· 6 years ago · Feb 05, 2020, 01:52 PM
1[ 0.000000] Booting Linux on physical CPU 0x0000000000 [0x410fd030]
2[ 0.000000] Linux version 5.5.0-rc7-postmarketos-qcom-msm8916 (pmos@amethyst) (gcc version 9.2.0 (Alpine 9.2.0)) #8 SMP PREEMPT Sun Feb 2 06:07:57 UTC 2020
3[ 0.000000] Machine model: Motorola Moto G4 Play (harpia)
4[ 0.000000] earlycon: msm_serial_dm0 at MMIO 0x00000000078af000 (options '')
5[ 0.000000] printk: bootconsole [msm_serial_dm0] enabled
6[ 0.000000] cma: Reserved 32 MiB at 0x00000000fe000000
7[ 0.000000] On node 0 totalpages: 497152
8[ 0.000000] DMA zone: 3672 pages used for memmap
9[ 0.000000] DMA zone: 0 pages reserved
10[ 0.000000] DMA zone: 235008 pages, LIFO batch:63
11[ 0.000000] DMA32 zone: 4096 pages used for memmap
12[ 0.000000] DMA32 zone: 262144 pages, LIFO batch:63
13[ 0.000000] percpu: Embedded 21 pages/cpu s48600 r8192 d29224 u86016
14[ 0.000000] pcpu-alloc: s48600 r8192 d29224 u86016 alloc=21*4096
15[ 0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3
16[ 0.000000] Detected VIPT I-cache on CPU0
17[ 0.000000] CPU features: detected: ARM errata 826319, 827319, 824069, 819472
18[ 0.000000] CPU features: detected: ARM erratum 845719
19[ 0.000000] CPU features: detected: ARM erratum 843419
20[ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 489384
21[ 0.000000] Kernel command line: earlycon=msm_serial_dm,0x78af000 console=ttyMSM0,115200,n8 PMOS_NO_OUTPUT_REDIRECT androidboot.emmc=true androidboot.serialno=7d1ff2be androidboot.baseband=msm
22[ 0.000000] Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes, linear)
23[ 0.000000] Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes, linear)
24[ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off
25[ 0.000000] software IO TLB: mapped [mem 0xbbfff000-0xbffff000] (64MB)
26[ 0.000000] Memory: 1832888K/1988608K available (6718K kernel code, 558K rwdata, 2620K rodata, 1408K init, 305K bss, 122952K reserved, 32768K cma-reserved)
27[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
28[ 0.000000] rcu: Preemptible hierarchical RCU implementation.
29[ 0.000000] Tasks RCU enabled.
30[ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies.
31[ 0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0
32[ 0.000000] random: get_random_bytes called from start_kernel+0x2b8/0x43c with crng_init=0
33[ 0.000000] arch_timer: cp15 and mmio timer(s) running at 19.20MHz (virt/virt).
34[ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x46d987e47, max_idle_ns: 440795202767 ns
35[ 0.000004] sched_clock: 56 bits at 19MHz, resolution 52ns, wraps every 4398046511078ns
36[ 0.011093] Console: colour dummy device 80x25
37[ 0.018777] Calibrating delay loop (skipped), value calculated using timer frequency.. 38.40 BogoMIPS (lpj=76800)
38[ 0.023274] pid_max: default: 32768 minimum: 301
39[ 0.033699] LSM: Security Framework initializing
40[ 0.038354] Mount-cache hash table entries: 4096 (order: 3, 32768 bytes, linear)
41[ 0.042903] Mountpoint-cache hash table entries: 4096 (order: 3, 32768 bytes, linear)
42[ 0.074366] ASID allocator initialised with 32768 entries
43[ 0.082361] rcu: Hierarchical SRCU implementation.
44[ 0.098402] smp: Bringing up secondary CPUs ...
45[ 0.130810] Detected VIPT I-cache on CPU1
46[ 0.130861] CPU1: Booted secondary processor 0x0000000001 [0x410fd030]
47[ 0.162830] Detected VIPT I-cache on CPU2
48[ 0.162873] CPU2: Booted secondary processor 0x0000000002 [0x410fd030]
49[ 0.194879] Detected VIPT I-cache on CPU3
50[ 0.194918] CPU3: Booted secondary processor 0x0000000003 [0x410fd030]
51[ 0.195005] smp: Brought up 1 node, 4 CPUs
52[ 0.225426] SMP: Total of 4 processors activated.
53[ 0.229502] CPU features: detected: 32-bit EL0 Support
54[ 0.234290] CPU features: detected: CRC32 instructions
55[ 0.246643] CPU: All CPU(s) started at EL1
56[ 0.246682] alternatives: patching kernel code
57[ 0.250763] devtmpfs: initialized
58[ 0.264524] KASLR disabled due to lack of seed
59[ 0.264872] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
60[ 0.267885] futex hash table entries: 1024 (order: 4, 65536 bytes, linear)
61[ 0.278963] pinctrl core: initialized pinctrl subsystem
62[ 0.285033] thermal_sys: Registered thermal governor 'step_wise'
63[ 0.286126] NET: Registered protocol family 16
64[ 0.302955] DMA: preallocated 256 KiB pool for atomic allocations
65[ 0.303011] audit: initializing netlink subsys (disabled)
66[ 0.308188] audit: type=2000 audit(0.256:1): state=initialized audit_enabled=0 res=1
67[ 0.313438] cpuidle: using governor menu
68[ 0.321483] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers.
69[ 0.343575] HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages
70[ 0.343603] HugeTLB registered 32.0 MiB page size, pre-allocated 0 pages
71[ 0.349352] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
72[ 0.356028] HugeTLB registered 64.0 KiB page size, pre-allocated 0 pages
73[ 0.364980] cryptd: max_cpu_qlen set to 1000
74[ 0.374324] iommu: Default domain type: Translated
75[ 0.374619] SCSI subsystem initialized
76[ 0.378378] usbcore: registered new interface driver usbfs
77[ 0.382091] usbcore: registered new interface driver hub
78[ 0.387611] usbcore: registered new device driver usb
79[ 0.393196] pps_core: LinuxPPS API ver. 1 registered
80[ 0.397953] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
81[ 0.403002] PTP clock support registered
82[ 0.413539] clocksource: Switched to clocksource arch_sys_counter
83[ 0.416227] VFS: Disk quotas dquot_6.6.0
84[ 0.422060] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
85[ 0.432616] NET: Registered protocol family 2
86[ 0.433087] tcp_listen_portaddr_hash hash table entries: 1024 (order: 2, 16384 bytes, linear)
87[ 0.437155] TCP established hash table entries: 16384 (order: 5, 131072 bytes, linear)
88[ 0.445768] TCP bind hash table entries: 16384 (order: 6, 262144 bytes, linear)
89[ 0.453743] TCP: Hash tables configured (established 16384 bind 16384)
90[ 0.460743] UDP hash table entries: 1024 (order: 3, 32768 bytes, linear)
91[ 0.467285] UDP-Lite hash table entries: 1024 (order: 3, 32768 bytes, linear)
92[ 0.474264] NET: Registered protocol family 1
93[ 0.481326] Unpacking initramfs...
94[ 0.649607] Freeing initrd memory: 4880K
95[ 0.650189] hw perfevents: enabled with armv8_cortex_a53 PMU driver, 7 counters available
96[ 0.655462] Initialise system trusted keyrings
97[ 0.660806] workingset: timestamp_bits=46 max_order=19 bucket_order=0
98[ 0.691595] Key type asymmetric registered
99[ 0.691616] Asymmetric key parser 'x509' registered
100[ 0.694625] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 248)
101[ 0.699364] io scheduler mq-deadline registered
102[ 0.706994] io scheduler kyber registered
103[ 0.717043] msm_serial 78af000.serial: msm_serial: detected port #0
104[ 0.717089] msm_serial 78af000.serial: uartclk = 7372800
105[ 0.722158] 78af000.serial: ttyMSM0 at MMIO 0x78af000 (irq = 9, base_baud = 460800) is a MSM
106[ 0.727695] msm_serial: console setup on port #0
107[ 0.736151] printk: console [ttyMSM0] enabled
108[ 0.739489] printk: bootconsole [msm_serial_dm0] disabled
109[ 0.749648] msm_serial: driver initialized
110[ 0.754849] qcom-iommu 1ef0000.iommu: iommu sec: pgtable size: 94208
111[ 0.769507] loop: module loaded
112[ 0.770069] spmi spmi-0: PMIC arbiter version v2 (0x20010000)
113[ 0.776160] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
114[ 0.777416] usbcore: registered new interface driver usb-storage
115[ 0.797839] rtc-pm8xxx 200f000.spmi:pm8916@0:rtc@6000: registered as rtc0
116[ 0.798000] i2c /dev entries driver
117[ 0.803848] i2c_qup 78b6000.i2c: using default clock-frequency 100000
118[ 0.806915] i2c_qup 78b6000.i2c:
119 tx channel not available
120[ 0.814161] i2c_qup 78b8000.i2c: using default clock-frequency 100000
121[ 0.820285] i2c_qup 78b8000.i2c:
122 tx channel not available
123[ 0.828469] input: pm8941_pwrkey as /devices/platform/soc/200f000.spmi/spmi-0/0-00/200f000.spmi:pm8916@0:pon@800/200f000.spmi:pm8916@0:pon@800:pwrkey/input/input0
124[ 0.834882] input: pm8941_pwrkey as /devices/platform/soc/200f000.spmi/spmi-0/0-00/200f000.spmi:pm8916@0:pon@800/200f000.spmi:pm8916@0:pon@800:volume-down/input/input1
125[ 0.850066] device-mapper: ioctl: 4.41.0-ioctl (2019-09-16) initialised: dm-devel@redhat.com
126[ 0.865225] sdhci: Secure Digital Host Controller Interface driver
127[ 0.871767] sdhci: Copyright(c) Pierre Ossman
128[ 0.877733] sdhci-pltfm: SDHCI platform and OF driver helper
129[ 0.883404] sdhci_msm 7864900.sdhci: Got CD GPIO
130[ 0.888878] ledtrig-cpu: registered to indicate activity on CPUs
131[ 0.894055] usbcore: registered new interface driver usbhid
132[ 0.898484] usbhid: USB HID core driver
133[ 0.905207] NET: Registered protocol family 17
134[ 0.907990] registered taskstats version 1
135[ 0.912117] Loading compiled-in X.509 certificates
136[ 0.936839] s1: supplied by regulator-dummy
137[ 0.936888] s1: Bringing 0uV into 500000-500000uV
138[ 0.940323] s2: supplied by regulator-dummy
139[ 0.945322] debugfs: Directory '4a9000.thermal-sensor' with parent 'tsens' already present!
140[ 0.949841] s3: supplied by regulator-dummy
141[ 0.957695] sdhci_msm 7864900.sdhci: Got CD GPIO
142[ 0.961334] s3: Bringing 0uV into 1200000-1200000uV
143[ 0.966523] s4: supplied by regulator-dummy
144[ 0.970954] s4: Bringing 0uV into 1800000-1800000uV
145[ 0.972270] sdhci_msm 7864900.sdhci: Got CD GPIO
146[ 0.974973] l1: supplied by s3
147[ 0.981268] input: GPIO Buttons as /devices/platform/soc/soc:gpio-keys/input/input2
148[ 0.984559] l1: Bringing 0uV into 1225000-1225000uV
149[ 0.988819] sdhci_msm 7864900.sdhci: Got CD GPIO
150[ 0.995114] l2: supplied by s3
151[ 1.004665] rtc-pm8xxx 200f000.spmi:pm8916@0:rtc@6000: setting system clock to 1970-01-01T03:49:15 UTC (13755)
152[ 1.004699] l2: Bringing 0uV into 1200000-1200000uV
153[ 1.017754] l3: supplied by s3
154[ 1.022326] l3: Bringing 0uV into 500000-500000uV
155[ 1.025643] l4: supplied by s4
156[ 1.025693] l4: Bringing 0uV into 2050000-2050000uV
157[ 1.026023] Freeing unused kernel memory: 1408K
158[ 1.027721] l5: supplied by s4
159[ 1.032212] l5: Bringing 0uV into 1800000-1800000uV
160[ 1.035450] l6: supplied by s4
161[ 1.040105] l6: Bringing 0uV into 1800000-1800000uV
162[ 1.043370] l7: supplied by s4
163[ 1.048010] l7: Bringing 0uV into 1800000-1800000uV
164[ 1.051284] l8: supplied by regulator-dummy
165[ 1.055908] l8: Bringing 0uV into 2850000-2850000uV
166[ 1.060210] l9: supplied by regulator-dummy
167[ 1.064935] l9: Bringing 0uV into 3300000-3300000uV
168[ 1.069247] l10: supplied by regulator-dummy
169[ 1.073961] l10: Bringing 0uV into 2800000-2800000uV
170[ 1.078620] l11: supplied by regulator-dummy
171[ 1.083424] l11: Bringing 0uV into 1800000-1800000uV
172[ 1.087815] l12: supplied by regulator-dummy
173[ 1.092625] l12: Bringing 0uV into 1800000-1800000uV
174[ 1.097028] l13: supplied by regulator-dummy
175[ 1.101829] l13: Bringing 0uV into 3075000-3075000uV
176[ 1.106217] l14: supplied by regulator-dummy
177[ 1.111031] l14: Bringing 0uV into 1800000-1800000uV
178[ 1.115424] l15: supplied by regulator-dummy
179[ 1.120230] l15: Bringing 0uV into 1800000-1800000uV
180[ 1.124631] l16: supplied by regulator-dummy
181[ 1.129451] l16: Bringing 0uV into 3100000-3100000uV
182[ 1.133852] l17: supplied by regulator-dummy
183[ 1.138640] l17: Bringing 0uV into 2850000-2850000uV
184[ 1.141932] Run /init as init process
185[ 1.143041] l18: supplied by regulator-dummy
186[ 1.151411] l18: Bringing 0uV into 2700000-2700000uV
187[ 1.184952] mmc0: SDHCI controller on 7824900.sdhci [7824900.sdhci] using ADMA 64-bit
188[ 1.187693] sdhci_msm 7864900.sdhci: Got CD GPIO
189[ 1.225925] mmc1: SDHCI controller on 7864900.sdhci [7864900.sdhci] using ADMA 64-bit
190[ 1.263900] mmc0: new HS200 MMC card at address 0001
191[ 1.268571] mmcblk0: mmc0:0001 QE13MB 14.6 GiB
192[ 1.268840] mmcblk0boot0: mmc0:0001 QE13MB partition 1 4.00 MiB
193[ 1.272446] mmcblk0boot1: mmc0:0001 QE13MB partition 2 4.00 MiB
194[ 1.278245] mmcblk0rpmb: mmc0:0001 QE13MB partition 3 4.00 MiB, chardev (246:0)
195[ 1.291650] mmcblk0: p1 p2 p3 p4 p5 p6 p7 p8 p9 p10 p11 p12 p13 p14 p15 p16 p17 p18 p19 p20 p21 p22 p23 p24 p25 p26 p27 p28 p29 p30 p31 p32 p33 p34 p35 p36 p37 p38 p39 p40 p41
196[ 1.368570] random: fast init done
197[ 2.041471] using random self ethernet address
198[ 2.046301] using random host ethernet address
199[ 2.061304] usb0: HOST MAC a2:b4:4a:38:f1:be
200[ 2.061452] usb0: MAC ca:f4:02:a4:49:01
201[ 2.065992] l13: voltage operation not allowed
202[ 2.229191] EXT4-fs (dm-0): mounting ext2 file system using the ext4 subsystem
203[ 2.231088] EXT4-fs (dm-0): mounted filesystem without journal. Opts: (null)
204[ 3.967604] EXT4-fs (dm-1): mounted filesystem with ordered data mode. Opts: (null)
205[ 6.118725] udevd[969]: starting version 3.2.9
206[ 6.124876] random: udevd: uninitialized urandom read (16 bytes read)
207[ 6.125412] random: udevd: uninitialized urandom read (16 bytes read)
208[ 6.125466] random: udevd: uninitialized urandom read (16 bytes read)
209[ 6.152869] udevd[969]: starting eudev-3.2.9
210[ 6.305867] mc: Linux media interface: v0.10
211[ 6.390474] input: pm8xxx_vib_ffmemless as /devices/platform/soc/200f000.spmi/spmi-0/0-01/200f000.spmi:pm8916@1:vibrator@c000/input/input3
212[ 6.525134] spmi-temp-alarm 200f000.spmi:pm8916@0:temp-alarm@2400: failed to register sensor
213[ 6.912385] qcom-wcnss-pil a204000.wcnss: a204000.wcnss supply vddcx not found, using dummy regulator
214[ 6.912830] NET: Registered protocol family 10
215[ 6.922582] Segment Routing with IPv6
216[ 6.938101] videodev: Linux video capture interface: v2.00
217[ 6.964456] NET: Registered protocol family 42
218[ 6.965449] remoteproc remoteproc0: a204000.wcnss is available
219[ 6.967188] remoteproc remoteproc0: powering up a204000.wcnss
220[ 6.967201] remoteproc remoteproc0: Booting fw image wcnss.mdt, size 7260
221[ 6.967745] remoteproc remoteproc1: 4080000.hexagon is available
222[ 7.038042] rmi4_i2c 0-0020: registering I2C-connected sensor
223[ 7.132518] qcom-msm8916-qdsp6 7702000.sound: MultiMedia1: error getting cpu dai name
224[ 7.132528] qcom-msm8916-qdsp6 7702000.sound: Error parsing device tree: -517
225[ 7.133729] qcom-msm8916-qdsp6 7702000.sound: MultiMedia1: error getting cpu dai name
226[ 7.133739] qcom-msm8916-qdsp6 7702000.sound: Error parsing device tree: -517
227[ 7.190554] apq8016-lpass-cpu 7708000.lpass: asoc_qcom_lpass_cpu_platform_probe() error getting optional mi2s-osr-clk0: -2
228[ 7.190594] apq8016-lpass-cpu 7708000.lpass: asoc_qcom_lpass_cpu_platform_probe() error getting optional mi2s-osr-clk1: -2
229[ 7.190618] apq8016-lpass-cpu 7708000.lpass: asoc_qcom_lpass_cpu_platform_probe() error getting optional mi2s-osr-clk2: -2
230[ 7.190634] apq8016-lpass-cpu 7708000.lpass: asoc_qcom_lpass_cpu_platform_probe() error getting optional mi2s-osr-clk3: -2
231[ 7.192130] qcom-msm8916-qdsp6 7702000.sound: MultiMedia1: error getting cpu dai name
232[ 7.192140] qcom-msm8916-qdsp6 7702000.sound: Error parsing device tree: -517
233[ 7.207430] rmi4_f01 rmi4-00.fn01: found RMI device, manufacturer: Synaptics, product: Harpia, fw id: 2323763
234[ 7.210099] qcom-venus 1d00000.video-codec: Adding to iommu group 0
235[ 7.210102] qcom-msm8916-qdsp6 7702000.sound: MultiMedia1: error getting cpu dai name
236[ 7.210110] qcom-msm8916-qdsp6 7702000.sound: Error parsing device tree: -517
237[ 7.220044] qcom-msm8916-qdsp6 7702000.sound: MultiMedia1: error getting cpu dai name
238[ 7.220053] qcom-msm8916-qdsp6 7702000.sound: Error parsing device tree: -517
239[ 7.233996] input: Synaptics Harpia as /devices/rmi4-00/input/input4
240[ 7.239660] qcom-msm8916-qdsp6 7702000.sound: MultiMedia1: error getting cpu dai name
241[ 7.239670] qcom-msm8916-qdsp6 7702000.sound: Error parsing device tree: -517
242[ 7.240591] qcom-msm8916-qdsp6 7702000.sound: MultiMedia1: error getting cpu dai name
243[ 7.240599] qcom-msm8916-qdsp6 7702000.sound: Error parsing device tree: -517
244[ 7.372873] qcom-msm8916-qdsp6 7702000.sound: MultiMedia1: error getting cpu dai name
245[ 7.372883] qcom-msm8916-qdsp6 7702000.sound: Error parsing device tree: -517
246[ 7.422318] qcom-msm8916-qdsp6 7702000.sound: MultiMedia1: error getting cpu dai name
247[ 7.422328] qcom-msm8916-qdsp6 7702000.sound: Error parsing device tree: -517
248[ 7.449443] remoteproc remoteproc0: remote processor a204000.wcnss is now up
249[ 7.450279] qcom-msm8916-qdsp6 7702000.sound: MultiMedia1: error getting cpu dai name
250[ 7.450288] qcom-msm8916-qdsp6 7702000.sound: Error parsing device tree: -517
251[ 7.451615] qcom-msm8916-qdsp6 7702000.sound: MultiMedia1: error getting cpu dai name
252[ 7.451624] qcom-msm8916-qdsp6 7702000.sound: Error parsing device tree: -517
253[ 7.461253] qcom-msm8916-qdsp6 7702000.sound: MultiMedia1: error getting cpu dai name
254[ 7.461263] qcom-msm8916-qdsp6 7702000.sound: Error parsing device tree: -517
255[ 7.582192] qcom_wcnss_ctrl remoteproc0:smd-edge.WCNSS_CTRL.-1.-1: WCNSS Version 1.5 1.2
256[ 7.582726] qcom-msm8916-qdsp6 7702000.sound: MultiMedia1: error getting cpu dai name
257[ 7.582736] qcom-msm8916-qdsp6 7702000.sound: Error parsing device tree: -517
258[ 8.013662] adreno 1c00000.gpu: Adding to iommu group 1
259[ 8.014616] qcom-msm8916-qdsp6 7702000.sound: MultiMedia1: error getting cpu dai name
260[ 8.014626] qcom-msm8916-qdsp6 7702000.sound: Error parsing device tree: -517
261[ 8.015647] msm_mdp 1a01000.mdp: Adding to iommu group 2
262[ 8.015748] msm_mdp 1a01000.mdp: No interconnect support may cause display underflows!
263[ 8.016461] qcom-msm8916-qdsp6 7702000.sound: MultiMedia1: error getting cpu dai name
264[ 8.016469] qcom-msm8916-qdsp6 7702000.sound: Error parsing device tree: -517
265[ 8.018927] qcom-msm8916-qdsp6 7702000.sound: MultiMedia1: error getting cpu dai name
266[ 8.018935] qcom-msm8916-qdsp6 7702000.sound: Error parsing device tree: -517
267[ 8.019953] qcom-msm8916-qdsp6 7702000.sound: MultiMedia1: error getting cpu dai name
268[ 8.019962] qcom-msm8916-qdsp6 7702000.sound: Error parsing device tree: -517
269[ 8.020680] msm 1a00000.mdss: 1a00000.mdss supply vdd not found, using dummy regulator
270[ 8.021171] msm_mdp 1a01000.mdp: [drm:mdp5_bind [msm]] MDP5 version v1.6
271[ 8.021316] msm 1a00000.mdss: bound 1a01000.mdp (ops mdp5_ops [msm])
272[ 8.021391] msm_dsi 1a98000.dsi: 1a98000.dsi supply gdsc not found, using dummy regulator
273[ 8.021645] msm_dsi 1a98000.dsi: 1a98000.dsi supply gdsc not found, using dummy regulator
274[ 8.022111] msm_dsi_manager_register: failed to register mipi dsi host for DSI 0
275[ 8.022468] msm 1a00000.mdss: failed to bind 1a98000.dsi (ops dsi_ops [msm]): -517
276[ 8.022613] msm 1a00000.mdss: master bind failed: -517
277[ 8.022735] platform 1a01000.mdp: Removing from iommu group 2
278[ 8.022778] ------------[ cut here ]------------
279[ 8.022791] WARNING: CPU: 3 PID: 1015 at drivers/iommu/qcom_iommu.c:348 qcom_iommu_domain_free+0x5c/0x70
280[ 8.022794] Modules linked in: msm(+) wcnss_ctrl qrtr_smd venus_dec venus_enc videobuf2_dma_sg videobuf2_memops venus_core snd_soc_lpass_apq8016 drm_kms_helper snd_soc_lpass_cpu snd_soc_lpass_platform snd_soc_msm8916_digital snd_soc_msm8916_qdsp6 v4l2_mem2mem snd_soc_qcom_common snd_soc_msm8916_analog videobuf2_v4l2 syscopyarea snd_soc_core sysfillrect videobuf2_common qrtr sysimgblt fb_sys_fops rmi_i2c qcom_q6v5_mss bma180 videodev qcom_wcnss_pil ipv6 rmi_core industrialio_triggered_buffer qcom_common drm kfifo_buf snd_compress qcom_glink_smem snd_pcm qcom_glink_native snd_timer qcom_sysmon snd qmi_helpers qcom_spmi_vadc qcom_vadc_common qcom_spmi_temp_alarm nf_defrag_ipv6 pm8xxx_vibrator industrialio qcom_q6v5 soundcore mc drm_panel_orientation_quirks mdt_loader rmtfs_mem
281[ 8.022886] CPU: 3 PID: 1015 Comm: udevd Not tainted 5.5.0-rc7-postmarketos-qcom-msm8916 #8
282[ 8.022889] Hardware name: Motorola Moto G4 Play (harpia) (DT)
283[ 8.022893] pstate: 00000005 (nzcv daif -PAN -UAO)
284[ 8.022898] pc : qcom_iommu_domain_free+0x5c/0x70
285[ 8.022905] lr : iommu_group_release+0x48/0x80
286[ 8.022907] sp : ffff800010d835c0
287[ 8.022910] x29: ffff800010d835c0 x28: ffff800013e01000
288[ 8.022915] x27: 0000000000000100 x26: ffff800010146940
289[ 8.022921] x25: ffff0000707f5180 x24: 0000000000000003
290[ 8.022926] x23: ffff000079cee010 x22: ffff00007955d558
291[ 8.022932] x21: ffff000071b54200 x20: ffff000071b54080
292[ 8.022937] x19: ffff00007955d500 x18: 0000000000000001
293[ 8.022943] x17: 0000000000000000 x16: 0000000000000000
294[ 8.022948] x15: 0000000000000004 x14: ffff800010ba5108
295[ 8.022953] x13: 0000000000000000 x12: ffff000079af63e8
296[ 8.022959] x11: ffff000079af6238 x10: 0000000000000000
297[ 8.022964] x9 : ffff00007d41ed18 x8 : ffff00007d41ed10
298[ 8.022970] x7 : 0000000040040000 x6 : 0000000000210d00
299[ 8.022975] x5 : ffff00007d6c0250 x4 : 0000000000000000
300[ 8.022980] x3 : 0000000000000000 x2 : 0000000000000000
301[ 8.022985] x1 : ffff00007d5bc080 x0 : ffff000071b540b0
302[ 8.022991] Call trace:
303[ 8.022996] qcom_iommu_domain_free+0x5c/0x70
304[ 8.023001] iommu_group_release+0x48/0x80
305[ 8.023008] kobject_put+0x94/0x228
306[ 8.023013] kobject_del+0x50/0x68
307[ 8.023017] kobject_put+0x7c/0x228
308[ 8.023024] iommu_group_remove_device+0xd8/0xe8
309[ 8.023028] qcom_iommu_remove_device+0x44/0x60
310[ 8.023032] iommu_release_device+0x28/0x40
311[ 8.023037] iommu_bus_notifier+0xac/0xc0
312[ 8.023044] notifier_call_chain+0x58/0x98
313[ 8.023050] blocking_notifier_call_chain+0x54/0x78
314[ 8.023056] device_del+0x26c/0x398
315[ 8.023062] platform_device_del.part.0+0x18/0x88
316[ 8.023067] platform_device_unregister+0x20/0x38
317[ 8.023073] of_platform_device_destroy+0xdc/0xf0
318[ 8.023078] device_for_each_child+0x58/0xa0
319[ 8.023083] of_platform_depopulate+0x38/0x78
320[ 8.023200] msm_pdev_probe+0x1c0/0x308 [msm]
321[ 8.023207] platform_drv_probe+0x50/0xa0
322[ 8.023212] really_probe+0xd8/0x428
323[ 8.023216] driver_probe_device+0xdc/0x130
324[ 8.023220] device_driver_attach+0x6c/0x78
325[ 8.023224] __driver_attach+0x9c/0x168
326[ 8.023230] bus_for_each_dev+0x6c/0xc0
327[ 8.023234] driver_attach+0x20/0x28
328[ 8.023240] bus_add_driver+0x138/0x218
329[ 8.023244] driver_register+0x60/0x110
330[ 8.023249] __platform_driver_register+0x44/0x50
331[ 8.023357] msm_drm_register+0x54/0x68 [msm]
332[ 8.023363] do_one_initcall+0x50/0x190
333[ 8.023369] do_init_module+0x50/0x208
334[ 8.023373] load_module+0x1eb8/0x2498
335[ 8.023377] __do_sys_init_module+0x200/0x2b8
336[ 8.023382] __arm64_sys_init_module+0x18/0x20
337[ 8.023389] el0_svc_common.constprop.0+0x68/0x160
338[ 8.023394] el0_svc_handler+0x20/0x80
339[ 8.023400] el0_sync_handler+0x10c/0x180
340[ 8.023404] el0_sync+0x140/0x180
341[ 8.023409] ---[ end trace 67737e27878a7674 ]---
342[ 8.025207] qcom-msm8916-qdsp6 7702000.sound: MultiMedia1: error getting cpu dai name
343[ 8.025216] qcom-msm8916-qdsp6 7702000.sound: Error parsing device tree: -517
344[ 8.026042] msm_mdp 1a01000.mdp: Adding to iommu group 2
345[ 8.026140] msm_mdp 1a01000.mdp: No interconnect support may cause display underflows!
346[ 8.028945] qcom-msm8916-qdsp6 7702000.sound: MultiMedia1: error getting cpu dai name
347[ 8.028953] qcom-msm8916-qdsp6 7702000.sound: Error parsing device tree: -517
348[ 8.029486] msm 1a00000.mdss: 1a00000.mdss supply vdd not found, using dummy regulator
349[ 8.030271] msm_mdp 1a01000.mdp: [drm:mdp5_bind [msm]] MDP5 version v1.6
350[ 8.030688] msm 1a00000.mdss: bound 1a01000.mdp (ops mdp5_ops [msm])
351[ 8.030846] msm_dsi 1a98000.dsi: 1a98000.dsi supply gdsc not found, using dummy regulator
352[ 8.031149] msm_dsi 1a98000.dsi: 1a98000.dsi supply gdsc not found, using dummy regulator
353[ 8.031908] msm_dsi_manager_register: failed to register mipi dsi host for DSI 0
354[ 8.032586] msm 1a00000.mdss: failed to bind 1a98000.dsi (ops dsi_ops [msm]): -517
355[ 8.032863] msm 1a00000.mdss: master bind failed: -517
356[ 8.724910] EXT4-fs (dm-1): re-mounted. Opts: data=ordered
357[ 8.819140] EXT4-fs (dm-0): mounting ext2 file system using the ext4 subsystem
358[ 8.820947] EXT4-fs (dm-0): mounted filesystem without journal. Opts: (null)
359[ 8.820971] ext2 filesystem being mounted at /boot supports timestamps until 2038 (0x7fffffff)
360[ 9.240900] remoteproc remoteproc1: powering up 4080000.hexagon
361[ 9.243443] remoteproc remoteproc1: Booting fw image mba.mbn, size 230272
362[ 9.301607] qcom-q6v5-mss 4080000.hexagon: MBA booted, loading mpss
363[ 9.450608] cfg80211: Loading compiled-in X.509 certificates for regulatory database
364[ 9.462217] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
365[ 9.462436] platform regulatory.0: Direct firmware load for regulatory.db failed with error -2
366[ 9.462443] cfg80211: failed to load regulatory.db
367[ 9.529692] Bluetooth: Core ver 2.22
368[ 9.529920] NET: Registered protocol family 31
369[ 9.529933] Bluetooth: HCI device and connection manager initialized
370[ 9.529962] Bluetooth: HCI socket layer initialized
371[ 9.529974] Bluetooth: L2CAP socket layer initialized
372[ 9.530021] Bluetooth: SCO socket layer initialized
373[ 9.549142] urandom_read: 5 callbacks suppressed
374[ 9.549156] random: dbus-daemon: uninitialized urandom read (12 bytes read)
375[ 9.576941] qcom-msm8916-qdsp6 7702000.sound: MultiMedia1: error getting cpu dai name
376[ 9.576951] qcom-msm8916-qdsp6 7702000.sound: Error parsing device tree: -517
377[ 9.577666] msm 1a00000.mdss: 1a00000.mdss supply vdd not found, using dummy regulator
378[ 9.578130] msm_mdp 1a01000.mdp: [drm:mdp5_bind [msm]] MDP5 version v1.6
379[ 9.578275] msm 1a00000.mdss: bound 1a01000.mdp (ops mdp5_ops [msm])
380[ 9.578364] msm_dsi 1a98000.dsi: 1a98000.dsi supply gdsc not found, using dummy regulator
381[ 9.579353] msm_dsi 1a98000.dsi: 1a98000.dsi supply gdsc not found, using dummy regulator
382[ 9.580354] msm 1a00000.mdss: bound 1a98000.dsi (ops dsi_ops [msm])
383[ 9.580702] adreno 1c00000.gpu: 1c00000.gpu supply vdd not found, using dummy regulator
384[ 9.580774] adreno 1c00000.gpu: 1c00000.gpu supply vddcx not found, using dummy regulator
385[ 9.580932] msm 1a00000.mdss: [drm:msm_gpu_init [msm]] A306: using IOMMU
386[ 9.581239] msm 1a00000.mdss: bound 1c00000.gpu (ops a3xx_ops [msm])
387[ 9.600976] msm 1a00000.mdss: fall back to the other CTL category for INTF 1!
388[ 9.601972] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
389[ 9.601976] [drm] Driver supports precise vblank timestamp query.
390[ 9.602754] [drm] Initialized msm 1.5.0 20130625 for 1a00000.mdss on minor 0
391[ 9.616506] msm 1a00000.mdss: [drm:adreno_request_fw [msm]] loaded qcom/a300_pm4.fw from new location
392[ 9.624188] msm 1a00000.mdss: [drm:adreno_request_fw [msm]] loaded qcom/a300_pfp.fw from new location
393[ 9.662281] random: dbus-daemon: uninitialized urandom read (12 bytes read)
394[ 9.862129] [drm:mdp5_irq_error_handler [msm]] *ERROR* errors: 04000000
395[ 9.894849] Console: switching to colour frame buffer device 90x80
396[ 9.927552] msm 1a00000.mdss: fb0: msmdrmfb frame buffer device
397[ 9.954608] qcom-msm8916-qdsp6 7702000.sound: MultiMedia1: error getting cpu dai name
398[ 9.954617] qcom-msm8916-qdsp6 7702000.sound: Error parsing device tree: -517
399[ 10.103632] elogind-daemon[1619]: Failed to create inotify watch on /dev/null/utmp, ignoring: Not a directory
400[ 10.117378] elogind-daemon[1619]: New seat seat0.
401[ 10.123344] elogind-daemon[1619]: Watching system buttons on /dev/input/event0 (pm8941_pwrkey)
402[ 10.233779] elogind-daemon[1619]: Failed to set utmp path to /dev/null/utmp: Not supported
403[ 10.235377] wcn36xx: mac address: 02:00:7d:1f:f2:be
404[ 10.244031] qcom-msm8916-qdsp6 7702000.sound: MultiMedia1: error getting cpu dai name
405[ 10.244040] qcom-msm8916-qdsp6 7702000.sound: Error parsing device tree: -517
406[ 10.367262] wcn36xx: firmware WLAN version 'WCN v2.0 RadioPhy vRhea_GF_1.12 with 19.2MHz XO' and CRM version 'CNSS-PR-2-0-1-1-c1-00155'
407[ 10.367271] wcn36xx: firmware API 1.5.1.2, 41 stations, 2 bssids
408[ 10.385166] remoteproc remoteproc1: remote processor 4080000.hexagon is now up
409[ 10.386334] qcom-msm8916-qdsp6 7702000.sound: MultiMedia1: error getting cpu dai name
410[ 10.386345] qcom-msm8916-qdsp6 7702000.sound: Error parsing device tree: -517
411[ 10.390157] qcom-msm8916-qdsp6 7702000.sound: MultiMedia1: error getting cpu dai name
412[ 10.390167] qcom-msm8916-qdsp6 7702000.sound: Error parsing device tree: -517
413[ 10.741591] qcom-msm8916-qdsp6 7702000.sound: MultiMedia1: error getting cpu dai name
414[ 10.741601] qcom-msm8916-qdsp6 7702000.sound: Error parsing device tree: -517
415[ 10.794021] qcom,apr remoteproc1:smd-edge.apr_audio_svc.-1.-1: Adding APR dev: aprsvc:q6core:4:3
416[ 10.794242] qcom,apr remoteproc1:smd-edge.apr_audio_svc.-1.-1: Adding APR dev: aprsvc:q6afe:4:4
417[ 10.794354] qcom,apr remoteproc1:smd-edge.apr_audio_svc.-1.-1: Adding APR dev: aprsvc:q6asm:4:7
418[ 10.794461] qcom,apr remoteproc1:smd-edge.apr_audio_svc.-1.-1: Adding APR dev: aprsvc:q6adm:4:8
419[ 10.795423] qcom-msm8916-qdsp6 7702000.sound: MultiMedia1: error getting cpu dai name
420[ 10.795431] qcom-msm8916-qdsp6 7702000.sound: Error parsing device tree: -517
421[ 10.809876] qcom-msm8916-qdsp6 7702000.sound: MultiMedia1: error getting cpu dai name
422[ 10.809887] qcom-msm8916-qdsp6 7702000.sound: Error parsing device tree: -517
423[ 10.827396] qcom-msm8916-qdsp6 7702000.sound: MultiMedia1: error getting cpu dai name
424[ 10.827407] qcom-msm8916-qdsp6 7702000.sound: Error parsing device tree: -517
425[ 10.847047] qcom-msm8916-qdsp6 7702000.sound: MultiMedia1: error getting cpu dai name
426[ 10.847058] qcom-msm8916-qdsp6 7702000.sound: Error parsing device tree: -517
427[ 10.858055] qcom-msm8916-qdsp6 7702000.sound: MultiMedia1: error getting cpu dai name
428[ 10.858064] qcom-msm8916-qdsp6 7702000.sound: Error parsing device tree: -517
429[ 10.862828] elogind-daemon[1619]: Failed to create inotify watch on /dev/null/utmp, ignoring: Not a directory
430[ 10.863933] elogind-daemon[1619]: New session c1 of user user.
431[ 10.873079] elogind-daemon[1619]: Failed to apply ACLs: Not supported
432[ 10.887425] qcom-msm8916-qdsp6 7702000.sound: MultiMedia1: error getting cpu dai name
433[ 10.887444] qcom-msm8916-qdsp6 7702000.sound: Error parsing device tree: -517
434[ 10.896702] qcom-msm8916-qdsp6 7702000.sound: MultiMedia1: error getting cpu dai name
435[ 10.896711] qcom-msm8916-qdsp6 7702000.sound: Error parsing device tree: -517
436[ 10.912361] debugfs: Directory '4080000.hexagon:smd-edge:apr:q6' with parent 'msm8916' already present!
437[ 10.914548] qcom,pm8916-wcd-spmi-codec 200f000.spmi:pm8916@1:codec@f000: PMIC REV: 1 CODEC Version: 1
438[ 10.915432] qcom,pm8916-wcd-spmi-codec 200f000.spmi:pm8916@1:codec@f000: ASoC: sink widget PDM_RX1 overwritten
439[ 10.915671] qcom,pm8916-wcd-spmi-codec 200f000.spmi:pm8916@1:codec@f000: ASoC: source widget PDM_RX1 overwritten
440[ 10.915718] qcom,pm8916-wcd-spmi-codec 200f000.spmi:pm8916@1:codec@f000: ASoC: source widget PDM_RX1 overwritten
441[ 10.915745] qcom,pm8916-wcd-spmi-codec 200f000.spmi:pm8916@1:codec@f000: ASoC: sink widget PDM_RX1 overwritten
442[ 10.915776] qcom,pm8916-wcd-spmi-codec 200f000.spmi:pm8916@1:codec@f000: ASoC: sink widget PDM_RX1 overwritten
443[ 10.915808] qcom,pm8916-wcd-spmi-codec 200f000.spmi:pm8916@1:codec@f000: ASoC: sink widget ADC1 overwritten
444[ 10.915857] qcom,pm8916-wcd-spmi-codec 200f000.spmi:pm8916@1:codec@f000: ASoC: sink widget ADC1 overwritten
445[ 10.915899] qcom,pm8916-wcd-spmi-codec 200f000.spmi:pm8916@1:codec@f000: ASoC: sink widget PDM_RX1 overwritten
446[ 10.916441] qcom,pm8916-wcd-spmi-codec 200f000.spmi:pm8916@1:codec@f000: ASoC: source widget PDM_RX3 overwritten
447[ 10.916588] debugfs: Directory '4080000.hexagon:smd-edge:apr:q6' with parent 'msm8916' already present!
448[ 10.925338] qcom-msm8916-qdsp6 7702000.sound: snd-soc-dummy-dai <-> MultiMedia1 mapping ok
449[ 10.926441] qcom-msm8916-qdsp6 7702000.sound: snd-soc-dummy-dai <-> MultiMedia2 mapping ok
450[ 10.927739] qcom-msm8916-qdsp6 7702000.sound: snd-soc-dummy-dai <-> MultiMedia3 mapping ok
451[ 10.927815] qcom-msm8916-qdsp6 7702000.sound: multicodec <-> PRI_MI2S_RX mapping ok
452[ 10.927840] qcom-msm8916-qdsp6 7702000.sound: multicodec <-> TERT_MI2S_TX mapping ok
453[ 10.976589] input: msm8916 Headset Jack as /devices/platform/soc/7702000.sound/sound/card0/input5
454[ 10.981824] elogind-uaccess-command[1660]: Failed to apply ACL on /dev/dri/card0: Not supported
455[ 10.981856] elogind-uaccess-command[1660]: Failed to reset ACL on /dev/dri/card0: Not supported
456[ 10.986013] elogind-uaccess-command[1661]: Failed to apply ACL on /dev/snd/pcmC0D0c: Not supported
457[ 10.986050] elogind-uaccess-command[1661]: Failed to reset ACL on /dev/snd/pcmC0D0c: Not supported
458[ 10.989361] elogind-uaccess-command[1663]: Failed to apply ACL on /dev/snd/pcmC0D2p: Not supported
459[ 10.989401] elogind-uaccess-command[1663]: Failed to reset ACL on /dev/snd/pcmC0D2p: Not supported
460[ 10.993352] elogind-uaccess-command[1665]: Failed to apply ACL on /dev/snd/pcmC0D2c: Not supported
461[ 10.993387] elogind-uaccess-command[1665]: Failed to reset ACL on /dev/snd/pcmC0D2c: Not supported
462[ 10.994931] elogind-uaccess-command[1667]: Failed to apply ACL on /dev/snd/controlC0: Not supported
463[ 10.994965] elogind-uaccess-command[1667]: Failed to reset ACL on /dev/snd/controlC0: Not supported
464[ 10.994980] elogind-uaccess-command[1662]: Failed to apply ACL on /dev/snd/pcmC0D1c: Not supported
465[ 10.995053] elogind-uaccess-command[1662]: Failed to reset ACL on /dev/snd/pcmC0D1c: Not supported
466[ 10.996866] elogind-uaccess-command[1666]: Failed to apply ACL on /dev/snd/pcmC0D1p: Not supported
467[ 10.996901] elogind-uaccess-command[1666]: Failed to reset ACL on /dev/snd/pcmC0D1p: Not supported
468[ 10.998607] elogind-uaccess-command[1668]: Failed to apply ACL on /dev/snd/pcmC0D0p: Not supported
469[ 10.998649] elogind-uaccess-command[1668]: Failed to reset ACL on /dev/snd/pcmC0D0p: Not supported
470[ 11.143578] random: crng init done
471[ 11.482764] rfkill: input handler disabled
472[ 11.669664] Bluetooth: hci0: command 0xfc0b tx timeout
473[ 21.880007] q6asm-dai 4080000.hexagon:smd-edge:apr:q6asm:dais: command[0x10dac] not expecting rsp
474[ 21.880024] q6asm-dai 4080000.hexagon:smd-edge:apr:q6asm:dais: command[0x10dac] not expecting rsp
475[ 21.880036] q6asm-dai 4080000.hexagon:smd-edge:apr:q6asm:dais: command[0x10dac] not expecting rsp
476[ 21.880047] q6asm-dai 4080000.hexagon:smd-edge:apr:q6asm:dais: command[0x10dac] not expecting rsp
477[ 509.002260] rpmsg_chrdev remoteproc1:smd-edge.rpmsg_chrdev.0.0: channel DATA5_CNTL is busy
478[ 509.002271] rpmsg rpmsg0: failed to open DATA5_CNTL
479[ 622.593619] [drm:mdp5_irq_error_handler [msm]] *ERROR* errors: 04000000