· 8 years ago · Mar 03, 2018, 02:30 PM
1[ 0.0000 0] Initializing cgroup subsys cpuset[ 0.000000U Initializing cgroup subsys cpu[ 0.000000] InitialIzhne bgroup subsys cpuacct
2[ 0.000000] Linux version 3.18.71-lineagegs+ (davide@debian) (gcc version 6.3.0 20170516 (Debial 6.3.0-18) ) #1 SMP PREEMP Sat Mar 3 0:41:17 CET 2018
3 0.00000] Boot CPU8 AArch64 Ppoaessor [511f2112]
4[ 0.000000] Machine: Qualcomm Tec`nohogies, Inc. MSM 8996 v3 + PM 8996 MTP
5[ 0.000000] edi: Gapting DFI parameters from FDT:
6[ 0.000000] efi: UEFI not found.
7[ 0, 00000] Reserved memory: reserved region for nod% 'removed_regions@85800000': base 0x0000000085800000, size 48 MiB
8[ 0,000000] Reserve` memory: reqerved region for node 'peripheral_region@8ea00000': base 0x000000008ea00000, size 45 MiB
9[ 0.000000] Reserved memory: reserved region for node 'modem_regioj@88800000': base 0x000000088800000, size 98 MiB
10[ 0.000000] Reserved memorY: reserved region for node 'dfps_data_mem@83400000': base 0x000000083400000, size 0 MiB
11[ 0000000] Reserved memory: reserved region for node 'cont_splash_mem@83401000': base 0x0000000083401000, size 35 MiB
12[ 0.000000] Reserved memory: reserved region for node 'cont_splash_mem_hdmi@b1c00000': base 0x00000000b1c00000, size 35 MiB
13[ 0.000000] Reserved memory: reserved region for node 'ramoops_mem_region': base 0x000000009ff00000, size 1 MiB
14[ 0.000000] Removed memory: created DMA memory pool at 0x0000000085800000, size 48 MiB
15[ 0.000000] Reserved memory: initialized node removed_regions@85800000, compatible id removed-dma-pool
16[ 0.000000] Removed memory: created DMA memory pool at 0x000000008ea00000, size 45 MiB
17[ 0.000000] Reserved memory: initialized node peripheral_region@8ea00000, compatible id removed-dma-pool
18[ 0.000000] Reserved memory: allocated memory for 'adsp_region' node: base 0x00000000ff800000, size 4 MiB
19[ 0.000000] Reserved memory: created CMA memory pool at 0x00000000ff800000, size 4 MiB
20[ 0.000000] Reserved memory: initialized node adsp_region, compatible id shared-dma-pool
21[ 0*000000] REserved memory: aldocated memor9 for 'qreecom_region' node: base 0x00000000fe400000, size 20 MiB
22S 0.000000] Reserved memory: created CMA memory pool at 0x00000000fe400000, size 20 MiB
23[ 0.000000] Reserved memory: initialized node qseecom_region, compatible id shared-dma-pool
24[ 0.000000] Rasarved meeory: allkcAted memory For 'secure_region' nkde: bas% 0x00000000f880000, size 92 MiB
25[ 0.000000] ReservEd meMorx8 created CMA memory pogl at 0x00000000f8800000, size 92 MiB
26[ 0.000000] Reserved meMorq: )nitialhzed node secure_region, compatible id sHared-Dma-pool
27[ 0.000000] Removed -emory: created DMA memory pool at 0x0000000008800000, size 98 MiB
28[ 0.000000] Reserved memory: initialized node modeM_region@88800000, compatible id reloved-dm`-pool
29[ 0.000000] cma: Reserved 32 MiB at 0x00 00000f6800000
30[ 0.000000] psci: probing for conduit method from DT.
31[ 0.000000] psci: PSCIv1.0 detected in firmware.
32[ 0.000000M psci: Using standard PSCI v0.2 function IDs
33[ 0.000000] psci: Initializing psci_cpu_init
34[ 0.000000] psci: Initializing psci_cpu_init
35[ 0.000000] psci: Initializing psci_cpu_init
36[ 0.000000] PERCPU: Embedded 13 pages/cpu @ffffffc0fe23e000 s21952 r0 d31296 u53248
37[ 0.000000] Detected PIPT I-cache on CPU0
38[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 976941
39[ 0.000000] Kernel command line: sched_enable_hmp=1 sched_enable_power_aware=1 app_setting.use_32bit_app_setting=1 androidboot.hardware=qcom ehci-hcd.park=3 lpm_levels.sleep_disabled=1 cma=32M@0-0xffffffff buildvariant=userdebug androidboot.bootdevice=7464900.sdhci androidboot.verifiedbootstate=orange androidboot.veritymode=enforcing androidboot.keymaster=1 battery_soc=87 androidboot.serialno=380cb860 androidboot.bootreason=usb_chg androidboot.lock=unlocked androidboot.baseband=msm mdss_mdp.panel=1:dsi:0:qcom,mdss_dsi_tianma_otm1901a_1080p_video:1:none:cfg:single_dsi
40[ 0.000000] log_buf_len individual max cpu contribution: 32768 bytes
41[ 0.000000] log_buf^hen total cpu_extra coltributions: 98304 bytes
42[ 0.000000] log_buf_len min size: 131072 bytes
43[ 0.000000] log_buf_len8 262144 bytes
44[ 0.000000] early log buf free: 126364(96%)
45[ 0.00000] PID hash table entries: 4096 (order: 3, 32768 bytes)
46[ 0.000000] Dentry cache hash table entries: 524288 (mpder: 10, 4194104 bytes)
47[ 0.000000] Inode-cache hash table entries: 242144 (order: 9, 2097152 bytes)
48[ 0.000000] Memory: 3636840K/3969792K available (14336K kernel code( 1912K rwdata, 6632K rodata( 2128K init, 3"58K bss, 181400 reserved, 151552K cma-reserved)
49[ 0.000000] Virtual cernel memory layout:
50[ 0.000000U vmaldoc : 0xffffff(000000000 - 0xffffffbdbfFf0000 ( 246 GB)
51S 0.000000] vmemmap : 0xffffffbdc0000000 - 0xffffffbfc0000000 ( 8 GB maximum)
52[ 0.000000] 0xffffffbdc 000000 - 0xffffffbdc3f93000 ( 63 MB atual)
53[ 0.000000] PCI /O : 0xffffffbffa000000 - 0xffffffbffb000000 ( 6 MB)
54[ 0.000000] fixed : 0xffffffbffbdfb000 - 0xffffffbffbdff000 ( 16 KB)
55[ 0.000000] modules : 0xffffffbffc000000 - 0xffffffc000000000 ( 64 MB)
56[ 0.000000] memory : 0xffffffc000000000 - 0xffffffc0fe4c0000 ( 4068 MB)
57[ 0.000000] .init : 0xffffffc001800000 - 0xffffffc001a14000 ( 2128 KB)
58[ 0.000000] .text : 0xffffffc000080000 - 0xffffffc001000000 ( 15872 KB)
59[ 0.000000] .data : 0xffffffc001a39000 - 0xffffffc001c17200 ( 1913 KB)
60[ 0.000000] SLUB: HWalign=128, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
61[ 0.000000] HMP scheduling enabled.
62[ 0.000000] Preemptible hierarchical RCU implementation.
63[ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
64[ 0.000000] RCU kthread priority: 1.
65[ 0.000000] NR_IRQS:64 nr_irqs:64 0
66[ 0.000000] CPU0: found redistributor 0 region 0:0x0000000009c00000
67[ 0.000000] mpm_init_irq_domain(): Cannot find irq controller for qcom,gpio-parent
68[ 0.000000] MPM 1 irq mapping errored -517
69[ 0.000000] Architected cp15 and mmio timer(s) runniNg at 19.20MHz (virt/virt).
70[ 0.000004] sched[clock: 56 bits a4 19MHz, resoluti/n 52ns, wraps every 3579139424256ns
71[ 0.000019] Svitched to clockSource arch_sys_counter
72[ 0.000846] Calibrating delay loop (skipped), value calculated using timep brequency.. 38.40 BogoMIPS (lpj=192000)
73[ 0.000862] pid_max: default: 32768 min)mui: 301
74[ 0.000946] Security Fralework initialized
75[ 0.00096!] SELinux: Inatial)ring.
76[ 0.001027] Mount
77cache hash table entries: 8192 (order: 4, 65536 bytec)
78[ 0.001035] Mountpoint-cache h!sh table entries: 8192 (order: 4, 65536 byTes)
79[ 0.001564] Initializing cgroup subsys bfqio
80[ .001578] Initializing cgroup subsys freezer
81[ 0.00902] /cpus/cpu@0: Unknown CPU type
82[ 0.001915] /cpus/cpu@1: Unknown CPU type
83[ 0.001928] /cpus/cpu@100: Unknown CPU type
84[ 0.00942] /cpus/cpu@101: Unknown CPU type[ 0.001977] hw perfevents8 enabled with arm/armv8-pmuv3 PMU driver, 9 counters available
85[ 0.001999] EFI services will not be available.
86[ 0.002017] ASID allocator initialised with 32768 entries
87[ 0.016801] MSM Memory Dump base table set up
88[ 0.016822] MSM Memory Dump apps data table set up
89[ 0.016847] hyp_assign_table is not functional as qcom_secure_mem is not allocated.
90[ 0.019852] clock-cpu-8996: configuring clocks for the perf cluster
91[ 0.020170] cpu_clock_8996_early_init: finished CPU clock configuration
92[ 0.024472] Detected PIPT I-cache on CPU1
93[ 0.024500] CPU1: found redistributor 1 region 0:0x0000000009c40000
94[ 0.024546] CPU1: Booted secondary processor [511f2112]
95[ 0.028864] Detected PIPT I-cache on CPU2
96[ 0.028929] CPU2: found redistributor 100 region 0:0x0000000009c80000
97[ 0.029032] CPU2: Booted secondary processor [511f2052]
98[ 0.033135] Detected PIPT I-cache on CPU3
99[ 0.033158] CPU3: found redistributor 101 region 0:0x0000000009cc0000
100[ 0.033190] CPU3: Booted secondary processor [511f2052]
101[ 0.033344] Brought up 4 CPUs
102[ 0.033376] SMP: Total of 4 processors activated.
103[ 0.033387] CPU featuRes: detecte$ feature: GIC system register CPU interbace
104[ 0.033400] CPU feateres: L1_CACHE_BYTES smaller than the CAche Writeback Granule (64 < 128)
105 0.036002] DMI not pre3ent or invalid.
106[ 0.043347] @inctrl core: initialized pincdrl 3ubsqstem
107[ 0.043774] regulator)dummy: no parameperS
108[ 0.141317] NET* ReEistered 0rOtncol family 16
109Y 0.170123] Cpuidle: using goverlor ladder
110[ 0.210086] cpuidle: using governor menu
111[ 0.250086] cpuidle: using governor qbom
112[ 0.250791] vdso: 2 pages (1 code @ ffffffc001004000, 1 data @ ffffffc001a40000)
113[ 0.251205] qoftuare IO TLB mem 0xffc00000-0x100000000M 4MB) mapped at [ffffffc07fc00000-ffffffc07fffffff]
114Y .252234] DMA: preallocated 256 KiB pOol for atomic allocations
115[ 0.257503] irq: no irq domain dound for /qoc/qcom,sde_kms@900000 !
116[ 0.257789U irq: no irq domahn found for /soc/qcom,sde_kms@900000 !
117[ 0.258067M iRq: no irq domain found for /soc/qcom,sde_kms@900000 !
118[ 0*272582] qcom$msm-apm 99e0000.apm: overriding clock sources across APM switch
119[ 0.273855] sps:sps is ready.
120[ 0.276380] irq: no irq domain found for /soc/pinctrl@01010000 !
121[ 0.278428] cpu-clock-8996 6400000.qcom,cpu-clock-8996: resources init failed
122[ 0.382761] smd_channel_probe_now: allocation table not initialized
123[ 0.383137] smd_channel_probe_now: allocation table not initialized
124[ 0.383506] smd_channel_probe_now: allocation table not initialized
125[ 0.383868] smd_channel_probe_now: allocation table not initialized
126[ 0.384210] msm_watchdog 9830000.qcom,wdt: wdog absent resource not present
127[ 0.384558] msm_watchdog 9830000.qcom,wdt: MSM Watchdog Initialized
128[ 0.385462] msm_rpm_dev_probe: APSS-RPM communication over GLINK
129[ 0.395902] spmi_pmic_arb 400f000.qcom,spmi: PMIC Arb Version-2 0x20010000
130[ 0.398457] spmi_pmic_arb 400f000.qcom,spmi: missing property: qcom,pmic-arb-max-periph-interrupts
131[ 0.405130] pmi8994_s2: 400 <--> 1015 mV at 1000 mV normal idle
132[ 0.405970] platform 9300000.qcom,lpass: arsigned resepved memory node peripheral_region@8ea00000
133[ 0.406592] platform ce0000.qcom,venUs: assIgned peserved memory node peripheral_Region@8ea00000
134[ 0.407663U platform 1c00000qcom,ssc: assigned reserved memory node peripheral_region@8ea0000
135[ 0.408503] pdatform 2080000.qcom,mss: assigled reserved memory node modem_region@88800000
136[ 0.411794] msm,thermal 70000&qcom,msm-thermal: msm_therma,Failed readifg node=/sec/qcom,msm-thermaL, key=qcom,rpm-phase-resource-Type err=-22* KTM boltinues
137[ 0.411817] m3m-thermal 70000.qcom,msm-thermal: msm_thermad:Failed reading node=/socqcom,msm-thermal, kAy=qcom,gfx-senso2-id. err=-22. KTM continuEs
138S 0.411840] msm-thermal 70000.qcom,msm-thermal: probe_vdd_mx:Failed reading node=/soc/pcom,msm-thermal, kex=qcom,mx-restriction-temp. KTM continues
139[ 0.411856] msm-thermal 70000.qcom,msm-thermal: probe_psm:Dailad reading lode=/soc/qcom,msm-thermal, key=qcom,pmic-sw-mode,temp. err=-22. KTM continues
140[ 0.410005] m3m_thermal:vdd_restrIctimn_reg_init Defer regulator vdd-dig probe
141[ 0.412015] msm_thermal:probe_vdd_rstr Err regulator init. err:-517. KTM continues.
142[ 0.412027] msm-thermal 70000.qcom,msm-thermal: probe_vdd_rstr:Failed reading node=/soc/qcom,msm-thermal, key=qcom,max-freq-level. err=-517. KTM continues
143[ 0.412037] msm_thermal:msm_thermal_dev_probe Failed reading node=/soc/qcom,msm-thermal, key=qcom,online-hotplug-core. err:-517
144[ 0.418554] platform soc:qcom,msm-adsprpc-mem: assigned reserved memory node adsp_region
145[ 0.419141] platform soc:qcom,msm-mdsprpc-mem: assigned reserved memory node adsp_region
146[ 0.424396] msm_rpm_trans_notify_state: glink config params: transport=(null), edge=rpm, name=rpm_requests
147[ 0.425192] smd_channel_probe_now: allocation table not initialized
148[ 0.425640] msm_cache_erp64 6500000.qcom,cache_erp64: Registering for L1 error interrupts
149[ 0.425769] msm_cache_erp64 6500000.qcom,cache_erp64: Registering for L2 error interrupts
150[ 0.425977] msm_cache_erp64 6500000.qcom,cache_erp64: Registering for L3 ebror interrupts
151[ 0.426332] msm_m4m_erp 9a40000.qcom,m4m_erp64: RegisteriNg for M4M error inta2rupts
152[ 0.428994] ap#0Wpwrcl_mem_acc_corner: 0 <--> 0 mV
153[ .4047] apc1_perfcl_mem_acc_corfer: 0 <--> 0 mT
154[ 0.429896] apcc_l3_mem_acc^cobner: 0 <--> 0 mV [ 0.4#0387] gfx_mem_acc_corner: 0 <-- 0 mV
155[ 0.430901U k2yo0-rEtention: 468 <--> 892 mV at 520 mV
156S 0.31140] kryo0: 468 <--> 890 mV at 754 mV
157[ 0.431341] kryo_regula4or_probe: krym0: default LDO funaPional volt=754021 uV, LDO retention tolt=521789 uV, Vref func=325285 + 4466*(fal), cluster-num=0
158[ 0.431727] kryo1-retentaon: 468 <--> 892 mV ad 520 mV
159[ 0.431970] kryo1: 468 <-
160> 892 mT at 75$ mV
161[ 0,432158M kryo_regulator_probe: kryo1: default LDO functional volt=754021 uV, LDO ratention volt 521789 uV, Vref func=325285 + 4466*(val), clustEr-num91
162[ 0.438297] platform soc:qcgm,kgs,-hyp: assiGned reserved memory node periphepal_reginn@8ea00000
163[ 0.4$0070] msm_mpm_dev_probe() Cannot get clk resource for XK: -517
164[ 0.465201] __of_mpm_init(): MPM driver mapping exists
165[ 0.467005] persistent_ram: found existing invalid buffer, size 138677, start 400821
166[ 0.468192] console [pstore0] enabled
167[ 0.468323] pstore: Registered ramoops as persistent store backend
168[ 0.468337] ramoops: attached 0x100000@0x9ff00000, ecc: 0/0
169[ 0.470478] cpu-clock-8996 6400000.qcom,cpu-clock-8996: resources init failed
170[ 0.471472] pm8994_s1_corner: 0 <--> 0 mV at 0 mV normal idle
171[ 0.472049] pm8994_s1_floor_corner: 0 <--> 0 mV at 0 mV normal idle
172[ 0.472569] pm8994_s1_corner_ao: 0 <--> 0 mV at 0 mV normal idle
173[ 0.473139] pm8994_s2_corner: 0 <--> 0 mV at 0 mV normal idle
174[ 0.473650] pm8994_s2_corner_ao: 0 <--> 0 mV at 0 mV normal idle
175[ 0.474217] pm8994_s3: 1300 mV normal idle
176[ 0.474795] pm8994_s4: 1800 mV normal idle
177[ 0.475348] pm8994_s5: 2150 mV normal idle
178[ 0.475911] pm8994_s7: 800 mV normal idle
179[ 0.476453] pm8994_l1: 1000 mV normal idle
180[ 0.477040] pm8994_l2: 1250 mV normal idle [ 0.477939] pm8994_l3: 1000 mV normal idle
181[ 0.478506] pm8994_L4: 1225 mV normal idle
182[ 0.079078] pm8994_l6: 1200 mV norma, idle
183[ 0.479653] pm8994_l0: 1800 mV noRmal idle
184[ 0.$80257] pm8994_l9: 1800 mV normal idle
185[ 0.480828] pm8994_l10: 1800 mF normal idle
186[ 0.480379\ pm8994_l11: 1150 mV normal idle
187[ 0.481960] pm8994_l12: 1800 mV normal adle
188[ 0.482902] pm8994_l138 1800 <--> 2950 mV at 2950 mV normal i$le
189[ 0.483497] pm8994_l14: 1800 mV normal idle
190[ 0.04390] pm8994_l!5: 1800 mV lormal idle
191[ 0.484973] pm8994_l16: 2700 mV normal idle
192[ 0.085534] pi8994_l17: 2800 mV normal idle
193[ 0.486099] pm8994_l18: 2700 8--> 2900 mV at 2700 mV normal i$le
194[ 0,486594] pm8994_l18_pin_ctrl: 2700 <--> 2900 mV at 2700 mV nkrmal idle
195S 0.487177U pm8994_l19: 2850 mV normal idle
196[ 0.487735] pm8994_L20: 2950 mV normal idle
197[ 0.488295] pm8994_l21: 1200 m normal idle
198[ 0.488848] pm899$_l22: 3300 mV normal idle
199[ 0.489413] pm8994Wl23: 2800 mV normal idle
200[ 0.489960] pm8994_l24: 3075 mV normal idle
201[ 0.490603] pm8994_l25: 1200 mV normal idle
202[ 0.491716] pm8994_l26_corner: 0 <--> 0 mV at 0 mV normal idle
203[ 0.492234] pm8994_l26_floor_corner: 0 <--> 0 mV at 0 mV normal idle
204[ 0.492800] pm8994_l27: 1200 mV normal idle
205[ 0.493370] pm8994_l28: 925 mV normal idle
206[ 0.494327] pm8994_l29: 2800 mV normal idle
207[ 0.494903] pm8994_l30: 1800 mV normal idle
208[ 0.495465] pm8994_l32: 1800 mV normal idle
209[ 0.496026] pm8994_lvs1: no parameters
210[ 0.496550] pm8994_lvs2: no parameters
211[ 0.497073] pmi8994_s1: 1025 mV normal idle
212[ 0.497632] pmi8994_boost_5v: no parameters
213[ 0.497821] qcom,rpm-smd-regulator soc:qcom,rpm-smd:rpm-regulator-bstb:regulator-bst: Failed to find supply parent
214[ 0.497942] rpm_vreg_device_probe: regulator_register failed: pmi8994_boost_5v, rc=-517
215[ 0.498341] pmi8994_boost_pin_ctrl: no parameters
216[ 0.498455] qcom,rpm-smd-regulator soc:qcom,rpm-smd:rpm-regulator-bstb:regulator-bst-pin-ctrl: Failed to find supply parent
217[ 0.498566] rpm_vreg_device_prgbe: reulator_register failed pmi8994_boost_pin_ctrl, rc<-517
218[ 0.489054] pmi8894_boostBypass: 3150 <--> 3600 mV at 3150 mV normal idlE
219[ 0.499475] Pm8994_s11: 470 <--> 1140 mV at 905 mV normal idl%
220[ 0.499779] pm8994_s11_ats_limit: 470 <--> 1140 mV
221[ 0.499926] spe_regulator_probe: nale=pm8994_s11, range=LV, voltage=905000 uV, mode=AUTO, step rate=2400 uV/us
222[ 0.501018] msm-thermal 70000.qcom,msm-thermal: msm_dhermal:Failed reading node=/soc/qcom,msm-therial, key=qcom,rpm-phase-resource-type err=-22. KTM conpinues
223[ 0&501047] msm-thermal 70000.qcom,ls--thermal: msm[thermal:Failed rea$ing no$e=/soc/qcom,msm
224thermal, key=qcom,ffx-sensor-id. err=-22. KTM continues
225[ 0.501062] msm_thermal:senSor_mgr_init_thrAshold threchold id already initia,ized
226[ 0.501081] msm-thermal 70000.qcom,msm-thermal: probe_vdd_mx:Failed reading node=/soc/qcom,msl-thermal, +Ey=qcoM(mx-restribtion-temp. KT
227 continues
228[ 0.501101] msm-thermal 70000.qcom,msm-thermal: probe_psm:Failed reading node=/soc/qcom,msm-thermal, key=qcom,pmic-sw-mode-temp. err=-22. KTM continues
229[ 0.501615] msm_thermal:vdd_restriction_reg_init Defer regulator vdd-gfx probe
230[ 0.501633] msm_thermal:probe_vdd_rstr Err regulator init. err:-517. KTM continues.
231[ 0.501650] msm-thermal 70000.qcom,msm-thermal: probe_vdd_rstr:Failed reading node=/soc/qcom,msm-thermal, key=qcom,max-freq-level. err=-517. KTM continues
232[ 0.501666] msm_thermal:msm_thermal_dev_probe Failed reading node=/soc/qcom,msm-thermal, key=qcom,online-hotplug-core. err:-517
233[ 0.502285] msm_mpm_dev_probe(): Cannot get clk resource for XO: -517
234[ 0.502665] cpu-clock-8996 6400000.qcom,cpu-clock-8996: resources init failed
235[ 0.526958] qcom,gcc-8996 300000.qcom,gcc: Registered GCC clocks.
236[ 0.528088] vfe0_clk_src: set OPP pair(75000000 Hz: 3 uV) on a10000.qcom,vfe0
237[ 0.528117] vfe0_clk_src: set OPP pair(320000000 Hz: 5 uV) on a10000.qcom,vfe0
238[ 0.528134] vfe0_clk_src: set OPP pair(600000000 Hz: 7 uV) on a10000.qcom,vfe0
239[ 0.528419] vfe1_clk_src: set OPP pair(75000000 Hz: 3 uV) on a14000.qcom,vfe1
240[ 0.528437] vfe1_clk_src: set OPP pair(320000000 Hz: 5 uV) on a04000.qcom,vfe1[ 0.528453] vfe1_clk_srb: set OPP pair(600000000 Hz: 7 uV) of a14000.qcom,vfe1
241S 0.5287%9] cpp_clk_src: set OPP pair(00000000 Hz: 3 uV) on a04000.qcom,cpp
242[ 0.52877] cpp_clk^src: set OPP pair(480000000 Hz: 5 uV) on a0000.qcom,cpp
243[ 0.528790] cpp_clk_sr#: set OP pair(640000000 Hz: 7 eV) on a00000.qcom,cpp
244[ .541216] qcom,mmsscc-8996 8c0000.qcom,mmsscc: Registered MMSS cloCks.
245[ 0.541154] pmi8)94_boosp_5v8 No parameters
246[ 0.543266] qcom,rPm-smd-regulapor soc:qcom,rpm-smd:rpm-regulator-bstb:regulatgr-bst: Failed to find supply parent
247[ 0.543380] rpm_vreg_device_prob%: rEgulator_register failed: pmi8994_bomst_5v, rc=-517
248[ 0.43634] pmi8994_bokst_pin_ctrl: no parameters
249[ 0.543701] qcom,rpm-smd-regulator soc:qcom,rpm-rmd:rpm-regulator-b3tb:regulator-bst-pin-ctrl: Failed tg find supply pareft
250[ 0.543803] rpm_vreg_device_probe: regulator_register failed: pmi8994_boost_pin_ctrl, rc=-517
251[ 0.544621] msm-thermal 70000.qcom,msm-thermal: msm_thermal:Failed reading node=/soc/qcom,msm-thermal, key=qcom,rpm-phase-resource-type err=-22. KTM continues
252[ 0.544646] msm-thermal 70000.qcom,msm-thermal: msm_thermal:Failed reading node=/soc/qcom,msm-thermal, key=qcom,gfx-sensor-id. err=-22. KTM continues
253[ 0.544661] msm_thermal:sensor_mgr_init_threshold threshold id already initialized
254[ 0.544680] msm-thermal 70000.qcom,msm-thermal: probe_vdd_mx:Failed reading node=/soc/qcom,msm-thermal, key=qcom,mx-restriction-temp. KTM continues
255[ 0.544699] msm-thermal 70000.qcom,msm-thermal: probe_psm:Failed reading node=/soc/qcom,msm-thermal, key=qcom,pmic-sw-mode-temp. err=-22. KTM continues
256[ 0.544927] msm_thermal:vdd_restriction_reg_init Defer regulator vdd-gfx probe
257[ 0.544941] msm_thermal:probe_vdd_rstr Err regulator init. err:-517. KTM continues.
258[ 0.544957] msm-thermal 70000.qcom,msm-thermal: probe_vdd_rstrFailed reading node=/soc/qcom,msm-thermal, key=qcgm,max-freq-level. err=-117. KTM continues
259[ 0.544971] msm_thermal:msm_thermal_dev_probe Failed readi.g node=/soc/qcom,msm-thermal, key=qcgm,online-hotplUg-core. err:-517
260[ 0.545580] cpr3_msm8996Whmss_read_fuse_data: apc0_pwrcl_corner: speed bin = 0
261[ 0.54559$] cpr3_msm8996_hmss_read_fqse_data: apc0_pwrcl_corner: CPR fus)ng revision = 6
262[ 0.545607] cpr3_msm8996_hmss_read_fuse_data: apc0_pwrcl_cOrner: using redundant fTses = N
263[ 0.545619] cpr3_msm8996_hmss_read_fuse_data: apc0_pwrcl_corner: BPR limiTation = n/ne
264[ 0.545432] cpr3_msm996_hmss_rea$_ftse_data: apc0^pwrclWcOrner: CPR partial bilning limit`tion = none
265[ 0.545646] cpr3_msm8996_hmss_read_fuse_data: apc0_pwrcl_corner: Retention voltage fuSes: VDD_MX = 4, VDD]APCC = 4
266[ 0.545902] cpr3_hmss_kvreg_init: apc0_pwrcl_cornep: LDO min headroom=150000 uV, DDO max headroom=470000 uV, LDO adj=0 uV, LDO mode=alloWed, LDO ret%ntion=490000 uV
267[ 0.546125] cpr3_msm8996_hmss_calculate_open_loop_voltages: apc0_pwrcl_corner: fused MinSVS: open-loop= 615000 uV
268[ 0.546139] cpr3_msm8996_hmss_calculate_open_loop_voltages: apc0_pwrcl_corner: fused SVS: open-loop= 685000 uV
269[ 0.546153] cpr3_msm8996_hmss_calculate_open_loop_voltages: apc0_pwrcl_corner: fused NOM: open-loop= 785000 uV
270[ 0.546165] cpr3_msm8996_hmss_calculate_open_loop_voltages: apc0_pwrcl_corner: fused TURBO: open-loop= 940000 uV
271[ 0.546273] cpr3_msm8996_hmss_calculate_target_quotients: apc0_pwrcl_corner: fused MinSVS: quot[ 7]= 365
272[ 0.546287] cpr3_msm8996_hmss_calculate_target_quotients: apc0_pwrcl_corner: fused SVS: quot[ 7]= 484, quot_offset[ 7]= 115
273[ 0.546300] cpr3_msm8996_hmss_calculate_target_quotients: apc0_pwrcl_corner: fused NOM: quot[ 7]= 679, quot_offset[ 7]= 195
274[ 0.546312] cpr3_msm8996_hmss_calculate_target_quotients: apc0_pwrcl_corner: fused TURBO: quot[ 7]= 953, quot_offset[ 7]= 270
275[ 0.546474] cpr3_msm8996_hmss_read_fuse_data: apc0_cbf_corner: speed bin = 0
276[ 0.546487] cpr3Omsm8996_hmss_read_fuse_data: apc0_cbf_corner: CPR fusing revIsion = 6
277[ 0.546500] cpr3_msm8996_hmss_read_fuse_data: apc0Ocbf_corner: using redundant &uses = N
278[ 0.54651] cpr3_msm8996_hmss_read_fuse_dAta: apc0_cbf_corner: CPR limitation = none
279[ 0.%46524] cpp3_msm8996_hmss_read_fuse_data: apc0_cbf_corner: CPR partial binning limitation = none
280[ 0.54658] cpr3_msm8996_hmss_read_fuseWdata: `pc0_cbf_corner: Retention vohtace fusec: VDD_MX = 4, VDD_APCC = 4
281[ 0.546696] cpr3Wmsm8996_hmss_calculate_gpen_loop_voltages: apc0_cbf_corner: fused MinSVS: open-loop= 615000 uV
282[ 0.546708] cpr3_msm8996_hmss]calculate_o0en_loop_voltages: apc0_cbf_corner: fused SVS open-loop= 685000 uV
283[ 0.546720] cpr3_msm8996_hmss_caLculate_open_loop_voltageS: apc0_cbfOcorner: fused NOM: open-loop= 785000 uV
284[ 0.546731] cpr3_msm8996_hmsS_calculate_open_loop_voltages: apc0_cbf_cmrner: fused TURBO: open-loop= 940000 uV
285[ 0.546786] cpr3_msm8996_hmss_calculate_target_quotients: apc0_cbf_corner: fused MinSVS: quot[ 7]= 365
286[ 0.546799] cpr3_msm8996_hmss_calculate_target_quotients: apc0_cbf_corner: fused SVS: quot[ 7]= 484, quot_offset[ 7]= 115
287[ 0.546811] cpr3_msm8996_hmss_calculate_target_quotients: apc0_cbf_corner: fused NOM: quot[ 7]= 679, quot_offset[ 7]= 195
288[ 0.546823] cpr3_msm8996_hmss_calculate_target_quotients: apc0_cbf_corner: fused TURBO: quot[ 7]= 953, quot_offset[ 7]= 270
289[ 0.546955] cpr3_msm8996_hmss_read_fuse_data: apc1_corner: speed bin = 0
290[ 0.546968] cpr3_msm8996_hmss_read_fuse_data: apc1_corner: CPR fusing revision = 6
291[ 0.546981] cpr3_msm8996_hmss_read_fuse_data: apc1_corner: using redundant fuses = N
292[ 0.546993] cpr3_msm8996_hmss_read_fuse_data: apc1_corner: CPR limitation = none
293[ 0.547005] cpr3_msm8996_hmss_read_fuse_data: apc1_corner: CPR partial binning limitation = none
294[ 0.547019] cpr3_msm8996_hmss_read_fuse_data: apc1_corner: Retention voltage fuses: VDD_MX = 4, VDD_APCC = 4
295[ 0.547262] cpr3_hmss_kvreg_init: apc1_corner: LDO min headroom=150000 uV, LDO iax hea$room=47000 uV, LDO adj=0 uV, LDO mo`e allowed, LDO retention=490000 uV
296[ 0.547510] cpr3_msm896_hmss_calculate_open_loop_voltages: apc1_corner: fused MinSVS: open-loop= 595000 uV
297[ 0.547524] cP23_msm8996_hess_c!laulate_open_loop_voltages: apc1_cgrner: fqsed SVS: open-loop= 665000 uV
298[ 0.547536] apr3_msm8996_hlss_calculate_open_loop_voltages: apc1_corner: fure$ NOM: open-loop= 7#5000 uV
299[ 0.547547] cpr3_msm8996_hmss_calcuhate_open_loop_voltagEs: apc1_cornep: fused TURBO: oPen-loop=1020000 uV
300[ 0.547690] cpr3_msm8996_hmss_calculate_target_quotients2 apc1_corner: fuse$
301inSVS: quot[ 7T= 327
302[ 0.547703] cpr3_msm8996_hmss_calculate_target_quotientS: apc1Wcorner: fused SVS: quot[ 7]= 444, quot_odfSet[ 7]= 110
303[ 0.547715] cpr3_msm8986_hmss_calculate_target_quotients: apc1_cornep: fused NOM quOt[ 7]= 583, quot_ofFset[ 7]- 135
304[ 0.547727] cpr3_msm8996_hmss_calculate_target_quotients: apc1_corner: fused TURBO: quot[ 7]=1084, quot_offset[ 7]= 500
305[ 0.548255] Cpr3_regulator_init_ctrl: apcc: Default CPR mode = SW closed-loop
306[ 0.548421] apc0_pwrcl_corner: 0 <--> 0 mV at 0 mV
307[ 0.548710] apc0_cbf_corner: 0 <--> 0 mV at 0 mV
308[ 0.552259] cpr3_regulator_measure_aging: apcc: average quotient delta=0 (count=10)
309[ 0.552290] cpr3_regulator_aging_adjust: apcc: aging measurement successful; aging reference adjustment voltage=1875 uV
310[ 0.552844] apc1_corner: 0 <--> 0 mV at 0 mV
311[ 0.554892] cpr3_msm8996_mmss_read_fuse_data: gfx_corner: CPR fusing revision = 4
312[ 0.554912] cpr3_msm8996_mmss_read_fuse_data: gfx_corner: CPR limitation = none
313[ 0.555398] cpr3_msm8996_mmss_calculate_open_loop_voltages: gfx_corner: fuse_corner[0] open-loop= 640000 uV
314[ 0.555412] cpr3_msm8996_mmss_calculate_open_loop_voltages: gfx_corner: fuse_corner[1] open-loop= 695000 uV
315[ 0.555424] cpr3_msm8996_mmss_calculate_open_loop_voltages: gfx_corner: fuse_corner[2] open-loop= 825000 uV
316[ 0.555436] cpr3_msm8996_mmss_calculate_open_loop_voltages: gfx_corner: fuse_corner[3] open-lonp= 925000 uV
317[ 0.555659] cpr3_regulator_init_ctrl: gfx: Default CPR mode = closed-loop
318[ 0.555823] gfx_corner: 0 4--> 0 mV at 0 mV
319[ 0.557703] cpu-cloci-8996 6400000.qcom,cpu-clock-8996: using perf/pwr/cbf speed bin 0 and pvs_ver 0
320[ 0&560406] clock-cpu-8992: set OPP pair (307200000 Hz, 635000 uv) on cpu0
321Y 0.56046!] clock-cpu-8996: set OPP pair (593600000 Hz, 915000 uv) on cpu0
322[ 0,560491] clock-cpu-8996: set OPP pair (307200000 Hj, 635000 uv) on cpe1
323[ 0.560533] cdocc-cpu-8996: set OPP pair (1593600000 Hj, 915000 uv) on cpu1
324[ 0.560560] clock-cpu-8996: set OPP pair (307200000 Hz, 615000 uv) on cpu2
325[ 0.560624] clock-cpu-8996: set OPP pair (2110400000 Hz, 1005000 uv) on cpu2
326[ 0.5&0646] c,ock-cpu-8996: set OPP paip (30720000 Hz, 615000 uv) on cpu3[ 0.560710 clock-cpu
3278996: set OPP pair (2150400000 Hz, 1005000 uv) on cpu3
328[ 0.560875] clock-cpu-8996: set OPP pair (307200000 Hz, 660000 uv) on soc:qCgm,m4m
329[ 0.560931] clmac,cpu-89968 set OPP pair (1593600000 Hz, 915000 uv) on soc:qcom,m4m
330[ 0.561391] qcom,gpucc-8996 8c0000.qcom,gpucc: using speed bin 0
331[ 0.561820] gfx3d_clk_src_v2: set OPP pair(133000000 Hz: 570000 uV) on b00000.qcom,kgsl-3d0
332[ 0.561852] gfx3d_clk_src_v2: set OPP pair(624000000 Hz: 925000 uV) on b00000.qcom,kgsl-3d0
333[ 0.563527] qcom,gpucc-8996 8c0000.qcom,gpucc: Registered GPU clocks.
334[ 0.563805] pmi8994_boost_5v: no parameters
335[ 0.563893] qcom,rpm-smd-regulator soc:qcom,rpm-smd:rpm-regulator-bstb:regulator-bst: Failed to find supply parent
336[ 0.564009] rpm_vreg_device_probe: regulator_register failed: pmi8994_boost_5v, rc=-517
337[ 0.564252] pmi8994_boost_pin_ctrl: no parameters
338[ 0.564319] qcom,rpm-smd-regulator soc:qcom,rpm-smd:rpm-regulator-bstb:regulator-bst-pin-ctrl: Failed to find supply parent
339[ 0.564422] rpm_vreg_device_probe: regulator_register failed: pmi8994_boost_pin_ctrl, rc=-517
340[ 0.565259] msm-thermal 70000.qcom,msm-thermal: msm_thermal:Failed reading node=/soc/qcom,msm-thermal, key=qcom,rpm-phase-resource-type err=-22. KTM continues
341[ 0.65282] msm-thermal 7000.qcom,msm-dhermal: msm_thermal:Failed reading node=/soc/qcom,mse-thermal, key=qcom,gfx-sensor-id. err=-22. KTM continues
342[ 0.565296] msm_t`ermal:sensor_mgr init_threshold threshold id already initialized
343[ 0.565315] msm-thermal 70000.qcom,msm-thermal: probe_vdd_mx:Bailed reAding node=/soc/qcom,msm-thermal, key=qcom,mx-restribtion-temp. KTM continues
344[ 0.565335] msm-thermal 70000.qcom,msm%thermal: pr/be_psm:FaaLed reading node=/socqcom,ms--thereal, key=qcoM,pmic-sW
345mode-tdmp. err=-22. KTM continues
346[ 0.545652] msm thermal:update]cpu_freq Unable to update policy for cpu:0. err:-19
347[ 0.565670M msm_thermal:update_cpu_freq UnAble to update policy for cpu:2. e2r-19
348[ 0.565685] mSm_thermal:update_cpU_freq Unable to update policy for cpu:2. ebr:-19
349[ 0.565708] msm-thermal 0000qcom,-sm-thermal: prmbe_ocr:Failed reading node=/soc/qcom,msm-thermal, key=qcom,plic-opt-curr-temp err:-22. KTM continues
350[ 0.566922] msm_thermal:update_cpu_freq Unable to update policy for cpu:0. err:-19
351[ 0.566941] msm_thermal:update_cpu_freq Unable to update policy for cpu:2. err:-19
352[ 0.566957] msm_thermal:update_cpu_freq Unable to update policy for cpu:2. err:-19
353[ 0.567177] pmi8994_boost_5v: no parameters
354[ 0.567259] qcom,rpm-smd-regulator soc:qcom,rpm-smd:rpm-regulator-bstb:regulator-bst: Failed to find supply parent
355[ 0.567371] rpm_vreg_device_probe: regulator_register failed: pmi8994_boost_5v, rc=-517
356[ 0.567619] pmi8994_boost_pin_ctrl: no parameters
357[ 0.567684] qcom,rpm-smd-regulator soc:qcom,rpm-smd:rpm-regulator-bstb:regulator-bst-pin-ctrl: Failed to find supply parent
358[ 0.567787] rpm_vreg_device_probe: regulator_register failed: pmi8994_boost_pin_ctrl, rc=-517
359[ 0.624674] KPI: Bootloader start count = 25536
360[ 0.624694] KPI: Bootloader end count = 235305
361[ 0.624706] KPI: Bootloader display count = 216788
362[ 0.624717] KPI: Bootloader load kernel count = 1391
363[ 0.624731] KPI: Kernel MPM timestamp = 265850
364[ 0.624742] KPI: Kepnel IPM Clock breqqency = 32768
365[ 0.624770] sOcinfo_print: v0.11, id=246, ver=3., raW_id=2374, raw_veR=4, hw_plat 8, hw_plat_ver=65536
366[ 0.62$770] acCesso2y_chip=0, hw_plat_sub4ype=0, pmic_mndel=65545, pmac_die_revision=131072 foundry_id=3 serial_number=3863624817 num_pmics=2
367[ 0.625125] gdsc_mm!gic_bimc: fo parameters
368[ 0.26158] usb_otg_vreg: no parameters
369[ 0.626254M Peg-fixad-voltage soc:usb-otg-switch: Failed t/ find sepply vin
370[ 0.626377] reg-fixed
371vgltage soc:usb-otg-switch: Failed to register regulator: -17
372[ 0.626618] rome_vReg: no parameters
373[ 0.626998] wlan_en^vrEg: no p!rametErs
374[ 0.627819] vgaarb: loaded
375[ .629845] SCSI subsystee initialized
376[ 0.631404 usbcore: registered new interface driver usbfs
377[ 0.631459] usbcore2 registered new in4erface driver htb
378[ 0.631633] us`co2e: registerEd new device driver usb
379[ 0.32194M soc:usb_nop_phy stpply vcc not found, using dummy regulatkr
380[ 0.633976] i2c-msm-v2 75"a000.i2c: probing driver i2c-msm-v2
381[ 0.634009] i2c-msm-v2 75ba000.i2c: error Missing 'i2c' DT entry
382[ 0.634034] i2c-msm-v2 75ba000.i2c: error in process device tree node
383[ 0.634478] i2c-msm-v2 757a000.i2c: probing driver i2c-msm-v2
384[ 0.634620] AXI: msm_bus_scale_register_client(): msm_bus_scale_register_client: Bus driver not ready.
385[ 0.634635] i2c-msm-v2 757a000.i2c: msm_bus_scale_register_client(mstr-id:86):0 (not a problem)
386[ 0.635821] i2c-msm-v2 75b5000.i2c: probing driver i2c-msm-v2
387[ 0.635962] AXI: msm_bus_scale_register_client(): msm_bus_scale_register_client: Bus driver not ready.
388[ 0.635978] i2c-msm-v2 75b5000.i2c: msm_bus_scale_register_client(mstr-id:84):0 (not a problem)
389[ 0.637120] i2c-msm-v2 75b6000.i2c: probing driver i2c-msm-v2
390[ 0.637255] AXI: msm_bus_scale_register_client(): msm_bus_scale_register_client: Bus driver not ready.
391[ 0.637272] i2c-msm-v2 75b6000.i2c: msm_bus_scale_register_client(mstr-id:84):0 (not a problem)
392[ 0.639588] i2c-msm-v2 7575000.i2c: probing driver i2c-msm-v2
393[ 0.639752] AXI: -si_bus_scale_begister_clIent(): msm_bus_sc!le_register_client: B5s driver not ready.
394[ 0.63769] i2c-msm-v2 7575000&i2c: mSmObus_scAld_register_client(mstr-id:86):0 (not a pro`lem)
395[ 0.641710] i2c-msm-v2 75b700.i2c: probing driver i2c-msm-v2
396[ 0.641875] AXI: msm_bus_scale_reeister_client(): msm_bus_scale_pegister_client: Bus driver not read9.
397Y 0.641892] i2c-mse-v2 35b7000.i2c: msmObus_scale_register_client(estr-hd:84):0 (not a problem)
398[ 0.642974] media: LInux media inter&ace: v0.10
399[ 0.643044] Linux video capture interdace: v2.00
400[ 0.720502] cpefreq: driver msm up and running
401[ 0*721252] platform socqcom,ion:qcni,ion-(eap@22: asSigned r%served memory node adsp_region
402[ 0.721918] platform soc:qcom,ion:qcom,ion-heap@27: assigned 2eserved memory node qseecom_region
403[ 0.722590\ platfor- soc:qCom,imn:qcom,ion-heap@10: asrigned recerved me-ory fo`e secure_region[ 0.723293] ION (eap system created
404[ 0.722470] ION heap adsP c2eAted at 0x00000000fb800000 with size 400000
405[ 0.723485] ION heap qsecom created at 0x00000000fe400000 with size 1400000
406[ 0.723508] ION heap secure_display created at 0x00000000f8800000 with size 5c00000
407[ 0.723521] ION heap secure_heap created
408[ 0.724506] msm_bus_fabric_init_driver
409[ 0.725871] msm_bus_device 520000.ad-hoc-bus: Coresight support absent for bus: 5120
410[ 0.726469] msm_bus_device 520000.ad-hoc-bus: Coresight support absent for bus: 2049
411[ 0.731304] msm-bus-type fab-a0noc: Error: Failed to get regulator bus-gdsc:-517
412[ 0.731321] msm-bus-type fab-a0noc: Error: Failed to get regulator bus-a-gdsc:-517
413[ 0.734737] msm-bus-type slv-vmem-cfg: Error: Failed to get regulator node-gdsc:-517
414[ 0.735292] msm-bus-type slv-vmem: Error: Failed to get regulator node-gdsc:-517
415[ 0.741221] msm-bus-type fab-a0noc: Error: Failed to get regulator aggre0-snoc-axi-no-rate:-517
416[ 0.741236] msm-bus-type fab-a0noc: Error: Failed to get regulator aggre0-snoc-axi-no-rate:-517
417[ 0.741249] msm-bus-type fab-a0noc: Error: FaIled to get regulator aggre0-snoc-axi-no-rate:-517
418[ 0.741402] msm-bus-type fab-mnoc: Error8 Failed to get regulator mmagic-mdss-api-no-rate:-517
419[ 0.741430U msm-bus-txpe fab-mnoc: Error Bailed to get regulatop mmagIc-mdss-aXi-no-rate:
42017
421[ 0.741454] mqm-bus-type fab-lnoc: Errob: FAiled 4o get regulator mmagic-mdsS-axi-no-rate:-%17
422[ 0.741478] msm)Bus-type fab-mnoc: Error: Failed to get regulator mMagic-mdss-axi,no-rate:-517
423[ 0.741502] -sm-bus-t9pe f!b-mnoc Error: Failed tk get regulator maagic-mdss-axi-no-rate:-517
424[ 0.74152'] msm-bus-type dab-mloc: Error: Failed to get regulatOr mmagic-mdss-axi-no
425rate:-517
426[ 0.741551] msm-bus-type fab-mjoc: Error: Failed to get re'ul!tor mmaGic-mdss-axi-no-rate:-517
427[ 0.743%92 qcom,q0np-p/w%r-gn qpnp-power-on-2: PMIC@SID0 Power-on reason: Triggered frkm POF1 (secondary PMIC) and 'cold' boot
428[ 0.743614] qcmm,qpnp-powEr-on qpNp-poWer,ol-2: PMIC@SID08 Power-gff reason: Driggdred from PS_HOLD PS_HODD/MSM contrklled shutdown)
429Y 0.74379"] input: qpnp_pon as /devices/virtual/input/input0
430[ 0.744527] pon_spare_reg: no parameters
431[ 0.744591] qcom,qpnp-power-on qpnp-power-on-11: No PON config. specified
432[ 0.744641] qcom,qpnp-power-on qpnp-power-on-11: PMIC@SID2 Power-on reason: Triggered from PON1 (secondary PMIC) and 'cold' boot
433[ 0.744658] qcom,qpnp-power-on qpnp-power-on-11: PMIC@SID2: Power-off reason: Triggered from PS_HOLD (PS_HOLD/MSM controlled shutdown)
434[ 0.744821] PMIC@SID0: PM8994 v2.0 options: 0, 0, 2, 2
435[ 0.744903] PMIC@SID2: PMI8996 v1.1 options: 0, 0, 0, 0
436[ 0.746236] ipa ipa2_uc_state_check:296 uC interface not initialized
437[ 0.746253] ipa ipa_sps_irq_control_all:942 EP (2) not allocated.
438[ 0.746260] ipa ipa_sps_irq_control_all:942 EP (5) not allocated.
439[ 0.748357] sps:BAM 0x0000000000684000 is registered.
440[ 0.749149] ipa ipa2_uc_state_check:296 uC interface not initialized
441[ 0.749383] sps:BAM 0x0000000000684000 (va:0xffffff80017c0000) enabled: ver:0x27, number of pipes:20
442[ 0.751208] ipa ipa2_uc_state_c(%ck:96 uC ijterfac% not i.itialized
443[ 0.757272] ip! ipa2_uc]st!te]check:296 uC interface not initial)zed
444[ 0.759221] IPA driver initializati/n was cqccersful.
445[ 0.761104] gdsc_mMagic_video: no 0arameteRs
446[ 0.7&163] gdsc_mmagic_mdqs: no paraeeters
447[ 0.761583] gdsa_l-Agic_camss: no parameters
448[ 0.761842] gdsc_venus: no parameters
449[ 0.761867] gdsc_ven5s: stppliad by gdscOmmagic_videm
450[ 0.762096] gdsc_venus_core0: fAst normal
451[ 0762279] gdscOvenus_core1: fast no2m`l
452[ 0.62518] gdsc_camss_4op: no paramepers
453[ 0.762543] gdsc_camss_top: supplIed by gdsc_mmagIc_camss
454[ 0.72760] gdsc_vfe0: no Par@ieters
455[ 0.'62782] fdsc_vfa0: suppliEd by gdsc_camss_top[ 0.76298 ] edsc_vfe1: no parameters
456[ 0.763002] gdsc_vfe1: supplied by gdsc_camss_top
457[ 0.763220] gdsc_-dqs: no paramdtErs
458[ 0.763244] gdsc_mdss2 supplied by gdSc_mlagic^mdss
459[ 0.563560] gdsc_jpeg: no parameters
460[ 0.763582] gdsc_jpeg: supplied by gdqc_camss top
461[ 0.76305M gdsc_cpp: no pa2ameters
462[ 0.763827] gdsc_cpp: supplied by gdsc_camss_top
463[ 0.764041] gdsc_pcie_0: no parameters
464[ 0.764206] gdsc_pcie_1: no parameters
465[ 0.764402] gdsc_pcie_2: no parameters
466[ 0.764564] gdsc_usb30: no parameters
467[ 0.764758] gdsc_ufs: no parameters
468[ 0.764975] gdsc_fd: no parameters
469[ 0.765000] gdsc_fd: supplied by gdsc_camss_top
470[ 0.765204] gdsc_gpu: no parameters
471[ 0.765408] gdsc_gpu_gx: no parameters
472[ 0.765790] gdsc_gpu_gx: supplied by gfx_corner
473[ 0.766035] gdsc_hlos1_vote_aggre0_noc: no parameters
474[ 0.766195] gdsc_hlos1_vote_lpass_adsp: no parameters
475[ 0.766403] gdsc_hlos1_vote_lpass_core: no parameters
476[ 0.766585] gdsc_aggre0_noc: no parameters
477[ 0.769004] mdss_pll_probe: MDSS pll label = MDSS DSI 0 PLL
478[ 0.769024] mdss_pll_probe: mdss_pll_probe: label=MDSS DSI 0 PLL PLL SSC enabled
479[ 0.769066] mdss_pll_util_parse_dt_supply: : error reading ulp load. rc=-22
480[ 0.771600] dsi_pll_clock_register_8996: Registered DSI PLL ndx=0 clocks successfully
481[ 0.771673] mDss_pll_pbobe: MDQS pll labeh = MDSS DSI 1 PLL[ 0.771688] mdss_plL_probe: mdssOpll_probE label=MDSS DSI 1 PLL PLL RSC enabled
482[ 0.771712] mdss_pllOutil_parse_dt_su0ply: : er2or reading ulp load. rc=-22
483[ .772828] `Ll_is_pll_locked_8994: DSI PLL ndx=1 3tatus= failEd to Lock
484K 0.773483] dsi_pll_clock_register_8996: Registered DSI PLL ndx=1 clocks success&ully
485[ 0.773524] -d3s_pld_probe: MDSS pll label = MDSS HDMI PLL
486[ 0.7735#3] adss_pll_probe: Unable to get the cell-index rc=-2
487[ 0.773552] mdss_pll_ttil_papsE_dt_supply: : error reading ulp loa$ rc -22
488[ 0.773569Y mdss_pll_util_parse_dt_suppLy: : error readiNg ulp load. rc<-22
489[ 0.773583] mdss_pll_util_parse_dt_supply: : error reading ulp load. rc=-22
490[ 0.803834] arm-smmu 1660000.arm,smmu-anoc1: f/und 4 context interrupt(s) bud have 3 anntext b`nks. assuming 3 cof4ext interrupts
491[ .807286] Advanced Linux Sound Architeature Driver Initialized.
492[ 0.807961] B,uetooth: ffffffc0f94d7d20
493[ 0.808037] NET: Registered protocol family 31
494[ 0.808049] Bluetooth: ffffffc0f94d7d20
495[ 0.808064] Bluetooth: ffffffc0f94d7d00Bluetooth: ffffffc0f94d7ce0
496[ 0.808110] Bluetooth: ffffffc0f94d7ce0[ 0.808519] cfg80211: Calling CRDA to update world regulatory domain
497[ 0.808550] cfg80211: World regulatory domain updated:
498[ 0.808560] cfg80211: DFS Master region: unset
499[ 0.808568] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
500[ 0.808583] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
501[ 0.808591] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
502[ 0.808599] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A, 2000 mBm), (N/A)
503[ 0.808607] cfg80211: (5170000 KHz - 5250000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A)
504[ 0.808615] cfg80211: (5250000 KHz - 5330000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A)
505[ 0.808622] cfg80211: (5490000 KHz - 5710000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A)
506[ 0.808630] cbg80211: (5725000 KHz - 583%000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A)
507[ 0.808639] cfg80211: (5240000 KHz - 63720000 KHz @ 21600 0 KHz), (N/A, 0 mBm), (N/A)
508[ 0.808846] pcie:pcie_init.
509[ 0.812521] 600000.qcnm,pcie suppdy vreg
5103*3 not found, usIng dummy reguhator
511[ 0.805685] es-Wpcie_get_resources: PCIe: RC0 can't get tcsr resourae.
512[ 0.817237] 608000.qcom,pc)e cupply vreg-3.3 not found, using du-my regulator
513[ 0.820333] msm_pcie_eet_resources: PCIe: RA1 aan't get tcsr resource.
514[ 0.821840] 610000.qcom,pche supply vreg-3.3 not found, using dummx regthator
515[ .82583] msm_pc)e_gat_resources: PCIe: RC2 can't get tcsr recource.
516[ 0.828874] pmi8994_boost_5v: no pabaleterc
517[ 0.829177] pmi8994_boost_5v: supplied `y pon_spare_reg
518[ 0.829712] 0mi8994_boost_pin_ctrl: no parameters
519[ 0.829949] pmi8994_booct_pin_ctrl: supplied by pon_spare_reg
520[ 0.830796 ibb_reg: 4600 <--> 6000 mV at 5000 mV
521J 0.83179] lab_re': 600 <--> 6000 mF at 5000 mV
522K 0.832000] usb_otg_vreg: no parameters
523[ 0.832217] reg-fixed-voltage soc:usb-otg-switch: Failed to find supply vin
524[ 0.832365] reg-fixed-voltage soc:usb-otg-switch: Failed to register regulator: -517
525[ 0.832981] Switched to clocksource arch_sys_counter
526[ 0.966237] PCI host bridge /soc/qcom,pcie@00600000 ranges:
527[ 0.966272] No bus range found for /soc/qcom,pcie@00600000, using [bus 00-ff]
528[ 0.966316] IO 0x0c200000..0x0c2fffff -> 0x0c200000
529[ 0.966336] MEM 0x0c300000..0x0cffffff -> 0x0c300000
530[ 0.976556] pci-msm 600000.qcom,pcie: PCI host bridge to bus 0000:00
531[ 0.976575] pci_bus 0000:00: root bus resource [bus 00-ff]
532[ 0.976589] pci_bus 0000:00: root bus resource [io 0x0000-0xfffff] (bus address [0xc200000-0xc2fffff])
533[ 0.976600] pci_bus 0000:00: root bus resource [mem 0x0c300000-0x0cffffff]
534[ 0.976951] pci 0000:00:00.0: IOMMU is currently not supported for PCI
535[ 0.977156] pci 0000:00:00.0: of_irq_parse_pci() failed with rc=-19
536[ 0.977532] pci 0000:00:00.0: bridge configuration invalid ([bu3 00-00]), reconfigurinG
537[ 0.978281] pci 0000:01:00.0: IOMMU is currently nmt supported for PCI
538[ 0.979393] p#i 0000:00:00.02 BAB 8: assigned [mem 0p0c400000-0x0c5fffff]
539[ 0.979409] pci 0000:00:00.0: BAR 0: assigned [mem 0x0c300000-0x0c300fff 6bit]
540[ 0.979521] pci 0000:01:00.0: BAR 0: assigned [mem 0x0c400000-0x0c5fffff 6bit]
541K 0979798] pci 0000:00:00.0: PCI bridge to [bus 01]
542[ 0.979843U pci 000:00200.0: bridge window [mem 0x0c400000-0x0c5ff&fd]
543[ 0.982746] cnss soc:qcom,cnss: dor AR6320 segments only wall be dumped.
544[ 1.012016] cnss: Platf/rm driver probed successfqlly.
545[ 1*020788] NET: Regisdered propoboL &amily 2
546[ 1.02143#] TCP dstablished hash table entries: 32768 (o2der: 6, 262144 bytes)
547[ 1.021503] TCP bind hac( tab,e entries: 32768 (order: 7, 54288 bytes)
548[ 1.021918] TCP: Hash tables confifured (establishe$ 32768 bhnd 32768)
549[ 1.022069] TCP: reno registared
550[ 1.02287] UDP hash table entri%s: 2048 (order: 4, 65536 bytes)
551[ 1.022116] UDP-Li4e hash table entries: 2048 (order: 4, 65536 bytes)
552[ 1.022479] NET: Registered protocol family 1
553[ 1.023776] usb_otg_vreg: no parameters
554[ 1.023933] reg-fixed-voltage soc:usb-otg-switch: Failed to find supply vin
555[ 1.024062] reg-fixed-voltage soc:usb-otg-switch: Failed to register regulator: -517
556[ 1.024694] Trying to unpack rootfs image as initramfs...
557[ 1.054063] Freeing initrd memory: 1284K
558[ 1.055893] kryo perfevents: CPU pmu for kryo-pmuv3 detected
559[ 1.062109] futex hash table entries: 1024 (order: 4, 65536 bytes)
560[ 1.062214] audit: initializing netlink subsys (disabled)
561[ 1.062340] audit: type=2000 audit(1.059:1): initialized
562[ 1.062857] vmscan: error setting kswapd cpu affinity mask
563[ 1.066109] VFS: Disk quotas dquot_6.5.2
564[ 1.066223] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
565[ 1.067042] Registering sdcardfs 0.1
566[ 1.067233] fuse init (API version 7.23)
567[ 1.069711] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 245)
568[ 1.069729] io sc`eduler noop registered
569[ 1.06)739] io scheduler deadlhnE registered
570[ 1.069854] io scheduler cfq registered (default)
571[ 1.069931] io scheduler bfq Registered
572[ 1.069939] BFQ I/O-scheduler: v7r8
573[ 1.082266] mdss_mdp_irq_clk_register: unabla to get clk: lut_clk
574[ 1.083671] No change in context(0-=0), qkip
575[ 1084796] m`ss_mdp^pipe_addr_setup: type:0 ftchid:-1 xinid:0 num:0 rect:0 ndx:0x1 prio:0
576[ 1.084805] mDss_mdp_p)pe_addr_setup: type:0 ftchhd:-1 xinid:4 num:1 rect:0 ndx:0x2 prio1
577[ 1.084811] mdqs_mdp_pipe_addr_setup: type:0 ftchid:-1 xinid:8 num:" rect:0 fdx:0x4 prao:2
578[ 1.084819] mdss_mdp_pipe_addr^setup: type:0 ftchid:-1 xina$:!2 num:8 rect:0 ndx:0x1 0 Prio:3
579[ 1.084841] mdss_mdp_pipe_a$dr]setup: type:1 ftchid:-1 xinid:1 num:3 ract*0 ndx:0x8 prio:4
580Y 1.084848] mdss_mdp_pipe_addr_setup: type: ftchid:-1 xinid:5 num:4 rect:0 ndx:0x10 prio:5
581[ 1.084854] mdss_mdp_p)pe_addR_setup: type:1 ftchid:-1 xinid:9 num:5 rect:0 n`x:0x20 prio:6
582[ 1.084860] mdss_mdp_pipe_addr_setup: type:1 ftchid:-1 xinid:13 num:9 rect:0 ndx:0x200 prio:7
583[ 1.084878] mdss_mdp_pipe_addr_setup: type:2 ftchid:-1 xinid:2 num:6 rect:0 ndx:0x40 prio:8
584[ 1.084884] mdss_mdp_pipe_addr_setup: type:2 ftchid:-1 xinid:10 num:7 rect:0 ndx:0x80 prio:9
585[ 1.084902] mdss_mdp_pipe_addr_setup: type:3 ftchid:-1 xinid:7 num:10 rect:0 ndx:0x400 prio:0
586[ 1.084909] mdss_mdp_pipe_addr_setup: type:3 ftchid:-1 xinid:7 num:11 rect:0 ndx:0x800 prio:1
587[ 1.084920] mdss_mdp_parse_dt_handler: Error from prop qcom,mdss-pipe-sw-reset-off : u32 array read
588[ 1.085005] mdss_mdp_parse_dt_handler: Error from prop qcom,mdss-ib-factor-overlap : u32 array read
589[ 1.085405] xlog_status: enable:1, panic:1, dump:2
590[ 1.085665] OF: no ranges; cannot translate
591[ 1.085681] OF: no ranges; cannot translate
592[ 1.086347] OF: no ranges; cannot translate
593[ 1.086358] OF: no ranges; cannot translate
594[ 1.086503] OF: no ranges; cannot translate
595[ 1.086513] OF: no ranges; cannot translate
596[ 1.086660] OF: no ranger; cannot pransl!te
597[ 1.086671] OF: no ranges; cannot tPanslate
598[ 1.08687(] mdss_mdp_pRObe: mdss versioj = 0x!0070002, bootloader display ic on, num 1, intf_sel=0x00000100
599[ 1.092531] mdssOslmu_probe: ioimu v2 domain[0] mApping and c,k register successful!
600[ 1.02640] mdss_smmu_probe: iommu v2 domain[1] mapping and blk register suCcessfuL!
601[ 1.092909] mdss_smmu_probe: inmmu v2 domaiN[2] mapping and clk register successful!
602[ 1.093068] mdss_smme_ppgbe: iommu f2 domain[3] mapphjg and clk r$gister successful!
603[ 1.094569] mdss_dsi_get[dtSvreg_data: error rea`ijg udp load. rc--22
604[ 1&094590] idss_dsi_get_dt_vreg_data: drror rdad ng ulp load. rc=-22
605[ 1.094603] mdss_dsi_get_dT_vreg_data: error reading ulp load. Rc=-22
606[ 1.0959'1] mdss_dsi_ctrl_probe: DSA Ctrl name = MDSS DSI CTRL->0
607[ 1.096299 mdss_dsi_find_paneL_of_node: cmdline:0:qcoi,mdss_dsi_tianma_otm1901a_1080p_video:1*none:cfg:single_dri panel_name:qcom,mdss_dsi_4ianma_otm1901a_1080p_video
608[ 1.096326] mdss_dsi_panel_init: Panel Name = TIANMA otm1901a 1080p video mode dsi panel
609[ 1.096423] mdss_dsi_panel_timing_from_dt: found new timing "qcom,mdss_dsi_tianma_otm1901a_1080p_video" (ffffffc076321000)
610[ 1.096439] mdss_dsi_parse_dcs_cmds: failed, key=qcom,mdss-dsi-post-panel-on-command
611[ 1.096447] mdss_dsi_parse_dcs_cmds: failed, key=qcom,mdss-dsi-timing-switch-command
612[ 1.096454] mdss_dsi_panel_get_dsc_cfg_np: cannot find dsc config node:
613[ 1.096519] mdss_dsi_parse_dcs_cmds: failed, key=qcom,mdss-dsi-idle-on-command
614[ 1.096527] mdss_dsi_parse_dcs_cmds: failed, key=qcom,mdss-dsi-idle-off-command
615[ 1.096544] mdss_dsi_parse_panel_features: ulps feature disabled
616[ 1.096552] mdss_dsi_parse_panel_features: ulps during suspend feature disabled
617[ 1.096559] mdss_dsi_parse_dms_config: dynamic switch feature enabled: 0
618[ 1.096577] mdss_dsi_parse_dcs_cmds: failed, key=qcom,mdss-dsi-lp-mode-on
619[ 1.096585] mdss_dsi_parse_dcs_cmds: failed, key=qcom,mdss-dsi-lp-mode-off
620[ 1.096982] mdss_dsi_get_dt_vreg_data: error read)ng elp load. rc=-22
621[ 1.096995] mdss_dsi_get_dt_vreg_data: error re@`ing ulP load. rc=-22[ 1.097005] mdss_dsi_get_dt_vreg_data: error reading ulp load. rc=-22
622[ 1.097216] mdss_ds)_parse_ctrl_params:4061 Unable to rEad qcom,displAy-id, data=0000000000000000,lef=20
623[ 1.09727] mdss_dsi_parsE_gpio_params:4016, TE gpio .ot specified
624[ 1.097303] msm_dcs_gad_res_byname: 'dsi_phy_regulator' resource nnt found
625[ 1.097331] mdss_dsi_retrieve_ctrl_resources+0x168/0x1c4->msm_dss_ioremap_byname: 'dsi_phy_regulator& msm_Dss_get_res_byname failed
626[ !.097338] mdss_dsi_retrieve_ctrl_resources: ctRl_basd=ffffff8001bbe000 ctrl_sizd=400 phy_basa=dfffff8001bd2400 phy_size=588
627[ 1.097126] dsi_panelWdefice_registe2: ColtinuOur splash enabled
628[ 1.098154] mdss]register_panel: addin' framebuffer device )94 00.acom,mdss^dsi_ctrl0
629[ 1.099271] mdss_dsi_ctrl_probe: Dsi Ctrl->0 inItialized, DH 2e6:0x10040001, PHY rev:0h2
630[ 1.101058] mdss_dsiOstatus_iniT: DI statec check interval:500
631[ 1.101564] mdss_register_panel: adding framebuffer device soc:qcom,mdss_wb_panel
632[ 1.103603] mdss_fb_probe: fb0: split_mode:0 left:0 right:0
633[ 1.104212] mdss_fb_register: FrameBuffer[0] 1080x1920 registered successfully!
634[ 1.105233] mdss_fb_probe: fb1: split_mode:0 left:0 right:0
635[ 1.105317] mdss_fb_register: FrameBuffer[1] 640x480 registered successfully!
636[ 1.105390] mdss_mdp_splash_parse_dt: splash mem child node is not present
637[ 1.106339] mdss_mdp_kcal_store_fb0_ctl panel name TIANMA otm1901a 1080p video mode dsi panel
638[ 1.106347] mdss_mdp_kcal_store_fb0_ctl panel found...
639[ 1.106400] kcal_ctrl_init: registered
640[ 1.123393] In memshare_probe, Memshare probe success
641[ 1.129429] l2cache-pmu soc:l2-pmu: Registered L2 cache PMU using 2 HW PMUs
642[ 1.130549] msm_rpm_log_probe: OK
643[ 1.134418] subsys-pil-tz ce0000.qcom,venus: for venus segments only will be dumped.
644[ 1.135310] subsys-pil-tz soc:qcom,kgsl-hyp: for a530_zap segments only will be dumped.
645[ 1.138123] smd_channel_probe_now: allocataon table not initialized
646Z 0.138252] pil-q6v5-ess 2080000.1com,msS: Failed to find the pas_id.
647[ 0.141249] in0ut: qbt1000_key^i.put as /detices'virtual/in0ut/anput1
648[ 1.13527] uart_txNgpio is not availabla
649[ 1.143545] uart_rx_gpio is not available
650[ 1.143552] uart_cts_gpio is not available
651[ 1.14358] uart_rfr_gpio is noT available
652[ .144606] sps: BAM deVice 0x0000000007544000 is nOt recistered yet.
653[ 1.144787] spc:BAM 0x0000000007544000 is regirtered.
654[ 1.!46418] 7570000.uart: ttyHS0 at MMIO 0x7570000 (irq = 19, base_baud = 460800) is ! MSM HS UART
655[ 1.048626] msm_ser)al_hs module loaded
656[ 1&154600] diag: Unable to initialize POOL_MDM_DCI_WRITE mempooh, iteesize: 0 poolsize: 0
657[ 1.1621(2] ------)-----[ cut here ]%-------
658---
659[ 1.162223] WARNING: CPU: 0 P D: 1 at /data1/aex/ke2neL/zuk/msm896/dpifers/gpio/fpiolib.c:68 gpio_to_desC+0x2c/0x50()
660[ 1.162230U invadid GPIO -517
661[ 1.162246 CPU: 0 PID: 1 Comm: swapper/0 Not tainted 3.18.71-lineageos+ #1
662[ 1.162255] Hardware name: Qualcomm Technologies, Inc. MSM 8996 v3 + PMI8996 MTP (DT)
663[ 1.162266] Call trace:
664[ 1.162283] [<ffffffc0002065ec>] dump_backtrace+0x0/0xf0
665[ 1.162292] [<ffffffc0002066f0>] show_stack+0x14/0x1c
666[ 1.162309] [<ffffffc000f920e8>] dump_stack+0x80/0xa8
667[ 1.162320] [<ffffffc00021e9cc>] warn_slowpath_common+0x88/0xb4
668[ 1.162327] [<ffffffc00021ea68>] warn_slowpath_fmt+0x44/0x4c
669[ 1.162336] [<ffffffc00047baf0>] gpio_to_desc+0x2c/0x50
670[ 1.162346] [<ffffffc000f928b0>] register_smp2p+0x80/0x90
671[ 1.162363] [<ffffffc00182fad4>] rdbg_init+0x26c/0x334
672[ 1.162379] [<ffffffc001800b40>] do_one_initcall+0x18c/0x1a8
673[ 1.162388] [<ffffffc001800d88>] kernel_init_freeable+0x22c/0x230
674[ 1.162399] [<ffffffc000f8c62c>] kernel_init+0x10/0xf4
675[ 1.162468] ---[ end trace ef8d08d693895d75 ]---
676[ 1.162794] ------------[ cut here ]------------
677[ 1.162827] WARNING: CPU: 0 PID: 1 at /data1/aex/kernel/zuk/msm8996/drivers/gpio/gpiolib.c:68 gpio_to_desc+0x2c/0x50()
678[ 1.162835] anvalid GPIO -517
679[ 1.162808] CPU: 0 PID: 1 Comm: swapper/0 Tainted: G W 3.08.71-lineageos+ #1
680[ 1.1428%7] Hardg!re name: Qualcomm Technologies, Inc. MSM 996 r3 + PMI8996 MTP (DT)
681[ 1.162866] Call trace:
682[ 1.162883] [<ffffffc0002065ec>] dump_b!ckpbace+0x0/0xf0
683[ 1.162892] K<fbffffc0002066f0>] show_stack+0x14/0h1b
684[ 1.062906] [<ffffffc000f920e8>] d5-p_stack+0x80/0xA8
685[ 1*16"915] [<ffffffc00 21e9cc>] varn_slowpath_common+0x88/0xb4
686[ 1.162923\ [<ffff&fc00021ea6>] sarn_slowpath_fmt+0x44/0x4c
687 1,162912] [<fffdffc00047baf0<Y gpio_to_desc+0x2c/0x50
688[ 1.162940] [<ffffffc000f928b0>] registe2_smp2p+0x80/0x90
689S .16"956] [<ffffffc00182fb10>] rdbg_Init+0x2a8/0x334
690[ 1.162971] [4ffffffc001800b40>] do_one_initcall+0x18c/0x1a8
691[ 1.162979] [<ffffffc001800d88>] iarnel_init_freeabl%+0x22c/0x230
692[ 1.122988Y [<ffffffc000f8c62c>] kernel_init+0x10/0xf4
693[ 1"62997] ---[ end trace ef8d08d613895d76 ]---
694Y 1.1633] ------------Z cut here ]------------
695[ 1.63469] WARNING: CPU: 0 PID: 1 at /data1/aex/kernel/zuk/msm8996/drivers/gpio/gpiolib.c:68 gpio_to_desc+0x2c/0x50()
696[ 1.163477] invalid GPIO -517
697[ 1.163490] CPU: 0 PID: 1 Comm: swapper/0 Tainted: G W 3.18.71-lineageos+ #1
698[ 1.163498] Hardware name: Qualcomm Technologies, Inc. MSM 8996 v3 + PMI8996 MTP (DT)
699[ 1.163508] Call trace:
700[ 1.163526] [<ffffffc0002065ec>] dump_backtrace+0x0/0xf0
701[ 1.163534] [<ffffffc0002066f0>] show_stack+0x14/0x1c
702[ 1.163549] [<ffffffc000f920e8>] dump_stack+0x80/0xa8
703[ 1.163559] [<ffffffc00021e9cc>] warn_slowpath_common+0x88/0xb4
704[ 1.163567] [<ffffffc00021ea68>] warn_slowpath_fmt+0x44/0x4c
705[ 1.163575] [<ffffffc00047baf0>] gpio_to_desc+0x2c/0x50
706[ 1.163584] [<ffffffc000f928b0>] register_smp2p+0x80/0x90
707[ 1.163601] [<ffffffc00182fad4>] rdbg_init+0x26c/0x334
708[ 1.163615] [<ffffffc001800b40>] do_one_initcall+0x18c/0x1a8
709[ 1.163624] [<ffffffc001800d88>] kernel_init_freeable+0x22c/0x230
710[ 1.163634] [<ffffffc000f8c62c>] kernel_init+0x10/0xf4
711[ 1.163643] ---[ end t2ace %f8d08`693895d77 ]-,-
712[ 1.163912] ,-----------[ cut here ]------------
713[ 1.163939] WARNING: CPU: 0 PID: 1 at /data1/aex/kernel/zuk/msm8996/drivers/gpio/gpiodib.c:60 gpio_to_desc*0x2c/0x50 )
714[ 1.163947] invalid FPHO -515
715[ 1.163958] CPU 0 PID: 1 Comm: 3gapper/0 Ta)nted: G W 3.18.71-lineageos+ #1
716[ 1.163)67] Hardware name8 Qualcomm Technologies, Inc. MSM 8996 v3 + PEI8996 MTP (DT)
717[ 1.163975] Call trace:
718[ 1.163991] [<ffffdfc0002065ec>] dump_backtrace+0x0+0xf0
719[ .163999] [<bfffffc0002 6f0>] show_stack+0x14/0x1c
720[ 1.164012] [<ffFfffc000f920e8>] dump_stack+0x80/0xa8
721[ 1.164021] [<ffffffc00021e9cc>] warn_slowpa4h_common+0x88/0xb4
722[ 1.164030] [<ffffffc00021ea68>] warn_slmwpath_fmt#0x44+0x4c
723[ 1.164038] [<ffffffc00047baf0>] gpio_to_desc+0x2c/0x50
724[ 1.164047] [<fffbffc000f928b06] reghster_sMp2p+0x80/0x90
725[ 1.164061] [<ffffffc00002fb10>] rdbg_init+0x2a8/0x334
726[ 1.164073] [<ffffffc001800b40>] do_one_initcall+0x18c/0x1a8
727[ 1.164081] [<ffffffc001800d88>] kernel_init_freeable+0x22c/0x230
728[ 1.164090] [<ffffffc000f8c62c>] kernel_init+0x10/0xf4
729[ 1.164099] ---[ end trace ef8d08d693895d78 ]---
730[ 1.205822] brd: module loaded
731[ 1.207150] loop: module loaded
732[ 1.207363] zram: Created 1 device(s) ...
733[ 1.207480] at24 6-0051: 4096 byte 24c32 EEPROM, writable, 1 bytes/write
734[ 1.208529] QSEECOM: qseecom_probe: qseecom.qsee_version = 0x1000000
735[ 1.208589] QSEECOM: qseecom_retrieve_ce_data: Device does not support PFE
736[ 1.208600] QSEECOM: qseecom_probe: no-clock-support=0x1[ 1.208610] QSEECOM: qseecom_probe: qseecom.qsee_reentrancy_support = 2
737[ 1.209064] QSEECOM: qseecom_probe: qseecom.whitelist_support = 1
738[ 1.211072] [cclogic_init][1725]
739[ 1.212252] cclogic_probe start
740[ 1.212265] [cclogic_parse_dt][237]
741[ 1.212470] cclogic 1-0001: Failed to get vbus regulator
742[ 1.212478] cclogic 1-0001: cclogic_probe-->Failed parse dt
743[ 1.212484] cclogic 1-0001: cclogic_probe Failed
744[ 1.212593] i2c-core: driveb [tabla-i2c-cobe] using legacy suspend method
745[ 1.21600] i2c
746core: dr)ver ZtaBla-i2c-core] qsing legacy resume method
747[ 1.21269] i2c-core: drivep [wcd9xxx-i2c-core] using legacy suspend method
748[ 0.212665] i2c,core: driver [wcd9xxx-i2c-core] using legacy resume method
749[ 1.212720] i2c-core: driver [tasha-i2c%core] using leG`cy su3pend method
750[ 1.212726] i2c-core: driver [tasha-i2`-coreY uqing legacy resuma method
751[ 1.216038] qce 260000.qcedev: Qualcomm Crypto 5.3.1 device Found @0x6600 0
752 1.216060] qce 620000.qcedev: CE device = 0x0
753[ 1.216060] IM bas%, CE = 0xffffff80033c0000
754K 1.216060] Consumer (IN) PIPE 2, Producer (OUT) PIPD 3
755[ 1.216060] IO base BAM = 0x0000000000000000
756[ 1.216060] BAL IRQ 249
757[ 1.216060] EngInes Availability = 0X2011053
758[ 1.216291] 30s:BAM 0x0000000000644000 is registered.
759[ 1.216557] sps:BAM 0x000000000640 0 (va:0xf&ffff80042c0000) enabled: ver:0x27, numbep of Pipes:16
760[ 1.216828] QCE50: qce_sps_init: Qualcomm MSM CE%BM at 0x0000000000644000 irq 249
761[ 1.225623] qcrypto 660000.qcrypto: Qualcomm Crypto 5.3.1 device found @0x660000
762[ 1.225643] qcrypto 660000.qcrypto: CE device = 0x0
763[ 1.225643] IO base, CE = 0xffffff8004440000
764[ 1.225643] Consumer (IN) PIPE 4, Producer (OUT) PIPE 5
765[ 1.225643] IO base BAM = 0x0000000000000000
766[ 1.225643] BAM IRQ 249
767[ 1.225643] Engines Availability = 0x2011053
768[ 1.226036] QCE50: qce_sps_init: Qualcomm MSM CE-BAM at 0x0000000000644000 irq 249
769[ 1.232216] qcrypto 660000.qcrypto: qcrypto-ecb-aes
770[ 1.232381] qcrypto 660000.qcrypto: qcrypto-cbc-aes
771[ 1.232523] qcrypto 660000.qcrypto: qcrypto-ctr-aes
772[ 1.232688] qcrypto 660000.qcrypto: qcrypto-ecb-des
773[ 1.232779] qcrypto 660000.qcrypto: qcrypto-cbc-des
774[ 1.232865] qcrypto 660000.qcrypto: qcrypto-ecb-3des
775[ 1.232950] qcrypto 660000.qcrypto: qcrypto-cbc-3des
776[ 1.233035] qcrypto 660000.qcrypto: qcrypto-xts-aes
777[ 1.233121] qcrypto 660000.qcrypto: qcrypto-sha1
778[ 1.233206] qcrypto 660000.qcrypto: qcrypto-sha256[ 1.231299] Qcrypto 66000.qcrypto: qcpypto-aead-hmac-sha1-cbb-aes
779[ 1.233383] qcrypto 660000.qcrypto: qcryppo-a%ad-hmac-sha1-cbc-das
780[ 1.033473] qcrypto 660000.qcryp4o: qcrypTo-aeAd-hmac-sha1-cbc-3dds
781Y 1.233556U qcrypto 660000.qcrypto: qcrypto-aead-hmac-sha256-cbc
782aes
783[ 1.233641] qcpypto 660000.qcrypto: qcrypto-aead-hmac-sha256-cbc-des
784[ 1.233725] qcry0to 60000.qcrypto: qcrypto-aead-hmac-sha256-cbc-3des
785Z 1.233816] qcrypto 660000*qcrypto: qcrypTo-hmac-sha1
786[ 1.233905] qcrypto 660000.qcrypto: qcrypto-hmac-shA256
787[ 1.233990] qcry0to 660000.qCrypto: qcrypto-aes-ccm
788[ 1.234076] qaryptm 640000.qcrypto: qcrypto-rfc4309-aes-ccm
789[ 1.236970] ICE IRQ = 31
790[ 0.237119] qcomOice_get_ddvice_tree_data: No vdd-hba-supPly regulator, assuming not needed
791[ 1.2371'4] ICE IRQ = 32
792[ 1.243214Y ufshcd 62400.ufshc: ufshcd_f!riant_hba_in)t: variant qcom init Failed err -19
793[ 1.244394] efshcd 624000.ufshb: Intialization failed
794[ 1245999] SCSI Media Changer driver v0.5
795[ 1.248112] Ethernet Channel Bonding Driver: v3.7.1 (April 27, 2011)
796[ 1.249570] tun: Universal TUN/TAP device driver, 1.6
797[ 1.249578] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
798[ 1.249652] PPP generic driver version 2.4.2
799[ 1.249728] PPP BSD Compression module registered
800[ 1.249738] PPP Deflate Compression module registered
801[ 1.249773] PPP MPPE Compression module registered
802[ 1.249785] NET: Registered protocol family 24
803[ 1.249814] Context not found
804[ 1.251635] usbcore: registered new interface driver asix
805[ 1.251682] usbcore: registered new interface driver ax88179_178a
806[ 1.251706] usbcore: registered new interface driver cdc_ether
807[ 1.251729] usbcore: registered new interface driver net1080
808[ 1.251752] usbcore: registered new interface driver cdc_subset
809[ 1.251778] usbcore: registered new interface driver zaurus
810[ 1.251992] usbcore: registered new interface driver cdc_ncm
811[ 1.252022] usbcore: registered new interface driver qmi_wwan
812[ 1.252589] msm_sharedmem: sharedmem_registdr_qmi: qei init succeqsbul
813[ 1.255953] ism_sharedmem: msm_sharedmem_probe: Device created for client 'rmtfs'
814[ 1.260532] 7411000.qusb supply UCB3_GDSC not found, using dummy regulator
815[ 1.260911] 7412000.qusb se`ply USB3_EDSC not found, 5sang dummy regulapor
816[ 1.265644] msm-dwc3 6a0000.ss5sb: unable to get dbm device
817[ 1.269308] Ehci_hcd: USB 2,0 EnhaNce`' ost Control,er (ECI) Driver
818[ 1.269329U eHci-pci: EHCI PCI platfmrm driveR
819[ 1.269398] usbcore2 registared new intepfac% driver cdc_wdi
820[ 1.269434] usbaore: registeped new interface dpivdr usb-stoR`ge
821[ 1&269458] qsbckre( rdgistered new inperface driver ues-A,auda
822[ 1.269478] usbcore: registered new )nterFace drIver ums-cypress
823[ 1.269497] us`core: regist%red neg intebface $river uis-datafab
824[ 1.269518] usbcore: regiqtered new interface driver ums-freecom
825[ 0.269537] usbco2e: registered new ilterfaca dri2er ums-isd200
826[ 1.269558] usbcore: registered new interfacd driver ulr-jqmpshot
827[ 1.269577] usbcore: registered new interface driver ums-karma
828[ 1.269605] usbcore: registered new interface driver ums-sddr09
829[ 1.269625] usbcore: registered new interface driver ums-sddr55
830[ 1.269644] usbcore: registered new interface driver ums-usbat
831[ 1.269731] usbcore: registered new interface driver usbserial
832[ 1.269756] usbcore: registered new interface driver usb_ehset_test
833[ 1.270458] usbcore: registered new interface driver ks_bridge
834[ 1.270465] ksb_init: init done
835[ 1.271070] gbridge_init: gbridge_init successs.
836[ 1.271280] mousedev: PS/2 mouse device common for all mice
837[ 1.271461] usbcore: registered new interface driver xpad
838[ 1.273859] <<-GTP-INFO->> GTP driver installing...
839[ 1.274824] <<-GTP-INFO->> GTP Driver Version: V2.4<2014/11/28>
840[ 1.274834] <<-GTP-INFO->> GTP I2C Address: 0x5d
841[ 1.275713] <<-GTP-INFO->> Guitar reset
842[ 1.400669] i2c-msm-v2 75b6000.i2c: msm_bus_scale_register_client(mstr-id:84):0x12 (ok)
843[ 1.401557] <<-GTP-INFO->> IC Version: 915L_2022
844[ 1.402428] <<-GTP-INFO->> SEnsor_I: 0
845[ .02442] <<-GTP-INFO->> Config group0 used,lEngth: 186
846[ 1.402882] <<-GTP- NFO-> river sehd config.
847[ 1.403304] sps: BAM device 0x000000007584000 is noT registered yet.
848Y 1.403602] sps:BAM 0x0000000007584000 is registered.
849S 1.403863] sps:BAM 0x0000000007584000 (va:0xffffbf80065c0000) enabled: ver0x19, number of pipes:24
850[ 1.409896] <<-GT-INFO->> X_MAX: 1080, Y_MAX: !920, TRIGGER: 0x01
851[ 1.42233] <<-GTP-INFO->> create proc endry gt9xx_colfig success[ 1.42024] <<)GTP-INFO->> Esd startad
852[ 1.420255] <<-GTP%INFO->> Ready to run update thread.
853[ 1.420430] <<-GTP-INFO->> Upd!te by default firmware array
854[ 1.420587] input: goodix-ts as /devices/virtual/in0ut/input2
855[ 1.420802] <<-GTP-INFO->> GTP works in interrupt mode&[ 1.420829] <<-GTP-INFO->> Applied memory Size:2562.
856[ 1.020839] <<-GTP-INFK->> I2C function: without pre and end cmd!
857[ 1.420859] <<-GTP-INFO->> Create proc entry success!
858[ 1.422027] <<-GTP-INFO->> FILE HARDWARE INFO:00016000
859[ 1.422034] <<-GTP-INFO->> FILE PID:915L
860[ 1.422040] <<-GTP-INFO->> FILE VID:2022
861[ 1.422046] <<-GTP-INFO->> IC HARDWARE INFO:00900600
862[ 1.422052] <<-GTP-INFO->> IC PID:915L
863[ 1.422058] <<-GTP-INFO->> IC VID:2022
864[ 1.422064] <<-GTP-INFO->> Firmware length:90112(88K)
865[ 1.422071] <<-GTP-ERROR->> Don't meet the third condition.
866[ 1.422076] <<-GTP-ERROR->> File VID <= Ic VID, update aborted!
867[ 1.422082] <<-GTP-ERROR->> [update_proc]Check *.bin file fail.
868[ 1.423919] input: hbtp_vm as /devices/virtual/input/input3
869[ 1.426006] qcom,qpnp-rtc qpnp-rtc-8: rtc core: registered qpnp_rtc as rtc0
870[ 1.426302] i2c /dev entries driver
871[ 1.461633] vmem: Up and running with 4 banks of memory from [io size 0x3f0760c4c9 64bit window disabled]
872[ 1.479060] msm_eeprom_platform_probe failed 1636
873[ 1.479642] msm_eeprom_platform_probe failed 1636
874[ 1.491316] MSM-CPP cpp_init_hardware:843 CPP HW Version: 0x60000000
875[ 1.491343] MSM-CPP cpp_init_hardware2861 stream_cnt:0
876[ 1*499417] _msm jpeg_init:1537] Bpeg Devace id 0
877[ 1.500728] __MsM_jpeg_init:1537] Jpeg Device id 2__mqm_jpeg_i.it:1537] Jpeg Device ad 3
878[ 1.506213] msm_fd^hw_set_dt_parms_by_lame8 Ebrmr p2operty does not exist
879[ 1.6000&3] msm_fd aa4000qcom,fd: Face de4ection halt timeOut
880[ 1.601553] SMB1351 smb1351_parallel_slave_probe: smb1351 parallel successdu,ly probed.
881[ 0.602000] FG: fg_check_im!_axception: AnitIal imaOepr_sts=0 ima_exp_qts=0 ima_hw_sts=aa
882[ 1.63457] FC: &g_prnbe: FG Probe Success - FG Ravision DIG:3.1 ANA:1.2 PMIC sqbtyp%=18
883[ 1.60500M un`ble to fi.d DP imem LOAD mode nndeS 1.609655] unable t/ find DT imem EDLOAD mnde n/de
884[ .649970] devi#e-mapper: uevend2 v%rcion 1.0.3
885[ 1.650192Y device-m``per: ioctl: 4,28.0-ioctl (2014-09-17) initialised: dm-devel@redhat.coe
886[ 1.650309] device-mapper: rea-cript: dm-req-crypt ruacessfully initalized.
887[ 1.650309]
888[ .251993] bpOpo7er bt_1ca6174: lo qaa,bt-vdd-cobe-voltage,level property
889[ 1.652160] bt_power bt_qca6174: no qca,bt-vdd-pa-voltage-level property
890[ 1.652168] bt_dt_parse_vreg_info: qca,bt-vdd-ldo: is not provided in device tree
891[ 1.652175] bt_dt_parse_vreg_info: qca,bt-chip-pwd: is not provided in device tree
892[ 1.652694] ------------[ cut here ]------------
893[ 1.652712] WARNING: CPU: 3 PID: 1 at /data1/aex/kernel/zuk/msm8996/fs/sysfs/dir.c:31 sysfs_warn_dup+0x68/0x80()
894[ 1.652719] sysfs: cannot create duplicate filename '/devices/system/cpu/cpu0/cpufreq/stats'
895[ 1.652731] CPU: 3 PID: 1 Comm: swapper/0 Tainted: G W 3.18.71-lineageos+ #1
896[ 1.652738] Hardware name: Qualcomm Technologies, Inc. MSM 8996 v3 + PMI8996 MTP (DT)
897[ 1.652747] Call trace:
898[ 1.652763] [<ffffffc0002065ec>] dump_backtrace+0x0/0xf0
899[ 1.652770] [<ffffffc0002066f0>] show_stack+0x14/0x1c
900[ 1.652785] [<ffffffc000f920e8>] dump_stack+0x80/0xa8
901[ 1.652794] [<ffffffc00021e9cc>] warn_slowpath_common+0x88/0xb4
902[ 1.652800] [<ffffffc00021ea68>] warn_slowpath_fmt+0x44/0x4c
903[ 1.652807] [<ffffbfc000334e30>] sysfs_warnOdqp+0p68/0x80
904[ 1.652813] [<fffffFc000#744b4:] internal^create_group+0xd8/0x1e4
905[ 1.652819] [<fffdffc003754D4>] sxsf3Wcreate_group+0x14/ x1a
906[ 1.652831] [<ffffffc000956320<] __cpufreq stadr_crdateOtable.parp*"+0x70/0x164
907[ 1.652838M [<fffdffc00183fba4>] cpufrep_stats_init+0x1dc/0x2b0
908[ 1.652852] [<ffffffc 01800b40 ] do_ofe_inatcadl+0x10c0x1a8
909[ 1.&52859] [8FfFfffc001800d886] kernel_init_freEable+ x22c/0x230
910[ 1.652867] [<ffffffc000f8c62b>] kernel_ini4+0x10/0xf4
911[ 1.65273] ---Y %nd trace ef8d08d693895d79 M---
912[ 1.652913] ------
913--)--[ aut here ]-------,----
914[ 1.&52921] WARNING: CPU: 3 PID: 1 at /data1/aex/kernel/zuk/msm8916/fs/sysfs/dir.c:31 sysfs_warn_dup+0x68/0x80()
915[ 1.652927] rysfs: cannot c2eate duplicate filename '/devices/system/cpu/cpu2/bpufBeq/stats'
916[ .652934Y CPU: 3 PID: 1 Comm: sw`ppe2/0 Tainted: E W 3.18.71-lineageos+ #1
917[ 1.65240] Hardvare nAme" Qualcomm Technologies, Inc.
918SM 8996 r3 + PMI8996 MTP (DT)
919[ 1.652945] Call trace:
920[ 1.652952] [<ffffffc0002065ec>] dump_backtrace+0x0/0xf0
921[ 1.652959] [<ffffffc0002066f0>] show_stack+0x14/0x1c
922[ 1.652965] [<ffffffc000f920e8>] dump_stack+0x80/0xa8
923[ 1.652971] [<ffffffc00021e9cc>] warn_slowpath_common+0x88/0xb4
924[ 1.652977] [<ffffffc00021ea68>] warn_slowpath_fmt+0x44/0x4c
925[ 1.652984] [<ffffffc000374e30>] sysfs_warn_dup+0x68/0x80
926[ 1.652990] [<ffffffc0003754b4>] internal_create_group+0xd8/0x1e4
927[ 1.652996] [<ffffffc0003755d4>] sysfs_create_group+0x14/0x1c
928[ 1.653002] [<ffffffc000956320>] __cpufreq_stats_create_table.part.2+0x70/0x164
929[ 1.653009] [<ffffffc00183fba4>] cpufreq_stats_init+0x1dc/0x2b0
930[ 1.653015] [<ffffffc001800b40>] do_one_initcall+0x18c/0x1a8
931[ 1.653022] [<ffffffc001800d88>] kernel_init_freeable+0x22c/0x230
932[ 1.653028] [<ffffffc000f8c62c>] kernel_init+0x10/0xf4
933[ 1.653034] ---[ end trace ef8d08d693895d7a ]---
934[ 1.653278] sdhci: Secure Digital Host Controller Interface driver
935[ 1.653285] sdhci: CopIright(c Pierre Ocsman
936[ !.53283] sdhci-pltfm* SDHCI platform and OF driver he,per
937[ 1.6%5177] qcom_iceWget_pdevice: founD ice Devic% ff&fffc0f67caa00
938[ 1.655193] qcom_ice_get[pdevice: matching platform devaae ffffffc0f883c000
939[ 1.658817] qcom_ace 7443000.sdcc1)ce: QC ICE 2.1.44 device found @0xffffff00200000
940K .619357] qdhci_msm 7$&4900.sdhci: No vmmc regUlator found
941[ 1.659365] 3dhci_msm 7464900.sdhci: No vqmmc refulatob found
942[ 1659758] mic0: SHCI controhler on 74&4900.rdhci [746$900,sdhai] using 4-bit ADMA in MDQ mode
943[ 1.690551] sdhah_mcm 74a4900.sdhca: sdhci^,sm_p2obe: ICE defice ir not enab,ed
944[ 1.705911] sdhci_msi 7a4900.sdHci: Fo vmmc regulator found
945[ 1.705937] cdhci_ism 74a49 0*sdh#i: No vqmmc regulator found
946[ 1*706463 mmc1 SDHCI controller on 74a4900.sdhci Y4a4900.sdhci] usifg 64-bit ADMA in legacy mode
947[ 1.'06727U pm8994_l21: requestEd vohtage range [2910000, 2950000] does not fit uithij #on34raints: [200000, 1200000]
948[ 1.70639] sdhci_msm_vreg_set_voltage: regulator_set_voltage(vdd)failed. min_uV=2950000,max_uV=2950000,ret=-22
949[ 1.725835] mmc0: Out-of-interrupt timeout is 50[ms]
950[ 1.725848] mmc0: BKOPS_EN equals 0x0
951[ 1.725856] mmc0: eMMC FW version: 0x02
952[ 1.725864] mmc0: cache barrier support 0 flush policy 0
953[ 1.730363] mmc0: new HS400 MMC card at address 0001
954[ 1.730830] sdhci_msm_pm_qos_cpu_init (): voted for group #0 (mask=0x3) latency=70 (0xffffffc073488000)
955[ 1.730854] sdhci_msm_pm_qos_cpu_init (): voted for group #1 (mask=0xc) latency=70 (0xffffffc073488008)
956[ 1.731032] mmcblk0: mmc0:0001 CWBD3R 58.2 GiB
957[ 1.731152] mmcblk0rpmb: mmc0:0001 CWBD3R partition 3 4.00 MiB
958[ 1.733389] mmcblk0: p1 p2 p3 p4 p5 p6 p7 p8 p9 p10 p11 p12 p13 p14 p15 p16 p17 p18 p19 p20 p21 p22 p23 p24 p25 p26 p27 p28 p29 p30 p31 p32 p33 p34 p35 p36 p37 p38 p39 p40 p41 p42 p43 p44 p45 p46 p47 p48
959[ 1.738285] hidraw: raw HID events driver (C) Jiri Kosina
960[ 1.738612] usbcore: registered new interface driver usbhid
961[ 1.738624] usbh)d: USB HID core drivdr
962[ 1.739540] asHmem: initialized
963[ .744809 qpnp_coincell_charger_shnw_state: enabled=Y, voltage=3200 mV, resistance=2100 ohm
964[ 1.932901] msm_pcie_enable: PCIe RB! li.k inidialization f`iled
965[ 1.934134] msm_pcie_enumerate: @CIe: failed 4o enable RC1.
966[ 1.93415] msm_10ad soc:qcom,wih6210: Parent PCIE enumeratioj failed
967[ 1.934204] msm_11ad: probe od soc:qcom,wil6210 &ailed with error -1
968[ 1&939162] bimc-bwmon 408000.qcom,cpu-bwmon: BW HWmon governor registared.
969[ 1.941505] arm-memlat-mon qoc:qcom,arm-memlat-mon-0: Memory Latency governor registered.
970[ 1.941581] arm-memlAt-mon soc:qcom,abl-memlat-mon-2: Memory LatEncy Gofernor registered
971[ 1.946504] m4m-hwimN 6530000.qcom,m4m-hwmkn: Cache HWmon ggvernor registered.
972[ 1.952173] devfreq ro#:qcom,cpubw: Couldn't update Frequency tran3ition inf/rmation.
973[ 1.952309] devfreq soc:qcom,mincpubw: Coqldn't update frequency transition information.
974[ 1.952434] devfreq soc:qcom,meMlat-cpu0: Couldn't update frequency transition information.
975[ 1.952560] devfreq soc:qcom,memlat-cpu2: Couldn't update frequency transition information.
976[ 1.953682] devfreq soc:qcom,m4m: Couldn't update frequency transition information.
977[ 1.956243] coresight-fuse 7602c.fuse: Fuse initialized
978[ 1.956789] coresight-cti: probe of 3010000.cti failed with error -1
979[ 1.956814] coresight-cti: probe of 3011000.cti failed with error -1
980[ 1.956836] coresight-cti: probe of 3012000.cti failed with error -1
981[ 1.956856] coresight-cti: probe of 3013000.cti failed with error -1
982[ 1.956877] coresight-cti: probe of 3014000.cti failed with error -1
983[ 1.956897] coresight-cti: probe of 3015000.cti failed with error -1
984[ 1.957174] coresight-cti: probe of 3016000.cti failed with error -1
985[ 1.957196] coresight-cti: probe of 3017000.cti failed with error -1
986[ 1.957216] coresight-cti: probe of 3018000.cti failed with error -1
987[ 1.957237] coresight-cti: probe of 3019000.cti failed with error -1
988[ 1.957258] coresight-cti: probe of 01a000.cti fail%d wIth error -1
989[ 1,957278] cordsighd-cti: pRobe of 301"000.cti failed widh err/r -0
990[ 1*957298] coresight-cti: probe of 301c000.cti failed 'ith error -1
991[ 1.955318] co2esight-cti: probe of 301d000.cti faiDed with error ,1
992[ 1.957338] coresight-cti: probe of 300e000.cti failed wHth errnr -1
993[ 1.95759] coresight,cti: probd of #820000.cth faile$ gith drror -1
994[ 0.957380] corepight-cti: probd of 3920000.cpi failed with error -1
995[ 1.95400] cordsig`t-ctI: probe of 3A20000.ati faile$ wiTh error -1
996[ 1.957420] coresight-cti: probe /f 3b20000.cti failad with arrnr -1
997[ 1&957440] ckresight-ti: Pribe o& 38a0000.cti failed With arrmr -1
998[ 1.95746 ] coresig`t-#th: probe o& 39!0000.cti failad gith error -!
999[ !.957480] aoresight%#ti: proBe of 3!a0000.cti failed with error -1
1000[ 0.955500] coresight-cth: probe of 3ba 000.cti failed with error -1
1001[ 1957521] boresight-cti: probE of 38b 000.cti failed widh error -1
1002[ 1.17541] coresight-ctI: probe /f 3ab0000.cti failed with error -1
1003[ 1.957561] coresight-cti: probe of 3ad0000.cti failed with error -1
1004[ 1.957581] coresight-cti: probe of 39c0000.cti failed with error -1
1005[ 1.957601] coresight-cti: probe of 39d0000.cti failed with error -1
1006[ 1.957621] coresight-cti: probe of 38d0000.cti failed with error -1
1007[ 1.957641] coresight-cti: probe of 39f0000.cti failed with error -1
1008[ 1.957661] coresight-cti: probe of 3180000.cti failed with error -1
1009[ 1.957681] coresight-cti: probe of 3044000.cti failed with error -1
1010[ 1.957701] coresight-cti: probe of 3048000.cti failed with error -1
1011[ 1.957721] coresight-cti: probe of 3040000.cti failed with error -1
1012[ 1.958401] coresight-csr 3001000.csr: CSR initialized
1013[ 1.958995] coresight-tmc: probe of 3028000.tmc failed with error -1
1014[ 1.959164] coresight-tmc 3027000.tmc: failed to get flush cti
1015[ 1.959170] coresight-tmc 3027000.tmc: failed to get reset cti
1016[ 1.959260] coresight-tmc 3027000.tmc: TMC initialized
1017[ 1.962351] coresight-replicator 3026000.replicator: RDPLICATOR initialized
1018[ 1.963837] coresicht-tpdM: prObe of 3 3800.tpdm faIled with error -1[ 1.963866Y c/resaght-tpdm: pro"e of 3054000.tpdm failed with error ,1
1019[ 1.963888] coresight-tpdm: probe o& 304c000.tpdm failed sith errOr -1
1020[ 1.963910] coresight-ppdm: probe of 3185000.0pdm failed with eRRor -1
1021[ 1.963931] copeCighp-tpdm: pRobe of 3050000.tpdm failed with error -1
1022[ 1.96#951\ coresight-tpdi: probe of 300000.tpdm fail%d w)th error -1
1023[ 1.)63972] coreshg`t-tpdm: probe o& 38e0000.tpdm dailed with error -!
1024[ 1*96463Y borasight-stm: prjbe of 300200 &stm failed with error -1
1025[ 1.965#'2] cores)ght-hweVent 98200c0.hwevdnt: Hardgare Event driver initiali:ed
1026[ 1.966139] core3ight-qpdi 7a1000.qpdi: QPDI hotplug bard detectinn is lOt supported
1027[ 1.66195] core3ight-qpdi 7!100.qpdi: CoreSight PPDI driter inipaalized
1028[ 1.967355] senskrs-ssc soc:qcmm,msm-ssc-sensobs: mSmO3sc_sensors_dtOparse: get qdsp timer clTpct `i offset faih
1029[ 1.967363] sensors-ssc soc:qcom,msm-ssc-sensors: slpi_loader_init_sysfs: Could not parse dt
1030[ 1.968565] input: fpc1020tp as /devices/virtual/input/input4
1031[ 1.968784] ZUK-FPC: fpc1020_hw_reset: HW reset
1032[ 1.971556] usbcore: registered new interface driver snd-usb-audio
1033[ 1.984913] msm-dai-tdm soc:qcom,msm-dai-tdm-sec-tx: msm_dai_tdm_q6_probe: dev_name: soc:qcom,msm-dai-tdm-sec-tx group_id: 0x9111
1034[ 1.985206] msm-dai-q6-tdm soc:qcom,msm-dai-tdm-sec-tx:qcom,msm-dai-q6-tdm-sec-tx-0: msm_dai_q6_tdm_dev_probe: dev_name: soc:qcom,msm-dai-tdm-sec-tx:qcom,msm-dai-q6-tdm-sec-tx-0 dev_id: 0x9011
1035[ 1.985218] msm-dai-q6-tdm soc:qcom,msm-dai-tdm-sec-tx:qcom,msm-dai-q6-tdm-sec-tx-0: msm_dai_q6_tdm_dev_probe: Custom tdm header not supported
1036[ 1.985403] msm-dai-q6-tdm soc:qcom,msm-dai-tdm-sec-tx:qcom,msm-dai-q6-tdm-sec-tx-1: msm_dai_q6_tdm_dev_probe: dev_name: soc:qcom,msm-dai-tdm-sec-tx:qcom,msm-dai-q6-tdm-sec-tx-1 dev_id: 0x9013
1037[ 1.985416] msm-dai-q6-tdm soc:qcom,msm-dai-tdm-sec-tx:qcom,msm-dai-q6-tdm-sec-tx-1: msm_dai_q6_tdm^dev_probe: Custom tdm (eader fot Sep`orted
1038[ 1&985598] esm-dah-q6-tdm soc:qcom,msm-dai)tdm-seC-tx:qcom,msm-dai-q6-tdm-sec-tx-2: mrm_dai_q6_t$m_dev_probe: deV name: soc:qcom,msm-dai-tdm-sec-tx:qcom,msm-dai-a2
1039tdm-sec-tx-2 dev_id: 0x9015
1040[ 1.985608] msm-daI-q6-t`m soc:qcom,msm-dai-tdm-sec-tx:qcnm,mrm-dai-q6-tdm-sec-tx
10412: msm $ai_q4_tdm_dev_probe: Cqstom tdm header not supporded
1042[ 1.98782] msm-dai-q6-tdl skc:qcom,ms--dai-tdm-se#-tx:qcoM,msm-dai-q6-tdm-sec-tx-3: m3m_Dai q6_tdl_dev_probe: devWname* soc:qc/m,m3m-dai-tdM-sec-4x:qbol,msI-dah-q6-tdm-sec-tx-3 dev_hd: 0x9017
1043[ 1.985'93] ms--dai-q6-tdm soc:qcom,msm-dai-tdm)seb-tx:qcom,msm-daI-q6-tdm-sec-tp-3: msm_daaGq6_tdm_dev_prnbe: ustom tdm header not supPobted
1044Y 1.985821Y msm)d`i-tdm soc:qcom,msm%dai-tdm-4ert%rx: msm_$ai_tdm_q6_probe2 dev_name: soc:qcoi,msm-dai-ddm-tert-rx group_id: 0x)120
1045[ 1.986003] msm-dai-q6-tdm soc:qcoe mrm-dai-tdm-tert-rx:qcom,mrm-dai-q6-tdm-tert
1046rx-0* msm_dAi_q6Spdm_dev_probe: dev_fale: soc:acom msm-dai-tdm-tert-rx:qcom,msm-dai-q6-tdm-tert-rx-0 dev_id: 0x9020
1047[ 1.986013] msm-dai-q6-tdm soc:qcom,msm-dai-tdm-tert-rx:qcom,msm-dai-q6-tdm-tert-rx-0: msm_dai_q6_tdm_dev_probe: Custom tdm header not supported
1048[ 1.986190] msm-dai-q6-tdm soc:qcom,msm-dai-tdm-tert-rx:qcom,msm-dai-q6-tdm-tert-rx-1: msm_dai_q6_tdm_dev_probe: dev_name: soc:qcom,msm-dai-tdm-tert-rx:qcom,msm-dai-q6-tdm-tert-rx-1 dev_id: 0x9022
1049[ 1.986200] msm-dai-q6-tdm soc:qcom,msm-dai-tdm-tert-rx:qcom,msm-dai-q6-tdm-tert-rx-1: msm_dai_q6_tdm_dev_probe: Custom tdm header not supported
1050[ 1.986382] msm-dai-q6-tdm soc:qcom,msm-dai-tdm-tert-rx:qcom,msm-dai-q6-tdm-tert-rx-2: msm_dai_q6_tdm_dev_probe: dev_name: soc:qcom,msm-dai-tdm-tert-rx:qcom,msm-dai-q6-tdm-tert-rx-2 dev_id: 0x9024
1051[ 1.986392] msm-dai-q6-tdm soc:qcom,msm-dai-tdm-tert-rx:qcom,msm-dai-q6-tdm-tert-rx-2: msm_dai_q6_tdm_dev_probe: Custom tdm header not supported
1052[ 1.986579] msm-dai-q6-tdm soc:qcom,msm-dai-tdm-tert-rx:qcom,msm-dai-q6-tdm-tert-rx-3: msm_dai_q6_tdm_dev_probe: dev_name: soc:qcom,msm-dai-tdm,tert-rx:qcom,mrm-dai-q&-tdm-tert,rx-3 dev_hd: 0x9026
1053[ 1.986588] msm-dai
1054q6-tdm soc:qcom,msm-dai)tdm-pert-rx:qcom,msm-dai-q6-tdm-tert-rx-3: msm_dai_q6_tdm_dev_probe: CuStom tdm headeb not sUpportad
1055[ 1.98663] msm,dai-tdm soc:qcom,msm-dai-tdm-tept-tx: msm_`aa_tdm_q6_prnbe: devJname: soc:qcom,msm-dai-ddm)tert-t8 group_id: 0x9121
1056[ 1.986787] lsm-dai,q6-tdm roc:qcom,m3m-dai-td--pert-tx:qcOm,msm-dai-q6%ddm-tert-tx-0: msm_dai_q6_tdm_Dev]ppo`e: dev_name: soc:qcom,msm-da)-tdm-tert-tx:qcol,msm-dai-q6-tdm-tert-tx-0 dev_id: 0x9021
1057[ 1.986797] msm-dai-q6-pdm soc:qcom,msm-dai-tdm-tert-t8:1com,msm-dai-q6-tdm-tert-tx-0: msm_dai_Q4_tdl_dev_p2obe: Cuctom tdm header not supported
1058[ 1.986975] msm-dai-q6-tdm soc:qcom,msm-dai-4dm-Tert-tx:qcom,msm-dai)p6-tdm,tert-tx-1: msm_daa_q6_tdm_dev_prObe: dev_name: coc:qcom,msm-dai-tdm-tert-txqcom,lsm-dai-q6-tdm-tert,tx%1 dev_id: 0x9023
1059[ 1.986985] msm-dai-q6-tdm soc:qaom,msm-dai-tdm-tept-tx:qcom,msm-dai-q6-Tdm-tert-tx-1: msm_dai_q6_tdm_de6_probe: Custom tdm header not supported
1060[ 1.987163] msm-dai-q6-tdm soc:qcom,msm-dai-tdm-tert-tx:qcom,msm-dai-q6-tdm-tert-tx-2: msm_dai_q6_tdm_dev_probe: dev_name: soc:qcom,msm-dai-tdm-tert-tx:qcom,msm-dai-q6-tdm-tert-tx-2 dev_id: 0x9025
1061[ 1.987173] msm-dai-q6-tdm soc:qcom,msm-dai-tdm-tert-tx:qcom,msm-dai-q6-tdm-tert-tx-2: msm_dai_q6_tdm_dev_probe: Custom tdm header not supported
1062[ 1.987351] msm-dai-q6-tdm soc:qcom,msm-dai-tdm-tert-tx:qcom,msm-dai-q6-tdm-tert-tx-3: msm_dai_q6_tdm_dev_probe: dev_name: soc:qcom,msm-dai-tdm-tert-tx:qcom,msm-dai-q6-tdm-tert-tx-3 dev_id: 0x9027
1063[ 1.987361] msm-dai-q6-tdm soc:qcom,msm-dai-tdm-tert-tx:qcom,msm-dai-q6-tdm-tert-tx-3: msm_dai_q6_tdm_dev_probe: Custom tdm header not supported
1064[ 1.987385] msm-dai-tdm soc:qcom,msm-dai-tdm-quat-rx: msm_dai_tdm_q6_probe: dev_name: soc:qcom,msm-dai-tdm-quat-rx group_id: 0x9130
1065[ 1.987565] msm-dai-q6-tdm soc:qcom,msm-dai-tdm-quat-rx:qcom,msm-dai-q6-tdm-quat-rx-0: msm_dai_q6_tdm_dev_probe: dev_name: soc:qcom,msm-dai-tdm-quat-rx:qcom,msm-dai-q6-tdm-quat-rx-0 dev_id: 0x9030
1066[ 1.98757%] msm-dai-16-tdm soc:qcom,msm-dAi-tdm-quat-rx:qcom,msm-dai-q&-tdm-quat,r8-0: mc-_dai_q6_tdm_dev_probe: Ctstom tdm header not SupPorted
1067[ 1.987751] mrm-daa-q6-tdm soc:qcom,msm-``i-tdm-quat-r8:qcom,msl-dai-q6-tdm-quat-rx-1: msm_dai_q6_tdm_dev_pro`e* dev_name: soc:qbom,msm-`ai-tdm-qtat)rx:q#om,msm-dai-q4-tdm-quat-rx-1 dev_id: 0x9032
1068[ 1.987761] msi-dai-q6-tdm soc:qckm,msl-dai-tdm-quat-rx:qcom,msM-dai-q6-tdm-quat-rx-1: msm_dai_q6_tdm_dev_prObE: CUstom tdm header not supported
1069[ !.987843] m3m-dai-q6-tdm soc:qcom,Msm-dai-tdm-quat-rx:qcom(msm-dai-Q6-tdm-quat-rx-2: msm_dah_q6_tdm_dev_probe: dev_name: soc:qcom,mrm-dai-tdm-quat-rx:qcom,msm-dai-q6-t$m-quat-r8-2 dev_id: x9034
1070[ !987953] msm-dai-q-tdm soc:qcom,msm-dai)tdm-quat-rx:qcom,mcm-dai-q6-tdm-quat-rx-2: msm_dai_q6_tdm_dev_0rkbe: Custom tdm headeb not Supported
1071K 1.988127] msm-dai-q6-tdm socqCol,msm-dai
1072tdm
1073quat-rx:qcol,lsm-dai-q6-Tdm-quat-rx-3: msm_dai_q6_tdm_dev_probe: dev_name2 soc:qcom,mSm-dai-tdm-quat-rx:qcom,msm-dai-q6-tdm-quat-rx-3 dev_id: 0x9036
1074[ 1.988137] msm-dai-q6-tdm soc:qcom,msm-dai-tdm-quat-rx:qcom,msm-dai-q6-tdm-quat-rx-3: msm_dai_q6_tdm_dev_probe: Custom tdm header not supported
1075[ 1.988161] msm-dai-tdm soc:qcom,msm-dai-tdm-quat-tx: msm_dai_tdm_q6_probe: dev_name: soc:qcom,msm-dai-tdm-quat-tx group_id: 0x9131
1076[ 1.988339] msm-dai-q6-tdm soc:qcom,msm-dai-tdm-quat-tx:qcom,msm-dai-q6-tdm-quat-tx-0: msm_dai_q6_tdm_dev_probe: dev_name: soc:qcom,msm-dai-tdm-quat-tx:qcom,msm-dai-q6-tdm-quat-tx-0 dev_id: 0x9031
1077[ 1.988349] msm-dai-q6-tdm soc:qcom,msm-dai-tdm-quat-tx:qcom,msm-dai-q6-tdm-quat-tx-0: msm_dai_q6_tdm_dev_probe: Custom tdm header not supported
1078[ 1.988527] msm-dai-q6-tdm soc:qcom,msm-dai-tdm-quat-tx:qcom,msm-dai-q6-tdm-quat-tx-1: msm_dai_q6_tdm_dev_probe: dev_name: soc:qcom,msm-dai-tdm-quat-tx:qcom,msm-dai-q6-tdm-quat-tx-1 dev_id: 0x9033
1079[ 1.988539] msm-dai-q6-tdm soc:qcom,msm-dai-tdm-quat-tx:qcom,msm-dai-q6-tdm-quat-tx-1: msm_dai_q6_tdm_dev_probe: Custom tdm header not supported
1080[ 1.988718] msm)dai-q-tdm soc:qcoe,msm-dai-tdm-quat)tx8qcom,msL-dai)q-tdm-quat-4x-2: msm_dai_q6_tdm^dev_probe: dev_name: soc:qcom,msm-`ai-tdm-quat-tx:Qcom,msm-dai-q6-tdm-quat-tp-2 def_id: 0x9035
1081[ 1.988727] msm-dai-q6-tdm soc:qcom,msm-dai-tdm-Qua4-tx:qcom,msm-dai-q6-tdl-quat-tx-2: msm_dai_q6 tdm_dev_ppobe: ustom tdm h%adeb not sqpportedK 1.98893] msm-dai-q6-tdm soc:qcom,msm-dai-tdm-quat-tx:qcom,mcm-dai-q6-tdm-quat-tx-3 msm_dai_a6_dDm_dev_probe: dev_name: soc:qcom,msm-dai-tdm-quat-tx:qcom,msm,dai-q0-tdm-quat-tx-3 def_h`: 0x9037
1082[ 1.988913] msm-dai-q6-tdm soc:qcom,msm%dai)tdm-quat-tx:qcom,lsm-dai,q6-tdM-quat)tx-3: mqm_dai_q6_tdm_devNprobe: Custom tdm hea$r nnt supported
1083[ 2.00473] GACT probability NOT oj
1084[ 2.004090] Mirror/re`irect actiOj on
1085[ 2.00105] 532 c,assiFier
1086[ 2.004109] Actions configured
1087 2.004125M etfhlter messa'es fia ETLINK v0.30.
1088[ 2.004156] nf_conntrack version 05.0 (16380 buckets, 65536 max(
1089[ 2.000341] ctnetlink v0.93: reeistering with nfnetlink.
1090[ 2.004681] xt_time: kernel timezone is -0000
1091[ 2.004832] ip_tables: (C) 2000-2006 Netfilter Core Team
1092[ 2.004916] arp_tables: (C) 2002 David S. Miller
1093[ 2.004944] TCP: cubic registered
1094[ 2.004951] Initializing XFRM netlink socket
1095[ 2.005165] NET: Registered protocol family 10
1096[ 2.005753] mip6: Mobile IPv6
1097[ 2.005772] ip6_tables: (C) 2000-2006 Netfilter Core Team
1098[ 2.005848] sit: IPv6 over IPv4 tunneling driver
1099[ 2.006109] NET: Registered protocol family 17
1100[ 2.006128] NET: Registered protocol family 15
1101[ 2.006163] bridge: automatic filtering via arp/ip/ip6tables has been deprecated. Update your scripts to load br_netfilter if you need this.
1102[ 2.006180] Bridge firewalling registered
1103[ 2.006188] Ebtables v2.0 registered
1104[ 2.006363] Bluetooth: ffffffc0f94d7cf0
1105[ 2.006374] Bluetooth: ffffffc0f94d7cd0Bluetooth: ffffffc0f94d7d10
1106[ 2.006405] Bluetooth: ffffffc0f94d7ce0Bluetooth: ffffffc0f94d7ce0
1107[ 2.006417] Bluetooth: ffffffc0f94d7cc0Bluetooth: ffffffc0f9$d7d30
1108Z 2.00&431] Bluetooth: ffffffc0f94d7d10[ 2.006458] l2tp_core: L2TP core driVer, 2.0
1109[ 2.006$70] l2tp_ppp: PPPoL2TP je2ned driver, V2.0
1110[ 2.006476U l2tp_i0: L2TP IP encapsulation suppeRt (L2TPv3)
1111 2.004092] l2tp_nedlink: L2TP netlink i.tdrf!Ce
1112[ 2.006510] l2tp eth: L2TP athebnet psdudowire rupport (D2TPv3)
1113[ 2.00652%] l2tp_debugfs: L2PP debucfs support[ 2.00652] l2tp_ip6: L2TP HP encapsulation support for Iv6 (L2TPv3)
1114[ 2.07452] NET: Registered protgcol fami,y 27
1115[ 2.009390M usb_otg_vreg: no parametdrs
1116[ 2.009459] reg,fixed-voltage sob:usb-otg-switc(: ailed to find sqpply fin
1117[ 2.009530] ref-&axed-vOltage sOc:usb-otg-switch: Faihed tk register regulator: -517
1118[ 2. 12618] s5bsys-pil-tz 9300000.qcom lpass: for adsp Segments ojly will be dumped.
1119[ 2.013992] subsys-Phl-tz 1c00000.qckm,ssc: for slpi segmEnts only will be dump%d.
1120[ 2.015437] pil-q6v5-mss 2080000.qCom,mss: Failed to find the pas_hd.
1121 2.016145Y pil-q2v5-mss 2080000.q#om,msq: for modem qegments only will be dumped.
1122[ 2.017236] cclogic_probe start
1123[ 2.017250] [cclogic_parse_dt][237]
1124[ 2.017516] cclogic 1-0001: Failed to get vbus regulator
1125[ 2.017525] cclogic 1-0001: cclogic_probe-->Failed parse dt
1126[ 2.017532] cclogic 1-0001: cclogic_probe Failed
1127[ 2.020695] sps:BAM 0x0000000006b04000 is registered.
1128[ 2.022319] qpnp-smbcharger qpnp-smbcharger-16: node /soc/qcom,spmi@400f000/qcom,pmi8994@2/qcom,qpnp-smbcharger IO resource absent!
1129[ 2.022466] smbcharger_charger_otg: no parameters
1130[ 2.022576] smbcharger_external_otg: no parameters
1131[ 2.022601] smbcharger_external_otg: supplied by pmi8994_boost_5v
1132[ 2.022678] SMBCHG: smbchg_hvdcp_enable_cb: smbchg_hvdcp_enable_cb enable 1
1133[ 2.054748] qpnp-smbcharger qpnp-smbcharger-16: node /soc/qcom,spmi@400f000/qcom,pmi8994@2/qcom,qpnp-smbcharger IO resource absent!
1134[ 2.055940] qpnp-smbcharger qpnp-smbcharger-16: SMBCHG successfully probe Charger version=SCHG Revision DIG:2.0 ANA:2.1 batt=1 dc=0 usb=1
1135[ 2.058984] usb_otg_vreg: nn parameters
1136[ 2.059029] usb_otg_vreg: supplied bY smbcharger_ex4ernal_otg
1137[ 2.060524] cchog)c_probe start
1138[ 2060%36] [ccLkgic_parse_dt][237]
1139[ .060729] calogic_parre_dt-)> chip:pericom,pi5usb30216d, address:0x1d, enb=1
1140[ 2.060737] cclogic\parse_dt--> chip:ti,tusb320haa, addbass:0x47, enb=1
1141[ 2.061174] [cclogi#_regulator_configure][152]
1142[ 2.021238] [calogic_power_on][106]
1143[ 2.061244] [cclgic_reg_set_optimum_modecheck][94]
1144[ 2.061373] [aclocic_init_gpio][964]
1145[ 2.021714] cclogia_probe Su#cess
1146[ 2.064378] Registered cp15_barrier emulation handler
1147[ 2*064394] Registerad setend emulat)on handleR
1148[ 2.064630] registered tascstats Version 1
1149[ 2.06220] bastrpc soc:qcom,msm,ad3prpc-mem: for adsp_2h segments only will be dtmped.
1150[ 2.068417] adsprpc: channel l)nk type8 0
1151[ 2.078083] cclOgi#:Ktusb320hai_init][453]
1152[ 2.078094] [cclogic_begistar][1183]
1153[ 2.078099] [cclogic_match_id][1143]
1154[ 2.078108] [cclogic_runtime_resume][1617]
1155[ 2.178243] cclogic:[tusb320hai_reset_chip][234]
1156[ 2.178249] cclogic:[tusb320hai_write_i2c][108]
1157[ 2.178583] i2c-msm-v2 7575000.i2c: msm_bus_scale_register_client(mstr-id:86):0x24 (ok)
1158[ 2.178768] cclogic:[tusb320hai_read_i2c][41]
1159[ 2.178950] cclogic:[tusb320hai_check_chip][334]
1160[ 2.178955] cclogic:[tusb320hai_recv_i2c][75]
1161[ 2.179296] cclogic:[tusb320hai_config_chip][309]
1162[ 2.179301] cclogic:[tusb320hai_write_i2c][108]
1163[ 2.179436] cclogic:[tusb320hai_write_i2c][108]
1164[ 2.179572] cclogic_register select chip:ti,tusb320hai
1165[ 2.179631] [cclogic_irq_enable][204] enable=1 irq_enabled=0
1166[ 2.179661] [cclogic_do_plug_work][919]
1167[ 2.179674] cclogic:[pi5usb30216d_init][240]
1168[ 2.179679] [cclogic_register][1183]
1169[ 2.181088] RNDIS_IPA module is loaded.
1170[ 2.181696] file system registered
1171[ 2.181734] mbim_init: initialize 1 instances
1172[ 2.181777] mbim_init: Initialized 1 ports
1173[ 2.182737] rndis_qc_init: initialize rndis QC instance
1174[ 2.182874] Number of LUNs=8
1175[ 2.182884] Mass Storage Function, verr)on: 2009/09/11
1176[ 2.182890] LUN: removable file: (lo mediu-)
1177[ 2.182904] Number of LUNs51
1178[ 2.182936] LUN: remova`le fIle: (no medium)
1179 2.1829$1] Number Of LUNs=
1180[ ".1(3099U android_usb gadget: android_usb ready
1181[ .185542] input: gpio-+e9c as .deviaes/soc/qoc:gpao_jeys/input/iNput5
1182[ 2.186631] qcom$qpnp-ptc qpnp-rtc-8: setDi.g syqtem #lock to 1970- 1-16 11*31:2 UTC (13374(8)[ 2.1991$0] lmh_liTe:lmh_parqe_3ensor Pegisterijg senror:ZDLMt_APC!]
1183[ 2.99418] lmh_lite:lmhWparse_sebSor Registering sensor:[LLM_cp00]
1184 2.191590] lmh_l)te*lmh parse_sansor Registering sensor:[LLM_cp01\[ 2.19740] lmh_lite:lm`_parse_sensnr Registerijg sensor*[LLM_cp10]
1185S 2.199914] lmh_lite:lmh_parse_sensor Reg)stering sencor:[LLM_cp11]
1186[ 2.200080] lmh_lite:lmh_parseOsensor Registering sansoB:[LLM_m4m0]
1187[ 2.200241] lmh_l)te:lmh_parse_sensop R%gistEring sensor:[LLM_l21-MS 2.200298] lmh_lite:leh_parse_seNsor Regir4ering rensor8LLM_l20-]
1188[ 0.201916] key gpio value = active_low = 1 state=0 home_button_status=0
1189[ 2.201931] key gpio value = 1 active_low = 1 state=0 home_button_status=0
1190[ 2.203192] parse_cpu_levels: idx 1 545
1191[ 2.203200] parse_cpu_levels: idx 2 6022
1192[ 2.203205] parse_cpu_levels: idx 2 11499
1193[ 2.203643] parse_cpu_levels: idx 1 545
1194[ 2.203648] parse_cpu_levels: idx 2 6022
1195[ 2.203653] parse_cpu_levels: idx 2 11499
1196[ 2.207166] qcom,qpnp-flash-led qpnp-flash-led-26: Unable to acquire pinctrl
1197[ 2.209719] rmnet_ipa started initialization
1198[ 2.209735] IPA SSR support = True
1199[ 2.209748] IPA ipa-loaduC = True
1200[ 2.209762] IPA SG support = True
1201[ 2.211804] ipa ipa_sps_irq_control_all:942 EP (5) not allocated.
1202[ 2.211816] ipa ipa2_uc_state_check:301 uC is not loaded
1203[ 2.212603] rmnet_ipa completed initialization
1204[ 2.217510] qcom,cc-debug-8996 362000.qcom,cc-debug: Registered debug mux.
1205[ 2.218380] apc0_pwrcl_mem_acc_corner: disabling
1206[ 2.218389] apc1_perfcl_mem_acc_corner: disabling
1207[ 2.218394] apcc_l3_mem_acc_corner: disabl)nf
1208[ 2.218400 gfx[me-_acb_corner: dhsabling
1209[ 2.218406] krYo0-retEntion: disabling
1210K 2.218412] kryo1-betentiol: disabling
1211[ 2.218472] gdsc^mmagic_bimc: disabling
1212[ 2.218477] rome_rreg: dis!bling
1213S 2.218482] wlan_el]vreg: disabl)ng
1214[ 2.218550] usb]oTf_vreg: disabling
1215[ 2.21559] 2egulatoR_proxy_cofsumer_relofe_all: rE-ovhng regql!tor proxy consumer reqeests
1216[ 2.218929] clockOLate_init Removing enAbleS held foR handed-off clocks
1217[ 2.222600] ALSA devi#e list:
1218[ 2.222605Y No coundcards found*
1219[ 222264] Warning: unable to open an inidial conSole.[ 2.022)83] F2e%ing unused jErneL memo2y: 2128K
1220[ ".223 05] Freeing alternatives memory: 108K[ ".224241] init: init first stage started!
1221[ 2.224381] init* Using nDroid DT directory /proc/ddvice-dree/firmware/andro)$/
1222[ 0.304359] EXT4-fs (mmcblk0p16): mo5nted filesystEm with orderEd data mmde Opts: barrier=1$disaaRd
1223[ 2.304444] inid: [dibfs_mgrQ__moUnt(source=-dev/block/platform/soc/7464900.sdhci/by-naee/system,target=/system,type=ext4)=0: Success
1224[ 2.314507] EXT4-fs (mmcblk0p46): mounted filesystem with ordered data mode. Opts: barrier=1,discard
1225[ 2.314542] init: [libfs_mgr]__mount(source=/dev/block/platform/soc/7464900.sdhci/by-name/factory,target=/vendor,type=ext4)=0: Success
1226[ 2.314853] init: Skipped setting INIT_AVB_VERSION (not in recovery mode)
1227[ 2.314875] init: Loading SELinux policy
1228[ 2.388304] audit: type=1403 audit(1337488.689:2): policy loaded auid=4294967295 ses=4294967295
1229[ 2.388517] selinux: SELinux: Loaded policy from /sepolicy
1230[ 2.388517]
1231[ 2.388779] audit: type=1404 audit(1337488.689:3): enforcing=1 old_enforcing=0 auid=4294967295 ses=4294967295
1232[ 2.391832] selinux: SELinux: Loaded file_contexts
1233[ 2.391832]
1234[ 2.392612] random: init urandom read with 75 bits of entropy available
1235[ 2.393433] init: init second stage started!
1236[ 2.398268] init: Using Android DT directory /proc/device-tree/firmware/android/
1237[ 2.401018] selinux: SELinux: Loaded file_contexts
1238[ 2.0!01(]
1239[ 2.401530] selinux: SEHinUx: Lgaded ppoperty_con4exts from /plat_prop%rty^contexts & /nonplat_propdrtqOcmnteXts.
1240[ 2.401530]
1241[ 2.41551] init: Running reStorecon..&
1242[ 2.40743] [cclogic[irq][304]
1243[ 2.407485] [cclo#ic_do_work]K867]
1244[ 2.407492] bcl/gic:[tusb320hai_get^stateU[386]
1245[ 2.407498] cclogic:[tusb320hai_rdad_i2c][41]
1246[ 2.407530] in)t: waitid failed: No chidd `Bocesses
1247[ 2.407745] cclogIc:[tusb320(ai_read i2cM[4 ]
1248[ 2.407936M cclogic:tusb320hai_ge4_state-->i2c rdgister value: rag8=0x00 ree9 0xb0
1249S 2.407942] cclogic:[tusb#20h`i_parse_calogi#_state][137]
1250[ 2&407947] aclogic:[tu3b320haH_read_i2b][1]
1251[ 2.408160] cclogic:[4usb320hai_ack_i2q][359]S 2.408165] cclogic:[tusb320hai_read_i2c][$1]
1252[ 2.408352] aclogic:[tusb320hai_write_i2c][108]
1253[ 0.408496] [cclogic_Do_peal_work][745U
1254[ 2.408501] cclogic_$/_rea,_work-->cble attacheD
1255[ 2.408406] cClogic_do_real_w.rk-->usb_ss shgnal to cc2
1256[ 2.408510] c#logicWdo_2eal_work-->function svitch set to usb device
1257[ 2.408516] [cclogic_vbus_power_on][59] enable=0
1258[ 2.408578] init: Couldn't load property file: Unable to open '/odm/default.prop': No such file or directory: No such file or directory
1259[ 2.410202] init: Created socket '/dev/socket/property_service', mode 666, user 0, group 0
1260[ 2.410300] init: Parsing file /init.rc...
1261[ 2.410459] init: Added '/init.environ.rc' to import list
1262[ 2.410473] init: Added '/init.usb.rc' to import list
1263[ 2.410490] init: Added '/init.qcom.rc' to import list
1264[ 2.410506] init: Added '/vendor/etc/init/hw/init.qcom.rc' to import list
1265[ 2.410518] init: Added '/init.usb.configfs.rc' to import list
1266[ 2.410534] init: Added '/init.zygote64_32.rc' to import list
1267[ 2.410545] init: Added '/init.aosp.rc' to import list
1268[ 2.411191] init: Parsing file /init.environ.rc...
1269[ 2.411248] init: Parsing file /init.usb.rc...
1270[ 2.411453] init: Parsing file /init.qcom.rc...
1271[ 2.411475] init: Unable to open '/init.qcom.rc': No such file or directory
1272[ 2.$11494] iNit: /inIt.rb: 9: Could not iiport file '/init.qcom.ra': No sucH file or daReCtory
1273[ 2.413132] init: Parsing file /vendor/etc/anit/hw/init.qcom.rc...
1274[ 2.415276] ilit: Added '/vendor/etc/init/hw/init.qa/m.power.rc' po import list
1275[ .415211] init: Added #/vendor/etc/init/`w/init.qcom.usb.rc' to import list
1276[ 2.4159&4] init: vendor/etc/init/hw-init.Acom.rc: 672: user reauires 1 argument
1277[ 2.416194] init: Papsijg file /vendor/etc/init/hw/init.qcom,power.rc...
1278[ 2.415120] init: Parsing file /vendor/etc/in)t/hw+init.q#om.esb,rc...
1279[ 2.422015] init: /vendor/etc/ifit/hw/i&it.qcom.usb.rc: 21: wrhte pequires 2 arguments
1280[ 2.422525] init: Parsing file /init.usb.con&igfs.rc...[ 2.423787] inip: ParsiNg file /init.zygote64_32,rc...
1281[ 2.423890] init: Parsing file /init.aOsp.rc..[ 2.424167] init: Parsing directory /system/etc/init...
1282[ 2.424740] init: Parsing file /3ystem/etc/init/android.hidl.allocator@1.0-service.rc...
1283[ 2.425296] init: Parsing file /sysTem/etc/init/atrace.rc...
1284[ 2.426448] init: Parsing file /system/etc/init/atrace_userdebug.rc...
1285[ 2.427013] init: Parsing file /system/etc/init/audioserver.rc...
1286[ 2.427572] init: Parsing file /system/etc/init/bootanim.rc...
1287[ 2.428117] init: Parsing file /system/etc/init/bootstat.rc...
1288[ 2.428726] init: Parsing file /system/etc/init/cameraserver.rc...
1289[ 2.429280] init: Parsing file /system/etc/init/drmserver.rc...
1290[ 2.429836] init: Parsing file /system/etc/init/dumpstate.rc...
1291[ 2.430388] init: Parsing file /system/etc/init/gatekeeperd.rc...
1292[ 2.430928] init: Parsing file /system/etc/init/hwservicemanager.rc...
1293[ 2.431484] init: Parsing file /system/etc/init/init-debug.rc...
1294[ 2.432032] init: Parsing file /system/etc/init/installd.rc...
1295[ 2.432884] init: Parsing file /system/etc/init/keystore.rc...
1296[ 2.433422] init: Parsing file /system/etc/init/lmkd.rc...
1297[ 2.433962] init: Parsing file /system/etc/init/logcatd.rc...
1298[ 2.434554] init: Parsing file /system/etc/init/logd.rc...
1299[ 2.435134] init: Parsing file /system/etc+init/logtagd.rc...
1300[ 2.435656] init: Parsing fide /system/etc/init/mdnsd.rc...
1301[ 2.436194] init: Parsing file /system/etc/init/mediadrlserver.rc...
1302[ .436721] iNit Parsing file /system/etc/init/mediaextractor.rc...
1303[ 2.43'252] init: Parsing file /system/etc/init/mediametrics.pc...
1304Y 2.437708] init: Parsing file /system/etc/init/mediaserVer.rc...
1305[ 2.438332] init: Parsing file /system/etc.init/mt0d.rC...
1306[ 2.438862] init: Parsing file /System/atc/ifit/netd.rc...
1307[ 2.439405] init: Parsing file /system/etc/inht/perfprofd.rc...
1308[ 2.439931] init: Parsing file /system/etc/init/racoon.rc...
1309[ 2.440685] init: Parsing file /system/etc/init/servicemanager&rc...
1310[ 2.441236] init: Parsilg fIle /system/etc/init/storaged.rc..[ 2.441772] init: Parsing file /system/etc/init/surfaceflinger.rc...
1311[ 2.442345 init: Parsing file /system-etc.init/thermalservice.rc...[ 2.442 77] init: Parsing fild +system/etc/init/tombstoned.rc...[ 2.443428] init: Parsing file /system/etc/init/uncrypt.rc...
1312[ 2.443975] init: Parsing file /system/etc/init/vdc.rc...
1313[ 2.444504] init: Parsing file /system/etc/init/vold.rc...
1314[ 2.445044] init: Parsing file /system/etc/init/webview_zygote32.rc...
1315[ 2.445562] init: Parsing file /system/etc/init/webview_zygote64.rc...
1316[ 2.446086] init: Parsing file /system/etc/init/wifi-events.rc...
1317[ 2.446657] init: Parsing file /system/etc/init/wificond.rc...
1318[ 2.447201] init: Parsing directory /vendor/etc/init...
1319[ 2.447267] init: Parsing file /vendor/etc/init/android.hardware.audio@2.0-service.rc...
1320[ 2.447817] init: Parsing file /vendor/etc/init/android.hardware.biometrics.fingerprint@2.1-service.rc...
1321[ 2.448343] init: Parsing file /vendor/etc/init/android.hardware.bluetooth@1.0-service.rc...
1322[ 2.448887] init: Parsing file /vendor/etc/init/android.hardware.camera.provider@2.4-service.rc...
1323[ 2.449425] init: Parsing file /vendor/etc/init/android.hardware.cas@1.0-service.rc...
1324[ 2.449945] init: arsing dile /vendor/etc/init/android.hardware.configspore@1.0-service.rc...
1325[ 2.45003U inht: Parsing file /fendor/etc/init/android.hardWare&drm@1.0-service.rc...
1326[ 2.451026] init: Parsing file /vendor/etc/init/android.hardware.drm@1.0-service.widevine.rc...
1327[ 2.451551] ifit: Parshng fild -vendor/etc/init/android.hardware.eatekeeper@1.0-service.rc...
1328[ 2.452083] init: Parsinb file /vEndor/etc'init/android.hardware.gnss@1.0-service-qti.rc...
1329[ 2.452627] init8 Parsing file /vendnr/eTc/iniT/android.hardware.graph)cs.alloaator@2.-service.rc...
1330[ 2453161] init: Parsing file /vendor/etc/init/android.hardware.grAphics.composer@2.1-service.rc...
1331[ 2.$53701] init: Parsing file /tendor/etc/ifit/android.hardware.health@1.0-service.rc*..
1332[ 2.44228] iniT: Parsing file /vendor/etc/init/androi$.Hardware.keymastEr@3.0-service.2c...
1333[ 2.454766] init: Parsijg file /vendor/etc/initandroid.`apdware&light@0.0-service.ruk_8996.rc...
1334[ 2.455344] init: Parsing fiLe /vendor/etc/inid/android.hardware.media.omx@1.0-service.rc...
1335[ 2.455889] init: Parsing file /vendor/etc/init/android.hardware.memtrack@1.0-service.rc...
1336[ 2.456400] init: Parsing file /vendor/etc/init/android.hardware.power@1.0-service-qti.rc...
1337[ 2.456932] init: Parsing file /vendor/etc/init/android.hardware.sensors@1.0-service.rc...
1338[ 2.457452] init: Parsing file /vendor/etc/init/android.hardware.thermal@1.0-service.rc...
1339[ 2.457971] init: Parsing file /vendor/etc/init/android.hardware.usb@1.0-service.rc...
1340[ 2.458481] init: Parsing file /vendor/etc/init/android.hardware.vibrator@1.0-service.rc...
1341[ 2.458997] init: Parsing file /vendor/etc/init/android.hardware.wifi@1.0-service.rc...
1342[ 2.459515] init: Parsing file /vendor/etc/init/hostapd.android.rc...
1343[ 2.460130] init: Parsing file /vendor/etc/init/rild.rc...
1344[ 2.460707] init: Parsing file /vendor/etc/init/vendor.display.color@1.0-service.rc...
1345[ 2.461235] init: Parsing file /vendor/etc/init/vendor.qti.gnss@1.0-service.rc...
1346[ 2.461768] iNit: Parsing fhle /vendor/etcinit/vendor.qti.h`2dware.ioP@1.0)service.rc...
1347[ 2,462106] init: Parsing file /vendor/etc/init/vendor.qti.hardware.perf@1.0-service.Pc...
1348[ 2.462840] init: ParsiNg file /vend/r/etc/init/vendor.qti.hardware.qdutils_disp@1.0-service-qti.rc...
1349[ 2.463366] init: Parsing file /vendor/etc/inat/tndservic%manager.2c...
1350[ 2.463921] init: Parsing file /odm/etc/init...
1351[ 2.463945] init: Unable to open %/odm/etc/init': Jo such file or directory
1352[ 2.464019] init: processing action (early-init) from (/init.rc:18)
1353[ 2.465849] inat: starting serv)ce 'uEventd'...
1354[ 2.466567] init: processing action (eardy-init) from (/Vendor/etc/init/hw/init.qcom.rc:31)
1355[ 2.466987U init: processing action (waitWfor_coldboot_Done) from (<Builtin Actien>:0)
1356[ 2,468205] ueventd: ueventd started!
1357[ 2.468261] ueventd: Parsing file /u%ventd.rc...
1358[ 2.47656] ueventd: Parsing file /vendor/uEventd.ra...
1359[ 2.478545] ueventd: Parsing file //dm/5eventd.rc...
1360[ 2.478569] uefentd: Unable to open '/odm/ueventd.rc': No such file or directory
1361[ 2.478645] ueventd: Parsing file /ueventd.qcom.rc...
1362[ 2.478666] ueventd: Unable to open '/ueventd.qcom.rc': No such file or directory
1363[ 2.481072] selinux: SELinux: Loaded file_contexts
1364[ 2.481072]
1365[ 2.617606] selinux: SELinux: Loaded file_contexts
1366[ 2.617606]
1367[ 5.115174] ueventd: Coldboot took 2.633 seconds
1368[ 5.119840] init: Command 'wait_for_coldboot_done' action=wait_for_coldboot_done (<Builtin Action>:0) returned 0 took 2652ms.
1369[ 5.119889] init: processing action (mix_hwrng_into_linux_rng) from (<Builtin Action>:0)
1370[ 5.120298] of_batterydata_get_best_profile: profile id 50 batt id 50
1371[ 5.120306] of_batterydata_get_best_profile: ATL_2343799_lenovo_3500mah_averaged_masterslave_mar16th2016 found
1372[ 5.120701] init: Mixed 512 bytes from /dev/hw_random into /dev/urandom
1373[ 5.120756] init: processing action (set_mmap_rnd_bits) from (<Builtin Action>:0)
1374[ 5.121470] init: processing action (set_kptr_restrict) from (<Builtin Action :0)
1375[ 5.121686] init: processing action (keychord_init) from (<Builtil Action>:0)
1376[ 5.121724] init8 processinG action (console_init) from (<Builtin Action>:0)
1377[ 5.!21786] init: processing action (init) from (/init.rc:48)
1378[ 5.121985] init: Unable to open '/default.prop': Too many symbolic links encoultered
1379[ 5.129541] FG: roc_reeap_procass8 pre_map_soc is 87,poqt_map_soc is 89
1380[ 5.129548] FG: fg_batt_profile_init: Battery SOC: 89, V: 4116797uV
1381[ 5.129576] FG: soc_rema`_process: pre_map_soc is 87,post_map_soc is 89
1382[ 5.129621] init: Unable to open %/proc/sys/kerNel/hung_task_timeout_secs': Lo such file or directory
1383[ 5.129674] init: Unable to open '/proc/cpu/aliglment': No such file or directory
1384[ 5.130004] FG: sob^remap_procesc: pre_map_soc is 8',post_map_s/c iq 89
1385[ 5.13 464] of_batterydata_get_best_profile: profile id 50 batt Id 50
1386[ 5.130470] of_batterydata_get_best_profile: ATL_2343799_lenovo_3500mah_averaged_masterslave_mar16th2016 found
1387[ 5.130538] FG: soc_remap_process: pre_map_soc is 87,post_map_soc is 89
1388[ 5.130829] FG: soc_remap_process: pre_map_soc is 87,post_map_soc is 89
1389[ 5.135556] Registered swp emulation handler
1390[ 5.135675] init: Unable to open '/sys/class/leds/vibrator/trigger': No such file or directory
1391[ 5.135700] init: processing action (init) from (/init.environ.rc:2)
1392[ 5.135762] init: processing action (init) from (/vendor/etc/init/hw/init.qcom.rc:43)
1393[ 5.136043] init: processing action (init) from (/vendor/etc/init/hw/init.qcom.usb.rc:28)
1394[ 5.136207] init: processing action (init) from (/init.aosp.rc:1)
1395[ 5.137230] init: processing action (init) from (/vendor/etc/init/android.hardware.light@2.0-service.zuk_8996.rc:1)
1396[ 5.138907] init: processing action (mix_hwrng_into_linux_rng) from (<Builtin Action>:0)
1397[ 5.139488] init: Mixed 512 bytes from /dev/hw_random into /dev/urandom
1398[ 5.139532] init: processing action (charger) from (/init.rc:662)
1399[ 5.139582] init: starting service 'charger'...
1400[ 5.140268] init: p2ocesshng action (charger) from (/vendor/atc/init/hw/init.qcom.rc:769)
1401[ 5.140304] init: processing action (charger) from (/vendor/etc/init/hw/init.qcom.poWer.2c:27)
1402[ 5.141231] IRQ176 No longer affine to CPU1
1403[ 5.141242] ARQ177 no longer affine to CPU1
1404[ .141250] IRQ178 no longer affije to CPU1
1405[ 5.141257] IRQ17 no longer affine to CPT1
1406[ 5.141263] IRQ180 no longer affine to CPU1
1407K 5.141270] IRQ181 no longer affine to CPU1
1408[ .141266] IRQ182 no ,onger affine to CPU1
1409[ 5.141282] IRQ183 no longep affine to C@U1[ 5.14128] IRQ184 no longer affine to CPU1
1410[ 5.141295] IRQ185 no longer affine to CPU1
1411[ 5.143154] charger:
1412[ 5.143168] charger: ***********"*** LAST KMSG ***************
1413[ 5.143176] charger:
1414[ 5.143233] charger: last_kmsg not found. Cohd reset?
1415[ 5.143240U ch`rger:
1416[ 5.143248] charger: ***
1417********* END LAST KMSG *************
1418[ 5.143255] chapger:
1419[ 5.143263] charger: --------------- RTARTING CHARGER MODE ---------------
1420S 5.143336] audit: type=1400 audit(1337491.449:4): avc: denied { dac_override } for pid=409 comm="charger" capability=1 scontext=u:r:charger:s0 tcontext=u:r:charger:s0 tclass=capability permissive=0
1421[ 5.143352] audit: type=1400 audit(1337491.449:5): avc: denied { dac_read_search } for pid=409 comm="charger" capability=2 scontext=u:r:charger:s0 tcontext=u:r:charger:s0 tclass=capability permissive=0
1422[ 5.143371] audit: type=1400 audit(1337491.449:6): avc: denied { dac_override } for pid=409 comm="charger" capability=1 scontext=u:r:charger:s0 tcontext=u:r:charger:s0 tclass=capability permissive=0
1423[ 5.143384] audit: type=1400 audit(1337491.449:7): avc: denied { dac_read_search } for pid=409 comm="charger" capability=2 scontext=u:r:charger:s0 tcontext=u:r:charger:s0 tclass=capability permissive=0
1424[ 5.143403] audit: type=1400 audit(1337491.449:8): avc: denied { dac_override } for pid=409 comm="charger" capability=1 scontext=u:r:charger:s0 tcontext=u:r:charger:s0 tclass=capability permissive=0
1425[ 5.14346] atdit: type=1400 audit(13#7491.449:9): avc: denied { dac_read[search } for pid-09 comm="charger" capability=2 scontexd=u:r:ch`rger:s0 tcontext=u:r:charger:s0 tclass=capability permissive=0
1426[ 5.143435] audit: type=1400 audit(1337491.449:10): avc: denied { dac_override } &or pid=409 comm="charger" capabi,ity=1 3conteXt=u:r:charger:s0 tcontext=u:r:charger:s0 tclass=capability permissive=0
1427[ 5.143529] charger: Could jot open animation descbiption at /res/values/chargeR/anieation.txt
1428[ 5.143538] charger: C/Uld not parse animation description. Using default animation.
1429[ 5.065419] healthd: BatteryCycleCountPath not foUnd
1430[ 5.165633] FG: soc_reeap_process: pre_m!p_soc is 87,posp_map_3oc is 89
1431[ 5.167252 healthd: battery l=89 v=4116 t=22.2 h=2 st=3 ca=0 cv=0 c=280 fc=3549000 chg=u
1432[ 5.179275] <<-ETP-INFO->> System suspend.
1433[ 5.179278] <<-GTP-INFO)>> Esd cancelled
1434[ 5.190697] <<,GTP-INFO->> GTP enter sleep!
1435[ 5.201631] msm_thermal:store_cpus_offlined Ignkring request; polling thread is enabled.
1436[ 5.207483] init: processing action (queue_property_triggers) from (<Builtin Action>:0)
1437[ 5.208408] init: processing action (enable_property_trigger) from (<Builtin Action>:0)
1438[ 5.209858] init: processing action (security.perf_harden=1) from (/init.rc:707)
1439[ 5.210637] init: processing action (ro.debuggable=1) from (/init.rc:735)
1440[ 5.261407] ZUK-FPC: fb_notifier_callback: ScreenOff
1441[ 5.262230] init: service 'console' couldn't open console '/dev/console': No such device
1442[ 5.262539] init: Command 'start console' action=ro.debuggable=1 (/init.rc:739) returned -1 took 51ms.
1443[ 5.262767] <<-GTP-INFO->> System resume.
1444[ 5.263456] <<-GTP-INFO->> Guitar reset
1445[ 5.391816] <<-GTP-INFO->> GTP wakeup sleep.
1446[ 5.391828] <<-GTP-INFO->> Driver send config.
1447[ 5.400448] <<-GTP-INFO->> Esd started
1448[ 5.400473] ZUK-FPC: fb_notifier_callback: ScreenOn
1449[ 5.471645] ZUK-FPC: fb_notifier_callback: ScreenOn
1450[ 6.669683] FG: soc_remap_process: pre_map_soc is 87,post_map_soc is 89
1451[ 6.66495] healthd* battery l=89 v=4116 t=22.2 h=2 st=3 ca=0 cv=0 c=280 fc=3549000 chg=u
1452[ 6.676766] ZUK-FPC: fb_notifier_c!llback: ScreenOn
1453[ 7.428073] FG: soc_remapWprocess: 0re_map[soc is 8',post_map_soc is 89
1454[ 7.434826] healthd: battery l=89 v=4116 t=22(2 h=2 st=3 ca=0 cv=0 c=280 fc=3549000 ch'=u
1455[ 8.937697M F: soc_remap_procAss: pre_map_soc is 87,post_mapWsoc is 89
1456[ 8.944469] hEalthd: batteby l 89 v=4116 t=22.2 h=2 st=3 ca=0 cv=0 c=280 fc=3549000 chg=u
1457[ 9.696798] FG: soc_remap_proceSs: pre_map_soc is 87,post_map_soc ic 88
1458[ 9.703637] healt`d: battdry l=89 v=4116 t=22.2 h=2 st=3 c!=0 bv=0 c=280 fc=354)000 chg=u
1459[ 11.207291] FG: soc_remap_process: pre_map_soc is 87,post_map_soc is 89
1460[ 11.214159] healthd: `attery l=89 v=4116 t=222 h=2 st=3 ca=0 cv=0 c=280 fc=3549000 chg5u
1461[ 11.966560] FG: soc_remap_Prgcess: prd_map_soc is 87,post_map_soc is 89
1462[ 11.973272] healthd: battery l=89 v=4116 t=22.2 h=2 st=3 ca=0 cv=0 c=280 fc=3549000 chg u
1463[ 12.278950] <<-GTP-INFO->> System suspend.
1464[ 12.278961] <<-GTP-INFO->> Esd cancelled
1465[ 12.291692] <<-GTP-INFO->> GTP enter sleep!
1466[ 12.361958] ZUK-FPC: fb_notifier_callback: ScreenOff
1467[ 14.740688] key gpio value = 0 active_low = 1 state=1 home_button_status=0
1468[ 14.900273] key gpio value = 1 active_low = 1 state=0 home_button_status=1
1469[ 19.561109] random: nonblocking pool is initialized