· 6 years ago · Apr 19, 2019, 06:32 AM
1
2Format: Log Type - Time(microsec) - Message - Optional Info
3Log Type: B - Since Boot(Power On Reset), D - Delta, S - Statistic
4S - QC_IMAGE_VERSION_STRING=BOOT.BF.3.1.2-00059
5S - IMAGE_VARIANT_STRING=LAATANAZA
6S - OEM_IMAGE_VERSION_STRING=ubuntu-247
7S - Boot Config, 0x000000e0
8B - 1216 - PBL, Start
9B - 3723 - bootable_media_detect_entry, Start
10B - 4418 - bootable_media_detect_success, Start
11B - 4422 - elf_loader_entry, Start
12B - 7872 - auth_hash_seg_entry, Start
13B - 8093 - auth_hash_seg_exit, Start
14B - 56304 - elf_segs_hash_verify_entry, Start
15B - 101400 - PBL, End
16B - 93909 - SBL1, Start
17B - 143411 - pm_device_init, Start
18B - 161131 - PM_SET_VAL:Skip
19D - 16043 - pm_device_init, Delta
20B - 162138 - boot_config_data_table_init, Start
21D - 174917 - boot_config_data_table_init, Delta - (420 Bytes)
22B - 340593 - CDT version:3,Platform ID:8,Major ID:1,Minor ID:0,Subtype:0
23B - 347059 - sbl1_ddr_set_params, Start
24B - 350536 - cpr_init, Start
25D - 0 - cpr_init, Delta
26B - 356179 - Pre_DDR_clock_init, Start
27D - 244 - Pre_DDR_clock_init, Delta
28D - 0 - sbl1_ddr_set_params, Delta
29B - 368989 - pm_driver_init, Start
30D - 4605 - pm_driver_init, Delta
31B - 381707 - sbl1_qhsusb_al_do_fast_enum, Start
32B - 382012 - clock_init, Start
33D - 152 - clock_init, Delta
34B - 386008 - boot_flash_init, Start
35D - 37972 - boot_flash_init, Delta
36B - 478911 - Image Load, Start
37D - 60390 - QSEE Image Loaded, Delta - (487948 Bytes)
38B - 539362 - Image Load, Start
39D - 732 - SEC Image Loaded, Delta - (2048 Bytes)
40B - 547688 - sbl1_efs_handle_cookies, Start
41D - 0 - sbl1_efs_handle_cookies, Delta
42B - 554429 - Image Load, Start
43D - 31903 - RPM Image Loaded, Delta - (151348 Bytes)
44B - 586362 - Image Load, Start
45D - 27389 - APPSBL Image Loaded, Delta - (182652 Bytes)
46B - 613812 - QSEE Execution, Start
47D - 122 - QSEE Execution, Delta
48B - 619516 - SBL1, End
49D - 527894 - SBL1, Delta
50S - Throughput, 3000 KB/s (824416 Bytes, 273946 us)
51S - DDR Frequency, 240 MHz
52 Android Bootloader - UART_DM Initialized!!!
53[0] welcome to lk
54
55[0] SCM call: 0x2000601 failed with :fffffffc
56[0] Failed to initialize SCM
57[10] platform_init()
58[10] target_init()
59[10] smem ptable found: ver: 4 len: 24
60[10] ERROR: No devinfo partition found
61[10] Neither 'config' nor 'frp' partition found
62[20] FASTBOOT_KEY_GPIO_ID=37 ret=0
63[70] FASTBOOT_KEY_GPIO_ID=37 ret=1
64[70] buff0 is de
65[80] Loading (boot) image (5980160): start
66[670] Loading (boot) image (5980160): done
67[670] DTB Total entry: 25, DTB version: 3
68[680] Using DTB entry 0x00000129/00010000/0x00000008/0 for device 0x00000129/00010000/0x00010008/0
69[690] cmdline: noinitrd rw console=ttyHSL0,115200,n8 androidboot.hardware=qcom ehci-hcd.park=3 msm_rtb.filter=0x37 lpm_levels.sleep_disabled=1 earlycon=msm_hsl_uart,0x78b3000 androidboot.serialno=124346 androidboot.baseband=msm rootfstype=ubifs rootflags=bul[720] Updating device tree: start
70[840] Updating device tree: done
71[840] booting linux @ 0x80008000, ramdisk @ 0x80008000 (0), tags/device tree @ 0x81e00000
72
73Format: Log Type - Time(microsec) - Message - Optional Info
74Log Type: B - Since Boot(Power On Reset), D - Delta, S - Statistic
75S - QC_IMAGE_VERSION_STRING=BOOT.BF.3.1.2-00059
76S - IMAGE_VARIANT_STRING=LAATANAZA
77S - OEM_IMAGE_VERSION_STRING=ubuntu-247
78S - Boot Config, 0x000000e0
79B - 1216 - PBL, Start
80B - 3723 - bootable_media_detect_entry, Start
81B - 4413 - bootable_media_detect_success, Start
82B - 4417 - elf_loader_entry, Start
83B - 7870 - auth_hash_seg_entry, Start
84B - 8092 - auth_hash_seg_exit, Start
85B - 56338 - elf_segs_hash_verify_entry, Start
86B - 101435 - PBL, End
87B - 93970 - SBL1, Start
88B - 143502 - pm_device_init, Start
89B - 161223 - PM_SET_VAL:Skip
90D - 16073 - pm_device_init, Delta
91B - 162229 - boot_config_data_table_init, Start
92D - 174917 - boot_config_data_table_init, Delta - (420 Bytes)
93B - 340685 - CDT version:3,Platform ID:8,Major ID:1,Minor ID:0,Subtype:0
94B - 347151 - sbl1_ddr_set_params, Start
95B - 350628 - cpr_init, Start
96D - 0 - cpr_init, Delta
97B - 356270 - Pre_DDR_clock_init, Start
98D - 244 - Pre_DDR_clock_init, Delta
99D - 0 - sbl1_ddr_set_params, Delta
100B - 369050 - pm_driver_init, Start
101D - 4605 - pm_driver_init, Delta
102B - 381799 - sbl1_qhsusb_al_do_fast_enum, Start
103B - 382104 - clock_init, Start
104D - 152 - clock_init, Delta
105B - 386099 - boot_flash_init, Start
106D - 37972 - boot_flash_init, Delta
107B - 479002 - Image Load, Start
108D - 60390 - QSEE Image Loaded, Delta - (487948 Bytes)
109B - 539453 - Image Load, Start
110D - 732 - SEC Image Loaded, Delta - (2048 Bytes)
111B - 547780 - sbl1_efs_handle_cookies, Start
112D - 0 - sbl1_efs_handle_cookies, Delta
113B - 554520 - Image Load, Start
114D - 31903 - RPM Image Loaded, Delta - (151348 Bytes)
115B - 586454 - Image Load, Start
116D - 27389 - APPSBL Image Loaded, Delta - (182652 Bytes)
117B - 613904 - QSEE Execution, Start
118D - 152 - QSEE Execution, Delta
119B - 619607 - SBL1, End
120D - 527894 - SBL1, Delta
121S - Throughput, 3000 KB/s (824416 Bytes, 274101 us)
122S - DDR Frequency, 240 MHz
123 Android Bootloader - UART_DM Initialized!!!
124[0] welcome to lk
125
126[0] SCM call: 0x2000601 failed with :fffffffc
127[0] Failed to initialize SCM
128[10] platform_init()
129[10] target_init()
130[10] smem ptable found: ver: 4 len: 24
131[10] ERROR: No devinfo partition found
132[10] Neither 'config' nor 'frp' partition found
133[20] FASTBOOT_KEY_GPIO_ID=37 ret=0
134[70] FASTBOOT_KEY_GPIO_ID=37 ret=1
135[70] buff0 is de
136[80] Loading (boot) image (5980160): start
137[670] Loading (boot) image (5980160): done
138[670] DTB Total entry: 25, DTB version: 3
139[680] Using DTB entry 0x00000129/00010000/0x00000008/0 for device 0x00000129/00010000/0x00010008/0
140[690] cmdline: noinitrd rw console=ttyHSL0,115200,n8 androidboot.hardware=qcom ehci-hcd.park=3 msm_rtb.filter=0x37 lpm_levels.sleep_disabled=1 earlycon=msm_hsl_uart,0x78b3000 androidboot.serialno=124346 androidboot.baseband=msm rootfstype=ubifs rootflags=bul[720] Updating device tree: start
141[840] Updating device tree: done
142[840] booting linux @ 0x80008000, ramdisk @ 0x80008000 (0), tags/device tree @ 0x81e00000
143[ 0.000000] Booting Linux on physical CPU 0x0
144[ 0.000000] Initializing cgroup subsys cpu
145[ 0.000000] Initializing cgroup subsys cpuacct
146[ 0.000000] Linux version 3.18.20 (xiaoqinqin@ubuntu-241) (gcc version 4.9.2 (GCC) ) #1 PREEMPT Thu Aug 16 17:16:19 CST 2018
147[ 0.000000] CPU: ARMv7 Processor [410fc075] revision 5 (ARMv7), cr=10c53c7d
148[ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
149[ 0.000000] Machine model: Qualcomm Technologies, Inc. MDM 9607 MTP
150[ 0.000000] Early serial console at I/O port 0x0 (options '')
151[ 0.000000] bootconsole [uart0] enabled
152[ 0.000000] Reserved memory: reserved region for node 'modem_adsp_region@0': base 0x82a00000, size 81 MiB
153[ 0.000000] Reserved memory: reserved region for node 'cnss_debug_region@0': base 0x87b00000, size 1 MiB
154[ 0.000000] Reserved memory: reserved region for node 'external_image_region@0': base 0x87c00000, size 4 MiB
155[ 0.000000] Removed memory: created DMA memory pool at 0x82a00000, size 81 MiB
156[ 0.000000] Reserved memory: initialized node modem_adsp_region@0, compatible id removed-dma-pool
157[ 0.000000] Removed memory: created DMA memory pool at 0x87b00000, size 1 MiB
158[ 0.000000] Reserved memory: initialized node cnss_debug_region@0, compatible id removed-dma-pool
159[ 0.000000] Removed memory: created DMA memory pool at 0x87c00000, size 4 MiB
160[ 0.000000] Reserved memory: initialized node external_image_region@0, compatible id removed-dma-pool
161[ 0.000000] Reserved memory: allocated memory for 'audio_region@0' node: base 0x8fc00000, size 4 MiB
162[ 0.000000] Reserved memory: created CMA memory pool at 0x8fc00000, size 4 MiB
163[ 0.000000] Reserved memory: initialized node audio_region@0, compatible id shared-dma-pool
164[ 0.000000] cma: Reserved 4 MiB at 0x8f800000
165[ 0.000000] Memory policy: Data cache writeback
166[ 0.000000] CPU: All CPU(s) started in SVC mode.
167[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 63616
168[ 0.000000] Kernel command line: noinitrd rw console=ttyHSL0,115200,n8 androidboot.hardware=qcom ehci-hcd.park=3 msm_rtb.filter=0x37 lpm_levels.sleep_disabled=1 earlycon=msm_hsl_uart,0x78b3000 androidboot.serialno=124346 androidboot.baseband=msm rootfstype=ubifs rootflags=bulk_read root=ubi0:rootfs ubi.mtd=23
169[ 0.000000] PID hash table entries: 1024 (order: 0, 4096 bytes)
170[ 0.000000] Dentry cache hash table entries: 32768 (order: 5, 131072 bytes)
171[ 0.000000] Inode-cache hash table entries: 16384 (order: 4, 65536 bytes)
172[ 0.000000] Memory: 148036K/257024K available (8204K kernel code, 1096K rwdata, 3668K rodata, 348K init, 1156K bss, 108988K reserved)
173[ 0.000000] Virtual kernel memory layout:
174[ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB)
175[ 0.000000] fixmap : 0xffc00000 - 0xfff00000 (3072 kB)
176[ 0.000000] vmalloc : 0xd0800000 - 0xff000000 ( 744 MB)
177[ 0.000000] lowmem : 0xc0000000 - 0xd0000000 ( 256 MB)
178[ 0.000000] modules : 0xbf000000 - 0xc0000000 ( 16 MB)
179[ 0.000000] .text : 0xc0008000 - 0xc0ba025c (11873 kB)
180[ 0.000000] .init : 0xc0ba1000 - 0xc0bf8000 ( 348 kB)
181[ 0.000000] .data : 0xc0bf8000 - 0xc0d0a240 (1097 kB)
182[ 0.000000] .bss : 0xc0d0a304 - 0xc0e2b4f0 (1157 kB)
183[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
184[ 0.000000] Preemptible hierarchical RCU implementation.
185[ 0.000000] NR_IRQS:16 nr_irqs:16 16
186[ 0.000000] kmemleak: Kernel memory leak detector disabled
187[ 0.000000] GIC CPU mask not found - kernel will fail to boot.
188[ 0.000000] GIC CPU mask not found - kernel will fail to boot.
189[ 0.000000] mpm_init_irq_domain(): Cannot find irq controller for qcom,gpio-parent
190[ 0.000000] MPM 1 irq mapping errored -517
191[ 0.000000] Architected mmio timer(s) running at 19.20MHz (virt).
192[ 0.000010] sched_clock: 56 bits at 19MHz, resolution 52ns, wraps every 3579139424256ns
193[ 0.007972] Switching to timer-based delay loop, resolution 52ns
194[ 0.013966] Switched to clocksource arch_mem_counter
195[ 0.019795] Console: colour dummy device 80x30
196[ 0.023345] Calibrating delay loop (skipped), value calculated using timer frequency.. 38.40 BogoMIPS (lpj=192000)
197[ 0.033663] pid_max: default: 32768 minimum: 301
198[ 0.038526] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)
199[ 0.044918] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes)
200[ 0.052832] Initializing cgroup subsys freezer
201[ 0.056402] Initializing cgroup subsys debug
202[ 0.060609] CPU: Testing write buffer coherency: ok
203[ 0.065951] Setting up static identity map for 0x807d0a30 - 0x807d0a88
204[ 0.073371]
205[ 0.073371] **********************************************************
206[ 0.080442] ** NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE **
207[ 0.086885] ** **
208[ 0.093361] ** trace_printk() being used. Allocating extra memory. **
209[ 0.099901] ** **
210[ 0.106409] ** This means that this is a DEBUG kernel and it is **
211[ 0.112892] ** unsafe for produciton use. **
212[ 0.119431] ** **
213[ 0.125940] ** If you see this message and you are not debugging **
214[ 0.132423] ** the kernel, report this immediately to your vendor! **
215[ 0.138961] ** **
216[ 0.145471] ** NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE **
217[ 0.151954] **********************************************************
218[ 0.187600] MSM Memory Dump base table set up
219[ 0.190993] MSM Memory Dump apps data table set up
220[ 0.208210] VFP support v0.3: implementor 41 architecture 2 part 30 variant 7 rev 5
221[ 0.222244] pinctrl core: initialized pinctrl subsystem
222[ 0.227263] regulator-dummy: no parameters
223[ 0.278998] NET: Registered protocol family 16
224[ 0.294728] DMA: preallocated 256 KiB pool for atomic coherent allocations
225[ 0.354037] cpuidle: using governor ladder
226[ 0.384029] cpuidle: using governor menu
227[ 0.414027] cpuidle: using governor qcom
228[ 0.429144] msm_watchdog b017000.qcom,wdt: wdog absent resource not present
229[ 0.435544] msm_watchdog b017000.qcom,wdt: MSM Watchdog Initialized
230[ 0.454104] spmi_pmic_arb 200f000.qcom,spmi: PMIC Arb Version-2 0x20010000
231[ 0.463547] platform 4080000.qcom,mss: assigned reserved memory node modem_adsp_region@0
232[ 0.471432] mem_acc_corner: 0 <--> 0 mV
233[ 0.476295] hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers.
234[ 0.483261] hw-breakpoint: maximum watchpoint size is 8 bytes.
235[ 0.491187] __of_mpm_init(): MPM driver mapping exists
236[ 0.496045] msm_rpm_glink_dt_parse: qcom,rpm-glink compatible not matches
237[ 0.502061] msm_rpm_dev_probe: APSS-RPM communication over SMD
238[ 0.507935] smd_open() before smd_init()
239[ 0.512573] msm_mpm_dev_probe(): Cannot get clk resource for XO: -517
240[ 0.521280] smd_channel_probe_now: allocation table not initialized
241[ 0.529823] mdm9607_s1: 1050 <--> 1350 mV at 1225 mV normal idle
242[ 0.535428] spm_regulator_probe: name=mdm9607_s1, range=LV, voltage=1225000 uV, mode=AUTO, step rate=4800 uV/us
243[ 0.545668] cpr_efuse_init: apc_corner: efuse_addr = 0x000a4000 (len=0x1000)
244[ 0.552043] cpr_read_fuse_revision: apc_corner: fuse revision = 2
245[ 0.558130] cpr_parse_speed_bin_fuse: apc_corner: [row: 37]: 0x27804832d6fa53c4, speed_bits = 4
246[ 0.566855] cpr_pvs_init: apc_corner: pvs voltage: [1050000 1100000 1237500] uV
247[ 0.574068] cpr_pvs_init: apc_corner: ceiling voltage: [1050000 1225000 1350000] uV
248[ 0.581673] cpr_pvs_init: apc_corner: floor voltage: [1050000 1050000 1150000] uV
249[ 0.590082] i2c-msm-v2 78b6000.i2c: probing driver i2c-msm-v2
250[ 0.595076] i2c-msm-v2 78b6000.i2c: error on clk_get(core_clk):-517
251[ 0.601123] i2c-msm-v2 78b6000.i2c: error probe() failed with err:-517
252[ 0.608026] i2c-msm-v2 78b8000.i2c: probing driver i2c-msm-v2
253[ 0.613411] i2c-msm-v2 78b8000.i2c: error on clk_get(core_clk):-517
254[ 0.619737] i2c-msm-v2 78b8000.i2c: error probe() failed with err:-517
255[ 0.629193] msm-thermal soc:qcom,msm-thermal: msm_thermal:Failed reading node=/soc/qcom,msm-thermal, key=qcom,core-limit-temp. err=-22. KTM continues
256[ 0.641634] msm-thermal soc:qcom,msm-thermal: probe_therm_reset:Failed reading node=/soc/qcom,msm-thermal, key=qcom,therm-reset-temp err=-22. KTM continues
257[ 0.655474] msm_thermal:get_kernel_cluster_info CPU0 topology not initialized.
258[ 0.662697] msm_thermal:vdd_restriction_reg_init Defer regulator vdd-dig probe
259[ 0.669880] msm_thermal:probe_vdd_rstr Err regulator init. err:-517. KTM continues.
260[ 0.677525] msm-thermal soc:qcom,msm-thermal: probe_vdd_rstr:Failed reading node=/soc/qcom,msm-thermal, key=qcom,max-freq-level. err=-517. KTM continues
261[ 0.691142] msm_thermal:msm_thermal_dev_probe Failed reading node=/soc/qcom,msm-thermal, key=qcom,online-hotplug-core. err:-517
262[ 0.704666] sps:sps is ready.
263[ 0.709151] msm_rpm_glink_dt_parse: qcom,rpm-glink compatible not matches
264[ 0.715041] msm_rpm_dev_probe: APSS-RPM communication over SMD
265[ 0.722065] mdm9607_s2: 750 <--> 1275 mV at 750 mV normal idle
266[ 0.728346] mdm9607_s3_level: 0 <--> 0 mV at 0 mV normal idle
267[ 0.733906] mdm9607_s3_level_ao: 0 <--> 0 mV at 0 mV normal idle
268[ 0.740143] mdm9607_s3_floor_level: 0 <--> 0 mV at 0 mV normal idle
269[ 0.746382] mdm9607_s3_level_so: 0 <--> 0 mV at 0 mV normal idle
270[ 0.752649] mdm9607_s4: 1800 <--> 1950 mV at 1800 mV normal idle
271[ 0.758790] mdm9607_l1: 1250 mV normal idle
272[ 0.763034] mdm9607_l2: 1800 mV normal idle
273[ 0.767367] mdm9607_l3: 1800 mV normal idle
274[ 0.771652] mdm9607_l4: 3075 mV normal idle
275[ 0.775963] mdm9607_l5: 1700 <--> 3050 mV at 1700 mV normal idle
276[ 0.782079] mdm9607_l6: 1700 <--> 3050 mV at 1700 mV normal idle
277[ 0.788227] mdm9607_l7: 1700 <--> 1900 mV at 1700 mV normal idle
278[ 0.794416] mdm9607_l8: 1800 mV normal idle
279[ 0.798650] mdm9607_l9: 1200 <--> 1250 mV at 1200 mV normal idle
280[ 0.804829] mdm9607_l10: 1050 mV normal idle
281[ 0.809213] mdm9607_l11: 1800 mV normal idle
282[ 0.813601] mdm9607_l12_level: 0 <--> 0 mV at 0 mV normal idle
283[ 0.819372] mdm9607_l12_level_ao: 0 <--> 0 mV at 0 mV normal idle
284[ 0.825447] mdm9607_l12_level_so: 0 <--> 0 mV at 0 mV normal idle
285[ 0.831869] mdm9607_l13: 1800 <--> 2850 mV at 2850 mV normal idle
286[ 0.838155] mdm9607_l14: 2650 <--> 3000 mV at 2650 mV normal idle
287[ 0.843669] msm_mpm_dev_probe(): Cannot get clk resource for XO: -517
288[ 0.850155] cpr_efuse_init: apc_corner: efuse_addr = 0x000a4000 (len=0x1000)
289[ 0.856841] cpr_read_fuse_revision: apc_corner: fuse revision = 2
290[ 0.862836] cpr_parse_speed_bin_fuse: apc_corner: [row: 37]: 0x27804832d6fa53c4, speed_bits = 4
291[ 0.871626] cpr_pvs_init: apc_corner: pvs voltage: [1050000 1100000 1237500] uV
292[ 0.878835] cpr_pvs_init: apc_corner: ceiling voltage: [1050000 1225000 1350000] uV
293[ 0.886470] cpr_pvs_init: apc_corner: floor voltage: [1050000 1050000 1150000] uV
294[ 0.894206] cpr_init_cpr_parameters: apc_corner: up threshold = 2, down threshold = 3
295[ 0.901735] cpr_init_cpr_parameters: apc_corner: CPR is enabled by default.
296[ 0.908726] cpr_init_cpr_efuse: apc_corner: [row:65] = 0x158002a02a0383
297[ 0.915302] cpr_init_cpr_efuse: apc_corner: CPR disable fuse = 0
298[ 0.921252] cpr_init_cpr_efuse: apc_corner: Corner[1]: ro_sel = 0, target quot = 672
299[ 0.929006] cpr_init_cpr_efuse: apc_corner: Corner[2]: ro_sel = 0, target quot = 672
300[ 0.936731] cpr_init_cpr_efuse: apc_corner: Corner[3]: ro_sel = 0, target quot = 899
301[ 0.944678] cpr_config: apc_corner: Timer count: 0x17700 (for 5000 us)
302[ 0.951599] apc_corner: 0 <--> 0 mV
303[ 0.955247] i2c-msm-v2 78b6000.i2c: probing driver i2c-msm-v2
304[ 0.960303] i2c-msm-v2 78b6000.i2c: error on clk_get(core_clk):-517
305[ 0.966543] i2c-msm-v2 78b6000.i2c: error probe() failed with err:-517
306[ 0.973371] i2c-msm-v2 78b8000.i2c: probing driver i2c-msm-v2
307[ 0.978830] i2c-msm-v2 78b8000.i2c: error on clk_get(core_clk):-517
308[ 0.985007] i2c-msm-v2 78b8000.i2c: error probe() failed with err:-517
309[ 0.992017] msm-thermal soc:qcom,msm-thermal: msm_thermal:Failed reading node=/soc/qcom,msm-thermal, key=qcom,core-limit-temp. err=-22. KTM continues
310[ 1.004914] msm-thermal soc:qcom,msm-thermal: probe_therm_reset:Failed reading node=/soc/qcom,msm-thermal, key=qcom,therm-reset-temp err=-22. KTM continues
311[ 1.018779] msm_thermal:get_kernel_cluster_info CPU0 topology not initialized.
312[ 1.026531] cpu cpu0: dev_pm_opp_get_opp_count: device OPP not found (-19)
313[ 1.032796] msm_thermal:get_cpu_freq_plan_len Error reading CPU0 freq table len. error:-19
314[ 1.041083] msm_thermal:vdd_restriction_reg_init Defer vdd rstr freq init.
315[ 1.048357] cpu cpu0: dev_pm_opp_get_opp_count: device OPP not found (-19)
316[ 1.055743] msm_thermal:get_cpu_freq_plan_len Error reading CPU0 freq table len. error:-19
317[ 1.063219] cpu cpu0: dev_pm_opp_get_opp_count: device OPP not found (-19)
318[ 1.070706] msm_thermal:get_cpu_freq_plan_len Error reading CPU0 freq table len. error:-19
319[ 1.090154] qcom,gcc-mdm9607 1800000.qcom,gcc: Registered GCC clocks
320[ 1.096008] clock-a7 b010008.qcom,clock-a7: Speed bin: 4 PVS Version: 0
321[ 1.102154] a7ssmux: set OPP pair(400000000 Hz: 1 uV) on cpu0
322[ 1.107903] a7ssmux: set OPP pair(1305600000 Hz: 7 uV) on cpu0
323[ 1.115604] i2c-msm-v2 78b6000.i2c: probing driver i2c-msm-v2
324[ 1.120405] AXI: msm_bus_scale_register_client(): msm_bus_scale_register_client: Bus driver not ready.
325[ 1.129768] i2c-msm-v2 78b6000.i2c: msm_bus_scale_register_client(mstr-id:86):0 (not a problem)
326[ 1.139853] kworker/u2:2 (23) used greatest stack depth: 6940 bytes left
327[ 1.146058] kworker/u2:2 (24) used greatest stack depth: 6900 bytes left
328[ 1.153197] i2c-msm-v2 78b8000.i2c: probing driver i2c-msm-v2
329[ 1.158278] AXI: msm_bus_scale_register_client(): msm_bus_scale_register_client: Bus driver not ready.
330[ 1.167217] i2c-msm-v2 78b8000.i2c: msm_bus_scale_register_client(mstr-id:86):0 (not a problem)
331[ 1.249334] KPI: Bootloader start count = 22813
332[ 1.252828] KPI: Bootloader end count = 51032
333[ 1.257331] KPI: Bootloader display count = 564204865
334[ 1.262203] KPI: Bootloader load kernel count = 19413
335[ 1.267282] KPI: Kernel MPM timestamp = 120230
336[ 1.271664] KPI: Kernel MPM Clock frequency = 32768
337[ 1.276592] socinfo_print: v0.10, id=297, ver=1.0, raw_id=72, raw_ver=0, hw_plat=8, hw_plat_ver=65536
338[ 1.276592] accessory_chip=0, hw_plat_subtype=0, pmic_model=65539, pmic_die_revision=131074 foundry_id=1 serial_number=3606729668
339[ 1.298287] sdcard_ext_vreg: no parameters
340[ 1.302094] rome_vreg: no parameters
341[ 1.305699] emac_lan_vreg: no parameters
342[ 1.310645] SCSI subsystem initialized
343[ 1.313630] usbcore: registered new interface driver usbfs
344[ 1.319046] usbcore: registered new interface driver hub
345[ 1.324709] usbcore: registered new device driver usb
346[ 1.330468] cpufreq: driver msm up and running
347[ 1.334560] platform soc:qcom,ion:qcom,ion-heap@28: assigned reserved memory node audio_region@0
348[ 1.343036] ION heap system created
349[ 1.346400] ION heap audio created at 0x8fc00000 with size 400000
350[ 1.352602] msm_bus_fabric_init_driver
351[ 1.365906] qcom,qpnp-power-on qpnp-power-on-cf31fe00: PMIC@SID0 Power-on reason: Triggered from CBL (external power supply) and 'cold' boot
352[ 1.377552] qcom,qpnp-power-on qpnp-power-on-cf31fe00: PMIC@SID0: Unknown power-off reason
353[ 1.386059] input: qpnp_pon as /devices/virtual/input/input0
354[ 1.391880] PMIC@SID0: PM8019 v2.2 options: 3, 2, 2, 2
355[ 1.397852] Advanced Linux Sound Architecture Driver Initialized.
356[ 1.403734] Bluetooth: Core ver 2.19
357[ 1.406657] NET: Registered protocol family 31
358[ 1.410893] Bluetooth: HCI device and connection manager initialized
359[ 1.417282] Bluetooth: HCI socket layer initialized
360[ 1.422097] Bluetooth: L2CAP socket layer initialized
361[ 1.427191] Bluetooth: SCO socket layer initialized
362[ 1.432311] cfg80211: Calling CRDA to update world regulatory domain
363[ 1.439252] Switched to clocksource arch_mem_counter
364[ 1.444129] cfg80211: World regulatory domain updated:
365[ 1.448394] cfg80211: DFS Master region: unset
366[ 1.452734] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
367[ 1.484107] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
368[ 1.491076] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
369[ 1.511381] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A, 2000 mBm), (N/A)
370[ 1.518867] aw9523b_chip1_probe start
371[ 1.524046] cfg80211: (5170000 KHz - 5250000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A)
372[ 1.531007] cfg80211: (5250000 KHz - 5330000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A)
373[ 1.554008] cfg80211: (5490000 KHz - 5710000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A)
374[ 1.560968] cfg80211: (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A)
375[ 1.584008] cfg80211: (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm), (N/A)
376[ 1.629625] i2c-msm-v2 78b6000.i2c: msm_bus_scale_register_client(mstr-id:86):0x1 (ok)
377[ 1.657577] aw9523b_chip1-CONFIG_PORT0_DIRECT return 0
378[ 1.662147] aw9523b_chip1-CONFIG_PORT1_DIRECT return 8
379[ 1.667387] aw9523b_chip1-MODE_SWITCH_PORT0 return ff
380[ 1.672466] aw9523b_chip1-MODE_SWITCH_PORT1 return ff
381[ 1.677626] aw9523b_chip1-INT_PORT0 return ff
382[ 1.682015] aw9523b_chip1-INT_PORT1 return f7
383[ 1.686479] aw9523b_chip1-openExDevicePower: get_dev_id 23
384[ 1.707953] input: ble_int as /devices/virtual/input/input1
385[ 1.713250] aw9523b_chip1_probe end, power_gpio(14), interruptGpio(26), gpioIrq(321), chip_client_name(aw9523b_chip1)
386[ 1.728777] NET: Registered protocol family 2
387[ 1.732796] TCP established hash table entries: 2048 (order: 1, 8192 bytes)
388[ 1.739223] TCP bind hash table entries: 2048 (order: 3, 40960 bytes)
389[ 1.745548] TCP: Hash tables configured (established 2048 bind 2048)
390[ 1.751891] TCP: reno registered
391[ 1.755091] UDP hash table entries: 256 (order: 1, 12288 bytes)
392[ 1.760952] UDP-Lite hash table entries: 256 (order: 1, 12288 bytes)
393[ 1.767514] NET: Registered protocol family 1
394[ 1.773886] futex hash table entries: 256 (order: 0, 7168 bytes)
395[ 1.790183] msgmni has been set to 305
396[ 1.794805] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 250)
397[ 1.801204] io scheduler noop registered
398[ 1.805274] io scheduler deadline registered
399[ 1.809573] io scheduler cfq registered (default)
400[ 1.822030] msm_rpm_log_probe: OK
401[ 1.826411] enter tpl5010_probe
402[ 1.828805] input: tpl5010 as /devices/virtual/input/input2
403[ 1.874048] leave tpl5010_probe
404[ 1.877615] msm_serial_hs module loaded
405[ 1.880883] msm_serial_hsl_probe: detected port #0 (ttyHSL0)
406[ 1.886266] AXI: get_pdata(): Error: Client name not found
407[ 1.891558] AXI: msm_bus_cl_get_pdata(): client has to provide missing entry for successful registration
408[ 1.901063] msm_serial_hsl_probe: Bus scaling is disabled
409[ 1.906587] 78b3000.serial: ttyHSL0 at MMIO 0x78b3000 (irq = 153, base_baud = 460800)[ 1.915089] msm_hsl_console_setup: console setup on port #0
410[ 1.919703] console [ttyHSL0] enabled
411[ 1.919703] console [ttyHSL0] enabled
412[ 1.926983] bootconsole [uart0] disabled
413[ 1.926983] bootconsole [uart0] disabled
414[ 1.935245] msm_serial_hsl_probe: detected port #1 (ttyHSL1)
415[ 1.940409] AXI: get_pdata(): Error: Client name not found
416[ 1.945909] AXI: msm_bus_cl_get_pdata(): client has to provide missing entry for successful registration
417[ 1.955516] msm_serial_hsl_probe: Bus scaling is disabled
418[ 1.960847] 78af000.serial: ttyHSL1 at MMIO 0x78af000 (irq = 139, base_baud = 460800) is a MSM
419[ 1.969855] aw9523b_read_byte succeed, data(0x67), gpioval(1), rdcnt(4), delta_sec(1)s, delta_usec(1955880)us
420[ 1.979713] msm_serial_hsl_probe: detected port #2 (ttyHSL2)
421[ 1.984918] AXI: get_pdata(): Error: Client name not found
422[ 1.990296] AXI: msm_bus_cl_get_pdata(): client has to provide missing entry for successful registration
423[ 1.999810] There are invalid ble interrupt, abort it
424[ 2.004849] msm_serial_hsl_probe: Bus scaling is disabled
425[ 2.010307] 78b1000.serial: ttyHSL2 at MMIO 0x78b1000 (irq = 151, base_baud = 460800) is a MSM
426[ 2.019307] msm_serial_hsl_probe: detected port #3 (ttyHSL3)
427[ 2.024484] AXI: get_pdata(): Error: Client name not found
428[ 2.029882] AXI: msm_bus_cl_get_pdata(): client has to provide missing entry for successful registration
429[ 2.039377] msm_serial_hsl_probe: Bus scaling is disabled
430[ 2.044881] 78b2000.serial: ttyHSL3 at MMIO 0x78b2000 (irq = 152, base_baud = 460800) is a MSM
431[ 2.053852] msm_serial_hsl_init: driver initialized
432[ 2.071957] wakeup_report_probe
433[ 2.074228] rc:0
434[ 2.076161] Error: Driver 'wakeup_report' is already registered, aborting...
435[ 2.083230] wakeup_out_probe
436[ 2.086258] [yll]-get wakeup_out gpio = 6
437[ 2.090007] Error: Driver 'wakeup_out' is already registered, aborting...
438[ 2.103849] brd: module loaded
439[ 2.109642] loop: module loaded
440[ 2.113711] i2c-core: driver [tabla-i2c-core] using legacy suspend method
441[ 2.119536] i2c-core: driver [tabla-i2c-core] using legacy resume method
442[ 2.126322] i2c-core: driver [wcd9xxx-i2c-core] using legacy suspend method
443[ 2.133085] i2c-core: driver [wcd9xxx-i2c-core] using legacy resume method
444[ 2.140130] i2c-core: driver [tasha-i2c-core] using legacy suspend method
445[ 2.146752] i2c-core: driver [tasha-i2c-core] using legacy resume method
446[ 2.153627] SCSI Media Changer driver v0.25
447[ 2.162280] sps: BAM device 0x07984000 is not registered yet.
448[ 2.167680] sps:BAM 0x07984000 is registered.
449[ 2.171169] msm_nand_bam_init: msm_nand_bam_init: BAM device registered: bam_handle 0xceae8c00
450[ 2.180301] sps:BAM 0x07984000 (va:0xd09a0000) enabled: ver:0x18, number of pipes:7
451[ 2.190165] msm_nand_parse_smem_ptable: Parsing partition table info from SMEM
452[ 2.196472] msm_nand_parse_smem_ptable: SMEM partition table found: ver: 4 len: 24
453[ 2.203942] msm_nand_version_check: nand_major:1, nand_minor:5, qpic_major:1, qpic_minor:5
454[ 2.212243] msm_nand_scan: NAND Id: 0x2690ac98 Buswidth: 8Bits Density: 512 MByte
455[ 2.219794] msm_nand_scan: pagesize: 4096 Erasesize: 262144 oobsize: 128 (in Bytes)
456[ 2.227293] msm_nand_scan: BCH ECC: 8 Bit
457[ 2.231255] msm_nand_scan: CFG0: 0x290409c0, CFG1: 0x08045d5c
458[ 2.231255] RAWCFG0: 0x2b8401c0, RAWCFG1: 0x0005055d
459[ 2.231255] ECCBUFCFG: 0x00000203, ECCBCHCFG: 0x42040d10
460[ 2.231255] RAWECCCFG: 0x42000d11, BAD BLOCK BYTE: 0x00000175
461[ 2.257684] Creating 24 MTD partitions on "7980000.nand":
462[ 2.263020] 0x000000000000-0x000000280000 : "sbl"
463[ 2.268727] 0x000000280000-0x000000500000 : "mibib"
464[ 2.273456] 0x000000500000-0x000001100000 : "efs2"
465[ 2.278287] 0x000001100000-0x000001380000 : "backup_efs"
466[ 2.283504] 0x000001380000-0x0000014c0000 : "tz"
467[ 2.288243] 0x0000014c0000-0x0000015c0000 : "rpm"
468[ 2.292811] 0x0000015c0000-0x0000016c0000 : "aboot"
469[ 2.297780] 0x0000016c0000-0x000001ec0000 : "boot"
470[ 2.302407] 0x000001ec0000-0x000001f80000 : "scrub"
471[ 2.307337] 0x000001f80000-0x000006500000 : "modem"
472[ 2.312132] 0x000006500000-0x000006680000 : "misc"
473[ 2.316982] 0x000006680000-0x000006e80000 : "recovery"
474[ 2.322054] 0x000006e80000-0x000007000000 : "cache"
475[ 2.326981] 0x000007000000-0x000008700000 : "recoveryfs"
476[ 2.332227] 0x000008700000-0x000008780000 : "sec"
477[ 2.337218] 0x000008780000-0x000008880000 : "aboot_bak"
478[ 2.342237] 0x000008880000-0x000009080000 : "boot_bak"
479[ 2.347412] 0x000009080000-0x00000c380000 : "sys_bak"
480[ 2.352405] 0x00000c380000-0x00000c4c0000 : "tz_bak"
481[ 2.357503] 0x00000c4c0000-0x00000c5c0000 : "rpm_bak"
482[ 2.362401] 0x00000c5c0000-0x00000c800000 : "efs2_bak"
483[ 2.367622] 0x00000c800000-0x000010e40000 : "usrdata"
484[ 2.372596] 0x000010e40000-0x000014080000 : "usrlog"
485[ 2.377624] 0x000014080000-0x000020000000 : "system"
486[ 2.382487] msm_nand_probe: NANDc phys addr 0x7980000, BAM phys addr 0x7984000, BAM IRQ 164
487[ 2.390001] msm_nand_probe: Allocated DMA buffer at virt_addr 0xcf850000, phys_addr 0x8f850000
488[ 2.401334] PPP generic driver version 2.4.2
489[ 2.411580] ------------[ cut here ]------------
490[ 2.415231] WARNING: CPU: 0 PID: 1 at /home/xiaoqinqin/SLT181-ouzhou_PV/mdm9607-le-1-0_amss_standard_oem/apps_proc/oe-core/build/tmp-glibc/work-shared/mdm9607/kernel-source/arch/arm/mm/ioremap.c:302 __arm_ioremap_pfn_caller+0xfc/0x200()
491[ 2.436120] Modules linked in:
492[ 2.439125] CPU: 0 PID: 1 Comm: swapper Not tainted 3.18.20 #1
493[ 2.444990] [<c0013f5c>] (unwind_backtrace) from [<c0011f94>] (show_stack+0x10/0x14)
494[ 2.452672] [<c0011f94>] (show_stack) from [<c001d50c>] (warn_slowpath_common+0x68/0x88)
495[ 2.460782] [<c001d50c>] (warn_slowpath_common) from [<c001d5bc>] (warn_slowpath_null+0x18/0x20)
496[ 2.469545] [<c001d5bc>] (warn_slowpath_null) from [<c0017cdc>] (__arm_ioremap_pfn_caller+0xfc/0x200)
497[ 2.478747] [<c0017cdc>] (__arm_ioremap_pfn_caller) from [<c0017e2c>] (__arm_ioremap_caller+0x4c/0x54)
498[ 2.488035] [<c0017e2c>] (__arm_ioremap_caller) from [<c030a10c>] (cnss_sdio_probe+0x620/0x894)
499[ 2.496720] [<c030a10c>] (cnss_sdio_probe) from [<c0281bf4>] (platform_drv_probe+0x30/0x7c)
500[ 2.505050] [<c0281bf4>] (platform_drv_probe) from [<c0280210>] (driver_probe_device+0x134/0x344)
501[ 2.513870] [<c0280210>] (driver_probe_device) from [<c02804cc>] (__driver_attach+0x68/0x8c)
502[ 2.522324] [<c02804cc>] (__driver_attach) from [<c027e820>] (bus_for_each_dev+0x6c/0x90)
503[ 2.530481] [<c027e820>] (bus_for_each_dev) from [<c027f8d0>] (bus_add_driver+0x104/0x1f4)
504[ 2.538727] [<c027f8d0>] (bus_add_driver) from [<c0280d1c>] (driver_register+0x9c/0xe0)
505[ 2.546711] [<c0280d1c>] (driver_register) from [<c0008a8c>] (do_one_initcall+0x19c/0x1dc)
506[ 2.554962] [<c0008a8c>] (do_one_initcall) from [<c0ba1d94>] (kernel_init_freeable+0xf0/0x1b0)
507[ 2.563526] [<c0ba1d94>] (kernel_init_freeable) from [<c07c625c>] (kernel_init+0x8/0xe4)
508[ 2.571629] [<c07c625c>] (kernel_init) from [<c000e760>] (ret_from_fork+0x14/0x34)
509[ 2.579200] ---[ end trace 62c9884cddf891ac ]---
510[ 2.583746] cnss_configure_ramdump: ramdump addr: (null), phys: 0x87a00000 subsys:'AR6320'
511[ 2.592377] cnss_configure_ramdump: CNSS ramdump will not be collected
512[ 2.598971] cnss_sdio 87a00000.qcom,cnss-sdio: CNSS SDIO Driver registered
513[ 2.608014] msm_otg 78d9000.usb: msm_otg probe
514[ 2.613821] msm_otg 78d9000.usb: OTG regs = d08f8000
515[ 2.620387] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
516[ 2.626345] ehci-msm: Qualcomm On-Chip EHCI Host Controller
517[ 2.631817] usbcore: registered new interface driver cdc_acm
518[ 2.637139] cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters
519[ 2.645191] usbcore: registered new interface driver usb-storage
520[ 2.651102] usbcore: registered new interface driver ums-alauda
521[ 2.657049] usbcore: registered new interface driver ums-cypress
522[ 2.662990] usbcore: registered new interface driver ums-datafab
523[ 2.669042] usbcore: registered new interface driver ums-freecom
524[ 2.675014] usbcore: registered new interface driver ums-isd200
525[ 2.680871] usbcore: registered new interface driver ums-jumpshot
526[ 2.687001] usbcore: registered new interface driver ums-karma
527[ 2.692762] usbcore: registered new interface driver ums-onetouch
528[ 2.698884] usbcore: registered new interface driver ums-sddr09
529[ 2.704790] usbcore: registered new interface driver ums-sddr55
530[ 2.710645] usbcore: registered new interface driver ums-usbat
531[ 2.716509] usbcore: registered new interface driver usb_ehset_test
532[ 2.724245] gbridge_init: gbridge_init successs.
533[ 2.729923] msm_otg 78d9000.usb: phy_reset: success
534[ 2.733945] bmi160 4-0068: BMI160 i2c function probe entrance
535[ 2.740173] bmi160 4-0068: Regulator client_data->vdd enable success!
536[ 2.746094] i2c-msm-v2 78b8000.i2c: msm_bus_scale_register_client(mstr-id:86):0x4 (ok)
537[ 2.754347] (NULL device *): Bosch Sensortec Device detected, HW IC name: BMI160C3
538[ 2.761637] input: bmi160_accel as /devices/virtual/input/input3
539[ 2.767533] bmi160 4-0068: bmi160 input_accel register successfully!
540[ 2.773908] input: bmi160_gyro as /devices/virtual/input/input4
541[ 2.779764] bmi160 4-0068: bmi160 input register successfully, bmi160_gyro!
542[ 2.787094] dev->platform_data = NULL
543[ 2.790190] client_data->bst_pd = NULL
544[ 2.795632] bmi160 4-0068:
545[ 2.795632] From 0x00:
546[ 2.800904] bmi160 4-0068: d3 21 00 00 00 00 00 00 00 00 00 00 00 00 00 00
547[ 2.800904] 00 00 00 00 00 00 00 00 e7 01 02 10 00 00 00 00
548[ 2.800904] 00 80 00 00
549[ 2.815058] sps: BAM device 0x07884000 is not registered yet.
550[ 2.821155] sps:BAM 0x07884000 is registered.
551[ 2.825101] sps:BAM 0x07884000 (va:0xd09c0000) enabled: ver:0x18, number of pipes:24
552[ 2.837318] bmi160 4-0068:
553[ 2.837318] From 0x40:
554[ 2.841463] bmi160 4-0068:
555[ 2.841463] 28 03 28 00 0b 88 80 10 00 00 00 20 80 42 4c 00
556[ 2.841463] 00 00 00 00 00 00 00 00 00 00 07 30 81 0b c0 00
557[ 2.841463] 14 14 24 04 0a 18 48 08 11 00 00 00 00 00 00 00
558[ 2.841463] 00 00 00 00 30 5c 04 00 00 00 15 03 00 00 00 00
559[ 2.841463] d3 21 00 00 00 00 00 00 00 00 00 00 00 00 00 00
560[ 2.841463] 00 00 00 00 00 00
561[ 2.881399] bmi160 4-0068: BMI160 qpio number:29
562[ 2.963955] bmi160 4-0068: sensor_time:65535, 65536, 2560000
563[ 2.968618] bmi160 4-0068: sensor bmi160 probed successfully
564[ 2.974311] i2c-core: driver [bmi160] using legacy suspend method
565[ 2.980292] i2c-core: driver [bmi160] using legacy resume method
566[ 2.987309] aw9523b_chip2_probe start
567[ 3.060597] controller_power(4)
568[ 3.062966] i2c-msm-v2 78b8000.i2c: NACK: slave not responding, ensure its powered: msgs(n:1 cur:0 tx) bc(rx:0 tx:2) mode:FIFO slv_addr:0x58 MSTR_STS:0x0d1300c8 OPER:0x00000090
569[ 3.098846] i2c-msm-v2 78b8000.i2c: NACK: slave not responding, ensure its powered: msgs(n:2 cur:0 tx) bc(rx:1 tx:1) mode:FIFO slv_addr:0x58 MSTR_STS:0x0d1300c8 OPER:0x00000010
570[ 3.113606] aw9523b_chip2 4-0058: I2C read error
571[ 3.138582] i2c-msm-v2 78b8000.i2c: NACK: slave not responding, ensure its powered: msgs(n:2 cur:0 tx) bc(rx:1 tx:1) mode:FIFO slv_addr:0x58 MSTR_STS:0x0d1300c8 OPER:0x00000010
572[ 3.153335] aw9523b_chip2 4-0058: I2C read error
573[ 3.178310] i2c-msm-v2 78b8000.i2c: NACK: slave not responding, ensure its powered: msgs(n:2 cur:0 tx) bc(rx:1 tx:1) mode:FIFO slv_addr:0x58 MSTR_STS:0x0d1300c8 OPER:0x00000010
574[ 3.193119] aw9523b_chip2 4-0058: I2C read error
575[ 3.218042] i2c-msm-v2 78b8000.i2c: NACK: slave not responding, ensure its powered: msgs(n:2 cur:0 tx) bc(rx:1 tx:1) mode:FIFO slv_addr:0x58 MSTR_STS:0x0d1300c8 OPER:0x00000010
576[ 3.232794] aw9523b_chip2 4-0058: I2C read error
577[ 3.257820] i2c-msm-v2 78b8000.i2c: NACK: slave not responding, ensure its powered: msgs(n:2 cur:0 tx) bc(rx:1 tx:1) mode:FIFO slv_addr:0x58 MSTR_STS:0x0d1300c8 OPER:0x00000010
578[ 3.272577] aw9523b_chip2 4-0058: I2C read error
579[ 3.297347] aw9523b_chip2 4-0058: get i2c device id failed !
580[ 3.302056] aw9523b_chip2 4-0058: init_ext_dev error !
581[ 3.307225] aw9523b_chip2: probe of 4-0058 failed with error -107
582[ 3.314178] qcom,qpnp-rtc qpnp-rtc-cf324600: rtc core: registered qpnp_rtc as rtc0
583[ 3.321165] i2c /dev entries driver
584[ 3.325580] unable to find DT imem DLOAD mode node
585[ 3.329633] unable to find DT imem EDLOAD mode node
586[ 3.334832] unable to find DT imem dload-type node
587[ 3.363138] Bluetooth: HCI UART driver ver 2.2
588[ 3.366610] Bluetooth: HCI H4 protocol initialized
589[ 3.371320] Bluetooth: HCI_IBS protocol initialized
590[ 3.376381] bt_dt_parse_vreg_info: qca,bt-vdd-core: is not provided in device tree
591[ 3.383780] bt_power bt_qca6174: no qca,bt-vdd-pa-voltage-level property
592[ 3.390559] bt_dt_parse_vreg_info: qca,bt-vdd-ldo: is not provided in device tree
593[ 3.397926] bt_dt_parse_vreg_info: qca,bt-chip-pwd: is not provided in device tree
594[ 3.406476] sdhci: Secure Digital Host Controller Interface driver
595[ 3.411616] sdhci: Copyright(c) Pierre Ossman
596[ 3.416026] sdhci-pltfm: SDHCI platform and OF driver helper
597[ 3.422244] usbcore: registered new interface driver usbhid
598[ 3.427214] usbhid: USB HID core driver
599[ 3.432645] sps:BAM 0x078c4000 is registered.
600[ 3.436069] IPA HW is not supported on this target
601[ 3.441238] bimc-bwmon 408000.qcom,cpu-bwmon: BW HWmon governor registered.
602[ 3.448599] devfreq soc:qcom,cpubw: Couldn't update frequency transition information.
603[ 3.455987] coresight-fuse a601c.fuse: QPDI fuse not specified
604[ 3.461438] coresight-fuse a601c.fuse: Fuse initialized
605[ 3.470230] coresight-csr 6001000.csr: CSR initialized
606[ 3.475034] coresight-tmc 6026000.tmc: Byte Counter feature enabled
607[ 3.481199] sps:BAM 0x06084000 is registered.
608[ 3.485358] coresight-tmc 6026000.tmc: TMC initialized
609[ 3.490507] coresight-tmc 6025000.tmc: TMC initialized
610[ 3.497219] nidnt boot config: 0
611[ 3.500488] coresight-tpiu 6020000.tpiu: NIDnT on SDCARD only mode
612[ 3.505867] coresight-tpiu 6020000.tpiu: TPIU initialized
613[ 3.512390] coresight-replicator 6024000.replicator: REPLICATOR initialized
614[ 3.519226] coresight-dbgui 606d000.dbgui: DebugUI capture enabled
615[ 3.524756] coresight-dbgui 606d000.dbgui: DebugUI initializaed
616[ 3.531078] coresight-stm 6002000.stm: STM initialized
617[ 3.536202] coresight-hwevent 606c000.hwevent: Hardware Event driver initialized
618[ 3.543725] coresight-etm 6042000.etm: ETM initialized
619[ 3.549327] coresight-remote-etm soc:rpm_etm0: Remote ETM initialized
620[ 3.555217] coresight-remote-etm soc:modem_etm0: Remote ETM initialized
621[ 3.561973] odm_notify_init:netlink_init.
622[ 3.565461] odm_notify_init:creat socket ok.
623[ 3.598007] msm-compr-dsp soc:qcom,msm-compr-dsp: msm_compr_probe: dev name soc:qcom,msm-compr-dsp
624[ 3.608086] msm_pcm_probe: dev name soc:qcom,msm-voice-host-pcm
625[ 3.620587] mdm9607-asoc-tomtom soc:sound: ASoC: platform (null) not registered
626[ 3.627407] Netfilter messages via NETLINK v0.30.
627[ 3.631649] nf_conntrack version 0.5.0 (2441 buckets, 9764 max)
628[ 3.638289] ctnetlink v0.93: registering with nfnetlink.
629[ 3.643472] ip_set: protocol 6
630[ 3.646416] ip_tables: (C) 2000-2006 Netfilter Core Team
631[ 3.651276] arp_tables: (C) 2002 David S. Miller
632[ 3.655859] TCP: cubic registered
633[ 3.659904] NET: Registered protocol family 10
634[ 3.666015] ip6_tables: (C) 2000-2006 Netfilter Core Team
635[ 3.670602] sit: IPv6 over IPv4 tunneling driver
636[ 3.675868] NET: Registered protocol family 17
637[ 3.679497] bridge: automatic filtering via arp/ip/ip6tables has been deprecated. Update your scripts to load br_netfilter if you need this.
638[ 3.692091] Bridge firewalling registered
639[ 3.696036] Ebtables v2.0 registered
640[ 3.700499] NET: Registered protocol family 27
641[ 3.710101] batt adc is probe and get adc ok
642[ 3.713351] Create batt sys file succ rc = 0
643[ 3.738755] msm-pcm-routing soc:qcom,msm-pcm-routing: ASoC: no dapm match for VOICEMMODE1_DL --> VoiceMMode1 --> SEC_MI2S_RX_Voice Mixer
644[ 3.750045] msm-pcm-routing soc:qcom,msm-pcm-routing: ASoC: Failed to add route VOICEMMODE1_DL -> VoiceMMode1 -> SEC_MI2S_RX_Voice Mixer
645[ 3.762289] msm-pcm-routing soc:qcom,msm-pcm-routing: ASoC: no dapm match for VOICEMMODE2_DL --> VoiceMMode2 --> SEC_MI2S_RX_Voice Mixer
646[ 3.774504] msm-pcm-routing soc:qcom,msm-pcm-routing: ASoC: Failed to add route VOICEMMODE2_DL -> VoiceMMode2 -> SEC_MI2S_RX_Voice Mixer
647[ 3.793513] msm-pcm-routing soc:qcom,msm-pcm-routing: ASoC: no dapm match for VOICE2_STUB_DL --> Voice2 Stub --> INTERNAL_BT_SCO_RX_Voice Mixer
648[ 3.805406] msm-pcm-routing soc:qcom,msm-pcm-routing: ASoC: Failed to add route VOICE2_STUB_DL -> Voice2 Stub -> INTERNAL_BT_SCO_RX_Voice Mixer
649[ 3.819180] msm-pcm-routing soc:qcom,msm-pcm-routing: ASoC: no sink widget found for SENARY_MI2S_TX
650[ 3.827261] msm-pcm-routing soc:qcom,msm-pcm-routing: ASoC: Failed to add route BE_IN -> direct -> SENARY_MI2S_TX
651[ 3.891933] msm-pcm-routing soc:qcom,msm-pcm-routing: ASoC: mux SLIM_0_RX AANC MUX has no paths
652[ 3.913134] msm-dai-stub-dev soc:qcom,msm-dai-stub:qcom,msm-dai-stub-dtmf-tx: ASoC: no sink widget found for STUB_DTMF_TX
653[ 3.923142] msm-dai-stub-dev soc:qcom,msm-dai-stub:qcom,msm-dai-stub-dtmf-tx: ASoC: Failed to add route DTMF TX -> direct -> STUB_DTMF_TX
654[ 3.935491] msm-dai-stub-dev soc:qcom,msm-dai-stub:qcom,msm-dai-stub-host-rx-capture-tx: ASoC: no sink widget found for STUB_HOST_RX_CAPTURE_TX
655[ 3.948276] msm-dai-stub-dev soc:qcom,msm-dai-stub:qcom,msm-dai-stub-host-rx-capture-tx: ASoC: Failed to add route CS-VOICE HOST RX CAPTURE -> direct -> STUB_HOST_RX_CAPTURE_TX
656[ 3.964054] msm-dai-stub-dev soc:qcom,msm-dai-stub:qcom,msm-dai-stub-host-rx-playback-rx: ASoC: no source widget found for STUB_HOST_RX_PLAYBACK_RX
657[ 3.977177] msm-dai-stub-dev soc:qcom,msm-dai-stub:qcom,msm-dai-stub-host-rx-playback-rx: ASoC: Failed to add route STUB_HOST_RX_PLAYBACK_RX -> direct -> CS-VOICE HOST RX PLAYBACK
658[ 3.993192] msm-dai-stub-dev soc:qcom,msm-dai-stub:qcom,msm-dai-stub-host-tx-capture-tx: ASoC: no sink widget found for STUB_HOST_TX_CAPTURE_TX
659[ 4.006002] msm-dai-stub-dev soc:qcom,msm-dai-stub:qcom,msm-dai-stub-host-tx-capture-tx: ASoC: Failed to add route CS-VOICE HOST TX CAPTURE -> direct -> STUB_HOST_TX_CAPTURE_TX
660[ 4.021760] msm-dai-stub-dev soc:qcom,msm-dai-stub:qcom,msm-dai-stub-host-tx-playback-rx: ASoC: no source widget found for STUB_HOST_TX_PLAYBACK_RX
661[ 4.034907] msm-dai-stub-dev soc:qcom,msm-dai-stub:qcom,msm-dai-stub-host-tx-playback-rx: ASoC: Failed to add route STUB_HOST_TX_PLAYBACK_RX -> direct -> CS-VOICE HOST TX PLAYBACK
662[ 4.058978] mdm9607-asoc-tomtom soc:sound: ASoC: no source widget found for MCLK
663[ 4.065427] mdm9607-asoc-tomtom soc:sound: ASoC: Failed to add route MCLK -> direct -> RX_BIAS
664[ 4.074045] mdm9607-asoc-tomtom soc:sound: ASoC: no source widget found for MCLK
665[ 4.081317] mdm9607-asoc-tomtom soc:sound: ASoC: Failed to add route MCLK -> direct -> LDO_H
666[ 4.090044] mdm9607-asoc-tomtom soc:sound: ASoC: no source widget found for MIC BIAS2 External
667[ 4.098376] mdm9607-asoc-tomtom soc:sound: ASoC: Failed to add route MIC BIAS2 External -> direct -> AMIC2
668[ 4.108046] mdm9607-asoc-tomtom soc:sound: ASoC: no source widget found for Headset Mic
669[ 4.115990] mdm9607-asoc-tomtom soc:sound: ASoC: Failed to add route Headset Mic -> direct -> MIC BIAS2 External
670[ 4.126182] mdm9607-asoc-tomtom soc:sound: ASoC: no source widget found for MIC BIAS2 External
671[ 4.134734] mdm9607-asoc-tomtom soc:sound: ASoC: Failed to add route MIC BIAS2 External -> direct -> AMIC3
672[ 4.144404] mdm9607-asoc-tomtom soc:sound: ASoC: no source widget found for ANCRight Headset Mic
673[ 4.153107] mdm9607-asoc-tomtom soc:sound: ASoC: Failed to add route ANCRight Headset Mic -> direct -> MIC BIAS2 External
674[ 4.164323] mdm9607-asoc-tomtom soc:sound: ASoC: no source widget found for MIC BIAS2 External
675[ 4.172636] mdm9607-asoc-tomtom soc:sound: ASoC: Failed to add route MIC BIAS2 External -> direct -> AMIC4
676[ 4.182370] mdm9607-asoc-tomtom soc:sound: ASoC: no source widget found for ANCLeft Headset Mic
677[ 4.190995] mdm9607-asoc-tomtom soc:sound: ASoC: Failed to add route ANCLeft Headset Mic -> direct -> MIC BIAS2 External
678[ 4.201878] mdm9607-asoc-tomtom soc:sound: ASoC: no source widget found for MIC BIAS1 External
679[ 4.210435] mdm9607-asoc-tomtom soc:sound: ASoC: Failed to add route MIC BIAS1 External -> direct -> AMIC5
680[ 4.220097] mdm9607-asoc-tomtom soc:sound: ASoC: no source widget found for Handset Mic
681[ 4.228051] mdm9607-asoc-tomtom soc:sound: ASoC: Failed to add route Handset Mic -> direct -> MIC BIAS1 External
682[ 4.238237] mdm9607-asoc-tomtom soc:sound: ASoC: no source widget found for MIC BIAS1 External
683[ 4.246804] mdm9607-asoc-tomtom soc:sound: ASoC: Failed to add route MIC BIAS1 External -> direct -> AMIC6
684[ 4.256469] mdm9607-asoc-tomtom soc:sound: ASoC: no source widget found for Handset Mic
685[ 4.264421] mdm9607-asoc-tomtom soc:sound: ASoC: Failed to add route Handset Mic -> direct -> MIC BIAS1 External
686[ 4.274608] mdm9607-asoc-tomtom soc:sound: ASoC: no source widget found for MIC BIAS1 External
687[ 4.283137] mdm9607-asoc-tomtom soc:sound: ASoC: Failed to add route MIC BIAS1 External -> direct -> DMIC1
688[ 4.292842] mdm9607-asoc-tomtom soc:sound: ASoC: no source widget found for Digital Mic1
689[ 4.300881] mdm9607-asoc-tomtom soc:sound: ASoC: Failed to add route Digital Mic1 -> direct -> MIC BIAS1 External
690[ 4.311151] mdm9607-asoc-tomtom soc:sound: ASoC: no source widget found for MIC BIAS3 External
691[ 4.319718] mdm9607-asoc-tomtom soc:sound: ASoC: Failed to add route MIC BIAS3 External -> direct -> DMIC3
692[ 4.329385] mdm9607-asoc-tomtom soc:sound: ASoC: no source widget found for Digital Mic3
693[ 4.337595] mdm9607-asoc-tomtom soc:sound: ASoC: Failed to add route Digital Mic3 -> direct -> MIC BIAS3 External
694[ 4.448841] ubi0: attaching mtd23
695[ 5.287076] ubi0: scanning is finished
696[ 5.298048] ubi0: attached mtd23 (name "system", size 191 MiB)
697[ 5.302847] ubi0: PEB size: 262144 bytes (256 KiB), LEB size: 253952 bytes
698[ 5.309781] ubi0: min./max. I/O unit sizes: 4096/4096, sub-page size 4096
699[ 5.316512] ubi0: VID header offset: 4096 (aligned 4096), data offset: 8192
700[ 5.323420] ubi0: good PEBs: 762, bad PEBs: 4, corrupted PEBs: 0
701[ 5.329441] ubi0: user volume: 3, internal volumes: 1, max. volumes count: 128
702[ 5.336823] ubi0: max/mean erase counter: 189/87, WL threshold: 4096, image sequence number: 1328192
703[ 5.345765] ubi0: available PEBs: 0, total reserved PEBs: 762, PEBs reserved for bad PEB handling: 36
704[ 5.354974] ubi0: background thread "ubi_bgt0d" started, PID 121
705[ 5.360960] RNDIS_IPA module is loaded.
706[ 5.365421] file system registered
707[ 5.368233] mbim_init: initialize 1 instances
708[ 5.372573] mbim_init: Initialized 1 ports
709[ 5.379128] rndis_qc_init: initialize rndis QC instance
710[ 5.383736] Number of LUNs=8
711[ 5.386345] Mass Storage Function, version: 2009/09/11
712[ 5.391308] LUN: removable file: (no medium)
713[ 5.395673] Number of LUNs=1
714[ 5.398533] LUN: removable file: (no medium)
715[ 5.402677] Number of LUNs=1
716[ 5.405987] android_usb gadget: android_usb ready
717[ 5.410234] msm_hsusb msm_hsusb: [ci13xxx_start] hw_ep_max = 32
718[ 5.416220] msm_hsusb msm_hsusb: CI13XXX_CONTROLLER_RESET_EVENT received
719[ 5.422860] msm_hsusb msm_hsusb: CI13XXX_CONTROLLER_UDC_STARTED_EVENT received
720[ 5.430807] qcom,qpnp-rtc qpnp-rtc-cf324600: setting system clock to 1970-01-01 00:00:08 UTC (8)
721[ 5.441388] parse_legacy_cluster_params(): Ignoring cluster params
722[ 5.446678] ------------[ cut here ]------------
723[ 5.451151] WARNING: CPU: 0 PID: 1 at /home/xiaoqinqin/SLT181-ouzhou_PV/mdm9607-le-1-0_amss_standard_oem/apps_proc/oe-core/build/tmp-glibc/work-shared/mdm9607/kernel-source/drivers/cpuidle/lpm-levels-of.c:739 parse_cluster+0xb68/0xcd0()
724[ 5.472129] Modules linked in:
725[ 5.475097] CPU: 0 PID: 1 Comm: swapper Tainted: G W 3.18.20 #1
726[ 5.482058] [<c0013f5c>] (unwind_backtrace) from [<c0011f94>] (show_stack+0x10/0x14)
727[ 5.489846] [<c0011f94>] (show_stack) from [<c001d50c>] (warn_slowpath_common+0x68/0x88)
728[ 5.498079] [<c001d50c>] (warn_slowpath_common) from [<c001d5bc>] (warn_slowpath_null+0x18/0x20)
729[ 5.506800] [<c001d5bc>] (warn_slowpath_null) from [<c04294dc>] (parse_cluster+0xb68/0xcd0)
730[ 5.515096] [<c04294dc>] (parse_cluster) from [<c0426a8c>] (lpm_probe+0xc/0x1ec)
731[ 5.522430] [<c0426a8c>] (lpm_probe) from [<c0281bf4>] (platform_drv_probe+0x30/0x7c)
732[ 5.530281] [<c0281bf4>] (platform_drv_probe) from [<c0280210>] (driver_probe_device+0x134/0x344)
733[ 5.539143] [<c0280210>] (driver_probe_device) from [<c02804cc>] (__driver_attach+0x68/0x8c)
734[ 5.547520] [<c02804cc>] (__driver_attach) from [<c027e820>] (bus_for_each_dev+0x6c/0x90)
735[ 5.555607] [<c027e820>] (bus_for_each_dev) from [<c027f8d0>] (bus_add_driver+0x104/0x1f4)
736[ 5.563813] [<c027f8d0>] (bus_add_driver) from [<c0280d1c>] (driver_register+0x9c/0xe0)
737[ 5.571834] [<c0280d1c>] (driver_register) from [<c0bc9bbc>] (lpm_levels_module_init+0x14/0x38)
738[ 5.580515] [<c0bc9bbc>] (lpm_levels_module_init) from [<c0008a8c>] (do_one_initcall+0x19c/0x1dc)
739[ 5.589371] [<c0008a8c>] (do_one_initcall) from [<c0ba1d94>] (kernel_init_freeable+0xf0/0x1b0)
740[ 5.597967] [<c0ba1d94>] (kernel_init_freeable) from [<c07c625c>] (kernel_init+0x8/0xe4)
741[ 5.606036] [<c07c625c>] (kernel_init) from [<c000e760>] (ret_from_fork+0x14/0x34)
742[ 5.613552] ---[ end trace 62c9884cddf891ae ]---
743[ 5.618198] ------------[ cut here ]------------
744[ 5.622755] WARNING: CPU: 0 PID: 1 at /home/xiaoqinqin/SLT181-ouzhou_PV/mdm9607-le-1-0_amss_standard_oem/apps_proc/oe-core/build/tmp-glibc/work-shared/mdm9607/kernel-source/drivers/cpuidle/lpm-levels-of.c:739 parse_cluster+0xb68/0xcd0()
745[ 5.643705] Modules linked in:
746[ 5.646709] CPU: 0 PID: 1 Comm: swapper Tainted: G W 3.18.20 #1
747[ 5.653663] [<c0013f5c>] (unwind_backtrace) from [<c0011f94>] (show_stack+0x10/0x14)
748[ 5.661417] [<c0011f94>] (show_stack) from [<c001d50c>] (warn_slowpath_common+0x68/0x88)
749[ 5.669496] [<c001d50c>] (warn_slowpath_common) from [<c001d5bc>] (warn_slowpath_null+0x18/0x20)
750[ 5.678256] [<c001d5bc>] (warn_slowpath_null) from [<c04294dc>] (parse_cluster+0xb68/0xcd0)
751[ 5.686591] [<c04294dc>] (parse_cluster) from [<c0426a8c>] (lpm_probe+0xc/0x1ec)
752[ 5.693937] [<c0426a8c>] (lpm_probe) from [<c0281bf4>] (platform_drv_probe+0x30/0x7c)
753[ 5.701784] [<c0281bf4>] (platform_drv_probe) from [<c0280210>] (driver_probe_device+0x134/0x344)
754[ 5.710637] [<c0280210>] (driver_probe_device) from [<c02804cc>] (__driver_attach+0x68/0x8c)
755[ 5.719059] [<c02804cc>] (__driver_attach) from [<c027e820>] (bus_for_each_dev+0x6c/0x90)
756[ 5.727218] [<c027e820>] (bus_for_each_dev) from [<c027f8d0>] (bus_add_driver+0x104/0x1f4)
757[ 5.735464] [<c027f8d0>] (bus_add_driver) from [<c0280d1c>] (driver_register+0x9c/0xe0)
758[ 5.743418] [<c0280d1c>] (driver_register) from [<c0bc9bbc>] (lpm_levels_module_init+0x14/0x38)
759[ 5.752132] [<c0bc9bbc>] (lpm_levels_module_init) from [<c0008a8c>] (do_one_initcall+0x19c/0x1dc)
760[ 5.760985] [<c0008a8c>] (do_one_initcall) from [<c0ba1d94>] (kernel_init_freeable+0xf0/0x1b0)
761[ 5.769578] [<c0ba1d94>] (kernel_init_freeable) from [<c07c625c>] (kernel_init+0x8/0xe4)
762[ 5.777651] [<c07c625c>] (kernel_init) from [<c000e760>] (ret_from_fork+0x14/0x34)
763[ 5.785198] ---[ end trace 62c9884cddf891af ]---
764[ 5.789773] /soc/qcom,lpm-levels/qcom,pm-cluster@0: No CPU phandle, assuming single cluster
765[ 5.801580] qcom,cc-debug-mdm9607 1800000.qcom,debug: Registered Debug Mux successfully
766[ 5.809015] emac_lan_vreg: disabling
767[ 5.812144] mem_acc_corner: disabling
768[ 5.815819] clock_late_init: Removing enables held for handed-off clocks
769[ 5.824246] ALSA device list:
770[ 5.826223] #0: mdm9607-tomtom-i2s-sþ[ 5.844095] UBIFS (ubi0:0): background thread "ubifs_bgt0_0" started, PID 127
771[ 5.907505] UBIFS (ubi0:0): recovery needed
772[ 6.152882] UBIFS (ubi0:0): recovery completed
773[ 6.156453] UBIFS (ubi0:0): UBIFS: mounted UBI device 0, volume 0, name "rootfs"
774[ 6.163672] UBIFS (ubi0:0): LEB size: 253952 bytes (248 KiB), min./max. I/O unit sizes: 4096 bytes/4096 bytes
775[ 6.173614] UBIFS (ubi0:0): FS size: 81518592 bytes (77 MiB, 321 LEBs), journal size 9404416 bytes (8 MiB, 38 LEBs)
776[ 6.184021] UBIFS (ubi0:0): reserved for root: 0 bytes (0 KiB)
777[ 6.189806] UBIFS (ubi0:0): media format: w4/r0 (latest is w4/r0), UUID 00BCF7FA-593E-40BF-B7CC-8A307BDAE227, small LPT model
778[ 6.204142] VFS: Mounted root (ubifs filesystem) on device 0:12.
779[ 6.209782] Freeing unused kernel memory: 348K (c0ba1000 - c0bf8000)
780
781INIT: version 2.88 booting
782
783[ 6.554110] mount (130) used greatest stack depth: 5020 bytes left
784[ 7.067099] mdev (145) used greatest stack depth: 4812 bytes left
785[ 7.086062] S03mdev (139) used greatest stack depth: 4436 bytes left
786ln: /system/bin/sh: File exists
787
788Switching to composition number Prj_slm_0x9025
789
790[ 7.341396] enable_store: android_usb: already disabled
791Starting adbd: done
792
793[ 7.434136] UBIFS (ubi0:1): background thread "ubifs_bgt0_1" started, PID 180
794[ 7.535373] read descriptors
795[ 7.537235] read strings
796[ 7.546356] UBIFS (ubi0:1): recovery needed
797[ 7.554581] msm_hsusb msm_hsusb: CI13XXX_CONTROLLER_CONNECT_EVENT received
798[ 7.804732] UBIFS (ubi0:1): recovery completed
799[ 7.808257] UBIFS (ubi0:1): UBIFS: mounted UBI device 0, volume 1, name "usrfs"
800[ 7.815481] UBIFS (ubi0:1): LEB size: 253952 bytes (248 KiB), min./max. I/O unit sizes: 4096 bytes/4096 bytes
801[ 7.825365] UBIFS (ubi0:1): FS size: 23109632 bytes (22 MiB, 91 LEBs), journal size 5210112 bytes (4 MiB, 21 LEBs)
802[ 7.835691] UBIFS (ubi0:1): reserved for root: 0 bytes (0 KiB)
803[ 7.841482] UBIFS (ubi0:1): media format: w4/r0 (latest is w4/r0), UUID 503E2B00-9B4E-4584-AF6F-CF4CCDDBDA58, small LPT model
804MTD : Detected block device usrdata
805
806[ 7.921619] ubi3: attaching mtd21
807[ 8.232699] ubi3: scanning is finished
808[ 8.243021] ubi3: attached mtd21 (name "usrdata", size 70 MiB)
809[ 8.256346] ubi3: PEB size: 262144 bytes (256 KiB), LEB size: 253952 bytes
810[ 8.262191] ubi3: min./max. I/O unit sizes: 4096/4096, sub-page size 4096
811[ 8.282624] ubi3: VID header offset: 4096 (aligned 4096), data offset: 8192
812[ 8.288677] ubi3: good PEBs: 281, bad PEBs: 0, corrupted PEBs: 0
813[ 8.294912] ubi3: user volume: 1, internal volumes: 1, max. volumes count: 128
814[ 8.301746] ubi3: max/mean erase counter: 5/2, WL threshold: 4096, image sequence number: 303301672
815[ 8.310858] ubi3: available PEBs: 0, total reserved PEBs: 281, PEBs reserved for bad PEB handling: 40
816[ 8.320052] ubi3: background thread "ubi_bgt3d" started, PID 200
817UBI device number 3, total 281 LEBs (71360512 bytes, 68.1 MiB), available 0 LEBs (0 bytes), LEB size 253952 bytes (248.0 KiB)
818
819[ 8.354145] UBIFS (ubi3:0): background thread "ubifs_bgt3_0" started, PID 204
820[ 8.413856] UBIFS (ubi3:0): recovery needed
821[ 8.562804] UBIFS (ubi3:0): recovery completed
822[ 8.566379] UBIFS (ubi3:0): UBIFS: mounted UBI device 3, volume 0, name "lime"
823[ 8.573425] UBIFS (ubi3:0): LEB size: 253952 bytes (248 KiB), min./max. I/O unit sizes: 4096 bytes/4096 bytes
824[ 8.583359] UBIFS (ubi3:0): FS size: 57647104 bytes (54 MiB, 227 LEBs), journal size 5210112 bytes (4 MiB, 21 LEBs)
825[ 8.593771] UBIFS (ubi3:0): reserved for root: 0 bytes (0 KiB)
826[ 8.599590] UBIFS (ubi3:0): media format: w4/r0 (latest is w4/r0), UUID 55157425-C5BE-490E-A130-B022C3CEE603, small LPT model
827==== break the loop,mount the ubi3_0 sucessfully ====
828
829MTD : Detected block device usrlog
830
831[ 8.648794] ubi4: attaching mtd22
832[ 8.865457] ubi4: scanning is finished
833[ 8.875654] ubi4: attached mtd22 (name "usrlog", size 50 MiB)
834[ 8.880364] ubi4: PEB size: 262144 bytes (256 KiB), LEB size: 253952 bytes
835[ 8.908234] ubi4: min./max. I/O unit sizes: 4096/4096, sub-page size 4096
836[ 8.915183] ubi4: VID header offset: 4096 (aligned 4096), data offset: 8192
837[ 8.921112] ubi4: good PEBs: 199, bad PEBs: 2, corrupted PEBs: 0
838[ 8.927209] ubi4: user volume: 1, internal volumes: 1, max. volumes count: 128
839[ 8.934545] ubi4: max/mean erase counter: 661/502, WL threshold: 4096, image sequence number: 1736813539
840[ 8.943766] ubi4: available PEBs: 32, total reserved PEBs: 167, PEBs reserved for bad PEB handling: 18
841[ 8.953153] ubi4: background thread "ubi_bgt4d" started, PID 214
842UBI device number 4, total 199 LEBs (50536448 bytes, 48.2 MiB), available 32 LEBs (8126464 bytes, 7.8 MiB), LEB size 253952 bytes (248.0 KiB)
843
844[ 8.984156] UBIFS (ubi4:0): background thread "ubifs_bgt4_0" started, PID 218
845[ 9.048674] UBIFS (ubi4:0): recovery needed
846[ 9.410522] UBIFS (ubi4:0): recovery completed
847[ 9.414095] UBIFS (ubi4:0): UBIFS: mounted UBI device 4, volume 0, name "log"
848[ 9.421054] UBIFS (ubi4:0): LEB size: 253952 bytes (248 KiB), min./max. I/O unit sizes: 4096 bytes/4096 bytes
849[ 9.430991] UBIFS (ubi4:0): FS size: 34283520 bytes (32 MiB, 135 LEBs), journal size 2031617 bytes (1 MiB, 7 LEBs)
850[ 9.441310] UBIFS (ubi4:0): reserved for root: 1619295 bytes (1581 KiB)
851[ 9.447910] UBIFS (ubi4:0): media format: w4/r0 (latest is w4/r0), UUID 1821AF49-F876-476E-89DA-E0F2BF0174C1, small LPT model
852==== break the loop,mount the ubi4_0 sucessfully ====
853
854MTD : Detected block device : /firmware for modem
855
856[ 9.512921] ubi1: attaching mtd9
857[ 9.817235] ubi1: scanning is finished
858[ 9.827558] ubi1: attached mtd9 (name "modem", size 69 MiB)
859[ 9.832095] ubi1: PEB size: 262144 bytes (256 KiB), LEB size: 253952 bytes
860[ 9.860877] ubi1: min./max. I/O unit sizes: 4096/4096, sub-page size 4096
861[ 9.867181] ubi1: VID header offset: 4096 (aligned 4096), data offset: 8192
862[ 9.873577] ubi1: good PEBs: 278, bad PEBs: 0, corrupted PEBs: 0
863[ 9.879659] ubi1: user volume: 1, internal volumes: 1, max. volumes count: 128
864[ 9.887192] ubi1: max/mean erase counter: 3/1, WL threshold: 4096, image sequence number: 34870392
865[ 9.895794] ubi1: available PEBs: 0, total reserved PEBs: 278, PEBs reserved for bad PEB handling: 40
866[ 9.904999] ubi1: background thread "ubi_bgt1d" started, PID 230
867UBI device number 1, total 278 LEBs (70598656 bytes, 67.3 MiB), available 0 LEBs (0 bytes), LEB size 253952 bytes (248.0 KiB)
868
869[ 10.064932] UBIFS (ubi1:0): UBIFS: mounted UBI device 1, volume 0, name "modem", R/O mode
870[ 10.072078] UBIFS (ubi1:0): LEB size: 253952 bytes (248 KiB), min./max. I/O unit sizes: 4096 bytes/4096 bytes
871[ 10.082025] UBIFS (ubi1:0): FS size: 56885248 bytes (54 MiB, 224 LEBs), journal size 9404416 bytes (8 MiB, 38 LEBs)
872[ 10.092426] UBIFS (ubi1:0): reserved for root: 0 bytes (0 KiB)
873[ 10.098239] UBIFS (ubi1:0): media format: w4/r0 (latest is w4/r0), UUID 26EF5BED-D1D7-4AC5-8210-6D30EC9CC5D6, small LPT model
874Starting psmd: done
875
876/firmware/image
877
878[ 10.352755] subsys-restart: __subsystem_get(): Changing subsys fw_name to modem
879[ 10.383125] pil-q6v5-mss 4080000.qcom,mss: modem: loading from 0x82a00000 to 0x87900000
880[ 10.433621] pil-q6v5-mss 4080000.qcom,mss: Debug policy not present - msadp. Continue.
881[ 10.458384] pil-q6v5-mss 4080000.qcom,mss: Loading MBA and DP (if present) from 0x8f900000 to 0x8fa00000
882[ 10.520782] pil-q6v5-mss 4080000.qcom,mss: MBA boot done
883Nothing to do. No firmware links needed.
884
885Starting QCMAP_ConnectionManager: [ 11.344374] QCMAP:start
886done
887
888Starting qti: [ 11.394288] QTI:start
889done
890
891[ 11.605989] rtc-dev.c:rtc_dev_ioctl:read-rtc over 1970-01-01 00:00:14
892Thu Jan 1 00:09:08 UTC 1970
893
894hwclock: RTC_SET_TIME: Invalid argument
895
896
897INIT: Entering runlevel: 5
898
899
900Configuring network interfaces... Cannot find device "eth0"
901
902[ 12.277283] USB QCMAP NL IOCTL Snd GETNEIGH Succ
903/var/spool/cron/crontabs is exist
904
905/limebike is exist
906
907/limebike/log is exist
908
909[ 12.395032] ------------[ cut here ]------------
910[ 12.398641] WARNING: CPU: 0 PID: 380 at /home/xiaoqinqin/SLT181-ouzhou_PV/mdm9607-le-1-0_amss_standard_oem/apps_proc/oe-core/build/tmp-glibc/work-shared/mdm9607/kernel-source/net/netfilter/nf_queue.c:35 nf_register_queue_handler+0x28/0x38()
911add logrotate.sh crond task
912
913[ 12.474120] Modules linked in:
914[ 12.476152] CPU: 0 PID: 380 Comm: sh Tainted: G W 3.18.20 #1
915[ 12.482852] [<c0013f5c>] (unwind_backtrace) from [<c0011f94>] (show_stack+0x10/0x14)
916crond[384]: crond (busybox 1.23.1) started, log level 8
917
918
919
920
921[ 12.517950] [<c0011f94>] (show_stack) from [<c001d50c>] (warn_slowpath_common+0x68/0x88)
922[ 12.534155] [<c001d50c>] (warn_slowpath_common) from [<c001d5bc>] (warn_slowpath_null+0x18/0x20)
923[ 12.541918] [<c001d5bc>] (warn_slowpath_null) from [<c065b5d8>] (nf_register_queue_handler+0x28/0x38)
924[ 12.586631] rtc-dev.c:rtc_dev_ioctl:read-rtc over 1970-01-01 00:00:15
925[ 12.593402] [<c065b5d8>] (nf_register_queue_handler) from [<c0676cc8>] (proc_sip_segment+0x58/0x9c)
926[ 12.614811] [<c0676cc8>] (proc_sip_segment) from [<c0130110>] (proc_sys_call_handler+0x98/0xb4)
927[ 12.622482] [<c0130110>] (proc_sys_call_handler) from [<c013013c>] (proc_sys_write+0x10/0x18)
928Starting syslogd done
929
930[ 12.665377] [<c013013c>] (proc_sys_write) from [<c00e3350>] (vfs_write+0xb8/0x170)
931[ 12.672350] [<c00e3350>] (vfs_write) from [<c00e37c0>] (SyS_write+0x40/0x80)
932Starting irsc_uti 12.707180] [<c00e37c0>] (SyS_write) from [<c000e6c0>] (ret_fast_syscall+0x0/0x38)
933[ 12.724246] ---[ end trace 62c9884cddf891b0 ]---
934Starting irsc tool
935
936Failed to open file:/etc/sec_config
937
938Absent/Invalid config,Default rules apply
939
940Ending irsc tool
941
942done
943
944Starting modem dependent daemons: [ 13.227235] QCMAP:Start DHCP server
945[ 13.375194] random: dnsmasq urandom read with 36 bits of entropy available
946[ 13.427440] QCMAP:DHCP server started
947[ 13.447388] QCMAP:DHCP server started
948[ 13.527382] QCMAP:Enable mobileap
949[ 17.301307] pil-q6v5-mss 4080000.qcom,mss: modem: Brought out of reset
950[ 17.394853] pil-q6v5-mss 4080000.qcom,mss: Subsystem error monitoring/handling services are up
951[ 17.402493] pil-q6v5-mss 4080000.qcom,mss: modem: Power/Clock ready interrupt received
952[ 17.410662] M-Notify: General: 7
953[ 17.469402] diag: In diag_send_feature_mask_update, control channel is not open, p: 0, c0dc4464
954[ 17.486177] apr_tal:Modem Is Up
955[ 17.955245] embms:start/load
956Starting/Loading embms_kernel module: done loading embms_kernel module
957
958Starting qmuxd: done
959
960Starting thermal-engine: done
961
962Starting netmgrd: done
963
964[ 18.206653] msm_thermal:set_enabled enabled = 0
965Starting qmi_shutdown_modem: done
966
967Starting notifymgr: done
968
969Starting subsystem_ramdump: done
970
971[ 18.853712] Shortcut_FE_IPV4:start/load
972Starting/Loading Shortcut_FE Driver: [ 18.901628] sps:BAM 0x04044000 is registered.
973[ 18.926469] sps:BAM 0x04044000 (va:0xd1fa0000) enabled: ver:0x27, number of pipes:6
974[ 18.950500] Shortcut_FE_IPV6:start/load
975[ 19.045200] Shortcut_FE_CM:start/load
976done loading Shortcut FE driver
977
978Starting system message bus: dbus.
979
980Starting modem dependent daemons: Starting diagrebootapp: done
981
982Starting atreset: done
983
984[ 19.708936] QCMAP:Enable mobileap done
985[ 19.757082] irq_set_enable: 1
986[ 19.814242] UBIFS (ubi0:2): background thread "ubifs_bgt0_2" started, PID 713
987[ 19.931450] UBIFS (ubi0:2): recovery needed
988[ 19.940054] QCMAP:Init Complete
989[ 19.991902] UBIFS (ubi0:2): recovery completed
990[ 19.995529] UBIFS (ubi0:2): UBIFS: mounted UBI device 0, volume 2, name "cachefs"
991[ 20.002783] UBIFS (ubi0:2): LEB size: 253952 bytes (248 KiB), min./max. I/O unit sizes: 4096 bytes/4096 bytes
992[ 20.012866] UBIFS (ubi0:2): FS size: 71106560 bytes (67 MiB, 280 LEBs), journal size 3555328 bytes (3 MiB, 14 LEBs)
993[ 20.023215] UBIFS (ubi0:2): reserved for root: 3358538 bytes (3279 KiB)
994[ 20.029801] UBIFS (ubi0:2): media format: w4/r0 (latest is w4/r0), UUID 07599B6D-4A46-4BDC-B07B-2D903BDCA9E5, small LPT model
995/limebike
996/limebike/lib
997/limebike
998Starting qti_ppp: 20.110918] QTI_PPP:start
999done
1000done
1001 * Starting Avahi Unicast DNS Configuration Daemon: avahi-dnsconfd
1002 ...fail!
1003Starting powerconfig for mdm9607: Starting fs-scrub-daemon: done
1004Starting pdc daemon: done
1005[ 21.015005] mbimd: Proc start
1006[ 21.137331] mbim_open: Open mbim driver
1007[ 21.140140] mbim_open: Lock mbim_dev->open_excl for open
1008[ 21.165465] mbim_open: USB cable not connected
1009[ 21.168881] mbim_open: Exit, mbim file opened