· 9 years ago · Aug 10, 2017, 03:10 AM
1<6>[ 0.000000 / 01-01 00:00:00.000][0] Booting Linux on physical CPU 0x100
2<6>[ 0.000000 / 01-01 00:00:00.000][0] Initializing cgroup subsys cpu
3<6>[ 0.000000 / 01-01 00:00:00.000][0] Initializing cgroup subsys cpuacct
4<5>[ 0.000000 / 01-01 00:00:00.000][0] Linux version 3.18.31-perf (messi2050@messi2050) (gcc version 4.8 (GCC) ) #1 SMP PREEMPT Sat Aug 5 04:40:50 EET 2017
5<6>[ 0.000000 / 01-01 00:00:00.000][0] CPU: ARMv7 Processor [410fd034] revision 4 (ARMv7), cr=10c0383d
6<6>[ 0.000000 / 01-01 00:00:00.000][0] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
7<6>[ 0.000000 / 01-01 00:00:00.000][0] Machine model: Qualcomm Technologies, Inc. MSM8937-PMI8950 MTP
8<6>[ 0.000000 / 01-01 00:00:00.000][0] Reserved memory: reserved region for node 'other_ext_region@0': base 0x85500000, size 19 MiB
9<6>[ 0.000000 / 01-01 00:00:00.000][0] Reserved memory: reserved region for node 'modem_region@0': base 0x86800000, size 82 MiB
10<6>[ 0.000000 / 01-01 00:00:00.000][0] Reserved memory: reserved region for node 'adsp_fw_region@0': base 0x8ba00000, size 17 MiB
11<6>[ 0.000000 / 01-01 00:00:00.000][0] Reserved memory: reserved region for node 'wcnss_fw_region@0': base 0x8cb00000, size 7 MiB
12<6>[ 0.000000 / 01-01 00:00:00.000][0] Reserved memory: reserved region for node 'splash_region@83000000': base 0x90000000, size 20 MiB
13<6>[ 0.000000 / 01-01 00:00:00.000][0] Reserved memory: reserved region for node 'ramoops_region@AFF00000': base 0xaff00000, size 1 MiB
14<6>[ 0.000000 / 01-01 00:00:00.000][0] Reserved memory: reserved region for node 'crash_fb_mem@AFB00000': base 0xafb00000, size 4 MiB
15<6>[ 0.000000 / 01-01 00:00:00.000][0] Removed memory: created DMA memory pool at 0x85500000, size 19 MiB
16<6>[ 0.000000 / 01-01 00:00:00.000][0] Reserved memory: initialized node other_ext_region@0, compatible id removed-dma-pool
17<6>[ 0.000000 / 01-01 00:00:00.000][0] Removed memory: created DMA memory pool at 0x86800000, size 82 MiB
18<6>[ 0.000000 / 01-01 00:00:00.000][0] Reserved memory: initialized node modem_region@0, compatible id removed-dma-pool
19<6>[ 0.000000 / 01-01 00:00:00.000][0] Removed memory: created DMA memory pool at 0x8ba00000, size 17 MiB
20<6>[ 0.000000 / 01-01 00:00:00.000][0] Reserved memory: initialized node adsp_fw_region@0, compatible id removed-dma-pool
21<6>[ 0.000000 / 01-01 00:00:00.000][0] Removed memory: created DMA memory pool at 0x8cb00000, size 7 MiB
22<6>[ 0.000000 / 01-01 00:00:00.000][0] Reserved memory: initialized node wcnss_fw_region@0, compatible id removed-dma-pool
23<6>[ 0.000000 / 01-01 00:00:00.000][0] Reserved memory: allocated memory for 'venus_region@0' node: base 0x8f000000, size 16 MiB
24<6>[ 0.000000 / 01-01 00:00:00.000][0] Reserved memory: created CMA memory pool at 0x8f000000, size 16 MiB
25<6>[ 0.000000 / 01-01 00:00:00.000][0] Reserved memory: initialized node venus_region@0, compatible id shared-dma-pool
26<6>[ 0.000000 / 01-01 00:00:00.000][0] Reserved memory: allocated memory for 'qseecom_region@0' node: base 0xfec00000, size 16 MiB
27<6>[ 0.000000 / 01-01 00:00:00.000][0] Reserved memory: created CMA memory pool at 0xfec00000, size 16 MiB
28<6>[ 0.000000 / 01-01 00:00:00.000][0] Reserved memory: initialized node qseecom_region@0, compatible id shared-dma-pool
29<6>[ 0.000000 / 01-01 00:00:00.000][0] Reserved memory: allocated memory for 'adsp_region@0' node: base 0xfe800000, size 4 MiB
30<6>[ 0.000000 / 01-01 00:00:00.000][0] Reserved memory: created CMA memory pool at 0xfe800000, size 4 MiB
31<6>[ 0.000000 / 01-01 00:00:00.000][0] Reserved memory: initialized node adsp_region@0, compatible id shared-dma-pool
32<6>[ 0.000000 / 01-01 00:00:00.000][0] Removed memory: created DMA memory pool at 0xaff00000, size 1 MiB
33<6>[ 0.000000 / 01-01 00:00:00.000][0] Reserved memory: initialized node ramoops_region@AFF00000, compatible id removed-dma-pool
34<6>[ 0.000000 / 01-01 00:00:00.000][0] cma: Reserved 16 MiB at 0xfd800000
35<6>[ 0.000000 / 01-01 00:00:00.000][0] Memory policy: Data cache writealloc
36<7>[ 0.000000 / 01-01 00:00:00.000][0] On node 0 totalpages: 513023
37<7>[ 0.000000 / 01-01 00:00:00.000][0] free_area_init_node: node 0, pgdat c1726680, node_mem_map ee7c8000
38<7>[ 0.000000 / 01-01 00:00:00.000][0] Normal zone: 1520 pages used for memmap
39<7>[ 0.000000 / 01-01 00:00:00.000][0] Normal zone: 0 pages reserved
40<7>[ 0.000000 / 01-01 00:00:00.000][0] Normal zone: 183552 pages, LIFO batch:31
41<7>[ 0.000000 / 01-01 00:00:00.000][0] HighMem zone: 2576 pages used for memmap
42<7>[ 0.000000 / 01-01 00:00:00.000][0] HighMem zone: 329471 pages, LIFO batch:31
43<6>[ 0.000000 / 01-01 00:00:00.000][0] psci: probing for conduit method from DT.
44<6>[ 0.000000 / 01-01 00:00:00.000][0] psci: PSCIv1.0 detected in firmware.
45<6>[ 0.000000 / 01-01 00:00:00.000][0] psci: Using standard PSCI v0.2 function IDs
46<6>[ 0.000000 / 01-01 00:00:00.000][0] PERCPU: Embedded 11 pages/cpu @ee6c9000 s14464 r8192 d22400 u45056
47<7>[ 0.000000 / 01-01 00:00:00.000][0] pcpu-alloc: s14464 r8192 d22400 u45056 alloc=11*4096
48<7>[ 0.000000 / 01-01 00:00:00.000][0] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 [0] 4 [0] 5 [0] 6 [0] 7
49<4>[ 0.000000 / 01-01 00:00:00.000][0] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 511503
50<6>[ 0.000000 / 01-01 00:00:00.000][0] BOARD: LGE rev_10
51<6>[ 0.000000 / 01-01 00:00:00.000][0] LGE BOOT REASON: 0x5cebfcde
52<6>[ 0.000000 / 01-01 00:00:00.000][0] lge_set_panel_type: panel type = 3
53<6>[ 0.000000 / 01-01 00:00:00.000][0] [Touch] LGE RECOVERY BOOT: 1
54<6>[ 0.000000 / 01-01 00:00:00.000][0] vdd_always_on=1
55<6>[ 0.000000 / 01-01 00:00:00.000][0] PID hash table entries: 4096 (order: 2, 16384 bytes)
56<6>[ 0.000000 / 01-01 00:00:00.000][0] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
57<6>[ 0.000000 / 01-01 00:00:00.000][0] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
58<4>[ 0.000000 / 01-01 00:00:00.000][0] Memory: 1841236K/2052092K available (13695K kernel code, 1230K rwdata, 6432K rodata, 474K init, 2887K bss, 210856K reserved, 1276924K highmem)
59<5>[ 0.000000 / 01-01 00:00:00.000][0] Virtual kernel memory layout:
60<5>[ 0.000000 / 01-01 00:00:00.000][0] vector : 0xffff0000 - 0xffff1000 ( 4 kB)
61<5>[ 0.000000 / 01-01 00:00:00.000][0] fixmap : 0xffc00000 - 0xfff00000 (3072 kB)
62<5>[ 0.000000 / 01-01 00:00:00.000][0] vmalloc : 0xf0000000 - 0xff000000 ( 240 MB)
63<5>[ 0.000000 / 01-01 00:00:00.000][0] lowmem : 0xc0000000 - 0xef800000 ( 760 MB)
64<5>[ 0.000000 / 01-01 00:00:00.000][0] pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB)
65<5>[ 0.000000 / 01-01 00:00:00.000][0] modules : 0xbf000000 - 0xbfe00000 ( 14 MB)
66<5>[ 0.000000 / 01-01 00:00:00.000][0] .text : 0xc0008000 - 0xc14a7c84 (21120 kB)
67<5>[ 0.000000 / 01-01 00:00:00.000][0] .init : 0xc1500000 - 0xc1576880 ( 475 kB)
68<5>[ 0.000000 / 01-01 00:00:00.000][0] .data : 0xc1600000 - 0xc1733af8 (1231 kB)
69<5>[ 0.000000 / 01-01 00:00:00.000][0] .bss : 0xc1733bbc - 0xc1a05b60 (2888 kB)
70<6>[ 0.000000 / 01-01 00:00:00.000][0] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
71<6>[ 0.000000 / 01-01 00:00:00.000][0] HMP scheduling enabled.
72<6>[ 0.000000 / 01-01 00:00:00.000][0] Preemptible hierarchical RCU implementation.
73<6>[ 0.000000 / 01-01 00:00:00.000][0] RCU dyntick-idle grace-period acceleration is enabled.
74<6>[ 0.000000 / 01-01 00:00:00.000][0] NR_IRQS:16 nr_irqs:16 16
75<4>[ 0.000000 / 01-01 00:00:00.000][0] mpm_init_irq_domain(): Cannot find irq controller for qcom,gpio-parent
76<3>[ 0.000000 / 01-01 00:00:00.000][0] MPM 1 irq mapping errored -517
77<6>[ 0.000000 / 01-01 00:00:00.000][0] Offload RCU callbacks from all CPUs
78<6>[ 0.000000 / 01-01 00:00:00.000][0] Offload RCU callbacks from CPUs: 0-7.
79<6>[ 0.000000 / 01-01 00:00:00.000][0] Architected cp15 and mmio timer(s) running at 19.20MHz (virt/virt).
80<6>[ 0.000006 / 01-01 00:00:00.000][0] sched_clock: 56 bits at 19MHz, resolution 52ns, wraps every 3579139424256ns
81<6>[ 0.000024 / 01-01 00:00:00.000][0] Switching to timer-based delay loop, resolution 52ns
82<6>[ 0.000045 / 01-01 00:00:00.000][0] Switched to clocksource arch_sys_counter
83<6>[ 0.000728 / 01-01 00:00:00.000][0] Calibrating delay loop (skipped), value calculated using timer frequency.. 38.40 BogoMIPS (lpj=192000)
84<6>[ 0.000745 / 01-01 00:00:00.000][0] pid_max: default: 32768 minimum: 301
85<6>[ 0.000831 / 01-01 00:00:00.000][0] Security Framework initialized
86<6>[ 0.000851 / 01-01 00:00:00.000][0] SELinux: Initializing.
87<7>[ 0.000883 / 01-01 00:00:00.000][0] SELinux: Starting in permissive mode
88<6>[ 0.000925 / 01-01 00:00:00.000][0] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes)
89<6>[ 0.000942 / 01-01 00:00:00.000][0] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes)
90<6>[ 0.001597 / 01-01 00:00:00.000][0] Initializing cgroup subsys freezer
91<6>[ 0.001630 / 01-01 00:00:00.000][0] CPU: Testing write buffer coherency: ok
92<6>[ 0.002218 / 01-01 00:00:00.000][0] Setting up static identity map for 0x80d8d590 - 0x80d8d5e8
93<4>[ 0.011596 / 01-01 00:00:00.000][0]
94<4>[ 0.011596 / 01-01 00:00:00.000][0] **********************************************************
95<4>[ 0.011620 / 01-01 00:00:00.000][0] ** NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE **
96<4>[ 0.011633 / 01-01 00:00:00.000][0] ** **
97<4>[ 0.011646 / 01-01 00:00:00.000][0] ** trace_printk() being used. Allocating extra memory. **
98<4>[ 0.011658 / 01-01 00:00:00.000][0] ** **
99<4>[ 0.011671 / 01-01 00:00:00.000][0] ** This means that this is a DEBUG kernel and it is **
100<4>[ 0.011683 / 01-01 00:00:00.000][0] ** unsafe for produciton use. **
101<4>[ 0.011696 / 01-01 00:00:00.000][0] ** **
102<4>[ 0.011709 / 01-01 00:00:00.000][0] ** If you see this message and you are not debugging **
103<4>[ 0.011721 / 01-01 00:00:00.000][0] ** the kernel, report this immediately to your vendor! **
104<4>[ 0.011733 / 01-01 00:00:00.000][0] ** **
105<4>[ 0.011746 / 01-01 00:00:00.000][0] ** NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE **
106<4>[ 0.011758 / 01-01 00:00:00.000][0] **********************************************************
107<6>[ 0.012668 / 01-01 00:00:00.000][0] MSM Memory Dump base table set up
108<6>[ 0.012697 / 01-01 00:00:00.000][0] MSM Memory Dump apps data table set up
109<6>[ 0.012764 / 01-01 00:00:00.000][0] Configuring XPU violations to be fatal errors
110<6>[ 0.013602 / 01-01 00:00:00.000][0] panic-handler: reserved[@0xafb00000+@0x400000)
111<6>[ 0.014040 / 01-01 00:00:00.000][0] mem-address=0xaff00000
112<6>[ 0.014053 / 01-01 00:00:00.000][0] mem-size=0x80000
113<6>[ 0.015569 / 01-01 00:00:00.000][0] cpu_clock_a53_init_little: A53 Power clocks configured
114<4>[ 0.018492 / 01-01 00:00:00.000][1] CPU1: Booted secondary processor
115<4>[ 0.019778 / 01-01 00:00:00.000][2] CPU2: Booted secondary processor
116<4>[ 0.021246 / 01-01 00:00:00.019][3] CPU3: Booted secondary processor
117<4>[ 0.022867 / 01-01 00:00:00.019][4] CPU4: Booted secondary processor
118<4>[ 0.024425 / 01-01 00:00:00.019][5] CPU5: Booted secondary processor
119<4>[ 0.026005 / 01-01 00:00:00.019][6] CPU6: Booted secondary processor
120<4>[ 0.027623 / 01-01 00:00:00.019][7] CPU7: Booted secondary processor
121<6>[ 0.027781 / 01-01 00:00:00.019][1] Brought up 8 CPUs
122<6>[ 0.027872 / 01-01 00:00:00.019][1] SMP: Total of 8 processors activated (307.20 BogoMIPS).
123<6>[ 0.027885 / 01-01 00:00:00.019][1] CPU: All CPU(s) started in SVC mode.
124<6>[ 0.036226 / 01-01 00:00:00.029][2] VFP support v0.3: implementor 41 architecture 3 part 40 variant 3 rev 4
125<6>[ 0.039808 / 01-01 00:00:00.029][1] pinctrl core: initialized pinctrl subsystem
126<6>[ 0.040194 / 01-01 00:00:00.039][1] regulator-dummy: no parameters
127<6>[ 0.096146 / 01-01 00:00:00.089][1] NET: Registered protocol family 16
128<6>[ 0.101643 / 01-01 00:00:00.099][1] DMA: preallocated 256 KiB pool for atomic coherent allocations
129<4>[ 0.102353 / 01-01 00:00:00.099][1] msm_pm_tz_boot_init: set warmboot address failed
130<3>[ 0.102428 / 01-01 00:00:00.099][1] scm_call failed: func id 0x2000101, ret: -1, syscall returns: 0x0, 0x0, 0x0
131<6>[ 0.120129 / 01-01 00:00:00.119][1] cpuidle: using governor ladder
132<6>[ 0.140123 / 01-01 00:00:00.139][1] cpuidle: using governor menu
133<6>[ 0.160123 / 01-01 00:00:00.159][1] cpuidle: using governor qcom
134<6>[ 0.186106 / 01-01 00:00:00.179][1] msm_watchdog b017000.qcom,wdt: wdog absent resource not present
135<6>[ 0.186488 / 01-01 00:00:00.179][2] msm_watchdog b017000.qcom,wdt: MSM Watchdog Initialized
136<6>[ 0.189652 / 01-01 00:00:00.179][2] platform soc:qcom,adsprpc-mem: assigned reserved memory node adsp_region@0
137<4>[ 0.191880 / 01-01 00:00:00.189][2] irq: no irq domain found for /soc/pinctrl@1000000 !
138<3>[ 0.192350 / 01-01 00:00:00.189][2] spmi_pmic_arb 200f000.qcom,spmi: PMIC Arb Version-2 0x20010000
139<6>[ 0.199608 / 01-01 00:00:00.189][2] platform 4080000.qcom,mss: assigned reserved memory node modem_region@0
140<6>[ 0.200079 / 01-01 00:00:00.199][2] platform c200000.qcom,lpass: assigned reserved memory node adsp_fw_region@0
141<6>[ 0.200442 / 01-01 00:00:00.199][2] platform a21b000.qcom,pronto: assigned reserved memory node wcnss_fw_region@0
142<6>[ 0.200648 / 01-01 00:00:00.199][2] platform 1de0000.qcom,venus: assigned reserved memory node venus_region@0
143<6>[ 0.201510 / 01-01 00:00:00.199][2] mem_acc_corner: 0 <--> 0 mV at 0 mV
144<6>[ 0.211938 / 01-01 00:00:00.209][2] console [pstore-1] enabled
145<6>[ 0.211954 / 01-01 00:00:00.209][2] pstore: Registered ramoops as persistent store backend
146<6>[ 0.211972 / 01-01 00:00:00.209][2] ramoops: attached 0x80000@0xaff00000, ecc: 0/0
147<4>[ 0.212581 / 01-01 00:00:00.209][2] irq: no irq domain found for /soc/pinctrl@1000000 !
148<6>[ 0.213692 / 01-01 00:00:00.209][2] hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers.
149<6>[ 0.213710 / 01-01 00:00:00.209][2] hw-breakpoint: maximum watchpoint size is 8 bytes.
150<4>[ 0.215927 / 01-01 00:00:00.209][2] __of_mpm_init(): MPM driver mapping exists
151<4>[ 0.216913 / 01-01 00:00:00.209][2] msm_rpm_glink_dt_parse: qcom,rpm-glink compatible not matches
152<6>[ 0.216931 / 01-01 00:00:00.209][2] msm_rpm_dev_probe: APSS-RPM communication over SMD
153<6>[ 0.216948 / 01-01 00:00:00.209][2] smd_open() before smd_init()
154<3>[ 0.218185 / 01-01 00:00:00.209][2] msm_mpm_dev_probe(): Cannot get clk resource for XO: -517
155<3>[ 0.222030 / 01-01 00:00:00.219][1] smd_channel_probe_now: allocation table not initialized
156<3>[ 0.222167 / 01-01 00:00:00.219][1] smd_channel_probe_now: allocation table not initialized
157<3>[ 0.222302 / 01-01 00:00:00.219][1] smd_channel_probe_now: allocation table not initialized
158<6>[ 0.227222 / 01-01 00:00:00.219][1] pm8937_s5: 1050 <--> 1350 mV at 1225 mV normal idle
159<6>[ 0.227370 / 01-01 00:00:00.219][1] spm_regulator_probe: name=pm8937_s5, range=LV, voltage=1225000 uV, mode=AUTO, step rate=1200 uV/us
160<6>[ 0.227907 / 01-01 00:00:00.219][1] cpr_efuse_init: apc_corner: efuse_addr = 0x000a4000 (len=0x1000)
161<6>[ 0.227954 / 01-01 00:00:00.219][1] cpr_read_fuse_revision: apc_corner: fuse revision = 2
162<6>[ 0.227980 / 01-01 00:00:00.219][1] cpr_parse_speed_bin_fuse: apc_corner: [row: 37]: 0xa830c021003ba631, speed_bits = 0
163<6>[ 0.228094 / 01-01 00:00:00.219][1] cpr_adjust_init_voltages: apc_corner: adjusted initial voltage[1]: 1075000 -> 1110000 uV
164<6>[ 0.228117 / 01-01 00:00:00.219][1] cpr_adjust_init_voltages: apc_corner: adjusted initial voltage[2]: 1115000 -> 1155000 uV
165<6>[ 0.228140 / 01-01 00:00:00.219][1] cpr_adjust_init_voltages: apc_corner: adjusted initial voltage[3]: 1200000 -> 1220000 uV
166<6>[ 0.228162 / 01-01 00:00:00.219][1] cpr_pvs_init: apc_corner: pvs voltage: [1110000 1155000 1220000] uV
167<6>[ 0.228181 / 01-01 00:00:00.219][1] cpr_pvs_init: apc_corner: ceiling voltage: [1155000 1225000 1350000] uV
168<6>[ 0.228200 / 01-01 00:00:00.219][1] cpr_pvs_init: apc_corner: floor voltage: [1050000 1050000 1090000] uV
169<6>[ 0.228351 / 01-01 00:00:00.219][1] cpr_init_cpr_parameters: apc_corner: up threshold = 2, down threshold = 4
170<6>[ 0.228389 / 01-01 00:00:00.219][1] cpr_init_cpr_parameters: apc_corner: CPR is enabled by default.
171<6>[ 0.228429 / 01-01 00:00:00.219][1] cpr_init_cpr_efuse: apc_corner: [row:67] = 0x248e1283cbad19af
172<6>[ 0.228463 / 01-01 00:00:00.219][1] cpr_init_cpr_efuse: apc_corner: Corner[1]: ro_sel = 2, target quot = 900
173<6>[ 0.228484 / 01-01 00:00:00.219][1] cpr_init_cpr_efuse: apc_corner: Corner[2]: ro_sel = 2, target quot = 971
174<6>[ 0.228508 / 01-01 00:00:00.219][1] cpr_init_cpr_efuse: apc_corner: Corner[3]: ro_sel = 2, target quot = 1126
175<6>[ 0.228547 / 01-01 00:00:00.219][1] cpr_adjust_target_quots: apc_corner: Corner[1]: adjusted target quot = 950
176<6>[ 0.228569 / 01-01 00:00:00.219][1] cpr_adjust_target_quots: apc_corner: Corner[2]: adjusted target quot = 981
177<6>[ 0.228591 / 01-01 00:00:00.219][1] cpr_adjust_target_quots: apc_corner: Corner[3]: adjusted target quot = 1146
178<6>[ 0.228691 / 01-01 00:00:00.219][1] cpr_get_corner_quot_adjustment: apc_corner: fuse corner 2 quotient adjustment scaling factor: 0.231
179<6>[ 0.228709 / 01-01 00:00:00.219][1] cpr_get_corner_quot_adjustment: apc_corner: fuse corner 3 quotient adjustment scaling factor: 0.537
180<6>[ 0.228732 / 01-01 00:00:00.219][1] cpr_get_corner_quot_adjustment: apc_corner: adjusted quotient[1] = 950
181<6>[ 0.228749 / 01-01 00:00:00.219][1] cpr_get_corner_quot_adjustment: apc_corner: adjusted quotient[2] = 981
182<6>[ 0.228765 / 01-01 00:00:00.219][1] cpr_get_corner_quot_adjustment: apc_corner: adjusted quotient[3] = 1043
183<6>[ 0.228782 / 01-01 00:00:00.219][1] cpr_get_corner_quot_adjustment: apc_corner: adjusted quotient[4] = 1064
184<6>[ 0.228799 / 01-01 00:00:00.219][1] cpr_get_corner_quot_adjustment: apc_corner: adjusted quotient[5] = 1116
185<6>[ 0.228815 / 01-01 00:00:00.219][1] cpr_get_corner_quot_adjustment: apc_corner: adjusted quotient[6] = 1146
186<6>[ 0.228832 / 01-01 00:00:00.219][1] cpr_get_corner_quot_adjustment: apc_corner: adjusted quotient[7] = 1146
187<6>[ 0.228984 / 01-01 00:00:00.219][1] cpr_config: apc_corner: Timer count: 0x17700 (for 5000 us)
188<6>[ 0.229301 / 01-01 00:00:00.219][1] apc_corner: 0 <--> 0 mV
189<6>[ 0.230035 / 01-01 00:00:00.219][1] i2c-msm-v2 78b6000.i2c: probing driver i2c-msm-v2
190<3>[ 0.230207 / 01-01 00:00:00.229][1] i2c-msm-v2 78b6000.i2c: error on clk_get(core_clk):-517
191<3>[ 0.230229 / 01-01 00:00:00.229][1] i2c-msm-v2 78b6000.i2c: error probe() failed with err:-517
192<6>[ 0.230366 / 01-01 00:00:00.229][1] i2c-msm-v2 78b7000.i2c: probing driver i2c-msm-v2
193<3>[ 0.230499 / 01-01 00:00:00.229][1] i2c-msm-v2 78b7000.i2c: error on clk_get(core_clk):-517
194<3>[ 0.230519 / 01-01 00:00:00.229][1] i2c-msm-v2 78b7000.i2c: error probe() failed with err:-517
195<6>[ 0.230668 / 01-01 00:00:00.229][1] i2c-msm-v2 7af5000.i2c: probing driver i2c-msm-v2
196<3>[ 0.230800 / 01-01 00:00:00.229][1] i2c-msm-v2 7af5000.i2c: error on clk_get(core_clk):-517
197<3>[ 0.230820 / 01-01 00:00:00.229][1] i2c-msm-v2 7af5000.i2c: error probe() failed with err:-517
198<6>[ 0.235830 / 01-01 00:00:00.229][1] msm_thermal:vdd_restriction_reg_init Defer regulator vdd-dig probe
199<3>[ 0.235849 / 01-01 00:00:00.229][1] msm_thermal:probe_vdd_rstr Err regulator init. err:-517. KTM continues.
200<6>[ 0.235872 / 01-01 00:00:00.229][1] msm-thermal soc:qcom,msm-thermal: probe_vdd_rstr:Failed reading node=/soc/qcom,msm-thermal, key=qcom,max-freq-level. err=-517. KTM continues
201<3>[ 0.235891 / 01-01 00:00:00.229][1] msm_thermal:msm_thermal_dev_probe Failed reading node=/soc/qcom,msm-thermal, key=qcom,online-hotplug-core. err:-517
202<6>[ 0.236759 / 01-01 00:00:00.229][1] sps:sps is ready.
203<6>[ 0.239059 / 01-01 00:00:00.229][1] cpu-clock-8939 b011050.qcom,cpu-clock-8939: No PVS version available. Defaulting to 0!
204<6>[ 0.239081 / 01-01 00:00:00.229][1] cpu-clock-8939 b011050.qcom,cpu-clock-8939: Speed bin: 0 PVS Version: 0
205<4>[ 0.241922 / 01-01 00:00:00.239][3] msm_rpm_glink_dt_parse: qcom,rpm-glink compatible not matches
206<6>[ 0.241942 / 01-01 00:00:00.239][3] msm_rpm_dev_probe: APSS-RPM communication over SMD
207<6>[ 0.242597 / 01-01 00:00:00.239][3] pm8937_s1: 1000 <--> 1225 mV at 1000 mV normal idle
208<6>[ 0.243224 / 01-01 00:00:00.239][3] pm8937_s2_level: 0 <--> 0 mV at 0 mV normal idle
209<6>[ 0.243672 / 01-01 00:00:00.239][3] pm8937_s2_floor_level: 0 <--> 0 mV at 0 mV normal idle
210<6>[ 0.244107 / 01-01 00:00:00.239][3] pm8937_s2_level_ao: 0 <--> 0 mV at 0 mV normal idle
211<6>[ 0.244698 / 01-01 00:00:00.239][3] pm8937_s3: 1300 mV normal idle
212<6>[ 0.245304 / 01-01 00:00:00.239][3] pm8937_s4: 2050 mV normal idle
213<6>[ 0.245894 / 01-01 00:00:00.239][3] pm8937_l2: 1200 mV normal idle
214<6>[ 0.246510 / 01-01 00:00:00.239][3] pm8937_l3_level_ao: 0 <--> 0 mV at 0 mV normal idle
215<6>[ 0.246964 / 01-01 00:00:00.239][3] pm8937_l3_level_so: 0 <--> 0 mV at 0 mV normal idle
216<6>[ 0.247562 / 01-01 00:00:00.239][3] pm8937_l5: 1800 mV normal idle
217<6>[ 0.248138 / 01-01 00:00:00.239][3] pm8937_l6: 1800 mV normal idle
218<6>[ 0.248693 / 01-01 00:00:00.239][3] pm8937_l7: 1800 mV normal idle
219<6>[ 0.249098 / 01-01 00:00:00.239][3] pm8937_l7_ao: 1800 mV normal idle
220<6>[ 0.249670 / 01-01 00:00:00.239][3] pm8937_l8: 2850 <--> 2900 mV at 2900 mV normal idle
221<6>[ 0.250271 / 01-01 00:00:00.249][3] pm8937_l9: 3000 <--> 3300 mV at 3000 mV normal idle
222<6>[ 0.250850 / 01-01 00:00:00.249][3] pm8937_l10: 2800 <--> 3000 mV at 2800 mV normal idle
223<6>[ 0.251430 / 01-01 00:00:00.249][3] pm8937_l11: 2950 mV normal idle
224<6>[ 0.251992 / 01-01 00:00:00.249][3] pm8937_l12: 1800 <--> 2950 mV at 1800 mV normal idle
225<6>[ 0.252587 / 01-01 00:00:00.249][3] pm8937_l13: 3075 mV normal idle
226<6>[ 0.253165 / 01-01 00:00:00.249][3] pm8937_l14: 1800 <--> 3300 mV at 1800 mV normal idle
227<6>[ 0.253747 / 01-01 00:00:00.249][3] pm8937_l15: 1800 <--> 3300 mV at 1800 mV normal idle
228<6>[ 0.254339 / 01-01 00:00:00.249][3] pm8937_l16: 1800 mV normal idle
229<6>[ 0.254917 / 01-01 00:00:00.249][3] pm8937_l17: 2850 mV normal idle
230<6>[ 0.255513 / 01-01 00:00:00.249][3] pm8937_l19: 1225 <--> 1350 mV at 1225 mV normal idle
231<6>[ 0.256111 / 01-01 00:00:00.249][3] pm8937_l22: 2800 mV normal idle
232<6>[ 0.256703 / 01-01 00:00:00.249][3] pm8937_l23: 1200 mV normal idle
233<3>[ 0.257015 / 01-01 00:00:00.249][3] msm_mpm_dev_probe(): Cannot get clk resource for XO: -517
234<6>[ 0.257361 / 01-01 00:00:00.249][3] i2c-msm-v2 78b6000.i2c: probing driver i2c-msm-v2
235<3>[ 0.257512 / 01-01 00:00:00.249][3] i2c-msm-v2 78b6000.i2c: error on clk_get(core_clk):-517
236<3>[ 0.257534 / 01-01 00:00:00.249][3] i2c-msm-v2 78b6000.i2c: error probe() failed with err:-517
237<6>[ 0.257731 / 01-01 00:00:00.249][3] i2c-msm-v2 78b7000.i2c: probing driver i2c-msm-v2
238<3>[ 0.257865 / 01-01 00:00:00.249][3] i2c-msm-v2 78b7000.i2c: error on clk_get(core_clk):-517
239<3>[ 0.257886 / 01-01 00:00:00.249][3] i2c-msm-v2 78b7000.i2c: error probe() failed with err:-517
240<6>[ 0.258092 / 01-01 00:00:00.249][3] i2c-msm-v2 7af5000.i2c: probing driver i2c-msm-v2
241<3>[ 0.258226 / 01-01 00:00:00.249][3] i2c-msm-v2 7af5000.i2c: error on clk_get(core_clk):-517
242<3>[ 0.258246 / 01-01 00:00:00.249][3] i2c-msm-v2 7af5000.i2c: error probe() failed with err:-517
243<6>[ 0.259058 / 01-01 00:00:00.249][3] msm_thermal:sensor_mgr_init_threshold threshold id already initialized
244<3>[ 0.259459 / 01-01 00:00:00.249][3] cpu cpu0: dev_pm_opp_get_opp_count: device OPP not found (-19)
245<3>[ 0.259479 / 01-01 00:00:00.249][3] msm_thermal:get_cpu_freq_plan_len Error reading CPU0 freq table len. error:-19
246<3>[ 0.259500 / 01-01 00:00:00.249][3] cpu cpu4: dev_pm_opp_get_opp_count: device OPP not found (-19)
247<3>[ 0.259517 / 01-01 00:00:00.249][3] msm_thermal:get_cpu_freq_plan_len Error reading CPU4 freq table len. error:-19
248<6>[ 0.259533 / 01-01 00:00:00.249][3] msm_thermal:vdd_restriction_reg_init Defer vdd rstr freq init.
249<6>[ 0.261122 / 01-01 00:00:00.259][1] cpu-clock-8939 b011050.qcom,cpu-clock-8939: No PVS version available. Defaulting to 0!
250<6>[ 0.261145 / 01-01 00:00:00.259][1] cpu-clock-8939 b011050.qcom,cpu-clock-8939: Speed bin: 0 PVS Version: 0
251<3>[ 0.261630 / 01-01 00:00:00.259][3] cpu cpu0: dev_pm_opp_get_opp_count: device OPP not found (-19)
252<3>[ 0.261650 / 01-01 00:00:00.259][3] msm_thermal:get_cpu_freq_plan_len Error reading CPU0 freq table len. error:-19
253<3>[ 0.261669 / 01-01 00:00:00.259][3] cpu cpu4: dev_pm_opp_get_opp_count: device OPP not found (-19)
254<3>[ 0.261686 / 01-01 00:00:00.259][3] msm_thermal:get_cpu_freq_plan_len Error reading CPU4 freq table len. error:-19
255<3>[ 0.261706 / 01-01 00:00:00.259][3] cpu cpu0: dev_pm_opp_get_opp_count: device OPP not found (-19)
256<3>[ 0.261723 / 01-01 00:00:00.259][3] msm_thermal:get_cpu_freq_plan_len Error reading CPU0 freq table len. error:-19
257<3>[ 0.261741 / 01-01 00:00:00.259][3] cpu cpu4: dev_pm_opp_get_opp_count: device OPP not found (-19)
258<3>[ 0.261758 / 01-01 00:00:00.259][3] msm_thermal:get_cpu_freq_plan_len Error reading CPU4 freq table len. error:-19
259<6>[ 0.262440 / 01-01 00:00:00.259][1] qcom,gcc-8952 1800000.qcom,gcc: GPU speed bin: 0
260<6>[ 0.276301 / 01-01 00:00:00.269][1] qcom,gcc-spm-8952 b111200.qcom,spm: Registered GCC SPM clocks
261<6>[ 0.276338 / 01-01 00:00:00.269][1] qcom,gcc-8952 1800000.qcom,gcc: Registered GCC clocks
262<6>[ 0.277186 / 01-01 00:00:00.269][1] i2c-msm-v2 78b6000.i2c: probing driver i2c-msm-v2
263<3>[ 0.277380 / 01-01 00:00:00.269][1] AXI: msm_bus_scale_register_client(): msm_bus_scale_register_client: Bus driver not ready.
264<6>[ 0.277399 / 01-01 00:00:00.269][1] i2c-msm-v2 78b6000.i2c: msm_bus_scale_register_client(mstr-id:86):0 (not a problem)
265<6>[ 0.278710 / 01-01 00:00:00.269][2] i2c-msm-v2 78b7000.i2c: probing driver i2c-msm-v2
266<3>[ 0.278902 / 01-01 00:00:00.269][2] AXI: msm_bus_scale_register_client(): msm_bus_scale_register_client: Bus driver not ready.
267<6>[ 0.278920 / 01-01 00:00:00.269][2] i2c-msm-v2 78b7000.i2c: msm_bus_scale_register_client(mstr-id:86):0 (not a problem)
268<6>[ 0.279696 / 01-01 00:00:00.269][2] i2c-msm-v2 7af5000.i2c: probing driver i2c-msm-v2
269<3>[ 0.279884 / 01-01 00:00:00.269][2] AXI: msm_bus_scale_register_client(): msm_bus_scale_register_client: Bus driver not ready.
270<6>[ 0.279900 / 01-01 00:00:00.269][2] i2c-msm-v2 7af5000.i2c: msm_bus_scale_register_client(mstr-id:84):0 (not a problem)
271<6>[ 0.280707 / 01-01 00:00:00.279][2] cpu-clock-8939 b011050.qcom,cpu-clock-8939: No PVS version available. Defaulting to 0!
272<6>[ 0.280729 / 01-01 00:00:00.279][2] cpu-clock-8939 b011050.qcom,cpu-clock-8939: Speed bin: 0 PVS Version: 0
273<6>[ 0.283209 / 01-01 00:00:00.279][2] populate_opp_table: clock-cpu-8939: OPP tables populated (cpu 7 and 3)
274<6>[ 0.283225 / 01-01 00:00:00.279][2] print_opp_table: clock_cpu: a53_c0: OPP voltage for 768000000: 1110000
275<6>[ 0.283244 / 01-01 00:00:00.279][2] print_opp_table: clock_cpu: a53_c0: OPP voltage for 1094400000: 1220000
276<6>[ 0.283261 / 01-01 00:00:00.279][2] print_opp_table: clock_cpu: a53_c1: OPP voltage for 960000000: 1110000
277<6>[ 0.283278 / 01-01 00:00:00.279][2] print_opp_table: clock_cpu: a53_c1: OPP voltage for 1401000000: 1220000
278<3>[ 0.371936 / 01-01 00:00:00.369][2] qcom,qpnp-pin qpnp-pin-15: qpnp_pin_probe: no device nodes specified in topology
279<4>[ 0.371965 / 01-01 00:00:00.369][2] qcom,qpnp-pin: probe of qpnp-pin-15 failed with error -22
280<6>[ 0.373383 / 01-01 00:00:00.369][2] KPI: Bootloader start count = 29450
281<6>[ 0.373400 / 01-01 00:00:00.369][2] KPI: Bootloader end count = 315926
282<6>[ 0.373416 / 01-01 00:00:00.369][2] KPI: Bootloader display count = 45744
283<6>[ 0.373431 / 01-01 00:00:00.369][2] KPI: Bootloader load kernel count = 1674
284<6>[ 0.373447 / 01-01 00:00:00.369][2] KPI: Kernel MPM timestamp = 358709
285<6>[ 0.373461 / 01-01 00:00:00.369][2] KPI: Kernel MPM Clock frequency = 32768
286<6>[ 0.373494 / 01-01 00:00:00.369][2] socinfo_print: v0.10, id=294, ver=1.0, raw_id=79, raw_ver=0, hw_plat=96, hw_plat_ver=7
287<6>[ 0.373494 / 01-01 00:00:00.369][2] accessory_chip=0, hw_plat_subtype=0, pmic_model=65561, pmic_die_revision=65536 foundry_id=1 serial_number=3909169
288<6>[ 0.374380 / 01-01 00:00:00.369][2] adv_vreg: no parameters
289<5>[ 0.375506 / 01-01 00:00:00.369][2] SCSI subsystem initialized
290<6>[ 0.376166 / 01-01 00:00:00.369][2] usbcore: registered new interface driver usbfs
291<6>[ 0.376238 / 01-01 00:00:00.369][2] usbcore: registered new interface driver hub
292<6>[ 0.376418 / 01-01 00:00:00.369][2] usbcore: registered new device driver usb
293<6>[ 0.376556 / 01-01 00:00:00.369][2] media: Linux media interface: v0.10
294<6>[ 0.376617 / 01-01 00:00:00.369][2] Linux video capture interface: v2.00
295<6>[ 0.379791 / 01-01 00:00:00.369][2] cpufreq: driver msm up and running
296<6>[ 0.380178 / 01-01 00:00:00.379][2] platform soc:qcom,ion:qcom,ion-heap@27: assigned reserved memory node qseecom_region@0
297<6>[ 0.380379 / 01-01 00:00:00.379][2] ION heap system created
298<6>[ 0.380543 / 01-01 00:00:00.379][2] ION heap qsecom created at 0xfec00000 with size 1000000
299<3>[ 0.380774 / 01-01 00:00:00.379][2] msm_bus_fabric_init_driver
300<6>[ 0.390374 / 01-01 00:00:00.389][2] qcom,qpnp-power-on qpnp-power-on-4: PMIC@SID0 Power-on reason: Triggered from PON1 (secondary PMIC) and 'cold' boot
301<6>[ 0.390400 / 01-01 00:00:00.389][2] qcom,qpnp-power-on qpnp-power-on-4: PMIC@SID0: Power-off reason: Triggered from UVLO (Under Voltage Lock Out)
302<6>[ 0.390565 / 01-01 00:00:00.389][2] input: qpnp_pon as /devices/virtual/input/input0
303<6>[ 0.390902 / 01-01 00:00:00.389][2] pon_spare_reg: no parameters
304<6>[ 0.390970 / 01-01 00:00:00.389][2] qcom,qpnp-power-on qpnp-power-on-13: No PON config. specified
305<6>[ 0.391025 / 01-01 00:00:00.389][2] qcom,qpnp-power-on qpnp-power-on-13: PMIC@SID2 Power-on reason: Triggered from PON1 (secondary PMIC) and 'cold' boot
306<6>[ 0.391047 / 01-01 00:00:00.389][2] qcom,qpnp-power-on qpnp-power-on-13: PMIC@SID2: Power-off reason: Triggered from PS_HOLD (PS_HOLD/MSM controlled shutdown)
307<6>[ 0.391222 / 01-01 00:00:00.389][2] PMIC@SID0: PM8937 v1.0 options: 0, 2, 0, 0
308<6>[ 0.391320 / 01-01 00:00:00.389][2] PMIC@SID2: PMI8950 v2.0 options: 0, 0, 0, 0
309<6>[ 0.392379 / 01-01 00:00:00.389][2] gdsc_venus: no parameters
310<6>[ 0.392622 / 01-01 00:00:00.389][2] gdsc_mdss: no parameters
311<6>[ 0.392872 / 01-01 00:00:00.389][2] gdsc_jpeg: no parameters
312<6>[ 0.393298 / 01-01 00:00:00.389][2] gdsc_vfe: no parameters
313<6>[ 0.393732 / 01-01 00:00:00.389][2] gdsc_vfe1: no parameters
314<6>[ 0.393969 / 01-01 00:00:00.389][2] gdsc_cpp: no parameters
315<6>[ 0.394162 / 01-01 00:00:00.389][2] gdsc_oxili_gx: no parameters
316<6>[ 0.394352 / 01-01 00:00:00.389][2] gdsc_venus_core0: fast normal
317<6>[ 0.394539 / 01-01 00:00:00.389][2] gdsc_oxili_cx: no parameters
318<6>[ 0.395512 / 01-01 00:00:00.389][2] mdss_pll_probe: MDSS pll label = MDSS DSI 0 PLL
319<6>[ 0.395527 / 01-01 00:00:00.389][2] mdss_pll_probe: mdss_pll_probe: label=MDSS DSI 0 PLL PLL SSC enabled
320<6>[ 0.396118 / 01-01 00:00:00.389][2] dsi_pll_clock_register_lpm: Registered DSI PLL:0 clocks successfully
321<6>[ 0.396150 / 01-01 00:00:00.389][2] mdss_pll_probe: MDSS pll label = MDSS DSI 1 PLL
322<6>[ 0.396161 / 01-01 00:00:00.389][2] mdss_pll_probe: mdss_pll_probe: label=MDSS DSI 1 PLL PLL SSC enabled
323<6>[ 0.397957 / 01-01 00:00:00.389][2] dsi_pll_clock_register_lpm: Registered DSI PLL:1 clocks successfully
324<6>[ 0.398441 / 01-01 00:00:00.389][2] msm_iommu 1e00000.qcom,iommu: device apps_iommu (model: 500) mapped at f0380000, with 21 ctx banks
325<6>[ 0.404205 / 01-01 00:00:00.399][2] msm_iommu_ctx 1e20000.qcom,iommu-ctx: context q6 using bank 0
326<6>[ 0.404367 / 01-01 00:00:00.399][2] msm_iommu_ctx 1e21000.qcom,iommu-ctx: context adsp_sec_pixel using bank 1
327<6>[ 0.404523 / 01-01 00:00:00.399][2] msm_iommu_ctx 1e22000.qcom,iommu-ctx: context mdp_1 using bank 2
328<6>[ 0.404681 / 01-01 00:00:00.399][2] msm_iommu_ctx 1e23000.qcom,iommu-ctx: context venus_fw using bank 3
329<6>[ 0.404840 / 01-01 00:00:00.399][2] msm_iommu_ctx 1e24000.qcom,iommu-ctx: context venus_sec_non_pixel using bank 4
330<6>[ 0.404997 / 01-01 00:00:00.399][2] msm_iommu_ctx 1e25000.qcom,iommu-ctx: context venus_sec_bitstream using bank 5
331<6>[ 0.405159 / 01-01 00:00:00.399][2] msm_iommu_ctx 1e26000.qcom,iommu-ctx: context venus_sec_pixel using bank 6
332<6>[ 0.405343 / 01-01 00:00:00.399][2] msm_iommu_ctx 1e28000.qcom,iommu-ctx: context pronto_pil using bank 8
333<6>[ 0.405527 / 01-01 00:00:00.399][2] msm_iommu_ctx 1e29000.qcom,iommu-ctx: context mss_nav using bank 9
334<6>[ 0.405711 / 01-01 00:00:00.399][2] msm_iommu_ctx 1e2a000.qcom,iommu-ctx: context periph_rpm using bank 10
335<6>[ 0.405894 / 01-01 00:00:00.399][2] msm_iommu_ctx 1e2b000.qcom,iommu-ctx: context lpass using bank 11
336<6>[ 0.406080 / 01-01 00:00:00.399][2] msm_iommu_ctx 1e2f000.qcom,iommu-ctx: context adsp_io using bank 15
337<6>[ 0.406263 / 01-01 00:00:00.399][2] msm_iommu_ctx 1e30000.qcom,iommu-ctx: context adsp_opendsp using bank 16
338<6>[ 0.406447 / 01-01 00:00:00.399][2] msm_iommu_ctx 1e31000.qcom,iommu-ctx: context adsp_shared using bank 17
339<6>[ 0.406638 / 01-01 00:00:00.399][2] msm_iommu_ctx 1e32000.qcom,iommu-ctx: context cpp using bank 18
340<6>[ 0.406822 / 01-01 00:00:00.399][2] msm_iommu_ctx 1e33000.qcom,iommu-ctx: context jpeg_enc0 using bank 19
341<6>[ 0.407006 / 01-01 00:00:00.399][2] msm_iommu_ctx 1e34000.qcom,iommu-ctx: context vfe using bank 20
342<6>[ 0.407191 / 01-01 00:00:00.399][2] msm_iommu_ctx 1e35000.qcom,iommu-ctx: context mdp_0 using bank 21
343<6>[ 0.407379 / 01-01 00:00:00.399][2] msm_iommu_ctx 1e36000.qcom,iommu-ctx: context venus_ns using bank 22
344<6>[ 0.407563 / 01-01 00:00:00.399][2] msm_iommu_ctx 1e38000.qcom,iommu-ctx: context mss_mcdma using bank 24
345<6>[ 0.407748 / 01-01 00:00:00.399][2] msm_iommu_ctx 1e37000.qcom,iommu-ctx: context access_control using bank 23
346<3>[ 0.409557 / 01-01 00:00:00.399][2] /soc/qcom,cam_smmu/msm_cam_smmu_cb1: could not get #iommu-cells for /soc/qcom,iommu@1e00000
347<3>[ 0.409586 / 01-01 00:00:00.399][2] /soc/qcom,cam_smmu/msm_cam_smmu_cb3: could not get #iommu-cells for /soc/qcom,iommu@1e00000
348<3>[ 0.409613 / 01-01 00:00:00.399][2] /soc/qcom,cam_smmu/msm_cam_smmu_cb4: could not get #iommu-cells for /soc/qcom,iommu@1e00000
349<6>[ 0.411526 / 01-01 00:00:00.409][2] Advanced Linux Sound Architecture Driver Initialized.
350<6>[ 0.412302 / 01-01 00:00:00.409][2] Bluetooth: ee053ed0
351<6>[ 0.412333 / 01-01 00:00:00.409][2] NET: Registered protocol family 31
352<6>[ 0.412343 / 01-01 00:00:00.409][2] Bluetooth: ee053ed0
353<6>[ 0.412355 / 01-01 00:00:00.409][2] Bluetooth: ee053ec8Bluetooth: ee053eb0
354<6>[ 0.412386 / 01-01 00:00:00.409][2] Bluetooth: ee053ec0<6>[ 0.412705 / 01-01 00:00:00.409][2] cfg80211: Calling CRDA to update world regulatory domain
355<6>[ 0.412729 / 01-01 00:00:00.409][2] cfg80211: World regulatory domain updated:
356<6>[ 0.412738 / 01-01 00:00:00.409][2] cfg80211: DFS Master region: unset
357<6>[ 0.412745 / 01-01 00:00:00.409][2] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
358<6>[ 0.412757 / 01-01 00:00:00.409][2] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
359<6>[ 0.412768 / 01-01 00:00:00.409][2] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
360<6>[ 0.412779 / 01-01 00:00:00.409][2] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A, 2000 mBm), (N/A)
361<6>[ 0.412789 / 01-01 00:00:00.409][2] cfg80211: (5170000 KHz - 5250000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A)
362<6>[ 0.412800 / 01-01 00:00:00.409][2] cfg80211: (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A)
363<6>[ 0.412811 / 01-01 00:00:00.409][2] cfg80211: (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm), (N/A)
364<6>[ 0.413305 / 01-01 00:00:00.409][5] ibb_reg: 4600 <--> 6000 mV at 5500 mV
365<6>[ 0.413687 / 01-01 00:00:00.409][5] lab_reg: 4600 <--> 6000 mV at 5500 mV
366<6>[ 0.415928 / 01-01 00:00:00.409][0] Switched to clocksource arch_sys_counter
367<6>[ 0.437591 / 01-01 00:00:00.429][0] bcl_peripheral:bcl_perph_init BCL Initialized
368<6>[ 0.439432 / 01-01 00:00:00.429][0] NET: Registered protocol family 2
369<6>[ 0.439906 / 01-01 00:00:00.429][0] TCP established hash table entries: 8192 (order: 3, 32768 bytes)
370<6>[ 0.439961 / 01-01 00:00:00.429][0] TCP bind hash table entries: 8192 (order: 4, 65536 bytes)
371<6>[ 0.440082 / 01-01 00:00:00.439][0] TCP: Hash tables configured (established 8192 bind 8192)
372<6>[ 0.440120 / 01-01 00:00:00.439][0] TCP: reno registered
373<6>[ 0.440133 / 01-01 00:00:00.439][0] UDP hash table entries: 512 (order: 2, 16384 bytes)
374<6>[ 0.440160 / 01-01 00:00:00.439][0] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
375<6>[ 0.440282 / 01-01 00:00:00.439][0] NET: Registered protocol family 1
376<6>[ 0.441615 / 01-01 00:00:00.439][0] gcc-mdss-8952 soc:qcom,gcc-mdss@1800000: Registered GCC MDSS clocks.
377<6>[ 0.442684 / 01-01 00:00:00.439][0] Trying to unpack rootfs image as initramfs...
378<6>[ 0.622245 / 01-01 00:00:00.619][0] Freeing initrd memory: 5072K (c3c00000 - c40f4000)
379<6>[ 0.625152 / 01-01 00:00:00.619][0] hw perfevents: enabled with ARMv8 Cortex-A53 PMU driver, 7 counters available
380<6>[ 0.629222 / 01-01 00:00:00.619][0] futex hash table entries: 2048 (order: 5, 131072 bytes)
381<5>[ 0.629312 / 01-01 00:00:00.619][0] Initialise system trusted keyring
382<6>[ 0.629365 / 01-01 00:00:00.619][0] audit: initializing netlink subsys (disabled)
383<5>[ 0.629406 / 01-01 00:00:00.619][0] audit: type=2000 audit(0.619:1): initialized
384<4>[ 0.629816 / 01-01 00:00:00.619][0] vmscan: error setting kswapd cpu affinity mask
385<6>[ 0.634773 / 01-01 00:00:00.629][0] Registering sdcardfs 2.1.3-2
386<6>[ 0.634891 / 01-01 00:00:00.629][0] fuse init (API version 7.23)
387<7>[ 0.635131 / 01-01 00:00:00.629][0] SELinux: Registering netfilter hooks
388<5>[ 0.637378 / 01-01 00:00:00.629][0] Key type asymmetric registered
389<5>[ 0.637392 / 01-01 00:00:00.629][0] Asymmetric key parser 'x509' registered
390<6>[ 0.637443 / 01-01 00:00:00.629][0] bounce: pool size: 64 pages
391<6>[ 0.637530 / 01-01 00:00:00.629][0] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 250)
392<6>[ 0.637545 / 01-01 00:00:00.629][0] io scheduler noop registered
393<6>[ 0.637557 / 01-01 00:00:00.629][0] io scheduler deadline registered
394<6>[ 0.637638 / 01-01 00:00:00.629][0] io scheduler cfq registered (default)
395<3>[ 0.641799 / 01-01 00:00:00.639][0] i2c-msm-v2 78b6000.i2c: msm_bus_scale_register_client(mstr-id:86):0x1 (ok)
396<3>[ 0.641940 / 01-01 00:00:00.639][0] i2c-msm-v2 78b6000.i2c: NACK: slave not responding, ensure its powered: msgs(n:2 cur:0 tx) bc(rx:1 tx:1) mode:FIFO slv_addr:0x39 MSTR_STS:0x0d1300c8 OPER:0x00000010
397<3>[ 0.641980 / 01-01 00:00:00.639][0] msm_dba_helper_i2c_read: i2c read failed
398<3>[ 0.641992 / 01-01 00:00:00.639][0] adv7533_read: read err: addr 0x39, reg 0x0, size 0x1
399<3>[ 0.642001 / 01-01 00:00:00.639][0] adv7533_probe: Failed to read chip rev
400<4>[ 0.642069 / 01-01 00:00:00.639][0] adv7533: probe of 2-0039 failed with error -5
401<3>[ 0.642319 / 01-01 00:00:00.639][0] msm_dss_get_res_byname: 'vbif_nrt_phys' resource not found
402<3>[ 0.642336 / 01-01 00:00:00.639][0] mdss_mdp_probe+0x18c/0x1050->msm_dss_ioremap_byname: 'vbif_nrt_phys' msm_dss_get_res_byname failed
403<3>[ 0.642737 / 01-01 00:00:00.639][0] mdss_mdp_irq_clk_register: unable to get clk: lut_clk
404<3>[ 0.643166 / 01-01 00:00:00.639][0] No change in context(0==0), skip
405<6>[ 0.643657 / 01-01 00:00:00.639][0] mdss_mdp_pipe_addr_setup: type:0 ftchid:-1 xinid:0 num:0 rect:0 ndx:0x1 prio:0
406<6>[ 0.643685 / 01-01 00:00:00.639][0] mdss_mdp_pipe_addr_setup: type:1 ftchid:-1 xinid:1 num:3 rect:0 ndx:0x8 prio:1
407<6>[ 0.643697 / 01-01 00:00:00.639][0] mdss_mdp_pipe_addr_setup: type:1 ftchid:-1 xinid:5 num:4 rect:0 ndx:0x10 prio:2
408<6>[ 0.643720 / 01-01 00:00:00.639][0] mdss_mdp_pipe_addr_setup: type:2 ftchid:-1 xinid:2 num:6 rect:0 ndx:0x40 prio:3
409<6>[ 0.643743 / 01-01 00:00:00.639][0] mdss_mdp_pipe_addr_setup: type:3 ftchid:-1 xinid:7 num:10 rect:0 ndx:0x400 prio:0
410<3>[ 0.643762 / 01-01 00:00:00.639][0] mdss_mdp_parse_dt_handler: Error from prop qcom,mdss-pipe-sw-reset-off : u32 array read
411<3>[ 0.643889 / 01-01 00:00:00.639][0] mdss_mdp_parse_dt_handler: Error from prop qcom,mdss-ib-factor-overlap : u32 array read
412<6>[ 0.644142 / 01-01 00:00:00.639][0] xlog_status: enable:0, panic:1, dump:2
413<6>[ 0.644771 / 01-01 00:00:00.639][0] mdss_mdp_probe: mdss version = 0x100e0000, bootloader display is on, num 1, intf_sel=0x00000100
414<3>[ 0.646416 / 01-01 00:00:00.639][0] mdss_smmu_util_parse_dt_clock: clocks are not defined
415<6>[ 0.646452 / 01-01 00:00:00.639][0] mdss_smmu_probe: iommu v2 domain[0] mapping and clk register successful!
416<3>[ 0.646479 / 01-01 00:00:00.639][0] mdss_smmu_util_parse_dt_clock: clocks are not defined
417<6>[ 0.646493 / 01-01 00:00:00.639][0] mdss_smmu_probe: iommu v2 domain[2] mapping and clk register successful!
418<6>[ 0.648201 / 01-01 00:00:00.639][0] mdss_dsi_ctrl_probe: DSI Ctrl name = MDSS DSI CTRL->0
419<6>[ 0.648670 / 01-01 00:00:00.639][0] mdss_dsi_find_panel_of_node: cmdline:0:qcom,mdss_dsi_lgd_incell_db7400_hd_video:1:none:cfg:single_dsi panel_name:qcom,mdss_dsi_lgd_incell_db7400_hd_video
420<6>[ 0.648739 / 01-01 00:00:00.639][0] mdss_dsi_panel_init: Panel Name = LGD DONGBU HITEK INCELL HD video mode dsi panel
421<6>[ 0.648956 / 01-01 00:00:00.639][0] mdss_dsi_panel_timing_from_dt: found new timing "qcom,mdss_dsi_lgd_incell_db7400_hd_video" (ee0537a0)
422<3>[ 0.648986 / 01-01 00:00:00.639][0] mdss_dsi_parse_dcs_cmds: failed, key=qcom,mdss-dsi-post-panel-on-command
423<3>[ 0.649001 / 01-01 00:00:00.639][0] mdss_dsi_parse_dcs_cmds: failed, key=qcom,mdss-dsi-timing-switch-command
424<4>[ 0.649011 / 01-01 00:00:00.639][0] mdss_dsi_panel_get_dsc_cfg_np: cannot find dsc config node:
425<6>[ 0.649150 / 01-01 00:00:00.639][0] mdss_dsi_parse_panel_features: ulps feature disabled
426<6>[ 0.649163 / 01-01 00:00:00.639][0] mdss_dsi_parse_panel_features: ulps during suspend feature disabled
427<6>[ 0.649174 / 01-01 00:00:00.639][0] mdss_dsi_parse_dms_config: dynamic switch feature enabled: 0
428<6>[ 0.649293 / 01-01 00:00:00.639][0] lge_mdss_panel_parse_dt_extra: esc-clk-rate not specified
429<6>[ 0.649304 / 01-01 00:00:00.639][0] parse_dt_extra_dcs_cmds: num_extra_cmds=1
430<6>[ 0.649375 / 01-01 00:00:00.639][0] lge_set_display_power_ctrl: display_power_ctrl [0]
431<6>[ 0.649384 / 01-01 00:00:00.639][0] lge_init_mfts: mfts_mode : 0
432<3>[ 0.649513 / 01-01 00:00:00.639][0] no supply entry present: lge,extra-supply-entries
433<3>[ 0.649540 / 01-01 00:00:00.639][0] mdss_dsi_parse_ctrl_params:3978 Unable to read qcom,display-id, data=00000000,len=45
434<3>[ 0.649553 / 01-01 00:00:00.639][0] mdss_dsi_parse_gpio_params:4012, TE gpio not specified
435<6>[ 0.649563 / 01-01 00:00:00.639][0] mdss_dsi_parse_gpio_params: bklt_en gpio not specified
436<6>[ 0.649580 / 01-01 00:00:00.639][0] lge_mdss_dsi_parse_gpio_params: num_gpios=4
437<6>[ 0.649605 / 01-01 00:00:00.639][0] lge_mdss_dsi_parse_clk_params: esc-clk-rate not specified
438<6>[ 0.649638 / 01-01 00:00:00.639][0] mdss_dsi_retrieve_ctrl_resources: phy_regulator_base=f0308b80 phy_regulator_size=30
439<6>[ 0.649649 / 01-01 00:00:00.639][0] mdss_dsi_retrieve_ctrl_resources: ctrl_base=f01fe000 ctrl_size=300 phy_base=f0302400 phy_size=280
440<6>[ 0.649747 / 01-01 00:00:00.639][0] dsi_panel_device_register: Continuous splash enabled
441<6>[ 0.649914 / 01-01 00:00:00.639][0] mdss_register_panel: adding framebuffer device 1a94000.qcom,mdss_dsi_ctrl0
442<6>[ 0.650333 / 01-01 00:00:00.649][0] mdss_dsi_panel_reset: + enable = 1 (override: ph2n_tmo_us)
443<6>[ 0.650343 / 01-01 00:00:00.649][0] mdss_dsi_panel_reset: -
444<6>[ 0.670954 / 01-01 00:00:00.669][0] mdss_dsi_ctrl_probe: Dsi Ctrl->0 initialized, DSI rev:0x10040002, PHY rev:0x1
445<6>[ 0.671149 / 01-01 00:00:00.669][0] mdss_dsi_ctrl_probe: DSI Ctrl name = MDSS DSI CTRL->1
446<3>[ 0.671162 / 01-01 00:00:00.669][0] mdss_dsi_pinctrl_init: failed to get pinctrl
447<4>[ 0.671171 / 01-01 00:00:00.669][0] mdss_dsi_ctrl_probe: failed to get pin resources
448<6>[ 0.671583 / 01-01 00:00:00.669][0] mdss_dsi_find_panel_of_node: cmdline:0:qcom,mdss_dsi_lgd_incell_db7400_hd_video:1:none:cfg:single_dsi panel_name:none
449<3>[ 0.671594 / 01-01 00:00:00.669][0] mdss_dsi_config_panel: can't find panel node 0:qcom,mdss_dsi_lgd_incell_db7400_hd_video:1:none:cfg:single_dsi
450<3>[ 0.671603 / 01-01 00:00:00.669][0] mdss_dsi_ctrl_probe: panel configuration failed
451<4>[ 0.671620 / 01-01 00:00:00.669][0] mdss_dsi_ctrl: probe of 1a96000.qcom,mdss_dsi_ctrl1 failed with error -22
452<6>[ 0.671739 / 01-01 00:00:00.669][0] mdss_dsi_status_init: DSI status check interval:1700
453<6>[ 0.672163 / 01-01 00:00:00.669][0] mdss_register_panel: adding framebuffer device soc:qcom,mdss_wb_panel
454<6>[ 0.672654 / 01-01 00:00:00.669][0] mdss_fb_probe: fb0: split_mode:0 left:0 right:0
455<6>[ 0.673085 / 01-01 00:00:00.669][0] mdss_fb_register: FrameBuffer[0] 720x1280 registered successfully!
456<6>[ 0.673444 / 01-01 00:00:00.669][0] mdss_fb_probe: fb1: split_mode:0 left:0 right:0
457<6>[ 0.673536 / 01-01 00:00:00.669][0] mdss_fb_register: FrameBuffer[1] 640x640 registered successfully!
458<3>[ 0.673637 / 01-01 00:00:00.669][0] mdss_mdp_splash_parse_dt: splash mem child node is not present
459<3>[ 0.675853 / 01-01 00:00:00.669][0] IPC_RTR: msm_ipc_router_smd_driver_register Already driver registered IPCRTR
460<3>[ 0.675882 / 01-01 00:00:00.669][0] IPC_RTR: msm_ipc_router_smd_driver_register Already driver registered IPCRTR
461<6>[ 0.680084 / 01-01 00:00:00.679][0] In memshare_probe, Memshare probe success
462<5>[ 0.681638 / 01-01 00:00:00.679][0] msm_rpm_log_probe: OK
463<6>[ 0.684395 / 01-01 00:00:00.679][0] subsys-pil-tz 1de0000.qcom,venus: for venus segments only will be dumped.
464<6>[ 0.686599 / 01-01 00:00:00.679][1] bootlog_probe: start 0x357b
465<6>[ 0.686610 / 01-01 00:00:00.679][1] bootlog_probe: size 0x1fff4
466<6>[ 0.686619 / 01-01 00:00:00.679][1] -------------------------------------------------
467<6>[ 0.686627 / 01-01 00:00:00.679][1] below logs are got from bootloader
468<6>[ 0.686635 / 01-01 00:00:00.679][1] -------------------------------------------------
469<6>[ 0.686643 / 01-01 00:00:00.679][1]
470<6>[ 0.686652 / 01-01 00:00:00.679][1]
471<6>[ 0.686684 / 01-01 00:00:00.679][1] Format: Log Type - Time(microsec) - Message - Optional Info
472<6>[ 0.686718 / 01-01 00:00:00.679][1] Log Type: B - Since Boot(Power On Reset), D - Delta, S - Statistic
473<6>[ 0.686742 / 01-01 00:00:00.679][1] B - 235917 - Earjack Debugger Detected
474<6>[ 0.686767 / 01-01 00:00:00.679][1] S - QC_IMAGE_VERSION_STRING=BOOT.BF.3.3-00155
475<6>[ 0.686789 / 01-01 00:00:00.679][1] S - IMAGE_VARIANT_STRING=FAASANAZA
476<6>[ 0.686810 / 01-01 00:00:00.679][1] S - OEM_IMAGE_VERSION_STRING=LGE
477<6>[ 0.686829 / 01-01 00:00:00.679][1] S - Boot Config, 0x000000e1
478<6>[ 0.686848 / 01-01 00:00:00.679][1] B - 246 - PBL, Start
479<6>[ 0.686875 / 01-01 00:00:00.679][1] B - 2948 - bootable_media_detect_entry, Start
480<6>[ 0.686903 / 01-01 00:00:00.679][1] B - 57048 - bootable_media_detect_success, Start
481<6>[ 0.686926 / 01-01 00:00:00.679][1] B - 57054 - elf_loader_entry, Start
482<6>[ 0.686951 / 01-01 00:00:00.679][1] B - 58705 - auth_hash_seg_entry, Start
483<6>[ 0.686975 / 01-01 00:00:00.679][1] B - 95769 - auth_hash_seg_exit, Start
484<6>[ 0.687002 / 01-01 00:00:00.679][1] B - 125715 - elf_segs_hash_verify_entry, Start
485<6>[ 0.687020 / 01-01 00:00:00.679][1] B - 222454 - PBL, End
486<6>[ 0.687039 / 01-01 00:00:00.679][1] B - 235216 - SBL1, Start
487<6>[ 0.687062 / 01-01 00:00:00.679][1] B - 289689 - pm_device_init, Start
488<6>[ 0.687094 / 01-01 00:00:00.679][1] B - 292800 - PON REASON:PM0:0x2000000000a0 PM1:0x200000020
489<6>[ 0.687117 / 01-01 00:00:00.679][1] B - 318206 - boot_flash_init, Start
490<6>[ 0.687144 / 01-01 00:00:00.679][1] B - 318267 - boot_config_data_table_init, Start
491<6>[ 0.687181 / 01-01 00:00:00.679][1] B - 319823 - CDT version:3,Platform ID:96,Major ID:1,Minor ID:0,Subtype:0
492<6>[ 0.687207 / 01-01 00:00:00.679][1] B - 326777 - sbl1_ddr_set_params, Start
493<6>[ 0.687227 / 01-01 00:00:00.679][1] B - 351146 - cpr_init, Start
494<6>[ 0.687251 / 01-01 00:00:00.679][1] B - 354867 - Pre_DDR_clock_init, Start
495<6>[ 0.687275 / 01-01 00:00:00.679][1] B - 356941 - do ddr sanity test, Start
496<6>[ 0.687298 / 01-01 00:00:00.679][1] B - 357277 - pm_driver_init, Start
497<6>[ 0.687319 / 01-01 00:00:00.679][1] B - 362614 - vsense_init, Start
498<6>[ 0.687345 / 01-01 00:00:00.679][1] D - 274 - DDR Training restore, Delta
499<6>[ 0.687366 / 01-01 00:00:00.679][1] B - 373991 - clock_init, Start
500<6>[ 0.687392 / 01-01 00:00:00.679][1] B - 374265 - pm_sbl_set_qpnp_smb_init start
501<6>[ 0.687416 / 01-01 00:00:00.679][1] B - 375272 - raw vbat: 3939, gain: -19
502<6>[ 0.687440 / 01-01 00:00:00.679][1] B - 378718 - raw vbat: 3939, gain: -19
503<6>[ 0.687458 / 01-01 00:00:00.679][1] B - 392748 - Img Ld, S
504<6>[ 0.687489 / 01-01 00:00:00.679][1] D - 106293 - QSEE Image Loaded, Delta - (1370364 Bytes)
505<6>[ 0.687510 / 01-01 00:00:00.679][1] B - 509411 - Image Load, Start
506<6>[ 0.687539 / 01-01 00:00:00.679][1] D - 2318 - SEC Image Loaded, Delta - (2048 Bytes)
507<6>[ 0.687565 / 01-01 00:00:00.679][1] B - 512369 - sbl1_efs_handle_cookies, Start
508<6>[ 0.687585 / 01-01 00:00:00.679][1] B - 526186 - Board_rev:1.1
509<6>[ 0.687608 / 01-01 00:00:00.679][1] B - 526247 - read_usb_cable_type, s
510<6>[ 0.687635 / 01-01 00:00:00.679][1] B - 530761 - [ADC][usb_id=1785][cable_type=12]
511<6>[ 0.687661 / 01-01 00:00:00.679][1] B - 613721 - boot_power_longkey_check, start
512<6>[ 0.687691 / 01-01 00:00:00.679][1] B - 613782 - boot_cause = 0xa0, warm_boot_cause = 0x0
513<6>[ 0.687715 / 01-01 00:00:00.679][1] D - 13328 - boot_power_longkey, Delta
514<6>[ 0.687733 / 01-01 00:00:00.679][1] B - 627080 - Img Ld, S
515<6>[ 0.687764 / 01-01 00:00:00.679][1] D - 38460 - DEVCFG Image Loaded, Delta - (47756 Bytes)
516<6>[ 0.687782 / 01-01 00:00:00.679][1] B - 666059 - Img Ld, S
517<6>[ 0.687811 / 01-01 00:00:00.679][1] D - 34831 - APDP Image Loaded, Delta - (7696 Bytes)
518<6>[ 0.687829 / 01-01 00:00:00.679][1] B - 700890 - Img Ld, S
519<6>[ 0.687859 / 01-01 00:00:00.679][1] D - 47092 - RPM Image Loaded, Delta - (179504 Bytes)
520<6>[ 0.687877 / 01-01 00:00:00.679][1] B - 748012 - Img Ld, S
521<6>[ 0.687908 / 01-01 00:00:00.679][1] D - 67375 - APPSBL Image Loaded, Delta - (666520 Bytes)
522<6>[ 0.687930 / 01-01 00:00:00.679][1] B - 815417 - QSEE Execution, Start
523<6>[ 0.687948 / 01-01 00:00:00.679][1] B - 817827 - SBL1, End
524<6>[ 0.687967 / 01-01 00:00:00.679][1] D - 584868 - SBL1, Delta
525<6>[ 0.687985 / 01-01 00:00:00.679][1] S - Flash Perf, 22000 KB/s
526<6>[ 0.688002 / 01-01 00:00:00.679][1] S - DDR Freq. 662 MHz
527<6>[ 0.688021 / 01-01 00:00:00.679][1] S - Core 0 Freq. 800 MHz
528<6>[ 0.688038 / 01-01 00:00:00.679][1] [40] card->ext_csd[192]=7
529<6>[ 0.688084 / 01-01 00:00:00.679][1] [40] [FS] tuned_phase_cnt: 15 tuned_phases = [ 0, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 15, ]
530<6>[ 0.688114 / 01-01 00:00:00.679][1] [40] [FS] sdhci_msm_execute_tuning: Tuned Phase: 0x0000000c
531<6>[ 0.688136 / 01-01 00:00:00.679][1] [50] set_dload_mode: download_mode:0
532<6>[ 0.688156 / 01-01 00:00:00.679][1] [50] Unsupported hardware id
533<6>[ 0.688176 / 01-01 00:00:00.679][1] [50] Qseecom Init Done in Appsbl
534<6>[ 0.688232 / 01-01 00:00:00.679][1] [50] secure app region addr=0x85500000 size=0xe00000[50] TZ App region notif returned with status:0 addr:85500000 size:14680064
535<6>[ 0.688269 / 01-01 00:00:00.679][1] [50] TZ App log region register returned with status:0 addr:8f6c1000 size:4096
536<6>[ 0.688292 / 01-01 00:00:00.679][1] [50] Qseecom TZ Init Done in Appsbl
537<6>[ 0.688309 / 01-01 00:00:00.679][1] [70] Loading cmnlib done
538<6>[ 0.688332 / 01-01 00:00:00.679][1] [90] <8>keymaster: "\"KEYMASTER Init \""
539<6>[ 0.688364 / 01-01 00:00:00.679][1] [100] <8>keymaster: "\"cmd_id=KEYMASTER_READ_KM_DEVICE_STATE\""
540<6>[ 0.688390 / 01-01 00:00:00.679][1] [110] oem.panel D : lgd_incell_db7400_hd_video
541<6>[ 0.688413 / 01-01 00:00:00.679][1] [240] Display Power Mode : 0, status : 0
542<6>[ 0.688439 / 01-01 00:00:00.679][1] [520] target_home_key: should be implemented
543<6>[ 0.688464 / 01-01 00:00:00.679][1] [730] target_home_key: should be implemented
544<6>[ 0.688489 / 01-01 00:00:00.679][1] [940] target_home_key: should be implemented
545<6>[ 0.688514 / 01-01 00:00:00.679][1] [1150] target_home_key: should be implemented
546<6>[ 0.688539 / 01-01 00:00:00.679][1] [1360] target_home_key: should be implemented
547<6>[ 0.688565 / 01-01 00:00:00.679][1] [1570] target_home_key: should be implemented
548<6>[ 0.688591 / 01-01 00:00:00.679][1] [1780] target_home_key: should be implemented
549<6>[ 0.688616 / 01-01 00:00:00.679][1] [1990] target_home_key: should be implemented
550<6>[ 0.688641 / 01-01 00:00:00.679][1] [2200] target_home_key: should be implemented
551<6>[ 0.688666 / 01-01 00:00:00.679][1] [2410] target_home_key: should be implemented
552<6>[ 0.688692 / 01-01 00:00:00.679][1] [2620] target_home_key: should be implemented
553<6>[ 0.688717 / 01-01 00:00:00.679][1] [2830] target_home_key: should be implemented
554<6>[ 0.688742 / 01-01 00:00:00.679][1] [3040] target_home_key: should be implemented
555<6>[ 0.688767 / 01-01 00:00:00.679][1] [3250] target_home_key: should be implemented
556<6>[ 0.688792 / 01-01 00:00:00.679][1] [3460] target_home_key: should be implemented
557<6>[ 0.688818 / 01-01 00:00:00.679][1] [3670] target_home_key: should be implemented
558<6>[ 0.688844 / 01-01 00:00:00.679][1] [3880] target_home_key: should be implemented
559<6>[ 0.688868 / 01-01 00:00:00.679][1] [4090] target_home_key: should be implemented
560<6>[ 0.688894 / 01-01 00:00:00.679][1] [4300] target_home_key: should be implemented
561<6>[ 0.688919 / 01-01 00:00:00.679][1] [4510] target_home_key: should be implemented
562<6>[ 0.688944 / 01-01 00:00:00.679][1] [4720] target_home_key: should be implemented
563<6>[ 0.688972 / 01-01 00:00:00.679][1] [4720] target_selectmode_init: selectmode_get_mode()=3
564<6>[ 0.689001 / 01-01 00:00:00.679][1] [4720] get_image_info: img_info[0].name lglogo_image
565<6>[ 0.689030 / 01-01 00:00:00.679][1] [4720] get_image_info: img_info[1].name LGE_PM_NO_CHARGER
566<6>[ 0.689062 / 01-01 00:00:00.679][1] [4720] get_image_info: img_info[2].name LGE_PM_WEAK_CHARGING_ON
567<6>[ 0.689094 / 01-01 00:00:00.679][1] [4720] get_image_info: img_info[3].name LGE_PM_NO_BATTERY_ANI_01
568<6>[ 0.689127 / 01-01 00:00:00.679][1] [4720] get_image_info: img_info[4].name LGE_PM_NO_BATTERY_ANI_02
569<6>[ 0.689155 / 01-01 00:00:00.679][1] [4720] get_image_info: img_info[5].name downloadmode
570<6>[ 0.689185 / 01-01 00:00:00.679][1] [4720] get_image_info: img_info[6].name load_charger_image
571<6>[ 0.689218 / 01-01 00:00:00.679][1] [4720] get_image_info: img_info[7].name factory_reset_no_1st_image
572<6>[ 0.689252 / 01-01 00:00:00.679][1] [4720] get_image_info: img_info[8].name factory_reset_yes_1st_image
573<6>[ 0.689285 / 01-01 00:00:00.679][1] [4720] get_image_info: img_info[9].name factory_reset_no_2nd_image
574<6>[ 0.689318 / 01-01 00:00:00.679][1] [4720] get_image_info: img_info[10].name factory_reset_yes_2nd_image
575<6>[ 0.689348 / 01-01 00:00:00.679][1] [4720] get_image_info: img_info[11].name imei_guide_image
576<6>[ 0.689377 / 01-01 00:00:00.679][1] [4720] get_image_info: img_info[12].name imei_main_image
577<6>[ 0.689407 / 01-01 00:00:00.679][1] [4720] get_image_info: img_info[13].name kswitch_factory
578<6>[ 0.689435 / 01-01 00:00:00.679][1] [4720] get_image_info: img_info[14].name kswitch_dload
579<6>[ 0.689464 / 01-01 00:00:00.679][1] [4720] get_image_info: img_info[15].name system_errlogo
580<6>[ 0.689495 / 01-01 00:00:00.679][1] [4720] get_image_info: img_info[16].name verifiedboot_red_01
581<6>[ 0.689527 / 01-01 00:00:00.679][1] [4720] get_image_info: img_info[17].name verifiedboot_red_02
582<6>[ 0.689558 / 01-01 00:00:00.679][1] [4720] get_image_info: img_info[18].name verifiedboot_orange_01
583<6>[ 0.689590 / 01-01 00:00:00.679][1] [4720] get_image_info: img_info[19].name verifiedboot_orange_02
584<6>[ 0.689622 / 01-01 00:00:00.679][1] [4720] get_image_info: img_info[20].name verifiedboot_yellow_01
585<6>[ 0.689654 / 01-01 00:00:00.679][1] [4720] get_image_info: img_info[21].name verifiedboot_yellow_02
586<6>[ 0.689677 / 01-01 00:00:00.679][1] [4720] get_image_info: Image not found
587<6>[ 0.689704 / 01-01 00:00:00.679][1] [4720] get_image_info: img_info[0].name lglogo_image
588<6>[ 0.689734 / 01-01 00:00:00.679][1] [4720] get_image_info: img_info[1].name LGE_PM_NO_CHARGER
589<6>[ 0.689765 / 01-01 00:00:00.679][1] [4720] get_image_info: img_info[2].name LGE_PM_WEAK_CHARGING_ON
590<6>[ 0.689799 / 01-01 00:00:00.679][1] [4720] get_image_info: img_info[3].name LGE_PM_NO_BATTERY_ANI_01
591<6>[ 0.689831 / 01-01 00:00:00.679][1] [4720] get_image_info: img_info[4].name LGE_PM_NO_BATTERY_ANI_02
592<6>[ 0.689858 / 01-01 00:00:00.679][1] [4720] get_image_info: img_info[5].name downloadmode
593<6>[ 0.689888 / 01-01 00:00:00.679][1] [4720] get_image_info: img_info[6].name load_charger_image
594<6>[ 0.689922 / 01-01 00:00:00.679][1] [4720] get_image_info: img_info[7].name factory_reset_no_1st_image
595<6>[ 0.689956 / 01-01 00:00:00.679][1] [4720] get_image_info: img_info[8].name factory_reset_yes_1st_image
596<6>[ 0.689988 / 01-01 00:00:00.679][1] [4720] get_image_info: img_info[9].name factory_reset_no_2nd_image
597<6>[ 0.690022 / 01-01 00:00:00.679][1] [4720] get_image_info: img_info[10].name factory_reset_yes_2nd_image
598<6>[ 0.690052 / 01-01 00:00:00.689][1] [4720] get_image_info: img_info[11].name imei_guide_image
599<6>[ 0.690110 / 01-01 00:00:00.689][1] [4720] get_image_info: img_info[12].name imei_main_image
600<6>[ 0.690139 / 01-01 00:00:00.689][1] [4720] get_image_info: img_info[13].name kswitch_factory
601<6>[ 0.690168 / 01-01 00:00:00.689][1] [4720] get_image_info: img_info[14].name kswitch_dload
602<6>[ 0.690198 / 01-01 00:00:00.689][1] [4720] get_image_info: img_info[15].name system_errlogo
603<6>[ 0.690229 / 01-01 00:00:00.689][1] [4720] get_image_info: img_info[16].name verifiedboot_red_01
604<6>[ 0.690259 / 01-01 00:00:00.689][1] [4720] get_image_info: img_info[17].name verifiedboot_red_02
605<6>[ 0.690291 / 01-01 00:00:00.689][1] [4720] get_image_info: img_info[18].name verifiedboot_orange_01
606<6>[ 0.690323 / 01-01 00:00:00.689][1] [4720] get_image_info: img_info[19].name verifiedboot_orange_02
607<6>[ 0.690356 / 01-01 00:00:00.689][1] [4720] get_image_info: img_info[20].name verifiedboot_yellow_01
608<6>[ 0.690387 / 01-01 00:00:00.689][1] [4720] get_image_info: img_info[21].name verifiedboot_yellow_02
609<6>[ 0.690410 / 01-01 00:00:00.689][1] [4720] get_image_info: Image not found
610<6>[ 0.690438 / 01-01 00:00:00.689][1] [4720] get_image_info: img_info[0].name lglogo_image
611<6>[ 0.690468 / 01-01 00:00:00.689][1] [4720] get_image_info: img_info[1].name LGE_PM_NO_CHARGER
612<6>[ 0.690500 / 01-01 00:00:00.689][1] [4720] get_image_info: img_info[2].name LGE_PM_WEAK_CHARGING_ON
613<6>[ 0.690532 / 01-01 00:00:00.689][1] [4720] get_image_info: img_info[3].name LGE_PM_NO_BATTERY_ANI_01
614<6>[ 0.690564 / 01-01 00:00:00.689][1] [4720] get_image_info: img_info[4].name LGE_PM_NO_BATTERY_ANI_02
615<6>[ 0.690591 / 01-01 00:00:00.689][1] [4720] get_image_info: img_info[5].name downloadmode
616<6>[ 0.690622 / 01-01 00:00:00.689][1] [4720] get_image_info: img_info[6].name load_charger_image
617<6>[ 0.690655 / 01-01 00:00:00.689][1] [4720] get_image_info: img_info[7].name factory_reset_no_1st_image
618<6>[ 0.690683 / 01-01 00:00:00.689][1] [5760] get_image_info: img_info[0].name lglogo_image
619<6>[ 0.690712 / 01-01 00:00:00.689][1] [5760] get_image_info: img_info[1].name LGE_PM_NO_CHARGER
620<6>[ 0.690745 / 01-01 00:00:00.689][1] [5760] get_image_info: img_info[2].name LGE_PM_WEAK_CHARGING_ON
621<6>[ 0.690777 / 01-01 00:00:00.689][1] [5760] get_image_info: img_info[3].name LGE_PM_NO_BATTERY_ANI_01
622<6>[ 0.690809 / 01-01 00:00:00.689][1] [5760] get_image_info: img_info[4].name LGE_PM_NO_BATTERY_ANI_02
623<6>[ 0.690837 / 01-01 00:00:00.689][1] [5760] get_image_info: img_info[5].name downloadmode
624<6>[ 0.690867 / 01-01 00:00:00.689][1] [5760] get_image_info: img_info[6].name load_charger_image
625<6>[ 0.690900 / 01-01 00:00:00.689][1] [5760] get_image_info: img_info[7].name factory_reset_no_1st_image
626<6>[ 0.690933 / 01-01 00:00:00.689][1] [5760] get_image_info: img_info[8].name factory_reset_yes_1st_image
627<6>[ 0.690961 / 01-01 00:00:00.689][1] [6370] get_image_info: img_info[0].name lglogo_image
628<6>[ 0.690990 / 01-01 00:00:00.689][1] [6370] get_image_info: img_info[1].name LGE_PM_NO_CHARGER
629<6>[ 0.691024 / 01-01 00:00:00.689][1] [6370] get_image_info: img_info[2].name LGE_PM_WEAK_CHARGING_ON
630<6>[ 0.691056 / 01-01 00:00:00.689][1] [6370] get_image_info: img_info[3].name LGE_PM_NO_BATTERY_ANI_01
631<6>[ 0.691089 / 01-01 00:00:00.689][1] [6370] get_image_info: img_info[4].name LGE_PM_NO_BATTERY_ANI_02
632<6>[ 0.691117 / 01-01 00:00:00.689][1] [6370] get_image_info: img_info[5].name downloadmode
633<6>[ 0.691147 / 01-01 00:00:00.689][1] [6370] get_image_info: img_info[6].name load_charger_image
634<6>[ 0.691180 / 01-01 00:00:00.689][1] [6370] get_image_info: img_info[7].name factory_reset_no_1st_image
635<6>[ 0.691213 / 01-01 00:00:00.689][1] [6370] get_image_info: img_info[8].name factory_reset_yes_1st_image
636<6>[ 0.691246 / 01-01 00:00:00.689][1] [6370] get_image_info: img_info[9].name factory_reset_no_2nd_image
637<6>[ 0.691280 / 01-01 00:00:00.689][1] [6370] get_image_info: img_info[10].name factory_reset_yes_2nd_image
638<6>[ 0.691310 / 01-01 00:00:00.689][1] [6370] get_image_info: img_info[11].name imei_guide_image
639<6>[ 0.691339 / 01-01 00:00:00.689][1] [6370] get_image_info: img_info[12].name imei_main_image
640<6>[ 0.691369 / 01-01 00:00:00.689][1] [6370] get_image_info: img_info[13].name kswitch_factory
641<6>[ 0.691397 / 01-01 00:00:00.689][1] [6370] get_image_info: img_info[14].name kswitch_dload
642<6>[ 0.691426 / 01-01 00:00:00.689][1] [6370] get_image_info: img_info[15].name system_errlogo
643<6>[ 0.691457 / 01-01 00:00:00.689][1] [6370] get_image_info: img_info[16].name verifiedboot_red_01
644<6>[ 0.691488 / 01-01 00:00:00.689][1] [6370] get_image_info: img_info[17].name verifiedboot_red_02
645<6>[ 0.691520 / 01-01 00:00:00.689][1] [6370] get_image_info: img_info[18].name verifiedboot_orange_01
646<6>[ 0.691551 / 01-01 00:00:00.689][1] [6370] get_image_info: img_info[19].name verifiedboot_orange_02
647<6>[ 0.691583 / 01-01 00:00:00.689][1] [6370] get_image_info: img_info[20].name verifiedboot_yellow_01
648<6>[ 0.691615 / 01-01 00:00:00.689][1] [6370] get_image_info: img_info[21].name verifiedboot_yellow_02
649<6>[ 0.691638 / 01-01 00:00:00.689][1] [6370] get_image_info: Image not found
650<6>[ 0.691666 / 01-01 00:00:00.689][1] [6370] get_image_info: img_info[0].name lglogo_image
651<6>[ 0.691696 / 01-01 00:00:00.689][1] [6370] get_image_info: img_info[1].name LGE_PM_NO_CHARGER
652<6>[ 0.691728 / 01-01 00:00:00.689][1] [6370] get_image_info: img_info[2].name LGE_PM_WEAK_CHARGING_ON
653<6>[ 0.691760 / 01-01 00:00:00.689][1] [6370] get_image_info: img_info[3].name LGE_PM_NO_BATTERY_ANI_01
654<6>[ 0.691792 / 01-01 00:00:00.689][1] [6370] get_image_info: img_info[4].name LGE_PM_NO_BATTERY_ANI_02
655<6>[ 0.691820 / 01-01 00:00:00.689][1] [6370] get_image_info: img_info[5].name downloadmode
656<6>[ 0.691850 / 01-01 00:00:00.689][1] [6370] get_image_info: img_info[6].name load_charger_image
657<6>[ 0.691883 / 01-01 00:00:00.689][1] [6370] get_image_info: img_info[7].name factory_reset_no_1st_image
658<6>[ 0.691916 / 01-01 00:00:00.689][1] [6370] get_image_info: img_info[8].name factory_reset_yes_1st_image
659<6>[ 0.691949 / 01-01 00:00:00.689][1] [6370] get_image_info: img_info[9].name factory_reset_no_2nd_image
660<6>[ 0.691983 / 01-01 00:00:00.689][1] [6370] get_image_info: img_info[10].name factory_reset_yes_2nd_image
661<6>[ 0.692013 / 01-01 00:00:00.689][1] [6370] get_image_info: img_info[11].name imei_guide_image
662<6>[ 0.692042 / 01-01 00:00:00.689][1] [6370] get_image_info: img_info[12].name imei_main_image
663<6>[ 0.692071 / 01-01 00:00:00.689][1] [6370] get_image_info: img_info[13].name kswitch_factory
664<6>[ 0.692100 / 01-01 00:00:00.689][1] [6370] get_image_info: img_info[14].name kswitch_dload
665<6>[ 0.692129 / 01-01 00:00:00.689][1] [6370] get_image_info: img_info[15].name system_errlogo
666<6>[ 0.692160 / 01-01 00:00:00.689][1] [6370] get_image_info: img_info[16].name verifiedboot_red_01
667<6>[ 0.692190 / 01-01 00:00:00.689][1] [6370] get_image_info: img_info[17].name verifiedboot_red_02
668<6>[ 0.692222 / 01-01 00:00:00.689][1] [6370] get_image_info: img_info[18].name verifiedboot_orange_01
669<6>[ 0.692254 / 01-01 00:00:00.689][1] [6370] get_image_info: img_info[19].name verifiedboot_orange_02
670<6>[ 0.692286 / 01-01 00:00:00.689][1] [6370] get_image_info: img_info[20].name verifiedboot_yellow_01
671<6>[ 0.692318 / 01-01 00:00:00.689][1] [6370] get_image_info: img_info[21].name verifiedboot_yellow_02
672<6>[ 0.692341 / 01-01 00:00:00.689][1] [6370] get_image_info: Image not found
673<6>[ 0.692368 / 01-01 00:00:00.689][1] [6370] get_image_info: img_info[0].name lglogo_image
674<6>[ 0.692398 / 01-01 00:00:00.689][1] [6370] get_image_info: img_info[1].name LGE_PM_NO_CHARGER
675<6>[ 0.692430 / 01-01 00:00:00.689][1] [6370] get_image_info: img_info[2].name LGE_PM_WEAK_CHARGING_ON
676<6>[ 0.692462 / 01-01 00:00:00.689][1] [6370] get_image_info: img_info[3].name LGE_PM_NO_BATTERY_ANI_01
677<6>[ 0.692495 / 01-01 00:00:00.689][1] [6370] get_image_info: img_info[4].name LGE_PM_NO_BATTERY_ANI_02
678<6>[ 0.692522 / 01-01 00:00:00.689][1] [6370] get_image_info: img_info[5].name downloadmode
679<6>[ 0.692552 / 01-01 00:00:00.689][1] [6370] get_image_info: img_info[6].name load_charger_image
680<6>[ 0.692585 / 01-01 00:00:00.689][1] [6370] get_image_info: img_info[7].name factory_reset_no_1st_image
681<6>[ 0.692618 / 01-01 00:00:00.689][1] [6370] get_image_info: img_info[8].name factory_reset_yes_1st_image
682<6>[ 0.692651 / 01-01 00:00:00.689][1] [6370] get_image_info: img_info[9].name factory_reset_no_2nd_image
683<6>[ 0.692679 / 01-01 00:00:00.689][1] [7410] get_image_info: img_info[0].name lglogo_image
684<6>[ 0.692709 / 01-01 00:00:00.689][1] [7410] get_image_info: img_info[1].name LGE_PM_NO_CHARGER
685<6>[ 0.692741 / 01-01 00:00:00.689][1] [7410] get_image_info: img_info[2].name LGE_PM_WEAK_CHARGING_ON
686<6>[ 0.692773 / 01-01 00:00:00.689][1] [7410] get_image_info: img_info[3].name LGE_PM_NO_BATTERY_ANI_01
687<6>[ 0.692806 / 01-01 00:00:00.689][1] [7410] get_image_info: img_info[4].name LGE_PM_NO_BATTERY_ANI_02
688<6>[ 0.692834 / 01-01 00:00:00.689][1] [7410] get_image_info: img_info[5].name downloadmode
689<6>[ 0.692863 / 01-01 00:00:00.689][1] [7410] get_image_info: img_info[6].name load_charger_image
690<6>[ 0.692896 / 01-01 00:00:00.689][1] [7410] get_image_info: img_info[7].name factory_reset_no_1st_image
691<6>[ 0.692930 / 01-01 00:00:00.689][1] [7410] get_image_info: img_info[8].name factory_reset_yes_1st_image
692<6>[ 0.692963 / 01-01 00:00:00.689][1] [7410] get_image_info: img_info[9].name factory_reset_no_2nd_image
693<6>[ 0.692997 / 01-01 00:00:00.689][1] [7410] get_image_info: img_info[10].name factory_reset_yes_2nd_image
694<6>[ 0.693019 / 01-01 00:00:00.689][1] [8060] LGFTM_LAF_MID_REBOOT_FLAG is 0
695<6>[ 0.693039 / 01-01 00:00:00.689][1] [8060] [LAF] boot_into_laf = 0
696<6>[ 0.693060 / 01-01 00:00:00.689][1] [8060] LGE_DMS - CRC = 0 STAGE= 0
697<6>[ 0.693081 / 01-01 00:00:00.689][1] [8060] boot from recovery partition
698<6>[ 0.693100 / 01-01 00:00:00.689][1] [8060] Device is unlocked!
699<6>[ 0.693127 / 01-01 00:00:00.689][1] [8170] get_image_info: img_info[0].name lglogo_image
700<6>[ 0.693157 / 01-01 00:00:00.689][1] [8170] get_image_info: img_info[1].name LGE_PM_NO_CHARGER
701<6>[ 0.693189 / 01-01 00:00:00.689][1] [8170] get_image_info: img_info[2].name LGE_PM_WEAK_CHARGING_ON
702<6>[ 0.693221 / 01-01 00:00:00.689][1] [8170] get_image_info: img_info[3].name LGE_PM_NO_BATTERY_ANI_01
703<6>[ 0.693253 / 01-01 00:00:00.689][1] [8170] get_image_info: img_info[4].name LGE_PM_NO_BATTERY_ANI_02
704<6>[ 0.693281 / 01-01 00:00:00.689][1] [8170] get_image_info: img_info[5].name downloadmode
705<6>[ 0.693311 / 01-01 00:00:00.689][1] [8170] get_image_info: img_info[6].name load_charger_image
706<6>[ 0.693344 / 01-01 00:00:00.689][1] [8170] get_image_info: img_info[7].name factory_reset_no_1st_image
707<6>[ 0.693377 / 01-01 00:00:00.689][1] [8170] get_image_info: img_info[8].name factory_reset_yes_1st_image
708<6>[ 0.693410 / 01-01 00:00:00.689][1] [8170] get_image_info: img_info[9].name factory_reset_no_2nd_image
709<6>[ 0.693444 / 01-01 00:00:00.689][1] [8170] get_image_info: img_info[10].name factory_reset_yes_2nd_image
710<6>[ 0.693473 / 01-01 00:00:00.689][1] [8170] get_image_info: img_info[11].name imei_guide_image
711<6>[ 0.693502 / 01-01 00:00:00.689][1] [8170] get_image_info: img_info[12].name imei_main_image
712<6>[ 0.693532 / 01-01 00:00:00.689][1] [8170] get_image_info: img_info[13].name kswitch_factory
713<6>[ 0.693560 / 01-01 00:00:00.689][1] [8170] get_image_info: img_info[14].name kswitch_dload
714<6>[ 0.693589 / 01-01 00:00:00.689][1] [8170] get_image_info: img_info[15].name system_errlogo
715<6>[ 0.693620 / 01-01 00:00:00.689][1] [8170] get_image_info: img_info[16].name verifiedboot_red_01
716<6>[ 0.693651 / 01-01 00:00:00.689][1] [8170] get_image_info: img_info[17].name verifiedboot_red_02
717<6>[ 0.693682 / 01-01 00:00:00.689][1] [8170] get_image_info: img_info[18].name verifiedboot_orange_01
718<6>[ 0.693714 / 01-01 00:00:00.689][1] [8170] get_image_info: img_info[19].name verifiedboot_orange_02
719<6>[ 0.693728 / 01-01 00:00:00.689][1] [8190] EIO !!!
720<6>[ 0.693755 / 01-01 00:00:00.689][1] [8700] <8>keymaster: "\"cmd_id=KEYMASTER_SET_ROT\""
721<6>[ 0.693772 / 01-01 00:00:00.689][1] [8710] No unlock key!
722<6>[ 0.693802 / 01-01 00:00:00.689][1] [8730] <8>keymaster: "\"cmd_id=KEYMASTER_MILESTONE_CALL\""
723<6>[ 0.693824 / 01-01 00:00:00.689][1] [8730] Qseecom De-Init Done in Appsbl
724<6>[ 0.693843 / 01-01 00:00:00.689][1] [8730] Channel alloc freed
725<6>[ 0.693851 / 01-01 00:00:00.689][1]
726<6>[ 0.693860 / 01-01 00:00:00.689][1] bootlog_probe: token (null)
727<6>[ 0.693869 / 01-01 00:00:00.689][1] -------------------------------------------------
728<4>[ 0.693881 / 01-01 00:00:00.689][1] Trying to free nonexistent resource <00000000affc0000-00000000affdffff>
729<6>[ 0.694431 / 01-01 00:00:00.689][1] [QFUSE]lge_qfprom_probe : qfprom init
730<6>[ 0.694943 / 01-01 00:00:00.689][1] msm_serial_hs module loaded
731<4>[ 0.697491 / 01-01 00:00:00.689][1] diag: In diag_create_build_time_mask, table 0 has more ssid than max, ssid_first: 0, ssid_last: 118
732<4>[ 0.697512 / 01-01 00:00:00.689][1] diag: In diag_create_build_time_mask, table 23 has more ssid than max, ssid_first: 10400, ssid_last: 10415
733<6>[ 0.702245 / 01-01 00:00:00.699][1] lge_bypass_init
734<6>[ 0.702307 / 01-01 00:00:00.699][1] lge_bypass_init: success
735<6>[ 0.702320 / 01-01 00:00:00.699][1] DM_APP: lge_dm_tty_init
736<6>[ 0.710444 / 01-01 00:00:00.709][1] brd: module loaded
737<6>[ 0.712272 / 01-01 00:00:00.709][1] loop: module loaded
738<6>[ 0.712536 / 01-01 00:00:00.709][1] zram: Created 1 device(s) ...
739<6>[ 0.712841 / 01-01 00:00:00.709][1] QSEECOM: qseecom_probe: qseecom.qsee_version = 0x1000000
740<4>[ 0.712872 / 01-01 00:00:00.709][1] QSEECOM: qseecom_retrieve_ce_data: Device does not support PFE
741<6>[ 0.712883 / 01-01 00:00:00.709][1] QSEECOM: qseecom_probe: qseecom clocks handled by other subsystem
742<4>[ 0.712895 / 01-01 00:00:00.709][1] QSEECOM: qseecom_probe: qsee reentrancy support phase is not defined, setting to default 0
743<4>[ 0.713376 / 01-01 00:00:00.709][1] QSEECOM: qseecom_probe: qseecom.whitelist_support = 1
744<4>[ 0.714602 / 01-01 00:00:00.709][1] i2c-core: driver [tabla-i2c-core] using legacy suspend method
745<4>[ 0.714613 / 01-01 00:00:00.709][1] i2c-core: driver [tabla-i2c-core] using legacy resume method
746<4>[ 0.714695 / 01-01 00:00:00.709][1] i2c-core: driver [wcd9xxx-i2c-core] using legacy suspend method
747<4>[ 0.714704 / 01-01 00:00:00.709][1] i2c-core: driver [wcd9xxx-i2c-core] using legacy resume method
748<4>[ 0.714785 / 01-01 00:00:00.709][1] i2c-core: driver [tasha-i2c-core] using legacy suspend method
749<4>[ 0.714794 / 01-01 00:00:00.709][1] i2c-core: driver [tasha-i2c-core] using legacy resume method
750<6>[ 0.715105 / 01-01 00:00:00.709][1] Loading PN547 driver
751<6>[ 0.715139 / 01-01 00:00:00.709][5] pn547: Start async init
752<6>[ 0.715207 / 01-01 00:00:00.709][5] pn547: pn547_probe() start
753<6>[ 0.715245 / 01-01 00:00:00.709][5] pn547:IRQ : 13
754<6>[ 0.715245 / 01-01 00:00:00.709][5] VEN : 16
755<6>[ 0.715245 / 01-01 00:00:00.709][5] FIRM : 130
756<6>[ 0.715332 / 01-01 00:00:00.709][1] QCE50: __qce_get_device_tree_data: BAM Apps EE is not defined, setting to default 1
757<6>[ 0.715387 / 01-01 00:00:00.709][5] pn547_probe : requesting IRQ 171
758<6>[ 0.715472 / 01-01 00:00:00.709][5] pn547: pn547_probe() end
759<6>[ 0.715506 / 01-01 00:00:00.709][5] pn547: Loading PN547 driver Success!
760<6>[ 0.715973 / 01-01 00:00:00.709][1] qce 720000.qcedev: Qualcomm Crypto 5.3.3 device found @0x720000
761<6>[ 0.715990 / 01-01 00:00:00.709][1] qce 720000.qcedev: CE device = 0x0
762<6>[ 0.715990 / 01-01 00:00:00.709][1] , IO base, CE = 0xf0b80000
763<6>[ 0.715990 / 01-01 00:00:00.709][1] , Consumer (IN) PIPE 2, Producer (OUT) PIPE 3
764<6>[ 0.715990 / 01-01 00:00:00.709][1] IO base BAM = 0x (null)
765<6>[ 0.715990 / 01-01 00:00:00.709][1] BAM IRQ 53
766<6>[ 0.715990 / 01-01 00:00:00.709][1] Engines Availability = 0x2010853
767<6>[ 0.716204 / 01-01 00:00:00.709][1] sps:BAM 0x00704000 is registered.
768<6>[ 0.716395 / 01-01 00:00:00.709][1] sps:BAM 0x00704000 (va:0xf0cc0000) enabled: ver:0x27, number of pipes:8
769<6>[ 0.716641 / 01-01 00:00:00.709][1] QCE50: qce_sps_init: Qualcomm MSM CE-BAM at 0x0000000000704000 irq 53
770<6>[ 0.719236 / 01-01 00:00:00.709][1] QCE50: __qce_get_device_tree_data: BAM Apps EE is not defined, setting to default 1
771<6>[ 0.719893 / 01-01 00:00:00.709][1] qcrypto 720000.qcrypto: Qualcomm Crypto 5.3.3 device found @0x720000
772<6>[ 0.719909 / 01-01 00:00:00.709][1] qcrypto 720000.qcrypto: CE device = 0x0
773<6>[ 0.719909 / 01-01 00:00:00.709][1] , IO base, CE = 0xf0dc0000
774<6>[ 0.719909 / 01-01 00:00:00.709][1] , Consumer (IN) PIPE 4, Producer (OUT) PIPE 5
775<6>[ 0.719909 / 01-01 00:00:00.709][1] IO base BAM = 0x (null)
776<6>[ 0.719909 / 01-01 00:00:00.709][1] BAM IRQ 53
777<6>[ 0.719909 / 01-01 00:00:00.709][1] Engines Availability = 0x2010853
778<6>[ 0.720293 / 01-01 00:00:00.719][1] QCE50: qce_sps_init: Qualcomm MSM CE-BAM at 0x0000000000704000 irq 53
779<6>[ 0.722359 / 01-01 00:00:00.719][1] qcrypto 720000.qcrypto: qcrypto-ecb-aes
780<6>[ 0.722474 / 01-01 00:00:00.719][1] qcrypto 720000.qcrypto: qcrypto-cbc-aes
781<6>[ 0.722586 / 01-01 00:00:00.719][1] qcrypto 720000.qcrypto: qcrypto-ctr-aes
782<6>[ 0.722695 / 01-01 00:00:00.719][1] qcrypto 720000.qcrypto: qcrypto-ecb-des
783<6>[ 0.722806 / 01-01 00:00:00.719][1] qcrypto 720000.qcrypto: qcrypto-cbc-des
784<6>[ 0.722917 / 01-01 00:00:00.719][1] qcrypto 720000.qcrypto: qcrypto-ecb-3des
785<6>[ 0.723028 / 01-01 00:00:00.719][1] qcrypto 720000.qcrypto: qcrypto-cbc-3des
786<6>[ 0.723138 / 01-01 00:00:00.719][1] qcrypto 720000.qcrypto: qcrypto-xts-aes
787<6>[ 0.723249 / 01-01 00:00:00.719][1] qcrypto 720000.qcrypto: qcrypto-sha1
788<6>[ 0.723359 / 01-01 00:00:00.719][1] qcrypto 720000.qcrypto: qcrypto-sha256
789<6>[ 0.723473 / 01-01 00:00:00.719][1] qcrypto 720000.qcrypto: qcrypto-aead-hmac-sha1-cbc-aes
790<6>[ 0.723593 / 01-01 00:00:00.719][1] qcrypto 720000.qcrypto: qcrypto-aead-hmac-sha1-cbc-des
791<6>[ 0.723707 / 01-01 00:00:00.719][1] qcrypto 720000.qcrypto: qcrypto-aead-hmac-sha1-cbc-3des
792<6>[ 0.723819 / 01-01 00:00:00.719][1] qcrypto 720000.qcrypto: qcrypto-aead-hmac-sha256-cbc-aes
793<6>[ 0.723935 / 01-01 00:00:00.719][1] qcrypto 720000.qcrypto: qcrypto-aead-hmac-sha256-cbc-des
794<6>[ 0.724048 / 01-01 00:00:00.719][1] qcrypto 720000.qcrypto: qcrypto-aead-hmac-sha256-cbc-3des
795<6>[ 0.724160 / 01-01 00:00:00.719][1] qcrypto 720000.qcrypto: qcrypto-hmac-sha1
796<6>[ 0.724274 / 01-01 00:00:00.719][1] qcrypto 720000.qcrypto: qcrypto-hmac-sha256
797<6>[ 0.724386 / 01-01 00:00:00.719][1] qcrypto 720000.qcrypto: qcrypto-aes-ccm
798<6>[ 0.724499 / 01-01 00:00:00.719][1] qcrypto 720000.qcrypto: qcrypto-rfc4309-aes-ccm
799<3>[ 0.725175 / 01-01 00:00:00.719][1] qcom_ice_get_device_tree_data: No vdd-hba-supply regulator, assuming not needed
800<6>[ 0.725273 / 01-01 00:00:00.719][1] ICE IRQ = 55
801<6>[ 0.726054 / 01-01 00:00:00.719][1] SCSI Media Changer driver v0.25
802<6>[ 0.728352 / 01-01 00:00:00.719][1] tun: Universal TUN/TAP device driver, 1.6
803<6>[ 0.728363 / 01-01 00:00:00.719][1] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
804<6>[ 0.729985 / 01-01 00:00:00.719][1] PPP generic driver version 2.4.2
805<6>[ 0.730104 / 01-01 00:00:00.729][1] PPP BSD Compression module registered
806<6>[ 0.730118 / 01-01 00:00:00.729][1] PPP Deflate Compression module registered
807<6>[ 0.730140 / 01-01 00:00:00.729][1] PPP MPPE Compression module registered
808<6>[ 0.730159 / 01-01 00:00:00.729][1] NET: Registered protocol family 24
809<3>[ 0.730619 / 01-01 00:00:00.729][1] wcnss: wcnss_wlan_probe()
810<6>[ 0.730649 / 01-01 00:00:00.729][1] wcnss_wlan probed in built-in mode
811<6>[ 0.731215 / 01-01 00:00:00.729][1] usbcore: registered new interface driver asix
812<6>[ 0.731291 / 01-01 00:00:00.729][1] usbcore: registered new interface driver ax88179_178a
813<6>[ 0.731336 / 01-01 00:00:00.729][1] usbcore: registered new interface driver cdc_ether
814<6>[ 0.731380 / 01-01 00:00:00.729][1] usbcore: registered new interface driver net1080
815<6>[ 0.731423 / 01-01 00:00:00.729][1] usbcore: registered new interface driver cdc_subset
816<6>[ 0.731464 / 01-01 00:00:00.729][1] usbcore: registered new interface driver zaurus
817<6>[ 0.731632 / 01-01 00:00:00.729][1] usbcore: registered new interface driver cdc_ncm
818<3>[ 0.732992 / 01-01 00:00:00.729][1] scm_call failed: func id 0x2000c16, ret: -1, syscall returns: 0x0, 0x0, 0x0
819<6>[ 0.733003 / 01-01 00:00:00.729][1] hyp_assign_table: Failed to assign memory protection, ret = -5
820<3>[ 0.733015 / 01-01 00:00:00.729][1] msm_sharedmem: setup_shared_ram_perms: hyp_assign_phys failed IPA=0x0160xfdc00000 size=1572864 err=-5
821<6>[ 0.733123 / 01-01 00:00:00.729][1] msm_sharedmem: msm_sharedmem_probe: Device created for client 'rmtfs'
822<6>[ 0.733429 / 01-01 00:00:00.729][1] msm_otg 78db000.usb: msm_otg probe
823<6>[ 0.735209 / 01-01 00:00:00.729][1] msm_sharedmem: sharedmem_register_qmi: qmi init successful
824<6>[ 0.736679 / 01-01 00:00:00.729][1] msm_otg 78db000.usb: OTG regs = f03ca000
825<6>[ 0.740798 / 01-01 00:00:00.739][1] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
826<6>[ 0.740814 / 01-01 00:00:00.739][1] ehci-msm: Qualcomm On-Chip EHCI Host Controller
827<3>[ 0.741139 / 01-01 00:00:00.739][1] Unable to get vbus_otg
828<3>[ 0.741152 / 01-01 00:00:00.739][1] msm_hsusb_host msm_hsusb_host: unable to register with transceiver
829<6>[ 0.741240 / 01-01 00:00:00.739][1] usbcore: registered new interface driver cdc_acm
830<6>[ 0.741250 / 01-01 00:00:00.739][1] cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters
831<6>[ 0.741301 / 01-01 00:00:00.739][1] usbcore: registered new interface driver usb-storage
832<6>[ 0.741338 / 01-01 00:00:00.739][1] usbcore: registered new interface driver ums-alauda
833<6>[ 0.741374 / 01-01 00:00:00.739][1] usbcore: registered new interface driver ums-cypress
834<6>[ 0.741411 / 01-01 00:00:00.739][1] usbcore: registered new interface driver ums-datafab
835<6>[ 0.741448 / 01-01 00:00:00.739][1] usbcore: registered new interface driver ums-freecom
836<6>[ 0.741484 / 01-01 00:00:00.739][1] usbcore: registered new interface driver ums-isd200
837<6>[ 0.741521 / 01-01 00:00:00.739][1] usbcore: registered new interface driver ums-jumpshot
838<6>[ 0.741557 / 01-01 00:00:00.739][1] usbcore: registered new interface driver ums-karma
839<6>[ 0.741598 / 01-01 00:00:00.739][1] usbcore: registered new interface driver ums-onetouch
840<6>[ 0.741637 / 01-01 00:00:00.739][1] usbcore: registered new interface driver ums-sddr09
841<6>[ 0.741675 / 01-01 00:00:00.739][1] usbcore: registered new interface driver ums-sddr55
842<6>[ 0.741712 / 01-01 00:00:00.739][1] usbcore: registered new interface driver ums-usbat
843<6>[ 0.741796 / 01-01 00:00:00.739][1] usbcore: registered new interface driver usbserial
844<6>[ 0.741839 / 01-01 00:00:00.739][1] usbcore: registered new interface driver usb_ehset_test
845<6>[ 0.742411 / 01-01 00:00:00.739][1] gbridge_init: gbridge_init successs.
846<6>[ 0.742845 / 01-01 00:00:00.739][1] u_lgeusb init
847<6>[ 0.743211 / 01-01 00:00:00.739][1] mousedev: PS/2 mouse device common for all mice
848<6>[ 0.743370 / 01-01 00:00:00.739][1] usbcore: registered new interface driver xpad
849<3>[ 0.743384 / 01-01 00:00:00.739][1] [TOUCH][F][I2C] touch_i2c_init()
850<3>[ 0.743393 / 01-01 00:00:00.739][1] [TOUCH][L][MISC] Touch Module Get. Module index = 0
851<3>[ 0.743565 / 01-01 00:00:00.739][1] [TOUCH][F][I2C] touch_i2c_probe()
852<6>[ 0.744200 / 01-01 00:00:00.739][1] qcom,qpnp-rtc qpnp-rtc-7: rtc core: registered qpnp_rtc as rtc0
853<6>[ 0.744356 / 01-01 00:00:00.739][1] i2c /dev entries driver
854<3>[ 0.748297 / 01-01 00:00:00.739][1] /soc/qcom,cam_smmu/msm_cam_smmu_cb1: could not get #iommu-cells for /soc/qcom,iommu@1e00000
855<3>[ 0.748541 / 01-01 00:00:00.739][1] /soc/qcom,cam_smmu/msm_cam_smmu_cb3: could not get #iommu-cells for /soc/qcom,iommu@1e00000
856<3>[ 0.748770 / 01-01 00:00:00.739][1] /soc/qcom,cam_smmu/msm_cam_smmu_cb4: could not get #iommu-cells for /soc/qcom,iommu@1e00000
857<3>[ 0.750936 / 01-01 00:00:00.749][1] msm_camera_get_dt_vreg_data:1133 number of entries is 0 or not present in dts
858<3>[ 0.755149 / 01-01 00:00:00.749][1] msm_camera_get_dt_vreg_data:1133 number of entries is 0 or not present in dts
859<3>[ 0.756257 / 01-01 00:00:00.749][1] msm_camera_get_dt_vreg_data:1133 number of entries is 0 or not present in dts
860<3>[ 0.757358 / 01-01 00:00:00.749][1] msm_camera_get_dt_vreg_data:1133 number of entries is 0 or not present in dts
861<3>[ 0.757866 / 01-01 00:00:00.749][1] msm_camera_pinctrl_init:1295 Getting pinctrl handle failed
862<3>[ 0.757877 / 01-01 00:00:00.749][1] msm_actuator_platform_probe:1954 ERR:msm_actuator_platform_probe: Error in reading actuator pinctrl
863<4>[ 0.757958 / 01-01 00:00:00.749][1] qcom,actuator: probe of 1b0c000.qcom,cci:qcom,actuator@0 failed with error -22
864<6>[ 0.765202 / 01-01 00:00:00.759][1] msm_cci_init:1381: hw_version = 0x10020004
865<3>[ 0.765237 / 01-01 00:00:00.759][1] qcom,slave-addr = 0xA1
866<3>[ 0.773106 / 01-01 00:00:00.769][1] qcom,slave-addr = 0xA3
867<3>[ 0.780971 / 01-01 00:00:00.779][1] qcom,slave-addr = 0xA5
868<3>[ 0.788830 / 01-01 00:00:00.779][1] qcom,slave-addr = 0xA7
869<3>[ 0.796808 / 01-01 00:00:00.789][4] qcom,slave-addr = 0xA9
870<3>[ 0.804789 / 01-01 00:00:00.799][4] qcom,slave-addr = 0xAB
871<3>[ 0.812737 / 01-01 00:00:00.809][4] qcom,slave-addr = 0xAD
872<3>[ 0.820642 / 01-01 00:00:00.819][4] qcom,slave-addr = 0xAF
873<3>[ 0.828567 / 01-01 00:00:00.819][4] msm_eeprom_checksum, e_ctrl->cal_data.num_data = 0x0800
874<3>[ 0.828580 / 01-01 00:00:00.819][4] msm_eeprom_checksum_lgit eeprom_ver = 0xFF
875<3>[ 0.828595 / 01-01 00:00:00.819][4] EEPROM data verified
876<3>[ 0.828607 / 01-01 00:00:00.819][4] msm_eeprom_platform_probe:main_sensor_id 0x1
877<0>[ 0.834159 / 01-01 00:00:00.829][6] drv probe : 758 qcom,eeprom 75
878<6>[ 0.842338 / 01-01 00:00:00.839][6] MSM-CPP cpp_init_hardware:863 CPP HW Version: 0x40030002
879<3>[ 0.842357 / 01-01 00:00:00.839][6] MSM-CPP cpp_init_hardware:881 stream_cnt:0
880<3>[ 0.857440 / 01-01 00:00:00.849][6] __msm_jpeg_init:1537] Jpeg Device id 0
881<3>[ 0.859964 / 01-01 00:00:00.849][6] lge_battery_id soc:lge,battery-id: LGE Battery ID Checker started
882<6>[ 0.859984 / 01-01 00:00:00.849][6] [FG_EST] battery num 6
883<6>[ 0.859997 / 01-01 00:00:00.849][6] [FG_EST] battery array 1 index = [0] id = [0]
884<6>[ 0.860008 / 01-01 00:00:00.849][6] [FG_EST] battery array 1 index = [1] id = [1]
885<6>[ 0.860020 / 01-01 00:00:00.849][6] [FG_EST] battery array 1 index = [2] id = [130]
886<6>[ 0.860031 / 01-01 00:00:00.849][6] [FG_EST] battery array 1 index = [3] id = [147]
887<6>[ 0.860042 / 01-01 00:00:00.849][6] [FG_EST] battery array 1 index = [4] id = [187]
888<6>[ 0.860134 / 01-01 00:00:00.859][0] [FG_EST] battery array 1 index = [5] id = [204]
889<6>[ 0.860146 / 01-01 00:00:00.859][0] [FG_EST] battery cell type [LGE_BL45B1F_LGC_3000mAh]
890<6>[ 0.860155 / 01-01 00:00:00.859][0] [FG_EST] battery cell type [LGE_BL45B1F_LGC_3000mAh]
891<6>[ 0.860164 / 01-01 00:00:00.859][0] [FG_EST] battery cell type [LGE_BL45B1F_Tocad_3000mAh]
892<6>[ 0.860173 / 01-01 00:00:00.859][0] [FG_EST] battery cell type [LGE_BL45B1F_LGC_3000mAh]
893<6>[ 0.860182 / 01-01 00:00:00.859][0] [FG_EST] battery cell type [LGE_BL45B1F_LGC_3000mAh]
894<6>[ 0.860191 / 01-01 00:00:00.859][0] [FG_EST] battery cell type [LGE_BL45B1F_Tocad_3000mAh]
895<6>[ 0.860207 / 01-01 00:00:00.859][0] Battery was read in sbl is = 204
896<6>[ 0.860680 / 01-01 00:00:00.859][0] FG: fg_of_init: battery aging mode: 2
897<6>[ 0.860695 / 01-01 00:00:00.859][0] FG: fg_of_init: Using external sense
898<6>[ 0.860710 / 01-01 00:00:00.859][0] FG: fg_of_init: lge_rid_disable : 0
899<6>[ 0.860735 / 01-01 00:00:00.859][0] FG: fg_of_init: slope-limiter, temp: 100 coeffs: [14 6 14 6]
900<6>[ 0.860761 / 01-01 00:00:00.859][0] FG: fg_dischg_gain_dt_init: [FG_EST]:SOC:7 MedC_Gain:5 HighC_Gain: 5
901<6>[ 0.860771 / 01-01 00:00:00.859][0] FG: fg_dischg_gain_dt_init: [FG_EST]:SOC:15 MedC_Gain:4 HighC_Gain: 5
902<6>[ 0.860781 / 01-01 00:00:00.859][0] FG: fg_dischg_gain_dt_init: [FG_EST]:SOC:20 MedC_Gain:4 HighC_Gain: 4
903<6>[ 0.860800 / 01-01 00:00:00.859][0] FG: fg_of_init: batt-temp-low_limit: -600 batt-temp-high_limit: 1500
904<6>[ 0.860811 / 01-01 00:00:00.859][0] FG: fg_of_init: cc-soc-limit-pct: 120
905<6>[ 0.860833 / 01-01 00:00:00.859][0] FG: fg_of_init: slope-limiter, temp: 100 coeffs: [14 6 14 6]
906<6>[ 0.860860 / 01-01 00:00:00.859][0] FG: fg_dischg_gain_dt_init: [FG_EST]:SOC:7 MedC_Gain:5 HighC_Gain: 5
907<6>[ 0.860869 / 01-01 00:00:00.859][0] FG: fg_dischg_gain_dt_init: [FG_EST]:SOC:15 MedC_Gain:4 HighC_Gain: 5
908<6>[ 0.860879 / 01-01 00:00:00.859][0] FG: fg_dischg_gain_dt_init: [FG_EST]:SOC:20 MedC_Gain:4 HighC_Gain: 4
909<6>[ 0.860895 / 01-01 00:00:00.859][0] FG: fg_of_init: batt-temp-low_limit: -600 batt-temp-high_limit: 1500
910<6>[ 0.860906 / 01-01 00:00:00.859][0] FG: fg_of_init: cc-soc-limit-pct: 120
911<6>[ 0.860918 / 01-01 00:00:00.859][0] FG: fg_of_init: restore: 0 validate_by_ocv: 0 range_pct: 0
912<6>[ 0.861599 / 01-01 00:00:00.859][0] FG: fg_age_detection: battery age not init
913<6>[ 0.861938 / 01-01 00:00:00.859][0] FG: fg_age_detection: battery age not init
914<6>[ 0.862025 / 01-01 00:00:00.859][0] FG: fg_probe: rbias software control : 0
915<6>[ 0.862040 / 01-01 00:00:00.859][0] FG: update_iterm: current = -200, converted_raw = fae2, data = e2 fa
916<6>[ 0.862148 / 01-01 00:00:00.859][0] FG: fg_probe: FG Probe success - FG Revision DIG:3.1 ANA:1.2 PMIC subtype=17
917<6>[ 0.862239 / 01-01 00:00:00.859][0] FG: fg_age_detection: battery age not init
918<6>[ 0.862262 / 01-01 00:00:00.859][0] FG: fg_batt_print_work: [FG_INFO]:RS=0x0, BS=0, QS=0, SOC=50, Rem=0, Voltage=0mV,OCV=0mV, Current=0mA, Temp=20, Age=1, cycle=0
919<6>[ 0.862397 / 01-01 00:00:00.859][0] FG: update_cutoff_voltage: voltage = 3200, converted_raw = 51eb, data = eb 51
920<3>[ 0.863641 / 01-01 00:00:00.859][0] qpnp-smbcharger qpnp-smbcharger-17: node /soc/qcom,spmi@200f000/qcom,pmi8950@2/qcom,qpnp-smbcharger IO resource absent!
921<6>[ 0.864010 / 01-01 00:00:00.859][0] SMBCHG: smbchg_check_chg_version: pmic=PMI8950, wa_flags=0x4e, hvdcp_supported=true
922<6>[ 0.864081 / 01-01 00:00:00.859][0] SMBCHG: smb_parse_dt: parallel usb thr: 1400, 9v thr: 900
923<6>[ 0.864224 / 01-01 00:00:00.859][0] FG: set_prop_sense_type: [FG_OPTION]sensor type = 1
924<6>[ 0.864354 / 01-01 00:00:00.859][0] SMBCHG: smb_parse_dt: soc recharging is enabled
925<6>[ 0.864816 / 01-01 00:00:00.859][0] smbcharger_charger_otg: no parameters
926<6>[ 0.865456 / 01-01 00:00:00.859][0] SMBCHG: smbchg_hw_init: Charger Revision DIG: 0.0; ANA: 0.1
927<3>[ 0.865469 / 01-01 00:00:00.859][0] SMBCHG: smbchg_hvdcp_enable_cb: smbchg_hvdcp_enable_cb enable 0 last_enable 0
928<6>[ 0.865544 / 01-01 00:00:00.859][0] SMBCHG: smbchg_set_aicl_rerun_period_s: aicl rerun period set to 180s
929<6>[ 0.866943 / 01-01 00:00:00.859][0] SMBCHG: smbchg_hw_init: set vfloat to 4400
930<6>[ 0.867018 / 01-01 00:00:00.859][0] SMBCHG: smbchg_iterm_set: set tcc (100) to 0x02
931<6>[ 0.867484 / 01-01 00:00:00.859][0] SMBCHG: smbchg_vfloat_adjust_check: Starting vfloat adjustments
932<6>[ 0.867691 / 01-01 00:00:00.859][0] SMBCHG: smbchg_vfloat_adjust_work: Stopping vfloat adj taper=0 parallel_ma = 0
933<6>[ 0.868549 / 01-01 00:00:00.859][0] SMBCHG: smbchg_set_fastchg_current_raw: fastcharge current requested 1200, set to 1200
934<6>[ 0.869594 / 01-01 00:00:00.859][0] SMBCHG: batt_pres_handler: triggered: 0x00
935<6>[ 0.869605 / 01-01 00:00:00.859][0] SMBCHG: smbchg_vfloat_adjust_check: Starting vfloat adjustments
936<6>[ 0.869660 / 01-01 00:00:00.859][0] SMBCHG: smbchg_vfloat_adjust_work: Stopping vfloat adj taper=0 parallel_ma = 0
937<6>[ 0.869942 / 01-01 00:00:00.859][0] SMBCHG: batt_hot_handler: triggered: 0x00
938<6>[ 0.870114 / 01-01 00:00:00.869][1] SMBCHG: smbchg_vfloat_adjust_check: Starting vfloat adjustments
939<6>[ 0.870155 / 01-01 00:00:00.869][1] SMBCHG: smbchg_vfloat_adjust_work: Stopping vfloat adj taper=0 parallel_ma = 0
940<6>[ 0.870343 / 01-01 00:00:00.869][0] SMBCHG: batt_warm_handler: triggered: 0x00
941<6>[ 0.870704 / 01-01 00:00:00.869][0] SMBCHG: batt_cool_handler: triggered: 0x00
942<6>[ 0.870727 / 01-01 00:00:00.869][0] SMBCHG: batt_cold_handler: triggered: 0x00
943<6>[ 0.870898 / 01-01 00:00:00.869][0] SMBCHG: smbchg_vfloat_adjust_check: Starting vfloat adjustments
944<6>[ 0.871092 / 01-01 00:00:00.869][0] SMBCHG: smbchg_vfloat_adjust_work: Stopping vfloat adj taper=0 parallel_ma = 0
945<6>[ 0.871277 / 01-01 00:00:00.869][0] SMBCHG: usbid_change_handler: triggered
946<6>[ 0.871295 / 01-01 00:00:00.869][0] SMBCHG: usbid_change_handler: setting usb psy OTG = 0
947<6>[ 0.871516 / 01-01 00:00:00.869][5] msm_otg 78db000.usb: ID status_w
948<6>[ 0.871530 / 01-01 00:00:00.869][5] ID set
949<6>[ 0.872225 / 01-01 00:00:00.869][0] SMBCHG: handle_usb_removal: triggered
950<6>[ 0.872243 / 01-01 00:00:00.869][0] SMBCHG: smbchg_change_usb_supply_type: Type 0: setting mA = 0
951<6>[ 0.872254 / 01-01 00:00:00.869][0] SMBCHG: smbchg_set_usb_current_max: USB current_ma = 0
952<6>[ 0.872437 / 01-01 00:00:00.869][0] SMBCHG: smbchg_set_usb_current_max: usb type = 0 current set to 0 mA
953<6>[ 0.873193 / 01-01 00:00:00.869][0] SMBCHG: handle_usb_removal: setting usb psy present = 0
954<6>[ 0.873276 / 01-01 00:00:00.869][0] FG: fg_common_hw_init: ESR extract is enabled
955<6>[ 0.873583 / 01-01 00:00:00.869][0] SMBCHG: set_usb_psy_dp_dm: setting usb psy dp dm = 9
956<6>[ 0.873600 / 01-01 00:00:00.869][0] SMBCHG: handle_usb_removal: setting usb psy health UNKNOWN
957<6>[ 0.873664 / 01-01 00:00:00.869][0] FG: fg_common_hw_init: imptr_pulse_slow is enabled
958<6>[ 0.873969 / 01-01 00:00:00.869][0] SMBCHG: smbchg_usb_update_online_work: setting usb psy online = 0
959<6>[ 0.874051 / 01-01 00:00:00.869][0] FG: fg_common_hw_init: rslow_comp active is disabled
960<6>[ 0.874466 / 01-01 00:00:00.869][0] FG: fg_common_hw_init: rslow_comp active is disabled
961<6>[ 0.875496 / 01-01 00:00:00.869][0] FG: fg_age_detection: battery age not init
962<6>[ 0.875524 / 01-01 00:00:00.869][0] SMBCHG: smbchg_calc_max_flash_current: avail_iflash=-19796412, ocv=-22, ibat=922656, rbatt=99978
963<6>[ 0.875972 / 01-01 00:00:00.869][0] FG: fg_age_detection: battery age not init
964<6>[ 0.875997 / 01-01 00:00:00.869][0] SMBCHG: smbchg_calc_max_flash_current: avail_iflash=-19796412, ocv=-22, ibat=922656, rbatt=99978
965<3>[ 0.878621 / 01-01 00:00:00.869][1] qpnp-smbcharger qpnp-smbcharger-17: node /soc/qcom,spmi@200f000/qcom,pmi8950@2/qcom,qpnp-smbcharger IO resource absent!
966<6>[ 0.878656 / 01-01 00:00:00.869][1] SMBCHG: smbchg_probe: setting usb psy present = 0
967<6>[ 0.878698 / 01-01 00:00:00.869][1] SMBCHG: smbchg_config_chg_battery_type: Battery-type not identified
968<6>[ 0.878717 / 01-01 00:00:00.869][1] SMBCHG: read_usb_type: src det low
969<6>[ 0.878728 / 01-01 00:00:00.869][1] SMBCHG: smbchg_vfloat_adjust_check: Starting vfloat adjustments
970<6>[ 0.878778 / 01-01 00:00:00.869][1] SMBCHG: smbchg_vfloat_adjust_work: Stopping vfloat adj taper=0 parallel_ma = 0
971<6>[ 0.878907 / 01-01 00:00:00.869][1] FG: fg_age_detection: battery age not init
972<6>[ 0.878931 / 01-01 00:00:00.869][1] SMBCHG: smbchg_calc_max_flash_current: avail_iflash=-19796412, ocv=-22, ibat=922656, rbatt=99978
973<3>[ 0.879644 / 01-01 00:00:00.869][1] SMBCHG: vadc_set_work: failed to initialize vadc
974<6>[ 0.879667 / 01-01 00:00:00.869][1] qpnp-smbcharger qpnp-smbcharger-17: SMBCHG successfully probe Charger version=SCHG_LITE Revision DIG:0.0 ANA:0.1 batt=1 dc=0 usb=0
975<3>[ 0.880419 / 01-01 00:00:00.879][1] unable to find DT imem DLOAD mode node
976<3>[ 0.880758 / 01-01 00:00:00.879][1] unable to find DT imem EDLOAD mode node
977<4>[ 0.881920 / 01-01 00:00:00.879][1] thermal thermal_zone2: failed to read out thermal zone 2
978<4>[ 0.882112 / 01-01 00:00:00.879][1] thermal thermal_zone3: failed to read out thermal zone 3
979<4>[ 0.882311 / 01-01 00:00:00.879][1] thermal thermal_zone4: failed to read out thermal zone 4
980<4>[ 0.882506 / 01-01 00:00:00.879][1] thermal thermal_zone5: failed to read out thermal zone 5
981<3>[ 0.882972 / 01-01 00:00:00.879][1] qpnp_vadc_read: Error reading die_temp
982<6>[ 0.903493 / 01-01 00:00:00.899][1] device-mapper: ioctl: 4.28.0-ioctl (2014-09-17) initialised: dm-devel@redhat.com
983<6>[ 0.903608 / 01-01 00:00:00.899][1] device-mapper: req-crypt: dm-req-crypt successfully initalized.
984<6>[ 0.903608 / 01-01 00:00:00.899][1]
985<6>[ 0.904542 / 01-01 00:00:00.899][1] sdhci: Secure Digital Host Controller Interface driver
986<6>[ 0.904552 / 01-01 00:00:00.899][1] sdhci: Copyright(c) Pierre Ossman
987<6>[ 0.904566 / 01-01 00:00:00.899][1] sdhci-pltfm: SDHCI platform and OF driver helper
988<6>[ 0.905087 / 01-01 00:00:00.899][1] qcom_ice_get_pdevice: found ice device ecff4b40
989<6>[ 0.905097 / 01-01 00:00:00.899][1] qcom_ice_get_pdevice: matching platform device ed17ba00
990<6>[ 0.908602 / 01-01 00:00:00.899][1] qcom_ice 7803000.sdcc1ice: QC ICE 2.1.44 device found @0xf07a0000
991<6>[ 0.908950 / 01-01 00:00:00.899][1] sdhci_msm 7824900.sdhci: No vmmc regulator found
992<6>[ 0.908962 / 01-01 00:00:00.899][1] sdhci_msm 7824900.sdhci: No vqmmc regulator found
993<6>[ 0.909214 / 01-01 00:00:00.899][1] mmc0: SDHCI controller on 7824900.sdhci [7824900.sdhci] using 32-bit ADMA in CMDQ mode
994<0>[ 0.950131 / 01-01 00:00:00.949][4] drv probe : 904 sdhci_msm 45
995<4>[ 0.950611 / 01-01 00:00:00.949][4] sdhci_msm 7864900.sdhci: sdhci_msm_probe: ICE device is not enabled
996<6>[ 0.965520 / 01-01 00:00:00.959][6] sdhci_msm 7864900.sdhci: No vmmc regulator found
997<6>[ 0.965538 / 01-01 00:00:00.959][6] sdhci_msm 7864900.sdhci: No vqmmc regulator found
998<6>[ 0.965814 / 01-01 00:00:00.959][6] mmc1: SDHCI controller on 7864900.sdhci [7864900.sdhci] using 32-bit ADMA in legacy mode
999<6>[ 1.005240 / 01-01 00:00:00.999][5] mmc0: Out-of-interrupt timeout is 100[ms]
1000<6>[ 1.005254 / 01-01 00:00:00.999][5] mmc0: BKOPS_EN equals 0x0
1001<6>[ 1.005266 / 01-01 00:00:00.999][5] mmc0: eMMC FW version: 0x08
1002<6>[ 1.005278 / 01-01 00:00:00.999][5] mmc0: cache barrier support 0 flush policy 0
1003<0>[ 1.010232 / 01-01 00:00:01.009][6] drv probe : 950 sdhci_msm 59
1004<6>[ 1.010820 / 01-01 00:00:01.009][6] lge_get_boot_mode : 0
1005<6>[ 1.010840 / 01-01 00:00:01.009][6] lge_get_boot_mode : 0
1006<6>[ 1.013370 / 01-01 00:00:01.009][6] tz_log 8600720.tz-log: Hyp log service is not supported
1007<6>[ 1.014442 / 01-01 00:00:01.009][6] hidraw: raw HID events driver (C) Jiri Kosina
1008<6>[ 1.014880 / 01-01 00:00:01.009][6] usbcore: registered new interface driver usbhid
1009<6>[ 1.014892 / 01-01 00:00:01.009][6] usbhid: USB HID core driver
1010<6>[ 1.015289 / 01-01 00:00:01.009][6] ashmem: initialized
1011<6>[ 1.015759 / 01-01 00:00:01.009][6] qpnp_coincell_charger_show_state: enabled=Y, voltage=3200 mV, resistance=2100 ohm
1012<6>[ 1.018870 / 01-01 00:00:01.009][6] bimc-bwmon 408000.qcom,cpu-bwmon: BW HWmon governor registered.
1013<3>[ 1.020637 / 01-01 00:00:01.019][0] devfreq soc:qcom,cpubw: Couldn't update frequency transition information.
1014<3>[ 1.020781 / 01-01 00:00:01.019][0] devfreq soc:qcom,mincpubw: Couldn't update frequency transition information.
1015<6>[ 1.022581 / 01-01 00:00:01.019][0] Trustonic TEE: mobicore_init: MobiCore mcDrvModuleApi version is 3.1
1016<6>[ 1.022735 / 01-01 00:00:01.019][0] Trustonic TEE: mobicore_probe: MobiCore t-base-QC-MSM8996-Android-310D-V002-20160729_145511_15496
1017<6>[ 1.024028 / 01-01 00:00:01.019][0] usbcore: registered new interface driver snd-usb-audio
1018<6>[ 1.024041 / 01-01 00:00:01.019][4] mmc0: sdhci_msm_execute_tuning: finally setting the tuning phase to 12
1019<6>[ 1.029405 / 01-01 00:00:01.019][4] mmc_get_wp_area: can not find the key value from boot cmd - androidboot.wp_addr_1
1020<6>[ 1.029422 / 01-01 00:00:01.019][4] mmc_set_power_on_wp_user: no need to set up POWP
1021<6>[ 1.029440 / 01-01 00:00:01.019][4] mmc0: new HS400 MMC card at address 0001
1022<6>[ 1.029452 / 01-01 00:00:01.019][4] [LGE][MMC][mmc_add_card ( )] mmc_hostname:mmc0, type:MMC
1023<6>[ 1.029770 / 01-01 00:00:01.019][4] sdhci_msm_pm_qos_cpu_init (): voted for group #0 (mask=0xf) latency=2 (0xc43bdec0)
1024<6>[ 1.029788 / 01-01 00:00:01.019][4] sdhci_msm_pm_qos_cpu_init (): voted for group #1 (mask=0xf0) latency=2 (0xc43bdec8)
1025<6>[ 1.029915 / 01-01 00:00:01.019][5] mmcblk0: mmc0:0001 HAG2e 14.6 GiB
1026<6>[ 1.030076 / 01-01 00:00:01.029][4] mmcblk0rpmb: mmc0:0001 HAG2e partition 3 4.00 MiB
1027<6>[ 1.032628 / 01-01 00:00:01.029][4] mmcblk0: p1 p2 p3 p4 p5 p6 p7 p8 p9 p10 p11 p12 p13 p14 p15 p16 p17 p18 p19 p20 p21 p22 p23 p24 p25 p26 p27 p28 p29 p30 p31 p32 p33 p34 p35 p36 p37 p38 p39 p40 p41 p42 p43 p44 p45 p46 p47 p48 p49 p50 p51 p52 p53 p54 p55 p56 p57 p58 p59 p60 p61 p62 p63 p64 p65 p66
1028<6>[ 1.037882 / 01-01 00:00:01.029][0] msm-pcm-lpa soc:qcom,msm-pcm-lpa: msm_pcm_probe: dev name soc:qcom,msm-pcm-lpa
1029<6>[ 1.039834 / 01-01 00:00:01.029][4] [LGE][MMC][mmc_add_card ( )] device_add & uevent posting complete!
1030<6>[ 1.043120 / 01-01 00:00:01.039][0] u32 classifier
1031<6>[ 1.043131 / 01-01 00:00:01.039][0] Actions configured
1032<6>[ 1.043178 / 01-01 00:00:01.039][0] Netfilter messages via NETLINK v0.30.
1033<6>[ 1.043231 / 01-01 00:00:01.039][0] nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
1034<6>[ 1.043605 / 01-01 00:00:01.039][0] ctnetlink v0.93: registering with nfnetlink.
1035<6>[ 1.044131 / 01-01 00:00:01.039][0] xt_time: kernel timezone is -0000
1036<6>[ 1.044159 / 01-01 00:00:01.039][0] 939-23012-001-quicksec-vpnclient-for-android-3.4-3478-b05f514d009c-3478
1037<6>[ 1.044168 / 01-01 00:00:01.039][0] vpnclient kernel spd loaded.
1038<6>[ 1.044451 / 01-01 00:00:01.039][0] ip_tables: (C) 2000-2006 Netfilter Core Team
1039<6>[ 1.044617 / 01-01 00:00:01.039][0] arp_tables: (C) 2002 David S. Miller
1040<6>[ 1.044668 / 01-01 00:00:01.039][0] TCP: bic registered
1041<6>[ 1.044681 / 01-01 00:00:01.039][0] TCP: cubic registered
1042<6>[ 1.044694 / 01-01 00:00:01.039][0] Initializing XFRM netlink socket
1043<6>[ 1.044966 / 01-01 00:00:01.039][0] NET: Registered protocol family 10
1044<7>[ 1.045565 / 01-01 00:00:01.039][0] now = 4294937400, schedule = 4294949500, rounded schedule = 4294949600 => 4294949500
1045<6>[ 1.045753 / 01-01 00:00:01.039][0] mip6: Mobile IPv6
1046<6>[ 1.045781 / 01-01 00:00:01.039][0] ip6_tables: (C) 2000-2006 Netfilter Core Team
1047<6>[ 1.045910 / 01-01 00:00:01.039][0] sit: IPv6 over IPv4 tunneling driver
1048<6>[ 1.046299 / 01-01 00:00:01.039][0] NET: Registered protocol family 17
1049<6>[ 1.046325 / 01-01 00:00:01.039][0] NET: Registered protocol family 15
1050<6>[ 1.046367 / 01-01 00:00:01.039][0] bridge: automatic filtering via arp/ip/ip6tables has been deprecated. Update your scripts to load br_netfilter if you need this.
1051<6>[ 1.046382 / 01-01 00:00:01.039][0] Ebtables v2.0 registered
1052<6>[ 1.046497 / 01-01 00:00:01.039][0] Bluetooth: ee053eb0
1053<6>[ 1.046510 / 01-01 00:00:01.039][0] Bluetooth: ee053eb0Bluetooth: ee053ec0
1054<6>[ 1.046546 / 01-01 00:00:01.039][0] Bluetooth: ee053e98Bluetooth: ee053e98
1055<6>[ 1.046564 / 01-01 00:00:01.039][0] Bluetooth: ee053e90Bluetooth: ee053ed0
1056<6>[ 1.046585 / 01-01 00:00:01.039][0] Bluetooth: ee053ed0<6>[ 1.046638 / 01-01 00:00:01.039][0] l2tp_core: L2TP core driver, V2.0
1057<6>[ 1.046659 / 01-01 00:00:01.039][0] l2tp_ppp: PPPoL2TP kernel driver, V2.0
1058<6>[ 1.046672 / 01-01 00:00:01.039][0] l2tp_ip: L2TP IP encapsulation support (L2TPv3)
1059<6>[ 1.046694 / 01-01 00:00:01.039][0] l2tp_netlink: L2TP netlink interface
1060<6>[ 1.046724 / 01-01 00:00:01.039][0] l2tp_eth: L2TP ethernet pseudowire support (L2TPv3)
1061<6>[ 1.046747 / 01-01 00:00:01.039][0] l2tp_debugfs: L2TP debugfs support
1062<6>[ 1.046761 / 01-01 00:00:01.039][0] l2tp_ip6: L2TP IP encapsulation support for IPv6 (L2TPv3)
1063<6>[ 1.047353 / 01-01 00:00:01.039][0] NET: Registered protocol family 27
1064<6>[ 1.051150 / 01-01 00:00:01.049][5] subsys-pil-tz c200000.qcom,lpass: for adsp segments only will be dumped.
1065<6>[ 1.052810 / 01-01 00:00:01.049][4] subsys-pil-tz a21b000.qcom,pronto: for wcnss segments only will be dumped.
1066<6>[ 1.055107 / 01-01 00:00:01.049][5] pil-q6v5-mss 4080000.qcom,mss: for modem segments only will be dumped.
1067<6>[ 1.056838 / 01-01 00:00:01.049][6] msm_otg 78db000.usb: phy_reset: success
1068<5>[ 1.058319 / 01-01 00:00:01.049][0] Registering SWP/SWPB emulation handler
1069<6>[ 1.058372 / 01-01 00:00:01.049][0] Creating CPU group 0
1070<6>[ 1.058381 / 01-01 00:00:01.049][0] Init CPU0 state
1071<6>[ 1.058390 / 01-01 00:00:01.049][0] Init CPU1 state
1072<6>[ 1.058398 / 01-01 00:00:01.049][0] Init CPU2 state
1073<6>[ 1.058407 / 01-01 00:00:01.049][0] Init CPU3 state
1074<6>[ 1.058565 / 01-01 00:00:01.049][0] Creating CPU group 4
1075<6>[ 1.058575 / 01-01 00:00:01.049][0] Init CPU4 state
1076<6>[ 1.058583 / 01-01 00:00:01.049][0] Init CPU5 state
1077<6>[ 1.058591 / 01-01 00:00:01.049][0] Init CPU6 state
1078<6>[ 1.058599 / 01-01 00:00:01.049][0] Init CPU7 state
1079<5>[ 1.058985 / 01-01 00:00:01.049][0] Loading compiled-in X.509 certificates
1080<5>[ 1.063146 / 01-01 00:00:01.059][0] Loaded X.509 cert 'Magrathea: Glacier signing key: 205c7f4b8966de023c81e9a62d59bb0955c734f6'
1081<5>[ 1.064364 / 01-01 00:00:01.059][0] Key type encrypted registered
1082<3>[ 1.161270 / 01-01 00:00:01.159][6] IPA HW is not supported on this target
1083<6>[ 1.162983 / 01-01 00:00:01.159][6] msm_otg 78db000.usb: USB in low power mode
1084<6>[ 1.170079 / 01-01 00:00:01.169][1] Cable type is already defined
1085<6>[ 1.181372 / 01-01 00:00:01.179][0] power_sysfs_parse_dt : Total sysfs node is 53
1086<6>[ 1.182998 / 01-01 00:00:01.179][0] power_sysfs_probe : Success Power sysfs Init
1087<6>[ 1.183430 / 01-01 00:00:01.179][0] monitor-thermal soc:lge,monitor-thermal: LGE monitor thermal Initialized
1088<6>[ 1.183934 / 01-01 00:00:01.179][0] fastrpc soc:qcom,adsprpc-mem: for adsp_rh segments only will be dumped.
1089<6>[ 1.185875 / 01-01 00:00:01.179][0] RNDIS_IPA module is loaded.
1090<6>[ 1.186180 / 01-01 00:00:01.179][0] usb_gadget_probe_driver
1091<6>[ 1.186192 / 01-01 00:00:01.179][0] gadget name udc->gadget->name ci13xxx_msm
1092<6>[ 1.186200 / 01-01 00:00:01.179][0]
1093<6>[ 1.186200 / 01-01 00:00:01.179][0] ********************************************
1094<6>[ 1.186207 / 01-01 00:00:01.179][0]
1095<6>[ 1.186207 / 01-01 00:00:01.179][0] No of UDCs: 1
1096<6>[ 1.186221 / 01-01 00:00:01.179][0] driver->function: android_usb
1097<6>[ 1.186225 / 01-01 00:00:01.179][0]
1098<6>[ 1.186225 / 01-01 00:00:01.179][0] ********************************************
1099<6>[ 1.186240 / 01-01 00:00:01.179][0] udc->gadget->usb_core_id : 0
1100<6>[ 1.186243 / 01-01 00:00:01.179][0]
1101<6>[ 1.186243 / 01-01 00:00:01.179][0] driver->usb_core_id: 0
1102<6>[ 1.186454 / 01-01 00:00:01.179][0] file system registered
1103<6>[ 1.186517 / 01-01 00:00:01.179][0] mbim_init: initialize 1 instances
1104<6>[ 1.186577 / 01-01 00:00:01.179][0] mbim_init: Initialized 1 ports
1105<6>[ 1.187770 / 01-01 00:00:01.179][0] rndis_qc_init: initialize rndis QC instance
1106<6>[ 1.188007 / 01-01 00:00:01.179][0] Number of LUNs=8
1107<6>[ 1.188020 / 01-01 00:00:01.179][0] Mass Storage Function, version: 2009/09/11
1108<6>[ 1.188031 / 01-01 00:00:01.179][0] LUN: removable file: (no medium)
1109<6>[ 1.188047 / 01-01 00:00:01.179][0] Number of LUNs=1
1110<6>[ 1.188092 / 01-01 00:00:01.179][0] LUN: removable file: (no medium)
1111<6>[ 1.188101 / 01-01 00:00:01.179][0] Number of LUNs=1
1112<6>[ 1.188367 / 01-01 00:00:01.179][0] android_usb gadget: android_usb ready
1113<6>[ 1.188380 / 01-01 00:00:01.179][0] msm_hsusb msm_hsusb: [ci13xxx_start] hw_ep_max = 32
1114<6>[ 1.192089 / 01-01 00:00:01.189][0] msm_otg 78db000.usb: phy_reset: success
1115<6>[ 1.300413 / 01-01 00:00:01.299][0] msm_otg 78db000.usb: USB exited from low power mode
1116<6>[ 1.300433 / 01-01 00:00:01.299][0] msm_hsusb msm_hsusb: CI13XXX_CONTROLLER_UDC_STARTED_EVENT received
1117<6>[ 1.300600 / 01-01 00:00:01.299][0] udc->gadget->name: ci13xxx_msm
1118<0>[ 1.300654 / 01-01 00:00:01.299][0] drv probe : 1185 android_usb 114
1119<6>[ 1.302089 / 01-01 00:00:01.299][0] msm_otg 78db000.usb: USB in low power mode
1120<6>[ 1.302451 / 01-01 00:00:01.299][0] hall_ic switch registration succeeded
1121<6>[ 1.302575 / 01-01 00:00:01.299][0] stylus_pen switch registration succeeded<6>[ 1.302835 / 01-01 00:00:01.299][0] input: gpio-keys as /devices/soc/soc:gpio_keys/input/input1
1122<7>[ 1.303221 / 01-01 00:00:01.299][0] 7: [DEBUG] ../../../../../../kernel/lge/msm8937/drivers/input/fingerprint/ix_btp_tee.c:426 ix_init
1123<3>[ 1.303225 / 01-01 00:00:01.299][6] [TOUCH][F][COMMON] async_touch_init()
1124<3>[ 1.303235 / 01-01 00:00:01.299][6] [TOUCH][L][MISC] Touch Module Get. Module index = 0
1125<3>[ 1.303244 / 01-01 00:00:01.299][6] [TOUCH][F][MISC] TouchInitializeGpio()
1126<7>[ 1.303633 / 01-01 00:00:01.299][0] 7: [DEBUG] ../../../../../../kernel/lge/msm8937/drivers/input/fingerprint/ix_btp_tee.c:454 ix_probe
1127<4>[ 1.303642 / 01-01 00:00:01.299][0] CONFIG_COMPAT enable
1128<7>[ 1.303658 / 01-01 00:00:01.299][0] 7: [DEBUG] ../../../../../../kernel/lge/msm8937/drivers/input/fingerprint/ix_btp_tee.c:975 ix_get_of_pdata
1129<6>[ 1.303687 / 01-01 00:00:01.299][0] 6: [INFO] irq : 62 reset : 47
1130<3>[ 1.303778 / 01-01 00:00:01.299][6] [TOUCH][F][COMMON] touch_probe()
1131<7>[ 1.303794 / 01-01 00:00:01.299][0] power on!!
1132<7>[ 1.303795 / 01-01 00:00:01.299][0] 7: [DEBUG] ../../../../../../kernel/lge/msm8937/drivers/input/fingerprint/ix_btp_tee.c:360 ix_regulator_set ix_regulator_set(): power on
1133<3>[ 1.303815 / 01-01 00:00:01.299][6] [TOUCH][L][COMMON] STATE = BOOT
1134<3>[ 1.303827 / 01-01 00:00:01.299][6] [TOUCH][L][CONFIG] ======== Model Configuration ( Begin ) ========
1135<3>[ 1.303837 / 01-01 00:00:01.299][6] [TOUCH][L][CONFIG] button_support=0
1136<3>[ 1.303848 / 01-01 00:00:01.299][6] [TOUCH][L][CONFIG] number_of_button=0
1137<3>[ 1.303859 / 01-01 00:00:01.299][6] [TOUCH][L][CONFIG] button_name[0]=0
1138<3>[ 1.303869 / 01-01 00:00:01.299][6] [TOUCH][L][CONFIG] button_name[1]=0
1139<3>[ 1.303880 / 01-01 00:00:01.299][6] [TOUCH][L][CONFIG] button_name[2]=0
1140<3>[ 1.303891 / 01-01 00:00:01.299][6] [TOUCH][L][CONFIG] button_name[3]=0
1141<3>[ 1.303902 / 01-01 00:00:01.299][6] [TOUCH][L][CONFIG] max_x=720
1142<3>[ 1.303912 / 01-01 00:00:01.299][6] [TOUCH][L][CONFIG] max_y=1280
1143<3>[ 1.303923 / 01-01 00:00:01.299][6] [TOUCH][L][CONFIG] max_pressure=255
1144<3>[ 1.303934 / 01-01 00:00:01.299][6] [TOUCH][L][CONFIG] max_width=15
1145<3>[ 1.303945 / 01-01 00:00:01.299][6] [TOUCH][L][CONFIG] max_orientation=1
1146<3>[ 1.303955 / 01-01 00:00:01.299][6] [TOUCH][L][CONFIG] max_id=10
1147<3>[ 1.303966 / 01-01 00:00:01.299][6] [TOUCH][L][CONFIG] protocol_type=MT_PROTOCOL_B
1148<3>[ 1.303977 / 01-01 00:00:01.299][6] [TOUCH][L][CONFIG] ======== Model Configuration ( End ) ========
1149<3>[ 1.303988 / 01-01 00:00:01.299][6] [TOUCH][F][COMMON] register_input_dev()
1150<6>[ 1.304148 / 01-01 00:00:01.299][6] input: touch_dev as /devices/virtual/input/input2
1151<6>[ 1.304159 / 01-01 00:00:01.299][0] btp spi6.0: [INFO] regulator value : 1800000
1152<3>[ 1.304246 / 01-01 00:00:01.299][6] [TOUCH][F][COMMON] sysfs_register()
1153<3>[ 1.304471 / 01-01 00:00:01.299][6] [TOUCH][F][MIT300] MIT300_Initialize()
1154<3>[ 1.304484 / 01-01 00:00:01.299][6] [TOUCH][L][MIT300] factory boot check : 0
1155<3>[ 1.304496 / 01-01 00:00:01.299][6] [TOUCH][F][MIT300] MIT300_ReadIcFirmwareInfo()
1156<3>[ 1.304507 / 01-01 00:00:01.299][6] [TOUCH][L][MIT300] ==============Read Firmware Info===========
1157<3>[ 1.304701 / 01-01 00:00:01.299][6] i2c-msm-v2 78b7000.i2c: msm_bus_scale_register_client(mstr-id:86):0x1a (ok)
1158<3>[ 1.305318 / 01-01 00:00:01.299][6] [TOUCH][L][MIT300] F/W Product : PH1_C7
1159<3>[ 1.305589 / 01-01 00:00:01.299][6] [TOUCH][L][MIT300] IC Name : T3H0
1160<3>[ 1.305811 / 01-01 00:00:01.299][6] [TOUCH][L][MIT300] IC F/W Version = v2.09 ( Official Release )
1161<3>[ 1.306152 / 01-01 00:00:01.299][6] [TOUCH][L][MIT300] max_x[720] max_y[1280]
1162<3>[ 1.306165 / 01-01 00:00:01.299][6] [TOUCH][L][MIT300] col_num[18] row_num[32] key_num[0]
1163<7>[ 1.306179 / 01-01 00:00:01.299][0] 7: [DEBUG] ../../../../../../kernel/lge/msm8937/drivers/input/fingerprint/ix_btp_tee.c:842 ix_get_hw_id
1164<3>[ 1.306507 / 01-01 00:00:01.299][6] [TOUCH][L][MIT300] event_format[1] event_size[8]
1165<3>[ 1.306519 / 01-01 00:00:01.299][6] [TOUCH][L][MIT300] ===========================================
1166<3>[ 1.306531 / 01-01 00:00:01.299][6] [TOUCH][F][MIT300] MIT300_GetBinFirmwareInfo()
1167<3>[ 1.306543 / 01-01 00:00:01.299][6] [TOUCH][L][MIT300] Firmware filename = melfas/mit300/ph2/melfas_mip4_cut7.bin
1168<3>[ 1.306559 / 01-01 00:00:01.299][6] [TOUCH][L][MIT300] BIN F/W Version = v2.09 ( Official Release )
1169<3>[ 1.306571 / 01-01 00:00:01.299][6] [TOUCH][F][MISC] TouchRegisterIrq()
1170<6>[ 1.306650 / 01-01 00:00:01.299][0] btp spi6.0: [INFO] ***************************************************
1171<6>[ 1.306664 / 01-01 00:00:01.299][0] btp spi6.0: [INFO] * Chip ID[0x52] * Revision Number[0x10] * Count[1]
1172<6>[ 1.306674 / 01-01 00:00:01.299][0] btp spi6.0: [INFO] ***************************************************
1173<3>[ 1.306751 / 01-01 00:00:01.299][6] [TOUCH][L][MISC] Interrupt Disabled
1174<3>[ 1.306764 / 01-01 00:00:01.299][6] [TOUCH][L][COMMON] STATE = NORMAL
1175<3>[ 1.306779 / 01-01 00:00:01.299][6] [TOUCH][L][MISC] Interrupt Enabled
1176<3>[ 1.306828 / 01-01 00:00:01.299][6] [TOUCH][L][COMMON] Finish async_touch_init
1177<3>[ 1.307268 / 01-01 00:00:01.299][7] [TOUCH][L][COMMON] [FINGER] PRESS <0> x = 35, y = 1224, z = 16, w_m = 3, w_n = 2, o = 0
1178<6>[ 1.307314 / 01-01 00:00:01.299][0] btp spi6.0: [INFO] interrupt wait count [1]
1179<7>[ 1.307325 / 01-01 00:00:01.299][0] 7: [DEBUG] ../../../../../../kernel/lge/msm8937/drivers/input/fingerprint/ix_btp_tee.c:791 ix_reset
1180<7>[ 1.307431 / 01-01 00:00:01.299][0] 7: [DEBUG] ../../../../../../kernel/lge/msm8937/drivers/input/fingerprint/ix_btp_tee.c:817 ix_init_param
1181<3>[ 1.307883 / 01-01 00:00:01.299][5] [TOUCH][L][MISC] Interrupt Disabled
1182<3>[ 1.307901 / 01-01 00:00:01.299][5] [TOUCH][L][COMMON] [FINGER] RELEASE<0> x = 0, y = 0, z = 0, w_m = 0, w_n = 0, o = 0
1183<3>[ 1.307915 / 01-01 00:00:01.299][5] [TOUCH][L][COMMON] [FINGER] RELEASE<1> x = 0, y = 0, z = 0, w_m = 0, w_n = 0, o = 0
1184<3>[ 1.307929 / 01-01 00:00:01.299][5] [TOUCH][L][COMMON] [FINGER] RELEASE<2> x = 0, y = 0, z = 0, w_m = 0, w_n = 0, o = 0
1185<3>[ 1.307943 / 01-01 00:00:01.299][5] [TOUCH][L][COMMON] [FINGER] RELEASE<3> x = 0, y = 0, z = 0, w_m = 0, w_n = 0, o = 0
1186<3>[ 1.307957 / 01-01 00:00:01.299][5] [TOUCH][L][COMMON] [FINGER] RELEASE<4> x = 0, y = 0, z = 0, w_m = 0, w_n = 0, o = 0
1187<3>[ 1.307971 / 01-01 00:00:01.299][5] [TOUCH][L][COMMON] [FINGER] RELEASE<5> x = 0, y = 0, z = 0, w_m = 0, w_n = 0, o = 0
1188<3>[ 1.307984 / 01-01 00:00:01.299][5] [TOUCH][L][COMMON] [FINGER] RELEASE<6> x = 0, y = 0, z = 0, w_m = 0, w_n = 0, o = 0
1189<3>[ 1.307998 / 01-01 00:00:01.299][5] [TOUCH][L][COMMON] [FINGER] RELEASE<7> x = 0, y = 0, z = 0, w_m = 0, w_n = 0, o = 0
1190<3>[ 1.308012 / 01-01 00:00:01.299][5] [TOUCH][L][COMMON] [FINGER] RELEASE<8> x = 0, y = 0, z = 0, w_m = 0, w_n = 0, o = 0
1191<3>[ 1.308026 / 01-01 00:00:01.299][5] [TOUCH][L][COMMON] [FINGER] RELEASE<9> x = 0, y = 0, z = 0, w_m = 0, w_n = 0, o = 0
1192<3>[ 1.308039 / 01-01 00:00:01.299][5] [TOUCH][L][COMMON] all finger released
1193<3>[ 1.308050 / 01-01 00:00:01.299][5] [TOUCH][L][COMMON] STATE = NORMAL
1194<3>[ 1.308065 / 01-01 00:00:01.299][5] [TOUCH][L][MISC] Interrupt Enabled
1195<6>[ 1.316342 / 01-01 00:00:01.309][0] btp spi6.0: [INFO] Interrupt test OK
1196<7>[ 1.316353 / 01-01 00:00:01.309][0] 7: [DEBUG] ../../../../../../kernel/lge/msm8937/drivers/input/fingerprint/ix_btp_tee.c:791 ix_reset
1197<7>[ 1.316454 / 01-01 00:00:01.309][0] 7: [DEBUG] ../../../../../../kernel/lge/msm8937/drivers/input/fingerprint/ix_btp_tee.c:817 ix_init_param
1198<6>[ 1.324101 / 01-01 00:00:01.319][0] input: fingerprint as /devices/virtual/input/lge_fingerprint
1199<7>[ 1.324204 / 01-01 00:00:01.319][0] 7: [DEBUG] ../../../../../../kernel/lge/msm8937/drivers/input/fingerprint/ix_btp_tee.c:432 ix_init ok
1200<6>[ 1.324265 / 01-03 07:55:02.500][0] qcom,qpnp-rtc qpnp-rtc-7: setting system clock to 2016-01-03 07:55:02 UTC (1451807702)
1201<6>[ 1.327484 / 01-03 07:55:02.500][0] [BOOT_CAUSE] 160, warm_reset = 0
1202<6>[ 1.327495 / 01-03 07:55:02.500][0] [SMPL_CNT] ===> not smpl boot!!!!!
1203<6>[ 1.329661 / 01-03 07:55:02.500][0] vts_probe: vts_probe start
1204<6>[ 1.329949 / 01-03 07:55:02.500][0] vts_probe: xo_therm is registered. chan=50, weight=475
1205<6>[ 1.329962 / 01-03 07:55:02.500][0] vts_probe: quiet_therm is registered. chan=19, weight=382
1206<6>[ 1.329973 / 01-03 07:55:02.500][0] vts_probe: Add 2 sensors for virtual temp sensor
1207<6>[ 1.329982 / 01-03 07:55:02.500][0] vts_probe: probe done
1208<3>[ 1.330352 / 01-03 07:55:02.500][0] gpio_keys_gpio_report_event: code(222) state(0)
1209<3>[ 1.330366 / 01-03 07:55:02.500][0] gpio_keys_gpio_report_event: code(222) state(1)
1210<6>[ 1.330375 / 01-03 07:55:02.500][0] stylus_pen state = 1
1211<6>[ 1.330397 / 01-03 07:55:02.500][0] stylus_pen state changed to 1
1212<3>[ 1.330418 / 01-03 07:55:02.500][0] gpio_keys_gpio_report_event: code(115) state(0)
1213<3>[ 1.330924 / 01-03 07:55:02.500][0] parse_cpu_levels: idx 1 900
1214<3>[ 1.331169 / 01-03 07:55:02.500][0] calculate_residency: residency < 0 for LPM
1215<3>[ 1.331180 / 01-03 07:55:02.500][0] parse_cpu_levels: idx 1 400
1216<3>[ 1.334959 / 01-03 07:55:02.500][0] qcom,qpnp-flash-led qpnp-flash-led-24: Unable to acquire pinctrl
1217<3>[ 1.336117 / 01-03 07:55:02.500][7] [TOUCH][L][COMMON] [FINGER] RELEASE<0> x = 0, y = 0, z = 0, w_m = 0, w_n = 0, o = 0
1218<6>[ 1.339091 / 01-03 07:55:02.500][0] qcom,cc-debug-8952 1874000.qcom,cc-debug: Registered Debug Mux successfully
1219<6>[ 1.344533 / 01-03 07:55:02.509][0] msm8952-asoc-wcd c051000.sound: default codec configured
1220<3>[ 1.348770 / 01-03 07:55:02.509][0] msm8952-asoc-wcd c051000.sound: ASoC: platform (null) not registered
1221<3>[ 1.348819 / 01-03 07:55:02.509][0] msm8952-asoc-wcd c051000.sound: snd_soc_register_card failed (-517)
1222<6>[ 1.349481 / 01-03 07:55:02.509][0] adv_vreg: disabling
1223<6>[ 1.349518 / 01-03 07:55:02.509][0] mem_acc_corner: disabling
1224<6>[ 1.349538 / 01-03 07:55:02.509][0] clock_late_init: Removing enables held for handed-off clocks
1225<6>[ 1.352498 / 01-03 07:55:02.519][0] ALSA device list:
1226<6>[ 1.352508 / 01-03 07:55:02.519][0] No soundcards found.
1227<3>[ 1.352593 / 01-03 07:55:02.519][0] Warning: unable to open an initial console.
1228<6>[ 1.353078 / 01-03 07:55:02.519][0] Freeing unused kernel memory: 472K (c1500000 - c1576000)
1229<13>[ 1.354201 / 01-03 07:55:02.519][0] init: init started!
1230<7>[ 1.357561 / 01-03 07:55:02.519][0] SELinux: 2048 avtab hash slots, 4752 rules.
1231<6>[ 1.357623 / 01-03 07:55:02.519][0] SELinux: Android master kernel running Android M policy in compatibility mode.
1232<7>[ 1.359274 / 01-03 07:55:02.519][0] SELinux: 2048 avtab hash slots, 4752 rules.
1233<7>[ 1.359291 / 01-03 07:55:02.519][0] SELinux: 1 users, 2 roles, 518 types, 0 bools, 1 sens, 1024 cats
1234<7>[ 1.359301 / 01-03 07:55:02.519][0] SELinux: 87 classes, 4752 rules
1235<6>[ 1.360269 / 01-03 07:55:02.529][0] SELinux: Permission module_load in class system not defined in policy.
1236<6>[ 1.360562 / 01-03 07:55:02.529][0] SELinux: Permission audit_read in class capability2 not defined in policy.
1237<6>[ 1.360584 / 01-03 07:55:02.529][0] SELinux: Class can_socket not defined in policy.
1238<6>[ 1.360595 / 01-03 07:55:02.529][0] SELinux: the above unknown classes and permissions will be denied
1239<7>[ 1.360617 / 01-03 07:55:02.529][0] SELinux: Completing initialization.
1240<7>[ 1.360626 / 01-03 07:55:02.529][0] SELinux: Setting up existing superblocks.
1241<7>[ 1.360643 / 01-03 07:55:02.529][0] SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
1242<7>[ 1.360667 / 01-03 07:55:02.529][0] SELinux: initialized (dev rootfs, type rootfs), uses genfs_contexts
1243<7>[ 1.361076 / 01-03 07:55:02.529][0] SELinux: initialized (dev bdev, type bdev), not configured for labeling
1244<7>[ 1.361094 / 01-03 07:55:02.529][0] SELinux: initialized (dev proc, type proc), uses genfs_contexts
1245<7>[ 1.361120 / 01-03 07:55:02.529][0] SELinux: initialized (dev debugfs, type debugfs), uses genfs_contexts
1246<7>[ 1.386762 / 01-03 07:55:02.549][0] SELinux: initialized (dev sockfs, type sockfs), uses task SIDs
1247<7>[ 1.386784 / 01-03 07:55:02.549][0] SELinux: initialized (dev pipefs, type pipefs), uses task SIDs
1248<7>[ 1.386799 / 01-03 07:55:02.549][0] SELinux: initialized (dev anon_inodefs, type anon_inodefs), not configured for labeling
1249<7>[ 1.386812 / 01-03 07:55:02.549][0] SELinux: initialized (dev aio, type aio), not configured for labeling
1250<7>[ 1.386827 / 01-03 07:55:02.549][0] SELinux: initialized (dev devpts, type devpts), uses transition SIDs
1251<7>[ 1.386854 / 01-03 07:55:02.549][0] SELinux: initialized (dev selinuxfs, type selinuxfs), uses genfs_contexts
1252<7>[ 1.386915 / 01-03 07:55:02.549][0] SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
1253<7>[ 1.386941 / 01-03 07:55:02.549][0] SELinux: initialized (dev sysfs, type sysfs), uses genfs_contexts
1254<5>[ 1.393648 / 01-03 07:55:02.559][0] audit: type=1403 audit(1451807702.559:2): policy loaded auid=4294967295 ses=4294967295
1255<13>[ 1.394073 / 01-03 07:55:02.559][0] init: (Initializing SELinux non-enforcing took 0.04s.)
1256<13>[ 1.399340 / 01-03 07:55:02.559][0] init: init second stage started!
1257<11>[ 1.451073 / 01-03 07:55:02.619][0] init: waitpid failed: No child processes
1258<13>[ 1.451820 / 01-03 07:55:02.619][0] init: (Loading properties from /default.prop took 0.00s.)
1259<11>[ 1.452234 / 01-03 07:55:02.619][0] init: /init.rc: 12: invalid command 'setcon'
1260<11>[ 1.452302 / 01-03 07:55:02.619][0] init: /init.rc: 62: invalid command 'load_all_props'
1261<11>[ 1.452396 / 01-03 07:55:02.619][0] init: could not import file '/init.recovery.logd.rc' from '/init.rc'
1262<13>[ 1.452588 / 01-03 07:55:02.619][0] init: (Parsing /init.recovery.usb.rc took 0.00s.)
1263<13>[ 1.452640 / 01-03 07:55:02.619][0] init: (Parsing /init.recovery.service.rc took 0.00s.)
1264<11>[ 1.452672 / 01-03 07:55:02.619][0] init: could not import file '/init.recovery.ph2n.rc' from '/init.rc'
1265<13>[ 1.452692 / 01-03 07:55:02.619][0] init: (Parsing /init.rc took 0.00s.)
1266<5>[ 1.452797 / 01-03 07:55:02.619][0] audit: type=1400 audit(1451807702.619:3): avc: denied { setcheckreqprot } for pid=1 comm="init" scontext=u:r:init:s0 tcontext=u:object_r:kernel:s0 tclass=security permissive=1
1267<11>[ 1.452850 / 01-03 07:55:02.619][0] init: SELinux: Could not get canonical path /postinstall restorecon: No such file or directory.
1268<13>[ 1.452893 / 01-03 07:55:02.619][0] init: Starting service 'ueventd'...
1269<13>[ 1.453171 / 01-03 07:55:02.619][0] init: Starting service 'healthd'...
1270<13>[ 1.453479 / 01-03 07:55:02.619][0] init: Waiting for /dev/.coldboot_done...
1271<13>[ 1.455586 / 01-03 07:55:02.619][4] ueventd: ueventd started!
1272<5>[ 1.455683 / 01-03 07:55:02.619][5] audit: type=1400 audit(1451807702.619:4): avc: denied { write } for pid=366 comm="healthd" name="/" dev="tmpfs" ino=15432 scontext=u:r:healthd:s0 tcontext=u:object_r:device:s0 tclass=dir permissive=1
1273<5>[ 1.455720 / 01-03 07:55:02.619][5] audit: type=1400 audit(1451807702.619:5): avc: denied { mknod } for pid=366 comm="healthd" capability=27 scontext=u:r:healthd:s0 tcontext=u:r:healthd:s0 tclass=capability permissive=1
1274<5>[ 1.455752 / 01-03 07:55:02.619][5] audit: type=1400 audit(1451807702.619:6): avc: denied { add_name } for pid=366 comm="healthd" name="__kmsg__" scontext=u:r:healthd:s0 tcontext=u:object_r:device:s0 tclass=dir permissive=1
1275<5>[ 1.455800 / 01-03 07:55:02.619][5] audit: type=1400 audit(1451807702.619:7): avc: denied { create } for pid=366 comm="healthd" name="__kmsg__" scontext=u:r:healthd:s0 tcontext=u:object_r:device:s0 tclass=chr_file permissive=1
1276<5>[ 1.455865 / 01-03 07:55:02.619][5] audit: type=1400 audit(1451807702.619:8): avc: denied { write } for pid=366 comm="healthd" name="__kmsg__" dev="tmpfs" ino=5156 scontext=u:r:healthd:s0 tcontext=u:object_r:device:s0 tclass=chr_file permissive=1
1277<5>[ 1.455906 / 01-03 07:55:02.619][5] audit: type=1400 audit(1451807702.619:9): avc: denied { open } for pid=366 comm="healthd" path="/dev/__kmsg__" dev="tmpfs" ino=5156 scontext=u:r:healthd:s0 tcontext=u:object_r:device:s0 tclass=chr_file permissive=1
1278<5>[ 1.455949 / 01-03 07:55:02.619][5] audit: type=1400 audit(1451807702.619:10): avc: denied { remove_name } for pid=366 comm="healthd" name="__kmsg__" dev="tmpfs" ino=5156 scontext=u:r:healthd:s0 tcontext=u:object_r:device:s0 tclass=dir permissive=1
1279<11>[ 1.455986 / 01-03 07:55:02.759][0] charger: void healthd_board_init(healthd_config*): Unable to load battery scale image
1280<6>[ 1.590207 / 01-03 07:55:02.759][0] FG: fg_age_detection: battery age not init
1281<6>[ 1.590252 / 01-03 07:55:02.759][0] SMBCHG: smbchg_calc_max_flash_current: avail_iflash=-19498514, ocv=-22, ibat=442176, rbatt=99978
1282<6>[ 1.597426 / 01-03 07:55:02.759][0] FG: fg_age_detection: battery age not init
1283<3>[ 1.730108 / 01-03 07:55:02.899][5] msm_otg 78db000.usb: msm_init_adc_work
1284<3>[ 1.730139 / 01-03 07:55:02.899][5] msm_otg 78db000.usb: unable to get qpnp adc for otg
1285<13>[ 1.804832 / 01-03 07:55:02.969][0] ueventd: Coldboot took 0.34s.
1286<13>[ 1.806390 / 01-03 07:55:02.969][4] init: Waiting for /dev/.coldboot_done took 0.35s.
1287<7>[ 1.808311 / 01-03 07:55:02.969][4] SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
1288<7>[ 1.809660 / 01-03 07:55:02.969][4] SELinux: initialized (dev pstore, type pstore), uses genfs_contexts
1289<7>[ 1.810389 / 01-03 07:55:02.979][4] SELinux: initialized (dev functionfs, type functionfs), uses genfs_contexts
1290<6>[ 1.810492 / 01-03 07:55:02.979][4] android_usb android0: gadget enable(0)
1291<3>[ 1.810512 / 01-03 07:55:02.979][4] enable_store: android_usb: already disabled
1292<6>[ 1.810695 / 01-03 07:55:02.979][4] android_usb android0: LGE-USB request function list: adb
1293<13>[ 1.810897 / 01-03 07:55:02.979][4] init: (Loading properties from /system/build.prop took 0.00s.)
1294<13>[ 1.810936 / 01-03 07:55:02.979][4] init: (Loading properties from /vendor/build.prop took 0.00s.)
1295<13>[ 1.810972 / 01-03 07:55:02.979][4] init: (Loading properties from /factory/factory.prop took 0.00s.)
1296<11>[ 1.811025 / 01-03 07:55:02.979][4] fs_mgr: Cannot open file /fstab.ph2n
1297<11>[ 1.811049 / 01-03 07:55:02.979][4] init: unable to read fstab /fstab.ph2n: No such file or directory
1298<13>[ 1.811097 / 01-03 07:55:02.979][4] init: (Loading properties from /data/local.prop took 0.00s.)
1299<11>[ 1.811134 / 01-03 07:55:02.979][4] init: Unable to open persistent property directory "/data/property": No such file or directory
1300<13>[ 1.811688 / 01-03 07:55:02.979][4] init: Starting service 'set_permissive'...
1301<13>[ 1.811992 / 01-03 07:55:02.979][4] init: Starting service 'recovery'...
1302<6>[ 1.812325 / 01-03 07:55:02.979][4] android_usb android0: gadget enable(0)
1303<13>[ 1.812390 / 01-03 07:55:02.979][4] init: Starting service 'adbd'...
1304<6>[ 1.812664 / 01-03 07:55:02.979][4] android_usb android0: gadget enable(1)
1305<6>[ 1.812689 / 01-03 07:55:02.979][4] ffs_function_enable: ffs_function_enable: config->opened(0)
1306<6>[ 1.812707 / 01-03 07:55:02.979][4] android_disable: android_disable: checked disable_depth(1)
1307<6>[ 1.812723 / 01-03 07:55:02.979][4] android_enable: android_enable: checked disable_depth(2)
1308<6>[ 1.815803 / 01-03 07:55:02.979][4] read descriptors
1309<6>[ 1.815887 / 01-03 07:55:02.979][7] read strings
1310<6>[ 1.815926 / 01-03 07:55:02.979][7] functionfs_ready_callback: functionfs_ready_callback: config->enabled(1), dev(c3f1e800)
1311<6>[ 1.815941 / 01-03 07:55:02.979][7] android_enable: android_enable: checked disable_depth(1)
1312<13>[ 1.835441 / 01-03 07:55:02.999][5] init: Service 'set_permissive' (pid 367) exited with status 0
1313<6>[ 1.855626 / 01-03 07:55:03.019][0] mdss_fb_set_bl_brightness: value=255 -> bl_lvl=4095
1314<11>[ 1.856216 / 01-03 07:55:03.019][5] init: avc: denied { set } for property=twrp.crash_counter scontext=u:r:recovery:s0 tcontext=u:object_r:default_prop:s0 tclass=property_service
1315<6>[ 1.857128 / 01-03 07:55:03.019][0] mdss_fb_set_bl_brightness: value=255 -> bl_lvl=4095
1316<6>[ 1.857616 / 01-03 07:55:03.019][0] mdss_fb_blank_sub: mdss_fb_open+0x10c/0x194 mode:0
1317<6>[ 1.857814 / 01-03 07:55:03.019][0] mdss_fb_blank_sub: -
1318<3>[ 1.866874 / 01-03 07:55:03.029][0] [TOUCH][D][COMMON] [IN] LCD Sleep
1319<3>[ 1.866886 / 01-03 07:55:03.029][0] [TOUCH][L][COMMON] [FINGER] RELEASE<0> x = 0, y = 0, z = 0, w_m = 0, w_n = 0, o = 0
1320<3>[ 1.866890 / 01-03 07:55:03.029][0] [TOUCH][L][COMMON] [FINGER] RELEASE<1> x = 0, y = 0, z = 0, w_m = 0, w_n = 0, o = 0
1321<3>[ 1.866895 / 01-03 07:55:03.029][0] [TOUCH][L][COMMON] [FINGER] RELEASE<2> x = 0, y = 0, z = 0, w_m = 0, w_n = 0, o = 0
1322<3>[ 1.866899 / 01-03 07:55:03.029][0] [TOUCH][L][COMMON] [FINGER] RELEASE<3> x = 0, y = 0, z = 0, w_m = 0, w_n = 0, o = 0
1323<3>[ 1.866903 / 01-03 07:55:03.029][0] [TOUCH][L][COMMON] [FINGER] RELEASE<4> x = 0, y = 0, z = 0, w_m = 0, w_n = 0, o = 0
1324<3>[ 1.866907 / 01-03 07:55:03.029][0] [TOUCH][L][COMMON] [FINGER] RELEASE<5> x = 0, y = 0, z = 0, w_m = 0, w_n = 0, o = 0
1325<3>[ 1.866911 / 01-03 07:55:03.029][0] [TOUCH][L][COMMON] [FINGER] RELEASE<6> x = 0, y = 0, z = 0, w_m = 0, w_n = 0, o = 0
1326<3>[ 1.866916 / 01-03 07:55:03.029][0] [TOUCH][L][COMMON] [FINGER] RELEASE<7> x = 0, y = 0, z = 0, w_m = 0, w_n = 0, o = 0
1327<3>[ 1.866920 / 01-03 07:55:03.029][0] [TOUCH][L][COMMON] [FINGER] RELEASE<8> x = 0, y = 0, z = 0, w_m = 0, w_n = 0, o = 0
1328<3>[ 1.866924 / 01-03 07:55:03.029][0] [TOUCH][L][COMMON] [FINGER] RELEASE<9> x = 0, y = 0, z = 0, w_m = 0, w_n = 0, o = 0
1329<3>[ 1.866926 / 01-03 07:55:03.029][0] [TOUCH][L][COMMON] all finger released
1330<3>[ 1.866930 / 01-03 07:55:03.029][0] [TOUCH][E][COMMON] DecideNextDriverState() line=744 : Invalid Mode Setting ( mode = -1 )
1331<3>[ 1.866934 / 01-03 07:55:03.029][0] [TOUCH][F][MIT300] MIT300_SetLpwgMode()
1332<3>[ 1.866936 / 01-03 07:55:03.029][0] [TOUCH][F][MIT300] lpwg_control()
1333<3>[ 1.868086 / 01-03 07:55:03.029][0] [TOUCH][L][MIT300] SET Active Area X1 = 60, Y1 = 60, X2 = 660, Y2 = 1220
1334<3>[ 1.869183 / 01-03 07:55:03.029][0] [TOUCH][L][MISC] Interrupt Enabled
1335<3>[ 1.869186 / 01-03 07:55:03.029][0] [TOUCH][L][MIT300] device was set to KNOCK_ON_CODE
1336<3>[ 1.869188 / 01-03 07:55:03.029][0] [TOUCH][L][COMMON] STATE = KNOCK_ON_CODE
1337<6>[ 1.869201 / 01-03 07:55:03.029][0] mdss_fb_blank_sub: fb_blank+0x54/0x88 mode:4
1338<6>[ 1.869303 / 01-03 07:55:03.029][0] mdss_fb_blank_sub: -
1339<6>[ 1.869459 / 01-03 07:55:03.029][0] mdss_fb_blank_sub: fb_blank+0x54/0x88 mode:0
1340<6>[ 1.869582 / 01-03 07:55:03.029][0] mdss_fb_blank_sub: -
1341<3>[ 1.869585 / 01-03 07:55:03.029][0] [TOUCH][D][COMMON] [OUT] LCD Sleep
1342<3>[ 1.869587 / 01-03 07:55:03.029][0] [TOUCH][F][MIT300] MIT300_SetLpwgMode()
1343<3>[ 1.869590 / 01-03 07:55:03.029][0] [TOUCH][F][MIT300] lpwg_control()
1344<3>[ 1.869592 / 01-03 07:55:03.029][0] [TOUCH][L][MIT300] device was set to NORMAL
1345<3>[ 1.869594 / 01-03 07:55:03.029][0] [TOUCH][L][COMMON] STATE = NORMAL
1346<3>[ 1.869628 / 01-03 07:55:03.029][5] [TOUCH][L][MISC] Interrupt Disabled
1347<3>[ 1.869641 / 01-03 07:55:03.029][5] [TOUCH][L][COMMON] [FINGER] RELEASE<0> x = 0, y = 0, z = 0, w_m = 0, w_n = 0, o = 0
1348<3>[ 1.869652 / 01-03 07:55:03.029][5] [TOUCH][L][COMMON] [FINGER] RELEASE<1> x = 0, y = 0, z = 0, w_m = 0, w_n = 0, o = 0
1349<3>[ 1.869663 / 01-03 07:55:03.029][5] [TOUCH][L][COMMON] [FINGER] RELEASE<2> x = 0, y = 0, z = 0, w_m = 0, w_n = 0, o = 0
1350<3>[ 1.869675 / 01-03 07:55:03.029][5] [TOUCH][L][COMMON] [FINGER] RELEASE<3> x = 0, y = 0, z = 0, w_m = 0, w_n = 0, o = 0
1351<3>[ 1.869686 / 01-03 07:55:03.029][5] [TOUCH][L][COMMON] [FINGER] RELEASE<4> x = 0, y = 0, z = 0, w_m = 0, w_n = 0, o = 0
1352<3>[ 1.869697 / 01-03 07:55:03.029][5] [TOUCH][L][COMMON] [FINGER] RELEASE<5> x = 0, y = 0, z = 0, w_m = 0, w_n = 0, o = 0
1353<3>[ 1.869708 / 01-03 07:55:03.029][5] [TOUCH][L][COMMON] [FINGER] RELEASE<6> x = 0, y = 0, z = 0, w_m = 0, w_n = 0, o = 0
1354<3>[ 1.869720 / 01-03 07:55:03.029][5] [TOUCH][L][COMMON] [FINGER] RELEASE<7> x = 0, y = 0, z = 0, w_m = 0, w_n = 0, o = 0
1355<3>[ 1.869731 / 01-03 07:55:03.029][5] [TOUCH][L][COMMON] [FINGER] RELEASE<8> x = 0, y = 0, z = 0, w_m = 0, w_n = 0, o = 0
1356<3>[ 1.869742 / 01-03 07:55:03.029][5] [TOUCH][L][COMMON] [FINGER] RELEASE<9> x = 0, y = 0, z = 0, w_m = 0, w_n = 0, o = 0
1357<3>[ 1.869751 / 01-03 07:55:03.029][5] [TOUCH][L][COMMON] all finger released
1358<3>[ 1.869760 / 01-03 07:55:03.029][5] [TOUCH][L][COMMON] STATE = NORMAL
1359<3>[ 1.869777 / 01-03 07:55:03.029][5] [TOUCH][L][MISC] Interrupt Enabled
1360<6>[ 1.870083 / 01-03 07:55:03.039][0] SMBCHG: smbchg_monitor_batt_temp: first_soc_est_done is not true
1361<3>[ 1.899436 / 01-03 07:55:03.059][0] [TOUCH][D][COMMON] [IN] LCD Sleep
1362<3>[ 1.899453 / 01-03 07:55:03.059][0] [TOUCH][L][COMMON] [FINGER] RELEASE<0> x = 0, y = 0, z = 0, w_m = 0, w_n = 0, o = 0
1363<3>[ 1.899457 / 01-03 07:55:03.059][0] [TOUCH][L][COMMON] [FINGER] RELEASE<1> x = 0, y = 0, z = 0, w_m = 0, w_n = 0, o = 0
1364<3>[ 1.899461 / 01-03 07:55:03.059][0] [TOUCH][L][COMMON] [FINGER] RELEASE<2> x = 0, y = 0, z = 0, w_m = 0, w_n = 0, o = 0
1365<3>[ 1.899466 / 01-03 07:55:03.059][0] [TOUCH][L][COMMON] [FINGER] RELEASE<3> x = 0, y = 0, z = 0, w_m = 0, w_n = 0, o = 0
1366<3>[ 1.899470 / 01-03 07:55:03.059][0] [TOUCH][L][COMMON] [FINGER] RELEASE<4> x = 0, y = 0, z = 0, w_m = 0, w_n = 0, o = 0
1367<3>[ 1.899474 / 01-03 07:55:03.059][0] [TOUCH][L][COMMON] [FINGER] RELEASE<5> x = 0, y = 0, z = 0, w_m = 0, w_n = 0, o = 0
1368<3>[ 1.899478 / 01-03 07:55:03.059][0] [TOUCH][L][COMMON] [FINGER] RELEASE<6> x = 0, y = 0, z = 0, w_m = 0, w_n = 0, o = 0
1369<3>[ 1.899483 / 01-03 07:55:03.059][0] [TOUCH][L][COMMON] [FINGER] RELEASE<7> x = 0, y = 0, z = 0, w_m = 0, w_n = 0, o = 0
1370<3>[ 1.899487 / 01-03 07:55:03.059][0] [TOUCH][L][COMMON] [FINGER] RELEASE<8> x = 0, y = 0, z = 0, w_m = 0, w_n = 0, o = 0
1371<3>[ 1.899491 / 01-03 07:55:03.059][0] [TOUCH][L][COMMON] [FINGER] RELEASE<9> x = 0, y = 0, z = 0, w_m = 0, w_n = 0, o = 0
1372<3>[ 1.899494 / 01-03 07:55:03.059][0] [TOUCH][L][COMMON] all finger released
1373<3>[ 1.899497 / 01-03 07:55:03.059][0] [TOUCH][E][COMMON] DecideNextDriverState() line=744 : Invalid Mode Setting ( mode = -1 )
1374<3>[ 1.899499 / 01-03 07:55:03.059][0] [TOUCH][F][MIT300] MIT300_SetLpwgMode()
1375<3>[ 1.899501 / 01-03 07:55:03.059][0] [TOUCH][F][MIT300] lpwg_control()
1376<3>[ 1.899953 / 01-03 07:55:03.059][4] [TOUCH][L][MIT300] SET Active Area X1 = 60, Y1 = 60, X2 = 660, Y2 = 1220
1377<3>[ 1.901078 / 01-03 07:55:03.069][4] [TOUCH][L][MISC] Interrupt Enabled
1378<3>[ 1.901081 / 01-03 07:55:03.069][4] [TOUCH][L][MIT300] device was set to KNOCK_ON_CODE
1379<3>[ 1.901084 / 01-03 07:55:03.069][4] [TOUCH][L][COMMON] STATE = KNOCK_ON_CODE
1380<6>[ 1.901095 / 01-03 07:55:03.069][4] mdss_fb_blank_sub: fb_blank+0x54/0x88 mode:4
1381<6>[ 1.916737 / 01-03 07:55:03.079][5] lge_set_display_power_ctrl: display_power_ctrl [0]
1382<6>[ 1.916748 / 01-03 07:55:03.079][5] mdss_dsi_panel_off: ctrl=ec477010 ndx=0
1383<6>[ 2.389582 / 01-03 07:55:03.549][0] FG: update_sram_data: soc:[50], soc_raw[3667], voltage:[3633859], ocv:[3791939], current:[985559], batt_temp:[200], charge_raw [0 / 0]
1384<6>[ 2.390200 / 01-03 07:55:03.559][0] FG: update_temp_data: batt temp was changed !! 0 => 341
1385<6>[ 2.390251 / 01-03 07:55:03.559][0] FG: delayed_init_work: FG: HW_init success
1386<6>[ 2.390427 / 01-03 07:55:03.559][0] FG: set_prop_enable_charging: disabling charging
1387<6>[ 2.390934 / 01-03 07:55:03.559][0] FG: slope_limiter_work: Slope limit sts: 3 val: 6000000 buf[0 8a] written
1388<6>[ 2.393912 / 01-03 07:55:03.559][5] mdss_dsi_panel_off:-
1389<6>[ 2.398032 / 01-03 07:55:03.559][0] FG: update_sram_data: soc:[50], soc_raw[3667], voltage:[3633859], ocv:[3791939], current:[985559], batt_temp:[341], charge_raw [0 / 0]
1390<6>[ 2.437196 / 01-03 07:55:03.599][5] mdss_dsi_panel_reset: + enable = 0 (override: ph2n_tmo_us)
1391<6>[ 2.437199 / 01-03 07:55:03.599][5] mdss_dsi_panel_reset: -
1392<6>[ 2.439481 / 01-03 07:55:03.599][5] mdss_fb_blank_sub: -
1393<6>[ 2.439947 / 01-03 07:55:03.599][5] mdss_fb_blank_sub: fb_blank+0x54/0x88 mode:0
1394<6>[ 2.453675 / 01-03 07:55:03.619][4] mdss_dsi_panel_reset: + enable = 1 (override: ph2n_tmo_us)
1395<6>[ 2.453678 / 01-03 07:55:03.619][4] [LCD] Start LCD reset pin down when LCD on
1396<3>[ 2.453694 / 01-03 07:55:03.619][4] [TOUCH][L][MISC] Interrupt Disabled
1397<3>[ 2.453702 / 01-03 07:55:03.619][4] [TOUCH][L][MISC] Reset Pin was set to LOW
1398<3>[ 2.460779 / 01-03 07:55:03.629][4] [TOUCH][L][MISC] Reset Pin was set to HIGH
1399<3>[ 2.520103 / 01-03 07:55:03.689][4] [TOUCH][L][MISC] Interrupt Enabled
1400<3>[ 2.520943 / 01-03 07:55:03.689][4] [TOUCH][L][MIT300] MIT300_Set_CoverMode status=0
1401<6>[ 2.520946 / 01-03 07:55:03.689][4] mdss_dsi_panel_reset: -
1402<6>[ 2.520977 / 01-03 07:55:03.689][4] mdss_dsi_panel_on: ndx=0 cmd_cnt=34
1403<6>[ 2.753704 / 01-03 07:55:03.919][4] lge_mdss_dsi_panel_send_on_cmds: reader_mode (0).
1404<6>[ 2.754401 / 01-03 07:55:03.919][4] mdss_fb_blank_sub: -
1405<3>[ 2.754405 / 01-03 07:55:03.919][4] [TOUCH][D][COMMON] [OUT] LCD Sleep
1406<3>[ 2.754408 / 01-03 07:55:03.919][4] [TOUCH][F][MIT300] MIT300_SetLpwgMode()
1407<3>[ 2.754411 / 01-03 07:55:03.919][4] [TOUCH][F][MIT300] lpwg_control()
1408<3>[ 2.754414 / 01-03 07:55:03.919][4] [TOUCH][L][MIT300] device was set to NORMAL
1409<3>[ 2.754416 / 01-03 07:55:03.919][4] [TOUCH][L][COMMON] STATE = NORMAL
1410<3>[ 2.754438 / 01-03 07:55:03.919][4] [TOUCH][L][MISC] Interrupt Disabled
1411<3>[ 2.754446 / 01-03 07:55:03.919][4] [TOUCH][L][COMMON] [FINGER] RELEASE<0> x = 0, y = 0, z = 0, w_m = 0, w_n = 0, o = 0
1412<3>[ 2.754451 / 01-03 07:55:03.919][4] [TOUCH][L][COMMON] [FINGER] RELEASE<1> x = 0, y = 0, z = 0, w_m = 0, w_n = 0, o = 0
1413<3>[ 2.754457 / 01-03 07:55:03.919][4] [TOUCH][L][COMMON] [FINGER] RELEASE<2> x = 0, y = 0, z = 0, w_m = 0, w_n = 0, o = 0
1414<3>[ 2.754462 / 01-03 07:55:03.919][4] [TOUCH][L][COMMON] [FINGER] RELEASE<3> x = 0, y = 0, z = 0, w_m = 0, w_n = 0, o = 0
1415<3>[ 2.754468 / 01-03 07:55:03.919][4] [TOUCH][L][COMMON] [FINGER] RELEASE<4> x = 0, y = 0, z = 0, w_m = 0, w_n = 0, o = 0
1416<3>[ 2.754473 / 01-03 07:55:03.919][4] [TOUCH][L][COMMON] [FINGER] RELEASE<5> x = 0, y = 0, z = 0, w_m = 0, w_n = 0, o = 0
1417<3>[ 2.754478 / 01-03 07:55:03.919][4] [TOUCH][L][COMMON] [FINGER] RELEASE<6> x = 0, y = 0, z = 0, w_m = 0, w_n = 0, o = 0
1418<3>[ 2.754484 / 01-03 07:55:03.919][4] [TOUCH][L][COMMON] [FINGER] RELEASE<7> x = 0, y = 0, z = 0, w_m = 0, w_n = 0, o = 0
1419<3>[ 2.754489 / 01-03 07:55:03.919][4] [TOUCH][L][COMMON] [FINGER] RELEASE<8> x = 0, y = 0, z = 0, w_m = 0, w_n = 0, o = 0
1420<3>[ 2.754495 / 01-03 07:55:03.919][4] [TOUCH][L][COMMON] [FINGER] RELEASE<9> x = 0, y = 0, z = 0, w_m = 0, w_n = 0, o = 0
1421<3>[ 2.754497 / 01-03 07:55:03.919][4] [TOUCH][L][COMMON] all finger released
1422<3>[ 2.754500 / 01-03 07:55:03.919][4] [TOUCH][L][COMMON] STATE = NORMAL
1423<3>[ 2.754516 / 01-03 07:55:03.919][4] [TOUCH][L][MISC] Interrupt Enabled
1424<6>[ 2.754958 / 01-03 07:55:03.919][4] mdss_fb_set_bl_brightness: value=255 -> bl_lvl=4095
1425<6>[ 2.854489 / 01-03 07:55:04.019][4] EXT4-fs (mmcblk0p65): recovery complete
1426<6>[ 2.855448 / 01-03 07:55:04.019][4] EXT4-fs (mmcblk0p65): mounted filesystem with ordered data mode. Opts:
1427<7>[ 2.855482 / 01-03 07:55:04.019][4] SELinux: initialized (dev mmcblk0p65, type ext4), uses xattr
1428<6>[ 2.870108 / 01-03 07:55:04.039][0] SMBCHG: smbchg_monitor_batt_temp: first_soc_est_done is not true
1429<6>[ 2.891094 / 01-03 07:55:04.059][6] EXT4-fs (mmcblk0p65): mounted filesystem with ordered data mode. Opts:
1430<7>[ 2.891129 / 01-03 07:55:04.059][6] SELinux: initialized (dev mmcblk0p65, type ext4), uses xattr
1431<6>[ 2.929930 / 01-03 07:55:04.089][4] EXT4-fs (mmcblk0p63): recovery complete
1432<6>[ 2.930875 / 01-03 07:55:04.099][4] EXT4-fs (mmcblk0p63): mounted filesystem with ordered data mode. Opts:
1433<7>[ 2.930907 / 01-03 07:55:04.099][4] SELinux: initialized (dev mmcblk0p63, type ext4), uses xattr
1434<6>[ 2.931013 / 01-03 07:55:04.099][4] SELinux: Context u:object_r:cache_recovery_file:s0 is not valid (left unmapped).
1435<6>[ 2.940350 / 01-03 07:55:04.109][6] EXT4-fs (mmcblk0p62): mounted filesystem with ordered data mode. Opts:
1436<7>[ 2.940383 / 01-03 07:55:04.109][6] SELinux: initialized (dev mmcblk0p62, type ext4), uses xattr
1437<6>[ 2.944172 / 01-03 07:55:04.109][6] SELinux: Context u:object_r:bluetooth_logs_data_file:s0 is not valid (left unmapped).
1438<6>[ 2.947234 / 01-03 07:55:04.109][6] SELinux: Context u:object_r:audioserver_data_file:s0 is not valid (left unmapped).
1439<6>[ 2.947548 / 01-03 07:55:04.109][6] SELinux: Context u:object_r:boottrace_data_file:s0 is not valid (left unmapped).
1440<6>[ 2.947684 / 01-03 07:55:04.109][6] SELinux: Context u:object_r:update_engine_data_file:s0 is not valid (left unmapped).
1441<6>[ 2.947820 / 01-03 07:55:04.109][6] SELinux: Context u:object_r:method_trace_data_file:s0 is not valid (left unmapped).
1442<6>[ 2.948055 / 01-03 07:55:04.109][6] SELinux: Context u:object_r:user_profile_data_file:s0 is not valid (left unmapped).
1443<6>[ 2.948304 / 01-03 07:55:04.109][6] SELinux: Context u:object_r:profman_dump_data_file:s0 is not valid (left unmapped).
1444<6>[ 2.955951 / 01-03 07:55:04.119][6] SELinux: Context u:object_r:ota_data_file:s0 is not valid (left unmapped).
1445<6>[ 2.956628 / 01-03 07:55:04.119][6] SELinux: Context u:object_r:ota_package_file:s0 is not valid (left unmapped).
1446<6>[ 2.967848 / 01-03 07:55:04.129][6] SELinux: Context u:object_r:cache_private_backup_file:s0 is not valid (left unmapped).
1447<7>[ 2.977644 / 01-03 07:55:04.139][6] SELinux: initialized (dev mmcblk0p1, type vfat), uses genfs_contexts
1448<6>[ 2.990778 / 01-03 07:55:04.159][4] EXT4-fs (mmcblk0p33): recovery complete
1449<6>[ 2.991716 / 01-03 07:55:04.159][4] EXT4-fs (mmcblk0p33): mounted filesystem with ordered data mode. Opts:
1450<7>[ 2.991746 / 01-03 07:55:04.159][4] SELinux: initialized (dev mmcblk0p33, type ext4), uses xattr
1451<6>[ 2.991787 / 01-03 07:55:04.159][4] SELinux: Context u:object_r:persist_file:s0 is not valid (left unmapped).
1452<6>[ 3.807551 / 01-03 07:55:04.969][0] mdss_fb_set_bl_brightness: value=255 -> bl_lvl=4095
1453<11>[ 3.811797 / 01-03 07:55:04.000][5] init: avc: denied { set } for property=sys.usb.config scontext=u:r:recovery:s0 tcontext=u:object_r:system_radio_prop:s0 tclass=property_service
1454<6>[ 3.811929 / 01-03 07:55:04.000][5] android_usb android0: gadget enable(0)
1455<6>[ 3.811947 / 01-03 07:55:04.000][5] android_disable: android_disable: checked disable_depth(0)
1456<6>[ 3.815856 / 01-03 07:55:04.000][5] msm_otg 78db000.usb: phy_reset: success
1457<6>[ 3.870081 / 01-03 07:55:04.049][0] SMBCHG: smbchg_monitor_batt_temp: first_soc_est_done is not true
1458<6>[ 3.920450 / 01-03 07:55:04.099][4] msm_otg 78db000.usb: USB exited from low power mode
1459<6>[ 3.920494 / 01-03 07:55:04.099][4] ffs_function_disable: ffs_function_disable: config->opened(1)
1460<6>[ 3.920753 / 01-03 07:55:04.099][4] android_usb android0: gadget enable(0)
1461<6>[ 3.920811 / 01-03 07:55:04.099][4] android_usb android0: LGE-USB request function list: mtp,adb
1462<6>[ 3.920869 / 01-03 07:55:04.099][4] android_usb android0: gadget enable(1)
1463<6>[ 3.920885 / 01-03 07:55:04.099][4] ffs_function_enable: ffs_function_enable: config->opened(1)
1464<6>[ 3.920899 / 01-03 07:55:04.099][4] android_enable: android_enable: checked disable_depth(1)
1465<6>[ 3.920912 / 01-03 07:55:04.099][4] mtp_bind_config
1466<6>[ 3.922902 / 01-03 07:55:04.099][4] msm_otg 78db000.usb: USB in low power mode
1467<6>[ 4.390157 / 01-03 07:55:04.569][0] FG: fg_batt_profile_init: battery id = 100613
1468<6>[ 4.390180 / 01-03 07:55:04.569][0] FG: update_battery_type: [FG_EST]:battery_id : 204
1469<6>[ 4.390191 / 01-03 07:55:04.569][0] FG: update_battery_type: [FG_EST]:use battery type : LGE_BL45B1F_Tocad_3000mAh
1470<6>[ 4.390211 / 01-03 07:55:04.569][0] of_batterydata_get_best_profile: [FG_EST]:LGE_BL45B1F_Tocad_3000mAh found
1471<6>[ 4.400253 / 01-03 07:55:04.579][0] FG: fg_set_minfreq: Set minfreq enable
1472<6>[ 4.400271 / 01-03 07:55:04.579][0] FG: fg_batt_profile_init: [FG_EST]:vbat_est_diff=3967,v_current_pred=3637826,v=3633859
1473<6>[ 4.400287 / 01-03 07:55:04.579][0] FG: fg_batt_profile_init: [FG_EST]:Battery profile not same, new battery
1474<6>[ 4.401612 / 01-03 07:55:04.579][0] FG: fg_batt_profile_init: [FG_EST]:profiles differ
1475<6>[ 4.401628 / 01-03 07:55:04.579][0] FG: fg_batt_profile_init: [FG_EST]:Using new profile
1476<6>[ 4.401645 / 01-03 07:55:04.579][0] FG: loaded profile: 10 88 10 7f a3 82 2e 7d 6e 83 15 77 b5 89 62 8f
1477<6>[ 4.401660 / 01-03 07:55:04.579][0] FG: loaded profile: 9e 81 00 9a f7 b6 6f c1 66 1a 08 88 46 7e 47 82
1478<6>[ 4.401674 / 01-03 07:55:04.579][0] FG: loaded profile: f4 7c 5a 83 c1 65 0e 88 fd 8e 5b 82 cd 93 09 b5
1479<6>[ 4.401689 / 01-03 07:55:04.579][0] FG: loaded profile: 6b c0 58 16 3f 0b 60 5b cd 6e 52 f8 3e 47 af 4d
1480<6>[ 4.401704 / 01-03 07:55:04.579][0] FG: loaded profile: da 4a 18 28 23 55 18 3c 1f 51 18 28 00 00 00 00
1481<6>[ 4.401718 / 01-03 07:55:04.579][0] FG: loaded profile: 00 00 00 00 89 6a 6d 6a 5f 7b d8 88 10 75 2b 61
1482<6>[ 4.401733 / 01-03 07:55:04.579][0] FG: loaded profile: 21 66 e7 78 84 75 38 62 00 00 00 00 0a 61 60 a7
1483<6>[ 4.401747 / 01-03 07:55:04.579][0] FG: loaded profile: 5d a0 71 0c 28 00 ff 36 f0 11 30 03 00 00 00 00
1484<6>[ 4.401762 / 01-03 07:55:04.579][0] FG: new profile: d5 83 5b 7c b6 80 78 76 60 83 bd 74 0e 8a 1f 95
1485<6>[ 4.401777 / 01-03 07:55:04.579][0] FG: new profile: 08 82 4f 99 21 b7 68 c2 52 18 f4 83 ed 7c 03 81
1486<6>[ 4.401791 / 01-03 07:55:04.579][0] FG: new profile: eb 76 5c 83 85 56 fb 82 70 8e 62 82 b1 98 50 b7
1487<6>[ 4.401805 / 01-03 07:55:04.579][0] FG: new profile: aa c3 58 0f 80 0b f5 59 14 70 71 fd c3 2e 63 46
1488<6>[ 4.401820 / 01-03 07:55:04.579][0] FG: new profile: ca 41 00 00 66 47 0d 38 8e 32 00 00 00 00 00 00
1489<6>[ 4.401834 / 01-03 07:55:04.579][0] FG: new profile: 00 00 00 00 5f 71 93 70 34 64 c1 81 93 76 96 6a
1490<6>[ 4.401849 / 01-03 07:55:04.579][0] FG: new profile: da 66 60 7a 8a 75 06 69 0c 74 4d b1 21 49 69 83
1491<6>[ 4.401863 / 01-03 07:55:04.579][0] FG: new profile: 67 a0 71 0c 28 00 ff 36 f0 11 30 03 00 00 00 0c
1492<6>[ 4.401877 / 01-03 07:55:04.579][0] FG: fg_do_restart: restarting fuel gauge...
1493<6>[ 4.412503 / 01-03 07:55:04.589][0] FG: fg_config_imptr_pulse: imptr_pulse_slow is disabled
1494<6>[ 4.722462 / 01-03 07:55:04.909][4] mtp_open
1495<6>[ 4.870113 / 01-03 07:55:05.049][0] SMBCHG: smbchg_monitor_batt_temp: first_soc_est_done is not true
1496<3>[ 5.416128 / 01-03 07:55:05.599][7] [TOUCH][L][COMMON] [FINGER] RELEASE<0> x = 37, y = 785, z = 42, w_m = 9, w_n = 3, o = 0
1497<6>[ 5.416475 / 01-03 07:55:05.599][1] qcom,qpnp-haptic qpnp-haptic-25: qpnp_hap_play: on = 1, voltage = 3364
1498<6>[ 5.496488 / 01-03 07:55:05.669][1] qcom,qpnp-haptic qpnp-haptic-25: qpnp_hap_play: on = 0, voltage = 3364
1499<6>[ 5.870104 / 01-03 07:55:06.049][0] SMBCHG: smbchg_monitor_batt_temp: first_soc_est_done is not true
1500<3>[ 6.252969 / 01-03 07:55:06.439][7] [TOUCH][L][COMMON] [FINGER] PRESS <0> x = 135, y = 1086, z = 139, w_m = 10, w_n = 8, o = 0
1501<5>[ 6.253135 / 01-03 07:55:06.439][7] random: nonblocking pool is initialized
1502<6>[ 6.870129 / 01-03 07:55:07.049][0] SMBCHG: smbchg_monitor_batt_temp: first_soc_est_done is not true
1503<3>[ 7.237491 / 01-03 07:55:07.409][7] [TOUCH][L][COMMON] [FINGER] RELEASE<0> x = 676, y = 1136, z = 135, w_m = 10, w_n = 5, o = 0
1504<6>[ 7.249477 / 01-03 07:55:07.429][5] qcom,qpnp-haptic qpnp-haptic-25: qpnp_hap_play: on = 1, voltage = 3364
1505<4>[ 7.301280 / 01-03 07:55:07.479][5] audit_printk_skb: 336 callbacks suppressed
1506<5>[ 7.301312 / 01-03 07:55:07.479][5] audit: type=1400 audit(1451807707.479:123): avc: denied { unlink } for pid=368 comm="recovery" name="orsin" dev="rootfs" ino=5179 scontext=u:r:recovery:s0 tcontext=u:object_r:rootfs:s0 tclass=fifo_file permissive=1
1507<6>[ 7.329505 / 01-03 07:55:07.499][5] qcom,qpnp-haptic qpnp-haptic-25: qpnp_hap_play: on = 0, voltage = 3364
1508<6>[ 7.870113 / 01-03 07:55:08.049][0] SMBCHG: smbchg_monitor_batt_temp: first_soc_est_done is not true
1509<3>[ 7.907251 / 01-03 07:55:08.079][7] [TOUCH][L][COMMON] [FINGER] PRESS <0> x = 264, y = 1087, z = 145, w_m = 11, w_n = 7, o = 0
1510<6>[ 7.907602 / 01-03 07:55:08.079][5] qcom,qpnp-haptic qpnp-haptic-25: qpnp_hap_play: on = 1, voltage = 3364
1511<3>[ 7.972703 / 01-03 07:55:08.149][7] [TOUCH][L][COMMON] [FINGER] RELEASE<0> x = 262, y = 1083, z = 47, w_m = 7, w_n = 6, o = 0
1512<6>[ 7.987604 / 01-03 07:55:08.159][5] qcom,qpnp-haptic qpnp-haptic-25: qpnp_hap_play: on = 0, voltage = 3364
1513<6>[ 8.448479 / 01-03 07:55:08.619][0] FG: fg_first_soc_irq_handler: triggered
1514<6>[ 8.448625 / 01-03 07:55:08.619][0] FG: set_prop_enable_charging: enabling charging
1515<6>[ 8.448640 / 01-03 07:55:08.619][0] FG: fg_do_restart: done!
1516<6>[ 8.449889 / 01-03 07:55:08.619][0] of_batterydata_get_best_profile: [FG_EST]:LGE_BL45B1F_Tocad_3000mAh found
1517<6>[ 8.449958 / 01-03 07:55:08.619][0] SMBCHG: read_usb_type: src det low
1518<6>[ 8.449997 / 01-03 07:55:08.619][0] SMBCHG: smbchg_vfloat_adjust_check: Starting vfloat adjustments
1519<6>[ 8.450206 / 01-03 07:55:08.629][0] FG: fg_age_detection: battery age not init
1520<6>[ 8.450858 / 01-03 07:55:08.629][0] SMBCHG: smbchg_vfloat_adjust_work: Stopping vfloat adj taper=0 parallel_ma = 0
1521<6>[ 8.451071 / 01-03 07:55:08.629][0] FG: fg_age_detection: battery age not init
1522<6>[ 8.451110 / 01-03 07:55:08.629][0] SMBCHG: smbchg_calc_max_flash_current: avail_iflash=1373727, ocv=3791939, ibat=485856, rbatt=256127
1523<6>[ 8.452131 / 01-03 07:55:08.629][0] FG: fg_set_minfreq: Set minfreq disable
1524<6>[ 8.452168 / 01-03 07:55:08.629][0] FG: update_chg_iterm: current = -100, converted_raw = fd71, data = 71 fd
1525<6>[ 8.452191 / 01-03 07:55:08.629][4] FG: check_update_soc_lge_5level: [FG_DELTA]:SOC_Raw=0x50,SOC_Origin=32,SOC_Scale_raw=3352,SOC_scale=33,SOC_5LEVEL_Raw=3241,SOC_5LEVEL=32,Voltage=3633,OCV=3791,current=985,temp=34
1526<6>[ 8.453069 / 01-03 07:55:08.629][4] SMBCHG: read_usb_type: src det low
1527<6>[ 8.453085 / 01-03 07:55:08.629][4] SMBCHG: smbchg_vfloat_adjust_check: Starting vfloat adjustments
1528<6>[ 8.453215 / 01-03 07:55:08.629][4] FG: fg_age_detection: battery age not init
1529<6>[ 8.453382 / 01-03 07:55:08.629][0] FG: update_cc_cv_setpoint: Wrote 62 70 to address 4f8 for CC_CV setpoint
1530<6>[ 8.453418 / 01-03 07:55:08.629][4] SMBCHG: smbchg_vfloat_adjust_work: Stopping vfloat adj taper=0 parallel_ma = 0
1531<6>[ 8.453883 / 01-03 07:55:08.629][4] FG: fg_age_detection: battery age not init
1532<6>[ 8.453930 / 01-03 07:55:08.629][4] SMBCHG: smbchg_calc_max_flash_current: avail_iflash=1292483, ocv=3791939, ibat=616896, rbatt=256127
1533<6>[ 8.455413 / 01-03 07:55:08.629][0] FG: populate_system_data: coeffs1 = 3916015 -1088867 2355468 -808593
1534<6>[ 8.455426 / 01-03 07:55:08.629][0] FG: populate_system_data: coeffs2 = 3687500 -592285 6054687 -10242187
1535<6>[ 8.455437 / 01-03 07:55:08.629][0] FG: populate_system_data: coeffs3 = 3015625 21234375 -228125000 820000000
1536<6>[ 8.457172 / 01-03 07:55:08.629][0] FG: fg_cap_learning_save_data: learned capacity 2944000 uah (2944/0xb80 uah) saved to sram
1537<6>[ 8.458947 / 01-03 07:55:08.629][0] FG: fg_calc_and_store_cc_soc_coeff: new cc_soc_coeff 5689198 [b0 89] saved to sram
1538<6>[ 8.459558 / 01-03 07:55:08.629][0] FG: populate_system_data: cutoff_voltage = 3199901, nom_cap_uah = 2944000 p1p2 = 32, p2p3 = 9
1539<6>[ 8.470539 / 01-03 07:55:08.649][0] FG: fg_batt_profile_init: soc:[32], voltage:[3633859], ocv:[3791939], current:[985559], batt_temp:[341],cycle_count : [0], residence : [156127]
1540<6>[ 8.470551 / 01-03 07:55:08.649][0] FG: fg_batt_profile_init: [FG_OPTION]first_soc_est_done flag true
1541<6>[ 8.470826 / 01-03 07:55:08.649][0] SMBCHG: read_usb_type: src det low
1542<6>[ 8.470838 / 01-03 07:55:08.649][0] SMBCHG: smbchg_vfloat_adjust_check: Starting vfloat adjustments
1543<6>[ 8.472215 / 01-03 07:55:08.649][0] SMBCHG: smbchg_vfloat_adjust_work: Stopping vfloat adj taper=0 parallel_ma = 0
1544<6>[ 8.474325 / 01-03 07:55:08.649][0] SMBCHG: smbchg_calc_max_flash_current: avail_iflash=1291123, ocv=3780190, ibat=573216, rbatt=256127
1545<6>[ 8.477705 / 01-03 07:55:08.649][0] FG: update_sram_data: soc:[32], soc_raw[3203], voltage:[3705880], ocv:[3780190], current:[539547], batt_temp:[341], charge_raw [943000 / 2944000]
1546<3>[ 8.608938 / 01-03 07:55:08.789][7] [TOUCH][L][COMMON] [FINGER] PRESS <0> x = 216, y = 299, z = 144, w_m = 11, w_n = 9, o = 0
1547<6>[ 8.609171 / 01-03 07:55:08.789][3] qcom,qpnp-haptic qpnp-haptic-25: qpnp_hap_play: on = 1, voltage = 3364
1548<6>[ 8.689177 / 01-03 07:55:08.859][3] qcom,qpnp-haptic qpnp-haptic-25: qpnp_hap_play: on = 0, voltage = 3364
1549<3>[ 8.707867 / 01-03 07:55:08.879][7] [TOUCH][L][COMMON] [FINGER] RELEASE<0> x = 223, y = 306, z = 41, w_m = 9, w_n = 5, o = 0
1550<6>[ 8.870082 / 01-03 07:55:09.049][0] SMBCHG: smbchg_monitor_batt_temp: first_soc_est_done is not true
1551<3>[ 9.193404 / 01-03 07:55:09.379][7] [TOUCH][L][COMMON] [FINGER] PRESS <0> x = 37, y = 350, z = 41, w_m = 3, w_n = 1, o = 0
1552<3>[ 9.259241 / 01-03 07:55:09.439][7] [TOUCH][L][COMMON] [FINGER] RELEASE<0> x = 48, y = 351, z = 43, w_m = 3, w_n = 2, o = 0
1553<6>[ 9.259480 / 01-03 07:55:09.439][3] qcom,qpnp-haptic qpnp-haptic-25: qpnp_hap_play: on = 1, voltage = 3364
1554<6>[ 9.339465 / 01-03 07:55:09.519][3] qcom,qpnp-haptic qpnp-haptic-25: qpnp_hap_play: on = 0, voltage = 3364
1555<3>[ 9.744922 / 01-03 07:55:09.919][7] [TOUCH][L][COMMON] [FINGER] PRESS <0> x = 52, y = 343, z = 141, w_m = 11, w_n = 6, o = 0
1556<3>[ 9.844053 / 01-03 07:55:10.019][7] [TOUCH][L][COMMON] [FINGER] RELEASE<0> x = 52, y = 345, z = 43, w_m = 9, w_n = 4, o = 0
1557<6>[ 9.844305 / 01-03 07:55:10.019][4] qcom,qpnp-haptic qpnp-haptic-25: qpnp_hap_play: on = 1, voltage = 3364
1558<3>[ 9.870107 / 01-03 07:55:10.049][0] LGE charging scenario : state 0 -> 0(0-1), temp=34, volt=3705, BTM=0, charger=0, cur_set=1200/1200, chg_cur = 539
1559<6>[ 9.870114 / 01-03 07:55:10.049][0] SMBCHG: smbchg_monitor_batt_temp: batt temp = 34, batt volt = 3705880, pre_otp_ibat = 2000, otp_ibat = 1200
1560<6>[ 9.870116 / 01-03 07:55:10.049][0] SMBCHG: smbchg_monitor_batt_temp: set otp_ibat to 1200
1561<6>[ 9.870375 / 01-03 07:55:10.049][0] SMBCHG: smbchg_calc_max_flash_current: avail_iflash=1440764, ocv=3780190, ibat=485856, rbatt=242089
1562<6>[ 9.924309 / 01-03 07:55:10.099][4] qcom,qpnp-haptic qpnp-haptic-25: qpnp_hap_play: on = 0, voltage = 3364
1563<5>[ 10.200171 / 01-03 07:55:10.379][4] pet_watchdog
1564<3>[ 10.580811 / 01-03 07:55:10.759][7] [TOUCH][L][COMMON] [FINGER] PRESS <0> x = 197, y = 1080, z = 140, w_m = 14, w_n = 11, o = 0
1565<3>[ 11.080511 / 01-03 07:55:11.259][7] [TOUCH][L][COMMON] [FINGER] RELEASE<0> x = 701, y = 1083, z = 20, w_m = 7, w_n = 3, o = 0
1566<6>[ 11.080755 / 01-03 07:55:11.259][1] qcom,qpnp-haptic qpnp-haptic-25: qpnp_hap_play: on = 1, voltage = 3364
1567<5>[ 11.081889 / 01-03 07:55:11.259][1] audit: type=1400 audit(1451807711.259:124): avc: denied { create } for pid=368 comm="recovery" name="recovery.log" scontext=u:r:recovery:s0 tcontext=u:object_r:system_data_file:s0 tclass=file permissive=1
1568<5>[ 11.082055 / 01-03 07:55:11.259][1] audit: type=1400 audit(1451807711.259:125): avc: denied { write open } for pid=368 comm="recovery" path="/data/media/recovery.log" dev="mmcblk0p65" ino=340709 scontext=u:r:recovery:s0 tcontext=u:object_r:system_data_file:s0 tclass=file permissive=1
1569<5>[ 11.082705 / 01-03 07:55:11.259][1] audit: type=1400 audit(1451807711.259:126): avc: denied { setattr } for pid=368 comm="recovery" name="recovery.log" dev="mmcblk0p65" ino=340709 scontext=u:r:recovery:s0 tcontext=u:object_r:system_data_file:s0 tclass=file permissive=1
1570<5>[ 11.082758 / 01-03 07:55:11.259][1] audit: type=1400 audit(1451807711.259:127): avc: denied { relabelfrom } for pid=368 comm="recovery" name="recovery.log" dev="mmcblk0p65" ino=340709 scontext=u:r:recovery:s0 tcontext=u:object_r:system_data_file:s0 tclass=file permissive=1
1571<5>[ 11.082794 / 01-03 07:55:11.259][1] audit: type=1400 audit(1451807711.259:128): avc: denied { relabelto } for pid=368 comm="recovery" name="recovery.log" dev="mmcblk0p65" ino=340709 scontext=u:r:recovery:s0 tcontext=u:object_r:system_data_file:s0 tclass=file permissive=1