· 8 years ago · May 01, 2018, 07:48 PM
1U-Boot 2011.09-01172-gfdbe8b9-dirty (Nov 29 2011 - 11:38:19)
2
3OMAP3630/3730-GP ES1.2, CPU-OPP2, L3-165MHz, Max CPU Clock 1 Ghz
4OMAP3 Beagle board + LPDDR/NAND
5I2C: ready
6DRAM: 512 MiB
7WARNING: Caches not enabled
8NAND: 0 MiB
9MMC: OMAP SD/MMC: 0
10*** Warning - readenv() failed, using default environment
11
12In: serial
13Out: serial
14Err: serial
15Beagle xM Rev C
16No EEPROM on expansion board
17No EEPROM on expansion board
18Die ID #6f2e00029ff80000016830c40500e01b
19Net: Net Initialization Skipped
20No ethernet found.
21Hit any key to stop autoboot: 0
22The user button is currently NOT pressed.
23SD/MMC found on device 0
24reading uEnv.txt
25
26800 bytes read
27Loaded environment from uEnv.txt
28Importing environment from mmc ...
29reading uImage
30
313137576 bytes read
32reading uInitrd
33
343097317 bytes read
35Booting from mmc ...
36## Booting kernel from Legacy Image at 80300000 ...
37 Image Name: 3.1.4-x6
38 Image Type: ARM Linux Kernel Image (uncompressed)
39 Data Size: 3137512 Bytes = 3 MiB
40 Load Address: 80008000
41 Entry Point: 80008000
42 Verifying Checksum ... OK
43## Loading init Ramdisk from Legacy Image at 81600000 ...
44 Image Name: initramfs
45 Image Type: ARM Linux RAMDisk Image (uncompressed)
46 Data Size: 3097253 Bytes = 3 MiB
47 Load Address: 00000000
48 Entry Point: 00000000
49 Verifying Checksum ... OK
50 Loading Kernel Image ... OK
51OK
52
53Starting kernel ...
54
55Uncompressing Linux... done, booting the kernel.
56[ 0.000000] Initializing cgroup subsys cpuset
57[ 0.000000] Initializing cgroup subsys cpu
58[ 0.000000] Linux version 3.1.4-x6 (root@panda-a1-1gb) (gcc version 4.6.1 (Ubuntu/Linaro 4.6.1-9ubuntu3) ) #1 SMP Sun Dec 4 12:00:23 UTC 201
59[ 0.000000] CPU: ARMv7 Processor [413fc082] revision 2 (ARMv7), cr=10c5387d
60[ 0.000000] CPU: VIPT nonaliasing data cache, VIPT aliasing instruction cache
61[ 0.000000] Machine: OMAP3 Beagle Board
62[ 0.000000] Beagle expansionboard: none
63[ 0.000000] Beagle second expansionboard: none
64[ 0.000000] Reserving 12582912 bytes SDRAM for VRAM
65[ 0.000000] Memory policy: ECC disabled, Data cache writeback
66[ 0.000000] OMAP3630 ES1.2 (l2cache iva sgx neon isp 192mhz_clk )
67[ 0.000000] SRAM: Mapped pa 0x40200000 to va 0xfe400000 size: 0x10000
68[ 0.000000] Clocking rate (Crystal/Core/MPU): 26.0/400/600 MHz
69[ 0.000000] Reprogramming SDRC clock to 400000000 Hz
70[ 0.000000] dpll3_m2_clk rate change failed: -22
71[ 0.000000] PERCPU: Embedded 8 pages/cpu @c0d62000 s11584 r8192 d12992 u32768
72[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 125440
73[ 0.000000] Kernel command line: console=ttyO2,115200n8 console=tty0 mpurate=auto buddy=none buddy2=none camera=none vram=12M omapfb.mode=dc
74[ 0.000000] PID hash table entries: 2048 (order: 1, 8192 bytes)
75[ 0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
76[ 0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
77[ 0.000000] allocated 2097152 bytes of page_cgroup
78[ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
79[ 0.000000] Memory: 494MB = 494MB total
80[ 0.000000] Memory: 486644k/486644k available, 37644k reserved, 0K highmem
81[ 0.000000] Virtual kernel memory layout:
82[ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB)
83[ 0.000000] fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB)
84[ 0.000000] DMA : 0xffc00000 - 0xffe00000 ( 2 MB)
85[ 0.000000] vmalloc : 0xe0800000 - 0xf8000000 ( 376 MB)
86[ 0.000000] lowmem : 0xc0000000 - 0xe0000000 ( 512 MB)
87[ 0.000000] pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB)
88[ 0.000000] modules : 0xbf000000 - 0xbfe00000 ( 14 MB)
89[ 0.000000] .text : 0xc0008000 - 0xc07d18d8 (7975 kB)
90[ 0.000000] .init : 0xc07d2000 - 0xc082bd40 ( 360 kB)
91[ 0.000000] .data : 0xc082c000 - 0xc0897968 ( 431 kB)
92[ 0.000000] .bss : 0xc089798c - 0xc095d704 ( 792 kB)
93[ 0.000000] SLUB: Genslabs=13, HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
94[ 0.000000] Hierarchical RCU implementation.
95[ 0.000000] NR_IRQS:410 nr_irqs:410 410
96[ 0.000000] IRQ: Found an INTC at 0xfa200000 (revision 4.0) with 96 interrupts
97[ 0.000000] Total of 96 interrupts on 1 active controller
98[ 0.000000] OMAP clockevent source: GPTIMER12 at 32768 Hz
99[ 0.000000] sched_clock: 32 bits at 32kHz, resolution 30517ns, wraps every 131071999ms
100[ 0.000000] Console: colour dummy device 80x30
101[ 0.000000] console [tty0] enabled
102[ 0.000762] Calibrating delay loop... 506.27 BogoMIPS (lpj=1978368)
103[ 0.039825] pid_max: default: 32768 minimum: 301
104[ 0.040191] Security Framework initialized
105[ 0.040283] AppArmor: AppArmor initialized
106[ 0.040618] Mount-cache hash table entries: 512
107[ 0.041778] Initializing cgroup subsys cpuacct
108[ 0.041900] Initializing cgroup subsys memory
109[ 0.041961] Initializing cgroup subsys devices
110[ 0.041992] Initializing cgroup subsys freezer
111[ 0.042022] Initializing cgroup subsys blkio
112[ 0.042083] Initializing cgroup subsys perf_event
113[ 0.042297] CPU: Testing write buffer coherency: ok
114[ 0.042694] hw perfevents: enabled with ARMv7 Cortex-A8 PMU driver, 5 counters available
115[ 0.043914] Brought up 1 CPUs
116[ 0.043945] SMP: Total of 1 processors activated (506.27 BogoMIPS).
117[ 0.045593] devtmpfs: initialized
118[ 0.052581] print_constraints: dummy:
119[ 0.053253] NET: Registered protocol family 16
120[ 0.053558] GPMC revision 5.0
121[ 0.055419] omap_device: omap_gpio.0: new worst case activate latency 0: 30517
122[ 0.055755] OMAP GPIO hardware version 2.5
123[ 0.058197] omap_mux_init: Add partition: #1: core, flags: 0
124[ 0.059539] OMAP3 Beagle Rev: xM C
125[ 0.062622] omap_device: omap_uart.0: new worst case activate latency 0: 30517
126[ 0.064208] omap_device: omap_uart.2: new worst case deactivate latency 0: 30517
127[ 0.068328] Found NAND on CS0
128[ 0.068389] Registering NAND on CS0
129[ 0.068939] Unable to get DVI reset GPIO
130[ 0.069091] hw-breakpoint: debug architecture 0x4 unsupported.
131[ 0.072357] omap_device: omap-mcbsp.2: alias fck already exists
132[ 0.072723] omap_device: omap-mcbsp.3: alias fck already exists
133[ 0.074615] OMAP DMA hardware revision 5.0
134[ 0.085113] bio: create slab <bio-0> at 0
135[ 0.087402] SCSI subsystem initialized
136[ 0.087921] omap_device: omap2_mcspi.1: new worst case activate latency 0: 30517
137[ 0.089447] usbcore: registered new interface driver usbfs
138[ 0.089721] usbcore: registered new interface driver hub
139[ 0.090118] usbcore: registered new device driver usb
140[ 0.091217] omap_device: omap_i2c.1: new worst case activate latency 0: 30517
141[ 0.091400] omap_i2c omap_i2c.1: bus 1 rev4.0 at 2600 kHz
142[ 0.095275] twl4030: PIH (irq 7) chaining IRQs 368..375
143[ 0.095367] twl4030: power (irq 373) chaining IRQs 376..383
144[ 0.096160] twl4030: gpio (irq 368) chaining IRQs 384..401
145[ 0.096740] _omap_mux_init_gpio: Could not set gpio192
146[ 0.100860] print_constraints: VUSB1V5: 1500 mV normal standby
147[ 0.101593] print_constraints: VUSB1V8: 1800 mV normal standby
148[ 0.102294] print_constraints: VUSB3V1: 3100 mV normal standby
149[ 0.105407] twl4030_usb twl4030_usb: Initialized TWL4030 USB module
150[ 0.107086] print_constraints: VMMC1: 1850 <--> 3150 mV at 3000 mV normal standby
151[ 0.107849] print_constraints: VDAC: 1800 mV normal standby
152[ 0.108642] print_constraints: VDVI: 1800 mV normal standby
153[ 0.109527] print_constraints: VSIM: 1800 <--> 3000 mV at 1800 mV normal standby
154[ 0.110107] omap_i2c omap_i2c.2: bus 2 rev4.0 at 400 kHz
155[ 0.110565] omap_device: omap_i2c.2: new worst case deactivate latency 0: 30517
156[ 0.110809] omap_i2c omap_i2c.3: bus 3 rev4.0 at 100 kHz
157[ 0.112335] Advanced Linux Sound Architecture Driver Version 1.0.24.
158[ 0.113433] NetLabel: Initializing
159[ 0.113494] NetLabel: domain hash size = 128
160[ 0.113525] NetLabel: protocols = UNLABELED CIPSOv4
161[ 0.113616] NetLabel: unlabeled traffic allowed by default
162[ 0.113708] Switching to clocksource 32k_counter
163[ 0.119750] Switched to NOHz mode on CPU #0
164[ 0.136871] AppArmor: AppArmor Filesystem Enabled
165[ 0.165710] musb-hdrc: version 6.0, ?dma?, otg (peripheral+host)
166[ 0.165924] omap_device: musb-omap2430.-1: new worst case activate latency 0: 30517
167[ 0.171813] musb-hdrc musb-hdrc: USB OTG mode controller at fa0ab000 using DMA, IRQ 92
168[ 0.172393] NET: Registered protocol family 2
169[ 0.172943] IP route cache hash table entries: 4096 (order: 2, 16384 bytes)
170[ 0.174255] TCP established hash table entries: 16384 (order: 5, 131072 bytes)
171[ 0.174682] TCP bind hash table entries: 16384 (order: 5, 131072 bytes)
172[ 0.175048] TCP: Hash tables configured (established 16384 bind 16384)
173[ 0.175109] TCP reno registered
174[ 0.175140] UDP hash table entries: 256 (order: 1, 8192 bytes)
175[ 0.175323] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes)
176[ 0.175872] NET: Registered protocol family 1
177[ 0.177459] RPC: Registered named UNIX socket transport module.
178[ 0.177520] RPC: Registered udp transport module.
179[ 0.177551] RPC: Registered tcp transport module.
180[ 0.177581] RPC: Registered tcp NFSv4.1 backchannel transport module.
181[ 0.177978] Trying to unpack rootfs image as initramfs...
182[ 0.185760] omap_device: musb-omap2430.-1: new worst case deactivate latency 0: 30517
183[ 0.599731] Freeing initrd memory: 3024K
184[ 0.599975] _regulator_get: etb supply vcore not found, using dummy regulator
185[ 0.600799] _regulator_get: etm supply vcore not found, using dummy regulator
186[ 0.601287] PMU: registered new PMU device of type 0
187[ 0.601470] omap_dsp_init: 600000 bytes @ 9ee00000
188[ 0.602661] audit: initializing netlink socket (disabled)
189[ 0.602783] type=2000 audit(0.617:1): initialized
190[ 0.833862] VFS: Disk quotas dquot_6.5.2
191[ 0.834594] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
192[ 0.844177] fuse init (API version 7.17)
193[ 0.847930] Btrfs loaded
194[ 0.848022] msgmni has been set to 956
195[ 0.851440] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
196[ 0.851531] io scheduler noop registered
197[ 0.851562] io scheduler deadline registered
198[ 0.851837] io scheduler cfq registered (default)
199[ 0.852874] omap_device: omapdss_dss.-1: new worst case activate latency 0: 30517
200[ 0.852935] OMAP DSS rev 2.0
201[ 0.852996] omap_device: omapdss_dss.-1: new worst case deactivate latency 0: 30517
202[ 0.857543] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
203[ 0.860168] omap_uart.0: ttyO0 at MMIO 0x4806a000 (irq = 72) is a OMAP UART0
204[ 0.860809] omap_uart.1: ttyO1 at MMIO 0x4806c000 (irq = 73) is a OMAP UART1
205[ 0.861450] omap_uart.2: ttyO2 at MMIO 0x49020000 (irq = 74) is a OMAP UART2
206[ 1.737548] console [ttyO2] enabled
207[ 1.742095] omap_uart.3: ttyO3 at MMIO 0x49042000 (irq = 80) is a OMAP UART3
208[ 1.764282] brd: module loaded
209[ 1.775024] loop: module loaded
210[ 1.781097] omap2-nand driver initializing
211[ 1.786163] No NAND device found.
212[ 1.789886] No NAND device found.
213[ 1.794006] OneNAND driver initializing
214[ 1.799285] usbcore: registered new interface driver cdc_ether
215[ 1.805755] usbcore: registered new interface driver rndis_host
216[ 1.812225] cdc_ncm: 04-Aug-2011
217[ 1.815765] usbcore: registered new interface driver cdc_ncm
218[ 1.822631] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
219[ 1.829925] _regulator_get: ehci-omap.0 supply hsusb0 not found, using dummy regulator
220[ 1.838623] _regulator_get: ehci-omap.0 supply hsusb1 not found, using dummy regulator
221[ 3.856292] ehci-omap ehci-omap.0: OMAP-EHCI Host Controller
222[ 3.863128] ehci-omap ehci-omap.0: new USB bus registered, assigned bus number 1
223[ 3.871307] ehci-omap ehci-omap.0: irq 77, io mem 0x48064800
224[ 3.887390] ehci-omap ehci-omap.0: USB 2.0 started, EHCI 1.00
225[ 3.893615] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
226[ 3.900939] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
227[ 3.908721] usb usb1: Product: OMAP-EHCI Host Controller
228[ 3.914459] usb usb1: Manufacturer: Linux 3.1.4-x6 ehci_hcd
229[ 3.920471] usb usb1: SerialNumber: ehci-omap.0
230[ 3.926696] hub 1-0:1.0: USB hub found
231[ 3.930694] hub 1-0:1.0: 3 ports detected
232[ 3.965728] Initializing USB Mass Storage driver...
233[ 3.971130] usbcore: registered new interface driver usb-storage
234[ 3.977661] USB Mass Storage support registered.
235[ 3.982879] usbcore: registered new interface driver libusual
236[ 3.989410] udc: OMAP UDC driver, version: 4 October 2004 (iso) (dma)
237[ 3.996643] gadget: using random self ethernet address
238[ 4.002380] gadget: using random host ethernet address
239[ 4.009338] usb0: MAC 42:8a:00:24:2c:23
240[ 4.013610] usb0: HOST MAC d6:95:95:2e:f7:09
241[ 4.018157] gadget: Ethernet Gadget, version: Memorial Day 2008
242[ 4.024688] gadget: g_ether ready
243[ 4.032562] musb-hdrc musb-hdrc: MUSB HDRC host driver
244[ 4.038818] musb-hdrc musb-hdrc: new USB bus registered, assigned bus number 2
245[ 4.046783] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
246[ 4.054138] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
247[ 4.061920] usb usb2: Product: MUSB HDRC host driver
248[ 4.067321] usb usb2: Manufacturer: Linux 3.1.4-x6 musb-hcd
249[ 4.073181] usb usb2: SerialNumber: musb-hdrc
250[ 4.078887] hub 2-0:1.0: USB hub found
251[ 4.083129] hub 2-0:1.0: 1 port detected
252[ 4.088958] mousedev: PS/2 mouse device common for all mice
253[ 4.096038] input: twl4030_pwrbutton as /devices/platform/omap/omap_i2c.1/i2c-1/1-0049/twl4030_pwrbutton/input/input0
254[ 4.108856] i2c /dev entries driver
255[ 4.114318] Linux media interface: v0.10
256[ 4.118713] lirc_dev: IR Remote Control driver registered, major 249
257[ 4.125701] Driver for 1-wire Dallas network protocol.
258[ 4.132659] OMAP Watchdog Timer Rev 0x31: initial timeout 60 sec
259[ 4.140075] twl4030_wdt twl4030_wdt: Failed to register misc device
260[ 4.146911] twl4030_wdt: probe of twl4030_wdt failed with error -16
261[ 4.154876] device-mapper: uevent: version 1.0.3
262[ 4.161163] device-mapper: ioctl: 4.21.0-ioctl (2011-07-06) initialised: dm-devel@redhat.com
263[ 4.170898] device-mapper: multipath: version 1.3.0 loaded
264[ 4.176910] device-mapper: multipath round-robin: version 1.0.0 loaded
265[ 4.185577] cpuidle: using governor ladder
266[ 4.189910] cpuidle: using governor menu
267[ 4.194305] sdhci: Secure Digital Host Controller Interface driver
268[ 4.200958] sdhci: Copyright(c) Pierre Ossman
269[ 4.206542] omap_device: omap_hsmmc.0: new worst case activate latency 0: 213623
270[ 4.216491] omap_device: omap_hsmmc.0: new worst case deactivate latency 0: 30517
271[ 4.224700] omap_hsmmc: probe of omap_hsmmc.1 failed with error -16
272[ 4.236450] usbcore: registered new interface driver snd-usb-6fire
273[ 4.245178] OMAP3 Beagle/Devkit8000 SoC init
274[ 4.316345] asoc: twl4030-hifi <-> omap-mcbsp-dai.1 mapping ok
275[ 4.324310] ALSA device list:
276[ 4.327667] #0: omap3beagle
277[ 4.331268] oprofile: using arm/armv7
278[ 4.336669] TCP cubic registered
279[ 4.342071] NET: Registered protocol family 10
280[ 4.351287] NET: Registered protocol family 17
281[ 4.356506] Registering the dns_resolver key type
282[ 4.361541] VFP support v0.3: implementor 41 architecture 3 part 30 variant c rev 3
283[ 4.369781] ThumbEE CPU extension supported.
284[ 4.374481] Registering SWP/SWPB emulation handler
285[ 4.381469] usb 1-2: new high speed USB device number 2 using ehci-omap
286[ 4.391174] sr_init: No PMIC hook to init smartreflex
287[ 4.396942] smartreflex smartreflex.0: omap_sr_probe: SmartReflex driver initialized
288[ 4.405548] smartreflex smartreflex.1: omap_sr_probe: SmartReflex driver initialized
289[ 4.414031] SmartReflex Class3 initialized
290[ 4.425018] clock: disabling unused clocks to save power
291[ 4.432525] registered taskstats version 1
292[ 4.475616] Console: switching to colour frame buffer device 160x45
293[ 4.504241] regulator_init_complete: VDAC: incomplete constraints, leaving on
294[ 4.512268] drivers/rtc/hctosys.c: unable to open rtc device (rtc0)
295[ 4.520263] Freeing init memory: 356K
296[ 4.552368] usb 1-2: New USB device found, idVendor=0424, idProduct=9514
297[ 4.559906] usb 1-2: New USB device strings: Mfr=0, Product=0, SerialNumber=0
298[ 4.575805] hub 1-2:1.0: USB hub found
299[ 4.585571] hub 1-2:1.0: 5 ports detected
300[ 4.677795] mmc0: host does not support reading read-only switch. assuming write-enable.
301[ 4.701538] mmc0: new high speed SD card at address 0002
302[ 4.731414] mmcblk0: mmc0:0002 00000 1.90 GiB
303[ 4.749145] mmcblk0: p1 p2
304[ 4.864410] udevd[69]: starting version 173
305[ 4.934570] usb 1-2.1: new high speed USB device number 3 using ehci-omap
306[ 5.099212] usb 1-2.1: New USB device found, idVendor=0424, idProduct=ec00
307[ 5.112365] usb 1-2.1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
308[ 6.823974] omap_device: omap_hsmmc.0: new worst case activate latency 0: 366210
309[ 6.852264] EXT4-fs (mmcblk0p2): INFO: recovery required on readonly filesystem
310[ 6.866210] EXT4-fs (mmcblk0p2): write access will be enabled during recovery
311[ 7.882232] EXT4-fs (mmcblk0p2): recovery complete
312[ 8.215850] EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. Opts: (null)
313[ 8.892822] init: ureadahead main process (200) terminated with status 5
314
315Ubuntu 11.10 omap ttyO2
316
317
318ubuntu@omap:~$ cat /proc/cmdline
319
320console=ttyO2,115200n8 console=tty0 mpurate=auto buddy=none buddy2=none camera=none vram=12M omapfb.mode=dvi:hd720 omapdss.def_disp=dvi root=/d
321ev/mmcblk0p2 ro rootfstype=ext4 rootwait fixrtc
322
323
324
325angstrom distro*************************************************
326
327
328
329
330U-Boot 2011.03-rc1-00000-g9a3cc57-dirty (Apr 01 2011 - 17:41:42)
331
332OMAP3630/3730-GP ES2.1, CPU-OPP2, L3-165MHz, Max CPU Clock 1 Ghz
333OMAP3 Beagle board + LPDDR/NAND
334I2C: ready
335DRAM: 512 MiB
336NAND: 0 MiB
337MMC: OMAP SD/MMC: 0
338*** Warning - readenv() failed, using default environment
339
340In: serial
341Out: serial
342Err: serial
343Beagle xM Rev C
344No EEPROM on expansion board
345Die ID #6f2e00029ff80000016830c40500e01b
346Hit any key to stop autoboot: 0
347The user button is currently NOT pressed.
348SD/MMC found on device 0
349reading uEnv.txt
350
351134 bytes read
352Loaded environment from uEnv.txt
353Importing environment from mmc ...
354Loading file "/boot/uImage" from mmc device 0:2 (xxa2)
3553203088 bytes read
356Booting from mmc ...
357## Booting kernel from Legacy Image at 80200000 ...
358 Image Name: Angstrom/2.6.32/beagleboard
359 Image Type: ARM Linux Kernel Image (uncompressed)
360 Data Size: 3203024 Bytes = 3.1 MiB
361 Load Address: 80008000
362 Entry Point: 80008000
363 Verifying Checksum ... OK
364 Loading Kernel Image ... OK
365OK
366
367Starting kernel ...
368
369Uncompressing Linux............................................................................................................................
370[ 0.000000] Linux version 2.6.32 (koen@dominion) (gcc version 4.3.3 (GCC) ) #3 PREEMPT Tue Jul 26 10:56:56 CEST 2011
371[ 0.000000] CPU: ARMv7 Processor [413fc082] revision 2 (ARMv7), cr=10c53c7f
372[ 0.000000] CPU: VIPT nonaliasing data cache, VIPT nonaliasing instruction cache
373[ 0.000000] Machine: OMAP3 Beagle Board
374[ 0.000000] Memory policy: ECC disabled, Data cache writeback
375[ 0.000000] OMAP3630/DM3730 ES1.0 (l2cache iva sgx neon isp 192mhz_clk )
376[ 0.000000] SRAM: Mapped pa 0x40200000 to va 0xfe400000 size: 0x100000
377[ 0.000000] Reserving 16777216 bytes SDRAM for VRAM
378[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 130048
379 omapdss.def_disp=dvi root=/dev/mmcblk0p2 rw rootfstype=ext3 rootwaitn8
380[ 0.000000] Beagle expansionboard: none
381[ 0.000000] Beagle cameraboard: lbcm3m1
382[ 0.000000] PID hash table entries: 2048 (order: 1, 8192 bytes)
383[ 0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
384[ 0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
385[ 0.000000] Memory: 256MB 256MB = 512MB total
386[ 0.000000] Memory: 496256KB available (5900K code, 673K data, 204K init, 0K highmem)
387[ 0.000000] Hierarchical RCU implementation.
388[ 0.000000] NR_IRQS:402
389[ 0.000000] Clocking rate (Crystal/Core/MPU): 26.0/332/600 MHz
390[ 0.000000] Reprogramming SDRC clock to 332000000 Hz
391[ 0.000000] GPMC revision 5.0
392[ 0.000000] IRQ: Found an INTC at 0xfa200000 (revision 4.0) with 96 interrupts
393[ 0.000000] Total of 96 interrupts on 1 active controller
394[ 0.000000] OMAP GPIO hardware version 2.5
395[ 0.000000] OMAP clockevent source: GPTIMER12 at 32768 Hz
396[ 0.000000] Console: colour dummy device 80x30
397[ 0.000000] console [tty0] enabled
398[ 0.000000] Calibrating delay loop... 511.52 BogoMIPS (lpj=1998848)
399[ 0.000000] Mount-cache hash table entries: 512
400[ 0.000000] CPU: Testing write buffer coherency: ok
401[ 0.000000] tmpfs: No value for mount option 'mode'
402[ 0.000000] devtmpfs: initialized
403[ 0.000000] regulator: core version 0.5
404[ 0.000000] NET: Registered protocol family 16
405[ 0.000000] OMAP3 Beagle Rev: xM C
406[ 0.000000] Beagle cameraboard: registering i2c2 bus for lbcm3m1
407[ 0.000000] Found NAND on CS0
408[ 0.000000] Registering NAND on CS0
409[ 0.000000] Unable to get DVI reset GPIO
410[ 0.000000] omap_init_mbox: platform not supported
411[ 0.000000] Target VDD1 OPP = 4, VDD2 OPP = 2
412[ 8.720520] OMAP DMA hardware revision 5.0
413[ 8.726867] bio: create slab <bio-0> at 0
414[ 8.728149] SCSI subsystem initialized
415[ 8.729492] usbcore: registered new interface driver usbfs
416[ 8.729705] usbcore: registered new interface driver hub
417[ 8.729888] usbcore: registered new device driver usb
418[ 8.730285] i2c_omap i2c_omap.1: bus 1 rev4.0 at 2600 kHz
419[ 8.733001] twl4030: PIH (irq 7) chaining IRQs 368..375
420[ 8.733062] twl4030: power (irq 373) chaining IRQs 376..383
421[ 8.733367] twl4030: gpio (irq 368) chaining IRQs 384..401
422[ 8.735107] regulator: VUSB1V5: 1500 mV normal standby
423[ 8.735351] regulator: VUSB1V8: 1800 mV normal standby
424[ 8.735595] regulator: VUSB3V1: 3100 mV normal standby
425[ 8.736907] twl4030_usb twl4030_usb: Initialized TWL4030 USB module
426[ 8.737335] regulator: VMMC1: 1850 <--> 3150 mV normal standby
427[ 8.737640] regulator: VDAC: 1800 mV normal standby
428[ 8.737854] regulator: VPLL2: 1800 mV normal standby
429[ 8.738128] regulator: VSIM: 1800 <--> 3000 mV normal standby
430[ 8.738494] regulator: VAUX3: 1800 mV normal standby
431[ 8.738861] regulator: VAUX4: 1800 mV normal standby
432[ 8.739074] i2c_omap i2c_omap.2: bus 2 rev4.0 at 400 kHz
433[ 8.749572] i2c_omap i2c_omap.3: bus 3 rev4.0 at 100 kHz
434[ 8.750793] Switching to clocksource 32k_counter
435[ 8.759918] musb_hdrc: version 6.0, musb-dma, otg (peripheral+host), debug=0
436[ 8.763702] musb_hdrc: USB OTG mode controller at fa0ab000 using DMA, IRQ 92
437[ 8.763763] musb_hdrc musb_hdrc: MUSB HDRC host driver
438[ 8.763916] musb_hdrc musb_hdrc: new USB bus registered, assigned bus number 1
439[ 8.764068] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
440[ 8.764099] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
441[ 8.764160] usb usb1: Product: MUSB HDRC host driver
442[ 8.764190] usb usb1: Manufacturer: Linux 2.6.32 musb-hcd
443[ 8.764221] usb usb1: SerialNumber: musb_hdrc
444[ 8.764862] hub 1-0:1.0: USB hub found
445[ 8.764892] hub 1-0:1.0: 1 port detected
446[ 8.765960] NET: Registered protocol family 2
447[ 8.766235] IP route cache hash table entries: 4096 (order: 2, 16384 bytes)
448[ 8.766876] TCP established hash table entries: 16384 (order: 5, 131072 bytes)
449[ 8.767303] TCP bind hash table entries: 16384 (order: 4, 65536 bytes)
450[ 8.767517] TCP: Hash tables configured (established 16384 bind 16384)
451[ 8.767547] TCP reno registered
452[ 8.767578] UDP hash table entries: 256 (order: 0, 4096 bytes)
453[ 8.767639] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)
454[ 8.767913] NET: Registered protocol family 1
455[ 8.768341] RPC: Registered udp transport module.
456[ 8.768371] RPC: Registered tcp transport module.
457[ 8.768402] RPC: Registered tcp NFSv4.1 backchannel transport module.
458[ 8.769287] omap-iommu omap-iommu.0: isp registered
459[ 8.771026] VFS: Disk quotas dquot_6.5.2
460[ 8.771148] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
461[ 8.772247] squashfs: version 4.0 (2009/01/31) Phillip Lougher
462[ 8.773071] JFFS2 version 2.2. (NAND) (SUMMARY) �© 2001-2006 Red Hat, Inc.
463[ 8.773925] msgmni has been set to 969
464[ 8.777679] alg: No test for stdrng (krng)
465[ 8.778015] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 254)
466[ 8.778045] io scheduler noop registered
467[ 8.778076] io scheduler deadline registered
468[ 8.778259] io scheduler cfq registered (default)
469[ 8.837005] OMAP DSS rev 2.0
470[ 8.837066] OMAP DISPC rev 3.0
471[ 8.837158] OMAP VENC rev 2
472[ 8.837402] OMAP DSI rev 1.0
473[ 9.173980] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
474[ 9.192291] serial8250.0: ttyS0 at MMIO 0x4806a000 (irq = 72) is a ST16654
475[ 9.209960] serial8250.1: ttyS1 at MMIO 0x4806c000 (irq = 73) is a ST16654
476[ 9.227630] serial8250.2: ttyS2 at MMIO 0x49020000 (irq = 74) is a ST16654
477[ 9.808258] console [ttyS2] enabled
478[ 9.818450] brd: module loaded
479[ 9.824798] loop: module loaded
480[ 9.829528] omap2-nand driver initializing
481[ 9.833923] No NAND device found!!!
482[ 9.837646] No NAND device found!!!
483[ 9.842163] usbcore: registered new interface driver catc
484[ 9.847686] catc: v2.8:CATC EL1210A NetMate USB Ethernet driver
485[ 9.853790] usbcore: registered new interface driver kaweth
486[ 9.859405] pegasus: v0.6.14 (2006/09/27), Pegasus/Pegasus II USB Ethernet driver
487[ 9.867095] usbcore: registered new interface driver pegasus
488[ 9.872833] rtl8150: v0.6.2 (2004/08/27):rtl8150 based usb-ethernet driver
489[ 9.879852] usbcore: registered new interface driver rtl8150
490[ 9.885681] usbcore: registered new interface driver asix
491[ 9.891204] usbcore: registered new interface driver cdc_ether
492[ 9.897186] usbcore: registered new interface driver dm9601
493[ 9.902954] usbcore: registered new interface driver smsc95xx
494[ 9.908874] usbcore: registered new interface driver gl620a
495[ 9.914581] usbcore: registered new interface driver net1080
496[ 9.920379] usbcore: registered new interface driver plusb
497[ 9.926025] usbcore: registered new interface driver rndis_host
498[ 9.932098] usbcore: registered new interface driver cdc_subset
499[ 9.938171] usbcore: registered new interface driver zaurus
500[ 9.943908] usbcore: registered new interface driver MOSCHIP usb-ethernet driver
501[ 9.951995] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
502[ 9.958862] ehci-omap ehci-omap.0: OMAP-EHCI Host Controller
503[ 9.964904] ehci-omap ehci-omap.0: new USB bus registered, assigned bus number 2
504[ 9.972534] ehci-omap ehci-omap.0: irq 77, io mem 0x48064800
505[ 9.993164] ehci-omap ehci-omap.0: USB 2.0 started, EHCI 1.00
506[ 9.999084] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
507[ 10.005981] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
508[ 10.013305] usb usb2: Product: OMAP-EHCI Host Controller
509[ 10.018707] usb usb2: Manufacturer: Linux 2.6.32 ehci_hcd
510[ 10.024169] usb usb2: SerialNumber: ehci-omap.0
511[ 10.029418] hub 2-0:1.0: USB hub found
512[ 10.033294] hub 2-0:1.0: 3 ports detected
513[ 10.063568] Initializing USB Mass Storage driver...
514[ 10.068695] usbcore: registered new interface driver usb-storage
515[ 10.074798] USB Mass Storage support registered.
516[ 10.079833] mice: PS/2 mouse device common for all mice
517[ 10.085479] input: gpio-keys as /devices/platform/gpio-keys/input/input0
518[ 10.093322] input: twl4030_pwrbutton as /devices/platform/i2c_omap.1/i2c-1/1-0049/twl4030_pwrbutton/input/input1
519[ 10.104095] i2c /dev entries driver
520[ 10.108215] Linux video capture interface: v2.00
521[ 10.113189] omap-iommu omap-iommu.0: isp: version 1.1
522[ 10.119903] vpfe_init
523[ 10.122772] OMAP Watchdog Timer Rev 0x31: initial timeout 60 sec
524[ 10.129577] cpuidle: using governor ladder
525[ 10.133789] cpuidle: using governor menu
526[ 10.243438] mmci-omap-hs mmci-omap-hs.1: err -16 configuring card detect
527[ 10.250488] Registered led device: beagleboard::usr0
528[ 10.255676] Registered led device: beagleboard::usr1
529[ 10.262390] Registered led device: beagleboard::pmu_stat
530[ 10.269500] usbcore: registered new interface driver usbhid
531[ 10.275177] usbhid: USB HID core driver
532[ 10.279235] Advanced Linux Sound Architecture Driver Version 1.0.21.
533[ 10.286163] usbcore: registered new interface driver snd-usb-audio
534[ 10.361846] usb 2-2: new high speed USB device using ehci-omap and address 2
535[ 10.369689] No device for DAI omap-mcbsp-dai-0
536[ 10.374206] No device for DAI omap-mcbsp-dai-1
537[ 10.378723] No device for DAI omap-mcbsp-dai-2
538[ 10.383209] No device for DAI omap-mcbsp-dai-3
539[ 10.387725] No device for DAI omap-mcbsp-dai-4
540[ 10.392272] OMAP3 Beagle SoC init
541[ 10.396423] asoc: twl4030 <-> omap-mcbsp-dai-0 mapping ok
542[ 10.407958] ALSA device list:
543[ 10.410980] #0: omap3beagle (twl4030)
544[ 10.414947] oprofile: using arm/armv7
545[ 10.418914] TCP cubic registered
546[ 10.422180] NET: Registered protocol family 17
547[ 10.426757] NET: Registered protocol family 15
548[ 10.431365] lib80211: common routines for IEEE802.11 drivers
549[ 10.437103] ThumbEE CPU extension supported.
550[ 10.441467] Power Management for TI OMAP3.
551[ 10.447448] Unable to set L3 frequency (400000000)
552[ 10.452362] Switched to new clocking rate (Crystal/Core/MPU): 26.0/332/1000 MHz
553[ 10.459747] IVA2 clocking rate: 800 MHz
554[ 10.641571] SmartReflex driver initialized
555[ 10.645812] omap3beaglelmb: Driver registration complete
556[ 10.656585] VFP support v0.3: implementor 41 architecture 3 part 30 variant c rev 3
557[ 10.664855] registered taskstats version 1
558[ 10.704437] usb 2-2: New USB device found, idVendor=0424, idProduct=9514
559[ 10.711242] usb 2-2: New USB device strings: Mfr=0, Product=0, SerialNumber=0
560[ 10.720428] hub 2-2:1.0: USB hub found
561[ 10.724517] hub 2-2:1.0: 5 ports detected
562[ 10.801605] Console: switching to colour frame buffer device 160x45
563[ 10.823669] regulator_init_complete: incomplete constraints, leaving VAUX4 on
564[ 10.831268] regulator_init_complete: incomplete constraints, leaving VAUX3 on
565[ 10.839233] regulator_init_complete: incomplete constraints, leaving VDAC on
566[ 10.847412] omap_vout omap_vout: probed for an unknown device
567[ 10.853759] Waiting for root device /dev/mmcblk0p2...
568[ 10.863159] mmc0: host does not support reading read-only switch. assuming write-enable.
569[ 10.871551] mmc0: new high speed SDHC card at address c5df
570[ 10.877563] mmcblk0: mmc0:c5df SD04G 3.69 GiB
571[ 10.882354] mmcblk0: p1 p2
572[ 11.032562] usb 2-2.1: new high speed USB device using ehci-omap and address 3
573[ 11.158020] usb 2-2.1: New USB device found, idVendor=0424, idProduct=ec00
574[ 11.168640] usb 2-2.1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
575[ 11.182586] smsc95xx v1.0.4
576[ 11.250396] usb0: register 'smsc95xx' at usb-ehci-omap.0-2.1, smsc95xx USB 2.0 Ethernet, 5a:59:b8:6f:3f:13
577[ 13.743255] EXT3-fs (mmcblk0p2): warning: maximal mount count reached, running e2fsck is recommended
578[ 13.756713] kjournald starting. Commit interval 5 seconds
579[ 14.010986] EXT3-fs (mmcblk0p2): using internal journal
580[ 14.020446] EXT3-fs (mmcblk0p2): recovery complete
581[ 14.033294] EXT3-fs (mmcblk0p2): mounted filesystem with writeback data mode
582[ 14.044769] VFS: Mounted root (ext3 filesystem) on device 179:2.
583[ 14.057281] devtmpfs: mounted
584[ 14.064544] Freeing init memory: 204K
585INIT: version 2.86 booting
586Please wait: booting...
587Starting udev
588[ 14.736267] udev: starting version 151
589Remounting root file system...
590Caching udev devnodes
591Populating dev cache
592[ 21.074645] Bluetooth: Core ver 2.15
593[ 21.084289] NET: Registered protocol family 31
594[ 21.093902] Bluetooth: HCI device and connection manager initialized
595[ 21.104888] Bluetooth: HCI socket layer initialized
596[ 21.136047] Bluetooth: L2CAP ver 2.14
597[ 21.144927] Bluetooth: L2CAP socket layer initialized
598[ 21.176483] Bluetooth: HIDP (Human Interface Emulation) ver 1.2
599[ 21.366424] NET: Registered protocol family 10
600[ 21.405517] Bluetooth: RFCOMM TTY layer initialized
601[ 21.414916] Bluetooth: RFCOMM socket layer initialized
602[ 21.424255] Bluetooth: RFCOMM ver 1.11
603ALSA: Restoring mixer settings...
604Configuring network interfaces... ifconfig: SIOCGIFFLAGS: No such device
605ifconfig: SIOCGIFFLAGS: No such device
606eth0 No such device
607
608ifconfig: SIOCGIFFLAGS: No such device
609usb0 no wireless extensions.
610
611udhcpc (v1.13.2) started
612run-parts: /etc/udhcpc.d/00avahi-autoipd exited with code 1
613Sending discover...
614Sending discover...
615Sending discover...
616No lease, forking to background
617done.
618Starting portmap daemon: portmap.
619net.ipv4.conf.default.rp_filter = 1
620net.ipv4.conf.all.rp_filter = 1
621hwclock: can't open '/dev/misc/rtc': No such file or directory
622Tue Dec 13 23:17:00 GMT 2011
623hwclock: can't open '/dev/misc/rtc': No such file or directory
624INIT: Entering runlevel: 5
625Starting system message bus: dbus.
626Starting Hardware abstraction layer hald
627Configuring leds:
628 beagleboard::pmu_stat: none
629 beagleboard::usr0: heartbeat
630 beagleboard::usr1: mmc0
631Starting Dropbear SSH server: dropbear.
632Starting advanced power management daemon: No APM support in kernel
633(failed.)
634Starting Vixie-cron.
635Starting Samba: smbd nmbd.
636Starting syslogd/klogd: done
637Starting internet superserver: xinetd.
638 * Starting Avahi mDNS/DNS-SD Daemon: avahi-daemon
639 ...done.
640Starting Network connection manager daemon: NetworkManager.
641User button not pressed, not flashing NAND
642Starting GNOME Display Manager gdm
643
644.-------.
645| | .-.
646| | |-----.-----.-----.| | .----..-----.-----.
647| | | __ | ---'| '--.| .-'| | |
648| | | | | |--- || --'| | | ' | | | |
649'---'---'--'--'--. |-----''----''--' '-----'-'-'-'
650 -' |
651 '---'
652
653The Angstrom Distribution beagleboard ttyS2
654
655Angstrom 2010.7-test-20110220 beagleboard ttyS2
656
657beagleboard login: