· 8 years ago · Jan 30, 2018, 05:18 PM
1<6>[ 0.000000] Initializing cgroup subsys cpuset
2<6>[ 0.000000] Initializing cgroup subsys cpu
3<6>[ 0.000000] Initializing cgroup subsys cpuacct
4<5>[ 0.000000] Linux version 3.18.31-perf-g79d883996 (dadi11@teamhorizon) (gcc version 4.9 20150123 (prerelease) (GCC) ) #1 SMP PREEMPT Sun Dec 17 18:13:14 CET 2017
5<4>[ 0.000000] CPU: AArch64 Processor [410fd034] revision 4
6<6>[ 0.000000] alternatives: enabling workaround for ARM erratum 845719
7<6>[ 0.000000] Machine: Qualcomm Technologies, Inc. MSM8953 QRD SKU3
8<6>[ 0.000000] efi: Getting EFI parameters from FDT:
9<6>[ 0.000000] efi: UEFI not found.
10<6>[ 0.000000] Reserved memory: reserved region for node 'other_ext_region@0': base 0x0000000084a00000, size 30 MiB
11<6>[ 0.000000] Reserved memory: reserved region for node 'modem_region@0': base 0x0000000086c00000, size 106 MiB
12<6>[ 0.000000] Reserved memory: reserved region for node 'adsp_fw_region@0': base 0x000000008d600000, size 17 MiB
13<6>[ 0.000000] Reserved memory: reserved region for node 'wcnss_fw_region@0': base 0x000000008e700000, size 7 MiB
14<6>[ 0.000000] Reserved memory: reserved region for node 'dfps_data_mem@90000000': base 0x0000000090000000, size 0 MiB
15<6>[ 0.000000] Reserved memory: reserved region for node 'splash_region@0x90001000': base 0x0000000090001000, size 19 MiB
16<6>[ 0.000000] Reserved memory: reserved region for node 'pstore_reserve_mem_region@0': base 0x000000009ff00000, size 1 MiB
17<6>[ 0.000000] Removed memory: created DMA memory pool at 0x0000000084a00000, size 30 MiB
18<6>[ 0.000000] Reserved memory: initialized node other_ext_region@0, compatible id removed-dma-pool
19<6>[ 0.000000] Removed memory: created DMA memory pool at 0x0000000086c00000, size 106 MiB
20<6>[ 0.000000] Reserved memory: initialized node modem_region@0, compatible id removed-dma-pool
21<6>[ 0.000000] Removed memory: created DMA memory pool at 0x000000008d600000, size 17 MiB
22<6>[ 0.000000] Reserved memory: initialized node adsp_fw_region@0, compatible id removed-dma-pool
23<6>[ 0.000000] Removed memory: created DMA memory pool at 0x000000008e700000, size 7 MiB
24<6>[ 0.000000] Reserved memory: initialized node wcnss_fw_region@0, compatible id removed-dma-pool
25<6>[ 0.000000] Reserved memory: allocated memory for 'venus_region@0' node: base 0x000000008f800000, size 8 MiB
26<6>[ 0.000000] Reserved memory: created CMA memory pool at 0x000000008f800000, size 8 MiB
27<6>[ 0.000000] Reserved memory: initialized node venus_region@0, compatible id shared-dma-pool
28<6>[ 0.000000] Reserved memory: allocated memory for 'secure_region@0' node: base 0x00000000f6800000, size 152 MiB
29<6>[ 0.000000] Reserved memory: created CMA memory pool at 0x00000000f6800000, size 152 MiB
30<6>[ 0.000000] Reserved memory: initialized node secure_region@0, compatible id shared-dma-pool
31<6>[ 0.000000] Reserved memory: allocated memory for 'qseecom_region@0' node: base 0x00000000f5800000, size 16 MiB
32<6>[ 0.000000] Reserved memory: created CMA memory pool at 0x00000000f5800000, size 16 MiB
33<6>[ 0.000000] Reserved memory: initialized node qseecom_region@0, compatible id shared-dma-pool
34<6>[ 0.000000] Reserved memory: allocated memory for 'adsp_region@0' node: base 0x00000000f5400000, size 4 MiB
35<6>[ 0.000000] Reserved memory: created CMA memory pool at 0x00000000f5400000, size 4 MiB
36<6>[ 0.000000] Reserved memory: initialized node adsp_region@0, compatible id shared-dma-pool
37<6>[ 0.000000] Reserved memory: allocated memory for 'gpu_region@0' node: base 0x000000008f000000, size 8 MiB
38<6>[ 0.000000] Reserved memory: created CMA memory pool at 0x000000008f000000, size 8 MiB
39<6>[ 0.000000] Reserved memory: initialized node gpu_region@0, compatible id shared-dma-pool
40<6>[ 0.000000] cma: Reserved 16 MiB at 0x00000000f4400000
41<7>[ 0.000000] On node 0 totalpages: 772608
42<7>[ 0.000000] DMA zone: 12288 pages used for memmap
43<7>[ 0.000000] DMA zone: 0 pages reserved
44<7>[ 0.000000] DMA zone: 772608 pages, LIFO batch:31
45<6>[ 0.000000] psci: probing for conduit method from DT.
46<6>[ 0.000000] psci: PSCIv1.0 detected in firmware.
47<6>[ 0.000000] psci: Using standard PSCI v0.2 function IDs
48<6>[ 0.000000] psci: Initializing psci_cpu_init
49<6>[ 0.000000] psci: Initializing psci_cpu_init
50<6>[ 0.000000] psci: Initializing psci_cpu_init
51<6>[ 0.000000] psci: Initializing psci_cpu_init
52<6>[ 0.000000] psci: Initializing psci_cpu_init
53<6>[ 0.000000] psci: Initializing psci_cpu_init
54<6>[ 0.000000] psci: Initializing psci_cpu_init
55<6>[ 0.000000] PERCPU: Embedded 13 pages/cpu @ffffffc0b41a2000 s21568 r0 d31680 u53248
56<7>[ 0.000000] pcpu-alloc: s21568 r0 d31680 u53248 alloc=13*4096
57<7>[ 0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 [0] 4 [0] 5 [0] 6 [0] 7
58<4>[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 760320
59<5>[ 0.000000] Kernel command line: sched_enable_hmp=1 sched_enable_power_aware=1 androidboot.hardware=qcom msm_rtb.filter=0x237 ehci-hcd.park=3 lpm_levels.sleep_disabled=1 androidboot.bootdevice=7824900.sdhci earlycon=msm_hsl_uart,0x78af000 androidboot.selinux=permissive buildvariant=userdebug androidboot.emmc=true androidboot.verifiedbootstate=orange androidboot.veritymode=enforcing androidboot.keymaster=1 androidboot.serialno=1cc0ccb29804 androidboot.boot_reason= androidboot.secureboot=1 gpt androidboot.baseband=msm mdss_mdp.panel=1:dsi:0:qcom,mdss_dsi_nt35596_tianma_fhd_video:1:none:cfg:single_dsi
60<4>[ 0.000000] zakk: booting_into_recovery=0
61<6>[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
62<6>[ 0.000000] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
63<6>[ 0.000000] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
64<4>[ 0.000000] Memory: 2637688K/3090432K available (15784K kernel code, 2016K rwdata, 6956K rodata, 928K init, 4360K bss, 452744K reserved)
65<5>[ 0.000000] Virtual kernel memory layout:
66<5>[ 0.000000] vmalloc : 0xffffff8000000000 - 0xffffffbdbfff0000 ( 246 GB)
67<5>[ 0.000000] vmemmap : 0xffffffbdc0000000 - 0xffffffbfc0000000 ( 8 GB maximum)
68<5>[ 0.000000] 0xffffffbdc0000000 - 0xffffffbdc3000000 ( 48 MB actual)
69<5>[ 0.000000] PCI I/O : 0xffffffbffa000000 - 0xffffffbffb000000 ( 16 MB)
70<5>[ 0.000000] fixed : 0xffffffbffbdfd000 - 0xffffffbffbdff000 ( 8 KB)
71<5>[ 0.000000] modules : 0xffffffbffc000000 - 0xffffffc000000000 ( 64 MB)
72<5>[ 0.000000] memory : 0xffffffc000000000 - 0xffffffc0c0000000 ( 3072 MB)
73<5>[ 0.000000] .init : 0xffffffc0016b8000 - 0xffffffc0017a0000 ( 928 KB)
74<5>[ 0.000000] .text : 0xffffffc000080000 - 0xffffffc0016b7324 ( 22749 KB)
75<5>[ 0.000000] .data : 0xffffffc0017bc000 - 0xffffffc0019b4000 ( 2016 KB)
76<6>[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
77<6>[ 0.000000] HMP scheduling enabled.
78<6>[ 0.000000] Preemptible hierarchical RCU implementation.
79<6>[ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
80<6>[ 0.000000] NR_IRQS:64 nr_irqs:64 0
81<4>[ 0.000000] mpm_init_irq_domain(): Cannot find irq controller for qcom,gpio-parent
82<3>[ 0.000000] MPM 1 irq mapping errored -517
83<6>[ 0.000000] Offload RCU callbacks from all CPUs
84<6>[ 0.000000] Offload RCU callbacks from CPUs: 0-7.
85<6>[ 0.000000] Architected cp15 and mmio timer(s) running at 19.20MHz (virt/virt).
86<6>[ 0.000006] sched_clock: 56 bits at 19MHz, resolution 52ns, wraps every 3579139424256ns
87<6>[ 0.000023] Switched to clocksource arch_sys_counter
88<6>[ 0.003557] allocated 12582912 bytes of page_cgroup
89<6>[ 0.003568] please try 'cgroup_disable=memory' option if you don't want memory cgroups
90<6>[ 0.003584] Calibrating delay loop (skipped), value calculated using timer frequency.. 38.40 BogoMIPS (lpj=192000)
91<6>[ 0.003597] pid_max: default: 32768 minimum: 301
92<6>[ 0.003700] Security Framework initialized
93<6>[ 0.003717] SELinux: Initializing.
94<7>[ 0.003764] SELinux: Starting in permissive mode
95<6>[ 0.003837] Mount-cache hash table entries: 8192 (order: 4, 65536 bytes)
96<6>[ 0.003850] Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes)
97<6>[ 0.004712] Initializing cgroup subsys memory
98<6>[ 0.004739] Initializing cgroup subsys freezer
99<6>[ 0.004773] ftrace: allocating 50776 entries in 199 pages
100<3>[ 0.134340] /cpus/cpu@0: Missing clock-frequency property
101<3>[ 0.134363] /cpus/cpu@1: Missing clock-frequency property
102<3>[ 0.134382] /cpus/cpu@2: Missing clock-frequency property
103<3>[ 0.134402] /cpus/cpu@3: Missing clock-frequency property
104<3>[ 0.134423] /cpus/cpu@100: Missing clock-frequency property
105<3>[ 0.134448] /cpus/cpu@101: Missing clock-frequency property
106<3>[ 0.134474] /cpus/cpu@102: Missing clock-frequency property
107<3>[ 0.134503] /cpus/cpu@103: Missing clock-frequency property
108<6>[ 0.134553] hw perfevents: enabled with arm/armv8-pmuv3 PMU driver, 7 counters available
109<6>[ 0.134593] EFI services will not be available.
110<4>[ 0.134771] NOHZ: local_softirq_pending 02
111<6>[ 0.140342] MSM Memory Dump base table set up
112<6>[ 0.140378] MSM Memory Dump apps data table set up
113<6>[ 0.140450] Configuring XPU violations to be fatal errors
114<6>[ 0.142725] cpu_clock_pwr_init: Power clocks configured
115<6>[ 0.158161] Brought up 8 CPUs
116<6>[ 0.158175] SMP: Total of 8 processors activated.
117<6>[ 0.158257] alternatives: patching kernel code
118<6>[ 0.162284] DMI not present or invalid.
119<6>[ 0.174450] pinctrl core: initialized pinctrl subsystem
120<6>[ 0.175029] regulator-dummy: no parameters
121<6>[ 0.251329] NET: Registered protocol family 16
122<6>[ 0.253716] ramoops: using module parameters
123<6>[ 0.255937] console [pstore0] enabled
124<6>[ 0.255978] pstore: Registered ramoops as persistent store backend
125<6>[ 0.255991] ramoops: attached 0x100000@0x9ff00000, ecc: 0/0
126<4>[ 0.256977] ------------[ cut here ]------------
127<4>[ 0.256996] WARNING: CPU: 0 PID: 1 at ../../../../../../kernel/xiaomi/mido/drivers/power/qcom/pm-boot.c:45 msm_pm_boot_init+0x90/0xd0()
128<4>[ 0.257013] CPU: 0 PID: 1 Comm: swapper/0 Not tainted 3.18.31-perf-g79d883996 #1
129<4>[ 0.257023] Hardware name: Qualcomm Technologies, Inc. MSM8953 QRD SKU3 (DT)
130<0>[ 0.257034] Call trace:
131<4>[ 0.257050] [<ffffffc00008a028>] dump_backtrace+0x0/0x24c
132<4>[ 0.257064] [<ffffffc00008a294>] show_stack+0x20/0x28
133<4>[ 0.257080] [<ffffffc000fd0aac>] dump_stack+0x80/0xa4
134<4>[ 0.257096] [<ffffffc0000a5194>] warn_slowpath_common+0x90/0xb8
135<4>[ 0.257111] [<ffffffc0000a5380>] warn_slowpath_null+0x38/0x44
136<4>[ 0.257124] [<ffffffc0016fd02c>] msm_pm_boot_init+0x90/0xd0
137<4>[ 0.257139] [<ffffffc0016b8b54>] do_one_initcall+0x188/0x1a4
138<4>[ 0.257153] [<ffffffc0016b8d40>] kernel_init_freeable+0x1d0/0x284
139<4>[ 0.257167] [<ffffffc000fca370>] kernel_init+0x20/0xe0
140<4>[ 0.257190] ---[ end trace 97fdc3d68b4b703f ]---
141<3>[ 0.257217] scm_call failed: func id 0x42000101, ret: -1, syscall returns: 0x0, 0x0, 0x0
142<6>[ 0.260148] cpuidle: using governor ladder
143<6>[ 0.280129] cpuidle: using governor menu
144<6>[ 0.300118] cpuidle: using governor qcom
145<6>[ 0.301549] vdso: 2 pages (1 code @ ffffffc0017c1000, 1 data @ ffffffc0017c0000)
146<6>[ 0.302433] software IO TLB [mem 0xeec00000-0xef000000] (4MB) mapped at [ffffffc0aec00000-ffffffc0aeffffff]
147<6>[ 0.303600] DMA: preallocated 256 KiB pool for atomic allocations
148<4>[ 0.311799] __of_mpm_init(): MPM driver mapping exists
149<6>[ 0.314786] platform soc:qcom,kgsl-hyp: assigned reserved memory node gpu_region@0
150<3>[ 0.342882] msm_mpm_dev_probe(): Cannot get clk resource for XO: -517
151<6>[ 0.348400] sps:sps is ready.
152<6>[ 0.351056] msm_thermal:vdd_restriction_reg_init Defer regulator vdd-dig probe
153<3>[ 0.351077] msm_thermal:probe_vdd_rstr Err regulator init. err:-517. KTM continues.
154<6>[ 0.351096] msm-thermal soc:qcom,msm-thermal: probe_vdd_rstr:Failed reading node=/soc/qcom,msm-thermal, key=qcom,max-freq-level. err=-517. KTM continues
155<3>[ 0.351111] msm_thermal:msm_thermal_dev_probe Failed reading node=/soc/qcom,msm-thermal, key=qcom,online-hotplug-core. err:-517
156<6>[ 0.354272] i2c-msm-v2 78b6000.i2c: probing driver i2c-msm-v2
157<3>[ 0.354455] i2c-msm-v2 78b6000.i2c: error on clk_get(core_clk):-517
158<3>[ 0.354473] i2c-msm-v2 78b6000.i2c: error probe() failed with err:-517
159<6>[ 0.355182] i2c-msm-v2 78b7000.i2c: probing driver i2c-msm-v2
160<3>[ 0.355347] i2c-msm-v2 78b7000.i2c: error on clk_get(core_clk):-517
161<3>[ 0.355363] i2c-msm-v2 78b7000.i2c: error probe() failed with err:-517
162<6>[ 0.356087] i2c-msm-v2 7af5000.i2c: probing driver i2c-msm-v2
163<3>[ 0.356252] i2c-msm-v2 7af5000.i2c: error on clk_get(core_clk):-517
164<3>[ 0.356268] i2c-msm-v2 7af5000.i2c: error probe() failed with err:-517
165<6>[ 0.358030] cpu-clock-8953 b114000.qcom,cpu-clock-8953: Speed bin: 2 PVS Version: 0
166<3>[ 0.358140] cpu-clock-8953 b114000.qcom,cpu-clock-8953: Get vdd-mx regulator!!!
167<4>[ 0.359484] msm_rpm_glink_dt_parse: qcom,rpm-glink compatible not matches
168<6>[ 0.359499] msm_rpm_dev_probe: APSS-RPM communication over SMD
169<3>[ 0.362121] smd_channel_probe_now: allocation table not initialized
170<3>[ 0.363594] smd_channel_probe_now: allocation table not initialized
171<3>[ 0.364754] smd_channel_probe_now: allocation table not initialized
172<6>[ 0.366642] msm_watchdog b017000.qcom,wdt: wdog absent resource not present
173<6>[ 0.367063] msm_watchdog b017000.qcom,wdt: MSM Watchdog Initialized
174<6>[ 0.368504] msm-sn-fuse a4128.snfuse: SN interface initialized
175<6>[ 0.375775] platform soc:qcom,adsprpc-mem: assigned reserved memory node adsp_region@0
176<3>[ 0.379363] spmi_pmic_arb 200f000.qcom,spmi: PMIC Arb Version-2 0x20010000
177<6>[ 0.382913] pm8953_s5: 400 <--> 1140 mV at 870 mV normal idle
178<6>[ 0.383313] pm8953_s5_avs_limit: 400 <--> 1140 mV
179<6>[ 0.383550] spm_regulator_probe: name=pm8953_s5, range=LV, voltage=870000 uV, mode=AUTO, step rate=1200 uV/us
180<6>[ 0.391511] platform 4080000.qcom,mss: assigned reserved memory node modem_region@0
181<6>[ 0.392140] platform c200000.qcom,lpass: assigned reserved memory node adsp_fw_region@0
182<6>[ 0.392501] platform 1de0000.qcom,venus: assigned reserved memory node venus_region@0
183<6>[ 0.393284] platform a21b000.qcom,pronto: assigned reserved memory node wcnss_fw_region@0
184<6>[ 0.396002] apc_mem_acc_corner: 0 <--> 0 mV
185<6>[ 0.397391] cpr4_msm8953_apss_read_fuse_data: apc_corner: speed bin = 2
186<6>[ 0.397407] cpr4_msm8953_apss_read_fuse_data: apc_corner: CPR fusing revision = 3
187<6>[ 0.397420] cpr4_msm8953_apss_read_fuse_data: apc_corner: foundry id = 2
188<6>[ 0.397433] cpr4_msm8953_apss_read_fuse_data: apc_corner: CPR misc fuse value = 0
189<6>[ 0.397471] cpr4_msm8953_apss_read_fuse_data: apc_corner: Voltage boost fuse config = 0 boost = disable
190<6>[ 0.397611] cpr4_msm8953_apss_calculate_open_loop_voltages: apc_corner: fused LowSVS: open-loop= 625000 uV
191<6>[ 0.397624] cpr4_msm8953_apss_calculate_open_loop_voltages: apc_corner: fused SVS: open-loop= 680000 uV
192<6>[ 0.397635] cpr4_msm8953_apss_calculate_open_loop_voltages: apc_corner: fused NOM: open-loop= 775000 uV
193<6>[ 0.397647] cpr4_msm8953_apss_calculate_open_loop_voltages: apc_corner: fused TURBO_L1: open-loop= 915000 uV
194<6>[ 0.397723] cpr4_msm8953_apss_calculate_target_quotients: apc_corner: fused LowSVS: quot[ 7]= 508
195<6>[ 0.397736] cpr4_msm8953_apss_calculate_target_quotients: apc_corner: fused SVS: quot[ 7]= 597, quot_offset[ 7]= 85
196<6>[ 0.397749] cpr4_msm8953_apss_calculate_target_quotients: apc_corner: fused NOM: quot[ 7]= 795, quot_offset[ 7]= 195
197<6>[ 0.397762] cpr4_msm8953_apss_calculate_target_quotients: apc_corner: fused TURBO_L1: quot[ 7]=1078, quot_offset[ 7]= 280
198<6>[ 0.398111] cpr4_apss_init_aging: apc: sensor 6 aging init quotient diff = 2, aging RO scale = 2800 QUOT/V
199<6>[ 0.398311] cpr3_regulator_init_ctrl: apc: Default CPR mode = HW closed-loop
200<6>[ 0.398488] apc_corner: 0 <--> 0 mV at 0 mV
201<6>[ 0.400005] gfx_mem_acc_corner: 0 <--> 0 mV
202<3>[ 0.400661] GFX_LDO: msm_gfx_ldo_parse_dt: Unable to parse CX parameters rc=-517
203<3>[ 0.400674] GFX_LDO: msm_gfx_ldo_probe: Unable to pasrse dt rc=-517
204<3>[ 0.419672] msm_mpm_dev_probe(): Cannot get clk resource for XO: -517
205<6>[ 0.420917] msm_thermal:sensor_mgr_init_threshold threshold id already initialized
206<6>[ 0.421085] msm_thermal:vdd_restriction_reg_init Defer regulator vdd-dig probe
207<3>[ 0.421098] msm_thermal:probe_vdd_rstr Err regulator init. err:-517. KTM continues.
208<6>[ 0.421116] msm-thermal soc:qcom,msm-thermal: probe_vdd_rstr:Failed reading node=/soc/qcom,msm-thermal, key=qcom,max-freq-level. err=-517. KTM continues
209<3>[ 0.421131] msm_thermal:msm_thermal_dev_probe Failed reading node=/soc/qcom,msm-thermal, key=qcom,online-hotplug-core. err:-517
210<6>[ 0.421494] i2c-msm-v2 78b6000.i2c: probing driver i2c-msm-v2
211<3>[ 0.421679] i2c-msm-v2 78b6000.i2c: error on clk_get(core_clk):-517
212<3>[ 0.421696] i2c-msm-v2 78b6000.i2c: error probe() failed with err:-517
213<6>[ 0.422051] i2c-msm-v2 78b7000.i2c: probing driver i2c-msm-v2
214<3>[ 0.422214] i2c-msm-v2 78b7000.i2c: error on clk_get(core_clk):-517
215<3>[ 0.422230] i2c-msm-v2 78b7000.i2c: error probe() failed with err:-517
216<6>[ 0.422591] i2c-msm-v2 7af5000.i2c: probing driver i2c-msm-v2
217<3>[ 0.422755] i2c-msm-v2 7af5000.i2c: error on clk_get(core_clk):-517
218<3>[ 0.422770] i2c-msm-v2 7af5000.i2c: error probe() failed with err:-517
219<6>[ 0.423105] cpu-clock-8953 b114000.qcom,cpu-clock-8953: Speed bin: 2 PVS Version: 0
220<3>[ 0.423214] cpu-clock-8953 b114000.qcom,cpu-clock-8953: Get vdd-mx regulator!!!
221<4>[ 0.423302] msm_rpm_glink_dt_parse: qcom,rpm-glink compatible not matches
222<6>[ 0.423316] msm_rpm_dev_probe: APSS-RPM communication over SMD
223<6>[ 0.424223] pm8953_s1: 870 <--> 1156 mV at 1000 mV normal idle
224<6>[ 0.425191] pm8953_s2_level: 0 <--> 0 mV at 0 mV normal idle
225<6>[ 0.425864] pm8953_s2_floor_level: 0 <--> 0 mV at 0 mV normal idle
226<6>[ 0.426495] pm8953_s2_level_ao: 0 <--> 0 mV at 0 mV normal idle
227<6>[ 0.427396] pm8953_s3: 1225 mV normal idle
228<6>[ 0.428261] pm8953_s4: 1900 <--> 2050 mV at 1900 mV normal idle
229<6>[ 0.429161] pm8953_s7_level: 0 <--> 0 mV at 0 mV normal idle
230<6>[ 0.429805] pm8953_s7_level_ao: 0 <--> 0 mV at 0 mV normal idle
231<6>[ 0.430508] pm8953_s7_level_so: 0 <--> 0 mV at 0 mV normal idle
232<6>[ 0.431372] pm8953_l1: 1000 mV normal idle
233<6>[ 0.432264] pm8953_l2: 975 <--> 1225 mV at 975 mV normal idle
234<6>[ 0.433140] pm8953_l3: 925 mV normal idle
235<6>[ 0.434045] pm8953_l5: 1800 mV normal idle
236<6>[ 0.434912] pm8953_l6: 1800 mV normal idle
237<6>[ 0.435799] pm8953_l7: 1800 <--> 1900 mV at 1800 mV normal idle
238<6>[ 0.436432] pm8953_l7_ao: 1800 <--> 1900 mV at 1800 mV normal idle
239<6>[ 0.437329] pm8953_l8: 2900 mV normal idle
240<6>[ 0.438199] pm8953_l9: 3000 <--> 3300 mV at 3000 mV normal idle
241<6>[ 0.439091] pm8953_l10: 2850 mV normal idle
242<6>[ 0.439955] pm8953_l11: 2950 mV normal idle
243<6>[ 0.440885] pm8953_l12: 1800 <--> 2950 mV at 1800 mV normal idle
244<6>[ 0.441741] pm8953_l13: 3125 mV normal idle
245<6>[ 0.442622] pm8953_l16: 1800 mV normal idle
246<6>[ 0.443490] pm8953_l17: 2850 mV normal idle
247<6>[ 0.444387] pm8953_l19: 1200 <--> 1350 mV at 1200 mV normal idle
248<6>[ 0.445249] pm8953_l22: 2800 mV normal idle
249<6>[ 0.446141] pm8953_l23: 975 <--> 1225 mV at 975 mV normal idle
250<6>[ 0.447076] GFX_LDO: msm_gfx_ldo_voltage_init: LDO corner 1: target-volt = 580000 uV
251<6>[ 0.447091] GFX_LDO: msm_gfx_ldo_voltage_init: LDO corner 2: target-volt = 650000 uV
252<6>[ 0.447104] GFX_LDO: msm_gfx_ldo_voltage_init: LDO corner 3: target-volt = 720000 uV
253<6>[ 0.447121] GFX_LDO: msm_gfx_ldo_adjust_init_voltage: adjusted the open-loop voltage[1] 580000 -> 615000
254<6>[ 0.447133] GFX_LDO: msm_gfx_ldo_adjust_init_voltage: adjusted the open-loop voltage[2] 650000 -> 675000
255<6>[ 0.447146] GFX_LDO: msm_gfx_ldo_voltage_init: LDO-mode fuse disabled by default
256<6>[ 0.447487] msm_gfx_ldo: 0 <--> 0 mV at 0 mV
257<3>[ 0.447864] msm_mpm_dev_probe(): Cannot get clk resource for XO: -517
258<6>[ 0.449052] msm_thermal:sensor_mgr_init_threshold threshold id already initialized
259<3>[ 0.449880] cpu cpu0: dev_pm_opp_get_opp_count: device OPP not found (-19)
260<3>[ 0.449895] msm_thermal:get_cpu_freq_plan_len Error reading CPU0 freq table len. error:-19
261<3>[ 0.449910] cpu cpu4: dev_pm_opp_get_opp_count: device OPP not found (-19)
262<3>[ 0.449922] msm_thermal:get_cpu_freq_plan_len Error reading CPU4 freq table len. error:-19
263<6>[ 0.449933] msm_thermal:vdd_restriction_reg_init Defer vdd rstr freq init.
264<3>[ 0.452243] cpu cpu0: dev_pm_opp_get_opp_count: device OPP not found (-19)
265<3>[ 0.452258] msm_thermal:get_cpu_freq_plan_len Error reading CPU0 freq table len. error:-19
266<3>[ 0.452273] cpu cpu4: dev_pm_opp_get_opp_count: device OPP not found (-19)
267<3>[ 0.452284] msm_thermal:get_cpu_freq_plan_len Error reading CPU4 freq table len. error:-19
268<3>[ 0.452298] cpu cpu0: dev_pm_opp_get_opp_count: device OPP not found (-19)
269<3>[ 0.452309] msm_thermal:get_cpu_freq_plan_len Error reading CPU0 freq table len. error:-19
270<3>[ 0.452323] cpu cpu4: dev_pm_opp_get_opp_count: device OPP not found (-19)
271<3>[ 0.452334] msm_thermal:get_cpu_freq_plan_len Error reading CPU4 freq table len. error:-19
272<6>[ 0.453008] i2c-msm-v2 78b6000.i2c: probing driver i2c-msm-v2
273<3>[ 0.453198] i2c-msm-v2 78b6000.i2c: error on clk_get(core_clk):-517
274<3>[ 0.453215] i2c-msm-v2 78b6000.i2c: error probe() failed with err:-517
275<6>[ 0.453595] i2c-msm-v2 78b7000.i2c: probing driver i2c-msm-v2
276<3>[ 0.453759] i2c-msm-v2 78b7000.i2c: error on clk_get(core_clk):-517
277<3>[ 0.453775] i2c-msm-v2 78b7000.i2c: error probe() failed with err:-517
278<6>[ 0.454139] i2c-msm-v2 7af5000.i2c: probing driver i2c-msm-v2
279<3>[ 0.454303] i2c-msm-v2 7af5000.i2c: error on clk_get(core_clk):-517
280<3>[ 0.454319] i2c-msm-v2 7af5000.i2c: error probe() failed with err:-517
281<4>[ 0.484950] ------------[ cut here ]------------
282<4>[ 0.484989] WARNING: CPU: 3 PID: 6 at ../../../../../../kernel/xiaomi/mido/drivers/clk/msm/clock-local2.c:1005 branch_clk_handoff+0x7c/0xc0()
283<4>[ 0.485001] gcc_usb_phy_cfg_ahb_clk clock is enabled in HW even though ENABLE_BIT is not set
284<4>[ 0.485018] CPU: 3 PID: 6 Comm: kworker/u16:0 Tainted: G W 3.18.31-perf-g79d883996 #1
285<4>[ 0.485029] Hardware name: Qualcomm Technologies, Inc. MSM8953 QRD SKU3 (DT)
286<4>[ 0.485049] Workqueue: deferwq deferred_probe_work_func
287<0>[ 0.485063] Call trace:
288<4>[ 0.485080] [<ffffffc00008a028>] dump_backtrace+0x0/0x24c
289<4>[ 0.485094] [<ffffffc00008a294>] show_stack+0x20/0x28
290<4>[ 0.485111] [<ffffffc000fd0aac>] dump_stack+0x80/0xa4
291<4>[ 0.485127] [<ffffffc0000a5194>] warn_slowpath_common+0x90/0xb8
292<4>[ 0.485142] [<ffffffc0000a5278>] warn_slowpath_fmt+0x88/0xac
293<4>[ 0.485155] [<ffffffc000c9b834>] branch_clk_handoff+0x7c/0xc0
294<4>[ 0.485169] [<ffffffc000c978c8>] __handoff_clk+0xd0/0x2e4
295<4>[ 0.485182] [<ffffffc000c9839c>] msm_clock_register+0x184/0x248
296<4>[ 0.485195] [<ffffffc000c984f0>] of_msm_clock_register+0x90/0xa0
297<4>[ 0.485209] [<ffffffc000ca88a8>] msm_gcc_probe+0x120/0x214
298<4>[ 0.485224] [<ffffffc0005fa538>] platform_drv_probe+0x44/0x90
299<4>[ 0.485237] [<ffffffc0005f89fc>] driver_probe_device+0xdc/0x22c
300<4>[ 0.485251] [<ffffffc0005f8b80>] __device_attach+0x34/0x54
301<4>[ 0.485265] [<ffffffc0005f73dc>] bus_for_each_drv+0x98/0xc8
302<4>[ 0.485279] [<ffffffc0005f8cb8>] device_attach+0x78/0xa4
303<4>[ 0.485292] [<ffffffc0005f75c8>] bus_probe_device+0x38/0xac
304<4>[ 0.485306] [<ffffffc0005f83d0>] deferred_probe_work_func+0x7c/0xa8
305<4>[ 0.485321] [<ffffffc0000bc4d8>] process_one_work+0x264/0x440
306<4>[ 0.485336] [<ffffffc0000bc9e0>] worker_thread+0x32c/0x448
307<4>[ 0.485350] [<ffffffc0000c210c>] kthread+0xf4/0xfc
308<4>[ 0.485360] ---[ end trace 97fdc3d68b4b7040 ]---
309<6>[ 0.488017] qcom,gcc-8953 1800000.qcom,gcc: Registered GCC clocks
310<6>[ 0.488299] cpu-clock-8953 b114000.qcom,cpu-clock-8953: Speed bin: 2 PVS Version: 0
311<3>[ 0.491364] cpu-clock-8953 b114000.qcom,cpu-clock-8953: missing qcom,dfs-sid-c0
312<3>[ 0.491383] cpu-clock-8953 b114000.qcom,cpu-clock-8953: No DFS SID tables found for Cluster-0
313<3>[ 0.491399] cpu-clock-8953 b114000.qcom,cpu-clock-8953: missing qcom,link-sid-c0
314<3>[ 0.491412] cpu-clock-8953 b114000.qcom,cpu-clock-8953: No Link SID tables found for Cluster-0
315<3>[ 0.491427] cpu-clock-8953 b114000.qcom,cpu-clock-8953: missing qcom,lmh-sid-c0
316<3>[ 0.491440] cpu-clock-8953 b114000.qcom,cpu-clock-8953: No LMH SID tables found for Cluster-0
317<3>[ 0.491451] ramp_lmh_sid: Use Default LMH SID
318<3>[ 0.491460] ramp_dfs_sid: Use Default DFS SID
319<3>[ 0.491469] ramp_link_sid: Use Default Link SID
320<3>[ 0.491528] cpu-clock-8953 b114000.qcom,cpu-clock-8953: missing qcom,dfs-sid-c1
321<3>[ 0.491541] cpu-clock-8953 b114000.qcom,cpu-clock-8953: No DFS SID tables found for Cluster-1
322<3>[ 0.491556] cpu-clock-8953 b114000.qcom,cpu-clock-8953: missing qcom,link-sid-c1
323<3>[ 0.491569] cpu-clock-8953 b114000.qcom,cpu-clock-8953: No Link SID tables found for Cluster-1
324<3>[ 0.491584] cpu-clock-8953 b114000.qcom,cpu-clock-8953: missing qcom,lmh-sid-c1
325<3>[ 0.491597] cpu-clock-8953 b114000.qcom,cpu-clock-8953: No LMH SID tables found for Cluster-1
326<3>[ 0.491607] ramp_lmh_sid: Use Default LMH SID
327<3>[ 0.491616] ramp_dfs_sid: Use Default DFS SID
328<3>[ 0.491625] ramp_link_sid: Use Default Link SID
329<6>[ 0.491700] clock_rcgwr_init: RCGwR Init Completed
330<6>[ 0.492273] populate_opp_table: clock-cpu-8953: OPP tables populated (cpu 3 and 7)
331<6>[ 0.492287] print_opp_table: clock_cpu: a53 C0: OPP voltage for 652800000: 1
332<6>[ 0.492297] print_opp_table: clock_cpu: a53 C0: OPP voltage for 2016000000: 7
333<6>[ 0.492307] print_opp_table: clock_cpu: a53 C1: OPP voltage for 652800000: 1
334<6>[ 0.492317] print_opp_table: clock_cpu: a53 C2: OPP voltage for 2016000000: 7
335<6>[ 0.493580] i2c-msm-v2 78b6000.i2c: probing driver i2c-msm-v2
336<3>[ 0.493806] AXI: msm_bus_scale_register_client(): msm_bus_scale_register_client: Bus driver not ready.
337<6>[ 0.493821] i2c-msm-v2 78b6000.i2c: msm_bus_scale_register_client(mstr-id:86):0 (not a problem)
338<6>[ 0.494788] i2c-msm-v2 78b7000.i2c: probing driver i2c-msm-v2
339<3>[ 0.495000] AXI: msm_bus_scale_register_client(): msm_bus_scale_register_client: Bus driver not ready.
340<6>[ 0.495013] i2c-msm-v2 78b7000.i2c: msm_bus_scale_register_client(mstr-id:86):0 (not a problem)
341<6>[ 0.495297] i2c-msm-v2 78b7000.i2c: irq:176 when no active transfer
342<6>[ 0.496138] i2c-msm-v2 7af5000.i2c: probing driver i2c-msm-v2
343<3>[ 0.496353] AXI: msm_bus_scale_register_client(): msm_bus_scale_register_client: Bus driver not ready.
344<6>[ 0.496366] i2c-msm-v2 7af5000.i2c: msm_bus_scale_register_client(mstr-id:84):0 (not a problem)
345<6>[ 0.498613] gcc-gfx-8953 1800000.qcom,gcc-gfx: Registered GCC GFX clocks.
346<3>[ 0.562637] qcom,qpnp-pin qpnp-pin-17: qpnp_pin_probe: no device nodes specified in topology
347<4>[ 0.562668] qcom,qpnp-pin: probe of qpnp-pin-17 failed with error -22
348<3>[ 0.563259] msm_cpuss_dump soc:cpuss_dump: Couldn't get memory for dumping
349<3>[ 0.563283] msm_cpuss_dump soc:cpuss_dump: Couldn't get memory for dumping
350<6>[ 0.567059] KPI: Bootloader start count = 27852
351<6>[ 0.567077] KPI: Bootloader end count = 156314
352<6>[ 0.567086] KPI: Bootloader display count = 87019
353<6>[ 0.567094] KPI: Bootloader load kernel count = 4153
354<6>[ 0.567104] KPI: Kernel MPM timestamp = 184105
355<6>[ 0.567113] KPI: Kernel MPM Clock frequency = 32768
356<6>[ 0.567141] socinfo_print: v0.10, id=293, ver=1.1, raw_id=70, raw_ver=1, hw_plat=11, hw_plat_ver=65536
357<6>[ 0.567141] accessory_chip=0, hw_plat_subtype=0, pmic_model=65558, pmic_die_revision=65536 foundry_id=3 serial_number=600274444
358<6>[ 0.568386] eldo2_8953: no parameters
359<3>[ 0.568843] qpnp_pin_of_gpio_xlate: no such PMIC gpio 5 in device topology
360<6>[ 0.568986] adv_vreg: no parameters
361<6>[ 0.569472] vdd_vreg: no parameters
362<6>[ 0.570102] vgaarb: loaded
363<5>[ 0.571391] SCSI subsystem initialized
364<6>[ 0.572440] usbcore: registered new interface driver usbfs
365<6>[ 0.572502] usbcore: registered new interface driver hub
366<6>[ 0.572735] usbcore: registered new device driver usb
367<6>[ 0.573621] media: Linux media interface: v0.10
368<6>[ 0.573694] Linux video capture interface: v2.00
369<6>[ 0.573822] EDAC MC: Ver: 3.0.0
370<6>[ 0.610269] cpufreq: driver msm up and running
371<6>[ 0.610784] platform soc:qcom,ion:qcom,ion-heap@8: assigned reserved memory node secure_region@0
372<6>[ 0.610999] platform soc:qcom,ion:qcom,ion-heap@27: assigned reserved memory node qseecom_region@0
373<6>[ 0.611248] ION heap system created
374<6>[ 0.611384] ION heap mm created at 0x00000000f6800000 with size 9800000
375<6>[ 0.611398] ION heap qsecom created at 0x00000000f5800000 with size 1000000
376<3>[ 0.611969] msm_bus_fabric_init_driver
377<4>[ 0.612958] msm_bus_device 580000.ad-hoc-bus: Coresight support absent for bus: 2048
378<6>[ 0.622877] qcom,qpnp-power-on qpnp-power-on-1: PMIC@SID0 Power-on reason: Triggered from Hard Reset and 'cold' boot
379<6>[ 0.622900] qcom,qpnp-power-on qpnp-power-on-1: PMIC@SID0: Power-off reason: Triggered from KPDPWR_N (Long Power Key hold)
380<6>[ 0.623060] input: qpnp_pon as /devices/virtual/input/input0
381<6>[ 0.623892] pon_spare_reg: no parameters
382<6>[ 0.623972] qcom,qpnp-power-on qpnp-power-on-14: No PON config. specified
383<6>[ 0.624021] qcom,qpnp-power-on qpnp-power-on-14: PMIC@SID2 Power-on reason: Triggered from PON1 (secondary PMIC) and 'cold' boot
384<6>[ 0.624038] qcom,qpnp-power-on qpnp-power-on-14: PMIC@SID2: Power-off reason: Triggered from PS_HOLD (PS_HOLD/MSM controlled shutdown)
385<6>[ 0.624196] PMIC@SID0: (null) v1.0 options: 2, 2, 0, 0
386<6>[ 0.624292] PMIC@SID2: PMI8950 v2.0 options: 0, 0, 0, 0
387<3>[ 0.624889] ipa ipa2_uc_state_check:296 uC interface not initialized
388<3>[ 0.624897] ipa ipa_sps_irq_control_all:938 EP (2) not allocated.
389<3>[ 0.624902] ipa ipa_sps_irq_control_all:938 EP (5) not allocated.
390<6>[ 0.626344] sps:BAM 0x0000000007904000 is registered.
391<6>[ 0.626820] sps:BAM 0x0000000007904000 (va:0xffffff8001840000) enabled: ver:0x27, number of pipes:20
392<6>[ 0.629742] IPA driver initialization was successful.
393<6>[ 0.630696] gdsc_venus: no parameters
394<6>[ 0.630977] gdsc_mdss: no parameters
395<6>[ 0.631224] gdsc_jpeg: no parameters
396<6>[ 0.631636] gdsc_vfe: no parameters
397<6>[ 0.632068] gdsc_vfe1: no parameters
398<6>[ 0.632317] gdsc_cpp: no parameters
399<6>[ 0.632528] gdsc_oxili_gx: no parameters
400<6>[ 0.632608] gdsc_oxili_gx: supplied by msm_gfx_ldo
401<6>[ 0.632839] gdsc_venus_core0: fast normal
402<6>[ 0.633042] gdsc_oxili_cx: no parameters
403<6>[ 0.633228] gdsc_usb30: no parameters
404<6>[ 0.634150] mdss_pll_probe: MDSS pll label = MDSS DSI 0 PLL
405<6>[ 0.634836] dsi_pll_clock_register_8996: Registered DSI PLL ndx=0 clocks successfully
406<6>[ 0.634863] mdss_pll_probe: MDSS pll label = MDSS DSI 1 PLL
407<3>[ 0.635980] pll_is_pll_locked_8996: DSI PLL ndx=1 status=0 failed to Lock
408<6>[ 0.636461] dsi_pll_clock_register_8996: Registered DSI PLL ndx=1 clocks successfully
409<6>[ 0.636884] msm_iommu 1e00000.qcom,iommu: device apps_iommu (model: 500) mapped at ffffff8001e00000, with 21 ctx banks
410<6>[ 0.642604] msm_iommu_ctx 1e20000.qcom,iommu-ctx: context adsp_elf using bank 0
411<6>[ 0.642750] msm_iommu_ctx 1e21000.qcom,iommu-ctx: context adsp_sec_pixel using bank 1
412<6>[ 0.642891] msm_iommu_ctx 1e22000.qcom,iommu-ctx: context mdp_1 using bank 2
413<6>[ 0.643034] msm_iommu_ctx 1e23000.qcom,iommu-ctx: context venus_fw using bank 3
414<6>[ 0.643173] msm_iommu_ctx 1e24000.qcom,iommu-ctx: context venus_sec_non_pixel using bank 4
415<6>[ 0.643316] msm_iommu_ctx 1e25000.qcom,iommu-ctx: context venus_sec_bitstream using bank 5
416<6>[ 0.643459] msm_iommu_ctx 1e26000.qcom,iommu-ctx: context venus_sec_pixel using bank 6
417<6>[ 0.643627] msm_iommu_ctx 1e28000.qcom,iommu-ctx: context pronto_pil using bank 8
418<6>[ 0.643794] msm_iommu_ctx 1e29000.qcom,iommu-ctx: context q6 using bank 9
419<6>[ 0.643958] msm_iommu_ctx 1e2a000.qcom,iommu-ctx: context periph_rpm using bank 10
420<6>[ 0.644129] msm_iommu_ctx 1e2b000.qcom,iommu-ctx: context lpass using bank 11
421<6>[ 0.644293] msm_iommu_ctx 1e2f000.qcom,iommu-ctx: context adsp_io using bank 15
422<6>[ 0.644460] msm_iommu_ctx 1e30000.qcom,iommu-ctx: context adsp_opendsp using bank 16
423<6>[ 0.644625] msm_iommu_ctx 1e31000.qcom,iommu-ctx: context adsp_shared using bank 17
424<6>[ 0.644788] msm_iommu_ctx 1e32000.qcom,iommu-ctx: context cpp using bank 18
425<6>[ 0.644954] msm_iommu_ctx 1e33000.qcom,iommu-ctx: context jpeg_enc0 using bank 19
426<6>[ 0.645124] msm_iommu_ctx 1e34000.qcom,iommu-ctx: context vfe using bank 20
427<6>[ 0.645287] msm_iommu_ctx 1e35000.qcom,iommu-ctx: context mdp_0 using bank 21
428<6>[ 0.645451] msm_iommu_ctx 1e36000.qcom,iommu-ctx: context venus_ns using bank 22
429<6>[ 0.645614] msm_iommu_ctx 1e38000.qcom,iommu-ctx: context ipa using bank 24
430<6>[ 0.645779] msm_iommu_ctx 1e37000.qcom,iommu-ctx: context access_control using bank 23
431<3>[ 0.647770] /soc/qcom,cam_smmu/msm_cam_smmu_cb1: could not get #iommu-cells for /soc/qcom,iommu@1e00000
432<3>[ 0.647796] /soc/qcom,cam_smmu/msm_cam_smmu_cb3: could not get #iommu-cells for /soc/qcom,iommu@1e00000
433<3>[ 0.647816] /soc/qcom,cam_smmu/msm_cam_smmu_cb4: could not get #iommu-cells for /soc/qcom,iommu@1e00000
434<6>[ 0.649801] Advanced Linux Sound Architecture Driver Initialized.
435<6>[ 0.650610] Bluetooth: ffffffc04ee9fcf8
436<6>[ 0.650635] NET: Registered protocol family 31
437<6>[ 0.650641] Bluetooth: ffffffc04ee9fcf8
438<6>[ 0.650651] Bluetooth: ffffffc04ee9fcd8Bluetooth: ffffffc04ee9fca8
439<6>[ 0.650682] Bluetooth: ffffffc04ee9fcb8<6>[ 0.650975] cfg80211: Calling CRDA to update world regulatory domain
440<6>[ 0.650993] cfg80211: World regulatory domain updated:
441<6>[ 0.650998] cfg80211: DFS Master region: unset
442<6>[ 0.651002] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
443<6>[ 0.651010] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
444<6>[ 0.651016] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
445<6>[ 0.651021] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A, 2000 mBm), (N/A)
446<6>[ 0.651027] cfg80211: (5170000 KHz - 5250000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A)
447<6>[ 0.651032] cfg80211: (5250000 KHz - 5330000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A)
448<6>[ 0.651038] cfg80211: (5490000 KHz - 5710000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A)
449<6>[ 0.651044] cfg80211: (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A)
450<6>[ 0.651049] cfg80211: (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm), (N/A)
451<1>[ 0.651146] pcie:pcie_init.
452<6>[ 0.652591] ibb_reg: 4600 <--> 6000 mV at 5500 mV
453<6>[ 0.652841] lab_reg: 4600 <--> 6000 mV at 5500 mV
454<6>[ 0.653475] Switched to clocksource arch_sys_counter
455<6>[ 0.692383] bcl_peripheral:bcl_perph_init BCL Initialized
456<6>[ 0.694123] NET: Registered protocol family 2
457<6>[ 0.694513] TCP established hash table entries: 32768 (order: 6, 262144 bytes)
458<6>[ 0.694672] TCP bind hash table entries: 32768 (order: 7, 524288 bytes)
459<6>[ 0.694984] TCP: Hash tables configured (established 32768 bind 32768)
460<6>[ 0.695025] TCP: reno registered
461<6>[ 0.695033] UDP hash table entries: 2048 (order: 4, 65536 bytes)
462<6>[ 0.695083] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
463<6>[ 0.695251] NET: Registered protocol family 1
464<7>[ 0.695282] PCI: CLS 0 bytes, default 64
465<6>[ 0.697473] gcc-mdss-8953 1800000.qcom,gcc-mdss: Registered GCC MDSS clocks.
466<6>[ 0.697932] Trying to unpack rootfs image as initramfs...
467<6>[ 1.091881] Freeing initrd memory: 25512K (ffffffc003600000 - ffffffc004eea000)
468<6>[ 1.095817] futex hash table entries: 2048 (order: 5, 131072 bytes)
469<5>[ 1.095894] Initialise system trusted keyring
470<6>[ 1.095934] audit: initializing netlink subsys (disabled)
471<5>[ 1.095978] audit: type=2000 audit(1.089:1): initialized
472<4>[ 1.096338] vmscan: error setting kswapd cpu affinity mask
473<6>[ 1.099864] zbud: loaded
474<5>[ 1.100362] VFS: Disk quotas dquot_6.5.2
475<4>[ 1.100456] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
476<6>[ 1.101750] Registering sdcardfs 0.1
477<6>[ 1.102231] fuse init (API version 7.23)
478<7>[ 1.102632] SELinux: Registering netfilter hooks
479<5>[ 1.104608] Key type asymmetric registered
480<5>[ 1.104617] Asymmetric key parser 'x509' registered
481<6>[ 1.104716] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 247)
482<6>[ 1.104725] io scheduler noop registered
483<6>[ 1.104733] io scheduler deadline registered
484<6>[ 1.104870] io scheduler cfq registered (default)
485<3>[ 1.108962] i2c-msm-v2 78b6000.i2c: msm_bus_scale_register_client(mstr-id:86):0x2 (ok)
486<3>[ 1.109083] i2c-msm-v2 78b6000.i2c: NACK: slave not responding, ensure its powered: msgs(n:2 cur:0 tx) bc(rx:1 tx:1) mode:FIFO slv_addr:0x39 MSTR_STS:0x0d1300c8 OPER:0x00000010
487<3>[ 1.109115] msm_dba_helper_i2c_read: i2c read failed
488<3>[ 1.109122] adv7533_read: read err: addr 0x39, reg 0x0, size 0x1
489<3>[ 1.109128] adv7533_probe: Failed to read chip rev
490<4>[ 1.109181] adv7533: probe of 2-0039 failed with error -5
491<3>[ 1.109507] msm_dss_get_res_byname: 'vbif_nrt_phys' resource not found
492<3>[ 1.109517] mdss_mdp_probe+0x228/0x10dc->msm_dss_ioremap_byname: 'vbif_nrt_phys' msm_dss_get_res_byname failed
493<3>[ 1.109927] mdss_mdp_irq_clk_register: unable to get clk: lut_clk
494<3>[ 1.110491] No change in context(0==0), skip
495<6>[ 1.111172] mdss_mdp_pipe_addr_setup: type:0 ftchid:-1 xinid:0 num:0 rect:0 ndx:0x1 prio:0
496<6>[ 1.111189] mdss_mdp_pipe_addr_setup: type:1 ftchid:-1 xinid:1 num:3 rect:0 ndx:0x8 prio:1
497<6>[ 1.111195] mdss_mdp_pipe_addr_setup: type:1 ftchid:-1 xinid:5 num:4 rect:0 ndx:0x10 prio:2
498<6>[ 1.111208] mdss_mdp_pipe_addr_setup: type:2 ftchid:-1 xinid:2 num:6 rect:0 ndx:0x40 prio:3
499<6>[ 1.111222] mdss_mdp_pipe_addr_setup: type:3 ftchid:-1 xinid:7 num:10 rect:0 ndx:0x400 prio:0
500<3>[ 1.111231] mdss_mdp_parse_dt_handler: Error from prop qcom,mdss-pipe-sw-reset-off : u32 array read
501<3>[ 1.111316] mdss_mdp_parse_dt_handler: Error from prop qcom,mdss-ib-factor-overlap : u32 array read
502<6>[ 1.111583] xlog_status: enable:1, panic:1, dump:2
503<6>[ 1.112210] mdss_mdp_probe: mdss version = 0x10100000, bootloader display is on, num 1, intf_sel=0x00000100
504<3>[ 1.113911] mdss_smmu_util_parse_dt_clock: clocks are not defined
505<6>[ 1.113958] mdss_smmu_probe: iommu v2 domain[0] mapping and clk register successful!
506<3>[ 1.113982] mdss_smmu_util_parse_dt_clock: clocks are not defined
507<6>[ 1.114014] mdss_smmu_probe: iommu v2 domain[2] mapping and clk register successful!
508<6>[ 1.115851] mdss_dsi_ctrl_probe: DSI Ctrl name = MDSS DSI CTRL->0
509<6>[ 1.116335] mdss_dsi_find_panel_of_node: cmdline:0:qcom,mdss_dsi_nt35596_tianma_fhd_video:1:none:cfg:single_dsi panel_name:qcom,mdss_dsi_nt35596_tianma_fhd_video
510<6>[ 1.116390] mdss_dsi_panel_init: Panel Name = nt35596 tianma fhd video mode dsi panel
511<6>[ 1.116525] mdss_dsi_panel_timing_from_dt: found new timing "qcom,mdss_dsi_nt35596_tianma_fhd_video" (ffffffc04ee9f268)
512<3>[ 1.116542] mdss_dsi_parse_dcs_cmds: failed, key=qcom,mdss-dsi-post-panel-on-command
513<3>[ 1.116550] mdss_dsi_parse_dcs_cmds: failed, key=qcom,mdss-dsi-timing-switch-command
514<4>[ 1.116555] mdss_dsi_panel_get_dsc_cfg_np: cannot find dsc config node:
515<6>[ 1.116658] mdss_dsi_parse_panel_features: ulps feature disabled
516<6>[ 1.116666] mdss_dsi_parse_panel_features: ulps during suspend feature disabled
517<6>[ 1.116673] mdss_dsi_parse_dms_config: dynamic switch feature enabled: 0
518<3>[ 1.116691] No valid panel-status-check-mode string
519<4>[ 1.116791] 1a94000.qcom,mdss_dsi_ctrl0 supply vdd not found, using dummy regulator
520<3>[ 1.117021] mdss_dsi_parse_ctrl_params:3895 Unable to read qcom,display-id, data=0000000000000000,len=20
521<6>[ 1.117033] mdss_dsi_parse_gpio_params: bklt_en gpio not specified
522<3>[ 1.117090] msm_dss_get_res_byname: 'dsi_phy_regulator' resource not found
523<3>[ 1.117100] mdss_dsi_retrieve_ctrl_resources+0x178/0x1fc->msm_dss_ioremap_byname: 'dsi_phy_regulator' msm_dss_get_res_byname failed
524<6>[ 1.117107] mdss_dsi_retrieve_ctrl_resources: ctrl_base=ffffff8001808000 ctrl_size=400 phy_base=ffffff800180a400 phy_size=580
525<3>[ 1.117114] dsi_panel_device_register: Using default BTA for ESD check
526<6>[ 1.117190] dsi_panel_device_register: Continuous splash enabled
527<6>[ 1.117445] mdss_register_panel: adding framebuffer device 1a94000.qcom,mdss_dsi_ctrl0
528<6>[ 1.118721] mdss_dsi_ctrl_probe: Dsi Ctrl->0 initialized, DSI rev:0x10040002, PHY rev:0x2
529<6>[ 1.118856] mdss_dsi_status_init: DSI status check interval:5000
530<6>[ 1.119717] mdss_register_panel: adding framebuffer device soc:qcom,mdss_wb_panel
531<6>[ 1.120257] mdss_fb_probe: fb0: split_mode:0 left:0 right:0
532<6>[ 1.120897] mdss_fb_register: FrameBuffer[0] 1080x1920 registered successfully!
533<6>[ 1.121216] mdss_fb_probe: fb1: split_mode:0 left:0 right:0
534<6>[ 1.121301] mdss_fb_register: FrameBuffer[1] 640x640 registered successfully!
535<3>[ 1.121372] mdss_mdp_splash_parse_dt: splash mem child node is not present
536<3>[ 1.121625] mdss_mdp_kcal_store_fb0_ctl panel name nt35596 tianma fhd video mode dsi panel
537<3>[ 1.121630] mdss_mdp_kcal_store_fb0_ctl panel found...
538<6>[ 1.121669] kcal_ctrl_init: registered
539<6>[ 1.122614] spcom [spcom_init]: spcom driver Ver 1.0 23-Nov-2015.
540<3>[ 1.124440] IPC_RTR: msm_ipc_router_smd_driver_register Already driver registered IPCRTR
541<3>[ 1.124466] IPC_RTR: msm_ipc_router_smd_driver_register Already driver registered IPCRTR
542<6>[ 1.128060] In memshare_probe, Memshare probe success
543<5>[ 1.129887] msm_rpm_log_probe: OK
544<6>[ 1.131014] subsys-pil-tz soc:qcom,kgsl-hyp: for a506_zap segments only will be dumped.
545<6>[ 1.132768] subsys-pil-tz 1de0000.qcom,venus: for venus segments only will be dumped.
546<6>[ 1.135705] msm_serial_hs module loaded
547<6>[ 1.144882] platform 1c40000.qcom,kgsl-iommu:gfx3d_secure: assigned reserved memory node secure_region@0
548<6>[ 1.150607] brd: module loaded
549<6>[ 1.152289] loop: module loaded
550<6>[ 1.152547] zram: Created 1 device(s) ...
551<6>[ 1.152951] QSEECOM: qseecom_probe: qseecom.qsee_version = 0x1000000
552<4>[ 1.152977] QSEECOM: qseecom_retrieve_ce_data: Device does not support PFE
553<6>[ 1.152984] QSEECOM: qseecom_probe: qseecom clocks handled by other subsystem
554<4>[ 1.152992] QSEECOM: qseecom_probe: qsee reentrancy support phase is not defined, setting to default 0
555<4>[ 1.153508] QSEECOM: qseecom_probe: qseecom.whitelist_support = 0
556<4>[ 1.154830] i2c-core: driver [tabla-i2c-core] using legacy suspend method
557<4>[ 1.154836] i2c-core: driver [tabla-i2c-core] using legacy resume method
558<4>[ 1.154909] i2c-core: driver [wcd9xxx-i2c-core] using legacy suspend method
559<4>[ 1.154914] i2c-core: driver [wcd9xxx-i2c-core] using legacy resume method
560<4>[ 1.154993] i2c-core: driver [tasha-i2c-core] using legacy suspend method
561<4>[ 1.154998] i2c-core: driver [tasha-i2c-core] using legacy resume method
562<4>[ 1.155504] nq-nci 5-0028: ese GPIO <OPTIONAL> error getting from OF node
563<3>[ 1.155579] nq-nci 5-0028: nqx_probe: ese gpio not provided
564<3>[ 1.210227] i2c-msm-v2 7af5000.i2c: msm_bus_scale_register_client(mstr-id:84):0xd (ok)
565<3>[ 1.210356] i2c-msm-v2 7af5000.i2c: NACK: slave not responding, ensure its powered: msgs(n:1 cur:0 tx) bc(rx:0 tx:4) mode:FIFO slv_addr:0x28 MSTR_STS:0x0d1300c8 OPER:0x00000090
566<3>[ 1.210393] nq-nci 5-0028: nfcc_hw_check: - i2c_master_send Error
567<3>[ 1.210399] nq-nci 5-0028: nfcc_hw_check: - NFCC HW not available
568<4>[ 1.210470] ------------[ cut here ]------------
569<4>[ 1.210480] WARNING: CPU: 5 PID: 1 at ../../../../../../kernel/xiaomi/mido/drivers/gpio/gpiolib.c:68 gpio_to_desc+0x3c/0x64()
570<4>[ 1.210484] invalid GPIO -22
571<4>[ 1.210492] CPU: 5 PID: 1 Comm: swapper/0 Tainted: G W 3.18.31-perf-g79d883996 #1
572<4>[ 1.210497] Hardware name: Qualcomm Technologies, Inc. MSM8953 QRD SKU3 (DT)
573<0>[ 1.210503] Call trace:
574<4>[ 1.210511] [<ffffffc00008a028>] dump_backtrace+0x0/0x24c
575<4>[ 1.210517] [<ffffffc00008a294>] show_stack+0x20/0x28
576<4>[ 1.210525] [<ffffffc000fd0aac>] dump_stack+0x80/0xa4
577<4>[ 1.210533] [<ffffffc0000a5194>] warn_slowpath_common+0x90/0xb8
578<4>[ 1.210539] [<ffffffc0000a5278>] warn_slowpath_fmt+0x88/0xac
579<4>[ 1.210545] [<ffffffc0003f8df0>] gpio_to_desc+0x3c/0x64
580<4>[ 1.210551] [<ffffffc0003faae8>] gpio_free+0x20/0x30
581<4>[ 1.210560] [<ffffffc00064fc30>] nqx_probe+0x7c8/0x874
582<4>[ 1.210568] [<ffffffc0007f3ce8>] i2c_device_probe+0xc4/0xf8
583<4>[ 1.210575] [<ffffffc0005f89fc>] driver_probe_device+0xdc/0x22c
584<4>[ 1.210581] [<ffffffc0005f8c14>] __driver_attach+0x74/0xa0
585<4>[ 1.210587] [<ffffffc0005f6ed4>] bus_for_each_dev+0x9c/0xcc
586<4>[ 1.210593] [<ffffffc0005f8d10>] driver_attach+0x2c/0x34
587<4>[ 1.210599] [<ffffffc0005f785c>] bus_add_driver+0xf8/0x1c8
588<4>[ 1.210605] [<ffffffc0005f9844>] driver_register+0x9c/0xe8
589<4>[ 1.210611] [<ffffffc0007f4d10>] i2c_register_driver+0x58/0xb8
590<4>[ 1.210617] [<ffffffc0016f3b2c>] nqx_dev_init+0x18/0x20
591<4>[ 1.210625] [<ffffffc0016b8b54>] do_one_initcall+0x188/0x1a4
592<4>[ 1.210631] [<ffffffc0016b8d40>] kernel_init_freeable+0x1d0/0x284
593<4>[ 1.210637] [<ffffffc000fca370>] kernel_init+0x20/0xe0
594<4>[ 1.210642] ---[ end trace 97fdc3d68b4b7041 ]---
595<3>[ 1.210654] nq-nci 5-0028: nqx_probe: probing nqxx failed, check hardware
596<6>[ 1.210945] QCE50: __qce_get_device_tree_data: BAM Apps EE is not defined, setting to default 1
597<6>[ 1.211472] qce 720000.qcedev: Qualcomm Crypto 5.3.3 device found @0x720000
598<6>[ 1.211481] qce 720000.qcedev: CE device = 0x0
599<6>[ 1.211481] , IO base, CE = 0xffffff8001f40000
600<6>[ 1.211481] , Consumer (IN) PIPE 2, Producer (OUT) PIPE 3
601<6>[ 1.211481] IO base BAM = 0x (null)
602<6>[ 1.211481] BAM IRQ 193
603<6>[ 1.211481] Engines Availability = 0x2010853
604<6>[ 1.211682] sps:BAM 0x0000000000704000 is registered.
605<6>[ 1.211842] sps:BAM 0x0000000000704000 (va:0xffffff8002100000) enabled: ver:0x27, number of pipes:8
606<6>[ 1.212053] QCE50: qce_sps_init: Qualcomm MSM CE-BAM at 0x0000000000704000 irq 193
607<6>[ 1.214759] QCE50: __qce_get_device_tree_data: BAM Apps EE is not defined, setting to default 1
608<6>[ 1.215535] qcrypto 720000.qcrypto: Qualcomm Crypto 5.3.3 device found @0x720000
609<6>[ 1.215544] qcrypto 720000.qcrypto: CE device = 0x0
610<6>[ 1.215544] , IO base, CE = 0xffffff8002140000
611<6>[ 1.215544] , Consumer (IN) PIPE 4, Producer (OUT) PIPE 5
612<6>[ 1.215544] IO base BAM = 0x (null)
613<6>[ 1.215544] BAM IRQ 193
614<6>[ 1.215544] Engines Availability = 0x2010853
615<6>[ 1.215809] QCE50: qce_sps_init: Qualcomm MSM CE-BAM at 0x0000000000704000 irq 193
616<6>[ 1.218032] qcrypto 720000.qcrypto: qcrypto-ecb-aes
617<6>[ 1.218111] qcrypto 720000.qcrypto: qcrypto-cbc-aes
618<6>[ 1.218189] qcrypto 720000.qcrypto: qcrypto-ctr-aes
619<6>[ 1.218266] qcrypto 720000.qcrypto: qcrypto-ecb-des
620<6>[ 1.218348] qcrypto 720000.qcrypto: qcrypto-cbc-des
621<6>[ 1.218425] qcrypto 720000.qcrypto: qcrypto-ecb-3des
622<6>[ 1.218503] qcrypto 720000.qcrypto: qcrypto-cbc-3des
623<6>[ 1.218580] qcrypto 720000.qcrypto: qcrypto-xts-aes
624<6>[ 1.218661] qcrypto 720000.qcrypto: qcrypto-sha1
625<6>[ 1.218739] qcrypto 720000.qcrypto: qcrypto-sha256
626<6>[ 1.218817] qcrypto 720000.qcrypto: qcrypto-aead-hmac-sha1-cbc-aes
627<6>[ 1.218895] qcrypto 720000.qcrypto: qcrypto-aead-hmac-sha1-cbc-des
628<6>[ 1.218973] qcrypto 720000.qcrypto: qcrypto-aead-hmac-sha1-cbc-3des
629<6>[ 1.219055] qcrypto 720000.qcrypto: qcrypto-aead-hmac-sha256-cbc-aes
630<6>[ 1.219134] qcrypto 720000.qcrypto: qcrypto-aead-hmac-sha256-cbc-des
631<6>[ 1.219212] qcrypto 720000.qcrypto: qcrypto-aead-hmac-sha256-cbc-3des
632<6>[ 1.219291] qcrypto 720000.qcrypto: qcrypto-hmac-sha1
633<6>[ 1.219369] qcrypto 720000.qcrypto: qcrypto-hmac-sha256
634<6>[ 1.219449] qcrypto 720000.qcrypto: qcrypto-aes-ccm
635<6>[ 1.219531] qcrypto 720000.qcrypto: qcrypto-rfc4309-aes-ccm
636<3>[ 1.220497] qcom_ice_get_device_tree_data: No vdd-hba-supply regulator, assuming not needed
637<6>[ 1.220622] ICE IRQ = 194
638<6>[ 1.221497] SCSI Media Changer driver v0.25
639<6>[ 1.222834] tun: Universal TUN/TAP device driver, 1.6
640<6>[ 1.222839] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
641<6>[ 1.222906] PPP generic driver version 2.4.2
642<6>[ 1.222984] PPP BSD Compression module registered
643<6>[ 1.222993] PPP Deflate Compression module registered
644<6>[ 1.223007] PPP MPPE Compression module registered
645<6>[ 1.223020] NET: Registered protocol family 24
646<3>[ 1.223054] Context not found
647<6>[ 1.223594] wcnss_wlan probed in built-in mode
648<6>[ 1.224216] usbcore: registered new interface driver asix
649<6>[ 1.224246] usbcore: registered new interface driver ax88179_178a
650<6>[ 1.224276] usbcore: registered new interface driver cdc_ether
651<6>[ 1.224306] usbcore: registered new interface driver net1080
652<6>[ 1.224335] usbcore: registered new interface driver cdc_subset
653<6>[ 1.224364] usbcore: registered new interface driver zaurus
654<6>[ 1.224493] usbcore: registered new interface driver cdc_ncm
655<6>[ 1.224878] msm_sharedmem: sharedmem_register_qmi: qmi init successful
656<3>[ 1.225383] scm_call failed: func id 0x42000c16, ret: -1, syscall returns: 0x0, 0x0, 0x0
657<6>[ 1.225390] hyp_assign_table: Failed to assign memory protection, ret = -5
658<3>[ 1.225398] msm_sharedmem: setup_shared_ram_perms: hyp_assign_phys failed IPA=0x0160x00000000f4900000 size=1572864 err=-5
659<6>[ 1.225486] msm_sharedmem: msm_sharedmem_probe: Device created for client 'rmtfs'
660<3>[ 1.230736] msm-dwc3 7000000.ssusb: unable to get dbm device
661<6>[ 1.232066] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
662<6>[ 1.232347] ehci-pci: EHCI PCI platform driver
663<6>[ 1.232377] ehci-msm: Qualcomm On-Chip EHCI Host Controller
664<6>[ 1.232688] usbcore: registered new interface driver cdc_acm
665<6>[ 1.232693] cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters
666<6>[ 1.232722] usbcore: registered new interface driver usb-storage
667<6>[ 1.232746] usbcore: registered new interface driver ums-alauda
668<6>[ 1.232770] usbcore: registered new interface driver ums-cypress
669<6>[ 1.232794] usbcore: registered new interface driver ums-datafab
670<6>[ 1.232818] usbcore: registered new interface driver ums-freecom
671<6>[ 1.232842] usbcore: registered new interface driver ums-isd200
672<6>[ 1.232866] usbcore: registered new interface driver ums-jumpshot
673<6>[ 1.232893] usbcore: registered new interface driver ums-karma
674<6>[ 1.232917] usbcore: registered new interface driver ums-sddr09
675<6>[ 1.232941] usbcore: registered new interface driver ums-sddr55
676<6>[ 1.232967] usbcore: registered new interface driver ums-usbat
677<6>[ 1.233043] usbcore: registered new interface driver usbserial
678<6>[ 1.233075] usbcore: registered new interface driver usb_ehset_test
679<6>[ 1.233592] gbridge_init: gbridge_init successs.
680<6>[ 1.233843] mousedev: PS/2 mouse device common for all mice
681<6>[ 1.233981] usbcore: registered new interface driver xpad
682<4>[ 1.233989] tony_test:[ft5435_ts_init]
683<4>[ 1.234397] ~~~~~ ft5435_ts_probe start
684<4>[ 1.234403] [ft5435_ts_probe]CONFIG_FB is defined
685<4>[ 1.234407] [ft5435_ts_probe]CONFIG_PM is defined
686<4>[ 1.234445] [ft5435_get_dt_vkey]000
687<4>[ 1.234449] [ft5435_get_dt_vkey]111
688<4>[ 1.234453] [ft5435_get_dt_vkey]222
689<4>[ 1.234456] [ft5435_get_dt_vkey]333
690<4>[ 1.234462] [FTS]keycode = 172, x= 500, y=2040
691<4>[ 1.234468] [FTS]keycode = 139, x= 200, y=2040
692<4>[ 1.234474] [FTS]keycode = 158, x= 800, y=2040
693<4>[ 1.234478] [ft5435_get_dt_vkey]5555
694<6>[ 1.234607] input: ft5435_ts as /devices/soc/78b7000.i2c/i2c-3/3-0038/input/input1
695<3>[ 1.480262] i2c-msm-v2 78b7000.i2c: msm_bus_scale_register_client(mstr-id:86):0x10 (ok)
696<6>[ 1.480460] ft5435_ts 3-0038: Device ID = 0x54
697<6>[ 1.480779] ft5435_ts 3-0038: report rate = 110Hz
698<6>[ 1.481356] ft5435_ts 3-0038: Firmware version = 10.0.0
699<4>[ 1.481504] [Fu]fw_vendor_id=0x3b
700<4>[ 1.481509] upgrade,fts_fw_vendor_id=0x3b
701<4>[ 1.481514] ft5435_fw_upgrade_by_array_data, suspended=0
702<6>[ 1.481521] ft5435_ts 3-0038: Current firmware: 0x0a.0.0
703<6>[ 1.481527] ft5435_ts 3-0038: New firmware: 0x0a.0.0
704<6>[ 1.481532] ft5435_ts 3-0038: Exiting fw upgrade...
705<4>[ 1.481537] ft5435_fw_upgrade_by_array_data done
706<4>[ 1.481606] ~~~~~ tp_glove_register enable!!!!!
707<4>[ 1.481611] [fts]ft5435_fw_LockDownInfo_get_from_boot, fw_vendor_id=0x3b
708<4>[ 1.900274] ft5435_fw_LockDownInfo_get_from_boot, FTS_UPGRADE_LOOP ok is i = 0
709<4>[ 1.940292] ft5435_fw_LockDownInfo_get_from_boot: REG VAL = 0x31, j=0
710<4>[ 1.940297] ft5435_fw_LockDownInfo_get_from_boot: REG VAL = 0x36, j=1
711<4>[ 1.940302] ft5435_fw_LockDownInfo_get_from_boot: REG VAL = 0x32, j=2
712<4>[ 1.940307] ft5435_fw_LockDownInfo_get_from_boot: REG VAL = 0x01, j=3
713<4>[ 1.940311] ft5435_fw_LockDownInfo_get_from_boot: REG VAL = 0xc6, j=4
714<4>[ 1.940316] ft5435_fw_LockDownInfo_get_from_boot: REG VAL = 0x01, j=5
715<4>[ 1.940320] ft5435_fw_LockDownInfo_get_from_boot: REG VAL = 0x31, j=6
716<4>[ 1.940325] ft5435_fw_LockDownInfo_get_from_boot: REG VAL = 0x01, j=7
717<4>[ 1.940331] ft5435_fw_LockDownInfo_get_from_boot: reset the tp
718<4>[ 2.250041] tpd_probe, ft5x46_ctpm_LockDownInfo_get_from_boot, tp_lockdown_info=31363201c6013101
719<6>[ 2.250063] ft5435_ts 3-0038: Create proc entry success!
720<4>[ 2.250207] ~~~~~ ft5435_ts_probe end
721<4>[ 2.250245] [ TSP ] ist30xx_init()
722<4>[ 2.250510] [ TSP ] ### IMAGIS probe(ver:3.0.0.0, addr:0x50) ###
723<4>[ 2.250525] [ TSP ] ##### Device tree #####
724<4>[ 2.250530] [ TSP ] reset gpio: 64
725<4>[ 2.250535] [ TSP ] irq gpio: 65
726<4>[ 2.250539] [ TSP ] ist30xx_request_gpio
727<4>[ 2.250545] [ TSP ] unable to request reset gpio: 64
728<4>[ 2.250550] [ TSP ] Error, ist30xx init driver
729<4>[ 2.250581] --------gf_init start.--------
730<3>[ 2.251041] msm8953-pinctrl 1000000.pinctrl: invalid group "gpio135" for function "blsp_spi6"
731<3>[ 2.251051] msm8953-pinctrl 1000000.pinctrl: invalid group "gpio136" for function "blsp_spi6"
732<3>[ 2.251060] msm8953-pinctrl 1000000.pinctrl: invalid group "gpio137" for function "blsp_spi6"
733<3>[ 2.251068] msm8953-pinctrl 1000000.pinctrl: invalid group "gpio138" for function "blsp_spi6"
734<4>[ 2.251161] --------gf_probe start.--------
735<6>[ 2.251322] input: gf3208 as /devices/virtual/input/input2
736<4>[ 2.251380] --------gf_probe end---OK.--------
737<6>[ 2.251509] status = 0x0
738<4>[ 2.251514] --------gf_init end---OK.--------
739<6>[ 2.252086] fpc1020 soc:fpc1020: fpc1020_probe: ok
740<6>[ 2.252183] fpc1020_init OK
741<6>[ 2.252877] input: hbtp_vm as /devices/virtual/input/input3
742<6>[ 2.253601] qcom,qpnp-rtc qpnp-rtc-8: rtc core: registered qpnp_rtc as rtc0
743<6>[ 2.253759] i2c /dev entries driver
744<6>[ 2.254382] lirc_dev: IR Remote Control driver registered, major 233
745<6>[ 2.254391] IR NEC protocol handler initialized
746<6>[ 2.254400] IR RC5(x/sz) protocol handler initialized
747<6>[ 2.254409] IR RC6 protocol handler initialized
748<6>[ 2.254417] IR JVC protocol handler initialized
749<6>[ 2.254426] IR Sony protocol handler initialized
750<6>[ 2.254434] IR SANYO protocol handler initialized
751<6>[ 2.254442] IR Sharp protocol handler initialized
752<6>[ 2.254451] IR LIRC bridge handler initialized
753<6>[ 2.254459] IR XMP protocol handler initialized
754<3>[ 2.259116] /soc/qcom,cam_smmu/msm_cam_smmu_cb1: could not get #iommu-cells for /soc/qcom,iommu@1e00000
755<3>[ 2.259446] /soc/qcom,cam_smmu/msm_cam_smmu_cb3: could not get #iommu-cells for /soc/qcom,iommu@1e00000
756<3>[ 2.259714] /soc/qcom,cam_smmu/msm_cam_smmu_cb4: could not get #iommu-cells for /soc/qcom,iommu@1e00000
757<3>[ 2.262047] msm_camera_get_dt_vreg_data:1115 number of entries is 0 or not present in dts
758<3>[ 2.265201] msm_camera_get_dt_vreg_data:1115 number of entries is 0 or not present in dts
759<3>[ 2.265927] msm_camera_get_dt_vreg_data:1115 number of entries is 0 or not present in dts
760<3>[ 2.266569] msm_camera_get_dt_vreg_data:1115 number of entries is 0 or not present in dts
761<3>[ 2.268559] msm_camera_get_dt_vreg_data:1115 number of entries is 0 or not present in dts
762<3>[ 2.269739] msm_camera_get_dt_vreg_data:1115 number of entries is 0 or not present in dts
763<3>[ 2.270940] msm_camera_get_dt_vreg_data:1115 number of entries is 0 or not present in dts
764<3>[ 2.271512] msm_camera_pinctrl_init:1277 Getting pinctrl handle failed
765<3>[ 2.271517] msm_actuator_platform_probe:1947 ERR:msm_actuator_platform_probe: Error in reading actuator pinctrl
766<4>[ 2.271585] qcom,actuator: probe of 1b0c000.qcom,cci:qcom,actuator@0 failed with error -22
767<3>[ 2.272291] msm_eeprom_platform_probe qcom,i2c-freq-mode read fail. Setting to 0 -22
768<3>[ 2.277765] msm_camera_config_single_vreg : can't find sub reg name
769<6>[ 2.286706] msm_cci_init:1385: hw_version = 0x10020005
770<3>[ 2.286733] read_eeprom_memory 158
771<3>[ 2.287171] msm_cci_irq:1720 MASTER_0 error 0x10000000
772<3>[ 2.287199] msm_cci_i2c_read:914 read_words = 0, exp words = 1
773<3>[ 2.287205] msm_cci_i2c_read_bytes:997 failed rc -22
774<3>[ 2.287209] read_eeprom_memory 173 error
775<3>[ 2.287214] msm_eeprom_platform_probe read_eeprom_memory failed
776<3>[ 2.295434] msm_camera_config_single_vreg : can't find sub reg name
777<4>[ 2.299643] qcom,eeprom: probe of 1b0c000.qcom,cci:qcom,eeprom@0 failed with error -22
778<3>[ 2.300089] msm_eeprom_platform_probe qcom,i2c-freq-mode read fail. Setting to 0 -22
779<3>[ 2.306467] msm_camera_config_single_vreg : can't find sub reg name
780<6>[ 2.315518] msm_cci_init:1385: hw_version = 0x10020005
781<3>[ 2.315541] read_eeprom_memory 158
782<3>[ 2.316131] qcom,slave-addr = 0xB0
783<3>[ 2.316624] qcom,slave-addr = 0xB0
784<3>[ 2.317117] qcom,slave-addr = 0xB0
785<3>[ 2.317790] qcom,slave-addr = 0xB0
786<3>[ 2.318642] qcom,slave-addr = 0xB0
787<3>[ 2.319135] qcom,slave-addr = 0xB0
788<3>[ 2.320080] qcom,slave-addr = 0xB0
789<3>[ 2.321023] qcom,slave-addr = 0xB0
790<3>[ 2.539071] qcom,slave-addr = 0xB0
791<3>[ 2.658577] msm_camera_config_single_vreg : can't find sub reg name
792<3>[ 2.663256] msm_eeprom_platform_probe qcom,i2c-freq-mode read fail. Setting to 0 -22
793<3>[ 2.669605] msm_camera_config_single_vreg : can't find sub reg name
794<6>[ 2.678641] msm_cci_init:1385: hw_version = 0x10020005
795<3>[ 2.678665] read_eeprom_memory 158
796<3>[ 2.679252] qcom,slave-addr = 0xB0
797<3>[ 2.679836] qcom,slave-addr = 0xB0
798<3>[ 2.680510] qcom,slave-addr = 0xB0
799<3>[ 2.681363] qcom,slave-addr = 0xB0
800<3>[ 2.682396] qcom,slave-addr = 0xB0
801<3>[ 2.900441] qcom,slave-addr = 0xB0
802<3>[ 3.011163] qcom,slave-addr = 0xB0
803<3>[ 3.020051] msm_camera_config_single_vreg : can't find sub reg name
804<3>[ 3.024776] msm_eeprom_platform_probe qcom,i2c-freq-mode read fail. Setting to 0 -22
805<6>[ 3.045737] msm_cci_init:1385: hw_version = 0x10020005
806<3>[ 3.045760] read_eeprom_memory 158
807<3>[ 3.046197] msm_cci_irq:1726 MASTER_1 error 0x40000000
808<3>[ 3.046225] msm_cci_i2c_read:914 read_words = 0, exp words = 1
809<3>[ 3.046230] msm_cci_i2c_read_bytes:997 failed rc -22
810<3>[ 3.046235] read_eeprom_memory 173 error
811<3>[ 3.046240] msm_eeprom_platform_probe read_eeprom_memory failed
812<4>[ 3.065618] qcom,eeprom: probe of 1b0c000.qcom,cci:qcom,eeprom@3 failed with error -22
813<3>[ 3.066059] msm_eeprom_platform_probe qcom,i2c-freq-mode read fail. Setting to 0 -22
814<6>[ 3.087668] msm_cci_init:1385: hw_version = 0x10020005
815<3>[ 3.087690] read_eeprom_memory 158
816<3>[ 3.088127] msm_cci_irq:1726 MASTER_1 error 0x40000000
817<3>[ 3.088157] msm_cci_i2c_read:914 read_words = 0, exp words = 1
818<3>[ 3.088163] msm_cci_i2c_read_bytes:997 failed rc -22
819<3>[ 3.088168] read_eeprom_memory 173 error
820<3>[ 3.088172] msm_eeprom_platform_probe read_eeprom_memory failed
821<4>[ 3.107538] qcom,eeprom: probe of 1b0c000.qcom,cci:qcom,eeprom@4 failed with error -22
822<3>[ 3.107980] msm_eeprom_platform_probe qcom,i2c-freq-mode read fail. Setting to 0 -22
823<6>[ 3.129593] msm_cci_init:1385: hw_version = 0x10020005
824<3>[ 3.129616] read_eeprom_memory 158
825<3>[ 3.310855] msm_eeprom_platform_probe qcom,i2c-freq-mode read fail. Setting to 0 -22
826<3>[ 3.317225] msm_camera_config_single_vreg : can't find sub reg name
827<6>[ 3.326257] msm_cci_init:1385: hw_version = 0x10020005
828<3>[ 3.326281] read_eeprom_memory 158
829<3>[ 3.326869] qcom,slave-addr = 0xB0
830<3>[ 3.453223] qcom,slave-addr = 0xB0
831<3>[ 3.579562] qcom,slave-addr = 0xB0
832<3>[ 3.705901] qcom,slave-addr = 0xB0
833<3>[ 3.832243] qcom,slave-addr = 0xB0
834<3>[ 3.958579] qcom,slave-addr = 0xB0
835<3>[ 4.084910] qcom,slave-addr = 0xB0
836<3>[ 4.211252] qcom,slave-addr = 0xB0
837<3>[ 4.345808] msm_camera_config_single_vreg : can't find sub reg name
838<3>[ 4.350513] msm_eeprom_platform_probe qcom,i2c-freq-mode read fail. Setting to 0 -22
839<3>[ 4.356880] msm_camera_config_single_vreg : can't find sub reg name
840<6>[ 4.365916] msm_cci_init:1385: hw_version = 0x10020005
841<3>[ 4.365939] read_eeprom_memory 158
842<3>[ 4.366379] msm_cci_irq:1720 MASTER_0 error 0x10000000
843<3>[ 4.366407] msm_cci_i2c_read:914 read_words = 0, exp words = 1
844<3>[ 4.366412] msm_cci_i2c_read_bytes:997 failed rc -22
845<3>[ 4.366417] read_eeprom_memory 173 error
846<3>[ 4.366422] msm_eeprom_platform_probe read_eeprom_memory failed
847<3>[ 4.374623] msm_camera_config_single_vreg : can't find sub reg name
848<4>[ 4.378835] qcom,eeprom: probe of 1b0c000.qcom,cci:qcom,eeprom@7 failed with error -22
849<3>[ 4.379237] msm_eeprom_platform_probe qcom,i2c-freq-mode read fail. Setting to 0 -22
850<3>[ 4.385703] msm_camera_config_single_vreg : can't find sub reg name
851<6>[ 4.394708] msm_cci_init:1385: hw_version = 0x10020005
852<3>[ 4.394731] read_eeprom_memory 158
853<3>[ 4.395318] qcom,slave-addr = 0xB0
854<3>[ 4.521668] qcom,slave-addr = 0xB0
855<3>[ 4.648005] qcom,slave-addr = 0xB0
856<3>[ 4.774342] qcom,slave-addr = 0xB0
857<3>[ 4.900683] qcom,slave-addr = 0xB0
858<3>[ 5.027022] qcom,slave-addr = 0xB0
859<3>[ 5.153360] qcom,slave-addr = 0xB0
860<3>[ 5.279700] qcom,slave-addr = 0xB0
861<3>[ 5.414254] msm_camera_config_single_vreg : can't find sub reg name
862<3>[ 5.418946] msm_eeprom_platform_probe qcom,i2c-freq-mode read fail. Setting to 0 -22
863<3>[ 5.425294] msm_camera_config_single_vreg : can't find sub reg name
864<6>[ 5.434310] msm_cci_init:1385: hw_version = 0x10020005
865<3>[ 5.434334] read_eeprom_memory 158
866<3>[ 5.434771] msm_cci_irq:1720 MASTER_0 error 0x10000000
867<3>[ 5.434799] msm_cci_i2c_read:914 read_words = 0, exp words = 1
868<3>[ 5.434804] msm_cci_i2c_read_bytes:997 failed rc -22
869<3>[ 5.434809] read_eeprom_memory 173 error
870<3>[ 5.434814] msm_eeprom_platform_probe read_eeprom_memory failed
871<3>[ 5.443019] msm_camera_config_single_vreg : can't find sub reg name
872<4>[ 5.447231] qcom,eeprom: probe of 1b0c000.qcom,cci:qcom,eeprom@9 failed with error -22
873<6>[ 5.454495] MSM-CPP cpp_init_hardware:869 CPP HW Version: 0x40030003
874<3>[ 5.454505] MSM-CPP cpp_init_hardware:887 stream_cnt:0
875<3>[ 5.465874] __msm_jpeg_init:1537] Jpeg Device id 0
876<6>[ 5.470067] FG: fg_probe: FG Probe success - FG Revision DIG:3.1 ANA:1.2 PMIC subtype=17
877<4>[ 5.473578] thermal thermal_zone1: failed to read out thermal zone 1
878<4>[ 5.473768] thermal thermal_zone2: failed to read out thermal zone 2
879<4>[ 5.473948] thermal thermal_zone3: failed to read out thermal zone 3
880<3>[ 5.474409] qpnp_vadc_read: no vadc_chg_vote found
881<3>[ 5.474415] qpnp_vadc_get_temp: VADC read error with -22
882<4>[ 5.474421] thermal thermal_zone4: failed to read out thermal zone 4
883<6>[ 5.495640] device-mapper: uevent: version 1.0.3
884<6>[ 5.495795] device-mapper: ioctl: 4.28.0-ioctl (2014-09-17) initialised: dm-devel@redhat.com
885<6>[ 5.495880] device-mapper: req-crypt: dm-req-crypt successfully initalized.
886<6>[ 5.495880]
887<6>[ 5.496715] sdhci: Secure Digital Host Controller Interface driver
888<6>[ 5.496720] sdhci: Copyright(c) Pierre Ossman
889<6>[ 5.496728] sdhci-pltfm: SDHCI platform and OF driver helper
890<6>[ 5.497308] qcom_ice_get_pdevice: found ice device ffffffc004af5400
891<6>[ 5.497314] qcom_ice_get_pdevice: matching platform device ffffffc0af273c00
892<6>[ 5.501945] qcom_ice 7803000.sdcc1ice: QC ICE 2.1.44 device found @0xffffff8001d70000
893<6>[ 5.502333] sdhci_msm 7824900.sdhci: No vmmc regulator found
894<6>[ 5.502339] sdhci_msm 7824900.sdhci: No vqmmc regulator found
895<6>[ 5.502643] mmc0: SDHCI controller on 7824900.sdhci [7824900.sdhci] using 64-bit ADMA in CMDQ mode
896<4>[ 5.532337] sdhci_msm 7864900.sdhci: sdhci_msm_probe: ICE device is not enabled
897<6>[ 5.551578] sdhci_msm 7864900.sdhci: No vmmc regulator found
898<6>[ 5.551586] sdhci_msm 7864900.sdhci: No vqmmc regulator found
899<6>[ 5.551908] mmc1: SDHCI controller on 7864900.sdhci [7864900.sdhci] using 64-bit ADMA in legacy mode
900<4>[ 5.582334] qcom,leds-qpnp: probe of leds-qpnp-21 failed with error -10
901<6>[ 5.585145] tz_log 8600720.tz-log: Hyp log service is not supported
902<6>[ 5.586116] hidraw: raw HID events driver (C) Jiri Kosina
903<6>[ 5.586358] usbcore: registered new interface driver usbhid
904<6>[ 5.586362] usbhid: USB HID core driver
905<6>[ 5.586629] ashmem: initialized
906<6>[ 5.587070] qpnp_coincell_charger_show_state: enabled=Y, voltage=3200 mV, resistance=2100 ohm
907<6>[ 5.591657] mmc0: Out-of-interrupt timeout is 100[ms]
908<6>[ 5.591664] mmc0: BKOPS_EN equals 0x2
909<6>[ 5.591669] mmc0: eMMC FW version: 0x03
910<6>[ 5.591674] mmc0: CMDQ supported: depth: 32
911<6>[ 5.591678] mmc0: cache barrier support 1 flush policy 1
912<6>[ 5.594551] bimc-bwmon 408000.qcom,cpu-bwmon: BW HWmon governor registered.
913<3>[ 5.601202] devfreq soc:qcom,cpubw: Couldn't update frequency transition information.
914<3>[ 5.601348] devfreq soc:qcom,mincpubw: Couldn't update frequency transition information.
915<6>[ 5.602122] cmdq_host_alloc_tdl: desc_size: 768 data_sz: 253952 slot-sz: 24
916<6>[ 5.602361] desc-base: 0xffffff8001e54000 trans-base: 0xffffff8001f01000
917<6>[ 5.602361] desc_dma 0xf446a000 trans_dma: 0xf4880000
918<6>[ 5.602377] mmc0: CMDQ enabled on card
919<6>[ 5.602388] mmc0: new HS400 MMC card at address 0001
920<6>[ 5.602751] sdhci_msm_pm_qos_cpu_init (): voted for group #0 (mask=0xf) latency=2 (0xffffffc004166600)
921<6>[ 5.602760] sdhci_msm_pm_qos_cpu_init (): voted for group #1 (mask=0xf0) latency=2 (0xffffffc004166608)
922<6>[ 5.602865] mmcblk0: mmc0:0001 032G32 29.1 GiB
923<6>[ 5.602960] mmcblk0rpmb: mmc0:0001 032G32 partition 3 4.00 MiB
924<6>[ 5.603254] coresight-fuse a601c.fuse: Fuse initialized
925<4>[ 5.603618] coresight-cti: probe of 6010000.cti failed with error -1
926<4>[ 5.603644] coresight-cti: probe of 6011000.cti failed with error -1
927<4>[ 5.603671] coresight-cti: probe of 6012000.cti failed with error -1
928<4>[ 5.603696] coresight-cti: probe of 6013000.cti failed with error -1
929<4>[ 5.603720] coresight-cti: probe of 6014000.cti failed with error -1
930<4>[ 5.603744] coresight-cti: probe of 6015000.cti failed with error -1
931<4>[ 5.603769] coresight-cti: probe of 6016000.cti failed with error -1
932<4>[ 5.603794] coresight-cti: probe of 6017000.cti failed with error -1
933<4>[ 5.603819] coresight-cti: probe of 6018000.cti failed with error -1
934<4>[ 5.603843] coresight-cti: probe of 6019000.cti failed with error -1
935<4>[ 5.603867] coresight-cti: probe of 601a000.cti failed with error -1
936<4>[ 5.603892] coresight-cti: probe of 601b000.cti failed with error -1
937<4>[ 5.603916] coresight-cti: probe of 601c000.cti failed with error -1
938<4>[ 5.603944] coresight-cti: probe of 601d000.cti failed with error -1
939<4>[ 5.603968] coresight-cti: probe of 601e000.cti failed with error -1
940<4>[ 5.603992] coresight-cti: probe of 601f000.cti failed with error -1
941<4>[ 5.604017] coresight-cti: probe of 6198000.cti failed with error -1
942<4>[ 5.604042] coresight-cti: probe of 6199000.cti failed with error -1
943<4>[ 5.604066] coresight-cti: probe of 619a000.cti failed with error -1
944<4>[ 5.604091] coresight-cti: probe of 619b000.cti failed with error -1
945<4>[ 5.604115] coresight-cti: probe of 61b8000.cti failed with error -1
946<4>[ 5.604139] coresight-cti: probe of 61b9000.cti failed with error -1
947<4>[ 5.604164] coresight-cti: probe of 61ba000.cti failed with error -1
948<4>[ 5.604189] coresight-cti: probe of 61bb000.cti failed with error -1
949<4>[ 5.604214] coresight-cti: probe of 6128000.cti failed with error -1
950<4>[ 5.604238] coresight-cti: probe of 6124000.cti failed with error -1
951<4>[ 5.604262] coresight-cti: probe of 6134000.cti failed with error -1
952<4>[ 5.604287] coresight-cti: probe of 6139000.cti failed with error -1
953<4>[ 5.604317] coresight-cti: probe of 613c000.cti failed with error -1
954<4>[ 5.604342] coresight-cti: probe of 610c000.cti failed with error -1
955<6>[ 5.604707] coresight-csr 6001000.csr: CSR initialized
956<4>[ 5.605069] coresight-tmc: probe of 6028000.tmc failed with error -1
957<6>[ 5.605089] mmcblk0: p1 p2 p3 p4 p5 p6 p7 p8 p9 p10 p11 p12 p13 p14 p15 p16 p17 p18 p19 p20 p21 p22 p23 p24 p25 p26 p27 p28 p29 p30 p31 p32 p33 p34 p35 p36 p37 p38 p39 p40 p41 p42 p43 p44 p45 p46 p47 p48 p49
958<3>[ 5.605201] coresight-tmc 6027000.tmc: failed to get flush cti
959<3>[ 5.605207] coresight-tmc 6027000.tmc: failed to get reset cti
960<6>[ 5.605350] coresight-tmc 6027000.tmc: TMC initialized
961<6>[ 5.606862] nidnt boot config: 0
962<6>[ 5.607829] coresight-tpiu 6020000.tpiu: NIDnT on SDCARD only mode
963<6>[ 5.607915] coresight-tpiu 6020000.tpiu: TPIU initialized
964<6>[ 5.609569] coresight-replicator 6026000.replicator: REPLICATOR initialized
965<4>[ 5.609971] coresight-stm: probe of 6002000.stm failed with error -1
966<6>[ 5.610484] coresight-hwevent 6101000.hwevent: Hardware Event driver initialized
967<6>[ 5.611232] usbcore: registered new interface driver snd-usb-audio
968<6>[ 5.624993] msm-pcm-lpa soc:qcom,msm-pcm-lpa: msm_pcm_probe: dev name soc:qcom,msm-pcm-lpa
969<6>[ 5.630084] u32 classifier
970<6>[ 5.630091] Actions configured
971<6>[ 5.630127] Netfilter messages via NETLINK v0.30.
972<6>[ 5.630172] nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
973<6>[ 5.630529] ctnetlink v0.93: registering with nfnetlink.
974<6>[ 5.631022] xt_time: kernel timezone is -0000
975<6>[ 5.631228] ip_tables: (C) 2000-2006 Netfilter Core Team
976<6>[ 5.631367] arp_tables: (C) 2002 David S. Miller
977<6>[ 5.631411] TCP: cubic registered
978<6>[ 5.631420] Initializing XFRM netlink socket
979<6>[ 5.631751] NET: Registered protocol family 10
980<6>[ 5.632608] mip6: Mobile IPv6
981<6>[ 5.632632] ip6_tables: (C) 2000-2006 Netfilter Core Team
982<6>[ 5.632754] sit: IPv6 over IPv4 tunneling driver
983<6>[ 5.633105] NET: Registered protocol family 17
984<6>[ 5.633126] NET: Registered protocol family 15
985<6>[ 5.633160] bridge: automatic filtering via arp/ip/ip6tables has been deprecated. Update your scripts to load br_netfilter if you need this.
986<5>[ 5.633178] Bridge firewalling registered
987<6>[ 5.633186] Ebtables v2.0 registered
988<6>[ 5.633284] Bluetooth: ffffffc04ee9fcb8
989<6>[ 5.633295] Bluetooth: ffffffc04ee9fca8Bluetooth: ffffffc04ee9fce8
990<6>[ 5.633327] Bluetooth: ffffffc04ee9fcc8Bluetooth: ffffffc04ee9fcc8
991<6>[ 5.633341] Bluetooth: ffffffc04ee9fca8Bluetooth: ffffffc04ee9fd18
992<6>[ 5.633359] Bluetooth: ffffffc04ee9fcf8<6>[ 5.633399] l2tp_core: L2TP core driver, V2.0
993<6>[ 5.633414] l2tp_ppp: PPPoL2TP kernel driver, V2.0
994<6>[ 5.633422] l2tp_ip: L2TP IP encapsulation support (L2TPv3)
995<6>[ 5.633442] l2tp_netlink: L2TP netlink interface
996<6>[ 5.633468] l2tp_eth: L2TP ethernet pseudowire support (L2TPv3)
997<6>[ 5.633489] l2tp_debugfs: L2TP debugfs support
998<6>[ 5.633498] l2tp_ip6: L2TP IP encapsulation support for IPv6 (L2TPv3)
999<6>[ 5.634199] NET: Registered protocol family 27
1000<6>[ 5.639199] subsys-pil-tz a21b000.qcom,pronto: for wcnss segments only will be dumped.
1001<6>[ 5.641174] pil-q6v5-mss 4080000.qcom,mss: for modem segments only will be dumped.
1002<6>[ 5.644607] sps:BAM 0x0000000007104000 is registered.
1003<3>[ 5.647567] qpnp-smbcharger qpnp-smbcharger-18: node /soc/qcom,spmi@200f000/qcom,pmi8950@2/qcom,qpnp-smbcharger IO resource absent!
1004<6>[ 5.647728] smbcharger_charger_otg: no parameters
1005<3>[ 5.647840] SMBCHG: smbchg_hvdcp_enable_cb: smbchg_hvdcp_enable_cb enable 0 last_enable 0
1006<4>[ 5.648662] smbchg_hw_init:read OTG_CFG=78
1007<3>[ 7.150061] SMBCHG: wait_for_usbin_uv: usbin uv didnt go to a risen state, still at low, tries = 2, rc = 0
1008<3>[ 7.150068] SMBCHG: rerun_apsd: wait for usbin uv failed rc = -22
1009<3>[ 7.153537] qpnp-smbcharger qpnp-smbcharger-18: node /soc/qcom,spmi@200f000/qcom,pmi8950@2/qcom,qpnp-smbcharger IO resource absent!
1010<6>[ 7.189089] qpnp-smbcharger qpnp-smbcharger-18: SMBCHG successfully probe Charger version=SCHG_LITE Revision DIG:0.0 ANA:0.1 batt=1 dc=0 usb=1
1011<6>[ 7.190523] EDAC DEVICE0: Giving out device to module soc:arm64-cpu-erp controller cache: DEV soc:arm64-cpu-erp (INTERRUPT)
1012<3>[ 7.190957] ARM64 CPU ERP: Could not find <cci-irq> IRQ property. Proceeding anyway.
1013<3>[ 7.190962] ARM64 CPU ERP: SBE detection is disabled.
1014<5>[ 7.192209] Registered cp15_barrier emulation handler
1015<5>[ 7.192227] Registered setend emulation handler
1016<5>[ 7.192500] Loading compiled-in X.509 certificates
1017<5>[ 7.193333] Key type encrypted registered
1018<6>[ 7.258017] fastrpc soc:qcom,adsprpc-mem: for adsp_rh segments only will be dumped.
1019<6>[ 7.259926] RNDIS_IPA module is loaded.
1020<6>[ 7.260332] file system registered
1021<6>[ 7.260383] mbim_init: initialize 1 instances
1022<6>[ 7.260436] mbim_init: Initialized 1 ports
1023<6>[ 7.261621] rndis_qc_init: initialize rndis QC instance
1024<6>[ 7.261810] Number of LUNs=8
1025<6>[ 7.261819] Mass Storage Function, version: 2009/09/11
1026<6>[ 7.261826] LUN: removable file: (no medium)
1027<6>[ 7.261838] Number of LUNs=1
1028<6>[ 7.261880] LUN: removable file: (no medium)
1029<6>[ 7.261885] Number of LUNs=1
1030<6>[ 7.262109] android_usb gadget: android_usb ready
1031<6>[ 7.263370] input: gpio-keys as /devices/soc/soc:gpio_keys/input/input4
1032<6>[ 7.263682] qcom,qpnp-rtc qpnp-rtc-8: setting system clock to 1970-08-25 10:22:19 UTC (20427739)
1033<6>[ 7.264047] pwm-ir soc:pwm_ir: reg-id = vdd, low-active = 0, use-timer = 0
1034<6>[ 7.264319] Registered IR keymap rc-lirc
1035<6>[ 7.264471] input: pwm-ir as /devices/soc/soc:pwm_ir/rc/rc0/input5
1036<6>[ 7.264530] rc0: pwm-ir as /devices/soc/soc:pwm_ir/rc/rc0
1037<6>[ 7.264658] rc rc0: lirc_dev: driver ir-lirc-codec (pwm-ir) registered at minor = 0
1038<6>[ 7.267934] msm-core initialized without polling period
1039<3>[ 7.271194] parse_cpu_levels: idx 1 276
1040<3>[ 7.271207] calculate_residency: residency < 0 for LPM
1041<3>[ 7.271358] parse_cpu_levels: idx 1 286
1042<3>[ 7.271366] calculate_residency: residency < 0 for LPM
1043<3>[ 7.275231] qcom,qpnp-flash-led qpnp-flash-led-25: Unable to acquire pinctrl
1044<6>[ 7.277255] rmnet_ipa started initialization
1045<6>[ 7.277262] IPA SSR support = True
1046<6>[ 7.277267] IPA ipa-loaduC = True
1047<6>[ 7.277272] IPA SG support = True
1048<3>[ 7.279153] ipa ipa_sps_irq_control_all:938 EP (5) not allocated.
1049<3>[ 7.279160] ipa ipa2_uc_state_check:301 uC is not loaded
1050<6>[ 7.280145] rmnet_ipa completed initialization
1051<6>[ 7.284845] qcom,cc-debug-8953 1874000.qcom,cc-debug: Registered Debug Mux successfully
1052<4>[ 7.285327] msm8x16_wcd_spmi_probe(6167):slave ID = 0x1
1053<4>[ 7.285354] msm8x16_wcd_spmi_probe(6167):slave ID = 0x1
1054<6>[ 7.295868] msm8952-asoc-wcd c051000.sound: default codec configured
1055<3>[ 7.299370] msm8952-asoc-wcd c051000.sound: ASoC: platform (null) not registered
1056<3>[ 7.299413] msm8952-asoc-wcd c051000.sound: snd_soc_register_card failed (-517)
1057<6>[ 7.300649] vdd_vreg: disabling
1058<6>[ 7.300656] adv_vreg: disabling
1059<6>[ 7.300683] gfx_mem_acc_corner: disabling
1060<6>[ 7.300688] apc_mem_acc_corner: disabling
1061<6>[ 7.300698] clock_late_init: Removing enables held for handed-off clocks
1062<6>[ 7.304502] ALSA device list:
1063<6>[ 7.304507] No soundcards found.
1064<3>[ 7.304577] Warning: unable to open an initial console.
1065<6>[ 7.304889] Freeing unused kernel memory: 928K (ffffffc0016b8000 - ffffffc0017a0000)
1066<6>[ 7.304923] Freeing alternatives memory: 80K (ffffffc0017a0000 - ffffffc0017b4000)
1067<13>[ 7.306116] init: init first stage started!
1068<7>[ 7.310638] SELinux: 2048 avtab hash slots, 6784 rules.
1069<7>[ 7.314336] SELinux: 2048 avtab hash slots, 6784 rules.
1070<7>[ 7.314354] SELinux: 1 users, 2 roles, 662 types, 0 bools, 1 sens, 1024 cats
1071<7>[ 7.314360] SELinux: 63 classes, 6784 rules
1072<6>[ 7.315730] SELinux: Class can_socket not defined in policy.
1073<6>[ 7.315738] SELinux: the above unknown classes and permissions will be denied
1074<7>[ 7.315767] SELinux: Completing initialization.
1075<7>[ 7.315770] SELinux: Setting up existing superblocks.
1076<7>[ 7.315782] SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
1077<7>[ 7.315802] SELinux: initialized (dev rootfs, type rootfs), uses genfs_contexts
1078<7>[ 7.316961] SELinux: initialized (dev bdev, type bdev), not configured for labeling
1079<7>[ 7.316972] SELinux: initialized (dev proc, type proc), uses genfs_contexts
1080<7>[ 7.316992] SELinux: initialized (dev debugfs, type debugfs), uses genfs_contexts
1081<7>[ 7.349258] SELinux: initialized (dev sockfs, type sockfs), uses task SIDs
1082<7>[ 7.349271] SELinux: initialized (dev pipefs, type pipefs), uses task SIDs
1083<7>[ 7.349280] SELinux: initialized (dev anon_inodefs, type anon_inodefs), not configured for labeling
1084<7>[ 7.349287] SELinux: initialized (dev aio, type aio), not configured for labeling
1085<7>[ 7.349296] SELinux: initialized (dev devpts, type devpts), uses transition SIDs
1086<7>[ 7.349316] SELinux: initialized (dev configfs, type configfs), uses genfs_contexts
1087<7>[ 7.349330] SELinux: initialized (dev selinuxfs, type selinuxfs), uses genfs_contexts
1088<7>[ 7.349391] SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
1089<7>[ 7.349413] SELinux: initialized (dev sysfs, type sysfs), uses genfs_contexts
1090<5>[ 7.365565] audit: type=1403 audit(20427739.589:2): policy loaded auid=4294967295 ses=4294967295
1091<13>[ 7.366147] init: (Initializing SELinux non-enforcing took 0.06s.)
1092<13>[ 7.368369] init: init second stage started!
1093<13>[ 7.372469] init: Running restorecon...
1094<11>[ 7.428782] init: waitpid failed: No child processes
1095<13>[ 7.429225] init: (Loading properties from /default.prop took 0.00s.)
1096<11>[ 7.429739] init: /init.rc: 12: invalid keyword 'setcon'
1097<11>[ 7.429864] init: /init.rc: 64: invalid keyword 'load_all_props'
1098<13>[ 7.430129] init: (Parsing /init.recovery.usb.rc took 0.00s.)
1099<13>[ 7.430190] init: (Parsing /init.recovery.service.rc took 0.00s.)
1100<13>[ 7.430264] init: (Parsing /init.recovery.qcom.rc took 0.00s.)
1101<13>[ 7.430306] init: (Parsing /init.recovery.hlthchrg.rc took 0.00s.)
1102<13>[ 7.430319] init: (Parsing /init.rc took 0.00s.)
1103<5>[ 7.430427] audit: type=1400 audit(20427739.659:3): avc: denied { setcheckreqprot } for pid=1 comm="init" scontext=u:r:init:s0 tcontext=u:object_r:kernel:s0 tclass=security permissive=1
1104<13>[ 7.430507] init: Starting service 'ueventd'...
1105<13>[ 7.430858] init: Waiting for /dev/.coldboot_done...
1106<13>[ 7.432165] ueventd: ueventd started!
1107<13>[ 7.758334] ueventd: Coldboot took 0.32s.
1108<13>[ 7.763397] init: Waiting for /dev/.coldboot_done took 0.33s.
1109<7>[ 7.765197] SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
1110<7>[ 7.765822] SELinux: initialized (dev pstore, type pstore), uses genfs_contexts
1111<7>[ 7.766195] SELinux: initialized (dev functionfs, type functionfs), uses genfs_contexts
1112<5>[ 7.766569] audit: type=1400 audit(20427739.989:4): avc: denied { mounton } for pid=1 comm="init" path="/dev/usb-ffs/adb" dev="functionfs" ino=714 scontext=u:r:init:s0 tcontext=u:object_r:functionfs:s0 tclass=dir permissive=1
1113<6>[ 7.766592] ffs_data_put(): freeing
1114<3>[ 7.766661] enable_store: android_usb: already disabled
1115<13>[ 7.767133] init: (Loading properties from /system/build.prop took 0.00s.)
1116<13>[ 7.767159] init: (Loading properties from /vendor/build.prop took 0.00s.)
1117<13>[ 7.767183] init: (Loading properties from /factory/factory.prop took 0.00s.)
1118<5>[ 7.771433] random: nonblocking pool is initialized
1119<13>[ 7.771691] init: (Loading properties from /data/local.prop took 0.00s.)
1120<11>[ 7.771717] init: Unable to open persistent property directory "/data/property": No such file or directory
1121<13>[ 7.772185] init: Starting service 'set_permissive'...
1122<13>[ 7.772505] init: Starting service 'recovery'...
1123<13>[ 7.772736] init: Starting service 'healthd'...
1124<5>[ 7.773073] audit: type=1400 audit(20427739.999:5): avc: denied { create } for pid=1 comm="init" name="init.recovery.usb.rc.bak" scontext=u:r:init:s0 tcontext=u:object_r:rootfs:s0 tclass=file permissive=1
1125<5>[ 7.773126] audit: type=1400 audit(20427739.999:6): avc: denied { write } for pid=1 comm="init" path="/etc/init.recovery.usb.rc.bak" dev="rootfs" ino=15866 scontext=u:r:init:s0 tcontext=u:object_r:rootfs:s0 tclass=file permissive=1
1126<13>[ 7.773632] init: Starting service 'adbd'...
1127<12>[ 7.775417] healthd: BatteryCycleCountPath not found
1128<6>[ 7.777149] read descriptors
1129<6>[ 7.777163] read strings
1130<5>[ 7.786892] audit: type=1400 audit(20427740.009:7): avc: denied { write } for pid=395 comm="setenforce" name="enforce" dev="selinuxfs" ino=4 scontext=u:r:recovery:s0 tcontext=u:object_r:selinuxfs:s0 tclass=file permissive=1
1131<13>[ 7.787926] init: Service 'set_permissive' (pid 388) exited with status 0
1132<11>[ 7.821667] init: avc: denied { set } for property=twrp.crash_counter pid=389 uid=0 gid=0 scontext=u:r:recovery:s0 tcontext=u:object_r:default_prop:s0 tclass=property_service permissive=1
1133<6>[ 7.836852] [info] goodix_fb_state_chg_callback go to the goodix_fb_state_chg_callback value = 16
1134<4>[ 7.836970] [FTS] FTS_GESTRUE suspend
1135<4>[ 7.850203] [FTS]tpd_suspend4 0 [FTS]TPD gesture write 0x01 OK
1136<4>[ 7.850204] [FTS] FTS_GESTRUE suspend end
1137<6>[ 7.850224] [info] goodix_fb_state_chg_callback go to the goodix_fb_state_chg_callback value = 16
1138<6>[ 8.067952] android_work: android_work: sent uevent USB_STATE=CONNECTED
1139<4>[ 8.080167] ------------[ cut here ]------------
1140<4>[ 8.080177] WARNING: CPU: 0 PID: 389 at ../../../../../../kernel/xiaomi/mido/kernel/irq/manage.c:448 __enable_irq+0x4c/0x90()
1141<4>[ 8.080179] Unbalanced enable for IRQ 72
1142<4>[ 8.080183] CPU: 0 PID: 389 Comm: recovery Tainted: G W 3.18.31-perf-g79d883996 #1
1143<4>[ 8.080185] Hardware name: Qualcomm Technologies, Inc. MSM8953 QRD SKU3 (DT)
1144<0>[ 8.080187] Call trace:
1145<4>[ 8.080191] [<ffffffc00008a028>] dump_backtrace+0x0/0x24c
1146<4>[ 8.080194] [<ffffffc00008a294>] show_stack+0x20/0x28
1147<4>[ 8.080199] [<ffffffc000fd0aac>] dump_stack+0x80/0xa4
1148<4>[ 8.080203] [<ffffffc0000a5194>] warn_slowpath_common+0x90/0xb8
1149<4>[ 8.080206] [<ffffffc0000a5278>] warn_slowpath_fmt+0x88/0xac
1150<4>[ 8.080209] [<ffffffc0000faf0c>] __enable_irq+0x4c/0x90
1151<4>[ 8.080212] [<ffffffc0000fafd4>] enable_irq+0x84/0xac
1152<4>[ 8.080217] [<ffffffc0007d4354>] ft5435_ts_resume.isra.10+0xb4/0xd8
1153<4>[ 8.080220] [<ffffffc0007d43d0>] fb_notifier_callback+0x58/0x7c
1154<4>[ 8.080224] [<ffffffc0000c340c>] notifier_call_chain+0x58/0x8c
1155<4>[ 8.080227] [<ffffffc0000c3748>] __blocking_notifier_call_chain+0x54/0x70
1156<4>[ 8.080230] [<ffffffc0000c379c>] blocking_notifier_call_chain+0x38/0x44
1157<4>[ 8.080235] [<ffffffc0004322c4>] fb_notifier_call_chain+0x30/0x3c
1158<4>[ 8.080237] [<ffffffc0004333fc>] fb_blank+0x9c/0xc4
1159<4>[ 8.080240] [<ffffffc000433940>] do_fb_ioctl+0x51c/0x5a4
1160<4>[ 8.080243] [<ffffffc00043408c>] fb_ioctl+0x54/0x64
1161<4>[ 8.080247] [<ffffffc0001dce7c>] do_vfs_ioctl+0x4ec/0x5e0
1162<4>[ 8.080249] [<ffffffc0001dcfdc>] SyS_ioctl+0x6c/0x94
1163<4>[ 8.080251] ---[ end trace 97fdc3d68b4b7043 ]---
1164<6>[ 8.109679] [info] goodix_fb_state_chg_callback go to the goodix_fb_state_chg_callback value = 16
1165<6>[ 8.176491] android_usb gadget: high-speed config #1: 86000c8.android_usb
1166<6>[ 8.176546] msm-dwc3 7000000.ssusb: Avail curr from USB = 500
1167<6>[ 8.230083] android_work: android_work: sent uevent USB_STATE=CONFIGURED
1168<4>[ 8.336559] [FTS] FTS_GESTRUE suspend
1169<4>[ 8.350220] [FTS]tpd_suspend4 0 [FTS]TPD gesture write 0x01 OK
1170<4>[ 8.350221] [FTS] FTS_GESTRUE suspend end
1171<6>[ 8.350260] [info] goodix_fb_state_chg_callback go to the goodix_fb_state_chg_callback value = 16
1172<4>[ 8.780216] ------------[ cut here ]------------
1173<4>[ 8.780227] WARNING: CPU: 1 PID: 389 at ../../../../../../kernel/xiaomi/mido/kernel/irq/manage.c:448 __enable_irq+0x4c/0x90()
1174<4>[ 8.780228] Unbalanced enable for IRQ 72
1175<4>[ 8.780233] CPU: 1 PID: 389 Comm: recovery Tainted: G W 3.18.31-perf-g79d883996 #1
1176<4>[ 8.780235] Hardware name: Qualcomm Technologies, Inc. MSM8953 QRD SKU3 (DT)
1177<0>[ 8.780237] Call trace:
1178<4>[ 8.780241] [<ffffffc00008a028>] dump_backtrace+0x0/0x24c
1179<4>[ 8.780244] [<ffffffc00008a294>] show_stack+0x20/0x28
1180<4>[ 8.780248] [<ffffffc000fd0aac>] dump_stack+0x80/0xa4
1181<4>[ 8.780253] [<ffffffc0000a5194>] warn_slowpath_common+0x90/0xb8
1182<4>[ 8.780255] [<ffffffc0000a5278>] warn_slowpath_fmt+0x88/0xac
1183<4>[ 8.780258] [<ffffffc0000faf0c>] __enable_irq+0x4c/0x90
1184<4>[ 8.780261] [<ffffffc0000fafd4>] enable_irq+0x84/0xac
1185<4>[ 8.780266] [<ffffffc0007d4354>] ft5435_ts_resume.isra.10+0xb4/0xd8
1186<4>[ 8.780269] [<ffffffc0007d43d0>] fb_notifier_callback+0x58/0x7c
1187<4>[ 8.780273] [<ffffffc0000c340c>] notifier_call_chain+0x58/0x8c
1188<4>[ 8.780276] [<ffffffc0000c3748>] __blocking_notifier_call_chain+0x54/0x70
1189<4>[ 8.780279] [<ffffffc0000c379c>] blocking_notifier_call_chain+0x38/0x44
1190<4>[ 8.780284] [<ffffffc0004322c4>] fb_notifier_call_chain+0x30/0x3c
1191<4>[ 8.780286] [<ffffffc0004333fc>] fb_blank+0x9c/0xc4
1192<4>[ 8.780289] [<ffffffc000433940>] do_fb_ioctl+0x51c/0x5a4
1193<4>[ 8.780292] [<ffffffc00043408c>] fb_ioctl+0x54/0x64
1194<4>[ 8.780296] [<ffffffc0001dce7c>] do_vfs_ioctl+0x4ec/0x5e0
1195<4>[ 8.780298] [<ffffffc0001dcfdc>] SyS_ioctl+0x6c/0x94
1196<4>[ 8.780300] ---[ end trace 97fdc3d68b4b7044 ]---
1197<5>[ 9.206112] audit: type=1400 audit(20427741.429:8): avc: denied { write } for pid=389 comm="recovery" name="etc" dev="rootfs" ino=7117 scontext=u:r:recovery:s0 tcontext=u:object_r:rootfs:s0 tclass=dir permissive=1
1198<5>[ 9.206141] audit: type=1400 audit(20427741.429:9): avc: denied { add_name } for pid=389 comm="recovery" name="mtab" scontext=u:r:recovery:s0 tcontext=u:object_r:rootfs:s0 tclass=dir permissive=1
1199<5>[ 9.206174] audit: type=1400 audit(20427741.429:10): avc: denied { create } for pid=389 comm="recovery" name="mtab" scontext=u:r:recovery:s0 tcontext=u:object_r:rootfs:s0 tclass=lnk_file permissive=1
1200<5>[ 9.206698] audit: type=1400 audit(20427741.429:11): avc: denied { create } for pid=389 comm="recovery" name="cust" scontext=u:r:recovery:s0 tcontext=u:object_r:rootfs:s0 tclass=dir permissive=1
1201<5>[ 9.316066] F2FS-fs (mmcblk0p49): Mounted with checkpoint version = 57b3
1202<7>[ 9.316780] SELinux: initialized (dev mmcblk0p49, type f2fs), uses xattr
1203<5>[ 9.404514] F2FS-fs (mmcblk0p49): Mounted with checkpoint version = 57b4
1204<7>[ 9.405298] SELinux: initialized (dev mmcblk0p49, type f2fs), uses xattr
1205<5>[ 9.492291] F2FS-fs (mmcblk0p49): Mounted with checkpoint version = 57b5
1206<7>[ 9.493069] SELinux: initialized (dev mmcblk0p49, type f2fs), uses xattr
1207<5>[ 9.580721] F2FS-fs (mmcblk0p49): Mounted with checkpoint version = 57b6
1208<7>[ 9.581353] SELinux: initialized (dev mmcblk0p49, type f2fs), uses xattr
1209<5>[ 9.616420] F2FS-fs (mmcblk0p25): Mounted with checkpoint version = 29
1210<7>[ 9.616444] SELinux: initialized (dev mmcblk0p25, type f2fs), uses xattr
1211<6>[ 10.135996] EXT4-fs (mmcblk0p24): mounted filesystem with ordered data mode. Opts:
1212<7>[ 10.136054] SELinux: initialized (dev mmcblk0p24, type ext4), uses xattr
1213<6>[ 10.151817] EXT4-fs (mmcblk0p48): recovery complete
1214<6>[ 10.151834] EXT4-fs (mmcblk0p48): mounted filesystem with ordered data mode. Opts:
1215<7>[ 10.151853] SELinux: initialized (dev mmcblk0p48, type ext4), uses xattr
1216<6>[ 10.166531] EXT4-fs (mmcblk0p26): recovery complete
1217<6>[ 10.166893] EXT4-fs (mmcblk0p26): mounted filesystem with ordered data mode. Opts:
1218<7>[ 10.166914] SELinux: initialized (dev mmcblk0p26, type ext4), uses xattr
1219<6>[ 10.166938] SELinux: Context u:object_r:persist_file:s0 is not valid (left unmapped).
1220<6>[ 10.980163] of_batterydata_get_best_profile: qrd_msm8953_desay_4100mah found
1221<6>[ 10.987628] FG: fg_batt_profile_init: Battery SOC: 84, V: 4199957uV
1222<6>[ 10.988016] of_batterydata_get_best_profile: qrd_msm8953_desay_4100mah found
1223<4>[ 13.263934] audit_printk_skb: 42 callbacks suppressed
1224<5>[ 13.263947] audit: type=1400 audit(20427745.489:26): avc: denied { read } for pid=389 comm="recovery" name="0" dev="mmcblk0p49" ino=2496 scontext=u:r:recovery:s0 tcontext=u:object_r:media_rw_data_file:s0 tclass=dir permissive=1
1225<5>[ 13.263976] audit: type=1400 audit(20427745.489:27): avc: denied { open } for pid=389 comm="recovery" path="/sdcard" dev="mmcblk0p49" ino=2496 scontext=u:r:recovery:s0 tcontext=u:object_r:media_rw_data_file:s0 tclass=dir permissive=1
1226<5>[ 13.281858] audit: type=1400 audit(20427745.509:28): avc: denied { getattr } for pid=389 comm="recovery" path="/sdcard/QTAudioEngine" dev="mmcblk0p49" ino=26985 scontext=u:r:recovery:s0 tcontext=u:object_r:media_rw_data_file:s0 tclass=file permissive=1
1227<5>[ 15.700678] audit: type=1400 audit(20427747.929:29): avc: denied { open } for pid=389 comm="recovery" path="/dev/__properties__/u:object_r:userinit_prop:s0" dev="tmpfs" ino=15816 scontext=u:r:recovery:s0 tcontext=u:object_r:userinit_prop:s0 tclass=file permissive=1
1228<5>[ 15.700712] audit: type=1400 audit(20427747.929:30): avc: denied { getattr } for pid=389 comm="recovery" path="/dev/__properties__/u:object_r:userinit_prop:s0" dev="tmpfs" ino=15816 scontext=u:r:recovery:s0 tcontext=u:object_r:userinit_prop:s0 tclass=file permissive=1
1229<5>[ 15.700784] audit: type=1400 audit(20427747.929:31): avc: denied { open } for pid=389 comm="recovery" path="/dev/__properties__/u:object_r:adbtcp_prop:s0" dev="tmpfs" ino=15817 scontext=u:r:recovery:s0 tcontext=u:object_r:adbtcp_prop:s0 tclass=file permissive=1
1230<5>[ 15.700810] audit: type=1400 audit(20427747.929:32): avc: denied { getattr } for pid=389 comm="recovery" path="/dev/__properties__/u:object_r:adbtcp_prop:s0" dev="tmpfs" ino=15817 scontext=u:r:recovery:s0 tcontext=u:object_r:adbtcp_prop:s0 tclass=file permissive=1
1231<5>[ 15.701546] audit: type=1400 audit(20427747.929:33): avc: denied { open } for pid=389 comm="recovery" path="/dev/__properties__/u:object_r:safemode_prop:s0" dev="tmpfs" ino=15826 scontext=u:r:recovery:s0 tcontext=u:object_r:safemode_prop:s0 tclass=file permissive=1
1232<5>[ 15.701571] audit: type=1400 audit(20427747.929:34): avc: denied { getattr } for pid=389 comm="recovery" path="/dev/__properties__/u:object_r:safemode_prop:s0" dev="tmpfs" ino=15826 scontext=u:r:recovery:s0 tcontext=u:object_r:safemode_prop:s0 tclass=file permissive=1
1233<5>[ 15.701625] audit: type=1400 audit(20427747.929:35): avc: denied { open } for pid=389 comm="recovery" path="/dev/__properties__/u:object_r:mmc_prop:s0" dev="tmpfs" ino=15827 scontext=u:r:recovery:s0 tcontext=u:object_r:mmc_prop:s0 tclass=file permissive=1
1234<11>[ 15.730479] init: avc: denied { set } for property=sys.usb.config pid=389 uid=0 gid=0 scontext=u:r:recovery:s0 tcontext=u:object_r:system_radio_prop:s0 tclass=property_service permissive=1
1235<13>[ 15.730546] init: Service 'adbd' is being killed...
1236<3>[ 15.730694] dwc3 7000000.dwc3: request ffffffc003808500 was not queued to ep0out
1237<13>[ 15.730901] init: Service 'adbd' is being killed...
1238<13>[ 15.731217] init: Service 'adbd' (pid 391) killed by signal 9
1239<13>[ 15.731231] init: Service 'adbd' (pid 391) killing any children in process group
1240<13>[ 15.731288] init: Starting service 'adbd'...
1241<6>[ 15.734088] read descriptors
1242<6>[ 15.734103] read strings
1243<6>[ 15.734131] mtp_bind_config
1244<6>[ 15.766832] EXT4-fs (mmcblk0p24): mounted filesystem with ordered data mode. Opts:
1245<7>[ 15.766859] SELinux: initialized (dev mmcblk0p24, type ext4), uses xattr
1246<6>[ 15.803055] EXT4-fs (mmcblk0p24): mounted filesystem with ordered data mode. Opts:
1247<7>[ 15.803082] SELinux: initialized (dev mmcblk0p24, type ext4), uses xattr
1248<3>[ 15.876395] dwc3_gadget_suspend_interrupt(): state:0. Ignore SUSPEND.
1249<6>[ 15.970802] msm-dwc3 7000000.ssusb: Avail curr from USB = 0
1250<6>[ 15.971092] android_work: android_work: sent uevent USB_STATE=DISCONNECTED
1251<6>[ 16.058993] android_work: android_work: sent uevent USB_STATE=CONNECTED
1252<6>[ 16.103249] android_usb gadget: high-speed config #1: 86000c8.android_usb
1253<6>[ 16.103345] msm-dwc3 7000000.ssusb: Avail curr from USB = 500
1254<6>[ 16.160080] android_work: android_work: sent uevent USB_STATE=CONFIGURED
1255<6>[ 16.534492] mtp_open
1256<6>[ 31.765417] [info] goodix_fb_state_chg_callback go to the goodix_fb_state_chg_callback value = 16
1257<4>[ 31.986309] [FTS] FTS_GESTRUE suspend
1258<4>[ 32.000207] [FTS]tpd_suspend4 0 [FTS]TPD gesture write 0x01 OK
1259<4>[ 32.000209] [FTS] FTS_GESTRUE suspend end
1260<6>[ 275.199078] [info] goodix_fb_state_chg_callback go to the goodix_fb_state_chg_callback value = 16
1261<4>[ 275.630215] ------------[ cut here ]------------
1262<4>[ 275.630227] WARNING: CPU: 0 PID: 389 at ../../../../../../kernel/xiaomi/mido/kernel/irq/manage.c:448 __enable_irq+0x4c/0x90()
1263<4>[ 275.630228] Unbalanced enable for IRQ 72
1264<4>[ 275.630233] CPU: 0 PID: 389 Comm: recovery Tainted: G W 3.18.31-perf-g79d883996 #1
1265<4>[ 275.630234] Hardware name: Qualcomm Technologies, Inc. MSM8953 QRD SKU3 (DT)
1266<0>[ 275.630236] Call trace:
1267<4>[ 275.630241] [<ffffffc00008a028>] dump_backtrace+0x0/0x24c
1268<4>[ 275.630244] [<ffffffc00008a294>] show_stack+0x20/0x28
1269<4>[ 275.630248] [<ffffffc000fd0aac>] dump_stack+0x80/0xa4
1270<4>[ 275.630253] [<ffffffc0000a5194>] warn_slowpath_common+0x90/0xb8
1271<4>[ 275.630256] [<ffffffc0000a5278>] warn_slowpath_fmt+0x88/0xac
1272<4>[ 275.630259] [<ffffffc0000faf0c>] __enable_irq+0x4c/0x90
1273<4>[ 275.630261] [<ffffffc0000fafd4>] enable_irq+0x84/0xac
1274<4>[ 275.630267] [<ffffffc0007d4354>] ft5435_ts_resume.isra.10+0xb4/0xd8
1275<4>[ 275.630270] [<ffffffc0007d43d0>] fb_notifier_callback+0x58/0x7c
1276<4>[ 275.630274] [<ffffffc0000c340c>] notifier_call_chain+0x58/0x8c
1277<4>[ 275.630277] [<ffffffc0000c3748>] __blocking_notifier_call_chain+0x54/0x70
1278<4>[ 275.630279] [<ffffffc0000c379c>] blocking_notifier_call_chain+0x38/0x44
1279<4>[ 275.630284] [<ffffffc0004322c4>] fb_notifier_call_chain+0x30/0x3c
1280<4>[ 275.630287] [<ffffffc0004333fc>] fb_blank+0x9c/0xc4
1281<4>[ 275.630290] [<ffffffc000433940>] do_fb_ioctl+0x51c/0x5a4
1282<4>[ 275.630293] [<ffffffc00043408c>] fb_ioctl+0x54/0x64
1283<4>[ 275.630296] [<ffffffc0001dce7c>] do_vfs_ioctl+0x4ec/0x5e0
1284<4>[ 275.630299] [<ffffffc0001dcfdc>] SyS_ioctl+0x6c/0x94
1285<4>[ 275.630300] ---[ end trace 97fdc3d68b4b7045 ]---
1286<3>[ 276.387078] sps: BAM device 0x0000000007884000 is not registered yet.
1287<6>[ 276.387356] sps:BAM 0x0000000007884000 is registered.
1288<6>[ 276.387582] sps:BAM 0x0000000007884000 (va:0xffffff8002360000) enabled: ver:0x19, number of pipes:12
1289<4>[ 323.980527] audit_printk_skb: 60 callbacks suppressed
1290<5>[ 323.980539] audit: type=1400 audit(20428055.249:56): avc: denied { write } for pid=449 comm="rm" name="0" dev="mmcblk0p49" ino=2496 scontext=u:r:recovery:s0 tcontext=u:object_r:media_rw_data_file:s0 tclass=dir permissive=1
1291<5>[ 323.980563] audit: type=1400 audit(20428055.249:57): avc: denied { remove_name } for pid=449 comm="rm" name="dmesg.log" dev="mmcblk0p49" ino=41219 scontext=u:r:recovery:s0 tcontext=u:object_r:media_rw_data_file:s0 tclass=dir permissive=1
1292<5>[ 323.980584] audit: type=1400 audit(20428055.249:58): avc: denied { unlink } for pid=449 comm="rm" name="dmesg.log" dev="mmcblk0p49" ino=41219 scontext=u:r:recovery:s0 tcontext=u:object_r:media_rw_data_file:s0 tclass=file permissive=1
1293<5>[ 395.505643] audit: type=1400 audit(20428126.769:59): avc: denied { add_name } for pid=389 comm="recovery" name="recovery.log" scontext=u:r:recovery:s0 tcontext=u:object_r:media_rw_data_file:s0 tclass=dir permissive=1
1294<5>[ 395.505675] audit: type=1400 audit(20428126.769:60): avc: denied { create } for pid=389 comm="recovery" name="recovery.log" scontext=u:r:recovery:s0 tcontext=u:object_r:media_rw_data_file:s0 tclass=file permissive=1
1295<5>[ 395.505800] audit: type=1400 audit(20428126.769:61): avc: denied { write } for pid=389 comm="recovery" path="/data/media/0/recovery.log" dev="mmcblk0p49" ino=41235 scontext=u:r:recovery:s0 tcontext=u:object_r:media_rw_data_file:s0 tclass=file permissive=1
1296<5>[ 395.506390] audit: type=1400 audit(20428126.769:62): avc: denied { setattr } for pid=389 comm="recovery" name="recovery.log" dev="mmcblk0p49" ino=41235 scontext=u:r:recovery:s0 tcontext=u:object_r:media_rw_data_file:s0 tclass=file permissive=1
1297<5>[ 395.506441] audit: type=1400 audit(20428126.769:63): avc: denied { relabelfrom } for pid=389 comm="recovery" name="recovery.log" dev="mmcblk0p49" ino=41235 scontext=u:r:recovery:s0 tcontext=u:object_r:media_rw_data_file:s0 tclass=file permissive=1
1298<5>[ 395.506469] audit: type=1400 audit(20428126.769:64): avc: denied { relabelto } for pid=389 comm="recovery" name="recovery.log" dev="mmcblk0p49" ino=41235 scontext=u:r:recovery:s0 tcontext=u:object_r:media_rw_data_file:s0 tclass=file permissive=1