· 6 years ago · Apr 15, 2019, 10:24 AM
1/ # dmesg
2[ 0.000000] Booting Linux on physical CPU 0x0
3[ 0.000000] Initializing cgroup subsys cpuset
4[ 0.000000] Initializing cgroup subsys cpu
5[ 0.000000] Initializing cgroup subsys cpuacct
6[ 0.000000] Initializing cgroup subsys schedtune
7[ 0.000000] Linux version 4.4.78-perf+ (marco@marco-MS-7A62) (Android clang version 5.0.300080 (based on LLVM 5.0.300080)) #5 SMP PREEMPT Sun Apr 14 12:22:05 CEST 2019
8[ 0.000000] Boot CPU: AArch64 Processor [51af8014]
9[ 0.000000] Machine: Qualcomm Technologies, Inc. SDM 636 PM660 + PM660L MTP WHYRED
10[ 0.000000] ramoops: msm_reserve_ramoops_memory addr=a0000000, size=400000
11[ 0.000000] ramoops: msm_reserve_ramoops_memory record_size=0, ftrace_size=0
12[ 0.000000] Reserved memory: reserved region for node 'wlan_msa_guard@85600000': base 0x0000000085600000, size 1 MiB
13[ 0.000000] Reserved memory: reserved region for node 'wlan_msa_mem@85700000': base 0x0000000085700000, size 1 MiB
14[ 0.000000] Reserved memory: reserved region for node 'removed_regions@85800000': base 0x0000000085800000, size 55 MiB
15[ 0.000000] Reserved memory: reserved region for node 'modem_fw_region@8ac00000': base 0x000000008ac00000, size 126 MiB
16[ 0.000000] Reserved memory: reserved region for node 'adsp_fw_region@92a00000': base 0x0000000092a00000, size 30 MiB
17[ 0.000000] Reserved memory: reserved region for node 'pil_mba_region@94800000': base 0x0000000094800000, size 2 MiB
18[ 0.000000] Reserved memory: reserved region for node 'splash_region@9d400000': base 0x000000009d400000, size 36 MiB
19[ 0.000000] Reserved memory: reserved region for node 'buffer_region@94a00000': base 0x0000000094a00000, size 1 MiB
20[ 0.000000] Reserved memory: allocated memory for 'adsp_region' node: base 0x00000000ff400000, size 8 MiB
21[ 0.000000] Reserved memory: created CMA memory pool at 0x00000000ff400000, size 8 MiB
22[ 0.000000] Reserved memory: initialized node adsp_region, compatible id shared-dma-pool
23[ 0.000000] Reserved memory: allocated memory for 'venus_fw_region' node: base 0x000000009f800000, size 8 MiB
24[ 0.000000] Reserved memory: created CMA memory pool at 0x000000009f800000, size 8 MiB
25[ 0.000000] Reserved memory: initialized node venus_fw_region, compatible id shared-dma-pool
26[ 0.000000] Reserved memory: allocated memory for 'linux,cma' node: base 0x00000000fc800000, size 44 MiB
27[ 0.000000] Reserved memory: created CMA memory pool at 0x00000000fc800000, size 44 MiB
28[ 0.000000] Reserved memory: initialized node linux,cma, compatible id shared-dma-pool
29[ 0.000000] Reserved memory: allocated memory for 'secure_region' node: base 0x00000000f6c00000, size 92 MiB
30[ 0.000000] Reserved memory: created CMA memory pool at 0x00000000f6c00000, size 92 MiB
31[ 0.000000] Reserved memory: initialized node secure_region, compatible id shared-dma-pool
32[ 0.000000] Reserved memory: allocated memory for 'qseecom_region' node: base 0x00000000f5800000, size 20 MiB
33[ 0.000000] Reserved memory: created CMA memory pool at 0x00000000f5800000, size 20 MiB
34[ 0.000000] Reserved memory: initialized node qseecom_region, compatible id shared-dma-pool
35[ 0.000000] Removed memory: created DMA memory pool at 0x0000000085600000, size 1 MiB
36[ 0.000000] Reserved memory: initialized node wlan_msa_guard@85600000, compatible id removed-dma-pool
37[ 0.000000] Removed memory: created DMA memory pool at 0x0000000085700000, size 1 MiB
38[ 0.000000] Reserved memory: initialized node wlan_msa_mem@85700000, compatible id removed-dma-pool
39[ 0.000000] Removed memory: created DMA memory pool at 0x0000000085800000, size 55 MiB
40[ 0.000000] Reserved memory: initialized node removed_regions@85800000, compatible id removed-dma-pool
41[ 0.000000] Removed memory: created DMA memory pool at 0x000000008ac00000, size 126 MiB
42[ 0.000000] Reserved memory: initialized node modem_fw_region@8ac00000, compatible id removed-dma-pool
43[ 0.000000] Removed memory: created DMA memory pool at 0x0000000092a00000, size 30 MiB
44[ 0.000000] Reserved memory: initialized node adsp_fw_region@92a00000, compatible id removed-dma-pool
45[ 0.000000] Removed memory: created DMA memory pool at 0x0000000094800000, size 2 MiB
46[ 0.000000] Reserved memory: initialized node pil_mba_region@94800000, compatible id removed-dma-pool
47[ 0.000000] Removed memory: created DMA memory pool at 0x0000000094a00000, size 1 MiB
48[ 0.000000] Reserved memory: initialized node buffer_region@94a00000, compatible id removed-dma-pool
49[ 0.000000] On node 0 totalpages: 986304
50[ 0.000000] DMA zone: 7328 pages used for memmap
51[ 0.000000] DMA zone: 0 pages reserved
52[ 0.000000] DMA zone: 468992 pages, LIFO batch:31
53[ 0.000000] Normal zone: 8083 pages used for memmap
54[ 0.000000] Normal zone: 517312 pages, LIFO batch:31
55[ 0.000000] psci: probing for conduit method from DT.
56[ 0.000000] psci: PSCIv1.0 detected in firmware.
57[ 0.000000] psci: Using standard PSCI v0.2 function IDs
58[ 0.000000] psci: MIGRATE_INFO_TYPE not supported.
59[ 0.000000] psci: Initializing psci_cpu_init
60[ 0.000000] psci: Initializing psci_cpu_init
61[ 0.000000] psci: Initializing psci_cpu_init
62[ 0.000000] psci: Initializing psci_cpu_init
63[ 0.000000] psci: Initializing psci_cpu_init
64[ 0.000000] psci: Initializing psci_cpu_init
65[ 0.000000] psci: Initializing psci_cpu_init
66[ 0.000000] PERCPU: Embedded 21 pages/cpu @ffffffc8fa158000 s47808 r8192 d30016 u86016
67[ 0.000000] pcpu-alloc: s47808 r8192 d30016 u86016 alloc=21*4096
68[ 0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 [0] 4 [0] 5 [0] 6 [0] 7
69[ 0.000000] CPU features: enabling workaround for Kryo2xx Silver erratum 845719
70[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 970893
71[ 0.000000] Kernel command line: ramoops_memreserve=4M rcupdate.rcu_expedited=1 console=ttyMSM0,115200,n8 androidboot.console=ttyMSM0 earlycon=msm_serial_dm,0xc170000 androidboot.hardware=qcom audit=0 selinux=0 user_debug=31 msm_rtb.filter=0x37 ehci-hcd.park=3 lpm_levels.sleep_disabled=1 sched_enable_hmp=1 sched_enable_power_aware=1 service_locator.enable=1 swiotlb=1 androidboot.configfs=true androidboot.usbcontroller=a800000.dwc3 bootmode=debug root=/dev/mmcblk0p61 androidboot.verifiedbootstate=orange androidboot.keymaster=1 androidboot.veritymode=enforcing androidboot.bootdevice=c0c4000.sdhci androidboot.serialno=42e53afe androidboot.hwc=Global androidboot.hwversion=1.21.0 androidboot.hwlevel=MP androidboot.hwdefined=2 androidboot.baseband=sdm mdss_mdp.panel=1:dsi:0:qcom,mdss_dsi_td4310_tianma_fhd_video:config0:1:none:cfg:single_dsi androidboot.fpsensor=fpc androidboot.secureboot=1
72[ 0.000000] audit: disabled (until reboot)
73[ 0.000000] log_buf_len individual max cpu contribution: 131072 bytes
74[ 0.000000] log_buf_len total cpu_extra contributions: 917504 bytes
75[ 0.000000] log_buf_len min size: 1048576 bytes
76[ 0.000000] log_buf_len: 2097152 bytes
77[ 0.000000] early log buf free: 1041536(99%)
78[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
79[ 0.000000] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
80[ 0.000000] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
81[ 0.000000] software IO TLB [mem 0xfffbf000-0xfffff000] (0MB) mapped at [ffffffc87ffbf000-ffffffc87fffefff]
82[ 0.000000] Memory: 3601876K/3945216K available (17918K kernel code, 3915K rwdata, 10208K rodata, 10240K init, 5518K bss, 167212K reserved, 176128K cma-reserved)
83[ 0.000000] Virtual kernel memory layout:
84[ 0.000000] modules : 0xffffff8000000000 - 0xffffff8008000000 ( 128 MB)
85[ 0.000000] vmalloc : 0xffffff8008000000 - 0xffffffbdbfff0000 ( 246 GB)
86[ 0.000000] .init : 0xffffff8393600000 - 0xffffff8394000000 ( 10240 KB)
87[ 0.000000] .text : 0xffffff8391a80000 - 0xffffff8392c00000 ( 17920 KB)
88[ 0.000000] .rodata : 0xffffff8392c00000 - 0xffffff8393600000 ( 10240 KB)
89[ 0.000000] .data : 0xffffff8394000000 - 0xffffff83943d2c90 ( 3916 KB)
90[ 0.000000] vmemmap : 0xffffffbdc0000000 - 0xffffffbfc0000000 ( 8 GB maximum)
91[ 0.000000] 0xffffffbde0000000 - 0xffffffbde3f93000 ( 63 MB actual)
92[ 0.000000] fixed : 0xffffffbffe7fd000 - 0xffffffbffec00000 ( 4108 KB)
93[ 0.000000] PCI I/O : 0xffffffbffee00000 - 0xffffffbfffe00000 ( 16 MB)
94[ 0.000000] memory : 0xffffffc800000000 - 0xffffffc8fe4c0000 ( 4068 MB)
95[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
96[ 0.000000] HMP scheduling enabled.
97[ 0.000000] Preemptible hierarchical RCU implementation.
98[ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
99[ 0.000000]
100[ 0.000000] **********************************************************
101[ 0.000000] ** NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE **
102[ 0.000000] ** **
103[ 0.000000] ** trace_printk() being used. Allocating extra memory. **
104[ 0.000000] ** **
105[ 0.000000] ** This means that this is a DEBUG kernel and it is **
106[ 0.000000] ** unsafe for production use. **
107[ 0.000000] ** **
108[ 0.000000] ** If you see this message and you are not debugging **
109[ 0.000000] ** the kernel, report this immediately to your vendor! **
110[ 0.000000] ** **
111[ 0.000000] ** NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE **
112[ 0.000000] **********************************************************
113[ 0.000000] NR_IRQS:64 nr_irqs:64 0
114[ 0.000000] mpm_init_irq_domain(): Cannot find irq controller for qcom,gpio-parent
115[ 0.000000] MPM 1 irq mapping errored -517
116[ 0.000000] Offload RCU callbacks from all CPUs
117[ 0.000000] Offload RCU callbacks from CPUs: 0-7.
118[ 0.000000] Architected cp15 and mmio timer(s) running at 19.20MHz (virt/virt).
119[ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x46d987e47, max_idle_ns: 440795202767 ns
120[ 0.000003] sched_clock: 56 bits at 19MHz, resolution 52ns, wraps every 4398046511078ns
121[ 0.000016] clocksource: Switched to clocksource arch_sys_counter
122[ 0.001275] Console: colour dummy device 80x25
123[ 0.001289] Calibrating delay loop (skipped), value calculated using timer frequency.. 38.40 BogoMIPS (lpj=192000)
124[ 0.001297] pid_max: default: 32768 minimum: 301
125[ 0.001345] Security Framework initialized
126[ 0.001352] SELinux: Initializing.
127[ 0.001391] SELinux: Starting in permissive mode
128[ 0.001417] Mount-cache hash table entries: 8192 (order: 4, 65536 bytes)
129[ 0.001425] Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes)
130[ 0.001889] Initializing cgroup subsys memory
131[ 0.001910] Initializing cgroup subsys freezer
132[ 0.002271] /cpus/cpu@0: Missing clock-frequency property
133[ 0.002279] /cpus/cpu@1: Missing clock-frequency property
134[ 0.002286] /cpus/cpu@2: Missing clock-frequency property
135[ 0.002294] /cpus/cpu@3: Missing clock-frequency property
136[ 0.002302] /cpus/cpu@100: Missing clock-frequency property
137[ 0.002311] /cpus/cpu@101: Missing clock-frequency property
138[ 0.002322] /cpus/cpu@102: Missing clock-frequency property
139[ 0.002332] /cpus/cpu@103: Missing clock-frequency property
140[ 0.002337] CPU0: update cpu_capacity 1024
141[ 0.002372] ASID allocator initialised with 65536 entries
142[ 0.022467] MSM Memory Dump base table set up
143[ 0.022490] MSM Memory Dump apps data table set up
144[ 0.028047] CPU1: update cpu_capacity 1024
145[ 0.028104] CPU1: Booted secondary processor [51af8014]
146[ 0.033198] CPU2: update cpu_capacity 1024
147[ 0.033242] CPU2: Booted secondary processor [51af8014]
148[ 0.038294] CPU3: update cpu_capacity 1024
149[ 0.038338] CPU3: Booted secondary processor [51af8014]
150[ 0.043658] CPU4: update cpu_capacity 1024
151[ 0.043720] CPU4: Booted secondary processor [51af8002]
152[ 0.048867] CPU5: update cpu_capacity 1024
153[ 0.048923] CPU5: Booted secondary processor [51af8002]
154[ 0.054065] CPU6: update cpu_capacity 1024
155[ 0.054123] CPU6: Booted secondary processor [51af8002]
156[ 0.059255] CPU7: update cpu_capacity 1024
157[ 0.059313] CPU7: Booted secondary processor [51af8002]
158[ 0.059425] Brought up 8 CPUs
159[ 0.059456] SMP: Total of 8 processors activated.
160[ 0.059462] CPU features: detected feature: GIC system register CPU interface
161[ 0.059786] CPU: All CPU(s) started at EL1
162[ 0.059833] alternatives: patching kernel code
163[ 0.060608] devtmpfs: initialized
164[ 0.117168] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
165[ 0.117193] futex hash table entries: 2048 (order: 5, 131072 bytes)
166[ 0.125281] ramoops: msm_register_ramoops_device
167[ 0.125392] pinctrl core: initialized pinctrl subsystem
168[ 0.126270] NET: Registered protocol family 16
169[ 0.128092] schedtune: init normalization constants...
170[ 0.128098] schedtune: disabled!
171[ 0.129133] console [pstore-1] enabled
172[ 0.129360] pstore: Registered ramoops as persistent store backend
173[ 0.129373] ramoops: attached 0x400000@0xa0000000, ecc: 0/0
174[ 0.130013] cpuidle: using governor ladder
175[ 0.130086] cpuidle: using governor menu
176[ 0.130128] cpuidle: using governor qcom
177[ 0.131268] vdso: 2 pages (1 code @ ffffff8392c06000, 1 data @ ffffff8394004000)
178[ 0.131974] DMA: preallocated 256 KiB pool for atomic allocations
179[ 0.134424] exit: IPA_USB init success!
180[ 0.148830] unable to find DT imem DLOAD mode node
181[ 0.150123] unable to find DT imem EDLOAD mode node
182[ 0.151858] spmi spmi-0: PMIC arbiter version v3 (0x30000000)
183[ 0.157337] LCDB: qpnp_lcdb_regulator_probe: Failed to parse dt rc=-517
184[ 0.158478] msm_watchdog 17817000.qcom,wdt: wdog absent resource not present
185[ 0.158854] msm_watchdog 17817000.qcom,wdt: MSM Watchdog Initialized
186[ 0.159168] sps:sps is ready.
187[ 0.160631] msm-thermal soc:qcom,msm-thermal: probe_psm:Failed reading node=/soc/qcom,msm-thermal, key=qcom,pmic-sw-mode-temp. err=-22. KTM continues
188[ 0.160738] msm_thermal:vdd_restriction_reg_init Defer regulator vdd-dig probe
189[ 0.160750] msm_thermal:probe_vdd_rstr Err regulator init. err:-517. KTM continues.
190[ 0.160766] msm-thermal soc:qcom,msm-thermal: probe_vdd_rstr:Failed reading node=/soc/qcom,msm-thermal, key=qcom,max-freq-level. err=-517. KTM continues
191[ 0.163187] gpu-sdm660 5065000.clock-controller: Registered GPU RBCPR clocks
192[ 0.166491] irq: no irq domain found for /soc/pinctrl@03000000 !
193[ 0.168457] platform soc:qcom,msm-adsprpc-mem: assigned reserved memory node adsp_region
194[ 0.172065] msm_rpm_dev_probe: APSS-RPM communication over GLINK
195[ 0.172197] msm_rpm_trans_notify_state: glink config params: transport=(null), edge=rpm, name=rpm_requests
196[ 0.189103] pm660l_l7: supplied by pm660_l10
197[ 0.193708] platform cce0000.qcom,venus: assigned reserved memory node venus_fw_region
198[ 0.194942] platform 15700000.qcom,lpass: assigned reserved memory node adsp_fw_region@92a00000
199[ 0.195377] platform 4080000.qcom,mss: assigned reserved memory node modem_fw_region@8ac00000
200[ 0.197990] msm-sn-fuse 786134.snfuse: SN interface initialized
201[ 0.206408] msm_mpm_dev_probe(): Cannot get clk resource for XO: -517
202[ 0.207129] genirq: Setting trigger mode 8 for irq 94 failed (gic_set_type+0x0/0xac)
203[ 0.207178] genirq: Setting trigger mode 8 for irq 95 failed (gic_set_type+0x0/0xac)
204[ 0.207223] genirq: Setting trigger mode 8 for irq 96 failed (gic_set_type+0x0/0xac)
205[ 0.207266] genirq: Setting trigger mode 8 for irq 97 failed (gic_set_type+0x0/0xac)
206[ 0.207308] genirq: Setting trigger mode 8 for irq 98 failed (gic_set_type+0x0/0xac)
207[ 0.214612] __of_mpm_init(): MPM driver mapping exists
208[ 0.215244] i2c-msm-v2 c175000.i2c: probing driver i2c-msm-v2
209[ 0.215379] i2c-msm-v2 c175000.i2c: error on clk_get(core_clk):-517
210[ 0.215395] i2c-msm-v2 c175000.i2c: error probe() failed with err:-517
211[ 0.215906] i2c-msm-v2 c176000.i2c: probing driver i2c-msm-v2
212[ 0.216019] i2c-msm-v2 c176000.i2c: error on clk_get(core_clk):-517
213[ 0.216034] i2c-msm-v2 c176000.i2c: error probe() failed with err:-517
214[ 0.216577] i2c-msm-v2 c1b6000.i2c: probing driver i2c-msm-v2
215[ 0.216691] i2c-msm-v2 c1b6000.i2c: error on clk_get(core_clk):-517
216[ 0.216706] i2c-msm-v2 c1b6000.i2c: error probe() failed with err:-517
217[ 0.230708] irq: no irq domain found for /soc/qcom,mdss_mdp@c900000 !
218[ 0.234627] LCDB: qpnp_lcdb_regulator_probe: Failed to parse dt rc=-517
219[ 0.235012] msm-thermal soc:qcom,msm-thermal: probe_psm:Failed reading node=/soc/qcom,msm-thermal, key=qcom,pmic-sw-mode-temp. err=-22. KTM continues
220[ 0.235240] msm_thermal:vdd_restriction_reg_init Defer regulator vdd-gfx probe
221[ 0.235247] msm_thermal:probe_vdd_rstr Err regulator init. err:-517. KTM continues.
222[ 0.235255] msm-thermal soc:qcom,msm-thermal: probe_vdd_rstr:Failed reading node=/soc/qcom,msm-thermal, key=qcom,max-freq-level. err=-517. KTM continues
223[ 0.239098] qcom-clk-smd-rpm soc:qcom,rpmcc: Registered RPM clocks
224[ 0.242041] gcc-sdm660 100000.clock-controller: Registered GCC clocks
225[ 0.248187] mmcc-sdm660 c8c0000.clock-controller: Registered MMSS clocks
226[ 0.249577] cpr4_sdm660_mmss_read_fuse_data: gfx_corner: CPR fusing revision = 0
227[ 0.249733] cpr4_sdm660_mmss_calculate_open_loop_voltages: gfx_corner: fuse_corner[0] open-loop= 585000 uV
228[ 0.249740] cpr4_sdm660_mmss_calculate_open_loop_voltages: gfx_corner: fuse_corner[1] open-loop= 645000 uV
229[ 0.249746] cpr4_sdm660_mmss_calculate_open_loop_voltages: gfx_corner: fuse_corner[2] open-loop= 725000 uV
230[ 0.249752] cpr4_sdm660_mmss_calculate_open_loop_voltages: gfx_corner: fuse_corner[3] open-loop= 790000 uV
231[ 0.249758] cpr4_sdm660_mmss_calculate_open_loop_voltages: gfx_corner: fuse_corner[4] open-loop= 870000 uV
232[ 0.249764] cpr4_sdm660_mmss_calculate_open_loop_voltages: gfx_corner: fuse_corner[5] open-loop= 925000 uV
233[ 0.249896] cpr3_regulator_init_ctrl: gfx: Default CPR mode = open-loop
234[ 0.251425] cprh_kbss_read_fuse_data: apc0_pwrcl_corner: speed bin = 3
235[ 0.251459] cprh_sdm660_kbss_read_fuse_data: apc0_pwrcl_corner: CPR fusing revision = 2
236[ 0.251600] cprh_kbss_calculate_open_loop_voltages: apc0_pwrcl_corner: fused LowSVS: open-loop= 614000 uV
237[ 0.251623] cprh_kbss_calculate_open_loop_voltages: apc0_pwrcl_corner: fused SVS: open-loop= 634000 uV
238[ 0.251642] cprh_kbss_calculate_open_loop_voltages: apc0_pwrcl_corner: fused SVSPLUS: open-loop= 688000 uV
239[ 0.251661] cprh_kbss_calculate_open_loop_voltages: apc0_pwrcl_corner: fused NOM: open-loop= 758000 uV
240[ 0.251678] cprh_kbss_calculate_open_loop_voltages: apc0_pwrcl_corner: fused TURBO_L1: open-loop= 908000 uV
241[ 0.251775] cprh_kbss_calculate_target_quotients: apc0_pwrcl_corner: fused LowSVS: quot[ 7]= 331
242[ 0.251797] cprh_kbss_calculate_target_quotients: apc0_pwrcl_corner: fused SVS: quot[ 7]= 365, quot_offset[ 7]= 30
243[ 0.251820] cprh_kbss_calculate_target_quotients: apc0_pwrcl_corner: fused SVSPLUS: quot[ 7]= 453, quot_offset[ 7]= 85
244[ 0.251841] cprh_kbss_calculate_target_quotients: apc0_pwrcl_corner: fused NOM: quot[ 7]= 575, quot_offset[ 7]= 120
245[ 0.251861] cprh_kbss_calculate_target_quotients: apc0_pwrcl_corner: fused TURBO_L1: quot[ 7]= 809, quot_offset[ 7]= 230
246[ 0.253258] cpr3_regulator_init_ctrl: apc0: Default CPR mode = full HW closed-loop
247[ 0.254447] cprh_kbss_read_fuse_data: apc1_perfcl_corner: speed bin = 3
248[ 0.254477] cprh_sdm660_kbss_read_fuse_data: apc1_perfcl_corner: CPR fusing revision = 2
249[ 0.254615] cprh_kbss_calculate_open_loop_voltages: apc1_perfcl_corner: fused SVS: open-loop= 684000 uV
250[ 0.254638] cprh_kbss_calculate_open_loop_voltages: apc1_perfcl_corner: fused SVSPLUS: open-loop= 718000 uV
251[ 0.254657] cprh_kbss_calculate_open_loop_voltages: apc1_perfcl_corner: fused NOM: open-loop= 788000 uV
252[ 0.254677] cprh_kbss_calculate_open_loop_voltages: apc1_perfcl_corner: fused TURBO: open-loop= 878000 uV
253[ 0.254771] cprh_kbss_calculate_target_quotients: apc1_perfcl_corner: fused SVS: quot[ 7]= 537
254[ 0.254793] cprh_kbss_calculate_target_quotients: apc1_perfcl_corner: fused SVSPLUS: quot[ 7]= 601, quot_offset[ 7]= 60
255[ 0.254815] cprh_kbss_calculate_target_quotients: apc1_perfcl_corner: fused NOM: quot[ 7]= 750, quot_offset[ 7]= 145
256[ 0.254836] cprh_kbss_calculate_target_quotients: apc1_perfcl_corner: fused TURBO: quot[ 7]= 912, quot_offset[ 7]= 160
257[ 0.256111] cpr3_regulator_init_ctrl: apc1: Default CPR mode = full HW closed-loop
258[ 0.258083] i2c-msm-v2 c175000.i2c: probing driver i2c-msm-v2
259[ 0.258397] AXI: msm_bus_scale_register_client(): msm_bus_scale_register_client: Bus driver not ready.
260[ 0.258425] i2c-msm-v2 c175000.i2c: msm_bus_scale_register_client(mstr-id:86):0 (not a problem)
261[ 0.259230] AXI: msm_bus_scale_register_client(): msm_bus_scale_register_client: Bus driver not ready.
262[ 0.260404] i2c-msm-v2 c176000.i2c: probing driver i2c-msm-v2
263[ 0.260706] AXI: msm_bus_scale_register_client(): msm_bus_scale_register_client: Bus driver not ready.
264[ 0.260732] i2c-msm-v2 c176000.i2c: msm_bus_scale_register_client(mstr-id:86):0 (not a problem)
265[ 0.261496] AXI: msm_bus_scale_register_client(): msm_bus_scale_register_client: Bus driver not ready.
266[ 0.262493] i2c-msm-v2 c1b6000.i2c: probing driver i2c-msm-v2
267[ 0.262793] AXI: msm_bus_scale_register_client(): msm_bus_scale_register_client: Bus driver not ready.
268[ 0.262821] i2c-msm-v2 c1b6000.i2c: msm_bus_scale_register_client(mstr-id:84):0 (not a problem)
269[ 0.263671] AXI: msm_bus_scale_register_client(): msm_bus_scale_register_client: Bus driver not ready.
270[ 0.264405] LCDB: qpnp_lcdb_regulator_probe: Failed to parse dt rc=-517
271[ 0.265223] msm-thermal soc:qcom,msm-thermal: probe_psm:Failed reading node=/soc/qcom,msm-thermal, key=qcom,pmic-sw-mode-temp. err=-22. KTM continues
272[ 0.265705] msm-thermal soc:qcom,msm-thermal: probe_ocr:Failed reading node=/soc/qcom,msm-thermal, key=qcom,pmic-opt-curr-temp err:-22. KTM continues
273[ 0.265743] msm-thermal soc:qcom,msm-thermal: probe_vdd_mx:Failed reading node=/soc/qcom,msm-thermal, key=qcom,mx-restriction-temp. KTM continues
274[ 0.265789] msm-thermal soc:qcom,msm-thermal: probe_freq_mitigation:Failed reading node=/soc/qcom,msm-thermal, key=qcom,limit-temp. err=-22. KTM continues
275[ 0.265824] msm-thermal soc:qcom,msm-thermal: msm_thermal:Failed reading node=/soc/qcom,msm-thermal, key=qcom,rpm-phase-resource-type err=-22. KTM continues
276[ 0.265858] msm-thermal soc:qcom,msm-thermal: msm_thermal:Failed reading node=/soc/qcom,msm-thermal, key=qcom,gfx-sensor-id. err=-22. KTM continues
277[ 0.267642] cpu cpu0: dev_pm_opp_get_opp_count: OPP table not found (-19)
278[ 0.267668] msm_thermal:get_cpu_freq_plan_len Error reading CPU0 freq table len. error:-19
279[ 0.267695] cpu cpu4: dev_pm_opp_get_opp_count: OPP table not found (-19)
280[ 0.267715] msm_thermal:get_cpu_freq_plan_len Error reading CPU4 freq table len. error:-19
281[ 0.267737] cpu cpu0: dev_pm_opp_get_opp_count: OPP table not found (-19)
282[ 0.267754] msm_thermal:get_cpu_freq_plan_len Error reading CPU0 freq table len. error:-19
283[ 0.267776] cpu cpu4: dev_pm_opp_get_opp_count: OPP table not found (-19)
284[ 0.267793] msm_thermal:get_cpu_freq_plan_len Error reading CPU4 freq table len. error:-19
285[ 0.269821] gpucc-sdm660 5065000.gfx: Registered GPUCC clocks
286[ 0.271703] clk-cpu-osm 179c0000.qcom,clk-cpu-660: using pwrcl speed bin 3 and pvs_ver 0
287[ 0.271753] clk-cpu-osm 179c0000.qcom,clk-cpu-660: using perfcl speed bin 3 and pvs_ver 0
288[ 0.273760] add_opp: Set OPP pair (300000000 Hz, 612000 uv) on cpu0
289[ 0.274032] add_opp: Set OPP pair (1612800000 Hz, 836000 uv) on cpu0
290[ 0.274063] add_opp: Set OPP pair (300000000 Hz, 612000 uv) on cpu1
291[ 0.274209] add_opp: Set OPP pair (1612800000 Hz, 836000 uv) on cpu1
292[ 0.274237] add_opp: Set OPP pair (300000000 Hz, 612000 uv) on cpu2
293[ 0.274374] add_opp: Set OPP pair (1612800000 Hz, 836000 uv) on cpu2
294[ 0.274415] add_opp: Set OPP pair (300000000 Hz, 612000 uv) on cpu3
295[ 0.274549] add_opp: Set OPP pair (1612800000 Hz, 836000 uv) on cpu3
296[ 0.274577] add_opp: Set OPP pair (300000000 Hz, 700000 uv) on cpu4
297[ 0.274676] add_opp: Set OPP pair (1804800000 Hz, 840000 uv) on cpu4
298[ 0.274705] add_opp: Set OPP pair (300000000 Hz, 700000 uv) on cpu5
299[ 0.274802] add_opp: Set OPP pair (1804800000 Hz, 840000 uv) on cpu5
300[ 0.274829] add_opp: Set OPP pair (300000000 Hz, 700000 uv) on cpu6
301[ 0.274925] add_opp: Set OPP pair (1804800000 Hz, 840000 uv) on cpu6
302[ 0.274952] add_opp: Set OPP pair (300000000 Hz, 700000 uv) on cpu7
303[ 0.275050] add_opp: Set OPP pair (1804800000 Hz, 840000 uv) on cpu7
304[ 0.275352] clk_cpu_osm_driver_probe: OSM driver inited
305[ 0.275398] LCDB: qpnp_lcdb_regulator_probe: Failed to parse dt rc=-517
306[ 0.282866] ACPI: Interpreter disabled.
307[ 0.283310] KPI: Bootloader start count = 95708
308[ 0.283314] KPI: Bootloader end count = 129146
309[ 0.283319] KPI: Bootloader display count = 1308530552
310[ 0.283323] KPI: Bootloader load kernel count = 5634
311[ 0.283327] KPI: Kernel MPM timestamp = 145943
312[ 0.283331] KPI: Kernel MPM Clock frequency = 32768
313[ 0.283342] socinfo_print: v0.11, id=345, ver=1.0, raw_id=204, raw_ver=0, hw_plat=8, hw_plat_ver=65536
314[ 0.283342] accessory_chip=0, hw_plat_subtype=0, pmic_model=65563, pmic_die_revision=131072 foundry_id=3 serial_number=1867797885 num_pmics=2
315[ 0.283353] msm_bus_fabric_init_driver
316[ 0.292277] msm_bus_dev_init_qos: Skipping QOS init for 1
317[ 0.292311] msm_bus_dev_init_qos: Skipping QOS init for 727msm_bus_dev_init_qos: Skipping QOS init for 728
318[ 0.293294] cam_avdd_gpio_regulator: supplied by pm660l_bob
319[ 0.293465] cam_rear_avdd_gpio_regulator: supplied by pm660l_bob
320[ 0.293628] cam_rear_dvdd_gpio_regulator: supplied by pm660_s5
321[ 0.293779] vgaarb: loaded
322[ 0.293888] qcom,qpnp-misc 800f000.qcom,spmi:qcom,pm660@0:qcom,misc@900: probe successful
323[ 0.294452] SCSI subsystem initialized
324[ 0.294732] usbcore: registered new interface driver usbfs
325[ 0.294751] usbcore: registered new interface driver hub
326[ 0.294880] usbcore: registered new device driver usb
327[ 0.295061] soc:usb_nop_phy supply vcc not found, using dummy regulator
328[ 0.295272] qcom,qpnp-power-on 800f000.qcom,spmi:qcom,pm660@0:qcom,power-on@800: PMIC@SID0 Power-on reason: Triggered from Hard Reset and 'cold' boot
329[ 0.295296] qcom,qpnp-power-on 800f000.qcom,spmi:qcom,pm660@0:qcom,power-on@800: PMIC@SID0: Power-off reason: Triggered from KPDPWR_N (Long Power Key hold)
330[ 0.295400] input: qpnp_pon as /devices/virtual/input/input0
331[ 0.296043] qcom,qpnp-power-on 800f000.qcom,spmi:qcom,pm660l@2:qcom,power-on@800: No PON config. specified
332[ 0.296084] qcom,qpnp-power-on 800f000.qcom,spmi:qcom,pm660l@2:qcom,power-on@800: PMIC@SID2 Power-on reason: Triggered from PON1 (secondary PMIC) and 'cold' boot
333[ 0.296107] qcom,qpnp-power-on 800f000.qcom,spmi:qcom,pm660l@2:qcom,power-on@800: PMIC@SID2: Power-off reason: Triggered from GP1 (Keypad_Reset1)
334[ 0.296303] media: Linux media interface: v0.10
335[ 0.296319] Linux video capture interface: v2.00
336[ 0.297039] cpufreq: driver msm up and running
337[ 0.297490] platform soc:qcom,ion:qcom,ion-heap@22: assigned reserved memory node adsp_region
338[ 0.297674] platform soc:qcom,ion:qcom,ion-heap@27: assigned reserved memory node qseecom_region
339[ 0.297821] platform soc:qcom,ion:qcom,ion-heap@10: assigned reserved memory node secure_region
340[ 0.298065] ION heap system created
341[ 0.298147] ION heap adsp created at 0x00000000ff400000 with size 800000
342[ 0.298155] ION heap qsecom created at 0x00000000f5800000 with size 1400000
343[ 0.298161] ION heap secure_display created at 0x00000000f6c00000 with size 5c00000
344[ 0.298168] ION heap secure_heap created
345[ 0.298484] PMIC@SID0: PM660 v2.0 options: 0, 0, 0, 0
346[ 0.298567] PMIC@SID2: PM660L v2.0.1 options: 0, 0, 0, 0
347[ 0.299014] IPA smmu_info.s1_bypass=1 smmu_info.fast_map=0
348[ 0.301398] gdsc_vfe0: supplied by gdsc_camss_top
349[ 0.301549] gdsc_vfe1: supplied by gdsc_camss_top
350[ 0.301697] gdsc_cpp: supplied by gdsc_camss_top
351[ 0.302206] gdsc_gpu_gx: supplied by gfx_corner
352[ 0.303272] mdss_pll_probe: MDSS pll label = MDSS DSI 0 PLL
353[ 0.303280] mdss_pll_probe: mdss_pll_probe: label=MDSS DSI 0 PLL PLL SSC enabled
354[ 0.303399] mdss_pll c994400.qcom,mdss_dsi_pll: Failed to create debugfs directory
355[ 0.303406] mdss_pll c994400.qcom,mdss_dsi_pll: Failed to create debugfs directory
356[ 0.303413] mdss_pll c994400.qcom,mdss_dsi_pll: Failed to create debugfs directory
357[ 0.303814] dsi_pll_clock_register_14nm: Registered DSI PLL ndx=0 clocks successfully
358[ 0.303832] mdss_pll_probe: MDSS pll label = MDSS DSI 1 PLL
359[ 0.303837] mdss_pll_probe: mdss_pll_probe: label=MDSS DSI 1 PLL PLL SSC enabled
360[ 0.303930] mdss_pll c996400.qcom,mdss_dsi_pll: Failed to create debugfs directory
361[ 0.303937] mdss_pll c996400.qcom,mdss_dsi_pll: Failed to create debugfs directory
362[ 0.303942] mdss_pll c996400.qcom,mdss_dsi_pll: Failed to create debugfs directory
363[ 0.304302] dsi_pll_clock_register_14nm: Registered DSI PLL ndx=1 clocks successfully
364[ 0.304319] mdss_pll_probe: MDSS pll label = MDSS DP PLL
365[ 0.316263] arm-smmu 16c0000.arm,smmu-anoc2: found 29 context interrupt(s) but have 21 context banks. assuming 21 context interrupts.
366[ 0.316999] arm-smmu 5100000.arm,smmu-lpass_q6: found 17 context interrupt(s) but have 13 context banks. assuming 13 context interrupts.
367[ 0.318074] arm-smmu cd00000.arm,smmu-mmss: found 24 context interrupt(s) but have 17 context banks. assuming 17 context interrupts.
368[ 0.318297] arm-smmu 5040000.arm,smmu-kgsl: regulator defer delay 80
369[ 0.318532] arm-smmu 5040000.arm,smmu-kgsl: found 8 context interrupt(s) but have 5 context banks. assuming 5 context interrupts.
370[ 0.320361] iommu: Adding device 18800000.qcom,icnss to group 0
371[ 0.320693] iommu: Adding device soc:iommu_test_device to group 1
372[ 0.320734] iommu: Adding device soc:usb_audio_qmi_dev to group 2
373[ 0.321042] iommu: Adding device soc:qcom,msm-audio-ion to group 3
374[ 0.321330] iommu: Adding device 14780000.qcom,ipa:ipa_smmu_ap to group 4
375[ 0.321342] iommu: Adding device 14780000.qcom,ipa:ipa_smmu_uc to group 5
376[ 0.321781] Advanced Linux Sound Architecture Driver Initialized.
377[ 0.322112] Bluetooth: ffffffc8f9673d58
378[ 0.322127] NET: Registered protocol family 31
379[ 0.322132] Bluetooth: ffffffc8f9673d58
380[ 0.322137] Bluetooth: ffffffc8f9673d38Bluetooth: ffffffc8f9673d18
381[ 0.322154] Bluetooth: ffffffc8f9673d38<6>[ 0.322370] cfg80211: World regulatory domain updated:
382[ 0.322374] cfg80211: DFS Master region: unset
383[ 0.322378] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
384[ 0.322386] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
385[ 0.322390] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
386[ 0.322395] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A, 2000 mBm), (N/A)
387[ 0.322399] cfg80211: (5170000 KHz - 5250000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A)
388[ 0.322402] cfg80211: (5250000 KHz - 5330000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A)
389[ 0.322407] cfg80211: (5490000 KHz - 5710000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A)
390[ 0.322411] cfg80211: (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A)
391[ 0.322415] cfg80211: (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm), (N/A)
392[ 0.322428] NetLabel: Initializing
393[ 0.322432] NetLabel: domain hash size = 128
394[ 0.322435] NetLabel: protocols = UNLABELED CIPSOv4
395[ 0.322462] NetLabel: unlabeled traffic allowed by default
396[ 0.322547] pcie:pcie_init.
397[ 0.324134] LCDB: qpnp_lcdb_regulator_probe: LCDB module successfully registered! lcdb_en=1 ldo_voltage=5400mV ncp_voltage=5400mV bst_voltage=5500mV
398[ 0.326539] ipa ipa2_uc_state_check:296 uC interface not initialized
399[ 0.326551] ipa ipa_sps_irq_control_all:963 EP (2) not allocated.
400[ 0.326555] ipa ipa_sps_irq_control_all:963 EP (5) not allocated.
401[ 0.328116] sps:BAM 0x0000000014784000 is registered.
402[ 0.328871] sps:BAM 0x0000000014784000 (va:0xffffff8008bc0000) enabled: ver:0x27, number of pipes:20
403[ 0.337211] IPA driver initialization was successful.
404[ 0.338238] clocksource: Switched to clocksource arch_sys_counter
405[ 0.361773] pnp: PnP ACPI: disabled
406[ 0.372033] gcc-debug-sdm660 62000.qcom,cc-debug: Registered debug mux successfully
407[ 0.372789] NET: Registered protocol family 2
408[ 0.373260] TCP established hash table entries: 32768 (order: 6, 262144 bytes)
409[ 0.373417] TCP bind hash table entries: 32768 (order: 7, 524288 bytes)
410[ 0.373853] TCP: Hash tables configured (established 32768 bind 32768)
411[ 0.373986] UDP hash table entries: 2048 (order: 4, 65536 bytes)
412[ 0.374032] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
413[ 0.374230] NET: Registered protocol family 1
414[ 0.374273] PCI: CLS 0 bytes, default 64
415[ 0.374576] Trying to unpack rootfs image as initramfs...
416[ 0.391761] Freeing initrd memory: 984K (ffffffc803400000 - ffffffc8034f6000)
417[ 0.397039] Initialise system trusted keyring
418[ 0.397181] vmscan: error setting kswapd cpu affinity mask
419[ 0.399567] VFS: Disk quotas dquot_6.6.0
420[ 0.399632] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
421[ 0.400210] [SDFAT] Filesystem version 2.0.6
422[ 0.400568] Registering sdcardfs 0.1
423[ 0.400689] fuse init (API version 7.23)
424[ 0.400891] SELinux: Registering netfilter hooks
425[ 0.401184] pfk_ecryptfs [pfk_ecryptfs_init]: PFK ecryptfs inited successfully
426[ 0.401192] pfk_ext4 [pfk_ext4_init]: PFK EXT4 inited successfully
427[ 0.401199] pfk [pfk_init]: Driver initialized successfully
428[ 0.405166] Key type asymmetric registered
429[ 0.405177] Asymmetric key parser 'x509' registered
430[ 0.405251] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 245)
431[ 0.405263] io scheduler noop registered
432[ 0.405270] io scheduler deadline registered
433[ 0.405342] io scheduler cfq registered (default)
434[ 0.410260] msm_dss_get_res_byname: 'vbif_nrt_phys' resource not found
435[ 0.410288] mdss_mdp_probe+0x2c4/0x34e8->msm_dss_ioremap_byname: 'vbif_nrt_phys' msm_dss_get_res_byname failed
436[ 0.410719] mdss_mdp_irq_clk_setup: unable to get core gdsc regulator
437[ 0.411722] No change in context(0==0), skip
438[ 0.412526] mdss_mdp_pipe_addr_setup: type:0 ftchid:-1 xinid:0 num:0 rect:0 ndx:0x1 prio:0
439[ 0.412534] mdss_mdp_pipe_addr_setup: type:0 ftchid:-1 xinid:4 num:1 rect:0 ndx:0x2 prio:1
440[ 0.412565] mdss_mdp_pipe_addr_setup: type:2 ftchid:-1 xinid:1 num:6 rect:0 ndx:0x40 prio:2
441[ 0.412572] mdss_mdp_pipe_addr_setup: type:2 ftchid:-1 xinid:1 num:6 rect:1 ndx:0x40 prio:2
442[ 0.412578] mdss_mdp_pipe_addr_setup: type:2 ftchid:-1 xinid:5 num:7 rect:0 ndx:0x80 prio:3
443[ 0.412587] mdss_mdp_pipe_addr_setup: type:2 ftchid:-1 xinid:5 num:7 rect:1 ndx:0x80 prio:3
444[ 0.412592] mdss_mdp_pipe_addr_setup: type:2 ftchid:-1 xinid:9 num:12 rect:0 ndx:0x1000 prio:4
445[ 0.412602] mdss_mdp_pipe_addr_setup: type:2 ftchid:-1 xinid:9 num:12 rect:1 ndx:0x1000 prio:4
446[ 0.412613] mdss_mdp_pipe_addr_setup: type:3 ftchid:-1 xinid:2 num:10 rect:0 ndx:0x400 prio:0
447[ 0.412623] mdss_mdp_parse_dt_handler: Error from prop qcom,mdss-pipe-sw-reset-off : u32 array read
448[ 0.412696] mdss_mdp_parse_dt_handler: Error from prop qcom,mdss-ib-factor-overlap : u32 array read
449[ 0.412705] mdss_mdp_parse_dt_handler: Error from prop qcom,mdss-bus-througput-factor : u32 array read
450[ 0.413062] xlog_status: enable:0, panic:1, dump:2
451[ 0.413416] iommu: Adding device c900000.qcom,mdss_mdp:qcom,smmu_mdp_unsec_cb to group 6
452[ 0.413642] iommu: Adding device c900000.qcom,mdss_mdp:qcom,smmu_mdp_sec_cb to group 7
453[ 0.413766] mdss_mdp_probe: mdss version = 0x30020000, bootloader display is on, num 1, intf_sel=0x00000100
454[ 0.415262] mdss_smmu_probe: iommu v2 domain[0] mapping and clk register successful!
455[ 0.415499] mdss_smmu_probe: iommu v2 domain[2] mapping and clk register successful!
456[ 0.418314] mdss_dsi_ctrl_probe: DSI Ctrl name = MDSS DSI CTRL->0
457[ 0.418758] mdss_dsi_find_panel_of_node: cmdline:0:qcom,mdss_dsi_td4310_tianma_fhd_video:config0:1:none:cfg:single_dsi panel_name:qcom,mdss_dsi_td4310_tianma_fhd_video
458[ 0.418843] mdss_dsi_panel_init: Panel Name = tianma td4310 fhd video mode dsi panel
459[ 0.418936] mdss_dsi_parse_split_link_settings: enable 0 sublinks-count 0 lanes per sublink 0
460[ 0.418965] mdss_dsi_panel_timing_from_dt: found new timing "qcom,mdss_dsi_td4310_tianma_fhd_video" (ffffffc8f9673518)
461[ 0.418985] mdss_dsi_parse_dcs_cmds: failed, key=qcom,mdss-dsi-post-panel-on-command
462[ 0.418994] mdss_dsi_parse_dcs_cmds: failed, key=qcom,mdss-dsi-timing-switch-command
463[ 0.418999] mdss_dsi_panel_get_dsc_cfg_np: cannot find dsc config node:config0
464[ 0.419252] mdss_dsi_parse_panel_features: ulps feature disabled
465[ 0.419260] mdss_dsi_parse_panel_features: ulps during suspend feature disabled
466[ 0.419269] mdss_dsi_parse_dms_config: dynamic switch feature enabled: 0
467[ 0.419323] mdss_dsi_parse_dcs_cmds: failed, key=qcom,mdss-dsi-lp-mode-on
468[ 0.419331] mdss_dsi_parse_dcs_cmds: failed, key=qcom,mdss-dsi-lp-mode-off
469[ 0.419350] dyn_fps: min = 48, max = 60
470[ 0.419608] mdss_dsi_parse_ctrl_params:4495 Unable to read qcom,display-id, data=0000000000000000,len=20
471[ 0.419644] mdss_dsi_parse_gpio_params: bklt_en gpio not specified
472[ 0.419651] mdss_dsi_parse_gpio_params: avdd_en gpio not specified
473[ 0.419733] msm_dss_get_res_byname: 'dsi_phy_regulator' resource not found
474[ 0.419752] mdss_dsi_retrieve_ctrl_resources+0x194/0x264->msm_dss_ioremap_byname: 'dsi_phy_regulator' msm_dss_get_res_byname failed
475[ 0.419759] mdss_dsi_retrieve_ctrl_resources: ctrl_base=ffffff8008a72000 ctrl_size=400 phy_base=ffffff8008a78400 phy_size=588
476[ 0.419878] dsi_panel_device_register: Continuous splash enabled
477[ 0.419979] Unable to find fb node for device: c994000.qcom,mdss_dsi_ctrl0
478[ 0.420211] mdss_register_panel: adding framebuffer device c994000.qcom,mdss_dsi_ctrl0
479[ 0.422681] mdss_dsi_panel_reset, panel reset
480[ 0.423214] mdss_dsi_ctrl_probe: Dsi Ctrl->0 initialized, DSI rev:0x20010000, PHY rev:0x2
481[ 0.423274] mdss_dsi_status_init: DSI status check interval:1000
482[ 0.424251] mdss_dp_usbpd_setup: get_usbpd phandle failed (-11)
483[ 0.424259] mdss_dp_probe: Error usbpd setup!
484[ 0.425394] mdss_register_panel: adding framebuffer device soc:qcom,mdss_wb_panel
485[ 0.426010] mdss_fb_probe: fb0: split_mode:0 left:0 right:0
486[ 0.426451] mdss_fb_register: FrameBuffer[0] 1080x2160 registered successfully!
487[ 0.427047] mdss_fb_probe: fb1: split_mode:0 left:0 right:0
488[ 0.427157] mdss_fb_register: FrameBuffer[1] 640x480 registered successfully!
489[ 0.427312] mdss_mdp_splash_parse_dt: splash mem child node is not present
490[ 0.432026] spcom [spcom_init]: spcom driver version 1.1 17-July-2017.
491[ 0.432391] audio_notifer_reg_service: service SSR_MODEM is in use
492[ 0.434921] In memshare_probe, Memshare probe success
493[ 0.439242] memshare_child soc:qcom,memshare:qcom,client_1: for memshare_GPS segments only will be dumped.
494[ 0.439407] memshare_child soc:qcom,memshare:qcom,client_2: for memshare_FTM segments only will be dumped.
495[ 0.454518] memshare_child soc:qcom,memshare:qcom,client_3: for memshare_DIAG segments only will be dumped.
496[ 0.455869] subsys-pil-tz cce0000.qcom,venus: for venus segments only will be dumped.
497[ 0.456474] subsys-pil-tz soc:qcom,kgsl-hyp: for a512_zap segments only will be dumped.
498[ 0.458146] pil-q6v5-mss 4080000.qcom,mss: No pas_id found.
499[ 0.461765] icnss 18800000.qcom,icnss: for wcss_msa0 segments only will be dumped.
500[ 0.461968] icnss: Platform driver probed successfully
501[ 0.464832] msm_rpm_log_probe: OK
502[ 0.466360] uart_tx_gpio is not available
503[ 0.466370] uart_rx_gpio is not available
504[ 0.466374] uart_cts_gpio is not available
505[ 0.466378] uart_rfr_gpio is not available
506[ 0.466962] sps: BAM device 0x000000000c184000 is not registered yet.
507[ 0.467105] sps:BAM 0x000000000c184000 is registered.
508[ 0.468338] c1af000.uart: ttyHS0 at MMIO 0xc1af000 (irq = 293, base_baud = 460800) is a MSM HS UART
509[ 0.469246] msm_serial_hs module loaded
510[ 0.470997] random: nonblocking pool is initialized
511[ 0.483449] iommu: Adding device 5040000.qcom,kgsl-iommu:gfx3d_user to group 8
512[ 0.483764] iommu: Adding device 5040000.qcom,kgsl-iommu:gfx3d_secure to group 9
513[ 0.491967] brd: module loaded
514[ 0.495081] loop: module loaded
515[ 0.495422] zram: Added device: zram0
516[ 0.496176] QSEECOM: qseecom_probe: qseecom.qsee_version = 0x1000000
517[ 0.496204] QSEECOM: qseecom_retrieve_ce_data: Device does not support PFE
518[ 0.496213] QSEECOM: qseecom_probe: no-clock-support=0x1<4>[ 0.496221] QSEECOM: qseecom_probe: qseecom.qsee_reentrancy_support = 2
519[ 0.496400] QSEECOM: qseecom_probe: qseecom.whitelist_support = 1
520[ 0.499259] Macle ant_probe
521[ 0.499547] Macle irq_gpio=74
522[ 0.499623] input: ant_check-input as /devices/virtual/input/input1
523[ 0.499654] ant_probe: gpios = 0, gpion=0
524[ 0.499660] Macle irq = 249
525[ 0.499824] ant_probe end
526[ 0.502485] msm-cdc-pinctrl soc:sdw_clk_data_pinctrl: msm_cdc_pinctrl_probe: Cannot get cdc gpio pinctrl:-22
527[ 0.502503] msm-cdc-pinctrl: probe of soc:sdw_clk_data_pinctrl failed with error -22
528[ 0.502520] msm-cdc-pinctrl soc:wsa_spkr_en1_pinctrl: msm_cdc_pinctrl_probe: Cannot get cdc gpio pinctrl:-22
529[ 0.502527] msm-cdc-pinctrl: probe of soc:wsa_spkr_en1_pinctrl failed with error -22
530[ 0.502543] msm-cdc-pinctrl soc:wsa_spkr_en2_pinctrl: msm_cdc_pinctrl_probe: Cannot get cdc gpio pinctrl:-22
531[ 0.502550] msm-cdc-pinctrl: probe of soc:wsa_spkr_en2_pinctrl failed with error -22
532[ 0.503774] qce 1de0000.qcedev: Qualcomm Crypto 5.3.4 device found @0x1de0000
533[ 0.503786] qce 1de0000.qcedev: CE device = 0x0
534[ 0.503786] IO base, CE = 0xffffff8009c40000
535[ 0.503786] Consumer (IN) PIPE 2, Producer (OUT) PIPE 3
536[ 0.503786] IO base BAM = 0x0000000000000000
537[ 0.503786] BAM IRQ 85
538[ 0.503786] Engines Availability = 0x2011053
539[ 0.503980] sps:BAM 0x0000000001dc4000 is registered.
540[ 0.504195] sps:BAM 0x0000000001dc4000 (va:0xffffff8009fc0000) enabled: ver:0x27, number of pipes:16
541[ 0.504416] QCE50: qce_sps_init: Qualcomm MSM CE-BAM at 0x0000000001dc4000 irq 85
542[ 0.517807] qcrypto 1de0000.qcrypto: Qualcomm Crypto 5.3.4 device found @0x1de0000
543[ 0.517824] qcrypto 1de0000.qcrypto: CE device = 0x0
544[ 0.517824] IO base, CE = 0xffffff800b040000
545[ 0.517824] Consumer (IN) PIPE 4, Producer (OUT) PIPE 5
546[ 0.517824] IO base BAM = 0x0000000000000000
547[ 0.517824] BAM IRQ 85
548[ 0.517824] Engines Availability = 0x2011053
549[ 0.518197] QCE50: qce_sps_init: Qualcomm MSM CE-BAM at 0x0000000001dc4000 irq 85
550[ 0.529850] qcrypto 1de0000.qcrypto: qcrypto-ecb-aes
551[ 0.529984] qcrypto 1de0000.qcrypto: qcrypto-cbc-aes
552[ 0.530199] qcrypto 1de0000.qcrypto: qcrypto-ctr-aes
553[ 0.530316] qcrypto 1de0000.qcrypto: qcrypto-ecb-des
554[ 0.530423] qcrypto 1de0000.qcrypto: qcrypto-cbc-des
555[ 0.530532] qcrypto 1de0000.qcrypto: qcrypto-ecb-3des
556[ 0.530642] qcrypto 1de0000.qcrypto: qcrypto-cbc-3des
557[ 0.530751] qcrypto 1de0000.qcrypto: qcrypto-xts-aes
558[ 0.530860] qcrypto 1de0000.qcrypto: qcrypto-sha1
559[ 0.530971] qcrypto 1de0000.qcrypto: qcrypto-sha256
560[ 0.531084] qcrypto 1de0000.qcrypto: qcrypto-aead-hmac-sha1-cbc-aes
561[ 0.531196] qcrypto 1de0000.qcrypto: qcrypto-aead-hmac-sha1-cbc-des
562[ 0.531304] qcrypto 1de0000.qcrypto: qcrypto-aead-hmac-sha1-cbc-3des
563[ 0.531413] qcrypto 1de0000.qcrypto: qcrypto-aead-hmac-sha256-cbc-aes
564[ 0.531522] qcrypto 1de0000.qcrypto: qcrypto-aead-hmac-sha256-cbc-des
565[ 0.531635] qcrypto 1de0000.qcrypto: qcrypto-aead-hmac-sha256-cbc-3des
566[ 0.531743] qcrypto 1de0000.qcrypto: qcrypto-hmac-sha1
567[ 0.531851] qcrypto 1de0000.qcrypto: qcrypto-hmac-sha256
568[ 0.531962] qcrypto 1de0000.qcrypto: qcrypto-aes-ccm
569[ 0.532074] qcrypto 1de0000.qcrypto: qcrypto-rfc4309-aes-ccm
570[ 0.533626] qcom_ice_get_device_tree_data: No vdd-hba-supply regulator, assuming not needed
571[ 0.534265] SCSI Media Changer driver v0.25
572[ 0.536425] sps:BAM 0x000000000c184000 (va:0xffffff8008e20000) enabled: ver:0x19, number of pipes:12
573[ 0.537019] Ethernet Channel Bonding Driver: v3.7.1 (April 27, 2011)
574[ 0.537782] tun: Universal TUN/TAP device driver, 1.6
575[ 0.537795] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
576[ 0.537929] sky2: driver version 1.30
577[ 0.538596] PPP generic driver version 2.4.2
578[ 0.538700] PPP BSD Compression module registered
579[ 0.538708] PPP Deflate Compression module registered
580[ 0.538730] PPP MPPE Compression module registered
581[ 0.538740] NET: Registered protocol family 24
582[ 0.538832] CLD80211: Initializing
583[ 0.538912] usbcore: registered new interface driver asix
584[ 0.538969] usbcore: registered new interface driver ax88179_178a
585[ 0.538993] usbcore: registered new interface driver cdc_ether
586[ 0.539013] usbcore: registered new interface driver net1080
587[ 0.539033] usbcore: registered new interface driver cdc_subset
588[ 0.539050] usbcore: registered new interface driver zaurus
589[ 0.539095] usbcore: registered new interface driver cdc_ncm
590[ 0.539576] msm_sharedmem: sharedmem_register_qmi: qmi init successful
591[ 0.541745] msm_sharedmem: msm_sharedmem_probe: Device created for client 'rmtfs'
592[ 0.547032] msm-dwc3 a800000.ssusb: unable to get dbm device
593[ 0.548362] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
594[ 0.548385] ehci-pci: EHCI PCI platform driver
595[ 0.548409] ehci-platform: EHCI generic platform driver
596[ 0.548767] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
597[ 0.548780] ohci-pci: OHCI PCI platform driver
598[ 0.548807] ohci-platform: OHCI generic platform driver
599[ 0.549488] usbcore: registered new interface driver usb-storage
600[ 0.549515] usbcore: registered new interface driver usb_ehset_test
601[ 0.550149] usb_qdss_init: failed to register diag -17
602[ 0.550164] usb_qcrndis_init: failed to register diag -17
603[ 0.550938] mousedev: PS/2 mouse device common for all mice
604[ 0.552511] i2c-msm-v2 c175000.i2c: msm_bus_scale_register_client(mstr-id:86):0xc (ok)
605[ 0.566806] input: synaptics_dsx as /devices/soc/c175000.i2c/i2c-1/1-0020/input/input2
606[ 0.567831] [NVT-ts] nvt_driver_init 1748: start
607[ 0.567873] [NVT-ts] nvt_ts_probe 1231: start
608[ 0.567962] [NVT-ts] nvt_parse_dt 880: novatek,irq-gpio=67
609[ 0.567997] [NVT-ts] nvt_parse_dt 882: novatek,reset-gpio=66
610[ 0.568004] [NVT-ts] nvt_gpio_config 906: Failed to request NVT-int GPIO
611[ 0.568009] [NVT-ts] nvt_ts_probe 1248: gpio config error!
612[ 0.568021] NVT-ts: probe of 1-0062 failed with error -16
613[ 0.568038] nvt_driver_init: finished
614[ 0.568052] ctp_selftest_init
615[ 0.568146] create_proc_entry g_ctp_selftest_proc success
616[ 0.568155] ctp_upgrade_init
617[ 0.568240] [elan] create_proc_entry 222 success
618[ 0.568245] create_proc_entry success
619[ 0.568252] ctp_if_upgrade_init
620[ 0.568340] ctp_if_upgrade_init create_proc_entry 222 success
621[ 0.568345] create_proc_entry success
622[ 0.568349] create_proc_entry success
623[ 0.569183] input: hbtp_vm as /devices/virtual/input/input3
624[ 0.569417] stmvl53l0_init: Enter
625[ 0.569423] stmvl53l0_init_cci: Enter
626[ 0.569844] stmvl53l0_init_cci: End
627[ 0.569849] stmvl53l0_init: End
628[ 0.570610] tyt fpc1020_probe:613
629[ 0.570647] tyt fpc1020_request_named_gpio:534
630[ 0.570685] tyt fpc1020_request_named_gpio:534
631[ 0.570812] fpc1020 soc:fpc1020: found pin control fpc1020_reset_reset
632[ 0.570818] fpc1020 soc:fpc1020: found pin control fpc1020_reset_active
633[ 0.570824] fpc1020 soc:fpc1020: found pin control fpc1020_irq_active
634[ 0.570829] tyt select_pin_ctl:230
635[ 0.570847] tyt select_pin_ctl:230
636[ 0.570852] tyt select_pin_ctl:230
637[ 0.570855] tyt select_pin_ctl:230
638[ 0.571021] tyt select_pin_ctl:230
639[ 0.571026] tyt select_pin_ctl:230
640[ 0.571040] tyt hw_reset:297
641[ 0.571264] tyt select_pin_ctl:230
642[ 0.571282] tyt fpc1020_irq_handler:506
643[ 0.576395] tyt select_pin_ctl:230
644[ 0.576400] tyt select_pin_ctl:230
645[ 0.576683] tyt fpc1020_irq_handler:506
646[ 0.581542] fpc1020 soc:fpc1020: IRQ after reset 1
647[ 0.581552] gf3208 Create proc entry success!
648[ 0.581559] fpc1020 soc:fpc1020: fpc1020_probe: ok
649[ 0.581603] tyt fpc1020_init:773
650[ 0.581609] fpc1020_init OK
651[ 0.581992] Macle11 gf_probe
652[ 0.582180] input: uinput-goodix as /devices/virtual/input/input4
653[ 0.582267] gf3208: version V1.2.10
654[ 0.582323] gf3208: status = 0x0
655[ 0.582958] Macle hall_probe
656[ 0.582993] Macle irq_gpio=75
657[ 0.583067] input: hall-switch-input as /devices/virtual/input/input5
658[ 0.583500] hall_probe: gpios = 0, gpion=0
659[ 0.583506] Macle irq = 250
660[ 0.583657] hall_probe end
661[ 0.584132] qcom,qpnp-rtc 800f000.qcom,spmi:qcom,pm660@0:qcom,pm660_rtc: rtc core: registered qpnp_rtc as rtc0
662[ 0.584596] i2c /dev entries driver
663[ 0.585455] iommu: Adding device soc:qcom,cam_smmu:msm_cam_smmu_cb1 to group 10
664[ 0.585708] CAM-SMMU cam_smmu_populate_sids:2331 __debug cnt = 8, cb->name: :vfe sid [0] = 3072
665[ 0.585708] ,
666[ 0.585715] CAM-SMMU cam_smmu_populate_sids:2331 __debug cnt = 8, cb->name: :vfe sid [1] = 3073
667[ 0.585715] ,CAM-SMMU cam_smmu_populate_sids:2331 __debug cnt = 8, cb->name: :vfe sid [2] = 3074
668[ 0.585723] ,
669[ 0.585728] CAM-SMMU cam_smmu_populate_sids:2331 __debug cnt = 8, cb->name: :vfe sid [3] = 3075
670[ 0.585728] ,<6>[ 0.585876] iommu: Adding device soc:qcom,cam_smmu:msm_cam_smmu_cb2 to group 11
671[ 0.585991] CAM-SMMU cam_smmu_populate_sids:2331 __debug cnt = 2, cb->name: :cpp sid [0] = 2560
672[ 0.585991] ,
673[ 0.586089] iommu: Adding device soc:qcom,cam_smmu:msm_cam_smmu_cb4 to group 12
674[ 0.586173] CAM-SMMU cam_smmu_populate_sids:2331 __debug cnt = 2, cb->name: :jpeg_enc0 sid [0] = 2048
675[ 0.586173] ,
676[ 0.586259] iommu: Adding device soc:qcom,cam_smmu:msm_cam_smmu_cb5 to group 13
677[ 0.586337] CAM-SMMU cam_smmu_populate_sids:2331 __debug cnt = 2, cb->name: :jpeg_dma sid [0] = 2049
678[ 0.586337] ,
679[ 0.602269] msm_actuator_platform_probe:1974 msm_actuator_platform_probe: No/Error Actuator GPIOs
680[ 0.602541] msm_actuator_platform_probe:1974 msm_actuator_platform_probe: No/Error Actuator GPIOs
681[ 0.602783] msm_actuator_platform_probe:1974 msm_actuator_platform_probe: No/Error Actuator GPIOs
682[ 0.645911] msm_cci_init:1439: hw_version = 0x10060000
683[ 1.065081] before get_tddi_lockdown_data
684[ 1.180683] i=2 flag offset 412
685[ 1.180690] Invalid flag = 0x0
686[ 1.180695] i=1 flag offset 386
687[ 1.180699] Invalid flag = 0x0
688[ 1.180704] i=0 flag offset 360
689[ 1.180710] whyred_s5k5e8_ofilm_i_get_otp_vendor_module_id flag = 0x55, mid = 0x7, lensid = 0x1f, sensorid = 0x9
690[ 1.180717] get_otp_vendor_module_id 1680 eeprom_name=whyred_s5k5e8_ofilm_i, module_id=0x7
691[ 1.217222] msm_eeprom_platform_probe failed 1779
692[ 1.218035] msm_eeprom_platform_probe failed 1779
693[ 1.218827] msm_eeprom_platform_probe failed 1779
694[ 1.219580] msm_eeprom_platform_probe failed 1779
695[ 1.261953] msm_cci_init:1439: hw_version = 0x10060000
696[ 1.800670] i=2 flag offset 412
697[ 1.800677] Invalid flag = 0x0
698[ 1.800681] i=1 flag offset 386
699[ 1.800686] Invalid flag = 0x0
700[ 1.800690] i=0 flag offset 360
701[ 1.800696] whyred_s5k5e8_qtech_ii_get_otp_vendor_module_id flag = 0x55, mid = 0x7, lensid = 0x1f, sensorid = 0x9
702[ 1.800703] get_otp_vendor_module_id 1680 eeprom_name=whyred_s5k5e8_qtech_ii, module_id=0x0
703[ 1.843195] qcom,camera-flash soc:qcom,camera-flash@1: Led torch-light0 renamed to torch-light0_1 due to name collision
704[ 1.852422] MSM-CPP cpp_init_hardware:1134 CPP HW Version: 0x60010002
705[ 1.852442] MSM-CPP cpp_init_hardware:1152 stream_cnt:0
706[ 1.852701] MSM-CPP cpp_release_hardware:1215 cpp hw release done
707[ 1.853669] CAM-SOC msm_camera_get_reg_base:864 err: mem resource vfe_fuse not found
708[ 1.853678] CAM-SOC msm_camera_get_res_size:907 err: mem resource vfe_fuse not found
709[ 1.855322] CAM-SOC msm_camera_get_reg_base:864 err: mem resource vfe_fuse not found
710[ 1.855330] CAM-SOC msm_camera_get_res_size:907 err: mem resource vfe_fuse not found
711[ 1.862815] __msm_jpeg_init:1537] Jpeg Device id 0
712[ 1.869998] iommu: Adding device cc00000.qcom,vidc:non_secure_cb to group 14
713[ 1.872487] iommu: Adding device cc00000.qcom,vidc:firmware_cb to group 15
714[ 1.872650] iommu: Adding device cc00000.qcom,vidc:secure_bitstream_cb to group 16
715[ 1.874377] iommu: Adding device cc00000.qcom,vidc:secure_pixel_cb to group 17
716[ 1.875421] iommu: Adding device cc00000.qcom,vidc:secure_non_pixel_cb to group 18
717[ 1.878407] sde_smmu_callback: <SDEROT_INFO> sde_smmu_callback registered domain: 1
718[ 1.878417] sde_smmu_callback: <SDEROT_INFO> sde_smmu_callback registered domain: 0
719[ 1.878971] No change in context(0==0), skip
720[ 1.879892] sde_rotator_evtlog_create_debugfs: evtlog_status: enable:1, panic:1, dump:2
721[ 1.879929] sde_rotator c900000.qcom,mdss_rotator: <SDEROT_INFO> SDE v4l2 rotator probe success
722[ 1.880686] usbcore: registered new interface driver uvcvideo
723[ 1.880695] USB Video Class driver (1.1.1)
724[ 1.881670] lct smb1351_parallel_charger_probe: smb1351 parallel successfully probed.
725[ 1.881856] lct QCOM-BATT: pl_disable_vote_callback: parallel charging disabled
726[ 1.882313] PMI: smblib_get_charge_param: usb input current limit = 1500000 (0x3c)
727[ 1.882360] PMI: smblib_set_charge_param: usb otg current limit = 250000 (0x00)
728[ 1.882496] PMI: smblib_request_dpdm: enabling DPDM regulator
729[ 1.883134] PMI: smblib_rerun_apsd: re-running APSD
730[ 1.883192] PMI: smblib_set_charge_param: dc input current limit = 2000000 (0x50)
731[ 1.890153] lct smb1351_is_usb_present: USB psy not found
732[ 2.431197] PMI: smblib_set_charge_param: dc icl PT <8V = 625000 (0x19)
733[ 2.431217] PMI: smblib_set_charge_param: dc icl PT >8V = 555555 (0x16)
734[ 2.431233] PMI: smblib_set_charge_param: dc icl div2 <5.5V = 909090 (0x24)
735[ 2.431249] PMI: smblib_set_charge_param: dc icl div2 5.5-6.5V = 769230 (0x1e)
736[ 2.431263] PMI: smblib_set_charge_param: dc icl div2 6.5-8.0V = 625000 (0x19)
737[ 2.431278] PMI: smblib_set_charge_param: dc icl div2 >8.0V = 454545 (0x12)
738[ 2.432168] thermal thermal_zone0: failed to read out thermal zone (-19)
739[ 2.432184] enter sysfs create file
740[ 2.432192] enter sysfs create file thermal
741[ 2.432231] PMI: smblib_set_charge_param: buck switching frequency = 650 (0x0e)
742[ 2.432244] lct smb1351_parallel_set_property: smb1351_parallel_set_property POWER_SUPPLY_PROP_INPUT_SUSPEND = 1
743[ 2.432251] lct smb1351_parallel_set_chg_suspend: Skip same state request suspended = 1 suspend=0
744[ 2.432257] lct smb1351_parallel_set_chg_suspend: smb1351 chip->parallel_charger_suspended = 1,request suspend=1
745[ 2.432487] i2c-msm-v2 c176000.i2c: msm_bus_scale_register_client(mstr-id:86):0x15 (ok)
746[ 2.433183] lct smb1351_usb_suspend: reason = 4 requested_suspend = 1 suspended_status = 0
747[ 2.433189] lct smb1351_usb_suspend: new suspended_status = 4
748[ 2.433508] lct smb1351_parallel_set_chg_suspend: lct suspend smb1351 success
749[ 2.433555] PMI: smblib_get_prop_usb_online: POWER_PATH_STATUS = 0x95
750[ 2.433592] PMI: smblib_get_prop_usb_online: POWER_PATH_STATUS = 0x95
751[ 2.433698] PMI: smblib_get_charge_param: input current limit status = 500000 (0x14)
752[ 2.433726] PMI: smblib_get_charge_param: input current limit status = 500000 (0x14)
753[ 2.433794] PMI: smblib_get_apsd_result: APSD_STATUS = 0x00
754[ 2.433819] PMI: smblib_get_charge_param: input current limit status = 500000 (0x14)
755[ 2.433850] PMI: smblib_usb_plugin_locked: lct IRQ: usbin-plugin attached
756[ 2.433863] PMI: smblib_handle_usb_typec_change: Scheduling OTG work
757[ 2.433881] PMI: smblib_handle_usb_source_change: APSD_STATUS = 0x00
758[ 2.433887] PMI: smblib_handle_usb_source_change: chg->real_charger_type = 0x00
759[ 2.433902] PMI: smblib_get_apsd_result: APSD_STATUS = 0x00
760[ 2.433909] PMI: smblib_handle_hvdcp_check_timeout: IRQ: smblib_handle_hvdcp_check_timeout falling
761[ 2.433915] PMI: smblib_handle_sdp_enumeration_done: IRQ: sdp-enumeration-done falling
762[ 2.433921] PMI: smblib_handle_slow_plugin_timeout: IRQ: slow-plugin-timeout falling
763[ 2.433981] PMI: smblib_check_ov_condition: Couldn't get current voltage, rc=-61
764[ 2.434023] PMI: smblib_get_charge_param: float voltage = 4395000 (0x79)
765[ 2.434040] PMI: smblib_get_charge_param: fast charge current = 2000000 (0x50)
766[ 2.434058] PMI: smblib_get_charge_param: input current limit status = 500000 (0x14)
767[ 2.434109] PMI: smblib_get_charge_param: input current limit status = 500000 (0x14)
768[ 2.434126] PMI: smblib_get_apsd_result: APSD_STATUS = 0x00
769[ 2.434160] PMI: smblib_set_charge_param: usb input current limit = 475000 (0x13)
770[ 2.434255] lct QCOM-BATT: pl_fcc_vote_callback: pl_disable_votable effective total_fcc_ua =2500000
771[ 2.434260] lct QCOM-BATT: pl_fcc_vote_callback: pl_disable_votable effective total_fcc_ua =2500000 froce to 2000000
772[ 2.434276] smblib_adjust_jeita_cc_config fcc val_u = 2000000
773[ 2.434290] PMI: smblib_get_charge_param: jeita fcc reduction = 1200000 (0x30)
774[ 2.434295] lct smblib_adjust_jeita_cc_config jeita cc current_cc_minus_ua = 1200000
775[ 2.434310] PMI: smblib_set_charge_param: jeita fcc reduction = 700000 (0x1c)
776[ 2.434317] smblib_adjust_jeita_cc_config jeita cc need to decrease to 700000, write result = 0
777[ 2.434323] PMI: smblib_set_charge_param: fast charge current = 2000000 (0x50)
778[ 2.434338] PMI: smblib_set_charge_param: float voltage = 4400000 (0x79)
779[ 2.434362] lct QCOM-BATT: handle_main_charge_type: chip->charge_type =0, pval.intval=3
780[ 2.434369] lct QCOM-BATT: handle_main_charge_type: chg_state enabling parallel
781[ 2.434385] PMI: smblib_get_charge_param: input current limit status = 500000 (0x14)
782[ 2.434404] lct QCOM-BATT: handle_settled_icl_change: main_limited=1, main_settled_ua=500000, chip->pl_settled_ua=0 ,total_current_ua=-22
783[ 2.434410] lct QCOM-BATT: handle_settled_icl_change: total_current_ua <= 1300000 disable parallel charger smb1351
784[ 2.434458] PMI: smblib_get_prop_usb_online: POWER_PATH_STATUS = 0x95
785[ 2.434491] PMI: smblib_get_prop_usb_online: POWER_PATH_STATUS = 0x95
786[ 2.434564] PMI: smblib_get_charge_param: input current limit status = 500000 (0x14)
787[ 2.434589] PMI: smblib_get_charge_param: input current limit status = 500000 (0x14)
788[ 2.434652] PMI: smblib_get_apsd_result: APSD_STATUS = 0x00
789[ 2.434676] PMI: smblib_get_charge_param: input current limit status = 500000 (0x14)
790[ 2.434701] PMI: smblib_handle_usb_source_change: APSD_STATUS = 0x00
791[ 2.434709] PMI: smblib_handle_chg_state_change: IRQ: determine-initial-status
792[ 2.434758] PMI: smblib_get_prop_usb_online: POWER_PATH_STATUS = 0x95
793[ 2.434775] PMI: smblib_get_prop_dc_online: POWER_PATH_STATUS = 0x95
794[ 2.434830] PMI: smblib_get_prop_usb_online: POWER_PATH_STATUS = 0x95
795[ 2.434846] PMI: smblib_get_prop_dc_online: POWER_PATH_STATUS = 0x95
796[ 2.434890] PMI: smblib_get_prop_batt_health: BATTERY_CHARGER_STATUS_2 = 0x80
797[ 2.435046] PMI: smblib_get_charge_param: input current limit status = 500000 (0x14)
798[ 2.435074] lct QCOM-BATT: pl_fcc_vote_callback: pl_disable_votable effective total_fcc_ua =2500000
799[ 2.435081] lct QCOM-BATT: pl_fcc_vote_callback: pl_disable_votable effective total_fcc_ua =2500000 froce to 2000000
800[ 2.435096] smblib_adjust_jeita_cc_config fcc val_u = 2000000
801[ 2.435110] PMI: smblib_get_charge_param: jeita fcc reduction = 700000 (0x1c)
802[ 2.435115] lct smblib_adjust_jeita_cc_config jeita cc current_cc_minus_ua = 700000
803[ 2.435120] smblib_adjust_jeita_cc_config jeita cc have decreased
804[ 2.435126] PMI: smblib_set_charge_param: fast charge current = 2000000 (0x50)
805[ 2.435141] PMI: smblib_handle_wdog_bark: IRQ: determine-initial-status
806[ 2.435312] PMI: smblib_get_prop_usb_online: POWER_PATH_STATUS = 0x95
807[ 2.435327] PMI: smblib_get_prop_dc_online: POWER_PATH_STATUS = 0x95
808[ 2.435378] PMI: smblib_get_prop_usb_online: POWER_PATH_STATUS = 0x95
809[ 2.435393] PMI: smblib_get_prop_dc_online: POWER_PATH_STATUS = 0x95
810[ 2.435437] PMI: smblib_get_prop_batt_health: BATTERY_CHARGER_STATUS_2 = 0x80
811[ 2.441739] PMI: smblib_get_charge_param: input current limit status = 500000 (0x14)
812[ 2.441759] PMI: smblib_get_apsd_result: APSD_STATUS = 0x00
813[ 2.441784] PMI: smblib_set_charge_param: usb input current limit = 475000 (0x13)
814[ 2.441993] PMI: smblib_get_prop_batt_health: BATTERY_CHARGER_STATUS_2 = 0x80
815[ 2.442043] QPNP SMB2 probed successfully usb:present=1 type=0 batt:present = 1 health = 1 charge = 3
816[ 2.442127] PMI: smblib_get_prop_dc_online: POWER_PATH_STATUS = 0x95
817[ 2.442168] PMI: smblib_get_prop_dc_online: POWER_PATH_STATUS = 0x95
818[ 2.442194] PMI: smblib_get_prop_usb_online: POWER_PATH_STATUS = 0x95
819[ 2.442209] PMI: smblib_get_prop_dc_online: POWER_PATH_STATUS = 0x95
820[ 2.442262] PMI: smblib_get_prop_usb_online: POWER_PATH_STATUS = 0x95
821[ 2.442277] PMI: smblib_get_prop_dc_online: POWER_PATH_STATUS = 0x95
822[ 2.442320] PMI: smblib_get_prop_batt_health: BATTERY_CHARGER_STATUS_2 = 0x80
823[ 2.442490] PMI: smblib_get_prop_usb_online: POWER_PATH_STATUS = 0x95
824[ 2.442518] PMI: smblib_get_prop_usb_online: POWER_PATH_STATUS = 0x95
825[ 2.442536] PMI: smblib_get_charge_param: input current limit status = 500000 (0x14)
826[ 2.442565] PMI: smblib_get_charge_param: float voltage = 4395000 (0x79)
827[ 2.442582] PMI: smblib_get_charge_param: fast charge current = 2000000 (0x50)
828[ 2.442600] PMI: smblib_get_charge_param: input current limit status = 500000 (0x14)
829[ 2.442645] PMI: smblib_get_prop_usb_online: POWER_PATH_STATUS = 0x95
830[ 2.442678] PMI: smblib_get_prop_usb_online: POWER_PATH_STATUS = 0x95
831[ 2.442758] PMI: smblib_get_charge_param: input current limit status = 500000 (0x14)
832[ 2.442785] PMI: smblib_get_charge_param: input current limit status = 500000 (0x14)
833[ 2.442853] PMI: smblib_get_apsd_result: APSD_STATUS = 0x00
834[ 2.442877] PMI: smblib_get_charge_param: input current limit status = 500000 (0x14)
835[ 2.444892] qpnp_vadc_read: Error reading vadc_hc channel 80
836[ 2.444907] thermal thermal_zone1: failed to read out thermal zone (-517)
837[ 2.445083] qpnp_vadc_read: Error reading vadc_hc channel 78
838[ 2.445091] thermal thermal_zone2: failed to read out thermal zone (-517)
839[ 2.445271] qpnp_vadc_read: Error reading vadc_hc channel 79
840[ 2.445279] thermal thermal_zone3: failed to read out thermal zone (-517)
841[ 2.466209] msm_lmh_dcvs:lmh_activate_trip lmh_activate_trip: disable not supported
842[ 2.467120] msm_lmh_dcvs:lmh_activate_trip lmh_activate_trip: disable not supported
843[ 2.467525] md: linear personality registered for level -1
844[ 2.467667] device-mapper: uevent: version 1.0.3
845[ 2.468010] device-mapper: ioctl: 4.34.0-ioctl (2015-10-28) initialised: dm-devel@redhat.com
846[ 2.468138] device-mapper: req-crypt: dm-req-crypt successfully initalized.
847[ 2.468138]
848[ 2.468993] bt_power_populate_dt_pinfo: bt-reset-gpio not provided in device tree
849[ 2.469054] bt_dt_parse_vreg_info: qca,bt-vdd-io: is not provided in device tree
850[ 2.469061] bt_dt_parse_vreg_info: qca,bt-vdd-xtal: is not provided in device tree
851[ 2.469740] sdhci: Secure Digital Host Controller Interface driver
852[ 2.469747] sdhci: Copyright(c) Pierre Ossman
853[ 2.469755] sdhci-pltfm: SDHCI platform and OF driver helper
854[ 2.471625] qcom_ice_get_pdevice: found ice device ffffffc8750c7600
855[ 2.471633] qcom_ice_get_pdevice: matching platform device ffffffc8f7f11800
856[ 2.472353] ../../../../../../kernel/xiaomi/sdm660/drivers/leds/leds-qpnp-wled.c, 2360 auto_calib_enabled = 0
857[ 2.474022] ../../../../../../kernel/xiaomi/sdm660/drivers/leds/leds-qpnp-wled.c, 1344 auto_calib_enabled = 0<6>[ 2.474977] qcom_ice c0c8000.sdcc1ice: QC ICE 3.0.72 device found @0xffffff8009cf0000
858[ 2.475435] usbcore: registered new interface driver usbhid
859[ 2.475442] usbhid: USB HID core driver
860[ 2.475538] ashmem: initialized
861[ 2.475591] sdhci_msm c0c4000.sdhci: No vmmc regulator found
862[ 2.475600] sdhci_msm c0c4000.sdhci: No vqmmc regulator found
863[ 2.475786] wlan: Loading driver v5.1.1.28U ()
864[ 2.475966] mmc0: SDHCI controller on c0c4000.sdhci [c0c4000.sdhci] using 64-bit ADMA in CMDQ mode
865[ 2.476059] PMI: smblib_handle_usb_typec_change: Scheduling OTG work
866[ 2.476232] qpnp_coincell_charger_show_state: enabled=Y, voltage=3200 mV, resistance=2100 ohm
867[ 2.476585] wlan_hdd_state wlan major(230) initialized
868[ 2.476590] wlan: driver loaded
869[ 2.521192] PMI: smblib_uusb_otg_work: TYPE_C_STATUS_3 = 0x05 OTG=0
870[ 2.521237] PMI: smblib_get_prop_usb_online: POWER_PATH_STATUS = 0x95
871[ 2.521296] PMI: smblib_get_prop_usb_online: POWER_PATH_STATUS = 0x95
872[ 2.521437] PMI: smblib_get_charge_param: input current limit status = 75000 (0x03)
873[ 2.521468] PMI: smblib_get_charge_param: input current limit status = 75000 (0x03)
874[ 2.521537] PMI: smblib_get_apsd_result: APSD_STATUS = 0x00
875[ 2.521562] PMI: smblib_get_charge_param: input current limit status = 75000 (0x03)
876[ 2.562692] mmc0: Out-of-interrupt timeout is 50[ms]
877[ 2.562700] mmc0: eMMC FW version: 0xa2
878[ 2.562716] mmc0: CMDQ supported: depth: 32
879[ 2.562722] mmc0: cache barrier support 1 flush policy 1
880[ 2.570675] cmdq_host_alloc_tdl: desc_size: 1024 data_sz: 63488 slot-sz: 32
881[ 2.570969] mmc0: CMDQ enabled on card
882[ 2.570983] mmc0: new HS400 MMC card at address 0001
883[ 2.571831] sdhci_msm_pm_qos_cpu_init (): voted for group #0 (mask=0xf) latency=-1
884[ 2.571860] sdhci_msm_pm_qos_cpu_init (): voted for group #1 (mask=0xf0) latency=-1
885[ 2.571977] mmcblk0: mmc0:0001 HCG8a4 58.2 GiB
886[ 2.572273] mmcblk0rpmb: mmc0:0001 HCG8a4 partition 3 4.00 MiB
887[ 2.574762] mmcblk0: p1 p2 p3 p4 p5 p6 p7 p8 p9 p10 p11 p12 p13 p14 p15 p16 p17 p18 p19 p20 p21 p22 p23 p24 p25 p26 p27 p28 p29 p30 p31 p32 p33 p34 p35 p36 p37 p38 p39 p40 p41 p42 p43 p44 p45 p46 p47 p48 p49 p50 p51 p52 p53 p54 p55 p56 p57 p58 p59 p60 p61 p62 p63 p64
888[ 2.580081] mmc_ffu start,mid:144,name:HCG8a4,fw_ver:162
889[ 2.580087] mmc_ffu end
890[ 2.581815] sdhci_msm c084000.sdhci: sdhci_msm_probe: ICE device is not enabled
891[ 2.596203] sdhci_msm c084000.sdhci: No vmmc regulator found
892[ 2.596212] sdhci_msm c084000.sdhci: No vqmmc regulator found
893[ 2.596578] mmc1: SDHCI controller on c084000.sdhci [c084000.sdhci] using 64-bit ADMA in legacy mode
894[ 2.626160] bimc-bwmon 1008000.qcom,cpu-bwmon: BW HWmon governor registered.
895[ 2.627212] arm-memlat-mon soc:qcom,arm-memlat-mon-0: Memory Latency governor registered.
896[ 2.627250] arm-memlat-mon soc:qcom,arm-memlat-mon-4: Memory Latency governor registered.
897[ 2.628890] devfreq soc:qcom,cpubw: Couldn't update frequency transition information.
898[ 2.628979] devfreq soc:qcom,mincpubw: Couldn't update frequency transition information.
899[ 2.629058] devfreq soc:qcom,memlat-cpu0: Couldn't update frequency transition information.
900[ 2.629135] devfreq soc:qcom,memlat-cpu4: Couldn't update frequency transition information.
901[ 2.631613] hw perfevents: enabled with armv8_pmuv3 PMU driver, 7 counters available
902[ 2.632570] usbcore: registered new interface driver snd-usb-audio
903[ 2.635697] pmic_analog_codec 800f000.qcom,spmi:qcom,pm660l@3:analog-codec@f000: Adsp is not loaded yet 0
904[ 2.636072] tas2557 6-004c: tas2557_i2c_probe enter
905[ 2.636253] tas2557 6-004c: Looking up ti,bypass-tmax property in node /soc/i2c@c1b6000/tas2557@4c failed -22
906[ 2.670145] i2c-msm-v2 c1b6000.i2c: msm_bus_scale_register_client(mstr-id:84):0x1e (ok)
907[ 2.690222] tas2557 6-004c: PG2.1 Silicon found
908[ 2.690262] tas2557 6-004c: tas2557_register_codec, enter
909[ 2.690364] tas2557 6-004c: tas2557_register_misc, leave
910[ 2.690370] tas2557 6-004c: tiload_driver_init
911[ 2.690387] tas2557 6-004c: allocated Major Number: 227
912[ 2.690457] tas2557 6-004c: Registered TiLoad driver, Major number: 227
913[ 2.692045] msm_sdw_codec 152c1000.msm-sdw-codec: Adsp is not loaded yet 0
914[ 2.700488] msm-dai-tdm soc:qcom,msm-dai-tdm-pri-rx: msm_dai_tdm_q6_probe: dev_name: soc:qcom,msm-dai-tdm-pri-rx group_id: 0x9100
915[ 2.700710] msm-dai-q6-tdm soc:qcom,msm-dai-tdm-pri-rx:qcom,msm-dai-q6-tdm-pri-rx-0: msm_dai_q6_tdm_dev_probe: dev_name: soc:qcom,msm-dai-tdm-pri-rx:qcom,msm-dai-q6-tdm-pri-rx-0 dev_id: 0x9000
916[ 2.700723] msm-dai-q6-tdm soc:qcom,msm-dai-tdm-pri-rx:qcom,msm-dai-q6-tdm-pri-rx-0: msm_dai_q6_tdm_dev_probe: Custom tdm header not supported
917[ 2.700745] msm-dai-tdm soc:qcom,msm-dai-tdm-pri-tx: msm_dai_tdm_q6_probe: dev_name: soc:qcom,msm-dai-tdm-pri-tx group_id: 0x9101
918[ 2.700895] msm-dai-q6-tdm soc:qcom,msm-dai-tdm-pri-tx:qcom,msm-dai-q6-tdm-pri-tx-0: msm_dai_q6_tdm_dev_probe: dev_name: soc:qcom,msm-dai-tdm-pri-tx:qcom,msm-dai-q6-tdm-pri-tx-0 dev_id: 0x9001
919[ 2.700906] msm-dai-q6-tdm soc:qcom,msm-dai-tdm-pri-tx:qcom,msm-dai-q6-tdm-pri-tx-0: msm_dai_q6_tdm_dev_probe: Custom tdm header not supported
920[ 2.700925] msm-dai-tdm soc:qcom,msm-dai-tdm-sec-rx: msm_dai_tdm_q6_probe: dev_name: soc:qcom,msm-dai-tdm-sec-rx group_id: 0x9110
921[ 2.701061] msm-dai-q6-tdm soc:qcom,msm-dai-tdm-sec-rx:qcom,msm-dai-q6-tdm-sec-rx-0: msm_dai_q6_tdm_dev_probe: dev_name: soc:qcom,msm-dai-tdm-sec-rx:qcom,msm-dai-q6-tdm-sec-rx-0 dev_id: 0x9010
922[ 2.701070] msm-dai-q6-tdm soc:qcom,msm-dai-tdm-sec-rx:qcom,msm-dai-q6-tdm-sec-rx-0: msm_dai_q6_tdm_dev_probe: Custom tdm header not supported
923[ 2.701088] msm-dai-tdm soc:qcom,msm-dai-tdm-sec-tx: msm_dai_tdm_q6_probe: dev_name: soc:qcom,msm-dai-tdm-sec-tx group_id: 0x9111
924[ 2.701223] msm-dai-q6-tdm soc:qcom,msm-dai-tdm-sec-tx:qcom,msm-dai-q6-tdm-sec-tx-0: msm_dai_q6_tdm_dev_probe: dev_name: soc:qcom,msm-dai-tdm-sec-tx:qcom,msm-dai-q6-tdm-sec-tx-0 dev_id: 0x9011
925[ 2.701233] msm-dai-q6-tdm soc:qcom,msm-dai-tdm-sec-tx:qcom,msm-dai-q6-tdm-sec-tx-0: msm_dai_q6_tdm_dev_probe: Custom tdm header not supported
926[ 2.701254] msm-dai-tdm soc:qcom,msm-dai-tdm-tert-rx: msm_dai_tdm_q6_probe: dev_name: soc:qcom,msm-dai-tdm-tert-rx group_id: 0x9120
927[ 2.701387] msm-dai-q6-tdm soc:qcom,msm-dai-tdm-tert-rx:qcom,msm-dai-q6-tdm-tert-rx-0: msm_dai_q6_tdm_dev_probe: dev_name: soc:qcom,msm-dai-tdm-tert-rx:qcom,msm-dai-q6-tdm-tert-rx-0 dev_id: 0x9020
928[ 2.701397] msm-dai-q6-tdm soc:qcom,msm-dai-tdm-tert-rx:qcom,msm-dai-q6-tdm-tert-rx-0: msm_dai_q6_tdm_dev_probe: Custom tdm header not supported
929[ 2.701415] msm-dai-tdm soc:qcom,msm-dai-tdm-tert-tx: msm_dai_tdm_q6_probe: dev_name: soc:qcom,msm-dai-tdm-tert-tx group_id: 0x9121
930[ 2.701547] msm-dai-q6-tdm soc:qcom,msm-dai-tdm-tert-tx:qcom,msm-dai-q6-tdm-tert-tx-0: msm_dai_q6_tdm_dev_probe: dev_name: soc:qcom,msm-dai-tdm-tert-tx:qcom,msm-dai-q6-tdm-tert-tx-0 dev_id: 0x9021
931[ 2.701557] msm-dai-q6-tdm soc:qcom,msm-dai-tdm-tert-tx:qcom,msm-dai-q6-tdm-tert-tx-0: msm_dai_q6_tdm_dev_probe: Custom tdm header not supported
932[ 2.701574] msm-dai-tdm soc:qcom,msm-dai-tdm-quat-rx: msm_dai_tdm_q6_probe: dev_name: soc:qcom,msm-dai-tdm-quat-rx group_id: 0x9130
933[ 2.701704] msm-dai-q6-tdm soc:qcom,msm-dai-tdm-quat-rx:qcom,msm-dai-q6-tdm-quat-rx-0: msm_dai_q6_tdm_dev_probe: dev_name: soc:qcom,msm-dai-tdm-quat-rx:qcom,msm-dai-q6-tdm-quat-rx-0 dev_id: 0x9030
934[ 2.701714] msm-dai-q6-tdm soc:qcom,msm-dai-tdm-quat-rx:qcom,msm-dai-q6-tdm-quat-rx-0: msm_dai_q6_tdm_dev_probe: Custom tdm header not supported
935[ 2.701733] msm-dai-tdm soc:qcom,msm-dai-tdm-quat-tx: msm_dai_tdm_q6_probe: dev_name: soc:qcom,msm-dai-tdm-quat-tx group_id: 0x9131
936[ 2.701866] msm-dai-q6-tdm soc:qcom,msm-dai-tdm-quat-tx:qcom,msm-dai-q6-tdm-quat-tx-0: msm_dai_q6_tdm_dev_probe: dev_name: soc:qcom,msm-dai-tdm-quat-tx:qcom,msm-dai-q6-tdm-quat-tx-0 dev_id: 0x9031
937[ 2.701876] msm-dai-q6-tdm soc:qcom,msm-dai-tdm-quat-tx:qcom,msm-dai-q6-tdm-quat-tx-0: msm_dai_q6_tdm_dev_probe: Custom tdm header not supported
938[ 2.708120] pri_i2s_gpio_init:enter.
939[ 2.708471] sdm660-asoc-snd soc:sound: msm_internal_init: default codec configured
940[ 2.715014] sdm660-asoc-snd soc:sound: ASoC: platform (null) not registered
941[ 2.715305] GACT probability NOT on
942[ 2.715319] Mirror/redirect action on
943[ 2.715342] u32 classifier
944[ 2.715345] Actions configured
945[ 2.715373] Netfilter messages via NETLINK v0.30.
946[ 2.715405] nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
947[ 2.715612] ctnetlink v0.93: registering with nfnetlink.
948[ 2.715922] xt_time: kernel timezone is -0000
949[ 2.716076] ip_tables: (C) 2000-2006 Netfilter Core Team
950[ 2.716152] arp_tables: (C) 2002 David S. Miller
951[ 2.716182] Initializing XFRM netlink socket
952[ 2.716348] NET: Registered protocol family 10
953[ 2.716930] mip6: Mobile IPv6
954[ 2.716943] ip6_tables: (C) 2000-2006 Netfilter Core Team
955[ 2.717023] sit: IPv6 over IPv4 tunneling driver
956[ 2.717226] NET: Registered protocol family 17
957[ 2.717240] NET: Registered protocol family 15
958[ 2.717264] bridge: automatic filtering via arp/ip/ip6tables has been deprecated. Update your scripts to load br_netfilter if you need this.
959[ 2.717272] Ebtables v2.0 registered
960[ 2.717335] l2tp_core: L2TP core driver, V2.0
961[ 2.717344] l2tp_ppp: PPPoL2TP kernel driver, V2.0
962[ 2.717351] l2tp_ip: L2TP IP encapsulation support (L2TPv3)
963[ 2.717365] l2tp_netlink: L2TP netlink interface
964[ 2.717389] l2tp_eth: L2TP ethernet pseudowire support (L2TPv3)
965[ 2.717395] l2tp_ip6: L2TP IP encapsulation support for IPv6 (L2TPv3)
966[ 2.717942] NET: Registered protocol family 27
967[ 2.723340] mdss_dp_usbpd_setup: get_usbpd phandle failed (-19)
968[ 2.723350] mdss_dp_probe: Error usbpd setup!
969[ 2.724421] subsys-pil-tz 15700000.qcom,lpass: for adsp segments only will be dumped.
970[ 2.726549] pil-q6v5-mss 4080000.qcom,mss: No pas_id found.
971[ 2.727256] platform 4080000.qcom,mss:qcom,mba-mem@0: assigned reserved memory node pil_mba_region@94800000
972[ 2.727689] pil-q6v5-mss 4080000.qcom,mss: for modem segments only will be dumped.
973[ 2.727785] pil-q6v5-mss 4080000.qcom,mss: for md_modem segments only will be dumped.
974[ 2.731066] sps:BAM 0x000000000a904000 is registered.
975[ 2.731453] msm-dwc3 a800000.ssusb: charger detection in progress
976[ 2.733847] mmc1: new ultra high speed SDR104 SDHC card at address 0001
977[ 2.734263] sdhci_msm_pm_qos_cpu_init (): voted for group #0 (mask=0xf) latency=-1
978[ 2.734274] sdhci_msm_pm_qos_cpu_init (): voted for group #1 (mask=0xf0) latency=-1
979[ 2.734350] mmcblk1: mmc1:0001 SD 14.7 GiB
980[ 2.735598] mmcblk1: p1
981[ 2.735855] mmc_ffu start,mid:18,name:SD,fw_ver:0
982[ 2.735860] mmc_ffu end
983[ 2.737741] thermal thermal_zone25: failed to read out thermal zone (-19)
984[ 2.739954] FG: fg_gen3_probe: battery SOC:76 voltage: 4099110uV temp: 280 id: 0KOhms
985[ 2.740157] FG: fg_psy_get_property: unsupported property 4
986[ 2.740438] PMI: smblib_get_prop_usb_online: POWER_PATH_STATUS = 0x95
987[ 2.740453] PMI: smblib_get_prop_dc_online: POWER_PATH_STATUS = 0x95
988[ 2.740506] PMI: smblib_get_prop_usb_online: POWER_PATH_STATUS = 0x95
989[ 2.740519] PMI: smblib_get_prop_dc_online: POWER_PATH_STATUS = 0x95
990[ 2.740557] PMI: smblib_get_prop_batt_health: BATTERY_CHARGER_STATUS_2 = 0x80
991[ 2.741184] pmic_analog_codec 800f000.qcom,spmi:qcom,pm660l@3:analog-codec@f000: Adsp is not loaded yet 0
992[ 2.741731] msm_sdw_codec 152c1000.msm-sdw-codec: Adsp is not loaded yet 0
993[ 2.741802] FG: fg_get_time_to_full_locked: battery profile is not loaded
994[ 2.742698] PMI: smblib_get_prop_usb_online: POWER_PATH_STATUS = 0x95
995[ 2.742712] PMI: smblib_get_prop_dc_online: POWER_PATH_STATUS = 0x95
996[ 2.744013] PMI: smblib_get_prop_usb_online: POWER_PATH_STATUS = 0x95
997[ 2.744032] PMI: smblib_get_prop_usb_online: POWER_PATH_STATUS = 0x95
998[ 2.744046] PMI: smblib_get_prop_dc_online: POWER_PATH_STATUS = 0x95
999[ 2.744097] pri_i2s_gpio_init:enter.
1000[ 2.744438] sdm660-asoc-snd soc:sound: msm_internal_init: default codec configured
1001[ 2.750869] sdm660-asoc-snd soc:sound: ASoC: platform (null) not registered
1002[ 2.751352] mdss_dp_usbpd_setup: get_usbpd phandle failed (-19)
1003[ 2.751358] mdss_dp_probe: Error usbpd setup!
1004[ 2.752157] Registered cp15_barrier emulation handler
1005[ 2.752177] Registered setend emulation handler
1006[ 2.752232] core_ctl: Creating CPU group 0
1007[ 2.752236] core_ctl: Init CPU0 state
1008[ 2.752239] core_ctl: Init CPU1 state
1009[ 2.752242] core_ctl: Init CPU2 state
1010[ 2.752245] core_ctl: Init CPU3 state
1011[ 2.752347] core_ctl: Creating CPU group 4
1012[ 2.752352] core_ctl: Init CPU4 state
1013[ 2.752355] core_ctl: Init CPU5 state
1014[ 2.752358] core_ctl: Init CPU6 state
1015[ 2.752360] core_ctl: Init CPU7 state
1016[ 2.752803] registered taskstats version 1
1017[ 2.752822] Loading compiled-in X.509 certificates
1018[ 2.753234] Loaded X.509 cert 'Android: 7e4333f9bba00adfe0ede979e28ed1920492b40f'
1019[ 2.754260] Key type encrypted registered
1020[ 2.755828] msm_smem 86000000.qcom,smem: for smem segments only will be dumped.
1021[ 2.755986] spss_utils [spss_init]: spss-utils driver Ver 1.2 13-Jan-2017.
1022[ 2.756633] AXI: msm_bus_debugfs_init(): msm-bus-dbg feature is disabled
1023[ 2.756925] scm_call failed: func id 0x42001601, ret: -2, syscall returns: 0x0, 0x0, 0x0
1024[ 2.757157] fastrpc soc:qcom,msm-adsprpc-mem: for adsp_rh segments only will be dumped.
1025[ 2.757244] ADSPRPC: gcinfo[0].heap_vmid 33
1026[ 2.757427] iommu: Adding device soc:qcom,msm_fastrpc:qcom,msm_fastrpc_compute_cb1 to group 19
1027[ 2.758216] iommu: Adding device soc:qcom,msm_fastrpc:qcom,msm_fastrpc_compute_cb2 to group 20
1028[ 2.758838] iommu: Adding device soc:qcom,msm_fastrpc:qcom,msm_fastrpc_compute_cb3 to group 21
1029[ 2.759401] iommu: Adding device soc:qcom,msm_fastrpc:qcom,msm_fastrpc_compute_cb4 to group 22
1030[ 2.760950] pmic_analog_codec 800f000.qcom,spmi:qcom,pm660l@3:analog-codec@f000: Adsp is not loaded yet 0
1031[ 2.761212] msm_sdw_codec 152c1000.msm-sdw-codec: Adsp is not loaded yet 0
1032[ 2.762474] pri_i2s_gpio_init:enter.
1033[ 2.762949] sdm660-asoc-snd soc:sound: msm_internal_init: default codec configured
1034[ 2.771168] sdm660-asoc-snd soc:sound: ASoC: platform (null) not registered
1035[ 2.771651] mdss_dp_usbpd_setup: get_usbpd phandle failed (-19)
1036[ 2.771657] mdss_dp_probe: Error usbpd setup!
1037[ 2.772681] pmic_analog_codec 800f000.qcom,spmi:qcom,pm660l@3:analog-codec@f000: Adsp is not loaded yet 0
1038[ 2.772865] msm_sdw_codec 152c1000.msm-sdw-codec: Adsp is not loaded yet 0
1039[ 2.773148] RNDIS_IPA module is loaded.
1040[ 2.773743] pri_i2s_gpio_init:enter.
1041[ 2.774134] sdm660-asoc-snd soc:sound: msm_internal_init: default codec configured
1042[ 2.775618] input: gpio-keys as /devices/soc/soc:gpio_keys/input/input6
1043[ 2.777646] qcom,qpnp-rtc 800f000.qcom,spmi:qcom,pm660@0:qcom,pm660_rtc: setting system clock to 1970-11-27 19:37:51 UTC (28582671)
1044[ 2.781027] sdm660-asoc-snd soc:sound: ASoC: platform (null) not registered
1045[ 2.781758] mdss_dp_usbpd_setup: get_usbpd phandle failed (-19)
1046[ 2.781765] mdss_dp_probe: Error usbpd setup!
1047[ 2.782005] msm-core initialized without polling period
1048[ 2.782194] pmic_analog_codec 800f000.qcom,spmi:qcom,pm660l@3:analog-codec@f000: Adsp is not loaded yet 0
1049[ 2.782473] msm_sdw_codec 152c1000.msm-sdw-codec: Adsp is not loaded yet 0
1050[ 2.783221] pri_i2s_gpio_init:enter.
1051[ 2.783622] sdm660-asoc-snd soc:sound: msm_internal_init: default codec configured
1052[ 2.790260] sdm660-asoc-snd soc:sound: ASoC: platform (null) not registered
1053[ 2.790807] mdss_dp_usbpd_setup: get_usbpd phandle failed (-19)
1054[ 2.790814] mdss_dp_probe: Error usbpd setup!
1055[ 2.791488] pmic_analog_codec 800f000.qcom,spmi:qcom,pm660l@3:analog-codec@f000: Adsp is not loaded yet 0
1056[ 2.791504] lmh_lite:lmh_parse_sensor Registering sensor:[GLM_soc]
1057[ 2.791609] msm_sdw_codec 152c1000.msm-sdw-codec: Adsp is not loaded yet 0
1058[ 2.791695] lmh_lite:lmh_parse_sensor Registering sensor:[LLM_cp1-]
1059[ 2.791828] lmh_lite:lmh_parse_sensor Registering sensor:[LLM_cp0-]
1060[ 2.792046] soc:qcom,lmh supply vdd-apss not found, using dummy regulator
1061[ 2.792081] lmh_lite:lmh_get_sensor_devicetree Error getting ODCM thresh. err:-22
1062[ 2.792328] pri_i2s_gpio_init:enter.
1063[ 2.792655] sdm660-asoc-snd soc:sound: msm_internal_init: default codec configured
1064[ 2.799403] sdm660-asoc-snd soc:sound: ASoC: platform (null) not registered
1065[ 2.799845] calculate_residency: residency < 0 for LPM
1066[ 2.799854] parse_cpu_levels: idx 1 172
1067[ 2.799858] parse_cpu_levels: idx 2 1181
1068[ 2.799862] parse_cpu_levels: idx 2 2009
1069[ 2.799868] calculate_residency: residency < 0 for LPM
1070[ 2.799929] parse_cpu_levels: idx 1 191
1071[ 2.799932] parse_cpu_levels: idx 2 1109
1072[ 2.799936] parse_cpu_levels: idx 2 2410
1073[ 2.799941] mdss_dp_usbpd_setup: get_usbpd phandle failed (-19)
1074[ 2.799942] calculate_residency: residency < 0 for LPM
1075[ 2.799948] mdss_dp_probe: Error usbpd setup!
1076[ 2.800412] pmic_analog_codec 800f000.qcom,spmi:qcom,pm660l@3:analog-codec@f000: Adsp is not loaded yet 0
1077[ 2.800533] msm_sdw_codec 152c1000.msm-sdw-codec: Adsp is not loaded yet 0
1078[ 2.801360] pri_i2s_gpio_init:enter.
1079[ 2.801745] sdm660-asoc-snd soc:sound: msm_internal_init: default codec configured
1080[ 2.808360] sdm660-asoc-snd soc:sound: ASoC: platform (null) not registered
1081[ 2.808858] mdss_dp_usbpd_setup: get_usbpd phandle failed (-19)
1082[ 2.808865] mdss_dp_probe: Error usbpd setup!
1083[ 2.809272] pmic_analog_codec 800f000.qcom,spmi:qcom,pm660l@3:analog-codec@f000: Adsp is not loaded yet 0
1084[ 2.809421] msm_sdw_codec 152c1000.msm-sdw-codec: Adsp is not loaded yet 0
1085[ 2.810327] pri_i2s_gpio_init:enter.
1086[ 2.810674] sdm660-asoc-snd soc:sound: msm_internal_init: default codec configured
1087[ 2.811065] rmnet_ipa started initialization
1088[ 2.811103] IPA SSR support = True
1089[ 2.811145] IPA ipa-loaduC = True
1090[ 2.811149] IPA SG support = True
1091[ 2.811186] IPA Napi Enable = False
1092[ 2.811227] using default for wan-rx-desc-size = 1024
1093[ 2.813180] ipa ipa_sps_irq_control_all:963 EP (5) not allocated.
1094[ 2.813190] ipa ipa2_uc_state_check:301 uC is not loaded
1095[ 2.814061] rmnet_ipa completed initialization
1096[ 2.817081] sdm660-asoc-snd soc:sound: ASoC: platform (null) not registered
1097[ 2.817643] mdss_dp_usbpd_setup: get_usbpd phandle failed (-19)
1098[ 2.817649] mdss_dp_probe: Error usbpd setup!
1099[ 2.818164] pmic_analog_codec 800f000.qcom,spmi:qcom,pm660l@3:analog-codec@f000: Adsp is not loaded yet 0
1100[ 2.818286] msm_sdw_codec 152c1000.msm-sdw-codec: Adsp is not loaded yet 0
1101[ 2.819010] pri_i2s_gpio_init:enter.
1102[ 2.819341] sdm660-asoc-snd soc:sound: msm_internal_init: default codec configured
1103[ 2.825713] sdm660-asoc-snd soc:sound: ASoC: platform (null) not registered
1104[ 2.826380] gfx_mem_acc_corner: disabling
1105[ 2.826391] apc0_pwrcl_corner: disabling
1106[ 2.826396] apc1_perfcl_corner: disabling
1107[ 2.826401] cam_avdd_gpio_regulator: disabling
1108[ 2.826406] cam_rear_avdd_gpio_regulator: disabling
1109[ 2.826409] cam_rear_dvdd_gpio_regulator: disabling
1110[ 2.826418] gdsc_ufs: disabling
1111[ 2.826435] gdsc_venus: disabling
1112[ 2.826463] regulator_proxy_consumer_remove_all: removing regulator proxy consumer requests
1113[ 2.828418] ALSA device list:
1114[ 2.828424] No soundcards found.
1115[ 2.828487] Warning: unable to open an initial console.
1116[ 2.832620] Freeing unused kernel memory: 10240K (ffffff8393600000 - ffffff8394000000)
1117[ 2.945547] PMI: smblib_get_prop_usb_online: POWER_PATH_STATUS = 0x95
1118[ 2.945572] PMI: smblib_get_prop_dc_online: POWER_PATH_STATUS = 0x95
1119[ 2.945615] PMI: smblib_get_prop_batt_health: BATTERY_CHARGER_STATUS_2 = 0x80
1120[ 3.150398] of_batterydata_get_best_profile: l6650sun_4000mah_averaged_masterslave_sept27th2017 found
1121[ 3.242296] PMI: smblib_handle_usb_source_change: APSD_STATUS = 0x01
1122[ 3.242304] PMI: smblib_handle_usb_source_change: chg->real_charger_type = 0x00
1123[ 3.242319] PMI: smblib_get_apsd_result: APSD_STATUS = 0x01
1124[ 3.242334] PMI: smblib_update_usb_type: lct battery charge APSD=SDP PD=0
1125[ 3.242343] lct QCOM-BATT: usb_icl_vote_callback: icl_ua <= 1300000 disable parallel charger smb1351
1126[ 3.242363] PMI: smblib_get_charge_param: input current limit status = 75000 (0x03)
1127[ 3.242378] PMI: smblib_get_apsd_result: APSD_STATUS = 0x01
1128[ 3.242413] PMI: smblib_set_charge_param: usb input current limit = 50000 (0x02)
1129[ 3.242469] PMI: smblib_get_apsd_result: APSD_STATUS = 0x01
1130[ 3.242499] PMI: smblib_set_charge_param: usb input current limit = 500000 (0x14)
1131[ 3.242597] PMI: smblib_handle_apsd_done: IRQ: apsd-done rising; SDP detected
1132[ 3.242612] PMI: smblib_get_apsd_result: APSD_STATUS = 0x01
1133[ 3.242627] PMI: smblib_handle_hvdcp_check_timeout: IRQ: smblib_handle_hvdcp_check_timeout falling
1134[ 3.242632] PMI: smblib_handle_sdp_enumeration_done: IRQ: sdp-enumeration-done falling
1135[ 3.242638] PMI: smblib_handle_slow_plugin_timeout: IRQ: slow-plugin-timeout falling
1136[ 3.245480] msm-dwc3 a800000.ssusb: DWC3 exited from low power mode
1137[ 3.253220] PMI: smblib_get_charge_param: input current limit status = 75000 (0x03)
1138[ 3.264133] PMI: smblib_get_charge_param: input current limit status = 100000 (0x04)
1139[ 3.275062] PMI: smblib_get_charge_param: input current limit status = 125000 (0x05)
1140[ 3.285993] PMI: smblib_get_charge_param: input current limit status = 150000 (0x06)
1141[ 3.296918] PMI: smblib_get_charge_param: input current limit status = 175000 (0x07)
1142[ 3.307851] PMI: smblib_get_charge_param: input current limit status = 200000 (0x08)
1143[ 3.318778] PMI: smblib_get_charge_param: input current limit status = 225000 (0x09)
1144[ 3.329708] PMI: smblib_get_charge_param: input current limit status = 250000 (0x0a)
1145[ 3.340638] PMI: smblib_get_charge_param: input current limit status = 275000 (0x0b)
1146[ 3.345072] PMI: smblib_handle_usb_source_change: APSD_STATUS = 0x01
1147[ 3.345127] PMI: smblib_get_charge_param: float voltage = 4395000 (0x79)
1148[ 3.345144] PMI: smblib_get_charge_param: fast charge current = 2000000 (0x50)
1149[ 3.345163] PMI: smblib_get_charge_param: input current limit status = 275000 (0x0b)
1150[ 3.345202] PMI: smblib_get_charge_param: usb input current limit = 500000 (0x14)
1151[ 3.345242] PMI: smblib_get_prop_usb_online: POWER_PATH_STATUS = 0x95
1152[ 3.345278] PMI: smblib_get_prop_usb_online: POWER_PATH_STATUS = 0x95
1153[ 3.345515] PMI: smblib_get_prop_usb_online: POWER_PATH_STATUS = 0x95
1154[ 3.345531] PMI: smblib_get_prop_dc_online: POWER_PATH_STATUS = 0x95
1155[ 3.345933] PMI: smblib_get_charge_param: float voltage = 4395000 (0x79)
1156[ 3.345990] PMI: smblib_get_charge_param: fast charge current = 2000000 (0x50)
1157[ 3.346029] PMI: smblib_get_charge_param: input current limit status = 275000 (0x0b)
1158[ 3.346101] PMI: smblib_get_charge_param: usb input current limit = 500000 (0x14)
1159[ 3.346862] PMI: smblib_get_prop_usb_online: POWER_PATH_STATUS = 0x95
1160[ 3.346877] PMI: smblib_get_prop_usb_online: POWER_PATH_STATUS = 0x95
1161[ 3.346893] PMI: smblib_get_prop_dc_online: POWER_PATH_STATUS = 0x95
1162[ 3.351571] PMI: smblib_get_charge_param: input current limit status = 300000 (0x0c)
1163[ 3.362498] PMI: smblib_get_charge_param: input current limit status = 325000 (0x0d)
1164[ 3.373432] PMI: smblib_get_charge_param: input current limit status = 350000 (0x0e)
1165[ 3.384361] PMI: smblib_get_charge_param: input current limit status = 375000 (0x0f)
1166[ 3.395294] PMI: smblib_get_charge_param: input current limit status = 400000 (0x10)
1167[ 3.406221] PMI: smblib_get_charge_param: input current limit status = 425000 (0x11)
1168[ 3.417151] PMI: smblib_get_charge_param: input current limit status = 450000 (0x12)
1169[ 3.428084] PMI: smblib_get_charge_param: input current limit status = 475000 (0x13)
1170[ 3.439014] PMI: smblib_get_charge_param: input current limit status = 500000 (0x14)
1171[ 3.439045] PMI: smblib_get_charge_param: input current limit status = 500000 (0x14)
1172[ 3.439053] PMI: smblib_icl_change_work: icl_settled=500000
1173[ 3.439080] PMI: smblib_get_charge_param: float voltage = 4395000 (0x79)
1174[ 3.439096] PMI: smblib_get_charge_param: fast charge current = 2000000 (0x50)
1175[ 3.439114] PMI: smblib_get_charge_param: input current limit status = 500000 (0x14)
1176[ 3.439149] PMI: smblib_get_charge_param: usb input current limit = 500000 (0x14)
1177[ 3.439561] PMI: smblib_get_charge_param: float voltage = 4395000 (0x79)
1178[ 3.439580] PMI: smblib_get_charge_param: fast charge current = 2000000 (0x50)
1179[ 3.439598] PMI: smblib_get_charge_param: input current limit status = 500000 (0x14)
1180[ 3.439634] PMI: smblib_get_charge_param: usb input current limit = 500000 (0x14)
1181[ 3.440632] IPC_RTR: msm_ipc_router_smd_driver_register Already driver registered IPCRTR
1182[ 3.440639] IPC_RTR: msm_ipc_router_smd_driver_register Already driver registered IPCRTR
1183[ 3.447531] PMI: smblib_get_charge_param: input current limit status = 500000 (0x14)
1184[ 3.447560] PMI: smblib_get_charge_param: input current limit status = 500000 (0x14)
1185[ 3.549954] PMI: smblib_get_apsd_result: APSD_STATUS = 0x01
1186[ 3.549987] PMI: smblib_get_charge_param: input current limit status = 500000 (0x14)
1187[ 3.550583] PMI: smblib_get_prop_usb_online: POWER_PATH_STATUS = 0x95
1188[ 3.650974] PMI: smblib_get_charge_param: input current limit status = 500000 (0x14)
1189[ 3.651022] PMI: smblib_get_charge_param: input current limit status = 500000 (0x14)
1190[ 3.751419] PMI: smblib_get_apsd_result: APSD_STATUS = 0x01
1191[ 3.751452] PMI: smblib_get_charge_param: input current limit status = 500000 (0x14)
1192[ 4.576220] sps: BAM device 0x000000000c144000 is not registered yet.
1193[ 4.576370] sps:BAM 0x000000000c144000 is registered.
1194[ 4.576602] sps:BAM 0x000000000c144000 (va:0xffffff800b320000) enabled: ver:0x19, number of pipes:12
1195[ 4.583169] lockdown info =46, 36, 32, 01, e7, 53, 31, 00
1196[ 4.597928] synaptics_dsx_i2c 1-0020: udg_reg_init: User defined gesture support unavailable (missing data registers)
1197[ 4.597937] synaptics_dsx_i2c 1-0020: udg_scan_pdt: Failed to initialize user defined gesture registers
1198[ 5.010137] QCOM-STEPCHG: handle_jeita: VBATT = 280 FCC = 2500000uA FV = 4400000uV
1199[ 5.141605] EXT4-fs (mmcblk0p64): couldn't mount as ext3 due to feature incompatibilities
1200[ 5.145194] EXT4-fs (mmcblk0p64): warning: maximal mount count reached, running e2fsck is recommended
1201[ 5.153280] EXT4-fs (mmcblk0p64): recovery complete
1202[ 5.153294] EXT4-fs (mmcblk0p64): mounted filesystem with ordered data mode. Opts: (null)
1203[ 5.212868] ipa ipa2_uc_state_check:301 uC is not loaded
1204[ 5.212907] ipa ipa_sps_irq_control_all:963 EP (5) not allocated.
1205[ 5.213880] ipa ipa_sps_irq_control_all:963 EP (5) not allocated.
1206[ 5.213888] ipa ipa2_uc_state_check:301 uC is not loaded
1207[ 5.215268] RNDIS_IPA NetDev was initialized
1208[ 5.219563] RNDIS_IPA NetDev was opened
1209[ 5.219652] IPv6: ADDRCONF(NETDEV_UP): rndis0: link is not ready
1210[ 5.363195] msm-dwc3 a800000.ssusb: Avail curr from USB = 100
1211[ 5.363217] lct QCOM-BATT: usb_icl_vote_callback: icl_ua <= 1300000 disable parallel charger smb1351
1212[ 5.363241] PMI: smblib_get_charge_param: input current limit status = 500000 (0x14)
1213[ 5.363257] PMI: smblib_get_apsd_result: APSD_STATUS = 0x01
1214[ 5.363295] PMI: smblib_set_charge_param: usb input current limit = 100000 (0x04)
1215[ 5.440080] lct QCOM-BATT: handle_main_charge_type: chip->charge_type =3, pval.intval=3
1216[ 5.440087] lct QCOM-BATT: handle_main_charge_type: chg_state enabling parallel
1217[ 5.440102] PMI: smblib_get_charge_param: input current limit status = 100000 (0x04)
1218[ 5.440118] lct QCOM-BATT: handle_settled_icl_change: main_limited=1, main_settled_ua=100000, chip->pl_settled_ua=0 ,total_current_ua=100000
1219[ 5.440124] lct QCOM-BATT: handle_settled_icl_change: total_current_ua <= 1300000 disable parallel charger smb1351
1220[ 5.491614] android_work: sent uevent USB_STATE=CONNECTED
1221[ 5.495165] android_work: sent uevent USB_STATE=DISCONNECTED
1222[ 5.639953] android_work: sent uevent USB_STATE=CONNECTED
1223[ 5.640474] configfs-gadget gadget: high-speed config #1: c
1224[ 5.640725] msm-dwc3 a800000.ssusb: Avail curr from USB = 500
1225[ 5.640737] lct QCOM-BATT: usb_icl_vote_callback: icl_ua <= 1300000 disable parallel charger smb1351
1226[ 5.640970] PMI: smblib_get_charge_param: input current limit status = 100000 (0x04)
1227[ 5.640985] PMI: smblib_get_apsd_result: APSD_STATUS = 0x01
1228[ 5.641266] PMI: smblib_set_charge_param: usb input current limit = 75000 (0x03)
1229[ 5.641865] PMI: smblib_get_apsd_result: APSD_STATUS = 0x01
1230[ 5.642292] PMI: smblib_set_charge_param: usb input current limit = 500000 (0x14)
1231[ 5.642347] android_work: sent uevent USB_STATE=CONFIGURED
1232[ 5.642542] sps:BAM 0x000000000a904000 (va:0xffffff800b120000) enabled: ver:0x27, number of pipes:4
1233[ 5.642793] ipa ipa2_uc_state_check:301 uC is not loaded
1234[ 5.642823] ipa ipa_sps_irq_control_all:963 EP (5) not allocated.
1235[ 5.644835] RNDIS_IPA NetDev pipes were connected
1236[ 5.644910] IPv6: ADDRCONF(NETDEV_CHANGE): rndis0: link becomes ready
1237[ 5.653160] PMI: smblib_get_charge_param: input current limit status = 100000 (0x04)
1238[ 5.664060] PMI: smblib_get_charge_param: input current limit status = 125000 (0x05)
1239[ 5.674984] PMI: smblib_get_charge_param: input current limit status = 150000 (0x06)
1240[ 5.685913] PMI: smblib_get_charge_param: input current limit status = 175000 (0x07)
1241[ 5.696844] PMI: smblib_get_charge_param: input current limit status = 200000 (0x08)
1242[ 5.707776] PMI: smblib_get_charge_param: input current limit status = 225000 (0x09)
1243[ 5.718706] PMI: smblib_get_charge_param: input current limit status = 250000 (0x0a)
1244[ 5.729638] PMI: smblib_get_charge_param: input current limit status = 275000 (0x0b)
1245[ 5.740568] PMI: smblib_get_charge_param: input current limit status = 300000 (0x0c)
1246[ 5.751496] PMI: smblib_get_charge_param: input current limit status = 325000 (0x0d)
1247[ 5.762427] PMI: smblib_get_charge_param: input current limit status = 350000 (0x0e)
1248[ 5.773359] PMI: smblib_get_charge_param: input current limit status = 375000 (0x0f)
1249[ 5.784287] PMI: smblib_get_charge_param: input current limit status = 400000 (0x10)
1250[ 5.795217] PMI: smblib_get_charge_param: input current limit status = 425000 (0x11)
1251[ 5.806151] PMI: smblib_get_charge_param: input current limit status = 450000 (0x12)
1252[ 5.817082] PMI: smblib_get_charge_param: input current limit status = 475000 (0x13)
1253[ 5.828013] PMI: smblib_get_charge_param: input current limit status = 500000 (0x14)
1254[ 5.828049] PMI: smblib_get_charge_param: input current limit status = 500000 (0x14)
1255[ 5.828057] PMI: smblib_icl_change_work: icl_settled=500000
1256[ 5.828102] PMI: smblib_get_charge_param: float voltage = 4395000 (0x79)
1257[ 5.828119] PMI: smblib_get_charge_param: fast charge current = 2000000 (0x50)
1258[ 5.828138] PMI: smblib_get_charge_param: input current limit status = 500000 (0x14)
1259[ 5.828176] PMI: smblib_get_charge_param: usb input current limit = 500000 (0x14)
1260[ 5.828215] lct QCOM-BATT: handle_main_charge_type: chip->charge_type =3, pval.intval=3
1261[ 5.828221] lct QCOM-BATT: handle_main_charge_type: chg_state enabling parallel
1262[ 5.828236] PMI: smblib_get_charge_param: input current limit status = 500000 (0x14)
1263[ 5.828253] lct QCOM-BATT: handle_settled_icl_change: main_limited=1, main_settled_ua=500000, chip->pl_settled_ua=0 ,total_current_ua=500000
1264[ 5.828258] lct QCOM-BATT: handle_settled_icl_change: total_current_ua <= 1300000 disable parallel charger smb1351
1265[ 5.828741] PMI: smblib_get_charge_param: float voltage = 4395000 (0x79)
1266[ 5.828760] PMI: smblib_get_charge_param: fast charge current = 2000000 (0x50)
1267[ 5.828779] PMI: smblib_get_charge_param: input current limit status = 500000 (0x14)
1268[ 5.828817] PMI: smblib_get_charge_param: usb input current limit = 500000 (0x14)
1269[ 32.480064] PMI: smblib_pl_enable_work: timer expired, enabling parallel
1270[ 34.170061] synaptics_dsx_i2c 1-0020: fwu_startup_fw_update_work: Timed out waiting for FB ready
1271[ 62.690108] tas2557 6-004c: tas2557_fw_ready:
1272[ 62.690116] tas2557 6-004c: tas2557_uCDSP.bin firmware is not loaded.
1273[ 66.142599] PMI: smblib_handle_wdog_bark: IRQ: wdog-bark
1274[ 66.142656] PMI: smblib_get_prop_usb_online: POWER_PATH_STATUS = 0x95
1275[ 66.142672] PMI: smblib_get_prop_dc_online: POWER_PATH_STATUS = 0x95
1276[ 66.142779] PMI: smblib_get_prop_usb_online: POWER_PATH_STATUS = 0x95
1277[ 66.142794] PMI: smblib_get_prop_dc_online: POWER_PATH_STATUS = 0x95
1278[ 66.142836] PMI: smblib_get_prop_batt_health: BATTERY_CHARGER_STATUS_2 = 0x80
1279[ 66.143159] lct QCOM-BATT: handle_main_charge_type: chip->charge_type =3, pval.intval=3
1280[ 66.143178] lct QCOM-BATT: handle_main_charge_type: chg_state enabling parallel
1281[ 66.143198] PMI: smblib_get_charge_param: input current limit status = 500000 (0x14)
1282[ 66.143213] lct QCOM-BATT: handle_settled_icl_change: main_limited=1, main_settled_ua=500000, chip->pl_settled_ua=0 ,total_current_ua=500000
1283[ 66.143219] lct QCOM-BATT: handle_settled_icl_change: total_current_ua <= 1300000 disable parallel charger smb1351
1284[ 66.143395] QCOM-STEPCHG: handle_jeita: VBATT = 290 FCC = 2500000uA FV = 4400000uV
1285[ 66.143502] PMI: smblib_get_prop_usb_online: POWER_PATH_STATUS = 0x95
1286[ 66.143516] PMI: smblib_get_prop_dc_online: POWER_PATH_STATUS = 0x95
1287[ 66.145033] PMI: smblib_get_prop_usb_online: POWER_PATH_STATUS = 0x95
1288[ 66.145050] PMI: smblib_get_prop_usb_online: POWER_PATH_STATUS = 0x95
1289[ 66.145066] PMI: smblib_get_prop_dc_online: POWER_PATH_STATUS = 0x95
1290[ 129.380757] PMI: smblib_handle_usb_source_change: APSD_STATUS = 0x11
1291[ 129.380764] PMI: smblib_handle_usb_source_change: chg->real_charger_type = 0x04
1292[ 129.380779] PMI: smblib_get_apsd_result: APSD_STATUS = 0x11
1293[ 129.380794] PMI: smblib_update_usb_type: lct battery charge APSD=SDP PD=0
1294[ 129.380806] PMI: smblib_handle_apsd_done: IRQ: apsd-done rising; SDP detected
1295[ 129.380820] PMI: smblib_get_apsd_result: APSD_STATUS = 0x11
1296[ 129.380835] PMI: smblib_handle_hvdcp_check_timeout: IRQ: smblib_handle_hvdcp_check_timeout falling
1297[ 129.380841] PMI: smblib_handle_sdp_enumeration_done: IRQ: sdp-enumeration-done rising
1298[ 129.380847] PMI: smblib_handle_slow_plugin_timeout: IRQ: slow-plugin-timeout falling
1299[ 129.534148] PMI: smblib_handle_usb_source_change: APSD_STATUS = 0x11
1300[ 129.534196] PMI: smblib_get_charge_param: float voltage = 4395000 (0x79)
1301[ 129.534214] PMI: smblib_get_charge_param: fast charge current = 2000000 (0x50)
1302[ 129.534234] PMI: smblib_get_charge_param: input current limit status = 500000 (0x14)
1303[ 129.534271] PMI: smblib_get_charge_param: usb input current limit = 500000 (0x14)
1304[ 129.534293] PMI: smblib_get_prop_usb_online: POWER_PATH_STATUS = 0x95
1305[ 129.534327] PMI: smblib_get_prop_usb_online: POWER_PATH_STATUS = 0x95
1306[ 129.534456] lct QCOM-BATT: handle_main_charge_type: chip->charge_type =3, pval.intval=3
1307[ 129.534462] lct QCOM-BATT: handle_main_charge_type: chg_state enabling parallel
1308[ 129.534477] PMI: smblib_get_charge_param: input current limit status = 500000 (0x14)
1309[ 129.534492] lct QCOM-BATT: handle_settled_icl_change: main_limited=1, main_settled_ua=500000, chip->pl_settled_ua=0 ,total_current_ua=500000
1310[ 129.534498] lct QCOM-BATT: handle_settled_icl_change: total_current_ua <= 1300000 disable parallel charger smb1351
1311[ 129.534514] PMI: smblib_get_prop_usb_online: POWER_PATH_STATUS = 0x95
1312[ 129.534528] PMI: smblib_get_prop_dc_online: POWER_PATH_STATUS = 0x95
1313[ 129.535825] PMI: smblib_get_prop_usb_online: POWER_PATH_STATUS = 0x95
1314[ 129.535842] PMI: smblib_get_prop_usb_online: POWER_PATH_STATUS = 0x95
1315[ 129.535857] PMI: smblib_get_prop_dc_online: POWER_PATH_STATUS = 0x95
1316[ 129.636576] PMI: smblib_get_charge_param: input current limit status = 500000 (0x14)
1317[ 129.636604] PMI: smblib_get_charge_param: input current limit status = 500000 (0x14)
1318[ 129.738887] PMI: smblib_get_apsd_result: APSD_STATUS = 0x11
1319[ 129.738919] PMI: smblib_get_charge_param: input current limit status = 500000 (0x14)
1320[ 132.016088] PMI: smblib_handle_wdog_bark: IRQ: wdog-bark
1321[ 132.016131] PMI: smblib_get_prop_usb_online: POWER_PATH_STATUS = 0x95
1322[ 132.016147] PMI: smblib_get_prop_dc_online: POWER_PATH_STATUS = 0x95
1323[ 132.016238] PMI: smblib_get_prop_usb_online: POWER_PATH_STATUS = 0x95
1324[ 132.016253] PMI: smblib_get_prop_dc_online: POWER_PATH_STATUS = 0x95
1325[ 132.016294] PMI: smblib_get_prop_batt_health: BATTERY_CHARGER_STATUS_2 = 0x80
1326[ 132.016607] lct QCOM-BATT: handle_main_charge_type: chip->charge_type =3, pval.intval=3
1327[ 132.016615] lct QCOM-BATT: handle_main_charge_type: chg_state enabling parallel
1328[ 132.016643] PMI: smblib_get_charge_param: input current limit status = 500000 (0x14)
1329[ 132.016658] lct QCOM-BATT: handle_settled_icl_change: main_limited=1, main_settled_ua=500000, chip->pl_settled_ua=0 ,total_current_ua=500000
1330[ 132.016664] lct QCOM-BATT: handle_settled_icl_change: total_current_ua <= 1300000 disable parallel charger smb1351
1331[ 132.016833] QCOM-STEPCHG: handle_jeita: VBATT = 290 FCC = 2500000uA FV = 4400000uV
1332[ 132.016936] PMI: smblib_get_prop_usb_online: POWER_PATH_STATUS = 0x95
1333[ 132.016951] PMI: smblib_get_prop_dc_online: POWER_PATH_STATUS = 0x95
1334[ 132.018457] PMI: smblib_get_prop_usb_online: POWER_PATH_STATUS = 0x95
1335[ 132.018473] PMI: smblib_get_prop_usb_online: POWER_PATH_STATUS = 0x95
1336[ 132.018487] PMI: smblib_get_prop_dc_online: POWER_PATH_STATUS = 0x95
1337[ 197.897747] PMI: smblib_handle_wdog_bark: IRQ: wdog-bark
1338[ 197.897795] PMI: smblib_get_prop_usb_online: POWER_PATH_STATUS = 0x95
1339[ 197.897810] PMI: smblib_get_prop_dc_online: POWER_PATH_STATUS = 0x95
1340[ 197.897906] PMI: smblib_get_prop_usb_online: POWER_PATH_STATUS = 0x95
1341[ 197.897920] PMI: smblib_get_prop_dc_online: POWER_PATH_STATUS = 0x95
1342[ 197.897961] PMI: smblib_get_prop_batt_health: BATTERY_CHARGER_STATUS_2 = 0x80
1343[ 197.898272] lct QCOM-BATT: handle_main_charge_type: chip->charge_type =3, pval.intval=3
1344[ 197.898279] lct QCOM-BATT: handle_main_charge_type: chg_state enabling parallel
1345[ 197.898306] PMI: smblib_get_charge_param: input current limit status = 500000 (0x14)
1346[ 197.898322] lct QCOM-BATT: handle_settled_icl_change: main_limited=1, main_settled_ua=500000, chip->pl_settled_ua=0 ,total_current_ua=500000
1347[ 197.898328] lct QCOM-BATT: handle_settled_icl_change: total_current_ua <= 1300000 disable parallel charger smb1351
1348[ 197.898495] QCOM-STEPCHG: handle_jeita: VBATT = 290 FCC = 2500000uA FV = 4400000uV
1349[ 197.898600] PMI: smblib_get_prop_usb_online: POWER_PATH_STATUS = 0x95
1350[ 197.898615] PMI: smblib_get_prop_dc_online: POWER_PATH_STATUS = 0x95
1351[ 197.900130] PMI: smblib_get_prop_usb_online: POWER_PATH_STATUS = 0x95
1352[ 197.900147] PMI: smblib_get_prop_usb_online: POWER_PATH_STATUS = 0x95
1353[ 197.900161] PMI: smblib_get_prop_dc_online: POWER_PATH_STATUS = 0x95
1354[ 263.788450] PMI: smblib_handle_wdog_bark: IRQ: wdog-bark
1355[ 263.788506] PMI: smblib_get_prop_usb_online: POWER_PATH_STATUS = 0x95
1356[ 263.788522] PMI: smblib_get_prop_dc_online: POWER_PATH_STATUS = 0x95
1357[ 263.788625] PMI: smblib_get_prop_usb_online: POWER_PATH_STATUS = 0x95
1358[ 263.788640] PMI: smblib_get_prop_dc_online: POWER_PATH_STATUS = 0x95
1359[ 263.788683] PMI: smblib_get_prop_batt_health: BATTERY_CHARGER_STATUS_2 = 0x80
1360[ 263.789005] lct QCOM-BATT: handle_main_charge_type: chip->charge_type =3, pval.intval=3
1361[ 263.789022] lct QCOM-BATT: handle_main_charge_type: chg_state enabling parallel
1362[ 263.789042] PMI: smblib_get_charge_param: input current limit status = 500000 (0x14)
1363[ 263.789058] lct QCOM-BATT: handle_settled_icl_change: main_limited=1, main_settled_ua=500000, chip->pl_settled_ua=0 ,total_current_ua=500000
1364[ 263.789064] lct QCOM-BATT: handle_settled_icl_change: total_current_ua <= 1300000 disable parallel charger smb1351
1365[ 263.789232] QCOM-STEPCHG: handle_jeita: VBATT = 290 FCC = 2500000uA FV = 4400000uV
1366[ 263.789339] PMI: smblib_get_prop_usb_online: POWER_PATH_STATUS = 0x95
1367[ 263.789354] PMI: smblib_get_prop_dc_online: POWER_PATH_STATUS = 0x95
1368[ 263.790915] PMI: smblib_get_prop_usb_online: POWER_PATH_STATUS = 0x95
1369[ 263.790932] PMI: smblib_get_prop_usb_online: POWER_PATH_STATUS = 0x95
1370[ 263.790947] PMI: smblib_get_prop_dc_online: POWER_PATH_STATUS = 0x95
1371[ 329.693536] PMI: smblib_handle_wdog_bark: IRQ: wdog-bark
1372[ 329.693586] PMI: smblib_get_prop_usb_online: POWER_PATH_STATUS = 0x95
1373[ 329.693600] PMI: smblib_get_prop_dc_online: POWER_PATH_STATUS = 0x95
1374[ 329.693697] PMI: smblib_get_prop_usb_online: POWER_PATH_STATUS = 0x95
1375[ 329.693712] PMI: smblib_get_prop_dc_online: POWER_PATH_STATUS = 0x95
1376[ 329.693755] PMI: smblib_get_prop_batt_health: BATTERY_CHARGER_STATUS_2 = 0x80
1377[ 329.694382] lct QCOM-BATT: handle_main_charge_type: chip->charge_type =3, pval.intval=3
1378[ 329.694388] lct QCOM-BATT: handle_main_charge_type: chg_state enabling parallel
1379[ 329.694407] PMI: smblib_get_charge_param: input current limit status = 500000 (0x14)
1380[ 329.694422] lct QCOM-BATT: handle_settled_icl_change: main_limited=1, main_settled_ua=500000, chip->pl_settled_ua=0 ,total_current_ua=500000
1381[ 329.694428] lct QCOM-BATT: handle_settled_icl_change: total_current_ua <= 1300000 disable parallel charger smb1351
1382[ 329.694456] QCOM-STEPCHG: handle_jeita: VBATT = 290 FCC = 2500000uA FV = 4400000uV
1383[ 329.694473] PMI: smblib_get_prop_usb_online: POWER_PATH_STATUS = 0x95
1384[ 329.694487] PMI: smblib_get_prop_dc_online: POWER_PATH_STATUS = 0x95
1385[ 329.696001] PMI: smblib_get_prop_usb_online: POWER_PATH_STATUS = 0x95
1386[ 329.696018] PMI: smblib_get_prop_usb_online: POWER_PATH_STATUS = 0x95
1387[ 329.696034] PMI: smblib_get_prop_dc_online: POWER_PATH_STATUS = 0x95
1388[ 381.575446] PMI: smblib_get_prop_batt_health: BATTERY_CHARGER_STATUS_2 = 0x80
1389[ 381.575795] PMI: smblib_get_prop_usb_online: POWER_PATH_STATUS = 0x95
1390[ 381.575811] PMI: smblib_get_prop_dc_online: POWER_PATH_STATUS = 0x95
1391[ 381.575902] PMI: smblib_get_prop_usb_online: POWER_PATH_STATUS = 0x95
1392[ 381.575916] PMI: smblib_get_prop_dc_online: POWER_PATH_STATUS = 0x95
1393[ 381.575958] PMI: smblib_get_prop_batt_health: BATTERY_CHARGER_STATUS_2 = 0x80
1394[ 381.576535] lct QCOM-BATT: handle_main_charge_type: chip->charge_type =3, pval.intval=3
1395[ 381.576541] lct QCOM-BATT: handle_main_charge_type: chg_state enabling parallel
1396[ 381.576557] PMI: smblib_get_charge_param: input current limit status = 500000 (0x14)
1397[ 381.576573] lct QCOM-BATT: handle_settled_icl_change: main_limited=1, main_settled_ua=500000, chip->pl_settled_ua=0 ,total_current_ua=500000
1398[ 381.576579] lct QCOM-BATT: handle_settled_icl_change: total_current_ua <= 1300000 disable parallel charger smb1351
1399[ 381.576600] QCOM-STEPCHG: handle_jeita: VBATT = 300 FCC = 2500000uA FV = 4400000uV
1400[ 381.576617] PMI: smblib_get_prop_usb_online: POWER_PATH_STATUS = 0x95
1401[ 381.576631] PMI: smblib_get_prop_dc_online: POWER_PATH_STATUS = 0x95
1402[ 381.577916] PMI: smblib_get_prop_usb_online: POWER_PATH_STATUS = 0x95
1403[ 381.577932] PMI: smblib_get_prop_usb_online: POWER_PATH_STATUS = 0x95
1404[ 381.577946] PMI: smblib_get_prop_dc_online: POWER_PATH_STATUS = 0x95
1405[ 383.053489] PMI: smblib_get_prop_batt_health: BATTERY_CHARGER_STATUS_2 = 0x80
1406/ #