· 6 years ago · Mar 24, 2020, 06:26 PM
1u-boot=> boot
21800 bytes read in 59 ms (29.3 KiB/s)
3## Executing script at 40480000
423112192 bytes read in 1391 ms (15.8 MiB/s)
544144 bytes read in 47 ms (917 KiB/s)
6104 bytes read in 65 ms (1000 Bytes/s)
7## Flattened Device Tree blob at 43000000
8 Booting using the fdt blob at 0x43000000
9 reserving fdt memory region: addr=43000000 size=b000
10 Using Device Tree in place at 0000000043000000, end 000000004300dfff
11
12Starting kernel ...
13
14[ 0.000000] Booting Linux on physical CPU 0x0
15[ 0.000000] Linux version 4.14.98-imx (pbuilder@e28c003e6359) (gcc version 8.3.0 (Debian 8.3.0-2)) #1 SMP PREEMPT Mon Jan 13 22:01:55 UTC 2020
16[ 0.000000] Boot CPU: AArch64 Processor [410fd034]
17[ 0.000000] Machine model: Freescale i.MX8MQ Phanbell
18[ 0.000000] earlycon: ec_imx6q0 at MMIO 0x0000000030860000 (options '115200')
19[ 0.000000] bootconsole [ec_imx6q0] enabled
20[ 0.000000] efi: Getting EFI parameters from FDT:
21[ 0.000000] efi: UEFI not found.
22[ 0.000000] Reserved memory: created CMA memory pool at 0x000000006c000000, size 320 MiB
23[ 0.000000] OF: reserved mem: initialized node linux,cma, compatible id shared-dma-pool
24[ 0.000000] NUMA: No NUMA configuration found
25[ 0.000000] NUMA: Faking a node at [mem 0x0000000000000000-0x000000007fffffff]
26[ 0.000000] NUMA: NODE_DATA [mem 0x6bfbc980-0x6bfbe77f]
27[ 0.000000] Zone ranges:
28[ 0.000000] DMA [mem 0x0000000040000000-0x000000007fffffff]
29[ 0.000000] Normal empty
30[ 0.000000] Movable zone start for each node
31[ 0.000000] Early memory node ranges
32[ 0.000000] node 0: [mem 0x0000000040000000-0x000000007fffffff]
33[ 0.000000] Initmem setup node 0 [mem 0x0000000040000000-0x000000007fffffff]
34[ 0.000000] psci: probing for conduit method from DT.
35[ 0.000000] psci: PSCIv1.1 detected in firmware.
36[ 0.000000] psci: Using standard PSCI v0.2 function IDs
37[ 0.000000] psci: MIGRATE_INFO_TYPE not supported.
38[ 0.000000] psci: SMC Calling Convention v1.1
39[ 0.000000] percpu: Embedded 24 pages/cpu @ffff80002bf57000 s57624 r8192 d32488 u98304
40[ 0.000000] Detected VIPT I-cache on CPU0
41[ 0.000000] CPU features: enabling workaround for ARM erratum 845719
42[ 0.000000] Speculative Store Bypass Disable mitigation not required
43[ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 258048
44[ 0.000000] Policy zone: DMA
45[ 0.000000] Kernel command line: console=ttymxc0,115200 console=tty0 earlycon=ec_imx6q,0x30860000,115200 root=/dev/mmcblk1p2 rootfstype=ext4 rw rootwait init=/sbin/init net.iff
46[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
47[ 0.000000] Memory: 680688K/1048576K available (13244K kernel code, 1770K rwdata, 6196K rodata, 1280K init, 470K bss, 40208K reserved, 327680K cma-reserved)
48[ 0.000000] Virtual kernel memory layout:
49[ 0.000000] modules : 0xffff000000000000 - 0xffff000008000000 ( 128 MB)
50[ 0.000000] vmalloc : 0xffff000008000000 - 0xffff7dffbfff0000 (129022 GB)
51[ 0.000000] .text : 0xffff000008080000 - 0xffff000008d70000 ( 13248 KB)
52[ 0.000000] .rodata : 0xffff000008d70000 - 0xffff000009390000 ( 6272 KB)
53[ 0.000000] .init : 0xffff000009390000 - 0xffff0000094d0000 ( 1280 KB)
54[ 0.000000] .data : 0xffff0000094d0000 - 0xffff00000968aa00 ( 1771 KB)
55[ 0.000000] .bss : 0xffff00000968aa00 - 0xffff0000097005a0 ( 471 KB)
56[ 0.000000] fixed : 0xffff7dfffe7f9000 - 0xffff7dfffec00000 ( 4124 KB)
57[ 0.000000] PCI I/O : 0xffff7dfffee00000 - 0xffff7dffffe00000 ( 16 MB)
58[ 0.000000] vmemmap : 0xffff7e0000000000 - 0xffff800000000000 ( 2048 GB maximum)
59[ 0.000000] 0xffff7e0000000000 - 0xffff7e0001000000 ( 16 MB actual)
60[ 0.000000] memory : 0xffff800000000000 - 0xffff800040000000 ( 1024 MB)
61[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
62[ 0.000000] Preemptible hierarchical RCU implementation.
63[ 0.000000] RCU restricting CPUs from NR_CPUS=64 to nr_cpu_ids=4.
64[ 0.000000] Tasks RCU enabled.
65[ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
66[ 0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0
67[ 0.000000] GICv3: GIC: Using split EOI/Deactivate mode
68[ 0.000000] GICv3: no VLPI support, no direct LPI support
69[ 0.000000] ITS: No ITS available, not enabling LPIs
70[ 0.000000] GICv3: CPU0: found redistributor 0 region 0:0x0000000038880000
71[ 0.000000] i.MX8MQ clock driver init done
72[ 0.000000] arch_timer: cp15 timer(s) running at 8.33MHz (phys).
73[ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x1ec0311ec, max_idle_ns: 440795202152 ns
74[ 0.000003] sched_clock: 56 bits at 8MHz, resolution 120ns, wraps every 2199023255541ns
75[ 0.008753] system counter timer init
76[ 0.011726] sched_clock: 56 bits at 8MHz, resolution 120ns, wraps every 2199023255541ns
77[ 0.019709] clocksource: imx sysctr: mask: 0xffffffffffffff max_cycles: 0x1ec0311ec, max_idle_ns: 440795202152 ns
78[ 0.030869] Console: colour dummy device 80x25
79[ 0.034446] console [tty0] enabled
80[ 0.037857] bootconsole [ec_imx6q0] disabled
81[ 0.000000] Booting Linux on physical CPU 0x0
82[ 0.000000] Linux version 4.14.98-imx (pbuilder@e28c003e6359) (gcc version 8.3.0 (Debian 8.3.0-2)) #1 SMP PREEMPT Mon Jan 13 22:01:55 UTC 2020
83[ 0.000000] Boot CPU: AArch64 Processor [410fd034]
84[ 0.000000] Machine model: Freescale i.MX8MQ Phanbell
85[ 0.000000] earlycon: ec_imx6q0 at MMIO 0x0000000030860000 (options '115200')
86[ 0.000000] bootconsole [ec_imx6q0] enabled
87[ 0.000000] efi: Getting EFI parameters from FDT:
88[ 0.000000] efi: UEFI not found.
89[ 0.000000] Reserved memory: created CMA memory pool at 0x000000006c000000, size 320 MiB
90[ 0.000000] OF: reserved mem: initialized node linux,cma, compatible id shared-dma-pool
91[ 0.000000] NUMA: No NUMA configuration found
92[ 0.000000] NUMA: Faking a node at [mem 0x0000000000000000-0x000000007fffffff]
93[ 0.000000] NUMA: NODE_DATA [mem 0x6bfbc980-0x6bfbe77f]
94[ 0.000000] Zone ranges:
95[ 0.000000] DMA [mem 0x0000000040000000-0x000000007fffffff]
96[ 0.000000] Normal empty
97[ 0.000000] Movable zone start for each node
98[ 0.000000] Early memory node ranges
99[ 0.000000] node 0: [mem 0x0000000040000000-0x000000007fffffff]
100[ 0.000000] Initmem setup node 0 [mem 0x0000000040000000-0x000000007fffffff]
101[ 0.000000] psci: probing for conduit method from DT.
102[ 0.000000] psci: PSCIv1.1 detected in firmware.
103[ 0.000000] psci: Using standard PSCI v0.2 function IDs
104[ 0.000000] psci: MIGRATE_INFO_TYPE not supported.
105[ 0.000000] psci: SMC Calling Convention v1.1
106[ 0.000000] percpu: Embedded 24 pages/cpu @ffff80002bf57000 s57624 r8192 d32488 u98304
107[ 0.000000] Detected VIPT I-cache on CPU0
108[ 0.000000] CPU features: enabling workaround for ARM erratum 845719
109[ 0.000000] Speculative Store Bypass Disable mitigation not required
110[ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 258048
111[ 0.000000] Policy zone: DMA
112[ 0.000000] Kernel command line: console=ttymxc0,115200 console=tty0 earlycon=ec_imx6q,0x30860000,115200 root=/dev/mmcblk1p2 rootfstype=ext4 rw rootwait init=/sbin/init net.iff
113[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
114[ 0.000000] Memory: 680688K/1048576K available (13244K kernel code, 1770K rwdata, 6196K rodata, 1280K init, 470K bss, 40208K reserved, 327680K cma-reserved)
115[ 0.000000] Virtual kernel memory layout:
116[ 0.000000] modules : 0xffff000000000000 - 0xffff000008000000 ( 128 MB)
117[ 0.000000] vmalloc : 0xffff000008000000 - 0xffff7dffbfff0000 (129022 GB)
118[ 0.000000] .text : 0xffff000008080000 - 0xffff000008d70000 ( 13248 KB)
119[ 0.000000] .rodata : 0xffff000008d70000 - 0xffff000009390000 ( 6272 KB)
120[ 0.000000] .init : 0xffff000009390000 - 0xffff0000094d0000 ( 1280 KB)
121[ 0.000000] .data : 0xffff0000094d0000 - 0xffff00000968aa00 ( 1771 KB)
122[ 0.000000] .bss : 0xffff00000968aa00 - 0xffff0000097005a0 ( 471 KB)
123[ 0.000000] fixed : 0xffff7dfffe7f9000 - 0xffff7dfffec00000 ( 4124 KB)
124[ 0.000000] PCI I/O : 0xffff7dfffee00000 - 0xffff7dffffe00000 ( 16 MB)
125[ 0.000000] vmemmap : 0xffff7e0000000000 - 0xffff800000000000 ( 2048 GB maximum)
126[ 0.000000] 0xffff7e0000000000 - 0xffff7e0001000000 ( 16 MB actual)
127[ 0.000000] memory : 0xffff800000000000 - 0xffff800040000000 ( 1024 MB)
128[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
129[ 0.000000] Preemptible hierarchical RCU implementation.
130[ 0.000000] RCU restricting CPUs from NR_CPUS=64 to nr_cpu_ids=4.
131[ 0.000000] Tasks RCU enabled.
132[ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
133[ 0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0
134[ 0.000000] GICv3: GIC: Using split EOI/Deactivate mode
135[ 0.000000] GICv3: no VLPI support, no direct LPI support
136[ 0.000000] ITS: No ITS available, not enabling LPIs
137[ 0.000000] GICv3: CPU0: found redistributor 0 region 0:0x0000000038880000
138[ 0.000000] i.MX8MQ clock driver init done
139[ 0.000000] arch_timer: cp15 timer(s) running at 8.33MHz (phys).
140[ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x1ec0311ec, max_idle_ns: 440795202152 ns
141[ 0.000003] sched_clock: 56 bits at 8MHz, resolution 120ns, wraps every 2199023255541ns
142[ 0.008753] system counter timer init
143[ 0.011726] sched_clock: 56 bits at 8MHz, resolution 120ns, wraps every 2199023255541ns
144[ 0.019709] clocksource: imx sysctr: mask: 0xffffffffffffff max_cycles: 0x1ec0311ec, max_idle_ns: 440795202152 ns
145[ 0.030869] Console: colour dummy device 80x25
146[ 0.034446] console [tty0] enabled
147[ 0.037857] bootconsole [ec_imx6q0] disabled
148[ 0.042170] Calibrating delay loop (skipped), value calculated using timer frequency.. 16.66 BogoMIPS (lpj=33333)
149[ 0.042192] pid_max: default: 32768 minimum: 301
150[ 0.042270] Security Framework initialized
151[ 0.042598] Dentry cache hash table entries: 131072 (order: 8, 1048576 bytes)
152[ 0.042767] Inode-cache hash table entries: 65536 (order: 7, 524288 bytes)
153[ 0.042797] Mount-cache hash table entries: 2048 (order: 2, 16384 bytes)
154[ 0.042817] Mountpoint-cache hash table entries: 2048 (order: 2, 16384 bytes)
155[ 0.058202] ASID allocator initialised with 32768 entries
156[ 0.066203] Hierarchical SRCU implementation.
157[ 0.074669] Cannot find MU entry in device tree
158[ 0.074808] CPU identified as i.MX8MQ, silicon rev 2.0
159[ 0.075608] EFI services will not be available.
160[ 0.082246] smp: Bringing up secondary CPUs ...
161[ 0.110405] Detected VIPT I-cache on CPU1
162[ 0.110434] GICv3: CPU1: found redistributor 1 region 0:0x00000000388a0000
163[ 0.110464] CPU1: Booted secondary processor [410fd034]
164[ 0.138467] Detected VIPT I-cache on CPU2
165[ 0.138488] GICv3: CPU2: found redistributor 2 region 0:0x00000000388c0000
166[ 0.138513] CPU2: Booted secondary processor [410fd034]
167[ 0.166543] Detected VIPT I-cache on CPU3
168[ 0.166566] GICv3: CPU3: found redistributor 3 region 0:0x00000000388e0000
169[ 0.166591] CPU3: Booted secondary processor [410fd034]
170[ 0.166801] smp: Brought up 1 node, 4 CPUs
171[ 0.166884] SMP: Total of 4 processors activated.
172[ 0.166897] CPU features: detected feature: GIC system register CPU interface
173[ 0.166912] CPU features: detected feature: 32-bit EL0 Support
174[ 0.166925] CPU features: detected feature: Kernel page table isolation (KPTI)
175[ 0.196157] CPU: All CPU(s) started at EL2
176[ 0.196334] alternatives: patching kernel code
177[ 0.197425] devtmpfs: initialized
178[ 0.203128] random: get_random_u32 called from bucket_table_alloc+0x104/0x268 with crng_init=0
179[ 0.204204] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
180[ 0.204258] futex hash table entries: 1024 (order: 5, 131072 bytes)
181[ 0.212820] pinctrl core: initialized pinctrl subsystem
182[ 0.215222] DMI not present or invalid.
183[ 0.215667] NET: Registered protocol family 16
184[ 0.219292] cpuidle: using governor menu
185[ 0.220233] vdso: 2 pages (1 code @ ffff000008d76000, 1 data @ ffff0000094d4000)
186[ 0.220258] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers.
187[ 0.232459] DMA: preallocated 256 KiB pool for atomic allocations
188[ 0.233937] Serial: AMBA PL011 UART driver
189[ 0.234328] imx rpmsg driver is registered.
190[ 0.241867] imx8mq-pinctrl 30330000.iomuxc: initialized IMX pinctrl driver
191[ 0.251292] MU is ready for cross core communication!
192[ 0.252851] virtio_rpmsg_bus virtio0: rpmsg host is online
193[ 0.275088] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
194[ 0.286837] ACPI: Interpreter disabled.
195[ 0.804843] vgaarb: loaded
196[ 0.805362] SCSI subsystem initialized
197[ 0.806640] usbcore: registered new interface driver usbfs
198[ 0.806745] usbcore: registered new interface driver hub
199[ 0.807119] usbcore: registered new device driver usb
200[ 0.815823] bd71837 0-004b: Device ID=0xA2
201[ 0.815839] bd71837 0-004b: gpio_intr = 3
202[ 0.815853] bd71837 0-004b: chip_irq=71
203[ 0.852020] bd71837-pmic bd71837-pmic: regulator register name 'buck1'
204[ 0.896268] bd71837-pmic bd71837-pmic: regulator register name 'buck2'
205[ 0.932314] bd71837-pmic bd71837-pmic: regulator register name 'buck3'
206[ 0.968379] bd71837-pmic bd71837-pmic: regulator register name 'buck4'
207[ 1.004449] bd71837-pmic bd71837-pmic: regulator register name 'buck5'
208[ 1.036516] bd71837-pmic bd71837-pmic: regulator register name 'buck6'
209[ 1.068571] bd71837-pmic bd71837-pmic: regulator register name 'buck7'
210[ 1.084882] bd71837-pmic bd71837-pmic: regulator register name 'buck8'
211[ 1.100926] bd71837-pmic bd71837-pmic: regulator register name 'ldo1'
212[ 1.116982] bd71837-pmic bd71837-pmic: regulator register name 'ldo2'
213[ 1.120945] bd71837-pmic bd71837-pmic: regulator register name 'ldo3'
214[ 1.136971] bd71837-pmic bd71837-pmic: regulator register name 'ldo4'
215[ 1.153014] bd71837-pmic bd71837-pmic: regulator register name 'ldo5'
216[ 1.169057] bd71837-pmic bd71837-pmic: regulator register name 'ldo6'
217[ 1.185105] bd71837-pmic bd71837-pmic: regulator register name 'ldo7'
218[ 1.188973] random: fast init done
219[ 1.201156] bd71837-pmic bd71837-pmic: Buck1: DVS Run-Idle-Susp[900000 - 900000 - 800000].
220[ 1.213082] bd71837-pmic bd71837-pmic: Buck2: DVS Run-Idle-Susp[1000000 - 900000 - 0].
221[ 1.221103] bd71837-pmic bd71837-pmic: Buck3: DVS Run-Idle-Susp[900000 - 0 - 0].
222[ 1.225060] bd71837-pmic bd71837-pmic: Buck4: DVS Run-Idle-Susp[900000 - 0 - 0].
223[ 1.241369] i2c i2c-0: IMX I2C adapter registered
224[ 1.241388] i2c i2c-0: can't use DMA, using PIO instead.
225[ 1.242253] i2c i2c-1: IMX I2C adapter registered
226[ 1.242271] i2c i2c-1: can't use DMA, using PIO instead.
227[ 1.242957] i2c i2c-2: IMX I2C adapter registered
228[ 1.242974] i2c i2c-2: can't use DMA, using PIO instead.
229[ 1.244468] media: Linux media interface: v0.10
230[ 1.244560] Linux video capture interface: v2.00
231[ 1.244957] pps_core: LinuxPPS API ver. 1 registered
232[ 1.244970] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
233[ 1.245076] PTP clock support registered
234[ 1.245453] EDAC MC: Ver: 3.0.0
235[ 1.246197] dmi: Firmware registration failed.
236[ 1.246983] Advanced Linux Sound Architecture Driver Initialized.
237[ 1.247685] Bluetooth: Core ver 2.22
238[ 1.247774] NET: Registered protocol family 31
239[ 1.247787] Bluetooth: HCI device and connection manager initialized
240[ 1.247804] Bluetooth: HCI socket layer initialized
241[ 1.247819] Bluetooth: L2CAP socket layer initialized
242[ 1.247846] Bluetooth: SCO socket layer initialized
243[ 1.248741] BD71837:bd71837_pmic_interrupt() in.
244[ 1.249761] clocksource: Switched to clocksource arch_sys_counter
245[ 1.250044] VFS: Disk quotas dquot_6.6.0
246[ 1.250101] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
247[ 1.250277] pnp: PnP ACPI: disabled
248[ 1.252774] BD71837:IRQ_WDOG
249[ 1.252785] BD71837:IRQ_ON_REQ
250[ 1.267772] NET: Registered protocol family 2
251[ 1.268287] TCP established hash table entries: 8192 (order: 4, 65536 bytes)
252[ 1.268386] TCP bind hash table entries: 8192 (order: 5, 131072 bytes)
253[ 1.268525] TCP: Hash tables configured (established 8192 bind 8192)
254[ 1.268607] UDP hash table entries: 512 (order: 2, 16384 bytes)
255[ 1.268647] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
256[ 1.268768] NET: Registered protocol family 1
257[ 1.269900] RPC: Registered named UNIX socket transport module.
258[ 1.269915] RPC: Registered udp transport module.
259[ 1.269926] RPC: Registered tcp transport module.
260[ 1.269937] RPC: Registered tcp NFSv4.1 backchannel transport module.
261[ 1.271527] hw perfevents: enabled with armv8_pmuv3 PMU driver, 7 counters available
262[ 1.272125] kvm [1]: 8-bit VMID
263[ 1.273046] kvm [1]: GICv3: no GICV resource entry
264[ 1.273060] kvm [1]: disabling GICv2 emulation
265[ 1.273186] kvm [1]: GIC system register CPU interface enabled
266[ 1.273561] kvm [1]: vgic interrupt IRQ1
267[ 1.274116] kvm [1]: Hyp mode initialized successfully
268[ 1.282395] audit: initializing netlink subsys (disabled)
269[ 1.282705] audit: type=2000 audit(1.247:1): state=initialized audit_enabled=0 res=1
270[ 1.283344] workingset: timestamp_bits=44 max_order=18 bucket_order=0
271[ 1.293474] squashfs: version 4.0 (2009/01/31) Phillip Lougher
272[ 1.294604] NFS: Registering the id_resolver key type
273[ 1.294633] Key type id_resolver registered
274[ 1.294644] Key type id_legacy registered
275[ 1.294662] nfs4filelayout_init: NFSv4 File Layout Driver Registering...
276[ 1.294692] jffs2: version 2.2. (NAND) �© 2001-2006 Red Hat, Inc.
277[ 1.295296] 9p: Installing v9fs 9p2000 file system support
278[ 1.315436] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 245)
279[ 1.315849] io scheduler noop registered
280[ 1.316015] io scheduler cfq registered (default)
281[ 1.316029] io scheduler mq-deadline registered
282[ 1.316041] io scheduler kyber registered
283[ 1.339316] mxs-dma 33000000.dma-apbh: initialized
284[ 1.341002] Bus freq driver module loaded
285[ 1.343016] Config NOC for VPU and CPU
286[ 1.355266] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
287[ 1.358783] SuperH (H)SCI(F) driver initialized
288[ 1.359632] 30860000.serial: ttymxc0 at MMIO 0x30860000 (irq = 41, base_baud = 1562500) is a IMX
289[ 2.552658] console [ttymxc0] enabled
290[ 2.557258] 30880000.serial: ttymxc2 at MMIO 0x30880000 (irq = 42, base_baud = 1562500) is a IMX
291[ 2.566950] clk: failed to reparent uart2 to sys1_pll_160m: -22
292[ 2.573076] 30890000.serial: ttymxc1 at MMIO 0x30890000 (irq = 43, base_baud = 1562500) is a IMX
293[ 2.583078] msm_serial: driver initialized
294[ 2.601690] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
295[ 2.608344] [drm] No driver support for vblank timestamp query.
296[ 2.614414] imx-drm display-subsystem: bound imx-dcss-crtc.0 (ops dcss_crtc_ops)
297[ 2.622069] [drm] CDN_API_General_Test_Echo_Ext_blocking - APB(ret = 0 echo_resp = echo test)
298[ 2.630623] [drm] CDN_API_General_getCurVersion - ver 13196 verlib 13062
299[ 2.637440] [drm] Pixel clock frequency: 594000 KHz, character clock frequency: 594000, color depth is 8-bit.
300[ 2.647386] [drm] Pixel clock frequency (594000 KHz) is supported in this color depth (8-bit). Settings found in row 27
301[ 2.658248] [drm] VCO frequency is 5940000
302[ 2.662365] [drm] VCO frequency (5940000 KHz) is supported. Settings found in row 14
303[ 2.694203] [drm] CDN_API_General_Write_Register_blocking LANES_CONFIG ret = 0
304[ 2.701471] [drm] Failed to get HDCP config - using HDCP 2.2 only
305[ 2.707673] [drm] Failed to initialize HDCP
306[ 2.713600] [drm] hdmi-audio-codec driver bound to HDMI
307[ 2.718861] imx-drm display-subsystem: bound 32c00000.hdmi (ops imx_hdp_imx_ops)
308[ 2.726383] [drm] Cannot find any crtc or sizes
309[ 2.731447] [drm] Initialized imx-drm 1.0.0 20120507 for display-subsystem on minor 0
310[ 2.746986] loop: module loaded
311[ 2.755167] slram: not enough parameters.
312[ 2.761185] spi_imx 30820000.ecspi: dma setup error -19, use pio
313[ 2.768748] spi_imx 30820000.ecspi: probed
314[ 2.775852] libphy: Fixed MDIO Bus: probed
315[ 2.781160] NXP PHY: loading NXP PHY driver: [autonomous mode]
316[ 2.787441] tun: Universal TUN/TAP device driver, 1.6
317[ 2.792870] CAN device driver interface
318[ 2.799083] fec 30be0000.ethernet: 30be0000.ethernet supply phy not found, using dummy regulator
319[ 2.808519] pps pps0: new PPS source ptp0
320[ 2.817219] libphy: fec_enet_mii_bus: probed
321[ 2.823022] fec 30be0000.ethernet eth0: registered PHC device 0
322[ 2.829947] e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k
323[ 2.835802] e1000e: Copyright(c) 1999 - 2015 Intel Corporation.
324[ 2.841917] igb: Intel(R) Gigabit Ethernet Network Driver - version 5.4.0-k
325[ 2.848900] igb: Copyright (c) 2007-2014 Intel Corporation.
326[ 2.854631] igbvf: Intel(R) Gigabit Virtual Function Network Driver - version 2.4.0-k
327[ 2.862484] igbvf: Copyright (c) 2009 - 2012 Intel Corporation.
328[ 2.869109] sky2: driver version 1.30
329[ 2.881811] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
330[ 2.888372] ehci-pci: EHCI PCI platform driver
331[ 2.892978] ehci-platform: EHCI generic platform driver
332[ 2.898447] ehci-orion: EHCI orion driver
333[ 2.902708] ehci-exynos: EHCI EXYNOS driver
334[ 2.907089] ehci-msm: Qualcomm On-Chip EHCI Host Controller
335[ 2.912891] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
336[ 2.919103] ohci-pci: OHCI PCI platform driver
337[ 2.923706] ohci-platform: OHCI generic platform driver
338[ 2.929153] ohci-exynos: OHCI EXYNOS driver
339[ 2.934049] Can't support > 32 bit dma.
340[ 2.937998] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller
341[ 2.943519] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 1
342[ 2.956711] xhci-hcd xhci-hcd.0.auto: hcc params 0x0220fe6c hci version 0x110 quirks 0x0000000001010810
343[ 2.966242] xhci-hcd xhci-hcd.0.auto: irq 230, io mem 0x38200000
344[ 2.973013] hub 1-0:1.0: USB hub found
345[ 2.976864] hub 1-0:1.0: 1 port detected
346[ 2.981161] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller
347[ 2.986732] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 2
348[ 2.994420] xhci-hcd xhci-hcd.0.auto: Host supports USB 3.0 SuperSpeed
349[ 3.001779] hub 2-0:1.0: USB hub found
350[ 3.005556] hub 2-0:1.0: 1 port detected
351[ 3.010473] usbcore: registered new interface driver usb-storage
352[ 3.016690] usbcore: registered new interface driver usbserial
353[ 3.022689] usbcore: registered new interface driver cp210x
354[ 3.028357] usbserial: USB Serial support registered for cp210x
355[ 3.034448] usbcore: registered new interface driver usb_ehset_test
356[ 3.044272] input: 30370000.snvs:snvs-powerkey as /devices/platform/30370000.snvs/30370000.snvs:snvs-powerkey/input/input0
357[ 3.058568] snvs_rtc 30370000.snvs:snvs-rtc-lp: rtc core: registered 30370000.snvs:snvs-rtc-lp as rtc0
358[ 3.068633] i2c /dev entries driver
359[ 3.075270] IR NEC protocol handler initialized
360[ 3.079878] IR RC5(x/sz) protocol handler initialized
361[ 3.085004] IR RC6 protocol handler initialized
362[ 3.089607] IR JVC protocol handler initialized
363[ 3.094155] IR Sony protocol handler initialized
364[ 3.098843] IR SANYO protocol handler initialized
365[ 3.103565] IR Sharp protocol handler initialized
366[ 3.108339] IR MCE Keyboard/mouse protocol handler initialized
367[ 3.114246] IR XMP protocol handler initialized
368[ 3.120296] ov5645_mipi 1-003c: 1-003c supply DOVDD not found, using dummy regulator
369[ 3.128112] ov5645_mipi 1-003c: 1-003c supply DVDD not found, using dummy regulator
370[ 3.135879] ov5645_mipi 1-003c: 1-003c supply AVDD not found, using dummy regulator
371[ 3.214119] ov5645_read_reg:write reg error:reg=300a
372[ 3.219104] camera ov5645_mipi is not found
373[ 3.224782] mxc-mipi-csi2_yav 30a70000.mipi_csi1: mipi_csi2_probe
374[ 3.231005] CSI: Registered sensor subdevice: mxc-mipi-csi2.0
375[ 3.236843] mxc-mipi-csi2_yav 30a70000.mipi_csi: Remote device at /mipi_csi1@30a70000/port/endpoint1 XXX found
376[ 3.246879] mxc-mipi-csi2_yav 30a70000.mipi_csi1: lanes: 2, name: mxc-mipi-csi2.0
377[ 3.257332] gpio-fan gpio_fan: GPIO fan initialized
378[ 3.265280] imx2-wdt 30280000.wdog: timeout 60 sec (nowayout=0)
379[ 3.272230] Bluetooth: HCI UART driver ver 2.3
380[ 3.276699] Bluetooth: HCI UART protocol H4 registered
381[ 3.281911] Bluetooth: HCI UART protocol BCSP registered
382[ 3.287241] Bluetooth: HCI UART protocol ATH3K registered
383[ 3.292658] Bluetooth: HCI UART protocol Three-wire (H5) registered
384[ 3.299192] Bluetooth: HCI UART protocol Broadcom registered
385[ 3.304927] Bluetooth: HCI UART protocol QCA registered
386[ 3.311923] sdhci: Secure Digital Host Controller Interface driver
387[ 3.318128] sdhci: Copyright(c) Pierre Ossman
388[ 3.322777] Synopsys Designware Multimedia Card Interface Driver
389[ 3.330123] sdhci-pltfm: SDHCI platform and OF driver helper
390[ 3.385786] mmc0: SDHCI controller on 30b40000.usdhc [30b40000.usdhc] using ADMA
391[ 3.393990] sdhci-esdhc-imx 30b50000.usdhc: Got CD GPIO
392[ 3.451522] mmc1: SDHCI controller on 30b50000.usdhc [30b50000.usdhc] using ADMA
393[ 3.468302] update hantro voltage from 900 mV to 1000 mV
394[ 3.474137] hantrodec: module inserted. Major = 237
395[ 3.483560] ledtrig-cpu: registered to indicate activity on CPUs
396[ 3.491016] caam 30900000.caam: ERA source: CCBVID.
397[ 3.499204] caam 30900000.caam: device ID = 0x0a16040100000000 (Era 9)
398[ 3.505827] caam 30900000.caam: job rings = 3, qi = 0, dpaa2 = no
399[ 3.515487] caam_jr 30901000.jr0: Entropy delay = 3200
400[ 3.521392] caam_jr 30901000.jr0: Entropy delay = 3600
401[ 3.564167] mmc0: new HS400 MMC card at address 0001
402[ 3.569829] mmcblk0: mmc0:0001 8GTF4R 7.28 GiB
403[ 3.574749] mmcblk0boot0: mmc0:0001 8GTF4R partition 1 4.00 MiB
404[ 3.581046] mmcblk0boot1: mmc0:0001 8GTF4R partition 2 4.00 MiB
405[ 3.587341] mmcblk0rpmb: mmc0:0001 8GTF4R partition 3 512 KiB
406[ 3.594825] caam_jr 30901000.jr0: Instantiated RNG4 SH0.
407[ 3.605688] mmcblk0: p1 p2 p3
408[ 3.643794] mmc1: host does not support reading read-only switch, assuming write-enable
409[ 3.662476] caam_jr 30901000.jr0: Instantiated RNG4 SH1.
410[ 3.698460] caam algorithms registered in /proc/crypto
411[ 3.708934] caam_jr 30901000.jr0: registering rng-caam
412[ 3.714512] caam 30900000.caam: caam pkc algorithms registered in /proc/crypto
413[ 3.723404] platform caam_sm: blkkey_ex: 2 keystore units available
414[ 3.731053] caam-snvs 30370000.caam-snvs: can't get snvs clock
415[ 3.736957] caam-snvs 30370000.caam-snvs: violation handlers armed - non-secure state
416[ 3.744994] [drm] Cannot find any crtc or sizes
417[ 3.750216] usbcore: registered new interface driver usbhid
418[ 3.755810] usbhid: USB HID core driver
419[ 3.776958] rt5645: Raising HP charge pump threshold to prevent jack event mis-detects.
420[ 3.777799] mmc1: new ultra high speed DDR50 SDHC card at address e624
421[ 3.785100] rt5645 2-001a: 2-001a supply avdd not found, using dummy regulator
422[ 3.792220] mmcblk1: mmc1:e624 SU08G 7.40 GiB
423[ 3.798903] rt5645 2-001a: 2-001a supply cpvdd not found, using dummy regulator
424[ 3.811813] mmcblk1: p1 p2
425[ 3.840986] edgetpu-audio-card sound-rt5645: clock set to 24576000
426[ 3.857249] edgetpu-audio-card sound-rt5645: rt5645-aif1 <-> 308b0000.sai mapping ok
427[ 3.865189] edgetpu-audio-card sound-rt5645: ASoC: no DMI vendor name!
428[ 3.947149] input: edgetpu-audio-card Headphone Jack as /devices/platform/sound-rt5645/sound/card0/input1
429[ 3.958138] NET: Registered protocol family 26
430[ 3.963141] NET: Registered protocol family 10
431[ 3.969051] Segment Routing with IPv6
432[ 3.972774] NET: Registered protocol family 17
433[ 3.977245] can: controller area network core (rev 20170425 abi 9)
434[ 3.983534] NET: Registered protocol family 29
435[ 3.987998] can: raw protocol (rev 20170425)
436[ 3.992341] can: broadcast manager protocol (rev 20170425 t)
437[ 3.998023] can: netlink gateway (rev 20170425) max_hops=1
438[ 4.004421] Bluetooth: RFCOMM TTY layer initialized
439[ 4.009327] Bluetooth: RFCOMM socket layer initialized
440[ 4.014548] Bluetooth: RFCOMM ver 1.11
441[ 4.018321] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
442[ 4.023706] Bluetooth: BNEP filters: protocol multicast
443[ 4.028954] Bluetooth: BNEP socket layer initialized
444[ 4.033991] Bluetooth: HIDP (Human Interface Emulation) ver 1.2
445[ 4.039932] Bluetooth: HIDP socket layer initialized
446[ 4.045008] lib80211: common routines for IEEE802.11 drivers
447[ 4.050725] 9pnet: Installing 9P2000 support
448[ 4.055165] Key type dns_resolver registered
449[ 4.064386] registered taskstats version 1
450[ 4.075412] failed to disable 800MHz OPP!
451[ 4.079458] failed to disable 1.3GHz OPP!
452[ 4.088095] cpu cpu0: registered imx8mq-cpufreq
453[ 4.094417] imx6q-pcie 33800000.pcie: 33800000.pcie supply epdev_on not found, using dummy regulator
454[ 4.104248] OF: PCI: host bridge /pcie@0x33800000 ranges:
455[ 4.109685] OF: PCI: No bus range found for /pcie@0x33800000, using [bus 00-ff]
456[ 4.117314] OF: PCI: IO 0x1ff80000..0x1ff8ffff -> 0x00000000
457[ 4.123280] OF: PCI: MEM 0x18000000..0x1fefffff -> 0x18000000
458[ 4.132489] imx6q-pcie 33800000.pcie: pcie phy pll is locked.
459[ 4.191587] imx6q-pcie 33800000.pcie: Link: Gen2 disabled
460[ 4.196999] imx6q-pcie 33800000.pcie: Link up, Gen1
461[ 4.203980] imx6q-pcie 33800000.pcie: PCI host bridge to bus 0000:00
462[ 4.210369] pci_bus 0000:00: root bus resource [bus 00-ff]
463[ 4.215933] pci_bus 0000:00: root bus resource [io 0x0000-0xffff]
464[ 4.222136] pci_bus 0000:00: root bus resource [mem 0x18000000-0x1fefffff]
465[ 4.241882] pci 0000:00:00.0: BAR 14: assigned [mem 0x18000000-0x181fffff]
466[ 4.248896] pci 0000:00:00.0: BAR 0: assigned [mem 0x18200000-0x182fffff 64bit]
467[ 4.256237] pci 0000:00:00.0: BAR 6: assigned [mem 0x18300000-0x1830ffff pref]
468[ 4.263545] pci 0000:01:00.0: BAR 0: assigned [mem 0x18000000-0x181fffff 64bit]
469[ 4.270917] pci 0000:00:00.0: PCI bridge to [bus 01-ff]
470[ 4.276220] pci 0000:00:00.0: bridge window [mem 0x18000000-0x181fffff]
471[ 4.283040] pci 0000:00:00.0: Max Payload Size set to 128/ 128 (was 128), Max Read Rq 128
472[ 4.291614] pci 0000:01:00.0: Max Payload Size set to 128/ 256 (was 128), Max Read Rq 128
473[ 4.300557] pcieport 0000:00:00.0: Signaling PME with IRQ 234
474[ 4.306533] pcieport 0000:00:00.0: AER enabled with IRQ 234
475[ 4.313108] imx6q-pcie 33c00000.pcie: 33c00000.pcie supply epdev_on not found, using dummy regulator
476[ 4.322574] OF: PCI: host bridge /pcie@0x33c00000 ranges:
477[ 4.328056] OF: PCI: No bus range found for /pcie@0x33c00000, using [bus 00-ff]
478[ 4.335571] OF: PCI: IO 0x27f80000..0x27f8ffff -> 0x00000000
479[ 4.341572] OF: PCI: MEM 0x20000000..0x27efffff -> 0x20000000
480[ 4.350725] imx6q-pcie 33c00000.pcie: pcie phy pll is locked.
481[ 4.411870] imx6q-pcie 33c00000.pcie: Link up, Gen2
482[ 4.422402] imx6q-pcie 33c00000.pcie: PCI host bridge to bus 0001:00
483[ 4.428806] pci_bus 0001:00: root bus resource [bus 00-ff]
484[ 4.434332] pci_bus 0001:00: root bus resource [io 0x10000-0x1ffff] (bus address [0x0000-0xffff])
485[ 4.443379] pci_bus 0001:00: root bus resource [mem 0x20000000-0x27efffff]
486[ 4.461849] pci 0001:00:00.0: BAR 0: assigned [mem 0x20000000-0x200fffff 64bit]
487[ 4.469235] pci 0001:00:00.0: BAR 15: assigned [mem 0x20100000-0x202fffff pref]
488[ 4.476562] pci 0001:00:00.0: BAR 6: assigned [mem 0x20300000-0x2030ffff pref]
489[ 4.483856] pci 0001:01:00.0: BAR 2: assigned [mem 0x20100000-0x201fffff 64bit pref]
490[ 4.491645] pci 0001:01:00.0: BAR 0: assigned [mem 0x20200000-0x20203fff 64bit pref]
491[ 4.499488] pci 0001:00:00.0: PCI bridge to [bus 01-ff]
492[ 4.504729] pci 0001:00:00.0: bridge window [mem 0x20100000-0x202fffff pref]
493[ 4.512026] pci 0001:00:00.0: Max Payload Size set to 128/ 128 (was 128), Max Read Rq 128
494[ 4.520522] pci 0001:01:00.0: Max Payload Size set to 128/ 256 (was 128), Max Read Rq 128
495[ 4.529387] pcieport 0001:00:00.0: Signaling PME with IRQ 363
496[ 4.535282] pcieport 0001:00:00.0: AER enabled with IRQ 363
497[ 4.541254] apex 0001:01:00.0: enabling device (0000 -> 0002)
498[ 4.548521] Can't support > 32 bit dma.
499[ 4.552466] Can't support > 32 bit dma.
500[ 4.565830] snvs_rtc 30370000.snvs:snvs-rtc-lp: setting system clock to 1970-01-01 00:00:01 UTC (1)
501[ 4.575866] buck3: disabling
502[ 4.579657] ALSA device list:
503[ 4.582706] #0: edgetpu-audio-card
504[ 5.592854] EXT4-fs (mmcblk1p2): recovery complete
505[ 5.599389] EXT4-fs (mmcblk1p2): mounted filesystem with ordered data mode. Opts: (null)
506[ 5.607594] VFS: Mounted root (ext4 filesystem) on device 179:130.
507[ 5.614554] devtmpfs: mounted
508[ 5.618411] Freeing unused kernel memory: 1280K
509[ 6.080068] systemd[1]: System time before build time, advancing clock.
510[ 6.127890] ip_tables: (C) 2000-2006 Netfilter Core Team
511[ 6.152623] systemd[1]: systemd 241 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +)
512[ 6.174550] systemd[1]: Detected architecture arm64.
513[ 6.200138] systemd[1]: Set hostname to <green-tang>.
514[ 6.421095] systemd[1]: File /lib/systemd/system/systemd-journald.service:12 configures an IP firewall (IPAddressDeny=any), but the local system does not support BPF/cgroup ba.
515[ 6.438504] systemd[1]: Proceeding WITHOUT firewalling in effect! (This warning is only shown for the first loaded unit using IP firewalling.)
516[ 6.662392] systemd[1]: /lib/systemd/system/usb-gadget-getty-ttyGS0.service:21: Unknown lvalue 'TTYDisallocate' in section 'Service', ignoring
517[ 6.714453] random: systemd: uninitialized urandom read (16 bytes read)
518[ 6.726287] random: systemd: uninitialized urandom read (16 bytes read)
519[ 6.739351] systemd[1]: Created slice system-systemd\x2dfsck.slice.
520[ 6.746123] random: systemd: uninitialized urandom read (16 bytes read)
521[ 6.752773] systemd[1]: Reached target Swap.
522[ 6.757453] systemd[1]: Listening on fsck to fsckd communication Socket.
523[ 6.764487] systemd[1]: Listening on Journal Socket.
524[ 6.826339] EXT4-fs (mmcblk1p2): re-mounted. Opts: (null)
525[ 6.997673] systemd-journald[2044]: Received request to flush runtime journal from PID 1
526[ 7.324040] imx-sdma 30bd0000.sdma: no iram assigned, using external mem
527[ 7.353313] imx-sdma 302c0000.sdma: no iram assigned, using external mem
528[ 7.366931] imx-sdma 30bd0000.sdma: loaded firmware 4.2
529[ 7.368247] imx-sdma 302c0000.sdma: loaded firmware 4.2
530[ 7.376637] ina2xx 1-0040: error configuring the device: -6
531[ 7.394978] ina2xx 1-0041: error configuring the device: -6
532[ 7.449012] galcore: loading out-of-tree module taints kernel.
533[ 7.463069] galcore: clk_get 2d core clock failed, disable 2d/vg!
534[ 7.469717] Galcore version 6.2.4.163672
535[ 7.763434] wlan: loading driver v4.5.23.1
536[ 7.780196] hif_pci_probe:, con_mode= 0x0
537[ 7.785066] PCI device id is 003e :003e
538[ 7.790395] hif_pci 0000:01:00.0: BAR 0: assigned [mem 0x18000000-0x181fffff 64bit]
539[ 7.799763] hif_pci 0000:01:00.0: enabling device (0000 -> 0002)
540[ 7.813342]
541[ 7.813342] hif_pci_configure : num_desired MSI set to 1
542[ 8.273715] hif_pci_probe: ramdump base 0xffff800025000000 size 2095136
543[ 8.288531] NUM_DEV=1 FWMODE=0x2 FWSUBMODE=0x0 FWBR_BUF 0
544[ 8.735532] random: crng init done
545[ 8.738958] random: 7 urandom warning(s) missed due to ratelimiting
546[ 8.956131] +HWT
547[ 8.968017] -HWT
548[ 8.992109] HTT: full reorder offload enabled
549[ 9.020491] Pkt log is disabled
550[ 9.026457] target uses HTT version 3.50; host uses 3.28
551[ 9.027362] Host SW:4.5.23.1, FW:2.0.1.1048, HW:QCA6174_REV3_2
552[ 9.038878] ol_pktlog_init: pktlogmod_init successfull
553[ 9.045085] wlan: driver loaded in 1280000