· 6 years ago · Sep 13, 2019, 05:32 PM
1[ 0.037747] pcpu-alloc: s151552 r8192 d28672 u524288 alloc=1*2097152
2[ 0.037748] pcpu-alloc: [0] 0 1 2 3
3[ 0.037769] Built 1 zonelists, mobility grouping on. Total pages: 1008321
4[ 0.037769] Policy zone: Normal
5[ 0.037770] Kernel command line: BOOT_IMAGE=/vmlinuz-5.0.0-27-generic root=UUID=7233a212-a8bc-4b94-9285-477124fd115f ro quiet splash vt.handoff=1
6[ 0.043742] Calgary: detecting Calgary via BIOS EBDA area
7[ 0.043744] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
8[ 0.058295] Memory: 3892488K/4097400K available (14339K kernel code, 2335K rwdata, 4316K rodata, 2584K init, 5196K bss, 204912K reserved, 0K cma-reserved)
9[ 0.058401] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
10[ 0.058407] Kernel/User page tables isolation: enabled
11[ 0.058422] ftrace: allocating 41591 entries in 163 pages
12[ 0.072366] rcu: Hierarchical RCU implementation.
13[ 0.072367] rcu: RCU restricting CPUs from NR_CPUS=8192 to nr_cpu_ids=4.
14[ 0.072368] Tasks RCU enabled.
15[ 0.072369] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies.
16[ 0.072369] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
17[ 0.074613] NR_IRQS: 524544, nr_irqs: 456, preallocated irqs: 16
18[ 0.074800] vt handoff: transparent VT on vt#1
19[ 0.074804] Console: colour dummy device 80x25
20[ 0.074809] printk: console [tty0] enabled
21[ 0.074823] ACPI: Core revision 20181213
22[ 0.075014] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484882848 ns
23[ 0.075023] hpet clockevent registered
24[ 0.075028] APIC: Switch to symmetric I/O mode setup
25[ 0.075402] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
26[ 0.095032] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x25646885a38, max_idle_ns: 440795311131 ns
27[ 0.095042] Calibrating delay loop (skipped), value calculated using timer frequency.. 5188.17 BogoMIPS (lpj=10376340)
28[ 0.095044] pid_max: default: 32768 minimum: 301
29[ 0.095069] LSM: Security Framework initializing
30[ 0.095077] Yama: becoming mindful.
31[ 0.095091] AppArmor: AppArmor initialized
32[ 0.095898] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
33[ 0.096309] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
34[ 0.096333] Mount-cache hash table entries: 8192 (order: 4, 65536 bytes)
35[ 0.096346] Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes)
36[ 0.096532] ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
37[ 0.096533] ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8)
38[ 0.096544] mce: CPU0: Thermal monitoring enabled (TM1)
39[ 0.096553] process: using mwait in idle threads
40[ 0.096555] Last level iTLB entries: 4KB 1024, 2MB 1024, 4MB 1024
41[ 0.096555] Last level dTLB entries: 4KB 1024, 2MB 1024, 4MB 1024, 1GB 4
42[ 0.096556] Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization
43[ 0.096557] Spectre V2 : Mitigation: Full generic retpoline
44[ 0.096557] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch
45[ 0.096558] Spectre V2 : Enabling Restricted Speculation for firmware calls
46[ 0.096563] Spectre V2 : mitigation: Enabling conditional Indirect Branch Prediction Barrier
47[ 0.096564] Spectre V2 : User space: Mitigation: STIBP via seccomp and prctl
48[ 0.096565] Speculative Store Bypass: Mitigation: Speculative Store Bypass disabled via prctl and seccomp
49[ 0.096584] MDS: Mitigation: Clear CPU buffers
50[ 0.096727] Freeing SMP alternatives memory: 36K
51[ 0.099090] TSC deadline timer enabled
52[ 0.099092] smpboot: CPU0: Intel(R) Core(TM) i5-4210M CPU @ 2.60GHz (family: 0x6, model: 0x3c, stepping: 0x3)
53[ 0.099169] Performance Events: PEBS fmt2+, Haswell events, 16-deep LBR, full-width counters, Intel PMU driver.
54[ 0.099207] ... version: 3
55[ 0.099207] ... bit width: 48
56[ 0.099207] ... generic registers: 4
57[ 0.099208] ... value mask: 0000ffffffffffff
58[ 0.099208] ... max period: 00007fffffffffff
59[ 0.099209] ... fixed-purpose events: 3
60[ 0.099209] ... event mask: 000000070000000f
61[ 0.099240] rcu: Hierarchical SRCU implementation.
62[ 0.099798] random: crng done (trusting CPU's manufacturer)
63[ 0.100065] NMI watchdog: Enabled. Permanently consumes one hw-PMU counter.
64[ 0.100108] smp: Bringing up secondary CPUs ...
65[ 0.100174] x86: Booting SMP configuration:
66[ 0.100174] .... node #0, CPUs: #1 #2
67[ 0.101906] MDS CPU bug present and SMT on, data leak possible. See https://www.kernel.org/doc/html/latest/admin-guide/hw-vuln/mds.html for more details.
68[ 0.101906] #3
69[ 0.101906] smp: Brought up 1 node, 4 CPUs
70[ 0.101906] smpboot: Max logical packages: 1
71[ 0.101906] smpboot: Total of 4 processors activated (20752.68 BogoMIPS)
72[ 0.103197] devtmpfs: initialized
73[ 0.103197] x86/mm: Memory block size: 128MB
74[ 0.103342] PM: Registering ACPI NVS region [mem 0xce42b000-0xce431fff] (28672 bytes)
75[ 0.103342] PM: Registering ACPI NVS region [mem 0xda71b000-0xda7fffff] (937984 bytes)
76[ 0.103342] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
77[ 0.103342] futex hash table entries: 1024 (order: 4, 65536 bytes)
78[ 0.103342] pinctrl core: initialized pinctrl subsystem
79[ 0.103342] RTC time: 15:08:02, date: 2019-09-13
80[ 0.103342] NET: Registered protocol family 16
81[ 0.103342] audit: initializing netlink subsys (disabled)
82[ 0.103342] audit: type=2000 audit(1568387282.028:1): state=initialized audit_enabled=0 res=1
83[ 0.103342] EISA bus registered
84[ 0.103342] cpuidle: using governor ladder
85[ 0.103342] cpuidle: using governor menu
86[ 0.103342] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
87[ 0.103342] ACPI: bus type PCI registered
88[ 0.103342] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
89[ 0.103342] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000)
90[ 0.103342] PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in E820
91[ 0.103342] PCI: Using configuration type 1 for base access
92[ 0.103342] core: PMU erratum BJ122, BV98, HSD29 worked around, HT is on
93[ 0.104091] HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages
94[ 0.104091] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
95[ 0.104091] ACPI: Added _OSI(Module Device)
96[ 0.104091] ACPI: Added _OSI(Processor Device)
97[ 0.104091] ACPI: Added _OSI(3.0 _SCP Extensions)
98[ 0.104091] ACPI: Added _OSI(Processor Aggregator Device)
99[ 0.104091] ACPI: Added _OSI(Linux-Dell-Video)
100[ 0.104091] ACPI: Added _OSI(Linux-Lenovo-NV-HDMI-Audio)
101[ 0.104091] ACPI: Added _OSI(Linux-HPI-Hybrid-Graphics)
102[ 0.116974] ACPI: 6 ACPI AML tables successfully acquired and loaded
103[ 0.118923] ACPI: [Firmware Bug]: BIOS _OSI(Linux) query ignored
104[ 0.124086] ACPI: Dynamic OEM Table Load:
105[ 0.124091] ACPI: SSDT 0xFFFFA00BD9B78800 0003D3 (v01 PmRef Cpu0Cst 00003001 INTL 20120711)
106[ 0.124598] ACPI: Dynamic OEM Table Load:
107[ 0.124602] ACPI: SSDT 0xFFFFA00BD9A81800 0005AA (v01 PmRef ApIst 00003000 INTL 20120711)
108[ 0.125146] ACPI: Dynamic OEM Table Load:
109[ 0.125149] ACPI: SSDT 0xFFFFA00BD9B10A00 000119 (v01 PmRef ApCst 00003000 INTL 20120711)
110[ 0.126172] ACPI: EC: EC started
111[ 0.126172] ACPI: EC: interrupt blocked
112[ 0.127187] ACPI: \_SB_.PCI0.LPCB.ECDV: Used as first EC
113[ 0.127187] ACPI: \_SB_.PCI0.LPCB.ECDV: GPE=0x10, EC_CMD/EC_SC=0x934, EC_DATA=0x930
114[ 0.127187] ACPI: \_SB_.PCI0.LPCB.ECDV: Used as boot DSDT EC to handle transactions
115[ 0.127187] ACPI: Interpreter enabled
116[ 0.127187] ACPI: (supports S0 S3 S4 S5)
117[ 0.127187] ACPI: Using IOAPIC for interrupt routing
118[ 0.127187] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
119[ 0.127466] ACPI: Enabled 6 GPEs in block 00 to 3F
120[ 0.137481] acpi LNXIOBAY:00: ACPI dock station (docks/bays count: 1)
121[ 0.146384] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3e])
122[ 0.146388] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
123[ 0.146679] acpi PNP0A08:00: _OSC: platform does not support [PCIeHotplug SHPCHotplug PME]
124[ 0.146839] acpi PNP0A08:00: _OSC: OS now controls [AER PCIeCapability LTR]
125[ 0.146840] acpi PNP0A08:00: FADT indicates ASPM is unsupported, using BIOS configuration
126[ 0.148410] PCI host bridge to bus 0000:00
127[ 0.148412] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window]
128[ 0.148413] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window]
129[ 0.148414] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
130[ 0.148415] pci_bus 0000:00: root bus resource [mem 0x000dc000-0x000dffff window]
131[ 0.148415] pci_bus 0000:00: root bus resource [mem 0x000e0000-0x000e3fff window]
132[ 0.148416] pci_bus 0000:00: root bus resource [mem 0x000e4000-0x000e7fff window]
133[ 0.148417] pci_bus 0000:00: root bus resource [mem 0xdf200000-0xfeafffff window]
134[ 0.148418] pci_bus 0000:00: root bus resource [bus 00-3e]
135[ 0.148424] pci 0000:00:00.0: [8086:0c04] type 00 class 0x060000
136[ 0.148522] pci 0000:00:01.0: [8086:0c01] type 01 class 0x060400
137[ 0.148554] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
138[ 0.148681] pci 0000:00:02.0: [8086:0416] type 00 class 0x030000
139[ 0.148689] pci 0000:00:02.0: reg 0x10: [mem 0xf5800000-0xf5bfffff 64bit]
140[ 0.148694] pci 0000:00:02.0: reg 0x18: [mem 0xe0000000-0xefffffff 64bit pref]
141[ 0.148697] pci 0000:00:02.0: reg 0x20: [io 0xf000-0xf03f]
142[ 0.148777] pci 0000:00:03.0: [8086:0c0c] type 00 class 0x040300
143[ 0.148784] pci 0000:00:03.0: reg 0x10: [mem 0xf7c34000-0xf7c37fff 64bit]
144[ 0.148888] pci 0000:00:14.0: [8086:8c31] type 00 class 0x0c0330
145[ 0.148907] pci 0000:00:14.0: reg 0x10: [mem 0xf7c20000-0xf7c2ffff 64bit]
146[ 0.148959] pci 0000:00:14.0: PME# supported from D3hot D3cold
147[ 0.149039] pci 0000:00:16.0: [8086:8c3a] type 00 class 0x078000
148[ 0.149057] pci 0000:00:16.0: reg 0x10: [mem 0xf7c40000-0xf7c4000f 64bit]
149[ 0.149113] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
150[ 0.149194] pci 0000:00:19.0: [8086:153a] type 00 class 0x020000
151[ 0.149211] pci 0000:00:19.0: reg 0x10: [mem 0xf7c00000-0xf7c1ffff]
152[ 0.149218] pci 0000:00:19.0: reg 0x14: [mem 0xf7c3d000-0xf7c3dfff]
153[ 0.149225] pci 0000:00:19.0: reg 0x18: [io 0xf080-0xf09f]
154[ 0.149276] pci 0000:00:19.0: PME# supported from D0 D3hot D3cold
155[ 0.149358] pci 0000:00:1a.0: [8086:8c2d] type 00 class 0x0c0320
156[ 0.149378] pci 0000:00:1a.0: reg 0x10: [mem 0xf7c3c000-0xf7c3c3ff]
157[ 0.149452] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
158[ 0.149536] pci 0000:00:1b.0: [8086:8c20] type 00 class 0x040300
159[ 0.149554] pci 0000:00:1b.0: reg 0x10: [mem 0xf7c30000-0xf7c33fff 64bit]
160[ 0.149616] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
161[ 0.149696] pci 0000:00:1c.0: [8086:8c10] type 01 class 0x060400
162[ 0.149770] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
163[ 0.149902] pci 0000:00:1c.2: [8086:8c14] type 01 class 0x060400
164[ 0.149975] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
165[ 0.150106] pci 0000:00:1c.4: [8086:8c18] type 01 class 0x060400
166[ 0.150180] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
167[ 0.150306] pci 0000:00:1c.5: [8086:8c1a] type 01 class 0x060400
168[ 0.150379] pci 0000:00:1c.5: PME# supported from D0 D3hot D3cold
169[ 0.150509] pci 0000:00:1c.6: [8086:8c1c] type 01 class 0x060400
170[ 0.150582] pci 0000:00:1c.6: PME# supported from D0 D3hot D3cold
171[ 0.150709] pci 0000:00:1c.7: [8086:8c1e] type 01 class 0x060400
172[ 0.150781] pci 0000:00:1c.7: PME# supported from D0 D3hot D3cold
173[ 0.150908] pci 0000:00:1d.0: [8086:8c26] type 00 class 0x0c0320
174[ 0.150928] pci 0000:00:1d.0: reg 0x10: [mem 0xf7c3b000-0xf7c3b3ff]
175[ 0.151003] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
176[ 0.151091] pci 0000:00:1f.0: [8086:8c4f] type 00 class 0x060100
177[ 0.151259] pci 0000:00:1f.2: [8086:282a] type 00 class 0x010400
178[ 0.151273] pci 0000:00:1f.2: reg 0x10: [io 0xf0d0-0xf0d7]
179[ 0.151279] pci 0000:00:1f.2: reg 0x14: [io 0xf0c0-0xf0c3]
180[ 0.151285] pci 0000:00:1f.2: reg 0x18: [io 0xf0b0-0xf0b7]
181[ 0.151292] pci 0000:00:1f.2: reg 0x1c: [io 0xf0a0-0xf0a3]
182[ 0.151298] pci 0000:00:1f.2: reg 0x20: [io 0xf060-0xf07f]
183[ 0.151305] pci 0000:00:1f.2: reg 0x24: [mem 0xf7c3a000-0xf7c3a7ff]
184[ 0.151336] pci 0000:00:1f.2: PME# supported from D3hot
185[ 0.151411] pci 0000:00:1f.3: [8086:8c22] type 00 class 0x0c0500
186[ 0.151428] pci 0000:00:1f.3: reg 0x10: [mem 0xf7c39000-0xf7c390ff 64bit]
187[ 0.151445] pci 0000:00:1f.3: reg 0x20: [io 0xf040-0xf05f]
188[ 0.151556] pci 0000:00:01.0: PCI bridge to [bus 01]
189[ 0.151608] pci 0000:00:1c.0: PCI bridge to [bus 02]
190[ 0.151679] pci 0000:03:00.0: [168c:0032] type 00 class 0x028000
191[ 0.151734] pci 0000:03:00.0: reg 0x10: [mem 0xf7b00000-0xf7b7ffff 64bit]
192[ 0.151813] pci 0000:03:00.0: reg 0x30: [mem 0xf7b80000-0xf7b8ffff pref]
193[ 0.151936] pci 0000:03:00.0: supports D1 D2
194[ 0.151937] pci 0000:03:00.0: PME# supported from D0 D1 D2 D3hot D3cold
195[ 0.152081] pci 0000:00:1c.2: PCI bridge to [bus 03]
196[ 0.152085] pci 0000:00:1c.2: bridge window [mem 0xf7b00000-0xf7bfffff]
197[ 0.152130] pci 0000:00:1c.4: PCI bridge to [bus 04]
198[ 0.152133] pci 0000:00:1c.4: bridge window [io 0xe000-0xefff]
199[ 0.152136] pci 0000:00:1c.4: bridge window [mem 0xf7000000-0xf79fffff]
200[ 0.152141] pci 0000:00:1c.4: bridge window [mem 0xf1400000-0xf1dfffff 64bit pref]
201[ 0.152185] pci 0000:00:1c.5: PCI bridge to [bus 05]
202[ 0.152188] pci 0000:00:1c.5: bridge window [io 0xd000-0xdfff]
203[ 0.152191] pci 0000:00:1c.5: bridge window [mem 0xf6600000-0xf6ffffff]
204[ 0.152196] pci 0000:00:1c.5: bridge window [mem 0xf0a00000-0xf13fffff 64bit pref]
205[ 0.152253] acpiphp: Slot [1] registered
206[ 0.152258] pci 0000:00:1c.6: PCI bridge to [bus 06-0d]
207[ 0.152261] pci 0000:00:1c.6: bridge window [io 0xb000-0xcfff]
208[ 0.152264] pci 0000:00:1c.6: bridge window [mem 0xf5c00000-0xf65fffff]
209[ 0.152268] pci 0000:00:1c.6: bridge window [mem 0xf0000000-0xf09fffff 64bit pref]
210[ 0.152399] pci 0000:0e:00.0: [1217:8520] type 00 class 0x080501
211[ 0.152428] pci 0000:0e:00.0: reg 0x10: [mem 0xf7a01000-0xf7a01fff]
212[ 0.152439] pci 0000:0e:00.0: reg 0x14: [mem 0xf7a00000-0xf7a007ff]
213[ 0.152567] pci 0000:0e:00.0: PME# supported from D3hot D3cold
214[ 0.163129] pci 0000:00:1c.7: PCI bridge to [bus 0e]
215[ 0.163134] pci 0000:00:1c.7: bridge window [mem 0xf7a00000-0xf7afffff]
216[ 0.165711] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 10 *11 12 14 15)
217[ 0.165778] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 *10 11 12 14 15)
218[ 0.165839] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 10 *11 12 14 15)
219[ 0.165900] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 *10 11 12 14 15)
220[ 0.165961] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 *5 6 10 11 12 14 15)
221[ 0.166027] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 *5 6 10 11 12 14 15)
222[ 0.166088] ACPI: PCI Interrupt Link [LNKG] (IRQs *3 4 5 6 10 11 12 14 15)
223[ 0.166154] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
224[ 0.167758] ACPI: EC: interrupt unblocked
225[ 0.167778] ACPI: EC: event unblocked
226[ 0.167796] ACPI: \_SB_.PCI0.LPCB.ECDV: GPE=0x10, EC_CMD/EC_SC=0x934, EC_DATA=0x930
227[ 0.167797] ACPI: \_SB_.PCI0.LPCB.ECDV: Used as boot DSDT EC to handle transactions and events
228[ 0.167841] SCSI subsystem initialized
229[ 0.167841] libata version 3.00 loaded.
230[ 0.167841] pci 0000:00:02.0: vgaarb: setting as boot VGA device
231[ 0.167841] pci 0000:00:02.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
232[ 0.167841] pci 0000:00:02.0: vgaarb: bridge control possible
233[ 0.167841] vgaarb: loaded
234[ 0.167841] ACPI: bus type USB registered
235[ 0.167841] usbcore: registered new interface driver usbfs
236[ 0.167841] usbcore: registered new interface driver hub
237[ 0.167841] usbcore: registered new device driver usb
238[ 0.167841] pps_core: LinuxPPS API ver. 1 registered
239[ 0.167841] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
240[ 0.167841] PTP clock support registered
241[ 0.167841] EDAC MC: Ver: 3.0.0
242[ 0.167841] PCI: Using ACPI for IRQ routing
243[ 0.168447] PCI: pci_cache_line_size set to 64 bytes
244[ 0.168579] e820: reserve RAM buffer [mem 0x00091800-0x0009ffff]
245[ 0.168580] e820: reserve RAM buffer [mem 0xce42b000-0xcfffffff]
246[ 0.168581] e820: reserve RAM buffer [mem 0xcee35000-0xcfffffff]
247[ 0.168582] e820: reserve RAM buffer [mem 0xd7db2000-0xd7ffffff]
248[ 0.168583] e820: reserve RAM buffer [mem 0xd8758000-0xdbffffff]
249[ 0.168584] e820: reserve RAM buffer [mem 0xd8faa000-0xdbffffff]
250[ 0.168585] e820: reserve RAM buffer [mem 0xda71b000-0xdbffffff]
251[ 0.168585] e820: reserve RAM buffer [mem 0xdbce9000-0xdbffffff]
252[ 0.168586] e820: reserve RAM buffer [mem 0x11ee00000-0x11fffffff]
253[ 0.168666] NetLabel: Initializing
254[ 0.168667] NetLabel: domain hash size = 128
255[ 0.168667] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO
256[ 0.168678] NetLabel: unlabeled traffic allowed by default
257[ 0.168690] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
258[ 0.168690] hpet0: 8 comparators, 64-bit 14.318180 MHz counter
259[ 0.173062] clocksource: Switched to clocksource tsc-early
260[ 0.180135] VFS: Disk quotas dquot_6.6.0
261[ 0.180149] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
262[ 0.180245] AppArmor: AppArmor Filesystem Enabled
263[ 0.180272] pnp: PnP ACPI init
264[ 0.180382] system 00:00: [mem 0xfed40000-0xfed44fff] has been reserved
265[ 0.180386] system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)
266[ 0.180596] system 00:01: [io 0x0680-0x069f] has been reserved
267[ 0.180597] system 00:01: [io 0xffff] has been reserved
268[ 0.180598] system 00:01: [io 0xffff] has been reserved
269[ 0.180599] system 00:01: [io 0xffff] has been reserved
270[ 0.180600] system 00:01: [io 0x1c00-0x1cfe] has been reserved
271[ 0.180601] system 00:01: [io 0x1d00-0x1dfe] has been reserved
272[ 0.180602] system 00:01: [io 0x1e00-0x1efe] has been reserved
273[ 0.180603] system 00:01: [io 0x1f00-0x1ffe] has been reserved
274[ 0.180603] system 00:01: [io 0x1800-0x18fe] has been reserved
275[ 0.180604] system 00:01: [io 0x164e-0x164f] has been reserved
276[ 0.180607] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
277[ 0.180625] pnp 00:02: Plug and Play ACPI device, IDs PNP0b00 (active)
278[ 0.180672] system 00:03: [io 0x1854-0x1857] has been reserved
279[ 0.180675] system 00:03: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)
280[ 0.180720] system 00:04: [io 0x04d0-0x04d1] has been reserved
281[ 0.180723] system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active)
282[ 0.180751] pnp 00:05: Plug and Play ACPI device, IDs PNP0303 (active)
283[ 0.180766] pnp 00:06: Plug and Play ACPI device, IDs DLL05be PNP0f13 (active)
284[ 0.181562] pnp 00:07: Plug and Play ACPI device, IDs PNP0401 (disabled)
285[ 0.182908] system 00:08: [mem 0xfed1c000-0xfed1ffff] has been reserved
286[ 0.182910] system 00:08: [mem 0xfed10000-0xfed17fff] has been reserved
287[ 0.182911] system 00:08: [mem 0xfed18000-0xfed18fff] has been reserved
288[ 0.182911] system 00:08: [mem 0xfed19000-0xfed19fff] has been reserved
289[ 0.182912] system 00:08: [mem 0xf8000000-0xfbffffff] has been reserved
290[ 0.182913] system 00:08: [mem 0xfed20000-0xfed3ffff] has been reserved
291[ 0.182914] system 00:08: [mem 0xfed90000-0xfed93fff] has been reserved
292[ 0.182915] system 00:08: [mem 0xfed45000-0xfed8ffff] has been reserved
293[ 0.182916] system 00:08: [mem 0xff000000-0xffffffff] has been reserved
294[ 0.182917] system 00:08: [mem 0xfee00000-0xfeefffff] could not be reserved
295[ 0.182918] system 00:08: [mem 0xf7fdf000-0xf7fdffff] has been reserved
296[ 0.182919] system 00:08: [mem 0xf7fe0000-0xf7feffff] has been reserved
297[ 0.182922] system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active)
298[ 0.184916] pnp: PnP ACPI: found 9 devices
299[ 0.190497] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
300[ 0.190518] pci 0000:00:1c.0: bridge window [io 0x1000-0x0fff] to [bus 02] add_size 1000
301[ 0.190520] pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 02] add_size 200000 add_align 100000
302[ 0.190521] pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff] to [bus 02] add_size 200000 add_align 100000
303[ 0.190560] pci 0000:00:1c.0: BAR 14: assigned [mem 0xdf200000-0xdf3fffff]
304[ 0.190564] pci 0000:00:1c.0: BAR 15: assigned [mem 0xdf400000-0xdf5fffff 64bit pref]
305[ 0.190565] pci 0000:00:1c.0: BAR 13: assigned [io 0x2000-0x2fff]
306[ 0.190567] pci 0000:00:01.0: PCI bridge to [bus 01]
307[ 0.190576] pci 0000:00:1c.0: PCI bridge to [bus 02]
308[ 0.190582] pci 0000:00:1c.0: bridge window [io 0x2000-0x2fff]
309[ 0.190586] pci 0000:00:1c.0: bridge window [mem 0xdf200000-0xdf3fffff]
310[ 0.190589] pci 0000:00:1c.0: bridge window [mem 0xdf400000-0xdf5fffff 64bit pref]
311[ 0.190594] pci 0000:00:1c.2: PCI bridge to [bus 03]
312[ 0.190598] pci 0000:00:1c.2: bridge window [mem 0xf7b00000-0xf7bfffff]
313[ 0.190605] pci 0000:00:1c.4: PCI bridge to [bus 04]
314[ 0.190607] pci 0000:00:1c.4: bridge window [io 0xe000-0xefff]
315[ 0.190611] pci 0000:00:1c.4: bridge window [mem 0xf7000000-0xf79fffff]
316[ 0.190614] pci 0000:00:1c.4: bridge window [mem 0xf1400000-0xf1dfffff 64bit pref]
317[ 0.190619] pci 0000:00:1c.5: PCI bridge to [bus 05]
318[ 0.190622] pci 0000:00:1c.5: bridge window [io 0xd000-0xdfff]
319[ 0.190626] pci 0000:00:1c.5: bridge window [mem 0xf6600000-0xf6ffffff]
320[ 0.190629] pci 0000:00:1c.5: bridge window [mem 0xf0a00000-0xf13fffff 64bit pref]
321[ 0.190634] pci 0000:00:1c.6: PCI bridge to [bus 06-0d]
322[ 0.190636] pci 0000:00:1c.6: bridge window [io 0xb000-0xcfff]
323[ 0.190640] pci 0000:00:1c.6: bridge window [mem 0xf5c00000-0xf65fffff]
324[ 0.190643] pci 0000:00:1c.6: bridge window [mem 0xf0000000-0xf09fffff 64bit pref]
325[ 0.190648] pci 0000:00:1c.7: PCI bridge to [bus 0e]
326[ 0.190652] pci 0000:00:1c.7: bridge window [mem 0xf7a00000-0xf7afffff]
327[ 0.190660] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window]
328[ 0.190660] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window]
329[ 0.190661] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
330[ 0.190662] pci_bus 0000:00: resource 7 [mem 0x000dc000-0x000dffff window]
331[ 0.190663] pci_bus 0000:00: resource 8 [mem 0x000e0000-0x000e3fff window]
332[ 0.190664] pci_bus 0000:00: resource 9 [mem 0x000e4000-0x000e7fff window]
333[ 0.190664] pci_bus 0000:00: resource 10 [mem 0xdf200000-0xfeafffff window]
334[ 0.190666] pci_bus 0000:02: resource 0 [io 0x2000-0x2fff]
335[ 0.190666] pci_bus 0000:02: resource 1 [mem 0xdf200000-0xdf3fffff]
336[ 0.190667] pci_bus 0000:02: resource 2 [mem 0xdf400000-0xdf5fffff 64bit pref]
337[ 0.190668] pci_bus 0000:03: resource 1 [mem 0xf7b00000-0xf7bfffff]
338[ 0.190669] pci_bus 0000:04: resource 0 [io 0xe000-0xefff]
339[ 0.190670] pci_bus 0000:04: resource 1 [mem 0xf7000000-0xf79fffff]
340[ 0.190670] pci_bus 0000:04: resource 2 [mem 0xf1400000-0xf1dfffff 64bit pref]
341[ 0.190671] pci_bus 0000:05: resource 0 [io 0xd000-0xdfff]
342[ 0.190672] pci_bus 0000:05: resource 1 [mem 0xf6600000-0xf6ffffff]
343[ 0.190672] pci_bus 0000:05: resource 2 [mem 0xf0a00000-0xf13fffff 64bit pref]
344[ 0.190673] pci_bus 0000:06: resource 0 [io 0xb000-0xcfff]
345[ 0.190674] pci_bus 0000:06: resource 1 [mem 0xf5c00000-0xf65fffff]
346[ 0.190675] pci_bus 0000:06: resource 2 [mem 0xf0000000-0xf09fffff 64bit pref]
347[ 0.190675] pci_bus 0000:0e: resource 1 [mem 0xf7a00000-0xf7afffff]
348[ 0.190799] NET: Registered protocol family 2
349[ 0.190916] tcp_listen_portaddr_hash hash table entries: 2048 (order: 3, 32768 bytes)
350[ 0.190929] TCP established hash table entries: 32768 (order: 6, 262144 bytes)
351[ 0.190984] TCP bind hash table entries: 32768 (order: 7, 524288 bytes)
352[ 0.191084] TCP: Hash tables configured (established 32768 bind 32768)
353[ 0.191110] UDP hash table entries: 2048 (order: 4, 65536 bytes)
354[ 0.191125] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
355[ 0.191178] NET: Registered protocol family 1
356[ 0.191183] NET: Registered protocol family 44
357[ 0.191191] pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
358[ 0.215139] pci 0000:00:1a.0: quirk_usb_early_handoff+0x0/0x6a0 took 23200 usecs
359[ 0.239136] pci 0000:00:1d.0: quirk_usb_early_handoff+0x0/0x6a0 took 23406 usecs
360[ 0.239231] PCI: CLS 64 bytes, default 64
361[ 0.239266] Unpacking initramfs...
362[ 0.654061] Freeing initrd memory: 39376K
363[ 0.654096] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
364[ 0.654097] software IO TLB: mapped [mem 0xd3db2000-0xd7db2000] (64MB)
365[ 0.654273] check: Scanning for low memory corruption every 60 seconds
366[ 0.655557] Initialise system trusted keyrings
367[ 0.655564] Key type blacklist registered
368[ 0.655588] workingset: timestamp_bits=36 max_order=20 bucket_order=0
369[ 0.656554] zbud: loaded
370[ 0.656869] squashfs: version 4.0 (2009/01/31) Phillip Lougher
371[ 0.657001] fuse init (API version 7.28)
372[ 0.681527] Key type asymmetric registered
373[ 0.681528] Asymmetric key parser 'x509' registered
374[ 0.681540] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 243)
375[ 0.681566] io scheduler mq-deadline registered
376[ 0.682447] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
377[ 0.682499] vesafb: mode is 1366x768x32, linelength=5504, pages=0
378[ 0.682499] vesafb: scrolling: redraw
379[ 0.682500] vesafb: Truecolor: size=8:8:8:8, shift=24:16:8:0
380[ 0.682511] vesafb: framebuffer at 0xe0000000, mapped to 0x000000009513e822, using 4160k, total 4160k
381[ 0.682583] Console: switching to colour frame buffer device 170x48
382[ 0.682596] fb0: VESA VGA frame buffer device
383[ 0.682607] intel_idle: MWAIT substates: 0x42120
384[ 0.682608] intel_idle: v0.4.1 model 0x3C
385[ 0.682731] intel_idle: lapic_timer_reliable_states 0xffffffff
386[ 0.683882] ACPI: AC Adapter [AC] (off-line)
387[ 0.683952] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input0
388[ 0.683977] ACPI: Lid Switch [LID0]
389[ 0.684035] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input1
390[ 0.684071] ACPI: Power Button [PBTN]
391[ 0.684119] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input2
392[ 0.684126] ACPI: Sleep Button [SBTN]
393[ 0.684150] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
394[ 0.684170] ACPI: Power Button [PWRF]
395[ 0.685368] thermal LNXTHERM:00: registered as thermal_zone0
396[ 0.685369] ACPI: Thermal Zone [THM] (25 C)
397[ 0.685525] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
398[ 0.688391] Linux agpgart interface v0.103
399[ 0.690613] loop: module loaded
400[ 0.690833] libphy: Fixed MDIO Bus: probed
401[ 0.690834] tun: Universal TUN/TAP device driver, 1.6
402[ 0.690872] PPP generic driver version 2.4.2
403[ 0.690907] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
404[ 0.690910] ehci-pci: EHCI PCI platform driver
405[ 0.691170] ehci-pci 0000:00:1a.0: EHCI Host Controller
406[ 0.691182] ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1
407[ 0.691197] ehci-pci 0000:00:1a.0: debug port 2
408[ 0.695122] ehci-pci 0000:00:1a.0: cache line size of 64 is not supported
409[ 0.695139] ehci-pci 0000:00:1a.0: irq 16, io mem 0xf7c3c000
410[ 0.710993] battery: ACPI: Battery Slot [BAT0] (battery present)
411[ 0.711053] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00
412[ 0.711103] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.00
413[ 0.711105] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
414[ 0.711107] usb usb1: Product: EHCI Host Controller
415[ 0.711108] usb usb1: Manufacturer: Linux 5.0.0-27-generic ehci_hcd
416[ 0.711110] usb usb1: SerialNumber: 0000:00:1a.0
417[ 0.711317] hub 1-0:1.0: USB hub found
418[ 0.711322] hub 1-0:1.0: 2 ports detected
419[ 0.712092] ehci-pci 0000:00:1d.0: EHCI Host Controller
420[ 0.712096] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 2
421[ 0.712110] ehci-pci 0000:00:1d.0: debug port 2
422[ 0.712641] battery: ACPI: Battery Slot [BAT1] (battery absent)
423[ 0.716021] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported
424[ 0.716029] ehci-pci 0000:00:1d.0: irq 21, io mem 0xf7c3b000
425[ 0.735085] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
426[ 0.735137] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.00
427[ 0.735138] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
428[ 0.735139] usb usb2: Product: EHCI Host Controller
429[ 0.735140] usb usb2: Manufacturer: Linux 5.0.0-27-generic ehci_hcd
430[ 0.735140] usb usb2: SerialNumber: 0000:00:1d.0
431[ 0.735253] hub 2-0:1.0: USB hub found
432[ 0.735256] hub 2-0:1.0: 2 ports detected
433[ 0.735394] ehci-platform: EHCI generic platform driver
434[ 0.735411] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
435[ 0.735413] ohci-pci: OHCI PCI platform driver
436[ 0.735422] ohci-platform: OHCI generic platform driver
437[ 0.735428] uhci_hcd: USB Universal Host Controller Interface driver
438[ 0.735571] xhci_hcd 0000:00:14.0: xHCI Host Controller
439[ 0.735575] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 3
440[ 0.736631] xhci_hcd 0000:00:14.0: hcc params 0x200077c1 hci version 0x100 quirks 0x0000000000009810
441[ 0.736634] xhci_hcd 0000:00:14.0: cache line size of 64 is not supported
442[ 0.736773] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.00
443[ 0.736774] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
444[ 0.736775] usb usb3: Product: xHCI Host Controller
445[ 0.736775] usb usb3: Manufacturer: Linux 5.0.0-27-generic xhci-hcd
446[ 0.736776] usb usb3: SerialNumber: 0000:00:14.0
447[ 0.736865] hub 3-0:1.0: USB hub found
448[ 0.736885] hub 3-0:1.0: 15 ports detected
449[ 0.739736] xhci_hcd 0000:00:14.0: xHCI Host Controller
450[ 0.739738] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 4
451[ 0.739740] xhci_hcd 0000:00:14.0: Host supports USB 3.0 SuperSpeed
452[ 0.739769] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.00
453[ 0.739770] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
454[ 0.739771] usb usb4: Product: xHCI Host Controller
455[ 0.739771] usb usb4: Manufacturer: Linux 5.0.0-27-generic xhci-hcd
456[ 0.739772] usb usb4: SerialNumber: 0000:00:14.0
457[ 0.739927] hub 4-0:1.0: USB hub found
458[ 0.739942] hub 4-0:1.0: 6 ports detected
459[ 0.740501] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
460[ 0.741090] i8042: Warning: Keylock active
461[ 0.743458] serio: i8042 KBD port at 0x60,0x64 irq 1
462[ 0.743461] serio: i8042 AUX port at 0x60,0x64 irq 12
463[ 0.743702] mousedev: PS/2 mouse device common for all mice
464[ 0.744040] rtc_cmos 00:02: RTC can wake from S4
465[ 0.744166] rtc_cmos 00:02: registered as rtc0
466[ 0.744176] rtc_cmos 00:02: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
467[ 0.744182] i2c /dev entries driver
468[ 0.744244] device-mapper: uevent: version 1.0.3
469[ 0.744295] device-mapper: ioctl: 4.39.0-ioctl (2018-04-03) initialised: dm-devel@redhat.com
470[ 0.744315] platform eisa.0: Probing EISA bus 0
471[ 0.744316] platform eisa.0: EISA: Cannot allocate resource for mainboard
472[ 0.744318] platform eisa.0: Cannot allocate resource for EISA slot 1
473[ 0.744318] platform eisa.0: Cannot allocate resource for EISA slot 2
474[ 0.744319] platform eisa.0: Cannot allocate resource for EISA slot 3
475[ 0.744319] platform eisa.0: Cannot allocate resource for EISA slot 4
476[ 0.744320] platform eisa.0: Cannot allocate resource for EISA slot 5
477[ 0.744321] platform eisa.0: Cannot allocate resource for EISA slot 6
478[ 0.744321] platform eisa.0: Cannot allocate resource for EISA slot 7
479[ 0.744322] platform eisa.0: Cannot allocate resource for EISA slot 8
480[ 0.744323] platform eisa.0: EISA: Detected 0 cards
481[ 0.744327] intel_pstate: Intel P-state driver initializing
482[ 0.744407] ledtrig-cpu: registered to indicate activity on CPUs
483[ 0.744579] NET: Registered protocol family 10
484[ 0.745345] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input4
485[ 0.748986] Segment Routing with IPv6
486[ 0.749012] NET: Registered protocol family 17
487[ 0.749049] Key type dns_resolver registered
488[ 0.749270] mce: Using 7 MCE banks
489[ 0.749279] RAS: Correctable Errors collector initialized.
490[ 0.749300] microcode: sig=0x306c3, pf=0x10, revision=0x27
491[ 0.749332] microcode: Microcode Update Driver: v2.2.
492[ 0.749341] sched_clock: Marking stable (749081663, 247648)->(757157231, -7827920)
493[ 0.749494] registered taskstats version 1
494[ 0.749501] Loading compiled-in X.509 certificates
495[ 0.750891] Loaded X.509 cert 'Build time autogenerated kernel key: 44048b015ce66fb3392e6cd278855a5859c60678'
496[ 0.750906] zswap: loaded using pool lzo/zbud
497[ 0.754744] Key type big_key registered
498[ 0.754747] Key type trusted registered
499[ 0.756478] Key type encrypted registered
500[ 0.756480] AppArmor: AppArmor sha1 policy hashing enabled
501[ 0.756484] ima: No TPM chip found, activating TPM-bypass!
502[ 0.756487] ima: Allocated hash algorithm: sha1
503[ 0.756501] No architecture policies found
504[ 0.756508] evm: Initialising EVM extended attributes:
505[ 0.756508] evm: security.selinux
506[ 0.756509] evm: security.SMACK64
507[ 0.756509] evm: security.SMACK64EXEC
508[ 0.756509] evm: security.SMACK64TRANSMUTE
509[ 0.756510] evm: security.SMACK64MMAP
510[ 0.756510] evm: security.apparmor
511[ 0.756510] evm: security.ima
512[ 0.756510] evm: security.capability
513[ 0.756511] evm: HMAC attrs: 0x1
514[ 0.757135] Magic number: 3:650:133
515[ 0.757202] acpi device:08: hash matches
516[ 0.757263] rtc_cmos 00:02: setting system clock to 2019-09-13T15:08:03 UTC (1568387283)
517[ 0.758247] Freeing unused decrypted memory: 2040K
518[ 0.758619] Freeing unused kernel image memory: 2584K
519[ 0.783108] Write protecting the kernel read-only data: 22528k
520[ 0.783522] Freeing unused kernel image memory: 2016K
521[ 0.783789] Freeing unused kernel image memory: 1828K
522[ 0.791900] x86/mm: Checked W+X mappings: passed, no W+X pages found.
523[ 0.791901] x86/mm: Checking user space page tables
524[ 0.799557] x86/mm: Checked W+X mappings: passed, no W+X pages found.
525[ 0.799559] Run /init as init process
526[ 0.877359] wmi_bus wmi_bus-PNP0C14:00: WQBC data block query control method not found
527[ 0.880572] sdhci: Secure Digital Host Controller Interface driver
528[ 0.880573] sdhci: Copyright(c) Pierre Ossman
529[ 0.881391] ahci 0000:00:1f.2: version 3.0
530[ 0.881573] ahci 0000:00:1f.2: SSS flag set, parallel bus scan disabled
531[ 0.881595] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 5 ports 6 Gbps 0x7 impl RAID mode
532[ 0.881596] ahci 0000:00:1f.2: flags: 64bit ncq ilck stag pm led clo pio slum part ems sxs apst
533[ 0.883050] e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k
534[ 0.883051] e1000e: Copyright(c) 1999 - 2015 Intel Corporation.
535[ 0.883237] e1000e 0000:00:19.0: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode
536[ 0.884058] sdhci-pci 0000:0e:00.0: SDHCI controller found [1217:8520] (rev 1)
537[ 0.884676] mmc0: SDHCI controller on PCI [0000:0e:00.0] using ADMA
538[ 0.903713] scsi host0: ahci
539[ 0.903854] scsi host1: ahci
540[ 0.903975] scsi host2: ahci
541[ 0.904078] scsi host3: ahci
542[ 0.904169] scsi host4: ahci
543[ 0.904223] ata1: SATA max UDMA/133 abar m2048@0xf7c3a000 port 0xf7c3a100 irq 25
544[ 0.904225] ata2: SATA max UDMA/133 abar m2048@0xf7c3a000 port 0xf7c3a180 irq 25
545[ 0.904227] ata3: SATA max UDMA/133 abar m2048@0xf7c3a000 port 0xf7c3a200 irq 25
546[ 0.904228] ata4: DUMMY
547[ 0.904228] ata5: DUMMY
548[ 0.972232] e1000e 0000:00:19.0 0000:00:19.0 (uninitialized): registered PHC clock
549[ 1.047089] usb 1-1: new high-speed USB device number 2 using ehci-pci
550[ 1.051351] e1000e 0000:00:19.0 eth0: (PCI Express:2.5GT/s:Width x1) 20:47:47:ea:e9:f5
551[ 1.051353] e1000e 0000:00:19.0 eth0: Intel(R) PRO/1000 Network Connection
552[ 1.051394] e1000e 0000:00:19.0 eth0: MAC: 11, PHY: 12, PBA No: FFFFFF-0FF
553[ 1.052178] e1000e 0000:00:19.0 eno1: renamed from eth0
554[ 1.071105] usb 2-1: new high-speed USB device number 2 using ehci-pci
555[ 1.079103] usb 3-6: new full-speed USB device number 2 using xhci_hcd
556[ 1.203420] usb 1-1: New USB device found, idVendor=8087, idProduct=8008, bcdDevice= 0.04
557[ 1.203422] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
558[ 1.203698] hub 1-1:1.0: USB hub found
559[ 1.203788] hub 1-1:1.0: 6 ports detected
560[ 1.223872] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
561[ 1.224682] ata1.00: ATA-9: WDC WD5000LPVX-80V0TT0, 01.01A01, max UDMA/133
562[ 1.224684] ata1.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 32), AA
563[ 1.225646] ata1.00: configured for UDMA/133
564[ 1.225810] scsi 0:0:0:0: Direct-Access ATA WDC WD5000LPVX-8 1A01 PQ: 0 ANSI: 5
565[ 1.225992] sd 0:0:0:0: Attached scsi generic sg0 type 0
566[ 1.226003] sd 0:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/466 GiB)
567[ 1.226004] sd 0:0:0:0: [sda] 4096-byte physical blocks
568[ 1.226016] sd 0:0:0:0: [sda] Write Protect is off
569[ 1.226018] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
570[ 1.226039] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
571[ 1.227458] usb 2-1: New USB device found, idVendor=8087, idProduct=8000, bcdDevice= 0.04
572[ 1.227469] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
573[ 1.228105] hub 2-1:1.0: USB hub found
574[ 1.228303] hub 2-1:1.0: 8 ports detected
575[ 1.229203] usb 3-6: New USB device found, idVendor=062a, idProduct=4102, bcdDevice= 1.10
576[ 1.229205] usb 3-6: New USB device strings: Mfr=1, Product=2, SerialNumber=0
577[ 1.229206] usb 3-6: Product: 2.4G Wireless Mouse
578[ 1.229207] usb 3-6: Manufacturer: MOSART Semi.
579[ 1.232133] hidraw: raw HID events driver (C) Jiri Kosina
580[ 1.234725] usbcore: registered new interface driver usbhid
581[ 1.234726] usbhid: USB HID core driver
582[ 1.236323] input: MOSART Semi. 2.4G Wireless Mouse as /devices/pci0000:00/0000:00:14.0/usb3/3-6/3-6:1.0/0003:062A:4102.0001/input/input7
583[ 1.236423] input: MOSART Semi. 2.4G Wireless Mouse as /devices/pci0000:00/0000:00:14.0/usb3/3-6/3-6:1.0/0003:062A:4102.0001/input/input8
584[ 1.236518] hid-generic 0003:062A:4102.0001: input,hiddev0,hidraw0: USB HID v1.10 Mouse [MOSART Semi. 2.4G Wireless Mouse] on usb-0000:00:14.0-6/input0
585[ 1.316364] sda: sda1 sda2 < sda5 sda6 sda7 sda8 >
586[ 1.316993] sd 0:0:0:0: [sda] Attached SCSI disk
587[ 1.491097] usb 1-1.5: new high-speed USB device number 3 using ehci-pci
588[ 1.515096] usb 2-1.8: new full-speed USB device number 3 using ehci-pci
589[ 1.542155] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
590[ 1.544984] ata2.00: ATAPI: HL-DT-ST DVD+/-RW GU90N, A1B0, max UDMA/100
591[ 1.549851] ata2.00: configured for UDMA/100
592[ 1.554995] scsi 1:0:0:0: CD-ROM HL-DT-ST DVD+-RW GU90N A1B0 PQ: 0 ANSI: 5
593[ 1.614655] sr 1:0:0:0: [sr0] scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
594[ 1.614657] cdrom: Uniform CD-ROM driver Revision: 3.20
595[ 1.614905] sr 1:0:0:0: Attached scsi CD-ROM sr0
596[ 1.614987] sr 1:0:0:0: Attached scsi generic sg1 type 5
597[ 1.638588] usb 1-1.5: New USB device found, idVendor=093a, idProduct=7352, bcdDevice=52.2a
598[ 1.638590] usb 1-1.5: New USB device strings: Mfr=1, Product=2, SerialNumber=0
599[ 1.638591] usb 1-1.5: Product: USB_2.0_Webcam
600[ 1.638592] usb 1-1.5: Manufacturer: PixArt Imaging Inc.
601[ 1.646037] usb 2-1.8: New USB device found, idVendor=0a5c, idProduct=5800, bcdDevice= 1.01
602[ 1.646039] usb 2-1.8: New USB device strings: Mfr=1, Product=2, SerialNumber=3
603[ 1.646041] usb 2-1.8: Product: 5880
604[ 1.646042] usb 2-1.8: Manufacturer: Broadcom Corp
605[ 1.646044] usb 2-1.8: SerialNumber: 0123456789ABCD
606[ 1.646132] usb 2-1.8: config 0 descriptor??
607[ 1.675104] tsc: Refined TSC clocksource calibration: 2593.978 MHz
608[ 1.675113] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x25640325080, max_idle_ns: 440795224202 ns
609[ 1.675132] clocksource: Switched to clocksource tsc
610[ 1.930207] ata3: SATA link down (SStatus 0 SControl 300)
611[ 2.224382] input: AlpsPS/2 ALPS DualPoint Stick as /devices/platform/i8042/serio1/input/input9
612[ 2.236411] input: AlpsPS/2 ALPS DualPoint TouchPad as /devices/platform/i8042/serio1/input/input6
613[ 3.167262] EXT4-fs (sda5): mounted filesystem with ordered data mode. Opts: (null)
614[ 3.643549] EXT4-fs (sda7): mounted filesystem with ordered data mode. Opts: (null)
615[ 5.045763] systemd[1]: systemd 237 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN2 +IDN -PCRE2 default-hierarchy=hybrid)
616[ 5.063261] systemd[1]: Detected architecture x86-64.
617[ 5.076407] systemd[1]: Set hostname to <Red-Ex>.
618[ 7.137737] systemd[1]: Unnecessary job for WDC_WD5000LPVX-80V0TT0 7 was removed.
619[ 7.137924] systemd[1]: Reached target Remote File Systems.
620[ 7.138135] systemd[1]: Created slice User and Session Slice.
621[ 7.138189] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
622[ 7.138308] systemd[1]: Created slice System Slice.
623[ 7.138366] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
624[ 7.138471] systemd[1]: Created slice system-systemd\x2dfsck.slice.
625[ 7.478237] EXT4-fs (sda7): re-mounted. Opts: (null)
626[ 7.478248] EXT4-fs (sda5): re-mounted. Opts: errors=remount-ro
627[ 7.697765] lp: driver loaded but no devices found
628[ 7.822397] systemd-journald[330]: Received request to flush runtime journal from PID 1
629[ 7.882291] ppdev: user-space parallel port driver
630[ 7.912545] parport_pc 00:07: [io 0x0378-0x037b]
631[ 7.912664] parport_pc 00:07: [irq 5]
632[ 7.913933] parport_pc 00:07: activated
633[ 7.913935] parport_pc 00:07: reported by Plug and Play ACPI
634[ 12.537772] EDAC ie31200: No ECC support
635[ 12.717053] ACPI Warning: SystemIO range 0x0000000000001828-0x000000000000182F conflicts with OpRegion 0x0000000000001800-0x000000000000183F (\_SB.PCI0.EHC2.E1PM) (20181213/utaddress-213)
636[ 12.717058] ACPI Warning: SystemIO range 0x0000000000001828-0x000000000000182F conflicts with OpRegion 0x0000000000001800-0x000000000000183F (\_SB.PCI0.EHC1.E1PM) (20181213/utaddress-213)
637[ 12.717060] ACPI Warning: SystemIO range 0x0000000000001828-0x000000000000182F conflicts with OpRegion 0x0000000000001800-0x000000000000187F (\PMIO) (20181213/utaddress-213)
638[ 12.717062] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
639[ 12.717070] ACPI Warning: SystemIO range 0x0000000000001C40-0x0000000000001C4F conflicts with OpRegion 0x0000000000001C00-0x0000000000001FFF (\GPR) (20181213/utaddress-213)
640[ 12.717071] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
641[ 12.717072] ACPI Warning: SystemIO range 0x0000000000001C30-0x0000000000001C3F conflicts with OpRegion 0x0000000000001C00-0x0000000000001C3F (\GPRL) (20181213/utaddress-213)
642[ 12.717074] ACPI Warning: SystemIO range 0x0000000000001C30-0x0000000000001C3F conflicts with OpRegion 0x0000000000001C00-0x0000000000001FFF (\GPR) (20181213/utaddress-213)
643[ 12.717076] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
644[ 12.717076] ACPI Warning: SystemIO range 0x0000000000001C00-0x0000000000001C2F conflicts with OpRegion 0x0000000000001C00-0x0000000000001C3F (\GPRL) (20181213/utaddress-213)
645[ 12.717078] ACPI Warning: SystemIO range 0x0000000000001C00-0x0000000000001C2F conflicts with OpRegion 0x0000000000001C00-0x0000000000001FFF (\GPR) (20181213/utaddress-213)
646[ 12.717080] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
647[ 12.717080] lpc_ich: Resource conflict(s) found affecting gpio_ich
648[ 12.769476] cfg80211: Loading compiled-in X.509 certificates for regulatory database
649[ 12.770853] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
650[ 13.102040] dcdbas dcdbas: Dell Systems Management Base Driver (version 5.6.0-3.3)
651[ 13.372980] VFIO - User Level meta-driver version: 0.3
652[ 13.390754] input: Dell WMI hotkeys as /devices/platform/PNP0C14:00/wmi_bus/wmi_bus-PNP0C14:00/9DBB5994-A997-11DA-B012-B622A1EF5492/input/input10
653[ 13.417449] snd_hda_codec_realtek hdaudioC1D0: autoconfig for ALC3226: line_outs=1 (0x16/0x0/0x0/0x0/0x0) type:line
654[ 13.417451] snd_hda_codec_realtek hdaudioC1D0: speaker_outs=1 (0x14/0x0/0x0/0x0/0x0)
655[ 13.417453] snd_hda_codec_realtek hdaudioC1D0: hp_outs=1 (0x15/0x0/0x0/0x0/0x0)
656[ 13.417454] snd_hda_codec_realtek hdaudioC1D0: mono: mono_out=0x0
657[ 13.417456] snd_hda_codec_realtek hdaudioC1D0: inputs:
658[ 13.417457] snd_hda_codec_realtek hdaudioC1D0: Dock Mic=0x19
659[ 13.417459] snd_hda_codec_realtek hdaudioC1D0: Headset Mic=0x1a
660[ 13.417460] snd_hda_codec_realtek hdaudioC1D0: Internal Mic=0x12
661[ 13.438151] ath: phy0: Enable LNA combining
662[ 13.439395] ath: phy0: ASPM enabled: 0x43
663[ 13.439397] ath: EEPROM regdomain: 0x60
664[ 13.439398] ath: EEPROM indicates we should expect a direct regpair map
665[ 13.439399] ath: Country alpha2 being used: 00
666[ 13.439400] ath: Regpair used: 0x60
667[ 13.463630] input: HDA Intel PCH Dock Mic as /devices/pci0000:00/0000:00:1b.0/sound/card1/input11
668[ 13.463672] input: HDA Intel PCH Dock Line Out as /devices/pci0000:00/0000:00:1b.0/sound/card1/input12
669[ 13.463706] input: HDA Intel PCH Front Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card1/input13
670[ 13.642230] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
671[ 13.642612] ieee80211 phy0: Atheros AR9485 Rev:1 mem=0xffffacec80d00000, irq=18
672[ 13.659956] RAPL PMU: API unit is 2^-32 Joules, 4 fixed counters, 655360 ms ovfl timer
673[ 13.659958] RAPL PMU: hw unit of domain pp0-core 2^-14 Joules
674[ 13.659958] RAPL PMU: hw unit of domain package 2^-14 Joules
675[ 13.659959] RAPL PMU: hw unit of domain dram 2^-14 Joules
676[ 13.659960] RAPL PMU: hw unit of domain pp1-gpu 2^-14 Joules
677[ 13.744237] dell_laptop: Using dell-rbtn acpi driver for receiving events
678[ 13.769384] checking generic (e0000000 410000) vs hw (e0000000 10000000)
679[ 13.769386] fb0: switching to inteldrmfb from VESA VGA
680[ 13.769401] Console: switching to colour dummy device 80x25
681[ 13.769476] [drm] Replacing VGA console driver
682[ 13.770277] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
683[ 13.770277] [drm] Driver supports precise vblank timestamp query.
684[ 13.770480] i915 0000:00:02.0: vgaarb: changed VGA decodes: olddecodes=io+mem,decodes=io+mem:owns=io+mem
685[ 13.793993] [drm] Initialized i915 1.6.0 20181204 for 0000:00:02.0 on minor 0
686[ 13.797322] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no)
687[ 13.797889] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input14
688[ 13.798676] snd_hda_intel 0000:00:03.0: Linked as a consumer to 0000:00:02.0
689[ 13.798734] snd_hda_intel 0000:00:03.0: bound 0000:00:02.0 (ops i915_audio_component_bind_ops [i915])
690[ 13.799489] pci_bus 0000:02: Allocating resources
691[ 13.799504] pci_bus 0000:03: Allocating resources
692[ 13.799521] pcieport 0000:00:1c.2: bridge window [io 0x1000-0x0fff] to [bus 03] add_size 1000
693[ 13.799524] pcieport 0000:00:1c.2: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 03] add_size 200000 add_align 100000
694[ 13.799533] pci_bus 0000:04: Allocating resources
695[ 13.799547] pci_bus 0000:05: Allocating resources
696[ 13.799562] pci_bus 0000:06: Allocating resources
697[ 13.799581] pci_bus 0000:0e: Allocating resources
698[ 13.799665] pcieport 0000:00:1c.7: bridge window [io 0x1000-0x0fff] to [bus 0e] add_size 1000
699[ 13.799668] pcieport 0000:00:1c.7: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 0e] add_size 200000 add_align 100000
700[ 13.799682] pcieport 0000:00:1c.2: BAR 15: assigned [mem 0xdf600000-0xdf7fffff 64bit pref]
701[ 13.799688] pcieport 0000:00:1c.7: BAR 15: assigned [mem 0xdf800000-0xdf9fffff 64bit pref]
702[ 13.799692] pcieport 0000:00:1c.2: BAR 13: assigned [io 0x3000-0x3fff]
703[ 13.799694] pcieport 0000:00:1c.7: BAR 13: assigned [io 0x4000-0x4fff]
704[ 13.800620] acpi device:41: Cannot transition to power state D3hot for parent in (unknown)
705[ 13.814921] fbcon: inteldrmfb (fb0) is primary device
706[ 13.814959] Console: switching to colour frame buffer device 170x48
707[ 13.814974] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
708[ 13.819193] pci_bus 0000:01: Allocating resources
709[ 13.819200] pcieport 0000:00:01.0: bridge window [io 0x1000-0x0fff] to [bus 01] add_size 1000
710[ 13.819202] pcieport 0000:00:01.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 01] add_size 200000 add_align 100000
711[ 13.819203] pcieport 0000:00:01.0: bridge window [mem 0x00100000-0x000fffff] to [bus 01] add_size 200000 add_align 100000
712[ 13.819213] pcieport 0000:00:01.0: BAR 14: assigned [mem 0xdfa00000-0xdfbfffff]
713[ 13.819218] pcieport 0000:00:01.0: BAR 15: assigned [mem 0xdfc00000-0xdfdfffff 64bit pref]
714[ 13.819221] pcieport 0000:00:01.0: BAR 13: assigned [io 0x5000-0x5fff]
715[ 13.873819] ath9k 0000:03:00.0 wlp3s0: renamed from wlan0
716[ 13.884868] cryptd: max_cpu_qlen set to 1000
717[ 13.902133] input: HDA Intel HDMI HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:03.0/sound/card0/input15
718[ 13.902193] input: HDA Intel HDMI HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:03.0/sound/card0/input16
719[ 13.902244] input: HDA Intel HDMI HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:03.0/sound/card0/input17
720[ 13.902292] input: HDA Intel HDMI HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:03.0/sound/card0/input18
721[ 13.902337] input: HDA Intel HDMI HDMI/DP,pcm=10 as /devices/pci0000:00/0000:00:03.0/sound/card0/input19
722[ 14.248946] media: Linux media interface: v0.10
723[ 14.265686] AVX2 version of gcm_enc/dec engaged.
724[ 14.265688] AES CTR mode by8 optimization enabled
725[ 14.390691] videodev: Linux video capture interface: v2.00
726[ 14.593799] uvcvideo: Found UVC 1.00 device USB_2.0_Webcam (093a:7352)
727[ 14.613722] uvcvideo 1-1.5:1.0: Entity type for entity Extension 4 was not initialized!
728[ 14.613724] uvcvideo 1-1.5:1.0: Entity type for entity Processing 3 was not initialized!
729[ 14.613725] uvcvideo 1-1.5:1.0: Entity type for entity Camera 1 was not initialized!
730[ 14.613780] input: USB_2.0_Webcam: USB_2.0_Webcam as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.5/1-1.5:1.0/input/input20
731[ 14.613838] usbcore: registered new interface driver uvcvideo
732[ 14.613838] USB Video Class driver (1.1.1)
733[ 14.715342] intel_rapl: Found RAPL domain package
734[ 14.715343] intel_rapl: Found RAPL domain core
735[ 14.715344] intel_rapl: Found RAPL domain uncore
736[ 14.715345] intel_rapl: Found RAPL domain dram
737[ 14.715346] intel_rapl: RAPL package 0 domain package locked by BIOS
738[ 14.715350] intel_rapl: RAPL package 0 domain dram locked by BIOS
739[ 16.959108] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
740[ 17.654615] Adding 15623164k swap on /dev/sda8. Priority:-2 extents:1 across:15623164k FS
741[ 19.409552] EXT4-fs (sda6): mounted filesystem with ordered data mode. Opts: (null)
742[ 20.661888] audit: type=1400 audit(1568387303.397:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/man" pid=597 comm="apparmor_parser"
743[ 20.661892] audit: type=1400 audit(1568387303.397:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="man_filter" pid=597 comm="apparmor_parser"
744[ 20.661894] audit: type=1400 audit(1568387303.397:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="man_groff" pid=597 comm="apparmor_parser"
745[ 20.662926] audit: type=1400 audit(1568387303.397:5): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/sbin/dhclient" pid=594 comm="apparmor_parser"
746[ 20.662929] audit: type=1400 audit(1568387303.397:6): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=594 comm="apparmor_parser"
747[ 20.662931] audit: type=1400 audit(1568387303.397:7): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-helper" pid=594 comm="apparmor_parser"
748[ 20.662933] audit: type=1400 audit(1568387303.397:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=594 comm="apparmor_parser"
749[ 20.663337] audit: type=1400 audit(1568387303.397:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/lightdm/lightdm-guest-session" pid=593 comm="apparmor_parser"
750[ 20.663340] audit: type=1400 audit(1568387303.397:10): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/lightdm/lightdm-guest-session//chromium" pid=593 comm="apparmor_parser"
751[ 20.664684] audit: type=1400 audit(1568387303.401:11): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/tcpdump" pid=600 comm="apparmor_parser"
752[ 28.922314] wlp3s0: authenticate with e8:94:f6:44:b8:76
753[ 28.937027] wlp3s0: send auth to e8:94:f6:44:b8:76 (try 1/3)
754[ 28.939433] wlp3s0: authenticated
755[ 28.943082] wlp3s0: associate with e8:94:f6:44:b8:76 (try 1/3)
756[ 28.947370] wlp3s0: RX AssocResp from e8:94:f6:44:b8:76 (capab=0x431 status=0 aid=2)
757[ 28.947514] wlp3s0: associated
758[ 28.947680] ath: EEPROM regdomain: 0x8348
759[ 28.947681] ath: EEPROM indicates we should expect a country code
760[ 28.947682] ath: doing EEPROM country->regdmn map search
761[ 28.947684] ath: country maps to regdmn code: 0x3a
762[ 28.947684] ath: Country alpha2 being used: US
763[ 28.947685] ath: Regpair used: 0x3a
764[ 28.947686] ath: regdomain 0x8348 dynamically updated by country element
765[ 28.970991] IPv6: ADDRCONF(NETDEV_CHANGE): wlp3s0: link becomes ready
766[ 5886.000208] wlp3s0: authenticate with e8:94:f6:44:b8:76
767[ 5886.014953] wlp3s0: send auth to e8:94:f6:44:b8:76 (try 1/3)
768[ 5886.017300] wlp3s0: authenticated
769[ 5886.025371] wlp3s0: associate with e8:94:f6:44:b8:76 (try 1/3)
770[ 5886.030498] wlp3s0: RX AssocResp from e8:94:f6:44:b8:76 (capab=0x431 status=0 aid=1)
771[ 5886.030628] wlp3s0: associated
772[ 5886.030708] ath: EEPROM regdomain: 0x8348
773[ 5886.030709] ath: EEPROM indicates we should expect a country code
774[ 5886.030710] ath: doing EEPROM country->regdmn map search
775[ 5886.030711] ath: country maps to regdmn code: 0x3a
776[ 5886.030711] ath: Country alpha2 being used: US
777[ 5886.030712] ath: Regpair used: 0x3a
778[ 5886.030713] ath: regdomain 0x8348 dynamically updated by country element
779[ 5886.038736] IPv6: ADDRCONF(NETDEV_CHANGE): wlp3s0: link becomes ready
780[ 8296.677772] usb 3-2: new low-speed USB device number 3 using xhci_hcd
781[ 8296.832230] usb 3-2: New USB device found, idVendor=413c, idProduct=2113, bcdDevice= 1.08
782[ 8296.832236] usb 3-2: New USB device strings: Mfr=0, Product=2, SerialNumber=0
783[ 8296.832240] usb 3-2: Product: Dell KB216 Wired Keyboard
784[ 8296.839310] input: Dell KB216 Wired Keyboard as /devices/pci0000:00/0000:00:14.0/usb3/3-2/3-2:1.0/0003:413C:2113.0002/input/input21
785[ 8296.898452] hid-generic 0003:413C:2113.0002: input,hidraw1: USB HID v1.11 Keyboard [Dell KB216 Wired Keyboard] on usb-0000:00:14.0-2/input0
786[ 8296.903459] input: Dell KB216 Wired Keyboard System Control as /devices/pci0000:00/0000:00:14.0/usb3/3-2/3-2:1.1/0003:413C:2113.0003/input/input22
787[ 8296.962215] input: Dell KB216 Wired Keyboard Consumer Control as /devices/pci0000:00/0000:00:14.0/usb3/3-2/3-2:1.1/0003:413C:2113.0003/input/input23
788[ 8296.962525] hid-generic 0003:413C:2113.0003: input,hidraw2: USB HID v1.11 Device [Dell KB216 Wired Keyboard] on usb-0000:00:14.0-2/input1