 3.630128 / 01-01 00:00:03.629][2] SMBCHG: fcc: vote_min min_vote=3100, client_index=1
1725<3>[ 3.630132 / 01-01 00:00:03.629][2] vote: name[SMBCHG: battchg_suspend], client_id[2], state[0], val[0]
1726<7>[ 3.630137 / 01-01 00:00:03.629][2] SMBCHG: battchg_suspend: 2 voting for 0 - off
1727<6>[ 4.930236 / 01-01 00:00:04.929][2] FG: update_battery_type: battery_id : 187
1728<6>[ 4.930248 / 01-01 00:00:04.929][2] of_batterydata_get_best_profile: LGE_BL44E1F_LGC_3200mAh found
1729<6>[ 4.935134 / 01-01 00:00:04.929][2] FG: fg_set_minfreq: Set minfreq enable
1730<6>[ 4.935181 / 01-01 00:00:04.929][2] FG: fg_batt_profile_init: vbat_est_diff = 8697, v_current_pred: 4309667, v:4318364
1731<6>[ 4.936675 / 01-01 00:00:04.929][2] FG: fg_set_minfreq: Set minfreq disable
1732<3>[ 4.936684 / 01-01 00:00:04.929][2] vote: name[SMBCHG: battchg_suspend], client_id[0], state[0], val[0]
1733<7>[ 4.936689 / 01-01 00:00:04.929][2] SMBCHG: battchg_suspend: 0 voting for 0 - off
1734<6>[ 4.936694 / 01-01 00:00:04.929][2] SMBCHG: charging_suspend_vote_cb: client[0], suspend[0], last_client[0], last_suspend[0]
1735<6>[ 4.942203 / 01-01 00:00:04.939][2] FG: fg_batt_profile_init: soc:[100], voltage:[4318364], ocv:[4346440], current:[328214], batt_temp:[247],cycle_count : [0], residence : [121276]
1736<3>[ 4.942363 / 01-01 00:00:04.939][2] vote: name[SMBCHG: battchg_suspend], client_id[1], state[0], val[0]
1737<7>[ 4.942369 / 01-01 00:00:04.939][2] SMBCHG: battchg_suspend: votes unchanged; skipping
1738<6>[ 4.942422 / 01-01 00:00:04.939][2] SMBCHG: smbchg_cc_esr_wa_check: Not in fast charge, skipping
1739<3>[ 4.942429 / 01-01 00:00:04.939][2] SMBCHG: smbchg_config_chg_battery_type: BATTERY FULL NAME : LGE_BL44E1F_LGC_3200mAh
1740<3>[ 4.942466 / 01-01 00:00:04.939][2] vote: name[SMBCHG: usb_icl], client_id[0], state[1], val[0]
1741<7>[ 4.942471 / 01-01 00:00:04.939][2] SMBCHG: usb_icl: votes unchanged; skipping
1742<6>[ 4.942476 / 01-01 00:00:04.939][2] SMBCHG: smbchg_stay_awake: staying awake: 0x02 (bit 2)
1743<6>[ 4.942482 / 01-01 00:00:04.939][2] SMBCHG: smbchg_vfloat_adjust_check: Starting vfloat adjustments
1744<6>[ 4.942718 / 01-01 00:00:04.939][2] SMBCHG: smbchg_relax: relaxing: 0x00 (bit 2)
1745<6>[ 5.014346 / 01-01 00:00:05.009][2] FG: update_sram_data: soc:[100], soc_raw[9832], voltage:[4322331], ocv:[4346440], current:[289457], batt_temp:[247], charge_raw [3113738 / 3167000]
1746<6>[ 10.260100 / 01-01 00:00:10.259][1] pet_watchdog [enable : 1, jiffies : 4294938322, delay_time : 1000]
1747<6>[ 20.280120 / 01-01 00:00:20.279][1] pet_watchdog [enable : 1, jiffies : 4294939324, delay_time : 1000]
1748<6>[ 30.300115 / 01-01 00:00:30.299][1] pet_watchdog [enable : 1, jiffies : 4294940326, delay_time : 1000]
1749<6>[ 31.120045 / 01-01 00:00:31.119][0] Calling earjack_debugger_set_uart
1750<6>[ 32.005839 / 01-01 00:00:31.999][3] SMBCHG: lgcc_charger_reginfo: [STATUS] USB_PRESENT[1], PARALLEL_STATUS[3], USB_TYPE[SDP]
1751<6>[ 32.005849 / 01-01 00:00:31.999][3] SMBCHG: lgcc_charger_reginfo: [STATUS] TOTAL_IUSB[0], PMI_IUSB[1700], SMB_IUSB[0]
1752<6>[ 32.005855 / 01-01 00:00:31.999][3] SMBCHG: lgcc_charger_reginfo: [STATUS] TOTAL_IBAT[3100/3100(vote)], PMI_IBAT[3000], SMB_IBAT[1000]
1753<6>[ 32.005862 / 01-01 00:00:31.999][3] SMBCHG: lgcc_charger_reginfo: [STATUS] CABLE_ID [OPEN], CABLE_INFO[SDP], USBIN_VOL[4989]
1754<6>[ 32.005868 / 01-01 00:00:31.999][3] SMBCHG: lgcc_charger_reginfo: [STATUS] BATT_SOC[100], BATT_VOL[4322], BATT_TEMP[250], BATT_CUR[289457]
1755<6>[ 32.005875 / 01-01 00:00:31.999][3] SMBCHG: lgcc_charger_reginfo: [STATUS] CHG_EN[Enable], CHG_STATE[DISCHARGING/DIS/NONE], SAFTY_STATE[Set/Not yet]
1756<6>[ 32.005881 / 01-01 00:00:31.999][3] SMBCHG: lgcc_charger_reginfo: [STATUS] XO_tHERM[30], PA_THERM[27], BOARD_THERM[27] VTS[290]
1757<6>[ 35.047722 / 01-01 00:00:35.039][2] FG: update_sram_data: soc:[100], soc_raw[9826], voltage:[4316838], ocv:[4346440], current:[288236], batt_temp:[250], charge_raw [3111254 / 3167000]
1758<6>[ 40.320115 / 01-01 00:00:40.319][1] pet_watchdog [enable : 1, jiffies : 4294941328, delay_time : 1000]
1759<6>[ 46.965711 / 01-01 00:00:46.959][3] SMBCHG: lgcc_charger_reginfo: [STATUS] USB_PRESENT[1], PARALLEL_STATUS[3], USB_TYPE[SDP]
1760<6>[ 46.965720 / 01-01 00:00:46.959][3] SMBCHG: lgcc_charger_reginfo: [STATUS] TOTAL_IUSB[0], PMI_IUSB[1700], SMB_IUSB[0]
1761<6>[ 46.965726 / 01-01 00:00:46.959][3] SMBCHG: lgcc_charger_reginfo: [STATUS] TOTAL_IBAT[3100/3100(vote)], PMI_IBAT[3000], SMB_IBAT[1000]
1762<6>[ 46.965732 / 01-01 00:00:46.959][3] SMBCHG: lgcc_charger_reginfo: [STATUS] CABLE_ID [OPEN], CABLE_INFO[SDP], USBIN_VOL[4986]
1763<6>[ 46.965737 / 01-01 00:00:46.959][3] SMBCHG: lgcc_charger_reginfo: [STATUS] BATT_SOC[100], BATT_VOL[4316], BATT_TEMP[250], BATT_CUR[288236]
1764<6>[ 46.965743 / 01-01 00:00:46.959][3] SMBCHG: lgcc_charger_reginfo: [STATUS] CHG_EN[Enable], CHG_STATE[DISCHARGING/DIS/NONE], SAFTY_STATE[Set/Not yet]
1765<6>[ 46.965749 / 01-01 00:00:46.959][3] SMBCHG: lgcc_charger_reginfo: [STATUS] XO_tHERM[30], PA_THERM[27], BOARD_THERM[27] VTS[290]
1766<6>[ 50.340112 / 01-01 00:00:50.339][1] pet_watchdog [enable : 1, jiffies : 4294942330, delay_time : 1000]
1767<6>[ 60.360123 / 01-01 00:01:00.359][1] pet_watchdog [enable : 1, jiffies : 4294943332, delay_time : 1000]
1768<3>[ 61.920111 / 01-01 00:01:01.919][3] anx7688-usbc 6-0028: request_firmware failed -11
1769<3>[ 61.920119 / 01-01 00:01:01.919][3] anx7688-usbc 6-0028: firmware alloc failed
1770<6>[ 61.920608 / 01-01 00:01:01.919][3] anx7688-usbc 6-0028: VID: 0xaaaa PID: 0x7688 HWREV: 0xac STDALN FW: 0x208b
1771<3>[ 61.924809 / 01-01 00:01:01.919][3] anx7688-usbc 6-0028: fail to request firmware
1772<0>[ 61.924829 / 01-01 00:01:01.919][3] bus probe : 1681 anx7688-usbc 60242
1773<4>[ 61.924928 / 01-01 00:01:01.919][3] anx7688-usbc: probe of 6-0028 failed with error -12
1774<6>[ 61.927931 / 01-01 00:01:01.919][2] Creating CPU group 0
1775<6>[ 61.927940 / 01-01 00:01:01.919][2] Init CPU0 state
1776<6>[ 61.927945 / 01-01 00:01:01.919][2] Init CPU1 state
1777<6>[ 61.928064 / 01-01 00:01:01.919][3] Creating CPU group 2
1778<6>[ 61.928071 / 01-01 00:01:01.919][3] Init CPU2 state
1779<6>[ 61.928076 / 01-01 00:01:01.919][3] Init CPU3 state
1780<5>[ 61.928310 / 01-01 00:01:01.919][3] Loading compiled-in X.509 certificates
1781<5>[ 61.928383 / 01-01 00:01:01.919][3] random: nonblocking pool is initialized
1782<5>[ 61.928813 / 01-01 00:01:01.919][3] Key type encrypted registered
1783<3>[ 61.948115 / 01-01 00:01:01.939][3] Unable to find log_buf by kallsyms!
1784<6>[ 61.949217 / 01-01 00:01:01.939][2] monitor-thermal soc:lge,monitor-thermal: LGE monitor thermal Initialized
1785<6>[ 61.949903 / 01-01 00:01:01.939][2] power_sysfs_parse_dt : Total sysfs node is 57
1786<6>[ 61.949915 / 01-01 00:01:01.939][2] power_sysfs_parse_dt : xo_therm path is mandatory
1787<6>[ 61.949921 / 01-01 00:01:01.939][2] power_sysfs_parse_dt : batt_therm path is mandatory
1788<6>[ 61.949945 / 01-01 00:01:01.939][2] power_sysfs_parse_dt : health path is mandatory
1789<6>[ 61.949959 / 01-01 00:01:01.939][2] power_sysfs_parse_dt : status path is mandatory
1790<6>[ 61.950245 / 01-01 00:01:01.949][2] power_sysfs_make_path : pa_therm0 user node didn't have kernel node
1791<6>[ 61.950270 / 01-01 00:01:01.949][2] power_sysfs_make_path : ac_online user node didn't have kernel node
1792<6>[ 61.950280 / 01-01 00:01:01.949][2] power_sysfs_make_path : wlc_online user node didn't have kernel node
1793<6>[ 61.950292 / 01-01 00:01:01.949][2] power_sysfs_make_path : iusb_control user node didn't have kernel node
1794<6>[ 61.950299 / 01-01 00:01:01.949][2] power_sysfs_make_path : wlc_thermal_mitigation user node didn't have kernel node
1795<6>[ 61.950320 / 01-01 00:01:01.949][2] power_sysfs_make_path : speed_bin user node didn't have kernel node
1796<6>[ 61.950325 / 01-01 00:01:01.949][2] power_sysfs_make_path : pvs_bin user node didn't have kernel node
1797<6>[ 61.950344 / 01-01 00:01:01.949][2] power_sysfs_probe : Success Power sysfs Init
1798<6>[ 61.950548 / 01-01 00:01:01.949][2] lge_boost_bypass_init : start
1799<3>[ 61.951000 / 01-01 00:01:01.949][2] lge_boost_bypass_probe : probe
1800<3>[ 61.951009 / 01-01 00:01:01.949][2] lge_boost_bypass_parse_dt : name = pmi8994_boostbypass / volt = 3600000/3400000
1801<3>[ 61.951054 / 01-01 00:01:01.949][2] lge_boost_bypass_regulator_setup : regulator exist
1802<3>[ 61.951060 / 01-01 00:01:01.949][2] lge_boost_bypass_regulator_setup : vote boost bypass set to on
1803<3>[ 61.951190 / 01-01 00:01:01.949][2] lge_boost_bypass_probe : success
1804<6>[ 61.951806 / 01-01 00:01:01.949][3] fastrpc soc:qcom,msm-adsprpc-mem: for adsp_rh segments only will be dumped.
1805<6>[ 61.951873 / 01-01 00:01:01.949][3] adsprpc: channel link type: 0
1806<6>[ 61.964028 / 01-01 00:01:01.959][3] RNDIS_IPA module is loaded.
1807<6>[ 61.964511 / 01-01 00:01:01.959][3] android_usb 66bf0c8.android_usb: device tree enabled
1808<6>[ 61.964688 / 01-01 00:01:01.959][3] usb_gadget_probe_driver
1809<6>[ 61.964695 / 01-01 00:01:01.959][3] gadget name udc->gadget->name dwc3-gadget
1810<6>[ 61.964701 / 01-01 00:01:01.959][3]
1811<6>[ 61.964701 / 01-01 00:01:01.959][3] ********************************************
1812<6>[ 61.964705 / 01-01 00:01:01.959][3]
1813<6>[ 61.964705 / 01-01 00:01:01.959][3] No of UDCs: 1
1814<6>[ 61.964713 / 01-01 00:01:01.959][3] driver->function: android_usb
1815<6>[ 61.964715 / 01-01 00:01:01.959][3]
1816<6>[ 61.964715 / 01-01 00:01:01.959][3] ********************************************
1817<6>[ 61.964724 / 01-01 00:01:01.959][3] udc->gadget->usb_core_id : 0
1818<6>[ 61.964727 / 01-01 00:01:01.959][3]
1819<6>[ 61.964727 / 01-01 00:01:01.959][3] driver->usb_core_id: 0
1820<6>[ 61.964777 / 01-01 00:01:01.959][3] file system registered
1821<6>[ 61.964808 / 01-01 00:01:01.959][3] mbim_init: initialize 1 instances
1822<6>[ 61.964846 / 01-01 00:01:01.959][3] mbim_init: Initialized 1 ports
1823<6>[ 61.965622 / 01-01 00:01:01.959][3] rndis_qc_init: initialize rndis QC instance
1824<6>[ 61.965765 / 01-01 00:01:01.959][3] Number of LUNs=8
1825<6>[ 61.965774 / 01-01 00:01:01.959][3] Mass Storage Function, version: 2009/09/11
1826<6>[ 61.965781 / 01-01 00:01:01.959][3] LUN: removable file: (no medium)
1827<6>[ 61.965795 / 01-01 00:01:01.959][3] Number of LUNs=1
1828<6>[ 61.965820 / 01-01 00:01:01.959][3] LUN: removable file: (no medium)
1829<6>[ 61.965825 / 01-01 00:01:01.959][3] Number of LUNs=1
1830<6>[ 61.965996 / 01-01 00:01:01.959][3] evp_setup: evp_setup:
1831<6>[ 61.966005 / 01-01 00:01:01.959][3] evp_get_product_string: evp_get_product_string: evp convert string, maxV=07E, minV=03C, feature=08
1832<6>[ 61.966010 / 01-01 00:01:01.959][3] evp_get_product_string: evp_get_product_string: strings_evp = Maxim EVP gr8rFiV8US07E03C08
1833<6>[ 61.966017 / 01-01 00:01:01.959][3] android_usb gadget: android_usb ready
1834<6>[ 61.966023 / 01-01 00:01:01.959][3] udc->gadget->name: dwc3-gadget
1835<3>[ 61.968281 / 01-01 00:01:01.959][3] hallic_dev switch registration success
1836<6>[ 61.968402 / 01-01 00:01:01.959][3] input: gpio-keys as /devices/soc/soc:gpio_keys/input/input2
1837<6>[ 61.969791 / 01-03 15:39:09.500][3] qcom,qpnp-rtc qpnp-rtc-8: setting system clock to 2016-01-03 15:39:09 UTC (1451835549)
1838<3>[ 61.972738 / 01-03 15:39:09.500][3] power_supply_callback: BCL state of SoC is 1
1839<6>[ 61.977246 / 01-03 15:39:09.500][1] lmh_lite:lmh_parse_sensor Registering sensor:[DLMt_APC1]
1840<6>[ 61.977515 / 01-03 15:39:09.500][0] lmh_lite:lmh_parse_sensor Registering sensor:[LLM_cp00]
1841<6>[ 61.977702 / 01-03 15:39:09.500][0] lmh_lite:lmh_parse_sensor Registering sensor:[LLM_cp01]
1842<6>[ 61.977871 / 01-03 15:39:09.500][0] lmh_lite:lmh_parse_sensor Registering sensor:[LLM_cp10]
1843<6>[ 61.978040 / 01-03 15:39:09.500][0] lmh_lite:lmh_parse_sensor Registering sensor:[LLM_cp11]
1844<6>[ 61.978209 / 01-03 15:39:09.500][0] lmh_lite:lmh_parse_sensor Registering sensor:[LLM_m4m0]
1845<6>[ 61.978372 / 01-03 15:39:09.500][0] lmh_lite:lmh_parse_sensor Registering sensor:[LLM_l21-]
1846<6>[ 61.978540 / 01-03 15:39:09.500][0] lmh_lite:lmh_parse_sensor Registering sensor:[LLM_l20-]
1847<6>[ 61.981548 / 01-03 15:39:09.509][0] vts_probe: vts: xo_therm is registered. chan=114, weight=500
1848<6>[ 61.981574 / 01-03 15:39:09.509][0] vts_probe: vts: bd_therm_2 is registered. chan=116, weight=270
1849<6>[ 61.981586 / 01-03 15:39:09.509][0] vts_probe: vts: Add 2 adc(s).
1850<6>[ 61.981593 / 01-03 15:39:09.509][0] vts_probe: vts: probe done.
1851<6>[ 61.981653 / 01-03 15:39:09.509][0] vts_probe: led_sensor: All of adc sensors are disabled.
1852<6>[ 61.981816 / 01-03 15:39:09.509][0] vts_probe: led_sensor: Add 0 adc(s).
1853<6>[ 61.981824 / 01-03 15:39:09.509][0] vts_probe: led_sensor: probe done.
1854<3>[ 61.982522 / 01-03 15:39:09.509][0] gpio_keys_gpio_report_event: code(115) state(0)
1855<3>[ 61.982537 / 01-03 15:39:09.509][0] gpio_keys_gpio_report_event: code(222) state(0)
1856<3>[ 61.983566 / 01-03 15:39:09.509][0] parse_cpu_levels: idx 1 545
1857<3>[ 61.983578 / 01-03 15:39:09.509][0] parse_cpu_levels: idx 2 6022
1858<3>[ 61.983586 / 01-03 15:39:09.509][0] parse_cpu_levels: idx 2 11499
1859<3>[ 61.983939 / 01-03 15:39:09.509][0] parse_cpu_levels: idx 1 545
1860<3>[ 61.983946 / 01-03 15:39:09.509][0] parse_cpu_levels: idx 2 6022
1861<3>[ 61.983953 / 01-03 15:39:09.509][0] parse_cpu_levels: idx 2 11499
1862<3>[ 61.988202 / 01-03 15:39:09.509][2] qcom,qpnp-flash-led qpnp-flash-led-26: Unable to acquire pinctrl
1863<6>[ 61.990695 / 01-03 15:39:09.519][2] rmnet_ipa started initialization
1864<6>[ 61.990708 / 01-03 15:39:09.519][2] IPA SSR support = True
1865<6>[ 61.990720 / 01-03 15:39:09.519][2] IPA ipa-loaduC = True
1866<6>[ 61.990732 / 01-03 15:39:09.519][2] IPA SG support = True
1867<3>[ 61.992468 / 01-03 15:39:09.519][3] ipa ipa_sps_irq_control_all:937 EP (5) not allocated.
1868<3>[ 61.992480 / 01-03 15:39:09.519][3] ipa ipa2_uc_state_check:301 uC is not loaded
1869<6>[ 61.993242 / 01-03 15:39:09.519][3] rmnet_ipa completed initialization
1870<6>[ 61.998809 / 01-03 15:39:09.519][3] qcom,cc-debug-8996 362000.qcom,cc-debug: Registered debug mux.
1871<6>[ 61.999661 / 01-03 15:39:09.519][3] usb_otg_vreg: disabling
1872<6>[ 61.999738 / 01-03 15:39:09.519][3] gdsc_mmagic_bimc: disabling
1873<6>[ 61.999778 / 01-03 15:39:09.519][3] kryo1-retention: disabling
1874<6>[ 61.999784 / 01-03 15:39:09.519][3] kryo0-retention: disabling
1875<6>[ 61.999789 / 01-03 15:39:09.519][3] gfx_mem_acc_corner: disabling
1876<6>[ 61.999795 / 01-03 15:39:09.519][3] apcc_l3_mem_acc_corner: disabling
1877<6>[ 61.999800 / 01-03 15:39:09.519][3] apc1_perfcl_mem_acc_corner: disabling
1878<6>[ 61.999805 / 01-03 15:39:09.519][3] apc0_pwrcl_mem_acc_corner: disabling
1879<6>[ 61.999814 / 01-03 15:39:09.519][3] regulator_proxy_consumer_remove_all: removing regulator proxy consumer requests
1880<4>[ 62.000198 / 01-03 15:39:09.529][2] dhd_module_init in
1881<4>[ 62.000472 / 01-03 15:39:09.529][2] found wifi platform device bcmdhd_wlan
1882<4>[ 62.000959 / 01-03 15:39:09.529][2] Power-up adapter 'DHD generic adapter'
1883<4>[ 62.000968 / 01-03 15:39:09.529][2] wifi_platform_set_power = 1
1884<4>[ 62.001005 / 01-03 15:39:09.529][2] [BRCM]: gpio_direction_output(1011,1)! ret = 0
1885<6>[ 62.005804 / 01-03 15:39:09.529][3] SMBCHG: lgcc_charger_reginfo: [STATUS] USB_PRESENT[1], PARALLEL_STATUS[3], USB_TYPE[SDP]
1886<6>[ 62.005813 / 01-03 15:39:09.529][3] SMBCHG: lgcc_charger_reginfo: [STATUS] TOTAL_IUSB[0], PMI_IUSB[1700], SMB_IUSB[0]
1887<6>[ 62.005819 / 01-03 15:39:09.529][3] SMBCHG: lgcc_charger_reginfo: [STATUS] TOTAL_IBAT[3100/3100(vote)], PMI_IBAT[3000], SMB_IBAT[1000]
1888<6>[ 62.005825 / 01-03 15:39:09.529][3] SMBCHG: lgcc_charger_reginfo: [STATUS] CABLE_ID [OPEN], CABLE_INFO[SDP], USBIN_VOL[4984]
1889<6>[ 62.005831 / 01-03 15:39:09.529][3] SMBCHG: lgcc_charger_reginfo: [STATUS] BATT_SOC[100], BATT_VOL[4316], BATT_TEMP[252], BATT_CUR[288236]
1890<6>[ 62.005837 / 01-03 15:39:09.529][3] SMBCHG: lgcc_charger_reginfo: [STATUS] CHG_EN[Enable], CHG_STATE[DISCHARGING/DIS/NONE], SAFTY_STATE[Set/Not yet]
1891<6>[ 62.005843 / 01-03 15:39:09.529][3] SMBCHG: lgcc_charger_reginfo: [STATUS] XO_tHERM[30], PA_THERM[27], BOARD_THERM[27] VTS[290]
1892<6>[ 62.006217 / 01-03 15:39:09.529][0] msm_pcie_enable: PCIe: Assert the reset of endpoint of RC0.
1893<6>[ 62.009735 / 01-03 15:39:09.529][0] msm_pcie_enable: PCIe RC0 PHY is ready!
1894<6>[ 62.019827 / 01-03 15:39:09.539][0] msm_pcie_enable: PCIe: Release the reset of endpoint of RC0.
1895<6>[ 62.055225 / 01-03 15:39:09.579][0] msm_pcie_enable: PCIe RC0 link initialized
1896<6>[ 62.055328 / 01-03 15:39:09.579][0] PCI host bridge /soc/qcom,pcie@00600000 ranges:
1897<6>[ 62.055340 / 01-03 15:39:09.579][0] No bus range found for /soc/qcom,pcie@00600000, using [bus 00-ff]
1898<6>[ 62.055358 / 01-03 15:39:09.579][0] IO 0x0c200000..0x0c2fffff -> 0x0c200000
1899<6>[ 62.055370 / 01-03 15:39:09.579][0] MEM 0x0c300000..0x0cffffff -> 0x0c300000
1900<6>[ 62.065500 / 01-03 15:39:09.589][0] pci-msm 600000.qcom,pcie: PCI host bridge to bus 0000:00
1901<6>[ 62.065513 / 01-03 15:39:09.589][0] pci_bus 0000:00: root bus resource [bus 00-ff]
1902<6>[ 62.065524 / 01-03 15:39:09.589][0] pci_bus 0000:00: root bus resource [io 0x0000-0xfffff] (bus address [0xc200000-0xc2fffff])
1903<6>[ 62.065533 / 01-03 15:39:09.589][0] pci_bus 0000:00: root bus resource [mem 0x0c300000-0x0cffffff]
1904<7>[ 62.065559 / 01-03 15:39:09.589][0] pci 0000:00:00.0: [17cb:0104] type 01 class 0x060400
1905<3>[ 62.065591 / 01-03 15:39:09.589][0] msm_pcie_oper_conf: Read of RC0 0:0x00 + 0x0014[4] is all FFs
1906<7>[ 62.065601 / 01-03 15:39:09.589][0] pci 0000:00:00.0: reg 0x10: [mem 0x00000000-0x00000fff 64bit]
1907<3>[ 62.065626 / 01-03 15:39:09.589][0] pci 0000:00:00.0: IOMMU is currently not supported for PCI
1908<7>[ 62.065659 / 01-03 15:39:09.589][0] pci 0000:00:00.0: PME# supported from D0 D3hot D3cold
1909<3>[ 62.065695 / 01-03 15:39:09.589][0] pci 0000:00:00.0: of_irq_parse_pci() failed with rc=-19
1910<6>[ 62.065988 / 01-03 15:39:09.589][0] pci 0000:00:00.0: bridge configuration invalid ([bus 00-00]), reconfiguring
1911<7>[ 62.066242 / 01-03 15:39:09.589][0] pci 0000:01:00.0: [14e4:43e9] type 00 class 0x028000
1912<3>[ 62.066378 / 01-03 15:39:09.589][0] msm_pcie_oper_conf: Read of RC0 1:0x00 + 0x0014[4] is all FFs
1913<7>[ 62.066387 / 01-03 15:39:09.589][0] pci 0000:01:00.0: reg 0x10: [mem 0x00000000-0x00007fff 64bit]
1914<3>[ 62.066474 / 01-03 15:39:09.589][0] msm_pcie_oper_conf: Read of RC0 1:0x00 + 0x001c[4] is all FFs
1915<7>[ 62.066483 / 01-03 15:39:09.589][0] pci 0000:01:00.0: reg 0x18: [mem 0x00000000-0x003fffff 64bit]
1916<3>[ 62.066598 / 01-03 15:39:09.589][0] pci 0000:01:00.0: IOMMU is currently not supported for PCI
1917<7>[ 62.066775 / 01-03 15:39:09.589][0] pci 0000:01:00.0: supports D1 D2
1918<7>[ 62.066782 / 01-03 15:39:09.589][0] pci 0000:01:00.0: PME# supported from D0 D1 D2 D3hot D3cold
1919<7>[ 62.067039 / 01-03 15:39:09.589][0] pci_bus 0000:01: busn_res: [bus 01-ff] end is updated to 01
1920<3>[ 62.067199 / 01-03 15:39:09.589][0] msm_pcie_oper_conf: Read of RC0 0:0x00 + 0x0028[4] is all FFs
1921<6>[ 62.067217 / 01-03 15:39:09.589][0] pci 0000:00:00.0: BAR 8: assigned [mem 0x0c400000-0x0c9fffff]
1922<6>[ 62.067228 / 01-03 15:39:09.589][0] pci 0000:00:00.0: BAR 0: assigned [mem 0x0c300000-0x0c300fff 64bit]
1923<6>[ 62.067246 / 01-03 15:39:09.589][0] pci 0000:01:00.0: BAR 2: assigned [mem 0x0c400000-0x0c7fffff 64bit]
1924<6>[ 62.067431 / 01-03 15:39:09.589][0] pci 0000:01:00.0: BAR 0: assigned [mem 0x0c800000-0x0c807fff 64bit]
1925<6>[ 62.067510 / 01-03 15:39:09.589][0] pci 0000:00:00.0: PCI bridge to [bus 01]
1926<6>[ 62.067542 / 01-03 15:39:09.589][0] pci 0000:00:00.0: bridge window [mem 0x0c400000-0x0c9fffff]
1927<3>[ 62.151036 / 01-03 15:39:09.679][2] bcm_wifi_set_power: wifi power successed to pull up
1928<4>[ 62.151043 / 01-03 15:39:09.679][2] wifi_platform_bus_enumerate device present 1
1929<3>[ 62.151049 / 01-03 15:39:09.679][2] msm_pcie_enumerate: PCIe: RC0 has already been enumerated.
1930<4>[ 62.151054 / 01-03 15:39:09.679][2] [BRCM] Card detect done
1931<4>[ 62.151091 / 01-03 15:39:09.679][2] PCI_PROBE: bus 1, slot 0,vendor 14E4, device 43E9(good PCI location)
1932<4>[ 62.151098 / 01-03 15:39:09.679][2] dhdpcie_init: found adapter info 'DHD generic adapter'
1933<4>[ 62.151109 / 01-03 15:39:09.679][2] alloc static buf at ffffffc0f5540000!
1934<6>[ 62.151487 / 01-03 15:39:09.679][2] pcieh 0000:01:00.0: enabling device (0000 -> 0002)
1935<4>[ 62.152651 / 01-03 15:39:09.679][2] DHD: dongle ram size is set to 786432(orig 786432) at 0x180000
1936<3>[ 62.152659 / 01-03 15:39:09.679][2] request DHD_INFO size(25600) is bigger than static size(24576).
1937<4>[ 62.152663 / 01-03 15:39:09.679][2] wifi_platform_prealloc: failed to alloc static mem section 7
1938<4>[ 62.152671 / 01-03 15:39:09.679][2] wifi_platform_get_mac_addr
1939<6>[ 62.152679 / 01-03 15:39:09.679][2] [bcm_wifi_get_mac_addr] Exiting. MyMac : 0 : 90 : 4c : d6 : b3 :f9
1940<6>[ 62.152749 / 01-03 15:39:09.679][2] CFG80211-INFO2) wl_setup_wiphy : Registering Vendor80211
1941<4>[ 62.153015 / 01-03 15:39:09.679][3] wl_create_event_handler(): thread:wl_event_handler:194 started
1942<6>[ 62.153022 / 01-03 15:39:09.679][2] CFG80211-INFO2) wl_event_handler : tsk Enter, tsk = 0xffffffc040d54cf0
1943<4>[ 62.153169 / 01-03 15:39:09.679][3] dhd_attach(): thread:dhd_watchdog_thread:195 started
1944<4>[ 62.153224 / 01-03 15:39:09.679][3] dhd_attach(): thread:dhd_rpm_state_thread:196 started
1945<4>[ 62.153234 / 01-03 15:39:09.679][3] dhd_deferred_work_init: work queue initialized
1946<4>[ 62.153242 / 01-03 15:39:09.679][3] DHD LOAD BALANCING Enabled
1947<4>[ 62.153696 / 01-03 15:39:09.679][3] Dongle Host Driver, version 1.78.5 (r)
1948<4>[ 62.153696 / 01-03 15:39:09.679][3] Compiled in drivers/net/wireless/bcmdhd on 3.18.31-twrp-h918-1.0
1949<4>[ 62.153948 / 01-03 15:39:09.679][3] Register interface [wlan0] MAC: 00:90:4c:0d:c4:19
1950<4>[ 62.153948 / 01-03 15:39:09.679][3]
1951<6>[ 62.153970 / 01-03 15:39:09.679][2] CFG80211-INFO2) wl_event_handler : was terminated
1952<4>[ 62.153989 / 01-03 15:39:09.679][3] wl_destroy_event_handler(): thread:wl_event_handler:194 terminated OK
1953<4>[ 62.153997 / 01-03 15:39:09.679][3] dhd_wl_ioctl: returning as busstate=0
1954<4>[ 62.154003 / 01-03 15:39:09.679][3] dhd_bus_devreset: == Power OFF ==
1955<4>[ 62.154015 / 01-03 15:39:09.679][3] dhdpcie_oob_intr_unregister: irq is not registered
1956<6>[ 62.164488 / 01-03 15:39:09.689][3] msm_pcie_disable: PCIe: Assert the reset of endpoint of RC0.
1957<4>[ 62.165594 / 01-03 15:39:09.689][3] dhd_bus_devreset: WLAN OFF Done
1958<4>[ 62.165601 / 01-03 15:39:09.689][3] wifi_platform_set_power = 0
1959<4>[ 62.165633 / 01-03 15:39:09.689][3] [BRCM]: gpio_direction_output(1011,0)! ret = 0
1960<3>[ 62.165638 / 01-03 15:39:09.689][3] bcm_wifi_set_power: wifi power successed to pull down
1961<0>[ 62.165675 / 01-03 15:39:09.689][3] drv probe : 62000 bcmdhd_wlan 164
1962<4>[ 62.165764 / 01-03 15:39:09.689][3] dhd_module_init out
1963<6>[ 62.169085 / 01-03 15:39:09.689][3] clock_late_init: Removing enables held for handed-off clocks
1964<6>[ 62.173444 / 01-03 15:39:09.699][3] ALSA device list:
1965<6>[ 62.173452 / 01-03 15:39:09.699][3] No soundcards found.
1966<6>[ 62.173843 / 01-03 15:39:09.699][3] Freeing unused kernel memory: 508K (ffffffc00126a000 - ffffffc0012e9000)
1967<6>[ 62.173864 / 01-03 15:39:09.699][3] Freeing alternatives memory: 80K (ffffffc0012e9000 - ffffffc0012fd000)
1968<5>[ 62.173870 / 01-03 15:39:09.699][3] [CCAudit] Run init process for OS startup
1969<13>[ 62.174621 / 01-03 15:39:09.699][3] init: init started!
1970<7>[ 62.176167 / 01-03 15:39:09.699][3] SELinux: 2048 avtab hash slots, 4857 rules.
1971<6>[ 62.176206 / 01-03 15:39:09.699][3] SELinux: Android master kernel running Android M policy in compatibility mode.
1972<7>[ 62.176964 / 01-03 15:39:09.699][3] SELinux: 2048 avtab hash slots, 4857 rules.
1973<7>[ 62.176975 / 01-03 15:39:09.699][3] SELinux: 1 users, 2 roles, 530 types, 0 bools, 1 sens, 1024 cats
1974<7>[ 62.176982 / 01-03 15:39:09.699][3] SELinux: 87 classes, 4857 rules
1975<6>[ 62.177420 / 01-03 15:39:09.699][3] SELinux: Permission audit_read in class capability2 not defined in policy.
1976<6>[ 62.177438 / 01-03 15:39:09.699][3] SELinux: Class can_socket not defined in policy.
1977<6>[ 62.177444 / 01-03 15:39:09.699][3] SELinux: the above unknown classes and permissions will be denied
1978<7>[ 62.177460 / 01-03 15:39:09.699][3] SELinux: Completing initialization.
1979<7>[ 62.177464 / 01-03 15:39:09.699][3] SELinux: Setting up existing superblocks.
1980<7>[ 62.177475 / 01-03 15:39:09.699][3] SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
1981<7>[ 62.177490 / 01-03 15:39:09.699][3] SELinux: initialized (dev rootfs, type rootfs), uses genfs_contexts
1982<7>[ 62.177913 / 01-03 15:39:09.699][3] SELinux: initialized (dev bdev, type bdev), not configured for labeling
1983<7>[ 62.177922 / 01-03 15:39:09.699][3] SELinux: initialized (dev proc, type proc), uses genfs_contexts
1984<7>[ 62.177940 / 01-03 15:39:09.699][3] SELinux: initialized (dev debugfs, type debugfs), uses genfs_contexts
1985<7>[ 62.204392 / 01-03 15:39:09.729][3] SELinux: initialized (dev sockfs, type sockfs), uses task SIDs
1986<7>[ 62.204408 / 01-03 15:39:09.729][3] SELinux: initialized (dev pipefs, type pipefs), uses task SIDs
1987<7>[ 62.204416 / 01-03 15:39:09.729][3] SELinux: initialized (dev anon_inodefs, type anon_inodefs), not configured for labeling
1988<7>[ 62.204424 / 01-03 15:39:09.729][3] SELinux: initialized (dev aio, type aio), not configured for labeling
1989<7>[ 62.204433 / 01-03 15:39:09.729][3] SELinux: initialized (dev devpts, type devpts), uses transition SIDs
1990<7>[ 62.204454 / 01-03 15:39:09.729][3] SELinux: initialized (dev selinuxfs, type selinuxfs), uses genfs_contexts
1991<7>[ 62.204510 / 01-03 15:39:09.729][3] SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
1992<7>[ 62.204527 / 01-03 15:39:09.729][3] SELinux: initialized (dev sysfs, type sysfs), uses genfs_contexts
1993<5>[ 62.207769 / 01-03 15:39:09.729][2] audit: type=1403 audit(1451835549.729:2): policy loaded auid=4294967295 ses=4294967295
1994<13>[ 62.208085 / 01-03 15:39:09.729][2] init: (Initializing SELinux non-enforcing took 0.03s.)
1995<13>[ 62.211057 / 01-03 15:39:09.739][2] init: init second stage started!
1996<11>[ 62.211287 / 01-03 15:39:09.739][2] init: property_set("ro.boot.bootdevice", "624000.ufshc") failed
1997<11>[ 62.621598 / 01-03 15:39:10.149][2] init: waitpid failed: No child processes
1998<13>[ 62.621849 / 01-03 15:39:10.149][2] init: (Loading properties from /default.prop took 0.00s.)
1999<11>[ 62.622133 / 01-03 15:39:10.149][2] init: /init.rc: 57: invalid command 'load_all_props'
2000<11>[ 62.622191 / 01-03 15:39:10.149][2] init: could not import file '/init.recovery.logd.rc' from '/init.rc'
2001<13>[ 62.622254 / 01-03 15:39:10.149][2] init: (Parsing /init.recovery.usb.rc took 0.00s.)
2002<13>[ 62.622297 / 01-03 15:39:10.149][2] init: (Parsing /init.recovery.elsa.rc took 0.00s.)
2003<13>[ 62.622309 / 01-03 15:39:10.149][2] init: (Parsing /init.rc took 0.00s.)
2004<5>[ 62.622381 / 01-03 15:39:10.149][2] audit: type=1400 audit(1451835550.149:3): avc: denied { setcheckreqprot } for pid=1 comm="init" scontext=u:r:init:s0 tcontext=u:object_r:kernel:s0 tclass=security permissive=1
2005<5>[ 62.622431 / 01-03 15:39:10.149][2] audit: type=1400 audit(1451835550.149:4): avc: denied { setcurrent } for pid=1 comm="init" scontext=u:r:init:s0 tcontext=u:r:init:s0 tclass=process permissive=1
2006<5>[ 62.622449 / 01-03 15:39:10.149][2] audit: type=1400 audit(1451835550.149:5): avc: denied { dyntransition } for pid=1 comm="init" scontext=u:r:init:s0 tcontext=u:r:init:s0 tclass=process permissive=1
2007<13>[ 62.622484 / 01-03 15:39:10.149][2] init: Starting service 'ueventd'...
2008<13>[ 62.622653 / 01-03 15:39:10.149][2] init: Starting service 'healthd'...
2009<13>[ 62.622788 / 01-03 15:39:10.149][2] init: Waiting for /dev/.coldboot_done...
2010<13>[ 62.624102 / 01-03 15:39:10.149][3] ueventd: ueventd started!
2011<6>[ 62.902739 / 01-03 15:39:10.429][3] dwc3_msm_power_get_property_usb: POWER_SUPPLY_PROP_VOLTAGE_NOW
2012<11>[ 63.630849 / 01-03 15:39:11.159][0] init: Timed out waiting for /dev/.coldboot_done
2013<13>[ 63.630892 / 01-03 15:39:11.159][0] init: Waiting for /dev/.coldboot_done took 1.01s.
2014<7>[ 63.632163 / 01-03 15:39:11.159][0] SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
2015<6>[ 63.632497 / 01-03 15:39:11.159][0] android_usb android0: LGE-USB request function list: mtp,adb
2016<5>[ 63.632581 / 01-03 15:39:11.159][0] audit: type=1400 audit(1451835551.159:6): avc: denied { write } for pid=1 comm="init" name="lun0" dev="sysfs" ino=42964 scontext=u:r:init:s0 tcontext=u:object_r:sysfs:s0 tclass=dir permissive=1
2017<13>[ 63.632608 / 01-03 15:39:11.159][0] init: write_file: Unable to open '/sys/devices/soc/6a00000.ssusb/6a00000.dwc3/gadget/lun0/cdrom': Permission denied
2018<7>[ 63.633384 / 01-03 15:39:11.159][0] SELinux: initialized (dev pstore, type pstore), uses genfs_contexts
2019<7>[ 63.633932 / 01-03 15:39:11.159][0] SELinux: initialized (dev functionfs, type functionfs), uses genfs_contexts
2020<13>[ 63.634009 / 01-03 15:39:11.159][0] init: (Loading properties from /system/build.prop took 0.00s.)
2021<13>[ 63.634040 / 01-03 15:39:11.159][0] init: (Loading properties from /vendor/build.prop took 0.00s.)
2022<13>[ 63.634067 / 01-03 15:39:11.159][0] init: (Loading properties from /factory/factory.prop took 0.00s.)
2023<13>[ 63.639676 / 01-03 15:39:11.159][0] init: (Loading properties from /data/local.prop took 0.00s.)
2024<11>[ 63.639711 / 01-03 15:39:11.159][0] init: Unable to open persistent property directory "/data/property": No such file or directory
2025<13>[ 63.640194 / 01-03 15:39:11.169][0] init: Starting service 'set_permissive'...
2026<11>[ 63.641249 / 01-03 15:39:11.169][0] init: Warning! Service recovery needs a SELinux domain defined; please fix!
2027<13>[ 63.641270 / 01-03 15:39:11.169][0] init: Starting service 'recovery'...
2028<5>[ 63.641593 / 01-03 15:39:11.169][1] audit: type=1400 audit(1451835551.169:7): avc: denied { execute_no_trans } for pid=411 comm="init" path="/sbin/recovery" dev="rootfs" ino=14342 scontext=u:r:init:s0 tcontext=u:object_r:rootfs:s0 tclass=file permissive=1
2029<6>[ 63.642417 / 01-03 15:39:11.169][0] lge,blmap-ex: br_lvl(0) -> bl_lvl(0)
2030<6>[ 63.642533 / 01-03 15:39:11.169][0] android_usb android0: gadget enable(0)
2031<3>[ 63.642545 / 01-03 15:39:11.169][0] enable_store: android_usb: already disabled
2032<6>[ 63.643192 / 01-03 15:39:11.169][0] android_usb android0: gadget enable(0)
2033<6>[ 63.643242 / 01-03 15:39:11.169][0] android_usb android0: LGE-USB request function list: mtp,adb
2034<6>[ 63.643292 / 01-03 15:39:11.169][0] android_usb android0: gadget enable(1)
2035<6>[ 63.643305 / 01-03 15:39:11.169][0] ffs_function_enable: ffs_function_enable: config->opened(0)
2036<6>[ 63.643315 / 01-03 15:39:11.169][0] android_disable: android_disable: checked disable_depth(1)
2037<6>[ 63.643325 / 01-03 15:39:11.169][0] android_enable: android_enable: checked disable_depth(2)
2038<13>[ 63.643362 / 01-03 15:39:11.169][0] init: Starting service 'adbd'...
2039<6>[ 63.643630 / 01-03 15:39:11.169][0] android_usb android0: gadget enable(0)
2040<6>[ 63.643651 / 01-03 15:39:11.169][0] android_disable: android_disable: checked disable_depth(1)
2041<6>[ 63.643662 / 01-03 15:39:11.169][0] ffs_function_disable: ffs_function_disable: config->opened(0)
2042<6>[ 63.643671 / 01-03 15:39:11.169][0] android_enable: android_enable: checked disable_depth(2)
2043<13>[ 63.643703 / 01-03 15:39:11.169][0] init: Service 'adbd' is being killed...
2044<6>[ 63.643763 / 01-03 15:39:11.169][0] android_usb android0: gadget enable(1)
2045<6>[ 63.643774 / 01-03 15:39:11.169][0] ffs_function_enable: ffs_function_enable: config->opened(0)
2046<6>[ 63.643781 / 01-03 15:39:11.169][0] android_disable: android_disable: checked disable_depth(1)
2047<6>[ 63.643788 / 01-03 15:39:11.169][0] android_enable: android_enable: checked disable_depth(2)
2048<6>[ 63.646827 / 01-03 15:39:11.169][0] read descriptors
2049<6>[ 63.646853 / 01-03 15:39:11.169][0] read strings
2050<6>[ 63.646877 / 01-03 15:39:11.169][0] functionfs_ready_callback: functionfs_ready_callback: config->enabled(1), dev(ffffffc0f4da0800)
2051<6>[ 63.646885 / 01-03 15:39:11.169][0] android_enable: android_enable: checked disable_depth(1)
2052<6>[ 63.646894 / 01-03 15:39:11.169][0] mtp_bind_config
2053<6>[ 63.648016 / 01-03 15:39:11.169][0] dwc3_gadget_run_stop Queue DCP check work! 0
2054<5>[ 63.648396 / 01-03 15:39:11.169][3] audit: type=1400 audit(1451835551.169:8): avc: denied { write } for pid=413 comm="setenforce" name="enforce" dev="selinuxfs" ino=4 scontext=u:r:recovery:s0 tcontext=u:object_r:selinuxfs:s0 tclass=file permissive=1
2055<13>[ 63.649151 / 01-03 15:39:11.169][3] init: Service 'set_permissive' (pid 410) exited with status 0
2056<13>[ 63.653657 / 01-03 15:39:11.179][2] ueventd: Coldboot took 1.03s.
2057<6>[ 63.658688 / 01-03 15:39:11.179][3] lge,blmap: br_lvl(149) -> bl_lvl(793)
2058<6>[ 63.658703 / 01-03 15:39:11.179][3] mdss_fb_set_backlight: [AOD] Save unset_bl_level(793) in U3 mode. Will be updated when kick off function
2059<5>[ 63.658909 / 01-03 15:39:11.179][3] audit: type=1400 audit(1451835551.179:9): avc: denied { append } for pid=411 comm="recovery" path="/tmp/recovery.log" dev="tmpfs" ino=16010 scontext=u:r:init:s0 tcontext=u:object_r:init_tmpfs:s0 tclass=file permissive=1
2060<5>[ 63.658995 / 01-03 15:39:11.179][3] audit: type=1400 audit(1451835551.179:10): avc: denied { write } for pid=411 comm="recovery" name="property_service" dev="tmpfs" ino=13552 scontext=u:r:init:s0 tcontext=u:object_r:property_socket:s0 tclass=sock_file permissive=1
2061<6>[ 63.659745 / 01-03 15:39:11.179][3] lge,blmap: br_lvl(149) -> bl_lvl(793)
2062<6>[ 63.659754 / 01-03 15:39:11.179][3] mdss_fb_set_backlight: [AOD] Save unset_bl_level(793) in U3 mode. Will be updated when kick off function
2063<5>[ 63.659834 / 01-03 15:39:11.179][3] audit: type=1400 audit(1451835551.179:11): avc: denied { write } for pid=411 comm="recovery" name="fb0" dev="tmpfs" ino=13731 scontext=u:r:init:s0 tcontext=u:object_r:graphics_device:s0 tclass=chr_file permissive=1
2064<6>[ 63.659856 / 01-03 15:39:11.179][3] mdss_fb_blank_sub: [Display] mdss_fb_open+0x178/0x1c4 mode:0
2065<3>[ 63.659991 / 01-03 15:39:11.179][3] mdss_fb_blank_sub: mdss_fb_blank_sub: -
2066<6>[ 63.660081 / 01-03 15:39:11.189][3] mdss_fb_set_backlight: [AOD] Save unset_bl_level(0) in U3 mode. Will be updated when kick off function
2067<6>[ 63.660088 / 01-03 15:39:11.189][3] [AOD] Disable AOD mode when shutdown
2068<6>[ 63.660096 / 01-03 15:39:11.189][3] mdss_fb_blank_sub: [Display] mdss_fb_release_all+0x294/0x36c mode:4
2069<6>[ 63.660197 / 01-03 15:39:11.189][3] mdss_fb_set_backlight: [AOD] Save unset_bl_level(0) in U3 mode. Will be updated when kick off function
2070<3>[ 63.660218 / 01-03 15:39:11.189][3] mdss_fb_blank_sub: mdss_fb_blank_sub: -
2071<6>[ 63.660569 / 01-03 15:39:11.189][3] mdss_fb_blank_sub: [Display] mdss_fb_open+0x178/0x1c4 mode:0
2072<3>[ 63.660649 / 01-03 15:39:11.189][3] mdss_fb_blank_sub: mdss_fb_blank_sub: -
2073<6>[ 63.682715 / 01-03 15:39:11.209][3] mdss_fb_blank_sub: [Display] mdss_fb_blank+0xe0/0xe8 mode:4
2074<6>[ 63.682759 / 01-03 15:39:11.209][3] mdss_fb_set_backlight: [AOD] Save unset_bl_level(0) in U3 mode. Will be updated when kick off function
2075<3>[ 63.682785 / 01-03 15:39:11.209][2] mdss_fb_blank_sub: mdss_fb_blank_sub: -
2076<6>[ 63.682788 / 01-03 15:39:11.209][2] [Touch] FB_BLANK
2077<6>[ 63.682816 / 01-03 15:39:11.209][2] mdss_fb_blank_sub: [Display] mdss_fb_blank+0xe0/0xe8 mode:0
2078<3>[ 63.682902 / 01-03 15:39:11.209][2] mdss_fb_blank_sub: mdss_fb_blank_sub: -
2079<6>[ 63.682905 / 01-03 15:39:11.209][2] [Touch] FB_UNBLANK
2080<3>[ 63.693768 / 01-03 15:39:11.219][3] [Display] mdss_dsi_on+: ctrl=ffffffc075a1a018 ndx=0 cur_power_state=1
2081<3>[ 63.693772 / 01-03 15:39:11.219][3] [Display] mdss_dsi_on-:
2082<3>[ 63.693780 / 01-03 15:39:11.219][3] [Display] mdss_dsi_unblank+: ctrl=ffffffc075a1a018 ndx=0 cur_power_state=1 ctrl_state=7
2083<3>[ 63.694508 / 01-03 15:39:11.219][3] [Display] mdss_dsi_unblank-:
2084<6>[ 63.718937 / 01-03 15:39:11.239][2] mdss_fb_blank_sub: [Display] mdss_fb_blank+0xe0/0xe8 mode:4
2085<6>[ 63.718940 / 01-03 15:39:11.239][2] [AOD][START]cur_mode : 3, blank mode : 4, aod_node : 0, keep_aod : 3
2086<6>[ 63.718942 / 01-03 15:39:11.239][2] [AOD][END] cmd_status : 4, next_mode : 0 labibb_ctrl : ctrl
2087<6>[ 63.719455 / 01-03 15:39:11.239][2] [LCD][LM3697] lm3697_set_main_current_level : backlight level=0, cal_value=0
2088<6>[ 63.730051 / 01-03 15:39:11.259][0] lm3697_backlight_off
2089<3>[ 63.753089 / 01-03 15:39:11.279][0] [Display] mdss_dsi_blank+: ctrl=ffffffc075a1a018 ndx=0 power_state=0
2090<3>[ 63.755286 / 01-03 15:39:11.279][0] [Display] mdss_dsi_panel_off: ctrl=ffffffc075a1a018 ndx=0
2091<6>[ 63.840237 / 01-03 15:39:11.369][2] determine_lge_charging_state : states_change[0], next_state[0], pseudo_chg_ui[0]
2092<3>[ 63.840259 / 01-03 15:39:11.369][2] LGE charging scenario : state 0 -> 0(0-0), temp=25, volt=4316, BTM=0, charger=1, cur_set=0/0, chg_cur = 288
2093<6>[ 63.840271 / 01-03 15:39:11.369][2] [LGE-CC] lge_monitor_batt_temp_work : otp_ibat_current=0
2094<6>[ 63.840320 / 01-03 15:39:11.369][2] [LGE-CC] lge_monitor_batt_temp_work : Reported Capacity : 100 / voltage : 4316
2095<6>[ 63.840337 / 01-03 15:39:11.369][2] lge_power_changed_work
2096<6>[ 63.840383 / 01-03 15:39:11.369][2] SMBCHG: smbchg_external_lge_power_changed: [LGE-CC] fcc 3100, otp set 3100
2097<6>[ 63.840393 / 01-03 15:39:11.369][2] SMBCHG: lgcc_set_ibat_current: chg_current[3100]
2098<3>[ 63.840406 / 01-03 15:39:11.369][2] vote: name[SMBCHG: fcc], client_id[5], state[1], val[3100]
2099<7>[ 63.840413 / 01-03 15:39:11.369][2] SMBCHG: fcc: votes unchanged; skipping
2100<3>[ 63.840426 / 01-03 15:39:11.369][2] vote: name[SMBCHG: battchg_suspend], client_id[2], state[0], val[0]
2101<7>[ 63.840433 / 01-03 15:39:11.369][2] SMBCHG: battchg_suspend: votes unchanged; skipping
2102<6>[ 63.845932 / 01-03 15:39:11.369][0] [Touch] LCD_EVENT_LCD_MODE!
2103<6>[ 63.845944 / 01-03 15:39:11.369][0] [Touch] lcd_mode: 0 (prev: 3)
2104<6>[ 63.845951 / 01-03 15:39:11.369][0] [Touch] U0 mode change
2105<6>[ 63.845959 / 01-03 15:39:11.369][0] [Touch] touch_suspend Start
2106<6>[ 63.845977 / 01-03 15:39:11.369][0] [Touch] sw49407_suspend : touch_suspend start
2107<6>[ 63.845983 / 01-03 15:39:11.369][0] [Touch] Skip lpwg_mode
2108<6>[ 63.847234 / 01-03 15:39:11.369][0] [Touch] touch_suspend End
2109<3>[ 63.847244 / 01-03 15:39:11.369][0] [Display] mdss_dsi_panel_off:-
2110<3>[ 63.847602 / 01-03 15:39:11.369][0] [Display] mdss_dsi_blank-:End
2111<3>[ 63.847618 / 01-03 15:39:11.369][0] [Display] mdss_dsi_off+: ctrl=ffffffc075a1a018 ndx=0 power_state=0
2112<3>[ 63.848534 / 01-03 15:39:11.369][0] [Display] mdss_dsi_panel_power_ctrl: cur_power_state=1 req_power_state=0
2113<3>[ 63.849224 / 01-03 15:39:11.369][0] [Display] mdss_dsi_off-:
2114<3>[ 63.854218 / 01-03 15:39:11.379][2] mdss_fb_blank_sub: mdss_fb_blank_sub: -
2115<6>[ 63.854241 / 01-03 15:39:11.379][2] [Touch] FB_BLANK
2116<3>[ 63.854349 / 01-03 15:39:11.379][3] hdmi_tx_event_handler: event = MDSS_EVENT_SUSPEND suspend=0, hpd_feature=0
2117<6>[ 63.855024 / 01-03 15:39:11.379][2] mdss_fb_blank_sub: [Display] mdss_fb_blank+0xe0/0xe8 mode:0
2118<6>[ 63.855042 / 01-03 15:39:11.379][2] [AOD][START]cur_mode : 0, blank mode : 0, aod_node : 0, keep_aod : 3
2119<6>[ 63.855053 / 01-03 15:39:11.379][2] [AOD][END] cmd_status : 0, next_mode : 3 labibb_ctrl : ctrl
2120<3>[ 63.855435 / 01-03 15:39:11.379][0] hdmi_tx_event_handler: event = MDSS_EVENT_RESUME suspend=0, hpd_feature=0
2121<3>[ 63.860811 / 01-03 15:39:11.389][2] [Display] mdss_dsi_on+: ctrl=ffffffc075a1a018 ndx=0 cur_power_state=0
2122<3>[ 63.860824 / 01-03 15:39:11.389][2] [Display] mdss_dsi_panel_power_ctrl: cur_power_state=0 req_power_state=1
2123<6>[ 63.867812 / 01-03 15:39:11.389][0] [Touch] NOTIFY_TOUCH_RESET! return = 0
2124<6>[ 63.868311 / 01-03 15:39:11.389][0] [Touch] ext_watch_get_current_time : Display[12:01:02], RTC[12:01:02]
2125<3>[ 63.898949 / 01-03 15:39:11.419][0] [Display] mdss_dsi_on-:
2126<3>[ 63.898982 / 01-03 15:39:11.419][0] [Display] mdss_dsi_unblank+: ctrl=ffffffc075a1a018 ndx=0 cur_power_state=1 ctrl_state=4
2127<6>[ 63.899782 / 01-03 15:39:11.419][0] msm-dwc3 6a00000.ssusb: DWC3_CONTROLLER_CONNDONE_EVENT received
2128<3>[ 63.900955 / 01-03 15:39:11.429][0] [Display] mdss_dsi_panel_on: ndx=0
2129<6>[ 63.910013 / 01-03 15:39:11.429][0] [Display]lge_change_reader_mode: reader_mode_step4 or off
2130<6>[ 63.911681 / 01-03 15:39:11.439][1] [Display]lge_change_reader_mode: image enhance on
2131<6>[ 63.983288 / 01-03 15:39:11.509][0] android_work: android_work: sent uevent USB_STATE=CONNECTED
2132<6>[ 64.013427 / 01-03 15:39:11.539][0] [Touch] LCD_EVENT_LCD_MODE!
2133<6>[ 64.013437 / 01-03 15:39:11.539][0] [Touch] lcd_mode: 3 (prev: 0)
2134<6>[ 64.013446 / 01-03 15:39:11.539][0] [Touch] touch_resume Start
2135<6>[ 64.013454 / 01-03 15:39:11.539][0] [Touch] touch_resume End
2136<3>[ 64.013498 / 01-03 15:39:11.539][0] [Display] mdss_dsi_panel_on:-
2137<6>[ 64.013524 / 01-03 15:39:11.539][1] [Touch] touch_ic_init Start
2138<6>[ 64.013538 / 01-03 15:39:11.539][1] [Touch] sw49407_init: charger_state = 0x01
2139<6>[ 64.013745 / 01-03 15:39:11.539][1] [Touch] info ptr addr read : 0026425C
2140<6>[ 64.013903 / 01-03 15:39:11.539][1] [Touch] tc status read : 0F7000C0
2141<6>[ 64.013911 / 01-03 15:39:11.539][1] [Touch] ========== Info ADDR ==========
2142<6>[ 64.013918 / 01-03 15:39:11.539][1] [Touch] chip_info_addr : 025C
2143<6>[ 64.013925 / 01-03 15:39:11.539][1] [Touch] reg_info_addr : 0264
2144<6>[ 64.013931 / 01-03 15:39:11.539][1] [Touch] ========== Info ADDR ==========
2145<6>[ 64.013936 / 01-03 15:39:11.539][1] [Touch] Model ID is loaded
2146<6>[ 64.013943 / 01-03 15:39:11.539][1] [Touch] Production Test info checksum is ok
2147<3>[ 64.014364 / 01-03 15:39:11.539][0] [Display] mdss_dsi_unblank-:
2148<6>[ 64.015065 / 01-03 15:39:11.539][1] [Touch] ==Print PT info Data==
2149<6>[ 64.015089 / 01-03 15:39:11.539][1] [Touch] version : v1.07, chip : 9, protocol : 4
2150<6>[ 64.015089 / 01-03 15:39:11.539][1] [Touch]
2151<6>[ 64.015089 / 01-03 15:39:11.539][1] [Touch] fpc : 2, lcm : 4, lot : 9
2152<6>[ 64.015089 / 01-03 15:39:11.539][1] [Touch] product id : L1L57P1
2153<6>[ 64.015089 / 01-03 15:39:11.539][1] [Touch] flash boot : idle, done, crc : ok
2154<6>[ 64.015095 / 01-03 15:39:11.539][1] [Touch] ==Print Config Header Data==
2155<6>[ 64.015105 / 01-03 15:39:11.539][1] [Touch] Chip Rev : 0, Model_ID : 1, lcm_id : 4, fpcb_id : 2, lot_id : 3
2156<6>[ 64.015958 / 01-03 15:39:11.539][1] [Touch] resume ts->lpwg.screen on
2157<6>[ 64.016112 / 01-03 15:39:11.539][1] [Touch] sw49407_lpwg_control mode = 0
2158<6>[ 64.016260 / 01-03 15:39:11.539][1] [Touch] swipe disable
2159<6>[ 64.016270 / 01-03 15:39:11.539][1] [Touch] sw49407_tc_driving = 3, 185
2160<6>[ 64.016421 / 01-03 15:39:11.539][1] [Touch] DDI Display Mode = 3
2161<6>[ 64.016708 / 01-03 15:39:11.539][1] [Touch] Reset Cnt : 20
2162<6>[ 64.016725 / 01-03 15:39:11.539][0] android_usb gadget: high-speed config #1: 66bf0c8.android_usb
2163<6>[ 64.016949 / 01-03 15:39:11.539][0] msm-dwc3 6a00000.ssusb: Avail curr from USB = 500
2164<6>[ 64.017403 / 01-03 15:39:11.539][0] dwc3_msm_power_get_property_usb: POWER_SUPPLY_PROP_VOLTAGE_NOW
2165<3>[ 64.019300 / 01-03 15:39:11.539][0] mdss_fb_blank_sub: mdss_fb_blank_sub: -
2166<6>[ 64.019319 / 01-03 15:39:11.539][0] [Touch] FB_UNBLANK
2167<3>[ 64.020557 / 01-03 15:39:11.549][0] vote: name[SMBCHG: battchg_suspend], client_id[1], state[0], val[0]
2168<7>[ 64.020565 / 01-03 15:39:11.549][0] SMBCHG: battchg_suspend: votes unchanged; skipping
2169<3>[ 64.020609 / 01-03 15:39:11.549][0] SMBCHG: smbchg_config_chg_battery_type: BATTERY FULL NAME : LGE_BL44E1F_LGC_3200mAh
2170<3>[ 64.020669 / 01-03 15:39:11.549][0] vote: name[SMBCHG: usb_icl], client_id[0], state[1], val[500]
2171<7>[ 64.020679 / 01-03 15:39:11.549][0] SMBCHG: usb_icl: 0 voting for 500 - on
2172<7>[ 64.020689 / 01-03 15:39:11.549][0] SMBCHG: usb_icl: vote_min min_vote=500, client_index=0
2173<7>[ 64.020698 / 01-03 15:39:11.549][0] SMBCHG: usb_icl: effective vote is now 500 voted by 0
2174<6>[ 64.020707 / 01-03 15:39:11.549][0] SMBCHG: smbchg_set_usb_current_max: USB current_ma = 500
2175<3>[ 64.020717 / 01-03 15:39:11.549][0] vote: name[SMBCHG: usb_suspend], client_id[2], state[0], val[0]
2176<7>[ 64.020725 / 01-03 15:39:11.549][0] SMBCHG: usb_suspend: 2 voting for 0 - off
2177<6>[ 64.020894 / 01-03 15:39:11.549][2] SMBCHG: power_ok_handler: triggered: 0x01
2178<6>[ 64.020932 / 01-03 15:39:11.549][0] SMBCHG: smbchg_set_usb_current_max: usb type = 4 current set to 500 mA
2179<6>[ 64.020961 / 01-03 15:39:11.549][0] SMBCHG: smbchg_stay_awake: staying awake: 0x01 (bit 1)
2180<6>[ 64.020984 / 01-03 15:39:11.549][0] SMBCHG: smbchg_vfloat_adjust_check: Starting vfloat adjustments
2181<6>[ 64.021101 / 01-03 15:39:11.549][0] dwc3_msm_power_get_property_usb: POWER_SUPPLY_PROP_VOLTAGE_NOW
2182<6>[ 64.021105 / 01-03 15:39:11.549][2] lge,blmap: br_lvl(149) -> bl_lvl(793)
2183<6>[ 64.021109 / 01-03 15:39:11.549][2] mdss_fb_set_backlight: [AOD] Save unset_bl_level(793) in U3 mode. Will be updated when kick off function
2184<6>[ 64.040411 / 01-03 15:39:11.569][3] [Touch] sw49407_te_info : 546, 16.66 ms, 60.00 hz
2185<6>[ 64.040440 / 01-03 15:39:11.569][3] [Touch] touch_ic_init End
2186<6>[ 64.070285 / 01-03 15:39:11.599][0] android_work: android_work: sent uevent USB_STATE=CONFIGURED
2187<6>[ 64.073708 / 01-03 15:39:11.599][2] mdss_fb_update_backlight: [Display] backlight sent to panel :793 in mdss_fb_update_backlight
2188<6>[ 64.075905 / 01-03 15:39:11.599][2] qpnp_wled_module_en : wled module enable
2189<6>[ 64.092317 / 01-03 15:39:11.619][3] EXT4-fs (sda20): mounted filesystem with ordered data mode. Opts:
2190<7>[ 64.092341 / 01-03 15:39:11.619][3] SELinux: initialized (dev sda20, type ext4), uses xattr
2191<6>[ 64.092635 / 01-03 15:39:11.619][2] [Touch] TC_Driving OK
2192<6>[ 64.115559 / 01-03 15:39:11.639][3] EXT4-fs (sda20): mounted filesystem with ordered data mode. Opts:
2193<7>[ 64.115583 / 01-03 15:39:11.639][3] SELinux: initialized (dev sda20, type ext4), uses xattr
2194<6>[ 64.125528 / 01-03 15:39:11.649][2] SMBCHG: fastchg_handler: p2f triggered
2195<6>[ 64.125564 / 01-03 15:39:11.649][2] SMBCHG: smbchg_vfloat_adjust_check: Starting vfloat adjustments
2196<6>[ 64.136658 / 01-03 15:39:11.659][2] FG: update_sram_data: soc:[100], soc_raw[9819], voltage:[4255651], ocv:[4346440], current:[751490], batt_temp:[246], charge_raw [3108709 / 3167000]
2197<6>[ 64.140540 / 01-03 15:39:11.669][3] EXT4-fs (sda20): mounted filesystem with ordered data mode. Opts:
2198<7>[ 64.140562 / 01-03 15:39:11.669][3] SELinux: initialized (dev sda20, type ext4), uses xattr
2199<6>[ 64.173693 / 01-03 15:39:11.699][0] EXT4-fs (sda20): mounted filesystem with ordered data mode. Opts:
2200<7>[ 64.173796 / 01-03 15:39:11.699][0] SELinux: initialized (dev sda20, type ext4), uses xattr
2201<6>[ 64.216013 / 01-03 15:39:11.739][0] EXT4-fs (sda19): mounted filesystem with ordered data mode. Opts:
2202<7>[ 64.216093 / 01-03 15:39:11.739][0] SELinux: initialized (dev sda19, type ext4), uses xattr
2203<6>[ 64.217171 / 01-03 15:39:11.739][0] SELinux: Context u:object_r:cache_recovery_file:s0 is not valid (left unmapped).
2204<6>[ 64.260380 / 01-03 15:39:11.789][2] SMBCHG: usbin_uv_handler: chip->usb_present = 1 rt_sts = 0x05 hvdcp_3_det_ignore_uv = 0 aicl = 1700
2205<6>[ 64.260395 / 01-03 15:39:11.789][3] SMBCHG: power_ok_handler: triggered: 0x00
2206<6>[ 64.262126 / 01-03 15:39:11.789][2] SMBCHG: usbin_uv_handler: Very weak charger detected. VBUS[4884]
2207<6>[ 64.262194 / 01-03 15:39:11.789][2] SMBCHG: usbin_uv_handler: could not get current_max mode, rc=-22
2208<6>[ 64.262265 / 01-03 15:39:11.789][2] SMBCHG: usbin_uv_handler: usb_type[SDP], current_max_mode[0]
2209<3>[ 64.262303 / 01-03 15:39:11.789][2] SMBCHG: usbin_uv_handler: could not disable charger: -22
2210<6>[ 64.262432 / 01-03 15:39:11.789][2] dwc3_msm_power_get_property_usb: POWER_SUPPLY_PROP_VOLTAGE_NOW
2211<3>[ 64.265413 / 01-03 15:39:11.789][2] vote: name[SMBCHG: battchg_suspend], client_id[1], state[0], val[0]
2212<7>[ 64.265458 / 01-03 15:39:11.789][2] SMBCHG: battchg_suspend: votes unchanged; skipping
2213<3>[ 64.265528 / 01-03 15:39:11.789][2] SMBCHG: smbchg_config_chg_battery_type: BATTERY FULL NAME : LGE_BL44E1F_LGC_3200mAh
2214<3>[ 64.265626 / 01-03 15:39:11.789][2] vote: name[SMBCHG: usb_icl], client_id[0], state[1], val[500]
2215<7>[ 64.265662 / 01-03 15:39:11.789][2] SMBCHG: usb_icl: votes unchanged; skipping
2216<6>[ 64.265698 / 01-03 15:39:11.789][2] SMBCHG: smbchg_vfloat_adjust_check: Starting vfloat adjustments
2217<6>[ 64.265853 / 01-03 15:39:11.789][2] dwc3_msm_power_get_property_usb: POWER_SUPPLY_PROP_VOLTAGE_NOW
2218<6>[ 64.280581 / 01-03 15:39:11.809][2] SMBCHG: usbin_uv_handler: chip->usb_present = 1 rt_sts = 0x04 hvdcp_3_det_ignore_uv = 0 aicl = 1700
2219<6>[ 64.280620 / 01-03 15:39:11.809][3] SMBCHG: power_ok_handler: triggered: 0x01
2220<6>[ 64.381608 / 01-03 15:39:11.909][2] SMBCHG: usbin_uv_handler: chip->usb_present = 1 rt_sts = 0x05 hvdcp_3_det_ignore_uv = 0 aicl = 1700
2221<6>[ 64.381646 / 01-03 15:39:11.909][3] SMBCHG: power_ok_handler: triggered: 0x00
2222<6>[ 64.383171 / 01-03 15:39:11.909][2] SMBCHG: usbin_uv_handler: Very weak charger detected. VBUS[4894]
2223<6>[ 64.383231 / 01-03 15:39:11.909][2] SMBCHG: usbin_uv_handler: could not get current_max mode, rc=-22
2224<6>[ 64.383298 / 01-03 15:39:11.909][2] SMBCHG: usbin_uv_handler: usb_type[SDP], current_max_mode[0]
2225<3>[ 64.383330 / 01-03 15:39:11.909][2] SMBCHG: usbin_uv_handler: could not disable charger: -22
2226<6>[ 64.383439 / 01-03 15:39:11.909][2] dwc3_msm_power_get_property_usb: POWER_SUPPLY_PROP_VOLTAGE_NOW
2227<3>[ 64.386369 / 01-03 15:39:11.909][2] vote: name[SMBCHG: battchg_suspend], client_id[1], state[0], val[0]
2228<7>[ 64.386409 / 01-03 15:39:11.909][2] SMBCHG: battchg_suspend: votes unchanged; skipping
2229<3>[ 64.386469 / 01-03 15:39:11.909][2] SMBCHG: smbchg_config_chg_battery_type: BATTERY FULL NAME : LGE_BL44E1F_LGC_3200mAh
2230<3>[ 64.386560 / 01-03 15:39:11.909][2] vote: name[SMBCHG: usb_icl], client_id[0], state[1], val[500]
2231<7>[ 64.386593 / 01-03 15:39:11.909][2] SMBCHG: usb_icl: votes unchanged; skipping
2232<6>[ 64.386624 / 01-03 15:39:11.909][2] SMBCHG: smbchg_vfloat_adjust_check: Starting vfloat adjustments
2233<6>[ 64.401825 / 01-03 15:39:11.929][2] SMBCHG: usbin_uv_handler: chip->usb_present = 1 rt_sts = 0x04 hvdcp_3_det_ignore_uv = 0 aicl = 1700
2234<6>[ 64.401859 / 01-03 15:39:11.929][3] SMBCHG: power_ok_handler: triggered: 0x01
2235<6>[ 64.523070 / 01-03 15:39:12.049][2] SMBCHG: usbin_uv_handler: chip->usb_present = 1 rt_sts = 0x05 hvdcp_3_det_ignore_uv = 0 aicl = 1700
2236<6>[ 64.523103 / 01-03 15:39:12.049][3] SMBCHG: power_ok_handler: triggered: 0x00
2237<6>[ 64.524631 / 01-03 15:39:12.049][2] SMBCHG: usbin_uv_handler: Very weak charger detected. VBUS[4867]
2238<6>[ 64.524691 / 01-03 15:39:12.049][2] SMBCHG: usbin_uv_handler: could not get current_max mode, rc=-22
2239<6>[ 64.524756 / 01-03 15:39:12.049][2] SMBCHG: usbin_uv_handler: usb_type[SDP], current_max_mode[0]
2240<3>[ 64.524788 / 01-03 15:39:12.049][2] SMBCHG: usbin_uv_handler: could not disable charger: -22
2241<6>[ 64.524891 / 01-03 15:39:12.049][2] dwc3_msm_power_get_property_usb: POWER_SUPPLY_PROP_VOLTAGE_NOW
2242<3>[ 64.527806 / 01-03 15:39:12.049][2] vote: name[SMBCHG: battchg_suspend], client_id[1], state[0], val[0]
2243<7>[ 64.527845 / 01-03 15:39:12.049][2] SMBCHG: battchg_suspend: votes unchanged; skipping
2244<3>[ 64.527898 / 01-03 15:39:12.049][2] SMBCHG: smbchg_config_chg_battery_type: BATTERY FULL NAME : LGE_BL44E1F_LGC_3200mAh
2245<3>[ 64.527985 / 01-03 15:39:12.049][2] vote: name[SMBCHG: usb_icl], client_id[0], state[1], val[500]
2246<7>[ 64.528017 / 01-03 15:39:12.049][2] SMBCHG: usb_icl: votes unchanged; skipping
2247<6>[ 64.528047 / 01-03 15:39:12.049][2] SMBCHG: smbchg_vfloat_adjust_check: Starting vfloat adjustments
2248<6>[ 64.530223 / 01-03 15:39:12.059][0] SMBCHG: smbchg_parallel_usb_en_work: AICL at 1700
2249<6>[ 64.530318 / 01-03 15:39:12.059][0] SMBCHG: smbchg_is_parallel_usb_ok: SDP adapter, skipping
2250<6>[ 64.530363 / 01-03 15:39:12.059][0] SMBCHG: smbchg_relax: relaxing: 0x00 (bit 1)
2251<6>[ 64.543286 / 01-03 15:39:12.069][2] SMBCHG: usbin_uv_handler: chip->usb_present = 1 rt_sts = 0x04 hvdcp_3_det_ignore_uv = 0 aicl = 1700
2252<6>[ 64.543320 / 01-03 15:39:12.069][3] SMBCHG: power_ok_handler: triggered: 0x01
2253<6>[ 64.569157 / 01-03 15:39:12.089][1] EXT4-fs (sda18): mounted filesystem with ordered data mode. Opts:
2254<7>[ 64.569265 / 01-03 15:39:12.089][1] SELinux: initialized (dev sda18, type ext4), uses xattr
2255<6>[ 64.583010 / 01-03 15:39:12.109][2] SELinux: Context u:object_r:vpnclientd_data_file:s0 is not valid (left unmapped).
2256<6>[ 64.605267 / 01-03 15:39:12.129][2] SELinux: Context u:object_r:audioserver_data_file:s0 is not valid (left unmapped).
2257<6>[ 64.605878 / 01-03 15:39:12.129][2] SELinux: Context u:object_r:boottrace_data_file:s0 is not valid (left unmapped).
2258<6>[ 64.606148 / 01-03 15:39:12.129][2] SELinux: Context u:object_r:update_engine_data_file:s0 is not valid (left unmapped).
2259<6>[ 64.606530 / 01-03 15:39:12.129][2] SELinux: Context u:object_r:method_trace_data_file:s0 is not valid (left unmapped).
2260<6>[ 64.607266 / 01-03 15:39:12.129][2] SELinux: Context u:object_r:user_profile_data_file:s0 is not valid (left unmapped).
2261<6>[ 64.952334 / 01-03 15:39:12.479][2] SELinux: Context u:object_r:profman_dump_data_file:s0 is not valid (left unmapped).
2262<6>[ 64.952524 / 01-03 15:39:12.479][2] SELinux: Context u:object_r:qfp-daemon_data_file:s0 is not valid (left unmapped).
2263<6>[ 64.952807 / 01-03 15:39:12.479][2] SELinux: Context u:object_r:data_qsee_file:s0 is not valid (left unmapped).
2264<6>[ 64.953021 / 01-03 15:39:12.479][2] SELinux: Context u:object_r:ipacm_data_file:s0 is not valid (left unmapped).
2265<6>[ 64.953150 / 01-03 15:39:12.479][2] SELinux: Context u:object_r:wide_dhcpv6_data_file:s0 is not valid (left unmapped).
2266<6>[ 64.953228 / 01-03 15:39:12.479][2] SELinux: Context u:object_r:port_bridge_data_file:s0 is not valid (left unmapped).
2267<6>[ 64.953355 / 01-03 15:39:12.479][2] SELinux: Context u:object_r:data_test_data_file:s0 is not valid (left unmapped).
2268<6>[ 64.953735 / 01-03 15:39:12.479][2] SELinux: Context u:object_r:display_misc_file:s0 is not valid (left unmapped).
2269<6>[ 64.953789 / 01-03 15:39:12.479][2] SELinux: Context u:object_r:location_data_file:s0 is not valid (left unmapped).
2270<6>[ 64.953875 / 01-03 15:39:12.479][2] SELinux: Context u:object_r:location_socket:s0 is not valid (left unmapped).
2271<6>[ 64.954963 / 01-03 15:39:12.479][2] SELinux: Context u:object_r:fm_data_file:s0 is not valid (left unmapped).
2272<6>[ 64.955030 / 01-03 15:39:12.479][2] SELinux: Context u:object_r:RIDL_data_file:s0 is not valid (left unmapped).
2273<6>[ 64.955253 / 01-03 15:39:12.479][2] SELinux: Context u:object_r:RIDL_socket:s0 is not valid (left unmapped).
2274<6>[ 64.955315 / 01-03 15:39:12.479][2] SELinux: Context u:object_r:iop_data_file:s0 is not valid (left unmapped).
2275<6>[ 64.955368 / 01-03 15:39:12.479][2] SELinux: Context u:object_r:qti_logkit_priv_data_file:s0 is not valid (left unmapped).
2276<6>[ 64.955459 / 01-03 15:39:12.479][2] SELinux: Context u:object_r:qti_logkit_pub_data_file:s0 is not valid (left unmapped).
2277<6>[ 64.955514 / 01-03 15:39:12.479][2] SELinux: Context u:object_r:qti_logkit_priv_socket:s0 is not valid (left unmapped).
2278<6>[ 64.955569 / 01-03 15:39:12.479][2] SELinux: Context u:object_r:qti_logkit_pub_socket:s0 is not valid (left unmapped).
2279<6>[ 64.955666 / 01-03 15:39:12.479][2] SELinux: Context u:object_r:dts_data_file:s0 is not valid (left unmapped).
2280<6>[ 64.955717 / 01-03 15:39:12.479][2] SELinux: Context u:object_r:seemp_file:s0 is not valid (left unmapped).
2281<6>[ 64.955771 / 01-03 15:39:12.479][2] SELinux: Context u:object_r:tlocd_data_file:s0 is not valid (left unmapped).
2282<6>[ 64.955822 / 01-03 15:39:12.479][2] SELinux: Context u:object_r:qvop_data_file:s0 is not valid (left unmapped).
2283<6>[ 64.955874 / 01-03 15:39:12.479][2] SELinux: Context u:object_r:qvrd_data_file:s0 is not valid (left unmapped).
2284<6>[ 64.955930 / 01-03 15:39:12.479][2] SELinux: Context u:object_r:audio_pp_data_file:s0 is not valid (left unmapped).
2285<6>[ 64.955983 / 01-03 15:39:12.479][2] SELinux: Context u:object_r:vrperfd_data_file:s0 is not valid (left unmapped).
2286<6>[ 64.956075 / 01-03 15:39:12.479][2] SELinux: Context u:object_r:setkey_data_file:s0 is not valid (left unmapped).
2287<6>[ 64.956150 / 01-03 15:39:12.479][2] SELinux: Context u:object_r:bootstat_data_file:s0 is not valid (left unmapped).
2288<6>[ 65.040335 / 01-03 15:39:12.569][0] SMBCHG: smbchg_parallel_usb_en_work: AICL at 1700
2289<6>[ 65.040407 / 01-03 15:39:12.569][0] SMBCHG: smbchg_is_parallel_usb_ok: SDP adapter, skipping
2290<6>[ 65.064708 / 01-03 15:39:12.589][2] SELinux: Context u:object_r:qsee_svc_app_data_file:s0 is not valid (left unmapped).
2291<6>[ 65.337824 / 01-03 15:39:12.859][2] SELinux: Context u:object_r:location_app_data_file:s0 is not valid (left unmapped).
2292<6>[ 66.059894 / 01-03 15:39:13.579][2] SELinux: Context u:object_r:ota_data_file:s0 is not valid (left unmapped).
2293<6>[ 66.070195 / 01-03 15:39:13.599][2] SELinux: Context u:object_r:icon_file:s0 is not valid (left unmapped).
2294<6>[ 66.070317 / 01-03 15:39:13.599][2] SELinux: Context u:object_r:mpctl_data_file:s0 is not valid (left unmapped).
2295<6>[ 66.070459 / 01-03 15:39:13.599][2] SELinux: Context u:object_r:swap_data_file:s0 is not valid (left unmapped).
2296<6>[ 66.070560 / 01-03 15:39:13.599][2] SELinux: Context u:object_r:pkm_data_file:s0 is not valid (left unmapped).
2297<6>[ 66.070860 / 01-03 15:39:13.599][2] SELinux: Context u:object_r:lgmdm_system_data_file:s0 is not valid (left unmapped).
2298<6>[ 66.071135 / 01-03 15:39:13.599][2] SELinux: Context u:object_r:lgis_data_file:s0 is not valid (left unmapped).
2299<6>[ 66.071453 / 01-03 15:39:13.599][2] SELinux: Context u:object_r:hwui_precompiled_data_file:s0 is not valid (left unmapped).
2300<6>[ 66.073797 / 01-03 15:39:13.599][2] SELinux: Context u:object_r:lgmdm_data_file:s0 is not valid (left unmapped).
2301<6>[ 66.080646 / 01-03 15:39:13.609][2] SELinux: Context u:object_r:lgmdm_ir_file:s0 is not valid (left unmapped).
2302<6>[ 66.082174 / 01-03 15:39:13.609][2] SELinux: Context u:object_r:ringtone_file:s0 is not valid (left unmapped).
2303<6>[ 66.181526 / 01-03 15:39:13.709][2] SELinux: Context u:object_r:cnd_data_file:s0 is not valid (left unmapped).
2304<6>[ 66.182157 / 01-03 15:39:13.709][2] SELinux: Context u:object_r:dpmd_data_file:s0 is not valid (left unmapped).
2305<6>[ 66.183135 / 01-03 15:39:13.709][2] SELinux: Context u:object_r:shared_data_file:s0 is not valid (left unmapped).
2306<6>[ 66.183435 / 01-03 15:39:13.709][2] SELinux: Context u:object_r:fota_data_file:s0 is not valid (left unmapped).
2307<6>[ 66.184507 / 01-03 15:39:13.709][2] SELinux: Context u:object_r:time_data_file:s0 is not valid (left unmapped).
2308<6>[ 66.186992 / 01-03 15:39:13.709][2] SELinux: Context u:object_r:usf_data_file:s0 is not valid (left unmapped).
2309<6>[ 66.187535 / 01-03 15:39:13.709][2] SELinux: Context u:object_r:logger_data_file:s0 is not valid (left unmapped).
2310<6>[ 66.188502 / 01-03 15:39:13.709][2] SELinux: Context u:object_r:ccaudit_log_data_file:s0 is not valid (left unmapped).
2311<6>[ 66.189138 / 01-03 15:39:13.709][2] SELinux: Context u:object_r:ramoops_data_file:s0 is not valid (left unmapped).
2312<6>[ 66.190153 / 01-03 15:39:13.719][2] SELinux: Context u:object_r:ipsec_data_file:s0 is not valid (left unmapped).
2313<6>[ 66.190992 / 01-03 15:39:13.719][2] SELinux: Context u:object_r:fpcd_data_file:s0 is not valid (left unmapped).
2314<6>[ 66.192064 / 01-03 15:39:13.719][2] SELinux: Context u:object_r:lgvrhid_data_file:s0 is not valid (left unmapped).
2315<6>[ 66.192629 / 01-03 15:39:13.719][2] SELinux: Context u:object_r:font_data_file:s0 is not valid (left unmapped).
2316<6>[ 66.193742 / 01-03 15:39:13.719][2] SELinux: Context u:object_r:theme_data_file:s0 is not valid (left unmapped).
2317<6>[ 66.195091 / 01-03 15:39:13.719][2] SELinux: Context u:object_r:lgdrm_data_file:s0 is not valid (left unmapped).
2318<6>[ 66.252623 / 01-03 15:39:13.779][1] [EXFAT] (mmcblk0p1[179:1]): trying to mount...
2319<6>[ 66.393639 / 01-03 15:39:13.919][1] [EXFAT] (mmcblk0p1[179:1]): mounted successfully!
2320<7>[ 66.393778 / 01-03 15:39:13.919][1] SELinux: initialized (dev mmcblk0p1, type exfat), uses genfs_contexts
2321<6>[ 66.397240 / 01-03 15:39:13.919][0] [EXFAT] (mmcblk0p1[179:1]): trying to unmount...
2322<6>[ 66.397440 / 01-03 15:39:13.919][0] [EXFAT] (mmcblk0p1[179:1]): unmounted successfully!
2323<6>[ 67.460693 / 01-03 15:39:14.989][2] [EXFAT] (mmcblk0p1[179:1]): trying to mount...
2324<6>[ 67.598305 / 01-03 15:39:15.119][1] [EXFAT] (mmcblk0p1[179:1]): mounted successfully!
2325<7>[ 67.598399 / 01-03 15:39:15.119][1] SELinux: initialized (dev mmcblk0p1, type exfat), uses genfs_contexts
2326<6>[ 67.604271 / 01-03 15:39:15.129][1] lge,blmap: br_lvl(112) -> bl_lvl(428)
2327<13>[ 67.613439 / 01-03 15:39:15.000][0] init: Service 'adbd' is being killed...
2328<6>[ 67.614105 / 01-03 15:39:15.000][0] android_usb android0: gadget enable(0)
2329<6>[ 67.614167 / 01-03 15:39:15.000][0] android_disable: android_disable: checked disable_depth(0)
2330<3>[ 67.614223 / 01-03 15:39:15.000][0] dwc3 6a00000.dwc3: request ffffffc0f4d55e00 was not queued to ep0out
2331<6>[ 67.614596 / 01-03 15:39:15.000][0] ffs_function_disable: ffs_function_disable: config->opened(1)
2332<6>[ 67.615271 / 01-03 15:39:15.000][2] functionfs_closed_callback: functionfs_closed_callback: config->enabled(0), dev(ffffffc0f4da0800)
2333<13>[ 67.616060 / 01-03 15:39:15.000][0] init: Service 'adbd' (pid 412) killed by signal 9
2334<13>[ 67.616152 / 01-03 15:39:15.000][0] init: Service 'adbd' (pid 412) killing any children in process group
2335<6>[ 67.616918 / 01-03 15:39:15.000][0] android_usb android0: gadget enable(0)
2336<6>[ 67.617409 / 01-03 15:39:15.000][0] android_usb android0: LGE-USB request function list: adb
2337<6>[ 67.617627 / 01-03 15:39:15.000][0] android_usb android0: gadget enable(1)
2338<6>[ 67.617679 / 01-03 15:39:15.000][0] ffs_function_enable: ffs_function_enable: config->opened(0)
2339<6>[ 67.617716 / 01-03 15:39:15.000][0] android_disable: android_disable: checked disable_depth(1)
2340<6>[ 67.617752 / 01-03 15:39:15.000][0] android_enable: android_enable: checked disable_depth(2)
2341<13>[ 67.617889 / 01-03 15:39:15.000][0] init: Starting service 'adbd'...
2342<6>[ 67.626428 / 01-03 15:39:15.000][3] read descriptors
2343<6>[ 67.626521 / 01-03 15:39:15.000][3] read strings
2344<6>[ 67.626607 / 01-03 15:39:15.000][3] functionfs_ready_callback: functionfs_ready_callback: config->enabled(1), dev(ffffffc0f4da0800)
2345<6>[ 67.626647 / 01-03 15:39:15.000][3] android_enable: android_enable: checked disable_depth(1)
2346<6>[ 67.637971 / 01-03 15:39:15.009][1] EXT4-fs (sda18): mounted filesystem with ordered data mode. Opts:
2347<7>[ 67.638074 / 01-03 15:39:15.009][1] SELinux: initialized (dev sda18, type ext4), uses xattr
2348<4>[ 67.641531 / 01-03 15:39:15.019][0] audit_printk_skb: 54 callbacks suppressed
2349<5>[ 67.641593 / 01-03 15:39:15.019][0] audit: type=1400 audit(1451835555.019:30): avc: denied { create } for pid=411 comm="recovery" name="orsin" scontext=u:r:init:s0 tcontext=u:object_r:rootfs:s0 tclass=fifo_file permissive=1
2350<5>[ 67.641874 / 01-03 15:39:15.019][0] audit: type=1400 audit(1451835555.019:31): avc: denied { read } for pid=411 comm="recovery" name="orsin" dev="rootfs" ino=6718 scontext=u:r:init:s0 tcontext=u:object_r:rootfs:s0 tclass=fifo_file permissive=1
2351<5>[ 67.641994 / 01-03 15:39:15.019][0] audit: type=1400 audit(1451835555.019:32): avc: denied { open } for pid=411 comm="recovery" path="/sbin/orsin" dev="rootfs" ino=6718 scontext=u:r:init:s0 tcontext=u:object_r:rootfs:s0 tclass=fifo_file permissive=1
2352<6>[ 67.651720 / 01-03 15:39:15.029][3] dwc3_gadget_run_stop Queue DCP check work! 0
2353<3>[ 67.756747 / 01-03 15:39:15.129][0] dwc3_gadget_suspend_interrupt(): state:0. Ignore SUSPEND.
2354<6>[ 67.853276 / 01-03 15:39:15.229][0] android_work: android_work: sent uevent USB_STATE=DISCONNECTED
2355<6>[ 67.903154 / 01-03 15:39:15.279][0] msm-dwc3 6a00000.ssusb: DWC3_CONTROLLER_CONNDONE_EVENT received
2356<6>[ 67.986921 / 01-03 15:39:15.359][0] android_work: android_work: sent uevent USB_STATE=CONNECTED
2357<6>[ 68.345608 / 01-03 15:39:15.729][2] SMBCHG: usbin_uv_handler: chip->usb_present = 1 rt_sts = 0x05 hvdcp_3_det_ignore_uv = 0 aicl = 1700
2358<6>[ 68.345656 / 01-03 15:39:15.729][3] SMBCHG: power_ok_handler: triggered: 0x00
2359<6>[ 68.347344 / 01-03 15:39:15.729][2] SMBCHG: usbin_uv_handler: Very weak charger detected. VBUS[4912]
2360<6>[ 68.347414 / 01-03 15:39:15.729][2] SMBCHG: usbin_uv_handler: could not get current_max mode, rc=-22
2361<6>[ 68.347488 / 01-03 15:39:15.729][2] SMBCHG: usbin_uv_handler: usb_type[SDP], current_max_mode[0]
2362<3>[ 68.347528 / 01-03 15:39:15.729][2] SMBCHG: usbin_uv_handler: could not disable charger: -22
2363<6>[ 68.347653 / 01-03 15:39:15.729][2] dwc3_msm_power_get_property_usb: POWER_SUPPLY_PROP_VOLTAGE_NOW
2364<3>[ 68.350640 / 01-03 15:39:15.729][2] vote: name[SMBCHG: battchg_suspend], client_id[1], state[0], val[0]
2365<7>[ 68.350684 / 01-03 15:39:15.729][2] SMBCHG: battchg_suspend: votes unchanged; skipping
2366<3>[ 68.350751 / 01-03 15:39:15.729][2] SMBCHG: smbchg_config_chg_battery_type: BATTERY FULL NAME : LGE_BL44E1F_LGC_3200mAh
2367<3>[ 68.350848 / 01-03 15:39:15.729][2] vote: name[SMBCHG: usb_icl], client_id[0], state[1], val[500]
2368<7>[ 68.350882 / 01-03 15:39:15.729][2] SMBCHG: usb_icl: votes unchanged; skipping
2369<6>[ 68.350916 / 01-03 15:39:15.729][2] SMBCHG: smbchg_stay_awake: staying awake: 0x02 (bit 2)
2370<6>[ 68.350957 / 01-03 15:39:15.729][2] SMBCHG: smbchg_vfloat_adjust_check: Starting vfloat adjustments
2371<6>[ 68.351044 / 01-03 15:39:15.729][2] SMBCHG: smbchg_relax: relaxing: 0x00 (bit 2)
2372<6>[ 68.365808 / 01-03 15:39:15.739][2] SMBCHG: usbin_uv_handler: chip->usb_present = 1 rt_sts = 0x04 hvdcp_3_det_ignore_uv = 0 aicl = 1700
2373<6>[ 68.365845 / 01-03 15:39:15.739][3] SMBCHG: power_ok_handler: triggered: 0x01
2374<6>[ 68.446650 / 01-03 15:39:15.829][2] SMBCHG: usbin_uv_handler: chip->usb_present = 1 rt_sts = 0x05 hvdcp_3_det_ignore_uv = 0 aicl = 1700
2375<6>[ 68.446681 / 01-03 15:39:15.829][3] SMBCHG: power_ok_handler: triggered: 0x00
2376<6>[ 68.448199 / 01-03 15:39:15.829][2] SMBCHG: usbin_uv_handler: Very weak charger detected. VBUS[4867]
2377<6>[ 68.448257 / 01-03 15:39:15.829][2] SMBCHG: usbin_uv_handler: could not get current_max mode, rc=-22
2378<6>[ 68.448322 / 01-03 15:39:15.829][2] SMBCHG: usbin_uv_handler: usb_type[SDP], current_max_mode[0]
2379<3>[ 68.448353 / 01-03 15:39:15.829][2] SMBCHG: usbin_uv_handler: could not disable charger: -22
2380<6>[ 68.448459 / 01-03 15:39:15.829][2] dwc3_msm_power_get_property_usb: POWER_SUPPLY_PROP_VOLTAGE_NOW
2381<3>[ 68.451493 / 01-03 15:39:15.829][2] vote: name[SMBCHG: battchg_suspend], client_id[1], state[0], val[0]
2382<7>[ 68.451530 / 01-03 15:39:15.829][2] SMBCHG: battchg_suspend: votes unchanged; skipping
2383<3>[ 68.451588 / 01-03 15:39:15.829][2] SMBCHG: smbchg_config_chg_battery_type: BATTERY FULL NAME : LGE_BL44E1F_LGC_3200mAh
2384<3>[ 68.451678 / 01-03 15:39:15.829][2] vote: name[SMBCHG: usb_icl], client_id[0], state[1], val[500]
2385<7>[ 68.451709 / 01-03 15:39:15.829][2] SMBCHG: usb_icl: votes unchanged; skipping
2386<6>[ 68.451740 / 01-03 15:39:15.829][2] SMBCHG: smbchg_stay_awake: staying awake: 0x02 (bit 2)
2387<6>[ 68.451778 / 01-03 15:39:15.829][2] SMBCHG: smbchg_vfloat_adjust_check: Starting vfloat adjustments
2388<6>[ 68.451860 / 01-03 15:39:15.829][2] SMBCHG: smbchg_relax: relaxing: 0x00 (bit 2)
2389<6>[ 68.466880 / 01-03 15:39:15.839][2] SMBCHG: usbin_uv_handler: chip->usb_present = 1 rt_sts = 0x04 hvdcp_3_det_ignore_uv = 0 aicl = 1700
2390<6>[ 68.466916 / 01-03 15:39:15.839][3] SMBCHG: power_ok_handler: triggered: 0x01
2391<6>[ 68.522454 / 01-03 15:39:15.909][2] SMBCHG: usbin_uv_handler: chip->usb_present = 1 rt_sts = 0x05 hvdcp_3_det_ignore_uv = 0 aicl = 1700
2392<6>[ 68.522483 / 01-03 15:39:15.909][3] SMBCHG: power_ok_handler: triggered: 0x00
2393<6>[ 68.523987 / 01-03 15:39:15.909][2] SMBCHG: usbin_uv_handler: Very weak charger detected. VBUS[4871]
2394<6>[ 68.524045 / 01-03 15:39:15.909][2] SMBCHG: usbin_uv_handler: could not get current_max mode, rc=-22
2395<6>[ 68.524109 / 01-03 15:39:15.909][2] SMBCHG: usbin_uv_handler: usb_type[SDP], current_max_mode[0]
2396<3>[ 68.524141 / 01-03 15:39:15.909][2] SMBCHG: usbin_uv_handler: could not disable charger: -22
2397<6>[ 68.524244 / 01-03 15:39:15.909][2] dwc3_msm_power_get_property_usb: POWER_SUPPLY_PROP_VOLTAGE_NOW
2398<3>[ 68.527162 / 01-03 15:39:15.909][2] vote: name[SMBCHG: battchg_suspend], client_id[1], state[0], val[0]
2399<7>[ 68.527200 / 01-03 15:39:15.909][2] SMBCHG: battchg_suspend: votes unchanged; skipping
2400<3>[ 68.527257 / 01-03 15:39:15.909][2] SMBCHG: smbchg_config_chg_battery_type: BATTERY FULL NAME : LGE_BL44E1F_LGC_3200mAh
2401<3>[ 68.527344 / 01-03 15:39:15.909][2] vote: name[SMBCHG: usb_icl], client_id[0], state[1], val[500]
2402<7>[ 68.527376 / 01-03 15:39:15.909][2] SMBCHG: usb_icl: votes unchanged; skipping
2403<6>[ 68.527407 / 01-03 15:39:15.909][2] SMBCHG: smbchg_stay_awake: staying awake: 0x02 (bit 2)
2404<6>[ 68.527444 / 01-03 15:39:15.909][2] SMBCHG: smbchg_vfloat_adjust_check: Starting vfloat adjustments
2405<6>[ 68.527524 / 01-03 15:39:15.909][2] SMBCHG: smbchg_relax: relaxing: 0x00 (bit 2)
2406<6>[ 68.542669 / 01-03 15:39:15.929][2] SMBCHG: usbin_uv_handler: chip->usb_present = 1 rt_sts = 0x04 hvdcp_3_det_ignore_uv = 0 aicl = 1700
2407<6>[ 68.542698 / 01-03 15:39:15.929][3] SMBCHG: power_ok_handler: triggered: 0x01
2408<6>[ 68.595734 / 01-03 15:39:15.979][2] SMBCHG: usbin_uv_handler: chip->usb_present = 1 rt_sts = 0x05 hvdcp_3_det_ignore_uv = 0 aicl = 1700
2409<6>[ 68.595767 / 01-03 15:39:15.979][3] SMBCHG: power_ok_handler: triggered: 0x00
2410<6>[ 68.597262 / 01-03 15:39:15.979][2] SMBCHG: usbin_uv_handler: Very weak charger detected. VBUS[4916]
2411<6>[ 68.597319 / 01-03 15:39:15.979][2] SMBCHG: usbin_uv_handler: could not get current_max mode, rc=-22
2412<6>[ 68.597383 / 01-03 15:39:15.979][2] SMBCHG: usbin_uv_handler: usb_type[SDP], current_max_mode[0]
2413<3>[ 68.597414 / 01-03 15:39:15.979][2] SMBCHG: usbin_uv_handler: could not disable charger: -22
2414<6>[ 68.597514 / 01-03 15:39:15.979][2] dwc3_msm_power_get_property_usb: POWER_SUPPLY_PROP_VOLTAGE_NOW
2415<3>[ 68.600433 / 01-03 15:39:15.979][2] vote: name[SMBCHG: battchg_suspend], client_id[1], state[0], val[0]
2416<7>[ 68.600470 / 01-03 15:39:15.979][2] SMBCHG: battchg_suspend: votes unchanged; skipping
2417<3>[ 68.600528 / 01-03 15:39:15.979][2] SMBCHG: smbchg_config_chg_battery_type: BATTERY FULL NAME : LGE_BL44E1F_LGC_3200mAh
2418<3>[ 68.600612 / 01-03 15:39:15.979][2] vote: name[SMBCHG: usb_icl], client_id[0], state[1], val[500]
2419<7>[ 68.600644 / 01-03 15:39:15.979][2] SMBCHG: usb_icl: votes unchanged; skipping
2420<6>[ 68.600675 / 01-03 15:39:15.979][2] SMBCHG: smbchg_stay_awake: staying awake: 0x02 (bit 2)
2421<6>[ 68.600711 / 01-03 15:39:15.979][2] SMBCHG: smbchg_vfloat_adjust_check: Starting vfloat adjustments
2422<6>[ 68.600789 / 01-03 15:39:15.979][2] SMBCHG: smbchg_relax: relaxing: 0x00 (bit 2)
2423<6>[ 68.615971 / 01-03 15:39:15.989][2] SMBCHG: usbin_uv_handler: chip->usb_present = 1 rt_sts = 0x04 hvdcp_3_det_ignore_uv = 0 aicl = 1700
2424<6>[ 68.616006 / 01-03 15:39:15.989][3] SMBCHG: power_ok_handler: triggered: 0x01
2425<6>[ 68.629427 / 01-03 15:39:15.999][0] android_usb gadget: high-speed config #1: 66bf0c8.android_usb
2426<6>[ 68.643762 / 01-03 15:39:16.029][2] SMBCHG: usbin_uv_handler: chip->usb_present = 1 rt_sts = 0x05 hvdcp_3_det_ignore_uv = 0 aicl = 1700
2427<6>[ 68.643792 / 01-03 15:39:16.029][3] SMBCHG: power_ok_handler: triggered: 0x00
2428<6>[ 68.645296 / 01-03 15:39:16.029][2] SMBCHG: usbin_uv_handler: Very weak charger detected. VBUS[4877]
2429<6>[ 68.645355 / 01-03 15:39:16.029][2] SMBCHG: usbin_uv_handler: could not get current_max mode, rc=-22
2430<6>[ 68.645417 / 01-03 15:39:16.029][2] SMBCHG: usbin_uv_handler: usb_type[SDP], current_max_mode[0]
2431<3>[ 68.645449 / 01-03 15:39:16.029][2] SMBCHG: usbin_uv_handler: could not disable charger: -22
2432<6>[ 68.645552 / 01-03 15:39:16.029][2] dwc3_msm_power_get_property_usb: POWER_SUPPLY_PROP_VOLTAGE_NOW
2433<3>[ 68.648468 / 01-03 15:39:16.029][2] vote: name[SMBCHG: battchg_suspend], client_id[1], state[0], val[0]
2434<7>[ 68.648506 / 01-03 15:39:16.029][2] SMBCHG: battchg_suspend: votes unchanged; skipping
2435<3>[ 68.648564 / 01-03 15:39:16.029][2] SMBCHG: smbchg_config_chg_battery_type: BATTERY FULL NAME : LGE_BL44E1F_LGC_3200mAh
2436<3>[ 68.648651 / 01-03 15:39:16.029][2] vote: name[SMBCHG: usb_icl], client_id[0], state[1], val[500]
2437<7>[ 68.648683 / 01-03 15:39:16.029][2] SMBCHG: usb_icl: votes unchanged; skipping
2438<6>[ 68.648715 / 01-03 15:39:16.029][2] SMBCHG: smbchg_stay_awake: staying awake: 0x02 (bit 2)
2439<6>[ 68.648751 / 01-03 15:39:16.029][2] SMBCHG: smbchg_vfloat_adjust_check: Starting vfloat adjustments
2440<6>[ 68.648830 / 01-03 15:39:16.029][2] SMBCHG: smbchg_relax: relaxing: 0x00 (bit 2)
2441<6>[ 68.663970 / 01-03 15:39:16.039][2] SMBCHG: usbin_uv_handler: chip->usb_present = 1 rt_sts = 0x04 hvdcp_3_det_ignore_uv = 0 aicl = 1700
2442<6>[ 68.664000 / 01-03 15:39:16.039][3] SMBCHG: power_ok_handler: triggered: 0x01
2443<6>[ 68.690251 / 01-03 15:39:16.069][0] android_work: android_work: sent uevent USB_STATE=CONFIGURED
2444<6>[ 68.691773 / 01-03 15:39:16.069][2] SMBCHG: usbin_uv_handler: chip->usb_present = 1 rt_sts = 0x05 hvdcp_3_det_ignore_uv = 0 aicl = 1700
2445<6>[ 68.691809 / 01-03 15:39:16.069][3] SMBCHG: power_ok_handler: triggered: 0x00
2446<6>[ 68.693279 / 01-03 15:39:16.069][2] SMBCHG: usbin_uv_handler: Very weak charger detected. VBUS[4906]
2447<6>[ 68.693336 / 01-03 15:39:16.069][2] SMBCHG: usbin_uv_handler: could not get current_max mode, rc=-22
2448<6>[ 68.693400 / 01-03 15:39:16.069][2] SMBCHG: usbin_uv_handler: usb_type[SDP], current_max_mode[0]
2449<3>[ 68.693431 / 01-03 15:39:16.069][2] SMBCHG: usbin_uv_handler: could not disable charger: -22
2450<6>[ 68.693533 / 01-03 15:39:16.069][2] dwc3_msm_power_get_property_usb: POWER_SUPPLY_PROP_VOLTAGE_NOW
2451<3>[ 68.696439 / 01-03 15:39:16.069][2] vote: name[SMBCHG: battchg_suspend], client_id[1], state[0], val[0]
2452<7>[ 68.696476 / 01-03 15:39:16.069][2] SMBCHG: battchg_suspend: votes unchanged; skipping
2453<3>[ 68.696533 / 01-03 15:39:16.069][2] SMBCHG: smbchg_config_chg_battery_type: BATTERY FULL NAME : LGE_BL44E1F_LGC_3200mAh
2454<3>[ 68.696618 / 01-03 15:39:16.069][2] vote: name[SMBCHG: usb_icl], client_id[0], state[1], val[500]
2455<7>[ 68.696650 / 01-03 15:39:16.069][2] SMBCHG: usb_icl: votes unchanged; skipping
2456<6>[ 68.696681 / 01-03 15:39:16.069][2] SMBCHG: smbchg_stay_awake: staying awake: 0x02 (bit 2)
2457<6>[ 68.696717 / 01-03 15:39:16.069][2] SMBCHG: smbchg_vfloat_adjust_check: Starting vfloat adjustments
2458<6>[ 68.696795 / 01-03 15:39:16.069][2] SMBCHG: smbchg_relax: relaxing: 0x00 (bit 2)
2459<6>[ 68.712001 / 01-03 15:39:16.089][2] SMBCHG: usbin_uv_handler: chip->usb_present = 1 rt_sts = 0x04 hvdcp_3_det_ignore_uv = 0 aicl = 1700
2460<6>[ 68.712031 / 01-03 15:39:16.089][3] SMBCHG: power_ok_handler: triggered: 0x01
2461<6>[ 68.888867 / 01-03 15:39:16.269][2] SMBCHG: usbin_uv_handler: chip->usb_present = 1 rt_sts = 0x05 hvdcp_3_det_ignore_uv = 0 aicl = 1700
2462<6>[ 68.888900 / 01-03 15:39:16.269][3] SMBCHG: power_ok_handler: triggered: 0x00
2463<6>[ 68.890404 / 01-03 15:39:16.269][2] SMBCHG: usbin_uv_handler: Very weak charger detected. VBUS[4906]
2464<6>[ 68.890460 / 01-03 15:39:16.269][2] SMBCHG: usbin_uv_handler: could not get current_max mode, rc=-22
2465<6>[ 68.890521 / 01-03 15:39:16.269][2] SMBCHG: usbin_uv_handler: usb_type[SDP], current_max_mode[0]
2466<3>[ 68.890552 / 01-03 15:39:16.269][2] SMBCHG: usbin_uv_handler: could not disable charger: -22
2467<6>[ 68.890653 / 01-03 15:39:16.269][2] dwc3_msm_power_get_property_usb: POWER_SUPPLY_PROP_VOLTAGE_NOW
2468<3>[ 68.893557 / 01-03 15:39:16.269][2] vote: name[SMBCHG: battchg_suspend], client_id[1], state[0], val[0]
2469<7>[ 68.893594 / 01-03 15:39:16.269][2] SMBCHG: battchg_suspend: votes unchanged; skipping
2470<3>[ 68.893651 / 01-03 15:39:16.269][2] SMBCHG: smbchg_config_chg_battery_type: BATTERY FULL NAME : LGE_BL44E1F_LGC_3200mAh
2471<3>[ 68.893736 / 01-03 15:39:16.269][2] vote: name[SMBCHG: usb_icl], client_id[0], state[1], val[500]
2472<7>[ 68.893768 / 01-03 15:39:16.269][2] SMBCHG: usb_icl: votes unchanged; skipping
2473<6>[ 68.893797 / 01-03 15:39:16.269][2] SMBCHG: smbchg_stay_awake: staying awake: 0x02 (bit 2)
2474<6>[ 68.893832 / 01-03 15:39:16.269][2] SMBCHG: smbchg_vfloat_adjust_check: Starting vfloat adjustments
2475<6>[ 68.893912 / 01-03 15:39:16.269][2] SMBCHG: smbchg_relax: relaxing: 0x00 (bit 2)
2476<6>[ 68.909080 / 01-03 15:39:16.279][2] SMBCHG: usbin_uv_handler: chip->usb_present = 1 rt_sts = 0x04 hvdcp_3_det_ignore_uv = 0 aicl = 1700
2477<6>[ 68.909116 / 01-03 15:39:16.279][3] SMBCHG: power_ok_handler: triggered: 0x01
2478<6>[ 68.939392 / 01-03 15:39:16.319][2] SMBCHG: usbin_uv_handler: chip->usb_present = 1 rt_sts = 0x05 hvdcp_3_det_ignore_uv = 0 aicl = 1700
2479<6>[ 68.939424 / 01-03 15:39:16.319][3] SMBCHG: power_ok_handler: triggered: 0x00
2480<6>[ 68.940930 / 01-03 15:39:16.319][2] SMBCHG: usbin_uv_handler: Very weak charger detected. VBUS[4867]
2481<6>[ 68.940987 / 01-03 15:39:16.319][2] SMBCHG: usbin_uv_handler: could not get current_max mode, rc=-22
2482<6>[ 68.941049 / 01-03 15:39:16.319][2] SMBCHG: usbin_uv_handler: usb_type[SDP], current_max_mode[0]
2483<3>[ 68.941080 / 01-03 15:39:16.319][2] SMBCHG: usbin_uv_handler: could not disable charger: -22
2484<6>[ 68.941184 / 01-03 15:39:16.319][2] dwc3_msm_power_get_property_usb: POWER_SUPPLY_PROP_VOLTAGE_NOW
2485<3>[ 68.944092 / 01-03 15:39:16.319][2] vote: name[SMBCHG: battchg_suspend], client_id[1], state[0], val[0]
2486<7>[ 68.944129 / 01-03 15:39:16.319][2] SMBCHG: battchg_suspend: votes unchanged; skipping
2487<3>[ 68.944187 / 01-03 15:39:16.319][2] SMBCHG: smbchg_config_chg_battery_type: BATTERY FULL NAME : LGE_BL44E1F_LGC_3200mAh
2488<3>[ 68.944272 / 01-03 15:39:16.319][2] vote: name[SMBCHG: usb_icl], client_id[0], state[1], val[500]
2489<7>[ 68.944303 / 01-03 15:39:16.319][2] SMBCHG: usb_icl: votes unchanged; skipping
2490<6>[ 68.944333 / 01-03 15:39:16.319][2] SMBCHG: smbchg_stay_awake: staying awake: 0x02 (bit 2)
2491<6>[ 68.944369 / 01-03 15:39:16.319][2] SMBCHG: smbchg_vfloat_adjust_check: Starting vfloat adjustments
2492<6>[ 68.944449 / 01-03 15:39:16.319][2] SMBCHG: smbchg_relax: relaxing: 0x00 (bit 2)
2493<6>[ 68.959613 / 01-03 15:39:16.339][2] SMBCHG: usbin_uv_handler: chip->usb_present = 1 rt_sts = 0x04 hvdcp_3_det_ignore_uv = 0 aicl = 1700
2494<6>[ 68.959643 / 01-03 15:39:16.339][3] SMBCHG: power_ok_handler: triggered: 0x01
2495<6>[ 69.182071 / 01-03 15:39:16.569][2] SMBCHG: usbin_uv_handler: chip->usb_present = 1 rt_sts = 0x05 hvdcp_3_det_ignore_uv = 0 aicl = 1700
2496<6>[ 69.182101 / 01-03 15:39:16.569][3] SMBCHG: power_ok_handler: triggered: 0x00
2497<6>[ 69.183594 / 01-03 15:39:16.569][2] SMBCHG: usbin_uv_handler: Very weak charger detected. VBUS[4886]
2498<6>[ 69.183650 / 01-03 15:39:16.569][2] SMBCHG: usbin_uv_handler: could not get current_max mode, rc=-22
2499<6>[ 69.183711 / 01-03 15:39:16.569][2] SMBCHG: usbin_uv_handler: usb_type[SDP], current_max_mode[0]
2500<3>[ 69.183742 / 01-03 15:39:16.569][2] SMBCHG: usbin_uv_handler: could not disable charger: -22
2501<6>[ 69.183843 / 01-03 15:39:16.569][2] dwc3_msm_power_get_property_usb: POWER_SUPPLY_PROP_VOLTAGE_NOW
2502<3>[ 69.186747 / 01-03 15:39:16.569][2] vote: name[SMBCHG: battchg_suspend], client_id[1], state[0], val[0]
2503<7>[ 69.186785 / 01-03 15:39:16.569][2] SMBCHG: battchg_suspend: votes unchanged; skipping
2504<3>[ 69.186841 / 01-03 15:39:16.569][2] SMBCHG: smbchg_config_chg_battery_type: BATTERY FULL NAME : LGE_BL44E1F_LGC_3200mAh
2505<3>[ 69.186926 / 01-03 15:39:16.569][2] vote: name[SMBCHG: usb_icl], client_id[0], state[1], val[500]
2506<7>[ 69.186957 / 01-03 15:39:16.569][2] SMBCHG: usb_icl: votes unchanged; skipping
2507<6>[ 69.186988 / 01-03 15:39:16.569][2] SMBCHG: smbchg_stay_awake: staying awake: 0x02 (bit 2)
2508<6>[ 69.187024 / 01-03 15:39:16.569][2] SMBCHG: smbchg_vfloat_adjust_check: Starting vfloat adjustments
2509<6>[ 69.187103 / 01-03 15:39:16.569][2] SMBCHG: smbchg_relax: relaxing: 0x00 (bit 2)
2510<6>[ 69.202313 / 01-03 15:39:16.579][2] SMBCHG: usbin_uv_handler: chip->usb_present = 1 rt_sts = 0x04 hvdcp_3_det_ignore_uv = 0 aicl = 1700
2511<6>[ 69.202343 / 01-03 15:39:16.579][3] SMBCHG: power_ok_handler: triggered: 0x01
2512<6>[ 69.230124 / 01-03 15:39:16.609][2] SMBCHG: usbin_uv_handler: chip->usb_present = 1 rt_sts = 0x05 hvdcp_3_det_ignore_uv = 0 aicl = 1700
2513<6>[ 69.230155 / 01-03 15:39:16.609][3] SMBCHG: power_ok_handler: triggered: 0x00
2514<6>[ 69.231649 / 01-03 15:39:16.609][2] SMBCHG: usbin_uv_handler: Very weak charger detected. VBUS[4867]
2515<6>[ 69.231705 / 01-03 15:39:16.609][2] SMBCHG: usbin_uv_handler: could not get current_max mode, rc=-22
2516<6>[ 69.231766 / 01-03 15:39:16.609][2] SMBCHG: usbin_uv_handler: usb_type[SDP], current_max_mode[0]
2517<3>[ 69.231797 / 01-03 15:39:16.609][2] SMBCHG: usbin_uv_handler: could not disable charger: -22
2518<6>[ 69.231900 / 01-03 15:39:16.609][2] dwc3_msm_power_get_property_usb: POWER_SUPPLY_PROP_VOLTAGE_NOW
2519<3>[ 69.235322 / 01-03 15:39:16.609][2] vote: name[SMBCHG: battchg_suspend], client_id[1], state[0], val[0]
2520<7>[ 69.235362 / 01-03 15:39:16.609][2] SMBCHG: battchg_suspend: votes unchanged; skipping
2521<3>[ 69.235420 / 01-03 15:39:16.609][2] SMBCHG: smbchg_config_chg_battery_type: BATTERY FULL NAME : LGE_BL44E1F_LGC_3200mAh
2522<3>[ 69.235508 / 01-03 15:39:16.609][2] vote: name[SMBCHG: usb_icl], client_id[0], state[1], val[500]
2523<7>[ 69.235540 / 01-03 15:39:16.609][2] SMBCHG: usb_icl: votes unchanged; skipping
2524<6>[ 69.235571 / 01-03 15:39:16.609][2] SMBCHG: smbchg_stay_awake: staying awake: 0x02 (bit 2)
2525<6>[ 69.235607 / 01-03 15:39:16.609][2] SMBCHG: smbchg_vfloat_adjust_check: Starting vfloat adjustments
2526<6>[ 69.235690 / 01-03 15:39:16.609][2] SMBCHG: smbchg_relax: relaxing: 0x00 (bit 2)
2527<6>[ 69.250349 / 01-03 15:39:16.629][2] SMBCHG: usbin_uv_handler: chip->usb_present = 1 rt_sts = 0x04 hvdcp_3_det_ignore_uv = 0 aicl = 1700
2528<6>[ 69.250378 / 01-03 15:39:16.629][3] SMBCHG: power_ok_handler: triggered: 0x01
2529<6>[ 69.290778 / 01-03 15:39:16.669][2] SMBCHG: usbin_uv_handler: chip->usb_present = 1 rt_sts = 0x05 hvdcp_3_det_ignore_uv = 0 aicl = 1700
2530<6>[ 69.290806 / 01-03 15:39:16.669][3] SMBCHG: power_ok_handler: triggered: 0x00
2531<6>[ 69.292303 / 01-03 15:39:16.669][2] SMBCHG: usbin_uv_handler: Very weak charger detected. VBUS[4873]
2532<6>[ 69.292359 / 01-03 15:39:16.669][2] SMBCHG: usbin_uv_handler: could not get current_max mode, rc=-22
2533<6>[ 69.292422 / 01-03 15:39:16.669][2] SMBCHG: usbin_uv_handler: usb_type[SDP], current_max_mode[0]
2534<3>[ 69.292453 / 01-03 15:39:16.669][2] SMBCHG: usbin_uv_handler: could not disable charger: -22
2535<6>[ 69.292553 / 01-03 15:39:16.669][2] dwc3_msm_power_get_property_usb: POWER_SUPPLY_PROP_VOLTAGE_NOW
2536<3>[ 69.295464 / 01-03 15:39:16.669][2] vote: name[SMBCHG: battchg_suspend], client_id[1], state[0], val[0]
2537<7>[ 69.295502 / 01-03 15:39:16.669][2] SMBCHG: battchg_suspend: votes unchanged; skipping
2538<3>[ 69.295560 / 01-03 15:39:16.669][2] SMBCHG: smbchg_config_chg_battery_type: BATTERY FULL NAME : LGE_BL44E1F_LGC_3200mAh
2539<3>[ 69.295645 / 01-03 15:39:16.669][2] vote: name[SMBCHG: usb_icl], client_id[0], state[1], val[500]
2540<7>[ 69.295676 / 01-03 15:39:16.669][2] SMBCHG: usb_icl: votes unchanged; skipping
2541<6>[ 69.295708 / 01-03 15:39:16.669][2] SMBCHG: smbchg_stay_awake: staying awake: 0x02 (bit 2)
2542<6>[ 69.295744 / 01-03 15:39:16.669][2] SMBCHG: smbchg_vfloat_adjust_check: Starting vfloat adjustments
2543<6>[ 69.295822 / 01-03 15:39:16.669][2] SMBCHG: smbchg_relax: relaxing: 0x00 (bit 2)
2544<6>[ 69.310983 / 01-03 15:39:16.689][2] SMBCHG: usbin_uv_handler: chip->usb_present = 1 rt_sts = 0x04 hvdcp_3_det_ignore_uv = 0 aicl = 1700
2545<6>[ 69.311015 / 01-03 15:39:16.689][3] SMBCHG: power_ok_handler: triggered: 0x01
2546<6>[ 69.338793 / 01-03 15:39:16.719][2] SMBCHG: usbin_uv_handler: chip->usb_present = 1 rt_sts = 0x05 hvdcp_3_det_ignore_uv = 0 aicl = 1700
2547<6>[ 69.338823 / 01-03 15:39:16.719][3] SMBCHG: power_ok_handler: triggered: 0x00
2548<6>[ 69.340351 / 01-03 15:39:16.719][2] SMBCHG: usbin_uv_handler: Very weak charger detected. VBUS[4875]
2549<6>[ 69.340406 / 01-03 15:39:16.719][2] SMBCHG: usbin_uv_handler: could not get current_max mode, rc=-22
2550<6>[ 69.340469 / 01-03 15:39:16.719][2] SMBCHG: usbin_uv_handler: usb_type[SDP], current_max_mode[0]
2551<3>[ 69.340500 / 01-03 15:39:16.719][2] SMBCHG: usbin_uv_handler: could not disable charger: -22
2552<6>[ 69.340605 / 01-03 15:39:16.719][2] dwc3_msm_power_get_property_usb: POWER_SUPPLY_PROP_VOLTAGE_NOW
2553<3>[ 69.343523 / 01-03 15:39:16.719][2] vote: name[SMBCHG: battchg_suspend], client_id[1], state[0], val[0]
2554<7>[ 69.343560 / 01-03 15:39:16.719][2] SMBCHG: battchg_suspend: votes unchanged; skipping
2555<3>[ 69.343618 / 01-03 15:39:16.719][2] SMBCHG: smbchg_config_chg_battery_type: BATTERY FULL NAME : LGE_BL44E1F_LGC_3200mAh
2556<3>[ 69.343705 / 01-03 15:39:16.719][2] vote: name[SMBCHG: usb_icl], client_id[0], state[1], val[500]
2557<7>[ 69.343736 / 01-03 15:39:16.719][2] SMBCHG: usb_icl: votes unchanged; skipping
2558<6>[ 69.343765 / 01-03 15:39:16.719][2] SMBCHG: smbchg_stay_awake: staying awake: 0x02 (bit 2)
2559<6>[ 69.343801 / 01-03 15:39:16.719][2] SMBCHG: smbchg_vfloat_adjust_check: Starting vfloat adjustments
2560<6>[ 69.343880 / 01-03 15:39:16.719][2] SMBCHG: smbchg_relax: relaxing: 0x00 (bit 2)
2561<6>[ 69.359027 / 01-03 15:39:16.729][2] SMBCHG: usbin_uv_handler: chip->usb_present = 1 rt_sts = 0x04 hvdcp_3_det_ignore_uv = 0 aicl = 1700
2562<6>[ 69.359063 / 01-03 15:39:16.729][3] SMBCHG: power_ok_handler: triggered: 0x01
2563<6>[ 69.386826 / 01-03 15:39:16.769][2] SMBCHG: usbin_uv_handler: chip->usb_present = 1 rt_sts = 0x05 hvdcp_3_det_ignore_uv = 0 aicl = 1700
2564<6>[ 69.386857 / 01-03 15:39:16.769][3] SMBCHG: power_ok_handler: triggered: 0x00
2565<6>[ 69.388369 / 01-03 15:39:16.769][2] SMBCHG: usbin_uv_handler: Very weak charger detected. VBUS[4873]
2566<6>[ 69.388428 / 01-03 15:39:16.769][2] SMBCHG: usbin_uv_handler: could not get current_max mode, rc=-22
2567<6>[ 69.388494 / 01-03 15:39:16.769][2] SMBCHG: usbin_uv_handler: usb_type[SDP], current_max_mode[0]
2568<3>[ 69.388526 / 01-03 15:39:16.769][2] SMBCHG: usbin_uv_handler: could not disable charger: -22
2569<6>[ 69.388631 / 01-03 15:39:16.769][2] dwc3_msm_power_get_property_usb: POWER_SUPPLY_PROP_VOLTAGE_NOW
2570<3>[ 69.391636 / 01-03 15:39:16.769][2] vote: name[SMBCHG: battchg_suspend], client_id[1], state[0], val[0]
2571<7>[ 69.391675 / 01-03 15:39:16.769][2] SMBCHG: battchg_suspend: votes unchanged; skipping
2572<3>[ 69.391734 / 01-03 15:39:16.769][2] SMBCHG: smbchg_config_chg_battery_type: BATTERY FULL NAME : LGE_BL44E1F_LGC_3200mAh
2573<3>[ 69.391824 / 01-03 15:39:16.769][2] vote: name[SMBCHG: usb_icl], client_id[0], state[1], val[500]
2574<7>[ 69.391856 / 01-03 15:39:16.769][2] SMBCHG: usb_icl: votes unchanged; skipping
2575<6>[ 69.391888 / 01-03 15:39:16.769][2] SMBCHG: smbchg_stay_awake: staying awake: 0x02 (bit 2)
2576<6>[ 69.391924 / 01-03 15:39:16.769][2] SMBCHG: smbchg_vfloat_adjust_check: Starting vfloat adjustments
2577<6>[ 69.392006 / 01-03 15:39:16.769][2] SMBCHG: smbchg_relax: relaxing: 0x00 (bit 2)
2578<6>[ 69.407045 / 01-03 15:39:16.779][2] SMBCHG: usbin_uv_handler: chip->usb_present = 1 rt_sts = 0x04 hvdcp_3_det_ignore_uv = 0 aicl = 1700
2579<6>[ 69.407081 / 01-03 15:39:16.779][3] SMBCHG: power_ok_handler: triggered: 0x01
2580<6>[ 69.434831 / 01-03 15:39:16.819][2] SMBCHG: usbin_uv_handler: chip->usb_present = 1 rt_sts = 0x05 hvdcp_3_det_ignore_uv = 0 aicl = 1700
2581<6>[ 69.434860 / 01-03 15:39:16.819][3] SMBCHG: power_ok_handler: triggered: 0x00
2582<6>[ 69.436363 / 01-03 15:39:16.819][2] SMBCHG: usbin_uv_handler: Very weak charger detected. VBUS[4881]
2583<6>[ 69.436420 / 01-03 15:39:16.819][2] SMBCHG: usbin_uv_handler: could not get current_max mode, rc=-22
2584<6>[ 69.436484 / 01-03 15:39:16.819][2] SMBCHG: usbin_uv_handler: usb_type[SDP], current_max_mode[0]
2585<3>[ 69.436514 / 01-03 15:39:16.819][2] SMBCHG: usbin_uv_handler: could not disable charger: -22
2586<6>[ 69.436618 / 01-03 15:39:16.819][2] dwc3_msm_power_get_property_usb: POWER_SUPPLY_PROP_VOLTAGE_NOW
2587<3>[ 69.439540 / 01-03 15:39:16.819][2] vote: name[SMBCHG: battchg_suspend], client_id[1], state[0], val[0]
2588<7>[ 69.439578 / 01-03 15:39:16.819][2] SMBCHG: battchg_suspend: votes unchanged; skipping
2589<3>[ 69.439636 / 01-03 15:39:16.819][2] SMBCHG: smbchg_config_chg_battery_type: BATTERY FULL NAME : LGE_BL44E1F_LGC_3200mAh
2590<3>[ 69.439721 / 01-03 15:39:16.819][2] vote: name[SMBCHG: usb_icl], client_id[0], state[1], val[500]
2591<7>[ 69.439753 / 01-03 15:39:16.819][2] SMBCHG: usb_icl: votes unchanged; skipping
2592<6>[ 69.439784 / 01-03 15:39:16.819][2] SMBCHG: smbchg_stay_awake: staying awake: 0x02 (bit 2)
2593<6>[ 69.439819 / 01-03 15:39:16.819][2] SMBCHG: smbchg_vfloat_adjust_check: Starting vfloat adjustments
2594<6>[ 69.439899 / 01-03 15:39:16.819][2] SMBCHG: smbchg_relax: relaxing: 0x00 (bit 2)
2595<6>[ 69.455061 / 01-03 15:39:16.839][2] SMBCHG: usbin_uv_handler: chip->usb_present = 1 rt_sts = 0x04 hvdcp_3_det_ignore_uv = 0 aicl = 1700
2596<6>[ 69.455091 / 01-03 15:39:16.839][3] SMBCHG: power_ok_handler: triggered: 0x01
2597<6>[ 69.492968 / 01-03 15:39:16.879][2] SMBCHG: usbin_uv_handler: chip->usb_present = 1 rt_sts = 0x05 hvdcp_3_det_ignore_uv = 0 aicl = 1700
2598<6>[ 69.492996 / 01-03 15:39:16.879][3] SMBCHG: power_ok_handler: triggered: 0x00
2599<6>[ 69.494494 / 01-03 15:39:16.879][2] SMBCHG: usbin_uv_handler: Very weak charger detected. VBUS[4882]
2600<6>[ 69.494551 / 01-03 15:39:16.879][2] SMBCHG: usbin_uv_handler: could not get current_max mode, rc=-22
2601<6>[ 69.494613 / 01-03 15:39:16.879][2] SMBCHG: usbin_uv_handler: usb_type[SDP], current_max_mode[0]
2602<3>[ 69.494644 / 01-03 15:39:16.879][2] SMBCHG: usbin_uv_handler: could not disable charger: -22
2603<6>[ 69.494746 / 01-03 15:39:16.879][2] dwc3_msm_power_get_property_usb: POWER_SUPPLY_PROP_VOLTAGE_NOW
2604<3>[ 69.497662 / 01-03 15:39:16.879][2] vote: name[SMBCHG: battchg_suspend], client_id[1], state[0], val[0]
2605<7>[ 69.497700 / 01-03 15:39:16.879][2] SMBCHG: battchg_suspend: votes unchanged; skipping
2606<3>[ 69.497757 / 01-03 15:39:16.879][2] SMBCHG: smbchg_config_chg_battery_type: BATTERY FULL NAME : LGE_BL44E1F_LGC_3200mAh
2607<3>[ 69.497844 / 01-03 15:39:16.879][2] vote: name[SMBCHG: usb_icl], client_id[0], state[1], val[500]
2608<7>[ 69.497875 / 01-03 15:39:16.879][2] SMBCHG: usb_icl: votes unchanged; skipping
2609<6>[ 69.497905 / 01-03 15:39:16.879][2] SMBCHG: smbchg_stay_awake: staying awake: 0x02 (bit 2)
2610<6>[ 69.497941 / 01-03 15:39:16.879][2] SMBCHG: smbchg_vfloat_adjust_check: Starting vfloat adjustments
2611<6>[ 69.498020 / 01-03 15:39:16.879][2] SMBCHG: smbchg_relax: relaxing: 0x00 (bit 2)
2612<6>[ 69.513183 / 01-03 15:39:16.889][2] SMBCHG: usbin_uv_handler: chip->usb_present = 1 rt_sts = 0x04 hvdcp_3_det_ignore_uv = 0 aicl = 1700
2613<6>[ 69.513212 / 01-03 15:39:16.889][3] SMBCHG: power_ok_handler: triggered: 0x01
2614<6>[ 69.793734 / 01-03 15:39:17.179][2] SMBCHG: usbin_uv_handler: chip->usb_present = 1 rt_sts = 0x05 hvdcp_3_det_ignore_uv = 0 aicl = 1700
2615<6>[ 69.793764 / 01-03 15:39:17.179][3] SMBCHG: power_ok_handler: triggered: 0x00
2616<6>[ 69.795268 / 01-03 15:39:17.179][2] SMBCHG: usbin_uv_handler: Very weak charger detected. VBUS[4902]
2617<6>[ 69.795324 / 01-03 15:39:17.179][2] SMBCHG: usbin_uv_handler: could not get current_max mode, rc=-22
2618<6>[ 69.795386 / 01-03 15:39:17.179][2] SMBCHG: usbin_uv_handler: usb_type[SDP], current_max_mode[0]
2619<3>[ 69.795417 / 01-03 15:39:17.179][2] SMBCHG: usbin_uv_handler: could not disable charger: -22
2620<6>[ 69.795521 / 01-03 15:39:17.179][2] dwc3_msm_power_get_property_usb: POWER_SUPPLY_PROP_VOLTAGE_NOW
2621<3>[ 69.798435 / 01-03 15:39:17.179][2] vote: name[SMBCHG: battchg_suspend], client_id[1], state[0], val[0]
2622<7>[ 69.798471 / 01-03 15:39:17.179][2] SMBCHG: battchg_suspend: votes unchanged; skipping
2623<3>[ 69.798528 / 01-03 15:39:17.179][2] SMBCHG: smbchg_config_chg_battery_type: BATTERY FULL NAME : LGE_BL44E1F_LGC_3200mAh
2624<3>[ 69.798615 / 01-03 15:39:17.179][2] vote: name[SMBCHG: usb_icl], client_id[0], state[1], val[500]
2625<7>[ 69.798646 / 01-03 15:39:17.179][2] SMBCHG: usb_icl: votes unchanged; skipping
2626<6>[ 69.798677 / 01-03 15:39:17.179][2] SMBCHG: smbchg_stay_awake: staying awake: 0x02 (bit 2)
2627<6>[ 69.798714 / 01-03 15:39:17.179][2] SMBCHG: smbchg_vfloat_adjust_check: Starting vfloat adjustments
2628<6>[ 69.798792 / 01-03 15:39:17.179][2] SMBCHG: smbchg_relax: relaxing: 0x00 (bit 2)
2629<6>[ 69.813938 / 01-03 15:39:17.189][2] SMBCHG: usbin_uv_handler: chip->usb_present = 1 rt_sts = 0x04 hvdcp_3_det_ignore_uv = 0 aicl = 1700
2630<6>[ 69.813968 / 01-03 15:39:17.189][3] SMBCHG: power_ok_handler: triggered: 0x01