· 8 years ago · Nov 30, 2017, 10:12 PM
1<6>[ 0.000000] Booting Linux on physical CPU 0x100
2<6>[ 0.000000] Initializing cgroup subsys cpu
3<6>[ 0.000000] Initializing cgroup subsys cpuacct
4<5>[ 0.000000] Linux version 3.18.71-perf-gc7ee433-dirty (messi2050@messi2050) (gcc version 4.8 (GCC) ) #1 SMP PREEMPT Thu Nov 30 22:29:16 EET 2017
5<6>[ 0.000000] CPU: ARMv7 Processor [410fd034] revision 4 (ARMv7), cr=10c0383d
6<6>[ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
7<6>[ 0.000000] Machine model: Qualcomm Technologies, Inc. MSM8937-PMI8950 MTP
8<6>[ 0.000000] Reserved memory: reserved region for node 'other_ext_region@0': base 0x85500000, size 19 MiB
9<6>[ 0.000000] Reserved memory: reserved region for node 'modem_region@0': base 0x86800000, size 82 MiB
10<6>[ 0.000000] Reserved memory: reserved region for node 'adsp_fw_region@0': base 0x8b800000, size 17 MiB
11<6>[ 0.000000] Reserved memory: reserved region for node 'wcnss_fw_region@0': base 0x8c900000, size 7 MiB
12<6>[ 0.000000] Reserved memory: reserved region for node 'splash_region@83000000': base 0x90000000, size 20 MiB
13<6>[ 0.000000] Reserved memory: reserved region for node 'lk_pool@8f600000': base 0x8f600000, size 10 MiB
14<6>[ 0.000000] Reserved memory: reserved region for node 'lk_camera@A400102f': base 0xa400102f, size 416 MiB
15<6>[ 0.000000] Reserved memory: reserved region for node 'ramoops_region@AFF00000': base 0xaff00000, size 1 MiB
16<6>[ 0.000000] Reserved memory: reserved region for node 'crash_fb_mem@AFB00000': base 0xafb00000, size 4 MiB
17<4>[ 0.000000] ------------[ cut here ]------------
18<4>[ 0.000000] WARNING: CPU: 0 PID: 0 at ../../../../../../kernel/lge/msm8937/drivers/of/of_reserved_mem.c:243 fdt_init_reserved_mem+0xbc/0x434()
19<4>[ 0.000000] Reserved mem: OVERLAP DETECTED!
20<4>[ 0.000000] Modules linked in:
21<4>[ 0.000000] CPU: 0 PID: 0 Comm: swapper Not tainted 3.18.71-perf-gc7ee433-dirty #1
22<4>[ 0.000000] [<c010df04>] (unwind_backtrace) from [<c010a95c>] (show_stack+0x10/0x14)
23<4>[ 0.000000] [<c010a95c>] (show_stack) from [<c0c374c4>] (dump_stack+0x84/0xa4)
24<4>[ 0.000000] [<c0c374c4>] (dump_stack) from [<c01256fc>] (warn_slowpath_common+0x64/0x88)
25<4>[ 0.000000] [<c01256fc>] (warn_slowpath_common) from [<c012574c>] (warn_slowpath_fmt+0x2c/0x3c)
26<4>[ 0.000000] [<c012574c>] (warn_slowpath_fmt) from [<c1342798>] (fdt_init_reserved_mem+0xbc/0x434)
27<4>[ 0.000000] [<c1342798>] (fdt_init_reserved_mem) from [<c1341b0c>] (early_init_fdt_scan_reserved_mem+0x7c/0x8c)
28<4>[ 0.000000] [<c1341b0c>] (early_init_fdt_scan_reserved_mem) from [<c13062f0>] (arm_memblock_init+0x124/0x180)
29<4>[ 0.000000] [<c13062f0>] (arm_memblock_init) from [<c1304500>] (setup_arch+0x4d0/0x8cc)
30<4>[ 0.000000] [<c1304500>] (setup_arch) from [<c130093c>] (start_kernel+0x8c/0x428)
31<4>[ 0.000000] [<c130093c>] (start_kernel) from [<8000807c>] (0x8000807c)
32<4>[ 0.000000] ---[ end trace cb88537fdc8fa200 ]---
33<3>[ 0.000000] modem_region@0 (0x86800000--0x8ba00000) overlaps with adsp_fw_region@0 (0x8b800000--0x8c900000)
34<4>[ 0.000000] ------------[ cut here ]------------
35<4>[ 0.000000] WARNING: CPU: 0 PID: 0 at ../../../../../../kernel/lge/msm8937/drivers/of/of_reserved_mem.c:243 fdt_init_reserved_mem+0xbc/0x434()
36<4>[ 0.000000] Reserved mem: OVERLAP DETECTED!
37<4>[ 0.000000] Modules linked in:
38<4>[ 0.000000] CPU: 0 PID: 0 Comm: swapper Tainted: G W 3.18.71-perf-gc7ee433-dirty #1
39<4>[ 0.000000] [<c010df04>] (unwind_backtrace) from [<c010a95c>] (show_stack+0x10/0x14)
40<4>[ 0.000000] [<c010a95c>] (show_stack) from [<c0c374c4>] (dump_stack+0x84/0xa4)
41<4>[ 0.000000] [<c0c374c4>] (dump_stack) from [<c01256fc>] (warn_slowpath_common+0x64/0x88)
42<4>[ 0.000000] [<c01256fc>] (warn_slowpath_common) from [<c012574c>] (warn_slowpath_fmt+0x2c/0x3c)
43<4>[ 0.000000] [<c012574c>] (warn_slowpath_fmt) from [<c1342798>] (fdt_init_reserved_mem+0xbc/0x434)
44<4>[ 0.000000] [<c1342798>] (fdt_init_reserved_mem) from [<c1341b0c>] (early_init_fdt_scan_reserved_mem+0x7c/0x8c)
45<4>[ 0.000000] [<c1341b0c>] (early_init_fdt_scan_reserved_mem) from [<c13062f0>] (arm_memblock_init+0x124/0x180)
46<4>[ 0.000000] [<c13062f0>] (arm_memblock_init) from [<c1304500>] (setup_arch+0x4d0/0x8cc)
47<4>[ 0.000000] [<c1304500>] (setup_arch) from [<c130093c>] (start_kernel+0x8c/0x428)
48<4>[ 0.000000] [<c130093c>] (start_kernel) from [<8000807c>] (0x8000807c)
49<4>[ 0.000000] ---[ end trace cb88537fdc8fa201 ]---
50<3>[ 0.000000] lk_camera@A400102f (0xa400102f--0xbe00102f) overlaps with crash_fb_mem@AFB00000 (0xafb00000--0xaff00000)
51<6>[ 0.000000] Removed memory: created DMA memory pool at 0x85500000, size 19 MiB
52<6>[ 0.000000] Reserved memory: initialized node other_ext_region@0, compatible id removed-dma-pool
53<6>[ 0.000000] Removed memory: created DMA memory pool at 0x86800000, size 82 MiB
54<6>[ 0.000000] Reserved memory: initialized node modem_region@0, compatible id removed-dma-pool
55<6>[ 0.000000] Removed memory: created DMA memory pool at 0x8b800000, size 17 MiB
56<6>[ 0.000000] Reserved memory: initialized node adsp_fw_region@0, compatible id removed-dma-pool
57<6>[ 0.000000] Removed memory: created DMA memory pool at 0x8c900000, size 7 MiB
58<6>[ 0.000000] Reserved memory: initialized node wcnss_fw_region@0, compatible id removed-dma-pool
59<6>[ 0.000000] Reserved memory: allocated memory for 'venus_region@0' node: base 0x8e400000, size 16 MiB
60<6>[ 0.000000] Reserved memory: created CMA memory pool at 0x8e400000, size 16 MiB
61<6>[ 0.000000] Reserved memory: initialized node venus_region@0, compatible id shared-dma-pool
62<6>[ 0.000000] Reserved memory: allocated memory for 'qseecom_region@0' node: base 0xfec00000, size 16 MiB
63<6>[ 0.000000] Reserved memory: created CMA memory pool at 0xfec00000, size 16 MiB
64<6>[ 0.000000] Reserved memory: initialized node qseecom_region@0, compatible id shared-dma-pool
65<6>[ 0.000000] Reserved memory: allocated memory for 'adsp_region@0' node: base 0xfe800000, size 4 MiB
66<6>[ 0.000000] Reserved memory: created CMA memory pool at 0xfe800000, size 4 MiB
67<6>[ 0.000000] Reserved memory: initialized node adsp_region@0, compatible id shared-dma-pool
68<6>[ 0.000000] Removed memory: created DMA memory pool at 0xaff00000, size 1 MiB
69<6>[ 0.000000] Reserved memory: initialized node ramoops_region@AFF00000, compatible id removed-dma-pool
70<6>[ 0.000000] cma: Reserved 16 MiB at 0xfd800000
71<6>[ 0.000000] Memory policy: Data cache writealloc
72<7>[ 0.000000] On node 0 totalpages: 513023
73<7>[ 0.000000] free_area_init_node: node 0, pgdat c1507900, node_mem_map e2fc9000
74<7>[ 0.000000] Normal zone: 1520 pages used for memmap
75<7>[ 0.000000] Normal zone: 0 pages reserved
76<7>[ 0.000000] Normal zone: 183552 pages, LIFO batch:31
77<7>[ 0.000000] HighMem zone: 2576 pages used for memmap
78<7>[ 0.000000] HighMem zone: 329471 pages, LIFO batch:31
79<6>[ 0.000000] psci: probing for conduit method from DT.
80<6>[ 0.000000] psci: PSCIv1.0 detected in firmware.
81<6>[ 0.000000] psci: Using standard PSCI v0.2 function IDs
82<4>[ 0.000000] PERCPU: max_distance=0xb000 too large for vmalloc space 0x0
83<6>[ 0.000000] PERCPU: Embedded 11 pages/cpu @e2ec8000 s14784 r8192 d22080 u45056
84<7>[ 0.000000] pcpu-alloc: s14784 r8192 d22080 u45056 alloc=11*4096
85<7>[ 0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 [0] 4 [0] 5 [0] 6 [0] 7
86<4>[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 511503
87<5>[ 0.000000] Kernel command line: sched_enable_hmp=1 console=ttyHSL0,115200,n8 androidboot.console=ttyHSL0 user_debug=30 msm_rtb.filter=0x237 ehci-hcd.park=3 androidboot.bootdevice=7824900.sdhci lpm_levels.sleep_disabled=1 androidboot.hardware=ph2n androidboot.selinux=permissive lge.uart=disable lge.rev=rev_10 model.name=LGMS550 lge.bootreason=0xde1f376c kswitch lge.bootreasoncode=0xde1f376c bootcable.type=NO_INIT lge.battid=SW3800_VC1 lge.bootWithLcd=connect gpt androidboot.ddr_size=2147483648 androidboot.ddr_info=0x0 boot_cpus=0-7 lge.panel_type=lgd_incell_db7400_hd_video lge.crash_handler=off lge.hreset=off androidboot.bl_unlock_complete=true androidboot.dlcomplete=0 androidboot.verifiedbootstate=orange androidboot.veritymode=enforcing androidboot.rpmb_state=1 androidboot.recovery=true emmc-vdd-always-on=1 androidboot.emmc=true androidboot.serialno=LGMS55054ba16c0 gpt lge.signed_image=true androidboot.baseband=msm mdss_mdp.panel=1:dsi:0:qcom,mdss_dsi_lgd_incell_db7400_hd_video:1:none:<6>[ 0.000000] BOARD: LGE rev_10
88<6>[ 0.000000] LGE BOOT REASON: Couldn't get bootreason - -34
89<6>[ 0.000000] lge_set_panel_type: panel type = 3
90<6>[ 0.000000] [Touch] LGE RECOVERY BOOT: 1
91<6>[ 0.000000] vdd_always_on=1
92<6>[ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
93<6>[ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
94<6>[ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
95<4>[ 0.000000] Memory: 1415596K/2052092K available (12288K kernel code, 1108K rwdata, 5724K rodata, 478K init, 1661K bss, 583248K reserved, 53248K cma-reserved, 1044468K highmem)
96<5>[ 0.000000] Virtual kernel memory layout:
97<5>[ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB)
98<5>[ 0.000000] fixmap : 0xffc00000 - 0xfff00000 (3072 kB)
99<5>[ 0.000000] vmalloc : 0xef800000 - 0xff000000 ( 248 MB)
100<5>[ 0.000000] lowmem : 0xcd000000 - 0xef800000 ( 552 MB)
101<5>[ 0.000000] vmalloc : 0xcb800000 - 0xcd000000 ( 24 MB)
102<5>[ 0.000000] lowmem : 0xc6800000 - 0xcb800000 ( 80 MB)
103<5>[ 0.000000] vmalloc : 0xc5500000 - 0xcd000000 ( 123 MB)
104<5>[ 0.000000] lowmem : 0xc0000000 - 0xc5500000 ( 85 MB)
105<5>[ 0.000000] pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB)
106<5>[ 0.000000] modules : 0xbf000000 - 0xbfe00000 ( 14 MB)
107<5>[ 0.000000] .text : 0xc0008000 - 0xc0d00000 (13280 kB)
108<5>[ 0.000000] .init : 0xc1300000 - 0xc13779c0 ( 479 kB)
109<5>[ 0.000000] .data : 0xc1400000 - 0xc151514c (1109 kB)
110<5>[ 0.000000] .bss : 0xc1515210 - 0xc16b4828 (1662 kB)
111<6>[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
112<6>[ 0.000000] HMP scheduling enabled.
113<6>[ 0.000000] Preemptible hierarchical RCU implementation.
114<6>[ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
115<4>[ 0.000000]
116<4>[ 0.000000] **********************************************************
117<4>[ 0.000000] ** NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE **
118<4>[ 0.000000] ** **
119<4>[ 0.000000] ** trace_printk() being used. Allocating extra memory. **
120<4>[ 0.000000] ** **
121<4>[ 0.000000] ** This means that this is a DEBUG kernel and it is **
122<4>[ 0.000000] ** unsafe for produciton use. **
123<4>[ 0.000000] ** **
124<4>[ 0.000000] ** If you see this message and you are not debugging **
125<4>[ 0.000000] ** the kernel, report this immediately to your vendor! **
126<4>[ 0.000000] ** **
127<4>[ 0.000000] ** NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE **
128<4>[ 0.000000] **********************************************************
129<6>[ 0.000000] NR_IRQS:16 nr_irqs:16 16
130<4>[ 0.000000] mpm_init_irq_domain(): Cannot find irq controller for qcom,gpio-parent
131<3>[ 0.000000] MPM 1 irq mapping errored -517
132<6>[ 0.000000] Offload RCU callbacks from all CPUs
133<6>[ 0.000000] Offload RCU callbacks from CPUs: 0-7.
134<6>[ 0.000000] Architected cp15 and mmio timer(s) running at 19.20MHz (virt/virt).
135<6>[ 0.000006] sched_clock: 56 bits at 19MHz, resolution 52ns, wraps every 3579139424256ns
136<6>[ 0.000017] Switching to timer-based delay loop, resolution 52ns
137<6>[ 0.000030] Switched to clocksource arch_sys_counter
138<6>[ 0.000732] Calibrating delay loop (skipped), value calculated using timer frequency.. 38.40 BogoMIPS (lpj=192000)
139<6>[ 0.000744] pid_max: default: 32768 minimum: 301
140<6>[ 0.000816] Security Framework initialized
141<6>[ 0.000829] SELinux: Initializing.
142<7>[ 0.000850] SELinux: Starting in permissive mode
143<6>[ 0.000898] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes)
144<6>[ 0.000908] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes)
145<6>[ 0.001553] Initializing cgroup subsys freezer
146<6>[ 0.001590] CPU: Testing write buffer coherency: ok
147<6>[ 0.002158] Setting up static identity map for 0x80c41608 - 0x80c41660
148<6>[ 0.016290] MSM Memory Dump base table set up
149<6>[ 0.016312] MSM Memory Dump apps data table set up
150<6>[ 0.016371] Configuring XPU violations to be fatal errors
151<6>[ 0.017205] panic-handler: reserved[@0xafb00000+@0x400000)
152<6>[ 0.017631] mem-address=0xaff00000
153<6>[ 0.017637] mem-size=0x80000
154<6>[ 0.019199] cpu_clock_a53_init_little: A53 Power clocks configured
155<4>[ 0.023288] CPU1: Booted secondary processor
156<4>[ 0.032331] CPU2: Booted secondary processor
157<4>[ 0.033773] CPU3: Booted secondary processor
158<4>[ 0.035386] CPU4: Booted secondary processor
159<4>[ 0.036998] CPU5: Booted secondary processor
160<4>[ 0.038580] CPU6: Booted secondary processor
161<4>[ 0.040221] CPU7: Booted secondary processor
162<6>[ 0.040412] Brought up 8 CPUs
163<6>[ 0.040445] SMP: Total of 8 processors activated (307.20 BogoMIPS).
164<6>[ 0.040451] CPU: All CPU(s) started in SVC mode.
165<6>[ 0.048899] VFP support v0.3: implementor 41 architecture 3 part 40 variant 3 rev 4
166<6>[ 0.051703] pinctrl core: initialized pinctrl subsystem
167<6>[ 0.052039] regulator-dummy: no parameters
168<6>[ 0.114098] NET: Registered protocol family 16
169<6>[ 0.119695] DMA: preallocated 256 KiB pool for atomic coherent allocations
170<4>[ 0.120414] msm_pm_tz_boot_init: set warmboot address failed
171<3>[ 0.120490] scm_call failed: func id 0x2000101, ret: -1, syscall returns: 0x0, 0x0, 0x0
172<6>[ 0.150102] cpuidle: using governor ladder
173<6>[ 0.170098] cpuidle: using governor menu
174<6>[ 0.190096] cpuidle: using governor qcom
175<6>[ 0.216042] msm_watchdog b017000.qcom,wdt: wdog absent resource not present
176<6>[ 0.216392] msm_watchdog b017000.qcom,wdt: MSM Watchdog Initialized
177<6>[ 0.219557] platform soc:qcom,adsprpc-mem: assigned reserved memory node adsp_region@0
178<4>[ 0.221774] irq: no irq domain found for /soc/pinctrl@1000000 !
179<3>[ 0.222208] spmi_pmic_arb 200f000.qcom,spmi: PMIC Arb Version-2 0x20010000
180<6>[ 0.229384] platform 4080000.qcom,mss: assigned reserved memory node modem_region@0
181<6>[ 0.229837] platform c200000.qcom,lpass: assigned reserved memory node adsp_fw_region@0
182<6>[ 0.230211] platform a21b000.qcom,pronto: assigned reserved memory node wcnss_fw_region@0
183<6>[ 0.230416] platform 1de0000.qcom,venus: assigned reserved memory node venus_region@0
184<6>[ 0.231272] mem_acc_corner: 0 <--> 0 mV at 0 mV
185<4>[ 0.240578] irq: no irq domain found for /soc/pinctrl@1000000 !
186<6>[ 0.241694] hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers.
187<6>[ 0.241703] hw-breakpoint: maximum watchpoint size is 8 bytes.
188<4>[ 0.243883] __of_mpm_init(): MPM driver mapping exists
189<4>[ 0.244861] msm_rpm_glink_dt_parse: qcom,rpm-glink compatible not matches
190<6>[ 0.244869] msm_rpm_dev_probe: APSS-RPM communication over SMD
191<6>[ 0.244878] smd_open() before smd_init()
192<3>[ 0.246114] msm_mpm_dev_probe(): Cannot get clk resource for XO: -517
193<3>[ 0.249914] smd_channel_probe_now: allocation table not initialized
194<3>[ 0.250080] smd_channel_probe_now: allocation table not initialized
195<3>[ 0.250207] smd_channel_probe_now: allocation table not initialized
196<6>[ 0.254986] pm8937_s5: 1050 <--> 1350 mV at 1225 mV normal idle
197<6>[ 0.255114] spm_regulator_probe: name=pm8937_s5, range=LV, voltage=1225000 uV, mode=AUTO, step rate=1200 uV/us
198<6>[ 0.255642] cpr_efuse_init: apc_corner: efuse_addr = 0x000a4000 (len=0x1000)
199<6>[ 0.255680] cpr_read_fuse_revision: apc_corner: fuse revision = 2
200<6>[ 0.255696] cpr_parse_speed_bin_fuse: apc_corner: [row: 37]: 0x3048e821003d15bb, speed_bits = 0
201<6>[ 0.255797] cpr_adjust_init_voltages: apc_corner: adjusted initial voltage[1]: 1085000 -> 1120000 uV
202<6>[ 0.255811] cpr_adjust_init_voltages: apc_corner: adjusted initial voltage[2]: 1135000 -> 1175000 uV
203<6>[ 0.255824] cpr_adjust_init_voltages: apc_corner: adjusted initial voltage[3]: 1220000 -> 1240000 uV
204<6>[ 0.255836] cpr_pvs_init: apc_corner: pvs voltage: [1120000 1175000 1240000] uV
205<6>[ 0.255845] cpr_pvs_init: apc_corner: ceiling voltage: [1155000 1225000 1350000] uV
206<6>[ 0.255855] cpr_pvs_init: apc_corner: floor voltage: [1050000 1050000 1090000] uV
207<6>[ 0.255989] cpr_init_cpr_parameters: apc_corner: up threshold = 2, down threshold = 4
208<6>[ 0.256015] cpr_init_cpr_parameters: apc_corner: CPR is enabled by default.
209<6>[ 0.256045] cpr_init_cpr_efuse: apc_corner: [row:67] = 0x248dea73d5a51bad
210<6>[ 0.256069] cpr_init_cpr_efuse: apc_corner: Corner[1]: ro_sel = 2, target quot = 890
211<6>[ 0.256080] cpr_init_cpr_efuse: apc_corner: Corner[2]: ro_sel = 2, target quot = 981
212<6>[ 0.256092] cpr_init_cpr_efuse: apc_corner: Corner[3]: ro_sel = 2, target quot = 1134
213<6>[ 0.256121] cpr_adjust_target_quots: apc_corner: Corner[1]: adjusted target quot = 940
214<6>[ 0.256133] cpr_adjust_target_quots: apc_corner: Corner[2]: adjusted target quot = 991
215<6>[ 0.256145] cpr_adjust_target_quots: apc_corner: Corner[3]: adjusted target quot = 1154
216<6>[ 0.256231] cpr_get_corner_quot_adjustment: apc_corner: fuse corner 2 quotient adjustment scaling factor: 0.380
217<6>[ 0.256240] cpr_get_corner_quot_adjustment: apc_corner: fuse corner 3 quotient adjustment scaling factor: 0.530
218<6>[ 0.256253] cpr_get_corner_quot_adjustment: apc_corner: adjusted quotient[1] = 940
219<6>[ 0.256261] cpr_get_corner_quot_adjustment: apc_corner: adjusted quotient[2] = 991
220<6>[ 0.256268] cpr_get_corner_quot_adjustment: apc_corner: adjusted quotient[3] = 1053
221<6>[ 0.256275] cpr_get_corner_quot_adjustment: apc_corner: adjusted quotient[4] = 1073
222<6>[ 0.256283] cpr_get_corner_quot_adjustment: apc_corner: adjusted quotient[5] = 1124
223<6>[ 0.256290] cpr_get_corner_quot_adjustment: apc_corner: adjusted quotient[6] = 1154
224<6>[ 0.256297] cpr_get_corner_quot_adjustment: apc_corner: adjusted quotient[7] = 1154
225<6>[ 0.256442] cpr_config: apc_corner: Timer count: 0x17700 (for 5000 us)
226<6>[ 0.256746] apc_corner: 0 <--> 0 mV
227<6>[ 0.261745] msm-thermal soc:qcom,msm-thermal: probe_therm_reset:Failed reading node=/soc/qcom,msm-thermal, key=qcom,therm-reset-temp err=-22. KTM continues
228<6>[ 0.261839] msm_thermal:vdd_restriction_reg_init Defer regulator vdd-dig probe
229<3>[ 0.261847] msm_thermal:probe_vdd_rstr Err regulator init. err:-517. KTM continues.
230<6>[ 0.261860] msm-thermal soc:qcom,msm-thermal: probe_vdd_rstr:Failed reading node=/soc/qcom,msm-thermal, key=qcom,max-freq-level. err=-517. KTM continues
231<3>[ 0.261869] msm_thermal:msm_thermal_dev_probe Failed reading node=/soc/qcom,msm-thermal, key=qcom,online-hotplug-core. err:-517
232<6>[ 0.262732] sps:sps is ready.
233<6>[ 0.265173] cpu-clock-8939 b011050.qcom,cpu-clock-8939: No PVS version available. Defaulting to 0!
234<6>[ 0.265185] cpu-clock-8939 b011050.qcom,cpu-clock-8939: Speed bin: 0 PVS Version: 0
235<4>[ 0.268025] msm_rpm_glink_dt_parse: qcom,rpm-glink compatible not matches
236<6>[ 0.268034] msm_rpm_dev_probe: APSS-RPM communication over SMD
237<6>[ 0.268655] pm8937_s1: 1000 <--> 1225 mV at 1000 mV normal idle
238<6>[ 0.269271] pm8937_s2_level: 0 <--> 0 mV at 0 mV normal idle
239<6>[ 0.269698] pm8937_s2_floor_level: 0 <--> 0 mV at 0 mV normal idle
240<6>[ 0.270164] pm8937_s2_level_ao: 0 <--> 0 mV at 0 mV normal idle
241<6>[ 0.270750] pm8937_s3: 1300 mV normal idle
242<6>[ 0.271355] pm8937_s4: 2050 mV normal idle
243<6>[ 0.271947] pm8937_l2: 1200 mV normal idle
244<6>[ 0.272516] pm8937_l3_level_ao: 0 <--> 0 mV at 0 mV normal idle
245<6>[ 0.272919] pm8937_l3_level_so: 0 <--> 0 mV at 0 mV normal idle
246<6>[ 0.273463] pm8937_l5: 1800 mV normal idle
247<6>[ 0.274003] pm8937_l6: 1800 mV normal idle
248<6>[ 0.274555] pm8937_l7: 1800 mV normal idle
249<6>[ 0.274969] pm8937_l7_ao: 1800 mV normal idle
250<6>[ 0.275508] pm8937_l8: 2850 <--> 2900 mV at 2900 mV normal idle
251<6>[ 0.276073] pm8937_l9: 3000 <--> 3300 mV at 3000 mV normal idle
252<6>[ 0.276642] pm8937_l10: 2800 <--> 3000 mV at 2800 mV normal idle
253<6>[ 0.277198] pm8937_l11: 2950 mV normal idle
254<6>[ 0.277774] pm8937_l12: 1800 <--> 2950 mV at 1800 mV normal idle
255<6>[ 0.278329] pm8937_l13: 3075 mV normal idle
256<6>[ 0.278901] pm8937_l14: 1800 <--> 3300 mV at 1800 mV normal idle
257<6>[ 0.279479] pm8937_l15: 1800 <--> 3300 mV at 1800 mV normal idle
258<6>[ 0.280080] pm8937_l16: 1800 mV normal idle
259<6>[ 0.280669] pm8937_l17: 2850 mV normal idle
260<6>[ 0.281259] pm8937_l19: 1225 <--> 1350 mV at 1225 mV normal idle
261<6>[ 0.281835] pm8937_l22: 2800 mV normal idle
262<6>[ 0.282427] pm8937_l23: 1200 mV normal idle
263<3>[ 0.282734] msm_mpm_dev_probe(): Cannot get clk resource for XO: -517
264<6>[ 0.283424] msm-thermal soc:qcom,msm-thermal: probe_therm_reset:Failed reading node=/soc/qcom,msm-thermal, key=qcom,therm-reset-temp err=-22. KTM continues
265<3>[ 0.283797] cpu cpu0: dev_pm_opp_get_opp_count: device OPP not found (-19)
266<3>[ 0.283807] msm_thermal:get_cpu_freq_plan_len Error reading CPU0 freq table len. error:-19
267<3>[ 0.283818] cpu cpu4: dev_pm_opp_get_opp_count: device OPP not found (-19)
268<3>[ 0.283826] msm_thermal:get_cpu_freq_plan_len Error reading CPU4 freq table len. error:-19
269<6>[ 0.283833] msm_thermal:vdd_restriction_reg_init Defer vdd rstr freq init.
270<3>[ 0.285352] cpu cpu0: dev_pm_opp_get_opp_count: device OPP not found (-19)
271<3>[ 0.285362] msm_thermal:get_cpu_freq_plan_len Error reading CPU0 freq table len. error:-19
272<3>[ 0.285373] cpu cpu4: dev_pm_opp_get_opp_count: device OPP not found (-19)
273<3>[ 0.285380] msm_thermal:get_cpu_freq_plan_len Error reading CPU4 freq table len. error:-19
274<3>[ 0.285391] cpu cpu0: dev_pm_opp_get_opp_count: device OPP not found (-19)
275<3>[ 0.285399] msm_thermal:get_cpu_freq_plan_len Error reading CPU0 freq table len. error:-19
276<3>[ 0.285408] cpu cpu4: dev_pm_opp_get_opp_count: device OPP not found (-19)
277<3>[ 0.285416] msm_thermal:get_cpu_freq_plan_len Error reading CPU4 freq table len. error:-19
278<6>[ 0.285805] cpu-clock-8939 b011050.qcom,cpu-clock-8939: No PVS version available. Defaulting to 0!
279<6>[ 0.285817] cpu-clock-8939 b011050.qcom,cpu-clock-8939: Speed bin: 0 PVS Version: 0
280<6>[ 0.286884] qcom,gcc-8952 1800000.qcom,gcc: GPU speed bin: 0
281<6>[ 0.300736] qcom,gcc-spm-8952 b111200.qcom,spm: Registered GCC SPM clocks
282<6>[ 0.300757] qcom,gcc-8952 1800000.qcom,gcc: Registered GCC clocks
283<6>[ 0.301509] cpu-clock-8939 b011050.qcom,cpu-clock-8939: No PVS version available. Defaulting to 0!
284<6>[ 0.301522] cpu-clock-8939 b011050.qcom,cpu-clock-8939: Speed bin: 0 PVS Version: 0
285<6>[ 0.303993] populate_opp_table: clock-cpu-8939: OPP tables populated (cpu 7 and 3)
286<6>[ 0.304003] print_opp_table: clock_cpu: a53_c0: OPP voltage for 768000000: 1120000
287<6>[ 0.304011] print_opp_table: clock_cpu: a53_c0: OPP voltage for 1094400000: 1240000
288<6>[ 0.304019] print_opp_table: clock_cpu: a53_c1: OPP voltage for 960000000: 1120000
289<6>[ 0.304026] print_opp_table: clock_cpu: a53_c1: OPP voltage for 1401000000: 1240000
290<3>[ 0.361939] qcom,qpnp-pin qpnp-pin-15: qpnp_pin_probe: no device nodes specified in topology
291<4>[ 0.361955] qcom,qpnp-pin: probe of qpnp-pin-15 failed with error -22
292<3>[ 0.362723] msm_cpuss_dump soc:cpuss_dump: Couldn't get memory for dumping
293<3>[ 0.362737] msm_cpuss_dump soc:cpuss_dump: Couldn't get memory for dumping
294<6>[ 0.365768] KPI: Bootloader start count = 31817
295<6>[ 0.365775] KPI: Bootloader end count = 325156
296<6>[ 0.365781] KPI: Bootloader display count = 48082
297<6>[ 0.365787] KPI: Bootloader load kernel count = 1579
298<6>[ 0.365794] KPI: Kernel MPM timestamp = 364336
299<6>[ 0.365799] KPI: Kernel MPM Clock frequency = 32768
300<6>[ 0.365822] socinfo_print: v0.10, id=294, ver=1.0, raw_id=79, raw_ver=0, hw_plat=96, hw_plat_ver=7
301<6>[ 0.365822] accessory_chip=0, hw_plat_subtype=0, pmic_model=65561, pmic_die_revision=65536 foundry_id=1 serial_number=4003259
302<6>[ 0.366557] adv_vreg: no parameters
303<5>[ 0.367630] SCSI subsystem initialized
304<6>[ 0.368271] usbcore: registered new interface driver usbfs
305<6>[ 0.368333] usbcore: registered new interface driver hub
306<6>[ 0.368522] usbcore: registered new device driver usb
307<6>[ 0.368944] i2c-msm-v2 78b6000.i2c: probing driver i2c-msm-v2
308<3>[ 0.369140] AXI: msm_bus_scale_register_client(): msm_bus_scale_register_client: Bus driver not ready.
309<6>[ 0.369152] i2c-msm-v2 78b6000.i2c: msm_bus_scale_register_client(mstr-id:86):0 (not a problem)
310<6>[ 0.370370] i2c-msm-v2 78b7000.i2c: probing driver i2c-msm-v2
311<3>[ 0.370555] AXI: msm_bus_scale_register_client(): msm_bus_scale_register_client: Bus driver not ready.
312<6>[ 0.370566] i2c-msm-v2 78b7000.i2c: msm_bus_scale_register_client(mstr-id:86):0 (not a problem)
313<6>[ 0.371331] i2c-msm-v2 7af5000.i2c: probing driver i2c-msm-v2
314<3>[ 0.371510] AXI: msm_bus_scale_register_client(): msm_bus_scale_register_client: Bus driver not ready.
315<6>[ 0.371520] i2c-msm-v2 7af5000.i2c: msm_bus_scale_register_client(mstr-id:84):0 (not a problem)
316<6>[ 0.372453] media: Linux media interface: v0.10
317<6>[ 0.372512] Linux video capture interface: v2.00
318<6>[ 0.375731] cpufreq: driver msm up and running
319<6>[ 0.376107] platform soc:qcom,ion:qcom,ion-heap@27: assigned reserved memory node qseecom_region@0
320<6>[ 0.376307] ION heap system created
321<6>[ 0.376464] ION heap qsecom created at 0xfec00000 with size 1000000
322<3>[ 0.376715] msm_bus_fabric_init_driver
323<4>[ 0.377534] msm_bus_device 580000.ad-hoc-bus: Coresight support absent for bus: 2048
324<6>[ 0.386738] qcom,qpnp-power-on qpnp-power-on-4: PMIC@SID0 Power-on reason: Triggered from PON1 (secondary PMIC) and 'cold' boot
325<6>[ 0.386759] qcom,qpnp-power-on qpnp-power-on-4: PMIC@SID0: Power-off reason: Triggered from UVLO (Under Voltage Lock Out)
326<6>[ 0.386921] input: qpnp_pon as /devices/virtual/input/input0
327<6>[ 0.387261] pon_spare_reg: no parameters
328<6>[ 0.387332] qcom,qpnp-power-on qpnp-power-on-13: No PON config. specified
329<6>[ 0.387381] qcom,qpnp-power-on qpnp-power-on-13: PMIC@SID2 Power-on reason: Triggered from PON1 (secondary PMIC) and 'cold' boot
330<6>[ 0.387397] qcom,qpnp-power-on qpnp-power-on-13: PMIC@SID2: Unknown power-off reason
331<6>[ 0.387567] PMIC@SID0: PM8937 v1.0 options: 0, 2, 0, 0
332<6>[ 0.387659] PMIC@SID2: PMI8950 v2.0 options: 0, 0, 0, 0
333<6>[ 0.388734] gdsc_venus: no parameters
334<6>[ 0.388969] gdsc_mdss: no parameters
335<6>[ 0.389210] gdsc_jpeg: no parameters
336<6>[ 0.389639] gdsc_vfe: no parameters
337<6>[ 0.390097] gdsc_vfe1: no parameters
338<6>[ 0.390337] gdsc_cpp: no parameters
339<6>[ 0.390510] gdsc_oxili_gx: no parameters
340<6>[ 0.390706] gdsc_venus_core0: fast normal
341<6>[ 0.390877] gdsc_oxili_cx: no parameters
342<6>[ 0.391849] mdss_pll_probe: MDSS pll label = MDSS DSI 0 PLL
343<6>[ 0.391855] mdss_pll_probe: mdss_pll_probe: label=MDSS DSI 0 PLL PLL SSC enabled
344<4>[ 0.391873] mdss_pll_util_parse_dt_supply: : error reading ulp load. rc=-22
345<4>[ 0.391884] mdss_pll_util_parse_dt_supply: : error reading ulp load. rc=-22
346<6>[ 0.392440] dsi_pll_clock_register_lpm: Registered DSI PLL:0 clocks successfully
347<6>[ 0.392467] mdss_pll_probe: MDSS pll label = MDSS DSI 1 PLL
348<6>[ 0.392473] mdss_pll_probe: mdss_pll_probe: label=MDSS DSI 1 PLL PLL SSC enabled
349<4>[ 0.392488] mdss_pll_util_parse_dt_supply: : error reading ulp load. rc=-22
350<4>[ 0.392499] mdss_pll_util_parse_dt_supply: : error reading ulp load. rc=-22
351<6>[ 0.394264] dsi_pll_clock_register_lpm: Registered DSI PLL:1 clocks successfully
352<6>[ 0.394747] msm_iommu 1e00000.qcom,iommu: device apps_iommu (model: 500) mapped at c5f80000, with 21 ctx banks
353<6>[ 0.400571] msm_iommu_ctx 1e20000.qcom,iommu-ctx: context q6 using bank 0
354<6>[ 0.400724] msm_iommu_ctx 1e21000.qcom,iommu-ctx: context adsp_sec_pixel using bank 1
355<6>[ 0.400878] msm_iommu_ctx 1e22000.qcom,iommu-ctx: context mdp_1 using bank 2
356<6>[ 0.401030] msm_iommu_ctx 1e23000.qcom,iommu-ctx: context venus_fw using bank 3
357<6>[ 0.401180] msm_iommu_ctx 1e24000.qcom,iommu-ctx: context venus_sec_non_pixel using bank 4
358<6>[ 0.401333] msm_iommu_ctx 1e25000.qcom,iommu-ctx: context venus_sec_bitstream using bank 5
359<6>[ 0.401484] msm_iommu_ctx 1e26000.qcom,iommu-ctx: context venus_sec_pixel using bank 6
360<6>[ 0.401661] msm_iommu_ctx 1e28000.qcom,iommu-ctx: context pronto_pil using bank 8
361<6>[ 0.401839] msm_iommu_ctx 1e29000.qcom,iommu-ctx: context mss_nav using bank 9
362<6>[ 0.402018] msm_iommu_ctx 1e2a000.qcom,iommu-ctx: context periph_rpm using bank 10
363<6>[ 0.402198] msm_iommu_ctx 1e2b000.qcom,iommu-ctx: context lpass using bank 11
364<6>[ 0.402377] msm_iommu_ctx 1e2f000.qcom,iommu-ctx: context adsp_io using bank 15
365<6>[ 0.402557] msm_iommu_ctx 1e30000.qcom,iommu-ctx: context adsp_opendsp using bank 16
366<6>[ 0.402736] msm_iommu_ctx 1e31000.qcom,iommu-ctx: context adsp_shared using bank 17
367<6>[ 0.402920] msm_iommu_ctx 1e32000.qcom,iommu-ctx: context cpp using bank 18
368<6>[ 0.403097] msm_iommu_ctx 1e33000.qcom,iommu-ctx: context jpeg_enc0 using bank 19
369<6>[ 0.403277] msm_iommu_ctx 1e34000.qcom,iommu-ctx: context vfe using bank 20
370<6>[ 0.403457] msm_iommu_ctx 1e35000.qcom,iommu-ctx: context mdp_0 using bank 21
371<6>[ 0.403635] msm_iommu_ctx 1e36000.qcom,iommu-ctx: context venus_ns using bank 22
372<6>[ 0.403813] msm_iommu_ctx 1e38000.qcom,iommu-ctx: context mss_mcdma using bank 24
373<6>[ 0.403997] msm_iommu_ctx 1e37000.qcom,iommu-ctx: context access_control using bank 23
374<3>[ 0.405550] /soc/qcom,cam_smmu/msm_cam_smmu_cb1: could not get #iommu-cells for /soc/qcom,iommu@1e00000
375<3>[ 0.405573] /soc/qcom,cam_smmu/msm_cam_smmu_cb3: could not get #iommu-cells for /soc/qcom,iommu@1e00000
376<3>[ 0.405594] /soc/qcom,cam_smmu/msm_cam_smmu_cb4: could not get #iommu-cells for /soc/qcom,iommu@1e00000
377<6>[ 0.407710] Advanced Linux Sound Architecture Driver Initialized.
378<6>[ 0.408411] Bluetooth: e2a07ec8
379<6>[ 0.408433] NET: Registered protocol family 31
380<6>[ 0.408437] Bluetooth: e2a07ec8
381<6>[ 0.408444] Bluetooth: e2a07ec0Bluetooth: e2a07ea8
382<6>[ 0.408472] Bluetooth: e2a07eb8<6>[ 0.408763] cfg80211: Calling CRDA to update world regulatory domain
383<6>[ 0.408782] cfg80211: World regulatory domain updated:
384<6>[ 0.408786] cfg80211: DFS Master region: unset
385<6>[ 0.408789] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
386<6>[ 0.408796] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
387<6>[ 0.408801] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
388<6>[ 0.408807] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A, 2000 mBm), (N/A)
389<6>[ 0.408812] cfg80211: (5170000 KHz - 5250000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A)
390<6>[ 0.408817] cfg80211: (5250000 KHz - 5330000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A)
391<6>[ 0.408822] cfg80211: (5490000 KHz - 5710000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A)
392<6>[ 0.408827] cfg80211: (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A)
393<6>[ 0.408832] cfg80211: (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm), (N/A)
394<6>[ 0.409402] ibb_reg: 4600 <--> 6000 mV at 5500 mV
395<6>[ 0.409762] lab_reg: 4600 <--> 6000 mV at 5500 mV
396<6>[ 0.412073] Switched to clocksource arch_sys_counter
397<6>[ 0.436433] NET: Registered protocol family 2
398<6>[ 0.436881] TCP established hash table entries: 8192 (order: 3, 32768 bytes)
399<6>[ 0.436931] TCP bind hash table entries: 8192 (order: 4, 65536 bytes)
400<6>[ 0.437012] TCP: Hash tables configured (established 8192 bind 8192)
401<6>[ 0.437043] TCP: reno registered
402<6>[ 0.437050] UDP hash table entries: 512 (order: 2, 16384 bytes)
403<6>[ 0.437071] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
404<6>[ 0.437191] NET: Registered protocol family 1
405<6>[ 0.438447] gcc-mdss-8952 soc:qcom,gcc-mdss@1800000: Registered GCC MDSS clocks.
406<6>[ 0.439448] Trying to unpack rootfs image as initramfs...
407<6>[ 0.620378] Freeing initrd memory: 5068K
408<6>[ 0.623313] hw perfevents: enabled with ARMv8 Cortex-A53 PMU driver, 7 counters available
409<6>[ 0.627221] futex hash table entries: 2048 (order: 5, 131072 bytes)
410<6>[ 0.627333] audit: initializing netlink subsys (disabled)
411<5>[ 0.627369] audit: type=2000 audit(0.619:1): initialized
412<4>[ 0.627778] vmscan: error setting kswapd cpu affinity mask
413<5>[ 0.631405] VFS: Disk quotas dquot_6.5.2
414<4>[ 0.631503] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
415<6>[ 0.632420] Registering sdcardfs 0.1
416<6>[ 0.632542] fuse init (API version 7.23)
417<7>[ 0.632745] SELinux: Registering netfilter hooks
418<6>[ 0.635049] bounce: pool size: 64 pages
419<6>[ 0.635137] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 250)
420<6>[ 0.635148] io scheduler noop registered
421<6>[ 0.635156] io scheduler deadline registered
422<6>[ 0.635175] io scheduler cfq registered (default)
423<4>[ 0.638358] adv7533_parse_vreg_dt: error read post on sleep. rc=-22
424<6>[ 0.638364] adv7533_parse_vreg_dt: hpd-5v-en min=0, max=0, enable=0 disable=0 post-on-sleep=0
425<3>[ 0.639361] i2c-msm-v2 78b6000.i2c: msm_bus_scale_register_client(mstr-id:86):0x1 (ok)
426<3>[ 0.639505] i2c-msm-v2 78b6000.i2c: NACK: slave not responding, ensure its powered: msgs(n:2 cur:0 tx) bc(rx:1 tx:1) mode:FIFO slv_addr:0x39 MSTR_STS:0x0d1300c8 OPER:0x00000010
427<3>[ 0.639528] msm_dba_helper_i2c_read: i2c read failed
428<3>[ 0.639533] adv7533_read: read err: addr 0x39, reg 0x0, size 0x1
429<3>[ 0.639537] adv7533_probe: Failed to read chip rev
430<4>[ 0.639589] adv7533: probe of 2-0039 failed with error -5
431<3>[ 0.639827] msm_dss_get_res_byname: 'vbif_nrt_phys' resource not found
432<3>[ 0.639837] mdss_mdp_probe+0x18c/0x106c->msm_dss_ioremap_byname: 'vbif_nrt_phys' msm_dss_get_res_byname failed
433<3>[ 0.640253] mdss_mdp_irq_clk_register: unable to get clk: lut_clk
434<3>[ 0.640689] No change in context(0==0), skip
435<6>[ 0.641160] mdss_mdp_pipe_addr_setup: type:0 ftchid:-1 xinid:0 num:0 rect:0 ndx:0x1 prio:0
436<6>[ 0.641181] mdss_mdp_pipe_addr_setup: type:1 ftchid:-1 xinid:1 num:3 rect:0 ndx:0x8 prio:1
437<6>[ 0.641187] mdss_mdp_pipe_addr_setup: type:1 ftchid:-1 xinid:5 num:4 rect:0 ndx:0x10 prio:2
438<6>[ 0.641206] mdss_mdp_pipe_addr_setup: type:2 ftchid:-1 xinid:2 num:6 rect:0 ndx:0x40 prio:3
439<6>[ 0.641223] mdss_mdp_pipe_addr_setup: type:3 ftchid:-1 xinid:7 num:10 rect:0 ndx:0x400 prio:0
440<3>[ 0.641237] mdss_mdp_parse_dt_handler: Error from prop qcom,mdss-pipe-sw-reset-off : u32 array read
441<3>[ 0.641354] mdss_mdp_parse_dt_handler: Error from prop qcom,mdss-ib-factor-overlap : u32 array read
442<6>[ 0.641601] xlog_status: enable:0, panic:1, dump:3
443<6>[ 0.642249] mdss_mdp_probe: mdss version = 0x100e0000, bootloader display is on, num 1, intf_sel=0x00000100
444<3>[ 0.643883] mdss_smmu_util_parse_dt_clock: clocks are not defined
445<6>[ 0.643913] mdss_smmu_probe: iommu v2 domain[0] mapping and clk register successful!
446<3>[ 0.643934] mdss_smmu_util_parse_dt_clock: clocks are not defined
447<6>[ 0.643944] mdss_smmu_probe: iommu v2 domain[2] mapping and clk register successful!
448<4>[ 0.645132] mdss_dsi_get_dt_vreg_data: error reading ulp load. rc=-22
449<4>[ 0.645146] mdss_dsi_get_dt_vreg_data: error reading ulp load. rc=-22
450<4>[ 0.645159] mdss_dsi_get_dt_vreg_data: error reading ulp load. rc=-22
451<6>[ 0.645671] mdss_dsi_ctrl_probe: DSI Ctrl name = MDSS DSI CTRL->0
452<6>[ 0.646136] mdss_dsi_find_panel_of_node: cmdline:0:qcom,mdss_dsi_lgd_incell_db7400_hd_video:1:none:cfg:single_dsi panel_name:qcom,mdss_dsi_lgd_incell_db7400_hd_video
453<6>[ 0.646201] mdss_dsi_panel_init: Panel Name = LGD DONGBU HITEK INCELL HD video mode dsi panel
454<6>[ 0.646408] mdss_dsi_panel_timing_from_dt: found new timing "qcom,mdss_dsi_lgd_incell_db7400_hd_video" (e2a07800)
455<3>[ 0.646431] mdss_dsi_parse_dcs_cmds: failed, key=qcom,mdss-dsi-post-panel-on-command
456<3>[ 0.646441] mdss_dsi_parse_dcs_cmds: failed, key=qcom,mdss-dsi-timing-switch-command
457<4>[ 0.646445] mdss_dsi_panel_get_dsc_cfg_np: cannot find dsc config node:
458<3>[ 0.646569] mdss_dsi_parse_dcs_cmds: failed, key=qcom,mdss-dsi-idle-on-command
459<3>[ 0.646578] mdss_dsi_parse_dcs_cmds: failed, key=qcom,mdss-dsi-idle-off-command
460<6>[ 0.646607] mdss_dsi_parse_panel_features: ulps feature disabled
461<6>[ 0.646614] mdss_dsi_parse_panel_features: ulps during suspend feature disabled
462<6>[ 0.646622] mdss_dsi_parse_dms_config: dynamic switch feature enabled: 0
463<3>[ 0.646646] mdss_dsi_parse_dcs_cmds: failed, key=qcom,mdss-dsi-lp-mode-on
464<3>[ 0.646655] mdss_dsi_parse_dcs_cmds: failed, key=qcom,mdss-dsi-lp-mode-off
465<6>[ 0.646748] lge_mdss_panel_parse_dt_extra: esc-clk-rate not specified
466<6>[ 0.646754] lge_mdss_panel_parse_dt_extra: failed to parse panel_id
467<6>[ 0.646759] parse_dt_extra_dcs_cmds: num_extra_cmds=1
468<6>[ 0.646832] lge_set_display_power_ctrl: display_power_ctrl [0]
469<6>[ 0.646836] lge_init_mfts: mfts_mode : 0
470<4>[ 0.646903] mdss_dsi_get_dt_vreg_data: error reading ulp load. rc=-22
471<3>[ 0.646967] no supply entry present: lge,extra-supply-entries
472<3>[ 0.646987] mdss_dsi_parse_ctrl_params:4175 Unable to read qcom,display-id, data=00000000,len=45
473<3>[ 0.646995] mdss_dsi_parse_gpio_params:4210, TE gpio not specified
474<6>[ 0.647000] mdss_dsi_parse_gpio_params: bklt_en gpio not specified
475<6>[ 0.647012] lge_mdss_dsi_parse_gpio_params: num_gpios=4
476<6>[ 0.647058] mdss_dsi_retrieve_ctrl_resources: phy_regulator_base=c5a10b80 phy_regulator_size=30
477<6>[ 0.647063] mdss_dsi_retrieve_ctrl_resources: ctrl_base=c5a0c000 ctrl_size=300 phy_base=c5a0e400 phy_size=280
478<6>[ 0.647154] dsi_panel_device_register: Continuous splash enabled
479<6>[ 0.647317] mdss_register_panel: adding framebuffer device 1a94000.qcom,mdss_dsi_ctrl0
480<6>[ 0.647703] mdss_dsi_panel_reset: + enable = 1 (override: ph2n_tmo_us)
481<6>[ 0.647708] mdss_dsi_panel_reset: -
482<6>[ 0.668323] mdss_dsi_ctrl_probe: Dsi Ctrl->0 initialized, DSI rev:0x10040002, PHY rev:0x1
483<6>[ 0.668512] mdss_dsi_ctrl_probe: DSI Ctrl name = MDSS DSI CTRL->1
484<3>[ 0.668519] mdss_dsi_pinctrl_init: failed to get pinctrl
485<4>[ 0.668523] mdss_dsi_ctrl_probe: failed to get pin resources
486<6>[ 0.668931] mdss_dsi_find_panel_of_node: cmdline:0:qcom,mdss_dsi_lgd_incell_db7400_hd_video:1:none:cfg:single_dsi panel_name:none
487<3>[ 0.668937] mdss_dsi_config_panel: can't find panel node 0:qcom,mdss_dsi_lgd_incell_db7400_hd_video:1:none:cfg:single_dsi
488<3>[ 0.668941] mdss_dsi_ctrl_probe: panel configuration failed
489<4>[ 0.668951] mdss_dsi_ctrl: probe of 1a96000.qcom,mdss_dsi_ctrl1 failed with error -22
490<6>[ 0.669058] mdss_dsi_status_init: DSI status check interval:1700
491<6>[ 0.669464] mdss_register_panel: adding framebuffer device soc:qcom,mdss_wb_panel
492<6>[ 0.669947] mdss_fb_probe: fb0: split_mode:0 left:0 right:0
493<6>[ 0.670400] mdss_fb_register: FrameBuffer[0] 720x1280 registered successfully!
494<6>[ 0.670806] mdss_fb_probe: fb1: split_mode:0 left:0 right:0
495<6>[ 0.670897] mdss_fb_register: FrameBuffer[1] 640x640 registered successfully!
496<3>[ 0.670996] mdss_mdp_splash_parse_dt: splash mem child node is not present
497<3>[ 0.673237] IPC_RTR: msm_ipc_router_smd_driver_register Already driver registered IPCRTR
498<3>[ 0.673259] IPC_RTR: msm_ipc_router_smd_driver_register Already driver registered IPCRTR
499<6>[ 0.677811] In memshare_probe, Memshare probe success
500<5>[ 0.679348] msm_rpm_log_probe: OK
501<6>[ 0.682141] subsys-pil-tz 1de0000.qcom,venus: for venus segments only will be dumped.
502<6>[ 0.684331] bootlog_probe: start 0x3574
503<6>[ 0.684336] bootlog_probe: size 0x1fff4
504<6>[ 0.684339] -------------------------------------------------
505<6>[ 0.684342] below logs are got from bootloader
506<6>[ 0.684345] -------------------------------------------------
507<6>[ 0.684348]
508<6>[ 0.684352]
509<6>[ 0.684377] Format: Log Type - Time(microsec) - Message - Optional Info
510<6>[ 0.684405] Log Type: B - Since Boot(Power On Reset), D - Delta, S - Statistic
511<6>[ 0.684424] B - 315553 - Earjack Debugger Detected
512<6>[ 0.684444] S - QC_IMAGE_VERSION_STRING=BOOT.BF.3.3-00155
513<6>[ 0.684460] S - IMAGE_VARIANT_STRING=FAASANAZA
514<6>[ 0.684475] S - OEM_IMAGE_VERSION_STRING=LGE
515<6>[ 0.684488] S - Boot Config, 0x000000e1
516<6>[ 0.684501] B - 246 - PBL, Start
517<6>[ 0.684523] B - 2949 - bootable_media_detect_entry, Start
518<6>[ 0.684546] B - 136534 - bootable_media_detect_success, Start
519<6>[ 0.684563] B - 136540 - elf_loader_entry, Start
520<6>[ 0.684582] B - 138215 - auth_hash_seg_entry, Start
521<6>[ 0.684601] B - 175327 - auth_hash_seg_exit, Start
522<6>[ 0.684622] B - 205574 - elf_segs_hash_verify_entry, Start
523<6>[ 0.684634] B - 302358 - PBL, End
524<6>[ 0.684648] B - 314851 - SBL1, Start
525<6>[ 0.684665] B - 369141 - pm_device_init, Start
526<6>[ 0.684688] B - 372252 - PON REASON:PM0:0x2000000000a0 PM1:0x20
527<6>[ 0.684706] B - 396988 - boot_flash_init, Start
528<6>[ 0.684727] B - 397018 - boot_config_data_table_init, Start
529<6>[ 0.684759] B - 398604 - CDT version:3,Platform ID:96,Major ID:1,Minor ID:0,Subtype:0
530<6>[ 0.684778] B - 405558 - sbl1_ddr_set_params, Start
531<6>[ 0.684793] B - 430019 - cpr_init, Start
532<6>[ 0.684811] B - 433710 - Pre_DDR_clock_init, Start
533<6>[ 0.684830] B - 435814 - do ddr sanity test, Start
534<6>[ 0.684846] B - 436119 - pm_driver_init, Start
535<6>[ 0.684862] B - 441457 - vsense_init, Start
536<6>[ 0.684882] D - 274 - DDR Training restore, Delta
537<6>[ 0.684897] B - 452955 - clock_init, Start
538<6>[ 0.684917] B - 453230 - pm_sbl_set_qpnp_smb_init start
539<6>[ 0.684936] B - 454145 - raw vbat: 4095, gain: -19
540<6>[ 0.684954] B - 457683 - raw vbat: 4095, gain: -19
541<6>[ 0.684967] B - 471713 - Img Ld, S
542<6>[ 0.684992] D - 105957 - QSEE Image Loaded, Delta - (1370364 Bytes)
543<6>[ 0.685007] B - 588040 - Image Load, Start
544<6>[ 0.685030] D - 2318 - SEC Image Loaded, Delta - (2048 Bytes)
545<6>[ 0.685051] B - 591029 - sbl1_efs_handle_cookies, Start
546<6>[ 0.685065] B - 604845 - Board_rev:1.1
547<6>[ 0.685082] B - 604906 - read_usb_cable_type, s
548<6>[ 0.685103] B - 609451 - [ADC][usb_id=1787][cable_type=12]
549<6>[ 0.685124] B - 692258 - boot_power_longkey_check, start
550<6>[ 0.685148] B - 692319 - boot_cause = 0xa0, warm_boot_cause = 0x0
551<6>[ 0.685167] D - 13298 - boot_power_longkey, Delta
552<6>[ 0.685179] B - 705617 - Img Ld, S
553<6>[ 0.685204] D - 38339 - DEVCFG Image Loaded, Delta - (47756 Bytes)
554<6>[ 0.685216] B - 744444 - Img Ld, S
555<6>[ 0.685240] D - 34709 - APDP Image Loaded, Delta - (7696 Bytes)
556<6>[ 0.685252] B - 779183 - Img Ld, S
557<6>[ 0.685276] D - 46940 - RPM Image Loaded, Delta - (179504 Bytes)
558<6>[ 0.685289] B - 826153 - Img Ld, S
559<6>[ 0.685314] D - 67131 - APPSBL Image Loaded, Delta - (666520 Bytes)
560<6>[ 0.685331] B - 893314 - QSEE Execution, Start
561<6>[ 0.685344] B - 895693 - SBL1, End
562<6>[ 0.685357] D - 583130 - SBL1, Delta
563<6>[ 0.685370] S - Flash Perf, 22000 KB/s
564<6>[ 0.685381] S - DDR Freq. 662 MHz
565<6>[ 0.685393] S - Core 0 Freq. 800 MHz
566<6>[ 0.685405] [40] card->ext_csd[192]=7
567<6>[ 0.685445] [40] [FS] tuned_phase_cnt: 15 tuned_phases = [ 0, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 15, ]
568<6>[ 0.685470] [40] [FS] sdhci_msm_execute_tuning: Tuned Phase: 0x0000000c
569<6>[ 0.685486] [50] set_dload_mode: download_mode:0
570<6>[ 0.685499] [50] Unsupported hardware id
571<6>[ 0.685514] [50] Qseecom Init Done in Appsbl
572<6>[ 0.685563] [50] secure app region addr=0x85500000 size=0xe00000[50] TZ App region notif returned with status:0 addr:85500000 size:14680064
573<6>[ 0.685595] [50] TZ App log region register returned with status:0 addr:8f6c1000 size:4096
574<6>[ 0.685611] [50] Qseecom TZ Init Done in Appsbl
575<6>[ 0.685623] [70] Loading cmnlib done
576<6>[ 0.685641] [90] <8>keymaster: "\"KEYMASTER Init \""
577<6>[ 0.685667] [100] <8>keymaster: "\"cmd_id=KEYMASTER_READ_KM_DEVICE_STATE\""
578<6>[ 0.685687] [110] oem.panel D : lgd_incell_db7400_hd_video
579<6>[ 0.685705] [240] Display Power Mode : 0, status : 0
580<6>[ 0.685724] [520] target_home_key: should be implemented
581<6>[ 0.685743] [730] target_home_key: should be implemented
582<6>[ 0.685763] [940] target_home_key: should be implemented
583<6>[ 0.685782] [1150] target_home_key: should be implemented
584<6>[ 0.685802] [1360] target_home_key: should be implemented
585<6>[ 0.685821] [1570] target_home_key: should be implemented
586<6>[ 0.685841] [1780] target_home_key: should be implemented
587<6>[ 0.685860] [1990] target_home_key: should be implemented
588<6>[ 0.685880] [2200] target_home_key: should be implemented
589<6>[ 0.685900] [2410] target_home_key: should be implemented
590<6>[ 0.685919] [2620] target_home_key: should be implemented
591<6>[ 0.685939] [2830] target_home_key: should be implemented
592<6>[ 0.685958] [3040] target_home_key: should be implemented
593<6>[ 0.685978] [3250] target_home_key: should be implemented
594<6>[ 0.685998] [3460] target_home_key: should be implemented
595<6>[ 0.686017] [3670] target_home_key: should be implemented
596<6>[ 0.686037] [3880] target_home_key: should be implemented
597<6>[ 0.686056] [4090] target_home_key: should be implemented
598<6>[ 0.686076] [4300] target_home_key: should be implemented
599<6>[ 0.686096] [4510] target_home_key: should be implemented
600<6>[ 0.686115] [4720] target_home_key: should be implemented
601<6>[ 0.686138] [4720] target_selectmode_init: selectmode_get_mode()=3
602<6>[ 0.686160] [4720] get_image_info: img_info[0].name lglogo_image
603<6>[ 0.686184] [4720] get_image_info: img_info[1].name LGE_PM_NO_CHARGER
604<6>[ 0.686210] [4720] get_image_info: img_info[2].name LGE_PM_WEAK_CHARGING_ON
605<6>[ 0.686237] [4720] get_image_info: img_info[3].name LGE_PM_NO_BATTERY_ANI_01
606<6>[ 0.686263] [4720] get_image_info: img_info[4].name LGE_PM_NO_BATTERY_ANI_02
607<6>[ 0.686286] [4720] get_image_info: img_info[5].name downloadmode
608<6>[ 0.686310] [4720] get_image_info: img_info[6].name load_charger_image
609<6>[ 0.686337] [4720] get_image_info: img_info[7].name factory_reset_no_1st_image
610<6>[ 0.686365] [4720] get_image_info: img_info[8].name factory_reset_yes_1st_image
611<6>[ 0.686392] [4720] get_image_info: img_info[9].name factory_reset_no_2nd_image
612<6>[ 0.686420] [4720] get_image_info: img_info[10].name factory_reset_yes_2nd_image
613<6>[ 0.686444] [4720] get_image_info: img_info[11].name imei_guide_image
614<6>[ 0.686468] [4720] get_image_info: img_info[12].name imei_main_image
615<6>[ 0.686491] [4720] get_image_info: img_info[13].name kswitch_factory
616<6>[ 0.686514] [4720] get_image_info: img_info[14].name kswitch_dload
617<6>[ 0.686537] [4720] get_image_info: img_info[15].name system_errlogo
618<6>[ 0.686562] [4720] get_image_info: img_info[16].name verifiedboot_red_01
619<6>[ 0.686588] [4720] get_image_info: img_info[17].name verifiedboot_red_02
620<6>[ 0.686614] [4720] get_image_info: img_info[18].name verifiedboot_orange_01
621<6>[ 0.686640] [4720] get_image_info: img_info[19].name verifiedboot_orange_02
622<6>[ 0.686666] [4720] get_image_info: img_info[20].name verifiedboot_yellow_01
623<6>[ 0.686692] [4720] get_image_info: img_info[21].name verifiedboot_yellow_02
624<6>[ 0.686710] [4720] get_image_info: Image not found
625<6>[ 0.686732] [4720] get_image_info: img_info[0].name lglogo_image
626<6>[ 0.686756] [4720] get_image_info: img_info[1].name LGE_PM_NO_CHARGER
627<6>[ 0.686782] [4720] get_image_info: img_info[2].name LGE_PM_WEAK_CHARGING_ON
628<6>[ 0.686808] [4720] get_image_info: img_info[3].name LGE_PM_NO_BATTERY_ANI_01
629<6>[ 0.686835] [4720] get_image_info: img_info[4].name LGE_PM_NO_BATTERY_ANI_02
630<6>[ 0.686857] [4720] get_image_info: img_info[5].name downloadmode
631<6>[ 0.686882] [4720] get_image_info: img_info[6].name load_charger_image
632<6>[ 0.686909] [4720] get_image_info: img_info[7].name factory_reset_no_1st_image
633<6>[ 0.686936] [4720] get_image_info: img_info[8].name factory_reset_yes_1st_image
634<6>[ 0.686964] [4720] get_image_info: img_info[9].name factory_reset_no_2nd_image
635<6>[ 0.686992] [4720] get_image_info: img_info[10].name factory_reset_yes_2nd_image
636<6>[ 0.687016] [4720] get_image_info: img_info[11].name imei_guide_image
637<6>[ 0.687039] [4720] get_image_info: img_info[12].name imei_main_image
638<6>[ 0.687063] [4720] get_image_info: img_info[13].name kswitch_factory
639<6>[ 0.687086] [4720] get_image_info: img_info[14].name kswitch_dload
640<6>[ 0.687109] [4720] get_image_info: img_info[15].name system_errlogo
641<6>[ 0.687134] [4720] get_image_info: img_info[16].name verifiedboot_red_01
642<6>[ 0.687159] [4720] get_image_info: img_info[17].name verifiedboot_red_02
643<6>[ 0.687185] [4720] get_image_info: img_info[18].name verifiedboot_orange_01
644<6>[ 0.687212] [4720] get_image_info: img_info[19].name verifiedboot_orange_02
645<6>[ 0.687238] [4720] get_image_info: img_info[20].name verifiedboot_yellow_01
646<6>[ 0.687264] [4720] get_image_info: img_info[21].name verifiedboot_yellow_02
647<6>[ 0.687281] [4720] get_image_info: Image not found
648<6>[ 0.687303] [4720] get_image_info: img_info[0].name lglogo_image
649<6>[ 0.687327] [4720] get_image_info: img_info[1].name LGE_PM_NO_CHARGER
650<6>[ 0.687353] [4720] get_image_info: img_info[2].name LGE_PM_WEAK_CHARGING_ON
651<6>[ 0.687380] [4720] get_image_info: img_info[3].name LGE_PM_NO_BATTERY_ANI_01
652<6>[ 0.687406] [4720] get_image_info: img_info[4].name LGE_PM_NO_BATTERY_ANI_02
653<6>[ 0.687428] [4720] get_image_info: img_info[5].name downloadmode
654<6>[ 0.687453] [4720] get_image_info: img_info[6].name load_charger_image
655<6>[ 0.687480] [4720] get_image_info: img_info[7].name factory_reset_no_1st_image
656<6>[ 0.687502] [5940] get_image_info: img_info[0].name lglogo_image
657<6>[ 0.687526] [5940] get_image_info: img_info[1].name LGE_PM_NO_CHARGER
658<6>[ 0.687552] [5940] get_image_info: img_info[2].name LGE_PM_WEAK_CHARGING_ON
659<6>[ 0.687579] [5940] get_image_info: img_info[3].name LGE_PM_NO_BATTERY_ANI_01
660<6>[ 0.687605] [5940] get_image_info: img_info[4].name LGE_PM_NO_BATTERY_ANI_02
661<6>[ 0.687628] [5940] get_image_info: img_info[5].name downloadmode
662<6>[ 0.687652] [5940] get_image_info: img_info[6].name load_charger_image
663<6>[ 0.687679] [5940] get_image_info: img_info[7].name factory_reset_no_1st_image
664<6>[ 0.687707] [5940] get_image_info: img_info[8].name factory_reset_yes_1st_image
665<6>[ 0.687729] [6550] get_image_info: img_info[0].name lglogo_image
666<6>[ 0.687753] [6550] get_image_info: img_info[1].name LGE_PM_NO_CHARGER
667<6>[ 0.687779] [6550] get_image_info: img_info[2].name LGE_PM_WEAK_CHARGING_ON
668<6>[ 0.687806] [6550] get_image_info: img_info[3].name LGE_PM_NO_BATTERY_ANI_01
669<6>[ 0.687832] [6550] get_image_info: img_info[4].name LGE_PM_NO_BATTERY_ANI_02
670<6>[ 0.687854] [6550] get_image_info: img_info[5].name downloadmode
671<6>[ 0.687879] [6550] get_image_info: img_info[6].name load_charger_image
672<6>[ 0.687906] [6550] get_image_info: img_info[7].name factory_reset_no_1st_image
673<6>[ 0.687933] [6550] get_image_info: img_info[8].name factory_reset_yes_1st_image
674<6>[ 0.687961] [6550] get_image_info: img_info[9].name factory_reset_no_2nd_image
675<6>[ 0.687989] [6550] get_image_info: img_info[10].name factory_reset_yes_2nd_image
676<6>[ 0.688013] [6550] get_image_info: img_info[11].name imei_guide_image
677<6>[ 0.688036] [6550] get_image_info: img_info[12].name imei_main_image
678<6>[ 0.688060] [6550] get_image_info: img_info[13].name kswitch_factory
679<6>[ 0.688083] [6550] get_image_info: img_info[14].name kswitch_dload
680<6>[ 0.688106] [6550] get_image_info: img_info[15].name system_errlogo
681<6>[ 0.688131] [6550] get_image_info: img_info[16].name verifiedboot_red_01
682<6>[ 0.688156] [6550] get_image_info: img_info[17].name verifiedboot_red_02
683<6>[ 0.688182] [6550] get_image_info: img_info[18].name verifiedboot_orange_01
684<6>[ 0.688209] [6550] get_image_info: img_info[19].name verifiedboot_orange_02
685<6>[ 0.688235] [6550] get_image_info: img_info[20].name verifiedboot_yellow_01
686<6>[ 0.688261] [6550] get_image_info: img_info[21].name verifiedboot_yellow_02
687<6>[ 0.688278] [6550] get_image_info: Image not found
688<6>[ 0.688300] [6550] get_image_info: img_info[0].name lglogo_image
689<6>[ 0.688324] [6550] get_image_info: img_info[1].name LGE_PM_NO_CHARGER
690<6>[ 0.688350] [6550] get_image_info: img_info[2].name LGE_PM_WEAK_CHARGING_ON
691<6>[ 0.688377] [6550] get_image_info: img_info[3].name LGE_PM_NO_BATTERY_ANI_01
692<6>[ 0.688403] [6550] get_image_info: img_info[4].name LGE_PM_NO_BATTERY_ANI_02
693<6>[ 0.688425] [6550] get_image_info: img_info[5].name downloadmode
694<6>[ 0.688450] [6550] get_image_info: img_info[6].name load_charger_image
695<6>[ 0.688477] [6550] get_image_info: img_info[7].name factory_reset_no_1st_image
696<6>[ 0.688504] [6550] get_image_info: img_info[8].name factory_reset_yes_1st_image
697<6>[ 0.688532] [6550] get_image_info: img_info[9].name factory_reset_no_2nd_image
698<6>[ 0.688574] [6550] get_image_info: img_info[10].name factory_reset_yes_2nd_image
699<6>[ 0.688598] [6550] get_image_info: img_info[11].name imei_guide_image
700<6>[ 0.688621] [6550] get_image_info: img_info[12].name imei_main_image
701<6>[ 0.688645] [6550] get_image_info: img_info[13].name kswitch_factory
702<6>[ 0.688668] [6550] get_image_info: img_info[14].name kswitch_dload
703<6>[ 0.688691] [6550] get_image_info: img_info[15].name system_errlogo
704<6>[ 0.688717] [6550] get_image_info: img_info[16].name verifiedboot_red_01
705<6>[ 0.688742] [6550] get_image_info: img_info[17].name verifiedboot_red_02
706<6>[ 0.688768] [6550] get_image_info: img_info[18].name verifiedboot_orange_01
707<6>[ 0.688794] [6550] get_image_info: img_info[19].name verifiedboot_orange_02
708<6>[ 0.688820] [6550] get_image_info: img_info[20].name verifiedboot_yellow_01
709<6>[ 0.688847] [6550] get_image_info: img_info[21].name verifiedboot_yellow_02
710<6>[ 0.688865] [6550] get_image_info: Image not found
711<6>[ 0.688887] [6550] get_image_info: img_info[0].name lglogo_image
712<6>[ 0.688912] [6550] get_image_info: img_info[1].name LGE_PM_NO_CHARGER
713<6>[ 0.688938] [6550] get_image_info: img_info[2].name LGE_PM_WEAK_CHARGING_ON
714<6>[ 0.688965] [6550] get_image_info: img_info[3].name LGE_PM_NO_BATTERY_ANI_01
715<6>[ 0.688992] [6550] get_image_info: img_info[4].name LGE_PM_NO_BATTERY_ANI_02
716<6>[ 0.689015] [6550] get_image_info: img_info[5].name downloadmode
717<6>[ 0.689039] [6550] get_image_info: img_info[6].name load_charger_image
718<6>[ 0.689067] [6550] get_image_info: img_info[7].name factory_reset_no_1st_image
719<6>[ 0.689095] [6550] get_image_info: img_info[8].name factory_reset_yes_1st_image
720<6>[ 0.689122] [6550] get_image_info: img_info[9].name factory_reset_no_2nd_image
721<6>[ 0.689146] [7590] get_image_info: img_info[0].name lglogo_image
722<6>[ 0.689170] [7590] get_image_info: img_info[1].name LGE_PM_NO_CHARGER
723<6>[ 0.689196] [7590] get_image_info: img_info[2].name LGE_PM_WEAK_CHARGING_ON
724<6>[ 0.689223] [7590] get_image_info: img_info[3].name LGE_PM_NO_BATTERY_ANI_01
725<6>[ 0.689250] [7590] get_image_info: img_info[4].name LGE_PM_NO_BATTERY_ANI_02
726<6>[ 0.689274] [7590] get_image_info: img_info[5].name downloadmode
727<6>[ 0.689298] [7590] get_image_info: img_info[6].name load_charger_image
728<6>[ 0.689325] [7590] get_image_info: img_info[7].name factory_reset_no_1st_image
729<6>[ 0.689353] [7590] get_image_info: img_info[8].name factory_reset_yes_1st_image
730<6>[ 0.689380] [7590] get_image_info: img_info[9].name factory_reset_no_2nd_image
731<6>[ 0.689410] [7590] get_image_info: img_info[10].name factory_reset_yes_2nd_image
732<6>[ 0.689427] [8480] LGFTM_LAF_MID_REBOOT_FLAG is 0
733<6>[ 0.689441] [8480] [LAF] boot_into_laf = 0
734<6>[ 0.689456] [8480] LGE_DMS - CRC = 0 STAGE= 0
735<6>[ 0.689473] [8480] boot from recovery partition
736<6>[ 0.689485] [8480] Device is unlocked!
737<6>[ 0.689507] [8590] get_image_info: img_info[0].name lglogo_image
738<6>[ 0.689532] [8590] get_image_info: img_info[1].name LGE_PM_NO_CHARGER
739<6>[ 0.689559] [8590] get_image_info: img_info[2].name LGE_PM_WEAK_CHARGING_ON
740<6>[ 0.689586] [8590] get_image_info: img_info[3].name LGE_PM_NO_BATTERY_ANI_01
741<6>[ 0.689612] [8590] get_image_info: img_info[4].name LGE_PM_NO_BATTERY_ANI_02
742<6>[ 0.689635] [8590] get_image_info: img_info[5].name downloadmode
743<6>[ 0.689659] [8590] get_image_info: img_info[6].name load_charger_image
744<6>[ 0.689687] [8590] get_image_info: img_info[7].name factory_reset_no_1st_image
745<6>[ 0.689716] [8590] get_image_info: img_info[8].name factory_reset_yes_1st_image
746<6>[ 0.689743] [8590] get_image_info: img_info[9].name factory_reset_no_2nd_image
747<6>[ 0.689771] [8590] get_image_info: img_info[10].name factory_reset_yes_2nd_image
748<6>[ 0.689795] [8590] get_image_info: img_info[11].name imei_guide_image
749<6>[ 0.689819] [8590] get_image_info: img_info[12].name imei_main_image
750<6>[ 0.689844] [8590] get_image_info: img_info[13].name kswitch_factory
751<6>[ 0.689867] [8590] get_image_info: img_info[14].name kswitch_dload
752<6>[ 0.689890] [8590] get_image_info: img_info[15].name system_errlogo
753<6>[ 0.689916] [8590] get_image_info: img_info[16].name verifiedboot_red_01
754<6>[ 0.689941] [8590] get_image_info: img_info[17].name verifiedboot_red_02
755<6>[ 0.689969] [8590] get_image_info: img_info[18].name verifiedboot_orange_01
756<6>[ 0.689995] [8590] get_image_info: img_info[19].name verifiedboot_orange_02
757<6>[ 0.690003] [8600] EIO !!!
758<6>[ 0.690025] [8910] <8>keymaster: "\"cmd_id=KEYMASTER_SET_ROT\""
759<6>[ 0.690056] [8920] No unlock key!
760<6>[ 0.690082] [8940] <8>keymaster: "\"cmd_id=KEYMASTER_MILESTONE_CALL\""
761<6>[ 0.690100] [8940] Qseecom De-Init Done in Appsbl
762<6>[ 0.690113] [8940] Channel alloc freed
763<6>[ 0.690116]
764<6>[ 0.690120] bootlog_probe: token (null)
765<6>[ 0.690123] -------------------------------------------------
766<4>[ 0.690129] Trying to free nonexistent resource <00000000affc0000-00000000affdffff>
767<6>[ 0.690665] [QFUSE]lge_qfprom_probe : qfprom init
768<6>[ 0.691169] msm_serial_hs module loaded
769<6>[ 0.701535] kgsl_pool_config: Pool order:4 not supprted.!!
770<6>[ 0.707002] brd: module loaded
771<6>[ 0.708754] loop: module loaded
772<6>[ 0.709014] zram: Created 1 device(s) ...
773<6>[ 0.709311] QSEECOM: qseecom_probe: qseecom.qsee_version = 0x1000000
774<4>[ 0.709337] QSEECOM: qseecom_retrieve_ce_data: Device does not support PFE
775<6>[ 0.709346] QSEECOM: qseecom_probe: qseecom clocks handled by other subsystem
776<4>[ 0.709351] QSEECOM: qseecom_probe: qsee reentrancy support phase is not defined, setting to default 0
777<4>[ 0.709811] QSEECOM: qseecom_probe: qseecom.whitelist_support = 1
778<4>[ 0.711312] i2c-core: driver [tabla-i2c-core] using legacy suspend method
779<4>[ 0.711317] i2c-core: driver [tabla-i2c-core] using legacy resume method
780<4>[ 0.711393] i2c-core: driver [wcd9xxx-i2c-core] using legacy suspend method
781<4>[ 0.711397] i2c-core: driver [wcd9xxx-i2c-core] using legacy resume method
782<4>[ 0.711478] i2c-core: driver [tasha-i2c-core] using legacy suspend method
783<4>[ 0.711482] i2c-core: driver [tasha-i2c-core] using legacy resume method
784<6>[ 0.712004] QCE50: __qce_get_device_tree_data: BAM Apps EE is not defined, setting to default 1
785<6>[ 0.712625] qce 720000.qcedev: Qualcomm Crypto 5.3.3 device found @0x720000
786<6>[ 0.712635] qce 720000.qcedev: CE device = 0x0
787<6>[ 0.712635] IO base, CE = 0xc6140000
788<6>[ 0.712635] Consumer (IN) PIPE 2, Producer (OUT) PIPE 3
789<6>[ 0.712635] IO base BAM = 0x00000000
790<6>[ 0.712635] BAM IRQ 53
791<6>[ 0.712635] Engines Availability = 0x2010853
792<6>[ 0.712817] sps:BAM 0x00704000 is registered.
793<6>[ 0.713003] sps:BAM 0x00704000 (va:0xc6300000) enabled: ver:0x27, number of pipes:8
794<6>[ 0.713253] QCE50: qce_sps_init: Qualcomm MSM CE-BAM at 0x0000000000704000 irq 53
795<6>[ 0.715859] QCE50: __qce_get_device_tree_data: BAM Apps EE is not defined, setting to default 1
796<6>[ 0.716754] qcrypto 720000.qcrypto: Qualcomm Crypto 5.3.3 device found @0x720000
797<6>[ 0.716764] qcrypto 720000.qcrypto: CE device = 0x0
798<6>[ 0.716764] IO base, CE = 0xc6340000
799<6>[ 0.716764] Consumer (IN) PIPE 4, Producer (OUT) PIPE 5
800<6>[ 0.716764] IO base BAM = 0x00000000
801<6>[ 0.716764] BAM IRQ 53
802<6>[ 0.716764] Engines Availability = 0x2010853
803<6>[ 0.717087] QCE50: qce_sps_init: Qualcomm MSM CE-BAM at 0x0000000000704000 irq 53
804<6>[ 0.719092] qcrypto 720000.qcrypto: qcrypto-ecb-aes
805<6>[ 0.719199] qcrypto 720000.qcrypto: qcrypto-cbc-aes
806<6>[ 0.719303] qcrypto 720000.qcrypto: qcrypto-ctr-aes
807<6>[ 0.719406] qcrypto 720000.qcrypto: qcrypto-ecb-des
808<6>[ 0.719511] qcrypto 720000.qcrypto: qcrypto-cbc-des
809<6>[ 0.719615] qcrypto 720000.qcrypto: qcrypto-ecb-3des
810<6>[ 0.719721] qcrypto 720000.qcrypto: qcrypto-cbc-3des
811<6>[ 0.719826] qcrypto 720000.qcrypto: qcrypto-xts-aes
812<6>[ 0.719930] qcrypto 720000.qcrypto: qcrypto-sha1
813<6>[ 0.720055] qcrypto 720000.qcrypto: qcrypto-sha256
814<6>[ 0.720171] qcrypto 720000.qcrypto: qcrypto-aead-hmac-sha1-cbc-aes
815<6>[ 0.720286] qcrypto 720000.qcrypto: qcrypto-aead-hmac-sha1-cbc-des
816<6>[ 0.720394] qcrypto 720000.qcrypto: qcrypto-aead-hmac-sha1-cbc-3des
817<6>[ 0.720502] qcrypto 720000.qcrypto: qcrypto-aead-hmac-sha256-cbc-aes
818<6>[ 0.720610] qcrypto 720000.qcrypto: qcrypto-aead-hmac-sha256-cbc-des
819<6>[ 0.720719] qcrypto 720000.qcrypto: qcrypto-aead-hmac-sha256-cbc-3des
820<6>[ 0.720826] qcrypto 720000.qcrypto: qcrypto-hmac-sha1
821<6>[ 0.720934] qcrypto 720000.qcrypto: qcrypto-hmac-sha256
822<6>[ 0.721041] qcrypto 720000.qcrypto: qcrypto-aes-ccm
823<6>[ 0.721148] qcrypto 720000.qcrypto: qcrypto-rfc4309-aes-ccm
824<3>[ 0.721823] qcom_ice_get_device_tree_data: No vdd-hba-supply regulator, assuming not needed
825<6>[ 0.721925] ICE IRQ = 55
826<6>[ 0.722705] SCSI Media Changer driver v0.25
827<6>[ 0.724988] tun: Universal TUN/TAP device driver, 1.6
828<6>[ 0.724993] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
829<6>[ 0.726631] PPP generic driver version 2.4.2
830<6>[ 0.726710] PPP BSD Compression module registered
831<6>[ 0.726718] PPP Deflate Compression module registered
832<6>[ 0.726733] PPP MPPE Compression module registered
833<6>[ 0.726744] NET: Registered protocol family 24
834<6>[ 0.727242] wcnss_wlan probed in built-in mode
835<6>[ 0.727798] usbcore: registered new interface driver asix
836<6>[ 0.727867] usbcore: registered new interface driver ax88179_178a
837<6>[ 0.727904] usbcore: registered new interface driver cdc_ether
838<6>[ 0.727940] usbcore: registered new interface driver net1080
839<6>[ 0.727977] usbcore: registered new interface driver cdc_subset
840<6>[ 0.728013] usbcore: registered new interface driver zaurus
841<6>[ 0.728180] usbcore: registered new interface driver cdc_ncm
842<6>[ 0.728572] msm_sharedmem: sharedmem_register_qmi: qmi init successful
843<3>[ 0.729713] scm_call failed: func id 0x2000c16, ret: -1, syscall returns: 0x0, 0x0, 0x0
844<6>[ 0.729718] hyp_assign_table: Failed to assign memory protection, ret = -5
845<3>[ 0.729725] msm_sharedmem: setup_shared_ram_perms: hyp_assign_phys failed IPA=0x0160xfdd00000 size=1572864 err=-5
846<6>[ 0.729808] msm_sharedmem: msm_sharedmem_probe: Device created for client 'rmtfs'
847<6>[ 0.730133] msm_otg 78db000.usb: msm_otg probe
848<6>[ 0.733400] msm_otg 78db000.usb: OTG regs = c5b9a000
849<6>[ 0.737731] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
850<6>[ 0.737740] ehci-msm: Qualcomm On-Chip EHCI Host Controller
851<3>[ 0.738060] Unable to get vbus_otg
852<3>[ 0.738067] msm_hsusb_host msm_hsusb_host: unable to register with transceiver
853<6>[ 0.738156] usbcore: registered new interface driver cdc_acm
854<6>[ 0.738160] cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters
855<6>[ 0.738205] usbcore: registered new interface driver usb-storage
856<6>[ 0.738238] usbcore: registered new interface driver ums-alauda
857<6>[ 0.738269] usbcore: registered new interface driver ums-cypress
858<6>[ 0.738299] usbcore: registered new interface driver ums-datafab
859<6>[ 0.738329] usbcore: registered new interface driver ums-freecom
860<6>[ 0.738359] usbcore: registered new interface driver ums-isd200
861<6>[ 0.738389] usbcore: registered new interface driver ums-jumpshot
862<6>[ 0.738418] usbcore: registered new interface driver ums-karma
863<6>[ 0.738452] usbcore: registered new interface driver ums-onetouch
864<6>[ 0.738483] usbcore: registered new interface driver ums-sddr09
865<6>[ 0.738514] usbcore: registered new interface driver ums-sddr55
866<6>[ 0.738544] usbcore: registered new interface driver ums-usbat
867<6>[ 0.738620] usbcore: registered new interface driver usbserial
868<6>[ 0.738657] usbcore: registered new interface driver usb_ehset_test
869<6>[ 0.739286] gbridge_init: gbridge_init successs.
870<6>[ 0.739739] u_lgeusb init
871<6>[ 0.740118] mousedev: PS/2 mouse device common for all mice
872<6>[ 0.740272] usbcore: registered new interface driver xpad
873<3>[ 0.740281] [TOUCH][F][I2C] touch_i2c_init()
874<3>[ 0.740285] [TOUCH][L][MISC] Touch Module Get. Module index = 0
875<3>[ 0.740454] [TOUCH][F][I2C] touch_i2c_probe()
876<6>[ 0.741107] qcom,qpnp-rtc qpnp-rtc-7: rtc core: registered qpnp_rtc as rtc0
877<6>[ 0.741260] i2c /dev entries driver
878<3>[ 0.745266] /soc/qcom,cam_smmu/msm_cam_smmu_cb1: could not get #iommu-cells for /soc/qcom,iommu@1e00000
879<3>[ 0.745512] /soc/qcom,cam_smmu/msm_cam_smmu_cb3: could not get #iommu-cells for /soc/qcom,iommu@1e00000
880<3>[ 0.745736] /soc/qcom,cam_smmu/msm_cam_smmu_cb4: could not get #iommu-cells for /soc/qcom,iommu@1e00000
881<3>[ 0.747870] msm_camera_get_dt_vreg_data:1198 number of entries is 0 or not present in dts
882<3>[ 0.749144] msm_camera_get_dt_vreg_data:1198 number of entries is 0 or not present in dts
883<3>[ 0.749879] msm_camera_get_dt_vreg_data:1198 number of entries is 0 or not present in dts
884<3>[ 0.752037] msm_camera_get_dt_vreg_data:1198 number of entries is 0 or not present in dts
885<3>[ 0.753380] msm_camera_get_dt_vreg_data:1198 number of entries is 0 or not present in dts
886<3>[ 0.754729] msm_camera_get_dt_vreg_data:1198 number of entries is 0 or not present in dts
887<5>[ 0.755231] msm_actuator_platform_probe:1951 No valid actuator GPIOs data
888<6>[ 0.762577] msm_cci_init:1434: hw_version = 0x10020004
889<3>[ 0.762608] qcom,slave-addr = 0xA1
890<3>[ 0.770476] qcom,slave-addr = 0xA3
891<3>[ 0.778327] qcom,slave-addr = 0xA5
892<3>[ 0.786215] qcom,slave-addr = 0xA7
893<3>[ 0.794154] qcom,slave-addr = 0xA9
894<3>[ 0.802122] qcom,slave-addr = 0xAB
895<3>[ 0.810084] qcom,slave-addr = 0xAD
896<3>[ 0.818010] qcom,slave-addr = 0xAF
897<5>[ 0.832747] msm_flash_get_dt_data:1035 No valid flash GPIOs data
898<3>[ 0.833926] adp1660 i2c_add_driver success
899<6>[ 0.840531] MSM-CPP cpp_init_hardware:1005 CPP HW Version: 0x40030002
900<3>[ 0.840542] MSM-CPP cpp_init_hardware:1023 stream_cnt:0
901<3>[ 0.842582] CAM-SOC msm_camera_get_reg_base:787 err: mem resource vfe_fuse not found
902<3>[ 0.842590] CAM-SOC msm_camera_get_res_size:830 err: mem resource vfe_fuse not found
903<3>[ 0.844291] CAM-SOC msm_camera_get_reg_base:787 err: mem resource vfe_fuse not found
904<3>[ 0.844299] CAM-SOC msm_camera_get_res_size:830 err: mem resource vfe_fuse not found
905<3>[ 0.854441] __msm_jpeg_init:1537] Jpeg Device id 0
906<3>[ 0.856256] lge_battery_id soc:lge,battery-id: LGE Battery ID Checker started
907<6>[ 0.856263] [FG_EST] battery num 6
908<6>[ 0.856267] [FG_EST] battery array 1 index = [0] id = [0]
909<6>[ 0.856271] [FG_EST] battery array 1 index = [1] id = [1]
910<6>[ 0.856275] [FG_EST] battery array 1 index = [2] id = [130]
911<6>[ 0.856278] [FG_EST] battery array 1 index = [3] id = [147]
912<6>[ 0.856282] [FG_EST] battery array 1 index = [4] id = [187]
913<6>[ 0.856285] [FG_EST] battery array 1 index = [5] id = [204]
914<6>[ 0.856291] [FG_EST] battery cell type [LGE_BL45B1F_LGC_3000mAh]
915<6>[ 0.856294] [FG_EST] battery cell type [LGE_BL45B1F_LGC_3000mAh]
916<6>[ 0.856297] [FG_EST] battery cell type [LGE_BL45B1F_Tocad_3000mAh]
917<6>[ 0.856301] [FG_EST] battery cell type [LGE_BL45B1F_LGC_3000mAh]
918<6>[ 0.856304] [FG_EST] battery cell type [LGE_BL45B1F_LGC_3000mAh]
919<6>[ 0.856307] [FG_EST] battery cell type [LGE_BL45B1F_Tocad_3000mAh]
920<6>[ 0.856318] Battery was read in sbl is = 204
921<6>[ 0.856743] FG: fg_check_ima_exception: Initial ima_err_sts=0 ima_exp_sts=0 ima_hw_sts=0
922<6>[ 0.856795] FG: fg_of_init: battery aging mode: 2
923<6>[ 0.856804] FG: fg_of_init: Using external sense
924<6>[ 0.856813] FG: fg_of_init: lge_rid_disable : 0
925<6>[ 0.856831] FG: fg_of_init: slope-limiter, temp: 100 coeffs: [14 6 14 6]
926<6>[ 0.856851] FG: fg_dischg_gain_dt_init: [FG_EST]:SOC:7 MedC_Gain:5 HighC_Gain: 5
927<6>[ 0.856856] FG: fg_dischg_gain_dt_init: [FG_EST]:SOC:15 MedC_Gain:4 HighC_Gain: 5
928<6>[ 0.856860] FG: fg_dischg_gain_dt_init: [FG_EST]:SOC:20 MedC_Gain:4 HighC_Gain: 4
929<6>[ 0.856873] FG: fg_of_init: batt-temp-low_limit: -600 batt-temp-high_limit: 1500
930<6>[ 0.856879] FG: fg_of_init: cc-soc-limit-pct: 120
931<6>[ 0.856894] FG: fg_of_init: slope-limiter, temp: 100 coeffs: [14 6 14 6]
932<6>[ 0.856914] FG: fg_dischg_gain_dt_init: [FG_EST]:SOC:7 MedC_Gain:5 HighC_Gain: 5
933<6>[ 0.856918] FG: fg_dischg_gain_dt_init: [FG_EST]:SOC:15 MedC_Gain:4 HighC_Gain: 5
934<6>[ 0.856923] FG: fg_dischg_gain_dt_init: [FG_EST]:SOC:20 MedC_Gain:4 HighC_Gain: 4
935<6>[ 0.856932] FG: fg_of_init: batt-temp-low_limit: -600 batt-temp-high_limit: 1500
936<6>[ 0.856937] FG: fg_of_init: cc-soc-limit-pct: 120
937<6>[ 0.856944] FG: fg_of_init: restore: 0 validate_by_ocv: 0 range_pct: 0
938<6>[ 0.857627] FG: fg_age_detection: battery age not init
939<6>[ 0.857961] FG: fg_age_detection: battery age not init
940<6>[ 0.858037] FG: fg_probe: rbias software control : 0
941<6>[ 0.858047] FG: update_iterm: current = -200, converted_raw = fae2, data = e2 fa
942<6>[ 0.858147] FG: fg_probe: FG Probe success - FG Revision DIG:3.1 ANA:1.2 PMIC subtype=17
943<6>[ 0.858392] FG: update_cutoff_voltage: voltage = 3200, converted_raw = 51eb, data = eb 51
944<6>[ 0.858512] FG: fg_age_detection: battery age not init
945<6>[ 0.858521] FG: fg_batt_print_work: [FG_INFO]:RS=0x0, BS=0, QS=0, SOC=50, Rem=0, Voltage=0mV,OCV=0mV, Current=0mA, Temp=20, Age=1, cycle=0
946<3>[ 0.859499] FG: fg_set_resume_soc: [FG_INFO]set recharging soc = 245
947<6>[ 0.860295] FG: set_prop_sense_type: [FG_OPTION]sensor type = 1
948<3>[ 0.860876] qpnp-smbcharger qpnp-smbcharger-17: node /soc/qcom,spmi@200f000/qcom,pmi8950@2/qcom,qpnp-smbcharger IO resource absent!
949<6>[ 0.861937] smbcharger_charger_otg: no parameters
950<3>[ 0.862377] SMBCHG: smbchg_hvdcp_enable_cb: smbchg_hvdcp_enable_cb enable 0
951<6>[ 0.865195] FG: fg_config_esr_extract: ESR extract already enabled
952<6>[ 0.865494] FG: fg_config_imptr_pulse: imptr_pulse_slow is disabled already
953<6>[ 0.867303] FG: fg_config_esr_extract: ESR extract already enabled
954<6>[ 0.867307] FG: fg_config_imptr_pulse: imptr_pulse_slow is disabled already
955<6>[ 0.867692] FG: fg_config_esr_extract: ESR extract already enabled
956<6>[ 0.867696] FG: fg_config_imptr_pulse: imptr_pulse_slow is disabled already
957<6>[ 0.868300] FG: fg_config_esr_extract: ESR extract already enabled
958<6>[ 0.868305] FG: fg_config_imptr_pulse: imptr_pulse_slow is disabled already
959<6>[ 0.868343] msm_otg 78db000.usb: ID status_w
960<6>[ 0.868896] FG: fg_config_esr_extract: ESR extract already enabled
961<6>[ 0.868900] FG: fg_config_imptr_pulse: imptr_pulse_slow is disabled already
962<6>[ 0.869798] FG: fg_common_hw_init: ESR extract is enabled
963<6>[ 0.870264] FG: fg_common_hw_init: imptr_pulse_slow is enabled
964<6>[ 0.870529] FG: fg_age_detection: battery age not init
965<6>[ 0.870677] FG: fg_common_hw_init: rslow_comp active is disabled
966<6>[ 0.871031] FG: fg_age_detection: battery age not init
967<6>[ 0.871136] FG: fg_common_hw_init: rslow_comp active is disabled
968<3>[ 0.873976] qpnp-smbcharger qpnp-smbcharger-17: node /soc/qcom,spmi@200f000/qcom,pmi8950@2/qcom,qpnp-smbcharger IO resource absent!
969<4>[ 0.874005] ------------[ cut here ]------------
970<4>[ 0.874017] WARNING: CPU: 2 PID: 1 at ../../../../../../kernel/lge/msm8937/drivers/base/core.c:548 device_create_file+0x68/0x90()
971<4>[ 0.874021] Attribute chgstep: write permission without 'store'
972<4>[ 0.874025] Modules linked in:
973<4>[ 0.874033] CPU: 2 PID: 1 Comm: swapper/0 Tainted: G W 3.18.71-perf-gc7ee433-dirty #1
974<4>[ 0.874051] [<c010df04>] (unwind_backtrace) from [<c010a95c>] (show_stack+0x10/0x14)
975<4>[ 0.874063] [<c010a95c>] (show_stack) from [<c0c374c4>] (dump_stack+0x84/0xa4)
976<4>[ 0.874075] [<c0c374c4>] (dump_stack) from [<c01256fc>] (warn_slowpath_common+0x64/0x88)
977<4>[ 0.874084] [<c01256fc>] (warn_slowpath_common) from [<c012574c>] (warn_slowpath_fmt+0x2c/0x3c)
978<4>[ 0.874094] [<c012574c>] (warn_slowpath_fmt) from [<c0533f10>] (device_create_file+0x68/0x90)
979<4>[ 0.874105] [<c0533f10>] (device_create_file) from [<c07dbca0>] (smbchg_probe+0x1fe8/0x2830)
980<4>[ 0.874118] [<c07dbca0>] (smbchg_probe) from [<c08ac800>] (spmi_drv_probe+0x10/0x14)
981<4>[ 0.874129] [<c08ac800>] (spmi_drv_probe) from [<c05378b0>] (driver_probe_device+0xb8/0x1f0)
982<4>[ 0.874138] [<c05378b0>] (driver_probe_device) from [<c0537a50>] (__driver_attach+0x68/0x8c)
983<4>[ 0.874146] [<c0537a50>] (__driver_attach) from [<c0536184>] (bus_for_each_dev+0x70/0x84)
984<4>[ 0.874155] [<c0536184>] (bus_for_each_dev) from [<c0537104>] (bus_add_driver+0xc8/0x1e0)
985<4>[ 0.874163] [<c0537104>] (bus_add_driver) from [<c05385bc>] (driver_register+0x9c/0xe0)
986<4>[ 0.874172] [<c05385bc>] (driver_register) from [<c0100a48>] (do_one_initcall+0x1a8/0x1e4)
987<4>[ 0.874182] [<c0100a48>] (do_one_initcall) from [<c1300df4>] (kernel_init_freeable+0x11c/0x1e0)
988<4>[ 0.874193] [<c1300df4>] (kernel_init_freeable) from [<c0c2f73c>] (kernel_init+0x8/0x10c)
989<4>[ 0.874203] [<c0c2f73c>] (kernel_init) from [<c01062f8>] (ret_from_fork+0x14/0x3c)
990<4>[ 0.874208] ---[ end trace cb88537fdc8fa202 ]---
991<6>[ 0.874825] qpnp-smbcharger qpnp-smbcharger-17: SMBCHG successfully probe Charger version=SCHG_LITE Revision DIG:0.0 ANA:0.1 batt=1 dc=0 usb=0
992<3>[ 0.875561] unable to find DT imem DLOAD mode node
993<3>[ 0.875901] unable to find DT imem EDLOAD mode node
994<4>[ 0.877111] thermal thermal_zone2: failed to read out thermal zone 2
995<3>[ 0.877185] SMBCHG: vadc_set_work: failed to initialize vadc
996<4>[ 0.877315] thermal thermal_zone3: failed to read out thermal zone 3
997<6>[ 0.877324] FG: fg_age_detection: battery age not init
998<6>[ 0.877424] FG: fg_config_esr_extract: ESR extract already enabled
999<4>[ 0.877531] thermal thermal_zone4: failed to read out thermal zone 4
1000<4>[ 0.877856] thermal thermal_zone5: failed to read out thermal zone 5
1001<6>[ 0.878043] FG: fg_config_imptr_pulse: imptr_pulse_slow is disabled
1002<3>[ 0.878435] qpnp_vadc_read: Error reading die_temp
1003<6>[ 0.899035] device-mapper: ioctl: 4.28.0-ioctl (2014-09-17) initialised: dm-devel@redhat.com
1004<6>[ 0.899144] device-mapper: req-crypt: dm-req-crypt successfully initalized.
1005<6>[ 0.899144]
1006<6>[ 0.900140] sdhci: Secure Digital Host Controller Interface driver
1007<6>[ 0.900144] sdhci: Copyright(c) Pierre Ossman
1008<6>[ 0.900151] sdhci-pltfm: SDHCI platform and OF driver helper
1009<6>[ 0.900276] lge_get_boot_mode : 0
1010<6>[ 0.900292] lge_get_boot_mode : 0
1011<6>[ 0.901191] qcom_ice_get_pdevice: found ice device e0dbf240
1012<6>[ 0.901199] qcom_ice_get_pdevice: matching platform device e1befa00
1013<6>[ 0.904635] qcom_ice 7803000.sdcc1ice: QC ICE 2.1.44 device found @0xc5f30000
1014<6>[ 0.905011] sdhci_msm 7824900.sdhci: No vmmc regulator found
1015<6>[ 0.905019] sdhci_msm 7824900.sdhci: No vqmmc regulator found
1016<6>[ 0.905384] mmc0: SDHCI controller on 7824900.sdhci [7824900.sdhci] using 32-bit ADMA in CMDQ mode
1017<4>[ 0.934287] sdhci_msm 7864900.sdhci: sdhci_msm_probe: ICE device is not enabled
1018<6>[ 0.951526] sdhci_msm 7864900.sdhci: No vmmc regulator found
1019<6>[ 0.951535] sdhci_msm 7864900.sdhci: No vqmmc regulator found
1020<6>[ 0.951900] mmc1: SDHCI controller on 7864900.sdhci [7864900.sdhci] using 32-bit ADMA in legacy mode
1021<6>[ 0.982307] hidraw: raw HID events driver (C) Jiri Kosina
1022<6>[ 0.982534] tz_log 8600720.tz-log: Hyp log service is not supported
1023<6>[ 0.982752] usbcore: registered new interface driver usbhid
1024<6>[ 0.982757] usbhid: USB HID core driver
1025<6>[ 0.983295] ashmem: initialized
1026<6>[ 0.983721] qpnp_coincell_charger_show_state: enabled=Y, voltage=3200 mV, resistance=2100 ohm
1027<6>[ 0.986748] bimc-bwmon 408000.qcom,cpu-bwmon: BW HWmon governor registered.
1028<3>[ 0.988564] devfreq soc:qcom,cpubw: Couldn't update frequency transition information.
1029<3>[ 0.988743] devfreq soc:qcom,mincpubw: Couldn't update frequency transition information.
1030<6>[ 0.989233] mmc0: Out-of-interrupt timeout is 100[ms]
1031<6>[ 0.989238] mmc0: BKOPS_EN equals 0x0
1032<6>[ 0.989244] mmc0: eMMC FW version: 0x08
1033<6>[ 0.989249] mmc0: cache barrier support 0 flush policy 0
1034<6>[ 0.991109] coresight-fuse a601c.fuse: Fuse initialized
1035<4>[ 0.991660] coresight-cti: probe of 6010000.cti failed with error -1
1036<4>[ 0.991686] coresight-cti: probe of 6011000.cti failed with error -1
1037<4>[ 0.991711] coresight-cti: probe of 6012000.cti failed with error -1
1038<4>[ 0.991735] coresight-cti: probe of 6013000.cti failed with error -1
1039<4>[ 0.991760] coresight-cti: probe of 6014000.cti failed with error -1
1040<4>[ 0.991785] coresight-cti: probe of 6015000.cti failed with error -1
1041<4>[ 0.991809] coresight-cti: probe of 6016000.cti failed with error -1
1042<4>[ 0.991834] coresight-cti: probe of 6017000.cti failed with error -1
1043<4>[ 0.991858] coresight-cti: probe of 6018000.cti failed with error -1
1044<4>[ 0.991883] coresight-cti: probe of 6019000.cti failed with error -1
1045<4>[ 0.991907] coresight-cti: probe of 601a000.cti failed with error -1
1046<4>[ 0.991932] coresight-cti: probe of 601b000.cti failed with error -1
1047<4>[ 0.991956] coresight-cti: probe of 601c000.cti failed with error -1
1048<4>[ 0.991981] coresight-cti: probe of 601d000.cti failed with error -1
1049<4>[ 0.992006] coresight-cti: probe of 601e000.cti failed with error -1
1050<4>[ 0.992030] coresight-cti: probe of 601f000.cti failed with error -1
1051<4>[ 0.992056] coresight-cti: probe of 61b8000.cti failed with error -1
1052<4>[ 0.992081] coresight-cti: probe of 61b9000.cti failed with error -1
1053<4>[ 0.992106] coresight-cti: probe of 61ba000.cti failed with error -1
1054<4>[ 0.992130] coresight-cti: probe of 61bb000.cti failed with error -1
1055<4>[ 0.992155] coresight-cti: probe of 6198000.cti failed with error -1
1056<4>[ 0.992180] coresight-cti: probe of 6199000.cti failed with error -1
1057<4>[ 0.992205] coresight-cti: probe of 619a000.cti failed with error -1
1058<4>[ 0.992230] coresight-cti: probe of 619b000.cti failed with error -1
1059<4>[ 0.992254] coresight-cti: probe of 6124000.cti failed with error -1
1060<4>[ 0.992279] coresight-cti: probe of 6139000.cti failed with error -1
1061<4>[ 0.992304] coresight-cti: probe of 6134000.cti failed with error -1
1062<4>[ 0.992328] coresight-cti: probe of 613c000.cti failed with error -1
1063<4>[ 0.992353] coresight-cti: probe of 610c000.cti failed with error -1
1064<6>[ 0.992795] coresight-csr 6001000.csr: CSR initialized
1065<4>[ 0.993233] coresight-tmc: probe of 6028000.tmc failed with error -1
1066<3>[ 0.993413] coresight-tmc 6027000.tmc: failed to get flush cti
1067<3>[ 0.993420] coresight-tmc 6027000.tmc: failed to get reset cti
1068<6>[ 0.993563] coresight-tmc 6027000.tmc: TMC initialized
1069<6>[ 0.995038] nidnt boot config: 0
1070<6>[ 0.995048] coresight-tpiu 6020000.tpiu: NIDnT hw support disabled
1071<6>[ 0.995055] coresight-tpiu 6020000.tpiu: NIDnT on SDCARD only mode
1072<6>[ 0.995150] coresight-tpiu 6020000.tpiu: TPIU initialized
1073<6>[ 0.997016] coresight-replicator 6026000.replicator: REPLICATOR initialized
1074<4>[ 0.997539] coresight-stm: probe of 6002000.stm failed with error -1
1075<6>[ 0.998071] coresight-hwevent 6101000.hwevent: Hardware Event driver initialized
1076<3>[ 0.998577] sensors-ssc soc:qcom,msm-ssc-sensors: msm_ssc_sensors_dt_parse: get qdsp timer cntpct hi offset fail
1077<6>[ 0.998586] sensors-ssc soc:qcom,msm-ssc-sensors: slpi_loader_init_sysfs: Could not parse dt
1078<6>[ 0.999044] usbcore: registered new interface driver snd-usb-audio
1079<6>[ 1.009477] mmc0: new HS400 MMC card at address 0001
1080<6>[ 1.009803] sdhci_msm_pm_qos_cpu_init (): voted for group #0 (mask=0xf) latency=2 (0xc43ea180)
1081<6>[ 1.009813] sdhci_msm_pm_qos_cpu_init (): voted for group #1 (mask=0xf0) latency=2 (0xc43ea188)
1082<6>[ 1.009963] mmcblk0: mmc0:0001 HAG2e 14.6 GiB
1083<6>[ 1.010117] mmcblk0rpmb: mmc0:0001 HAG2e partition 3 4.00 MiB
1084<6>[ 1.012687] mmcblk0: p1 p2 p3 p4 p5 p6 p7 p8 p9 p10 p11 p12 p13 p14 p15 p16 p17 p18 p19 p20 p21 p22 p23 p24 p25 p26 p27 p28 p29 p30 p31 p32 p33 p34 p35 p36 p37 p38 p39 p40 p41 p42 p43 p44 p45 p46 p47 p48 p49 p50 p51 p52 p53 p54 p55 p56 p57 p58 p59 p60 p61 p62 p63 p64 p65 p66
1085<6>[ 1.014235] msm-pcm-lpa soc:qcom,msm-pcm-lpa: msm_pcm_probe: dev name soc:qcom,msm-pcm-lpa
1086<6>[ 1.019051] u32 classifier
1087<6>[ 1.019057] Actions configured
1088<6>[ 1.019092] Netfilter messages via NETLINK v0.30.
1089<6>[ 1.019135] nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
1090<6>[ 1.019653] ctnetlink v0.93: registering with nfnetlink.
1091<6>[ 1.020566] xt_time: kernel timezone is -0000
1092<6>[ 1.020883] ip_tables: (C) 2000-2006 Netfilter Core Team
1093<6>[ 1.021064] arp_tables: (C) 2002 David S. Miller
1094<6>[ 1.021106] TCP: bic registered
1095<6>[ 1.021149] TCP: cubic registered
1096<6>[ 1.021156] Initializing XFRM netlink socket
1097<6>[ 1.021484] NET: Registered protocol family 10
1098<6>[ 1.022369] mip6: Mobile IPv6
1099<6>[ 1.022390] ip6_tables: (C) 2000-2006 Netfilter Core Team
1100<6>[ 1.022518] sit: IPv6 over IPv4 tunneling driver
1101<6>[ 1.022924] NET: Registered protocol family 17
1102<6>[ 1.022943] NET: Registered protocol family 15
1103<6>[ 1.022978] bridge: automatic filtering via arp/ip/ip6tables has been deprecated. Update your scripts to load br_netfilter if you need this.
1104<5>[ 1.022997] Bridge firewalling registered
1105<6>[ 1.023005] Ebtables v2.0 registered
1106<6>[ 1.023144] Bluetooth: e2a07ea8
1107<6>[ 1.023155] Bluetooth: e2a07ea8Bluetooth: e2a07eb8
1108<6>[ 1.023183] Bluetooth: e2a07e90Bluetooth: e2a07e90
1109<6>[ 1.023193] Bluetooth: e2a07e88Bluetooth: e2a07ec8
1110<6>[ 1.023206] Bluetooth: e2a07ec8<6>[ 1.023242] l2tp_core: L2TP core driver, V2.0
1111<6>[ 1.023257] l2tp_ppp: PPPoL2TP kernel driver, V2.0
1112<6>[ 1.023264] l2tp_ip: L2TP IP encapsulation support (L2TPv3)
1113<6>[ 1.023282] l2tp_netlink: L2TP netlink interface
1114<6>[ 1.023307] l2tp_eth: L2TP ethernet pseudowire support (L2TPv3)
1115<6>[ 1.023322] l2tp_debugfs: L2TP debugfs support
1116<6>[ 1.023330] l2tp_ip6: L2TP IP encapsulation support for IPv6 (L2TPv3)
1117<6>[ 1.023987] NET: Registered protocol family 27
1118<6>[ 1.027920] subsys-pil-tz c200000.qcom,lpass: for adsp segments only will be dumped.
1119<6>[ 1.029178] subsys-pil-tz a21b000.qcom,pronto: for wcnss segments only will be dumped.
1120<6>[ 1.031041] pil-q6v5-mss 4080000.qcom,mss: for modem segments only will be dumped.
1121<3>[ 1.070455] i2c-msm-v2 78b6000.i2c: NACK: slave not responding, ensure its powered: msgs(n:1 cur:0 tx) bc(rx:0 tx:2) mode:FIFO slv_addr:0x1d MSTR_STS:0x091343c8 OPER:0x00000090
1122<3>[ 1.070483] usb-type-c-pericom 2-001d: i2c write to [1d] failed -107
1123<3>[ 1.070490] usb-type-c-pericom 2-001d: i2c access failed
1124<6>[ 1.072257] msm_otg 78db000.usb: phy_reset: success
1125<3>[ 1.110286] i2c-msm-v2 78b6000.i2c: NACK: slave not responding, ensure its powered: msgs(n:1 cur:0 tx) bc(rx:0 tx:2) mode:FIFO slv_addr:0x1d MSTR_STS:0x0d1300c8 OPER:0x00000090
1126<3>[ 1.110310] usb-type-c-pericom 2-001d: i2c write to [1d] failed -107
1127<3>[ 1.110317] usb-type-c-pericom 2-001d: i2c access failed
1128<5>[ 1.112908] Registering SWP/SWPB emulation handler
1129<6>[ 1.112936] Creating CPU group 0
1130<6>[ 1.112940] Init CPU0 state
1131<6>[ 1.112943] Init CPU1 state
1132<6>[ 1.112946] Init CPU2 state
1133<6>[ 1.112948] Init CPU3 state
1134<6>[ 1.113082] Creating CPU group 4
1135<6>[ 1.113086] Init CPU4 state
1136<6>[ 1.113089] Init CPU5 state
1137<6>[ 1.113092] Init CPU6 state
1138<6>[ 1.113095] Init CPU7 state
1139<6>[ 1.113463] registered taskstats version 1
1140<5>[ 1.114745] Key type encrypted registered
1141<6>[ 1.119267] power_sysfs_parse_dt : Total sysfs node is 54
1142<6>[ 1.120985] power_sysfs_probe : Success Power sysfs Init
1143<6>[ 1.121476] monitor-thermal soc:lge,monitor-thermal: LGE monitor thermal Initialized
1144<6>[ 1.121999] fastrpc soc:qcom,adsprpc-mem: for adsp_rh segments only will be dumped.
1145<3>[ 1.160379] i2c-msm-v2 78b6000.i2c: NACK: slave not responding, ensure its powered: msgs(n:1 cur:0 tx) bc(rx:0 tx:2) mode:FIFO slv_addr:0x1d MSTR_STS:0x091343c8 OPER:0x00000090
1146<3>[ 1.160405] usb-type-c-pericom 2-001d: i2c write to [1d] failed -107
1147<3>[ 1.160412] usb-type-c-pericom 2-001d: i2c access failed
1148<6>[ 1.161151] RNDIS_IPA module is loaded.
1149<6>[ 1.161459] usb_gadget_probe_driver
1150<6>[ 1.161464] gadget name udc->gadget->name ci13xxx_msm
1151<6>[ 1.161467]
1152<6>[ 1.161467] ********************************************
1153<6>[ 1.161470]
1154<6>[ 1.161470] No of UDCs: 1
1155<6>[ 1.161475] driver->function: android_usb
1156<6>[ 1.161476]
1157<6>[ 1.161476] ********************************************
1158<6>[ 1.161481] udc->gadget->usb_core_id : 0
1159<6>[ 1.161483]
1160<6>[ 1.161483] driver->usb_core_id: 0
1161<6>[ 1.161715] file system registered
1162<6>[ 1.161763] mbim_init: initialize 1 instances
1163<6>[ 1.161815] mbim_init: Initialized 1 ports
1164<6>[ 1.163208] rndis_qc_init: initialize rndis QC instance
1165<6>[ 1.163466] Number of LUNs=8
1166<6>[ 1.163472] Mass Storage Function, version: 2009/09/11
1167<6>[ 1.163478] LUN: removable file: (no medium)
1168<6>[ 1.163489] Number of LUNs=1
1169<6>[ 1.163530] LUN: removable file: (no medium)
1170<6>[ 1.163534] Number of LUNs=1
1171<6>[ 1.163809] android_usb gadget: android_usb ready
1172<6>[ 1.163817] msm_hsusb msm_hsusb: [ci13xxx_start] hw_ep_max = 32
1173<6>[ 1.163830] msm_hsusb msm_hsusb: CI13XXX_CONTROLLER_UDC_STARTED_EVENT received
1174<6>[ 1.163836] udc->gadget->name: ci13xxx_msm
1175<6>[ 1.165519] hall_ic switch registration succeeded
1176<6>[ 1.165638] stylus_pen switch registration succeeded<6>[ 1.165916] input: gpio-keys as /devices/soc/soc:gpio_keys/input/input1
1177<7>[ 1.166195] 7: [DEBUG] ../../../../../../kernel/lge/msm8937/drivers/input/fingerprint/ix_btp_tee.c:426 ix_init
1178<3>[ 1.166198] [TOUCH][F][COMMON] async_touch_init()
1179<3>[ 1.166203] [TOUCH][L][MISC] Touch Module Get. Module index = 0
1180<3>[ 1.166207] [TOUCH][F][MISC] TouchInitializeGpio()
1181<7>[ 1.166414] 7: [DEBUG] ../../../../../../kernel/lge/msm8937/drivers/input/fingerprint/ix_btp_tee.c:454 ix_probe
1182<4>[ 1.166418] CONFIG_COMPAT enable
1183<7>[ 1.166425] 7: [DEBUG] ../../../../../../kernel/lge/msm8937/drivers/input/fingerprint/ix_btp_tee.c:975 ix_get_of_pdata
1184<6>[ 1.166437] 6: [INFO] irq : 62 reset : 47
1185<7>[ 1.166531] power on!!
1186<7>[ 1.166536] 7: [DEBUG] ../../../../../../kernel/lge/msm8937/drivers/input/fingerprint/ix_btp_tee.c:360 ix_regulator_set ix_regulator_set(): power on
1187<3>[ 1.166716] [TOUCH][F][COMMON] touch_probe()
1188<3>[ 1.166724] [TOUCH][L][COMMON] STATE = BOOT
1189<3>[ 1.166729] [TOUCH][L][CONFIG] ======== Model Configuration ( Begin ) ========
1190<3>[ 1.166734] [TOUCH][L][CONFIG] button_support=0
1191<3>[ 1.166738] [TOUCH][L][CONFIG] number_of_button=0
1192<3>[ 1.166742] [TOUCH][L][CONFIG] button_name[0]=0
1193<3>[ 1.166746] [TOUCH][L][CONFIG] button_name[1]=0
1194<3>[ 1.166750] [TOUCH][L][CONFIG] button_name[2]=0
1195<3>[ 1.166754] [TOUCH][L][CONFIG] button_name[3]=0
1196<3>[ 1.166758] [TOUCH][L][CONFIG] max_x=720
1197<3>[ 1.166762] [TOUCH][L][CONFIG] max_y=1280
1198<3>[ 1.166766] [TOUCH][L][CONFIG] max_pressure=255
1199<3>[ 1.166770] [TOUCH][L][CONFIG] max_width=15
1200<3>[ 1.166774] [TOUCH][L][CONFIG] max_orientation=1
1201<3>[ 1.166778] [TOUCH][L][CONFIG] max_id=10
1202<3>[ 1.166782] [TOUCH][L][CONFIG] protocol_type=MT_PROTOCOL_B
1203<3>[ 1.166786] [TOUCH][L][CONFIG] ======== Model Configuration ( End ) ========
1204<3>[ 1.166790] [TOUCH][F][COMMON] register_input_dev()
1205<6>[ 1.166904] btp spi6.0: [INFO] regulator value : 1800000
1206<6>[ 1.166954] input: touch_dev as /devices/virtual/input/input2
1207<3>[ 1.167029] [TOUCH][F][COMMON] sysfs_register()
1208<3>[ 1.167231] [TOUCH][F][MIT300] MIT300_Initialize()
1209<3>[ 1.167237] [TOUCH][L][MIT300] factory boot check : 0
1210<3>[ 1.167242] [TOUCH][F][MIT300] MIT300_ReadIcFirmwareInfo()
1211<3>[ 1.167247] [TOUCH][L][MIT300] ==============Read Firmware Info===========
1212<3>[ 1.167457] i2c-msm-v2 78b7000.i2c: msm_bus_scale_register_client(mstr-id:86):0x1a (ok)
1213<3>[ 1.168096] [TOUCH][L][MIT300] F/W Product : PH1_C7
1214<3>[ 1.168380] [TOUCH][L][MIT300] IC Name : T3H0
1215<3>[ 1.168618] [TOUCH][L][MIT300] IC F/W Version = v2.09 ( Official Release )
1216<7>[ 1.168924] 7: [DEBUG] ../../../../../../kernel/lge/msm8937/drivers/input/fingerprint/ix_btp_tee.c:842 ix_get_hw_id
1217<3>[ 1.168974] [TOUCH][L][MIT300] max_x[720] max_y[1280]
1218<3>[ 1.168980] [TOUCH][L][MIT300] col_num[18] row_num[32] key_num[0]
1219<3>[ 1.169336] [TOUCH][L][MIT300] event_format[1] event_size[8]
1220<3>[ 1.169340] [TOUCH][L][MIT300] ===========================================
1221<3>[ 1.169346] [TOUCH][F][MIT300] MIT300_GetBinFirmwareInfo()
1222<3>[ 1.169350] [TOUCH][L][MIT300] Firmware filename = melfas/mit300/ph2/melfas_mip4_cut7.bin
1223<3>[ 1.169361] [TOUCH][L][MIT300] BIN F/W Version = v2.09 ( Official Release )
1224<3>[ 1.169366] [TOUCH][F][MISC] TouchRegisterIrq()
1225<6>[ 1.169388] btp spi6.0: [INFO] ***************************************************
1226<6>[ 1.169395] btp spi6.0: [INFO] * Chip ID[0x52] * Revision Number[0x10] * Count[1]
1227<6>[ 1.169400] btp spi6.0: [INFO] ***************************************************
1228<3>[ 1.169562] [TOUCH][L][MISC] Interrupt Disabled
1229<3>[ 1.169567] [TOUCH][L][COMMON] STATE = NORMAL
1230<3>[ 1.169575] [TOUCH][L][MISC] Interrupt Enabled
1231<3>[ 1.169615] [TOUCH][L][COMMON] Finish async_touch_init
1232<3>[ 1.169625] [TOUCH][L][MISC] Interrupt Disabled
1233<3>[ 1.169630] [TOUCH][L][COMMON] STATE = NORMAL
1234<3>[ 1.169637] [TOUCH][L][MISC] Interrupt Enabled
1235<6>[ 1.170019] btp spi6.0: [INFO] interrupt wait count [1]
1236<7>[ 1.170024] 7: [DEBUG] ../../../../../../kernel/lge/msm8937/drivers/input/fingerprint/ix_btp_tee.c:791 ix_reset
1237<6>[ 1.170066] Cable type is already defined
1238<7>[ 1.170152] 7: [DEBUG] ../../../../../../kernel/lge/msm8937/drivers/input/fingerprint/ix_btp_tee.c:817 ix_init_param
1239<6>[ 1.179343] btp spi6.0: [INFO] Interrupt test OK
1240<7>[ 1.179348] 7: [DEBUG] ../../../../../../kernel/lge/msm8937/drivers/input/fingerprint/ix_btp_tee.c:791 ix_reset
1241<7>[ 1.179444] 7: [DEBUG] ../../../../../../kernel/lge/msm8937/drivers/input/fingerprint/ix_btp_tee.c:817 ix_init_param
1242<3>[ 1.182283] ipa_get_transport_type:2302 IPA HW is not supported
1243<6>[ 1.183975] msm_otg 78db000.usb: USB in low power mode
1244<6>[ 1.188738] input: fingerprint as /devices/virtual/input/lge_fingerprint
1245<7>[ 1.188818] 7: [DEBUG] ../../../../../../kernel/lge/msm8937/drivers/input/fingerprint/ix_btp_tee.c:432 ix_init ok
1246<6>[ 1.188876] qcom,qpnp-rtc qpnp-rtc-7: setting system clock to 1970-01-01 02:38:53 UTC (9533)
1247<6>[ 1.191245] [BOOT_CAUSE] 160, warm_reset = 0
1248<6>[ 1.191249] [SMPL_CNT] ===> not smpl boot!!!!!
1249<3>[ 1.192892] gpio_keys_gpio_report_event: code(222) state(0)
1250<3>[ 1.192900] gpio_keys_gpio_report_event: code(222) state(0)
1251<6>[ 1.192904] stylus_pen state = 0
1252<3>[ 1.192919] gpio_keys_gpio_report_event: code(115) state(0)
1253<3>[ 1.193126] parse_cpu_levels: idx 1 900
1254<3>[ 1.193250] calculate_residency: residency < 0 for LPM
1255<3>[ 1.193254] parse_cpu_levels: idx 1 400
1256<3>[ 1.196357] qcom,qpnp-flash-led qpnp-flash-led-24: Unable to acquire pinctrl
1257<3>[ 1.200274] i2c-msm-v2 78b6000.i2c: NACK: slave not responding, ensure its powered: msgs(n:1 cur:0 tx) bc(rx:0 tx:2) mode:FIFO slv_addr:0x1d MSTR_STS:0x0d1300c8 OPER:0x00000090
1258<3>[ 1.200298] usb-type-c-pericom 2-001d: i2c write to [1d] failed -107
1259<3>[ 1.200305] usb-type-c-pericom 2-001d: i2c access failed
1260<6>[ 1.200433] qcom,cc-debug-8952 1874000.qcom,cc-debug: Registered Debug Mux successfully
1261<6>[ 1.206003] msm8952-asoc-wcd c051000.sound: default codec configured
1262<3>[ 1.210449] msm8952-asoc-wcd c051000.sound: ASoC: platform (null) not registered
1263<3>[ 1.210492] msm8952-asoc-wcd c051000.sound: snd_soc_register_card failed (-517)
1264<6>[ 1.211162] mem_acc_corner: disabling
1265<6>[ 1.211197] adv_vreg: disabling
1266<6>[ 1.211243] clock_late_init: Removing enables held for handed-off clocks
1267<6>[ 1.214125] ALSA device list:
1268<6>[ 1.214129] No soundcards found.
1269<3>[ 1.214205] Warning: unable to open an initial console.
1270<6>[ 1.228339] Freeing unused kernel memory: 476K
1271<13>[ 1.229589] init: init started!
1272<7>[ 1.233076] SELinux: 2048 avtab hash slots, 5208 rules.
1273<6>[ 1.233270] SELinux: Android master kernel running Android M policy in compatibility mode.
1274<7>[ 1.234981] SELinux: 2048 avtab hash slots, 5208 rules.
1275<7>[ 1.234992] SELinux: 1 users, 2 roles, 556 types, 0 bools, 1 sens, 1024 cats
1276<7>[ 1.234998] SELinux: 87 classes, 5208 rules
1277<6>[ 1.235804] SELinux: Permission module_load in class system not defined in policy.
1278<6>[ 1.236008] SELinux: Class netlink_iscsi_socket not defined in policy.
1279<6>[ 1.236021] SELinux: Class netlink_fib_lookup_socket not defined in policy.
1280<6>[ 1.236026] SELinux: Class netlink_connector_socket not defined in policy.
1281<6>[ 1.236029] SELinux: Class netlink_netfilter_socket not defined in policy.
1282<6>[ 1.236048] SELinux: Class netlink_generic_socket not defined in policy.
1283<6>[ 1.236052] SELinux: Class netlink_scsitransport_socket not defined in policy.
1284<6>[ 1.236056] SELinux: Class netlink_rdma_socket not defined in policy.
1285<6>[ 1.236060] SELinux: Class netlink_crypto_socket not defined in policy.
1286<6>[ 1.236090] SELinux: Permission audit_read in class capability2 not defined in policy.
1287<6>[ 1.236106] SELinux: Class can_socket not defined in policy.
1288<6>[ 1.236110] SELinux: the above unknown classes and permissions will be denied
1289<7>[ 1.236123] SELinux: Completing initialization.
1290<7>[ 1.236126] SELinux: Setting up existing superblocks.
1291<7>[ 1.236139] SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
1292<7>[ 1.236157] SELinux: initialized (dev rootfs, type rootfs), uses genfs_contexts
1293<7>[ 1.236564] SELinux: initialized (dev bdev, type bdev), not configured for labeling
1294<7>[ 1.236577] SELinux: initialized (dev proc, type proc), uses genfs_contexts
1295<7>[ 1.236598] SELinux: initialized (dev debugfs, type debugfs), uses genfs_contexts
1296<3>[ 1.240427] i2c-msm-v2 78b6000.i2c: NACK: slave not responding, ensure its powered: msgs(n:1 cur:0 tx) bc(rx:0 tx:2) mode:FIFO slv_addr:0x1d MSTR_STS:0x0d1300c8 OPER:0x00000090
1297<3>[ 1.240463] usb-type-c-pericom 2-001d: i2c write to [1d] failed -107
1298<3>[ 1.240470] usb-type-c-pericom 2-001d: i2c access failed
1299<7>[ 1.246410] SELinux: initialized (dev sockfs, type sockfs), uses task SIDs
1300<7>[ 1.246423] SELinux: initialized (dev tracefs, type tracefs), not configured for labeling
1301<7>[ 1.262766] SELinux: initialized (dev pipefs, type pipefs), uses task SIDs
1302<7>[ 1.262778] SELinux: initialized (dev anon_inodefs, type anon_inodefs), not configured for labeling
1303<7>[ 1.262786] SELinux: initialized (dev aio, type aio), not configured for labeling
1304<7>[ 1.262796] SELinux: initialized (dev devpts, type devpts), uses transition SIDs
1305<7>[ 1.262816] SELinux: initialized (dev configfs, type configfs), uses genfs_contexts
1306<7>[ 1.262829] SELinux: initialized (dev selinuxfs, type selinuxfs), uses genfs_contexts
1307<7>[ 1.262884] SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
1308<7>[ 1.262906] SELinux: initialized (dev sysfs, type sysfs), uses genfs_contexts
1309<5>[ 1.313768] audit: type=1403 audit(9533.619:2): policy loaded auid=4294967295 ses=4294967295
1310<13>[ 1.314185] init: (Initializing SELinux non-enforcing took 0.08s.)
1311<13>[ 1.319561] init: init second stage started!
1312<11>[ 1.380949] init: waitpid failed: No child processes
1313<13>[ 1.381580] init: (Loading properties from /default.prop took 0.00s.)
1314<11>[ 1.381961] init: /init.rc: 13: invalid command 'setcon'
1315<11>[ 1.382024] init: /init.rc: 63: invalid command 'load_all_props'
1316<11>[ 1.382116] init: could not import file '/init.recovery.logd.rc' from '/init.rc'
1317<13>[ 1.382204] init: (Parsing /init.recovery.usb.rc took 0.00s.)
1318<13>[ 1.382249] init: (Parsing /init.recovery.service.rc took 0.00s.)
1319<11>[ 1.382275] init: could not import file '/init.recovery.vold_decrypt.rc' from '/init.rc'
1320<11>[ 1.382301] init: could not import file '/init.recovery.ph2n.rc' from '/init.rc'
1321<13>[ 1.382314] init: (Parsing /init.rc took 0.00s.)
1322<5>[ 1.382408] audit: type=1400 audit(9533.689:3): avc: denied { setcheckreqprot } for pid=1 comm="init" scontext=u:r:init:s0 tcontext=u:object_r:kernel:s0 tclass=security permissive=1
1323<11>[ 1.382456] init: SELinux: Could not get canonical path /postinstall restorecon: No such file or directory.
1324<13>[ 1.382495] init: Starting service 'ueventd'...
1325<13>[ 1.382764] init: Starting service 'healthd'...
1326<13>[ 1.382952] init: Waiting for /dev/.coldboot_done...
1327<13>[ 1.385238] ueventd: ueventd started!
1328<5>[ 1.385333] audit: type=1400 audit(9533.689:4): avc: denied { write } for pid=376 comm="healthd" name="/" dev="tmpfs" ino=12733 scontext=u:r:healthd:s0 tcontext=u:object_r:device:s0 tclass=dir permissive=1
1329<5>[ 1.385360] audit: type=1400 audit(9533.689:5): avc: denied { mknod } for pid=376 comm="healthd" capability=27 scontext=u:r:healthd:s0 tcontext=u:r:healthd:s0 tclass=capability permissive=1
1330<5>[ 1.385388] audit: type=1400 audit(9533.689:6): avc: denied { add_name } for pid=376 comm="healthd" name="__kmsg__" scontext=u:r:healthd:s0 tcontext=u:object_r:device:s0 tclass=dir permissive=1
1331<5>[ 1.385430] audit: type=1400 audit(9533.689:7): avc: denied { create } for pid=376 comm="healthd" name="__kmsg__" scontext=u:r:healthd:s0 tcontext=u:object_r:device:s0 tclass=chr_file permissive=1
1332<5>[ 1.385483] audit: type=1400 audit(9533.689:8): avc: denied { write } for pid=376 comm="healthd" name="__kmsg__" dev="tmpfs" ino=5188 scontext=u:r:healthd:s0 tcontext=u:object_r:device:s0 tclass=chr_file permissive=1
1333<5>[ 1.385512] audit: type=1400 audit(9533.689:9): avc: denied { open } for pid=376 comm="healthd" path="/dev/__kmsg__" dev="tmpfs" ino=5188 scontext=u:r:healthd:s0 tcontext=u:object_r:device:s0 tclass=chr_file permissive=1
1334<5>[ 1.385546] audit: type=1400 audit(9533.689:10): avc: denied { remove_name } for pid=376 comm="healthd" name="__kmsg__" dev="tmpfs" ino=5188 scontext=u:r:healthd:s0 tcontext=u:object_r:device:s0 tclass=dir permissive=1
1335<11>[ 1.385576] charger: void healthd_board_init(healthd_config*): Unable to load battery scale image
1336<6>[ 1.525729] FG: fg_age_detection: battery age not init
1337<6>[ 1.533868] FG: fg_age_detection: battery age not init
1338<3>[ 1.730079] msm_otg 78db000.usb: unable to get qpnp adc for otg
1339<13>[ 1.763516] ueventd: Coldboot took 0.37s.
1340<13>[ 1.766150] init: Waiting for /dev/.coldboot_done took 0.38s.
1341<7>[ 1.768193] SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
1342<7>[ 1.769679] SELinux: initialized (dev pstore, type pstore), uses genfs_contexts
1343<7>[ 1.770560] SELinux: initialized (dev functionfs, type functionfs), uses genfs_contexts
1344<6>[ 1.770655] android_usb android0: gadget enable(0)
1345<3>[ 1.770667] enable_store: android_usb: already disabled
1346<6>[ 1.770844] android_usb android0: LGE-USB request function list: adb
1347<13>[ 1.771043] init: (Loading properties from /system/build.prop took 0.00s.)
1348<13>[ 1.771074] init: (Loading properties from /vendor/build.prop took 0.00s.)
1349<13>[ 1.771103] init: (Loading properties from /factory/factory.prop took 0.00s.)
1350<11>[ 1.771148] fs_mgr: Cannot open file /fstab.ph2n
1351<11>[ 1.771164] init: unable to read fstab /fstab.ph2n: No such file or directory
1352<13>[ 1.771207] init: (Loading properties from /data/local.prop took 0.00s.)
1353<11>[ 1.771235] init: Unable to open persistent property directory "/data/property": No such file or directory
1354<13>[ 1.771776] init: Starting service 'set_permissive'...
1355<13>[ 1.772073] init: Starting service 'recovery'...
1356<6>[ 1.772401] android_usb android0: gadget enable(0)
1357<13>[ 1.772456] init: Starting service 'adbd'...
1358<6>[ 1.772727] android_usb android0: gadget enable(1)
1359<6>[ 1.772739] ffs_function_enable: ffs_function_enable: config->opened(0)
1360<6>[ 1.772746] android_disable: android_disable: checked disable_depth(1)
1361<6>[ 1.772754] android_enable: android_enable: checked disable_depth(2)
1362<6>[ 1.775886] read descriptors
1363<6>[ 1.775899] read strings
1364<6>[ 1.775918] functionfs_ready_callback: functionfs_ready_callback: config->enabled(1), dev(e08c0000)
1365<6>[ 1.775925] android_enable: android_enable: checked disable_depth(1)
1366<13>[ 1.795384] init: Service 'set_permissive' (pid 377) exited with status 0
1367<6>[ 1.815323] mdss_fb_set_bl_brightness: value=255 -> bl_lvl=4095
1368<11>[ 1.815935] init: avc: denied { set } for property=twrp.crash_counter scontext=u:r:recovery:s0 tcontext=u:object_r:default_prop:s0 tclass=property_service
1369<6>[ 1.816856] mdss_fb_set_bl_brightness: value=255 -> bl_lvl=4095
1370<6>[ 1.817399] mdss_fb_blank_sub: mdss_fb_open+0x11c/0x1a4 mode:0
1371<6>[ 1.817591] mdss_fb_blank_sub: -
1372<4>[ 1.819352] ------------[ cut here ]------------
1373<4>[ 1.819365] WARNING: CPU: 0 PID: 378 at ../../../../../../kernel/lge/msm8937/mm/vmalloc.c:128 vmap_page_range_noflush+0x158/0x18c()
1374<4>[ 1.819369] Modules linked in:
1375<4>[ 1.819378] CPU: 0 PID: 378 Comm: recovery Tainted: G W 3.18.71-perf-gc7ee433-dirty #1
1376<4>[ 1.819397] [<c010df04>] (unwind_backtrace) from [<c010a95c>] (show_stack+0x10/0x14)
1377<4>[ 1.819409] [<c010a95c>] (show_stack) from [<c0c374c4>] (dump_stack+0x84/0xa4)
1378<4>[ 1.819420] [<c0c374c4>] (dump_stack) from [<c01256fc>] (warn_slowpath_common+0x64/0x88)
1379<4>[ 1.819430] [<c01256fc>] (warn_slowpath_common) from [<c01257b0>] (warn_slowpath_null+0x18/0x20)
1380<4>[ 1.819439] [<c01257b0>] (warn_slowpath_null) from [<c0209e00>] (vmap_page_range_noflush+0x158/0x18c)
1381<4>[ 1.819449] [<c0209e00>] (vmap_page_range_noflush) from [<c020a3c0>] (map_vm_area+0x34/0x60)
1382<4>[ 1.819456] [<c020a3c0>] (map_vm_area) from [<c020a9cc>] (vmap+0x44/0x64)
1383<4>[ 1.819467] [<c020a9cc>] (vmap) from [<c088fa98>] (msm_ion_heap_pages_zero+0x80/0xd4)
1384<4>[ 1.819478] [<c088fa98>] (msm_ion_heap_pages_zero) from [<c088ba84>] (ion_system_heap_allocate+0x2d4/0x52c)
1385<4>[ 1.819488] [<c088ba84>] (ion_system_heap_allocate) from [<c08887a8>] (__ion_alloc+0x16c/0x928)
1386<4>[ 1.819497] [<c08887a8>] (__ion_alloc) from [<c0888f7c>] (ion_alloc+0x18/0x20)
1387<4>[ 1.819509] [<c0888f7c>] (ion_alloc) from [<c0435f00>] (mdss_fb_fbmem_ion_mmap+0x100/0x41c)
1388<4>[ 1.819520] [<c0435f00>] (mdss_fb_fbmem_ion_mmap) from [<c0436270>] (mdss_fb_mmap+0x54/0xa0)
1389<4>[ 1.819531] [<c0436270>] (mdss_fb_mmap) from [<c03badcc>] (fb_mmap+0x44/0xe4)
1390<4>[ 1.819541] [<c03badcc>] (fb_mmap) from [<c0204e24>] (mmap_region+0x2b8/0x52c)
1391<4>[ 1.819549] [<c0204e24>] (mmap_region) from [<c0205384>] (do_mmap_pgoff+0x2ec/0x338)
1392<4>[ 1.819559] [<c0205384>] (do_mmap_pgoff) from [<c01f05cc>] (vm_mmap_pgoff+0x78/0xa8)
1393<4>[ 1.819568] [<c01f05cc>] (vm_mmap_pgoff) from [<c0203c3c>] (SyS_mmap_pgoff+0x94/0xd8)
1394<4>[ 1.819577] [<c0203c3c>] (SyS_mmap_pgoff) from [<c0106240>] (ret_fast_syscall+0x0/0x44)
1395<4>[ 1.819582] ---[ end trace cb88537fdc8fa204 ]---
1396<3>[ 1.826800] [TOUCH][D][COMMON] [IN] LCD Sleep
1397<3>[ 1.826807] [TOUCH][E][COMMON] DecideNextDriverState() line=748 : Invalid Mode Setting ( mode = -1 )
1398<3>[ 1.826809] [TOUCH][F][MIT300] MIT300_SetLpwgMode()
1399<3>[ 1.826810] [TOUCH][F][MIT300] lpwg_control()
1400<3>[ 1.828004] [TOUCH][L][MIT300] SET Active Area X1 = 60, Y1 = 60, X2 = 660, Y2 = 1220
1401<3>[ 1.829210] [TOUCH][L][MISC] Interrupt Enabled
1402<3>[ 1.829212] [TOUCH][L][MIT300] device was set to KNOCK_ON_CODE
1403<3>[ 1.829214] [TOUCH][L][COMMON] STATE = KNOCK_ON_CODE
1404<6>[ 1.829223] mdss_fb_blank_sub: mdss_fb_blank+0xd8/0xf4 mode:4
1405<6>[ 1.829337] mdss_fb_blank_sub: -
1406<6>[ 1.829364] mdss_fb_blank_sub: mdss_fb_blank+0xd8/0xf4 mode:0
1407<6>[ 1.829496] mdss_fb_blank_sub: -
1408<3>[ 1.829498] [TOUCH][D][COMMON] [OUT] LCD Sleep
1409<3>[ 1.829499] [TOUCH][F][MIT300] MIT300_SetLpwgMode()
1410<3>[ 1.829500] [TOUCH][F][MIT300] lpwg_control()
1411<3>[ 1.829502] [TOUCH][L][MIT300] device was set to NORMAL
1412<3>[ 1.829503] [TOUCH][L][COMMON] STATE = NORMAL
1413<3>[ 1.829535] [TOUCH][L][MISC] Interrupt Disabled
1414<3>[ 1.829544] [TOUCH][L][COMMON] STATE = NORMAL
1415<3>[ 1.829563] [TOUCH][L][MISC] Interrupt Enabled
1416<3>[ 1.858259] [TOUCH][D][COMMON] [IN] LCD Sleep
1417<3>[ 1.858263] [TOUCH][E][COMMON] DecideNextDriverState() line=748 : Invalid Mode Setting ( mode = -1 )
1418<3>[ 1.858265] [TOUCH][F][MIT300] MIT300_SetLpwgMode()
1419<3>[ 1.858266] [TOUCH][F][MIT300] lpwg_control()
1420<3>[ 1.858725] [TOUCH][L][MIT300] SET Active Area X1 = 60, Y1 = 60, X2 = 660, Y2 = 1220
1421<3>[ 1.859964] [TOUCH][L][MISC] Interrupt Enabled
1422<3>[ 1.859966] [TOUCH][L][MIT300] device was set to KNOCK_ON_CODE
1423<3>[ 1.859969] [TOUCH][L][COMMON] STATE = KNOCK_ON_CODE
1424<6>[ 1.859982] mdss_fb_blank_sub: mdss_fb_blank+0xd8/0xf4 mode:4
1425<6>[ 1.875572] lge_set_display_power_ctrl: display_power_ctrl [0]
1426<6>[ 1.875582] mdss_dsi_panel_off: ctrl=e0cf3010 ndx=0
1427<6>[ 2.352709] mdss_dsi_panel_off:-
1428<6>[ 2.390190] FG: fg_backup_sram_registers: Backing SRAM registers
1429<6>[ 2.397505] mdss_dsi_panel_reset: + enable = 0 (override: ph2n_tmo_us)
1430<6>[ 2.397506] mdss_dsi_panel_reset: -
1431<6>[ 2.398184] FG: update_sram_data: last_soc: 155 last_cc_soc: 163166649
1432<6>[ 2.398233] FG: update_sram_data: soc:[50], soc_raw[6245], voltage:[3751503], ocv:[3940406], current:[907740], batt_temp:[200], charge_raw [0 / 0]
1433<6>[ 2.399047] FG: update_temp_data: batt temp was changed !! 0 => 257
1434<6>[ 2.399097] FG: delayed_init_work: FG: HW_init success
1435<6>[ 2.399269] FG: set_prop_enable_charging: disabling charging
1436<6>[ 2.400110] mdss_fb_blank_sub: -
1437<6>[ 2.400224] mdss_fb_blank_sub: mdss_fb_blank+0xd8/0xf4 mode:0
1438<6>[ 2.400459] FG: slope_limiter_work: Slope limit sts: 3 val: 6000000 buf[0 8a] written
1439<6>[ 2.408996] FG: fg_backup_sram_registers: Backing SRAM registers
1440<6>[ 2.413795] mdss_dsi_panel_reset: + enable = 1 (override: ph2n_tmo_us)
1441<6>[ 2.413797] [LCD] Start LCD reset pin down when LCD on
1442<3>[ 2.413812] [TOUCH][L][MISC] Interrupt Disabled
1443<3>[ 2.413819] [TOUCH][L][MISC] Reset Pin was set to LOW
1444<6>[ 2.416647] FG: update_sram_data: last_soc: 155 last_cc_soc: 163166649
1445<6>[ 2.416690] FG: update_sram_data: soc:[50], soc_raw[6245], voltage:[3751503], ocv:[3940406], current:[907740], batt_temp:[257], charge_raw [0 / 0]
1446<3>[ 2.420895] [TOUCH][L][MISC] Reset Pin was set to HIGH
1447<3>[ 2.480104] [TOUCH][L][MISC] Interrupt Enabled
1448<3>[ 2.480998] [TOUCH][L][MIT300] MIT300_Set_CoverMode status=0
1449<6>[ 2.481000] mdss_dsi_panel_reset: -
1450<6>[ 2.481037] mdss_dsi_panel_on: ndx=0 cmd_cnt=34
1451<6>[ 2.713277] lge_mdss_dsi_panel_send_on_cmds: reader_mode (0).
1452<6>[ 2.714000] mdss_fb_blank_sub: -
1453<3>[ 2.714003] [TOUCH][D][COMMON] [OUT] LCD Sleep
1454<3>[ 2.714005] [TOUCH][F][MIT300] MIT300_SetLpwgMode()
1455<3>[ 2.714007] [TOUCH][F][MIT300] lpwg_control()
1456<3>[ 2.714009] [TOUCH][L][MIT300] device was set to NORMAL
1457<3>[ 2.714010] [TOUCH][L][COMMON] STATE = NORMAL
1458<3>[ 2.714031] [TOUCH][L][MISC] Interrupt Disabled
1459<3>[ 2.714033] [TOUCH][L][COMMON] STATE = NORMAL
1460<3>[ 2.714048] [TOUCH][L][MISC] Interrupt Enabled
1461<6>[ 2.714284] mdss_fb_set_bl_brightness: value=255 -> bl_lvl=4095
1462<6>[ 2.783564] EXT4-fs (mmcblk0p65): mounted filesystem with ordered data mode. Opts:
1463<7>[ 2.783587] SELinux: initialized (dev mmcblk0p65, type ext4), uses xattr
1464<6>[ 2.825455] EXT4-fs (mmcblk0p65): mounted filesystem with ordered data mode. Opts:
1465<7>[ 2.825475] SELinux: initialized (dev mmcblk0p65, type ext4), uses xattr
1466<6>[ 2.867596] EXT4-fs (mmcblk0p65): mounted filesystem with ordered data mode. Opts:
1467<7>[ 2.867620] SELinux: initialized (dev mmcblk0p65, type ext4), uses xattr
1468<6>[ 2.902835] EXT4-fs (mmcblk0p65): mounted filesystem with ordered data mode. Opts:
1469<7>[ 2.902861] SELinux: initialized (dev mmcblk0p65, type ext4), uses xattr
1470<6>[ 2.938548] EXT4-fs (mmcblk0p63): mounted filesystem with ordered data mode. Opts:
1471<7>[ 2.938573] SELinux: initialized (dev mmcblk0p63, type ext4), uses xattr
1472<6>[ 2.948645] EXT4-fs (mmcblk0p62): mounted filesystem with ordered data mode. Opts:
1473<7>[ 2.948670] SELinux: initialized (dev mmcblk0p62, type ext4), uses xattr
1474<7>[ 2.960782] SELinux: initialized (dev mmcblk0p1, type vfat), uses genfs_contexts
1475<6>[ 2.970722] EXT4-fs (mmcblk0p33): mounted filesystem with ordered data mode. Opts:
1476<7>[ 2.970748] SELinux: initialized (dev mmcblk0p33, type ext4), uses xattr
1477<6>[ 2.970777] SELinux: Context u:object_r:persist_file:s0 is not valid (left unmapped).
1478<6>[ 3.390131] FG: check_sanity_work: vbatt 3751, count 1
1479<6>[ 3.815990] mdss_fb_set_bl_brightness: value=112 -> bl_lvl=608
1480<11>[ 3.820534] init: avc: denied { set } for property=sys.usb.config scontext=u:r:recovery:s0 tcontext=u:object_r:system_radio_prop:s0 tclass=property_service
1481<6>[ 3.820658] android_usb android0: gadget enable(0)
1482<6>[ 3.820667] android_disable: android_disable: checked disable_depth(0)
1483<3>[ 3.820679] msm_otg 78db000.usb: ep_dequeue: Unable to dequeue while in LPM
1484<6>[ 3.820695] ffs_function_disable: ffs_function_disable: config->opened(1)
1485<6>[ 3.820885] android_usb android0: gadget enable(0)
1486<6>[ 3.820935] android_usb android0: LGE-USB request function list: mtp,adb
1487<6>[ 3.820986] android_usb android0: gadget enable(1)
1488<6>[ 3.820993] ffs_function_enable: ffs_function_enable: config->opened(1)
1489<6>[ 3.820999] android_enable: android_enable: checked disable_depth(1)
1490<6>[ 3.821005] mtp_bind_config
1491<6>[ 3.876784] EXT4-fs (mmcblk0p62): mounted filesystem with ordered data mode. Opts:
1492<7>[ 3.876807] SELinux: initialized (dev mmcblk0p62, type ext4), uses xattr
1493<3>[ 4.274376] [TOUCH][L][COMMON] [FINGER] PRESS <0> x = 203, y = 1074, z = 41, w_m = 7, w_n = 5, o = 0
1494<3>[ 4.323184] [TOUCH][L][COMMON] [FINGER] RELEASE<0> x = 203, y = 1073, z = 50, w_m = 5, w_n = 4, o = 0
1495<6>[ 4.390149] FG: fg_batt_profile_init: battery id = 99306
1496<6>[ 4.390161] FG: update_battery_type: [FG_EST]:battery_id : 204
1497<6>[ 4.390166] FG: update_battery_type: [FG_EST]:use battery type : LGE_BL45B1F_Tocad_3000mAh
1498<6>[ 4.390179] of_batterydata_get_best_profile: LGE_BL45B1F_Tocad_3000mAh found
1499<6>[ 4.397927] FG: fg_set_minfreq: Set minfreq enable
1500<6>[ 4.397936] FG: fg_batt_profile_init: [FG_EST]:vbat_est_diff=27314,v_current_pred=3778817,v=3751503
1501<6>[ 4.397942] FG: fg_batt_profile_init: [FG_EST]:Battery profile not same, new battery
1502<6>[ 4.399071] FG: fg_batt_profile_init: [FG_EST]:profiles differ
1503<6>[ 4.399077] FG: fg_batt_profile_init: [FG_EST]:Using new profile
1504<6>[ 4.399085] FG: loaded profile: 10 88 10 7f a3 82 2e 7d 6e 83 15 77 b5 89 62 8f
1505<6>[ 4.399091] FG: loaded profile: 9e 81 00 9a f7 b6 6f c1 66 1a 08 88 46 7e 47 82
1506<6>[ 4.399097] FG: loaded profile: f4 7c 5a 83 c1 65 0e 88 fd 8e 5b 82 cd 93 09 b5
1507<6>[ 4.399103] FG: loaded profile: 6b c0 58 16 3f 0b 60 5b cd 6e 52 f8 3e 47 af 4d
1508<6>[ 4.399108] FG: loaded profile: da 4a 18 28 23 55 18 3c 1f 51 18 28 00 00 00 00
1509<6>[ 4.399114] FG: loaded profile: 00 00 00 00 89 6a 6d 6a 5f 7b d8 88 10 75 2b 61
1510<6>[ 4.399120] FG: loaded profile: 21 66 e7 78 84 75 38 62 00 00 00 00 0a 61 60 a7
1511<6>[ 4.399126] FG: loaded profile: 5d a0 71 0c 28 00 ff 36 f0 11 30 03 00 00 00 00
1512<6>[ 4.399133] FG: new profile: d5 83 5b 7c b6 80 78 76 60 83 bd 74 0e 8a 1f 95
1513<6>[ 4.399139] FG: new profile: 08 82 4f 99 21 b7 68 c2 52 18 f4 83 ed 7c 03 81
1514<6>[ 4.399144] FG: new profile: eb 76 5c 83 85 56 fb 82 70 8e 62 82 b1 98 50 b7
1515<6>[ 4.399150] FG: new profile: aa c3 58 0f 80 0b f5 59 14 70 71 fd c3 2e 63 46
1516<6>[ 4.399156] FG: new profile: ca 41 00 00 66 47 0d 38 8e 32 00 00 00 00 00 00
1517<6>[ 4.399162] FG: new profile: 00 00 00 00 5f 71 93 70 34 64 c1 81 93 76 96 6a
1518<6>[ 4.399168] FG: new profile: da 66 60 7a 8a 75 06 69 0c 74 4d b1 21 49 69 83
1519<6>[ 4.399174] FG: new profile: 67 a0 71 0c 28 00 ff 36 f0 11 30 03 00 00 00 0c
1520<6>[ 4.399180] FG: fg_do_restart: restarting fuel gauge...
1521<6>[ 4.407266] FG: fg_config_esr_extract: ESR extract already enabled
1522<6>[ 4.407274] FG: fg_config_imptr_pulse: imptr_pulse_slow is disabled already
1523<6>[ 4.622656] mtp_open
1524<3>[ 4.875929] [TOUCH][L][COMMON] [FINGER] PRESS <0> x = 245, y = 357, z = 41, w_m = 5, w_n = 4, o = 0
1525<3>[ 4.924811] [TOUCH][L][COMMON] [FINGER] RELEASE<0> x = 248, y = 357, z = 18, w_m = 3, w_n = 2, o = 0
1526<3>[ 5.928498] [TOUCH][L][COMMON] [FINGER] PRESS <0> x = 54, y = 320, z = 16, w_m = 3, w_n = 1, o = 0
1527<5>[ 5.928657] random: nonblocking pool is initialized
1528<3>[ 5.977457] [TOUCH][L][COMMON] [FINGER] RELEASE<0> x = 55, y = 321, z = 18, w_m = 3, w_n = 1, o = 0
1529<3>[ 6.246136] [TOUCH][L][COMMON] [FINGER] PRESS <0> x = 60, y = 350, z = 135, w_m = 10, w_n = 4, o = 0
1530<3>[ 6.328365] [TOUCH][L][COMMON] [FINGER] RELEASE<0> x = 66, y = 354, z = 49, w_m = 7, w_n = 4, o = 0
1531<3>[ 6.931279] [TOUCH][L][COMMON] [FINGER] PRESS <0> x = 235, y = 1105, z = 131, w_m = 9, w_n = 6, o = 0
1532<3>[ 7.447833] [TOUCH][L][COMMON] [FINGER] RELEASE<0> x = 685, y = 1112, z = 18, w_m = 7, w_n = 3, o = 0
1533<4>[ 7.461294] audit_printk_skb: 33 callbacks suppressed
1534<5>[ 7.461309] audit: type=1400 audit(9539.639:22): avc: denied { create } for pid=378 comm="recovery" name="recovery.log" scontext=u:r:recovery:s0 tcontext=u:object_r:media_rw_data_file:s0 tclass=file permissive=1
1535<5>[ 7.511268] audit: type=1400 audit(9539.689:23): avc: denied { write } for pid=378 comm="recovery" path="/data/media/0/recovery.log" dev="mmcblk0p65" ino=341141 scontext=u:r:recovery:s0 tcontext=u:object_r:media_rw_data_file:s0 tclass=file permissive=1
1536<5>[ 7.512453] audit: type=1400 audit(9539.689:24): avc: denied { setattr } for pid=378 comm="recovery" name="recovery.log" dev="mmcblk0p65" ino=341141 scontext=u:r:recovery:s0 tcontext=u:object_r:media_rw_data_file:s0 tclass=file permissive=1
1537<5>[ 7.512539] audit: type=1400 audit(9539.689:25): avc: denied { relabelfrom } for pid=378 comm="recovery" name="recovery.log" dev="mmcblk0p65" ino=341141 scontext=u:r:recovery:s0 tcontext=u:object_r:media_rw_data_file:s0 tclass=file permissive=1
1538<5>[ 7.512589] audit: type=1400 audit(9539.689:26): avc: denied { relabelto } for pid=378 comm="recovery" name="recovery.log" dev="mmcblk0p65" ino=341141 scontext=u:r:recovery:s0 tcontext=u:object_r:media_rw_data_file:s0 tclass=file permissive=1