· 6 years ago · Nov 24, 2019, 11:08 AM
1[ 0.000000] Booting Linux on physical CPU 0x0
2[ 0.000000] Linux version 4.9.169-perf+ (pranav@amdtr) (Android (4691093 based on r316199) clang version 6.0.2 (https://android.googlesource.com/toolchain/clang 183abd29fc496f55536e7d904e0abae47888fc7f) (https://android.googlesource.com/toolchain/llvm 34361f192e41ed6e4e8f9aca80a4ea7e9856f327) (based on LLVM 6.0.2svn)) #1 SMP PREEMPT Sat Apr 20 18:26:42 IST 2019
3[ 0.000000] Boot CPU: AArch64 Processor [410fd034]
4[ 0.000000] Machine: Qualcomm Technologies, Inc. MSM8953 + PMI8950 QRD SKU3
5[ 0.000000] core_ctl: disable_cpumask=0-7
6[ 0.000000] efi: Getting EFI parameters from FDT:
7[ 0.000000] efi: UEFI not found.
8[ 0.000000] Reserved memory: created CMA memory pool at 0x000000008f800000, size 8 MiB
9[ 0.000000] OF: reserved mem: initialized node venus_region@0, compatible id shared-dma-pool
10[ 0.000000] Reserved memory: created CMA memory pool at 0x00000000ffc00000, size 4 MiB
11[ 0.000000] OF: reserved mem: initialized node adsp_region@0, compatible id shared-dma-pool
12[ 0.000000] Reserved memory: created CMA memory pool at 0x00000000f4800000, size 180 MiB
13[ 0.000000] OF: reserved mem: initialized node secure_region@0, compatible id shared-dma-pool
14[ 0.000000] OF: reserved mem: invalid size property in 'mem_dump_region' node.
15[ 0.000000] Reserved memory: created CMA memory pool at 0x000000008f000000, size 8 MiB
16[ 0.000000] OF: reserved mem: initialized node gpu_region@0, compatible id shared-dma-pool
17[ 0.000000] Reserved memory: created CMA memory pool at 0x00000000f3800000, size 16 MiB
18[ 0.000000] OF: reserved mem: initialized node qseecom_region@0, compatible id shared-dma-pool
19[ 0.000000] Reserved memory: created CMA memory pool at 0x00000000f3400000, size 4 MiB
20[ 0.000000] OF: reserved mem: initialized node qseecom_ta_region, compatible id shared-dma-pool
21[ 0.000000] Removed memory: created DMA memory pool at 0x0000000084a00000, size 30 MiB
22[ 0.000000] OF: reserved mem: initialized node other_ext_region@0, compatible id removed-dma-pool
23[ 0.000000] Removed memory: created DMA memory pool at 0x0000000086c00000, size 106 MiB
24[ 0.000000] OF: reserved mem: initialized node modem_region@0, compatible id removed-dma-pool
25[ 0.000000] Removed memory: created DMA memory pool at 0x000000008d600000, size 18 MiB
26[ 0.000000] OF: reserved mem: initialized node adsp_fw_region@0, compatible id removed-dma-pool
27[ 0.000000] Removed memory: created DMA memory pool at 0x000000008e800000, size 7 MiB
28[ 0.000000] OF: reserved mem: initialized node wcnss_fw_region@0, compatible id removed-dma-pool
29[ 0.000000] Removed memory: created DMA memory pool at 0x000000009ff00000, size 1 MiB
30[ 0.000000] OF: reserved mem: initialized node pstore_reserve_mem_region@0, compatible id removed-dma-pool
31[ 0.000000] cma: Reserved 16 MiB at 0x00000000f2400000
32[ 0.000000] On node 0 totalpages: 941568
33[ 0.000000] DMA zone: 15360 pages used for memmap
34[ 0.000000] DMA zone: 0 pages reserved
35[ 0.000000] DMA zone: 941568 pages, LIFO batch:31
36[ 0.000000] psci: probing for conduit method from DT.
37[ 0.000000] psci: PSCIv1.0 detected in firmware.
38[ 0.000000] psci: Using standard PSCI v0.2 function IDs
39[ 0.000000] psci: MIGRATE_INFO_TYPE not supported.
40[ 0.000000] psci: SMC Calling Convention v1.0
41[ 0.000000] Did not receive the expected number of bytes from PRNG: 0
42[ 0.000000] percpu: Embedded 23 pages/cpu @ffffffc0f2145000 s55960 r8192 d30056 u94208
43[ 0.000000] pcpu-alloc: s55960 r8192 d30056 u94208 alloc=23*4096
44[ 0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 [0] 4 [0] 5 [0] 6 [0] 7
45[ 0.000000] CPU features: enabling workaround for ARM erratum 845719
46[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 926208
47[ 0.000000] Kernel command line: core_ctl_disable_cpumask=0-7 kpti=0 androidboot.hardware=qcom msm_rtb.filter=0x237 ehci-hcd.park=3 lpm_levels.sleep_disabled=1 androidboot.bootdevice=7824900.sdhci earlycon=msm_hsl_uart,0x78af000 androidboot.selinux=permissive buildvariant=eng androidboot.emmc=true androidboot.verifiedbootstate=orange androidboot.veritymode=eio androidboot.keymaster=1 androidboot.serialno=00de3f190904 androidboot.secureboot=1 androidboot.bootloader=MSM8953_TISSOT2.0_20190422143927 androidboot.baseband=msm mdss_mdp.panel=1:dsi:0:qcom,mdss_dsi_ili7807_fhd_video:1:none:cfg:single_dsi androidboot.slot_suffix=_a skip_initramfs rootwait ro init=/init root=/dev/dm-0 dm="system none ro,0 1 android-verity /dev/mmcblk0p25"
48[ 0.000000] device-mapper: init: will configure 1 devices
49[ 0.000000] log_buf_len individual max cpu contribution: 131072 bytes
50[ 0.000000] log_buf_len total cpu_extra contributions: 917504 bytes
51[ 0.000000] log_buf_len min size: 131072 bytes
52[ 0.000000] log_buf_len: 1048576 bytes
53[ 0.000000] early log buf free: 126152(96%)
54[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
55[ 0.000000] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
56[ 0.000000] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
57[ 0.000000] Memory: 3371148K/3766272K available (17916K kernel code, 2860K rwdata, 7300K rodata, 6144K init, 2947K bss, 153460K reserved, 241664K cma-reserved)
58[ 0.000000] Virtual kernel memory layout:
59[ 0.000000] modules : 0xffffff8000000000 - 0xffffff8008000000 ( 128 MB)
60[ 0.000000] vmalloc : 0xffffff8008000000 - 0xffffffbebfff0000 ( 250 GB)
61[ 0.000000] .text : 0xffffff8008080000 - 0xffffff8009200000 ( 17920 KB)
62[ 0.000000] .rodata : 0xffffff8009200000 - 0xffffff8009a00000 ( 8192 KB)
63[ 0.000000] .init : 0xffffff8009a00000 - 0xffffff800a000000 ( 6144 KB)
64[ 0.000000] .data : 0xffffff800a000000 - 0xffffff800a2cb200 ( 2861 KB)
65[ 0.000000] .bss : 0xffffff800a2cb200 - 0xffffff800a5abec4 ( 2948 KB)
66[ 0.000000] fixed : 0xffffffbefe7fb000 - 0xffffffbefec00000 ( 4116 KB)
67[ 0.000000] PCI I/O : 0xffffffbefee00000 - 0xffffffbeffe00000 ( 16 MB)
68[ 0.000000] vmemmap : 0xffffffbf00000000 - 0xffffffc000000000 ( 4 GB maximum)
69[ 0.000000] 0xffffffbf00400000 - 0xffffffbf04000000 ( 60 MB actual)
70[ 0.000000] memory : 0xffffffc010000000 - 0xffffffc100000000 ( 3840 MB)
71[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
72[ 0.000000] Preemptible hierarchical RCU implementation.
73[ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
74[ 0.000000] NR_IRQS:64 nr_irqs:64 0
75[ 0.000000] Offload RCU callbacks from all CPUs
76[ 0.000000] Offload RCU callbacks from CPUs: 0-7.
77[ 0.000000] arm_arch_timer: Architected cp15 and mmio timer(s) running at 19.20MHz (virt/virt).
78[ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x46d987e47, max_idle_ns: 440795202767 ns
79[ 0.000005] sched_clock: 56 bits at 19MHz, resolution 52ns, wraps every 4398046511078ns
80[ 0.000022] clocksource: Switched to clocksource arch_sys_counter
81[ 0.000994] Calibrating delay loop (skipped), value calculated using timer frequency.. 38.00 BogoMIPS (lpj=64000)
82[ 0.001008] pid_max: default: 32768 minimum: 301
83[ 0.001084] Security Framework initialized
84[ 0.001095] SELinux: Initializing.
85[ 0.001146] SELinux: Starting in permissive mode
86[ 0.001179] Mount-cache hash table entries: 8192 (order: 4, 65536 bytes)
87[ 0.001189] Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes)
88[ 0.002350] /cpus/cpu@0: Missing clock-frequency property
89[ 0.002363] /cpus/cpu@1: Missing clock-frequency property
90[ 0.002373] /cpus/cpu@2: Missing clock-frequency property
91[ 0.002384] /cpus/cpu@3: Missing clock-frequency property
92[ 0.002396] /cpus/cpu@100: Missing clock-frequency property
93[ 0.002409] /cpus/cpu@101: Missing clock-frequency property
94[ 0.002492] /cpus/cpu@102: Missing clock-frequency property
95[ 0.002508] /cpus/cpu@103: Missing clock-frequency property
96[ 0.002611] sched-energy: Sched-energy-costs installed from DT
97[ 0.002626] ASID allocator initialised with 32768 entries
98[ 0.013475] cpu_clock_pwr_init: Power clocks configured
99[ 0.016038] MSM Memory Dump base table set up
100[ 0.016063] MSM Memory Dump apps data table set up
101[ 0.016233] EFI services will not be available.
102[ 0.025046] CPU1: Booted secondary processor [410fd034]
103[ 0.033391] CPU2: Booted secondary processor [410fd034]
104[ 0.041734] CPU3: Booted secondary processor [410fd034]
105[ 0.050160] CPU4: Booted secondary processor [410fd034]
106[ 0.058568] CPU5: Booted secondary processor [410fd034]
107[ 0.067006] CPU6: Booted secondary processor [410fd034]
108[ 0.075403] CPU7: Booted secondary processor [410fd034]
109[ 0.075680] Brought up 8 CPUs
110[ 0.075712] SMP: Total of 8 processors activated.
111[ 0.075723] CPU features: detected feature: 32-bit EL0 Support
112[ 0.075731] CPU features: kernel page table isolation forced OFF by command line option
113[ 0.075743] CPU: All CPU(s) started at EL1
114[ 0.075820] alternatives: patching kernel code
115[ 0.076187] CPU7: update max cpu_capacity 1024
116[ 0.137823] CPU1: update max cpu_capacity 1024
117[ 0.138527] DMI not present or invalid.
118[ 0.138911] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 6370867519511994 ns
119[ 0.138931] futex hash table entries: 2048 (order: 6, 262144 bytes)
120[ 0.149096] pinctrl core: initialized pinctrl subsystem
121[ 0.149973] NET: Registered protocol family 16
122[ 0.152017] schedtune: init normalization constants...
123[ 0.152034] schedtune: CLUSTER[0-3] min_pwr: 1 max_pwr: 180
124[ 0.152044] schedtune: CPU[0] min_pwr: 1 max_pwr: 65
125[ 0.152053] schedtune: CPU[1] min_pwr: 1 max_pwr: 65
126[ 0.152062] schedtune: CPU[2] min_pwr: 1 max_pwr: 65
127[ 0.152071] schedtune: CPU[3] min_pwr: 1 max_pwr: 65
128[ 0.152080] schedtune: CLUSTER[4-7] min_pwr: 1 max_pwr: 175
129[ 0.152089] schedtune: CPU[4] min_pwr: 1 max_pwr: 65
130[ 0.152097] schedtune: CPU[5] min_pwr: 1 max_pwr: 65
131[ 0.152106] schedtune: CPU[6] min_pwr: 1 max_pwr: 65
132[ 0.152114] schedtune: CPU[7] min_pwr: 1 max_pwr: 65
133[ 0.152122] schedtune: SYSTEM min_pwr: 10 max_pwr: 875
134[ 0.152131] schedtune: using normalization constants mul: 789479538 sh1: 1 sh2: 9
135[ 0.152137] schedtune: verify normalization constants...
136[ 0.152145] schedtune: max_pwr/2^0: 865 => norm_pwr: 1024
137[ 0.152152] schedtune: max_pwr/2^1: 432 => norm_pwr: 511
138[ 0.152159] schedtune: max_pwr/2^2: 216 => norm_pwr: 255
139[ 0.152167] schedtune: max_pwr/2^3: 108 => norm_pwr: 127
140[ 0.152175] schedtune: max_pwr/2^4: 54 => norm_pwr: 63
141[ 0.152183] schedtune: max_pwr/2^5: 27 => norm_pwr: 31
142[ 0.152190] schedtune: configured to support 5 boost groups
143[ 0.152463] ramoops: using module parameters
144[ 0.156305] pstore: using zlib compression
145[ 0.157066] console [pstore0] enabled
146[ 0.157186] pstore: Registered ramoops as persistent store backend
147[ 0.157198] ramoops: attached 0x100000@0x9ff00000, ecc: 0/0
148[ 0.158061] cpuidle: using governor menu
149[ 0.159289] cpuidle: using governor qcom
150[ 0.163213] vdso: 2 pages (1 code @ ffffff8009208000, 1 data @ ffffff800a004000)
151[ 0.163231] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers.
152[ 0.164349] DMA: preallocated 256 KiB pool for atomic allocations
153[ 0.169390] smd_channel_probe_now: allocation table not initialized
154[ 0.170272] smd_channel_probe_now: allocation table not initialized
155[ 0.170752] smd_channel_probe_now: allocation table not initialized
156[ 0.171469] msm_rpm_glink_dt_parse: qcom,rpm-glink compatible not matches
157[ 0.172099] pm8953_s1: Bringing 1uV into 16-16uV
158[ 0.172664] pm8953_s2_level: Bringing 1uV into 16-16uV
159[ 0.173039] pm8953_s2_floor_level: Bringing 1uV into 16-16uV
160[ 0.173977] pm8953_s2_level_ao: Bringing 1uV into 16-16uV
161[ 0.175992] pm8953_s7_level_ao: Bringing 1uV into 16-16uV
162[ 0.185839] pm8953_l23: Bringing 120000uV into 1200000-1200000uV
163[ 0.186621] qcom,gcc-8953 1800000.qcom,gcc: Venus speed bin: 2
164[ 0.204929] qcom,gcc-8953 1800000.qcom,gcc: Registered GCC clocks
165[ 0.205418] msm8953-pinctrl 1000000.pinctrl: invalid resource
166[ 0.215822] platform soc:qcom,kgsl-hyp: assigned reserved memory node gpu_region@0
167[ 0.223154] sps:sps is ready.
168[ 0.226731] cpu-clock-8953 b114000.qcom,cpu-clock-8953: Speed bin: 2 PVS Version: 0
169[ 0.226833] cpu-clock-8953 b114000.qcom,cpu-clock-8953: Get vdd-pwrcl regulator!!!
170[ 0.228424] msm_watchdog b017000.qcom,wdt: wdog absent resource not present
171[ 0.229645] msm_watchdog b017000.qcom,wdt: MSM Watchdog Initialized
172[ 0.231906] platform soc:qcom,msm-adsprpc-mem: assigned reserved memory node adsp_region@0
173[ 0.232856] spmi spmi-0: PMIC arbiter version v2 (0x20010000)
174[ 0.233653] platform 4080000.qcom,mss: assigned reserved memory node modem_region@0
175[ 0.233878] platform c200000.qcom,lpass: assigned reserved memory node adsp_fw_region@0
176[ 0.234096] platform a21b000.qcom,pronto: assigned reserved memory node wcnss_fw_region@0
177[ 0.234244] platform 1de0000.qcom,venus: assigned reserved memory node venus_region@0
178[ 0.235108] apc_mem_acc_corner: Bringing 0uV into 1-1uV
179[ 0.235955] gfx_mem_acc_corner: Bringing 0uV into 1-1uV
180[ 0.236441] GFX_LDO: msm_gfx_ldo_voltage_init: LDO corner 1: target-volt = 580000 uV
181[ 0.236452] GFX_LDO: msm_gfx_ldo_voltage_init: LDO corner 2: target-volt = 650000 uV
182[ 0.236462] GFX_LDO: msm_gfx_ldo_voltage_init: LDO corner 3: target-volt = 720000 uV
183[ 0.236476] GFX_LDO: msm_gfx_ldo_adjust_init_voltage: adjusted the open-loop voltage[1] 580000 -> 615000
184[ 0.236486] GFX_LDO: msm_gfx_ldo_adjust_init_voltage: adjusted the open-loop voltage[2] 650000 -> 675000
185[ 0.236496] GFX_LDO: msm_gfx_ldo_voltage_init: LDO-mode fuse disabled by default
186[ 0.237373] pm8953_s5_avs_limit: Bringing 0uV into 400000-400000uV
187[ 0.237586] spm_regulator_probe: name=pm8953_s5, range=LV, voltage=870000 uV, mode=AUTO, step rate=1200 uV/us
188[ 0.271392] mdss_pll_probe: MDSS pll label = MDSS DSI 0 PLL
189[ 0.271408] mdss_pll_probe: mdss_pll_probe: label=MDSS DSI 0 PLL PLL SSC enabled
190[ 0.271435] mdss_pll_util_parse_dt_supply: : error reading ulp load. rc=-22
191[ 0.272026] dsi_pll_clock_register_8996: Registered DSI PLL ndx=0 clocks successfully
192[ 0.272066] mdss_pll_probe: MDSS pll label = MDSS DSI 1 PLL
193[ 0.272077] mdss_pll_probe: mdss_pll_probe: label=MDSS DSI 1 PLL PLL SSC enabled
194[ 0.272101] mdss_pll_util_parse_dt_supply: : error reading ulp load. rc=-22
195[ 0.273203] pll_is_pll_locked_8996: DSI PLL ndx=1 status=0 failed to Lock
196[ 0.273723] dsi_pll_clock_register_8996: Registered DSI PLL ndx=1 clocks successfully
197[ 0.276670] KPI: Bootloader start count = 25082
198[ 0.276682] KPI: Bootloader end count = 511128
199[ 0.276740] KPI: Bootloader display count = 74833
200[ 0.276748] KPI: Bootloader load kernel count = 1093
201[ 0.276757] KPI: Kernel MPM timestamp = 529711
202[ 0.276764] KPI: Kernel MPM Clock frequency = 32768
203[ 0.276789] socinfo_print: v0.10, id=293, ver=1.1, raw_id=70, raw_ver=1, hw_plat=11, hw_plat_ver=65536
204[ 0.276789] accessory_chip=0, hw_plat_subtype=0, pmic_model=65558, pmic_die_revision=65536 foundry_id=3 serial_number=2208420767
205[ 0.279168] arm-smmu 1c40000.arm,smmu-kgsl: Couldn't get clock: gpu_ahb_clk
206[ 0.279614] arm-smmu 1e00000.qcom,iommu: (IDR0.CTTW overridden by dma-coherent property)
207[ 0.279630] arm-smmu 1e00000.qcom,iommu: stream matching with 122 register groups, mask 0x7fff
208[ 0.279748] arm-smmu 1e00000.qcom,iommu: found 32 context interrupt(s) but have 30 context banks. assuming 30 context interrupts.
209[ 0.280772] iommu: Adding device soc:qcom,msm-audio-ion to group 0
210[ 0.284758] SCSI subsystem initialized
211[ 0.284970] usbcore: registered new interface driver usbfs
212[ 0.285023] usbcore: registered new interface driver hub
213[ 0.285242] usbcore: registered new device driver usb
214[ 0.286497] qcom,qpnp-power-on 200f000.qcom,spmi:qcom,pm8953@0:qcom,power-on@800: PMIC@SID0 Power-on reason: Triggered from Hard Reset and 'warm' boot
215[ 0.286526] qcom,qpnp-power-on 200f000.qcom,spmi:qcom,pm8953@0:qcom,power-on@800: PMIC@SID0: Power-off reason: Triggered from PS_HOLD (PS_HOLD/MSM controlled shutdown)
216[ 0.286835] input: qpnp_pon as /devices/virtual/input/input0
217[ 0.288094] qcom,qpnp-power-on 200f000.qcom,spmi:qcom,pmi8950@2:qcom,power-on@800: No PON config. specified
218[ 0.288157] qcom,qpnp-power-on 200f000.qcom,spmi:qcom,pmi8950@2:qcom,power-on@800: PMIC@SID2 Power-on reason: Triggered from PON1 (secondary PMIC) and 'warm' boot
219[ 0.288181] qcom,qpnp-power-on 200f000.qcom,spmi:qcom,pmi8950@2:qcom,power-on@800: PMIC@SID2: Power-off reason: Triggered from PS_HOLD (PS_HOLD/MSM controlled shutdown)
220[ 0.288862] i2c-msm-v2 78b6000.i2c: probing driver i2c-msm-v2
221[ 0.288938] AXI: msm_bus_scale_register_client(): msm_bus_scale_register_client: Bus driver not ready.
222[ 0.288951] i2c-msm-v2 78b6000.i2c: msm_bus_scale_register_client(mstr-id:86):0 (not a problem)
223[ 0.289200] AXI: msm_bus_scale_register_client(): msm_bus_scale_register_client: Bus driver not ready.
224[ 0.289623] i2c-msm-v2 78b7000.i2c: probing driver i2c-msm-v2
225[ 0.289679] AXI: msm_bus_scale_register_client(): msm_bus_scale_register_client: Bus driver not ready.
226[ 0.289691] i2c-msm-v2 78b7000.i2c: msm_bus_scale_register_client(mstr-id:86):0 (not a problem)
227[ 0.289822] i2c-msm-v2 78b7000.i2c: irq:71 when no active transfer
228[ 0.289916] AXI: msm_bus_scale_register_client(): msm_bus_scale_register_client: Bus driver not ready.
229[ 0.290455] i2c-msm-v2 7af5000.i2c: probing driver i2c-msm-v2
230[ 0.290505] AXI: msm_bus_scale_register_client(): msm_bus_scale_register_client: Bus driver not ready.
231[ 0.290517] i2c-msm-v2 7af5000.i2c: msm_bus_scale_register_client(mstr-id:84):0 (not a problem)
232[ 0.290751] AXI: msm_bus_scale_register_client(): msm_bus_scale_register_client: Bus driver not ready.
233[ 0.291302] media: Linux media interface: v0.10
234[ 0.291350] Linux video capture interface: v2.00
235[ 0.305380] EDAC MC: Ver: 3.0.0
236[ 0.307112] Unable to get pmic_revid rc=-22
237[ 0.307244] dmi: Firmware registration failed.
238[ 0.308427] platform soc:qcom,ion:qcom,ion-heap@8: assigned reserved memory node secure_region@0
239[ 0.308586] platform soc:qcom,ion:qcom,ion-heap@27: assigned reserved memory node qseecom_region@0
240[ 0.308733] platform soc:qcom,ion:qcom,ion-heap@19: assigned reserved memory node qseecom_ta_region
241[ 0.308982] ION heap system created
242[ 0.309283] ION heap mm created at 0x00000000f4800000 with size b400000
243[ 0.309325] ION heap qsecom created at 0x00000000f3800000 with size 1000000
244[ 0.309342] ION heap qsecom_ta created at 0x00000000f3400000 with size 400000
245[ 0.310798] AXI: msm_bus_scale_register_client(): msm_bus_scale_register_client: Bus driver not ready.
246[ 0.310809] ipa ipa_init:4016 fail to register with bus mgr!
247[ 0.310908] ipa ipa_plat_drv_probe:5046 ipa_init failed
248[ 0.311782] PMIC@SID0: PM8953 v1.0 options: 2, 2, 0, 0
249[ 0.311943] PMIC@SID2: PMI8937 v2.0 options: 0, 0, 0, 0
250[ 0.314447] Advanced Linux Sound Architecture Driver Initialized.
251[ 0.315024] Bluetooth: Core ver 2.22
252[ 0.315059] NET: Registered protocol family 31
253[ 0.315067] Bluetooth: HCI device and connection manager initialized
254[ 0.315081] Bluetooth: HCI socket layer initialized
255[ 0.315094] Bluetooth: L2CAP socket layer initialized
256[ 0.315681] NetLabel: Initializing
257[ 0.315690] NetLabel: domain hash size = 128
258[ 0.315697] NetLabel: protocols = UNLABELED CIPSOv4
259[ 0.315753] NetLabel: unlabeled traffic allowed by default
260[ 0.316289] gcc_oxili_gfx3d_clk: set OPP pair(19200000 Hz: 615000 uV) on 1c00000.qcom,kgsl-3d0
261[ 0.316661] gcc_oxili_gfx3d_clk: set OPP pair(200000000 Hz: 675000 uV) on 1c00000.qcom,kgsl-3d0
262[ 0.317213] gcc_oxili_gfx3d_clk: set OPP pair(650000000 Hz: 0 uV) on 1c00000.qcom,kgsl-3d0
263[ 0.317587] gcc-gfx-8953 1800000.qcom,gcc-gfx: Registered GCC GFX clocks.
264[ 0.317701] cpu-clock-8953 b114000.qcom,cpu-clock-8953: Speed bin: 2 PVS Version: 0
265[ 0.317809] cpu-clock-8953 b114000.qcom,cpu-clock-8953: Get vdd-pwrcl regulator!!!
266[ 0.318372] cpr4_apss_read_fuse_data: apc_corner: speed bin = 2, CPR fusing revision = 3, foundry id = 2
267[ 0.318385] cpr4_msm8953_apss_read_fuse_data: apc_corner: CPR misc fuse value = 0
268[ 0.318420] cpr4_msm8953_apss_read_fuse_data: apc_corner: Voltage boost fuse config = 0 boost = disable
269[ 0.318528] cpr4_apss_calculate_open_loop_voltages: apc_corner: fused LowSVS: open-loop= 625000 uV
270[ 0.318538] cpr4_apss_calculate_open_loop_voltages: apc_corner: fused SVS: open-loop= 680000 uV
271[ 0.318547] cpr4_apss_calculate_open_loop_voltages: apc_corner: fused NOM: open-loop= 815000 uV
272[ 0.318556] cpr4_apss_calculate_open_loop_voltages: apc_corner: fused TURBO_L1: open-loop= 915000 uV
273[ 0.318613] cpr4_apss_calculate_target_quotients: apc_corner: fused LowSVS: quot[ 7]= 469
274[ 0.318624] cpr4_apss_calculate_target_quotients: apc_corner: fused SVS: quot[ 7]= 557, quot_offset[ 7]= 85
275[ 0.318635] cpr4_apss_calculate_target_quotients: apc_corner: fused NOM: quot[ 7]= 834, quot_offset[ 7]= 275
276[ 0.318645] cpr4_apss_calculate_target_quotients: apc_corner: fused TURBO_L1: quot[ 7]=1029, quot_offset[ 7]= 195
277[ 0.318828] cpr4_apss_init_aging: apc: sensor 6 aging init quotient diff = 11, aging RO scale = 2800 QUOT/V
278[ 0.318966] cpr3_regulator_init_ctrl: apc: Default CPR mode = HW closed-loop
279[ 0.320789] qpnp_labibb_regulator_probe: LAB/IBB registered successfully, lab_vreg enable=1 ibb_vreg enable=1 swire_control=0
280[ 0.321087] gdsc_oxili_gx: supplied by msm_gfx_ldo
281[ 0.322278] arm-smmu 1c40000.arm,smmu-kgsl: (IDR0.CTTW overridden by dma-coherent property)
282[ 0.322294] arm-smmu 1c40000.arm,smmu-kgsl: stream matching with 4 register groups, mask 0x7fff
283[ 0.326234] AXI: msm_bus_scale_register_client(): msm_bus_scale_register_client: Bus driver not ready.
284[ 0.326246] ipa ipa_init:4016 fail to register with bus mgr!
285[ 0.326325] ipa ipa_plat_drv_probe:5046 ipa_init failed
286[ 0.326435] cpu-clock-8953 b114000.qcom,cpu-clock-8953: Speed bin: 2 PVS Version: 0
287[ 0.328167] cpu-clock-8953 b114000.qcom,cpu-clock-8953: missing qcom,dfs-sid-c0
288[ 0.328181] cpu-clock-8953 b114000.qcom,cpu-clock-8953: No DFS SID tables found for Cluster-0
289[ 0.328193] cpu-clock-8953 b114000.qcom,cpu-clock-8953: missing qcom,link-sid-c0
290[ 0.328204] cpu-clock-8953 b114000.qcom,cpu-clock-8953: No Link SID tables found for Cluster-0
291[ 0.328216] cpu-clock-8953 b114000.qcom,cpu-clock-8953: missing qcom,lmh-sid-c0
292[ 0.328227] cpu-clock-8953 b114000.qcom,cpu-clock-8953: No LMH SID tables found for Cluster-0
293[ 0.328235] ramp_lmh_sid: Use Default LMH SID
294[ 0.328243] ramp_dfs_sid: Use Default DFS SID
295[ 0.328250] ramp_link_sid: Use Default Link SID
296[ 0.328299] cpu-clock-8953 b114000.qcom,cpu-clock-8953: missing qcom,dfs-sid-c1
297[ 0.328310] cpu-clock-8953 b114000.qcom,cpu-clock-8953: No DFS SID tables found for Cluster-1
298[ 0.328322] cpu-clock-8953 b114000.qcom,cpu-clock-8953: missing qcom,link-sid-c1
299[ 0.328332] cpu-clock-8953 b114000.qcom,cpu-clock-8953: No Link SID tables found for Cluster-1
300[ 0.328344] cpu-clock-8953 b114000.qcom,cpu-clock-8953: missing qcom,lmh-sid-c1
301[ 0.328354] cpu-clock-8953 b114000.qcom,cpu-clock-8953: No LMH SID tables found for Cluster-1
302[ 0.328362] ramp_lmh_sid: Use Default LMH SID
303[ 0.328368] ramp_dfs_sid: Use Default DFS SID
304[ 0.328375] ramp_link_sid: Use Default Link SID
305[ 0.328428] clock_rcgwr_init: RCGwR Init Completed
306[ 0.331955] populate_opp_table: clock-cpu-8953: OPP tables populated (cpu 3 and 7)
307[ 0.331969] print_opp_table: clock_cpu: a53 C0: OPP voltage for 652800000: 1
308[ 0.331977] print_opp_table: clock_cpu: a53 C0: OPP voltage for 2016000000: 7
309[ 0.331985] print_opp_table: clock_cpu: a53 C1: OPP voltage for 652800000: 1
310[ 0.331993] print_opp_table: clock_cpu: a53 C2: OPP voltage for 2016000000: 7
311[ 0.332209] sched-energy energy-costs: cpu=0 eff=1024 [freq=652800 cap=302 power_d0=5] -> [freq=2400000 cap=932 power_d0=65]
312[ 0.332218] CPU0: update cpu_capacity 932
313[ 0.332231] sched-energy energy-costs: cpu=1 eff=1024 [freq=652800 cap=302 power_d0=5] -> [freq=2400000 cap=932 power_d0=65]
314[ 0.332239] CPU1: update cpu_capacity 932
315[ 0.332252] sched-energy energy-costs: cpu=2 eff=1024 [freq=652800 cap=302 power_d0=5] -> [freq=2400000 cap=932 power_d0=65]
316[ 0.332259] CPU2: update cpu_capacity 932
317[ 0.332272] sched-energy energy-costs: cpu=3 eff=1024 [freq=652800 cap=302 power_d0=5] -> [freq=2400000 cap=932 power_d0=65]
318[ 0.332280] CPU3: update cpu_capacity 932
319[ 0.332293] sched-energy energy-costs: cpu=4 eff=1126 [freq=652800 cap=332 power_d0=5] -> [freq=2400000 cap=1024 power_d0=65]
320[ 0.332300] CPU4: update cpu_capacity 1024
321[ 0.332313] sched-energy energy-costs: cpu=5 eff=1126 [freq=652800 cap=332 power_d0=5] -> [freq=2400000 cap=1024 power_d0=65]
322[ 0.332321] CPU5: update cpu_capacity 1024
323[ 0.332334] sched-energy energy-costs: cpu=6 eff=1126 [freq=652800 cap=332 power_d0=5] -> [freq=2400000 cap=1024 power_d0=65]
324[ 0.332341] CPU6: update cpu_capacity 1024
325[ 0.332354] sched-energy energy-costs: cpu=7 eff=1126 [freq=652800 cap=332 power_d0=5] -> [freq=2400000 cap=1024 power_d0=65]
326[ 0.332362] CPU7: update cpu_capacity 1024
327[ 0.333790] sched-energy energy-costs: Sched-energy-costs capacity updated
328[ 0.336198] cpufreq: driver msm up and running
329[ 0.336404] AXI: msm_bus_scale_register_client(): msm_bus_scale_register_client: Bus driver not ready.
330[ 0.336409] ipa ipa_init:4016 fail to register with bus mgr!
331[ 0.336449] ipa ipa_plat_drv_probe:5046 ipa_init failed
332[ 0.336731] CPU5: update max cpu_capacity 1024
333[ 0.336747] clocksource: Switched to clocksource arch_sys_counter
334[ 0.366591] VFS: Disk quotas dquot_6.6.0
335[ 0.366634] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
336[ 0.366706] msm_bus_fabric_init_driver
337[ 0.370715] msm_bus_device 580000.ad-hoc-bus: Bus scaling driver probe successful
338[ 0.371707] NET: Registered protocol family 2
339[ 0.372011] TCP established hash table entries: 32768 (order: 6, 262144 bytes)
340[ 0.372139] TCP bind hash table entries: 32768 (order: 7, 524288 bytes)
341[ 0.372516] TCP: Hash tables configured (established 32768 bind 32768)
342[ 0.372556] UDP hash table entries: 2048 (order: 4, 65536 bytes)
343[ 0.372597] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
344[ 0.372725] NET: Registered protocol family 1
345[ 0.373305] gcc-mdss-8953 1800000.qcom,gcc-mdss: Registered GCC MDSS clocks.
346[ 0.373832] ipa ipa2_uc_state_check:297 uC interface not initialized
347[ 0.373843] ipa ipa_sps_irq_control_all:963 EP (2) not allocated.
348[ 0.373848] ipa ipa_sps_irq_control_all:963 EP (5) not allocated.
349[ 0.376198] sps:BAM 0x0000000007904000 is registered.
350[ 0.377593] sps:BAM 0x0000000007904000 (va:0xffffff800abc0000) enabled: ver:0x27, number of pipes:20
351[ 0.386638] IPA driver initialization was successful.
352[ 0.386910] Trying to unpack rootfs image as initramfs...
353[ 0.834535] Freeing initrd memory: 19080K
354[ 0.835172] hw perfevents: enabled with armv8_pmuv3 PMU driver, 7 counters available
355[ 0.837865] audit: initializing netlink subsys (disabled)
356[ 0.837916] audit: type=2000 audit(0.836:1): initialized
357[ 0.838094] Initialise system trusted keyrings
358[ 0.838378] workingset: timestamp_bits=62 max_order=20 bucket_order=0
359[ 0.842186] [SDFAT] Filesystem version 2.1.8
360[ 0.842296] Registering sdcardfs 0.1
361[ 0.842446] fuse init (API version 7.26)
362[ 0.842812] SELinux: Registering netfilter hooks
363[ 0.842977] pfk_ext4 [pfk_ext4_init]: PFK EXT4 inited successfully
364[ 0.842982] pfk_f2fs [pfk_f2fs_init]: PFK F2FS inited successfully
365[ 0.842987] pfk [pfk_init]: Driver initialized successfully
366[ 0.845774] Key type asymmetric registered
367[ 0.845779] Asymmetric key parser 'x509' registered
368[ 0.845790] io scheduler noop registered
369[ 0.845898] io scheduler cfq registered (default)
370[ 0.852354] msm_mdss_get_res_byname: 'vbif_nrt_phys' resource not found
371[ 0.852367] mdss_mdp_probe+0x25c/0x3650->msm_mdss_ioremap_byname: 'vbif_nrt_phys' msm_mdss_get_res_byname failed
372[ 0.852528] mdss_mdp_irq_clk_register: unable to get clk: lut_clk
373[ 0.852539] mdss_mdp_irq_clk_register: unable to get clk: mnoc_clk
374[ 0.852835] No change in context(0==0), skip
375[ 0.853515] mdss_mdp_pipe_addr_setup: type:0 ftchid:-1 xinid:0 num:0 rect:0 ndx:0x1 prio:0
376[ 0.853531] mdss_mdp_pipe_addr_setup: type:1 ftchid:-1 xinid:1 num:3 rect:0 ndx:0x8 prio:1
377[ 0.853536] mdss_mdp_pipe_addr_setup: type:1 ftchid:-1 xinid:5 num:4 rect:0 ndx:0x10 prio:2
378[ 0.853550] mdss_mdp_pipe_addr_setup: type:2 ftchid:-1 xinid:2 num:6 rect:0 ndx:0x40 prio:3
379[ 0.853561] mdss_mdp_pipe_addr_setup: type:3 ftchid:-1 xinid:7 num:10 rect:0 ndx:0x400 prio:0
380[ 0.853570] mdss_mdp_parse_dt_handler: Error from prop qcom,mdss-pipe-sw-reset-off : u32 array read
381[ 0.853649] mdss_mdp_parse_dt_handler: Error from prop qcom,mdss-ib-factor-overlap : u32 array read
382[ 0.853656] mdss_mdp_parse_dt_handler: Error from prop qcom,mdss-bus-througput-factor : u32 array read
383[ 0.853837] xlog_status: enable:1, panic:1, dump:2
384[ 0.854055] iommu: Adding device 1a00000.qcom,mdss_mdp:qcom,smmu_mdp_unsec_cb to group 1
385[ 0.854185] iommu: Adding device 1a00000.qcom,mdss_mdp:qcom,smmu_mdp_sec_cb to group 2
386[ 0.854336] mdss_mdp_probe: mdss version = 0x10100000, bootloader display is on, num 1, intf_sel=0x00000100
387[ 0.855397] mdss_smmu_util_parse_dt_clock: clocks are not defined
388[ 0.855405] mdss_smmu_probe: iommu v2 domain[0] mapping and clk register successful!
389[ 0.855419] mdss_smmu_util_parse_dt_clock: clocks are not defined
390[ 0.855425] mdss_smmu_probe: iommu v2 domain[2] mapping and clk register successful!
391[ 0.855530] mdss_dsi_get_dt_vreg_data: error reading ulp load. rc=-22
392[ 0.855539] mdss_dsi_get_dt_vreg_data: error reading ulp load. rc=-22
393[ 0.855547] mdss_dsi_get_dt_vreg_data: error reading ulp load. rc=-22
394[ 0.856105] mdss_dsi_ctrl_probe: DSI Ctrl name = MDSS DSI CTRL->0
395[ 0.856191] mdss_dsi_find_panel_of_node: cmdline:0:qcom,mdss_dsi_ili7807_fhd_video:1:none:cfg:single_dsi panel_name:qcom,mdss_dsi_ili7807_fhd_video
396[ 0.856210] mdss_dsi_panel_init: Panel Name = ili7807 fhd video mode dsi panel
397[ 0.856301] mdss_dsi_panel_timing_from_dt: found new timing "qcom,mdss_dsi_ili7807_fhd_video" (ffffffc0e81c6400)
398[ 0.856314] mdss_dsi_parse_dcs_cmds: failed, key=qcom,mdss-dsi-post-panel-on-command
399[ 0.856320] mdss_dsi_parse_dcs_cmds: failed, key=qcom,mdss-dsi-timing-switch-command
400[ 0.856324] mdss_dsi_panel_get_dsc_cfg_np: cannot find dsc config node:
401[ 0.856384] mdss_dsi_parse_dcs_cmds: failed, key=qcom,mdss-dsi-idle-on-command
402[ 0.856390] mdss_dsi_parse_dcs_cmds: failed, key=qcom,mdss-dsi-idle-off-command
403[ 0.856406] mdss_dsi_parse_panel_features: ulps feature disabled
404[ 0.856411] mdss_dsi_parse_panel_features: ulps during suspend feature disabled
405[ 0.856417] mdss_dsi_parse_dms_config: dynamic switch feature enabled: 0
406[ 0.856429] mdss_dsi_parse_dcs_cmds: failed, key=qcom,mdss-dsi-lp-mode-on
407[ 0.856435] mdss_dsi_parse_dcs_cmds: failed, key=qcom,mdss-dsi-lp-mode-off
408[ 0.856463] mdss_dsi_get_dt_vreg_data: error reading ulp load. rc=-22
409[ 0.856471] mdss_dsi_get_dt_vreg_data: error reading ulp load. rc=-22
410[ 0.856477] mdss_dsi_get_dt_vreg_data: error reading ulp load. rc=-22
411[ 0.856485] mdss_dsi_get_dt_vreg_data: error reading ulp load. rc=-22
412[ 0.856509] 1a94000.qcom,mdss_dsi_ctrl0 supply vdd not found, using dummy regulator
413[ 0.856629] mdss_dsi_parse_ctrl_params:4223 Unable to read qcom,display-id, data=0000000000000000,len=20
414[ 0.856638] mdss_dsi_parse_gpio_params: bklt_en gpio not specified
415[ 0.856643] mdss_dsi_parse_gpio_params: ext vdd gpio not specified
416[ 0.856715] msm_mdss_get_res_byname: 'dsi_phy_regulator' resource not found
417[ 0.856726] mdss_dsi_retrieve_ctrl_resources+0x198/0x1fc->msm_mdss_ioremap_byname: 'dsi_phy_regulator' msm_mdss_get_res_byname failed
418[ 0.856731] mdss_dsi_retrieve_ctrl_resources: ctrl_base=ffffff800ab91000 ctrl_size=400 phy_base=ffffff800ab93400 phy_size=580
419[ 0.856829] dsi_panel_device_register: Continuous splash enabled
420[ 0.856890] mdss_register_panel: adding framebuffer device 1a94000.qcom,mdss_dsi_ctrl0
421[ 0.858062] mdss_dsi_ctrl_probe: Dsi Ctrl->0 initialized, DSI rev:0x10040002, PHY rev:0x2
422[ 0.858085] mdss_dsi_status_init: DSI status check interval:5000
423[ 0.858261] mdss_register_panel: adding framebuffer device soc:qcom,mdss_wb_panel
424[ 0.858660] mdss_fb_probe: fb0: split_mode:0 left:0 right:0
425[ 0.859010] mdss_fb_register: FrameBuffer[0] 1080x1920 registered successfully!
426[ 0.859187] mdss_fb_probe: fb1: split_mode:0 left:0 right:0
427[ 0.859241] mdss_fb_register: FrameBuffer[1] 640x640 registered successfully!
428[ 0.859290] mdss_mdp_splash_parse_dt: splash mem child node is not present
429[ 0.859399] qcom-sps-dma 7884000.qcom,sps-dma: dma_async_device_register: device has no channels!
430[ 0.859425] qcom-sps-dma 7ac4000.qcom,sps-dma: dma_async_device_register: device has no channels!
431[ 0.861692] scm_call failed: func id 0x42000c16, ret: -1, syscall returns: 0x0, 0x0, 0x0
432[ 0.861698] hyp_assign_table: Failed to assign memory protection, ret = -5
433[ 0.861703] memshare: hyp_assign_phys failed size=2097152 err=-5
434[ 0.861727] memshare_child soc:qcom,memshare:qcom,client_1: for memshare_GPS segments only will be dumped.
435[ 0.861780] memshare_child soc:qcom,memshare:qcom,client_2: for memshare_FTM segments only will be dumped.
436[ 0.863394] scm_call failed: func id 0x42000c16, ret: -1, syscall returns: 0x0, 0x0, 0x0
437[ 0.863399] hyp_assign_table: Failed to assign memory protection, ret = -5
438[ 0.863404] memshare: hyp_assign_phys failed size=5242880 err=-5
439[ 0.863412] memshare_child soc:qcom,memshare:qcom,client_3: for memshare_DIAG segments only will be dumped.
440[ 0.864485] minidump-id not found for a506_zap
441[ 0.864497] subsys-pil-tz soc:qcom,kgsl-hyp: for a506_zap segments only will be dumped.
442[ 0.864836] minidump-id not found for adsp
443[ 0.864916] minidump-id not found for wcnss
444[ 0.865072] minidump-id not found for venus
445[ 0.865082] subsys-pil-tz 1de0000.qcom,venus: for venus segments only will be dumped.
446[ 0.865872] minidump-id not found for modem
447[ 0.866765] wcnss: wcnss_wlan probed in built-in mode
448[ 0.867307] msm_serial_hs module loaded
449[ 0.868555] random: fast init done
450[ 0.868620] random: crng init done
451[ 0.873646] diag: In __diag_glink_init, unable to register for glink channel DIAG_CTRL
452[ 0.873796] diag: In __diag_glink_init, unable to register for glink channel DIAG_DATA
453[ 0.873896] diag: In __diag_glink_init, unable to register for glink channel DIAG_CMD
454[ 0.873982] diag: In __diag_glink_init, unable to register for glink channel DIAG_DCI_DATA
455[ 0.874064] diag: In __diag_glink_init, unable to register for glink channel DIAG_DCI_CMD
456[ 0.876740] iommu: Adding device 1c40000.qcom,kgsl-iommu:gfx3d_user to group 3
457[ 0.876906] platform 1c40000.qcom,kgsl-iommu:gfx3d_secure: assigned reserved memory node secure_region@0
458[ 0.877121] iommu: Adding device 1c40000.qcom,kgsl-iommu:gfx3d_secure to group 4
459[ 0.885326] brd: module loaded
460[ 0.888088] loop: module loaded
461[ 0.888380] zram: Added device: zram0
462[ 0.889224] QSEECOM: qseecom_probe: qseecom.qsee_version = 0x1001000
463[ 0.889245] QSEECOM: qseecom_retrieve_ce_data: Device does not support PFE
464[ 0.889251] QSEECOM: qseecom_probe: qseecom clocks handled by other subsystem
465[ 0.889256] QSEECOM: qseecom_probe: qsee reentrancy support phase is not defined, setting to default 0
466[ 0.889422] QSEECOM: qseecom_probe: qseecom.whitelist_support = 1
467[ 0.889595] i2c-msm-v2 7af5000.i2c: msm_bus_scale_register_client(mstr-id:84):0xc (ok)
468[ 0.889900] spmi spmi-0: error: impermissible write to peripheral sid:0 addr:0xc141
469[ 0.889907] qcom-spmi-gpio 200f000.qcom,spmi:qcom,pm8953@0:gpios: write 0x41 failed
470[ 0.889913] nq-nci 5-0028: nqx_probe: cannot set direction for nfc clkreq gpio [1275]
471[ 0.889923] nq-nci 5-0028: nqx_probe: probing nqxx failed, check hardware
472[ 0.891934] QCE50: __qce_get_device_tree_data: BAM Apps EE is not defined, setting to default 1
473[ 0.892196] qce 720000.qcedev: QTI Crypto 5.3.3 device found @0x720000
474[ 0.892204] qce 720000.qcedev: CE device = 0x0 IO base, CE = ffffff800b920000 Consumer (IN) PIPE 2,
475[ 0.892204] Producer (OUT) PIPE 3 IO base BAM = 0000000000000000
476[ 0.892204] BAM IRQ 65 Engines Availability = 0x2010853
477[ 0.892344] sps:BAM 0x0000000000704000 is registered.
478[ 0.892487] sps:BAM 0x0000000000704000 (va:0xffffff800bda0000) enabled: ver:0x27, number of pipes:8
479[ 0.892653] QCE50: qce_sps_init: QTI MSM CE-BAM at 0x0000000000704000 irq 65
480[ 0.897778] QCE50: __qce_get_device_tree_data: BAM Apps EE is not defined, setting to default 1
481[ 0.898047] qcrypto 720000.qcrypto: QTI Crypto 5.3.3 device found @0x720000
482[ 0.898055] qcrypto 720000.qcrypto: CE device = 0x0 IO base, CE = ffffff800bea0000 Consumer (IN) PIPE 4,
483[ 0.898055] Producer (OUT) PIPE 5 IO base BAM = 0000000000000000
484[ 0.898055] BAM IRQ 65 Engines Availability = 0x2010853
485[ 0.898264] QCE50: qce_sps_init: QTI MSM CE-BAM at 0x0000000000704000 irq 65
486[ 0.900599] qcrypto 720000.qcrypto: qcrypto-ecb-aes
487[ 0.900705] qcrypto 720000.qcrypto: qcrypto-cbc-aes
488[ 0.900789] qcrypto 720000.qcrypto: qcrypto-ctr-aes
489[ 0.900862] qcrypto 720000.qcrypto: qcrypto-ecb-des
490[ 0.900935] qcrypto 720000.qcrypto: qcrypto-cbc-des
491[ 0.901009] qcrypto 720000.qcrypto: qcrypto-ecb-3des
492[ 0.901082] qcrypto 720000.qcrypto: qcrypto-cbc-3des
493[ 0.901155] qcrypto 720000.qcrypto: qcrypto-xts-aes
494[ 0.901229] qcrypto 720000.qcrypto: qcrypto-sha1
495[ 0.901303] qcrypto 720000.qcrypto: qcrypto-sha256
496[ 0.901378] qcrypto 720000.qcrypto: qcrypto-aead-hmac-sha1-cbc-aes
497[ 0.901452] qcrypto 720000.qcrypto: qcrypto-aead-hmac-sha1-cbc-des
498[ 0.901529] qcrypto 720000.qcrypto: qcrypto-aead-hmac-sha1-cbc-3des
499[ 0.901603] qcrypto 720000.qcrypto: qcrypto-aead-hmac-sha256-cbc-aes
500[ 0.901676] qcrypto 720000.qcrypto: qcrypto-aead-hmac-sha256-cbc-des
501[ 0.901749] qcrypto 720000.qcrypto: qcrypto-aead-hmac-sha256-cbc-3des
502[ 0.901822] qcrypto 720000.qcrypto: qcrypto-hmac-sha1
503[ 0.901896] qcrypto 720000.qcrypto: qcrypto-hmac-sha256
504[ 0.901969] qcrypto 720000.qcrypto: qcrypto-aes-ccm
505[ 0.902043] qcrypto 720000.qcrypto: qcrypto-rfc4309-aes-ccm
506[ 0.902493] qcom_ice_get_device_tree_data: No vdd-hba-supply regulator, assuming not needed
507[ 0.902540] ICE IRQ = 76
508[ 0.902936] SCSI Media Changer driver v0.25
509[ 0.903683] sps: BAM device 0x0000000007ac4000 is not registered yet.
510[ 0.903806] sps:BAM 0x0000000007ac4000 is registered.
511[ 0.904172] sps:BAM 0x0000000007ac4000 (va:0xffffff800bd20000) enabled: ver:0x19, number of pipes:12
512[ 0.905198] libphy: Fixed MDIO Bus: probed
513[ 0.905202] tun: Universal TUN/TAP device driver, 1.6
514[ 0.905206] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
515[ 0.905246] PPP generic driver version 2.4.2
516[ 0.905293] PPP BSD Compression module registered
517[ 0.905297] PPP Deflate Compression module registered
518[ 0.905314] PPP MPPE Compression module registered
519[ 0.905318] NET: Registered protocol family 24
520[ 0.905417] usbcore: registered new interface driver asix
521[ 0.905461] usbcore: registered new interface driver ax88179_178a
522[ 0.905482] usbcore: registered new interface driver cdc_ether
523[ 0.905501] usbcore: registered new interface driver net1080
524[ 0.905519] usbcore: registered new interface driver cdc_subset
525[ 0.905538] usbcore: registered new interface driver zaurus
526[ 0.905563] usbcore: registered new interface driver cdc_ncm
527[ 0.905568] CHRDEV "uio" major number 233 goes below the dynamic allocation range
528[ 0.905856] msm_sharedmem: sharedmem_register_qmi: qmi init successful
529[ 0.906632] scm_call failed: func id 0x42000c16, ret: -1, syscall returns: 0x0, 0x0, 0x0
530[ 0.906637] hyp_assign_table: Failed to assign memory protection, ret = -5
531[ 0.906644] msm_sharedmem: setup_shared_ram_perms: hyp_assign_phys failed IPA=0x0160x00000000f2f00000 size=1572864 err=-5
532[ 0.906724] msm_sharedmem: msm_sharedmem_probe: Device created for client 'rmtfs'
533[ 0.909034] msm-dwc3 7000000.ssusb: unable to get dbm device
534[ 0.909537] CHRDEV "usbmon" major number 232 goes below the dynamic allocation range
535[ 0.909583] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
536[ 0.909588] ehci-platform: EHCI generic platform driver
537[ 0.909803] ehci-msm: Qualcomm On-Chip EHCI Host Controller
538[ 0.910311] usbcore: registered new interface driver cdc_acm
539[ 0.910315] cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters
540[ 0.910343] usbcore: registered new interface driver usb-storage
541[ 0.910362] usbcore: registered new interface driver ums-alauda
542[ 0.910379] usbcore: registered new interface driver ums-cypress
543[ 0.910396] usbcore: registered new interface driver ums-datafab
544[ 0.910416] usbcore: registered new interface driver ums-freecom
545[ 0.910433] usbcore: registered new interface driver ums-isd200
546[ 0.910450] usbcore: registered new interface driver ums-jumpshot
547[ 0.910467] usbcore: registered new interface driver ums-karma
548[ 0.910486] usbcore: registered new interface driver ums-onetouch
549[ 0.910504] usbcore: registered new interface driver ums-sddr09
550[ 0.910521] usbcore: registered new interface driver ums-sddr55
551[ 0.910538] usbcore: registered new interface driver ums-usbat
552[ 0.910580] usbcore: registered new interface driver usbserial
553[ 0.910600] usbcore: registered new interface driver usb_ehset_test
554[ 0.910629] CHRDEV "ttyGS" major number 231 goes below the dynamic allocation range
555[ 0.911425] usb_qcrndis_init: failed to register diag -17
556[ 0.911444] CHRDEV "rmnet_ctrl" major number 230 goes below the dynamic allocation range
557[ 0.911803] mousedev: PS/2 mouse device common for all mice
558[ 0.911894] tony_test:[ft5435_ts_init]
559[ 0.912219] i2c-msm-v2 78b7000.i2c: msm_bus_scale_register_client(mstr-id:86):0xf (ok)
560[ 0.912446] ~~~~~ ft5435_ts_probe start
561[ 0.912450] [ft5435_ts_probe]CONFIG_FB is defined
562[ 0.912453] [ft5435_ts_probe]CONFIG_PM is defined
563[ 0.912481] [ft5435_get_dt_vkey]000
564[ 0.912484] [ft5435_get_dt_vkey]111
565[ 0.912487] [ft5435_get_dt_vkey]222
566[ 0.912490] [ft5435_get_dt_vkey]333
567[ 0.912495] [FTS]keycode = 172, x= 500, y=2040
568[ 0.912499] [FTS]keycode = 139, x= 200, y=2040
569[ 0.912504] [FTS]keycode = 158, x= 800, y=2040
570[ 0.912506] [ft5435_get_dt_vkey]5555
571[ 0.912594] input: ft5435_ts as /devices/platform/soc/78b7000.i2c/i2c-3/3-0038/input/input1
572[ 1.126896] ft5435_ts 3-0038: Device ID = 0x54
573[ 1.127208] ft5435_ts 3-0038: report rate = 110Hz
574[ 1.127771] ft5435_ts 3-0038: Firmware version = 10.255.255
575[ 1.127916] [Fu]fw_vendor_id=0x3b
576[ 1.127920] upgrade,fts_fw_vendor_id=0x3b
577[ 1.127924] ft5435_fw_upgrade_by_array_data, suspended=0
578[ 1.127930] ft5435_ts 3-0038: Current firmware: 0x0a.255.255
579[ 1.127935] ft5435_ts 3-0038: New firmware: 0x0a.0.0
580[ 1.127939] ft5435_ts 3-0038: Exiting fw upgrade...
581[ 1.127943] ft5435_fw_upgrade_by_array_data done
582[ 1.127983] ~~~~~ tp_glove_register enable!!!!!
583[ 1.127987] [fts]ft5435_fw_LockDownInfo_get_from_boot, fw_vendor_id=0x3b
584[ 1.493601] ft5435_fw_LockDownInfo_get_from_boot, FTS_UPGRADE_LOOP ok is i = 0
585[ 1.520303] ft5435_fw_LockDownInfo_get_from_boot: REG VAL = 0x31, j=0
586[ 1.520307] ft5435_fw_LockDownInfo_get_from_boot: REG VAL = 0x36, j=1
587[ 1.520311] ft5435_fw_LockDownInfo_get_from_boot: REG VAL = 0x31, j=2
588[ 1.520315] ft5435_fw_LockDownInfo_get_from_boot: REG VAL = 0x01, j=3
589[ 1.520318] ft5435_fw_LockDownInfo_get_from_boot: REG VAL = 0xd2, j=4
590[ 1.520321] ft5435_fw_LockDownInfo_get_from_boot: REG VAL = 0x00, j=5
591[ 1.520324] ft5435_fw_LockDownInfo_get_from_boot: REG VAL = 0x31, j=6
592[ 1.520328] ft5435_fw_LockDownInfo_get_from_boot: REG VAL = 0x01, j=7
593[ 1.520332] ft5435_fw_LockDownInfo_get_from_boot: reset the tp
594[ 1.840056] tpd_probe, ft5x46_ctpm_LockDownInfo_get_from_boot, tp_lockdown_info=31363101d2003101
595[ 1.840071] ft5435_ts 3-0038: Create proc entry success!
596[ 1.840176] ~~~~~ ft5435_ts_probe end
597[ 1.840216] [FTS]fts_ts_init: Enter
598[ 1.840243] [FTS]fts_ts_probe: Enter
599[ 1.840247] [FTS]fts_parse_dt: Enter
600[ 1.840256] [FTS]3: (139, 172, 158), [900, 540, 180][2034]
601[ 1.840262] [FTS]max_touch_number=10
602[ 1.840265] [FTS]fts_parse_dt: Exit(982)
603[ 1.840272] [FTS]fts_input_dev_init: Enter
604[ 1.840275] [FTS]set key capabilities
605[ 1.840351] input: fts_ts as /devices/platform/soc/78b7000.i2c/i2c-3/3-0040/input/input2
606[ 1.840390] [FTS]fts_input_dev_init: Exit(316)
607[ 1.840394] [FTS]fts_ctpm_get_upgrade_array: Enter
608[ 1.840398] [FTS][Info]CHIP TYPE ID = 0x8716
609[ 1.840402] [FTS]fts_ctpm_get_upgrade_array: Exit(161)
610[ 1.840405] [FTS]fts_gpio_configure: Enter
611[ 1.840408] [FTS][Error][GPIO]irq gpio request failed
612[ 1.840412] [FTS]fts_gpio_configure: Exit(863)
613[ 1.840415] [FTS][Error][GPIO]Failed to configure the gpios
614[ 1.840422] fts_ts_probe:free gpio
615[ 1.840430] fts_ts: probe of 3-0040 failed with error -16
616[ 1.840455] [FTS]fts_ts_init: Exit(1506)
617[ 1.840956] gf_probe 787
618[ 1.841054] input: gf3208 as /devices/virtual/input/input3
619[ 1.841090] gf_probe 877 end, status = 0
620[ 1.841139] status = 0x0
621[ 1.841426] msm8953-pinctrl 1000000.pinctrl: invalid group "gpio16" for function "blsp_spi7"
622[ 1.841437] msm8953-pinctrl 1000000.pinctrl: invalid group "gpio17" for function "blsp_spi7"
623[ 1.841448] msm8953-pinctrl 1000000.pinctrl: invalid group "gpio18" for function "blsp_spi7"
624[ 1.841458] msm8953-pinctrl 1000000.pinctrl: invalid group "gpio19" for function "blsp_spi7"
625[ 1.841529] fpc1020 soc:fpc1020: fpc1020_probe: ok
626[ 1.841551] fpc1020_init OK
627[ 1.842061] qcom,qpnp-rtc 200f000.qcom,spmi:qcom,pm8953@0:qcom,pm8953_rtc: rtc core: registered qpnp_rtc as rtc0
628[ 1.842203] i2c /dev entries driver
629[ 1.842311] peelir_init:npages = 150
630[ 1.842506] @@@@ peelir_probe, 397
631[ 1.842510] @@@@ peelir_probe, 412
632[ 1.842562] peelir_probe: lr-gpio-valid = 0
633[ 1.842565] peelir_probe:lr_en = 73
634[ 1.845189] iommu: Adding device 1d00000.qcom,vidc:non_secure_cb to group 5
635[ 1.845627] iommu: Adding device 1d00000.qcom,vidc:secure_bitstream_cb to group 6
636[ 1.845896] scm_call failed: func id 0x42000c16, ret: -1, syscall returns: 0x0, 0x0, 0x0
637[ 1.845901] hyp_assign_table: Failed to assign memory protection, ret = -5
638[ 1.845966] iommu: Adding device 1d00000.qcom,vidc:secure_pixel_cb to group 7
639[ 1.846195] scm_call failed: func id 0x42000c16, ret: -1, syscall returns: 0x0, 0x0, 0x0
640[ 1.846199] hyp_assign_table: Failed to assign memory protection, ret = -5
641[ 1.846265] iommu: Adding device 1d00000.qcom,vidc:secure_non_pixel_cb to group 8
642[ 1.846495] scm_call failed: func id 0x42000c16, ret: -1, syscall returns: 0x0, 0x0, 0x0
643[ 1.846500] hyp_assign_table: Failed to assign memory protection, ret = -5
644[ 1.850162] iommu: Adding device soc:qcom,cam_smmu:msm_cam_smmu_cb1 to group 9
645[ 1.850245] CAM-SMMU cam_smmu_populate_sids:2081 __debug cnt = 6, cb->name: :vfe sid [0] = 1024
646[ 1.850245] ,
647[ 1.850250] CAM-SMMU cam_smmu_populate_sids:2081 __debug cnt = 6, cb->name: :vfe sid [1] = 10240
648[ 1.850250] ,
649[ 1.850308] iommu: Adding device soc:qcom,cam_smmu:msm_cam_smmu_cb3 to group 10
650[ 1.850381] CAM-SMMU cam_smmu_populate_sids:2081 __debug cnt = 3, cb->name: :cpp sid [0] = 7168
651[ 1.850381] ,
652[ 1.850429] iommu: Adding device soc:qcom,cam_smmu:msm_cam_smmu_cb4 to group 11
653[ 1.850502] CAM-SMMU cam_smmu_populate_sids:2081 __debug cnt = 3, cb->name: :jpeg_enc0 sid [0] = 6144
654[ 1.850502] ,
655[ 1.851354] msm 1b00000.qcom,msm-cam: Entity type for entity msm_cci was not initialized!
656[ 1.851432] msm_camera_get_dt_vreg_data:1125 number of entries is 0 or not present in dts
657[ 1.852994] msm 1b00000.qcom,msm-cam: Entity type for entity msm_csiphy was not initialized!
658[ 1.853042] msm_camera_get_dt_vreg_data:1125 number of entries is 0 or not present in dts
659[ 1.853163] msm 1b00000.qcom,msm-cam: Entity type for entity msm_csiphy was not initialized!
660[ 1.853208] msm_camera_get_dt_vreg_data:1125 number of entries is 0 or not present in dts
661[ 1.853277] msm 1b00000.qcom,msm-cam: Entity type for entity msm_csiphy was not initialized!
662[ 1.853320] msm_camera_get_dt_vreg_data:1125 number of entries is 0 or not present in dts
663[ 1.853656] msm_camera_get_dt_vreg_data:1125 number of entries is 0 or not present in dts
664[ 1.853666] msm 1b00000.qcom,msm-cam: Entity type for entity msm_csid was not initialized!
665[ 1.853782] msm_camera_get_dt_vreg_data:1125 number of entries is 0 or not present in dts
666[ 1.853791] msm 1b00000.qcom,msm-cam: Entity type for entity msm_csid was not initialized!
667[ 1.853904] msm_camera_get_dt_vreg_data:1125 number of entries is 0 or not present in dts
668[ 1.853912] msm 1b00000.qcom,msm-cam: Entity type for entity msm_csid was not initialized!
669[ 1.854204] msm_actuator_platform_probe:1987 msm_actuator_platform_probe: No/Error Actuator GPIOs
670[ 1.854211] msm 1b00000.qcom,msm-cam: Entity type for entity msm_actuator was not initialized!
671[ 1.854268] msm_actuator_platform_probe:1987 msm_actuator_platform_probe: No/Error Actuator GPIOs
672[ 1.854274] msm 1b00000.qcom,msm-cam: Entity type for entity msm_actuator was not initialized!
673[ 1.854700] msm_eeprom_platform_probe qcom,i2c-freq-mode read fail. Setting to 0 -22
674[ 1.871240] msm_cci_init:1442: hw_version = 0x10020005
675[ 1.954243] msm 1b00000.qcom,msm-cam: Entity type for entity msm_eeprom was not initialized!
676[ 1.954496] msm_eeprom_platform_probe qcom,i2c-freq-mode read fail. Setting to 0 -22
677[ 1.970092] msm_cci_init:1442: hw_version = 0x10020005
678[ 1.970547] msm_cci_irq:1813 MASTER_1 error 0x40000000
679[ 1.970574] msm_cci_i2c_read:965 read_words = 0, exp words = 1
680[ 1.970579] msm_cci_i2c_read_bytes:1048 failed rc -22
681[ 1.970583] read_eeprom_memory error
682[ 1.970586] msm_eeprom_platform_probe read_eeprom_memory failed
683[ 1.985811] qcom,eeprom: probe of 1b0c000.qcom,cci:qcom,eeprom@3 failed with error -22
684[ 1.986018] msm_eeprom_platform_probe qcom,i2c-freq-mode read fail. Setting to 0 -22
685[ 2.002848] msm_cci_init:1442: hw_version = 0x10020005
686[ 2.883685] msm 1b00000.qcom,msm-cam: Entity type for entity msm_eeprom was not initialized!
687[ 2.883924] msm_eeprom_platform_probe qcom,i2c-freq-mode read fail. Setting to 0 -22
688[ 2.901001] msm_cci_init:1442: hw_version = 0x10020005
689[ 3.781789] msm 1b00000.qcom,msm-cam: Entity type for entity msm_eeprom was not initialized!
690[ 3.782031] msm_eeprom_platform_probe qcom,i2c-freq-mode read fail. Setting to 0 -22
691[ 3.798288] msm_cci_init:1442: hw_version = 0x10020005
692[ 3.893728] IPC_RTR: msm_ipc_router_smd_driver_register Already driver registered IPCRTR
693[ 3.893733] IPC_RTR: msm_ipc_router_smd_driver_register Already driver registered IPCRTR
694[ 4.679095] msm 1b00000.qcom,msm-cam: Entity type for entity msm_eeprom was not initialized!
695[ 4.679325] msm_eeprom_platform_probe qcom,i2c-freq-mode read fail. Setting to 0 -22
696[ 4.696378] msm_cci_init:1442: hw_version = 0x10020005
697[ 5.577165] msm 1b00000.qcom,msm-cam: Entity type for entity msm_eeprom was not initialized!
698[ 5.577873] msm 1b00000.qcom,msm-cam: Entity type for entity msm_camera_flash was not initialized!
699[ 5.578581] msm 1b00000.qcom,msm-cam: Entity type for entity msm_sensor_init was not initialized!
700[ 5.582108] MSM-CPP cpp_init_hardware:1133 CPP HW Version: 0x40030003
701[ 5.582114] MSM-CPP cpp_init_hardware:1151 stream_cnt:0
702[ 5.582124] msm 1b00000.qcom,msm-cam: Entity type for entity 1b04000.qcom,cpp was not initialized!
703[ 5.582203] MSM-CPP cpp_release_hardware:1214 cpp hw release done
704[ 5.583222] CAM-SOC msm_camera_get_reg_base:870 err: mem resource vfe_fuse not found
705[ 5.583227] CAM-SOC msm_camera_get_res_size:913 err: mem resource vfe_fuse not found
706[ 5.583298] msm_vfe47_get_clks: cannot find camss_vfe_stream_clk
707[ 5.584026] msm 1b00000.qcom,msm-cam: Entity type for entity 1b10000.qcom,vfe0 was not initialized!
708[ 5.584111] CAM-SOC msm_camera_get_reg_base:870 err: mem resource vfe_fuse not found
709[ 5.584116] CAM-SOC msm_camera_get_res_size:913 err: mem resource vfe_fuse not found
710[ 5.584178] msm_vfe47_get_clks: cannot find camss_vfe_stream_clk
711[ 5.584206] msm 1b00000.qcom,msm-cam: Entity type for entity 1b14000.qcom,vfe1 was not initialized!
712[ 5.584692] msm 1b00000.qcom,msm-cam: Entity type for entity 1b31000.qcom,ispif was not initialized!
713[ 5.584952] __msm_jpeg_init:1551] Jpeg Device id 0
714[ 5.585084] CHRDEV "jpeg0" major number 229 goes below the dynamic allocation range
715[ 5.585191] msm 1b00000.qcom,msm-cam: Entity type for entity msm_buf_mngr was not initialized!
716[ 5.585949] FG: fg_check_ima_exception: Initial ima_err_sts=0 ima_exp_sts=0 ima_hw_sts=88
717[ 5.587548] FG: fg_probe: FG Probe success - FG Revision DIG:3.1 ANA:1.2 PMIC subtype=55
718[ 5.590151] SMBCHG: smbchg_hvdcp_enable_cb: smbchg_hvdcp_enable_cb HVDCP disabled
719[ 5.599885] qpnp-smbcharger 200f000.qcom,spmi:qcom,pmi8950@2:qcom,qpnp-smbcharger: SMBCHG successfully probe Charger version=SCHG_LITE Revision DIG:0.0 ANA:0.1 batt=1 dc=0 usb=1
720[ 5.601797] TYPEC: qpnp_typec_probe: TypeC successfully probed state=18 CC-line-state=1
721[ 5.602830] thermal thermal_zone1: failed to read out thermal zone (-517)
722[ 5.603072] thermal thermal_zone18: failed to read out thermal zone (-517)
723[ 5.603108] thermal thermal_zone46: failed to read out thermal zone (-517)
724[ 5.603465] qpnp_vadc_read: Error reading die_temp
725[ 5.624774] md: linear personality registered for level -1
726[ 5.624865] device-mapper: uevent: version 1.0.3
727[ 5.624986] device-mapper: ioctl: 4.35.0-ioctl (2016-06-23) initialised: dm-devel@redhat.com
728[ 5.625133] device-mapper: req-crypt: dm-req-crypt successfully initalized.
729[ 5.625133]
730[ 5.625519] CHRDEV "bt" major number 228 goes below the dynamic allocation range
731[ 5.625592] sdhci: Secure Digital Host Controller Interface driver
732[ 5.625595] sdhci: Copyright(c) Pierre Ossman
733[ 5.625599] sdhci-pltfm: SDHCI platform and OF driver helper
734[ 5.627870] sdhci_msm 7824900.sdhci: failed opening nvmem cell err : -2
735[ 5.627882] qcom_ice_get_pdevice: found ice device ffffffc0e8240600
736[ 5.627886] qcom_ice_get_pdevice: matching platform device ffffffc0ec92bc00
737[ 5.630849] i2c-msm-v2 78b6000.i2c: msm_bus_scale_register_client(mstr-id:86):0x15 (ok)
738[ 5.630962] qcom_ice 7803000.sdcc1ice: QC ICE 2.1.44 device found @0xffffff800bc60000
739[ 5.631598] mmc0: SDHCI controller on 7824900.sdhci [7824900.sdhci] using 64-bit ADMA in CMDQ mode
740[ 5.631651] usbcore: registered new interface driver usbhid
741[ 5.631654] usbhid: USB HID core driver
742[ 5.631770] ashmem: initialized
743[ 5.631950] qpnp_coincell_charger_show_state: enabled=Y, voltage=3200 mV, resistance=2100 ohm
744[ 5.707646] mmc0: Out-of-interrupt timeout is 246[ms]
745[ 5.707651] mmc0: eMMC FW version: 0x04
746[ 5.707655] mmc0: CMDQ supported: depth: 32
747[ 5.707659] mmc0: cache barrier support 1 flush policy 1
748[ 5.718649] cmdq_host_alloc_tdl: desc_size: 768 data_sz: 63488 slot-sz: 24
749[ 5.718789] mmc0: CMDQ enabled on card
750[ 5.718799] mmc0: new HS400 Enhanced strobe MMC card at address 0001
751[ 5.719279] sdhci_msm_pm_qos_cpu_init (): voted for group #0 (mask=0xf) latency=-1
752[ 5.719285] sdhci_msm_pm_qos_cpu_init (): voted for group #1 (mask=0xf0) latency=-1
753[ 5.719365] mmcblk0: mmc0:0001 S0J9F8 58.2 GiB
754[ 5.719561] mmcblk0rpmb: mmc0:0001 S0J9F8 partition 3 4.00 MiB
755[ 5.721420] mmcblk0: p1 p2 p3 p4 p5 p6 p7 p8 p9 p10 p11 p12 p13 p14 p15 p16 p17 p18 p19 p20 p21 p22 p23 p24 p25 p26 p27 p28 p29 p30 p31 p32 p33 p34 p35 p36 p37 p38 p39 p40 p41 p42 p43 p44 p45 p46 p47 p48 p49
756[ 5.723871] tz_log 8600720.tz-log: Hyp log service is not supported
757[ 5.725637] sdhci_msm 7864900.sdhci: failed opening nvmem cell err : -2
758[ 5.725646] sdhci_msm 7864900.sdhci: sdhci_msm_probe: ICE device is not enabled
759[ 5.739874] mmc1: SDHCI controller on 7864900.sdhci [7864900.sdhci] using 64-bit ADMA in legacy mode
760[ 5.770287] bimc-bwmon 408000.qcom,cpu-bwmon: BW HWmon governor registered.
761[ 5.772753] coresight-tmc 6028000.tmc: failed to get flush cti
762[ 5.772759] coresight-tmc 6028000.tmc: failed to get reset cti
763[ 5.772765] coresight-tmc 6028000.tmc: failed to get csr, defer probe
764[ 5.772848] coresight-tmc 6027000.tmc: failed to get flush cti
765[ 5.772852] coresight-tmc 6027000.tmc: failed to get reset cti
766[ 5.772857] coresight-tmc 6027000.tmc: failed to get csr, defer probe
767[ 5.773822] coresight-replicator-qcom 6026000.replicator: REPLICATOR 1.0 initialized
768[ 5.773929] coresight-stm 6002000.stm: stm_register_device failed, probing deffered
769[ 5.774332] OF: graph: no port node found in /soc/cti@6010000
770[ 5.774404] OF: graph: no port node found in /soc/cti@6011000
771[ 5.774470] OF: graph: no port node found in /soc/cti@6012000
772[ 5.774535] OF: graph: no port node found in /soc/cti@6013000
773[ 5.774600] OF: graph: no port node found in /soc/cti@6014000
774[ 5.774678] OF: graph: no port node found in /soc/cti@6015000
775[ 5.774744] OF: graph: no port node found in /soc/cti@6016000
776[ 5.774813] OF: graph: no port node found in /soc/cti@6017000
777[ 5.774877] OF: graph: no port node found in /soc/cti@6018000
778[ 5.774943] OF: graph: no port node found in /soc/cti@6019000
779[ 5.775015] OF: graph: no port node found in /soc/cti@601a000
780[ 5.775081] OF: graph: no port node found in /soc/cti@601b000
781[ 5.775149] OF: graph: no port node found in /soc/cti@601c000
782[ 5.775214] OF: graph: no port node found in /soc/cti@601d000
783[ 5.775282] OF: graph: no port node found in /soc/cti@601e000
784[ 5.775349] OF: graph: no port node found in /soc/cti@601f000
785[ 5.775418] OF: graph: no port node found in /soc/cti@6198000
786[ 5.775492] OF: graph: no port node found in /soc/cti@6199000
787[ 5.775564] OF: graph: no port node found in /soc/cti@619a000
788[ 5.775639] OF: graph: no port node found in /soc/cti@619b000
789[ 5.775713] OF: graph: no port node found in /soc/cti@61b8000
790[ 5.775797] OF: graph: no port node found in /soc/cti@61b9000
791[ 5.775876] OF: graph: no port node found in /soc/cti@61ba000
792[ 5.775959] OF: graph: no port node found in /soc/cti@61bb000
793[ 5.776043] OF: graph: no port node found in /soc/cti@6128000
794[ 5.776112] OF: graph: no port node found in /soc/cti@6124000
795[ 5.776183] OF: graph: no port node found in /soc/cti@6134000
796[ 5.776250] OF: graph: no port node found in /soc/cti@6139000
797[ 5.776322] OF: graph: no port node found in /soc/cti@613c000
798[ 5.776392] OF: graph: no port node found in /soc/cti@610c000
799[ 5.776521] OF: graph: no port node found in /soc/csr@6001000
800[ 5.776561] coresight-csr 6001000.csr: CSR initialized: coresight-csr
801[ 5.776802] OF: graph: no port node found in /soc/hwevent@6101000
802[ 5.776853] coresight-hwevent 6101000.hwevent: Hardware Event driver initialized
803[ 5.777265] CHRDEV "sensors" major number 227 goes below the dynamic allocation range
804[ 5.777470] usbcore: registered new interface driver snd-usb-audio
805[ 5.777943] pmic_analog_codec 200f000.qcom,spmi:qcom,pm8953@1:analog-codec@f000: Adsp is not loaded yet 0
806[ 5.779960] max98927 reset gpio requse name:max98927L------
807[ 5.779968] reset_gpio_l:86------
808[ 5.800302] max98927 L device version 0x42
809[ 5.800305] max98927 L read ok.
810[ 5.800309] max98927 R read enter.
811[ 5.800318] max98927 driver probe end.
812[ 5.800322] f0_detect_init
813[ 5.808106] msm-dai-tdm soc:qcom,msm-dai-tdm-pri-rx: msm_dai_tdm_q6_probe: dev_name: soc:qcom,msm-dai-tdm-pri-rx group_id: 0x9100
814[ 5.808263] msm-dai-q6-tdm soc:qcom,msm-dai-tdm-pri-rx:qcom,msm-dai-q6-tdm-pri-rx-0: msm_dai_q6_tdm_dev_probe: dev_name: soc:qcom,msm-dai-tdm-pri-rx:qcom,msm-dai-q6-tdm-pri-rx-0 dev_id: 0x9000
815[ 5.808274] msm-dai-q6-tdm soc:qcom,msm-dai-tdm-pri-rx:qcom,msm-dai-q6-tdm-pri-rx-0: msm_dai_q6_tdm_dev_probe: Custom tdm header not supported
816[ 5.808296] msm-dai-tdm soc:qcom,msm-dai-tdm-pri-tx: msm_dai_tdm_q6_probe: dev_name: soc:qcom,msm-dai-tdm-pri-tx group_id: 0x9101
817[ 5.808438] msm-dai-q6-tdm soc:qcom,msm-dai-tdm-pri-tx:qcom,msm-dai-q6-tdm-pri-tx-0: msm_dai_q6_tdm_dev_probe: dev_name: soc:qcom,msm-dai-tdm-pri-tx:qcom,msm-dai-q6-tdm-pri-tx-0 dev_id: 0x9001
818[ 5.808448] msm-dai-q6-tdm soc:qcom,msm-dai-tdm-pri-tx:qcom,msm-dai-q6-tdm-pri-tx-0: msm_dai_q6_tdm_dev_probe: Custom tdm header not supported
819[ 5.808468] msm-dai-tdm soc:qcom,msm-dai-tdm-sec-rx: msm_dai_tdm_q6_probe: dev_name: soc:qcom,msm-dai-tdm-sec-rx group_id: 0x9110
820[ 5.808605] msm-dai-q6-tdm soc:qcom,msm-dai-tdm-sec-rx:qcom,msm-dai-q6-tdm-sec-rx-0: msm_dai_q6_tdm_dev_probe: dev_name: soc:qcom,msm-dai-tdm-sec-rx:qcom,msm-dai-q6-tdm-sec-rx-0 dev_id: 0x9010
821[ 5.808615] msm-dai-q6-tdm soc:qcom,msm-dai-tdm-sec-rx:qcom,msm-dai-q6-tdm-sec-rx-0: msm_dai_q6_tdm_dev_probe: Custom tdm header not supported
822[ 5.808636] msm-dai-tdm soc:qcom,msm-dai-tdm-sec-tx: msm_dai_tdm_q6_probe: dev_name: soc:qcom,msm-dai-tdm-sec-tx group_id: 0x9111
823[ 5.808773] msm-dai-q6-tdm soc:qcom,msm-dai-tdm-sec-tx:qcom,msm-dai-q6-tdm-sec-tx-0: msm_dai_q6_tdm_dev_probe: dev_name: soc:qcom,msm-dai-tdm-sec-tx:qcom,msm-dai-q6-tdm-sec-tx-0 dev_id: 0x9011
824[ 5.808782] msm-dai-q6-tdm soc:qcom,msm-dai-tdm-sec-tx:qcom,msm-dai-q6-tdm-sec-tx-0: msm_dai_q6_tdm_dev_probe: Custom tdm header not supported
825[ 5.808805] msm-dai-tdm soc:qcom,msm-dai-tdm-tert-rx: msm_dai_tdm_q6_probe: dev_name: soc:qcom,msm-dai-tdm-tert-rx group_id: 0x9120
826[ 5.808943] msm-dai-q6-tdm soc:qcom,msm-dai-tdm-tert-rx:qcom,msm-dai-q6-tdm-tert-rx-0: msm_dai_q6_tdm_dev_probe: dev_name: soc:qcom,msm-dai-tdm-tert-rx:qcom,msm-dai-q6-tdm-tert-rx-0 dev_id: 0x9020
827[ 5.808952] msm-dai-q6-tdm soc:qcom,msm-dai-tdm-tert-rx:qcom,msm-dai-q6-tdm-tert-rx-0: msm_dai_q6_tdm_dev_probe: Custom tdm header not supported
828[ 5.808973] msm-dai-tdm soc:qcom,msm-dai-tdm-tert-tx: msm_dai_tdm_q6_probe: dev_name: soc:qcom,msm-dai-tdm-tert-tx group_id: 0x9121
829[ 5.809107] msm-dai-q6-tdm soc:qcom,msm-dai-tdm-tert-tx:qcom,msm-dai-q6-tdm-tert-tx-0: msm_dai_q6_tdm_dev_probe: dev_name: soc:qcom,msm-dai-tdm-tert-tx:qcom,msm-dai-q6-tdm-tert-tx-0 dev_id: 0x9021
830[ 5.809118] msm-dai-q6-tdm soc:qcom,msm-dai-tdm-tert-tx:qcom,msm-dai-q6-tdm-tert-tx-0: msm_dai_q6_tdm_dev_probe: Custom tdm header not supported
831[ 5.809140] msm-dai-tdm soc:qcom,msm-dai-tdm-quat-rx: msm_dai_tdm_q6_probe: dev_name: soc:qcom,msm-dai-tdm-quat-rx group_id: 0x9130
832[ 5.809279] msm-dai-q6-tdm soc:qcom,msm-dai-tdm-quat-rx:qcom,msm-dai-q6-tdm-quat-rx-0: msm_dai_q6_tdm_dev_probe: dev_name: soc:qcom,msm-dai-tdm-quat-rx:qcom,msm-dai-q6-tdm-quat-rx-0 dev_id: 0x9030
833[ 5.809289] msm-dai-q6-tdm soc:qcom,msm-dai-tdm-quat-rx:qcom,msm-dai-q6-tdm-quat-rx-0: msm_dai_q6_tdm_dev_probe: Custom tdm header not supported
834[ 5.809310] msm-dai-tdm soc:qcom,msm-dai-tdm-quat-tx: msm_dai_tdm_q6_probe: dev_name: soc:qcom,msm-dai-tdm-quat-tx group_id: 0x9131
835[ 5.809447] msm-dai-q6-tdm soc:qcom,msm-dai-tdm-quat-tx:qcom,msm-dai-q6-tdm-quat-tx-0: msm_dai_q6_tdm_dev_probe: dev_name: soc:qcom,msm-dai-tdm-quat-tx:qcom,msm-dai-q6-tdm-quat-tx-0 dev_id: 0x9031
836[ 5.809456] msm-dai-q6-tdm soc:qcom,msm-dai-tdm-quat-tx:qcom,msm-dai-q6-tdm-quat-tx-0: msm_dai_q6_tdm_dev_probe: Custom tdm header not supported
837[ 5.809477] msm-dai-tdm soc:qcom,msm-dai-tdm-quin-rx: msm_dai_tdm_q6_probe: dev_name: soc:qcom,msm-dai-tdm-quin-rx group_id: 0x9140
838[ 5.809616] msm-dai-q6-tdm soc:qcom,msm-dai-tdm-quin-rx:qcom,msm-dai-q6-tdm-quin-rx-0: msm_dai_q6_tdm_dev_probe: dev_name: soc:qcom,msm-dai-tdm-quin-rx:qcom,msm-dai-q6-tdm-quin-rx-0 dev_id: 0x9040
839[ 5.809626] msm-dai-q6-tdm soc:qcom,msm-dai-tdm-quin-rx:qcom,msm-dai-q6-tdm-quin-rx-0: msm_dai_q6_tdm_dev_probe: Custom tdm header not supported
840[ 5.809647] msm-dai-tdm soc:qcom,msm-dai-tdm-quin-tx: msm_dai_tdm_q6_probe: dev_name: soc:qcom,msm-dai-tdm-quin-tx group_id: 0x9141
841[ 5.809781] msm-dai-q6-tdm soc:qcom,msm-dai-tdm-quin-tx:qcom,msm-dai-q6-tdm-quin-tx-0: msm_dai_q6_tdm_dev_probe: dev_name: soc:qcom,msm-dai-tdm-quin-tx:qcom,msm-dai-q6-tdm-quin-tx-0 dev_id: 0x9041
842[ 5.809790] msm-dai-q6-tdm soc:qcom,msm-dai-tdm-quin-tx:qcom,msm-dai-q6-tdm-quin-tx-0: msm_dai_q6_tdm_dev_probe: Custom tdm header not supported
843[ 5.815821] msm8952-asoc-wcd c051000.sound: msm8952_asoc_machine_probe:of read string qcom,msm-ext-pa i 0 ret 0
844[ 5.815835] msm8952-asoc-wcd c051000.sound: property qcom,cdc-us-euro-gpios in node /soc/sound not found -2
845[ 5.815848] msm8952-asoc-wcd c051000.sound: Headset is using internal micbias
846[ 5.816264] msm8952-asoc-wcd c051000.sound: ASoC: platform /soc/qcom,msm-pcm-voice not registered
847[ 5.816271] msm8952-asoc-wcd c051000.sound: snd_soc_register_card failed (-517)
848[ 5.818372] CHRDEV "avtimer" major number 226 goes below the dynamic allocation range
849[ 5.818690] audio_notifier_init: PDR register failed, ret = -19, disable service
850[ 5.819006] audio_notifer_reg_service: service SSR_ADSP is in use
851[ 5.819011] audio_notifer_reg_service: service SSR_MODEM is in use
852[ 5.820004] u32 classifier
853[ 5.820008] Actions configured
854[ 5.820044] Netfilter messages via NETLINK v0.30.
855[ 5.820184] nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
856[ 5.820278] ctnetlink v0.93: registering with nfnetlink.
857[ 5.820519] xt_time: kernel timezone is -0000
858[ 5.820578] IPv4 over IPsec tunneling driver
859[ 5.820853] ip_tables: (C) 2000-2006 Netfilter Core Team
860[ 5.820970] arp_tables: arp_tables: (C) 2002 David S. Miller
861[ 5.821010] Initializing XFRM netlink socket
862[ 5.821190] NET: Registered protocol family 10
863[ 5.821807] mip6: Mobile IPv6
864[ 5.821820] ip6_tables: (C) 2000-2006 Netfilter Core Team
865[ 5.822139] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver
866[ 5.822575] NET: Registered protocol family 17
867[ 5.822588] NET: Registered protocol family 15
868[ 5.822602] Ebtables v2.0 registered
869[ 5.822691] l2tp_core: L2TP core driver, V2.0
870[ 5.822700] l2tp_ppp: PPPoL2TP kernel driver, V2.0
871[ 5.822703] l2tp_ip: L2TP IP encapsulation support (L2TPv3)
872[ 5.822714] l2tp_netlink: L2TP netlink interface
873[ 5.822734] l2tp_eth: L2TP ethernet pseudowire support (L2TPv3)
874[ 5.822737] l2tp_ip6: L2TP IP encapsulation support for IPv6 (L2TPv3)
875[ 5.823386] NET: Registered protocol family 27
876[ 5.823574] spmi spmi-0: error: impermissible write to peripheral sid:0 addr:0xc441
877[ 5.823581] qcom-spmi-gpio 200f000.qcom,spmi:qcom,pm8953@0:gpios: write 0x41 failed
878[ 5.823589] adv_vreg: Failed to request enable GPIO1277: -19
879[ 5.823595] reg-fixed-voltage soc:adv_vreg: Failed to register regulator: -19
880[ 5.825851] minidump-id not found for adsp
881[ 5.827443] minidump-id not found for wcnss
882[ 5.827531] subsys-pil-tz a21b000.qcom,pronto: for wcnss segments only will be dumped.
883[ 5.827948] minidump-id not found for modem
884[ 5.828183] pil-q6v5-mss 4080000.qcom,mss: for modem segments only will be dumped.
885[ 5.828220] pil-q6v5-mss 4080000.qcom,mss: for md_modem segments only will be dumped.
886[ 5.831153] sps:BAM 0x0000000007104000 is registered.
887[ 5.831711] CHRDEV "byte-cntr" major number 224 goes below the dynamic allocation range
888[ 5.831881] sps:BAM 0x0000000006044000 is registered.
889[ 5.832373] CHRDEV "6002000.stm" major number 223 goes below the dynamic allocation range
890[ 5.832481] coresight-stm 6002000.stm: STM32 initialized
891[ 5.832680] pmic_analog_codec 200f000.qcom,spmi:qcom,pm8953@1:analog-codec@f000: Adsp is not loaded yet 0
892[ 5.836357] msm8952-asoc-wcd c051000.sound: msm8952_asoc_machine_probe:of read string qcom,msm-ext-pa i 0 ret 0
893[ 5.836372] msm8952-asoc-wcd c051000.sound: property qcom,cdc-us-euro-gpios in node /soc/sound not found -2
894[ 5.836385] msm8952-asoc-wcd c051000.sound: Headset is using internal micbias
895[ 5.836843] msm8952-asoc-wcd c051000.sound: ASoC: platform /soc/qcom,msm-pcm-voice not registered
896[ 5.836850] msm8952-asoc-wcd c051000.sound: snd_soc_register_card failed (-517)
897[ 5.837343] Registered cp15_barrier emulation handler
898[ 5.837363] Registered setend emulation handler
899[ 5.837563] registered taskstats version 1
900[ 5.837575] Loading compiled-in X.509 certificates
901[ 5.838025] msm-dwc3 7000000.ssusb: DWC3 exited from low power mode
902[ 5.839570] Loaded X.509 cert 'Build time autogenerated kernel key: 991d22ce7fb8abe75921dbfb3a896c28c9c5269b'
903[ 5.840366] Loaded X.509 cert 'Android: 7e4333f9bba00adfe0ede979e28ed1920492b40f'
904[ 5.841717] qcom,cc-debug-8953 1874000.qcom,cc-debug: Registered Debug Mux successfully
905[ 5.846053] iommu: Adding device soc:qcom,msm_fastrpc:qcom,msm_fastrpc_compute_cb to group 12
906[ 5.847045] CHRDEV "adsprpc-smd" major number 222 goes below the dynamic allocation range
907[ 5.847309] pmic_analog_codec 200f000.qcom,spmi:qcom,pm8953@1:analog-codec@f000: Adsp is not loaded yet 0
908[ 5.850904] msm8952-asoc-wcd c051000.sound: msm8952_asoc_machine_probe:of read string qcom,msm-ext-pa i 0 ret 0
909[ 5.850918] msm8952-asoc-wcd c051000.sound: property qcom,cdc-us-euro-gpios in node /soc/sound not found -2
910[ 5.850931] msm8952-asoc-wcd c051000.sound: Headset is using internal micbias
911[ 5.851369] msm8952-asoc-wcd c051000.sound: ASoC: platform /soc/qcom,msm-pcm-voice not registered
912[ 5.851376] msm8952-asoc-wcd c051000.sound: snd_soc_register_card failed (-517)
913[ 5.852641] input: gpio-keys as /devices/platform/soc/soc:gpio_keys/input/input4
914[ 5.852842] qcom,qpnp-rtc 200f000.qcom,spmi:qcom,pm8953@0:qcom,pm8953_rtc: setting system clock to 1970-01-02 15:13:32 UTC (141212)
915[ 5.854144] pmic_analog_codec 200f000.qcom,spmi:qcom,pm8953@1:analog-codec@f000: Adsp is not loaded yet 0
916[ 5.857815] msm8952-asoc-wcd c051000.sound: msm8952_asoc_machine_probe:of read string qcom,msm-ext-pa i 0 ret 0
917[ 5.857830] msm8952-asoc-wcd c051000.sound: property qcom,cdc-us-euro-gpios in node /soc/sound not found -2
918[ 5.857843] msm8952-asoc-wcd c051000.sound: Headset is using internal micbias
919[ 5.858279] msm8952-asoc-wcd c051000.sound: ASoC: platform /soc/qcom,msm-pcm-voice not registered
920[ 5.858286] msm8952-asoc-wcd c051000.sound: snd_soc_register_card failed (-517)
921[ 5.858692] lpm_levels_of: idx 1 276
922[ 5.858699] lpm_levels_of: Residency < 0 for LPM
923[ 5.858775] lpm_levels_of: idx 1 286
924[ 5.858780] lpm_levels_of: Residency < 0 for LPM
925[ 5.859022] lpm_levels: register_cluster_lpm_stats()
926[ 5.859166] lpm_levels: register_cluster_lpm_stats()
927[ 5.860743] qcom,qpnp-flash-led 200f000.qcom,spmi:qcom,pmi8950@3:qcom,leds@d300: Unable to acquire pinctrl
928[ 5.862249] rmnet_ipa started initialization
929[ 5.862254] IPA SSR support = True
930[ 5.862257] IPA ipa-loaduC = True
931[ 5.862261] IPA SG support = True
932[ 5.862264] IPA Napi Enable = False
933[ 5.862268] using default for wan-rx-desc-size = 1024
934[ 5.862636] pmic_analog_codec 200f000.qcom,spmi:qcom,pm8953@1:analog-codec@f000: Adsp is not loaded yet 0
935[ 5.863529] CHRDEV "wwan_ioctl" major number 221 goes below the dynamic allocation range
936[ 5.864069] ipa ipa_sps_irq_control_all:963 EP (5) not allocated.
937[ 5.864076] ipa ipa2_uc_state_check:302 uC is not loaded
938[ 5.865053] rmnet_ipa completed initialization
939[ 5.865419] RNDIS_IPA module is loaded.
940[ 5.865431] clock_late_init: Removing enables held for handed-off clocks
941[ 5.866660] msm8952-asoc-wcd c051000.sound: msm8952_asoc_machine_probe:of read string qcom,msm-ext-pa i 0 ret 0
942[ 5.866675] msm8952-asoc-wcd c051000.sound: property qcom,cdc-us-euro-gpios in node /soc/sound not found -2
943[ 5.866724] msm8952-asoc-wcd c051000.sound: Headset is using internal micbias
944[ 5.867156] msm8952-asoc-wcd c051000.sound: ASoC: platform /soc/qcom,msm-pcm-voice not registered
945[ 5.867163] msm8952-asoc-wcd c051000.sound: snd_soc_register_card failed (-517)
946[ 5.867594] pmic_analog_codec 200f000.qcom,spmi:qcom,pm8953@1:analog-codec@f000: Adsp is not loaded yet 0
947[ 5.869276] apc_mem_acc_corner: disabling
948[ 5.869280] gfx_mem_acc_corner: disabling
949[ 5.869297] vdd_vreg: disabling
950[ 5.869320] ALSA device list:
951[ 5.869324] No soundcards found.
952[ 5.869366] Warning: unable to open an initial console.
953[ 5.870929] Freeing unused kernel memory: 6144K
954[ 5.871217] msm8952-asoc-wcd c051000.sound: msm8952_asoc_machine_probe:of read string qcom,msm-ext-pa i 0 ret 0
955[ 5.871236] msm8952-asoc-wcd c051000.sound: property qcom,cdc-us-euro-gpios in node /soc/sound not found -2
956[ 5.871254] msm8952-asoc-wcd c051000.sound: Headset is using internal micbias
957[ 5.871733] msm8952-asoc-wcd c051000.sound: ASoC: platform /soc/qcom,msm-pcm-voice not registered
958[ 5.871740] msm8952-asoc-wcd c051000.sound: snd_soc_register_card failed (-517)
959[ 5.874398] init: init first stage started!
960[ 5.874418] init: First stage mount skipped (recovery mode)
961[ 5.874528] init: Using Android DT directory /proc/device-tree/firmware/android/
962[ 5.874827] init: [libfs_mgr]dt_fstab: Skip disabled entry for partition vendor
963[ 5.874871] init: [libfs_mgr]dt_fstab: Skip disabled entry for partition system
964[ 5.874888] init: [libfs_mgr]fs_mgr_read_fstab_dt(): failed to read fstab from dt
965[ 5.874934] init: Failed to read fstab from device tree
966[ 5.874976] init: [libfs_mgr]Empty by_name_symlink_map when opening FsManagerAvbHandle
967[ 5.874988] init: Failed to open FsManagerAvbHandle for INIT_AVB_VERSION: No such file or directory
968[ 5.875116] init: Loading SELinux policy
969[ 5.878432] SELinux: 8192 avtab hash slots, 16624 rules.
970[ 5.883890] SELinux: 8192 avtab hash slots, 16624 rules.
971[ 5.883898] SELinux: 1 users, 2 roles, 1327 types, 0 bools, 1 sens, 1024 cats
972[ 5.883901] SELinux: 93 classes, 16624 rules
973[ 5.886525] SELinux: Completing initialization.
974[ 5.886527] SELinux: Setting up existing superblocks.
975[ 5.961246] audit: type=1403 audit(141212.606:2): policy loaded auid=4294967295 ses=4294967295
976[ 5.964246] init: 2 output lines suppressed due to ratelimiting
977[ 5.966084] init: init second stage started!
978[ 5.972361] init: Using Android DT directory /proc/device-tree/firmware/android/
979[ 5.974547] selinux: SELinux: Loaded file_contexts
980[ 5.974547]
981[ 5.974564] init: Running restorecon...
982[ 5.977045] selinux: SELinux: Could not stat /dev/block: No such file or directory.
983[ 5.977045]
984[ 5.977265] init: waitid failed: No child processes
985[ 5.977314] init: Couldn't load property file '/system/etc/prop.default': open() failed: No such file or directory: No such file or directory
986[ 5.978278] init: Couldn't load property file '/product/build.prop': open() failed: No such file or directory: No such file or directory
987[ 5.978303] init: Couldn't load property file '/odm/default.prop': open() failed: No such file or directory: No such file or directory
988[ 5.978325] init: Couldn't load property file '/vendor/default.prop': open() failed: No such file or directory: No such file or directory
989[ 5.981196] audit: type=1400 audit(141212.626:3): avc: denied { setcheckreqprot } for pid=1 comm="init" scontext=u:r:init:s0 tcontext=u:object_r:kernel:s0 tclass=security permissive=1
990[ 5.981865] audit: type=1400 audit(141212.626:4): avc: denied { create } for pid=1 comm="init" name="cgroup.procs" scontext=u:r:init:s0 tcontext=u:object_r:rootfs:s0 tclass=file permissive=1
991[ 5.981890] audit: type=1400 audit(141212.626:5): avc: denied { write } for pid=1 comm="init" path="/acct/uid_0/pid_402/cgroup.procs" dev="rootfs" ino=14329 scontext=u:r:init:s0 tcontext=u:object_r:rootfs:s0 tclass=file permissive=1
992[ 5.984403] ueventd: ueventd started!
993[ 5.985859] selinux: SELinux: Loaded file_contexts
994[ 5.985859]
995[ 5.985909] ueventd: Parsing file /ueventd.rc...
996[ 5.986357] ueventd: Parsing file /vendor/ueventd.rc...
997[ 5.986383] ueventd: Unable to read config file '/vendor/ueventd.rc': open() failed: No such file or directory
998[ 5.986400] ueventd: Parsing file /odm/ueventd.rc...
999[ 5.986418] ueventd: Unable to read config file '/odm/ueventd.rc': open() failed: No such file or directory
1000[ 5.986483] ueventd: Parsing file /ueventd.qcom.rc...
1001[ 5.986508] ueventd: Unable to read config file '/ueventd.qcom.rc': open() failed: No such file or directory
1002[ 5.986978] ueventd: [libfs_mgr]dt_fstab: Skip disabled entry for partition vendor
1003[ 6.145792] audit: type=1400 audit(141212.790:6): avc: denied { setattr } for pid=1 comm="init" name="system" dev="rootfs" ino=14696 scontext=u:r:init:s0 tcontext=u:object_r:rootfs:s0 tclass=lnk_file permissive=1
1004[ 6.147436] pstore: decompression failed;returned -5
1005[ 6.148724] audit: type=1400 audit(141212.793:7): avc: denied { module_request } for pid=1 comm="init" kmod="fs-functionfs" scontext=u:r:init:s0 tcontext=u:r:kernel:s0 tclass=system permissive=1
1006[ 6.155150] Mass Storage Function, version: 2009/09/11
1007[ 6.155165] LUN: removable file: (no medium)
1008[ 6.156359] file system registered
1009[ 6.156599] CHRDEV "msm_usb_bridge" major number 220 goes below the dynamic allocation range
1010[ 6.162913] f_cdev_alloc: port_name:at_usb0 (0000000000000000) portno:(0)
1011[ 6.164645] f_cdev_alloc: port_name:at_usb1 (0000000000000000) portno:(1)
1012[ 6.165441] audit: type=1400 audit(141212.810:8): avc: denied { write } for pid=415 comm="touch" name="ld.config.txt" dev="rootfs" ino=14456 scontext=u:r:recovery:s0 tcontext=u:object_r:rootfs:s0 tclass=file permissive=1
1013[ 6.173244] audit: type=1400 audit(141212.816:9): avc: denied { write } for pid=418 comm="setenforce" name="enforce" dev="selinuxfs" ino=4 scontext=u:r:recovery:s0 tcontext=u:object_r:selinuxfs:s0 tclass=file permissive=1
1014[ 6.175202] CHRDEV "usb_rndis" major number 219 goes below the dynamic allocation range
1015[ 6.182831] read descriptors
1016[ 6.182918] read strings
1017[ 6.192749] audit: type=1400 audit(141212.836:10): avc: denied { getattr } for pid=425 comm="qseecomd" path="/sys/devices/platform/soc/7824900.sdhci/mmc_host/mmc0/mmc0:0001/raw_rpmb_size_mult" dev="sysfs" ino=36730 scontext=u:r:recovery:s0 tcontext=u:object_r:sysfs:s0 tclass=file permissive=1
1018[ 6.192820] audit: type=1400 audit(141212.836:11): avc: denied { read } for pid=425 comm="qseecomd" name="raw_rpmb_size_mult" dev="sysfs" ino=36730 scontext=u:r:recovery:s0 tcontext=u:object_r:sysfs:s0 tclass=file permissive=1
1019[ 6.195846] scm_call failed: func id 0x72000206, ret: -1, syscall returns: 0x0, 0x0, 0x0
1020[ 6.195873] QSEECOM: qseecom_register_listener: Service 8192 is registered
1021[ 6.196297] scm_call failed: func id 0x72000206, ret: -1, syscall returns: 0x0, 0x0, 0x0
1022[ 6.196310] QSEECOM: qseecom_register_listener: Service 12288 is registered
1023[ 6.197644] scm_call failed: func id 0x72000206, ret: -1, syscall returns: 0x0, 0x0, 0x0
1024[ 6.197660] QSEECOM: qseecom_register_listener: Service 11 is registered
1025[ 6.198057] scm_call failed: func id 0x72000206, ret: -1, syscall returns: 0x0, 0x0, 0x0
1026[ 6.198068] QSEECOM: qseecom_register_listener: Service 10 is registered
1027[ 6.199845] scm_call failed: func id 0x72000206, ret: -1, syscall returns: 0x0, 0x0, 0x0
1028[ 6.199873] QSEECOM: qseecom_register_listener: Service 28672 is registered
1029[ 6.201482] scm_call failed: func id 0x72000206, ret: -1, syscall returns: 0x0, 0x0, 0x0
1030[ 6.201504] QSEECOM: qseecom_register_listener: Service 36864 is registered
1031[ 6.202279] scm_call failed: func id 0x72000206, ret: -1, syscall returns: 0x0, 0x0, 0x0
1032[ 6.202292] QSEECOM: qseecom_register_listener: Service 4352 is registered
1033[ 6.466440] [FTS] FTS_GESTRUE suspend
1034[ 6.480225] [FTS]tpd_suspend4 0
1035[ 6.480226] [FTS]TPD gesture write 0x01 OK
1036[ 6.480226] [FTS] FTS_GESTRUE suspend end
1037[ 6.480229] [info] fpc_fb_notif_callback value = 9
1038[ 6.682335] i2c-msm-v2 78b7000.i2c: NACK: slave not responding, ensure its powered: msgs(n:2 cur:0 tx) bc(rx:1 tx:1) mode:FIFO slv_addr:0x38 MSTR_STS:0x091343c8 OPER:0x00000010
1039[ 6.682353] ft5435_ts 3-0038: ft5435_i2c_read: i2c read error.
1040[ 6.682353] [FTS]read value fail
1041[ 6.682649] sps: BAM device 0x0000000007884000 is not registered yet.
1042[ 6.683059] sps:BAM 0x0000000007884000 is registered.
1043[ 6.683059] sps:BAM 0x0000000007884000 (va:0x0000000000000000) enabled: ver:0x19, number of pipes:12
1044[ 6.683249] i2c-msm-v2 78b7000.i2c: NACK: slave not responding, ensure its powered: msgs(n:2 cur:1 rx) bc(rx:63 tx:1) mode:DMA slv_addr:0x38 MSTR_STS:0x091343c8 OPER:0x00008010
1045[ 6.683252] i2c-msm-v2 78b7000.i2c: error i2c_msm_dma_xfer_process(n_bufs:2):-1
1046[ 6.683290] ft5435_ts 3-0038: ft5435_i2c_read: i2c read error.
1047[ 6.683292] ft5435_ts 3-0038: ft5435_ts_interrupt: read data fail
1048[ 6.697404] i2c-msm-v2 78b7000.i2c: NACK: slave not responding, ensure its powered: msgs(n:2 cur:0 tx) bc(rx:1 tx:1) mode:FIFO slv_addr:0x38 MSTR_STS:0x0d1300c8 OPER:0x00008010
1049[ 6.697419] ft5435_ts 3-0038: ft5435_i2c_read: i2c read error.
1050[ 6.697420] [FTS]read value fail
1051[ 6.697547] i2c-msm-v2 78b7000.i2c: NACK: slave not responding, ensure its powered: msgs(n:2 cur:1 rx) bc(rx:63 tx:1) mode:DMA slv_addr:0x38 MSTR_STS:0x091343c8 OPER:0x00008010
1052[ 6.697549] i2c-msm-v2 78b7000.i2c: error i2c_msm_dma_xfer_process(n_bufs:2):-1
1053[ 6.697577] ft5435_ts 3-0038: ft5435_i2c_read: i2c read error.
1054[ 6.697579] ft5435_ts 3-0038: ft5435_ts_interrupt: read data fail
1055[ 6.890206] [info] fpc_fb_notif_callback value = 9
1056[ 6.890376] [ft5435]ft5435_change_scanning_frq_switch: Write 0 to 0x8b
1057[ 7.146335] [FTS] FTS_GESTRUE suspend
1058[ 7.160225] [FTS]tpd_suspend4 0
1059[ 7.160226] [FTS]TPD gesture write 0x01 OK
1060[ 7.160227] [FTS] FTS_GESTRUE suspend end
1061[ 7.160228] [info] fpc_fb_notif_callback value = 9
1062[ 7.362338] i2c-msm-v2 78b7000.i2c: NACK: slave not responding, ensure its powered: msgs(n:2 cur:0 tx) bc(rx:1 tx:1) mode:FIFO slv_addr:0x38 MSTR_STS:0x091343c8 OPER:0x00000010
1063[ 7.362355] ft5435_ts 3-0038: ft5435_i2c_read: i2c read error.
1064[ 7.362356] [FTS]read value fail
1065[ 7.362512] i2c-msm-v2 78b7000.i2c: NACK: slave not responding, ensure its powered: msgs(n:2 cur:1 rx) bc(rx:63 tx:1) mode:DMA slv_addr:0x38 MSTR_STS:0x091343c8 OPER:0x00008010
1066[ 7.362515] i2c-msm-v2 78b7000.i2c: error i2c_msm_dma_xfer_process(n_bufs:2):-1
1067[ 7.362548] ft5435_ts 3-0038: ft5435_i2c_read: i2c read error.
1068[ 7.362551] ft5435_ts 3-0038: ft5435_ts_interrupt: read data fail
1069[ 7.377402] i2c-msm-v2 78b7000.i2c: NACK: slave not responding, ensure its powered: msgs(n:2 cur:0 tx) bc(rx:1 tx:1) mode:FIFO slv_addr:0x38 MSTR_STS:0x0d1300c8 OPER:0x00008010
1070[ 7.377417] ft5435_ts 3-0038: ft5435_i2c_read: i2c read error.
1071[ 7.377418] [FTS]read value fail
1072[ 7.377543] i2c-msm-v2 78b7000.i2c: NACK: slave not responding, ensure its powered: msgs(n:2 cur:1 rx) bc(rx:63 tx:1) mode:DMA slv_addr:0x38 MSTR_STS:0x091343c8 OPER:0x00008010
1073[ 7.377546] i2c-msm-v2 78b7000.i2c: error i2c_msm_dma_xfer_process(n_bufs:2):-1
1074[ 7.377573] ft5435_ts 3-0038: ft5435_i2c_read: i2c read error.
1075[ 7.377575] ft5435_ts 3-0038: ft5435_ts_interrupt: read data fail
1076[ 7.570185] [info] fpc_fb_notif_callback value = 9
1077[ 7.570353] [ft5435]ft5435_change_scanning_frq_switch: Write 0 to 0x8b
1078[ 7.683746] EXT4-fs (mmcblk0p27): mounted filesystem with ordered data mode. Opts:
1079[ 7.686649] SELinux: Context u:object_r:persist_time_file:s0 is not valid (left unmapped).
1080[ 7.809607] F2FS-fs (mmcblk0p49): Mounted with checkpoint version = 18e4
1081[ 7.894756] F2FS-fs (mmcblk0p49): Mounted with checkpoint version = 18e5
1082[ 7.903800] mdss_fb_do_ioctl: unsupported ioctl (5401)
1083[ 7.925507] EXT4-fs (mmcblk0p25): mounted filesystem without journal. Opts:
1084[ 7.946843] EXT4-fs (mmcblk0p25): mounted filesystem without journal. Opts:
1085[ 7.955433] SELinux: Context u:object_r:apex_data_file:s0 is not valid (left unmapped).
1086[ 7.955991] SELinux: Context u:object_r:staging_data_file:s0 is not valid (left unmapped).
1087[ 8.130317] SELinux: Context u:object_r:iorapd_data_file:s0 is not valid (left unmapped).
1088[ 8.134769] SELinux: Context u:object_r:seemp_data_file:s0 is not valid (left unmapped).
1089[ 8.136985] SELinux: Context u:object_r:vendor_tombstone_data_file:s0 is not valid (left unmapped).
1090[ 8.138705] SELinux: Context u:object_r:ramdump_vendor_data_file:s0 is not valid (left unmapped).
1091[ 8.138762] SELinux: Context u:object_r:display_vendor_data_file:s0 is not valid (left unmapped).
1092[ 8.138826] SELinux: Context u:object_r:lm_data_file:s0 is not valid (left unmapped).
1093[ 8.138883] SELinux: Context u:object_r:vendor_media_data_file:s0 is not valid (left unmapped).
1094[ 8.138941] SELinux: Context u:object_r:vendor_camera_data_file:s0 is not valid (left unmapped).
1095[ 8.139317] SELinux: Context u:object_r:vendor_qdma_data_file:s0 is not valid (left unmapped).
1096[ 8.139419] SELinux: Context u:object_r:data_tzstorage_file:s0 is not valid (left unmapped).
1097[ 8.139486] SELinux: Context u:object_r:data_qtee_file:s0 is not valid (left unmapped).
1098[ 8.139545] SELinux: Context u:object_r:vendor_ramdump_data_file:s0 is not valid (left unmapped).
1099[ 8.139898] SELinux: Context u:object_r:vendor_bt_data_file:s0 is not valid (left unmapped).
1100[ 8.139957] SELinux: Context u:object_r:wifi_vendor_data_file:s0 is not valid (left unmapped).
1101[ 8.140671] SELinux: Context u:object_r:wifi_vendor_wpa_socket:s0 is not valid (left unmapped).
1102[ 8.141470] SELinux: Context u:object_r:netmgrd_data_file:s0 is not valid (left unmapped).
1103[ 8.142092] SELinux: Context u:object_r:ipa_vendor_data_file:s0 is not valid (left unmapped).
1104[ 8.142379] SELinux: Context u:object_r:vendor_qti_data_file:s0 is not valid (left unmapped).
1105[ 8.142440] SELinux: Context u:object_r:cnd_data_file:s0 is not valid (left unmapped).
1106[ 8.142810] SELinux: Context u:object_r:vendor_audio_data_file:s0 is not valid (left unmapped).
1107[ 8.144248] SELinux: Context u:object_r:vendor_radio_data_file:s0 is not valid (left unmapped).
1108[ 8.145076] SELinux: Context u:object_r:vendor_mbn_data_file:s0 is not valid (left unmapped).
1109[ 8.236768] SELinux: Context u:object_r:location_data_file:s0 is not valid (left unmapped).
1110[ 8.238001] SELinux: Context u:object_r:vendor_time_data_file:s0 is not valid (left unmapped).
1111[ 8.238431] SELinux: Context u:object_r:vendor_fm_data_file:s0 is not valid (left unmapped).
1112[ 8.238491] SELinux: Context u:object_r:mpctl_data_file:s0 is not valid (left unmapped).
1113[ 8.238825] SELinux: Context u:object_r:iop_data_file:s0 is not valid (left unmapped).
1114[ 8.238884] SELinux: Context u:object_r:qti_logkit_priv_data_file:s0 is not valid (left unmapped).
1115[ 8.239321] SELinux: Context u:object_r:qti_logkit_pub_data_file:s0 is not valid (left unmapped).
1116[ 8.239390] SELinux: Context u:object_r:qti_logkit_priv_socket:s0 is not valid (left unmapped).
1117[ 8.239455] SELinux: Context u:object_r:qti_logkit_pub_socket:s0 is not valid (left unmapped).
1118[ 8.239566] SELinux: Context u:object_r:swap_data_file:s0 is not valid (left unmapped).
1119[ 8.239625] SELinux: Context u:object_r:vendor_tui_data_file:s0 is not valid (left unmapped).
1120[ 8.239684] SELinux: Context u:object_r:port_bridge_data_file:s0 is not valid (left unmapped).
1121[ 8.239748] SELinux: Context u:object_r:mediadrm_vendor_data_file:s0 is not valid (left unmapped).
1122[ 8.241598] SELinux: Context u:object_r:face_vendor_data_file:s0 is not valid (left unmapped).
1123[ 8.251984] SELinux: Context u:object_r:privapp_data_file:s0:c512,c768 is not valid (left unmapped).
1124[ 9.226814] of_batterydata_get_best_profile: batterydata-qrd-sunwoda-liwei found
1125[ 9.249256] FG: fg_batt_profile_init: Battery SOC: 29, V: 3751961uV
1126[ 11.129717] audit_printk_skb: 1308 callbacks suppressed
1127[ 11.129720] audit: type=1400 audit(1574588877.274:448): avc: denied { getattr } for pid=414 comm="recovery" path="/data/data/com.topjohnwu.magisk" dev="mmcblk0p49" ino=50067 scontext=u:r:recovery:s0 tcontext=u:object_r:app_data_file:s0:c120,c256,c512,c768 tclass=dir permissive=1
1128[ 11.129757] audit: type=1400 audit(1574588877.274:449): avc: denied { read } for pid=414 comm="recovery" name="com.topjohnwu.magisk" dev="mmcblk0p49" ino=50067 scontext=u:r:recovery:s0 tcontext=u:object_r:app_data_file:s0:c120,c256,c512,c768 tclass=dir permissive=1
1129[ 11.129774] audit: type=1400 audit(1574588877.274:450): avc: denied { open } for pid=414 comm="recovery" path="/data/data/com.topjohnwu.magisk" dev="mmcblk0p49" ino=50067 scontext=u:r:recovery:s0 tcontext=u:object_r:app_data_file:s0:c120,c256,c512,c768 tclass=dir permissive=1
1130[ 11.130921] audit: type=1400 audit(1574588877.277:451): avc: denied { getattr } for pid=414 comm="recovery" path="/data/data/com.topjohnwu.magisk/cache/magisk.zip" dev="mmcblk0p49" ino=50070 scontext=u:r:recovery:s0 tcontext=u:object_r:app_data_file:s0:c120,c256,c512,c768 tclass=file permissive=1
1131[ 11.132928] audit: type=1400 audit(1574588877.277:452): avc: denied { getattr } for pid=414 comm="recovery" path="/data/data/org.kde.kdeconnect_tp" dev="mmcblk0p49" ino=50091 scontext=u:r:recovery:s0 tcontext=u:object_r:app_data_file:s0:c183,c256,c512,c768 tclass=dir permissive=1
1132[ 11.132953] audit: type=1400 audit(1574588877.277:453): avc: denied { read } for pid=414 comm="recovery" name="org.kde.kdeconnect_tp" dev="mmcblk0p49" ino=50091 scontext=u:r:recovery:s0 tcontext=u:object_r:app_data_file:s0:c183,c256,c512,c768 tclass=dir permissive=1
1133[ 11.132970] audit: type=1400 audit(1574588877.277:454): avc: denied { open } for pid=414 comm="recovery" path="/data/data/org.kde.kdeconnect_tp" dev="mmcblk0p49" ino=50091 scontext=u:r:recovery:s0 tcontext=u:object_r:app_data_file:s0:c183,c256,c512,c768 tclass=dir permissive=1
1134[ 11.134042] audit: type=1400 audit(1574588877.280:455): avc: denied { getattr } for pid=414 comm="recovery" path="/data/data/org.kde.kdeconnect_tp/cache/album_art/journal" dev="mmcblk0p49" ino=50095 scontext=u:r:recovery:s0 tcontext=u:object_r:app_data_file:s0:c183,c256,c512,c768 tclass=file permissive=1
1135[ 11.134922] audit: type=1400 audit(1574588877.280:456): avc: denied { getattr } for pid=414 comm="recovery" path="/data/data/com.google.android.trichromelibrary.canary_394100038" dev="mmcblk0p49" ino=50104 scontext=u:r:recovery:s0 tcontext=u:object_r:app_data_file:s0:c168,c256,c512,c768 tclass=dir permissive=1
1136[ 11.134948] audit: type=1400 audit(1574588877.280:457): avc: denied { read } for pid=414 comm="recovery" name="com.google.android.trichromelibrary.canary_394100038" dev="mmcblk0p49" ino=50104 scontext=u:r:recovery:s0 tcontext=u:object_r:app_data_file:s0:c168,c256,c512,c768 tclass=dir permissive=1
1137[ 13.474742] SELinux: Context u:object_r:dropbox_data_file:s0 is not valid (left unmapped).
1138[ 13.508108] SELinux: Context u:object_r:packages_list_file:s0 is not valid (left unmapped).
1139[ 13.556753] SELinux: Context u:object_r:rollback_data_file:s0 is not valid (left unmapped).
1140[ 13.779067] SELinux: Context u:object_r:magisk_file:s0 is not valid (left unmapped).
1141[ 13.781295] SELinux: Context is not valid (left unmapped).
1142[ 13.818669] SELinux: Context u:object_r:gsi_data_file:s0 is not valid (left unmapped).
1143[ 13.818965] SELinux: Context u:object_r:server_configurable_flags_data_file:s0 is not valid (left unmapped).
1144[ 13.819150] SELinux: Context u:object_r:gx_fpd_data_file:s0 is not valid (left unmapped).
1145[ 13.830152] EXT4-fs (mmcblk0p27): mounted filesystem with ordered data mode. Opts:
1146[ 13.848322] FAT-fs (mmcblk0p1): utf8 is not a recommended IO charset for FAT filesystems, filesystem will be case sensitive!
1147[ 15.660312] EXT4-fs (mmcblk0p27): mounted filesystem with ordered data mode. Opts:
1148[ 15.684709] selinux: avc: denied { set } for property=sys.usb.config pid=414 uid=0 gid=0 scontext=u:r:recovery:s0 tcontext=u:object_r:system_radio_prop:s0 tclass=property_service permissive=1
1149[ 15.684709]
1150[ 15.684783] init: processing action (sys.usb.config=none) from (/init.recovery.usb.rc:64)
1151[ 15.685101] init: Command 'write /config/usb_gadget/g1/UDC none' action=sys.usb.config=none (/init.recovery.usb.rc:65) took 0ms and failed: Unable to write to file '/config/usb_gadget/g1/UDC': Unable to write file contents: No such device
1152[ 15.685123] init: Sending signal 9 to service 'adbd' (pid 426) process group...
1153[ 15.710880] libprocessgroup: Successfully killed process cgroup uid 0 pid 426 in 25ms
1154[ 15.711303] init: Service 'adbd' (pid 426) received signal 9
1155[ 15.711906] init: processing action (sys.usb.config=mtp,adb) from (/init.recovery.usb.rc:102)
1156[ 15.711937] init: starting service 'adbd'...
1157[ 15.712943] init: Created socket '/dev/socket/adbd', mode 660, user 1000, group 1000
1158[ 15.717463] read descriptors
1159[ 15.717552] read strings
1160[ 15.717898] init: processing action (sys.usb.config=mtp,adb && sys.usb.ffs.ready=1) from (/init.recovery.usb.rc:105)
1161[ 15.726926] EXT4-fs (mmcblk0p25): mounted filesystem without journal. Opts:
1162[ 16.215842] msm-dwc3 7000000.ssusb: Avail curr from USB = 100
1163[ 16.299779] android_work: sent uevent USB_STATE=CONNECTED
1164[ 16.303547] msm-dwc3 7000000.ssusb: Avail curr from USB = 100
1165[ 16.303569] android_work: sent uevent USB_STATE=DISCONNECTED
1166[ 16.407740] android_work: sent uevent USB_STATE=CONNECTED
1167[ 16.408807] configfs-gadget gadget: high-speed config #1: b
1168[ 16.408920] msm-dwc3 7000000.ssusb: Avail curr from USB = 500
1169[ 16.409189] android_work: sent uevent USB_STATE=CONFIGURED
1170[ 16.515184] audit_printk_skb: 1887 callbacks suppressed
1171[ 16.515186] audit: type=1400 audit(1574588882.660:1087): avc: denied { write } for pid=475 comm="recovery" name="mtp_usb" dev="tmpfs" ino=16483 scontext=u:r:recovery:s0 tcontext=u:object_r:mtp_device:s0 tclass=chr_file permissive=1
1172[ 16.515211] audit: type=1400 audit(1574588882.660:1088): avc: denied { open } for pid=475 comm="recovery" path="/dev/mtp_usb" dev="tmpfs" ino=16483 scontext=u:r:recovery:s0 tcontext=u:object_r:mtp_device:s0 tclass=chr_file permissive=1
1173[ 16.515220] mtp_open
1174[ 16.515425] audit: type=1400 audit(1574588882.660:1089): avc: denied { read } for pid=475 comm="recovery" name="mtp_usb" dev="tmpfs" ino=16483 scontext=u:r:recovery:s0 tcontext=u:object_r:mtp_device:s0 tclass=chr_file permissive=1
1175[ 16.515431] mtp_open
1176[ 16.515435] mtp_open mtp_release not called returning EBUSY
1177[ 16.515444] mtp_release
1178[ 16.515894] audit: type=1400 audit(1574588882.660:1090): avc: denied { getattr } for pid=475 comm="recovery" path="/data/media/0/Pictures" dev="mmcblk0p49" ino=89630 scontext=u:r:recovery:s0 tcontext=u:object_r:media_rw_data_file:s0:c512,c768 tclass=dir permissive=1
1179[ 16.515955] audit: type=1400 audit(1574588882.660:1091): avc: denied { getattr } for pid=475 comm="recovery" path="/data/media/0/Telegram" dev="mmcblk0p49" ino=88470 scontext=u:r:recovery:s0 tcontext=u:object_r:media_rw_data_file:s0:c147,c256,c512,c768 tclass=dir permissive=1
1180[ 16.515998] audit: type=1400 audit(1574588882.660:1092): avc: denied { getattr } for pid=475 comm="recovery" path="/data/media/0/.vkontakte" dev="mmcblk0p49" ino=88844 scontext=u:r:recovery:s0 tcontext=u:object_r:media_rw_data_file:s0:c162,c256,c512,c768 tclass=dir permissive=1
1181[ 16.516075] audit: type=1400 audit(1574588882.660:1093): avc: denied { getattr } for pid=475 comm="recovery" path="/data/media/0/.profig.os" dev="mmcblk0p49" ino=39527 scontext=u:r:recovery:s0 tcontext=u:object_r:media_rw_data_file:s0:c152,c256,c512,c768 tclass=file permissive=1
1182[ 16.516116] audit: type=1400 audit(1574588882.660:1094): avc: denied { getattr } for pid=475 comm="recovery" path="/data/media/0/Download" dev="mmcblk0p49" ino=62492 scontext=u:r:recovery:s0 tcontext=u:object_r:media_rw_data_file:s0:c120,c256,c512,c768 tclass=dir permissive=1
1183[ 17.315570] mtp_open
1184[ 1157.254749] audit: type=1400 audit(1574590023.400:1095): avc: denied { ioctl } for pid=475 comm="recovery" path="/dev/mtp_usb" dev="tmpfs" ino=16483 ioctlcmd=0x4d04 scontext=u:r:recovery:s0 tcontext=u:object_r:mtp_device:s0 tclass=chr_file permissive=1
1185[ 1157.254817] audit: type=1400 audit(1574590023.400:1096): avc: denied { use } for pid=499 comm="kworker/u16:4" path="/data/media/0/console-ramoops-0.log" dev="mmcblk0p49" ino=75125 scontext=u:r:kernel:s0 tcontext=u:r:recovery:s0 tclass=fd permissive=1
1186[ 4076.713648] EXT4-fs (mmcblk0p25): mounted filesystem without journal. Opts:
1187[ 4076.762580] EXT4-fs (mmcblk0p25): mounted filesystem without journal. Opts:
1188[ 4076.768479] audit: type=1400 audit(1574592942.914:1097): avc: denied { getattr } for pid=414 comm="recovery" path="/data/bootchart" dev="mmcblk0p49" ino=5060 scontext=u:r:recovery:s0 tcontext=u:object_r:bootchart_data_file:s0 tclass=dir permissive=1
1189[ 4076.768510] audit: type=1400 audit(1574592942.914:1098): avc: denied { read } for pid=414 comm="recovery" name="bootchart" dev="mmcblk0p49" ino=5060 scontext=u:r:recovery:s0 tcontext=u:object_r:bootchart_data_file:s0 tclass=dir permissive=1
1190[ 4076.768526] audit: type=1400 audit(1574592942.914:1099): avc: denied { open } for pid=414 comm="recovery" path="/data/bootchart" dev="mmcblk0p49" ino=5060 scontext=u:r:recovery:s0 tcontext=u:object_r:bootchart_data_file:s0 tclass=dir permissive=1
1191[ 4076.768826] audit: type=1400 audit(1574592942.914:1100): avc: denied { getattr } for pid=414 comm="recovery" path="/data/misc/recovery" dev="mmcblk0p49" ino=5067 scontext=u:r:recovery:s0 tcontext=u:object_r:recovery_data_file:s0 tclass=dir permissive=1
1192[ 4076.768848] audit: type=1400 audit(1574592942.914:1101): avc: denied { read } for pid=414 comm="recovery" name="recovery" dev="mmcblk0p49" ino=5067 scontext=u:r:recovery:s0 tcontext=u:object_r:recovery_data_file:s0 tclass=dir permissive=1
1193[ 4076.768862] audit: type=1400 audit(1574592942.914:1102): avc: denied { open } for pid=414 comm="recovery" path="/data/misc/recovery" dev="mmcblk0p49" ino=5067 scontext=u:r:recovery:s0 tcontext=u:object_r:recovery_data_file:s0 tclass=dir permissive=1
1194[ 4076.768980] audit: type=1400 audit(1574592942.914:1103): avc: denied { getattr } for pid=414 comm="recovery" path="/data/misc/bluedroid" dev="mmcblk0p49" ino=5073 scontext=u:r:recovery:s0 tcontext=u:object_r:bluetooth_data_file:s0 tclass=dir permissive=1
1195[ 4076.769002] audit: type=1400 audit(1574592942.914:1104): avc: denied { read } for pid=414 comm="recovery" name="bluedroid" dev="mmcblk0p49" ino=5073 scontext=u:r:recovery:s0 tcontext=u:object_r:bluetooth_data_file:s0 tclass=dir permissive=1
1196[ 4076.769017] audit: type=1400 audit(1574592942.914:1105): avc: denied { open } for pid=414 comm="recovery" path="/data/misc/bluedroid" dev="mmcblk0p49" ino=5073 scontext=u:r:recovery:s0 tcontext=u:object_r:bluetooth_data_file:s0 tclass=dir permissive=1
1197[ 4076.769115] audit: type=1400 audit(1574592942.914:1106): avc: denied { getattr } for pid=414 comm="recovery" path="/data/misc/bluetooth/logs" dev="mmcblk0p49" ino=5077 scontext=u:r:recovery:s0 tcontext=u:object_r:bluetooth_logs_data_file:s0 tclass=dir permissive=1
1198[ 4077.773210] FAT-fs (mmcblk0p1): utf8 is not a recommended IO charset for FAT filesystems, filesystem will be case sensitive!
1199[ 4460.548356] SELinux: Context u:object_r:persist_bms_file:s0 is not valid (left unmapped).
1200[ 4460.549793] SELinux: Context u:object_r:persist_secnvm_file:s0 is not valid (left unmapped).
1201[ 4460.550840] SELinux: Context u:object_r:persist_drm_file:s0 is not valid (left unmapped).
1202[ 4460.552226] SELinux: Context u:object_r:persist_alarm_file:s0 is not valid (left unmapped).
1203[ 4460.552904] SELinux: Context u:object_r:persist_hvdcp_file:s0 is not valid (left unmapped).
1204[ 4460.553528] SELinux: Context u:object_r:sensors_persist_file:s0 is not valid (left unmapped).
1205[ 4460.558917] SELinux: Context u:object_r:persist_bluetooth_file:s0 is not valid (left unmapped).
1206[ 4460.568045] SELinux: Context u:object_r:persist_vpp_file:s0 is not valid (left unmapped).
1207[ 4460.568671] SELinux: Context u:object_r:persist_qti_fp_file:s0 is not valid (left unmapped).
1208[ 4460.569271] SELinux: Context u:object_r:persist_display_file:s0 is not valid (left unmapped).
1209[ 4460.569881] SELinux: Context u:object_r:persist_rfs_shared_hlos_file:s0 is not valid (left unmapped).
1210[ 4460.571271] SELinux: Context u:object_r:persist_rfs_file:s0 is not valid (left unmapped).
1211[ 4460.577154] SELinux: Context u:object_r:persist_misc_file:s0 is not valid (left unmapped).
1212[ 4460.577871] SELinux: Context u:object_r:vendor_persist_mmi_file:s0 is not valid (left unmapped).
1213[ 4465.850403] audit_printk_skb: 1821 callbacks suppressed
1214[ 4465.850405] audit: type=1400 audit(1574593331.997:1714): avc: denied { read } for pid=414 comm="recovery" name="temp" dev="sysfs" ino=21747 scontext=u:r:recovery:s0 tcontext=u:object_r:sysfs:s0 tclass=file permissive=1
1215[ 4465.850437] audit: type=1400 audit(1574593331.997:1715): avc: denied { open } for pid=414 comm="recovery" path="/sys/devices/virtual/thermal/thermal_zone0/temp" dev="sysfs" ino=21747 scontext=u:r:recovery:s0 tcontext=u:object_r:sysfs:s0 tclass=file permissive=1
1216[ 4465.850472] audit: type=1400 audit(1574593331.997:1716): avc: denied { getattr } for pid=414 comm="recovery" path="/sys/devices/virtual/thermal/thermal_zone0/temp" dev="sysfs" ino=21747 scontext=u:r:recovery:s0 tcontext=u:object_r:sysfs:s0 tclass=file permissive=1
1217[ 4520.541697] audit: type=1400 audit(1574593386.691:1717): avc: denied { read } for pid=414 comm="recovery" scontext=u:r:recovery:s0 tcontext=u:r:recovery:s0 tclass=netlink_kobject_uevent_socket permissive=1
1218[ 4643.332301] audit: type=1400 audit(1574593509.477:1718): avc: denied { getattr } for pid=475 comm="recovery" path="/data/media/0/recovery_dmesg.log" dev="mmcblk0p49" ino=75127 scontext=u:r:recovery:s0 tcontext=u:object_r:media_rw_data_file:s0 tclass=file permissive=1
1219[ 4643.332382] audit: type=1400 audit(1574593509.477:1719): avc: denied { ioctl } for pid=475 comm="recovery" path="/dev/mtp_usb" dev="tmpfs" ino=16483 ioctlcmd=0x4d03 scontext=u:r:recovery:s0 tcontext=u:object_r:mtp_device:s0 tclass=chr_file permissive=1