· 8 years ago · Dec 17, 2017, 11:52 AM
1sh-3.2# dmesg
2[ 0.000000] Initializing cgroup subsys cpuset
3[ 0.000000] Initializing cgroup subsys cpu
4[ 0.000000] Initializing cgroup subsys cpuacct
5[ 0.000000] Initializing cgroup subsys schedtune
6[ 0.000000] Linux version 3.18.31-lineage-g306200f-dirty (shenoy1001@instance-1) (gcc version 4.9 20150123 (prerelease) (GCC) ) #2 SMP PREEMPT Sat Dec 16 15:08:18 UTC 2017
7[ 0.000000] CPU: AArch64 Processor [511f2112] revision 2
8[ 0.000000] alternatives: detected feature GIC system register CPU interface
9[ 0.000000] Machine: Letv Technologies, Inc. MSM 8996 v3 + PMI8996 LE_X2-PVT
10[ 0.000000] efi: Getting EFI parameters from FDT:
11[ 0.000000] efi: UEFI not found.
12[ 0.000000] Reserved memory: reserved region for node 'removed_regions@85800000': base 0x0000000085800000, size 48 MiB
13[ 0.000000] Reserved memory: reserved region for node 'peripheral_region@8ea00000': base 0x000000008ea00000, size 43 MiB
14[ 0.000000] Reserved memory: reserved region for node 'modem_region@88800000': base 0x0000000088800000, size 98 MiB
15[ 0.000000] Reserved memory: reserved region for node 'dfps_data_mem@83400000': base 0x0000000083400000, size 0 MiB
16[ 0.000000] Reserved memory: reserved region for node 'cont_splash_mem@83401000': base 0x0000000083401000, size 35 MiB
17[ 0.000000] Reserved memory: reserved region for node 'cont_splash_mem_hdmi@b1c00000': base 0x00000000b1c00000, size 35 MiB
18[ 0.000000] Reserved memory: reserved region for node 'ramoops_region@91500000': base 0x0000000091500000, size 1 MiB
19[ 0.000000] Removed memory: created DMA memory pool at 0x0000000085800000, size 48 MiB
20[ 0.000000] Reserved memory: initialized node removed_regions@85800000, compatible id removed-dma-pool
21[ 0.000000] Removed memory: created DMA memory pool at 0x000000008ea00000, size 43 MiB
22[ 0.000000] Reserved memory: initialized node peripheral_region@8ea00000, compatible id removed-dma-pool
23[ 0.000000] Reserved memory: allocated memory for 'adsp_region' node: base 0x00000000ff800000, size 4 MiB
24[ 0.000000] Reserved memory: created CMA memory pool at 0x00000000ff800000, size 4 MiB
25[ 0.000000] Reserved memory: initialized node adsp_region, compatible id shared-dma-pool
26[ 0.000000] Reserved memory: allocated memory for 'qseecom_region' node: base 0x00000000fe400000, size 20 MiB
27[ 0.000000] Reserved memory: created CMA memory pool at 0x00000000fe400000, size 20 MiB
28[ 0.000000] Reserved memory: initialized node qseecom_region, compatible id shared-dma-pool
29[ 0.000000] Reserved memory: allocated memory for 'secure_region' node: base 0x00000000f8800000, size 92 MiB
30[ 0.000000] Reserved memory: created CMA memory pool at 0x00000000f8800000, size 92 MiB
31[ 0.000000] Reserved memory: initialized node secure_region, compatible id shared-dma-pool
32[ 0.000000] Removed memory: created DMA memory pool at 0x0000000088800000, size 98 MiB
33[ 0.000000] Reserved memory: initialized node modem_region@88800000, compatible id removed-dma-pool
34[ 0.000000] Reserved memory: created DMA memory pool at 0x0000000083400000, size 0 MiB
35[ 0.000000] Reserved memory: initialized node dfps_data_mem@83400000, compatible id shared-dma-pool
36[ 0.000000] Reserved memory: created DMA memory pool at 0x0000000091500000, size 1 MiB
37[ 0.000000] Reserved memory: initialized node ramoops_region@91500000, compatible id shared-dma-pool
38[ 0.000000] cma: Reserved 32 MiB at 0x00000000f6800000
39[ 0.000000] On node 0 totalpages: 993103
40[ 0.000000] DMA zone: 7432 pages used for memmap
41[ 0.000000] DMA zone: 0 pages reserved
42[ 0.000000] DMA zone: 475647 pages, LIFO batch:31
43[ 0.000000] Normal zone: 8086 pages used for memmap
44[ 0.000000] Normal zone: 517456 pages, LIFO batch:31
45[ 0.000000] psci: probing for conduit method from DT.
46[ 0.000000] psci: PSCIv1.0 detected in firmware.
47[ 0.000000] psci: Using standard PSCI v0.2 function IDs
48[ 0.000000] psci: Initializing psci_cpu_init
49[ 0.000000] psci: Initializing psci_cpu_init
50[ 0.000000] psci: Initializing psci_cpu_init
51[ 0.000000] PERCPU: Embedded 13 pages/cpu @ffffffc0fe2ce000 s20544 r0 d32704 u53248
52[ 0.000000] pcpu-alloc: s20544 r0 d32704 u53248 alloc=13*4096
53[ 0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3
54[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 977585
55[ 0.000000] Kernel command line: console=ttyHSL0,115200,n8 androidboot.console=ttyHSL0 androidboot.hardware=qcom user_debug=31 msm_rtb.filter=0x237 ehci-hcd.park=3 lpm_levels.sleep_disabled=1 cma=32M@0-0xffffffff androidboot.bootdevice=624000.ufshc androidboot.verifiedbootstate=orange androidboot.veritymode=enforcing androidboot.serialno=650d1b68 androidboot.baseband=msm mdss_mdp.panel=1:dsi:0:qcom,mdss_dsi_sharp_qhd_dualdsi_cmd_le_x2:1:qcom,mdss_dsi_sharp_qhd_dualdsi_cmd_le_x2:cfg:split_dsi android.letv.product=le_x2 android.letv.hardware_version=pvt android.letv.spec_charseq=5A:A9:82 android.letv.secureboot=enable
56[ 0.000000] log_buf_len individual max cpu contribution: 32768 bytes
57[ 0.000000] log_buf_len total cpu_extra contributions: 98304 bytes
58[ 0.000000] log_buf_len min size: 131072 bytes
59[ 0.000000] log_buf_len: 262144 bytes
60[ 0.000000] early log buf free: 125812(95%)
61[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
62[ 0.000000] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
63[ 0.000000] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
64[ 0.000000] Memory: 3644672K/3972412K available (14319K kernel code, 1795K rwdata, 7096K rodata, 492K init, 3026K bss, 327740K reserved)
65[ 0.000000] Virtual kernel memory layout:
66 vmalloc : 0xffffff8000000000 - 0xffffffbdbfff0000 ( 246 GB)
67 vmemmap : 0xffffffbdc0000000 - 0xffffffbfc0000000 ( 8 GB maximum)
68 0xffffffbdc0000000 - 0xffffffbdc3f95400 ( 63 MB actual)
69 PCI I/O : 0xffffffbffa000000 - 0xffffffbffb000000 ( 16 MB)
70 fixed : 0xffffffbffbdfd000 - 0xffffffbffbdff000 ( 8 KB)
71 modules : 0xffffffbffc000000 - 0xffffffc000000000 ( 64 MB)
72 memory : 0xffffffc000000000 - 0xffffffc0fe550000 ( 4069 MB)
73 .init : 0xffffffc00156c000 - 0xffffffc0015e7000 ( 492 KB)
74 .text : 0xffffffc000080000 - 0xffffffc00156bd64 ( 21424 KB)
75 .data : 0xffffffc001604000 - 0xffffffc0017c4e00 ( 1796 KB)
76[ 0.000000] SLUB: HWalign=128, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
77[ 0.000000] Preemptible hierarchical RCU implementation.
78[ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
79[ 0.000000] NR_IRQS:64 nr_irqs:64 0
80[ 0.000000] CPU0: found redistributor 0 region 0:0x0000000009c00000
81[ 0.000000] mpm_init_irq_domain(): Cannot find irq controller for qcom,gpio-parent
82[ 0.000000] MPM 1 irq mapping errored -517
83[ 0.000000] Architected cp15 and mmio timer(s) running at 19.20MHz (virt/virt).
84[ 0.000004] sched_clock: 56 bits at 19MHz, resolution 52ns, wraps every 3579139424256ns
85[ 0.000017] Switched to clocksource arch_sys_counter
86[ 0.000771] Console: colour dummy device 80x25
87[ 0.000789] Calibrating delay loop (skipped), value calculated using timer frequency.. 38.00 BogoMIPS (lpj=64000)
88[ 0.000798] pid_max: default: 32768 minimum: 301
89[ 0.000851] Security Framework initialized
90[ 0.000883] Mount-cache hash table entries: 8192 (order: 4, 65536 bytes)
91[ 0.000890] Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes)
92[ 0.001301] Initializing cgroup subsys devices
93[ 0.001313] Initializing cgroup subsys freezer
94[ 0.001321] Initializing cgroup subsys net_cls
95[ 0.001330] Initializing cgroup subsys blkio
96[ 0.001337] Initializing cgroup subsys bfqio
97[ 0.001346] Initializing cgroup subsys perf_event
98[ 0.001639] sched-energy: Sched-energy-costs installed from DT
99[ 0.001646] CPU0: update cpu_capacity 941
100[ 0.001675] hw perfevents: enabled with arm/armv8-pmuv3 PMU driver, 9 counters available
101[ 0.001696] EFI services will not be available.
102[ 0.002526] NOHZ: local_softirq_pending 02
103[ 0.003362] NOHZ: local_softirq_pending 02
104[ 0.019037]
105 **********************************************************
106[ 0.019046] ** NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE **
107[ 0.019050] ** **
108[ 0.019054] ** trace_printk() being used. Allocating extra memory. **
109[ 0.019058] ** **
110[ 0.019062] ** This means that this is a DEBUG kernel and it is **
111[ 0.019066] ** unsafe for produciton use. **
112[ 0.019070] ** **
113[ 0.019073] ** If you see this message and you are not debugging **
114[ 0.019077] ** the kernel, report this immediately to your vendor! **
115[ 0.019081] ** **
116[ 0.019084] ** NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE **
117[ 0.019088] **********************************************************
118[ 0.021080] MSM Memory Dump base table set up
119[ 0.021101] MSM Memory Dump apps data table set up
120[ 0.021123] hyp_assign_table is not functional as qcom_secure_mem is not allocated.
121[ 0.022796] clock-cpu-8996: configuring clocks for the perf cluster
122[ 0.022946] cpu_clock_8996_early_init: finished CPU clock configuration
123[ 0.031126] CPU1: update cpu_capacity 941
124[ 0.031139] CPU1: found redistributor 1 region 0:0x0000000009c40000
125[ 0.042598] CPU2: update cpu_capacity 1024
126[ 0.042628] CPU2: found redistributor 100 region 0:0x0000000009c80000
127[ 0.053907] CPU3: update cpu_capacity 1024
128[ 0.053919] CPU3: found redistributor 101 region 0:0x0000000009cc0000
129[ 0.054029] Brought up 4 CPUs
130[ 0.054052] SMP: Total of 4 processors activated.
131[ 0.054187] CPU3: update max cpu_capacity 1024
132[ 0.056710] CPU3: update max cpu_capacity 1024
133[ 0.058367] devtmpfs: initialized
134[ 0.063833] DMI not present or invalid.
135[ 0.074726] pinctrl core: initialized pinctrl subsystem
136[ 0.075083] regulator-dummy: no parameters
137[ 0.140798] NET: Registered protocol family 16
138[ 0.141874] schedtune: init normalization constants...
139[ 0.141886] schedtune: CLUSTER[ffffffc0f933fa20] min_pwr: 0 max_pwr: 67
140[ 0.141895] schedtune: CPU[0] min_pwr: 0 max_pwr: 1661
141[ 0.141903] schedtune: CPU[1] min_pwr: 0 max_pwr: 1661
142[ 0.141912] schedtune: CLUSTER[ffffffc0f933fc20] min_pwr: 0 max_pwr: 96
143[ 0.141920] schedtune: CPU[2] min_pwr: 0 max_pwr: 1715
144[ 0.141928] schedtune: CPU[3] min_pwr: 0 max_pwr: 1715
145[ 0.141934] schedtune: SYSTEM min_pwr: 0 max_pwr: 6915
146[ 0.141941] schedtune: using normalization constants mul: 793155928 sh1: 1 sh2: 12
147[ 0.141947] schedtune: verify normalization constants...
148[ 0.141953] schedtune: max_pwr/2^0: 6915 => norm_pwr: 1024
149[ 0.141960] schedtune: max_pwr/2^1: 3457 => norm_pwr: 511
150[ 0.141965] schedtune: max_pwr/2^2: 1728 => norm_pwr: 255
151[ 0.141971] schedtune: max_pwr/2^3: 864 => norm_pwr: 127
152[ 0.141977] schedtune: max_pwr/2^4: 432 => norm_pwr: 63
153[ 0.141983] schedtune: max_pwr/2^5: 216 => norm_pwr: 31
154[ 0.141989] schedtune: configured to support 5 boost groups
155[ 0.153414] cpuidle: using governor ladder
156[ 0.166730] cpuidle: using governor menu
157[ 0.180070] cpuidle: using governor qcom
158[ 0.181058] vdso: 2 pages (1 code @ ffffffc001609000, 1 data @ ffffffc001608000)
159[ 0.181508] software IO TLB [mem 0xffc00000-0x100000000] (4MB) mapped at [ffffffc07fc00000-ffffffc07fffffff]
160[ 0.182288] DMA: preallocated 256 KiB pool for atomic allocations
161[ 0.190271] platform 994400.qcom,mdss_dsi_pll: assigned reserved memory node dfps_data_mem@83400000
162[ 0.200420] qcom,msm-apm 99e0000.apm: overriding clock sources across APM switch
163[ 0.201491] sps:sps is ready.
164[ 0.202195] i2c-msm-v2 75ba000.i2c: could not find pctldev for node /soc/pinctrl@01010000/i2c_12/i2c_12_active, deferring probe
165[ 0.202630] i2c-msm-v2 75b9000.i2c: could not find pctldev for node /soc/pinctrl@01010000/i2c_11/i2c_11_active, deferring probe
166[ 0.203527] i2c-msm-v2 757a000.i2c: could not find pctldev for node /soc/pinctrl@01010000/i2c_6/i2c_6_active, deferring probe
167[ 0.203969] i2c-msm-v2 75b5000.i2c: could not find pctldev for node /soc/pinctrl@01010000/i2c_7/i2c_7_active, deferring probe
168[ 0.204372] i2c-msm-v2 75b6000.i2c: could not find pctldev for node /soc/pinctrl@01010000/i2c_8/i2c_8_active, deferring probe
169[ 0.204778] i2c-msm-v2 75b7000.i2c: could not find pctldev for node /soc/pinctrl@01010000/i2c_9/i2c_9_active, deferring probe
170[ 0.205258] irq: no irq domain found for /soc/pinctrl@01010000 !
171[ 0.207028] cpu-clock-8996 6400000.qcom,cpu-clock-8996: resources init failed
172[ 0.286974] smd_channel_probe_now: allocation table not initialized
173[ 0.287264] smd_channel_probe_now: allocation table not initialized
174[ 0.287543] smd_channel_probe_now: allocation table not initialized
175[ 0.287812] smd_channel_probe_now: allocation table not initialized
176[ 0.288076] msm_watchdog 9830000.qcom,wdt: wdog absent resource not present
177[ 0.288400] msm_watchdog 9830000.qcom,wdt: MSM Watchdog Initialized
178[ 0.289153] msm_rpm_dev_probe: APSS-RPM communication over GLINK
179[ 0.297421] spmi_pmic_arb 400f000.qcom,spmi: PMIC Arb Version-2 0x20010000
180[ 0.299084] spmi_pmic_arb 400f000.qcom,spmi: missing property: qcom,pmic-arb-max-periph-interrupts
181[ 0.303902] pmi8994_s2: 400 <--> 1015 mV at 1000 mV normal idle
182[ 0.304611] platform 9300000.qcom,lpass: assigned reserved memory node peripheral_region@8ea00000
183[ 0.305147] platform ce0000.qcom,venus: assigned reserved memory node peripheral_region@8ea00000
184[ 0.306033] platform 1c00000.qcom,ssc: assigned reserved memory node peripheral_region@8ea00000
185[ 0.306843] platform 2080000.qcom,mss: assigned reserved memory node modem_region@88800000
186[ 0.309860] msm-thermal 70000.qcom,msm-thermal: msm_thermal:Failed reading node=/soc/qcom,msm-thermal, key=qcom,rpm-phase-resource-type err=-22. KTM continues
187[ 0.309881] msm-thermal 70000.qcom,msm-thermal: msm_thermal:Failed reading node=/soc/qcom,msm-thermal, key=qcom,gfx-sensor-id. err=-22. KTM continues
188[ 0.309900] msm-thermal 70000.qcom,msm-thermal: probe_vdd_mx:Failed reading node=/soc/qcom,msm-thermal, key=qcom,mx-restriction-temp. KTM continues
189[ 0.309914] msm-thermal 70000.qcom,msm-thermal: probe_psm:Failed reading node=/soc/qcom,msm-thermal, key=qcom,pmic-sw-mode-temp. err=-22. KTM continues
190[ 0.310085] msm_thermal:vdd_restriction_reg_init Defer regulator vdd-dig probe
191[ 0.310094] msm_thermal:probe_vdd_rstr Err regulator init. err:-517. KTM continues.
192[ 0.310105] msm-thermal 70000.qcom,msm-thermal: probe_vdd_rstr:Failed reading node=/soc/qcom,msm-thermal, key=qcom,max-freq-level. err=-517. KTM continues
193[ 0.310113] msm_thermal:msm_thermal_dev_probe Failed reading node=/soc/qcom,msm-thermal, key=qcom,online-hotplug-core. err:-517
194[ 0.315340] platform soc:qcom,msm-adsprpc-mem: assigned reserved memory node adsp_region
195[ 0.320658] msm_cache_erp64 6500000.qcom,cache_erp64: Registering for L1 error interrupts
196[ 0.320760] msm_cache_erp64 6500000.qcom,cache_erp64: Registering for L2 error interrupts
197[ 0.320918] msm_cache_erp64 6500000.qcom,cache_erp64: Registering for L3 error interrupts
198[ 0.321202] msm_m4m_erp 9a40000.qcom,m4m_erp64: Registering for M4M error interrupts
199[ 0.323072] apc0_pwrcl_mem_acc_corner: 0 <--> 0 mV
200[ 0.323902] smd_channel_probe_now: allocation table not initialized
201[ 0.324477] msm_rpm_trans_notify_state: glink config params: transport=(null), edge=rpm, name=rpm_requests
202[ 0.324599] apc1_perfcl_mem_acc_corner: 0 <--> 0 mV
203[ 0.325000] apcc_l3_mem_acc_corner: 0 <--> 0 mV
204[ 0.325318] gfx_mem_acc_corner: 0 <--> 0 mV
205[ 0.325731] kryo0-retention: 468 <--> 892 mV at 520 mV
206[ 0.325923] kryo0: 468 <--> 892 mV at 754 mV
207[ 0.326048] kryo_regulator_probe: kryo0: default LDO functional volt=754021 uV, LDO retention volt=521789 uV, Vref func=325285 + 4466*(val), cluster-num=0
208[ 0.326365] kryo1-retention: 468 <--> 892 mV at 520 mV
209[ 0.326555] kryo1: 468 <--> 892 mV at 754 mV
210[ 0.326673] kryo_regulator_probe: kryo1: default LDO functional volt=754021 uV, LDO retention volt=521789 uV, Vref func=325285 + 4466*(val), cluster-num=1
211[ 0.331853] platform soc:qcom,kgsl-hyp: assigned reserved memory node peripheral_region@8ea00000
212[ 0.333660] msm_mpm_dev_probe(): Cannot get clk resource for XO: -517
213[ 0.352404] platform soc:ramoops: assigned reserved memory node ramoops_region@91500000
214[ 0.352547] ramoops: ecc_info not configured
215[ 0.353839] console [pstore-1] enabled
216[ 0.354070] pstore: Registered ramoops as persistent store backend
217[ 0.354081] ramoops: attached 0x100000@0x91500000, ecc: 0/0
218[ 0.356560] __of_mpm_init(): MPM driver mapping exists
219[ 0.362095] i2c-msm-v2 75ba000.i2c: probing driver i2c-msm-v2
220[ 0.362212] i2c-msm-v2 75ba000.i2c: error on clk_get(core_clk):-517
221[ 0.362226] i2c-msm-v2 75ba000.i2c: error probe() failed with err:-517
222[ 0.362694] i2c-msm-v2 75b9000.i2c: probing driver i2c-msm-v2
223[ 0.362781] i2c-msm-v2 75b9000.i2c: error on clk_get(core_clk):-517
224[ 0.362793] i2c-msm-v2 75b9000.i2c: error probe() failed with err:-517
225[ 0.363198] i2c-msm-v2 757a000.i2c: probing driver i2c-msm-v2
226[ 0.363281] i2c-msm-v2 757a000.i2c: error on clk_get(core_clk):-517
227[ 0.363293] i2c-msm-v2 757a000.i2c: error probe() failed with err:-517
228[ 0.363819] i2c-msm-v2 75b5000.i2c: probing driver i2c-msm-v2
229[ 0.363906] i2c-msm-v2 75b5000.i2c: error on clk_get(core_clk):-517
230[ 0.363918] i2c-msm-v2 75b5000.i2c: error probe() failed with err:-517
231[ 0.364297] i2c-msm-v2 75b6000.i2c: probing driver i2c-msm-v2
232[ 0.364324] ------------[ cut here ]------------
233[ 0.364346] WARNING: CPU: 0 PID: 44 at ../../../../../../kernel/leeco/msm8996/include/linux/of.h:770 i2c_msm_rsrcs_process_dt+0x35c/0x380()
234[ 0.364359] CPU: 0 PID: 44 Comm: kworker/u8:1 Not tainted 3.18.31-lineage-g306200f-dirty #2
235[ 0.364367] Hardware name: Letv Technologies, Inc. MSM 8996 v3 + PMI8996 LE_X2-PVT (DT)
236[ 0.364384] Workqueue: deferwq deferred_probe_work_func
237[ 0.364396] Call trace:
238[ 0.364412] [<ffffffc000088854>] dump_backtrace+0x0/0x23c
239[ 0.364422] [<ffffffc000088aa4>] show_stack+0x14/0x1c
240[ 0.364435] [<ffffffc000e60a14>] dump_stack+0x88/0xac
241[ 0.364448] [<ffffffc0000a0bcc>] warn_slowpath_common+0x88/0xb0
242[ 0.364457] [<ffffffc0000a0ce8>] warn_slowpath_null+0x18/0x20
243[ 0.364466] [<ffffffc000744b38>] i2c_msm_rsrcs_process_dt+0x35c/0x380
244[ 0.364474] [<ffffffc0007464cc>] i2c_msm_probe+0xa8/0x5a4
245[ 0.364483] [<ffffffc00054c098>] platform_drv_probe+0x38/0x84
246[ 0.364493] [<ffffffc00054a988>] driver_probe_device+0xd4/0x224
247[ 0.364502] [<ffffffc00054ab04>] __device_attach+0x2c/0x4c
248[ 0.364511] [<ffffffc0005495dc>] bus_for_each_drv+0x70/0x8c
249[ 0.364521] [<ffffffc00054ac24>] device_attach+0x70/0x9c
250[ 0.364529] [<ffffffc0005497a0>] bus_probe_device+0x2c/0xa0
251[ 0.364539] [<ffffffc00054a3f4>] deferred_probe_work_func+0x74/0xa0
252[ 0.364551] [<ffffffc0000b5460>] process_one_work+0x25c/0x438
253[ 0.364560] [<ffffffc0000b5960>] worker_thread+0x324/0x440
254[ 0.364570] [<ffffffc0000ba4c4>] kthread+0xe0/0xe8
255[ 0.364596] ---[ end trace 512cdd210c7f88e8 ]---
256[ 0.364680] i2c-msm-v2 75b6000.i2c: error on clk_get(core_clk):-517
257[ 0.364692] i2c-msm-v2 75b6000.i2c: error probe() failed with err:-517
258[ 0.365167] i2c-msm-v2 75b7000.i2c: probing driver i2c-msm-v2
259[ 0.365256] i2c-msm-v2 75b7000.i2c: error on clk_get(core_clk):-517
260[ 0.365269] i2c-msm-v2 75b7000.i2c: error probe() failed with err:-517
261[ 0.365463] cpu-clock-8996 6400000.qcom,cpu-clock-8996: resources init failed
262[ 0.366347] pm8994_s1_corner: 0 <--> 0 mV at 0 mV normal idle
263[ 0.366878] pm8994_s1_floor_corner: 0 <--> 0 mV at 0 mV normal idle
264[ 0.367257] pm8994_s1_corner_ao: 0 <--> 0 mV at 0 mV normal idle
265[ 0.367674] pm8994_s2_corner: 0 <--> 0 mV at 0 mV normal idle
266[ 0.368043] pm8994_s2_corner_ao: 0 <--> 0 mV at 0 mV normal idle
267[ 0.368458] pm8994_s3: 1300 mV normal idle
268[ 0.368880] pm8994_s4: 1800 mV normal idle
269[ 0.369299] pm8994_s5: 2150 mV normal idle
270[ 0.369721] pm8994_s7: 800 mV normal idle
271[ 0.370184] pm8994_l1: 1000 mV normal idle
272[ 0.370621] pm8994_l2: 1250 mV normal idle
273[ 0.371427] pm8994_l3: 850 mV normal idle
274[ 0.371867] pm8994_l4: 1225 mV normal idle
275[ 0.372285] pm8994_l6: 1200 mV normal idle
276[ 0.372710] pm8994_l8: 1800 mV normal idle
277[ 0.373126] pm8994_l9: 1800 mV normal idle
278[ 0.373609] pm8994_l10: 1800 mV normal idle
279[ 0.374020] pm8994_l11: 1150 mV normal idle
280[ 0.374445] pm8994_l12: 1800 mV normal idle
281[ 0.375217] pm8994_l13: 1800 <--> 2950 mV at 2950 mV normal idle
282[ 0.375659] pm8994_l14: 1800 mV normal idle
283[ 0.376421] pm8994_l15: 1800 mV normal idle
284[ 0.376908] pm8994_l16: 2700 mV normal idle
285[ 0.377318] pm8994_l17: 2500 <--> 2800 mV at 2500 mV normal idle
286[ 0.377747] pm8994_l18: 2700 <--> 2900 mV at 2700 mV normal idle
287[ 0.378109] pm8994_l18_pin_ctrl: 2700 <--> 2900 mV at 2700 mV normal idle
288[ 0.378529] pm8994_l19: 3000 mV normal idle
289[ 0.378945] pm8994_l20: 2950 mV normal idle
290[ 0.379367] pm8994_l21: 2950 mV normal idle
291[ 0.379770] pm8994_l22: 3300 mV normal idle
292[ 0.380254] pm8994_l23: 2800 mV normal idle
293[ 0.380663] pm8994_l24: 3075 mV normal idle
294[ 0.381093] pm8994_l25: 1200 mV normal idle
295[ 0.381891] pm8994_l26_corner: 0 <--> 0 mV at 0 mV normal idle
296[ 0.382264] pm8994_l26_floor_corner: 0 <--> 0 mV at 0 mV normal idle
297[ 0.382689] pm8994_l27: 1000 <--> 1200 mV at 1000 mV normal idle
298[ 0.383109] pm8994_l28: 925 mV normal idle
299[ 0.384025] pm8994_l29: 2800 <--> 3050 mV at 2800 mV normal idle
300[ 0.384452] pm8994_l30: 1800 mV normal idle
301[ 0.384891] pm8994_l32: 1800 mV normal idle
302[ 0.385294] pm8994_lvs1: no parameters
303[ 0.385684] pm8994_lvs2: no parameters
304[ 0.386071] pmi8994_s1: 1025 mV normal idle
305[ 0.386493] pmi8994_boost_5v: no parameters
306[ 0.386668] qcom,rpm-smd-regulator soc:qcom,rpm-smd:rpm-regulator-bstb:regulator-bst: Failed to find supply parent
307[ 0.386838] rpm_vreg_device_probe: regulator_register failed: pmi8994_boost_5v, rc=-517
308[ 0.387161] pmi8994_boost_pin_ctrl: no parameters
309[ 0.387252] qcom,rpm-smd-regulator soc:qcom,rpm-smd:rpm-regulator-bstb:regulator-bst-pin-ctrl: Failed to find supply parent
310[ 0.387341] rpm_vreg_device_probe: regulator_register failed: pmi8994_boost_pin_ctrl, rc=-517
311[ 0.387705] pmi8994_boostbypass: 3150 <--> 3600 mV at 3150 mV normal idle
312[ 0.388044] pm8994_s11: 470 <--> 1140 mV at 905 mV normal idle
313[ 0.388257] pm8994_s11_avs_limit: 470 <--> 1140 mV
314[ 0.388353] spm_regulator_probe: name=pm8994_s11, range=LV, voltage=905000 uV, mode=AUTO, step rate=2400 uV/us
315[ 0.389284] msm-thermal 70000.qcom,msm-thermal: msm_thermal:Failed reading node=/soc/qcom,msm-thermal, key=qcom,rpm-phase-resource-type err=-22. KTM continues
316[ 0.389310] msm-thermal 70000.qcom,msm-thermal: msm_thermal:Failed reading node=/soc/qcom,msm-thermal, key=qcom,gfx-sensor-id. err=-22. KTM continues
317[ 0.389320] msm_thermal:sensor_mgr_init_threshold threshold id already initialized
318[ 0.389336] msm-thermal 70000.qcom,msm-thermal: probe_vdd_mx:Failed reading node=/soc/qcom,msm-thermal, key=qcom,mx-restriction-temp. KTM continues
319[ 0.389352] msm-thermal 70000.qcom,msm-thermal: probe_psm:Failed reading node=/soc/qcom,msm-thermal, key=qcom,pmic-sw-mode-temp. err=-22. KTM continues
320[ 0.389845] msm_thermal:vdd_restriction_reg_init Defer regulator vdd-gfx probe
321[ 0.389858] msm_thermal:probe_vdd_rstr Err regulator init. err:-517. KTM continues.
322[ 0.389873] msm-thermal 70000.qcom,msm-thermal: probe_vdd_rstr:Failed reading node=/soc/qcom,msm-thermal, key=qcom,max-freq-level. err=-517. KTM continues
323[ 0.389884] msm_thermal:msm_thermal_dev_probe Failed reading node=/soc/qcom,msm-thermal, key=qcom,online-hotplug-core. err:-517
324[ 0.390534] msm_mpm_dev_probe(): Cannot get clk resource for XO: -517
325[ 0.391086] i2c-msm-v2 75ba000.i2c: probing driver i2c-msm-v2
326[ 0.391181] i2c-msm-v2 75ba000.i2c: error on clk_get(core_clk):-517
327[ 0.391194] i2c-msm-v2 75ba000.i2c: error probe() failed with err:-517
328[ 0.391634] i2c-msm-v2 75b9000.i2c: probing driver i2c-msm-v2
329[ 0.391721] i2c-msm-v2 75b9000.i2c: error on clk_get(core_clk):-517
330[ 0.391734] i2c-msm-v2 75b9000.i2c: error probe() failed with err:-517
331[ 0.392138] i2c-msm-v2 757a000.i2c: probing driver i2c-msm-v2
332[ 0.392220] i2c-msm-v2 757a000.i2c: error on clk_get(core_clk):-517
333[ 0.392234] i2c-msm-v2 757a000.i2c: error probe() failed with err:-517
334[ 0.392656] i2c-msm-v2 75b5000.i2c: probing driver i2c-msm-v2
335[ 0.392737] i2c-msm-v2 75b5000.i2c: error on clk_get(core_clk):-517
336[ 0.392749] i2c-msm-v2 75b5000.i2c: error probe() failed with err:-517
337[ 0.393117] i2c-msm-v2 75b6000.i2c: probing driver i2c-msm-v2
338[ 0.393141] ------------[ cut here ]------------
339[ 0.393163] WARNING: CPU: 0 PID: 44 at ../../../../../../kernel/leeco/msm8996/include/linux/of.h:770 i2c_msm_rsrcs_process_dt+0x35c/0x380()
340[ 0.393177] CPU: 0 PID: 44 Comm: kworker/u8:1 Tainted: G W 3.18.31-lineage-g306200f-dirty #2
341[ 0.393185] Hardware name: Letv Technologies, Inc. MSM 8996 v3 + PMI8996 LE_X2-PVT (DT)
342[ 0.393203] Workqueue: deferwq deferred_probe_work_func
343[ 0.393215] Call trace:
344[ 0.393231] [<ffffffc000088854>] dump_backtrace+0x0/0x23c
345[ 0.393241] [<ffffffc000088aa4>] show_stack+0x14/0x1c
346[ 0.393254] [<ffffffc000e60a14>] dump_stack+0x88/0xac
347[ 0.393267] [<ffffffc0000a0bcc>] warn_slowpath_common+0x88/0xb0
348[ 0.393277] [<ffffffc0000a0ce8>] warn_slowpath_null+0x18/0x20
349[ 0.393286] [<ffffffc000744b38>] i2c_msm_rsrcs_process_dt+0x35c/0x380
350[ 0.393294] [<ffffffc0007464cc>] i2c_msm_probe+0xa8/0x5a4
351[ 0.393304] [<ffffffc00054c098>] platform_drv_probe+0x38/0x84
352[ 0.393314] [<ffffffc00054a988>] driver_probe_device+0xd4/0x224
353[ 0.393324] [<ffffffc00054ab04>] __device_attach+0x2c/0x4c
354[ 0.393333] [<ffffffc0005495dc>] bus_for_each_drv+0x70/0x8c
355[ 0.393343] [<ffffffc00054ac24>] device_attach+0x70/0x9c
356[ 0.393352] [<ffffffc0005497a0>] bus_probe_device+0x2c/0xa0
357[ 0.393361] [<ffffffc00054a3f4>] deferred_probe_work_func+0x74/0xa0
358[ 0.393374] [<ffffffc0000b5460>] process_one_work+0x25c/0x438
359[ 0.393383] [<ffffffc0000b5960>] worker_thread+0x324/0x440
360[ 0.393392] [<ffffffc0000ba4c4>] kthread+0xe0/0xe8
361[ 0.393470] ---[ end trace 512cdd210c7f88e9 ]---
362[ 0.393567] i2c-msm-v2 75b6000.i2c: error on clk_get(core_clk):-517
363[ 0.393579] i2c-msm-v2 75b6000.i2c: error probe() failed with err:-517
364[ 0.394069] i2c-msm-v2 75b7000.i2c: probing driver i2c-msm-v2
365[ 0.394156] i2c-msm-v2 75b7000.i2c: error on clk_get(core_clk):-517
366[ 0.394168] i2c-msm-v2 75b7000.i2c: error probe() failed with err:-517
367[ 0.394504] cpu-clock-8996 6400000.qcom,cpu-clock-8996: resources init failed
368[ 0.412898] qcom,gcc-8996 300000.qcom,gcc: Registered GCC clocks.
369[ 0.414013] vfe0_clk_src: set OPP pair(75000000 Hz: 3 uV) on a10000.qcom,vfe0
370[ 0.414035] vfe0_clk_src: set OPP pair(320000000 Hz: 5 uV) on a10000.qcom,vfe0
371[ 0.414046] vfe0_clk_src: set OPP pair(600000000 Hz: 7 uV) on a10000.qcom,vfe0
372[ 0.414386] vfe1_clk_src: set OPP pair(75000000 Hz: 3 uV) on a14000.qcom,vfe1
373[ 0.414400] vfe1_clk_src: set OPP pair(320000000 Hz: 5 uV) on a14000.qcom,vfe1
374[ 0.414411] vfe1_clk_src: set OPP pair(600000000 Hz: 7 uV) on a14000.qcom,vfe1
375[ 0.414770] cpp_clk_src: set OPP pair(100000000 Hz: 3 uV) on a04000.qcom,cpp
376[ 0.414785] cpp_clk_src: set OPP pair(480000000 Hz: 5 uV) on a04000.qcom,cpp
377[ 0.414795] cpp_clk_src: set OPP pair(640000000 Hz: 7 uV) on a04000.qcom,cpp
378[ 0.422974] qcom,mmsscc-8996 8c0000.qcom,mmsscc: Registered MMSS clocks.
379[ 0.424899] pmi8994_boost_5v: no parameters
380[ 0.425064] qcom,rpm-smd-regulator soc:qcom,rpm-smd:rpm-regulator-bstb:regulator-bst: Failed to find supply parent
381[ 0.425162] rpm_vreg_device_probe: regulator_register failed: pmi8994_boost_5v, rc=-517
382[ 0.425375] pmi8994_boost_pin_ctrl: no parameters
383[ 0.425439] qcom,rpm-smd-regulator soc:qcom,rpm-smd:rpm-regulator-bstb:regulator-bst-pin-ctrl: Failed to find supply parent
384[ 0.425527] rpm_vreg_device_probe: regulator_register failed: pmi8994_boost_pin_ctrl, rc=-517
385[ 0.426352] msm-thermal 70000.qcom,msm-thermal: msm_thermal:Failed reading node=/soc/qcom,msm-thermal, key=qcom,rpm-phase-resource-type err=-22. KTM continues
386[ 0.426374] msm-thermal 70000.qcom,msm-thermal: msm_thermal:Failed reading node=/soc/qcom,msm-thermal, key=qcom,gfx-sensor-id. err=-22. KTM continues
387[ 0.426384] msm_thermal:sensor_mgr_init_threshold threshold id already initialized
388[ 0.426400] msm-thermal 70000.qcom,msm-thermal: probe_vdd_mx:Failed reading node=/soc/qcom,msm-thermal, key=qcom,mx-restriction-temp. KTM continues
389[ 0.426415] msm-thermal 70000.qcom,msm-thermal: probe_psm:Failed reading node=/soc/qcom,msm-thermal, key=qcom,pmic-sw-mode-temp. err=-22. KTM continues
390[ 0.426662] msm_thermal:vdd_restriction_reg_init Defer regulator vdd-gfx probe
391[ 0.426674] msm_thermal:probe_vdd_rstr Err regulator init. err:-517. KTM continues.
392[ 0.426749] msm-thermal 70000.qcom,msm-thermal: probe_vdd_rstr:Failed reading node=/soc/qcom,msm-thermal, key=qcom,max-freq-level. err=-517. KTM continues
393[ 0.426761] msm_thermal:msm_thermal_dev_probe Failed reading node=/soc/qcom,msm-thermal, key=qcom,online-hotplug-core. err:-517
394[ 0.427331] cpr3_msm8996_hmss_read_fuse_data: apc0_pwrcl_corner: speed bin = 0
395[ 0.427344] cpr3_msm8996_hmss_read_fuse_data: apc0_pwrcl_corner: CPR fusing revision = 6
396[ 0.427354] cpr3_msm8996_hmss_read_fuse_data: apc0_pwrcl_corner: using redundant fuses = N
397[ 0.427363] cpr3_msm8996_hmss_read_fuse_data: apc0_pwrcl_corner: CPR limitation = none
398[ 0.427372] cpr3_msm8996_hmss_read_fuse_data: apc0_pwrcl_corner: CPR partial binning limitation = none
399[ 0.427383] cpr3_msm8996_hmss_read_fuse_data: apc0_pwrcl_corner: Retention voltage fuses: VDD_MX = 4, VDD_APCC = 4
400[ 0.427602] cpr3_hmss_kvreg_init: apc0_pwrcl_corner: LDO min headroom=150000 uV, LDO max headroom=470000 uV, LDO adj=0 uV, LDO mode=allowed, LDO retention=490000 uV
401[ 0.427821] cpr3_msm8996_hmss_calculate_open_loop_voltages: apc0_pwrcl_corner: fused MinSVS: open-loop= 585000 uV
402[ 0.427831] cpr3_msm8996_hmss_calculate_open_loop_voltages: apc0_pwrcl_corner: fused SVS: open-loop= 685000 uV
403[ 0.427839] cpr3_msm8996_hmss_calculate_open_loop_voltages: apc0_pwrcl_corner: fused NOM: open-loop= 795000 uV
404[ 0.427846] cpr3_msm8996_hmss_calculate_open_loop_voltages: apc0_pwrcl_corner: fused TURBO: open-loop= 950000 uV
405[ 0.427959] cpr3_msm8996_hmss_calculate_target_quotients: apc0_pwrcl_corner: fused MinSVS: quot[ 7]= 333
406[ 0.427969] cpr3_msm8996_hmss_calculate_target_quotients: apc0_pwrcl_corner: fused SVS: quot[ 7]= 505, quot_offset[ 7]= 165
407[ 0.427979] cpr3_msm8996_hmss_calculate_target_quotients: apc0_pwrcl_corner: fused NOM: quot[ 7]= 712, quot_offset[ 7]= 205
408[ 0.427988] cpr3_msm8996_hmss_calculate_target_quotients: apc0_pwrcl_corner: fused TURBO: quot[ 7]= 969, quot_offset[ 7]= 255
409[ 0.428156] cpr3_msm8996_hmss_read_fuse_data: apc0_cbf_corner: speed bin = 0
410[ 0.428165] cpr3_msm8996_hmss_read_fuse_data: apc0_cbf_corner: CPR fusing revision = 6
411[ 0.428175] cpr3_msm8996_hmss_read_fuse_data: apc0_cbf_corner: using redundant fuses = N
412[ 0.428185] cpr3_msm8996_hmss_read_fuse_data: apc0_cbf_corner: CPR limitation = none
413[ 0.428193] cpr3_msm8996_hmss_read_fuse_data: apc0_cbf_corner: CPR partial binning limitation = none
414[ 0.428204] cpr3_msm8996_hmss_read_fuse_data: apc0_cbf_corner: Retention voltage fuses: VDD_MX = 4, VDD_APCC = 4
415[ 0.428346] cpr3_msm8996_hmss_calculate_open_loop_voltages: apc0_cbf_corner: fused MinSVS: open-loop= 585000 uV
416[ 0.428355] cpr3_msm8996_hmss_calculate_open_loop_voltages: apc0_cbf_corner: fused SVS: open-loop= 685000 uV
417[ 0.428363] cpr3_msm8996_hmss_calculate_open_loop_voltages: apc0_cbf_corner: fused NOM: open-loop= 795000 uV
418[ 0.428371] cpr3_msm8996_hmss_calculate_open_loop_voltages: apc0_cbf_corner: fused TURBO: open-loop= 950000 uV
419[ 0.428421] cpr3_msm8996_hmss_calculate_target_quotients: apc0_cbf_corner: fused MinSVS: quot[ 7]= 333
420[ 0.428430] cpr3_msm8996_hmss_calculate_target_quotients: apc0_cbf_corner: fused SVS: quot[ 7]= 505, quot_offset[ 7]= 165
421[ 0.428439] cpr3_msm8996_hmss_calculate_target_quotients: apc0_cbf_corner: fused NOM: quot[ 7]= 712, quot_offset[ 7]= 205
422[ 0.428448] cpr3_msm8996_hmss_calculate_target_quotients: apc0_cbf_corner: fused TURBO: quot[ 7]= 969, quot_offset[ 7]= 255
423[ 0.428584] cpr3_msm8996_hmss_read_fuse_data: apc1_corner: speed bin = 0
424[ 0.428593] cpr3_msm8996_hmss_read_fuse_data: apc1_corner: CPR fusing revision = 6
425[ 0.428602] cpr3_msm8996_hmss_read_fuse_data: apc1_corner: using redundant fuses = N
426[ 0.428611] cpr3_msm8996_hmss_read_fuse_data: apc1_corner: CPR limitation = none
427[ 0.428620] cpr3_msm8996_hmss_read_fuse_data: apc1_corner: CPR partial binning limitation = none
428[ 0.428630] cpr3_msm8996_hmss_read_fuse_data: apc1_corner: Retention voltage fuses: VDD_MX = 4, VDD_APCC = 4
429[ 0.428850] cpr3_hmss_kvreg_init: apc1_corner: LDO min headroom=150000 uV, LDO max headroom=470000 uV, LDO adj=0 uV, LDO mode=allowed, LDO retention=490000 uV
430[ 0.429085] cpr3_msm8996_hmss_calculate_open_loop_voltages: apc1_corner: fused MinSVS: open-loop= 595000 uV
431[ 0.429094] cpr3_msm8996_hmss_calculate_open_loop_voltages: apc1_corner: fused SVS: open-loop= 645000 uV
432[ 0.429102] cpr3_msm8996_hmss_calculate_open_loop_voltages: apc1_corner: fused NOM: open-loop= 725000 uV
433[ 0.429110] cpr3_msm8996_hmss_calculate_open_loop_voltages: apc1_corner: fused TURBO: open-loop=1020000 uV
434[ 0.429254] cpr3_msm8996_hmss_calculate_target_quotients: apc1_corner: fused MinSVS: quot[ 7]= 356
435[ 0.429263] cpr3_msm8996_hmss_calculate_target_quotients: apc1_corner: fused SVS: quot[ 7]= 432, quot_offset[ 7]= 70
436[ 0.429272] cpr3_msm8996_hmss_calculate_target_quotients: apc1_corner: fused NOM: quot[ 7]= 584, quot_offset[ 7]= 150
437[ 0.429281] cpr3_msm8996_hmss_calculate_target_quotients: apc1_corner: fused TURBO: quot[ 7]=1075, quot_offset[ 7]= 490
438[ 0.429814] cpr3_regulator_init_ctrl: apcc: Default CPR mode = SW closed-loop
439[ 0.429961] apc0_pwrcl_corner: 0 <--> 0 mV at 0 mV
440[ 0.430320] apc0_cbf_corner: 0 <--> 0 mV at 0 mV
441[ 0.433877] cpr3_regulator_measure_aging: apcc: average quotient delta=14 (count=10)
442[ 0.433908] cpr3_regulator_aging_adjust: apcc: aging measurement successful; aging reference adjustment voltage=625 uV
443[ 0.434423] apc1_corner: 0 <--> 0 mV at 0 mV
444[ 0.436668] cpr3_msm8996_mmss_read_fuse_data: gfx_corner: CPR fusing revision = 4
445[ 0.436775] cpr3_msm8996_mmss_read_fuse_data: gfx_corner: CPR limitation = none
446[ 0.437105] cpr3_msm8996_mmss_calculate_open_loop_voltages: gfx_corner: fuse_corner[0] open-loop= 630000 uV
447[ 0.437115] cpr3_msm8996_mmss_calculate_open_loop_voltages: gfx_corner: fuse_corner[1] open-loop= 685000 uV
448[ 0.437123] cpr3_msm8996_mmss_calculate_open_loop_voltages: gfx_corner: fuse_corner[2] open-loop= 825000 uV
449[ 0.437131] cpr3_msm8996_mmss_calculate_open_loop_voltages: gfx_corner: fuse_corner[3] open-loop= 925000 uV
450[ 0.437313] cpr3_regulator_init_ctrl: gfx: Default CPR mode = closed-loop
451[ 0.437464] gfx_corner: 0 <--> 0 mV at 0 mV
452[ 0.442416] i2c-msm-v2 75ba000.i2c: probing driver i2c-msm-v2
453[ 0.442541] AXI: msm_bus_scale_register_client(): msm_bus_scale_register_client: Bus driver not ready.
454[ 0.442554] i2c-msm-v2 75ba000.i2c: msm_bus_scale_register_client(mstr-id:84):0 (not a problem)
455[ 0.443926] i2c-msm-v2 75b9000.i2c: probing driver i2c-msm-v2
456[ 0.444040] AXI: msm_bus_scale_register_client(): msm_bus_scale_register_client: Bus driver not ready.
457[ 0.444053] i2c-msm-v2 75b9000.i2c: msm_bus_scale_register_client(mstr-id:84):0 (not a problem)
458[ 0.444903] i2c-msm-v2 757a000.i2c: probing driver i2c-msm-v2
459[ 0.445015] AXI: msm_bus_scale_register_client(): msm_bus_scale_register_client: Bus driver not ready.
460[ 0.445027] i2c-msm-v2 757a000.i2c: msm_bus_scale_register_client(mstr-id:86):0 (not a problem)
461[ 0.446103] i2c-msm-v2 75b5000.i2c: probing driver i2c-msm-v2
462[ 0.446216] AXI: msm_bus_scale_register_client(): msm_bus_scale_register_client: Bus driver not ready.
463[ 0.446228] i2c-msm-v2 75b5000.i2c: msm_bus_scale_register_client(mstr-id:84):0 (not a problem)
464[ 0.447487] i2c-msm-v2 75b6000.i2c: probing driver i2c-msm-v2
465[ 0.447517] ------------[ cut here ]------------
466[ 0.447538] WARNING: CPU: 0 PID: 44 at ../../../../../../kernel/leeco/msm8996/include/linux/of.h:770 i2c_msm_rsrcs_process_dt+0x35c/0x380()
467[ 0.447551] CPU: 0 PID: 44 Comm: kworker/u8:1 Tainted: G W 3.18.31-lineage-g306200f-dirty #2
468[ 0.447559] Hardware name: Letv Technologies, Inc. MSM 8996 v3 + PMI8996 LE_X2-PVT (DT)
469[ 0.447576] Workqueue: deferwq deferred_probe_work_func
470[ 0.447587] Call trace:
471[ 0.447602] [<ffffffc000088854>] dump_backtrace+0x0/0x23c
472[ 0.447612] [<ffffffc000088aa4>] show_stack+0x14/0x1c
473[ 0.447625] [<ffffffc000e60a14>] dump_stack+0x88/0xac
474[ 0.447637] [<ffffffc0000a0bcc>] warn_slowpath_common+0x88/0xb0
475[ 0.447647] [<ffffffc0000a0ce8>] warn_slowpath_null+0x18/0x20
476[ 0.447656] [<ffffffc000744b38>] i2c_msm_rsrcs_process_dt+0x35c/0x380
477[ 0.447665] [<ffffffc0007464cc>] i2c_msm_probe+0xa8/0x5a4
478[ 0.447674] [<ffffffc00054c098>] platform_drv_probe+0x38/0x84
479[ 0.447684] [<ffffffc00054a988>] driver_probe_device+0xd4/0x224
480[ 0.447694] [<ffffffc00054ab04>] __device_attach+0x2c/0x4c
481[ 0.447704] [<ffffffc0005495dc>] bus_for_each_drv+0x70/0x8c
482[ 0.447713] [<ffffffc00054ac24>] device_attach+0x70/0x9c
483[ 0.447723] [<ffffffc0005497a0>] bus_probe_device+0x2c/0xa0
484[ 0.447733] [<ffffffc00054a3f4>] deferred_probe_work_func+0x74/0xa0
485[ 0.447745] [<ffffffc0000b5460>] process_one_work+0x25c/0x438
486[ 0.447754] [<ffffffc0000b5960>] worker_thread+0x324/0x440
487[ 0.447764] [<ffffffc0000ba4c4>] kthread+0xe0/0xe8
488[ 0.447772] ---[ end trace 512cdd210c7f88ea ]---
489[ 0.447880] AXI: msm_bus_scale_register_client(): msm_bus_scale_register_client: Bus driver not ready.
490[ 0.447892] i2c-msm-v2 75b6000.i2c: msm_bus_scale_register_client(mstr-id:84):0 (not a problem)
491[ 0.448989] i2c-msm-v2 75b7000.i2c: probing driver i2c-msm-v2
492[ 0.449102] AXI: msm_bus_scale_register_client(): msm_bus_scale_register_client: Bus driver not ready.
493[ 0.449115] i2c-msm-v2 75b7000.i2c: msm_bus_scale_register_client(mstr-id:84):0 (not a problem)
494[ 0.450286] cpu-clock-8996 6400000.qcom,cpu-clock-8996: using perf/pwr/cbf speed bin 0 and pvs_ver 0
495[ 0.453450] clock-cpu-8996: set OPP pair (307200000 Hz, 605000 uv) on cpu0
496[ 0.453493] clock-cpu-8996: set OPP pair (1593600000 Hz, 925000 uv) on cpu0
497[ 0.453512] clock-cpu-8996: set OPP pair (307200000 Hz, 605000 uv) on cpu1
498[ 0.453550] clock-cpu-8996: set OPP pair (1593600000 Hz, 925000 uv) on cpu1
499[ 0.453569] clock-cpu-8996: set OPP pair (307200000 Hz, 615000 uv) on cpu2
500[ 0.453621] clock-cpu-8996: set OPP pair (2150400000 Hz, 1005000 uv) on cpu2
501[ 0.453639] clock-cpu-8996: set OPP pair (307200000 Hz, 615000 uv) on cpu3
502[ 0.453856] clock-cpu-8996: set OPP pair (2150400000 Hz, 1005000 uv) on cpu3
503[ 0.454014] clock-cpu-8996: set OPP pair (307200000 Hz, 630000 uv) on soc:qcom,m4m
504[ 0.454230] clock-cpu-8996: set OPP pair (1593600000 Hz, 925000 uv) on soc:qcom,m4m
505[ 0.454888] qcom,gpucc-8996 8c0000.qcom,gpucc: using speed bin 0
506[ 0.455331] gfx3d_clk_src_v2: set OPP pair(133000000 Hz: 560000 uV) on b00000.qcom,kgsl-3d0
507[ 0.455359] gfx3d_clk_src_v2: set OPP pair(624000000 Hz: 925000 uV) on b00000.qcom,kgsl-3d0
508[ 0.456914] qcom,gpucc-8996 8c0000.qcom,gpucc: Registered GPU clocks.
509[ 0.457161] pmi8994_boost_5v: no parameters
510[ 0.457266] qcom,rpm-smd-regulator soc:qcom,rpm-smd:rpm-regulator-bstb:regulator-bst: Failed to find supply parent
511[ 0.457364] rpm_vreg_device_probe: regulator_register failed: pmi8994_boost_5v, rc=-517
512[ 0.457580] pmi8994_boost_pin_ctrl: no parameters
513[ 0.457649] qcom,rpm-smd-regulator soc:qcom,rpm-smd:rpm-regulator-bstb:regulator-bst-pin-ctrl: Failed to find supply parent
514[ 0.457734] rpm_vreg_device_probe: regulator_register failed: pmi8994_boost_pin_ctrl, rc=-517
515[ 0.458589] msm-thermal 70000.qcom,msm-thermal: msm_thermal:Failed reading node=/soc/qcom,msm-thermal, key=qcom,rpm-phase-resource-type err=-22. KTM continues
516[ 0.458611] msm-thermal 70000.qcom,msm-thermal: msm_thermal:Failed reading node=/soc/qcom,msm-thermal, key=qcom,gfx-sensor-id. err=-22. KTM continues
517[ 0.458621] msm_thermal:sensor_mgr_init_threshold threshold id already initialized
518[ 0.458637] msm-thermal 70000.qcom,msm-thermal: probe_vdd_mx:Failed reading node=/soc/qcom,msm-thermal, key=qcom,mx-restriction-temp. KTM continues
519[ 0.458653] msm-thermal 70000.qcom,msm-thermal: probe_psm:Failed reading node=/soc/qcom,msm-thermal, key=qcom,pmic-sw-mode-temp. err=-22. KTM continues
520[ 0.459101] msm_thermal:update_cpu_freq Unable to update policy for cpu:0. err:-19
521[ 0.459115] msm_thermal:update_cpu_freq Unable to update policy for cpu:2. err:-19
522[ 0.459126] msm_thermal:update_cpu_freq Unable to update policy for cpu:2. err:-19
523[ 0.459149] msm-thermal 70000.qcom,msm-thermal: probe_ocr:Failed reading node=/soc/qcom,msm-thermal, key=qcom,pmic-opt-curr-temp err:-22. KTM continues
524[ 0.460327] msm_thermal:update_cpu_freq Unable to update policy for cpu:0. err:-19
525[ 0.460391] msm_thermal:update_cpu_freq Unable to update policy for cpu:2. err:-19
526[ 0.460402] msm_thermal:update_cpu_freq Unable to update policy for cpu:2. err:-19
527[ 0.460668] pmi8994_boost_5v: no parameters
528[ 0.460806] qcom,rpm-smd-regulator soc:qcom,rpm-smd:rpm-regulator-bstb:regulator-bst: Failed to find supply parent
529[ 0.460904] rpm_vreg_device_probe: regulator_register failed: pmi8994_boost_5v, rc=-517
530[ 0.461123] pmi8994_boost_pin_ctrl: no parameters
531[ 0.461193] qcom,rpm-smd-regulator soc:qcom,rpm-smd:rpm-regulator-bstb:regulator-bst-pin-ctrl: Failed to find supply parent
532[ 0.461279] rpm_vreg_device_probe: regulator_register failed: pmi8994_boost_pin_ctrl, rc=-517
533[ 0.506679] KPI: Bootloader start count = 44137
534[ 0.506761] KPI: Bootloader end count = 82608
535[ 0.506769] KPI: Bootloader display count = 66812
536[ 0.506777] KPI: Bootloader load kernel count = 2774
537[ 0.506786] KPI: Kernel MPM timestamp = 108901
538[ 0.506793] KPI: Kernel MPM Clock frequency = 32768
539[ 0.506817] socinfo_print: v0.11, id=246, ver=3.1, raw_id=2375, raw_ver=4, hw_plat=8, hw_plat_ver=65536
540 accessory_chip=0, hw_plat_subtype=0, pmic_model=65545, pmic_die_revision=131072 foundry_id=3 serial_number=327591514 num_pmics=2
541[ 0.507120] gdsc_mmagic_bimc: no parameters
542[ 0.507985] rome_vreg: no parameters
543[ 0.508272] wlan_en_vreg: no parameters
544[ 0.509117] vgaarb: loaded
545[ 0.511026] SCSI subsystem initialized
546[ 0.511221] usbcore: registered new interface driver usbfs
547[ 0.511264] usbcore: registered new interface driver hub
548[ 0.511404] usbcore: registered new device driver usb
549[ 0.511931] soc:usb_nop_phy supply vcc not found, using dummy regulator
550[ 0.512859] media: Linux media interface: v0.10
551[ 0.512907] Linux video capture interface: v2.00
552[ 0.515353] cpufreq: driver msm up and running
553[ 0.516609] platform soc:qcom,ion:qcom,ion-heap@22: assigned reserved memory node adsp_region
554[ 0.517741] platform soc:qcom,ion:qcom,ion-heap@27: assigned reserved memory node qseecom_region
555[ 0.518825] platform soc:qcom,ion:qcom,ion-heap@10: assigned reserved memory node secure_region
556[ 0.519942] ION heap system created
557[ 0.520265] ION heap adsp created at 0x00000000ff800000 with size 400000
558[ 0.520277] ION heap qsecom created at 0x00000000fe400000 with size 1400000
559[ 0.520296] ION heap secure_display created at 0x00000000f8800000 with size 5c00000
560[ 0.520307] ION heap secure_heap created
561[ 0.521248] msm_bus_fabric_init_driver
562[ 0.526129] msm-bus-type fab-a0noc: Error: Failed to get regulator bus-gdsc:-517
563[ 0.526148] msm-bus-type fab-a0noc: Error: Failed to get regulator bus-a-gdsc:-517
564[ 0.529860] msm-bus-type slv-vmem-cfg: Error: Failed to get regulator node-gdsc:-517
565[ 0.530529] msm-bus-type slv-vmem: Error: Failed to get regulator node-gdsc:-517
566[ 0.538755] msm-bus-type fab-a0noc: Error: Failed to get regulator aggre0-snoc-axi-no-rate:-517
567[ 0.538775] msm-bus-type fab-a0noc: Error: Failed to get regulator aggre0-snoc-axi-no-rate:-517
568[ 0.538787] msm-bus-type fab-a0noc: Error: Failed to get regulator aggre0-snoc-axi-no-rate:-517
569[ 0.538917] msm-bus-type fab-mnoc: Error: Failed to get regulator mmagic-mdss-axi-no-rate:-517
570[ 0.538945] msm-bus-type fab-mnoc: Error: Failed to get regulator mmagic-mdss-axi-no-rate:-517
571[ 0.538969] msm-bus-type fab-mnoc: Error: Failed to get regulator mmagic-mdss-axi-no-rate:-517
572[ 0.538993] msm-bus-type fab-mnoc: Error: Failed to get regulator mmagic-mdss-axi-no-rate:-517
573[ 0.539016] msm-bus-type fab-mnoc: Error: Failed to get regulator mmagic-mdss-axi-no-rate:-517
574[ 0.539040] msm-bus-type fab-mnoc: Error: Failed to get regulator mmagic-mdss-axi-no-rate:-517
575[ 0.539064] msm-bus-type fab-mnoc: Error: Failed to get regulator mmagic-mdss-axi-no-rate:-517
576[ 0.540954] qcom,qpnp-power-on qpnp-power-on-2: PMIC@SID0 Power-on reason: Triggered from Hard Reset and 'cold' boot
577[ 0.540978] qcom,qpnp-power-on qpnp-power-on-2: PMIC@SID0: Power-off reason: Triggered from PS_HOLD (PS_HOLD/MSM controlled shutdown)
578[ 0.541178] input: qpnp_pon as /devices/virtual/input/input0
579[ 0.542157] pon_spare_reg: no parameters
580[ 0.542218] qcom,qpnp-power-on qpnp-power-on-12: No PON config. specified
581[ 0.542276] qcom,qpnp-power-on qpnp-power-on-12: PMIC@SID2 Power-on reason: Triggered from USB (USB charger insertion) and 'cold' boot
582[ 0.542293] qcom,qpnp-power-on qpnp-power-on-12: PMIC@SID2: Power-off reason: Triggered from PS_HOLD (PS_HOLD/MSM controlled shutdown)
583[ 0.542484] PMIC@SID0: PM8994 v2.0 options: 0, 0, 2, 2
584[ 0.542577] PMIC@SID2: PMI8996 v1.1 options: 0, 0, 0, 0
585[ 0.544284] ipa ipa2_uc_state_check:296 uC interface not initialized
586[ 0.544298] ipa ipa_sps_irq_control_all:938 EP (2) not allocated.
587[ 0.544303] ipa ipa_sps_irq_control_all:938 EP (5) not allocated.
588[ 0.546541] sps:BAM 0x0000000000684000 is registered.
589[ 0.547708] ipa ipa2_uc_state_check:296 uC interface not initialized
590[ 0.547978] sps:BAM 0x0000000000684000 (va:0xffffff80019c0000) enabled: ver:0x27, number of pipes:20
591[ 0.553562] ipa ipa2_uc_state_check:296 uC interface not initialized
592[ 0.560329] ipa ipa2_uc_state_check:296 uC interface not initialized
593[ 0.563330] IPA driver initialization was successful.
594[ 0.565037] gdsc_mmagic_video: no parameters
595[ 0.565416] gdsc_mmagic_mdss: no parameters
596[ 0.565710] gdsc_mmagic_camss: no parameters
597[ 0.566036] gdsc_venus: no parameters
598[ 0.566066] gdsc_venus: supplied by gdsc_mmagic_video
599[ 0.566384] gdsc_venus_core0: fast normal
600[ 0.566652] gdsc_venus_core1: fast normal
601[ 0.567147] gdsc_camss_top: no parameters
602[ 0.567179] gdsc_camss_top: supplied by gdsc_mmagic_camss
603[ 0.567486] gdsc_vfe0: no parameters
604[ 0.567512] gdsc_vfe0: supplied by gdsc_camss_top
605[ 0.567754] gdsc_vfe1: no parameters
606[ 0.567777] gdsc_vfe1: supplied by gdsc_camss_top
607[ 0.568071] gdsc_mdss: no parameters
608[ 0.568101] gdsc_mdss: supplied by gdsc_mmagic_mdss
609[ 0.568492] gdsc_jpeg: no parameters
610[ 0.568515] gdsc_jpeg: supplied by gdsc_camss_top
611[ 0.568816] gdsc_cpp: no parameters
612[ 0.568841] gdsc_cpp: supplied by gdsc_camss_top
613[ 0.569091] gdsc_pcie_0: no parameters
614[ 0.569264] gdsc_pcie_1: no parameters
615[ 0.569478] gdsc_pcie_2: no parameters
616[ 0.569645] gdsc_usb30: no parameters
617[ 0.569877] gdsc_ufs: no parameters
618[ 0.570413] gdsc_fd: no parameters
619[ 0.570454] gdsc_fd: supplied by gdsc_camss_top
620[ 0.570721] gdsc_gpu: no parameters
621[ 0.571022] gdsc_gpu_gx: no parameters
622[ 0.571454] gdsc_gpu_gx: supplied by gfx_corner
623[ 0.571840] gdsc_hlos1_vote_aggre0_noc: no parameters
624[ 0.572014] gdsc_hlos1_vote_lpass_adsp: no parameters
625[ 0.572220] gdsc_hlos1_vote_lpass_core: no parameters
626[ 0.572400] gdsc_aggre0_noc: no parameters
627[ 0.575381] mdss_pll_probe: MDSS pll label = MDSS DSI 0 PLL
628[ 0.575416] mdss_pll_probe: mdss_pll_probe: label=MDSS DSI 0 PLL PLL SSC enabled
629[ 0.577099] BUG: Bad page state in process swapper/0 pfn:83400
630[ 0.577127] page:ffffffbdc00d0000 count:0 mapcount:1 mapping: (null) index:0x0
631[ 0.577136] flags: 0x0()
632[ 0.577149] page dumped because: nonzero mapcount
633[ 0.577167] CPU: 1 PID: 1 Comm: swapper/0 Tainted: G W 3.18.31-lineage-g306200f-dirty #2
634[ 0.577176] Hardware name: Letv Technologies, Inc. MSM 8996 v3 + PMI8996 LE_X2-PVT (DT)
635[ 0.577187] Call trace:
636[ 0.577222] [<ffffffc000088854>] dump_backtrace+0x0/0x23c
637[ 0.577230] [<ffffffc000088aa4>] show_stack+0x14/0x1c
638[ 0.577251] [<ffffffc000e60a14>] dump_stack+0x88/0xac
639[ 0.577267] [<ffffffc000152d8c>] bad_page+0xf0/0x118
640[ 0.577274] [<ffffffc000152ed8>] free_pages_prepare+0x124/0x1a0
641[ 0.577285] [<ffffffc00015503c>] free_hot_cold_page+0x34/0x190
642[ 0.577293] [<ffffffc0001552d0>] __free_pages+0x30/0x40
643[ 0.577313] [<ffffffc000b929c4>] mdss_pll_util_resource_parse+0x624/0x690
644[ 0.577320] [<ffffffc000b92cb0>] mdss_pll_probe+0x248/0x6b0
645[ 0.577339] [<ffffffc00054c098>] platform_drv_probe+0x38/0x84
646[ 0.577357] [<ffffffc00054a988>] driver_probe_device+0xd4/0x224
647[ 0.577365] [<ffffffc00054ab88>] __driver_attach+0x64/0x90
648[ 0.577373] [<ffffffc0005491c8>] bus_for_each_dev+0x74/0x90
649[ 0.577382] [<ffffffc00054ac70>] driver_attach+0x20/0x28
650[ 0.577389] [<ffffffc000549a24>] bus_add_driver+0xf0/0x1c0
651[ 0.577396] [<ffffffc00054b664>] driver_register+0x94/0xe0
652[ 0.577406] [<ffffffc00054cac0>] __platform_driver_register+0x60/0x68
653[ 0.577429] [<ffffffc0015b62e4>] mdss_pll_driver_init+0x1c/0x48
654[ 0.577447] [<ffffffc00156cb14>] do_one_initcall+0x188/0x1a4
655[ 0.577455] [<ffffffc00156ccf0>] kernel_init_freeable+0x1c0/0x25c
656[ 0.577463] [<ffffffc000e5b83c>] kernel_init+0x14/0xd4
657[ 0.577470] Disabling lock debugging due to kernel taint
658[ 0.579240] dsi_pll_clock_register_8996: Registered DSI PLL ndx=0 clocks successfully
659[ 0.579377] mdss_pll_probe: MDSS pll label = MDSS DSI 1 PLL
660[ 0.579391] mdss_pll_probe: mdss_pll_probe: label=MDSS DSI 1 PLL PLL SSC enabled
661[ 0.580622] pll_is_pll_locked_8996: DSI PLL ndx=1 status=0 failed to Lock
662[ 0.581365] dsi_pll_clock_register_8996: Registered DSI PLL ndx=1 clocks successfully
663[ 0.581447] mdss_pll_probe: MDSS pll label = MDSS HDMI PLL
664[ 0.581459] mdss_pll_probe: Unable to get the cell-index rc=-22
665[ 0.607573] arm-smmu d80000.arm,smmu-jpeg: found 4 context interrupt(s) but have 3 context banks. assuming 3 context interrupts.
666[ 0.622576] arm-smmu b40000.arm,smmu-kgsl: found 4 context interrupt(s) but have 2 context banks. assuming 2 context interrupts.
667[ 0.638689] arm-smmu da0000.arm,smmu-vfe: found 4 context interrupt(s) but have 2 context banks. assuming 2 context interrupts.
668[ 0.654966] arm-smmu d40000.arm,smmu-venus: found 11 context interrupt(s) but have 7 context banks. assuming 7 context interrupts.
669[ 0.671296] arm-smmu d00000.arm,smmu-mdp: found 4 context interrupt(s) but have 2 context banks. assuming 2 context interrupts.
670[ 0.683721] arm-smmu d20000.arm,smmu-rot: found 4 context interrupt(s) but have 2 context banks. assuming 2 context interrupts.
671[ 0.695853] arm-smmu d60000.arm,smmu-cpp_fd: found 4 context interrupt(s) but have 3 context banks. assuming 3 context interrupts.
672[ 0.707316] arm-smmu 1600000.arm,smmu-lpass_q6: found 16 context interrupt(s) but have 12 context banks. assuming 12 context interrupts.
673[ 0.718677] arm-smmu 1640000.arm,smmu-anoc0: found 6 context interrupt(s) but have 7 context banks. assuming 7 context interrupts.
674[ 0.729572] arm-smmu 1660000.arm,smmu-anoc1: found 8 context interrupt(s) but have 4 context banks. assuming 4 context interrupts.
675[ 0.740540] arm-smmu 1680000.arm,smmu-anoc2: found 12 context interrupt(s) but have 8 context banks. assuming 8 context interrupts.
676[ 0.744011] Advanced Linux Sound Architecture Driver Initialized.
677[ 0.744943] Bluetooth: ffffffc0f989bd20
678[ 0.745004] NET: Registered protocol family 31
679[ 0.745016] Bluetooth: ffffffc0f989bd20
680[ 0.745032] Bluetooth: ffffffc0f989bd00
681[ 0.745046] Bluetooth: ffffffc0f989bcd0
682[ 0.745074] Bluetooth: ffffffc0f989bce0
683[ 0.745526] cfg80211: Calling CRDA to update world regulatory domain
684[ 0.745565] cfg80211: World regulatory domain updated:
685[ 0.745574] cfg80211: DFS Master region: unset
686[ 0.745582] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
687[ 0.745598] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
688[ 0.745605] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
689[ 0.745614] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A, 2000 mBm), (N/A)
690[ 0.745622] cfg80211: (5170000 KHz - 5250000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A)
691[ 0.745629] cfg80211: (5250000 KHz - 5330000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A)
692[ 0.745637] cfg80211: (5490000 KHz - 5710000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A)
693[ 0.745644] cfg80211: (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A)
694[ 0.745652] cfg80211: (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm), (N/A)
695[ 0.746203] pcie:pcie_init.
696[ 0.750411] 600000.qcom,pcie supply vreg-3.3 not found, using dummy regulator
697[ 0.754705] msm_pcie_get_resources: PCIe: RC0 can't get tcsr resource.
698[ 0.757610] 608000.qcom,pcie supply vreg-3.3 not found, using dummy regulator
699[ 0.762514] msm_pcie_get_resources: PCIe: RC1 can't get tcsr resource.
700[ 0.765705] 610000.qcom,pcie supply vreg-3.3 not found, using dummy regulator
701[ 0.771268] msm_pcie_get_resources: PCIe: RC2 can't get tcsr resource.
702[ 0.774346] pmi8994_boost_5v: no parameters
703[ 0.774888] pmi8994_boost_5v: supplied by pon_spare_reg
704[ 0.775404] pmi8994_boost_pin_ctrl: no parameters
705[ 0.775603] pmi8994_boost_pin_ctrl: supplied by pon_spare_reg
706[ 0.776128] ibb_reg: 4600 <--> 6000 mV at 5900 mV
707[ 0.776419] lab_reg: 4600 <--> 6000 mV at 5900 mV
708[ 0.777338] Switched to clocksource arch_sys_counter
709[ 0.823688] bcl_peripheral:bcl_perph_init BCL Initialized
710[ 0.829991] NET: Registered protocol family 2
711[ 0.831087] TCP established hash table entries: 32768 (order: 6, 262144 bytes)
712[ 0.831217] TCP bind hash table entries: 32768 (order: 7, 524288 bytes)
713[ 0.831865] TCP: Hash tables configured (established 32768 bind 32768)
714[ 0.832100] TCP: reno registered
715[ 0.832150] UDP hash table entries: 2048 (order: 4, 65536 bytes)
716[ 0.832211] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
717[ 0.832668] NET: Registered protocol family 1
718[ 0.832736] PCI: CLS 0 bytes, default 64
719[ 0.833595] Trying to unpack rootfs image as initramfs...
720[ 0.855085] Freeing initrd memory: 820K (ffffffc002200000 - ffffffc0022cd000)
721[ 0.857693] kryo perfevents: CPU pmu for kryo-pmuv3 detected
722[ 0.865951] futex hash table entries: 1024 (order: 4, 65536 bytes)
723[ 0.867199] vmscan: error setting kswapd cpu affinity mask
724[ 0.871295] VFS: Disk quotas dquot_6.5.2
725[ 0.871461] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
726[ 0.872537] Registering sdcardfs 0.1
727[ 0.873792] fuse init (API version 7.23)
728[ 0.874192] msgmni has been set to 7416
729[ 0.876673] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 246)
730[ 0.876784] io scheduler noop registered (default)
731[ 0.876797] io scheduler deadline registered
732[ 0.876890] io scheduler cfq registered
733[ 0.876901] io scheduler test-iosched registered
734[ 0.876987] io scheduler bfq registered
735[ 0.876995] BFQ I/O-scheduler: v7r8
736[ 0.897611] mdss_mdp_irq_clk_register: unable to get clk: lut_clk
737[ 0.899521] No change in context(0==0), skip
738[ 0.900743] mdss_mdp_pipe_addr_setup: type:0 ftchid:-1 xinid:0 num:0 rect:0 ndx:0x1 prio:0
739[ 0.900756] mdss_mdp_pipe_addr_setup: type:0 ftchid:-1 xinid:4 num:1 rect:0 ndx:0x2 prio:1
740[ 0.900763] mdss_mdp_pipe_addr_setup: type:0 ftchid:-1 xinid:8 num:2 rect:0 ndx:0x4 prio:2
741[ 0.900769] mdss_mdp_pipe_addr_setup: type:0 ftchid:-1 xinid:12 num:8 rect:0 ndx:0x100 prio:3
742[ 0.900794] mdss_mdp_pipe_addr_setup: type:1 ftchid:-1 xinid:1 num:3 rect:0 ndx:0x8 prio:4
743[ 0.900801] mdss_mdp_pipe_addr_setup: type:1 ftchid:-1 xinid:5 num:4 rect:0 ndx:0x10 prio:5
744[ 0.900807] mdss_mdp_pipe_addr_setup: type:1 ftchid:-1 xinid:9 num:5 rect:0 ndx:0x20 prio:6
745[ 0.900813] mdss_mdp_pipe_addr_setup: type:1 ftchid:-1 xinid:13 num:9 rect:0 ndx:0x200 prio:7
746[ 0.900831] mdss_mdp_pipe_addr_setup: type:2 ftchid:-1 xinid:2 num:6 rect:0 ndx:0x40 prio:8
747[ 0.900837] mdss_mdp_pipe_addr_setup: type:2 ftchid:-1 xinid:10 num:7 rect:0 ndx:0x80 prio:9
748[ 0.900855] mdss_mdp_pipe_addr_setup: type:3 ftchid:-1 xinid:7 num:10 rect:0 ndx:0x400 prio:0
749[ 0.900861] mdss_mdp_pipe_addr_setup: type:3 ftchid:-1 xinid:7 num:11 rect:0 ndx:0x800 prio:1
750[ 0.900871] mdss_mdp_parse_dt_handler: Error from prop qcom,mdss-pipe-sw-reset-off : u32 array read
751[ 0.900974] mdss_mdp_parse_dt_handler: Error from prop qcom,mdss-ib-factor-overlap : u32 array read
752[ 0.901479] xlog_status: enable:1, panic:1, dump:2
753[ 0.901791] OF: no ranges; cannot translate
754[ 0.901809] OF: no ranges; cannot translate
755[ 0.902593] OF: no ranges; cannot translate
756[ 0.902613] OF: no ranges; cannot translate
757[ 0.902992] OF: no ranges; cannot translate
758[ 0.903008] OF: no ranges; cannot translate
759[ 0.903475] OF: no ranges; cannot translate
760[ 0.903496] OF: no ranges; cannot translate
761[ 0.904150] mdss_mdp_probe: mdss version = 0x10070002, bootloader display is on, num 1, intf_sel=0x00010100
762[ 0.909711] mdss_smmu_probe: iommu v2 domain[0] mapping and clk register successful!
763[ 0.909902] mdss_smmu_probe: iommu v2 domain[1] mapping and clk register successful!
764[ 0.910100] mdss_smmu_probe: iommu v2 domain[2] mapping and clk register successful!
765[ 0.910240] mdss_smmu_probe: iommu v2 domain[3] mapping and clk register successful!
766[ 0.912852] mdss_dsi_ctrl_probe: DSI Ctrl name = MDSS DSI CTRL->0
767[ 0.913138] mdss_dsi_find_panel_of_node: cmdline:0:qcom,mdss_dsi_sharp_qhd_dualdsi_cmd_le_x2:1:qcom,mdss_dsi_sharp_qhd_dualdsi_cmd_le_x2:cfg:split_dsi panel_name:qcom,mdss_dsi_sharp_qhd_dualdsi_cmd_le_x2
768[ 0.913169] mdss_dsi_panel_init: Panel Name = le_x2_mdss_dsi_sharp_qhd_dualdsi_cmd
769[ 0.913246] mdss_dsi_panel_timing_from_dt: found new timing "qcom,mdss_dsi_sharp_qhd_dualdsi_cmd_le_x2" (ffffffc0f8715400)
770[ 0.913258] mdss_dsi_parse_dcs_cmds: failed, key=qcom,mdss-dsi-bist-on-command
771[ 0.913265] mdss_dsi_parse_dcs_cmds: failed, key=qcom,mdss-dsi-post-panel-on-command
772[ 0.913271] mdss_dsi_parse_dcs_cmds: failed, key=qcom,mdss-dsi-timing-switch-command
773[ 0.913277] mdss_dsi_panel_get_dsc_cfg_np: cannot find dsc config node:
774[ 0.913288] mdss_dsi_parse_topology_config: cfg_node name config0 lm_split:0x0 pp_split:yes
775[ 0.913446] mdss_dsi_parse_panel_features: ulps feature enabled
776[ 0.913454] mdss_dsi_parse_panel_features: ulps during suspend feature disabled
777[ 0.913461] mdss_dsi_parse_dms_config: dynamic switch feature enabled: 0
778[ 0.913927] 994000.qcom,mdss_dsi_ctrl0 supply vddio not found, using dummy regulator
779[ 0.914082] mdss_dsi_parse_ctrl_params:4001 Unable to read qcom,display-id, data=0000000000000000,len=20
780[ 0.914124] mdss_dsi_parse_gpio_params: bklt_en gpio not specified
781[ 0.914173] msm_dss_get_res_byname: 'dsi_phy_regulator' resource not found
782[ 0.914193] mdss_dsi_retrieve_ctrl_resources+0x164/0x1d4->msm_dss_ioremap_byname: 'dsi_phy_regulator' msm_dss_get_res_byname failed
783[ 0.914198] mdss_dsi_retrieve_ctrl_resources: ctrl_base=ffffff8001a50000 ctrl_size=400 phy_base=ffffff8001a52400 phy_size=588
784[ 0.914356] dsi_panel_device_register: Continuous splash enabled
785[ 0.914948] mdss_register_panel: adding framebuffer device 994000.qcom,mdss_dsi_ctrl0
786[ 0.915883] mdss_dsi_ctrl_probe: Dsi Ctrl->0 initialized, DSI rev:0x10040001, PHY rev:0x2
787[ 0.916574] mdss_dsi_ctrl_probe: DSI Ctrl name = MDSS DSI CTRL->1
788[ 0.916926] mdss_dsi_find_panel_of_node: cmdline:0:qcom,mdss_dsi_sharp_qhd_dualdsi_cmd_le_x2:1:qcom,mdss_dsi_sharp_qhd_dualdsi_cmd_le_x2:cfg:split_dsi panel_name:qcom,mdss_dsi_sharp_qhd_dualdsi_cmd_le_x2
789[ 0.916957] mdss_dsi_panel_init: Panel Name = le_x2_mdss_dsi_sharp_qhd_dualdsi_cmd
790[ 0.917032] mdss_dsi_panel_timing_from_dt: found new timing "qcom,mdss_dsi_sharp_qhd_dualdsi_cmd_le_x2" (ffffffc0f8716000)
791[ 0.917044] mdss_dsi_parse_dcs_cmds: failed, key=qcom,mdss-dsi-bist-on-command
792[ 0.917051] mdss_dsi_parse_dcs_cmds: failed, key=qcom,mdss-dsi-post-panel-on-command
793[ 0.917058] mdss_dsi_parse_dcs_cmds: failed, key=qcom,mdss-dsi-timing-switch-command
794[ 0.917069] mdss_dsi_parse_topology_config: cfg_node name config0 lm_split:0x0 pp_split:yes
795[ 0.917133] mdss_dsi_parse_panel_features: ulps feature enabled
796[ 0.917141] mdss_dsi_parse_panel_features: ulps during suspend feature disabled
797[ 0.917148] mdss_dsi_parse_dms_config: dynamic switch feature enabled: 0
798[ 0.917553] 996000.qcom,mdss_dsi_ctrl1 supply vddio not found, using dummy regulator
799[ 0.917725] mdss_dsi_parse_ctrl_params:4001 Unable to read qcom,display-id, data=0000000000000000,len=20
800[ 0.917772] mdss_dsi_parse_gpio_params: bklt_en gpio not specified
801[ 0.917817] msm_dss_get_res_byname: 'dsi_phy_regulator' resource not found
802[ 0.917838] mdss_dsi_retrieve_ctrl_resources+0x164/0x1d4->msm_dss_ioremap_byname: 'dsi_phy_regulator' msm_dss_get_res_byname failed
803[ 0.917844] mdss_dsi_retrieve_ctrl_resources: ctrl_base=ffffff8001a56000 ctrl_size=400 phy_base=ffffff8001a58400 phy_size=558
804[ 0.917877] dsi_panel_device_register: Continuous splash enabled
805[ 0.918470] panel_debug_register_base: debugfs_create_file: data_type fail
806[ 0.918780] mdss_dsi_ctrl_probe: Dsi Ctrl->1 initialized, DSI rev:0x10040001, PHY rev:0x2
807[ 0.920131] mdss_dsi_status_init: DSI status check interval:2000
808[ 0.921154] hdmi_tx_get_dt_data:4487 Unable to read qcom,display-id, data=0000000000000000,len=0
809[ 0.921665] hdmi_tx_init_resource: 'core_physical': start = 0xffffff8001a5c000, len=0x50c
810[ 0.921676] hdmi_tx_init_resource: 'qfprom_physical': start = 0xffffff8001a78000, len=0x6158
811[ 0.921777] hdmi_tx_init_resource: 'hdcp_physical': start = 0xffffff8001a5e000, len=0xfff
812[ 0.922820] mdss_register_panel: adding framebuffer device 9a0000.qcom,hdmi_tx
813[ 0.925544] mdss_register_panel: adding framebuffer device soc:qcom,mdss_wb_panel
814[ 0.927242] mdss_fb_probe: fb0: split_mode:3 left:0 right:0
815[ 0.928162] mdss_fb_register: FrameBuffer[0] 1440x2560 registered successfully!
816[ 0.929276] mdss_fb_probe: fb1: split_mode:0 left:0 right:0
817[ 0.929417] mdss_fb_register: FrameBuffer[1] 640x480 registered successfully!
818[ 0.929742] input: HDMI CEC User or Deck Control as /devices/virtual/input/input1
819[ 0.933892] mdss_fb_probe: fb2: split_mode:0 left:0 right:0
820[ 0.934132] mdss_fb_register: FrameBuffer[2] 640x480 registered successfully!
821[ 0.934241] mdss_mdp_splash_parse_dt: splash mem child node is not present
822[ 0.954740] l2cache-pmu soc:l2-pmu: Registered L2 cache PMU using 2 HW PMUs
823[ 0.955483] msm_rpm_log_probe: OK
824[ 0.959203] subsys-pil-tz ce0000.qcom,venus: for venus segments only will be dumped.
825[ 0.960463] subsys-pil-tz soc:qcom,kgsl-hyp: for a530_zap segments only will be dumped.
826[ 0.963197] smd_channel_probe_now: allocation table not initialized
827[ 0.963296] pil-q6v5-mss 2080000.qcom,mss: Failed to find the pas_id.
828[ 0.965273] ssr_monitor initializing ..
829[ 0.966423] input: qbt1000_key_input as /devices/virtual/input/input2
830[ 0.968367] uart_tx_gpio is not available
831[ 0.968381] uart_rx_gpio is not available
832[ 0.968387] uart_cts_gpio is not available
833[ 0.968391] uart_rfr_gpio is not available
834[ 0.969248] sps: BAM device 0x0000000007544000 is not registered yet.
835[ 0.969415] sps:BAM 0x0000000007544000 is registered.
836[ 0.971011] 7570000.uart: ttyHS0 at MMIO 0x7570000 (irq = 21, base_baud = 460800) is a MSM HS UART
837[ 0.973270] msm_serial_hs module loaded
838[ 0.974217] msm_serial_hsl_probe: detected port #0 (ttyHSL0)
839[ 0.974267] AXI: get_pdata(): Error: Client name not found
840[ 0.974273] AXI: msm_bus_cl_get_pdata(): client has to provide missing entry for successful registration
841[ 0.974279] msm_serial_hsl_probe: Bus scaling is disabled
842[ 0.974385] 75b0000.serial: ttyHSL0 at MMIO 0x75b0000 (irq = 12, base_baud = 460800) is a MSM
843[ 0.975367] msm_serial_hsl_probe: detected port #1 (ttyHSL1)
844[ 0.975448] AXI: get_pdata(): Error: Client name not found
845[ 0.975454] AXI: msm_bus_cl_get_pdata(): client has to provide missing entry for successful registration
846[ 0.975459] msm_serial_hsl_probe: Bus scaling is disabled
847[ 0.975541] 75b4000.serial: ttyHSL1 at MMIO 0x75b4000 (irq = 531, base_baud = 460800) is a MSM
848[ 0.975913] msm_serial_hsl_init: driver initialized
849[ 0.984639] ------------[ cut here ]------------
850[ 0.984673] WARNING: CPU: 2 PID: 1 at ../../../../../../kernel/leeco/msm8996/drivers/gpio/gpiolib.c:68 gpio_to_desc+0x2c/0x54()
851[ 0.984678] invalid GPIO -517
852[ 0.984690] CPU: 2 PID: 1 Comm: swapper/0 Tainted: G B W 3.18.31-lineage-g306200f-dirty #2
853[ 0.984696] Hardware name: Letv Technologies, Inc. MSM 8996 v3 + PMI8996 LE_X2-PVT (DT)
854[ 0.984702] Call trace:
855[ 0.984717] [<ffffffc000088854>] dump_backtrace+0x0/0x23c
856[ 0.984722] [<ffffffc000088aa4>] show_stack+0x14/0x1c
857[ 0.984735] [<ffffffc000e60a14>] dump_stack+0x88/0xac
858[ 0.984745] [<ffffffc0000a0bcc>] warn_slowpath_common+0x88/0xb0
859[ 0.984750] [<ffffffc0000a0c70>] warn_slowpath_fmt+0x50/0x58
860[ 0.984755] [<ffffffc00034a9d4>] gpio_to_desc+0x2c/0x54
861[ 0.984760] [<ffffffc000e62c64>] register_smp2p+0x70/0x8c
862[ 0.984766] [<ffffffc00159d724>] rdbg_init+0x1d8/0x350
863[ 0.984776] [<ffffffc00156cb14>] do_one_initcall+0x188/0x1a4
864[ 0.984781] [<ffffffc00156ccf0>] kernel_init_freeable+0x1c0/0x25c
865[ 0.984786] [<ffffffc000e5b83c>] kernel_init+0x14/0xd4
866[ 0.984792] ---[ end trace 512cdd210c7f88eb ]---
867[ 0.984854] ------------[ cut here ]------------
868[ 0.984861] WARNING: CPU: 2 PID: 1 at ../../../../../../kernel/leeco/msm8996/drivers/gpio/gpiolib.c:68 gpio_to_desc+0x2c/0x54()
869[ 0.984865] invalid GPIO -517
870[ 0.984869] CPU: 2 PID: 1 Comm: swapper/0 Tainted: G B W 3.18.31-lineage-g306200f-dirty #2
871[ 0.984873] Hardware name: Letv Technologies, Inc. MSM 8996 v3 + PMI8996 LE_X2-PVT (DT)
872[ 0.984877] Call trace:
873[ 0.984882] [<ffffffc000088854>] dump_backtrace+0x0/0x23c
874[ 0.984887] [<ffffffc000088aa4>] show_stack+0x14/0x1c
875[ 0.984892] [<ffffffc000e60a14>] dump_stack+0x88/0xac
876[ 0.984897] [<ffffffc0000a0bcc>] warn_slowpath_common+0x88/0xb0
877[ 0.984902] [<ffffffc0000a0c70>] warn_slowpath_fmt+0x50/0x58
878[ 0.984906] [<ffffffc00034a9d4>] gpio_to_desc+0x2c/0x54
879[ 0.984911] [<ffffffc000e62c64>] register_smp2p+0x70/0x8c
880[ 0.984917] [<ffffffc00159d75c>] rdbg_init+0x210/0x350
881[ 0.984921] [<ffffffc00156cb14>] do_one_initcall+0x188/0x1a4
882[ 0.984926] [<ffffffc00156ccf0>] kernel_init_freeable+0x1c0/0x25c
883[ 0.984931] [<ffffffc000e5b83c>] kernel_init+0x14/0xd4
884[ 0.984935] ---[ end trace 512cdd210c7f88ec ]---
885[ 0.985144] ------------[ cut here ]------------
886[ 0.985155] WARNING: CPU: 2 PID: 1 at ../../../../../../kernel/leeco/msm8996/drivers/gpio/gpiolib.c:68 gpio_to_desc+0x2c/0x54()
887[ 0.985160] invalid GPIO -517
888[ 0.985166] CPU: 2 PID: 1 Comm: swapper/0 Tainted: G B W 3.18.31-lineage-g306200f-dirty #2
889[ 0.985170] Hardware name: Letv Technologies, Inc. MSM 8996 v3 + PMI8996 LE_X2-PVT (DT)
890[ 0.985175] Call trace:
891[ 0.985180] [<ffffffc000088854>] dump_backtrace+0x0/0x23c
892[ 0.985185] [<ffffffc000088aa4>] show_stack+0x14/0x1c
893[ 0.985192] [<ffffffc000e60a14>] dump_stack+0x88/0xac
894[ 0.985197] [<ffffffc0000a0bcc>] warn_slowpath_common+0x88/0xb0
895[ 0.985202] [<ffffffc0000a0c70>] warn_slowpath_fmt+0x50/0x58
896[ 0.985206] [<ffffffc00034a9d4>] gpio_to_desc+0x2c/0x54
897[ 0.985211] [<ffffffc000e62c64>] register_smp2p+0x70/0x8c
898[ 0.985219] [<ffffffc00159d724>] rdbg_init+0x1d8/0x350
899[ 0.985224] [<ffffffc00156cb14>] do_one_initcall+0x188/0x1a4
900[ 0.985229] [<ffffffc00156ccf0>] kernel_init_freeable+0x1c0/0x25c
901[ 0.985233] [<ffffffc000e5b83c>] kernel_init+0x14/0xd4
902[ 0.985238] ---[ end trace 512cdd210c7f88ed ]---
903[ 0.985296] ------------[ cut here ]------------
904[ 0.985302] WARNING: CPU: 2 PID: 1 at ../../../../../../kernel/leeco/msm8996/drivers/gpio/gpiolib.c:68 gpio_to_desc+0x2c/0x54()
905[ 0.985306] invalid GPIO -517
906[ 0.985311] CPU: 2 PID: 1 Comm: swapper/0 Tainted: G B W 3.18.31-lineage-g306200f-dirty #2
907[ 0.985315] Hardware name: Letv Technologies, Inc. MSM 8996 v3 + PMI8996 LE_X2-PVT (DT)
908[ 0.985320] Call trace:
909[ 0.985325] [<ffffffc000088854>] dump_backtrace+0x0/0x23c
910[ 0.985330] [<ffffffc000088aa4>] show_stack+0x14/0x1c
911[ 0.985334] [<ffffffc000e60a14>] dump_stack+0x88/0xac
912[ 0.985339] [<ffffffc0000a0bcc>] warn_slowpath_common+0x88/0xb0
913[ 0.985344] [<ffffffc0000a0c70>] warn_slowpath_fmt+0x50/0x58
914[ 0.985349] [<ffffffc00034a9d4>] gpio_to_desc+0x2c/0x54
915[ 0.985353] [<ffffffc000e62c64>] register_smp2p+0x70/0x8c
916[ 0.985359] [<ffffffc00159d75c>] rdbg_init+0x210/0x350
917[ 0.985364] [<ffffffc00156cb14>] do_one_initcall+0x188/0x1a4
918[ 0.985369] [<ffffffc00156ccf0>] kernel_init_freeable+0x1c0/0x25c
919[ 0.985373] [<ffffffc000e5b83c>] kernel_init+0x14/0xd4
920[ 0.985377] ---[ end trace 512cdd210c7f88ee ]---
921[ 0.999760] brd: module loaded
922[ 1.001126] loop: module loaded
923[ 1.001332] zram: Created 1 device(s) ...
924[ 1.001459] at24 6-0051: 4096 byte 24c32 EEPROM, writable, 1 bytes/write
925[ 1.001504] at24 8-0051: 4096 byte 24c32 EEPROM, writable, 1 bytes/write
926[ 1.002595] QSEECOM: qseecom_probe: qseecom.qsee_version = 0x1000000
927[ 1.002632] QSEECOM: qseecom_retrieve_ce_data: Device does not support PFE
928[ 1.002641] QSEECOM: qseecom_probe: no-clock-support=0x1
929[ 1.002648] QSEECOM: qseecom_probe: qsee reentrancy support phase is not defined, setting to default 0
930[ 1.003129] QSEECOM: qseecom_probe: qseecom.whitelist_support = 0
931[ 1.007792] i2c-core: driver [tabla-i2c-core] using legacy suspend method
932[ 1.007811] i2c-core: driver [tabla-i2c-core] using legacy resume method
933[ 1.007866] i2c-core: driver [wcd9xxx-i2c-core] using legacy suspend method
934[ 1.007871] i2c-core: driver [wcd9xxx-i2c-core] using legacy resume method
935[ 1.007917] i2c-core: driver [tasha-i2c-core] using legacy suspend method
936[ 1.007922] i2c-core: driver [tasha-i2c-core] using legacy resume method
937[ 1.011166] qce 660000.qcedev: Qualcomm Crypto 5.3.1 device found @0x660000
938[ 1.011188] qce 660000.qcedev: CE device = 0x0
939 , IO base, CE = 0xffffff8003640000
940 , Consumer (IN) PIPE 2, Producer (OUT) PIPE 3
941 IO base BAM = 0x (null)
942 BAM IRQ 248
943 Engines Availability = 0x2011053
944[ 1.011377] sps:BAM 0x0000000000644000 is registered.
945[ 1.011608] sps:BAM 0x0000000000644000 (va:0xffffff8004540000) enabled: ver:0x27, number of pipes:16
946[ 1.011838] QCE50: qce_sps_init: Qualcomm MSM CE-BAM at 0x0000000000644000 irq 248
947[ 1.020902] qcrypto 660000.qcrypto: Qualcomm Crypto 5.3.1 device found @0x660000
948[ 1.020926] qcrypto 660000.qcrypto: CE device = 0x0
949 , IO base, CE = 0xffffff80046c0000
950 , Consumer (IN) PIPE 4, Producer (OUT) PIPE 5
951 IO base BAM = 0x (null)
952 BAM IRQ 248
953 Engines Availability = 0x2011053
954[ 1.021287] QCE50: qce_sps_init: Qualcomm MSM CE-BAM at 0x0000000000644000 irq 248
955[ 1.028061] qcrypto 660000.qcrypto: qcrypto-ecb-aes
956[ 1.028171] qcrypto 660000.qcrypto: qcrypto-cbc-aes
957[ 1.028264] qcrypto 660000.qcrypto: qcrypto-ctr-aes
958[ 1.028327] qcrypto 660000.qcrypto: qcrypto-ecb-des
959[ 1.028410] qcrypto 660000.qcrypto: qcrypto-cbc-des
960[ 1.028473] qcrypto 660000.qcrypto: qcrypto-ecb-3des
961[ 1.028534] qcrypto 660000.qcrypto: qcrypto-cbc-3des
962[ 1.028596] qcrypto 660000.qcrypto: qcrypto-xts-aes
963[ 1.028657] qcrypto 660000.qcrypto: qcrypto-sha1
964[ 1.028717] qcrypto 660000.qcrypto: qcrypto-sha256
965[ 1.028777] qcrypto 660000.qcrypto: qcrypto-aead-hmac-sha1-cbc-aes
966[ 1.028838] qcrypto 660000.qcrypto: qcrypto-aead-hmac-sha1-cbc-des
967[ 1.028898] qcrypto 660000.qcrypto: qcrypto-aead-hmac-sha1-cbc-3des
968[ 1.028962] qcrypto 660000.qcrypto: qcrypto-aead-hmac-sha256-cbc-aes
969[ 1.029021] qcrypto 660000.qcrypto: qcrypto-aead-hmac-sha256-cbc-des
970[ 1.029082] qcrypto 660000.qcrypto: qcrypto-aead-hmac-sha256-cbc-3des
971[ 1.029142] qcrypto 660000.qcrypto: qcrypto-hmac-sha1
972[ 1.029236] qcrypto 660000.qcrypto: qcrypto-hmac-sha256
973[ 1.029294] qcrypto 660000.qcrypto: qcrypto-aes-ccm
974[ 1.029353] qcrypto 660000.qcrypto: qcrypto-rfc4309-aes-ccm
975[ 1.032100] ICE IRQ = 31
976[ 1.032402] qcom_ice_get_device_tree_data: No vdd-hba-supply regulator, assuming not needed
977[ 1.032458] ICE IRQ = 32
978[ 1.037277] qcom_ice_get_pdevice: found ice device ffffffc0f724b800
979[ 1.037295] qcom_ice_get_pdevice: matching platform device ffffffc0f8fae800
980[ 1.037809] scm_call failed: func id 0x42000c02, ret: -2, syscall returns: 0xfffffffffffffffc, 0x0, 0x0
981[ 1.038431] ufs_qcom_phy_qmp_14nm 627000.ufsphy: failed to get tx_iface_clk err -2
982[ 1.038440] ufs_qcom_phy_qmp_14nm 627000.ufsphy: failed to get rx_iface_clk err -2
983[ 1.039505] scsi host0: ufshcd
984[ 1.043147] qcom_ice 630000.ufsice: QC ICE 2.1.44 device found @0xffffff80022f0000
985[ 1.048302] SCSI Media Changer driver v0.25
986[ 1.051941] Ethernet Channel Bonding Driver: v3.7.1 (April 27, 2011)
987[ 1.052916] tun: Universal TUN/TAP device driver, 1.6
988[ 1.052951] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
989[ 1.053331] PPP generic driver version 2.4.2
990[ 1.053500] PPP BSD Compression module registered
991[ 1.053508] PPP Deflate Compression module registered
992[ 1.053546] PPP MPPE Compression module registered
993[ 1.053557] NET: Registered protocol family 24
994[ 1.053588] Context not found
995[ 1.065926] ufshcd 624000.ufshc: ufshcd_print_pwr_info:[RX, TX]: gear=[1, 1], lane[1, 1], pwr[SLOWAUTO_MODE, SLOWAUTO_MODE], rate = 0
996[ 1.086745] msm_pcie_enable: PCIe: Assert the reset of endpoint of RC0.
997[ 1.090359] msm_pcie_enable: PCIe RC0 PHY is ready!
998[ 1.100447] msm_pcie_enable: PCIe: Release the reset of endpoint of RC0.
999[ 1.142465] msm_pcie_enable: PCIe RC0 link initialized
1000[ 1.142571] PCI host bridge /soc/qcom,pcie@00600000 ranges:
1001[ 1.142586] No bus range found for /soc/qcom,pcie@00600000, using [bus 00-ff]
1002[ 1.142609] IO 0x0c200000..0x0c2fffff -> 0x0c200000
1003[ 1.142620] MEM 0x0c300000..0x0cffffff -> 0x0c300000
1004[ 1.152766] pci-msm 600000.qcom,pcie: PCI host bridge to bus 0000:00
1005[ 1.152777] pci_bus 0000:00: root bus resource [bus 00-ff]
1006[ 1.152785] pci_bus 0000:00: root bus resource [io 0x0000-0xfffff] (bus address [0xc200000-0xc2fffff])
1007[ 1.152790] pci_bus 0000:00: root bus resource [mem 0x0c300000-0x0cffffff]
1008[ 1.152849] pci 0000:00:00.0: [17cb:0104] type 01 class 0x060400
1009[ 1.152943] msm_pcie_oper_conf: Read of RC0 0:0x00 + 0x0014[4] is all FFs
1010[ 1.152954] pci 0000:00:00.0: reg 0x10: [mem 0x00000000-0x00000fff 64bit]
1011[ 1.153001] pci 0000:00:00.0: IOMMU is currently not supported for PCI
1012[ 1.153083] pci 0000:00:00.0: PME# supported from D0 D3hot D3cold
1013[ 1.153121] pci 0000:00:00.0: of_irq_parse_pci() failed with rc=-19
1014[ 1.153315] pci 0000:00:00.0: bridge configuration invalid ([bus 00-00]), reconfiguring
1015[ 1.153524] pci 0000:01:00.0: [168c:003e] type 00 class 0x028000
1016[ 1.153666] msm_pcie_oper_conf: Read of RC0 1:0x00 + 0x0014[4] is all FFs
1017[ 1.153674] pci 0000:01:00.0: reg 0x10: [mem 0x00000000-0x001fffff 64bit]
1018[ 1.153821] pci 0000:01:00.0: IOMMU is currently not supported for PCI
1019[ 1.153982] pci 0000:01:00.0: PME# supported from D0 D3hot D3cold
1020[ 1.154456] pci_bus 0000:01: busn_res: [bus 01-ff] end is updated to 01
1021[ 1.154559] msm_pcie_oper_conf: Read of RC0 0:0x00 + 0x0028[4] is all FFs
1022[ 1.154588] pci 0000:00:00.0: BAR 8: assigned [mem 0x0c400000-0x0c5fffff]
1023[ 1.154596] pci 0000:00:00.0: BAR 0: assigned [mem 0x0c300000-0x0c300fff 64bit]
1024[ 1.154644] pci 0000:01:00.0: BAR 0: assigned [mem 0x0c400000-0x0c5fffff 64bit]
1025[ 1.154874] pci 0000:00:00.0: PCI bridge to [bus 01]
1026[ 1.154909] pci 0000:00:00.0: bridge window [mem 0x0c400000-0x0c5fffff]
1027[ 1.156527] cnss soc:qcom,cnss: for AR6320 segments only will be dumped.
1028[ 1.168440] msm_pcie_disable: PCIe: Assert the reset of endpoint of RC0.
1029[ 1.181020] cnss: Platform driver probed successfully.
1030[ 1.183269] usbcore: registered new interface driver asix
1031[ 1.183300] usbcore: registered new interface driver ax88179_178a
1032[ 1.183327] usbcore: registered new interface driver cdc_ether
1033[ 1.183346] usbcore: registered new interface driver net1080
1034[ 1.183452] usbcore: registered new interface driver cdc_subset
1035[ 1.183473] usbcore: registered new interface driver zaurus
1036[ 1.187104] usbcore: registered new interface driver cdc_ncm
1037[ 1.189958] msm_sharedmem: msm_sharedmem_probe: Device created for client 'rmtfs'
1038[ 1.193933] 7411000.qusb supply USB3_GDSC not found, using dummy regulator
1039[ 1.194193] 7412000.qusb supply USB3_GDSC not found, using dummy regulator
1040[ 1.197372] msm-dwc3 6a00000.ssusb: unable to get dbm device
1041[ 1.200825] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
1042[ 1.200843] ehci-pci: EHCI PCI platform driver
1043[ 1.200915] usbcore: registered new interface driver usb-storage
1044[ 1.200933] usbcore: registered new interface driver ums-alauda
1045[ 1.200951] usbcore: registered new interface driver ums-cypress
1046[ 1.200968] usbcore: registered new interface driver ums-datafab
1047[ 1.200985] usbcore: registered new interface driver ums-freecom
1048[ 1.201001] usbcore: registered new interface driver ums-isd200
1049[ 1.201019] usbcore: registered new interface driver ums-jumpshot
1050[ 1.201036] usbcore: registered new interface driver ums-karma
1051[ 1.201052] usbcore: registered new interface driver ums-sddr09
1052[ 1.201071] usbcore: registered new interface driver ums-sddr55
1053[ 1.201087] usbcore: registered new interface driver ums-usbat
1054[ 1.201171] usbcore: registered new interface driver usbserial
1055[ 1.201191] usbcore: registered new interface driver usb_ehset_test
1056[ 1.201301] i2c-core: driver [ohio] using legacy suspend method
1057[ 1.201306] i2c-core: driver [ohio] using legacy resume method
1058[ 1.201544] cyccg 6-0008: cyccg_probe: loading cyccg driver, i2c addr: 6-0008.
1059[ 1.201937] cyccg_parse_dt gpio reset : 1014, intr : 73, uart 132 ad-sel 25 external_5v_en_flag is true
1060[ 1.201942] cyccg cyccg_init_gpio: init gpio
1061[ 1.207202] msm_sharedmem: sharedmem_register_qmi: qmi init successful
1062[ 1.232782] i2c-msm-v2 757a000.i2c: msm_bus_scale_register_client(mstr-id:86):0x13 (ok)
1063[ 1.233150] cyccg_probe: client->irq=454
1064[ 1.233156] letv_pd_init_adjust_charger_parameter:DEBUG: entry
1065[ 1.233162] letv_pd_set_charger_in_parameter:DEBUG: entry
1066[ 1.233167] letv_pd_set_charger_out_parameter:DEBUG: entry
1067[ 1.233271] letv_pd_check_off_charger_status:DEBUG: entry
1068[ 1.233276] letv_pd_thread_handle:DEBUG: entry
1069[ 1.233281] letv_pd_get_current_rdo:DEBUG: entry
1070[ 1.233285] letv_pd_get_register:DEBUG: entry
1071[ 1.233594] letv_pd_message_request_get_valid_pdo:DEBUG: entry
1072[ 1.233603] letv_pd_message_request_get_valid_pdo:DEBUG: index=-1, vol=0, mA=0
1073[ 1.233607] letv_pd_check_off_charger_status:ERROR: get mA fail
1074[ 1.233713] cyccg_irq_therad: <<<< irq arrive
1075[ 1.233721] cyccg_irq_thread_handler: driver default process.
1076[ 1.234257] sps:BAM 0x0000000007544000 (va:0xffffff80022c0000) enabled: ver:0x19, number of pipes:24
1077[ 1.237726] cyccg_drv_internal_event_process: msg: code=0x80, len=0
1078[ 1.237736] cyccg_drv_internal_event_process: CY_PD_RESP_RESET_COMPLETE
1079[ 1.238109] cyccg_hpi_clear_intr: write INTR_REG_CLEAR_RQT, (0)
1080[ 1.238363] dump_ccg_status: TYPE_C_STATUS (0x09):
1081[ 1.238369] dump_ccg_status: port_connected: Yes
1082[ 1.238374] dump_ccg_status: attached_dev_type: Source
1083[ 1.238378] dump_ccg_status: port connected to CC1
1084[ 1.238383] dump_ccg_status: type_c_current_level: Default
1085[ 1.238387] dump_ccg_status: Ra_status: Ra not detected
1086[ 1.238391] dump_ccg_status: PD_STATUS (0x00000012):
1087[ 1.238396] dump_ccg_status: Contract Established: No
1088[ 1.238400] dump_ccg_status: EMCA_present: No
1089[ 1.238404] dump_ccg_status: VCONN_supplier: No
1090[ 1.238408] dump_ccg_status: VCONN_status: Not Souring
1091[ 1.238414] cyccg_hpi_initialize: >>>>
1092[ 1.238571] cyccg_irq_therad: >>>> IRQ_HANDLED
1093[ 1.238880] cyccg_dump_pending_events_no_sync:
1094[ 1.239098] cyccg_hpi_poll_resp_msg: code = 0x0, len = 0
1095[ 1.239329] cyccg_hpi_poll_resp_msg: code = 0x0, len = 0
1096[ 1.239334] cyccg_hpi_initialize: >>>> Set EVENT MASK
1097[ 1.239580] cyccg_irq_therad: <<<< irq arrive
1098[ 1.239584] cyccg_irq_thread_handler: driver internal monitor process.
1099[ 1.242872] cyccg_irq_drv_internal_cmd_process: msg: code=0x2, len=0
1100[ 1.242879] cyccg_irq_drv_internal_cmd_process: issued command resp process.
1101[ 1.242985] cyccg_hpi_clear_intr: write INTR_REG_CLEAR_RQT, (0)
1102[ 1.243004] cyccg_hpi_cmd_sync: cmd_issued = 0
1103[ 1.243009] cyccg_hpi_initialize: >>>> Set SOURCE_PDO_MASK
1104[ 1.243220] cyccg_irq_therad: >>>> IRQ_HANDLED
1105[ 1.243398] cyccg_irq_therad: <<<< irq arrive
1106[ 1.243403] cyccg_irq_thread_handler: driver internal monitor process.
1107[ 1.246608] cyccg_irq_drv_internal_cmd_process: msg: code=0x2, len=0
1108[ 1.246613] cyccg_irq_drv_internal_cmd_process: issued command resp process.
1109[ 1.246737] cyccg_hpi_clear_intr: write INTR_REG_CLEAR_RQT, (0)
1110[ 1.246756] cyccg_hpi_cmd_sync: cmd_issued = 0
1111[ 1.246958] cyccg_irq_therad: >>>> IRQ_HANDLED
1112[ 1.247139] cyccg_irq_therad: <<<< irq arrive
1113[ 1.247143] cyccg_irq_thread_handler: driver internal monitor process.
1114[ 1.250350] cyccg_irq_drv_internal_cmd_process: msg: code=0x2, len=0
1115[ 1.250356] cyccg_irq_drv_internal_cmd_process: issued command resp process.
1116[ 1.250609] cyccg_hpi_clear_intr: write INTR_REG_CLEAR_RQT, (0)
1117[ 1.250627] cyccg_hpi_cmd_sync: cmd_issued = 0
1118[ 1.250632] cyccg_hpi_initialize: >>>> Send INIT_COMPLETE
1119[ 1.250830] cyccg_irq_therad: >>>> IRQ_HANDLED
1120[ 1.251088] cyccg_irq_therad: <<<< irq arrive
1121[ 1.251092] cyccg_irq_thread_handler: driver internal monitor process.
1122[ 1.254289] cyccg_irq_drv_internal_cmd_process: msg: code=0x2, len=0
1123[ 1.254294] cyccg_irq_drv_internal_cmd_process: issued command resp process.
1124[ 1.254401] cyccg_hpi_clear_intr: write INTR_REG_CLEAR_RQT, (0)
1125[ 1.254419] cyccg_hpi_cmd_sync: cmd_issued = 0
1126[ 1.254424] cyccg_hpi_initialize: INIT_COMPLETE resp code: 0x2, (0)
1127[ 1.254428] cyccg_hpi_initialize: INIT_COMPLETE successfully done.
1128[ 1.254612] cyccg_irq_therad: >>>> IRQ_HANDLED
1129[ 1.255399] cyccg_read_all_version: bl FW version: 1.0.2.897
1130[ 1.255404] cyccg_read_all_version: app FW version: 3.2,0,LE
1131[ 1.255712] cyccg_update_external_ap_status: event = 0x00.
1132[ 1.255717] cyccg_update_external_ap_status: try to sync CCG and AP status.
1133[ 1.256219] dump_ccg_status: TYPE_C_STATUS (0x09):
1134[ 1.256225] dump_ccg_status: port_connected: Yes
1135[ 1.256229] dump_ccg_status: attached_dev_type: Source
1136[ 1.256233] dump_ccg_status: port connected to CC1
1137[ 1.256237] dump_ccg_status: type_c_current_level: Default
1138[ 1.256241] dump_ccg_status: Ra_status: Ra not detected
1139[ 1.256245] dump_ccg_status: PD_STATUS (0x00000012):
1140[ 1.256249] dump_ccg_status: Contract Established: No
1141[ 1.256253] dump_ccg_status: EMCA_present: No
1142[ 1.256257] dump_ccg_status: VCONN_supplier: No
1143[ 1.256260] dump_ccg_status: VCONN_status: Not Souring
1144[ 1.256265] cyccg_sync_ap_status: contract_status=0, port_connected=1
1145[ 1.256272] cyccg_sync_ap_status: turn VBUS off.
1146[ 1.256277] cyccg_sync_ap_status: set to OTG device.
1147[ 1.256280] cyccg switch to SBU1/SBU2
1148[ 1.256292] letv_pd_set_usb_mode:DEBUG: entry, mode=0
1149[ 1.256297] letv_pd_del_timer_letv_pd_charger_setup:DEBUG: entry
1150[ 1.256301] letv_pd_init_adjust_charger_parameter:DEBUG: entry
1151[ 1.256523] cyccg_probe: check auto fw update, return early. fw:3.2, drv fw:2.9.
1152[ 1.257302] gbridge_init: gbridge_init successs.
1153[ 1.257654] mousedev: PS/2 mouse device common for all mice
1154[ 1.257990] usbcore: registered new interface driver xpad
1155[ 1.258678] atmel_mxt_ts 12-004a: Success to find surpport lcm(sharp)
1156[ 1.258933] atmel_mxt_ts 12-004a: successfully request reset_gpio 89
1157[ 1.291966] ufshcd 624000.ufshc: ufshcd_print_pwr_info:[RX, TX]: gear=[3, 3], lane[1, 1], pwr[FAST MODE, FAST MODE], rate = 2
1158[ 1.292621] scsi 0:0:0:49488: Well-known LUN SAMSUNG KLUBG4G1CE-B0B1 0700 PQ: 0 ANSI: 6
1159[ 1.293920] scsi 0:0:0:49456: Well-known LUN SAMSUNG KLUBG4G1CE-B0B1 0700 PQ: 0 ANSI: 6
1160[ 1.294717] scsi 0:0:0:49476: Well-known LUN SAMSUNG KLUBG4G1CE-B0B1 0700 PQ: 0 ANSI: 6
1161[ 1.295600] scsi 0:0:0:0: Direct-Access SAMSUNG KLUBG4G1CE-B0B1 0700 PQ: 0 ANSI: 6
1162[ 1.296419] scsi 0:0:0:1: Direct-Access SAMSUNG KLUBG4G1CE-B0B1 0700 PQ: 0 ANSI: 6
1163[ 1.296975] scsi 0:0:0:2: Direct-Access SAMSUNG KLUBG4G1CE-B0B1 0700 PQ: 0 ANSI: 6
1164[ 1.297532] scsi 0:0:0:3: Direct-Access SAMSUNG KLUBG4G1CE-B0B1 0700 PQ: 0 ANSI: 6
1165[ 1.298059] scsi 0:0:0:4: Direct-Access SAMSUNG KLUBG4G1CE-B0B1 0700 PQ: 0 ANSI: 6
1166[ 1.298597] scsi 0:0:0:5: Direct-Access SAMSUNG KLUBG4G1CE-B0B1 0700 PQ: 0 ANSI: 6
1167[ 1.299536] sd 0:0:0:0: [sda] 16384-byte physical blocks
1168[ 1.301250] sd 0:0:0:2: [sdc] 16384-byte physical blocks
1169[ 1.301259] sd 0:0:0:1: [sdb] 16384-byte physical blocks
1170[ 1.301277] sd 0:0:0:0: [sda] 16384-byte physical blocks
1171[ 1.303504] sd 0:0:0:1: [sdb] 16384-byte physical blocks
1172[ 1.303515] sd 0:0:0:2: [sdc] 16384-byte physical blocks
1173[ 1.305351] sd 0:0:0:3: [sdd] 16384-byte physical blocks
1174[ 1.305406] sda: sda1 sda2 sda3 sda4 sda5 sda6 sda7 sda8 sda9
1175[ 1.305855] sdb: sdb1
1176[ 1.306139] sdc: sdc1
1177[ 1.306671] sd 0:0:0:1: [sdb] 16384-byte physical blocks
1178[ 1.306794] sd 0:0:0:2: [sdc] 16384-byte physical blocks
1179[ 1.307897] sd 0:0:0:3: [sdd] 16384-byte physical blocks
1180[ 1.308466] sd 0:0:0:4: [sde] 16384-byte physical blocks
1181[ 1.308629] sd 0:0:0:5: [sdf] 16384-byte physical blocks
1182[ 1.309170] sd 0:0:0:0: [sda] 16384-byte physical blocks
1183[ 1.311615] sdd: sdd1 sdd2 sdd3
1184[ 1.311948] sd 0:0:0:4: [sde] 16384-byte physical blocks
1185[ 1.311958] sd 0:0:0:5: [sdf] 16384-byte physical blocks
1186[ 1.312885] sd 0:0:0:3: [sdd] 16384-byte physical blocks
1187[ 1.315116] sdf: sdf1 sdf2 sdf3 sdf4 sdf5 sdf6 sdf7 sdf8 sdf9 sdf10 sdf11 sdf12 sdf13 sdf14
1188[ 1.315710] sde: sde1 sde2 sde3 sde4 sde5 sde6 sde7 sde8 sde9 sde10 sde11 sde12 sde13 sde14 sde15 sde16 sde17 sde18 sde19 sde20 sde21 sde22 sde23 sde24 sde25 sde26 sde27 sde28 sde29 sde30 sde31 sde32 sde33
1189[ 1.317054] sd 0:0:0:5: [sdf] 16384-byte physical blocks
1190[ 1.319436] sd 0:0:0:4: [sde] 16384-byte physical blocks
1191[ 1.393869] i2c-msm-v2 75ba000.i2c: msm_bus_scale_register_client(mstr-id:84):0x14 (ok)
1192[ 1.394855] sps: BAM device 0x0000000007584000 is not registered yet.
1193[ 1.395098] sps:BAM 0x0000000007584000 is registered.
1194[ 1.395292] sps:BAM 0x0000000007584000 (va:0xffffff8006b00000) enabled: ver:0x19, number of pipes:24
1195[ 1.403230] atmel_mxt_ts 12-004a: Family: 164 Variant: 2 Firmware V1.6.AA Objects: 43
1196[ 1.405367] atmel_mxt_ts 12-004a: mxt_read_t38_object: T38 address: 0x1ea
1197 data: 0x1, 0x15, 0xaa, 0x10, 0x5, 0xd
1198[ 1.405733] atmel_mxt_ts 12-004a: The same fw version
1199[ 1.405745] atmel_mxt_ts 12-004a: type: 0x1, data->pattern_type: 0x1
1200[ 1.405759] atmel_mxt_ts 12-004a: mxt_parse_config_dt: config_data: 0x1, config_month: 0x4, config_year: 0x10
1201[ 1.405768] atmel_mxt_ts 12-004a: config: year 16, month 4, date 1, hw: year 16, month 5, date 13
1202[ 1.405773] atmel_mxt_ts 12-004a: mxt_parse_cfg_and_load, no need update config
1203[ 1.406247] atmel_mxt_ts 12-004a: process t6 message: 0x80
1204[ 1.407584] atmel_mxt_ts 12-004a: process t6 message: 0x10
1205[ 1.408181] atmel_mxt_ts 12-004a: T100 Touchscreen size X1439Y2559
1206[ 1.408328] input: atmel_mxt_T100_touchscreen as /devices/soc/75ba000.i2c/i2c-12/12-004a/input/input3
1207[ 1.410667] synaptics Failed to find surpport lcm
1208[ 1.412404] input: hbtp_vm as /devices/virtual/input/input4
1209[ 1.413434] atmel_mxt_ts 12-004a: process t6 message: 0x0
1210[ 1.413692] nxu8010_probe
1211[ 1.413771] gf:gf_init, entry
1212[ 1.413813] status = 0x0
1213[ 1.413817] gf:gf_init, exit
1214[ 1.414852] qcom,qpnp-rtc qpnp-rtc-8: rtc core: registered qpnp_rtc as rtc0
1215[ 1.415082] i2c /dev entries driver
1216[ 1.448324] vmem: Up and running with 4 banks of memory from [??? 0xffffffc0f8911e38-0x00000000 flags 0xffffffc0f6cb2018]
1217[ 1.464360] msm_actuator_platform_probe:2341 failed rc -22
1218[ 1.464391] qcom,actuator: probe of a0c000.qcom,cci:qcom,actuator@1 failed with error -22
1219[ 1.503364] letv_pd_timer_ufp_task_function:DEBUG: entry
1220[ 1.503381] letv_pd_timer_ufp_task_function:DEBUG: it's not PD charger
1221[ 1.548377] msm_cci_init:1421: hw_version = 0x10040000
1222[ 1.567447] qcom,slave-addr = 0xA1
1223[ 1.588488] qcom,slave-addr = 0xA1
1224[ 1.589142] msm_set_otp_data: Enter
1225[ 1.589150] msm_set_otp_data: succeed
1226[ 1.750832] msm_cci_init:1421: hw_version = 0x10040000
1227[ 1.750916] read_eeprom_memory:1859 ov8865 write table
1228[ 1.806723] read_eeprom_memory:1868 ov8865 write end
1229[ 1.818656] read_eeprom_memory: ov8865 enable OTP_DPC 5002
1230[ 1.818824] msm_set_otp_data: Enter
1231[ 1.818832] msm_set_otp_data: succeed
1232[ 1.898908] qcom,project-name x2, rc 0
1233[ 1.899363] msm_flash_init_module:1645 Enter
1234[ 1.901004] msm_flash_platform_probe:1525 Enter
1235[ 1.901027] msm_flash_get_dt_data:1367 called
1236[ 1.901039] msm_flash_get_dt_data:1381 subdev id 0
1237[ 1.901046] msm_flash_get_dt_data:1389 msm_flash_get_dt_data qcom,cci-master 0, rc 0
1238[ 1.901439] msm_flash_get_gpio_dt_data:788 msm_flash_get_gpio_dt_data gpio count 1
1239[ 1.901482] msm_flash_get_gpio_dt_data:816 msm_flash_get_gpio_dt_data gpio_array[0] = 62
1240[ 1.901529] msm_flash_get_pmic_source_info:879 switch trigger switch_trigger
1241[ 1.901542] msm_flash_get_pmic_source_info:888 count 2
1242[ 1.901547] msm_flash_get_pmic_source_info:895 msm_flash_get_pmic_source_info:895 flash_num_sources = 2
1243[ 1.901569] msm_flash_get_pmic_source_info:919 default trigger flash0_trigger
1244[ 1.901580] msm_flash_get_pmic_source_info:954 max_current[0] 625
1245[ 1.901604] msm_flash_get_pmic_source_info:919 default trigger flash1_trigger
1246[ 1.901610] msm_flash_get_pmic_source_info:954 max_current[1] 625
1247[ 1.901617] msm_flash_get_pmic_source_info:963 msm_flash_get_pmic_source_info:963 fctrl->flash_driver_type = 3
1248[ 1.901624] msm_flash_get_pmic_source_info:968 count 2
1249[ 1.901631] msm_flash_get_pmic_source_info:975 msm_flash_get_pmic_source_info:975 torch_num_sources = 2
1250[ 1.901651] msm_flash_get_pmic_source_info:999 default trigger torch0_trigger
1251[ 1.901660] msm_flash_get_pmic_source_info:1024 max_current[0] 120
1252[ 1.901681] msm_flash_get_pmic_source_info:999 default trigger torch1_trigger
1253[ 1.901687] msm_flash_get_pmic_source_info:1024 max_current[1] 120
1254[ 1.901694] msm_flash_get_pmic_source_info:1033 msm_flash_get_pmic_source_info:1033 fctrl->flash_driver_type = 3
1255[ 1.902063] msm_flash_platform_probe:1583 msm_flash_platform_probe:1583 flash sd name = v4l-subdev11
1256[ 1.902085] msm_flash_platform_probe:1627 probe success
1257[ 1.906838] msm_sensor_driver_platform_probe:1398 pdev->name = a0c000.qcom,cci:qcom,camera@0
1258[ 1.906890] msm_get_otp_data: Enter
1259[ 1.908048] msm_sensor_driver_platform_probe:1398 pdev->name = a0c000.qcom,cci:qcom,camera@1
1260[ 1.908073] msm_sensor_driver_platform_probe:1442 failed UNKNOWN DEVICE
1261[ 1.909102] msm_sensor_driver_platform_probe:1398 pdev->name = a0c000.qcom,cci:qcom,camera@2
1262[ 1.909135] msm_get_otp_data: Enter
1263[ 1.909144] msm_get_otp_front_camera_id: ov8865
1264[ 1.909150] msm_get_otp_front_camera_id: ov8865 succeed
1265[ 1.915487] MSM-CPP cpp_init_hardware:850 CPP HW Version: 0x60000000
1266[ 1.915513] MSM-CPP cpp_init_hardware:868 stream_cnt:0
1267[ 1.928833] __msm_jpeg_init:1537] Jpeg Device id 0
1268[ 1.930591] __msm_jpeg_init:1537] Jpeg Device id 2
1269[ 1.931991] __msm_jpeg_init:1537] Jpeg Device id 3
1270[ 1.939488] msm_fd_hw_set_dt_parms_by_name: Error property does not exist
1271[ 2.036751] msm_fd aa4000.qcom,fd: Face detection halt timeout
1272[ 2.038606] SMB1351 smb1351_parallel_slave_probe: smb1351 parallel successfully probed.
1273[ 2.040920] FG: fg_probe: FG Probe success - FG Revision DIG:3.1 ANA:1.2 PMIC subtype=19
1274[ 2.042700] SMBCHG: smbchg_probe: USB supply not found, deferring probe
1275[ 2.048521] unable to find DT imem DLOAD mode node
1276[ 2.051148] unable to find DT imem EDLOAD mode node
1277[ 2.091723] device-mapper: uevent: version 1.0.3
1278[ 2.091991] device-mapper: ioctl: 4.28.0-ioctl (2014-09-17) initialised: dm-devel@redhat.com
1279[ 2.095449] device-mapper: req-crypt: dm-req-crypt successfully initalized.
1280
1281[ 2.095460] Bluetooth: ffffffc0f989bd30
1282[ 2.095467] Bluetooth: ffffffc0f989bd10
1283[ 2.097151] bt_power bt_qca6174: no qca,bt-vdd-core-voltage-level property
1284[ 2.097291] bt_power bt_qca6174: no qca,bt-vdd-pa-voltage-level property
1285[ 2.097298] bt_dt_parse_vreg_info: qca,bt-vdd-ldo: is not provided in device tree
1286[ 2.097304] bt_dt_parse_vreg_info: qca,bt-chip-pwd: is not provided in device tree
1287[ 2.098048] sdhci: Secure Digital Host Controller Interface driver
1288[ 2.098054] sdhci: Copyright(c) Pierre Ossman
1289[ 2.098061] sdhci-pltfm: SDHCI platform and OF driver helper
1290[ 2.099111] qcom_ice_get_pdevice: found ice device ffffffc0f724bc00
1291[ 2.099118] qcom_ice_get_pdevice: matching platform device ffffffc0f8faec00
1292[ 2.105850] hidraw: raw HID events driver (C) Jiri Kosina
1293[ 2.106296] usbcore: registered new interface driver usbhid
1294[ 2.106303] usbhid: USB HID core driver
1295[ 2.106886] ashmem: initialized
1296[ 2.111556] qpnp_coincell_charger_show_state: enabled=Y, voltage=3200 mV, resistance=2100 ohm
1297[ 2.173440] msm_pcie_enable: PCIe: Assert the reset of endpoint of RC1.
1298[ 2.177338] msm_pcie_enable: PCIe RC1 PHY is ready!
1299[ 2.187458] msm_pcie_enable: PCIe: Release the reset of endpoint of RC1.
1300[ 2.296267] msm_pcie_enable: PCIe: Assert the reset of endpoint of RC1.
1301[ 2.296285] msm_pcie_enable: PCIe RC1 link initialization failed
1302[ 2.297585] msm_pcie_enumerate: PCIe: failed to enable RC1.
1303[ 2.297602] msm_11ad soc:qcom,wil6210: Parent PCIE enumeration failed
1304[ 2.297654] msm_11ad: probe of soc:qcom,wil6210 failed with error -1
1305[ 2.303261] bimc-bwmon 408000.qcom,cpu-bwmon: BW HWmon governor registered.
1306[ 2.305548] arm-memlat-mon soc:qcom,arm-memlat-mon-0: Memory Latency governor registered.
1307[ 2.305609] arm-memlat-mon soc:qcom,arm-memlat-mon-2: Memory Latency governor registered.
1308[ 2.310478] m4m-hwmon 6530000.qcom,m4m-hwmon: Cache HWmon governor registered.
1309[ 2.315009] devfreq soc:qcom,cpubw: Couldn't update frequency transition information.
1310[ 2.315128] devfreq soc:qcom,mincpubw: Couldn't update frequency transition information.
1311[ 2.315229] devfreq soc:qcom,memlat-cpu0: Couldn't update frequency transition information.
1312[ 2.315334] devfreq soc:qcom,memlat-cpu2: Couldn't update frequency transition information.
1313[ 2.316274] devfreq soc:qcom,m4m: Couldn't update frequency transition information.
1314[ 2.319170] drv2604l_probe:Enter
1315[ 2.319882] i2c-msm-v2 75b7000.i2c: msm_bus_scale_register_client(mstr-id:84):0x22 (ok)
1316[ 2.320105] drv2604l_probe, status=132
1317[ 2.320109] drv2604 driver found: drv2604.
1318[ 2.327428] dev_init_platform_data, LRA = 200, drive_time=0x14
1319[ 3.410322] dev_auto_calibrate, calibration status =0x80
1320[ 3.413525] drv2604 probe succeeded
1321[ 3.413709] usbcore: registered new interface driver snd-usb-audio
1322[ 3.415275] tfa98xx_i2c_init(): TFA98XX driver version 2.10.1-a
1323[ 3.415306] tfa98xx_i2c_probe(): tfa98xx_i2c_probe
1324[ 3.415803] i2c-msm-v2 75b6000.i2c: msm_bus_scale_register_client(mstr-id:84):0x23 (ok)
1325[ 3.416050] tfa98xx_i2c_probe(): TFA9890 detected
1326[ 3.416054] tfa98xx_i2c_probe(): TFA9890 detectedtfa98xx.cnt
1327[ 3.416067] tfa98xx 8-0034: Skipping IRQ registration
1328[ 3.416151] tfa98xx_i2c_probe(): tfa98xx_i2c_probe Probe completed successfully!
1329[ 3.426810] msm-dai-tdm soc:qcom,msm-dai-tdm-tert-rx: msm_dai_tdm_q6_probe: dev_name: soc:qcom,msm-dai-tdm-tert-rx group_id: 0x9120
1330[ 3.427073] msm-dai-q6-tdm soc:qcom,msm-dai-tdm-tert-rx:qcom,msm-dai-q6-tdm-tert-rx-0: msm_dai_q6_tdm_dev_probe: dev_name: soc:qcom,msm-dai-tdm-tert-rx:qcom,msm-dai-q6-tdm-tert-rx-0 dev_id: 0x9020
1331[ 3.427082] msm-dai-q6-tdm soc:qcom,msm-dai-tdm-tert-rx:qcom,msm-dai-q6-tdm-tert-rx-0: msm_dai_q6_tdm_dev_probe: Custom tdm header not supported
1332[ 3.427225] msm-dai-q6-tdm soc:qcom,msm-dai-tdm-tert-rx:qcom,msm-dai-q6-tdm-tert-rx-1: msm_dai_q6_tdm_dev_probe: dev_name: soc:qcom,msm-dai-tdm-tert-rx:qcom,msm-dai-q6-tdm-tert-rx-1 dev_id: 0x9022
1333[ 3.427233] msm-dai-q6-tdm soc:qcom,msm-dai-tdm-tert-rx:qcom,msm-dai-q6-tdm-tert-rx-1: msm_dai_q6_tdm_dev_probe: Custom tdm header not supported
1334[ 3.427365] msm-dai-q6-tdm soc:qcom,msm-dai-tdm-tert-rx:qcom,msm-dai-q6-tdm-tert-rx-2: msm_dai_q6_tdm_dev_probe: dev_name: soc:qcom,msm-dai-tdm-tert-rx:qcom,msm-dai-q6-tdm-tert-rx-2 dev_id: 0x9024
1335[ 3.427373] msm-dai-q6-tdm soc:qcom,msm-dai-tdm-tert-rx:qcom,msm-dai-q6-tdm-tert-rx-2: msm_dai_q6_tdm_dev_probe: Custom tdm header not supported
1336[ 3.427503] msm-dai-q6-tdm soc:qcom,msm-dai-tdm-tert-rx:qcom,msm-dai-q6-tdm-tert-rx-3: msm_dai_q6_tdm_dev_probe: dev_name: soc:qcom,msm-dai-tdm-tert-rx:qcom,msm-dai-q6-tdm-tert-rx-3 dev_id: 0x9026
1337[ 3.427512] msm-dai-q6-tdm soc:qcom,msm-dai-tdm-tert-rx:qcom,msm-dai-q6-tdm-tert-rx-3: msm_dai_q6_tdm_dev_probe: Custom tdm header not supported
1338[ 3.427533] msm-dai-tdm soc:qcom,msm-dai-tdm-tert-tx: msm_dai_tdm_q6_probe: dev_name: soc:qcom,msm-dai-tdm-tert-tx group_id: 0x9121
1339[ 3.427661] msm-dai-q6-tdm soc:qcom,msm-dai-tdm-tert-tx:qcom,msm-dai-q6-tdm-tert-tx-0: msm_dai_q6_tdm_dev_probe: dev_name: soc:qcom,msm-dai-tdm-tert-tx:qcom,msm-dai-q6-tdm-tert-tx-0 dev_id: 0x9021
1340[ 3.427669] msm-dai-q6-tdm soc:qcom,msm-dai-tdm-tert-tx:qcom,msm-dai-q6-tdm-tert-tx-0: msm_dai_q6_tdm_dev_probe: Custom tdm header not supported
1341[ 3.427798] msm-dai-q6-tdm soc:qcom,msm-dai-tdm-tert-tx:qcom,msm-dai-q6-tdm-tert-tx-1: msm_dai_q6_tdm_dev_probe: dev_name: soc:qcom,msm-dai-tdm-tert-tx:qcom,msm-dai-q6-tdm-tert-tx-1 dev_id: 0x9023
1342[ 3.427805] msm-dai-q6-tdm soc:qcom,msm-dai-tdm-tert-tx:qcom,msm-dai-q6-tdm-tert-tx-1: msm_dai_q6_tdm_dev_probe: Custom tdm header not supported
1343[ 3.427939] msm-dai-q6-tdm soc:qcom,msm-dai-tdm-tert-tx:qcom,msm-dai-q6-tdm-tert-tx-2: msm_dai_q6_tdm_dev_probe: dev_name: soc:qcom,msm-dai-tdm-tert-tx:qcom,msm-dai-q6-tdm-tert-tx-2 dev_id: 0x9025
1344[ 3.427947] msm-dai-q6-tdm soc:qcom,msm-dai-tdm-tert-tx:qcom,msm-dai-q6-tdm-tert-tx-2: msm_dai_q6_tdm_dev_probe: Custom tdm header not supported
1345[ 3.428079] msm-dai-q6-tdm soc:qcom,msm-dai-tdm-tert-tx:qcom,msm-dai-q6-tdm-tert-tx-3: msm_dai_q6_tdm_dev_probe: dev_name: soc:qcom,msm-dai-tdm-tert-tx:qcom,msm-dai-q6-tdm-tert-tx-3 dev_id: 0x9027
1346[ 3.428086] msm-dai-q6-tdm soc:qcom,msm-dai-tdm-tert-tx:qcom,msm-dai-q6-tdm-tert-tx-3: msm_dai_q6_tdm_dev_probe: Custom tdm header not supported
1347[ 3.428105] msm-dai-tdm soc:qcom,msm-dai-tdm-quat-rx: msm_dai_tdm_q6_probe: dev_name: soc:qcom,msm-dai-tdm-quat-rx group_id: 0x9130
1348[ 3.428233] msm-dai-q6-tdm soc:qcom,msm-dai-tdm-quat-rx:qcom,msm-dai-q6-tdm-quat-rx-0: msm_dai_q6_tdm_dev_probe: dev_name: soc:qcom,msm-dai-tdm-quat-rx:qcom,msm-dai-q6-tdm-quat-rx-0 dev_id: 0x9030
1349[ 3.428241] msm-dai-q6-tdm soc:qcom,msm-dai-tdm-quat-rx:qcom,msm-dai-q6-tdm-quat-rx-0: msm_dai_q6_tdm_dev_probe: Custom tdm header not supported
1350[ 3.428370] msm-dai-q6-tdm soc:qcom,msm-dai-tdm-quat-rx:qcom,msm-dai-q6-tdm-quat-rx-1: msm_dai_q6_tdm_dev_probe: dev_name: soc:qcom,msm-dai-tdm-quat-rx:qcom,msm-dai-q6-tdm-quat-rx-1 dev_id: 0x9032
1351[ 3.428378] msm-dai-q6-tdm soc:qcom,msm-dai-tdm-quat-rx:qcom,msm-dai-q6-tdm-quat-rx-1: msm_dai_q6_tdm_dev_probe: Custom tdm header not supported
1352[ 3.428509] msm-dai-q6-tdm soc:qcom,msm-dai-tdm-quat-rx:qcom,msm-dai-q6-tdm-quat-rx-2: msm_dai_q6_tdm_dev_probe: dev_name: soc:qcom,msm-dai-tdm-quat-rx:qcom,msm-dai-q6-tdm-quat-rx-2 dev_id: 0x9034
1353[ 3.428516] msm-dai-q6-tdm soc:qcom,msm-dai-tdm-quat-rx:qcom,msm-dai-q6-tdm-quat-rx-2: msm_dai_q6_tdm_dev_probe: Custom tdm header not supported
1354[ 3.428649] msm-dai-q6-tdm soc:qcom,msm-dai-tdm-quat-rx:qcom,msm-dai-q6-tdm-quat-rx-3: msm_dai_q6_tdm_dev_probe: dev_name: soc:qcom,msm-dai-tdm-quat-rx:qcom,msm-dai-q6-tdm-quat-rx-3 dev_id: 0x9036
1355[ 3.428656] msm-dai-q6-tdm soc:qcom,msm-dai-tdm-quat-rx:qcom,msm-dai-q6-tdm-quat-rx-3: msm_dai_q6_tdm_dev_probe: Custom tdm header not supported
1356[ 3.428675] msm-dai-tdm soc:qcom,msm-dai-tdm-quat-tx: msm_dai_tdm_q6_probe: dev_name: soc:qcom,msm-dai-tdm-quat-tx group_id: 0x9131
1357[ 3.428801] msm-dai-q6-tdm soc:qcom,msm-dai-tdm-quat-tx:qcom,msm-dai-q6-tdm-quat-tx-0: msm_dai_q6_tdm_dev_probe: dev_name: soc:qcom,msm-dai-tdm-quat-tx:qcom,msm-dai-q6-tdm-quat-tx-0 dev_id: 0x9031
1358[ 3.428808] msm-dai-q6-tdm soc:qcom,msm-dai-tdm-quat-tx:qcom,msm-dai-q6-tdm-quat-tx-0: msm_dai_q6_tdm_dev_probe: Custom tdm header not supported
1359[ 3.428940] msm-dai-q6-tdm soc:qcom,msm-dai-tdm-quat-tx:qcom,msm-dai-q6-tdm-quat-tx-1: msm_dai_q6_tdm_dev_probe: dev_name: soc:qcom,msm-dai-tdm-quat-tx:qcom,msm-dai-q6-tdm-quat-tx-1 dev_id: 0x9033
1360[ 3.428947] msm-dai-q6-tdm soc:qcom,msm-dai-tdm-quat-tx:qcom,msm-dai-q6-tdm-quat-tx-1: msm_dai_q6_tdm_dev_probe: Custom tdm header not supported
1361[ 3.429077] msm-dai-q6-tdm soc:qcom,msm-dai-tdm-quat-tx:qcom,msm-dai-q6-tdm-quat-tx-2: msm_dai_q6_tdm_dev_probe: dev_name: soc:qcom,msm-dai-tdm-quat-tx:qcom,msm-dai-q6-tdm-quat-tx-2 dev_id: 0x9035
1362[ 3.429084] msm-dai-q6-tdm soc:qcom,msm-dai-tdm-quat-tx:qcom,msm-dai-q6-tdm-quat-tx-2: msm_dai_q6_tdm_dev_probe: Custom tdm header not supported
1363[ 3.429214] msm-dai-q6-tdm soc:qcom,msm-dai-tdm-quat-tx:qcom,msm-dai-q6-tdm-quat-tx-3: msm_dai_q6_tdm_dev_probe: dev_name: soc:qcom,msm-dai-tdm-quat-tx:qcom,msm-dai-q6-tdm-quat-tx-3 dev_id: 0x9037
1364[ 3.429221] msm-dai-q6-tdm soc:qcom,msm-dai-tdm-quat-tx:qcom,msm-dai-q6-tdm-quat-tx-3: msm_dai_q6_tdm_dev_probe: Custom tdm header not supported
1365[ 3.438753] populate_snd_card_dailinks(): No hifi audio support
1366[ 3.438762] populate_snd_card_dailinks(): smartpa audio support present
1367[ 3.440618] msm8996-asoc-snd soc:sound-9335: ASoC: platform (null) not registered
1368[ 3.442136] GACT probability NOT on
1369[ 3.442151] Mirror/redirect action on
1370[ 3.442164] u32 classifier
1371[ 3.442167] Actions configured
1372[ 3.442181] Netfilter messages via NETLINK v0.30.
1373[ 3.442189] nfnl_acct: registering with nfnetlink.
1374[ 3.442211] nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
1375[ 3.442376] ctnetlink v0.93: registering with nfnetlink.
1376[ 3.442801] xt_time: kernel timezone is -0000
1377[ 3.442948] ip_tables: (C) 2000-2006 Netfilter Core Team
1378[ 3.443022] arp_tables: (C) 2002 David S. Miller
1379[ 3.443045] TCP: cubic registered
1380[ 3.443051] Initializing XFRM netlink socket
1381[ 3.443258] NET: Registered protocol family 10
1382[ 3.443682] mip6: Mobile IPv6
1383[ 3.443699] ip6_tables: (C) 2000-2006 Netfilter Core Team
1384[ 3.443775] sit: IPv6 over IPv4 tunneling driver
1385[ 3.443999] NET: Registered protocol family 17
1386[ 3.444014] NET: Registered protocol family 15
1387[ 3.444035] bridge: automatic filtering via arp/ip/ip6tables has been deprecated. Update your scripts to load br_netfilter if you need this.
1388[ 3.444049] Bridge firewalling registered
1389[ 3.444055] Ebtables v2.0 registered
1390[ 3.444186] Bluetooth: ffffffc0f989bce0
1391[ 3.444228] Bluetooth: ffffffc0f989bcf0
1392[ 3.444232] Bluetooth: ffffffc0f989bcf0
1393[ 3.444238] Bluetooth: ffffffc0f989bcd0
1394[ 3.444245] Bluetooth: ffffffc0f989bd40
1395[ 3.444249] Bluetooth: ffffffc0f989bd20
1396[ 3.444271] l2tp_core: L2TP core driver, V2.0
1397[ 3.444282] l2tp_ppp: PPPoL2TP kernel driver, V2.0
1398[ 3.444288] l2tp_ip: L2TP IP encapsulation support (L2TPv3)
1399[ 3.444303] l2tp_netlink: L2TP netlink interface
1400[ 3.444322] l2tp_eth: L2TP ethernet pseudowire support (L2TPv3)
1401[ 3.444341] l2tp_debugfs: L2TP debugfs support
1402[ 3.444347] l2tp_ip6: L2TP IP encapsulation support for IPv6 (L2TPv3)
1403[ 3.445164] NET: Registered protocol family 27
1404[ 3.447840] subsys-pil-tz 9300000.qcom,lpass: for adsp segments only will be dumped.
1405[ 3.448567] subsys-pil-tz 1c00000.qcom,ssc: for slpi segments only will be dumped.
1406[ 3.449459] pil-q6v5-mss 2080000.qcom,mss: Failed to find the pas_id.
1407[ 3.449937] pil-q6v5-mss 2080000.qcom,mss: for modem segments only will be dumped.
1408[ 3.470604] sps:BAM 0x0000000006b04000 is registered.
1409[ 3.472255] mhl device have registered.
1410[ 3.472422] qpnp-smbcharger qpnp-smbcharger-17: node /soc/qcom,spmi@400f000/qcom,pmi8994@2/qcom,qpnp-smbcharger IO resource absent!
1411[ 3.472444] SMBCHG: smbchg_check_chg_version: pmic=PMI8996, wa_flags=0xf0, hvdcp_supported=true
1412[ 3.472467] SMBCHG: smb_parse_dt: parallel usb thr: 1400, 9v thr: 900
1413[ 3.472694] smbcharger_charger_otg: no parameters
1414[ 3.472805] smbcharger_external_otg: no parameters
1415[ 3.472850] smbcharger_external_otg: supplied by pmi8994_boost_5v
1416[ 3.472929] SMBCHG: smbchg_hw_init: Charger Revision DIG: 2.0; ANA: 2.1
1417[ 3.472945] SMBCHG: smbchg_masked_write_raw: addr = 0x13d0 writing 0xa5
1418[ 3.472968] SMBCHG: smbchg_masked_write_raw: addr = 0x13f4 writing 0x19
1419[ 3.472982] SMBCHG: smbchg_set_aicl_rerun_period_s: aicl rerun period set to 180s
1420[ 3.472996] SMBCHG: smbchg_masked_write_raw: addr = 0x14d0 writing 0xa5
1421[ 3.473018] SMBCHG: smbchg_masked_write_raw: addr = 0x14f5 writing 0x2
1422[ 3.473040] SMBCHG: smbchg_masked_write_raw: addr = 0x13d0 writing 0xa5
1423[ 3.473062] SMBCHG: smbchg_masked_write_raw: addr = 0x13fa writing 0x8
1424[ 3.473083] SMBCHG: smbchg_masked_write_raw: addr = 0x16d0 writing 0xa5
1425[ 3.473105] SMBCHG: smbchg_masked_write_raw: addr = 0x16f6 writing 0x18
1426[ 3.473127] SMBCHG: smbchg_masked_write_raw: addr = 0x1340 writing 0x8
1427[ 3.473148] SMBCHG: smbchg_masked_write_raw: addr = 0x10d0 writing 0xa5
1428[ 3.473171] SMBCHG: smbchg_masked_write_raw: addr = 0x10fc writing 0x42
1429[ 3.473192] SMBCHG: smbchg_masked_write_raw: addr = 0x1242 writing 0x0
1430[ 3.473215] SMBCHG: smbchg_masked_write_raw: addr = 0x10d0 writing 0xa5
1431[ 3.473236] SMBCHG: smbchg_masked_write_raw: addr = 0x10fb writing 0x47
1432[ 3.473258] SMBCHG: smbchg_masked_write_raw: addr = 0x13d0 writing 0xa5
1433[ 3.473279] SMBCHG: smbchg_masked_write_raw: addr = 0x13f4 writing 0x19
1434[ 3.473298] SMBCHG: charging_suspend_vote_cb: !suspend: 0,client:1
1435[ 3.473311] SMBCHG: smbchg_masked_write_raw: addr = 0x1242 writing 0x2
1436[ 3.473325] SMBCHG: usb_suspend_vote_cb: vote usb suspend: 0, client: 7
1437[ 3.473338] SMBCHG: smbchg_masked_write_raw: addr = 0x1340 writing 0x8
1438[ 3.473404] SMBCHG: smbchg_masked_write_raw: addr = 0x10d0 writing 0xa5
1439[ 3.473426] SMBCHG: smbchg_masked_write_raw: addr = 0x10f4 writing 0x2e
1440[ 3.473439] SMBCHG: smbchg_hw_init: set vfloat to 4400
1441[ 3.473452] SMBCHG: smbchg_masked_write_raw: addr = 0x10d0 writing 0xa5
1442[ 3.473474] SMBCHG: smbchg_masked_write_raw: addr = 0x10f3 writing 0x2
1443[ 3.473486] SMBCHG: smbchg_hw_init: set fastchg current comp to 1200
1444[ 3.473499] SMBCHG: smbchg_masked_write_raw: addr = 0x10d0 writing 0xa5
1445[ 3.473521] SMBCHG: smbchg_masked_write_raw: addr = 0x10f5 writing 0x10
1446[ 3.473533] SMBCHG: smbchg_hw_init: set float voltage comp to 16
1447[ 3.473547] SMBCHG: smbchg_masked_write_raw: addr = 0x10d0 writing 0xa5
1448[ 3.473568] SMBCHG: smbchg_masked_write_raw: addr = 0x10f9 writing 0x2
1449[ 3.473581] SMBCHG: smbchg_iterm_set: set tcc (100) to 0x02
1450[ 3.473604] SMBCHG: smbchg_masked_write_raw: addr = 0x13d0 writing 0xa5
1451[ 3.473625] SMBCHG: smbchg_masked_write_raw: addr = 0x13fe writing 0x48
1452[ 3.473647] SMBCHG: smbchg_masked_write_raw: addr = 0x12d0 writing 0xa5
1453[ 3.473668] SMBCHG: smbchg_masked_write_raw: addr = 0x12f3 writing 0xc5
1454[ 3.473682] SMBCHG: smbchg_stay_awake: staying awake: 0x02 (bit 2)
1455[ 3.473689] SMBCHG: smbchg_vfloat_adjust_check: Starting vfloat adjustments
1456[ 3.473733] SMBCHG: smbchg_vfloat_adjust_work: Stopping vfloat adj taper=0 parallel_ma = 0
1457[ 3.473738] SMBCHG: smbchg_relax: relaxing: 0x00 (bit 2)
1458[ 3.473819] SMBCHG: dc_suspend_vote_cb: vote dc suspend: 0,client:0
1459[ 3.473834] SMBCHG: smbchg_masked_write_raw: addr = 0x1340 writing 0x0
1460[ 3.473856] SMBCHG: smbchg_masked_write_raw: addr = 0x10d0 writing 0xa5
1461[ 3.473877] SMBCHG: smbchg_masked_write_raw: addr = 0x10ff writing 0x9
1462[ 3.473891] SMBCHG: smbchg_set_dc_current_max: dc current set to 1500 mA
1463[ 3.473904] SMBCHG: smbchg_masked_write_raw: addr = 0x14d0 writing 0xa5
1464[ 3.473926] SMBCHG: smbchg_masked_write_raw: addr = 0x14f2 writing 0xd
1465[ 3.473949] SMBCHG: smbchg_masked_write_raw: addr = 0x10d0 writing 0xa5
1466[ 3.473971] SMBCHG: smbchg_masked_write_raw: addr = 0x10f2 writing 0x1f
1467[ 3.473984] SMBCHG: smbchg_set_fastchg_current_raw: fastcharge current requested 4500, set to 3000
1468[ 3.474007] SMBCHG: smbchg_masked_write_raw: addr = 0x12d0 writing 0xa5
1469[ 3.474028] SMBCHG: smbchg_masked_write_raw: addr = 0x12fc writing 0x2
1470[ 3.474050] SMBCHG: smbchg_masked_write_raw: addr = 0x12d0 writing 0xa5
1471[ 3.474071] SMBCHG: smbchg_masked_write_raw: addr = 0x12fd writing 0x4
1472[ 3.474093] SMBCHG: smbchg_masked_write_raw: addr = 0x12d0 writing 0xa5
1473[ 3.474114] SMBCHG: smbchg_masked_write_raw: addr = 0x12fe writing 0x0
1474[ 3.474136] SMBCHG: smbchg_masked_write_raw: addr = 0x1340 writing 0x0
1475[ 3.474158] SMBCHG: smbchg_masked_write_raw: addr = 0x16d0 writing 0xa5
1476[ 3.474180] SMBCHG: smbchg_masked_write_raw: addr = 0x16f5 writing 0xf8
1477[ 3.474202] SMBCHG: smbchg_masked_write_raw: addr = 0x16d0 writing 0xa5
1478[ 3.474223] SMBCHG: smbchg_masked_write_raw: addr = 0x16f5 writing 0xb8
1479[ 3.474245] SMBCHG: smbchg_masked_write_raw: addr = 0x16d0 writing 0xa5
1480[ 3.474267] SMBCHG: smbchg_masked_write_raw: addr = 0x16f5 writing 0x38
1481[ 3.474288] SMBCHG: batt_pres_handler: triggered: 0x00
1482[ 3.474293] SMBCHG: smbchg_stay_awake: staying awake: 0x02 (bit 2)
1483[ 3.474298] SMBCHG: smbchg_vfloat_adjust_check: Starting vfloat adjustments
1484[ 3.474328] SMBCHG: smbchg_vfloat_adjust_work: Stopping vfloat adj taper=0 parallel_ma = 0
1485[ 3.474333] SMBCHG: smbchg_relax: relaxing: 0x00 (bit 2)
1486[ 3.474425] SMBCHG: batt_hot_handler: triggered: 0x00
1487[ 3.474430] SMBCHG: smbchg_stay_awake: staying awake: 0x02 (bit 2)
1488[ 3.474435] SMBCHG: smbchg_vfloat_adjust_check: Starting vfloat adjustments
1489[ 3.474464] SMBCHG: smbchg_vfloat_adjust_work: Stopping vfloat adj taper=0 parallel_ma = 0
1490[ 3.474469] SMBCHG: smbchg_relax: relaxing: 0x00 (bit 2)
1491[ 3.474559] SMBCHG: batt_warm_handler: triggered: 0x00
1492[ 3.474585] SMBCHG: batt_cool_handler: triggered: 0x00
1493[ 3.474611] SMBCHG: batt_cold_handler: triggered: 0x00
1494[ 3.474615] SMBCHG: smbchg_stay_awake: staying awake: 0x02 (bit 2)
1495[ 3.474620] SMBCHG: smbchg_vfloat_adjust_check: Starting vfloat adjustments
1496[ 3.474650] SMBCHG: smbchg_vfloat_adjust_work: Stopping vfloat adj taper=0 parallel_ma = 0
1497[ 3.474654] SMBCHG: smbchg_relax: relaxing: 0x00 (bit 2)
1498[ 3.474725] SMBCHG: usbid_change_handler: triggered
1499[ 3.474738] SMBCHG: usbid_change_handler: >>> usbid change handler
1500[ 3.496727] SMBCHG: usbid_change_handler: mhl_wihd is not used.
1501[ 3.496754] SMBCHG: get_rid_state: RID_VALUE[HIGH, LOW] = [0f, ff]
1502[ 3.496973] SMBCHG: determine_initial_status: setting usb psy dp=f dm=f
1503[ 3.497305] SMBCHG: handle_usb_insertion: triggered
1504[ 3.497330] SMBCHG: handle_usb_insertion: inserted type = 4 (SDP)
1505[ 3.497335] SMBCHG: smbchg_change_usb_supply_type: Type 4: setting mA = 100
1506[ 3.497341] SMBCHG: smbchg_set_usb_current_max: USB current_ma = 100
1507[ 3.497356] SMBCHG: smbchg_masked_write_raw: addr = 0x13d0 writing 0xa5
1508[ 3.497378] SMBCHG: smbchg_masked_write_raw: addr = 0x13f4 writing 0x19
1509[ 3.497400] SMBCHG: smbchg_masked_write_raw: addr = 0x1340 writing 0x0
1510[ 3.497413] SMBCHG: smbchg_set_usb_current_max: usb type = 4 current set to 100 mA
1511[ 3.497438] SMBCHG: smbchg_masked_write_raw: addr = 0x12d0 writing 0xa5
1512[ 3.497459] SMBCHG: smbchg_masked_write_raw: addr = 0x12f7 writing 0x3b
1513[ 3.497481] SMBCHG: smbchg_masked_write_raw: addr = 0x12d0 writing 0xa5
1514[ 3.497502] SMBCHG: smbchg_masked_write_raw: addr = 0x12f8 writing 0x26
1515[ 3.497515] SMBCHG: handle_usb_insertion: setting usb psy present = 1
1516[ 3.497524] SMBCHG: handle_usb_insertion: setting usb psy health GOOD
1517[ 3.497922] i2c-msm-v2 75b5000.i2c: msm_bus_scale_register_client(mstr-id:84):0x25 (ok)
1518[ 3.498270] msm-dwc3 6a00000.ssusb: undefined state
1519[ 3.498419] SMBCHG: smbchg_usb_update_online_work: setting usb psy online = 1
1520[ 3.501646] SMBCHG: smbchg_calc_max_flash_current: avail_iflash=-19525038, ocv=-22, ibat=484956, rbatt=99978
1521[ 3.502510] SMBCHG: smbchg_calc_max_flash_current: avail_iflash=-19580168, ocv=-22, ibat=573876, rbatt=99978
1522[ 3.505320] qpnp-smbcharger qpnp-smbcharger-17: node /soc/qcom,spmi@400f000/qcom,pmi8994@2/qcom,qpnp-smbcharger IO resource absent!
1523[ 3.505329] SMBCHG: smbchg_probe: setting usb psy present = 1
1524[ 3.535503] msm-usb-ssphy-qmp 7410000.ssphy: QMP PHY initialization timeout
1525[ 3.535513] msm-usb-ssphy-qmp 7410000.ssphy: USB3_PHY_PCS_STATUS:69696969
1526[ 3.536917] SMBCHG: dump_reg: CHGR Status - 100B = 02
1527[ 3.536931] SMBCHG: dump_reg: CHGR Status - 100C = 6E
1528[ 3.536945] SMBCHG: dump_reg: CHGR Status - 100D = 7F
1529[ 3.536959] SMBCHG: dump_reg: CHGR Status - 100E = 80
1530[ 3.536972] SMBCHG: dump_reg: CHGR Status - 100F = 00
1531[ 3.536985] SMBCHG: dump_reg: CHGR Status - 1010 = 00
1532[ 3.536998] SMBCHG: dump_reg: CHGR Config - 10F0 = 0F
1533[ 3.537011] SMBCHG: dump_reg: CHGR Config - 10F1 = 03
1534[ 3.537024] SMBCHG: dump_reg: CHGR Config - 10F2 = 1F
1535[ 3.537037] SMBCHG: dump_reg: CHGR Config - 10F3 = 02
1536[ 3.537050] SMBCHG: dump_reg: CHGR Config - 10F4 = 2E
1537[ 3.537062] SMBCHG: dump_reg: CHGR Config - 10F5 = 10
1538[ 3.537075] SMBCHG: dump_reg: CHGR Config - 10F6 = 00
1539[ 3.537088] SMBCHG: dump_reg: CHGR Config - 10F7 = 01
1540[ 3.537101] SMBCHG: dump_reg: CHGR Config - 10F8 = 03
1541[ 3.537113] SMBCHG: dump_reg: CHGR Config - 10F9 = 02
1542[ 3.537126] SMBCHG: dump_reg: CHGR Config - 10FA = 1F
1543[ 3.537139] SMBCHG: dump_reg: CHGR Config - 10FB = 47
1544[ 3.537152] SMBCHG: dump_reg: CHGR Config - 10FC = 42
1545[ 3.537165] SMBCHG: dump_reg: CHGR Config - 10FD = 0F
1546[ 3.537177] SMBCHG: dump_reg: CHGR Config - 10FE = 00
1547[ 3.537190] SMBCHG: dump_reg: CHGR Config - 10FF = 09
1548[ 3.537203] SMBCHG: dump_reg: BAT_IF Status - 1210 = 00
1549[ 3.537216] SMBCHG: dump_reg: BAT_IF Command - 1242 = 02
1550[ 3.537229] SMBCHG: dump_reg: BAT_IF Config - 12F0 = 0F
1551[ 3.537242] SMBCHG: dump_reg: BAT_IF Config - 12F1 = 04
1552[ 3.537255] SMBCHG: dump_reg: BAT_IF Config - 12F2 = 06
1553[ 3.537268] SMBCHG: dump_reg: BAT_IF Config - 12F3 = C5
1554[ 3.537280] SMBCHG: dump_reg: BAT_IF Config - 12F4 = 02
1555[ 3.537293] SMBCHG: dump_reg: BAT_IF Config - 12F5 = 03
1556[ 3.537306] SMBCHG: dump_reg: BAT_IF Config - 12F6 = 02
1557[ 3.537319] SMBCHG: dump_reg: BAT_IF Config - 12F7 = 3B
1558[ 3.537332] SMBCHG: dump_reg: BAT_IF Config - 12F8 = 26
1559[ 3.537344] SMBCHG: dump_reg: BAT_IF Config - 12F9 = 04
1560[ 3.537357] SMBCHG: dump_reg: BAT_IF Config - 12FA = D8
1561[ 3.537370] SMBCHG: dump_reg: BAT_IF Config - 12FB = 39
1562[ 3.537383] SMBCHG: dump_reg: USB Status - 1307 = 10
1563[ 3.537396] SMBCHG: dump_reg: USB Status - 1308 = 02
1564[ 3.537408] SMBCHG: dump_reg: USB Status - 1309 = 12
1565[ 3.537421] SMBCHG: dump_reg: USB Status - 130A = 08
1566[ 3.537434] SMBCHG: dump_reg: USB Status - 130B = 08
1567[ 3.537447] SMBCHG: dump_reg: USB Status - 130C = 00
1568[ 3.537460] SMBCHG: dump_reg: USB Status - 130D = 08
1569[ 3.537472] SMBCHG: dump_reg: USB Status - 130E = 0F
1570[ 3.537485] SMBCHG: dump_reg: USB Status - 130F = FF
1571[ 3.537498] SMBCHG: dump_reg: USB Status - 1310 = 04
1572[ 3.537511] SMBCHG: dump_reg: USB Command - 1340 = 00
1573[ 3.537523] SMBCHG: dump_reg: USB Config - 13F0 = 0F
1574[ 3.537536] SMBCHG: dump_reg: USB Config - 13F1 = 02
1575[ 3.537549] SMBCHG: dump_reg: USB Config - 13F2 = 0D
1576[ 3.537562] SMBCHG: dump_reg: USB Config - 13F3 = 04
1577[ 3.537574] SMBCHG: dump_reg: USB Config - 13F4 = 19
1578[ 3.537587] SMBCHG: dump_reg: USB Config - 13F5 = AB
1579[ 3.537600] SMBCHG: dump_reg: DC Status - 1410 = 01
1580[ 3.537613] SMBCHG: dump_reg: DC Config - 14F0 = 0F
1581[ 3.537626] SMBCHG: dump_reg: DC Config - 14F1 = 02
1582[ 3.537639] SMBCHG: dump_reg: DC Config - 14F2 = 0D
1583[ 3.537651] SMBCHG: dump_reg: DC Config - 14F3 = 04
1584[ 3.537664] SMBCHG: dump_reg: DC Config - 14F4 = 00
1585[ 3.537677] SMBCHG: dump_reg: DC Config - 14F5 = 02
1586[ 3.537690] SMBCHG: dump_reg: DC Config - 14F6 = 0C
1587[ 3.537702] SMBCHG: dump_reg: MISC Status - 1608 = 10
1588[ 3.537715] SMBCHG: dump_reg: MISC Status - 1610 = 01
1589[ 3.537728] SMBCHG: dump_reg: MISC CFG - 16F0 = 0F
1590[ 3.537741] SMBCHG: dump_reg: MISC CFG - 16F1 = 00
1591[ 3.537753] SMBCHG: dump_reg: MISC CFG - 16F2 = 12
1592[ 3.537766] SMBCHG: dump_reg: MISC CFG - 16F3 = 02
1593[ 3.537806] qpnp-smbcharger qpnp-smbcharger-17: SMBCHG successfully probe Charger version=SCHG Revision DIG:2.0 ANA:2.1 batt=1 dc=0 usb=1
1594[ 3.537821] SMBCHG: smbchg_masked_write_raw: addr = 0x13d0 writing 0xa5
1595[ 3.537844] SMBCHG: smbchg_masked_write_raw: addr = 0x13fc writing 0x93
1596[ 3.537867] SMBCHG: smbchg_masked_write_raw: addr = 0x1242 writing 0x2
1597[ 3.537888] msm-dwc3 6a00000.ssusb: b_peripheral state
1598[ 3.537940] SMBCHG: smbchg_cc_esr_wa_check: Not in fast charge, skipping
1599[ 3.537945] SMBCHG: smbchg_config_chg_battery_type: Battery-type not identified
1600[ 3.537968] SMBCHG: smbchg_external_power_changed: usb type = SDP current_limit = 0
1601[ 3.537974] SMBCHG: smbchg_set_usb_current_max: USB current_ma = 0
1602[ 3.537978] SMBCHG: usb_suspend_vote_cb: vote usb suspend: 1, client: 2
1603[ 3.537992] SMBCHG: smbchg_masked_write_raw: addr = 0x1340 writing 0x10
1604[ 3.538005] SMBCHG: smbchg_set_usb_current_max: usb type = 4 current set to 0 mA
1605[ 3.538050] SMBCHG: smbchg_stay_awake: staying awake: 0x01 (bit 1)
1606[ 3.538056] SMBCHG: smbchg_vfloat_adjust_check: Starting vfloat adjustments
1607[ 3.538060] SMBCHG: power_ok_handler: triggered: 0x00
1608[ 3.538229] SMBCHG: smbchg_vfloat_adjust_work: Stopping vfloat adj taper=0 parallel_ma = 0
1609[ 3.538381] SMBCHG: smbchg_calc_max_flash_current: avail_iflash=-19607733, ocv=-22, ibat=618336, rbatt=99978
1610[ 3.543410] SMBCHG: smbchg_masked_write_raw: addr = 0x1242 writing 0x0
1611[ 3.543895] populate_snd_card_dailinks(): No hifi audio support
1612[ 3.543899] populate_snd_card_dailinks(): smartpa audio support present
1613[ 3.545715] msm8996-asoc-snd soc:sound-9335: ASoC: platform (null) not registered
1614[ 3.548700] fastrpc soc:qcom,msm-adsprpc-mem: for adsp_rh segments only will be dumped.
1615[ 3.548798] adsprpc: channel link type: 0
1616[ 3.555788] populate_snd_card_dailinks(): No hifi audio support
1617[ 3.555797] populate_snd_card_dailinks(): smartpa audio support present
1618[ 3.557656] msm8996-asoc-snd soc:sound-9335: ASoC: platform (null) not registered
1619[ 3.559012] RNDIS_IPA module is loaded.
1620[ 3.560434] file system registered
1621[ 3.560467] mbim_init: initialize 1 instances
1622[ 3.561033] populate_snd_card_dailinks(): No hifi audio support
1623[ 3.561039] populate_snd_card_dailinks(): smartpa audio support present
1624[ 3.562963] msm8996-asoc-snd soc:sound-9335: ASoC: platform (null) not registered
1625[ 3.563236] mbim_init: Initialized 1 ports
1626[ 3.564329] rndis_qc_init: initialize rndis QC instance
1627[ 3.564475] Number of LUNs=8
1628[ 3.564483] Mass Storage Function, version: 2009/09/11
1629[ 3.564487] LUN: removable file: (no medium)
1630[ 3.564497] Number of LUNs=1
1631[ 3.564522] LUN: removable file: (no medium)
1632[ 3.564525] Number of LUNs=1
1633[ 3.564686] android_usb gadget: android_usb ready
1634[ 3.565250] populate_snd_card_dailinks(): No hifi audio support
1635[ 3.565259] populate_snd_card_dailinks(): smartpa audio support present
1636[ 3.567207] msm8996-asoc-snd soc:sound-9335: ASoC: platform (null) not registered
1637[ 3.567603] input: gpio-keys as /devices/soc/soc:gpio_keys/input/input5
1638[ 3.568049] qcom,qpnp-rtc qpnp-rtc-8: setting system clock to 1970-01-31 03:25:07 UTC (2604307)
1639[ 3.568238] populate_snd_card_dailinks(): No hifi audio support
1640[ 3.568244] populate_snd_card_dailinks(): smartpa audio support present
1641[ 3.570264] msm8996-asoc-snd soc:sound-9335: ASoC: platform (null) not registered
1642[ 3.571058] populate_snd_card_dailinks(): No hifi audio support
1643[ 3.571066] populate_snd_card_dailinks(): smartpa audio support present
1644[ 3.572926] msm8996-asoc-snd soc:sound-9335: ASoC: platform (null) not registered
1645[ 3.573724] populate_snd_card_dailinks(): No hifi audio support
1646[ 3.573734] populate_snd_card_dailinks(): smartpa audio support present
1647[ 3.576007] msm8996-asoc-snd soc:sound-9335: ASoC: platform (null) not registered
1648[ 3.576552] lmh_lite:lmh_parse_sensor Registering sensor:[DLMt_APC1]
1649[ 3.576818] lmh_lite:lmh_parse_sensor Registering sensor:[LLM_cp00]
1650[ 3.576951] lmh_lite:lmh_parse_sensor Registering sensor:[LLM_cp01]
1651[ 3.577075] lmh_lite:lmh_parse_sensor Registering sensor:[LLM_cp10]
1652[ 3.577196] lmh_lite:lmh_parse_sensor Registering sensor:[LLM_cp11]
1653[ 3.577321] lmh_lite:lmh_parse_sensor Registering sensor:[LLM_m4m0]
1654[ 3.577448] lmh_lite:lmh_parse_sensor Registering sensor:[LLM_l21-]
1655[ 3.577571] lmh_lite:lmh_parse_sensor Registering sensor:[LLM_l20-]
1656[ 3.578802] populate_snd_card_dailinks(): No hifi audio support
1657[ 3.578811] populate_snd_card_dailinks(): smartpa audio support present
1658[ 3.580768] msm8996-asoc-snd soc:sound-9335: ASoC: platform (null) not registered
1659[ 3.580860] parse_cpu_levels: idx 1 545
1660[ 3.580866] parse_cpu_levels: idx 2 1785
1661[ 3.580869] parse_cpu_levels: idx 2 3025
1662[ 3.580924] parse_cpu_levels: idx 1 545
1663[ 3.580928] parse_cpu_levels: idx 2 1785
1664[ 3.580931] parse_cpu_levels: idx 2 3025
1665[ 3.581761] populate_snd_card_dailinks(): No hifi audio support
1666[ 3.581770] populate_snd_card_dailinks(): smartpa audio support present
1667[ 3.583733] msm8996-asoc-snd soc:sound-9335: ASoC: platform (null) not registered
1668[ 3.584239] qcom,qpnp-flash-led qpnp-flash-led-26: Unable to acquire pinctrl
1669[ 3.585090] populate_snd_card_dailinks(): No hifi audio support
1670[ 3.585099] populate_snd_card_dailinks(): smartpa audio support present
1671[ 3.586657] rmnet_ipa started initialization
1672[ 3.586673] IPA SSR support = True
1673[ 3.586729] IPA ipa-loaduC = True
1674[ 3.586735] IPA SG support = True
1675[ 3.586993] msm8996-asoc-snd soc:sound-9335: ASoC: platform (null) not registered
1676[ 3.588443] ipa ipa_sps_irq_control_all:938 EP (5) not allocated.
1677[ 3.588451] ipa ipa2_uc_state_check:301 uC is not loaded
1678[ 3.589213] rmnet_ipa completed initialization
1679[ 3.589500] populate_snd_card_dailinks(): No hifi audio support
1680[ 3.589505] populate_snd_card_dailinks(): smartpa audio support present
1681[ 3.591508] msm8996-asoc-snd soc:sound-9335: ASoC: platform (null) not registered
1682[ 3.594282] qcom,cc-debug-8996 362000.qcom,cc-debug: Registered debug mux.
1683[ 3.594685] populate_snd_card_dailinks(): No hifi audio support
1684[ 3.594694] populate_snd_card_dailinks(): smartpa audio support present
1685[ 3.596017] wlan_en_vreg: disabling
1686[ 3.596022] rome_vreg: disabling
1687[ 3.596026] gdsc_mmagic_bimc: disabling
1688[ 3.596064] kryo1-retention: disabling
1689[ 3.596068] kryo0-retention: disabling
1690[ 3.596072] gfx_mem_acc_corner: disabling
1691[ 3.596075] apcc_l3_mem_acc_corner: disabling
1692[ 3.596078] apc1_perfcl_mem_acc_corner: disabling
1693[ 3.596081] apc0_pwrcl_mem_acc_corner: disabling
1694[ 3.596089] regulator_proxy_consumer_remove_all: removing regulator proxy consumer requests
1695[ 3.596377] clock_late_init: Removing enables held for handed-off clocks
1696[ 3.597108] msm8996-asoc-snd soc:sound-9335: ASoC: platform (null) not registered
1697[ 3.600370] ALSA device list:
1698[ 3.600376] No soundcards found.
1699[ 3.600418] Warning: unable to open an initial console.
1700[ 3.600548] Freeing unused kernel memory: 492K (ffffffc00156c000 - ffffffc0015e7000)
1701[ 3.600561] Freeing alternatives memory: 84K (ffffffc0015e7000 - ffffffc0015fc000)
1702[ 4.040079] SMBCHG: smbchg_parallel_usb_en_work: AICL at 1700
1703[ 4.040115] SMBCHG: smbchg_is_parallel_usb_ok: Not in fast charge, skipping
1704[ 4.040121] SMBCHG: smbchg_relax: relaxing: 0x00 (bit 1)
1705[ 5.573600] of_batterydata_get_best_profile: battery_id_ohm : 10 (kohm)
1706[ 5.573617] of_batterydata_get_best_profile: 2257929_letv_x2_3200mah_averaged_masterslave_dec21st2015 found
1707[ 5.583588] FG: fg_batt_profile_init: Battery SOC: 67, V: 3915535uV
1708[ 5.583753] SMBCHG: charging_suspend_vote_cb: !suspend: 1,client:1
1709[ 5.583775] SMBCHG: smbchg_masked_write_raw: addr = 0x1242 writing 0x0
1710[ 5.583851] SMBCHG: smbchg_cc_esr_wa_check: Not in fast charge, skipping
1711[ 5.583862] SMBCHG: smbchg_config_chg_battery_type: No batterydata available
1712[ 5.583892] SMBCHG: smbchg_external_power_changed: usb type = SDP current_limit = 0
1713[ 5.583898] SMBCHG: smbchg_stay_awake: staying awake: 0x02 (bit 2)
1714[ 5.583903] SMBCHG: smbchg_vfloat_adjust_check: Starting vfloat adjustments
1715[ 5.584340] SMBCHG: smbchg_vfloat_adjust_work: Stopping vfloat adj taper=0 parallel_ma = 0
1716[ 5.584355] SMBCHG: smbchg_relax: relaxing: 0x00 (bit 2)
1717[ 5.584670] SMBCHG: smbchg_calc_max_flash_current: avail_iflash=2140907, ocv=3975501, ibat=751716, rbatt=208215
1718[ 5.585516] SMBCHG: smbchg_calc_max_flash_current: avail_iflash=2085777, ocv=3975501, ibat=840636, rbatt=208215
1719[ 5.918261] EXT3-fs (sda9): error: couldn't mount because of unsupported optional features (40)
1720[ 5.918554] EXT2-fs (sda9): error: couldn't mount because of unsupported optional features (44)
1721[ 5.923983] EXT4-fs (sda9): recovery complete
1722[ 5.924367] EXT4-fs (sda9): mounted filesystem with ordered data mode. Opts: (null)
1723[ 6.035778] enable_store: android_usb: already disabled
1724[ 6.039362] dwc3 6a00000.dwc3: request ffffffc0335b3300 was not queued to ep0out
1725[ 6.040292] rndis_function_bind_config: rndis_function_bind_config MAC: 00:00:00:00:00:00
1726[ 6.040321] android_usb gadget: using random self ethernet address
1727[ 6.040327] android_usb gadget: using random host ethernet address
1728[ 6.040617] rndis0: MAC 52:51:0a:a2:82:8d
1729[ 6.040622] rndis0: HOST MAC 0a:81:aa:f3:d5:97
1730[ 6.077208] IPv6: ADDRCONF(NETDEV_UP): rndis0: link is not ready
1731[ 6.089174] random: init-debug urandom read with 43 bits of entropy available
1732[ 6.225855] android_work: android_work: sent uevent USB_STATE=CONNECTED
1733[ 6.269745] android_usb gadget: high-speed config #1: 66bf0c8.android_usb
1734[ 6.269832] msm-dwc3 6a00000.ssusb: Avail curr from USB = 500
1735[ 6.269907] IPv6: ADDRCONF(NETDEV_CHANGE): rndis0: link becomes ready
1736[ 6.270043] SMBCHG: smbchg_config_chg_battery_type: No batterydata available
1737[ 6.270080] SMBCHG: smbchg_external_power_changed: usb type = SDP current_limit = 500
1738[ 6.270086] SMBCHG: smbchg_set_usb_current_max: USB current_ma = 500
1739[ 6.270091] SMBCHG: usb_suspend_vote_cb: vote usb suspend: 0, client: 2
1740[ 6.270109] SMBCHG: smbchg_masked_write_raw: addr = 0x1340 writing 0x0
1741[ 6.270137] SMBCHG: smbchg_masked_write_raw: addr = 0x13d0 writing 0xa5
1742[ 6.270164] SMBCHG: smbchg_masked_write_raw: addr = 0x13f4 writing 0x19
1743[ 6.270232] SMBCHG: smbchg_masked_write_raw: addr = 0x1340 writing 0x2
1744[ 6.270246] SMBCHG: power_ok_handler: triggered: 0x01
1745[ 6.270256] SMBCHG: smbchg_set_usb_current_max: usb type = 4 current set to 500 mA
1746[ 6.270273] SMBCHG: smbchg_stay_awake: staying awake: 0x01 (bit 1)
1747[ 6.270280] SMBCHG: smbchg_vfloat_adjust_check: Starting vfloat adjustments
1748[ 6.271032] SMBCHG: smbchg_vfloat_adjust_work: Stopping vfloat adj taper=0 parallel_ma = 0
1749[ 6.271234] SMBCHG: smbchg_calc_max_flash_current: avail_iflash=2196038, ocv=3975501, ibat=662796, rbatt=208215
1750[ 6.323383] android_work: android_work: sent uevent USB_STATE=CONFIGURED
1751[ 6.371026] SMBCHG: fastchg_handler: p2f triggered
1752[ 6.371067] SMBCHG: smbchg_vfloat_adjust_check: Starting vfloat adjustments
1753[ 6.371338] SMBCHG: smbchg_calc_max_flash_current: avail_iflash=2581950, ocv=3975501, ibat=40356, rbatt=208215
1754[ 6.371430] SMBCHG: smbchg_vfloat_adjust_work: Stopping vfloat adj taper=0 parallel_ma = 0
1755[ 6.773400] SMBCHG: smbchg_parallel_usb_en_work: AICL at 1700
1756[ 6.773433] SMBCHG: smbchg_is_parallel_usb_ok: SDP adapter, skipping
1757[ 6.773440] SMBCHG: smbchg_relax: relaxing: 0x00 (bit 1)
1758[ 7.130493] EXT4-fs (sda9): re-mounted. Opts: (null)
1759[ 7.139484] preinit: (7.13) Welcome to SailfishOS 2.1.3.7 (Kymijoki) (armv7hl)
1760[ 7.151056] preinit: (7.15) is_erase_needed: No : 0
1761[ 7.171646] preinit: (7.17) get_bootstate: USER : 0
1762[ 7.171986] preinit: (7.17) BOOTSTATE = USER
1763[ 7.172638] preinit: (7.17) Booting to default.target
1764[ 7.188427] systemd[1]: systemd 225 running in system mode. (+PAM -AUDIT -SELINUX +IMA -APPARMOR +SMACK -SYSVINIT +UTMP -LIBCRYPTSETUP +GCRYPT -GNUTLS +ACL +XZ -LZ4 -SECCOMP +BLKID -ELFUTILS +KMOD -IDN)
1765[ 7.188672] systemd[1]: Detected architecture arm64.
1766[ 7.189163] systemd[1]: Set hostname to <Sailfish>.
1767[ 7.206378] ufshcd 624000.ufshc: ufshcd_ioctl: User buffer is NULL!
1768[ 7.275037] systemd[1]: sys-fs-pstore.mount: Cannot create mount unit for API file system /sys/fs/pstore. Refusing.
1769[ 7.276765] SMBCHG: smbchg_parallel_usb_en_work: AICL at 1700
1770[ 7.276801] SMBCHG: smbchg_is_parallel_usb_ok: SDP adapter, skipping
1771[ 7.305025] systemd[1]: sys-fs-pstore.mount: Cannot add dependency job, ignoring: Unit sys-fs-pstore.mount failed to load: Invalid argument. See system logs and 'systemctl status sys-fs-pstore.mount' for details.
1772[ 7.306979] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
1773[ 7.307077] systemd[1]: Reached target Swap.
1774[ 7.307145] systemd[1]: Reached target Login Prompts.
1775[ 7.307287] systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
1776[ 7.307533] systemd[1]: Created slice Root Slice.
1777[ 7.307864] systemd[1]: Created slice User and Session Slice.
1778[ 7.308040] systemd[1]: Listening on Journal Socket.
1779[ 7.308167] systemd[1]: Listening on Journal Socket (/dev/log).
1780[ 7.308637] systemd[1]: Created slice System Slice.
1781[ 7.310622] systemd[1]: Mounting Temporary Directory...
1782[ 7.311931] systemd[1]: Mounting Droid mount for /dev/stune...
1783[ 7.313955] systemd[1]: Starting Create list of required static device nodes for the current kernel...
1784[ 7.315210] systemd[1]: Mounting FFS mount...
1785[ 7.316534] systemd[1]: Starting Remount Root and Kernel File Systems...
1786[ 7.316589] systemd[1]: Reached target Slices.
1787[ 7.317997] systemd[1]: Starting Journal Service...
1788[ 7.319339] systemd[1]: Starting Setup Virtual Console...
1789[ 7.326818] systemd[1]: Mounting Debug File System...
1790[ 7.329080] systemd[1]: Mounting Droid mount for /dev/cpuset...
1791[ 7.330686] systemd[1]: Mounting Droid mount for /dev/cpuctl...
1792[ 7.331445] cgroup: new mount options do not match the existing superblock, will be ignored
1793[ 7.332262] systemd[1]: Mounting Droid mount for /dev/bfqio...
1794[ 7.332500] systemd[1]: Listening on udev Kernel Socket.
1795[ 7.332710] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
1796[ 7.332909] systemd[1]: Listening on udev Control Socket.
1797[ 7.336039] systemd[1]: Mounted Debug File System.
1798[ 7.336148] systemd[1]: Mounted Temporary Directory.
1799[ 7.336229] systemd[1]: Mounted FFS mount.
1800[ 7.336307] systemd[1]: Mounted Droid mount for /dev/stune.
1801[ 7.336385] systemd[1]: Mounted Droid mount for /dev/cpuset.
1802[ 7.337954] systemd[1]: Started Create list of required static device nodes for the current kernel.
1803[ 7.339280] systemd[1]: Started Setup Virtual Console.
1804[ 7.340423] systemd[1]: dev-cpuctl.mount: Mount process exited, code=exited status=32
1805[ 7.340859] systemd[1]: Failed to mount Droid mount for /dev/cpuctl.
1806[ 7.340940] systemd[1]: dev-cpuctl.mount: Unit entered failed state.
1807[ 7.349708] EXT4-fs (sda9): re-mounted. Opts: (null)
1808[ 7.350533] systemd[1]: Mounted Droid mount for /dev/bfqio.
1809[ 7.385193] systemd[1]: Started Remount Root and Kernel File Systems.
1810[ 7.417818] systemd[1]: Starting udev Coldplug all Devices...
1811[ 7.419313] systemd[1]: Starting Load/Save Random Seed...
1812[ 7.420756] systemd[1]: Starting Clean RPM db region files at each reboot...
1813[ 7.422412] systemd[1]: Starting Create Static Device Nodes in /dev...
1814[ 7.434520] systemd[1]: Started Load/Save Random Seed.
1815[ 7.436060] systemd[1]: Started Clean RPM db region files at each reboot.
1816[ 7.441430] systemd[1]: Started Create Static Device Nodes in /dev.
1817[ 7.446065] systemd[1]: Started Journal Service.
1818[ 7.486327] systemd-journald[629]: Received request to flush runtime journal from PID 1
1819[ 7.683320] SMBCHG: smbchg_calc_max_flash_current: avail_iflash=2692211, ocv=3975501, ibat=-137484, rbatt=208215
1820[ 7.763237] SMBCHG: smbchg_calc_max_flash_current: avail_iflash=2692211, ocv=3975501, ibat=-137484, rbatt=208215
1821[ 7.947060] ufshcd 624000.ufshc: ufshcd_ioctl: User buffer is NULL!
1822[ 7.949127] ufshcd 624000.ufshc: ufshcd_ioctl: User buffer is NULL!
1823[ 7.954187] ufshcd 624000.ufshc: ufshcd_ioctl: User buffer is NULL!
1824[ 7.956428] ufshcd 624000.ufshc: ufshcd_ioctl: User buffer is NULL!
1825[ 7.962304] ufshcd 624000.ufshc: ufshcd_ioctl: User buffer is NULL!
1826[ 7.965599] ufshcd 624000.ufshc: ufshcd_ioctl: User buffer is NULL!
1827[ 7.966848] ufshcd 624000.ufshc: ufshcd_ioctl: User buffer is NULL!
1828[ 7.968628] ufshcd 624000.ufshc: ufshcd_ioctl: User buffer is NULL!
1829[ 7.973107] ufshcd 624000.ufshc: ufshcd_ioctl: User buffer is NULL!
1830[ 7.973213] ufshcd 624000.ufshc: ufshcd_ioctl: User buffer is NULL!
1831[ 7.974847] ufshcd 624000.ufshc: ufshcd_ioctl: User buffer is NULL!
1832[ 7.980403] ufshcd 624000.ufshc: ufshcd_ioctl: User buffer is NULL!
1833[ 7.982939] ufshcd 624000.ufshc: ufshcd_ioctl: User buffer is NULL!
1834[ 7.984821] ufshcd 624000.ufshc: ufshcd_ioctl: User buffer is NULL!
1835[ 7.984945] ufshcd 624000.ufshc: ufshcd_ioctl: User buffer is NULL!
1836[ 7.997544] ufshcd 624000.ufshc: ufshcd_ioctl: User buffer is NULL!
1837[ 7.998770] ufshcd 624000.ufshc: ufshcd_ioctl: User buffer is NULL!
1838[ 8.003194] ufshcd 624000.ufshc: ufshcd_ioctl: User buffer is NULL!
1839[ 8.009771] ufshcd 624000.ufshc: ufshcd_ioctl: User buffer is NULL!
1840[ 8.009988] ufshcd 624000.ufshc: ufshcd_ioctl: User buffer is NULL!
1841[ 8.017590] ufshcd 624000.ufshc: ufshcd_ioctl: User buffer is NULL!
1842[ 8.023223] ufshcd 624000.ufshc: ufshcd_ioctl: User buffer is NULL!
1843[ 8.031031] ufshcd 624000.ufshc: ufshcd_ioctl: User buffer is NULL!
1844[ 8.032005] ufshcd 624000.ufshc: ufshcd_ioctl: User buffer is NULL!
1845[ 8.034382] ufshcd 624000.ufshc: ufshcd_ioctl: User buffer is NULL!
1846[ 8.044576] ufshcd 624000.ufshc: ufshcd_ioctl: User buffer is NULL!
1847[ 8.080829] ufshcd 624000.ufshc: ufshcd_ioctl: User buffer is NULL!
1848[ 8.080877] ufshcd 624000.ufshc: ufshcd_ioctl: User buffer is NULL!
1849[ 8.095330] ufshcd 624000.ufshc: ufshcd_ioctl: User buffer is NULL!
1850[ 8.102116] ufshcd 624000.ufshc: ufshcd_ioctl: User buffer is NULL!
1851[ 8.102255] ufshcd 624000.ufshc: ufshcd_ioctl: User buffer is NULL!
1852[ 8.127107] ufshcd 624000.ufshc: ufshcd_ioctl: User buffer is NULL!
1853[ 8.134371] ufshcd 624000.ufshc: ufshcd_ioctl: User buffer is NULL!
1854[ 8.135852] ufshcd 624000.ufshc: ufshcd_ioctl: User buffer is NULL!
1855[ 8.146451] ufshcd 624000.ufshc: ufshcd_ioctl: User buffer is NULL!
1856[ 8.153520] ufshcd 624000.ufshc: ufshcd_ioctl: User buffer is NULL!
1857[ 8.154197] ufshcd 624000.ufshc: ufshcd_ioctl: User buffer is NULL!
1858[ 8.155599] ufshcd 624000.ufshc: ufshcd_ioctl: User buffer is NULL!
1859[ 8.158269] ufshcd 624000.ufshc: ufshcd_ioctl: User buffer is NULL!
1860[ 8.165248] ufshcd 624000.ufshc: ufshcd_ioctl: User buffer is NULL!
1861[ 8.169544] ufshcd 624000.ufshc: ufshcd_ioctl: User buffer is NULL!
1862[ 8.171311] ufshcd 624000.ufshc: ufshcd_ioctl: User buffer is NULL!
1863[ 8.188045] ufshcd 624000.ufshc: ufshcd_ioctl: User buffer is NULL!
1864[ 8.189739] ufshcd 624000.ufshc: ufshcd_ioctl: User buffer is NULL!
1865[ 8.203195] EXT4-fs (sde13): mounted filesystem with ordered data mode. Opts: barrier=1
1866[ 8.220086] ufshcd 624000.ufshc: ufshcd_ioctl: User buffer is NULL!
1867[ 8.222725] ufshcd 624000.ufshc: ufshcd_ioctl: User buffer is NULL!
1868[ 8.223670] ufshcd 624000.ufshc: ufshcd_ioctl: User buffer is NULL!
1869[ 8.226192] ufshcd 624000.ufshc: ufshcd_ioctl: User buffer is NULL!
1870[ 8.229709] ufshcd 624000.ufshc: ufshcd_ioctl: User buffer is NULL!
1871[ 8.235752] ufshcd 624000.ufshc: ufshcd_ioctl: User buffer is NULL!
1872[ 8.250682] ufshcd 624000.ufshc: ufshcd_ioctl: User buffer is NULL!
1873[ 8.267293] ufshcd 624000.ufshc: ufshcd_ioctl: User buffer is NULL!
1874[ 8.301347] ufshcd 624000.ufshc: ufshcd_ioctl: User buffer is NULL!
1875[ 8.324937] ufshcd 624000.ufshc: ufshcd_ioctl: User buffer is NULL!
1876[ 8.325038] ufshcd 624000.ufshc: ufshcd_ioctl: User buffer is NULL!
1877[ 8.327837] ufshcd 624000.ufshc: ufshcd_ioctl: User buffer is NULL!
1878[ 8.330110] ufshcd 624000.ufshc: ufshcd_ioctl: User buffer is NULL!
1879[ 8.332029] ufshcd 624000.ufshc: ufshcd_ioctl: User buffer is NULL!
1880[ 8.334799] ufshcd 624000.ufshc: ufshcd_ioctl: User buffer is NULL!
1881[ 8.334852] ufshcd 624000.ufshc: ufshcd_ioctl: User buffer is NULL!
1882[ 8.336814] ufshcd 624000.ufshc: ufshcd_ioctl: User buffer is NULL!
1883[ 8.338798] ufshcd 624000.ufshc: ufshcd_ioctl: User buffer is NULL!
1884[ 8.340077] ufshcd 624000.ufshc: ufshcd_ioctl: User buffer is NULL!
1885[ 8.340877] ufshcd 624000.ufshc: ufshcd_ioctl: User buffer is NULL!
1886[ 8.340950] ufshcd 624000.ufshc: ufshcd_ioctl: User buffer is NULL!
1887[ 8.341635] ufshcd 624000.ufshc: ufshcd_ioctl: User buffer is NULL!
1888[ 8.341773] ufshcd 624000.ufshc: ufshcd_ioctl: User buffer is NULL!
1889[ 8.443686] EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: barrier=1
1890[ 8.457551] EXT4-fs (sde19): mounted filesystem with ordered data mode. Opts: barrier=1,discard
1891[ 8.513467] SMBCHG: smbchg_calc_max_flash_current: avail_iflash=2085777, ocv=3975501, ibat=840636, rbatt=208215
1892[ 8.702477] SMBCHG: smbchg_calc_max_flash_current: avail_iflash=1947951, ocv=3975501, ibat=1062936, rbatt=208215
1893[ 8.719772] qpnp_led.red: b:00 on:50 off:0
1894[ 8.719853] qpnp_led.green: b:00 on:50 off:0
1895[ 8.719917] qpnp_led.blue: b:00 on:50 off:0
1896[ 8.719999] qpnp_led.red: b:00 on:50 off:0
1897[ 8.720100] qpnp_led.green: b:00 on:50 off:0
1898[ 8.720163] qpnp_led.blue: b:00 on:50 off:0
1899[ 8.720244] qpnp_led.red: b:00 on:50 off:0
1900[ 8.720307] qpnp_led.green: b:00 on:50 off:0
1901[ 8.720368] qpnp_led.blue: b:00 on:50 off:0
1902[ 8.742713] qpnp_led.red: b:bf on:50 off:0
1903[ 8.742876] qpnp_led.green: b:bf on:50 off:0
1904[ 8.743018] qpnp_led.blue: b:bf on:50 off:0
1905[ 8.743331] qpnp_led.red: b:bf on:50 off:0
1906[ 8.743634] qpnp_led.green: b:bf on:50 off:0
1907[ 8.743843] qpnp_led.blue: b:bf on:50 off:0
1908[ 8.744215] qpnp_led.red: b:bf on:50 off:0
1909[ 8.744427] qpnp_led.green: b:bf on:50 off:0
1910[ 8.744631] qpnp_led.blue: b:bf on:50 off:0
1911[ 8.937396] msm-dwc3 6a00000.ssusb: Avail curr from USB = 2
1912[ 8.937470] android_work: android_work: sent uevent USB_STATE=SUSPENDED
1913[ 8.937524] SMBCHG: smbchg_config_chg_battery_type: No batterydata available
1914[ 8.937558] SMBCHG: smbchg_external_power_changed: usb type = SDP current_limit = 2
1915[ 8.937565] SMBCHG: smbchg_set_usb_current_max: USB current_ma = 2
1916[ 8.937570] SMBCHG: usb_suspend_vote_cb: vote usb suspend: 1, client: 2
1917[ 8.937589] SMBCHG: smbchg_masked_write_raw: addr = 0x1340 writing 0x12
1918[ 8.937607] SMBCHG: smbchg_set_usb_current_max: usb type = 4 current set to 0 mA
1919[ 8.937668] SMBCHG: smbchg_stay_awake: staying awake: 0x01 (bit 1)
1920[ 8.937675] SMBCHG: smbchg_vfloat_adjust_check: Starting vfloat adjustments
1921[ 8.937679] SMBCHG: power_ok_handler: triggered: 0x00
1922[ 8.938221] SMBCHG: smbchg_vfloat_adjust_work: Stopping vfloat adj taper=0 parallel_ma = 0
1923[ 8.938453] SMBCHG: smbchg_calc_max_flash_current: avail_iflash=1920386, ocv=3975501, ibat=1107396, rbatt=208215
1924[ 8.941562] SMBCHG: smbchg_calc_max_flash_current: avail_iflash=1699864, ocv=3975501, ibat=1463076, rbatt=208215
1925[ 8.941829] SMBCHG: fastchg_handler: p2f triggered
1926[ 8.941881] SMBCHG: smbchg_vfloat_adjust_check: Starting vfloat adjustments
1927[ 8.942294] SMBCHG: smbchg_calc_max_flash_current: avail_iflash=1782560, ocv=3975501, ibat=1329696, rbatt=208215
1928[ 8.942421] SMBCHG: smbchg_vfloat_adjust_work: Stopping vfloat adj taper=0 parallel_ma = 0
1929[ 8.947241] SMBCHG: smbchg_calc_max_flash_current: avail_iflash=1644734, ocv=3975501, ibat=1551996, rbatt=208215
1930[ 8.951050] SMBCHG: smbchg_calc_max_flash_current: avail_iflash=1699864, ocv=3975501, ibat=1463076, rbatt=208215
1931[ 8.958661] droid-hal-init: init first stage started!
1932[ 8.959667] droid-hal-init: init second stage started!
1933[ 8.963538] droid-hal-init: Running restorecon...
1934[ 8.963621] droid-hal-init: waitpid failed: No child processes
1935[ 8.964632] droid-hal-init: (Loading properties from /default.prop took 0.00s.)
1936[ 8.967645] droid-hal-init: property 'ro.product.cpu.abi' doesn't exist while expanding '/init.extraenv.${ro.product.cpu.abi}.rc'
1937[ 8.967672] droid-hal-init: /init.rc: 11: error while expanding import
1938[ 8.968945] droid-hal-init: (Parsing /init.environ.rc took 0.00s.)
1939[ 8.970845] droid-hal-init: ignored duplicate definition of service 'config_bt_addr'droid-hal-init: (Parsing init.qcom.power.rc took 0.00s.)
1940[ 8.976621] droid-hal-init: (Parsing init.qcom.usb.rc took 0.00s.)
1941[ 8.977945] dwc3 6a00000.dwc3: request ffffffc0335b3300 was not queued to ep0out
1942[ 8.979303] droid-hal-init: ignored duplicate definition of service 'ptt_ffbm'droid-hal-init: ignored duplicate definition of service 'ds_fmc_appd'droid-hal-init: ignored duplicate definition of service 'vm_bms'droid-hal-init: (Parsing init.device.rc took 0.00s.)
1943[ 8.979468] droid-hal-init: (Parsing /init.qcom.rc took 0.01s.)
1944[ 8.980226] [RMNET:HI] rmnet_config_notify_cb(): Kernel is trying to unregister rndis0
1945[ 8.980538] droid-hal-init: (Parsing /init.usb.configfs.rc took 0.00s.)
1946[ 8.980907] droid-hal-init: (Parsing /init.zygote64_32.rc took 0.00s.)
1947[ 8.981615] droid-hal-init: (Parsing /init.cm.rc took 0.00s.)
1948[ 8.981636] droid-hal-init: (Parsing /init.rc took 0.02s.)
1949[ 8.982021] droid-hal-init: Waiting for /dev/.coldboot_done...
1950[ 8.982048] droid-hal-init: Waiting for /dev/.coldboot_done took 0.00s.
1951[ 8.982075] droid-hal-init: /dev/hw_random not found
1952[ 8.982122] keychord: using input dev qpnp_pon for fevent
1953[ 8.982129] keychord: using input dev HDMI CEC User or Deck Control for fevent
1954[ 8.982135] keychord: using input dev qbt1000_key_input for fevent
1955[ 8.982140] keychord: using input dev atmel_mxt_T100_touchscreen for fevent
1956[ 8.982148] keychord: using input dev gpio-keys for fevent
1957[ 8.990088] [RMNET:HI] rmnet_config_notify_cb(): Kernel is trying to unregister rndis0
1958[ 8.990333] rndis_function_bind_config: rndis_function_bind_config MAC: 0A:81:AA:F3:D5:97
1959[ 8.990359] android_usb gadget: using random self ethernet address
1960[ 8.990365] android_usb gadget: using previous host ethernet address
1961[ 8.990671] rndis0: MAC 9a:8f:31:fd:de:34
1962[ 8.990676] rndis0: HOST MAC 0a:81:aa:f3:d5:97
1963[ 9.031073] IPv6: ADDRCONF(NETDEV_UP): rndis0: link is not ready
1964[ 9.137745] msm-dwc3 6a00000.ssusb: Avail curr from USB = 0
1965[ 9.138265] SMBCHG: smbchg_config_chg_battery_type: No batterydata available
1966[ 9.138299] SMBCHG: smbchg_external_power_changed: usb type = SDP current_limit = 0
1967[ 9.138306] SMBCHG: smbchg_set_usb_current_max: USB current_ma = 0
1968[ 9.138311] SMBCHG: smbchg_set_usb_current_max: usb type = 4 current set to 0 mA
1969[ 9.138330] SMBCHG: smbchg_vfloat_adjust_check: Starting vfloat adjustments
1970[ 9.138539] android_work: android_work: sent uevent USB_STATE=DISCONNECTED
1971[ 9.138566] SMBCHG: smbchg_vfloat_adjust_work: Stopping vfloat adj taper=0 parallel_ma = 0
1972[ 9.138763] SMBCHG: smbchg_calc_max_flash_current: avail_iflash=1975516, ocv=3975501, ibat=1018476, rbatt=208215
1973[ 9.142055] SMBCHG: smbchg_calc_max_flash_current: avail_iflash=1947951, ocv=3975501, ibat=1062936, rbatt=208215
1974[ 9.185860] android_work: android_work: sent uevent USB_STATE=CONNECTED
1975[ 9.331532] dwc3_gadget_suspend_interrupt(): state:6. Ignore SUSPEND.
1976[ 9.433570] android_work: android_work: sent uevent USB_STATE=DISCONNECTED
1977[ 9.440071] SMBCHG: smbchg_parallel_usb_en_work: AICL at 1700
1978[ 9.440108] SMBCHG: smbchg_is_parallel_usb_ok: Not in fast charge, skipping
1979[ 9.440114] SMBCHG: smbchg_relax: relaxing: 0x00 (bit 1)
1980[ 9.481516] android_work: android_work: sent uevent USB_STATE=CONNECTED
1981[ 9.520929] android_usb gadget: high-speed config #1: 66bf0c8.android_usb
1982[ 9.521023] msm-dwc3 6a00000.ssusb: Avail curr from USB = 500
1983[ 9.521631] IPv6: ADDRCONF(NETDEV_CHANGE): rndis0: link becomes ready
1984[ 9.521750] SMBCHG: smbchg_config_chg_battery_type: No batterydata available
1985[ 9.521783] SMBCHG: smbchg_external_power_changed: usb type = SDP current_limit = 500
1986[ 9.521790] SMBCHG: smbchg_set_usb_current_max: USB current_ma = 500
1987[ 9.521795] SMBCHG: usb_suspend_vote_cb: vote usb suspend: 0, client: 2
1988[ 9.521813] SMBCHG: smbchg_masked_write_raw: addr = 0x1340 writing 0x2
1989[ 9.521842] SMBCHG: smbchg_masked_write_raw: addr = 0x13d0 writing 0xa5
1990[ 9.521869] SMBCHG: smbchg_masked_write_raw: addr = 0x13f4 writing 0x19
1991[ 9.521940] SMBCHG: smbchg_masked_write_raw: addr = 0x1340 writing 0x2
1992[ 9.521954] SMBCHG: power_ok_handler: triggered: 0x01
1993[ 9.521964] SMBCHG: smbchg_set_usb_current_max: usb type = 4 current set to 500 mA
1994[ 9.522051] SMBCHG: smbchg_stay_awake: staying awake: 0x01 (bit 1)
1995[ 9.522059] SMBCHG: smbchg_vfloat_adjust_check: Starting vfloat adjustments
1996[ 9.522349] SMBCHG: smbchg_vfloat_adjust_work: Stopping vfloat adj taper=0 parallel_ma = 0
1997[ 9.522549] SMBCHG: smbchg_calc_max_flash_current: avail_iflash=2196038, ocv=3975501, ibat=662796, rbatt=208215
1998[ 9.525397] SMBCHG: smbchg_calc_max_flash_current: avail_iflash=2168472, ocv=3975501, ibat=707256, rbatt=208215
1999[ 9.573407] android_work: android_work: sent uevent USB_STATE=CONFIGURED
2000[ 9.622646] SMBCHG: fastchg_handler: p2f triggered
2001[ 9.622685] SMBCHG: smbchg_vfloat_adjust_check: Starting vfloat adjustments
2002[ 9.622961] SMBCHG: smbchg_calc_max_flash_current: avail_iflash=2664646, ocv=3975501, ibat=-93024, rbatt=208215
2003[ 9.623073] SMBCHG: smbchg_vfloat_adjust_work: Stopping vfloat adj taper=0 parallel_ma = 0
2004[ 9.628818] SMBCHG: smbchg_calc_max_flash_current: avail_iflash=2478031, ocv=3975501, ibat=173736, rbatt=209924
2005[ 9.943399] SMBCHG: smbchg_parallel_usb_en_work: AICL at 1700
2006[ 9.943436] SMBCHG: smbchg_is_parallel_usb_ok: SDP adapter, skipping
2007[ 9.943443] SMBCHG: smbchg_relax: relaxing: 0x00 (bit 1)
2008[ 10.446744] SMBCHG: smbchg_parallel_usb_en_work: AICL at 1700
2009[ 10.446781] SMBCHG: smbchg_is_parallel_usb_ok: SDP adapter, skipping
2010[ 13.186143] msm-dwc3 6a00000.ssusb: Avail curr from USB = 2
2011[ 13.186622] SMBCHG: smbchg_config_chg_battery_type: No batterydata available
2012[ 13.186657] SMBCHG: smbchg_external_power_changed: usb type = SDP current_limit = 2
2013[ 13.186664] SMBCHG: smbchg_set_usb_current_max: USB current_ma = 2
2014[ 13.186669] SMBCHG: usb_suspend_vote_cb: vote usb suspend: 1, client: 2
2015[ 13.186687] SMBCHG: smbchg_masked_write_raw: addr = 0x1340 writing 0x12
2016[ 13.186816] SMBCHG: power_ok_handler: triggered: 0x00
2017[ 13.187104] SMBCHG: smbchg_set_usb_current_max: usb type = 4 current set to 0 mA
2018[ 13.187130] SMBCHG: smbchg_stay_awake: staying awake: 0x01 (bit 1)
2019[ 13.187139] SMBCHG: smbchg_vfloat_adjust_check: Starting vfloat adjustments
2020[ 13.187344] SMBCHG: smbchg_vfloat_adjust_work: Stopping vfloat adj taper=0 parallel_ma = 0
2021[ 13.187545] SMBCHG: smbchg_calc_max_flash_current: avail_iflash=2395335, ocv=3975501, ibat=307116, rbatt=209924
2022[ 13.189700] SMBCHG: smbchg_calc_max_flash_current: avail_iflash=2174814, ocv=3975501, ibat=662796, rbatt=209924
2023[ 13.191119] SMBCHG: fastchg_handler: p2f triggered
2024[ 13.191161] SMBCHG: smbchg_vfloat_adjust_check: Starting vfloat adjustments
2025[ 13.191429] SMBCHG: smbchg_calc_max_flash_current: avail_iflash=2174814, ocv=3975501, ibat=662796, rbatt=209924
2026[ 13.191533] SMBCHG: smbchg_vfloat_adjust_work: Stopping vfloat adj taper=0 parallel_ma = 0
2027[ 13.195839] SMBCHG: smbchg_calc_max_flash_current: avail_iflash=2119683, ocv=3975501, ibat=751716, rbatt=209924
2028[ 13.327209] msm-dwc3 6a00000.ssusb: Avail curr from USB = 0
2029[ 13.327821] SMBCHG: smbchg_config_chg_battery_type: No batterydata available
2030[ 13.327858] SMBCHG: smbchg_external_power_changed: usb type = SDP current_limit = 0
2031[ 13.327864] SMBCHG: smbchg_set_usb_current_max: USB current_ma = 0
2032[ 13.327870] SMBCHG: smbchg_set_usb_current_max: usb type = 4 current set to 0 mA
2033[ 13.327889] SMBCHG: smbchg_vfloat_adjust_check: Starting vfloat adjustments
2034[ 13.328160] android_work: android_work: sent uevent USB_STATE=DISCONNECTED
2035[ 13.328229] SMBCHG: smbchg_vfloat_adjust_work: Stopping vfloat adj taper=0 parallel_ma = 0
2036[ 13.328430] SMBCHG: smbchg_calc_max_flash_current: avail_iflash=2147249, ocv=3975501, ibat=707256, rbatt=209924
2037[ 13.331561] SMBCHG: smbchg_calc_max_flash_current: avail_iflash=2174814, ocv=3975501, ibat=662796, rbatt=209924
2038[ 13.373429] android_work: android_work: sent uevent USB_STATE=CONNECTED
2039[ 13.533704] android_work: android_work: sent uevent USB_STATE=DISCONNECTED
2040[ 13.577521] android_work: android_work: sent uevent USB_STATE=CONNECTED
2041[ 13.690072] SMBCHG: smbchg_parallel_usb_en_work: AICL at 1700
2042[ 13.690109] SMBCHG: smbchg_is_parallel_usb_ok: Not in fast charge, skipping
2043[ 13.690121] SMBCHG: smbchg_relax: relaxing: 0x00 (bit 1)
2044[ 13.735009] android_work: android_work: sent uevent USB_STATE=DISCONNECTED
2045[ 13.777292] android_work: android_work: sent uevent USB_STATE=CONNECTED
2046[ 14.038008] android_usb gadget: high-speed config #1: 66bf0c8.android_usb
2047[ 14.038100] msm-dwc3 6a00000.ssusb: Avail curr from USB = 500
2048[ 14.038786] SMBCHG: smbchg_config_chg_battery_type: No batterydata available
2049[ 14.038823] SMBCHG: smbchg_external_power_changed: usb type = SDP current_limit = 500
2050[ 14.038830] SMBCHG: smbchg_set_usb_current_max: USB current_ma = 500
2051[ 14.038836] SMBCHG: usb_suspend_vote_cb: vote usb suspend: 0, client: 2
2052[ 14.038854] SMBCHG: smbchg_masked_write_raw: addr = 0x1340 writing 0x2
2053[ 14.038885] SMBCHG: smbchg_masked_write_raw: addr = 0x13d0 writing 0xa5
2054[ 14.038912] SMBCHG: smbchg_masked_write_raw: addr = 0x13f4 writing 0x19
2055[ 14.038985] SMBCHG: smbchg_masked_write_raw: addr = 0x1340 writing 0x2
2056[ 14.038998] SMBCHG: power_ok_handler: triggered: 0x01
2057[ 14.039008] SMBCHG: smbchg_set_usb_current_max: usb type = 4 current set to 500 mA
2058[ 14.039026] SMBCHG: smbchg_stay_awake: staying awake: 0x01 (bit 1)
2059[ 14.039034] SMBCHG: smbchg_vfloat_adjust_check: Starting vfloat adjustments
2060[ 14.039239] SMBCHG: smbchg_vfloat_adjust_work: Stopping vfloat adj taper=0 parallel_ma = 0
2061[ 14.039437] SMBCHG: smbchg_calc_max_flash_current: avail_iflash=2119683, ocv=3975501, ibat=751716, rbatt=209924
2062[ 14.042275] SMBCHG: smbchg_calc_max_flash_current: avail_iflash=2147249, ocv=3975501, ibat=707256, rbatt=209924
2063[ 14.090085] android_work: android_work: sent uevent USB_STATE=CONFIGURED
2064[ 14.138674] ------------[ cut here ]------------
2065[ 14.138696] WARNING: CPU: 0 PID: 0 at ../../../../../../kernel/leeco/msm8996/drivers/usb/dwc3/ep0.c:313 dwc3_ep0_out_start+0x50/0x88()
2066[ 14.138705] CPU: 0 PID: 0 Comm: swapper/0 Tainted: G B W 3.18.31-lineage-g306200f-dirty #2
2067[ 14.138710] Hardware name: Letv Technologies, Inc. MSM 8996 v3 + PMI8996 LE_X2-PVT (DT)
2068[ 14.138715] Call trace:
2069[ 14.138724] [<ffffffc000088854>] dump_backtrace+0x0/0x23c
2070[ 14.138731] [<ffffffc000088aa4>] show_stack+0x14/0x1c
2071[ 14.138739] [<ffffffc000e60a14>] dump_stack+0x88/0xac
2072[ 14.138747] [<ffffffc0000a0bcc>] warn_slowpath_common+0x88/0xb0
2073[ 14.138753] [<ffffffc0000a0ce8>] warn_slowpath_null+0x18/0x20
2074[ 14.138760] [<ffffffc000667e9c>] dwc3_ep0_out_start+0x50/0x88
2075[ 14.138766] [<ffffffc000667f48>] dwc3_ep0_stall_and_restart+0x74/0x84
2076[ 14.138771] [<ffffffc000668a8c>] dwc3_ep0_interrupt+0xa8c/0xc34
2077[ 14.138777] [<ffffffc000665c98>] dwc3_interrupt_bh+0x19c/0xf40
2078[ 14.138783] [<ffffffc0000a4b90>] tasklet_action+0x84/0xe8
2079[ 14.138788] [<ffffffc0000a4284>] __do_softirq+0x19c/0x390
2080[ 14.138793] [<ffffffc0000a4714>] irq_exit+0x84/0xc8
2081[ 14.138800] [<ffffffc0000f20bc>] __handle_domain_irq+0x8c/0xac
2082[ 14.138804] [<ffffffc000082544>] gic_handle_irq+0x68/0xd0
2083[ 14.138809] Exception stack(0xffffffc001607ce0 to 0xffffffc001607e00)
2084[ 14.138815] 7ce0: 00000000 00000000 0000afcc 00000000 01607e30 ffffffc0 00870604 ffffffc0
2085[ 14.138821] 7d00: 60000145 00000000 000c20b0 ffffffc0 02aeb760 00000000 ffffffff 00ffffff
2086[ 14.138827] 7d20: 341555ac 00000000 00000018 00000000 68a1d30d 0013de45 135b50f0 00000000
2087[ 14.138832] 7d40: 00000dbe 00000000 00000000 00000000 01607ef0 ffffffc0 00000000 00000000
2088[ 14.138837] 7d60: 000253e3 00000000 00000000 00000000 00000000 00000000 ffcddedc 00000000
2089[ 14.138842] 7d80: aaac15a5 00000000 00000000 00000000 001d1954 ffffffc0 00000000 00000000
2090[ 14.138847] 7da0: 00000000 00000000 00000000 00000000 0000afcc 00000000 000003e8 00000000
2091[ 14.138852] 7dc0: f644e018 ffffffc0 f644e018 ffffffc0 00000001 00000000 00000280 00000000
2092[ 14.138857] 7de0: fe2d1268 ffffffc0 00000000 00000000 4ab9d684 00000003 01607e30 ffffffc0
2093[ 14.138863] [<ffffffc000084da8>] el1_irq+0x68/0xd4
2094[ 14.138872] [<ffffffc00086ba40>] cpuidle_enter_state+0xe8/0x248
2095[ 14.138877] [<ffffffc00086bc18>] cpuidle_enter+0x18/0x20
2096[ 14.138883] [<ffffffc0000e0954>] cpu_startup_entry+0x278/0x398
2097[ 14.138888] [<ffffffc000e5b820>] rest_init+0x84/0x8c
2098[ 14.138896] [<ffffffc00156c978>] start_kernel+0x3c4/0x3d8
2099[ 14.138900] ---[ end trace 512cdd210c7f88f0 ]---
2100[ 14.139703] SMBCHG: fastchg_handler: p2f triggered
2101[ 14.139741] SMBCHG: smbchg_vfloat_adjust_check: Starting vfloat adjustments
2102[ 14.140039] SMBCHG: smbchg_calc_max_flash_current: avail_iflash=2478031, ocv=3975501, ibat=173736, rbatt=209924
2103[ 14.140149] SMBCHG: smbchg_vfloat_adjust_work: Stopping vfloat adj taper=0 parallel_ma = 0
2104[ 14.143278] SMBCHG: smbchg_calc_max_flash_current: avail_iflash=2478031, ocv=3975501, ibat=173736, rbatt=209924
2105[ 14.193416] SMBCHG: smbchg_parallel_usb_en_work: AICL at 1700
2106[ 14.193453] SMBCHG: smbchg_is_parallel_usb_ok: SDP adapter, skipping
2107[ 14.193460] SMBCHG: smbchg_relax: relaxing: 0x00 (bit 1)
2108[ 14.696745] SMBCHG: smbchg_parallel_usb_en_work: AICL at 1700
2109[ 14.696782] SMBCHG: smbchg_is_parallel_usb_ok: SDP adapter, skipping
2110[ 24.072771] capability: warning: `ofonod' uses 32-bit capabilities (legacy support in use)
2111[ 24.161063] SMBCHG: smbchg_calc_max_flash_current: avail_iflash=2009423, ocv=3975501, ibat=929556, rbatt=209924
2112[ 25.152936] droid-hal-init: init first stage started!
2113[ 25.153951] droid-hal-init: init second stage started!
2114[ 25.154518] droid-hal-init: Failed to initialize property area
2115[ 27.488171] droid-hal-init: init first stage started!
2116[ 27.488969] droid-hal-init: init second stage started!
2117[ 27.489563] droid-hal-init: Failed to initialize property area
2118[ 34.177297] SMBCHG: smbchg_calc_max_flash_current: avail_iflash=2533161, ocv=3975501, ibat=84816, rbatt=209924
2119[ 43.680221] random: nonblocking pool is initialized
2120[ 44.196333] SMBCHG: smbchg_calc_max_flash_current: avail_iflash=2587050, ocv=3987250, ibat=84816, rbatt=208398
2121[ 51.025008] qpnp_led.red: b:34 on:50 off:0
2122[ 51.025233] qpnp_led.green: b:34 on:50 off:0
2123[ 51.025438] qpnp_led.blue: b:34 on:50 off:0
2124[ 51.025790] qpnp_led.red: b:34 on:50 off:0
2125[ 51.025994] qpnp_led.green: b:34 on:50 off:0
2126[ 51.026196] qpnp_led.blue: b:34 on:50 off:0
2127[ 51.026545] qpnp_led.red: b:34 on:50 off:0
2128[ 51.026797] qpnp_led.green: b:34 on:50 off:0
2129[ 51.026999] qpnp_led.blue: b:34 on:50 off:0
2130[ 54.215668] SMBCHG: smbchg_calc_max_flash_current: avail_iflash=2449224, ocv=3987250, ibat=307116, rbatt=208398
2131[ 54.226895] [RMNET:HI] rmnet_config_notify_cb(): Kernel is trying to unregister sit0
2132[ 54.230379] [RMNET:HI] rmnet_config_notify_cb(): Kernel is trying to unregister sit0
2133[ 54.232284] [RMNET:HI] rmnet_config_notify_cb(): Kernel is trying to unregister lo
2134[ 54.233462] [RMNET:HI] rmnet_config_notify_cb(): Kernel is trying to unregister lo
2135[ 64.235569] SMBCHG: smbchg_calc_max_flash_current: avail_iflash=2587050, ocv=3987250, ibat=84816, rbatt=208398
2136[ 74.254770] SMBCHG: smbchg_calc_max_flash_current: avail_iflash=2559485, ocv=3987250, ibat=129276, rbatt=208398
2137[ 84.267308] SMBCHG: smbchg_calc_max_flash_current: avail_iflash=2559485, ocv=3987250, ibat=129276, rbatt=208398
2138[ 94.286236] SMBCHG: smbchg_calc_max_flash_current: avail_iflash=2559485, ocv=3987250, ibat=129276, rbatt=208398
2139[ 104.305380] SMBCHG: smbchg_calc_max_flash_current: avail_iflash=2632258, ocv=3985267, ibat=84816, rbatt=204431
2140[ 114.324540] SMBCHG: smbchg_calc_max_flash_current: avail_iflash=2632258, ocv=3985267, ibat=84816, rbatt=204431
2141[ 124.343558] SMBCHG: smbchg_calc_max_flash_current: avail_iflash=2632258, ocv=3985267, ibat=84816, rbatt=204431
2142[ 134.362569] SMBCHG: smbchg_calc_max_flash_current: avail_iflash=2595433, ocv=3973518, ibat=129276, rbatt=202416
2143[ 144.381720] SMBCHG: smbchg_calc_max_flash_current: avail_iflash=2595433, ocv=3973518, ibat=129276, rbatt=202416
2144[ 154.400836] SMBCHG: smbchg_calc_max_flash_current: avail_iflash=2622998, ocv=3973518, ibat=84816, rbatt=202416
2145[ 164.419835] SMBCHG: smbchg_calc_max_flash_current: avail_iflash=2648690, ocv=3985267, ibat=129276, rbatt=201135
2146[ 174.438790] SMBCHG: smbchg_calc_max_flash_current: avail_iflash=2676255, ocv=3985267, ibat=84816, rbatt=201135
2147[ 184.457973] SMBCHG: smbchg_calc_max_flash_current: avail_iflash=2676255, ocv=3985267, ibat=84816, rbatt=201135
2148[ 194.470584] SMBCHG: smbchg_calc_max_flash_current: avail_iflash=2679569, ocv=3985267, ibat=84816, rbatt=200891
2149[ 204.480629] SMBCHG: smbchg_calc_max_flash_current: avail_iflash=2679569, ocv=3985267, ibat=84816, rbatt=200891
2150[ 214.499531] SMBCHG: smbchg_calc_max_flash_current: avail_iflash=2652004, ocv=3985267, ibat=129276, rbatt=200891
2151[ 224.518517] SMBCHG: smbchg_calc_max_flash_current: avail_iflash=2679569, ocv=3985267, ibat=84816, rbatt=200891
2152sh-3.2#