· 6 years ago · Mar 17, 2020, 12:56 PM
1modprobe hid-multitouch
2root@dolphin-fvd-p1:/ # dmesg
3<6>[ 0.000000] Booting Linux on physical CPU 0
4<6>[ 0.000000] Initializing cgroup subsys cpu
5<5>[ 0.000000] Linux version 3.4.113 (root@h3droid-i3) (gcc version 4.6.3 20120201 (prerelease) (crosstool-NG linaro-1.13.1-2012.02-20120222 - Linaro GCC 2012.02) ) #314 SMP Wed May 29 21:57:18 CEST 2019
6<7>[ 0.000000] CPU: ARMv7 Processor [410fc075] revision 5 (ARMv7), cr=10c5387d
7<7>[ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
8<7>[ 0.000000] Machine: sun8i
9<6>[ 0.000000] cma: dma_contiguous_reserve: ion_mem.size:12c00000, ion_mem.start:4d400000, selected_size:06000000, limit:6f800000, size_cmdline:ffffffff
10<6>[ 0.000000] cma: dma_contiguous_reserve: reserving 96 MiB for global area
11<6>[ 0.000000] cma: CMA: reserved 300 MiB at 0x4d400000
12<7>[ 0.000000] Memory policy: ECC disabled, Data cache writealloc
13<7>[ 0.000000] On node 0 totalpages: 262144
14<7>[ 0.000000] free_area_init_node: node 0, pgdat c094ce80, node_mem_map c0adb000
15<7>[ 0.000000] Normal zone: 1520 pages used for memmap
16<7>[ 0.000000] Normal zone: 0 pages reserved
17<7>[ 0.000000] Normal zone: 193040 pages, LIFO batch:31
18<7>[ 0.000000] HighMem zone: 528 pages used for memmap
19<7>[ 0.000000] HighMem zone: 67056 pages, LIFO batch:15
20<7>[ 0.000000] script_init enter!
21<7>[ 0.000000] script_init exit!
22<6>[ 0.000000] PERCPU: Embedded 8 pages/cpu @c12f0000 s11520 r8192 d13056 u32768
23<7>[ 0.000000] pcpu-alloc: s11520 r8192 d13056 u32768 alloc=8*4096
24<7>[ 0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3
25<7>[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 260096
26<5>[ 0.000000] Kernel command line: root=/dev/ram rw console=ttyS0,115200 init=/init rootwait quiet initcall_debug=0 ramdisk_size=4096 partitions=system@mmcblk0p2:UDISK@mmcblk0p3 boot_type=1 config_size=49152 mac_addr= wifi_mac= bt_mac= specialstr= serialno=
27<6>[ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
28<6>[ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
29<6>[ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
30<6>[ 0.000000] Memory: 1024MB = 1024MB total
31<5>[ 0.000000] Memory: 718916k/718916k available, 329660k reserved, 270336K highmem
32<5>[ 0.000000] Virtual kernel memory layout:
33<5>[ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB)
34<5>[ 0.000000] fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB)
35<5>[ 0.000000] vmalloc : 0xf0000000 - 0xff000000 ( 240 MB)
36<5>[ 0.000000] lowmem : 0xc0000000 - 0xef800000 ( 760 MB)
37<5>[ 0.000000] pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB)
38<5>[ 0.000000] modules : 0xbf000000 - 0xbfe00000 ( 14 MB)
39<5>[ 0.000000] .text : 0xc0008000 - 0xc0893eac (8752 kB)
40<5>[ 0.000000] .init : 0xc0894000 - 0xc08d5d00 ( 264 kB)
41<5>[ 0.000000] .data : 0xc08d6000 - 0xc094f7d8 ( 486 kB)
42<5>[ 0.000000] .bss : 0xc094ff0c - 0xc0ada62c (1578 kB)
43<6>[ 0.000000] SLUB: Genslabs=11, HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
44<6>[ 0.000000] Hierarchical RCU implementation.
45<6>[ 0.000000] NR_IRQS:544
46<6>[ 0.000000] Architected local timer running at 24.00MHz.
47<6>[ 0.000000] Switching to timer-based delay loop
48<6>[ 0.000000] sched_clock: 32 bits at 24MHz, resolution 41ns, wraps every 178956ms
49<6>[ 0.000000] Console: colour dummy device 80x30
50<6>[ 0.000106] Calibrating delay loop (skipped), value calculated using timer frequency.. 4800.00 BogoMIPS (lpj=24000000)
51<6>[ 0.000125] pid_max: default: 32768 minimum: 301
52<6>[ 0.000351] Mount-cache hash table entries: 512
53<6>[ 0.001210] Initializing cgroup subsys debug
54<6>[ 0.001225] Initializing cgroup subsys cpuacct
55<6>[ 0.001233] Initializing cgroup subsys freezer
56<6>[ 0.001264] CPU: Testing write buffer coherency: ok
57<6>[ 0.001486] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
58<6>[ 0.001496] [sunxi_smp_prepare_cpus] enter
59<6>[ 0.001525] Setting up static identity map for 0x40649e30 - 0x40649e88
60<7>[ 0.005419] CPU1: Booted secondary processor
61<6>[ 0.005479] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001
62<7>[ 0.009011] CPU2: Booted secondary processor
63<6>[ 0.009067] CPU2: thread -1, cpu 2, socket 0, mpidr 80000002
64<7>[ 0.010000] CPU3: Booted secondary processor
65<6>[ 0.010000] CPU3: thread -1, cpu 3, socket 0, mpidr 80000003
66<6>[ 0.010161] Brought up 4 CPUs
67<6>[ 0.010178] SMP: Total of 4 processors activated (19200.00 BogoMIPS).
68<6>[ 0.010426] devtmpfs: initialized
69<6>[ 0.013122] wakeup src cnt is : 2.
70<7>[ 0.013122] [exstandby]leave extended_standby_enable_wakeup_src : event 0x800000
71<7>[ 0.013122] [exstandby]leave extended_standby_enable_wakeup_src : wakeup_gpio_map 0x0
72<7>[ 0.013122] [exstandby]leave extended_standby_enable_wakeup_src : wakeup_gpio_group 0x40
73<7>[ 0.013122] [exstandby]leave extended_standby_enable_wakeup_src : event 0x800000
74<7>[ 0.013122] [exstandby]leave extended_standby_enable_wakeup_src : wakeup_gpio_map 0x8
75<7>[ 0.013122] [exstandby]leave extended_standby_enable_wakeup_src : wakeup_gpio_group 0x40
76<6>[ 0.013122] sunxi pm init
77<6>[ 0.013122] pinctrl core: initialized pinctrl subsystem
78<6>[ 0.013122] cma: cma_init_reserved_areas: size:314572800 minor_size:100663296
79<6>[ 0.016390] cma: cma_init_reserved_areas: 1: ok
80<6>[ 0.016695] NET: Registered protocol family 16
81<6>[ 0.017053] atomic_pool_init: bitmap_size=64 pool->size=2097152 nr_pages=512 (pages size)=2048
82<6>[ 0.017067] atomic_pool_init: __alloc_from_contiguous(2097152)
83<6>[ 0.021381] DMA: preallocated 2048 KiB pool for atomic coherent allocations
84<6>[ 0.021447] script_sysfs_init success
85<7>[ 0.021475] sunxi_dump_init success
86<6>[ 0.022207] gpiochip_add: registered GPIOs 0 to 383 on device: sunxi-pinctrl
87<6>[ 0.023151] sunxi-pinctrl sunxi-pinctrl: initialized sunXi PIO driver
88<7>[ 0.023877] plat: add ds1307 device
89<6>[ 0.023925] hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers.
90<6>[ 0.023938] hw-breakpoint: maximum watchpoint size is 8 bytes.
91<7>[ 0.024176] [sunxi-module]: [sunxi-module.0] probe success
92<6>[ 0.024212] script config pll_video to 297 Mhz
93<6>[ 0.024225] script config pll_de to 864 Mhz
94<6>[ 0.024252] script config pll_ve to 402 Mhz
95<7>[ 0.024265] sunxi_default_clk_init
96<7>[ 0.024272] try to set pll6ahb1 to 200000000
97<7>[ 0.024288] try to set ahb clk source to pll6ahb1
98<7>[ 0.024295] set ahb clk source to pll6ahb1
99<7>[ 0.024304] try to set ahb1 to 200000000
100<7>[ 0.024314] try to set apb1 to 100000000
101<6>[ 0.032232] bio: create slab <bio-0> at 0
102<5>[ 0.032232] [ARISC] :sunxi-arisc driver v1.04
103<5>[ 0.047185] [ARISC] :arisc version: [v0.1.58.3]
104<5>[ 0.136150] [ARISC] :sunxi-arisc driver v1.04 startup succeeded
105<5>[ 0.140299] SCSI subsystem initialized
106<6>[ 0.140481] usbcore: registered new interface driver usbfs
107<6>[ 0.140545] usbcore: registered new interface driver hub
108<6>[ 0.140569] usbcore: registered new device driver usb
109<4>[ 0.140569] twi_chan_cfg()340 - [twi0] has no twi_regulator.
110<4>[ 0.140569] twi_chan_cfg()340 - [twi1] has no twi_regulator.
111<4>[ 0.140569] twi_chan_cfg()340 - [twi2] has no twi_regulator.
112<6>[ 0.140794] Linux video capture interface: v2.00
113<6>[ 0.141000] Advanced Linux Sound Architecture Driver Version 1.0.25.
114<6>[ 0.141518] Switching to clocksource arch_sys_counter
115<5>[ 0.150458] FS-Cache: Loaded
116<6>[ 0.150699] CacheFiles: Loaded
117<6>[ 0.160495] NET: Registered protocol family 2
118<6>[ 0.170284] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
119<6>[ 0.170746] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
120<6>[ 0.172592] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
121<6>[ 0.173452] TCP: Hash tables configured (established 131072 bind 65536)
122<6>[ 0.173462] TCP: reno registered
123<6>[ 0.173473] UDP hash table entries: 512 (order: 2, 16384 bytes)
124<6>[ 0.173532] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
125<6>[ 0.173839] NET: Registered protocol family 1
126<6>[ 0.174118] RPC: Registered named UNIX socket transport module.
127<6>[ 0.174130] RPC: Registered udp transport module.
128<6>[ 0.174137] RPC: Registered tcp transport module.
129<6>[ 0.174145] RPC: Registered tcp NFSv4.1 backchannel transport module.
130<6>[ 0.174317] Trying to unpack rootfs image as initramfs...
131<6>[ 0.903476] Freeing initrd memory: 1364K
132<6>[ 0.903890] hw perfevents: enabled with ARMv7 Cortex_A7 PMU driver, 5 counters available
133<6>[ 0.904007] sunxi_reg_init enter
134<6>[ 0.904777] audit: initializing netlink socket (disabled)
135<5>[ 0.904842] type=2000 audit(0.900:1): initialized
136<7>[ 0.905872] highmem bounce pool size: 64 pages
137<6>[ 0.913317] squashfs: version 4.0 (2009/01/31) Phillip Lougher
138<5>[ 0.913677] NFS: Registering the id_resolver key type
139<6>[ 0.914611] NTFS driver 2.1.30 [Flags: R/W].
140<6>[ 0.914887] fuse init (API version 7.18)
141<6>[ 0.915452] msgmni has been set to 1478
142<6>[ 0.917399] NET: Registered protocol family 38
143<6>[ 0.917434] io scheduler noop registered (default)
144<6>[ 0.917443] io scheduler deadline registered
145<6>[ 0.917479] io scheduler cfq registered
146<6>[ 0.917824] [DISP]disp_module_init
147<6>[ 0.918107] cmdline,init_disp=
148<6>[ 0.918134] cmdline,disp_para=
149<4>[ 0.933548] [DISP] Fb_map_kernel_logo,line:1052:Fb_map_kernel_logo failed!fb_draw_colorbar: 1920x2160 (fb_var_screeninfo: 1920x1080)
150<7>[ 1.187730] fb_draw_colorbar: finished.
151<6>[ 1.189356] [DISP]disp_module_init finish
152<4>[ 1.189600] sw_uart_get_devinfo()1503 - uart0 has no uart_regulator.
153<6>[ 1.189906] uart0: ttyS0 at MMIO 0x1c28000 (irq = 32) is a SUNXI
154<4>[ 1.189919] sw_uart_pm()890 - uart0 clk is already enable
155<4>[ 1.189935] sw_console_setup()1233 - console setup baud 115200 parity n bits 8, flow n
156<6>[ 1.190096] console [ttyS0] enabled
157<7>[ 1.190590] sunxi_cmatest_init enter
158<7>[ 1.190642] sunxi_cmatest_init success
159<6>[ 1.190810] sunxi_di_init get di_by_pass err!
160<6>[ 1.197949] brd: module loaded
161<6>[ 1.201739] loop: module loaded
162<4>[ 1.201945] sunxi_spi_chan_cfg()1376 - [spi-0] has no spi_regulator.
163<4>[ 1.201957] sunxi_spi_chan_cfg()1376 - [spi-1] has no spi_regulator.
164<6>[ 1.202462] spi spi0: master is unqueued, this is deprecated
165<6>[ 1.202788] tun: Universal TUN/TAP device driver, 1.6
166<6>[ 1.202799] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
167<6>[ 1.203568] PPP generic driver version 2.4.2
168<6>[ 1.203735] PPP BSD Compression module registered
169<6>[ 1.203743] PPP Deflate Compression module registered
170<6>[ 1.204471] PPP MPPE Compression module registered
171<6>[ 1.204484] NET: Registered protocol family 24
172<6>[ 1.204518] PPTP driver version 0.8.5
173<6>[ 1.204747] SLIP: version 0.8.4-NET3.019-NEWTTY (dynamic channels, max=256).
174<6>[ 1.204756] CSLIP: code copyright 1989 Regents of the University of California.
175<6>[ 1.204764] SLIP linefill/keepalive option.
176<6>[ 1.204862] usbcore: registered new interface driver cdc_ether
177<6>[ 1.205512] aoe: AoE v47q initialised.
178<6>[ 1.205543] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
179<6>[ 1.225618] sunxi-ehci sunxi-ehci.1: SW USB2.0 'Enhanced' Host Controller (EHCI) Driver
180<6>[ 1.225647] sunxi-ehci sunxi-ehci.1: new USB bus registered, assigned bus number 1
181<6>[ 1.226165] sunxi-ehci sunxi-ehci.1: irq 104, io mem 0xf1c1a000
182<6>[ 1.240032] sunxi-ehci sunxi-ehci.1: USB 0.0 started, EHCI 1.00
183<6>[ 1.240126] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
184<6>[ 1.240138] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
185<6>[ 1.240149] usb usb1: Product: SW USB2.0 'Enhanced' Host Controller (EHCI) Driver
186<6>[ 1.240159] usb usb1: Manufacturer: Linux 3.4.113 ehci_hcd
187<6>[ 1.240168] usb usb1: SerialNumber: sunxi-ehci
188<6>[ 1.240663] hub 1-0:1.0: USB hub found
189<6>[ 1.240684] hub 1-0:1.0: 1 port detected
190<6>[ 1.261047] sunxi-ehci sunxi-ehci.2: SW USB2.0 'Enhanced' Host Controller (EHCI) Driver
191<6>[ 1.261075] sunxi-ehci sunxi-ehci.2: new USB bus registered, assigned bus number 2
192<6>[ 1.261473] sunxi-ehci sunxi-ehci.2: irq 106, io mem 0xf1c1b000
193<6>[ 1.280032] sunxi-ehci sunxi-ehci.2: USB 0.0 started, EHCI 1.00
194<7>[ 1.280045] ehci_irq: highspeed device connect
195<6>[ 1.280118] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
196<6>[ 1.280132] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
197<6>[ 1.280144] usb usb2: Product: SW USB2.0 'Enhanced' Host Controller (EHCI) Driver
198<6>[ 1.280155] usb usb2: Manufacturer: Linux 3.4.113 ehci_hcd
199<6>[ 1.280164] usb usb2: SerialNumber: sunxi-ehci
200<6>[ 1.280603] hub 2-0:1.0: USB hub found
201<6>[ 1.280621] hub 2-0:1.0: 1 port detected
202<6>[ 1.300945] sunxi-ehci sunxi-ehci.3: SW USB2.0 'Enhanced' Host Controller (EHCI) Driver
203<6>[ 1.300971] sunxi-ehci sunxi-ehci.3: new USB bus registered, assigned bus number 3
204<6>[ 1.301344] sunxi-ehci sunxi-ehci.3: irq 108, io mem 0xf1c1c000
205<6>[ 1.320036] sunxi-ehci sunxi-ehci.3: USB 0.0 started, EHCI 1.00
206<6>[ 1.320095] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002
207<6>[ 1.320107] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
208<6>[ 1.320118] usb usb3: Product: SW USB2.0 'Enhanced' Host Controller (EHCI) Driver
209<6>[ 1.320128] usb usb3: Manufacturer: Linux 3.4.113 ehci_hcd
210<6>[ 1.320136] usb usb3: SerialNumber: sunxi-ehci
211<6>[ 1.320569] hub 3-0:1.0: USB hub found
212<6>[ 1.320586] hub 3-0:1.0: 1 port detected
213<6>[ 1.340917] sunxi-ehci sunxi-ehci.4: SW USB2.0 'Enhanced' Host Controller (EHCI) Driver
214<6>[ 1.340949] sunxi-ehci sunxi-ehci.4: new USB bus registered, assigned bus number 4
215<6>[ 1.341314] sunxi-ehci sunxi-ehci.4: irq 110, io mem 0xf1c1d000
216<6>[ 1.360036] sunxi-ehci sunxi-ehci.4: USB 0.0 started, EHCI 1.00
217<6>[ 1.360096] usb usb4: New USB device found, idVendor=1d6b, idProduct=0002
218<6>[ 1.360108] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
219<6>[ 1.360119] usb usb4: Product: SW USB2.0 'Enhanced' Host Controller (EHCI) Driver
220<6>[ 1.360129] usb usb4: Manufacturer: Linux 3.4.113 ehci_hcd
221<6>[ 1.360137] usb usb4: SerialNumber: sunxi-ehci
222<6>[ 1.360581] hub 4-0:1.0: USB hub found
223<6>[ 1.360597] hub 4-0:1.0: 1 port detected
224<6>[ 1.360939] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
225<6>[ 1.380993] sunxi-ohci sunxi-ohci.1: SW USB2.0 'Open' Host Controller (OHCI) Driver
226<6>[ 1.381018] sunxi-ohci sunxi-ohci.1: new USB bus registered, assigned bus number 5
227<6>[ 1.381048] sunxi-ohci sunxi-ohci.1: irq 105, io mem 0xf1c1a400
228<6>[ 1.444075] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
229<6>[ 1.444088] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
230<6>[ 1.444098] usb usb5: Product: SW USB2.0 'Open' Host Controller (OHCI) Driver
231<6>[ 1.444108] usb usb5: Manufacturer: Linux 3.4.113 ohci_hcd
232<6>[ 1.444117] usb usb5: SerialNumber: sunxi-ohci
233<6>[ 1.444553] hub 5-0:1.0: USB hub found
234<6>[ 1.444570] hub 5-0:1.0: 1 port detected
235<6>[ 1.464905] sunxi-ohci sunxi-ohci.2: SW USB2.0 'Open' Host Controller (OHCI) Driver
236<6>[ 1.464932] sunxi-ohci sunxi-ohci.2: new USB bus registered, assigned bus number 6
237<6>[ 1.464962] sunxi-ohci sunxi-ohci.2: irq 107, io mem 0xf1c1b400
238<6>[ 1.524073] usb usb6: New USB device found, idVendor=1d6b, idProduct=0001
239<6>[ 1.524086] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
240<6>[ 1.524096] usb usb6: Product: SW USB2.0 'Open' Host Controller (OHCI) Driver
241<6>[ 1.524106] usb usb6: Manufacturer: Linux 3.4.113 ohci_hcd
242<6>[ 1.524115] usb usb6: SerialNumber: sunxi-ohci
243<6>[ 1.524531] hub 6-0:1.0: USB hub found
244<6>[ 1.524548] hub 6-0:1.0: 1 port detected
245<6>[ 1.544849] sunxi-ohci sunxi-ohci.3: SW USB2.0 'Open' Host Controller (OHCI) Driver
246<6>[ 1.544874] sunxi-ohci sunxi-ohci.3: new USB bus registered, assigned bus number 7
247<6>[ 1.544903] sunxi-ohci sunxi-ohci.3: irq 109, io mem 0xf1c1c400
248<6>[ 1.600039] usb 2-1: new high-speed USB device number 2 using sunxi-ehci
249<6>[ 1.604077] usb usb7: New USB device found, idVendor=1d6b, idProduct=0001
250<6>[ 1.604089] usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1
251<6>[ 1.604100] usb usb7: Product: SW USB2.0 'Open' Host Controller (OHCI) Driver
252<6>[ 1.604109] usb usb7: Manufacturer: Linux 3.4.113 ohci_hcd
253<6>[ 1.604118] usb usb7: SerialNumber: sunxi-ohci
254<6>[ 1.604523] hub 7-0:1.0: USB hub found
255<6>[ 1.604540] hub 7-0:1.0: 1 port detected
256<6>[ 1.624837] sunxi-ohci sunxi-ohci.4: SW USB2.0 'Open' Host Controller (OHCI) Driver
257<6>[ 1.624863] sunxi-ohci sunxi-ohci.4: new USB bus registered, assigned bus number 8
258<6>[ 1.624898] sunxi-ohci sunxi-ohci.4: irq 111, io mem 0xf1c1d400
259<6>[ 1.684072] usb usb8: New USB device found, idVendor=1d6b, idProduct=0001
260<6>[ 1.684084] usb usb8: New USB device strings: Mfr=3, Product=2, SerialNumber=1
261<6>[ 1.684095] usb usb8: Product: SW USB2.0 'Open' Host Controller (OHCI) Driver
262<6>[ 1.684105] usb usb8: Manufacturer: Linux 3.4.113 ohci_hcd
263<6>[ 1.684113] usb usb8: SerialNumber: sunxi-ohci
264<6>[ 1.684507] hub 8-0:1.0: USB hub found
265<6>[ 1.684523] hub 8-0:1.0: 1 port detected
266<6>[ 1.684963] usbcore: registered new interface driver cdc_acm
267<6>[ 1.684973] cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters
268<6>[ 1.684982] Initializing USB Mass Storage driver...
269<6>[ 1.685125] usbcore: registered new interface driver usb-storage
270<6>[ 1.685135] USB Mass Storage support registered.
271<6>[ 1.685176] usbcore: registered new interface driver ums-alauda
272<6>[ 1.685220] usbcore: registered new interface driver ums-cypress
273<6>[ 1.685273] usbcore: registered new interface driver ums-datafab
274<6>[ 1.685317] usbcore: registered new interface driver ums_eneub6250
275<6>[ 1.685358] usbcore: registered new interface driver ums-freecom
276<6>[ 1.685401] usbcore: registered new interface driver ums-isd200
277<6>[ 1.685442] usbcore: registered new interface driver ums-jumpshot
278<6>[ 1.685485] usbcore: registered new interface driver ums-karma
279<6>[ 1.685526] usbcore: registered new interface driver ums-onetouch
280<6>[ 1.685579] usbcore: registered new interface driver ums-realtek
281<6>[ 1.685626] usbcore: registered new interface driver ums-sddr09
282<6>[ 1.685669] usbcore: registered new interface driver ums-sddr55
283<6>[ 1.685720] usbcore: registered new interface driver ums-usbat
284<6>[ 1.685825] usbcore: registered new interface driver usbserial
285<6>[ 1.685876] usbcore: registered new interface driver usbserial_generic
286<6>[ 1.685915] USB Serial support registered for generic
287<6>[ 1.750642] usb 2-1: New USB device found, idVendor=1a40, idProduct=0201
288<6>[ 1.750656] usb 2-1: New USB device strings: Mfr=0, Product=1, SerialNumber=0
289<6>[ 1.750666] usb 2-1: Product: USB 2.0 Hub [MTT]
290<6>[ 1.751141] hub 2-1:1.0: USB hub found
291<6>[ 1.751263] hub 2-1:1.0: 7 ports detected
292<6>[ 1.752872] usbserial: USB Serial Driver core
293<6>[ 1.752938] usbcore: registered new interface driver ch341
294<6>[ 1.752977] USB Serial support registered for ch341-uart
295<6>[ 1.753039] usbcore: registered new interface driver cp210x
296<6>[ 1.753076] USB Serial support registered for cp210x
297<6>[ 1.753173] usbcore: registered new interface driver option
298<6>[ 1.753210] USB Serial support registered for GSM modem (1-port)
299<6>[ 1.753580] usbcore: registered new interface driver pl2303
300<6>[ 1.753616] USB Serial support registered for pl2303
301<6>[ 1.753932] file system registered
302<6>[ 1.755508] android_usb gadget: Mass Storage Function, version: 2009/09/11
303<6>[ 1.755522] android_usb gadget: Number of LUNs=3
304<6>[ 1.755532] lun0: LUN: removable file: (no medium)
305<6>[ 1.755541] lun1: LUN: removable file: (no medium)
306<6>[ 1.755550] lun2: LUN: removable file: (no medium)
307<6>[ 1.755917] android_usb gadget: android_usb ready
308<7>[ 1.756039] uinput result 0 , vmouse_init
309<6>[ 1.756550] mousedev: PS/2 mouse device common for all mice
310<3>[ 1.757551] ls_fetch_sysconfig_para: type err device_used = 0.
311<5>[ 1.764241] =========script_get_err============
312<7>[ 1.764251] ltr_init: ls_fetch_sysconfig_para err.
313<6>[ 1.764384] i2c /dev entries driver
314<6>[ 1.764721] IR RC5(x) protocol handler initialized
315<7>[ 1.764856] sunxi tsc version 0.1
316<3>[ 1.764906] tscdev_init: tsc driver is disabled
317<7>[ 1.770046] sunxi cedar version 0.1
318<7>[ 1.770082] [cedar]: install start!!!
319<7>[ 1.770267] [cedar]: install end!!!
320<6>[ 1.780460] sunxi_wdt_init_module: sunxi WatchDog Timer Driver v1.0
321<6>[ 1.780620] sunxi_wdt_probe: devm_ioremap return wdt_reg 0xf1c20ca0, res->start 0x01c20ca0, res->end 0x01c20cbf
322<6>[ 1.780746] sunxi_wdt_probe: initialized (g_timeout=16s, g_nowayout=0)
323<6>[ 1.780757] wdt_enable, write reg 0xf1c20cb8 val 0x00000000
324<6>[ 1.780767] timeout_to_interv, line 167
325<6>[ 1.780774] interv_to_timeout, line 189
326<6>[ 1.780783] wdt_set_tmout, write 0x000000b0 to mode reg 0xf1c20cb8, actual timeout 16 sec
327<6>[ 1.781412] device-mapper: ioctl: 4.22.0-ioctl (2011-10-19) initialised: dm-devel@redhat.com
328<7>[ 1.781610] calibrat: max_cpufreq 1200Mhz Type 0!
329<6>[ 1.781857] cpuidle: using governor ladder
330<6>[ 1.781866] cpuidle: using governor menu
331<7>[ 1.781941] [mmc]: SD/MMC/SDIO Host Controller Driver(v1.121 2016-08-3 16:46) Compiled in May 5 2019 at 09:39:02
332<7>[ 1.781973] [mmc]: get mmc0's sdc_power is null!
333<7>[ 1.781997] [mmc]: get mmc1's sdc_power is null!
334<7>[ 1.782005] [mmc]: get mmc1's 2xmode ok, val = 1
335<7>[ 1.782013] [mmc]: get mmc1's ddrmode ok, val = 1
336<7>[ 1.782028] [mmc]: MMC host used card: 0x3, boot card: 0x0, io_card 2
337<7>[ 1.785453] [mmc]: sdc0 power_supply is null
338<7>[ 1.787441] Registered led device: red_led
339<7>[ 1.787546] Registered led device: green_led
340<6>[ 1.788905] usbcore: registered new interface driver usbhid
341<6>[ 1.788914] usbhid: USB HID core driver
342<6>[ 1.788924] zram: num_devices not specified. Using default: 1
343<6>[ 1.788931] zram: Creating 1 devices ...
344<6>[ 1.790134] ashmem: initialized
345<6>[ 1.790257] logger: created 256K log 'log_main'
346<6>[ 1.790369] logger: created 256K log 'log_events'
347<6>[ 1.790474] logger: created 256K log 'log_radio'
348<6>[ 1.790578] logger: created 256K log 'log_system'
349<6>[ 1.794144] asoc: sndcodec <-> sunxi-codec mapping ok
350<6>[ 1.797584] asoc: sndhdmi <-> sunxi-hdmiaudio.0 mapping ok
351<6>[ 1.798395] GACT probability on
352<7>[ 1.798405] Failed to load ipt action
353<6>[ 1.798418] u32 classifier
354<6>[ 1.798423] input device check on
355<6>[ 1.798428] Actions configured
356<6>[ 1.798439] Netfilter messages via NETLINK v0.30.
357<6>[ 1.798517] nf_conntrack version 0.5.0 (16054 buckets, 64216 max)
358<6>[ 1.798990] ctnetlink v0.93: registering with nfnetlink.
359<6>[ 1.799043] NF_TPROXY: Transparent proxy support initialized, version 4.1.0
360<6>[ 1.799052] NF_TPROXY: Copyright (c) 2006-2007 BalaBit IT Ltd.
361<6>[ 1.799297] xt_time: kernel timezone is -0000
362<6>[ 1.799439] IPv4 over IPv4 tunneling driver
363<6>[ 1.799891] gre: GRE over IPv4 demultiplexor driver
364<6>[ 1.799902] ip_gre: GRE over IPv4 tunneling driver
365<6>[ 1.800686] ip_tables: (C) 2000-2006 Netfilter Core Team
366<6>[ 1.800903] arp_tables: (C) 2002 David S. Miller
367<6>[ 1.800968] TCP: cubic registered
368<6>[ 1.800975] Initializing XFRM netlink socket
369<6>[ 1.801562] NET: Registered protocol family 10
370<6>[ 1.802590] Mobile IPv6
371<6>[ 1.802623] ip6_tables: (C) 2000-2006 Netfilter Core Team
372<6>[ 1.802803] IPv6 over IPv4 tunneling driver
373<6>[ 1.803876] NET: Registered protocol family 17
374<6>[ 1.803906] NET: Registered protocol family 15
375<5>[ 1.803995] Bridge firewalling registered
376<6>[ 1.804064] L2TP core driver, V2.0
377<6>[ 1.804080] PPPoL2TP kernel driver, V2.0
378<6>[ 1.804087] L2TP IP encapsulation support (L2TPv3)
379<6>[ 1.804106] L2TP netlink interface
380<6>[ 1.804134] L2TP ethernet pseudowire support (L2TPv3)
381<6>[ 1.804143] 8021q: 802.1Q VLAN Support v1.8
382<5>[ 1.804166] Registering the dns_resolver key type
383<6>[ 1.804524] VFP support v0.3: implementor 41 architecture 2 part 30 variant 7 rev 5
384<6>[ 1.804545] ThumbEE CPU extension supported.
385<5>[ 1.804564] Registering SWP/SWPB emulation handler
386<6>[ 1.804586] sunxi_bootup_extend_init: bootup extend state 1
387<6>[ 1.805454] cmdline,disp_para=
388<7>[ 1.805832] [HDMI] power vcc-hdmi-18
389<7>[ 1.820870] [mmc]: *** sunxi_mci_dump_errinfo(L915): smc 0 err, cmd 52, RTO !!
390<7>[ 1.821732] [mmc]: *** sunxi_mci_dump_errinfo(L915): smc 0 err, cmd 52, RTO !!
391<6>[ 1.825692] *******************Try sdio*******************
392<7>[ 1.826523] [mmc]: *** sunxi_mci_dump_errinfo(L915): smc 0 err, cmd 5, RTO !!
393<6>[ 1.826551] mmc0: req failed (CMD5): -110, retrying...
394<7>[ 1.827380] [mmc]: *** sunxi_mci_dump_errinfo(L915): smc 0 err, cmd 5, RTO !!
395<6>[ 1.827407] mmc0: req failed (CMD5): -110, retrying...
396<7>[ 1.828235] [mmc]: *** sunxi_mci_dump_errinfo(L915): smc 0 err, cmd 5, RTO !!
397<6>[ 1.828263] mmc0: req failed (CMD5): -110, retrying...
398<7>[ 1.829091] [mmc]: *** sunxi_mci_dump_errinfo(L915): smc 0 err, cmd 5, RTO !!
399<6>[ 1.829116] *******************Try sd *******************
400<3>[ 1.836833] drivers/rtc/hctosys.c: unable to open rtc device (rtc0)
401<3>[ 1.843822] ths_fetch_sysconfig_para: type err device_used = 1.
402<7>[ 1.853833] [rf_pm]: module power0 name vcc-wifi-33
403<7>[ 1.853848] [rf_pm]: Did not config module_power1 in sys_config
404<7>[ 1.853857] [rf_pm]: Did not config module_power2 in sys_config
405<7>[ 1.853866] [rf_pm]: Did not config module_power3 in sys_config
406<7>[ 1.853875] [rf_pm]: mod has no chip_en gpio
407<7>[ 1.853883] [rf_pm]: failed to fetch lpo_use_apclk
408<7>[ 1.853889] [rf_pm]: regulator on.
409<7>[ 1.853898] [wifi_pm]: no wifi used in configuration
410<7>[ 1.853906] [rfkill]: init no bt used in configuration
411<6>[ 1.853914] ALSA device list:
412<6>[ 1.853920] #0: audiocodec
413<6>[ 1.853926] #1: sndhdmi
414<6>[ 1.854416] Freeing init memory: 260K
415<3>[ 1.855357] init: init proc start
416<4>[ 1.863356] init (1): /proc/1/oom_adj is deprecated, please use /proc/1/oom_score_adj instead.
417<6>[ 1.898114] mmc0: new high speed SDHC card at address aaaa
418<6>[ 1.898704] mmcblk0: mmc0:aaaa SE32G 29.7 GiB
419<6>[ 1.899919] mmcblk0: p1 p2 p3
420<6>[ 1.900843] *******************sd init ok*******************
421<3>[ 2.001696] init: start e2fsck listening...
422<6>[ 2.014937] EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. Opts: (null)
423<6>[ 2.031258] EXT4-fs (mmcblk0p3): mounted filesystem with ordered data mode. Opts: nomblk_io_submit,errors=remount-ro
424<6>[ 2.050100] usb 2-1.2: new full-speed USB device number 3 using sunxi-ehci
425<6>[ 2.120063] fs_mgr: Running /system/bin/e2fsck on /dev/block/by-name/UDISK
426<7>[ 2.175630] e2fsck->main: e2fsck start...
427<7>[ 2.175673] e2fsck->pipe_write: pipe_write type=1
428<6>[ 2.182151] usb 2-1.2: New USB device found, idVendor=222a, idProduct=0001
429<6>[ 2.182169] usb 2-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
430<6>[ 2.182180] usb 2-1.2: Product: ILITEK-TP
431<6>[ 2.182188] usb 2-1.2: Manufacturer: ILITEK
432<6>[ 2.182196] usb 2-1.2: SerialNumber: V06.00.00.00
433<7>[ 2.183047] usbhid_lookup_quirk: uid:0x222a pid:0x0001 quirks:0x0000
434<7>[ 2.183432] usbhid_lookup_quirk: uid:0x222a pid:0x0001 quirks:0x0000
435<7>[ 2.189410] usbhid_lookup_quirk: uid:0x222a pid:0x0001 quirks:0x0000
436<7>[ 2.189794] usbhid_lookup_quirk: uid:0x222a pid:0x0001 quirks:0x0000
437<6>[ 2.192905] hid-generic 0003:222A:0001.0002: input,hiddev0,hidraw0: USB HID v1.10 Mouse [ILITEK ILITEK-TP] on usb-sunxi-ehci-1.2/input1
438<6>[ 2.196115] e2fsck: e2fsck 1.41.14 (22-Dec-2010)
439<6>[ 2.196183] e2fsck: UDISK: clean, 578/1900544 files, 204703/7591936 blocks
440<6>[ 2.215135] EXT4-fs (mmcblk0p3): mounted filesystem with ordered data mode. Opts: nomblk_io_submit,barrier=1,noauto_da_alloc
441<3>[ 2.229527] init: exec: pid 110 exited with return code 1: Unknown error 256
442<6>[ 2.300039] usb 2-1.4: new low-speed USB device number 4 using sunxi-ehci
443<6>[ 2.433922] usb 2-1.4: New USB device found, idVendor=275d, idProduct=0ba6
444<6>[ 2.433951] usb 2-1.4: New USB device strings: Mfr=0, Product=1, SerialNumber=0
445<6>[ 2.433973] usb 2-1.4: Product: USB OPTICAL MOUSE
446<7>[ 2.435608] usbhid_lookup_quirk: uid:0x275d pid:0x0ba6 quirks:0x0000
447<7>[ 2.435925] usbhid_lookup_quirk: uid:0x275d pid:0x0ba6 quirks:0x0000
448<4>[ 2.440064] [DISP] disp_device_attached_and_enable,line:159:attched ok, mgr0<-->device0, type=4, mode=10
449<7>[ 2.440106] Hdmi_set_display_mode: mode:10, tbl[10]={mode=10, hdmi_mode=16}
450<6>[ 2.440134] hid-generic 0003:275D:0BA6.0003: input,hidraw1: USB HID v1.11 Mouse [USB OPTICAL MOUSE ] on usb-sunxi-ehci-1.4/input0
451<7>[ 2.906598] Parse_DTD_Block: 2560x1600@59
452<7>[ 2.906612] enabling mode: HDMI2560_1600P (43)
453<3>[ 3.006316] init: C_IN_START
454<3>[ 3.009329] init: path = /dev/block/by-name/UDISKParse_DTD_Block: 1920x1080@60
455<7>[ 3.166093] enabling mode: HDMI1080P_60 (16)
456<7>[ 3.166100] Parse_DTD_Block: 1920x540@60
457<7>[ 3.166106] enabling mode: HDMI1080I_60 (5)
458<7>[ 3.166112] Parse_DTD_Block: 1280x720@60
459<7>[ 3.166118] enabling mode: HDMI720P_60 (4)
460<7>[ 3.166124] Parse_DTD_Block: 720x480@59
461<7>[ 3.166129] enabling mode: HDMI480P (2)
462<7>[ 3.196147] bsp_hdmi_video: id=9, vic=16, dclk=2, int=0, 1792x1024 (7,4)
463<3>[ 5.882784] init: defined DONT_SHOW_INITLOGO
464<3>[ 5.888496] init: disp=1,type=2,mode=11
465<6>[ 5.921519] Get mali parameter successfully
466<6>[ 5.921864] Init Mali gpu successfully
467<7>[ 5.923556] Mali: Mali device driver loaded
468<3>[ 6.316510] this module is used not!
469<7>[ 6.320552] gpio_init finish with uesd 0!
470<6>[ 6.471549] Adding 131068k swap on /data/swapfile. Priority:-1 extents:1 across:131068k SS
471<6>[ 6.518496] rtc-ds1307 0-0068: rtc core: registered ds1307 as rtc0
472<6>[ 6.518525] rtc-ds1307 0-0068: 56 bytes nvram
473<3>[ 6.519284] i2c i2c-0: Failed to register i2c client ds3231 at 0x68 (-16)
474<3>[ 6.523097] init: get_disp_policy: 2 for modify configs.
475<3>[ 6.523224] init: The device is not low memory 1003
476<3>[ 6.523274] init: display policy: force to dual policy
477<3>[ 6.525448] init: untracked pid 113 exited
478<4>[ 6.572210] snd_usb_audio: Unknown symbol snd_hwdep_new (err 0)
479<6>[ 6.575176] Loading modules backported from Linux version v3.15.9-0-g0617859
480<6>[ 6.575194] Backport generated by backports.git v3.15.9-1-0-g3c01584
481<6>[ 6.601926] Bluetooth: Core ver 2.19
482<6>[ 6.602013] NET: Registered protocol family 31
483<6>[ 6.602026] Bluetooth: HCI device and connection manager initialized
484<6>[ 6.602080] Bluetooth: HCI socket layer initialized
485<6>[ 6.602095] Bluetooth: L2CAP socket layer initialized
486<6>[ 6.602137] Bluetooth: SCO socket layer initialized
487<6>[ 6.604992] Bluetooth: HIDP (Human Interface Emulation) ver 1.2
488<6>[ 6.605043] Bluetooth: HIDP socket layer initialized
489<6>[ 6.608719] Bluetooth: RFCOMM socket layer initialized
490<6>[ 6.608756] Bluetooth: RFCOMM ver 1.11
491<6>[ 6.611032] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
492<6>[ 6.611047] Bluetooth: BNEP filters: protocol multicast
493<6>[ 6.611082] Bluetooth: BNEP socket layer initialized
494<6>[ 6.613895] Bluetooth: HCI UART driver ver 2.2
495<6>[ 6.613908] Bluetooth: HCI H4 protocol initialized
496<6>[ 6.613915] Bluetooth: HCI BCSP protocol initialized
497<6>[ 6.613922] Bluetooth: HCILL protocol initialized
498<6>[ 6.613928] Bluetooth: HCIATH3K protocol initialized
499<6>[ 6.613935] Bluetooth: HCI Three-wire UART (H5) protocol initialized
500<6>[ 6.616657] usbcore: registered new interface driver btusb
501<6>[ 6.617920] Bluetooth: Generic Bluetooth SDIO driver ver 0.1
502<6>[ 6.619290] usbcore: registered new interface driver bcm203x
503<6>[ 6.632851] cfg80211: Calling CRDA to update world regulatory domain
504<3>[ 6.713504] healthd: Could not open /sys/class/power_supply
505<3>[ 6.715547] init: cannot find '/system/etc/install-recovery.sh', disabling 'flash_recovery'
506<3>[ 6.729071] healthd: No charger supplies found
507<4>[ 6.734083] healthd: BatteryStatusPath not found
508<4>[ 6.734097] healthd: BatteryHealthPath not found
509<4>[ 6.734107] healthd: BatteryPresentPath not found
510<4>[ 6.734115] healthd: BatteryCapacityPath not found
511<4>[ 6.734124] healthd: BatteryVoltagePath not found
512<4>[ 6.734132] healthd: BatteryTemperaturePath not found
513<4>[ 6.734141] healthd: BatteryTechnologyPath not found
514<3>[ 6.924656] android_usb: already disabled
515<3>[ 6.929339] init: using deprecated syntax for specifying property 'sys.usb.config', use ${name} instead
516<3>[ 6.940599] init: using deprecated syntax for specifying property 'sys.usb.config', use ${name} instead
517<6>[ 6.942386] adb_open
518<6>[ 6.942398] mtp_bind_config
519<7>[ 6.942414] ep_matches, wrn: endpoint already claimed, ep(0xc092c230, 0xef040d00, ep1in-bulk)
520<7>[ 6.942424] ep_matches, wrn: endpoint already claimed, ep(0xc092c230, 0xef040d00, ep1in-bulk)
521<7>[ 6.942432] ep_matches, wrn: endpoint already claimed, ep(0xc092c27c, 0xef040d00, ep1out-bulk)
522<7>[ 6.942439] gadget_is_softwinner_otg is not -int
523<7>[ 6.942444] gadget_is_softwinner_otg is not -int
524<6>[ 6.942475] adb_bind_config
525<7>[ 6.942483] ep_matches, wrn: endpoint already claimed, ep(0xc092c230, 0xef040d00, ep1in-bulk)
526<7>[ 6.942491] ep_matches, wrn: endpoint already claimed, ep(0xc092c27c, 0xef040d00, ep1out-bulk)
527<7>[ 6.942500] ep_matches, wrn: endpoint already claimed, ep(0xc092c230, 0xef040d00, ep1in-bulk)
528<7>[ 6.942512] ep_matches, wrn: endpoint already claimed, ep(0xc092c27c, 0xef040d00, ep1out-bulk)
529<7>[ 6.942523] ep_matches, wrn: endpoint already claimed, ep(0xc092c2c8, 0xef0b4cc0, ep2in-bulk)
530<6>[ 6.973461] gmac0: probed
531<6>[ 6.973775] gmac0 gmac0: eth0: eth0: PHY ID 00441400 at 0 IRQ poll (gmac0-0:00)
532<6>[ 11.970245] PHY: gmac0-0:00 - Link is Up - 100/Full
533<6>[ 13.511840] warning: `zygote' uses 32-bit capabilities (legacy support in use)
534<6>[ 16.332474] request_suspend_state: wakeup (3->0) at 16332458177 (2020-03-17 12:46:58.730292503 UTC)
535<6>[ 16.417622] lowmemorykiller: lowmem_shrink: convert oom_adj to oom_score_adj:
536<6>[ 16.417648] lowmemorykiller: oom_adj 1 => oom_score_adj 58
537<6>[ 16.417656] lowmemorykiller: oom_adj 3 => oom_score_adj 176
538<6>[ 16.417664] lowmemorykiller: oom_adj 5 => oom_score_adj 294
539<6>[ 16.417672] lowmemorykiller: oom_adj 7 => oom_score_adj 411
540<6>[ 16.417681] lowmemorykiller: oom_adj 9 => oom_score_adj 529
541<6>[ 16.417689] lowmemorykiller: oom_adj 15 => oom_score_adj 1000
542<6>[ 17.204852] acc_open
543<6>[ 17.204880] acc_release
544<6>[ 17.273332] vmouse_input_dev_open
545<6>[ 17.350126] vmouse_input_dev_close
546<6>[ 17.400222] vmouse_input_dev_open
547<7>[ 17.880058] eth0: no IPv6 routers present
548<4>[ 17.924535] [DISP] disp_ioctl,line:1608:para err in disp_ioctl, cmd = 0x9,screen id = 2
549<6>[ 20.069619] usbcore: registered new interface driver uvcvideo
550<6>[ 20.069634] USB Video Class driver (v1.1.1)
551<3>[ 20.108292] [SPDIF]sunxi-spdif cannot find any using configuration for controllers, return directly!
552<3>[ 20.137389] [SPDIF]sndspdif cannot find any using configuration for controllers, return directly!
553<4>[ 20.155029] [SPDIF] driver not init,just return.
554<6>[ 20.223899] usbcore: registered new interface driver snd-usb-audio
555<6>[ 124.762823] hid-multitouch 0003:222A:0001.0001: input,hidraw2: USB HID v1.10 Device [ILITEK ILITEK-TP] on usb-sunxi-ehci-1.2/input0
556<4>[ 137.018977] [DISP] disp_ioctl,line:1608:para err in disp_ioctl, cmd = 0x9,screen id = 2
557<6>[ 137.030694] request_suspend_state: sleep (0->3) at 137030653610 (2020-03-17 12:48:59.428487270 UTC)
558<6>[ 137.031148] backlight_early_suspend
559<6>[ 137.340060] suspend
560<4>[ 137.340086] [DISP] disp_hdmi_suspend,line:485:
561<6>[ 137.340095] [HDMI]hdmi suspend
562<6>[ 137.340101] backlight_early_suspend finish
563<6>[ 142.031180] PM: suspend entry 2020-03-17 12:49:04.428986439 UTC
564<7>[ 142.031207] [pm]state:3 valid
565<6>[ 142.031220] PM: Syncing filesystems ... done.
566<7>[ 142.031952] PM: Preparing system for mem sleep
567<7>[ 142.033623] Freezing user space processes ... (elapsed 0.001 seconds) done.
568<7>[ 142.035591] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done.
569<7>[ 142.037286] PM: Entering mem sleep
570<7>[ 142.037303] Suspending console(s) (use no_console_suspend to debug)
571<7>[ 142.040590] [cedar] standby suspend
572<7>[ 142.040926] [mmc]: sdc0 power_supply is null
573<7>[ 142.041781] [mmc]: smc 1 suspend
574<4>[ 142.042985] sw_uart_suspend()1390 - uart0 suspend
575<6>[ 142.043117] MBUS_PMU MBUS_PMU: suspend okay
576<7>[ 142.043191] [ddrfreq] sunxi_ddrfreq_suspend: enter!
577<7>[ 142.043594] [mmc]: smc 0 suspend
578<6>[ 142.044885] disp_suspend
579<7>[ 142.044900] hwc_suspend after lock
580<7>[ 142.044913] hwc_suspend release lock
581<6>[ 142.044925] disp_suspend finish
582<6>[ 142.160334] PM: suspend of devices complete after 122.375 msecs
583<6>[ 142.160965] PM: late suspend of devices complete after 0.602 msecs
584<6>[ 142.161816] PM: noirq suspend of devices complete after 0.829 msecs
585<7>[ 142.161833] Disabling non-boot CPUs ...
586<5>[ 142.261536] CPU1: shutdown
587<6>[ 142.261557] [hotplug]: cpu(3) try to kill cpu(1)
588<6>[ 142.262644] [hotplug]: cpu1 is killed! .
589<4>[ 142.340997] IRQ82 no longer affine to CPU2
590<4>[ 142.341024] IRQ92 no longer affine to CPU2
591<4>[ 142.341039] IRQ93 no longer affine to CPU2
592<4>[ 142.341066] IRQ104 no longer affine to CPU2
593<4>[ 142.341080] IRQ105 no longer affine to CPU2
594<4>[ 142.341094] IRQ106 no longer affine to CPU2
595<4>[ 142.341108] IRQ107 no longer affine to CPU2
596<4>[ 142.341122] IRQ108 no longer affine to CPU2
597<4>[ 142.341136] IRQ109 no longer affine to CPU2
598<4>[ 142.341150] IRQ110 no longer affine to CPU2
599<5>[ 142.341667] CPU2: shutdown
600<6>[ 142.341683] [hotplug]: cpu(0) try to kill cpu(2)
601<6>[ 142.342769] [hotplug]: cpu2 is killed! .
602<5>[ 142.421313] CPU3: shutdown
603<6>[ 142.421330] [hotplug]: cpu(0) try to kill cpu(3)
604<6>[ 142.422418] [hotplug]: cpu3 is killed! .
605<7>[ 142.424114] [pm]cpu resume:40901780
606<6>[ 142.424139] Suspended for 0.000 seconds
607<6>[ 142.424506] wakeup wake lock: event1-509
608<6>[ 142.424608] Enabling non-boot CPUs ...
609<7>[ 142.425252] CPU1: Booted secondary processor
610<6>[ 142.600108] CPU1 is up
611<7>[ 142.600530] CPU2: Booted secondary processor
612<6>[ 142.850126] CPU2 is up
613<7>[ 142.850571] CPU3: Booted secondary processor
614<6>[ 143.090130] CPU3 is up
615<6>[ 143.090756] PM: noirq resume of devices complete after 0.601 msecs
616<6>[ 143.091458] PM: early resume of devices complete after 0.310 msecs
617<7>[ 143.092618] [ddrfreq] sunxi_ddrfreq_resume: enter!
618<6>[ 143.092689] MBUS_PMU MBUS_PMU: resume okay
619<4>[ 143.112133] usb usb2: root hub lost power or was reset
620<4>[ 143.112155] usb usb1: root hub lost power or was reset
621<4>[ 143.112176] usb usb3: root hub lost power or was reset
622<6>[ 143.120090] disp_resume
623<7>[ 143.120103] hwc_resume
624<6>[ 143.120113] disp_resume
625<6>[ 143.120119] finish
626<4>[ 143.120295] sw_uart_resume()1432 - uart0 resume. DLH: 0, DLL: 13.
627<6>[ 143.123787] gmac0: probed
628<6>[ 143.124107] gmac0 gmac0: eth0: eth0: PHY ID 00441400 at 0 IRQ poll (gmac0-0:00)
629<7>[ 143.132309] ehci_irq: highspeed device connect
630<4>[ 143.132346] usb usb4: root hub lost power or was reset
631<7>[ 143.136130] [cedar] standby resume
632<7>[ 143.156357] [mmc]: smc 1 resume
633<7>[ 143.157779] [mmc]: sdc0 power_supply is null
634<4>[ 143.174097] usb usb6: root hub lost power or was reset
635<4>[ 143.194135] usb usb7: root hub lost power or was reset
636<4>[ 143.194157] usb usb8: root hub lost power or was reset
637<4>[ 143.214073] usb usb5: root hub lost power or was reset
638<7>[ 143.255871] [mmc]: smc 0 resume
639<6>[ 143.490152] usb 2-1: reset high-speed USB device number 2 using sunxi-ehci
640<6>[ 144.130121] usb 2-1.4: reset low-speed USB device number 4 using sunxi-ehci
641<6>[ 144.530130] usb 2-1.2: reset full-speed USB device number 3 using sunxi-ehci
642<6>[ 144.662926] PM: resume of devices complete after 1571.438 msecs
643<7>[ 144.663598] PM: Finishing wakeup.
644<7>[ 144.663611] Restarting tasks ... done.
645<6>[ 144.665339] PM: suspend exit 2020-03-17 12:49:23.003055708 UTC
646<6>[ 144.665370] suspend: exit suspend, ret = 0 (2020-03-17 12:49:23.003094999 UTC)
647<6>[ 144.679215] request_suspend_state: wakeup (3->0) at 144679183572 (2020-03-17 12:49:23.016918123 UTC)
648<6>[ 144.679298] backlight_late_resume
649<6>[ 144.679309] resume
650<4>[ 144.679321] [DISP] disp_hdmi_resume,line:506:
651<6>[ 144.709721] [HDMI]hdmi resume
652<6>[ 144.709760] backlight_late_resume finish
653<4>[ 144.710652] [DISP] disp_ioctl,line:1608:para err in disp_ioctl, cmd = 0x9,screen id = 2
654<7>[ 145.856648] Parse_DTD_Block: 2560x1600@59
655<7>[ 145.856678] enabling mode: HDMI2560_1600P (43)
656<7>[ 146.113290] Parse_DTD_Block: 1920x1080@60
657<7>[ 146.113311] enabling mode: HDMI1080P_60 (16)
658<7>[ 146.113328] Parse_DTD_Block: 1920x540@60
659<7>[ 146.113342] enabling mode: HDMI1080I_60 (5)
660<7>[ 146.113358] Parse_DTD_Block: 1280x720@60
661<7>[ 146.113372] enabling mode: HDMI720P_60 (4)
662<7>[ 146.113387] Parse_DTD_Block: 720x480@59
663<7>[ 146.113401] enabling mode: HDMI480P (2)
664<7>[ 146.143439] bsp_hdmi_video: id=9, vic=16, dclk=2, int=0, 1792x1024 (7,4)
665<6>[ 147.120280] PHY: gmac0-0:00 - Link is Up - 100/Full
666root@dolphin-fvd-p1:/ #