· 6 years ago · Sep 18, 2019, 03:34 PM
1 Performing kexec rebootSIGTERM received, booting...
2[ 58.411830] kexec_core: Starting new kernel
3[ 0.000000] dt-cpu-ftrs: setup for ISA 3000
4[ 0.000000] dt-cpu-ftrs: not enabling: system-call-vectored (disabled or unsupported by kernel)
5[ 0.000000] dt-cpu-ftrs: final cpu/mmu features = 0x0000f86f8f5fb1a7 0x3c006041
6[ 0.000000] hash-mmu: Page sizes from device-tree:
7[ 0.000000] hash-mmu: base_shift=12: shift=12, sllp=0x0000, avpnm=0x00000000, tlbiel=1, penc=0
8[ 0.000000] hash-mmu: base_shift=12: shift=16, sllp=0x0000, avpnm=0x00000000, tlbiel=1, penc=7
9[ 0.000000] hash-mmu: base_shift=12: shift=24, sllp=0x0000, avpnm=0x00000000, tlbiel=1, penc=56
10[ 0.000000] hash-mmu: base_shift=16: shift=16, sllp=0x0110, avpnm=0x00000000, tlbiel=1, penc=1
11[ 0.000000] hash-mmu: base_shift=16: shift=24, sllp=0x0110, avpnm=0x00000000, tlbiel=1, penc=8
12[ 0.000000] hash-mmu: base_shift=24: shift=24, sllp=0x0100, avpnm=0x00000001, tlbiel=0, penc=0
13[ 0.000000] hash-mmu: base_shift=34: shift=34, sllp=0x0120, avpnm=0x000007ff, tlbiel=0, penc=3
14[ 0.000000] Using 1TB segments
15[ 0.000000] hash-mmu: Partition table (____ptrval____)
16[ 0.000000] hash-mmu: Initializing hash mmu with SLB
17[ 0.000000] Linux version 5.2.15-4k-pages-dirty (root@galford) (gcc version 8.3.0 (Debian 8.3.0-6)) #3 SMP Wed Sep 18 07:17:24 PDT 2019
18[ 0.000000] Found initrd at 0xc0000000038e0000:0xc0000000046adabd
19[ 0.000000] OPAL: Found memory mapped LPC bus on chip 0
20[ 0.000000] Using PowerNV machine description
21[ 0.000000] printk: bootconsole [udbg0] enabled
22[ 0.000000] CPU maps initialized for 4 threads per core
23[ 0.000000] -----------------------------------------------------
24[ 0.000000] phys_mem_size = 0x8000000000
25[ 0.000000] dcache_bsize = 0x80
26[ 0.000000] icache_bsize = 0x80
27[ 0.000000] cpu_features = 0x0000f86f8f5fb1a7
28[ 0.000000] possible = 0x0000fbffcf5fb1a7
29[ 0.000000] always = 0x00000003800081a1
30[ 0.000000] cpu_user_features = 0xdc0065c2 0xaee00000
31[ 0.000000] mmu_features = 0x7c006001
32[ 0.000000] firmware_features = 0x0000000110000000
33[ 0.000000] hash-mmu: ppc64_pft_size = 0x0
34[ 0.000000] hash-mmu: htab_hash_mask = 0x3ffffff
35[ 0.000000] hash-mmu: kernel vmalloc start = 0xc0003d0000000000
36[ 0.000000] hash-mmu: kernel IO start = 0xc0003e0000000000
37[ 0.000000] hash-mmu: kernel vmemmap start = 0xc0003f0000000000
38[ 0.000000] -----------------------------------------------------
39[ 0.000000] cma: Reserved 26224 MiB at 0x0000203599000000
40[ 0.000000] numa: NODE_DATA [mem 0x3fff45ad00-0x3fff45ffff]
41[ 0.000000] numa: NODE_DATA [mem 0x203fff7fa880-0x203fff7ffb7f]
42[ 0.000000] rfi-flush: mttrig type flush available
43[ 0.000000] count-cache-flush: software flush disabled.
44[ 0.000000] stf-barrier: eieio barrier available
45[ 0.000000] Initializing IODA2 PHB (/pciex@600c3c0000000)
46[ 0.000000] PCI host bridge /pciex@600c3c0000000 (primary) ranges:
47[ 0.000000] MEM 0x000600c000000000..0x000600c07ffeffff -> 0x0000000080000000
48[ 0.000000] MEM 0x0006000000000000..0x0006003fffffffff -> 0x0006000000000000 (M64 #1..31)
49[ 0.000000] Using M64 #31 as default window
50[ 0.000000] 512 (511) PE's M32: 0x80000000 [segment=0x400000]
51[ 0.000000] M64: 0x4000000000 [segment=0x20000000]
52[ 0.000000] Allocated bitmap for 4088 MSIs (base IRQ 0xfe000)
53[ 0.000000] Initializing IODA2 PHB (/pciex@600c3c0100000)
54[ 0.000000] PCI host bridge /pciex@600c3c0100000 ranges:
55[ 0.000000] MEM 0x000600c080000000..0x000600c0fffeffff -> 0x0000000080000000
56[ 0.000000] MEM 0x0006004000000000..0x0006007fffffffff -> 0x0006004000000000 (M64 #1..15)
57[ 0.000000] Using M64 #15 as default window
58[ 0.000000] 256 (255) PE's M32: 0x80000000 [segment=0x800000]
59[ 0.000000] M64: 0x4000000000 [segment=0x40000000]
60[ 0.000000] Allocated bitmap for 2040 MSIs (base IRQ 0xfd800)
61[ 0.000000] Initializing IODA2 PHB (/pciex@600c3c0200000)
62[ 0.000000] PCI host bridge /pciex@600c3c0200000 ranges:
63[ 0.000000] MEM 0x000600c100000000..0x000600c17ffeffff -> 0x0000000080000000
64[ 0.000000] MEM 0x0006008000000000..0x000600bfffffffff -> 0x0006008000000000 (M64 #1..15)
65[ 0.000000] Using M64 #15 as default window
66[ 0.000000] 256 (255) PE's M32: 0x80000000 [segment=0x800000]
67[ 0.000000] M64: 0x4000000000 [segment=0x40000000]
68[ 0.000000] Allocated bitmap for 2040 MSIs (base IRQ 0xfd000)
69[ 0.000000] Initializing IODA2 PHB (/pciex@600c3c0300000)
70[ 0.000000] PCI host bridge /pciex@600c3c0300000 ranges:
71[ 0.000000] MEM 0x000600c180000000..0x000600c1fffeffff -> 0x0000000080000000
72[ 0.000000] MEM 0x0006020000000000..0x0006023fffffffff -> 0x0006020000000000 (M64 #1..31)
73[ 0.000000] Using M64 #31 as default window
74[ 0.000000] 512 (511) PE's M32: 0x80000000 [segment=0x400000]
75[ 0.000000] M64: 0x4000000000 [segment=0x20000000]
76[ 0.000000] Allocated bitmap for 4088 MSIs (base IRQ 0xfc000)
77[ 0.000000] Initializing IODA2 PHB (/pciex@600c3c0400000)
78[ 0.000000] PCI host bridge /pciex@600c3c0400000 ranges:
79[ 0.000000] MEM 0x000600c200000000..0x000600c27ffeffff -> 0x0000000080000000
80[ 0.000000] MEM 0x0006024000000000..0x0006027fffffffff -> 0x0006024000000000 (M64 #1..15)
81[ 0.000000] Using M64 #15 as default window
82[ 0.000000] 256 (255) PE's M32: 0x80000000 [segment=0x800000]
83[ 0.000000] M64: 0x4000000000 [segment=0x40000000]
84[ 0.000000] Allocated bitmap for 2040 MSIs (base IRQ 0xfb800)
85[ 0.000000] Initializing IODA2 PHB (/pciex@600c3c0500000)
86[ 0.000000] PCI host bridge /pciex@600c3c0500000 ranges:
87[ 0.000000] MEM 0x000600c280000000..0x000600c2fffeffff -> 0x0000000080000000
88[ 0.000000] MEM 0x0006028000000000..0x000602bfffffffff -> 0x0006028000000000 (M64 #1..15)
89[ 0.000000] Using M64 #15 as default window
90[ 0.000000] 256 (255) PE's M32: 0x80000000 [segment=0x800000]
91[ 0.000000] M64: 0x4000000000 [segment=0x40000000]
92[ 0.000000] Allocated bitmap for 2040 MSIs (base IRQ 0xfb000)
93[ 0.000000] Initializing IODA2 PHB (/pciex@620c3c0000000)
94[ 0.000000] PCI host bridge /pciex@620c3c0000000 ranges:
95[ 0.000000] MEM 0x000620c000000000..0x000620c07ffeffff -> 0x0000000080000000
96[ 0.000000] MEM 0x0006200000000000..0x0006203fffffffff -> 0x0006200000000000 (M64 #1..31)
97[ 0.000000] Using M64 #31 as default window
98[ 0.000000] 512 (511) PE's M32: 0x80000000 [segment=0x400000]
99[ 0.000000] M64: 0x4000000000 [segment=0x20000000]
100[ 0.000000] Allocated bitmap for 4088 MSIs (base IRQ 0x1fe000)
101[ 0.000000] Initializing IODA2 PHB (/pciex@620c3c0100000)
102[ 0.000000] PCI host bridge /pciex@620c3c0100000 ranges:
103[ 0.000000] MEM 0x000620c080000000..0x000620c0fffeffff -> 0x0000000080000000
104[ 0.000000] MEM 0x0006204000000000..0x0006207fffffffff -> 0x0006204000000000 (M64 #1..15)
105[ 0.000000] Using M64 #15 as default window
106[ 0.000000] 256 (255) PE's M32: 0x80000000 [segment=0x800000]
107[ 0.000000] M64: 0x4000000000 [segment=0x40000000]
108[ 0.000000] Allocated bitmap for 2040 MSIs (base IRQ 0x1fd800)
109[ 0.000000] Initializing IODA2 PHB (/pciex@620c3c0200000)
110[ 0.000000] PCI host bridge /pciex@620c3c0200000 ranges:
111[ 0.000000] MEM 0x000620c100000000..0x000620c17ffeffff -> 0x0000000080000000
112[ 0.000000] MEM 0x0006208000000000..0x000620bfffffffff -> 0x0006208000000000 (M64 #1..15)
113[ 0.000000] Using M64 #15 as default window
114[ 0.000000] 256 (255) PE's M32: 0x80000000 [segment=0x800000]
115[ 0.000000] M64: 0x4000000000 [segment=0x40000000]
116[ 0.000000] Allocated bitmap for 2040 MSIs (base IRQ 0x1fd000)
117[ 0.000000] Initializing IODA2 PHB (/pciex@620c3c0300000)
118[ 0.000000] PCI host bridge /pciex@620c3c0300000 ranges:
119[ 0.000000] MEM 0x000620c180000000..0x000620c1fffeffff -> 0x0000000080000000
120[ 0.000000] MEM 0x0006220000000000..0x0006223fffffffff -> 0x0006220000000000 (M64 #1..31)
121[ 0.000000] Using M64 #31 as default window
122[ 0.000000] 512 (511) PE's M32: 0x80000000 [segment=0x400000]
123[ 0.000000] M64: 0x4000000000 [segment=0x20000000]
124[ 0.000000] Allocated bitmap for 4088 MSIs (base IRQ 0x1fc000)
125[ 0.000000] OPAL nvram setup, 589824 bytes
126[ 0.000000] barrier-nospec: using ORI speculation barrier
127[ 0.000000] Zone ranges:
128[ 0.000000] Normal [mem 0x0000000000000000-0x0000203fffffffff]
129[ 0.000000] Movable zone start for each node
130[ 0.000000] Early memory node ranges
131[ 0.000000] node 0: [mem 0x0000000000000000-0x0000003fffffffff]
132[ 0.000000] node 8: [mem 0x0000200000000000-0x0000203fffffffff]
133[ 0.000000] Initmem setup node 0 [mem 0x0000000000000000-0x0000003fffffffff]
134[ 0.000000] Initmem setup node 8 [mem 0x0000200000000000-0x0000203fffffffff]
135[ 0.000000] percpu: max_distance=0x200001200000 too large for vmalloc space 0x10000000000
136[ 0.000000] PERCPU: auto allocator failed (-22), falling back to page size
137[ 0.000000] percpu: 39 4K pages/cpu s139032 r8192 d12520
138[ 0.000000] Built 2 zonelists, mobility grouping on. Total pages: 132120576
139[ 0.000000] Policy zone: Normal
140[ 0.000000] Kernel command line: root=UUID=2ebf0d90-70bb-4e18-8f35-8e572a8c727d ro rootflags=subvol=@ apparmor=1 module_blacklist=bcache security=apparmor disable_radix=yes mem-256G
141[ 0.000000] printk: log_buf_len individual max cpu contribution: 8192 bytes
142[ 0.000000] printk: log_buf_len total cpu_extra contributions: 1171456 bytes
143[ 0.000000] printk: log_buf_len min size: 131072 bytes
144[ 0.000000] printk: log_buf_len: 2097152 bytes
145[ 0.000000] printk: early log buf free: 117896(89%)
146[ 0.000000] Memory: 492903012K/536870912K available (12280K kernel code, 1072K rwdata, 2236K rodata, 3684K init, 736K bss, 17114524K reserved, 26853376K cma-reserved)
147[ 0.000000] random: get_random_u32 called from cache_grow_begin+0x264/0x7f0 with crng_init=0
148[ 0.000000] ftrace: allocating 31730 entries in 187 pages
149[ 0.000000] rcu: Hierarchical RCU implementation.
150[ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 100 jiffies.
151[ 0.000000] NR_IRQS: 512, nr_irqs: 512, preallocated irqs: 16
152[ 0.000000] xive: Interrupt handling initialized with native backend
153[ 0.000000] xive: Using priority 7 for all interrupts
154[ 0.000000] xive: Using 4kB queues
155[ 0.000007] time_init: 56 bit decrementer (max: 7fffffffffffff)
156[ 0.003206] clocksource: timebase: mask: 0xffffffffffffffff max_cycles: 0x761537d007, max_idle_ns: 440795202126 ns
157[ 0.008548] clocksource: timebase mult[1f40000] shift[24] registered
158[ 0.014246] Console: colour dummy device 80x25
159[ 0.017406] printk: console [hvc0] enabled
160[ 0.017406] printk: console [hvc0] enabled
161[ 0.022593] printk: bootconsole [udbg0] disabled
162[ 0.022593] printk: bootconsole [udbg0] disabled
163[ 0.027893] mempolicy: Enabling automatic NUMA balancing. Configure with numa_balancing= or the kernel.numa_balancing sysctl
164[ 0.027935] pid_max: default: 147456 minimum: 1152
165[ 0.029011] LSM: Security Framework initializing
166[ 0.029381] AppArmor: AppArmor initialized
167[ 0.043130] Dentry cache hash table entries: 16777216 (order: 15, 134217728 bytes)
168[ 0.049947] Inode-cache hash table entries: 8388608 (order: 14, 67108864 bytes)
169[ 0.050297] Mount-cache hash table entries: 262144 (order: 9, 2097152 bytes)
170[ 0.050538] Mountpoint-cache hash table entries: 262144 (order: 9, 2097152 bytes)
171[ 0.051381] *** VALIDATE proc ***
172[ 0.051925] *** VALIDATE cgroup1 ***
173[ 0.051949] *** VALIDATE cgroup2 ***
174[ 0.052587] EEH: PowerNV platform initialized
175[ 0.052615] POWER9 performance monitor hardware support registered
176[ 0.052700] rcu: Hierarchical SRCU implementation.
177[ 0.054763] smp: Bringing up secondary CPUs ...
178[ 0.621748] smp: Brought up 2 nodes, 144 CPUs
179[ 0.621779] numa: Node 0 CPUs: 0-71
180[ 0.621795] numa: Node 8 CPUs: 72-143
181[ 0.621810] Using shared cache scheduler topology
182[ 0.634709] devtmpfs: initialized
183[ 0.660239] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275000 ns
184[ 0.660994] futex hash table entries: 65536 (order: 11, 8388608 bytes)
185[ 0.853003] NET: Registered protocol family 16
186[ 0.853537] audit: initializing netlink subsys (disabled)
187[ 0.853630] audit: type=2000 audit(1568820516.827:1): state=initialized audit_enabled=0 res=1
188[ 0.854091] cpuidle: using governor menu
189[ 0.889806] PCI: Probing PCI hardware
190[ 0.889907] PCI host bridge to bus 0000:00
191[ 0.889930] pci_bus 0000:00: root bus resource [mem 0x600c000000000-0x600c07ffeffff] (bus address [0x80000000-0xfffeffff])
192[ 0.889994] pci_bus 0000:00: root bus resource [mem 0x6000000000000-0x6003fbfffffff 64bit pref]
193[ 0.890029] pci_bus 0000:00: root bus resource [bus 00-ff]
194[ 0.890070] pci_bus 0000:00: busn_res: [bus 00-ff] end is updated to ff
195[ 0.890149] pci 0000:00:00.0: [1014:04c1] type 01 class 0x060400
196[ 0.890400] pci 0000:00:00.0: PME# supported from D0 D3hot D3cold
197[ 0.901751] pci 0000:00:00.0: PCI bridge to [bus 01-ff]
198[ 0.901818] pci_bus 0000:00: busn_res: [bus 00-ff] end is updated to ff
199[ 0.901919] PCI host bridge to bus 0001:00
200[ 0.901937] pci_bus 0001:00: root bus resource [mem 0x600c080000000-0x600c0fffeffff] (bus address [0x80000000-0xfffeffff])
201[ 0.901999] pci_bus 0001:00: root bus resource [mem 0x6004000000000-0x6007f7fffffff 64bit pref]
202[ 0.902033] pci_bus 0001:00: root bus resource [bus 00-ff]
203[ 0.902062] pci_bus 0001:00: busn_res: [bus 00-ff] end is updated to ff
204[ 0.902123] pci 0001:00:00.0: [1014:04c1] type 01 class 0x060400
205[ 0.902394] pci 0001:00:00.0: PME# supported from D0 D3hot D3cold
206[ 0.908178] pci 0001:01:00.0: [1000:00ce] type 00 class 0x010400
207[ 0.908261] pci 0001:01:00.0: reg 0x10: [io 0x0000-0x00ff]
208[ 0.908315] pci 0001:01:00.0: reg 0x14: [mem 0x600c080140000-0x600c08014ffff 64bit]
209[ 0.908371] pci 0001:01:00.0: reg 0x1c: [mem 0x600c080100000-0x600c08013ffff 64bit]
210[ 0.908435] pci 0001:01:00.0: reg 0x30: [mem 0x00000000-0x000fffff pref]
211[ 0.908791] pci 0001:01:00.0: supports D1 D2
212[ 0.914479] pci 0001:00:00.0: PCI bridge to [bus 01]
213[ 0.914595] pci_bus 0001:00: busn_res: [bus 00-ff] end is updated to 01
214[ 0.914684] PCI host bridge to bus 0002:00
215[ 0.914723] pci_bus 0002:00: root bus resource [mem 0x600c100000000-0x600c17ffeffff] (bus address [0x80000000-0xfffeffff])
216[ 0.914773] pci_bus 0002:00: root bus resource [mem 0x6008000000000-0x600bf7fffffff 64bit pref]
217[ 0.914810] pci_bus 0002:00: root bus resource [bus 00-ff]
218[ 0.914858] pci_bus 0002:00: busn_res: [bus 00-ff] end is updated to ff
219[ 0.914939] pci 0002:00:00.0: [1014:04c1] type 01 class 0x060400
220[ 0.915212] pci 0002:00:00.0: PME# supported from D0 D3hot D3cold
221[ 0.926370] pci 0002:00:00.0: PCI bridge to [bus 01-ff]
222[ 0.926435] pci_bus 0002:00: busn_res: [bus 00-ff] end is updated to ff
223[ 0.926523] PCI host bridge to bus 0003:00
224[ 0.926559] pci_bus 0003:00: root bus resource [mem 0x600c180000000-0x600c1fffeffff] (bus address [0x80000000-0xfffeffff])
225[ 0.926617] pci_bus 0003:00: root bus resource [mem 0x6020000000000-0x6023fbfffffff 64bit pref]
226[ 0.926676] pci_bus 0003:00: root bus resource [bus 00-ff]
227[ 0.926727] pci_bus 0003:00: busn_res: [bus 00-ff] end is updated to ff
228[ 0.926798] pci 0003:00:00.0: [1014:04c1] type 01 class 0x060400
229[ 0.926915] random: fast init done
230[ 0.927064] pci 0003:00:00.0: PME# supported from D0 D3hot D3cold
231[ 0.932830] pci 0003:01:00.0: [104c:8241] type 00 class 0x0c0330
232[ 0.932919] pci 0003:01:00.0: reg 0x10: [mem 0x600c180000000-0x600c18000ffff 64bit]
233[ 0.932993] pci 0003:01:00.0: reg 0x18: [mem 0x600c180010000-0x600c180011fff 64bit]
234[ 0.933250] pci 0003:01:00.0: supports D1 D2
235[ 0.933279] pci 0003:01:00.0: PME# supported from D0 D1 D2 D3hot
236[ 0.938957] pci 0003:00:00.0: PCI bridge to [bus 01]
237[ 0.939064] pci_bus 0003:00: busn_res: [bus 00-ff] end is updated to 01
238[ 0.939178] PCI host bridge to bus 0004:00
239[ 0.939216] pci_bus 0004:00: root bus resource [mem 0x600c200000000-0x600c27ffeffff] (bus address [0x80000000-0xfffeffff])
240[ 0.939273] pci_bus 0004:00: root bus resource [mem 0x6024000000000-0x6027f7fffffff 64bit pref]
241[ 0.939322] pci_bus 0004:00: root bus resource [bus 00-ff]
242[ 0.939359] pci_bus 0004:00: busn_res: [bus 00-ff] end is updated to ff
243[ 0.939432] pci 0004:00:00.0: [1014:04c1] type 01 class 0x060400
244[ 0.939707] pci 0004:00:00.0: PME# supported from D0 D3hot D3cold
245[ 0.945471] pci 0004:01:00.0: [14e4:1657] type 00 class 0x020000
246[ 0.945571] pci 0004:01:00.0: reg 0x10: [mem 0x6024000000000-0x602400000ffff 64bit pref]
247[ 0.945645] pci 0004:01:00.0: reg 0x18: [mem 0x6024000010000-0x602400001ffff 64bit pref]
248[ 0.945707] pci 0004:01:00.0: reg 0x20: [mem 0x6024000020000-0x602400002ffff 64bit pref]
249[ 0.946008] pci 0004:01:00.0: PME# supported from D0 D3hot D3cold
250[ 0.946137] pci 0004:01:00.0: 8.000 Gb/s available PCIe bandwidth, limited by 5 GT/s x2 link at 0004:00:00.0 (capable of 16.000 Gb/s with 5 GT/s x4 link)
251[ 0.946362] pci 0004:01:00.1: [14e4:1657] type 00 class 0x020000
252[ 0.946477] pci 0004:01:00.1: reg 0x10: [mem 0x6024000030000-0x602400003ffff 64bit pref]
253[ 0.946547] pci 0004:01:00.1: reg 0x18: [mem 0x6024000040000-0x602400004ffff 64bit pref]
254[ 0.946605] pci 0004:01:00.1: reg 0x20: [mem 0x6024000050000-0x602400005ffff 64bit pref]
255[ 0.946904] pci 0004:01:00.1: PME# supported from D0 D3hot D3cold
256[ 0.952568] pci 0004:00:00.0: PCI bridge to [bus 01]
257[ 0.952716] pci_bus 0004:00: busn_res: [bus 00-ff] end is updated to 01
258[ 0.952813] PCI host bridge to bus 0005:00
259[ 0.952831] pci_bus 0005:00: root bus resource [mem 0x600c280000000-0x600c2fffeffff] (bus address [0x80000000-0xfffeffff])
260[ 0.952890] pci_bus 0005:00: root bus resource [mem 0x6028000000000-0x602bf7fffffff 64bit pref]
261[ 0.952927] pci_bus 0005:00: root bus resource [bus 00-ff]
262[ 0.952954] pci_bus 0005:00: busn_res: [bus 00-ff] end is updated to ff
263[ 0.953031] pci 0005:00:00.0: [1014:04c1] type 01 class 0x060400
264[ 0.953305] pci 0005:00:00.0: PME# supported from D0 D3hot D3cold
265[ 0.959086] pci 0005:01:00.0: [1a03:1150] type 01 class 0x060400
266[ 0.959421] pci 0005:01:00.0: supports D1 D2
267[ 0.959444] pci 0005:01:00.0: PME# supported from D0 D1 D2 D3hot D3cold
268[ 0.965094] pci 0005:00:00.0: PCI bridge to [bus 01-02]
269[ 0.965280] pci_bus 0005:02: extended config space not accessible
270[ 0.965376] pci 0005:02:00.0: [1a03:2000] type 00 class 0x030000
271[ 0.965458] pci 0005:02:00.0: reg 0x10: [mem 0x600c280000000-0x600c280ffffff]
272[ 0.965510] pci 0005:02:00.0: reg 0x14: [mem 0x600c281000000-0x600c28101ffff]
273[ 0.965575] pci 0005:02:00.0: reg 0x18: [io 0x0000-0x007f]
274[ 0.965777] pci 0005:02:00.0: supports D1 D2
275[ 0.965814] pci 0005:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold
276[ 0.971417] pci 0005:01:00.0: PCI bridge to [bus 02]
277[ 0.971509] pci_bus 0005:00: busn_res: [bus 00-ff] end is updated to 02
278[ 0.971626] PCI host bridge to bus 0030:00
279[ 0.971667] pci_bus 0030:00: root bus resource [mem 0x620c000000000-0x620c07ffeffff] (bus address [0x80000000-0xfffeffff])
280[ 0.971725] pci_bus 0030:00: root bus resource [mem 0x6200000000000-0x6203fbfffffff 64bit pref]
281[ 0.971782] pci_bus 0030:00: root bus resource [bus 00-ff]
282[ 0.971812] pci_bus 0030:00: busn_res: [bus 00-ff] end is updated to ff
283[ 0.971875] pci 0030:00:00.0: [1014:04c1] type 01 class 0x060400
284[ 0.972180] pci 0030:00:00.0: PME# supported from D0 D3hot D3cold
285[ 0.983391] pci 0030:00:00.0: PCI bridge to [bus 01-ff]
286[ 0.983460] pci_bus 0030:00: busn_res: [bus 00-ff] end is updated to ff
287[ 0.983561] PCI host bridge to bus 0031:00
288[ 0.983593] pci_bus 0031:00: root bus resource [mem 0x620c080000000-0x620c0fffeffff] (bus address [0x80000000-0xfffeffff])
289[ 0.983683] pci_bus 0031:00: root bus resource [mem 0x6204000000000-0x6207f7fffffff 64bit pref]
290[ 0.983732] pci_bus 0031:00: root bus resource [bus 00-ff]
291[ 0.983759] pci_bus 0031:00: busn_res: [bus 00-ff] end is updated to ff
292[ 0.983835] pci 0031:00:00.0: [1014:04c1] type 01 class 0x060400
293[ 0.984124] pci 0031:00:00.0: PME# supported from D0 D3hot D3cold
294[ 0.995334] pci 0031:00:00.0: PCI bridge to [bus 01-ff]
295[ 0.995403] pci_bus 0031:00: busn_res: [bus 00-ff] end is updated to ff
296[ 0.995492] PCI host bridge to bus 0032:00
297[ 0.995518] pci_bus 0032:00: root bus resource [mem 0x620c100000000-0x620c17ffeffff] (bus address [0x80000000-0xfffeffff])
298[ 0.995599] pci_bus 0032:00: root bus resource [mem 0x6208000000000-0x620bf7fffffff 64bit pref]
299[ 0.995667] pci_bus 0032:00: root bus resource [bus 00-ff]
300[ 0.995716] pci_bus 0032:00: busn_res: [bus 00-ff] end is updated to ff
301[ 0.995779] pci 0032:00:00.0: [1014:04c1] type 01 class 0x060400
302[ 0.996070] pci 0032:00:00.0: PME# supported from D0 D3hot D3cold
303[ 1.007260] pci 0032:00:00.0: PCI bridge to [bus 01]
304[ 1.007329] pci_bus 0032:00: busn_res: [bus 00-ff] end is updated to 01
305[ 1.007429] PCI host bridge to bus 0033:00
306[ 1.007458] pci_bus 0033:00: root bus resource [mem 0x620c180000000-0x620c1fffeffff] (bus address [0x80000000-0xfffeffff])
307[ 1.007498] pci_bus 0033:00: root bus resource [mem 0x6220000000000-0x6223fbfffffff 64bit pref]
308[ 1.007545] pci_bus 0033:00: root bus resource [bus 00-ff]
309[ 1.007584] pci_bus 0033:00: busn_res: [bus 00-ff] end is updated to ff
310[ 1.007671] pci 0033:00:00.0: [1014:04c1] type 01 class 0x060400
311[ 1.007975] pci 0033:00:00.0: PME# supported from D0 D3hot D3cold
312[ 1.013821] pci 0033:01:00.0: [9005:028f] type 00 class 0x010700
313[ 1.013920] pci 0033:01:00.0: reg 0x10: [mem 0x620c180200000-0x620c180207fff 64bit]
314[ 1.014027] pci 0033:01:00.0: reg 0x20: [io 0x0000-0x00ff]
315[ 1.014109] pci 0033:01:00.0: reg 0x30: [mem 0x00000000-0x001fffff pref]
316[ 1.014304] pci 0033:01:00.0: supports D1
317[ 1.014331] pci 0033:01:00.0: PME# supported from D0 D1 D3hot
318[ 1.020036] pci 0033:00:00.0: PCI bridge to [bus 01]
319[ 1.020147] pci_bus 0033:00: busn_res: [bus 00-ff] end is updated to 01
320[ 1.020184] pci 0000:00 : [PE# 1fe] Secondary bus 0x0000000000000000 associated with PE#1fe
321[ 1.020537] pci 0000:00:00.0: PCI bridge to [bus 01-ff]
322[ 1.020590] pci_bus 0000:00: resource 4 [mem 0x600c000000000-0x600c07ffeffff]
323[ 1.020632] pci_bus 0000:00: resource 5 [mem 0x6000000000000-0x6003fbfffffff 64bit pref]
324[ 1.020682] pci 0001:00:00.0: BAR 8: assigned [mem 0x600c080000000-0x600c0807fffff]
325[ 1.020736] pci 0001:00:00.0: BAR 7: no space for [io size 0x1000]
326[ 1.020777] pci 0001:00:00.0: BAR 7: failed to assign [io size 0x1000]
327[ 1.020825] pci 0001:01:00.0: BAR 6: assigned [mem 0x600c080000000-0x600c0800fffff pref]
328[ 1.020871] pci 0001:01:00.0: BAR 3: assigned [mem 0x600c080100000-0x600c08013ffff 64bit]
329[ 1.020952] pci 0001:01:00.0: BAR 1: assigned [mem 0x600c080140000-0x600c08014ffff 64bit]
330[ 1.021015] pci 0001:01:00.0: BAR 0: no space for [io size 0x0100]
331[ 1.021043] pci 0001:01:00.0: BAR 0: failed to assign [io size 0x0100]
332[ 1.021078] pci 0001:00 : [PE# fe] Secondary bus 0x0000000000000000 associated with PE#fe
333[ 1.021444] pci 0001:01 : [PE# fd] Secondary bus 0x0000000000000001 associated with PE#fd
334[ 1.021809] pci 0001:01 : [PE# fd] Setting up 32-bit TCE table at 0..80000000
335[ 1.034473] IOMMU table initialized, virtual merging enabled
336[ 1.034500] pci 0001:01 : [PE# fd] Setting up window#0 0..7fffffff pg=1000
337[ 1.034537] pci 0001:01 : [PE# fd] Enabling 64-bit DMA bypass
338[ 1.034558] pci 0001:00:00.0: PCI bridge to [bus 01]
339[ 1.034595] pci 0001:00:00.0: bridge window [mem 0x600c080000000-0x600c0ffefffff]
340[ 1.034647] pci_bus 0001:00: Some PCI device resources are unassigned, try booting with pci=realloc
341[ 1.034692] pci_bus 0001:00: resource 4 [mem 0x600c080000000-0x600c0fffeffff]
342[ 1.034748] pci_bus 0001:00: resource 5 [mem 0x6004000000000-0x6007f7fffffff 64bit pref]
343[ 1.034792] pci_bus 0001:01: resource 1 [mem 0x600c080000000-0x600c0ffefffff]
344[ 1.034848] pci 0002:00 : [PE# fe] Secondary bus 0x0000000000000000 associated with PE#fe
345[ 1.035207] pci 0002:00:00.0: PCI bridge to [bus 01-ff]
346[ 1.035278] pci_bus 0002:00: resource 4 [mem 0x600c100000000-0x600c17ffeffff]
347[ 1.035320] pci_bus 0002:00: resource 5 [mem 0x6008000000000-0x600bf7fffffff 64bit pref]
348[ 1.035390] pci 0003:00:00.0: BAR 8: assigned [mem 0x600c180000000-0x600c1803fffff]
349[ 1.035447] pci 0003:01:00.0: BAR 0: assigned [mem 0x600c180000000-0x600c18000ffff 64bit]
350[ 1.035514] pci 0003:01:00.0: BAR 2: assigned [mem 0x600c180010000-0x600c180011fff 64bit]
351[ 1.035591] pci 0003:00 : [PE# 1fe] Secondary bus 0x0000000000000000 associated with PE#1fe
352[ 1.035940] pci 0003:01 : [PE# 1fd] Secondary bus 0x0000000000000001 associated with PE#1fd
353[ 1.036295] pci 0003:01 : [PE# 1fd] Setting up 32-bit TCE table at 0..80000000
354[ 1.048956] pci 0003:01 : [PE# 1fd] Setting up window#0 0..7fffffff pg=1000
355[ 1.048990] pci 0003:01 : [PE# 1fd] Enabling 64-bit DMA bypass
356[ 1.049021] pci 0003:00:00.0: PCI bridge to [bus 01]
357[ 1.049055] pci 0003:00:00.0: bridge window [mem 0x600c180000000-0x600c1ffefffff]
358[ 1.049103] pci_bus 0003:00: resource 4 [mem 0x600c180000000-0x600c1fffeffff]
359[ 1.049150] pci_bus 0003:00: resource 5 [mem 0x6020000000000-0x6023fbfffffff 64bit pref]
360[ 1.049183] pci_bus 0003:01: resource 1 [mem 0x600c180000000-0x600c1ffefffff]
361[ 1.049257] pci 0004:00:00.0: BAR 9: assigned [mem 0x6024000000000-0x602403fffffff 64bit pref]
362[ 1.049304] pci 0004:01:00.0: BAR 0: assigned [mem 0x6024000000000-0x602400000ffff 64bit pref]
363[ 1.049361] pci 0004:01:00.0: BAR 2: assigned [mem 0x6024000010000-0x602400001ffff 64bit pref]
364[ 1.049438] pci 0004:01:00.0: BAR 4: assigned [mem 0x6024000020000-0x602400002ffff 64bit pref]
365[ 1.049504] pci 0004:01:00.1: BAR 0: assigned [mem 0x6024000030000-0x602400003ffff 64bit pref]
366[ 1.049580] pci 0004:01:00.1: BAR 2: assigned [mem 0x6024000040000-0x602400004ffff 64bit pref]
367[ 1.049635] pci 0004:01:00.1: BAR 4: assigned [mem 0x6024000050000-0x602400005ffff 64bit pref]
368[ 1.049722] pci 0004:00 : [PE# fe] Secondary bus 0x0000000000000000 associated with PE#fe
369[ 1.050104] pci 0004:01 : [PE# 00] Secondary bus 0x0000000000000001 associated with PE#0
370[ 1.050427] pci 0004:01 : [PE# 00] Setting up 32-bit TCE table at 0..80000000
371[ 1.063103] pci 0004:01 : [PE# 00] Setting up window#0 0..7fffffff pg=1000
372[ 1.063139] pci 0004:01 : [PE# 00] Enabling 64-bit DMA bypass
373[ 1.063168] pci 0004:00:00.0: PCI bridge to [bus 01]
374[ 1.063208] pci 0004:00:00.0: bridge window [mem 0x6024000000000-0x6027f7fffffff 64bit pref]
375[ 1.063244] pci_bus 0004:00: resource 4 [mem 0x600c200000000-0x600c27ffeffff]
376[ 1.063299] pci_bus 0004:00: resource 5 [mem 0x6024000000000-0x6027f7fffffff 64bit pref]
377[ 1.063333] pci_bus 0004:01: resource 2 [mem 0x6024000000000-0x6027f7fffffff 64bit pref]
378[ 1.063370] pci 0005:00:00.0: BAR 8: assigned [mem 0x600c280000000-0x600c2817fffff]
379[ 1.063423] pci 0005:00:00.0: BAR 7: no space for [io size 0x1000]
380[ 1.063462] pci 0005:00:00.0: BAR 7: failed to assign [io size 0x1000]
381[ 1.063495] pci 0005:01:00.0: BAR 8: assigned [mem 0x600c280000000-0x600c2817fffff]
382[ 1.063541] pci 0005:01:00.0: BAR 7: no space for [io size 0x1000]
383[ 1.063584] pci 0005:01:00.0: BAR 7: failed to assign [io size 0x1000]
384[ 1.063629] pci 0005:02:00.0: BAR 0: assigned [mem 0x600c280000000-0x600c280ffffff]
385[ 1.063677] pci 0005:02:00.0: BAR 1: assigned [mem 0x600c281000000-0x600c28101ffff]
386[ 1.063733] pci 0005:02:00.0: BAR 2: no space for [io size 0x0080]
387[ 1.063757] pci 0005:02:00.0: BAR 2: failed to assign [io size 0x0080]
388[ 1.063812] pci 0005:00 : [PE# fe] Secondary bus 0x0000000000000000 associated with PE#fe
389[ 1.064162] pci 0005:02 : [PE# fd] Secondary bus 0x0000000000000002..0x0000000000000002 associated with PE#fd
390[ 1.064520] pci 0005:02 : [PE# fd] Setting up 32-bit TCE table at 0..80000000
391[ 1.077199] pci 0005:02 : [PE# fd] Setting up window#0 0..7fffffff pg=1000
392[ 1.077234] pci 0005:02 : [PE# fd] Enabling 64-bit DMA bypass
393[ 1.077264] pci 0005:01:00.0: PCI bridge to [bus 02]
394[ 1.077290] pci 0005:01:00.0: bridge window [mem 0x600c280000000-0x600c2ffefffff]
395[ 1.077334] pci 0005:01 : [PE# fc] Secondary bus 0x0000000000000001 associated with PE#fc
396[ 1.077655] pci 0005:00:00.0: PCI bridge to [bus 01-02]
397[ 1.077683] pci 0005:00:00.0: bridge window [mem 0x600c280000000-0x600c2ffefffff]
398[ 1.077748] pci_bus 0005:00: Some PCI device resources are unassigned, try booting with pci=realloc
399[ 1.077807] pci_bus 0005:00: resource 4 [mem 0x600c280000000-0x600c2fffeffff]
400[ 1.077861] pci_bus 0005:00: resource 5 [mem 0x6028000000000-0x602bf7fffffff 64bit pref]
401[ 1.077918] pci_bus 0005:01: resource 1 [mem 0x600c280000000-0x600c2ffefffff]
402[ 1.077963] pci_bus 0005:02: resource 1 [mem 0x600c280000000-0x600c2ffefffff]
403[ 1.077987] pci 0030:00 : [PE# 1fe] Secondary bus 0x0000000000000000 associated with PE#1fe
404[ 1.078334] pci 0030:00:00.0: PCI bridge to [bus 01-ff]
405[ 1.078386] pci_bus 0030:00: resource 4 [mem 0x620c000000000-0x620c07ffeffff]
406[ 1.078442] pci_bus 0030:00: resource 5 [mem 0x6200000000000-0x6203fbfffffff 64bit pref]
407[ 1.078497] pci 0031:00 : [PE# fe] Secondary bus 0x0000000000000000 associated with PE#fe
408[ 1.078849] pci 0031:00:00.0: PCI bridge to [bus 01-ff]
409[ 1.078913] pci_bus 0031:00: resource 4 [mem 0x620c080000000-0x620c0fffeffff]
410[ 1.078967] pci_bus 0031:00: resource 5 [mem 0x6204000000000-0x6207f7fffffff 64bit pref]
411[ 1.079024] pci 0032:00 : [PE# fe] Secondary bus 0x0000000000000000 associated with PE#fe
412[ 1.079396] pci 0032:00:00.0: PCI bridge to [bus 01]
413[ 1.079458] pci_bus 0032:00: resource 4 [mem 0x620c100000000-0x620c17ffeffff]
414[ 1.079500] pci_bus 0032:00: resource 5 [mem 0x6208000000000-0x620bf7fffffff 64bit pref]
415[ 1.079561] pci 0033:00:00.0: BAR 8: assigned [mem 0x620c180000000-0x620c1803fffff]
416[ 1.079619] pci 0033:00:00.0: BAR 7: no space for [io size 0x1000]
417[ 1.079659] pci 0033:00:00.0: BAR 7: failed to assign [io size 0x1000]
418[ 1.079716] pci 0033:01:00.0: BAR 6: assigned [mem 0x620c180000000-0x620c1801fffff pref]
419[ 1.079771] pci 0033:01:00.0: BAR 0: assigned [mem 0x620c180200000-0x620c180207fff 64bit]
420[ 1.079849] pci 0033:01:00.0: BAR 4: no space for [io size 0x0100]
421[ 1.079891] pci 0033:01:00.0: BAR 4: failed to assign [io size 0x0100]
422[ 1.079942] pci 0033:00 : [PE# 1fe] Secondary bus 0x0000000000000000 associated with PE#1fe
423[ 1.080304] pci 0033:01 : [PE# 1fd] Secondary bus 0x0000000000000001 associated with PE#1fd
424[ 1.080652] pci 0033:01 : [PE# 1fd] Setting up 32-bit TCE table at 0..80000000
425[ 1.093320] pci 0033:01 : [PE# 1fd] Setting up window#0 0..7fffffff pg=1000
426[ 1.093349] pci 0033:01 : [PE# 1fd] Enabling 64-bit DMA bypass
427[ 1.093381] pci 0033:00:00.0: PCI bridge to [bus 01]
428[ 1.093417] pci 0033:00:00.0: bridge window [mem 0x620c180000000-0x620c1ffefffff]
429[ 1.093465] pci_bus 0033:00: Some PCI device resources are unassigned, try booting with pci=realloc
430[ 1.093511] pci_bus 0033:00: resource 4 [mem 0x620c180000000-0x620c1fffeffff]
431[ 1.093544] pci_bus 0033:00: resource 5 [mem 0x6220000000000-0x6223fbfffffff 64bit pref]
432[ 1.093599] pci_bus 0033:01: resource 1 [mem 0x620c180000000-0x620c1ffefffff]
433[ 1.093693] pci 0001:01:00.0: Adding to iommu group 0
434[ 1.093739] pci 0003:01:00.0: Adding to iommu group 1
435[ 1.093794] pci 0004:01:00.0: Adding to iommu group 2
436[ 1.093838] pci 0004:01:00.1: Adding to iommu group 2
437[ 1.093890] pci 0005:02:00.0: Adding to iommu group 3
438[ 1.093928] pci 0033:01:00.0: Adding to iommu group 4
439[ 1.094083] pci 0001:00:00.0: enabling device (0101 -> 0103)
440[ 1.094155] pci 0003:00:00.0: enabling device (0101 -> 0103)
441[ 1.094201] pci 0004:00:00.0: enabling device (0101 -> 0103)
442[ 1.094259] pci 0005:00:00.0: enabling device (0101 -> 0103)
443[ 1.094316] pci 0005:01:00.0: enabling device (0141 -> 0143)
444[ 1.094387] pci 0033:00:00.0: enabling device (0101 -> 0103)
445[ 1.095470] EEH: PCI Enhanced I/O Error Handling Enabled
446[ 1.098528] cpuidle-powernv: Default stop: psscr = 0x0000000000000330,mask=0x00000000003003ff
447[ 1.098550] cpuidle-powernv: Deepest stop: psscr = 0x0000000000300375,mask=0x00000000003003ff
448[ 1.098590] cpuidle-powernv: First stop level that may lose SPRs = 0x4
449[ 1.098605] cpuidle-powernv: First stop level that may lose timebase = 0x16
450[ 1.107546] HugeTLB registered 16.0 MiB page size, pre-allocated 0 pages
451[ 1.107566] HugeTLB registered 16.0 GiB page size, pre-allocated 0 pages
452[ 1.110248] pci 0005:02:00.0: vgaarb: VGA device added: decodes=io+mem,owns=none,locks=none
453[ 1.110277] pci 0005:02:00.0: vgaarb: bridge control possible
454[ 1.110296] pci 0005:02:00.0: vgaarb: setting as boot device (VGA legacy resources not available)
455[ 1.110330] vgaarb: loaded
456[ 1.110551] SCSI subsystem initialized
457[ 1.110992] usbcore: registered new interface driver usbfs
458[ 1.111032] usbcore: registered new interface driver hub
459[ 1.111417] usbcore: registered new device driver usb
460[ 1.111496] pps_core: LinuxPPS API ver. 1 registered
461[ 1.111525] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
462[ 1.111588] PTP clock support registered
463[ 1.112085] EDAC MC: Ver: 3.0.0
464[ 1.113351] clocksource: Switched to clocksource timebase
465[ 1.141626] *** VALIDATE hugetlbfs ***
466[ 1.142011] AppArmor: AppArmor Filesystem Enabled
467[ 1.145885] NET: Registered protocol family 2
468[ 1.146892] tcp_listen_portaddr_hash hash table entries: 65536 (order: 8, 1048576 bytes)
469[ 1.147857] TCP established hash table entries: 524288 (order: 10, 4194304 bytes)
470[ 1.150831] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
471[ 1.151508] TCP: Hash tables configured (established 524288 bind 65536)
472[ 1.152083] UDP hash table entries: 65536 (order: 9, 2097152 bytes)
473[ 1.153497] UDP-Lite hash table entries: 65536 (order: 9, 2097152 bytes)
474[ 1.155475] NET: Registered protocol family 1
475[ 1.155541] pci 0003:01:00.0: enabling device (0140 -> 0142)
476[ 1.155643] PCI: CLS 0 bytes, default 128
477[ 1.155741] Trying to unpack rootfs image as initramfs...
478[ 1.554541] Freeing initrd memory: 14132K
479[ 1.588825] workingset: timestamp_bits=38 max_order=27 bucket_order=0
480[ 1.592363] squashfs: version 4.0 (2009/01/31) Phillip Lougher
481[ 1.592573] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 250)
482[ 1.592618] io scheduler mq-deadline registered
483[ 1.592645] io scheduler kyber registered
484[ 1.592726] io scheduler bfq registered
485[ 1.595559] pci 0005:02:00.0: enabling device (0141 -> 0143)
486[ 1.595594] Using unsupported 1024x768 (null) at 600c280010000, depth=32, pitch=4096
487[ 1.678524] Console: switching to colour frame buffer device 128x48
488[ 1.759886] fb0: Open Firmware frame buffer device on /pciex@600c3c0500000/pci@0/pci@0/vga@0
489[ 1.760046] IPMI message handler: version 39.2
490[ 1.760093] ipmi device interface
491[ 1.779874] ipmi-powernv ibm,opal:ipmi: IPMI message handler: The GUID response from the BMC was too short, it was 1 but should have been 17. Assuming GUID is not available.
492[ 1.799273] ipmi-powernv ibm,opal:ipmi: IPMI message handler: Found new BMC (man_id: 0x00cb06, prod_id: 0x0001, dev_id: 0x00)
493[ 1.924209] hvc0: raw protocol on /ibm,opal/consoles/serial@0 (boot console)
494[ 1.924242] hvc0: No interrupts property, using OPAL event
495[ 1.924795] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
496[ 1.925321] pseries_rng: Registering IBM pSeries RNG driver
497[ 1.932532] brd: module loaded
498[ 1.969940] loop: module loaded
499[ 1.970301] libphy: Fixed MDIO Bus: probed
500[ 1.970505] tun: Universal TUN/TAP device driver, 1.6
501[ 1.970611] tg3.c:v3.137 (May 11, 2014)
502[ 1.970661] tg3 0004:01:00.0: enabling device (0140 -> 0142)
503[ 1.978910] tg3 0004:01:00.0 eth0: Tigon3 [partno(BCM95719) rev 5719001] (PCI Express) MAC address 2c:09:4d:00:02:fb
504[ 1.978941] tg3 0004:01:00.0 eth0: attached PHY is 5719C (10/100/1000Base-T Ethernet) (WireSpeed[1], EEE[1])
505[ 1.978975] tg3 0004:01:00.0 eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[1] TSOcap[1]
506[ 1.979018] tg3 0004:01:00.0 eth0: dma_rwctrl[00000000] dma_mask[64-bit]
507[ 1.979189] tg3 0004:01:00.1: enabling device (0140 -> 0142)
508[ 1.989328] tg3 0004:01:00.1 eth1: Tigon3 [partno(BCM95719) rev 5719001] (PCI Express) MAC address 2c:09:4d:00:02:fc
509[ 1.989356] tg3 0004:01:00.1 eth1: attached PHY is 5719C (10/100/1000Base-T Ethernet) (WireSpeed[1], EEE[1])
510[ 1.989393] tg3 0004:01:00.1 eth1: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[1] TSOcap[1]
511[ 1.989425] tg3 0004:01:00.1 eth1: dma_rwctrl[00000000] dma_mask[64-bit]
512[ 1.989668] xhci_hcd 0003:01:00.0: xHCI Host Controller
513[ 1.989713] xhci_hcd 0003:01:00.0: new USB bus registered, assigned bus number 1
514[ 1.989852] xhci_hcd 0003:01:00.0: hcc params 0x0270f06d hci version 0x96 quirks 0x0000000004000000
515[ 1.990632] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.02
516[ 1.990659] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
517[ 1.990703] usb usb1: Product: xHCI Host Controller
518[ 1.990751] usb usb1: Manufacturer: Linux 5.2.15-4k-pages-dirty xhci-hcd
519[ 1.990792] usb usb1: SerialNumber: 0003:01:00.0
520[ 1.991026] hub 1-0:1.0: USB hub found
521[ 1.991059] hub 1-0:1.0: 4 ports detected
522[ 1.991317] xhci_hcd 0003:01:00.0: xHCI Host Controller
523[ 1.991347] xhci_hcd 0003:01:00.0: new USB bus registered, assigned bus number 2
524[ 1.991405] xhci_hcd 0003:01:00.0: Host supports USB 3.0 SuperSpeed
525[ 1.991476] usb usb2: We don't know the algorithms for LPM for this host, disabling LPM.
526[ 1.991550] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.02
527[ 1.991589] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
528[ 1.991643] usb usb2: Product: xHCI Host Controller
529[ 1.991680] usb usb2: Manufacturer: Linux 5.2.15-4k-pages-dirty xhci-hcd
530[ 1.991733] usb usb2: SerialNumber: 0003:01:00.0
531[ 1.991959] hub 2-0:1.0: USB hub found
532[ 1.991993] hub 2-0:1.0: 4 ports detected
533[ 2.016253] rtc-opal opal-rtc: registered as rtc0
534[ 2.016298] i2c /dev entries driver
535[ 2.027983] device-mapper: uevent: version 1.0.3
536[ 2.028324] device-mapper: ioctl: 4.40.0-ioctl (2019-01-18) initialised: dm-devel@redhat.com
537[ 2.028360] powernv-cpufreq: cpufreq pstate min 0x63 nominal 0x5e max 0x0
538[ 2.028388] powernv-cpufreq: Workload Optimized Frequency is enabled in the platform
539[ 2.047242] crypto_register_alg 'aes' = 0
540[ 2.050895] crypto_register_alg 'cbc(aes)' = 0
541[ 2.053622] crypto_register_alg 'ctr(aes)' = 0
542[ 2.056306] crypto_register_alg 'xts(aes)' = 0
543[ 2.059520] usbcore: registered new interface driver usbhid
544[ 2.059540] usbhid: USB HID core driver
545[ 2.060917] NET: Registered protocol family 10
546[ 2.061819] Segment Routing with IPv6
547[ 2.061849] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver
548[ 2.062079] NET: Registered protocol family 17
549[ 2.062103] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this.
550[ 2.062270] Key type dns_resolver registered
551[ 2.062333] drmem: No dynamic reconfiguration memory found
552[ 2.062593] registered taskstats version 1
553[ 2.062623] AppArmor: AppArmor sha1 policy hashing enabled
554[ 2.062805] printk: console [netcon0] enabled
555[ 2.062822] netconsole: network logging started
556[ 2.087055] rtc-opal opal-rtc: setting system clock to 2019-09-18T15:28:38 UTC (1568820518)
557[ 2.089423] Freeing unused kernel memory: 3684K
558[ 2.089443] This architecture does not have kernel memory protection.
559[ 2.089456] Run /init as init process
560Loading, please wait...
561Starting version 241
562[ 2.229280] synth uevent: /devices/vio: failed to send uevent
563[ 2.229299] vio vio: uevent: failed to send synthetic uevent
564[ 2.230134] tg3 0004:01:00.1 enP4p1s0f1: renamed from eth1
565[ 2.230440] megasas: 07.707.51.00-rc1
566[ 2.230500] megaraid_sas 0001:01:00.0: enabling device (0140 -> 0142)
567[ 2.231270] megaraid_sas 0001:01:00.0: Waiting for FW to come to ready state
568[ 2.231695] Microsemi PQI Driver (v1.2.6-015)
569[ 2.232304] smartpqi 0033:01:00.0: Microsemi Smart Family Controller found
570[ 2.232354] smartpqi 0033:01:00.0: enabling device (0540 -> 0542)
571[ 2.237455] tg3 0004:01:00.0 enP4p1s0f0: renamed from eth0
572[ 2.253198] megaraid_sas 0001:01:00.0: FW now in Ready state
573[ 2.253224] megaraid_sas 0001:01:00.0: 63 bit DMA mask and 32 bit consistent mask
574[ 2.255050] megaraid_sas 0001:01:00.0: firmware supports msix : (96)
575[ 2.255063] megaraid_sas 0001:01:00.0: current msix/online cpus : (96/144)
576[ 2.255073] megaraid_sas 0001:01:00.0: RDPQ mode : (disabled)
577[ 2.255109] megaraid_sas 0001:01:00.0: Current firmware supports maximum commands: 928 LDIO threshold: 0
578[ 2.255641] megaraid_sas 0001:01:00.0: Configured max firmware commands: 927
579[ 2.258424] megaraid_sas 0001:01:00.0: FW supports sync cache : Yes
580[ 2.303599] megaraid_sas 0001:01:00.0: FW provided supportMaxExtLDs: 1 max_lds: 64
581[ 2.303617] megaraid_sas 0001:01:00.0: controller type : MR(2048MB)
582[ 2.303629] megaraid_sas 0001:01:00.0: Online Controller Reset(OCR) : Enabled
583[ 2.303651] megaraid_sas 0001:01:00.0: Secure JBOD support : Yes
584[ 2.303663] megaraid_sas 0001:01:00.0: NVMe passthru support : No
585[ 2.303684] megaraid_sas 0001:01:00.0: FW provided TM TaskAbort/Reset timeout : 0 secs/0 secs
586[ 2.311201] usb 1-3: new high-speed USB device number 2 using xhci_hcd
587[ 2.327836] megaraid_sas 0001:01:00.0: INIT adapter done
588[ 2.332073] megaraid_sas 0001:01:00.0: pci id : (0x1000)/(0x00ce)/(0x1000)/(0x9371)
589[ 2.332096] megaraid_sas 0001:01:00.0: unevenspan support : no
590[ 2.332117] megaraid_sas 0001:01:00.0: firmware crash dump : yes
591[ 2.332128] megaraid_sas 0001:01:00.0: jbod sync map : yes
592[ 2.333747] scsi host0: Avago SAS based MegaRAID driver
593[ 2.337263] scsi 0:0:9:0: Direct-Access SEAGATE ST12000NM0027 E001 PQ: 0 ANSI: 6
594[ 2.340320] sd 0:0:9:0: Attached scsi generic sg0 type 0
595[ 2.347119] sd 0:0:9:0: [sda] 23437770752 512-byte logical blocks: (12.0 TB/10.9 TiB)
596[ 2.347140] sd 0:0:9:0: [sda] 4096-byte physical blocks
597[ 2.349561] sd 0:0:9:0: [sda] Write Protect is off
598[ 2.354265] sd 0:0:9:0: [sda] Write cache: enabled, read cache: enabled, supports DPO and FUA
599[ 2.382216] sda: sda1
600[ 2.444660] usb 1-3: New USB device found, idVendor=1d6b, idProduct=0107, bcdDevice= 1.00
601[ 2.444684] usb 1-3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
602[ 2.444699] usb 1-3: Product: USB Virtual Hub
603[ 2.444720] usb 1-3: Manufacturer: Aspeed
604[ 2.444729] usb 1-3: SerialNumber: 00000000
605[ 2.457181] hub 1-3:1.0: USB hub found
606[ 2.457909] hub 1-3:1.0: 5 ports detected
607[ 2.577201] usb 1-4: new high-speed USB device number 3 using xhci_hcd
608[ 2.709891] usb 1-4: New USB device found, idVendor=05e3, idProduct=0610, bcdDevice=32.98
609[ 2.709912] usb 1-4: New USB device strings: Mfr=0, Product=1, SerialNumber=0
610[ 2.709936] usb 1-4: Product: USB2.0 Hub
611[ 2.720929] hub 1-4:1.0: USB hub found
612[ 2.721773] hub 1-4:1.0: 4 ports detected
613[ 2.771204] usb 1-3.1: new high-speed USB device number 4 using xhci_hcd
614[ 2.857624] usb 1-3.1: New USB device found, idVendor=1d6b, idProduct=0104, bcdDevice= 1.00
615[ 2.857644] usb 1-3.1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
616[ 2.857668] usb 1-3.1: Product: virtual_input
617[ 2.857679] usb 1-3.1: Manufacturer: OpenBMC
618[ 2.857690] usb 1-3.1: SerialNumber: OBMC0001
619[ 2.900212] smartpqi 0033:01:00.0: Online Firmware Activation not supported by controller
620[ 2.900240] smartpqi 0033:01:00.0: Serial Management Protocol not supported by controller
621[ 2.900257] smartpqi 0033:01:00.0: New Soft Reset Handshake not supported by controller
622[ 2.906361] scsi host1: smartpqi
623[ 2.908020] input: OpenBMC virtual_input as /devices/pci0003:00/0003:00:00.0/0003:01:00.0/usb1/1-3/1-3.1/1-3.1:1.0/0003:1D6B:0104.0001/input/input0
624[ 2.959900] hid-generic 0003:1D6B:0104.0001: input: USB HID v1.01 Keyboard [OpenBMC virtual_input] on usb-0003:01:00.0-3.1/input0
625[ 2.964368] input: OpenBMC virtual_input as /devices/pci0003:00/0003:00:00.0/0003:01:00.0/usb1/1-3/1-3.1/1-3.1:1.1/0003:1D6B:0104.0002/input/input1
626[ 2.964506] hid-generic 0003:1D6B:0104.0002: input: USB HID v1.01 Mouse [OpenBMC virtual_input] on usb-0003:01:00.0-3.1/input1
627[ 2.982587] sd 0:0:9:0: [sda] Attached SCSI disk
628[ 2.993049] smartpqi 0033:01:00.0: added 1:0:-:- 30000d1703d93300 Direct-Access ATA Samsung SSD 860 AIO+ qd=27
629[ 2.997298] scsi 1:0:0:0: Direct-Access ATA Samsung SSD 860 1B6Q PQ: 0 ANSI: 6
630[ 3.002472] sd 1:0:0:0: Attached scsi generic sg1 type 0
631[ 3.003737] smartpqi 0033:01:00.0: added 1:0:-:- 30000d1703d93302 Direct-Access ATA Samsung SSD 860 AIO+ qd=27
632[ 3.005985] sd 1:0:0:0: [sdb] Spinning up disk...
633[ 3.008099] scsi 1:0:1:0: Direct-Access ATA Samsung SSD 860 1B6Q PQ: 0 ANSI: 6
634[ 3.012491] sd 1:0:1:0: Attached scsi generic sg2 type 0
635[ 3.013151] smartpqi 0033:01:00.0: added 1:0:-:- 30000d1703d93301 Direct-Access ATA Samsung SSD 860 AIO+ qd=27
636[ 3.015881] sd 1:0:1:0: [sdc] Spinning up disk...
637[ 3.016894] scsi 1:0:2:0: Direct-Access ATA Samsung SSD 860 1B6Q PQ: 0 ANSI: 6
638[ 3.021414] sd 1:0:2:0: Attached scsi generic sg3 type 0
639[ 3.022594] smartpqi 0033:01:00.0: added 1:0:-:- 30000d1703d93303 Direct-Access ATA Samsung SSD 860 AIO+ qd=27
640[ 3.024485] sd 1:0:2:0: [sdd] Spinning up disk...
641[ 3.025130] scsi 1:0:3:0: Direct-Access ATA Samsung SSD 860 1B6Q PQ: 0 ANSI: 6
642[ 3.030062] sd 1:0:3:0: Attached scsi generic sg4 type 0
643[ 3.030773] smartpqi 0033:01:00.0: added 1:0:-:- 50000d1703d93300 Enclosure MSCC Smart Adapter AIO-
644[ 3.033197] sd 1:0:3:0: [sde] Spinning up disk...
645[ 3.034293] scsi 1:0:4:0: Enclosure MSCC Smart Adapter 1.32 PQ: 0 ANSI: 5
646[ 3.038731] scsi 1:0:4:0: Attached scsi generic sg5 type 13
647[ 3.039914] smartpqi 0033:01:00.0: added 1:2:0:0 0000000000000000 RAID MSCC 1100-4i
648[ 3.043247] scsi 1:2:0:0: RAID MSCC 1100-4i 1.32 PQ: 0 ANSI: 5
649[ 3.047148] scsi 1:2:0:0: Attached scsi generic sg6 type 12
650[ 4.028728] .
651[ 4.028730] .
652[ 4.028733] .
653[ 4.029871] ready
654[ 4.029871] ready
655[ 4.031161] ready
656[ 4.037844] sd 1:0:1:0: [sdc] 4000797360 512-byte logical blocks: (2.05 TB/1.86 TiB)
657[ 4.037845] sd 1:0:0:0: [sdb] 4000797360 512-byte logical blocks: (2.05 TB/1.86 TiB)
658[ 4.039069] sd 1:0:0:0: [sdb] Write Protect is off
659[ 4.039070] sd 1:0:1:0: [sdc] Write Protect is off
660[ 4.039073] sd 1:0:2:0: [sdd] 2000409264 512-byte logical blocks: (1.02 TB/954 GiB)
661[ 4.040323] sd 1:0:2:0: [sdd] Write Protect is off
662[ 4.041552] sd 1:0:1:0: [sdc] Write cache: enabled, read cache: enabled, supports DPO and FUA
663[ 4.041553] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, supports DPO and FUA
664[ 4.042686] sd 1:0:2:0: [sdd] Write cache: enabled, read cache: enabled, supports DPO and FUA
665[ 4.068976] sdc: sdc1 sdc2 sdc3 sdc4
666[ 4.068978] sdb: sdb1 sdb2 sdb3 sdb4
667[ 4.069623] sdd: sdd1
668[ 4.088898] Oops: Machine check, sig: 7 [#1]
669[ 4.088930] LE PAGE_SIZE=4K MMU=Hash SMP NR_CPUS=144 NUMA PowerNV
670[ 4.088963] Modules linked in: smartpqi megaraid_sas(+)
671[ 4.088980] CPU: 73 PID: 0 Comm: swapper/73 Tainted: G M 5.2.15-4k-pages-dirty #3
672[ 4.089010] NIP: c0000000012a3900 LR: c000000000035ae8 CTR: c000003fff7ab47c
673[ 4.089048] REGS: c000003fff7ab0b0 TRAP: c000000000f20d60 Tainted: G M (5.2.15-4k-pages-dirty)
674[ 4.089110] MSR: c000003fff7ab590 <SF,VEC,EE,FP,ME,SE,DR,TM[TSE]> CR: ffffffffffffffff XER: c0003d0000b22d60
675[ 4.089147] CFAR: 0000000000000000 IRQMASK: c000000000f20d68
676[ 4.089147] PACATMSCRATCH: 9000000000009033
677[ 4.089147] GPR00: 00000000f3b60e0a 00000000f3b75d62 0000000000000000 c000203ff42efac0
678[ 4.089147] GPR04: c000003fff7ab590 c000003fff7ab1a0 c000003fff7ab100 0000000048044228
679[ 4.089147] GPR08: c00000000008ccd0 c0000000012a3900 c000003fff7ab130 0000000000000000
680[ 4.089147] GPR12: c000000000035d68 c0000000012a3900 0000000000000000 c000003fff7ab590
681[ 4.089147] GPR16: c000003fff7ab430 0000000000000000 c000000000008400 0000000000000000
682[ 4.089147] GPR20: 0000000000000000 0000000000000000 0000000000000000 0000000000000000
683[ 4.089147] GPR24: 0000000000000000 0000000000000000 0000000000000000 0000000000000000
684[ 4.089147] GPR28: 7265677368657265 0000000000000000 c0000000000369a0 c000003fff7ab430
685[ 4.089452] NIP [c0000000012a3900] 0xc0000000012a3900
686[ 4.089468] LR [c000000000035ae8] save_mce_event+0x28/0x170
687[ 4.089514] Call Trace:
688[ 4.089532] Instruction dump:
689[ 4.089553] XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX
690[ 4.089580] XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX
691[ 4.089620] ---[ end trace 64f6c451ebae9833 ]---
692[ 4.091495] sd 1:0:1:0: [sdc] Attached SCSI disk
693[ 4.091497] sd 1:0:0:0: [sdb] Attached SCSI disk
694[ 4.138708] md/raid1:md0: active with 2 out of 2 mirrors
695[ 4.138757] md0: detected capacity change from 0 to 8580497408
696[ 4.612372]
697[ 4.612431] Disabling lock debugging due to kernel taint
698[ 5.612473] Kernel panic - not syncing: Aiee, killing interrupt handler!
699[ [ 190.323788708,5] OPAL: Reboot request...
700[ 190.324008769,5] RESET: Initiating fast reboot 1...
701 7.610995] Rebooting in 10 seconds..