q7VDySrD

1
2Format: Log Type - Time(microsec) - Message - Optional Info
3Log Type: B - Since Boot(Power On Reset),  D - Delta,  S - Statistic
4S - QC_IMAGE_VERSION_STRING=BOOT.BF.3.3.2-00064
5S - IMAGE_VARIANT_STRING=JAASANAZA
6S - OEM_IMAGE_VERSION_STRING=JEFFERY-PC
7S - Secure Boot: Off
8S - JTAG ID @ 0x000a4120 = 0x5480009a
9S - Serial Number @ 0x000a4128 = 0x540cd66e
10S - OEM Config Row 0 @ 0x000a4150 = 0x0000000030000000
11S - OEM Config Row 1 @ 0x000a4158 = 0x0000000000000000
12S - Feature Config Row 0 @ 0x000a4160 = 0x0107a04000100100
13S - Feature Config Row 1 @ 0x000a4168 = 0x02c2f80305000805
14S - Boot Config, 0x000000e1
15B -       269 - PBL, Start
16B -      3142 - bootable_media_detect_entry, Start
17B -    159729 - bootable_media_detect_success, Start
18B -    159734 - elf_loader_entry, Start
19B -    161329 - auth_hash_seg_entry, Start
20B -    161620 - auth_hash_seg_exit, Start
21B -    195635 - elf_segs_hash_verify_entry, Start
22B -    346505 - PBL, End
23B -    288743 - SBL1, Start
24B -    357094 - pm_device_init, Start
25B -    359534 - PON REASON: PM0=0x80
26B -    359686 - pm_sbl_pre_config:Done
27B -    375699 - PM_SET_VAL:Skip
28D -     19825 - pm_device_init, Delta
29B -    376949 - usb: hs_phy_nondrive_start
30B -    379847 - usb: hs_phy_nondrive_finish
31B -    383385 - boot_flash_init, Start
32D -         0 - boot_flash_init, Delta
33B -    390278 - boot_config_data_table_init, Start
34D -      4575 - boot_config_data_table_init, Delta - (0 Bytes)
35B -    400221 - CDT version:3,Platform ID:8,Major ID:1,Minor ID:0,Subtype:0
36B -    407175 - sbl1_ddr_set_params, Start
37B -    411536 - cpr_init, Start
38D -      1128 - cpr_init, Delta
39B -    416477 - Pre_DDR_clock_init, Start
40D -       213 - Pre_DDR_clock_init, Delta
41D -         0 - sbl1_ddr_set_params, Delta
42B -    429257 - do ddr sanity test, Start
43D -       305 - do ddr sanity test, Delta
44B -    435296 - pm_driver_init, Start
45B -    440877 - PM: INFO: pm_sbl_chg_init
46B -    442341 - charger module absent, it's by design if using external charger
47D -     10919 - pm_driver_init, Delta
48B -    456432 - DDR Training restore, Start
49B -    458476 - DDR Training restore, End
50B -    468297 - clock_init, Start
51D -       183 - clock_init, Delta
52B -    468571 - Image Load, Start
53D -     83692 - QSEE Image Loaded, Delta - (1523236 Bytes)
54B -    552294 - Image Load, Start
55D -       305 - SEC Image Loaded, Delta - (2048 Bytes)
56B -    559614 - PM0: PON1=0x80:KPDPWR_N
57B -    562694 - sbl1_efs_handle_cookies, Start
58D -       579 - sbl1_efs_handle_cookies, Delta
59B -    570960 - Image Load, Start
60D -     10980 - DEVCFG Image Loaded, Delta - (34452 Bytes)
61B -    582428 - Image Load, Start
62D -     19123 - RPM Image Loaded, Delta - (170576 Bytes)
63B -    601582 - Image Load, Start
64D -     57889 - APPSBL Image Loaded, Delta - (710260 Bytes)
65B -    659501 - QSEE Execution, Start
66D -        61 - QSEE Execution, Delta
67B -    665174 - USB D+ check, Start
68B -    670420 - usb: PMIC vbus detect failed
69D -      3904 - USB D+ check, Delta
70B -    675605 - SBL1, End
71D -    389211 - SBL1, Delta
72S - Flash Throughput, 30000 KB/s  (2443668 Bytes,  79075 us)
73S - DDR Frequency, 931 MHz
74S - Core 0 Frequency, 800 MHz
75Android Bootloader - UART_DM Initialized!!!
76[0] welcome to lk
77
78[10] platform_init()
79[10] Eric platform_detect() is 0000000a
80[10] Eric board.platform is 00000152
81[10] Eric board.platform_version is 00010001
82[20] Eric board.platform_hw is 00000008
83[20] Eric board.platform_subtype  is 00000000
84[20] Eric board.target  is 00010008
85[30] Eric board.foundry_id is 00000003
86[30] Eric board.pmic[0] is 00010016
87[30] Eric board.pmic[1] is 00000000
88[40] Eric board.pmic[2] is 00000000
89[40] Eric board.pmic[3] is 00000000
90[40] target_init()
91[80] SDHC Running in HS400 mode
92[90] Done initialization of the card
93[90] pm8x41_get_is_cold_boot: cold boot
94[90] Going down for shutdown.
95
96Format: Log Type - Time(microsec) - Message - Optional Info
97Log Type: B - Since Boot(Power On Reset),  D - Delta,  S - Statistic
98S - QC_IMAGE_VERSION_STRING=BOOT.BF.3.3.2-00064
99S - IMAGE_VARIANT_STRING=JAASANAZA
100S - OEM_IMAGE_VERSION_STRING=JEFFERY-PC
101S - Secure Boot: Off
102S - JTAG ID @ 0x000a4120 = 0x5480009a
103S - Serial Number @ 0x000a4128 = 0x540cd66e
104S - OEM Config Row 0 @ 0x000a4150 = 0x0000000030000000
105S - OEM Config Row 1 @ 0x000a4158 = 0x0000000000000000
106S - Feature Config Row 0 @ 0x000a4160 = 0x0107a04000100100
107S - Feature Config Row 1 @ 0x000a4168 = 0x02c2f80305000805
108S - Boot Config, 0x000000e1
109B -       269 - PBL, Start
110B -      3105 - bootable_media_detect_entry, Start
111B -     90769 - bootable_media_detect_success, Start
112B -     90775 - elf_loader_entry, Start
113B -     92364 - auth_hash_seg_entry, Start
114B -     92656 - auth_hash_seg_exit, Start
115B -    126526 - elf_segs_hash_verify_entry, Start
116B -    276064 - PBL, End
117B -    288530 - SBL1, Start
118B -    373686 - pm_device_init, Start
119B -    376705 - PON REASON: PM0=0x200000080
120B -    377559 - pm_sbl_pre_config:Done
121B -    394395 - PM_SET_VAL:Skip
122D -     21929 - pm_device_init, Delta
123B -    395676 - usb: hs_phy_nondrive_start
124B -    398574 - usb: hs_phy_nondrive_finish
125B -    402112 - boot_flash_init, Start
126D -         0 - boot_flash_init, Delta
127B -    409005 - boot_config_data_table_init, Start
128D -      4605 - boot_config_data_table_init, Delta - (0 Bytes)
129B -    418978 - CDT version:3,Platform ID:8,Major ID:1,Minor ID:0,Subtype:0
130B -    425841 - sbl1_ddr_set_params, Start
131B -    430263 - cpr_init, Start
132D -      1128 - cpr_init, Delta
133B -    435204 - Pre_DDR_clock_init, Start
134D -       213 - Pre_DDR_clock_init, Delta
135D -         0 - sbl1_ddr_set_params, Delta
136B -    448014 - do ddr sanity test, Start
137D -       335 - do ddr sanity test, Delta
138B -    454053 - pm_driver_init, Start
139B -    459635 - PM: INFO: pm_sbl_chg_init
140B -    461099 - charger module absent, it's by design if using external charger
141D -     10919 - pm_driver_init, Delta
142B -    475190 - DDR Training restore, Start
143B -    477142 - DDR Training restore, End
144B -    487115 - clock_init, Start
145D -       183 - clock_init, Delta
146B -    487390 - Image Load, Start
147D -     83783 - QSEE Image Loaded, Delta - (1523236 Bytes)
148B -    571204 - Image Load, Start
149D -       305 - SEC Image Loaded, Delta - (2048 Bytes)
150B -    578554 - PM0: PON1=0x80:KPDPWR_N | POFF1=0x2:PS_HOLD
151B -    583404 - sbl1_efs_handle_cookies, Start
152D -       579 - sbl1_efs_handle_cookies, Delta
153B -    591608 - Image Load, Start
154D -     10980 - DEVCFG Image Loaded, Delta - (34452 Bytes)
155B -    603046 - Image Load, Start
156D -     19123 - RPM Image Loaded, Delta - (170576 Bytes)
157B -    622200 - Image Load, Start
158D -     57889 - APPSBL Image Loaded, Delta - (710260 Bytes)
159B -    680119 - QSEE Execution, Start
160D -        61 - QSEE Execution, Delta
161B -    685823 - USB D+ check, Start
162B -    691038 - usb: PMIC vbus detect failed
163D -      3873 - USB D+ check, Delta
164B -    696223 - SBL1, End
165D -    410042 - SBL1, Delta
166S - Flash Throughput, 30000 KB/s  (2443668 Bytes,  79015 us)
167S - DDR Frequency, 931 MHz
168S - Core 0 Frequency, 800 MHz
169Android Bootloader - UART_DM Initialized!!!
170[0] welcome to lk
171
172[10] platform_init()
173[10] Eric platform_detect() is 0000000a
174[10] Eric board.platform is 00000152
175[10] Eric board.platform_version is 00010001
176[20] Eric board.platform_hw is 00000008
177[20] Eric board.platform_subtype  is 00000000
178[20] Eric board.target  is 00010008
179[30] Eric board.foundry_id is 00000003
180[30] Eric board.pmic[0] is 00010016
181[30] Eric board.pmic[1] is 00000000
182[40] Eric board.pmic[2] is 00000000
183[40] Eric board.pmic[3] is 00000000
184[40] target_init()
185[80] SDHC Running in HS400 mode
186[90] Done initialization of the card
187[90] pm8x41_get_is_cold_boot: cold boot
188[90] Qseecom Init Done in Appsbl version is 0x1001000
189[100] secure app region addr=0x85b00000 size=0x800000[100] TZ App region notif returned with status:0 addr:85b00000 size:800000
190[110] TZ App log region register returned with status:0 addr:8f17f000 size:4096
191[110] Qseecom TZ Init Done in Appsbl
192[130] Loading cmnlib done
193[140] Loading cmnlib64 done
194[150] qseecom_start_app: Loading app keymaster for the first time'
195[170] <8>keymaster64: KEYMASTER Init
196[170] Waiting for the RPM to populate smd channel table
197[190] hw_id is 8 platform_subtype is 0
198[190] Not able to search the panel:
199[190] panel_operating_mode=0x0
200[750] Config MIPI_VIDEO_PANEL.
201[900] dsi panel init error
202[900] Turn off MIPI_VIDEO_PANEL.
203[1160] hw_id is 8 platform_subtype is 0
204[1160] Not able to search the panel:
205[1160] panel_operating_mode=0x0
206[1760] Config MIPI_VIDEO_PANEL.
207[1890] Turn on MIPI_VIDEO_PANEL.
208[1910] Video lane tested successfully
209CTRL+C: enter instruction mode......
210CTRL+C: out instruction mode
211aboot_init char: [2950] pm8x41_get_is_cold_boot: cold boot
212[2950] Recovery command: 32 normal1
213[2950] Unable to locate /bootselect partition
214[2960] BootImage Header: 1
215[2960] Loading (boot) image (67108864): start
216[3180] Loading (boot) image (67108864): done
217[3180] use_signed_kernel=1, is_unlocked=1, is_tampered=0.
218[3210] Booting Into Mission Mode
219[3210] MultiSlot false, partition name boot
220[3220] AVB version 2
221[3220] avb_slot_verify.c[3220] :[3220] 417[3220] : DEBUG: [3220] Loading vbmeta struct from partition '[3230] vbmeta[3230] '.
222[3240] ValidateVbmetaPublicKey PublicKeyLength 1032, PublicKeyMetadataLength 0
223[3250] ValidateVbmetaPublicKey OutIsTrusted 1, UserKey 0
224[3250] ReadRollbackIndex Location 0, RollbackIndex 0
225[3260] avb_slot_verify.c[3260] :[3260] 417[3260] : DEBUG: [3260] Loading vbmeta struct from partition '[3260] system[3270] '.
226[3270] negative Offset (-64) converted to (0xbfffffc0)
227[3270] read from system, 0x40 bytes at Offset 0xbfffffc0, partition size 559022080
228[3280] StartBlock 0x5fffff, ReadOffset 0x1c0, read_size 0x40
229[3280] read from system, 0x740 bytes at Offset 0xbff5b000, partition size 559022080
230[3290] LastBlock 0x5ffadb, ReadOffset 0x0, read_size 0x140
231[3300] ReadRollbackIndex Location 2, RollbackIndex 0
232[3300] avb_slot_verify.c[3310] :[3310] 157[3310] : DEBUG: [3310] boot[3310] : Loading entire partition.
233[3420] avb_slot_verify.c[3420] :[3420] 236[3430] : DEBUG: [3430] boot[3430] : success: Image verification completed.
234[3430] avb_slot_verify.c[3430] :[3430] 157[3440] : DEBUG: [3440] dtbo[3440] : Loading entire partition.
235[3450] avb_slot_verify.c[3450] :[3450] 236[3450] : DEBUG: [3450] dtbo[3450] : success: Image verification completed.
236[3460] system uuid: e146bf7c-a200-bcaf-f494-93511eb5ca30
237[3460] boot uuid: 90b67635-1902-81d1-2de4-00f7b0a02411
238[3460] vbmeta uuid: ece22704-9df8-cf44-79ff-896b081a0d62
239[3470] State: Unlocked, AvbSlotVerify returned OK, continue boot
240[3480] Requested Partition: boot
241[3480] Loaded Partition: boot
242[3480] Requested Partition: dtbo
243[3480] Loaded Partition: boot
244[3490] Loaded Partition: dtbo
245[3490] Total loaded partition 3
246[3490] boot_verifier: Device is in ORANGE boot state.
247[3500] Device is unlocked! Skipping verification...
248[3500] LK SEC APP Handle: 0x1
249[3510] <8>keymaster64: cmd_id=SET_ROT begin
250[3510] <8>keymaster64: Error: qsee_cfg_getpropval in get_enable_set_bandwidth failed for enable_set_bandwidth, ret_size = 0
251[3520] <8>keymaster64: rot.data_length: 32
252[3520] <8>keymaster64: cmd_id=SET_ROT done with ret: 0 time taken: 1
253[3530] LK SEC APP Handle: 0x1
254[3530] <8>keymaster64: cmd_id=GET_VERSION begin
255[3540] Authentication Key not yet programmed
256[3540] <8>keymaster64: qsee_stor_device_init error ret: -14
257[3550] <8>keymaster64: cmd_id=GET_VERSION done with ret: 0 time taken: 12
258[3560] <8>keymaster64: cmd_id=SET_BOOT_STATE begin
259[3560] <8>keymaster64: is_unlocked: 1
260[3560] <8>keymaster64: color: 1
261[3570] <8>keymaster64: system_version: 90000
262[3570] <8>keymaster64: system_security_level 201810
263[3570] <8>keymaster64: cmd_id=SET_BOOT_STATE done with ret: 0 time taken: 0
264[3580] Sending Root of Trust to trustzone: end
265[3590] LK SEC APP Handle: 0x1
266[3590] <8>keymaster64: cmd_id=KEYMASTER_SET_VBH begin
267[3590] <8>keymaster64: cmd_id=KEYMASTER_SET_VBH done with ret: 0 time taken: 0
268[3600] VB2: Authenticate complete! boot state is: orange
269[3610] VB2: boot state: orange(1)
270[3610] Boot State is : 1
271[3610] userdebug Device will not DISPLAY_MENU_ORANGE
272[3620] decompressing kernel image: start
273[4290] decompressing kernel image: done
274[4320] dev_tree_appended: dtb_offset b6fba1
275[4320] dev_tree_appended: kernel_size f74b80
276[4320] DTBO Overlay count start: 168551
277[4330] Board SOC ID = 152 | DT SOC ID = 152
278[4330] Board SOC Rev = 10001 | DT SOC Rev =0
279[4340] Board Foundry id = 30000 | DT Foundry id = 0
280[4340] qcom,board-id does not exist (or)(-1) is not a multiple of (8)
281[4350] pmic_data[0]:10016
282[4350] pmic_data[1]:10011
283[4350] PMIC Model doesn't match
284[4350] Bestpmicinfo.dtmatchval : 0 | cur_pmic_info.dtmatchval: 40005
285[4360] Best pmic info 0x16/0x11/0x0/0x0 for current dt
286[4360] Best Match DTB VAL = 1004a005
287[4370] Board SOC ID = 152 | DT SOC ID = 152
288[4370] Board SOC Rev = 10001 | DT SOC Rev =0
289[4380] Board Foundry id = 30000 | DT Foundry id = 0
290[4380] qcom,board-id does not exist (or)(-1) is not a multiple of (8)
291[4390] pmic_data[0]:10016
292[4390] pmic_data[1]:25
293[4390] PMIC Model doesn't match
294[4390] Bestpmicinfo.dtmatchval : 0 | cur_pmic_info.dtmatchval: 40005
295[4400] Best pmic info 0x16/0x25/0x0/0x0 for current dt
296[4400] Best Match DTB VAL = 1004a005
297[4410] qcom,msm-id does not exist (or) is (-1) not a multiple of (8)
298[4410] qcom,board-id does not exist (or)(-1) is not a multiple of (8)
299[4420] qcom,pmic-id does not exit (or) is (-1) not a multiple of (8)
300[4430] Best Match DTB VAL = 1004a005
301[4430] Board SOC ID = 152 | DT SOC ID = 152
302[4430] Board SOC Rev = 10001 | DT SOC Rev =0
303[4440] Board Foundry id = 30000 | DT Foundry id = 0
304[4440] qcom,board-id does not exist (or)(-1) is not a multiple of (8)
305[4450] pmic_data[0]:10016
306[4450] pmic_data[1]:20037
307[4450] PMIC Model doesn't match
308[4460] Bestpmicinfo.dtmatchval : 0 | cur_pmic_info.dtmatchval: 40005
309[4460] Best pmic info 0x16/0x37/0x0/0x0 for current dt
310[4470] Best Match DTB VAL = 1004a005
311[4470] Board SOC ID = 152 | DT SOC ID = 15f
312[4470] qcom,msm-id does not match
313[4480] Best Match DTB VAL = 1004a005
314[4480] qcom,msm-id does not exist (or) is (-1) not a multiple of (8)
315[4490] qcom,board-id does not exist (or)(-1) is not a multiple of (8)
316[4490] qcom,pmic-id does not exit (or) is (-1) not a multiple of (8)
317[4500] Best Match DTB VAL = 1004a005
318[4500] Board SOC ID = 152 | DT SOC ID = 125
319[4510] qcom,msm-id does not match
320[4510] Best Match DTB VAL = 1004a005
321[4510] Board SOC ID = 152 | DT SOC ID = 152
322[4520] Board SOC Rev = 10001 | DT SOC Rev =0
323[4520] Board Foundry id = 30000 | DT Foundry id = 0
324[4520] qcom,board-id does not exist (or)(-1) is not a multiple of (8)
325[4530] pmic_data[0]:10016
326[4530] pmic_data[1]:0
327[4530] pmic_data[2]:0
328[4540] pmic_data[3]:0
329[4540] Bestpmicinfo.dtmatchval : 0 | cur_pmic_info.dtmatchval: 1540154
330[4550] Best pmic info 0x16/0x0/0x0/0x0 for current dt
331[4550] Best Match DTB VAL = 1154a154
332[4550] Board SOC ID = 152 | DT SOC ID = 125
333[4560] qcom,msm-id does not match
334[4560] Best Match DTB VAL = 1154a154
335[4560] Board SOC ID = 152 | DT SOC ID = 152
336[4570] Board SOC Rev = 10001 | DT SOC Rev =0
337[4570] Board Foundry id = 30000 | DT Foundry id = 0
338[4580] qcom,board-id does not exist (or)(-1) is not a multiple of (8)
339[4580] pmic_data[0]:10016
340[4580] pmic_data[1]:20040
341[4590] PMIC Model doesn't match
342[4590] Bestpmicinfo.dtmatchval : 0 | cur_pmic_info.dtmatchval: 40005
343[4600] Best pmic info 0x16/0x40/0x0/0x0 for current dt
344[4600] Best Match DTB VAL = 1154a154
345[4600] Board SOC ID = 152 | DT SOC ID = 15d
346[4610] qcom,msm-id does not match
347[4610] Best Match DTB VAL = 1154a154
348[4610] Board SOC ID = 152 | DT SOC ID = 125
349[4620] qcom,msm-id does not match
350[4620] Best Match DTB VAL = 1154a154
351[4620] Board SOC ID = 152 | DT SOC ID = 130
352[4630] qcom,msm-id does not match
353[4630] Best Match DTB VAL = 1154a154
354[4630] qcom,msm-id does not exist (or) is (-1) not a multiple of (8)
355[4640] qcom,board-id does not exist (or)(-1) is not a multiple of (8)
356[4650] qcom,pmic-id does not exit (or) is (-1) not a multiple of (8)
357[4650] Best Match DTB VAL = 1154a154
358[4660] Board SOC ID = 152 | DT SOC ID = 15f
359[4660] qcom,msm-id does not match
360[4660] Best Match DTB VAL = 1154a154
361[4670] qcom,msm-id does not exist (or) is (-1) not a multiple of (8)
362[4670] qcom,board-id does not exist (or)(-1) is not a multiple of (8)
363[4680] qcom,pmic-id does not exit (or) is (-1) not a multiple of (8)
364[4680] Best Match DTB VAL = 1154a154
365[4690] Board SOC ID = 152 | DT SOC ID = 15d
366[4690] qcom,msm-id does not match
367[4700] Best Match DTB VAL = 1154a154
368[4700] Board SOC ID = 152 | DT SOC ID = 125
369[4700] qcom,msm-id does not match
370[4710] Best Match DTB VAL = 1154a154
371[4710] qcom,msm-id does not exist (or) is (-1) not a multiple of (8)
372[4710] qcom,board-id does not exist (or)(-1) is not a multiple of (8)
373[4720] qcom,pmic-id does not exit (or) is (-1) not a multiple of (8)
374[4730] Best Match DTB VAL = 1154a154
375[4730] qcom,msm-id does not exist (or) is (-1) not a multiple of (8)
376[4740] Board variant id = 8 | DT variant id = 15
377[4740] qcom,board-id doesnot match
378[4740] qcom,msm-id does not exist (or) is (-1) not a multiple of (8)
379[4750] Board variant id = 8 | DT variant id = 8
380[4750] Board platform subtype = 0 | DT platform subtype = 0
381[4760] qcom,pmic-id does not exit (or) is (-1) not a multiple of (8)
382[4770] qcom,msm-id does not exist (or) is (-1) not a multiple of (8)
383[4770] Board variant id = 8 | DT variant id = 8
384[4780] Board platform subtype = 0 | DT platform subtype = 4
385[4780] subtype id doesnot match
386[4780] qcom,msm-id does not exist (or) is (-1) not a multiple of (8)
387[4790] Board variant id = 8 | DT variant id = 8
388[4790] Board platform subtype = 0 | DT platform subtype = 1
389[4800] subtype id doesnot match
390[4800] qcom,msm-id does not exist (or) is (-1) not a multiple of (8)
391[4810] Board variant id = 8 | DT variant id = c
392[4810] qcom,board-id doesnot match
393[4820] qcom,msm-id does not exist (or) is (-1) not a multiple of (8)
394[4820] Board variant id = 8 | DT variant id = 15
395[4830] qcom,board-id doesnot match
396[4830] qcom,msm-id does not exist (or) is (-1) not a multiple of (8)
397[4840] Board variant id = 8 | DT variant id = 1
398[4840] qcom,board-id doesnot match
399[4840] qcom,msm-id does not exist (or) is (-1) not a multiple of (8)
400[4850] Board variant id = 8 | DT variant id = b
401[4850] qcom,board-id doesnot match
402[4860] qcom,msm-id does not exist (or) is (-1) not a multiple of (8)
403[4860] Board variant id = 8 | DT variant id = 15
404[4870] qcom,board-id doesnot match
405[4870] qcom,msm-id does not exist (or) is (-1) not a multiple of (8)
406[4880] Board variant id = 8 | DT variant id = 8
407[4880] Board platform subtype = 0 | DT platform subtype = 0
408[4890] qcom,pmic-id does not exit (or) is (-1) not a multiple of (8)
409[4890] qcom,msm-id does not exist (or) is (-1) not a multiple of (8)
410[4900] Board variant id = 8 | DT variant id = 8
411[4900] Board platform subtype = 0 | DT platform subtype = 3
412[4910] subtype id doesnot match
413[4910] qcom,msm-id does not exist (or) is (-1) not a multiple of (8)
414[4920] Board variant id = 8 | DT variant id = 1
415[4920] qcom,board-id doesnot match
416[4920] qcom,msm-id does not exist (or) is (-1) not a multiple of (8)
417[4930] Board variant id = 8 | DT variant id = 1
418[4930] qcom,board-id doesnot match
419[4940] qcom,msm-id does not exist (or) is (-1) not a multiple of (8)
420[4940] Board variant id = 8 | DT variant id = f
421[4950] qcom,board-id doesnot match
422[4950] qcom,msm-id does not exist (or) is (-1) not a multiple of (8)
423[4960] Board variant id = 8 | DT variant id = b
424[4960] qcom,board-id doesnot match
425[4960] qcom,msm-id does not exist (or) is (-1) not a multiple of (8)
426[4970] Board variant id = 8 | DT variant id = 8
427[4970] Board platform subtype = 0 | DT platform subtype = 2
428[4980] subtype id doesnot match
429[4980] qcom,msm-id does not exist (or) is (-1) not a multiple of (8)
430[4990] Board variant id = 8 | DT variant id = 1
431[4990] qcom,board-id doesnot match
432[5000] qcom,msm-id does not exist (or) is (-1) not a multiple of (8)
433[5000] Board variant id = 8 | DT variant id = b
434[5010] qcom,board-id doesnot match
435[5060] DTB overlay is successful
436[5070] DTBO Overlay count done: 192847
437[5070] UpdateCmdLine vbcmdline present len 814
438[5070] display kernel cmdline: mdss_mdp.panel=1:dsi:0:qcom,mdss_dsi_hx8394f_720p_video:1:none:cfg:single_dsi
439[5080] cmdline: console=ttyHSL0,115200,n8 androidboot.console=ttyHSL0 androidboot.hardware=qcom msm_rtb.filter=0x237 ehci-hcd.park=3 lpm_levels.sleep_disabled=1 androidboot.bootdevice=7824900.sdhci earlycon=msm_serial_dm,0x78af000 firmware_class.path=/vendor/fir[5110] Updating device tree: start
440[5340] kaslr-Seed is added to chosen node
441[5350] Updating device tree: done
442[5350] Turn off MIPI_VIDEO_PANEL.
443[5350] Continuous splash enabled, keeping panel alive.
444[5360] <8>keymaster64: cmd_id=MILESTONE_CALL begin
445[5360] <8>keymaster64: cmd_id=MILESTONE_CALL done with ret: 0 time taken: 0
446[5370] Success [5370] Qseecom De-Init Done in Appsbl
447[5380] free_verified_boot_resource
448[5380] booting linux @ 0x80080000, ramdisk @ 0x83600000 (0), tags/device tree @ 0x83400000
449[5380] Jumping to kernel via monitor
450[    0.000000] Booting Linux on physical CPU 0x0
451[    0.000000] Linux version 4.9.112 (ericwan@xac02) (gcc version 4.9.x 20150123 (prerelease) (GCC) ) #10 SMP PREEMPT Mon Oct 7 17:04:25 CST 2019
452[    0.000000] Boot CPU: AArch64 Processor [410fd034]
453[    0.000000] Machine: Qualcomm Technologies, Inc. SDM450 NOPMI MTP
454[    0.000000] core_ctl: disable_cpumask=0-7
455[    0.000000] earlycon: msm_serial_dm0 at MMIO 0x00000000078af000 (options '')
456[    0.000000] bootconsole [msm_serial_dm0] enabled
457[    0.000000] efi: Getting EFI parameters from FDT:
458[    0.000000] efi: UEFI not found.
459[    0.000000] Reserved memory: created CMA memory pool at 0x00000000ffc00000, size 4 MiB
460[    0.000000] OF: reserved mem: initialized node adsp_region@0, compatible id shared-dma-pool
461[    0.000000] Reserved memory: created CMA memory pool at 0x000000008f800000, size 8 MiB
462[    0.000000] OF: reserved mem: initialized node gpu_region@0, compatible id shared-dma-pool
463[    0.000000] Reserved memory: created CMA memory pool at 0x000000008f000000, size 8 MiB
464[    0.000000] OF: reserved mem: initialized node venus_region@0, compatible id shared-dma-pool
465[    0.000000] OF: reserved mem: invalid size property in 'mem_dump_region' node.
466[    0.000000] Reserved memory: created CMA memory pool at 0x00000000f4800000, size 180 MiB
467[    0.000000] OF: reserved mem: initialized node secure_region@0, compatible id shared-dma-pool
468[    0.000000] Reserved memory: created CMA memory pool at 0x00000000f3800000, size 16 MiB
469[    0.000000] OF: reserved mem: initialized node qseecom_region@0, compatible id shared-dma-pool
470[    0.000000] Reserved memory: created CMA memory pool at 0x00000000f3400000, size 4 MiB
471[    0.000000] OF: reserved mem: initialized node qseecom_ta_region, compatible id shared-dma-pool
472[    0.000000] Removed memory: created DMA memory pool at 0x0000000085b00000, size 13 MiB
473[    0.000000] OF: reserved mem: initialized node other_ext_region@0, compatible id removed-dma-pool
474[    0.000000] Removed memory: created DMA memory pool at 0x0000000086c00000, size 106 MiB
475[    0.000000] OF: reserved mem: initialized node modem_region@0, compatible id removed-dma-pool
476[    0.000000] Removed memory: created DMA memory pool at 0x000000008d600000, size 17 MiB
477[    0.000000] OF: reserved mem: initialized node adsp_fw_region@0, compatible id removed-dma-pool
478[    0.000000] Removed memory: created DMA memory pool at 0x000000008e700000, size 7 MiB
479[    0.000000] OF: reserved mem: initialized node wcnss_fw_region@0, compatible id removed-dma-pool
480[    0.000000] cma: Reserved 16 MiB at 0x00000000f2400000
481[    0.000000] psci: probing for conduit method from DT.
482[    0.000000] psci: PSCIv1.0 detected in firmware.
483[    0.000000] psci: Using standard PSCI v0.2 function IDs
484[    0.000000] psci: MIGRATE_INFO_TYPE not supported.
485[    0.000000] psci: SMC Calling Convention v1.0
486[    0.000000] Did not receive the expected number of bytes from PRNG: 0
487[    0.000000] percpu: Embedded 23 pages/cpu @ffffffdd71e07000 s56104 r8192 d29912 u94208
488[    0.000000] CPU features: enabling workaround for ARM erratum 845719
489[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 480060
490[    0.000000] Kernel command line: core_ctl_disable_cpumask=0-7 kpti=0 console=ttyHSL0,115200,n8 androidboot.console=ttyHSL0 androidboot.hardware=qcom msm_rtb.filter=0x237 ehci-hcd.park=3 lpm_levels.sleep_disabled=1 androidboot.bootdevice=7824900.sdhci earlycon=msm_serial_dm,0x78af000 firmware_class.path=/vendor/firmware_mnt/image androidboot.usbconfigfs=true loop.max_part=7 buildvariant=userdebug androidboot.emmc=true androidboot.verifiedbootstate=orange androidboot.keymaster=1 dm="1 vroot none ro 1,0 6192024 verity 1 PARTUUID=e146bf7c-a200-bcaf-f494-93511eb5ca30 PARTUUID=e146bf7c-a200-bcaf-f494-93511eb5ca30 4096 4096 774003 774003 sha1 92b7e152ca5bafcd6b043a4d29ac1ca084ada657 82c54ab345ec457dc4255f5fd453d897c0ce84a5 10 restart_on_corruption ignore_zero_blocks use_fec_from_device PARTUUID=e146bf7c-a200-bcaf-f494-93511eb5ca30 fec_roots 2 fec_blocks 780099 fec_start 780099" root=/dev/dm-0 androidboot.vbmeta.device=PARTUUID=ece22704-9df8-cf44-79ff-896b081a0d62 androidboot.vbmeta.avb_version
491[    0.000000] device-mapper: init: will configure 1 devices
492[    0.000000] log_buf_len individual max cpu contribution: 131072 bytes
493[    0.000000] log_buf_len total cpu_extra contributions: 917504 bytes
494[    0.000000] log_buf_len min size: 131072 bytes
495[    0.000000] log_buf_len: 1048576 bytes
496[    0.000000] early log buf free: 126188(96%)
497[    0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
498[    0.000000] Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes)
499[    0.000000] Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes)
500[    0.000000] Memory: 1601508K/1950720K available (17148K kernel code, 2264K rwdata, 7256K rodata, 6400K init, 9869K bss, 107548K reserved, 241664K cma-reserved)
501[    0.000000] Virtual kernel memory layout:
502[    0.000000]     modules : 0xffffff8000000000 - 0xffffff8008000000   (   128 MB)
503[    0.000000]     vmalloc : 0xffffff8008000000 - 0xffffffbebfff0000   (   250 GB)
504[    0.000000]       .text : 0xffffff9080680000 - 0xffffff9081740000   ( 17152 KB)
505[    0.000000]     .rodata : 0xffffff9081800000 - 0xffffff9081f20000   (  7296 KB)
506[    0.000000]       .init : 0xffffff9081f20000 - 0xffffff9082560000   (  6400 KB)
507[    0.000000]       .data : 0xffffff9082560000 - 0xffffff9082796200   (  2265 KB)
508[    0.000000]        .bss : 0xffffff9082796200 - 0xffffff9083139838   (  9870 KB)
509[    0.000000]     fixed   : 0xffffffbefe7fb000 - 0xffffffbefec00000   (  4116 KB)
510[    0.000000]     PCI I/O : 0xffffffbefee00000 - 0xffffffbeffe00000   (    16 MB)
511[    0.000000]     vmemmap : 0xffffffbf00000000 - 0xffffffc000000000   (     4 GB maximum)
512[    0.000000]               0xffffffbf74000000 - 0xffffffbf76000000   (    32 MB actual)
513[    0.000000]     memory  : 0xffffffdd00000000 - 0xffffffdd80000000   (  2048 MB)
514[    0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
515[    0.000000] Preemptible hierarchical RCU implementation.
516[    0.000000]  RCU dyntick-idle grace-period acceleration is enabled.
517[    0.000000]
518[    0.000000] **********************************************************
519[    0.000000] **   NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE   **
520[    0.000000] **                                                      **
521[    0.000000] ** trace_printk() being used. Allocating extra memory.  **
522[    0.000000] **                                                      **
523[    0.000000] ** This means that this is a DEBUG kernel and it is     **
524[    0.000000] ** unsafe for production use.                           **
525[    0.000000] **                                                      **
526[    0.000000] ** If you see this message and you are not debugging    **
527[    0.000000] ** the kernel, report this immediately to your vendor!  **
528[    0.000000] **                                                      **
529[    0.000000] **   NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE   **
530[    0.000000] **********************************************************
531[    0.000000] NR_IRQS:64 nr_irqs:64 0
532[    0.000000]  Offload RCU callbacks from all CPUs
533[    0.000000]  Offload RCU callbacks from CPUs: 0-7.
534[    0.000000] arm_arch_timer: Architected cp15 and mmio timer(s) running at 19.20MHz (virt/virt).
535[    0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x46d987e47, max_idle_ns: 440795202767 ns
536[    0.000006] sched_clock: 56 bits at 19MHz, resolution 52ns, wraps every 4398046511078ns
537[    0.010769] clocksource: Switched to clocksource arch_sys_counter
538[    0.028864] allocated 12582912 bytes of page_ext
539[    0.036881] Node 0, zone      DMA: page owner found early allocated 3332 pages
540[    0.039450] kmemleak: Kernel memory leak detector disabled
541[    0.043101] Calibrating delay loop (skipped), value calculated using timer frequency.. 38.40 BogoMIPS (lpj=192000)
542[    0.056409] pid_max: default: 32768 minimum: 301
543[    0.059160] Security Framework initialized
544[    0.063598] SELinux:  Initializing.
545[    0.067652] Mount-cache hash table entries: 4096 (order: 3, 32768 bytes)
546[    0.070914] Mountpoint-cache hash table entries: 4096 (order: 3, 32768 bytes)
547[    0.079016] ftrace: allocating 43141 entries in 169 pages
548[    0.238766] /cpus/cpu@0: Missing clock-frequency property
549[    0.238850] /cpus/cpu@1: Missing clock-frequency property
550[    0.243254] /cpus/cpu@2: Missing clock-frequency property
551[    0.248592] /cpus/cpu@3: Missing clock-frequency property
552[    0.254028] /cpus/cpu@100: Missing clock-frequency property
553[    0.259375] /cpus/cpu@101: Missing clock-frequency property
554[    0.264791] /cpus/cpu@102: Missing clock-frequency property
555[    0.270332] /cpus/cpu@103: Missing clock-frequency property
556[    0.276673] sched-energy: Sched-energy-costs installed from DT
557[    0.281407] ASID allocator initialised with 32768 entries
558[    0.309599] cpu_clock_pwr_init: Power clocks configured
559[    0.312115] Core Debug Lock unlocked
560[    0.314950] MSM Memory Dump base table set up
561[    0.317523] MSM Memory Dump apps data table set up
562[    0.322386] EFI services will not be available.
563[    0.346124] CPU1: Booted secondary processor [410fd034]
564[    0.360475] CPU2: Booted secondary processor [410fd034]
565[    0.374798] CPU3: Booted secondary processor [410fd034]
566[    0.389196] CPU4: Booted secondary processor [410fd034]
567[    0.403700] CPU5: Booted secondary processor [410fd034]
568[    0.418109] CPU6: Booted secondary processor [410fd034]
569[    0.432547] CPU7: Booted secondary processor [410fd034]
570[    0.433211] Brought up 8 CPUs
571[    0.468508] SMP: Total of 8 processors activated.
572[    0.471677] CPU features: detected feature: 32-bit EL0 Support
573[    0.476328] CPU features: kernel page table isolation forced OFF by command line option
574[    0.482092] CPU: All CPU(s) started at EL1
575[    0.490070] alternatives: patching kernel code
576[    0.494647] CPU7: update max cpu_capacity 1024
577[    0.620803] CPU0: update max cpu_capacity 1024
578[    0.879585] DMI not present or invalid.
579[    0.881103] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
580[    0.882304] futex hash table entries: 2048 (order: 6, 262144 bytes)
581[    1.139859] pinctrl core: initialized pinctrl subsystem
582[    1.144814] NET: Registered protocol family 16
583[    1.150932] schedtune: init normalization constants...
584[    1.150985] schedtune: CLUSTER[0-3]      min_pwr:     1 max_pwr:   180
585[    1.154983] schedtune: CPU[0]            min_pwr:     1 max_pwr:    65
586[    1.161522] schedtune: CPU[1]            min_pwr:     1 max_pwr:    65
587[    1.168003] schedtune: CPU[2]            min_pwr:     1 max_pwr:    65
588[    1.174560] schedtune: CPU[3]            min_pwr:     1 max_pwr:    65
589[    1.181049] schedtune: CLUSTER[4-7]      min_pwr:     1 max_pwr:   175
590[    1.187534] schedtune: CPU[4]            min_pwr:     1 max_pwr:    65
591[    1.194088] schedtune: CPU[5]            min_pwr:     1 max_pwr:    65
592[    1.200554] schedtune: CPU[6]            min_pwr:     1 max_pwr:    65
593[    1.207090] schedtune: CPU[7]            min_pwr:     1 max_pwr:    65
594[    1.213619] schedtune: SYSTEM            min_pwr:    10 max_pwr:   875
595[    1.220087] schedtune: using normalization constants mul: 789479538 sh1: 1 sh2: 9
596[    1.226619] schedtune: verify normalization constants...
597[    1.234189] schedtune: max_pwr/2^0:  865 => norm_pwr:  1024
598[    1.239526] schedtune: max_pwr/2^1:  432 => norm_pwr:   511
599[    1.244847] schedtune: max_pwr/2^2:  216 => norm_pwr:   255
600[    1.250378] schedtune: max_pwr/2^3:  108 => norm_pwr:   127
601[    1.255976] schedtune: max_pwr/2^4:   54 => norm_pwr:    63
602[    1.261513] schedtune: max_pwr/2^5:   27 => norm_pwr:    31
603[    1.267046] schedtune: configured to support 5 boost groups
604[    1.277509] cpuidle: using governor menu
605[    1.279639] cpuidle: using governor qcom
606[    1.287620] vdso: 2 pages (1 code @ ffffff9081807000, 1 data @ ffffff9082564000)
607[    1.287712] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers.
608[    1.302404] DMA: preallocated 256 KiB pool for atomic allocations
609[    1.316269] smd_channel_probe_now: allocation table not initialized
610[    1.319902] smd_channel_probe_now: allocation table not initialized
611[    1.324278] smd_channel_probe_now: allocation table not initialized
612[    1.331842] msm_rpm_glink_dt_parse: qcom,rpm-glink compatible not matches
613[    1.335993] pm8953_s1: Bringing 1uV into 16-16uV
614[    1.344034] pm8953_s2_level: Bringing 1uV into 16-16uV
615[    1.347762] pm8953_s2_floor_level: Bringing 1uV into 16-16uV
616[    1.353471] pm8953_s2_level_ao: Bringing 1uV into 16-16uV
617[    1.368838] pm8953_s7_level_ao: Bringing 1uV into 16-16uV
618[    1.432797] qcom,gcc-8953 1800000.qcom,gcc: Venus speed bin: 6
619[    1.520239] branch_clk_handoff: gcc_usb_phy_cfg_ahb_clk clock is enabled in HW[    1.520291] branch_clk_handoff: even though ENABLE_BIT is not set
620[    1.535346] qcom,gcc-8953 1800000.qcom,gcc: Registered GCC clocks
621[    1.537725] msm8953-pinctrl 1000000.pinctrl: invalid resource
622[    1.607043] platform soc:qcom,kgsl-hyp: assigned reserved memory node gpu_region@0
623[    1.643699] unable to find DT imem DLOAD mode node
624[    1.645205] unable to find DT imem EDLOAD mode node
625[    1.654626] sps:sps is ready.
626[    1.669498] spmi spmi-0: PMIC arbiter version v2 (0x20010000)
627[    1.678407] cpu-clock-8953 b114000.qcom,cpu-clock-8953: Speed bin: 6 PVS Version: 0
628[    1.679026] cpu-clock-8953 b114000.qcom,cpu-clock-8953: Get vdd-pwrcl regulator!!!
629[    1.694793] pm8953_s5_avs_limit: Bringing 0uV into 400000-400000uV
630[    1.696260] spm_regulator_probe: name=pm8953_s5, range=LV, voltage=870000 uV, mode=AUTO, step rate=1200 uV/us
631[    1.696430] msm_watchdog b017000.qcom,wdt: wdog absent resource not present
632[    1.705189] msm_watchdog b017000.qcom,wdt: MSM Watchdog Initialized
633[    1.716894] platform soc:qcom,msm-adsprpc-mem: assigned reserved memory node adsp_region@0
634[    1.731972] platform 4080000.qcom,mss: assigned reserved memory node modem_region@0
635[    1.733215] platform c200000.qcom,lpass: assigned reserved memory node adsp_fw_region@0
636[    1.739956] platform a21b000.qcom,pronto: assigned reserved memory node wcnss_fw_region@0
637[    1.747595] platform 1de0000.qcom,venus: assigned reserved memory node venus_region@0
638[    1.760047] apc_mem_acc_corner: Bringing 0uV into 1-1uV
639[    1.767336] cpr4_apss_read_fuse_data: apc_corner: speed bin = 6, CPR fusing revision = 3, foundry id = 2
640[    1.767944] cpr4_msm8953_apss_read_fuse_data: apc_corner: CPR misc fuse value = 0
641[    1.777751] cpr4_msm8953_apss_read_fuse_data: apc_corner: Voltage boost fuse config = 0 boost = disable
642[    1.785356] cpr4_apss_calculate_open_loop_voltages: apc_corner: fused   LowSVS: open-loop= 625000 uV
643[    1.794294] cpr4_apss_calculate_open_loop_voltages: apc_corner: fused      SVS: open-loop= 680000 uV
644[    1.803644] cpr4_apss_calculate_open_loop_voltages: apc_corner: fused      NOM: open-loop= 775000 uV
645[    1.812779] cpr4_apss_calculate_open_loop_voltages: apc_corner: fused TURBO_L1: open-loop= 915000 uV
646[    1.822026] cpr4_apss_calculate_target_quotients: apc_corner: fused   LowSVS: quot[ 7]= 474
647[    1.831009] cpr4_apss_calculate_target_quotients: apc_corner: fused      SVS: quot[ 7]= 560, quot_offset[ 7]=  85
648[    1.839039] cpr4_apss_calculate_target_quotients: apc_corner: fused      NOM: quot[ 7]= 752, quot_offset[ 7]= 190
649[    1.849481] cpr4_apss_calculate_target_quotients: apc_corner: fused TURBO_L1: quot[ 7]=1026, quot_offset[ 7]= 270
650[    1.860198] cpr4_apss_init_aging: apc: sensor 6 aging init quotient diff = -6, aging RO scale = 2800 QUOT/V
651[    1.870176] cpr3_regulator_init_ctrl: apc: Default CPR mode = HW closed-loop[    1.884671] gfx_mem_acc_corner: Bringing 0uV into 1-1uV
652[    1.890359] GFX_LDO: msm_gfx_ldo_voltage_init: LDO corner 1: target-volt = 580000 uV
653[    1.891635] GFX_LDO: msm_gfx_ldo_voltage_init: LDO corner 2: target-volt = 650000 uV
654[    1.899543] GFX_LDO: msm_gfx_ldo_voltage_init: LDO corner 3: target-volt = 720000 uV
655[    1.907312] GFX_LDO: msm_gfx_ldo_adjust_init_voltage: adjusted the open-loop voltage[1] 580000 -> 615000
656[    1.915043] GFX_LDO: msm_gfx_ldo_adjust_init_voltage: adjusted the open-loop voltage[2] 650000 -> 675000
657[    1.924484] GFX_LDO: msm_gfx_ldo_voltage_init: LDO-mode fuse disabled by default
658[    2.122424] mdss_pll_probe: MDSS pll label = MDSS DSI 0 PLL
659[    2.122487] mdss_pll_probe: mdss_pll_probe: label=MDSS DSI 0 PLL PLL SSC enabled
660[    2.126896] mdss_pll_util_parse_dt_supply: : error reading ulp load. rc=-22
661[    2.138799] dsi_pll_clock_register_8996: Registered DSI PLL ndx=0 clocks successfully
662[    2.141339] mdss_pll_probe: MDSS pll label = MDSS DSI 1 PLL
663[    2.149139] mdss_pll_probe: mdss_pll_probe: label=MDSS DSI 1 PLL PLL SSC enabled
664[    2.154637] mdss_pll_util_parse_dt_supply: : error reading ulp load. rc=-22
665[    2.163691] pll_is_pll_locked_8996: DSI PLL ndx=1 status=0 failed to Lock
666[    2.172652] dsi_pll_clock_register_8996: Registered DSI PLL ndx=1 clocks successfully
667[    2.178845] msm_cpuss_dump soc:cpuss_dump: Couldn't get memory for dumping
668[    2.183647] msm_cpuss_dump soc:cpuss_dump: Couldn't get memory for dumping
669[    2.203599] KPI: Bootloader start count = 26694
670[    2.203647] KPI: Bootloader end count = 203339
671[    2.206948] KPI: Bootloader display count = 88813
672[    2.211565] KPI: Bootloader load kernel count = 7057
673[    2.216239] KPI: Kernel MPM timestamp = 314766
674[    2.221299] KPI: Kernel MPM Clock frequency = 32768
675[    2.225574] socinfo_print: v0.10, id=338, ver=1.1, raw_id=154, raw_ver=0, hw_plat=8, hw_plat_ver=65536
676[    2.225574]  accessory_chip=0, hw_plat_subtype=0, pmic_model=65558, pmic_die_revision=65536 foundry_id=3 serial_number=1410127470
677[    2.241735] arm-smmu 1c40000.arm,smmu-kgsl: Couldn't get clock: gpu_ahb_clk
678[    2.254318] arm-smmu 1e00000.qcom,iommu:     (IDR0.CTTW overridden by dma-coherent property)
679[    2.258184] arm-smmu 1e00000.qcom,iommu:     stream matching with 123 register groups, mask 0x7fff
680[    2.266675] arm-smmu 1e00000.qcom,iommu: found 32 context interrupt(s) but have 30 context banks. assuming 30 context interrupts.
681[    2.278526] iommu: Adding device soc:qcom,msm-audio-ion to group 0
682[    2.294116] SCSI subsystem initialized
683[    2.295184] usbcore: registered new interface driver usbfs
684[    2.297017] usbcore: registered new interface driver hub
685[    2.302887] usbcore: registered new device driver usb
686[    2.312028] qcom,qpnp-power-on 200f000.qcom,spmi:qcom,pm8953@0:qcom,power-on@800: PMIC@SID0 Power-on reason: Triggered from KPD (power key press) and 'cold' boot
687[    2.312697] qcom,qpnp-power-on 200f000.qcom,spmi:qcom,pm8953@0:qcom,power-on@800: PMIC@SID0: Power-off reason: Triggered from PS_HOLD (PS_HOLD/MSM controlled shutdown)
688[    2.328196] input: qpnp_pon as /devices/virtual/input/input0
689[    2.346354] i2c-msm-v2 78b6000.i2c: probing driver i2c-msm-v2
690[    2.347936] AXI: msm_bus_scale_register_client(): msm_bus_scale_register_client: Bus driver not ready.[    2.353448] i2c-msm-v2 78b6000.i2c: msm_bus_scale_register_client(mstr-id:86):0 (not a problem)
691[    2.364919] AXI: msm_bus_scale_register_client(): msm_bus_scale_register_client: Bus driver not ready.[    2.373743] media: Linux media interface: v0.10
692[    2.381549] Linux video capture interface: v2.00
693[    2.444020] EDAC MC: Ver: 3.0.0
694[    2.450460] dmi: Firmware registration failed.
695[    2.453450] platform soc:qcom,ion:qcom,ion-heap@8: assigned reserved memory node secure_region@0
696[    2.454739] platform soc:qcom,ion:qcom,ion-heap@27: assigned reserved memory node qseecom_region@0
697[    2.463677] platform soc:qcom,ion:qcom,ion-heap@19: assigned reserved memory node qseecom_ta_region
698[    2.473085] ION heap system created
699[    2.481043] ION heap mm created at 0x00000000f4800000 with size b400000
700[    2.483986] ION heap qsecom created at 0x00000000f3800000 with size 1000000
701[    2.490580] ION heap qsecom_ta created at 0x00000000f3400000 with size 400000
702[    2.502364] AXI: msm_bus_scale_register_client(): msm_bus_scale_register_client: Bus driver not ready.[    2.504772] ipa ipa_init:4016 fail to register with bus mgr!
703[    2.515719] ipa ipa_plat_drv_probe:5046 ipa_init failed
704[    2.522173] type = 22
705[    2.524557] PMIC@SID0: PM8953 v1.0 options: 2, 2, 0, 0
706[    2.535450] Advanced Linux Sound Architecture Driver Initialized.
707[    2.538077] Bluetooth: Core ver 2.22
708[    2.540648] NET: Registered protocol family 31
709[    2.544229] Bluetooth: HCI device and connection manager initialized
710[    2.548470] Bluetooth: HCI socket layer initialized
711[    2.555022] Bluetooth: L2CAP socket layer initialized
712[    2.561413] NetLabel: Initializing
713[    2.564752] NetLabel:  domain hash size = 128
714[    2.568051] NetLabel:  protocols = UNLABELED CIPSOv4
715[    2.572758] NetLabel:  unlabeled traffic allowed by default
716[    2.580262] gcc_oxili_gfx3d_clk: set OPP pair(19200000 Hz: 615000 uV) on 1c00000.qcom,kgsl-3d0
717[    2.585856] gcc_oxili_gfx3d_clk: set OPP pair(200000000 Hz: 675000 uV) on 1c00000.qcom,kgsl-3d0
718[    2.595511] gcc_oxili_gfx3d_clk: set OPP pair(600000000 Hz: 0 uV) on 1c00000.qcom,kgsl-3d0
719[    2.602728] gcc-gfx-8953 1800000.qcom,gcc-gfx: Registered GCC GFX clocks.
720[    2.608785] cpu-clock-8953 b114000.qcom,cpu-clock-8953: Speed bin: 6 PVS Version: 0
721[    2.620577] cpr3_regulator_measure_aging: apc: average quotient delta=-16 (count=10)
722[    2.622825] cpr3_regulator_aging_adjust: apc: aging measurement successful; aging reference adjustment voltage=0 uV
723[    2.635787] cpu-clock-8953 b114000.qcom,cpu-clock-8953: missing qcom,dfs-sid-c0
724[    2.640931] cpu-clock-8953 b114000.qcom,cpu-clock-8953: No DFS SID tables found for Cluster-0
725[    2.648189] cpu-clock-8953 b114000.qcom,cpu-clock-8953: missing qcom,link-sid-c0
726[    2.656913] cpu-clock-8953 b114000.qcom,cpu-clock-8953: No Link SID tables found for Cluster-0
727[    2.664361] cpu-clock-8953 b114000.qcom,cpu-clock-8953: missing qcom,lmh-sid-c0
728[    2.672793] cpu-clock-8953 b114000.qcom,cpu-clock-8953: No LMH SID tables found for Cluster-0
729[    2.679953] ramp_lmh_sid: Use Default LMH SID
730[    2.688650] ramp_dfs_sid: Use Default DFS SID
731[    2.693009] ramp_link_sid: Use Default Link SID
732[    2.697394] cpu-clock-8953 b114000.qcom,cpu-clock-8953: missing qcom,dfs-sid-c1
733[    2.701680] cpu-clock-8953 b114000.qcom,cpu-clock-8953: No DFS SID tables found for Cluster-1
734[    2.708952] cpu-clock-8953 b114000.qcom,cpu-clock-8953: missing qcom,link-sid-c1
735[    2.717672] cpu-clock-8953 b114000.qcom,cpu-clock-8953: No Link SID tables found for Cluster-1
736[    2.725123] cpu-clock-8953 b114000.qcom,cpu-clock-8953: missing qcom,lmh-sid-c1
737[    2.733556] cpu-clock-8953 b114000.qcom,cpu-clock-8953: No LMH SID tables found for Cluster-1
738[    2.740716] ramp_lmh_sid: Use Default LMH SID
739[    2.749412] ramp_dfs_sid: Use Default DFS SID
740[    2.753772] ramp_link_sid: Use Default Link SID
741[    2.758236] clock_rcgwr_init: RCGwR  Init Completed
742[    2.782149] populate_opp_table: clock-cpu-8953: OPP tables populated (cpu 3 and 7)
743[    2.782200] print_opp_table: clock_cpu: a53 C0: OPP voltage for 652800000: 1
744[    2.788624] print_opp_table: clock_cpu: a53 C0: OPP voltage for 1804800000: 5
745[    2.795881] print_opp_table: clock_cpu: a53 C1: OPP voltage for 652800000: 1
746[    2.802885] print_opp_table: clock_cpu: a53 C2: OPP voltage for 1804800000: 5
747[    2.811194] sched-energy energy-costs: cpu=0 eff=1024 [freq=652800 cap=371 power_d0=5] -> [freq=2400000 cap=1024 power_d0=65]
748[    2.817020] CPU0: update cpu_capacity 1024
749[    2.828322] sched-energy energy-costs: cpu=1 eff=1024 [freq=652800 cap=371 power_d0=5] -> [freq=2400000 cap=1024 power_d0=65]
750[    2.832353] CPU1: update cpu_capacity 1024
751[    2.843684] sched-energy energy-costs: cpu=2 eff=1024 [freq=652800 cap=371 power_d0=5] -> [freq=2400000 cap=1024 power_d0=65]
752[    2.847661] CPU2: update cpu_capacity 1024
753[    2.859066] sched-energy energy-costs: cpu=3 eff=1024 [freq=652800 cap=371 power_d0=5] -> [freq=2400000 cap=1024 power_d0=65]
754[    2.863049] CPU3: update cpu_capacity 1024
755[    2.874430] sched-energy energy-costs: cpu=4 eff=1024 [freq=652800 cap=371 power_d0=5] -> [freq=2400000 cap=1024 power_d0=65]
756[    2.878390] CPU4: update cpu_capacity 1024
757[    2.889776] sched-energy energy-costs: cpu=5 eff=1024 [freq=652800 cap=371 power_d0=5] -> [freq=2400000 cap=1024 power_d0=65]
758[    2.893795] CPU5: update cpu_capacity 1024
759[    2.905142] sched-energy energy-costs: cpu=6 eff=1024 [freq=652800 cap=371 power_d0=5] -> [freq=2400000 cap=1024 power_d0=65]
760[    2.909118] CPU6: update cpu_capacity 1024
761[    2.920524] sched-energy energy-costs: cpu=7 eff=1024 [freq=652800 cap=371 power_d0=5] -> [freq=2400000 cap=1024 power_d0=65]
762[    2.924506] CPU7: update cpu_capacity 1024
763[    2.940806] CPU2: update max cpu_capacity 1024
764[    2.942329] sched-energy energy-costs: Sched-energy-costs capacity updated
765[    2.945073] gdsc_oxili_gx: supplied by msm_gfx_ldo
766[    2.956976] arm-smmu 1c40000.arm,smmu-kgsl:  (IDR0.CTTW overridden by dma-coherent property)
767[    2.957037] arm-smmu 1c40000.arm,smmu-kgsl:  stream matching with 4 register groups, mask 0x7fff
768[    2.975607] cpufreq: driver msm up and running
769[    2.976386] AXI: msm_bus_scale_register_client(): msm_bus_scale_register_client: Bus driver not ready.[    2.978943] ipa ipa_init:4016 fail to register with bus mgr!
770[    2.989523] ipa ipa_plat_drv_probe:5046 ipa_init failed
771[    2.994997] clocksource: Switched to clocksource arch_sys_counter
772[    3.154874] VFS: Disk quotas dquot_6.6.0
773[    3.155021] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
774[    3.158108] msm_bus_fabric_init_driver
775[    3.191352] msm_bus_device 580000.ad-hoc-bus: Bus scaling driver probe successful
776[    3.195019] NET: Registered protocol family 2
777[    3.198795] TCP established hash table entries: 16384 (order: 5, 131072 bytes)
778[    3.202292] TCP bind hash table entries: 16384 (order: 7, 524288 bytes)
779[    3.209577] TCP: Hash tables configured (established 16384 bind 16384)
780[    3.215953] UDP hash table entries: 1024 (order: 4, 98304 bytes)
781[    3.222489] UDP-Lite hash table entries: 1024 (order: 4, 98304 bytes)
782[    3.229034] NET: Registered protocol family 1
783[    3.238086] gcc-mdss-8953 1800000.qcom,gcc-mdss: Registered GCC MDSS clocks.
784[    3.241279] ipa ipa2_uc_state_check:297 uC interface not initialized
785[    3.246345] ipa ipa_sps_irq_control_all:963 EP (2) not allocated.
786[    3.252703] ipa ipa_sps_irq_control_all:963 EP (5) not allocated.
787[    3.261004] sps:BAM 0x0000000007904000 is registered.[    3.265739] sps:BAM 0x0000000007904000 (va:0xffffff8009640000) enabled: ver:0x27, number of pipes:20
788[    3.281716] IPA driver initialization was successful.
789[    3.284241] hw perfevents: enabled with armv8_pmuv3 PMU driver, 7 counters available
790[    3.286942] cryptomgr_test (119) used greatest stack depth: 14464 bytes left
791[    3.293745] cryptomgr_test (120) used greatest stack depth: 14432 bytes left
792[    3.303811] cryptomgr_test (140) used greatest stack depth: 14400 bytes left
793[    3.311128] audit: initializing netlink subsys (disabled)
794[    3.314767] audit: type=2000 audit(3.299:1): initialized
795[    3.322832] Initialise system trusted keyrings
796[    3.326156] workingset: timestamp_bits=62 max_order=19 bucket_order=0
797[    3.355686] Registering sdcardfs 0.1
798[    3.356515] fuse init (API version 7.26)
799[    3.361347] pfk_ext4 [pfk_ext4_init]: PFK EXT4 inited successfully
800[    3.362230] pfk_f2fs [pfk_f2fs_init]: PFK F2FS inited successfully
801[    3.368221] pfk [pfk_init]: Driver initialized successfully
802[    3.379488] cryptomgr_test (177) used greatest stack depth: 13296 bytes left
803[    3.380231] Key type asymmetric registered
804[    3.387165] Asymmetric key parser 'x509' registered
805[    3.391102] io scheduler noop registered
806[    3.396206] io scheduler cfq registered (default)
807[    3.431742] msm_mdss_get_res_byname: 'vbif_nrt_phys' resource not found
808[    3.431782] mdss_mdp_probe+0x1d8/0x169c->msm_mdss_ioremap_byname: 'vbif_nrt_phys' msm_mdss_get_res_byname failed
809[    3.437724] mdss_mdp_irq_clk_register: unable to get clk: lut_clk
810[    3.447634] mdss_mdp_irq_clk_register: unable to get clk: mnoc_clk
811[    3.455627] No change in context(0==0), skip
812[    3.460523] mdss_mdp_pipe_addr_setup: type:0 ftchid:-1 xinid:0 num:0 rect:0 ndx:0x1 prio:0
813[    3.464133] mdss_mdp_pipe_addr_setup: type:1 ftchid:-1 xinid:1 num:3 rect:0 ndx:0x8 prio:1
814[    3.472283] mdss_mdp_pipe_addr_setup: type:1 ftchid:-1 xinid:5 num:4 rect:0 ndx:0x10 prio:2
815[    3.480406] mdss_mdp_pipe_addr_setup: type:2 ftchid:-1 xinid:2 num:6 rect:0 ndx:0x40 prio:3
816[    3.488666] mdss_mdp_pipe_addr_setup: type:3 ftchid:-1 xinid:7 num:10 rect:0 ndx:0x400 prio:0
817[    3.496994] mdss_mdp_parse_dt_handler: Error from prop qcom,mdss-pipe-sw-reset-off : u32 array read
818[    3.505809] mdss_mdp_parse_dt_handler: Error from prop qcom,mdss-ib-factor-overlap : u32 array read
819[    3.514537] mdss_mdp_parse_dt_handler: Error from prop qcom,mdss-bus-througput-factor : u32 array read
820[    3.524298] xlog_status: enable:1, panic:1, dump:2
821[    3.533800] iommu: Adding device 1a00000.qcom,mdss_mdp:qcom,smmu_mdp_unsec_cb to group 1
822[    3.538311] iommu: Adding device 1a00000.qcom,mdss_mdp:qcom,smmu_mdp_sec_cb to group 2
823[    3.546432] mdss_mdp_probe: mdss version = 0x10100000, bootloader display is on, num 1, intf_sel=0x00000100
824[    3.559057] mdss_smmu_util_parse_dt_clock: clocks are not defined
825[    3.563341] mdss_smmu_probe: iommu v2 domain[0] mapping and clk register successful!
826[    3.569611] mdss_smmu_util_parse_dt_clock: clocks are not defined
827[    3.577525] mdss_smmu_probe: iommu v2 domain[2] mapping and clk register successful!
828[    3.585006] mdss_dsi_get_dt_vreg_data: error reading ulp load. rc=-22
829[    3.591215] mdss_dsi_get_dt_vreg_data: error reading ulp load. rc=-22
830[    3.597517] mdss_dsi_get_dt_vreg_data: error reading ulp load. rc=-22
831[    3.606269] mdss_dsi_ctrl_probe: DSI Ctrl name = MDSS DSI CTRL->0
832[    3.610965] mdss_dsi_find_panel_of_node: cmdline:0:qcom,mdss_dsi_hx8394f_720p_video:1:none:cfg:single_dsi panel_name:qcom,mdss_dsi_hx8394f_720p_video
833[    3.616452] mdss_dsi_panel_init: Panel Name = hx8394f 720p video mode dsi panel
834[    3.629956] mdss_dsi_panel_timing_from_dt: found new timing "qcom,mdss_dsi_hx8394f_720p_video" (ffffffdd6e46f1e8)
835[    3.636947] mdss_dsi_parse_dcs_cmds: failed, key=qcom,mdss-dsi-post-panel-on-command
836[    3.647335] mdss_dsi_parse_dcs_cmds: failed, key=qcom,mdss-dsi-timing-switch-command
837[    3.655155] mdss_dsi_panel_get_dsc_cfg_np: cannot find dsc config node:
838[    3.662968] mdss_dsi_parse_dcs_cmds: failed, key=qcom,mdss-dsi-idle-on-command
839[    3.669193] mdss_dsi_parse_dcs_cmds: failed, key=qcom,mdss-dsi-idle-off-command
840[    3.676654] mdss_dsi_parse_panel_features: ulps feature disabled
841[    3.683702] mdss_dsi_parse_panel_features: ulps during suspend feature disabled[    3.689939] mdss_dsi_parse_dms_config: dynamic switch feature enabled: 0
842[    3.698025] mdss_dsi_parse_dcs_cmds: failed, key=qcom,mdss-dsi-lp-mode-on
843[    3.703758] mdss_dsi_parse_dcs_cmds: failed, key=qcom,mdss-dsi-lp-mode-off
844[    3.710496] mdss_dsi_get_dt_vreg_data: error reading ulp load. rc=-22
845[    3.717240] mdss_dsi_get_dt_vreg_data: error reading ulp load. rc=-22
846[    3.724096] mdss_dsi_parse_ctrl_params:4166 Unable to read qcom,display-id, data=0000000000000000,len=20
847[    3.730150] mdss_dsi_parse_gpio_params: bklt_en gpio not specified
848[    3.739709] mdss_dsi_parse_gpio_params: ext vdd gpio not specified
849[    3.745732] msm_mdss_get_res_byname: 'dsi_phy_regulator' resource not found
850[    3.751867] mdss_dsi_retrieve_ctrl_resources+0xd0/0x294->msm_mdss_ioremap_byname: 'dsi_phy_regulator' msm_mdss_get_res_byname failed
851[    3.758700] mdss_dsi_retrieve_ctrl_resources: ctrl_base=ffffff80093f8000 ctrl_size=400 phy_base=ffffff80093fa400 phy_size=580
852[    3.771189] dsi_panel_device_register: Continuous splash enabled
853[    3.782767] mdss_register_panel: adding framebuffer device 1a94000.qcom,mdss_dsi_ctrl0
854[    3.790671] mdss_dsi_ctrl_probe: Dsi Ctrl->0 initialized, DSI rev:0x10040002, PHY rev:0x2
855[    3.796696] mdss_dsi_ctrl_probe: DSI Ctrl name = MDSS DSI CTRL->1
856[    3.804121] mdss_dsi_pinctrl_init: failed to get pinctrl
857[    3.810164] mdss_dsi_ctrl_probe: failed to get pin resources
858[    3.815694] mdss_dsi_find_panel_of_node: cmdline:0:qcom,mdss_dsi_hx8394f_720p_video:1:none:cfg:single_dsi panel_name:none
859[    3.821213] mdss_dsi_config_panel: can't find panel node 0:qcom,mdss_dsi_hx8394f_720p_video:1:none:cfg:single_dsi
860[    3.832071] mdss_dsi_ctrl_probe: panel configuration failed
861[    3.842328] mdss_dsi_ctrl: probe of 1a96000.qcom,mdss_dsi_ctrl1 failed with error -22
862[    3.848581] mdss_dsi_status_init: DSI status check interval:5000
863[    3.856970] mdss_register_panel: adding framebuffer device soc:qcom,mdss_wb_panel
864[    3.864139] mdss_fb_probe: fb0: split_mode:0 left:0 right:0
865[    3.871517] mdss_fb_register: FrameBuffer[0] 720x1280 registered successfully!
866[    3.875404] mdss_fb_probe: fb1: split_mode:0 left:0 right:0
867[    3.882103] mdss_fb_register: FrameBuffer[1] 640x640 registered successfully!
868[    3.887527] mdss_mdp_splash_parse_dt: splash mem child node is not present
869[    3.895354] qcom-sps-dma 7884000.qcom,sps-dma: dma_async_device_register: device has no channels!
870[    3.901486] qcom-sps-dma 7ac4000.qcom,sps-dma: dma_async_device_register: device has no channels!
871[    3.923673] scm_call failed: func id 0x42000c16, ret: -1, syscall returns: 0x0, 0x0, 0x0
872[    3.923712] hyp_assign_table: Failed to assign memory protection, ret = -5
873[    3.930860] memshare: hyp_assign_phys failed size=2097152 err=-5
874[    3.937586] memshare_child soc:qcom,memshare:qcom,client_1: for memshare_GPS segments only will be dumped.
875[    3.944556] memshare_child soc:qcom,memshare:qcom,client_2: for memshare_FTM segments only will be dumped.
876[    3.956364] scm_call failed: func id 0x42000c16, ret: -1, syscall returns: 0x0, 0x0, 0x0
877[    3.962797] hyp_assign_table: Failed to assign memory protection, ret = -5
878[    3.971178] memshare: hyp_assign_phys failed size=5242880 err=-5
879[    3.977718] memshare_child soc:qcom,memshare:qcom,client_3: for memshare_DIAG segments only will be dumped.
880[    3.987060] minidump-id not found for a506_zap
881[    3.993412] subsys-pil-tz soc:qcom,kgsl-hyp: for a506_zap segments only will be dumped.
882[    3.999351] minidump-id not found for adsp
883[    4.006316] minidump-id not found for wcnss
884[    4.010960] minidump-id not found for venus
885[    4.014016] subsys-pil-tz 1de0000.qcom,venus: for venus segments only will be dumped.
886[    4.022173] minidump-id not found for modem
887[    4.031267] msm-dcc b3000.dcc: DCC XPU is not specified
888[    4.036629] wcnss: wcnss_wlan probed in built-in mode
889[    4.039344] msm_serial 78af000.serial: msm_serial: detected port #0
890[    4.040692] msm_serial 78af000.serial: uartclk = 7372800
891[    4.046858] 78af000.serial: ttyHSL0 at MMIO 0x78af000 (irq = 64, base_baud = 460800ù[    4.060814] console [ttyHSL0] enabled
892[    4.060814] console [ttyHSL0] enabled
893[    4.063446] bootconsole [msm_serial_dm0] disabled
894[    4.063446] bootconsole [msm_serial_dm0] disabled
895[    4.072594] msm_serial 7aef000.serial: msm_serial: detected port #1
896[    4.076504] msm_serial 7aef000.serial: uartclk = 19200000
897[    4.082630] 7aef000.serial: ttyHSL1 at MMIO 0x7aef000 (irq = 65, base_baud = 1200000) is a MSM
898[    4.088905] msm_serial 78b0000.serial: msm_serial: detected port #2
899[    4.096673] msm_serial 78b0000.serial: uartclk = 19200000
900[    4.102837] 78b0000.serial: ttyHSL2 at MMIO 0x78b0000 (irq = 66, base_baud = 1200000) is a MSM
901[    4.109444] msm_serial: driver initialized
902[    4.119284] msm_serial_hs module loaded
903[    4.128840] random: fast init done
904[    4.128975] random: crng init done
905[    4.146415] diag: In __diag_glink_init, unable to register for glink channel DIAG_CTRL
906[    4.146787] diag: In __diag_glink_init, unable to register for glink channel DIAG_DATA
907[    4.153606] diag: In __diag_glink_init, unable to register for glink channel DIAG_CMD
908[    4.161489] diag: In __diag_glink_init, unable to register for glink channel DIAG_DCI_DATA
909[    4.169327] diag: In __diag_glink_init, unable to register for glink channel DIAG_DCI_CMD
910[    4.186894] iommu: Adding device 1c40000.qcom,kgsl-iommu:gfx3d_user to group 3
911[    4.187547] platform 1c40000.qcom,kgsl-iommu:gfx3d_secure: assigned reserved memory node secure_region@0
912[    4.193496] iommu: Adding device 1c40000.qcom,kgsl-iommu:gfx3d_secure to group 4
913[    4.241303] brd: module loaded
914[    4.256355] loop: module loaded
915[    4.257869] zram: Added device: zram0
916[    4.258364] lkdtm: No crash points registered, enable through debugfs
917[    4.264111] QSEECOM: qseecom_probe: qseecom.qsee_version = 0x1001000
918[    4.268602] QSEECOM: qseecom_retrieve_ce_data: Device does not support PFE[    4.275021] QSEECOM: qseecom_probe: qseecom clocks handled by other subsystem
919[    4.282611] QSEECOM: qseecom_probe: qsee reentrancy support phase is not defined, setting to default 0
920[    4.289572] QSEECOM: qseecom_probe: qseecom.whitelist_support = 1
921[    4.302730] QCE50: __qce_get_device_tree_data: BAM Apps EE is not defined, setting to default 1
922[    4.304643] qce 720000.qcedev: QTI Crypto 5.3.3 device found @0x720000
923[    4.312616] qce 720000.qcedev: CE device = 0x0 IO base, CE = ffffff800a120000 Consumer (IN) PIPE 2,
924[    4.312616] Producer (OUT) PIPE 3 IO base BAM = 0000000000000000
925[    4.312616] BAM IRQ 63 Engines Availability = 0x2010853
926[    4.319872] sps:BAM 0x0000000000704000 is registered.[    4.339970] sps:BAM 0x0000000000704000 (va:0xffffff800a520000) enabled: ver:0x27, number of pipes:8
927[    4.345752] QCE50: qce_sps_init:  QTI MSM CE-BAM at 0x0000000000704000 irq 63
928[    4.362493] QCE50: __qce_get_device_tree_data: BAM Apps EE is not defined, setting to default 1
929[    4.366138] qcrypto 720000.qcrypto: QTI Crypto 5.3.3 device found @0x720000
930[    4.369999] qcrypto 720000.qcrypto: CE device = 0x0 IO base, CE = ffffff800a560000 Consumer (IN) PIPE 4,
931[    4.369999] Producer (OUT) PIPE 5 IO base BAM = 0000000000000000
932[    4.369999] BAM IRQ 63 Engines Availability = 0x2010853
933[    4.377599] QCE50: qce_sps_init:  QTI MSM CE-BAM at 0x0000000000704000 irq 63
934[    4.402023] qcrypto 720000.qcrypto: qcrypto-ecb-aes
935[    4.405088] qcrypto 720000.qcrypto: qcrypto-cbc-aes
936[    4.409742] qcrypto 720000.qcrypto: qcrypto-ctr-aes
937[    4.414619] qcrypto 720000.qcrypto: qcrypto-ecb-des
938[    4.419471] qcrypto 720000.qcrypto: qcrypto-cbc-des
939[    4.424341] qcrypto 720000.qcrypto: qcrypto-ecb-3des
940[    4.429191] qcrypto 720000.qcrypto: qcrypto-cbc-3des
941[    4.434473] qcrypto 720000.qcrypto: qcrypto-xts-aes
942[    4.439335] qcrypto 720000.qcrypto: qcrypto-sha1
943[    4.443964] qcrypto 720000.qcrypto: qcrypto-sha256
944[    4.448806] qcrypto 720000.qcrypto: qcrypto-aead-hmac-sha1-cbc-aes
945[    4.453416] qcrypto 720000.qcrypto: qcrypto-aead-hmac-sha1-cbc-des
946[    4.459564] qcrypto 720000.qcrypto: qcrypto-aead-hmac-sha1-cbc-3des
947[    4.465773] qcrypto 720000.qcrypto: qcrypto-aead-hmac-sha256-cbc-aes
948[    4.471908] qcrypto 720000.qcrypto: qcrypto-aead-hmac-sha256-cbc-des
949[    4.478501] qcrypto 720000.qcrypto: qcrypto-aead-hmac-sha256-cbc-3des
950[    4.484895] qcrypto 720000.qcrypto: qcrypto-hmac-sha1
951[    4.491183] qcrypto 720000.qcrypto: qcrypto-hmac-sha256
952[    4.496205] qcrypto 720000.qcrypto: qcrypto-aes-ccm
953[    4.501286] qcrypto 720000.qcrypto: qcrypto-rfc4309-aes-ccm
954[    4.507537] qcom_ice_get_device_tree_data: No vdd-hba-supply regulator, assuming not needed
955[    4.511691] ICE IRQ = 100
956[    4.519821] CHRDEV "icesdcc" major number 233 goes below the dynamic allocation range
957[    4.524822] SCSI Media Changer driver v0.25
958[    4.534484] libphy: Fixed MDIO Bus: probed
959[    4.534748] tun: Universal TUN/TAP device driver, 1.6
960[    4.538654] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
961[    4.543991] PPP generic driver version 2.4.2
962[    4.550073] PPP BSD Compression module registered
963[    4.554298] PPP Deflate Compression module registered
964[    4.558904] PPP MPPE Compression module registered
965[    4.563948] NET: Registered protocol family 24
966[    4.569157] usbcore: registered new interface driver asix
967[    4.573153] usbcore: registered new interface driver ax88179_178a
968[    4.578584] usbcore: registered new interface driver cdc_ether
969[    4.584687] usbcore: registered new interface driver net1080
970[    4.590390] usbcore: registered new interface driver cdc_subset
971[    4.596230] usbcore: registered new interface driver zaurus
972[    4.601900] usbcore: registered new interface driver cdc_ncm
973[    4.607324] CHRDEV "uio" major number 232 goes below the dynamic allocation range
974[    4.615374] msm_sharedmem: sharedmem_register_qmi: qmi init successful
975[    4.615954] scm_call failed: func id 0x42000c16, ret: -1, syscall returns: 0x0, 0x0, 0x0
976[    4.615961] hyp_assign_table: Failed to assign memory protection, ret = -5
977[    4.615975] msm_sharedmem: setup_shared_ram_perms: hyp_assign_phys failed IPA=0x0160x00000000f3100000 size=1572864 err=-5
978[    4.616265] msm_sharedmem: msm_sharedmem_probe: Device created for client 'rmtfs'
979[    4.627144] msm-dwc3 7000000.ssusb: unable to get dbm device
980[    4.630232] CHRDEV "usbmon" major number 231 goes below the dynamic allocation range
981[    4.630468] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
982[    4.630492] ehci-platform: EHCI generic platform driver
983[    4.631752] ehci-msm: Qualcomm On-Chip EHCI Host Controller
984[    4.634238] usbcore: registered new interface driver cdc_acm
985[    4.634242] cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters
986[    4.634368] usbcore: registered new interface driver usb-storage
987[    4.634435] usbcore: registered new interface driver ums-alauda
988[    4.634499] usbcore: registered new interface driver ums-cypress
989[    4.634563] usbcore: registered new interface driver ums-datafab
990[    4.634627] usbcore: registered new interface driver ums-freecom
991[    4.634698] usbcore: registered new interface driver ums-isd200
992[    4.634761] usbcore: registered new interface driver ums-jumpshot
993[    4.634824] usbcore: registered new interface driver ums-karma
994[    4.634888] usbcore: registered new interface driver ums-onetouch
995[    4.634952] usbcore: registered new interface driver ums-sddr09
996[    4.635016] usbcore: registered new interface driver ums-sddr55
997[    4.635080] usbcore: registered new interface driver ums-usbat
998[    4.635253] usbcore: registered new interface driver usbserial
999[    4.635338] usbcore: registered new interface driver usb_ehset_test
1000[    4.635419] usbcore: registered new interface driver lvs
1001[    4.635503] CHRDEV "ttyGS" major number 230 goes below the dynamic allocation range
1002[    4.636700] CHRDEV "rmnet_ctrl" major number 229 goes below the dynamic allocation range
1003[    4.638141] mousedev: PS/2 mouse device common for all mice
1004[    4.640444] qcom,qpnp-rtc 200f000.qcom,spmi:qcom,pm8953@0:qcom,pm8953_rtc: rtc core: registered qpnp_rtc as rtc0
1005[    4.641359] i2c /dev entries driver
1006[    4.646969] iommu: Adding device 1d00000.qcom,vidc:non_secure_cb to group 5
1007[    4.648441] iommu: Adding device 1d00000.qcom,vidc:secure_bitstream_cb to group 6
1008[    4.649426] scm_call failed: func id 0x42000c16, ret: -1, syscall returns: 0x0, 0x0, 0x0
1009[    4.649433] hyp_assign_table: Failed to assign memory protection, ret = -5
1010[    4.649837] iommu: Adding device 1d00000.qcom,vidc:secure_pixel_cb to group 7
1011[    4.650846] scm_call failed: func id 0x42000c16, ret: -1, syscall returns: 0x0, 0x0, 0x0
1012[    4.650853] hyp_assign_table: Failed to assign memory protection, ret = -5
1013[    4.651269] iommu: Adding device 1d00000.qcom,vidc:secure_non_pixel_cb to group 8
1014[    4.652244] scm_call failed: func id 0x42000c16, ret: -1, syscall returns: 0x0, 0x0, 0x0
1015[    4.652252] hyp_assign_table: Failed to assign memory protection, ret = -5
1016[    4.662173] iommu: Adding device soc:qcom,cam_smmu:msm_cam_smmu_cb1 to group 9
1017[    4.662767] CAM-SMMU cam_smmu_populate_sids:2081 __debug cnt = 6, cb->name: :vfe sid [0] = 1024
1018[    4.662767] ,
1019[    4.663122] CAM-SMMU cam_smmu_populate_sids:2081 __debug cnt = 6, cb->name: :vfe sid [1] = 10240
1020[    4.663122] ,
1021[    4.663123] iommu: Adding device soc:qcom,cam_smmu:msm_cam_smmu_cb3 to group 10
1022[    4.663936] CAM-SMMU cam_smmu_populate_sids:2081 __debug cnt = 3, cb->name: :cpp sid [0] = 7168
1023[    4.663936] ,
1024[    4.663936] iommu: Adding device soc:qcom,cam_smmu:msm_cam_smmu_cb4 to group 11
1025[    4.669851] CAM-SMMU cam_smmu_populate_sids:2081 __debug cnt = 3, cb->name: :jpeg_enc0 sid [0] = 6144
1026[    4.669851] ,
1027[    4.669851] msm_camera_get_dt_vreg_data:1125 number of entries is 0 or not present in dts
1028[    4.671830] msm_camera_get_dt_vreg_data:1125 number of entries is 0 or not present in dts
1029[    4.672491] msm_camera_get_dt_vreg_data:1125 number of entries is 0 or not present in dts
1030[    4.673054] msm_camera_get_dt_vreg_data:1125 number of entries is 0 or not present in dts
1031[    4.674845] msm_camera_get_dt_vreg_data:1125 number of entries is 0 or not present in dts
1032[    4.675550] msm_camera_get_dt_vreg_data:1125 number of entries is 0 or not present in dts
1033[    4.676207] msm_camera_get_dt_vreg_data:1125 number of entries is 0 or not present in dts
1034[    4.690212] MSM-CPP cpp_init_hardware:1133 CPP HW Version: 0x40030003
1035[    4.690224] MSM-CPP cpp_init_hardware:1151 stream_cnt:0
1036[    4.690587] MSM-CPP cpp_release_hardware:1214 cpp hw release done
1037[    4.696530] CAM-SOC msm_camera_get_reg_base:870 err: mem resource vfe_fuse not found
1038[    4.696535] CAM-SOC msm_camera_get_res_size:913 err: mem resource vfe_fuse not found
1039[    4.696964] msm_vfe47_get_clks: cannot find camss_vfe_stream_clk
1040[    4.698763] CAM-SOC msm_camera_get_reg_base:870 err: mem resource vfe_fuse not found
1041[    4.698767] CAM-SOC msm_camera_get_res_size:913 err: mem resource vfe_fuse not found
1042[    4.699182] msm_vfe47_get_clks: cannot find camss_vfe_stream_clk
1043[    4.704778] __msm_jpeg_init:1551] Jpeg Device id 0
1044[    4.704778] CHRDEV "jpeg0" major number 228 goes below the dynamic allocation range
1045[    4.714054] TYPEC: set_property_on_battery: no batt psy found
1046[    4.714060] TYPEC: ufp_detect_handler: failed to set TYPEC MODE on battery psy rc=-19
1047[    4.716481] TYPEC: qpnp_typec_probe: TypeC successfully probed state=18 CC-line-state=0
1048[    4.720261] thermal thermal_zone1: failed to read out thermal zone (-517)
1049[    4.754388] device-mapper: uevent: version 1.0.3
1050[    4.754968] device-mapper: ioctl: 4.35.0-ioctl (2016-06-23) initialised: dm-devel@redhat.com
1051[    4.755316] device-mapper: req-crypt: dm-req-crypt successfully initalized.
1052[    4.755316]
1053[    4.756725] CHRDEV "bt" major number 227 goes below the dynamic allocation range
1054[    4.757068] sdhci: Secure Digital Host Controller Interface driver
1055[    4.757071] sdhci: Copyright(c) Pierre Ossman
1056[    4.757075] sdhci-pltfm: SDHCI platform and OF driver helper
1057[    4.763068] tz_log 8600720.tz-log: Hyp log service is not supported
1058[    4.763532] usbcore: registered new interface driver usbhid
1059[    4.763535] usbhid: USB HID core driver
1060[    4.764073] ashmem: initialized
1061[    4.764743] qpnp_coincell_charger_show_state: enabled=Y, voltage=3200 mV, resistance=2100 ohm
1062[    4.775584] gpio = 1278
1063[    4.775607] vbus_det_irq = 84
1064[    4.775997] qcom,gpio-usbdetect soc:qcom,usb_detect: setting vbus notification
1065[    4.776048] qcom,gpio-usbdetect soc:qcom,usb_detect: otg enabled
1066[    4.776061] usbid_gpio = 1
1067[    4.776199] id_det_irq = 268
1068[    4.778755] bimc-bwmon 408000.qcom,cpu-bwmon: BW HWmon governor registered.
1069[    4.789131] coresight-tmc 6028000.tmc: failed to get flush cti
1070[    4.789138] coresight-tmc 6028000.tmc: failed to get reset cti
1071[    4.789150] coresight-tmc 6028000.tmc: failed to get csr, defer probe
1072[    4.789832] coresight-tmc 6027000.tmc: failed to get flush cti
1073[    4.789838] coresight-tmc 6027000.tmc: failed to get reset cti
1074[    4.789849] coresight-tmc 6027000.tmc: failed to get csr, defer probe
1075[    4.799228] coresight-etm4x 619c000.etm: CPU0: Cortex-A53 ETM v4.0 initialized
1076[    4.800752] coresight-etm4x 619d000.etm: CPU1: Cortex-A53 ETM v4.0 initialized
1077[    4.802297] coresight-etm4x 619e000.etm: CPU2: Cortex-A53 ETM v4.0 initialized
1078[    4.803843] coresight-etm4x 619f000.etm: CPU3: Cortex-A53 ETM v4.0 initialized
1079[    4.810110] coresight-etm4x 61bc000.etm: CPU4: Cortex-A53 ETM v4.0 initialized
1080[    4.811738] coresight-etm4x 61bd000.etm: CPU5: Cortex-A53 ETM v4.0 initialized
1081[    4.813377] coresight-etm4x 61be000.etm: CPU6: Cortex-A53 ETM v4.0 initialized
1082[    4.815048] coresight-etm4x 61bf000.etm: CPU7: Cortex-A53 ETM v4.0 initialized
1083[    4.816011] coresight-replicator-qcom 6026000.replicator: REPLICATOR 1.0 initialized
1084[    4.816844] coresight-stm 6002000.stm: stm_register_device failed, probing deffered
1085[    4.820388] OF: graph: no port node found in /soc/cti@6010000
1086[    4.820881] OF: graph: no port node found in /soc/cti@6011000
1087[    4.821345] OF: graph: no port node found in /soc/cti@6012000
1088[    4.821809] OF: graph: no port node found in /soc/cti@6013000
1089[    4.822275] OF: graph: no port node found in /soc/cti@6014000
1090[    4.822747] OF: graph: no port node found in /soc/cti@6015000
1091[    4.823214] OF: graph: no port node found in /soc/cti@6016000
1092[    4.823685] OF: graph: no port node found in /soc/cti@6017000
1093[    4.824158] OF: graph: no port node found in /soc/cti@6018000
1094[    4.824635] OF: graph: no port node found in /soc/cti@6019000
1095[    4.825122] OF: graph: no port node found in /soc/cti@601a000
1096[    4.825591] OF: graph: no port node found in /soc/cti@601b000
1097[    4.826066] OF: graph: no port node found in /soc/cti@601c000
1098[    4.826551] OF: graph: no port node found in /soc/cti@601d000
1099[    4.827034] OF: graph: no port node found in /soc/cti@601e000
1100[    4.827518] OF: graph: no port node found in /soc/cti@601f000
1101[    4.828005] OF: graph: no port node found in /soc/cti@6198000
1102[    4.828497] OF: graph: no port node found in /soc/cti@6199000
1103[    4.829005] OF: graph: no port node found in /soc/cti@619a000
1104[    4.829519] OF: graph: no port node found in /soc/cti@619b000
1105[    4.830054] OF: graph: no port node found in /soc/cti@61b8000
1106[    4.830615] OF: graph: no port node found in /soc/cti@61b9000
1107[    4.831226] OF: graph: no port node found in /soc/cti@61ba000
1108[    4.831844] OF: graph: no port node found in /soc/cti@61bb000
1109[    4.832487] OF: graph: no port node found in /soc/cti@6128000
1110[    4.832986] OF: graph: no port node found in /soc/cti@6124000
1111[    4.833474] OF: graph: no port node found in /soc/cti@6134000
1112[    4.833971] OF: graph: no port node found in /soc/cti@6139000
1113[    4.834471] OF: graph: no port node found in /soc/cti@613c000
1114[    4.834974] OF: graph: no port node found in /soc/cti@610c000
1115[    4.836508] coresight-dbgui 6108000.dbgui: DebugUI capture enabled
1116[    4.836870] coresight-dbgui 6108000.dbgui: DebugUI initializaed
1117[    4.838162] OF: graph: no port node found in /soc/csr@6001000
1118[    4.838430] coresight-csr 6001000.csr: CSR initialized: coresight-csr
1119[    4.839606] OF: graph: no port node found in /soc/hwevent@6101000
1120[    4.839887] coresight-hwevent 6101000.hwevent: Hardware Event driver initialized
1121[    4.842074] coresight-remote-etm soc:wcn_etm0: Remote ETM initialized
1122[    4.843143] coresight-remote-etm soc:rpm_etm0: Remote ETM initialized
1123[    4.844211] coresight-remote-etm soc:audio_etm0: Remote ETM initialized
1124[    4.845259] coresight-remote-etm soc:modem_etm0: Remote ETM initialized
1125[    4.846314] coresight-remote-etm soc:modem_etm1: Remote ETM initialized
1126[    4.848873] CHRDEV "sensors" major number 226 goes below the dynamic allocation range
1127[    4.851228] gpio_clk soc:qcom,gpioclk: gpio_set_clocks_default: set clock rate: 10000
1128[    4.851239] gpio_clk soc:qcom,gpioclk: gpio_clk_probe success
1129[    4.851398] proc create
1130[    4.851471] quec_devinfo init success!
1131[    4.851474] fulinux I am here
1132[    4.851889] usbcore: registered new interface driver snd-usb-audio
1133[    4.854035] u32 classifier
1134[    4.854039]     Actions configured
1135[    4.854057] Netfilter messages via NETLINK v0.30.
1136[    4.854569] nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
1137[    4.854831] ctnetlink v0.93: registering with nfnetlink.
1138[    4.856303] xt_time: kernel timezone is -0000
1139[    4.856388] IPv4 over IPsec tunneling driver
1140[    4.857563] ip_tables: (C) 2000-2006 Netfilter Core Team
1141[    4.857971] arp_tables: arp_tables: (C) 2002 David S. Miller
1142[    4.858117] Initializing XFRM netlink socket
1143[    4.859470] NET: Registered protocol family 10
1144[    4.861596] mip6: Mobile IPv6
1145[    4.861651] ip6_tables: (C) 2000-2006 Netfilter Core Team
1146[    4.863150] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver
1147[    4.865308] NET: Registered protocol family 17
1148[    4.865357] NET: Registered protocol family 15
1149[    4.865412] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this.
1150[    4.865420] Ebtables v2.0 registered
1151[    4.865580] l2tp_core: L2TP core driver, V2.0
1152[    4.865601] l2tp_ppp: PPPoL2TP kernel driver, V2.0
1153[    4.865605] l2tp_ip: L2TP IP encapsulation support (L2TPv3)
1154[    4.865631] l2tp_netlink: L2TP netlink interface
1155[    4.865707] l2tp_eth: L2TP ethernet pseudowire support (L2TPv3)
1156[    4.865769] l2tp_debugfs: L2TP debugfs support
1157[    4.865772] l2tp_ip6: L2TP IP encapsulation support for IPv6 (L2TPv3)
1158[    4.866205] sctp: Hash tables configured (bind 128/128)
1159[    4.867072] Key type dns_resolver registered
1160[    4.868452] NET: Registered protocol family 27
1161[    4.869077] spmi spmi-0: error: impermissible write to peripheral sid:0 addr:0xc441
1162[    4.869083] qcom-spmi-gpio 200f000.qcom,spmi:qcom,pm8953@0:pinctrl@c000: write 0x41 failed
1163[    4.869102] adv_vreg: Failed to request enable GPIO1277: -19
1164[    4.869117] reg-fixed-voltage soc:adv_vreg: Failed to register regulator: -19
1165[    4.892612] minidump-id not found for adsp
1166[    4.894804] minidump-id not found for wcnss
1167[    4.895082] subsys-pil-tz a21b000.qcom,pronto: for wcnss segments only will be dumped.
1168[    4.897371] minidump-id not found for modem
1169[    4.898557] pil-q6v5-mss 4080000.qcom,mss: for modem segments only will be dumped.
1170[    4.898756] pil-q6v5-mss 4080000.qcom,mss: for md_modem segments only will be dumped.
1171[    4.915109] sps:BAM 0x0000000007104000 is registered.
1172[    4.915110] msm-dwc3 7000000.ssusb: Could not get usb power_supply
1173[    4.915218] msm-dwc3 7000000.ssusb: Could not get usb psy
1174[    4.915591] CHRDEV "byte-cntr" major number 225 goes below the dynamic allocation range
1175[    4.919313] sps:BAM 0x0000000006044000 is registered.
1176[    4.919313] CHRDEV "6002000.stm" major number 224 goes below the dynamic allocation range
1177[    4.920056] coresight-stm 6002000.stm: STM32 initialized
1178[    4.929808] Registered cp15_barrier emulation handler
1179[    4.937017] Registered setend emulation handler
1180[    4.937945] registered taskstats version 1
1181[    4.937976] Loading compiled-in X.509 certificates
1182[    4.938652] kworker/u16:3 (354) used greatest stack depth: 13232 bytes left
1183[    4.941038] msm-dwc3 7000000.ssusb: DWC3 exited from low power mode
1184[    4.941316] Loaded X.509 cert 'Build time autogenerated kernel key: 52f1560989c898e3df9d1416f7b75d819a83031e'
1185[    4.948938] qcom,cc-debug-8953 1874000.qcom,cc-debug: Registered Debug Mux successfully
1186[    4.953096] msm_smem 86300000.qcom,smem: for smem segments only will be dumped.
1187[    4.958095] iommu: Adding device soc:qcom,msm_fastrpc:qcom,msm_fastrpc_compute_cb to group 12
1188[    4.960233] CHRDEV "adsprpc-smd" major number 223 goes below the dynamic allocation range
1189[    4.965320] qcom,qpnp-rtc 200f000.qcom,spmi:qcom,pm8953@0:qcom,pm8953_rtc: setting system clock to 1970-01-01 00:00:14 UTC (14)
1190[    4.968895] lpm_levels_of: idx 1 276
1191[    4.968922] lpm_levels_of: Residency < 0 for LPM
1192[    4.969502] lpm_levels_of: idx 1 286
1193[    4.969527] lpm_levels_of: Residency < 0 for LPM
1194[    4.970059] lpm_levels: register_cluster_lpm_stats()
1195[    4.970723] lpm_levels: register_cluster_lpm_stats()
1196[    4.979955] rmnet_ipa started initialization
1197[    4.979962] IPA SSR support = True
1198[    4.979966] IPA ipa-loaduC = True
1199[    4.979971] IPA SG support = True
1200[    4.979976] IPA Napi Enable = False
1201[    4.979982] using default for wan-rx-desc-size = 1024
1202[    4.983592] CHRDEV "wwan_ioctl" major number 222 goes below the dynamic allocation range
1203[    4.985396] ipa ipa_sps_irq_control_all:963 EP (5) not allocated.
1204[    4.985404] ipa ipa2_uc_state_check:302 uC is not loaded
1205[    4.986511] rmnet_ipa completed initialization
1206[    4.987200] RNDIS_IPA module is loaded.
1207[    4.987200] clock_late_init: Removing enables held for handed-off clocks
1208[    4.991977] apc_mem_acc_corner: disabling
1209[    4.991986] gfx_mem_acc_corner: disabling
1210[    4.992025] oem_otg_ext_vreg: disabling
1211[    4.992043] ALSA devic[    6.045739] device-mapper: init: attempting early device configuration.
1212[    6.047637] device-mapper: init: adding target '0 6192024 verity 1 PARTUUID=e146bf7c-a200-bcaf-f494-93511eb5ca30 PARTUUID=e146bf7c-a200-bcaf-f494-93511eb5ca30 4096 4096 774003 774003 sha1 92b7e152ca5bafcd6b043a4d29ac1ca084ada657 82c54ab345ec457dc4255f5fd453d897c0ce84a5 10 restart_on_corruption ignore_zero_blocks use_fec_from_device PARTUUID=e146bf7c-a200-bcaf-f494-93511eb5ca30 fec_roots 2 fec_blocks 780099 fec_start 780099'
1213[    6.066597] device-mapper: table: 253:0: verity: Data device lookup failed
1214[    6.088690] device-mapper: init: starting dm-0 (vroot) failed
1215[    6.096316] Unable to handle kernel NULL pointer dereference at virtual address 00000000
1216[    6.101522] pgd = ffffff908313d000
1217[    6.109575] [00000000] *pgd=000000008efe8003, *pud=000000008efe8003, *pmd=0000000000000000
1218[    6.120915] ------------[ cut here ]------------
1219[    6.121124] Kernel BUG at           (null) [verbose debug info unavailable]
1220[    6.125817] Internal error: Oops: 86000005 [#1] PREEMPT SMP
1221[    6.132496] Modules linked in:
1222[    6.141166] CPU: 4 PID: 1 Comm: swapper/0 Not tainted 4.9.112 #10
1223[    6.141266] Hardware name: Qualcomm Technologies, Inc. SDM450 NOPMI MTP (DT)
1224[    6.147346] task: ffffffdd6e520000 task.stack: ffffffdd6e46c000
1225[    6.154461] PC is at 0x0
1226[    6.160100] LR is at generic_make_request+0xf0/0x22c
1227[    6.162878] pc : [<0000000000000000>] lr : [<ffffff9080a5f664>] pstate: 60400005
1228[    6.167831] sp : ffffffdd6e46f6c0
1229[    6.175199] x29: ffffffdd6e46f6c0 x28: ffffff90827cb000
1230[    6.183524] x27: ffffff908256fce4 x26: 0000000000000000
1231[    6.188820] x25: ffffff908256f000 x24: ffffffdd6aeb0000
1232[    6.194115] x23: 00000000fffffffb x22: 00000000ffffffff
1233[    6.199409] x21: ffffff908256f000 x20: ffffffdd6aeda000
1234[    6.204704] x19: ffffffdd6e46f708 x18: 00000000eccbfa21
1235[    6.209999] x17: 0000000000000007 x16: ffffff9081809b70
1236[    6.215295] x15: ffffffffffffffff x14: 0000000000000000
1237[    6.220589] x13: 0000000000000000 x12: 0000000000000000
1238[    6.225886] x11: 0000000000000000 x10: 0000000000000000
1239[    6.231180] x9 : 0000000000000006 x8 : ffffff90820b2090
1240[    6.236476] x7 : 0000000000000000 x6 : 00000000087720aa
1241[    6.241770] x5 : 0000000000000000 x4 : 0000000000000000
1242[    6.247065] x3 : 0000000000000000 x2 : 0000000000000000
1243[    6.252362] x1 : ffffffdd6aeda000 x0 : ffffffdd6aeb0000
1244[    6.257658]
1245[    6.257658] LR: 0xffffff9080a5f624:
1246[    6.257842] f624  f904dc33 f9400680 52800001 f9405000 f9420418 aa1803e0 97ffff11 35000880
1247[    6.270851] f644  a9401664 f9405b02 aa1403e1 a9011664 f900067f aa1803e0 f900027f d63f0040
1248[    6.279009] f664  2a0003f6 aa1803e0 97ffff8d d2800003 d2800005 d2800002 d2800004 f9400260
1249[    6.287169] f684  b40001e0 f9400001 f9000261 b4000561 f9400401 f900001f f9405021 f9420421
1250[    6.295331]
1251[    6.295331] SP: 0xffffffdd6e46f680:
1252[    6.295429] f680  80a5f664 ffffff90 6e46f6c0 ffffffdd 00000000 00000000 60400005 00000000
1253[    6.308437] f6a0  00000001 00000000 80a5f83c ffffff90 ffffffff ffffffff 00040900 00000000
1254[    6.316596] f6c0  6e46f730 ffffffdd 80a5f858 ffffff90 6aeda000 ffffffdd 8256f000 ffffff90
1255[    6.324755] f6e0  00000002 00000000 6e520000 ffffffdd 00000000 00000000 00000000 00000000
1256[    6.332917] Process swapper/0 (pid: 1, stack limit = 0xffffffdd6e46c000)
1257[    6.333020] Call trace:
1258[    6.339782] Exception stack(0xffffffdd6e46f4d0 to 0xffffffdd6e46f600)
1259[    6.341963] f4c0:                                   ffffffdd6e46f708 0000007fffffffff
1260[    6.348564] f4e0: 0000000082b3f000 0000000000000000 0000000060400005 ffffff9082570000
1261[    6.356377] f500: ffffff9082570fb0 0000000002400040 ffffffdd6e46f560 ffffff90808527d8
1262[    6.364189] f520: ffffffdd6e46f550 ffffff908084713c ffffff90825b31b8 00000000ee46f000
1263[    6.372002] f540: ffffffdd6e520000 00000000ee46f000 ffffffdd6e46f580 ffffff90806922c0
1264[    6.379813] f560: ffffff908256f000 ffffff9080852a90 0000004cefde3000 ffffffdd71e95c30
1265[    6.387628] f580: ffffffdd6e46f5b0 0000000000040900 ffffffdd6aeb0000 ffffffdd6aeda000
1266[    6.395438] f5a0: 0000000000000000 0000000000000000 0000000000000000 0000000000000000
1267[    6.403252] f5c0: 00000000087720aa 0000000000000000 ffffff90820b2090 0000000000000006
1268[    6.411064] f5e0: 0000000000000000 0000000000000000 0000000000000000 0000000000000000
1269[    6.418874] [<          (null)>]           (null)
1270[    6.426681] [<ffffff9080a5f858>] submit_bio+0xb8/0x1e0
1271[    6.431372] [<ffffff90808a7eb8>] submit_bh_wbc.isra.40+0x134/0x1b4
1272[    6.436405] [<ffffff90808a86f4>] __bread_gfp+0xd8/0x168
1273[    6.442569] [<ffffff908093dab8>] ext4_fill_super+0x1c0/0x349c
1274[    6.447692] [<ffffff908086a500>] mount_bdev+0x1a0/0x1cc
1275[    6.453591] [<ffffff9080937d30>] ext4_mount+0x40/0x4c
1276[    6.458626] [<ffffff908086b3fc>] mount_fs+0x16c/0x198
1277[    6.463836] [<ffffff908088c8d0>] vfs_kern_mount+0x74/0x15c
1278[    6.468871] [<ffffff90808907b0>] do_mount+0x4fc/0xba8
1279[    6.474251] [<ffffff90808911e0>] SyS_mount+0xa4/0xfc
1280[    6.479376] [<ffffff9081f21164>] mount_block_root+0x124/0x2e8
1281[    6.484409] [<ffffff9081f214f8>] mount_root+0x74/0x84
1282[    6.490050] [<ffffff9081f2167c>] prepare_namespace+0x174/0x1b0
1283[    6.495086] [<ffffff9081f20eec>] kernel_init_freeable+0x238/0x270
1284[    6.500819] [<ffffff9081720174>] kernel_init+0x18/0x140
1285[    6.506977] [<ffffff9080684300>] ret_from_fork+0x10/0x50
1286[    6.512015] Code: bad PC value
1287[    6.517594] ---[ end trace c4910f1b07c3e17f ]---
1288[    6.520498] Kernel panic - not syncing: Attempted to kill init! exitcode=0x0000000b
1289[    6.520498]
1290[    6.525214] SMP: stopping secondary CPUs
1291[    6.534326] CPU6: stopping
1292[    6.538215] CPU: 6 PID: 0 Comm: swapper/6 Tainted: G      D         4.9.112 #10
1293[    6.540741] Hardware name: Qualcomm Technologies, Inc. SDM450 NOPMI MTP (DT)
1294[    6.547948] task: ffffffdd6e5abe00 task.stack: ffffffdd6e5bc000
1295[    6.555241] PC is at lpm_cpuidle_enter+0x208/0x508
1296[    6.560877] LR is at lpm_cpuidle_enter+0x204/0x508
1297[    6.565736] pc : [<ffffff90812241b8>] lr : [<ffffff90812241b4>] pstate: a0400145
1298[    6.570518] sp : ffffffdd6e5bfe60
1299[    6.578059] x29: ffffffdd6e5bfe60 x28: ffffff90826a7720
1300[    6.586384] x27: ffffffdd71e9ba10 x26: 0000000000000001
1301[    6.591680] x25: ffffff90820b8a10 x24: 00000000000082ba
1302[    6.596975] x23: ffffff90820b8000 x22: ffffffdd6add8418
1303[    6.602270] x21: ffffffdd6b35e868 x20: ffffffdd6b35e018
1304[    6.607564] x19: 0000000000000000 x18: 00000000eccbfa21
1305[    6.612860] x17: 0000000000000006 x16: ffffffdd71e9d658
1306[    6.618154] x15: ffffffdd6bcfbf00 x14: ffffffdd71e9d650
1307[    6.623450] x13: ffffffdd71e9d648 x12: ffffffdd71e9d640
1308[    6.628746] x11: 0000000000000000 x10: 0000000000000bb0
1309[    6.634040] x9 : 0000000000000006 x8 : ffffff90820b2090
1310[    6.639336] x7 : 0000000000000000 x6 : 000000000fe5909c
1311[    6.644631] x5 : 0002faf07f68a200 x4 : 0000000000000018
1312[    6.649925] x3 : 00000000000004c0 x2 : 0000004cefde3000
1313[    6.655221] x1 : 0000000000000001 x0 : ffffffdd6e5abe00
1314[    6.660516]
1315[    6.660516] PC: 0xffffff9081224178:
1316[    6.660701] 4178  110004a5 710010bf 1a9f90a5 b9002f65 9101a2b5 910502b5 b9400aa0 6b1f001f
1317[    6.673710] 4198  54000e8c 911c839c 3944c380 34000060 394ac2c0 35000160 97d65a0d d50342ff
1318[    6.681869] 41b8  2a1303e0 a94153f3 a9425bf5 a94363f7 a9446bf9 a94573fb a8c77bfd d65f03c0
1319[    6.690028] 41d8  d0007454 91020322 d538d083 91004281 912842e0 b8616863 91012000 52800001
1320[    6.698189]
1321[    6.698189] LR: 0xffffff9081224174:
1322[    6.698287] 4174  b9002b60 110004a5 710010bf 1a9f90a5 b9002f65 9101a2b5 910502b5 b9400aa0
1323[    6.711297] 4194  6b1f001f 54000e8c 911c839c 3944c380 34000060 394ac2c0 35000160 97d65a0d
1324[    6.719456] 41b4  d50342ff 2a1303e0 a94153f3 a9425bf5 a94363f7 a9446bf9 a94573fb a8c77bfd
1325[    6.727616] 41d4  d65f03c0 d0007454 91020322 d538d083 91004281 912842e0 b8616863 91012000
1326[    6.735777]
1327[    6.735777] SP: 0xffffffdd6e5bfe20:
1328[    6.735875] fe20  812241b4 ffffff90 6e5bfe60 ffffffdd 812241b8 ffffff90 a0400145 00000000
1329[    6.748884] fe40  6b35e868 ffffffdd 6add8418 ffffffdd ffffffff ffffffff 000082ba 00000000
1330[    6.757043] fe60  6e5bfed0 ffffffdd 8121ceb4 ffffff90 6add9418 ffffffdd 71e9b830 ffffffdd
1331[    6.765203] fe80  00000000 00000000 6add9400 ffffffdd 82710970 ffffff90 00000000 00000000
1332[    6.773364] CPU: 6 PID: 0 Comm: swapper/6 Tainted: G      D         4.9.112 #10
1333[    6.773468] Hardware name: Qualcomm Technologies, Inc. SDM450 NOPMI MTP (DT)
1334[    6.780586] Call trace:
1335[    6.787869] [<ffffff908068dc98>] dump_backtrace+0x0/0x2b8
1336[    6.790046] [<ffffff908068e1ec>] show_stack+0x20/0x28
1337[    6.795600] [<ffffff9080a8ab54>] dump_stack+0xb8/0xf4
1338[    6.800635] [<ffffff9080695e78>] handle_IPI+0x37c/0x388
1339[    6.805669] [<ffffff9080681c38>] gic_handle_irq+0xb8/0xe0
1340[    6.810704] Exception stack(0xffffffdd6e5bfd30 to 0xffffffdd6e5bfe60)
1341[    6.816262] fd20:                                   ffffffdd6e5abe00 0000000000000001
1342[    6.822690] fd40: 0000004cefde3000 00000000000004c0 0000000000000018 0002faf07f68a200
1343[    6.830502] fd60: 000000000fe5909c 0000000000000000 ffffff90820b2090 0000000000000006
1344[    6.838316] fd80: 0000000000000bb0 0000000000000000 ffffffdd71e9d640 ffffffdd71e9d648
1345[    6.846128] fda0: ffffffdd71e9d650 ffffffdd6bcfbf00 ffffffdd71e9d658 0000000000000006
1346[    6.853941] fdc0: 00000000eccbfa21 0000000000000000 ffffffdd6b35e018 ffffffdd6b35e868
1347[    6.861754] fde0: ffffffdd6add8418 ffffff90820b8000 00000000000082ba ffffff90820b8a10
1348[    6.869566] fe00: 0000000000000001 ffffffdd71e9ba10 ffffff90826a7720 ffffffdd6e5bfe60
1349[    6.877378] fe20: ffffff90812241b4 ffffffdd6e5bfe60 ffffff90812241b8 00000000a0400145
1350[    6.885190] fe40: ffffffdd6b35e868 ffffffdd6add8418 ffffffffffffffff 00000000000082ba
1351[    6.893002] [<ffffff9080683a2c>] el1_irq+0xec/0x194
1352[    6.900807] [<ffffff90812241b8>] lpm_cpuidle_enter+0x208/0x508
1353[    6.905497] [<ffffff908121ceb4>] cpuidle_enter_state+0xa4/0x3b4
1354[    6.911399] [<ffffff908121d238>] cpuidle_enter+0x34/0x40
1355[    6.917216] [<ffffff908071de78>] cpu_startup_entry+0x158/0x21c
1356[    6.922772] [<ffffff9080695514>] secondary_start_kernel+0x19c/0x21c
1357[    6.928415] [<000000008112a1a4>] 0x8112a1a4
1358[    6.934572] CPU0: stopping
1359[    6.938738] CPU: 0 PID: 0 Comm: swapper/0 Tainted: G      D         4.9.112 #10
1360[    6.941523] Hardware name: Qualcomm Technologies, Inc. SDM450 NOPMI MTP (DT)
1361[    6.948729] task: ffffff9082583380 task.stack: ffffff9082560000
1362[    6.956025] PC is at lpm_cpuidle_enter+0x208/0x508
1363[    6.961657] LR is at lpm_cpuidle_enter+0x204/0x508
1364[    6.966519] pc : [<ffffff90812241b8>] lr : [<ffffff90812241b4>] pstate: a0400005
1365[    6.971299] sp : ffffff9082563df0
1366[    6.978840] x29: ffffff9082563df0 x28: ffffff90826a7720
1367[    6.987165] x27: ffffffdd71e11a10 x26: 0000000000000001
1368[    6.992461] x25: ffffff90820b8a10 x24: 0000000000076e42
1369[    6.997755] x23: ffffff90820b8000 x22: ffffffdd6add8018
1370[    7.003050] x21: ffffffdd6b35d868 x20: ffffffdd6b35d018
1371[    7.008346] x19: 0000000000000000 x18: ffffffdd71e12c80
1372[    7.013641] x17: 0000000000000000 x16: ffffffdd71e13658
1373[    7.018935] x15: 0000000000000001 x14: ffffffdd71e13650
1374[    7.024230] x13: ffffffdd71e13648 x12: ffffffdd71e13640
1375[    7.029526] x11: 0000000000000000 x10: 0000000000000bb0
1376[    7.034821] x9 : 0000000000000000 x8 : ffffff90820b2090
1377[    7.040117] x7 : 0000000000000000 x6 : 000000000feb6c9c
1378[    7.045412] x5 : 00042c1d7f66ae00 x4 : 0000000000000018
1379[    7.050706] x3 : 00000000000004c2 x2 : 0000004cefd59000
1380[    7.056002] x1 : 0000000000000001 x0 : ffffff9082583380
1381[    7.061297]
1382[    7.061297] PC: 0xffffff9081224178:
1383[    7.061483] 4178  110004a5 710010bf 1a9f90a5 b9002f65 9101a2b5 910502b5 b9400aa0 6b1f001f
1384[    7.074490] 4198  54000e8c 911c839c 3944c380 34000060 394ac2c0 35000160 97d65a0d d50342ff
1385[    7.082651] 41b8  2a1303e0 a94153f3 a9425bf5 a94363f7 a9446bf9 a94573fb a8c77bfd d65f03c0
1386[    7.090810] 41d8  d0007454 91020322 d538d083 91004281 912842e0 b8616863 91012000 52800001
1387[    7.098971]
1388[    7.098971] LR: 0xffffff9081224174:
1389[    7.099069] 4174  b9002b60 110004a5 710010bf 1a9f90a5 b9002f65 9101a2b5 910502b5 b9400aa0
1390[    7.112077] 4194  6b1f001f 54000e8c 911c839c 3944c380 34000060 394ac2c0 35000160 97d65a0d
1391[    7.120237] 41b4  d50342ff 2a1303e0 a94153f3 a9425bf5 a94363f7 a9446bf9 a94573fb a8c77bfd
1392[    7.128396] 41d4  d65f03c0 d0007454 91020322 d538d083 91004281 912842e0 b8616863 91012000
1393[    7.136557]
1394[    7.136557] SP: 0xffffff9082563db0:
1395[    7.136657] 3db0  812241b4 ffffff90 82563df0 ffffff90 812241b8 ffffff90 a0400005 00000000
1396[    7.149665] 3dd0  6b35d868 ffffffdd 6add8018 ffffffdd ffffffff ffffffff 00076e42 00000000
1397[    7.157824] 3df0  82563e60 ffffff90 8121ceb4 ffffff90 6add9818 ffffffdd 71e11830 ffffffdd
1398[    7.165983] 3e10  00000000 00000000 6add9800 ffffffdd 82710970 ffffff90 00000000 00000000
1399[    7.174146] CPU: 0 PID: 0 Comm: swapper/0 Tainted: G      D         4.9.112 #10
1400[    7.174250] Hardware name: Qualcomm Technologies, Inc. SDM450 NOPMI MTP (DT)
1401[    7.181368] Call trace:
1402[    7.188650] [<ffffff908068dc98>] dump_backtrace+0x0/0x2b8
1403[    7.190827] [<ffffff908068e1ec>] show_stack+0x20/0x28
1404[    7.196383] [<ffffff9080a8ab54>] dump_stack+0xb8/0xf4
1405[    7.201418] [<ffffff9080695e78>] handle_IPI+0x37c/0x388
1406[    7.206450] [<ffffff9080681c38>] gic_handle_irq+0xb8/0xe0
1407[    7.211485] Exception stack(0xffffff9082563cc0 to 0xffffff9082563df0)
1408[    7.217046] 3cc0: ffffff9082583380 0000000000000001 0000004cefd59000 00000000000004c2
1409[    7.223471] 3ce0: 0000000000000018 00042c1d7f66ae00 000000000feb6c9c 0000000000000000
1410[    7.231285] 3d00: ffffff90820b2090 0000000000000000 0000000000000bb0 0000000000000000
1411[    7.239097] 3d20: ffffffdd71e13640 ffffffdd71e13648 ffffffdd71e13650 0000000000000001
1412[    7.246909] 3d40: ffffffdd71e13658 0000000000000000 ffffffdd71e12c80 0000000000000000
1413[    7.254722] 3d60: ffffffdd6b35d018 ffffffdd6b35d868 ffffffdd6add8018 ffffff90820b8000
1414[    7.262534] 3d80: 0000000000076e42 ffffff90820b8a10 0000000000000001 ffffffdd71e11a10
1415[    7.270347] 3da0: ffffff90826a7720 ffffff9082563df0 ffffff90812241b4 ffffff9082563df0
1416[    7.278160] 3dc0: ffffff90812241b8 00000000a0400005 ffffffdd6b35d868 ffffffdd6add8018
1417[    7.285971] 3de0: ffffffffffffffff 0000000000076e42
1418[    7.293776] [<ffffff9080683a2c>] el1_irq+0xec/0x194
1419[    7.298462] [<ffffff90812241b8>] lpm_cpuidle_enter+0x208/0x508
1420[    7.303327] [<ffffff908121ceb4>] cpuidle_enter_state+0xa4/0x3b4
1421[    7.309229] [<ffffff908121d238>] cpuidle_enter+0x34/0x40
1422[    7.315046] [<ffffff908071de78>] cpu_startup_entry+0x158/0x21c
1423[    7.320605] [<ffffff9081720154>] rest_init+0x80/0x88
1424[    7.326245] [<ffffff9081f20c5c>] start_kernel+0x3b4/0x40c
1425[    7.331365] [<ffffff9081f201e8>] __primary_switched+0x64/0x90
1426[    7.336661] CPU5: stopping
1427[    7.342388] CPU: 5 PID: 0 Comm: swapper/5 Tainted: G      D         4.9.112 #10
1428[    7.344996] Hardware name: Qualcomm Technologies, Inc. SDM450 NOPMI MTP (DT)
1429[    7.352201] task: ffffffdd6e5aae80 task.stack: ffffffdd6e5b8000
1430[    7.359497] PC is at lpm_cpuidle_enter+0x208/0x508
1431[    7.365130] LR is at lpm_cpuidle_enter+0x204/0x508
1432[    7.369991] pc : [<ffffff90812241b8>] lr : [<ffffff90812241b4>] pstate: a0400005
1433[    7.374770] sp : ffffffdd6e5bbe60
1434[    7.382312] x29: ffffffdd6e5bbe60 x28: ffffff90826a7720
1435[    7.390638] x27: ffffffdd71e84a10 x26: 0000000000000001
1436[    7.395933] x25: ffffff90820b8a10 x24: 00000000000033ee
1437[    7.401228] x23: ffffff90820b8000 x22: ffffffdd6add8418
1438[    7.406523] x21: ffffffdd6b35e868 x20: ffffffdd6b35e018
1439[    7.411817] x19: 0000000000000000 x18: 00000000e5f52687
1440[    7.417113] x17: 0000000000000005 x16: ffffffdd71e86658
1441[    7.422409] x15: ffffffdd6de72000 x14: ffffffdd71e86650
1442[    7.427702] x13: ffffffdd71e86648 x12: ffffffdd71e86640
1443[    7.432999] x11: 0000000000000000 x10: 0000000000000bb0
1444[    7.438294] x9 : 0000000000000005 x8 : ffffff90820b2090