· 9 years ago · Feb 02, 2017, 11:54 PM
1<6>[ 0.000000]@0 Initializing cgroup subsys cpu
2<6>[ 0.000000]@0 Initializing cgroup subsys cpuacct
3<5>[ 0.000000]@0 Linux version 3.18.47-twrp-3.0 (jc@westerley) (gcc version 6.2.1 20161016 (Linaro GCC 6.2-2016.11) ) #1 SMP PREEMPT Sun Jan 22 22:44:49 EST 2017
4<4>[ 0.000000]@0 CPU: AArch64 Processor [512f2011] revision 1
5<6>[ 0.000000]@0 alternatives: detected feature GIC system register CPU interface
6<6>[ 0.000000]@0 Machine: Qualcomm Technologies, Inc. MSM 8996pro + PMI8996 MTP
7<6>[ 0.000000]@0 efi: Getting EFI parameters from FDT:
8<6>[ 0.000000]@0 efi: UEFI not found.
9<6>[ 0.000000]@0 Reserved memory: reserved region for node 'removed_regions@85800000': base 0x0000000085800000, size 48 MiB
10<6>[ 0.000000]@0 Reserved memory: reserved region for node 'peripheral_region@8ea00000': base 0x000000008ea00000, size 45 MiB
11<6>[ 0.000000]@0 Reserved memory: reserved region for node 'modem_region@88800000': base 0x0000000088800000, size 98 MiB
12<6>[ 0.000000]@0 Reserved memory: reserved region for node 'dfps_data_mem@83400000': base 0x0000000083400000, size 0 MiB
13<6>[ 0.000000]@0 Reserved memory: reserved region for node 'cont_splash_mem@83401000': base 0x0000000083401000, size 35 MiB
14<6>[ 0.000000]@0 Reserved memory: reserved region for node 'ramoops_mem@ac000000': base 0x00000000ac000000, size 2 MiB
15<6>[ 0.000000]@0 Reserved memory: reserved region for node 'param_mem@ac200000': base 0x00000000ac200000, size 1 MiB
16<6>[ 0.000000]@0 Reserved memory: reserved region for node 'bootloader_log_mem@ac300000': base 0x00000000ac300000, size 1 MiB
17<6>[ 0.000000]@0 Reserved memory: reserved region for node 'mtp_mem@ac400000': base 0x00000000ac400000, size 1 MiB
18<6>[ 0.000000]@0 Reserved memory: reserved region for node 'cont_splash_mem_hdmi@b1c00000': base 0x00000000b1c00000, size 35 MiB
19<6>[ 0.000000]@0 Removed memory: created DMA memory pool at 0x0000000085800000, size 48 MiB
20<6>[ 0.000000]@0 Reserved memory: initialized node removed_regions@85800000, compatible id removed-dma-pool
21<6>[ 0.000000]@0 Removed memory: created DMA memory pool at 0x000000008ea00000, size 45 MiB
22<6>[ 0.000000]@0 Reserved memory: initialized node peripheral_region@8ea00000, compatible id removed-dma-pool
23<6>[ 0.000000]@0 Reserved memory: allocated memory for 'adsp_region' node: base 0x00000000ff800000, size 4 MiB
24<6>[ 0.000000]@0 Reserved memory: created CMA memory pool at 0x00000000ff800000, size 4 MiB
25<6>[ 0.000000]@0 Reserved memory: initialized node adsp_region, compatible id shared-dma-pool
26<6>[ 0.000000]@0 Reserved memory: allocated memory for 'qseecom_region' node: base 0x00000000fe400000, size 20 MiB
27<6>[ 0.000000]@0 Reserved memory: created CMA memory pool at 0x00000000fe400000, size 20 MiB
28<6>[ 0.000000]@0 Reserved memory: initialized node qseecom_region, compatible id shared-dma-pool
29<6>[ 0.000000]@0 Reserved memory: allocated memory for 'secure_region' node: base 0x00000000f8800000, size 92 MiB
30<6>[ 0.000000]@0 Reserved memory: created CMA memory pool at 0x00000000f8800000, size 92 MiB
31<6>[ 0.000000]@0 Reserved memory: initialized node secure_region, compatible id shared-dma-pool
32<6>[ 0.000000]@0 Removed memory: created DMA memory pool at 0x0000000088800000, size 98 MiB
33<6>[ 0.000000]@0 Reserved memory: initialized node modem_region@88800000, compatible id removed-dma-pool
34<6>[ 0.000000]@0 cma: Reserved 32 MiB at 0x00000000f6800000
35<7>[ 0.000000]@0 On node 0 totalpages: 1514064
36<7>[ 0.000000]@0 DMA zone: 11524 pages used for memmap
37<7>[ 0.000000]@0 DMA zone: 0 pages reserved
38<7>[ 0.000000]@0 DMA zone: 737536 pages, LIFO batch:31
39<7>[ 0.000000]@0 Normal zone: 12134 pages used for memmap
40<7>[ 0.000000]@0 Normal zone: 776528 pages, LIFO batch:31
41<6>[ 0.000000]@0 psci: probing for conduit method from DT.
42<6>[ 0.000000]@0 psci: PSCIv1.0 detected in firmware.
43<6>[ 0.000000]@0 psci: Using standard PSCI v0.2 function IDs
44<6>[ 0.000000]@0 psci: Initializing psci_cpu_init
45<6>[ 0.000000]@0 psci: Initializing psci_cpu_init
46<6>[ 0.000000]@0 psci: Initializing psci_cpu_init
47<6>[ 0.000000]@0 PERCPU: Embedded 13 pages/cpu @ffffffc17d716000 s21760 r0 d31488 u53248
48<7>[ 0.000000]@0 pcpu-alloc: s21760 r0 d31488 u53248 alloc=13*4096
49<7>[ 0.000000]@0 pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3
50<4>[ 0.000000]@0 Built 1 zonelists in Zone order, mobility grouping on. Total pages: 1490406
51<5>[ 0.000000]@0 Kernel command line: sched_enable_hmp=1 sched_enable_power_aware=1 console=ttyHSL0,115200,n8 androidboot.console=ttyHSL0 androidboot.hardware=qcom androidboot.bootdevice=624000.ufshc androidboot.selinux=permissive user_debug=31 msm_rtb.filter=0x237 ehci-hcd.park=3 lpm_levels.sleep_disabled=1 cma=32M@0-0xffffffff enforcing=0 androidboot.bootdevice=624000.ufshc androidboot.verifiedbootstate=orange androidboot.veritymode=enforcing androidboot.keymaster=1 androidboot.serialno=d1fb6b58 gpt androidboot.baseband=msm mdss_mdp.panel=1:dsi:0:qcom,mdss_dsi_samsung_s6e3fa5_1080p_cmd:1:none:cfg:single_dsi fpsimd.fpsimd_settings=0 app_setting.use_app_setting=0 androidboot.mode=recovery androidboot.ftm_mode=ftm_recovery androidboot.project_name=15811 androidboot.selinux=permissive androidboot.rf_version=22 androidboot.hw_version=28 ddr_manufacture_info=Samsung ddr_row0_info=16 androidboot.pcba_number=001581206C14032000002602 androidboot.enable_dm_verity=1 androidboot.secboot<6>PID hash table entries: 4096 (order: 3, 32768 bytes)
52<6>[ 0.000000]@0 Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
53<6>[ 0.000000]@0 Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
54<4>[ 0.000000]@0 Memory: 5681004K/6056256K available (11344K kernel code, 1093K rwdata, 2992K rodata, 2128K init, 3484K bss, 375252K reserved)
55<5>[ 0.000000]@0 Virtual kernel memory layout:
56<5> vmalloc : 0xffffff8000000000 - 0xffffffbdbfff0000 ( 246 GB)
57<5> vmemmap : 0xffffffbdc0000000 - 0xffffffbfc0000000 ( 8 GB maximum)
58<5> 0xffffffbdc0000000 - 0xffffffbdc5f65400 ( 95 MB actual)
59<5> PCI I/O : 0xffffffbffa000000 - 0xffffffbffb000000 ( 16 MB)
60<5> fixed : 0xffffffbffbdfd000 - 0xffffffbffbdff000 ( 8 KB)
61<5> modules : 0xffffffbffc000000 - 0xffffffc000000000 ( 64 MB)
62<5> memory : 0xffffffc000000000 - 0xffffffc17d950000 ( 6105 MB)
63<5> .init : 0xffffffc001000000 - 0xffffffc001214000 ( 2128 KB)
64<5> .text : 0xffffffc000080000 - 0xffffffc001000000 ( 15872 KB)
65<5> .data : 0xffffffc00122c000 - 0xffffffc00133d600 ( 1094 KB)
66<6>[ 0.000000]@0 SLUB: HWalign=128, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
67<6>[ 0.000000]@0 HMP scheduling enabled.
68<6>[ 0.000000]@0 Preemptible hierarchical RCU implementation.
69<6>[ 0.000000]@0 RCU dyntick-idle grace-period acceleration is enabled.
70<6>[ 0.000000]@0 NR_IRQS:64 nr_irqs:64 0
71<6>[ 0.000000]@0 CPU0: found redistributor 0 region 0:0x0000000009c00000
72<4>[ 0.000000]@0 mpm_init_irq_domain(): Cannot find irq controller for qcom,gpio-parent
73<3>[ 0.000000]@0 MPM 1 irq mapping errored -517
74<6>[ 0.000000]@0 Offload RCU callbacks from all CPUs
75<6>[ 0.000000]@0 Offload RCU callbacks from CPUs: 0-3.
76<6>[ 0.000000]@0 Architected cp15 and mmio timer(s) running at 19.20MHz (virt/virt).
77<6>[ 0.000000]@0 sched_clock: 56 bits at 19MHz, resolution 52ns, wraps every 3579139424256ns
78<6>[ 0.000016]@0 Switched to clocksource arch_sys_counter
79<6>[ 0.000639]@0 Calibrating delay loop (skipped), value calculated using timer frequency.. 38.40 BogoMIPS (lpj=192000)
80<6>[ 0.000653]@0 pid_max: default: 32768 minimum: 301
81<6>[ 0.000712]@0 Security Framework initialized
82<6>[ 0.000726]@0 SELinux: Initializing.
83<7>[ 0.000749]@0 SELinux: Starting in permissive mode
84<6>[ 0.000781]@0 Mount-cache hash table entries: 16384 (order: 5, 131072 bytes)
85<6>[ 0.000789]@0 Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes)
86<6>[ 0.001244]@0 Initializing cgroup subsys freezer
87<4>[ 0.001496]@0 /cpus/cpu@0: Unknown CPU type
88<4>[ 0.001505]@0 /cpus/cpu@1: Unknown CPU type
89<4>[ 0.001514]@0 /cpus/cpu@100: Unknown CPU type
90<4>[ 0.001523]@0 /cpus/cpu@101: Unknown CPU type
91<6>[ 0.001549]@0 hw perfevents: enabled with arm/armv8-pmuv3 PMU driver, 9 counters available
92<6>[ 0.001572]@0 EFI services will not be available.
93<4>[ 0.009244]@0 NOHZ: local_softirq_pending 02
94<4>[ 0.010872]@0
95<4>**********************************************************
96<4>[ 0.010880]@0 ** NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE **
97<4>[ 0.010885]@0 ** **
98<4>[ 0.010889]@0 ** trace_printk() being used. Allocating extra memory. **
99<4>[ 0.010893]@0 ** **
100<4>[ 0.010897]@0 ** This means that this is a DEBUG kernel and it is **
101<4>[ 0.010901]@0 ** unsafe for produciton use. **
102<4>[ 0.010905]@0 ** **
103<4>[ 0.010909]@0 ** If you see this message and you are not debugging **
104<4>[ 0.010912]@0 ** the kernel, report this immediately to your vendor! **
105<4>[ 0.010916]@0 ** **
106<4>[ 0.010920]@0 ** NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE **
107<4>[ 0.010923]@0 **********************************************************
108<6>[ 0.012626]@0 MSM Memory Dump base table set up
109<6>[ 0.012650]@0 MSM Memory Dump apps data table set up
110<3>[ 0.012670]@0 hyp_assign_table is not functional as qcom_secure_mem is not allocated.
111<6>[ 0.012975]@0 clock-cpu-8996: configuring clocks for the perf cluster
112<6>[ 0.013116]@0 cpu_clock_8996_early_init: finished CPU clock configuration
113<6>[ 0.015592]@1 CPU1: found redistributor 1 region 0:0x0000000009c40000
114<6>[ 0.018119]@2 CPU2: found redistributor 100 region 0:0x0000000009c80000
115<6>[ 0.020510]@3 CPU3: found redistributor 101 region 0:0x0000000009cc0000
116<6>[ 0.020665]@0 Brought up 4 CPUs
117<6>[ 0.020682]@0 SMP: Total of 4 processors activated.
118<6>[ 0.022594]@2 DMI not present or invalid.
119<6>[ 0.029447]@2 pinctrl core: initialized pinctrl subsystem
120<6>[ 0.029815]@2 regulator-dummy: no parameters
121<6>[ 0.087195]@2 NET: Registered protocol family 16
122<6>[ 0.100098]@2 cpuidle: using governor ladder
123<6>[ 0.120084]@2 cpuidle: using governor menu
124<6>[ 0.140085]@2 cpuidle: using governor qcom
125<6>[ 0.140740]@2 vdso: 2 pages (1 code @ ffffffc001231000, 1 data @ ffffffc001230000)
126<6>[ 0.141206]@2 software IO TLB [mem 0xffc00000-0x100000000] (4MB) mapped at [ffffffc0bfc00000-ffffffc0bfffffff]
127<6>[ 0.141944]@2 DMA: preallocated 256 KiB pool for atomic allocations
128<6>[ 0.144527]@2 kernel boot_mode = normal[0]
129<6>[ 0.155526]@2 sps:sps is ready.
130<6>[ 0.156042]@2 i2c-msm-v2 75ba000.i2c: could not find pctldev for node /soc/pinctrl@01010000/i2c_12/i2c_12_active, deferring probe
131<6>[ 0.156661]@2 i2c-msm-v2 757a000.i2c: could not find pctldev for node /soc/pinctrl@01010000/i2c_6/i2c_6_active, deferring probe
132<6>[ 0.156918]@2 i2c-msm-v2 75b5000.i2c: could not find pctldev for node /soc/pinctrl@01010000/i2c_7/i2c_7_active, deferring probe
133<6>[ 0.157176]@2 i2c-msm-v2 7577000.i2c: could not find pctldev for node /soc/pinctrl@01010000/i2c_3/i2c_3_active, deferring probe
134<6>[ 0.157430]@2 i2c-msm-v2 75b6000.i2c: could not find pctldev for node /soc/pinctrl@01010000/i2c_8/i2c_8_active, deferring probe
135<4>[ 0.157795]@2 irq: no irq domain found for /soc/pinctrl@01010000 !
136<3>[ 0.159269]@2 cpu-clock-8996 6400000.qcom,cpu-clock-8996: resources init failed
137<3>[ 0.182350]@2 smd_channel_probe_now: allocation table not initialized
138<3>[ 0.182602]@2 smd_channel_probe_now: allocation table not initialized
139<3>[ 0.182854]@2 smd_channel_probe_now: allocation table not initialized
140<3>[ 0.183096]@2 smd_channel_probe_now: allocation table not initialized
141<6>[ 0.183315]@2 msm_watchdog 9830000.qcom,wdt: wdog absent resource not present
142<6>[ 0.183548]@2 msm_watchdog 9830000.qcom,wdt: MSM Watchdog Initialized
143<6>[ 0.184184]@2 msm_rpm_dev_probe: APSS-RPM communication over GLINK
144<3>[ 0.191709]@2 spmi_pmic_arb 400f000.qcom,spmi: PMIC Arb Version-2 0x20010000
145<3>[ 0.193092]@2 spmi_pmic_arb 400f000.qcom,spmi: missing property: qcom,pmic-arb-max-periph-interrupts
146<6>[ 0.197216]@2 pmi8994_s2: 400 <--> 1065 mV at 1000 mV normal idle
147<6>[ 0.197828]@2 platform 9300000.qcom,lpass: assigned reserved memory node peripheral_region@8ea00000
148<6>[ 0.198087]@2 platform ce0000.qcom,venus: assigned reserved memory node peripheral_region@8ea00000
149<6>[ 0.198491]@2 platform 1c00000.qcom,ssc: assigned reserved memory node peripheral_region@8ea00000
150<6>[ 0.198807]@2 platform 2080000.qcom,mss: assigned reserved memory node modem_region@88800000
151<6>[ 0.201528]@1 msm-thermal 70000.qcom,msm-thermal: msm_thermal:Failed reading node=/soc/qcom,msm-thermal, key=qcom,rpm-phase-resource-type err=-22. KTM continues
152<6>[ 0.201551]@1 msm-thermal 70000.qcom,msm-thermal: msm_thermal:Failed reading node=/soc/qcom,msm-thermal, key=qcom,gfx-sensor-id. err=-22. KTM continues
153<6>[ 0.201569]@1 msm-thermal 70000.qcom,msm-thermal: probe_vdd_mx:Failed reading node=/soc/qcom,msm-thermal, key=qcom,mx-restriction-temp. KTM continues
154<6>[ 0.201582]@1 msm-thermal 70000.qcom,msm-thermal: probe_psm:Failed reading node=/soc/qcom,msm-thermal, key=qcom,pmic-sw-mode-temp. err=-22. KTM continues
155<6>[ 0.201689]@1 msm_thermal:vdd_restriction_reg_init Defer regulator vdd-dig probe
156<3>[ 0.201697]@1 msm_thermal:probe_vdd_rstr Err regulator init. err:-517. KTM continues.
157<6>[ 0.201705]@1 msm-thermal 70000.qcom,msm-thermal: probe_vdd_rstr:Failed reading node=/soc/qcom,msm-thermal, key=qcom,max-freq-level. err=-517. KTM continues
158<3>[ 0.201714]@1 msm_thermal:msm_thermal_dev_probe Failed reading node=/soc/qcom,msm-thermal, key=qcom,online-hotplug-core. err:-517
159<6>[ 0.206391]@1 platform soc:qcom,msm-adsprpc-mem: assigned reserved memory node adsp_region
160<3>[ 0.210396]@0 smd_channel_probe_now: allocation table not initialized
161<6>[ 0.210604]@2 msm_rpm_trans_notify_state: glink config params: transport=(null), edge=rpm, name=rpm_requests
162<6>[ 0.211422]@2 msm_cache_erp64 6500000.qcom,cache_erp64: Registering for L1 error interrupts
163<6>[ 0.211521]@2 msm_cache_erp64 6500000.qcom,cache_erp64: Registering for L2 error interrupts
164<6>[ 0.211666]@2 msm_cache_erp64 6500000.qcom,cache_erp64: Registering for L3 error interrupts
165<6>[ 0.211908]@2 msm_m4m_erp 9a40000.qcom,m4m_erp64: Registering for M4M error interrupts
166<6>[ 0.214771]@2 console [pstore-1] enabled
167<6>[ 0.214877]@2 pstore: Registered ramoops as persistent store backend
168<6>[ 0.214887]@2 ramoops: attached 0x200000@0xac000000, ecc: 0/0
169<3>[ 0.215011]@2 XCB bootloader_log_probe
170<6>[ 0.215193]@2 bootloader_log!
171<6>[ 0.216100]@2 apc0_pwrcl_mem_acc_corner: 0 <--> 0 mV
172<6>[ 0.216437]@2 apc1_perfcl_mem_acc_corner: 0 <--> 0 mV
173<6>[ 0.216770]@2 apcc_l3_mem_acc_corner: 0 <--> 0 mV
174<6>[ 0.217075]@2 gfx_mem_acc_corner: 0 <--> 0 mV
175<6>[ 0.217451]@2 kryo0-retention: 468 <--> 892 mV at 520 mV
176<6>[ 0.217642]@2 kryo0: 468 <--> 892 mV at 754 mV
177<6>[ 0.217770]@2 kryo_regulator_probe: kryo0: default LDO functional volt=754021 uV, LDO retention volt=521789 uV, Vref func=325285 + 4466*(val), cluster-num=0
178<6>[ 0.218059]@2 kryo1-retention: 468 <--> 892 mV at 520 mV
179<6>[ 0.218255]@2 kryo1: 468 <--> 892 mV at 754 mV
180<6>[ 0.218378]@2 kryo_regulator_probe: kryo1: default LDO functional volt=754021 uV, LDO retention volt=521789 uV, Vref func=325285 + 4466*(val), cluster-num=1
181<6>[ 0.222532]@2 platform soc:qcom,kgsl-hyp: assigned reserved memory node peripheral_region@8ea00000
182<3>[ 0.223796]@2 msm_mpm_dev_probe(): Cannot get clk resource for XO: -517
183<4>[ 0.241156]@2 __of_mpm_init(): MPM driver mapping exists
184<6>[ 0.243111]@0 i2c-msm-v2 75ba000.i2c: probing driver i2c-msm-v2
185<3>[ 0.243296]@0 i2c-msm-v2 75ba000.i2c: error on clk_get(core_clk):-517
186<3>[ 0.243312]@0 i2c-msm-v2 75ba000.i2c: error probe() failed with err:-517
187<6>[ 0.243772]@0 i2c-msm-v2 757a000.i2c: probing driver i2c-msm-v2
188<3>[ 0.243858]@0 i2c-msm-v2 757a000.i2c: error on clk_get(core_clk):-517
189<3>[ 0.243870]@0 i2c-msm-v2 757a000.i2c: error probe() failed with err:-517
190<6>[ 0.244272]@0 i2c-msm-v2 75b5000.i2c: probing driver i2c-msm-v2
191<3>[ 0.244356]@0 i2c-msm-v2 75b5000.i2c: error on clk_get(core_clk):-517
192<3>[ 0.244368]@0 i2c-msm-v2 75b5000.i2c: error probe() failed with err:-517
193<6>[ 0.244768]@0 i2c-msm-v2 7577000.i2c: probing driver i2c-msm-v2
194<3>[ 0.244848]@0 i2c-msm-v2 7577000.i2c: error on clk_get(core_clk):-517
195<3>[ 0.244861]@0 i2c-msm-v2 7577000.i2c: error probe() failed with err:-517
196<6>[ 0.245219]@0 i2c-msm-v2 75b6000.i2c: probing driver i2c-msm-v2
197<3>[ 0.245297]@0 i2c-msm-v2 75b6000.i2c: error on clk_get(core_clk):-517
198<3>[ 0.245310]@0 i2c-msm-v2 75b6000.i2c: error probe() failed with err:-517
199<3>[ 0.245491]@0 cpu-clock-8996 6400000.qcom,cpu-clock-8996: resources init failed
200<6>[ 0.246351]@0 pm8994_s1_corner: 0 <--> 0 mV at 0 mV normal idle
201<6>[ 0.246815]@0 pm8994_s1_floor_corner: 0 <--> 0 mV at 0 mV normal idle
202<6>[ 0.247185]@0 pm8994_s1_corner_ao: 0 <--> 0 mV at 0 mV normal idle
203<6>[ 0.247620]@0 pm8994_s2_corner: 0 <--> 0 mV at 0 mV normal idle
204<6>[ 0.247982]@0 pm8994_s2_corner_ao: 0 <--> 0 mV at 0 mV normal idle
205<6>[ 0.248414]@0 pm8994_s3: 1300 mV normal idle
206<6>[ 0.248833]@0 pm8994_s4: 1800 mV normal idle
207<6>[ 0.249256]@0 pm8994_s5: 2150 mV normal idle
208<6>[ 0.249689]@0 pm8994_s7: 800 mV normal idle
209<6>[ 0.250222]@0 pm8994_l1: 1000 mV normal idle
210<6>[ 0.250684]@0 pm8994_l2: 1250 mV normal idle
211<6>[ 0.251425]@0 pm8994_l3: 1100 mV normal idle
212<6>[ 0.251859]@0 pm8994_l4: 1225 mV normal idle
213<6>[ 0.252279]@0 pm8994_l6: 1200 mV normal idle
214<6>[ 0.252688]@0 pm8994_l8: 1800 mV normal idle
215<6>[ 0.253106]@0 pm8994_l9: 1800 mV normal idle
216<6>[ 0.253520]@0 pm8994_l10: 1800 mV normal idle
217<6>[ 0.253932]@0 pm8994_l11: 1150 mV normal idle
218<6>[ 0.254375]@0 pm8994_l12: 1800 mV normal idle
219<6>[ 0.255265]@0 pm8994_l13: 29500 <--> 2950 mV at 2950 mV normal idle
220<6>[ 0.255703]@0 pm8994_l15: 1800 mV normal idle
221<6>[ 0.256149]@0 pm8994_l16: 2700 mV normal idle
222<6>[ 0.256567]@0 pm8994_l17: 2600 mV normal idle
223<6>[ 0.256990]@0 pm8994_l18: 3300 mV normal idle
224<6>[ 0.257419]@0 pm8994_l19: 3000 mV normal idle
225<6>[ 0.257835]@0 pm8994_l20: 2950 mV normal idle
226<6>[ 0.258259]@0 pm8994_l21: 2950 mV normal idle
227<6>[ 0.258678]@0 pm8994_l22: 3000 <--> 3300 mV at 3000 mV normal idle
228<6>[ 0.259103]@0 pm8994_l23: 2800 mV normal idle
229<6>[ 0.259514]@0 pm8994_l24: 3075 mV normal idle
230<6>[ 0.259948]@0 pm8994_l25: 1200 mV normal idle
231<6>[ 0.260815]@0 pm8994_l26_corner: 0 <--> 0 mV at 0 mV normal idle
232<6>[ 0.261204]@0 pm8994_l26_floor_corner: 0 <--> 0 mV at 0 mV normal idle
233<6>[ 0.261616]@0 pm8994_l27: 1000 <--> 1200 mV at 1030 mV normal idle
234<6>[ 0.262056]@0 pm8994_l28: 925 mV normal idle
235<6>[ 0.262811]@0 pm8994_l29: 2800 mV normal idle
236<6>[ 0.263249]@0 pm8994_l30: 1800 mV normal idle
237<6>[ 0.263691]@0 pm8994_l32: 1800 mV normal idle
238<6>[ 0.264095]@0 pm8994_lvs1: no parameters
239<6>[ 0.264469]@0 pm8994_lvs2: no parameters
240<6>[ 0.264865]@0 pmi8994_s1: 1025 mV normal idle
241<6>[ 0.265272]@0 pmi8994_boost_5v: no parameters
242<3>[ 0.265424]@0 qcom,rpm-smd-regulator soc:qcom,rpm-smd:rpm-regulator-bstb:regulator-bst: Failed to find supply parent
243<3>[ 0.265527]@0 rpm_vreg_device_probe: regulator_register failed: pmi8994_boost_5v, rc=-517
244<6>[ 0.265842]@0 pmi8994_boost_pin_ctrl: no parameters
245<3>[ 0.265910]@0 qcom,rpm-smd-regulator soc:qcom,rpm-smd:rpm-regulator-bstb:regulator-bst-pin-ctrl: Failed to find supply parent
246<3>[ 0.266002]@0 rpm_vreg_device_probe: regulator_register failed: pmi8994_boost_pin_ctrl, rc=-517
247<6>[ 0.266364]@0 pmi8994_boostbypass: 3150 <--> 3600 mV at 3150 mV normal idle
248<6>[ 0.266715]@0 pm8994_s11: 470 <--> 1140 mV at 905 mV normal idle
249<6>[ 0.266918]@0 pm8994_s11_avs_limit: 470 <--> 1140 mV
250<6>[ 0.267029]@0 spm_regulator_probe: name=pm8994_s11, range=LV, voltage=905000 uV, mode=AUTO, step rate=2400 uV/us
251<6>[ 0.267990]@0 msm-thermal 70000.qcom,msm-thermal: msm_thermal:Failed reading node=/soc/qcom,msm-thermal, key=qcom,rpm-phase-resource-type err=-22. KTM continues
252<6>[ 0.268019]@0 msm-thermal 70000.qcom,msm-thermal: msm_thermal:Failed reading node=/soc/qcom,msm-thermal, key=qcom,gfx-sensor-id. err=-22. KTM continues
253<6>[ 0.268032]@0 msm_thermal:sensor_mgr_init_threshold threshold id already initialized
254<6>[ 0.268047]@0 msm-thermal 70000.qcom,msm-thermal: probe_vdd_mx:Failed reading node=/soc/qcom,msm-thermal, key=qcom,mx-restriction-temp. KTM continues
255<6>[ 0.268063]@0 msm-thermal 70000.qcom,msm-thermal: probe_psm:Failed reading node=/soc/qcom,msm-thermal, key=qcom,pmic-sw-mode-temp. err=-22. KTM continues
256<6>[ 0.268474]@0 msm_thermal:vdd_restriction_reg_init Defer regulator vdd-gfx probe
257<3>[ 0.268490]@0 msm_thermal:probe_vdd_rstr Err regulator init. err:-517. KTM continues.
258<6>[ 0.268503]@0 msm-thermal 70000.qcom,msm-thermal: probe_vdd_rstr:Failed reading node=/soc/qcom,msm-thermal, key=qcom,max-freq-level. err=-517. KTM continues
259<3>[ 0.268515]@0 msm_thermal:msm_thermal_dev_probe Failed reading node=/soc/qcom,msm-thermal, key=qcom,online-hotplug-core. err:-517
260<3>[ 0.269094]@0 msm_mpm_dev_probe(): Cannot get clk resource for XO: -517
261<6>[ 0.269600]@0 i2c-msm-v2 75ba000.i2c: probing driver i2c-msm-v2
262<3>[ 0.269697]@0 i2c-msm-v2 75ba000.i2c: error on clk_get(core_clk):-517
263<3>[ 0.269711]@0 i2c-msm-v2 75ba000.i2c: error probe() failed with err:-517
264<6>[ 0.270184]@0 i2c-msm-v2 757a000.i2c: probing driver i2c-msm-v2
265<3>[ 0.270284]@0 i2c-msm-v2 757a000.i2c: error on clk_get(core_clk):-517
266<3>[ 0.270297]@0 i2c-msm-v2 757a000.i2c: error probe() failed with err:-517
267<6>[ 0.270723]@0 i2c-msm-v2 75b5000.i2c: probing driver i2c-msm-v2
268<3>[ 0.270804]@0 i2c-msm-v2 75b5000.i2c: error on clk_get(core_clk):-517
269<3>[ 0.270817]@0 i2c-msm-v2 75b5000.i2c: error probe() failed with err:-517
270<6>[ 0.271215]@0 i2c-msm-v2 7577000.i2c: probing driver i2c-msm-v2
271<3>[ 0.271296]@0 i2c-msm-v2 7577000.i2c: error on clk_get(core_clk):-517
272<3>[ 0.271308]@0 i2c-msm-v2 7577000.i2c: error probe() failed with err:-517
273<6>[ 0.271661]@0 i2c-msm-v2 75b6000.i2c: probing driver i2c-msm-v2
274<3>[ 0.271742]@0 i2c-msm-v2 75b6000.i2c: error on clk_get(core_clk):-517
275<3>[ 0.271754]@0 i2c-msm-v2 75b6000.i2c: error probe() failed with err:-517
276<3>[ 0.272068]@0 cpu-clock-8996 6400000.qcom,cpu-clock-8996: resources init failed
277<6>[ 0.290692]@0 qcom,gcc-8996 300000.qcom,gcc: Registered GCC clocks.
278<6>[ 0.291762]@0 vfe0_clk_src: set OPP pair(75000000 Hz: 3 uV) on a10000.qcom,vfe0
279<6>[ 0.291788]@0 vfe0_clk_src: set OPP pair(320000000 Hz: 5 uV) on a10000.qcom,vfe0
280<6>[ 0.291801]@0 vfe0_clk_src: set OPP pair(600000000 Hz: 7 uV) on a10000.qcom,vfe0
281<6>[ 0.292113]@0 vfe1_clk_src: set OPP pair(75000000 Hz: 3 uV) on a14000.qcom,vfe1
282<6>[ 0.292130]@0 vfe1_clk_src: set OPP pair(320000000 Hz: 5 uV) on a14000.qcom,vfe1
283<6>[ 0.292141]@0 vfe1_clk_src: set OPP pair(600000000 Hz: 7 uV) on a14000.qcom,vfe1
284<6>[ 0.292469]@0 cpp_clk_src: set OPP pair(100000000 Hz: 3 uV) on a04000.qcom,cpp
285<6>[ 0.292490]@0 cpp_clk_src: set OPP pair(480000000 Hz: 5 uV) on a04000.qcom,cpp
286<6>[ 0.292500]@0 cpp_clk_src: set OPP pair(640000000 Hz: 7 uV) on a04000.qcom,cpp
287<6>[ 0.301373]@0 qcom,mmsscc-8996 8c0000.qcom,mmsscc: Registered MMSS clocks.
288<6>[ 0.303240]@0 pmi8994_boost_5v: no parameters
289<3>[ 0.303390]@0 qcom,rpm-smd-regulator soc:qcom,rpm-smd:rpm-regulator-bstb:regulator-bst: Failed to find supply parent
290<3>[ 0.303492]@0 rpm_vreg_device_probe: regulator_register failed: pmi8994_boost_5v, rc=-517
291<6>[ 0.303716]@0 pmi8994_boost_pin_ctrl: no parameters
292<3>[ 0.303776]@0 qcom,rpm-smd-regulator soc:qcom,rpm-smd:rpm-regulator-bstb:regulator-bst-pin-ctrl: Failed to find supply parent
293<3>[ 0.303864]@0 rpm_vreg_device_probe: regulator_register failed: pmi8994_boost_pin_ctrl, rc=-517
294<6>[ 0.304785]@0 msm-thermal 70000.qcom,msm-thermal: msm_thermal:Failed reading node=/soc/qcom,msm-thermal, key=qcom,rpm-phase-resource-type err=-22. KTM continues
295<6>[ 0.304812]@0 msm-thermal 70000.qcom,msm-thermal: msm_thermal:Failed reading node=/soc/qcom,msm-thermal, key=qcom,gfx-sensor-id. err=-22. KTM continues
296<6>[ 0.304825]@0 msm_thermal:sensor_mgr_init_threshold threshold id already initialized
297<6>[ 0.304839]@0 msm-thermal 70000.qcom,msm-thermal: probe_vdd_mx:Failed reading node=/soc/qcom,msm-thermal, key=qcom,mx-restriction-temp. KTM continues
298<6>[ 0.304854]@0 msm-thermal 70000.qcom,msm-thermal: probe_psm:Failed reading node=/soc/qcom,msm-thermal, key=qcom,pmic-sw-mode-temp. err=-22. KTM continues
299<6>[ 0.305104]@0 msm_thermal:vdd_restriction_reg_init Defer regulator vdd-gfx probe
300<3>[ 0.305116]@0 msm_thermal:probe_vdd_rstr Err regulator init. err:-517. KTM continues.
301<6>[ 0.305127]@0 msm-thermal 70000.qcom,msm-thermal: probe_vdd_rstr:Failed reading node=/soc/qcom,msm-thermal, key=qcom,max-freq-level. err=-517. KTM continues
302<3>[ 0.305139]@0 msm_thermal:msm_thermal_dev_probe Failed reading node=/soc/qcom,msm-thermal, key=qcom,online-hotplug-core. err:-517
303<6>[ 0.305811]@0 cpr3_msm8996_hmss_read_fuse_data: apc0_pwrcl_corner: speed bin = 0
304<6>[ 0.305829]@0 cpr3_msm8996_hmss_read_fuse_data: apc0_pwrcl_corner: CPR fusing revision = 2
305<6>[ 0.305838]@0 cpr3_msm8996_hmss_read_fuse_data: apc0_pwrcl_corner: using redundant fuses = N
306<6>[ 0.305849]@0 cpr3_msm8996_hmss_read_fuse_data: apc0_pwrcl_corner: CPR limitation = none
307<6>[ 0.305858]@0 cpr3_msm8996_hmss_read_fuse_data: apc0_pwrcl_corner: CPR partial binning limitation = none
308<6>[ 0.305869]@0 cpr3_msm8996_hmss_read_fuse_data: apc0_pwrcl_corner: Retention voltage fuses: VDD_MX = 4, VDD_APCC = 4
309<6>[ 0.306085]@0 cpr3_hmss_kvreg_init: apc0_pwrcl_corner: LDO min headroom=80000 uV, LDO max headroom=470000 uV, LDO adj=0 uV, LDO mode=allowed, LDO retention=490000 uV
310<6>[ 0.306343]@0 cpr3_msm8996_hmss_calculate_open_loop_voltages: apc0_pwrcl_corner: fused MinSVS: open-loop= 565000 uV
311<6>[ 0.306358]@0 cpr3_msm8996_hmss_calculate_open_loop_voltages: apc0_pwrcl_corner: fused SVS: open-loop= 645000 uV
312<6>[ 0.306367]@0 cpr3_msm8996_hmss_calculate_open_loop_voltages: apc0_pwrcl_corner: fused NOM: open-loop= 745000 uV
313<6>[ 0.306376]@0 cpr3_msm8996_hmss_calculate_open_loop_voltages: apc0_pwrcl_corner: fused TURBO: open-loop= 900000 uV
314<6>[ 0.306509]@0 cpr3_msm8996_hmss_calculate_target_quotients: apc0_pwrcl_corner: fused MinSVS: quot[ 7]= 269
315<6>[ 0.306520]@0 cpr3_msm8996_hmss_calculate_target_quotients: apc0_pwrcl_corner: fused SVS: quot[ 7]= 417, quot_offset[ 7]= 105
316<6>[ 0.306530]@0 cpr3_msm8996_hmss_calculate_target_quotients: apc0_pwrcl_corner: fused NOM: quot[ 7]= 642, quot_offset[ 7]= 225
317<6>[ 0.306540]@0 cpr3_msm8996_hmss_calculate_target_quotients: apc0_pwrcl_corner: fused TURBO: quot[ 7]= 988, quot_offset[ 7]= 345
318<6>[ 0.306737]@0 cpr3_msm8996_hmss_read_fuse_data: apc0_cbf_corner: speed bin = 0
319<6>[ 0.306748]@0 cpr3_msm8996_hmss_read_fuse_data: apc0_cbf_corner: CPR fusing revision = 2
320<6>[ 0.306757]@0 cpr3_msm8996_hmss_read_fuse_data: apc0_cbf_corner: using redundant fuses = N
321<6>[ 0.306767]@0 cpr3_msm8996_hmss_read_fuse_data: apc0_cbf_corner: CPR limitation = none
322<6>[ 0.306777]@0 cpr3_msm8996_hmss_read_fuse_data: apc0_cbf_corner: CPR partial binning limitation = none
323<6>[ 0.306788]@0 cpr3_msm8996_hmss_read_fuse_data: apc0_cbf_corner: Retention voltage fuses: VDD_MX = 4, VDD_APCC = 4
324<6>[ 0.306964]@0 cpr3_msm8996_hmss_calculate_open_loop_voltages: apc0_cbf_corner: fused MinSVS: open-loop= 565000 uV
325<6>[ 0.306974]@0 cpr3_msm8996_hmss_calculate_open_loop_voltages: apc0_cbf_corner: fused SVS: open-loop= 645000 uV
326<6>[ 0.306983]@0 cpr3_msm8996_hmss_calculate_open_loop_voltages: apc0_cbf_corner: fused NOM: open-loop= 745000 uV
327<6>[ 0.306992]@0 cpr3_msm8996_hmss_calculate_open_loop_voltages: apc0_cbf_corner: fused TURBO: open-loop= 900000 uV
328<6>[ 0.307004]@0 cpr3_msm8996_hmss_calculate_open_loop_voltages: apc0_cbf_corner: fused MinSVS: CBF offset open-loop= 535000 uV
329<6>[ 0.307013]@0 cpr3_msm8996_hmss_calculate_open_loop_voltages: apc0_cbf_corner: fused LowSVS: CBF offset open-loop= 645000 uV
330<6>[ 0.307022]@0 cpr3_msm8996_hmss_calculate_open_loop_voltages: apc0_cbf_corner: fused SVS: CBF offset open-loop= 645000 uV
331<6>[ 0.307030]@0 cpr3_msm8996_hmss_calculate_open_loop_voltages: apc0_cbf_corner: fused NOM: CBF offset open-loop= 755000 uV
332<6>[ 0.307038]@0 cpr3_msm8996_hmss_calculate_open_loop_voltages: apc0_cbf_corner: fused TURBO: CBF offset open-loop= 890000 uV
333<6>[ 0.307088]@0 cpr3_msm8996_hmss_calculate_target_quotients: apc0_cbf_corner: fused MinSVS: quot[ 7]= 269
334<6>[ 0.307097]@0 cpr3_msm8996_hmss_calculate_target_quotients: apc0_cbf_corner: fused SVS: quot[ 7]= 417, quot_offset[ 7]= 105
335<6>[ 0.307107]@0 cpr3_msm8996_hmss_calculate_target_quotients: apc0_cbf_corner: fused NOM: quot[ 7]= 642, quot_offset[ 7]= 225
336<6>[ 0.307116]@0 cpr3_msm8996_hmss_calculate_target_quotients: apc0_cbf_corner: fused TURBO: quot[ 7]= 988, quot_offset[ 7]= 345
337<6>[ 0.307253]@0 cpr3_msm8996_hmss_read_fuse_data: apc1_corner: speed bin = 0
338<6>[ 0.307263]@0 cpr3_msm8996_hmss_read_fuse_data: apc1_corner: CPR fusing revision = 2
339<6>[ 0.307272]@0 cpr3_msm8996_hmss_read_fuse_data: apc1_corner: using redundant fuses = N
340<6>[ 0.307282]@0 cpr3_msm8996_hmss_read_fuse_data: apc1_corner: CPR limitation = none
341<6>[ 0.307291]@0 cpr3_msm8996_hmss_read_fuse_data: apc1_corner: CPR partial binning limitation = none
342<6>[ 0.307302]@0 cpr3_msm8996_hmss_read_fuse_data: apc1_corner: Retention voltage fuses: VDD_MX = 4, VDD_APCC = 4
343<6>[ 0.307542]@0 cpr3_hmss_kvreg_init: apc1_corner: LDO min headroom=130000 uV, LDO max headroom=470000 uV, LDO adj=0 uV, LDO mode=allowed, LDO retention=490000 uV
344<6>[ 0.307810]@0 cpr3_msm8996_hmss_calculate_open_loop_voltages: apc1_corner: fused MinSVS: open-loop= 575000 uV
345<6>[ 0.307822]@0 cpr3_msm8996_hmss_calculate_open_loop_voltages: apc1_corner: fused SVS: open-loop= 655000 uV
346<6>[ 0.307831]@0 cpr3_msm8996_hmss_calculate_open_loop_voltages: apc1_corner: fused NOM: open-loop= 745000 uV
347<6>[ 0.307839]@0 cpr3_msm8996_hmss_calculate_open_loop_voltages: apc1_corner: fused TURBO: open-loop=1040000 uV
348<6>[ 0.308000]@0 cpr3_msm8996_hmss_calculate_target_quotients: apc1_corner: fused MinSVS: quot[ 7]= 291
349<6>[ 0.308009]@0 cpr3_msm8996_hmss_calculate_target_quotients: apc1_corner: fused SVS: quot[ 7]= 440, quot_offset[ 7]= 105
350<6>[ 0.308020]@0 cpr3_msm8996_hmss_calculate_target_quotients: apc1_corner: fused NOM: quot[ 7]= 643, quot_offset[ 7]= 200
351<6>[ 0.308029]@0 cpr3_msm8996_hmss_calculate_target_quotients: apc1_corner: fused TURBO: quot[ 7]=1247, quot_offset[ 7]= 600
352<6>[ 0.308595]@0 cpr3_regulator_init_ctrl: apcc: Default CPR mode = SW closed-loop
353<6>apc0_pwrcl_corner: 0 <--> 0 mV at 0 mV
354<6>[ 0.308954]@0 apc0_cbf_corner: 0 <--> 0 mV at 0 mV
355<6>[ 0.311881]@0 cpr3_regulator_measure_aging: apcc: average quotient delta=-1 (count=10)
356<6>[ 0.311917]@0 cpr3_regulator_aging_adjust: apcc: aging measurement successful; aging reference adjustment voltage=1562 uV
357<6>[ 0.312277]@0 apc1_corner: 0 <--> 0 mV at 0 mV
358<6>[ 0.313913]@0 cpr3_msm8996_mmss_read_fuse_data: gfx_corner: speed bin = 0
359<6>[ 0.313935]@0 cpr3_msm8996_mmss_read_fuse_data: gfx_corner: CPR fusing revision = 1
360<6>[ 0.313945]@0 cpr3_msm8996_mmss_read_fuse_data: gfx_corner: CPR limitation = none
361<6>[ 0.314331]@0 cpr3_msm8996_mmss_calculate_open_loop_voltages: gfx_corner: fuse_corner[0] open-loop= 620000 uV
362<6>[ 0.314341]@0 cpr3_msm8996_mmss_calculate_open_loop_voltages: gfx_corner: fuse_corner[1] open-loop= 675000 uV
363<6>[ 0.314350]@0 cpr3_msm8996_mmss_calculate_open_loop_voltages: gfx_corner: fuse_corner[2] open-loop= 805000 uV
364<6>[ 0.314359]@0 cpr3_msm8996_mmss_calculate_open_loop_voltages: gfx_corner: fuse_corner[3] open-loop= 935000 uV
365<6>[ 0.314548]@0 cpr3_regulator_init_ctrl: gfx: Default CPR mode = closed-loop
366<6>gfx_corner: 0 <--> 0 mV at 0 mV
367<6>[ 0.316326]@0 i2c-msm-v2 75ba000.i2c: probing driver i2c-msm-v2
368<3>[ 0.316444]@0 AXI: msm_bus_scale_register_client(): msm_bus_scale_register_client: Bus driver not ready.
369<6>i2c-msm-v2 75ba000.i2c: msm_bus_scale_register_client(mstr-id:84):0 (not a problem)
370<6>i2c-msm-v2 757a000.i2c: probing driver i2c-msm-v2
371<3>[ 0.317571]@0 AXI: msm_bus_scale_register_client(): msm_bus_scale_register_client: Bus driver not ready.
372<6>i2c-msm-v2 757a000.i2c: msm_bus_scale_register_client(mstr-id:86):0 (not a problem)
373<6>i2c-msm-v2 75b5000.i2c: probing driver i2c-msm-v2
374<3>[ 0.318703]@0 AXI: msm_bus_scale_register_client(): msm_bus_scale_register_client: Bus driver not ready.
375<6>i2c-msm-v2 75b5000.i2c: msm_bus_scale_register_client(mstr-id:84):0 (not a problem)
376<6>i2c-msm-v2 7577000.i2c: probing driver i2c-msm-v2
377<3>[ 0.319861]@0 AXI: msm_bus_scale_register_client(): msm_bus_scale_register_client: Bus driver not ready.
378<6>i2c-msm-v2 7577000.i2c: msm_bus_scale_register_client(mstr-id:86):0 (not a problem)
379<6>i2c-msm-v2 75b6000.i2c: probing driver i2c-msm-v2
380<3>[ 0.320986]@0 AXI: msm_bus_scale_register_client(): msm_bus_scale_register_client: Bus driver not ready.
381<6>i2c-msm-v2 75b6000.i2c: msm_bus_scale_register_client(mstr-id:84):0 (not a problem)
382<6>cpu-clock-8996 6400000.qcom,cpu-clock-8996: using perf/pwr/cbf speed bin 0 and pvs_ver 0
383<6>[ 0.324257]@0 clock-cpu-8996: set OPP pair (307200000 Hz, 615000 uv) on cpu0
384<6>[ 0.324308]@0 clock-cpu-8996: set OPP pair (2188800000 Hz, 1085000 uv) on cpu0
385<6>[ 0.324326]@0 clock-cpu-8996: set OPP pair (307200000 Hz, 615000 uv) on cpu1
386<6>[ 0.324365]@0 clock-cpu-8996: set OPP pair (2188800000 Hz, 1085000 uv) on cpu1
387<6>[ 0.324383]@0 clock-cpu-8996: set OPP pair (307200000 Hz, 625000 uv) on cpu2
388<6>[ 0.324439]@0 clock-cpu-8996: set OPP pair (2342400000 Hz, 1075000 uv) on cpu2
389<6>[ 0.324494]@0 clock-cpu-8996: set OPP pair (307200000 Hz, 625000 uv) on cpu3
390<6>[ 0.324681]@0 clock-cpu-8996: set OPP pair (2342400000 Hz, 1075000 uv) on cpu3
391<6>[ 0.324824]@0 clock-cpu-8996: set OPP pair (192000000 Hz, 600000 uv) on soc:qcom,m4m
392<6>[ 0.324891]@0 clock-cpu-8996: set OPP pair (1593600000 Hz, 955000 uv) on soc:qcom,m4m
393<6>[ 0.325386]@0 qcom,gpucc-8996 8c0000.qcom,gpucc: using speed bin 0
394<6>[ 0.325860]@0 gfx3d_clk_src_v2: set OPP pair(133000000 Hz: 550000 uV) on b00000.qcom,kgsl-3d0
395<6>[ 0.325908]@0 gfx3d_clk_src_v2: set OPP pair(652800000 Hz: 910000 uV) on b00000.qcom,kgsl-3d0
396<6>[ 0.327371]@0 qcom,gpucc-8996 8c0000.qcom,gpucc: Registered GPU clocks.
397<6>[ 0.327632]@0 pmi8994_boost_5v: no parameters
398<3>[ 0.327765]@0 qcom,rpm-smd-regulator soc:qcom,rpm-smd:rpm-regulator-bstb:regulator-bst: Failed to find supply parent
399<3>[ 0.327874]@0 rpm_vreg_device_probe: regulator_register failed: pmi8994_boost_5v, rc=-517
400<6>[ 0.328125]@0 pmi8994_boost_pin_ctrl: no parameters
401<3>[ 0.328211]@0 qcom,rpm-smd-regulator soc:qcom,rpm-smd:rpm-regulator-bstb:regulator-bst-pin-ctrl: Failed to find supply parent
402<3>[ 0.328303]@0 rpm_vreg_device_probe: regulator_register failed: pmi8994_boost_pin_ctrl, rc=-517
403<6>[ 0.329212]@0 msm-thermal 70000.qcom,msm-thermal: msm_thermal:Failed reading node=/soc/qcom,msm-thermal, key=qcom,rpm-phase-resource-type err=-22. KTM continues
404<6>[ 0.329240]@0 msm-thermal 70000.qcom,msm-thermal: msm_thermal:Failed reading node=/soc/qcom,msm-thermal, key=qcom,gfx-sensor-id. err=-22. KTM continues
405<6>[ 0.329252]@0 msm_thermal:sensor_mgr_init_threshold threshold id already initialized
406<6>[ 0.329266]@0 msm-thermal 70000.qcom,msm-thermal: probe_vdd_mx:Failed reading node=/soc/qcom,msm-thermal, key=qcom,mx-restriction-temp. KTM continues
407<6>[ 0.329282]@0 msm-thermal 70000.qcom,msm-thermal: probe_psm:Failed reading node=/soc/qcom,msm-thermal, key=qcom,pmic-sw-mode-temp. err=-22. KTM continues
408<3>[ 0.329609]@0 msm_thermal:update_cpu_freq Unable to update policy for cpu:0. err:-19
409<3>[ 0.329625]@0 msm_thermal:update_cpu_freq Unable to update policy for cpu:2. err:-19
410<3>[ 0.329636]@0 msm_thermal:update_cpu_freq Unable to update policy for cpu:2. err:-19
411<3>[ 0.329656]@0 msm-thermal 70000.qcom,msm-thermal: probe_ocr:Failed reading node=/soc/qcom,msm-thermal, key=qcom,pmic-opt-curr-temp err:-22. KTM continues
412<3>[ 0.330724]@0 msm_thermal:update_cpu_freq Unable to update policy for cpu:0. err:-19
413<3>[ 0.330784]@0 msm_thermal:update_cpu_freq Unable to update policy for cpu:2. err:-19
414<3>[ 0.330796]@0 msm_thermal:update_cpu_freq Unable to update policy for cpu:2. err:-19
415<6>[ 0.330940]@2 pmi8994_boost_5v: no parameters
416<3>[ 0.331039]@2 qcom,rpm-smd-regulator soc:qcom,rpm-smd:rpm-regulator-bstb:regulator-bst: Failed to find supply parent
417<3>[ 0.331136]@2 rpm_vreg_device_probe: regulator_register failed: pmi8994_boost_5v, rc=-517
418<6>[ 0.331328]@2 pmi8994_boost_pin_ctrl: no parameters
419<3>[ 0.331377]@2 qcom,rpm-smd-regulator soc:qcom,rpm-smd:rpm-regulator-bstb:regulator-bst-pin-ctrl: Failed to find supply parent
420<3>[ 0.331464]@2 rpm_vreg_device_probe: regulator_register failed: pmi8994_boost_pin_ctrl, rc=-517
421<6>[ 0.373969]@2 KPI: Bootloader start count = 32762
422<6>[ 0.373986]@2 KPI: Bootloader end count = 242017
423<6>[ 0.373995]@2 KPI: Bootloader display count = 224076
424<6>[ 0.374002]@2 KPI: Bootloader load kernel count = 2207
425<6>[ 0.374012]@2 KPI: Kernel MPM timestamp = 267635
426<6>[ 0.374019]@2 KPI: Kernel MPM Clock frequency = 32768
427<6>[ 0.374033]@2 socinfo_print: v0.11, id=305, ver=1.1, raw_id=95, raw_ver=1, hw_plat=8, hw_plat_ver=65536
428<6> accessory_chip=0, hw_plat_subtype=0, pmic_model=65545, pmic_die_revision=131072 foundry_id=3 serial_number=82829733 num_pmics=2
429<3>[ 0.374067]@2 init_project_info: project_name: 15811 hw_version: 28 rf_v1: 22 rf_v2: 1: rf_v3: 0 paltform_id:305
430<3>[ 0.374081]@2 init_project_info: aboard_version: 1
431<3>[ 0.374972]@2 op_rf_cable_probe: ftm_mode FOUND! use 1 always
432<3>[ 0.374989]@2 modify_rf_cable_smem_info: rf_cable: 1
433<3>[ 0.374997]@2 op_rf_cable_probe: probe ok!
434<6>[ 0.375359]@2 gdsc_mmagic_bimc: no parameters
435<6>[ 0.375956]@2 rome_vreg: no parameters
436<6>[ 0.376199]@2 wlan_en_vreg: no parameters
437<6>[ 0.376782]@2 vgaarb: loaded
438<5>[ 0.377013]@2 SCSI subsystem initialized
439<6>[ 0.377189]@2 usbcore: registered new interface driver usbfs
440<6>[ 0.377229]@2 usbcore: registered new interface driver hub
441<6>[ 0.377389]@1 usbcore: registered new device driver usb
442<4>[ 0.377840]@1 soc:usb_nop_phy supply vcc not found, using dummy regulator
443<6>[ 0.420346]@1 cpufreq: driver msm up and running
444<6>[ 0.421197]@1 platform soc:qcom,ion:qcom,ion-heap@22: assigned reserved memory node adsp_region
445<6>[ 0.421846]@1 platform soc:qcom,ion:qcom,ion-heap@27: assigned reserved memory node qseecom_region
446<6>[ 0.422308]@1 platform soc:qcom,ion:qcom,ion-heap@10: assigned reserved memory node secure_region
447<6>[ 0.422920]@1 ION heap system created
448<3>[ 0.423133]@1 ion_heap_create: Heap type is disabled: 1
449<3>[ 0.423138]@1 msm_ion_heap_create: error creating heap kmalloc type 1 base 0x0000000000000000 size 0
450<6>[ 0.423145]@1 ION heap adsp created at 0x00000000ff800000 with size 400000
451<6>[ 0.423153]@1 ION heap qsecom created at 0x00000000fe400000 with size 1400000
452<6>[ 0.423161]@1 ION heap secure_display created at 0x00000000f8800000 with size 5c00000
453<6>[ 0.423170]@1 ION heap secure_heap created
454<3>[ 0.424169]@1 msm_bus_fabric_init_driver
455<3>[ 0.426919]@1 msm-bus-type fab-a0noc: Error: Failed to get regulator bus-gdsc:-517
456<3>[ 0.426937]@1 msm-bus-type fab-a0noc: Error: Failed to get regulator bus-a-gdsc:-517
457<3>[ 0.429578]@1 msm-bus-type slv-vmem-cfg: Error: Failed to get regulator node-gdsc:-517
458<3>[ 0.430006]@1 msm-bus-type slv-vmem: Error: Failed to get regulator node-gdsc:-517
459<3>[ 0.435083]@2 msm-bus-type fab-a0noc: Error: Failed to get regulator aggre0-snoc-axi-no-rate:-517
460<3>[ 0.435096]@2 msm-bus-type fab-a0noc: Error: Failed to get regulator aggre0-snoc-axi-no-rate:-517
461<3>[ 0.435105]@2 msm-bus-type fab-a0noc: Error: Failed to get regulator aggre0-snoc-axi-no-rate:-517
462<3>[ 0.435203]@2 msm-bus-type fab-mnoc: Error: Failed to get regulator mmagic-mdss-axi-no-rate:-517
463<3>[ 0.435224]@2 msm-bus-type fab-mnoc: Error: Failed to get regulator mmagic-mdss-axi-no-rate:-517
464<3>[ 0.435242]@2 msm-bus-type fab-mnoc: Error: Failed to get regulator mmagic-mdss-axi-no-rate:-517
465<3>[ 0.435260]@2 msm-bus-type fab-mnoc: Error: Failed to get regulator mmagic-mdss-axi-no-rate:-517
466<3>[ 0.435277]@2 msm-bus-type fab-mnoc: Error: Failed to get regulator mmagic-mdss-axi-no-rate:-517
467<3>[ 0.435295]@2 msm-bus-type fab-mnoc: Error: Failed to get regulator mmagic-mdss-axi-no-rate:-517
468<3>[ 0.435312]@2 msm-bus-type fab-mnoc: Error: Failed to get regulator mmagic-mdss-axi-no-rate:-517
469<6>[ 0.436536]@2 qcom,qpnp-power-on qpnp-power-on-2: PMIC@SID0 Power-on reason: Triggered from Hard Reset[0x21] and 'cold' boot
470<6>[ 0.436546]@2 qcom,qpnp-power-on qpnp-power-on-2: PMIC@SID0 Power-on reason: Triggered from PON1 (secondary PMIC)[0x21] and 'cold' boot
471<6>[ 0.436562]@2 qcom,qpnp-power-on qpnp-power-on-2: PMIC@SID0: Power-off reason: Triggered from PS_HOLD (PS_HOLD/MSM controlled shutdown)[0x2]
472<6>[ 0.436669]@2 input: qpnp_pon as /devices/virtual/input/input0
473<6>[ 0.437127]@2 pon_spare_reg: no parameters
474<6>[ 0.437170]@2 qcom,qpnp-power-on qpnp-power-on-11: No PON config. specified
475<6>[ 0.437225]@2 qcom,qpnp-power-on qpnp-power-on-11: PMIC@SID2 Power-on reason: Triggered from Hard Reset[0x31] and 'cold' boot
476<6>[ 0.437230]@2 qcom,qpnp-power-on qpnp-power-on-11: PMIC@SID2 Power-on reason: Triggered from USB (USB charger insertion)[0x31] and 'cold' boot
477<6>[ 0.437235]@2 qcom,qpnp-power-on qpnp-power-on-11: PMIC@SID2 Power-on reason: Triggered from PON1 (secondary PMIC)[0x31] and 'cold' boot
478<6>[ 0.437250]@2 qcom,qpnp-power-on qpnp-power-on-11: PMIC@SID2: Power-off reason: Triggered from PS_HOLD (PS_HOLD/MSM controlled shutdown)[0x2]
479<6>[ 0.437400]@2 PMIC@SID0: PM8994 v2.0 options: 0, 0, 2, 2
480<6>[ 0.437482]@2 PMIC@SID2: PMI8996 v1.1 options: 0, 0, 0, 0
481<3>[ 0.438503]@2 ipa ipa2_uc_state_check:296 uC interface not initialized
482<3>[ 0.438516]@2 ipa ipa_sps_irq_control_all:938 EP (2) not allocated.
483<3>[ 0.438521]@2 ipa ipa_sps_irq_control_all:938 EP (5) not allocated.
484<6>[ 0.440514]@3 sps:BAM 0x0000000000684000 is registered.
485<3>ipa ipa2_uc_state_check:296 uC interface not initialized
486<6>[ 0.441419]@3 sps:BAM 0x0000000000684000 (va:0xffffff80020c0000) enabled: ver:0x27, number of pipes:20
487<3>[ 0.442729]@3 ipa ipa2_uc_state_check:296 uC interface not initialized
488<3>[ 0.447575]@3 ipa ipa2_uc_state_check:296 uC interface not initialized
489<6>[ 0.449121]@3 IPA driver initialization was successful.
490<6>[ 0.450411]@3 gdsc_mmagic_video: no parameters
491<6>[ 0.450613]@3 gdsc_mmagic_mdss: no parameters
492<6>[ 0.450761]@3 gdsc_mmagic_camss: no parameters
493<6>[ 0.450947]@3 gdsc_venus: no parameters
494<6>[ 0.450966]@3 gdsc_venus: supplied by gdsc_mmagic_video
495<6>[ 0.451140]@3 gdsc_venus_core0: fast normal
496<6>[ 0.451269]@3 gdsc_venus_core1: fast normal
497<6>[ 0.451420]@3 gdsc_camss_top: no parameters
498<6>[ 0.451438]@3 gdsc_camss_top: supplied by gdsc_mmagic_camss
499<6>[ 0.451590]@3 gdsc_vfe0: no parameters
500<6>[ 0.451606]@3 gdsc_vfe0: supplied by gdsc_camss_top
501<6>[ 0.451759]@3 gdsc_vfe1: no parameters
502<6>[ 0.451776]@3 gdsc_vfe1: supplied by gdsc_camss_top
503<6>[ 0.451930]@3 gdsc_mdss: no parameters
504<6>[ 0.451947]@3 gdsc_mdss: supplied by gdsc_mmagic_mdss
505<6>[ 0.452176]@3 gdsc_jpeg: no parameters
506<6>[ 0.452192]@3 gdsc_jpeg: supplied by gdsc_camss_top
507<6>[ 0.452343]@3 gdsc_cpp: no parameters
508<6>[ 0.452359]@3 gdsc_cpp: supplied by gdsc_camss_top
509<6>[ 0.452484]@3 gdsc_pcie_0: no parameters
510<6>[ 0.452619]@3 gdsc_pcie_1: no parameters
511<6>[ 0.452737]@3 gdsc_pcie_2: no parameters
512<6>[ 0.452859]@3 gdsc_usb30: no parameters
513<6>[ 0.452991]@3 gdsc_ufs: no parameters
514<6>[ 0.453168]@3 gdsc_fd: no parameters
515<6>[ 0.453187]@3 gdsc_fd: supplied by gdsc_camss_top
516<6>[ 0.453320]@3 gdsc_gpu: no parameters
517<6>[ 0.453489]@3 gdsc_gpu_gx: no parameters
518<6>[ 0.453851]@3 gdsc_gpu_gx: supplied by gfx_corner
519<6>[ 0.454008]@3 gdsc_hlos1_vote_aggre0_noc: no parameters
520<6>[ 0.454136]@3 gdsc_hlos1_vote_lpass_adsp: no parameters
521<6>[ 0.454253]@3 gdsc_hlos1_vote_lpass_core: no parameters
522<6>[ 0.454398]@3 gdsc_aggre0_noc: no parameters
523<6>[ 0.456526]@3 mdss_pll_probe: MDSS pll label = MDSS DSI 0 PLL
524<6>[ 0.456546]@3 mdss_pll_probe: mdss_pll_probe: label=MDSS DSI 0 PLL PLL SSC enabled
525<6>[ 0.458302]@3 dsi_pll_clock_register_8996: Registered DSI PLL ndx=0 clocks successfully
526<6>[ 0.458375]@3 mdss_pll_probe: MDSS pll label = MDSS DSI 1 PLL
527<6>[ 0.458384]@3 mdss_pll_probe: mdss_pll_probe: label=MDSS DSI 1 PLL PLL SSC enabled
528<3>[ 0.459458]@3 pll_is_pll_locked_8996: DSI PLL ndx=1 status=0 failed to Lock
529<6>[ 0.459892]@3 dsi_pll_clock_register_8996: Registered DSI PLL ndx=1 clocks successfully
530<6>[ 0.566002]@3 get_param_by_index_and_offset[75] sid_index = 12 offset = 0 buf = ffffffc0016932b8 length = 420
531<6>[ 0.566126]@3 Advanced Linux Sound Architecture Driver Initialized.
532<1>[ 0.566664]@3 pcie:pcie_init.
533<4>[ 0.570188]@3 600000.qcom,pcie supply vreg-3.3 not found, using dummy regulator
534<3>[ 0.572799]@3 msm_pcie_get_resources: PCIe: RC0 can't get tcsr resource.
535<6>[ 0.575522]@1 pmi8994_boost_5v: no parameters
536<6>[ 0.575805]@1 pmi8994_boost_5v: supplied by pon_spare_reg
537<6>[ 0.576292]@1 pmi8994_boost_pin_ctrl: no parameters
538<6>[ 0.576507]@1 pmi8994_boost_pin_ctrl: supplied by pon_spare_reg
539<6>[ 0.577053]@3 Switched to clocksource arch_sys_counter
540<6>[ 0.578012]@3 bcl_peripheral:bcl_perph_init BCL Initialized
541<6>[ 0.582285]@3 NET: Registered protocol family 2
542<6>[ 0.582799]@3 TCP established hash table entries: 65536 (order: 7, 524288 bytes)
543<6>[ 0.582949]@3 TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
544<6>[ 0.583863]@3 TCP: Hash tables configured (established 65536 bind 65536)
545<6>[ 0.584042]@3 TCP: reno registered
546<6>[ 0.584083]@3 UDP hash table entries: 4096 (order: 5, 131072 bytes)
547<6>[ 0.584175]@3 UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes)
548<6>[ 0.584580]@3 NET: Registered protocol family 1
549<7>[ 0.584648]@3 PCI: CLS 0 bytes, default 128
550<6>[ 0.585198]@3 Trying to unpack rootfs image as initramfs...
551<6>[ 0.753386]@3 Freeing initrd memory: 8912K (ffffffc002200000 - ffffffc002ab4000)
552<6>[ 0.755223]@3 kryo perfevents: CPU pmu for kryo-pmuv3 detected
553<6>[ 0.760299]@3 futex hash table entries: 1024 (order: 5, 131072 bytes)
554<6>[ 0.760449]@3 audit: initializing netlink subsys (disabled)
555<5>[ 0.760559]@3 audit: type=2000 audit(0.759:1): initialized
556<4>[ 0.761070]@3 vmscan: error setting kswapd cpu affinity mask
557<6>[ 0.764043]@3 exfat: init_exfat_fs: exFAT Filesystem version 1.2.24
558<6>[ 0.764115]@3 fuse init (API version 7.23)
559<6>[ 0.765848]@3 Block layer SCSI generic (bsg) driver version 0.4 loaded (major 247)
560<6>[ 0.765873]@3 io scheduler noop registered (default)
561<3>[ 0.776014]@3 mdss_mdp_irq_clk_register: unable to get clk: lut_clk
562<3>[ 0.777275]@3 No change in context(0==0), skip
563<6>[ 0.778355]@3 mdss_mdp_pipe_addr_setup: type:0 ftchid:-1 xinid:0 num:0 rect:0 ndx:0x1 prio:0
564<6>[ 0.778366]@3 mdss_mdp_pipe_addr_setup: type:0 ftchid:-1 xinid:4 num:1 rect:0 ndx:0x2 prio:1
565<6>[ 0.778372]@3 mdss_mdp_pipe_addr_setup: type:0 ftchid:-1 xinid:8 num:2 rect:0 ndx:0x4 prio:2
566<6>[ 0.778378]@3 mdss_mdp_pipe_addr_setup: type:0 ftchid:-1 xinid:12 num:8 rect:0 ndx:0x100 prio:3
567<6>[ 0.778394]@3 mdss_mdp_pipe_addr_setup: type:1 ftchid:-1 xinid:1 num:3 rect:0 ndx:0x8 prio:4
568<6>[ 0.778400]@3 mdss_mdp_pipe_addr_setup: type:1 ftchid:-1 xinid:5 num:4 rect:0 ndx:0x10 prio:5
569<6>[ 0.778406]@3 mdss_mdp_pipe_addr_setup: type:1 ftchid:-1 xinid:9 num:5 rect:0 ndx:0x20 prio:6
570<6>[ 0.778413]@3 mdss_mdp_pipe_addr_setup: type:1 ftchid:-1 xinid:13 num:9 rect:0 ndx:0x200 prio:7
571<6>[ 0.778425]@3 mdss_mdp_pipe_addr_setup: type:2 ftchid:-1 xinid:2 num:6 rect:0 ndx:0x40 prio:8
572<6>[ 0.778431]@3 mdss_mdp_pipe_addr_setup: type:2 ftchid:-1 xinid:10 num:7 rect:0 ndx:0x80 prio:9
573<6>[ 0.778443]@3 mdss_mdp_pipe_addr_setup: type:3 ftchid:-1 xinid:7 num:10 rect:0 ndx:0x400 prio:0
574<6>[ 0.778449]@3 mdss_mdp_pipe_addr_setup: type:3 ftchid:-1 xinid:7 num:11 rect:0 ndx:0x800 prio:1
575<3>[ 0.778460]@3 mdss_mdp_parse_dt_handler: Error from prop qcom,mdss-pipe-sw-reset-off : u32 array read
576<3>[ 0.778526]@3 mdss_mdp_parse_dt_handler: Error from prop qcom,mdss-ib-factor-overlap : u32 array read
577<6>[ 0.778857]@3 xlog_status: enable:0, panic:0, dump:1
578<6>[ 0.780000]@3 mdss_mdp_probe: mdss version = 0x10070002, bootloader display is on, num 1, intf_sel=0x00000100
579<6>[ 0.784551]@3 mdss_smmu_probe: iommu v2 domain[0] mapping and clk register successful!
580<6>[ 0.784709]@3 mdss_smmu_probe: iommu v2 domain[1] mapping and clk register successful!
581<6>[ 0.784818]@3 mdss_smmu_probe: iommu v2 domain[2] mapping and clk register successful!
582<6>[ 0.784923]@3 mdss_smmu_probe: iommu v2 domain[3] mapping and clk register successful!
583<6>[ 0.787804]@3 mdss_dsi_ctrl_probe: DSI Ctrl name = MDSS DSI CTRL->0
584<6>[ 0.788133]@3 mdss_dsi_find_panel_of_node: cmdline:0:qcom,mdss_dsi_samsung_s6e3fa5_1080p_cmd:1:none:cfg:single_dsi panel_name:qcom,mdss_dsi_samsung_s6e3fa5_1080p_cmd
585<6>[ 0.788150]@3 mdss_dsi_panel_init: Panel Name = samsung s6e3fa5 1080p cmd mode dsi panel
586<6>[ 0.788242]@3 mdss_dsi_panel_timing_from_dt: found new timing "qcom,mdss_dsi_samsung_s6e3fa5_1080p_cmd" (ffffffc1764bb490)
587<3>[ 0.788259]@3 mdss_dsi_parse_dcs_cmds: failed, key=qcom,mdss-dsi-timing-switch-command
588<4>[ 0.788265]@3 mdss_dsi_panel_get_dsc_cfg_np: cannot find dsc config node:
589<6>[ 0.788388]@3 mdss_dsi_parse_panel_features: partial_update_enabled=0
590<6>[ 0.788398]@3 mdss_dsi_parse_panel_features: ulps feature disabled
591<6>[ 0.788406]@3 mdss_dsi_parse_panel_features: ulps during suspend feature disabled
592<6>mdss_dsi_parse_dms_config: dynamic switch feature enabled: 0
593<6>[ 0.788442]@3 mdss_dsi_panel_init: Panel Manufacture = SAMSUNG
594<6>[ 0.788448]@3 mdss_dsi_panel_init: Panel Version = S6E3FA5
595<3>[ 0.788456]@3 high brightness panel: 1
596<3>[ 0.788835]@3 mdss_dsi_parse_ctrl_params:4006 Unable to read qcom,display-id, data=0000000000000000,len=20
597<6>[ 0.788872]@3 mdss_dsi_parse_gpio_params: bklt_en gpio not specified
598<3>[ 0.789103]@3 msm_dss_get_res_byname: 'dsi_phy_regulator' resource not found
599<3>[ 0.789110]@3 mdss_dsi_retrieve_ctrl_resources+0x15c/0x1b8->msm_dss_ioremap_byname: 'dsi_phy_regulator' msm_dss_get_res_byname failed
600<6>[ 0.789133]@3 mdss_dsi_retrieve_ctrl_resources: ctrl_base=ffffff80021dc000 ctrl_size=400 phy_base=ffffff80021de400 phy_size=588
601<6>[ 0.789286]@3 dsi_panel_device_register: Continuous splash enabled
602<6>[ 0.789877]@3 mdss_register_panel: adding framebuffer device 994000.qcom,mdss_dsi_ctrl0
603<6>[ 0.793218]@3 mdss_dsi_ctrl_probe: Dsi Ctrl->0 initialized, DSI rev:0x10040001, PHY rev:0x2
604<6>[ 0.794591]@3 mdss_dsi_status_init: DSI status check interval:5000
605<6>[ 0.795020]@3 mdss_register_panel: adding framebuffer device soc:qcom,mdss_wb_panel
606<6>[ 0.796626]@3 mdss_fb_probe: fb0: split_mode:0 left:0 right:0
607<6>[ 0.797118]@3 mdss_fb_register: FrameBuffer[0] 1080x1920 registered successfully!
608<6>[ 0.797927]@3 mdss_fb_probe: fb1: split_mode:0 left:0 right:0
609<6>[ 0.797995]@3 mdss_fb_register: FrameBuffer[1] 640x480 registered successfully!
610<3>[ 0.798050]@3 mdss_mdp_splash_parse_dt: splash mem child node is not present
611<6>[ 0.808227]@3 In memshare_probe, Memshare probe success
612<6>[ 0.813126]@3 l2cache-pmu soc:l2-pmu: Registered L2 cache PMU using 2 HW PMUs
613<5>[ 0.814046]@3 msm_rpm_log_probe: OK
614<6>[ 0.817768]@0 subsys-pil-tz ce0000.qcom,venus: for venus segments only will be dumped.
615<6>subsys-pil-tz soc:qcom,kgsl-hyp: for a530_zap segments only will be dumped.
616<3>uart_tx_gpio is not available
617<3>[ 0.821614]@2 uart_rx_gpio is not available
618<3>[ 0.821621]@2 uart_cts_gpio is not available
619<3>[ 0.821627]@2 uart_rfr_gpio is not available
620<3>[ 0.822445]@3 sps: BAM device 0x0000000007544000 is not registered yet.
621<6>[ 0.822589]@3 sps:BAM 0x0000000007544000 is registered.
622<3>smd_channel_probe_now: allocation table not initialized
623<6>[ 0.824121]@3 7570000.uart: ttyHS0 at MMIO 0x7570000 (irq = 20, base_baud = 460800) is a MSM HS UART
624<6>[ 0.826047]@3 msm_serial_hs module loaded
625<6>[ 0.826856]@3 msm_serial_hsl_probe: detected port #0 (ttyHSL0)
626<3>[ 0.826979]@3 AXI: get_pdata(): Error: Client name not found
627<3>[ 0.826988]@3 AXI: msm_bus_cl_get_pdata(): client has to provide missing entry for successful registration
628<3>[ 0.826995]@3 msm_serial_hsl_probe: Bus scaling is disabled
629<6>[ 0.827095]@3 75b0000.serial: ttyHSL0 at MMIO 0x75b0000 (irq = 12, base_baud = 460800) is a MSM
630<6>[ 0.827176]@3 msm_hsl_console_setup: console setup on port #0
631<6>[ 5.361333]@3 console [ttyHSL0] enabled
632<6>[ 5.366180]@3 msm_serial_hsl_init: driver initialized
633<6>[ 5.389816]@3 brd: module loaded
634<6>[ 5.393001]@3 loop: module loaded
635<6>[ 5.395402]@3 at24 6-0051: 4096 byte 24c32 EEPROM, writable, 1 bytes/write
636<6>[ 5.403127]@3 QSEECOM: qseecom_probe: qseecom.qsee_version = 0x1000000
637<4>[ 5.408717]@3 QSEECOM: qseecom_retrieve_ce_data: Device does not support PFE
638<6>QSEECOM: qseecom_probe: no-clock-support=0x1<4>QSEECOM: qseecom_probe: qseecom.qsee_reentrancy_support = 2
639<3>[ 5.425508]@3 scm_call failed: func id 0x70000006, ret: -2, syscall returns: 0xffffffffffffffed, 0x0, 0x0
640<4>[ 5.434405]@3 QSEECOM: qseecom_probe: qseecom.whitelist_support = 1
641<4>[ 5.441660]@3 i2c-core: driver [tusb320] using legacy suspend method
642<4>[ 5.446975]@3 i2c-core: driver [tusb320] using legacy resume method
643<4>[ 5.453286]@3 i2c-core: driver [fusb301] using legacy suspend method
644<4>[ 5.459561]@3 i2c-core: driver [fusb301] using legacy resume method
645<4>[ 5.465860]@3 i2c-core: driver [ptn5150] using legacy suspend method
646<4>[ 5.472157]@3 i2c-core: driver [ptn5150] using legacy resume method
647<3>[ 5.479997]@3 gpio_dev_probe
648<3>[ 5.481952]@3 i= 1 gpio=: 97
649<3>[ 5.484739]@3 i= 2 gpio=: 98
650<3>[ 5.487615]@3 i= 3 gpio=: 100
651<3>[ 5.490588]@3 i= 4 gpio=: 115
652<3>[ 5.493542]@3 i= 5 gpio=: 127
653<3>[ 5.496505]@3 i= 6 gpio=: 133
654<3>[ 5.499469]@3 i= 7 gpio=: 136
655<4>[ 5.502371]@3 gpio_pinctrl_init
656<4>[ 5.505925]@3 gpio_dev_probe ok!
657<6>[ 5.509052]@3 Loading pn544 driver
658<6>[ 5.512321]@3 Enter pn544_probe !!!
659<6>[ 5.515824]@3 pn544_parse_dt: 9, 94, 12, 1015 ,1018, 0
660<6>[ 5.520936]@3 successfully got regulator_s4
661<6>[ 5.525180]@3 successfully set regulator voltage_s4
662<6>[ 5.529849]@3 get BBCLK2!!!
663<6>[ 5.532674]@3 clk_prepare_enable. ret = 0
664<6>[ 5.536760]@3 pn544_probe : requesting IRQ 273
665<6>[ 5.541171]@3 pn544_probe pn544_dev->clk_gpio = 0
666<6>[ 5.545781]@3 pn544_probe : requesting IRQ 542
667<4>[ 5.550250]@3 ###clkreq_disable_irq###
668<4>i2c-core: driver [pn544] using legacy suspend method
669<4>[ 5.558581]@3 i2c-core: driver [pn544] using legacy resume method
670<6>[ 5.564686]@3 [NXP-P61] : Entry : p61_dev_init
671<6>[ 5.570491]@3 qce 660000.qcedev: Qualcomm Crypto 5.3.1 device found @0x660000
672<6>[ 5.576597]@3 qce 660000.qcedev: CE device = 0x0
673<6>, IO base, CE = 0xffffff8003780000
674<6>, Consumer (IN) PIPE 2, Producer (OUT) PIPE 3
675<6>IO base BAM = 0x (null)
676<6>BAM IRQ 156
677<6>Engines Availability = 0x2011053
678<6>[ 5.595898]@3 sps:BAM 0x0000000000644000 is registered.
679<6>sps:BAM 0x0000000000644000 (va:0xffffff8003800000) enabled: ver:0x27, number of pipes:16
680<6>[ 5.608952]@3 QCE50: qce_sps_init: Qualcomm MSM CE-BAM at 0x0000000000644000 irq 156
681<6>[ 5.624750]@3 qcrypto 660000.qcrypto: Qualcomm Crypto 5.3.1 device found @0x660000
682<6>[ 5.631390]@3 qcrypto 660000.qcrypto: CE device = 0x0
683<6>, IO base, CE = 0xffffff8003840000
684<6>, Consumer (IN) PIPE 4, Producer (OUT) PIPE 5
685<6>IO base BAM = 0x (null)
686<6>BAM IRQ 156
687<6>Engines Availability = 0x2011053
688<6>[ 5.651223]@3 QCE50: qce_sps_init: Qualcomm MSM CE-BAM at 0x0000000000644000 irq 156
689<6>[ 5.664808]@3 qcrypto 660000.qcrypto: qcrypto-ecb-aes
690<6>[ 5.668885]@3 qcrypto 660000.qcrypto: qcrypto-cbc-aes
691<6>[ 5.673941]@3 qcrypto 660000.qcrypto: qcrypto-ctr-aes
692<6>[ 5.678951]@3 qcrypto 660000.qcrypto: qcrypto-ecb-des
693<6>[ 5.684006]@3 qcrypto 660000.qcrypto: qcrypto-cbc-des
694<6>[ 5.689025]@3 qcrypto 660000.qcrypto: qcrypto-ecb-3des
695<6>[ 5.694153]@3 qcrypto 660000.qcrypto: qcrypto-cbc-3des
696<6>[ 5.699261]@3 qcrypto 660000.qcrypto: qcrypto-xts-aes
697<6>[ 5.704309]@3 qcrypto 660000.qcrypto: qcrypto-sha1
698<6>[ 5.709068]@3 qcrypto 660000.qcrypto: qcrypto-sha256
699<6>[ 5.714032]@3 qcrypto 660000.qcrypto: qcrypto-aead-hmac-sha1-cbc-aes
700<6>[ 5.720368]@3 qcrypto 660000.qcrypto: qcrypto-aead-hmac-sha1-cbc-des
701<6>[ 5.726692]@3 qcrypto 660000.qcrypto: qcrypto-aead-hmac-sha1-cbc-3des
702<6>[ 5.733126]@3 qcrypto 660000.qcrypto: qcrypto-aead-hmac-sha256-cbc-aes
703<6>[ 5.739628]@3 qcrypto 660000.qcrypto: qcrypto-aead-hmac-sha256-cbc-des
704<6>[ 5.746150]@3 qcrypto 660000.qcrypto: qcrypto-aead-hmac-sha256-cbc-3des
705<6>[ 5.752744]@3 qcrypto 660000.qcrypto: qcrypto-hmac-sha1
706<6>[ 5.757941]@3 qcrypto 660000.qcrypto: qcrypto-hmac-sha256
707<6>[ 5.763334]@3 qcrypto 660000.qcrypto: qcrypto-aes-ccm
708<6>[ 5.768357]@3 qcrypto 660000.qcrypto: qcrypto-rfc4309-aes-ccm
709<6>[ 5.776701]@3 ICE IRQ = 28
710<6>[ 5.782583]@3 qcom_ice_get_pdevice: found ice device ffffffc172c09e00
711<6>[ 5.788002]@3 qcom_ice_get_pdevice: matching platform device ffffffc175563400
712<3>[ 5.795639]@3 scm_call failed: func id 0x42000c02, ret: -2, syscall returns: 0xfffffffffffffffc, 0x0, 0x0
713<3>[ 5.805251]@3 ufs_qcom_phy_qmp_14nm 627000.ufsphy: failed to get tx_iface_clk err -2
714<3>ufs_qcom_phy_qmp_14nm 627000.ufsphy: failed to get rx_iface_clk err -2
715<6>scsi host0: ufshcd
716<6>[ 5.824130]@3 qcom_ice 630000.ufsice: QC ICE 2.1.44 device found @0xffffff8002890000
717<6>[ 5.851579]@3 SCSI Media Changer driver v0.25
718<6>[ 5.858670]@3 sps:BAM 0x0000000007544000 (va:0xffffff80025c0000) enabled: ver:0x19, number of pipes:24
719<6>[ 5.867228]@3 [NXP-P61] : p61_probe chip select : 1 , bus number = 0
720<3>[ 5.869238]@1 ufshcd 624000.ufshc: ufshcd_print_pwr_info:[RX, TX]: gear=[1, 1], lane[1, 1], pwr[SLOWAUTO_MODE, SLOWAUTO_MODE], rate = 0
721<6>[ 5.885823]@3 p61_parse_dt: 34, 21 0
722<6>[ 5.889171]@3 [NXP-P61] : Entry : p61_hw_setup
723<6>[ 5.893724]@3 [NXP-P61] : Exit : p61_hw_setup
724<6>[ 5.898207]@3 [NXP-P61] : Entry : p61_disable_irq
725<6>[ 5.902897]@3 [NXP-P61] : Exit : p61_disable_irq
726<6>[ 5.907573]@3 [NXP-P61] : Exit : p61_probe
727<6>[ 5.913342]@3 msm_sharedmem: sharedmem_register_qmi: qmi init successful
728<6>[ 5.921736]@2 msm_sharedmem: msm_sharedmem_probe: Device created for client 'rmtfs'
729<4>[ 5.932069]@2 7411000.qusb supply USB3_GDSC not found, using dummy regulator
730<3>[ 5.941229]@3 msm-dwc3 6a00000.ssusb: unable to get dbm device
731<6>[ 5.949175]@3 ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
732<6>[ 5.954924]@3 ehci-pci: EHCI PCI platform driver
733<6>[ 5.959504]@3 usbcore: registered new interface driver uas
734<6>[ 5.964945]@3 usbcore: registered new interface driver usb-storage
735<6>[ 5.971102]@3 usbcore: registered new interface driver ums-alauda
736<6>[ 5.977167]@3 usbcore: registered new interface driver ums-cypress
737<6>[ 5.983360]@3 usbcore: registered new interface driver ums-datafab
738<6>[ 5.989494]@3 usbcore: registered new interface driver ums_eneub6250
739<6>[ 5.995841]@3 usbcore: registered new interface driver ums-freecom
740<6>[ 6.002008]@3 usbcore: registered new interface driver ums-isd200
741<6>[ 6.008072]@3 usbcore: registered new interface driver ums-jumpshot
742<6>[ 6.014331]@3 usbcore: registered new interface driver ums-karma
743<6>[ 6.020320]@3 usbcore: registered new interface driver ums-onetouch
744<6>[ 6.026559]@3 usbcore: registered new interface driver ums-realtek
745<6>[ 6.032735]@3 usbcore: registered new interface driver ums-sddr09
746<6>[ 6.038798]@3 usbcore: registered new interface driver ums-sddr55
747<6>[ 6.044885]@3 usbcore: registered new interface driver ums-usbat
748<3>[ 6.049562]@1 ufshcd 624000.ufshc: ufshcd_print_pwr_info:[RX, TX]: gear=[3, 3], lane[1, 1], pwr[FAST MODE, FAST MODE], rate = 2
749<5>[ 6.050109]@1 scsi 0:0:0:49488: Well-known LUN SAMSUNG KLUCG4J1CB-B0B1 0800 PQ: 0 ANSI: 6
750<5>[ 6.051152]@1 scsi 0:0:0:49456: Well-known LUN SAMSUNG KLUCG4J1CB-B0B1 0800 PQ: 0 ANSI: 6
751<5>[ 6.051910]@1 scsi 0:0:0:49476: Well-known LUN SAMSUNG KLUCG4J1CB-B0B1 0800 PQ: 0 ANSI: 6
752<4>[ 6.052496]@1 ufs_get_capacity_info size = 0x7734000
753<5>scsi 0:0:0:0: Direct-Access SAMSUNG KLUCG4J1CB-B0B1 0800 PQ: 0 ANSI: 6
754<5>[ 6.053566]@0 scsi 0:0:0:1: Direct-Access SAMSUNG KLUCG4J1CB-B0B1 0800 PQ: 0 ANSI: 6
755<5>[ 6.053968]@0 scsi 0:0:0:2: Direct-Access SAMSUNG KLUCG4J1CB-B0B1 0800 PQ: 0 ANSI: 6
756<5>[ 6.054362]@0 scsi 0:0:0:3: Direct-Access SAMSUNG KLUCG4J1CB-B0B1 0800 PQ: 0 ANSI: 6
757<5>[ 6.054756]@0 scsi 0:0:0:4: Direct-Access SAMSUNG KLUCG4J1CB-B0B1 0800 PQ: 0 ANSI: 6
758<5>[ 6.055145]@0 scsi 0:0:0:5: Direct-Access SAMSUNG KLUCG4J1CB-B0B1 0800 PQ: 0 ANSI: 6
759<5>[ 6.056005]@1 sd 0:0:0:0: [sda] 16384-byte physical blocks
760<5>[ 6.056401]@2 sd 0:0:0:1: [sdb] 16384-byte physical blocks
761<5>[ 6.058601]@1 sd 0:0:0:3: [sdd] 16384-byte physical blocks
762<5>[ 6.058603]@0 sd 0:0:0:2: [sdc] 16384-byte physical blocks
763<5>[ 6.059058]@0 sd 0:0:0:4: [sde] 16384-byte physical blocks
764<5>[ 6.059485]@1 sd 0:0:0:5: [sdf] 16384-byte physical blocks
765<6>[ 6.061999]@2 sdb: sdb1
766<6>[ 6.062352]@0 sda: sda1 sda2 sda3 sda4 sda5 sda6 sda7 sda8 sda9 sda10 sda11 sda12 sda13 sda14 sda15
767<6>[ 6.066433]@2 sdd: sdd1 sdd2 sdd3
768<6>[ 6.066972]@2 sde: sde1 sde2 sde3 sde4 sde5 sde6 sde7 sde8 sde9 sde10 sde11 sde12 sde13 sde14 sde15 sde16 sde17 sde18 sde19 sde20 sde21 sde22 sde23 sde24 sde25 sde26 sde27 sde28 sde29 sde30 sde31 sde32 sde33 sde34
769<6>[ 6.067051]@0 sdf: sdf1 sdf2 sdf3 sdf4
770<6>[ 6.067306]@2 sdc: sdc1
771<6>[ 6.214334]@3 usbcore: registered new interface driver usbserial
772<6>[ 6.220776]@3 gbridge_init: gbridge_init successs.
773<6>[ 6.225080]@3 mousedev: PS/2 mouse device common for all mice
774<3>[ 6.230822]@3 synaptics,s3320: tpd_driver_init enter
775<3>[ 6.236451]@3 synaptics,s3320: before on cpu [3]
776<3>[ 6.240286]@3 synaptics,s3320: check CPU[0] is [online]
777<3>[ 6.245822]@3 touchkey,s1302: boot_time: before optimize [synaptics_ts_probe] on cpu 3
778<3>[ 6.253476]@3 touchkey,s1302: boot_time: [synaptics_ts_probe] CPU0 is online
779<3>[ 6.262395]@3 switch_data->key3_gpio=1013
780<3>[ 6.265468]@3 switch_data->key2_gpio=1012
781<3>[ 6.269541]@3 switch_data->key1_gpio=1014
782<6>[ 6.274986]@3 fpc1020_probe
783<6>[ 6.276943]@3 fpc1020 soc:fpc_fpc1020: fpc,irq-gpio - gpio: 95
784<6>[ 6.282658]@3 fpc1020 soc:fpc_fpc1020: fpc,reset-gpio - gpio: 86
785<6>[ 6.288570]@3 fpc1020 soc:fpc_fpc1020: fpc,gpio_id0 - gpio: 25
786<3>[ 6.294382]@3 fpc1020 soc:fpc_fpc1020: fpc1020_probe: gpio_is_valid(fpc1020->id0_gpio=25)
787<6>[ 6.302567]@3 fpc1020 soc:fpc_fpc1020: fpc,gpio_id1 - gpio: 143
788<3>[ 6.308432]@3 fpc1020 soc:fpc_fpc1020: fpc1020_probe: gpio_is_valid(fpc1020->id1_gpio=143)
789<6>[ 6.316716]@3 fpc1020 soc:fpc_fpc1020: fpc,gpio_1V8_EN - gpio: 14
790<6>[ 6.322885]@3 input: fpc1020 as /devices/virtual/input/input1
791<6>[ 6.328708]@3 fpc1020 soc:fpc_fpc1020: requested irq 359
792<6>[ 6.333844]@3 fpc1020 soc:fpc_fpc1020: fpc1020_probe: ok
793<6>[ 6.340448]@3 qcom,qpnp-rtc qpnp-rtc-8: rtc core: registered qpnp_rtc as rtc0
794<6>[ 6.346711]@3 i2c /dev entries driver
795<3>[ 6.351606]@3 SMBCHG: load_data: chip is NULL !
796<3>[ 6.355407]@3 SMBCHG: load_data: chip is NULL !
797<6>[ 6.359720]@3 FG: fg_probe: FG Probe success - FG Revision DIG:3.1 ANA:1.2 PMIC subtype=19
798<6>[ 6.368186]@3 BQ: bq27541_battery_probe: probe sucdess
799<3>[ 6.373435]@3 i2c-msm-v2 757a000.i2c: msm_bus_scale_register_client(mstr-id:86):0x11 (ok)
800<6>BQ: check_bat_type: is_4p4v_bat=1,support_4p4v_bat=1
801<4>[ 6.387103]@2 i2c-core: driver [bq27541-battery] using legacy suspend method
802<4>[ 6.394120]@2 i2c-core: driver [bq27541-battery] using legacy resume method
803<6>[ 6.401763]@2 FASTCHG: dash_probe: dash_probe
804<6>[ 6.440043]@2 FASTCHG: dash_probe: dash_probe success
805<3>[ 6.446015]@2 unable to find DT imem DLOAD mode node
806<3>[ 6.451346]@2 unable to find DT imem EDLOAD mode node
807<4>[ 6.456345]@2 set_dload_mode ON
808<6>[ 6.489000]@3 device-mapper: uevent: version 1.0.3
809<6>[ 6.492929]@3 device-mapper: ioctl: 4.28.0-ioctl (2014-09-17) initialised: dm-devel@redhat.com
810<6>[ 6.501379]@3 device-mapper: req-crypt: dm-req-crypt successfully initalized.
811<6>
812<6>[ 6.508810]@3 sdhci: Secure Digital Host Controller Interface driver
813<6>[ 6.514999]@3 sdhci: Copyright(c) Pierre Ossman
814<6>[ 6.519502]@3 sdhci-pltfm: SDHCI platform and OF driver helper
815<6>[ 6.530184]@3 hidraw: raw HID events driver (C) Jiri Kosina
816<6>[ 6.535140]@3 ashmem: initialized
817<6>[ 6.538105]@3 logger: created 256K log 'log_main'
818<3>[ 6.540038]@0 synaptics,s3320: after on cpu [0]
819<3>[ 6.540045]@0 synaptics,s3320: synaptics_ts_probe is called
820<3>[ 6.540447]@0 synaptics,s3320: synaptics_parse_dts ts->support_hw_poweroff =1
821<3>[ 6.540452]@0 synaptics,s3320: ts->enable2v8_gpio not specified
822<3>[ 6.540454]@0 synaptics,s3320: ts->max_num not specified
823<3>[ 6.540457]@0 synaptics,s3320: button-map not specified
824<3>[ 6.540459]@0 synaptics,s3320: synaptics:button map readed is 0 0 0
825<3>[ 6.540462]@0 synaptics,s3320: synaptics,tx-rx-num is 16 28
826<4>[ 6.540466]@0 synaptics,s3320: synaptic:ts->irq_gpio:125 irq_flags:8200 max_num 10
827<3>[ 6.541013]@0 synaptics,s3320: synaptics:enable the v1p8_gpio
828<3>[ 6.560055]@0 touchkey,s1302: boot_time: after optimize call [synaptics_ts_probe] on cpu 0
829<3>[ 6.560061]@0 touchkey,s1302: synaptics_ts_probe is called
830<6>[ 6.615441]@3 logger: created 256K log 'log_events'
831<6>[ 6.620300]@3 logger: created 256K log 'log_radio'
832<6>[ 6.625057]@3 logger: created 256K log 'log_system'
833<3>[ 6.630039]@0 synaptics,s3320: synaptics:enable the reset_gpio
834<6>[ 6.632240]@3 qpnp_coincell_charger_show_state: enabled=Y, voltage=3200 mV, resistance=2100 ohm
835<6>[ 6.648145]@3 bimc-bwmon 408000.qcom,cpu-bwmon: BW HWmon governor registered.
836<6>[ 6.655387]@3 arm-memlat-mon soc:qcom,arm-memlat-mon-0: Memory Latency governor registered.
837<6>[ 6.662769]@3 arm-memlat-mon soc:qcom,arm-memlat-mon-2: Memory Latency governor registered.
838<6>[ 6.673054]@3 m4m-hwmon 6530000.qcom,m4m-hwmon: Cache HWmon governor registered.
839<3>[ 6.682871]@3 devfreq soc:qcom,cpubw: Couldn't update frequency transition information.
840<3>[ 6.689932]@3 devfreq soc:qcom,mincpubw: Couldn't update frequency transition information.
841<3>[ 6.698196]@3 devfreq soc:qcom,memlat-cpu0: Couldn't update frequency transition information.
842<3>[ 6.706683]@3 devfreq soc:qcom,memlat-cpu2: Couldn't update frequency transition information.
843<6>[ 6.718462]@3 otracer: initialized
844<6>[ 6.720945]@3 op_netlink_init
845<3>[ 6.724443]@3 tfa98xx_i2c_probe
846<6>[ 6.727313]@3 TCP: cubic registered
847<6>[ 6.730553]@3 NET: Registered protocol family 10
848<6>[ 6.735285]@2 NET: Registered protocol family 17
849<6>[ 6.740208]@2 NET: Registered protocol family 27
850<6>[ 6.746551]@1 subsys-pil-tz 9300000.qcom,lpass: for adsp segments only will be dumped.
851<3>i2c-msm-v2 75ba000.i2c: msm_bus_scale_register_client(mstr-id:84):0x18 (ok)
852<3>synaptics,s3320: F12_2D_QUERY_BASE = 47
853<3> F12_2D_CMD_BASE = 0
854<3> F12_2D_CTRL_BASE = 15
855<3> F12_2D_DATA_BASE = 6
856<3>
857<3>synaptics,s3320: F01_RMI_QUERY_BASE = 2a
858<3> F01_RMI_CMD_BASE = 25
859<3> F01_RMI_CTRL_BASE = e
860<3> F01_RMI_DATA_BASE = 4
861<3>
862<3>synaptics,s3320: F34_FLASH_QUERY_BASE = 26
863<3> F34_FLASH_CMD_BASE = 0
864<3> F34_FLASH_CTRL_BASE = a
865<3> F34_FLASH_DATA_BASE = 0
866<3>
867<3>synaptics,s3320: F51_CUSTOM_QUERY_BASE = 3a
868<3> F51_CUSTOM_CMD_BASE = 0
869<3> F51_CUSTOM_CTRL_BASE = 1a
870<3> F51_CUSTOM_DATA_BASE = 0
871<3>
872<3>synaptics,s3320: F54_QUERY_BASE = 47
873<3> F54_CMD_BASE = 46
874<3> F54_CTRL_BASE = e
875<3> F54_DATA_BASE = 0
876<3>
877<3>synaptics,s3320: before fw update bootloader_mode[0x0]
878<3>[ 6.752322]@0 synaptics,s3320: CURRENT_FIRMWARE_ID = 0x15811001
879<3>[ 6.752721]@0 synaptics,s3320: 0synatpitcs_fw: fw_name = tp/fw_synaptics_15811.img,ts->manu_name:S350815811
880<3>[ 6.760430]@0 synaptics,s3320: synaptics_init_panel is called!
881<3>[ 6.760682]@0 synaptics,s3320: synaptics_mode_change: set TP to mode[0x80]
882<3>[ 6.762268]@0 synaptics,s3320: max_x = 1080,max_y = 1920; max_x_ic = 1079,max_y_ic = 1919
883<3>[ 6.762408]@0 synaptics,s3320: afte fw update,program memory self-check bootloader_mode = 0x0
884<3>[ 6.762845]@0 synaptics,s3320: synaptics_soft_reset !!!
885<6>[ 6.872861]@3 subsys-pil-tz 1c00000.qcom,ssc: for slpi segments only will be dumped.
886<6>sps:BAM 0x0000000006b04000 is registered.
887<3>qpnp-smbcharger qpnp-smbcharger-17: node /soc/qcom,spmi@400f000/qcom,pmi8994@2/qcom,qpnp-smbcharger IO resource absent!
888<6>[ 6.895291]@3 SMBCHG: qpnp_battery_temp_region_set: set temp_region = 5
889<6>[ 6.901861]@3 smbcharger_charger_otg: no parameters
890<6>[ 6.906725]@3 smbcharger_external_otg: no parameters
891<6>[ 6.911631]@3 smbcharger_external_otg: supplied by pmi8994_boost_5v
892<6>[ 6.917911]@3 SMBCHG: smbchg_hw_init: enable APSD
893<6>[ 6.922597]@3 SMBCHG: smbchg_hw_init: disabe HVDCP
894<6>[ 6.927556]@3 SMBCHG: smbchg_charging_en: enable=1
895<6>[ 6.932211]@3 SMBCHG: smbchg_charging_en: enable=0
896<6>[ 6.936885]@3 SMBCHG: smbchg_usb_suspend: suspend=0
897<6>[ 6.942190]@3 SMBCHG: smbchg_set_fastchg_current_raw: fastcharge current requested 500, set to 500
898<3>[ 6.950290]@0 synaptics,s3320: synaptics_tpedge_limitfunc limit_enable =1,mode:0x4b !
899<3>[ 6.950493]@0 synaptics,s3320: synaptics_input_init is called
900<6>[ 6.950577]@0 input: synaptics,s3320 as /devices/soc/75ba000.i2c/i2c-12/12-0020/input/input2
901<6>[ 7.000561]@2 SMBCHG: handle_usb_insertion: inserted type = 4 (SDP)
902<6>[ 7.005782]@2 SMBCHG: smbchg_charging_en: enable=1
903<3>[ 7.010040]@0 synaptics,s3320: synaptic:ts->irq is 389
904<3>[ 7.010642]@1 synaptics,s3320: enter reset tp status,and ts->in_gesture_mode is:0
905<3>[ 7.010646]@1 synaptics,s3320: synaptics_init_panel is called!
906<3>[ 7.010886]@1 synaptics,s3320: synaptics_mode_change: set TP to mode[0x80]
907<3>[ 7.030535]@0 synaptics,s3320: synaptics_ts_probe: going to create files--tp_fw_update
908<4>[ 7.030628]@0 synaptics,s3320: synaptics_ts_probe 3203: normal end
909<6>[ 7.049909]@2 FG: oneplus_set_allow_read_iic: set allow read extern fg iic fail
910<6>[ 7.057183]@2 SMBCHG: smbchg_set_usb_current_max: USB current_ma = 500, typeC_support_current_ma = 4000
911<6>[ 7.066879]@2 SMBCHG: smbchg_usb_update_online_work: chip->usb_online = -22, online = 1
912<6>[ 7.074658]@3 SMBCHG: load_data: stored_soc[0x0], shutdown_soc[126]
913<6>[ 7.080898]@3 SMBCHG: load_data: stored_soc[0x0], shutdown_soc[126]
914<3>[ 7.103224]@2 msm-usb-ssphy-qmp 7410000.ssphy: QMP PHY initialization timeout
915<6>[ 7.103748]@3 SMBCHG: load_data: stored_soc[0x0], shutdown_soc[126]
916<6>[ 7.104092]@0 SMBCHG: load_data: stored_soc[0x0], shutdown_soc[126]
917<6>[ 7.104201]@0 SMBCHG: load_data: stored_soc[0x0], shutdown_soc[126]
918<6>[ 7.104327]@0 SMBCHG: load_data: stored_soc[0x0], shutdown_soc[126]
919<3>[ 7.106374]@0 qpnp-smbcharger qpnp-smbcharger-17: node /soc/qcom,spmi@400f000/qcom,pmi8994@2/qcom,qpnp-smbcharger IO resource absent!
920<6>[ 7.107180]@0 SMBCHG: load_data: stored_soc[0x0], shutdown_soc[126]
921<3>[ 7.110368]@0 i2c-msm-v2 75b6000.i2c: msm_bus_scale_register_client(mstr-id:84):0x1a (ok)
922<3>touchkey,s1302: product id is s1302
923<3>[ 7.111207]@0 touchkey,s1302: F11_2D_QUERY_BASE = 95
924<3> F11_2D_CMD_BASE = 6e
925<3> F11_2D_CTRL_BASE = 3d
926<3> F11_2D_DATA_BASE = 15
927<3>
928<3>touchkey,s1302: CURRENT_FIRMWARE_ID = 0x4
929<3>[ 7.112589]@0 touchkey,s1302: before fw update,bootloader_mode = 0x0
930<6>[ 7.112682]@0 input: HWK,synaptics,s1302 as /devices/soc/75b6000.i2c/i2c-8/8-0020/input/input3
931<6>[ 7.147459]@3 SMBCHG: load_data: stored_soc[0x0], shutdown_soc[126]
932<6>[ 7.147540]@3 SMBCHG: load_data: stored_soc[0x0], shutdown_soc[126]
933<6>[ 7.147637]@3 SMBCHG: load_data: stored_soc[0x0], shutdown_soc[126]
934<6>[ 7.150297]@3 SMBCHG: load_data: stored_soc[0x0], shutdown_soc[126]
935<3>[ 7.210029]@0 touchkey,s1302: synaptic:ts->irq is 396
936<3>[ 7.210138]@0 touchkey,s1302: touchkey using poll status:0
937<3>[ 7.210342]@0 touchkey,s1302: synaptics_soft_reset !!!
938<3>[ 7.210365]@0 touchkey,s1302: create nodes is successe!
939<4>[ 7.210417]@0 touchkey,s1302: synaptics_ts_probe s1302: normal end
940<3>[ 7.210419]@0 touchkey,s1302: boot_time: synaptics_ts_probe return 0
941<3>[ 7.253593]@2 msm-usb-ssphy-qmp 7410000.ssphy: USB3_PHY_PCS_STATUS:69696969
942<6>[ 7.262743]@0 qpnp-smbcharger qpnp-smbcharger-17: SMBCHG successfully probe Charger version=SCHG Revision DIG:2.0 ANA:2.1 batt=1 dc=0 usb=1
943<6>[ 7.274269]@0 SMBCHG: load_data: stored_soc[0x0], shutdown_soc[126]
944<3>[ 7.274289]@1 tusb320 7-0060: tusb320_probe
945<3>[ 7.274579]@1 i2c-msm-v2 75b5000.i2c: msm_bus_scale_register_client(mstr-id:84):0x1b (ok)
946<3>i2c-msm-v2 75b5000.i2c: NACK: slave not responding, ensure its powered: msgs(n:2 cur:0 tx) bc(rx:1 tx:1) mode:FIFO slv_addr:0x60 MSTR_STS:0x0d1300c8 OPER:0x00000010
947<4>[ 7.280515]@1 tusb320_read_reg:reg(0x0), ret(-107)
948<3>[ 7.280520]@1 tusb320 7-0060: DEV_ID(0x0)!= 0x30
949<4>[ 7.280530]@1 tusb320: probe of 7-0060 failed with error -22
950<3>[ 7.280571]@1 fusb301 7-0021: fusb301_probe
951<3>[ 7.284811]@1 fusb301 7-0021: fusb301_gpio_configure OK!
952<3>[ 7.312313]@1 fusb301 7-0021: fusb301_probe OK!
953<3>[ 7.312373]@1 ptn5150 7-001d: ptn5150_probe
954<3>[ 7.316584]@0 i2c-msm-v2 75b5000.i2c: NACK: slave not responding, ensure its powered: msgs(n:2 cur:0 tx) bc(rx:1 tx:1) mode:FIFO slv_addr:0x1d MSTR_STS:0x0d1300c8 OPER:0x00000010
955<3>[ 7.316611]@1 ptn5150_read_reg: i2c read error: -5
956<3>[ 7.316614]@1 ptn5150 7-001d: DEV_ID(0x00)!= 0x0b || 0x09
957<4>[ 7.316621]@1 ptn5150: probe of 7-001d failed with error -22
958<6>[ 7.330553]@3 project_info_init_sysfs success
959<6>[ 7.330944]@3 fastrpc soc:qcom,msm-adsprpc-mem: for adsp_rh segments only will be dumped.
960<6>adsprpc: channel link type: 0
961<6>[ 7.338692]@3 file system registered
962<6>[ 7.338717]@3 mbim_init: initialize 1 instances
963<6>[ 7.338747]@3 mbim_init: Initialized 1 ports
964<6>[ 7.339351]@3 rndis_qc_init: initialize rndis QC instance
965<6>[ 7.339441]@3 Number of LUNs=8
966<6>[ 7.339447]@3 Mass Storage Function, version: 2009/09/11
967<6>[ 7.339449]@3 LUN: removable file: (no medium)
968<6>[ 7.339458]@3 Number of LUNs=1
969<6>[ 7.339480]@3 LUN: removable read only CD-ROM file: (no medium)
970<6>[ 7.339482]@3 Number of LUNs=1
971<6>[ 7.339569]@3 android_usb gadget: android_usb ready
972<6>[ 7.340829]@3 input: gpio-keys as /devices/soc/soc:gpio_keys/input/input4
973<6>[ 7.356254]@3 qcom,qpnp-rtc qpnp-rtc-8: setting system clock to 1970-02-16 13:50:32 UTC (4024232)
974<6>[ 7.356634]@3 SMBCHG: load_data: stored_soc[0x0], shutdown_soc[126]
975<6>[ 7.361231]@3 lmh_lite:lmh_parse_sensor Registering sensor:[DLMt_APC1]
976<6>[ 7.361427]@1 lmh_lite:lmh_parse_sensor Registering sensor:[LLM_cp00]
977<6>[ 7.361568]@3 lmh_lite:lmh_parse_sensor Registering sensor:[LLM_cp01]
978<6>[ 7.361680]@3 lmh_lite:lmh_parse_sensor Registering sensor:[LLM_cp10]
979<6>[ 7.361785]@3 lmh_lite:lmh_parse_sensor Registering sensor:[LLM_cp11]
980<6>[ 7.361888]@3 lmh_lite:lmh_parse_sensor Registering sensor:[LLM_m4m0]
981<6>[ 7.361993]@3 lmh_lite:lmh_parse_sensor Registering sensor:[LLM_l21-]
982<6>[ 7.362099]@3 lmh_lite:lmh_parse_sensor Registering sensor:[LLM_l20-]
983<3>[ 7.363729]@3 parse_cpu_levels: idx 1 545
984<3>[ 7.363734]@3 parse_cpu_levels: idx 2 6022
985<3>[ 7.363736]@3 parse_cpu_levels: idx 2 11499
986<3>[ 7.363769]@3 parse_cpu_levels: idx 1 545
987<3>[ 7.363771]@3 parse_cpu_levels: idx 2 6022
988<3>[ 7.363773]@3 parse_cpu_levels: idx 2 11499
989<3>[ 7.367833]@3 qcom,qpnp-flash-led qpnp-flash-led-25: Unable to acquire pinctrl
990<6>[ 7.369084]@3 rmnet_ipa started initialization
991<6>[ 7.369089]@3 IPA SSR support = True
992<6>[ 7.369091]@3 IPA ipa-loaduC = True
993<6>[ 7.369093]@3 IPA SG support = True
994<3>[ 7.395718]@3 ipa ipa_sps_irq_control_all:938 EP (5) not allocated.
995<3>[ 7.395722]@3 ipa ipa2_uc_state_check:301 uC is not loaded
996<6>[ 7.413312]@3 BQ: bq27541_hw_config: DEVICE_TYPE is 0x541, FIRMWARE_VERSION is 0x200
997<6>[ 7.413315]@3 BQ: bq27541_hw_config: Complete bq27541 configuration 0x600B
998<6>[ 7.420792]@1 rmnet_ipa completed initialization
999<6>[ 7.424461]@1 qcom,cc-debug-8996 362000.qcom,cc-debug: Registered debug mux.
1000<6>[ 7.425134]@1 apc0_pwrcl_mem_acc_corner: disabling
1001<6>[ 7.425140]@1 apc1_perfcl_mem_acc_corner: disabling
1002<6>[ 7.425143]@1 apcc_l3_mem_acc_corner: disabling
1003<6>[ 7.425145]@1 gfx_mem_acc_corner: disabling
1004<6>[ 7.425148]@1 kryo0-retention: disabling
1005<6>[ 7.425151]@1 kryo1-retention: disabling
1006<6>[ 7.425200]@1 gdsc_mmagic_bimc: disabling
1007<6>[ 7.425202]@1 rome_vreg: disabling
1008<6>[ 7.425205]@1 wlan_en_vreg: disabling
1009<6>[ 7.425284]@1 regulator_proxy_consumer_remove_all: removing regulator proxy consumer requests
1010<6>[ 7.425615]@1 clock_late_init: Removing enables held for handed-off clocks
1011<6>[ 7.521592]@1 ALSA device list:
1012<6>[ 7.521596]@1 No soundcards found.
1013<6>[ 7.652140]@1 Freeing unused kernel memory: 2128K (ffffffc001000000 - ffffffc001214000)
1014<3>[ 7.659310]@0 BQ: bq27541_battery_soc: bq27541_battery_soc = 80
1015<6>[ 7.660064]@1 Freeing alternatives memory: 68K (ffffffc001214000 - ffffffc001225000)
1016<6>[ 7.672927]@0 SMBCHG: load_data: stored_soc[0x0], shutdown_soc[126]
1017<6>[ 7.679129]@0 BQ: fg_soc_calibrate: soc=80, soc_load=-1
1018<13>[ 7.690228]@1 init: init started!
1019<7>[ 7.693933]@1 SELinux: 2048 avtab hash slots, 4859 rules.
1020<6>[ 7.693962]@1 SELinux: Android master kernel running Android M policy in compatibility mode.
1021<7>[ 7.702153]@2 SELinux: 2048 avtab hash slots, 4859 rules.
1022<7>[ 7.702165]@2 SELinux: 1 users, 2 roles, 530 types, 0 bools, 1 sens, 1024 cats
1023<7>[ 7.702171]@2 SELinux: 87 classes, 4859 rules
1024<6>[ 7.702412]@2 SELinux: Permission module_load in class system not defined in policy.
1025<6>[ 7.709415]@2 SELinux: Permission audit_read in class capability2 not defined in policy.
1026<6>[ 7.717441]@2 SELinux: Class can_socket not defined in policy.
1027<6>[ 7.723335]@2 SELinux: the above unknown classes and permissions will be denied
1028<7>[ 7.730643]@2 SELinux: Completing initialization.
1029<7>[ 7.730646]@2 SELinux: Setting up existing superblocks.
1030<7>[ 7.730654]@2 SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
1031<7>[ 7.730668]@2 SELinux: initialized (dev rootfs, type rootfs), uses genfs_contexts
1032<7>[ 7.731075]@2 SELinux: initialized (dev bdev, type bdev), not configured for labeling
1033<7>[ 7.731083]@2 SELinux: initialized (dev proc, type proc), uses genfs_contexts
1034<7>[ 7.731097]@2 SELinux: initialized (dev debugfs, type debugfs), uses genfs_contexts
1035<7>[ 7.753316]@2 SELinux: initialized (dev sockfs, type sockfs), uses task SIDs
1036<7>[ 7.753331]@2 SELinux: initialized (dev pipefs, type pipefs), uses task SIDs
1037<7>[ 7.753337]@2 SELinux: initialized (dev anon_inodefs, type anon_inodefs), not configured for labeling
1038<7>[ 7.753342]@2 SELinux: initialized (dev aio, type aio), not configured for labeling
1039<7>[ 7.753348]@2 SELinux: initialized (dev devpts, type devpts), uses transition SIDs
1040<7>[ 7.753363]@2 SELinux: initialized (dev selinuxfs, type selinuxfs), uses genfs_contexts
1041<7>[ 7.753416]@2 SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
1042<7>[ 7.753430]@2 SELinux: initialized (dev sysfs, type sysfs), uses genfs_contexts
1043<5>[ 7.762591]@2 audit: type=1403 audit(4024232.909:2): policy loaded auid=4294967295 ses=4294967295
1044<13>[ 7.770784]@2 init: (Initializing SELinux non-enforcing took 0.08s.)
1045<13>[ 7.779353]@2 init: init second stage started!
1046<11>[ 7.783028]@2 init: property_set("ro.boot.bootdevice", "624000.ufshc") failed
1047<11>[ 7.789901]@2 init: property_set("ro.boot.selinux", "permissive") failed
1048<11>[ 8.105976]@2 init: waitpid failed: No child processes
1049<13>[ 8.110347]@2 init: (Loading properties from /default.prop took 0.00s.)
1050<11>[ 8.116935]@2 init: /init.rc: 62: invalid command 'load_all_props'
1051<11>[ 8.122912]@2 init: could not import file '/init.recovery.logd.rc' from '/init.rc'
1052<13>[ 8.130481]@2 init: (Parsing /init.recovery.usb.rc took 0.00s.)
1053<13>[ 8.136330]@2 init: (Parsing /init.recovery.service.rc took 0.00s.)
1054<13>[ 8.142605]@2 init: (Parsing /init.recovery.qcom.rc took 0.00s.)
1055<13>[ 8.148545]@2 init: (Parsing /init.rc took 0.03s.)
1056<5>[ 8.153389]@2 audit: type=1400 audit(4024233.309:3): avc: denied { setcheckreqprot } for pid=1 comm="init" scontext=u:r:init:s0 tcontext=u:object_r:kernel:s0 tclass=security permissive=1
1057<5>[ 8.170229]@2 audit: type=1400 audit(4024233.319:4): avc: denied { setcurrent } for pid=1 comm="init" scontext=u:r:init:s0 tcontext=u:r:init:s0 tclass=process permissive=1
1058<5>[ 8.185728]@2 audit: type=1400 audit(4024233.339:5): avc: denied { dyntransition } for pid=1 comm="init" scontext=u:r:init:s0 tcontext=u:r:init:s0 tclass=process permissive=1
1059<11>[ 8.201535]@2 init: SELinux: Could not get canonical path /postinstall restorecon: No such file or directory.
1060<13>[ 8.211431]@2 init: Starting service 'ueventd'...
1061<13>[ 8.216218]@2 init: Starting service 'healthd'...
1062<13>[ 8.217251]@3 ueventd: ueventd started!
1063<13>[ 8.224765]@2 init: Waiting for /dev/.coldboot_done...
1064<13>[ 8.995676]@3 ueventd: Coldboot took 0.78s.
1065<13>[ 8.995812]@0 init: Waiting for /dev/.coldboot_done took 0.77s.
1066<7>[ 9.020633]@0 SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
1067<13>[ 9.021255]@0 init: Starting service 'setup-decrypt'...
1068<7>[ 9.025684]@0 SELinux: initialized (dev pstore, type pstore), uses genfs_contexts
1069<7>[ 9.026423]@0 SELinux: initialized (dev functionfs, type functionfs), uses genfs_contexts
1070<3>[ 9.026549]@0 enable_store: android_usb: already disabled
1071<3>[ 9.031490]@0 functions_store: android_usb: functions_store'adb'
1072<5>[ 9.036811]@3 audit: type=1400 audit(4024234.179:6): avc: denied { write } for pid=394 comm="setup_decrypt" name="kmsg" dev="tmpfs" ino=14716 scontext=u:r:recovery:s0 tcontext=u:object_r:kmsg_device:s0 tclass=chr_file permissive=1
1073<5>[ 9.036829]@3 audit: type=1400 audit(4024234.179:7): avc: denied { open } for pid=394 comm="setup_decrypt" path="/dev/kmsg" dev="tmpfs" ino=14716 scontext=u:r:recovery:s0 tcontext=u:object_r:kmsg_device:s0 tclass=chr_file permissive=1
1074<12>[ 9.036859]@3 setup_decrypt: Mounting /system read-only
1075<13>[ 9.084029]@3 init: (Loading properties from /system/build.prop took 0.00s.)
1076<13>[ 9.090889]@3 init: (Loading properties from /vendor/build.prop took 0.00s.)
1077<6>[ 9.092721]@1 EXT4-fs (sde20): mounted filesystem with ordered data mode. Opts: (null)
1078<7>[ 9.092739]@1 SELinux: initialized (dev sde20, type ext4), uses xattr
1079<13>[ 9.105794]@3 init: (Loading properties from /factory/factory.prop took 0.00s.)
1080<12>[ 9.105867]@1 setup_decrypt: Copying decryption libraries from /system
1081<5>[ 9.109669]@2 audit: type=1400 audit(4024234.249:8): avc: denied { write } for pid=405 comm="cp" name="sbin" dev="rootfs" ino=8029 scontext=u:r:recovery:s0 tcontext=u:object_r:rootfs:s0 tclass=dir permissive=1
1082<5>[ 9.109684]@2 audit: type=1400 audit(4024234.249:9): avc: denied { remove_name } for pid=405 comm="cp" name="qseecomd" dev="rootfs" ino=8267 scontext=u:r:recovery:s0 tcontext=u:object_r:rootfs:s0 tclass=dir permissive=1
1083<5>[ 9.109694]@2 audit: type=1400 audit(4024234.249:10): avc: denied { unlink } for pid=405 comm="cp" name="qseecomd" dev="rootfs" ino=8267 scontext=u:r:recovery:s0 tcontext=u:object_r:rootfs:s0 tclass=file permissive=1
1084<5>[ 9.109726]@2 audit: type=1400 audit(4024234.249:11): avc: denied { add_name } for pid=405 comm="cp" name="qseecomd" scontext=u:r:recovery:s0 tcontext=u:object_r:rootfs:s0 tclass=dir permissive=1
1085<5>[ 9.129084]@2 random: sed urandom read with 90 bits of entropy available
1086<11>[ 9.204302]@3 init: avc: denied { set } for property=crypto.using_system_libs scontext=u:r:recovery:s0 tcontext=u:object_r:vold_prop:s0 tclass=property_service
1087<13>[ 9.217789]@3 init: (Loading properties from /data/local.prop took 0.00s.)
1088<12>[ 9.218644]@2 setup_decrypt: Using system decryption libraries!
1089<11>[ 9.230546]@3 init: Unable to open persistent property directory "/data/property": No such file or directory
1090<13>[ 9.240584]@3 init: Service 'setup-decrypt' (pid 391) exited with status 0
1091<13>[ 9.247408]@3 init: Starting service 'set_permissive'...
1092<13>[ 9.252584]@3 init: Starting service 'recovery'...
1093<3>[ 9.257733]@3 functions_store: android_usb: functions_store'mtp,adb'
1094<13>[ 9.263683]@3 init: Service 'set_permissive' (pid 414) exited with status 0
1095<13>[ 9.270850]@3 init: Starting service 'adbd'...
1096<11>[ 9.275184]@3 init: avc: denied { set } for property=twrp.crash_counter scontext=u:r:recovery:s0 tcontext=u:object_r:default_prop:s0 tclass=property_service
1097<6>[ 9.276762]@0 ep0_open success!
1098<6>[ 9.276772]@0 read descriptors
1099<6>[ 9.276813]@2 read strings
1100<6>[ 9.276830]@2 mtp_bind_config
1101<6>[ 9.276839]@2 mtp_create_bulk_endpoints: useFixAddr:false
1102<3>[ 9.306484]@3 dwc3 6a00000.dwc3: request ffffffc0b5467500 was not queued to ep0out
1103<13>[ 9.313978]@3 init: Service 'adbd' is being killed...
1104<6>[ 9.318939]@3 mtp_bind_config
1105<6>[ 9.321801]@3 mtp_create_bulk_endpoints: useFixAddr:false
1106<3>[ 9.327272]@3 ffs_function_bind_config: ffs_function_bind_config(): usb_add_function() fails (err:-19) for ffs
1107<3>[ 9.337189]@3 android_bind_enabled_functions: android_bind_enabled_functions: ffs failed
1108<3>[ 9.337230]@3 android_enable: android_enable: usb_add_config failed : err: -19
1109<3>[ 9.337233]@3 enable_store: enable_store: android_enable failed
1110<3>[ 9.337282]@3 dwc3 6a00000.dwc3: request ffffffc0b5467500 was not queued to ep0out
1111<4>[ 9.337286]@3 ------------[ cut here ]------------
1112<4>[ 9.337288]@3 WARNING: CPU: 3 PID: 420 at ../drivers/usb/gadget/composite.c:1028 usb_remove_config+0x3c/0xe8()
1113<4>[ 9.337300]@3 CPU: 3 PID: 420 Comm: adbd Not tainted 3.18.47-twrp-3.0 #1
1114<4>[ 9.337303]@3 Hardware name: Qualcomm Technologies, Inc. MSM 8996pro + PMI8996 MTP (DT)
1115<0>[ 9.337306]@3 Call trace:
1116<4>[ 9.337307]@3 [<ffffffc000206440>] dump_backtrace+0x0/0xf0
1117<4>[ 9.337314]@3 ---[ end trace 1db293509560536f ]---
1118<13>[ 9.337552]@3 init: Service 'adbd' (pid 418) killed by signal 9
1119<13>[ 9.337560]@3 init: Service 'adbd' (pid 418) killing any children in process group
1120<4>[ 9.421647]@2 blank off start
1121<3>[ 9.421656]@2 fpc1020 soc:fpc_fpc1020: fb_notifier_callback screen off
1122<3>[ 9.421676]@2 synaptics,s3320: fb_notifier_callback blank[4],event[0x10]
1123<3>[ 9.421679]@2 synaptics,s3320: fb_notifier_callback : going TP suspend start
1124<3>[ 9.421683]@2 synaptics,s3320: synaptics_ts_suspend enter
1125<3>[ 9.421689]@2 synaptics,s3320: synaptics_ts_suspend normal end
1126<3>[ 9.421691]@2 synaptics,s3320: fb_notifier_callback : going TP suspend end
1127<3>[ 9.421760]@2 synaptics,s3320: fb_notifier_callback blank[4],event[0x9]
1128<4>[ 9.422216]@2 blank off end
1129<4>[ 9.472221]@2 blank on start
1130<3>[ 9.473656]@2 fpc1020 soc:fpc_fpc1020: fb_notifier_callback screen on
1131<3>[ 9.473673]@2 synaptics,s3320: fb_notifier_callback blank[0],event[0x10]
1132<3>[ 9.473676]@2 synaptics,s3320: fb_notifier_callback going TP resume start
1133<3>[ 9.473679]@2 synaptics,s3320: synaptics_ts_resume enter!
1134<3>[ 9.473691]@2 synaptics,s3320: synaptics_ts_resume:normal end!
1135<3>[ 9.473692]@2 synaptics,s3320: fb_notifier_callback going TP resume end
1136<3>[ 9.473822]@3 synaptics,s3320: fb_notifier_callback blank[0],event[0x9]
1137<6>[ 9.474056]@3 BQ: bq27541_set_lcd_off_status: off=0
1138<4>[ 9.474060]@3 blank on end
1139<3>[ 9.480047]@1 synaptics,s3320: tp_baseline_get start!
1140<3>[ 9.520581]@1 sps: BAM device 0x0000000007584000 is not registered yet.
1141<6>[ 9.520746]@1 sps:BAM 0x0000000007584000 is registered.
1142<6>sps:BAM 0x0000000007584000 (va:0xffffff8006300000) enabled: ver:0x19, number of pipes:24
1143<3>[ 9.560452]@3 synaptics,s3320: enter reset tp status,and ts->in_gesture_mode is:0
1144<3>[ 9.560457]@3 synaptics,s3320: synaptics_init_panel is called!
1145<3>[ 9.560711]@3 synaptics,s3320: synaptics_mode_change: set TP to mode[0x80]
1146<4>[ 9.565068]@1 mdss_dsi_on start
1147<6>[ 9.565074]@1 get_param_by_index_and_offset[75] sid_index = 2 offset = 32 buf = ffffffc0b630af58 length = 4
1148<3>[ 9.565078]@1 mdss_dsi_on:srgb mode 0
1149<6>[ 9.565080]@1 get_param_by_index_and_offset[75] sid_index = 2 offset = 36 buf = ffffffc0b630afa0 length = 4
1150<3>[ 9.565083]@1 mdss_dsi_on:srgb mode 0
1151<6>[ 9.565084]@1 get_param_by_index_and_offset[75] sid_index = 2 offset = 40 buf = ffffffc0b630afe8 length = 4
1152<3>[ 9.565089]@1 mdss_dsi_on:srgb mode 0
1153<4>[ 9.565092]@1 mdss_dsi_on end
1154<4>[ 9.566220]@1 --------backlight level = 127---------
1155<3>[ 9.640363]@1 synaptics,s3320: synaptics_tpedge_limitfunc limit_enable =1,mode:0x4b !
1156<3>[ 9.647375]@1 synaptics,s3320: tp_baseline_get end!
1157<6>[ 9.679240]@3 F2FS-fs (sda15): Magic Mismatch, valid(0xf2f52010) - read(0x8bd6b1e6)
1158<3>[ 9.685900]@3 F2FS-fs (sda15): Can't find valid F2FS filesystem in 1th superblock
1159<6>[ 9.694887]@3 F2FS-fs (sda15): Magic Mismatch, valid(0xf2f52010) - read(0xd180f231)
1160<3>[ 9.701518]@3 F2FS-fs (sda15): Can't find valid F2FS filesystem in 2th superblock
1161<6>[ 9.708971]@3 F2FS-fs (sda15): Magic Mismatch, valid(0xf2f52010) - read(0x8bd6b1e6)
1162<3>[ 9.716640]@3 F2FS-fs (sda15): Can't find valid F2FS filesystem in 1th superblock
1163<6>[ 9.724084]@3 F2FS-fs (sda15): Magic Mismatch, valid(0xf2f52010) - read(0xd180f231)
1164<3>[ 9.731734]@3 F2FS-fs (sda15): Can't find valid F2FS filesystem in 2th superblock
1165<6>[ 9.740807]@3 F2FS-fs (sda15): Magic Mismatch, valid(0xf2f52010) - read(0x8bd6b1e6)
1166<3>[ 9.747419]@3 F2FS-fs (sda15): Can't find valid F2FS filesystem in 1th superblock
1167<6>[ 9.755049]@3 F2FS-fs (sda15): Magic Mismatch, valid(0xf2f52010) - read(0xd180f231)
1168<3>[ 9.762534]@3 F2FS-fs (sda15): Can't find valid F2FS filesystem in 2th superblock
1169<6>[ 9.769992]@3 F2FS-fs (sda15): Magic Mismatch, valid(0xf2f52010) - read(0x8bd6b1e6)
1170<3>[ 9.777639]@3 F2FS-fs (sda15): Can't find valid F2FS filesystem in 1th superblock
1171<6>[ 9.785108]@3 F2FS-fs (sda15): Magic Mismatch, valid(0xf2f52010) - read(0xd180f231)
1172<3>[ 9.792754]@3 F2FS-fs (sda15): Can't find valid F2FS filesystem in 2th superblock
1173<6>[ 9.809272]@3 F2FS-fs (sda15): Magic Mismatch, valid(0xf2f52010) - read(0x8bd6b1e6)
1174<3>[ 9.815948]@3 F2FS-fs (sda15): Can't find valid F2FS filesystem in 1th superblock
1175<6>[ 9.823507]@3 F2FS-fs (sda15): Magic Mismatch, valid(0xf2f52010) - read(0xd180f231)
1176<3>[ 9.831007]@3 F2FS-fs (sda15): Can't find valid F2FS filesystem in 2th superblock
1177<6>[ 9.838465]@3 F2FS-fs (sda15): Magic Mismatch, valid(0xf2f52010) - read(0x8bd6b1e6)
1178<3>[ 9.846110]@3 F2FS-fs (sda15): Can't find valid F2FS filesystem in 1th superblock
1179<6>[ 9.853582]@3 F2FS-fs (sda15): Magic Mismatch, valid(0xf2f52010) - read(0xd180f231)
1180<3>[ 9.861213]@3 F2FS-fs (sda15): Can't find valid F2FS filesystem in 2th superblock
1181<6>[ 9.870267]@3 F2FS-fs (sda15): Magic Mismatch, valid(0xf2f52010) - read(0x8bd6b1e6)
1182<3>[ 9.876881]@3 F2FS-fs (sda15): Can't find valid F2FS filesystem in 1th superblock
1183<6>[ 9.884499]@3 F2FS-fs (sda15): Magic Mismatch, valid(0xf2f52010) - read(0xd180f231)
1184<3>[ 9.892001]@3 F2FS-fs (sda15): Can't find valid F2FS filesystem in 2th superblock
1185<6>[ 9.899457]@3 F2FS-fs (sda15): Magic Mismatch, valid(0xf2f52010) - read(0x8bd6b1e6)
1186<3>[ 9.907112]@3 F2FS-fs (sda15): Can't find valid F2FS filesystem in 1th superblock
1187<6>[ 9.914770]@3 of_batterydata_get_best_profile: OP_3400mAH found
1188<6>[ 9.915738]@2 F2FS-fs (sda15): Magic Mismatch, valid(0xf2f52010) - read(0xd180f231)
1189<3>[ 9.915742]@2 F2FS-fs (sda15): Can't find valid F2FS filesystem in 2th superblock
1190<6>[ 9.930965]@2 EXT4-fs (sda3): recovery complete
1191<6>[ 9.931393]@2 EXT4-fs (sda3): mounted filesystem with ordered data mode. Opts:
1192<7>[ 9.931410]@2 SELinux: initialized (dev sda3, type ext4), uses xattr
1193<6>[ 9.931633]@2 SELinux: Context u:object_r:cache_recovery_file:s0 is not valid (left unmapped).
1194<6>[ 9.965562]@3 FG: fg_batt_profile_init: Battery SOC: 84, V: 4135107uV
1195<3>[ 11.280428]@3 switch_dev_work ,tristatekey set to state(2)
1196<3>[ 12.169788]@1 synaptics,s3320: start get base data:1
1197<3>[ 12.173893]@1 synaptics,s3320: tp_baseline_get start!
1198<3>[ 12.270056]@0 SMBCHG: smbchg_re_det_chg_type: Re-detect charger type
1199<6>[ 12.270064]@0 SMBCHG: smbchg_set_usb_current_max: USB current_ma = 300, typeC_support_current_ma = 4000
1200<3>[ 12.270095]@0 SMBCHG: smbchg_re_det_chg_type: Faking Removal
1201<6>[ 12.270228]@3 SMBCHG: usbin_uv_handler: triggered
1202<3>[ 12.270263]@3 SMBCHG: usbin_uv_handler: chip->usb_present = 1 rt_sts = 0x01 hvdcp_3_det_ignore_uv = 0 aicl = 1500
1203<6>[ 12.270274]@2 SMBCHG: src_detect_handler: chip->usb_present = 1 usb_present = 0 src_detect = 0 hvdcp_3_det_ignore_uv=0
1204<6>[ 12.270283]@2 SMBCHG: handle_usb_removal: triggered
1205<6>[ 12.270687]@2 SMBCHG: smbchg_usb_update_online_work: chip->usb_online = 1, online = 0
1206<3>[ 12.300307]@1 synaptics,s3320: synaptics_tpedge_limitfunc limit_enable =1,mode:0x4b !
1207<3>[ 12.300519]@1 synaptics,s3320: tp_baseline_get end!
1208<3>[ 12.300827]@1 synaptics,s3320: enter reset tp status,and ts->in_gesture_mode is:0
1209<3>[ 12.300830]@1 synaptics,s3320: synaptics_init_panel is called!
1210<3>[ 12.301075]@1 synaptics,s3320: synaptics_mode_change: set TP to mode[0x80]
1211<6>[ 12.391166]@1 msm-dwc3 6a00000.ssusb: DWC3 in low power mode
1212<6>[ 12.395844]@1 android_work: android_work: did not send uevent (0 0 (null))
1213<5>[ 12.700493]@0 random: nonblocking pool is initialized
1214<3>[ 12.780106]@0 SMBCHG: smbchg_re_det_chg_type: Faking Insertion
1215<6>[ 12.785096]@3 SMBCHG: usbin_uv_handler: triggered
1216<3>[ 12.789634]@3 SMBCHG: usbin_uv_handler: chip->usb_present = 0 rt_sts = 0x00 hvdcp_3_det_ignore_uv = 0 aicl = 1500
1217<3>[ 13.641106]@1 synaptics,s3320: all finger up
1218<6>[ 13.645709]@2 SMBCHG: src_detect_handler: chip->usb_present = 0 usb_present = 1 src_detect = 1 hvdcp_3_det_ignore_uv=0
1219<6>[ 13.655554]@2 SMBCHG: handle_usb_insertion: inserted type = 4 (SDP)
1220<6>[ 13.655563]@2 SMBCHG: smbchg_charging_en: enable=1
1221<6>[ 13.655573]@0 SMBCHG: smbchg_set_usb_current_max: USB current_ma = 1800, typeC_support_current_ma = 4000
1222<6>[ 13.655679]@0 SMBCHG: smbchg_rerun_aicl: Rerunning AICL...
1223<6>[ 13.710283]@2 SMBCHG: smbchg_set_usb_current_max: USB current_ma = 500, typeC_support_current_ma = 4000
1224<6>[ 13.710547]@2 SMBCHG: smbchg_usb_update_online_work: chip->usb_online = 0, online = 1
1225<3>[ 13.865693]@1 msm-usb-ssphy-qmp 7410000.ssphy: QMP PHY initialization timeout
1226<3>[ 13.871808]@1 msm-usb-ssphy-qmp 7410000.ssphy: USB3_PHY_PCS_STATUS:69696969
1227<6>[ 13.878837]@1 msm-dwc3 6a00000.ssusb: DWC3 exited from low power mode
1228<13>[ 14.340083]@2 init: Starting service 'adbd'...
1229<6>[ 14.350747]@1 ep0_open success!
1230<6>[ 14.352904]@1 read descriptors
1231<6>[ 14.355948]@1 read strings
1232<6>[ 14.358657]@1 mtp_bind_config
1233<6>[ 14.361708]@2 mtp_create_bulk_endpoints: useFixAddr:false
1234<6>[ 14.630121]@0 android_work: android_work: sent uevent USB_STATE=CONNECTED
1235<6>[ 14.636204]@0 android_work: android_work: sent uevent USB_STATE=DISCONNECTED
1236<6>[ 14.724371]@0 SMBCHG: notify_usb_enumeration_function: status=1
1237<6>[ 14.744701]@0 android_work: android_work: sent uevent USB_STATE=CONNECTED
1238<6>[ 14.752060]@0 android_usb gadget: high-speed config #1: 66bf0c8.android_usb
1239<6>[ 14.758101]@0 usb_gadget_vbus_draw USB setting current is 500mA
1240<6>[ 14.758116]@0 msm-dwc3 6a00000.ssusb: Avail curr from USB = 500
1241<6>[ 14.761458]@0 SMBCHG: set_chg_ibat_vbat_max: vote ibatmax = 1910 and set vbatmax = 4370
1242<6>[ 14.761526]@0 SMBCHG: smbchg_set_fastchg_current_raw: fastcharge current requested 1910, set to 1900
1243<6>[ 14.762139]@0 SMBCHG: qpnp_battery_temp_region_set: set temp_region = 5
1244<6>[ 14.762149]@0 SMBCHG: smbchg_external_power_changed: change usb_target_current_ma = 500
1245<6>[ 14.810154]@0 android_work: android_work: sent uevent USB_STATE=CONFIGURED
1246<4>[ 15.040106]@0 synap rmidev_create_attr
1247<4>[ 15.240188]@0 synap rmidev_create_attr
1248<6>[ 16.011267]@0 msm_thermal:do_cluster_freq_ctrl Limiting CPU0 max frequency to 1363200. Temp:82
1249<6>[ 16.019355]@0 msm_thermal:do_cluster_freq_ctrl Limiting CPU1 max frequency to 1363200. Temp:82
1250<6>[ 16.027606]@0 msm_thermal:do_cluster_freq_ctrl Limiting CPU2 max frequency to 1977600. Temp:82
1251<6>[ 16.036207]@0 msm_thermal:do_cluster_freq_ctrl Limiting CPU3 max frequency to 1977600. Temp:82
1252<6>[ 16.090293]@0 msm_thermal:do_cluster_freq_ctrl Limiting CPU0 max frequency to 2188800. Temp:58
1253<6>[ 16.097890]@0 msm_thermal:do_cluster_freq_ctrl Limiting CPU1 max frequency to 2188800. Temp:58
1254<6>[ 16.106513]@0 msm_thermal:do_cluster_freq_ctrl Limiting CPU2 max frequency to 2342400. Temp:58
1255<6>[ 16.115181]@0 msm_thermal:do_cluster_freq_ctrl Limiting CPU3 max frequency to 2342400. Temp:58
1256<3>[ 16.672935]@0 synaptics,s3320: all finger up
1257<6>[ 19.081216]@0 SMBCHG: update_heartbeat: inserted charger type = 4 (SDP), charger_type = 4
1258<6>[ 19.098653]@0 SMBCHG: update_heartbeat: charger_type:4,bat_voltage:4088,charger_voltage:4849,current:365,temp:331,capacity:80
1259<3>[19700216_13:50:45.330189]@0 synaptics,s3320: all finger up
1260<13>[19700216_13:50:46.770243]@0 init: Starting service 'qseecomd'...
1261<4>[19700216_13:50:46.781722]@3 audit_printk_skb: 33 callbacks suppressed
1262<5>[19700216_13:50:46.786969]@3 audit: type=1400 audit(4024246.769:23): avc: denied { read } for pid=435 comm="qseecomd" name="sg8" dev="tmpfs" ino=14690 scontext=u:r:recovery:s0 tcontext=u:object_r:device:s0 tclass=chr_file permissive=1
1263<5>[19700216_13:50:46.787009]@3 audit: type=1400 audit(4024246.769:24): avc: denied { open } for pid=435 comm="qseecomd" path="/dev/sg8" dev="tmpfs" ino=14690 scontext=u:r:recovery:s0 tcontext=u:object_r:device:s0 tclass=chr_file permissive=1
1264<5>[19700216_13:50:46.792403]@3 audit: type=1400 audit(4024246.779:25): avc: denied { sys_rawio } for pid=435 comm="qseecomd" capability=17 scontext=u:r:recovery:s0 tcontext=u:r:recovery:s0 tclass=capability permissive=1
1265<5>[19700216_13:50:46.792430]@3 audit: type=1400 audit(4024246.779:26): avc: denied { ioctl } for pid=435 comm="qseecomd" path="/dev/sg8" dev="tmpfs" ino=14690 ioctlcmd=5382 scontext=u:r:recovery:s0 tcontext=u:object_r:device:s0 tclass=chr_file permissive=1
1266<5>[19700216_13:50:46.792646]@3 audit: type=1400 audit(4024246.779:27): avc: denied { setattr } for pid=435 comm="qseecomd" name="sg2" dev="tmpfs" ino=14694 scontext=u:r:recovery:s0 tcontext=u:object_r:device:s0 tclass=chr_file permissive=1
1267<5>[19700216_13:50:46.792664]@3 audit: type=1400 audit(4024246.779:28): avc: denied { write } for pid=435 comm="qseecomd" name="sg2" dev="tmpfs" ino=14694 scontext=u:r:recovery:s0 tcontext=u:object_r:device:s0 tclass=chr_file permissive=1
1268<6>[19700216_13:50:46.793902]@3 capability: warning: `qseecomd' uses 32-bit capabilities (legacy support in use)
1269<11>[19700216_13:50:46.842032]@0 init: avc: denied { set } for property=sys.listeners.registered scontext=u:r:recovery:s0 tcontext=u:object_r:system_prop:s0 tclass=property_service
1270<6>[19700216_13:50:47.239054]@2 get_param_by_index_and_offset[75] sid_index = 7 offset = 24 buf = ffffffc0b4db7d10 length = 4
1271<6>[19700216_13:50:47.248888]@2 SMBCHG: charger_type_record: charger_type_record: charger_type_record: param_value = 19700216_13:50:47|1,dash_present=0
1272<6>[19700216_13:50:47.261936]@2 set_param_by_index_and_offset[99]sid_index = 7 offset = 768 buf = ffffffc0b4db7d70 length = 4
1273<5>[19700216_13:50:47.272819]@2 audit: type=1400 audit(4024247.269:29): avc: denied { read write } for pid=396 comm="kworker/2:3" name="sda11" dev="tmpfs" ino=14502 scontext=u:r:kernel:s0 tcontext=u:object_r:block_device:s0 tclass=blk_file permissive=1
1274<5>[19700216_13:50:47.272838]@2 audit: type=1400 audit(4024247.269:30): avc: denied { open } for pid=396 comm="kworker/2:3" path="/dev/block/sda11" dev="tmpfs" ino=14502 scontext=u:r:kernel:s0 tcontext=u:object_r:block_device:s0 tclass=blk_file permissive=1
1275<6>[19700216_13:50:47.276803]@2 set_param_by_index_and_offset[99]sid_index = 7 offset = 772 buf = ffffffc0b4db7d74 length = 4
1276<6>[19700216_13:50:47.277368]@2 set_param_by_index_and_offset[99]sid_index = 7 offset = 776 buf = ffffffc0b4db7d78 length = 4
1277<6>[19700216_13:50:47.277882]@2 set_param_by_index_and_offset[99]sid_index = 7 offset = 780 buf = ffffffc0b4db7d7c length = 4
1278<6>[19700216_13:50:47.278432]@2 set_param_by_index_and_offset[99]sid_index = 7 offset = 784 buf = ffffffc0b4db7d80 length = 4
1279<6>[19700216_13:50:47.278946]@2 set_param_by_index_and_offset[99]sid_index = 7 offset = 24 buf = ffffffc0b4db7d10 length = 4
1280<6>[19700216_13:50:47.980041]@0 msm_thermal:do_cluster_freq_ctrl Limiting CPU0 max frequency to 1363200. Temp:80
1281<6>[19700216_13:50:47.988751]@0 msm_thermal:do_cluster_freq_ctrl Limiting CPU1 max frequency to 1363200. Temp:80
1282<6>[19700216_13:50:47.998396]@0 msm_thermal:do_cluster_freq_ctrl Limiting CPU2 max frequency to 1977600. Temp:80
1283<6>[19700216_13:50:48.008086]@0 msm_thermal:do_cluster_freq_ctrl Limiting CPU3 max frequency to 1977600. Temp:80
1284<6>[19700216_13:50:48.160031]@0 msm_thermal:do_cluster_freq_ctrl Limiting CPU0 max frequency to 2188800. Temp:67
1285<6>[19700216_13:50:48.168714]@0 msm_thermal:do_cluster_freq_ctrl Limiting CPU1 max frequency to 2188800. Temp:67
1286<6>[19700216_13:50:48.178508]@0 msm_thermal:do_cluster_freq_ctrl Limiting CPU2 max frequency to 2342400. Temp:67
1287<6>[19700216_13:50:48.188092]@0 msm_thermal:do_cluster_freq_ctrl Limiting CPU3 max frequency to 2342400. Temp:67
1288<6>[19700216_13:50:48.389979]@0 msm_thermal:do_cluster_freq_ctrl Limiting CPU0 max frequency to 1363200. Temp:81
1289<6>[19700216_13:50:48.398660]@0 msm_thermal:do_cluster_freq_ctrl Limiting CPU1 max frequency to 1363200. Temp:81
1290<6>[19700216_13:50:48.408422]@0 msm_thermal:do_cluster_freq_ctrl Limiting CPU2 max frequency to 1977600. Temp:81
1291<6>[19700216_13:50:48.418046]@0 msm_thermal:do_cluster_freq_ctrl Limiting CPU3 max frequency to 1977600. Temp:81
1292<6>[19700216_13:50:48.970032]@0 msm_thermal:do_cluster_freq_ctrl Limiting CPU0 max frequency to 2188800. Temp:67
1293<6>[19700216_13:50:48.978787]@0 msm_thermal:do_cluster_freq_ctrl Limiting CPU1 max frequency to 2188800. Temp:67
1294<6>[19700216_13:50:48.978811]@0 msm_thermal:do_cluster_freq_ctrl Limiting CPU2 max frequency to 2342400. Temp:67
1295<6>[19700216_13:50:48.978830]@0 msm_thermal:do_cluster_freq_ctrl Limiting CPU3 max frequency to 2342400. Temp:67
1296<6>[19700216_13:50:49.079964]@0 msm_thermal:do_cluster_freq_ctrl Limiting CPU0 max frequency to 1363200. Temp:80
1297<6>[19700216_13:50:49.088692]@0 msm_thermal:do_cluster_freq_ctrl Limiting CPU1 max frequency to 1363200. Temp:80
1298<6>[19700216_13:50:49.088716]@0 msm_thermal:do_cluster_freq_ctrl Limiting CPU2 max frequency to 1977600. Temp:80
1299<6>[19700216_13:50:49.088735]@0 msm_thermal:do_cluster_freq_ctrl Limiting CPU3 max frequency to 1977600. Temp:80
1300<6>[19700216_13:50:49.139966]@0 msm_thermal:do_cluster_freq_ctrl Limiting CPU0 max frequency to 2188800. Temp:65
1301<6>[19700216_13:50:49.148704]@0 msm_thermal:do_cluster_freq_ctrl Limiting CPU1 max frequency to 2188800. Temp:65
1302<6>[19700216_13:50:49.158322]@0 msm_thermal:do_cluster_freq_ctrl Limiting CPU2 max frequency to 2342400. Temp:65
1303<6>[19700216_13:50:49.167960]@0 msm_thermal:do_cluster_freq_ctrl Limiting CPU3 max frequency to 2342400. Temp:65
1304<6>[19700216_13:50:50.019962]@0 msm_thermal:do_cluster_freq_ctrl Limiting CPU0 max frequency to 1363200. Temp:84
1305<6>[19700216_13:50:50.028649]@0 msm_thermal:do_cluster_freq_ctrl Limiting CPU1 max frequency to 1363200. Temp:84
1306<6>[19700216_13:50:50.028672]@0 msm_thermal:do_cluster_freq_ctrl Limiting CPU2 max frequency to 1977600. Temp:84
1307<6>[19700216_13:50:50.028692]@0 msm_thermal:do_cluster_freq_ctrl Limiting CPU3 max frequency to 1977600. Temp:84
1308<6>[19700216_13:50:50.089257]@0 msm_thermal:do_cluster_freq_ctrl Limiting CPU0 max frequency to 1056000. Temp:80
1309<6>[19700216_13:50:50.097966]@0 msm_thermal:do_cluster_freq_ctrl Limiting CPU1 max frequency to 1056000. Temp:80
1310<6>[19700216_13:50:50.107560]@0 msm_thermal:do_cluster_freq_ctrl Limiting CPU2 max frequency to 1670400. Temp:80
1311<6>[19700216_13:50:50.107565]@0 msm_thermal:do_cluster_freq_ctrl Limiting CPU3 max frequency to 1670400. Temp:80
1312<6>[19700216_13:50:50.470146]@0 msm_thermal:do_cluster_freq_ctrl Limiting CPU0 max frequency to 1363200. Temp:66
1313<6>[19700216_13:50:50.478801]@0 msm_thermal:do_cluster_freq_ctrl Limiting CPU1 max frequency to 1363200. Temp:66
1314<6>[19700216_13:50:50.488500]@0 msm_thermal:do_cluster_freq_ctrl Limiting CPU2 max frequency to 1977600. Temp:66
1315<6>[19700216_13:50:50.498299]@0 msm_thermal:do_cluster_freq_ctrl Limiting CPU3 max frequency to 1977600. Temp:66
1316<3>[19700216_13:50:50.551743]@3 QSEECOM: __qseecom_process_incomplete_cmd: fail:resp res= -65,app_id = 0,lstr = 12288
1317<6>[19700216_13:50:50.560816]@3 get_ice_device_from_storage_type: found ice device ffffffc172c09e00
1318<6>[19700216_13:50:50.649935]@0 msm_thermal:do_cluster_freq_ctrl Limiting CPU0 max frequency to 2188800. Temp:68
1319<6>[19700216_13:50:50.658617]@0 msm_thermal:do_cluster_freq_ctrl Limiting CPU1 max frequency to 2188800. Temp:68
1320<6>[19700216_13:50:50.668658]@0 msm_thermal:do_cluster_freq_ctrl Limiting CPU2 max frequency to 2342400. Temp:68
1321<6>[19700216_13:50:50.678053]@0 msm_thermal:do_cluster_freq_ctrl Limiting CPU3 max frequency to 2342400. Temp:68
1322<3>[19700216_13:50:50.718655]@3 QSEECOM: __qseecom_process_incomplete_cmd: fail:resp res= -71,app_id = 0,lstr = 12288
1323<3>[19700216_13:50:50.727732]@3 QSEECOM: __qseecom_set_clear_ce_key: process_incomplete_cmd FAILED, resp.result -71
1324<6>[19700216_13:50:50.737676]@3 get_ice_device_from_storage_type: found ice device ffffffc172c09e00
1325<3>[19700216_13:50:50.738008]@3 QSEECOM: qseecom_create_key: Failed to create key: pipe 2, ce 0: -22
1326<3>[19700216_13:50:50.738012]@3 QSEECOM: qseecom_ioctl: failed to create encryption key: -22
1327<6>[19700216_13:50:50.779458]@0 msm_thermal:do_core_control Set Offline: CPU3 Temp: 92
1328<4>[19700216_13:50:50.786898]@3 IRQ84 no longer affine to CPU3
1329<4>[19700216_13:50:50.786910]@3 IRQ85 no longer affine to CPU3
1330<4>[19700216_13:50:50.786914]@3 IRQ86 no longer affine to CPU3
1331<4>[19700216_13:50:50.786919]@3 IRQ87 no longer affine to CPU3
1332<4>[19700216_13:50:50.786923]@3 IRQ88 no longer affine to CPU3
1333<4>[19700216_13:50:50.786927]@3 IRQ89 no longer affine to CPU3
1334<4>[19700216_13:50:50.786931]@3 IRQ90 no longer affine to CPU3
1335<4>[19700216_13:50:50.786935]@3 IRQ91 no longer affine to CPU3
1336<4>[19700216_13:50:50.786939]@3 IRQ92 no longer affine to CPU3
1337<4>[19700216_13:50:50.786943]@3 IRQ93 no longer affine to CPU3
1338<6>[19700216_13:50:50.791748]@0 msm_thermal:do_cluster_freq_ctrl Limiting CPU0 max frequency to 1363200. Temp:92
1339<6>[19700216_13:50:50.800655]@0 msm_thermal:do_cluster_freq_ctrl Limiting CPU1 max frequency to 1363200. Temp:92
1340<6>[19700216_13:50:50.810253]@0 msm_thermal:do_cluster_freq_ctrl Limiting CPU2 max frequency to 1977600. Temp:92
1341<6>[19700216_13:50:50.810258]@0 msm_thermal:do_cluster_freq_ctrl Limiting CPU3 max frequency to 1977600. Temp:92
1342<6>[19700216_13:50:50.873933]@0 msm_thermal:do_core_control Allow Online CPU3 Temp: 60
1343<6>[19700216_13:50:50.874298]@3 CPU3: found redistributor 101 region 0:0x0000000009cc0000
1344<6>[19700216_13:50:50.884044]@0 msm_thermal:do_cluster_freq_ctrl Limiting CPU0 max frequency to 2188800. Temp:60
1345<6>[19700216_13:50:50.884053]@0 msm_thermal:do_cluster_freq_ctrl Limiting CPU1 max frequency to 2188800. Temp:60
1346<6>[19700216_13:50:50.884058]@0 msm_thermal:do_cluster_freq_ctrl Limiting CPU2 max frequency to 2342400. Temp:60
1347<6>[19700216_13:50:50.884063]@0 msm_thermal:do_cluster_freq_ctrl Limiting CPU3 max frequency to 2342400. Temp:60
1348<6>[19700216_13:50:51.039988]@0 msm_thermal:do_cluster_freq_ctrl Limiting CPU0 max frequency to 1363200. Temp:82
1349<6>[19700216_13:50:51.048649]@0 msm_thermal:do_cluster_freq_ctrl Limiting CPU1 max frequency to 1363200. Temp:82
1350<6>[19700216_13:50:51.058451]@0 msm_thermal:do_cluster_freq_ctrl Limiting CPU2 max frequency to 1977600. Temp:82
1351<6>[19700216_13:50:51.068139]@0 msm_thermal:do_cluster_freq_ctrl Limiting CPU3 max frequency to 1977600. Temp:82
1352<6>[19700216_13:50:51.480120]@0 msm_thermal:do_cluster_freq_ctrl Limiting CPU0 max frequency to 2188800. Temp:66
1353<6>[19700216_13:50:51.488902]@0 msm_thermal:do_cluster_freq_ctrl Limiting CPU1 max frequency to 2188800. Temp:66
1354<6>[19700216_13:50:51.498771]@0 msm_thermal:do_cluster_freq_ctrl Limiting CPU2 max frequency to 2342400. Temp:66
1355<6>[19700216_13:50:51.508074]@0 msm_thermal:do_cluster_freq_ctrl Limiting CPU3 max frequency to 2342400. Temp:66
1356<6>[19700216_13:50:51.609721]@0 msm_thermal:do_cluster_freq_ctrl Limiting CPU0 max frequency to 1363200. Temp:82
1357<6>[19700216_13:50:51.618464]@0 msm_thermal:do_cluster_freq_ctrl Limiting CPU1 max frequency to 1363200. Temp:82
1358<6>[19700216_13:50:51.628070]@0 msm_thermal:do_cluster_freq_ctrl Limiting CPU2 max frequency to 1977600. Temp:82
1359<6>[19700216_13:50:51.637758]@0 msm_thermal:do_cluster_freq_ctrl Limiting CPU3 max frequency to 1977600. Temp:82
1360<6>[19700216_13:50:51.940030]@0 msm_thermal:do_cluster_freq_ctrl Limiting CPU0 max frequency to 2188800. Temp:69
1361<6>[19700216_13:50:51.948724]@0 msm_thermal:do_cluster_freq_ctrl Limiting CPU1 max frequency to 2188800. Temp:69
1362<6>[19700216_13:50:51.958484]@0 msm_thermal:do_cluster_freq_ctrl Limiting CPU2 max frequency to 2342400. Temp:69
1363<6>[19700216_13:50:51.968040]@0 msm_thermal:do_cluster_freq_ctrl Limiting CPU3 max frequency to 2342400. Temp:69
1364<6>[19700216_13:50:53.069971]@0 msm_thermal:do_cluster_freq_ctrl Limiting CPU0 max frequency to 1363200. Temp:83
1365<6>[19700216_13:50:53.078624]@0 msm_thermal:do_cluster_freq_ctrl Limiting CPU1 max frequency to 1363200. Temp:83
1366<6>[19700216_13:50:53.088321]@0 msm_thermal:do_cluster_freq_ctrl Limiting CPU2 max frequency to 1977600. Temp:83
1367<6>[19700216_13:50:53.098009]@0 msm_thermal:do_cluster_freq_ctrl Limiting CPU3 max frequency to 1977600. Temp:83
1368<6>[19700216_13:50:53.200002]@0 msm_thermal:do_cluster_freq_ctrl Limiting CPU0 max frequency to 1056000. Temp:80
1369<6>[19700216_13:50:53.208685]@0 msm_thermal:do_cluster_freq_ctrl Limiting CPU1 max frequency to 1056000. Temp:80
1370<6>[19700216_13:50:53.208708]@0 msm_thermal:do_cluster_freq_ctrl Limiting CPU2 max frequency to 1670400. Temp:80
1371<6>[19700216_13:50:53.208727]@0 msm_thermal:do_cluster_freq_ctrl Limiting CPU3 max frequency to 1670400. Temp:80
1372<6>[19700216_13:50:53.260558]@0 msm_thermal:do_cluster_freq_ctrl Limiting CPU0 max frequency to 1363200. Temp:68
1373<6>[19700216_13:50:53.269430]@0 msm_thermal:do_cluster_freq_ctrl Limiting CPU1 max frequency to 1363200. Temp:68
1374<6>[19700216_13:50:53.279470]@0 msm_thermal:do_cluster_freq_ctrl Limiting CPU2 max frequency to 1977600. Temp:68
1375<6>[19700216_13:50:53.288515]@0 msm_thermal:do_cluster_freq_ctrl Limiting CPU3 max frequency to 1977600. Temp:68
1376<3>[19700216_13:50:53.389916]@2 scm_call failed: func id 0x72000501, ret: -2, syscall returns: 0xffffffffffffffbf, 0x0, 0x0
1377<6>[19700216_13:50:53.399529]@2 get_ice_device_from_storage_type: found ice device ffffffc172c09e00
1378<3>[19700216_13:50:53.543402]@2 QSEECOM: __qseecom_process_incomplete_cmd: fail:resp res= -71,app_id = 0,lstr = 12288
1379<3>[19700216_13:50:53.552514]@2 QSEECOM: __qseecom_set_clear_ce_key: process_incomplete_cmd FAILED, resp.result -71
1380<6>[19700216_13:50:53.552522]@2 get_ice_device_from_storage_type: found ice device ffffffc172c09e00
1381<3>[19700216_13:50:53.552965]@2 QSEECOM: qseecom_create_key: Failed to create key: pipe 2, ce 0: -22
1382<3>[19700216_13:50:53.552970]@2 QSEECOM: qseecom_ioctl: failed to create encryption key: -22
1383<6>[19700216_13:50:53.559268]@0 msm_thermal:do_cluster_freq_ctrl Limiting CPU0 max frequency to 2188800. Temp:65
1384<6>[19700216_13:50:53.559276]@0 msm_thermal:do_cluster_freq_ctrl Limiting CPU1 max frequency to 2188800. Temp:65
1385<6>[19700216_13:50:53.559281]@0 msm_thermal:do_cluster_freq_ctrl Limiting CPU2 max frequency to 2342400. Temp:65
1386<6>[19700216_13:50:53.559285]@0 msm_thermal:do_cluster_freq_ctrl Limiting CPU3 max frequency to 2342400. Temp:65
1387<3>[19700216_13:51:00.546848]@1 synaptics,s3320: all finger up
1388<6>[19700216_13:51:01.080496]@0 msm_thermal:do_cluster_freq_ctrl Limiting CPU0 max frequency to 1363200. Temp:83
1389<6>[19700216_13:51:01.089210]@0 msm_thermal:do_cluster_freq_ctrl Limiting CPU1 max frequency to 1363200. Temp:83
1390<6>[19700216_13:51:01.098796]@0 msm_thermal:do_cluster_freq_ctrl Limiting CPU2 max frequency to 1977600. Temp:83
1391<6>[19700216_13:51:01.108531]@0 msm_thermal:do_cluster_freq_ctrl Limiting CPU3 max frequency to 1977600. Temp:83
1392<6>[19700216_13:51:01.209999]@0 msm_thermal:do_cluster_freq_ctrl Limiting CPU0 max frequency to 2188800. Temp:69
1393<6>[19700216_13:51:01.218651]@0 msm_thermal:do_cluster_freq_ctrl Limiting CPU1 max frequency to 2188800. Temp:69
1394<6>[19700216_13:51:01.228341]@0 msm_thermal:do_cluster_freq_ctrl Limiting CPU2 max frequency to 2342400. Temp:69
1395<6>[19700216_13:51:01.237966]@0 msm_thermal:do_cluster_freq_ctrl Limiting CPU3 max frequency to 2342400. Temp:69
1396<6>[19700216_13:51:01.439959]@0 msm_thermal:do_cluster_freq_ctrl Limiting CPU0 max frequency to 1363200. Temp:82
1397<6>[19700216_13:51:01.448739]@0 msm_thermal:do_cluster_freq_ctrl Limiting CPU1 max frequency to 1363200. Temp:82
1398<6>[19700216_13:51:01.448763]@0 msm_thermal:do_cluster_freq_ctrl Limiting CPU2 max frequency to 1977600. Temp:82
1399<6>[19700216_13:51:01.450265]@0 msm_thermal:do_cluster_freq_ctrl Limiting CPU3 max frequency to 1977600. Temp:82
1400<6>[19700216_13:51:01.509262]@0 msm_thermal:do_cluster_freq_ctrl Limiting CPU0 max frequency to 2188800. Temp:67
1401<6>[19700216_13:51:01.517941]@0 msm_thermal:do_cluster_freq_ctrl Limiting CPU1 max frequency to 2188800. Temp:67
1402<6>[19700216_13:51:01.527559]@0 msm_thermal:do_cluster_freq_ctrl Limiting CPU2 max frequency to 2342400. Temp:67
1403<6>[19700216_13:51:01.537187]@0 msm_thermal:do_cluster_freq_ctrl Limiting CPU3 max frequency to 2342400. Temp:67
1404<3>[19700216_13:51:04.116639]@1 synaptics,s3320: all finger up
1405<6>[19700216_13:51:04.490279]@0 msm_thermal:do_cluster_freq_ctrl Limiting CPU0 max frequency to 1363200. Temp:83
1406<6>[19700216_13:51:04.499064]@0 msm_thermal:do_cluster_freq_ctrl Limiting CPU1 max frequency to 1363200. Temp:83
1407<6>[19700216_13:51:04.499089]@0 msm_thermal:do_cluster_freq_ctrl Limiting CPU2 max frequency to 1977600. Temp:83
1408<6>[19700216_13:51:04.499109]@0 msm_thermal:do_cluster_freq_ctrl Limiting CPU3 max frequency to 1977600. Temp:83
1409<6>[19700216_13:51:04.559282]@0 msm_thermal:do_cluster_freq_ctrl Limiting CPU0 max frequency to 2188800. Temp:67
1410<6>[19700216_13:51:04.567911]@0 msm_thermal:do_cluster_freq_ctrl Limiting CPU1 max frequency to 2188800. Temp:67
1411<6>[19700216_13:51:04.577563]@0 msm_thermal:do_cluster_freq_ctrl Limiting CPU2 max frequency to 2342400. Temp:67
1412<6>[19700216_13:51:04.587199]@0 msm_thermal:do_cluster_freq_ctrl Limiting CPU3 max frequency to 2342400. Temp:67
1413<3>[19700216_13:51:07.829339]@1 synaptics,s3320: all finger up
1414<6>[19700216_13:51:08.689987]@0 msm_thermal:do_cluster_freq_ctrl Limiting CPU0 max frequency to 1363200. Temp:86
1415<6>[19700216_13:51:08.698671]@0 msm_thermal:do_cluster_freq_ctrl Limiting CPU1 max frequency to 1363200. Temp:86
1416<6>[19700216_13:51:08.698695]@0 msm_thermal:do_cluster_freq_ctrl Limiting CPU2 max frequency to 1977600. Temp:86
1417<6>[19700216_13:51:08.698715]@0 msm_thermal:do_cluster_freq_ctrl Limiting CPU3 max frequency to 1977600. Temp:86
1418<6>[19700216_13:51:09.049978]@0 msm_thermal:do_cluster_freq_ctrl Limiting CPU0 max frequency to 1056000. Temp:80
1419<6>[19700216_13:51:09.058660]@0 msm_thermal:do_cluster_freq_ctrl Limiting CPU1 max frequency to 1056000. Temp:80
1420<6>[19700216_13:51:09.068407]@0 msm_thermal:do_cluster_freq_ctrl Limiting CPU2 max frequency to 1670400. Temp:80
1421<6>[19700216_13:51:09.077978]@0 msm_thermal:do_cluster_freq_ctrl Limiting CPU3 max frequency to 1670400. Temp:80
1422<6>[19700216_13:51:09.329962]@0 msm_thermal:do_cluster_freq_ctrl Limiting CPU0 max frequency to 1363200. Temp:69
1423<6>[19700216_13:51:09.338726]@0 msm_thermal:do_cluster_freq_ctrl Limiting CPU1 max frequency to 1363200. Temp:69
1424<6>[19700216_13:51:09.338750]@0 msm_thermal:do_cluster_freq_ctrl Limiting CPU2 max frequency to 1977600. Temp:69
1425<6>[19700216_13:51:09.338770]@0 msm_thermal:do_cluster_freq_ctrl Limiting CPU3 max frequency to 1977600. Temp:69
1426<6>[19700216_13:51:09.459424]@0 msm_thermal:do_cluster_freq_ctrl Limiting CPU0 max frequency to 1056000. Temp:80
1427<6>[19700216_13:51:09.468173]@0 msm_thermal:do_cluster_freq_ctrl Limiting CPU1 max frequency to 1056000. Temp:80
1428<6>[19700216_13:51:09.477806]@0 msm_thermal:do_cluster_freq_ctrl Limiting CPU2 max frequency to 1670400. Temp:80
1429<6>[19700216_13:51:09.477828]@0 msm_thermal:do_cluster_freq_ctrl Limiting CPU3 max frequency to 1670400. Temp:80
1430<6>[19700216_13:51:09.729937]@0 msm_thermal:do_cluster_freq_ctrl Limiting CPU0 max frequency to 1363200. Temp:62
1431<6>[19700216_13:51:09.738664]@0 msm_thermal:do_cluster_freq_ctrl Limiting CPU1 max frequency to 1363200. Temp:62
1432<6>[19700216_13:51:09.748379]@0 msm_thermal:do_cluster_freq_ctrl Limiting CPU2 max frequency to 1977600. Temp:62
1433<6>[19700216_13:51:09.748401]@0 msm_thermal:do_cluster_freq_ctrl Limiting CPU3 max frequency to 1977600. Temp:62
1434<6>[19700216_13:51:09.809285]@0 msm_thermal:do_cluster_freq_ctrl Limiting CPU0 max frequency to 2188800. Temp:57
1435<6>[19700216_13:51:09.809293]@0 msm_thermal:do_cluster_freq_ctrl Limiting CPU1 max frequency to 2188800. Temp:57
1436<6>[19700216_13:51:09.809298]@0 msm_thermal:do_cluster_freq_ctrl Limiting CPU2 max frequency to 2342400. Temp:57
1437<6>[19700216_13:51:09.809302]@0 msm_thermal:do_cluster_freq_ctrl Limiting CPU3 max frequency to 2342400. Temp:57
1438<6>[19700216_13:51:10.860029]@0 msm_thermal:do_cluster_freq_ctrl Limiting CPU0 max frequency to 1363200. Temp:82
1439<6>[19700216_13:51:10.868689]@0 msm_thermal:do_cluster_freq_ctrl Limiting CPU1 max frequency to 1363200. Temp:82
1440<6>[19700216_13:51:10.878388]@0 msm_thermal:do_cluster_freq_ctrl Limiting CPU2 max frequency to 1977600. Temp:82
1441<6>[19700216_13:51:10.888113]@0 msm_thermal:do_cluster_freq_ctrl Limiting CPU3 max frequency to 1977600. Temp:82
1442<3>[19700216_13:51:11.256016]@2 scm_call failed: func id 0x72000501, ret: -2, syscall returns: 0xffffffffffffffbf, 0x0, 0x0
1443<6>[19700216_13:51:11.256027]@2 get_ice_device_from_storage_type: found ice device ffffffc172c09e00
1444<3>[19700216_13:51:11.394607]@2 QSEECOM: __qseecom_process_incomplete_cmd: fail:resp res= -71,app_id = 0,lstr = 12288
1445<3>[19700216_13:51:11.403759]@2 QSEECOM: __qseecom_set_clear_ce_key: process_incomplete_cmd FAILED, resp.result -71
1446<6>[19700216_13:51:11.403766]@2 get_ice_device_from_storage_type: found ice device ffffffc172c09e00
1447<3>[19700216_13:51:11.404329]@2 QSEECOM: qseecom_create_key: Failed to create key: pipe 2, ce 0: -22
1448<3>[19700216_13:51:11.404335]@2 QSEECOM: qseecom_ioctl: failed to create encryption key: -22
1449<6>[19700216_13:51:11.410152]@0 msm_thermal:do_cluster_freq_ctrl Limiting CPU0 max frequency to 2188800. Temp:64
1450<6>[19700216_13:51:11.410182]@0 msm_thermal:do_cluster_freq_ctrl Limiting CPU1 max frequency to 2188800. Temp:64
1451<6>[19700216_13:51:11.410204]@0 msm_thermal:do_cluster_freq_ctrl Limiting CPU2 max frequency to 2342400. Temp:64
1452<6>[19700216_13:51:11.410224]@0 msm_thermal:do_cluster_freq_ctrl Limiting CPU3 max frequency to 2342400. Temp:64
1453<6>[19700216_13:51:11.520734]@0 msm_thermal:do_cluster_freq_ctrl Limiting CPU0 max frequency to 1363200. Temp:80
1454<6>[19700216_13:51:11.529463]@0 msm_thermal:do_cluster_freq_ctrl Limiting CPU1 max frequency to 1363200. Temp:80
1455<6>[19700216_13:51:11.539075]@0 msm_thermal:do_cluster_freq_ctrl Limiting CPU2 max frequency to 1977600. Temp:80
1456<6>[19700216_13:51:11.548762]@0 msm_thermal:do_cluster_freq_ctrl Limiting CPU3 max frequency to 1977600. Temp:80
1457<6>[19700216_13:51:11.810041]@0 msm_thermal:do_cluster_freq_ctrl Limiting CPU0 max frequency to 2188800. Temp:69
1458<6>[19700216_13:51:11.818704]@0 msm_thermal:do_cluster_freq_ctrl Limiting CPU1 max frequency to 2188800. Temp:69
1459<6>[19700216_13:51:11.828462]@0 msm_thermal:do_cluster_freq_ctrl Limiting CPU2 max frequency to 2342400. Temp:69
1460<6>[19700216_13:51:11.828484]@0 msm_thermal:do_cluster_freq_ctrl Limiting CPU3 max frequency to 2342400. Temp:69
1461<6>[19700216_13:51:12.830006]@0 msm_thermal:do_cluster_freq_ctrl Limiting CPU0 max frequency to 1363200. Temp:87
1462<6>[19700216_13:51:12.838668]@0 msm_thermal:do_cluster_freq_ctrl Limiting CPU1 max frequency to 1363200. Temp:87
1463<6>[19700216_13:51:12.848392]@0 msm_thermal:do_cluster_freq_ctrl Limiting CPU2 max frequency to 1977600. Temp:87
1464<6>[19700216_13:51:12.848415]@0 msm_thermal:do_cluster_freq_ctrl Limiting CPU3 max frequency to 1977600. Temp:87
1465<6>[19700216_13:51:13.650285]@0 msm_thermal:do_cluster_freq_ctrl Limiting CPU0 max frequency to 2188800. Temp:69
1466<6>[19700216_13:51:13.658946]@0 msm_thermal:do_cluster_freq_ctrl Limiting CPU1 max frequency to 2188800. Temp:69
1467<6>[19700216_13:51:13.668704]@0 msm_thermal:do_cluster_freq_ctrl Limiting CPU2 max frequency to 2342400. Temp:69
1468<6>[19700216_13:51:13.678303]@0 msm_thermal:do_cluster_freq_ctrl Limiting CPU3 max frequency to 2342400. Temp:69
1469<6>[19700216_13:51:14.730032]@0 msm_thermal:do_cluster_freq_ctrl Limiting CPU0 max frequency to 1363200. Temp:80
1470<6>[19700216_13:51:14.738775]@0 msm_thermal:do_cluster_freq_ctrl Limiting CPU1 max frequency to 1363200. Temp:80
1471<6>[19700216_13:51:14.748810]@0 msm_thermal:do_cluster_freq_ctrl Limiting CPU2 max frequency to 1977600. Temp:80
1472<6>[19700216_13:51:14.758016]@0 msm_thermal:do_cluster_freq_ctrl Limiting CPU3 max frequency to 1977600. Temp:80
1473<6>[19700216_13:51:14.809274]@0 msm_thermal:do_cluster_freq_ctrl Limiting CPU0 max frequency to 1056000. Temp:81
1474<6>[19700216_13:51:14.817936]@0 msm_thermal:do_cluster_freq_ctrl Limiting CPU1 max frequency to 1056000. Temp:81
1475<6>[19700216_13:51:14.817941]@0 msm_thermal:do_cluster_freq_ctrl Limiting CPU2 max frequency to 1670400. Temp:81
1476<6>[19700216_13:51:14.817945]@0 msm_thermal:do_cluster_freq_ctrl Limiting CPU3 max frequency to 1670400. Temp:81
1477<6>[19700216_13:51:14.869500]@0 msm_thermal:do_cluster_freq_ctrl Limiting CPU0 max frequency to 1363200. Temp:68
1478<6>[19700216_13:51:14.878195]@0 msm_thermal:do_cluster_freq_ctrl Limiting CPU1 max frequency to 1363200. Temp:68
1479<6>[19700216_13:51:14.887803]@0 msm_thermal:do_cluster_freq_ctrl Limiting CPU2 max frequency to 1977600. Temp:68
1480<6>[19700216_13:51:14.897448]@0 msm_thermal:do_cluster_freq_ctrl Limiting CPU3 max frequency to 1977600. Temp:68
1481<3>[19700216_13:51:15.147894]@2 scm_call failed: func id 0x72000501, ret: -2, syscall returns: 0xffffffffffffffbf, 0x0, 0x0
1482<6>[19700216_13:51:15.157536]@2 get_ice_device_from_storage_type: found ice device ffffffc172c09e00
1483<6>[19700216_13:51:15.160067]@0 msm_thermal:do_cluster_freq_ctrl Limiting CPU0 max frequency to 2188800. Temp:69
1484<6>[19700216_13:51:15.160095]@0 msm_thermal:do_cluster_freq_ctrl Limiting CPU1 max frequency to 2188800. Temp:69
1485<6>[19700216_13:51:15.160118]@0 msm_thermal:do_cluster_freq_ctrl Limiting CPU2 max frequency to 2342400. Temp:69
1486<6>[19700216_13:51:15.160137]@0 msm_thermal:do_cluster_freq_ctrl Limiting CPU3 max frequency to 2342400. Temp:69
1487<6>[19700216_13:51:15.279914]@0 msm_thermal:do_cluster_freq_ctrl Limiting CPU0 max frequency to 1363200. Temp:85
1488<6>[19700216_13:51:15.279939]@0 msm_thermal:do_cluster_freq_ctrl Limiting CPU1 max frequency to 1363200. Temp:85
1489<6>[19700216_13:51:15.279956]@0 msm_thermal:do_cluster_freq_ctrl Limiting CPU2 max frequency to 1977600. Temp:85
1490<6>[19700216_13:51:15.279973]@0 msm_thermal:do_cluster_freq_ctrl Limiting CPU3 max frequency to 1977600. Temp:85
1491<6>[19700216_13:51:15.292802]@2 get_ice_device_from_storage_type: found ice device ffffffc172c09e00
1492<3>[19700216_13:51:15.293183]@2 QSEECOM: qseecom_create_key: Set the key successfully
1493<5>[19700216_13:51:15.293388]@2 audit: type=1400 audit(4024275.279:31): avc: denied { read write } for pid=443 comm="recovery" name="device-mapper" dev="tmpfs" ino=14780 scontext=u:r:recovery:s0 tcontext=u:object_r:dm_device:s0 tclass=chr_file permissive=1
1494<5>[19700216_13:51:15.293407]@2 audit: type=1400 audit(4024275.279:32): avc: denied { open } for pid=443 comm="recovery" path="/dev/device-mapper" dev="tmpfs" ino=14780 scontext=u:r:recovery:s0 tcontext=u:object_r:dm_device:s0 tclass=chr_file permissive=1
1495<5>[19700216_13:51:15.293434]@2 audit: type=1400 audit(4024275.279:33): avc: denied { ioctl } for pid=443 comm="recovery" path="/dev/device-mapper" dev="tmpfs" ino=14780 ioctlcmd=fd03 scontext=u:r:recovery:s0 tcontext=u:object_r:dm_device:s0 tclass=chr_file permissive=1
1496<6>[19700216_13:51:15.295330]@2 device-mapper: req-crypt: req_crypt_ctr: Mapping block_device /dev/block/sda15 to dm-req-crypt ok!
1497<6>
1498<4>[19700216_13:51:15.295668]@2 device-mapper: table: 254:0: adding target device sda15 caused an alignment inconsistency: physical_block_size=16384, logical_block_size=4096, alignment_offset=0, start=0
1499<4>[19700216_13:51:15.295675]@2 device-mapper: table: 254:0: adding target device sda15 caused an alignment inconsistency: physical_block_size=16384, logical_block_size=4096, alignment_offset=0, start=0
1500<6>[19700216_13:51:15.339678]@0 msm_thermal:do_cluster_freq_ctrl Limiting CPU0 max frequency to 2188800. Temp:67
1501<6>[19700216_13:51:15.339698]@0 msm_thermal:do_cluster_freq_ctrl Limiting CPU1 max frequency to 2188800. Temp:67
1502<6>[19700216_13:51:15.339712]@0 msm_thermal:do_cluster_freq_ctrl Limiting CPU2 max frequency to 2342400. Temp:67
1503<6>[19700216_13:51:15.339725]@0 msm_thermal:do_cluster_freq_ctrl Limiting CPU3 max frequency to 2342400. Temp:67
1504<6>[19700216_13:51:15.529383]@0 msm_thermal:do_cluster_freq_ctrl Limiting CPU0 max frequency to 1363200. Temp:85
1505<6>[19700216_13:51:15.538017]@0 msm_thermal:do_cluster_freq_ctrl Limiting CPU1 max frequency to 1363200. Temp:85
1506<6>[19700216_13:51:15.547723]@0 msm_thermal:do_cluster_freq_ctrl Limiting CPU2 max frequency to 1977600. Temp:85
1507<6>[19700216_13:51:15.557316]@0 msm_thermal:do_cluster_freq_ctrl Limiting CPU3 max frequency to 1977600. Temp:85
1508<5>[19700216_13:51:15.705640]@2 F2FS-fs (dm-0): recover_data: ino = e7 (i_size: recover) recovered = 322, err = 0
1509<5>[19700216_13:51:15.714373]@2 F2FS-fs (dm-0): recover_inode: ino = e7, name = system@framework@boot.oat
1510<5>[19700216_13:51:15.723490]@2 F2FS-fs (dm-0): recover_data: ino = e7 (i_size: recover) recovered = 0, err = 0
1511<5>[19700216_13:51:15.733565]@2 F2FS-fs (dm-0): recover_data: ino = e7 (i_size: recover) recovered = 239, err = 0
1512<5>[19700216_13:51:15.733573]@2 F2FS-fs (dm-0): recover_inode: ino = c9, name = system@framework@boot.oat
1513<5>[19700216_13:51:15.733590]@2 F2FS-fs (dm-0): recover_data: ino = c9 (i_size: recover) recovered = 0, err = 0
1514<5>[19700216_13:51:15.734730]@2 F2FS-fs (dm-0): recover_data: ino = c9 (i_size: recover) recovered = 884, err = 0
1515<5>[19700216_13:51:15.735705]@2 F2FS-fs (dm-0): recover_data: ino = c9 (i_size: recover) recovered = 644, err = 0
1516<5>[19700216_13:51:15.735711]@2 F2FS-fs (dm-0): recover_inode: ino = c9, name = system@framework@boot.oat
1517<5>[19700216_13:51:15.735723]@2 F2FS-fs (dm-0): recover_data: ino = c9 (i_size: recover) recovered = 0, err = 0
1518<5>[19700216_13:51:15.736159]@2 F2FS-fs (dm-0): recover_data: ino = c9 (i_size: recover) recovered = 374, err = 0
1519<5>[19700216_13:51:15.736499]@2 F2FS-fs (dm-0): recover_data: ino = c9 (i_size: recover) recovered = 133, err = 0
1520<5>[19700216_13:51:15.736504]@2 F2FS-fs (dm-0): recover_inode: ino = c9, name = system@framework@boot.oat
1521<5>[19700216_13:51:15.736517]@2 F2FS-fs (dm-0): recover_data: ino = c9 (i_size: recover) recovered = 0, err = 0
1522<5>[19700216_13:51:15.736575]@2 F2FS-fs (dm-0): recover_data: ino = c9 (i_size: recover) recovered = 38, err = 0
1523<5>[19700216_13:51:15.736579]@2 F2FS-fs (dm-0): recover_inode: ino = c9, name = system@framework@boot.oat
1524<5>[19700216_13:51:15.736591]@2 F2FS-fs (dm-0): recover_data: ino = c9 (i_size: recover) recovered = 0, err = 0
1525<5>[19700216_13:51:15.736640]@2 F2FS-fs (dm-0): recover_data: ino = c9 (i_size: recover) recovered = 31, err = 0
1526<5>[19700216_13:51:15.736645]@2 F2FS-fs (dm-0): recover_inode: ino = c9, name = system@framework@boot.oat
1527<5>[19700216_13:51:15.736656]@2 F2FS-fs (dm-0): recover_data: ino = c9 (i_size: recover) recovered = 0, err = 0
1528<5>[19700216_13:51:15.737017]@2 F2FS-fs (dm-0): recover_data: ino = c9 (i_size: recover) recovered = 306, err = 0
1529<5>[19700216_13:51:15.737021]@2 F2FS-fs (dm-0): recover_inode: ino = c9, name = system@framework@boot.oat
1530<5>[19700216_13:51:15.737033]@2 F2FS-fs (dm-0): recover_data: ino = c9 (i_size: recover) recovered = 0, err = 0
1531<5>[19700216_13:51:15.737499]@2 F2FS-fs (dm-0): recover_data: ino = c9 (i_size: recover) recovered = 122, err = 0
1532<5>[19700216_13:51:15.737504]@2 F2FS-fs (dm-0): recover_inode: ino = e7, name = system@framework@boot.oat
1533<5>[19700216_13:51:15.737516]@2 F2FS-fs (dm-0): recover_data: ino = e7 (i_size: recover) recovered = 0, err = 0
1534<5>[19700216_13:51:15.738027]@2 F2FS-fs (dm-0): recover_data: ino = e7 (i_size: recover) recovered = 313, err = 0
1535<5>[19700216_13:51:15.739499]@2 F2FS-fs (dm-0): recover_data: ino = e7 (i_size: recover) recovered = 1018, err = 0
1536<5>[19700216_13:51:15.740783]@2 F2FS-fs (dm-0): recover_data: ino = e7 (i_size: recover) recovered = 1018, err = 0
1537<5>[19700216_13:51:15.740956]@2 F2FS-fs (dm-0): recover_data: ino = e7 (i_size: recover) recovered = 134, err = 0
1538<5>[19700216_13:51:15.740961]@2 F2FS-fs (dm-0): recover_inode: ino = c9, name = system@framework@boot.oat
1539<5>[19700216_13:51:15.740973]@2 F2FS-fs (dm-0): recover_data: ino = c9 (i_size: recover) recovered = 0, err = 0
1540<5>[19700216_13:51:15.740992]@2 F2FS-fs (dm-0): recover_data: ino = c9 (i_size: recover) recovered = 1, err = 0
1541<5>[19700216_13:51:15.740996]@2 F2FS-fs (dm-0): recover_inode: ino = c9, name = system@framework@boot.oat
1542<5>[19700216_13:51:15.741007]@2 F2FS-fs (dm-0): recover_data: ino = c9 (i_size: recover) recovered = 0, err = 0
1543<5>[19700216_13:51:15.741026]@2 F2FS-fs (dm-0): recover_data: ino = c9 (i_size: recover) recovered = 3, err = 0
1544<5>[19700216_13:51:15.741029]@2 F2FS-fs (dm-0): recover_inode: ino = c9, name = system@framework@boot.oat
1545<5>[19700216_13:51:15.741041]@2 F2FS-fs (dm-0): recover_data: ino = c9 (i_size: recover) recovered = 0, err = 0
1546<5>[19700216_13:51:15.741045]@2 F2FS-fs (dm-0): recover_inode: ino = e7, name = system@framework@boot.oat
1547<5>[19700216_13:51:15.741056]@2 F2FS-fs (dm-0): recover_data: ino = e7 (i_size: recover) recovered = 0, err = 0
1548<5>[19700216_13:51:15.742135]@2 F2FS-fs (dm-0): recover_data: ino = e7 (i_size: recover) recovered = 884, err = 0
1549<5>[19700216_13:51:15.743152]@0 F2FS-fs (dm-0): recover_data: ino = e7 (i_size: recover) recovered = 644, err = 0
1550<5>[19700216_13:51:15.743162]@0 F2FS-fs (dm-0): recover_inode: ino = e7, name = system@framework@boot.oat
1551<5>[19700216_13:51:15.743182]@0 F2FS-fs (dm-0): recover_data: ino = e7 (i_size: recover) recovered = 0, err = 0
1552<5>[19700216_13:51:15.743746]@0 F2FS-fs (dm-0): recover_data: ino = e7 (i_size: recover) recovered = 374, err = 0
1553<5>[19700216_13:51:15.744157]@2 F2FS-fs (dm-0): recover_data: ino = e7 (i_size: recover) recovered = 133, err = 0
1554<5>[19700216_13:51:15.744162]@2 F2FS-fs (dm-0): recover_inode: ino = e7, name = system@framework@boot.oat
1555<5>[19700216_13:51:15.744175]@2 F2FS-fs (dm-0): recover_data: ino = e7 (i_size: recover) recovered = 0, err = 0
1556<5>[19700216_13:51:15.744229]@2 F2FS-fs (dm-0): recover_data: ino = e7 (i_size: recover) recovered = 38, err = 0
1557<5>[19700216_13:51:15.744233]@2 F2FS-fs (dm-0): recover_inode: ino = e7, name = system@framework@boot.oat
1558<5>[19700216_13:51:15.744245]@2 F2FS-fs (dm-0): recover_data: ino = e7 (i_size: recover) recovered = 0, err = 0
1559<5>[19700216_13:51:15.744291]@2 F2FS-fs (dm-0): recover_data: ino = e7 (i_size: recover) recovered = 31, err = 0
1560<5>[19700216_13:51:15.744295]@2 F2FS-fs (dm-0): recover_inode: ino = e7, name = system@framework@boot.oat
1561<5>[19700216_13:51:15.744306]@2 F2FS-fs (dm-0): recover_data: ino = e7 (i_size: recover) recovered = 0, err = 0
1562<5>[19700216_13:51:15.744636]@2 F2FS-fs (dm-0): recover_data: ino = e7 (i_size: recover) recovered = 306, err = 0
1563<5>[19700216_13:51:15.744640]@2 F2FS-fs (dm-0): recover_inode: ino = e7, name = system@framework@boot.oat
1564<5>[19700216_13:51:15.744652]@2 F2FS-fs (dm-0): recover_data: ino = e7 (i_size: recover) recovered = 0, err = 0
1565<5>[19700216_13:51:15.744796]@2 F2FS-fs (dm-0): recover_data: ino = e7 (i_size: recover) recovered = 122, err = 0
1566<5>[19700216_13:51:15.744800]@2 F2FS-fs (dm-0): recover_inode: ino = e7, name = system@framework@boot.oat
1567<5>[19700216_13:51:15.744811]@2 F2FS-fs (dm-0): recover_data: ino = e7 (i_size: recover) recovered = 0, err = 0
1568<5>[19700216_13:51:15.744827]@2 F2FS-fs (dm-0): recover_data: ino = e7 (i_size: recover) recovered = 1, err = 0
1569<5>[19700216_13:51:15.744831]@2 F2FS-fs (dm-0): recover_inode: ino = e7, name = system@framework@boot.oat
1570<5>[19700216_13:51:15.744842]@2 F2FS-fs (dm-0): recover_data: ino = e7 (i_size: recover) recovered = 0, err = 0
1571<5>[19700216_13:51:15.744860]@2 F2FS-fs (dm-0): recover_data: ino = e7 (i_size: recover) recovered = 3, err = 0
1572<5>[19700216_13:51:15.744864]@2 F2FS-fs (dm-0): recover_inode: ino = e7, name = system@framework@boot.oat
1573<5>[19700216_13:51:15.744875]@2 F2FS-fs (dm-0): recover_data: ino = e7 (i_size: recover) recovered = 0, err = 0
1574<5>[19700216_13:51:15.744880]@2 F2FS-fs (dm-0): recover_inode: ino = 110, name = .temp.1DUESX
1575<5>[19700216_13:51:15.745044]@2 F2FS-fs (dm-0): recover_dentry: ino = 110, name = .temp.1DUESX, dir = 2e, err = 0
1576<5>[19700216_13:51:15.745058]@2 F2FS-fs (dm-0): recover_data: ino = 110 (i_size: recover) recovered = 0, err = 0
1577<5>[19700216_13:51:15.745096]@2 F2FS-fs (dm-0): recover_inode: ino = 111, name = .temp.Ha7mRM
1578<5>[19700216_13:51:15.745104]@2 F2FS-fs (dm-0): recover_dentry: ino = 111, name = .temp.Ha7mRM, dir = 2e, err = 0
1579<5>[19700216_13:51:15.745115]@2 F2FS-fs (dm-0): recover_data: ino = 111 (i_size: recover) recovered = 0, err = 0
1580<5>[19700216_13:51:15.745126]@2 F2FS-fs (dm-0): recover_inode: ino = c9, name = system@framework@boot.oat
1581<5>[19700216_13:51:15.745138]@2 F2FS-fs (dm-0): recover_data: ino = c9 (i_size: recover) recovered = 0, err = 0
1582<5>[19700216_13:51:15.745361]@2 F2FS-fs (dm-0): recover_data: ino = c9 (i_size: recover) recovered = 46, err = 0
1583<5>[19700216_13:51:15.745374]@2 F2FS-fs (dm-0): recover_inode: ino = 113, name = .temp.NlZLD1
1584<5>[19700216_13:51:15.745381]@2 F2FS-fs (dm-0): recover_dentry: ino = 113, name = .temp.NlZLD1, dir = 2e, err = 0
1585<5>[19700216_13:51:15.745393]@2 F2FS-fs (dm-0): recover_data: ino = 113 (i_size: recover) recovered = 0, err = 0
1586<5>[19700216_13:51:15.745404]@2 F2FS-fs (dm-0): recover_inode: ino = 114, name = .temp.0EEj6w
1587<5>[19700216_13:51:15.745410]@2 F2FS-fs (dm-0): recover_dentry: ino = 114, name = .temp.0EEj6w, dir = 2e, err = 0
1588<5>[19700216_13:51:15.745421]@2 F2FS-fs (dm-0): recover_data: ino = 114 (i_size: recover) recovered = 0, err = 0
1589<5>[19700216_13:51:15.745432]@2 F2FS-fs (dm-0): recover_inode: ino = e7, name = system@framework@boot.oat
1590<5>[19700216_13:51:15.745444]@2 F2FS-fs (dm-0): recover_data: ino = e7 (i_size: recover) recovered = 0, err = 0
1591<5>[19700216_13:51:15.745507]@2 F2FS-fs (dm-0): recover_data: ino = e7 (i_size: recover) recovered = 46, err = 0
1592<5>[19700216_13:51:15.750423]@2 F2FS-fs (dm-0): checkpoint: version = 29
1593<7>[19700216_13:51:15.750702]@2 SELinux: initialized (dev dm-0, type f2fs), uses xattr
1594<6>[19700216_13:51:15.769413]@0 msm_thermal:do_cluster_freq_ctrl Limiting CPU0 max frequency to 2188800. Temp:65
1595<6>[19700216_13:51:15.769425]@0 msm_thermal:do_cluster_freq_ctrl Limiting CPU1 max frequency to 2188800. Temp:65
1596<6>[19700216_13:51:15.769433]@0 msm_thermal:do_cluster_freq_ctrl Limiting CPU2 max frequency to 2342400. Temp:65
1597<6>[19700216_13:51:15.769439]@0 msm_thermal:do_cluster_freq_ctrl Limiting CPU3 max frequency to 2342400. Temp:65
1598<6>[19700216_13:51:16.680010]@0 msm_thermal:do_cluster_freq_ctrl Limiting CPU0 max frequency to 1363200. Temp:81
1599<6>[19700216_13:51:16.688704]@0 msm_thermal:do_cluster_freq_ctrl Limiting CPU1 max frequency to 1363200. Temp:81
1600<6>[19700216_13:51:16.688729]@0 msm_thermal:do_cluster_freq_ctrl Limiting CPU2 max frequency to 1977600. Temp:81
1601<6>[19700216_13:51:16.688750]@0 msm_thermal:do_cluster_freq_ctrl Limiting CPU3 max frequency to 1977600. Temp:81
1602<6>[19700216_13:51:16.739788]@0 msm_thermal:do_cluster_freq_ctrl Limiting CPU0 max frequency to 2188800. Temp:65
1603<6>[19700216_13:51:16.748512]@0 msm_thermal:do_cluster_freq_ctrl Limiting CPU1 max frequency to 2188800. Temp:65
1604<6>[19700216_13:51:16.758129]@0 msm_thermal:do_cluster_freq_ctrl Limiting CPU2 max frequency to 2342400. Temp:65
1605<6>[19700216_13:51:16.767853]@0 msm_thermal:do_cluster_freq_ctrl Limiting CPU3 max frequency to 2342400. Temp:65
1606<3>[19700216_13:51:16.780129]@0 F2FS-fs (dm-0): Unrecognized mount option "noatime" or missing value
1607<3>[19700216_13:51:16.787748]@0 F2FS-fs (dm-0): Unrecognized mount option "noatime" or missing value
1608<7>[19700216_13:51:16.831819]@3 SELinux: initialized (dev dm-0, type f2fs), uses xattr
1609<5>[19700216_13:51:16.832251]@3 audit: type=1400 audit(4024276.819:34): avc: denied { getattr } for pid=443 comm="recovery" path="/data/media" dev="dm-0" ino=4 scontext=u:r:recovery:s0 tcontext=u:object_r:media_rw_data_file:s0 tclass=dir permissive=1
1610<6>[19700216_13:51:16.872350]@0 EXT4-fs (sde20): mounted filesystem with ordered data mode. Opts:
1611<7>[19700216_13:51:16.879801]@0 SELinux: initialized (dev sde20, type ext4), uses xattr
1612<5>[19700216_13:51:16.880481]@3 audit: type=1400 audit(4024276.869:35): avc: denied { read } for pid=443 comm="recovery" name="/" dev="dm-0" ino=3 scontext=u:r:recovery:s0 tcontext=u:object_r:system_data_file:s0 tclass=dir permissive=1
1613<5>[19700216_13:51:16.900407]@3 audit: type=1400 audit(4024276.889:36): avc: denied { open } for pid=443 comm="recovery" path="/data" dev="dm-0" ino=3 scontext=u:r:recovery:s0 tcontext=u:object_r:system_data_file:s0 tclass=dir permissive=1
1614<5>[19700216_13:51:16.900818]@3 audit: type=1400 audit(4024276.889:37): avc: denied { getattr } for pid=443 comm="recovery" path="/data/bootchart" dev="dm-0" ino=6 scontext=u:r:recovery:s0 tcontext=u:object_r:bootchart_data_file:s0 tclass=dir permissive=1
1615<5>[19700216_13:51:16.900838]@3 audit: type=1400 audit(4024276.889:38): avc: denied { read } for pid=443 comm="recovery" name="bootchart" dev="dm-0" ino=6 scontext=u:r:recovery:s0 tcontext=u:object_r:bootchart_data_file:s0 tclass=dir permissive=1
1616<5>[19700216_13:51:16.900849]@3 audit: type=1400 audit(4024276.889:39): avc: denied { open } for pid=443 comm="recovery" path="/data/bootchart" dev="dm-0" ino=6 scontext=u:r:recovery:s0 tcontext=u:object_r:bootchart_data_file:s0 tclass=dir permissive=1
1617<5>[19700216_13:51:16.901359]@3 audit: type=1400 audit(4024276.889:40): avc: denied { getattr } for pid=443 comm="recovery" path="/data/misc/bluedroid" dev="dm-0" ino=8 scontext=u:r:recovery:s0 tcontext=u:object_r:bluetooth_data_file:s0 tclass=dir permissive=1
1618<6>[19700216_13:51:16.913842]@3 SELinux: Context u:object_r:audioserver_data_file:s0 is not valid (left unmapped).
1619<6>[19700216_13:51:16.914393]@3 SELinux: Context u:object_r:boottrace_data_file:s0 is not valid (left unmapped).
1620<6>[19700216_13:51:16.914583]@3 SELinux: Context u:object_r:update_engine_data_file:s0 is not valid (left unmapped).
1621<6>[19700216_13:51:16.914772]@3 SELinux: Context u:object_r:method_trace_data_file:s0 is not valid (left unmapped).
1622<6>[19700216_13:51:16.915131]@3 SELinux: Context u:object_r:user_profile_data_file:s0 is not valid (left unmapped).
1623<6>[19700216_13:51:16.915457]@3 SELinux: Context u:object_r:user_profile_foreign_dex_data_file:s0 is not valid (left unmapped).
1624<6>[19700216_13:51:16.915836]@3 SELinux: Context u:object_r:profman_dump_data_file:s0 is not valid (left unmapped).
1625<6>[19700216_13:51:16.916235]@3 SELinux: Context u:object_r:qfp-daemon_data_file:s0 is not valid (left unmapped).
1626<6>[19700216_13:51:16.916962]@3 SELinux: Context u:object_r:data_qsee_file:s0 is not valid (left unmapped).
1627<6>[19700216_13:51:16.917362]@3 SELinux: Context u:object_r:ipacm_data_file:s0 is not valid (left unmapped).
1628<6>[19700216_13:51:16.917719]@3 SELinux: Context u:object_r:port_bridge_data_file:s0 is not valid (left unmapped).
1629<6>[19700216_13:51:16.920362]@3 SELinux: Context u:object_r:display_misc_file:s0 is not valid (left unmapped).
1630<6>[19700216_13:51:16.920547]@3 SELinux: Context u:object_r:location_data_file:s0 is not valid (left unmapped).
1631<6>[19700216_13:51:16.920900]@3 SELinux: Context u:object_r:location_socket:s0 is not valid (left unmapped).
1632<6>[19700216_13:51:16.921760]@3 SELinux: Context u:object_r:fm_data_file:s0 is not valid (left unmapped).
1633<6>[19700216_13:51:16.921921]@3 SELinux: Context u:object_r:RIDL_data_file:s0 is not valid (left unmapped).
1634<6>[19700216_13:51:16.922684]@3 SELinux: Context u:object_r:RIDL_socket:s0 is not valid (left unmapped).
1635<6>[19700216_13:51:16.922847]@3 SELinux: Context u:object_r:iop_data_file:s0 is not valid (left unmapped).
1636<6>[19700216_13:51:16.923147]@3 SELinux: Context u:object_r:qti_logkit_priv_data_file:s0 is not valid (left unmapped).
1637<6>[19700216_13:51:16.923454]@3 SELinux: Context u:object_r:qti_logkit_pub_data_file:s0 is not valid (left unmapped).
1638<6>[19700216_13:51:16.923615]@3 SELinux: Context u:object_r:qti_logkit_priv_socket:s0 is not valid (left unmapped).
1639<6>[19700216_13:51:16.923778]@3 SELinux: Context u:object_r:qti_logkit_pub_socket:s0 is not valid (left unmapped).
1640<6>[19700216_13:51:16.924095]@3 SELinux: Context u:object_r:dts_data_file:s0 is not valid (left unmapped).
1641<6>[19700216_13:51:16.924253]@3 SELinux: Context u:object_r:seemp_file:s0 is not valid (left unmapped).
1642<6>[19700216_13:51:16.924414]@3 SELinux: Context u:object_r:tlocd_data_file:s0 is not valid (left unmapped).
1643<6>[19700216_13:51:16.924568]@3 SELinux: Context u:object_r:qvop_data_file:s0 is not valid (left unmapped).
1644<6>[19700216_13:51:16.924724]@3 SELinux: Context u:object_r:qvrd_data_file:s0 is not valid (left unmapped).
1645<6>[19700216_13:51:16.924879]@3 SELinux: Context u:object_r:audio_pp_data_file:s0 is not valid (left unmapped).
1646<6>[19700216_13:51:16.925038]@3 SELinux: Context u:object_r:bootstat_data_file:s0 is not valid (left unmapped).
1647<6>[19700216_13:51:16.931111]@3 SELinux: Context u:object_r:ota_data_file:s0 is not valid (left unmapped).
1648<6>[19700216_13:51:16.931277]@3 SELinux: Context u:object_r:ota_package_file:s0 is not valid (left unmapped).
1649<6>[19700216_13:51:16.933651]@3 SELinux: Context u:object_r:mpctl_data_file:s0 is not valid (left unmapped).
1650<6>[19700216_13:51:16.933965]@3 SELinux: Context u:object_r:swap_data_file:s0 is not valid (left unmapped).
1651<6>[19700216_13:51:16.936205]@3 SELinux: Context u:object_r:cache_private_backup_file:s0 is not valid (left unmapped).
1652<6>[19700216_13:51:16.936575]@3 SELinux: Context u:object_r:cnd_data_file:s0 is not valid (left unmapped).
1653<6>[19700216_13:51:16.937042]@3 SELinux: Context u:object_r:dpmd_data_file:s0 is not valid (left unmapped).
1654<6>[19700216_13:51:16.937907]@3 SELinux: Context u:object_r:time_data_file:s0 is not valid (left unmapped).
1655<6>[19700216_13:51:16.938884]@3 SELinux: Context u:object_r:usf_data_file:s0 is not valid (left unmapped).
1656<6>[19700216_13:51:17.802490]@3 mtp_open
1657<6>[19700216_13:51:24.933587]@0 active wakeup source: chg_wake_lock
1658<6>[19700216_13:51:24.938363]@0 active wakeup source: 6a00000.ssusb
1659<3>[19700216_13:52:15.998606]@0 synaptics,s3320: all finger up
1660<4>[19700216_13:52:19.683531]@0 irq 263, desc: ffffffc1757d8000, depth: 0, count: 0, unhandled: 0
1661<4>[19700216_13:52:19.690905]@0 ->handle_irq(): ffffffc000464f40, msm_gpio_irq_handler+0x0/0x204
1662<4>[19700216_13:52:19.699233]@0 ->irq_data.chip(): ffffffc001264890, 0xffffffc001264890
1663<4>[19700216_13:52:19.706698]@0 ->action(): (null)
1664<4>[19700216_13:52:19.711815]@0 IRQ_NOPROBE set
1665<4>[19700216_13:52:19.716071]@0 IRQ_NOREQUEST set
1666<4>[19700216_13:52:19.720320]@0 IRQ_NOTHREAD set
1667<6>[19700216_13:52:25.093447]@1 active wakeup source: chg_wake_lock
1668<6>[19700216_13:52:25.098223]@1 active wakeup source: 6a00000.ssusb
1669<4>[19700216_13:53:17.858155]@0 --------backlight level = 0---------
1670<4>[19700216_13:53:17.867367]@0 blank off start
1671<3>[19700216_13:53:17.867430]@0 fpc1020 soc:fpc_fpc1020: fb_notifier_callback screen off
1672<3>[19700216_13:53:17.867468]@0 synaptics,s3320: fb_notifier_callback blank[4],event[0x10]
1673<3>[19700216_13:53:17.867487]@0 synaptics,s3320: fb_notifier_callback : going TP suspend start
1674<3>[19700216_13:53:17.867512]@0 synaptics,s3320: synaptics_ts_suspend enter
1675<3>[19700216_13:53:17.867550]@0 synaptics,s3320: synaptics_ts_suspend normal end
1676<3>[19700216_13:53:17.867567]@0 synaptics,s3320: fb_notifier_callback : going TP suspend end
1677<4>[19700216_13:53:18.092731]@1 mdss_dsi_off start
1678<4>[19700216_13:53:18.118975]@1 mdss_dsi_off end
1679<3>[19700216_13:53:18.121615]@0 synaptics,s3320: fb_notifier_callback blank[4],event[0x9]
1680<6>[19700216_13:53:18.122916]@0 BQ: bq27541_set_lcd_off_status: off=1
1681<6>[19700216_13:53:18.124078]@0 BQ: bq27541_set_lcd_off_status: lcd_off_delt_soc:0,soc=80,soc_pre=80
1682<4>[19700216_13:53:18.124157]@0 blank off end
1683<6>[19700216_13:53:25.253457]@0 active wakeup source: chg_wake_lock
1684<6>[19700216_13:53:25.258228]@0 active wakeup source: 6a00000.ssusb
1685<4>[19700216_13:53:34.298943]@0 Power-Key DOWN
1686<4>[19700216_13:53:34.399220]@0 Power-Key UP
1687<4>[19700216_13:53:34.402248]@0 blank on start
1688<3>[19700216_13:53:34.404694]@0 fpc1020 soc:fpc_fpc1020: fb_notifier_callback screen on
1689<3>[19700216_13:53:34.404721]@0 synaptics,s3320: fb_notifier_callback blank[0],event[0x10]
1690<3>[19700216_13:53:34.404729]@0 synaptics,s3320: fb_notifier_callback going TP resume start
1691<3>[19700216_13:53:34.404738]@0 synaptics,s3320: synaptics_ts_resume enter!
1692<3>[19700216_13:53:34.404775]@0 synaptics,s3320: synaptics_ts_resume:normal end!
1693<3>[19700216_13:53:34.404782]@0 synaptics,s3320: fb_notifier_callback going TP resume end
1694<4>[19700216_13:53:34.406564]@0 mdss_dsi_on start
1695<3>[19700216_13:53:34.413358]@1 synaptics,s3320: tp_baseline_get start!
1696<4>[19700216_13:53:34.439630]@0 mdss_dsi_on end
1697<3>[19700216_13:53:34.461280]@0 synaptics,s3320: fb_notifier_callback blank[0],event[0x9]
1698<6>[19700216_13:53:34.461549]@0 BQ: bq27541_set_lcd_off_status: off=0
1699<4>[19700216_13:53:34.461553]@0 blank on end
1700<3>[19700216_13:53:34.483838]@0 synaptics,s3320: enter reset tp status,and ts->in_gesture_mode is:0
1701<3>[19700216_13:53:34.483843]@0 synaptics,s3320: synaptics_init_panel is called!
1702<3>[19700216_13:53:34.484093]@0 synaptics,s3320: synaptics_mode_change: set TP to mode[0x80]
1703<3>[19700216_13:53:34.553626]@1 synaptics,s3320: synaptics_tpedge_limitfunc limit_enable =1,mode:0x4b !
1704<3>[19700216_13:53:34.553845]@1 synaptics,s3320: tp_baseline_get end!
1705<3>[19700216_13:53:34.623060]@2 mdss_dsi_post_panel_on:+
1706<3>[19700216_13:53:34.637916]@2 mdss_dsi_post_panel_on:-
1707<4>[19700216_13:53:34.638196]@2 --------backlight level = 149---------
1708<3>[19700216_13:54:24.715665]@0 synaptics,s3320: all finger up
1709<6>[19700216_13:54:25.413447]@1 active wakeup source: chg_wake_lock
1710<6>[19700216_13:54:25.418218]@1 active wakeup source: 6a00000.ssusb
1711<3>[19700216_13:54:47.832557]@3 EXT4-fs (dm-0): Unrecognized mount option "noatime" or missing value
1712<6>[19700216_13:54:47.843043]@0 EXT4-fs (dm-0): mounted filesystem with ordered data mode. Opts: (null)
1713<7>[19700216_13:54:47.850976]@3 SELinux: initialized (dev dm-0, type ext4), uses xattr
1714<4>[19700216_13:54:47.851339]@3 audit_printk_skb: 354 callbacks suppressed
1715<5>[19700216_13:54:47.857317]@3 audit: type=1400 audit(4024487.839:159): avc: denied { write } for pid=461 comm="recovery" name="/" dev="dm-0" ino=2 scontext=u:r:recovery:s0 tcontext=u:object_r:system_data_file:s0 tclass=dir permissive=1
1716<5>[19700216_13:54:47.878084]@3 audit: type=1400 audit(4024487.869:160): avc: denied { remove_name } for pid=461 comm="recovery" name="lost+found" dev="dm-0" ino=11 scontext=u:r:recovery:s0 tcontext=u:object_r:system_data_file:s0 tclass=dir permissive=1
1717<5>[19700216_13:54:47.878096]@3 audit: type=1400 audit(4024487.869:161): avc: denied { rmdir } for pid=461 comm="recovery" name="lost+found" dev="dm-0" ino=11 scontext=u:r:recovery:s0 tcontext=u:object_r:system_data_file:s0 tclass=dir permissive=1
1718<5>[19700216_13:54:47.878807]@3 audit: type=1400 audit(4024487.869:162): avc: denied { add_name } for pid=461 comm="recovery" name="lost+found" scontext=u:r:recovery:s0 tcontext=u:object_r:system_data_file:s0 tclass=dir permissive=1
1719<5>[19700216_13:54:47.878824]@3 audit: type=1400 audit(4024487.869:163): avc: denied { create } for pid=461 comm="recovery" name="lost+found" scontext=u:r:recovery:s0 tcontext=u:object_r:system_data_file:s0 tclass=dir permissive=1
1720<5>[19700216_13:54:47.879575]@3 audit: type=1400 audit(4024487.869:164): avc: denied { relabelfrom } for pid=461 comm="recovery" name="media" dev="dm-0" ino=1537089 scontext=u:r:recovery:s0 tcontext=u:object_r:system_data_file:s0 tclass=dir permissive=1
1721<5>[19700216_13:54:47.879599]@3 audit: type=1400 audit(4024487.869:165): avc: denied { relabelto } for pid=461 comm="recovery" name="media" dev="dm-0" ino=1537089 scontext=u:r:recovery:s0 tcontext=u:object_r:media_rw_data_file:s0 tclass=dir permissive=1
1722<5>[19700216_13:54:47.879628]@3 audit: type=1400 audit(4024487.869:166): avc: denied { setattr } for pid=461 comm="recovery" name="media" dev="dm-0" ino=1537089 scontext=u:r:recovery:s0 tcontext=u:object_r:media_rw_data_file:s0 tclass=dir permissive=1
1723<3>[19700216_13:54:47.918321]@0 EXT4-fs (dm-0): Unrecognized mount option "noatime" or missing value
1724<6>[19700216_13:54:47.934436]@0 EXT4-fs (dm-0): mounted filesystem with ordered data mode. Opts: (null)
1725<7>[19700216_13:54:47.934455]@0 SELinux: initialized (dev dm-0, type ext4), uses xattr
1726<4>[19700216_13:54:47.955462]@1 EXT4-fs (sde20): warning: maximal mount count reached, running e2fsck is recommended
1727<6>[19700216_13:54:47.955668]@1 EXT4-fs (sde20): mounted filesystem with ordered data mode. Opts:
1728<7>[19700216_13:54:47.955685]@1 SELinux: initialized (dev sde20, type ext4), uses xattr
1729<6>[19700216_13:54:50.244499]@0 msm_thermal:do_cluster_freq_ctrl Limiting CPU0 max frequency to 1363200. Temp:80
1730<6>[19700216_13:54:50.253158]@0 msm_thermal:do_cluster_freq_ctrl Limiting CPU1 max frequency to 1363200. Temp:80
1731<6>[19700216_13:54:50.262905]@0 msm_thermal:do_cluster_freq_ctrl Limiting CPU2 max frequency to 1977600. Temp:80
1732<6>[19700216_13:54:50.272469]@0 msm_thermal:do_cluster_freq_ctrl Limiting CPU3 max frequency to 1977600. Temp:80
1733<6>[19700216_13:54:50.333599]@0 msm_thermal:do_cluster_freq_ctrl Limiting CPU0 max frequency to 2188800. Temp:55
1734<6>[19700216_13:54:50.342263]@0 msm_thermal:do_cluster_freq_ctrl Limiting CPU1 max frequency to 2188800. Temp:55
1735<6>[19700216_13:54:50.351898]@0 msm_thermal:do_cluster_freq_ctrl Limiting CPU2 max frequency to 2342400. Temp:55
1736<6>[19700216_13:54:50.351903]@0 msm_thermal:do_cluster_freq_ctrl Limiting CPU3 max frequency to 2342400. Temp:55
1737<6>[19700216_13:54:50.814287]@0 msm_thermal:do_cluster_freq_ctrl Limiting CPU0 max frequency to 1363200. Temp:80
1738<6>[19700216_13:54:50.822976]@0 msm_thermal:do_cluster_freq_ctrl Limiting CPU1 max frequency to 1363200. Temp:80
1739<6>[19700216_13:54:50.822999]@0 msm_thermal:do_cluster_freq_ctrl Limiting CPU2 max frequency to 1977600. Temp:80
1740<6>[19700216_13:54:50.823018]@0 msm_thermal:do_cluster_freq_ctrl Limiting CPU3 max frequency to 1977600. Temp:80
1741<6>[19700216_13:54:50.874292]@0 msm_thermal:do_cluster_freq_ctrl Limiting CPU0 max frequency to 2188800. Temp:64
1742<6>[19700216_13:54:50.882946]@0 msm_thermal:do_cluster_freq_ctrl Limiting CPU1 max frequency to 2188800. Temp:64
1743<6>[19700216_13:54:50.892739]@0 msm_thermal:do_cluster_freq_ctrl Limiting CPU2 max frequency to 2342400. Temp:64
1744<6>[19700216_13:54:50.902417]@0 msm_thermal:do_cluster_freq_ctrl Limiting CPU3 max frequency to 2342400. Temp:64
1745<6>[19700216_13:55:10.554265]@0 msm_thermal:do_cluster_freq_ctrl Limiting CPU0 max frequency to 1363200. Temp:80
1746<6>[19700216_13:55:10.562927]@0 msm_thermal:do_cluster_freq_ctrl Limiting CPU1 max frequency to 1363200. Temp:80
1747<6>[19700216_13:55:10.572692]@0 msm_thermal:do_cluster_freq_ctrl Limiting CPU2 max frequency to 1977600. Temp:80
1748<6>[19700216_13:55:10.572715]@0 msm_thermal:do_cluster_freq_ctrl Limiting CPU3 max frequency to 1977600. Temp:80
1749<6>[19700216_13:55:10.623577]@0 msm_thermal:do_cluster_freq_ctrl Limiting CPU0 max frequency to 2188800. Temp:59
1750<6>[19700216_13:55:10.632203]@0 msm_thermal:do_cluster_freq_ctrl Limiting CPU1 max frequency to 2188800. Temp:59
1751<6>[19700216_13:55:10.641912]@0 msm_thermal:do_cluster_freq_ctrl Limiting CPU2 max frequency to 2342400. Temp:59
1752<6>[19700216_13:55:10.641918]@0 msm_thermal:do_cluster_freq_ctrl Limiting CPU3 max frequency to 2342400. Temp:59
1753<6>[19700216_13:55:15.144656]@0 msm_thermal:do_cluster_freq_ctrl Limiting CPU0 max frequency to 1363200. Temp:80
1754<6>[19700216_13:55:15.153376]@0 msm_thermal:do_cluster_freq_ctrl Limiting CPU1 max frequency to 1363200. Temp:80
1755<6>[19700216_13:55:15.162966]@0 msm_thermal:do_cluster_freq_ctrl Limiting CPU2 max frequency to 1977600. Temp:80
1756<6>[19700216_13:55:15.172747]@0 msm_thermal:do_cluster_freq_ctrl Limiting CPU3 max frequency to 1977600. Temp:80
1757<6>[19700216_13:55:15.233602]@0 msm_thermal:do_cluster_freq_ctrl Limiting CPU0 max frequency to 2188800. Temp:60
1758<6>[19700216_13:55:15.242273]@0 msm_thermal:do_cluster_freq_ctrl Limiting CPU1 max frequency to 2188800. Temp:60
1759<6>[19700216_13:55:15.242278]@0 msm_thermal:do_cluster_freq_ctrl Limiting CPU2 max frequency to 2342400. Temp:60
1760<6>[19700216_13:55:15.242282]@0 msm_thermal:do_cluster_freq_ctrl Limiting CPU3 max frequency to 2342400. Temp:60
1761<6>[19700216_13:55:16.645009]@0 msm_thermal:do_cluster_freq_ctrl Limiting CPU0 max frequency to 1363200. Temp:84
1762<6>[19700216_13:55:16.653825]@0 msm_thermal:do_cluster_freq_ctrl Limiting CPU1 max frequency to 1363200. Temp:84
1763<6>[19700216_13:55:16.653849]@0 msm_thermal:do_cluster_freq_ctrl Limiting CPU2 max frequency to 1977600. Temp:84
1764<6>[19700216_13:55:16.653870]@0 msm_thermal:do_cluster_freq_ctrl Limiting CPU3 max frequency to 1977600. Temp:84
1765<6>[19700216_13:55:16.714299]@0 msm_thermal:do_cluster_freq_ctrl Limiting CPU0 max frequency to 2188800. Temp:59
1766<6>[19700216_13:55:16.722954]@0 msm_thermal:do_cluster_freq_ctrl Limiting CPU1 max frequency to 2188800. Temp:59
1767<6>[19700216_13:55:16.732745]@0 msm_thermal:do_cluster_freq_ctrl Limiting CPU2 max frequency to 2342400. Temp:59
1768<6>[19700216_13:55:16.732766]@0 msm_thermal:do_cluster_freq_ctrl Limiting CPU3 max frequency to 2342400. Temp:59
1769<6>[19700216_13:55:17.134280]@0 msm_thermal:do_cluster_freq_ctrl Limiting CPU0 max frequency to 1363200. Temp:80
1770<6>[19700216_13:55:17.142932]@0 msm_thermal:do_cluster_freq_ctrl Limiting CPU1 max frequency to 1363200. Temp:80
1771<6>[19700216_13:55:17.152634]@0 msm_thermal:do_cluster_freq_ctrl Limiting CPU2 max frequency to 1977600. Temp:80
1772<6>[19700216_13:55:17.162429]@0 msm_thermal:do_cluster_freq_ctrl Limiting CPU3 max frequency to 1977600. Temp:80
1773<6>[19700216_13:55:17.223579]@0 msm_thermal:do_cluster_freq_ctrl Limiting CPU0 max frequency to 2188800. Temp:60
1774<6>[19700216_13:55:17.232271]@0 msm_thermal:do_cluster_freq_ctrl Limiting CPU1 max frequency to 2188800. Temp:60
1775<6>[19700216_13:55:17.241894]@0 msm_thermal:do_cluster_freq_ctrl Limiting CPU2 max frequency to 2342400. Temp:60
1776<6>[19700216_13:55:17.241899]@0 msm_thermal:do_cluster_freq_ctrl Limiting CPU3 max frequency to 2342400. Temp:60
1777<6>[19700216_13:55:17.604297]@0 msm_thermal:do_cluster_freq_ctrl Limiting CPU0 max frequency to 1363200. Temp:82
1778<6>[19700216_13:55:17.612982]@0 msm_thermal:do_cluster_freq_ctrl Limiting CPU1 max frequency to 1363200. Temp:82
1779<6>[19700216_13:55:17.613005]@0 msm_thermal:do_cluster_freq_ctrl Limiting CPU2 max frequency to 1977600. Temp:82
1780<6>[19700216_13:55:17.613025]@0 msm_thermal:do_cluster_freq_ctrl Limiting CPU3 max frequency to 1977600. Temp:82
1781<6>[19700216_13:55:17.664305]@0 msm_thermal:do_cluster_freq_ctrl Limiting CPU0 max frequency to 2188800. Temp:69
1782<6>[19700216_13:55:17.672960]@0 msm_thermal:do_cluster_freq_ctrl Limiting CPU1 max frequency to 2188800. Temp:69
1783<6>[19700216_13:55:17.682736]@0 msm_thermal:do_cluster_freq_ctrl Limiting CPU2 max frequency to 2342400. Temp:69
1784<6>[19700216_13:55:17.692304]@0 msm_thermal:do_cluster_freq_ctrl Limiting CPU3 max frequency to 2342400. Temp:69
1785<6>[19700216_13:55:25.573416]@1 active wakeup source: chg_wake_lock
1786<6>[19700216_13:55:25.578175]@1 active wakeup source: 6a00000.ssusb
1787<6>[19700216_13:55:27.784372]@0 msm_thermal:do_cluster_freq_ctrl Limiting CPU0 max frequency to 1363200. Temp:86
1788<6>[19700216_13:55:27.793108]@0 msm_thermal:do_cluster_freq_ctrl Limiting CPU1 max frequency to 1363200. Temp:86
1789<6>[19700216_13:55:27.793132]@0 msm_thermal:do_cluster_freq_ctrl Limiting CPU2 max frequency to 1977600. Temp:86
1790<6>[19700216_13:55:27.793152]@0 msm_thermal:do_cluster_freq_ctrl Limiting CPU3 max frequency to 1977600. Temp:86
1791<6>[19700216_13:55:28.044510]@0 msm_thermal:do_cluster_freq_ctrl Limiting CPU0 max frequency to 2188800. Temp:67
1792<6>[19700216_13:55:28.053504]@0 msm_thermal:do_cluster_freq_ctrl Limiting CPU1 max frequency to 2188800. Temp:67
1793<6>[19700216_13:55:28.063078]@0 msm_thermal:do_cluster_freq_ctrl Limiting CPU2 max frequency to 2342400. Temp:67
1794<6>[19700216_13:55:28.072724]@0 msm_thermal:do_cluster_freq_ctrl Limiting CPU3 max frequency to 2342400. Temp:67
1795<4>[19700216_13:55:28.099223]@3 EXT4-fs (sde20): warning: maximal mount count reached, running e2fsck is recommended
1796<6>[19700216_13:55:28.108389]@3 EXT4-fs (sde20): mounted filesystem with ordered data mode. Opts:
1797<7>[19700216_13:55:28.116655]@2 SELinux: initialized (dev sde20, type ext4), uses xattr
1798<4>[19700216_13:55:28.127063]@3 EXT4-fs (sde20): warning: maximal mount count reached, running e2fsck is recommended
1799<6>[19700216_13:55:28.136243]@3 EXT4-fs (sde20): mounted filesystem with ordered data mode. Opts:
1800<7>[19700216_13:55:28.144468]@3 SELinux: initialized (dev sde20, type ext4), uses xattr
1801<6>[19700216_13:55:28.146147]@3 recovery[416]: unhandled level 1 translation fault (11) at 0x00000018, esr 0x92000005
1802<1>[19700216_13:55:28.155223]@3 pgd = ffffffc172643000
1803<1>[19700216_13:55:28.159794]@3 [00000018] *pgd=0000000000000000, *pud=0000000000000000
1804<4>[19700216_13:55:28.167258]@3
1805<4>[19700216_13:55:28.169950]@3 CPU: 3 PID: 416 Comm: recovery Tainted: G W 3.18.47-twrp-3.0 #1
1806<4>[19700216_13:55:28.179160]@3 Hardware name: Qualcomm Technologies, Inc. MSM 8996pro + PMI8996 MTP (DT)
1807<4>[19700216_13:55:28.188191]@3 task: ffffffc1729e3700 ti: ffffffc172684000 task.ti: ffffffc172684000
1808<4>[19700216_13:55:28.196869]@3 PC is at 0x7f9ef35eac
1809<4>[19700216_13:55:28.201373]@3 LR is at 0x7f9eeeb2d8
1810<4>[19700216_13:55:28.205897]@3 pc : [<0000007f9ef35eac>] lr : [<0000007f9eeeb2d8>] pstate: 60000000
1811<4>[19700216_13:55:28.214501]@3 sp : 0000007fdb313290
1812<4>[19700216_13:55:28.218995]@3 x29: 0000007fdb3132b0 x28: 000000555562b760
1813<4>[19700216_13:55:28.225504]@3 x27: 000000555562a790 x26: 0000007fdb313368
1814<4>[19700216_13:55:28.232017]@3 x25: 000000555562ac68 x24: 0000000000000000
1815<4>[19700216_13:55:28.238526]@3 x23: 0000000000000001 x22: 0000000000000001
1816<4>[19700216_13:55:28.245037]@3 x21: 0000007f9c649280 x20: 0000000000000000
1817<4>[19700216_13:55:28.251547]@3 x19: 0000000000000018 x18: 0000000000000002
1818<4>[19700216_13:55:28.258056]@3 x17: 0000007f9ef35eac x16: 0000007f9ef8e440
1819<4>[19700216_13:55:28.264578]@3 x15: 6d65747379732f20 x14: 000000555562b000
1820<4>[19700216_13:55:28.271077]@3 x13: 000000555562a000 x12: 000000555562a000
1821<4>[19700216_13:55:28.277588]@3 x11: 0000007fdb313369 x10: 0000000000000000
1822<4>[19700216_13:55:28.284099]@3 x9 : 000000555562b750 x8 : 0000000000000000
1823<4>[19700216_13:55:28.290609]@3 x7 : 61722dff2d2e2d2d x6 : 0000000080000000
1824<4>[19700216_13:55:28.297118]@3 x5 : 0000008000000000 x4 : 2fffffffffffffff
1825<4>[19700216_13:55:28.303630]@3 x3 : 0000000000000000 x2 : 0000000000084000
1826<4>[19700216_13:55:28.310139]@3 x1 : 000000555562b750 x0 : 0000000000000018
1827<4>[19700216_13:55:28.316651]@3
1828<13>[19700216_13:55:28.324370]@0 init: Service 'recovery' (pid 416) killed by signal 11
1829<13>[19700216_13:55:28.330864]@0 init: Service 'recovery' (pid 416) killing any children in process group
1830<13>[19700216_13:55:28.339953]@2 init: Starting service 'recovery'...
1831<11>[19700216_13:55:28.360853]@1 init: property_set("ro.twrp.boot", "1") failed
1832<4>[19700216_13:55:28.362018]@3 --------backlight level = 0---------
1833<4>[19700216_13:55:28.365638]@2 mdss_mdp_overlay_release: Unable to unset pipe(s) ndx=0x8 unset=0x0
1834<11>[19700216_13:55:28.381187]@1 init: property_set("ro.twrp.version", "3.0.4-0") failed
1835<4>[19700216_13:55:28.592845]@1 mdss_dsi_off start
1836<4>[19700216_13:55:28.622500]@1 mdss_dsi_off end
1837<4>[19700216_13:55:28.631774]@0 mdss_dsi_on start
1838<4>[19700216_13:55:28.669599]@0 mdss_dsi_on end
1839<4>[19700216_13:55:28.697387]@0 --------backlight level = 149---------
1840<3>[19700216_13:55:28.757942]@2 mdss_dsi_post_panel_on:+
1841<3>[19700216_13:55:28.773434]@2 mdss_dsi_post_panel_on:-
1842<4>[19700216_13:55:28.782166]@0 blank off start
1843<3>[19700216_13:55:28.782212]@0 fpc1020 soc:fpc_fpc1020: fb_notifier_callback screen off
1844<3>[19700216_13:55:28.782313]@0 synaptics,s3320: fb_notifier_callback blank[4],event[0x10]
1845<3>[19700216_13:55:28.782335]@0 synaptics,s3320: fb_notifier_callback : going TP suspend start
1846<3>[19700216_13:55:28.782356]@0 synaptics,s3320: synaptics_ts_suspend enter
1847<3>[19700216_13:55:28.782391]@0 synaptics,s3320: synaptics_ts_suspend normal end
1848<3>[19700216_13:55:28.782408]@0 synaptics,s3320: fb_notifier_callback : going TP suspend end
1849<4>[19700216_13:55:28.782524]@0 --------backlight level = 0---------
1850<6>[19700216_13:55:28.803616]@1 mtp_release
1851<13>[19700216_13:55:28.804570]@1 init: Untracked pid 454 killed by signal 9
1852<4>[19700216_13:55:29.023451]@0 mdss_dsi_off start
1853<4>[19700216_13:55:29.050556]@0 mdss_dsi_off end
1854<3>[19700216_13:55:29.052605]@0 synaptics,s3320: fb_notifier_callback blank[4],event[0x9]
1855<6>[19700216_13:55:29.054068]@2 BQ: bq27541_set_lcd_off_status: off=1
1856<6>[19700216_13:55:29.055273]@2 BQ: bq27541_set_lcd_off_status: lcd_off_delt_soc:0,soc=80,soc_pre=80
1857<4>[19700216_13:55:29.055352]@2 blank off end
1858<4>[19700216_13:55:29.152973]@2 blank on start
1859<3>[19700216_13:55:29.153699]@2 fpc1020 soc:fpc_fpc1020: fb_notifier_callback screen on
1860<3>[19700216_13:55:29.153721]@2 synaptics,s3320: fb_notifier_callback blank[0],event[0x10]
1861<3>[19700216_13:55:29.153724]@2 synaptics,s3320: fb_notifier_callback going TP resume start
1862<3>[19700216_13:55:29.153727]@2 synaptics,s3320: synaptics_ts_resume enter!
1863<3>[19700216_13:55:29.153743]@2 synaptics,s3320: synaptics_ts_resume:normal end!
1864<3>[19700216_13:55:29.153745]@2 synaptics,s3320: fb_notifier_callback going TP resume end
1865<4>[19700216_13:55:29.155090]@3 mdss_dsi_on start
1866<3>[19700216_13:55:29.163479]@0 synaptics,s3320: tp_baseline_get start!
1867<4>[19700216_13:55:29.187744]@1 mdss_dsi_on end
1868<4>[19700216_13:55:29.209478]@3 --------backlight level = 149---------
1869<3>[19700216_13:55:29.210595]@3 synaptics,s3320: fb_notifier_callback blank[0],event[0x9]
1870<6>[19700216_13:55:29.210827]@3 BQ: bq27541_set_lcd_off_status: off=0
1871<4>[19700216_13:55:29.210830]@3 blank on end
1872<3>[19700216_13:55:29.233692]@1 synaptics,s3320: enter reset tp status,and ts->in_gesture_mode is:0
1873<3>[19700216_13:55:29.233697]@1 synaptics,s3320: synaptics_init_panel is called!
1874<3>[19700216_13:55:29.233963]@1 synaptics,s3320: synaptics_mode_change: set TP to mode[0x80]
1875<3>[19700216_13:55:29.313596]@2 synaptics,s3320: synaptics_tpedge_limitfunc limit_enable =1,mode:0x4b !
1876<3>[19700216_13:55:29.313910]@2 synaptics,s3320: tp_baseline_get end!
1877<3>[19700216_13:55:29.336396]@2 mdss_dsi_post_panel_on:+
1878<3>[19700216_13:55:29.353561]@2 mdss_dsi_post_panel_on:-
1879<5>[19700216_13:55:29.417875]@3 audit: type=1400 audit(4024529.409:167): avc: denied { mounton } for pid=484 comm="mount" path="/sdcard" dev="dm-0" ino=1537089 scontext=u:r:recovery:s0 tcontext=u:object_r:media_rw_data_file:s0 tclass=dir permissive=1
1880<6>[19700216_13:55:29.613567]@0 msm_thermal:do_cluster_freq_ctrl Limiting CPU0 max frequency to 1363200. Temp:80
1881<6>[19700216_13:55:29.622188]@0 msm_thermal:do_cluster_freq_ctrl Limiting CPU1 max frequency to 1363200. Temp:80
1882<6>[19700216_13:55:29.631839]@0 msm_thermal:do_cluster_freq_ctrl Limiting CPU2 max frequency to 1977600. Temp:80
1883<6>[19700216_13:55:29.641503]@0 msm_thermal:do_cluster_freq_ctrl Limiting CPU3 max frequency to 1977600. Temp:80
1884<6>[19700216_13:55:29.844566]@0 msm_thermal:do_cluster_freq_ctrl Limiting CPU0 max frequency to 2188800. Temp:58
1885<6>[19700216_13:55:29.853224]@0 msm_thermal:do_cluster_freq_ctrl Limiting CPU1 max frequency to 2188800. Temp:58
1886<6>[19700216_13:55:29.862920]@0 msm_thermal:do_cluster_freq_ctrl Limiting CPU2 max frequency to 2342400. Temp:58
1887<6>[19700216_13:55:29.872529]@0 msm_thermal:do_cluster_freq_ctrl Limiting CPU3 max frequency to 2342400. Temp:58
1888<6>[19700216_13:55:29.923509]@0 msm_thermal:do_cluster_freq_ctrl Limiting CPU0 max frequency to 1363200. Temp:83
1889<6>[19700216_13:55:29.932131]@0 msm_thermal:do_cluster_freq_ctrl Limiting CPU1 max frequency to 1363200. Temp:83
1890<6>[19700216_13:55:29.941781]@0 msm_thermal:do_cluster_freq_ctrl Limiting CPU2 max frequency to 1977600. Temp:83
1891<6>[19700216_13:55:29.951412]@0 msm_thermal:do_cluster_freq_ctrl Limiting CPU3 max frequency to 1977600. Temp:83
1892<6>[19700216_13:55:30.055335]@0 msm_thermal:do_cluster_freq_ctrl Limiting CPU0 max frequency to 2188800. Temp:61
1893<6>[19700216_13:55:30.064152]@0 msm_thermal:do_cluster_freq_ctrl Limiting CPU1 max frequency to 2188800. Temp:61
1894<6>[19700216_13:55:30.074065]@0 msm_thermal:do_cluster_freq_ctrl Limiting CPU2 max frequency to 2342400. Temp:61
1895<6>[19700216_13:55:30.083421]@0 msm_thermal:do_cluster_freq_ctrl Limiting CPU3 max frequency to 2342400. Temp:61
1896<6>[19700216_13:55:30.898918]@2 mtp_open
1897<6>[19700216_13:56:25.733415]@0 active wakeup source: chg_wake_lock
1898<6>[19700216_13:56:25.738191]@0 active wakeup source: 6a00000.ssusb
1899<4>[19700216_13:56:31.442767]@0 --------backlight level = 0---------
1900<4>[19700216_13:56:31.451597]@0 blank off start
1901<3>[19700216_13:56:31.451660]@0 fpc1020 soc:fpc_fpc1020: fb_notifier_callback screen off
1902<3>[19700216_13:56:31.451695]@0 synaptics,s3320: fb_notifier_callback blank[4],event[0x10]
1903<3>[19700216_13:56:31.451714]@0 synaptics,s3320: fb_notifier_callback : going TP suspend start
1904<3>[19700216_13:56:31.451738]@0 synaptics,s3320: synaptics_ts_suspend enter
1905<3>[19700216_13:56:31.451774]@0 synaptics,s3320: synaptics_ts_suspend normal end
1906<3>[19700216_13:56:31.451790]@0 synaptics,s3320: fb_notifier_callback : going TP suspend end
1907<4>[19700216_13:56:31.684370]@1 mdss_dsi_off start
1908<4>[19700216_13:56:31.710704]@1 mdss_dsi_off end
1909<3>[19700216_13:56:31.712959]@0 synaptics,s3320: fb_notifier_callback blank[4],event[0x9]
1910<6>[19700216_13:56:31.714378]@1 BQ: bq27541_set_lcd_off_status: off=1
1911<6>[19700216_13:56:31.715612]@0 BQ: bq27541_set_lcd_off_status: lcd_off_delt_soc:0,soc=80,soc_pre=80
1912<4>[19700216_13:56:31.715690]@0 blank off end
1913<4>[19700216_13:56:32.906559]@0 Power-Key DOWN
1914<4>[19700216_13:56:33.027939]@0 Power-Key UP
1915<4>[19700216_13:56:33.031033]@0 blank on start
1916<3>[19700216_13:56:33.033481]@0 fpc1020 soc:fpc_fpc1020: fb_notifier_callback screen on
1917<3>[19700216_13:56:33.033504]@0 synaptics,s3320: fb_notifier_callback blank[0],event[0x10]
1918<3>[19700216_13:56:33.033511]@0 synaptics,s3320: fb_notifier_callback going TP resume start
1919<3>[19700216_13:56:33.033519]@0 synaptics,s3320: synaptics_ts_resume enter!
1920<3>[19700216_13:56:33.033552]@0 synaptics,s3320: synaptics_ts_resume:normal end!
1921<3>[19700216_13:56:33.033557]@0 synaptics,s3320: fb_notifier_callback going TP resume end
1922<4>[19700216_13:56:33.034919]@2 mdss_dsi_on start
1923<3>[19700216_13:56:33.043356]@0 synaptics,s3320: tp_baseline_get start!
1924<4>[19700216_13:56:33.071493]@1 mdss_dsi_on end
1925<3>[19700216_13:56:33.093182]@1 synaptics,s3320: fb_notifier_callback blank[0],event[0x9]
1926<6>[19700216_13:56:33.093461]@1 BQ: bq27541_set_lcd_off_status: off=0
1927<4>[19700216_13:56:33.093464]@1 blank on end
1928<3>[19700216_13:56:33.113670]@0 synaptics,s3320: enter reset tp status,and ts->in_gesture_mode is:0
1929<3>[19700216_13:56:33.113675]@0 synaptics,s3320: synaptics_init_panel is called!
1930<3>[19700216_13:56:33.113923]@0 synaptics,s3320: synaptics_mode_change: set TP to mode[0x80]
1931<3>[19700216_13:56:33.194239]@0 synaptics,s3320: synaptics_tpedge_limitfunc limit_enable =1,mode:0x4b !
1932<3>[19700216_13:56:33.194449]@0 synaptics,s3320: tp_baseline_get end!
1933<3>[19700216_13:56:33.248892]@3 mdss_dsi_post_panel_on:+
1934<3>[19700216_13:56:33.269881]@3 mdss_dsi_post_panel_on:-
1935<4>[19700216_13:56:33.270161]@3 --------backlight level = 149---------
1936<6>[19700216_13:57:25.893468]@1 active wakeup source: chg_wake_lock
1937<6>[19700216_13:57:25.898235]@1 active wakeup source: 6a00000.ssusb
1938<4>[19700216_13:57:34.985393]@1 --------backlight level = 0---------
1939<4>[19700216_13:57:34.994427]@1 blank off start
1940<3>[19700216_13:57:34.994486]@1 fpc1020 soc:fpc_fpc1020: fb_notifier_callback screen off
1941<3>[19700216_13:57:34.994587]@1 synaptics,s3320: fb_notifier_callback blank[4],event[0x10]
1942<3>[19700216_13:57:34.994606]@1 synaptics,s3320: fb_notifier_callback : going TP suspend start
1943<3>[19700216_13:57:34.994630]@1 synaptics,s3320: synaptics_ts_suspend enter
1944<3>[19700216_13:57:34.994666]@1 synaptics,s3320: synaptics_ts_suspend normal end
1945<3>[19700216_13:57:34.994682]@1 synaptics,s3320: fb_notifier_callback : going TP suspend end
1946<4>[19700216_13:57:35.217957]@1 mdss_dsi_off start
1947<4>[19700216_13:57:35.244287]@1 mdss_dsi_off end
1948<3>[19700216_13:57:35.246533]@0 synaptics,s3320: fb_notifier_callback blank[4],event[0x9]
1949<6>[19700216_13:57:35.247876]@1 BQ: bq27541_set_lcd_off_status: off=1
1950<6>[19700216_13:57:35.249145]@1 BQ: bq27541_set_lcd_off_status: lcd_off_delt_soc:0,soc=80,soc_pre=80
1951<4>[19700216_13:57:35.249223]@1 blank off end
1952<6>[19700216_13:58:26.053472]@0 active wakeup source: chg_wake_lock
1953<6>[19700216_13:58:26.058240]@0 active wakeup source: 6a00000.ssusb
1954<3>[19700216_13:58:49.835658]@0 BQ: bq27541_battery_soc: bq27541_battery_soc = 81
1955<6>[19700216_13:58:49.844876]@0 BQ: fg_soc_calibrate: soc:81, soc_calib:81, VOLT:4114, current:-350
1956<6>[19700216_13:59:26.213519]@0 active wakeup source: chg_wake_lock
1957<6>[19700216_13:59:26.218289]@0 active wakeup source: 6a00000.ssusb
1958<6>[19700216_14:00:26.373500]@1 active wakeup source: chg_wake_lock
1959<6>[19700216_14:00:26.378276]@1 active wakeup source: 6a00000.ssusb
1960<6>[19700216_14:01:26.533428]@1 active wakeup source: chg_wake_lock
1961<6>[19700216_14:01:26.538201]@1 active wakeup source: 6a00000.ssusb
1962<6>[19700216_14:02:26.693453]@0 active wakeup source: chg_wake_lock
1963<6>[19700216_14:02:26.698226]@0 active wakeup source: 6a00000.ssusb
1964<6>[19700216_14:03:26.853426]@0 active wakeup source: chg_wake_lock
1965<6>[19700216_14:03:26.858198]@0 active wakeup source: 6a00000.ssusb
1966<4>[19700216_14:03:58.515860]@0 Power-Key DOWN
1967<4>[19700216_14:03:58.610204]@0 Power-Key UP
1968<4>[19700216_14:03:58.613009]@0 blank on start
1969<3>[19700216_14:03:58.614026]@0 fpc1020 soc:fpc_fpc1020: fb_notifier_callback screen on
1970<3>[19700216_14:03:58.614053]@0 synaptics,s3320: fb_notifier_callback blank[0],event[0x10]
1971<3>[19700216_14:03:58.614057]@0 synaptics,s3320: fb_notifier_callback going TP resume start
1972<3>[19700216_14:03:58.614061]@0 synaptics,s3320: synaptics_ts_resume enter!
1973<3>[19700216_14:03:58.614080]@0 synaptics,s3320: synaptics_ts_resume:normal end!
1974<3>[19700216_14:03:58.614083]@0 synaptics,s3320: fb_notifier_callback going TP resume end
1975<4>[19700216_14:03:58.615547]@0 mdss_dsi_on start
1976<3>[19700216_14:03:58.623354]@0 synaptics,s3320: tp_baseline_get start!
1977<4>[19700216_14:03:58.655449]@1 mdss_dsi_on end
1978<3>[19700216_14:03:58.677155]@1 synaptics,s3320: fb_notifier_callback blank[0],event[0x9]
1979<6>[19700216_14:03:58.677434]@1 BQ: bq27541_set_lcd_off_status: off=0
1980<4>[19700216_14:03:58.677438]@1 blank on end
1981<3>[19700216_14:03:58.703768]@1 synaptics,s3320: enter reset tp status,and ts->in_gesture_mode is:0
1982<3>[19700216_14:03:58.703773]@1 synaptics,s3320: synaptics_init_panel is called!
1983<3>[19700216_14:03:58.704020]@1 synaptics,s3320: synaptics_mode_change: set TP to mode[0x80]
1984<3>[19700216_14:03:58.773758]@0 synaptics,s3320: synaptics_tpedge_limitfunc limit_enable =1,mode:0x4b !
1985<3>[19700216_14:03:58.773968]@0 synaptics,s3320: tp_baseline_get end!
1986<3>[19700216_14:03:58.798310]@2 BQ: bq27541_battery_soc: bq27541_battery_soc = 82
1987<6>[19700216_14:03:58.815745]@2 BQ: fg_soc_calibrate: soc:82, soc_calib:82, VOLT:4127, current:-351
1988<3>[19700216_14:03:58.863133]@2 mdss_dsi_post_panel_on:+
1989<3>[19700216_14:03:58.887066]@2 mdss_dsi_post_panel_on:-
1990<4>[19700216_14:03:58.887346]@2 --------backlight level = 149---------
1991<3>[19700216_14:03:59.736164]@0 synaptics,s3320: all finger up
1992<3>[19700216_14:04:01.834916]@0 BQ: bq27541_battery_soc: bq27541_battery_soc = 81
1993<3>[19700216_14:04:07.835676]@0 BQ: bq27541_battery_soc: bq27541_battery_soc = 82
1994<6>[19700216_14:04:27.013415]@1 active wakeup source: chg_wake_lock
1995<6>[19700216_14:04:27.018190]@1 active wakeup source: 6a00000.ssusb
1996<4>[19700216_14:04:48.602452]@3 EXT4-fs (sde20): warning: maximal mount count reached, running e2fsck is recommended
1997<6>[19700216_14:04:48.611627]@3 EXT4-fs (sde20): mounted filesystem with ordered data mode. Opts:
1998<7>[19700216_14:04:48.619859]@3 SELinux: initialized (dev sde20, type ext4), uses xattr
1999<4>[19700216_14:04:48.630810]@3 EXT4-fs (sde20): warning: maximal mount count reached, running e2fsck is recommended
2000<6>[19700216_14:04:48.640045]@3 EXT4-fs (sde20): mounted filesystem with ordered data mode. Opts:
2001<7>[19700216_14:04:48.648215]@3 SELinux: initialized (dev sde20, type ext4), uses xattr
2002<6>[19700216_14:04:48.649890]@3 recovery[480]: unhandled level 1 translation fault (11) at 0x00000018, esr 0x92000005
2003<1>[19700216_14:04:48.658954]@3 pgd = ffffffc16f681000
2004<1>[19700216_14:04:48.663548]@3 [00000018] *pgd=0000000000000000, *pud=0000000000000000
2005<4>[19700216_14:04:48.671000]@3
2006<4>[19700216_14:04:48.673704]@3 CPU: 3 PID: 480 Comm: recovery Tainted: G W 3.18.47-twrp-3.0 #1
2007<4>[19700216_14:04:48.682894]@3 Hardware name: Qualcomm Technologies, Inc. MSM 8996pro + PMI8996 MTP (DT)
2008<4>[19700216_14:04:48.691934]@3 task: ffffffc172da6e00 ti: ffffffc1725c4000 task.ti: ffffffc1725c4000
2009<4>[19700216_14:04:48.700610]@3 PC is at 0x7f883e6eac
2010<4>[19700216_14:04:48.705166]@3 LR is at 0x7f8839c2d8
2011<4>[19700216_14:04:48.709630]@3 pc : [<0000007f883e6eac>] lr : [<0000007f8839c2d8>] pstate: 60000000
2012<4>[19700216_14:04:48.718234]@3 sp : 0000007fd7afecc0
2013<4>[19700216_14:04:48.722738]@3 x29: 0000007fd7afece0 x28: 000000555562b760
2014<4>[19700216_14:04:48.729247]@3 x27: 000000555562a790 x26: 0000007fd7afed98
2015<4>[19700216_14:04:48.735757]@3 x25: 000000555562ac68 x24: 0000000000000000
2016<4>[19700216_14:04:48.742268]@3 x23: 0000000000000001 x22: 0000000000000001
2017<4>[19700216_14:04:48.748780]@3 x21: 0000007f85a49280 x20: 0000000000000000
2018<4>[19700216_14:04:48.755291]@3 x19: 0000000000000018 x18: 0000000000000002
2019<4>[19700216_14:04:48.761799]@3 x17: 0000007f883e6eac x16: 0000007f8843f440
2020<4>[19700216_14:04:48.768310]@3 x15: 6d65747379732f20 x14: 000000555562b000
2021<4>[19700216_14:04:48.774821]@3 x13: 000000555562a000 x12: 000000555562a000
2022<4>[19700216_14:04:48.781330]@3 x11: 0000007fd7afed99 x10: 0000000000000000
2023<4>[19700216_14:04:48.787840]@3 x9 : 000000555562b750 x8 : 0000000000000000
2024<4>[19700216_14:04:48.794353]@3 x7 : 61722dff2d2e2d2d x6 : 0000000080000000
2025<4>[19700216_14:04:48.800867]@3 x5 : 0000008000000000 x4 : 2fffffffffffffff
2026<4>[19700216_14:04:48.807377]@3 x3 : 0000000000000000 x2 : 0000000000084000
2027<4>[19700216_14:04:48.813887]@3 x1 : 000000555562b750 x0 : 0000000000000018
2028<4>[19700216_14:04:48.820397]@3
2029<13>[19700216_14:04:48.826428]@1 init: Service 'recovery' (pid 480) killed by signal 11
2030<13>[19700216_14:04:48.832873]@1 init: Service 'recovery' (pid 480) killing any children in process group
2031<13>[19700216_14:04:48.842440]@1 init: Starting service 'recovery'...
2032<11>[19700216_14:04:48.863223]@1 init: property_set("ro.twrp.boot", "1") failed
2033<4>[19700216_14:04:48.864516]@2 --------backlight level = 0---------
2034<4>[19700216_14:04:48.866767]@2 mdss_mdp_overlay_release: Unable to unset pipe(s) ndx=0x8 unset=0x0
2035<11>[19700216_14:04:48.883654]@1 init: property_set("ro.twrp.version", "3.0.4-0") failed
2036<4>[19700216_14:04:49.085838]@0 mdss_dsi_off start
2037<4>[19700216_14:04:49.116207]@0 mdss_dsi_off end
2038<4>[19700216_14:04:49.126250]@0 mdss_dsi_on start
2039<4>[19700216_14:04:49.164119]@1 mdss_dsi_on end
2040<4>[19700216_14:04:49.192417]@1 --------backlight level = 149---------
2041<3>[19700216_14:04:49.244171]@2 mdss_dsi_post_panel_on:+
2042<3>[19700216_14:04:49.265851]@2 mdss_dsi_post_panel_on:-
2043<4>[19700216_14:04:49.275258]@0 blank off start
2044<3>[19700216_14:04:49.275309]@0 fpc1020 soc:fpc_fpc1020: fb_notifier_callback screen off
2045<3>[19700216_14:04:49.275405]@0 synaptics,s3320: fb_notifier_callback blank[4],event[0x10]
2046<3>[19700216_14:04:49.275422]@0 synaptics,s3320: fb_notifier_callback : going TP suspend start
2047<3>[19700216_14:04:49.275440]@0 synaptics,s3320: synaptics_ts_suspend enter
2048<3>[19700216_14:04:49.275472]@0 synaptics,s3320: synaptics_ts_suspend normal end
2049<3>[19700216_14:04:49.275485]@0 synaptics,s3320: fb_notifier_callback : going TP suspend end
2050<4>[19700216_14:04:49.275659]@0 --------backlight level = 0---------
2051<6>[19700216_14:04:49.333606]@1 mtp_release
2052<13>[19700216_14:04:49.334751]@1 init: Untracked pid 485 killed by signal 9
2053<4>[19700216_14:04:49.500983]@0 mdss_dsi_off start
2054<4>[19700216_14:04:49.528180]@0 mdss_dsi_off end
2055<3>[19700216_14:04:49.531578]@0 synaptics,s3320: fb_notifier_callback blank[4],event[0x9]
2056<6>[19700216_14:04:49.532652]@0 BQ: bq27541_set_lcd_off_status: off=1
2057<6>[19700216_14:04:49.533826]@0 BQ: bq27541_set_lcd_off_status: lcd_off_delt_soc:0,soc=82,soc_pre=82
2058<4>[19700216_14:04:49.533902]@0 blank off end
2059<4>[19700216_14:04:49.631547]@2 blank on start
2060<3>[19700216_14:04:49.632801]@2 fpc1020 soc:fpc_fpc1020: fb_notifier_callback screen on
2061<3>[19700216_14:04:49.632826]@2 synaptics,s3320: fb_notifier_callback blank[0],event[0x10]
2062<3>[19700216_14:04:49.632830]@2 synaptics,s3320: fb_notifier_callback going TP resume start
2063<3>[19700216_14:04:49.632833]@2 synaptics,s3320: synaptics_ts_resume enter!
2064<3>[19700216_14:04:49.632850]@2 synaptics,s3320: synaptics_ts_resume:normal end!
2065<3>[19700216_14:04:49.632852]@2 synaptics,s3320: fb_notifier_callback going TP resume end
2066<3>[19700216_14:04:49.633327]@1 synaptics,s3320: tp_baseline_get start!
2067<4>[19700216_14:04:49.634418]@0 mdss_dsi_on start
2068<4>[19700216_14:04:49.667098]@0 mdss_dsi_on end
2069<4>[19700216_14:04:49.688664]@0 --------backlight level = 149---------
2070<3>[19700216_14:04:49.689786]@0 synaptics,s3320: fb_notifier_callback blank[0],event[0x9]
2071<6>[19700216_14:04:49.690021]@0 BQ: bq27541_set_lcd_off_status: off=0
2072<4>[19700216_14:04:49.690024]@0 blank on end
2073<3>[19700216_14:04:49.733685]@0 synaptics,s3320: enter reset tp status,and ts->in_gesture_mode is:0
2074<3>[19700216_14:04:49.733691]@0 synaptics,s3320: synaptics_init_panel is called!
2075<3>[19700216_14:04:49.733940]@0 synaptics,s3320: synaptics_mode_change: set TP to mode[0x80]
2076<3>[19700216_14:04:49.800324]@3 mdss_dsi_post_panel_on:+
2077<3>[19700216_14:04:49.804053]@0 synaptics,s3320: synaptics_tpedge_limitfunc limit_enable =1,mode:0x4b !
2078<3>[19700216_14:04:49.804272]@0 synaptics,s3320: tp_baseline_get end!
2079<3>[19700216_14:04:49.815199]@3 mdss_dsi_post_panel_on:-
2080<6>[19700216_14:04:51.254780]@2 mtp_open
2081<6>[19700216_14:05:27.173461]@1 active wakeup source: chg_wake_lock
2082<6>[19700216_14:05:27.178235]@1 active wakeup source: 6a00000.ssusb
2083<3>[19700216_14:05:29.410726]@0 synaptics,s3320: all finger up
2084<4>[19700216_14:05:29.486864]@1 EXT4-fs (sde20): warning: maximal mount count reached, running e2fsck is recommended
2085<6>[19700216_14:05:29.496710]@1 EXT4-fs (sde20): mounted filesystem with ordered data mode. Opts:
2086<7>[19700216_14:05:29.504482]@1 SELinux: initialized (dev sde20, type ext4), uses xattr
2087<4>[19700216_14:05:29.518891]@3 EXT4-fs (sde20): warning: maximal mount count reached, running e2fsck is recommended
2088<6>[19700216_14:05:29.528077]@3 EXT4-fs (sde20): mounted filesystem with ordered data mode. Opts:
2089<7>[19700216_14:05:29.536296]@3 SELinux: initialized (dev sde20, type ext4), uses xattr
2090<6>[19700216_14:05:29.537999]@3 recovery[508]: unhandled level 1 translation fault (11) at 0x00000018, esr 0x92000005
2091<1>[19700216_14:05:29.547063]@3 pgd = ffffffc0b1efb000
2092<1>[19700216_14:05:29.551645]@3 [00000018] *pgd=0000000000000000, *pud=0000000000000000
2093<4>[19700216_14:05:29.559111]@3
2094<4>[19700216_14:05:29.561804]@3 CPU: 3 PID: 508 Comm: recovery Tainted: G W 3.18.47-twrp-3.0 #1
2095<4>[19700216_14:05:29.571013]@3 Hardware name: Qualcomm Technologies, Inc. MSM 8996pro + PMI8996 MTP (DT)
2096<4>[19700216_14:05:29.580047]@3 task: ffffffc0b4dcee00 ti: ffffffc0b5474000 task.ti: ffffffc0b5474000
2097<4>[19700216_14:05:29.588738]@3 PC is at 0x7f83d97eac
2098<4>[19700216_14:05:29.593227]@3 LR is at 0x7f83d4d2d8
2099<4>[19700216_14:05:29.597773]@3 pc : [<0000007f83d97eac>] lr : [<0000007f83d4d2d8>] pstate: 60000000
2100<4>[19700216_14:05:29.606353]@3 sp : 0000007ff690d1b0
2101<4>[19700216_14:05:29.610847]@3 x29: 0000007ff690d1d0 x28: 000000555562b760
2102<4>[19700216_14:05:29.617357]@3 x27: 000000555562a790 x26: 0000007ff690d288
2103<4>[19700216_14:05:29.623868]@3 x25: 000000555562ac68 x24: 0000000000000000
2104<4>[19700216_14:05:29.630378]@3 x23: 0000000000000001 x22: 0000000000000001
2105<4>[19700216_14:05:29.636890]@3 x21: 0000007f81449280 x20: 0000000000000000
2106<4>[19700216_14:05:29.643429]@3 x19: 0000000000000018 x18: 0000000000000002
2107<4>[19700216_14:05:29.649909]@3 x17: 0000007f83d97eac x16: 0000007f83df0440
2108<4>[19700216_14:05:29.656421]@3 x15: 6d65747379732f20 x14: 000000555562b000
2109<4>[19700216_14:05:29.662931]@3 x13: 000000555562a000 x12: 000000555562a000
2110<4>[19700216_14:05:29.669442]@3 x11: 0000007ff690d289 x10: 0000000000000000
2111<4>[19700216_14:05:29.675956]@3 x9 : 000000555562b750 x8 : 0000000000000000
2112<4>[19700216_14:05:29.682466]@3 x7 : 61722dff2d2e2d2d x6 : 0000000080000000
2113<4>[19700216_14:05:29.688974]@3 x5 : 0000008000000000 x4 : 2fffffffffffffff
2114<4>[19700216_14:05:29.695487]@3 x3 : 0000000000000000 x2 : 0000000000084000
2115<4>[19700216_14:05:29.701994]@3 x1 : 000000555562b750 x0 : 0000000000000018
2116<4>[19700216_14:05:29.708505]@3
2117<13>[19700216_14:05:29.714577]@1 init: Service 'recovery' (pid 508) killed by signal 11
2118<13>[19700216_14:05:29.721018]@1 init: Service 'recovery' (pid 508) killing any children in process group
2119<13>[19700216_14:05:29.730426]@1 init: Starting service 'recovery'...
2120<4>[19700216_14:05:29.746345]@1 --------backlight level = 0---------
2121<11>[19700216_14:05:29.751006]@3 init: property_set("ro.twrp.boot", "1") failed
2122<11>[19700216_14:05:29.751077]@3 init: property_set("ro.twrp.version", "3.0.4-0") failed
2123<4>[19700216_14:05:29.767420]@1 mdss_mdp_overlay_release: Unable to unset pipe(s) ndx=0x8 unset=0x0
2124<4>[19700216_14:05:30.000172]@1 mdss_dsi_off start
2125<4>[19700216_14:05:30.029901]@1 mdss_dsi_off end
2126<4>[19700216_14:05:30.039323]@3 mdss_dsi_on start
2127<4>[19700216_14:05:30.076921]@0 mdss_dsi_on end
2128<4>[19700216_14:05:30.148157]@1 blank off start
2129<3>[19700216_14:05:30.148224]@1 fpc1020 soc:fpc_fpc1020: fb_notifier_callback screen off
2130<3>[19700216_14:05:30.148340]@1 synaptics,s3320: fb_notifier_callback blank[4],event[0x10]
2131<3>[19700216_14:05:30.148361]@1 synaptics,s3320: fb_notifier_callback : going TP suspend start
2132<3>[19700216_14:05:30.148385]@1 synaptics,s3320: synaptics_ts_suspend enter
2133<3>[19700216_14:05:30.148424]@1 synaptics,s3320: synaptics_ts_suspend normal end
2134<3>[19700216_14:05:30.148439]@1 synaptics,s3320: fb_notifier_callback : going TP suspend end
2135<6>[19700216_14:05:30.223547]@0 mtp_release
2136<13>[19700216_14:05:30.224843]@0 init: Untracked pid 513 killed by signal 9
2137<4>[19700216_14:05:30.351989]@1 mdss_dsi_off start
2138<4>[19700216_14:05:30.378370]@1 mdss_dsi_off end
2139<3>[19700216_14:05:30.379267]@1 synaptics,s3320: fb_notifier_callback blank[4],event[0x9]
2140<6>[19700216_14:05:30.381461]@1 BQ: bq27541_set_lcd_off_status: off=1
2141<6>[19700216_14:05:30.382635]@1 BQ: bq27541_set_lcd_off_status: lcd_off_delt_soc:0,soc=82,soc_pre=82
2142<4>[19700216_14:05:30.382715]@1 blank off end
2143<4>[19700216_14:05:30.474529]@2 blank on start
2144<3>[19700216_14:05:30.475213]@2 fpc1020 soc:fpc_fpc1020: fb_notifier_callback screen on
2145<3>[19700216_14:05:30.475234]@2 synaptics,s3320: fb_notifier_callback blank[0],event[0x10]
2146<3>[19700216_14:05:30.475237]@2 synaptics,s3320: fb_notifier_callback going TP resume start
2147<3>[19700216_14:05:30.475240]@2 synaptics,s3320: synaptics_ts_resume enter!
2148<3>[19700216_14:05:30.475258]@2 synaptics,s3320: synaptics_ts_resume:normal end!
2149<3>[19700216_14:05:30.475260]@2 synaptics,s3320: fb_notifier_callback going TP resume end
2150<4>[19700216_14:05:30.476744]@0 mdss_dsi_on start
2151<3>[19700216_14:05:30.483333]@1 synaptics,s3320: tp_baseline_get start!
2152<4>[19700216_14:05:30.509398]@0 mdss_dsi_on end
2153<3>[19700216_14:05:30.531033]@0 synaptics,s3320: fb_notifier_callback blank[0],event[0x9]
2154<6>[19700216_14:05:30.531265]@0 BQ: bq27541_set_lcd_off_status: off=0
2155<4>[19700216_14:05:30.531268]@0 blank on end
2156<3>[19700216_14:05:30.573686]@1 synaptics,s3320: enter reset tp status,and ts->in_gesture_mode is:0
2157<3>[19700216_14:05:30.573691]@1 synaptics,s3320: synaptics_init_panel is called!
2158<3>[19700216_14:05:30.573941]@1 synaptics,s3320: synaptics_mode_change: set TP to mode[0x80]
2159<3>[19700216_14:05:30.633583]@1 synaptics,s3320: synaptics_tpedge_limitfunc limit_enable =1,mode:0x4b !
2160<3>[19700216_14:05:30.641908]@1 synaptics,s3320: tp_baseline_get end!
2161<3>[19700216_14:05:30.642902]@3 mdss_dsi_post_panel_on:+
2162<3>[19700216_14:05:30.657497]@3 mdss_dsi_post_panel_on:-
2163<4>[19700216_14:05:30.702257]@3 --------backlight level = 149---------
2164<6>[19700216_14:05:32.102375]@2 mtp_open
2165<6>[19700216_14:06:27.333417]@1 active wakeup source: chg_wake_lock
2166<6>[19700216_14:06:27.338193]@1 active wakeup source: 6a00000.ssusb
2167<4>[19700216_14:06:38.900569]@0 --------backlight level = 0---------
2168<4>[19700216_14:06:38.909320]@0 blank off start
2169<3>[19700216_14:06:38.909380]@0 fpc1020 soc:fpc_fpc1020: fb_notifier_callback screen off
2170<3>[19700216_14:06:38.909415]@0 synaptics,s3320: fb_notifier_callback blank[4],event[0x10]
2171<3>[19700216_14:06:38.909435]@0 synaptics,s3320: fb_notifier_callback : going TP suspend start
2172<3>[19700216_14:06:38.909459]@0 synaptics,s3320: synaptics_ts_suspend enter
2173<3>[19700216_14:06:38.909496]@0 synaptics,s3320: synaptics_ts_suspend normal end
2174<3>[19700216_14:06:38.909512]@0 synaptics,s3320: fb_notifier_callback : going TP suspend end
2175<4>[19700216_14:06:39.129028]@0 mdss_dsi_off start
2176<4>[19700216_14:06:39.155739]@0 mdss_dsi_off end
2177<3>[19700216_14:06:39.157727]@0 synaptics,s3320: fb_notifier_callback blank[4],event[0x9]
2178<6>[19700216_14:06:39.158939]@1 BQ: bq27541_set_lcd_off_status: off=1
2179<6>[19700216_14:06:39.160121]@1 BQ: bq27541_set_lcd_off_status: lcd_off_delt_soc:0,soc=82,soc_pre=82
2180<4>[19700216_14:06:39.160207]@1 blank off end
2181<6>[19700216_14:07:27.493461]@1 active wakeup source: chg_wake_lock
2182<6>[19700216_14:07:27.498235]@1 active wakeup source: 6a00000.ssusb
2183<6>[19700216_14:08:27.653458]@0 active wakeup source: chg_wake_lock
2184<6>[19700216_14:08:27.658232]@0 active wakeup source: 6a00000.ssusb
2185<6>[19700216_14:09:27.813474]@0 active wakeup source: chg_wake_lock
2186<6>[19700216_14:09:27.818246]@0 active wakeup source: 6a00000.ssusb