· 6 years ago · Oct 23, 2019, 03:22 PM
1
2Format: Log Type - Time(microsec) - Message - Optional Info
3Log Type: B - Since Boot(Power On Reset), D - Delta, S - Statistic
4S - QC_IMAGE_VERSION_STRING=BOOT.BF.3.0-00288
5S - IMAGE_VARIANT_STRING=HAAAANAZA
6S - OEM_IMAGE_VERSION_STRING=CRM
7S - Boot Config, 0x000002e1
8S - Core 0 Frequency, 0 MHz
9B - 1544 - PBL, Start
10B - 3489 - bootable_media_detect_entry, Start
11B - 179176 - bootable_media_detect_success, Start
12B - 179180 - elf_loader_entry, Start
13B - 181489 - auth_hash_seg_entry, Start
14B - 181698 - auth_hash_seg_exit, Start
15B - 198760 - elf_segs_hash_verify_entry, Start
16B - 258989 - PBL, End
17B - 266265 - SBL1, Start
18B - 329217 - pm_device_init, Start
19D - 14731 - pm_device_init, Delta
20B - 344345 - boot_flash_init, Start
21D - 30 - boot_flash_init, Delta
22B - 348371 - boot_config_data_table_init, Start
23D - 57828 - boot_config_data_table_init, Delta - (452 Bytes)
24B - 410774 - CDT version:3,Platform ID:24,Major ID:1,Minor ID:0,Subtype:0
25B - 416996 - sbl1_ddr_set_params, Start
26B - 420808 - cpr_init, Start
27D - 0 - cpr_init, Delta
28B - 426420 - Pre_DDR_clock_init, Start
29D - 183 - Pre_DDR_clock_init, Delta
30D - 0 - sbl1_ddr_set_params, Delta
31B - 439017 - pm_driver_init, Start
32D - 3477 - pm_driver_init, Delta
33B - 451095 - SBC platform detected: XO_ADJ_FINE = 0x20
34B - 451125 - clock_init, Start
35D - 30 - clock_init, Delta
36B - 466040 - Image Load, Start
37D - 33458 - QSEE Image Loaded, Delta - (571664 Bytes)
38B - 499529 - Image Load, Start
39D - 396 - SEC Image Loaded, Delta - (2048 Bytes)
40B - 506757 - sbl1_efs_handle_cookies, Start
41D - 61 - sbl1_efs_handle_cookies, Delta
42B - 514535 - Image Load, Start
43D - 20099 - QHEE Image Loaded, Delta - (56048 Bytes)
44B - 534665 - Image Load, Start
45D - 14975 - RPM Image Loaded, Delta - (149316 Bytes)
46B - 549671 - Image Load, Start
47D - 14884 - APPSBL Image Loaded, Delta - (519844 Bytes)
48B - 564585 - QSEE Execution, Start
49D - 61 - QSEE Execution, Delta
50B - 570289 - SBL1, End
51D - 306372 - SBL1, Delta
52S - Flash Throughput, 114000 KB/s (1299372 Bytes, 11346 us)
53S - DDR Frequency, 400 MHz
54Android Bootloader - UART_DM Initialized!!!
55[0] [0] BUILD_VERSION=dragonboard410c-LA_BR_1_2_7-03810-8x16_0-linaro2
56[0] [0] BUILD_DATE=15:12:10 - Jan 5 2019
57[0] [0] welcome to lk
58
59[10] [10] platform_init()
60[10] [10] target_init()
61[50] [50] SDHC Running in HS200 mode
62[70] [70] Done initialization of the card
63[80] [80] pm8x41_get_is_cold_boot: cold boot
64[100] [100] Neither 'config' nor 'frp' partition found
65[100] [100] Not able to search the panel:
66[110] [110] Display not enabled for 24 HW type
67[110] [110] Target panel init not found!
68[110] [110] pm8x41_get_is_cold_boot: cold boot
69[120] [120] partition misc doesn't exist
70[120] [120] error in emmc_recovery_init
71[120] [120] Unable to locate /bootselect partition
72[130] [130] No 'misc' partition found
73[130] [130] Error reading MISC partition
74[140] [140] failed to get ffbm cookie[140] [140] Loading boot image (12666880): start
75[230] [230] Loading boot image (12666880): done
76[240] [240] use_signed_kernel=0, is_unlocked=0, is_tampered=0.
77[690] [690] qcom,msm-id entry not found
78[690] [690] Only one appended non-skales DTB, select it.
79[700] [700] target_display_panel_node:510: hw_id=24 panel_name=""
80[710] [710] cmdline: root=/dev/disk/by-partlabel/rootfs rw rootwait console=ttyM SM0,115200n8 androidboot.emmc=true androidboot.serialno=332d3c28 androidboot.bas eband=apq mdss_mdp.panel=0:dsi:0:
81[720] [720] Updating device tree: start
82[810] [810] Setting WLAN mac address in DT: 02:00:33:2D:3C:28
83[830] [830] Setting Bluetooth BD address in DT: 02:00:33:2D:3C:29
84[840] [840] Setting BT mac address in DT: 02:00:33:2D:3C:29
85[850] [850] Updating device tree: done
86[850] [850] booting linux @ 0x80080000, ramdisk @ 0x84000000 (4405050), tags/dev ice tree @ 0x83e00000
87[860] [860] Jumping to kernel via monitor
88[ 0.000000] Booting Linux on physical CPU 0x0
89[ 0.000000] Linux version 4.14.0-qcomlt-arm64 (ju@ju-All-Series) (gcc version 7.2.1 20171011 (Linaro GCC 7.2-2017.11)) #1 SMP PREEMPT Fri Oct 18 12:37:42 CES T 2019
90[ 0.000000] Boot CPU: AArch64 Processor [410fd030]
91[ 0.000000] Machine model: Qualcomm Technologies, Inc. APQ 8016 SBC
92[ 0.000000] efi: Getting EFI parameters from FDT:
93[ 0.000000] efi: UEFI not found.
94[ 0.000000] cma: Reserved 16 MiB at 0x00000000bec00000
95[ 0.000000] NUMA: No NUMA configuration found
96[ 0.000000] NUMA: Faking a node at [mem 0x0000000000000000-0x00000000bfffffff ]
97[ 0.000000] NUMA: NODE_DATA [mem 0xbfe95680-0xbfe9717f]
98[ 0.000000] Zone ranges:
99[ 0.000000] DMA [mem 0x0000000080000000-0x00000000bfffffff]
100[ 0.000000] Normal empty
101[ 0.000000] Movable zone start for each node
102[ 0.000000] Early memory node ranges
103[ 0.000000] node 0: [mem 0x0000000080000000-0x0000000085ffffff]
104[ 0.000000] node 0: [mem 0x0000000089f00000-0x000000008e9fffff]
105[ 0.000000] node 0: [mem 0x000000008eb00000-0x00000000bfffffff]
106[ 0.000000] Initmem setup node 0 [mem 0x0000000080000000-0x00000000bfffffff]
107[ 0.000000] psci: probing for conduit method from DT.
108[ 0.000000] psci: PSCIv1.0 detected in firmware.
109[ 0.000000] psci: Using standard PSCI v0.2 function IDs
110[ 0.000000] psci: MIGRATE_INFO_TYPE not supported.
111[ 0.000000] psci: SMC Calling Convention v1.0
112[ 0.000000] percpu: Embedded 24 pages/cpu @ffff80003fe30000 s57496 r8192 d326 16 u98304
113[ 0.000000] Detected VIPT I-cache on CPU0
114[ 0.000000] CPU features: enabling workaround for ARM errata 826319, 827319, 824069
115[ 0.000000] CPU features: enabling workaround for ARM erratum 845719
116[ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 241920
117[ 0.000000] Policy zone: DMA
118[ 0.000000] Kernel command line: root=/dev/disk/by-partlabel/rootfs rw rootwa it console=ttyMSM0,115200n8 androidboot.emmc=true androidboot.serialno=332d3c28 androidboot.baseband=apq mdss_mdp.panel=0:dsi:0:
119[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
120[ 0.000000] Memory: 924816K/983040K available (10876K kernel code, 1568K rwda ta, 5072K rodata, 1216K init, 395K bss, 41840K reserved, 16384K cma-reserved)
121[ 0.000000] Virtual kernel memory layout:
122[ 0.000000] modules : 0xffff000000000000 - 0xffff000008000000 ( 128 M B)
123[ 0.000000] vmalloc : 0xffff000008000000 - 0xffff7dffbfff0000 (129022 G B)
124[ 0.000000] .text : 0xffff000008080000 - 0xffff000008b20000 ( 10880 K B)
125[ 0.000000] .rodata : 0xffff000008b20000 - 0xffff000009020000 ( 5120 K B)
126[ 0.000000] .init : 0xffff000009020000 - 0xffff000009150000 ( 1216 K B)
127[ 0.000000] .data : 0xffff000009150000 - 0xffff0000092d8200 ( 1569 K B)
128[ 0.000000] .bss : 0xffff0000092d8200 - 0xffff00000933af40 ( 396 K B)
129[ 0.000000] fixed : 0xffff7dfffe7f9000 - 0xffff7dfffec00000 ( 4124 K B)
130[ 0.000000] PCI I/O : 0xffff7dfffee00000 - 0xffff7dffffe00000 ( 16 M B)
131[ 0.000000] vmemmap : 0xffff7e0000000000 - 0xffff800000000000 ( 2048 G B maximum)
132[ 0.000000] 0xffff7e0000000000 - 0xffff7e0001000000 ( 16 M B actual)
133[ 0.000000] memory : 0xffff800000000000 - 0xffff800040000000 ( 1024 M B)
134[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
135[ 0.000000] Preemptible hierarchical RCU implementation.
136[ 0.000000] RCU restricting CPUs from NR_CPUS=64 to nr_cpu_ids=4.
137[ 0.000000] Tasks RCU enabled.
138[ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
139[ 0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0
140[ 0.000000] arch_timer: cp15 and mmio timer(s) running at 19.20MHz (virt/virt ).
141[ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x46d987e47, max_idle_ns: 440795202767 ns
142[ 0.000005] sched_clock: 56 bits at 19MHz, resolution 52ns, wraps every 43980 46511078ns
143[ 0.000773] Console: colour dummy device 80x25
144[ 0.000833] Calibrating delay loop (skipped), value calculated using timer fr equency.. 38.40 BogoMIPS (lpj=76800)
145[ 0.000847] pid_max: default: 32768 minimum: 301
146[ 0.000933] Security Framework initialized
147[ 0.001481] Dentry cache hash table entries: 131072 (order: 8, 1048576 bytes)
148[ 0.001756] Inode-cache hash table entries: 65536 (order: 7, 524288 bytes)
149[ 0.001788] Mount-cache hash table entries: 2048 (order: 2, 16384 bytes)
150[ 0.001805] Mountpoint-cache hash table entries: 2048 (order: 2, 16384 bytes)
151[ 0.015234] ASID allocator initialised with 32768 entries
152[ 0.023231] Hierarchical SRCU implementation.
153[ 0.036056] EFI services will not be available.
154[ 0.043984] smp: Bringing up secondary CPUs ...
155[ 0.072268] Detected VIPT I-cache on CPU1
156[ 0.072318] CPU1: Booted secondary processor [410fd030]
157[ 0.100320] Detected VIPT I-cache on CPU2
158[ 0.100359] CPU2: Booted secondary processor [410fd030]
159[ 0.128388] Detected VIPT I-cache on CPU3
160[ 0.128423] CPU3: Booted secondary processor [410fd030]
161[ 0.128503] smp: Brought up 1 node, 4 CPUs
162[ 0.128528] SMP: Total of 4 processors activated.
163[ 0.128537] CPU features: detected feature: 32-bit EL0 Support
164[ 0.128544] CPU features: detected feature: Kernel page table isolation (KPTI )
165[ 0.132350] CPU: All CPU(s) started at EL1
166[ 0.132377] alternatives: patching kernel code
167[ 0.133209] devtmpfs: initialized
168[ 0.144813] random: get_random_u32 called from bucket_table_alloc+0x108/0x258 with crng_init=0
169[ 0.145326] Registered cp15_barrier emulation handler
170[ 0.145341] Registered setend emulation handler
171[ 0.145614] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, ma x_idle_ns: 7645041785100000 ns
172[ 0.145663] futex hash table entries: 1024 (order: 5, 131072 bytes)
173[ 0.146428] pinctrl core: initialized pinctrl subsystem
174[ 0.148825] DMI not present or invalid.
175[ 0.149210] NET: Registered protocol family 16
176[ 0.151992] cpuidle: using governor menu
177[ 0.153935] vdso: 2 pages (1 code @ ffff000008b26000, 1 data @ ffff0000091550 00)
178[ 0.153954] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers.
179[ 0.155242] DMA: preallocated 256 KiB pool for atomic allocations
180[ 0.155759] Serial: AMBA PL011 UART driver
181[ 0.192135] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
182[ 0.193971] ACPI: Interpreter disabled.
183[ 0.196282] vgaarb: loaded
184[ 0.196588] SCSI subsystem initialized
185[ 0.197338] usbcore: registered new interface driver usbfs
186[ 0.197396] usbcore: registered new interface driver hub
187[ 0.197487] usbcore: registered new device driver usb
188[ 0.198870] pps_core: LinuxPPS API ver. 1 registered
189[ 0.198882] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giome tti <giometti@linux.it>
190[ 0.198914] PTP clock support registered
191[ 0.199113] EDAC MC: Ver: 3.0.0
192[ 0.199452] dmi: Firmware registration failed.
193[ 0.202222] Advanced Linux Sound Architecture Driver Initialized.
194[ 0.203267] clocksource: Switched to clocksource arch_sys_counter
195[ 0.203402] VFS: Disk quotas dquot_6.6.0
196[ 0.203467] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
197[ 0.203626] pnp: PnP ACPI: disabled
198[ 0.210888] NET: Registered protocol family 2
199[ 0.211433] TCP established hash table entries: 8192 (order: 4, 65536 bytes)
200[ 0.211549] TCP bind hash table entries: 8192 (order: 5, 131072 bytes)
201[ 0.211708] TCP: Hash tables configured (established 8192 bind 8192)
202[ 0.211853] UDP hash table entries: 512 (order: 2, 16384 bytes)
203[ 0.211895] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
204[ 0.212053] NET: Registered protocol family 1
205[ 0.212410] RPC: Registered named UNIX socket transport module.
206[ 0.212418] RPC: Registered udp transport module.
207[ 0.212425] RPC: Registered tcp transport module.
208[ 0.212431] RPC: Registered tcp NFSv4.1 backchannel transport module.
209[ 0.212597] Unpacking initramfs...
210[ 0.476650] Freeing initrd memory: 4300K
211[ 0.477476] hw perfevents: enabled with armv8_cortex_a53 PMU driver, 7 counte rs available
212[ 0.477817] kvm [1]: HYP mode not available
213[ 0.479318] audit: initializing netlink subsys (disabled)
214[ 0.479453] audit: type=2000 audit(0.475:1): state=initialized audit_enabled= 0 res=1
215[ 0.479862] workingset: timestamp_bits=44 max_order=18 bucket_order=0
216[ 0.487452] squashfs: version 4.0 (2009/01/31) Phillip Lougher
217[ 0.488176] NFS: Registering the id_resolver key type
218[ 0.488201] Key type id_resolver registered
219[ 0.488207] Key type id_legacy registered
220[ 0.488220] nfs4filelayout_init: NFSv4 File Layout Driver Registering...
221[ 0.488378] 9p: Installing v9fs 9p2000 file system support
222[ 0.491215] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 2 46)
223[ 0.491228] io scheduler noop registered
224[ 0.491404] io scheduler cfq registered (default)
225[ 0.491413] io scheduler mq-deadline registered
226[ 0.491420] io scheduler kyber registered
227[ 0.516826] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
228[ 0.519633] SuperH (H)SCI(F) driver initialized
229[ 0.520454] msm_serial 78af000.serial: msm_serial: detected port #1
230[ 0.520558] msm_serial 78af000.serial: uartclk = 19200000
231[ 0.520624] 78af000.serial: ttyMSM1 at MMIO 0x78af000 (irq = 9, base_baud = 1 200000) is a MSM
232[ 0.521209] msm_serial 78b0000.serial: msm_serial: detected port #0
233[ 0.521283] msm_serial 78b0000.serial: uartclk = 7372800
234[ 0.521347] 78b0000.serial: ttyMSM0 at MMIO 0x78b0000 (irq = 10, base_baud = 460800) is a MSM
235[ 0.521366] msm_serial: console setup on port #0
236[ 1.374583] console [ttyMSM0] enabled
237[ 1.379812] msm_serial: driver initialized
238[ 1.384238] qcom-iommu 1ef0000.iommu: iommu sec: pgtable size: 94208
239[ 1.401388] loop: module loaded
240[ 1.406395] spi_qup 78b7000.spi: IN:block:16, fifo:64, OUT:block:16, fifo:64
241[ 1.407576] spi_qup 78b9000.spi: IN:block:16, fifo:64, OUT:block:16, fifo:64
242[ 1.413943] spmi spmi-0: PMIC arbiter version v2 (0x20010000)
243[ 1.428874] s1: supplied by regulator-dummy
244[ 1.429209] s2: supplied by regulator-dummy
245[ 1.432184] s3: supplied by regulator-dummy
246[ 1.436267] s4: supplied by regulator-dummy
247[ 1.440414] l1: supplied by regulator-dummy
248[ 1.444598] l2: supplied by regulator-dummy
249[ 1.448750] l3: supplied by regulator-dummy
250[ 1.452921] l4: supplied by regulator-dummy
251[ 1.457096] l5: supplied by regulator-dummy
252[ 1.461229] l6: supplied by regulator-dummy
253[ 1.465403] l7: supplied by regulator-dummy
254[ 1.469573] l8: supplied by regulator-dummy
255[ 1.473773] l9: supplied by regulator-dummy
256[ 1.477904] l10: supplied by regulator-dummy
257[ 1.482067] l11: supplied by regulator-dummy
258[ 1.486606] l12: supplied by regulator-dummy
259[ 1.490850] l13: supplied by regulator-dummy
260[ 1.495099] l14: supplied by regulator-dummy
261[ 1.499377] l15: supplied by regulator-dummy
262[ 1.503607] l16: supplied by regulator-dummy
263[ 1.507860] l17: supplied by regulator-dummy
264[ 1.512129] l18: supplied by regulator-dummy
265[ 1.517498] libphy: Fixed MDIO Bus: probed
266[ 1.521156] tun: Universal TUN/TAP device driver, 1.6
267[ 1.526268] e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k
268[ 1.529445] e1000e: Copyright(c) 1999 - 2015 Intel Corporation.
269[ 1.535216] igb: Intel(R) Gigabit Ethernet Network Driver - version 5.4.0-k
270[ 1.540983] igb: Copyright (c) 2007-2014 Intel Corporation.
271[ 1.547981] igbvf: Intel(R) Gigabit Virtual Function Network Driver - version 2.4.0-k
272[ 1.553485] igbvf: Copyright (c) 2009 - 2012 Intel Corporation.
273[ 1.562065] sky2: driver version 1.30
274[ 1.567853] usbcore: registered new interface driver rtl8150
275[ 1.571049] usbcore: registered new interface driver r8152
276[ 1.576797] usbcore: registered new interface driver asix
277[ 1.582090] usbcore: registered new interface driver ax88179_178a
278[ 1.587690] VFIO - User Level meta-driver version: 0.3
279[ 1.595901] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
280[ 1.598624] ehci-pci: EHCI PCI platform driver
281[ 1.605184] ehci-platform: EHCI generic platform driver
282[ 1.609795] ehci-orion: EHCI orion driver
283[ 1.614847] ehci-exynos: EHCI EXYNOS driver
284[ 1.619012] ehci-msm: Qualcomm On-Chip EHCI Host Controller
285[ 1.622983] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
286[ 1.628412] ohci-pci: OHCI PCI platform driver
287[ 1.634693] ohci-platform: OHCI generic platform driver
288[ 1.639294] ohci-exynos: OHCI EXYNOS driver
289[ 1.645041] usbcore: registered new interface driver usb-storage
290[ 1.648469] usbcore: registered new interface driver usbserial
291[ 1.654659] usbcore: registered new interface driver usbserial_generic
292[ 1.660291] usbserial: USB Serial support registered for generic
293[ 1.687185] usb3503 usb2513: switched to HUB mode
294[ 1.687207] usb3503 usb2513: usb3503_probe: probed in hub mode
295[ 1.703924] msm_hsusb 78d9000.usb: 78d9000.usb supply vbus not found, using d ummy regulator
296[ 1.707848] i2c /dev entries driver
297[ 1.712132] i2c_qup 78b6000.i2c: using default clock-frequency 100000
298[ 1.714550] i2c_qup 78b6000.i2c:
299[ 1.714550] tx channel not available
300[ 1.721879] i2c_qup 78b8000.i2c: using default clock-frequency 100000
301[ 1.727939] i2c_qup 78b8000.i2c:
302[ 1.727939] tx channel not available
303[ 1.735387] i2c_qup 78ba000.i2c: using default clock-frequency 100000
304[ 1.741300] i2c_qup 78ba000.i2c:
305[ 1.741300] tx channel not available
306[ 1.753121] input: pm8941_pwrkey as /devices/platform/soc/200f000.spmi/spmi-0 /0-00/200f000.spmi:pm8916@0:pon@800/200f000.spmi:pm8916@0:pon@800:pwrkey/input/i nput0
307[ 1.756222] input: pm8941_pwrkey as /devices/platform/soc/200f000.spmi/spmi-0 /0-00/200f000.spmi:pm8916@0:pon@800/200f000.spmi:pm8916@0:pon@800:resin/input/in put1
308[ 1.772482] qcom-tsens 4a8000.thermal-sensor: tsens calibration failed
309[ 1.786847] sdhci: Secure Digital Host Controller Interface driver
310[ 1.790200] sdhci: Copyright(c) Pierre Ossman
311[ 1.796704] Synopsys Designware Multimedia Card Interface Driver
312[ 1.802327] sdhci-pltfm: SDHCI platform and OF driver helper
313[ 1.809671] sdhci_msm 7864900.sdhci: Got CD GPIO
314[ 1.815620] ledtrig-cpu: registered to indicate activity on CPUs
315[ 1.818624] usbcore: registered new interface driver usbhid
316[ 1.823069] usbhid: USB HID core driver
317[ 1.831938] usbcore: registered new interface driver snd-usb-audio
318[ 1.833856] NET: Registered protocol family 10
319[ 1.839340] Segment Routing with IPv6
320[ 1.842883] NET: Registered protocol family 17
321[ 1.846698] 9pnet: Installing 9P2000 support
322[ 1.850995] Key type dns_resolver registered
323[ 1.856411] registered taskstats version 1
324[ 1.878870] s1: supplied by regulator-dummy
325[ 1.878946] s1: Bringing 0uV into 375000-375000uV
326[ 1.881936] msm_hsusb 78d9000.usb: 78d9000.usb supply vbus not found, using d ummy regulator
327[ 1.887885] s2: supplied by regulator-dummy
328[ 1.895148] s3: supplied by regulator-dummy
329[ 1.903723] s3: Bringing 0uV into 375000-375000uV
330[ 1.905559] sdhci_msm 7864900.sdhci: Got CD GPIO
331[ 1.908485] s4: supplied by regulator-dummy
332[ 1.912808] s4: Bringing 0uV into 1800000-1800000uV
333[ 1.917825] l1: supplied by s3
334[ 1.923434] l1: Bringing 0uV into 375000-375000uV
335[ 1.924342] input: gpio_keys as /devices/platform/gpio_keys/input/input2
336[ 1.929838] l2: supplied by s3
337[ 1.931436] hctosys: unable to open rtc device (rtc0)
338[ 1.933172] sdhci_msm 7864900.sdhci: Got CD GPIO
339[ 1.936277] l2: Bringing 0uV into 1200000-1200000uV
340[ 1.939511] fakeRegulator2: disabling
341[ 1.944763] l3: supplied by s3
342[ 1.948903] fakeRegulator1: disabling
343[ 1.953503] l3: Bringing 0uV into 375000-375000uV
344[ 1.957346] ALSA device list:
345[ 1.960743] l4: supplied by s4
346[ 1.963978] No soundcards found.
347[ 1.974590] l4: Bringing 0uV into 1750000-1750000uV
348[ 1.975208] l5: supplied by s4
349[ 1.982788] l5: Bringing 0uV into 1750000-1750000uV
350[ 1.986475] l6: supplied[ 1.994333] l7: supplied by s4
351[ 1.994389] l7: Bringing 0uV into 1750000-1750000uV
352[ 1.994785] Freeing unused kernel memory: 1216K
353[ 1.996775] l8: supplied by regulator-dummy
354[ 2.005648] l8: Bringing 0uV into 1750000-1750000uV
355[ 2.010320] l9: supplied by regulator-dummy
356[ 2.014644] l9: Bringing 0uV into 1750000-1750000uV
357[ 2.019211] l10: supplied by regulator-dummy
358[ 2.023690] l10: Bringing 0uV into 1750000-1750000uV
359[ 2.028589] l11: supplied by regulator-dummy
360[ 2.033131] l11: Bringing 0uV into 1750000-1750000uV
361[ 2.037794] l12: supplied by regulator-dummy
362[ 2.042340] l12: Bringing 0uV into 1750000-1750000uV
363[ 2.047022] l13: supplied by regulator-dummy
364[ 2.051549] l13: Bringing 0uV into 1750000-1750000uV
365[ 2.056171] l14: supplied by regulator-dummy
366[ 2.060736] l14: Bringing 0uV into 1750000-1750000uV
367[ 2.065354] l15: supplied by regulator-dummy
368[ 2.069931] l15: Bringing 0uV into 1750000-1750000uV
369[ 2.075013] l16: supplied by regulator-dummy
370[ 2.079156] l16: Bringing 0uV into 1750000-1750000uV
371[ 2.083866] l17: supplied by regulator-dummy
372[ 2.088347] l17: Bringing 0uV into 3300000-3300000uV
373[ 2.093701] l18: supplied by regulator-dummy
374[ 2.097568] l18: Bringing 0uV into 1750000-1750000uV
375Loading, please wait...
376Starting version 240
377[ 2.151417] mmc0: SDHCI controller on 7824900.sdhci [7824900.sdhci] using ADM A 64-bit
378[ 2.153055] sdhci_msm 7864900.sdhci: Got CD GPIO
379[ 2.211683] mmc1: SDHCI controller on 7864900.sdhci [7864900.sdhci] using ADM A 64-bit
380[ 2.220015] mmc0: new HS200 MMC card at address 0001
381[ 2.220722] mmcblk0: mmc0:0001 DS1008 7.28 GiB
382[ 2.224339] mmcblk0boot0: mmc0:0001 DS1008 partition 1 4.00 MiB
383[ 2.234313] mmcblk0boot1: mmc0:0001 DS1008 partition 2 4.00 MiB
384[ 2.234537] mmcblk0rpmb: mmc0:0001 DS1008 partition 3 4.00 MiB
385[ 2.249807] ci_hdrc ci_hdrc.0: EHCI Host Controller
386[ 2.249847] ci_hdrc ci_hdrc.0: new USB bus registered, assigned bus number 1
387[ 2.255371] mmcblk0: p1 p2 p3 p4 p5 p6 p7 p8 p9 p10
388[ 2.267322] ci_hdrc ci_hdrc.0: USB 2.0 started, EHCI 1.00
389[ 2.268138] hub 1-0:1.0: USB hub found
390[ 2.271768] hub 1-0:1.0: 1 port detected
391[ 2.278338] cpu cpu0: _opp_add: duplicate OPPs detected. Existing: freq: 2000 00000, volt: 1050000, enabled: 1. New: freq: 200000000, volt: 1050000, enabled: 1
392[ 2.365628] random: fast init done
393[ 2.500572] rtc-pm8xxx 200f000.spmi:pm8916@0:rtc@6000: rtc core: registered p m8xxx_rtc as rtc0
394[ 2.611332] usb 1-1: new high-speed USB device number 2 using ci_hdrc
395[ 2.771608] hub 1-1:1.0: USB hub found
396[ 2.771918] hub 1-1:1.0: 3 ports detected
397Begin: Loading essential drivers ... done.
398Begin: Running /scripts/init-premount ... done.
399Begin: Mounting root file system ... Begin: Running /scripts/local-top ... done.
400Begin: Running /scripts/local-premount ... done.
401Begin: Will now check root file system ... fsck from util-linux 2.33.1
402fsck: error 2 (No such file or directory) while executing fsck.ext4 for /dev/mmc blk0p10
403fsck exited with status code 8
404done.
405Warning: File system check failed but did not detect errors
406[ 8.022954] EXT4-fs (mmcblk0p10): recovery complete
407[ 8.049921] EXT4-fs (mmcblk0p10): mounted filesystem with ordered data mode. Opts: (null)
408done.
409Begin: Running /scripts/local-bottom ... done.
410Begin: Running /scripts/init-bottom ... done.
411[ 8.287696] systemd[1]: System time before build time, advancing clock.
412[ 8.342191] ip_tables: (C) 2000-2006 Netfilter Core Team
413
414Welcome to Debian GNU/Linux buster/sid!
415
416File /lib/systemd/system/systemd-journald.service:12 configures an IP firewall (IPAddressDeny=any), but the local system does not support BPF/cgroup based firewalling.
417Proceeding WITHOUT firewalling in effect! (This warning is only shown for the first loaded unit using IP firewalling.)
418[ 8.681452] random: systemd: uninitialized urandom read (16 bytes read)
419[ 8.685885] random: systemd: uninitialized urandom read (16 bytes read)
420[ 8.687411] random: systemd: uninitialized urandom read (16 bytes read)
421[ OK ] Started Forward Password R…uests to Wall Directory Watch.
422[ OK ] Listening on Syslog Socket.
423[ OK ] Listening on udev Kernel Socket.
424[ OK ] Created slice User and Session Slice.
425[ OK ] Listening on Journal Socket (/dev/log).
426[ OK ] Listening on Journal Audit Socket.
427[ OK ] Listening on Journal Socket.
428 Mounting POSIX Message Queue File System...
429 Starting Create list of re…odes for the current kernel...
430 Starting Journal Service...
431[ OK ] Listening on initctl Compatibility Named Pipe.
432[ OK ] Set up automount Arbitrary…s File System Automount Point.
433 Starting Set the console keyboard layout...
434[ OK ] Listening on udev Control Socket.
435[ OK ] Created slice system-getty.slice.
436[ 8.781824] EXT4-fs (mmcblk0p10): re-mounted. Opts: data=ordered
437 Mounting Huge Pages File System...
438[ OK ] Reached target Remote File Systems.
439[ OK ] Reached target Slices.
440[ OK ] Created slice system-serial\x2dgetty.slice.
441[ OK ] Reached target Swap.
442 Starting Load Kernel Modules...
443 Mounting Kernel Debug File System...
444[ OK ] Listening on fsck to fsckd communication Socket.
445 Starting Remount Root and Kernel File Systems...
446 Starting udev Coldplug all Devices...
447 Starting Nameserver information manager...
448[ OK ] Started Dispatch Password …ts to Console Directory Watch.
449[ OK ] Reached target Paths.
450[ OK ] Reached target Local Encrypted Volumes.
451[ OK ] Mounted POSIX Message Queue File System.
452[ OK ] Started Create list of req… nodes for the current kernel.
453[ OK ] Mounted Huge Pages File System.
454[ OK ] Started Load Kernel Modules.
455[ OK ] Mounted Kernel Debug File System.
456 Mounting Kernel Configuration File System...
457 Starting Apply Kernel Variables...
458[ OK ] Started Remount Root and Kernel File Systems.
459[ OK ] Mounted Kernel Configuration File System.
460[ OK ] Started Nameserver information manager.
461 Starting Create System Users...
462 Starting Load/Save Random Seed...
463[ OK ] Started Journal Service.
464[ OK ] Started Apply Kernel Variables.
465[ OK ] Started Create System Users.
466[ OK ] Started Load/Save Random Seed.
467 Starting Create Static Device Nodes in /dev...
468 Starting Flush Journal to Persistent Storage...
469[ OK ] Started Create Static Device Nodes in /dev.
470 Starting udev Kernel Device Manager...
471[ 9.096128] systemd-journald[1601]: Received request to flush runtime journal from PID 1
472[ OK ] Started Flush Journal to Persistent Storage.
473[ OK ] Started udev Coldplug all Devices.
474[ OK ] Started Set the console keyboard layout.
475[ OK ] Reached target Local File Systems (Pre).
476[ OK ] Reached target Local File Systems.
477 Starting Raise network interfaces...
478 Starting Set console font and keymap...
479 Starting Create Volatile Files and Directories...
480[ OK ] Started udev Kernel Device Manager.
481[ OK ] Started Set console font and keymap.
482[ OK ] Started Create Volatile Files and Directories.
483 Starting Network Time Synchronization...
484 Starting Update UTMP about System Boot/Shutdown...
485[ OK ] Started Update UTMP about System Boot/Shutdown.
486[ OK ] Started Raise network interfaces.
487[ OK ] Started Network Time Synchronization.
488[ OK ] Reached target System Time Synchronized.
489[ OK ] Reached target System Initialization.
490[ OK ] Started Daily apt download activities.
491[ OK ] Started Daily apt upgrade and clean activities.
492[ 9.613025] media: Linux media interface: v0.10
493[ 9.627374] Linux video capture interface: v2.00
494[ OK ] Listening on GPS (Global P…ioning System) Daemon Sockets.[ 9.634018] adreno 1c00000.gpu: Linked as a consumer to soc:iommu@1f08000
495
496[ 9.650981] msm_mdp 1a01000.mdp: Linked as a consumer to 1ef0000.iommu
497[ 9.651067] iommu: Adding device 1a01000.mdp to group 1
498[ 9.663849] msm_dsi_phy 1a98300.dsi-phy: Using legacy clk name binding. Use "iface" instead of "iface_clk"
499[ 9.666575] msm 1a00000.mdss: Using legacy clk name binding. Use "iface" instead of "iface_clk"
500[ 9.672532] msm 1a00000.mdss: Using legacy clk name binding. Use "bus" instead of "bus_clk"
501[ 9.681615] msm 1a00000.mdss: Using legacy clk name binding. Use "vsync" instead of "vsync_clk"
502[ 9.689979] msm 1a00000.mdss: 1a00000.mdss supply vdd not found, using dummy regulator
503[ 9.699217] msm_mdp 1a01000.mdp: Using legacy clk name binding. Use "bus" instead of "bus_clk"
504[ 9.706480] msm_mdp 1a01000.mdp: Using legacy clk name binding. Use "iface" instead of "iface_clk"
505[ 9.715072] msm_mdp 1a01000.mdp: Using legacy clk name binding. Use "core" instead of "core_clk"
506[ 9.724100] msm_mdp 1a01000.mdp: Using legacy clk name binding. Use "vsync" instead of "vsync_clk"
507[ 9.733218] msm_mdp 1a01000.mdp: MDP5 version v1.6
508[ 9.742081] msm 1a00000.mdss: bound 1a01000.mdp (ops mdp5_ops [msm])
509[ 9.746845] msm_dsi 1a98000.dsi: 1a98000.dsi supply gdsc not found, using dummy regulator
510[ 9.753625] msm_dsi 1a98000.dsi: 1a98000.dsi supply gdsc not found, using dummy regulator
511[ 9.761678] msm_dsi 1a98000.dsi: Using legacy clk name binding. Use "mdp_core" instead of "mdp_core_clk"
512[ 9.769551] msm_dsi 1a98000.dsi: Using legacy clk name binding. Use "iface" instead of "iface_clk"
513[ 9.779120] msm_dsi 1a98000.dsi: Using legacy clk name binding. Use "bus" instead of "bus_clk"
514[ 9.787973] msm_dsi 1a98000.dsi: Using legacy clk name binding. Use "byte" instead of "byte_clk"
515[ 9.796678] msm_dsi 1a98000.dsi: Using legacy clk name binding. Use "pixel" instead of "pixel_clk"
516[ 9.797334] qcom,pm8916-wcd-spmi-codec 200f000.spmi:pm8916@1:codec@f000: DT property missing, MBHC btn detection disabled
517[ 9.805668] msm_dsi 1a98000.dsi: Using legacy clk name binding. Use "core" instead of "core_clk"
518[ 9.826369] panel-jdi-lt070me05000: probe of 1a98000.dsi.0 failed with error -22
519[ 9.834700] msm 1a00000.mdss: bound 1a98000.dsi (ops dsi_ops [msm])
520[ 9.842475] adreno 1c00000.gpu: 1c00000.gpu supply vdd not found, using dummy regulator
521[ 9.847951] adreno 1c00000.gpu: 1c00000.gpu supply vddcx not found, using dummy regulator
522[ 9.855944] msm 1a00000.mdss: A306: using IOMMU
523[ 9.864753] msm 1a00000.mdss: bound 1c00000.gpu (ops a3xx_ops [msm])
524[ OK ] Started Daily rotation of log files.
525[ 9.888520] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
526[ 9.888540] [drm] Driver supports precise vblank timestamp query.
527[ 9.894553] [drm] Initialized msm 1.3.0 20130625 for 1a00000.mdss on minor 0
528[ 9.900270] Unable to handle kernel read from unreadable memory at virtual address ffff000008b48280
529[ 9.907336] Mem abort info:
530[ 9.916098] Exception class = IABT (current EL), IL = 32 bits
531[ 9.918845] SET = 0, FnV = 0
532[ 9.924769] EA = 0, S1PTW = 0
533[ 9.927899] swapper pgtable: 4k pages, 48-bit VAs, pgd = ffff00000933e000
534[ 9.930918] [ffff000008b48280] *pgd=00000000bfefe803, *pud=00000000bfefd803, *pmd=00000000bfefb803, *pte=00e0000080b48f93
535[ 9.937918] Internal error: Oops: 8600000f [#1] PREEMPT SMP
536[ 9.948795] Modules linked in: snd_soc_lpass_apq8016(+) snd_soc_msm8916_digital(+) snd_soc_lpass_cpu snd_soc_lpass_platform leds_qcom_lpg snd_soc_apq8016_sbc(+) snd_soc_msm8916_analog qcom_camss(+) venus_core(+) videobuf2_dma_sg v4l2_fwnode v4l2_mem2mem videobuf2_memops videobuf2_v4l2 msm_rng(+) videobuf2_core rng_core videodev msm(+) media mdt_loader rpmsg_char rmtfs_mem ip_tables x_tables rtc_pm8xxx i2c_qcom_cci
537[ 9.968746] CPU: 0 PID: 1653 Comm: systemd-udevd Not tainted 4.14.0-qcomlt-arm64 #1
538[ 9.990976] Hardware name: Qualcomm Technologies, Inc. APQ 8016 SBC (DT)
539[ 9.998440] task: ffff800004375400 task.stack: ffff00000c860000
540[ 10.005387] PC is at proc_dir_inode_operations+0x0/0x100
541[ 10.011179] LR is at dsi_mgr_connector_get_modes+0x50/0x228 [msm]
542[ 10.016582] pc : [<ffff000008b48280>] lr : [<ffff000000bbe590>] pstate: 20000145
543[ 10.022572] sp : ffff00000c863680
544[ 10.030032] x29: ffff00000c863680 x28: ffff80003caae618
545[ 10.033246] x27: 00000000014000c0 x26: ffff000008e9b430
546[ 10.038628] x25: fffffffffffffffe x24: ffff000000bcdf98
547[ 10.043924] x23: ffff000000bdc938 x22: 0000000000000000
548[ 10.049219] x21: ffff80003c461000 x20: ffff80003c461000
549[ 10.054514] x19: ffff80000435c818 x18: 0000000000000010
550[ 10.059809] x17: 0000ffff95525e90 x16: ffff000008221ab0
551[ 10.065105] x15: ffffffffffffffff x14: ffff0000892e794f
552[ 10.070399] x13: ffff0000092e795d x12: ffff000009159df8
553[ 10.075694] x11: ffff0000085a9f90 x10: ffff00000c8635f0
554[ 10.080989] x9 : 0000000000000000 x8 : ffff8000043a2a80
555[ 10.086284] x7 : 0000000000000000 x6 : ffff000008f22260
556[ 10.091580] x5 : ffff000008e9b430 x4 : ffff80003c544480
557[ 10.096874] x3 : 0000000000000000 x2 : 00000000fffffff0
558[ 10.102171] x1 : ffff000008b48280 x0 : ffff80000435c818
559[ 10.107466] Process systemd-udevd (pid: 1653, stack limit = 0xffff00000c860000)
560[ 10.112763] Call trace:
561[ 10.119790] Exception stack(0xffff00000c863540 to 0xffff00000c863680)
562[ 10.122227] 3540: ffff80000435c818 ffff000008b48280 00000000fffffff0 0000000000000000
563[ 10.128825] 3560: ffff80003c544480 ffff000008e9b430 ffff000008f22260 0000000000000000
564[ 10.136637] 3580: ffff8000043a2a80 0000000000000000 ffff00000c8635f0 ffff0000085a9f90
565[ 10.144451] 35a0: ffff000009159df8 ffff0000092e795d ffff0000892e794f ffffffffffffffff
566[ 10.152263] 35c0: ffff000008221ab0 0000ffff95525e90 0000000000000010 ffff80000435c818
567[ 10.160076] 35e0: ffff80003c461000 ffff80003c461000 0000000000000000 ffff000000bdc938
568[ 10.167888] 3600: ffff000000bcdf98 fffffffffffffffe ffff000008e9b430 00000000014000c0
569[ 10.175701] 3620: ffff80003caae618 ffff00000c863680 ffff000000bbe590 ffff00000c863680
570[ 10.183513] 3640: ffff000008b48280 0000000020000145 ffff00000c8636d0 ffff0000085ca308
571[ 10.191326] 3660: 0000ffffffffffff ffff0000085c9d94 ffff00000c863680 ffff000008b48280
572[ 10.199141] [<ffff000008b48280>] proc_dir_inode_operations+0x0/0x100
573[ 10.206951] [<ffff0000085ca2c0>] drm_helper_probe_single_connector_modes+0x510/0x6c8
574[ 10.213374] [<ffff0000085d8e68>] drm_setup_crtcs+0x180/0x9d0
575[ 10.221098] [<ffff0000085d96e8>] __drm_fb_helper_initial_config_and_unlock+0x30/0x3d8
576[ 10.226743] [<ffff0000085d9acc>] drm_fb_helper_initial_config+0x3c/0x48
577[ 10.234615] [<ffff000000bb6be4>] msm_fbdev_init+0x7c/0xe8 [msm]
578[ 10.241028] [<ffff000000baf844>] msm_drm_bind+0x34c/0x500 [msm]
579[ 10.246795] [<ffff0000086077e8>] try_to_bring_up_master+0x200/0x310
580[ 10.252696] [<ffff000008607b10>] component_master_add_with_match+0xa0/0xf0
581[ 10.259087] [<ffff000000baf420>] msm_pdev_probe+0x258/0x330 [msm]
582[ 10.265892] [<ffff000008610340>] platform_drv_probe+0x58/0xb8
583[ 10.272053] [<ffff00000860e374>] driver_probe_device+0x2dc/0x430
584[ 10.277781] [<ffff00000860e594>] __driver_attach+0xcc/0x118
585[ 10.283857] [<ffff00000860c114>] bus_for_each_dev+0x4c/0x98
586[ 10.289152] [<ffff00000860db38>] driver_attach+0x20/0x28
587[ 10.294707] [<ffff00000860d560>] bus_add_driver+0x1f0/0x288
588[ 10.300263] [<ffff00000860efe0>] driver_register+0x60/0xf8
589[ 10.305559] [<ffff000008610290>] __platform_driver_register+0x40/0x48
590[ 10.311258] [<ffff000000bfd180>] msm_drm_register+0x48/0x80 [msm]
591[ 10.317628] [<ffff000008083cb8>] do_one_initcall+0x38/0x120
592[ 10.323702] [<ffff00000815e0d0>] do_init_module+0x58/0x1b0
593[ 10.329083] [<ffff00000815ceb8>] load_module+0x1e38/0x23a8
594[ 10.334639] [<ffff00000815d710>] SyS_finit_module+0xd0/0xe8
595[ 10.340105] Exception stack(0xffff00000c863ec0 to 0xffff00000c864000)
596[ 10.345578] 3ec0: 000000000000000f 0000ffff9544d450 0000000000000000 000000000000000f
597[ 10.352175] 3ee0: 0000000000000000 0000000000000002 0000000000000001 0000000000000001
598[ 10.359989] 3f00: 0000000000000111 0000000000000001 0000000000000000 0000000000000000
599[ 10.367801] 3f20: 00000000dcbffbdc 0000000000000000 0000000000000001 0000000000000002
600[ 10.375614] 3f40: 0000ffff95462f90 0000ffff9552fc10 000000000000002f 0000aaaaf370eed0
601[ 10.383425] 3f60: 0000ffff9544d450 0000000000000000 0000000000020000 0000aaaaf370bf50
602[ 10.391239] 3f80: 0000aaaaf36fcd00 0000aaaabf11b000 0000aaaabf11c000 0000000000020000
603[ 10.399052] 3fa0: 0000aaaaf370eed0 0000fffff291bc50 0000ffff95445ff0 0000fffff291bc50
604[ 10.406864] 3fc0: 0000ffff9552fc34 0000000040000000 000000000000000f 0000000000000111
605[ 10.414675] 3fe0: 0000000000000000 0000000000000000 0000000000000000 0000000000000000
606[ 10.422490] [<ffff000008083b18>] __sys_trace_return+0x0/0x4
607[ 10.430299] Code: 00000000 00000000 00000000 00000000 (082919c0)
608[ 10.435682] ---[ end trace 2e453cb00661538c ]---
609[ OK ] Listening on D-Bus System Message Bus Socket.
610[ OK ] Reached target Sockets.
611[ OK ] Reached target Basic System.
612 Starting Login Service...
613[ OK ] Started D-Bus System Message Bus.
614[ OK ] Started Regular background program processing daemon.
615 Starting System Logging Service...
616 Starting LSB: Load kernel …d to enable cpufreq scaling...
617 Starting WPA supplicant...
618 Starting Restore /etc/reso… the ppp link was shut down...
619 Starting Disk Manager...
620 Starting QRTR service...
621 Starting Modem Manager...
622[ OK ] Started Trigger anacron every hour.
623[ OK ] Started Run anacron jobs.
624 Starting Network Manager...
625 Starting Initialize hardware monitoring sensors...
626[ OK ] Started Daily Cleanup of Temporary Directories.
627[ 10.746073] NET: Registered protocol family 42
628[ OK ] Reached target Timers.
629[ OK ] Started System Logging Service.
630[ OK ] Started Restore /etc/resol…re the ppp link was shut down.
631[ OK ] Started QRTR service.
632[ OK ] Started Initialize hardware monitoring sensors.
633[ OK ] Started LSB: Load kernel m…ded to enable cpufreq scaling.
634[ 11.124792] adv7511 3-0039: 3-0039 supply dvdd not found, using dummy regulator
635[ 11.124867] adv7511 3-0039: 3-0039 supply pvdd not found, using dummy regulator
636[ 11.131108] adv7511 3-0039: 3-0039 supply a2vdd not found, using dummy regulator
637[ OK ] Found device /dev/ttyMSM0.
638[ OK ] Started Network Manager.
639 Starting Hostname Service...
640 Starting Authorization Manager...
641 Starting LSB: set CPUFreq kernel parameters...
642 Starting RMTFS setup...
643[ OK ] Started Authorization Manager.
644[ OK ] Started WPA supplicant.
645[ OK ] Started Login Service.
646[ OK ] Reached target Network.
647 Starting Permit User Sessions...
648 Starting /etc/rc.local Compatibility...
649 Starting OpenBSD Secure Shell server...
650[ OK ] Started LSB: set CPUFreq kernel parameters.
651[ OK ] Started Permit User Sessions.
652[ OK ] Started /etc/rc.local Compatibility.
653[ OK ] Started Modem Manager.
654[ OK ] Started Hostname Service.
655 Starting Network Manager Script Dispatcher Service...
656[ OK ] Started Serial Getty on ttyMSM0.
657 Starting Simple Desktop Display Manager...
658[ OK ] Started Getty on tty1.
659[ OK ] Reached target Login Prompts.
660[ OK ] Started Simple Desktop Display Manager.
661[ OK ] Started Disk Manager.
662[ OK ] Started Network Manager Script Dispatcher Service.
663[ OK ] Listening on Load/Save RF …itch Status /dev/rfkill Watch.
664[ OK ] Created slice system-systemd\x2dbacklight.slice.
665 Starting Load/Save Screen … of backlight:1a98000.dsi.0...
666[FAILED] Failed to start Load/Save …ss of backlight:1a98000.dsi.0.
667See 'systemctl status systemd-backlight…ght:1a98000.dsi.0.service' for details.
668
669Debian GNU/Linux buster/sid linaro-alip ttyMSM0
670
671linaro-alip login: root (automatic login)
672
673Last login: Fri Dec 21 18:53:41 UTC 2018 on ttyMSM0
674Linux linaro-alip 4.14.0-qcomlt-arm64 #1 SMP PREEMPT Fri Oct 18 12:37:42 CEST 2019 aarch64
675
676The programs included with the Debian GNU/Linux system are free software;
677the exact distribution terms for each program are described in the
678individual files in /usr/share/doc/*/copyright.
679
680Debian GNU/Linux comes with ABSOLUTELY NO WARRANTY, to the extent
681permitted by applicable law.
682root@linaro-alip:~#