· 9 years ago · Oct 05, 2016, 09:10 AM
1[ 0.000000] Initializing cgroup subsys cpu
2[ 0.000000] Initializing cgroup subsys cpuacct
3[ 0.000000] Linux version 3.18.31-g4cb3792 (root@seldlx21330) (gcc version 4.9.x-google 20140827 (prerelease) (GCC) ) #15 SMP PREEMPT Wed Oct 5 10:49:12 CEST 2016
4[ 0.000000] CPU: AArch64 Processor [410fd032] revision 2
5[ 0.000000] alternatives: enabling workaround for ARM errata 826319, 827319, 824069
6[ 0.000000] alternatives: enabling workaround for ARM erratum 845719
7[ 0.000000] Machine: SoMC Ivy-ROW
8[ 0.000000] efi: Getting EFI parameters from FDT:
9[ 0.000000] efi: UEFI not found.
10[ 0.000000] Reserved memory: reserved region for node 'removed_regions@6300000': base 0x0000000006300000, size 13 MiB
11[ 0.000000] Reserved memory: reserved region for node 'dfps_data_mem@3400000': base 0x0000000003400000, size 0 MiB
12[ 0.000000] Reserved memory: reserved region for node 'cont_splash_mem@3400000': base 0x0000000003401000, size 34 MiB
13[ 0.000000] Reserved memory: reserved region for node 'peripheral_region@c800000': base 0x000000000ca00000, size 31 MiB
14[ 0.000000] Reserved memory: reserved region for node 'modem_region@7000000': base 0x0000000007000000, size 90 MiB
15[ 0.000000] Reserved memory: reserved region for node 'fb_region@0': base 0x0000000040000000, size 16 MiB
16[ 0.000000] Reserved memory: reserved region for node 'ramoops_region@1fe00000': base 0x000000001fe00000, size 2 MiB
17[ 0.000000] Reserved memory: allocated memory for 'secure_region' node: base 0x00000000cd400000, size 300 MiB
18[ 0.000000] Reserved memory: created CMA memory pool at 0x00000000cd400000, size 300 MiB
19[ 0.000000] Reserved memory: initialized node secure_region, compatible id shared-dma-pool
20[ 0.000000] Reserved memory: allocated memory for 'adsp_region' node: base 0x00000000c9400000, size 64 MiB
21[ 0.000000] Reserved memory: created CMA memory pool at 0x00000000c9400000, size 64 MiB
22[ 0.000000] Reserved memory: initialized node adsp_region, compatible id shared-dma-pool
23[ 0.000000] Reserved memory: allocated memory for 'qsecom_region' node: base 0x00000000c8000000, size 20 MiB
24[ 0.000000] Reserved memory: created CMA memory pool at 0x00000000c8000000, size 20 MiB
25[ 0.000000] Reserved memory: initialized node qsecom_region, compatible id shared-dma-pool
26[ 0.000000] Reserved memory: allocated memory for 'audio_region' node: base 0x00000000c7800000, size 8 MiB
27[ 0.000000] Reserved memory: created CMA memory pool at 0x00000000c7800000, size 8 MiB
28[ 0.000000] Reserved memory: initialized node audio_region, compatible id shared-dma-pool
29[ 0.000000] Removed memory: created DMA memory pool at 0x0000000006300000, size 13 MiB
30[ 0.000000] Reserved memory: initialized node removed_regions@6300000, compatible id removed-dma-pool
31[ 0.000000] Reserved memory: created DMA memory pool at 0x0000000003400000, size 0 MiB
32[ 0.000000] Reserved memory: initialized node dfps_data_mem@3400000, compatible id shared-dma-pool
33[ 0.000000] Removed memory: created DMA memory pool at 0x000000000ca00000, size 31 MiB
34[ 0.000000] Reserved memory: initialized node peripheral_region@c800000, compatible id removed-dma-pool
35[ 0.000000] Removed memory: created DMA memory pool at 0x0000000007000000, size 90 MiB
36[ 0.000000] Reserved memory: initialized node modem_region@7000000, compatible id removed-dma-pool
37[ 0.000000] Removed memory: created DMA memory pool at 0x000000001fe00000, size 2 MiB
38[ 0.000000] Reserved memory: initialized node ramoops_region@1fe00000, compatible id removed-dma-pool
39[ 0.000000] cma: Reserved 64 MiB at 0x00000000c3800000
40[ 0.000000] PERCPU: Embedded 13 pages/cpu @ffffffc0c34b0000 s22400 r0 d30848 u53248
41[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 722255
42[ 0.000000] Kernel command line: sched_enable_hmp=1 sched_enable_power_aware=1 console=ttyHSL0,115200,n8 lpm_levels.sleep_disabled=1 boot_cpus=0-5 user_debug=31 androidboot.selinux=permissive msm_rtb.filter=0x3F ehci-hcd.park=3 dwc3.maximum_speed=high dwc3_msm.prop_chg_detect=Y coherent_pool=8M sched_enable_power_aware=1 androidboot.hardware=ivy androidboot.bootdevice=f9824900.sdhci androidboot.bootloader=s1 oemandroidboot.s1boot=1289-5620_S1_Boot_MSM8994_LA1.2.2_38 androidboot.serialno=CB5A24Y97F ta_info=1,16,256 startup=0x00000004 warmboot=0x77665501 oemandroidboot.imei=0044024545638400 oemandroidboot.phoneid=0000:0044024545638400 oemandroidboot.security=0 oemandroidboot.babe08b3=50000000 oemandroidboot.securityflags=0x00000000 oemandroidboot.aid=1 lcdid_adc=0x7B3DE display_status=off androidboot.baseband=msm
43[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
44[ 0.000000] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
45[ 0.000000] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
46[ 0.000000] Memory: 2289624K/3006460K available (11769K kernel code, 2012K rwdata, 5348K rodata, 488K init, 3084K bss, 716836K reserved)
47[ 0.000000] Virtual kernel memory layout:
48[ 0.000000] vmalloc : 0xffffff8000000000 - 0xffffffbabfff0000 ( 234 GB)
49[ 0.000000] vmemmap : 0xffffffbac0000000 - 0xffffffbfc0000000 ( 20 GB maximum)
50[ 0.000000] 0xffffffbac0000000 - 0xffffffbac8c00000 ( 140 MB actual)
51[ 0.000000] PCI I/O : 0xffffffbffa000000 - 0xffffffbffb000000 ( 16 MB)
52[ 0.000000] fixed : 0xffffffbffbdfd000 - 0xffffffbffbdff000 ( 8 KB)
53[ 0.000000] modules : 0xffffffbffc000000 - 0xffffffc000000000 ( 64 MB)
54[ 0.000000] memory : 0xffffffc000000000 - 0xffffffc0e0000000 ( 3584 MB)
55[ 0.000000] .init : 0xffffffc00113a000 - 0xffffffc0011b4000 ( 488 KB)
56[ 0.000000] .text : 0xffffffc000080000 - 0xffffffc0011396a4 ( 17126 KB)
57[ 0.000000] .data : 0xffffffc0011be000 - 0xffffffc0013b5000 ( 2012 KB)
58[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
59[ 0.000000] HMP scheduling enabled.
60[ 0.000000] Preemptible hierarchical RCU implementation.
61[ 0.000000] RCU debugfs-based tracing is enabled.
62[ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
63[ 0.000000] Additional per-CPU info printed with stalls.
64[ 0.000000] NR_IRQS:64 nr_irqs:64 0
65[ 0.000000] mpm_init_irq_domain(): Cannot find irq controller for qcom,gpio-parent
66[ 0.000000] MPM 1 irq mapping errored -517
67[ 0.000000] Offload RCU callbacks from all CPUs
68[ 0.000000] Offload RCU callbacks from CPUs: 0-7.
69[ 0.000000] Architected cp15 and mmio timer(s) running at 19.20MHz (virt/virt).
70[ 0.000007] sched_clock: 56 bits at 19MHz, resolution 52ns, wraps every 3579139424256ns
71[ 0.000024] Switched to clocksource arch_sys_counter
72[ 0.006092] allocated 16777216 bytes of page_cgroup
73[ 0.006104] please try 'cgroup_disable=memory' option if you don't want memory cgroups
74[ 0.006121] Calibrating delay loop (skipped), value calculated using timer frequency.. 38.40 BogoMIPS (lpj=192000)
75[ 0.006133] pid_max: default: 32768 minimum: 301
76[ 0.006238] Security Framework initialized
77[ 0.006271] SELinux: Initializing.
78[ 0.006398] Mount-cache hash table entries: 8192 (order: 4, 65536 bytes)
79[ 0.006413] Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes)
80[ 0.007199] Initializing cgroup subsys memory
81[ 0.007226] Initializing cgroup subsys devices
82[ 0.007240] Initializing cgroup subsys freezer
83[ 0.007253] Initializing cgroup subsys debug
84[ 0.007843] /cpus/cpu@0: Missing clock-frequency property
85[ 0.007859] /cpus/cpu@1: Missing clock-frequency property
86[ 0.007874] /cpus/cpu@2: Missing clock-frequency property
87[ 0.007889] /cpus/cpu@3: Missing clock-frequency property
88[ 0.007905] /cpus/cpu@4: Missing clock-frequency property
89[ 0.007923] /cpus/cpu@5: Missing clock-frequency property
90[ 0.007942] /cpus/cpu@6: Missing clock-frequency property
91[ 0.007961] /cpus/cpu@7: Missing clock-frequency property
92[ 0.010879] hw perfevents: enabled with arm/armv8-pmuv3 PMU driver, 7 counters available
93[ 0.010915] EFI services will not be available.
94[ 0.011054] NOHZ: local_softirq_pending 02
95[ 0.015379]
96[ 0.015379] **********************************************************
97[ 0.015390] ** NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE **
98[ 0.015396] ** **
99[ 0.015402] ** trace_printk() being used. Allocating extra memory. **
100[ 0.015408] ** **
101[ 0.015414] ** This means that this is a DEBUG kernel and it is **
102[ 0.015420] ** unsafe for produciton use. **
103[ 0.015426] ** **
104[ 0.015432] ** If you see this message and you are not debugging **
105[ 0.015438] ** the kernel, report this immediately to your vendor! **
106[ 0.015443] ** **
107[ 0.015449] ** NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE **
108[ 0.015456] **********************************************************
109[ 0.028435] msm8994-v2: configuring clocks for the A57 cluster
110[ 0.028490] msm8994-v2: finished configuring A57 cluster clocks.
111[ 0.047737] alternatives: enabling workaround for ARM erratum 832075
112[ 0.051734] Brought up 6 CPUs
113[ 0.051754] SMP: Total of 6 processors activated.
114[ 0.051839] alternatives: patching kernel code
115[ 0.123925] pinctrl core: initialized pinctrl subsystem
116[ 0.124411] regulator-dummy: no parameters
117[ 0.214494] NET: Registered protocol family 16
118[ 0.270160] cpuidle: using governor menu
119[ 0.290177] cpuidle: using governor qcom
120[ 0.292101] vdso: 2 pages (1 code @ ffffffc0011c5000, 1 data @ ffffffc0011c4000)
121[ 0.293476] software IO TLB [mem 0xb6800000-0xb6c00000] (4MB) mapped at [ffffffc0b6800000-ffffffc0b6bfffff]
122[ 0.300773] DMA: preallocated 8192 KiB pool for atomic allocations
123[ 0.302084] rpm_smd_regulator_driver_init: ----------------------------RPM-SMD-REGULATOR REGISTER VREG DEVICE DRIVER-----------------------------
124[ 0.302142] rpm_smd_regulator_driver_init: ----------------------------RPM-SMD-REGULATOR REGISTER VREG RESOURCE DRIVER-----------------------------
125[ 0.312485] platform fd998300.qcom,mdss_dsi_pll: assigned reserved memory node dfps_data_mem@3400000
126[ 0.319797] sps:sps is ready.
127[ 0.326873] smd_channel_probe_now: allocation table not initialized
128[ 0.328057] smd_channel_probe_now: allocation table not initialized
129[ 0.329582] msm_watchdog f9017000.qcom,wdt: wdog absent resource not present
130[ 0.329847] cpu 0 reg dump setup failed
131[ 0.329857] cpu 1 reg dump setup failed
132[ 0.329865] cpu 2 reg dump setup failed
133[ 0.329872] cpu 3 reg dump setup failed
134[ 0.329880] cpu 4 reg dump setup failed
135[ 0.329888] cpu 5 reg dump setup failed
136[ 0.329896] cpu 6 reg dump setup failed
137[ 0.329903] cpu 7 reg dump setup failed
138[ 0.329960] msm_watchdog f9017000.qcom,wdt: MSM Watchdog Initialized
139[ 0.332038] msm_rpm_glink_dt_parse: qcom,rpm-glink compatible not matches
140[ 0.332050] msm_rpm_dev_probe: APSS-RPM communication over SMD
141[ 0.332735] pm8994_s1_corner: 0 <--> 0 mV at 0 mV normal idle
142[ 0.333285] pm8994_s1_floor_corner: 0 <--> 0 mV at 0 mV normal idle
143[ 0.334067] pm8994_s1_corner_ao: 0 <--> 0 mV at 0 mV normal idle
144[ 0.334914] pm8994_s2_corner: 0 <--> 0 mV at 0 mV normal idle
145[ 0.335440] pm8994_s2_corner_ao: 0 <--> 0 mV at 0 mV normal idle
146[ 0.336112] pm8994_s3: 1300 mV normal idle
147[ 0.336804] pm8994_s4: 1800 mV normal idle
148[ 0.337481] pm8994_s5: 2150 mV normal idle
149[ 0.338169] pm8994_s7: 1000 mV normal idle
150[ 0.338832] pm8994_l1: 1000 mV normal idle
151[ 0.339548] pm8994_l2: 1250 mV normal idle
152[ 0.341170] pm8994_l3: 1000 mV normal idle
153[ 0.341868] pm8994_l4: 1225 mV normal idle
154[ 0.342555] pm8994_l6: 1800 mV normal idle
155[ 0.343261] pm8994_l8: 1800 mV normal idle
156[ 0.343924] pm8994_l9: 1800 mV normal idle
157[ 0.344616] pm8994_l10: 1800 mV normal idle
158[ 0.345305] pm8994_l11: 1200 mV normal idle
159[ 0.346021] pm8994_l12: 1800 mV normal idle
160[ 0.347533] pm8994_l13: 1800 <--> 2950 mV at 2950 mV normal idle
161[ 0.348258] pm8994_l14: 1800 mV normal idle
162[ 0.349587] pm8994_l15: 1800 mV normal idle
163[ 0.350294] pm8994_l16: 2700 mV normal idle
164[ 0.351024] pm8994_l17: 2700 mV normal idle
165[ 0.351715] pm8994_l18: 2850 mV normal idle
166[ 0.352911] pm8994_l20: 2950 mV normal idle
167[ 0.353587] pm8994_l21: 2950 mV normal idle
168[ 0.354319] pm8994_l22: 3000 mV normal idle
169[ 0.355008] pm8994_l23: 2800 mV normal idle
170[ 0.355712] pm8994_l24: 3075 <--> 3150 mV at 3075 mV normal idle
171[ 0.356428] pm8994_l25: 1000 mV normal idle
172[ 0.357122] pm8994_l26: 987 mV normal idle
173[ 0.357815] pm8994_l27: 1200 mV normal idle
174[ 0.358836] pm8994_l28: 1000 mV normal idle
175[ 0.359754] pm8994_l29: 2700 mV normal idle
176[ 0.360741] pm8994_l30: 1800 mV normal idle
177[ 0.362065] pm8994_l31: 1200 mV normal idle
178[ 0.362945] pm8994_lvs1: no parameters
179[ 0.363580] pm8994_lvs2: no parameters
180[ 0.364242] pmi8994_s1: 1025 mV normal idle
181[ 0.364923] pmi8994_s2_corner: 0 <--> 0 mV at 0 mV normal idle
182[ 0.365466] pmi8994_s2_floor_corner: 0 <--> 0 mV at 0 mV normal idle
183[ 0.366118] pmi8994_boost_5v: no parameters
184[ 0.366554] pmi8994_boost_pin_ctrl: no parameters
185[ 0.367239] pmi8994_boostbypass: 3150 <--> 3600 mV at 3150 mV normal idle
186[ 0.368568] platform 0.qcom,dsp_sharedmem: assigned reserved memory node adsp_region
187[ 0.369338] platform 0.qcom,sensors_sharedmem: assigned reserved memory node adsp_region
188[ 0.372432] irq: no irq domain found for /soc/pinctrl@fd510000 !
189[ 0.373907] spmi_pmic_arb fc4cf000.qcom,spmi: missing property: qcom,pmic-arb-max-peripherals
190[ 0.373924] spmi_pmic_arb fc4cf000.qcom,spmi: PMIC Arb Version-1 0x20000002
191[ 0.374205] spmi_pmic_arb fc4cf000.qcom,spmi: missing property: qcom,pmic-arb-max-periph-interrupts
192[ 0.383357] platform fdce0000.qcom,venus: assigned reserved memory node peripheral_region@c800000
193[ 0.384042] platform fc880000.qcom,mss: assigned reserved memory node modem_region@7000000
194[ 0.384565] platform fe200000.qcom,lpass: assigned reserved memory node peripheral_region@c800000
195[ 0.400937] qcom,rpmcc-8994 fc401880.qcom,rpmcc: Registered RPM clocks.
196[ 0.409841] ------------[ cut here ]------------
197[ 0.409878] WARNING: CPU: 1 PID: 1 at drivers/clk/msm/clock-local2.c:1005 branch_clk_handoff+0x74/0xb4()
198[ 0.409887] gcc_lpass_q6_axi_clk clock is enabled in HW even though ENABLE_BIT is not set
199[ 0.409903] CPU: 1 PID: 1 Comm: swapper/0 Not tainted 3.18.31-g4cb3792 #15
200[ 0.409912] Hardware name: SoMC Ivy-ROW (DT)
201[ 0.409920] Call trace:
202[ 0.409939] [<ffffffc0000899c0>] dump_backtrace+0x0/0x270
203[ 0.409954] [<ffffffc000089c44>] show_stack+0x14/0x1c
204[ 0.409970] [<ffffffc000be6e70>] dump_stack+0x88/0xac
205[ 0.409986] [<ffffffc0000a2d8c>] warn_slowpath_common+0x88/0xb0
206[ 0.410000] [<ffffffc0000a2e40>] warn_slowpath_fmt+0x60/0x80
207[ 0.410012] [<ffffffc0008d7e0c>] branch_clk_handoff+0x74/0xb4
208[ 0.410028] [<ffffffc0008d45e4>] __handoff_clk+0xc8/0x300
209[ 0.410041] [<ffffffc0008d5074>] msm_clock_register+0x19c/0x258
210[ 0.410055] [<ffffffc0008d51b8>] of_msm_clock_register+0x88/0x98
211[ 0.410070] [<ffffffc0008e12dc>] msm_gcc_8994_probe+0x314/0x388
212[ 0.410085] [<ffffffc0005092e8>] platform_drv_probe+0x38/0x84
213[ 0.410100] [<ffffffc000507920>] driver_probe_device+0x164/0x380
214[ 0.410114] [<ffffffc000507b68>] __device_attach+0x2c/0x4c
215[ 0.410128] [<ffffffc00050623c>] bus_for_each_drv+0x7c/0xac
216[ 0.410143] [<ffffffc000507c84>] device_attach+0x6c/0x98
217[ 0.410157] [<ffffffc000506440>] bus_probe_device+0x2c/0xa0
218[ 0.410170] [<ffffffc000503dd8>] device_add+0x35c/0x5a4
219[ 0.410185] [<ffffffc00080ba7c>] of_device_add+0x3c/0x44
220[ 0.410198] [<ffffffc00080c4ac>] of_platform_device_create_pdata+0x98/0xd8
221[ 0.410211] [<ffffffc00080c7bc>] of_platform_bus_create+0x2d0/0x3a4
222[ 0.410224] [<ffffffc00080c830>] of_platform_bus_create+0x344/0x3a4
223[ 0.410237] [<ffffffc00080ca24>] of_platform_populate+0x70/0xac
224[ 0.410254] [<ffffffc00113ddf4>] arm64_device_init+0x20/0x2c
225[ 0.410268] [<ffffffc00113abb8>] do_one_initcall+0x1a0/0x1bc
226[ 0.410282] [<ffffffc00113ada8>] kernel_init_freeable+0x1d4/0x28c
227[ 0.410295] [<ffffffc000be014c>] kernel_init+0x10/0xdc
228[ 0.410369] ---[ end trace 9c41fbf1d3d98dd5 ]---
229[ 0.413253] qcom,gcc-8994 fc400000.qcom,gcc: Registered GCC clocks.
230[ 0.425880] qcom,mmsscc-8994 fd8c0000.qcom,mmsscc: Registered MMSS clocks.
231[ 0.429741] i2c-msm-v2 f9924000.i2c: could not find pctldev for node /soc/pinctrl@fd510000/pmx_i2c_2/i2c_2_active, deferring probe
232[ 0.430415] i2c-msm-v2 f9928000.i2c: could not find pctldev for node /soc/pinctrl@fd510000/msm_gpio_27, deferring probe
233[ 0.435387] tsens_tm_probe: TSENS init OK
234[ 0.439236] msm-thermal soc:qcom,msm-thermal: msm_thermal:Failed reading node=/soc/qcom,msm-thermal, key=qcom,rpm-phase-resource-type err=-22. KTM continues
235[ 0.439264] msm-thermal soc:qcom,msm-thermal: msm_thermal:Failed reading node=/soc/qcom,msm-thermal, key=qcom,gfx-sensor-id. err=-22. KTM continues
236[ 0.439463] msm-thermal soc:qcom,msm-thermal: probe_psm:Failed reading node=/soc/qcom,msm-thermal, key=qcom,pmic-sw-mode-temp. err=-22. KTM continues
237[ 0.440175] cpu cpu0: dev_pm_opp_get_opp_count: device OPP not found (-19)
238[ 0.440188] msm_thermal:get_cpu_freq_plan_len Error reading CPU0 freq table len. error:-19
239[ 0.440203] cpu cpu4: dev_pm_opp_get_opp_count: device OPP not found (-19)
240[ 0.440214] msm_thermal:get_cpu_freq_plan_len Error reading CPU4 freq table len. error:-19
241[ 0.440223] msm_thermal:vdd_restriction_reg_init Defer vdd rstr freq init.
242[ 0.440253] msm-thermal soc:qcom,msm-thermal: probe_ocr:Failed reading node=/soc/qcom,msm-thermal, key=qcom,pmic-opt-curr-temp err:-22. KTM continues
243[ 0.443202] cpu cpu0: dev_pm_opp_get_opp_count: device OPP not found (-19)
244[ 0.443215] msm_thermal:get_cpu_freq_plan_len Error reading CPU0 freq table len. error:-19
245[ 0.443230] cpu cpu4: dev_pm_opp_get_opp_count: device OPP not found (-19)
246[ 0.443240] msm_thermal:get_cpu_freq_plan_len Error reading CPU4 freq table len. error:-19
247[ 0.443254] cpu cpu0: dev_pm_opp_get_opp_count: device OPP not found (-19)
248[ 0.443264] msm_thermal:get_cpu_freq_plan_len Error reading CPU0 freq table len. error:-19
249[ 0.443277] cpu cpu4: dev_pm_opp_get_opp_count: device OPP not found (-19)
250[ 0.443287] msm_thermal:get_cpu_freq_plan_len Error reading CPU4 freq table len. error:-19
251[ 0.444531] platform soc:audio_heap: assigned reserved memory node audio_region
252[ 0.445042] platform soc:adsp_heap: assigned reserved memory node adsp_region
253[ 0.447234] mem_acc0_corner: 0 <--> 0 mV
254[ 0.447810] mem_acc1_corner: 0 <--> 0 mV
255[ 0.448531] cpr_efuse_init: apc0_corner: efuse_addr = 0x00000000fc4bc000 (len=0x1000)
256[ 0.448607] cpr_fuse_is_setting_expected: apc0_corner: [row:140] = 0x11129ce700889d2c @61:3 == 1 ?: no
257[ 0.448632] cpr_read_fuse_revision: apc0_corner: fuse revision = 4
258[ 0.448783] cpr_adjust_init_voltages: apc0_corner: adjusted initial voltage[2]: 900000 -> 875000 uV
259[ 0.448800] cpr_adjust_init_voltages: apc0_corner: adjusted initial voltage[3]: 900000 -> 875000 uV
260[ 0.448826] cpr_pvs_init: apc0_corner: pvs voltage: [800000 875000 875000 1075000] uV
261[ 0.448841] cpr_pvs_init: apc0_corner: ceiling voltage: [900000 900000 1000000 1180000] uV
262[ 0.448856] cpr_pvs_init: apc0_corner: floor voltage: [700000 700000 780000 835000] uV
263[ 0.449670] cpr_efuse_init: apc1_corner: efuse_addr = 0x00000000fc4bc000 (len=0x1000)
264[ 0.449728] cpr_fuse_is_setting_expected: apc1_corner: [row:140] = 0x11129ce700889d2c @61:3 == 1 ?: no
265[ 0.449752] cpr_read_fuse_revision: apc1_corner: fuse revision = 4
266[ 0.449771] cpr_parse_speed_bin_fuse: apc1_corner: [row: 22]: 0x10820820883925c8, speed_bits = 0
267[ 0.449924] cpr_adjust_init_voltages: apc1_corner: adjusted initial voltage[3]: 910000 -> 885000 uV
268[ 0.449943] cpr_adjust_init_voltages: apc1_corner: adjusted initial voltage[4]: 1085000 -> 1050000 uV
269[ 0.449961] cpr_pvs_init: apc1_corner: pvs voltage: [810000 810000 885000 1050000] uV
270[ 0.449975] cpr_pvs_init: apc1_corner: ceiling voltage: [900000 900000 1000000 1225000] uV
271[ 0.449990] cpr_pvs_init: apc1_corner: floor voltage: [700000 700000 750000 835000] uV
272[ 0.478867] msm_pinctrl_probe: Probing MSM PINCTRL........
273[ 0.482021] __of_mpm_init(): MPM driver mapping exists
274[ 0.482229] MPM initialization SUCCESS.
275[ 0.483169] platform soc:ramoops: assigned reserved memory node ramoops_region@1fe00000
276[ 0.485142] console [pstore-1] enabled
277[ 0.485295] ramoops: attached 0x200000@0x1fe00000, ecc: 0/0
278[ 0.486782] i2c-msm-v2 f9926000.i2c: probing driver i2c-msm-v2
279[ 0.487027] AXI: msm_bus_scale_register_client(): msm_bus_scale_register_client: Bus driver not ready.
280[ 0.487044] i2c-msm-v2 f9926000.i2c: msm_bus_scale_register_client(mstr-id:86):0 (not a problem)
281[ 0.529803] msm8994-pinctrl fd510000.pinctrl: not freeing pin 2 (GPIO_2) as part of deactivating group gpio2 - it is already used for some other setting
282[ 0.532534] pm8994_s8: 700 <--> 1180 mV at 1000 mV normal idle
283[ 0.532788] spm_regulator_probe: name=pm8994_s8, range=LV, voltage=1000000 uV, mode=AUTO, step rate=2400 uV/us
284[ 0.533079] pm8994_s11: 700 <--> 1225 mV at 1000 mV normal idle
285[ 0.533243] spm_regulator_probe: name=pm8994_s11, range=LV, voltage=1000000 uV, mode=AUTO, step rate=2400 uV/us
286[ 0.534433] i2c-msm-v2 f9924000.i2c: probing driver i2c-msm-v2
287[ 0.534662] AXI: msm_bus_scale_register_client(): msm_bus_scale_register_client: Bus driver not ready.
288[ 0.534680] i2c-msm-v2 f9924000.i2c: msm_bus_scale_register_client(mstr-id:86):0 (not a problem)
289[ 0.536435] i2c-msm-v2 f9928000.i2c: probing driver i2c-msm-v2
290[ 0.536649] AXI: msm_bus_scale_register_client(): msm_bus_scale_register_client: Bus driver not ready.
291[ 0.536666] i2c-msm-v2 f9928000.i2c: msm_bus_scale_register_client(mstr-id:86):0 (not a problem)
292[ 0.538144] cpr_efuse_init: apc0_corner: efuse_addr = 0x00000000fc4bc000 (len=0x1000)
293[ 0.538209] cpr_fuse_is_setting_expected: apc0_corner: [row:140] = 0x11129ce700889d2c @61:3 == 1 ?: no
294[ 0.538237] cpr_read_fuse_revision: apc0_corner: fuse revision = 4
295[ 0.538390] cpr_adjust_init_voltages: apc0_corner: adjusted initial voltage[2]: 900000 -> 875000 uV
296[ 0.538410] cpr_adjust_init_voltages: apc0_corner: adjusted initial voltage[3]: 900000 -> 875000 uV
297[ 0.538438] cpr_pvs_init: apc0_corner: pvs voltage: [800000 875000 875000 1075000] uV
298[ 0.538455] cpr_pvs_init: apc0_corner: ceiling voltage: [900000 900000 1000000 1180000] uV
299[ 0.538472] cpr_pvs_init: apc0_corner: floor voltage: [700000 700000 780000 835000] uV
300[ 0.538765] cpr_init_cpr_parameters: apc0_corner: up threshold = 2, down threshold = 4
301[ 0.538807] cpr_init_cpr_parameters: apc0_corner: CPR is enabled by default.
302[ 0.538884] cpr_init_cpr_efuse: apc0_corner: [row:137] = 0x2999949280000000
303[ 0.538919] cpr_init_cpr_efuse: apc0_corner: Corner[1]: ro_sel = 0, target quot = 410
304[ 0.538936] cpr_init_cpr_efuse: apc0_corner: Corner[2]: ro_sel = 0, target quot = 410
305[ 0.538952] cpr_init_cpr_efuse: apc0_corner: Corner[3]: ro_sel = 0, target quot = 510
306[ 0.538969] cpr_init_cpr_efuse: apc0_corner: Corner[4]: ro_sel = 0, target quot = 830
307[ 0.539015] cpr_adjust_target_quots: apc0_corner: Corner[2]: adjusted target quot = 360
308[ 0.539033] cpr_adjust_target_quots: apc0_corner: Corner[3]: adjusted target quot = 420
309[ 0.539058] cpr_init_cpr_efuse: apc0_corner: invalid quotient values; permanently disabling CPR
310[ 0.539144] cpr_get_corner_quot_adjustment: apc0_corner: fuse corner 2 quotient adjustment scaling factor: 0.000
311[ 0.539158] cpr_get_corner_quot_adjustment: apc0_corner: fuse corner 3 quotient adjustment scaling factor: 0.194
312[ 0.539172] cpr_get_corner_quot_adjustment: apc0_corner: fuse corner 4 quotient adjustment scaling factor: 0.520
313[ 0.539193] cpr_get_corner_quot_adjustment: apc0_corner: adjusted quotient[1] = 410
314[ 0.539206] cpr_get_corner_quot_adjustment: apc0_corner: adjusted quotient[2] = 360
315[ 0.539217] cpr_get_corner_quot_adjustment: apc0_corner: adjusted quotient[3] = 360
316[ 0.539230] cpr_get_corner_quot_adjustment: apc0_corner: adjusted quotient[4] = 360
317[ 0.539242] cpr_get_corner_quot_adjustment: apc0_corner: adjusted quotient[5] = 388
318[ 0.539253] cpr_get_corner_quot_adjustment: apc0_corner: adjusted quotient[6] = 402
319[ 0.539265] cpr_get_corner_quot_adjustment: apc0_corner: adjusted quotient[7] = 420
320[ 0.539277] cpr_get_corner_quot_adjustment: apc0_corner: adjusted quotient[8] = 471
321[ 0.539288] cpr_get_corner_quot_adjustment: apc0_corner: adjusted quotient[9] = 521
322[ 0.539300] cpr_get_corner_quot_adjustment: apc0_corner: adjusted quotient[10] = 671
323[ 0.539312] cpr_get_corner_quot_adjustment: apc0_corner: adjusted quotient[11] = 721
324[ 0.539324] cpr_get_corner_quot_adjustment: apc0_corner: adjusted quotient[12] = 790
325[ 0.539335] cpr_get_corner_quot_adjustment: apc0_corner: adjusted quotient[13] = 830
326[ 0.539423] cpr_fill_override_voltage: apc0_corner: ceiling override voltage: [900000 900000 900000 900000 1000000 1000000 1000000 1115000 1115000 1180000 1180000 1180000 1180000] uV
327[ 0.539466] cpr_fill_override_voltage: apc0_corner: floor override voltage: [700000 700000 700000 725000 780000 800000 825000 835000 850000 915000 970000 980000 1000000] uV
328[ 0.539604] cpr_config: apc0_corner: Timer count: 0x17700 (for 5000 us)
329[ 0.540129] apc0_corner: 0 <--> 0 mV
330[ 0.540727] cpr_efuse_init: apc1_corner: efuse_addr = 0x00000000fc4bc000 (len=0x1000)
331[ 0.540791] cpr_fuse_is_setting_expected: apc1_corner: [row:140] = 0x11129ce700889d2c @61:3 == 1 ?: no
332[ 0.540819] cpr_read_fuse_revision: apc1_corner: fuse revision = 4
333[ 0.540840] cpr_parse_speed_bin_fuse: apc1_corner: [row: 22]: 0x10820820883925c8, speed_bits = 0
334[ 0.540999] cpr_adjust_init_voltages: apc1_corner: adjusted initial voltage[3]: 910000 -> 885000 uV
335[ 0.541019] cpr_adjust_init_voltages: apc1_corner: adjusted initial voltage[4]: 1085000 -> 1050000 uV
336[ 0.541039] cpr_pvs_init: apc1_corner: pvs voltage: [810000 810000 885000 1050000] uV
337[ 0.541056] cpr_pvs_init: apc1_corner: ceiling voltage: [900000 900000 1000000 1225000] uV
338[ 0.541072] cpr_pvs_init: apc1_corner: floor voltage: [700000 700000 750000 835000] uV
339[ 0.541368] cpr_init_cpr_parameters: apc1_corner: up threshold = 2, down threshold = 4
340[ 0.541406] cpr_init_cpr_parameters: apc1_corner: CPR is enabled by default.
341[ 0.541478] cpr_init_cpr_efuse: apc1_corner: [row:138] = 0x9a520daa8a82faa0
342[ 0.541512] cpr_init_cpr_efuse: apc1_corner: Corner[1]: ro_sel = 4, target quot = 840
343[ 0.541529] cpr_init_cpr_efuse: apc1_corner: Corner[2]: ro_sel = 4, target quot = 840
344[ 0.541545] cpr_init_cpr_efuse: apc1_corner: Corner[3]: ro_sel = 4, target quot = 1090
345[ 0.541562] cpr_init_cpr_efuse: apc1_corner: Corner[4]: ro_sel = 4, target quot = 1440
346[ 0.541842] cpr_adjust_target_quots: apc1_corner: Corner[3]: adjusted target quot = 985
347[ 0.541860] cpr_adjust_target_quots: apc1_corner: Corner[4]: adjusted target quot = 1325
348[ 0.541959] cpr_get_corner_quot_adjustment: apc1_corner: fuse corner 2 quotient adjustment scaling factor: 0.000
349[ 0.541974] cpr_get_corner_quot_adjustment: apc1_corner: fuse corner 3 quotient adjustment scaling factor: 0.443
350[ 0.541987] cpr_get_corner_quot_adjustment: apc1_corner: fuse corner 4 quotient adjustment scaling factor: 0.340
351[ 0.542009] cpr_get_corner_quot_adjustment: apc1_corner: adjusted quotient[1] = 840
352[ 0.542021] cpr_get_corner_quot_adjustment: apc1_corner: adjusted quotient[2] = 840
353[ 0.542033] cpr_get_corner_quot_adjustment: apc1_corner: adjusted quotient[3] = 840
354[ 0.542045] cpr_get_corner_quot_adjustment: apc1_corner: adjusted quotient[4] = 840
355[ 0.542057] cpr_get_corner_quot_adjustment: apc1_corner: adjusted quotient[5] = 840
356[ 0.542068] cpr_get_corner_quot_adjustment: apc1_corner: adjusted quotient[6] = 900
357[ 0.542080] cpr_get_corner_quot_adjustment: apc1_corner: adjusted quotient[7] = 943
358[ 0.542092] cpr_get_corner_quot_adjustment: apc1_corner: adjusted quotient[8] = 985
359[ 0.542105] cpr_get_corner_quot_adjustment: apc1_corner: adjusted quotient[9] = 1084
360[ 0.542117] cpr_get_corner_quot_adjustment: apc1_corner: adjusted quotient[10] = 1117
361[ 0.542129] cpr_get_corner_quot_adjustment: apc1_corner: adjusted quotient[11] = 1149
362[ 0.542141] cpr_get_corner_quot_adjustment: apc1_corner: adjusted quotient[12] = 1182
363[ 0.542152] cpr_get_corner_quot_adjustment: apc1_corner: adjusted quotient[13] = 1215
364[ 0.542164] cpr_get_corner_quot_adjustment: apc1_corner: adjusted quotient[14] = 1247
365[ 0.542176] cpr_get_corner_quot_adjustment: apc1_corner: adjusted quotient[15] = 1260
366[ 0.542188] cpr_get_corner_quot_adjustment: apc1_corner: adjusted quotient[16] = 1280
367[ 0.542200] cpr_get_corner_quot_adjustment: apc1_corner: adjusted quotient[17] = 1325
368[ 0.542296] cpr_fill_override_voltage: apc1_corner: ceiling override voltage: [900000 900000 900000 900000 900000 1000000 1000000 1000000 1160000 1160000 1160000 1160000 1160000 1225000 1225000 1225000 1225000] uV
369[ 0.542345] cpr_fill_override_voltage: apc1_corner: floor override voltage: [700000 700000 700000 700000 725000 750000 775000 795000 835000 860000 880000 895000 915000 935000 945000 950000 980000] uV
370[ 0.542493] cpr_config: apc1_corner: Timer count: 0x17700 (for 5000 us)
371[ 0.543025] apc1_corner: 0 <--> 0 mV
372[ 0.544193] cpu-clock-8994 f9015000.qcom,cpu-clock-8994: using A57 speed bin 0 and pvs_ver 0
373[ 0.550500] clock-cpu-8994: set OPP pair (384000000 Hz, 875000 uv) on cpu0
374[ 0.550551] clock-cpu-8994: set OPP pair (1555200000 Hz, 1075000 uv) on cpu0
375[ 0.550588] clock-cpu-8994: set OPP pair (384000000 Hz, 875000 uv) on cpu1
376[ 0.550637] clock-cpu-8994: set OPP pair (1555200000 Hz, 1075000 uv) on cpu1
377[ 0.550676] clock-cpu-8994: set OPP pair (384000000 Hz, 875000 uv) on cpu2
378[ 0.550716] clock-cpu-8994: set OPP pair (1555200000 Hz, 1075000 uv) on cpu2
379[ 0.550756] clock-cpu-8994: set OPP pair (384000000 Hz, 875000 uv) on cpu3
380[ 0.550795] clock-cpu-8994: set OPP pair (1555200000 Hz, 1075000 uv) on cpu3
381[ 0.550849] clock-cpu-8994: set OPP pair (384000000 Hz, 810000 uv) on cpu4
382[ 0.550905] clock-cpu-8994: set OPP pair (1958400000 Hz, 1050000 uv) on cpu4
383[ 0.550955] clock-cpu-8994: set OPP pair (384000000 Hz, 810000 uv) on cpu5
384[ 0.551003] clock-cpu-8994: set OPP pair (1958400000 Hz, 1050000 uv) on cpu5
385[ 0.551056] clock-cpu-8994: set OPP pair (384000000 Hz, 810000 uv) on cpu6
386[ 0.551111] clock-cpu-8994: set OPP pair (1958400000 Hz, 1050000 uv) on cpu6
387[ 0.551168] clock-cpu-8994: set OPP pair (384000000 Hz, 810000 uv) on cpu7
388[ 0.551216] clock-cpu-8994: set OPP pair (1958400000 Hz, 1050000 uv) on cpu7
389[ 0.551229] clock-cpu-8994: OPP tables populated (cpu 3 and 7)
390[ 0.551242] clock_cpu: a53: OPP voltage for 384000000: 875000
391[ 0.551253] clock_cpu: a53: OPP voltage for 1555200000: 1075000
392[ 0.551265] clock_cpu: a57: OPP voltage for 384000000: 810000
393[ 0.551276] clock_cpu: a57: OPP voltage for 1958400000: 1050000
394[ 0.608095] msm_cpuss_dump soc:cpuss_dump: Data dump setup failed, id = 36
395[ 0.609021] msm_cpuss_dump soc:cpuss_dump: Data dump setup failed, id = 37
396[ 0.609918] msm_cpuss_dump soc:cpuss_dump: Data dump setup failed, id = 38
397[ 0.610882] msm_cpuss_dump soc:cpuss_dump: Data dump setup failed, id = 39
398[ 0.611779] msm_cpuss_dump soc:cpuss_dump: Data dump setup failed, id = 68
399[ 0.612677] msm_cpuss_dump soc:cpuss_dump: Data dump setup failed, id = 69
400[ 0.613572] msm_cpuss_dump soc:cpuss_dump: Data dump setup failed, id = 70
401[ 0.614466] msm_cpuss_dump soc:cpuss_dump: Data dump setup failed, id = 71
402[ 0.615366] msm_cpuss_dump soc:cpuss_dump: Data dump setup failed, id = 288
403[ 0.616271] msm_cpuss_dump soc:cpuss_dump: Data dump setup failed, id = 289
404[ 0.616300] msm_cpuss_dump soc:cpuss_dump: Couldn't get memory for dumping
405[ 0.619982] msm_cpuss_dump soc:cpuss_dump: Data dump setup failed, id = 193
406[ 0.621529] msm_cpuss_dump soc:cpuss_dump: Data dump setup failed, id = 96
407[ 0.622465] msm_cpuss_dump soc:cpuss_dump: Data dump setup failed, id = 97
408[ 0.623400] msm_cpuss_dump soc:cpuss_dump: Data dump setup failed, id = 98
409[ 0.624334] msm_cpuss_dump soc:cpuss_dump: Data dump setup failed, id = 99
410[ 0.625288] msm_cpuss_dump soc:cpuss_dump: Data dump setup failed, id = 100
411[ 0.626242] msm_cpuss_dump soc:cpuss_dump: Data dump setup failed, id = 101
412[ 0.627201] msm_cpuss_dump soc:cpuss_dump: Data dump setup failed, id = 102
413[ 0.628161] msm_cpuss_dump soc:cpuss_dump: Data dump setup failed, id = 103
414[ 0.629100] msm_cpuss_dump soc:cpuss_dump: Data dump setup failed, id = 128
415[ 0.630059] msm_cpuss_dump soc:cpuss_dump: Data dump setup failed, id = 129
416[ 0.631001] msm_cpuss_dump soc:cpuss_dump: Data dump setup failed, id = 130
417[ 0.631943] msm_cpuss_dump soc:cpuss_dump: Data dump setup failed, id = 131
418[ 0.632880] msm_cpuss_dump soc:cpuss_dump: Data dump setup failed, id = 132
419[ 0.633816] msm_cpuss_dump soc:cpuss_dump: Data dump setup failed, id = 133
420[ 0.634755] msm_cpuss_dump soc:cpuss_dump: Data dump setup failed, id = 134
421[ 0.635692] msm_cpuss_dump soc:cpuss_dump: Data dump setup failed, id = 135
422[ 0.637271] KPI: Bootloader start count = 40260
423[ 0.637290] KPI: Bootloader end count = 79382
424[ 0.637301] KPI: Bootloader display count = 1640571870
425[ 0.637312] KPI: Bootloader load kernel count = 1315
426[ 0.637323] KPI: Kernel MPM timestamp = 113847
427[ 0.637333] KPI: Kernel MPM Clock frequency = 32768
428[ 0.637365] socinfo_print: v0.10, id=207, ver=2.1, raw_id=2368, raw_ver=1, hw_plat=8, hw_plat_ver=65536
429[ 0.637365] accessory_chip=0, hw_plat_subtype=0, pmic_model=65545, pmic_die_revision=131072 foundry_id=0 serial_number=4873782
430[ 0.639054] msm_shared_memory_probe: Unable to unlock heap due to error -22
431[ 0.639087] msm-shared-memory: probe of soc:audio_heap failed with error -22
432[ 0.639402] msm_shared_memory_probe: Unable to unlock heap due to error -22
433[ 0.639423] msm-shared-memory: probe of soc:adsp_heap failed with error -22
434[ 0.641779] bt_vreg: no parameters
435[ 0.642219] usb_otg_vreg: no parameters
436[ 0.642341] reg-fixed-voltage soc:usb-otg-switch: Failed to find supply vin
437[ 0.642463] reg-fixed-voltage soc:usb-otg-switch: Failed to register regulator: -517
438[ 0.643042] vgaarb: loaded
439[ 0.643691] wcd9xxx_intc soc:wcd9xxx-irq: TLMM connect gpio not found
440[ 0.644669] SCSI subsystem initialized
441[ 0.646008] usbcore: registered new interface driver usbfs
442[ 0.646068] usbcore: registered new interface driver hub
443[ 0.646345] usbcore: registered new device driver usb
444[ 0.646567] media: Linux media interface: v0.10
445[ 0.646652] Linux video capture interface: v2.00
446[ 0.690765] cpufreq: driver msm up and running
447[ 0.692321] platform soc:qcom,ion:qcom,ion-heap@8: assigned reserved memory node secure_region
448[ 0.692701] platform soc:qcom,ion:qcom,ion-heap@22: assigned reserved memory node adsp_region
449[ 0.692917] platform soc:qcom,ion:qcom,ion-heap@27: assigned reserved memory node qsecom_region
450[ 0.693137] platform soc:qcom,ion:qcom,ion-heap@28: assigned reserved memory node audio_region
451[ 0.693355] platform soc:qcom,ion:qcom,ion-heap@23: assigned reserved memory node peripheral_region@c800000
452[ 0.693599] ION heap system created
453[ 0.693814] ION heap kmalloc created
454[ 0.693836] ION heap mm created at 0x00000000cd400000 with size 12c00000
455[ 0.693845] ION heap adsp created at 0x00000000c9400000 with size 4000000
456[ 0.693853] ION heap qsecom created at 0x00000000c8000000 with size 1400000
457[ 0.693860] ION heap audio created at 0x00000000c7800000 with size 800000
458[ 0.693867] ION heap pil_1 created at 0x000000000ca00000 with size 1f00000
459[ 0.694134] msm_bus_fabric_init_driver
460[ 0.698495] msm_bus_fabric_init: Skip Fab init for virtual device 6144
461[ 0.706051] msm_bus_dev_init_qos: Skipping QOS init for 10039msm_bus_dev_init_qos: Skipping QOS init for 58
462[ 0.706061] msm_bus_dev_init_qos: Skipping QOS init for 89msm_bus_dev_init_qos: Skipping QOS init for 68
463[ 0.706070] msm_bus_dev_init_qos: Skipping QOS init for 604[ 0.707466] qcom,qpnp-power-on 00-qcom,power-on-0800: PMIC@SID0 Power-on reason: Triggered from PON1 (secondary PMIC) and 'warm' boot
464[ 0.707483] qcom,qpnp-power-on 00-qcom,power-on-0800: PMIC@SID0: Power-off reason: Triggered from PS_HOLD (PS_HOLD/MSM controlled shutdown)
465[ 0.707636] input: qpnp_pon as /devices/virtual/input/input0
466[ 0.708372] pon_spare_reg: no parameters
467[ 0.708424] qcom,qpnp-power-on 02-qcom,power-on-0800: No PON config. specified
468[ 0.708476] qcom,qpnp-power-on 02-qcom,power-on-0800: PMIC@SID2 Power-on reason: Triggered from PON1 (secondary PMIC) and 'warm' boot
469[ 0.708491] qcom,qpnp-power-on 02-qcom,power-on-0800: PMIC@SID2: Power-off reason: Triggered from PS_HOLD (PS_HOLD/MSM controlled shutdown)
470[ 0.708681] PMIC@SID0: PM8994 v2.0 options: 0, 2, 2, 2
471[ 0.708767] PMIC@SID2: PMI8994 v2.0.4 options: 0, 0, 0, 0
472[ 0.709092] ipa ipa2_uc_state_check:296 uC interface not initialized
473[ 0.709100] ipa ipa_sps_irq_control_all:938 EP (2) not allocated.
474[ 0.709105] ipa ipa_sps_irq_control_all:938 EP (5) not allocated.
475[ 0.711459] sps:BAM 0x00000000fd4c4000 is registered.
476[ 0.713040] ipa ipa2_uc_state_check:296 uC interface not initialized
477[ 0.713211] sps:BAM 0x00000000fd4c4000 (va:0xffffff80010a0000) enabled: ver:0x24, number of pipes:20
478[ 0.714736] ipa ipa2_uc_state_check:296 uC interface not initialized
479[ 0.721545] ipa ipa2_uc_state_check:296 uC interface not initialized
480[ 0.723467] IPA driver initialization was successful.
481[ 0.725322] gdsc_venus: no parameters
482[ 0.725561] gdsc_venus_core0: fast normal
483[ 0.725801] gdsc_venus_core1: fast normal
484[ 0.725995] gdsc_venus_core2: fast normal
485[ 0.726305] gdsc_camss_top: no parameters
486[ 0.726533] gdsc_mdss: no parameters
487[ 0.726920] gdsc_jpeg: no parameters
488[ 0.726943] gdsc_jpeg: supplied by gdsc_camss_top
489[ 0.727136] gdsc_vfe: no parameters
490[ 0.727158] gdsc_vfe: supplied by gdsc_camss_top
491[ 0.727423] gdsc_cpp: no parameters
492[ 0.727446] gdsc_cpp: supplied by gdsc_camss_top
493[ 0.727664] gdsc_oxili_gx: no parameters
494[ 0.727705] gdsc_oxili_gx: supplied by pmi8994_s2_corner
495[ 0.727926] gdsc_oxili_cx: no parameters
496[ 0.728093] gdsc_pcie_0: no parameters
497[ 0.728304] gdsc_pcie_1: no parameters
498[ 0.728477] gdsc_usb30: no parameters
499[ 0.728667] gdsc_ufs: no parameters
500[ 0.728922] gdsc_fd: no parameters
501[ 0.730182] mdss_pll_probe: MDSS pll label = MDSS DSI 0 PLL
502[ 0.730829] BUG: Bad page state in process swapper/0 pfn:03400
503[ 0.730840] page:ffffffbac0208000 count:0 mapcount:1 mapping: (null) index:0x0
504[ 0.730847] flags: 0x0()
505[ 0.730860] page dumped because: nonzero mapcount
506[ 0.730875] CPU: 5 PID: 1 Comm: swapper/0 Tainted: G W 3.18.31-g4cb3792 #15
507[ 0.730882] Hardware name: SoMC Ivy-ROW (DT)
508[ 0.730892] Call trace:
509[ 0.730914] [<ffffffc0000899c0>] dump_backtrace+0x0/0x270
510[ 0.730925] [<ffffffc000089c44>] show_stack+0x14/0x1c
511[ 0.730941] [<ffffffc000be6e70>] dump_stack+0x88/0xac
512[ 0.730954] [<ffffffc00016ce04>] bad_page+0xfc/0x124
513[ 0.730961] [<ffffffc00016cf50>] free_pages_prepare+0x124/0x19c
514[ 0.730971] [<ffffffc00016f140>] free_hot_cold_page+0x34/0x19c
515[ 0.730979] [<ffffffc00016f3dc>] __free_pages+0x2c/0x3c
516[ 0.730998] [<ffffffc0008e5178>] mdss_pll_util_resource_parse+0x794/0x81c
517[ 0.731006] [<ffffffc0008e5554>] mdss_pll_probe+0x278/0x864
518[ 0.731022] [<ffffffc0005092e8>] platform_drv_probe+0x38/0x84
519[ 0.731033] [<ffffffc000507920>] driver_probe_device+0x164/0x380
520[ 0.731042] [<ffffffc000507bec>] __driver_attach+0x64/0x90
521[ 0.731052] [<ffffffc000505dc8>] bus_for_each_dev+0x80/0xb0
522[ 0.731061] [<ffffffc000507cd0>] driver_attach+0x20/0x28
523[ 0.731068] [<ffffffc00050672c>] bus_add_driver+0x120/0x1f8
524[ 0.731077] [<ffffffc000508730>] driver_register+0x98/0xe4
525[ 0.731085] [<ffffffc000509d38>] __platform_driver_register+0x60/0x68
526[ 0.731094] [<ffffffc001183d3c>] mdss_pll_driver_init+0x1c/0x48
527[ 0.731115] [<ffffffc00113abb8>] do_one_initcall+0x1a0/0x1bc
528[ 0.731123] [<ffffffc00113ada8>] kernel_init_freeable+0x1d4/0x28c
529[ 0.731133] [<ffffffc000be014c>] kernel_init+0x10/0xdc
530[ 0.731140] Disabling lock debugging due to kernel taint
531[ 0.732776] dsi_pll_clock_register_20nm: Registered DSI PLL clocks successfully
532[ 0.732832] mdss_pll_probe: MDSS pll label = MDSS DSI 1 PLL
533[ 0.734018] dsi_pll_clock_register_20nm: Registered DSI PLL clocks successfully
534[ 0.734065] mdss_pll_probe: MDSS pll label = MDSS HDMI PLL
535[ 0.734075] mdss_pll_probe: Unable to get the cell-index rc=-22
536[ 0.736701] fda64000.qcom,iommu supply qcom,alt-vdd not found, using dummy regulator
537[ 0.737100] msm_iommu fda64000.qcom,iommu: device jpeg_iommu (model: 0) mapped at ffffff80011e0000, with 4 ctx banks
538[ 0.738379] fdc84000.qcom,iommu supply qcom,alt-vdd not found, using dummy regulator
539[ 0.738699] msm_iommu fdc84000.qcom,iommu: device venus_iommu (model: 0) mapped at ffffff8001200000, with 5 ctx banks
540[ 0.740067] msm_iommu fdb10000.qcom,iommu: device kgsl_iommu (model: 0) mapped at ffffff8001220000, with 3 ctx banks
541[ 0.740860] fda44000.qcom,iommu supply qcom,alt-vdd not found, using dummy regulator
542[ 0.741164] msm_iommu_dev_v1: vfe_iommu: Keeping vfe non-secure
543[ 0.741178] msm_iommu fda44000.qcom,iommu: device vfe_iommu (model: 0) mapped at ffffff8001240000, with 3 ctx banks
544[ 0.741919] fd864000.qcom,iommu supply qcom,alt-vdd not found, using dummy regulator
545[ 0.742163] msm_iommu fd864000.qcom,iommu: device fd_iommu (model: 0) mapped at ffffff8001260000, with 3 ctx banks
546[ 0.742881] fda84000.qcom,iommu supply qcom,alt-vdd not found, using dummy regulator
547[ 0.743133] msm_iommu fda84000.qcom,iommu: device cpp_iommu (model: 0) mapped at ffffff8001280000, with 3 ctx banks
548[ 0.743835] fd9cc000.qcom,iommu supply qcom,alt-vdd not found, using dummy regulator
549[ 0.744013] msm_iommu fd9cc000.qcom,iommu: device mdp_iommu (model: 0) mapped at ffffff80012a0000, with 3 ctx banks
550[ 0.746112] msm_iommu_ctx fda6c000.qcom,iommu-ctx: context jpeg_enc0 using bank 0
551[ 0.746266] msm_iommu_ctx fda6d000.qcom,iommu-ctx: context jpeg_enc1 using bank 1
552[ 0.746412] msm_iommu_ctx fda6e000.qcom,iommu-ctx: context jpeg_dec using bank 2
553[ 0.746545] msm_iommu_ctx fda6f000.qcom,iommu-ctx: context jpeg_dma using bank 3
554[ 0.746738] msm_iommu_ctx fdc8c000.qcom,iommu-ctx: context venus_ns using bank 0
555[ 0.746934] msm_iommu_ctx fdc8d000.qcom,iommu-ctx: context venus_sec_bitstream using bank 1
556[ 0.747090] msm_iommu_ctx fdc8e000.qcom,iommu-ctx: context venus_fw using bank 2
557[ 0.747248] msm_iommu_ctx fdc8f000.qcom,iommu-ctx: context venus_sec_pixel using bank 3
558[ 0.747384] msm_iommu_ctx fdc90000.qcom,iommu-ctx: context venus_sec_non_pixel using bank 4
559[ 0.747557] msm_iommu_ctx fdb18000.qcom,iommu-ctx: context gfx3d_user using bank 0
560[ 0.747699] msm_iommu_ctx fdb19000.qcom,iommu-ctx: context gfx3d_priv using bank 1
561[ 0.747873] msm_iommu_ctx fdb1a000.qcom,iommu-ctx: context gfx3d_secure using bank 2
562[ 0.748046] msm_iommu_ctx fda4c000.qcom,iommu-ctx: context vfe using bank 0
563[ 0.748186] msm_iommu_ctx fda4d000.qcom,iommu-ctx: context cpp using bank 1
564[ 0.748335] msm_iommu_ctx fda4e000.qcom,iommu-ctx: context vfe_secure using bank 2
565[ 0.748493] msm_iommu_ctx fd86c000.qcom,iommu-ctx: context camera_fd using bank 0
566[ 0.748626] msm_iommu_ctx fd86d000.qcom,iommu-ctx: context fd_1 using bank 1
567[ 0.748763] msm_iommu_ctx fd86e000.qcom,iommu-ctx: context fd_2 using bank 2
568[ 0.748963] msm_iommu_ctx fda8c000.qcom,iommu-ctx: context cpp_0 using bank 0
569[ 0.749106] msm_iommu_ctx fda8d000.qcom,iommu-ctx: context cpp_1 using bank 1
570[ 0.749272] msm_iommu_ctx fda8e000.qcom,iommu-ctx: context cpp_2 using bank 2
571[ 0.749443] msm_iommu_ctx fd9d4000.qcom,iommu-ctx: context mdp_0 using bank 0
572[ 0.749634] msm_iommu_ctx fd9d5000.qcom,iommu-ctx: context mdp_1 using bank 1
573[ 0.749810] msm_iommu_ctx fd9d6000.qcom,iommu-ctx: context mdp_2 using bank 2
574[ 0.753182] Advanced Linux Sound Architecture Driver Initialized.
575[ 0.753850] Bluetooth: ffffffc00e987cf8
576[ 0.753912] NET: Registered protocol family 31
577[ 0.753922] Bluetooth: ffffffc00e987cf8
578[ 0.753937] Bluetooth: ffffffc00e987cd8Bluetooth: ffffffc00e987ca8
579[ 0.753977] Bluetooth: ffffffc00e987cb8[ 0.754372] cfg80211: Calling CRDA to update world regulatory domain
580[ 0.754401] cfg80211: World regulatory domain updated:
581[ 0.754408] cfg80211: DFS Master region: unset
582[ 0.754416] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
583[ 0.754429] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
584[ 0.754438] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
585[ 0.754445] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A, 2000 mBm), (N/A)
586[ 0.754452] cfg80211: (5170000 KHz - 5250000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A)
587[ 0.754458] cfg80211: (5250000 KHz - 5330000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A)
588[ 0.754465] cfg80211: (5490000 KHz - 5710000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A)
589[ 0.754472] cfg80211: (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A)
590[ 0.754480] cfg80211: (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm), (N/A)
591[ 0.754732] pcie:pcie_init.
592[ 0.759262] fc528000.qcom,pcie supply vreg-3.3 not found, using dummy regulator
593[ 0.759519] fc528000.qcom,pcie supply vreg-cx not found, using dummy regulator
594[ 0.759628] fc528000.qcom,pcie supply gdsc-smmu not found, using dummy regulator
595[ 0.761140] msm_pcie_get_resources: PCIe: RC1 can't get tcsr resource.
596[ 0.763345] ibb_reg: 4600 <--> 6000 mV at 6000 mV
597[ 0.763853] lab_reg: 4600 <--> 6000 mV at 6000 mV
598[ 0.764416] usb_otg_vreg: no parameters
599[ 0.764523] reg-fixed-voltage soc:usb-otg-switch: Failed to find supply vin
600[ 0.764628] reg-fixed-voltage soc:usb-otg-switch: Failed to register regulator: -517
601[ 0.764780] wcd9xxx_intc soc:wcd9xxx-irq: TLMM connect gpio not found
602[ 0.765334] Switched to clocksource arch_sys_counter
603[ 0.798443] bcl_peripheral:bcl_perph_init BCL Initialized
604[ 0.803981] NET: Registered protocol family 2
605[ 0.804594] TCP established hash table entries: 32768 (order: 6, 262144 bytes)
606[ 0.804840] TCP bind hash table entries: 32768 (order: 7, 524288 bytes)
607[ 0.805558] TCP: Hash tables configured (established 32768 bind 32768)
608[ 0.805743] TCP: reno registered
609[ 0.805763] UDP hash table entries: 2048 (order: 4, 65536 bytes)
610[ 0.805828] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
611[ 0.806105] NET: Registered protocol family 1
612[ 0.806519] usb_otg_vreg: no parameters
613[ 0.806635] reg-fixed-voltage soc:usb-otg-switch: Failed to find supply vin
614[ 0.806714] reg-fixed-voltage soc:usb-otg-switch: Failed to register regulator: -517
615[ 0.806824] wcd9xxx_intc soc:wcd9xxx-irq: TLMM connect gpio not found
616[ 0.807244] Trying to unpack rootfs image as initramfs...
617[ 0.873590] Freeing initrd memory: 2304K (ffffffc002000000 - ffffffc002240000)
618[ 0.880849] futex hash table entries: 2048 (order: 6, 262144 bytes)
619[ 0.881020] Initialise system trusted keyring
620[ 0.881100] audit: initializing netlink subsys (disabled)
621[ 0.881194] audit: type=2000 audit(0.879:1): initialized
622[ 0.882000] vmscan: error setting kswapd cpu affinity mask
623[ 0.886771] Registering sdcardfs 0.1
624[ 0.886912] fuse init (API version 7.23)
625[ 0.887158] msgmni has been set to 5388
626[ 0.889938] Key type asymmetric registered
627[ 0.889956] Asymmetric key parser 'x509' registered
628[ 0.890114] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 246)
629[ 0.890127] io scheduler noop registered
630[ 0.890269] io scheduler cfq registered (default)
631[ 0.894071] msm_dss_get_res_byname: 'vbif_nrt_phys' resource not found
632[ 0.894102] mdss_mdp_probe+0x278/0x1318->msm_dss_ioremap_byname: 'vbif_nrt_phys' msm_dss_get_res_byname failed
633[ 0.894757] mdss_mdp_irq_clk_register: unable to get clk: lut_clk
634[ 0.895118] Circ Path 618
635[ 0.895138] register_client_adhoc:Failed to find path.src 1 dest 590
636[ 0.895147] mdss_mdp_bus_scale_register: reg_bus_client register failed
637[ 0.895952] No change in context(0==0), skip
638[ 0.897007] mdss_mdp_pipe_addr_setup: type:0 ftchid:1 xinid:0 num:0 rect:0 ndx:0x1 prio:0
639[ 0.897015] mdss_mdp_pipe_addr_setup: type:0 ftchid:4 xinid:4 num:1 rect:0 ndx:0x2 prio:1
640[ 0.897021] mdss_mdp_pipe_addr_setup: type:0 ftchid:7 xinid:8 num:2 rect:0 ndx:0x4 prio:2
641[ 0.897027] mdss_mdp_pipe_addr_setup: type:0 ftchid:19 xinid:12 num:8 rect:0 ndx:0x100 prio:3
642[ 0.897064] mdss_mdp_pipe_addr_setup: type:1 ftchid:16 xinid:1 num:3 rect:0 ndx:0x8 prio:4
643[ 0.897070] mdss_mdp_pipe_addr_setup: type:1 ftchid:17 xinid:5 num:4 rect:0 ndx:0x10 prio:5
644[ 0.897076] mdss_mdp_pipe_addr_setup: type:1 ftchid:18 xinid:9 num:5 rect:0 ndx:0x20 prio:6
645[ 0.897082] mdss_mdp_pipe_addr_setup: type:1 ftchid:22 xinid:13 num:9 rect:0 ndx:0x200 prio:7
646[ 0.897107] mdss_mdp_pipe_addr_setup: type:2 ftchid:10 xinid:2 num:6 rect:0 ndx:0x40 prio:8
647[ 0.897113] mdss_mdp_pipe_addr_setup: type:2 ftchid:13 xinid:10 num:7 rect:0 ndx:0x80 prio:9
648[ 0.897137] mdss_mdp_pipe_addr_setup: type:3 ftchid:-1 xinid:7 num:10 rect:0 ndx:0x400 prio:0
649[ 0.897143] mdss_mdp_pipe_addr_setup: type:3 ftchid:-1 xinid:7 num:11 rect:0 ndx:0x800 prio:1
650[ 0.897239] mdss_mdp_parse_dt_handler: Error from prop qcom,mdss-ib-factor-overlap : u32 array read
651[ 0.897648] xlog_status: enable:0, panic:1, dump:2
652[ 0.898128] mdss_mdp_probe: mdss version = 0x10090000, bootloader display is off, num 0, intf_sel=0x00000000
653[ 0.902407] mdss_dsi_ctrl_probe: DSI Ctrl name = MDSS DSI CTRL->0
654[ 0.903004] mdss_dsi_config_panel:2895:dsi specific cfg not present
655[ 0.903260] mdss_dsi_panel: mdss_dsi_panel_init: spec_pdata->vsn_gpio=-2 Invalid
656[ 0.903271] mdss_dsi_panel: mdss_dsi_panel_init: spec_pdata->vsp_gpio=-2 Invalid
657[ 0.903428] panel_detect_setup: DriverIC GPIO: 1
658[ 0.903436] do_panel_detect: Starting ADC Panel Detection...
659[ 0.903445] adc_panel_detect: Found panel ADC: 1514394
660[ 0.903634] mdss_panel_parse_dt: Panel Name = 2
661[ 0.903646] mdss_dsi_parse_dcs_cmds: Cannot find property: somc,mdss-dsi-id-read-command
662[ 0.903753] mdss_dsi_panel_timing_from_dt: found new timing "somc,novatek_lgd_1080p_cmd_panel" (ffffffc00e987238)
663[ 0.903765] mdss_dsi_parse_dcs_cmds: Cannot find property: somc,mdss-dsi-early-init-command
664[ 0.903780] mdss_dsi_parse_dcs_cmds: Cannot find property: qcom,mdss-dsi-post-panel-on-command
665[ 0.903788] mdss_dsi_parse_dcs_cmds: Cannot find property: qcom,mdss-dsi-timing-switch-command
666[ 0.903821] mdss_dsi_panel_timing_switch: ndx=0 switching to panel timing "somc,novatek_lgd_1080p_cmd_panel"
667[ 0.903877] mdss_panel_parse_dt:4147, panel physical size not specified
668[ 0.903891] mdss_dsi_parse_dcs_cmds: Cannot find property: somc,mdss-dsi-pre-uv-command
669[ 0.903937] mdss_dsi_parse_dcs_cmds: Cannot find property: somc,mdss-dsi-cabc-early-on-command
670[ 0.903944] mdss_dsi_parse_dcs_cmds: Cannot find property: somc,mdss-dsi-cabc-on-command
671[ 0.903952] mdss_dsi_parse_dcs_cmds: Cannot find property: somc,mdss-dsi-cabc-off-command
672[ 0.903960] mdss_dsi_parse_dcs_cmds: Cannot find property: somc,mdss-dsi-cabc-late-off-command
673[ 0.903991] mdss_dsi_parse_panel_features: partial_update_enabled=0
674[ 0.904001] mdss_dsi_parse_panel_features: ulps feature disabled
675[ 0.904009] mdss_dsi_parse_panel_features: ulps during suspend feature disabled
676[ 0.904017] mdss_dsi_parse_dms_config: dynamic switch feature enabled: 0
677[ 0.904040] mdss_dsi_parse_panel_features:3202, Disp_en gpio not specified
678[ 0.904090] mdss_dsi_parse_dcs_cmds: Cannot find property: qcom,mdss-dsi-post-panel-on-command
679[ 0.904110] mdss_dsi_panel_init:4557 Continuous splash flag not found.
680[ 0.904126] mdss_panel_parse_bl_settings: WLED bkl-trigger registered!
681[ 0.904346] mdss_dsi_parse_gpio_params:4143, TE gpio not specified
682[ 0.904443] mdss_dsi_parse_gpio_params:4176, disp_dcdc_en gpio gpio not specified
683[ 0.904467] mdss_dsi_retrieve_ctrl_resources: phy_regulator_base=ffffff80011f6780 phy_regulator_size=30
684[ 0.904473] mdss_dsi_retrieve_ctrl_resources: ctrl_base=ffffff80011f2000 ctrl_size=260 phy_base=ffffff80011f4500 phy_size=280
685[ 0.904824] dsi_panel_device_register: Continuous splash disabled
686[ 0.905029] mdss_register_panel: adding framebuffer device fd998000.qcom,mdss_dsi_ctrl0
687[ 0.907536] mdss_dsi_ctrl_probe: Dsi Ctrl->0 initialized, DSI rev:0x10030000, PHY rev:0x1
688[ 0.908238] mdss_dsi_status_init: DSI status check interval:5000
689[ 0.908528] mdss_register_panel: adding framebuffer device soc:qcom,mdss_wb_panel
690[ 0.909190] mdss_fb_probe: fb0: split_mode:0 left:0 right:0
691[ 0.909632] mdss_fb_register: FrameBuffer[0] 1080x1920 registered successfully!
692[ 0.917944] mdss_dsi_ctrl fd998000.qcom,mdss_dsi_ctrl0: mipi_dsi_panel_create_debugfs: create folder fd998000.qcom,mdss_dsi_ctrl0
693[ 0.918073] mdss_fb_probe: fb1: split_mode:0 left:0 right:0
694[ 0.918189] mdss_fb_register: FrameBuffer[1] 1920x1080 registered successfully!
695[ 0.918264] mdss_mdp_splash_parse_dt: splash mem child node is not present
696[ 0.921166] Gladiator Error Reporting not available
697[ 0.922659] IPC_RTR: msm_ipc_router_smd_driver_register Already driver registered IPCRTR
698[ 0.925564] msm_rpm_log_probe: OK
699[ 0.927938] subsys-pil-tz fdce0000.qcom,venus: for venus segments only will be dumped.
700[ 0.930052] pil-q6v5-mss fc880000.qcom,mss: Failed to find the pas_id.
701[ 0.932045] uart_tx_gpio is not available
702[ 0.932057] uart_rx_gpio is not available
703[ 0.932066] uart_cts_gpio is not available
704[ 0.932075] uart_rfr_gpio is not available
705[ 0.932082] msm_hs_dt_to_pdata:Out of Band sleep flag is set
706[ 0.932161] Wakeup irq not specified.
707[ 0.932586] sps: BAM device 0x00000000f9944000 is not registered yet.
708[ 0.932837] sps:BAM 0x00000000f9944000 is registered.
709[ 0.934424] f995e000.uart: ttyHS0 at MMIO 0xf995e000 (irq = 11, base_baud = 460800) is a MSM HS UART
710[ 0.936197] msm_serial_hs module loaded
711[ 0.936704] msm_serial_hsl_probe: detected port #0 (ttyHSL0)
712[ 0.936998] f991e000.serial: ttyHSL0 at MMIO 0xf991e000 (irq = 10, base_baud = 460800) is a MSM
713[ 0.938157] msm_hsl_console_setup: console setup on port #0
714[ 5.812241] console [ttyHSL0] enabled
715[ 5.816427] msm_serial_hsl_init: driver initialized
716[ 5.821449] ****** Probing MSM QRNG ******
717[ 5.825204] ****** MSM QRNG Registered!******
718[ 5.836308] GET CL ..............
719[ 5.838602] GET CLOCKS ..............
720[ 5.842449] DEEP NAP ..............
721[ 5.845706] GX RETENTION ..............
722[ 5.849524] BIMC INTERFACE CLK ..............
723[ 5.853878] POWERLEVELS ..............
724[ 5.857867] L2PC CPU MASK ..............
725[ 5.861516] OCMEM BUS NODE ..............
726[ 5.865591] FIND GPUBW ..............
727[ 5.869335] BWVOTE..............
728[ 5.872365] INIT WORK..............
729[ 5.875827] RETURN RESULT..............
730[ 5.880381] _kgsl_iommu_probe: kgsl IOMMU v1 probed!
731[ 5.957164] brd: module loaded
732[ 5.960560] loop: module loaded
733[ 5.962664] Loading pn547 driver
734[ 5.966827] pn547_parse_dt: irq : 29, ven : 1011, firm : 30, pvdd_en : -2
735[ 5.972676] pn547_probe : IRQ num 201
736[ 5.976338] pn547_probe : requesting IRQ 201
737[ 5.991866] i2c-msm-v2 f9924000.i2c: msm_bus_scale_register_client(mstr-id:86):0x11 (ok)
738[ 5.999180] pn547_probe : i2c addr=0x28
739[ 6.002756] pn547_probe : success
740[ 6.006965] QSEECOM: qseecom_probe: qseecom.qsee_version = 0x405000
741[ 6.012327] QSEECOM: qseecom_probe: disk-encrypt-pipe-pair=0x2
742[ 6.017926] QSEECOM: qseecom_probe: file-encrypt-pipe-pair=0x0QSEECOM: qseecom_probe: qsee-ce-hw-instance=0x0
743[ 6.027820] QSEECOM: qseecom_probe: qseecom.appsbl_qseecom_support = 0x0QSEECOM: qseecom_probe: no-clock-support=0x1
744[ 6.038323] QSEECOM: qseecom_probe: qsee reentrancy support phase is not defined, setting to default 0
745[ 6.047805] QSEECOM: qseecom_probe: secure app region addr=0x6500000 size=0x500000
746[ 6.057850] i2c-core: driver [tabla-i2c-core] using legacy suspend method
747[ 6.063784] i2c-core: driver [tabla-i2c-core] using legacy resume method
748[ 6.070509] i2c-core: driver [wcd9xxx-i2c-core] using legacy suspend method
749[ 6.077396] i2c-core: driver [wcd9xxx-i2c-core] using legacy resume method
750[ 6.084318] i2c-core: driver [tasha-i2c-core] using legacy suspend method
751[ 6.091033] i2c-core: driver [tasha-i2c-core] using legacy resume method
752[ 6.098168] QCE50: __qce_get_device_tree_data: BAM Apps EE is not defined, setting to default 1
753[ 6.107012] qce fd440000.qcedev: Qualcomm Crypto 5.3.0 device found @0xfd440000
754[ 6.113701] qce fd440000.qcedev: CE device = 0x0
755[ 6.113701] , IO base, CE = 0xffffff8001cc0000
756[ 6.113701] , Consumer (IN) PIPE 2, Producer (OUT) PIPE 3
757[ 6.113701] IO base BAM = 0x (null)
758[ 6.113701] BAM IRQ 130
759[ 6.113701] Engines Availability = 0x2010853
760[ 6.139586] sps:BAM 0x00000000fd444000 is registered.
761[ 6.144393] sps:BAM 0x00000000fd444000 (va:0xffffff8001450000) enabled: ver:0x24, number of pipes:8
762[ 6.153647] QCE50: qce_sps_init: Qualcomm MSM CE-BAM at 0x00000000fd444000 irq 130
763[ 6.166639] QCE50: __qce_get_device_tree_data: BAM Apps EE is not defined, setting to default 1
764[ 6.174884] qcrypto fd440000.qcrypto1fde: Qualcomm Crypto 5.3.0 device found @0xfd440000
765[ 6.182386] qcrypto fd440000.qcrypto1fde: CE device = 0x0
766[ 6.182386] , IO base, CE = 0xffffff8001dc0000
767[ 6.182386] , Consumer (IN) PIPE 4, Producer (OUT) PIPE 5
768[ 6.182386] IO base BAM = 0x (null)
769[ 6.182386] BAM IRQ 130
770[ 6.182386] Engines Availability = 0x2010853
771[ 6.209161] QCE50: qce_sps_init: Qualcomm MSM CE-BAM at 0x00000000fd444000 irq 130
772[ 6.221370] qcrypto fd440000.qcrypto1fde: qcrypto-ecb-aes
773[ 6.225819] qcrypto fd440000.qcrypto1fde: qcrypto-cbc-aes
774[ 6.231218] qcrypto fd440000.qcrypto1fde: qcrypto-ctr-aes
775[ 6.236576] qcrypto fd440000.qcrypto1fde: qcrypto-ecb-des
776[ 6.242069] qcrypto fd440000.qcrypto1fde: qcrypto-cbc-des
777[ 6.247345] qcrypto fd440000.qcrypto1fde: qcrypto-ecb-3des
778[ 6.252828] qcrypto fd440000.qcrypto1fde: qcrypto-cbc-3des
779[ 6.258282] qcrypto fd440000.qcrypto1fde: qcrypto-xts-aes
780[ 6.263669] qcrypto fd440000.qcrypto1fde: qcrypto-sha1
781[ 6.268783] qcrypto fd440000.qcrypto1fde: qcrypto-sha256
782[ 6.274089] qcrypto fd440000.qcrypto1fde: qcrypto-aead-hmac-sha1-cbc-aes
783[ 6.280768] qcrypto fd440000.qcrypto1fde: qcrypto-aead-hmac-sha1-cbc-des
784[ 6.287442] qcrypto fd440000.qcrypto1fde: qcrypto-aead-hmac-sha1-cbc-3des
785[ 6.294228] qcrypto fd440000.qcrypto1fde: qcrypto-aead-hmac-sha256-cbc-aes
786[ 6.301082] qcrypto fd440000.qcrypto1fde: qcrypto-aead-hmac-sha256-cbc-des
787[ 6.307940] qcrypto fd440000.qcrypto1fde: qcrypto-aead-hmac-sha256-cbc-3des
788[ 6.314889] qcrypto fd440000.qcrypto1fde: qcrypto-hmac-sha1
789[ 6.320439] qcrypto fd440000.qcrypto1fde: qcrypto-hmac-sha256
790[ 6.326161] qcrypto fd440000.qcrypto1fde: qcrypto-aes-ccm
791[ 6.331553] qcrypto fd440000.qcrypto1fde: qcrypto-rfc4309-aes-ccm
792[ 6.337617] QCE50: __qce_get_device_tree_data: BAM Apps EE is not defined, setting to default 1
793[ 6.346736] qcrypto fd3c0000.qcrypto2fde: Qualcomm Crypto 5.3.0 device found @0xfd3c0000
794[ 6.354304] qcrypto fd3c0000.qcrypto2fde: CE device = 0x0
795[ 6.354304] , IO base, CE = 0xffffff8001e40000
796[ 6.354304] , Consumer (IN) PIPE 4, Producer (OUT) PIPE 5
797[ 6.354304] IO base BAM = 0x (null)
798[ 6.354304] BAM IRQ 131
799[ 6.354304] Engines Availability = 0x2010853
800[ 6.380947] sps:BAM 0x00000000fd3c4000 is registered.
801[ 6.385740] sps:BAM 0x00000000fd3c4000 (va:0xffffff8001bb0000) enabled: ver:0x24, number of pipes:8
802[ 6.395014] QCE50: qce_sps_init: Qualcomm MSM CE-BAM at 0x00000000fd3c4000 irq 131
803[ 6.407287] QCE50: __qce_get_device_tree_data: BAM Apps EE is not defined, setting to default 1
804[ 6.415627] qcrypto fd440000.qcrypto1pfe: Qualcomm Crypto 5.3.0 device found @0xfd440000
805[ 6.423031] qcrypto fd440000.qcrypto1pfe: CE device = 0x1
806[ 6.423031] , IO base, CE = 0xffffff8001ec0000
807[ 6.423031] , Consumer (IN) PIPE 0, Producer (OUT) PIPE 1
808[ 6.423031] IO base BAM = 0x (null)
809[ 6.423031] BAM IRQ 130
810[ 6.423031] Engines Availability = 0x2010853
811[ 6.449797] QCE50: qce_sps_init: Qualcomm MSM CE-BAM at 0x00000000fd444000 irq 130
812[ 6.461509] QCE50: __qce_get_device_tree_data: BAM Apps EE is not defined, setting to default 1
813[ 6.469598] qcrypto fd3c0000.qcrypto2pfe: Qualcomm Crypto 5.3.0 device found @0xfd3c0000
814[ 6.477261] qcrypto fd3c0000.qcrypto2pfe: CE device = 0x1
815[ 6.477261] , IO base, CE = 0xffffff8001f80000
816[ 6.477261] , Consumer (IN) PIPE 0, Producer (OUT) PIPE 1
817[ 6.477261] IO base BAM = 0x (null)
818[ 6.477261] BAM IRQ 131
819[ 6.477261] Engines Availability = 0x2010853
820[ 6.504000] QCE50: qce_sps_init: Qualcomm MSM CE-BAM at 0x00000000fd3c4000 irq 131
821[ 6.518979] tun: Universal TUN/TAP device driver, 1.6
822[ 6.523011] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
823[ 6.530975] PPP generic driver version 2.4.2
824[ 6.534274] PPP BSD Compression module registered
825[ 6.538894] PPP Deflate Compression module registered
826[ 6.543953] PPP MPPE Compression module registered
827[ 6.548706] NET: Registered protocol family 24
828[ 6.554833] somc_wifi_init_mem: Wi-Fi static memory allocated
829[ 6.560189] msm_sharedmem: sharedmem_register_qmi: qmi init successful
830[ 6.568964] scm_call failed: func id 0x2000c16, arginfo: 0x1117, args: 0xb6c80000, 0x10, 0xb5665f00, 0xb55a8000, ret: -1, syscall returns: 0x0, 0x0, 0x0
831[ 6.581595] hyp_assign_table: Failed to assign memory protection, ret = -5
832[ 6.588430] msm_sharedmem: setup_shared_ram_perms: hyp_assign_phys failed IPA=0x0160x00000000c4300000 size=1572864 err=-5
833[ 6.599478] msm_sharedmem: msm_sharedmem_probe: Device created for client 'rmtfs'
834[ 6.607656] msm_sharedmem: msm_sharedmem_probe: Device created for client 'rfsa_dsp'
835[ 6.614736] msm_sharedmem: msm_sharedmem_probe: Device created for client 'rfsa_mdm'
836[ 6.622431] msm_sharedmem: msm_sharedmem_probe: Device created for client 'rfsa_sensor'
837[ 6.633080] msm-usb-ssphy-qmp f9b38000.ssphy: Failed getting vls_clamp_reg. Going on.
838[ 6.641843] msm-dwc3 f9200000.ssusb: unable to get dbm device
839[ 6.647771] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
840[ 6.653292] ehci-pci: EHCI PCI platform driver
841[ 6.657712] ehci-msm: Qualcomm On-Chip EHCI Host Controller
842[ 6.663532] usbcore: registered new interface driver usb-storage
843[ 6.669780] gbridge_init: gbridge_init successs.
844[ 6.673970] mousedev: PS/2 mouse device common for all mice
845[ 6.679506] usbcore: registered new interface driver xpad
846[ 6.687195] bu520x1nvx soc:bu520x1nvx: bu520x1nvx_probe: invalid gpio -2
847[ 6.687475] clearpad clearpad: no reset_l2h config
848[ 6.687638] clearpad-rmi-dev clearpad-rmi-dev: Major number of rmidev: 233
849[ 6.687642] clearpad-rmi-dev clearpad-rmi-dev: Allocated rmidev 233 0.
850[ 6.688589] clearpad clearpad: clearpad_vreg_suspend: vdd: set mode (HPM) ok, new mode=2
851[ 6.719076] bu520x1nvx: probe of soc:bu520x1nvx failed with error -22
852[ 6.726067] input: hbtp_vm as /devices/virtual/input/input1
853[ 6.731247] fpc1145_init OK
854[ 6.734313] qcom,qpnp-rtc 00-qcom,pm8994_rtc: rtc core: registered qpnp_rtc as rtc0
855[ 6.741652] i2c /dev entries driver
856[ 6.746256] msm_vidc: err: Failed to read firmware name: -22
857[ 6.750985] msm_vidc: err: Failed to get platform resources
858[ 6.756605] msm_vidc: err: Failed to init core
859[ 6.761136] msm_vidc_v4l2: probe of fdc00000.qcom,vidc failed with error -22
860[ 6.771019] msm_tspp_probe: vdd_cx regulator will not be used
861[ 6.778809] gspca_main: v2.14.0 registered
862[ 6.783528] FG: fg_probe: FG Probe success - FG Revision DIG:2.1 ANA:1.2 PMIC subtype=10
863[ 6.792510] qpnp_vadc_probe: QPNP VADC init OK
864[ 6.796248] qpnp_vadc_probe: QPNP VADC init OK
865[ 6.829781] device-mapper: uevent: version 1.0.3
866[ 6.833528] device-mapper: ioctl: 4.28.0-ioctl (2014-09-17) initialised: dm-devel@redhat.com
867[ 6.841922] device-mapper: req-crypt: dm-req-crypt successfully initalized.
868[ 6.841922]
869[ 6.850212] Bluetooth: ffffffc00e987c98
870[ 6.855344] Bluetooth: bluesleep_probe: bluesleep in pinctl mode
871[ 6.860605] Bluetooth: ffffffc00e987aa8
872[ 6.864142] Bluetooth: ffffffc00e987aa8[ 6.868423] sdhci: Secure Digital Host Controller Interface driver
873[ 6.874122] sdhci: Copyright(c) Pierre Ossman
874[ 6.878452] sdhci-pltfm: SDHCI platform and OF driver helper
875[ 6.884827] sdhci_msm f9824900.sdhci: sdhci_msm_probe: ICE device is not enabled
876[ 6.894340] sdhci_msm f9824900.sdhci: No vmmc regulator found
877[ 6.899049] sdhci_msm f9824900.sdhci: No vqmmc regulator found
878[ 6.905200] mmc0: SDHCI controller on f9824900.sdhci [f9824900.sdhci] using 32-bit ADMA in legacy mode
879[ 6.943234] sdhci_msm f98a4900.sdhci: sdhci_msm_probe: ICE device is not enabled
880[ 6.952533] sdhci_msm f98a4900.sdhci: No vmmc regulator found
881[ 6.957239] sdhci_msm f98a4900.sdhci: No vqmmc regulator found
882[ 6.963395] mmc1: SDHCI controller on f98a4900.sdhci [f98a4900.sdhci] using 32-bit ADMA in legacy mode
883[ 7.004663] hidraw: raw HID events driver (C) Jiri Kosina
884[ 7.010198] usbcore: registered new interface driver usbhid
885[ 7.014728] usbhid: USB HID core driver
886[ 7.018810] ashmem: initialized
887[ 7.021794] logger: created 256K log 'log_main'
888[ 7.024745] mmc0: Out-of-interrupt timeout is 100[ms]
889[ 7.024748] mmc0: BKOPS_EN equals 0x3
890[ 7.024753] mmc0: eMMC FW version: 0x02
891[ 7.024756] mmc0: cache barrier support 1 flush policy 1
892[ 7.031560] mmc0: new HS200 MMC card at address 0001
893[ 7.031951] sdhci_msm_pm_qos_cpu_init (): voted for group #0 (mask=0xf) latency=301 (0xffffffc0b1c85280)
894[ 7.032076] mmcblk0: mmc0:0001 032G74 29.1 GiB
895[ 7.032236] mmcblk0rpmb: mmc0:0001 032G74 partition 3 4.00 MiB
896[ 7.035436] mmcblk0: p1 p2 p3 p4 p5 p6 p7 p8 p9 p10 p11 p12 p13 p14 p15 p16 p17 p18 p19 p20 p21 p22 p23 p24 p25 p26 p27 p28 p29 p30 p31 p32 p33 p34 p35 p36 p37 p38 p39 p40 p41 p42 p43
897[ 7.085232] logger: created 256K log 'log_events'
898[ 7.089897] logger: created 256K log 'log_radio'
899[ 7.090352] i2c-msm-v2 f9928000.i2c: msm_bus_scale_register_client(mstr-id:86):0x1b (ok)
900[ 7.102576] logger: created 256K log 'log_system'
901[ 7.107675] qpnp_coincell_charger_show_state: enabled=Y, voltage=3200 mV, resistance=2100 ohm
902[ 7.120807] bimc-bwmon fc388000.qcom,cpu-bwmon: BW HWmon governor registered.
903[ 7.127077] bimc-bwmon fc390000.qcom,gpu-bwmon: BW HWmon governor registered.
904[ 7.137920] devfreq soc:qcom,cpubw: Couldn't update frequency transition information.
905[ 7.144816] devfreq soc:qcom,mincpubw: Couldn't update frequency transition information.
906[ 7.153610] probe: Version mismatch expected 0x20000 got 0x0
907[ 7.158761] usbcore: registered new interface driver snd-usb-audio
908[ 7.171471] msm-compr-dsp soc:qcom,msm-compr-dsp: msm_compr_probe: dev name soc:qcom,msm-compr-dsp
909[ 7.179617] msm-pcm-lpa soc:qcom,msm-pcm-lpa: msm_pcm_probe: dev name soc:qcom,msm-pcm-lpa
910[ 7.192119] msm8994-pinctrl fd510000.pinctrl: could not parse property pins
911[ 7.198109] msm8994-asoc-snd fe034000.sound: msm8994_asoc_machine_probe: hdmi audio support present
912[ 7.209043] msm8994-asoc-snd fe034000.sound: ASoC: platform (null) not registered
913[ 7.215741] u32 classifier
914[ 7.218171] Actions configured
915[ 7.221592] Netfilter messages via NETLINK v0.30.
916[ 7.226274] nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
917[ 7.232536] ctnetlink v0.93: registering with nfnetlink.
918[ 7.237985] xt_time: kernel timezone is -0000
919[ 7.242138] ip_tables: (C) 2000-2006 Netfilter Core Team
920[ 7.247329] arp_tables: (C) 2002 David S. Miller
921[ 7.251887] TCP: cubic registered
922[ 7.255156] Initializing XFRM netlink socket
923[ 7.259587] NET: Registered protocol family 10
924[ 7.264370] mip6: Mobile IPv6
925[ 7.266797] ip6_tables: (C) 2000-2006 Netfilter Core Team
926[ 7.272259] sit: IPv6 over IPv4 tunneling driver
927[ 7.276992] NET: Registered protocol family 17
928[ 7.281217] NET: Registered protocol family 15
929[ 7.285648] bridge: automatic filtering via arp/ip/ip6tables has been deprecated. Update your scripts to load br_netfilter if you need this.
930[ 7.298226] Bridge firewalling registered
931[ 7.302209] Ebtables v2.0 registered
932[ 7.305882] Bluetooth: ffffffc00e987cc8
933[ 7.309408] Bluetooth: ffffffc00e987ca8Bluetooth: ffffffc00e987ce8
934[ 7.315574] Bluetooth: ffffffc00e987cc8Bluetooth: ffffffc00e987cc8
935[ 7.321741] Bluetooth: ffffffc00e987ca8Bluetooth: ffffffc00e987d18
936[ 7.327896] Bluetooth: ffffffc00e987cf8[ 7.331743] l2tp_core: L2TP core driver, V2.0
937[ 7.336061] l2tp_ppp: PPPoL2TP kernel driver, V2.0
938[ 7.340840] l2tp_ip: L2TP IP encapsulation support (L2TPv3)
939[ 7.346396] l2tp_netlink: L2TP netlink interface
940[ 7.351006] l2tp_eth: L2TP ethernet pseudowire support (L2TPv3)
941[ 7.356895] l2tp_debugfs: L2TP debugfs support
942[ 7.361324] l2tp_ip6: L2TP IP encapsulation support for IPv6 (L2TPv3)
943[ 7.368321] NET: Registered protocol family 27
944[ 7.373436] usb_otg_vreg: no parameters
945[ 7.376270] reg-fixed-voltage soc:usb-otg-switch: Failed to find supply vin
946[ 7.383224] reg-fixed-voltage soc:usb-otg-switch: Failed to register regulator: -517
947[ 7.391078] wcd9xxx_intc soc:wcd9xxx-irq: TLMM connect gpio not found
948[ 7.398138] subsys-pil-tz fe200000.qcom,lpass: for adsp segments only will be dumped.
949[ 7.405974] pil-q6v5-mss fc880000.qcom,mss: Failed to find the pas_id.
950[ 7.412031] pil-q6v5-mss fc880000.qcom,mss: for modem segments only will be dumped.
951[ 7.421936] qpnp-smbcharger 02-qcom,qpnp-smbcharger: node /soc/qcom,spmi@fc4c0000/qcom,pmi8994@2/qcom,qpnp-smbcharger IO resource absent!
952[ 7.433375] smbcharger_charger_otg: no parameters
953[ 7.438003] smbcharger_external_otg: no parameters
954[ 7.442729] smbcharger_external_otg: supplied by pmi8994_boost_5v
955[ 7.480402] msm-dwc3 f9200000.ssusb: dwc3_msm_power_set_property_usb: clear retry count=0
956[ 7.490588] qpnp-smbcharger 02-qcom,qpnp-smbcharger: node /soc/qcom,spmi@fc4c0000/qcom,pmi8994@2/qcom,qpnp-smbcharger IO resource absent!
957[ 7.514882] msm-usb-hsphy f92f8800.hsphy: set phy param for peripheral value=0x00fbdfa7
958[ 7.522377] msm-usb-hsphy f92f8800.hsphy: set phy param for peripheral value=0x00fbdfa7
959[ 7.531051] msm-usb-hsphy f92f8800.hsphy: set phy param for peripheral value=0x00fbdfa7
960[ 7.539775] qpnp-smbcharger 02-qcom,qpnp-smbcharger: SMBCHG successfully probe Charger version=SCHG Revision DIG:2.0 ANA:1.1 batt=1 dc=0 usb=1
961[ 7.552894] msm8994-pinctrl fd510000.pinctrl: could not parse property pins
962[ 7.558886] msm8994-asoc-snd fe034000.sound: msm8994_asoc_machine_probe: hdmi audio support present
963[ 7.569940] msm8994-asoc-snd fe034000.sound: ASoC: CODEC DAI tomtom_vifeedback not registered
964[ 7.577615] usb_otg_vreg: no parameters
965[ 7.581276] usb_otg_vreg: supplied by smbcharger_external_otg
966[ 7.587050] wcd9xxx_intc soc:wcd9xxx-irq: TLMM connect gpio not found
967[ 7.593978] msm8994-pinctrl fd510000.pinctrl: could not parse property pins
968[ 7.600061] i2c-msm-v2 f9928000.i2c: TIMEOUT_ERROR(val:510msec) misconfigured GPIO or slave pulling bus line(s) low
969[ 7.600061] : msgs(n:2 cur:0 tx) bc(rx:1 tx:1) mode:FIFO slv_addr:0x2c MSTR_STS:0x00132100 OPER:0x00000010
970[ 7.620458] msm8994-asoc-snd fe034000.sound: msm8994_asoc_machine_probe: hdmi audio support present
971[ 7.631440] msm8994-asoc-snd fe034000.sound: ASoC: CODEC DAI tomtom_vifeedback not registered
972[ 7.639717] Registered cp15_barrier emulation handler
973[ 7.643995] Registered setend emulation handler
974[ 7.648655] Loading compiled-in X.509 certificates
975[ 7.653289] Problem loading in-kernel X.509 certificate (-65)
976[ 7.658983] registered taskstats version 1
977[ 7.665673] scm_call failed: func id 0x2001601, arginfo: 0x12, args: 0xc402b000, 0x8, 0x0, 0x0, ret: -1, syscall returns: 0x0, 0x0, 0x0
978[ 7.677940] wcd9xxx_intc soc:wcd9xxx-irq: TLMM connect gpio not found
979[ 7.683978] msm8994-pinctrl fd510000.pinctrl: could not parse property pins
980[ 7.690448] msm8994-asoc-snd fe034000.sound: msm8994_asoc_machine_probe: hdmi audio support present
981[ 7.701387] msm8994-asoc-snd fe034000.sound: ASoC: CODEC DAI tomtom_vifeedback not registered
982[ 7.709639] wcd9xxx_intc soc:wcd9xxx-irq: TLMM connect gpio not found
983[ 7.709878] otg_wakelock_init: No USB transceiver found
984[ 7.710030] i2c-msm-v2 f9928000.i2c: bus lines held low by a slave detected
985[ 7.710033] i2c-msm-v2 f9928000.i2c: Executing bus recovery procedure (9 clk pulse)
986[ 7.710332] file system registered
987[ 7.710360] mbim_init: initialize 1 instances
988[ 7.710392] mbim_init: Initialized 1 ports
989[ 7.711081] rndis_qc_init: initialize rndis QC instance
990[ 7.711188] Number of LUNs=8
991[ 7.711193] Mass Storage Function, version: 2009/09/11
992[ 7.711195] LUN: removable file: (no medium)
993[ 7.711203] Number of LUNs=1
994[ 7.711225] LUN: removable file: (no medium)
995[ 7.711226] Number of LUNs=1
996[ 7.711353] android_usb gadget: android_usb ready
997[ 7.712314] input: gpio-keys as /devices/soc/soc:gpio_keys/input/input2
998[ 7.715296] qcom,qpnp-rtc 00-qcom,pm8994_rtc: setting system clock to 1970-01-01 00:01:14 UTC (74)
999[ 7.716754] msm_core_tsens_init: Cannot read tsens scaling factor
1000[ 7.716816] msm_core_tsens_init: Cannot read tsens scaling factor
1001[ 7.716872] msm_core_tsens_init: Cannot read tsens scaling factor
1002[ 7.716927] msm_core_tsens_init: Cannot read tsens scaling factor
1003[ 7.716984] msm_core_tsens_init: Cannot read tsens scaling factor
1004[ 7.717040] msm_core_tsens_init: Cannot read tsens scaling factor
1005[ 7.717097] msm_core_tsens_init: Cannot read tsens scaling factor
1006[ 7.717154] msm_core_tsens_init: Cannot read tsens scaling factor
1007[ 7.718902] lmh_lite:lmh_parse_sensor Registering sensor:[LLM_IA57]
1008[ 7.719087] lmh_lite:lmh_parse_sensor Registering sensor:[THRM_57-0]
1009[ 7.719278] lmh_lite:lmh_parse_sensor Registering sensor:[THRM_57-1]
1010[ 7.719418] lmh_lite:lmh_parse_sensor Registering sensor:[THRM_57-2]
1011[ 7.719555] lmh_lite:lmh_parse_sensor Registering sensor:[THRM_57-3]
1012[ 7.719729] lmh_lite:lmh_parse_sensor Registering sensor:[THRM_53-0]
1013[ 7.719864] lmh_lite:lmh_parse_sensor Registering sensor:[THRM_53-1]
1014[ 7.719994] lmh_lite:lmh_parse_sensor Registering sensor:[THRM_53-2]
1015[ 7.720134] lmh_lite:lmh_parse_sensor Registering sensor:[THRM_53-3]
1016[ 7.720286] f9117000.qcom,lmh supply vdd-apss not found, using dummy regulator
1017[ 7.720311] lmh_lite:lmh_get_sensor_devicetree Error getting ODCM thresh. err:-22
1018[ 7.720505] lmh_lite:lmh_check_tz_debug_cmds SCM cmd:8 not available
1019[ 7.720507] lmh_lite:lmh_probe LMH debug init failed. err:-19
1020[ 7.721125] parse_cpu_levels: idx 1 298
1021[ 7.721126] parse_cpu_levels: idx 2 2360
1022[ 7.721128] parse_cpu_levels: idx 3 1630
1023[ 7.721129] parse_cpu_levels: idx 2 31225
1024[ 7.721130] parse_cpu_levels: idx 3 2517
1025[ 7.721131] parse_cpu_levels: idx 3 1082
1026[ 7.721239] parse_cpu_levels: idx 1 537
1027[ 7.721240] parse_cpu_levels: idx 2 2611
1028[ 7.721241] parse_cpu_levels: idx 3 3053
1029[ 7.721242] parse_cpu_levels: idx 2 4455
1030[ 7.721243] parse_cpu_levels: idx 3 4883
1031[ 7.721244] parse_cpu_levels: idx 3 6808
1032[ 7.729002] qcom,qpnp-flash-led 03-qcom,leds-d300: Unable to acquire pinctrl
1033[ 7.730243] rmnet_ipa started initialization
1034[ 7.730245] IPA SSR support = True
1035[ 7.730246] IPA ipa-loaduC = True
1036[ 7.730248] IPA SG support = False
1037[ 7.731855] ipa ipa_sps_irq_control_all:938 EP (5) not allocated.
1038[ 7.731858] ipa ipa2_uc_state_check:301 uC is not loaded
1039[ 7.732783] rmnet_ipa completed initialization
1040[ 7.735511] qcom,cc-debug-8994 fc401880.qcom,cc-debug: Registered debug mux.
1041[ 7.735533] i2c-msm-v2 f9928000.i2c: Bus recovery fail after 10 retries
1042[ 7.735559] clearpad-i2c 6-002c: clearpad_i2c_read: rc = -110
1043[ 7.735565] clearpad clearpad: failed clearpad initialization
1044[ 7.735760] usb_otg_vreg: disabling
1045[ 7.735795] bt_vreg: disabling
1046[ 7.735799] mem_acc1_corner: disabling
1047[ 7.735800] mem_acc0_corner: disabling
1048[ 7.735808] pm8994_l31: disabling
1049[ 7.735854] regulator_proxy_consumer_remove_all: removing regulator proxy consumer requests
1050[ 7.736077] clock_late_init: Removing enables held for handed-off clocks
1051[ 7.742441] ALSA device list:
1052[ 7.742442] No soundcards found.
1053[ 7.800077] clearpad-i2c 6-002c: clearpad_i2c_probâ–’[ 8.080409] Freeing unused kernel memory: 488K (ffffffc00113a000 - ffffffc0011b4000)
1054[ 8.081406] msm8994-pinctrl fd510000.pinctrl: could not parse property pins
1055[ 8.081483] msm8994-asoc-snd fe034000.sound: msm8994_asoc_machine_probe: hdmi audio support present
1056[ 8.083589] msm8994-asoc-snd fe034000.sound: ASoC: CODEC DAI tomtom_vifeedback not registered
1057[ 8.083763] clearpad clearpad: no reset_l2h config
1058[ 8.084450] clearpad clearpad: clearpad_vreg_suspend: vdd: set mode (HPM) ok, new mode=2
1059[ 8.124466] Freeing alternatives memory: 28K (ffffffc0011b4000 - ffffffc0011bb000)
1060__bionic_open_tzdata_path: ANDROID_DATA not set!
1061__bionic_open_tzdata_path: ANDROID_ROOT not set!
1062[ 8.643149] msm_thermal:devmgr_client_cpufreq_update Frequency mitigation task is not initialized
1063[ 8.651001] msm_thermal:devmgr_client_cpufreq_update Frequency mitigation task is not initialized
1064[ 8.659837] msm_thermal:devmgr_client_cpufreq_update Frequency mitigation task is not initialized
1065[ 8.668699] msm_thermal:devmgr_client_cpufreq_update Frequency mitigation task is not initialized
1066[ 8.677563] msm_thermal:devmgr_client_hotplug_update Hotplug task is not initialized
1067[ 8.770068] msm_thermal:devmgr_client_cpufreq_update Frequency mitigation task is not initialized
1068[ 8.777902] msm_thermal:devmgr_client_hotplug_update Hotplug task is not initialized
1069[ 8.785643] msm_thermal:devmgr_client_cpufreq_update Frequency mitigation task is not initialized
1070[ 8.794489] msm_thermal:devmgr_client_cpufreq_update Frequency mitigation task is not initialized
1071[ 8.803343] msm_thermal:devmgr_client_cpufreq_update Frequency mitigation task is not initialized
1072ANDROID! format...
1073Offset: 9015296
1074Size: 6583682
1075[ 9.000067] i2c-msm-v2 f9928000.i2c: TIMEOUT_ERROR(val:510msec) misconfigured GPIO or slave pulling bus line(s) low
1076[ 9.000067] : msgs(n:2 cur:0 tx) bc(rx:1 tx:1) mode:FIFO slv_addr:0x2c MSTR_STS:0x00132100 OPER:0x00000010
1077Original size: 6583682, gunzipped: 10549248
1078Copying '/dev/block/mmcblk0p32' to '/sbin/ramdisk-recovery.cpio'
1079Finished writing file: '/sbin/ramdisk-recovery.cpio'
1080Uncompressed ramdisk written to '/sbin/ramdisk-recovery.cpio'.
1081cpio: acct: File exists
1082cpio: cache: File exists
1083cpio: config: File exists
1084cpio: data: File exists
1085cpio: dev: File exists
1086cpio: fstab.ivy: File exists
1087cpio: mnt: File exists
1088cpio: oem: File exists
1089cpio: proc: File exists
1090cpio: res: File exists
1091cp[ 9.120038] i2c-msm-v2 f9928000.i2c: bus lines held low by a slave detected
1092[ 9.130220] i2c-msm-v2 f9928000.i2c: Executing bus recovery procedure (9 clk pulse)
1093io: sbin: File exists
1094cpio: mkpath 'sbin/init_sony': File exists
1095cpio: mkpath 'sbin/keycheck': File exists
1096cpio: mkpath 'sbin/toybox_init': File exists
1097cpio: storage: File exists
1098cpio: sys: File exists
1099cpio: system: File exists
1100[ 9.163310] i2c-msm-v2 f9928000.i2c: Bus recovery fail after 10 retries
1101[ 9.168905] clearpad-i2c 6-002c: clearpad_i2c_read: rc = -110
1102[ 9.174627] clearpad clearpad: failed clearpad initialization
1103[ 9.190253] init: init first stage started!
1104[ 9.200692] SELinux: Class can_socket not defined in policy.
1105[ 9.205402] SELinux: the above unknown classes and permissions will be allowed
1106[ 9.240176] wcd9xxx_intc soc:wcd9xxx-irq: TLMM connect gpio not found
1107[ 9.252653] audit: type=1403 audit(76.029:2): policy loaded auid=4294967295 ses=4294967295
1108[ 9.260307] init: (Initializing SELinux non-enforcing took 0.07s.)
1109[ 9.268317] init: init second stage started!
1110[ 9.274972] init: Running restorecon...
1111[ 9.407467] init: waitpid failed: No child processes
1112[ 9.412153] init: (Loading properties from /default.prop took 0.00s.)
1113[ 9.418435] init: (Parsing /init.recovery.ivy.rc took 0.00s.)
1114[ 9.423595] init: (Parsing /init.rc took 0.01s.)
1115[ 9.428224] init: Starting service 'ueventd'...
1116[ 9.433076] init: Starting service 'healthd'...
1117[ 9.434074] ueventd: ueventd started!
1118[ 9.441227] init: Waiting for /dev/.coldboot_done...
1119[ 9.441597] msm_thermal:devmgr_client_cpufreq_update Frequency mitigation task is not initialized
1120[ 9.441600] msm_thermal:devmgr_client_cpufreq_update Frequency mitigation task is not initialized
1121[ 9.441602] msm_thermal:devmgr_client_cpufreq_update Frequency mitigation task is not initialized
1122[ 9.441605] msm_thermal:devmgr_client_cpufreq_update Frequency mitigation task is not initialized
1123[ 9.441722] msm_thermal:devmgr_client_hotplug_update Hotplug task is not initialized
1124[ 9.443876] audit: type=1400 audit(76.219:3): avc: denied { write } for pid=383 comm="healthd" name="/" dev="tmpfs" ino=15389 scontext=u:r:healthd:s0 tcontext=u:object_r:device:s0 tclass=dir permissive=1
1125[ 9.443894] audit: type=1400 audit(76.219:4): avc: denied { mknod } for pid=383 comm="healthd" capability=27 scontext=u:r:healthd:s0 tcontext=u:r:healthd:s0 tclass=capability permissive=1
1126[ 9.443911] audit: type=1400 audit(76.219:5): avc: denied { add_name } for pid=383 comm="healthd" name="__kmsg__" scontext=u:r:healthd:s0 tcontext=u:object_r:device:s0 tclass=dir permissive=1
1127[ 9.443944] audit: type=1400 audit(76.219:6): avc: denied { create } for pid=383 comm="healthd" name="__kmsg__" scontext=u:r:healthd:s0 tcontext=u:object_r:device:s0 tclass=chr_file permissive=1
1128[ 9.443984] audit: type=1400 audit(76.219:7): avc: denied { write } for pid=383 comm="healthd" name="__kmsg__" dev="tmpfs" ino=163 scontext=u:r:healthd:s0 tcontext=u:object_r:device:s0 tclass=chr_file permissive=1
1129[ 9.444006] audit: type=1400 audit(76.219:8): avc: denied { open } for pid=383 comm="healthd" path="/dev/__kmsg__" dev="tmpfs" ino=163 scontext=u:r:healthd:s0 tcontext=u:object_r:device:s0 tclass=chr_file permissive=1
1130[ 9.444032] audit: type=1400 audit(76.219:9): avc: denied { remove_name } for pid=383 comm="healthd" name="__kmsg__" dev="tmpfs" ino=163 scontext=u:r:healthd:s0 tcontext=u:object_r:device:s0 tclass=dir permissive=1
1131[ 9.444047] audit: type=1400 audit(76.219:10): avc: denied { unlink } for pid=383 comm="healthd" name="__kmsg__" dev="tmpfs" ino=163 scontext=u:r:healthd:s0 tcontext=u:object_r:device:s0 tclass=chr_file permissive=1
1132[ 9.444055] healthd: BatteryCycleCountPath not found
1133[ 9.490049] msm-dwc3 f9200000.ssusb: detect FLOATED, retry=1
1134[ 9.490831] healthd: battery l=50 v=3887 t=25.0 h=2 st=3 c=579 fc=0 chg=
1135[ 9.491422] healthd: battery l=50 v=3887 t=25.0 h=2 st=3 c=579 fc=0 chg=
1136[ 9.510963] healthd: battery l=50 v=3887 t=25.0 h=2 st=3 c=579 fc=0 chg=
1137[ 9.511583] healthd: battery l=50 v=3887 t=25.0 h=2 st=3 c=579 fc=0 chg=
1138[ 9.544243] healthd: battery l=50 v=3887 t=25.0 h=2 st=3 c=579 fc=0 chg=
1139[ 9.566762] healthd: battery l=50 v=3887 t=25.0 h=2 st=3 c=579 fc=0 chg=
1140[ 9.569217] healthd: battery l=50 v=3887 t=25.0 h=2 st=3 c=579 fc=0 chg=
1141[ 9.575077] healthd: battery l=50 v=3887 t=25.0 h=2 st=3 c=579 fc=0 chg=
1142[ 9.724911] ueventd: Coldboot took 0.29s.
1143[ 9.730775] init: Waiting for /dev/.coldboot_done took 0.29s.
1144[ 9.735681] msm_rng:Data not available!
1145[ 9.750181] msm_rng:Data not available!
1146[ 9.771463] msm_rng:Data not available!
1147[ 9.790169] msm_rng:Data not available!
1148[ 9.810471] enable_store: android_usb: already disabled
1149[ 9.814882] init: (Loading properties from /system/build.prop took 0.00s.)
1150[ 9.821550] init: (Loading properties from /vendor/build.prop took 0.00s.)
1151[ 9.828383] init: (Loading properties from /factory/factory.prop took 0.00s.)
1152[ 9.835642] init: error opening block device /dev/block/bootdevice/by-name/FOTAKernel: No such file or directory
1153[ 9.845958] init: Starting service 'recovery'...
1154[ 9.850769] init: Starting service 'adbd'...
1155[ 9.856454] read descriptors
1156[ 9.858303] read strings
1157[ 9.863122] dwc3 f9200000.dwc3: Set Endpoint Configuration command timeout for ep0out
1158[ 9.869913] dwc3 f9200000.dwc3: set_ep_config() failed for ep0out
1159[ 9.875991] dwc3 f9200000.dwc3: failed to enable ep0out
1160[ 9.960095] msm_thermal:devmgr_client_cpufreq_update Frequency mitigation task is not initialized
1161[ 9.967935] msm_thermal:devmgr_client_cpufreq_update Frequency mitigation task is not initialized
1162[ 9.976816] msm_thermal:devmgr_client_hotplug_update Hotplug task is not initialized
1163[ 9.984532] msm_thermal:devmgr_client_cpufreq_update Frequency mitigation task is not initialized
1164[ 9.993378] msm_thermal:devmgr_client_cpufreq_update Frequency mitigation task is not initialized
1165[ 10.700382] of_batterydata_get_best_profile: 1288-9125 found
1166[ 11.623088] FG: fg_batt_profile_init: Battery profile not same, clearing data
1167[ 15.231916] healthd: battery l=63 v=3885 t=25.0 h=2 st=3 c=482 fc=0 chg=
1168[ 15.238098] healthd: battery l=63 v=3885 t=25.0 h=2 st=3 c=482 fc=0 chg=
1169[ 18.210767] FG: fg_batt_profile_init: Battery SOC: 63, V: 3885475uV
1170[ 18.216922] healthd: battery l=63 v=3885 t=25.0 h=2 st=3 c=482 fc=3035000 chg=
1171[ 18.223745] healthd: battery l=63 v=3885 t=25.0 h=2 st=3 c=482 fc=3035000 chg=
1172[ 29.897892] pll_20nm_vco_init_lock: DSI PLL init lock failed
1173[ 29.902603] dsi_pll_enable: DSI PLL failed to lock
1174[ 29.907290] mdss-dsi-clk:[dsi_link_clk_prepare] dsi_link_clk_prepare: Failed to prepare dsi byte clk
1175[ 29.916444] mdss-dsi-clk:[dsi_link_clk_start] failed to prepare link clks, rc = -22
1176[ 29.924075] mdss-dsi-clk:[dsi_update_clk_state] failed to start link clk rc= -22
1177[ 29.931431] mdss-dsi-clk:[dsi_recheck_clk_state] failed to update clock state, rc = -22
1178[ 29.939407] mdss-dsi-clk:[mdss_dsi_clk_req_state] Failed to adjust clock state rc = -22
1179[ 29.947401] mdss_dsi_clk_ctrl: failed set clk state, rc = -22
1180[ 30.006673] mdss_dsi_panel_pcc_setup: (2052):ct=255 area=0 ud=30 vd=30 r=0x00008000 g=0x00008000 b=0x00008000
1181[ 30.046277] mdss_dsi_panel_on: ctrl=ffffffc0b57f2018 ndx=0
1182[ 30.052551] mdss-dsi-clk:[mdss_dsi_clk_req_state] Core refcount is zero for dsi_clk_client
1183[ 30.059600] mdss-dsi-clk:[mdss_dsi_clk_req_state] Link refcount is zero for dsi_clk_client[ 30.153957] mdss_dsi_panel_off: ctrl=ffffffc0b57f2018 ndx=0
1184[ 30.519514] mdss_dsi_panel_on: ctrl=ffffffc0b57f2018 ndx=0
1185[ 30.521214] mdss-dsi-clk:[mdss_dsi_clk_req_state] Core refcount is zero for dsi_clk_client
1186[ 30.521214] mdss-dsi-clk:[mdss_dsi_clk_req_state] Link refcount is zero for dsi_clk_client
1187[ 30.585310] mdss-dsi-clk:[mdss_dsi_clk_req_state] Core refcount is zero for dsi_clk_clientmdss-dsi-clk:[mdss_dsi_clk_req_state] Link refcount is zero for dsi_clk_clientmdss-dsi-clk:[mdss_dsi_clk_req_state] Core refcount is zero for dsi_clk_client[ 30.618756] msm_thermal:devmgr_client_cpufreq_update Frequency mitigation task is not initialized
1188[ 30.618759] msm_thermal:devmgr_client_cpufreq_update Frequency mitigation task is not initialized
1189[ 30.618761] msm_thermal:devmgr_client_cpufreq_update Frequency mitigation task is not initialized
1190[ 30.618763] msm_thermal:devmgr_client_cpufreq_update Frequency mitigation task is not initialized
1191[ 30.618777] msm_thermal:devmgr_client_hotplug_update Hotplug task is not initialized
1192
1193[ 30.667348] mdss-dsi-clk:[mdss_dsi_clk_req_state] Link refcount is zero for dsi_clk_clientmdss-dsi-clk:[mdss_dsi_clk_req_state] Core refcount is zero for dsi_clk_client
1194[ 31.018823] mdss-dsi-clk:[mdss_dsi_clk_req_state] Link refcount is zero for dsi_clk_client
1195[ 31.065949] audit: type=1400 audit(97.839:11): avc: denied { open } for pid=385 comm="recovery" path="/dev/__properties__/u:object_r:adbtcpes_prop:s0" dev="tmpfs" ino=15396 scontext=u:r:recovery:s0 tcontext=u:object_r:adbtcpes_prop:s0 tclass=file permissive=1
1196[ 31.088696] audit: type=1400 audit(97.869:12): avc: denied { getattr } for pid=385 comm="recovery" path="/dev/__properties__/u:object_r:adbtcpes_prop:s0" dev="tmpfs" ino=15396 scontext=u:r:recovery:s0 tcontext=u:object_r:adbtcpes_prop:s0 tclass=file permissive=1
1197[ 31.091337] mdss-dsi-clk:[mdss_dsi_clk_req_state] Core refcount is zero for dsi_clk_client
1198[ 31.120420] mdss-dsi-clk:[mdss_dsi_clk_req_state] Link refcount is zero for dsi_clk_client
1199[ 31.120421] audit: type=1400 audit(97.899:13): avc: denied { open } for pid=385 comm="recovery" path="/dev/__properties__/u:object_r:sys_pad_prop:s0" dev="tmpfs" ino=15397 scontext=u:r:recovery:s0 tcontext=u:object_r:sys_pad_prop:s0 tclass=file permissive=1
1200[ 31.151625] audit: type=1400 audit(97.929:14): avc: denied { getattr } for pid=385 comm="recovery" path="/dev/__properties__/u:object_r:sys_pad_prop:s0" dev="tmpfs" ino=15397 scontext=u:r:recovery:s0 tcontext=u:object_r:sys_pad_prop:s0 tclass=file permissive=1
1201[ 31.174940] audit: type=1400 audit(97.949:15): avc: denied { open } for pid=385 comm="recovery" path="/dev/__properties__/u:object_r:timekeep_prop:s0" dev="tmpfs" ino=15398 scontext=u:r:recovery:s0 tcontext=u:object_r:timekeep_prop:s0 tclass=file permissive=1
1202[ 31.198065] audit: type=1400 audit(97.979:16): avc: denied { getattr } for pid=385 comm="recovery" path="/dev/__properties__/u:object_r:timekeep_prop:s0" dev="tmpfs" ino=15398 scontext=u:r:recovery:s0 tcontext=u:object_r:timekeep_prop:s0 tclass=file permissive=1
1203[ 31.221561] audit: type=1400 audit(97.999:17): avc: denied { open } for pid=385 comm="recovery" path="/dev/__properties__/u:object_r:tee_prop:s0" dev="tmpfs" ino=15399 scontext=u:r:recovery:s0 tcontext=u:object_r:tee_prop:s0 tclass=file permissive=1
1204[ 31.243811] audit: type=1400 audit(98.029:18): avc: denied { getattr } for pid=385 comm="recovery" path="/dev/__properties__/u:object_r:tee_prop:s0" dev="tmpfs" ino=15399 scontext=u:r:recovery:s0 tcontext=u:object_r:tee_prop:s0 tclass=file permissive=1
1205[ 31.266401] audit: type=1400 audit(98.039:19): avc: denied { open } for pid=385 comm="recovery" path="/dev/__properties__/u:object_r:boot_animation_prop:s0" dev="tmpfs" ino=15400 scontext=u:r:recovery:s0 tcontext=u:object_r:boot_animation_prop:s0 tclass=file permissive=1
1206[ 31.290623] audit: type=1400 audit(98.069:20): avc: denied { getattr } for pid=385 comm="recovery" path="/dev/__properties__/u:object_r:boot_animation_prop:s0" dev="tmpfs" ino=15400 scontext=u:r:recovery:s0 tcontext=u:object_r:boot_animation_prop:s0 tclass=file permissive=1
1207[ 31.318817] mdss-dsi-clk:[mdss_dsi_clk_req_state] Core refcount is zero for dsi_clk_client
1208[ 31.318817] mdss-dsi-clk:[mdss_dsi_clk_req_state] Link refcount is zero for dsi_clk_client
1209[ 31.382303] mdss-dsi-clk:[mdss_dsi_clk_req_state] Core refcount is zero for dsi_clk_clientmdss-dsi-clk:[mdss_dsi_clk_req_state] Link refcount is zero for dsi_clk_clientmdss-dsi-clk:[mdss_dsi_clk_req_state] Core refcount is zero for dsi_clk_client
1210[ 31.448557] mdss-dsi-clk:[mdss_dsi_clk_req_state] Link refcount is zero for dsi_clk_client
1211[ 31.448558] mdss-dsi-clk:[mdss_dsi_clk_req_state] Core refcount is zero for dsi_clk_client
1212[ 31.481694] mdss-dsi-clk:[mdss_dsi_clk_req_state] Link refcount is zero for dsi_clk_client
1213[ 31.488922] mdss-dsi-clk:[mdss_dsi_clk_req_state] Core refcount is zero for dsi_clk_client
1214[ 31.566789] mdss-dsi-clk:[mdss_dsi_clk_req_state] Link refcount is zero for dsi_clk_client
1215[ 31.566789] mdss_mdp_overlay_release: Unable to unset pipe(s) ndx=0x8 unset=0x0
1216[ 31.583095] mdss-dsi-clk:[mdss_dsi_clk_req_state] Core refcount is zero for dsi_clk_client
1217[ 31.590160] mdss-dsi-clk:[mdss_dsi_clk_req_state] Link refcount is zero for dsi_clk_client[ 31.620081] msm_thermal:devmgr_client_cpufreq_update Frequency mitigation task is not initialized
1218[ 31.627920] msm_thermal:devmgr_client_hotplug_update Hotplug task is not initialized
1219[ 31.632563] mdss_dsi_panel_off: ctrl=ffffffc0b57f2018 ndx=0
1220[ 31.641219] msm_thermal:devmgr_client_cpufreq_update Frequency mitigation task is not initialized
1221[ 31.650074] msm_thermal:devmgr_client_cpufreq_update Frequency mitigation task is not initialized
1222[ 31.658904] msm_thermal:devmgr_client_cpufreq_update Frequency mitigation task is not initialized
1223[ 31.900279] init: Service 'recovery' (pid 385) killed by signal 11
1224[ 31.905429] init: Service 'recovery' (pid 385) killing any children in process group
1225[ 31.913219] init: Untracked pid 386 exited with status 1
1226[ 31.918471] init: Starting service 'recovery'...