· 6 years ago · Jan 29, 2020, 03:46 AM
1[ 0.000000] microcode: microcode updated early to revision 0x27, date = 2019-02-26
2[ 0.000000] Initializing cgroup subsys cpuset
3[ 0.000000] Initializing cgroup subsys cpu
4[ 0.000000] Initializing cgroup subsys cpuacct
5[ 0.000000] Linux version 3.10.0-1062.9.1.el7.x86_64 (mockbuild@kbuilder.bsys.centos.org) (gcc version 4.8.5 20150623 (Red Hat 4.8.5-39) (GCC) ) #1 SMP Fri Dec 6 15:49:49 UTC 2019
6[ 0.000000] Command line: BOOT_IMAGE=/vmlinuz-3.10.0-1062.9.1.el7.x86_64 root=/dev/mapper/centos_opus-root ro crashkernel=auto rd.lvm.lv=centos_opus/root rd.lvm.lv=centos_opus/swap rhgb quiet modprobe.blacklist=nouveau LANG=en_US.UTF-8
7[ 0.000000] e820: BIOS-provided physical RAM map:
8[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009dbff] usable
9[ 0.000000] BIOS-e820: [mem 0x000000000009dc00-0x000000000009ffff] reserved
10[ 0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
11[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000c68e4fff] usable
12[ 0.000000] BIOS-e820: [mem 0x00000000c68e5000-0x00000000c68ebfff] ACPI NVS
13[ 0.000000] BIOS-e820: [mem 0x00000000c68ec000-0x00000000c6d31fff] usable
14[ 0.000000] BIOS-e820: [mem 0x00000000c6d32000-0x00000000c70eafff] reserved
15[ 0.000000] BIOS-e820: [mem 0x00000000c70eb000-0x00000000d9868fff] usable
16[ 0.000000] BIOS-e820: [mem 0x00000000d9869000-0x00000000d98f4fff] reserved
17[ 0.000000] BIOS-e820: [mem 0x00000000d98f5000-0x00000000d9914fff] ACPI data
18[ 0.000000] BIOS-e820: [mem 0x00000000d9915000-0x00000000d9a04fff] ACPI NVS
19[ 0.000000] BIOS-e820: [mem 0x00000000d9a05000-0x00000000d9ffefff] reserved
20[ 0.000000] BIOS-e820: [mem 0x00000000d9fff000-0x00000000d9ffffff] usable
21[ 0.000000] BIOS-e820: [mem 0x00000000dc000000-0x00000000de1fffff] reserved
22[ 0.000000] BIOS-e820: [mem 0x00000000f8000000-0x00000000fbffffff] reserved
23[ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
24[ 0.000000] BIOS-e820: [mem 0x00000000fed00000-0x00000000fed03fff] reserved
25[ 0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved
26[ 0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
27[ 0.000000] BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
28[ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000081fdfffff] usable
29[ 0.000000] NX (Execute Disable) protection: active
30[ 0.000000] SMBIOS 2.7 present.
31[ 0.000000] DMI: Hewlett-Packard HP EliteDesk 800 G1 TWR/18E4, BIOS L01 v02.72 12/12/2017
32[ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
33[ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
34[ 0.000000] e820: last_pfn = 0x81fe00 max_arch_pfn = 0x400000000
35[ 0.000000] MTRR default type: uncachable
36[ 0.000000] MTRR fixed ranges enabled:
37[ 0.000000] 00000-9FFFF write-back
38[ 0.000000] A0000-BFFFF uncachable
39[ 0.000000] C0000-CFFFF write-protect
40[ 0.000000] D0000-E7FFF uncachable
41[ 0.000000] E8000-FFFFF write-protect
42[ 0.000000] MTRR variable ranges enabled:
43[ 0.000000] 0 base 0000000000 mask 7800000000 write-back
44[ 0.000000] 1 base 0800000000 mask 7FE0000000 write-back
45[ 0.000000] 2 base 00E0000000 mask 7FE0000000 uncachable
46[ 0.000000] 3 base 00DC000000 mask 7FFC000000 uncachable
47[ 0.000000] 4 base 081FE00000 mask 7FFFE00000 uncachable
48[ 0.000000] 5 disabled
49[ 0.000000] 6 disabled
50[ 0.000000] 7 disabled
51[ 0.000000] 8 disabled
52[ 0.000000] 9 disabled
53[ 0.000000] PAT configuration [0-7]: WB WC UC- UC WB WP UC- UC
54[ 0.000000] original variable MTRRs
55[ 0.000000] reg 0, base: 0GB, range: 32GB, type WB
56[ 0.000000] reg 1, base: 32GB, range: 512MB, type WB
57[ 0.000000] reg 2, base: 3584MB, range: 512MB, type UC
58[ 0.000000] reg 3, base: 3520MB, range: 64MB, type UC
59[ 0.000000] reg 4, base: 33278MB, range: 2MB, type UC
60[ 0.000000] total RAM covered: 32702M
61[ 0.000000] Found optimal setting for mtrr clean up
62[ 0.000000] gran_size: 64K chunk_size: 128M num_reg: 9 lose cover RAM: 0G
63[ 0.000000] New variable MTRRs
64[ 0.000000] reg 0, base: 0GB, range: 2GB, type WB
65[ 0.000000] reg 1, base: 2GB, range: 1GB, type WB
66[ 0.000000] reg 2, base: 3GB, range: 512MB, type WB
67[ 0.000000] reg 3, base: 3520MB, range: 64MB, type UC
68[ 0.000000] reg 4, base: 4GB, range: 4GB, type WB
69[ 0.000000] reg 5, base: 8GB, range: 8GB, type WB
70[ 0.000000] reg 6, base: 16GB, range: 16GB, type WB
71[ 0.000000] reg 7, base: 32GB, range: 512MB, type WB
72[ 0.000000] reg 8, base: 33278MB, range: 2MB, type UC
73[ 0.000000] e820: update [mem 0xdc000000-0xffffffff] usable ==> reserved
74[ 0.000000] e820: last_pfn = 0xda000 max_arch_pfn = 0x400000000
75[ 0.000000] found SMP MP-table at [mem 0x000f4e80-0x000f4e8f] mapped at [ffffffffff200e80]
76[ 0.000000] Base memory trampoline at [ffffa0abc0097000] 97000 size 24576
77[ 0.000000] Using GB pages for direct mapping
78[ 0.000000] BRK [0x6dac70000, 0x6dac70fff] PGTABLE
79[ 0.000000] BRK [0x6dac71000, 0x6dac71fff] PGTABLE
80[ 0.000000] BRK [0x6dac72000, 0x6dac72fff] PGTABLE
81[ 0.000000] BRK [0x6dac73000, 0x6dac73fff] PGTABLE
82[ 0.000000] BRK [0x6dac74000, 0x6dac74fff] PGTABLE
83[ 0.000000] BRK [0x6dac75000, 0x6dac75fff] PGTABLE
84[ 0.000000] BRK [0x6dac76000, 0x6dac76fff] PGTABLE
85[ 0.000000] BRK [0x6dac77000, 0x6dac77fff] PGTABLE
86[ 0.000000] BRK [0x6dac78000, 0x6dac78fff] PGTABLE
87[ 0.000000] BRK [0x6dac79000, 0x6dac79fff] PGTABLE
88[ 0.000000] BRK [0x6dac7a000, 0x6dac7afff] PGTABLE
89[ 0.000000] RAMDISK: [mem 0x3425e000-0x36126fff]
90[ 0.000000] Early table checksum verification disabled
91[ 0.000000] ACPI: RSDP 00000000000f9810 00024 (v02 HPQOEM)
92[ 0.000000] ACPI: XSDT 00000000d98fb090 000A4 (v01 HPQOEM SLIC-BPC 20171212 AMI 00010013)
93[ 0.000000] ACPI: FACP 00000000d9909010 0010C (v05 HPQOEM SLIC-BPC 20171212 AMI 00010013)
94[ 0.000000] ACPI: DSDT 00000000d98fb1c8 0DE46 (v02 HPQOEM SLIC-BPC 00000001 INTL 20091112)
95[ 0.000000] ACPI: FACS 00000000d9a03080 00040
96[ 0.000000] ACPI: APIC 00000000d9909120 00092 (v03 HPQOEM SLIC-BPC 20171212 AMI 00010013)
97[ 0.000000] ACPI: FPDT 00000000d99091b8 00044 (v01 HPQOEM SLIC-BPC 20171212 AMI 00010013)
98[ 0.000000] ACPI: SSDT 00000000d9909200 00539 (v01 PmRef Cpu0Ist 00003000 INTL 20120711)
99[ 0.000000] ACPI: SSDT 00000000d9909740 00AD8 (v01 PmRef CpuPm 00003000 INTL 20120711)
100[ 0.000000] ACPI: SSDT 00000000d990a218 001C7 (v01 PmRef LakeTiny 00003000 INTL 20120711)
101[ 0.000000] ACPI: MCFG 00000000d990a3e0 0003C (v01 HPQOEM SLIC-BPC 20171212 MSFT 00000097)
102[ 0.000000] ACPI: HPET 00000000d990a420 00038 (v01 HPQOEM SLIC-BPC 20171212 AMI. 00000005)
103[ 0.000000] ACPI: SSDT 00000000d990a458 0036D (v01 SataRe SataTabl 00001000 INTL 20120711)
104[ 0.000000] ACPI: SSDT 00000000d990a7c8 0348C (v01 SaSsdt SaSsdt 00003000 INTL 20091112)
105[ 0.000000] ACPI: SSDT 00000000d990dc58 0668F (v01 COMPAQ WMI 00000001 MSFT 03000001)
106[ 0.000000] ACPI: SLIC 00000000d99142e8 00176 (v01 HPQOEM SLIC-BPC 00000001 00000000)
107[ 0.000000] ACPI: MSDM 00000000d9914460 00055 (v03 HPQOEM SLIC-BPC 20171212 HPQ 00010013)
108[ 0.000000] ACPI: ASF! 00000000d99144b8 000A5 (v32 INTEL HCG 00000001 TFSM 000F4240)
109[ 0.000000] ACPI: TCPA 00000000d9914560 00032 (v02 APTIO4 NAPAASF 00000001 MSFT 01000013)
110[ 0.000000] ACPI: DMAR 00000000d9914598 000B8 (v01 INTEL HSW 00000001 INTL 00000001)
111[ 0.000000] ACPI: Local APIC address 0xfee00000
112[ 0.000000] No NUMA configuration found
113[ 0.000000] Faking a node at [mem 0x0000000000000000-0x000000081fdfffff]
114[ 0.000000] NODE_DATA(0) allocated [mem 0x81fdd9000-0x81fdfffff]
115[ 0.000000] Reserving 162MB of memory at 672MB for crashkernel (System RAM: 32658MB)
116[ 0.000000] Zone ranges:
117[ 0.000000] DMA [mem 0x00001000-0x00ffffff]
118[ 0.000000] DMA32 [mem 0x01000000-0xffffffff]
119[ 0.000000] Normal [mem 0x100000000-0x81fdfffff]
120[ 0.000000] Movable zone start for each node
121[ 0.000000] Early memory node ranges
122[ 0.000000] node 0: [mem 0x00001000-0x0009cfff]
123[ 0.000000] node 0: [mem 0x00100000-0xc68e4fff]
124[ 0.000000] node 0: [mem 0xc68ec000-0xc6d31fff]
125[ 0.000000] node 0: [mem 0xc70eb000-0xd9868fff]
126[ 0.000000] node 0: [mem 0xd9fff000-0xd9ffffff]
127[ 0.000000] node 0: [mem 0x100000000-0x81fdfffff]
128[ 0.000000] Initmem setup node 0 [mem 0x00001000-0x81fdfffff]
129[ 0.000000] On node 0 totalpages: 8360518
130[ 0.000000] DMA zone: 64 pages used for memmap
131[ 0.000000] DMA zone: 21 pages reserved
132[ 0.000000] DMA zone: 3996 pages, LIFO batch:0
133[ 0.000000] DMA32 zone: 13843 pages used for memmap
134[ 0.000000] DMA32 zone: 885930 pages, LIFO batch:31
135[ 0.000000] Normal zone: 116728 pages used for memmap
136[ 0.000000] Normal zone: 7470592 pages, LIFO batch:31
137[ 0.000000] Reserving Intel graphics memory at [mem 0xdc200000-0xde1fffff]
138[ 0.000000] ACPI: PM-Timer IO Port: 0x408
139[ 0.000000] ACPI: Local APIC address 0xfee00000
140[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
141[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled)
142[ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x04] enabled)
143[ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x06] enabled)
144[ 0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x01] enabled)
145[ 0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x03] enabled)
146[ 0.000000] ACPI: LAPIC (acpi_id[0x07] lapic_id[0x05] enabled)
147[ 0.000000] ACPI: LAPIC (acpi_id[0x08] lapic_id[0x07] enabled)
148[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1])
149[ 0.000000] ACPI: IOAPIC (id[0x08] address[0xfec00000] gsi_base[0])
150[ 0.000000] IOAPIC[0]: apic_id 8, version 32, address 0xfec00000, GSI 0-23
151[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
152[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
153[ 0.000000] ACPI: IRQ0 used by override.
154[ 0.000000] ACPI: IRQ9 used by override.
155[ 0.000000] Using ACPI (MADT) for SMP configuration information
156[ 0.000000] ACPI: HPET id: 0x8086a701 base: 0xfed00000
157[ 0.000000] smpboot: Allowing 8 CPUs, 0 hotplug CPUs
158[ 0.000000] PM: Registered nosave memory: [mem 0x0009d000-0x0009dfff]
159[ 0.000000] PM: Registered nosave memory: [mem 0x0009e000-0x0009ffff]
160[ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000dffff]
161[ 0.000000] PM: Registered nosave memory: [mem 0x000e0000-0x000fffff]
162[ 0.000000] PM: Registered nosave memory: [mem 0xc68e5000-0xc68ebfff]
163[ 0.000000] PM: Registered nosave memory: [mem 0xc6d32000-0xc70eafff]
164[ 0.000000] PM: Registered nosave memory: [mem 0xd9869000-0xd98f4fff]
165[ 0.000000] PM: Registered nosave memory: [mem 0xd98f5000-0xd9914fff]
166[ 0.000000] PM: Registered nosave memory: [mem 0xd9915000-0xd9a04fff]
167[ 0.000000] PM: Registered nosave memory: [mem 0xd9a05000-0xd9ffefff]
168[ 0.000000] PM: Registered nosave memory: [mem 0xda000000-0xdbffffff]
169[ 0.000000] PM: Registered nosave memory: [mem 0xdc000000-0xde1fffff]
170[ 0.000000] PM: Registered nosave memory: [mem 0xde200000-0xf7ffffff]
171[ 0.000000] PM: Registered nosave memory: [mem 0xf8000000-0xfbffffff]
172[ 0.000000] PM: Registered nosave memory: [mem 0xfc000000-0xfebfffff]
173[ 0.000000] PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff]
174[ 0.000000] PM: Registered nosave memory: [mem 0xfec01000-0xfecfffff]
175[ 0.000000] PM: Registered nosave memory: [mem 0xfed00000-0xfed03fff]
176[ 0.000000] PM: Registered nosave memory: [mem 0xfed04000-0xfed1bfff]
177[ 0.000000] PM: Registered nosave memory: [mem 0xfed1c000-0xfed1ffff]
178[ 0.000000] PM: Registered nosave memory: [mem 0xfed20000-0xfedfffff]
179[ 0.000000] PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff]
180[ 0.000000] PM: Registered nosave memory: [mem 0xfee01000-0xfeffffff]
181[ 0.000000] PM: Registered nosave memory: [mem 0xff000000-0xffffffff]
182[ 0.000000] e820: [mem 0xde200000-0xf7ffffff] available for PCI devices
183[ 0.000000] Booting paravirtualized kernel on bare hardware
184[ 0.000000] setup_percpu: NR_CPUS:5120 nr_cpumask_bits:8 nr_cpu_ids:8 nr_node_ids:1
185[ 0.000000] PERCPU: Embedded 38 pages/cpu @ffffa0b3dfa00000 s118784 r8192 d28672 u262144
186[ 0.000000] pcpu-alloc: s118784 r8192 d28672 u262144 alloc=1*2097152
187[ 0.000000] pcpu-alloc: [0] 0 1 2 3 4 5 6 7
188[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 8229862
189[ 0.000000] Policy zone: Normal
190[ 0.000000] Kernel command line: BOOT_IMAGE=/vmlinuz-3.10.0-1062.9.1.el7.x86_64 root=/dev/mapper/centos_opus-root ro crashkernel=auto rd.lvm.lv=centos_opus/root rd.lvm.lv=centos_opus/swap rhgb quiet modprobe.blacklist=nouveau LANG=en_US.UTF-8
191[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
192[ 0.000000] x86/fpu: xstate_offset[2]: 0240, xstate_sizes[2]: 0100
193[ 0.000000] xsave: enabled xstate_bv 0x7, cntxt size 0x340 using standard form
194[ 0.000000] Memory: 5393792k/34076672k available (7764k kernel code, 634600k absent, 808404k reserved, 5967k data, 1980k init)
195[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
196[ 0.000000] x86/pti: Unmapping kernel while in userspace
197[ 0.000000] Hierarchical RCU implementation.
198[ 0.000000] RCU restricting CPUs from NR_CPUS=5120 to nr_cpu_ids=8.
199[ 0.000000] NR_IRQS:327936 nr_irqs:488 0
200[ 0.000000] Console: colour VGA+ 80x25
201[ 0.000000] console [tty0] enabled
202[ 0.000000] allocated 134217728 bytes of page_cgroup
203[ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
204[ 0.000000] hpet clockevent registered
205[ 0.000000] tsc: Fast TSC calibration using PIT
206[ 0.000000] tsc: Detected 3591.469 MHz processor
207[ 0.000023] Calibrating delay loop (skipped), value calculated using timer frequency.. 7182.93 BogoMIPS (lpj=3591469)
208[ 0.000025] pid_max: default: 32768 minimum: 301
209[ 0.000044] Security Framework initialized
210[ 0.000050] SELinux: Initializing.
211[ 0.000057] SELinux: Starting in permissive mode
212[ 0.000058] Yama: becoming mindful.
213[ 0.001605] Dentry cache hash table entries: 4194304 (order: 13, 33554432 bytes)
214[ 0.005647] Inode-cache hash table entries: 2097152 (order: 12, 16777216 bytes)
215[ 0.007323] Mount-cache hash table entries: 65536 (order: 7, 524288 bytes)
216[ 0.007348] Mountpoint-cache hash table entries: 65536 (order: 7, 524288 bytes)
217[ 0.007570] Initializing cgroup subsys memory
218[ 0.007574] Initializing cgroup subsys devices
219[ 0.007575] Initializing cgroup subsys freezer
220[ 0.007576] Initializing cgroup subsys net_cls
221[ 0.007577] Initializing cgroup subsys blkio
222[ 0.007578] Initializing cgroup subsys perf_event
223[ 0.007580] Initializing cgroup subsys hugetlb
224[ 0.007580] Initializing cgroup subsys pids
225[ 0.007581] Initializing cgroup subsys net_prio
226[ 0.007603] ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
227[ 0.007603] ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8)
228[ 0.008323] CPU0: Thermal monitoring enabled (TM1)
229[ 0.008336] Last level iTLB entries: 4KB 0, 2MB 0, 4MB 0
230[ 0.008336] Last level dTLB entries: 4KB 64, 2MB 0, 4MB 0
231[ 0.008337] tlb_flushall_shift: 6
232[ 0.008355] FEATURE SPEC_CTRL Present
233[ 0.008356] FEATURE IBPB_SUPPORT Present
234[ 0.008357] Spectre V1 : Mitigation: Load fences, usercopy/swapgs barriers and __user pointer sanitization
235[ 0.008358] Spectre V2 : Enabling Indirect Branch Prediction Barrier
236[ 0.008427] Spectre V2 : Mitigation: Full retpoline
237[ 0.008436] Speculative Store Bypass: Mitigation: Speculative Store Bypass disabled via prctl and seccomp
238[ 0.008448] MDS: Mitigation: Clear CPU buffers
239[ 0.008835] Freeing SMP alternatives: 28k freed
240[ 0.010194] ACPI: Core revision 20130517
241[ 0.016955] ACPI: All ACPI Tables successfully acquired
242[ 0.017139] ftrace: allocating 29560 entries in 116 pages
243[ 0.034706] DMAR: Host address width 39
244[ 0.034707] DMAR: DRHD base: 0x000000fed90000 flags: 0x0
245[ 0.034713] DMAR: dmar0: reg_base_addr fed90000 ver 1:0 cap c0000020660462 ecap f0101a
246[ 0.034714] DMAR: DRHD base: 0x000000fed91000 flags: 0x1
247[ 0.034718] DMAR: dmar1: reg_base_addr fed91000 ver 1:0 cap d2008020660462 ecap f010da
248[ 0.034719] DMAR: RMRR base: 0x000000d988a000 end: 0x000000d9896fff
249[ 0.034720] DMAR: RMRR base: 0x000000dc000000 end: 0x000000de1fffff
250[ 0.034722] DMAR-IR: IOAPIC id 8 under DRHD base 0xfed91000 IOMMU 1
251[ 0.034723] DMAR-IR: HPET id 0 under DRHD base 0xfed91000
252[ 0.034724] DMAR-IR: Queued invalidation will be enabled to support x2apic and Intr-remapping.
253[ 0.034898] DMAR-IR: Enabled IRQ remapping in x2apic mode
254[ 0.034899] Enabling x2apic
255[ 0.034900] Enabled x2apic
256[ 0.034905] Switched APIC routing to cluster x2apic.
257[ 0.035339] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
258[ 0.045340] smpboot: CPU0: Intel(R) Core(TM) i7-4790 CPU @ 3.60GHz (fam: 06, model: 3c, stepping: 03)
259[ 0.045351] TSC deadline timer enabled
260[ 0.045385] Performance Events: PEBS fmt2+, Haswell events, 16-deep LBR, full-width counters, Intel PMU driver.
261[ 0.045400] ... version: 3
262[ 0.045401] ... bit width: 48
263[ 0.045402] ... generic registers: 4
264[ 0.045403] ... value mask: 0000ffffffffffff
265[ 0.045403] ... max period: 00007fffffffffff
266[ 0.045404] ... fixed-purpose events: 3
267[ 0.045405] ... event mask: 000000070000000f
268[ 0.048668] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
269[ 0.046322] smpboot: Booting Node 0, Processors #1 #2 #3 #4
270[ 0.054663] MDS CPU bug present and SMT on, data leak possible. See https://www.kernel.org/doc/html/latest/admin-guide/hw-vuln/mds.html for more details.
271[ 0.054718] #5 #6 #7 OK
272[ 0.058367] Brought up 8 CPUs
273[ 0.058369] smpboot: Max logical packages: 1
274[ 0.058370] smpboot: Total of 8 processors activated (57463.50 BogoMIPS)
275[ 0.149323] node 0 initialised, 6809969 pages in 84ms
276[ 0.149436] devtmpfs: initialized
277[ 0.149487] x86/mm: Memory block size: 128MB
278[ 0.152403] EVM: security.selinux
279[ 0.152404] EVM: security.ima
280[ 0.152405] EVM: security.capability
281[ 0.152470] PM: Registering ACPI NVS region [mem 0xc68e5000-0xc68ebfff] (28672 bytes)
282[ 0.152471] PM: Registering ACPI NVS region [mem 0xd9915000-0xd9a04fff] (983040 bytes)
283[ 0.153331] atomic64 test passed for x86-64 platform with CX8 and with SSE
284[ 0.153333] pinctrl core: initialized pinctrl subsystem
285[ 0.153375] RTC time: 16:31:02, date: 01/25/20
286[ 0.153429] NET: Registered protocol family 16
287[ 0.153578] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
288[ 0.153579] ACPI: bus type PCI registered
289[ 0.153580] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
290[ 0.153629] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000)
291[ 0.153631] PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in E820
292[ 0.153639] PCI: Using configuration type 1 for base access
293[ 0.153659] core: PMU erratum BJ122, BV98, HSD29 worked around, HT is on
294[ 0.157552] ACPI: Added _OSI(Module Device)
295[ 0.157554] ACPI: Added _OSI(Processor Device)
296[ 0.157555] ACPI: Added _OSI(3.0 _SCP Extensions)
297[ 0.157556] ACPI: Added _OSI(Processor Aggregator Device)
298[ 0.157557] ACPI: Added _OSI(Linux-Dell-Video)
299[ 0.158949] ACPI: EC: Look up EC in DSDT
300[ 0.160468] ACPI: Executed 1 blocks of module-level executable AML code
301[ 0.162729] ACPI: [Firmware Bug]: BIOS _OSI(Linux) query ignored
302[ 0.163213] ACPI: Dynamic OEM Table Load:
303[ 0.163218] ACPI: SSDT ffffa0ad3426fc00 003D3 (v01 PmRef Cpu0Cst 00003001 INTL 20120711)
304[ 0.163719] ACPI: Dynamic OEM Table Load:
305[ 0.163723] ACPI: SSDT ffffa0b3df5f2000 005AA (v01 PmRef ApIst 00003000 INTL 20120711)
306[ 0.164164] ACPI: Dynamic OEM Table Load:
307[ 0.164167] ACPI: SSDT ffffa0ad3422e400 00119 (v01 PmRef ApCst 00003000 INTL 20120711)
308[ 0.165313] ACPI: Interpreter enabled
309[ 0.165331] ACPI: (supports S0 S3 S4 S5)
310[ 0.165332] ACPI: Using IOAPIC for interrupt routing
311[ 0.165350] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
312[ 0.165387] ACPI: Enabled 7 GPEs in block 00 to 3F
313[ 0.171054] ACPI: Power Resource [FN00] (off)
314[ 0.171100] ACPI: Power Resource [FN01] (off)
315[ 0.171142] ACPI: Power Resource [FN02] (off)
316[ 0.171183] ACPI: Power Resource [FN03] (off)
317[ 0.171225] ACPI: Power Resource [FN04] (off)
318[ 0.171796] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3e])
319[ 0.171801] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
320[ 0.171954] acpi PNP0A08:00: _OSC: platform does not support [PCIeHotplug SHPCHotplug PME]
321[ 0.172035] acpi PNP0A08:00: _OSC: OS now controls [AER PCIeCapability]
322[ 0.172036] acpi PNP0A08:00: FADT indicates ASPM is unsupported, using BIOS configuration
323[ 0.172282] PCI host bridge to bus 0000:00
324[ 0.172284] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window]
325[ 0.172285] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window]
326[ 0.172287] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
327[ 0.172288] pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000d3fff window]
328[ 0.172289] pci_bus 0000:00: root bus resource [mem 0x000d4000-0x000d7fff window]
329[ 0.172291] pci_bus 0000:00: root bus resource [mem 0x000d8000-0x000dbfff window]
330[ 0.172292] pci_bus 0000:00: root bus resource [mem 0x000dc000-0x000dffff window]
331[ 0.172293] pci_bus 0000:00: root bus resource [mem 0x000e0000-0x000e3fff window]
332[ 0.172294] pci_bus 0000:00: root bus resource [mem 0x000e4000-0x000e7fff window]
333[ 0.172296] pci_bus 0000:00: root bus resource [mem 0xde200000-0xfeafffff window]
334[ 0.172297] pci_bus 0000:00: root bus resource [bus 00-3e]
335[ 0.172303] pci 0000:00:00.0: [8086:0c00] type 00 class 0x060000
336[ 0.172374] pci 0000:00:02.0: [8086:0412] type 00 class 0x030000
337[ 0.172381] pci 0000:00:02.0: reg 0x10: [mem 0xf7800000-0xf7bfffff 64bit]
338[ 0.172386] pci 0000:00:02.0: reg 0x18: [mem 0xe0000000-0xefffffff 64bit pref]
339[ 0.172389] pci 0000:00:02.0: reg 0x20: [io 0xf000-0xf03f]
340[ 0.172442] pci 0000:00:03.0: [8086:0c0c] type 00 class 0x040300
341[ 0.172448] pci 0000:00:03.0: reg 0x10: [mem 0xf7c34000-0xf7c37fff 64bit]
342[ 0.172524] pci 0000:00:14.0: [8086:8c31] type 00 class 0x0c0330
343[ 0.172539] pci 0000:00:14.0: reg 0x10: [mem 0xf7c20000-0xf7c2ffff 64bit]
344[ 0.172590] pci 0000:00:14.0: PME# supported from D3hot D3cold
345[ 0.172617] pci 0000:00:14.0: System wakeup disabled by ACPI
346[ 0.172647] pci 0000:00:16.0: [8086:8c3a] type 00 class 0x078000
347[ 0.172662] pci 0000:00:16.0: reg 0x10: [mem 0xf7c40000-0xf7c4000f 64bit]
348[ 0.172716] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
349[ 0.172769] pci 0000:00:16.3: [8086:8c3d] type 00 class 0x070002
350[ 0.172781] pci 0000:00:16.3: reg 0x10: [io 0xf0e0-0xf0e7]
351[ 0.172789] pci 0000:00:16.3: reg 0x14: [mem 0xf7c3e000-0xf7c3efff]
352[ 0.172892] pci 0000:00:19.0: [8086:153a] type 00 class 0x020000
353[ 0.172904] pci 0000:00:19.0: reg 0x10: [mem 0xf7c00000-0xf7c1ffff]
354[ 0.172912] pci 0000:00:19.0: reg 0x14: [mem 0xf7c3d000-0xf7c3dfff]
355[ 0.172919] pci 0000:00:19.0: reg 0x18: [io 0xf080-0xf09f]
356[ 0.172968] pci 0000:00:19.0: PME# supported from D0 D3hot D3cold
357[ 0.172996] pci 0000:00:19.0: System wakeup disabled by ACPI
358[ 0.173027] pci 0000:00:1a.0: [8086:8c2d] type 00 class 0x0c0320
359[ 0.173041] pci 0000:00:1a.0: reg 0x10: [mem 0xf7c3c000-0xf7c3c3ff]
360[ 0.173113] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
361[ 0.173156] pci 0000:00:1a.0: System wakeup disabled by ACPI
362[ 0.173189] pci 0000:00:1b.0: [8086:8c20] type 00 class 0x040300
363[ 0.173203] pci 0000:00:1b.0: reg 0x10: [mem 0xf7c30000-0xf7c33fff 64bit]
364[ 0.173262] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
365[ 0.173288] pci 0000:00:1b.0: System wakeup disabled by ACPI
366[ 0.173321] pci 0000:00:1d.0: [8086:8c26] type 00 class 0x0c0320
367[ 0.173338] pci 0000:00:1d.0: reg 0x10: [mem 0xf7c3b000-0xf7c3b3ff]
368[ 0.173411] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
369[ 0.173454] pci 0000:00:1d.0: System wakeup disabled by ACPI
370[ 0.173486] pci 0000:00:1f.0: [8086:8c4e] type 00 class 0x060100
371[ 0.173622] pci 0000:00:1f.2: [8086:8c02] type 00 class 0x010601
372[ 0.173634] pci 0000:00:1f.2: reg 0x10: [io 0xf0d0-0xf0d7]
373[ 0.173641] pci 0000:00:1f.2: reg 0x14: [io 0xf0c0-0xf0c3]
374[ 0.173647] pci 0000:00:1f.2: reg 0x18: [io 0xf0b0-0xf0b7]
375[ 0.173654] pci 0000:00:1f.2: reg 0x1c: [io 0xf0a0-0xf0a3]
376[ 0.173661] pci 0000:00:1f.2: reg 0x20: [io 0xf060-0xf07f]
377[ 0.173668] pci 0000:00:1f.2: reg 0x24: [mem 0xf7c3a000-0xf7c3a7ff]
378[ 0.173697] pci 0000:00:1f.2: PME# supported from D3hot
379[ 0.173748] pci 0000:00:1f.3: [8086:8c22] type 00 class 0x0c0500
380[ 0.173761] pci 0000:00:1f.3: reg 0x10: [mem 0xf7c39000-0xf7c390ff 64bit]
381[ 0.173778] pci 0000:00:1f.3: reg 0x20: [io 0xf040-0xf05f]
382[ 0.174527] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 10 *11 12 14 15)
383[ 0.174568] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
384[ 0.174603] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 *10 11 12 14 15)
385[ 0.174642] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 *10 11 12 14 15)
386[ 0.174683] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 *5 6 10 11 12 14 15)
387[ 0.174723] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
388[ 0.174762] ACPI: PCI Interrupt Link [LNKG] (IRQs *3 4 5 6 10 11 12 14 15)
389[ 0.174803] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 10 *11 12 14 15)
390[ 0.175071] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
391[ 0.175073] vgaarb: loaded
392[ 0.175074] vgaarb: bridge control possible 0000:00:02.0
393[ 0.175121] SCSI subsystem initialized
394[ 0.175140] ACPI: bus type USB registered
395[ 0.175150] usbcore: registered new interface driver usbfs
396[ 0.175156] usbcore: registered new interface driver hub
397[ 0.175173] usbcore: registered new device driver usb
398[ 0.175224] EDAC MC: Ver: 3.0.0
399[ 0.175301] PCI: Using ACPI for IRQ routing
400[ 0.176567] PCI: pci_cache_line_size set to 64 bytes
401[ 0.176595] e820: reserve RAM buffer [mem 0x0009dc00-0x0009ffff]
402[ 0.176596] e820: reserve RAM buffer [mem 0xc68e5000-0xc7ffffff]
403[ 0.176597] e820: reserve RAM buffer [mem 0xc6d32000-0xc7ffffff]
404[ 0.176598] e820: reserve RAM buffer [mem 0xd9869000-0xdbffffff]
405[ 0.176600] e820: reserve RAM buffer [mem 0xda000000-0xdbffffff]
406[ 0.176601] e820: reserve RAM buffer [mem 0x81fe00000-0x81fffffff]
407[ 0.176680] NetLabel: Initializing
408[ 0.176681] NetLabel: domain hash size = 128
409[ 0.176682] NetLabel: protocols = UNLABELED CIPSOv4
410[ 0.176693] NetLabel: unlabeled traffic allowed by default
411[ 0.176751] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
412[ 0.176755] hpet0: 8 comparators, 64-bit 14.318180 MHz counter
413[ 0.178772] amd_nb: Cannot enumerate AMD northbridges
414[ 0.178786] Switched to clocksource hpet
415[ 0.181957] pnp: PnP ACPI init
416[ 0.181965] ACPI: bus type PNP registered
417[ 0.182003] system 00:00: [mem 0xfed40000-0xfed44fff] has been reserved
418[ 0.182006] system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)
419[ 0.182065] pnp 00:01: can't evaluate _CRS: 12311
420[ 0.182137] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
421[ 0.182162] pnp 00:02: Plug and Play ACPI device, IDs PNP0b00 (active)
422[ 0.182189] system 00:03: [io 0x1854-0x1857] has been reserved
423[ 0.182191] system 00:03: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)
424[ 0.182269] system 00:04: [io 0x0a20-0x0a3f] has been reserved
425[ 0.182271] system 00:04: [io 0x0a10-0x0a1f] has been reserved
426[ 0.182273] system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active)
427[ 0.182297] pnp 00:05: Plug and Play ACPI device, IDs PNP0303 PNP030b (active)
428[ 0.182331] pnp 00:06: Plug and Play ACPI device, IDs PNP0f03 PNP0f13 (active)
429[ 0.182360] system 00:07: [io 0x04d0-0x04d1] has been reserved
430[ 0.182362] system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active)
431[ 0.182489] pnp 00:08: [dma 0 disabled]
432[ 0.182552] pnp 00:08: Plug and Play ACPI device, IDs PNP0501 (active)
433[ 0.182774] pnp 00:09: [dma 1]
434[ 0.182854] pnp 00:09: Plug and Play ACPI device, IDs PNP0401 (active)
435[ 0.182884] pnp 00:0a: Plug and Play ACPI device, IDs IFX0102 PNP0c31 (active)
436[ 0.183180] system 00:0b: [mem 0xfed1c000-0xfed1ffff] has been reserved
437[ 0.183181] system 00:0b: [mem 0xfed10000-0xfed17fff] has been reserved
438[ 0.183183] system 00:0b: [mem 0xfed18000-0xfed18fff] has been reserved
439[ 0.183184] system 00:0b: [mem 0xfed19000-0xfed19fff] has been reserved
440[ 0.183186] system 00:0b: [mem 0xf8000000-0xfbffffff] has been reserved
441[ 0.183187] system 00:0b: [mem 0xfed20000-0xfed3ffff] has been reserved
442[ 0.183189] system 00:0b: [mem 0xfed90000-0xfed93fff] could not be reserved
443[ 0.183190] system 00:0b: [mem 0xfed45000-0xfed8ffff] has been reserved
444[ 0.183192] system 00:0b: [mem 0xff000000-0xffffffff] has been reserved
445[ 0.183193] system 00:0b: [mem 0xfee00000-0xfeefffff] could not be reserved
446[ 0.183195] system 00:0b: [mem 0xf7fdf000-0xf7fdffff] has been reserved
447[ 0.183196] system 00:0b: [mem 0xf7fe0000-0xf7feffff] has been reserved
448[ 0.183198] system 00:0b: Plug and Play ACPI device, IDs PNP0c02 (active)
449[ 0.183383] pnp: PnP ACPI: found 12 devices
450[ 0.183384] ACPI: bus type PNP unregistered
451[ 0.190920] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window]
452[ 0.190922] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window]
453[ 0.190923] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
454[ 0.190925] pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000d3fff window]
455[ 0.190926] pci_bus 0000:00: resource 8 [mem 0x000d4000-0x000d7fff window]
456[ 0.190927] pci_bus 0000:00: resource 9 [mem 0x000d8000-0x000dbfff window]
457[ 0.190929] pci_bus 0000:00: resource 10 [mem 0x000dc000-0x000dffff window]
458[ 0.190930] pci_bus 0000:00: resource 11 [mem 0x000e0000-0x000e3fff window]
459[ 0.190931] pci_bus 0000:00: resource 12 [mem 0x000e4000-0x000e7fff window]
460[ 0.190933] pci_bus 0000:00: resource 13 [mem 0xde200000-0xfeafffff window]
461[ 0.190951] NET: Registered protocol family 2
462[ 0.191143] TCP established hash table entries: 262144 (order: 9, 2097152 bytes)
463[ 0.191379] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
464[ 0.191473] TCP: Hash tables configured (established 262144 bind 65536)
465[ 0.191485] TCP: reno registered
466[ 0.191509] UDP hash table entries: 16384 (order: 7, 524288 bytes)
467[ 0.191580] UDP-Lite hash table entries: 16384 (order: 7, 524288 bytes)
468[ 0.191660] NET: Registered protocol family 1
469[ 0.191672] pci 0000:00:02.0: Boot video device
470[ 0.217869] PCI: CLS 64 bytes, default 64
471[ 0.217895] Unpacking initramfs...
472[ 0.496720] Freeing initrd memory: 31524k freed
473[ 0.499018] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
474[ 0.499021] software IO TLB [mem 0xd5869000-0xd9869000] (64MB) mapped at [ffffa0ac95869000-ffffa0ac99868fff]
475[ 0.499082] RAPL PMU: API unit is 2^-32 Joules, 4 fixed counters, 655360 ms ovfl timer
476[ 0.499084] RAPL PMU: hw unit of domain pp0-core 2^-14 Joules
477[ 0.499084] RAPL PMU: hw unit of domain package 2^-14 Joules
478[ 0.499085] RAPL PMU: hw unit of domain dram 2^-14 Joules
479[ 0.499086] RAPL PMU: hw unit of domain pp1-gpu 2^-14 Joules
480[ 0.499840] sha1_ssse3: Using AVX2 optimized SHA-1 implementation
481[ 0.499880] sha256_ssse3: Using AVX2 optimized SHA-256 implementation
482[ 0.500123] futex hash table entries: 2048 (order: 5, 131072 bytes)
483[ 0.500142] Initialise system trusted keyring
484[ 0.500154] audit: initializing netlink socket (disabled)
485[ 0.500161] type=2000 audit(1579969862.489:1): initialized
486[ 0.517523] HugeTLB registered 1 GB page size, pre-allocated 0 pages
487[ 0.517524] HugeTLB registered 2 MB page size, pre-allocated 0 pages
488[ 0.518412] zpool: loaded
489[ 0.518414] zbud: loaded
490[ 0.518623] VFS: Disk quotas dquot_6.5.2
491[ 0.518642] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
492[ 0.518775] msgmni has been set to 32768
493[ 0.518824] Key type big_key registered
494[ 0.518825] SELinux: Registering netfilter hooks
495[ 0.519352] NET: Registered protocol family 38
496[ 0.519357] Key type asymmetric registered
497[ 0.519359] Asymmetric key parser 'x509' registered
498[ 0.519382] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 248)
499[ 0.519410] io scheduler noop registered
500[ 0.519413] io scheduler deadline registered (default)
501[ 0.519430] io scheduler cfq registered
502[ 0.519432] io scheduler mq-deadline registered
503[ 0.519434] io scheduler kyber registered
504[ 0.519516] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
505[ 0.519520] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
506[ 0.519528] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
507[ 0.519583] intel_idle: MWAIT substates: 0x42120
508[ 0.519584] intel_idle: v0.4.1 model 0x3C
509[ 0.519623] intel_idle: lapic_timer_reliable_states 0xffffffff
510[ 0.519697] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input0
511[ 0.519701] ACPI: Power Button [PWRB]
512[ 0.519725] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
513[ 0.519727] ACPI: Power Button [PWRF]
514[ 0.519951] ACPI: Requesting acpi_cpufreq
515[ 0.520348] thermal LNXTHERM:00: registered as thermal_zone0
516[ 0.520350] ACPI: Thermal Zone [TZ00] (28 C)
517[ 0.520485] thermal LNXTHERM:01: registered as thermal_zone1
518[ 0.520486] ACPI: Thermal Zone [TZ01] (30 C)
519[ 0.520520] GHES: HEST is not enabled!
520[ 0.520568] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
521[ 0.541110] 00:08: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
522[ 0.561670] 0000:00:16.3: ttyS1 at I/O 0xf0e0 (irq = 19) is a 16550A
523[ 0.561899] Non-volatile memory driver v1.3
524[ 0.561924] Linux agpgart interface v0.103
525[ 0.565649] tpm_tis 00:0a: 1.2 TPM (device-id 0xB, rev-id 16)
526[ 0.581825] tpm tpm0: TPM is disabled/deactivated (0x7)
527[ 0.585097] crash memory driver: version 1.1
528[ 0.585153] rdac: device handler registered
529[ 0.585181] hp_sw: device handler registered
530[ 0.585183] emc: device handler registered
531[ 0.585213] alua: device handler registered
532[ 0.585251] libphy: Fixed MDIO Bus: probed
533[ 0.585301] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
534[ 0.585305] ehci-pci: EHCI PCI platform driver
535[ 0.585400] ehci-pci 0000:00:1a.0: EHCI Host Controller
536[ 0.585441] ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1
537[ 0.585456] ehci-pci 0000:00:1a.0: debug port 2
538[ 0.589361] ehci-pci 0000:00:1a.0: cache line size of 64 is not supported
539[ 0.589371] ehci-pci 0000:00:1a.0: irq 16, io mem 0xf7c3c000
540[ 0.594825] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00
541[ 0.594850] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 3.10
542[ 0.594851] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
543[ 0.594853] usb usb1: Product: EHCI Host Controller
544[ 0.594854] usb usb1: Manufacturer: Linux 3.10.0-1062.9.1.el7.x86_64 ehci_hcd
545[ 0.594855] usb usb1: SerialNumber: 0000:00:1a.0
546[ 0.594939] hub 1-0:1.0: USB hub found
547[ 0.594943] hub 1-0:1.0: 3 ports detected
548[ 0.595103] ehci-pci 0000:00:1d.0: EHCI Host Controller
549[ 0.595137] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 2
550[ 0.595151] ehci-pci 0000:00:1d.0: debug port 2
551[ 0.599034] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported
552[ 0.599043] ehci-pci 0000:00:1d.0: irq 23, io mem 0xf7c3b000
553[ 0.604826] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
554[ 0.604845] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 3.10
555[ 0.604846] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
556[ 0.604847] usb usb2: Product: EHCI Host Controller
557[ 0.604849] usb usb2: Manufacturer: Linux 3.10.0-1062.9.1.el7.x86_64 ehci_hcd
558[ 0.604850] usb usb2: SerialNumber: 0000:00:1d.0
559[ 0.604925] hub 2-0:1.0: USB hub found
560[ 0.604929] hub 2-0:1.0: 3 ports detected
561[ 0.605019] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
562[ 0.605023] ohci-pci: OHCI PCI platform driver
563[ 0.605030] uhci_hcd: USB Universal Host Controller Interface driver
564[ 0.605106] xhci_hcd 0000:00:14.0: xHCI Host Controller
565[ 0.605138] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 3
566[ 0.606209] xhci_hcd 0000:00:14.0: hcc params 0x200077c1 hci version 0x100 quirks 0x0000000000009810
567[ 0.606214] xhci_hcd 0000:00:14.0: cache line size of 64 is not supported
568[ 0.606238] xhci_hcd 0000:00:14.0: irq 26 for MSI/MSI-X
569[ 0.606328] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 3.10
570[ 0.606329] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
571[ 0.606330] usb usb3: Product: xHCI Host Controller
572[ 0.606332] usb usb3: Manufacturer: Linux 3.10.0-1062.9.1.el7.x86_64 xhci-hcd
573[ 0.606333] usb usb3: SerialNumber: 0000:00:14.0
574[ 0.606407] hub 3-0:1.0: USB hub found
575[ 0.606427] hub 3-0:1.0: 15 ports detected
576[ 0.608436] xhci_hcd 0000:00:14.0: xHCI Host Controller
577[ 0.608469] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 4
578[ 0.608472] xhci_hcd 0000:00:14.0: Host supports USB 3.0 SuperSpeed
579[ 0.608504] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 3.10
580[ 0.608505] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
581[ 0.608507] usb usb4: Product: xHCI Host Controller
582[ 0.608508] usb usb4: Manufacturer: Linux 3.10.0-1062.9.1.el7.x86_64 xhci-hcd
583[ 0.608509] usb usb4: SerialNumber: 0000:00:14.0
584[ 0.608581] hub 4-0:1.0: USB hub found
585[ 0.608596] hub 4-0:1.0: 6 ports detected
586[ 0.608892] usb: port power management may be unreliable
587[ 0.609078] usbcore: registered new interface driver usbserial_generic
588[ 0.609083] usbserial: USB Serial support registered for generic
589[ 0.609127] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12
590[ 0.612060] serio: i8042 KBD port at 0x60,0x64 irq 1
591[ 0.612063] serio: i8042 AUX port at 0x60,0x64 irq 12
592[ 0.612133] mousedev: PS/2 mouse device common for all mice
593[ 0.612255] rtc_cmos 00:02: RTC can wake from S4
594[ 0.612363] rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0
595[ 0.612393] rtc_cmos 00:02: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
596[ 0.612430] intel_pstate: Intel P-state driver initializing
597[ 0.613165] cpuidle: using governor menu
598[ 0.614111] hidraw: raw HID events driver (C) Jiri Kosina
599[ 0.614419] usbcore: registered new interface driver usbhid
600[ 0.614423] usbhid: USB HID core driver
601[ 0.614620] drop_monitor: Initializing network drop monitor service
602[ 0.614798] TCP: cubic registered
603[ 0.614810] Initializing XFRM netlink socket
604[ 0.615114] NET: Registered protocol family 10
605[ 0.615582] NET: Registered protocol family 17
606[ 0.615600] mpls_gso: MPLS GSO support
607[ 0.616231] mce: Using 9 MCE banks
608[ 0.616326] microcode: sig=0x306c3, pf=0x2, revision=0x27
609[ 0.616526] microcode: Microcode Update Driver: v2.01 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
610[ 0.616866] PM: Hibernation image not present or could not be loaded.
611[ 0.616874] Loading compiled-in X.509 certificates
612[ 0.616929] Loaded X.509 cert 'CentOS Linux kpatch signing key: ea0413152cde1d98ebdca3fe6f0230904c9ef717'
613[ 0.616971] Loaded X.509 cert 'CentOS Linux Driver update signing key: 7f421ee0ab69461574bb358861dbe77762a4201b'
614[ 0.618368] Loaded X.509 cert 'CentOS Linux kernel signing key: 9e88c8dfd452918c8321f51ebbc7924b498bbd5a'
615[ 0.618415] registered taskstats version 1
616[ 0.625064] Key type trusted registered
617[ 0.630322] Key type encrypted registered
618[ 0.633798] IMA: No TPM chip found, activating TPM-bypass! (rc=7)
619[ 0.634451] Magic number: 4:24:541
620[ 0.634711] rtc_cmos 00:02: setting system clock to 2020-01-25 16:31:03 UTC (1579969863)
621[ 0.636490] Freeing unused kernel memory: 1980k freed
622[ 0.636825] Write protecting the kernel read-only data: 12288k
623[ 0.638568] Freeing unused kernel memory: 416k freed
624[ 0.640482] Freeing unused kernel memory: 552k freed
625[ 0.644973] random: systemd: uninitialized urandom read (16 bytes read)
626[ 0.645362] random: systemd: uninitialized urandom read (16 bytes read)
627[ 0.645381] random: systemd: uninitialized urandom read (16 bytes read)
628[ 0.646464] systemd[1]: systemd 219 running in system mode. (+PAM +AUDIT +SELINUX +IMA -APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 -SECCOMP +BLKID +ELFUTILS +KMOD +IDN)
629[ 0.646646] systemd[1]: Detected architecture x86-64.
630[ 0.646651] systemd[1]: Running in initial RAM disk.
631[ 0.646687] systemd[1]: Set hostname to <opus>.
632[ 0.684018] random: systemd: uninitialized urandom read (16 bytes read)
633[ 0.684033] random: systemd: uninitialized urandom read (16 bytes read)
634[ 0.684052] random: systemd: uninitialized urandom read (16 bytes read)
635[ 0.684085] random: systemd: uninitialized urandom read (16 bytes read)
636[ 0.684489] random: systemd: uninitialized urandom read (16 bytes read)
637[ 0.684588] random: systemd: uninitialized urandom read (16 bytes read)
638[ 0.684778] random: systemd: uninitialized urandom read (16 bytes read)
639[ 0.686858] systemd[1]: [/run/systemd/generator/dev-mapper-centos_opus\x2droot.device.d/timeout.conf:3] Unknown lvalue 'JobRunningTimeoutSec' in section 'Unit'
640[ 0.687416] systemd[1]: Created slice Root Slice.
641[ 0.687479] systemd[1]: Listening on udev Control Socket.
642[ 0.687509] systemd[1]: Listening on udev Kernel Socket.
643[ 0.687568] systemd[1]: Created slice System Slice.
644[ 0.687585] systemd[1]: Reached target Slices.
645[ 0.687599] systemd[1]: Reached target Timers.
646[ 0.687612] systemd[1]: Reached target Swap.
647[ 0.687621] systemd[1]: Reached target Local File Systems.
648[ 0.687668] systemd[1]: Listening on Journal Socket.
649[ 0.688010] systemd[1]: Starting Setup Virtual Console...
650[ 0.688382] systemd[1]: Starting Apply Kernel Variables...
651[ 0.688402] systemd[1]: Reached target Sockets.
652[ 0.688770] systemd[1]: Starting Create list of required static device nodes for the current kernel...
653[ 0.689113] systemd[1]: Starting Journal Service...
654[ 0.689659] systemd[1]: Starting dracut cmdline hook...
655[ 0.690136] systemd[1]: Started Apply Kernel Variables.
656[ 0.690403] systemd[1]: Started Create list of required static device nodes for the current kernel.
657[ 0.690938] systemd[1]: Starting Create Static Device Nodes in /dev...
658[ 0.693243] systemd[1]: Started Create Static Device Nodes in /dev.
659[ 0.707539] systemd[1]: Started Journal Service.
660[ 0.782789] device-mapper: uevent: version 1.0.3
661[ 0.782855] device-mapper: ioctl: 4.37.1-ioctl (2018-04-03) initialised: dm-devel@redhat.com
662[ 0.830657] pps_core: LinuxPPS API ver. 1 registered
663[ 0.830660] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
664[ 0.832886] PTP clock support registered
665[ 0.853735] libata version 3.00 loaded.
666[ 0.864307] e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k
667[ 0.864310] e1000e: Copyright(c) 1999 - 2015 Intel Corporation.
668[ 0.864484] e1000e 0000:00:19.0: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode
669[ 0.864516] e1000e 0000:00:19.0: irq 27 for MSI/MSI-X
670[ 0.916002] usb 1-1: new high-speed USB device number 2 using ehci-pci
671[ 0.922849] usb 2-1: new high-speed USB device number 2 using ehci-pci
672[ 0.922867] usb 3-3: new full-speed USB device number 2 using xhci_hcd
673[ 0.953553] e1000e 0000:00:19.0 (unregistered net_device) (uninitialized): registered PHC clock
674[ 1.032671] e1000e 0000:00:19.0 eth0: (PCI Express:2.5GT/s:Width x1) 50:65:f3:27:d8:7e
675[ 1.032674] e1000e 0000:00:19.0 eth0: Intel(R) PRO/1000 Network Connection
676[ 1.032734] e1000e 0000:00:19.0 eth0: MAC: 11, PHY: 12, PBA No: FFFFFF-0FF
677[ 1.032785] ahci 0000:00:1f.2: version 3.0
678[ 1.032918] ahci 0000:00:1f.2: irq 28 for MSI/MSI-X
679[ 1.032949] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 5 ports 6 Gbps 0x5 impl SATA mode
680[ 1.032951] ahci 0000:00:1f.2: flags: 64bit ncq pm led clo pio slum part ems apst
681[ 1.035403] scsi host0: ahci
682[ 1.035680] scsi host1: ahci
683[ 1.035778] scsi host2: ahci
684[ 1.035833] scsi host3: ahci
685[ 1.036007] scsi host4: ahci
686[ 1.036042] ata1: SATA max UDMA/133 abar m2048@0xf7c3a000 port 0xf7c3a100 irq 28
687[ 1.036043] ata2: DUMMY
688[ 1.036045] ata3: SATA max UDMA/133 abar m2048@0xf7c3a000 port 0xf7c3a200 irq 28
689[ 1.036046] ata4: DUMMY
690[ 1.036046] ata5: DUMMY
691[ 1.042190] usb 1-1: New USB device found, idVendor=8087, idProduct=8008, bcdDevice= 0.04
692[ 1.042192] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
693[ 1.042341] hub 1-1:1.0: USB hub found
694[ 1.042437] hub 1-1:1.0: 6 ports detected
695[ 1.049187] usb 2-1: New USB device found, idVendor=8087, idProduct=8000, bcdDevice= 0.04
696[ 1.049190] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
697[ 1.049339] hub 2-1:1.0: USB hub found
698[ 1.049436] hub 2-1:1.0: 8 ports detected
699[ 1.072094] usb 3-3: New USB device found, idVendor=046d, idProduct=c07c, bcdDevice=85.00
700[ 1.072097] usb 3-3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
701[ 1.072099] usb 3-3: Product: G700s Rechargeable Gaming Mouse
702[ 1.072101] usb 3-3: Manufacturer: Logitech
703[ 1.072102] usb 3-3: SerialNumber: E690A3950007
704[ 1.086143] input: Logitech G700s Rechargeable Gaming Mouse as /devices/pci0000:00/0000:00:14.0/usb3/3-3/3-3:1.0/input/input2
705[ 1.086354] hid-generic 0003:046D:C07C.0001: input,hidraw0: USB HID v1.11 Mouse [Logitech G700s Rechargeable Gaming Mouse] on usb-0000:00:14.0-3/input0
706[ 1.088048] tmpfs: Bad mount option huge
707[ 1.095860] [drm] Unable to create a private tmpfs mount, hugepage support will be disabled(-22).
708[ 1.095955] [drm] Replacing VGA console driver
709[ 1.096685] Console: switching to colour dummy device 80x25
710[ 1.096717] i915 0000:00:02.0: irq 29 for MSI/MSI-X
711[ 1.097321] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
712[ 1.097322] [drm] Driver supports precise vblank timestamp query.
713[ 1.097528] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
714[ 1.098370] input: Logitech G700s Rechargeable Gaming Mouse as /devices/pci0000:00/0000:00:14.0/usb3/3-3/3-3:1.1/input/input3
715[ 1.124527] [drm] Initialized i915 1.6.0 20181204 for 0000:00:02.0 on minor 0
716[ 1.124802] [Firmware Bug]: Duplicate ACPI video bus devices for the same VGA controller, please try module parameter "video.allow_duplicates=1"if the current driver doesn't work.
717[ 1.148961] hid-generic 0003:046D:C07C.0002: input,hiddev0,hidraw1: USB HID v1.11 Keyboard [Logitech G700s Rechargeable Gaming Mouse] on usb-0000:00:14.0-3/input1
718[ 1.232713] random: fast init done
719[ 1.260861] usb 3-4: new low-speed USB device number 3 using xhci_hcd
720[ 1.324180] fbcon: inteldrmfb (fb0) is primary device
721[ 1.340896] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
722[ 1.340911] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
723[ 1.341187] ata1.00: supports DRM functions and may not be fully accessible
724[ 1.341605] ata1.00: disabling queued TRIM support
725[ 1.341606] ata1.00: ATA-11: Samsung SSD 860 EVO 500GB, RVT03B6Q, max UDMA/133
726[ 1.341607] ata1.00: 976773168 sectors, multi 1: LBA48 NCQ (depth 31/32), AA
727[ 1.342437] ata1.00: supports DRM functions and may not be fully accessible
728[ 1.342706] ata1.00: disabling queued TRIM support
729[ 1.343217] ata1.00: configured for UDMA/133
730[ 1.343340] scsi 0:0:0:0: Direct-Access ATA Samsung SSD 860 3B6Q PQ: 0 ANSI: 5
731[ 1.343564] ata3.00: ATAPI: hp DVDRAM GTB0N, HCS1, max UDMA/100
732[ 1.345833] ata3.00: configured for UDMA/100
733[ 1.357429] scsi 2:0:0:0: CD-ROM hp DVDRAM GTB0N HCS1 PQ: 0 ANSI: 5
734[ 1.357475] Console: switching to colour frame buffer device 240x75
735[ 1.377429] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
736[ 1.389771] usb 3-4: New USB device found, idVendor=03f0, idProduct=344a, bcdDevice= 1.10
737[ 1.389772] usb 3-4: New USB device strings: Mfr=0, Product=1, SerialNumber=0
738[ 1.389773] usb 3-4: Product: HP USB Slim Keyboard
739[ 1.392579] ata1.00: Enabling discard_zeroes_data
740[ 1.392600] sd 0:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/465 GiB)
741[ 1.392719] sd 0:0:0:0: [sda] Write Protect is off
742[ 1.392720] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
743[ 1.392745] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
744[ 1.392840] ata1.00: Enabling discard_zeroes_data
745[ 1.393116] sda: sda1 sda2
746[ 1.393260] ata1.00: Enabling discard_zeroes_data
747[ 1.393380] sd 0:0:0:0: [sda] Attached SCSI disk
748[ 1.393469] input: HP USB Slim Keyboard as /devices/pci0000:00/0000:00:14.0/usb3/3-4/3-4:1.0/input/input4
749[ 1.405072] sr 2:0:0:0: [sr0] scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
750[ 1.405073] cdrom: Uniform CD-ROM driver Revision: 3.20
751[ 1.405158] sr 2:0:0:0: Attached scsi CD-ROM sr0
752[ 1.444010] hid-generic 0003:03F0:344A.0003: input,hidraw2: USB HID v1.10 Keyboard [HP USB Slim Keyboard] on usb-0000:00:14.0-4/input0
753[ 1.447662] input: HP USB Slim Keyboard as /devices/pci0000:00/0000:00:14.0/usb3/3-4/3-4:1.1/input/input5
754[ 1.497969] hid-generic 0003:03F0:344A.0004: input,hiddev0,hidraw3: USB HID v1.10 Device [HP USB Slim Keyboard] on usb-0000:00:14.0-4/input1
755[ 1.500877] tsc: Refined TSC clocksource calibration: 3591.684 MHz
756[ 1.500890] Switched to clocksource tsc
757[ 1.987849] SGI XFS with ACLs, security attributes, no debug enabled
758[ 1.988925] XFS (dm-0): Mounting V5 Filesystem
759[ 2.014481] XFS (dm-0): Starting recovery (logdev: internal)
760[ 2.031446] XFS (dm-0): Ending recovery (logdev: internal)
761[ 2.219658] systemd-journald[131]: Received SIGTERM from PID 1 (systemd).
762[ 2.261737] type=1404 audit(1579969865.125:2): enforcing=1 old_enforcing=0 auid=4294967295 ses=4294967295
763[ 2.282484] SELinux: 2048 avtab hash slots, 113577 rules.
764[ 2.315324] SELinux: 2048 avtab hash slots, 113577 rules.
765[ 2.333669] SELinux: 8 users, 14 roles, 5068 types, 318 bools, 1 sens, 1024 cats
766[ 2.333672] SELinux: 130 classes, 113577 rules
767[ 2.336247] SELinux: Completing initialization.
768[ 2.336249] SELinux: Setting up existing superblocks.
769[ 2.343412] type=1403 audit(1579969865.207:3): policy loaded auid=4294967295 ses=4294967295
770[ 2.348339] systemd[1]: Successfully loaded SELinux policy in 86.383ms.
771[ 2.372816] ip_tables: (C) 2000-2006 Netfilter Core Team
772[ 2.372838] systemd[1]: Inserted module 'ip_tables'
773[ 2.387362] systemd[1]: Relabelled /dev, /run and /sys/fs/cgroup in 12.452ms.
774[ 2.807643] loop: module loaded
775[ 2.811961] squashfs: version 4.0 (2009/01/31) Phillip Lougher
776[ 2.865233] systemd-journald[1081]: Received request to flush runtime journal from PID 1
777[ 2.885559] parport_pc 00:09: reported by Plug and Play ACPI
778[ 2.885680] parport0: PC-style at 0x378 (0x778), irq 7 [PCSPP,TRISTATE,EPP]
779[ 2.914222] i801_smbus 0000:00:1f.3: SMBus using PCI interrupt
780[ 2.914592] input: PC Speaker as /devices/platform/pcspkr/input/input6
781[ 2.917173] mei_me 0000:00:16.0: irq 30 for MSI/MSI-X
782[ 2.922947] sd 0:0:0:0: Attached scsi generic sg0 type 0
783[ 2.923023] sr 2:0:0:0: Attached scsi generic sg1 type 5
784[ 2.926625] cryptd: max_cpu_qlen set to 1000
785[ 2.939927] AVX2 version of gcm_enc/dec engaged.
786[ 2.939930] AES CTR mode by8 optimization enabled
787[ 2.956664] alg: No test for __gcm-aes-aesni (__driver-gcm-aes-aesni)
788[ 2.957272] alg: No test for __generic-gcm-aes-aesni (__driver-generic-gcm-aes-aesni)
789[ 2.971781] snd_hda_intel 0000:00:03.0: bound 0000:00:02.0 (ops i915_audio_component_bind_ops [i915])
790[ 2.971810] snd_hda_intel 0000:00:03.0: irq 31 for MSI/MSI-X
791[ 2.971927] snd_hda_intel 0000:00:1b.0: irq 32 for MSI/MSI-X
792[ 2.998259] snd_hda_codec_realtek hdaudioC1D0: autoconfig for ALC221: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:line
793[ 2.998264] snd_hda_codec_realtek hdaudioC1D0: speaker_outs=1 (0x17/0x0/0x0/0x0/0x0)
794[ 2.998266] snd_hda_codec_realtek hdaudioC1D0: hp_outs=1 (0x21/0x0/0x0/0x0/0x0)
795[ 2.998268] snd_hda_codec_realtek hdaudioC1D0: mono: mono_out=0x0
796[ 2.998270] snd_hda_codec_realtek hdaudioC1D0: inputs:
797[ 2.998272] snd_hda_codec_realtek hdaudioC1D0: Mic=0x1a
798[ 2.998274] snd_hda_codec_realtek hdaudioC1D0: Line=0x1b
799[ 3.001242] input: HDA Intel HDMI HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:03.0/sound/card0/input7
800[ 3.001307] input: HDA Intel HDMI HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:03.0/sound/card0/input8
801[ 3.001370] input: HDA Intel HDMI HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:03.0/sound/card0/input9
802[ 3.001429] input: HDA Intel HDMI HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:03.0/sound/card0/input10
803[ 3.001486] input: HDA Intel HDMI HDMI/DP,pcm=10 as /devices/pci0000:00/0000:00:03.0/sound/card0/input11
804[ 3.034086] XFS (sda1): Mounting V5 Filesystem
805[ 3.036781] input: HDA Intel PCH Mic as /devices/pci0000:00/0000:00:1b.0/sound/card1/input12
806[ 3.036866] input: HDA Intel PCH Line as /devices/pci0000:00/0000:00:1b.0/sound/card1/input13
807[ 3.036939] input: HDA Intel PCH Line Out as /devices/pci0000:00/0000:00:1b.0/sound/card1/input14
808[ 3.037002] input: HDA Intel PCH Front Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card1/input15
809[ 3.058038] intel_rapl: Found RAPL domain package
810[ 3.058042] intel_rapl: Found RAPL domain core
811[ 3.058045] intel_rapl: Found RAPL domain uncore
812[ 3.058047] intel_rapl: Found RAPL domain dram
813[ 3.058051] intel_rapl: RAPL package 0 domain package locked by BIOS
814[ 3.058062] intel_rapl: RAPL package 0 domain dram locked by BIOS
815[ 3.062456] XFS (sda1): Starting recovery (logdev: internal)
816[ 3.068214] XFS (sda1): Ending recovery (logdev: internal)
817[ 3.156621] ppdev: user-space parallel port driver
818[ 3.161203] iTCO_vendor_support: vendor-support=0
819[ 3.162522] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11
820[ 3.162558] iTCO_wdt: Found a Lynx Point TCO device (Version=2, TCOBASE=0x0460)
821[ 3.162743] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
822[ 3.167505] input: HP WMI hotkeys as /devices/virtual/input/input16
823[ 3.253216] XFS (dm-2): Mounting V5 Filesystem
824[ 3.261821] Adding 8191996k swap on /dev/mapper/centos_opus-swap. Priority:-2 extents:1 across:8191996k SSFS
825[ 3.273390] XFS (dm-2): Starting recovery (logdev: internal)
826[ 3.276326] XFS (dm-2): Ending recovery (logdev: internal)
827[ 4.384529] type=1305 audit(1579969867.248:4): audit_pid=1900 old=0 auid=4294967295 ses=4294967295 subj=system_u:system_r:auditd_t:s0 res=1
828[ 4.421381] RPC: Registered named UNIX socket transport module.
829[ 4.421383] RPC: Registered udp transport module.
830[ 4.421384] RPC: Registered tcp transport module.
831[ 4.421384] RPC: Registered tcp NFSv4.1 backchannel transport module.
832[ 4.718544] random: crng init done
833[ 4.944882] vboxdrv: loading out-of-tree module taints kernel.
834[ 4.945756] vboxdrv: module verification failed: signature and/or required key missing - tainting kernel
835[ 4.950030] vboxdrv: Found 8 processor cores
836[ 4.966361] vboxdrv: TSC mode is Invariant, tentative frequency 3591683683 Hz
837[ 4.966363] vboxdrv: Successfully loaded version 6.0.14 (interface 0x00290008)
838[ 5.143791] ip6_tables: (C) 2000-2006 Netfilter Core Team
839[ 5.160030] Ebtables v2.0 registered
840[ 5.168367] Netfilter messages via NETLINK v0.30.
841[ 5.172201] ip_set: protocol 7
842[ 5.172499] VBoxNetFlt: Successfully started.
843[ 5.174028] VBoxNetAdp: Successfully started.
844[ 5.175878] VBoxPciLinuxInit
845[ 5.175882] vboxpci: IOMMU not found (not registered)
846[ 5.296315] IPv6: ADDRCONF(NETDEV_UP): eno1: link is not ready
847[ 5.346801] nf_conntrack version 0.5.0 (65536 buckets, 262144 max)
848[ 5.393265] e1000e 0000:00:19.0: irq 27 for MSI/MSI-X
849[ 5.494178] e1000e 0000:00:19.0: irq 27 for MSI/MSI-X
850[ 5.494287] IPv6: ADDRCONF(NETDEV_UP): eno1: link is not ready
851[ 5.540155] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this.
852[ 9.000671] e1000e: eno1 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: Rx/Tx
853[ 9.000727] IPv6: ADDRCONF(NETDEV_CHANGE): eno1: link becomes ready
854[ 9.679702] FS-Cache: Loaded
855[ 9.699988] FS-Cache: Netfs 'nfs' registered for caching
856[ 9.703106] Key type dns_resolver registered
857[ 9.722189] NFS: Registering the id_resolver key type
858[ 9.722198] Key type id_resolver registered
859[ 9.722199] Key type id_legacy registered
860[ 9.949905] L1TF CPU bug present and SMT on, data leak possible. See CVE-2018-3646 and https://www.kernel.org/doc/html/latest/admin-guide/hw-vuln/l1tf.html for details.
861[ 9.969745] TECH PREVIEW: Overlay filesystem may not be fully supported.
862Please review provided documentation for limitations.
863[ 10.197209] tun: Universal TUN/TAP device driver, 1.6
864[ 10.197212] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
865[ 10.199400] virbr0: port 1(virbr0-nic) entered blocking state
866[ 10.199404] virbr0: port 1(virbr0-nic) entered disabled state
867[ 10.199445] device virbr0-nic entered promiscuous mode
868[ 10.292541] Bridge firewalling registered
869[ 10.312450] virbr0: port 1(virbr0-nic) entered blocking state
870[ 10.312454] virbr0: port 1(virbr0-nic) entered listening state
871[ 10.312501] IPv6: ADDRCONF(NETDEV_UP): virbr0: link is not ready
872[ 10.349551] virbr0: port 1(virbr0-nic) entered disabled state
873[ 10.477458] ctnetlink v0.93: registering with nfnetlink.
874[ 10.579444] IPv6: ADDRCONF(NETDEV_UP): docker_gwbridge: link is not ready
875[ 10.685449] IPv6: ADDRCONF(NETDEV_UP): br-cd34d8debe22: link is not ready
876[ 10.791265] IPv6: ADDRCONF(NETDEV_UP): docker0: link is not ready
877[ 11.394778] docker0: port 1(vethd0f48be) entered blocking state
878[ 11.394782] docker0: port 1(vethd0f48be) entered disabled state
879[ 11.394830] device vethd0f48be entered promiscuous mode
880[ 11.394918] IPv6: ADDRCONF(NETDEV_UP): vethd0f48be: link is not ready
881[ 11.394920] docker0: port 1(vethd0f48be) entered blocking state
882[ 11.394922] docker0: port 1(vethd0f48be) entered forwarding state
883[ 11.395243] br-cd34d8debe22: port 1(veth9deb06e) entered blocking state
884[ 11.395245] br-cd34d8debe22: port 1(veth9deb06e) entered disabled state
885[ 11.395286] device veth9deb06e entered promiscuous mode
886[ 11.395375] docker0: port 1(vethd0f48be) entered disabled state
887[ 11.395415] IPv6: ADDRCONF(NETDEV_UP): veth9deb06e: link is not ready
888[ 11.395418] br-cd34d8debe22: port 1(veth9deb06e) entered blocking state
889[ 11.395420] br-cd34d8debe22: port 1(veth9deb06e) entered forwarding state
890[ 11.395629] br-cd34d8debe22: port 1(veth9deb06e) entered disabled state
891[ 11.405161] docker0: port 2(veth739955d) entered blocking state
892[ 11.405166] docker0: port 2(veth739955d) entered disabled state
893[ 11.405218] device veth739955d entered promiscuous mode
894[ 11.405297] IPv6: ADDRCONF(NETDEV_UP): veth739955d: link is not ready
895[ 11.405300] docker0: port 2(veth739955d) entered blocking state
896[ 11.405301] docker0: port 2(veth739955d) entered forwarding state
897[ 11.408341] IPv6: ADDRCONF(NETDEV_CHANGE): docker0: link becomes ready
898[ 11.408745] docker0: port 2(veth739955d) entered disabled state
899[ 11.454327] br-cd34d8debe22: port 2(vethc1f2dda) entered blocking state
900[ 11.454330] br-cd34d8debe22: port 2(vethc1f2dda) entered disabled state
901[ 11.454359] device vethc1f2dda entered promiscuous mode
902[ 11.454429] IPv6: ADDRCONF(NETDEV_UP): vethc1f2dda: link is not ready
903[ 11.454432] br-cd34d8debe22: port 2(vethc1f2dda) entered blocking state
904[ 11.454434] br-cd34d8debe22: port 2(vethc1f2dda) entered forwarding state
905[ 11.454546] IPv6: ADDRCONF(NETDEV_CHANGE): br-cd34d8debe22: link becomes ready
906[ 11.454865] br-cd34d8debe22: port 2(vethc1f2dda) entered disabled state
907[ 11.558196] br-cd34d8debe22: port 3(vethca1325e) entered blocking state
908[ 11.558199] br-cd34d8debe22: port 3(vethca1325e) entered disabled state
909[ 11.558252] device vethca1325e entered promiscuous mode
910[ 11.558316] IPv6: ADDRCONF(NETDEV_UP): vethca1325e: link is not ready
911[ 11.558319] br-cd34d8debe22: port 3(vethca1325e) entered blocking state
912[ 11.558321] br-cd34d8debe22: port 3(vethca1325e) entered forwarding state
913[ 11.695501] br-cd34d8debe22: port 4(veth2d76c5b) entered blocking state
914[ 11.695503] br-cd34d8debe22: port 4(veth2d76c5b) entered disabled state
915[ 11.695534] device veth2d76c5b entered promiscuous mode
916[ 11.695593] IPv6: ADDRCONF(NETDEV_UP): veth2d76c5b: link is not ready
917[ 11.695595] br-cd34d8debe22: port 4(veth2d76c5b) entered blocking state
918[ 11.695596] br-cd34d8debe22: port 4(veth2d76c5b) entered forwarding state
919[ 11.846721] br-cd34d8debe22: port 3(vethca1325e) entered disabled state
920[ 11.846782] br-cd34d8debe22: port 4(veth2d76c5b) entered disabled state
921[ 11.846818] IPv6: ADDRCONF(NETDEV_CHANGE): vethd0f48be: link becomes ready
922[ 11.846848] docker0: port 1(vethd0f48be) entered blocking state
923[ 11.846851] docker0: port 1(vethd0f48be) entered forwarding state
924[ 11.975970] IPv6: ADDRCONF(NETDEV_CHANGE): veth9deb06e: link becomes ready
925[ 11.976008] br-cd34d8debe22: port 1(veth9deb06e) entered blocking state
926[ 11.976011] br-cd34d8debe22: port 1(veth9deb06e) entered forwarding state
927[ 12.026991] IPv6: ADDRCONF(NETDEV_CHANGE): veth739955d: link becomes ready
928[ 12.027047] docker0: port 2(veth739955d) entered blocking state
929[ 12.027050] docker0: port 2(veth739955d) entered forwarding state
930[ 12.087249] IPv6: ADDRCONF(NETDEV_CHANGE): vethc1f2dda: link becomes ready
931[ 12.087277] br-cd34d8debe22: port 2(vethc1f2dda) entered blocking state
932[ 12.087279] br-cd34d8debe22: port 2(vethc1f2dda) entered forwarding state
933[ 12.117893] IPv6: ADDRCONF(NETDEV_CHANGE): vethca1325e: link becomes ready
934[ 12.117930] br-cd34d8debe22: port 3(vethca1325e) entered blocking state
935[ 12.117934] br-cd34d8debe22: port 3(vethca1325e) entered forwarding state
936[ 12.142849] IPv6: ADDRCONF(NETDEV_CHANGE): veth2d76c5b: link becomes ready
937[ 12.142876] br-cd34d8debe22: port 4(veth2d76c5b) entered blocking state
938[ 12.142878] br-cd34d8debe22: port 4(veth2d76c5b) entered forwarding state
939[ 13.637894] br0: port 1(vxlan0) entered blocking state
940[ 13.637899] br0: port 1(vxlan0) entered disabled state
941[ 13.637973] device vxlan0 entered promiscuous mode
942[ 13.638273] br0: port 1(vxlan0) entered blocking state
943[ 13.638276] br0: port 1(vxlan0) entered forwarding state
944[ 13.741816] br0: port 2(veth0) entered blocking state
945[ 13.741819] br0: port 2(veth0) entered disabled state
946[ 13.741876] device veth0 entered promiscuous mode
947[ 13.741980] IPv6: ADDRCONF(NETDEV_UP): veth0: link is not ready
948[ 13.741982] br0: port 2(veth0) entered blocking state
949[ 13.741984] br0: port 2(veth0) entered forwarding state
950[ 13.926974] IPv6: ADDRCONF(NETDEV_CHANGE): veth0: link becomes ready
951[ 13.976223] docker_gwbridge: port 1(veth1232cc2) entered blocking state
952[ 13.976226] docker_gwbridge: port 1(veth1232cc2) entered disabled state
953[ 13.976275] device veth1232cc2 entered promiscuous mode
954[ 13.976366] IPv6: ADDRCONF(NETDEV_UP): veth1232cc2: link is not ready
955[ 13.976368] docker_gwbridge: port 1(veth1232cc2) entered blocking state
956[ 13.976369] docker_gwbridge: port 1(veth1232cc2) entered forwarding state
957[ 13.976592] docker_gwbridge: port 1(veth1232cc2) entered disabled state
958[ 14.010161] IPv6: ADDRCONF(NETDEV_CHANGE): veth1232cc2: link becomes ready
959[ 14.010239] docker_gwbridge: port 1(veth1232cc2) entered blocking state
960[ 14.010243] docker_gwbridge: port 1(veth1232cc2) entered forwarding state
961[ 14.010293] IPv6: ADDRCONF(NETDEV_CHANGE): docker_gwbridge: link becomes ready
962[ 26.337495] fuse init (API version 7.23)
963[ 28.168331] rfkill: input handler disabled
964[ 42.150487] SUPR0GipMap: fGetGipCpu=0xb
965[ 42.566778] vboxdrv: ffffffffc0c81020 VMMR0.r0
966[ 42.664069] vboxdrv: ffffffffc0000020 VBoxDDR0.r0
967[ 42.679841] VBoxNetFlt: attached to 'eno1' / 50:65:f3:27:d8:7e
968[ 42.706898] device eno1 entered promiscuous mode
969[ 42.892082] vboxdrv: ffffffffc0028020 VBoxEhciR0.r0
970[ 159.595377] usb 3-7: new full-speed USB device number 4 using xhci_hcd
971[ 159.720065] usb 3-7: New USB device found, idVendor=10c4, idProduct=8a2a, bcdDevice= 1.00
972[ 159.720068] usb 3-7: New USB device strings: Mfr=1, Product=2, SerialNumber=5
973[ 159.720069] usb 3-7: Product: HubZ Smart Home Controller
974[ 159.720070] usb 3-7: Manufacturer: Silicon Labs
975[ 159.720072] usb 3-7: SerialNumber: 61201041
976[ 159.754452] usbcore: registered new interface driver cp210x
977[ 159.754471] usbserial: USB Serial support registered for cp210x
978[ 159.754490] cp210x 3-7:1.0: cp210x converter detected
979[ 159.755249] usb 3-7: cp210x converter now attached to ttyUSB0
980[ 159.755269] cp210x 3-7:1.1: cp210x converter detected
981[ 159.755649] usb 3-7: cp210x converter now attached to ttyUSB1
982[ 159.846982] cp210x ttyUSB0: cp210x converter now disconnected from ttyUSB0
983[ 159.847004] cp210x 3-7:1.0: device disconnected
984[ 159.847116] cp210x ttyUSB1: cp210x converter now disconnected from ttyUSB1
985[ 159.847133] cp210x 3-7:1.1: device disconnected
986[ 160.068604] usb 3-7: reset full-speed USB device number 4 using xhci_hcd
987[ 160.501643] usb 3-7: reset full-speed USB device number 4 using xhci_hcd
988[ 166.208782] usb 3-8: new full-speed USB device number 5 using xhci_hcd
989[ 166.332284] usb 3-8: New USB device found, idVendor=1a86, idProduct=e024, bcdDevice= 1.0c
990[ 166.332286] usb 3-8: New USB device strings: Mfr=0, Product=0, SerialNumber=0
991[ 166.333905] hid-generic 0003:1A86:E024.0005: hiddev0,hidraw4: USB HID v1.00 Device [HID 1a86:e024] on usb-0000:00:14.0-8/input0
992[ 166.683990] usb 3-8: reset full-speed USB device number 5 using xhci_hcd
993[ 167.106016] usb 3-8: reset full-speed USB device number 5 using xhci_hcd
994[11491.371503] perf: interrupt took too long (2507 > 2500), lowering kernel.perf_event_max_sample_rate to 79000
995[14186.070595] perf: interrupt took too long (3134 > 3133), lowering kernel.perf_event_max_sample_rate to 63000
996[27884.845892] perf: interrupt took too long (3973 > 3917), lowering kernel.perf_event_max_sample_rate to 50000
997[52940.804291] [drm] HPD interrupt storm detected on connector DP-1: switching from hotplug detection to polling
998[79295.292866] TCP: lp registered
999[79305.524038] [drm] HPD interrupt storm detected on connector DP-1: switching from hotplug detection to polling
1000[86301.975889] [drm] HPD interrupt storm detected on connector DP-1: switching from hotplug detection to polling
1001[89007.765133] [drm] HPD interrupt storm detected on connector DP-1: switching from hotplug detection to polling
1002[165707.669405] [drm] HPD interrupt storm detected on connector DP-1: switching from hotplug detection to polling
1003[187628.607542] [drm] HPD interrupt storm detected on connector DP-1: switching from hotplug detection to polling
1004[187855.214419] [drm] HPD interrupt storm detected on connector DP-1: switching from hotplug detection to polling
1005[190851.342200] [drm] HPD interrupt storm detected on connector DP-1: switching from hotplug detection to polling
1006[233559.577705] nfs: server 192.168.42.151 not responding, timed out
1007[235477.116505] nfs: server 192.168.42.151 not responding, timed out
1008[252118.065789] [drm] HPD interrupt storm detected on connector DP-1: switching from hotplug detection to polling