· 6 years ago · Mar 26, 2020, 05:40 PM
1root@debian:/var/log/lightdm# dmesg
2[ 0.000000] Linux version 4.19.0-8-amd64 (debian-kernel@lists.debian.org) (gcc version 8.3.0 (Debian 8.3.0-6)) #1 SMP Debian 4.19.98-1 (2020-01-26)
3[ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-4.19.0-8-amd64 root=UUID=52dae700-2697-434f-8e40-f678eb385bda ro mitigations=off quiet
4[ 0.000000] x86/fpu: x87 FPU will use FXSAVE
5[ 0.000000] BIOS-provided physical RAM map:
6[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009f7ff] usable
7[ 0.000000] BIOS-e820: [mem 0x000000000009f800-0x000000000009ffff] reserved
8[ 0.000000] BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved
9[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000dfedffff] usable
10[ 0.000000] BIOS-e820: [mem 0x00000000dfee0000-0x00000000dfee2fff] ACPI NVS
11[ 0.000000] BIOS-e820: [mem 0x00000000dfee3000-0x00000000dfeeffff] ACPI data
12[ 0.000000] BIOS-e820: [mem 0x00000000dfef0000-0x00000000dfefffff] reserved
13[ 0.000000] BIOS-e820: [mem 0x00000000f0000000-0x00000000f3ffffff] reserved
14[ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000ffffffff] reserved
15[ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000011fffffff] usable
16[ 0.000000] NX (Execute Disable) protection: active
17[ 0.000000] SMBIOS 2.4 present.
18[ 0.000000] DMI: Gigabyte Technology Co., Ltd. P31-DS3L/P31-DS3L, BIOS F10A 07/30/2008
19[ 0.000000] tsc: Fast TSC calibration using PIT
20[ 0.000000] tsc: Detected 2400.037 MHz processor
21[ 0.002772] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
22[ 0.002774] e820: remove [mem 0x000a0000-0x000fffff] usable
23[ 0.002780] last_pfn = 0x120000 max_arch_pfn = 0x400000000
24[ 0.002786] MTRR default type: uncachable
25[ 0.002787] MTRR fixed ranges enabled:
26[ 0.002788] 00000-9FFFF write-back
27[ 0.002789] A0000-BFFFF uncachable
28[ 0.002790] C0000-CCFFF write-protect
29[ 0.002791] CD000-EFFFF uncachable
30[ 0.002792] F0000-FFFFF write-through
31[ 0.002793] MTRR variable ranges enabled:
32[ 0.002794] 0 base 000000000 mask F00000000 write-back
33[ 0.002796] 1 base 0E0000000 mask FE0000000 uncachable
34[ 0.002797] 2 base 100000000 mask FE0000000 write-back
35[ 0.002798] 3 base 0DFF00000 mask FFFF00000 uncachable
36[ 0.002799] 4 disabled
37[ 0.002800] 5 disabled
38[ 0.002800] 6 disabled
39[ 0.002801] 7 disabled
40[ 0.004014] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WP UC- WT
41[ 0.004121] e820: update [mem 0xdff00000-0xffffffff] usable ==> reserved
42[ 0.004126] last_pfn = 0xdfee0 max_arch_pfn = 0x400000000
43[ 0.009980] found SMP MP-table at [mem 0x000f4ec0-0x000f4ecf]
44[ 0.021583] Kernel/User page tables isolation: disabled on command line.
45[ 0.021586] BRK [0xd4401000, 0xd4401fff] PGTABLE
46[ 0.021589] BRK [0xd4402000, 0xd4402fff] PGTABLE
47[ 0.021590] BRK [0xd4403000, 0xd4403fff] PGTABLE
48[ 0.021615] BRK [0xd4404000, 0xd4404fff] PGTABLE
49[ 0.021617] BRK [0xd4405000, 0xd4405fff] PGTABLE
50[ 0.021828] RAMDISK: [mem 0x339a3000-0x35cc8fff]
51[ 0.021835] ACPI: Early table checksum verification disabled
52[ 0.024776] ACPI: RSDP 0x00000000000F6890 000014 (v00 GBT )
53[ 0.024780] ACPI: RSDT 0x00000000DFEE3040 000038 (v01 GBT GBTUACPI 42302E31 GBTU 01010101)
54[ 0.024786] ACPI: FACP 0x00000000DFEE30C0 000074 (v01 GBT GBTUACPI 42302E31 GBTU 01010101)
55[ 0.024792] ACPI: DSDT 0x00000000DFEE3180 003957 (v01 GBT GBTUACPI 00001000 MSFT 0100000C)
56[ 0.024796] ACPI: FACS 0x00000000DFEE0000 000040
57[ 0.024799] ACPI: HPET 0x00000000DFEE6C40 000038 (v01 GBT GBTUACPI 42302E31 GBTU 00000098)
58[ 0.024803] ACPI: MCFG 0x00000000DFEE6CC0 00003C (v01 GBT GBTUACPI 42302E31 GBTU 01010101)
59[ 0.024807] ACPI: APIC 0x00000000DFEE6B40 000084 (v01 GBT GBTUACPI 42302E31 GBTU 01010101)
60[ 0.024810] ACPI: SSDT 0x00000000DFEE7620 0003AB (v01 PmRef CpuPm 00003000 INTL 20040311)
61[ 0.024822] ACPI: Local APIC address 0xfee00000
62[ 0.024900] No NUMA configuration found
63[ 0.024901] Faking a node at [mem 0x0000000000000000-0x000000011fffffff]
64[ 0.024906] NODE_DATA(0) allocated [mem 0x11fff7000-0x11fffbfff]
65[ 0.024937] Zone ranges:
66[ 0.024938] DMA [mem 0x0000000000001000-0x0000000000ffffff]
67[ 0.024939] DMA32 [mem 0x0000000001000000-0x00000000ffffffff]
68[ 0.024941] Normal [mem 0x0000000100000000-0x000000011fffffff]
69[ 0.024942] Device empty
70[ 0.024943] Movable zone start for each node
71[ 0.024944] Early memory node ranges
72[ 0.024945] node 0: [mem 0x0000000000001000-0x000000000009efff]
73[ 0.024946] node 0: [mem 0x0000000000100000-0x00000000dfedffff]
74[ 0.024947] node 0: [mem 0x0000000100000000-0x000000011fffffff]
75[ 0.024950] Reserved but unavailable: 98 pages
76[ 0.024952] Initmem setup node 0 [mem 0x0000000000001000-0x000000011fffffff]
77[ 0.024954] On node 0 totalpages: 1048190
78[ 0.024955] DMA zone: 64 pages used for memmap
79[ 0.024955] DMA zone: 21 pages reserved
80[ 0.024957] DMA zone: 3998 pages, LIFO batch:0
81[ 0.025068] DMA32 zone: 14268 pages used for memmap
82[ 0.025069] DMA32 zone: 913120 pages, LIFO batch:63
83[ 0.056959] Normal zone: 2048 pages used for memmap
84[ 0.056961] Normal zone: 131072 pages, LIFO batch:31
85[ 0.061756] ACPI: PM-Timer IO Port: 0x408
86[ 0.061760] ACPI: Local APIC address 0xfee00000
87[ 0.061770] ACPI: LAPIC_NMI (acpi_id[0x00] dfl dfl lint[0x1])
88[ 0.061771] ACPI: LAPIC_NMI (acpi_id[0x01] dfl dfl lint[0x1])
89[ 0.061772] ACPI: LAPIC_NMI (acpi_id[0x02] dfl dfl lint[0x1])
90[ 0.061773] ACPI: LAPIC_NMI (acpi_id[0x03] dfl dfl lint[0x1])
91[ 0.061784] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
92[ 0.061786] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
93[ 0.061788] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
94[ 0.061790] ACPI: IRQ0 used by override.
95[ 0.061791] ACPI: IRQ9 used by override.
96[ 0.061793] Using ACPI (MADT) for SMP configuration information
97[ 0.061795] ACPI: HPET id: 0x8086a201 base: 0xfed00000
98[ 0.061803] smpboot: Allowing 4 CPUs, 0 hotplug CPUs
99[ 0.061822] PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
100[ 0.061823] PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff]
101[ 0.061824] PM: Registered nosave memory: [mem 0x000a0000-0x000effff]
102[ 0.061825] PM: Registered nosave memory: [mem 0x000f0000-0x000fffff]
103[ 0.061827] PM: Registered nosave memory: [mem 0xdfee0000-0xdfee2fff]
104[ 0.061827] PM: Registered nosave memory: [mem 0xdfee3000-0xdfeeffff]
105[ 0.061828] PM: Registered nosave memory: [mem 0xdfef0000-0xdfefffff]
106[ 0.061829] PM: Registered nosave memory: [mem 0xdff00000-0xefffffff]
107[ 0.061830] PM: Registered nosave memory: [mem 0xf0000000-0xf3ffffff]
108[ 0.061831] PM: Registered nosave memory: [mem 0xf4000000-0xfebfffff]
109[ 0.061831] PM: Registered nosave memory: [mem 0xfec00000-0xffffffff]
110[ 0.061834] [mem 0xdff00000-0xefffffff] available for PCI devices
111[ 0.061835] Booting paravirtualized kernel on bare hardware
112[ 0.061840] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns
113[ 0.226737] random: get_random_bytes called from start_kernel+0x93/0x52c with crng_init=0
114[ 0.226747] setup_percpu: NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:4 nr_node_ids:1
115[ 0.227485] percpu: Embedded 45 pages/cpu s144408 r8192 d31720 u524288
116[ 0.227493] pcpu-alloc: s144408 r8192 d31720 u524288 alloc=1*2097152
117[ 0.227495] pcpu-alloc: [0] 0 1 2 3
118[ 0.227524] Built 1 zonelists, mobility grouping on. Total pages: 1031789
119[ 0.227526] Policy zone: Normal
120[ 0.227528] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-4.19.0-8-amd64 root=UUID=52dae700-2697-434f-8e40-f678eb385bda ro mitigations=off quiet
121[ 0.247624] Calgary: detecting Calgary via BIOS EBDA area
122[ 0.247626] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
123[ 0.287233] Memory: 3999672K/4192760K available (10252K kernel code, 1241K rwdata, 3320K rodata, 1592K init, 2276K bss, 193088K reserved, 0K cma-reserved)
124[ 0.287382] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
125[ 0.287397] ftrace: allocating 31847 entries in 125 pages
126[ 0.305183] rcu: Hierarchical RCU implementation.
127[ 0.305186] rcu: RCU restricting CPUs from NR_CPUS=512 to nr_cpu_ids=4.
128[ 0.305187] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
129[ 0.308859] NR_IRQS: 33024, nr_irqs: 456, preallocated irqs: 16
130[ 0.312720] Console: colour VGA+ 80x25
131[ 0.312726] console [tty0] enabled
132[ 0.312748] ACPI: Core revision 20180810
133[ 0.312910] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484882848 ns
134[ 0.312918] hpet clockevent registered
135[ 0.312924] APIC: Switch to symmetric I/O mode setup
136[ 0.313286] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
137[ 0.332922] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x22985a87e67, max_idle_ns: 440795315743 ns
138[ 0.332937] Calibrating delay loop (skipped), value calculated using timer frequency.. 4800.07 BogoMIPS (lpj=9600148)
139[ 0.332939] pid_max: default: 32768 minimum: 301
140[ 0.332978] Security Framework initialized
141[ 0.332979] Yama: disabled by default; enable with sysctl kernel.yama.*
142[ 0.333000] AppArmor: AppArmor initialized
143[ 0.334539] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
144[ 0.335639] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
145[ 0.335703] Mount-cache hash table entries: 8192 (order: 4, 65536 bytes)
146[ 0.335739] Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes)
147[ 0.336093] CPU0: Thermal monitoring enabled (TM2)
148[ 0.336096] process: using mwait in idle threads
149[ 0.336101] Last level iTLB entries: 4KB 128, 2MB 4, 4MB 4
150[ 0.336102] Last level dTLB entries: 4KB 256, 2MB 0, 4MB 32, 1GB 0
151[ 0.336106] Speculative Store Bypass: Vulnerable
152[ 0.336281] Freeing SMP alternatives memory: 24K
153[ 0.448519] smpboot: CPU0: Intel(R) Core(TM)2 Quad CPU Q6600 @ 2.40GHz (family: 0x6, model: 0xf, stepping: 0xb)
154[ 0.448663] Performance Events: PEBS fmt0+, Core2 events, Intel PMU driver.
155[ 0.448669] core: PEBS disabled due to CPU errata
156[ 0.448672] ... version: 2
157[ 0.448673] ... bit width: 40
158[ 0.448674] ... generic registers: 2
159[ 0.448675] ... value mask: 000000ffffffffff
160[ 0.448676] ... max period: 000000007fffffff
161[ 0.448676] ... fixed-purpose events: 3
162[ 0.448677] ... event mask: 0000000700000003
163[ 0.448724] rcu: Hierarchical SRCU implementation.
164[ 0.448924] NMI watchdog: Enabled. Permanently consumes one hw-PMU counter.
165[ 0.448924] smp: Bringing up secondary CPUs ...
166[ 0.448924] x86: Booting SMP configuration:
167[ 0.448924] .... node #0, CPUs: #1 #2 #3
168[ 0.452999] smp: Brought up 1 node, 4 CPUs
169[ 0.452999] smpboot: Max logical packages: 1
170[ 0.452999] smpboot: Total of 4 processors activated (19200.29 BogoMIPS)
171[ 0.457281] devtmpfs: initialized
172[ 0.457281] x86/mm: Memory block size: 128MB
173[ 0.457675] PM: Registering ACPI NVS region [mem 0xdfee0000-0xdfee2fff] (12288 bytes)
174[ 0.457675] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
175[ 0.457675] futex hash table entries: 1024 (order: 4, 65536 bytes)
176[ 0.457675] pinctrl core: initialized pinctrl subsystem
177[ 0.457675] NET: Registered protocol family 16
178[ 0.457675] audit: initializing netlink subsys (disabled)
179[ 0.457675] audit: type=2000 audit(1585243284.144:1): state=initialized audit_enabled=0 res=1
180[ 0.457675] cpuidle: using governor ladder
181[ 0.457675] cpuidle: using governor menu
182[ 0.457675] ACPI: bus type PCI registered
183[ 0.457675] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
184[ 0.457675] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf0000000-0xf3ffffff] (base 0xf0000000)
185[ 0.457675] PCI: MMCONFIG at [mem 0xf0000000-0xf3ffffff] reserved in E820
186[ 0.457675] pmd_set_huge: Cannot satisfy [mem 0xf0000000-0xf0200000] with a huge-page mapping due to MTRR override.
187[ 0.457675] PCI: Using configuration type 1 for base access
188[ 0.460983] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
189[ 0.461054] ACPI: Added _OSI(Module Device)
190[ 0.461055] ACPI: Added _OSI(Processor Device)
191[ 0.461056] ACPI: Added _OSI(3.0 _SCP Extensions)
192[ 0.461057] ACPI: Added _OSI(Processor Aggregator Device)
193[ 0.461062] ACPI: Added _OSI(Linux-Dell-Video)
194[ 0.461064] ACPI: Added _OSI(Linux-Lenovo-NV-HDMI-Audio)
195[ 0.462684] ACPI: 2 ACPI AML tables successfully acquired and loaded
196[ 0.465144] ACPI: Dynamic OEM Table Load:
197[ 0.465152] ACPI: SSDT 0xFFFF93E3DAA1D400 00022A (v01 PmRef Cpu0Ist 00003000 INTL 20040311)
198[ 0.465324] ACPI: Dynamic OEM Table Load:
199[ 0.465327] ACPI: SSDT 0xFFFF93E3DAA21400 000152 (v01 PmRef Cpu1Ist 00003000 INTL 20040311)
200[ 0.465463] ACPI: Dynamic OEM Table Load:
201[ 0.465467] ACPI: SSDT 0xFFFF93E3DAA20200 000152 (v01 PmRef Cpu2Ist 00003000 INTL 20040311)
202[ 0.465601] ACPI: Dynamic OEM Table Load:
203[ 0.465605] ACPI: SSDT 0xFFFF93E3DAA21E00 000152 (v01 PmRef Cpu3Ist 00003000 INTL 20040311)
204[ 0.465886] ACPI: Interpreter enabled
205[ 0.465907] ACPI: (supports S0 S3 S4 S5)
206[ 0.465909] ACPI: Using IOAPIC for interrupt routing
207[ 0.465940] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
208[ 0.466089] ACPI: Enabled 8 GPEs in block 00 to 1F
209[ 0.470499] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3f])
210[ 0.470505] acpi PNP0A03:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
211[ 0.470509] acpi PNP0A03:00: _OSC failed (AE_NOT_FOUND); disabling ASPM
212[ 0.470719] PCI host bridge to bus 0000:00
213[ 0.470721] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window]
214[ 0.470723] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window]
215[ 0.470725] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
216[ 0.470726] pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000dffff window]
217[ 0.470727] pci_bus 0000:00: root bus resource [mem 0xdff00000-0xfebfffff window]
218[ 0.470729] pci_bus 0000:00: root bus resource [bus 00-3f]
219[ 0.470738] pci 0000:00:00.0: [8086:29c0] type 00 class 0x060000
220[ 0.470844] pci 0000:00:01.0: [8086:29c1] type 01 class 0x060400
221[ 0.470883] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
222[ 0.470988] pci 0000:00:1b.0: [8086:27d8] type 00 class 0x040300
223[ 0.471007] pci 0000:00:1b.0: reg 0x10: [mem 0xfa000000-0xfa003fff 64bit]
224[ 0.471070] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
225[ 0.471164] pci 0000:00:1c.0: [8086:27d0] type 01 class 0x060400
226[ 0.471232] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
227[ 0.471331] pci 0000:00:1c.3: [8086:27d6] type 01 class 0x060400
228[ 0.471398] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
229[ 0.471503] pci 0000:00:1d.0: [8086:27c8] type 00 class 0x0c0300
230[ 0.471541] pci 0000:00:1d.0: reg 0x20: [io 0xe000-0xe01f]
231[ 0.471636] pci 0000:00:1d.1: [8086:27c9] type 00 class 0x0c0300
232[ 0.471674] pci 0000:00:1d.1: reg 0x20: [io 0xe100-0xe11f]
233[ 0.471770] pci 0000:00:1d.2: [8086:27ca] type 00 class 0x0c0300
234[ 0.471807] pci 0000:00:1d.2: reg 0x20: [io 0xe200-0xe21f]
235[ 0.471905] pci 0000:00:1d.3: [8086:27cb] type 00 class 0x0c0300
236[ 0.471943] pci 0000:00:1d.3: reg 0x20: [io 0xe300-0xe31f]
237[ 0.472044] pci 0000:00:1d.7: [8086:27cc] type 00 class 0x0c0320
238[ 0.472062] pci 0000:00:1d.7: reg 0x10: [mem 0xfa004000-0xfa0043ff]
239[ 0.472210] pci 0000:00:1e.0: [8086:244e] type 01 class 0x060401
240[ 0.472335] pci 0000:00:1f.0: [8086:27b8] type 00 class 0x060100
241[ 0.472409] pci 0000:00:1f.0: quirk: [io 0x0400-0x047f] claimed by ICH6 ACPI/GPIO/TCO
242[ 0.472413] pci 0000:00:1f.0: quirk: [io 0x0480-0x04bf] claimed by ICH6 GPIO
243[ 0.472416] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 1 PIO at 0800 (mask 000f)
244[ 0.472419] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 2 PIO at 0290 (mask 000f)
245[ 0.472524] pci 0000:00:1f.1: [8086:27df] type 00 class 0x01018a
246[ 0.472538] pci 0000:00:1f.1: reg 0x10: [io 0x0000-0x0007]
247[ 0.472546] pci 0000:00:1f.1: reg 0x14: [io 0x0000-0x0003]
248[ 0.472554] pci 0000:00:1f.1: reg 0x18: [io 0x0000-0x0007]
249[ 0.472561] pci 0000:00:1f.1: reg 0x1c: [io 0x0000-0x0003]
250[ 0.472569] pci 0000:00:1f.1: reg 0x20: [io 0xf000-0xf00f]
251[ 0.472585] pci 0000:00:1f.1: legacy IDE quirk: reg 0x10: [io 0x01f0-0x01f7]
252[ 0.472587] pci 0000:00:1f.1: legacy IDE quirk: reg 0x14: [io 0x03f6]
253[ 0.472588] pci 0000:00:1f.1: legacy IDE quirk: reg 0x18: [io 0x0170-0x0177]
254[ 0.472589] pci 0000:00:1f.1: legacy IDE quirk: reg 0x1c: [io 0x0376]
255[ 0.472673] pci 0000:00:1f.2: [8086:27c0] type 00 class 0x01018f
256[ 0.472687] pci 0000:00:1f.2: reg 0x10: [io 0xe800-0xe807]
257[ 0.472694] pci 0000:00:1f.2: reg 0x14: [io 0xe900-0xe903]
258[ 0.472700] pci 0000:00:1f.2: reg 0x18: [io 0xea00-0xea07]
259[ 0.472707] pci 0000:00:1f.2: reg 0x1c: [io 0xeb00-0xeb03]
260[ 0.472713] pci 0000:00:1f.2: reg 0x20: [io 0xec00-0xec0f]
261[ 0.472744] pci 0000:00:1f.2: PME# supported from D3hot
262[ 0.472824] pci 0000:00:1f.3: [8086:27da] type 00 class 0x0c0500
263[ 0.472873] pci 0000:00:1f.3: reg 0x20: [io 0x0500-0x051f]
264[ 0.473021] pci 0000:01:00.0: [10de:0613] type 00 class 0x030000
265[ 0.473044] pci 0000:01:00.0: reg 0x10: [mem 0xf6000000-0xf6ffffff]
266[ 0.473057] pci 0000:01:00.0: reg 0x14: [mem 0xe0000000-0xefffffff 64bit pref]
267[ 0.473069] pci 0000:01:00.0: reg 0x1c: [mem 0xf4000000-0xf5ffffff 64bit]
268[ 0.473078] pci 0000:01:00.0: reg 0x24: [io 0xc000-0xc07f]
269[ 0.473087] pci 0000:01:00.0: reg 0x30: [mem 0x00000000-0x0001ffff pref]
270[ 0.473094] pci 0000:01:00.0: enabling Extended Tags
271[ 0.473221] pci 0000:00:01.0: PCI bridge to [bus 01]
272[ 0.473223] pci 0000:00:01.0: bridge window [io 0xc000-0xcfff]
273[ 0.473225] pci 0000:00:01.0: bridge window [mem 0xf4000000-0xf7ffffff]
274[ 0.473228] pci 0000:00:01.0: bridge window [mem 0xe0000000-0xefffffff 64bit pref]
275[ 0.473268] pci 0000:00:1c.0: PCI bridge to [bus 02]
276[ 0.473271] pci 0000:00:1c.0: bridge window [io 0xb000-0xbfff]
277[ 0.473333] pci 0000:03:00.0: [10ec:8168] type 00 class 0x020000
278[ 0.473363] pci 0000:03:00.0: reg 0x10: [io 0xd000-0xd0ff]
279[ 0.473391] pci 0000:03:00.0: reg 0x18: [mem 0xf9000000-0xf9000fff 64bit]
280[ 0.473424] pci 0000:03:00.0: reg 0x30: [mem 0x00000000-0x0001ffff pref]
281[ 0.473434] pci 0000:03:00.0: enabling Extended Tags
282[ 0.473517] pci 0000:03:00.0: supports D1 D2
283[ 0.473519] pci 0000:03:00.0: PME# supported from D1 D2 D3hot D3cold
284[ 0.473612] pci 0000:03:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force'
285[ 0.473620] pci 0000:00:1c.3: PCI bridge to [bus 03]
286[ 0.473623] pci 0000:00:1c.3: bridge window [io 0xd000-0xdfff]
287[ 0.473626] pci 0000:00:1c.3: bridge window [mem 0xf8000000-0xf9ffffff]
288[ 0.473645] pci_bus 0000:04: extended config space not accessible
289[ 0.473697] pci 0000:00:1e.0: PCI bridge to [bus 04] (subtractive decode)
290[ 0.473700] pci 0000:00:1e.0: bridge window [io 0xa000-0xafff]
291[ 0.473706] pci 0000:00:1e.0: bridge window [io 0x0000-0x0cf7 window] (subtractive decode)
292[ 0.473708] pci 0000:00:1e.0: bridge window [io 0x0d00-0xffff window] (subtractive decode)
293[ 0.473709] pci 0000:00:1e.0: bridge window [mem 0x000a0000-0x000bffff window] (subtractive decode)
294[ 0.473711] pci 0000:00:1e.0: bridge window [mem 0x000c0000-0x000dffff window] (subtractive decode)
295[ 0.473713] pci 0000:00:1e.0: bridge window [mem 0xdff00000-0xfebfffff window] (subtractive decode)
296[ 0.474247] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 *10 11 12 14 15)
297[ 0.474303] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
298[ 0.474358] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 *5 6 7 9 10 11 12 14 15)
299[ 0.474413] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 10 *11 12 14 15)
300[ 0.474467] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
301[ 0.474521] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
302[ 0.474575] ACPI: PCI Interrupt Link [LNK0] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
303[ 0.474629] ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 5 6 7 9 10 11 *12 14 15)
304[ 0.474828] pci 0000:01:00.0: vgaarb: setting as boot VGA device
305[ 0.474828] pci 0000:01:00.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
306[ 0.474828] pci 0000:01:00.0: vgaarb: bridge control possible
307[ 0.474828] vgaarb: loaded
308[ 0.474828] pps_core: LinuxPPS API ver. 1 registered
309[ 0.474828] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
310[ 0.474828] PTP clock support registered
311[ 0.474828] EDAC MC: Ver: 3.0.0
312[ 0.474828] PCI: Using ACPI for IRQ routing
313[ 0.474828] PCI: pci_cache_line_size set to 64 bytes
314[ 0.474828] e820: reserve RAM buffer [mem 0x0009f800-0x0009ffff]
315[ 0.474828] e820: reserve RAM buffer [mem 0xdfee0000-0xdfffffff]
316[ 0.474828] HPET: 3 timers in total, 0 timers will be used for per-cpu timer
317[ 0.474828] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
318[ 0.474828] hpet0: 3 comparators, 64-bit 14.318180 MHz counter
319[ 0.477950] clocksource: Switched to clocksource tsc-early
320[ 0.492109] VFS: Disk quotas dquot_6.6.0
321[ 0.492132] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
322[ 0.492286] AppArmor: AppArmor Filesystem Enabled
323[ 0.492314] pnp: PnP ACPI init
324[ 0.492512] system 00:00: [io 0x04d0-0x04d1] has been reserved
325[ 0.492514] system 00:00: [io 0x0290-0x029f] has been reserved
326[ 0.492515] system 00:00: [io 0x0800-0x087f] has been reserved
327[ 0.492517] system 00:00: [io 0x0290-0x0294] has been reserved
328[ 0.492519] system 00:00: [io 0x0880-0x088f] has been reserved
329[ 0.492526] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
330[ 0.492602] pnp 00:01: Plug and Play ACPI device, IDs PNP0b00 (active)
331[ 0.492864] pnp 00:02: Plug and Play ACPI device, IDs PNP0501 (active)
332[ 0.493062] pnp 00:03: Plug and Play ACPI device, IDs PNP0400 (active)
333[ 0.493165] pnp 00:04: Plug and Play ACPI device, IDs PNP0303 (active)
334[ 0.493232] system 00:05: [io 0x0400-0x04bf] could not be reserved
335[ 0.493237] system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active)
336[ 0.493436] system 00:06: [mem 0xf0000000-0xf3ffffff] has been reserved
337[ 0.493441] system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active)
338[ 0.493610] system 00:07: [mem 0x000cd200-0x000cffff] has been reserved
339[ 0.493613] system 00:07: [mem 0x000f0000-0x000f7fff] could not be reserved
340[ 0.493614] system 00:07: [mem 0x000f8000-0x000fbfff] could not be reserved
341[ 0.493616] system 00:07: [mem 0x000fc000-0x000fffff] could not be reserved
342[ 0.493618] system 00:07: [mem 0xdfee0000-0xdfefffff] could not be reserved
343[ 0.493620] system 00:07: [mem 0x00000000-0x0009ffff] could not be reserved
344[ 0.493622] system 00:07: [mem 0x00100000-0xdfedffff] could not be reserved
345[ 0.493624] system 00:07: [mem 0xfec00000-0xfec00fff] could not be reserved
346[ 0.493626] system 00:07: [mem 0xfed13000-0xfed1dfff] has been reserved
347[ 0.493627] system 00:07: [mem 0xfed20000-0xfed8ffff] has been reserved
348[ 0.493629] system 00:07: [mem 0xfee00000-0xfee00fff] has been reserved
349[ 0.493631] system 00:07: [mem 0xffb00000-0xffb7ffff] has been reserved
350[ 0.493633] system 00:07: [mem 0xfff00000-0xffffffff] has been reserved
351[ 0.493634] system 00:07: [mem 0x000e0000-0x000effff] has been reserved
352[ 0.493639] system 00:07: Plug and Play ACPI device, IDs PNP0c01 (active)
353[ 0.493645] pnp: PnP ACPI: found 8 devices
354[ 0.501128] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
355[ 0.501147] pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 02] add_size 200000 add_align 100000
356[ 0.501149] pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff] to [bus 02] add_size 200000 add_align 100000
357[ 0.501156] pci 0000:00:1c.3: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 03] add_size 200000 add_align 100000
358[ 0.501172] pci 0000:00:1c.0: BAR 14: assigned [mem 0xfa100000-0xfa2fffff]
359[ 0.501176] pci 0000:00:1c.0: BAR 15: assigned [mem 0xfa300000-0xfa4fffff 64bit pref]
360[ 0.501179] pci 0000:00:1c.3: BAR 15: assigned [mem 0xfa500000-0xfa6fffff 64bit pref]
361[ 0.501183] pci 0000:01:00.0: BAR 6: assigned [mem 0xf7000000-0xf701ffff pref]
362[ 0.501185] pci 0000:00:01.0: PCI bridge to [bus 01]
363[ 0.501188] pci 0000:00:01.0: bridge window [io 0xc000-0xcfff]
364[ 0.501191] pci 0000:00:01.0: bridge window [mem 0xf4000000-0xf7ffffff]
365[ 0.501193] pci 0000:00:01.0: bridge window [mem 0xe0000000-0xefffffff 64bit pref]
366[ 0.501196] pci 0000:00:1c.0: PCI bridge to [bus 02]
367[ 0.501198] pci 0000:00:1c.0: bridge window [io 0xb000-0xbfff]
368[ 0.501202] pci 0000:00:1c.0: bridge window [mem 0xfa100000-0xfa2fffff]
369[ 0.501205] pci 0000:00:1c.0: bridge window [mem 0xfa300000-0xfa4fffff 64bit pref]
370[ 0.501210] pci 0000:03:00.0: BAR 6: assigned [mem 0xf8000000-0xf801ffff pref]
371[ 0.501212] pci 0000:00:1c.3: PCI bridge to [bus 03]
372[ 0.501214] pci 0000:00:1c.3: bridge window [io 0xd000-0xdfff]
373[ 0.501218] pci 0000:00:1c.3: bridge window [mem 0xf8000000-0xf9ffffff]
374[ 0.501220] pci 0000:00:1c.3: bridge window [mem 0xfa500000-0xfa6fffff 64bit pref]
375[ 0.501226] pci 0000:00:1e.0: PCI bridge to [bus 04]
376[ 0.501228] pci 0000:00:1e.0: bridge window [io 0xa000-0xafff]
377[ 0.501237] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window]
378[ 0.501239] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window]
379[ 0.501240] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
380[ 0.501242] pci_bus 0000:00: resource 7 [mem 0x000c0000-0x000dffff window]
381[ 0.501243] pci_bus 0000:00: resource 8 [mem 0xdff00000-0xfebfffff window]
382[ 0.501245] pci_bus 0000:01: resource 0 [io 0xc000-0xcfff]
383[ 0.501246] pci_bus 0000:01: resource 1 [mem 0xf4000000-0xf7ffffff]
384[ 0.501248] pci_bus 0000:01: resource 2 [mem 0xe0000000-0xefffffff 64bit pref]
385[ 0.501250] pci_bus 0000:02: resource 0 [io 0xb000-0xbfff]
386[ 0.501251] pci_bus 0000:02: resource 1 [mem 0xfa100000-0xfa2fffff]
387[ 0.501252] pci_bus 0000:02: resource 2 [mem 0xfa300000-0xfa4fffff 64bit pref]
388[ 0.501254] pci_bus 0000:03: resource 0 [io 0xd000-0xdfff]
389[ 0.501255] pci_bus 0000:03: resource 1 [mem 0xf8000000-0xf9ffffff]
390[ 0.501257] pci_bus 0000:03: resource 2 [mem 0xfa500000-0xfa6fffff 64bit pref]
391[ 0.501258] pci_bus 0000:04: resource 0 [io 0xa000-0xafff]
392[ 0.501260] pci_bus 0000:04: resource 4 [io 0x0000-0x0cf7 window]
393[ 0.501261] pci_bus 0000:04: resource 5 [io 0x0d00-0xffff window]
394[ 0.501263] pci_bus 0000:04: resource 6 [mem 0x000a0000-0x000bffff window]
395[ 0.501264] pci_bus 0000:04: resource 7 [mem 0x000c0000-0x000dffff window]
396[ 0.501266] pci_bus 0000:04: resource 8 [mem 0xdff00000-0xfebfffff window]
397[ 0.501337] NET: Registered protocol family 2
398[ 0.501529] tcp_listen_portaddr_hash hash table entries: 2048 (order: 3, 32768 bytes)
399[ 0.501557] TCP established hash table entries: 32768 (order: 6, 262144 bytes)
400[ 0.501669] TCP bind hash table entries: 32768 (order: 7, 524288 bytes)
401[ 0.501838] TCP: Hash tables configured (established 32768 bind 32768)
402[ 0.501890] UDP hash table entries: 2048 (order: 4, 65536 bytes)
403[ 0.501916] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
404[ 0.501992] NET: Registered protocol family 1
405[ 0.501998] NET: Registered protocol family 44
406[ 0.502628] pci 0000:01:00.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
407[ 0.502634] PCI: CLS 32 bytes, default 64
408[ 0.502689] Unpacking initramfs...
409[ 1.199466] Freeing initrd memory: 35992K
410[ 1.199553] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
411[ 1.199556] software IO TLB: mapped [mem 0xdbee0000-0xdfee0000] (64MB)
412[ 1.200742] Initialise system trusted keyrings
413[ 1.200755] Key type blacklist registered
414[ 1.200852] workingset: timestamp_bits=40 max_order=20 bucket_order=0
415[ 1.202851] zbud: loaded
416[ 1.449561] Key type asymmetric registered
417[ 1.449564] Asymmetric key parser 'x509' registered
418[ 1.449589] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 247)
419[ 1.449644] io scheduler noop registered
420[ 1.449645] io scheduler deadline registered
421[ 1.449700] io scheduler cfq registered (default)
422[ 1.449701] io scheduler mq-deadline registered
423[ 1.450234] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
424[ 1.450249] intel_idle: does not run on family 6 model 15
425[ 1.450657] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
426[ 1.471069] 00:02: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
427[ 1.471660] Linux agpgart interface v0.103
428[ 1.471784] AMD IOMMUv2 driver by Joerg Roedel <jroedel@suse.de>
429[ 1.471784] AMD IOMMUv2 functionality not available on this system
430[ 1.472155] i8042: PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1
431[ 1.472156] i8042: PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp
432[ 1.472301] serio: i8042 KBD port at 0x60,0x64 irq 1
433[ 1.472430] mousedev: PS/2 mouse device common for all mice
434[ 1.472490] rtc_cmos 00:01: RTC can wake from S4
435[ 1.472645] rtc_cmos 00:01: registered as rtc0
436[ 1.472682] rtc_cmos 00:01: alarms up to one month, 242 bytes nvram, hpet irqs
437[ 1.472738] ledtrig-cpu: registered to indicate activity on CPUs
438[ 1.473217] NET: Registered protocol family 10
439[ 1.481728] Segment Routing with IPv6
440[ 1.481753] mip6: Mobile IPv6
441[ 1.481755] NET: Registered protocol family 17
442[ 1.481809] mpls_gso: MPLS GSO support
443[ 1.482048] mce: Using 6 MCE banks
444[ 1.482088] microcode: sig=0x6fb, pf=0x10, revision=0xb6
445[ 1.482187] microcode: Microcode Update Driver: v2.2.
446[ 1.482215] sched_clock: Marking stable (1478288344, 3884529)->(1487871301, -5698428)
447[ 1.482480] registered taskstats version 1
448[ 1.482481] Loading compiled-in X.509 certificates
449[ 1.491824] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
450[ 1.539305] Loaded X.509 cert 'Debian Secure Boot CA: 6ccece7e4c6c0d1f6149f3dd27dfcc5cbb419ea1'
451[ 1.539322] Loaded X.509 cert 'Debian Secure Boot Signer: 00a7468def'
452[ 1.539342] zswap: loaded using pool lzo/zbud
453[ 1.539463] AppArmor: AppArmor sha1 policy hashing enabled
454[ 1.539866] rtc_cmos 00:01: setting system clock to 2020-03-26 17:21:26 UTC (1585243286)
455[ 1.542083] Freeing unused kernel image memory: 1592K
456[ 1.564948] Write protecting the kernel read-only data: 16384k
457[ 1.565917] Freeing unused kernel image memory: 2028K
458[ 1.566236] Freeing unused kernel image memory: 776K
459[ 1.579186] x86/mm: Checked W+X mappings: passed, no W+X pages found.
460[ 1.579190] Run /init as init process
461[ 1.643842] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input1
462[ 1.643856] ACPI: Power Button [PWRB]
463[ 1.643954] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
464[ 1.643973] ACPI: Power Button [PWRF]
465[ 1.664628] ACPI: bus type USB registered
466[ 1.664656] usbcore: registered new interface driver usbfs
467[ 1.664666] usbcore: registered new interface driver hub
468[ 1.664702] usbcore: registered new device driver usb
469[ 1.666009] ACPI Warning: SystemIO range 0x0000000000000428-0x000000000000042F conflicts with OpRegion 0x000000000000042C-0x000000000000042D (\GP2C) (20180810/utaddress-213)
470[ 1.666014] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
471[ 1.666041] lpc_ich: Resource conflict(s) found affecting gpio_ich
472[ 1.668791] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
473[ 1.669628] ehci-pci: EHCI PCI platform driver
474[ 1.669781] ehci-pci 0000:00:1d.7: EHCI Host Controller
475[ 1.669788] ehci-pci 0000:00:1d.7: new USB bus registered, assigned bus number 1
476[ 1.670842] r8169 0000:03:00.0: can't disable ASPM; OS doesn't have ASPM control
477[ 1.673717] ehci-pci 0000:00:1d.7: cache line size of 32 is not supported
478[ 1.673734] ehci-pci 0000:00:1d.7: irq 23, io mem 0xfa004000
479[ 1.674071] uhci_hcd: USB Universal Host Controller Interface driver
480[ 1.676175] libphy: r8169: probed
481[ 1.676751] r8169 0000:03:00.0 eth0: RTL8168b/8111b, 00:1d:7d:c7:be:43, XID 38000000, IRQ 19
482[ 1.676754] r8169 0000:03:00.0 eth0: jumbo features [frames: 4080 bytes, tx checksumming: ko]
483[ 1.679027] SCSI subsystem initialized
484[ 1.683712] i801_smbus 0000:00:1f.3: SMBus using PCI interrupt
485[ 1.688985] ehci-pci 0000:00:1d.7: USB 2.0 started, EHCI 1.00
486[ 1.689069] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 4.19
487[ 1.689071] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
488[ 1.689072] usb usb1: Product: EHCI Host Controller
489[ 1.689074] usb usb1: Manufacturer: Linux 4.19.0-8-amd64 ehci_hcd
490[ 1.689075] usb usb1: SerialNumber: 0000:00:1d.7
491[ 1.689225] hub 1-0:1.0: USB hub found
492[ 1.689233] hub 1-0:1.0: 8 ports detected
493[ 1.691627] uhci_hcd 0000:00:1d.0: UHCI Host Controller
494[ 1.691640] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
495[ 1.691649] uhci_hcd 0000:00:1d.0: detected 2 ports
496[ 1.691672] uhci_hcd 0000:00:1d.0: irq 23, io base 0x0000e000
497[ 1.691743] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 4.19
498[ 1.691745] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
499[ 1.691747] usb usb2: Product: UHCI Host Controller
500[ 1.691749] usb usb2: Manufacturer: Linux 4.19.0-8-amd64 uhci_hcd
501[ 1.691750] usb usb2: SerialNumber: 0000:00:1d.0
502[ 1.691978] hub 2-0:1.0: USB hub found
503[ 1.691987] hub 2-0:1.0: 2 ports detected
504[ 1.692225] uhci_hcd 0000:00:1d.1: UHCI Host Controller
505[ 1.692232] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
506[ 1.692237] uhci_hcd 0000:00:1d.1: detected 2 ports
507[ 1.692255] uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000e100
508[ 1.692309] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 4.19
509[ 1.692311] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
510[ 1.692313] usb usb3: Product: UHCI Host Controller
511[ 1.692315] usb usb3: Manufacturer: Linux 4.19.0-8-amd64 uhci_hcd
512[ 1.692316] usb usb3: SerialNumber: 0000:00:1d.1
513[ 1.692552] hub 3-0:1.0: USB hub found
514[ 1.692560] hub 3-0:1.0: 2 ports detected
515[ 1.692770] uhci_hcd 0000:00:1d.2: UHCI Host Controller
516[ 1.692775] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
517[ 1.692780] uhci_hcd 0000:00:1d.2: detected 2 ports
518[ 1.692809] uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000e200
519[ 1.692875] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 4.19
520[ 1.692877] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
521[ 1.692879] usb usb4: Product: UHCI Host Controller
522[ 1.692880] usb usb4: Manufacturer: Linux 4.19.0-8-amd64 uhci_hcd
523[ 1.692882] usb usb4: SerialNumber: 0000:00:1d.2
524[ 1.693017] libata version 3.00 loaded.
525[ 1.693052] hub 4-0:1.0: USB hub found
526[ 1.693060] hub 4-0:1.0: 2 ports detected
527[ 1.693235] uhci_hcd 0000:00:1d.3: UHCI Host Controller
528[ 1.693243] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5
529[ 1.693249] uhci_hcd 0000:00:1d.3: detected 2 ports
530[ 1.693273] uhci_hcd 0000:00:1d.3: irq 16, io base 0x0000e300
531[ 1.693326] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 4.19
532[ 1.693328] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
533[ 1.693329] usb usb5: Product: UHCI Host Controller
534[ 1.693331] usb usb5: Manufacturer: Linux 4.19.0-8-amd64 uhci_hcd
535[ 1.693332] usb usb5: SerialNumber: 0000:00:1d.3
536[ 1.693448] hub 5-0:1.0: USB hub found
537[ 1.693455] hub 5-0:1.0: 2 ports detected
538[ 1.695033] ata_piix 0000:00:1f.1: version 2.13
539[ 1.695984] scsi host0: ata_piix
540[ 1.696153] scsi host1: ata_piix
541[ 1.696203] ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xf000 irq 14
542[ 1.696205] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xf008 irq 15
543[ 1.696285] ata_piix 0000:00:1f.2: MAP [ P0 P2 P1 P3 ]
544[ 1.697142] scsi host2: ata_piix
545[ 1.697254] scsi host3: ata_piix
546[ 1.697307] ata3: SATA max UDMA/133 cmd 0xe800 ctl 0xe900 bmdma 0xec00 irq 19
547[ 1.697308] ata4: SATA max UDMA/133 cmd 0xea00 ctl 0xeb00 bmdma 0xec08 irq 19
548[ 1.700180] r8169 0000:03:00.0 enp3s0: renamed from eth0
549[ 1.868412] ata1.00: HPA detected: current 390719855, native 390721968
550[ 1.868417] ata1.00: ATA-7: SAMSUNG SP2014N, VC100-33, max UDMA/100
551[ 1.868419] ata1.00: 390719855 sectors, multi 16: LBA48
552[ 1.871181] scsi 0:0:0:0: Direct-Access ATA SAMSUNG SP2014N 0-33 PQ: 0 ANSI: 5
553[ 1.886432] ata4.00: ATA-8: ST3160310CS, SC14, max UDMA/133
554[ 1.886435] ata4.00: 312581808 sectors, multi 16: LBA48 NCQ (depth 0/32)
555[ 1.895089] ata3.00: HPA detected: current 312579695, native 312581808
556[ 1.895093] ata3.00: ATA-8: ST3160310CS, SC14, max UDMA/133
557[ 1.895095] ata3.00: 312579695 sectors, multi 16: LBA48 NCQ (depth 0/32)
558[ 1.946371] scsi 2:0:0:0: Direct-Access ATA ST3160310CS SC14 PQ: 0 ANSI: 5
559[ 1.946595] scsi 3:0:0:0: Direct-Access ATA ST3160310CS SC14 PQ: 0 ANSI: 5
560[ 1.950396] sd 0:0:0:0: [sda] 390719855 512-byte logical blocks: (200 GB/186 GiB)
561[ 1.950405] sd 0:0:0:0: [sda] Write Protect is off
562[ 1.950407] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
563[ 1.950435] sd 2:0:0:0: [sdb] 312579695 512-byte logical blocks: (160 GB/149 GiB)
564[ 1.950441] sd 2:0:0:0: [sdb] Write Protect is off
565[ 1.950442] sd 2:0:0:0: [sdb] Mode Sense: 00 3a 00 00
566[ 1.950452] sd 2:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
567[ 1.950502] sd 3:0:0:0: [sdc] 312581808 512-byte logical blocks: (160 GB/149 GiB)
568[ 1.950508] sd 3:0:0:0: [sdc] Write Protect is off
569[ 1.950510] sd 3:0:0:0: [sdc] Mode Sense: 00 3a 00 00
570[ 1.950521] sd 3:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
571[ 1.950716] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
572[ 1.980425] sdc: sdc1 sdc2 sdc3 sdc4
573[ 1.980834] sd 3:0:0:0: [sdc] Attached SCSI disk
574[ 1.994491] sdb: sdb1 sdb2 sdb3
575[ 1.994853] sd 2:0:0:0: [sdb] Attached SCSI disk
576[ 2.019382] sda: sda1 sda2 < sda5 sda6 sda7 sda8 >
577[ 2.019821] sd 0:0:0:0: [sda] Attached SCSI disk
578[ 2.232954] usb 4-1: new full-speed USB device number 2 using uhci_hcd
579[ 2.232958] tsc: Refined TSC clocksource calibration: 2399.999 MHz
580[ 2.232968] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x2298364cab5, max_idle_ns: 440795214892 ns
581[ 2.232992] clocksource: Switched to clocksource tsc
582[ 2.365067] random: fast init done
583[ 2.424008] usb 4-1: New USB device found, idVendor=09da, idProduct=9090, bcdDevice= 1.91
584[ 2.424012] usb 4-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
585[ 2.424014] usb 4-1: Product: USB Device
586[ 2.424016] usb 4-1: Manufacturer: A4TECH
587[ 2.433040] hidraw: raw HID events driver (C) Jiri Kosina
588[ 2.441304] usbcore: registered new interface driver usbhid
589[ 2.441306] usbhid: USB HID core driver
590[ 2.443471] input: A4TECH USB Device Keyboard as /devices/pci0000:00/0000:00:1d.2/usb4/4-1/4-1:1.0/0003:09DA:9090.0001/input/input3
591[ 2.501187] input: A4TECH USB Device System Control as /devices/pci0000:00/0000:00:1d.2/usb4/4-1/4-1:1.0/0003:09DA:9090.0001/input/input4
592[ 2.501236] input: A4TECH USB Device Consumer Control as /devices/pci0000:00/0000:00:1d.2/usb4/4-1/4-1:1.0/0003:09DA:9090.0001/input/input5
593[ 2.501269] input: A4TECH USB Device as /devices/pci0000:00/0000:00:1d.2/usb4/4-1/4-1:1.0/0003:09DA:9090.0001/input/input6
594[ 2.501361] hid-generic 0003:09DA:9090.0001: input,hiddev0,hidraw0: USB HID v1.11 Keyboard [A4TECH USB Device] on usb-0000:00:1d.2-1/input0
595[ 2.501648] input: A4TECH USB Device as /devices/pci0000:00/0000:00:1d.2/usb4/4-1/4-1:1.1/0003:09DA:9090.0002/input/input7
596[ 2.501720] hid-generic 0003:09DA:9090.0002: input,hidraw1: USB HID v1.11 Mouse [A4TECH USB Device] on usb-0000:00:1d.2-1/input1
597[ 2.928954] usb 1-6: new high-speed USB device number 3 using ehci-pci
598[ 3.089523] usb 1-6: New USB device found, idVendor=214b, idProduct=7000, bcdDevice= 1.00
599[ 3.089526] usb 1-6: New USB device strings: Mfr=0, Product=1, SerialNumber=0
600[ 3.089528] usb 1-6: Product: USB2.0 HUB
601[ 3.089828] hub 1-6:1.0: USB hub found
602[ 3.089897] hub 1-6:1.0: 4 ports detected
603[ 3.152950] raid6: sse2x1 gen() 3769 MB/s
604[ 3.220934] raid6: sse2x1 xor() 4084 MB/s
605[ 3.288933] raid6: sse2x2 gen() 4487 MB/s
606[ 3.356932] raid6: sse2x2 xor() 4992 MB/s
607[ 3.424936] raid6: sse2x4 gen() 7380 MB/s
608[ 3.492940] raid6: sse2x4 xor() 5391 MB/s
609[ 3.492941] raid6: using algorithm sse2x4 gen() 7380 MB/s
610[ 3.492942] raid6: .... xor() 5391 MB/s, rmw enabled
611[ 3.492943] raid6: using ssse3x2 recovery algorithm
612[ 3.502392] xor: measuring software checksum speed
613[ 3.540937] prefetch64-sse: 9722.000 MB/sec
614[ 3.580936] generic_sse: 8598.000 MB/sec
615[ 3.580938] xor: using function: prefetch64-sse (9722.000 MB/sec)
616[ 3.682928] Btrfs loaded, crc32c=crc32c-generic
617[ 3.685830] random: crng init done
618[ 5.008020] PM: Image not found (code -22)
619[ 5.188863] cryptd: max_cpu_qlen set to 1000
620[ 5.337317] EXT4-fs (sdb3): mounted filesystem with ordered data mode. Opts: (null)
621[ 6.843480] systemd[1]: RTC configured in localtime, applying delta of 120 minutes to system time.
622[ 7.207563] systemd[1]: Inserted module 'autofs4'
623[ 7.404637] systemd[1]: systemd 241 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN2 +IDN -PCRE2 default-hierarchy=hybrid)
624[ 7.421015] systemd[1]: Detected architecture x86-64.
625[ 7.432949] systemd[1]: Set hostname to <debian>.
626[ 8.526036] systemd[1]: Listening on Syslog Socket.
627[ 8.526962] systemd[1]: Created slice User and Session Slice.
628[ 8.527022] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
629[ 8.527082] systemd[1]: Listening on initctl Compatibility Named Pipe.
630[ 8.527167] systemd[1]: Listening on udev Kernel Socket.
631[ 8.527314] systemd[1]: Listening on Journal Audit Socket.
632[ 8.527338] systemd[1]: Reached target Remote File Systems.
633[ 9.219153] EXT4-fs (sdb3): re-mounted. Opts: errors=remount-ro
634[ 9.748750] systemd-journald[222]: Received request to flush runtime journal from PID 1
635[ 10.203831] nvidia: loading out-of-tree module taints kernel.
636[ 10.203842] nvidia: module license 'NVIDIA' taints kernel.
637[ 10.203843] Disabling lock debugging due to kernel taint
638[ 10.214380] nvidia: module verification failed: signature and/or required key missing - tainting kernel
639[ 10.221616] nvidia 0000:01:00.0: vgaarb: changed VGA decodes: olddecodes=io+mem,decodes=none:owns=io+mem
640[ 10.221967] [drm] Initialized nvidia-drm 0.0.0 20150116 for 0000:01:00.0 on minor 0
641[ 10.221980] NVRM: loading NVIDIA UNIX x86_64 Kernel Module 340.108 Wed Dec 11 11:06:58 PST 2019
642[ 11.696212] audit: type=1400 audit(1585243256.616:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="libreoffice-senddoc" pid=259 comm="apparmor_parser"
643[ 11.696414] audit: type=1400 audit(1585243256.616:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="libreoffice-xpdfimport" pid=258 comm="apparmor_parser"
644[ 11.697571] audit: type=1400 audit(1585243256.620:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="nvidia_modprobe" pid=260 comm="apparmor_parser"
645[ 11.697576] audit: type=1400 audit(1585243256.620:5): apparmor="STATUS" operation="profile_load" profile="unconfined" name="nvidia_modprobe//kmod" pid=260 comm="apparmor_parser"
646[ 11.728581] audit: type=1400 audit(1585243256.648:6): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/man" pid=257 comm="apparmor_parser"
647[ 11.728587] audit: type=1400 audit(1585243256.648:7): apparmor="STATUS" operation="profile_load" profile="unconfined" name="man_filter" pid=257 comm="apparmor_parser"
648[ 11.728590] audit: type=1400 audit(1585243256.648:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="man_groff" pid=257 comm="apparmor_parser"
649[ 11.732188] audit: type=1400 audit(1585243256.652:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="libreoffice-oopslash" pid=261 comm="apparmor_parser"
650[ 11.734250] audit: type=1400 audit(1585243256.656:10): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/haveged" pid=264 comm="apparmor_parser"
651[ 11.746619] audit: type=1400 audit(1585243256.668:11): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/x86_64-linux-gnu/lightdm/lightdm-guest-session" pid=263 comm="apparmor_parser"
652[ 12.320407] input: PC Speaker as /devices/platform/pcspkr/input/input8
653[ 12.793966] parport_pc 00:03: reported by Plug and Play ACPI
654[ 12.794035] parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE]
655[ 12.948232] ppdev: user-space parallel port driver
656[ 13.332334] sd 0:0:0:0: Attached scsi generic sg0 type 0
657[ 13.332378] sd 2:0:0:0: Attached scsi generic sg1 type 0
658[ 13.332419] sd 3:0:0:0: Attached scsi generic sg2 type 0
659[ 13.354252] coretemp coretemp.0: Using relative temperature scale!
660[ 13.354492] coretemp coretemp.0: Using relative temperature scale!
661[ 13.354782] coretemp coretemp.0: Using relative temperature scale!
662[ 13.354811] coretemp coretemp.0: Using relative temperature scale!
663[ 13.430445] intel_powerclamp: No package C-state available
664[ 13.485395] intel_powerclamp: No package C-state available
665[ 13.517508] intel_powerclamp: No package C-state available
666[ 13.523287] intel_rng: FWH not detected
667[ 13.573296] intel_powerclamp: No package C-state available
668[ 13.768596] leds_ss4200: no LED devices found
669[ 13.860839] iTCO_vendor_support: vendor-support=0
670[ 14.150328] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11
671[ 14.150398] iTCO_wdt: Found a ICH7 or ICH7R TCO device (Version=2, TCOBASE=0x0460)
672[ 14.150533] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
673[ 14.800204] snd_hda_codec_realtek hdaudioC0D2: autoconfig for ALC888: line_outs=4 (0x14/0x15/0x16/0x17/0x0) type:line
674[ 14.800207] snd_hda_codec_realtek hdaudioC0D2: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
675[ 14.800210] snd_hda_codec_realtek hdaudioC0D2: hp_outs=1 (0x1b/0x0/0x0/0x0/0x0)
676[ 14.800211] snd_hda_codec_realtek hdaudioC0D2: mono: mono_out=0x0
677[ 14.800213] snd_hda_codec_realtek hdaudioC0D2: dig-out=0x1e/0x0
678[ 14.800214] snd_hda_codec_realtek hdaudioC0D2: inputs:
679[ 14.800216] snd_hda_codec_realtek hdaudioC0D2: Rear Mic=0x18
680[ 14.800218] snd_hda_codec_realtek hdaudioC0D2: Front Mic=0x19
681[ 14.800220] snd_hda_codec_realtek hdaudioC0D2: Line=0x1a
682[ 14.800222] snd_hda_codec_realtek hdaudioC0D2: CD=0x1c
683[ 14.800223] snd_hda_codec_realtek hdaudioC0D2: dig-in=0x1f
684[ 14.816857] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/sound/card0/input9
685[ 14.820533] input: HDA Intel Rear Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10
686[ 14.820707] input: HDA Intel Front Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input11
687[ 14.820794] input: HDA Intel Line as /devices/pci0000:00/0000:00:1b.0/sound/card0/input12
688[ 14.820873] input: HDA Intel Line Out Front as /devices/pci0000:00/0000:00:1b.0/sound/card0/input13
689[ 14.821912] input: HDA Intel Line Out Surround as /devices/pci0000:00/0000:00:1b.0/sound/card0/input14
690[ 14.822454] input: HDA Intel Line Out CLFE as /devices/pci0000:00/0000:00:1b.0/sound/card0/input15
691[ 14.822761] input: HDA Intel Line Out Side as /devices/pci0000:00/0000:00:1b.0/sound/card0/input16
692[ 14.823005] Adding 4194300k swap on /dev/sdb2. Priority:-2 extents:1 across:4194300k FS
693[ 14.823834] snd_hda_intel 0000:00:1b.0: device 1458:a002 is on the power_save blacklist, forcing power_save to 0
694[ 14.825049] Adding 4735996k swap on /dev/sdc2. Priority:-3 extents:1 across:4735996k FS
695[ 17.325134] resource sanity check: requesting [mem 0x000c0000-0x000fffff], which spans more than PCI Bus 0000:00 [mem 0x000c0000-0x000dffff window]
696[ 17.325305] caller _nv000788rm+0xe4/0x1c0 [nvidia] mapping multiple BARs
697[ 26.320776] IPv6: ADDRCONF(NETDEV_UP): enp3s0: link is not ready
698[ 26.321371] RTL8211B Gigabit Ethernet r8169-300:00: attached PHY driver [RTL8211B Gigabit Ethernet] (mii_bus:phy_addr=r8169-300:00, irq=IGNORE)
699[ 26.426081] IPv6: ADDRCONF(NETDEV_UP): enp3s0: link is not ready
700[ 26.426789] r8169 0000:03:00.0 enp3s0: Link is Down
701[ 27.981685] r8169 0000:03:00.0 enp3s0: Link is Up - 100Mbps/Full - flow control rx/tx
702[ 27.981699] IPv6: ADDRCONF(NETDEV_CHANGE): enp3s0: link becomes ready
703[ 28.177524] resource sanity check: requesting [mem 0x000c0000-0x000fffff], which spans more than PCI Bus 0000:00 [mem 0x000c0000-0x000dffff window]
704[ 28.177685] caller _nv000788rm+0xe4/0x1c0 [nvidia] mapping multiple BARs
705[ 421.159789] INFO: NMI handler (perf_event_nmi_handler) took too long to run: 1.138 msecs
706root@debian:/var/log/lightdm#