· 6 years ago · Feb 03, 2020, 11:00 AM
1[ 0.000000] Booting Linux on physical CPU 0x0000000000 [0x410fd030]
2[ 0.000000] Linux version 5.5.0-rc7-postmarketos-qcom-msm8916 (pmos@amethyst) (gcc version 9.2.0 (Alpine 9.2.0)) #8 SMP PREEMPT Sun Feb 2 06:07:57 UTC 2020
3[ 0.000000] Machine model: Motorola Moto G4 Play (harpia)
4[ 0.000000] earlycon: msm_serial_dm0 at MMIO 0x00000000078af000 (options '')
5[ 0.000000] printk: bootconsole [msm_serial_dm0] enabled
6[ 0.000000] cma: Reserved 32 MiB at 0x00000000fe000000
7[ 0.000000] On node 0 totalpages: 507904
8[ 0.000000] DMA zone: 3840 pages used for memmap
9[ 0.000000] DMA zone: 0 pages reserved
10[ 0.000000] DMA zone: 245760 pages, LIFO batch:63
11[ 0.000000] DMA32 zone: 4096 pages used for memmap
12[ 0.000000] DMA32 zone: 262144 pages, LIFO batch:63
13[ 0.000000] percpu: Embedded 21 pages/cpu s48600 r8192 d29224 u86016
14[ 0.000000] pcpu-alloc: s48600 r8192 d29224 u86016 alloc=21*4096
15[ 0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3
16[ 0.000000] Detected VIPT I-cache on CPU0
17[ 0.000000] CPU features: detected: ARM errata 826319, 827319, 824069, 819472
18[ 0.000000] CPU features: detected: ARM erratum 845719
19[ 0.000000] CPU features: detected: ARM erratum 843419
20[ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 499968
21[ 0.000000] Kernel command line: earlycon=msm_serial_dm,0x78af000 console=ttyMSM0,115200,n8 PMOS_NO_OUTPUT_REDIRECT androidboot.emmc=true androidboot.serialno=7d1ff2be androidboot.baseband=msm
22[ 0.000000] Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes, linear)
23[ 0.000000] Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes, linear)
24[ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off
25[ 0.000000] software IO TLB: mapped [mem 0xbbfff000-0xbffff000] (64MB)
26[ 0.000000] Memory: 1875820K/2031616K available (6718K kernel code, 558K rwdata, 2620K rodata, 1408K init, 305K bss, 123028K reserved, 32768K cma-reserved)
27[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
28[ 0.000000] rcu: Preemptible hierarchical RCU implementation.
29[ 0.000000] Tasks RCU enabled.
30[ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies.
31[ 0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0
32[ 0.000000] random: get_random_bytes called from start_kernel+0x2b8/0x43c with crng_init=0
33[ 0.000000] arch_timer: cp15 and mmio timer(s) running at 19.20MHz (virt/virt).
34[ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x46d987e47, max_idle_ns: 440795202767 ns
35[ 0.000005] sched_clock: 56 bits at 19MHz, resolution 52ns, wraps every 4398046511078ns
36[ 0.011082] Console: colour dummy device 80x25
37[ 0.018776] Calibrating delay loop (skipped), value calculated using timer frequency.. 38.40 BogoMIPS (lpj=76800)
38[ 0.023273] pid_max: default: 32768 minimum: 301
39[ 0.033699] LSM: Security Framework initializing
40[ 0.038355] Mount-cache hash table entries: 4096 (order: 3, 32768 bytes, linear)
41[ 0.042903] Mountpoint-cache hash table entries: 4096 (order: 3, 32768 bytes, linear)
42[ 0.074363] ASID allocator initialised with 32768 entries
43[ 0.082360] rcu: Hierarchical SRCU implementation.
44[ 0.098402] smp: Bringing up secondary CPUs ...
45[ 0.130806] Detected VIPT I-cache on CPU1
46[ 0.130857] CPU1: Booted secondary processor 0x0000000001 [0x410fd030]
47[ 0.162821] Detected VIPT I-cache on CPU2
48[ 0.162863] CPU2: Booted secondary processor 0x0000000002 [0x410fd030]
49[ 0.194876] Detected VIPT I-cache on CPU3
50[ 0.194913] CPU3: Booted secondary processor 0x0000000003 [0x410fd030]
51[ 0.194999] smp: Brought up 1 node, 4 CPUs
52[ 0.225421] SMP: Total of 4 processors activated.
53[ 0.229496] CPU features: detected: 32-bit EL0 Support
54[ 0.234285] CPU features: detected: CRC32 instructions
55[ 0.246713] CPU: All CPU(s) started at EL1
56[ 0.246750] alternatives: patching kernel code
57[ 0.250839] devtmpfs: initialized
58[ 0.264374] KASLR disabled due to lack of seed
59[ 0.264727] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
60[ 0.267736] futex hash table entries: 1024 (order: 4, 65536 bytes, linear)
61[ 0.278835] pinctrl core: initialized pinctrl subsystem
62[ 0.284877] thermal_sys: Registered thermal governor 'step_wise'
63[ 0.285967] NET: Registered protocol family 16
64[ 0.303022] DMA: preallocated 256 KiB pool for atomic allocations
65[ 0.303076] audit: initializing netlink subsys (disabled)
66[ 0.308255] audit: type=2000 audit(0.256:1): state=initialized audit_enabled=0 res=1
67[ 0.313507] cpuidle: using governor menu
68[ 0.321550] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers.
69[ 0.343473] HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages
70[ 0.343501] HugeTLB registered 32.0 MiB page size, pre-allocated 0 pages
71[ 0.349248] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
72[ 0.355924] HugeTLB registered 64.0 KiB page size, pre-allocated 0 pages
73[ 0.364885] cryptd: max_cpu_qlen set to 1000
74[ 0.374272] iommu: Default domain type: Translated
75[ 0.374571] SCSI subsystem initialized
76[ 0.378258] usbcore: registered new interface driver usbfs
77[ 0.381994] usbcore: registered new interface driver hub
78[ 0.387507] usbcore: registered new device driver usb
79[ 0.393080] pps_core: LinuxPPS API ver. 1 registered
80[ 0.397851] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
81[ 0.402918] PTP clock support registered
82[ 0.413408] clocksource: Switched to clocksource arch_sys_counter
83[ 0.416121] VFS: Disk quotas dquot_6.6.0
84[ 0.421956] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
85[ 0.432513] NET: Registered protocol family 2
86[ 0.432993] tcp_listen_portaddr_hash hash table entries: 1024 (order: 2, 16384 bytes, linear)
87[ 0.437053] TCP established hash table entries: 16384 (order: 5, 131072 bytes, linear)
88[ 0.445667] TCP bind hash table entries: 16384 (order: 6, 262144 bytes, linear)
89[ 0.453647] TCP: Hash tables configured (established 16384 bind 16384)
90[ 0.460651] UDP hash table entries: 1024 (order: 3, 32768 bytes, linear)
91[ 0.467180] UDP-Lite hash table entries: 1024 (order: 3, 32768 bytes, linear)
92[ 0.474163] NET: Registered protocol family 1
93[ 0.481219] Unpacking initramfs...
94[ 0.649478] Freeing initrd memory: 4880K
95[ 0.650069] hw perfevents: enabled with armv8_cortex_a53 PMU driver, 7 counters available
96[ 0.655313] Initialise system trusted keyrings
97[ 0.660674] workingset: timestamp_bits=46 max_order=19 bucket_order=0
98[ 0.691918] Key type asymmetric registered
99[ 0.691938] Asymmetric key parser 'x509' registered
100[ 0.694945] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 248)
101[ 0.699691] io scheduler mq-deadline registered
102[ 0.707318] io scheduler kyber registered
103[ 0.717440] msm_serial 78af000.serial: msm_serial: detected port #0
104[ 0.717488] msm_serial 78af000.serial: uartclk = 7372800
105[ 0.722549] 78af000.serial: ttyMSM0 at MMIO 0x78af000 (irq = 9, base_baud = 460800) is a MSM
106[ 0.728095] msm_serial: console setup on port #0
107[ 0.736546] printk: console [ttyMSM0] enabled
108[ 0.739884] printk: bootconsole [msm_serial_dm0] disabled
109[ 0.750018] msm_serial: driver initialized
110[ 0.755237] qcom-iommu 1ef0000.iommu: iommu sec: pgtable size: 94208
111[ 0.769974] loop: module loaded
112[ 0.770506] spmi spmi-0: PMIC arbiter version v2 (0x20010000)
113[ 0.776437] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
114[ 0.777911] usbcore: registered new interface driver usb-storage
115[ 0.798313] rtc-pm8xxx 200f000.spmi:pm8916@0:rtc@6000: registered as rtc0
116[ 0.798472] i2c /dev entries driver
117[ 0.804319] i2c_qup 78b6000.i2c: using default clock-frequency 100000
118[ 0.807390] i2c_qup 78b6000.i2c:
119 tx channel not available
120[ 0.814604] i2c_qup 78b8000.i2c: using default clock-frequency 100000
121[ 0.820765] i2c_qup 78b8000.i2c:
122 tx channel not available
123[ 0.828950] input: pm8941_pwrkey as /devices/platform/soc/200f000.spmi/spmi-0/0-00/200f000.spmi:pm8916@0:pon@800/200f000.spmi:pm8916@0:pon@800:pwrkey/input/input0
124[ 0.835365] input: pm8941_pwrkey as /devices/platform/soc/200f000.spmi/spmi-0/0-00/200f000.spmi:pm8916@0:pon@800/200f000.spmi:pm8916@0:pon@800:volume-down/input/input1
125[ 0.850519] device-mapper: ioctl: 4.41.0-ioctl (2019-09-16) initialised: dm-devel@redhat.com
126[ 0.865655] sdhci: Secure Digital Host Controller Interface driver
127[ 0.872223] sdhci: Copyright(c) Pierre Ossman
128[ 0.878207] sdhci-pltfm: SDHCI platform and OF driver helper
129[ 0.883909] sdhci_msm 7864900.sdhci: Got CD GPIO
130[ 0.889301] ledtrig-cpu: registered to indicate activity on CPUs
131[ 0.894716] usbcore: registered new interface driver usbhid
132[ 0.898964] usbhid: USB HID core driver
133[ 0.905744] NET: Registered protocol family 17
134[ 0.908542] registered taskstats version 1
135[ 0.912595] Loading compiled-in X.509 certificates
136[ 0.937997] s1: supplied by regulator-dummy
137[ 0.938048] s1: Bringing 0uV into 500000-500000uV
138[ 0.941137] s2: supplied by regulator-dummy
139[ 0.946300] s3: supplied by regulator-dummy
140[ 0.950496] debugfs: Directory '4a9000.thermal-sensor' with parent 'tsens' already present!
141[ 0.954332] s3: Bringing 0uV into 1200000-1200000uV
142[ 0.963232] s4: supplied by regulator-dummy
143[ 0.967336] s4: Bringing 0uV into 1800000-1800000uV
144[ 0.971993] sdhci_msm 7864900.sdhci: Got CD GPIO
145[ 0.976546] l1: supplied by s3
146[ 0.981468] l1: Bringing 0uV into 1225000-1225000uV
147[ 0.984368] l2: supplied by s3
148[ 0.985723] sdhci_msm 7864900.sdhci: Got CD GPIO
149[ 0.988769] l2: Bringing 0uV into 1200000-1200000uV
150[ 0.993462] input: GPIO Buttons as /devices/platform/soc/soc:gpio-keys/input/input2
151[ 0.996780] l3: supplied by s3
152[ 1.008896] l3: Bringing 0uV into 500000-500000uV
153[ 1.008965] rtc-pm8xxx 200f000.spmi:pm8916@0:rtc@6000: setting system clock to 1970-01-02T01:11:59 UTC (90719)
154[ 1.012138] l4: supplied by s4
155[ 1.017359] sdhci_msm 7864900.sdhci: Got CD GPIO
156[ 1.026683] l4: Bringing 0uV into 2050000-2050000uV
157[ 1.034682] l5: supplied by s4
158[ 1.034741] l5: Bringing 0uV into 1800000-1800000uV
159[ 1.035207] Freeing unused kernel memory: 1408K
160[ 1.036766] l6: supplied by s4
161[ 1.045941] l6: Bringing 0uV into 1800000-1800000uV
162[ 1.049453] l7: supplied by s4
163[ 1.054008] l7: Bringing 0uV into 1800000-1800000uV
164[ 1.057285] l8: supplied by regulator-dummy
165[ 1.061910] l8: Bringing 0uV into 2850000-2850000uV
166[ 1.066214] l9: supplied by regulator-dummy
167[ 1.070939] l9: Bringing 0uV into 3300000-3300000uV
168[ 1.075232] l10: supplied by regulator-dummy
169[ 1.079965] l10: Bringing 0uV into 2800000-2800000uV
170[ 1.084631] l11: supplied by regulator-dummy
171[ 1.089431] l11: Bringing 0uV into 1800000-1800000uV
172[ 1.093819] l12: supplied by regulator-dummy
173[ 1.098641] l12: Bringing 0uV into 1800000-1800000uV
174[ 1.103015] l13: supplied by regulator-dummy
175[ 1.107832] l13: Bringing 0uV into 3075000-3075000uV
176[ 1.112229] l14: supplied by regulator-dummy
177[ 1.117031] l14: Bringing 0uV into 1800000-1800000uV
178[ 1.121435] l15: supplied by regulator-dummy
179[ 1.126230] l15: Bringing 0uV into 1800000-1800000uV
180[ 1.130627] l16: supplied by regulator-dummy
181[ 1.135432] l16: Bringing 0uV into 3100000-3100000uV
182[ 1.139822] l17: supplied by regulator-dummy
183[ 1.144661] l17: Bringing 0uV into 2850000-2850000uV
184[ 1.149028] l18: supplied by regulator-dummy
185[ 1.153836] l18: Bringing 0uV into 2700000-2700000uV
186[ 1.177608] Run /init as init process
187[ 1.186332] mmc0: SDHCI controller on 7824900.sdhci [7824900.sdhci] using ADMA 64-bit
188[ 1.187181] sdhci_msm 7864900.sdhci: Got CD GPIO
189[ 1.229958] mmc1: SDHCI controller on 7864900.sdhci [7864900.sdhci] using ADMA 64-bit
190[ 1.263821] mmc0: new HS200 MMC card at address 0001
191[ 1.268505] mmcblk0: mmc0:0001 QE13MB 14.6 GiB
192[ 1.268747] mmcblk0boot0: mmc0:0001 QE13MB partition 1 4.00 MiB
193[ 1.272412] mmcblk0boot1: mmc0:0001 QE13MB partition 2 4.00 MiB
194[ 1.278213] mmcblk0rpmb: mmc0:0001 QE13MB partition 3 4.00 MiB, chardev (246:0)
195[ 1.292972] mmcblk0: p1 p2 p3 p4 p5 p6 p7 p8 p9 p10 p11 p12 p13 p14 p15 p16 p17 p18 p19 p20 p21 p22 p23 p24 p25 p26 p27 p28 p29 p30 p31 p32 p33 p34 p35 p36 p37 p38 p39 p40 p41
196[ 1.409005] random: fast init done
197[ 2.147916] using random self ethernet address
198[ 2.153039] using random host ethernet address
199[ 2.172750] usb0: HOST MAC 2a:e0:f4:28:c5:70
200[ 2.172849] usb0: MAC ba:e9:ca:5a:a8:32
201[ 2.176456] l13: voltage operation not allowed
202[ 2.332987] EXT4-fs (dm-0): mounting ext2 file system using the ext4 subsystem
203[ 2.334751] EXT4-fs (dm-0): mounted filesystem without journal. Opts: (null)
204[ 4.024636] EXT4-fs (dm-1): mounted filesystem with ordered data mode. Opts: (null)
205[ 6.125650] udevd[958]: starting version 3.2.9
206[ 6.132434] random: udevd: uninitialized urandom read (16 bytes read)
207[ 6.133044] random: udevd: uninitialized urandom read (16 bytes read)
208[ 6.133110] random: udevd: uninitialized urandom read (16 bytes read)
209[ 6.162710] udevd[958]: starting eudev-3.2.9
210[ 6.582093] qcom-wcnss-pil a204000.wcnss: a204000.wcnss supply vddcx not found, using dummy regulator
211[ 6.596744] spmi-temp-alarm 200f000.spmi:pm8916@0:temp-alarm@2400: failed to register sensor
212[ 6.608818] NET: Registered protocol family 42
213[ 6.609959] remoteproc remoteproc0: a204000.wcnss is available
214[ 6.611592] remoteproc remoteproc0: powering up a204000.wcnss
215[ 6.611604] remoteproc remoteproc0: Booting fw image wcnss.mdt, size 7260
216[ 6.623318] mc: Linux media interface: v0.10
217[ 6.681812] rmi4_i2c 0-0020: registering I2C-connected sensor
218[ 6.939406] NET: Registered protocol family 10
219[ 6.944493] Segment Routing with IPv6
220[ 7.035722] apq8016-lpass-cpu 7708000.lpass: asoc_qcom_lpass_cpu_platform_probe() error getting optional mi2s-osr-clk0: -2
221[ 7.035744] apq8016-lpass-cpu 7708000.lpass: asoc_qcom_lpass_cpu_platform_probe() error getting optional mi2s-osr-clk1: -2
222[ 7.035761] apq8016-lpass-cpu 7708000.lpass: asoc_qcom_lpass_cpu_platform_probe() error getting optional mi2s-osr-clk2: -2
223[ 7.035778] apq8016-lpass-cpu 7708000.lpass: asoc_qcom_lpass_cpu_platform_probe() error getting optional mi2s-osr-clk3: -2
224[ 7.095272] remoteproc remoteproc0: remote processor a204000.wcnss is now up
225[ 7.098031] qcom,pm8916-wcd-spmi-codec 200f000.spmi:pm8916@1:codec@f000: DT property missing, MBHC btn detection disabled
226[ 7.152034] rmi4_f01 rmi4-00.fn01: found RMI device, manufacturer: Synaptics, product: Harpia, fw id: 2323763
227[ 7.154302] videodev: Linux video capture interface: v2.00
228[ 7.185512] input: Synaptics Harpia as /devices/rmi4-00/input/input3
229[ 7.204373] qcom,pm8916-wcd-spmi-codec 200f000.spmi:pm8916@1:codec@f000: PMIC REV: 1 CODEC Version: 1
230[ 7.205310] qcom,pm8916-wcd-spmi-codec 200f000.spmi:pm8916@1:codec@f000: ASoC: sink widget PDM_RX1 overwritten
231[ 7.205494] qcom,pm8916-wcd-spmi-codec 200f000.spmi:pm8916@1:codec@f000: ASoC: source widget PDM_RX1 overwritten
232[ 7.205532] qcom,pm8916-wcd-spmi-codec 200f000.spmi:pm8916@1:codec@f000: ASoC: source widget PDM_RX1 overwritten
233[ 7.205545] qcom,pm8916-wcd-spmi-codec 200f000.spmi:pm8916@1:codec@f000: ASoC: sink widget PDM_RX1 overwritten
234[ 7.205561] qcom,pm8916-wcd-spmi-codec 200f000.spmi:pm8916@1:codec@f000: ASoC: sink widget PDM_RX1 overwritten
235[ 7.205577] qcom,pm8916-wcd-spmi-codec 200f000.spmi:pm8916@1:codec@f000: ASoC: sink widget ADC1 overwritten
236[ 7.205596] qcom,pm8916-wcd-spmi-codec 200f000.spmi:pm8916@1:codec@f000: ASoC: sink widget ADC1 overwritten
237[ 7.205612] qcom,pm8916-wcd-spmi-codec 200f000.spmi:pm8916@1:codec@f000: ASoC: sink widget PDM_RX1 overwritten
238[ 7.205777] qcom,pm8916-wcd-spmi-codec 200f000.spmi:pm8916@1:codec@f000: ASoC: source widget PDM_RX3 overwritten
239[ 7.205846] debugfs: Directory '7708000.lpass' with parent 'msm8916' already present!
240[ 7.207181] qcom-apq8016-sbc 7702000.sound: multicodec <-> Primary MI2S mapping ok
241[ 7.207447] qcom-apq8016-sbc 7702000.sound: multicodec <-> Tertiary MI2S mapping ok
242[ 7.207515] qcom-apq8016-sbc 7702000.sound: ASoC: no source widget found for MIC BIAS External
243[ 7.207528] qcom-apq8016-sbc 7702000.sound: ASoC: Failed to add route MIC BIAS External -> direct -> AMIC1
244[ 7.207556] qcom-apq8016-sbc 7702000.sound: ASoC: no source widget found for MIC BIAS External
245[ 7.207561] qcom-apq8016-sbc 7702000.sound: ASoC: Failed to add route MIC BIAS External -> direct -> AMIC3
246[ 7.232407] qcom_wcnss_ctrl remoteproc0:smd-edge.WCNSS_CTRL.-1.-1: WCNSS Version 1.5 1.2
247[ 7.264050] qcom-venus 1d00000.video-codec: Adding to iommu group 0
248[ 7.948469] adreno 1c00000.gpu: Adding to iommu group 1
249[ 7.949558] msm_mdp 1a01000.mdp: Adding to iommu group 2
250[ 7.949670] msm_mdp 1a01000.mdp: No interconnect support may cause display underflows!
251[ 7.952441] msm 1a00000.mdss: 1a00000.mdss supply vdd not found, using dummy regulator
252[ 7.952952] msm_mdp 1a01000.mdp: [drm:mdp5_bind [msm]] MDP5 version v1.6
253[ 7.953096] msm 1a00000.mdss: bound 1a01000.mdp (ops mdp5_ops [msm])
254[ 7.953174] msm_dsi 1a98000.dsi: 1a98000.dsi supply gdsc not found, using dummy regulator
255[ 7.953395] msm_dsi 1a98000.dsi: 1a98000.dsi supply gdsc not found, using dummy regulator
256[ 7.953879] msm_dsi_manager_register: failed to register mipi dsi host for DSI 0
257[ 7.954235] msm 1a00000.mdss: failed to bind 1a98000.dsi (ops dsi_ops [msm]): -517
258[ 7.954375] msm 1a00000.mdss: master bind failed: -517
259[ 7.954496] platform 1a01000.mdp: Removing from iommu group 2
260[ 7.954541] ------------[ cut here ]------------
261[ 7.954553] WARNING: CPU: 1 PID: 994 at drivers/iommu/qcom_iommu.c:348 qcom_iommu_domain_free+0x5c/0x70
262[ 7.954556] Modules linked in: msm(+) venus_dec venus_enc videobuf2_dma_sg videobuf2_memops venus_core wcnss_ctrl qrtr_smd v4l2_mem2mem snd_soc_apq8016_sbc videobuf2_v4l2 videobuf2_common videodev drm_kms_helper snd_soc_msm8916_analog snd_soc_msm8916_digital snd_soc_lpass_apq8016 snd_soc_lpass_cpu snd_soc_lpass_platform snd_soc_core syscopyarea ipv6 sysfillrect sysimgblt fb_sys_fops drm snd_compress snd_pcm bma180 qrtr industrialio_triggered_buffer qcom_spmi_temp_alarm mc rmi_i2c qcom_spmi_vadc kfifo_buf qcom_wcnss_pil qcom_vadc_common industrialio rmi_core qcom_common snd_timer qcom_glink_smem qcom_glink_native snd qcom_sysmon qmi_helpers nf_defrag_ipv6 soundcore mdt_loader drm_panel_orientation_quirks rmtfs_mem
263[ 7.954642] CPU: 1 PID: 994 Comm: udevd Not tainted 5.5.0-rc7-postmarketos-qcom-msm8916 #8
264[ 7.954645] Hardware name: Motorola Moto G4 Play (harpia) (DT)
265[ 7.954650] pstate: 00000005 (nzcv daif -PAN -UAO)
266[ 7.954655] pc : qcom_iommu_domain_free+0x5c/0x70
267[ 7.954662] lr : iommu_group_release+0x48/0x80
268[ 7.954664] sp : ffff8000130935c0
269[ 7.954667] x29: ffff8000130935c0 x28: ffff800013e01000
270[ 7.954673] x27: 0000000000000100 x26: ffff800010146940
271[ 7.954678] x25: ffff00006ffee880 x24: 0000000000000003
272[ 7.954684] x23: ffff000077935c10 x22: ffff000079813458
273[ 7.954689] x21: ffff00007a388380 x20: ffff00007a388500
274[ 7.954695] x19: ffff000079813400 x18: 0000000000000001
275[ 7.954700] x17: 0000000000000000 x16: 0000000000000000
276[ 7.954705] x15: 0000000000000004 x14: ffff800010ba5108
277[ 7.954711] x13: 0000000000000000 x12: ffff000079e19818
278[ 7.954716] x11: ffff000079e196d0 x10: 0000000000000000
279[ 7.954722] x9 : ffff00007d41ed18 x8 : ffff00007d41ed10
280[ 7.954727] x7 : 0000000040040000 x6 : 0000000000210d00
281[ 7.954733] x5 : ffff00007d6b99d0 x4 : 0000000000000000
282[ 7.954738] x3 : 0000000000000000 x2 : 0000000000000000
283[ 7.954743] x1 : ffff00007af75780 x0 : ffff00007a388530
284[ 7.954748] Call trace:
285[ 7.954754] qcom_iommu_domain_free+0x5c/0x70
286[ 7.954758] iommu_group_release+0x48/0x80
287[ 7.954766] kobject_put+0x94/0x228
288[ 7.954770] kobject_del+0x50/0x68
289[ 7.954775] kobject_put+0x7c/0x228
290[ 7.954781] iommu_group_remove_device+0xd8/0xe8
291[ 7.954785] qcom_iommu_remove_device+0x44/0x60
292[ 7.954790] iommu_release_device+0x28/0x40
293[ 7.954795] iommu_bus_notifier+0xac/0xc0
294[ 7.954801] notifier_call_chain+0x58/0x98
295[ 7.954807] blocking_notifier_call_chain+0x54/0x78
296[ 7.954812] device_del+0x26c/0x398
297[ 7.954817] platform_device_del.part.0+0x18/0x88
298[ 7.954822] platform_device_unregister+0x20/0x38
299[ 7.954829] of_platform_device_destroy+0xdc/0xf0
300[ 7.954834] device_for_each_child+0x58/0xa0
301[ 7.954839] of_platform_depopulate+0x38/0x78
302[ 7.954956] msm_pdev_probe+0x1c0/0x308 [msm]
303[ 7.954962] platform_drv_probe+0x50/0xa0
304[ 7.954966] really_probe+0xd8/0x428
305[ 7.954971] driver_probe_device+0xdc/0x130
306[ 7.954975] device_driver_attach+0x6c/0x78
307[ 7.954979] __driver_attach+0x9c/0x168
308[ 7.954986] bus_for_each_dev+0x6c/0xc0
309[ 7.954990] driver_attach+0x20/0x28
310[ 7.954996] bus_add_driver+0x138/0x218
311[ 7.955000] driver_register+0x60/0x110
312[ 7.955005] __platform_driver_register+0x44/0x50
313[ 7.955111] msm_drm_register+0x54/0x68 [msm]
314[ 7.955117] do_one_initcall+0x50/0x190
315[ 7.955123] do_init_module+0x50/0x208
316[ 7.955127] load_module+0x1eb8/0x2498
317[ 7.955132] __do_sys_init_module+0x200/0x2b8
318[ 7.955136] __arm64_sys_init_module+0x18/0x20
319[ 7.955143] el0_svc_common.constprop.0+0x68/0x160
320[ 7.955148] el0_svc_handler+0x20/0x80
321[ 7.955154] el0_sync_handler+0x10c/0x180
322[ 7.955158] el0_sync+0x140/0x180
323[ 7.955162] ---[ end trace 35f85a151035be0e ]---
324[ 7.956932] msm_mdp 1a01000.mdp: Adding to iommu group 2
325[ 7.957032] msm_mdp 1a01000.mdp: No interconnect support may cause display underflows!
326[ 7.959687] msm 1a00000.mdss: 1a00000.mdss supply vdd not found, using dummy regulator
327[ 7.960122] msm_mdp 1a01000.mdp: [drm:mdp5_bind [msm]] MDP5 version v1.6
328[ 7.960271] msm 1a00000.mdss: bound 1a01000.mdp (ops mdp5_ops [msm])
329[ 7.960345] msm_dsi 1a98000.dsi: 1a98000.dsi supply gdsc not found, using dummy regulator
330[ 7.960482] msm_dsi 1a98000.dsi: 1a98000.dsi supply gdsc not found, using dummy regulator
331[ 7.960821] msm_dsi_manager_register: failed to register mipi dsi host for DSI 0
332[ 7.961142] msm 1a00000.mdss: failed to bind 1a98000.dsi (ops dsi_ops [msm]): -517
333[ 7.961280] msm 1a00000.mdss: master bind failed: -517
334[ 8.852528] EXT4-fs (dm-1): re-mounted. Opts: data=ordered
335[ 8.946171] EXT4-fs (dm-0): mounting ext2 file system using the ext4 subsystem
336[ 8.948043] EXT4-fs (dm-0): mounted filesystem without journal. Opts: (null)
337[ 8.948068] ext2 filesystem being mounted at /boot supports timestamps until 2038 (0x7fffffff)
338[ 9.347359] cfg80211: Loading compiled-in X.509 certificates for regulatory database
339[ 9.356422] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
340[ 9.356590] platform regulatory.0: Direct firmware load for regulatory.db failed with error -2
341[ 9.356596] cfg80211: failed to load regulatory.db
342[ 9.432880] Bluetooth: Core ver 2.22
343[ 9.432977] NET: Registered protocol family 31
344[ 9.432981] Bluetooth: HCI device and connection manager initialized
345[ 9.432996] Bluetooth: HCI socket layer initialized
346[ 9.433004] Bluetooth: L2CAP socket layer initialized
347[ 9.433024] Bluetooth: SCO socket layer initialized
348[ 9.465137] msm 1a00000.mdss: 1a00000.mdss supply vdd not found, using dummy regulator
349[ 9.465636] msm_mdp 1a01000.mdp: [drm:mdp5_bind [msm]] MDP5 version v1.6
350[ 9.465784] msm 1a00000.mdss: bound 1a01000.mdp (ops mdp5_ops [msm])
351[ 9.465873] msm_dsi 1a98000.dsi: 1a98000.dsi supply gdsc not found, using dummy regulator
352[ 9.466039] msm_dsi 1a98000.dsi: 1a98000.dsi supply gdsc not found, using dummy regulator
353[ 9.467018] msm 1a00000.mdss: bound 1a98000.dsi (ops dsi_ops [msm])
354[ 9.467311] adreno 1c00000.gpu: 1c00000.gpu supply vdd not found, using dummy regulator
355[ 9.467378] adreno 1c00000.gpu: 1c00000.gpu supply vddcx not found, using dummy regulator
356[ 9.467545] msm 1a00000.mdss: [drm:msm_gpu_init [msm]] A306: using IOMMU
357[ 9.467823] msm 1a00000.mdss: bound 1c00000.gpu (ops a3xx_ops [msm])
358[ 9.481852] urandom_read: 5 callbacks suppressed
359[ 9.481859] random: dbus-daemon: uninitialized urandom read (12 bytes read)
360[ 9.486070] msm 1a00000.mdss: fall back to the other CTL category for INTF 1!
361[ 9.486566] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
362[ 9.486571] [drm] Driver supports precise vblank timestamp query.
363[ 9.487272] [drm] Initialized msm 1.5.0 20130625 for 1a00000.mdss on minor 0
364[ 9.494196] msm 1a00000.mdss: [drm:adreno_request_fw [msm]] loaded qcom/a300_pm4.fw from new location
365[ 9.494751] msm 1a00000.mdss: [drm:adreno_request_fw [msm]] loaded qcom/a300_pfp.fw from new location
366[ 9.509307] random: dbus-daemon: uninitialized urandom read (12 bytes read)
367[ 9.729960] [drm:mdp5_irq_error_handler [msm]] *ERROR* errors: 04000000
368[ 9.762666] Console: switching to colour frame buffer device 90x80
369[ 9.778648] msm 1a00000.mdss: fb0: msmdrmfb frame buffer device
370[ 10.030175] elogind-daemon[1546]: Failed to create inotify watch on /dev/null/utmp, ignoring: Not a directory
371[ 10.035996] elogind-daemon[1546]: New seat seat0.
372[ 10.038048] elogind-daemon[1546]: Watching system buttons on /dev/input/event0 (pm8941_pwrkey)
373[ 10.072579] wcn36xx: mac address: 02:00:7d:1f:f2:be
374[ 10.149624] elogind-daemon[1546]: Failed to set utmp path to /dev/null/utmp: Not supported
375[ 10.222363] wcn36xx: firmware WLAN version 'WCN v2.0 RadioPhy vRhea_GF_1.12 with 19.2MHz XO' and CRM version 'CNSS-PR-2-0-1-1-c1-00155'
376[ 10.222372] wcn36xx: firmware API 1.5.1.2, 41 stations, 2 bssids
377[ 10.700645] elogind-daemon[1546]: Failed to create inotify watch on /dev/null/utmp, ignoring: Not a directory
378[ 10.701949] elogind-daemon[1546]: New session c1 of user user.
379[ 10.708818] elogind-daemon[1546]: Failed to apply ACLs: Not supported
380[ 10.838465] elogind-uaccess-command[1585]: Failed to apply ACL on /dev/dri/card0: Not supported
381[ 10.838498] elogind-uaccess-command[1585]: Failed to reset ACL on /dev/dri/card0: Not supported
382[ 10.963094] random: crng init done
383[ 11.294411] rfkill: input handler disabled
384[ 11.569670] Bluetooth: hci0: command 0xfc0b tx timeout
385[ 175.474809] wlan0: authenticate with 10:13:31:d9:a2:a1
386[ 175.517564] wlan0: send auth to 10:13:31:d9:a2:a1 (try 1/3)
387[ 175.553397] wlan0: authenticated
388[ 175.556942] wlan0: associate with 10:13:31:d9:a2:a1 (try 1/3)
389[ 175.560684] wlan0: RX AssocResp from 10:13:31:d9:a2:a1 (capab=0x1411 status=0 aid=2)
390[ 175.593930] wlan0: associated
391[ 175.726841] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
392[ 175.868807] 8021q: 802.1Q VLAN Support v1.8
393[ 179.730739] wlan0: deauthenticated from 10:13:31:d9:a2:a1 (Reason: 2=PREV_AUTH_NOT_VALID)
394[ 179.813749] wcn36xx: ERROR SMD_EVENT (312) not supported
395[ 180.709973] wlan0: authenticate with 10:13:31:d9:a2:a1
396[ 180.752265] wlan0: send auth to 10:13:31:d9:a2:a1 (try 1/3)
397[ 180.757291] wlan0: authenticated
398[ 180.765318] wlan0: associate with 10:13:31:d9:a2:a1 (try 1/3)
399[ 180.768988] wlan0: RX AssocResp from 10:13:31:d9:a2:a1 (capab=0x1411 status=0 aid=2)
400[ 180.802335] wlan0: associated