xZZ36HeD

1NOTICE:  BL2: v1.5(release):LSDK-19.09
2NOTICE:  BL2: Built : 14:12:59, Feb 11 2020
3NOTICE:  UDIMM 8ATF1G64HZ-3G2J1
4ERROR:   cal_ddr_addr_dec ba_intlv 0x0
5NOTICE:  DDR4 UDIMM with 1-rank 64-bit bus (x8)
6
7NOTICE:  16 GB DDR4, 64-bit, CL=22, ECC off, 256B
8NOTICE:  BL2: Booting BL31
9NOTICE:  BL31: v1.5(release):LSDK-19.09
10NOTICE:  BL31: Built : 14:13:04, Feb 11 2020
11NOTICE:  Welcome to LX2160 BL31 Phase
12
13
14U-Boot 2019.04-dirty (Feb 11 2020 - 14:12:49 +0100)
15
16SoC:  unknown (0x87361010)
17Clock Configuration:
18       CPU0(A72):2000 MHz  CPU1(A72):2000 MHz  CPU2(A72):2000 MHz
19       CPU3(A72):2000 MHz  CPU4(A72):2000 MHz  CPU5(A72):2000 MHz
20       CPU6(A72):2000 MHz  CPU7(A72):2000 MHz  CPU8(A72):2000 MHz
21       CPU9(A72):2000 MHz  CPU10(A72):2000 MHz  CPU11(A72):2000 MHz
22       CPU12(A72):2000 MHz  CPU13(A72):2000 MHz  CPU14(A72):2000 MHz
23       CPU15(A72):2000 MHz
24       Bus:      700  MHz  DDR:      3200 MT/s
25Reset Configuration Word (RCW):
26       00000000: 50838338 24500050 00000000 00000000
27       00000010: 00000000 0e010000 00000000 00000000
28       00000020: 026001a0 00002580 00000000 08000081
29       00000030: 09240000 00000001 00000000 00000000
30       00000040: 00000000 00000000 00000000 00000000
31       00000050: 00000000 00000000 00000000 00000000
32       00000060: 00000000 00000000 00027000 00000000
33       00000070: 08a80001 00151020
34Model: SolidRun LX2160ACEX7 COM express type 7 based board
35Board: unknown-CEX7, SD
36SERDES1 Reference: Clock1 = 161.13MHz Clock2 = 100MHz
37SERDES2 Reference: Clock1 = 100MHz Clock2 = 100MHz
38SERDES3 Reference: Clock1 = 100MHz Clock2 = 100Hz
39DRAM:  15.9 GiB
40DDR    15.9 GiB (DDR4, 64-bit, CL=22, ECC off)
41       DDR Controller Interleaving Mode: 256B
42Using SERDES1 Protocol: 8 (0x8)
43Using SERDES2 Protocol: 5 (0x5)
44Using SERDES3 Protocol: 2 (0x2)
45MMC:   FSL_SDHC: 0, FSL_SDHC: 1
46Loading Environment from MMC... *** Warning - bad CRC, using default environment
47
48In:    serial_pl01x
49Out:   serial_pl01x
50Err:   serial_pl01x
51Net:   PCIe0: pcie@3400000 disabled
52PCIe1: pcie@3500000 disabled
53PCIe2: pcie@3600000 Root Complex: x4 gen3
54PCIe3: pcie@3700000 disabled
55PCIe4: pcie@3800000 Root Complex: x8 gen2
56PCIe5: pcie@3900000 disabled
57DPMAC3@xgmii
58Warning: DPMAC3@xgmii (eth0) using random MAC address - e6:7f:52:d3:10:10
59, DPMAC4@xgmii
60Warning: DPMAC4@xgmii (eth1) using random MAC address - be:82:07:cf:ab:81
61, DPMAC5@xgmii
62Warning: DPMAC5@xgmii (eth2) using random MAC address - b6:8a:2e:b5:27:8d
63, DPMAC6@xgmii
64Warning: DPMAC6@xgmii (eth3) using random MAC address - 8e:d1:d3:15:ce:85
65, DPMAC7@xgmii
66Warning: DPMAC7@xgmii (eth4) using random MAC address - 86:d9:fa:6f:42:89
67, DPMAC8@xgmii
68Warning: DPMAC8@xgmii (eth5) using random MAC address - 1a:68:f7:ba:1f:dc
69, DPMAC9@xgmii
70Warning: DPMAC9@xgmii (eth6) using random MAC address - 32:61:1b:8f:42:00
71, DPMAC10@xgmii
72Warning: DPMAC10@xgmii (eth7) using random MAC address - 0a:3a:e6:2f:ab:08
73, DPMAC17@rgmii-id [PRIME]
74Warning: DPMAC17@rgmii-id (eth8) using random MAC address - 22:33:0a:1a:f6:d4
75
76
77MMC read: dev # 0, block # 20480, count 4608 ... 4608 blocks read: OK
78
79MMC read: dev # 0, block # 28672, count 2048 ... 2048 blocks read: OK
80crc32+
81fsl-mc: Booting Management Complex ... SUCCESS
82fsl-mc: Management Complex booted (version: 10.18.0, boot status: 0x1)
83Hit any key to stop autoboot:  0
84Device: FSL_SDHC
85Manufacturer ID: 2
86OEM: 544d
87Name: SA04G
88Bus Speed: 50000000
89Mode : SD High Speed (50MHz)
90Rd Block Len: 512
91SD version 3.0
92High Capacity: Yes
93Capacity: 3.6 GiB
94Bus Width: 4-bit
95Erase Group Size: 512 Bytes
96
97MMC read: dev # 0, block # 26624, count 2048 ... 2048 blocks read: OK
98starting USB...
99USB0:   Register 200017f NbrPorts 2
100Starting the controller
101USB XHCI 1.00
102USB1:   Register 200017f NbrPorts 2
103Starting the controller
104USB XHCI 1.00
105scanning bus 0 for devices... 1 USB Device(s) found
106scanning bus 1 for devices... 4 USB Device(s) found
107       scanning usb for storage devices... 0 Storage Device(s) found
108
109Device 0: unknown device
110switch to partitions #0, OK
111mmc0 is current device
112** No partition table - mmc 0 **
113switch to partitions #0, OK
114mmc1(part 0) is current device
115** No partition table - mmc 1 **
116scanning bus for devices...
117SATA link 0 timeout.
118AHCI 0001.0301 32 slots 1 ports 6 Gbps 0x1 impl SATA mode
119flags: 64bit ncq pm clo only pmp fbss pio slum part ccc apst
120SATA link 0 timeout.
121AHCI 0001.0301 32 slots 1 ports 6 Gbps 0x1 impl SATA mode
122flags: 64bit ncq pm clo only pmp fbss pio slum part ccc apst
123SATA link 0 timeout.
124AHCI 0001.0301 32 slots 1 ports 6 Gbps 0x1 impl SATA mode
125flags: 64bit ncq pm clo only pmp fbss pio slum part ccc apst
126SATA link 0 timeout.
127AHCI 0001.0301 32 slots 1 ports 6 Gbps 0x1 impl SATA mode
128flags: 64bit ncq pm clo only pmp fbss pio slum part ccc apst
129
130Device 0: unknown device
131
132Device 0: Vendor: 0x126f Rev: S0905C0  Prod: F250520471
133            Type: Hard Disk
134            Capacity: 122104.3 MB = 119.2 GB (250069680 x 512)
135... is now current device
136Scanning nvme 0:1...
137Found /extlinux/extlinux.conf
138Retrieving file: /extlinux/extlinux.conf
139878 bytes read in 1 ms (857.4 KiB/s)
140linux-lx2160a boot options
1411:	mainline kernel
1422:	lsdk-19.09
1433:	original kernel
144Enter choice: 1:	mainline kernel
145Retrieving file: /boot/Image
14626225152 bytes read in 32 ms (781.6 MiB/s)
147append: console=ttyAMA0,115200 earlycon=pl011,mmio32,0x21c0000 pci=pcie_bus_perf root=PARTUUID=30303030-01 rw rootwait arm-smmu.disable_bypass=0
148Retrieving file: /boot/fsl-lx2160a-clearfog-cx.dtb
14925360 bytes read in 0 ms
150## Flattened Device Tree blob at 90000000
151   Booting using the fdt blob at 0x90000000
152   Loading Device Tree to 000000009fff6000, end 000000009ffff30f ... OK
153fsl-mc: Deploying data path layout ... WARNING: Firmware returned an error (GSR: 0x3f)
154
155Starting kernel ...
156
157[    0.000000] Booting Linux on physical CPU 0x0000000000 [0x410fd083]
158[    0.000000] Linux version 5.5.0-00702-gff4a3bb99622 (dmarion@clearfog) (gcc version 9.2.1 20191008 (Ubuntu 9.2.1-9ubuntu2)) #15 SMP PREEMPT Thu Feb 13 11:47:51 CET 2020
159[    0.000000] Machine model: SolidRun LX2160A Clearfog CX
160[    0.000000] earlycon: pl11 at MMIO32 0x00000000021c0000 (options '')
161[    0.000000] printk: bootconsole [pl11] enabled
162[    0.000000] efi: Getting EFI parameters from FDT:
163[    0.000000] efi: UEFI not found.
164[    0.000000] NUMA: No NUMA configuration found
165[    0.000000] NUMA: Faking a node at [mem 0x0000000080000000-0x000000237fffffff]
166[    0.000000] NUMA: NODE_DATA [mem 0x237e3f3400-0x237e3f4fff]
167[    0.000000] Zone ranges:
168[    0.000000]   DMA      [mem 0x0000000080000000-0x00000000bfffffff]
169[    0.000000]   DMA32    [mem 0x00000000c0000000-0x00000000ffffffff]
170[    0.000000]   Normal   [mem 0x0000000100000000-0x000000237fffffff]
171[    0.000000] Movable zone start for each node
172[    0.000000] Early memory node ranges
173[    0.000000]   node   0: [mem 0x0000000080000000-0x00000000fbdfffff]
174[    0.000000]   node   0: [mem 0x0000002080000000-0x000000237fffffff]
175[    0.000000] Initmem setup node 0 [mem 0x0000000080000000-0x000000237fffffff]
176[    0.000000] psci: probing for conduit method from DT.
177[    0.000000] psci: PSCIv1.1 detected in firmware.
178[    0.000000] psci: Using standard PSCI v0.2 function IDs
179[    0.000000] psci: MIGRATE_INFO_TYPE not supported.
180[    0.000000] psci: SMC Calling Convention v1.1
181[    0.000000] percpu: Embedded 23 pages/cpu s53528 r8192 d32488 u94208
182[    0.000000] Detected PIPT I-cache on CPU0
183[    0.000000] CPU features: detected: GIC system register CPU interface
184[    0.000000] CPU features: detected: EL2 vector hardening
185[    0.000000] CPU features: kernel page table isolation forced ON by KASLR
186[    0.000000] CPU features: detected: Kernel page table isolation (KPTI)
187[    0.000000] Speculative Store Bypass Disable mitigation not required
188[    0.000000] CPU features: detected: ARM erratum 1319367
189[    0.000000] Built 1 zonelists, mobility grouping on.  Total pages: 3596040
190[    0.000000] Policy zone: Normal
191[    0.000000] Kernel command line: console=ttyAMA0,115200 earlycon=pl011,mmio32,0x21c0000 pci=pcie_bus_perf root=PARTUUID=30303030-01 rw rootwait arm-smmu.disable_bypass=0
192[    0.000000] Dentry cache hash table entries: 2097152 (order: 12, 16777216 bytes, linear)
193[    0.000000] Inode-cache hash table entries: 1048576 (order: 11, 8388608 bytes, linear)
194[    0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off
195[    0.000000] software IO TLB: mapped [mem 0xbbfff000-0xbffff000] (64MB)
196[    0.000000] Memory: 14236220K/14612480K available (12028K kernel code, 1930K rwdata, 6528K rodata, 5056K init, 449K bss, 376260K reserved, 0K cma-reserved)
197[    0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=16, Nodes=1
198[    0.000000] rcu: Preemptible hierarchical RCU implementation.
199[    0.000000] rcu: 	RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=16.
200[    0.000000] 	Tasks RCU enabled.
201[    0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies.
202[    0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=16
203[    0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0
204[    0.000000] GICv3: GIC: Using split EOI/Deactivate mode
205[    0.000000] GICv3: 256 SPIs implemented
206[    0.000000] GICv3: 0 Extended SPIs implemented
207[    0.000000] GICv3: Distributor has no Range Selector support
208[    0.000000] GICv3: 16 PPIs implemented
209[    0.000000] GICv3: no VLPI support, no direct LPI support
210[    0.000000] GICv3: CPU0: found redistributor 0 region 0:0x0000000006200000
211[    0.000000] ITS [mem 0x06020000-0x0603ffff]
212[    0.000000] ITS@0x0000000006020000: allocated 65536 Devices @236e480000 (flat, esz 8, psz 64K, shr 0)
213[    0.000000] ITS: using cache flushing for cmd queue
214[    0.000000] GICv3: using LPI property table @0x000000236e470000
215[    0.000000] GIC: using cache flushing for LPI property table
216[    0.000000] GICv3: CPU0: using allocated LPI pending table @0x000000236e500000
217[    0.000000] random: get_random_bytes called from start_kernel+0x2b8/0x448 with crng_init=0
218[    0.000000] arch_timer: cp15 timer(s) running at 25.00MHz (phys).
219[    0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x5c409fb33, max_idle_ns: 440795203156 ns
220[    0.000001] sched_clock: 56 bits at 25MHz, resolution 39ns, wraps every 4398046511103ns
221[    0.008294] Console: colour dummy device 80x25
222[    0.012819] Calibrating delay loop (skipped), value calculated using timer frequency.. 50.00 BogoMIPS (lpj=100000)
223[    0.023285] pid_max: default: 32768 minimum: 301
224[    0.027981] LSM: Security Framework initializing
225[    0.032708] Mount-cache hash table entries: 32768 (order: 6, 262144 bytes, linear)
226[    0.040402] Mountpoint-cache hash table entries: 32768 (order: 6, 262144 bytes, linear)
227[    0.072527] ASID allocator initialised with 32768 entries
228[    0.085992] rcu: Hierarchical SRCU implementation.
229[    0.098865] Platform MSI: gic-its@6020000 domain created
230[    0.104269] PCI/MSI: /interrupt-controller@6000000/gic-its@6020000 domain created
231[    0.111858] fsl-mc MSI: /interrupt-controller@6000000/gic-its@6020000 domain created
232[    0.120065] EFI services will not be available.
233[    0.132650] smp: Bringing up secondary CPUs ...
234[    0.169327] Detected PIPT I-cache on CPU1
235[    0.169343] GICv3: CPU1: found redistributor 1 region 0:0x0000000006220000
236[    0.169354] GICv3: CPU1: using allocated LPI pending table @0x000000236e510000
237[    0.169370] CPU1: Booted secondary processor 0x0000000001 [0x410fd083]
238[    0.201348] Detected PIPT I-cache on CPU2
239[    0.201362] GICv3: CPU2: found redistributor 100 region 0:0x0000000006240000
240[    0.201374] GICv3: CPU2: using allocated LPI pending table @0x000000236e520000
241[    0.201390] CPU2: Booted secondary processor 0x0000000100 [0x410fd083]
242[    0.233368] Detected PIPT I-cache on CPU3
243[    0.233378] GICv3: CPU3: found redistributor 101 region 0:0x0000000006260000
244[    0.233389] GICv3: CPU3: using allocated LPI pending table @0x000000236e530000
245[    0.233403] CPU3: Booted secondary processor 0x0000000101 [0x410fd083]
246[    0.265396] Detected PIPT I-cache on CPU4
247[    0.265410] GICv3: CPU4: found redistributor 200 region 0:0x0000000006280000
248[    0.265421] GICv3: CPU4: using allocated LPI pending table @0x000000236e540000
249[    0.265437] CPU4: Booted secondary processor 0x0000000200 [0x410fd083]
250[    0.297418] Detected PIPT I-cache on CPU5
251[    0.297430] GICv3: CPU5: found redistributor 201 region 0:0x00000000062a0000
252[    0.297441] GICv3: CPU5: using allocated LPI pending table @0x000000236e550000
253[    0.297454] CPU5: Booted secondary processor 0x0000000201 [0x410fd083]
254[    0.329447] Detected PIPT I-cache on CPU6
255[    0.329463] GICv3: CPU6: found redistributor 300 region 0:0x00000000062c0000
256[    0.329475] GICv3: CPU6: using allocated LPI pending table @0x000000236e560000
257[    0.329490] CPU6: Booted secondary processor 0x0000000300 [0x410fd083]
258[    0.361471] Detected PIPT I-cache on CPU7
259[    0.361484] GICv3: CPU7: found redistributor 301 region 0:0x00000000062e0000
260[    0.361495] GICv3: CPU7: using allocated LPI pending table @0x000000236e570000
261[    0.361508] CPU7: Booted secondary processor 0x0000000301 [0x410fd083]
262[    0.393500] Detected PIPT I-cache on CPU8
263[    0.393518] GICv3: CPU8: found redistributor 400 region 0:0x0000000006300000
264[    0.393529] GICv3: CPU8: using allocated LPI pending table @0x000000236e580000
265[    0.393545] CPU8: Booted secondary processor 0x0000000400 [0x410fd083]
266[    0.425521] Detected PIPT I-cache on CPU9
267[    0.425536] GICv3: CPU9: found redistributor 401 region 0:0x0000000006320000
268[    0.425548] GICv3: CPU9: using allocated LPI pending table @0x000000236e590000
269[    0.425561] CPU9: Booted secondary processor 0x0000000401 [0x410fd083]
270[    0.457551] Detected PIPT I-cache on CPU10
271[    0.457570] GICv3: CPU10: found redistributor 500 region 0:0x0000000006340000
272[    0.457582] GICv3: CPU10: using allocated LPI pending table @0x000000236e5a0000
273[    0.457598] CPU10: Booted secondary processor 0x0000000500 [0x410fd083]
274[    0.489571] Detected PIPT I-cache on CPU11
275[    0.489587] GICv3: CPU11: found redistributor 501 region 0:0x0000000006360000
276[    0.489598] GICv3: CPU11: using allocated LPI pending table @0x000000236e5b0000
277[    0.489611] CPU11: Booted secondary processor 0x0000000501 [0x410fd083]
278[    0.521602] Detected PIPT I-cache on CPU12
279[    0.521622] GICv3: CPU12: found redistributor 600 region 0:0x0000000006380000
280[    0.521635] GICv3: CPU12: using allocated LPI pending table @0x000000236e5c0000
281[    0.521651] CPU12: Booted secondary processor 0x0000000600 [0x410fd083]
282[    0.553623] Detected PIPT I-cache on CPU13
283[    0.553641] GICv3: CPU13: found redistributor 601 region 0:0x00000000063a0000
284[    0.553652] GICv3: CPU13: using allocated LPI pending table @0x000000236e5d0000
285[    0.553665] CPU13: Booted secondary processor 0x0000000601 [0x410fd083]
286[    0.585654] Detected PIPT I-cache on CPU14
287[    0.585676] GICv3: CPU14: found redistributor 700 region 0:0x00000000063c0000
288[    0.585688] GICv3: CPU14: using allocated LPI pending table @0x000000236e5e0000
289[    0.585705] CPU14: Booted secondary processor 0x0000000700 [0x410fd083]
290[    0.617673] Detected PIPT I-cache on CPU15
291[    0.617692] GICv3: CPU15: found redistributor 701 region 0:0x00000000063e0000
292[    0.617703] GICv3: CPU15: using allocated LPI pending table @0x000000236e5f0000
293[    0.617717] CPU15: Booted secondary processor 0x0000000701 [0x410fd083]
294[    0.617756] smp: Brought up 1 node, 16 CPUs
295[    0.999803] SMP: Total of 16 processors activated.
296[    1.004669] CPU features: detected: 32-bit EL0 Support
297[    1.009869] CPU features: detected: CRC32 instructions
298[    1.025837] CPU: All CPU(s) started at EL2
299[    1.029999] alternatives: patching kernel code
300[    1.035132] devtmpfs: initialized
301[    1.039876] KASLR enabled
302[    1.042674] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
303[    1.052529] futex hash table entries: 4096 (order: 6, 262144 bytes, linear)
304[    1.059702] pinctrl core: initialized pinctrl subsystem
305[    1.065239] thermal_sys: Registered thermal governor 'step_wise'
306[    1.065240] thermal_sys: Registered thermal governor 'power_allocator'
307[    1.071449] DMI not present or invalid.
308[    1.082042] NET: Registered protocol family 16
309[    1.086783] DMA: preallocated 256 KiB pool for atomic allocations
310[    1.092946] audit: initializing netlink subsys (disabled)
311[    1.098465] audit: type=2000 audit(0.896:1): state=initialized audit_enabled=0 res=1
312[    1.106306] cpuidle: using governor menu
313[    1.110364] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers.
314[    1.117674] Serial: AMBA PL011 UART driver
315[    1.122663] Machine: SolidRun LX2160A Clearfog CX
316[    1.127415] SoC family: QorIQ LX2160A
317[    1.131109] SoC ID: svr:0x87361010, Revision: 1.0
318[    1.136668] 21c0000.serial: ttyAMA0 at MMIO 0x21c0000 (irq = 17, base_baud = 0) is a SBSA
319[    1.144941] printk: console [ttyAMA0] enabled
320[    1.144941] printk: console [ttyAMA0] enabled
321[    1.153682] printk: bootconsole [pl11] disabled
322[    1.153682] printk: bootconsole [pl11] disabled
323[    1.163000] 21d0000.serial: ttyAMA1 at MMIO 0x21d0000 (irq = 18, base_baud = 0) is a SBSA
324[    1.174456] fsl_mc_bus 80c000000.fsl-mc: MC firmware version: 10.18.0
325[    1.183488] fsl_mc_dprc dprc.1: DMA mask not set
326[    1.191688] HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages
327[    1.198384] HugeTLB registered 32.0 MiB page size, pre-allocated 0 pages
328[    1.205074] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
329[    1.211765] HugeTLB registered 64.0 KiB page size, pre-allocated 0 pages
330[    1.219526] cryptd: max_cpu_qlen set to 1000
331[    1.225579] ACPI: Interpreter disabled.
332[    1.229707] iommu: Default domain type: Translated
333[    1.234661] vgaarb: loaded
334[    1.237459] SCSI subsystem initialized
335[    1.241336] usbcore: registered new interface driver usbfs
336[    1.246828] usbcore: registered new interface driver hub
337[    1.252169] usbcore: registered new device driver usb
338[    1.257370] imx-i2c 2000000.i2c: can't get pinctrl, bus recovery not supported
339[    1.264655] i2c i2c-0: IMX I2C adapter registered
340[    1.269417] imx-i2c 2020000.i2c: can't get pinctrl, bus recovery not supported
341[    1.276661] i2c i2c-1: IMX I2C adapter registered
342[    1.281421] imx-i2c 2040000.i2c: can't get pinctrl, bus recovery not supported
343[    1.288693] i2c i2c-2: IMX I2C adapter registered
344[    1.293533] pps_core: LinuxPPS API ver. 1 registered
345[    1.298488] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
346[    1.307619] PTP clock support registered
347[    1.311566] EDAC MC: Ver: 3.0.0
348[    1.315070] FPGA manager framework
349[    1.318737] clocksource: Switched to clocksource arch_sys_counter
350[    1.324909] VFS: Disk quotas dquot_6.6.0
351[    1.328846] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
352[    1.335782] pnp: PnP ACPI: disabled
353[    1.341324] NET: Registered protocol family 2
354[    1.345810] tcp_listen_portaddr_hash hash table entries: 8192 (order: 5, 131072 bytes, linear)
355[    1.354497] TCP established hash table entries: 131072 (order: 8, 1048576 bytes, linear)
356[    1.362986] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes, linear)
357[    1.370780] TCP: Hash tables configured (established 131072 bind 65536)
358[    1.377459] UDP hash table entries: 8192 (order: 6, 262144 bytes, linear)
359[    1.384392] UDP-Lite hash table entries: 8192 (order: 6, 262144 bytes, linear)
360[    1.391818] NET: Registered protocol family 1
361[    1.396333] RPC: Registered named UNIX socket transport module.
362[    1.402246] RPC: Registered udp transport module.
363[    1.406940] RPC: Registered tcp transport module.
364[    1.411633] RPC: Registered tcp NFSv4.1 backchannel transport module.
365[    1.418065] PCI: CLS 0 bytes, default 64
366[    1.422690] hw perfevents: enabled with armv8_cortex_a72 PMU driver, 7 counters available
367[    1.430968] kvm [1]: IPA Size Limit: 44bits
368[    1.435410] kvm [1]: vgic-v2@c0e0000
369[    1.438989] kvm [1]: GIC system register CPU interface enabled
370[    1.444970] kvm [1]: vgic interrupt IRQ1
371[    1.449047] kvm [1]: Hyp mode initialized successfully
372[    1.457539] Initialise system trusted keyrings
373[    1.462028] workingset: timestamp_bits=44 max_order=22 bucket_order=0
374[    1.470664] squashfs: version 4.0 (2009/01/31) Phillip Lougher
375[    1.476758] NFS: Registering the id_resolver key type
376[    1.481807] Key type id_resolver registered
377[    1.485981] Key type id_legacy registered
378[    1.489987] nfs4filelayout_init: NFSv4 File Layout Driver Registering...
379[    1.496726] 9p: Installing v9fs 9p2000 file system support
380[    1.509038] Key type asymmetric registered
381[    1.513126] Asymmetric key parser 'x509' registered
382[    1.518004] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 245)
383[    1.525390] io scheduler mq-deadline registered
384[    1.529910] io scheduler kyber registered
385[    1.537316] layerscape-pcie-gen4 3600000.pcie: host bridge /soc/pcie@3600000 ranges:
386[    1.545059] layerscape-pcie-gen4 3600000.pcie:      MEM 0x9040000000..0x907fffffff -> 0x0040000000
387[    1.554111] layerscape-pcie-gen4 3600000.pcie: PCI host bridge to bus 0000:00
388[    1.561239] pci_bus 0000:00: root bus resource [bus 00-ff]
389[    1.566715] pci_bus 0000:00: root bus resource [mem 0x9040000000-0x907fffffff] (bus address [0x40000000-0x7fffffff])
390[    1.577236] pci 0000:00:00.0: [1957:8d90] type 01 class 0x060400
391[    1.583263] pci 0000:00:00.0: enabling Extended Tags
392[    1.588251] pci 0000:00:00.0: supports D1 D2
393[    1.592512] pci 0000:00:00.0: PME# supported from D0 D1 D2 D3hot D3cold
394[    1.599685] pci 0000:01:00.0: [126f:2263] type 00 class 0x010802
395[    1.605752] pci 0000:01:00.0: reg 0x10: [mem 0x9040000000-0x9040003fff 64bit]
396[    1.613722] pci 0000:00:00.0: BAR 14: assigned [mem 0x9040000000-0x90400fffff]
397[    1.620940] pci 0000:01:00.0: BAR 0: assigned [mem 0x9040000000-0x9040003fff 64bit]
398[    1.628606] pci 0000:00:00.0: PCI bridge to [bus 01-ff]
399[    1.633823] pci 0000:00:00.0:   bridge window [mem 0x9040000000-0x90400fffff]
400[    1.640956] pci 0000:00:00.0: Max Payload Size set to  256/ 256 (was  128), Max Read Rq  256
401[    1.649414] pci 0000:01:00.0: Max Payload Size set to  128/ 128 (was  128), Max Read Rq  128
402[    1.657916] layerscape-pcie-gen4 3800000.pcie: host bridge /soc/pcie@3800000 ranges:
403[    1.665656] layerscape-pcie-gen4 3800000.pcie:      MEM 0xa040000000..0xa07fffffff -> 0x0040000000
404[    1.674719] layerscape-pcie-gen4 3800000.pcie: PCI host bridge to bus 0001:00
405[    1.681846] pci_bus 0001:00: root bus resource [bus 00-ff]
406[    1.687322] pci_bus 0001:00: root bus resource [mem 0xa040000000-0xa07fffffff] (bus address [0x40000000-0x7fffffff])
407[    1.697843] pci 0001:00:00.0: [1957:8d90] type 01 class 0x060400
408[    1.703876] pci 0001:00:00.0: enabling Extended Tags
409[    1.708871] pci 0001:00:00.0: supports D1 D2
410[    1.713132] pci 0001:00:00.0: PME# supported from D0 D1 D2 D3hot D3cold
411[    1.720293] pci 0001:01:00.0: [8086:1572] type 00 class 0x020000
412[    1.726379] pci 0001:01:00.0: reg 0x10: [mem 0xa040000000-0xa0407fffff 64bit pref]
413[    1.733994] pci 0001:01:00.0: reg 0x1c: [mem 0xa040800000-0xa040807fff 64bit pref]
414[    1.741596] pci 0001:01:00.0: reg 0x30: [mem 0xa040880000-0xa0408fffff pref]
415[    1.748882] pci 0001:01:00.0: PME# supported from D0 D3hot D3cold
416[    1.755064] pci 0001:01:00.0: reg 0x184: [mem 0x00000000-0x0000ffff 64bit pref]
417[    1.762363] pci 0001:01:00.0: VF(n) BAR0 space: [mem 0x00000000-0x003fffff 64bit pref] (contains BAR0 for 64 VFs)
418[    1.772669] pci 0001:01:00.0: reg 0x190: [mem 0x00000000-0x00003fff 64bit pref]
419[    1.779971] pci 0001:01:00.0: VF(n) BAR3 space: [mem 0x00000000-0x000fffff 64bit pref] (contains BAR3 for 64 VFs)
420[    1.790936] pci 0001:01:00.0: 32.000 Gb/s available PCIe bandwidth, limited by 5 GT/s x8 link at 0001:00:00.0 (capable of 63.008 Gb/s with 8 GT/s x8 link)
421[    1.804834] pci 0001:01:00.1: [8086:1572] type 00 class 0x020000
422[    1.810917] pci 0001:01:00.1: reg 0x10: [mem 0xa041000000-0xa0417fffff 64bit pref]
423[    1.818531] pci 0001:01:00.1: reg 0x1c: [mem 0xa041800000-0xa041807fff 64bit pref]
424[    1.826132] pci 0001:01:00.1: reg 0x30: [mem 0xa041880000-0xa0418fffff pref]
425[    1.833404] pci 0001:01:00.1: PME# supported from D0 D3hot D3cold
426[    1.839584] pci 0001:01:00.1: reg 0x184: [mem 0x00000000-0x0000ffff 64bit pref]
427[    1.846883] pci 0001:01:00.1: VF(n) BAR0 space: [mem 0x00000000-0x003fffff 64bit pref] (contains BAR0 for 64 VFs)
428[    1.857188] pci 0001:01:00.1: reg 0x190: [mem 0x00000000-0x00003fff 64bit pref]
429[    1.864486] pci 0001:01:00.1: VF(n) BAR3 space: [mem 0x00000000-0x000fffff 64bit pref] (contains BAR3 for 64 VFs)
430[    1.887212] pci 0001:00:00.0: bridge window [mem 0x00400000-0x017fffff 64bit pref] to [bus 01-ff] add_size 800000 add_align 400000
431[    1.898946] pci 0001:00:00.0: BAR 15: assigned [mem 0xa040000000-0xa041bfffff 64bit pref]
432[    1.907115] pci 0001:00:00.0: BAR 14: assigned [mem 0xa041c00000-0xa041cfffff]
433[    1.914331] pci 0001:01:00.0: BAR 0: assigned [mem 0xa040000000-0xa0407fffff 64bit pref]
434[    1.922433] pci 0001:01:00.1: BAR 0: assigned [mem 0xa040800000-0xa040ffffff 64bit pref]
435[    1.930534] pci 0001:01:00.0: BAR 6: assigned [mem 0xa041c00000-0xa041c7ffff pref]
436[    1.938093] pci 0001:01:00.1: BAR 6: assigned [mem 0xa041c80000-0xa041cfffff pref]
437[    1.945652] pci 0001:01:00.0: BAR 7: assigned [mem 0xa041000000-0xa0413fffff 64bit pref]
438[    1.953741] pci 0001:01:00.1: BAR 7: assigned [mem 0xa041400000-0xa0417fffff 64bit pref]
439[    1.961830] pci 0001:01:00.0: BAR 3: assigned [mem 0xa041800000-0xa041807fff 64bit pref]
440[    1.969931] pci 0001:01:00.1: BAR 3: assigned [mem 0xa041808000-0xa04180ffff 64bit pref]
441[    1.978032] pci 0001:01:00.0: BAR 10: assigned [mem 0xa041810000-0xa04190ffff 64bit pref]
442[    1.986207] pci 0001:01:00.1: BAR 10: assigned [mem 0xa041910000-0xa041a0ffff 64bit pref]
443[    1.994384] pci 0001:00:00.0: PCI bridge to [bus 01-ff]
444[    1.999602] pci 0001:00:00.0:   bridge window [mem 0xa041c00000-0xa041cfffff]
445[    2.006735] pci 0001:00:00.0:   bridge window [mem 0xa040000000-0xa041bfffff 64bit pref]
446[    2.014827] pci 0001:00:00.0: Max Payload Size set to  256/ 256 (was  128), Max Read Rq  256
447[    2.023288] pci 0001:01:00.0: Max Payload Size set to  256/2048 (was  128), Max Read Rq  256
448[    2.031749] pci 0001:01:00.1: Max Payload Size set to  256/2048 (was  128), Max Read Rq  256
449[    2.040464] EINJ: ACPI disabled.
450[    2.047429] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
451[    2.054379] SuperH (H)SCI(F) driver initialized
452[    2.059082] msm_serial: driver initialized
453[    2.063742] arm-smmu 5000000.iommu: probing hardware configuration...
454[    2.070219] arm-smmu 5000000.iommu: SMMUv2 with:
455[    2.074830] arm-smmu 5000000.iommu: 	stage 1 translation
456[    2.080132] arm-smmu 5000000.iommu: 	stage 2 translation
457[    2.085434] arm-smmu 5000000.iommu: 	nested translation
458[    2.090649] arm-smmu 5000000.iommu: 	coherent table walk
459[    2.095951] arm-smmu 5000000.iommu: 	(IDR0.CTTW overridden by FW configuration)
460[    2.103250] arm-smmu 5000000.iommu: 	stream matching with 128 register groups
461[    2.110376] arm-smmu 5000000.iommu: 	64 context banks (0 stage-2 only)
462[    2.116895] arm-smmu 5000000.iommu: 	Supported page sizes: 0x61311000
463[    2.123325] arm-smmu 5000000.iommu: 	Stage-1: 48-bit VA -> 48-bit IPA
464[    2.129755] arm-smmu 5000000.iommu: 	Stage-2: 48-bit IPA -> 48-bit PA
465[    2.141459] loop: module loaded
466[    2.145523] nvme nvme0: pci function 0000:01:00.0
467[    2.150543] ahci-qoriq 3200000.sata: AHCI 0001.0301 32 slots 1 ports 6 Gbps 0x1 impl platform mode
468[    2.159496] ahci-qoriq 3200000.sata: flags: 64bit ncq sntf pm clo only pmp fbs pio slum part ccc sds apst
469[    2.169341] scsi host0: ahci-qoriq
470[    2.172835] ata1: SATA max UDMA/133 mmio [mem 0x03200000-0x0320ffff] port 0x100 irq 24
471[    2.180812] ahci-qoriq 3210000.sata: AHCI 0001.0301 32 slots 1 ports 6 Gbps 0x1 impl platform mode
472[    2.189764] ahci-qoriq 3210000.sata: flags: 64bit ncq sntf pm clo only pmp fbs pio slum part ccc sds apst
473[    2.199589] scsi host1: ahci-qoriq
474[    2.203043] ata2: SATA max UDMA/133 mmio [mem 0x03210000-0x0321ffff] port 0x100 irq 25
475[    2.211014] ahci-qoriq 3220000.sata: AHCI 0001.0301 32 slots 1 ports 6 Gbps 0x1 impl platform mode
476[    2.219966] ahci-qoriq 3220000.sata: flags: 64bit ncq sntf pm clo only pmp fbs pio slum part ccc sds apst
477[    2.229789] scsi host2: ahci-qoriq
478[    2.233244] ata3: SATA max UDMA/133 mmio [mem 0x03220000-0x0322ffff] port 0x100 irq 26
479[    2.241215] ahci-qoriq 3230000.sata: AHCI 0001.0301 32 slots 1 ports 6 Gbps 0x1 impl platform mode
480[    2.250168] ahci-qoriq 3230000.sata: flags: 64bit ncq sntf pm clo only pmp fbs pio slum part ccc sds apst
481[    2.259992] scsi host3: ahci-qoriq
482[    2.263446] ata4: SATA max UDMA/133 mmio [mem 0x03230000-0x0323ffff] port 0x100 irq 27
483[    2.272001] spi-nor spi0.0: found mt35xu512aba, expected m25p80
484[    2.277937] spi-nor spi0.0: mt35xu512aba (65536 Kbytes)
485[    2.287804] libphy: Fixed MDIO Bus: probed
486[    2.292001] tun: Universal TUN/TAP device driver, 1.6
487[    2.297300] thunder_xcv, ver 1.0
488[    2.300536] thunder_bgx, ver 1.0
489[    2.303767] nicpf, ver 1.0
490[    2.306614] libphy: Freescale XGMAC MDIO Bus: probed
491[    2.311845] libphy: Freescale XGMAC MDIO Bus: probed
492[    2.316986] hclge is initializing
493[    2.320296] hns3: Hisilicon Ethernet Network Driver for Hip08 Family - version
494[    2.327508] hns3: Copyright (c) 2017 Huawei Corporation.
495[    2.332827] e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k
496[    2.338649] e1000e: Copyright(c) 1999 - 2015 Intel Corporation.
497[    2.344577] igb: Intel(R) Gigabit Ethernet Network Driver - version 5.6.0-k
498[    2.351528] igb: Copyright (c) 2007-2014 Intel Corporation.
499[    2.357107] igbvf: Intel(R) Gigabit Virtual Function Network Driver - version 2.4.0-k
500[    2.364368] nvme nvme0: missing or invalid SUBNQN field.
501[    2.364926] igbvf: Copyright (c) 2009 - 2012 Intel Corporation.
502[    2.376253] sky2: driver version 1.30
503[    2.380165] dwc3 3100000.usb: Failed to get clk 'ref': -2
504[    2.383307] nvme nvme0: allocated 64 MiB host memory buffer.
505[    2.385836] dwc3 3110000.usb: Failed to get clk 'ref': -2
506[    2.397237] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
507[    2.403758] ehci-pci: EHCI PCI platform driver
508[    2.406469] nvme nvme0: 8/0/0 default/read/poll queues
509[    2.408204] ehci-platform: EHCI generic platform driver
510[    2.418585] ehci-orion: EHCI orion driver
511[    2.420565]  nvme0n1: p1
512[    2.422620] ehci-exynos: EHCI EXYNOS driver
513[    2.429312] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
514[    2.435492] ohci-pci: OHCI PCI platform driver
515[    2.439941] ohci-platform: OHCI generic platform driver
516[    2.445193] ohci-exynos: OHCI EXYNOS driver
517[    2.449506] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller
518[    2.454992] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 1
519[    2.462716] xhci-hcd xhci-hcd.0.auto: hcc params 0x0220f66d hci version 0x100 quirks 0x0000000002010010
520[    2.472119] xhci-hcd xhci-hcd.0.auto: irq 22, io mem 0x03100000
521[    2.478302] hub 1-0:1.0: USB hub found
522[    2.482057] hub 1-0:1.0: 1 port detected
523[    2.486070] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller
524[    2.491552] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 2
525[    2.492858] ata1: SATA link down (SStatus 0 SControl 300)
526[    2.499202] xhci-hcd xhci-hcd.0.auto: Host supports USB 3.0 SuperSpeed
527[    2.499221] usb usb2: We don't know the algorithms for LPM for this host, disabling LPM.
528[    2.519346] hub 2-0:1.0: USB hub found
529[    2.523098] hub 2-0:1.0: 1 port detected
530[    2.524475] ata2: SATA link down (SStatus 0 SControl 300)
531[    2.527128] xhci-hcd xhci-hcd.1.auto: xHCI Host Controller
532[    2.537882] xhci-hcd xhci-hcd.1.auto: new USB bus registered, assigned bus number 3
533[    2.545603] xhci-hcd xhci-hcd.1.auto: hcc params 0x0220f66d hci version 0x100 quirks 0x0000000002010010
534[    2.555000] xhci-hcd xhci-hcd.1.auto: irq 23, io mem 0x03110000
535[    2.557685] ata3: SATA link down (SStatus 0 SControl 300)
536[    2.561126] hub 3-0:1.0: USB hub found
537[    2.570048] hub 3-0:1.0: 1 port detected
538[    2.574056] xhci-hcd xhci-hcd.1.auto: xHCI Host Controller
539[    2.579538] xhci-hcd xhci-hcd.1.auto: new USB bus registered, assigned bus number 4
540[    2.587188] xhci-hcd xhci-hcd.1.auto: Host supports USB 3.0 SuperSpeed
541[    2.588023] ata4: SATA link down (SStatus 0 SControl 300)
542[    2.593722] usb usb4: We don't know the algorithms for LPM for this host, disabling LPM.
543[    2.607320] hub 4-0:1.0: USB hub found
544[    2.611071] hub 4-0:1.0: 1 port detected
545[    2.615204] usbcore: registered new interface driver usb-storage
546[    2.622132] i2c /dev entries driver
547[    2.626904] i2c i2c-0: Added multiplexed i2c bus 3
548[    2.631794] i2c i2c-0: Added multiplexed i2c bus 4
549[    2.636681] i2c i2c-0: Added multiplexed i2c bus 5
550[    2.641571] i2c i2c-0: Added multiplexed i2c bus 6
551[    2.646423] i2c i2c-0: Added multiplexed i2c bus 7
552[    2.651270] i2c i2c-0: Added multiplexed i2c bus 8
553[    2.656115] i2c i2c-0: Added multiplexed i2c bus 9
554[    2.660964] i2c i2c-0: Added multiplexed i2c bus 10
555[    2.665836] pca954x 0-0077: registered 8 multiplexed busses for I2C mux pca9547
556[    2.675580] qoriq_cpufreq: Freescale QorIQ CPU frequency scaling driver
557[    2.682694] sdhci: Secure Digital Host Controller Interface driver
558[    2.688876] sdhci: Copyright(c) Pierre Ossman
559[    2.693364] Synopsys Designware Multimedia Card Interface Driver
560[    2.699663] sdhci-pltfm: SDHCI platform and OF driver helper
561[    2.730889] mmc0: SDHCI controller on 2140000.esdhc [2140000.esdhc] using ADMA 64-bit
562[    2.764158] mmc1: SDHCI controller on 2150000.esdhc [2150000.esdhc] using ADMA 64-bit
563[    2.772299] mmc0: new high speed SDHC card at address 1234
564[    2.777900] ledtrig-cpu: registered to indicate activity on CPUs
565[    2.778056] mmcblk0: mmc0:1234 SA04G 3.64 GiB
566[    2.784441] usbcore: registered new interface driver usbhid
567[    2.793917] usbhid: USB HID core driver
568[    2.798749] optee: probing for conduit method from DT.
569[    2.803879] optee: api uid mismatch
570[    2.807477] NET: Registered protocol family 17
571[    2.811989] 9pnet: Installing 9P2000 support
572[    2.816275] Key type dns_resolver registered
573[    2.820684] registered taskstats version 1
574[    2.824778] Loading compiled-in X.509 certificates
575[    2.870744] mmc1: new HS400 MMC card at address 0001
576[    2.875960] mmcblk1: mmc1:0001 DF4064 58.2 GiB
577[    2.880597] mmcblk1boot0: mmc1:0001 DF4064 partition 1 4.00 MiB
578[    2.885731] fsl_mc_dprc dprc.1: No more resources of type dpmcp left
579[    2.886634] mmcblk1boot1: mmc1:0001 DF4064 partition 2 4.00 MiB
580[    2.893147] fsl_mc_dprc dprc.1: No more resources of type dpmcp left
581[    2.898830] mmcblk1rpmb: mmc1:0001 DF4064 partition 3 4.00 MiB, chardev (236:0)
582[    2.906749] usb 3-1: new high-speed USB device number 2 using xhci-hcd
583[    2.958214] ptp_qoriq: device tree node missing required elements, try automatic configuration
584[    2.966892] pps pps0: new PPS source ptp0
585[    2.977612] fsl_mc_dpio dpio.15: probed
586[    2.977770] hub 3-1:1.0: USB hub found
587[    2.985215] hub 3-1:1.0: 4 ports detected
588[    2.988699] fsl_mc_dpio dpio.14: probed
589[    3.000187] fsl_mc_dpio dpio.13: probed
590[    3.011168] fsl_mc_dpio dpio.12: probed
591[    3.022137] fsl_mc_dpio dpio.11: probed
592[    3.033112] fsl_mc_dpio dpio.10: probed
593[    3.044093] fsl_mc_dpio dpio.9: probed
594[    3.055054] fsl_mc_dpio dpio.8: probed
595[    3.066013] fsl_mc_dpio dpio.7: probed
596[    3.066774] usb 4-1: new SuperSpeed Gen 1 USB device number 2 using xhci-hcd
597[    3.076993] fsl_mc_dpio dpio.6: probed
598[    3.087958] fsl_mc_dpio dpio.5: probed
599[    3.098853] fsl_mc_dpio dpio.4: probed
600[    3.109782] fsl_mc_dpio dpio.3: probed
601[    3.120728] fsl_mc_dpio dpio.2: probed
602[    3.121751] hub 4-1:1.0: USB hub found
603[    3.128238] hub 4-1:1.0: 4 ports detected
604[    3.131726] fsl_mc_dpio dpio.1: probed
605[    3.143186] fsl_mc_dpio dpio.0: probed
606[    3.152174] fsl_mc_dprc dprc.1: DPRC device bound to driver
607[    3.309194] libphy: Freescale XGMAC MDIO Bus: probed
608[    3.314362] fsl_dpaa2_eth dpni.0 (unnamed net_device) (uninitialized): PHY [8b96000:01] driver [Generic PHY] (irq=POLL)
609[    3.325516] fsl_dpaa2_eth dpni.0: Probed interface eth0
610[    3.326750] usb 3-1.3: new high-speed USB device number 3 using xhci-hcd
611[    3.332310] dpaa2_caam dpseci.0: dpseci v5.3
612[    3.364924] fsl_mc_dprc dprc.1 (unnamed net_device) (uninitialized): netif_napi_add() called with weight 512
613[    3.390336] dpaa2_caam dpseci.0: algorithms registered in /proc/crypto
614[    3.393715] hub 3-1.3:1.0: USB hub found
615[    3.398129] dpaa2_caam dpseci.0: hash algorithms registered in /proc/crypto
616[    3.400796] hub 3-1.3:1.0: 4 ports detected
617[    3.407952] hctosys: unable to open rtc device (rtc0)
618[    3.462268] EXT4-fs (nvme0n1p1): mounted filesystem with ordered data mode. Opts: (null)
619[    3.470374] VFS: Mounted root (ext4 filesystem) on device 259:1.
620[    3.477433] devtmpfs: mounted
621[    3.481515] Freeing unused kernel memory: 5056K
622[    3.486143] Run /sbin/init as init process
623[    3.499343] random: fast init done
624[    3.536083] systemd[1]: System time before build time, advancing clock.
625[    3.556074] NET: Registered protocol family 10
626[    3.560953] Segment Routing with IPv6
627[    3.570765] systemd[1]: systemd 242 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN2 -IDN +PCRE2 default-hierarchy=hybrid)
628[    3.592334] systemd[1]: Detected architecture arm64.
629
630Welcome to Ubuntu 19.10!
631
632[    3.627775] systemd[1]: Set hostname to <clearfog>.
633[    3.633218] systemd[1]: Failed to bump fs.file-max, ignoring: Invalid argument
634[    3.642097] systemd[1]: Couldn't move remaining userspace processes, ignoring: Input/output error
635[    3.682033] systemd[1]: File /lib/systemd/system/systemd-journald.service:12 configures an IP firewall (IPAddressDeny=any), but the local system does not support BPF/cgroup based firewalling.
636[    3.699088] systemd[1]: Proceeding WITHOUT firewalling in effect! (This warning is only shown for the first loaded unit using IP firewalling.)
637[    3.739716] systemd[1]: /lib/systemd/system/dbus.socket:4: ListenStream= references a path below legacy directory /var/run/, updating /var/run/dbus/system_bus_socket → /run/dbus/system_bus_socket; please update the unit file accordingly.
638[    3.775198] systemd[1]: /lib/systemd/system/fancontrol.service:9: PIDFile= references a path below legacy directory /var/run/, updating /var/run/fancontrol.pid → /run/fancontrol.pid; please update the unit file accordingly.
639[    3.813419] systemd[1]: /lib/systemd/system/docker.socket:5: ListenStream= references a path below legacy directory /var/run/, updating /var/run/docker.sock → /run/docker.sock; please update the unit file accordingly.
640[    3.836910] random: systemd: uninitialized urandom read (16 bytes read)
641[  OK  ] Listening on initctl Compatibility Named Pipe.
642[    3.858786] random: systemd: uninitialized urandom read (16 bytes read)
643[  OK  ] Listening on Syslog Socket.
644[    3.878768] random: systemd: uninitialized urandom read (16 bytes read)
645[  OK  ] Reached target Remote File Systems.
646[  OK  ] Reached target Swap.
647[  OK  ] Created slice User and Session Slice.
648[  OK  ] Listening on Journal Audit Socket.
649[  OK  ] Listening on Journal Socket (/dev/log).
650[  OK  ] Listening on udev Control Socket.
651[  OK  ] Listening on udev Kernel Socket.
652[  OK  ] Listening on Journal Socket.
653         Starting Set the console keyboard layout...
654         Starting Create list of re…odes for the current kernel...
655         Starting Remount Root and Kernel File Systems...
656         Starting udev Coldplug all Devices...
657         Mounting POSIX Message Queue File System...
658         Mounting Huge Pages File System...
659[  OK  ] Started Forward Password R…uests to Wall Directory Watch.
660         Starting Load Kernel Modules...
661[    4.127018] amc6821 4-0018: Revision 3
662[  OK  ] Reached target Slices.
663[  OK  ] Created slice system-serial\x2dgetty.slice.
664         Starting Journal Service...
665[  OK  ] Started Dispatch Password …ts to Console Directory Watch.
666[  OK  ] Reached target Local Encrypted Volumes.
667[  OK  ] Reached target Paths.
668         Mounting Kernel Debug File System...
669[  OK  ] Started Set the console keyboard layout.
670[  OK  ] Started Create list of req… nodes for the current kernel.
671[  OK  ] Started Remount Root and Kernel File Systems.
672[  OK  ] Mounted POSIX Message Queue File System.
673[  OK  ] Mounted Huge Pages File System.
674[  OK  ] Started Load Kernel Modules.
675[  OK  ] Mounted Kernel Debug File System.
676         Starting Apply Kernel Variables...
677         Mounting Kernel Configuration File System...
678         Starting Create System Users...
679         Starting Load/Save Random Seed...
680[  OK  ] Started Journal Service.
681[  OK  ] Started udev Coldplug all Devices.
682[  OK  ] Started Apply Kernel Variables.
683[  OK  ] Mounted Kernel Configuration File System.
684[  OK  ] Started Create System Users.
685[  OK  ] Started Load/Save Random Seed.
686         Starting Create Static Device Nodes in /dev...
687         Starting Helper to synchronize boot up for ifupdown...
688         Starting Flush Journal to Persistent Storage...
689[  OK  ] Started Create Static Device Nodes in /dev.
690[  OK  ] Started Helper to synchronize boot up for ifupdown.
691[  OK  ] Reached target Local File Systems (Pre).
692[  OK  ] Reached target Local File Systems.
693         Starting Enable support fo…l executable binary formats...
694         Starting Set console font and keymap...
695         Starting Raise network interfaces...
696         Starting udev Kernel Device Manager...
697[  OK  ] Started Enable support for…nal executable binary formats.
698[  OK  ] Started udev Kernel Device Manager.
699[  OK  ] Started Set console font and keymap.
700[  OK  ] Started Raise network interfaces.
701         Starting Network Service...
702[  OK  ] Found device /dev/ttyAMA0.
703[  OK  ] Started Flush Journal to Persistent Storage.
704[  OK  ] Started Network Service.
705         Starting Create Volatile Files and Directories...
706[  OK  ] Started Create Volatile Files and Directories.
707         Starting Network Name Resolution...
708         Starting Network Time Synchronization...
709         Starting Update UTMP about System Boot/Shutdown...
710[  OK  ] Started Update UTMP about System Boot/Shutdown.
711[  OK  ] Started Network Name Resolution.
712[  OK  ] Started Network Time Synchronization.
713[  OK  ] Reached target System Initialization.
714         Starting Docker Socket for the API.
715[  OK  ] Started Daily Cleanup of Temporary Directories.
716[  OK  ] Listening on D-Bus System Message Bus Socket.
717[  OK  ] Listening on Avahi mDNS/DNS-SD Stack Activation Socket.
718[  OK  ] Reached target System Time Set.
719[  OK  ] Reached target System Time Synchronized.
720[  OK  ] Started Discard unused blocks once a week.
721[  OK  ] Started Daily apt download activities.
722[  OK  ] Started Daily apt upgrade and clean activities.
723[  OK  ] Started Daily man-db regeneration.
724[  OK  ] Started Daily rotation of log files.
725[  OK  ] Started Message of the Day.
726[  OK  ] Started Periodic ext4 Onli…ata Check for All Filesystems.
727[  OK  ] Reached target Timers.
728[  OK  ] Reached target Host and Network Name Lookups.
729[  OK  ] Listening on Docker Socket for the API.
730[  OK  ] Reached target Sockets.
731[  OK  ] Reached target Basic System.
732         Starting Login Service...
733         Starting Avahi mDNS/DNS-SD Stack...
734         Starting Remove Stale Onli…t4 Metadata Check Snapshots...
735[  OK  ] Started D-Bus System Message Bus.
736         Starting Ubuntu FAN network setup...
737[  OK  ] Started Save initial kernel messages after boot.
738[  OK  ] Started Set the CPU Frequency Scaling governor.
739         Starting System Logging Service...
740         Starting Network Manager...
741         Starting WPA supplicant...
742         Starting Initialize hardware monitoring sensors...
743[  OK  ] Started System Logging Service.
744[  OK  ] Started Ubuntu FAN network setup.
745[  OK  ] Started WPA supplicant.
746[  OK  ] Started Login Service.
747[  OK  ] Started Avahi mDNS/DNS-SD Stack.
748[  OK  ] Started Network Manager.
749[  OK  ] Started Initialize hardware monitoring sensors.
750         Starting Hostname Service...
751[  OK  ] Reached target Network.
752         Starting containerd container runtime...
753         Starting Permit User Sessions...
754         Starting OpenBSD Secure Shell server...
755[  OK  ] Started containerd container runtime.
756[  OK  ] Started Permit User Sessions.
757         Starting Set console scheme...
758[  OK  ] Started Serial Getty on ttyAMA0.
759[  OK  ] Started Set console scheme.
760[  OK  ] Created slice system-getty.slice.
761[  OK  ] Started Getty on tty1.
762[  OK  ] Reached target Login Prompts.
763[  OK  ] Started Hostname Service.
764         Starting Network Manager Script Dispatcher Service...
765[  OK  ] Listening on Load/Save RF …itch Status /dev/rfkill Watch.
766[  OK  ] Started Network Manager Script Dispatcher Service.
767[  OK  ] Started Remove Stale Onlin…ext4 Metadata Check Snapshots.
768[  OK  ] Started OpenBSD Secure Shell server.
769[  OK  ] Reached target Multi-User System.
770[  OK  ] Reached target Graphical Interface.
771         Starting Update UTMP about System Runlevel Changes...
772[  OK  ] Started Update UTMP about System Runlevel Changes.
773
774Ubuntu 19.10 clearfog ttyAMA0
775
776clearfog login: [   51.794909] arm-smmu 5000000.iommu: Unhandled context fault: fsr=0x402, iova=0x2367c71000, fsynr=0x30001, cbfrsynra=0x2800, cb=3
777[   51.830783] iavf 0001:02:02.0: Admin queue command never completed
778[   52.850887] arm-smmu 5000000.iommu: Unhandled context fault: fsr=0x402, iova=0x236d672000, fsynr=0x30001, cbfrsynra=0x2800, cb=3
779[   52.886782] iavf 0001:02:02.0: Admin queue command never completed
780[   53.906889] arm-smmu 5000000.iommu: Unhandled context fault: fsr=0x402, iova=0x235aea7000, fsynr=0x30001, cbfrsynra=0x2800, cb=3
781[   53.942754] iavf 0001:02:02.0: Admin queue command never completed
782[   54.962881] arm-smmu 5000000.iommu: Unhandled context fault: fsr=0x402, iova=0x235b651000, fsynr=0x30001, cbfrsynra=0x2800, cb=3
783[   54.998778] iavf 0001:02:02.0: Admin queue command never completed
784[   56.018907] arm-smmu 5000000.iommu: Unhandled context fault: fsr=0x402, iova=0x2361daa000, fsynr=0x30001, cbfrsynra=0x2800, cb=3
785[   56.054756] iavf 0001:02:02.0: Admin queue command never completed
786[   57.074895] arm-smmu 5000000.iommu: Unhandled context fault: fsr=0x402, iova=0x2362d87000, fsynr=0x30001, cbfrsynra=0x2800, cb=3
787[   57.110775] iavf 0001:02:02.0: Admin queue command never completed
788[   58.130898] arm-smmu 5000000.iommu: Unhandled context fault: fsr=0x402, iova=0x2356072000, fsynr=0x30001, cbfrsynra=0x2800, cb=3
789[   58.166774] iavf 0001:02:02.0: Admin queue command never completed
790[   59.186878] arm-smmu 5000000.iommu: Unhandled context fault: fsr=0x402, iova=0x2361f06000, fsynr=0x30001, cbfrsynra=0x2800, cb=3
791[   59.222782] iavf 0001:02:02.0: Admin queue command never completed
792[   60.242874] arm-smmu 5000000.iommu: Unhandled context fault: fsr=0x402, iova=0x235ad76000, fsynr=0x30001, cbfrsynra=0x2800, cb=3
793[   60.278755] iavf 0001:02:02.0: Admin queue command never completed
794[   61.298880] arm-smmu 5000000.iommu: Unhandled context fault: fsr=0x402, iova=0x2362d8f000, fsynr=0x30001, cbfrsynra=0x2800, cb=3
795[   61.334775] iavf 0001:02:02.0: Admin queue command never completed
796[   62.354904] arm-smmu 5000000.iommu: Unhandled context fault: fsr=0x402, iova=0x235aee4000, fsynr=0x30001, cbfrsynra=0x2800, cb=3
797[   62.390779] iavf 0001:02:02.0: Admin queue command never completed
798[   63.410892] arm-smmu 5000000.iommu: Unhandled context fault: fsr=0x402, iova=0x236d70a000, fsynr=0x30001, cbfrsynra=0x2800, cb=3
799[   63.446786] iavf 0001:02:02.0: Admin queue command never completed
800[   64.466879] arm-smmu 5000000.iommu: Unhandled context fault: fsr=0x402, iova=0x2361e4f000, fsynr=0x30001, cbfrsynra=0x2800, cb=3
801[   64.502780] iavf 0001:02:02.0: Admin queue command never completed
802[   65.522900] arm-smmu 5000000.iommu: Unhandled context fault: fsr=0x402, iova=0x23616fd000, fsynr=0x30001, cbfrsynra=0x2800, cb=3
803[   65.558772] iavf 0001:02:02.0: Admin queue command never completed
804[   66.578883] arm-smmu 5000000.iommu: Unhandled context fault: fsr=0x402, iova=0x2361daa000, fsynr=0x30001, cbfrsynra=0x2800, cb=3
805[   66.614758] iavf 0001:02:02.0: Admin queue command never completed
806[   67.634871] arm-smmu 5000000.iommu: Unhandled context fault: fsr=0x402, iova=0x23616fd000, fsynr=0x30001, cbfrsynra=0x2800, cb=3
807[   67.670752] iavf 0001:02:02.0: Admin queue command never completed
808[   68.690889] arm-smmu 5000000.iommu: Unhandled context fault: fsr=0x402, iova=0x2363743000, fsynr=0x30001, cbfrsynra=0x2800, cb=3
809[   68.726772] iavf 0001:02:02.0: Admin queue command never completed
810[   69.746893] arm-smmu 5000000.iommu: Unhandled context fault: fsr=0x402, iova=0x2363574000, fsynr=0x30001, cbfrsynra=0x2800, cb=3
811[   69.782781] iavf 0001:02:02.0: Admin queue command never completed
812[   70.802880] arm-smmu 5000000.iommu: Unhandled context fault: fsr=0x402, iova=0x2361daa000, fsynr=0x30001, cbfrsynra=0x2800, cb=3
813[   70.838745] iavf 0001:02:02.0: Admin queue command never completed
814[   71.858882] arm-smmu 5000000.iommu: Unhandled context fault: fsr=0x402, iova=0x2367dc4000, fsynr=0x30001, cbfrsynra=0x2800, cb=3
815[   71.894781] iavf 0001:02:02.0: Admin queue command never completed
816[   71.901027] iavf 0001:02:02.0: Failed to communicate with PF; waiting before retry
817[   77.010959] arm-smmu 5000000.iommu: Unhandled context fault: fsr=0x402, iova=0x23616fd000, fsynr=0x30001, cbfrsynra=0x2800, cb=3
818[   77.046840] iavf 0001:02:02.0: Admin queue command never completed
819[   77.053034] iavf 0001:02:02.0: Failed to communicate with PF; waiting before retry
820[   82.131156] arm-smmu 5000000.iommu: Unhandled context fault: fsr=0x402, iova=0x235ae3c000, fsynr=0x30001, cbfrsynra=0x2800, cb=3
821[   82.167021] iavf 0001:02:02.0: Admin queue command never completed
822[   82.173212] iavf 0001:02:02.0: Failed to communicate with PF; waiting before retry
823
824clearfog login: dmarion
825Password:
826Last login: Fri Feb 14 10:39:37 CET 2020 from fe80::10ab:6dc7:f2a2:fb26%eth0 on pts/0
827Welcome to Ubuntu 19.10 (GNU/Linux 5.5.0-00702-gff4a3bb99622 aarch64)
828
829 * Documentation:  https://help.ubuntu.com
830 * Management:     https://landscape.canonical.com
831 * Support:        https://ubuntu.com/advantage
832
833 * Multipass 1.0 is out! Get Ubuntu VMs on demand on your Linux, Windows or
834   Mac. Supports cloud-init for fast, local, cloud devops simulation.
835
836     https://multipass.run/
837
838(dmarion@clearfog) 10:42 (~)>dmesg
839[    0.000000] Booting Linux on physical CPU 0x0000000000 [0x410fd083]
840[    0.000000] Linux version 5.5.0-00702-gff4a3bb99622 (dmarion@clearfog) (gcc version 9.2.1 20191008 (Ubuntu 9.2.1-9ubuntu2)) #15 SMP PREEMPT Thu Feb 13 11:47:51 CET 2020
841[    0.000000] Machine model: SolidRun LX2160A Clearfog CX
842[    0.000000] earlycon: pl11 at MMIO32 0x00000000021c0000 (options '')
843[    0.000000] printk: bootconsole [pl11] enabled
844[    0.000000] efi: Getting EFI parameters from FDT:
845[    0.000000] efi: UEFI not found.
846[    0.000000] NUMA: No NUMA configuration found
847[    0.000000] NUMA: Faking a node at [mem 0x0000000080000000-0x000000237fffffff]
848[    0.000000] NUMA: NODE_DATA [mem 0x237e3f3400-0x237e3f4fff]
849[    0.000000] Zone ranges:
850[    0.000000]   DMA      [mem 0x0000000080000000-0x00000000bfffffff]
851[    0.000000]   DMA32    [mem 0x00000000c0000000-0x00000000ffffffff]
852[    0.000000]   Normal   [mem 0x0000000100000000-0x000000237fffffff]
853[    0.000000] Movable zone start for each node
854[    0.000000] Early memory node ranges
855[    0.000000]   node   0: [mem 0x0000000080000000-0x00000000fbdfffff]
856[    0.000000]   node   0: [mem 0x0000002080000000-0x000000237fffffff]
857[    0.000000] Initmem setup node 0 [mem 0x0000000080000000-0x000000237fffffff]
858[    0.000000] On node 0 totalpages: 3653120
859[    0.000000]   DMA zone: 4096 pages used for memmap
860[    0.000000]   DMA zone: 0 pages reserved
861[    0.000000]   DMA zone: 262144 pages, LIFO batch:63
862[    0.000000]   DMA32 zone: 3832 pages used for memmap
863[    0.000000]   DMA32 zone: 245248 pages, LIFO batch:63
864[    0.000000]   Normal zone: 49152 pages used for memmap
865[    0.000000]   Normal zone: 3145728 pages, LIFO batch:63
866[    0.000000] psci: probing for conduit method from DT.
867[    0.000000] psci: PSCIv1.1 detected in firmware.
868[    0.000000] psci: Using standard PSCI v0.2 function IDs
869[    0.000000] psci: MIGRATE_INFO_TYPE not supported.
870[    0.000000] psci: SMC Calling Convention v1.1
871[    0.000000] percpu: Embedded 23 pages/cpu s53528 r8192 d32488 u94208
872[    0.000000] pcpu-alloc: s53528 r8192 d32488 u94208 alloc=23*4096
873[    0.000000] pcpu-alloc: [0] 00 [0] 01 [0] 02 [0] 03 [0] 04 [0] 05 [0] 06 [0] 07
874[    0.000000] pcpu-alloc: [0] 08 [0] 09 [0] 10 [0] 11 [0] 12 [0] 13 [0] 14 [0] 15
875[    0.000000] Detected PIPT I-cache on CPU0
876[    0.000000] CPU features: detected: GIC system register CPU interface
877[    0.000000] CPU features: detected: EL2 vector hardening
878[    0.000000] CPU features: kernel page table isolation forced ON by KASLR
879[    0.000000] CPU features: detected: Kernel page table isolation (KPTI)
880[    0.000000] Speculative Store Bypass Disable mitigation not required
881[    0.000000] CPU features: detected: ARM erratum 1319367
882[    0.000000] Built 1 zonelists, mobility grouping on.  Total pages: 3596040
883[    0.000000] Policy zone: Normal
884[    0.000000] Kernel command line: console=ttyAMA0,115200 earlycon=pl011,mmio32,0x21c0000 pci=pcie_bus_perf root=PARTUUID=30303030-01 rw rootwait arm-smmu.disable_bypass=0
885[    0.000000] Dentry cache hash table entries: 2097152 (order: 12, 16777216 bytes, linear)
886[    0.000000] Inode-cache hash table entries: 1048576 (order: 11, 8388608 bytes, linear)
887[    0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off
888[    0.000000] software IO TLB: mapped [mem 0xbbfff000-0xbffff000] (64MB)
889[    0.000000] Memory: 14236220K/14612480K available (12028K kernel code, 1930K rwdata, 6528K rodata, 5056K init, 449K bss, 376260K reserved, 0K cma-reserved)
890[    0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=16, Nodes=1
891[    0.000000] rcu: Preemptible hierarchical RCU implementation.
892[    0.000000] rcu: 	RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=16.
893[    0.000000] 	Tasks RCU enabled.
894[    0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies.
895[    0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=16
896[    0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0
897[    0.000000] GICv3: GIC: Using split EOI/Deactivate mode
898[    0.000000] GICv3: 256 SPIs implemented
899[    0.000000] GICv3: 0 Extended SPIs implemented
900[    0.000000] GICv3: Distributor has no Range Selector support
901[    0.000000] GICv3: 16 PPIs implemented
902[    0.000000] GICv3: no VLPI support, no direct LPI support
903[    0.000000] GICv3: CPU0: found redistributor 0 region 0:0x0000000006200000
904[    0.000000] ITS [mem 0x06020000-0x0603ffff]
905[    0.000000] ITS@0x0000000006020000: allocated 65536 Devices @236e480000 (flat, esz 8, psz 64K, shr 0)
906[    0.000000] ITS: using cache flushing for cmd queue
907[    0.000000] GICv3: using LPI property table @0x000000236e470000
908[    0.000000] GIC: using cache flushing for LPI property table
909[    0.000000] GICv3: CPU0: using allocated LPI pending table @0x000000236e500000
910[    0.000000] random: get_random_bytes called from start_kernel+0x2b8/0x448 with crng_init=0
911[    0.000000] arch_timer: cp15 timer(s) running at 25.00MHz (phys).
912[    0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x5c409fb33, max_idle_ns: 440795203156 ns
913[    0.000001] sched_clock: 56 bits at 25MHz, resolution 39ns, wraps every 4398046511103ns
914[    0.008294] Console: colour dummy device 80x25
915[    0.012819] Calibrating delay loop (skipped), value calculated using timer frequency.. 50.00 BogoMIPS (lpj=100000)
916[    0.023285] pid_max: default: 32768 minimum: 301
917[    0.027981] LSM: Security Framework initializing
918[    0.032708] Mount-cache hash table entries: 32768 (order: 6, 262144 bytes, linear)
919[    0.040402] Mountpoint-cache hash table entries: 32768 (order: 6, 262144 bytes, linear)
920[    0.072527] ASID allocator initialised with 32768 entries
921[    0.085992] rcu: Hierarchical SRCU implementation.
922[    0.098865] Platform MSI: gic-its@6020000 domain created
923[    0.104269] PCI/MSI: /interrupt-controller@6000000/gic-its@6020000 domain created
924[    0.111858] fsl-mc MSI: /interrupt-controller@6000000/gic-its@6020000 domain created
925[    0.120065] EFI services will not be available.
926[    0.132650] smp: Bringing up secondary CPUs ...
927[    0.169327] Detected PIPT I-cache on CPU1
928[    0.169343] GICv3: CPU1: found redistributor 1 region 0:0x0000000006220000
929[    0.169354] GICv3: CPU1: using allocated LPI pending table @0x000000236e510000
930[    0.169370] CPU1: Booted secondary processor 0x0000000001 [0x410fd083]
931[    0.201348] Detected PIPT I-cache on CPU2
932[    0.201362] GICv3: CPU2: found redistributor 100 region 0:0x0000000006240000
933[    0.201374] GICv3: CPU2: using allocated LPI pending table @0x000000236e520000
934[    0.201390] CPU2: Booted secondary processor 0x0000000100 [0x410fd083]
935[    0.233368] Detected PIPT I-cache on CPU3
936[    0.233378] GICv3: CPU3: found redistributor 101 region 0:0x0000000006260000
937[    0.233389] GICv3: CPU3: using allocated LPI pending table @0x000000236e530000
938[    0.233403] CPU3: Booted secondary processor 0x0000000101 [0x410fd083]
939[    0.265396] Detected PIPT I-cache on CPU4
940[    0.265410] GICv3: CPU4: found redistributor 200 region 0:0x0000000006280000
941[    0.265421] GICv3: CPU4: using allocated LPI pending table @0x000000236e540000
942[    0.265437] CPU4: Booted secondary processor 0x0000000200 [0x410fd083]
943[    0.297418] Detected PIPT I-cache on CPU5
944[    0.297430] GICv3: CPU5: found redistributor 201 region 0:0x00000000062a0000
945[    0.297441] GICv3: CPU5: using allocated LPI pending table @0x000000236e550000
946[    0.297454] CPU5: Booted secondary processor 0x0000000201 [0x410fd083]
947[    0.329447] Detected PIPT I-cache on CPU6
948[    0.329463] GICv3: CPU6: found redistributor 300 region 0:0x00000000062c0000
949[    0.329475] GICv3: CPU6: using allocated LPI pending table @0x000000236e560000
950[    0.329490] CPU6: Booted secondary processor 0x0000000300 [0x410fd083]
951[    0.361471] Detected PIPT I-cache on CPU7
952[    0.361484] GICv3: CPU7: found redistributor 301 region 0:0x00000000062e0000
953[    0.361495] GICv3: CPU7: using allocated LPI pending table @0x000000236e570000
954[    0.361508] CPU7: Booted secondary processor 0x0000000301 [0x410fd083]
955[    0.393500] Detected PIPT I-cache on CPU8
956[    0.393518] GICv3: CPU8: found redistributor 400 region 0:0x0000000006300000
957[    0.393529] GICv3: CPU8: using allocated LPI pending table @0x000000236e580000
958[    0.393545] CPU8: Booted secondary processor 0x0000000400 [0x410fd083]
959[    0.425521] Detected PIPT I-cache on CPU9
960[    0.425536] GICv3: CPU9: found redistributor 401 region 0:0x0000000006320000
961[    0.425548] GICv3: CPU9: using allocated LPI pending table @0x000000236e590000
962[    0.425561] CPU9: Booted secondary processor 0x0000000401 [0x410fd083]
963[    0.457551] Detected PIPT I-cache on CPU10
964[    0.457570] GICv3: CPU10: found redistributor 500 region 0:0x0000000006340000
965[    0.457582] GICv3: CPU10: using allocated LPI pending table @0x000000236e5a0000
966[    0.457598] CPU10: Booted secondary processor 0x0000000500 [0x410fd083]
967[    0.489571] Detected PIPT I-cache on CPU11
968[    0.489587] GICv3: CPU11: found redistributor 501 region 0:0x0000000006360000
969[    0.489598] GICv3: CPU11: using allocated LPI pending table @0x000000236e5b0000
970[    0.489611] CPU11: Booted secondary processor 0x0000000501 [0x410fd083]
971[    0.521602] Detected PIPT I-cache on CPU12
972[    0.521622] GICv3: CPU12: found redistributor 600 region 0:0x0000000006380000
973[    0.521635] GICv3: CPU12: using allocated LPI pending table @0x000000236e5c0000
974[    0.521651] CPU12: Booted secondary processor 0x0000000600 [0x410fd083]
975[    0.553623] Detected PIPT I-cache on CPU13
976[    0.553641] GICv3: CPU13: found redistributor 601 region 0:0x00000000063a0000
977[    0.553652] GICv3: CPU13: using allocated LPI pending table @0x000000236e5d0000
978[    0.553665] CPU13: Booted secondary processor 0x0000000601 [0x410fd083]
979[    0.585654] Detected PIPT I-cache on CPU14
980[    0.585676] GICv3: CPU14: found redistributor 700 region 0:0x00000000063c0000
981[    0.585688] GICv3: CPU14: using allocated LPI pending table @0x000000236e5e0000
982[    0.585705] CPU14: Booted secondary processor 0x0000000700 [0x410fd083]
983[    0.617673] Detected PIPT I-cache on CPU15
984[    0.617692] GICv3: CPU15: found redistributor 701 region 0:0x00000000063e0000
985[    0.617703] GICv3: CPU15: using allocated LPI pending table @0x000000236e5f0000
986[    0.617717] CPU15: Booted secondary processor 0x0000000701 [0x410fd083]
987[    0.617756] smp: Brought up 1 node, 16 CPUs
988[    0.999803] SMP: Total of 16 processors activated.
989[    1.004669] CPU features: detected: 32-bit EL0 Support
990[    1.009869] CPU features: detected: CRC32 instructions
991[    1.025837] CPU: All CPU(s) started at EL2
992[    1.029999] alternatives: patching kernel code
993[    1.035132] devtmpfs: initialized
994[    1.039876] KASLR enabled
995[    1.042674] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
996[    1.052529] futex hash table entries: 4096 (order: 6, 262144 bytes, linear)
997[    1.059702] pinctrl core: initialized pinctrl subsystem
998[    1.065239] thermal_sys: Registered thermal governor 'step_wise'
999[    1.065240] thermal_sys: Registered thermal governor 'power_allocator'
1000[    1.071449] DMI not present or invalid.
1001[    1.082042] NET: Registered protocol family 16
1002[    1.086783] DMA: preallocated 256 KiB pool for atomic allocations
1003[    1.092946] audit: initializing netlink subsys (disabled)
1004[    1.098465] audit: type=2000 audit(0.896:1): state=initialized audit_enabled=0 res=1
1005[    1.106306] cpuidle: using governor menu
1006[    1.110364] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers.
1007[    1.117674] Serial: AMBA PL011 UART driver
1008[    1.122663] Machine: SolidRun LX2160A Clearfog CX
1009[    1.127415] SoC family: QorIQ LX2160A
1010[    1.131109] SoC ID: svr:0x87361010, Revision: 1.0
1011[    1.136668] 21c0000.serial: ttyAMA0 at MMIO 0x21c0000 (irq = 17, base_baud = 0) is a SBSA
1012[    1.144941] printk: console [ttyAMA0] enabled
1013[    1.153682] printk: bootconsole [pl11] disabled
1014[    1.163000] 21d0000.serial: ttyAMA1 at MMIO 0x21d0000 (irq = 18, base_baud = 0) is a SBSA
1015[    1.174456] fsl_mc_bus 80c000000.fsl-mc: MC firmware version: 10.18.0
1016[    1.183488] fsl_mc_dprc dprc.1: DMA mask not set
1017[    1.191688] HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages
1018[    1.198384] HugeTLB registered 32.0 MiB page size, pre-allocated 0 pages
1019[    1.205074] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
1020[    1.211765] HugeTLB registered 64.0 KiB page size, pre-allocated 0 pages
1021[    1.219526] cryptd: max_cpu_qlen set to 1000
1022[    1.225579] ACPI: Interpreter disabled.
1023[    1.229707] iommu: Default domain type: Translated
1024[    1.234661] vgaarb: loaded
1025[    1.237459] SCSI subsystem initialized
1026[    1.241268] libata version 3.00 loaded.
1027[    1.241336] usbcore: registered new interface driver usbfs
1028[    1.246828] usbcore: registered new interface driver hub
1029[    1.252169] usbcore: registered new device driver usb
1030[    1.257370] imx-i2c 2000000.i2c: can't get pinctrl, bus recovery not supported
1031[    1.264655] i2c i2c-0: IMX I2C adapter registered
1032[    1.269417] imx-i2c 2020000.i2c: can't get pinctrl, bus recovery not supported
1033[    1.276661] i2c i2c-1: IMX I2C adapter registered
1034[    1.281421] imx-i2c 2040000.i2c: can't get pinctrl, bus recovery not supported
1035[    1.288693] i2c i2c-2: IMX I2C adapter registered
1036[    1.293533] pps_core: LinuxPPS API ver. 1 registered
1037[    1.298488] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
1038[    1.307619] PTP clock support registered
1039[    1.311566] EDAC MC: Ver: 3.0.0
1040[    1.315070] FPGA manager framework
1041[    1.318737] clocksource: Switched to clocksource arch_sys_counter
1042[    1.324909] VFS: Disk quotas dquot_6.6.0
1043[    1.328846] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
1044[    1.335782] pnp: PnP ACPI: disabled
1045[    1.341324] NET: Registered protocol family 2
1046[    1.345810] tcp_listen_portaddr_hash hash table entries: 8192 (order: 5, 131072 bytes, linear)
1047[    1.354497] TCP established hash table entries: 131072 (order: 8, 1048576 bytes, linear)
1048[    1.362986] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes, linear)
1049[    1.370780] TCP: Hash tables configured (established 131072 bind 65536)
1050[    1.377459] UDP hash table entries: 8192 (order: 6, 262144 bytes, linear)
1051[    1.384392] UDP-Lite hash table entries: 8192 (order: 6, 262144 bytes, linear)
1052[    1.391818] NET: Registered protocol family 1
1053[    1.396333] RPC: Registered named UNIX socket transport module.
1054[    1.402246] RPC: Registered udp transport module.
1055[    1.406940] RPC: Registered tcp transport module.
1056[    1.411633] RPC: Registered tcp NFSv4.1 backchannel transport module.
1057[    1.418065] PCI: CLS 0 bytes, default 64
1058[    1.422690] hw perfevents: enabled with armv8_cortex_a72 PMU driver, 7 counters available
1059[    1.430968] kvm [1]: IPA Size Limit: 44bits
1060[    1.435410] kvm [1]: vgic-v2@c0e0000
1061[    1.438989] kvm [1]: GIC system register CPU interface enabled
1062[    1.444970] kvm [1]: vgic interrupt IRQ1
1063[    1.449047] kvm [1]: Hyp mode initialized successfully
1064[    1.457539] Initialise system trusted keyrings
1065[    1.462028] workingset: timestamp_bits=44 max_order=22 bucket_order=0
1066[    1.470664] squashfs: version 4.0 (2009/01/31) Phillip Lougher
1067[    1.476758] NFS: Registering the id_resolver key type
1068[    1.481807] Key type id_resolver registered
1069[    1.485981] Key type id_legacy registered
1070[    1.489987] nfs4filelayout_init: NFSv4 File Layout Driver Registering...
1071[    1.496726] 9p: Installing v9fs 9p2000 file system support
1072[    1.509038] Key type asymmetric registered
1073[    1.513126] Asymmetric key parser 'x509' registered
1074[    1.518004] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 245)
1075[    1.525390] io scheduler mq-deadline registered
1076[    1.529910] io scheduler kyber registered
1077[    1.537316] layerscape-pcie-gen4 3600000.pcie: host bridge /soc/pcie@3600000 ranges:
1078[    1.545059] layerscape-pcie-gen4 3600000.pcie:      MEM 0x9040000000..0x907fffffff -> 0x0040000000
1079[    1.554111] layerscape-pcie-gen4 3600000.pcie: PCI host bridge to bus 0000:00
1080[    1.561239] pci_bus 0000:00: root bus resource [bus 00-ff]
1081[    1.566715] pci_bus 0000:00: root bus resource [mem 0x9040000000-0x907fffffff] (bus address [0x40000000-0x7fffffff])
1082[    1.577236] pci 0000:00:00.0: [1957:8d90] type 01 class 0x060400
1083[    1.583263] pci 0000:00:00.0: enabling Extended Tags
1084[    1.588251] pci 0000:00:00.0: supports D1 D2
1085[    1.592512] pci 0000:00:00.0: PME# supported from D0 D1 D2 D3hot D3cold
1086[    1.599685] pci 0000:01:00.0: [126f:2263] type 00 class 0x010802
1087[    1.605752] pci 0000:01:00.0: reg 0x10: [mem 0x9040000000-0x9040003fff 64bit]
1088[    1.613722] pci 0000:00:00.0: BAR 14: assigned [mem 0x9040000000-0x90400fffff]
1089[    1.620940] pci 0000:01:00.0: BAR 0: assigned [mem 0x9040000000-0x9040003fff 64bit]
1090[    1.628606] pci 0000:00:00.0: PCI bridge to [bus 01-ff]
1091[    1.633823] pci 0000:00:00.0:   bridge window [mem 0x9040000000-0x90400fffff]
1092[    1.640956] pci 0000:00:00.0: Max Payload Size set to  256/ 256 (was  128), Max Read Rq  256
1093[    1.649414] pci 0000:01:00.0: Max Payload Size set to  128/ 128 (was  128), Max Read Rq  128
1094[    1.657916] layerscape-pcie-gen4 3800000.pcie: host bridge /soc/pcie@3800000 ranges:
1095[    1.665656] layerscape-pcie-gen4 3800000.pcie:      MEM 0xa040000000..0xa07fffffff -> 0x0040000000
1096[    1.674719] layerscape-pcie-gen4 3800000.pcie: PCI host bridge to bus 0001:00
1097[    1.681846] pci_bus 0001:00: root bus resource [bus 00-ff]
1098[    1.687322] pci_bus 0001:00: root bus resource [mem 0xa040000000-0xa07fffffff] (bus address [0x40000000-0x7fffffff])
1099[    1.697843] pci 0001:00:00.0: [1957:8d90] type 01 class 0x060400
1100[    1.703876] pci 0001:00:00.0: enabling Extended Tags
1101[    1.708871] pci 0001:00:00.0: supports D1 D2
1102[    1.713132] pci 0001:00:00.0: PME# supported from D0 D1 D2 D3hot D3cold
1103[    1.720293] pci 0001:01:00.0: [8086:1572] type 00 class 0x020000
1104[    1.726379] pci 0001:01:00.0: reg 0x10: [mem 0xa040000000-0xa0407fffff 64bit pref]
1105[    1.733994] pci 0001:01:00.0: reg 0x1c: [mem 0xa040800000-0xa040807fff 64bit pref]
1106[    1.741596] pci 0001:01:00.0: reg 0x30: [mem 0xa040880000-0xa0408fffff pref]
1107[    1.748882] pci 0001:01:00.0: PME# supported from D0 D3hot D3cold
1108[    1.755064] pci 0001:01:00.0: reg 0x184: [mem 0x00000000-0x0000ffff 64bit pref]
1109[    1.762363] pci 0001:01:00.0: VF(n) BAR0 space: [mem 0x00000000-0x003fffff 64bit pref] (contains BAR0 for 64 VFs)
1110[    1.772669] pci 0001:01:00.0: reg 0x190: [mem 0x00000000-0x00003fff 64bit pref]
1111[    1.779971] pci 0001:01:00.0: VF(n) BAR3 space: [mem 0x00000000-0x000fffff 64bit pref] (contains BAR3 for 64 VFs)
1112[    1.790936] pci 0001:01:00.0: 32.000 Gb/s available PCIe bandwidth, limited by 5 GT/s x8 link at 0001:00:00.0 (capable of 63.008 Gb/s with 8 GT/s x8 link)
1113[    1.804834] pci 0001:01:00.1: [8086:1572] type 00 class 0x020000
1114[    1.810917] pci 0001:01:00.1: reg 0x10: [mem 0xa041000000-0xa0417fffff 64bit pref]
1115[    1.818531] pci 0001:01:00.1: reg 0x1c: [mem 0xa041800000-0xa041807fff 64bit pref]
1116[    1.826132] pci 0001:01:00.1: reg 0x30: [mem 0xa041880000-0xa0418fffff pref]
1117[    1.833404] pci 0001:01:00.1: PME# supported from D0 D3hot D3cold
1118[    1.839584] pci 0001:01:00.1: reg 0x184: [mem 0x00000000-0x0000ffff 64bit pref]
1119[    1.846883] pci 0001:01:00.1: VF(n) BAR0 space: [mem 0x00000000-0x003fffff 64bit pref] (contains BAR0 for 64 VFs)
1120[    1.857188] pci 0001:01:00.1: reg 0x190: [mem 0x00000000-0x00003fff 64bit pref]
1121[    1.864486] pci 0001:01:00.1: VF(n) BAR3 space: [mem 0x00000000-0x000fffff 64bit pref] (contains BAR3 for 64 VFs)
1122[    1.887212] pci 0001:00:00.0: bridge window [mem 0x00400000-0x017fffff 64bit pref] to [bus 01-ff] add_size 800000 add_align 400000
1123[    1.898946] pci 0001:00:00.0: BAR 15: assigned [mem 0xa040000000-0xa041bfffff 64bit pref]
1124[    1.907115] pci 0001:00:00.0: BAR 14: assigned [mem 0xa041c00000-0xa041cfffff]
1125[    1.914331] pci 0001:01:00.0: BAR 0: assigned [mem 0xa040000000-0xa0407fffff 64bit pref]
1126[    1.922433] pci 0001:01:00.1: BAR 0: assigned [mem 0xa040800000-0xa040ffffff 64bit pref]
1127[    1.930534] pci 0001:01:00.0: BAR 6: assigned [mem 0xa041c00000-0xa041c7ffff pref]
1128[    1.938093] pci 0001:01:00.1: BAR 6: assigned [mem 0xa041c80000-0xa041cfffff pref]
1129[    1.945652] pci 0001:01:00.0: BAR 7: assigned [mem 0xa041000000-0xa0413fffff 64bit pref]
1130[    1.953741] pci 0001:01:00.1: BAR 7: assigned [mem 0xa041400000-0xa0417fffff 64bit pref]
1131[    1.961830] pci 0001:01:00.0: BAR 3: assigned [mem 0xa041800000-0xa041807fff 64bit pref]
1132[    1.969931] pci 0001:01:00.1: BAR 3: assigned [mem 0xa041808000-0xa04180ffff 64bit pref]
1133[    1.978032] pci 0001:01:00.0: BAR 10: assigned [mem 0xa041810000-0xa04190ffff 64bit pref]
1134[    1.986207] pci 0001:01:00.1: BAR 10: assigned [mem 0xa041910000-0xa041a0ffff 64bit pref]
1135[    1.994384] pci 0001:00:00.0: PCI bridge to [bus 01-ff]
1136[    1.999602] pci 0001:00:00.0:   bridge window [mem 0xa041c00000-0xa041cfffff]
1137[    2.006735] pci 0001:00:00.0:   bridge window [mem 0xa040000000-0xa041bfffff 64bit pref]
1138[    2.014827] pci 0001:00:00.0: Max Payload Size set to  256/ 256 (was  128), Max Read Rq  256
1139[    2.023288] pci 0001:01:00.0: Max Payload Size set to  256/2048 (was  128), Max Read Rq  256
1140[    2.031749] pci 0001:01:00.1: Max Payload Size set to  256/2048 (was  128), Max Read Rq  256
1141[    2.040464] EINJ: ACPI disabled.
1142[    2.047429] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
1143[    2.054379] SuperH (H)SCI(F) driver initialized
1144[    2.059082] msm_serial: driver initialized
1145[    2.063742] arm-smmu 5000000.iommu: probing hardware configuration...
1146[    2.070219] arm-smmu 5000000.iommu: SMMUv2 with:
1147[    2.074830] arm-smmu 5000000.iommu: 	stage 1 translation
1148[    2.080132] arm-smmu 5000000.iommu: 	stage 2 translation
1149[    2.085434] arm-smmu 5000000.iommu: 	nested translation
1150[    2.090649] arm-smmu 5000000.iommu: 	coherent table walk
1151[    2.095951] arm-smmu 5000000.iommu: 	(IDR0.CTTW overridden by FW configuration)
1152[    2.103250] arm-smmu 5000000.iommu: 	stream matching with 128 register groups
1153[    2.110376] arm-smmu 5000000.iommu: 	64 context banks (0 stage-2 only)
1154[    2.116895] arm-smmu 5000000.iommu: 	Supported page sizes: 0x61311000
1155[    2.123325] arm-smmu 5000000.iommu: 	Stage-1: 48-bit VA -> 48-bit IPA
1156[    2.129755] arm-smmu 5000000.iommu: 	Stage-2: 48-bit IPA -> 48-bit PA
1157[    2.141459] loop: module loaded
1158[    2.145523] nvme nvme0: pci function 0000:01:00.0
1159[    2.150543] ahci-qoriq 3200000.sata: AHCI 0001.0301 32 slots 1 ports 6 Gbps 0x1 impl platform mode
1160[    2.159496] ahci-qoriq 3200000.sata: flags: 64bit ncq sntf pm clo only pmp fbs pio slum part ccc sds apst
1161[    2.169341] scsi host0: ahci-qoriq
1162[    2.172835] ata1: SATA max UDMA/133 mmio [mem 0x03200000-0x0320ffff] port 0x100 irq 24
1163[    2.180812] ahci-qoriq 3210000.sata: AHCI 0001.0301 32 slots 1 ports 6 Gbps 0x1 impl platform mode
1164[    2.189764] ahci-qoriq 3210000.sata: flags: 64bit ncq sntf pm clo only pmp fbs pio slum part ccc sds apst
1165[    2.199589] scsi host1: ahci-qoriq
1166[    2.203043] ata2: SATA max UDMA/133 mmio [mem 0x03210000-0x0321ffff] port 0x100 irq 25
1167[    2.211014] ahci-qoriq 3220000.sata: AHCI 0001.0301 32 slots 1 ports 6 Gbps 0x1 impl platform mode
1168[    2.219966] ahci-qoriq 3220000.sata: flags: 64bit ncq sntf pm clo only pmp fbs pio slum part ccc sds apst
1169[    2.229789] scsi host2: ahci-qoriq
1170[    2.233244] ata3: SATA max UDMA/133 mmio [mem 0x03220000-0x0322ffff] port 0x100 irq 26
1171[    2.241215] ahci-qoriq 3230000.sata: AHCI 0001.0301 32 slots 1 ports 6 Gbps 0x1 impl platform mode
1172[    2.250168] ahci-qoriq 3230000.sata: flags: 64bit ncq sntf pm clo only pmp fbs pio slum part ccc sds apst
1173[    2.259992] scsi host3: ahci-qoriq
1174[    2.263446] ata4: SATA max UDMA/133 mmio [mem 0x03230000-0x0323ffff] port 0x100 irq 27
1175[    2.272001] spi-nor spi0.0: found mt35xu512aba, expected m25p80
1176[    2.277937] spi-nor spi0.0: mt35xu512aba (65536 Kbytes)
1177[    2.287804] libphy: Fixed MDIO Bus: probed
1178[    2.292001] tun: Universal TUN/TAP device driver, 1.6
1179[    2.297300] thunder_xcv, ver 1.0
1180[    2.300536] thunder_bgx, ver 1.0
1181[    2.303767] nicpf, ver 1.0
1182[    2.306614] libphy: Freescale XGMAC MDIO Bus: probed
1183[    2.311845] libphy: Freescale XGMAC MDIO Bus: probed
1184[    2.316986] hclge is initializing
1185[    2.320296] hns3: Hisilicon Ethernet Network Driver for Hip08 Family - version
1186[    2.327508] hns3: Copyright (c) 2017 Huawei Corporation.
1187[    2.332827] e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k
1188[    2.338649] e1000e: Copyright(c) 1999 - 2015 Intel Corporation.
1189[    2.344577] igb: Intel(R) Gigabit Ethernet Network Driver - version 5.6.0-k
1190[    2.351528] igb: Copyright (c) 2007-2014 Intel Corporation.
1191[    2.357107] igbvf: Intel(R) Gigabit Virtual Function Network Driver - version 2.4.0-k
1192[    2.364368] nvme nvme0: missing or invalid SUBNQN field.
1193[    2.364926] igbvf: Copyright (c) 2009 - 2012 Intel Corporation.
1194[    2.376253] sky2: driver version 1.30
1195[    2.380165] dwc3 3100000.usb: Failed to get clk 'ref': -2
1196[    2.383307] nvme nvme0: allocated 64 MiB host memory buffer.
1197[    2.385836] dwc3 3110000.usb: Failed to get clk 'ref': -2
1198[    2.397237] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
1199[    2.403758] ehci-pci: EHCI PCI platform driver
1200[    2.406469] nvme nvme0: 8/0/0 default/read/poll queues
1201[    2.408204] ehci-platform: EHCI generic platform driver
1202[    2.418585] ehci-orion: EHCI orion driver
1203[    2.420565]  nvme0n1: p1
1204[    2.422620] ehci-exynos: EHCI EXYNOS driver
1205[    2.429312] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
1206[    2.435492] ohci-pci: OHCI PCI platform driver
1207[    2.439941] ohci-platform: OHCI generic platform driver
1208[    2.445193] ohci-exynos: OHCI EXYNOS driver
1209[    2.449506] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller
1210[    2.454992] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 1
1211[    2.462716] xhci-hcd xhci-hcd.0.auto: hcc params 0x0220f66d hci version 0x100 quirks 0x0000000002010010
1212[    2.472119] xhci-hcd xhci-hcd.0.auto: irq 22, io mem 0x03100000
1213[    2.478302] hub 1-0:1.0: USB hub found
1214[    2.482057] hub 1-0:1.0: 1 port detected
1215[    2.486070] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller
1216[    2.491552] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 2
1217[    2.492858] ata1: SATA link down (SStatus 0 SControl 300)
1218[    2.499202] xhci-hcd xhci-hcd.0.auto: Host supports USB 3.0 SuperSpeed
1219[    2.499221] usb usb2: We don't know the algorithms for LPM for this host, disabling LPM.
1220[    2.519346] hub 2-0:1.0: USB hub found
1221[    2.523098] hub 2-0:1.0: 1 port detected
1222[    2.524475] ata2: SATA link down (SStatus 0 SControl 300)
1223[    2.527128] xhci-hcd xhci-hcd.1.auto: xHCI Host Controller
1224[    2.537882] xhci-hcd xhci-hcd.1.auto: new USB bus registered, assigned bus number 3
1225[    2.545603] xhci-hcd xhci-hcd.1.auto: hcc params 0x0220f66d hci version 0x100 quirks 0x0000000002010010
1226[    2.555000] xhci-hcd xhci-hcd.1.auto: irq 23, io mem 0x03110000
1227[    2.557685] ata3: SATA link down (SStatus 0 SControl 300)
1228[    2.561126] hub 3-0:1.0: USB hub found
1229[    2.570048] hub 3-0:1.0: 1 port detected
1230[    2.574056] xhci-hcd xhci-hcd.1.auto: xHCI Host Controller
1231[    2.579538] xhci-hcd xhci-hcd.1.auto: new USB bus registered, assigned bus number 4
1232[    2.587188] xhci-hcd xhci-hcd.1.auto: Host supports USB 3.0 SuperSpeed
1233[    2.588023] ata4: SATA link down (SStatus 0 SControl 300)
1234[    2.593722] usb usb4: We don't know the algorithms for LPM for this host, disabling LPM.
1235[    2.607320] hub 4-0:1.0: USB hub found
1236[    2.611071] hub 4-0:1.0: 1 port detected
1237[    2.615204] usbcore: registered new interface driver usb-storage
1238[    2.622132] i2c /dev entries driver
1239[    2.626904] i2c i2c-0: Added multiplexed i2c bus 3
1240[    2.631794] i2c i2c-0: Added multiplexed i2c bus 4
1241[    2.636681] i2c i2c-0: Added multiplexed i2c bus 5
1242[    2.641571] i2c i2c-0: Added multiplexed i2c bus 6
1243[    2.646423] i2c i2c-0: Added multiplexed i2c bus 7
1244[    2.651270] i2c i2c-0: Added multiplexed i2c bus 8
1245[    2.656115] i2c i2c-0: Added multiplexed i2c bus 9
1246[    2.660964] i2c i2c-0: Added multiplexed i2c bus 10
1247[    2.665836] pca954x 0-0077: registered 8 multiplexed busses for I2C mux pca9547
1248[    2.675580] qoriq_cpufreq: Freescale QorIQ CPU frequency scaling driver
1249[    2.682694] sdhci: Secure Digital Host Controller Interface driver
1250[    2.688876] sdhci: Copyright(c) Pierre Ossman
1251[    2.693364] Synopsys Designware Multimedia Card Interface Driver
1252[    2.699663] sdhci-pltfm: SDHCI platform and OF driver helper
1253[    2.730889] mmc0: SDHCI controller on 2140000.esdhc [2140000.esdhc] using ADMA 64-bit
1254[    2.764158] mmc1: SDHCI controller on 2150000.esdhc [2150000.esdhc] using ADMA 64-bit
1255[    2.772299] mmc0: new high speed SDHC card at address 1234
1256[    2.777900] ledtrig-cpu: registered to indicate activity on CPUs
1257[    2.778056] mmcblk0: mmc0:1234 SA04G 3.64 GiB
1258[    2.784441] usbcore: registered new interface driver usbhid
1259[    2.793917] usbhid: USB HID core driver
1260[    2.798749] optee: probing for conduit method from DT.
1261[    2.803879] optee: api uid mismatch
1262[    2.807477] NET: Registered protocol family 17
1263[    2.811989] 9pnet: Installing 9P2000 support
1264[    2.816275] Key type dns_resolver registered
1265[    2.820684] registered taskstats version 1
1266[    2.824778] Loading compiled-in X.509 certificates
1267[    2.870744] mmc1: new HS400 MMC card at address 0001
1268[    2.875960] mmcblk1: mmc1:0001 DF4064 58.2 GiB
1269[    2.880597] mmcblk1boot0: mmc1:0001 DF4064 partition 1 4.00 MiB
1270[    2.885731] fsl_mc_dprc dprc.1: No more resources of type dpmcp left
1271[    2.886634] mmcblk1boot1: mmc1:0001 DF4064 partition 2 4.00 MiB
1272[    2.893147] fsl_mc_dprc dprc.1: No more resources of type dpmcp left
1273[    2.898830] mmcblk1rpmb: mmc1:0001 DF4064 partition 3 4.00 MiB, chardev (236:0)
1274[    2.906749] usb 3-1: new high-speed USB device number 2 using xhci-hcd
1275[    2.958214] ptp_qoriq: device tree node missing required elements, try automatic configuration
1276[    2.966892] pps pps0: new PPS source ptp0
1277[    2.977612] fsl_mc_dpio dpio.15: probed
1278[    2.977770] hub 3-1:1.0: USB hub found
1279[    2.985215] hub 3-1:1.0: 4 ports detected
1280[    2.988699] fsl_mc_dpio dpio.14: probed
1281[    3.000187] fsl_mc_dpio dpio.13: probed
1282[    3.011168] fsl_mc_dpio dpio.12: probed
1283[    3.022137] fsl_mc_dpio dpio.11: probed
1284[    3.033112] fsl_mc_dpio dpio.10: probed
1285[    3.044093] fsl_mc_dpio dpio.9: probed
1286[    3.055054] fsl_mc_dpio dpio.8: probed
1287[    3.066013] fsl_mc_dpio dpio.7: probed
1288[    3.066774] usb 4-1: new SuperSpeed Gen 1 USB device number 2 using xhci-hcd
1289[    3.076993] fsl_mc_dpio dpio.6: probed
1290[    3.087958] fsl_mc_dpio dpio.5: probed
1291[    3.098853] fsl_mc_dpio dpio.4: probed
1292[    3.109782] fsl_mc_dpio dpio.3: probed
1293[    3.120728] fsl_mc_dpio dpio.2: probed
1294[    3.121751] hub 4-1:1.0: USB hub found
1295[    3.128238] hub 4-1:1.0: 4 ports detected
1296[    3.131726] fsl_mc_dpio dpio.1: probed
1297[    3.143186] fsl_mc_dpio dpio.0: probed
1298[    3.152174] fsl_mc_dprc dprc.1: DPRC device bound to driver
1299[    3.309194] libphy: Freescale XGMAC MDIO Bus: probed
1300[    3.314362] fsl_dpaa2_eth dpni.0 (unnamed net_device) (uninitialized): PHY [8b96000:01] driver [Generic PHY] (irq=POLL)
1301[    3.325516] fsl_dpaa2_eth dpni.0: Probed interface eth0
1302[    3.326750] usb 3-1.3: new high-speed USB device number 3 using xhci-hcd
1303[    3.332310] dpaa2_caam dpseci.0: dpseci v5.3
1304[    3.364924] fsl_mc_dprc dprc.1 (unnamed net_device) (uninitialized): netif_napi_add() called with weight 512
1305[    3.390336] dpaa2_caam dpseci.0: algorithms registered in /proc/crypto
1306[    3.393715] hub 3-1.3:1.0: USB hub found
1307[    3.398129] dpaa2_caam dpseci.0: hash algorithms registered in /proc/crypto
1308[    3.400796] hub 3-1.3:1.0: 4 ports detected
1309[    3.407952] hctosys: unable to open rtc device (rtc0)
1310[    3.462268] EXT4-fs (nvme0n1p1): mounted filesystem with ordered data mode. Opts: (null)
1311[    3.470374] VFS: Mounted root (ext4 filesystem) on device 259:1.
1312[    3.477433] devtmpfs: mounted
1313[    3.481515] Freeing unused kernel memory: 5056K
1314[    3.486143] Run /sbin/init as init process
1315[    3.499343] random: fast init done
1316[    3.536083] systemd[1]: System time before build time, advancing clock.
1317[    3.556074] NET: Registered protocol family 10
1318[    3.560953] Segment Routing with IPv6
1319[    3.570765] systemd[1]: systemd 242 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN2 -IDN +PCRE2 default-hierarchy=hybrid)
1320[    3.592334] systemd[1]: Detected architecture arm64.
1321[    3.627775] systemd[1]: Set hostname to <clearfog>.
1322[    3.633218] systemd[1]: Failed to bump fs.file-max, ignoring: Invalid argument
1323[    3.642097] systemd[1]: Couldn't move remaining userspace processes, ignoring: Input/output error
1324[    3.682033] systemd[1]: File /lib/systemd/system/systemd-journald.service:12 configures an IP firewall (IPAddressDeny=any), but the local system does not support BPF/cgroup based firewalling.
1325[    3.699088] systemd[1]: Proceeding WITHOUT firewalling in effect! (This warning is only shown for the first loaded unit using IP firewalling.)
1326[    3.739716] systemd[1]: /lib/systemd/system/dbus.socket:4: ListenStream= references a path below legacy directory /var/run/, updating /var/run/dbus/system_bus_socket → /run/dbus/system_bus_socket; please update the unit file accordingly.
1327[    3.775198] systemd[1]: /lib/systemd/system/fancontrol.service:9: PIDFile= references a path below legacy directory /var/run/, updating /var/run/fancontrol.pid → /run/fancontrol.pid; please update the unit file accordingly.
1328[    3.813419] systemd[1]: /lib/systemd/system/docker.socket:5: ListenStream= references a path below legacy directory /var/run/, updating /var/run/docker.sock → /run/docker.sock; please update the unit file accordingly.
1329[    3.836910] random: systemd: uninitialized urandom read (16 bytes read)
1330[    3.858786] random: systemd: uninitialized urandom read (16 bytes read)
1331[    3.878768] random: systemd: uninitialized urandom read (16 bytes read)
1332[    4.127018] amc6821 4-0018: Revision 3
1333[    4.767412] systemd-journald[459]: Received request to flush runtime journal from PID 1
1334[    4.768770] systemd-journald[459]: File /var/log/journal/29883e7d302743278f020f7e24e45c8d/system.journal corrupted or uncleanly shut down, renaming and replacing.
1335[    4.834897] i40e: Intel(R) Ethernet Connection XL710 Network Driver - version 2.8.20-k
1336[    4.834901] i40e: Copyright (c) 2013 - 2019 Intel Corporation.
1337[    4.869289] i40e 0001:01:00.0: fw 6.0.48442 api 1.7 nvm 6.01 0x80003483 1.1747.0 [8086:1572] [8086:0008]
1338[    4.997106] fsl_dpaa2_eth dpni.0 eth0: configuring for phy/rgmii-id link mode
1339[    5.016268] i40e 0001:01:00.0: MAC address: 68:05:ca:34:90:f0
1340[    5.016579] i40e 0001:01:00.0: FW LLDP is enabled
1341[    5.024401] i40e 0001:01:00.0: PCI-Express: Speed 5.0GT/s Width x8
1342[    5.024406] i40e 0001:01:00.0: PCI-Express bandwidth available for this device may be insufficient for optimal performance.
1343[    5.024408] i40e 0001:01:00.0: Please move the device to a different PCI-e link with more lanes and/or higher transfer rate.
1344[    5.024845] i40e 0001:01:00.0: Features: PF-id[0] VFs: 64 VSIs: 66 QP: 16 RSS FD_ATR FD_SB NTUPLE VxLAN Geneve PTP VEPA
1345[    5.040048] i40e 0001:01:00.1: fw 6.0.48442 api 1.7 nvm 6.01 0x80003483 1.1747.0 [8086:1572] [8086:0000]
1346[    5.162366] i40e 0001:01:00.1: MAC address: 68:05:ca:34:90:f1
1347[    5.162661] i40e 0001:01:00.1: FW LLDP is enabled
1348[    5.168442] i40e 0001:01:00.1: PCI-Express: Speed 5.0GT/s Width x8
1349[    5.168446] i40e 0001:01:00.1: PCI-Express bandwidth available for this device may be insufficient for optimal performance.
1350[    5.168448] i40e 0001:01:00.1: Please move the device to a different PCI-e link with more lanes and/or higher transfer rate.
1351[    5.168884] i40e 0001:01:00.1: Features: PF-id[1] VFs: 64 VSIs: 66 QP: 16 RSS FD_ATR FD_SB NTUPLE VxLAN Geneve PTP VEPA
1352[    5.173028] i40e 0001:01:00.1 enP1p1s0f1: renamed from eth2
1353[    5.222892] i40e 0001:01:00.0 enP1p1s0f0: renamed from eth1
1354[    8.178752] random: crng init done
1355[    8.178755] random: 7 urandom warning(s) missed due to ratelimiting
1356[    9.077018] fsl_dpaa2_eth dpni.0 eth0: Link is Up - 1Gbps/Full - flow control off
1357[    9.077066] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
1358[   36.407339] VFIO - User Level meta-driver version: 0.3
1359[   50.647700] i40e 0001:01:00.0: FW LLDP is enabled
1360[   50.647706] i40e 0001:01:00.0: Allocating 1 VFs.
1361[   50.754900] pci 0001:02:02.0: [8086:154c] type 00 class 0x020000
1362[   50.754949] pci 0001:02:02.0: enabling Extended Tags
1363[   50.755233] OF: /soc/pcie@3800000: no msi-map translation for rid 0x210 on (null)
1364[   50.764624] iavf: Intel(R) Ethernet Adaptive Virtual Function Network Driver - version 3.2.3-k
1365[   50.764629] Copyright (c) 2013 - 2018 Intel Corporation.
1366[   50.764830] OF: /soc/pcie@3800000: no iommu-map translation for rid 0x210 on (null)
1367[   50.764864] iavf 0001:02:02.0: enabling device (0000 -> 0002)
1368[   50.767894] iavf 0001:02:02.0: Device is still in reset (-16), retrying
1369[   50.882678] i40e 0001:01:00.0: Setting MAC 68:ca:34:90:f0:00 on VF 0
1370[   50.975053] i40e 0001:01:00.0: Bring down and up the VF interface to make this change effective.
1371[   51.079651] i40e 0001:01:00.0: VF 0 is now trusted
1372[   51.794909] arm-smmu 5000000.iommu: Unhandled context fault: fsr=0x402, iova=0x2367c71000, fsynr=0x30001, cbfrsynra=0x2800, cb=3
1373[   51.830783] iavf 0001:02:02.0: Admin queue command never completed
1374[   52.850887] arm-smmu 5000000.iommu: Unhandled context fault: fsr=0x402, iova=0x236d672000, fsynr=0x30001, cbfrsynra=0x2800, cb=3
1375[   52.886782] iavf 0001:02:02.0: Admin queue command never completed
1376[   53.906889] arm-smmu 5000000.iommu: Unhandled context fault: fsr=0x402, iova=0x235aea7000, fsynr=0x30001, cbfrsynra=0x2800, cb=3
1377[   53.942754] iavf 0001:02:02.0: Admin queue command never completed
1378[   54.962881] arm-smmu 5000000.iommu: Unhandled context fault: fsr=0x402, iova=0x235b651000, fsynr=0x30001, cbfrsynra=0x2800, cb=3
1379[   54.998778] iavf 0001:02:02.0: Admin queue command never completed
1380[   56.018907] arm-smmu 5000000.iommu: Unhandled context fault: fsr=0x402, iova=0x2361daa000, fsynr=0x30001, cbfrsynra=0x2800, cb=3
1381[   56.054756] iavf 0001:02:02.0: Admin queue command never completed
1382[   57.074895] arm-smmu 5000000.iommu: Unhandled context fault: fsr=0x402, iova=0x2362d87000, fsynr=0x30001, cbfrsynra=0x2800, cb=3
1383[   57.110775] iavf 0001:02:02.0: Admin queue command never completed
1384[   58.130898] arm-smmu 5000000.iommu: Unhandled context fault: fsr=0x402, iova=0x2356072000, fsynr=0x30001, cbfrsynra=0x2800, cb=3
1385[   58.166774] iavf 0001:02:02.0: Admin queue command never completed
1386[   59.186878] arm-smmu 5000000.iommu: Unhandled context fault: fsr=0x402, iova=0x2361f06000, fsynr=0x30001, cbfrsynra=0x2800, cb=3
1387[   59.222782] iavf 0001:02:02.0: Admin queue command never completed
1388[   60.242874] arm-smmu 5000000.iommu: Unhandled context fault: fsr=0x402, iova=0x235ad76000, fsynr=0x30001, cbfrsynra=0x2800, cb=3
1389[   60.278755] iavf 0001:02:02.0: Admin queue command never completed
1390[   61.298880] arm-smmu 5000000.iommu: Unhandled context fault: fsr=0x402, iova=0x2362d8f000, fsynr=0x30001, cbfrsynra=0x2800, cb=3
1391[   61.334775] iavf 0001:02:02.0: Admin queue command never completed
1392[   62.354904] arm-smmu 5000000.iommu: Unhandled context fault: fsr=0x402, iova=0x235aee4000, fsynr=0x30001, cbfrsynra=0x2800, cb=3
1393[   62.390779] iavf 0001:02:02.0: Admin queue command never completed
1394[   63.410892] arm-smmu 5000000.iommu: Unhandled context fault: fsr=0x402, iova=0x236d70a000, fsynr=0x30001, cbfrsynra=0x2800, cb=3
1395[   63.446786] iavf 0001:02:02.0: Admin queue command never completed
1396[   64.466879] arm-smmu 5000000.iommu: Unhandled context fault: fsr=0x402, iova=0x2361e4f000, fsynr=0x30001, cbfrsynra=0x2800, cb=3
1397[   64.502780] iavf 0001:02:02.0: Admin queue command never completed
1398[   65.522900] arm-smmu 5000000.iommu: Unhandled context fault: fsr=0x402, iova=0x23616fd000, fsynr=0x30001, cbfrsynra=0x2800, cb=3
1399[   65.558772] iavf 0001:02:02.0: Admin queue command never completed
1400[   66.578883] arm-smmu 5000000.iommu: Unhandled context fault: fsr=0x402, iova=0x2361daa000, fsynr=0x30001, cbfrsynra=0x2800, cb=3
1401[   66.614758] iavf 0001:02:02.0: Admin queue command never completed
1402[   67.634871] arm-smmu 5000000.iommu: Unhandled context fault: fsr=0x402, iova=0x23616fd000, fsynr=0x30001, cbfrsynra=0x2800, cb=3
1403[   67.670752] iavf 0001:02:02.0: Admin queue command never completed
1404[   68.690889] arm-smmu 5000000.iommu: Unhandled context fault: fsr=0x402, iova=0x2363743000, fsynr=0x30001, cbfrsynra=0x2800, cb=3
1405[   68.726772] iavf 0001:02:02.0: Admin queue command never completed
1406[   69.746893] arm-smmu 5000000.iommu: Unhandled context fault: fsr=0x402, iova=0x2363574000, fsynr=0x30001, cbfrsynra=0x2800, cb=3
1407[   69.782781] iavf 0001:02:02.0: Admin queue command never completed
1408[   70.802880] arm-smmu 5000000.iommu: Unhandled context fault: fsr=0x402, iova=0x2361daa000, fsynr=0x30001, cbfrsynra=0x2800, cb=3
1409[   70.838745] iavf 0001:02:02.0: Admin queue command never completed
1410[   71.858882] arm-smmu 5000000.iommu: Unhandled context fault: fsr=0x402, iova=0x2367dc4000, fsynr=0x30001, cbfrsynra=0x2800, cb=3
1411[   71.894781] iavf 0001:02:02.0: Admin queue command never completed
1412[   71.901027] iavf 0001:02:02.0: Failed to communicate with PF; waiting before retry
1413[   77.010959] arm-smmu 5000000.iommu: Unhandled context fault: fsr=0x402, iova=0x23616fd000, fsynr=0x30001, cbfrsynra=0x2800, cb=3
1414[   77.046840] iavf 0001:02:02.0: Admin queue command never completed
1415[   77.053034] iavf 0001:02:02.0: Failed to communicate with PF; waiting before retry
1416[   82.131156] arm-smmu 5000000.iommu: Unhandled context fault: fsr=0x402, iova=0x235ae3c000, fsynr=0x30001, cbfrsynra=0x2800, cb=3
1417[   82.167021] iavf 0001:02:02.0: Admin queue command never completed
1418[   82.173212] iavf 0001:02:02.0: Failed to communicate with PF; waiting before retry
1419[   84.377671] OF: /soc/pcie@3800000: no iommu-map translation for rid 0x210 on (null)
1420[   84.377710] vfio-pci: probe of 0001:02:02.0 failed with error -22