· 6 years ago · May 18, 2019, 10:24 AM
1pseudodev@pseudodev:~$ telnet 192.168.2.15 2323
2Trying 192.168.2.15...
3Connected to 192.168.2.15.
4Escape character is '^]'.
5
6Welcome to the Mer/SailfishOS Boat loader debug init system.
7
8Log so far is in /init.log
9
10To make post-switch_root halt before starting systemd, perform:
11 touch /init_enter_debug2
12(When run post-switch_root, telnet is on port 2323, not 23)
13
14sh-3.2# dmesg
15[ 0.000000] Initializing cgroup subsys cpuset
16[ 0.000000] Initializing cgroup subsys cpu
17[ 0.000000] Initializing cgroup subsys cpuacct
18[ 0.000000] Linux version 3.18.119-KronicCore (pseudodev@pseudodev) (gcc version 4.9.x 20150123 (prerelease) (GCC)) #3 SMP PREEMPT Fri May 17 17:14:42 UTC 2019
19[ 0.000000] Boot CPU: AArch64 Processor [511f2112]
20[ 0.000000] Machine: Qualcomm Technologies, Inc. MSM 8996 v3 + PMI8996 MTP
21[ 0.000000] efi: Getting EFI parameters from FDT:
22[ 0.000000] efi: UEFI not found.
23[ 0.000000] Reserved memory: reserved region for node 'removed_regions@85800000': base 0x0000000085800000, size 48 MiB
24[ 0.000000] Reserved memory: reserved region for node 'peripheral_region@8ea00000': base 0x000000008ea00000, size 45 MiB
25[ 0.000000] Reserved memory: reserved region for node 'modem_region@88800000': base 0x0000000088800000, size 98 MiB
26[ 0.000000] Reserved memory: reserved region for node 'dfps_data_mem@83400000': base 0x0000000083400000, size 0 MiB
27[ 0.000000] Reserved memory: reserved region for node 'cont_splash_mem@83401000': base 0x0000000083401000, size 35 MiB
28[ 0.000000] Reserved memory: reserved region for node 'cont_splash_mem_hdmi@b1c00000': base 0x00000000b1c00000, size 35 MiB
29[ 0.000000] Reserved memory: reserved region for node 'ramoops_mem_region': base 0x000000009ff00000, size 1 MiB
30[ 0.000000] Removed memory: created DMA memory pool at 0x0000000085800000, size 48 MiB
31[ 0.000000] Reserved memory: initialized node removed_regions@85800000, compatible id removed-dma-pool
32[ 0.000000] Removed memory: created DMA memory pool at 0x000000008ea00000, size 45 MiB
33[ 0.000000] Reserved memory: initialized node peripheral_region@8ea00000, compatible id removed-dma-pool
34[ 0.000000] Reserved memory: allocated memory for 'adsp_region' node: base 0x00000000ff800000, size 4 MiB
35[ 0.000000] Reserved memory: created CMA memory pool at 0x00000000ff800000, size 4 MiB
36[ 0.000000] Reserved memory: initialized node adsp_region, compatible id shared-dma-pool
37[ 0.000000] Reserved memory: allocated memory for 'qseecom_region' node: base 0x00000000fe400000, size 20 MiB
38[ 0.000000] Reserved memory: created CMA memory pool at 0x00000000fe400000, size 20 MiB
39[ 0.000000] Reserved memory: initialized node qseecom_region, compatible id shared-dma-pool
40[ 0.000000] Reserved memory: allocated memory for 'secure_region' node: base 0x00000000f8800000, size 92 MiB
41[ 0.000000] Reserved memory: created CMA memory pool at 0x00000000f8800000, size 92 MiB
42[ 0.000000] Reserved memory: initialized node secure_region, compatible id shared-dma-pool
43[ 0.000000] Removed memory: created DMA memory pool at 0x0000000088800000, size 98 MiB
44[ 0.000000] Reserved memory: initialized node modem_region@88800000, compatible id removed-dma-pool
45[ 0.000000] cma: Reserved 32 MiB at 0x00000000f6800000
46[ 0.000000] On node 0 totalpages: 731840
47[ 0.000000] DMA zone: 7424 pages used for memmap
48[ 0.000000] DMA zone: 0 pages reserved
49[ 0.000000] DMA zone: 475136 pages, LIFO batch:31
50[ 0.000000] Normal zone: 4011 pages used for memmap
51[ 0.000000] Normal zone: 256704 pages, LIFO batch:31
52[ 0.000000] psci: probing for conduit method from DT.
53[ 0.000000] psci: PSCIv1.0 detected in firmware.
54[ 0.000000] psci: Using standard PSCI v0.2 function IDs
55[ 0.000000] psci: Initializing psci_cpu_init
56[ 0.000000] psci: Initializing psci_cpu_init
57[ 0.000000] psci: Initializing psci_cpu_init
58[ 0.000000] PERCPU: Embedded 15 pages/cpu @ffffffc0be837000 s22272 r8192 d30976 u61440
59[ 0.000000] pcpu-alloc: s22272 r8192 d30976 u61440 alloc=15*4096
60[ 0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3
61[ 0.000000] Detected PIPT I-cache on CPU0
62[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 720405
63[ 0.000000] Kernel command line: sched_enable_hmp=1 sched_enable_power_aware=1 app_setting.use_32bit_app_setting=1 kpti=1 androidboot.hardware=qcom ehci-hcd.park=3 lpm_levels.sleep_disabled=1 cma=32M@0-0xffffffff selinux=0 androidboot.bootdevice=7464900.sdhci androidboot.verifiedbootstate=orange androidboot.veritymode=enforcing androidboot.keymaster=1 battery_soc=94 androidboot.serialno=2978562 androidboot.bootreason=hard_rst androidboot.lock=unlocked androidboot.baseband=msm mdss_mdp.panel=1:dsi:0:qcom,mdss_dsi_tianma_otm1901a_1080p_video:1:none:cfg:single_dsi
64[ 0.000000] log_buf_len individual max cpu contribution: 32768 bytes
65[ 0.000000] log_buf_len total cpu_extra contributions: 98304 bytes
66[ 0.000000] log_buf_len min size: 131072 bytes
67[ 0.000000] log_buf_len: 262144 bytes
68[ 0.000000] early log buf free: 126152(96%)
69[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
70[ 0.000000] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
71[ 0.000000] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
72[ 0.000000] Memory: 2615772K/2927360K available (16165K kernel code, 1867K rwdata, 5148K rodata, 500K init, 2941K bss, 160036K reserved, 151552K cma-reserved)
73[ 0.000000] Virtual kernel memory layout:
74 vmalloc : 0xffffff8000000000 - 0xffffffbdbfff0000 ( 246 GB)
75 vmemmap : 0xffffffbdc0000000 - 0xffffffbfc0000000 ( 8 GB maximum)
76 0xffffffbdc0000000 - 0xffffffbdc2fab000 ( 47 MB actual)
77 PCI I/O : 0xffffffbffa000000 - 0xffffffbffb000000 ( 16 MB)
78 fixed : 0xffffffbffbdfb000 - 0xffffffbffbdff000 ( 16 KB)
79 modules : 0xffffffbffc000000 - 0xffffffc000000000 ( 64 MB)
80 memory : 0xffffffc000000000 - 0xffffffc0beac0000 ( 3050 MB)
81 .init : 0xffffffc00155d000 - 0xffffffc0015da000 ( 500 KB)
82 .text : 0xffffffc000080000 - 0xffffffc00104b7c0 ( 16174 KB)
83 .data : 0xffffffc001601000 - 0xffffffc0017d3e00 ( 1868 KB)
84[ 0.000000] SLUB: HWalign=128, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
85[ 0.000000] HMP scheduling enabled.
86[ 0.000000] Preemptible hierarchical RCU implementation.
87[ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
88[ 0.000000] RCU kthread priority: 1.
89[ 0.000000] NR_IRQS:64 nr_irqs:64 0
90[ 0.000000] CPU0: found redistributor 0 region 0:0x0000000009c00000
91[ 0.000000] mpm_init_irq_domain(): Cannot find irq controller for qcom,gpio-parent
92[ 0.000000] MPM 1 irq mapping errored -517
93[ 0.000000] Offload RCU callbacks from all CPUs
94[ 0.000000] Offload RCU callbacks from CPUs: ffffffc0017fcd10.
95[ 0.000000] Architected cp15 and mmio timer(s) running at 19.20MHz (virt/virt).
96[ 0.000005] sched_clock: 56 bits at 19MHz, resolution 52ns, wraps every 3579139424256ns
97[ 0.000022] Switched to clocksource arch_sys_counter
98[ 0.001012] Console: colour dummy device 80x25
99[ 0.001642] console [tty0] enabled
100[ 0.001660] Calibrating delay loop (skipped), value calculated using timer frequency.. 38.40 BogoMIPS (lpj=19200)
101[ 0.001681] pid_max: default: 32768 minimum: 301
102[ 0.001807] Security Framework initialized
103[ 0.001826] SELinux: Initializing.
104[ 0.001871] SELinux: Starting in permissive mode
105[ 0.001952] Mount-cache hash table entries: 8192 (order: 4, 65536 bytes)
106[ 0.002001] Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes)
107[ 0.002799] Initializing cgroup subsys freezer
108[ 0.003348] /cpus/cpu@0: Unknown CPU type
109[ 0.003372] /cpus/cpu@1: Unknown CPU type
110[ 0.003389] /cpus/cpu@100: Unknown CPU type
111[ 0.003406] /cpus/cpu@101: Unknown CPU type
112[ 0.003423] hw perfevents: enabled with arm/armv8-pmuv3 PMU driver, 9 counters available
113[ 0.003449] EFI services will not be available.
114[ 0.003463] ASID allocator initialised with 32768 entries
115[ 0.003597] NOHZ: local_softirq_pending 02
116[ 0.004053] NOHZ: local_softirq_pending 02
117[ 0.004640] NOHZ: local_softirq_pending 02
118[ 0.005038] NOHZ: local_softirq_pending 02
119[ 0.016002] MSM Memory Dump base table set up
120[ 0.016106] MSM Memory Dump apps data table set up
121[ 0.016126] hyp_assign_table is not functional as qcom_secure_mem is not allocated.
122[ 0.019196] clock-cpu-8996: configuring clocks for the perf cluster
123[ 0.019396] cpu_clock_8996_early_init: finished CPU clock configuration
124[ 0.027447] Detected PIPT I-cache on CPU1
125[ 0.027479] CPU1: found redistributor 1 region 0:0x0000000009c40000
126[ 0.027527] CPU1: Booted secondary processor [511f2112]
127[ 0.035721] Detected PIPT I-cache on CPU2
128[ 0.035788] CPU2: found redistributor 100 region 0:0x0000000009c80000
129[ 0.035888] CPU2: Booted secondary processor [511f2052]
130[ 0.043722] Detected PIPT I-cache on CPU3
131[ 0.043745] CPU3: found redistributor 101 region 0:0x0000000009cc0000
132[ 0.043775] CPU3: Booted secondary processor [511f2052]
133[ 0.043979] Brought up 4 CPUs
134[ 0.044126] SMP: Total of 4 processors activated.
135[ 0.044143] CPU features: detected feature: GIC system register CPU interface
136[ 0.044161] CPU features: kernel page table isolation forced ON by command line option
137[ 0.044214] CPU features: L1_CACHE_BYTES smaller than the Cache Writeback Granule (64 < 128)
138[ 0.044291] alternatives: patching kernel code
139[ 0.053007] devtmpfs: initialized
140[ 0.056724] DMI not present or invalid.
141[ 0.083575] pinctrl core: initialized pinctrl subsystem
142[ 0.084162] regulator-dummy: no parameters
143[ 0.211122] NET: Registered protocol family 16
144[ 0.216136] cpuidle: using governor menu
145[ 0.219139] cpuidle: using governor qcom
146[ 0.220095] vdso: 2 pages (1 code @ ffffffc001051000, 1 data @ ffffffc001608000)
147[ 0.220119] vdso32: 2 pages (1 code @ ffffffc001052000, 1 data @ ffffffc001608000)
148[ 0.223359] software IO TLB [mem 0xffc00000-0x100000000] (4MB) mapped at [ffffffc07fc00000-ffffffc07fffffff]
149[ 0.225089] DMA: preallocated 256 KiB pool for atomic allocations
150[ 0.231832] irq: no irq domain found for /soc/qcom,sde_kms@900000 !
151[ 0.232201] irq: no irq domain found for /soc/qcom,sde_kms@900000 !
152[ 0.232911] irq: no irq domain found for /soc/qcom,sde_kms@900000 !
153[ 0.248118] qcom,msm-apm 99e0000.apm: overriding clock sources across APM switch
154[ 0.249735] sps:sps is ready.
155[ 0.252750] irq: no irq domain found for /soc/pinctrl@01010000 !
156[ 0.254479] cpu-clock-8996 6400000.qcom,cpu-clock-8996: resources init failed
157[ 0.351504] smd_channel_probe_now: allocation table not initialized
158[ 0.351993] smd_channel_probe_now: allocation table not initialized
159[ 0.352510] smd_channel_probe_now: allocation table not initialized
160[ 0.352963] smd_channel_probe_now: allocation table not initialized
161[ 0.353438] msm_watchdog 9830000.qcom,wdt: wdog absent resource not present
162[ 0.353865] msm_watchdog 9830000.qcom,wdt: MSM Watchdog Initialized
163[ 0.354983] msm_rpm_dev_probe: APSS-RPM communication over GLINK
164[ 0.367362] spmi_pmic_arb 400f000.qcom,spmi: PMIC Arb Version-2 0x20010000
165[ 0.370004] spmi_pmic_arb 400f000.qcom,spmi: missing property: qcom,pmic-arb-max-periph-interrupts
166[ 0.377734] pmi8994_s2: 400 <--> 1015 mV at 1000 mV normal idle
167[ 0.378685] platform 9300000.qcom,lpass: assigned reserved memory node peripheral_region@8ea00000
168[ 0.379482] platform ce0000.qcom,venus: assigned reserved memory node peripheral_region@8ea00000
169[ 0.380756] platform 1c00000.qcom,ssc: assigned reserved memory node peripheral_region@8ea00000
170[ 0.381746] platform 2080000.qcom,mss: assigned reserved memory node modem_region@88800000
171[ 0.385817] msm-thermal 70000.qcom,msm-thermal: msm_thermal:Failed reading node=/soc/qcom,msm-thermal, key=qcom,rpm-phase-resource-type err=-22. KTM continues
172[ 0.385864] msm-thermal 70000.qcom,msm-thermal: msm_thermal:Failed reading node=/soc/qcom,msm-thermal, key=qcom,gfx-sensor-id. err=-22. KTM continues
173[ 0.385902] msm-thermal 70000.qcom,msm-thermal: probe_vdd_mx:Failed reading node=/soc/qcom,msm-thermal, key=qcom,mx-restriction-temp. KTM continues
174[ 0.385931] msm-thermal 70000.qcom,msm-thermal: probe_psm:Failed reading node=/soc/qcom,msm-thermal, key=qcom,pmic-sw-mode-temp. err=-22. KTM continues
175[ 0.386125] msm_thermal:vdd_restriction_reg_init Defer regulator vdd-dig probe
176[ 0.386148] msm_thermal:probe_vdd_rstr Err regulator init. err:-517. KTM continues.
177[ 0.386170] msm-thermal 70000.qcom,msm-thermal: probe_vdd_rstr:Failed reading node=/soc/qcom,msm-thermal, key=qcom,max-freq-level. err=-517. KTM continues
178[ 0.386197] msm_thermal:msm_thermal_dev_probe Failed reading node=/soc/qcom,msm-thermal, key=qcom,online-hotplug-core. err:-517
179[ 0.393835] platform soc:qcom,msm-adsprpc-mem: assigned reserved memory node adsp_region
180[ 0.394546] platform soc:qcom,msm-mdsprpc-mem: assigned reserved memory node adsp_region
181[ 0.400740] msm_rpm_trans_notify_state: glink config params: transport=(null), edge=rpm, name=rpm_requests
182[ 0.402088] smd_channel_probe_now: allocation table not initialized
183[ 0.402357] msm_cache_erp64 6500000.qcom,cache_erp64: Registering for L1 error interrupts
184[ 0.402517] msm_cache_erp64 6500000.qcom,cache_erp64: Registering for L2 error interrupts
185[ 0.402797] msm_cache_erp64 6500000.qcom,cache_erp64: Registering for L3 error interrupts
186[ 0.403316] msm_m4m_erp 9a40000.qcom,m4m_erp64: Registering for M4M error interrupts
187[ 0.406612] apc0_pwrcl_mem_acc_corner: 0 <--> 0 mV
188[ 0.407207] apc1_perfcl_mem_acc_corner: 0 <--> 0 mV
189[ 0.407723] apcc_l3_mem_acc_corner: 0 <--> 0 mV
190[ 0.408354] gfx_mem_acc_corner: 0 <--> 0 mV
191[ 0.408990] kryo0-retention: 468 <--> 892 mV at 520 mV
192[ 0.409355] kryo0: 468 <--> 892 mV at 754 mV
193[ 0.409561] kryo_regulator_probe: kryo0: default LDO functional volt=754021 uV, LDO retention volt=521789 uV, Vref func=325285 + 4466*(val), cluster-num=0
194[ 0.410099] kryo1-retention: 468 <--> 892 mV at 520 mV
195[ 0.410423] kryo1: 468 <--> 892 mV at 754 mV
196[ 0.410626] kryo_regulator_probe: kryo1: default LDO functional volt=754021 uV, LDO retention volt=521789 uV, Vref func=325285 + 4466*(val), cluster-num=1
197[ 0.418175] platform soc:qcom,kgsl-hyp: assigned reserved memory node peripheral_region@8ea00000
198[ 0.420404] msm_mpm_dev_probe(): Cannot get clk resource for XO: -517
199[ 0.449607] __of_mpm_init(): MPM driver mapping exists
200[ 0.454615] console [pstore-1] enabled
201[ 0.454976] pstore: Registered ramoops as persistent store backend
202[ 0.455002] ramoops: attached 0x100000@0x9ff00000, ecc: 0/0
203[ 0.457490] cpu-clock-8996 6400000.qcom,cpu-clock-8996: resources init failed
204[ 0.458700] pm8994_s1_corner: 0 <--> 0 mV at 0 mV normal idle
205[ 0.459397] pm8994_s1_floor_corner: 0 <--> 0 mV at 0 mV normal idle
206[ 0.459995] pm8994_s1_corner_ao: 0 <--> 0 mV at 0 mV normal idle
207[ 0.460737] pm8994_s2_corner: 0 <--> 0 mV at 0 mV normal idle
208[ 0.461428] pm8994_s2_corner_ao: 0 <--> 0 mV at 0 mV normal idle
209[ 0.462131] pm8994_s3: 1300 mV normal idle
210[ 0.462786] pm8994_s4: 1800 mV normal idle
211[ 0.463463] pm8994_s5: 2150 mV normal idle
212[ 0.464195] pm8994_s7: 800 mV normal idle
213[ 0.464831] pm8994_l1: 1000 mV normal idle
214[ 0.465584] pm8994_l2: 1250 mV normal idle
215[ 0.466662] pm8994_l3: 1000 mV normal idle
216[ 0.467403] pm8994_l4: 1225 mV normal idle
217[ 0.468065] pm8994_l6: 1200 mV normal idle
218[ 0.468759] pm8994_l8: 1800 mV normal idle
219[ 0.469436] pm8994_l9: 1800 mV normal idle
220[ 0.470171] pm8994_l10: 1800 mV normal idle
221[ 0.470871] pm8994_l11: 1150 mV normal idle
222[ 0.471577] pm8994_l12: 1800 mV normal idle
223[ 0.472682] pm8994_l13: 1800 <--> 2950 mV at 2950 mV normal idle
224[ 0.473402] pm8994_l14: 1800 mV normal idle
225[ 0.474468] pm8994_l15: 1800 mV normal idle
226[ 0.475184] pm8994_l16: 2700 mV normal idle
227[ 0.475858] pm8994_l17: 2800 mV normal idle
228[ 0.476552] pm8994_l18: 2700 <--> 2900 mV at 2700 mV normal idle
229[ 0.477203] pm8994_l18_pin_ctrl: 2700 <--> 2900 mV at 2700 mV normal idle
230[ 0.477858] pm8994_l19: 2850 mV normal idle
231[ 0.478563] pm8994_l20: 2950 mV normal idle
232[ 0.479269] pm8994_l21: 1200 mV normal idle
233[ 0.479929] pm8994_l22: 3300 mV normal idle
234[ 0.480659] pm8994_l23: 2800 mV normal idle
235[ 0.481337] pm8994_l24: 3075 mV normal idle
236[ 0.482008] pm8994_l25: 1200 mV normal idle
237[ 0.483243] pm8994_l26_corner: 0 <--> 0 mV at 0 mV normal idle
238[ 0.483904] pm8994_l26_floor_corner: 0 <--> 0 mV at 0 mV normal idle
239[ 0.484595] pm8994_l27: 1200 mV normal idle
240[ 0.485317] pm8994_l28: 925 mV normal idle
241[ 0.486418] pm8994_l29: 2800 mV normal idle
242[ 0.487154] pm8994_l30: 1800 mV normal idle
243[ 0.487824] pm8994_l32: 1800 mV normal idle
244[ 0.488502] pm8994_lvs1: no parameters
245[ 0.489132] pm8994_lvs2: no parameters
246[ 0.489801] pmi8994_s1: 1025 mV normal idle
247[ 0.490498] pmi8994_boost_5v: no parameters
248[ 0.490713] qcom,rpm-smd-regulator soc:qcom,rpm-smd:rpm-regulator-bstb:regulator-bst: Failed to find supply parent
249[ 0.490851] rpm_vreg_device_probe: regulator_register failed: pmi8994_boost_5v, rc=-517
250[ 0.491374] pmi8994_boost_pin_ctrl: no parameters
251[ 0.491528] qcom,rpm-smd-regulator soc:qcom,rpm-smd:rpm-regulator-bstb:regulator-bst-pin-ctrl: Failed to find supply parent
252[ 0.491660] rpm_vreg_device_probe: regulator_register failed: pmi8994_boost_pin_ctrl, rc=-517
253[ 0.492297] pmi8994_boostbypass: 3150 <--> 3600 mV at 3150 mV normal idle
254[ 0.492816] pm8994_s11: 470 <--> 1140 mV at 905 mV normal idle
255[ 0.493183] pm8994_s11_avs_limit: 470 <--> 1140 mV
256[ 0.493378] spm_regulator_probe: name=pm8994_s11, range=LV, voltage=905000 uV, mode=AUTO, step rate=2400 uV/us
257[ 0.494541] msm-thermal 70000.qcom,msm-thermal: msm_thermal:Failed reading node=/soc/qcom,msm-thermal, key=qcom,rpm-phase-resource-type err=-22. KTM continues
258[ 0.494592] msm-thermal 70000.qcom,msm-thermal: msm_thermal:Failed reading node=/soc/qcom,msm-thermal, key=qcom,gfx-sensor-id. err=-22. KTM continues
259[ 0.494623] msm_thermal:sensor_mgr_init_threshold threshold id already initialized
260[ 0.494650] msm-thermal 70000.qcom,msm-thermal: probe_vdd_mx:Failed reading node=/soc/qcom,msm-thermal, key=qcom,mx-restriction-temp. KTM continues
261[ 0.494683] msm-thermal 70000.qcom,msm-thermal: probe_psm:Failed reading node=/soc/qcom,msm-thermal, key=qcom,pmic-sw-mode-temp. err=-22. KTM continues
262[ 0.495263] msm_thermal:vdd_restriction_reg_init Defer regulator vdd-gfx probe
263[ 0.495296] msm_thermal:probe_vdd_rstr Err regulator init. err:-517. KTM continues.
264[ 0.495322] msm-thermal 70000.qcom,msm-thermal: probe_vdd_rstr:Failed reading node=/soc/qcom,msm-thermal, key=qcom,max-freq-level. err=-517. KTM continues
265[ 0.495353] msm_thermal:msm_thermal_dev_probe Failed reading node=/soc/qcom,msm-thermal, key=qcom,online-hotplug-core. err:-517
266[ 0.496146] msm_mpm_dev_probe(): Cannot get clk resource for XO: -517
267[ 0.496604] cpu-clock-8996 6400000.qcom,cpu-clock-8996: resources init failed
268[ 0.522672] qcom,gcc-8996 300000.qcom,gcc: Registered GCC clocks.
269[ 0.523929] vfe0_clk_src: set OPP pair(75000000 Hz: 3 uV) on a10000.qcom,vfe0
270[ 0.523970] vfe0_clk_src: set OPP pair(320000000 Hz: 5 uV) on a10000.qcom,vfe0
271[ 0.523997] vfe0_clk_src: set OPP pair(600000000 Hz: 7 uV) on a10000.qcom,vfe0
272[ 0.524496] vfe1_clk_src: set OPP pair(75000000 Hz: 3 uV) on a14000.qcom,vfe1
273[ 0.524542] vfe1_clk_src: set OPP pair(320000000 Hz: 5 uV) on a14000.qcom,vfe1
274[ 0.524567] vfe1_clk_src: set OPP pair(600000000 Hz: 7 uV) on a14000.qcom,vfe1
275[ 0.525013] cpp_clk_src: set OPP pair(100000000 Hz: 3 uV) on a04000.qcom,cpp
276[ 0.525084] cpp_clk_src: set OPP pair(480000000 Hz: 5 uV) on a04000.qcom,cpp
277[ 0.525109] cpp_clk_src: set OPP pair(640000000 Hz: 7 uV) on a04000.qcom,cpp
278[ 0.538567] qcom,mmsscc-8996 8c0000.qcom,mmsscc: Registered MMSS clocks.
279[ 0.540779] pmi8994_boost_5v: no parameters
280[ 0.540977] qcom,rpm-smd-regulator soc:qcom,rpm-smd:rpm-regulator-bstb:regulator-bst: Failed to find supply parent
281[ 0.541162] rpm_vreg_device_probe: regulator_register failed: pmi8994_boost_5v, rc=-517
282[ 0.541480] pmi8994_boost_pin_ctrl: no parameters
283[ 0.541608] qcom,rpm-smd-regulator soc:qcom,rpm-smd:rpm-regulator-bstb:regulator-bst-pin-ctrl: Failed to find supply parent
284[ 0.541734] rpm_vreg_device_probe: regulator_register failed: pmi8994_boost_pin_ctrl, rc=-517
285[ 0.542739] msm-thermal 70000.qcom,msm-thermal: msm_thermal:Failed reading node=/soc/qcom,msm-thermal, key=qcom,rpm-phase-resource-type err=-22. KTM continues
286[ 0.542788] msm-thermal 70000.qcom,msm-thermal: msm_thermal:Failed reading node=/soc/qcom,msm-thermal, key=qcom,gfx-sensor-id. err=-22. KTM continues
287[ 0.542818] msm_thermal:sensor_mgr_init_threshold threshold id already initialized
288[ 0.542845] msm-thermal 70000.qcom,msm-thermal: probe_vdd_mx:Failed reading node=/soc/qcom,msm-thermal, key=qcom,mx-restriction-temp. KTM continues
289[ 0.542877] msm-thermal 70000.qcom,msm-thermal: probe_psm:Failed reading node=/soc/qcom,msm-thermal, key=qcom,pmic-sw-mode-temp. err=-22. KTM continues
290[ 0.543261] msm_thermal:vdd_restriction_reg_init Defer regulator vdd-gfx probe
291[ 0.543292] msm_thermal:probe_vdd_rstr Err regulator init. err:-517. KTM continues.
292[ 0.543318] msm-thermal 70000.qcom,msm-thermal: probe_vdd_rstr:Failed reading node=/soc/qcom,msm-thermal, key=qcom,max-freq-level. err=-517. KTM continues
293[ 0.543348] msm_thermal:msm_thermal_dev_probe Failed reading node=/soc/qcom,msm-thermal, key=qcom,online-hotplug-core. err:-517
294[ 0.544292] cpr3_msm8996_hmss_read_fuse_data: apc0_pwrcl_corner: speed bin = 0
295[ 0.544328] cpr3_msm8996_hmss_read_fuse_data: apc0_pwrcl_corner: CPR fusing revision = 6
296[ 0.544352] cpr3_msm8996_hmss_read_fuse_data: apc0_pwrcl_corner: using redundant fuses = N
297[ 0.544374] cpr3_msm8996_hmss_read_fuse_data: apc0_pwrcl_corner: CPR limitation = none
298[ 0.544396] cpr3_msm8996_hmss_read_fuse_data: apc0_pwrcl_corner: CPR partial binning limitation = none
299[ 0.544422] cpr3_msm8996_hmss_read_fuse_data: apc0_pwrcl_corner: Retention voltage fuses: VDD_MX = 4, VDD_APCC = 4
300[ 0.544727] cpr3_hmss_kvreg_init: apc0_pwrcl_corner: LDO min headroom=150000 uV, LDO max headroom=470000 uV, LDO adj=0 uV, LDO mode=allowed, LDO retention=490000 uV
301[ 0.545126] cpr3_msm8996_hmss_calculate_open_loop_voltages: apc0_pwrcl_corner: fused TURBO: open-loop= 940000 uV
302[ 0.545245] cpr3_msm8996_hmss_calculate_target_quotients: apc0_pwrcl_corner: fused MinSVS: quot[ 7]= 337
303[ 0.545269] cpr3_msm8996_hmss_calculate_target_quotients: apc0_pwrcl_corner: fused SVS: quot[ 7]= 541, quot_offset[ 7]= 160
304[ 0.545295] cpr3_msm8996_hmss_calculate_target_quotients: apc0_pwrcl_corner: fused NOM: quot[ 7]= 762, quot_offset[ 7]= 220
305[ 0.545319] cpr3_msm8996_hmss_calculate_target_quotients: apc0_pwrcl_corner: fused TURBO: quot[ 7]=1005, quot_offset[ 7]= 240
306[ 0.545497] cpr3_msm8996_hmss_read_fuse_data: apc0_cbf_corner: speed bin = 0
307[ 0.545585] cpr3_msm8996_hmss_read_fuse_data: apc0_cbf_corner: CPR partial binning limitation = none
308[ 0.545798] cpr3_msm8996_hmss_calculate_open_loop_voltages: apc0_cbf_corner: fused SVS: open-loop= 695000 uV
309[ 0.545911] cpr3_msm8996_hmss_calculate_target_quotients: apc0_cbf_corner: fused MinSVS: quot[ 7]= 337
310[ 0.545959] cpr3_msm8996_hmss_calculate_target_quotients: apc0_cbf_corner: fused NOM: quot[ 7]= 762, quot_offset[ 7]= 220
311[ 0.546253] cpr3_msm8996_hmss_read_fuse_data: apc1_corner: speed bin = 0
312[ 0.546321] cpr3_msm8996_hmss_read_fuse_data: apc1_corner: CPR limitation = none
313[ 0.546796] cpr3_hmss_kvreg_init: apc1_corner: LDO min headroom=150000 uV, LDO max headroom=470000 uV, LDO adj=0 uV, LDO mode=allowed, LDO retention=490000 uV
314[ 0.547191] cpr3_msm8996_hmss_calculate_open_loop_voltages: apc1_corner: fused SVS: open-loop= 665000 uV
315[ 0.547214] cpr3_msm8996_hmss_calculate_open_loop_voltages: apc1_corner: fused NOM: open-loop= 745000 uV
316[ 0.547236] cpr3_msm8996_hmss_calculate_open_loop_voltages: apc1_corner: fused TURBO: open-loop=1010000 uV
317[ 0.547389] cpr3_msm8996_hmss_calculate_target_quotients: apc1_corner: fused MinSVS: quot[ 7]= 317
318[ 0.547413] cpr3_msm8996_hmss_calculate_target_quotients: apc1_corner: fused SVS: quot[ 7]= 475, quot_offset[ 7]= 120
319[ 0.548003] cpr3_regulator_init_ctrl: apcc: Default CPR mode = SW closed-loop
320[ 0.552915] apc1_corner: 0 <--> 0 mV at 0 mV
321[ 0.556362] cpr3_msm8996_mmss_calculate_open_loop_voltages: gfx_corner: fuse_corner[1] open-loop= 675000 uV
322[ 0.556387] cpr3_msm8996_mmss_calculate_open_loop_voltages: gfx_corner: fuse_corner[2] open-loop= 795000 uV
323[ 0.556854] gfx_corner: 0 <--> 0 mV at 0 mV
324[ 0.562964] clock-cpu-8996: set OPP pair (307200000 Hz, 605000 uv) on cpu0
325[ 0.563123] clock-cpu-8996: set OPP pair (307200000 Hz, 605000 uv) on cpu1
326[ 0.563599] clock-cpu-8996: set OPP pair (2150400000 Hz, 995000 uv) on cpu3
327[ 0.563856] clock-cpu-8996: set OPP pair (1593600000 Hz, 915000 uv) on soc:qcom,m4m
328[ 0.564485] qcom,gpucc-8996 8c0000.qcom,gpucc: using speed bin 0
329[ 0.564997] gfx3d_clk_src_v2: set OPP pair(133000000 Hz: 560000 uV) on b00000.qcom,kgsl-3d0
330[ 0.565107] gfx3d_clk_src_v2: set OPP pair(624000000 Hz: 875000 uV) on b00000.qcom,kgsl-3d0
331[ 0.566912] qcom,gpucc-8996 8c0000.qcom,gpucc: Registered GPU clocks.
332[ 0.567311] pmi8994_boost_5v: no parameters
333[ 0.567606] rpm_vreg_device_probe: regulator_register failed: pmi8994_boost_5v, rc=-517
334[ 0.568223] rpm_vreg_device_probe: regulator_register failed: pmi8994_boost_pin_ctrl, rc=-517
335[ 0.569307] msm-thermal 70000.qcom,msm-thermal: msm_thermal:Failed reading node=/soc/qcom,msm-thermal, key=qcom,gfx-sensor-id. err=-22. KTM continues
336[ 0.569338] msm_thermal:sensor_mgr_init_threshold threshold id already initialized
337[ 0.569399] msm-thermal 70000.qcom,msm-thermal: probe_psm:Failed reading node=/soc/qcom,msm-thermal, key=qcom,pmic-sw-mode-temp. err=-22. KTM continues
338[ 0.569828] msm_thermal:update_cpu_freq Unable to update policy for cpu:0. err:-19
339[ 0.571285] msm_thermal:update_cpu_freq Unable to update policy for cpu:0. err:-19
340[ 0.571346] msm_thermal:update_cpu_freq Unable to update policy for cpu:2. err:-19
341[ 0.571706] pmi8994_boost_5v: no parameters
342[ 0.572068] rpm_vreg_device_probe: regulator_register failed: pmi8994_boost_5v, rc=-517
343[ 0.572662] rpm_vreg_device_probe: regulator_register failed: pmi8994_boost_pin_ctrl, rc=-517
344[ 0.623249] KPI: Bootloader load kernel count = 1373
345[ 0.623690] gdsc_mmagic_bimc: no parameters
346[ 0.624737] usb_otg_vreg: no parameters
347[ 0.624966] reg-fixed-voltage soc:usb-otg-switch: Failed to register regulator: -517
348[ 0.630072] usbcore: registered new interface driver usbfs
349[ 0.630864] soc:usb_nop_phy supply vcc not found, using dummy regulator
350[ 0.632615] i2c-msm-v2 75ba000.i2c: error in process device tree node
351[ 0.633148] i2c-msm-v2 757a000.i2c: msm_bus_scale_register_client(mstr-id:86):0 (not a problem)
352[ 0.634796] i2c-msm-v2 75b5000.i2c: probing driver i2c-msm-v2
353[ 0.636285] i2c-msm-v2 75b6000.i2c: probing driver i2c-msm-v2
354[ 0.636412] AXI: msm_bus_scale_register_client(): msm_bus_scale_register_client: Bus driver not ready.
355[ 0.638809] i2c-msm-v2 7575000.i2c: probing driver i2c-msm-v2
356[ 0.640945] i2c-msm-v2 75b7000.i2c: probing driver i2c-msm-v2
357[ 0.641123] AXI: msm_bus_scale_register_client(): msm_bus_scale_register_client: Bus driver not ready.
358[ 0.641150] i2c-msm-v2 75b7000.i2c: msm_bus_scale_register_client(mstr-id:84):0 (not a problem)
359[ 0.641931] media: Linux media interface: v0.10
360[ 0.642016] Linux video capture interface: v2.00
361[ 0.655582] cpufreq: driver msm up and running
362[ 0.656264] platform soc:qcom,ion:qcom,ion-heap@22: assigned reserved memory node adsp_region
363[ 0.656470] platform soc:qcom,ion:qcom,ion-heap@27: assigned reserved memory node qseecom_region
364[ 0.656641] platform soc:qcom,ion:qcom,ion-heap@10: assigned reserved memory node secure_region
365[ 0.657211] ION heap qsecom created at 0x00000000fe400000 with size 1400000
366[ 0.662657] msm-bus-type fab-a0noc: Error: Failed to get regulator bus-a-gdsc:-517
367[ 0.667830] msm-bus-type slv-vmem: Error: Failed to get regulator node-gdsc:-517
368[ 0.674014] msm-bus-type fab-a0noc: Error: Failed to get regulator aggre0-snoc-axi-no-rate:-517
369[ 0.674071] msm-bus-type fab-a0noc: Error: Failed to get regulator aggre0-snoc-axi-no-rate:-517
370[ 0.674260] msm-bus-type fab-mnoc: Error: Failed to get regulator mmagic-mdss-axi-no-rate:-517
371[ 0.674289] msm-bus-type fab-mnoc: Error: Failed to get regulator mmagic-mdss-axi-no-rate:-517
372[ 0.674374] msm-bus-type fab-mnoc: Error: Failed to get regulator mmagic-mdss-axi-no-rate:-517
373[ 0.674402] msm-bus-type fab-mnoc: Error: Failed to get regulator mmagic-mdss-axi-no-rate:-517
374[ 0.676879] qcom,qpnp-power-on qpnp-power-on-2: PMIC@SID0 Power-on reason: Triggered from Hard Reset and 'cold' boot
375[ 0.676911] qcom,qpnp-power-on qpnp-power-on-2: PMIC@SID0: Power-off reason: Triggered from KPDPWR_N (Long Power Key hold)
376[ 0.677152] input: qpnp_pon as /devices/virtual/input/input0
377[ 0.678074] qcom,qpnp-power-on qpnp-power-on-11: PMIC@SID2 Power-on reason: Triggered from USB (USB charger insertion) and 'cold' boot
378[ 0.679994] ipa ipa2_uc_state_check:296 uC interface not initialized
379[ 0.682581] sps:BAM 0x0000000000684000 is registered.
380[ 0.709714] ipa ipa2_uc_state_check:296 uC interface not initialized
381[ 0.714208] gdsc_mmagic_video: no parameters
382[ 0.715097] gdsc_venus: supplied by gdsc_mmagic_video
383[ 0.716108] gdsc_vfe0: no parameters
384[ 0.716372] gdsc_vfe1: supplied by gdsc_camss_top
385[ 0.716630] gdsc_mdss: no parameters
386[ 0.717408] gdsc_cpp: supplied by gdsc_camss_top
387[ 0.718723] gdsc_fd: supplied by gdsc_camss_top
388[ 0.720162] gdsc_hlos1_vote_lpass_adsp: no parameters
389[ 0.723387] mdss_pll_util_parse_dt_supply: : error reading ulp load. rc=-22
390[ 0.726065] mdss_pll_util_parse_dt_supply: : error reading ulp load. rc=-22
391[ 0.727917] mdss_pll_probe: MDSS pll label = MDSS HDMI PLL
392[ 0.727960] mdss_pll_util_parse_dt_supply: : error reading ulp load. rc=-22
393[ 0.760234] arm-smmu 1660000.arm,smmu-anoc1: found 4 context interrupt(s) but have 3 context banks. assuming 3 context interrupts.
394[ 0.765170] Bluetooth: ffffffc0bad03ce8
395[ 0.765319] Bluetooth: ffffffc0bad03ca8
396[ 0.766081] cfg80211: DFS Master region: unset
397[ 0.766111] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
398[ 0.766148] cfg80211: (5170000 KHz - 5250000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A)
399[ 0.779608] 608000.qcom,pcie supply vreg-3.3 not found, using dummy regulator
400[ 0.782654] msm_pcie_get_resources: PCIe: RC1 can't get tcsr resource.
401[ 1.226431] qcrypto 660000.qcrypto: CE device = 0x0
402 IO base, CE = 0xffffff8004440000
403 Consumer (IN) PIPE 4, Producer (OUT) PIPE 5
404 IO base BAM = 0x0000000000000000
405 BAM IRQ 249
406 Engines Availability = 0x2011053
407[ 1.226932] QCE50: qce_sps_init: Qualcomm MSM CE-BAM at 0x0000000000644000 irq 249
408[ 1.230831] qcrypto 660000.qcrypto: qcrypto-ecb-des
409[ 1.231439] qcrypto 660000.qcrypto: qcrypto-xts-aes
410[ 1.231723] qcrypto 660000.qcrypto: qcrypto-sha256
411[ 1.232813] qcrypto 660000.qcrypto: qcrypto-hmac-sha256
412[ 1.236877] ICE IRQ = 32
413[ 1.238399] SCSI Media Changer driver v0.25
414[ 1.240849] Ethernet Channel Bonding Driver: v3.7.1 (April 27, 2011)
415[ 1.242341] tun: Universal TUN/TAP device driver, 1.6
416[ 1.242558] PPP generic driver version 2.4.2
417[ 1.246770] usbcore: registered new interface driver ax88179_178a
418[ 1.247884] msm_sharedmem: sharedmem_register_qmi: qmi init successful
419[ 1.262446] msm-dwc3 6a00000.ssusb: unable to get dbm device
420[ 1.266979] usbcore: registered new interface driver usbserial
421[ 1.268578] usbcore: registered new interface driver xpad
422[ 1.354680] i2c-msm-v2 75b6000.i2c: msm_bus_scale_register_client(mstr-id:84):0x12 (ok)
423[ 1.356553] <<-GTP-INFO->> Config group0 used,length: 186
424[ 1.357000] <<-GTP-INFO->> Driver send config.
425[ 1.357479] sps: BAM device 0x0000000007584000 is not registered yet.
426[ 1.358006] sps:BAM 0x0000000007584000 is registered.
427[ 1.358505] sps:BAM 0x0000000007584000 (va:0xffffff80065c0000) enabled: ver:0x19, number of pipes:24
428[ 1.364753] <<-GTP-INFO->> X_MAX: 1080, Y_MAX: 1920, TRIGGER: 0x01
429[ 1.375668] input: goodix-ts as /devices/virtual/input/input1
430[ 1.377530] <<-GTP-INFO->> FILE PID:915L
431[ 1.377605] <<-GTP-ERROR->> File VID <= Ic VID, update aborted!
432[ 1.419310] vmem: Up and running with 4 banks of memory from [io size 0x3f462f0949 64bit pref window disabled]
433[ 1.441105] msm_eeprom_platform_probe failed 1641
434[ 1.458986] CAM-SOC msm_camera_get_res_size:771 err: mem resource vfe_fuse not found
435[ 1.472819] __msm_jpeg_init:1537] Jpeg Device id 2
436[ 1.473747] __msm_jpeg_init:1537] Jpeg Device id 3
437[ 1.479509] msm_fd_hw_set_dt_parms_by_name: Error property does not exist
438[ 1.579109] msm_fd aa4000.qcom,fd: Face detection halt timeout
439[ 1.580758] SMB1351 smb1351_parallel_slave_probe: smb1351 parallel successfully probed.
440[ 1.581278] FG: fg_check_ima_exception: Initial ima_err_sts=0 ima_exp_sts=0 ima_hw_sts=cc
441[ 1.585890] unable to find DT imem DLOAD mode node
442[ 1.626674] bt_power bt_qca6174: no qca,bt-vdd-core-voltage-level property
443[ 1.626908] bt_dt_parse_vreg_info: qca,bt-chip-pwd: is not provided in device tree
444[ 1.630353] qcom_ice_get_pdevice: found ice device ffffffc0b910e800
445[ 1.636400] sdhci_msm 7464900.sdhci: No vmmc regulator found
446[ 1.637222] mmc0: SDHCI controller on 7464900.sdhci [7464900.sdhci] using 64-bit ADMA in CMDQ mode
447[ 1.683754] sdhci_msm 74a4900.sdhci: No vmmc regulator found
448[ 1.684498] mmc1: SDHCI controller on 74a4900.sdhci [74a4900.sdhci] using 64-bit ADMA in legacy mode
449[ 1.684869] sdhci_msm_vreg_set_voltage: regulator_set_voltage(vdd)failed. min_uV=2950000,max_uV=2950000,ret=-22
450[ 1.709014] mmc0: Out-of-interrupt timeout is 100[ms]
451[ 1.709061] mmc0: BKOPS_EN equals 0x2
452[ 1.709073] mmc0: eMMC FW version: 0x32
453[ 1.709084] mmc0: CMDQ supported: depth: 32
454[ 1.709094] mmc0: cache barrier support 1 flush policy 1
455[ 1.716335] hidraw: raw HID events driver (C) Jiri Kosina
456[ 1.721877] ashmem: initialized
457[ 1.724556] sdhci_msm_pm_qos_cpu_init (): voted for group #1 (mask=0xc) latency=70
458[ 1.730591] mmcblk0: p1 p2 p3 p4 p5 p6 p7 p8 p9 p10 p11 p12 p13 p14 p15 p16 p17 p18 p19 p20 p21 p22 p23 p24 p25 p26 p27 p28 p29 p30 p31 p32 p33 p34 p35 p36 p37 p38 p39 p40 p41 p42 p43 p44 p45 p46 p47 p48
459[ 1.911225] msm_11ad: probe of soc:qcom,wil6210 failed with error -1
460[ 1.918919] m4m-hwmon 6530000.qcom,m4m-hwmon: Cache HWmon governor registered.
461[ 1.925400] devfreq soc:qcom,m4m: Couldn't update frequency transition information.
462[ 1.928100] sensors-ssc soc:qcom,msm-ssc-sensors: slpi_loader_init_sysfs: Could not parse dt
463[ 1.929796] ZUK-FPC: fpc1020_hw_reset: HW reset
464[ 1.932726] usbcore: registered new interface driver snd-usb-audio
465[ 1.947206] msm-dai-tdm soc:qcom,msm-dai-tdm-sec-tx: msm_dai_tdm_q6_probe: dev_name: soc:qcom,msm-dai-tdm-sec-tx group_id: 0x9111
466[ 1.947521] msm-dai-q6-tdm soc:qcom,msm-dai-tdm-sec-tx:qcom,msm-dai-q6-tdm-sec-tx-0: msm_dai_q6_tdm_dev_probe: dev_name: soc:qcom,msm-dai-tdm-sec-tx:qcom,msm-dai-q6-tdm-sec-tx-0 dev_id: 0x9011
467[ 1.947541] msm-dai-q6-tdm soc:qcom,msm-dai-tdm-sec-tx:qcom,msm-dai-q6-tdm-sec-tx-0: msm_dai_q6_tdm_dev_probe: Custom tdm header not supported
468[ 1.947732] msm-dai-q6-tdm soc:qcom,msm-dai-tdm-sec-tx:qcom,msm-dai-q6-tdm-sec-tx-1: msm_dai_q6_tdm_dev_probe: dev_name: soc:qcom,msm-dai-tdm-sec-tx:qcom,msm-dai-q6-tdm-sec-tx-1 dev_id: 0x9013
469[ 1.947943] msm-dai-q6-tdm soc:qcom,msm-dai-tdm-sec-tx:qcom,msm-dai-q6-tdm-sec-tx-2: msm_dai_q6_tdm_dev_probe: dev_name: soc:qcom,msm-dai-tdm-sec-tx:qcom,msm-dai-q6-tdm-sec-tx-2 dev_id: 0x9015
470[ 1.948183] msm-dai-q6-tdm soc:qcom,msm-dai-tdm-sec-tx:qcom,msm-dai-q6-tdm-sec-tx-3: msm_dai_q6_tdm_dev_probe: dev_name: soc:qcom,msm-dai-tdm-sec-tx:qcom,msm-dai-q6-tdm-sec-tx-3 dev_id: 0x9017
471[ 1.948236] msm-dai-tdm soc:qcom,msm-dai-tdm-tert-rx: msm_dai_tdm_q6_probe: dev_name: soc:qcom,msm-dai-tdm-tert-rx group_id: 0x9120
472[ 1.948440] msm-dai-q6-tdm soc:qcom,msm-dai-tdm-tert-rx:qcom,msm-dai-q6-tdm-tert-rx-0: msm_dai_q6_tdm_dev_probe: Custom tdm header not supported
473[ 1.948619] msm-dai-q6-tdm soc:qcom,msm-dai-tdm-tert-rx:qcom,msm-dai-q6-tdm-tert-rx-1: msm_dai_q6_tdm_dev_probe: dev_name: soc:qcom,msm-dai-tdm-tert-rx:qcom,msm-dai-q6-tdm-tert-rx-1 dev_id: 0x9022
474[ 1.948638] msm-dai-q6-tdm soc:qcom,msm-dai-tdm-tert-rx:qcom,msm-dai-q6-tdm-tert-rx-1: msm_dai_q6_tdm_dev_probe: Custom tdm header not supported
475[ 1.948829] msm-dai-q6-tdm soc:qcom,msm-dai-tdm-tert-rx:qcom,msm-dai-q6-tdm-tert-rx-2: msm_dai_q6_tdm_dev_probe: dev_name: soc:qcom,msm-dai-tdm-tert-rx:qcom,msm-dai-q6-tdm-tert-rx-2 dev_id: 0x9024
476[ 1.948848] msm-dai-q6-tdm soc:qcom,msm-dai-tdm-tert-rx:qcom,msm-dai-q6-tdm-tert-rx-2: msm_dai_q6_tdm_dev_probe: Custom tdm header not supported
477[ 1.949070] msm-dai-q6-tdm soc:qcom,msm-dai-tdm-tert-rx:qcom,msm-dai-q6-tdm-tert-rx-3: msm_dai_q6_tdm_dev_probe: dev_name: soc:qcom,msm-dai-tdm-tert-rx:qcom,msm-dai-q6-tdm-tert-rx-3 dev_id: 0x9026
478[ 1.949088] msm-dai-q6-tdm soc:qcom,msm-dai-tdm-tert-rx:qcom,msm-dai-q6-tdm-tert-rx-3: msm_dai_q6_tdm_dev_probe: Custom tdm header not supported
479[ 1.949121] msm-dai-tdm soc:qcom,msm-dai-tdm-tert-tx: msm_dai_tdm_q6_probe: dev_name: soc:qcom,msm-dai-tdm-tert-tx group_id: 0x9121
480[ 1.949304] msm-dai-q6-tdm soc:qcom,msm-dai-tdm-tert-tx:qcom,msm-dai-q6-tdm-tert-tx-0: msm_dai_q6_tdm_dev_probe: dev_name: soc:qcom,msm-dai-tdm-tert-tx:qcom,msm-dai-q6-tdm-tert-tx-0 dev_id: 0x9021
481[ 1.949322] msm-dai-q6-tdm soc:qcom,msm-dai-tdm-tert-tx:qcom,msm-dai-q6-tdm-tert-tx-0: msm_dai_q6_tdm_dev_probe: Custom tdm header not supported
482[ 1.949551] msm-dai-q6-tdm soc:qcom,msm-dai-tdm-tert-tx:qcom,msm-dai-q6-tdm-tert-tx-1: msm_dai_q6_tdm_dev_probe: Custom tdm header not supported
483[ 1.949739] msm-dai-q6-tdm soc:qcom,msm-dai-tdm-tert-tx:qcom,msm-dai-q6-tdm-tert-tx-2: msm_dai_q6_tdm_dev_probe: dev_name: soc:qcom,msm-dai-tdm-tert-tx:qcom,msm-dai-q6-tdm-tert-tx-2 dev_id: 0x9025
484[ 1.949758] msm-dai-q6-tdm soc:qcom,msm-dai-tdm-tert-tx:qcom,msm-dai-q6-tdm-tert-tx-2: msm_dai_q6_tdm_dev_probe: Custom tdm header not supported
485[ 1.949949] msm-dai-q6-tdm soc:qcom,msm-dai-tdm-tert-tx:qcom,msm-dai-q6-tdm-tert-tx-3: msm_dai_q6_tdm_dev_probe: dev_name: soc:qcom,msm-dai-tdm-tert-tx:qcom,msm-dai-q6-tdm-tert-tx-3 dev_id: 0x9027
486[ 1.949968] msm-dai-q6-tdm soc:qcom,msm-dai-tdm-tert-tx:qcom,msm-dai-q6-tdm-tert-tx-3: msm_dai_q6_tdm_dev_probe: Custom tdm header not supported
487[ 1.950001] msm-dai-tdm soc:qcom,msm-dai-tdm-quat-rx: msm_dai_tdm_q6_probe: dev_name: soc:qcom,msm-dai-tdm-quat-rx group_id: 0x9130
488[ 1.950213] msm-dai-q6-tdm soc:qcom,msm-dai-tdm-quat-rx:qcom,msm-dai-q6-tdm-quat-rx-0: msm_dai_q6_tdm_dev_probe: dev_name: soc:qcom,msm-dai-tdm-quat-rx:qcom,msm-dai-q6-tdm-quat-rx-0 dev_id: 0x9030
489[ 1.950232] msm-dai-q6-tdm soc:qcom,msm-dai-tdm-quat-rx:qcom,msm-dai-q6-tdm-quat-rx-0: msm_dai_q6_tdm_dev_probe: Custom tdm header not supported
490[ 1.950420] msm-dai-q6-tdm soc:qcom,msm-dai-tdm-quat-rx:qcom,msm-dai-q6-tdm-quat-rx-1: msm_dai_q6_tdm_dev_probe: dev_name: soc:qcom,msm-dai-tdm-quat-rx:qcom,msm-dai-q6-tdm-quat-rx-1 dev_id: 0x9032
491[ 1.950438] msm-dai-q6-tdm soc:qcom,msm-dai-tdm-quat-rx:qcom,msm-dai-q6-tdm-quat-rx-1: msm_dai_q6_tdm_dev_probe: Custom tdm header not supported
492[ 1.950623] msm-dai-q6-tdm soc:qcom,msm-dai-tdm-quat-rx:qcom,msm-dai-q6-tdm-quat-rx-2: msm_dai_q6_tdm_dev_probe: dev_name: soc:qcom,msm-dai-tdm-quat-rx:qcom,msm-dai-q6-tdm-quat-rx-2 dev_id: 0x9034
493[ 1.950824] msm-dai-q6-tdm soc:qcom,msm-dai-tdm-quat-rx:qcom,msm-dai-q6-tdm-quat-rx-3: msm_dai_q6_tdm_dev_probe: dev_name: soc:qcom,msm-dai-tdm-quat-rx:qcom,msm-dai-q6-tdm-quat-rx-3 dev_id: 0x9036
494[ 1.950842] msm-dai-q6-tdm soc:qcom,msm-dai-tdm-quat-rx:qcom,msm-dai-q6-tdm-quat-rx-3: msm_dai_q6_tdm_dev_probe: Custom tdm header not supported
495[ 1.950877] msm-dai-tdm soc:qcom,msm-dai-tdm-quat-tx: msm_dai_tdm_q6_probe: dev_name: soc:qcom,msm-dai-tdm-quat-tx group_id: 0x9131
496[ 1.951086] msm-dai-q6-tdm soc:qcom,msm-dai-tdm-quat-tx:qcom,msm-dai-q6-tdm-quat-tx-0: msm_dai_q6_tdm_dev_probe: dev_name: soc:qcom,msm-dai-tdm-quat-tx:qcom,msm-dai-q6-tdm-quat-tx-0 dev_id: 0x9031
497[ 1.951305] msm-dai-q6-tdm soc:qcom,msm-dai-tdm-quat-tx:qcom,msm-dai-q6-tdm-quat-tx-1: msm_dai_q6_tdm_dev_probe: dev_name: soc:qcom,msm-dai-tdm-quat-tx:qcom,msm-dai-q6-tdm-quat-tx-1 dev_id: 0x9033
498[ 1.951506] msm-dai-q6-tdm soc:qcom,msm-dai-tdm-quat-tx:qcom,msm-dai-q6-tdm-quat-tx-2: msm_dai_q6_tdm_dev_probe: dev_name: soc:qcom,msm-dai-tdm-quat-tx:qcom,msm-dai-q6-tdm-quat-tx-2 dev_id: 0x9035
499[ 1.951524] msm-dai-q6-tdm soc:qcom,msm-dai-tdm-quat-tx:qcom,msm-dai-q6-tdm-quat-tx-2: msm_dai_q6_tdm_dev_probe: Custom tdm header not supported
500[ 1.951710] msm-dai-q6-tdm soc:qcom,msm-dai-tdm-quat-tx:qcom,msm-dai-q6-tdm-quat-tx-3: msm_dai_q6_tdm_dev_probe: dev_name: soc:qcom,msm-dai-tdm-quat-tx:qcom,msm-dai-q6-tdm-quat-tx-3 dev_id: 0x9037
501[ 1.969364] GACT probability NOT on
502[ 1.969386] Mirror/redirect action on
503[ 1.969413] Netfilter messages via NETLINK v0.30.
504[ 1.970480] xt_time: kernel timezone is -0000
505[ 1.970658] ip_tables: (C) 2000-2006 Netfilter Core Team
506[ 1.970757] TCP: westwood registered
507[ 1.972203] sit: IPv6 over IPv4 tunneling driver
508[ 1.972522] NET: Registered protocol family 17
509[ 1.972559] NET: Registered protocol family 15
510[ 1.972644] bridge: automatic filtering via arp/ip/ip6tables has been deprecated. Update your scripts to load br_netfilter if you need this.
511[ 1.972657] Ebtables v2.0 registered
512[ 1.972828] Bluetooth: ffffffc0bad03ca8
513[ 1.972840] Bluetooth: ffffffc0bad03c98
514[ 1.972902] Bluetooth: ffffffc0bad03c98
515[ 1.973061] l2tp_netlink: L2TP netlink interface
516[ 1.974253] NET: Registered protocol family 27
517[ 1.980067] subsys-pil-tz 9300000.qcom,lpass: for adsp segments only will be dumped.
518[ 1.981643] subsys-pil-tz 1c00000.qcom,ssc: for slpi segments only will be dumped.
519[ 1.985326] pil-q6v5-mss 2080000.qcom,mss: for modem segments only will be dumped.
520[ 1.986846] cclogic 1-0001: Failed to get vbus regulator
521[ 1.986870] cclogic 1-0001: cclogic_probe Failed
522[ 1.993283] smbcharger_charger_otg: no parameters
523[ 1.993461] smbcharger_external_otg: no parameters
524[ 1.993527] smbcharger_external_otg: supplied by pmi8994_boost_5v
525[ 2.022550] qpnp-smbcharger qpnp-smbcharger-16: SMBCHG successfully probe Charger version=SCHG Revision DIG:2.0 ANA:2.1 batt=1 dc=0 usb=1
526[ 2.027555] cclogic_probe start
527[ 2.028929] [cclogic_regulator_configure][152]
528[ 2.033369] Registered cp15_barrier emulation handler
529[ 2.038122] fastrpc soc:qcom,msm-adsprpc-mem: for adsp_rh segments only will be dumped.
530[ 2.051001] [cclogic_match_id][1143]
531[ 2.151433] i2c-msm-v2 7575000.i2c: msm_bus_scale_register_client(mstr-id:86):0x22 (ok)
532[ 2.151808] cclogic:[tusb320hai_check_chip][334]
533[ 2.152308] cclogic:[tusb320hai_write_i2c][108]
534[ 2.152565] [cclogic_register][1183]
535[ 2.155222] file system registered
536[ 2.155277] mbim_init: initialize 1 instances
537[ 2.155419] mbim_init: Initialized 1 ports
538[ 2.157080] rndis_qc_init: initialize rndis QC instance
539[ 2.157308] Number of LUNs=8
540[ 2.157340] Mass Storage Function, version: 2009/09/11
541[ 2.157351] LUN: removable file: (no medium)
542[ 2.157393] Number of LUNs=1
543[ 2.157440] LUN: removable file: (no medium)
544[ 2.161636] key gpio value = 1 active_low = 1 state=0 home_button_status=0
545[ 2.170871] lmh_lite:lmh_parse_sensor Registering sensor:[LLM_cp00]
546[ 2.171759] lmh_lite:lmh_parse_sensor Registering sensor:[LLM_m4m0]
547[ 2.175071] parse_cpu_levels: idx 2 6022
548[ 2.175418] parse_cpu_levels: idx 2 11499
549[ 2.180436] rmnet_ipa started initialization
550[ 2.182796] ipa ipa_sps_irq_control_all:942 EP (5) not allocated.
551[ 2.190157] apc0_pwrcl_mem_acc_corner: disabling
552[ 2.190180] apcc_l3_mem_acc_corner: disabling
553[ 2.190282] wlan_en_vreg: disabling
554[ 2.190796] clock_late_init: Removing enables held for handed-off clocks
555[ 2.391291] [cclogic_irq][304]
556[ 2.391586] cclogic:[tusb320hai_read_i2c][41]
557[ 2.391800] cclogic:tusb320hai_get_state-->i2c register value: reg8=0x00 reg9=0xb0
558[ 2.391820] cclogic:[tusb320hai_read_i2c][41]
559[ 2.392446] [cclogic_do_real_work][745]
560[ 2.392480] [cclogic_vbus_power_on][59] enable=0
561[ 4.810706] EXT4-fs (mmcblk0p48): mounted filesystem with ordered data mode. Opts: (null)
562[ 5.113686] FG: soc_remap_process: pre_map_soc is 94,post_map_soc is 96
563[ 5.113866] FG: fg_batt_profile_init: Battery SOC: 96, V: 4233526uV
564[ 5.114688] of_batterydata_get_best_profile: ATL_2343799_lenovo_3500mah_averaged_masterslave_mar16th2016 found
565[ 5.117490] FG: soc_remap_process: pre_map_soc is 94,post_map_soc is 96
566[ 5.266166] android_work: android_work: sent uevent USB_STATE=CONNECTED
567[ 5.400908] dwc3 6a00000.dwc3: request ffffffc0b6877c80 was not queued to ep0out
568[ 5.404130] android_usb gadget: using random host ethernet address
569[ 5.541251] dwc3_gadget_suspend_interrupt(): state:0. Ignore SUSPEND.
570[ 5.570014] android_work: android_work: did not send uevent (0 0 0000000000000000)
571[ 5.949479] android_work: android_work: did not send uevent (0 0 0000000000000000)
572[ 6.074165] android_work: android_work: sent uevent USB_STATE=CONNECTED
573[ 6.077779] android_work: android_work: sent uevent USB_STATE=DISCONNECTED
574[ 6.227478] android_usb gadget: high-speed config #1: 66bf0c8.android_usb
575[ 6.227964] FG: soc_remap_process: pre_map_soc is 94,post_map_soc is 96
576[ 6.330268] FG: soc_remap_process: pre_map_soc is 94,post_map_soc is 96
577[ 6.332380] FG: soc_remap_process: pre_map_soc is 94,post_map_soc is 96
578[ 6.524434] dwc3 6a00000.dwc3: request ffffffc0b6877c80 was not queued to ep0out
579[ 6.545217] rndis_function_bind_config: rndis_function_bind_config MAC: 7E:D4:D5:5B:1D:0A
580[ 6.545292] android_usb gadget: using previous host ethernet address
581[ 6.834270] msm-dwc3 6a00000.ssusb: Avail curr from USB = 0
582[ 6.834971] FG: soc_remap_process: pre_map_soc is 94,post_map_soc is 96
583[ 6.843528] FG: soc_remap_process: pre_map_soc is 94,post_map_soc is 96
584[ 6.845806] FG: soc_remap_process: pre_map_soc is 94,post_map_soc is 96
585[ 6.962167] android_work: android_work: sent uevent USB_STATE=CONNECTED
586[ 6.965798] android_work: android_work: sent uevent USB_STATE=DISCONNECTED
587[ 7.081717] dwc3 6a00000.dwc3: request ffffffc0b6877c80 was not queued to ep0out
588[ 7.082096] [RMNET:HI] rmnet_config_notify_cb(): Kernel is trying to unregister rndis0
589[ 7.090238] [RMNET:HI] rmnet_config_notify_cb(): Kernel is trying to unregister rndis0
590[ 7.094177] rndis0: MAC ea:e1:1a:ee:bb:2c
591[ 7.245971] android_work: android_work: did not send uevent (0 0 0000000000000000)
592[ 7.396190] [RMNET:HI] rmnet_config_notify_cb(): Kernel is trying to unregister rndis0
593[ 7.396922] android_usb gadget: using random self ethernet address
594[ 7.397469] rndis0: HOST MAC 7e:d4:d5:5b:1d:0a
595[ 7.443017] [RMNET:HI] rmnet_config_notify_cb(): Kernel is trying to unregister rndis0
596[ 7.451129] android_usb gadget: using random self ethernet address
597[ 7.491781] IPv6: ADDRCONF(NETDEV_UP): rndis0: link is not ready
598[ 7.930152] android_work: android_work: sent uevent USB_STATE=CONNECTED
599[ 8.078077] android_work: android_work: sent uevent USB_STATE=CONNECTED
600[ 8.079743] IPv6: ADDRCONF(NETDEV_CHANGE): rndis0: link becomes ready
601[ 8.182100] FG: soc_remap_process: pre_map_soc is 94,post_map_soc is 96
602[ 8.467927] Modules linked in:
603[ 8.467960] Call trace:
604[ 8.467998] [<ffffffc000e116fc>] 0xffffffc000e116fc
605[ 8.468020] [<ffffffc000767fe8>] 0xffffffc000767fe8
606[ 8.468049] [<ffffffc00010cca0>] 0xffffffc00010cca0
607[ 8.468070] [<ffffffc00010c60c>] 0xffffffc00010c60c
608[ 8.468100] 7cc0: 72290a80 ffffffc0 00000000 00000080 81ab9000 00000000 010439c0 ffffffc0
609[ 8.468145] 7d20: be83ba20 ffffffc0 00000000 00000000 0160b540 ffffffc0 01604000 ffffffc0
610[ 8.468174] 7d60: 00000001 00000000 00000400 00000000 0020d000 00000000 00000400 00000000
611[ 8.468218] 7dc0: 72290a80 ffffffc0 0160b428 ffffffc0 bacf9a00 ffffffc0 01607e20 ffffffc0
612[ 8.468246] [<ffffffc0000d8b68>] 0xffffffc0000d8b68
613[ 8.468268] [<ffffffc0000fbfd8>] 0xffffffc0000fbfd8
614[ 8.468311] ------------[ cut here ]------------
615[ 8.468353] Hardware name: Qualcomm Technologies, Inc. MSM 8996 v3 + PMI8996 MTP (DT)
616[ 8.468362] Call trace:
617[ 8.468369] [<ffffffc00008b320>] 0xffffffc00008b320
618[ 8.468376] [<ffffffc00008b738>] 0xffffffc00008b738
619[ 8.468383] [<ffffffc001036638>] 0xffffffc001036638
620[ 8.468391] [<ffffffc0000ab130>] 0xffffffc0000ab130
621[ 8.468398] [<ffffffc000e116fc>] 0xffffffc000e116fc
622[ 8.468419] [<ffffffc000767fe8>] 0xffffffc000767fe8
623[ 8.468455] [<ffffffc00010cefc>] 0xffffffc00010cefc
624[ 8.468486] Exception stack(0xffffffc001607cc0 to 0xffffffc001607df0)
625[ 8.468529] 7d00: 00000000 00000000 80000000 00000000 00000000 00000000 00989680 00000000
626[ 8.468573] 7d60: 00000001 00000000 00000400 00000000 0020d000 00000000 00000400 00000000
627[ 8.468617] 7dc0: 72290a80 ffffffc0 0160b428 ffffffc0 bacf9a00 ffffffc0 01607e20 ffffffc0
628[ 8.468638] [<ffffffc0000861b4>] 0xffffffc0000861b4
629[ 8.468660] [<ffffffc00103fff8>] 0xffffffc00103fff8
630[ 8.468690] ---[ end trace 6ce47dfcfd40f671 ]---
631[ 8.675124] preinit: (8.67) BOOTSTATE = USER
632[ 8.676649] preinit: (8.67) Booting to default.target
633[ 8.716171] ------------[ cut here ]------------
634[ 8.716196] WARNING: CPU: 0 PID: 0 at /home/pseudodev/hadk/kernel/zuk/msm8996/net/core/skbuff.c:616 0xffffffc000e116fc()
635[ 8.716243] Call trace:
636[ 8.716280] [<ffffffc000e116fc>] 0xffffffc000e116fc
637[ 8.716317] [<ffffffc00073085c>] 0xffffffc00073085c
638[ 8.716354] [<ffffffc00010c60c>] 0xffffffc00010c60c
639[ 8.716384] 7ca0: 017d8000 ffffffc0 00000000 00000080 81ab9000 00000000 001a51cc ffffffc0
640[ 8.716430] 7d00: 00000140 00000000 015dbd48 ffffffc0 0160b540 ffffffc0 01604000 ffffffc0
641[ 8.716475] 7d60: 00000004 00000000 017d8000 ffffffc0 01607e20 ffffffc0 015d6ca8 ffffffc0
642[ 8.716504] 7da0: 721dde80 ffffffc0 01604000 ffffffc0 01604000 ffffffc0 01607e00 ffffffc0
643[ 8.716540] [<ffffffc0000fbf00>] 0xffffffc0000fbf00
644[ 8.716547] [<ffffffc0010305ec>] 0xffffffc0010305ec
645[ 8.716555] [<ffffffc00155d998>] 0xffffffc00155d998
646[ 8.716562] ---[ end trace 6ce47dfcfd40f672 ]---
647[ 8.784465] systemd[1]: Failed to insert module 'autofs4': Function not implemented
648[ 8.815518] systemd[1]: systemd 225 running in system mode. (+PAM -AUDIT -SELINUX +IMA -APPARMOR +SMACK -SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT -GNUTLS +ACL +XZ -LZ4 -SECCOMP +BLKID -ELFUTILS +KMOD -IDN)
649[ 8.816791] systemd[1]: Set hostname to <Sailfish>.
650[ 9.041761] systemd[1]: Reached target Login Prompts.
651[ 9.042951] systemd[1]: Reached target Swap.
652[ 9.044601] systemd[1]: Listening on Journal Audit Socket.
653[ 9.045240] systemd[1]: Listening on udev Kernel Socket.
654[ 9.051823] systemd[1]: Starting Create list of required static device nodes for the current kernel...
655[ 9.053491] systemd[1]: Starting Setup Virtual Console...
656[ 9.056742] systemd[1]: Starting Remount Root and Kernel File Systems...
657[ 9.068970] systemd[1]: Created slice User and Session Slice.
658[ 9.069259] systemd[1]: Reached target Slices.
659[ 9.071577] systemd[1]: Starting Journal Service...
660[ 9.078999] systemd[1]: dev-cpuctl.mount: Mount process exited, code=exited status=32
661[ 9.080587] systemd[1]: Failed to mount Droid mount for /dev/stune.
662[ 9.130789] systemd[1]: Started Remount Root and Kernel File Systems.
663[ 9.287415] systemd[1]: Started Clean RPM db region files at each reboot.
664[ 9.309787] systemd[1]: Started Journal Service.
665[ 9.719281] WARNING: CPU: 0 PID: 760 at /home/pseudodev/hadk/kernel/zuk/msm8996/net/core/skbuff.c:616 0xffffffc000e116fc()
666[ 9.719339] Call trace:
667[ 9.719348] [<ffffffc00008b320>] 0xffffffc00008b320
668[ 9.719377] [<ffffffc0000ab130>] 0xffffffc0000ab130
669[ 9.719386] [<ffffffc000e116fc>] 0xffffffc000e116fc
670[ 9.719397] [<ffffffc000e117d8>] 0xffffffc000e117d8
671[ 9.719409] [<ffffffc0007998cc>] 0xffffffc0007998cc
672[ 9.719421] [<ffffffc000767fe8>] 0xffffffc000767fe8
673[ 9.719431] [<ffffffc00072ec2c>] 0xffffffc00072ec2c
674[ 9.719440] [<ffffffc00073085c>] 0xffffffc00073085c
675[ 9.719450] [<ffffffc000732110>] 0xffffffc000732110
676[ 9.719459] [<ffffffc00010cca0>] 0xffffffc00010cca0
677[ 9.719515] Exception stack(0xffffffc0b6b43aa0 to 0xffffffc0b6b43bd0)
678[ 9.719604] 3b00: 00000000 00000000 00000000 00000000 b6a4ae10 ffffffc0 b6b40000 ffffffc0
679[ 9.719675] 3b60: 00000004 00000000 723c8700 ffffffc0 be83b000 ffffffc0 b90fdb00 ffffffc0
680[ 9.719718] 3ba0: 723c9500 ffffffc0 b6a4acf0 ffffffc0 bad50000 ffffffc0 b6b43c00 ffffffc0
681[ 9.719774] [<ffffffc00103fff8>] 0xffffffc00103fff8
682[ 9.719802] [<ffffffc0000a9534>] 0xffffffc0000a9534
683[ 9.719830] ---[ end trace 6ce47dfcfd40f673 ]---
684[ 9.719867] Modules linked in:
685[ 9.719884] CPU: 0 PID: 760 Comm: systemd-udevd Tainted: G W 3.18.119-KronicCore #3
686[ 9.719908] Call trace:
687[ 9.719954] [<ffffffc0000ab130>] 0xffffffc0000ab130
688[ 9.720003] [<ffffffc00072ec2c>] 0xffffffc00072ec2c
689[ 9.720050] [<ffffffc000110090>] 0xffffffc000110090
690[ 9.720128] 3ac0: 60400145 00000000 000fc2c0 ffffffc0 be83b000 ffffffc0 00002d8b 00000000
691[ 9.720175] 3b00: 00000000 00000000 00000000 00000000 b6a4ae10 ffffffc0 b6b40000 ffffffc0
692[ 9.720220] 3b40: 00000001 00000000 00000400 00000000 0020d000 00000000 00000400 00000000
693[ 9.720263] 3b80: 00000001 00000000 015d8000 ffffffc0 01828000 ffffffc0 0103fff8 ffffffc0
694[ 9.720326] [<ffffffc0000d8b68>] 0xffffffc0000d8b68
695[ 9.720365] [<ffffffc001041a54>] 0xffffffc001041a54
696[ 9.867421] FG: soc_remap_process: pre_map_soc is 94,post_map_soc is 96
697[ 10.473600] msm_thermal:do_cluster_freq_ctrl Limiting CPU0 max frequency to 1228800. Temp:71
698[ 10.473660] msm_thermal:do_cluster_freq_ctrl Limiting CPU3 max frequency to 1824000. Temp:71
699[ 10.488236] Modules linked in:
700[ 10.488276] Hardware name: Qualcomm Technologies, Inc. MSM 8996 v3 + PMI8996 MTP (DT)