· 6 years ago · Sep 27, 2019, 02:18 PM
1[ 0.000000] microcode: microcode updated early to revision 0x1f, date = 2018-05-08
2[ 0.000000] Linux version 5.2.14-1-default (geeko@buildhost) (gcc version 9.2.1 20190820 [gcc-9-branch revision 274748] (SUSE Linux)) #1 SMP Tue Sep 10 10:52:01 UTC 2019 (374b0ae)
3[ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-5.2.14-1-default root=UUID=1af3c54a-335f-4eaa-9fd2-a90251253f64 splash=silent quiet showopts radeon.si_support=0 radeon.cik_support=0 amdgpu.si_support=1 amdgpu.cik_support=1
4[ 0.000000] x86/fpu: x87 FPU will use FXSAVE
5[ 0.000000] BIOS-provided physical RAM map:
6[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009f7ff] usable
7[ 0.000000] BIOS-e820: [mem 0x000000000009f800-0x000000000009ffff] reserved
8[ 0.000000] BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved
9[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000cfedffff] usable
10[ 0.000000] BIOS-e820: [mem 0x00000000cfee0000-0x00000000cfee0fff] ACPI NVS
11[ 0.000000] BIOS-e820: [mem 0x00000000cfee1000-0x00000000cfeeffff] ACPI data
12[ 0.000000] BIOS-e820: [mem 0x00000000cfef0000-0x00000000cfefffff] reserved
13[ 0.000000] BIOS-e820: [mem 0x00000000f4000000-0x00000000f7ffffff] reserved
14[ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000ffffffff] reserved
15[ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000062fffffff] usable
16[ 0.000000] NX (Execute Disable) protection: active
17[ 0.000000] SMBIOS 2.4 present.
18[ 0.000000] DMI: Gigabyte Technology Co., Ltd. X58A-UD7/X58A-UD7, BIOS F7 08/24/2010
19[ 0.000000] tsc: Fast TSC calibration using PIT
20[ 0.000000] tsc: Detected 3197.893 MHz processor
21[ 0.002578] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
22[ 0.002580] e820: remove [mem 0x000a0000-0x000fffff] usable
23[ 0.002583] last_pfn = 0x630000 max_arch_pfn = 0x400000000
24[ 0.002586] MTRR default type: uncachable
25[ 0.002587] MTRR fixed ranges enabled:
26[ 0.002588] 00000-9FFFF write-back
27[ 0.002589] A0000-BFFFF uncachable
28[ 0.002589] C0000-CFFFF write-protect
29[ 0.002590] D0000-EFFFF uncachable
30[ 0.002591] F0000-FFFFF write-through
31[ 0.002591] MTRR variable ranges enabled:
32[ 0.002592] 0 base 000000000 mask F00000000 write-back
33[ 0.002593] 1 base 0E0000000 mask FE0000000 uncachable
34[ 0.002594] 2 base 0D0000000 mask FF0000000 uncachable
35[ 0.002594] 3 base 100000000 mask F00000000 write-back
36[ 0.002595] 4 base 200000000 mask E00000000 write-back
37[ 0.002596] 5 base 400000000 mask C00000000 write-back
38[ 0.002597] 6 base 500000000 mask F00000000 write-back
39[ 0.002597] 7 base 600000000 mask FC0000000 write-back
40[ 0.002598] 8 disabled
41[ 0.002598] 9 disabled
42[ 0.003525] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WP UC- WT
43[ 0.003617] e820: update [mem 0xd0000000-0xffffffff] usable ==> reserved
44[ 0.003621] last_pfn = 0xcfee0 max_arch_pfn = 0x400000000
45[ 0.008290] found SMP MP-table at [mem 0x000f5f70-0x000f5f7f]
46[ 0.020520] check: Scanning 1 areas for low memory corruption
47[ 0.020525] Using GB pages for direct mapping
48[ 0.020527] BRK [0x503001000, 0x503001fff] PGTABLE
49[ 0.020528] BRK [0x503002000, 0x503002fff] PGTABLE
50[ 0.020529] BRK [0x503003000, 0x503003fff] PGTABLE
51[ 0.020565] BRK [0x503004000, 0x503004fff] PGTABLE
52[ 0.020566] BRK [0x503005000, 0x503005fff] PGTABLE
53[ 0.020715] BRK [0x503006000, 0x503006fff] PGTABLE
54[ 0.020751] BRK [0x503007000, 0x503007fff] PGTABLE
55[ 0.020821] RAMDISK: [mem 0x357e1000-0x36be7fff]
56[ 0.020828] ACPI: Early table checksum verification disabled
57[ 0.024309] ACPI: RSDP 0x00000000000F7930 000014 (v00 GBT )
58[ 0.024311] ACPI: RSDT 0x00000000CFEE1040 000040 (v01 GBT GBTUACPI 42302E31 GBTU 01010101)
59[ 0.024316] ACPI: FACP 0x00000000CFEE10C0 000074 (v01 GBT GBTUACPI 42302E31 GBTU 01010101)
60[ 0.024320] ACPI: DSDT 0x00000000CFEE1180 00596A (v01 GBT GBTUACPI 00001000 MSFT 0100000C)
61[ 0.024323] ACPI: FACS 0x00000000CFEE0000 000040
62[ 0.024326] ACPI: HPET 0x00000000CFEE6CC0 000038 (v01 GBT GBTUACPI 42302E31 GBTU 00000098)
63[ 0.024328] ACPI: MCFG 0x00000000CFEE6D40 00003C (v01 GBT GBTUACPI 42302E31 GBTU 01010101)
64[ 0.024331] ACPI: EUDS 0x00000000CFEE6D80 0004D0 (v01 GBT 00000000 00000000)
65[ 0.024334] ACPI: TAMG 0x00000000CFEE7250 000C7A (v01 GBT GBT B0 5455312E BG?? 53450101)
66[ 0.024337] ACPI: APIC 0x00000000CFEE6B40 00012C (v01 GBT GBTUACPI 42302E31 GBTU 01010101)
67[ 0.024339] ACPI: SSDT 0x00000000CFEE7F00 004DDC (v01 INTEL PPM RCM 80000001 INTL 20061109)
68[ 0.024347] ACPI: Local APIC address 0xfee00000
69[ 0.024433] No NUMA configuration found
70[ 0.024434] Faking a node at [mem 0x0000000000000000-0x000000062fffffff]
71[ 0.024439] NODE_DATA(0) allocated [mem 0x62ffea000-0x62fffffff]
72[ 0.024486] Zone ranges:
73[ 0.024487] DMA [mem 0x0000000000001000-0x0000000000ffffff]
74[ 0.024488] DMA32 [mem 0x0000000001000000-0x00000000ffffffff]
75[ 0.024489] Normal [mem 0x0000000100000000-0x000000062fffffff]
76[ 0.024489] Device empty
77[ 0.024490] Movable zone start for each node
78[ 0.024491] Early memory node ranges
79[ 0.024492] node 0: [mem 0x0000000000001000-0x000000000009efff]
80[ 0.024493] node 0: [mem 0x0000000000100000-0x00000000cfedffff]
81[ 0.024493] node 0: [mem 0x0000000100000000-0x000000062fffffff]
82[ 0.024499] Zeroed struct page in unavailable ranges: 386 pages
83[ 0.024500] Initmem setup node 0 [mem 0x0000000000001000-0x000000062fffffff]
84[ 0.024502] On node 0 totalpages: 6291070
85[ 0.024502] DMA zone: 64 pages used for memmap
86[ 0.024503] DMA zone: 21 pages reserved
87[ 0.024504] DMA zone: 3998 pages, LIFO batch:0
88[ 0.024567] DMA32 zone: 13244 pages used for memmap
89[ 0.024567] DMA32 zone: 847584 pages, LIFO batch:63
90[ 0.038114] Normal zone: 84992 pages used for memmap
91[ 0.038115] Normal zone: 5439488 pages, LIFO batch:63
92[ 0.038821] ACPI: PM-Timer IO Port: 0x408
93[ 0.038823] ACPI: Local APIC address 0xfee00000
94[ 0.038830] ACPI: LAPIC_NMI (acpi_id[0x00] dfl dfl lint[0x1])
95[ 0.038831] ACPI: LAPIC_NMI (acpi_id[0x01] dfl dfl lint[0x1])
96[ 0.038831] ACPI: LAPIC_NMI (acpi_id[0x02] dfl dfl lint[0x1])
97[ 0.038832] ACPI: LAPIC_NMI (acpi_id[0x03] dfl dfl lint[0x1])
98[ 0.038832] ACPI: LAPIC_NMI (acpi_id[0x04] dfl dfl lint[0x1])
99[ 0.038833] ACPI: LAPIC_NMI (acpi_id[0x05] dfl dfl lint[0x1])
100[ 0.038833] ACPI: LAPIC_NMI (acpi_id[0x06] dfl dfl lint[0x1])
101[ 0.038834] ACPI: LAPIC_NMI (acpi_id[0x07] dfl dfl lint[0x1])
102[ 0.038834] ACPI: LAPIC_NMI (acpi_id[0x08] dfl dfl lint[0x1])
103[ 0.038835] ACPI: LAPIC_NMI (acpi_id[0x09] dfl dfl lint[0x1])
104[ 0.038836] ACPI: LAPIC_NMI (acpi_id[0x0a] dfl dfl lint[0x1])
105[ 0.038836] ACPI: LAPIC_NMI (acpi_id[0x0b] dfl dfl lint[0x1])
106[ 0.038837] ACPI: LAPIC_NMI (acpi_id[0x0c] dfl dfl lint[0x1])
107[ 0.038837] ACPI: LAPIC_NMI (acpi_id[0x0d] dfl dfl lint[0x1])
108[ 0.038838] ACPI: LAPIC_NMI (acpi_id[0x0e] dfl dfl lint[0x1])
109[ 0.038838] ACPI: LAPIC_NMI (acpi_id[0x0f] dfl dfl lint[0x1])
110[ 0.038848] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
111[ 0.038849] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
112[ 0.038851] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
113[ 0.038852] ACPI: IRQ0 used by override.
114[ 0.038853] ACPI: IRQ9 used by override.
115[ 0.038855] Using ACPI (MADT) for SMP configuration information
116[ 0.038856] ACPI: HPET id: 0x8086a201 base: 0xfed00000
117[ 0.038860] smpboot: Allowing 16 CPUs, 4 hotplug CPUs
118[ 0.038870] PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
119[ 0.038871] PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff]
120[ 0.038872] PM: Registered nosave memory: [mem 0x000a0000-0x000effff]
121[ 0.038872] PM: Registered nosave memory: [mem 0x000f0000-0x000fffff]
122[ 0.038873] PM: Registered nosave memory: [mem 0xcfee0000-0xcfee0fff]
123[ 0.038874] PM: Registered nosave memory: [mem 0xcfee1000-0xcfeeffff]
124[ 0.038874] PM: Registered nosave memory: [mem 0xcfef0000-0xcfefffff]
125[ 0.038874] PM: Registered nosave memory: [mem 0xcff00000-0xf3ffffff]
126[ 0.038875] PM: Registered nosave memory: [mem 0xf4000000-0xf7ffffff]
127[ 0.038875] PM: Registered nosave memory: [mem 0xf8000000-0xfebfffff]
128[ 0.038876] PM: Registered nosave memory: [mem 0xfec00000-0xffffffff]
129[ 0.038877] [mem 0xcff00000-0xf3ffffff] available for PCI devices
130[ 0.038878] Booting paravirtualized kernel on bare hardware
131[ 0.038880] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns
132[ 0.199097] setup_percpu: NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:16 nr_node_ids:1
133[ 0.199606] percpu: Embedded 57 pages/cpu s196608 r8192 d28672 u262144
134[ 0.199612] pcpu-alloc: s196608 r8192 d28672 u262144 alloc=1*2097152
135[ 0.199612] pcpu-alloc: [0] 00 01 02 03 04 05 06 07 [0] 08 09 10 11 12 13 14 15
136[ 0.199629] Built 1 zonelists, mobility grouping on. Total pages: 6192749
137[ 0.199630] Policy zone: Normal
138[ 0.199631] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-5.2.14-1-default root=UUID=1af3c54a-335f-4eaa-9fd2-a90251253f64 splash=silent quiet showopts radeon.si_support=0 radeon.cik_support=0 amdgpu.si_support=1 amdgpu.cik_support=1
139[ 0.199772] printk: log_buf_len individual max cpu contribution: 32768 bytes
140[ 0.199773] printk: log_buf_len total cpu_extra contributions: 491520 bytes
141[ 0.199773] printk: log_buf_len min size: 262144 bytes
142[ 0.199878] printk: log_buf_len: 1048576 bytes
143[ 0.199879] printk: early log buf free: 252348(96%)
144[ 0.222402] Memory: 3451272K/25164280K available (12291K kernel code, 1470K rwdata, 3992K rodata, 2108K init, 13060K bss, 523668K reserved, 0K cma-reserved)
145[ 0.222408] random: get_random_u64 called from kmem_cache_open+0x2e/0x3f0 with crng_init=0
146[ 0.222531] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=16, Nodes=1
147[ 0.222542] Kernel/User page tables isolation: enabled
148[ 0.222559] ftrace: allocating 37988 entries in 149 pages
149[ 0.235131] rcu: Hierarchical RCU implementation.
150[ 0.235132] rcu: RCU event tracing is enabled.
151[ 0.235133] rcu: RCU restricting CPUs from NR_CPUS=512 to nr_cpu_ids=16.
152[ 0.235133] Tasks RCU enabled.
153[ 0.235134] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies.
154[ 0.235134] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=16
155[ 0.238455] NR_IRQS: 33024, nr_irqs: 552, preallocated irqs: 16
156[ 0.238785] Console: colour dummy device 80x25
157[ 0.238789] printk: console [tty0] enabled
158[ 0.238804] ACPI: Core revision 20190509
159[ 0.238938] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484882848 ns
160[ 0.238946] hpet clockevent registered
161[ 0.238949] APIC: Switch to symmetric I/O mode setup
162[ 0.238950] DMAR-IR: This system BIOS has enabled interrupt remapping
163 on a chipset that contains an erratum making that
164 feature unstable. To maintain system stability
165 interrupt remapping is being disabled. Please
166 contact your BIOS vendor for an update
167[ 0.238951] Switched APIC routing to physical flat.
168[ 0.239416] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
169[ 0.258948] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x2e188400562, max_idle_ns: 440795327998 ns
170[ 0.258951] Calibrating delay loop (skipped), value calculated using timer frequency.. 6395.78 BogoMIPS (lpj=12791572)
171[ 0.258952] pid_max: default: 32768 minimum: 301
172[ 0.258986] LSM: Security Framework initializing
173[ 0.259011] AppArmor: AppArmor initialized
174[ 0.263538] Dentry cache hash table entries: 4194304 (order: 13, 33554432 bytes)
175[ 0.265899] Inode-cache hash table entries: 2097152 (order: 12, 16777216 bytes)
176[ 0.265993] Mount-cache hash table entries: 65536 (order: 7, 524288 bytes)
177[ 0.266074] Mountpoint-cache hash table entries: 65536 (order: 7, 524288 bytes)
178[ 0.266302] mce: CPU0: Thermal monitoring enabled (TM1)
179[ 0.266309] process: using mwait in idle threads
180[ 0.266311] Last level iTLB entries: 4KB 512, 2MB 7, 4MB 7
181[ 0.266312] Last level dTLB entries: 4KB 512, 2MB 32, 4MB 32, 1GB 0
182[ 0.266312] Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization
183[ 0.266314] Spectre V2 : Mitigation: Full generic retpoline
184[ 0.266314] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch
185[ 0.266315] Spectre V2 : Enabling Restricted Speculation for firmware calls
186[ 0.266317] Spectre V2 : mitigation: Enabling conditional Indirect Branch Prediction Barrier
187[ 0.266317] Spectre V2 : User space: Mitigation: STIBP via seccomp and prctl
188[ 0.266318] Speculative Store Bypass: Mitigation: Speculative Store Bypass disabled via prctl and seccomp
189[ 0.266320] MDS: Vulnerable: Clear CPU buffers attempted, no microcode
190[ 0.266437] Freeing SMP alternatives memory: 36K
191[ 0.381306] smpboot: CPU0: Intel(R) Xeon(R) CPU W3670 @ 3.20GHz (family: 0x6, model: 0x2c, stepping: 0x2)
192[ 0.381399] Performance Events: PEBS fmt1+, Westmere events, 16-deep LBR, Intel PMU driver.
193[ 0.381405] core: CPUID marked event: 'bus cycles' unavailable
194[ 0.381406] ... version: 3
195[ 0.381406] ... bit width: 48
196[ 0.381407] ... generic registers: 4
197[ 0.381407] ... value mask: 0000ffffffffffff
198[ 0.381408] ... max period: 000000007fffffff
199[ 0.381408] ... fixed-purpose events: 3
200[ 0.381409] ... event mask: 000000070000000f
201[ 0.381444] rcu: Hierarchical SRCU implementation.
202[ 0.382429] NMI watchdog: Enabled. Permanently consumes one hw-PMU counter.
203[ 0.382534] smp: Bringing up secondary CPUs ...
204[ 0.382610] x86: Booting SMP configuration:
205[ 0.382611] .... node #0, CPUs: #1 #2 #3 #4 #5 #6
206[ 0.397498] MDS CPU bug present and SMT on, data leak possible. See https://www.kernel.org/doc/html/latest/admin-guide/hw-vuln/mds.html for more details.
207[ 0.397498] #7 #8 #9 #10 #11
208[ 0.410995] smp: Brought up 1 node, 12 CPUs
209[ 0.410995] smpboot: Max logical packages: 2
210[ 0.410995] smpboot: Total of 12 processors activated (76749.43 BogoMIPS)
211[ 0.486959] node 0 initialised, 5297335 pages in 72ms
212[ 0.487575] devtmpfs: initialized
213[ 0.490994] x86/mm: Memory block size: 128MB
214[ 0.492654] PM: Registering ACPI NVS region [mem 0xcfee0000-0xcfee0fff] (4096 bytes)
215[ 0.492654] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
216[ 0.492654] futex hash table entries: 4096 (order: 6, 262144 bytes)
217[ 0.492654] pinctrl core: initialized pinctrl subsystem
218[ 0.492654] PM: RTC time: 13:20:48, date: 2019-09-27
219[ 0.492654] NET: Registered protocol family 16
220[ 0.492654] audit: initializing netlink subsys (disabled)
221[ 0.492654] audit: type=2000 audit(1569590448.252:1): state=initialized audit_enabled=0 res=1
222[ 0.492654] cpuidle: using governor ladder
223[ 0.492654] cpuidle: using governor menu
224[ 0.492654] ACPI: bus type PCI registered
225[ 0.492654] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
226[ 0.492654] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf4000000-0xf7ffffff] (base 0xf4000000)
227[ 0.492654] PCI: MMCONFIG at [mem 0xf4000000-0xf7ffffff] reserved in E820
228[ 0.492654] pmd_set_huge: Cannot satisfy [mem 0xf4000000-0xf4200000] with a huge-page mapping due to MTRR override.
229[ 0.492654] PCI: Using configuration type 1 for base access
230[ 0.494983] HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages
231[ 0.494983] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
232[ 0.495005] ACPI: Added _OSI(Module Device)
233[ 0.495005] ACPI: Added _OSI(Processor Device)
234[ 0.495006] ACPI: Added _OSI(3.0 _SCP Extensions)
235[ 0.495007] ACPI: Added _OSI(Processor Aggregator Device)
236[ 0.495007] ACPI: Added _OSI(Linux-Dell-Video)
237[ 0.495008] ACPI: Added _OSI(Linux-Lenovo-NV-HDMI-Audio)
238[ 0.495009] ACPI: Added _OSI(Linux-HPI-Hybrid-Graphics)
239[ 0.502634] ACPI: 2 ACPI AML tables successfully acquired and loaded
240[ 0.507676] ACPI: Interpreter enabled
241[ 0.507691] ACPI: (supports S0 S3 S4 S5)
242[ 0.507692] ACPI: Using IOAPIC for interrupt routing
243[ 0.507711] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
244[ 0.507892] ACPI: Enabled 9 GPEs in block 00 to 3F
245[ 0.512923] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3f])
246[ 0.512927] acpi PNP0A03:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI HPX-Type3]
247[ 0.513155] PCI host bridge to bus 0000:00
248[ 0.513157] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window]
249[ 0.513158] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window]
250[ 0.513159] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
251[ 0.513160] pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000dffff window]
252[ 0.513161] pci_bus 0000:00: root bus resource [mem 0xcff00000-0xfebfffff window]
253[ 0.513162] pci_bus 0000:00: root bus resource [bus 00-3f]
254[ 0.513171] pci 0000:00:00.0: [8086:3405] type 00 class 0x060000
255[ 0.513198] pci 0000:00:00.0: enabling Extended Tags
256[ 0.513229] pci 0000:00:00.0: PME# supported from D0 D3hot D3cold
257[ 0.513315] pci 0000:00:01.0: [8086:3408] type 01 class 0x060400
258[ 0.513344] pci 0000:00:01.0: enabling Extended Tags
259[ 0.513378] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
260[ 0.513460] pci 0000:00:02.0: [8086:3409] type 01 class 0x060400
261[ 0.513487] pci 0000:00:02.0: enabling Extended Tags
262[ 0.513519] pci 0000:00:02.0: PME# supported from D0 D3hot D3cold
263[ 0.513601] pci 0000:00:03.0: [8086:340a] type 01 class 0x060400
264[ 0.513629] pci 0000:00:03.0: enabling Extended Tags
265[ 0.513663] pci 0000:00:03.0: PME# supported from D0 D3hot D3cold
266[ 0.513751] pci 0000:00:10.0: [8086:3425] type 00 class 0x080000
267[ 0.513850] pci 0000:00:10.1: [8086:3426] type 00 class 0x080000
268[ 0.513942] pci 0000:00:11.0: [8086:3427] type 00 class 0x080000
269[ 0.514038] pci 0000:00:11.1: [8086:3428] type 00 class 0x080000
270[ 0.514131] pci 0000:00:13.0: [8086:342d] type 00 class 0x080020
271[ 0.514141] pci 0000:00:13.0: reg 0x10: [mem 0xfbfff000-0xfbffffff]
272[ 0.514181] pci 0000:00:13.0: PME# supported from D0 D3hot D3cold
273[ 0.514249] pci 0000:00:14.0: [8086:342e] type 00 class 0x080000
274[ 0.514357] pci 0000:00:14.1: [8086:3422] type 00 class 0x080000
275[ 0.514465] pci 0000:00:14.2: [8086:3423] type 00 class 0x080000
276[ 0.514573] pci 0000:00:15.0: [8086:342f] type 00 class 0x080020
277[ 0.514669] pci 0000:00:1a.0: [8086:3a37] type 00 class 0x0c0300
278[ 0.514708] pci 0000:00:1a.0: reg 0x20: [io 0xff00-0xff1f]
279[ 0.514815] pci 0000:00:1a.1: [8086:3a38] type 00 class 0x0c0300
280[ 0.514854] pci 0000:00:1a.1: reg 0x20: [io 0xfe00-0xfe1f]
281[ 0.514961] pci 0000:00:1a.2: [8086:3a39] type 00 class 0x0c0300
282[ 0.514999] pci 0000:00:1a.2: reg 0x20: [io 0xfd00-0xfd1f]
283[ 0.515111] pci 0000:00:1a.7: [8086:3a3c] type 00 class 0x0c0320
284[ 0.515130] pci 0000:00:1a.7: reg 0x10: [mem 0xfbffe000-0xfbffe3ff]
285[ 0.515203] pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold
286[ 0.515285] pci 0000:00:1b.0: [8086:3a3e] type 00 class 0x040300
287[ 0.515303] pci 0000:00:1b.0: reg 0x10: [mem 0xfbff4000-0xfbff7fff 64bit]
288[ 0.515368] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
289[ 0.515448] pci 0000:00:1c.0: [8086:3a40] type 01 class 0x060400
290[ 0.515520] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
291[ 0.515608] pci 0000:00:1c.1: [8086:3a42] type 01 class 0x060400
292[ 0.515684] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
293[ 0.515772] pci 0000:00:1c.4: [8086:3a48] type 01 class 0x060400
294[ 0.515848] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
295[ 0.515933] pci 0000:00:1c.5: [8086:3a4a] type 01 class 0x060400
296[ 0.516009] pci 0000:00:1c.5: PME# supported from D0 D3hot D3cold
297[ 0.516095] pci 0000:00:1d.0: [8086:3a34] type 00 class 0x0c0300
298[ 0.516134] pci 0000:00:1d.0: reg 0x20: [io 0xfc00-0xfc1f]
299[ 0.516239] pci 0000:00:1d.1: [8086:3a35] type 00 class 0x0c0300
300[ 0.516277] pci 0000:00:1d.1: reg 0x20: [io 0xfb00-0xfb1f]
301[ 0.516385] pci 0000:00:1d.2: [8086:3a36] type 00 class 0x0c0300
302[ 0.516423] pci 0000:00:1d.2: reg 0x20: [io 0xfa00-0xfa1f]
303[ 0.516532] pci 0000:00:1d.7: [8086:3a3a] type 00 class 0x0c0320
304[ 0.516551] pci 0000:00:1d.7: reg 0x10: [mem 0xfbffd000-0xfbffd3ff]
305[ 0.516625] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
306[ 0.516703] pci 0000:00:1e.0: [8086:244e] type 01 class 0x060401
307[ 0.516827] pci 0000:00:1f.0: [8086:3a16] type 00 class 0x060100
308[ 0.516901] pci 0000:00:1f.0: quirk: [io 0x0400-0x047f] claimed by ICH6 ACPI/GPIO/TCO
309[ 0.516904] pci 0000:00:1f.0: quirk: [io 0x0480-0x04bf] claimed by ICH6 GPIO
310[ 0.516906] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 1 PIO at 0800 (mask 000f)
311[ 0.516909] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 2 PIO at 0290 (mask 000f)
312[ 0.517006] pci 0000:00:1f.2: [8086:3a22] type 00 class 0x010601
313[ 0.517022] pci 0000:00:1f.2: reg 0x10: [io 0xf900-0xf907]
314[ 0.517028] pci 0000:00:1f.2: reg 0x14: [io 0xf800-0xf803]
315[ 0.517033] pci 0000:00:1f.2: reg 0x18: [io 0xf700-0xf707]
316[ 0.517039] pci 0000:00:1f.2: reg 0x1c: [io 0xf600-0xf603]
317[ 0.517045] pci 0000:00:1f.2: reg 0x20: [io 0xf500-0xf51f]
318[ 0.517051] pci 0000:00:1f.2: reg 0x24: [mem 0xfbffc000-0xfbffc7ff]
319[ 0.517087] pci 0000:00:1f.2: PME# supported from D3hot
320[ 0.517162] pci 0000:00:1f.3: [8086:3a30] type 00 class 0x0c0500
321[ 0.517178] pci 0000:00:1f.3: reg 0x10: [mem 0xfbffb000-0xfbffb0ff 64bit]
322[ 0.517194] pci 0000:00:1f.3: reg 0x20: [io 0x0500-0x051f]
323[ 0.517310] pci 0000:01:00.0: [1b4b:9128] type 00 class 0x010601
324[ 0.517323] pci 0000:01:00.0: reg 0x10: [io 0xcf00-0xcf07]
325[ 0.517329] pci 0000:01:00.0: reg 0x14: [io 0xce00-0xce03]
326[ 0.517334] pci 0000:01:00.0: reg 0x18: [io 0xcd00-0xcd07]
327[ 0.517340] pci 0000:01:00.0: reg 0x1c: [io 0xcc00-0xcc03]
328[ 0.517346] pci 0000:01:00.0: reg 0x20: [io 0xcb00-0xcb0f]
329[ 0.517352] pci 0000:01:00.0: reg 0x24: [mem 0xfb9ff000-0xfb9ff7ff]
330[ 0.517358] pci 0000:01:00.0: reg 0x30: [mem 0x00000000-0x0000ffff pref]
331[ 0.517367] pci 0000:01:00.0: Enabling fixed DMA alias to 00.1
332[ 0.517392] pci 0000:01:00.0: PME# supported from D3hot
333[ 0.526970] pci 0000:00:01.0: PCI bridge to [bus 01]
334[ 0.526974] pci 0000:00:01.0: bridge window [io 0xc000-0xcfff]
335[ 0.526978] pci 0000:00:01.0: bridge window [mem 0xfb900000-0xfb9fffff]
336[ 0.527045] pci 0000:02:00.0: [1033:0194] type 00 class 0x0c0330
337[ 0.527066] pci 0000:02:00.0: reg 0x10: [mem 0xfb7fe000-0xfb7fffff 64bit]
338[ 0.527151] pci 0000:02:00.0: PME# supported from D0 D3hot D3cold
339[ 0.538970] pci 0000:00:02.0: PCI bridge to [bus 02]
340[ 0.538976] pci 0000:00:02.0: bridge window [mem 0xfb700000-0xfb7fffff]
341[ 0.539041] pci 0000:03:00.0: [1002:67b1] type 00 class 0x030000
342[ 0.539065] pci 0000:03:00.0: reg 0x10: [mem 0xd0000000-0xdfffffff 64bit pref]
343[ 0.539075] pci 0000:03:00.0: reg 0x18: [mem 0xef800000-0xefffffff 64bit pref]
344[ 0.539082] pci 0000:03:00.0: reg 0x20: [io 0xde00-0xdeff]
345[ 0.539088] pci 0000:03:00.0: reg 0x24: [mem 0xfb680000-0xfb6bffff]
346[ 0.539095] pci 0000:03:00.0: reg 0x30: [mem 0x00000000-0x0001ffff pref]
347[ 0.539100] pci 0000:03:00.0: enabling Extended Tags
348[ 0.539157] pci 0000:03:00.0: supports D1 D2
349[ 0.539158] pci 0000:03:00.0: PME# supported from D1 D2 D3hot
350[ 0.539194] pci 0000:03:00.0: 64.000 Gb/s available PCIe bandwidth, limited by 5 GT/s x16 link at 0000:00:03.0 (capable of 126.016 Gb/s with 8 GT/s x16 link)
351[ 0.539233] pci 0000:03:00.1: [1002:aac8] type 00 class 0x040300
352[ 0.539253] pci 0000:03:00.1: reg 0x10: [mem 0xfb6fc000-0xfb6fffff 64bit]
353[ 0.539286] pci 0000:03:00.1: enabling Extended Tags
354[ 0.539329] pci 0000:03:00.1: supports D1 D2
355[ 0.550974] pci 0000:00:03.0: PCI bridge to [bus 03]
356[ 0.550978] pci 0000:00:03.0: bridge window [io 0xd000-0xdfff]
357[ 0.550981] pci 0000:00:03.0: bridge window [mem 0xfb600000-0xfb6fffff]
358[ 0.550986] pci 0000:00:03.0: bridge window [mem 0xd0000000-0xefffffff 64bit pref]
359[ 0.551041] pci 0000:00:1c.0: PCI bridge to [bus 04]
360[ 0.551113] pci 0000:05:00.0: [197b:2363] type 00 class 0x010601
361[ 0.551204] pci 0000:05:00.0: reg 0x24: [mem 0xfbefe000-0xfbefffff]
362[ 0.551273] pci 0000:05:00.0: PME# supported from D3hot
363[ 0.551347] pci 0000:05:00.1: [197b:2363] type 00 class 0x010185
364[ 0.551373] pci 0000:05:00.1: reg 0x10: [io 0xbf00-0xbf07]
365[ 0.551385] pci 0000:05:00.1: reg 0x14: [io 0xbe00-0xbe03]
366[ 0.551397] pci 0000:05:00.1: reg 0x18: [io 0xbd00-0xbd07]
367[ 0.551409] pci 0000:05:00.1: reg 0x1c: [io 0xbc00-0xbc03]
368[ 0.551420] pci 0000:05:00.1: reg 0x20: [io 0xbb00-0xbb0f]
369[ 0.551530] pci 0000:05:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force'
370[ 0.551538] pci 0000:00:1c.1: PCI bridge to [bus 05]
371[ 0.551541] pci 0000:00:1c.1: bridge window [io 0xb000-0xbfff]
372[ 0.551543] pci 0000:00:1c.1: bridge window [mem 0xfbe00000-0xfbefffff]
373[ 0.551591] pci 0000:06:00.0: [10ec:8168] type 00 class 0x020000
374[ 0.551617] pci 0000:06:00.0: reg 0x10: [io 0xae00-0xaeff]
375[ 0.551642] pci 0000:06:00.0: reg 0x18: [mem 0xfbcff000-0xfbcfffff 64bit pref]
376[ 0.551657] pci 0000:06:00.0: reg 0x20: [mem 0xfbcf8000-0xfbcfbfff 64bit pref]
377[ 0.551667] pci 0000:06:00.0: reg 0x30: [mem 0x00000000-0x0001ffff pref]
378[ 0.551750] pci 0000:06:00.0: supports D1 D2
379[ 0.551751] pci 0000:06:00.0: PME# supported from D0 D1 D2 D3hot D3cold
380[ 0.551837] pci 0000:00:1c.4: ASPM: current common clock configuration is broken, reconfiguring
381[ 0.562975] pci 0000:00:1c.4: PCI bridge to [bus 06]
382[ 0.562979] pci 0000:00:1c.4: bridge window [io 0xa000-0xafff]
383[ 0.562983] pci 0000:00:1c.4: bridge window [mem 0xfbd00000-0xfbdfffff]
384[ 0.562988] pci 0000:00:1c.4: bridge window [mem 0xfbc00000-0xfbcfffff 64bit pref]
385[ 0.563059] pci 0000:07:00.0: [10ec:8168] type 00 class 0x020000
386[ 0.563085] pci 0000:07:00.0: reg 0x10: [io 0xee00-0xeeff]
387[ 0.563110] pci 0000:07:00.0: reg 0x18: [mem 0xfbaff000-0xfbafffff 64bit pref]
388[ 0.563125] pci 0000:07:00.0: reg 0x20: [mem 0xfbaf8000-0xfbafbfff 64bit pref]
389[ 0.563135] pci 0000:07:00.0: reg 0x30: [mem 0x00000000-0x0001ffff pref]
390[ 0.563218] pci 0000:07:00.0: supports D1 D2
391[ 0.563219] pci 0000:07:00.0: PME# supported from D0 D1 D2 D3hot D3cold
392[ 0.563304] pci 0000:00:1c.5: ASPM: current common clock configuration is broken, reconfiguring
393[ 0.574974] pci 0000:00:1c.5: PCI bridge to [bus 07]
394[ 0.574979] pci 0000:00:1c.5: bridge window [io 0xe000-0xefff]
395[ 0.574983] pci 0000:00:1c.5: bridge window [mem 0xfbb00000-0xfbbfffff]
396[ 0.574988] pci 0000:00:1c.5: bridge window [mem 0xfba00000-0xfbafffff 64bit pref]
397[ 0.575008] pci_bus 0000:08: extended config space not accessible
398[ 0.575050] pci 0000:08:06.0: [104c:8024] type 00 class 0x0c0010
399[ 0.575065] pci 0000:08:06.0: reg 0x10: [mem 0xfb8ff000-0xfb8ff7ff]
400[ 0.575073] pci 0000:08:06.0: reg 0x14: [mem 0xfb8f8000-0xfb8fbfff]
401[ 0.575137] pci 0000:08:06.0: supports D1 D2
402[ 0.575138] pci 0000:08:06.0: PME# supported from D0 D1 D2 D3hot
403[ 0.575197] pci 0000:00:1e.0: PCI bridge to [bus 08] (subtractive decode)
404[ 0.575201] pci 0000:00:1e.0: bridge window [mem 0xfb800000-0xfb8fffff]
405[ 0.575206] pci 0000:00:1e.0: bridge window [io 0x0000-0x0cf7 window] (subtractive decode)
406[ 0.575207] pci 0000:00:1e.0: bridge window [io 0x0d00-0xffff window] (subtractive decode)
407[ 0.575208] pci 0000:00:1e.0: bridge window [mem 0x000a0000-0x000bffff window] (subtractive decode)
408[ 0.575209] pci 0000:00:1e.0: bridge window [mem 0x000c0000-0x000dffff window] (subtractive decode)
409[ 0.575210] pci 0000:00:1e.0: bridge window [mem 0xcff00000-0xfebfffff window] (subtractive decode)
410[ 0.575701] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 10 *11 12 14 15)
411[ 0.575764] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 9 10 11 12 *14 15)
412[ 0.575827] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 9 *10 11 12 14 15)
413[ 0.575889] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 *5 6 7 9 10 11 12 14 15)
414[ 0.575951] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
415[ 0.576013] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 *4 5 6 7 9 10 11 12 14 15)
416[ 0.576075] ACPI: PCI Interrupt Link [LNK0] (IRQs 3 4 5 6 *7 9 10 11 12 14 15)
417[ 0.576138] ACPI: PCI Interrupt Link [LNK1] (IRQs *3 4 5 6 7 9 10 11 12 14 15)
418[ 0.576276] pci 0000:03:00.0: vgaarb: setting as boot VGA device
419[ 0.576276] pci 0000:03:00.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
420[ 0.576276] pci 0000:03:00.0: vgaarb: bridge control possible
421[ 0.576276] vgaarb: loaded
422[ 0.576276] SCSI subsystem initialized
423[ 0.576276] libata version 3.00 loaded.
424[ 0.576276] EDAC MC: Ver: 3.0.0
425[ 0.576276] PCI: Using ACPI for IRQ routing
426[ 0.576276] PCI: Discovered peer bus 3f
427[ 0.576276] PCI: root bus 3f: using default resources
428[ 0.576276] PCI: Probing PCI hardware (bus 3f)
429[ 0.576276] PCI host bridge to bus 0000:3f
430[ 0.576276] pci_bus 0000:3f: root bus resource [io 0x0000-0xffff]
431[ 0.576276] pci_bus 0000:3f: root bus resource [mem 0x00000000-0xfffffffff]
432[ 0.576276] pci_bus 0000:3f: No busn resource found for root bus, will use [bus 3f-ff]
433[ 0.576276] pci_bus 0000:3f: busn_res: can not insert [bus 3f-ff] under domain [bus 00-ff] (conflicts with (null) [bus 00-3f])
434[ 0.576276] pci 0000:3f:00.0: [8086:2c70] type 00 class 0x060000
435[ 0.576276] pci 0000:3f:00.1: [8086:2d81] type 00 class 0x060000
436[ 0.576276] pci 0000:3f:02.0: [8086:2d90] type 00 class 0x060000
437[ 0.576276] pci 0000:3f:02.1: [8086:2d91] type 00 class 0x060000
438[ 0.576278] pci 0000:3f:02.2: [8086:2d92] type 00 class 0x060000
439[ 0.576310] pci 0000:3f:02.3: [8086:2d93] type 00 class 0x060000
440[ 0.576340] pci 0000:3f:03.0: [8086:2d98] type 00 class 0x060000
441[ 0.576370] pci 0000:3f:03.1: [8086:2d99] type 00 class 0x060000
442[ 0.576401] pci 0000:3f:03.4: [8086:2d9c] type 00 class 0x060000
443[ 0.576433] pci 0000:3f:04.0: [8086:2da0] type 00 class 0x060000
444[ 0.576464] pci 0000:3f:04.1: [8086:2da1] type 00 class 0x060000
445[ 0.576494] pci 0000:3f:04.2: [8086:2da2] type 00 class 0x060000
446[ 0.576525] pci 0000:3f:04.3: [8086:2da3] type 00 class 0x060000
447[ 0.576557] pci 0000:3f:05.0: [8086:2da8] type 00 class 0x060000
448[ 0.576589] pci 0000:3f:05.1: [8086:2da9] type 00 class 0x060000
449[ 0.576619] pci 0000:3f:05.2: [8086:2daa] type 00 class 0x060000
450[ 0.576649] pci 0000:3f:05.3: [8086:2dab] type 00 class 0x060000
451[ 0.576681] pci 0000:3f:06.0: [8086:2db0] type 00 class 0x060000
452[ 0.576711] pci 0000:3f:06.1: [8086:2db1] type 00 class 0x060000
453[ 0.576741] pci 0000:3f:06.2: [8086:2db2] type 00 class 0x060000
454[ 0.576772] pci 0000:3f:06.3: [8086:2db3] type 00 class 0x060000
455[ 0.576811] pci_bus 0000:3f: busn_res: [bus 3f-ff] end is updated to 3f
456[ 0.576813] pci_bus 0000:3f: busn_res: can not insert [bus 3f] under domain [bus 00-ff] (conflicts with (null) [bus 00-3f])
457[ 0.576818] PCI: pci_cache_line_size set to 64 bytes
458[ 0.576902] e820: reserve RAM buffer [mem 0x0009f800-0x0009ffff]
459[ 0.576902] e820: reserve RAM buffer [mem 0xcfee0000-0xcfffffff]
460[ 0.576983] NetLabel: Initializing
461[ 0.576983] NetLabel: domain hash size = 128
462[ 0.576984] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO
463[ 0.576995] NetLabel: unlabeled traffic allowed by default
464[ 0.576999] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0
465[ 0.576999] hpet0: 4 comparators, 64-bit 14.318180 MHz counter
466[ 0.579977] clocksource: Switched to clocksource tsc-early
467[ 0.589381] VFS: Disk quotas dquot_6.6.0
468[ 0.589399] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
469[ 0.589487] AppArmor: AppArmor Filesystem Enabled
470[ 0.589499] pnp: PnP ACPI init
471[ 0.589697] system 00:00: [io 0x04d0-0x04d1] has been reserved
472[ 0.589698] system 00:00: [io 0x0290-0x029f] has been reserved
473[ 0.589699] system 00:00: [io 0x0800-0x087f] has been reserved
474[ 0.589700] system 00:00: [io 0x0290-0x0294] has been reserved
475[ 0.589701] system 00:00: [io 0x0880-0x088f] has been reserved
476[ 0.589705] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
477[ 0.589776] pnp 00:01: Plug and Play ACPI device, IDs PNP0b00 (active)
478[ 0.589953] system 00:02: [io 0x0400-0x04cf] could not be reserved
479[ 0.589954] system 00:02: [io 0x04d2-0x04ff] has been reserved
480[ 0.589958] system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active)
481[ 0.590186] system 00:03: [mem 0xf4000000-0xf7ffffff] has been reserved
482[ 0.590189] system 00:03: Plug and Play ACPI device, IDs PNP0c02 (active)
483[ 0.590427] system 00:04: [mem 0x000d3000-0x000d3fff] has been reserved
484[ 0.590429] system 00:04: [mem 0x000f0000-0x000f7fff] could not be reserved
485[ 0.590430] system 00:04: [mem 0x000f8000-0x000fbfff] could not be reserved
486[ 0.590431] system 00:04: [mem 0x000fc000-0x000fffff] could not be reserved
487[ 0.590432] system 00:04: [mem 0xcfee0000-0xcfeeffff] could not be reserved
488[ 0.590433] system 00:04: [mem 0x00000000-0x0009ffff] could not be reserved
489[ 0.590434] system 00:04: [mem 0x00100000-0xcfedffff] could not be reserved
490[ 0.590435] system 00:04: [mem 0xcfef0000-0xcfefffff] has been reserved
491[ 0.590437] system 00:04: [mem 0xfec00000-0xfec00fff] could not be reserved
492[ 0.590438] system 00:04: [mem 0xfed10000-0xfed1dfff] has been reserved
493[ 0.590439] system 00:04: [mem 0xfed20000-0xfed8ffff] has been reserved
494[ 0.590440] system 00:04: [mem 0xfee00000-0xfee00fff] has been reserved
495[ 0.590443] system 00:04: [mem 0xffb00000-0xffb7ffff] has been reserved
496[ 0.590444] system 00:04: [mem 0xfff00000-0xffffffff] has been reserved
497[ 0.590445] system 00:04: [mem 0x000e0000-0x000effff] has been reserved
498[ 0.590448] system 00:04: Plug and Play ACPI device, IDs PNP0c01 (active)
499[ 0.590454] pnp: PnP ACPI: found 5 devices
500[ 0.595974] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
501[ 0.595982] pci 0000:00:1c.0: bridge window [io 0x1000-0x0fff] to [bus 04] add_size 1000
502[ 0.595983] pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 04] add_size 200000 add_align 100000
503[ 0.595984] pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff] to [bus 04] add_size 200000 add_align 100000
504[ 0.595986] pci 0000:00:1c.1: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 05] add_size 200000 add_align 100000
505[ 0.595999] pci 0000:00:1c.0: BAR 14: assigned [mem 0xf0000000-0xf01fffff]
506[ 0.596002] pci 0000:00:1c.0: BAR 15: assigned [mem 0xf0200000-0xf03fffff 64bit pref]
507[ 0.596005] pci 0000:00:1c.1: BAR 15: assigned [mem 0xf0400000-0xf05fffff 64bit pref]
508[ 0.596006] pci 0000:00:1c.0: BAR 13: assigned [io 0x1000-0x1fff]
509[ 0.596008] pci 0000:01:00.0: BAR 6: assigned [mem 0xfb900000-0xfb90ffff pref]
510[ 0.596010] pci 0000:00:01.0: PCI bridge to [bus 01]
511[ 0.596012] pci 0000:00:01.0: bridge window [io 0xc000-0xcfff]
512[ 0.596015] pci 0000:00:01.0: bridge window [mem 0xfb900000-0xfb9fffff]
513[ 0.596019] pci 0000:00:02.0: PCI bridge to [bus 02]
514[ 0.596022] pci 0000:00:02.0: bridge window [mem 0xfb700000-0xfb7fffff]
515[ 0.596027] pci 0000:03:00.0: BAR 6: assigned [mem 0xfb600000-0xfb61ffff pref]
516[ 0.596028] pci 0000:00:03.0: PCI bridge to [bus 03]
517[ 0.596029] pci 0000:00:03.0: bridge window [io 0xd000-0xdfff]
518[ 0.596031] pci 0000:00:03.0: bridge window [mem 0xfb600000-0xfb6fffff]
519[ 0.596033] pci 0000:00:03.0: bridge window [mem 0xd0000000-0xefffffff 64bit pref]
520[ 0.596037] pci 0000:00:1c.0: PCI bridge to [bus 04]
521[ 0.596039] pci 0000:00:1c.0: bridge window [io 0x1000-0x1fff]
522[ 0.596042] pci 0000:00:1c.0: bridge window [mem 0xf0000000-0xf01fffff]
523[ 0.596044] pci 0000:00:1c.0: bridge window [mem 0xf0200000-0xf03fffff 64bit pref]
524[ 0.596048] pci 0000:00:1c.1: PCI bridge to [bus 05]
525[ 0.596050] pci 0000:00:1c.1: bridge window [io 0xb000-0xbfff]
526[ 0.596053] pci 0000:00:1c.1: bridge window [mem 0xfbe00000-0xfbefffff]
527[ 0.596055] pci 0000:00:1c.1: bridge window [mem 0xf0400000-0xf05fffff 64bit pref]
528[ 0.596059] pci 0000:06:00.0: BAR 6: assigned [mem 0xfbd00000-0xfbd1ffff pref]
529[ 0.596061] pci 0000:00:1c.4: PCI bridge to [bus 06]
530[ 0.596062] pci 0000:00:1c.4: bridge window [io 0xa000-0xafff]
531[ 0.596065] pci 0000:00:1c.4: bridge window [mem 0xfbd00000-0xfbdfffff]
532[ 0.596068] pci 0000:00:1c.4: bridge window [mem 0xfbc00000-0xfbcfffff 64bit pref]
533[ 0.596072] pci 0000:07:00.0: BAR 6: assigned [mem 0xfbb00000-0xfbb1ffff pref]
534[ 0.596073] pci 0000:00:1c.5: PCI bridge to [bus 07]
535[ 0.596075] pci 0000:00:1c.5: bridge window [io 0xe000-0xefff]
536[ 0.596078] pci 0000:00:1c.5: bridge window [mem 0xfbb00000-0xfbbfffff]
537[ 0.596080] pci 0000:00:1c.5: bridge window [mem 0xfba00000-0xfbafffff 64bit pref]
538[ 0.596084] pci 0000:00:1e.0: PCI bridge to [bus 08]
539[ 0.596087] pci 0000:00:1e.0: bridge window [mem 0xfb800000-0xfb8fffff]
540[ 0.596093] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window]
541[ 0.596094] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window]
542[ 0.596095] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
543[ 0.596096] pci_bus 0000:00: resource 7 [mem 0x000c0000-0x000dffff window]
544[ 0.596097] pci_bus 0000:00: resource 8 [mem 0xcff00000-0xfebfffff window]
545[ 0.596098] pci_bus 0000:01: resource 0 [io 0xc000-0xcfff]
546[ 0.596099] pci_bus 0000:01: resource 1 [mem 0xfb900000-0xfb9fffff]
547[ 0.596100] pci_bus 0000:02: resource 1 [mem 0xfb700000-0xfb7fffff]
548[ 0.596100] pci_bus 0000:03: resource 0 [io 0xd000-0xdfff]
549[ 0.596101] pci_bus 0000:03: resource 1 [mem 0xfb600000-0xfb6fffff]
550[ 0.596102] pci_bus 0000:03: resource 2 [mem 0xd0000000-0xefffffff 64bit pref]
551[ 0.596103] pci_bus 0000:04: resource 0 [io 0x1000-0x1fff]
552[ 0.596104] pci_bus 0000:04: resource 1 [mem 0xf0000000-0xf01fffff]
553[ 0.596105] pci_bus 0000:04: resource 2 [mem 0xf0200000-0xf03fffff 64bit pref]
554[ 0.596106] pci_bus 0000:05: resource 0 [io 0xb000-0xbfff]
555[ 0.596107] pci_bus 0000:05: resource 1 [mem 0xfbe00000-0xfbefffff]
556[ 0.596107] pci_bus 0000:05: resource 2 [mem 0xf0400000-0xf05fffff 64bit pref]
557[ 0.596108] pci_bus 0000:06: resource 0 [io 0xa000-0xafff]
558[ 0.596109] pci_bus 0000:06: resource 1 [mem 0xfbd00000-0xfbdfffff]
559[ 0.596110] pci_bus 0000:06: resource 2 [mem 0xfbc00000-0xfbcfffff 64bit pref]
560[ 0.596111] pci_bus 0000:07: resource 0 [io 0xe000-0xefff]
561[ 0.596112] pci_bus 0000:07: resource 1 [mem 0xfbb00000-0xfbbfffff]
562[ 0.596113] pci_bus 0000:07: resource 2 [mem 0xfba00000-0xfbafffff 64bit pref]
563[ 0.596114] pci_bus 0000:08: resource 1 [mem 0xfb800000-0xfb8fffff]
564[ 0.596114] pci_bus 0000:08: resource 4 [io 0x0000-0x0cf7 window]
565[ 0.596115] pci_bus 0000:08: resource 5 [io 0x0d00-0xffff window]
566[ 0.596116] pci_bus 0000:08: resource 6 [mem 0x000a0000-0x000bffff window]
567[ 0.596117] pci_bus 0000:08: resource 7 [mem 0x000c0000-0x000dffff window]
568[ 0.596118] pci_bus 0000:08: resource 8 [mem 0xcff00000-0xfebfffff window]
569[ 0.596173] pci_bus 0000:3f: resource 4 [io 0x0000-0xffff]
570[ 0.596174] pci_bus 0000:3f: resource 5 [mem 0x00000000-0xfffffffff]
571[ 0.596201] NET: Registered protocol family 2
572[ 0.596332] tcp_listen_portaddr_hash hash table entries: 16384 (order: 6, 262144 bytes)
573[ 0.596425] TCP established hash table entries: 262144 (order: 9, 2097152 bytes)
574[ 0.596726] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
575[ 0.596856] TCP: Hash tables configured (established 262144 bind 65536)
576[ 0.596907] UDP hash table entries: 16384 (order: 7, 524288 bytes)
577[ 0.596990] UDP-Lite hash table entries: 16384 (order: 7, 524288 bytes)
578[ 0.597126] NET: Registered protocol family 1
579[ 0.597131] NET: Registered protocol family 44
580[ 0.617279] pci 0000:00:1a.7: quirk_usb_early_handoff+0x0/0x645 took 19174 usecs
581[ 0.637275] pci 0000:00:1d.7: quirk_usb_early_handoff+0x0/0x645 took 19073 usecs
582[ 0.637509] pci 0000:03:00.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
583[ 0.637520] pci 0000:05:00.0: async suspend disabled to avoid multi-function power-on ordering issue
584[ 0.637523] pci 0000:05:00.1: async suspend disabled to avoid multi-function power-on ordering issue
585[ 0.637555] PCI: CLS 64 bytes, default 64
586[ 0.637615] Trying to unpack rootfs image as initramfs...
587[ 2.396880] Freeing initrd memory: 20508K
588[ 2.396897] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
589[ 2.396898] software IO TLB: mapped [mem 0xcbee0000-0xcfee0000] (64MB)
590[ 2.397269] check: Scanning for low memory corruption every 60 seconds
591[ 2.397883] Initialise system trusted keyrings
592[ 2.397890] Key type blacklist registered
593[ 2.397930] workingset: timestamp_bits=37 max_order=23 bucket_order=0
594[ 2.399169] zbud: loaded
595[ 2.399638] Platform Keyring initialized
596[ 2.401105] Key type asymmetric registered
597[ 2.401106] Asymmetric key parser 'x509' registered
598[ 2.401112] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 248)
599[ 2.401147] io scheduler mq-deadline registered
600[ 2.401147] io scheduler kyber registered
601[ 2.401184] io scheduler bfq registered
602[ 2.401700] pcieport 0000:00:1c.0: enabling device (0000 -> 0003)
603[ 2.402276] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
604[ 2.402301] vesafb: mode is 1024x768x32, linelength=4096, pages=0
605[ 2.402301] vesafb: scrolling: redraw
606[ 2.402303] vesafb: Truecolor: size=0:8:8:8, shift=0:16:8:0
607[ 2.402316] vesafb: framebuffer at 0xd0000000, mapped to 0x(____ptrval____), using 3072k, total 3072k
608[ 2.402382] Console: switching to colour frame buffer device 128x48
609[ 2.497027] fb0: VESA VGA frame buffer device
610[ 2.497051] intel_idle: MWAIT substates: 0x1120
611[ 2.497052] intel_idle: v0.4.1 model 0x2C
612[ 2.497594] intel_idle: lapic_timer_reliable_states 0xffffffff
613[ 2.499907] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
614[ 2.501083] Non-volatile memory driver v1.3
615[ 2.501099] Linux agpgart interface v0.103
616[ 2.503589] ahci 0000:00:1f.2: version 3.0
617[ 2.503739] ahci 0000:00:1f.2: SSS flag set, parallel bus scan disabled
618[ 2.503774] ahci 0000:00:1f.2: AHCI 0001.0200 32 slots 6 ports 3 Gbps 0x3f impl SATA mode
619[ 2.503775] ahci 0000:00:1f.2: flags: 64bit ncq sntf stag pm led clo pmp pio slum part ccc ems
620[ 2.563790] scsi host0: ahci
621[ 2.564258] scsi host1: ahci
622[ 2.564679] scsi host2: ahci
623[ 2.565208] scsi host3: ahci
624[ 2.565745] scsi host4: ahci
625[ 2.566255] scsi host5: ahci
626[ 2.566353] ata1: SATA max UDMA/133 abar m2048@0xfbffc000 port 0xfbffc100 irq 31
627[ 2.566356] ata2: SATA max UDMA/133 abar m2048@0xfbffc000 port 0xfbffc180 irq 31
628[ 2.566358] ata3: SATA max UDMA/133 abar m2048@0xfbffc000 port 0xfbffc200 irq 31
629[ 2.566360] ata4: SATA max UDMA/133 abar m2048@0xfbffc000 port 0xfbffc280 irq 31
630[ 2.566362] ata5: SATA max UDMA/133 abar m2048@0xfbffc000 port 0xfbffc300 irq 31
631[ 2.566364] ata6: SATA max UDMA/133 abar m2048@0xfbffc000 port 0xfbffc380 irq 31
632[ 2.576682] ahci 0000:01:00.0: AHCI 0001.0200 32 slots 8 ports 6 Gbps 0xff impl SATA mode
633[ 2.576686] ahci 0000:01:00.0: flags: 64bit ncq pio
634[ 2.577496] scsi host6: ahci
635[ 2.577954] scsi host7: ahci
636[ 2.578424] scsi host8: ahci
637[ 2.578847] scsi host9: ahci
638[ 2.579338] scsi host10: ahci
639[ 2.579772] scsi host11: ahci
640[ 2.580241] scsi host12: ahci
641[ 2.580516] scsi host13: ahci
642[ 2.580573] ata7: SATA max UDMA/133 abar m2048@0xfb9ff000 port 0xfb9ff100 irq 32
643[ 2.580575] ata8: SATA max UDMA/133 abar m2048@0xfb9ff000 port 0xfb9ff180 irq 32
644[ 2.580576] ata9: SATA max UDMA/133 abar m2048@0xfb9ff000 port 0xfb9ff200 irq 32
645[ 2.580577] ata10: SATA max UDMA/133 abar m2048@0xfb9ff000 port 0xfb9ff280 irq 32
646[ 2.580578] ata11: SATA max UDMA/133 abar m2048@0xfb9ff000 port 0xfb9ff300 irq 32
647[ 2.580579] ata12: SATA max UDMA/133 abar m2048@0xfb9ff000 port 0xfb9ff380 irq 32
648[ 2.580581] ata13: SATA max UDMA/133 abar m2048@0xfb9ff000 port 0xfb9ff400 irq 32
649[ 2.580582] ata14: SATA max UDMA/133 abar m2048@0xfb9ff000 port 0xfb9ff480 irq 32
650[ 2.590813] ahci 0000:05:00.0: AHCI 0001.0000 32 slots 2 ports 3 Gbps 0x3 impl SATA mode
651[ 2.590815] ahci 0000:05:00.0: flags: 64bit ncq pm led clo pmp pio slum part
652[ 2.591243] scsi host14: ahci
653[ 2.591779] scsi host15: ahci
654[ 2.591878] ata15: SATA max UDMA/133 abar m8192@0xfbefe000 port 0xfbefe100 irq 17
655[ 2.591881] ata16: SATA max UDMA/133 abar m8192@0xfbefe000 port 0xfbefe180 irq 17
656[ 2.591958] i8042: PNP: No PS/2 controller found.
657[ 2.591958] i8042: Probing ports directly.
658[ 2.592410] serio: i8042 KBD port at 0x60,0x64 irq 1
659[ 2.592418] serio: i8042 AUX port at 0x60,0x64 irq 12
660[ 2.592798] mousedev: PS/2 mouse device common for all mice
661[ 2.592901] rtc_cmos 00:01: RTC can wake from S4
662[ 2.593173] rtc_cmos 00:01: registered as rtc0
663[ 2.593210] rtc_cmos 00:01: alarms up to one month, 242 bytes nvram, hpet irqs
664[ 2.593223] intel_pstate: CPU model not supported
665[ 2.594303] ledtrig-cpu: registered to indicate activity on CPUs
666[ 2.594315] hidraw: raw HID events driver (C) Jiri Kosina
667[ 2.594525] NET: Registered protocol family 10
668[ 2.603986] Segment Routing with IPv6
669[ 2.605917] mce: Using 9 MCE banks
670[ 2.605932] RAS: Correctable Errors collector initialized.
671[ 2.605967] microcode: sig=0x206c2, pf=0x1, revision=0x1f
672[ 2.606252] microcode: Microcode Update Driver: v2.2.
673[ 2.606261] sched_clock: Marking stable (2605599400, 213990)->(2613958234, -8144844)
674[ 2.606715] registered taskstats version 1
675[ 2.606718] Loading compiled-in X.509 certificates
676[ 2.606768] Loaded X.509 cert 'openSUSE Secure Boot Signkey: 0332fa9cbf0d88bf21924b0de82a09a54d5defc8'
677[ 2.606803] zswap: loaded using pool lzo/zbud
678[ 2.606935] page_owner is disabled
679[ 2.613933] Key type big_key registered
680[ 2.617389] Key type encrypted registered
681[ 2.617391] AppArmor: AppArmor sha1 policy hashing enabled
682[ 2.617396] ima: No TPM chip found, activating TPM-bypass!
683[ 2.617400] ima: Allocated hash algorithm: sha256
684[ 2.617407] No architecture policies found
685[ 2.617413] evm: Initialising EVM extended attributes:
686[ 2.617414] evm: security.selinux
687[ 2.617414] evm: security.apparmor
688[ 2.617415] evm: security.ima
689[ 2.617415] evm: security.capability
690[ 2.617416] evm: HMAC attrs: 0x1
691[ 2.617770] PM: Magic number: 3:697:332
692[ 2.617793] tty tty53: hash matches
693[ 2.617826] memory memory182: hash matches
694[ 2.617975] rtc_cmos 00:01: setting system clock to 2019-09-27T13:20:51 UTC (1569590451)
695[ 2.881950] ata1: SATA link down (SStatus 0 SControl 300)
696[ 2.893848] ata9: SATA link down (SStatus 0 SControl 300)
697[ 2.893973] ata13: SATA link down (SStatus 0 SControl 300)
698[ 2.894167] ata14: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
699[ 2.894188] ata11: SATA link down (SStatus 0 SControl 300)
700[ 2.894267] ata10: SATA link down (SStatus 0 SControl 300)
701[ 2.894384] ata12: SATA link down (SStatus 0 SControl 300)
702[ 2.894444] ata8: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
703[ 2.905984] ata15: SATA link down (SStatus 0 SControl 300)
704[ 2.906094] ata16: SATA link down (SStatus 0 SControl 300)
705[ 3.000608] ata8.00: failed to IDENTIFY (INIT_DEV_PARAMS failed, err_mask=0x80)
706[ 3.198213] ata2: SATA link down (SStatus 0 SControl 300)
707[ 3.403011] tsc: Refined TSC clocksource calibration: 3197.726 MHz
708[ 3.403243] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x2e17e64edfb, max_idle_ns: 440795351804 ns
709[ 3.403278] clocksource: Switched to clocksource tsc
710[ 3.514189] ata3: SATA link down (SStatus 0 SControl 300)
711[ 3.830192] ata4: SATA link down (SStatus 0 SControl 300)
712[ 4.146225] ata5: SATA link down (SStatus 0 SControl 300)
713[ 4.462114] ata6: SATA link down (SStatus 0 SControl 300)
714[ 8.139165] ata14.00: failed to IDENTIFY (device reports invalid type, err_mask=0x0)
715[ 8.139236] ata7: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
716[ 8.140326] ata7.00: ATA-9: ADATA SU900, Q0125A, max UDMA/133
717[ 8.140329] ata7.00: 500118192 sectors, multi 2: LBA48 NCQ (depth 32), AA
718[ 8.141374] ata7.00: configured for UDMA/133
719[ 8.141753] scsi 6:0:0:0: Direct-Access ATA ADATA SU900 5A PQ: 0 ANSI: 5
720[ 8.142167] sd 6:0:0:0: [sda] 500118192 512-byte logical blocks: (256 GB/238 GiB)
721[ 8.142180] sd 6:0:0:0: [sda] Write Protect is off
722[ 8.142182] sd 6:0:0:0: [sda] Mode Sense: 00 3a 00 00
723[ 8.142206] sd 6:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
724[ 8.355934] sda: sda1
725[ 8.356636] sd 6:0:0:0: [sda] Attached SCSI disk
726[ 8.454106] ata14: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
727[ 8.454261] ata8: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
728[ 8.454293] ata14.00: ATAPI: MARVELL VIRTUALL, 1.09, max UDMA/66
729[ 8.454591] ata14.00: configured for UDMA/66
730[ 8.456109] ata8.00: HPA detected: current 3907020911, native 3907029168
731[ 8.456113] ata8.00: ATA-8: ST32000641AS, CC12, max UDMA/133
732[ 8.456115] ata8.00: 3907020911 sectors, multi 8: LBA48 NCQ (depth 32)
733[ 8.458193] ata8.00: configured for UDMA/133
734[ 8.458576] scsi 7:0:0:0: Direct-Access ATA ST32000641AS CC12 PQ: 0 ANSI: 5
735[ 8.459361] scsi 13:0:0:0: Processor Marvell 91xx Config 1.01 PQ: 0 ANSI: 5
736[ 8.459381] sd 7:0:0:0: [sdb] 3907020911 512-byte logical blocks: (2.00 TB/1.82 TiB)
737[ 8.459450] sd 7:0:0:0: [sdb] Write Protect is off
738[ 8.459451] sd 7:0:0:0: [sdb] Mode Sense: 00 3a 00 00
739[ 8.459585] sd 7:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
740[ 8.469976] sdb: sdb1
741[ 8.470660] sd 7:0:0:0: [sdb] Attached SCSI disk
742[ 8.472266] Freeing unused decrypted memory: 2040K
743[ 8.472969] Freeing unused kernel image memory: 2108K
744[ 8.483017] Write protecting the kernel read-only data: 18432k
745[ 8.484322] Freeing unused kernel image memory: 2012K
746[ 8.484979] Freeing unused kernel image memory: 104K
747[ 8.485270] Run /init as init process
748[ 8.493685] systemd[1]: systemd +suse.135.g0f9271c133 running in system mode. (+PAM -AUDIT +SELINUX -IMA +APPARMOR -SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN2 -IDN +PCRE2 default-hierarchy=hybrid)
749[ 8.511170] systemd[1]: Detected architecture x86-64.
750[ 8.511172] systemd[1]: Running in initial RAM disk.
751[ 8.577249] systemd[1]: Set hostname to <linux-qz0r>.
752[ 8.621552] random: systemd: uninitialized urandom read (16 bytes read)
753[ 8.621562] systemd[1]: Reached target Local File Systems.
754[ 8.621601] random: systemd: uninitialized urandom read (16 bytes read)
755[ 8.621608] systemd[1]: Reached target Timers.
756[ 8.621616] random: systemd: uninitialized urandom read (16 bytes read)
757[ 8.621683] systemd[1]: Listening on Journal Socket (/dev/log).
758[ 8.621736] systemd[1]: Listening on udev Kernel Socket.
759[ 8.621751] systemd[1]: Reached target Slices.
760[ 8.621815] systemd[1]: Listening on udev Control Socket.
761[ 8.634079] alua: device handler registered
762[ 8.634600] emc: device handler registered
763[ 8.635190] rdac: device handler registered
764[ 8.639572] device-mapper: uevent: version 1.0.3
765[ 8.639657] device-mapper: ioctl: 4.40.0-ioctl (2019-01-18) initialised: dm-devel@redhat.com
766[ 8.642124] sd 6:0:0:0: Attached scsi generic sg0 type 0
767[ 8.642159] sd 7:0:0:0: Attached scsi generic sg1 type 0
768[ 8.642188] scsi 13:0:0:0: Attached scsi generic sg2 type 3
769[ 8.878122] random: crng init done
770[ 8.878124] random: 7 urandom warning(s) missed due to ratelimiting
771[ 9.103020] scsi host16: pata_jmicron
772[ 9.108784] scsi host17: pata_jmicron
773[ 9.108849] ata17: PATA max UDMA/100 cmd 0xbf00 ctl 0xbe00 bmdma 0xbb00 irq 18
774[ 9.108850] ata18: PATA max UDMA/100 cmd 0xbd00 ctl 0xbc00 bmdma 0xbb08 irq 18
775[ 9.111423] ACPI: bus type USB registered
776[ 9.111446] usbcore: registered new interface driver usbfs
777[ 9.111458] usbcore: registered new interface driver hub
778[ 9.111483] usbcore: registered new device driver usb
779[ 9.117986] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
780[ 9.119520] ehci-pci: EHCI PCI platform driver
781[ 9.119708] ehci-pci 0000:00:1a.7: EHCI Host Controller
782[ 9.119715] ehci-pci 0000:00:1a.7: new USB bus registered, assigned bus number 1
783[ 9.119728] ehci-pci 0000:00:1a.7: debug port 1
784[ 9.119881] uhci_hcd: USB Universal Host Controller Interface driver
785[ 9.123651] ehci-pci 0000:00:1a.7: cache line size of 64 is not supported
786[ 9.123659] ehci-pci 0000:00:1a.7: irq 18, io mem 0xfbffe000
787[ 9.138972] ehci-pci 0000:00:1a.7: USB 2.0 started, EHCI 1.00
788[ 9.139081] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.02
789[ 9.139084] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
790[ 9.139085] usb usb1: Product: EHCI Host Controller
791[ 9.139086] usb usb1: Manufacturer: Linux 5.2.14-1-default ehci_hcd
792[ 9.139087] usb usb1: SerialNumber: 0000:00:1a.7
793[ 9.139232] hub 1-0:1.0: USB hub found
794[ 9.139247] hub 1-0:1.0: 6 ports detected
795[ 9.139483] xhci_hcd 0000:02:00.0: xHCI Host Controller
796[ 9.139490] xhci_hcd 0000:02:00.0: new USB bus registered, assigned bus number 2
797[ 9.139588] xhci_hcd 0000:02:00.0: hcc params 0x014042cb hci version 0x96 quirks 0x0000000000000004
798[ 9.139801] uhci_hcd 0000:00:1a.0: UHCI Host Controller
799[ 9.139809] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3
800[ 9.139815] uhci_hcd 0000:00:1a.0: detected 2 ports
801[ 9.139839] uhci_hcd 0000:00:1a.0: irq 16, io base 0x0000ff00
802[ 9.139924] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.02
803[ 9.139926] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
804[ 9.139928] usb usb2: Product: xHCI Host Controller
805[ 9.139929] usb usb2: Manufacturer: Linux 5.2.14-1-default xhci-hcd
806[ 9.139931] usb usb2: SerialNumber: 0000:02:00.0
807[ 9.140054] hub 2-0:1.0: USB hub found
808[ 9.140069] hub 2-0:1.0: 2 ports detected
809[ 9.140236] xhci_hcd 0000:02:00.0: xHCI Host Controller
810[ 9.140264] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 5.02
811[ 9.140266] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
812[ 9.140267] usb usb3: Product: UHCI Host Controller
813[ 9.140268] usb usb3: Manufacturer: Linux 5.2.14-1-default uhci_hcd
814[ 9.140268] usb usb3: SerialNumber: 0000:00:1a.0
815[ 9.140362] hub 3-0:1.0: USB hub found
816[ 9.140377] hub 3-0:1.0: 2 ports detected
817[ 9.140500] xhci_hcd 0000:02:00.0: new USB bus registered, assigned bus number 4
818[ 9.140504] xhci_hcd 0000:02:00.0: Host supports USB 3.0 SuperSpeed
819[ 9.140526] ehci-pci 0000:00:1d.7: EHCI Host Controller
820[ 9.140531] ehci-pci 0000:00:1d.7: new USB bus registered, assigned bus number 5
821[ 9.140541] ehci-pci 0000:00:1d.7: debug port 1
822[ 9.142982] usb usb4: We don't know the algorithms for LPM for this host, disabling LPM.
823[ 9.143018] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.02
824[ 9.143021] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
825[ 9.143023] usb usb4: Product: xHCI Host Controller
826[ 9.143024] usb usb4: Manufacturer: Linux 5.2.14-1-default xhci-hcd
827[ 9.143025] usb usb4: SerialNumber: 0000:02:00.0
828[ 9.143140] hub 4-0:1.0: USB hub found
829[ 9.143162] hub 4-0:1.0: 2 ports detected
830[ 9.144432] ehci-pci 0000:00:1d.7: cache line size of 64 is not supported
831[ 9.144444] ehci-pci 0000:00:1d.7: irq 23, io mem 0xfbffd000
832[ 9.159002] ehci-pci 0000:00:1d.7: USB 2.0 started, EHCI 1.00
833[ 9.159266] usb usb5: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.02
834[ 9.159268] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
835[ 9.159269] usb usb5: Product: EHCI Host Controller
836[ 9.159270] usb usb5: Manufacturer: Linux 5.2.14-1-default ehci_hcd
837[ 9.159271] usb usb5: SerialNumber: 0000:00:1d.7
838[ 9.159494] hub 5-0:1.0: USB hub found
839[ 9.159537] hub 5-0:1.0: 6 ports detected
840[ 9.159818] uhci_hcd 0000:00:1a.1: UHCI Host Controller
841[ 9.159826] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 6
842[ 9.159832] uhci_hcd 0000:00:1a.1: detected 2 ports
843[ 9.159866] uhci_hcd 0000:00:1a.1: irq 21, io base 0x0000fe00
844[ 9.159963] usb usb6: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 5.02
845[ 9.159964] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
846[ 9.159965] usb usb6: Product: UHCI Host Controller
847[ 9.159966] usb usb6: Manufacturer: Linux 5.2.14-1-default uhci_hcd
848[ 9.159967] usb usb6: SerialNumber: 0000:00:1a.1
849[ 9.160071] hub 6-0:1.0: USB hub found
850[ 9.160082] hub 6-0:1.0: 2 ports detected
851[ 9.160382] uhci_hcd 0000:00:1a.2: UHCI Host Controller
852[ 9.160387] uhci_hcd 0000:00:1a.2: new USB bus registered, assigned bus number 7
853[ 9.160392] uhci_hcd 0000:00:1a.2: detected 2 ports
854[ 9.160410] uhci_hcd 0000:00:1a.2: irq 18, io base 0x0000fd00
855[ 9.160480] usb usb7: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 5.02
856[ 9.160481] usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1
857[ 9.160482] usb usb7: Product: UHCI Host Controller
858[ 9.160482] usb usb7: Manufacturer: Linux 5.2.14-1-default uhci_hcd
859[ 9.160483] usb usb7: SerialNumber: 0000:00:1a.2
860[ 9.160588] hub 7-0:1.0: USB hub found
861[ 9.160599] hub 7-0:1.0: 2 ports detected
862[ 9.160805] uhci_hcd 0000:00:1d.0: UHCI Host Controller
863[ 9.160810] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 8
864[ 9.160816] uhci_hcd 0000:00:1d.0: detected 2 ports
865[ 9.160832] uhci_hcd 0000:00:1d.0: irq 23, io base 0x0000fc00
866[ 9.160902] usb usb8: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 5.02
867[ 9.160903] usb usb8: New USB device strings: Mfr=3, Product=2, SerialNumber=1
868[ 9.160905] usb usb8: Product: UHCI Host Controller
869[ 9.160906] usb usb8: Manufacturer: Linux 5.2.14-1-default uhci_hcd
870[ 9.160908] usb usb8: SerialNumber: 0000:00:1d.0
871[ 9.161017] hub 8-0:1.0: USB hub found
872[ 9.161028] hub 8-0:1.0: 2 ports detected
873[ 9.161276] uhci_hcd 0000:00:1d.1: UHCI Host Controller
874[ 9.161283] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 9
875[ 9.161289] uhci_hcd 0000:00:1d.1: detected 2 ports
876[ 9.161313] uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000fb00
877[ 9.161376] usb usb9: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 5.02
878[ 9.161377] usb usb9: New USB device strings: Mfr=3, Product=2, SerialNumber=1
879[ 9.161378] usb usb9: Product: UHCI Host Controller
880[ 9.161379] usb usb9: Manufacturer: Linux 5.2.14-1-default uhci_hcd
881[ 9.161380] usb usb9: SerialNumber: 0000:00:1d.1
882[ 9.161474] hub 9-0:1.0: USB hub found
883[ 9.161485] hub 9-0:1.0: 2 ports detected
884[ 9.161701] uhci_hcd 0000:00:1d.2: UHCI Host Controller
885[ 9.161705] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 10
886[ 9.161710] uhci_hcd 0000:00:1d.2: detected 2 ports
887[ 9.161728] uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000fa00
888[ 9.161795] usb usb10: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 5.02
889[ 9.161797] usb usb10: New USB device strings: Mfr=3, Product=2, SerialNumber=1
890[ 9.161798] usb usb10: Product: UHCI Host Controller
891[ 9.161800] usb usb10: Manufacturer: Linux 5.2.14-1-default uhci_hcd
892[ 9.161801] usb usb10: SerialNumber: 0000:00:1d.2
893[ 9.161910] hub 10-0:1.0: USB hub found
894[ 9.161921] hub 10-0:1.0: 2 ports detected
895[ 9.175043] firewire_ohci 0000:08:06.0: added OHCI v1.10 device as card 0, 4 IR + 8 IT contexts, quirks 0x2
896[ 9.179088] [drm] radeon kernel modesetting enabled.
897[ 9.179146] radeon 0000:03:00.0: remove_conflicting_pci_framebuffers: bar 0: 0xd0000000 -> 0xdfffffff
898[ 9.179147] radeon 0000:03:00.0: remove_conflicting_pci_framebuffers: bar 2: 0xef800000 -> 0xefffffff
899[ 9.179148] radeon 0000:03:00.0: remove_conflicting_pci_framebuffers: bar 5: 0xfb680000 -> 0xfb6bffff
900[ 9.179150] checking generic (d0000000 300000) vs hw (d0000000 10000000)
901[ 9.179150] fb0: switching to radeondrmfb from VESA VGA
902[ 9.340666] Console: switching to colour dummy device 80x25
903[ 9.340941] radeon 0000:03:00.0: vgaarb: deactivate vga console
904[ 9.341321] radeon 0000:03:00.0: CIK support disabled by module param
905[ 9.343830] AMD-Vi: AMD IOMMUv2 driver by Joerg Roedel <jroedel@suse.de>
906[ 9.343830] AMD-Vi: AMD IOMMUv2 functionality not available on this system
907[ 9.405922] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
908[ 9.443849] [drm] amdgpu kernel modesetting enabled.
909[ 9.444296] CRAT table not found
910[ 9.444299] Virtual CRAT table created for CPU
911[ 9.444300] Parsing CRAT table with 1 nodes
912[ 9.444302] Creating topology SYSFS entries
913[ 9.444314] Topology: Add CPU node
914[ 9.444315] Finished initializing topology
915[ 9.444397] amdgpu 0000:03:00.0: remove_conflicting_pci_framebuffers: bar 0: 0xd0000000 -> 0xdfffffff
916[ 9.444399] amdgpu 0000:03:00.0: remove_conflicting_pci_framebuffers: bar 2: 0xef800000 -> 0xefffffff
917[ 9.444401] amdgpu 0000:03:00.0: remove_conflicting_pci_framebuffers: bar 5: 0xfb680000 -> 0xfb6bffff
918[ 9.444403] amdgpu 0000:03:00.0: vgaarb: deactivate vga console
919[ 9.444699] [drm] initializing kernel modesetting (HAWAII 0x1002:0x67B1 0x1682:0x9390 0x80).
920[ 9.444708] [drm] register mmio base: 0xFB680000
921[ 9.444708] [drm] register mmio size: 262144
922[ 9.444718] [drm] add ip block number 0 <cik_common>
923[ 9.444719] [drm] add ip block number 1 <gmc_v7_0>
924[ 9.444719] [drm] add ip block number 2 <cik_ih>
925[ 9.444720] [drm] add ip block number 3 <gfx_v7_0>
926[ 9.444720] [drm] add ip block number 4 <cik_sdma>
927[ 9.444721] [drm] add ip block number 5 <powerplay>
928[ 9.444722] [drm] add ip block number 6 <dm>
929[ 9.444722] [drm] add ip block number 7 <uvd_v4_2>
930[ 9.444723] [drm] add ip block number 8 <vce_v2_0>
931[ 9.444800] resource sanity check: requesting [mem 0x000c0000-0x000dffff], which spans more than pnp 00:04 [mem 0x000d3000-0x000d3fff]
932[ 9.444804] caller pci_map_rom+0x6a/0x17d mapping multiple BARs
933[ 9.448508] ATOM BIOS: 113-GRENADA_PRO_C671_D5_8GB_HYMIC_W8
934[ 9.448537] [drm] RAS INFO: ras initialized successfully, hardware ability[0] ras_mask[0]
935[ 9.448540] [drm] vm size is 128 GB, 2 levels, block size is 10-bit, fragment size is 9-bit
936[ 9.448569] amdgpu 0000:03:00.0: VRAM: 8192M 0x000000F400000000 - 0x000000F5FFFFFFFF (8192M used)
937[ 9.448570] amdgpu 0000:03:00.0: GART: 1024M 0x000000FF00000000 - 0x000000FF3FFFFFFF
938[ 9.448577] [drm] Detected VRAM RAM=8192M, BAR=256M
939[ 9.448577] [drm] RAM width 512bits GDDR5
940[ 9.448652] [TTM] Zone kernel: Available graphics memory: 12333710 KiB
941[ 9.448653] [TTM] Zone dma32: Available graphics memory: 2097152 KiB
942[ 9.448653] [TTM] Initializing pool allocator
943[ 9.448657] [TTM] Initializing DMA pool allocator
944[ 9.449086] [drm] amdgpu: 8192M of VRAM memory ready
945[ 9.449089] [drm] amdgpu: 8192M of GTT memory ready.
946[ 9.449100] [drm] GART: num cpu pages 262144, num gpu pages 262144
947[ 9.450154] [drm] PCIE GART of 1024M enabled (table at 0x000000F400300000).
948[ 9.450896] [drm] Found UVD firmware Version: 1.64 Family ID: 9
949[ 9.451408] [drm] Found VCE firmware Version: 50.10 Binary ID: 2
950[ 9.451705] [drm] PCIE gen 2 link speeds already enabled
951[ 9.471357] [drm] dce110_link_encoder_construct: Failed to get encoder_cap_info from VBIOS with error code 4!
952[ 9.471371] [drm] dce110_link_encoder_construct: Failed to get encoder_cap_info from VBIOS with error code 4!
953[ 9.471384] [drm] dce110_link_encoder_construct: Failed to get encoder_cap_info from VBIOS with error code 4!
954[ 9.479043] usb 2-1: new high-speed USB device number 2 using xhci_hcd
955[ 9.498997] [drm] Display Core initialized with v3.2.27!
956[ 9.548433] [drm] SADs count is: -2, don't need to read it
957[ 9.548442] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
958[ 9.548442] [drm] Driver supports precise vblank timestamp query.
959[ 9.583938] [drm] UVD initialized successfully.
960[ 9.611039] usb 3-1: new low-speed USB device number 2 using uhci_hcd
961[ 9.630192] usb 2-1: New USB device found, idVendor=05e3, idProduct=0606, bcdDevice= 7.02
962[ 9.630193] usb 2-1: New USB device strings: Mfr=0, Product=1, SerialNumber=0
963[ 9.630194] usb 2-1: Product: USB2.0 Hub
964[ 9.631757] hub 2-1:1.0: USB hub found
965[ 9.632470] hub 2-1:1.0: 4 ports detected
966[ 9.699044] usb 8-1: new full-speed USB device number 2 using uhci_hcd
967[ 9.703993] [drm] VCE initialized successfully.
968[ 9.710497] kfd kfd: Allocated 3969056 bytes on gart
969[ 9.710508] Virtual CRAT table created for GPU
970[ 9.710509] Parsing CRAT table with 1 nodes
971[ 9.710519] Creating topology SYSFS entries
972[ 9.710610] Topology: Add dGPU node [0x67b1:0x1002]
973[ 9.710646] kfd kfd: added device 1002:67b1
974[ 9.711223] firewire_core 0000:08:06.0: created device fw0: GUID 005966b9006cf049, S400
975[ 9.712014] [drm] fb mappable at 0xD06EB000
976[ 9.712016] [drm] vram apper at 0xD0000000
977[ 9.712017] [drm] size 8294400
978[ 9.712018] [drm] fb depth is 24
979[ 9.712018] [drm] pitch is 7680
980[ 9.712143] fbcon: amdgpudrmfb (fb0) is primary device
981[ 9.773045] Console: switching to colour frame buffer device 240x67
982[ 9.791461] amdgpu 0000:03:00.0: fb0: amdgpudrmfb frame buffer device
983[ 9.807048] usb 3-1: New USB device found, idVendor=046d, idProduct=c069, bcdDevice=56.01
984[ 9.807051] usb 3-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
985[ 9.807053] usb 3-1: Product: USB Laser Mouse
986[ 9.807055] usb 3-1: Manufacturer: Logitech
987[ 9.815964] [drm] Initialized amdgpu 3.32.0 20150101 for 0000:03:00.0 on minor 0
988[ 9.903030] usb 8-1: New USB device found, idVendor=1131, idProduct=1004, bcdDevice= 3.73
989[ 9.903032] usb 8-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
990[ 9.903033] usb 8-1: Product: ISSCEDRBTA
991[ 9.903034] usb 8-1: Manufacturer: ISSC
992[ 9.923050] usb 2-1.4: new high-speed USB device number 3 using xhci_hcd
993[ 9.935268] systemd-journald[316]: Received SIGTERM from PID 1 (systemd).
994[ 9.958597] printk: systemd: 24 output lines suppressed due to ratelimiting
995[ 10.026224] usb 2-1.4: New USB device found, idVendor=05e3, idProduct=0606, bcdDevice= 7.02
996[ 10.026226] usb 2-1.4: New USB device strings: Mfr=0, Product=1, SerialNumber=0
997[ 10.026227] usb 2-1.4: Product: USB2.0 Hub
998[ 10.027622] hub 2-1.4:1.0: USB hub found
999[ 10.028221] hub 2-1.4:1.0: 4 ports detected
1000[ 10.083606] systemd[1]: systemd +suse.135.g0f9271c133 running in system mode. (+PAM -AUDIT +SELINUX -IMA +APPARMOR -SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN2 -IDN +PCRE2 default-hierarchy=hybrid)
1001[ 10.084017] systemd[1]: Detected architecture x86-64.
1002[ 10.084432] systemd[1]: Set hostname to <linux-qz0r>.
1003[ 10.226417] systemd[1]: /usr/lib/systemd/system/auditd.service:12: PIDFile= references a path below legacy directory /var/run/, updating /var/run/auditd.pid → /run/auditd.pid; please update the unit file accordingly.
1004[ 10.395017] usb 5-2: new high-speed USB device number 3 using ehci-pci
1005[ 10.552325] usb 5-2: New USB device found, idVendor=0bda, idProduct=8179, bcdDevice= 0.00
1006[ 10.552328] usb 5-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
1007[ 10.552330] usb 5-2: Product: 802.11n NIC
1008[ 10.552332] usb 5-2: Manufacturer: Realtek
1009[ 10.552334] usb 5-2: SerialNumber: 00E04C0001
1010[ 10.583015] usb 3-2: new full-speed USB device number 3 using uhci_hcd
1011[ 10.699170] systemd[1]: /usr/lib/systemd/system/display-manager.service:12: PIDFile= references a path below legacy directory /var/run/, updating /var/run/displaymanager.pid → /run/displaymanager.pid; please update the unit file accordingly.
1012[ 10.726136] systemd[1]: /usr/lib/systemd/system/chronyd.service:14: PIDFile= references a path below legacy directory /var/run/, updating /var/run/chrony/chronyd.pid → /run/chrony/chronyd.pid; please update the unit file accordingly.
1013[ 10.727432] systemd[1]: /usr/lib/systemd/system/ntpd.service:15: PIDFile= references a path below legacy directory /var/run/, updating /var/run/ntp/ntpd.pid → /run/ntp/ntpd.pid; please update the unit file accordingly.
1014[ 10.769152] systemd[1]: /usr/lib/systemd/system/pcscd.socket:5: ListenStream= references a path below legacy directory /var/run/, updating /var/run/pcscd/pcscd.comm → /run/pcscd/pcscd.comm; please update the unit file accordingly.
1015[ 10.789048] usb 3-2: New USB device found, idVendor=046d, idProduct=c318, bcdDevice=55.03
1016[ 10.789050] usb 3-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
1017[ 10.789051] usb 3-2: Product: Logitech Illuminated Keyboard
1018[ 10.789051] usb 3-2: Manufacturer: Logitech
1019[ 10.840230] systemd[1]: haveged.service: Main process exited, code=exited, status=1/FAILURE
1020[ 10.840299] systemd[1]: haveged.service: Failed with result 'exit-code'.
1021[ 10.854653] EXT4-fs (sda1): re-mounted. Opts: acl,user_xattr
1022[ 10.912849] audit: type=1400 audit(1569590459.789:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="ping" pid=614 comm="apparmor_parser"
1023[ 10.946869] audit: type=1400 audit(1569590459.821:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="ghostscript" pid=631 comm="apparmor_parser"
1024[ 10.946871] audit: type=1400 audit(1569590459.821:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="ghostscript///usr/bin/basename" pid=631 comm="apparmor_parser"
1025[ 10.946872] audit: type=1400 audit(1569590459.821:5): apparmor="STATUS" operation="profile_load" profile="unconfined" name="ghostscript///usr/bin/dirname" pid=631 comm="apparmor_parser"
1026[ 10.946872] audit: type=1400 audit(1569590459.821:6): apparmor="STATUS" operation="profile_load" profile="unconfined" name="ghostscript///usr/bin/hpijs" pid=631 comm="apparmor_parser"
1027[ 10.946873] audit: type=1400 audit(1569590459.821:7): apparmor="STATUS" operation="profile_load" profile="unconfined" name="ghostscript//tempdir" pid=631 comm="apparmor_parser"
1028[ 10.967464] audit: type=1400 audit(1569590459.845:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="lsb_release" pid=641 comm="apparmor_parser"
1029[ 10.981201] audit: type=1400 audit(1569590459.857:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="nvidia_modprobe" pid=648 comm="apparmor_parser"
1030[ 10.981203] audit: type=1400 audit(1569590459.857:10): apparmor="STATUS" operation="profile_load" profile="unconfined" name="nvidia_modprobe//kmod" pid=648 comm="apparmor_parser"
1031[ 10.993514] audit: type=1400 audit(1569590459.869:11): apparmor="STATUS" operation="profile_load" profile="unconfined" name="klogd" pid=655 comm="apparmor_parser"
1032[ 11.064556] systemd-journald[582]: Received request to flush runtime journal from PID 1
1033[ 11.146965] usb 1-3: new high-speed USB device number 4 using ehci-pci
1034[ 11.239560] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input3
1035[ 11.239614] ACPI: Power Button [PWRB]
1036[ 11.241329] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input4
1037[ 11.241400] ACPI: Power Button [PWRF]
1038[ 11.266270] EDAC MC0: Giving out device to module i7core_edac.c controller i7 core #0: DEV 0000:3f:03.0 (INTERRUPT)
1039[ 11.266305] EDAC PCI0: Giving out device to module i7core_edac controller EDAC PCI controller: DEV 0000:3f:03.0 (POLLED)
1040[ 11.266317] EDAC i7core: Driver loaded, 1 memory controller(s) found.
1041[ 11.277424] ACPI Warning: SystemIO range 0x0000000000000428-0x000000000000042F conflicts with OpRegion 0x000000000000042C-0x000000000000042D (\GP2C) (20190509/utaddress-204)
1042[ 11.277430] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
1043[ 11.277460] lpc_ich: Resource conflict(s) found affecting gpio_ich
1044[ 11.324841] usb 1-3: New USB device found, idVendor=045e, idProduct=076d, bcdDevice= 1.03
1045[ 11.324843] usb 1-3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
1046[ 11.324845] usb 1-3: Product: Microsoft® LifeCam HD-5000
1047[ 11.324846] usb 1-3: Manufacturer: Microsoft
1048[ 11.327482] i801_smbus 0000:00:1f.3: SMBus using PCI interrupt
1049[ 11.327612] input: PC Speaker as /devices/platform/pcspkr/input/input5
1050[ 11.334544] r8169 0000:06:00.0: can't disable ASPM; OS doesn't have ASPM control
1051[ 11.334794] cryptd: max_cpu_qlen set to 1000
1052[ 11.338278] libphy: r8169: probed
1053[ 11.338781] r8169 0000:06:00.0 eth0: RTL8168d/8111d, 00:24:1d:cf:67:7d, XID 283, IRQ 42
1054[ 11.338782] r8169 0000:06:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
1055[ 11.338800] r8169 0000:07:00.0: can't disable ASPM; OS doesn't have ASPM control
1056[ 11.340937] libphy: r8169: probed
1057[ 11.341469] r8169 0000:07:00.0 eth1: RTL8168d/8111d, 00:24:1d:cf:67:6d, XID 283, IRQ 43
1058[ 11.341471] r8169 0000:07:00.0 eth1: jumbo features [frames: 9200 bytes, tx checksumming: ko]
1059[ 11.349742] snd_hda_intel 0000:03:00.1: Handle vga_switcheroo audio client
1060[ 11.349744] snd_hda_intel 0000:03:00.1: Force to non-snoop mode
1061[ 11.351328] SSE version of gcm_enc/dec engaged.
1062[ 11.373661] input: HDA ATI HDMI HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:03.0/0000:03:00.1/sound/card1/input6
1063[ 11.373705] input: HDA ATI HDMI HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:03.0/0000:03:00.1/sound/card1/input7
1064[ 11.373742] input: HDA ATI HDMI HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:03.0/0000:03:00.1/sound/card1/input8
1065[ 11.373780] input: HDA ATI HDMI HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:03.0/0000:03:00.1/sound/card1/input9
1066[ 11.373821] input: HDA ATI HDMI HDMI/DP,pcm=10 as /devices/pci0000:00/0000:00:03.0/0000:03:00.1/sound/card1/input10
1067[ 11.373858] input: HDA ATI HDMI HDMI/DP,pcm=11 as /devices/pci0000:00/0000:00:03.0/0000:03:00.1/sound/card1/input11
1068[ 11.376901] snd_hda_codec_realtek hdaudioC0D2: autoconfig for ALC889: line_outs=4 (0x14/0x15/0x16/0x17/0x0) type:line
1069[ 11.376903] snd_hda_codec_realtek hdaudioC0D2: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
1070[ 11.376905] snd_hda_codec_realtek hdaudioC0D2: hp_outs=1 (0x1b/0x0/0x0/0x0/0x0)
1071[ 11.376907] snd_hda_codec_realtek hdaudioC0D2: mono: mono_out=0x0
1072[ 11.376908] snd_hda_codec_realtek hdaudioC0D2: dig-out=0x11/0x1e
1073[ 11.376909] snd_hda_codec_realtek hdaudioC0D2: inputs:
1074[ 11.376911] snd_hda_codec_realtek hdaudioC0D2: Front Mic=0x19
1075[ 11.376913] snd_hda_codec_realtek hdaudioC0D2: Rear Mic=0x18
1076[ 11.376914] snd_hda_codec_realtek hdaudioC0D2: Line=0x1a
1077[ 11.376915] snd_hda_codec_realtek hdaudioC0D2: dig-in=0x1f
1078[ 11.392027] input: HDA Intel Front Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input12
1079[ 11.392086] input: HDA Intel Rear Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input13
1080[ 11.392145] input: HDA Intel Line as /devices/pci0000:00/0000:00:1b.0/sound/card0/input14
1081[ 11.392200] input: HDA Intel Line Out Front as /devices/pci0000:00/0000:00:1b.0/sound/card0/input15
1082[ 11.392257] input: HDA Intel Line Out Surround as /devices/pci0000:00/0000:00:1b.0/sound/card0/input16
1083[ 11.392313] input: HDA Intel Line Out CLFE as /devices/pci0000:00/0000:00:1b.0/sound/card0/input17
1084[ 11.392836] input: HDA Intel Line Out Side as /devices/pci0000:00/0000:00:1b.0/sound/card0/input18
1085[ 11.392936] input: HDA Intel Front Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input19
1086[ 11.404049] usbcore: registered new interface driver usbhid
1087[ 11.404051] usbhid: USB HID core driver
1088[ 11.408802] Bluetooth: Core ver 2.22
1089[ 11.408814] NET: Registered protocol family 31
1090[ 11.408815] Bluetooth: HCI device and connection manager initialized
1091[ 11.408818] Bluetooth: HCI socket layer initialized
1092[ 11.408819] Bluetooth: L2CAP socket layer initialized
1093[ 11.408822] Bluetooth: SCO socket layer initialized
1094[ 11.423638] usbcore: registered new interface driver btusb
1095[ 11.427432] cfg80211: Loading compiled-in X.509 certificates for regulatory database
1096[ 11.427675] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
1097[ 11.430701] lib80211: common routines for IEEE802.11 drivers
1098[ 11.430703] lib80211_crypt: registered algorithm 'NULL'
1099[ 11.446558] r8188eu: module is from the staging directory, the quality is unknown, you have been warned.
1100[ 11.479462] iTCO_vendor_support: vendor-support=0
1101[ 11.479836] gpio_ich gpio_ich.1.auto: GPIO from 451 to 511
1102[ 11.484315] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11
1103[ 11.484344] iTCO_wdt: unable to reset NO_REBOOT flag, device disabled by hardware/BIOS
1104[ 11.484864] Chip Version Info: CHIP_8188E_Normal_Chip_TSMC_D_CUT_1T1R_RomVer(0)
1105[ 11.486626] input: Logitech USB Laser Mouse as /devices/pci0000:00/0000:00:1a.0/usb3/3-1/3-1:1.0/0003:046D:C069.0001/input/input20
1106[ 11.486757] hid-generic 0003:046D:C069.0001: input,hidraw0: USB HID v1.10 Mouse [Logitech USB Laser Mouse] on usb-0000:00:1a.0-1/input0
1107[ 11.486949] input: Logitech Logitech Illuminated Keyboard as /devices/pci0000:00/0000:00:1a.0/usb3/3-2/3-2:1.0/0003:046D:C318.0002/input/input21
1108[ 11.538566] usbcore: registered new interface driver r8188eu
1109[ 11.547155] hid-generic 0003:046D:C318.0002: input,hidraw1: USB HID v1.11 Keyboard [Logitech Logitech Illuminated Keyboard] on usb-0000:00:1a.0-2/input0
1110[ 11.547471] input: Logitech Logitech Illuminated Keyboard Consumer Control as /devices/pci0000:00/0000:00:1a.0/usb3/3-2/3-2:1.1/0003:046D:C318.0003/input/input22
1111[ 11.588483] kvm: VM_EXIT_LOAD_IA32_PERF_GLOBAL_CTRL does not work properly. Using workaround
1112[ 11.611528] hid-generic 0003:046D:C318.0003: input,hiddev96,hidraw2: USB HID v1.11 Device [Logitech Logitech Illuminated Keyboard] on usb-0000:00:1a.0-2/input1
1113[ 11.662971] usb 6-2: new full-speed USB device number 2 using uhci_hcd
1114[ 11.806831] EXT4-fs (sdb1): mounted filesystem with ordered data mode. Opts: data=ordered,acl,user_xattr
1115[ 11.850486] usb 6-2: New USB device found, idVendor=056a, idProduct=00d1, bcdDevice= 1.06
1116[ 11.850488] usb 6-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
1117[ 11.850489] usb 6-2: Product: CTH-460
1118[ 11.850490] usb 6-2: Manufacturer: Wacom Co.,Ltd.
1119[ 11.859907] input: Wacom Co.,Ltd. CTH-460 Mouse as /devices/pci0000:00/0000:00:1a.1/usb6/6-2/6-2:1.0/0003:056A:00D1.0004/input/input24
1120[ 11.860432] hid-generic 0003:056A:00D1.0004: input,hiddev97,hidraw3: USB HID v1.00 Mouse [Wacom Co.,Ltd. CTH-460] on usb-0000:00:1a.1-2/input0
1121[ 11.863742] hid-generic 0003:056A:00D1.0005: hiddev98,hidraw4: USB HID v1.00 Device [Wacom Co.,Ltd. CTH-460] on usb-0000:00:1a.1-2/input1
1122[ 11.944114] it87: Found IT8720F chip at 0x290, revision 8
1123[ 11.944123] it87: VID is disabled (pins used for GPIO)
1124[ 11.944132] it87: Routing internal VCCH5V to in7
1125[ 11.944135] it87: Beeping is supported
1126[ 12.011369] input: Wacom Bamboo 2FG 4x5 Pen as /devices/pci0000:00/0000:00:1a.1/usb6/6-2/6-2:1.0/0003:056A:00D1.0004/input/input26
1127[ 12.011523] wacom 0003:056A:00D1.0004: hidraw3: USB HID v1.00 Mouse [Wacom Co.,Ltd. CTH-460] on usb-0000:00:1a.1-2/input0
1128[ 12.011789] input: Wacom Bamboo 2FG 4x5 Finger as /devices/pci0000:00/0000:00:1a.1/usb6/6-2/6-2:1.1/0003:056A:00D1.0005/input/input30
1129[ 12.011884] input: Wacom Bamboo 2FG 4x5 Pad as /devices/pci0000:00/0000:00:1a.1/usb6/6-2/6-2:1.1/0003:056A:00D1.0005/input/input31
1130[ 12.011996] wacom 0003:056A:00D1.0005: hidraw4: USB HID v1.00 Device [Wacom Co.,Ltd. CTH-460] on usb-0000:00:1a.1-2/input1
1131[ 12.041179] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
1132[ 12.041181] Bluetooth: BNEP filters: protocol multicast
1133[ 12.041184] Bluetooth: BNEP socket layer initialized
1134[ 12.111218] vboxdrv: loading out-of-tree module taints kernel.
1135[ 12.119032] vboxdrv: Found 12 processor cores
1136[ 12.139404] vboxdrv: TSC mode is Invariant, tentative frequency 3197716716 Hz
1137[ 12.139405] vboxdrv: Successfully loaded version 6.0.12_SUSE (interface 0x00290008)
1138[ 12.345979] VBoxNetFlt: Successfully started.
1139[ 12.349943] VBoxNetAdp: Successfully started.
1140[ 12.353859] VBoxPciLinuxInit
1141[ 12.353862] vboxpci: IOMMU not found (not registered)
1142[ 12.559048] usb 7-1: new full-speed USB device number 2 using uhci_hcd
1143[ 12.700106] bpfilter: Loaded bpfilter_umh pid 1474
1144[ 12.762861] Loading iSCSI transport class v2.0-870.
1145[ 12.767469] usb 7-1: New USB device found, idVendor=2833, idProduct=0001, bcdDevice= 2.00
1146[ 12.767473] usb 7-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
1147[ 12.767475] usb 7-1: Product: HID
1148[ 12.767477] usb 7-1: Manufacturer: STMicroelectronics
1149[ 12.767479] usb 7-1: SerialNumber: 00000000011a
1150[ 12.776734] hid-generic 0003:2833:0001.0006: hiddev97,hidraw5: USB HID v1.11 Device [STMicroelectronics HID] on usb-0000:00:1a.2-1/input0
1151[ 12.812125] RTL8211B Gigabit Ethernet r8169-600:00: attached PHY driver [RTL8211B Gigabit Ethernet] (mii_bus:phy_addr=r8169-600:00, irq=IGNORE)
1152[ 12.968697] r8169 0000:06:00.0 eth0: Link is Down
1153[ 12.973807] RTL8211B Gigabit Ethernet r8169-700:00: attached PHY driver [RTL8211B Gigabit Ethernet] (mii_bus:phy_addr=r8169-700:00, irq=IGNORE)
1154[ 13.131008] r8169 0000:07:00.0 eth1: Link is Down
1155[ 13.769544] media: Linux media interface: v0.10
1156[ 13.782949] videodev: Linux video capture interface: v2.00
1157[ 13.923832] MAC Address = 50:3e:aa:6c:09:3d
1158[ 13.933986] R8188EU: indicate disassoc
1159[ 13.939604] usbcore: registered new interface driver snd-usb-audio
1160[ 13.940385] uvcvideo: Found UVC 1.00 device Microsoft® LifeCam HD-5000 (045e:076d)
1161[ 13.949556] uvcvideo 1-3:1.0: Entity type for entity Extension 5 was not initialized!
1162[ 13.949559] uvcvideo 1-3:1.0: Entity type for entity Processing 4 was not initialized!
1163[ 13.949560] uvcvideo 1-3:1.0: Entity type for entity Selector 3 was not initialized!
1164[ 13.949562] uvcvideo 1-3:1.0: Entity type for entity Camera 1 was not initialized!
1165[ 13.949657] input: Microsoft® LifeCam HD-5000: Mi as /devices/pci0000:00/0000:00:1a.7/usb1/1-3/1-3:1.0/input/input32
1166[ 13.949760] usbcore: registered new interface driver uvcvideo
1167[ 13.949762] USB Video Class driver (1.1.1)
1168[ 14.067120] NET: Registered protocol family 17
1169[ 14.414345] r8169 0000:06:00.0 eth0: Link is Up - 100Mbps/Full - flow control rx/tx
1170[ 15.439226] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
1171[ 59.233200] fuse: init (API version 7.31)
1172[ 59.835732] Bluetooth: RFCOMM TTY layer initialized
1173[ 59.835736] Bluetooth: RFCOMM socket layer initialized
1174[ 59.835740] Bluetooth: RFCOMM ver 1.11
1175[ 2803.259650] perf: interrupt took too long (2505 > 2500), lowering kernel.perf_event_max_sample_rate to 79750