· 7 years ago · Mar 04, 2019, 06:34 AM
1C:\adb>fastboot flash recovery recovery-test5.img
2< waiting for device >
3target reported max download size of 536870912 bytes
4sending 'recovery' (56932 KB)...
5OKAY [ 1.240s]
6writing 'recovery'...
7OKAY [ 0.286s]
8finished. total time: 1.536s
9
10C:\adb>fastboot reboot
11rebooting...
12
13finished. total time: 0.003s
14
15C:\adb>adb shell dmesg
16[ 0.000000] Booting Linux on physical CPU 0x0
17[ 0.000000] Linux version 4.14.83-perf-gbb83a2b (builder@c4-miui-ota-bd63.bj) (clang version 6.0.9 for Android NDK) #1 SMP PREEMPT Sun Feb 3 18:19:28 CST 2019
18[ 0.000000] Boot CPU: AArch64 Processor [51df805e]
19[ 0.000000] Powerup reason=0x40041
20[ 0.000000] Machine: Qualcomm Technologies, Inc. SM8150 V2 PM8150 CEPHEUS
21[ 0.000000] ramoops: msm_reserve_ramoops_memory addr=b0000000,size=400000
22[ 0.000000] ramoops: msm_reserve_ramoops_memory record_size=0,ftrace_size=0
23[ 0.000000] Memory limit set/overridden to 5068MB
24[ 0.000000] Reserved memory: created CMA memory pool at 0x00000000f5c00000, size 160 MiB
25[ 0.000000] OF: reserved mem: initialized node secure_display_region, compatible id shared-dma-pool
26[ 0.000000] Reserved memory: created CMA memory pool at 0x00000000f3400000, size 40 MiB
27[ 0.000000] OF: reserved mem: initialized node linux,cma, compatible id shared-dma-pool
28[ 0.000000] Reserved memory: created CMA memory pool at 0x00000000f2400000, size 16 MiB
29[ 0.000000] OF: reserved mem: initialized node qseecom_ta_region, compatible id shared-dma-pool
30[ 0.000000] Reserved memory: created CMA memory pool at 0x00000001bdc00000, size 36 MiB
31[ 0.000000] OF: reserved mem: initialized node mem_dump_region, compatible id shared-dma-pool
32[ 0.000000] Reserved memory: created CMA memory pool at 0x00000000f1c00000, size 8 MiB
33[ 0.000000] OF: reserved mem: initialized node sp_region, compatible id shared-dma-pool
34[ 0.000000] Reserved memory: created CMA memory pool at 0x00000000f0c00000, size 16 MiB
35[ 0.000000] OF: reserved mem: initialized node adsp_region, compatible id shared-dma-pool
36[ 0.000000] Reserved memory: created CMA memory pool at 0x00000000f0800000, size 4 MiB
37[ 0.000000] OF: reserved mem: initialized node cdsp_region, compatible id shared-dma-pool
38[ 0.000000] Removed memory: created DMA memory pool at 0x000000008b700000, size 5 MiB
39[ 0.000000] OF: reserved mem: initialized node camera_region@8b700000, compatible id removed-dma-pool
40[ 0.000000] Removed memory: created DMA memory pool at 0x000000008bc00000, size 1 MiB
41[ 0.000000] OF: reserved mem: initialized node pil_wlan_fw_region@8bc00000, compatible id removed-dma-pool
42[ 0.000000] Removed memory: created DMA memory pool at 0x000000008bd80000, size 0 MiB
43[ 0.000000] OF: reserved mem: initialized node pil_npu_region@8bd80000, compatible id removed-dma-pool
44[ 0.000000] Removed memory: created DMA memory pool at 0x000000008be00000, size 34 MiB
45[ 0.000000] OF: reserved mem: initialized node pil_adsp_region@8be00000, compatible id removed-dma-pool
46[ 0.000000] Removed memory: created DMA memory pool at 0x000000008e000000, size 150 MiB
47[ 0.000000] OF: reserved mem: initialized node modem_region@8e000000, compatible id removed-dma-pool
48[ 0.000000] Removed memory: created DMA memory pool at 0x0000000097600000, size 5 MiB
49[ 0.000000] OF: reserved mem: initialized node pil_video_region@97600000, compatible id removed-dma-pool
50[ 0.000000] Removed memory: created DMA memory pool at 0x0000000097b00000, size 20 MiB
51[ 0.000000] OF: reserved mem: initialized node pil_slpi_region@97b00000, compatible id removed-dma-pool
52[ 0.000000] Removed memory: created DMA memory pool at 0x0000000098f00000, size 0 MiB
53[ 0.000000] OF: reserved mem: initialized node pil_ipa_fw_region@98f00000, compatible id removed-dma-pool
54[ 0.000000] Removed memory: created DMA memory pool at 0x0000000098f10000, size 0 MiB
55[ 0.000000] OF: reserved mem: initialized node pil_ipa_gsi_region@98f10000, compatible id removed-dma-pool
56[ 0.000000] Removed memory: created DMA memory pool at 0x0000000098f15000, size 0 MiB
57[ 0.000000] OF: reserved mem: initialized node pil_gpu_region@98f15000, compatible id removed-dma-pool
58[ 0.000000] Removed memory: created DMA memory pool at 0x0000000099000000, size 1 MiB
59[ 0.000000] OF: reserved mem: initialized node pil_spss_region@99000000, compatible id removed-dma-pool
60[ 0.000000] Removed memory: created DMA memory pool at 0x0000000099100000, size 20 MiB
61[ 0.000000] OF: reserved mem: initialized node cdsp_regions@99100000, compatible id removed-dma-pool
62[ 0.000000] Reserved memory: created DMA memory pool at 0x000000009e400000, size 20 MiB
63[ 0.000000] OF: reserved mem: initialized node qseecom_region@0x9e400000, compatible id shared-dma-pool
64[ 0.000000] Removed memory: created DMA memory pool at 0x00000000a4c00000, size 60 MiB
65[ 0.000000] OF: reserved mem: initialized node cdsp_sec_regions@0xa4c00000, compatible id removed-dma-pool
66[ 0.000000] Removed memory: created DMA memory pool at 0x00000000af000000, size 16 MiB
67[ 0.000000] OF: reserved mem: initialized node ramdump_fb_region@af000000, compatible id removed-dma-pool
68[ 0.000000] On node 0 totalpages: 1188009
69[ 0.000000] DMA zone: 6275 pages used for memmap
70[ 0.000000] DMA zone: 0 pages reserved
71[ 0.000000] DMA zone: 401577 pages, LIFO batch:31
72[ 0.000000] Normal zone: 12288 pages used for memmap
73[ 0.000000] Normal zone: 786432 pages, LIFO batch:31
74[ 0.000000] psci: probing for conduit method from DT.
75[ 0.000000] psci: PSCIv1.1 detected in firmware.
76[ 0.000000] psci: Using standard PSCI v0.2 function IDs
77[ 0.000000] psci: MIGRATE_INFO_TYPE not supported.
78[ 0.000000] psci: SMC Calling Convention v1.1
79[ 0.000000] random: fast init done
80[ 0.000000] random: get_random_bytes called from start_kernel+0x90/0x490 with crng_init=1
81[ 0.000000] percpu: Embedded 23 pages/cpu @ffffffcf7d799000 s53656 r8192 d32360 u94208
82[ 0.000000] pcpu-alloc: s53656 r8192 d32360 u94208 alloc=23*4096
83[ 0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 [0] 4 [0] 5 [0] 6 [0] 7
84[ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 1169446
85[ 0.000000] Kernel command line: ramoops_memreserve=4M rcupdate.rcu_expedited=1 rcu_nocbs=0-7 cgroup.memory=nokmem,nosocket console=ttyMSM0,115200n8 earlycon=msm_geni_serial,0xa90000 androidboot.hardware=qcom androidboot.console=ttyMSM0 androidboot.memcg=1 lpm_levels.sleep_disabled=1 video=vfb:640x400,bpp=32,memsize=3072000 msm_rtb.filter=0x237 service_locator.enable=1 swiotlb=2048 firmware_class.path=/vendor/firmware_mnt/image loop.max_part=7 androidboot.usbcontroller=a600000.dwc3 androidboot.selinux=permissive buildvariant=eng androidboot.verifiedbootstate=orange androidboot.keymaster=1 dm="1 vroot none ro 1,0 7224056 verity 1 PARTUUID=a950d40f-b318-0bdb-24c7-26c553619847 PARTUUID=a950d40f-b318-0bdb-24c7-26c553619847 4096 4096 903007 903007 sha1 8445c5d54bbf154db885293dc7cf5b95f5bcf9de f87460b2869326b8a007c7c63f3ace374aef5cf88cd017422a722f68c470ea2c 10 restart_on_corruption ignore_zero_blocks use_fec_from_device PARTUUID=a950d40f-b318-0bdb-24c7-26c553619847 fec_roots 2 fec_blocks 9101
86[ 0.000000] device-mapper: init: will configure 1 devices
87[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
88[ 0.000000] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
89[ 0.000000] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
90[ 0.000000] software IO TLB [mem 0xf0400000-0xf0800000] (4MB) mapped at [ffffffceb0400000-ffffffceb07fffff]
91[ 0.000000] Memory: 4261848K/4752036K available (19966K kernel code, 2432K rwdata, 7244K rodata, 6144K init, 5900K bss, 203468K reserved, 286720K cma-reserved)
92[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
93[ 0.000000]
94[ 0.000000] **********************************************************
95[ 0.000000] ** NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE **
96[ 0.000000] ** **
97[ 0.000000] ** trace_printk() being used. Allocating extra memory. **
98[ 0.000000] ** **
99[ 0.000000] ** This means that this is a DEBUG kernel and it is **
100[ 0.000000] ** unsafe for production use. **
101[ 0.000000] ** **
102[ 0.000000] ** If you see this message and you are not debugging **
103[ 0.000000] ** the kernel, report this immediately to your vendor! **
104[ 0.000000] ** **
105[ 0.000000] ** NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE **
106[ 0.000000] **********************************************************
107[ 0.000000] Preemptible hierarchical RCU implementation.
108[ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
109[ 0.000000] All grace periods are expedited (rcu_expedited).
110[ 0.000000] Tasks RCU enabled.
111[ 0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0
112[ 0.000000] GICv3: no VLPI support, no direct LPI support
113[ 0.000000] GICv3: CPU0: found redistributor 0 region 0:0x0000000017a60000
114[ 0.000000] PDC SM8150 initialized
115[ 0.000000] Offload RCU callbacks from CPUs: 0-7.
116[ 0.000000] arch_timer: cp15 and mmio timer(s) running at 19.20MHz (virt/virt).
117[ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x46d987e47, max_idle_ns: 440795202767 ns
118[ 0.000004] sched_clock: 56 bits at 19MHz, resolution 52ns, wraps every 4398046511078ns
119[ 0.000017] clocksource: Switched to clocksource arch_sys_counter
120[ 0.002174] Calibrating delay loop (skipped), value calculated using timer frequency.. 38.40 BogoMIPS (lpj=192000)
121[ 0.002188] pid_max: default: 32768 minimum: 301
122[ 0.002315] Security Framework initialized
123[ 0.002328] SELinux: Initializing.
124[ 0.002391] SELinux: Starting in permissive mode
125[ 0.002438] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes)
126[ 0.002454] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes)
127[ 0.014167] ASID allocator initialised with 65536 entries
128[ 0.016263] Hierarchical SRCU implementation.
129[ 0.024696] MSM Memory Dump base table set up
130[ 0.024725] MSM Memory Dump apps data table set up
131[ 0.027295] smp: Bringing up secondary CPUs ...
132[ 0.037010] GICv3: CPU1: found redistributor 100 region 0:0x0000000017a80000
133[ 0.037057] CPU1: Booted secondary processor [51df805e]
134[ 0.046733] GICv3: CPU2: found redistributor 200 region 0:0x0000000017aa0000
135[ 0.046767] CPU2: Booted secondary processor [51df805e]
136[ 0.056475] GICv3: CPU3: found redistributor 300 region 0:0x0000000017ac0000
137[ 0.056503] CPU3: Booted secondary processor [51df805e]
138[ 0.066754] CPU features: Unsupported CPU feature variation detected.
139[ 0.066772] GICv3: CPU4: found redistributor 400 region 0:0x0000000017ae0000
140[ 0.066801] CPU4: Booted secondary processor [51df804e]
141[ 0.076763] GICv3: CPU5: found redistributor 500 region 0:0x0000000017b00000
142[ 0.076794] CPU5: Booted secondary processor [51df804e]
143[ 0.086880] GICv3: CPU6: found redistributor 600 region 0:0x0000000017b20000
144[ 0.086911] CPU6: Booted secondary processor [51df804e]
145[ 0.097467] GICv3: CPU7: found redistributor 700 region 0:0x0000000017b40000
146[ 0.097495] CPU7: Booted secondary processor [51df804e]
147[ 0.097625] smp: Brought up 1 node, 8 CPUs
148[ 0.097652] SMP: Total of 8 processors activated.
149[ 0.097658] CPU features: detected feature: GIC system register CPU interface
150[ 0.097661] CPU features: detected feature: Privileged Access Never
151[ 0.097666] CPU features: detected feature: User Access Override
152[ 0.097670] CPU features: detected feature: 32-bit EL0 Support
153[ 0.097675] CPU features: detected: Hardware dirty bit management
154[ 0.098140] CPU: All CPU(s) started at EL1
155[ 0.098180] alternatives: patching kernel code
156[ 0.100823] CPU7: update max cpu_capacity 1024
157[ 0.120062] CPU0: update max cpu_capacity 602
158[ 0.162071] Registered cp15_barrier emulation handler
159[ 0.162084] Registered setend emulation handler
160[ 0.162248] CPU4: update max cpu_capacity 1024
161[ 0.162340] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
162[ 0.162354] futex hash table entries: 2048 (order: 6, 262144 bytes)
163[ 0.165805] ramoops: msm_register_ramoops_device
164[ 0.165875] pinctrl core: initialized pinctrl subsystem
165[ 0.166287] NET: Registered protocol family 16
166[ 0.167390] schedtune: configured to support 5 boost groups
167[ 0.167617] pstore: using zlib compression
168[ 0.168054] console [pstore-1] enabled
169[ 0.168098] pstore: Registered ramoops as persistent store backend
170[ 0.168105] ramoops: attached 0x400000@0xb0000000, ecc: 0/0
171[ 0.168518] cpuidle: using governor menu
172[ 0.168536] cpuidle: using governor qcom
173[ 0.168623] NET: Registered protocol family 42
174[ 0.172135] vdso: 2 pages (1 code @ ffffff8b0bc07000, 1 data @ ffffff8b0ca04000)
175[ 0.172144] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers.
176[ 0.172763] DMA: preallocated 256 KiB pool for atomic allocations
177[ 0.173362] exit: IPA_USB init success!
178[ 0.181126] unable to find DT imem DLOAD mode node
179[ 0.181952] unable to find DT imem EDLOAD mode node
180[ 0.183752] spmi spmi-0: PMIC arbiter version v5 (0x50000000)
181[ 0.183859] platform 4080000.qcom,mss: assigned reserved memory node modem_region@8e000000
182[ 0.183961] platform 17300000.qcom,lpass: assigned reserved memory node pil_adsp_region@8be00000
183[ 0.184056] platform 5c00000.qcom,ssc: assigned reserved memory node pil_slpi_region@97b00000
184[ 0.184153] platform 188101c.qcom,spss: assigned reserved memory node pil_spss_region@99000000
185[ 0.184294] msm_watchdog 17c10000.qcom,wdt: wdog absent resource not present
186[ 0.185991] msm_watchdog 17c10000.qcom,wdt: MSM Watchdog Initialized
187[ 0.186043] platform 9800000.qcom,npu: assigned reserved memory node pil_npu_region@8bd80000
188[ 0.186150] platform 8300000.qcom,turing: assigned reserved memory node cdsp_regions@99100000
189[ 0.186215] platform aae0000.qcom,venus: assigned reserved memory node pil_video_region@97600000
190[ 0.186990] sps:sps is ready.
191[ 0.187522] platform soc:qcom,msm-adsprpc-mem: assigned reserved memory node adsp_region
192[ 0.193979] platform 87900000.qseecom: assigned reserved memory node qseecom_region@0x9e400000
193[ 0.194325] platform soc:mem_dump: assigned reserved memory node mem_dump_region
194[ 0.219821] msm-dcc 10a2000.dcc_v2: DCC list passed 3
195[ 0.221166] msm-dcc 10a2000.dcc_v2: All values written to enable
196[ 0.223336] platform soc:qcom,ipa_fws: assigned reserved memory node pil_ipa_fw_region@98f00000
197[ 0.223906] platform 88a7000.msm_tspp: assigned reserved memory node qseecom_region@0x9e400000
198[ 0.224117] sm8150-pinctrl 3000000.pinctrl: invalid resource
199[ 0.233854] pm8150l_s6_level: supplied by pm8150l_s4_level
200[ 0.233993] pm8150l_s6_level_ao: supplied by pm8150l_s4_level_ao
201[ 0.238295] rpmh_regulator_probe: smpf2: could not find RPMh address for resource
202[ 0.238418] rpmh_regulator_probe: ldof2: could not find RPMh address for resource
203[ 0.238532] rpmh_regulator_probe: ldof5: could not find RPMh address for resource
204[ 0.238644] rpmh_regulator_probe: ldof6: could not find RPMh address for resource
205[ 0.260487] vServices Framework 1.0
206[ 0.264432] gpu_cx_gdsc: supplied by pm8150l_s6_level
207[ 0.264722] gpu_gx_gdsc: supplied by pm8150l_s2_level
208[ 0.266142] clk: add_opp: Set OPP pair (300000000 Hz, 600000 uv) on cpu0
209[ 0.266565] clk: add_opp: Set OPP pair (1785600000 Hz, 808000 uv) on cpu0
210[ 0.266602] clk: add_opp: Set OPP pair (300000000 Hz, 600000 uv) on cpu1
211[ 0.267010] clk: add_opp: Set OPP pair (1785600000 Hz, 808000 uv) on cpu1
212[ 0.267046] clk: add_opp: Set OPP pair (300000000 Hz, 600000 uv) on cpu2
213[ 0.267459] clk: add_opp: Set OPP pair (1785600000 Hz, 808000 uv) on cpu2
214[ 0.267495] clk: add_opp: Set OPP pair (300000000 Hz, 600000 uv) on cpu3
215[ 0.267911] clk: add_opp: Set OPP pair (1785600000 Hz, 808000 uv) on cpu3
216[ 0.267949] clk: add_opp: Set OPP pair (710400000 Hz, 600000 uv) on cpu4
217[ 0.268334] clk: add_opp: Set OPP pair (2419200000 Hz, 984000 uv) on cpu4
218[ 0.268371] clk: add_opp: Set OPP pair (710400000 Hz, 600000 uv) on cpu5
219[ 0.268756] clk: add_opp: Set OPP pair (2419200000 Hz, 984000 uv) on cpu5
220[ 0.268792] clk: add_opp: Set OPP pair (710400000 Hz, 600000 uv) on cpu6
221[ 0.269172] clk: add_opp: Set OPP pair (2419200000 Hz, 984000 uv) on cpu6
222[ 0.269218] clk: add_opp: Set OPP pair (825600000 Hz, 604000 uv) on cpu7
223[ 0.269676] clk: add_opp: Set OPP pair (2841600000 Hz, 968000 uv) on cpu7
224[ 0.269870] clk: add_opp: Set OPP pair (300000000 Hz, 600000 uv) on soc:qcom,cpu0-cpu-l3-lat
225[ 0.269876] clk: add_opp: Set OPP pair (300000000 Hz, 600000 uv) on soc:qcom,cpu4-cpu-l3-lat
226[ 0.269880] clk: add_opp: Set OPP pair (300000000 Hz, 600000 uv) on soc:qcom,cdsp-cdsp-l3-lat
227[ 0.269885] clk: add_opp: Set OPP pair (300000000 Hz, 600000 uv) on soc:qcom,cpu7-cpu-l3-lat
228[ 0.271243] clk: add_opp: Set OPP pair (1612800000 Hz, 816000 uv) on soc:qcom,cpu0-cpu-l3-lat
229[ 0.271249] clk: add_opp: Set OPP pair (1612800000 Hz, 816000 uv) on soc:qcom,cpu4-cpu-l3-lat
230[ 0.271255] clk: add_opp: Set OPP pair (1612800000 Hz, 816000 uv) on soc:qcom,cdsp-cdsp-l3-lat
231[ 0.271260] clk: add_opp: Set OPP pair (1612800000 Hz, 816000 uv) on soc:qcom,cpu7-cpu-l3-lat
232[ 0.271816] sched-energy: Sched-energy-costs installed from DT
233[ 0.272093] cpufreq: driver osm-cpufreq up and running
234[ 0.272096] clk: clk_cpu_osm_driver_probe: OSM CPUFreq driver inited
235[ 0.272751] qmp-aop-clk soc:qcom,aopclk: Registered clocks with AOP
236[ 0.273349] clk-rpmh soc:qcom,rpmhclk: Registered RPMh clocks
237[ 0.277889] gcc-sm8150 100000.qcom,gcc: Registered GCC clocks
238[ 0.278188] gpu_cc_gmu_clk_src: set OPP pair(19200000 Hz: 49 uV) on 2c6a000.qcom,gmu
239[ 0.278216] gpu_cc_gmu_clk_src: set OPP pair(500000000 Hz: 129 uV) on 2c6a000.qcom,gmu
240[ 0.278250] gpu_cc-sm8150 2c90000.qcom,gpucc: Registered GPU CC clocks
241[ 0.278487] AXI: msm_bus_scale_register_client(): msm_bus_scale_register_client: Bus driver not ready.
242[ 0.278489] video_cc-sm8150 ab00000.qcom,videocc: Unable to register for bw voting
243[ 0.280092] CPU3: update max cpu_capacity 378
244[ 0.280738] KPI: Bootloader start count = 60937
245[ 0.280744] KPI: Bootloader end count = 97712
246[ 0.280747] KPI: Bootloader display count = 1070822351
247[ 0.280750] KPI: Bootloader load kernel count = 4260882923
248[ 0.280753] KPI: Kernel MPM timestamp = 113527
249[ 0.280755] KPI: Kernel MPM Clock frequency = 32768
250[ 0.280763] socinfo_print: v0.15, id=339, ver=2.1, raw_id=165, raw_ver=2, hw_plat=37, hw_plat_ver=1179648
251[ 0.280763] accessory_chip=0, hw_plat_subtype=0, pmic_model=65566, pmic_die_revision=196608 foundry_id=1 serial_number=3198614366 num_pmics=3 chip_family=0x56 raw_device_family=0x6 raw_device_number=0x3 nproduct_id=0x404 num_clusters=0x1 ncluster_array_offset=0xb0 num_defective_parts=0xc ndefective_parts_array_offset=0xb4 nmodem_supported=0xff
252[ 0.280837] Minidump: Enabled with max number of regions 200
253[ 0.280884] msm_bus_fabric_rpmh_init_driver
254[ 0.280951] msm_bus: Probe started
255[ 0.281219] msm_bus_device 16e0000.ad-hoc-bus: Bus type is missing
256[ 0.281240] msm_bus_device 16e0000.ad-hoc-bus: Bus type is missing
257[ 0.281245] msm_bus_device 16e0000.ad-hoc-bus: Bus type is missing
258[ 0.281260] msm_bus_device 16e0000.ad-hoc-bus: Bus type is missing
259[ 0.281877] msm_bus: DT Parsing complete
260[ 0.284319] msm_bus_fab_init_noc_ops: Invalid Bus type
261[ 0.284373] msm_bus_fab_init_noc_ops: Invalid Bus type
262[ 0.284386] msm_bus_fab_init_noc_ops: Invalid Bus type
263[ 0.284433] msm_bus_fab_init_noc_ops: Invalid Bus type
264[ 0.287850] CPU7: update max cpu_capacity 1024
265[ 0.298006] Built 1 zonelists, mobility grouping on. Total pages: 1264023
266[ 0.306269] mem-offline: Added memory blocks ranging from mem14 - mem15
267[ 0.306541] reg-fixed-voltage soc:ext_5v_boost: could not find pctldev for node /soc/qcom,spmi@c440000/qcom,pm8150b@2/pinctrl@c000/otg_vbus_boost/otg_vbus_boost_default, deferring probe
268[ 0.306588] camera_viodd_ldo: supplied by pm8150_s4
269[ 0.306732] actuator_rear_regulator: supplied by pm8150l_bob
270[ 0.306791] actuator_rear_aux_ldo: supplied by pm8150l_bob
271[ 0.306853] actuator_ultra_ldo: supplied by pm8150l_bob
272[ 0.311693] register_client_adhoc:find path.src 161 dest 627
273[ 0.311761] register_client_adhoc:Client handle 1 apps_smmu
274[ 0.311876] arm-smmu 15000000.apps-smmu: non-coherent table walk
275[ 0.311881] arm-smmu 15000000.apps-smmu: (IDR0.CTTW overridden by FW configuration)
276[ 0.311884] arm-smmu 15000000.apps-smmu: stream matching with 94 register groups
277[ 0.312726] register_client_adhoc:find path.src 161 dest 627
278[ 0.312775] register_client_adhoc:Client handle 2 apps_smmu
279[ 0.312846] register_client_adhoc:find path.src 161 dest 627
280[ 0.312888] register_client_adhoc:Client handle 3 apps_smmu
281[ 0.312947] register_client_adhoc:find path.src 22 dest 773
282[ 0.312972] register_client_adhoc:Client handle 4 mnoc_hf_1_tbu
283[ 0.313016] register_client_adhoc:find path.src 154 dest 10070
284[ 0.313036] register_client_adhoc:Client handle 5 apps_smmu
285[ 0.313090] register_client_adhoc:find path.src 22 dest 773
286[ 0.313111] register_client_adhoc:Client handle 6 mnoc_hf_0_tbu
287[ 0.313151] register_client_adhoc:find path.src 154 dest 10070
288[ 0.313165] register_client_adhoc:Client handle 7 apps_smmu
289[ 0.313215] register_client_adhoc:find path.src 161 dest 627
290[ 0.313259] register_client_adhoc:Client handle 8 apps_smmu
291[ 0.313328] register_client_adhoc:find path.src 161 dest 627
292[ 0.313367] register_client_adhoc:Client handle 9 apps_smmu
293[ 0.313419] register_client_adhoc:find path.src 137 dest 772
294[ 0.313446] register_client_adhoc:Client handle 10 mnoc_sf_0_tbu
295[ 0.314087] arm-smmu 2ca0000.kgsl-smmu: non-coherent table walk
296[ 0.314091] arm-smmu 2ca0000.kgsl-smmu: (IDR0.CTTW overridden by FW configuration)
297[ 0.314094] arm-smmu 2ca0000.kgsl-smmu: stream matching with 6 register groups
298[ 0.314702] vgaarb: loaded
299[ 0.314814] SCSI subsystem initialized
300[ 0.314857] usbcore: registered new interface driver usbfs
301[ 0.314867] usbcore: registered new interface driver hub
302[ 0.314937] usbcore: registered new device driver usb
303[ 0.315126] usb_phy_generic soc:usb_nop_phy: soc:usb_nop_phy supply vcc not found, using dummy regulator
304[ 0.315296] xiaomi_touch_probe enter
305[ 0.315299] xiaomi_touch_parse_dt touch,name:xiaomi-touch
306[ 0.315323] xiaomi_touch_probe over
307[ 0.315428] media: Linux media interface: v0.10
308[ 0.315436] Linux video capture interface: v2.00
309[ 0.317443] virt zone: sensor[gpuss-1-usr] read error:-22
310[ 0.317449] thermal thermal_zone32: failed to read out thermal zone (-22)
311[ 0.318587] EDAC MC: Ver: 3.0.0
312[ 0.319286] platform soc:qcom,ion:qcom,ion-heap@22: assigned reserved memory node adsp_region
313[ 0.319311] platform soc:qcom,ion:qcom,ion-heap@27: assigned reserved memory node qseecom_region@0x9e400000
314[ 0.319330] platform soc:qcom,ion:qcom,ion-heap@19: assigned reserved memory node qseecom_ta_region
315[ 0.319351] platform soc:qcom,ion:qcom,ion-heap@13: assigned reserved memory node sp_region
316[ 0.319371] platform soc:qcom,ion:qcom,ion-heap@10: assigned reserved memory node secure_display_region
317[ 0.319447] ION heap system created
318[ 0.319534] ION heap adsp created at 0x00000000f0c00000 with size 1000000
319[ 0.319540] ION heap qsecom created at 0x000000009e400000 with size 1400000
320[ 0.319546] ION heap qsecom_ta created at 0x00000000f2400000 with size 1000000
321[ 0.319553] ION heap spss created at 0x00000000f1c00000 with size 800000
322[ 0.319561] ION heap secure_display created at 0x00000000f5c00000 with size a000000
323[ 0.340381] platform soc:qcom,ion:qcom,ion-heap@14: ion_secure_carveout: creating heap@0xa4c00000, size 0x3c00000
324[ 0.340388] ION heap secure_carveout created
325[ 0.340416] ION heap secure_heap created
326[ 0.341115] iommu: Adding device 8c0000.qcom,qupv3_0_geni_se:qcom,iommu_qupv3_0_geni_se_cb to group 0
327[ 0.341254] iommu: Adding device ac0000.qcom,qupv3_1_geni_se:qcom,iommu_qupv3_1_geni_se_cb to group 1
328[ 0.341387] iommu: Adding device cc0000.qcom,qupv3_2_geni_se:qcom,iommu_qupv3_2_geni_se_cb to group 2
329[ 0.341510] iommu: Adding device 26c0000.qcom,qupv3_3_geni_se:qcom,iommu_qupv3_3_geni_se_cb to group 3
330[ 0.341963] register_client_adhoc:find path.src 90 dest 512
331[ 0.342080] register_client_adhoc:find path.src 90 dest 585
332[ 0.342119] register_client_adhoc:find path.src 1 dest 676
333[ 0.342186] register_client_adhoc:find path.src 143 dest 777
334[ 0.342209] register_client_adhoc:Client handle 11 ipa
335[ 0.343504] ipa ipa3_smp2p_probe:6659 fail to get smp2p clk resp bit -517
336[ 0.343763] iommu: Adding device soc:ipa_smmu_ap to group 4
337[ 0.343891] iommu: Adding device soc:ipa_smmu_wlan to group 5
338[ 0.344007] iommu: Adding device soc:ipa_smmu_uc to group 6
339[ 0.344357] ipa ipa3_smp2p_probe:6659 fail to get smp2p clk resp bit -517
340[ 0.345100] Advanced Linux Sound Architecture Driver Initialized.
341[ 0.345502] Bluetooth: Core ver 2.22
342[ 0.345556] NET: Registered protocol family 31
343[ 0.345562] Bluetooth: HCI device and connection manager initialized
344[ 0.345574] Bluetooth: HCI socket layer initialized
345[ 0.345584] Bluetooth: L2CAP socket layer initialized
346[ 0.345603] Bluetooth: SCO socket layer initialized
347[ 0.345967] NetLabel: Initializing
348[ 0.345972] NetLabel: domain hash size = 128
349[ 0.345977] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO
350[ 0.346016] NetLabel: unlabeled traffic allowed by default
351[ 0.346065] pcie:pcie_init.
352[ 0.348890] pci-msm 1c00000.qcom,pcie: 1c00000.qcom,pcie supply vreg-3.3 not found, using dummy regulator
353[ 0.349103] pci-msm 1c00000.qcom,pcie: 1c00000.qcom,pcie supply gdsc-smmu not found, using dummy regulator
354[ 0.349450] register_client_adhoc:find path.src 45 dest 512
355[ 0.349704] register_client_adhoc:Client handle 12 pcie0
356[ 0.350527] msm_pcie_get_resources: PCIe: RC0 can't get tcsr resource.
357[ 0.350583] msm_pcie_probe: PCIe: RC0 could not get pinctrl sleep state
358[ 0.353088] pci-msm 1c08000.qcom,pcie: prop pinctrl-0 index 2 invalid phandle
359[ 0.353116] pci-msm: probe of 1c08000.qcom,pcie failed with error -22
360[ 0.353748] register_client_adhoc:find path.src 1 dest 590
361[ 0.353948] register_client_adhoc:find path.src 1 dest 589
362[ 0.354015] register_client_adhoc:find path.src 1 dest 596
363[ 0.354092] register_client_adhoc:Client handle 13 bus-proxy-client
364[ 0.355318] sched-energy energy-costs: cpu=0 eff=1024 [freq=300000 cap=64 power_d0=24] -> [freq=1785600 cap=379 power_d0=128]
365[ 0.355333] sched-energy energy-costs: cpu=1 eff=1024 [freq=300000 cap=64 power_d0=24] -> [freq=1785600 cap=379 power_d0=128]
366[ 0.355341] sched-energy energy-costs: cpu=2 eff=1024 [freq=300000 cap=64 power_d0=24] -> [freq=1785600 cap=379 power_d0=128]
367[ 0.355349] sched-energy energy-costs: cpu=3 eff=1024 [freq=300000 cap=64 power_d0=24] -> [freq=1785600 cap=379 power_d0=128]
368[ 0.355357] sched-energy energy-costs: cpu=4 eff=1740 [freq=710400 cap=257 power_d0=165] -> [freq=2419200 cap=872 power_d0=1022]
369[ 0.355365] sched-energy energy-costs: cpu=5 eff=1740 [freq=710400 cap=257 power_d0=165] -> [freq=2419200 cap=872 power_d0=1022]
370[ 0.355373] sched-energy energy-costs: cpu=6 eff=1740 [freq=710400 cap=257 power_d0=165] -> [freq=2419200 cap=872 power_d0=1022]
371[ 0.355380] sched-energy energy-costs: cpu=7 eff=1740 [freq=825600 cap=298 power_d0=227] -> [freq=2841600 cap=1024 power_d0=1427]
372[ 0.355388] sched-energy energy-costs: Sched-energy-costs capacity updated
373[ 0.355749] register_client_adhoc:find path.src 1 dest 589
374[ 0.355875] register_client_adhoc:Client handle 14 bps_gdsc_ahb
375[ 0.356187] bps_gdsc: supplied by pm8150l_s5_level
376[ 0.356734] register_client_adhoc:find path.src 1 dest 589
377[ 0.356826] register_client_adhoc:Client handle 15 ipe_0_gdsc_ahb
378[ 0.357101] ipe_0_gdsc: supplied by pm8150l_s5_level
379[ 0.357408] register_client_adhoc:find path.src 1 dest 589
380[ 0.357492] register_client_adhoc:Client handle 16 ipe_1_gdsc_ahb
381[ 0.357735] ipe_1_gdsc: supplied by pm8150l_s5_level
382[ 0.357969] register_client_adhoc:find path.src 1 dest 589
383[ 0.358044] register_client_adhoc:Client handle 17 ife_0_gdsc_ahb
384[ 0.358276] ife_0_gdsc: supplied by pm8150l_s5_level
385[ 0.358504] register_client_adhoc:find path.src 1 dest 589
386[ 0.358566] register_client_adhoc:Client handle 18 ife_1_gdsc_ahb
387[ 0.358795] ife_1_gdsc: supplied by pm8150l_s5_level
388[ 0.359001] register_client_adhoc:find path.src 1 dest 589
389[ 0.359068] register_client_adhoc:Client handle 19 titan_top_gdsc_ahb
390[ 0.359295] titan_top_gdsc: supplied by pm8150l_s5_level
391[ 0.359486] register_client_adhoc:find path.src 1 dest 590
392[ 0.359551] register_client_adhoc:Client handle 20 mdss_core_gdsc_ahb
393[ 0.359684] mdss_core_gdsc: supplied by pm8150l_s5_level
394[ 0.359954] register_client_adhoc:find path.src 1 dest 596
395[ 0.360068] register_client_adhoc:Client handle 21 mvsc_gdsc_ahb
396[ 0.360330] mvsc_gdsc: supplied by pm8150l_s5_level
397[ 0.360533] register_client_adhoc:find path.src 1 dest 596
398[ 0.360600] register_client_adhoc:Client handle 22 mvs0_gdsc_ahb
399[ 0.360825] mvs0_gdsc: supplied by pm8150l_s5_level
400[ 0.361047] register_client_adhoc:find path.src 1 dest 596
401[ 0.361115] register_client_adhoc:Client handle 23 mvs1_gdsc_ahb
402[ 0.361340] mvs1_gdsc: supplied by pm8150l_s5_level
403[ 0.361874] register_client_adhoc:find path.src 1 dest 589
404[ 0.361936] register_client_adhoc:Client handle 24 clk_camcc_debugfs
405[ 0.362535] cam_cc_bps_clk_src: set OPP pair(19200000 Hz: 49 uV) on ac6f000.qcom,bps
406[ 0.362692] cam_cc_bps_clk_src: set OPP pair(600000000 Hz: 257 uV) on ac6f000.qcom,bps
407[ 0.362821] cam_cc_cci_0_clk_src: set OPP pair(19200000 Hz: 49 uV) on ac4a000.qcom,cci
408[ 0.362845] cam_cc_cci_0_clk_src: set OPP pair(37500000 Hz: 65 uV) on ac4a000.qcom,cci
409[ 0.362931] cam_cc_cci_1_clk_src: set OPP pair(19200000 Hz: 49 uV) on ac4b000.qcom,cci
410[ 0.362979] cam_cc_cci_1_clk_src: set OPP pair(37500000 Hz: 65 uV) on ac4b000.qcom,cci
411[ 0.363112] cam_cc_csi0phytimer_clk_src: set OPP pair(19200000 Hz: 49 uV) on ac65000.qcom,csiphy
412[ 0.363138] cam_cc_csi0phytimer_clk_src: set OPP pair(300000000 Hz: 65 uV) on ac65000.qcom,csiphy
413[ 0.363236] cam_cc_csi1phytimer_clk_src: set OPP pair(19200000 Hz: 49 uV) on ac66000.qcom,csiphy
414[ 0.363260] cam_cc_csi1phytimer_clk_src: set OPP pair(300000000 Hz: 65 uV) on ac66000.qcom,csiphy
415[ 0.363332] cam_cc_csi2phytimer_clk_src: set OPP pair(19200000 Hz: 49 uV) on ac67000.qcom,csiphy
416[ 0.363355] cam_cc_csi2phytimer_clk_src: set OPP pair(300000000 Hz: 65 uV) on ac67000.qcom,csiphy
417[ 0.363449] cam_cc_csi3phytimer_clk_src: set OPP pair(19200000 Hz: 49 uV) on ac68000.qcom,csiphy
418[ 0.363479] cam_cc_csi3phytimer_clk_src: set OPP pair(300000000 Hz: 65 uV) on ac68000.qcom,csiphy
419[ 0.363766] cam_cc_icp_clk_src: set OPP pair(19200000 Hz: 49 uV) on ac00000.qcom,a5
420[ 0.363840] cam_cc_icp_clk_src: set OPP pair(600000000 Hz: 193 uV) on ac00000.qcom,a5
421[ 0.363946] cam_cc_ife_0_clk_src: set OPP pair(19200000 Hz: 49 uV) on acaf000.qcom,vfe0
422[ 0.364101] cam_cc_ife_0_clk_src: set OPP pair(950000000 Hz: 385 uV) on acaf000.qcom,vfe0
423[ 0.364201] cam_cc_ife_0_csid_clk_src: set OPP pair(19200000 Hz: 49 uV) on acb3000.qcom,csid0
424[ 0.364322] cam_cc_ife_0_csid_clk_src: set OPP pair(600000000 Hz: 257 uV) on acb3000.qcom,csid0
425[ 0.364448] cam_cc_ife_1_clk_src: set OPP pair(19200000 Hz: 49 uV) on acb6000.qcom,vfe1
426[ 0.364607] cam_cc_ife_1_clk_src: set OPP pair(950000000 Hz: 385 uV) on acb6000.qcom,vfe1
427[ 0.364707] cam_cc_ife_1_csid_clk_src: set OPP pair(19200000 Hz: 49 uV) on acba000.qcom,csid1
428[ 0.364829] cam_cc_ife_1_csid_clk_src: set OPP pair(600000000 Hz: 257 uV) on acba000.qcom,csid1
429[ 0.364928] cam_cc_ife_lite_0_clk_src: set OPP pair(19200000 Hz: 49 uV) on acc4000.qcom,vfe-lite0
430[ 0.365045] cam_cc_ife_lite_0_clk_src: set OPP pair(600000000 Hz: 257 uV) on acc4000.qcom,vfe-lite0
431[ 0.365175] cam_cc_ife_lite_0_csid_clk_src: set OPP pair(19200000 Hz: 49 uV) on acc8000.qcom,csid-lite0
432[ 0.365245] cam_cc_ife_lite_0_csid_clk_src: set OPP pair(600000000 Hz: 257 uV) on acc8000.qcom,csid-lite0
433[ 0.365350] cam_cc_ife_lite_1_clk_src: set OPP pair(19200000 Hz: 49 uV) on accb000.qcom,vfe-lite1
434[ 0.365462] cam_cc_ife_lite_1_clk_src: set OPP pair(600000000 Hz: 257 uV) on accb000.qcom,vfe-lite1
435[ 0.365568] cam_cc_ife_lite_1_csid_clk_src: set OPP pair(19200000 Hz: 49 uV) on accf000.qcom,csid-lite1
436[ 0.365661] cam_cc_ife_lite_1_csid_clk_src: set OPP pair(600000000 Hz: 257 uV) on accf000.qcom,csid-lite1
437[ 0.365833] cam_cc_ipe_0_clk_src: set OPP pair(19200000 Hz: 49 uV) on ac87000.qcom,ipe0
438[ 0.365952] cam_cc_ipe_0_clk_src: set OPP pair(600000000 Hz: 257 uV) on ac87000.qcom,ipe0
439[ 0.366994] cam_cc-sm8150 ad00000.qcom,camcc: Registered CAM CC clocks
440[ 0.367210] register_client_adhoc:find path.src 1 dest 590
441[ 0.367286] register_client_adhoc:Client handle 25 clk_dispcc_debugfs
442[ 0.367309] PLL is already enabled. Skipping configuration.
443[ 0.369369] disp_cc-sm8150 af00000.qcom,dispcc: Registered Display CC clocks
444[ 0.371210] npu_cc-sm8150 9910000.qcom,npucc: Registered NPU CC clocks
445[ 0.371319] register_client_adhoc:find path.src 1 dest 596
446[ 0.371387] register_client_adhoc:Client handle 26 clk_videocc_debugfs
447[ 0.371717] video_cc-sm8150 ab00000.qcom,videocc: Registered Video CC clocks
448[ 0.371780] reg-fixed-voltage soc:ext_5v_boost: could not find pctldev for node /soc/qcom,spmi@c440000/qcom,pm8150b@2/pinctrl@c000/otg_vbus_boost/otg_vbus_boost_default, deferring probe
449[ 0.371946] ipa ipa3_smp2p_probe:6659 fail to get smp2p clk resp bit -517
450[ 0.372446] clocksource: Switched to clocksource arch_sys_counter
451[ 0.402025] VFS: Disk quotas dquot_6.6.0
452[ 0.402123] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
453[ 0.403201] register_client_adhoc:find path.src 1 dest 589
454[ 0.403439] register_client_adhoc:find path.src 1 dest 596
455[ 0.403525] register_client_adhoc:find path.src 1 dest 590
456[ 0.403611] register_client_adhoc:Client handle 27 clk_measure
457[ 0.404896] mdss_pll_probe: MDSS pll label = MDSS DSI 0 PLL
458[ 0.404908] mdss_pll_probe: mdss_pll_probe: label=MDSS DSI 0 PLL PLL SSC enabled
459[ 0.405159] mdss_pll ae94900.qcom,mdss_dsi_pll: Failed to create debugfs directory
460[ 0.405174] mdss_pll ae94900.qcom,mdss_dsi_pll: Failed to create debugfs directory
461[ 0.405182] mdss_pll ae94900.qcom,mdss_dsi_pll: Failed to create debugfs directory
462[ 0.405190] mdss_pll ae94900.qcom,mdss_dsi_pll: Failed to create debugfs directory
463[ 0.405200] mdss_pll ae94900.qcom,mdss_dsi_pll: Failed to create debugfs directory
464[ 0.405762] dsi_pll_clock_register_7nm: Registered DSI PLL ndx=0, clocks successfully
465[ 0.405795] mdss_pll_probe: MDSS pll label = MDSS DSI 1 PLL
466[ 0.405800] mdss_pll_probe: mdss_pll_probe: label=MDSS DSI 1 PLL PLL SSC enabled
467[ 0.405860] mdss_pll ae96900.qcom,mdss_dsi_pll: Failed to create debugfs directory
468[ 0.405869] mdss_pll ae96900.qcom,mdss_dsi_pll: Failed to create debugfs directory
469[ 0.405877] mdss_pll ae96900.qcom,mdss_dsi_pll: Failed to create debugfs directory
470[ 0.405886] mdss_pll ae96900.qcom,mdss_dsi_pll: Failed to create debugfs directory
471[ 0.405894] mdss_pll ae96900.qcom,mdss_dsi_pll: Failed to create debugfs directory
472[ 0.411273] dsi_pll_clock_register_7nm: Registered DSI PLL ndx=1, clocks successfully
473[ 0.411301] mdss_pll_probe: MDSS pll label = MDSS DP PLL
474[ 0.411314] mdss_pll_util_parse_dt_supply: no supply entry present
475[ 0.414644] NET: Registered protocol family 2
476[ 0.415000] TCP established hash table entries: 65536 (order: 7, 524288 bytes)
477[ 0.415462] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
478[ 0.416491] TCP: Hash tables configured (established 65536 bind 65536)
479[ 0.416718] UDP hash table entries: 4096 (order: 5, 131072 bytes)
480[ 0.416861] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes)
481[ 0.417135] NET: Registered protocol family 1
482[ 0.417165] PCI: CLS 0 bytes, default 128
483[ 0.417430] reg-fixed-voltage soc:ext_5v_boost: could not find pctldev for node /soc/qcom,spmi@c440000/qcom,pm8150b@2/pinctrl@c000/otg_vbus_boost/otg_vbus_boost_default, deferring probe
484[ 0.417648] ipa ipa3_smp2p_probe:6659 fail to get smp2p clk resp bit -517
485[ 0.417997] Trying to unpack rootfs image as initramfs...
486[ 0.687138] Freeing initrd memory: 16332K
487[ 0.689069] hw perfevents: enabled with armv8_pmuv3 PMU driver, 7 counters available
488[ 0.695337] audit: initializing netlink subsys (disabled)
489[ 0.695523] audit: type=2000 audit(0.689:1): state=initialized audit_enabled=0 res=1
490[ 0.695718] Initialise system trusted keyrings
491[ 0.695802] workingset: timestamp_bits=46 max_order=21 bucket_order=0
492[ 0.697426] Registering sdcardfs 0.1
493[ 0.697597] fuse init (API version 7.26)
494[ 0.697665] SELinux: Registering netfilter hooks
495[ 0.697976] pfk_ext4 [pfk_ext4_init]: PFK EXT4 inited successfully
496[ 0.697983] pfk_f2fs [pfk_f2fs_init]: PFK F2FS inited successfully
497[ 0.697992] pfk [pfk_init]: Driver initialized successfully
498[ 0.701795] Key type asymmetric registered
499[ 0.701803] Asymmetric key parser 'x509' registered
500[ 0.701867] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 241)
501[ 0.701877] io scheduler noop registered
502[ 0.701882] io scheduler deadline registered
503[ 0.701951] io scheduler cfq registered (default)
504[ 0.701957] io scheduler mq-deadline registered
505[ 0.701962] io scheduler kyber registered
506[ 0.704693] Virtual Services transport driver for OKL4 Axons
507[ 0.706059] iommu: Adding device 800000.qcom,gpi-dma to group 7
508[ 0.708160] iommu: Adding device a00000.qcom,gpi-dma to group 8
509[ 0.709858] iommu: Adding device c00000.qcom,gpi-dma to group 9
510[ 0.714158] iommu: Adding device 18800000.qcom,icnss to group 10
511[ 0.730749] icnss 18800000.qcom,icnss: for wcss_msa0 segments only will be dumped.
512[ 0.730981] icnss: Platform driver probed successfully
513[ 0.734014] memshare_child soc:qcom,memshare:qcom,client_1: for memshare_GPS segments only will be dumped.
514[ 0.734133] memshare_child soc:qcom,memshare:qcom,client_2: for memshare_FTM segments only will be dumped.
515[ 0.746429] memshare_child soc:qcom,memshare:qcom,client_3: for memshare_DIAG segments only will be dumped.
516[ 0.746824] register_client_adhoc:find path.src 125 dest 512
517[ 0.747083] register_client_adhoc:Client handle 28 scm_pas
518[ 0.747098] minidump-id not found for modem
519[ 0.747568] minidump-id not found for adsp
520[ 0.747869] minidump-id not found for slpi
521[ 0.748157] minidump-id not found for spss
522[ 0.748444] minidump-id not found for npu
523[ 0.748451] subsys-pil-tz 9800000.qcom,npu: for npu segments only will be dumped.
524[ 0.748584] register_client_adhoc:find path.src 154 dest 10070
525[ 0.748617] register_client_adhoc:Client handle 29 pil-cdsp
526[ 0.748623] minidump-id not found for cdsp
527[ 0.749193] register_client_adhoc:find path.src 63 dest 512
528[ 0.749289] register_client_adhoc:Client handle 30 pil-venus
529[ 0.749298] minidump-id not found for venus
530[ 0.749452] minidump-id not found for ipa_fws
531[ 0.749459] subsys-pil-tz soc:qcom,ipa_fws: for ipa_fws segments only will be dumped.
532[ 0.749623] minidump-id not found for a640_zap
533[ 0.749631] subsys-pil-tz soc:qcom,kgsl-hyp: for a640_zap segments only will be dumped.
534[ 0.749742] spcom: spcom_init: spcom driver version 2.1 23-April-2018.
535[ 0.751681] smp2p_sleepstate soc:qcom,smp2p_sleepstate: got smp2p-sleepstate-in irq 485
536[ 0.753391] msm_geni_serial c8c000.qcom,qup_uart: Wakeup byte 0xfd
537[ 0.753489] msm_geni_serial c8c000.qcom,qup_uart: Serial port0 added.FifoSize 64 is_console0
538[ 0.753712] c8c000.qcom,qup_uart: ttyHS0 at MMIO 0xc8c000 (irq = 442, base_baud = 0) is a MSM
539[ 0.753826] msm_geni_serial_init: Driver initialized
540[ 0.754278] register_client_adhoc:find path.src 1 dest 618
541[ 0.754391] register_client_adhoc:Client handle 31 msm-rng-noc
542[ 0.756692] random: crng init done
543[ 0.762549] iommu: Adding device soc:kgsl_iommu_test_device to group 11
544[ 0.762642] iommu: Adding device soc:kgsl_iommu_coherent_test_device to group 12
545[ 0.762700] iommu: Adding device soc:apps_iommu_test_device to group 13
546[ 0.762749] iommu: Adding device soc:apps_iommu_coherent_test_device to group 14
547[ 0.764779] register_client_adhoc:find path.src 20003 dest 20515
548[ 0.764894] register_client_adhoc:find path.src 20004 dest 20515
549[ 0.764930] register_client_adhoc:Client handle 32 disp_rsc_mnoc
550[ 0.764944] register_client_adhoc:find path.src 20001 dest 20513
551[ 0.764978] register_client_adhoc:Client handle 33 disp_rsc_llcc
552[ 0.764992] register_client_adhoc:find path.src 20000 dest 20512
553[ 0.765025] register_client_adhoc:Client handle 34 disp_rsc_ebi
554[ 0.765326] [sde_rsc_hw:rsc_hw_init:781]: sde rsc init successfully done
555[ 0.765372] [sde_rsc:sde_rsc_probe:1450]: sde rsc index:0 probed successfully
556[ 0.765843] dsi_phy ae94400.qcom,mdss_dsi_phy0: ae94400.qcom,mdss_dsi_phy0 supply gdsc not found, using dummy regulator
557[ 0.765912] msm-dsi-phy:[dsi_phy_driver_probe] Probe successful for dsi-phy-0
558[ 0.765941] dsi_phy ae96400.qcom,mdss_dsi_phy0: ae96400.qcom,mdss_dsi_phy0 supply gdsc not found, using dummy regulator
559[ 0.766007] msm-dsi-phy:[dsi_phy_driver_probe] Probe successful for dsi-phy-1
560[ 0.766317] AXI: get_pdata(): Error: Client name not found
561[ 0.766322] AXI: msm_bus_cl_get_pdata(): client has to provide missing entry for successful registration
562[ 0.766326] dsi-ctrl:[dsi_ctrl_dev_probe] Probe successful for dsi-ctrl-0
563[ 0.766443] AXI: get_pdata(): Error: Client name not found
564[ 0.766447] AXI: msm_bus_cl_get_pdata(): client has to provide missing entry for successful registration
565[ 0.766452] dsi-ctrl:[dsi_ctrl_dev_probe] Probe successful for dsi-ctrl-1
566[ 0.766837] OF: graph: no port node found in /soc/qcom,dsi-display-primary
567[ 0.766864] msm-dsi-panel:[dsi_panel_get:3362] [LCD]dsi_panel_get:3362 Dispparam enabled.
568[ 0.766895] msm-dsi-panel:[dsi_panel_parse_qsync_caps:1243] [samsung ea8076 fhd cmd dsi panel] qsync min fps not defined rc:-22
569[ 0.766900] msm-dsi-panel:[dsi_panel_get:3389] failed to parse qsync features, rc=-22
570[ 0.766917] msm-dsi-panel:[dsi_panel_parse_reset_sequence:1941] RESET SEQ LENGTH = 16
571[ 0.766941] msm-dsi-panel:[dsi_panel_parse_misc_features:1991] dsi_panel_parse_misc_features: ulps feature enabled
572[ 0.766948] msm-dsi-panel:[dsi_panel_parse_misc_features:1997] dsi_panel_parse_misc_features: ulps during suspend feature disabled
573[ 0.766989] msm-dsi-panel:[dsi_panel_parse_mi_config:3284] [LCD]dsi_panel_parse_mi_config:3284 Dispparam enabled.
574[ 0.766998] msm-dsi-panel:[dsi_panel_parse_mi_config:3298] Panel on dimming delay 200 ms
575[ 0.767004] msm-dsi-panel:[dsi_panel_parse_mi_config:3309] doze backlight threshold 8
576[ 0.767038] msm-dsi-panel:[dsi_panel_parse_elvss_dimming_config:3023] elvss dimming check enable
577[ 0.767407] iommu: Adding device ae00000.qcom,mdss_mdp to group 15
578[ 0.769222] iommu: Adding device 2c6a000.qcom,gmu:gmu_user to group 16
579[ 0.769803] iommu: Adding device 2c6a000.qcom,gmu:gmu_kernel to group 17
580[ 0.771718] register_client_adhoc:find path.src 26 dest 512
581[ 0.771826] register_client_adhoc:Client handle 35 grp3d
582[ 0.771835] register_client_adhoc:find path.src 26 dest 10036
583[ 0.771902] register_client_adhoc:Client handle 36 cnoc
584[ 0.771912] query_client_usecase_all: query_start
585[ 0.771947] query_client_usecase_all: query_start
586[ 0.772842] iommu: Adding device 2ca0000.qcom,kgsl-iommu:gfx3d_user to group 18
587[ 0.772915] iommu: Adding device 2ca0000.qcom,kgsl-iommu:gfx3d_secure to group 19
588[ 0.874774] brd: module loaded
589[ 0.878915] loop: module loaded
590[ 0.879029] zram: Added device: zram0
591[ 0.881019] QSEECOM: qseecom_probe: qseecom.qsee_version = 0x1400000
592[ 0.881043] QSEECOM: qseecom_retrieve_ce_data: Device does not support PFE
593[ 0.881049] QSEECOM: qseecom_probe: no-clock-support=0x1
594[ 0.881056] QSEECOM: qseecom_probe: qseecom.qsee_reentrancy_support = 2
595[ 0.881165] QSEECOM: qseecom_probe: qseecom.whitelist_support = 1
596[ 0.882708] qcom,qpnp-power-on c440000.qcom,spmi:qcom,pm8150@0:qcom,power-on@800: PMIC@SID0 Power-on reason: Triggered from Hard Reset and 'cold' boot
597[ 0.882740] qcom,qpnp-power-on c440000.qcom,spmi:qcom,pm8150@0:qcom,power-on@800: PMIC@SID0: Power-off reason: Triggered from PS_HOLD (PS_HOLD/MSM Controlled Shutdown)
598[ 0.882880] input: qpnp_pon as /devices/platform/soc/c440000.qcom,spmi/spmi-0/spmi0-00/c440000.qcom,spmi:qcom,pm8150@0:qcom,power-on@800/input/input0
599[ 0.883845] 0x8c0:0x41 0x8c1:0x0 0x8c2:0x0 0x8c3:0x0 0x8c4:0x80 0x8c5:0x2 0x8c6:0x0 0x8c7:0x80 0x8c8:0x0 0x8c9:0x0 0x8ca:0x0 0x8cb:0x0 0x842:0x7 0x84a:0x1 0x85a:0x1
600[ 0.885269] SDAM base=0xb100 size=128 registered successfully
601[ 0.885684] PMIC@SID2: PM8150B v2.0 options: 0, 0, 0, 0
602[ 0.885771] qcom,qpnp-power-on c440000.qcom,spmi:qcom,pm8150b@2:qcom,power-on@800: PMIC@SID2 Power-on reason: Triggered from CBL (External Power Supply) and 'cold' boot
603[ 0.885799] qcom,qpnp-power-on c440000.qcom,spmi:qcom,pm8150b@2:qcom,power-on@800: PMIC@SID2: Power-off reason: Triggered from SOFT (Software)
604[ 0.885959] 0x8c0:0x40 0x8c1:0x0 0x8c2:0x0 0x8c3:0x0 0x8c4:0x80 0x8c5:0x1 0x8c6:0x0 0x8c7:0x80 0x8c8:0x0 0x8c9:0x0 0x8ca:0x0 0x8cb:0x0
605[ 0.888372] PMIC@SID4: PM8150A v2.0 options: 0, 0, 0, 0
606[ 0.888462] qcom,qpnp-power-on c440000.qcom,spmi:qcom,pm8150l@4:qcom,power-on@800: PMIC@SID4 Power-on reason: Triggered from PON1 (Secondary PMIC) and 'cold' boot
607[ 0.888491] qcom,qpnp-power-on c440000.qcom,spmi:qcom,pm8150l@4:qcom,power-on@800: PMIC@SID4: Power-off reason: Triggered from SOFT (Software)
608[ 0.888647] 0x8c0:0x20 0x8c1:0x0 0x8c2:0x0 0x8c3:0x0 0x8c4:0x80 0x8c5:0x1 0x8c6:0x0 0x8c7:0x80 0x8c8:0x0 0x8c9:0x0 0x8ca:0x0 0x8cb:0x0
609[ 0.891395] LCDB: qpnp_lcdb_regulator_probe: LCDB module successfully registered! lcdb_en=0 ldo_voltage=4000mV ncp_voltage=4000mV bst_voltage=4700mV
610[ 0.893518] iommu: Adding device 1de0000.qcedev to group 20
611[ 0.893683] register_client_adhoc:find path.src 125 dest 512
612[ 0.893977] register_client_adhoc:Client handle 37 qcedev-noc
613[ 0.894335] QCE50: __qce_get_device_tree_data: CE operating frequency is not defined, setting to default 100MHZ
614[ 0.896102] qce 1de0000.qcedev: QTI Crypto 5.4.2 device found @0x1de0000
615[ 0.896435] sps:BAM 0x0000000001dc4000 is registered.
616[ 0.896620] sps:BAM 0x0000000001dc4000 (va:0xffffff80147c0000) enabled: ver:0x27, number of pipes:16
617[ 0.896977] QCE50: qce_sps_init: QTI MSM CE-BAM at 0x0000000001dc4000 irq 57
618[ 0.897201] iommu: Adding device 1de0000.qcedev:qcom_cedev_ns_cb to group 21
619[ 0.898087] qcedev_setup_context_bank Attached 1de0000.qcedev:qcom_cedev_ns_cb and create mapping
620[ 0.898094] qcedev_setup_context_bank Context Bank name:ns_context, is_secure:0, start_addr:0x60000000
621[ 0.898186] iommu: Adding device 1de0000.qcedev:qcom_cedev_s_cb to group 22
622[ 0.900926] qcedev_setup_context_bank Attached 1de0000.qcedev:qcom_cedev_s_cb and create mapping
623[ 0.900935] qcedev_setup_context_bank Context Bank name:secure_context, is_secure:1, start_addr:0xa0000000
624[ 0.901982] iommu: Adding device 1de0000.qcrypto to group 23
625[ 0.902042] register_client_adhoc:find path.src 125 dest 512
626[ 0.902202] register_client_adhoc:Client handle 38 qcrypto-noc
627[ 0.902421] QCE50: __qce_get_device_tree_data: CE operating frequency is not defined, setting to default 100MHZ
628[ 0.903873] qcrypto 1de0000.qcrypto: QTI Crypto 5.4.2 device found @0x1de0000
629[ 0.904342] QCE50: qce_sps_init: QTI MSM CE-BAM at 0x0000000001dc4000 irq 57
630[ 0.904616] qcrypto 1de0000.qcrypto: qcrypto-ecb-aes
631[ 0.904720] qcrypto 1de0000.qcrypto: qcrypto-cbc-aes
632[ 0.904871] qcrypto 1de0000.qcrypto: qcrypto-ctr-aes
633[ 0.904977] qcrypto 1de0000.qcrypto: qcrypto-ecb-des
634[ 0.905081] qcrypto 1de0000.qcrypto: qcrypto-cbc-des
635[ 0.905185] qcrypto 1de0000.qcrypto: qcrypto-ecb-3des
636[ 0.905306] qcrypto 1de0000.qcrypto: qcrypto-cbc-3des
637[ 0.905418] qcrypto 1de0000.qcrypto: qcrypto-xts-aes
638[ 0.905521] qcrypto 1de0000.qcrypto: qcrypto-sha1
639[ 0.905636] qcrypto 1de0000.qcrypto: qcrypto-sha256
640[ 0.905753] qcrypto 1de0000.qcrypto: qcrypto-aead-hmac-sha1-cbc-aes
641[ 0.905856] qcrypto 1de0000.qcrypto: qcrypto-aead-hmac-sha1-cbc-des
642[ 0.905964] qcrypto 1de0000.qcrypto: qcrypto-aead-hmac-sha1-cbc-3des
643[ 0.906079] qcrypto 1de0000.qcrypto: qcrypto-aead-hmac-sha256-cbc-aes
644[ 0.906181] qcrypto 1de0000.qcrypto: qcrypto-aead-hmac-sha256-cbc-des
645[ 0.906288] qcrypto 1de0000.qcrypto: qcrypto-aead-hmac-sha256-cbc-3des
646[ 0.906388] qcrypto 1de0000.qcrypto: qcrypto-hmac-sha1
647[ 0.906486] qcrypto 1de0000.qcrypto: qcrypto-hmac-sha256
648[ 0.906589] qcrypto 1de0000.qcrypto: qcrypto-aes-ccm
649[ 0.906687] qcrypto 1de0000.qcrypto: qcrypto-rfc4309-aes-ccm
650[ 0.908011] ufshcd-qcom 1d84000.ufshc: ufshcd_populate_vreg: Unable to find vccq-supply regulator, assuming enabled
651[ 0.910521] qcom_ice_get_pdevice: found ice device ffffffcf6ae92600
652[ 0.910526] qcom_ice_get_pdevice: matching platform device ffffffcf754fbc00
653[ 0.910717] register_client_adhoc:find path.src 123 dest 512
654[ 0.910895] register_client_adhoc:find path.src 1 dest 757
655[ 0.911021] register_client_adhoc:Client handle 39 ufshc_mem
656[ 0.911931] scsi host0: ufshcd
657[ 0.916523] qcom_ice 1d90000.ufsice: QC ICE 3.1.79 device found @0xffffff8014de8000
658[ 0.930631] SCSI Media Changer driver v0.25
659[ 0.933753] spmi spmi-1: SPMI PMIC arbiter debug bus controller added
660[ 0.933898] Ethernet Channel Bonding Driver: v3.7.1 (April 27, 2011)
661[ 0.934925] libphy: Fixed MDIO Bus: probed
662[ 0.934930] tun: Universal TUN/TAP device driver, 1.6
663[ 0.934970] sky2: driver version 1.30
664[ 0.935188] PPP generic driver version 2.4.2
665[ 0.935225] PPP BSD Compression module registered
666[ 0.935232] PPP Deflate Compression module registered
667[ 0.935286] PPP MPPE Compression module registered
668[ 0.935294] NET: Registered protocol family 24
669[ 0.935385] CLD80211: Initializing
670[ 0.935456] usbcore: registered new interface driver asix
671[ 0.935533] usbcore: registered new interface driver ax88179_178a
672[ 0.935550] usbcore: registered new interface driver cdc_ether
673[ 0.935560] usbcore: registered new interface driver net1080
674[ 0.935571] usbcore: registered new interface driver cdc_subset
675[ 0.935580] usbcore: registered new interface driver zaurus
676[ 0.935599] usbcore: registered new interface driver cdc_ncm
677[ 0.943989] msm_sharedmem: msm_sharedmem_probe: Device created for client 'rmtfs'
678[ 0.946050] iommu: Adding device a600000.ssusb to group 24
679[ 0.948691] dwc3 a600000.dwc3: changing max_speed on rev 00000000
680[ 0.949197] ufshcd-qcom 1d84000.ufshc: ufshcd_print_pwr_info:[RX, TX]: gear=[1, 1], lane[1, 1], pwr[SLOWAUTO_MODE, SLOWAUTO_MODE], rate = 0
681[ 0.950643] register_client_adhoc:find path.src 61 dest 512
682[ 0.950929] register_client_adhoc:find path.src 61 dest 676
683[ 0.951028] register_client_adhoc:find path.src 1 dest 583
684[ 0.951126] register_client_adhoc:Client handle 40 usb0
685[ 0.951515] msm-dwc3 a600000.ssusb: Not attached
686[ 0.953199] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
687[ 0.953221] ehci-pci: EHCI PCI platform driver
688[ 0.953236] ehci-platform: EHCI generic platform driver
689[ 0.953405] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
690[ 0.953414] ohci-pci: OHCI PCI platform driver
691[ 0.953432] ohci-platform: OHCI generic platform driver
692[ 0.953778] usbcore: registered new interface driver usb-storage
693[ 0.953794] usbcore: registered new interface driver usb_ehset_test
694[ 0.953804] usbcore: registered new interface driver lvs
695[ 0.955557] qpnp-pdphy c440000.qcom,spmi:qcom,pm8150b@2:qcom,usb-pdphy@1700: usbpd_create failed: -517
696[ 0.956524] input: qti-haptics as /devices/platform/soc/c440000.qcom,spmi/spmi-0/spmi0-03/c440000.qcom,spmi:qcom,pm8150b@3:qcom,haptics@c000/input/input1
697[ 0.956931] gf_platform: gf::irq_gpio:120
698[ 0.956995] input: uinput-goodix as /devices/virtual/input/input2
699[ 0.957029] gf_spi: version V1.2.01
700[ 0.957092] gf_spi: status = 0x0
701[ 0.957453] qcom,qpnp-rtc c440000.qcom,spmi:qcom,pm8150@0:qcom,pm8150_rtc: rtc core: registered qpnp_rtc as rtc0
702[ 0.957575] i2c /dev entries driver
703[ 0.958042] i2c_geni 890000.i2c: Bus frequency not specified, default to 400KHz.
704[ 0.961370] PMIC@SID0: (null) v2.0 options: 0, 0, 0, 0
705[ 0.961535] I2C PMIC: i2c_pmic_probe: I2C PMIC probe successful
706[ 0.962648] i2c_geni a84000.i2c: Bus frequency not specified, default to 400KHz.
707[ 0.963238] i2c_geni c80000.i2c: Bus frequency not specified, default to 400KHz.
708[ 0.963499] nq-nci 1-0028: ese GPIO <OPTIONAL> error getting from OF node
709[ 0.963576] nq-nci 1-0028: nqx_probe: ese gpio not provided
710[ 0.963879] lirc_dev: IR Remote Control driver registered, major 495
711[ 0.963886] IR NEC protocol handler initialized
712[ 0.963891] IR RC5(x/sz) protocol handler initialized
713[ 0.963897] IR RC6 protocol handler initialized
714[ 0.963902] IR JVC protocol handler initialized
715[ 0.963907] IR Sony protocol handler initialized
716[ 0.963913] IR SANYO protocol handler initialized
717[ 0.963919] IR Sharp protocol handler initialized
718[ 0.963923] IR MCE Keyboard/mouse protocol handler initialized
719[ 0.963928] IR LIRC bridge handler initialized
720[ 0.963933] IR XMP protocol handler initialized
721[ 0.963999] ir-spi spi1.0: lirc_dev: driver ir-spi registered at minor = 0
722[ 0.964312] genirq: irq_chip msmgpio-dc did not update eff. affinity mask of irq 161
723[ 0.964378] nq-nci 1-0028: nqx_probe: probing NFCC NQxxx exited successfully
724[ 0.964570] iommu: Adding device 9800000.qcom,msm_npu to group 25
725[ 0.964649] msm_npu: unable to get qfprom_physical resource
726[ 0.967930] iommu: Adding device aa00000.qcom,vidc:non_secure_cb to group 26
727[ 0.968653] iommu: Adding device aa00000.qcom,vidc:secure_non_pixel_cb to group 27
728[ 0.971070] iommu: Adding device aa00000.qcom,vidc:secure_bitstream_cb to group 28
729[ 0.972646] iommu: Adding device aa00000.qcom,vidc:secure_pixel_cb to group 29
730[ 0.974149] platform aa00000.qcom,vidc:qcom,msm-vidc,mem_cdsp: assigned reserved memory node cdsp_region
731[ 0.975660] iommu: Adding device soc:qcom,cam_smmu:msm_cam_smmu_ife to group 30
732[ 0.975737] iommu: Adding device soc:qcom,cam_smmu:msm_cam_smmu_jpeg to group 31
733[ 0.975763] platform soc:qcom,cam_smmu:msm_cam_icp_fw: assigned reserved memory node camera_region@8b700000
734[ 0.975864] iommu: Adding device soc:qcom,cam_smmu:msm_cam_smmu_icp to group 32
735[ 0.975949] iommu: Adding device soc:qcom,cam_smmu:msm_cam_smmu_cpas_cdm to group 33
736[ 0.976052] iommu: Adding device soc:qcom,cam_smmu:msm_cam_smmu_fd to group 34
737[ 0.976118] iommu: Adding device soc:qcom,cam_smmu:msm_cam_smmu_lrme to group 35
738[ 0.977182] register_client_adhoc:find path.src 1 dest 589
739[ 0.977459] register_client_adhoc:Client handle 40 cam_ahb
740[ 0.977713] register_client_adhoc:find path.src 136 dest 512
741[ 0.977801] register_client_adhoc:Client handle 41 cam_hf_1_mnoc
742[ 0.977923] register_client_adhoc:find path.src 146 dest 778
743[ 0.977953] register_client_adhoc:Client handle 42 cam_hf_1_camnoc
744[ 0.977972] register_client_adhoc:find path.src 145 dest 512
745[ 0.978058] register_client_adhoc:Client handle 43 cam_hf_2_mnoc
746[ 0.978162] register_client_adhoc:find path.src 147 dest 778
747[ 0.978186] register_client_adhoc:Client handle 44 cam_hf_2_camnoc
748[ 0.978204] register_client_adhoc:find path.src 137 dest 512
749[ 0.978281] register_client_adhoc:Client handle 45 cam_sf_1_mnoc
750[ 0.978389] register_client_adhoc:find path.src 148 dest 778
751[ 0.978413] register_client_adhoc:Client handle 46 cam_sf_1_camnoc
752[ 0.987106] CAM_ERR: CAM-IRQ-CTRL: cam_irq_controller_subscribe_irq: 268 Invalid params: bh_handler=ffffff8b0b4d3bf8 bh=0000000000000000 bh_enq_f=ffffff8b0cb2c840
753[ 0.987115] CAM_ERR: CAM-ISP: cam_vfe_bus_deinit_hw: 3330 Failed to unsubscribe error irq rc=-22
754[ 0.989245] CAM_ERR: CAM-IRQ-CTRL: cam_irq_controller_subscribe_irq: 268 Invalid params: bh_handler=ffffff8b0b4d3bf8 bh=0000000000000000 bh_enq_f=ffffff8b0cb2c840
755[ 0.989251] CAM_ERR: CAM-ISP: cam_vfe_bus_deinit_hw: 3330 Failed to unsubscribe error irq rc=-22
756[ 0.989707] CAM_ERR: CAM-UTIL: cam_soc_util_get_option_clk_by_name: 522 No clk named ife_dsp_clk found. Dev vfe2
757[ 0.989709] CAM_WARN: CAM-ISP: cam_vfe_init_soc_resources: 109 option clk get failed
758[ 0.989761] CAM_WARN: CAM-ISP: cam_vfe_top_ver2_init: 785 Invalid mux type: 0
759[ 0.990988] CAM_ERR: CAM-IRQ-CTRL: cam_irq_controller_subscribe_irq: 268 Invalid params: bh_handler=ffffff8b0b4d3bf8 bh=0000000000000000 bh_enq_f=ffffff8b0cb2c840
760[ 0.990995] CAM_ERR: CAM-ISP: cam_vfe_bus_deinit_hw: 3330 Failed to unsubscribe error irq rc=-22
761[ 0.991347] CAM_ERR: CAM-UTIL: cam_soc_util_get_option_clk_by_name: 522 No clk named ife_dsp_clk found. Dev vfe3
762[ 0.991349] CAM_WARN: CAM-ISP: cam_vfe_init_soc_resources: 109 option clk get failed
763[ 0.991390] CAM_WARN: CAM-ISP: cam_vfe_top_ver2_init: 785 Invalid mux type: 0
764[ 0.992623] CAM_ERR: CAM-IRQ-CTRL: cam_irq_controller_subscribe_irq: 268 Invalid params: bh_handler=ffffff8b0b4d3bf8 bh=0000000000000000 bh_enq_f=ffffff8b0cb2c840
765[ 0.992629] CAM_ERR: CAM-ISP: cam_vfe_bus_deinit_hw: 3330 Failed to unsubscribe error irq rc=-22
766[ 0.994624] CAM_INFO: CAM-ISP: cam_isp_dev_probe: 171 Camera ISP probe complete
767[ 0.996005] CAM_ERR: CAM-CCI: cam_cci_platform_probe: 405 Device Type :0
768[ 0.996659] CAM_INFO: CAM: cam_res_mgr_probe: 689 Disable shared gpio support.
769[ 0.997499] CAM_ERR: CAM-CCI: cam_cci_platform_probe: 405 Device Type :1
770[ 0.998560] CAM_INFO: CAM-ACTUATOR: cam_actuator_parse_dt: 69 No GPIO found
771[ 0.998583] CAM_INFO: CAM-ACTUATOR: cam_actuator_parse_dt: 69 No GPIO found
772[ 0.998608] CAM_INFO: CAM-ACTUATOR: cam_actuator_parse_dt: 69 No GPIO found
773[ 0.998669] CAM_INFO: CAM-ACTUATOR: cam_actuator_parse_dt: 69 No GPIO found
774[ 0.999400] CAM_INFO: CAM-FLASH: cam_get_source_node_info: 118 op-current: read failed
775[ 0.999406] CAM_INFO: CAM-FLASH: cam_get_source_node_info: 129 max-duration prop unavailable: -22
776[ 0.999420] CAM_WARN: CAM-FLASH: cam_get_source_node_info: 205 op-current prop unavailable: -22
777[ 1.002327] CAM_ERR: CAM-SMMU: cam_smmu_create_add_handle_in_table: 687 Error: cam-secure already got handle 0x42ecb
778[ 1.004380] CAM_INFO: CAM-JPEG: cam_jpeg_dev_probe: 170 Camera JPEG probe complete
779[ 1.012122] usbcore: registered new interface driver uvcvideo
780[ 1.012136] USB Video Class driver (1.1.1)
781[ 1.012710] FG: fg_clear_dma_errors_if_any: dma_sts: 0
782[ 1.014327] FG_DELTA_ESR_IRQ: current vote is now 1 voted by fg_delta_esr_irq,0, previous voted 0
783[ 1.014662] esr_charging_timer set to 0/7
784[ 1.014992] esr_discharging_timer set to 0/7
785[ 1.015992] Alarmtimer { swapper/0', '106015'}
786[ 1.015999] FG: fg_gen4_esr_fast_calib_config: Enabling ESR fast calibration
787[ 1.017670] (NULL device *): hwmon_device_register() is deprecated. Please convert the driver to use hwmon_device_register_with_info().
788[ 1.017900] SerialNumber:0998a0118a4e000000000000
789[ 1.019892] MMinfo:USN:0998a0118a4e000000000000
790[ 1.020500] MMinfo:MDT:2840
791[ 1.021132] MMinfo:A:0x01,B:0x01
792[ 1.021859] FG_DELTA_BSOC_IRQ: current vote is now 0 voted by fg_delta_bsoc_irq,0, previous voted 0
793[ 1.021866] FG_MEM_ATTN_IRQ: current vote is now 0 voted by fg_mem_attn_irq,0, previous voted 0
794[ 1.021874] FG: fg_gen4_mem_attn_irq_en_cb: disabled mem_attn irq
795[ 1.022203] FG: fg_gen4_probe: battery SOC:100 voltage: 4377186uV temp: 247 id: 67900 ohms
796[ 1.022701] QNOVO_CHG_READY: current vote is now 0 voted by USB_READY_VOTER,0, previous voted 0
797[ 1.022707] QNOVO_NOT_OK: current vote is now 1 voted by CHG_READY_VOTER,0, previous voted 0
798[ 1.022714] QNOVO_DISABLE: current vote is now 1 voted by ok_to_qnovo_voter,0, previous voted 0
799[ 1.022720] QNOVO_PT_DIS: current vote is now 1 voted by QNOVO_OVERALL_VOTER,0, previous voted 0
800[ 1.023369] Couldn't parse device tree rc=-517
801[ 1.023567] SMB1390: smb1390_probe: Couldn't parse device tree rc=-517
802[ 1.024746] idtp9220 0-003b: [idt] success probe idtp922x driver
803[ 1.027036] of_batterydata_get_best_profile: f1_atl found
804[ 1.027261] FG: is_profile_load_required: Battery profile integrity bit is set
805[ 1.027576] FG: is_profile_load_required: Battery profile is same, not loading it
806[ 1.027977] ufshcd-qcom 1d84000.ufshc: ufshcd_print_pwr_info:[RX, TX]: gear=[3, 3], lane[2, 2], pwr[FAST MODE, FAST MODE], rate = 2
807[ 1.028652] FG: soc_work_fn: adjust_soc: s 50 r 175048 i -65 v 4377 t 247 cc 3 m 0xff
808[ 1.028685] scsi 0:0:0:49488: Well-known LUN SKhynix H28S8Q302CMR A103 PQ: 0 ANSI: 6
809[ 1.028922] FG: fg_gen4_bp_params_config: Rslow_low: 0
810[ 1.029474] FG: profile_load_work: profile loaded successfully
811[ 1.029485] FG: status_change_work: Charger not available?!
812[ 1.029492] FG: status_change_work: charge_status:-22 charge_type:0 charge_done:0
813[ 1.029637] scsi 0:0:0:49456: Well-known LUN SKhynix H28S8Q302CMR A103 PQ: 0 ANSI: 6
814[ 1.030157] i2c_geni 890000.i2c: i2c error :-107
815[ 1.030234] i2c_geni 890000.i2c: i2c error :-107
816[ 1.030239] idtp9220 0-003b: vout regulator get vol: 46592
817[ 1.030463] scsi 0:0:0:49476: Well-known LUN SKhynix H28S8Q302CMR A103 PQ: 0 ANSI: 6
818[ 1.031670] scsi 0:0:0:0: Direct-Access SKhynix H28S8Q302CMR A103 PQ: 0 ANSI: 6
819[ 1.032321] scsi 0:0:0:1: Direct-Access SKhynix H28S8Q302CMR A103 PQ: 0 ANSI: 6
820[ 1.032846] scsi 0:0:0:2: Direct-Access SKhynix H28S8Q302CMR A103 PQ: 0 ANSI: 6
821[ 1.033387] scsi 0:0:0:3: Direct-Access SKhynix H28S8Q302CMR A103 PQ: 0 ANSI: 6
822[ 1.033883] scsi 0:0:0:4: Direct-Access SKhynix H28S8Q302CMR A103 PQ: 0 ANSI: 6
823[ 1.034410] scsi 0:0:0:5: Direct-Access SKhynix H28S8Q302CMR A103 PQ: 0 ANSI: 6
824[ 1.035169] device-mapper: uevent: version 1.0.3
825[ 1.035261] device-mapper: ioctl: 4.37.0-ioctl (2017-09-20) initialised: dm-devel@redhat.com
826[ 1.035560] bt_dt_parse_vreg_info: qca,bt-vdd-vl: is not provided in device tree
827[ 1.035564] bt_dt_parse_vreg_info: qca,bt-vdd-vm: is not provided in device tree
828[ 1.035567] bt_dt_parse_vreg_info: qca,bt-vdd-5c: is not provided in device tree
829[ 1.035570] bt_dt_parse_vreg_info: qca,bt-vdd-vh: is not provided in device tree
830[ 1.035574] bt_dt_parse_vreg_info: qca,bt-vdd-io: is not provided in device tree
831[ 1.035577] bt_dt_parse_vreg_info: qca,bt-vdd-xtal: is not provided in device tree
832[ 1.035585] bt_dt_parse_vreg_info: qca,bt-chip-pwd: is not provided in device tree
833[ 1.035590] bt_power_populate_dt_pinfo: bt-reset-gpio not provided in device tree
834[ 1.035593] bt_dt_parse_clk_info: clocks is not provided in device tree
835[ 1.035596] bt_power_populate_dt_pinfo: clock not provided in device tree
836[ 1.035779] sd 0:0:0:1: [sdb] Write Protect is off
837[ 1.035790] sd 0:0:0:1: [sdb] Mode Sense: 00 32 00 10
838[ 1.035925] EDAC DEVICE0: Giving out device to module soc:kryo-erp controller cache: DEV soc:kryo-erp (INTERRUPT)
839[ 1.036429] sdhci: Secure Digital Host Controller Interface driver
840[ 1.036433] sdhci: Copyright(c) Pierre Ossman
841[ 1.036436] sdhci-pltfm: SDHCI platform and OF driver helper
842[ 1.036920] usbcore: registered new interface driver usbhid
843[ 1.036923] usbhid: USB HID core driver
844[ 1.036983] ashmem: initialized
845[ 1.037116] ipa_ut ipa_ut_module_init:1043 Loading IPA test module...
846[ 1.037454] sd 0:0:0:4: [sde] Write Protect is off
847[ 1.037464] sd 0:0:0:4: [sde] Mode Sense: 00 32 00 10
848[ 1.037472] sd 0:0:0:5: [sdf] Write Protect is off
849[ 1.037481] sd 0:0:0:5: [sdf] Mode Sense: 00 32 00 10
850[ 1.037983] sd 0:0:0:0: [sda] Write Protect is off
851[ 1.037993] sd 0:0:0:0: [sda] Mode Sense: 00 32 00 10
852[ 1.038674] sd 0:0:0:3: [sdd] Write Protect is off
853[ 1.038683] sd 0:0:0:3: [sdd] Mode Sense: 00 32 00 10
854[ 1.038685] sdb: sdb1 sdb2
855[ 1.040133] FG: fg_psy_get_property: unsupported property 4
856[ 1.040207] bimc-bwmon 90b6400.qcom,cpu-cpu-llcc-bwmon: BW HWmon governor registered.
857[ 1.040233] sd 0:0:0:2: [sdc] Write Protect is off
858[ 1.040242] sd 0:0:0:2: [sdc] Mode Sense: 00 32 00 10
859[ 1.040246] bimc-bwmon 90cd000.qcom,cpu-llcc-ddr-bwmon: BW HWmon governor registered.
860[ 1.040269] bimc-bwmon 9960300.qcom,npu-npu-ddr-bwmon: BW HWmon governor registered.
861[ 1.041478] arm-memlat-mon soc:qcom,cpu0-cpu-l3-latmon: Memory Latency governor registered.
862[ 1.041505] arm-memlat-mon soc:qcom,cpu4-cpu-l3-latmon: Memory Latency governor registered.
863[ 1.041523] arm-memlat-mon soc:qcom,cpu7-cpu-l3-latmon: Memory Latency governor registered.
864[ 1.041541] arm-memlat-mon soc:qcom,cpu0-cpu-llcc-latmon: Memory Latency governor registered.
865[ 1.041565] arm-memlat-mon soc:qcom,cpu4-cpu-llcc-latmon: Memory Latency governor registered.
866[ 1.041585] arm-memlat-mon soc:qcom,cpu0-llcc-ddr-latmon: Memory Latency governor registered.
867[ 1.041605] arm-memlat-mon soc:qcom,cpu4-llcc-ddr-latmon: Memory Latency governor registered.
868[ 1.041626] arm-memlat-mon soc:qcom,cpu4-computemon: Compute governor registered.
869[ 1.041925] sde: sde1 sde2 sde3 sde4 sde5 sde6 sde7 sde8 sde9 sde10 sde11 sde12 sde13 sde14 sde15 sde16 sde17 sde18 sde19 sde20 sde21 sde22 sde23 sde24 sde25 sde26 sde27 sde28 sde29 sde30 sde31 sde32 sde33 sde34 sde35 sde36 sde37 sde38 sde39 sde40 sde41 sde42 sde43 sde44 sde45 sde46 sde47 sde48 sde49 sde50 sde51 sde52 sde53 sde54
870[ 1.042337] register_client_adhoc:find path.src 1 dest 770
871[ 1.042411] sda: sda1 sda2 sda3 sda4 sda5 sda6 sda7 sda8 sda9 sda10 sda11 sda12 sda13 sda14 sda15 sda16 sda17 sda18 sda19 sda20 sda21 sda22 sda23 sda24 sda25 sda26 sda27 sda28 sda29 sda30 sda31 sda32
872[ 1.042423] register_client_adhoc:Client handle 47 soc:qcom,cpu-cpu-llcc-bw
873[ 1.043015] register_client_adhoc:find path.src 129 dest 512
874[ 1.043045] register_client_adhoc:Client handle 48 soc:qcom,cpu-llcc-ddr-bw
875[ 1.043261] sdd: sdd1 sdd2 sdd3 sdd4 sdd5
876[ 1.043791] register_client_adhoc:find path.src 154 dest 512
877[ 1.043862] register_client_adhoc:Client handle 49 soc:qcom,npu-npu-ddr-bw
878[ 1.044070] register_client_adhoc:find path.src 1 dest 770
879[ 1.044094] register_client_adhoc:Client handle 51 soc:qcom,cpu0-cpu-llcc-lat
880[ 1.044285] register_client_adhoc:find path.src 1 dest 770
881[ 1.044307] register_client_adhoc:Client handle 50 soc:qcom,cpu4-cpu-llcc-lat
882[ 1.044590] register_client_adhoc:find path.src 129 dest 512
883[ 1.044612] register_client_adhoc:Client handle 52 soc:qcom,cpu0-llcc-ddr-lat
884[ 1.044933] register_client_adhoc:find path.src 129 dest 512
885[ 1.044956] register_client_adhoc:Client handle 53 soc:qcom,cpu4-llcc-ddr-lat
886[ 1.044959] sdf: sdf1 sdf2 sdf3 sdf4 sdf5 sdf6
887[ 1.045236] register_client_adhoc:find path.src 129 dest 512
888[ 1.045238] sdc: sdc1 sdc2
889[ 1.045264] register_client_adhoc:Client handle 54 soc:qcom,cpu4-cpu-ddr-latfloor
890[ 1.045452] register_client_adhoc:find path.src 1 dest 627
891[ 1.045528] register_client_adhoc:Client handle 55 soc:qcom,snoc_cnoc_keepalive
892[ 1.045692] register_client_adhoc:find path.src 154 dest 10070
893[ 1.045709] register_client_adhoc:Client handle 56 soc:qcom,cdsp_keepalive
894[ 1.045991] register_client_adhoc:find path.src 26 dest 512
895[ 1.046041] register_client_adhoc:Client handle 57 soc:qcom,gpubw
896[ 1.048103] qcom-llcc-pmu 90cc000.llcc-pmu: Registered llcc_pmu, type: 7
897[ 1.048253] coresight-tmc 6b09000.tmc: invalid cti data
898[ 1.048282] iommu: Adding device 6048000.tmc to group 36
899[ 1.048547] coresight-tmc 6048000.tmc: failed to get flush cti, defer probe
900[ 1.048727] coresight-tmc 6047000.tmc: failed to get flush cti, defer probe
901[ 1.050302] coresight-stm 6002000.stm: stm_register_device failed, probing deffered
902[ 1.050333] OF: graph: no port node found in /soc/cti@78e0000
903[ 1.050371] OF: graph: no port node found in /soc/cti@78f0000
904[ 1.050405] OF: graph: no port node found in /soc/cti@7900000
905[ 1.050440] OF: graph: no port node found in /soc/cti@6a02000
906[ 1.050472] OF: graph: no port node found in /soc/cti@6a03000
907[ 1.050503] OF: graph: no port node found in /soc/cti@6a10000
908[ 1.050536] OF: graph: no port node found in /soc/cti@6a11000
909[ 1.050570] OF: graph: no port node found in /soc/cti@6c09000
910[ 1.050603] OF: graph: no port node found in /soc/cti@6c0a000
911[ 1.050636] OF: graph: no port node found in /soc/cti@6c29000
912[ 1.050670] OF: graph: no port node found in /soc/cti@6c2a000
913[ 1.050703] OF: graph: no port node found in /soc/cti@6010000
914[ 1.050734] OF: graph: no port node found in /soc/cti@6011000
915[ 1.050787] OF: graph: no port node found in /soc/cti@6012000
916[ 1.050819] OF: graph: no port node found in /soc/cti@6013000
917[ 1.050851] OF: graph: no port node found in /soc/cti@6014000
918[ 1.050884] OF: graph: no port node found in /soc/cti@6015000
919[ 1.050916] OF: graph: no port node found in /soc/cti@6016000
920[ 1.050947] OF: graph: no port node found in /soc/cti@6017000
921[ 1.050980] OF: graph: no port node found in /soc/cti@6018000
922[ 1.051012] OF: graph: no port node found in /soc/cti@6019000
923[ 1.051044] OF: graph: no port node found in /soc/cti@601a000
924[ 1.051077] OF: graph: no port node found in /soc/cti@601b000
925[ 1.051109] OF: graph: no port node found in /soc/cti@601c000
926[ 1.051140] OF: graph: no port node found in /soc/cti@601d000
927[ 1.051174] OF: graph: no port node found in /soc/cti@601e000
928[ 1.051205] OF: graph: no port node found in /soc/cti@601f000
929[ 1.051239] OF: graph: no port node found in /soc/cti@7020000
930[ 1.051275] OF: graph: no port node found in /soc/cti@7120000
931[ 1.051310] OF: graph: no port node found in /soc/cti@7220000
932[ 1.051345] OF: graph: no port node found in /soc/cti@7320000
933[ 1.051379] OF: graph: no port node found in /soc/cti@7420000
934[ 1.051414] OF: graph: no port node found in /soc/cti@7520000
935[ 1.051448] OF: graph: no port node found in /soc/cti@7620000
936[ 1.051481] OF: graph: no port node found in /soc/cti@7720000
937[ 1.051516] OF: graph: no port node found in /soc/cti@6b04000
938[ 1.054234] OF: graph: no port node found in /soc/csr@0x6001000
939[ 1.054253] coresight-csr 6001000.csr: CSR initialized: coresight-csr
940[ 1.054265] OF: graph: no port node found in /soc/csr@6b0e000
941[ 1.054283] coresight-csr 6b0e000.csr: CSR initialized: coresight-swao-csr
942[ 1.054403] OF: graph: no port node found in /soc/hwevent@0x091866F0
943[ 1.054423] coresight-hwevent 91866f0.hwevent: Hardware Event driver initialized
944[ 1.054563] coresight-dummy soc:tpdm@699c000: Dummy device initialized
945[ 1.054584] coresight-dummy soc:dummy_sink: Dummy device initialized
946[ 1.054745] coresight-remote-etm soc:turing_etm0: Remote ETM initialized
947[ 1.054802] coresight-remote-etm soc:modem_etm0: Remote ETM initialized
948[ 1.054858] coresight-remote-etm soc:audio_etm0: Remote ETM initialized
949[ 1.054910] coresight-remote-etm soc:ssc_etm0: Remote ETM initialized
950[ 1.054966] OF: graph: no port node found in /soc/tgu@6b0c000
951[ 1.055371] usbcore: registered new interface driver snd-usb-audio
952[ 1.055450] iommu: Adding device soc:usb_audio_qmi_dev to group 37
953[ 1.056035] GACT probability NOT on
954[ 1.056042] Mirror/redirect action on
955[ 1.056046] u32 classifier
956[ 1.056048] Actions configured
957[ 1.056053] Netfilter messages via NETLINK v0.30.
958[ 1.056177] nf_conntrack version 0.5.0 (65536 buckets, 262144 max)
959[ 1.056209] ctnetlink v0.93: registering with nfnetlink.
960[ 1.056374] xt_time: kernel timezone is -0000
961[ 1.056415] IPv4 over IPsec tunneling driver
962[ 1.056538] ip_tables: (C) 2000-2006 Netfilter Core Team
963[ 1.056703] arp_tables: arp_tables: (C) 2002 David S. Miller
964[ 1.056733] Initializing XFRM netlink socket
965[ 1.056800] NET: Registered protocol family 10
966[ 1.057124] Segment Routing with IPv6
967[ 1.057144] mip6: Mobile IPv6
968[ 1.057149] ip6_tables: (C) 2000-2006 Netfilter Core Team
969[ 1.057342] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver
970[ 1.057487] NET: Registered protocol family 17
971[ 1.057492] NET: Registered protocol family 15
972[ 1.057499] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this.
973[ 1.057501] Ebtables v2.0 registered
974[ 1.057584] l2tp_core: L2TP core driver, V2.0
975[ 1.057588] l2tp_ppp: PPPoL2TP kernel driver, V2.0
976[ 1.057589] l2tp_ip: L2TP IP encapsulation support (L2TPv3)
977[ 1.057595] l2tp_netlink: L2TP netlink interface
978[ 1.057601] l2tp_eth: L2TP ethernet pseudowire support (L2TPv3)
979[ 1.057603] l2tp_ip6: L2TP IP encapsulation support for IPv6 (L2TPv3)
980[ 1.057626] sctp: Hash tables configured (bind 256/256)
981[ 1.063296] dwc3 a600000.dwc3: changing max_speed on rev 00000000
982[ 1.063969] usb_bam_init: setting SPS_BAM_SMMU_EN flag with (a704000.qcom,usbbam)
983[ 1.064044] sps:BAM 0x000000000a704000 is registered.
984[ 1.064155] register_client_adhoc:find path.src 61 dest 512
985[ 1.064275] register_client_adhoc:find path.src 61 dest 676
986[ 1.064343] register_client_adhoc:find path.src 1 dest 583
987[ 1.064425] register_client_adhoc:Client handle 58 usb0
988[ 1.064622] msm-dwc3 a600000.ssusb: Not attached
989[ 1.065762] qpnp-pdphy c440000.qcom,spmi:qcom,pm8150b@2:qcom,usb-pdphy@1700: usbpd_create failed: -517
990[ 1.065983] PL_DISABLE: current vote is now 1 voted by CHG_STATE_VOTER,0, previous voted 0
991[ 1.066160] pm8150b_charger: smblib_masked_write: set 0x1544 mask:0x10,val:0x10
992[ 1.066268] USB_ICL: current vote is now -22 voted by (null),-22, previous voted -22
993[ 1.066270] DC_SUSPEND: current vote is now 0 voted by DEFAULT_VOTER,0, previous voted 0
994[ 1.066281] FCC: current vote is now 4800000 voted by HW_LIMIT_VOTER,0, previous voted -22
995[ 1.066283] FV: current vote is now 4400000 voted by HW_LIMIT_VOTER,0, previous voted -22
996[ 1.066285] DC_ICL: current vote is now 1000000 voted by DCIN_ADAPTER_VOTER,0, previous voted -22
997[ 1.066288] pm8150b_charger: smblib_dc_icl_vote_callback: set icl_ua 1000000 uA and get Vpsns = 372008 uV
998[ 1.066339] CHG_DISABLE: current vote is now 0 voted by DEFAULT_VOTER,0, previous voted 0
999[ 1.066785] (NULL device *): hwmon_device_register() is deprecated. Please convert the driver to use hwmon_device_register_with_info().
1000[ 1.066863] pm8150b_charger: smblib_get_prop_dfp_mode: TYPE_C_SRC_STATUS_REG = 0x00
1001[ 1.066866] AWAKE: current vote is now 1 voted by CHG_AWAKE_VOTER,0, previous voted 0
1002[ 1.066886] pm8150b_charger: smblib_request_dpdm: enabling DPDM regulator
1003[ 1.067169] pm8150b_charger: smblib_usb_plugin_locked: IRQ: usbin-plugin attached
1004[ 1.067196] pm8150b_charger: smblib_get_prop_dfp_mode: TYPE_C_SRC_STATUS_REG = 0x00
1005[ 1.067206] DC_ICL: current vote is now 100000 voted by DCIN_ADAPTER_VOTER,0, previous voted 1000000
1006[ 1.067208] pm8150b_charger: smblib_dc_icl_vote_callback: set icl_ua 100000 uA and get Vpsns = 36848 uV
1007[ 1.067220] SMB_EN_OVERRIDE: current vote is now 1 voted by PL_SMB_EN_VOTER,0, previous voted 0
1008[ 1.067241] idtp9220 0-003b: [idtp] dc plug out
1009[ 1.067244] pm8150b_charger: dc_plugin_irq_handler: dcin_present= 0, usbin_present= 1, cp_reason = 0
1010[ 1.067246] pm8150b_charger: typec_attach_detach_irq_handler: IRQ: determine-initial-status
1011[ 1.067330] USB_ICL: current vote is now 1500000 voted by SW_ICL_MAX_VOTER,3, previous voted -22
1012[ 1.067332] pm8150b_charger: smblib_handle_rp_change: CC change old_mode=0 new_mode=6
1013[ 1.067335] pm8150b_charger: typec_state_change_irq_handler: IRQ: cc-state-change; Type-C SOURCE_DEFAULT detected
1014[ 1.067345] pm8150b_charger: usb_source_change_irq_handler: APSD_STATUS = 0x01
1015[ 1.067362] pm8150b_charger: smblib_update_usb_type: APSD=CDP PD=0
1016[ 1.067380] pm8150b_charger: smblib_handle_apsd_done: IRQ: apsd-done rising; CDP detected
1017[ 1.067391] pm8150b_charger: usb_source_change_irq_handler: APSD_STATUS = 0x01
1018[ 1.067417] pm8150b_charger: batt_temp_changed_irq_handler: IRQ: determine-initial-status
1019[ 1.067420] pm8150b_charger: wdog_bark_irq_handler: IRQ: determine-initial-status
1020[ 1.067430] pm8150b_charger: typec_or_rid_detection_change_irq_handler: IRQ: determine-initial-status
1021[ 1.067508] get prop 42 is not supported in usb
1022[ 1.067831] i2c_geni 890000.i2c: i2c error :-107
1023[ 1.067906] i2c_geni 890000.i2c: i2c error :-107
1024[ 1.067909] idtp9220 0-003b: vout regulator get vol: 0
1025[ 1.068004] i2c_geni 890000.i2c: i2c error :-107
1026[ 1.068088] i2c_geni 890000.i2c: i2c error :-107
1027[ 1.068090] idtp9220 0-003b: vout regulator get vol: 0
1028[ 1.068344] pm8150b_charger: smblib_get_prop_typec_power_role: TYPE_C_MODE_CFG_REG = 0x12
1029[ 1.069610] Notified charger on float voltage and FCC
1030[ 1.070120] QNOVO_AWAKE: current vote is now 1 voted by USB_READY_VOTER,0, previous voted 0
1031[ 1.070509] of_batterydata_get_best_profile: f1_atl found
1032[ 1.071056] icl_ua value is: 1500000
1033[ 1.071426] Unbalanced enable for IRQ 603
1034[ 1.071432] ------------[ cut here ]------------
1035[ 1.071440] WARNING: CPU: 5 PID: 400 at /home/work/cepheus-p-stable-build/kernel/msm-4.14/kernel/irq/manage.c:528 enable_irq+0x90/0xe8
1036[ 1.071443] Modules linked in:
1037[ 1.071447] CPU: 5 PID: 400 Comm: kworker/5:4 Tainted: G S 4.14.83-perf-gbb83a2b #1
1038[ 1.071449] Hardware name: Qualcomm Technologies, Inc. SM8150 V2 PM8150 CEPHEUS (DT)
1039[ 1.071455] Workqueue: events status_change_work
1040[ 1.071458] task: ffffffcf69274f00 task.stack: ffffff8016820000
1041[ 1.071460] pc : enable_irq+0x90/0xe8
1042[ 1.071462] lr : enable_irq+0x90/0xe8
1043[ 1.071464] sp : ffffff8016823c60 pstate : 60c00085
1044[ 1.071466] x29: ffffff8016823c80 x28: ffffff8b0ca06000
1045[ 1.071468] x27: 0000000000000402 x26: ffffffcf69269f30
1046[ 1.071471] x25: ffffffcf7d816d20 x24: 000000007d81c505
1047[ 1.071473] x23: 0000000000000000 x22: ffffffcf6910dc60
1048[ 1.071476] x21: 000000000000025b x20: 000000000000025b
1049[ 1.071479] x19: ffffffcf691ada00 x18: ffffff8b0ce69000
1050[ 1.071482] x17: ffffff8b0b626d30 x16: 00000000000003f9
1051[ 1.071484] x15: ffffff8b0ce6b000 x14: 0000000000000000
1052[ 1.071486] x13: 4d41b8f58f427400 x12: 4d41b8f58f427400
1053[ 1.071489] x11: 0000000000000003 x10: ffffff8b0c4e2b38
1054[ 1.071491] x9 : 4d41b8f58f427400 x8 : 4d41b8f58f427400
1055[ 1.071494] x7 : 0000000000000003 x6 : 0000000000000005
1056[ 1.071496] x5 : 4d41b8f58f427400 x4 : 0000000000000001
1057[ 1.071499] x3 : 0000000000000001 x2 : 4d41b8f58f427400
1058[ 1.071501] x1 : 0000000000000080 x0 : 000000000000001d
1059[ 1.071504]
1060[ 1.071504] PC: 0xffffff8b0a9436c0:
1061[ 1.071506] 36c0 b9008268 14000010 3941f669 37180129 b9407a6a 320003e1 aa1303e0 2a1f03e2
1062[ 1.071512] 36e0 32160148 b9007a68 94000e80 14000006 b9402e61 d000b700 912f6000 97ffe55b
1063[ 1.071517] 3700 d4210000 f94003e1 320003e2 aa1303e0 97fff924 d001062a f94007e9 f947454a
1064[ 1.071522] 3720 eb09015f 54000161 a9427bfd a9414ff4 9100c3ff d65f03c0 d000b700 912fe000
1065[ 1.071528]
1066[ 1.071528] LR: 0xffffff8b0a9436c0:
1067[ 1.071529] 36c0 b9008268 14000010 3941f669 37180129 b9407a6a 320003e1 aa1303e0 2a1f03e2
1068[ 1.071535] 36e0 32160148 b9007a68 94000e80 14000006 b9402e61 d000b700 912f6000 97ffe55b
1069[ 1.071540] 3700 d4210000 f94003e1 320003e2 aa1303e0 97fff924 d001062a f94007e9 f947454a
1070[ 1.071545] 3720 eb09015f 54000161 a9427bfd a9414ff4 9100c3ff d65f03c0 d000b700 912fe000
1071[ 1.071550]
1072[ 1.071550] SP: 0xffffff8016823c20:
1073[ 1.071552] 3c20 0a943700 ffffff8b 60c00085 00000000 ffffffc8 ffffff80 8f427400 4d41b8f5
1074[ 1.071557] 3c40 ffffffff ffffffff 69233018 ffffffcf 16823c80 ffffff80 0a943700 ffffff8b
1075[ 1.071562] 3c60 00000000 00000000 8f427400 4d41b8f5 00000000 00000000 69233018 ffffffcf
1076[ 1.071568] 3c80 16823cb0 ffffff80 0b569864 ffffff8b 00000000 00000000 00000051 00000000
1077[ 1.071573]
1078[ 1.071575] Call trace:
1079[ 1.071577] enable_irq+0x90/0xe8
1080[ 1.071580] smblib_set_icl_current+0x17c/0x2b0
1081[ 1.071583] smb5_usb_main_set_prop+0x94/0xe8
1082[ 1.071588] power_supply_set_property+0x24/0x40
1083[ 1.071590] usb_icl_vote_callback+0x10c/0x200
1084[ 1.071593] rerun_election+0x6c/0x88
1085[ 1.071595] status_change_work+0xfc/0x6f8
1086[ 1.071599] process_one_work+0x1f4/0x458
1087[ 1.071601] worker_thread+0x2f0/0x458
1088[ 1.071604] kthread+0x110/0x120
1089[ 1.071607] ret_from_fork+0x10/0x18
1090[ 1.071609] ---[ end trace 4e4710ca502d4d41 ]---
1091[ 1.071851] pm8150b_charger: smblib_rerun_aicl: re-running AICL
1092[ 1.072238] icl_ua value is: 1500000
1093[ 1.072295] pm8150b_charger: smblib_rerun_aicl: re-running AICL
1094[ 1.072314] pm8150b_charger: smblib_set_prop_typec_power_role: set power_role to 0x10
1095[ 1.072316] pm8150b_charger: smblib_masked_write: set 0x1544 mask:0x1f,val:0x10
1096[ 1.072383] SMB5 status - usb:present=1 type=6 batt:present = 1 health = 1 charge = 3
1097[ 1.072385] QPNP SMB5 probed successfully
1098[ 1.072495] CP_DISABLE: current vote is now 1 voted by USER_VOTER,0, previous voted 0
1099[ 1.072553] PL_ENABLE_INDIRECT: current vote is now 1 voted by USBIN_I_VOTER,0, previous voted 0
1100[ 1.072566] CP_ILIM: current vote is now 2400000 voted by FCC_VOTER,0, previous voted -22
1101[ 1.072569] SMB1390: smb1390_ilim_vote_cb: setting ILIM to 2400000uA
1102[ 1.072724] CP_AWAKE: current vote is now 0 voted by CP_VOTER,0, previous voted 0
1103[ 1.072928] FG: fg_gen4_adjust_ki_coeff_full_soc: Wrote ki_coeff_full_soc [733 184]
1104[ 1.072942] FG: status_change_work: charge_status:1 charge_type:3 charge_done:0
1105[ 1.073114] pm8150b_charger: smblib_set_prop_system_temp_level: thermal level:0, batt temp:247, thermal_levels:16 chg->system_temp_level:0, charger_type:6
1106[ 1.073550] SMB1390: smb1390_probe: smb1390 probed successfully
1107[ 1.073862] i2c_geni 890000.i2c: i2c error :-107
1108[ 1.073963] pm8150b_charger: smblib_set_prop_system_temp_level: thermal level:0, batt temp:247, thermal_levels:16 chg->system_temp_level:0, charger_type:6
1109[ 1.074038] i2c_geni 890000.i2c: i2c error :-107
1110[ 1.074041] idtp9220 0-003b: vout regulator get vol: 0
1111[ 1.074805] FG: status_change_work: charge_status:1 charge_type:3 charge_done:0
1112[ 1.083341] coresight-tmc 6b09000.tmc: invalid cti data
1113[ 1.083728] tmc_etr_bam_init: setting SPS_BAM_SMMU_EN flag with (6048000.tmc)
1114[ 1.083805] sps:BAM 0x0000000006064000 is registered.
1115[ 1.084115] coresight-stm 6002000.stm: STM32 initialized with master Enabled
1116[ 1.084951] dwc3 a600000.dwc3: changing max_speed on rev 00000000
1117[ 1.085602] usb_bam_init: setting SPS_BAM_SMMU_EN flag with (a704000.qcom,usbbam)
1118[ 1.085666] sps:BAM 0x000000000a704000 is registered.
1119[ 1.085744] register_client_adhoc:find path.src 61 dest 512
1120[ 1.085860] register_client_adhoc:find path.src 61 dest 676
1121[ 1.085926] register_client_adhoc:find path.src 1 dest 583
1122[ 1.086001] register_client_adhoc:Client handle 58 usb0
1123[ 1.086190] msm-dwc3 a600000.ssusb: Not attached
1124[ 1.087371] usbpd usbpd0: failed to read pd vbus limit
1125[ 1.087413] usbpd usbpd0: Type-C Source (default) connected
1126[ 1.088244] dwc3 a600000.dwc3: changing max_speed on rev 00000000
1127[ 1.088867] usb_bam_init: setting SPS_BAM_SMMU_EN flag with (a704000.qcom,usbbam)
1128[ 1.088923] sps:BAM 0x000000000a704000 is registered.
1129[ 1.089003] register_client_adhoc:find path.src 61 dest 512
1130[ 1.089108] register_client_adhoc:find path.src 61 dest 676
1131[ 1.089172] register_client_adhoc:find path.src 1 dest 583
1132[ 1.089244] register_client_adhoc:Client handle 58 usb0
1133[ 1.089592] core_ctl: Creating CPU group 0
1134[ 1.089595] core_ctl: Init CPU0 state
1135[ 1.089597] core_ctl: Init CPU1 state
1136[ 1.089598] core_ctl: Init CPU2 state
1137[ 1.089600] core_ctl: Init CPU3 state
1138[ 1.089715] core_ctl: Creating CPU group 4
1139[ 1.089717] core_ctl: Init CPU4 state
1140[ 1.089719] core_ctl: Init CPU5 state
1141[ 1.089720] core_ctl: Init CPU6 state
1142[ 1.089784] core_ctl: Creating CPU group 7
1143[ 1.089786] core_ctl: Init CPU7 state
1144[ 1.089924] registered taskstats version 1
1145[ 1.089926] Loading compiled-in X.509 certificates
1146[ 1.090071] idtp9220 0-003b: usb present:1 typec mode:6
1147[ 1.090164] Get prop 42 is not supported in pc_port
1148[ 1.090218] get prop 42 is not supported in usb
1149[ 1.090529] i2c_geni 890000.i2c: i2c error :-107
1150[ 1.090668] i2c_geni 890000.i2c: i2c error :-107
1151[ 1.090670] idtp9220 0-003b: vout regulator get vol: 0
1152[ 1.090793] FG: status_change_work: charge_status:1 charge_type:3 charge_done:0
1153[ 1.090798] i2c_geni 890000.i2c: i2c error :-107
1154[ 1.090873] i2c_geni 890000.i2c: i2c error :-107
1155[ 1.090875] idtp9220 0-003b: vout regulator get vol: 0
1156[ 1.090962] pm8150b_charger: smblib_get_prop_typec_power_role: TYPE_C_MODE_CFG_REG = 0x10
1157[ 1.091143] write 0x84 to 0x70
1158[ 1.091150] write 0x2c to 0x74
1159[ 1.091155] Loaded X.509 cert 'Build time autogenerated kernel key: f6eb1722c85b09b78eb1dc3a9dbf17e029800a1a'
1160[ 1.091163] page_owner is disabled
1161[ 1.150770] msm-dwc3 a600000.ssusb: DWC3 exited from low power mode
1162[ 1.177011] spss_utils [spss_init]: spss-utils driver Ver 3.0 18-Feb-2018.
1163[ 1.177212] spss_utils [spss_probe]: Initialization completed ok, firmware_name [spss2p].
1164[ 1.179959] iommu: Adding device soc:qcom,msm_fastrpc:qcom,msm_fastrpc_compute_cb1 to group 38
1165[ 1.180347] iommu: Adding device soc:qcom,msm_fastrpc:qcom,msm_fastrpc_compute_cb4 to group 39
1166[ 1.180606] iommu: Adding device soc:qcom,msm_fastrpc:qcom,msm_fastrpc_compute_cb5 to group 40
1167[ 1.180868] iommu: Adding device soc:qcom,msm_fastrpc:qcom,msm_fastrpc_compute_cb6 to group 41
1168[ 1.181139] iommu: Adding device soc:qcom,msm_fastrpc:qcom,msm_fastrpc_compute_cb7 to group 42
1169[ 1.181389] iommu: Adding device soc:qcom,msm_fastrpc:qcom,msm_fastrpc_compute_cb8 to group 43
1170[ 1.181643] iommu: Adding device soc:qcom,msm_fastrpc:qcom,msm_fastrpc_compute_cb2 to group 44
1171[ 1.181901] iommu: Adding device soc:qcom,msm_fastrpc:qcom,msm_fastrpc_compute_cb3 to group 45
1172[ 1.182153] iommu: Adding device soc:qcom,msm_fastrpc:qcom,msm_fastrpc_compute_cb9 to group 46
1173[ 1.182841] iommu: Adding device soc:qcom,msm_fastrpc:qcom,msm_fastrpc_compute_cb10 to group 47
1174[ 1.183093] iommu: Adding device soc:qcom,msm_fastrpc:qcom,msm_fastrpc_compute_cb11 to group 48
1175[ 1.183344] iommu: Adding device soc:qcom,msm_fastrpc:qcom,msm_fastrpc_compute_cb12 to group 49
1176[ 1.183599] iommu: Adding device soc:qcom,msm_fastrpc:qcom,msm_fastrpc_compute_cb13 to group 50
1177[ 1.183855] iommu: Adding device soc:qcom,msm_fastrpc:qcom,msm_fastrpc_compute_cb14 to group 51
1178[ 1.184109] iommu: Adding device soc:qcom,msm_fastrpc:qcom,msm_fastrpc_compute_cb15 to group 52
1179[ 1.184669] [drm-dp] dp_display_init_aux_switch: cannot parse qcom,dp-aux-switch handle
1180[ 1.185017] register_client_adhoc:find path.src 1 dest 590
1181[ 1.185097] register_client_adhoc:Client handle 59 mdss_reg
1182[ 1.185108] register_client_adhoc:find path.src 22 dest 512
1183[ 1.185176] register_client_adhoc:find path.src 23 dest 512
1184[ 1.185237] register_client_adhoc:Client handle 60 mdss_sde
1185[ 1.185292] [drm:sde_dbg_init:5137] evtlog_status: enable:3, panic:0, dump:1
1186[ 1.185304] msm_drm ae00000.qcom,mdss_mdp: bound af20000.qcom,sde_rscc (ops sde_rsc_comp_ops)
1187[ 1.185309] msm_drm ae00000.qcom,mdss_mdp: bound soc:qcom,wb-display@0 (ops sde_wb_comp_ops)
1188[ 1.185314] msm_drm ae00000.qcom,mdss_mdp: bound ae90000.qcom,dp_display (ops dp_display_comp_ops)
1189[ 1.185416] msm-dsi-display:[dsi_display_bind] Successfully bind display panel 'dsi_samsung_fhd_ea8076_f1p2_cmd_display'
1190[ 1.185534] msm_drm ae00000.qcom,mdss_mdp: bound soc:qcom,dsi-display-primary (ops dsi_display_comp_ops)
1191[ 1.185537] msm_drm ae00000.qcom,mdss_mdp: bound soc:qcom,dsi-display-secondary (ops dsi_display_comp_ops)
1192[ 1.185549] [drm] mapped mdp address space @ffffff8017300000
1193[ 1.185577] msm_drm ae00000.qcom,mdss_mdp: failed to get memory resource: vbif_nrt_phys
1194[ 1.185599] [drm:_sde_kms_get_splash_data:3093] splash mem num_regions:1
1195[ 1.185604] [drm:_sde_kms_get_splash_data:3128] splash mem for disp:1 add:9c000000 size:2400000
1196[ 1.185993] [drm:sde_kms_hw_init:3254] sde hardware revision:0x50000001
1197[ 1.186397] [drm] Created domain mdp_ns [20000,fffe0000] secure=0
1198[ 1.187140] iommu: Adding device ae00000.qcom,mdss_mdp:qcom,smmu_sde_sec_cb to group 53
1199[ 1.187146] [drm] probing device qcom,smmu_sde_sec
1200[ 1.187149] [drm] Created domain mdp_s [20000,fffe0000] secure=1
1201[ 1.188884] [drm:sde_connector_init:2294] sde_connector_init: Request esd irq succeed!
1202[ 1.189031] [drm-dp] dp_parser_get_vreg: no supply entry present: ???
1203[ 1.189033] [drm-dp] dp_parser_get_vreg: no supply entry present: ???
1204[ 1.189035] [drm-dp] dp_parser_get_vreg: no supply entry present: ???
1205[ 1.189291] [drm-dp] dp_aux_get: invalid input
1206[ 1.189293] [drm-dp] dp_init_sub_modules: failed to initialize aux, rc = -19
1207[ 1.189298] [drm:sde_connector_init:2243] [sde error]post-init failed, -19
1208[ 1.189303] [drm-dp-mst]: dp_mst_drm_bridge_init: mst not initialized. cache encoder information
1209[ 1.189306] [drm-dp-mst]: dp_mst_drm_bridge_init: mst not initialized. cache encoder information
1210[ 1.190959] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
1211[ 1.190961] [drm] No driver support for vblank timestamp query.
1212[ 1.191354] [drm] Initialized msm_drm 1.2.0 20130625 for ae00000.qcom,mdss_mdp on minor 0
1213[ 1.191388] msm-dsi-panel:[dsi_panel_parse_topology:2746] default topology: lm: 1 comp_enc:0 intf: 1
1214[ 1.191470] msm-dsi-panel:[dsi_panel_parse_partial_update_caps:2836] partial update disabled as the property is not set
1215[ 1.191520] dsi-ctrl:[_dsi_ctrl_setup_isr] [DSI_0] IRQ 635 registered
1216[ 1.210678] sde_mdp_parse_dt_prop_len: <SDEROT_INFO> prop qcom,mdss-inline-rot-qos-lut : doesn't exist in device tree
1217[ 1.210682] sde_mdp_parse_dt_prop_len: <SDEROT_INFO> prop qcom,mdss-inline-rot-danger-lut : doesn't exist in device tree
1218[ 1.210685] sde_mdp_parse_dt_prop_len: <SDEROT_INFO> prop qcom,mdss-inline-rot-safe-lut : doesn't exist in device tree
1219[ 1.210706] register_client_adhoc:find path.src 1 dest 590
1220[ 1.210801] register_client_adhoc:Client handle 61 sde_reg
1221[ 1.210882] iommu: Adding device ae00000.qcom,mdss_rotator:qcom,smmu_rot_unsec_cb to group 54
1222[ 1.210893] sde_smmu_probe: <SDEROT_INFO> iommu v2 domain[0] mapping and clk register successful!
1223[ 1.210955] iommu: Adding device ae00000.qcom,mdss_rotator:qcom,smmu_rot_sec_cb to group 55
1224[ 1.210961] sde_smmu_probe: <SDEROT_INFO> iommu v2 domain[1] mapping and clk register successful!
1225[ 1.210994] register_client_adhoc:find path.src 25 dest 512
1226[ 1.211069] register_client_adhoc:Client handle 62 mdss_rotator
1227[ 1.211075] register_client_adhoc:find path.src 1 dest 590
1228[ 1.211150] register_client_adhoc:Client handle 63 mdss_rot_reg
1229[ 1.211344] No change in context(0==0), skip
1230[ 1.212144] sde_rotator_evtlog_create_debugfs: evtlog_status: enable:1, panic:0, dump:1
1231[ 1.213086] sde_rotator ae00000.qcom,mdss_rotator: <SDEROT_INFO> SDE v4l2 rotator probe success
1232[ 1.213407] iommu: Adding device 171c0000.slim:qcom,iommu_slim_ctrl_cb to group 56
1233[ 1.214050] iommu: Adding device 17240000.slim:qcom,iommu_slim_ctrl_cb to group 57
1234[ 1.215045] input: gpio-keys as /devices/platform/soc/soc:gpio_keys/input/input3
1235[ 1.215321] [ FTS ] fts_probe: driver ver: 5.2.4
1236[ 1.215328] [ FTS ] parse_dt:tp vendor: 72
1237[ 1.215329] [ FTS ] Unable to read tp color
1238[ 1.215332] [ FTS ] Unable to read tp hw version
1239[ 1.215334] [ FTS ] parse_dt:fw_name: st_fts_f1.ftb
1240[ 1.215334] [ FTS ] parse_dt:limit_name: stm_fts_production_limits.csv
1241[ 1.215337] fts 2-0049: fts+sdc
1242[ 1.225730] input: fts as /devices/platform/soc/c80000.i2c/i2c-2/2-0049/input/input4
1243[ 1.225749] [ FTS ] System resetting...
1244[ 1.247536] [ FTS ] System reset DONE!
1245[ 1.252813] [ FTS ] FW VER = 0034
1246[ 1.252815] [ FTS ] SVN REV = 1759
1247[ 1.252816] [ FTS ] CONFIG VER = 0013
1248[ 1.252818] [ FTS ] CONFIG PROJECT ID = 003E
1249[ 1.252820] [ FTS ] CX VER = FFFF
1250[ 1.252821] [ FTS ] CX PROJECT ID = 003E
1251[ 1.252823] [ FTS ] AFE VER: CFG = 03 - CX = 03 - PANEL = 03
1252[ 1.252827] [ FTS ] Release Info =
1253[ 1.265655] [ FTS ] Echo FOUND... OK!
1254[ 1.266552] [ FTS ] fts_get_lockdown_info signature:A5 id:70 70 beforecnt:1,aftercnt:2
1255[ 1.266557] [ FTS ] Lockdown:0x48,0x38,0x32,0x02,0x46,0x31,0x32,0x00
1256[ 1.266559] [ FTS ] FW Update and Sensing Initialization:
1257[ 1.266561] [ FTS ] Fw Auto Update is starting...
1258[ 1.266840] [ FTS ] fts_crc_check: Verifying if Config CRC Error...
1259[ 1.266842] [ FTS ] System resetting...
1260[ 1.288622] [ FTS ] System reset DONE!
1261[ 1.288624] [ FTS ] fts_crc_check: No Config CRC Error Found!
1262[ 1.288626] [ FTS ] fts_crc_check: Verifying if Cx CRC Error...
1263[ 1.288628] [ FTS ] fts_crc_check: No Cx CRC Error Found!
1264[ 1.288630] [ FTS ] fts_fw_update: NO CRC Error or Impossible to read CRC register!
1265[ 1.288632] [ FTS ] fts_get_lockdown_info aleady get,skip
1266[ 1.288634] [ FTS ] Choose config 0: st_fts_f1.ftb
1267[ 1.288637] [ FTS ] getFWdata starting ...
1268[ 1.288640] [ FTS ] Read FW from BIN file st_fts_f1.ftb !
1269[ 1.288662] [ FTS ] getFWdata Finished!
1270[ 1.288664] [ FTS ] parseBinFile: FILE SVN REV = 00001759
1271[ 1.288666] [ FTS ] parseBinFile: FILE Fw Version = 0034
1272[ 1.288668] [ FTS ] parseBinFile: FILE Config Project ID = 0000003E
1273[ 1.288670] [ FTS ] parseBinFile: FILE Config Version = 00000013
1274[ 1.288671] [ FTS ] parseBinFile: File External Release =
1275[ 1.288672] 13
1276[ 1.288674] F1
1277[ 1.288675] 00
1278[ 1.288677] 00
1279[ 1.288678] 00
1280[ 1.288679] 00
1281[ 1.288681] 00
1282[ 1.288682] 00
1283[ 1.288684]
1284[ 1.288687] [ FTS ] parseBinFile: sec0_size = 00019EA0 (106144 bytes)
1285[ 1.288689] [ FTS ] parseBinFile: sec1_size = 00000BA8 (2984 bytes)
1286[ 1.288690] [ FTS ] parseBinFile: sec2_size = 00000000 (0 bytes)
1287[ 1.288692] [ FTS ] parseBinFile: sec3_size = 00000000 (0 bytes)
1288[ 1.288711] [ FTS ] parseBinFile: Initialize cx_ver to default value!
1289[ 1.288713] [ FTS ] parseBinFile: CX Version = FFFF
1290[ 1.288717] [ FTS ] flash_burn: Firmware in the chip newer or equal to the one to burn! NO UPDATE ERROR 8000000C
1291[ 1.288720] [ FTS ] fts_fw_update: Verifying if CX CRC Error...
1292[ 1.288721] [ FTS ] System resetting...
1293[ 1.310498] [ FTS ] System reset DONE!
1294[ 1.310500] [ FTS ] fts_fw_update: No Cx CRC Error Found!
1295[ 1.310502] [ FTS ] fts_fw_update: Verifying if Panel CRC Error...
1296[ 1.310504] [ FTS ] fts_fw_update: No Panel CRC Error Found!
1297[ 1.310507] [ FTS ] Interrupt Mode
1298[ 1.310687] [ FTS ] fts_mode_handler: Screen ON...
1299[ 1.310690] [ FTS ] fts_mode_handler: Sense ON
1300[ 1.361137] [ FTS ] Fw Update Finished! error = 00000000
1301[ 1.361156] [ FTS ] fts_proc_init: proc entry CREATED!
1302[ 1.361159] touch is registered already
1303[ 1.361185] xiaomitouch_register_modedata
1304[ 1.361904] [ FTS ] fts_status_event_handler Mutual negative detect Force cal = 01 00 00 00 00 01
1305[ 1.362621] [ FTS ] fts_read_touchmode_data: game_mode:0, active_mode:0, up_threshold:80, landlock:35, wgh:1, 5, 1
1306[ 1.362624] [ FTS ] fts_read_touchmode_data: grip:0x0, 0xf, 0x0, 0x96, 0x96, 0x96, 0x96
1307[ 1.362626] [ FTS ] fts_init_touchmode_data: mode:0, set cur:0, get cur:0, def:0 min:0 max:1
1308[ 1.362628] [ FTS ] fts_init_touchmode_data: mode:1, set cur:0, get cur:0, def:0 min:0 max:1
1309[ 1.362630] [ FTS ] fts_init_touchmode_data: mode:2, set cur:80, get cur:80, def:80 min:20 max:99
1310[ 1.362632] [ FTS ] fts_init_touchmode_data: mode:3, set cur:20, get cur:20, def:20 min:0 max:34
1311[ 1.362635] [ FTS ] fts_init_touchmode_data: mode:4, set cur:1, get cur:1, def:1 min:0 max:15
1312[ 1.362637] [ FTS ] fts_init_touchmode_data: mode:5, set cur:5, get cur:5, def:5 min:0 max:15
1313[ 1.362639] [ FTS ] fts_init_touchmode_data: mode:6, set cur:1, get cur:1, def:1 min:0 max:2
1314[ 1.362641] [ FTS ] fts_init_touchmode_data: mode:7, set cur:2, get cur:2, def:2 min:0 max:3
1315[ 1.362643] [ FTS ] Probe Finished!
1316[ 1.362705] qcom,qpnp-rtc c440000.qcom,spmi:qcom,pm8150@0:qcom,pm8150_rtc: setting system clock to 1970-03-15 14:50:50 UTC (6360650)
1317[ 1.363718] lpm_levels: register_cluster_lpm_stats()
1318[ 1.363768] lpm_levels: register_cluster_lpm_stats()
1319[ 1.365530] rmnet_ipa3 started initialization
1320[ 1.365646] RNDIS_IPA module is loaded.
1321[ 1.366223] msm_bus_late_init: Remove handoff bw requests
1322[ 1.366824] hlos1_vote_aggre_noc_mmu_audio_tbu_gdsc: disabling
1323[ 1.366931] hlos1_vote_aggre_noc_mmu_tbu1_gdsc: disabling
1324[ 1.367038] hlos1_vote_aggre_noc_mmu_tbu2_gdsc: disabling
1325[ 1.367145] hlos1_vote_aggre_noc_mmu_pcie_tbu_gdsc: disabling
1326[ 1.367258] camera_viodd_ldo: disabling
1327[ 1.367260] actuator_rear_regulator: disabling
1328[ 1.367262] actuator_rear_aux_ldo: disabling
1329[ 1.367264] actuator_ultra_ldo: disabling
1330[ 1.368871] ext_5v_boost: disabling
1331[ 1.368894] regulator_proxy_consumer_remove_all: removing regulator proxy consumer requests
1332[ 1.368943] ALSA device list:
1333[ 1.368946] No soundcards found.
1334[ 1.368961] Warning: unable to open an initial console.
1335[ 1.369995] Freeing unused kernel memory: 6144K
1336[ 1.371095] init: init first stage started!
1337[ 1.371103] init: First stage mount skipped (recovery mode)
1338[ 1.371167] init: Using Android DT directory /proc/device-tree/firmware/android/
1339[ 1.371346] init: [libfs_mgr]dt_fstab: Skip disabled entry for partition ifaa
1340[ 1.371446] init: [libfs_mgr]Warning: unknown flag wrappedkey
1341[ 1.371518] init: [libfs_mgr]dt_fstab: Skip disabled entry for partition ifaa
1342[ 1.377277] i2c_geni 890000.i2c: i2c error :-107
1343[ 1.377357] i2c_geni 890000.i2c: i2c error :-107
1344[ 1.377360] idtp9220 0-003b: vout regulator get vol: 34560
1345[ 1.384019] [ FTS ] fts_status_event_handler Mutual negative detect Force cal = 01 00 00 00 00 01
1346[ 1.388807] init: [libfs_mgr]Returning avb_handle with status: 0
1347[ 1.388869] init: Loading SELinux policy
1348[ 1.390246] SELinux: 8192 avtab hash slots, 16621 rules.
1349[ 1.391854] SELinux: 8192 avtab hash slots, 16621 rules.
1350[ 1.391857] SELinux: 1 users, 2 roles, 1327 types, 0 bools, 1 sens, 1024 cats
1351[ 1.391859] SELinux: 93 classes, 16621 rules
1352[ 1.392321] SELinux: Class process2 not defined in policy.
1353[ 1.392419] SELinux: Class infiniband_pkey not defined in policy.
1354[ 1.392421] SELinux: Class infiniband_endport not defined in policy.
1355[ 1.392424] SELinux: the above unknown classes and permissions will be denied
1356[ 1.392428] SELinux: policy capability network_peer_controls=1
1357[ 1.392430] SELinux: policy capability open_perms=1
1358[ 1.392431] SELinux: policy capability extended_socket_class=1
1359[ 1.392433] SELinux: policy capability always_check_network=0
1360[ 1.392435] SELinux: policy capability cgroup_seclabel=0
1361[ 1.392436] SELinux: policy capability nnp_nosuid_transition=0
1362[ 1.392445] SELinux: Completing initialization.
1363[ 1.392446] SELinux: Setting up existing superblocks.
1364[ 1.414658] audit: type=1403 audit(6360650.539:2): policy loaded auid=4294967295 ses=4294967295
1365[ 1.414725] selinux: SELinux: Loaded policy from /sepolicy
1366[ 1.414725]
1367[ 1.415427] selinux: SELinux: Loaded file_contexts
1368[ 1.415427]
1369[ 1.416380] init: init second stage started!
1370[ 1.418286] init: Using Android DT directory /proc/device-tree/firmware/android/
1371[ 1.418974] selinux: SELinux: Loaded file_contexts
1372[ 1.418974]
1373[ 1.418979] init: Running restorecon...
1374[ 1.420535] init: waitid failed: No child processes
1375[ 1.420549] init: Couldn't load property file '/system/etc/prop.default': open() failed: No such file or directory: No such file or directory
1376[ 1.420778] init: Couldn't load property file '/product/build.prop': open() failed: No such file or directory: No such file or directory
1377[ 1.420785] init: Couldn't load property file '/odm/default.prop': open() failed: No such file or directory: No such file or directory
1378[ 1.420791] init: Couldn't load property file '/vendor/default.prop': open() failed: No such file or directory: No such file or directory
1379[ 1.420889] init: Created socket '/dev/socket/property_service', mode 666, user 0, group 0
1380[ 1.421888] audit: type=1400 audit(6360650.549:3): avc: denied { setcheckreqprot } for pid=1 comm="init" scontext=u:r:init:s0 tcontext=u:object_r:kernel:s0 tclass=security permissive=1
1381[ 1.422037] audit: type=1400 audit(6360650.549:4): avc: denied { dac_read_search } for pid=1 comm="init" capability=2 scontext=u:r:init:s0 tcontext=u:r:init:s0 tclass=capability permissive=1
1382[ 1.422044] audit: type=1400 audit(6360650.549:5): avc: denied { create } for pid=1 comm="init" name="cgroup.procs" scontext=u:r:init:s0 tcontext=u:object_r:rootfs:s0 tclass=file permissive=1
1383[ 1.422050] audit: type=1400 audit(6360650.549:6): avc: denied { write } for pid=1 comm="init" path="/acct/uid_0/pid_528/cgroup.procs" dev="rootfs" ino=16100 scontext=u:r:init:s0 tcontext=u:object_r:rootfs:s0 tclass=file permissive=1
1384[ 1.424296] ueventd: ueventd started!
1385[ 1.425104] audit: type=1400 audit(6360650.549:7): avc: denied { map } for pid=527 comm="init" path="/plat_file_contexts" dev="rootfs" ino=5898 scontext=u:r:vendor_init:s0 tcontext=u:object_r:file_contexts_file:s0 tclass=file permissive=1
1386[ 1.425849] selinux: SELinux: Loaded file_contexts
1387[ 1.425849]
1388[ 1.425895] ueventd: Parsing file /ueventd.rc...
1389[ 1.426320] ueventd: Parsing file /vendor/ueventd.rc...
1390[ 1.426346] ueventd: Unable to read config file '/vendor/ueventd.rc': open() failed: No such file or directory
1391[ 1.426364] ueventd: Parsing file /odm/ueventd.rc...
1392[ 1.426385] ueventd: Unable to read config file '/odm/ueventd.rc': open() failed: No such file or directory
1393[ 1.426438] ueventd: Parsing file /ueventd.qcom.rc...
1394[ 1.427962] ueventd: [libfs_mgr]Warning: unknown flag wrappedkey
1395[ 1.428317] ueventd: [libfs_mgr]dt_fstab: Skip disabled entry for partition ifaa
1396[ 1.448788] i2c_geni 890000.i2c: i2c error :-107
1397[ 1.448881] i2c_geni 890000.i2c: i2c error :-107
1398[ 1.448888] idtp9220 0-003b: vout regulator get vol: 57856
1399[ 1.489179] i2c_geni 890000.i2c: i2c error :-107
1400[ 1.489262] i2c_geni 890000.i2c: i2c error :-107
1401[ 1.489266] idtp9220 0-003b: vout regulator get vol: 0
1402[ 1.489345] i2c_geni 890000.i2c: i2c error :-107
1403[ 1.489422] i2c_geni 890000.i2c: i2c error :-107
1404[ 1.489424] idtp9220 0-003b: vout regulator get vol: 0
1405[ 1.491158] i2c_geni 890000.i2c: i2c error :-107
1406[ 1.491236] i2c_geni 890000.i2c: i2c error :-107
1407[ 1.491238] idtp9220 0-003b: vout regulator get vol: 0
1408[ 1.491986] pm8150b_charger: smblib_get_prop_typec_power_role: TYPE_C_MODE_CFG_REG = 0x10
1409[ 1.547491] audit: type=1400 audit(6360650.669:8): avc: denied { create } for pid=1 comm="init" name="bin" scontext=u:r:init:s0 tcontext=u:object_r:system_file:s0 tclass=dir permissive=1
1410[ 1.547835] audit: type=1400 audit(6360650.669:9): avc: denied { create } for pid=1 comm="init" name="sh" scontext=u:r:init:s0 tcontext=u:object_r:shell_exec:s0 tclass=lnk_file permissive=1
1411[ 1.548016] audit: type=1400 audit(6360650.669:10): avc: denied { create } for pid=1 comm="init" name="manifest.xml" scontext=u:r:init:s0 tcontext=u:object_r:system_file:s0 tclass=lnk_file permissive=1
1412[ 1.559391] Mass Storage Function, version: 2009/09/11
1413[ 1.559407] LUN: removable file: (no medium)
1414[ 1.560729] file system registered
1415[ 1.561510] f_cdev_alloc: port_name:at_usb0 (0000000000000000) portno:(0)
1416[ 1.562430] logd: failed to set AID_LOGD uid
1417[ 1.562490] logd: Cannot read /system/etc/event-log-tags
1418[ 1.562507] f_cdev_alloc: port_name:at_usb1 (0000000000000000) portno:(1)
1419[ 1.562564] cser_set_inst_name: Failed to create cdev port(2)
1420[ 1.563047] logd.auditd: start
1421[ 1.563067] logd.klogd: 1563051249
1422[ 1.580634] backlight: backlight_device_set_brightness: set brightness to 1200
1423[ 1.586533] type=1400 audit(6360650.699:20): avc: denied { read } for pid=559 comm="qseecomd" name="sg8" dev="tmpfs" ino=19491 scontext=u:r:recovery:s0 tcontext=u:object_r:device:s0 tclass=chr_file permissive=1
1424[ 1.586624] type=1400 audit(6360650.699:20): avc: denied { read } for pid=559 comm="qseecomd" name="sg8" dev="tmpfs" ino=19491 scontext=u:r:recovery:s0 tcontext=u:object_r:device:s0 tclass=chr_file permissive=1
1425[ 1.586629] type=1400 audit(6360650.699:21): avc: denied { open } for pid=559 comm="qseecomd" path="/dev/sg8" dev="tmpfs" ino=19491 scontext=u:r:recovery:s0 tcontext=u:object_r:device:s0 tclass=chr_file permissive=1
1426[ 1.586648] type=1400 audit(6360650.699:21): avc: denied { open } for pid=559 comm="qseecomd" path="/dev/sg8" dev="tmpfs" ino=19491 scontext=u:r:recovery:s0 tcontext=u:object_r:device:s0 tclass=chr_file permissive=1
1427[ 1.586652] type=1400 audit(6360650.699:22): avc: denied { ioctl } for pid=559 comm="qseecomd" path="/dev/sg8" dev="tmpfs" ino=19491 ioctlcmd=0x5382 scontext=u:r:recovery:s0 tcontext=u:object_r:device:s0 tclass=chr_file permissive=1
1428[ 1.586668] type=1400 audit(6360650.699:22): avc: denied { ioctl } for pid=559 comm="qseecomd" path="/dev/sg8" dev="tmpfs" ino=19491 ioctlcmd=0x5382 scontext=u:r:recovery:s0 tcontext=u:object_r:device:s0 tclass=chr_file permissive=1
1429[ 1.588011] pm8150b_charger: smblib_masked_write: set 0x1544 mask:0x7,val:0x0
1430[ 1.588566] pm8150b_charger: smblib_masked_write: set 0x1544 mask:0x7,val:0x0
1431[ 1.596245] [ FTS ] fts_drm_state_chg_callback: val:1,blank:0
1432[ 1.597875] msm-dsi-display:[dsi_display_read_panel] 0x91
1433[ 1.597878] msm-dsi-display:[dsi_display_read_panel]
1434[ 1.597888] msm-dsi-display:[dsi_display_enable] elvss dimming read result 91
1435[ 1.597894] msm-dsi-display:[dsi_display_enable] fod hbm on change to 11
1436[ 1.597898] msm-dsi-display:[dsi_display_enable] fod hbm off change to 91
1437[ 1.597904] thermal_sys: screen_state_for_thermal_callback: DRM_BLANK_UNBLANK
1438[ 1.597923] [ FTS ] fts_drm_state_chg_callback: val:2,blank:0
1439[ 1.679314] sem:ffffffcf6f263800 task:ffffffcf6916cf00 op:0 time: 1.679301983 index:1 sem->count:2
1440[ 1.679326] sem:ffffffcf6f263800 task:ffffffcf6916cf00 op:0 time: 1.679320733 index:2 sem->count:2
1441[ 1.679333] sem:ffffffcf6f263800 task:ffffffcf6916cf00 op:0 time: 1.679320733 index:2 sem->count:2
1442[ 1.679339] sem:ffffffcf6f263800 task:ffffffcf6916cf00 op:0 time: 1.679320733 index:2 sem->count:2
1443[ 1.679345] sem:ffffffcf6f263800 task:ffffffcf6916cf00 op:0 time: 1.679320733 index:2 sem->count:2
1444[ 1.680948] EXT4-fs (sda29): recovery complete
1445[ 1.681280] EXT4-fs (sda29): mounted filesystem with ordered data mode. Opts: barrier=1,data=ordered
1446[ 1.750919] FG: status_change_work: charge_status:1 charge_type:4 charge_done:0
1447[ 1.830045] msm-dsi-panel:[panel_disp_param_send_lock:4495] dimmingon
1448[ 2.034994] EXT4-fs (sda32): recovery complete
1449[ 2.035384] EXT4-fs (sda32): mounted filesystem with ordered data mode. Opts: barrier=1,data=ordered,noauto_da_alloc
1450[ 2.057594] EXT4-fs (sda32): errors=remount-ro for active namespaces on umount 0
1451[ 2.080257] FG: fg_battery_soc_smooth_tracking: soc:100, last_soc:100, raw_soc:100, soc_changed:0.
1452[ 2.080263] FG: soc_monitor_work: soc:100, raw_soc:100, c:-412109, s:1
1453[ 2.080980] FG: status_change_work: charge_status:1 charge_type:4 charge_done:0
1454[ 2.084562] EXT4-fs (sda32): mounted filesystem with ordered data mode. Opts: barrier=1,data=ordered,noauto_da_alloc
1455[ 2.773936] pm8150b_charger: smblib_masked_write: set 0x1544 mask:0x7,val:0x0
1456[ 2.774460] pm8150b_charger: smblib_masked_write: set 0x1544 mask:0x7,val:0x0
1457[ 3.120066] of_batterydata_get_best_profile: f1_atl found
1458[ 3.120075] QCOM-STEPCHG: get_config_work: jeita-fcc-cfg: 0decidegree ~ 50decidegre, 300000uA
1459[ 3.120078] QCOM-STEPCHG: get_config_work: jeita-fcc-cfg: 51decidegree ~ 100decidegre, 1600000uA
1460[ 3.120080] QCOM-STEPCHG: get_config_work: jeita-fcc-cfg: 101decidegree ~ 150decidegre, 3200000uA
1461[ 3.120082] QCOM-STEPCHG: get_config_work: jeita-fcc-cfg: 151decidegree ~ 450decidegre, 4800000uA
1462[ 3.120084] QCOM-STEPCHG: get_config_work: jeita-fcc-cfg: 451decidegree ~ 580decidegre, 1600000uA
1463[ 3.120087] QCOM-STEPCHG: get_config_work: jeita-fv-cfg: 0decidegree ~ 50decidegre, 4400000uV
1464[ 3.120089] QCOM-STEPCHG: get_config_work: jeita-fv-cfg: 51decidegree ~ 100decidegre, 4400000uV
1465[ 3.120091] QCOM-STEPCHG: get_config_work: jeita-fv-cfg: 101decidegree ~ 150decidegre, 4400000uV
1466[ 3.120094] QCOM-STEPCHG: get_config_work: jeita-fv-cfg: 151decidegree ~ 450decidegre, 4400000uV
1467[ 3.120096] QCOM-STEPCHG: get_config_work: jeita-fv-cfg: 451decidegree ~ 580decidegre, 4100000uV
1468[ 3.959798] pm8150b_charger: smblib_masked_write: set 0x1544 mask:0x7,val:0x0
1469[ 3.960291] pm8150b_charger: smblib_masked_write: set 0x1544 mask:0x7,val:0x0
1470[ 4.080033] idtp9220 0-003b: [idt] enter idtp9220_chg_detect_work
1471[ 4.080063] idtp9220 0-003b: [idt] usb_online:1 set chip disable
1472[ 4.080084] PL_AWAKE: current vote is now 1 voted by TAPER_END_VOTER,0, previous voted 0
1473[ 4.080141] PL_AWAKE: current vote is now 0 voted by TAPER_END_VOTER,0, previous voted 1
1474[ 5.145613] pm8150b_charger: smblib_masked_write: set 0x1544 mask:0x7,val:0x0
1475[ 5.145705] USB_IRQ_DISABLE: current vote is now 0 voted by PD_VOTER,0, previous voted 0
1476[ 5.145754] pm8150b_charger: smblib_update_usb_type: APSD=CDP PD=0
1477[ 5.145797] get prop 42 is not supported in usb
1478[ 5.145814] usbpd usbpd0: typec mode:6 type:6
1479[ 5.146410] FG: status_change_work: charge_status:1 charge_type:4 charge_done:0
1480[ 5.146669] pm8150b_charger: smblib_get_prop_typec_power_role: TYPE_C_MODE_CFG_REG = 0x10
1481[ 5.811211] [ FTS ] fts_status_event_handler SS invalid Self Strength soft Force cal = 21 00 00 00 00 00
1482[ 6.143718] FG: fg_delta_esr_irq_handler: irq 563 triggered esr_uohms: 148437
1483[ 6.144179] FG: esr_calib_work: esr_raw: 0x179 esr_char_raw: 0x136 esr_meas_diff: 0x43 esr_delta: 0x80
1484[ 6.144186] FG: esr_calib_work: fg_esr_meas_diff: 0x3d esr_filt: 0xf esr_delta_new: 0x71
1485[ 6.144481] FG: esr_calib_work: Wrote ESR delta [0x71 0x0]
1486[ 6.571727] init: starting service 'adbd'...
1487[ 6.572679] init: Created socket '/dev/socket/adbd', mode 660, user 1000, group 1000
1488[ 6.576008] read descriptors
1489[ 6.576081] read strings
1490[ 6.576444] init: processing action (sys.usb.config=adb && sys.usb.ffs.ready=1) from (/init.recovery.usb.rc:95)
1491[ 6.773319] android_work: sent uevent USB_STATE=CONNECTED
1492[ 6.891305] configfs-gadget gadget: high-speed config #1: b
1493[ 6.891437] android_work: sent uevent USB_STATE=CONFIGURED
1494[ 10.155598] [ FTS ] fts_leave_pointer_event_handler : Event 0x33 - release ID[0] type = 1
1495[ 10.570408] [ FTS ] fts_leave_pointer_event_handler : Event 0x33 - release ID[0] type = 1
1496[ 12.640250] FG: fg_battery_soc_smooth_tracking: soc:100, last_soc:100, raw_soc:100, soc_changed:0.
1497[ 12.640253] FG: soc_monitor_work: soc:100, raw_soc:100, c:-362792, s:1
1498[ 15.147261] FG: fg_delta_esr_irq_handler: irq 563 triggered esr_uohms: 157226
1499[ 15.147716] FG: esr_calib_work: esr_raw: 0x19d esr_char_raw: 0x136 esr_meas_diff: 0x67 esr_delta: 0x71
1500[ 15.147723] FG: esr_calib_work: fg_esr_meas_diff: 0xa esr_filt: 0x2 esr_delta_new: 0x6f
1501[ 15.148018] FG: esr_calib_work: Wrote ESR delta [0x6f 0x0]
1502[ 16.480050] QNOVO_CHG_READY: current vote is now 1 voted by USB_READY_VOTER,0, previous voted 0
1503[ 16.480054] QNOVO_NOT_OK: current vote is now 0 voted by CHG_READY_VOTER,0, previous voted 1
1504[ 16.480095] QNOVO_AWAKE: current vote is now 0 voted by USB_READY_VOTER,0, previous voted 1
1505[ 21.600533] FG: soc_work_fn: adjust_soc: s 100 r 157226 i -341 v 4408 t 250 cc 3 m 0xff
1506[ 21.601254] FG: status_change_work: charge_status:1 charge_type:4 charge_done:0
1507[ 22.880242] FG: fg_battery_soc_smooth_tracking: soc:100, last_soc:100, raw_soc:100, soc_changed:0.
1508[ 22.880246] FG: soc_monitor_work: soc:100, raw_soc:100, c:-340820, s:1
1509[ 24.143393] FG: fg_delta_esr_irq_handler: irq 563 triggered esr_uohms: 172362
1510[ 24.143849] FG: esr_calib_work: esr_raw: 0x1d9 esr_char_raw: 0x136 esr_meas_diff: 0xa3 esr_delta: 0x6f
1511[ 24.143856] FG: esr_calib_work: fg_esr_meas_diff: 0xffffffcc esr_filt: 0xfffffff3 esr_delta_new: 0x7c
1512[ 24.144146] FG: esr_calib_work: Wrote ESR delta [0x7c 0x0]
1513
1514C:\adb>adb shell cat /tmp/recovery.log
1515Starting TWRP 3.2.3-2-25292301 on Sun Mar 15 14:50:50 1970
1516 (pid 543)
1517BOARD_HAS_NO_REAL_SDCARD := true
1518RECOVERY_SDCARD_ON_DATA := true
1519I:Lun file '/sys/class/android_usb/android0/f_mass_storage/lun0/file' does not exist, USB storage mode disabled
1520TW_INCLUDE_CRYPTO := true
1521I:TW_BRIGHTNESS_PATH := /sys/class/backlight/panel0-backlight/brightness
1522I:Found brightness file at '/sys/class/backlight/panel0-backlight/brightness'
1523I:TWFunc::Set_Brightness: Setting brightness control to 1200
1524I:LANG: en
1525Starting the UI...
1526setting DRM_FORMAT_BGRA8888 and GGL_PIXEL_FORMAT_BGRA_8888
1527setting DRM_FORMAT_ARGB8888 and GGL_PIXEL_FORMAT_RGBA_8888
1528setting DRM_FORMAT_ARGB8888 and GGL_PIXEL_FORMAT_RGBA_8888
1529Using drm graphics.
1530I:TWFunc::Set_Brightness: Setting brightness control to 1200
1531I:Loading package: splash (/twres/splash.xml)
1532I:Load XML directly
1533I:PageManager::LoadFileToBuffer loading filename: '/twres/splash.xml' directly
1534I:Checking resolution...
1535I:Scaling theme width 1.000000x and height 1.218750x, offsets x: 0 y: 0 w: 0 h: 0
1536I:Loading resources...
1537I:Loading variables...
1538I:Loading mouse cursor...
1539I:Loading pages...
1540I:Loading page splash
1541I:Switching packages (splash)
1542=> Linking mtab
1543=> Processing /etc/recovery.fstab
1544I:Reading /etc/recovery.fstab
1545I:Processing '/'
1546I:Unhandled flag: 'avb'
1547I:Processing '/metadata'
1548I:Processing '/cust'
1549I:Created '/cust' folder.
1550I:Processing '/vendor'
1551I:Unhandled flag: 'avb'
1552I:Processing '/cache'
1553I:Processing '/data'
1554I:Unhandled flag: 'latemount'
1555I:FBE contents 'ice', filenames ''
1556I:Unhandled flag: 'wrappedkey'
1557I:Flag identified for processing, but later unmatched: 36
1558I:Processing '/sdcard'
1559I:Processing '/boot'
1560I:Processing '/recovery'
1561I:Processing '/misc'
1562I:Done processing fstab files
1563I:Setting up '/data' as data/media emulated storage.
1564I:mount -o bind '/data/media' '/sdcard' process ended with RC=0
1565I:mount -o bind '/data/media/0' '/sdcard' process ended with RC=0
1566I:File Based Encryption is present
1567e4crypt_initialize_global_de
1568calling retrieveAndInstallKey
1569Key exists, using: /data/unencrypted/key