ted3Bh0p

1
2
3coreboot-v4.11.0.3-57-gba91eca881-v4.10.0.2 Mon Feb 24 09:08:34 UTC 2020 bootblock starting (log level: 7)...
4FMAP: area COREBOOT found @ 194000 (6733824 bytes)
5CBFS: Locating 'fallback/romstage'
6CBFS: Found @ offset 80 size d764
7BS: bootblock times (exec / console): total (unknown) / 11 ms
8
9
10coreboot-v4.11.0.3-57-gba91eca881-v4.10.0.2 Mon Feb 24 09:08:34 UTC 2020 romstage starting (log level: 7)...
11APIC 00: CPU Family_Model = 00730f01
12
13APIC 00: ** Enter AmdInitReset [00028000]
14FMAP: area COREBOOT found @ 194000 (6733824 bytes)
15CBFS: Locating 'bootorder'
16CBFS: 'bootorder' not found.
17file [bootorder] not found in CBFS
18Missing bootorder data.
19Missing or invalid scon knob, enable console.
20PC Engines apu2
21coreboot build 20202402
22BIOS version v4.10.0.2
23FMAP: area COREBOOT found @ 194000 (6733824 bytes)
24CBFS: Locating 'bootorder'
25CBFS: 'bootorder' not found.
26file [bootorder] not found in CBFS
27Missing bootorder data.
28Missing or invalid mpcie2_clk knob, forcing CLK of mPCIe2 slot is not enabled.
29Fch OEM config in INIT RESET
30Fch OEM config in INIT RESET Done
31AmdInitReset() returned AGESA_SUCCESS
32APIC 00: Heap in LocalCache (2) at 0x00400000
33APIC 00: ** Exit  AmdInitReset [00028000]
34
35APIC 00: ** Enter AmdInitEarly [00023000]
36FMAP: area COREBOOT found @ 194000 (6733824 bytes)
37CBFS: Locating 'bootorder'
38CBFS: 'bootorder' not found.
39file [bootorder] not found in CBFS
40Missing bootorder data.
41Missing or invalid boost knob, disable CPU boost.
42FMAP: area COREBOOT found @ 194000 (6733824 bytes)
43CBFS: Locating 'bootorder'
44CBFS: 'bootorder' not found.
45file [bootorder] not found in CBFS
46Missing bootorder data.
47Watchdog is enabled, state = 0x1, time = 65535
48AmdInitEarly() returned AGESA_SUCCESS
49APIC 00: Heap in LocalCache (2) at 0x00400000
50APIC 00: ** Exit  AmdInitEarly [00023000]
51
52APIC 00: ** Enter AmdInitPost [00027000]
53FMAP: area COREBOOT found @ 194000 (6733824 bytes)
54CBFS: Locating 'spd.bin'
55CBFS: Found @ offset 20a00 size 100
56AmdInitPost() returned AGESA_SUCCESS
57APIC 00: Heap in TempMem (3) at 0x000b0000
58APIC 00: ** Exit  AmdInitPost [00027000]
59CBMEM:
60IMD: root @ 0xcffff000 254 entries.
61IMD: root @ 0xcfffec00 62 entries.
62MTRR Range: Start=0 End=80000000 (Size 80000000)
63MTRR Range: Start=80000000 End=c0000000 (Size 40000000)
64MTRR Range: Start=c0000000 End=d0000000 (Size 10000000)
65MTRR Range: Start=ff800000 End=0 (Size 800000)
66Found TPM SLB9665 TT 2.0 by Infineon
67tlcl_send_startup: Startup return code is 0
68TPM: setup succeeded
69src/security/tpm/tss/tcg-2.0/tss.c:219 index 0x1007 return code 0
70TCPA: Clearing coreboot TCPA log
71FMAP: area COREBOOT found @ 194000 (6733824 bytes)
72CBFS: Locating 'bootblock'
73CBFS: Found @ offset 663fc0 size 8000
74FMAP: area COREBOOT found @ 194000 (6733824 bytes)
75tlcl_extend: response is 0
76TPM: Measured FMAP: COREBOOT CBFS: bootblock into PCR 2
77FMAP: area COREBOOT found @ 194000 (6733824 bytes)
78CBFS: Locating 'fallback/romstage'
79CBFS: Found @ offset 80 size d764
80FMAP: area COREBOOT found @ 194000 (6733824 bytes)
81tlcl_extend: response is 0
82TPM: Measured FMAP: COREBOOT CBFS: fallback/romstage into PCR 2
83Phase 1
84FMAP: area GBB found @ a5000 (978944 bytes)
85VB2:vb2_check_recovery() Recovery reason from previous boot: 0x0 / 0x0
86VB2:vb2_check_recovery() Recovery was requested manually
87VB2:vb2_check_recovery() We have a recovery request: 0x2 / 0x0
88Recovery requested (1009000e)
89tlcl_extend: response is 0
90tlcl_extend: response is 0
91FMAP: area COREBOOT found @ 194000 (6733824 bytes)
92CBFS: Locating 'fallback/postcar'
93CBFS: Found @ offset 20b40 size 7b54
94FMAP: area COREBOOT found @ 194000 (6733824 bytes)
95tlcl_extend: response is 0
96TPM: Measured FMAP: COREBOOT CBFS: fallback/postcar into PCR 2
97Decompressing stage fallback/postcar @ 0xcffa2fc0 (47912 bytes)
98Loading module at 0xcffa3000 with entry 0xcffa3000. filesize: 0x75d0 memsize: 0xbae8
99Processing 330 relocs. Offset value of 0xcdfa3000
100BS: romstage times (exec / console): total (unknown) / 166 ms
101
102
103coreboot-v4.11.0.3-57-gba91eca881-v4.10.0.2 Mon Feb 24 09:08:34 UTC 2020 postcar starting (log level: 7)...
104FMAP: area COREBOOT found @ 194000 (6733824 bytes)
105CBFS: Locating 'fallback/ramstage'
106CBFS: Found @ offset d880 size 12bd7
107FMAP: area COREBOOT found @ 194000 (6733824 bytes)
108Found TPM SLB9665 TT 2.0 by Infineon
109tlcl_extend: response is 0
110TPM: Measured FMAP: COREBOOT CBFS: fallback/ramstage into PCR 2
111Decompressing stage fallback/ramstage @ 0xcfeb0fc0 (985368 bytes)
112Loading module at 0xcfeb1000 with entry 0xcfeb1000. filesize: 0x26150 memsize: 0xf08d8
113Processing 2754 relocs. Offset value of 0xcf0b1000
114BS: postcar times (exec / console): total (unknown) / 28 ms
115
116
117coreboot-v4.11.0.3-57-gba91eca881-v4.10.0.2 Mon Feb 24 09:08:34 UTC 2020 ramstage starting (log level: 7)...
118FMAP: area COREBOOT found @ 194000 (6733824 bytes)
119CBFS: Locating 'AGESA'
120CBFS: Found @ offset 46bfc0 size 7b0e0
121FMAP: area COREBOOT found @ 194000 (6733824 bytes)
122Found TPM SLB9665 TT 2.0 by Infineon
123tlcl_extend: response is 0
124TPM: Measured FMAP: COREBOOT CBFS: AGESA into PCR 2
125
126APIC 00: ** Enter AmdInitEnv [00024000]
127Wiped HEAP at [10000000 - 1002ffff]
128Fch OEM config in INIT ENV
129Fch OEM config in INIT ENV Done
130AmdInitEnv() returned AGESA_SUCCESS
131APIC 00: Heap in SystemMem (4) at 0x10000014
132APIC 00: ** Exit  AmdInitEnv [00024000]
133BS: BS_PRE_DEVICE entry times (exec / console): 127 / 25 ms
134Enumerating buses...
135Mainboard apu2 Enable.
136FMAP: area COREBOOT found @ 194000 (6733824 bytes)
137CBFS: Locating 'bootorder'
138CBFS: 'bootorder' not found.
139file [bootorder] not found in CBFS
140Missing bootorder data.
141Missing or invalid scon knob, enable console.
142FMAP: area COREBOOT found @ 194000 (6733824 bytes)
143CBFS: Locating 'bootorder'
144CBFS: 'bootorder' not found.
145file [bootorder] not found in CBFS
146Missing bootorder data.
147Missing or invalid uart knob, disable port.
148UARTC disabled
149FMAP: area COREBOOT found @ 194000 (6733824 bytes)
150CBFS: Locating 'bootorder'
151CBFS: 'bootorder' not found.
152file [bootorder] not found in CBFS
153Missing bootorder data.
154Missing or invalid uart knob, disable port.
155UARTD disabled
156setup_bsp_ramtop, TOP MEM: msr.lo = 0xd0000000, msr.hi = 0x00000000
157setup_bsp_ramtop, TOP MEM2: msr.lo = 0x2f000000, msr.hi = 0x00000001
1584080 MBFMAP: area COREBOOT found @ 194000 (6733824 bytes)
159CBFS: Locating 'spd.bin'
160CBFS: Found @ offset 20a00 size 100
161FMAP: area COREBOOT found @ 194000 (6733824 bytes)
162tlcl_extend: response is 0
163TPM: Measured FMAP: COREBOOT CBFS: spd.bin into PCR 2
164 ECC DRAM
165
166Measuring AMD blobs.
167FMAP: area PSPDIR found @ 20000 (524288 bytes)
168tlcl_extend: response is 0
169TPM: Measured PSPDIR into PCR 3
170FMAP: area COREBOOT found @ 194000 (6733824 bytes)
171CBFS: Locating 'bootorder'
172CBFS: 'bootorder' not found.
173file [bootorder] not found in CBFS
174Missing bootorder data.
175Missing or invalid sd3mode knob. Disable SD3.0 mode.
176FMAP: area COREBOOT found @ 194000 (6733824 bytes)
177CBFS: Locating 'bootorder'
178CBFS: 'bootorder' not found.
179file [bootorder] not found in CBFS
180Missing bootorder data.
181Missing or invalid iommu knob, disable IOMMU.
182Root Device scanning...
183setup_bsp_ramtop, TOP MEM: msr.lo = 0xd0000000, msr.hi = 0x00000000
184setup_bsp_ramtop, TOP MEM2: msr.lo = 0x2f000000, msr.hi = 0x00000001
185CPU_CLUSTER: 0 enabled
186DOMAIN: 0000 enabled
187CPU_CLUSTER: 0 scanning...
188CPU: APIC: 00 enabled
189CPU: APIC: 01 enabled
190CPU: APIC: 02 enabled
191CPU: APIC: 03 enabled
192scan_bus: bus CPU_CLUSTER: 0 finished in 4 msecs
193DOMAIN: 0000 scanning...
194PCI: pci_scan_bus for bus 00
195PCI: 00:00.0 [1022/1566] enabled
196PCI: 00:00.2 [1022/1567] enabled
197PCI: 00:02.0 [1022/156b] enabled
198PCI: Static device PCI: 00:02.1 not found, disabling it.
199PCI: 00:02.2 subordinate bus PCI Express
200PCI: 00:02.2 [1022/1439] enabled
201PCI: 00:02.3 subordinate bus PCI Express
202PCI: 00:02.3 [1022/1439] enabled
203PCI: 00:02.4 subordinate bus PCI Express
204PCI: 00:02.4 [1022/1439] enabled
205PCI: 00:02.5 subordinate bus PCI Express
206PCI: 00:02.5 [1022/1439] enabled
207PCI: 00:08.0 [1022/1537] enabled
208hudson_enable()
209PCI: 00:10.0 [1022/7814] enabled
210hudson_enable()
211PCI: 00:11.0 [1022/7800] enabled
212hudson_enable()
213hudson_enable()
214PCI: 00:13.0 [1022/7808] enabled
215hudson_enable()
216PCI: 00:14.0 [1022/780b] enabled
217hudson_enable()
218PCI: 00:14.3 [1022/780e] enabled
219hudson_enable()
220PCI: 00:14.7 [1022/7813] enabled
221hudson_enable()
222PCI: Static device PCI: 00:16.0 not found, disabling it.
223PCI: 00:18.0 [1022/1580] enabled
224PCI: 00:18.1 [1022/1581] enabled
225PCI: 00:18.2 [1022/1582] enabled
226PCI: 00:18.3 [1022/1583] enabled
227PCI: 00:18.4 [1022/1584] enabled
228PCI: 00:18.5 [1022/1585] enabled
229PCI: Leftover static devices:
230PCI: 00:01.0
231PCI: 00:01.1
232PCI: 00:02.1
233PCI: 00:12.0
234PCI: 00:16.0
235PCI: Check your devicetree.cb.
236PCI: 00:02.2 scanning...
237PCI: pci_scan_bus for bus 01
238PCI: 01:00.0 [8086/157b] enabled
239PCIe: Max_Payload_Size adjusted to 512
240Failed to enable LTR for dev = PCI: 01:00.0
241scan_bus: bus PCI: 00:02.2 finished in 6 msecs
242PCI: 00:02.3 scanning...
243PCI: pci_scan_bus for bus 02
244PCI: 02:00.0 [8086/157b] enabled
245PCIe: Max_Payload_Size adjusted to 512
246Failed to enable LTR for dev = PCI: 02:00.0
247scan_bus: bus PCI: 00:02.3 finished in 6 msecs
248PCI: 00:02.4 scanning...
249PCI: pci_scan_bus for bus 03
250PCI: 03:00.0 [8086/157b] enabled
251PCIe: Max_Payload_Size adjusted to 512
252Failed to enable LTR for dev = PCI: 03:00.0
253scan_bus: bus PCI: 00:02.4 finished in 6 msecs
254PCI: 00:02.5 scanning...
255PCI: pci_scan_bus for bus 04
256PCI: 04:00.0 [168c/003c] enabled
257PCIe: Max_Payload_Size adjusted to 256
258Failed to enable LTR for dev = PCI: 04:00.0
259scan_bus: bus PCI: 00:02.5 finished in 6 msecs
260PCI: 00:14.0 scanning...
261scan_bus: bus PCI: 00:14.0 finished in 0 msecs
262PCI: 00:14.3 scanning...
263PNP: 002e.0 disabled
264PNP: 002e.2 enabled
265PNP: 002e.3 enabled
266PNP: 002e.10 disabled
267PNP: 002e.11 disabled
268PNP: 002e.8 disabled
269PNP: 002e.108 enabled
270PNP: 002e.7 enabled
271PNP: 002e.107 enabled
272PNP: 002e.607 disabled
273PNP: 002e.e disabled
274PNP: 002e.f enabled
275PNP: 0c31.0 enabled
276PNP: 002e.14 enabled
277scan_bus: bus PCI: 00:14.3 finished in 13 msecs
278scan_bus: bus DOMAIN: 0000 finished in 116 msecs
279scan_bus: bus Root Device finished in 136 msecs
280done
281BS: BS_DEV_ENUMERATE run times (exec / console): 94 / 215 ms
282Allocating resources...
283Reading resources...
284fx_devs = 0x1
285Adding PCIe enhanced config space BAR 0xf8000000-0xfc000000.
286Done reading resources.
287Setting resources...
288node 0: mmio_basek=00340000, basek=00400000, limitk=004a0000
289PCI: 00:00.2 44 <- [0x00f7e00000 - 0x00f7e7ffff] size 0x00080000 gran 0x13 mem
290PCI: 00:02.2 1c <- [0x0000001000 - 0x0000001fff] size 0x00001000 gran 0x0c bus 01 io
291PCI: 00:02.2 24 <- [0x00f7ffffff - 0x00f7fffffe] size 0x00000000 gran 0x14 bus 01 prefmem
292PCI: 00:02.2 20 <- [0x00f7900000 - 0x00f79fffff] size 0x00100000 gran 0x14 bus 01 mem
293PCI: 01:00.0 10 <- [0x00f7900000 - 0x00f791ffff] size 0x00020000 gran 0x11 mem
294PCI: 01:00.0 18 <- [0x0000001000 - 0x000000101f] size 0x00000020 gran 0x05 io
295PCI: 01:00.0 1c <- [0x00f7920000 - 0x00f7923fff] size 0x00004000 gran 0x0e mem
296PCI: 00:02.3 1c <- [0x0000002000 - 0x0000002fff] size 0x00001000 gran 0x0c bus 02 io
297PCI: 00:02.3 24 <- [0x00f7ffffff - 0x00f7fffffe] size 0x00000000 gran 0x14 bus 02 prefmem
298PCI: 00:02.3 20 <- [0x00f7a00000 - 0x00f7afffff] size 0x00100000 gran 0x14 bus 02 mem
299PCI: 02:00.0 10 <- [0x00f7a00000 - 0x00f7a1ffff] size 0x00020000 gran 0x11 mem
300PCI: 02:00.0 18 <- [0x0000002000 - 0x000000201f] size 0x00000020 gran 0x05 io
301PCI: 02:00.0 1c <- [0x00f7a20000 - 0x00f7a23fff] size 0x00004000 gran 0x0e mem
302PCI: 00:02.4 1c <- [0x0000003000 - 0x0000003fff] size 0x00001000 gran 0x0c bus 03 io
303PCI: 00:02.4 24 <- [0x00f7ffffff - 0x00f7fffffe] size 0x00000000 gran 0x14 bus 03 prefmem
304PCI: 00:02.4 20 <- [0x00f7b00000 - 0x00f7bfffff] size 0x00100000 gran 0x14 bus 03 mem
305PCI: 03:00.0 10 <- [0x00f7b00000 - 0x00f7b1ffff] size 0x00020000 gran 0x11 mem
306PCI: 03:00.0 18 <- [0x0000003000 - 0x000000301f] size 0x00000020 gran 0x05 io
307PCI: 03:00.0 1c <- [0x00f7b20000 - 0x00f7b23fff] size 0x00004000 gran 0x0e mem
308PCI: 00:02.5 1c <- [0x000000ffff - 0x000000fffe] size 0x00000000 gran 0x0c bus 04 io
309PCI: 00:02.5 24 <- [0x00f7ffffff - 0x00f7fffffe] size 0x00000000 gran 0x14 bus 04 prefmem
310PCI: 00:02.5 20 <- [0x00f7600000 - 0x00f78fffff] size 0x00300000 gran 0x14 bus 04 mem
311PCI: 04:00.0 10 <- [0x00f7600000 - 0x00f77fffff] size 0x00200000 gran 0x15 mem64
312PCI: 04:00.0 30 <- [0x00f7800000 - 0x00f780ffff] size 0x00010000 gran 0x10 romem
313PCI: 00:08.0 10 <- [0x00f7e80000 - 0x00f7e9ffff] size 0x00020000 gran 0x11 prefmem64
314PCI: 00:08.0 18 <- [0x00f7c00000 - 0x00f7cfffff] size 0x00100000 gran 0x14 mem
315PCI: 00:08.0 1c <- [0x00f7ea4000 - 0x00f7ea4fff] size 0x00001000 gran 0x0c mem
316PCI: 00:08.0 20 <- [0x00f7d00000 - 0x00f7dfffff] size 0x00100000 gran 0x14 mem
317PCI: 00:08.0 24 <- [0x00f7ea0000 - 0x00f7ea1fff] size 0x00002000 gran 0x0d mem
318PCI: 00:10.0 10 <- [0x00f7ea2000 - 0x00f7ea3fff] size 0x00002000 gran 0x0d mem64
319PCI: 00:11.0 10 <- [0x0000004010 - 0x0000004017] size 0x00000008 gran 0x03 io
320PCI: 00:11.0 14 <- [0x0000004020 - 0x0000004023] size 0x00000004 gran 0x02 io
321PCI: 00:11.0 18 <- [0x0000004018 - 0x000000401f] size 0x00000008 gran 0x03 io
322PCI: 00:11.0 1c <- [0x0000004024 - 0x0000004027] size 0x00000004 gran 0x02 io
323PCI: 00:11.0 20 <- [0x0000004000 - 0x000000400f] size 0x00000010 gran 0x04 io
324PCI: 00:11.0 24 <- [0x00f7ea5000 - 0x00f7ea53ff] size 0x00000400 gran 0x0a mem
325PCI: 00:13.0 10 <- [0x00f7ea6000 - 0x00f7ea60ff] size 0x00000100 gran 0x08 mem
326PNP: 002e.2 60 <- [0x00000003f8 - 0x00000003ff] size 0x00000008 gran 0x03 io
327PNP: 002e.2 70 <- [0x0000000004 - 0x0000000004] size 0x00000001 gran 0x00 irq
328PNP: 002e.3 60 <- [0x00000002f8 - 0x00000002ff] size 0x00000008 gran 0x03 io
329PNP: 002e.3 70 <- [0x0000000003 - 0x0000000003] size 0x00000001 gran 0x00 irq
330PNP: 002e.108 60 <- [0x0000000220 - 0x0000000227] size 0x00000008 gran 0x03 io
331PCI: 00:14.7 10 <- [0x00f7ea7000 - 0x00f7ea70ff] size 0x00000100 gran 0x08 mem64
332Done setting resources.
333Done allocating resources.
334BS: BS_DEV_RESOURCES run times (exec / console): 1 / 170 ms
335
336APIC 00: ** Enter AmdInitMid [00026000]
337AmdInitMid() returned AGESA_SUCCESS
338APIC 00: Heap in SystemMem (4) at 0x10000014
339APIC 00: ** Exit  AmdInitMid [00026000]
340PCI_INTR tables: Writing registers C00/C01 for PIC mode PCI IRQ routing:
341	PCI_INTR_INDEX		PCI_INTR_DATA
342	0x00 INTA#		: 0x03
343	0x01 INTB#		: 0x03
344	0x02 INTC#		: 0x05
345	0x03 INTD#		: 0x07
346	0x04 INTE#		: 0x0B
347	0x05 INTF#		: 0x0A
348	0x06 INTG#		: 0x1F
349	0x07 INTH#		: 0x1F
350	0x08 Misc		: 0xFA
351	0x09 Misc0		: 0xF1
352	0x0A Misc1		: 0x00
353	0x0B Misc2		: 0x00
354	0x0C Ser IRQ INTA	: 0x1F
355	0x0D Ser IRQ INTB	: 0x1F
356	0x0E Ser IRQ INTC	: 0x1F
357	0x0F Ser IRQ INTD	: 0x1F
358	0x10 SCI		: 0x1F
359	0x11 SMBUS0		: 0x1F
360	0x12 ASF		: 0x1F
361	0x13 HDA		: 0x1F
362	0x14 FC			: 0x1F
363	0x15 GEC		: 0x1F
364	0x16 PerMon		: 0x1F
365	0x17 SD			: 0x1F
366	0x20 IMC INT0		: 0x1F
367	0x21 IMC INT1		: 0x1F
368	0x22 IMC INT2		: 0x1F
369	0x23 IMC INT3		: 0x1F
370	0x24 IMC INT4		: 0x1F
371	0x25 IMC INT5		: 0x1F
372	0x30 Dev18.0 INTA	: 0x05
373	0x31 Dev18.2 INTB	: 0x1F
374	0x32 Dev19.0 INTA	: 0x05
375	0x33 Dev19.2 INTB	: 0x1F
376	0x34 Dev22.0 INTA	: 0x04
377	0x35 Dev22.2 INTB	: 0x1F
378	0x36 Dev20.5 INTC	: 0x1F
379	0x40 RSVD		: 0x1F
380	0x41 SATA		: 0x1F
381	0x60 RSVD		: 0x00
382	0x61 RSVD		: 0x00
383	0x62 GPIO		: 0x07
384PCI_INTR tables: Writing registers C00/C01 for APIC mode PCI IRQ routing:
385	PCI_INTR_INDEX		PCI_INTR_DATA
386	0x00 INTA#		: 0x10
387	0x01 INTB#		: 0x10
388	0x02 INTC#		: 0x12
389	0x03 INTD#		: 0x13
390	0x04 INTE#		: 0x14
391	0x05 INTF#		: 0x15
392	0x06 INTG#		: 0x1F
393	0x07 INTH#		: 0x1F
394	0x08 Misc		: 0x00
395	0x09 Misc0		: 0x00
396	0x0A Misc1		: 0x00
397	0x0B Misc2		: 0x00
398	0x0C Ser IRQ INTA	: 0x1F
399	0x0D Ser IRQ INTB	: 0x1F
400	0x0E Ser IRQ INTC	: 0x1F
401	0x0F Ser IRQ INTD	: 0x1F
402	0x10 SCI		: 0x09
403	0x11 SMBUS0		: 0x1F
404	0x12 ASF		: 0x1F
405	0x13 HDA		: 0x1F
406	0x14 FC			: 0x1F
407	0x15 GEC		: 0x1F
408	0x16 PerMon		: 0x1F
409	0x17 SD			: 0x10
410	0x20 IMC INT0		: 0x05
411	0x21 IMC INT1		: 0x1F
412	0x22 IMC INT2		: 0x1F
413	0x23 IMC INT3		: 0x1F
414	0x24 IMC INT4		: 0x1F
415	0x25 IMC INT5		: 0x1F
416	0x30 Dev18.0 INTA	: 0x12
417	0x31 Dev18.2 INTB	: 0x1F
418	0x32 Dev19.0 INTA	: 0x12
419	0x33 Dev19.2 INTB	: 0x1F
420	0x34 Dev22.0 INTA	: 0x12
421	0x35 Dev22.2 INTB	: 0x1F
422	0x36 Dev20.5 INTC	: 0x1F
423	0x40 RSVD		: 0x1F
424	0x41 SATA		: 0x13
425	0x60 RSVD		: 0x00
426	0x61 RSVD		: 0x00
427	0x62 GPIO		: 0x07
428PCI_CFG IRQ: Write PCI config space IRQ assignments
429PCI_CFG IRQ: Finished writing PCI config space IRQ assignments
430BS: BS_DEV_ENABLE entry times (exec / console): 23 / 105 ms
431Enabling resources...
432PCI: 00:00.0 cmd <- 04
433PCI: 00:00.2 subsystem <- 1022/1410
434PCI: 00:00.2 cmd <- 06
435PCI: 00:02.0 subsystem <- 1022/1410
436PCI: 00:02.0 cmd <- 00
437PCI: 00:02.2 bridge ctrl <- 0013
438PCI: 00:02.2 cmd <- 07
439PCI: 00:02.3 bridge ctrl <- 0013
440PCI: 00:02.3 cmd <- 07
441PCI: 00:02.4 bridge ctrl <- 0013
442PCI: 00:02.4 cmd <- 07
443PCI: 00:02.5 bridge ctrl <- 0013
444PCI: 00:02.5 cmd <- 06
445PCI: 00:08.0 subsystem <- 1022/1410
446PCI: 00:08.0 cmd <- 02
447PCI: 00:10.0 subsystem <- 1022/1410
448PCI: 00:10.0 cmd <- 02
449PCI: 00:11.0 cmd <- 07
450PCI: 00:13.0 subsystem <- 1022/1410
451PCI: 00:13.0 cmd <- 02
452PCI: 00:14.0 subsystem <- 1022/1410
453PCI: 00:14.0 cmd <- 403
454PCI: 00:14.3 subsystem <- 1022/1410
455PCI: 00:14.3 cmd <- 0f
456hudson lpc decode:PNP: 002e.2, base=0x000003f8, end=0x000003ff
457hudson lpc decode:PNP: 002e.3, base=0x000002f8, end=0x000002ff
458hudson lpc decode:PNP: 002e.108, base=0x00000220, end=0x00000227
459PCI: 00:14.7 cmd <- 06
460PCI: 00:18.0 subsystem <- 1022/1410
461PCI: 00:18.0 cmd <- 00
462PCI: 00:18.1 subsystem <- 1022/1410
463PCI: 00:18.1 cmd <- 00
464PCI: 00:18.2 subsystem <- 1022/1410
465PCI: 00:18.2 cmd <- 00
466PCI: 00:18.3 subsystem <- 1022/1410
467PCI: 00:18.3 cmd <- 00
468PCI: 00:18.4 subsystem <- 1022/1410
469PCI: 00:18.4 cmd <- 00
470PCI: 00:18.5 subsystem <- 1022/1410
471PCI: 00:18.5 cmd <- 00
472PCI: 01:00.0 cmd <- 03
473PCI: 02:00.0 cmd <- 03
474PCI: 03:00.0 cmd <- 03
475PCI: 04:00.0 cmd <- 02
476done.
477BS: BS_DEV_ENABLE run times (exec / console): 0 / 62 ms
478Initializing devices...
479Root Device init
480Root Device init finished in 0 msecs
481CPU_CLUSTER: 0 init
482start_eip=0x00001000, code_size=0x00000031
483Initializing CPU #0
484CPU: vendor AMD device 730f01
485CPU: family 16, model 30, stepping 01
486Model 16 Init.
487
488MTRR check
489Fixed MTRRs   : Enabled
490Variable MTRRs: Enabled
491
492Enabling cache
493Setting up local APIC...
494 apic_id: 0x00 done.
495siblings = 03, FMAP: area COREBOOT found @ 194000 (6733824 bytes)
496CBFS: Locating 'cpu_microcode_blob.bin'
497CBFS: 'cpu_microcode_blob.bin' not found.
498cpu_microcode_blob.bin not found. Skipping updates.
499CPU #0 initialized
500Initializing CPU #1
501CPU: vendor AMD device 730f01
502CPU: family 16, model 30, stepping 01
503Model 16 Init.
504
505MTRR check
506Fixed MTRRs   : Enabled
507Variable MTRRs: Enabled
508
509Enabling cache
510Setting up local APIC...
511 apic_id: 0x01 done.
512siblings = 03, FMAP: area COREBOOT found @ 194000 (6733824 bytes)
513CBFS: Locating 'cpu_microcode_blob.bin'
514CBFS: 'cpu_microcode_blob.bin' not found.
515cpu_microcode_blob.bin not found. Skipping updates.
516CPU #1 initialized
517Initializing CPU #2
518CPU: vendor AMD device 730f01
519CPU: family 16, model 30, stepping 01
520Model 16 Init.
521
522MTRR check
523Fixed MTRRs   : Enabled
524Variable MTRRs: Enabled
525
526Enabling cache
527Setting up local APIC...
528 apic_id: 0x02 done.
529siblings = 03, FMAP: area COREBOOT found @ 194000 (6733824 bytes)
530CBFS: Locating 'cpu_microcode_blob.bin'
531CBFS: 'cpu_microcode_blob.bin' not found.
532cpu_microcode_blob.bin not found. Skipping updates.
533CPU #2 initialized
534Initializing CPU #3
535Waiting for 1 CPUS to stop
536CPU: vendor AMD device 730f01
537CPU: family 16, model 30, stepping 01
538Model 16 Init.
539
540MTRR check
541Fixed MTRRs   : Enabled
542Variable MTRRs: Enabled
543
544Enabling cache
545Setting up local APIC...
546 apic_id: 0x03 done.
547siblings = 03, FMAP: area COREBOOT found @ 194000 (6733824 bytes)
548CBFS: Locating 'cpu_microcode_blob.bin'
549CBFS: 'cpu_microcode_blob.bin' not found.
550cpu_microcode_blob.bin not found. Skipping updates.
551CPU #3 initialized
552All AP CPUs stopped (1926 loops)
553CPU_CLUSTER: 0 init finished in 121 msecs
554PCI: 00:00.0 init
555PCI: 00:00.0 init finished in 0 msecs
556PCI: 00:02.0 init
557PCI: 00:02.0 init finished in 0 msecs
558PCI: 00:08.0 init
559PCI: 00:08.0 init finished in 0 msecs
560PCI: 00:10.0 init
561PCI: 00:10.0 init finished in 0 msecs
562PCI: 00:11.0 init
563PCI: 00:11.0 init finished in 0 msecs
564PCI: 00:13.0 init
565PCI: 00:13.0 init finished in 0 msecs
566PCI: 00:14.0 init
567IOAPIC: Initializing IOAPIC at 0xfec00000
568IOAPIC: Bootstrap Processor Local APIC = 0x00
569IOAPIC: ID = 0x04
570IOAPIC: 24 interrupts
571IOAPIC: Enabling interrupts on FSB
572PCI: 00:14.0 init finished in 7 msecs
573PCI: 00:14.3 init
574RTC Init
575PCI: 00:14.3 init finished in 0 msecs
576PCI: 00:14.7 init
577PCI: 00:14.7 init finished in 0 msecs
578PCI: 00:18.0 init
579PCI: 00:18.0 init finished in 0 msecs
580PCI: 00:18.1 init
581PCI: 00:18.1 init finished in 0 msecs
582PCI: 00:18.2 init
583PCI: 00:18.2 init finished in 0 msecs
584PCI: 00:18.3 init
585PCI: 00:18.3 init finished in 0 msecs
586PCI: 00:18.4 init
587PCI: 00:18.4 init finished in 0 msecs
588PCI: 00:18.5 init
589PCI: 00:18.5 init finished in 0 msecs
590PCI: 01:00.0 init
591PCI: 01:00.0 init finished in 0 msecs
592PCI: 02:00.0 init
593PCI: 02:00.0 init finished in 0 msecs
594PCI: 03:00.0 init
595PCI: 03:00.0 init finished in 0 msecs
596PCI: 04:00.0 init
597PCI: 04:00.0 init finished in 0 msecs
598PNP: 002e.2 init
599PNP: 002e.2 init finished in 0 msecs
600PNP: 002e.3 init
601PNP: 002e.3 init finished in 0 msecs
602PNP: 002e.108 init
603PNP: 002e.108 init finished in 0 msecs
604PNP: 002e.7 init
605PNP: 002e.7 init finished in 0 msecs
606PNP: 002e.107 init
607PNP: 002e.107 init finished in 0 msecs
608PNP: 002e.f init
609PNP: 002e.f init finished in 0 msecs
610PNP: 002e.14 init
611PNP: 002e.14 init finished in 0 msecs
612Devices initialized
613BS: BS_DEV_INIT run times (exec / console): 98 / 105 ms
614Finalize devices...
615PCI: 00:14.3 final
616Devices finalized
617BS: BS_POST_DEVICE run times (exec / console): 0 / 3 ms
618
619APIC 00: ** Enter AmdInitLate [00025000]
620AmdInitLate() returned AGESA_UNSUPPORTED
621
622EventLog:  EventClass = 2, EventInfo = 8040100.
623  Param1 = 1243000, Param2 = 0.
624  Param3 = 0, Param4 = 0.
625
626EventLog:  EventClass = 2, EventInfo = 8040100.
627  Param1 = 1244000, Param2 = 0.
628  Param3 = 0, Param4 = 0.
629
630EventLog:  EventClass = 2, EventInfo = 8040100.
631  Param1 = 1245000, Param2 = 0.
632  Param3 = 0, Param4 = 0.
633
634EventLog:  EventClass = 2, EventInfo = 8040100.
635  Param1 = 1246000, Param2 = 0.
636  Param3 = 0, Param4 = 0.
637
638EventLog:  EventClass = 2, EventInfo = 8040100.
639  Param1 = 1247000, Param2 = 0.
640  Param3 = 0, Param4 = 0.
641
642EventLog:  EventClass = 2, EventInfo = 8040100.
643  Param1 = 1248000, Param2 = 0.
644  Param3 = 0, Param4 = 0.
645
646EventLog:  EventClass = 2, EventInfo = 8040100.
647  Param1 = 1249000, Param2 = 0.
648  Param3 = 0, Param4 = 0.
649
650EventLog:  EventClass = 2, EventInfo = 8040100.
651  Param1 = 124a000, Param2 = 0.
652  Param3 = 0, Param4 = 0.
653
654EventLog:  EventClass = 2, EventInfo = 8040100.
655  Param1 = 124c000, Param2 = 0.
656  Param3 = 0, Param4 = 0.
657
658EventLog:  EventClass = 2, EventInfo = 8040100.
659  Param1 = 1180000, Param2 = 0.
660  Param3 = 0, Param4 = 0.
661
662EventLog:  EventClass = 2, EventInfo = 8040100.
663  Param1 = 1080000, Param2 = 0.
664  Param3 = 0, Param4 = 0.
665
666EventLog:  EventClass = 2, EventInfo = 8040100.
667  Param1 = 1040000, Param2 = 0.
668  Param3 = 0, Param4 = 0.
669
670EventLog:  EventClass = 2, EventInfo = 8040100.
671  Param1 = a008, Param2 = 0.
672  Param3 = 0, Param4 = 0.
673
674EventLog:  EventClass = 2, EventInfo = 8040100.
675  Param1 = a00f, Param2 = 0.
676  Param3 = 0, Param4 = 0.
677
678EventLog:  EventClass = 2, EventInfo = 8040100.
679  Param1 = a00e, Param2 = 0.
680  Param3 = 0, Param4 = 0.
681
682EventLog:  EventClass = 2, EventInfo = 8040100.
683  Param1 = a010, Param2 = 0.
684  Param3 = 0, Param4 = 0.
685APIC 00: Heap in SystemMem (4) at 0x10000014
686APIC 00: ** Exit  AmdInitLate [00025000]
687BS: BS_POST_DEVICE exit times (exec / console): 9 / 84 ms
688Writing IRQ routing tables to 0xf0000...write_pirq_routing_table done.
689Writing IRQ routing tables to 0xcfea7000...write_pirq_routing_table done.
690PIRQ table: 48 bytes.
691Wrote the mp table end at: 0x000f0410 - 0x000f060c
692Wrote the mp table end at: 0xcfea6010 - 0xcfea620c
693MP table: 524 bytes.
694FMAP: area COREBOOT found @ 194000 (6733824 bytes)
695CBFS: Locating 'fallback/dsdt.aml'
696CBFS: Found @ offset 28700 size 1af6
697FMAP: area COREBOOT found @ 194000 (6733824 bytes)
698tlcl_extend: response is 0
699TPM: Measured FMAP: COREBOOT CBFS: fallback/dsdt.aml into PCR 2
700FMAP: area COREBOOT found @ 194000 (6733824 bytes)
701CBFS: Locating 'fallback/slic'
702CBFS: 'fallback/slic' not found.
703ACPI: Writing ACPI tables at cfe82000.
704ACPI:    * FACS
705ACPI:    * DSDT
706ACPI:    * FADT
707pm_base: 0x0800
708ACPI: added table 1/32, length now 40
709ACPI:     * SSDT
710\_SB.PCI0.LIBR.TPM.TPM: LPC TPM PNP: 0c31.0
711ACPI: added table 2/32, length now 44
712ACPI:    * MCFG
713ACPI: added table 3/32, length now 48
714ACPI:    * TPM2
715TPM2 log created at 0xcfe72000
716ACPI: added table 4/32, length now 52
717ACPI:    * MADT
718ACPI: added table 5/32, length now 56
719current = cfe84180
720ACPI: added table 6/32, length now 60
721FMAP: area COREBOOT found @ 194000 (6733824 bytes)
722CBFS: Locating 'bootorder'
723CBFS: 'bootorder' not found.
724file [bootorder] not found in CBFS
725Missing bootorder data.
726Missing or invalid iommu knob, disable IOMMU.
727ACPI:   * IVRS at cfe84350
7280xcfe84350: 49 56 52 53 d0 00 00 00 01 c3 43 4f 52 45 76 34  IVRS......COREv4
7290xcfe84360: 43 4f 52 45 42 4f 4f 54 00 00 00 00 43 4f 52 45  COREBOOT....CORE
7300xcfe84370: 31 05 18 20 41 30 20 00 00 00 00 00 00 00 00 00  1.. A0 .........
7310xcfe84380: 10 fe 48 00 02 00 40 00 00 00 e0 f7 00 00 00 00  ..H...@.........
7320xcfe84390: 00 00 00 13 24 88 04 00 03 08 00 00 04 ff 00 00  ....$...........
7330xcfe843a0: 02 00 01 00 02 00 02 00 02 00 03 00 02 00 04 00  ................
7340xcfe843b0: 48 00 00 00 00 a0 00 02 48 00 00 d7 04 a0 00 01  H.......H.......
7350xcfe843c0: 48 00 00 00 05 01 00 01 11 3e 58 00 02 00 40 00  H........>X...@.
7360xcfe843d0: 00 00 e0 f7 00 00 00 00 00 00 00 13 00 80 04 00  ................
7370xcfe843e0: d2 0a 29 00 08 00 00 00 00 00 00 00 00 00 00 00  ..).............
7380xcfe843f0: 03 08 00 00 04 ff 00 00 02 00 01 00 02 00 02 00  ................
7390xcfe84400: 02 00 03 00 02 00 04 00 48 00 00 00 00 a0 00 02  ........H.......
7400xcfe84410: 48 00 00 d7 04 a0 00 01 48 00 00 00 05 01 00 01  H.......H.......
741ACPI: added table 7/32, length now 64
742ACPI:    * SRAT at cfe84420
743  AGESA SRAT table NULL. Skipping.
744ACPI:   * SLIT at cfe84420
745  AGESA SLIT table NULL. Skipping.
746ACPI:  * AGESA ALIB SSDT at cfe84420
747ACPI: added table 8/32, length now 68
748ACPI:    * SSDT at cfe88cd0
749ACPI: added table 9/32, length now 72
750ACPI:    * SSDT for PState at cfe89498
751ACPI:    * HPET
752ACPI: added table 10/32, length now 76
753ACPI: done.
754ACPI tables: 29920 bytes.
755smbios_write_tables: cfe71000
756Manufacturer: ef
757SF: Detected W25Q64_V with sector size 0x1000, total 0x800000
758Root Device (PC Engines apu2)
759SMBIOS tables: 547 bytes.
760Writing table forward entry at 0x00000500
761Wrote coreboot table at: 0x00000500, 0x10 bytes, checksum aff3
762Writing coreboot table at 0xcfea8000
763 0. 0000000000000000-0000000000000fff: CONFIGURATION TABLES
764 1. 0000000000001000-000000000009ffff: RAM
765 2. 00000000000c0000-00000000cfe70fff: RAM
766 3. 00000000cfe71000-00000000cfeb0fff: CONFIGURATION TABLES
767 4. 00000000cfeb1000-00000000cffa1fff: RAMSTAGE
768 5. 00000000cffa2000-00000000cfffffff: CONFIGURATION TABLES
769 6. 00000000f8000000-00000000fbffffff: RESERVED
770 7. 00000000fed40000-00000000fed44fff: RESERVED
771 8. 0000000100000000-000000012effffff: RAM
772FMAP: area COREBOOT found @ 194000 (6733824 bytes)
773Wrote coreboot table at: 0xcfea8000, 0x360 bytes, checksum e59a
774coreboot table: 888 bytes.
775IMD ROOT    0. 0xcffff000 0x00001000
776IMD SMALL   1. 0xcfffe000 0x00001000
777CONSOLE     2. 0xcffde000 0x00020000
778TIME STAMP  3. 0xcffdd000 0x00000910
779TCPA LOG    4. 0xcffdb000 0x000019cc
780VBOOT WORK  5. 0xcffc7000 0x00014000
781ROMSTG STCK 6. 0xcffaf000 0x00018000
782AFTER CAR   7. 0xcffa2000 0x0000d000
783RAMSTAGE    8. 0xcfeb0000 0x000f2000
784COREBOOT    9. 0xcfea8000 0x00008000
785IRQ TABLE  10. 0xcfea7000 0x00001000
786SMP TABLE  11. 0xcfea6000 0x00001000
787ACPI       12. 0xcfe82000 0x00024000
788TPM2 TCGLOG13. 0xcfe72000 0x00010000
789SMBIOS     14. 0xcfe71000 0x00000800
790IMD small region:
791  IMD ROOT    0. 0xcfffec00 0x00000400
792  FMAP        1. 0xcfffe9c0 0x00000230
793  ROMSTAGE    2. 0xcfffe9a0 0x00000004
794FMAP: area COREBOOT found @ 194000 (6733824 bytes)
795CBFS: Locating 'bootorder'
796CBFS: 'bootorder' not found.
797file [bootorder] not found in CBFS
798Missing bootorder data.
799Missing or invalid scon knob, enable console.
800BS: BS_WRITE_TABLES run times (exec / console): 4 / 216 ms
801FMAP: area COREBOOT found @ 194000 (6733824 bytes)
802CBFS: Locating 'fallback/payload'
803CBFS: Found @ offset 2a240 size 6ec90
804FMAP: area COREBOOT found @ 194000 (6733824 bytes)
805tlcl_extend: response is 0
806TPM: Measured FMAP: COREBOOT CBFS: fallback/payload into PCR 2
807Checking segment from ROM address 0xff9be278
808Checking segment from ROM address 0xff9be294
809Checking segment from ROM address 0xff9be2b0
810Loading segment from ROM address 0xff9be278
811  code (compression=1)
812  New segment dstaddr 0x00009000 memsize 0x1ba78 srcaddr 0xff9be2cc filesize 0x9a98
813Loading Segment: addr: 0x00009000 memsz: 0x000000000001ba78 filesz: 0x0000000000009a98
814using LZMA
815Clearing Segment: addr: 0x000000000001d057 memsz: 0x0000000000007a21
816Loading segment from ROM address 0xff9be294
817  code (compression=1)
818  New segment dstaddr 0x00100000 memsize 0x14088c srcaddr 0xff9c7d64 filesize 0x651a4
819Loading Segment: addr: 0x00100000 memsz: 0x000000000014088c filesz: 0x00000000000651a4
820using LZMA
821Loading segment from ROM address 0xff9be2b0
822  Entry Point 0x00009000
823BS: BS_PAYLOAD_LOAD run times (exec / console): 243 / 47 ms
824coreboot TCPA measurements:
825
826 PCR-2 2400b65e59a0e661ce997cc29b73189f174a0b09816323ee18a5779db95e4290 SHA256 [FMAP: COREBOOT CBFS: bootblock]
827 PCR-2 7f1e4ddfe08a140d3f976ba2f8d352dbb21492af6869227171607a09b8d19e5c SHA256 [FMAP: COREBOOT CBFS: fallback/romstage]
828 PCR-0 62571891215b4efc1ceab744ce59dd0b66ea6f73 SHA256 [VBOOT: boot mode]
829 PCR-1 45d09c9e1a576539a90797dd63e04b9b7a8dc0a624adf36e20145352aad19d78 SHA256 [VBOOT: GBB HWID]
830 PCR-2 ecb19b4c155bf2f64286d79451fc780f8749c40ca3ad558ab595f2712f85da68 SHA256 [FMAP: COREBOOT CBFS: fallback/postcar]
831 PCR-2 56c4097aa8e8d8581b90ae1e77f0415933d22604b28966554fc4ebd31f8758ff SHA256 [FMAP: COREBOOT CBFS: fallback/ramstage]
832 PCR-2 1f58561c980dd7c6d3c3cb6a845894cf674dc754b9215b54b85057b25ed3c1ea SHA256 [FMAP: COREBOOT CBFS: AGESA]
833 PCR-2 6c1d20616d91442b61de89de6bf81f0ee8e929919c9284061e00d004de893994 SHA256 [FMAP: COREBOOT CBFS: spd.bin]
834 PCR-3 279fbaf89d5fe618e8997ec8fa2be380edadb31b1f8a11e94240150447302f56 SHA256 [PSPDIR]
835 PCR-2 db0e5ecef198e81547d8c3551a3465f0813a673c13e34fd50cf38225316c13a7 SHA256 [FMAP: COREBOOT CBFS: fallback/dsdt.aml]
836 PCR-2 17058cba8fd0bed2405373bd2dca37a13d209654a582c8e04a9cc543fdaf6b87 SHA256 [FMAP: COREBOOT CBFS: fallback/payload]
837
838BS: BS_PAYLOAD_BOOT entry times (exec / console): 0 / 58 ms
839Jumping to boot code at 0x00009000(0xcfea8000)
840loader/i386/linux.c:214: prot_mode_mem = 0x100000, prot_mode_target = 100000,
841prot_size = f53000
842loader/i386/linux.c:872: bzImage, setup=0x3e00, size=0xf53000
843loader/i386/linux.c:1127: Initrd, addr=0x37f1f000, size=0xcf404
844grub_cmd_slaunch:122: check for manufacturer
845grub_cmd_slaunch:126: check for cpuid
846grub_cmd_slaunch:136: set slaunch
847grub_cmd_slaunch_module:156: check argc
848grub_cmd_slaunch_module:161: check relocator
849grub_cmd_slaunch_module:170: open file
850grub_cmd_slaunch_module:175: get size
851grub_cmd_slaunch_module:180: allocate memory
852grub_cmd_slaunch_module:192: addr: 0x1060000
853grub_cmd_slaunch_module:194: target: 0x1060000
854grub_cmd_slaunch_module:196: add module
855grub_cmd_slaunch_module:205: read file
856grub_cmd_slaunch_module:215: close file
857loader/i386/linux.c:540: real_size = 5000, mmap_size = 2000
858loader/i386/linux.c:390: addr = 10000, size = 80000, need_size = 5000
859loader/i386/linux.c:552: real_mode_target = 8b000, real_size = 5000,
860efi_mmap_size = 0
861loader/i386/linux.c:569: real_mode_mem = 0xcfb892c0
862loader/i386/linux.c:579: code32_start = 100000
863grub_slaunch_boot_skinit:41: real_mode_target: 0x8b000
864grub_slaunch_boot_skinit:42: prot_mode_target: 0x100000
865grub_slaunch_boot_skinit:43: params: 0xcfb892c0
866loader/i386/slaunch_skinit.c:52: Invoke SKINIT
867early console in extract_kernel
868input_data: 0x0000000001d762c8
869input_len: 0x00000000001b3e77
870output: 0x0000000001000000
871output_len: 0x0000000000f0a790
872kernel_total_size: 0x0000000000c16000
873trampoline_32bit: 0x000000000009d000
874
875Decompressing Linux... Parsing ELF... done.
876Booting the kernel.
877Linux version 5.1.0+ (coreboot@653ce3dd2a75) (gcc version 7.3.0 (Debian 7.3.0-25)) #1 SMP Mon Feb 24 09:36:11 UTC 2020
878Command line: BOOT_IMAGE=(cbfsdisk)/bzImage console=ttyS0,115200 earlyprintk=serial,ttyS0,115200
879x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers'
880x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'
881x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers'
882x86/fpu: xstate_offset[2]:  576, xstate_sizes[2]:  256
883x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'standard' format.
884BIOS-provided physical RAM map:
885BIOS-e820: [mem 0x0000000000000000-0x0000000000000fff] type 16
886BIOS-e820: [mem 0x0000000000001000-0x000000000009ffff] usable
887BIOS-e820: [mem 0x00000000000c0000-0x00000000000fffff] reserved
888BIOS-e820: [mem 0x0000000000100000-0x00000000cfe70fff] usable
889BIOS-e820: [mem 0x00000000cfe71000-0x00000000cfffffff] type 16
890BIOS-e820: [mem 0x00000000f8000000-0x00000000fbffffff] reserved
891BIOS-e820: [mem 0x00000000fed40000-0x00000000fed44fff] reserved
892BIOS-e820: [mem 0x0000000100000000-0x000000012effffff] usable
893printk: bootconsole [earlyser0] enabled
894NX (Execute Disable) protection: active
895tsc: Fast TSC calibration using PIT
896tsc: Detected 998.202 MHz processor
897e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
898e820: remove [mem 0x000a0000-0x000fffff] usable
899last_pfn = 0x12f000 max_arch_pfn = 0x400000000
900x86/PAT: Configuration [0-7]: WB  WT  UC- UC  WB  WT  UC- UC  
901last_pfn = 0xcfe71 max_arch_pfn = 0x400000000
902found SMP MP-table at [mem 0x000f0400-0x000f040f]
903Using GB pages for direct mapping
904BRK [0x01c00000, 0x01c00fff] PGTABLE
905BRK [0x01c01000, 0x01c01fff] PGTABLE
906BRK [0x01c02000, 0x01c02fff] PGTABLE
907BRK [0x01c03000, 0x01c03fff] PGTABLE
908RAMDISK: [mem 0x37e4f000-0x37f1efff]
909ACPI: Early table checksum verification disabled
910ACPI: RSDP 0x00000000000F0800 000024 (v02 COREv4)
911ACPI: XSDT 0x00000000CFE820E0 000074 (v01 COREv4 COREBOOT 00000000 CORE 20180531)
912ACPI: FACP 0x00000000CFE83D80 0000F4 (v04 COREv4 COREBOOT 00000000 CORE 20180531)
913ACPI: DSDT 0x00000000CFE82280 001AF6 (v02 COREv4 COREBOOT 00010001 INTL 20180531)
914ACPI: FACS 0x00000000CFE82240 000040
915ACPI: SSDT 0x00000000CFE83E80 0001E5 (v02 COREv4 COREBOOT 0000002A CORE 20180531)
916ACPI: MCFG 0x00000000CFE84070 00003C (v01 COREv4 COREBOOT 00000000 CORE 20180531)
917ACPI: TPM2 0x00000000CFE840B0 00004C (v04 COREv4 COREBOOT 00000000 CORE 20180531)
918ACPI: APIC 0x00000000CFE84100 00007E (v02 COREv4 COREBOOT 00000000 CORE 20180531)
919ACPI: HEST 0x00000000CFE84180 0001D0 (v01 COREv4 COREBOOT 00000000 CORE 20180531)
920ACPI: IVRS 0x00000000CFE84350 0000D0 (v01 COREv4 COREBOOT 00000000 CORE 20180531)
921ACPI: SSDT 0x00000000CFE84420 0048A6 (v02 AMD    AGESA    00000002 MSFT 04000000)
922ACPI: SSDT 0x00000000CFE88CD0 0007C8 (v01 AMD    AGESA    00000001 AMD  00000001)
923ACPI: HPET 0x00000000CFE894A0 000038 (v01 COREv4 COREBOOT 00000000 CORE 20180531)
924ACPI: Local APIC address 0xfee00000
925Zone ranges:
926  DMA32    [mem 0x0000000000001000-0x00000000ffffffff]
927  Normal   [mem 0x0000000100000000-0x000000012effffff]
928Movable zone start for each node
929Early memory node ranges
930  node   0: [mem 0x0000000000001000-0x000000000009ffff]
931  node   0: [mem 0x0000000000100000-0x00000000cfe70fff]
932  node   0: [mem 0x0000000100000000-0x000000012effffff]
933Zeroed struct page in unavailable ranges: 496 pages
934Initmem setup node 0 [mem 0x0000000000001000-0x000000012effffff]
935On node 0 totalpages: 1043984
936  DMA32 zone: 13305 pages used for memmap
937  DMA32 zone: 22 pages reserved
938  DMA32 zone: 851472 pages, LIFO batch:63
939  Normal zone: 3008 pages used for memmap
940  Normal zone: 192512 pages, LIFO batch:63
941ACPI: PM-Timer IO Port: 0x818
942ACPI: Local APIC address 0xfee00000
943ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1])
944IOAPIC[0]: apic_id 4, version 33, address 0xfec00000, GSI 0-23
945IOAPIC[1]: apic_id 5, version 33, address 0xfec20000, GSI 24-55
946ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
947ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
948ACPI: IRQ0 used by override.
949ACPI: IRQ9 used by override.
950Using ACPI (MADT) for SMP configuration information
951ACPI: HPET id: 0x10228201 base: 0xfed00000
952smpboot: Allowing 4 CPUs, 0 hotplug CPUs
953[mem 0xd0000000-0xf7ffffff] available for PCI devices
954clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns
955setup_percpu: NR_CPUS:64 nr_cpumask_bits:64 nr_cpu_ids:4 nr_node_ids:1
956percpu: Embedded 37 pages/cpu s122520 r0 d29032 u524288
957pcpu-alloc: s122520 r0 d29032 u524288 alloc=1*2097152
958pcpu-alloc: [0] 0 1 2 3 
959Built 1 zonelists, mobility grouping on.  Total pages: 1027649
960Kernel command line: console=ttyS0,115200 earlyprintk=serial,ttyS0,115200 BOOT_IMAGE=(cbfsdisk)/bzImage console=ttyS0,115200 earlyprintk=serial,ttyS0,115200
961Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
962Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
963Memory: 4024424K/4175936K available (6145K kernel code, 359K rwdata, 628K rodata, 688K init, 984K bss, 151512K reserved, 0K cma-reserved)
964rcu: Hierarchical RCU implementation.
965rcu: 	RCU restricting CPUs from NR_CPUS=64 to nr_cpu_ids=4.
966rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies.
967rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
968NR_IRQS: 4352, nr_irqs: 104, preallocated irqs: 16
969Console: colour dummy device 80x25
970printk: console [ttyS0] enabled
971printk: console [ttyS0] enabled
972printk: bootconsole [earlyser0] disabled
973printk: bootconsole [earlyser0] disabled
974ACPI: Core revision 20190215
975clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484873504 ns
976hpet clockevent registered
977APIC: Switch to symmetric I/O mode setup
978..TIMER: vector=0x30 apic1=0 pin1=2 apic2=0 pin2=0
979clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x1cc6e94a3ee, max_idle_ns: 881590612384 ns
980Calibrating delay loop (skipped), value calculated using timer frequency.. 1996.40 BogoMIPS (lpj=3992808)
981pid_max: default: 4096 minimum: 301
982Mount-cache hash table entries: 8192 (order: 4, 65536 bytes)
983Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes)
984*** VALIDATE proc ***
985*** VALIDATE cgroup1 ***
986*** VALIDATE cgroup2 ***
987Last level iTLB entries: 4KB 512, 2MB 8, 4MB 4
988Last level dTLB entries: 4KB 512, 2MB 256, 4MB 128, 1GB 0
989Spectre V2 : Spectre mitigation: kernel not compiled with retpoline; no mitigation available!
990Speculative Store Bypass: Mitigation: Speculative Store Bypass disabled via prctl
991Freeing SMP alternatives memory: 12K
992smpboot: CPU0: AMD GX-412TC SOC (family: 0x16, model: 0x30, stepping: 0x1)
993Performance Events: AMD PMU driver.
994... version:                0
995... bit width:              48
996... generic registers:      4
997... value mask:             0000ffffffffffff
998... max period:             00007fffffffffff
999... fixed-purpose events:   0
1000... event mask:             000000000000000f
1001rcu: Hierarchical SRCU implementation.
1002smp: Bringing up secondary CPUs ...
1003x86: Booting SMP configuration:
1004.... node  #0, CPUs:      #1 #2 #3
1005smp: Brought up 1 node, 4 CPUs
1006smpboot: Max logical packages: 1
1007smpboot: Total of 4 processors activated (7985.61 BogoMIPS)
1008devtmpfs: initialized
1009clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
1010futex hash table entries: 16 (order: -2, 1024 bytes)
1011cpuidle: using governor ladder
1012ACPI: bus type PCI registered
1013PCI: MMCONFIG for domain 0000 [bus 00-40] at [mem 0xf8000000-0xfc0fffff] (base 0xf8000000)
1014PCI: MMCONFIG at [mem 0xf8000000-0xfc0fffff] reserved in E820
1015PCI: MMCONFIG for 0000 [bus00-1f] at [mem 0xf8000000-0xf9ffffff] (base 0xf8000000) (size reduced!)
1016PCI: Using configuration type 1 for base access
1017ACPI: Added _OSI(Module Device)
1018ACPI: Added _OSI(Processor Device)
1019ACPI: Added _OSI(3.0 _SCP Extensions)
1020ACPI: Added _OSI(Processor Aggregator Device)
1021ACPI: Added _OSI(Linux-Dell-Video)
1022ACPI: Added _OSI(Linux-Lenovo-NV-HDMI-Audio)
1023ACPI: Added _OSI(Linux-HPI-Hybrid-Graphics)
1024ACPI: 4 ACPI AML tables successfully acquired and loaded
1025ACPI: Interpreter enabled
1026ACPI: (supports S0 S5)
1027ACPI: Using IOAPIC for interrupt routing
1028PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
1029ACPI: Enabled 7 GPEs in block 00 to 1F
1030ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
1031acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig Segments]
1032acpi PNP0A08:00: _OSC: not requesting OS control; OS requires [ExtendedConfig ASPM ClockPM MSI]
1033acpi PNP0A08:00: [Firmware Info]: MMCONFIG for domain 0000 [bus 00-1f] only partially covers this bridge
1034acpi PNP0A08:00: host bridge window expanded to [io  0x0000-0x0cf7 window]; [io  0x03b0-0x03df window] ignored
1035PCI host bridge to bus 0000:00
1036pci_bus 0000:00: root bus resource [io  0x0000-0x0cf7 window]
1037pci_bus 0000:00: root bus resource [io  0x0d00-0xffff window]
1038pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
1039pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000dffff]
1040pci_bus 0000:00: root bus resource [mem 0xd0000000-0xffffffff]
1041pci_bus 0000:00: root bus resource [bus 00-ff]
1042pci 0000:00:00.0: [1022:1566] type 00 class 0x060000
1043pci 0000:00:00.2: [1022:1567] type 00 class 0x080600
1044pci 0000:00:02.0: [1022:156b] type 00 class 0x060000
1045pci 0000:00:02.2: [1022:1439] type 01 class 0x060400
1046pci 0000:00:02.2: enabling Extended Tags
1047pci 0000:00:02.2: PME# supported from D0 D3hot D3cold
1048pci 0000:00:02.3: [1022:1439] type 01 class 0x060400
1049pci 0000:00:02.3: enabling Extended Tags
1050pci 0000:00:02.3: PME# supported from D0 D3hot D3cold
1051pci 0000:00:02.4: [1022:1439] type 01 class 0x060400
1052pci 0000:00:02.4: enabling Extended Tags
1053pci 0000:00:02.4: PME# supported from D0 D3hot D3cold
1054pci 0000:00:02.5: [1022:1439] type 01 class 0x060400
1055pci 0000:00:02.5: enabling Extended Tags
1056pci 0000:00:02.5: PME# supported from D0 D3hot D3cold
1057pci 0000:00:08.0: [1022:1537] type 00 class 0x108000
1058pci 0000:00:08.0: reg 0x10: [mem 0xf7e80000-0xf7e9ffff 64bit pref]
1059pci 0000:00:08.0: reg 0x18: [mem 0xf7c00000-0xf7cfffff]
1060pci 0000:00:08.0: reg 0x1c: [mem 0xf7ea4000-0xf7ea4fff]
1061pci 0000:00:08.0: reg 0x20: [mem 0xf7d00000-0xf7dfffff]
1062pci 0000:00:08.0: reg 0x24: [mem 0xf7ea0000-0xf7ea1fff]
1063pci 0000:00:10.0: [1022:7814] type 00 class 0x0c0330
1064pci 0000:00:10.0: reg 0x10: [mem 0xf7ea2000-0xf7ea3fff 64bit]
1065pci 0000:00:10.0: PME# supported from D0 D3hot D3cold
1066pci 0000:00:11.0: [1022:7800] type 00 class 0x010601
1067pci 0000:00:11.0: reg 0x10: [io  0x4010-0x4017]
1068pci 0000:00:11.0: reg 0x14: [io  0x4020-0x4023]
1069pci 0000:00:11.0: reg 0x18: [io  0x4018-0x401f]
1070pci 0000:00:11.0: reg 0x1c: [io  0x4024-0x4027]
1071pci 0000:00:11.0: reg 0x20: [io  0x4000-0x400f]
1072pci 0000:00:11.0: reg 0x24: [mem 0xf7ea5000-0xf7ea53ff]
1073pci 0000:00:11.0: PME# supported from D3hot
1074pci 0000:00:13.0: [1022:7808] type 00 class 0x0c0320
1075pci 0000:00:13.0: reg 0x10: [mem 0xf7ea6000-0xf7ea60ff]
1076pci 0000:00:13.0: supports D1 D2
1077pci 0000:00:13.0: PME# supported from D0 D1 D2 D3hot D3cold
1078pci 0000:00:14.0: [1022:780b] type 00 class 0x0c0500
1079pci 0000:00:14.3: [1022:780e] type 00 class 0x060100
1080pci 0000:00:14.7: [1022:7813] type 00 class 0x080501
1081pci 0000:00:14.7: reg 0x10: [mem 0xf7ea7000-0xf7ea70ff 64bit]
1082pci 0000:00:18.0: [1022:1580] type 00 class 0x060000
1083pci 0000:00:18.1: [1022:1581] type 00 class 0x060000
1084pci 0000:00:18.2: [1022:1582] type 00 class 0x060000
1085pci 0000:00:18.3: [1022:1583] type 00 class 0x060000
1086pci 0000:00:18.4: [1022:1584] type 00 class 0x060000
1087pci 0000:00:18.5: [1022:1585] type 00 class 0x060000
1088pci 0000:01:00.0: [8086:157b] type 00 class 0x020000
1089pci 0000:01:00.0: reg 0x10: [mem 0xf7900000-0xf791ffff]
1090pci 0000:01:00.0: reg 0x18: [io  0x1000-0x101f]
1091pci 0000:01:00.0: reg 0x1c: [mem 0xf7920000-0xf7923fff]
1092pci 0000:01:00.0: PME# supported from D0 D3hot D3cold
1093pci 0000:00:02.2: PCI bridge to [bus 01]
1094pci 0000:00:02.2:   bridge window [io  0x1000-0x1fff]
1095pci 0000:00:02.2:   bridge window [mem 0xf7900000-0xf79fffff]
1096pci 0000:02:00.0: [8086:157b] type 00 class 0x020000
1097pci 0000:02:00.0: reg 0x10: [mem 0xf7a00000-0xf7a1ffff]
1098pci 0000:02:00.0: reg 0x18: [io  0x2000-0x201f]
1099pci 0000:02:00.0: reg 0x1c: [mem 0xf7a20000-0xf7a23fff]
1100pci 0000:02:00.0: PME# supported from D0 D3hot D3cold
1101pci 0000:00:02.3: PCI bridge to [bus 02]
1102pci 0000:00:02.3:   bridge window [io  0x2000-0x2fff]
1103pci 0000:00:02.3:   bridge window [mem 0xf7a00000-0xf7afffff]
1104pci 0000:03:00.0: [8086:157b] type 00 class 0x020000
1105pci 0000:03:00.0: reg 0x10: [mem 0xf7b00000-0xf7b1ffff]
1106pci 0000:03:00.0: reg 0x18: [io  0x3000-0x301f]
1107pci 0000:03:00.0: reg 0x1c: [mem 0xf7b20000-0xf7b23fff]
1108pci 0000:03:00.0: PME# supported from D0 D3hot D3cold
1109pci 0000:00:02.4: PCI bridge to [bus 03]
1110pci 0000:00:02.4:   bridge window [io  0x3000-0x3fff]
1111pci 0000:00:02.4:   bridge window [mem 0xf7b00000-0xf7bfffff]
1112pci 0000:04:00.0: [168c:003c] type 00 class 0x028000
1113pci 0000:04:00.0: reg 0x10: [mem 0xf7600000-0xf77fffff 64bit]
1114pci 0000:04:00.0: reg 0x30: [mem 0xf7800000-0xf780ffff pref]
1115pci 0000:04:00.0: supports D1 D2
1116pci 0000:00:02.5: PCI bridge to [bus 04]
1117pci 0000:00:02.5:   bridge window [mem 0xf7600000-0xf78fffff]
1118pci_bus 0000:00: on NUMA node 0
1119ACPI: PCI Interrupt Link [INTA] (IRQs *3 4 5 7 10 11 12 15)
1120ACPI: PCI Interrupt Link [INTB] (IRQs *3 4 5 7 10 11 12 15)
1121ACPI: PCI Interrupt Link [INTC] (IRQs 3 4 *5 7 10 11 12 15)
1122ACPI: PCI Interrupt Link [INTD] (IRQs 3 4 5 *7 10 11 12 15)
1123ACPI: PCI Interrupt Link [INTE] (IRQs 3 4 5 7 10 *11 12 15)
1124ACPI: PCI Interrupt Link [INTF] (IRQs 9) *10
1125ACPI: PCI Interrupt Link [INTG] (IRQs 3 4 5 7 10 11 12 15) *0
1126ACPI: PCI Interrupt Link [INTH] (IRQs 3 4 5 7 10 11 12 15) *0
1127vgaarb: loaded
1128SCSI subsystem initialized
1129libata version 3.00 loaded.
1130ACPI: bus type USB registered
1131usbcore: registered new interface driver usbfs
1132usbcore: registered new interface driver hub
1133usbcore: registered new device driver usb
1134PCI: Using ACPI for IRQ routing
1135PCI: pci_cache_line_size set to 64 bytes
1136e820: reserve RAM buffer [mem 0xcfe71000-0xcfffffff]
1137e820: reserve RAM buffer [mem 0x12f000000-0x12fffffff]
1138clocksource: Switched to clocksource tsc-early
1139ACPI: Failed to create genetlink family for ACPI event
1140pnp: PnP ACPI init
1141system 00:00: [mem 0xfec10002-0xfec11001] has been reserved
1142system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
1143pnp 00:01: Plug and Play ACPI device, IDs PNP0b00 (active)
1144pnp 00:02: Plug and Play ACPI device, IDs PNP0501 (active)
1145pnp 00:03: Plug and Play ACPI device, IDs PNP0501 (active)
1146pnp 00:04: Plug and Play ACPI device, IDs PNP0c31 (active)
1147pnp: PnP ACPI: found 5 devices
1148clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
1149pci 0000:00:02.2: PCI bridge to [bus 01]
1150pci 0000:00:02.2:   bridge window [io  0x1000-0x1fff]
1151pci 0000:00:02.2:   bridge window [mem 0xf7900000-0xf79fffff]
1152pci 0000:00:02.3: PCI bridge to [bus 02]
1153pci 0000:00:02.3:   bridge window [io  0x2000-0x2fff]
1154pci 0000:00:02.3:   bridge window [mem 0xf7a00000-0xf7afffff]
1155pci 0000:00:02.4: PCI bridge to [bus 03]
1156pci 0000:00:02.4:   bridge window [io  0x3000-0x3fff]
1157pci 0000:00:02.4:   bridge window [mem 0xf7b00000-0xf7bfffff]
1158pci 0000:00:02.5: PCI bridge to [bus 04]
1159pci 0000:00:02.5:   bridge window [mem 0xf7600000-0xf78fffff]
1160pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7 window]
1161pci_bus 0000:00: resource 5 [io  0x0d00-0xffff window]
1162pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
1163pci_bus 0000:00: resource 7 [mem 0x000c0000-0x000dffff]
1164pci_bus 0000:00: resource 8 [mem 0xd0000000-0xffffffff]
1165pci_bus 0000:01: resource 0 [io  0x1000-0x1fff]
1166pci_bus 0000:01: resource 1 [mem 0xf7900000-0xf79fffff]
1167pci_bus 0000:02: resource 0 [io  0x2000-0x2fff]
1168pci_bus 0000:02: resource 1 [mem 0xf7a00000-0xf7afffff]
1169pci_bus 0000:03: resource 0 [io  0x3000-0x3fff]
1170pci_bus 0000:03: resource 1 [mem 0xf7b00000-0xf7bfffff]
1171pci_bus 0000:04: resource 1 [mem 0xf7600000-0xf78fffff]
1172pci 0000:00:13.0: PME# does not work under D3, disabling it
1173PCI: CLS 64 bytes, default 64
1174Unpacking initramfs...
1175Freeing initrd memory: 832K
1176PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
1177software IO TLB: mapped [mem 0xcbe71000-0xcfe71000] (64MB)
1178amd_uncore: AMD NB counters detected
1179amd_uncore: AMD LLC counters detected
1180LVT offset 0 assigned for vector 0x400
1181perf: AMD IBS detected (0x000000ff)
1182workingset: timestamp_bits=46 max_order=20 bucket_order=0
1183Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
1184io scheduler mq-deadline registered
1185io scheduler kyber registered
1186io scheduler bfq registered
1187input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
1188ACPI: Power Button [PWRB]
1189input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
1190ACPI: Power Button [PWRF]
1191Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
119200:02: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
119300:03: ttyS1 at I/O 0x2f8 (irq = 3, base_baud = 115200) is a 16550A
1194tpm_tis 00:04: 2.0 TPM (device-id 0x1A, rev-id 16)
1195loop: module loaded
1196ahci 0000:00:11.0: version 3.0
1197ahci 0000:00:11.0: AHCI 0001.0300 32 slots 2 ports 6 Gbps 0x3 impl SATA mode
1198ahci 0000:00:11.0: flags: 64bit ncq sntf ilck pm led clo pmp fbs pio slum part 
1199scsi host0: ahci
1200scsi host1: ahci
1201ata1: SATA max UDMA/133 abar m1024@0xf7ea5000 port 0xf7ea5100 irq 19
1202ata2: SATA max UDMA/133 abar m1024@0xf7ea5000 port 0xf7ea5180 irq 19
1203ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
1204ehci-pci: EHCI PCI platform driver
1205ehci-pci 0000:00:13.0: EHCI Host Controller
1206ehci-pci 0000:00:13.0: new USB bus registered, assigned bus number 1
1207ehci-pci 0000:00:13.0: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
1208ehci-pci 0000:00:13.0: debug port 2
1209ehci-pci 0000:00:13.0: irq 18, io mem 0xf7ea6000
1210ehci-pci 0000:00:13.0: USB 2.0 started, EHCI 1.00
1211usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.01
1212usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
1213usb usb1: Product: EHCI Host Controller
1214usb usb1: Manufacturer: Linux 5.1.0+ ehci_hcd
1215usb usb1: SerialNumber: 0000:00:13.0
1216hub 1-0:1.0: USB hub found
1217hub 1-0:1.0: 2 ports detected
1218ehci-platform: EHCI generic platform driver
1219xhci_hcd 0000:00:10.0: xHCI Host Controller
1220xhci_hcd 0000:00:10.0: new USB bus registered, assigned bus number 2
1221ata2: SATA link down (SStatus 0 SControl 300)
1222ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
1223ata1.00: native sectors (28867584) is smaller than sectors (29832192)
1224ata1.00: ATA-9: SanDisk SSD i110 16GB, i21J719, max UDMA/133
1225ata1.00: 29832192 sectors, multi 1: LBA48 NCQ (depth 32)
1226ata1.00: configured for UDMA/133
1227scsi 0:0:0:0: Direct-Access     ATA      SanDisk SSD i110 719  PQ: 0 ANSI: 5
1228sd 0:0:0:0: [sda] 29832192 512-byte logical blocks: (15.3 GB/14.2 GiB)
1229sd 0:0:0:0: [sda] Write Protect is off
1230sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
1231sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
1232 sda: sda1 sda2
1233sd 0:0:0:0: [sda] Attached SCSI disk
1234xhci_hcd 0000:00:10.0: hcc params 0x014040c3 hci version 0x100 quirks 0x0000000000000410
1235usb usb2: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.01
1236usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
1237usb usb2: Product: xHCI Host Controller
1238usb usb2: Manufacturer: Linux 5.1.0+ xhci-hcd
1239usb usb2: SerialNumber: 0000:00:10.0
1240hub 2-0:1.0: USB hub found
1241hub 2-0:1.0: 2 ports detected
1242xhci_hcd 0000:00:10.0: xHCI Host Controller
1243xhci_hcd 0000:00:10.0: new USB bus registered, assigned bus number 3
1244xhci_hcd 0000:00:10.0: Host supports USB 3.0  SuperSpeed
1245usb usb3: We don't know the algorithms for LPM for this host, disabling LPM.
1246tsc: Refined TSC clocksource calibration: 998.127 MHz
1247usb usb3: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.01
1248clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x1cc65b93289, max_idle_ns: 881590487074 ns
1249usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
1250usb usb3: Product: xHCI Host Controller
1251usb usb3: Manufacturer: Linux 5.1.0+ xhci-hcd
1252usb usb3: SerialNumber: 0000:00:10.0
1253clocksource: Switched to clocksource tsc
1254hub 3-0:1.0: USB hub found
1255hub 3-0:1.0: 2 ports detected
1256i8042: PNP: No PS/2 controller found.
1257i8042: Probing ports directly.
1258usb 1-1: new high-speed USB device number 2 using ehci-pci
1259usb 2-1: new high-speed USB device number 2 using xhci_hcd
1260usb 1-1: New USB device found, idVendor=0438, idProduct=7900, bcdDevice= 0.18
1261usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
1262hub 1-1:1.0: USB hub found
1263hub 1-1:1.0: 4 ports detected
1264usb 2-1: New USB device found, idVendor=0781, idProduct=5591, bcdDevice= 1.00
1265usb 2-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
1266usb 2-1: Product: Ultra USB 3.0
1267usb 2-1: Manufacturer: SanDisk
1268usb 2-1: SerialNumber: 4C530001250912120520
1269usb 2-2: new high-speed USB device number 3 using xhci_hcd
1270usb 2-2: New USB device found, idVendor=0781, idProduct=5591, bcdDevice= 1.00
1271usb 2-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
1272usb 2-2: Product: Ultra USB 3.0
1273usb 2-2: Manufacturer: SanDisk
1274usb 2-2: SerialNumber: 4C530001010308112213
1275i8042: No controller found
1276sdhci: Secure Digital Host Controller Interface driver
1277sdhci: Copyright(c) Pierre Ossman
1278usbcore: registered new interface driver usbhid
1279usbhid: USB HID core driver
1280random: get_random_bytes called from 0xffffffff810341f2 with crng_init=0
1281sched_clock: Marking stable (4531741217, 36863018)->(4807026611, -238422376)
1282Freeing unused kernel image memory: 688K
1283Write protecting the kernel read-only data: 10240k
1284Freeing unused kernel image memory: 2036K
1285Freeing unused kernel image memory: 1420K
1286Run /init as init process
12872020/02/24 01:00:08 Welcome to u-root!
1288                              _
1289   _   e cgroup1: Unknown subsys name 'net_cls'
1290_      _ __ ___ e cgroup1: Unknown subsys name 'hugetlb'
1291  ___ | |_
1292  | | | |____| '__/ _ \ / _ \| __|
1293  | |_| |____| | | (_) | (_) | |_
1294   \__,_|    |_|  \___/ \___/ \__|
1295
12962020/02/24 01:00:08 u-root init: error creating mount -t "cgroup" -o net_cls,net_prio "cgroup" "/sys/fs/cgroup/net_cls,net_prio" flags 0x0: invalid argument
12972020/02/24 01:00:08 u-root init: error creating mount -t "cgroup" -o hugetlb "cgroup" "/sys/fs/cgroup/hugetlb" flags 0x0: invalid argument
12982020/02/24 01:00:08 Failed to initialize loopback: function not implemented
12992020/02/24 01:00:08 Executing Command: [/bbin/mount -t ext4 /dev/sda1 /var]
13002020/02/24 01:00:08 Executing Command: [/bbin/kexec -c loglvl=all guest_loglvl=all dom0_mem=512M console=com1 no-real-mode --module /var/bzImage console=hvc0 earlyprintk=xen nomodeset root=/dev/sda2 /var/xen.gz]
13012020/02/24 01:00:09 Parsing multiboot header
13022020/02/24 01:00:09 Getting kernel entry point
13032020/02/24 01:00:09 Kernel entry point at 0x200000
13042020/02/24 01:00:09 Parsing ELF segments
13052020/02/24 01:00:09 Parsing memory map
13062020/02/24 01:00:09 Sysfs file "/sys/firmware/memmap/0/type" contains unrecognized memory map type "Unknown E820 type", defaulting to Reserved
13072020/02/24 01:00:09 Sysfs file "/sys/firmware/memmap/4/type" contains unrecognized memory map type "Unknown E820 type", defaulting to Reserved
13082020/02/24 01:00:09 Preparing multiboot info
13092020/02/24 01:00:09 Memory map:
1310[0x0, 0x1000) (len: 0x1000, size: 0x14, type: 2)
1311[0x1000, 0xa0000) (len: 0x9f000, size: 0x14, type: 1)
1312[0xc0000, 0x100000) (len: 0x40000, size: 0x14, type: 2)
1313[0x100000, 0xcfe71000) (len: 0xcfd71000, size: 0x14, type: 1)
1314[0xcfe71000, 0xd0000000) (len: 0x18f000, size: 0x14, type: 2)
1315[0xf8000000, 0xfc000000) (len: 0x4000000, size: 0x14, type: 2)
1316[0xfed40000, 0xfed45000) (len: 0x5000, size: 0x14, type: 2)
1317[0x100000000, 0x12f000000) (len: 0x2f000000, size: 0x14, type: 1)
13182020/02/24 01:00:09 Adding module /var/bzImage
13192020/02/24 01:00:09 Adding trampoline
13202020/02/24 01:00:09 Trampoline entry point at 0x103000
1321kexec_core: Starting new kernel
1322 Xen 4.13-unstable
1323(XEN) Xen version 4.13-unstable (@) (x86_64-pce-linux-gcc (GCC) 9.2.0) debug=y  Wed Feb 19 22:28:20 UTC 2020
1324(XEN) Latest ChangeSet: Fri Aug 30 20:35:13 2019 +0100 git:1014f47c7a-dirty
1325(XEN) build-id: 0df461964a16d720399385a64e1efb0f152c0ec2
1326(XEN) Bootloader: u-root kexec
1327(XEN) Command line: guest_loglvl=all dom0_mem=512M console=com1 no-real-mode
1328(XEN) Xen image load base address: 0
1329(XEN) Video information:
1330(XEN)  VGA is text mode 80x25, font 8x16
1331(XEN) Disc information:
1332(XEN)  Found 0 MBR signatures
1333(XEN)  Found 0 EDD information structures
1334(XEN) Multiboot-e820 RAM map:
1335(XEN)  0000000000000000 - 0000000000001000 (reserved)
1336(XEN)  0000000000001000 - 00000000000a0000 (usable)
1337(XEN)  00000000000c0000 - 0000000000100000 (reserved)
1338(XEN)  0000000000100000 - 00000000cfe71000 (usable)
1339(XEN)  00000000cfe71000 - 00000000d0000000 (reserved)
1340(XEN)  00000000f8000000 - 00000000fc000000 (reserved)
1341(XEN)  00000000fed40000 - 00000000fed45000 (reserved)
1342(XEN)  0000000100000000 - 000000012f000000 (usable)
1343(XEN) New Xen image base address: 0xcf800000
1344(XEN) ACPI: RSDP 000F0800, 0024 (r2 COREv4)
1345(XEN) ACPI: XSDT CFE820E0, 0074 (r1 COREv4 COREBOOT        0 CORE 20180531)
1346(XEN) ACPI: FACP CFE83D80, 00F4 (r4 COREv4 COREBOOT        0 CORE 20180531)
1347(XEN) ACPI: DSDT CFE82280, 1AF6 (r2 COREv4 COREBOOT    10001 INTL 20180531)
1348(XEN) ACPI: FACS CFE82240, 0040
1349(XEN) ACPI: SSDT CFE83E80, 01E5 (r2 COREv4 COREBOOT       2A CORE 20180531)
1350(XEN) ACPI: MCFG CFE84070, 003C (r1 COREv4 COREBOOT        0 CORE 20180531)
1351(XEN) ACPI: TPM2 CFE840B0, 004C (r4 COREv4 COREBOOT        0 CORE 20180531)
1352(XEN) ACPI: APIC CFE84100, 007E (r2 COREv4 COREBOOT        0 CORE 20180531)
1353(XEN) ACPI: HEST CFE84180, 01D0 (r1 COREv4 COREBOOT        0 CORE 20180531)
1354(XEN) ACPI: IVRS CFE84350, 00D0 (r1 COREv4 COREBOOT        0 CORE 20180531)
1355(XEN) ACPI: SSDT CFE84420, 48A6 (r2 AMD    AGESA           2 MSFT  4000000)
1356(XEN) ACPI: SSDT CFE88CD0, 07C8 (r1 AMD    AGESA           1 AMD         1)
1357(XEN) ACPI: HPET CFE894A0, 0038 (r1 COREv4 COREBOOT        0 CORE 20180531)
1358(XEN) System RAM: 4078MB (4175936kB)
1359(XEN) No NUMA configuration found
1360(XEN) Faking a node at 0000000000000000-000000012f000000
1361(XEN) Domain heap initialised
1362(XEN) CPU Vendor: AMD, Family 22 (0x16), Model 48 (0x30), Stepping 1 (raw 00730f01)
1363(XEN) found SMP MP-table at 000f0400
1364(XEN) DMI present.
1365(XEN) Using APIC driver default
1366(XEN) ACPI: PM-Timer IO Port: 0x818 (32 bits)
1367(XEN) ACPI: SLEEP INFO: pm1x_cnt[1:804,1:0], pm1x_evt[1:800,1:0]
1368(XEN) ACPI: 32/64X FACS address mismatch in FADT - cfe82240/0000000000000000, using 32
1369(XEN) ACPI:             wakeup_vec[cfe8224c], vec_size[20]
1370(XEN) ACPI: Local APIC address 0xfee00000
1371(XEN) ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
1372(XEN) ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
1373(XEN) ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled)
1374(XEN) ACPI: LAPIC (acpi_id[0x03] lapic_id[0x03] enabled)
1375(XEN) ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1])
1376(XEN) ACPI: IOAPIC (id[0x04] address[0xfec00000] gsi_base[0])
1377(XEN) IOAPIC[0]: apic_id 4, version 33, address 0xfec00000, GSI 0-23
1378(XEN) ACPI: IOAPIC (id[0x05] address[0xfec20000] gsi_base[24])
1379(XEN) IOAPIC[1]: apic_id 5, version 33, address 0xfec20000, GSI 24-55
1380(XEN) ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
1381(XEN) ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
1382(XEN) ACPI: IRQ0 used by override.
1383(XEN) ACPI: IRQ2 used by override.
1384(XEN) ACPI: IRQ9 used by override.
1385(XEN) Enabling APIC mode:  Flat.  Using 2 I/O APICs
1386(XEN) ACPI: HPET id: 0x10228201 base: 0xfed00000
1387(XEN) PCI: MCFG configuration 0: base f8000000 segment 0000 buses 00 - 40
1388(XEN) PCI: MCFG area at f8000000 reserved in E820
1389(XEN) PCI: updated MCFG configuration 0: base f8000000 segment 0 buses 0 - 31
1390(XEN) PCI: Using MCFG for segment 0000 bus 00-1f
1391(XEN) ERST table was not found
1392(XEN) HEST: Table parsing has been initialized
1393(XEN) Using ACPI (MADT) for SMP configuration information
1394(XEN) SMP: Allowing 4 CPUs (0 hotplug CPUs)
1395(XEN) IRQ limits: 56 GSI, 728 MSI/MSI-X
1396(XEN) xstate: size: 0x340 and states: 0x7
1397(XEN) CPU0: AMD Fam16h machine check reporting enabled
1398(XEN) Speculative mitigation facilities:
1399(XEN)   Hardware features:
1400(XEN)   Compiled-in support: INDIRECT_THUNK SHADOW_PAGING
1401(XEN)   Xen settings: BTI-Thunk LFENCE, SPEC_CTRL: No, Other:
1402(XEN)   Support for HVM VMs: RSB
1403(XEN)   Support for PV VMs: RSB
1404(XEN)   XPTI (64-bit PV only): Dom0 disabled, DomU disabled (without PCID)
1405(XEN)   PV L1TF shadowing: Dom0 disabled, DomU disabled
1406(XEN) Using scheduler: SMP Credit Scheduler rev2 (credit2)
1407(XEN) Initializing Credit2 scheduler
1408(XEN)  load_precision_shift: 18
1409(XEN)  load_window_shift: 30
1410(XEN)  underload_balance_tolerance: 0
1411(XEN)  overload_balance_tolerance: -3
1412(XEN)  runqueues arrangement: socket
1413(XEN)  cap enforcement granularity: 10ms
1414(XEN) load tracking window length 1073741824 ns
1415(XEN) Adding cpu 0 to runqueue 0
1416(XEN)  First cpu on runqueue, activating
1417(XEN) Platform timer is 14.318MHz HPET
1418(XEN) Detected 998.153 MHz processor.
1419(XEN) alt table ffff82d0804741b0 -> ffff82d0804810e6
1420(XEN) AMD-Vi: IOMMU Extended Features:
1421(XEN) - Peripheral Page Service Request
1422(XEN) - Invalidate All Command
1423(XEN) - Guest APIC
1424(XEN) - Performance Counters
1425(XEN) - Host Address Translation Size: 0x2
1426(XEN) - Guest Address Translation Size: 0
1427(XEN) - Guest CR3 Root Table Level: 0
1428(XEN) - Maximum PASID: 0x8
1429(XEN) - SMI Filter Register: 0x1
1430(XEN) - SMI Filter Register Count: 0x2
1431(XEN) - Guest Virtual APIC Modes: 0x1
1432(XEN) - Dual PPR Log: 0
1433(XEN) - Dual Event Log: 0
1434(XEN) - Device Table Segmentation: 0
1435(XEN) - Memory Access Routing and Control: 0
1436(XEN) - VM Table Size: 0
1437(XEN) AMD-Vi: Disabled HAP memory map sharing with IOMMU
1438(XEN) AMD-Vi: IOMMU 0 Enabled.
1439(XEN) I/O virtualisation enabled
1440(XEN)  - Dom0 mode: Relaxed
1441(XEN) Interrupt remapping enabled
1442(XEN) nr_sockets: 1
1443(XEN) ENABLING IO-APIC IRQs
1444(XEN)  -> Using new ACK method
1445(XEN) ..TIMER: vector=0xF0 apic1=0 pin1=2 apic2=0 pin2=0
1446(XEN) Allocated console ring of 32 KiB.
1447(XEN) mwait-idle: does not run on family 22 model 48
1448(XEN) HVM: ASIDs enabled.
1449(XEN) SVM: Supported advanced features:
1450(XEN)  - Nested Page Tables (NPT)
1451(XEN)  - Last Branch Record (LBR) Virtualisation
1452(XEN)  - Next-RIP Saved on #VMEXIT
1453(XEN)  - DecodeAssists
1454(XEN)  - Pause-Intercept Filter
1455(XEN)  - Pause-Intercept Filter Threshold
1456(XEN)  - TSC Rate MSR
1457(XEN) HVM: SVM enabled
1458(XEN) HVM: Hardware Assisted Paging (HAP) detected
1459(XEN) HVM: HAP page sizes: 4kB, 2MB, 1GB
1460(XEN) alt table ffff82d0804741b0 -> ffff82d0804810e6
1461(XEN) Adding cpu 1 to runqueue 0
1462(XEN) AMD-Vi: IO_PAGE_FAULT: domain = 0, device id = 0xa0, fault address = 0xfdf8000000, flags = 0x18
1463(XEN) AMD-Vi: IO_PAGE_FAULT: domain = 0, device id = 0xa0, fault address = 0xfdf8000000, flags = 0x18
1464(XEN) Adding cpu 2 to runqueue 0
1465(XEN) Adding cpu 3 to runqueue 0
1466(XEN) Brought up 4 CPUs
1467(XEN) Running stub recovery selftests...
1468(XEN) traps.c:1567: GPF (0000): ffff82d0bffff041 [ffff82d0bffff041] -> ffff82d0803873ff
1469(XEN) traps.c:762: Trap 12: ffff82d0bffff040 [ffff82d0bffff040] -> ffff82d0803873ff
1470(XEN) traps.c:1101: Trap 3: ffff82d0bffff041 [ffff82d0bffff041] -> ffff82d0803873ff
1471(XEN) VPMU: disabled
1472(XEN) MCA: Use hw thresholding to adjust polling frequency
1473(XEN) mcheck_poll: Machine check polling timer started.
1474(XEN) mtrr: your CPUs had inconsistent variable MTRR settings
1475(XEN) mtrr: probably your BIOS does not setup all CPUs.
1476(XEN) mtrr: corrected configuration.
1477(XEN) MTRR default type: uncachable
1478(XEN) MTRR fixed ranges enabled:
1479(XEN)   00000-9ffff write-back
1480(XEN)   a0000-bffff uncachable
1481(XEN)   c0000-fffff write-back
1482(XEN) MTRR variable ranges enabled:
1483(XEN)   0 base 00ff800000 mask ffff800000 write-protect
1484(XEN)   1 base 00c0000000 mask fff0000000 write-back
1485(XEN)   2 base 0080000000 mask ffc0000000 write-back
1486(XEN)   3 base 0000000000 mask ff80000000 write-back
1487(XEN)   4 disabled
1488(XEN)   5 disabled
1489(XEN)   6 disabled
1490(XEN)   7 disabled
1491(XEN) TOM2: 00012f000000 (WB)
1492(XEN) Dom0 has maximum 632 PIRQs
1493(XEN) NX (Execute Disable) protection active
1494(XEN) *** Building a PV Dom0 ***
1495(XEN) ELF: phdr: paddr=0x1000000 memsz=0x12aa000
1496(XEN) ELF: phdr: paddr=0x2400000 memsz=0x15b000
1497(XEN) ELF: phdr: paddr=0x255b000 memsz=0x22858
1498(XEN) ELF: phdr: paddr=0x257e000 memsz=0x2ae000
1499(XEN) ELF: memory: 0x1000000 -> 0x282c000
1500(XEN) ELF: note: GUEST_OS = "linux"
1501(XEN) ELF: note: GUEST_VERSION = "2.6"
1502(XEN) ELF: note: XEN_VERSION = "xen-3.0"
1503(XEN) ELF: note: VIRT_BASE = 0xffffffff80000000
1504(XEN) ELF: note: INIT_P2M = 0x8000000000
1505(XEN) ELF: note: ENTRY = 0xffffffff8257e180
1506(XEN) ELF: note: HYPERCALL_PAGE = 0xffffffff81001000
1507(XEN) ELF: note: FEATURES = "!writable_page_tables|pae_pgdir_above_4gb"
1508(XEN) ELF: note: SUPPORTED_FEATURES = 0x8801
1509(XEN) ELF: note: PAE_MODE = "yes"
1510(XEN) ELF: note: LOADER = "generic"
1511(XEN) ELF: note: unknown (0xd)
1512(XEN) ELF: note: SUSPEND_CANCEL = 0x1
1513(XEN) ELF: note: MOD_START_PFN = 0x1
1514(XEN) ELF: note: HV_START_LOW = 0xffff800000000000
1515(XEN) ELF: note: PADDR_OFFSET = 0
1516(XEN) ELF: note: PHYS32_ENTRY = 0x10003c0
1517(XEN) ELF: Found PVH image
1518(XEN) ELF: addresses:
1519(XEN)     virt_base        = 0xffffffff80000000
1520(XEN)     elf_paddr_offset = 0x0
1521(XEN)     virt_offset      = 0xffffffff80000000
1522(XEN)     virt_kstart      = 0xffffffff81000000
1523(XEN)     virt_kend        = 0xffffffff8282c000
1524(XEN)     virt_entry       = 0xffffffff8257e180
1525(XEN)     p2m_base         = 0x8000000000
1526(XEN)  Xen  kernel: 64-bit, lsb, compat32
1527(XEN)  Dom0 kernel: 64-bit, PAE, lsb, paddr 0x1000000 -> 0x282c000
1528(XEN) PHYSICAL MEMORY ARRANGEMENT:
1529(XEN)  Dom0 alloc.:   0000000124000000->0000000128000000 (114688 pages to be allocated)
1530(XEN) VIRTUAL MEMORY ARRANGEMENT:
1531(XEN)  Loaded kernel: ffffffff81000000->ffffffff8282c000
1532(XEN)  Init. ramdisk: 0000000000000000->0000000000000000
1533(XEN)  Phys-Mach map: 0000008000000000->0000008000100000
1534(XEN)  Start info:    ffffffff8282c000->ffffffff8282c4b8
1535(XEN)  Xenstore ring: 0000000000000000->0000000000000000
1536(XEN)  Console ring:  0000000000000000->0000000000000000
1537(XEN)  Page tables:   ffffffff8282d000->ffffffff82846000
1538(XEN)  Boot stack:    ffffffff82846000->ffffffff82847000
1539(XEN)  TOTAL:         ffffffff80000000->ffffffff82c00000
1540(XEN)  ENTRY ADDRESS: ffffffff8257e180
1541(XEN) Dom0 has maximum 4 VCPUs
1542(XEN) ELF: phdr 0 at 0xffffffff81000000 -> 0xffffffff822aa000
1543(XEN) ELF: phdr 1 at 0xffffffff82400000 -> 0xffffffff8255b000
1544(XEN) ELF: phdr 2 at 0xffffffff8255b000 -> 0xffffffff8257d858
1545(XEN) ELF: phdr 3 at 0xffffffff8257e000 -> 0xffffffff826f9000
1546(XEN) Initial low memory virq threshold set at 0x4000 pages.
1547(XEN) Scrubbing Free RAM in background
1548(XEN) Std. Loglevel: All
1549(XEN) Guest Loglevel: All
1550(XEN) *** Serial input to DOM0 (type 'CTRL-a' three times to switch input)
1551(XEN) Freed 540kB init memory
1552mapping kernel into physical memory
1553about to get started...
1554Linux version 4.19.78-yocto-standard (oe-user@oe-host) (gcc version 9.2.0 (GCC)) #1 SMP PREEMPT Wed Feb 19 16:32:09 UTC 2020
1555Command line: console=hvc0 earlyprintk=xen nomodeset root=/dev/sda2
1556x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers'
1557x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'
1558x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers'
1559x86/fpu: xstate_offset[2]:  576, xstate_sizes[2]:  256
1560x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'standard' format.
1561Released 0 page(s)
1562BIOS-provided physical RAM map:
1563Xen: [mem 0x0000000000000000-0x0000000000000fff] reserved
1564Xen: [mem 0x0000000000001000-0x000000000009ffff] usable
1565Xen: [mem 0x00000000000a0000-0x00000000000fffff] reserved
1566Xen: [mem 0x0000000000100000-0x00000000cfe70fff] usable
1567Xen: [mem 0x00000000cfe71000-0x00000000cfffffff] reserved
1568Xen: [mem 0x00000000f7e00000-0x00000000f7e03fff] reserved
1569Xen: [mem 0x00000000f8000000-0x00000000fbffffff] reserved
1570Xen: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
1571Xen: [mem 0x00000000fec20000-0x00000000fec20fff] reserved
1572Xen: [mem 0x00000000fed40000-0x00000000fed44fff] reserved
1573Xen: [mem 0x00000000fee00000-0x00000000feefffff] reserved
1574Xen: [mem 0x0000000100000000-0x000000012effffff] usable
1575NX (Execute Disable) protection: active
1576SMBIOS 2.8 present.
1577DMI: PC Engines apu2/apu2, BIOS v4.10.0.2 02/24/2020
1578Hypervisor detected: Xen PV
1579tsc: Detected 998.153 MHz processor
1580last_pfn = 0x12f000 max_arch_pfn = 0x400000000
1581Disabled
1582x86/PAT: MTRRs disabled, skipping PAT initialization too.
1583x86/PAT: Configuration [0-7]: WB  WT  UC- UC  WC  WP  UC  UC  
1584last_pfn = 0xcfe71 max_arch_pfn = 0x400000000
1585Scanning 1 areas for low memory corruption
1586ACPI: Early table checksum verification disabled
1587ACPI: RSDP 0x00000000000F0800 000024 (v02 COREv4)
1588ACPI: XSDT 0x00000000CFE820E0 000074 (v01 COREv4 COREBOOT 00000000 CORE 20180531)
1589ACPI: FACP 0x00000000CFE83D80 0000F4 (v04 COREv4 COREBOOT 00000000 CORE 20180531)
1590ACPI: DSDT 0x00000000CFE82280 001AF6 (v02 COREv4 COREBOOT 00010001 INTL 20180531)
1591ACPI: FACS 0x00000000CFE82240 000040
1592ACPI: SSDT 0x00000000CFE83E80 0001E5 (v02 COREv4 COREBOOT 0000002A CORE 20180531)
1593ACPI: MCFG 0x00000000CFE84070 00003C (v01 COREv4 COREBOOT 00000000 CORE 20180531)
1594ACPI: TPM2 0x00000000CFE840B0 00004C (v04 COREv4 COREBOOT 00000000 CORE 20180531)
1595ACPI: APIC 0x00000000CFE84100 00007E (v02 COREv4 COREBOOT 00000000 CORE 20180531)
1596ACPI: HEST 0x00000000CFE84180 0001D0 (v01 COREv4 COREBOOT 00000000 CORE 20180531)
1597ACPI: IVRS 0x00000000CFE84350 0000D0 (v01 COREv4 COREBOOT 00000000 CORE 20180531)
1598ACPI: SSDT 0x00000000CFE84420 0048A6 (v02 AMD    AGESA    00000002 MSFT 04000000)
1599ACPI: SSDT 0x00000000CFE88CD0 0007C8 (v01 AMD    AGESA    00000001 AMD  00000001)
1600ACPI: HPET 0x00000000CFE894A0 000038 (v01 COREv4 COREBOOT 00000000 CORE 20180531)
1601Setting APIC routing to Xen PV.
1602Zone ranges:
1603  DMA      [mem 0x0000000000001000-0x0000000000ffffff]
1604  DMA32    [mem 0x0000000001000000-0x00000000ffffffff]
1605  Normal   [mem 0x0000000100000000-0x000000012effffff]
1606Movable zone start for each node
1607Early memory node ranges
1608  node   0: [mem 0x0000000000001000-0x000000000009ffff]
1609  node   0: [mem 0x0000000000100000-0x00000000cfe70fff]
1610  node   0: [mem 0x0000000100000000-0x000000012effffff]
1611Reserved but unavailable: 1 pages
1612Initmem setup node 0 [mem 0x0000000000001000-0x000000012effffff]
1613p2m virtual area at (____ptrval____), size is a00000
1614Remapped 97 page(s)
1615ACPI: PM-Timer IO Port: 0x818
1616ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1])
1617IOAPIC[0]: apic_id 4, version 33, address 0xfec00000, GSI 0-23
1618IOAPIC[1]: apic_id 5, version 33, address 0xfec20000, GSI 24-55
1619ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
1620ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
1621Using ACPI (MADT) for SMP configuration information
1622ACPI: HPET id: 0x10228201 base: 0xfed00000
1623smpboot: Allowing 4 CPUs, 0 hotplug CPUs
1624[mem 0xd0000000-0xf7dfffff] available for PCI devices
1625Booting paravirtualized kernel on Xen
1626Xen version: 4.13-unstable (preserve-AD)
1627clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1910969940391419 ns
1628random: get_random_bytes called from start_kernel+0x97/0x4ce with crng_init=0
1629setup_percpu: NR_CPUS:64 nr_cpumask_bits:64 nr_cpu_ids:4 nr_node_ids:1
1630percpu: Embedded 44 pages/cpu s141400 r8192 d30632 u524288
1631Built 1 zonelists, mobility grouping on.  Total pages: 1027649
1632Kernel command line: console=hvc0 earlyprintk=xen nomodeset root=/dev/sda2
1633You have booted with nomodeset. This means your GPU drivers are DISABLED
1634Any video related functionality will be severely degraded, and you may not even be able to suspend the system properly
1635Unless you actually understand what nomodeset does, you should reboot without enabling it
1636Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
1637Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
1638software IO TLB: mapped [mem 0x16800000-0x1a800000] (64MB)
1639Memory: 344676K/4175936K available (14348K kernel code, 1295K rwdata, 2728K rodata, 1616K init, 1052K bss, 3831260K reserved, 0K cma-reserved)
1640SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
1641ftrace: allocating 38930 entries in 153 pages
1642rcu: Preemptible hierarchical RCU implementation.
1643rcu: 	RCU restricting CPUs from NR_CPUS=64 to nr_cpu_ids=4.
1644	Tasks RCU enabled.
1645rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
1646Using NULL legacy PIC
1647NR_IRQS: 4352, nr_irqs: 1000, preallocated irqs: 0
1648xen:events: Using FIFO-based ABI
1649Console: colour dummy device 80x25
1650console [tty0] enabled
1651console [hvc0] enabled
1652ACPI: Core revision 20180810
1653clocksource: xen: mask: 0xffffffffffffffff max_cycles: 0x1cd42e4dffb, max_idle_ns: 881590591483 ns
1654installing Xen timer for CPU 0
1655clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x1cc68cb299e, max_idle_ns: 881590467963 ns
1656Calibrating delay loop (skipped), value calculated using timer frequency.. 1996.30 BogoMIPS (lpj=998153)
1657pid_max: default: 32768 minimum: 301
1658Security Framework initialized
1659Mount-cache hash table entries: 8192 (order: 4, 65536 bytes)
1660Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes)
1661Last level iTLB entries: 4KB 512, 2MB 8, 4MB 4
1662Last level dTLB entries: 4KB 512, 2MB 256, 4MB 128, 1GB 0
1663Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization
1664Spectre V2 : Mitigation: Full AMD retpoline
1665Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch
1666Speculative Store Bypass: Mitigation: Speculative Store Bypass disabled via prctl and seccomp
1667Freeing SMP alternatives memory: 40K
1668VPMU disabled by hypervisor.
1669Performance Events: PMU not available due to virtualization, using software events only.
1670rcu: Hierarchical SRCU implementation.
1671MCE: In-kernel MCE decoding enabled.
1672smp: Bringing up secondary CPUs ...
1673installing Xen timer for CPU 1
1674installing Xen timer for CPU 2
1675installing Xen timer for CPU 3
1676smp: Brought up 1 node, 4 CPUs
1677smpboot: Max logical packages: 1
1678devtmpfs: initialized
1679clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275000 ns
1680futex hash table entries: 1024 (order: 4, 65536 bytes)
1681xor: automatically using best checksumming function   avx       
1682pinctrl core: initialized pinctrl subsystem
1683NET: Registered protocol family 16
1684xen:grant_table: Grant tables using version 1 layout
1685Grant table initialized
1686ACPI: bus type PCI registered
1687PCI: MMCONFIG for domain 0000 [bus 00-40] at [mem 0xf8000000-0xfc0fffff] (base 0xf8000000)
1688PCI: MMCONFIG at [mem 0xf8000000-0xfc0fffff] reserved in E820
1689PCI: MMCONFIG for 0000 [bus00-1f] at [mem 0xf8000000-0xf9ffffff] (base 0xf8000000) (size reduced!)
1690(XEN) d0: Forcing write emulation on MFNs f8000-f9fff
1691(XEN) d0: Forcing read-only access to MFN f8002
1692PCI: Using configuration type 1 for base access
1693random: fast init done
1694raid6: sse2x1   gen()  1140 MB/s
1695raid6: sse2x1   xor()   792 MB/s
1696raid6: sse2x2   gen()  1320 MB/s
1697raid6: sse2x2   xor()  1031 MB/s
1698raid6: sse2x4   gen()  1656 MB/s
1699raid6: sse2x4   xor()  1078 MB/s
1700raid6: using algorithm sse2x4 gen() 1656 MB/s
1701raid6: .... xor() 1078 MB/s, rmw enabled
1702raid6: using ssse3x2 recovery algorithm
1703ACPI: Added _OSI(Module Device)
1704ACPI: Added _OSI(Processor Device)
1705ACPI: Added _OSI(3.0 _SCP Extensions)
1706ACPI: Added _OSI(Processor Aggregator Device)
1707ACPI: Added _OSI(Linux-Dell-Video)
1708ACPI: Added _OSI(Linux-Lenovo-NV-HDMI-Audio)
1709ACPI: 4 ACPI AML tables successfully acquired and loaded
1710ACPI: Interpreter enabled
1711ACPI: (supports S0 S1 S5)
1712ACPI: Using IOAPIC for interrupt routing
1713PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
1714ACPI: Enabled 7 GPEs in block 00 to 1F
1715ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
1716acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
1717acpi PNP0A08:00: _OSC: OS now controls [PME AER PCIeCapability LTR]
1718acpi PNP0A08:00: [Firmware Info]: MMCONFIG for domain 0000 [bus 00-1f] only partially covers this bridge
1719acpi PNP0A08:00: host bridge window expanded to [io  0x0000-0x0cf7 window]; [io  0x03b0-0x03df window] ignored
1720PCI host bridge to bus 0000:00
1721pci_bus 0000:00: root bus resource [io  0x0000-0x0cf7 window]
1722pci_bus 0000:00: root bus resource [io  0x0d00-0xffff window]
1723pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
1724pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000dffff]
1725pci_bus 0000:00: root bus resource [mem 0xd0000000-0xffffffff]
1726pci_bus 0000:00: root bus resource [bus 00-ff]
1727(XEN) PCI add device 0000:00:00.0
1728(XEN) PCI add device 0000:00:00.2
1729(XEN) PCI add device 0000:00:02.0
1730(XEN) PCI add device 0000:00:02.2
1731(XEN) PCI add device 0000:00:02.3
1732(XEN) PCI add device 0000:00:02.4
1733(XEN) PCI add device 0000:00:02.5
1734(XEN) PCI add device 0000:00:08.0
1735(XEN) PCI add device 0000:00:10.0
1736(XEN) SR-IOV device 0000:00:11.0 has its virtual functions already enabled (01ab)
1737(XEN) PCI add device 0000:00:11.0
1738(XEN) PCI add device 0000:00:13.0
1739(XEN) PCI add device 0000:00:14.0
1740(XEN) PCI add device 0000:00:14.3
1741(XEN) PCI add device 0000:00:14.7
1742(XEN) PCI add device 0000:00:18.0
1743(XEN) PCI add device 0000:00:18.1
1744(XEN) PCI add device 0000:00:18.2
1745(XEN) PCI add device 0000:00:18.3
1746(XEN) PCI add device 0000:00:18.4
1747(XEN) PCI add device 0000:00:18.5
1748(XEN) PCI add device 0000:01:00.0
1749pci 0000:00:02.2: PCI bridge to [bus 01]
1750(XEN) PCI add device 0000:02:00.0
1751pci 0000:00:02.3: PCI bridge to [bus 02]
1752(XEN) PCI add device 0000:03:00.0
1753pci 0000:00:02.4: PCI bridge to [bus 03]
1754(XEN) PCI add device 0000:04:00.0
1755pci 0000:00:02.5: PCI bridge to [bus 04]
1756ACPI: PCI Interrupt Link [INTA] (IRQs *3 4 5 7 10 11 12 15)
1757ACPI: PCI Interrupt Link [INTB] (IRQs *3 4 5 7 10 11 12 15)
1758ACPI: PCI Interrupt Link [INTC] (IRQs 3 4 *5 7 10 11 12 15)
1759ACPI: PCI Interrupt Link [INTD] (IRQs 3 4 5 *7 10 11 12 15)
1760ACPI: PCI Interrupt Link [INTE] (IRQs 3 4 5 7 10 *11 12 15)
1761ACPI: PCI Interrupt Link [INTF] (IRQs 9) *10
1762ACPI: PCI Interrupt Link [INTG] (IRQs 3 4 5 7 10 11 12 15) *0
1763ACPI: PCI Interrupt Link [INTH] (IRQs 3 4 5 7 10 11 12 15) *0
1764xen:balloon: Initialising balloon driver
1765vgaarb: loaded
1766SCSI subsystem initialized
1767ACPI: bus type USB registered
1768usbcore: registered new interface driver usbfs
1769usbcore: registered new interface driver hub
1770usbcore: registered new device driver usb
1771pps_core: LinuxPPS API ver. 1 registered
1772pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
1773PTP clock support registered
1774EDAC MC: Ver: 3.0.0
1775Advanced Linux Sound Architecture Driver Initialized.
1776PCI: Using ACPI for IRQ routing
1777Bluetooth: Core ver 2.22
1778NET: Registered protocol family 31
1779Bluetooth: HCI device and connection manager initialized
1780Bluetooth: HCI socket layer initialized
1781Bluetooth: L2CAP socket layer initialized
1782Bluetooth: SCO socket layer initialized
1783clocksource: Switched to clocksource tsc-early
1784pnp: PnP ACPI init
1785system 00:00: [mem 0xfec10002-0xfec11001] has been reserved
1786Already setup the GSI :4
1787pnp: PnP ACPI: found 5 devices
1788PM-Timer failed consistency check  (0xffffff) - aborting.
1789pci 0000:00:02.2: PCI bridge to [bus 01]
1790pci 0000:00:02.2:   bridge window [io  0x1000-0x1fff]
1791pci 0000:00:02.2:   bridge window [mem 0xf7900000-0xf79fffff]
1792pci 0000:00:02.3: PCI bridge to [bus 02]
1793pci 0000:00:02.3:   bridge window [io  0x2000-0x2fff]
1794pci 0000:00:02.3:   bridge window [mem 0xf7a00000-0xf7afffff]
1795pci 0000:00:02.4: PCI bridge to [bus 03]
1796pci 0000:00:02.4:   bridge window [io  0x3000-0x3fff]
1797pci 0000:00:02.4:   bridge window [mem 0xf7b00000-0xf7bfffff]
1798pci 0000:00:02.5: PCI bridge to [bus 04]
1799pci 0000:00:02.5:   bridge window [mem 0xf7600000-0xf78fffff]
1800NET: Registered protocol family 2
1801tcp_listen_portaddr_hash hash table entries: 2048 (order: 3, 32768 bytes)
1802TCP established hash table entries: 32768 (order: 6, 262144 bytes)
1803TCP bind hash table entries: 32768 (order: 7, 524288 bytes)
1804TCP: Hash tables configured (established 32768 bind 32768)
1805UDP hash table entries: 2048 (order: 4, 65536 bytes)
1806UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
1807NET: Registered protocol family 1
1808RPC: Registered named UNIX socket transport module.
1809RPC: Registered udp transport module.
1810RPC: Registered tcp transport module.
1811RPC: Registered tcp NFSv4.1 backchannel transport module.
1812Already setup the GSI :18
1813pci 0000:00:13.0: PME# does not work under D3, disabling it
1814Machine check injector initialized
1815Scanning for low memory corruption every 60 seconds
1816Initialise system trusted keyrings
1817workingset: timestamp_bits=46 max_order=17 bucket_order=0
1818NFS: Registering the id_resolver key type
1819Key type id_resolver registered
1820Key type id_legacy registered
1821Key type asymmetric registered
1822Asymmetric key parser 'x509' registered
1823Block layer SCSI generic (bsg) driver version 0.4 loaded (major 249)
1824io scheduler noop registered
1825io scheduler deadline registered
1826io scheduler cfq registered (default)
1827io scheduler mq-deadline registered
1828io scheduler kyber registered
1829pcieport 0000:00:02.2: AER enabled with IRQ 82
1830pcieport 0000:00:02.3: AER enabled with IRQ 83
1831pcieport 0000:00:02.4: AER enabled with IRQ 84
1832pcieport 0000:00:02.5: AER enabled with IRQ 85
1833pcieport 0000:00:02.2: Signaling PME with IRQ 82
1834pcieport 0000:00:02.3: Signaling PME with IRQ 83
1835pcieport 0000:00:02.4: Signaling PME with IRQ 84
1836pcieport 0000:00:02.5: Signaling PME with IRQ 85
1837input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
1838ACPI: Power Button [PWRB]
1839input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
1840ACPI: Power Button [PWRF]
1841xen:xen_evtchn: Event-channel device installed
1842xen_mcelog: /dev/mcelog registered by Xen
1843Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
184400:03: ttyS1 at I/O 0x2f8 (irq = 3, base_baud = 115200) is a 16550A
1845tpm_tis 00:04: 2.0 TPM (device-id 0x1A, rev-id 16)
1846brd: module loaded
1847loop: module loaded
1848Uniform Multi-Platform E-IDE driver
1849ide-gd driver 1.18
1850ide-cd driver 5.00
1851ahci 0000:00:11.0: AHCI 0001.0300 32 slots 2 ports 6 Gbps 0x3 impl SATA mode
1852ahci 0000:00:11.0: flags: 64bit ncq sntf ilck pm led clo pmp fbs pio slum part 
1853scsi host0: ahci
1854scsi host1: ahci
1855ata1: SATA max UDMA/133 abar m1024@0xf7ea5000 port 0xf7ea5100 irq 19
1856ata2: SATA max UDMA/133 abar m1024@0xf7ea5000 port 0xf7ea5180 irq 19
1857e100: Intel(R) PRO/100 Network Driver, 3.5.24-k2-NAPI
1858e100: Copyright(c) 1999-2006 Intel Corporation
1859e1000: Intel(R) PRO/1000 Network Driver - version 7.3.21-k8-NAPI
1860e1000: Copyright (c) 1999-2006 Intel Corporation.
1861e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k
1862e1000e: Copyright(c) 1999 - 2015 Intel Corporation.
1863igb: Intel(R) Gigabit Ethernet Network Driver - version 5.4.0-k
1864igb: Copyright (c) 2007-2014 Intel Corporation.
1865pps pps0: new PPS source ptp0
1866igb 0000:01:00.0: added PHC on eth0
1867igb 0000:01:00.0: Intel(R) Gigabit Ethernet Network Connection
1868igb 0000:01:00.0: eth0: (PCIe:2.5Gb/s:Width x1) 00:0d:b9:43:3f:bc
1869igb 0000:01:00.0: eth0: PBA No: FFFFFF-0FF
1870igb 0000:01:00.0: Using MSI-X interrupts. 4 rx queue(s), 4 tx queue(s)
1871pps pps1: new PPS source ptp1
1872igb 0000:02:00.0: added PHC on eth1
1873igb 0000:02:00.0: Intel(R) Gigabit Ethernet Network Connection
1874igb 0000:02:00.0: eth1: (PCIe:2.5Gb/s:Width x1) 00:0d:b9:43:3f:bd
1875igb 0000:02:00.0: eth1: PBA No: FFFFFF-0FF
1876igb 0000:02:00.0: Using MSI-X interrupts. 4 rx queue(s), 4 tx queue(s)
1877pps pps2: new PPS source ptp2
1878igb 0000:03:00.0: added PHC on eth2
1879igb 0000:03:00.0: Intel(R) Gigabit Ethernet Network Connection
1880igb 0000:03:00.0: eth2: (PCIe:2.5Gb/s:Width x1) 00:0d:b9:43:3f:be
1881igb 0000:03:00.0: eth2: PBA No: FFFFFF-0FF
1882igb 0000:03:00.0: Using MSI-X interrupts. 4 rx queue(s), 4 tx queue(s)
1883xen_netfront: Initialising Xen virtual ethernet driver
1884ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
1885ehci-pci: EHCI PCI platform driver
1886Already setup the GSI :18
1887ehci-pci 0000:00:13.0: EHCI Host Controller
1888ehci-pci 0000:00:13.0: new USB bus registered, assigned bus number 1
1889ehci-pci 0000:00:13.0: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
1890ehci-pci 0000:00:13.0: debug port 2
1891ehci-pci 0000:00:13.0: irq 18, io mem 0xf7ea6000
1892ehci-pci 0000:00:13.0: USB 2.0 started, EHCI 1.00
1893hub 1-0:1.0: USB hub found
1894hub 1-0:1.0: 2 ports detected
1895ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
1896ohci-pci: OHCI PCI platform driver
1897uhci_hcd: USB Universal Host Controller Interface driver
1898Already setup the GSI :18
1899xhci_hcd 0000:00:10.0: xHCI Host Controller
1900xhci_hcd 0000:00:10.0: new USB bus registered, assigned bus number 2
1901ata2: SATA link down (SStatus 0 SControl 300)
1902usb 1-1: new high-speed USB device number 2 using ehci-pci
1903ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
1904ata1.00: native sectors (28867584) is smaller than sectors (29832192)
1905ata1.00: ATA-9: SanDisk SSD i110 16GB, i21J719, max UDMA/133
1906ata1.00: 29832192 sectors, multi 1: LBA48 NCQ (depth 32)
1907ata1.00: configured for UDMA/133
1908scsi 0:0:0:0: Direct-Access     ATA      SanDisk SSD i110 719  PQ: 0 ANSI: 5
1909sd 0:0:0:0: [sda] 29832192 512-byte logical blocks: (15.3 GB/14.2 GiB)
1910sd 0:0:0:0: [sda] Write Protect is off
1911sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
1912 sda: sda1 sda2
1913sd 0:0:0:0: [sda] Attached SCSI disk
1914hub 1-1:1.0: USB hub found
1915hub 1-1:1.0: 4 ports detected
1916xhci_hcd 0000:00:10.0: hcc params 0x014040c3 hci version 0x100 quirks 0x0000000000000410
1917hub 2-0:1.0: USB hub found
1918hub 2-0:1.0: 2 ports detected
1919xhci_hcd 0000:00:10.0: xHCI Host Controller
1920xhci_hcd 0000:00:10.0: new USB bus registered, assigned bus number 3
1921xhci_hcd 0000:00:10.0: Host supports USB 3.0 SuperSpeed
1922usb usb3: We don't know the algorithms for LPM for this host, disabling LPM.
1923hub 3-0:1.0: USB hub found
1924hub 3-0:1.0: 2 ports detected
1925usbcore: registered new interface driver usb-storage
1926usbcore: registered new interface driver usbserial_generic
1927usbserial: USB Serial support registered for generic
1928usbcore: registered new interface driver ftdi_sio
1929usbserial: USB Serial support registered for FTDI USB Serial Device
1930usbcore: registered new interface driver pl2303
1931usbserial: USB Serial support registered for pl2303
1932i8042: PNP: No PS/2 controller found.
1933i8042: Probing ports directly.
1934clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x1cc68cb299e, max_idle_ns: 881590467963 ns
1935clocksource: Switched to clocksource tsc
1936i8042: No controller found
1937mousedev: PS/2 mouse device common for all mice
1938rtc_cmos 00:01: RTC can wake from S4
1939rtc_cmos 00:01: registered as rtc0
1940rtc_cmos 00:01: alarms up to one day, 114 bytes nvram
1941device-mapper: ioctl: 4.39.0-ioctl (2018-04-03) initialised: dm-devel@redhat.com
1942EDAC amd64: Node 0: DRAM ECC enabled.
1943EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load.
1944 Either enable ECC checking or force module loading by setting 'ecc_enable_override'.
1945 (Note that use of the override may cause unknown side effects.)
1946sdhci: Secure Digital Host Controller Interface driver
1947sdhci: Copyright(c) Pierre Ossman
1948sdhci-pci 0000:00:14.7: SDHCI controller found [1022:7813] (rev 1)
1949mmc0: SDHCI controller on PCI [0000:00:14.7] using ADMA 64-bit
1950sdhci-pltfm: SDHCI platform and OF driver helper
1951usbcore: registered new interface driver usbhid
1952usbhid: USB HID core driver
1953x86/pm: family 0x16 cpu detected, MSR saving is needed during suspending.
1954u32 classifier
1955    Actions configured
1956NET: Registered protocol family 10
1957Segment Routing with IPv6
1958sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver
1959NET: Registered protocol family 17
1960Key type dns_resolver registered
1961mce: Using 2 MCE banks
1962sched_clock: Marking stable (5847674138, 24933781)->(5894420258, -21812339)
1963Loading compiled-in X.509 certificates
1964Btrfs loaded, crc32c=crc32c-generic
1965Key type encrypted registered
1966console [netcon0] enabled
1967netconsole: network logging started
1968rtc_cmos 00:01: setting system clock to 2020-02-24 01:00:20 UTC (1582506020)
1969ALSA device list:
1970  No soundcards found.
1971md: Waiting for all devices to be available before autodetect
1972md: If you don't use raid, use raid=noautodetect
1973md: Autodetecting RAID arrays.
1974md: autorun ...
1975md: ... autorun DONE.
1976EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: (null)
1977VFS: Mounted root (ext4 filesystem) on device 8:2.
1978devtmpfs: mounted
1979Freeing unused kernel image memory: 1616K
1980Write protecting the kernel read-only data: 20480k
1981Freeing unused kernel image memory: 2012K
1982Freeing unused kernel image memory: 1368K
1983Run /sbin/init as init process
1984usb 2-1: new high-speed USB device number 2 using xhci_hcd
1985mmc0: new ultra high speed SDR104 SDHC card at address aaaa
1986mmcblk0: mmc0:aaaa SC16G 14.8 GiB 
1987systemd[1]: systemd 243+ running in system mode. (-PAM -AUDIT -SELINUX +IMA -APPARMOR +SMACK +SYSVINIT +UTMP -LIBCRYPTSETUP -GCRYPT -GNUTLS +ACL +XZ -LZ4 -SECCOMP +BLKID -ELFUTILS +KMOD -IDN2 -IDN -PCRE2 default-hierarchy=hybrid)
1988systemd[1]: Detected architecture x86-64.
1989
1990Welcome to Reference Yocto distro for PC Engines hardware 0.1 (zeus)!
1991
1992usb-storage 2-1:1.0: USB Mass Storage device detected
1993systemd[1]: Set hostname to <pcengines-apu2>.
1994scsi host2: usb-storage 2-1:1.0
1995usb 2-2: new high-speed USB device number 3 using xhci_hcd
1996usb-storage 2-2:1.0: USB Mass Storage device detected
1997scsi host3: usb-storage 2-2:1.0
1998systemd[1]: /lib/systemd/system/xen-qemu-dom0-disk-backend.service:11: PIDFile= references a path below legacy directory /var/run/, updating /var/run/xen/qemu-dom0.pid → /run/xen/qemu-dom0.pid; please update the unit file accordingly.
1999systemd[1]: /lib/systemd/system/dbus.socket:5: ListenStream= references a path below legacy directory /var/run/, updating /var/run/dbus/system_bus_socket → /run/dbus/system_bus_socket; please update the unit file accordingly.
2000random: systemd: uninitialized urandom read (16 bytes read)
2001systemd[1]: Created slice system-getty.slice.
2002[  OK  ] Created slice system-getty.slice.
2003random: systemd: uninitialized urandom read (16 bytes read)
2004systemd[1]: Created slice system-serial\x2dgetty.slice.
2005[  OK  ] Created slice system-serial\x2dgetty.slice.
2006random: systemd: uninitialized urandom read (16 bytes read)
2007systemd[1]: Created slice User and Session Slice.
2008[  OK  ] Created slice User and Session Slice.
2009systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
2010[  OK  ] Started Dispatch Password …ts to Console Directory Watch.
2011systemd[1]: Started Forward Password Requests to Wall Directory Watch.
2012[  OK  ] Started Forward Password R…uests to Wall Directory Watch.
2013[  OK  ] Reached target Paths.
2014[  OK  ] Reached target Remote File Systems.
2015[  OK  ] Reached target Slices.
2016[  OK  ] Reached target Swap.
2017[  OK  ] Listening on initctl Compatibility Named Pipe.
2018[  OK  ] Listening on Journal Socket (/dev/log).
2019[  OK  ] Listening on Journal Socket.
2020[  OK  ] Listening on Network Service Netlink Socket.
2021[  OK  ] Listening on udev Control Socket.
2022[  OK  ] Listening on udev Kernel Socket.
2023         Mounting POSIX Message Queue File System...
2024         Mounting Mount /proc/xen files...
2025         Mounting Kernel Debug File System...
2026         Mounting Temporary Directory (/tmp)...
2027         Starting Create list of st…odes for the current kernel...
2028[  OK  ] Started Hardware RNG Entropy Gatherer Daemon.
2029         Starting Journal Service...
2030         Starting Load Kernel Modules...
2031         Starting Remount Root and Kernel File Systems...
2032         Starting udev Coldplug all Devices...
2033[  OK  ] Mounted POSIX Message Queue File System.
2034[  OK  ] Mounted Mount /proc/xen files.
2035[  OK  ] Mounted Kernel Debug File System.
2036[  OK  ] Mounted Temporary Directory (/tmp).
2037[  OK  ] Started Create list of sta… nodes for the current kernel.
2038xen_pciback: backend is vpci
2039xen_wdt xen_wdt: initialized (timeout=60s, nowayout=0)
2040[  OK  ] Started Load Kernel Modules.
2041         Starting Apply Kernel Variables...
2042EXT4-fs (sda2): re-mounted. Opts: (null)
2043[  OK  ] Started Remount Root and Kernel File Systems.
2044         Starting Create Static Device Nodes in /dev...
2045[  OK  ] Started Apply Kernel Variables.
2046[  OK  ] Started Create Static Device Nodes in /dev.
2047[  OK  ] Reached target Local File Systems (Pre).
2048scsi 2:0:0:0: Di         rect-Access     SanDisk  Ultra USB 3.0    1.00 PQ: 0 ANSI: 6
2049Mounting mount xenstore file system...
2050sd 2:0:0:0: [sdb] 30031250 512-byte logical blocks: (15.4 GB/14.3 GiB)
2051sd 2:0:0:0: [sdb] Write Protect is off
2052sd 2:0:0:0: [sdb] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
2053random: crng init done
2054random: 7 urandom warning(s) missed due to ratelimiting
2055 sdb: sdb1 sdb2 < sdb5 >
2056sd 2:0:0:0: [sdb] Attached SCSI removable disk
2057         Mounting /var/volatile...
2058         Starting udev Kernel Device Manager...
2059[  OK  ] Mounted mount xenstore file system.
2060[  OK  ] Mounted /var/volatile.
2061         Starting Load/Save Random Seed...
2062[  OK  ] Started Load/Save Random Seed.
2063[  OK  ] Started Journal Service.
2064         Starting Flush Journal to Persistent Storage...
2065scsi 3:0:0:0: Direct-Access     SanDisk  Ultra USB 3.0    1.00 PQ: 0 ANSI: 6
2066sd 3:0:0:0: [sdc] 30031872 512-byte logical blocks: (15.4 GB/14.3 GiB)
2067sd 3:0:0:0: [sdc] Write Protect is off
2068sd 3:0:0:0: [sdc] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
2069sd 3:0:0:0: [sdc] Attached SCSI removable disk
2070systemd-journald[128]: Received client request to flush runtime journal.
2071[  OK  ] Started Flush Journal to Persistent Storage.
2072[  OK  ] Started udev Kernel Device Manager.
2073         Starting Network Service...
2074bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this.
2075[  OK  ] Started Network Service.
2076IPv6: ADDRCONF(NETDEV_UP): xenbr0: link is not ready
2077[  OK  ] Started udev Coldplug all Devices.
2078igb 0000:01:00.0 enp1s0: renamed from eth0
2079igb 0000:02:00.0 enp2s0: renamed from eth1
2080igb 0000:03:00.0 enp3s0: renamed from eth2
2081cfg80211: Loading compiled-in X.509 certificates for regulatory database
2082cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
2083platform regulatory.0: Direct firmware load for regulatory.db failed with error -2
2084cfg80211: failed to load regulatory.db
2085ath10k_pci 0000:04:00.0: pci irq msi oper_irq_mode 2 irq_mode 0 reset_mode 0
2086xenbr0: port 1(enp2s0) entered blocking state
2087xenbr0: port 1(enp2s0) entered disabled state
2088device enp2s0 entered promiscuous mode
2089IPv6: ADDRCONF(NETDEV_UP): enp2s0: link is not ready
2090ath10k_pci 0000:04:00.0: qca988x hw2.0 target 0x4100016c chip_id 0x043202ff sub 0000:0000
2091ath10k_pci 0000:04:00.0: kconfig debug 0 debugfs 0 tracing 0 dfs 1 testmode 0
2092ath10k_pci 0000:04:00.0: firmware ver 10.2.4-1.0-00045 api 5 features no-p2p,raw-mode,mfp,allows-mesh-bcast crc32 ccbd5104
2093ath10k_pci 0000:04:00.0: board_file api 1 bmi_id N/A crc32 bebc7c08
2094[  OK  ] Found device SanDisk_SSD_i110_16GB boot.
2095         Mounting /boot...
2096EXT4-fs (sda1): recovery complete
2097EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
2098[  OK  ] Mounted /boot.
2099[  OK  ] Reached target Local File Systems.
2100         Starting Create Volatile Files and Directories...
2101[  OK  ] Started Create Volatile Files and Directories.
2102         Starting Network Name Resolution...
2103         Starting Network Time Synchronization...
2104         Starting Update UTMP about System Boot/Shutdown...
2105[  OK  ] Started Update UTMP about System Boot/Shutdown.
2106[  OK  ] Started Network Name Resolution.
2107[  OK  ] Reached target Network.
2108[  OK  ] Reached target Host and Network Name Lookups.
2109[  OK  ] Started Network Time Synchronization.
2110[  OK  ] Reached target System Initialization.
2111[  OK  ] Started Daily Cleanup of Temporary Directories.
2112[  OK  ] Reached target System Time Set.
2113[  OK  ] Reached target System Time Synchronized.
2114[  OK  ] Reached target Timers.
2115[  OK  ] Listening on D-Bus System Message Bus Socket.
2116         Starting sshd.socket.
2117[  OK  ] Listening on sshd.socket.
2118[  OK  ] Reached target Sockets.
2119[  OK  ] Reached target Basic System.
2120[  OK  ] Started D-Bus System Message Bus.
2121[  OK  ] Started Getty on tty1.
2122[  OK  ] Started Serial Getty on hvc0.
2123[  OK  ] Reached target Login Prompts.
2124         Starting Login Service...
2125         Starting The Xen xenstore...
2126[  OK  ] Started Xinetd A Powerful Replacement For Inetd.
2127ath10k_pci 0000:04:00.0: htt-ver 2.1 wmi-op 5 htt-op 2 cal otp max-sta 128 raw 0 hwcrypto 1
2128[  OK  ] Started The Xen xenstore.
2129         Starting xen-init-dom0, in…s, JSON configuration stub)...
2130         Starting Xenconsoled - han…est consoles and hypervisor...
2131ath10k_pci 0000:04:00.0 wlp4s0: renamed from wlan0
2132[  OK  ] Started Login Service.
2133[  OK  ] Started Xenconsoled - hand…guest consoles and hypervisor.
2134         Starting qemu for xen dom0 disk backend...
2135[  OK  ] Started xen-init-dom0, ini…des, JSON configuration stub).
2136[  OK  ] Started qemu for xen dom0 disk backend.
2137         Starting Xendomains - star…guests on boot and shutdown...
2138igb 0000:02:00.0 enp2s0: igb: enp2s0 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: RX/TX
2139[  OK  ] Started Xendomains - start…p guests on boot and shutdown.
2140         Starting Xen-watchdog - run xen watchdog daemon...
2141[  OK  ] Started Xen-watchdog - run xen watchdog daemon.
2142[  OK  ] Reached target Multi-User System.
2143         Starting Update UTMP about System Runlevel Changes...
2144IPv6: ADDRCONF(NETDEV_CHANGE): enp2s0: link becomes ready
2145xenbr0: port 1(enp2s0) entered blocking state
2146xenbr0: port 1(enp2s0) entered forwarding state
2147IPv6: ADDRCONF(NETDEV_CHANGE): xenbr0: link becomes ready
2148         Starting Hostname Service...
2149[  OK  ] Started Update UTMP about System Runlevel Changes.
2150[  OK  ] Started Hostname Service.
2151
2152Reference Yocto distro for PC Engines hardware 0.1 pcengines-apu2 hvc0
2153
2154pcengines-apu2 login: root
2155root@pcengines-apu2:~# ls
2156cbmem  opnsense.cfg  vms.sh
2157root@pcengines-apu2:~# ./vms.sh 
2158Starting 2.4GHz WiFi Access Point...
2159ath10k_pci 0000:04:00.0: pdev param 0 not supported by firmware
2160IPv6: ADDRCONF(NETDEV_UP): wlp4s0: link is not ready
2161xenbr0: port 2(wlp4s0) entered blocking state
2162xenbr0: port 2(wlp4s0) entered disabled state
2163device wlp4s0 entered promiscuous mode
2164xenbr0: port 2(wlp4s0) entered blocking state
2165xenbr0: port 2(wlp4s0) entered forwarding state
2166xenbr0: port 2(wlp4s0) entered disabled state
2167Access Point started
2168igb 0000:01:00.0: removed PHC on enp1s0
2169pciback 0000:01:00.0: seizing device
2170Already setup the GSI :28
2171Parsing config from opnsense.cfg
2172(XEN) HVM d1v0 save: CPU
2173(XEN) HVM d1v1 save: CPU
2174(XEN) HVM d1v2 save: CPU
2175(XEN) HVM d1v3 save: CPU
2176(XEN) HVM d1 save: PIC
2177(XEN) HVM d1 save: IOAPIC
2178(XEN) HVM d1v0 save: LAPIC
2179(XEN) HVM d1v1 save: LAPIC
2180(XEN) HVM d1v2 save: LAPIC
2181(XEN) HVM d1v3 save: LAPIC
2182(XEN) HVM d1v0 save: LAPIC_REGS
2183(XEN) HVM d1v1 save: LAPIC_REGS
2184(XEN) HVM d1v2 save: LAPIC_REGS
2185(XEN) HVM d1v3 save: LAPIC_REGS
2186(XEN) HVM d1 save: PCI_IRQ
2187(XEN) HVM d1 save: ISA_IRQ
2188(XEN) HVM d1 save: PCI_LINK
2189(XEN) HVM d1 save: PIT
2190(XEN) HVM d1 save: RTC
2191(XEN) HVM d1 save: HPET
2192(XEN) HVM d1 save: PMTIMER
2193(XEN) HVM d1v0 save: MTRR
2194(XEN) HVM d1v1 save: MTRR
2195(XEN) HVM d1v2 save: MTRR
2196(XEN) HVM d1v3 save: MTRR
2197(XEN) HVM d1 save: VIRIDIAN_DOMAIN
2198(XEN) HVM d1v0 save: CPU_XSAVE
2199(XEN) HVM d1v1 save: CPU_XSAVE
2200(XEN) HVM d1v2 save: CPU_XSAVE
2201(XEN) HVM d1v3 save: CPU_XSAVE
2202(XEN) HVM d1v0 save: VIRIDIAN_VCPU
2203(XEN) HVM d1v1 save: VIRIDIAN_VCPU
2204(XEN) HVM d1v2 save: VIRIDIAN_VCPU
2205(XEN) HVM d1v3 save: VIRIDIAN_VCPU
2206(XEN) HVM d1v0 save: VMCE_VCPU
2207(XEN) HVM d1v1 save: VMCE_VCPU
2208(XEN) HVM d1v2 save: VMCE_VCPU
2209(XEN) HVM d1v3 save: VMCE_VCPU
2210(XEN) HVM d1v0 save: TSC_ADJUST
2211(XEN) HVM d1v1 save: TSC_ADJUST
2212(XEN) HVM d1v2 save: TSC_ADJUST
2213(XEN) HVM d1v3 save: TSC_ADJUST
2214(XEN) HVM d1v0 save: CPU_MSR
2215(XEN) HVM d1v1 save: CPU_MSR
2216(XEN) HVM d1v2 save: CPU_MSR
2217(XEN) HVM d1v3 save: CPU_MSR
2218(XEN) HVM1 restore: CPU 0
2219tun: Universal TUN/TAP device driver, 1.6
2220xenbr0: port 3(vif1.0-emu) entered blocking state
2221xenbr0: port 3(vif1.0-emu) entered disabled state
2222device vif1.0-emu entered promiscuous mode
2223xenbr0: port 3(vif1.0-emu) entered blocking state
2224xenbr0: port 3(vif1.0-emu) entered forwarding state
2225xenbr0: port 4(vif1.0) entered blocking state
2226xenbr0: port 4(vif1.0) entered disabled state
2227device vif1.0 entered promiscuous mode
2228IPv6: ADDRCONF(NETDEV_UP): vif1.0: link is not ready
2229xenbr0: port 4(vif1.0) entered disabled state
2230IPv6: ADDRCONF(NETDEV_UP): vif1.0: link is not ready
2231xenbr0: port 3(vif1.0-emu) entered disabled state
2232xenbr0: port 3(vif1.0-emu) entered blocking state
2233xenbr0: port 3(vif1.0-emu) entered forwarding state
2234xen_pciback: vpci: 0000:01:00.0: assign to virtual slot 0
2235pciback 0000:01:00.0: registering for 1
2236(d1) HVM Loader
2237(d1) Detected Xen v4.13-unstable
2238(d1) Xenbus rings @0xfeffc000, event channel 1
2239(d1) System requested SeaBIOS
2240(d1) CPU speed is 998 MHz
2241(d1) Relocating guest memory for lowmem MMIO space disabled
2242root@pcengines-apu2:~# (XEN) irq.c:373: Dom1 PCI link 0 changed 0 -> 5
2243(d1) PCI-ISA link 0 routed to IRQ5
2244(XEN) irq.c:373: Dom1 PCI link 1 changed 0 -> 10
2245(d1) PCI-ISA link 1 routed to IRQ10
2246(XEN) irq.c:373: Dom1 PCI link 2 changed 0 -> 11
2247(d1) PCI-ISA link 2 routed to IRQ11
2248(XEN) irq.c:373: Dom1 PCI link 3 changed 0 -> 5
2249(d1) PCI-ISA link 3 routed to IRQ5
2250IPv6: ADDRCONF(NETDEV_CHANGE): wlp4s0: link becomes ready
2251xenbr0: port 2(wlp4s0) entered blocking state
2252xenbr0: port 2(wlp4s0) entered forwarding state
2253(d1) pci dev 01:3 INTA->IRQ10
2254(d1) pci dev 02:0 INTA->IRQ11
2255(d1) pci dev 03:0 INTA->IRQ5
2256(d1) pci dev 04:0 INTA->IRQ5
2257(d1) pci dev 05:0 INTA->IRQ10
2258(d1) RAM in high memory; setting high_mem resource base to 100000000
2259(d1) pci dev 02:0 bar 14 size 001000000: 0f0000008
2260(d1) pci dev 04:0 bar 30 size 000040000: 0f1000000
2261(d1) pci dev 05:0 bar 10 size 000020000: 0f1040000
2262(XEN) memory_map:add: dom1 gfn=f1040 mfn=f7900 nr=20
2263(XEN) memory_map:add: dom1 gfn=f7921 mfn=f7921 nr=3
2264(XEN) memory_map:remove: dom1 gfn=f7921 mfn=f7921 nr=3
2265(XEN) memory_map:add: dom1 gfn=f1061 mfn=f7921 nr=3
2266(d1) pci dev 05:0 bar 1c size 000004000: 0f1060000
2267(d1) pci dev 03:0 bar 18 size 000002000: 0f1064000
2268(d1) pci dev 03:0 bar 14 size 000000400: 0f1066000
2269(d1) pci dev 02:0 bar 10 size 000000100: 00000c001
2270(d1) pci dev 03:0 bar 10 size 000000100: 00000c101
2271(d1) pci dev 04:0 bar 10 size 000000100: 00000c201
2272(d1) pci dev 04:0 bar 14 size 000000100: 0f1066400
2273(d1) pci dev 05:0 bar 18 size 000000020: 00000c301
2274(XEN) ioport_map:add: dom1 gport=c300 mport=1000 nr=20
2275(d1) pci dev 01:1 bar 20 size 000000010: 00000c321
2276(d1) Multiprocessor initialisation:
2277(d1)  - CPU0 ... 40-bit phys ... fixed MTRRs ... var MTRRs [1/8] ... done.
2278(d1)  - CPU1 ... 40-bit phys ... fixed MTRRs ... var MTRRs [1/8] ... done.
2279(d1)  - CPU2 ... 40-bit phys ... fixed MTRRs ... var MTRRs [1/8] ... done.
2280(d1)  - CPU3 ... 40-bit phys ... fixed MTRRs ... var MTRRs [1/8] ... done.
2281(d1) Writing SMBIOS tables ...
2282(d1) Loading SeaBIOS ...
2283(d1) Creating MP tables ...
2284(d1) Loading ACPI ...
2285(d1) vm86 TSS at fc00aa00
2286(d1) BIOS map:
2287(d1)  10000-100e3: Scratch space
2288(d1)  c0000-fffff: Main BIOS
2289(d1) E820 table:
2290(d1)  [00]: 00000000:00000000 - 00000000:000a0000: RAM
2291(d1)  HOLE: 00000000:000a0000 - 00000000:000c0000
2292(d1)  [01]: 00000000:000c0000 - 00000000:00100000: RESERVED
2293(d1)  [02]: 00000000:00100000 - 00000000:40000000: RAM
2294(d1)  HOLE: 00000000:40000000 - 00000000:fc000000
2295(d1)  [03]: 00000000:fc000000 - 00000001:00000000: RESERVED
2296(d1)  [04]: 00000001:00000000 - 00000001:00000000: RAM
2297(d1) Invoking SeaBIOS ...
2298(d1) SeaBIOS (version ?-20200219_170411-76d80aba8a47)
2299(d1) BUILD: gcc: (GCC) 9.2.0 binutils: (GNU Binutils) 2.32.0.20190204
2300(d1) 
2301(d1) Found Xen hypervisor signature at 40000000
2302(d1) Running on QEMU (i440fx)
2303(d1) xen: copy e820...
2304(d1) Relocating init from 0x000d8e40 to 0x3ffad720 (size 75840)
2305(d1) Found 8 PCI devices (max PCI bus is 00)
2306(d1) Allocated Xen hypercall page at 3ffff000
2307(d1) Detected Xen v4.13-unstable
2308(d1) xen: copy BIOS tables...
2309(d1) Copying SMBIOS entry point from 0x00010020 to 0x000f5ea0
2310(d1) Copying MPTABLE from 0xfc0011e0/fc0011f0 to 0x000f5d80
2311(d1) Copying PIR from 0x00010040 to 0x000f5d00
2312(d1) Copying ACPI RSDP from 0x000100c0 to 0x000f5cd0
2313(d1) Using pmtimer, ioport 0xb008
2314(d1) Scan for VGA option rom
2315(d1) No VGA found, scan for other display
2316(d1) Turning on vga text mode console
2317(d1) SeaBIOS (version ?-20200219_170411-76d80aba8a47)
2318(d1) Machine UUID 678836b4-85ef-46de-867d-224421b0098c
2319(d1) ATA controller 1 at 1f0/3f4/0 (irq 14 dev 9)
2320(d1) ATA controller 2 at 170/374/0 (irq 15 dev 9)
2321(d1) found lsi53c895a at 00:03.0, io @ c100
2322(d1) Searching bootorder for: /pci@i0cf8/*@3/*@0/*@0,0
2323(d1) lsi 00:03.0 0:0 vendor='QEMU' product='QEMU HARDDISK' rev='2.5+' type=0 removable=0
2324(d1) lsi 00:03.0 0:0 blksize=512 sectors=1297144
2325(d1) Searching bootorder for: /pci@i0cf8/*@3/*@0/*@1,0
2326(d1) Searching bootorder for: /pci@i0cf8/*@3/*@0/*@1,1
2327(d1) Searching bootorder for: /pci@i0cf8/*@3/*@0/*@1,2
2328(d1) Searching bootorder for: /pci@i0cf8/*@3/*@0/*@1,3
2329(d1) Searching bootorder for: /pci@i0cf8/*@3/*@0/*@1,4
2330(d1) Searching bootorder for: /pci@i0cf8/*@3/*@0/*@1,5
2331(d1) Searching bootorder for: /pci@i0cf8/*@3/*@0/*@1,6
2332(d1) Searching bootorder for: /pci@i0cf8/*@3/*@0/*@1,7
2333(d1) Searching bootorder for: /pci@i0cf8/*@3/*@0/*@2,0
2334(d1) Searching bootorder for: /pci@i0cf8/*@3/*@0/*@2,1
2335(d1) Searching bootorder for: /pci@i0cf8/*@3/*@0/*@2,2
2336(d1) Searching bootorder for: /pci@i0cf8/*@3/*@0/*@2,3
2337(d1) Searching bootorder for: /pci@i0cf8/*@3/*@0/*@2,4
2338(d1) Searching bootorder for: /pci@i0cf8/*@3/*@0/*@2,5
2339(d1) Searching bootorder for: /pci@i0cf8/*@3/*@0/*@2,6
2340(d1) Searching bootorder for: /pci@i0cf8/*@3/*@0/*@2,7
2341(d1) Searching bootorder for: /pci@i0cf8/*@3/*@0/*@3,0
2342(d1) Searching bootorder for: /pci@i0cf8/*@3/*@0/*@3,1
2343(d1) Searching bootorder for: /pci@i0cf8/*@3/*@0/*@3,2
2344(d1) Searching bootorder for: /pci@i0cf8/*@3/*@0/*@3,3
2345(d1) Searching bootorder for: /pci@i0cf8/*@3/*@0/*@3,4
2346(d1) Searching bootorder for: /pci@i0cf8/*@3/*@0/*@3,5
2347(d1) Searching bootorder for: /pci@i0cf8/*@3/*@0/*@3,6
2348(d1) Searching bootorder for: /pci@i0cf8/*@3/*@0/*@3,7
2349(d1) Searching bootorder for: /pci@i0cf8/*@3/*@0/*@4,0
2350(d1) Searching bootorder for: /pci@i0cf8/*@3/*@0/*@4,1
2351(d1) Searching bootorder for: /pci@i0cf8/*@3/*@0/*@4,2
2352(d1) Searching bootorder for: /pci@i0cf8/*@3/*@0/*@4,3
2353(d1) Searching bootorder for: /pci@i0cf8/*@3/*@0/*@4,4
2354(d1) Searching bootorder for: /pci@i0cf8/*@3/*@0/*@4,5
2355(d1) Searching bootorder for: /pci@i0cf8/*@3/*@0/*@4,6
2356(d1) Searching bootorder for: /pci@i0cf8/*@3/*@0/*@4,7
2357(d1) Searching bootorder for: /pci@i0cf8/*@3/*@0/*@5,0
2358(d1) Searching bootorder for: /pci@i0cf8/*@3/*@0/*@5,1
2359(d1) Searching bootorder for: /pci@i0cf8/*@3/*@0/*@5,2
2360(d1) Searching bootorder for: /pci@i0cf8/*@3/*@0/*@5,3
2361(d1) Searching bootorder for: /pci@i0cf8/*@3/*@0/*@5,4
2362(d1) Searching bootorder for: /pci@i0cf8/*@3/*@0/*@5,5
2363(d1) Searching bootorder for: /pci@i0cf8/*@3/*@0/*@5,6
2364(d1) Searching bootorder for: /pci@i0cf8/*@3/*@0/*@5,7
2365(d1) Searching bootorder for: /pci@i0cf8/*@3/*@0/*@6,0
2366(d1) Searching bootorder for: /pci@i0cf8/*@3/*@0/*@6,1
2367(d1) Searching bootorder for: /pci@i0cf8/*@3/*@0/*@6,2
2368(d1) Searching bootorder for: /pci@i0cf8/*@3/*@0/*@6,3
2369(d1) Searching bootorder for: /pci@i0cf8/*@3/*@0/*@6,4
2370(d1) Searching bootorder for: /pci@i0cf8/*@3/*@0/*@6,5
2371(d1) Searching bootorder for: /pci@i0cf8/*@3/*@0/*@6,6
2372(d1) Searching bootorder for: /pci@i0cf8/*@3/*@0/*@6,7
2373(d1) Found 0 lpt ports
2374(d1) Found 1 serial ports
2375(d1) PS2 keyboard initialized
2376(d1) All threads complete.
2377(d1) Scan for option roms
2378(d1) Running option rom at c000:0003
2379(d1) pmm call arg1=1
2380(d1) pmm call arg1=0
2381(d1) pmm call arg1=1
2382(d1) pmm call arg1=0
2383(d1) Searching bootorder for: /pci@i0cf8/*@4
2384(d1) 
2385(d1) Press ESC for boot menu.
2386(d1) 
2387(d1) Searching bootorder for: HALT
2388(d1) drive 0x000f5c60: PCHS=0/0/0 translation=lba LCHS=643/32/63 s=1297144
2389(d1) Space available for UMB: c1000-ea800, f56c0-f5c60
2390(d1) Returned 258048 bytes of ZoneHigh
2391(d1) e820 map has 6 items:
2392(d1)   0: 0000000000000000 - 000000000009fc00 = 1 RAM
2393(d1)   1: 000000000009fc00 - 00000000000a0000 = 2 RESERVED
2394(d1)   2: 00000000000f0000 - 0000000000100000 = 2 RESERVED
2395(d1)   3: 0000000000100000 - 000000003ffff000 = 1 RAM
2396(d1)   4: 000000003ffff000 - 0000000040000000 = 2 RESERVED
2397(d1)   5: 00000000fc000000 - 0000000100000000 = 2 RESERVED
2398(d1) enter handle_19:
2399(d1)   NULL
2400(d1) Booting from Hard Disk...
2401(d1) Booting from 0000:7c00
2402(XEN) stdvga.c:173:d1v0 entering stdvga mode
2403(XEN) Dom1 callback via changed to Direct Vector 0x93
2404xenbr0: port 3(vif1.0-emu) entered disabled state
2405device vif1.0-emu left promiscuous mode
2406xenbr0: port 3(vif1.0-emu) entered disabled state
2407(XEN) irq.c:373: Dom1 PCI link 0 changed 5 -> 0
2408(XEN) irq.c:373: Dom1 PCI link 1 changed 10 -> 0
2409(XEN) irq.c:373: Dom1 PCI link 2 changed 11 -> 0
2410(XEN) irq.c:373: Dom1 PCI link 3 changed 5 -> 0
2411(XEN) memory_map:remove: dom1 gfn=f1040 mfn=f7900 nr=20
2412(XEN) memory_map:remove: dom1 gfn=f1061 mfn=f7921 nr=3
2413(XEN) memory_map:add: dom1 gfn=f1040 mfn=f7900 nr=20
2414(XEN) memory_map:add: dom1 gfn=f1061 mfn=f7921 nr=3
2415(XEN) memory_map:remove: dom1 gfn=f1040 mfn=f7900 nr=20
2416(XEN) memory_map:remove: dom1 gfn=f1061 mfn=f7921 nr=3
2417(XEN) memory_map:add: dom1 gfn=f1040 mfn=f7900 nr=20
2418(XEN) memory_map:add: dom1 gfn=f1061 mfn=f7921 nr=3
2419(XEN) ioport_map:remove: dom1 gport=c300 mport=1000 nr=20
2420(XEN) ioport_map:add: dom1 gport=c300 mport=1000 nr=20
2421(XEN) memory_map:remove: dom1 gfn=f1040 mfn=f7900 nr=20
2422(XEN) memory_map:remove: dom1 gfn=f1061 mfn=f7921 nr=3
2423(XEN) memory_map:add: dom1 gfn=f1040 mfn=f7900 nr=20
2424(XEN) memory_map:add: dom1 gfn=f1061 mfn=f7921 nr=3
2425(XEN) memory_map:remove: dom1 gfn=f1040 mfn=f7900 nr=20
2426(XEN) memory_map:remove: dom1 gfn=f1061 mfn=f7921 nr=3
2427(XEN) memory_map:add: dom1 gfn=f1040 mfn=f7900 nr=20
2428(XEN) memory_map:add: dom1 gfn=f1061 mfn=f7921 nr=3
2429(XEN) memory_map:remove: dom1 gfn=f1040 mfn=f7900 nr=20
2430(XEN) memory_map:remove: dom1 gfn=f1061 mfn=f7921 nr=3
2431(XEN) memory_map:add: dom1 gfn=f1040 mfn=f7900 nr=20
2432(XEN) memory_map:add: dom1 gfn=f1061 mfn=f7921 nr=3
2433xen-blkback: backend/vbd/1/2048: using 1 queues, protocol 1 (x86_64-abi) 
2434(XEN) grant_table.c:1784:d1v2 Expanding d1 grant table from 1 to 2 frames
2435(XEN) grant_table.c:1784:d1v2 Expanding d1 grant table from 2 to 3 frames
2436(XEN) grant_table.c:1784:d1v2 Expanding d1 grant table from 3 to 4 frames
2437(XEN) grant_table.c:1784:d1v2 Expanding d1 grant table from 4 to 5 frames
2438(XEN) grant_table.c:1784:d1v2 Expanding d1 grant table from 5 to 6 frames
2439vif vif-1-0 vif1.0: Guest Rx ready
2440IPv6: ADDRCONF(NETDEV_CHANGE): vif1.0: link becomes ready
2441xenbr0: port 4(vif1.0) entered blocking state
2442xenbr0: port 4(vif1.0) entered forwarding state
2443(XEN) AMD-Vi: IO_PAGE_FAULT: domain = 0, device id = 0x400, fault address = 0xfdf8000840, flags = 0x8
2444(XEN) AMD-Vi: IO_PAGE_FAULT: domain = 0, device id = 0x400, fault address = 0xfdf8000840, flags = 0x8
2445(XEN) AMD-Vi: IO_PAGE_FAULT: domain = 0, device id = 0x400, fault address = 0xfdf8000840, flags = 0x8
2446ath10k_pci 0000:04:00.0: firmware crashed! (guid e1bc2af7-9fad-4455-880e-a9a6cec956ef)
2447ath10k_pci 0000:04:00.0: qca988x hw2.0 target 0x4100016c chip_id 0x043202ff sub 0000:0000
2448ath10k_pci 0000:04:00.0: kconfig debug 0 debugfs 0 tracing 0 dfs 1 testmode 0
2449ath10k_pci 0000:04:00.0: firmware ver 10.2.4-1.0-00045 api 5 features no-p2p,raw-mode,mfp,allows-mesh-bcast crc32 ccbd5104
2450ath10k_pci 0000:04:00.0: board_file api 1 bmi_id N/A crc32 bebc7c08
2451ath10k_pci 0000:04:00.0: htt-ver 2.1 wmi-op 5 htt-op 2 cal otp max-sta 128 raw 0 hwcrypto 1
2452ath10k_pci 0000:04:00.0: failed to get memcpy hi address for firmware address 4: -16
2453ath10k_pci 0000:04:00.0: failed to read firmware dump area: -16
2454ath10k_pci 0000:04:00.0: Copy Engine register dump:
2455ath10k_pci 0000:04:00.0: [00]: 0x00057400  10  10   3   3
2456ath10k_pci 0000:04:00.0: [01]: 0x00057800   2   2 101 102
2457ath10k_pci 0000:04:00.0: [02]: 0x00057c00   7   7   6   7
2458ath10k_pci 0000:04:00.0: [03]: 0x00058000   0  31   1  31
2459ath10k_pci 0000:04:00.0: [04]: 0x00058400  10  10  50  10
2460ath10k_pci 0000:04:00.0: [05]: 0x00058800  19  19  82  83
2461ath10k_pci 0000:04:00.0: [06]: 0x00058c00  31  31  31  31
2462ath10k_pci 0000:04:00.0: [07]: 0x00059000   1   0   1   0
2463ieee80211 phy0: Hardware restart was requested
2464ath10k_pci 0000:04:00.0: failed to poke copy engine: -16
2465ath10k_pci 0000:04:00.0: failed to poke copy engine: -16
2466ath10k_pci 0000:04:00.0: failed to poke copy engine: -16
2467ath10k_pci 0000:04:00.0: failed to read device register, device is gone
2468ath10k_pci 0000:04:00.0: failed to wait for target after cold reset: -5
2469ath10k_pci 0000:04:00.0: firmware crashed during chip reset
2470ath10k_pci 0000:04:00.0: firmware crashed! (guid e69b3662-3967-483f-a8ee-3812510801c7)
2471ath10k_pci 0000:04:00.0: qca988x hw2.0 target 0x4100016c chip_id 0x043202ff sub 0000:0000
2472ath10k_pci 0000:04:00.0: k
2473
2474coreboot-v4.11.0.3-57-gba91eca881-v4.10.0.2 Mon Feb 24 09:08:34 UTC 2020 bootblock starting (log level: 7)...
2475FMAP: area COREBOOT found @ 194000 (6733824 bytes)
2476CBFS: Locating 'fallback/romstage'
2477CBFS: Found @ offset 80 size d764
2478BS: bootblock times (exec / console): total (unknown) / 10 ms