· 9 years ago · Nov 05, 2016, 03:14 AM
1[ 0.000000 / 01-01 00:00:00.000][0] Initializing cgroup subsys cpu
2[ 0.000000 / 01-01 00:00:00.000][0] Initializing cgroup subsys cpuacct
3[ 0.000000 / 01-01 00:00:00.000][0] Linux version 3.18.31-lge-h918-1.0 (jc@gallifrey) (gcc version 6.1.1 20160711 (Linaro GCC 6.1-2016.08) ) #1 SMP PREEMPT Fri Nov 4 22:49:51 EDT 2016
4[ 0.000000 / 01-01 00:00:00.000][0] CPU: AArch64 Processor [511f2112] revision 2
5[ 0.000000 / 01-01 00:00:00.000][0] alternatives: detected feature GIC system register CPU interface
6[ 0.000000 / 01-01 00:00:00.000][0] L1_CACHE_BYTES (128) Cache Writeback Granule (128)
7[ 0.000000 / 01-01 00:00:00.000][0] Machine: Qualcomm Technologies, Inc. MSM 8996 v3.x + PMI8996 MTP
8[ 0.000000 / 01-01 00:00:00.000][0] efi: Getting EFI parameters from FDT:
9[ 0.000000 / 01-01 00:00:00.000][0] efi: UEFI not found.
10[ 0.000000 / 01-01 00:00:00.000][0] Reserved memory: reserved region for node 'removed_regions@85800000': base 0x0000000085800000, size 40 MiB
11[ 0.000000 / 01-01 00:00:00.000][0] Reserved memory: reserved region for node 'peripheral_region@8e900000': base 0x000000008e900000, size 45 MiB
12[ 0.000000 / 01-01 00:00:00.000][0] Reserved memory: reserved region for node 'modem_region@88800000': base 0x0000000088000000, size 105 MiB
13[ 0.000000 / 01-01 00:00:00.000][0] Reserved memory: reserved region for node 'cont_splash_mem_hdmi@b1c00000': base 0x00000000b1c00000, size 35 MiB
14[ 0.000000 / 01-01 00:00:00.000][0] Reserved memory: reserved region for node 'ramoops_region@c0000000': base 0x00000000c0000000, size 1 MiB
15[ 0.000000 / 01-01 00:00:00.000][0] Reserved memory: reserved region for node 'crash_fb_mem@c0100000': base 0x00000000c0100000, size 12 MiB
16[ 0.000000 / 01-01 00:00:00.000][0] Removed memory: created DMA memory pool at 0x0000000085800000, size 40 MiB
17[ 0.000000 / 01-01 00:00:00.000][0] Reserved memory: initialized node removed_regions@85800000, compatible id removed-dma-pool
18[ 0.000000 / 01-01 00:00:00.000][0] Removed memory: created DMA memory pool at 0x000000008e900000, size 45 MiB
19[ 0.000000 / 01-01 00:00:00.000][0] Reserved memory: initialized node peripheral_region@8e900000, compatible id removed-dma-pool
20[ 0.000000 / 01-01 00:00:00.000][0] Reserved memory: allocated memory for 'adsp_region' node: base 0x00000000ff800000, size 4 MiB
21[ 0.000000 / 01-01 00:00:00.000][0] Reserved memory: created CMA memory pool at 0x00000000ff800000, size 4 MiB
22[ 0.000000 / 01-01 00:00:00.000][0] Reserved memory: initialized node adsp_region, compatible id shared-dma-pool
23[ 0.000000 / 01-01 00:00:00.000][0] Reserved memory: allocated memory for 'qseecom_region' node: base 0x00000000fe400000, size 20 MiB
24[ 0.000000 / 01-01 00:00:00.000][0] Reserved memory: created CMA memory pool at 0x00000000fe400000, size 20 MiB
25[ 0.000000 / 01-01 00:00:00.000][0] Reserved memory: initialized node qseecom_region, compatible id shared-dma-pool
26[ 0.000000 / 01-01 00:00:00.000][0] Reserved memory: allocated memory for 'secure_region' node: base 0x00000000f8800000, size 92 MiB
27[ 0.000000 / 01-01 00:00:00.000][0] Reserved memory: created CMA memory pool at 0x00000000f8800000, size 92 MiB
28[ 0.000000 / 01-01 00:00:00.000][0] Reserved memory: initialized node secure_region, compatible id shared-dma-pool
29[ 0.000000 / 01-01 00:00:00.000][0] Removed memory: created DMA memory pool at 0x0000000088000000, size 105 MiB
30[ 0.000000 / 01-01 00:00:00.000][0] Reserved memory: initialized node modem_region@88800000, compatible id removed-dma-pool
31[ 0.000000 / 01-01 00:00:00.000][0] Removed memory: created DMA memory pool at 0x00000000c0000000, size 1 MiB
32[ 0.000000 / 01-01 00:00:00.000][0] Reserved memory: initialized node ramoops_region@c0000000, compatible id removed-dma-pool
33[ 0.000000 / 01-01 00:00:00.000][0] cma: Reserved 32 MiB at 0x00000000f6800000
34[ 0.000000 / 01-01 00:00:00.000][0] psci: probing for conduit method from DT.
35[ 0.000000 / 01-01 00:00:00.000][0] psci: PSCIv1.0 detected in firmware.
36[ 0.000000 / 01-01 00:00:00.000][0] psci: Using standard PSCI v0.2 function IDs
37[ 0.000000 / 01-01 00:00:00.000][0] psci: Initializing psci_cpu_init
38[ 0.000000 / 01-01 00:00:00.000][0] psci: Initializing psci_cpu_init
39[ 0.000000 / 01-01 00:00:00.000][0] psci: Initializing psci_cpu_init
40[ 0.000000 / 01-01 00:00:00.000][0] PERCPU: Embedded 15 pages/cpu @ffffffc0fe310000 s22272 r8192 d30976 u61440
41[ 0.000000 / 01-01 00:00:00.000][0] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 977334
42[ 0.000000 / 01-01 00:00:00.000][0] [LGE-HW_REV] board_revno_setup : [LGE-HW-REV] Rev.rev_10
43[ 0.000000 / 01-01 00:00:00.000][0] CCMODE: CC mode disabled
44[ 0.000000 / 01-01 00:00:00.000][0] LGE BOOT REASON: 0x77665502
45[ 0.000000 / 01-01 00:00:00.000][0] [LGE-CD] boot_cable_setup : Boot cable : 400MA 8
46[ 0.000000 / 01-01 00:00:00.000][0] [LGE-BATT-ID] battery_information_setup : Battery : SW3800_VC0 187
47[ 0.000000 / 01-01 00:00:00.000][0] androidboot.dlcomplete = 0
48[ 0.000000 / 01-01 00:00:00.000][0] PID hash table entries: 4096 (order: 3, 32768 bytes)
49[ 0.000000 / 01-01 00:00:00.000][0] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
50[ 0.000000 / 01-01 00:00:00.000][0] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
51[ 0.000000 / 01-01 00:00:00.000][0] Memory: 3665040K/3971392K available (12676K kernel code, 1633K rwdata, 7060K rodata, 488K init, 2549K bss, 306352K reserved)
52[ 0.000000 / 01-01 00:00:00.000][0] Virtual kernel memory layout:
53[ 0.000000 / 01-01 00:00:00.000][0] vmalloc : 0xffffff8000000000 - 0xffffffbdbfff0000 ( 246 GB)
54[ 0.000000 / 01-01 00:00:00.000][0] vmemmap : 0xffffffbdc0000000 - 0xffffffbfc0000000 ( 8 GB maximum)
55[ 0.000000 / 01-01 00:00:00.000][0] 0xffffffbdc0000000 - 0xffffffbdc3f95400 ( 63 MB actual)
56[ 0.000000 / 01-01 00:00:00.000][0] PCI I/O : 0xffffffbffa000000 - 0xffffffbffb000000 ( 16 MB)
57[ 0.000000 / 01-01 00:00:00.000][0] fixed : 0xffffffbffbdfd000 - 0xffffffbffbdff000 ( 8 KB)
58[ 0.000000 / 01-01 00:00:00.000][0] modules : 0xffffffbffc000000 - 0xffffffc000000000 ( 64 MB)
59[ 0.000000 / 01-01 00:00:00.000][0] memory : 0xffffffc000000000 - 0xffffffc0fe550000 ( 4069 MB)
60[ 0.000000 / 01-01 00:00:00.000][0] .init : 0xffffffc0013c9000 - 0xffffffc001443000 ( 488 KB)
61[ 0.000000 / 01-01 00:00:00.000][0] SLUB: HWalign=128, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
62[ 0.000000 / 01-01 00:00:00.000][0] HMP scheduling enabled.
63[ 0.000000 / 01-01 00:00:00.000][0] Preemptible hierarchical RCU implementation.
64[ 0.000000 / 01-01 00:00:00.000][0] RCU dyntick-idle grace-period acceleration is enabled.
65[ 0.000000 / 01-01 00:00:00.000][0] NR_IRQS:64 nr_irqs:64 0
66[ 0.000000 / 01-01 00:00:00.000][0] CPU0: found redistributor 0 region 0:0x0000000009c00000
67[ 0.000000 / 01-01 00:00:00.000][0] mpm_init_irq_domain(): Cannot find irq controller for qcom,gpio-parent
68[ 0.000000 / 01-01 00:00:00.000][0] MPM 1 irq mapping errored -517
69[ 0.000000 / 01-01 00:00:00.000][0] Architected cp15 and mmio timer(s) running at 19.20MHz (virt/virt).
70[ 0.000004 / 01-01 00:00:00.000][0] sched_clock: 56 bits at 19MHz, resolution 52ns, wraps every 3579139424256ns
71[ 0.000020 / 01-01 00:00:00.000][0] Switched to clocksource arch_sys_counter
72[ 0.000828 / 01-01 00:00:00.000][0] Calibrating delay loop (skipped), value calculated using timer frequency.. 38.40 BogoMIPS (lpj=192000)
73[ 0.000843 / 01-01 00:00:00.000][0] pid_max: default: 32768 minimum: 301
74[ 0.001739 / 01-01 00:00:00.000][0] Security Framework initialized
75[ 0.001756 / 01-01 00:00:00.000][0] SELinux: Initializing.
76[ 0.001827 / 01-01 00:00:00.000][0] Mount-cache hash table entries: 8192 (order: 4, 65536 bytes)
77[ 0.001838 / 01-01 00:00:00.000][0] Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes)
78[ 0.002358 / 01-01 00:00:00.000][0] Initializing cgroup subsys freezer
79[ 0.002378 / 01-01 00:00:00.000][0] Initializing cgroup subsys net_cls
80[ 0.002643 / 01-01 00:00:00.000][0] /cpus/cpu@0: Unknown CPU type
81[ 0.002656 / 01-01 00:00:00.000][0] /cpus/cpu@1: Unknown CPU type
82[ 0.002667 / 01-01 00:00:00.000][0] /cpus/cpu@100: Unknown CPU type
83[ 0.002680 / 01-01 00:00:00.000][0] /cpus/cpu@101: Unknown CPU type
84[ 0.002717 / 01-01 00:00:00.000][0] hw perfevents: enabled with arm/armv8-pmuv3 PMU driver, 9 counters available
85[ 0.002744 / 01-01 00:00:00.000][0] EFI services will not be available.
86[ 0.009141 / 01-01 00:00:00.000][0] NOHZ: local_softirq_pending 02
87[ 0.010707 / 01-01 00:00:00.000][0]
88[ 0.010707 / 01-01 00:00:00.000][0] **********************************************************
89[ 0.010722 / 01-01 00:00:00.000][0] ** NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE **
90[ 0.010729 / 01-01 00:00:00.000][0] ** **
91[ 0.010736 / 01-01 00:00:00.000][0] ** trace_printk() being used. Allocating extra memory. **
92[ 0.010742 / 01-01 00:00:00.000][0] ** **
93[ 0.010749 / 01-01 00:00:00.000][0] ** This means that this is a DEBUG kernel and it is **
94[ 0.010755 / 01-01 00:00:00.000][0] ** unsafe for produciton use. **
95[ 0.010762 / 01-01 00:00:00.000][0] ** **
96[ 0.010768 / 01-01 00:00:00.000][0] ** If you see this message and you are not debugging **
97[ 0.010774 / 01-01 00:00:00.000][0] ** the kernel, report this immediately to your vendor! **
98[ 0.010781 / 01-01 00:00:00.000][0] ** **
99[ 0.010787 / 01-01 00:00:00.000][0] ** NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE **
100[ 0.010794 / 01-01 00:00:00.000][0] **********************************************************
101[ 0.011457 / 01-01 00:00:00.000][0] MSM Memory Dump base table set up
102[ 0.011479 / 01-01 00:00:00.000][0] MSM Memory Dump apps data table set up
103[ 0.012678 / 01-01 00:00:00.000][0] panic-handler: reserved[@0xc0100000+@0xc00000)
104[ 0.014360 / 01-01 00:00:00.000][0] clock-cpu-8996: configuring clocks for the perf cluster
105[ 0.014535 / 01-01 00:00:00.000][0] cpu_clock_8996_early_init: finished CPU clock configuration
106[ 0.015922 / 01-01 00:00:00.000][1] CPU1: Booted secondary processor
107[ 0.015946 / 01-01 00:00:00.000][1] CPU1: found redistributor 1 region 0:0x0000000009c40000
108[ 0.018321 / 01-01 00:00:00.000][2] CPU2: Booted secondary processor
109[ 0.018372 / 01-01 00:00:00.000][2] CPU2: found redistributor 100 region 0:0x0000000009c80000
110[ 0.020631 / 01-01 00:00:00.019][3] CPU3: Booted secondary processor
111[ 0.020648 / 01-01 00:00:00.019][3] CPU3: found redistributor 101 region 0:0x0000000009cc0000
112[ 0.020797 / 01-01 00:00:00.019][0] Brought up 4 CPUs
113[ 0.020851 / 01-01 00:00:00.019][0] SMP: Total of 4 processors activated.
114[ 0.024038 / 01-01 00:00:00.019][2] DMI not present or invalid.
115[ 0.031349 / 01-01 00:00:00.029][2] pinctrl core: initialized pinctrl subsystem
116[ 0.031746 / 01-01 00:00:00.029][2] regulator-dummy: no parameters
117[ 0.091603 / 01-01 00:00:00.089][2] NET: Registered protocol family 16
118[ 0.160080 / 01-01 00:00:00.159][2] cpuidle: using governor ladder
119[ 0.170087 / 01-01 00:00:00.169][2] cpuidle: using governor menu
120[ 0.240067 / 01-01 00:00:00.239][2] cpuidle: using governor qcom
121[ 0.241260 / 01-01 00:00:00.239][2] vdso: 2 pages (1 code @ ffffffc001465000, 1 data @ ffffffc001464000)
122[ 0.241669 / 01-01 00:00:00.239][2] software IO TLB [mem 0xffc00000-0x100000000] (4MB) mapped at [ffffffc07fc00000-ffffffc07fffffff]
123[ 0.242475 / 01-01 00:00:00.239][2] DMA: preallocated 2048 KiB pool for atomic allocations
124[ 0.242719 / 01-01 00:00:00.239][2] msm_smem_init: unable to create logging context
125[ 0.242759 / 01-01 00:00:00.239][2] msm_smd_init: unable to create SMD logging context
126[ 0.242770 / 01-01 00:00:00.239][2] msm_smd_init: unable to create SMSM logging context
127[ 0.242984 / 01-01 00:00:00.239][2] <CORE> glink_init: unable to create log context
128[ 0.243189 / 01-01 00:00:00.239][2] <CORE> glink_core_register_transport: unable to create log context for [dsps:smd_trans]
129[ 0.243326 / 01-01 00:00:00.239][2] <CORE> glink_core_register_transport: unable to create log context for [lpass:smd_trans]
130[ 0.243456 / 01-01 00:00:00.239][2] <CORE> glink_core_register_transport: unable to create log context for [mpss:smd_trans]
131[ 0.243585 / 01-01 00:00:00.239][2] <CORE> glink_core_register_transport: unable to create log context for [wcnss:smd_trans]
132[ 0.243709 / 01-01 00:00:00.239][2] <CORE> glink_core_register_transport: unable to create log context for [rpm:smd_trans]
133[ 0.255573 / 01-01 00:00:00.249][2] qcom,msm-apm 99e0000.apm: overriding clock sources across APM switch
134[ 0.256486 / 01-01 00:00:00.249][2] sps:sps is ready.
135[ 0.257562 / 01-01 00:00:00.249][2] i2c-msm-v2 757a000.i2c: could not find pctldev for node /soc/pinctrl@01010000/i2c_6/i2c_6_default, deferring probe
136[ 0.257851 / 01-01 00:00:00.249][2] i2c-msm-v2 75b5000.i2c: could not find pctldev for node /soc/pinctrl@01010000/i2c_7/i2c_7_default, deferring probe
137[ 0.258246 / 01-01 00:00:00.249][2] i2c-msm-v2 75b6000.i2c: could not find pctldev for node /soc/pinctrl@01010000/i2c_8/i2c_8_active, deferring probe
138[ 0.260139 / 01-01 00:00:00.259][2] cpu-clock-8996 6400000.qcom,cpu-clock-8996: resources init failed
139[ 0.288674 / 01-01 00:00:00.279][2] smd_channel_probe_now: allocation table not initialized
140[ 0.288961 / 01-01 00:00:00.279][2] smd_channel_probe_now: allocation table not initialized
141[ 0.289248 / 01-01 00:00:00.279][2] smd_channel_probe_now: allocation table not initialized
142[ 0.289524 / 01-01 00:00:00.279][2] smd_channel_probe_now: allocation table not initialized
143[ 0.289777 / 01-01 00:00:00.279][2] msm_watchdog 9830000.qcom,wdt: wdog absent resource not present
144[ 0.290074 / 01-01 00:00:00.289][2] msm_watchdog 9830000.qcom,wdt: MSM Watchdog Initialized
145[ 0.290779 / 01-01 00:00:00.289][2] msm_rpm_dev_probe: APSS-RPM communication over GLINK
146[ 0.299111 / 01-01 00:00:00.289][2] spmi_pmic_arb 400f000.qcom,spmi: PMIC Arb Version-2 0x20010000
147[ 0.300682 / 01-01 00:00:00.299][2] spmi_pmic_arb 400f000.qcom,spmi: missing property: qcom,pmic-arb-max-periph-interrupts
148[ 0.305670 / 01-01 00:00:00.299][2] pmi8994_s2: 400 <--> 1015 mV at 530 mV normal idle
149[ 0.306296 / 01-01 00:00:00.299][2] platform 9300000.qcom,lpass: assigned reserved memory node peripheral_region@8e900000
150[ 0.306583 / 01-01 00:00:00.299][2] platform ce0000.qcom,venus: assigned reserved memory node peripheral_region@8e900000
151[ 0.306898 / 01-01 00:00:00.299][2] platform 1c00000.qcom,ssc: assigned reserved memory node peripheral_region@8e900000
152[ 0.307266 / 01-01 00:00:00.299][2] platform 2080000.qcom,mss: assigned reserved memory node modem_region@88800000
153[ 0.310233 / 01-01 00:00:00.309][1] msm-thermal 70000.qcom,msm-thermal: probe_vdd_mx:Failed reading node=/soc/qcom,msm-thermal, key=qcom,mx-restriction-temp. KTM continues
154[ 0.310375 / 01-01 00:00:00.309][1] msm_thermal:vdd_restriction_reg_init Defer regulator vdd-dig probe
155[ 0.310388 / 01-01 00:00:00.309][1] msm_thermal:probe_vdd_rstr Err regulator init. err:-517. KTM continues.
156[ 0.310403 / 01-01 00:00:00.309][1] msm-thermal 70000.qcom,msm-thermal: probe_vdd_rstr:Failed reading node=/soc/qcom,msm-thermal, key=qcom,max-freq-level. err=-517. KTM continues
157[ 0.310416 / 01-01 00:00:00.309][1] msm_thermal:msm_thermal_dev_probe Failed reading node=/soc/qcom,msm-thermal, key=qcom,online-hotplug-core. err:-517
158[ 0.315437 / 01-01 00:00:00.309][1] platform soc:qcom,msm-adsprpc-mem: assigned reserved memory node adsp_region
159[ 0.316644 / 01-01 00:00:00.309][1] <CORE> glink_core_register_transport: unable to create log context for [mpss:smem]
160[ 0.317583 / 01-01 00:00:00.309][1] <CORE> glink_core_register_transport: unable to create log context for [lpass:smem]
161[ 0.318512 / 01-01 00:00:00.309][1] <CORE> glink_core_register_transport: unable to create log context for [dsps:smem]
162[ 0.319218 / 01-01 00:00:00.309][1] <CORE> glink_core_register_transport: unable to create log context for [rpm:smem]
163[ 0.319523 / 01-01 00:00:00.309][0] smd_channel_probe_now: allocation table not initialized
164[ 0.319688 / 01-01 00:00:00.309][2] msm_rpm_trans_notify_state: glink config params: transport=(null), edge=rpm, name=rpm_requests
165[ 0.320624 / 01-01 00:00:00.319][2] msm_cache_erp64 6500000.qcom,cache_erp64: Registering for L1 error interrupts
166[ 0.320733 / 01-01 00:00:00.319][2] msm_cache_erp64 6500000.qcom,cache_erp64: Registering for L2 error interrupts
167[ 0.320896 / 01-01 00:00:00.319][2] msm_cache_erp64 6500000.qcom,cache_erp64: Registering for L3 error interrupts
168[ 0.321170 / 01-01 00:00:00.319][2] msm_m4m_erp 9a40000.qcom,m4m_erp64: Registering for M4M error interrupts
169[ 0.323121 / 01-01 00:00:00.319][2] apc0_pwrcl_mem_acc_corner: 0 <--> 0 mV
170[ 0.323476 / 01-01 00:00:00.319][2] apc1_perfcl_mem_acc_corner: 0 <--> 0 mV
171[ 0.323817 / 01-01 00:00:00.319][2] apcc_l3_mem_acc_corner: 0 <--> 0 mV
172[ 0.324168 / 01-01 00:00:00.319][2] gfx_mem_acc_corner: 0 <--> 0 mV
173[ 0.324571 / 01-01 00:00:00.319][2] kryo0-retention: 468 <--> 892 mV at 520 mV
174[ 0.324787 / 01-01 00:00:00.319][2] kryo0: 468 <--> 892 mV at 754 mV
175[ 0.324937 / 01-01 00:00:00.319][2] kryo_regulator_probe: kryo0: default LDO functional volt=754021 uV, LDO retention volt=521789 uV, Vref func=325285 + 4466*(val), cluster-num=0
176[ 0.325238 / 01-01 00:00:00.319][2] kryo1-retention: 468 <--> 892 mV at 520 mV
177[ 0.325447 / 01-01 00:00:00.319][2] kryo1: 468 <--> 892 mV at 754 mV
178[ 0.325583 / 01-01 00:00:00.319][2] kryo_regulator_probe: kryo1: default LDO functional volt=754021 uV, LDO retention volt=521789 uV, Vref func=325285 + 4466*(val), cluster-num=1
179[ 0.330118 / 01-01 00:00:00.329][2] platform soc:qcom,kgsl-hyp: assigned reserved memory node peripheral_region@8e900000
180[ 0.331487 / 01-01 00:00:00.329][2] msm_mpm_dev_probe(): Cannot get clk resource for XO: -517
181[ 0.350789 / 01-01 00:00:00.349][1] __of_mpm_init(): MPM driver mapping exists
182[ 0.356340 / 01-01 00:00:00.349][1] console [pstore-1] enabled
183[ 0.356354 / 01-01 00:00:00.349][1] pstore: Registered ramoops as persistent store backend
184[ 0.356366 / 01-01 00:00:00.349][1] ramoops: attached 0x80000@0xc0000000, ecc: 0/0
185[ 0.358114 / 01-01 00:00:00.349][1] i2c-msm-v2 7577000.i2c: probing driver i2c-msm-v2
186[ 0.358243 / 01-01 00:00:00.349][1] i2c-msm-v2 7577000.i2c: error on clk_get(core_clk):-517
187[ 0.358261 / 01-01 00:00:00.349][1] i2c-msm-v2 7577000.i2c: error probe() failed with err:-517
188[ 0.360006 / 01-01 00:00:00.349][1] i2c-msm-v2 757a000.i2c: probing driver i2c-msm-v2
189[ 0.360176 / 01-01 00:00:00.359][1] i2c-msm-v2 757a000.i2c: error on clk_get(core_clk):-517
190[ 0.360194 / 01-01 00:00:00.359][1] i2c-msm-v2 757a000.i2c: error probe() failed with err:-517
191[ 0.360956 / 01-01 00:00:00.359][1] i2c-msm-v2 75b5000.i2c: probing driver i2c-msm-v2
192[ 0.361068 / 01-01 00:00:00.359][1] i2c-msm-v2 75b5000.i2c: error on clk_get(core_clk):-517
193[ 0.361085 / 01-01 00:00:00.359][1] i2c-msm-v2 75b5000.i2c: error probe() failed with err:-517
194[ 0.361785 / 01-01 00:00:00.359][1] i2c-msm-v2 75b6000.i2c: probing driver i2c-msm-v2
195[ 0.361906 / 01-01 00:00:00.359][1] i2c-msm-v2 75b6000.i2c: error on clk_get(core_clk):-517
196[ 0.361923 / 01-01 00:00:00.359][1] i2c-msm-v2 75b6000.i2c: error probe() failed with err:-517
197[ 0.362143 / 01-01 00:00:00.359][1] cpu-clock-8996 6400000.qcom,cpu-clock-8996: resources init failed
198[ 0.362992 / 01-01 00:00:00.359][1] pm8994_s1_corner: 0 <--> 0 mV at 0 mV normal idle
199[ 0.363478 / 01-01 00:00:00.359][1] pm8994_s1_floor_corner: 0 <--> 0 mV at 0 mV normal idle
200[ 0.363883 / 01-01 00:00:00.359][1] pm8994_s1_corner_ao: 0 <--> 0 mV at 0 mV normal idle
201[ 0.364354 / 01-01 00:00:00.359][1] pm8994_s2_corner: 0 <--> 0 mV at 0 mV normal idle
202[ 0.364745 / 01-01 00:00:00.359][1] pm8994_s2_corner_ao: 0 <--> 0 mV at 0 mV normal idle
203[ 0.365212 / 01-01 00:00:00.359][1] pm8994_s3: 1300 mV normal idle
204[ 0.365668 / 01-01 00:00:00.359][1] pm8994_s4: 1800 mV normal idle
205[ 0.366121 / 01-01 00:00:00.359][1] pm8994_s5: 2150 mV normal idle
206[ 0.366560 / 01-01 00:00:00.359][1] pm8994_s7: 800 mV normal idle
207[ 0.367020 / 01-01 00:00:00.359][1] pm8994_l1: 1000 mV normal idle
208[ 0.367468 / 01-01 00:00:00.359][1] pm8994_l2: 1250 mV normal idle
209[ 0.368248 / 01-01 00:00:00.359][1] pm8994_l3: 1050 mV normal idle
210[ 0.368711 / 01-01 00:00:00.359][1] pm8994_l4: 1225 mV normal idle
211[ 0.369172 / 01-01 00:00:00.359][1] pm8994_l6: 1200 mV normal idle
212[ 0.369605 / 01-01 00:00:00.359][1] pm8994_l8: 1800 mV normal idle
213[ 0.370115 / 01-01 00:00:00.369][1] pm8994_l9: 1800 mV normal idle
214[ 0.370571 / 01-01 00:00:00.369][1] pm8994_l10: 1800 mV normal idle
215[ 0.371031 / 01-01 00:00:00.369][1] pm8994_l11: 1200 mV normal idle
216[ 0.371480 / 01-01 00:00:00.369][1] pm8994_l12: 1800 mV normal idle
217[ 0.372396 / 01-01 00:00:00.369][1] pm8994_l13: 1800 <--> 2950 mV at 2950 mV normal idle
218[ 0.372865 / 01-01 00:00:00.369][1] pm8994_l14: 1800 mV normal idle
219[ 0.373716 / 01-01 00:00:00.369][1] pm8994_l15: 1800 mV normal idle
220[ 0.374179 / 01-01 00:00:00.369][1] pm8994_l16: 2700 mV normal idle
221[ 0.374628 / 01-01 00:00:00.369][1] pm8994_l17: 2800 mV normal idle
222[ 0.375435 / 01-01 00:00:00.369][1] pm8994_l18: 2200 mV normal idle
223[ 0.375853 / 01-01 00:00:00.369][1] pm8994_l18_pin_ctrl: 2700 <--> 2900 mV at 2700 mV normal idle
224[ 0.376314 / 01-01 00:00:00.369][1] pm8994_l19: 3000 mV normal idle
225[ 0.376757 / 01-01 00:00:00.369][1] pm8994_l20: 2950 mV normal idle
226[ 0.377212 / 01-01 00:00:00.369][1] pm8994_l21: 2950 mV normal idle
227[ 0.378037 / 01-01 00:00:00.369][1] pm8994_l22: 3300 mV normal idle
228[ 0.378523 / 01-01 00:00:00.369][1] pm8994_l23: 2800 mV normal idle
229[ 0.378967 / 01-01 00:00:00.369][1] pm8994_l24: 3075 mV normal idle
230[ 0.379430 / 01-01 00:00:00.369][1] pm8994_l25: 1200 mV normal idle
231[ 0.380273 / 01-01 00:00:00.379][1] pm8994_l26_corner: 0 <--> 0 mV at 0 mV normal idle
232[ 0.380702 / 01-01 00:00:00.379][1] pm8994_l26_floor_corner: 0 <--> 0 mV at 0 mV normal idle
233[ 0.381154 / 01-01 00:00:00.379][1] pm8994_l27: 1000 mV normal idle
234[ 0.381616 / 01-01 00:00:00.379][1] pm8994_l28: 925 mV normal idle
235[ 0.382385 / 01-01 00:00:00.379][1] pm8994_l29: 2800 mV normal idle
236[ 0.382857 / 01-01 00:00:00.379][1] pm8994_l30: 1800 mV normal idle
237[ 0.383306 / 01-01 00:00:00.379][1] pm8994_l32: 1800 mV normal idle
238[ 0.383751 / 01-01 00:00:00.379][1] pm8994_lvs1: no parameters
239[ 0.384150 / 01-01 00:00:00.379][1] pm8994_lvs2: no parameters
240[ 0.384575 / 01-01 00:00:00.379][1] pmi8994_s1: 1025 mV normal idle
241[ 0.385012 / 01-01 00:00:00.379][1] pmi8994_boost_5v: no parameters
242[ 0.385185 / 01-01 00:00:00.379][1] qcom,rpm-smd-regulator soc:qcom,rpm-smd:rpm-regulator-bstb:regulator-bst: Failed to find supply parent
243[ 0.385293 / 01-01 00:00:00.379][1] rpm_vreg_device_probe: regulator_register failed: pmi8994_boost_5v, rc=-517
244[ 0.385637 / 01-01 00:00:00.379][1] pmi8994_boost_pin_ctrl: no parameters
245[ 0.385749 / 01-01 00:00:00.379][1] qcom,rpm-smd-regulator soc:qcom,rpm-smd:rpm-regulator-bstb:regulator-bst-pin-ctrl: Failed to find supply parent
246[ 0.385851 / 01-01 00:00:00.379][1] rpm_vreg_device_probe: regulator_register failed: pmi8994_boost_pin_ctrl, rc=-517
247[ 0.386239 / 01-01 00:00:00.379][1] pmi8994_boostbypass: 3150 <--> 3600 mV at 3150 mV normal idle
248[ 0.386624 / 01-01 00:00:00.379][1] pm8994_s11: 470 <--> 1140 mV at 905 mV normal idle
249[ 0.386854 / 01-01 00:00:00.379][1] pm8994_s11_avs_limit: 470 <--> 1140 mV
250[ 0.386983 / 01-01 00:00:00.379][1] spm_regulator_probe: name=pm8994_s11, range=LV, voltage=905000 uV, mode=AUTO, step rate=2400 uV/us
251[ 0.388033 / 01-01 00:00:00.379][1] msm_thermal:sensor_mgr_init_threshold threshold id already initialized
252[ 0.388069 / 01-01 00:00:00.379][1] msm-thermal 70000.qcom,msm-thermal: probe_vdd_mx:Failed reading node=/soc/qcom,msm-thermal, key=qcom,mx-restriction-temp. KTM continues
253[ 0.388524 / 01-01 00:00:00.379][1] msm_thermal:vdd_restriction_reg_init Defer regulator vdd-gfx probe
254[ 0.388546 / 01-01 00:00:00.379][1] msm_thermal:probe_vdd_rstr Err regulator init. err:-517. KTM continues.
255[ 0.388565 / 01-01 00:00:00.379][1] msm-thermal 70000.qcom,msm-thermal: probe_vdd_rstr:Failed reading node=/soc/qcom,msm-thermal, key=qcom,max-freq-level. err=-517. KTM continues
256[ 0.388580 / 01-01 00:00:00.379][1] msm_thermal:msm_thermal_dev_probe Failed reading node=/soc/qcom,msm-thermal, key=qcom,online-hotplug-core. err:-517
257[ 0.389143 / 01-01 00:00:00.379][1] msm_mpm_dev_probe(): Cannot get clk resource for XO: -517
258[ 0.389656 / 01-01 00:00:00.379][1] i2c-msm-v2 7577000.i2c: probing driver i2c-msm-v2
259[ 0.389765 / 01-01 00:00:00.379][1] i2c-msm-v2 7577000.i2c: error on clk_get(core_clk):-517
260[ 0.389783 / 01-01 00:00:00.379][1] i2c-msm-v2 7577000.i2c: error probe() failed with err:-517
261[ 0.390579 / 01-01 00:00:00.389][1] i2c-msm-v2 757a000.i2c: probing driver i2c-msm-v2
262[ 0.390696 / 01-01 00:00:00.389][1] i2c-msm-v2 757a000.i2c: error on clk_get(core_clk):-517
263[ 0.390712 / 01-01 00:00:00.389][1] i2c-msm-v2 757a000.i2c: error probe() failed with err:-517
264[ 0.391415 / 01-01 00:00:00.389][1] i2c-msm-v2 75b5000.i2c: probing driver i2c-msm-v2
265[ 0.391525 / 01-01 00:00:00.389][1] i2c-msm-v2 75b5000.i2c: error on clk_get(core_clk):-517
266[ 0.391541 / 01-01 00:00:00.389][1] i2c-msm-v2 75b5000.i2c: error probe() failed with err:-517
267[ 0.392239 / 01-01 00:00:00.389][1] i2c-msm-v2 75b6000.i2c: probing driver i2c-msm-v2
268[ 0.392361 / 01-01 00:00:00.389][1] i2c-msm-v2 75b6000.i2c: error on clk_get(core_clk):-517
269[ 0.392378 / 01-01 00:00:00.389][1] i2c-msm-v2 75b6000.i2c: error probe() failed with err:-517
270[ 0.392768 / 01-01 00:00:00.389][1] cpu-clock-8996 6400000.qcom,cpu-clock-8996: resources init failed
271[ 0.412151 / 01-01 00:00:00.409][2] qcom,gcc-8996 300000.qcom,gcc: Registered GCC clocks.
272[ 0.413202 / 01-01 00:00:00.409][2] vfe0_clk_src: set OPP pair(75000000 Hz: 3 uV) on a10000.qcom,vfe0
273[ 0.413225 / 01-01 00:00:00.409][2] vfe0_clk_src: set OPP pair(320000000 Hz: 5 uV) on a10000.qcom,vfe0
274[ 0.413243 / 01-01 00:00:00.409][2] vfe0_clk_src: set OPP pair(600000000 Hz: 7 uV) on a10000.qcom,vfe0
275[ 0.413489 / 01-01 00:00:00.409][2] vfe1_clk_src: set OPP pair(75000000 Hz: 3 uV) on a14000.qcom,vfe1
276[ 0.413506 / 01-01 00:00:00.409][2] vfe1_clk_src: set OPP pair(320000000 Hz: 5 uV) on a14000.qcom,vfe1
277[ 0.413522 / 01-01 00:00:00.409][2] vfe1_clk_src: set OPP pair(600000000 Hz: 7 uV) on a14000.qcom,vfe1
278[ 0.413792 / 01-01 00:00:00.409][2] cpp_clk_src: set OPP pair(100000000 Hz: 3 uV) on a04000.qcom,cpp
279[ 0.413809 / 01-01 00:00:00.409][2] cpp_clk_src: set OPP pair(480000000 Hz: 5 uV) on a04000.qcom,cpp
280[ 0.413823 / 01-01 00:00:00.409][2] cpp_clk_src: set OPP pair(640000000 Hz: 7 uV) on a04000.qcom,cpp
281[ 0.423455 / 01-01 00:00:00.419][2] qcom,mmsscc-8996 8c0000.qcom,mmsscc: Registered MMSS clocks.
282[ 0.425294 / 01-01 00:00:00.419][2] pmi8994_boost_5v: no parameters
283[ 0.425401 / 01-01 00:00:00.419][2] qcom,rpm-smd-regulator soc:qcom,rpm-smd:rpm-regulator-bstb:regulator-bst: Failed to find supply parent
284[ 0.425503 / 01-01 00:00:00.419][2] rpm_vreg_device_probe: regulator_register failed: pmi8994_boost_5v, rc=-517
285[ 0.425710 / 01-01 00:00:00.419][2] pmi8994_boost_pin_ctrl: no parameters
286[ 0.425768 / 01-01 00:00:00.419][2] qcom,rpm-smd-regulator soc:qcom,rpm-smd:rpm-regulator-bstb:regulator-bst-pin-ctrl: Failed to find supply parent
287[ 0.425859 / 01-01 00:00:00.419][2] rpm_vreg_device_probe: regulator_register failed: pmi8994_boost_pin_ctrl, rc=-517
288[ 0.426693 / 01-01 00:00:00.419][2] msm_thermal:sensor_mgr_init_threshold threshold id already initialized
289[ 0.426720 / 01-01 00:00:00.419][2] msm-thermal 70000.qcom,msm-thermal: probe_vdd_mx:Failed reading node=/soc/qcom,msm-thermal, key=qcom,mx-restriction-temp. KTM continues
290[ 0.426938 / 01-01 00:00:00.419][2] msm_thermal:vdd_restriction_reg_init Defer regulator vdd-gfx probe
291[ 0.426953 / 01-01 00:00:00.419][2] msm_thermal:probe_vdd_rstr Err regulator init. err:-517. KTM continues.
292[ 0.426972 / 01-01 00:00:00.419][2] msm-thermal 70000.qcom,msm-thermal: probe_vdd_rstr:Failed reading node=/soc/qcom,msm-thermal, key=qcom,max-freq-level. err=-517. KTM continues
293[ 0.426987 / 01-01 00:00:00.419][2] msm_thermal:msm_thermal_dev_probe Failed reading node=/soc/qcom,msm-thermal, key=qcom,online-hotplug-core. err:-517
294[ 0.427507 / 01-01 00:00:00.419][2] cpr3_msm8996_hmss_read_fuse_data: apc0_pwrcl_corner: speed bin = 0
295[ 0.427524 / 01-01 00:00:00.419][2] cpr3_msm8996_hmss_read_fuse_data: apc0_pwrcl_corner: CPR fusing revision = 6
296[ 0.427539 / 01-01 00:00:00.419][2] cpr3_msm8996_hmss_read_fuse_data: apc0_pwrcl_corner: using redundant fuses = N
297[ 0.427552 / 01-01 00:00:00.419][2] cpr3_msm8996_hmss_read_fuse_data: apc0_pwrcl_corner: CPR limitation = none
298[ 0.427566 / 01-01 00:00:00.419][2] cpr3_msm8996_hmss_read_fuse_data: apc0_pwrcl_corner: CPR partial binning limitation = none
299[ 0.427581 / 01-01 00:00:00.419][2] cpr3_msm8996_hmss_read_fuse_data: apc0_pwrcl_corner: Retention voltage fuses: VDD_MX = 4, VDD_APCC = 4
300[ 0.427790 / 01-01 00:00:00.419][2] cpr3_hmss_kvreg_init: apc0_pwrcl_corner: LDO min headroom=150000 uV, LDO max headroom=470000 uV, LDO adj=0 uV, LDO mode=allowed, LDO retention=490000 uV
301[ 0.427986 / 01-01 00:00:00.419][2] cpr3_msm8996_hmss_calculate_open_loop_voltages: apc0_pwrcl_corner: fused MinSVS: open-loop= 605000 uV
302[ 0.428001 / 01-01 00:00:00.419][2] cpr3_msm8996_hmss_calculate_open_loop_voltages: apc0_pwrcl_corner: fused SVS: open-loop= 705000 uV
303[ 0.428013 / 01-01 00:00:00.419][2] cpr3_msm8996_hmss_calculate_open_loop_voltages: apc0_pwrcl_corner: fused NOM: open-loop= 815000 uV
304[ 0.428025 / 01-01 00:00:00.419][2] cpr3_msm8996_hmss_calculate_open_loop_voltages: apc0_pwrcl_corner: fused TURBO: open-loop= 970000 uV
305[ 0.428131 / 01-01 00:00:00.419][2] cpr3_msm8996_hmss_calculate_target_quotients: apc0_pwrcl_corner: fused MinSVS: quot[ 7]= 346
306[ 0.428146 / 01-01 00:00:00.419][2] cpr3_msm8996_hmss_calculate_target_quotients: apc0_pwrcl_corner: fused SVS: quot[ 7]= 528, quot_offset[ 7]= 140
307[ 0.428160 / 01-01 00:00:00.419][2] cpr3_msm8996_hmss_calculate_target_quotients: apc0_pwrcl_corner: fused NOM: quot[ 7]= 749, quot_offset[ 7]= 220
308[ 0.428173 / 01-01 00:00:00.419][2] cpr3_msm8996_hmss_calculate_target_quotients: apc0_pwrcl_corner: fused TURBO: quot[ 7]=1026, quot_offset[ 7]= 275
309[ 0.428308 / 01-01 00:00:00.419][2] cpr3_msm8996_hmss_read_fuse_data: apc0_cbf_corner: speed bin = 0
310[ 0.428321 / 01-01 00:00:00.419][2] cpr3_msm8996_hmss_read_fuse_data: apc0_cbf_corner: CPR fusing revision = 6
311[ 0.428334 / 01-01 00:00:00.419][2] cpr3_msm8996_hmss_read_fuse_data: apc0_cbf_corner: using redundant fuses = N
312[ 0.428347 / 01-01 00:00:00.419][2] cpr3_msm8996_hmss_read_fuse_data: apc0_cbf_corner: CPR limitation = none
313[ 0.428360 / 01-01 00:00:00.419][2] cpr3_msm8996_hmss_read_fuse_data: apc0_cbf_corner: CPR partial binning limitation = none
314[ 0.428374 / 01-01 00:00:00.419][2] cpr3_msm8996_hmss_read_fuse_data: apc0_cbf_corner: Retention voltage fuses: VDD_MX = 4, VDD_APCC = 4
315[ 0.428512 / 01-01 00:00:00.419][2] cpr3_msm8996_hmss_calculate_open_loop_voltages: apc0_cbf_corner: fused MinSVS: open-loop= 605000 uV
316[ 0.428525 / 01-01 00:00:00.419][2] cpr3_msm8996_hmss_calculate_open_loop_voltages: apc0_cbf_corner: fused SVS: open-loop= 705000 uV
317[ 0.428536 / 01-01 00:00:00.419][2] cpr3_msm8996_hmss_calculate_open_loop_voltages: apc0_cbf_corner: fused NOM: open-loop= 815000 uV
318[ 0.428548 / 01-01 00:00:00.419][2] cpr3_msm8996_hmss_calculate_open_loop_voltages: apc0_cbf_corner: fused TURBO: open-loop= 970000 uV
319[ 0.428597 / 01-01 00:00:00.419][2] cpr3_msm8996_hmss_calculate_target_quotients: apc0_cbf_corner: fused MinSVS: quot[ 7]= 346
320[ 0.428610 / 01-01 00:00:00.419][2] cpr3_msm8996_hmss_calculate_target_quotients: apc0_cbf_corner: fused SVS: quot[ 7]= 528, quot_offset[ 7]= 140
321[ 0.428624 / 01-01 00:00:00.419][2] cpr3_msm8996_hmss_calculate_target_quotients: apc0_cbf_corner: fused NOM: quot[ 7]= 749, quot_offset[ 7]= 220
322[ 0.428636 / 01-01 00:00:00.419][2] cpr3_msm8996_hmss_calculate_target_quotients: apc0_cbf_corner: fused TURBO: quot[ 7]=1026, quot_offset[ 7]= 275
323[ 0.428748 / 01-01 00:00:00.419][2] cpr3_msm8996_hmss_read_fuse_data: apc1_corner: speed bin = 0
324[ 0.428761 / 01-01 00:00:00.419][2] cpr3_msm8996_hmss_read_fuse_data: apc1_corner: CPR fusing revision = 6
325[ 0.428775 / 01-01 00:00:00.419][2] cpr3_msm8996_hmss_read_fuse_data: apc1_corner: using redundant fuses = N
326[ 0.428787 / 01-01 00:00:00.419][2] cpr3_msm8996_hmss_read_fuse_data: apc1_corner: CPR limitation = none
327[ 0.428799 / 01-01 00:00:00.419][2] cpr3_msm8996_hmss_read_fuse_data: apc1_corner: CPR partial binning limitation = none
328[ 0.428813 / 01-01 00:00:00.419][2] cpr3_msm8996_hmss_read_fuse_data: apc1_corner: Retention voltage fuses: VDD_MX = 4, VDD_APCC = 4
329[ 0.429039 / 01-01 00:00:00.419][2] cpr3_hmss_kvreg_init: apc1_corner: LDO min headroom=150000 uV, LDO max headroom=470000 uV, LDO adj=0 uV, LDO mode=allowed, LDO retention=490000 uV
330[ 0.429249 / 01-01 00:00:00.419][2] cpr3_msm8996_hmss_calculate_open_loop_voltages: apc1_corner: fused MinSVS: open-loop= 595000 uV
331[ 0.429263 / 01-01 00:00:00.419][2] cpr3_msm8996_hmss_calculate_open_loop_voltages: apc1_corner: fused SVS: open-loop= 685000 uV
332[ 0.429276 / 01-01 00:00:00.419][2] cpr3_msm8996_hmss_calculate_open_loop_voltages: apc1_corner: fused NOM: open-loop= 745000 uV
333[ 0.429288 / 01-01 00:00:00.419][2] cpr3_msm8996_hmss_calculate_open_loop_voltages: apc1_corner: fused TURBO: open-loop=1010000 uV
334[ 0.429406 / 01-01 00:00:00.419][2] cpr3_msm8996_hmss_calculate_target_quotients: apc1_corner: fused MinSVS: quot[ 7]= 329
335[ 0.429420 / 01-01 00:00:00.419][2] cpr3_msm8996_hmss_calculate_target_quotients: apc1_corner: fused SVS: quot[ 7]= 489, quot_offset[ 7]= 120
336[ 0.429434 / 01-01 00:00:00.419][2] cpr3_msm8996_hmss_calculate_target_quotients: apc1_corner: fused NOM: quot[ 7]= 611, quot_offset[ 7]= 120
337[ 0.429446 / 01-01 00:00:00.419][2] cpr3_msm8996_hmss_calculate_target_quotients: apc1_corner: fused TURBO: quot[ 7]=1087, quot_offset[ 7]= 475
338[ 0.429929 / 01-01 00:00:00.419][0] cpr3_regulator_init_ctrl: apcc: Default CPR mode = SW closed-loop
339[ 0.430137 / 01-01 00:00:00.429][2] apc0_pwrcl_corner: 0 <--> 0 mV at 0 mV
340[ 0.430365 / 01-01 00:00:00.429][2] apc0_cbf_corner: 0 <--> 0 mV at 0 mV
341[ 0.433638 / 01-01 00:00:00.429][3] cpr3_regulator_measure_aging: apcc: average quotient delta=9 (count=10)
342[ 0.433673 / 01-01 00:00:00.429][3] cpr3_regulator_aging_adjust: apcc: aging measurement successful; aging reference adjustment voltage=312 uV
343[ 0.434178 / 01-01 00:00:00.429][3] apc1_corner: 0 <--> 0 mV at 0 mV
344[ 0.435729 / 01-01 00:00:00.429][3] cpr3_msm8996_mmss_read_fuse_data: gfx_corner: CPR fusing revision = 4
345[ 0.435750 / 01-01 00:00:00.429][3] cpr3_msm8996_mmss_read_fuse_data: gfx_corner: CPR limitation = none
346[ 0.436032 / 01-01 00:00:00.429][3] cpr3_msm8996_mmss_calculate_open_loop_voltages: gfx_corner: fuse_corner[0] open-loop= 640000 uV
347[ 0.436047 / 01-01 00:00:00.429][3] cpr3_msm8996_mmss_calculate_open_loop_voltages: gfx_corner: fuse_corner[1] open-loop= 685000 uV
348[ 0.436061 / 01-01 00:00:00.429][3] cpr3_msm8996_mmss_calculate_open_loop_voltages: gfx_corner: fuse_corner[2] open-loop= 805000 uV
349[ 0.436073 / 01-01 00:00:00.429][3] cpr3_msm8996_mmss_calculate_open_loop_voltages: gfx_corner: fuse_corner[3] open-loop= 895000 uV
350[ 0.436247 / 01-01 00:00:00.429][0] cpr3_regulator_init_ctrl: gfx: Default CPR mode = closed-loop
351[ 0.436377 / 01-01 00:00:00.429][3] gfx_corner: 0 <--> 0 mV at 0 mV
352[ 0.437613 / 01-01 00:00:00.429][3] i2c-msm-v2 7577000.i2c: probing driver i2c-msm-v2
353[ 0.437711 / 01-01 00:00:00.429][0] AXI: msm_bus_scale_register_client(): msm_bus_scale_register_client: Bus driver not ready.
354[ 0.437726 / 01-01 00:00:00.429][3] i2c-msm-v2 7577000.i2c: msm_bus_scale_register_client(mstr-id:86):0 (not a problem)
355[ 0.439419 / 01-01 00:00:00.429][3] i2c-msm-v2 757a000.i2c: probing driver i2c-msm-v2
356[ 0.439521 / 01-01 00:00:00.429][0] AXI: msm_bus_scale_register_client(): msm_bus_scale_register_client: Bus driver not ready.
357[ 0.439536 / 01-01 00:00:00.429][3] i2c-msm-v2 757a000.i2c: msm_bus_scale_register_client(mstr-id:86):0 (not a problem)
358[ 0.441493 / 01-01 00:00:00.439][3] i2c-msm-v2 75b5000.i2c: probing driver i2c-msm-v2
359[ 0.441598 / 01-01 00:00:00.439][0] AXI: msm_bus_scale_register_client(): msm_bus_scale_register_client: Bus driver not ready.
360[ 0.441614 / 01-01 00:00:00.439][3] i2c-msm-v2 75b5000.i2c: msm_bus_scale_register_client(mstr-id:84):0 (not a problem)
361[ 0.442547 / 01-01 00:00:00.439][2] i2c-msm-v2 75b6000.i2c: probing driver i2c-msm-v2
362[ 0.442648 / 01-01 00:00:00.439][0] AXI: msm_bus_scale_register_client(): msm_bus_scale_register_client: Bus driver not ready.
363[ 0.442664 / 01-01 00:00:00.439][2] i2c-msm-v2 75b6000.i2c: msm_bus_scale_register_client(mstr-id:84):0 (not a problem)
364[ 0.443961 / 01-01 00:00:00.439][3] cpu-clock-8996 6400000.qcom,cpu-clock-8996: using perf/pwr/cbf speed bin 0 and pvs_ver 0
365[ 0.446178 / 01-01 00:00:00.439][3] clock-cpu-8996: set OPP pair (307200000 Hz, 625000 uv) on cpu0
366[ 0.446224 / 01-01 00:00:00.439][3] clock-cpu-8996: set OPP pair (1593600000 Hz, 945000 uv) on cpu0
367[ 0.446250 / 01-01 00:00:00.439][3] clock-cpu-8996: set OPP pair (307200000 Hz, 625000 uv) on cpu1
368[ 0.446286 / 01-01 00:00:00.439][3] clock-cpu-8996: set OPP pair (1593600000 Hz, 945000 uv) on cpu1
369[ 0.446307 / 01-01 00:00:00.439][3] clock-cpu-8996: set OPP pair (307200000 Hz, 615000 uv) on cpu2
370[ 0.446368 / 01-01 00:00:00.439][3] clock-cpu-8996: set OPP pair (2150400000 Hz, 995000 uv) on cpu2
371[ 0.446388 / 01-01 00:00:00.439][3] clock-cpu-8996: set OPP pair (307200000 Hz, 615000 uv) on cpu3
372[ 0.446444 / 01-01 00:00:00.439][3] clock-cpu-8996: set OPP pair (2150400000 Hz, 995000 uv) on cpu3
373[ 0.446591 / 01-01 00:00:00.439][3] clock-cpu-8996: set OPP pair (307200000 Hz, 650000 uv) on soc:qcom,m4m
374[ 0.446636 / 01-01 00:00:00.439][3] clock-cpu-8996: set OPP pair (1593600000 Hz, 945000 uv) on soc:qcom,m4m
375[ 0.447022 / 01-01 00:00:00.439][3] qcom,gpucc-8996 8c0000.qcom,gpucc: using speed bin 0
376[ 0.447411 / 01-01 00:00:00.439][3] gfx3d_clk_src_v2: set OPP pair(133000000 Hz: 570000 uV) on b00000.qcom,kgsl-3d0
377[ 0.447441 / 01-01 00:00:00.439][3] gfx3d_clk_src_v2: set OPP pair(624000000 Hz: 895000 uV) on b00000.qcom,kgsl-3d0
378[ 0.449018 / 01-01 00:00:00.439][3] qcom,gpucc-8996 8c0000.qcom,gpucc: Registered GPU clocks.
379[ 0.449250 / 01-01 00:00:00.439][3] pmi8994_boost_5v: no parameters
380[ 0.449335 / 01-01 00:00:00.439][3] qcom,rpm-smd-regulator soc:qcom,rpm-smd:rpm-regulator-bstb:regulator-bst: Failed to find supply parent
381[ 0.449440 / 01-01 00:00:00.439][3] rpm_vreg_device_probe: regulator_register failed: pmi8994_boost_5v, rc=-517
382[ 0.449642 / 01-01 00:00:00.439][3] pmi8994_boost_pin_ctrl: no parameters
383[ 0.449702 / 01-01 00:00:00.439][3] qcom,rpm-smd-regulator soc:qcom,rpm-smd:rpm-regulator-bstb:regulator-bst-pin-ctrl: Failed to find supply parent
384[ 0.449793 / 01-01 00:00:00.439][3] rpm_vreg_device_probe: regulator_register failed: pmi8994_boost_pin_ctrl, rc=-517
385[ 0.450702 / 01-01 00:00:00.449][3] msm_thermal:sensor_mgr_init_threshold threshold id already initialized
386[ 0.450734 / 01-01 00:00:00.449][3] msm-thermal 70000.qcom,msm-thermal: probe_vdd_mx:Failed reading node=/soc/qcom,msm-thermal, key=qcom,mx-restriction-temp. KTM continues
387[ 0.451022 / 01-01 00:00:00.449][3] msm_thermal:update_cpu_freq [CPU0] : max freq = 1190400
388[ 0.451036 / 01-01 00:00:00.449][3] msm_thermal:update_cpu_freq Unable to update policy for cpu:0. err:-19
389[ 0.451051 / 01-01 00:00:00.449][3] msm_thermal:update_cpu_freq [CPU2] : max freq = 0
390[ 0.451063 / 01-01 00:00:00.449][3] msm_thermal:update_cpu_freq Unable to update policy for cpu:2. err:-19
391[ 0.451079 / 01-01 00:00:00.449][3] msm_thermal:update_cpu_freq [CPU2] : max freq = 1190400
392[ 0.451091 / 01-01 00:00:00.449][3] msm_thermal:update_cpu_freq Unable to update policy for cpu:2. err:-19
393[ 0.452154 / 01-01 00:00:00.449][3] msm_thermal:update_cpu_freq [CPU0] : max freq = 1593600
394[ 0.452172 / 01-01 00:00:00.449][3] msm_thermal:update_cpu_freq Unable to update policy for cpu:0. err:-19
395[ 0.452188 / 01-01 00:00:00.449][3] msm_thermal:update_cpu_freq [CPU2] : max freq = 4294967295
396[ 0.452201 / 01-01 00:00:00.449][3] msm_thermal:update_cpu_freq Unable to update policy for cpu:2. err:-19
397[ 0.452215 / 01-01 00:00:00.449][3] msm_thermal:update_cpu_freq [CPU2] : max freq = 2150400
398[ 0.452228 / 01-01 00:00:00.449][3] msm_thermal:update_cpu_freq Unable to update policy for cpu:2. err:-19
399[ 0.452360 / 01-01 00:00:00.449][2] pmi8994_boost_5v: no parameters
400[ 0.452445 / 01-01 00:00:00.449][2] qcom,rpm-smd-regulator soc:qcom,rpm-smd:rpm-regulator-bstb:regulator-bst: Failed to find supply parent
401[ 0.452546 / 01-01 00:00:00.449][2] rpm_vreg_device_probe: regulator_register failed: pmi8994_boost_5v, rc=-517
402[ 0.452763 / 01-01 00:00:00.449][2] pmi8994_boost_pin_ctrl: no parameters
403[ 0.452821 / 01-01 00:00:00.449][2] qcom,rpm-smd-regulator soc:qcom,rpm-smd:rpm-regulator-bstb:regulator-bst-pin-ctrl: Failed to find supply parent
404[ 0.452913 / 01-01 00:00:00.449][2] rpm_vreg_device_probe: regulator_register failed: pmi8994_boost_pin_ctrl, rc=-517
405[ 0.524806 / 01-01 00:00:00.519][3] KPI: Bootloader start count = 45086
406[ 0.524829 / 01-01 00:00:00.519][3] KPI: Bootloader end count = 242919
407[ 0.524842 / 01-01 00:00:00.519][3] KPI: Bootloader display count = 62631
408[ 0.524854 / 01-01 00:00:00.519][3] KPI: Bootloader load kernel count = 6026
409[ 0.524869 / 01-01 00:00:00.519][3] KPI: Kernel MPM timestamp = 270362
410[ 0.524880 / 01-01 00:00:00.519][3] KPI: Kernel MPM Clock frequency = 32768
411[ 0.524908 / 01-01 00:00:00.519][3] socinfo_print: v0.11, id=246, ver=3.1, raw_id=2375, raw_ver=4, hw_plat=8, hw_plat_ver=12
412[ 0.524908 / 01-01 00:00:00.519][3] accessory_chip=0, hw_plat_subtype=0, pmic_model=65545, pmic_die_revision=131072 foundry_id=3 serial_number=477453917 num_pmics=2
413[ 0.524949 / 01-01 00:00:00.519][3] [LGE_POWER] lge power!!!
414[ 0.525220 / 01-01 00:00:00.519][3] gdsc_mmagic_bimc: no parameters
415[ 0.526027 / 01-01 00:00:00.519][3] usb_otg_vreg: no parameters
416[ 0.526111 / 01-01 00:00:00.519][3] reg-fixed-voltage soc:usb-otg-switch: Failed to find supply vin
417[ 0.526215 / 01-01 00:00:00.519][3] reg-fixed-voltage soc:usb-otg-switch: Failed to register regulator: -517
418[ 0.526940 / 01-01 00:00:00.519][3] vgaarb: loaded
419[ 0.528472 / 01-01 00:00:00.519][3] SCSI subsystem initialized
420[ 0.529560 / 01-01 00:00:00.519][3] usbcore: registered new interface driver usbfs
421[ 0.529624 / 01-01 00:00:00.519][3] usbcore: registered new interface driver hub
422[ 0.529780 / 01-01 00:00:00.519][3] usbcore: registered new device driver usb
423[ 0.530263 / 01-01 00:00:00.529][3] soc:usb_nop_phy supply vcc not found, using dummy regulator
424[ 0.530990 / 01-01 00:00:00.529][3] media: Linux media interface: v0.10
425[ 0.531040 / 01-01 00:00:00.529][3] Linux video capture interface: v2.00
426[ 0.550907 / 01-01 00:00:00.549][3] cpufreq: driver msm up and running
427[ 0.551525 / 01-01 00:00:00.549][3] platform soc:qcom,ion:qcom,ion-heap@22: assigned reserved memory node adsp_region
428[ 0.551696 / 01-01 00:00:00.549][3] platform soc:qcom,ion:qcom,ion-heap@27: assigned reserved memory node qseecom_region
429[ 0.551835 / 01-01 00:00:00.549][3] platform soc:qcom,ion:qcom,ion-heap@10: assigned reserved memory node secure_region
430[ 0.552075 / 01-01 00:00:00.549][3] ION heap system created
431[ 0.552171 / 01-01 00:00:00.549][3] ION heap kmalloc created
432[ 0.552182 / 01-01 00:00:00.549][3] ION heap adsp created at 0x00000000ff800000 with size 400000
433[ 0.552192 / 01-01 00:00:00.549][3] ION heap qsecom created at 0x00000000fe400000 with size 1400000
434[ 0.552202 / 01-01 00:00:00.549][3] ION heap secure_display created at 0x00000000f8800000 with size 5c00000
435[ 0.552211 / 01-01 00:00:00.549][3] ION heap secure_heap created
436[ 0.552972 / 01-01 00:00:00.549][3] msm_bus_fabric_init_driver
437[ 0.556144 / 01-01 00:00:00.549][3] msm-bus-type fab-a0noc: Error: Failed to get regulator bus-gdsc:-517
438[ 0.556157 / 01-01 00:00:00.549][3] msm-bus-type fab-a0noc: Error: Failed to get regulator bus-a-gdsc:-517
439[ 0.558941 / 01-01 00:00:00.549][3] msm-bus-type slv-vmem-cfg: Error: Failed to get regulator node-gdsc:-517
440[ 0.559392 / 01-01 00:00:00.549][3] msm-bus-type slv-vmem: Error: Failed to get regulator node-gdsc:-517
441[ 0.564894 / 01-01 00:00:00.559][3] msm-bus-type fab-a0noc: Error: Failed to get regulator aggre0-snoc-axi-no-rate:-517
442[ 0.564909 / 01-01 00:00:00.559][3] msm-bus-type fab-a0noc: Error: Failed to get regulator aggre0-snoc-axi-no-rate:-517
443[ 0.564921 / 01-01 00:00:00.559][3] msm-bus-type fab-a0noc: Error: Failed to get regulator aggre0-snoc-axi-no-rate:-517
444[ 0.565038 / 01-01 00:00:00.559][3] msm-bus-type fab-mnoc: Error: Failed to get regulator mmagic-mdss-axi-no-rate:-517
445[ 0.565063 / 01-01 00:00:00.559][3] msm-bus-type fab-mnoc: Error: Failed to get regulator mmagic-mdss-axi-no-rate:-517
446[ 0.565085 / 01-01 00:00:00.559][3] msm-bus-type fab-mnoc: Error: Failed to get regulator mmagic-mdss-axi-no-rate:-517
447[ 0.565107 / 01-01 00:00:00.559][3] msm-bus-type fab-mnoc: Error: Failed to get regulator mmagic-mdss-axi-no-rate:-517
448[ 0.565129 / 01-01 00:00:00.559][3] msm-bus-type fab-mnoc: Error: Failed to get regulator mmagic-mdss-axi-no-rate:-517
449[ 0.565151 / 01-01 00:00:00.559][3] msm-bus-type fab-mnoc: Error: Failed to get regulator mmagic-mdss-axi-no-rate:-517
450[ 0.565173 / 01-01 00:00:00.559][3] msm-bus-type fab-mnoc: Error: Failed to get regulator mmagic-mdss-axi-no-rate:-517
451[ 0.566602 / 01-01 00:00:00.559][3] qcom,qpnp-power-on qpnp-power-on-2: PMIC@SID0 Power-on reason: Triggered from PON1 (secondary PMIC) and 'warm' boot
452[ 0.566626 / 01-01 00:00:00.559][3] qcom,qpnp-power-on qpnp-power-on-2: PMIC@SID0: Power-off reason: Triggered from UVLO (Under Voltage Lock Out)
453[ 0.566800 / 01-01 00:00:00.559][3] input: qpnp_pon as /devices/virtual/input/input0
454[ 0.567219 / 01-01 00:00:00.559][3] pon_spare_reg: no parameters
455[ 0.567276 / 01-01 00:00:00.559][3] qcom,qpnp-power-on qpnp-power-on-11: No PON config. specified
456[ 0.567332 / 01-01 00:00:00.559][3] qcom,qpnp-power-on qpnp-power-on-11: PMIC@SID2 Power-on reason: Triggered from PON1 (secondary PMIC) and 'warm' boot
457[ 0.567349 / 01-01 00:00:00.559][3] qcom,qpnp-power-on qpnp-power-on-11: PMIC@SID2: Unknown power-off reason
458[ 0.567547 / 01-01 00:00:00.559][3] PMIC@SID0: PM8994 v2.0 options: 0, 0, 2, 2
459[ 0.567639 / 01-01 00:00:00.559][3] PMIC@SID2: PMI8996 v1.1 options: 0, 0, 0, 0
460[ 0.568746 / 01-01 00:00:00.559][3] ipa ipa2_uc_state_check:296 uC interface not initialized
461[ 0.568759 / 01-01 00:00:00.559][3] ipa ipa_sps_irq_control_all:937 EP (2) not allocated.
462[ 0.568765 / 01-01 00:00:00.559][3] ipa ipa_sps_irq_control_all:937 EP (5) not allocated.
463[ 0.570330 / 01-01 00:00:00.569][0] sps:BAM 0x0000000000684000 is registered.
464[ 0.571115 / 01-01 00:00:00.569][3] ipa ipa2_uc_state_check:296 uC interface not initialized
465[ 0.571314 / 01-01 00:00:00.569][3] sps:BAM 0x0000000000684000 (va:0xffffff8000ec0000) enabled: ver:0x27, number of pipes:20
466[ 0.572765 / 01-01 00:00:00.569][3] ipa ipa2_uc_state_check:296 uC interface not initialized
467[ 0.581120 / 01-01 00:00:00.579][3] ipa ipa2_uc_state_check:296 uC interface not initialized
468[ 0.582996 / 01-01 00:00:00.579][3] IPA driver initialization was successful.
469[ 0.584444 / 01-01 00:00:00.579][3] gdsc_mmagic_video: no parameters
470[ 0.584677 / 01-01 00:00:00.579][3] gdsc_mmagic_mdss: no parameters
471[ 0.584844 / 01-01 00:00:00.579][3] gdsc_mmagic_camss: no parameters
472[ 0.585071 / 01-01 00:00:00.579][3] gdsc_venus: no parameters
473[ 0.585093 / 01-01 00:00:00.579][3] gdsc_venus: supplied by gdsc_mmagic_video
474[ 0.585290 / 01-01 00:00:00.579][3] gdsc_venus_core0: fast normal
475[ 0.585474 / 01-01 00:00:00.579][3] gdsc_venus_core1: fast normal
476[ 0.585654 / 01-01 00:00:00.579][3] gdsc_camss_top: no parameters
477[ 0.585680 / 01-01 00:00:00.579][3] gdsc_camss_top: supplied by gdsc_mmagic_camss
478[ 0.585872 / 01-01 00:00:00.579][3] gdsc_vfe0: no parameters
479[ 0.585890 / 01-01 00:00:00.579][3] gdsc_vfe0: supplied by gdsc_camss_top
480[ 0.586059 / 01-01 00:00:00.579][3] gdsc_vfe1: no parameters
481[ 0.586077 / 01-01 00:00:00.579][3] gdsc_vfe1: supplied by gdsc_camss_top
482[ 0.586286 / 01-01 00:00:00.579][3] gdsc_mdss: no parameters
483[ 0.586305 / 01-01 00:00:00.579][3] gdsc_mdss: supplied by gdsc_mmagic_mdss
484[ 0.586602 / 01-01 00:00:00.579][3] gdsc_jpeg: no parameters
485[ 0.586620 / 01-01 00:00:00.579][3] gdsc_jpeg: supplied by gdsc_camss_top
486[ 0.586793 / 01-01 00:00:00.579][3] gdsc_cpp: no parameters
487[ 0.586811 / 01-01 00:00:00.579][3] gdsc_cpp: supplied by gdsc_camss_top
488[ 0.586985 / 01-01 00:00:00.579][3] gdsc_pcie_0: no parameters
489[ 0.587133 / 01-01 00:00:00.579][3] gdsc_pcie_1: no parameters
490[ 0.587295 / 01-01 00:00:00.579][3] gdsc_pcie_2: no parameters
491[ 0.587443 / 01-01 00:00:00.579][3] gdsc_usb30: no parameters
492[ 0.587603 / 01-01 00:00:00.579][3] gdsc_ufs: no parameters
493[ 0.587812 / 01-01 00:00:00.579][3] gdsc_fd: no parameters
494[ 0.587834 / 01-01 00:00:00.579][3] gdsc_fd: supplied by gdsc_camss_top
495[ 0.588014 / 01-01 00:00:00.579][3] gdsc_gpu: no parameters
496[ 0.588200 / 01-01 00:00:00.579][3] gdsc_gpu_gx: no parameters
497[ 0.588565 / 01-01 00:00:00.579][3] gdsc_gpu_gx: supplied by gfx_corner
498[ 0.588775 / 01-01 00:00:00.579][3] gdsc_hlos1_vote_aggre0_noc: no parameters
499[ 0.588915 / 01-01 00:00:00.579][3] gdsc_hlos1_vote_lpass_adsp: no parameters
500[ 0.589077 / 01-01 00:00:00.579][3] gdsc_hlos1_vote_lpass_core: no parameters
501[ 0.589231 / 01-01 00:00:00.579][3] gdsc_aggre0_noc: no parameters
502[ 0.591821 / 01-01 00:00:00.589][3] mdss_pll_probe: MDSS pll label = MDSS DSI 0 PLL
503[ 0.591850 / 01-01 00:00:00.589][3] mdss_pll_probe: mdss_pll_probe: label=MDSS DSI 0 PLL PLL SSC enabled
504[ 0.593126 / 01-01 00:00:00.589][3] dsi_pll_clock_register_8996: Registered DSI PLL ndx=0 clocks successfully
505[ 0.593179 / 01-01 00:00:00.589][3] mdss_pll_probe: MDSS pll label = MDSS DSI 1 PLL
506[ 0.593189 / 01-01 00:00:00.589][3] mdss_pll_probe: mdss_pll_probe: label=MDSS DSI 1 PLL PLL SSC enabled
507[ 0.594276 / 01-01 00:00:00.589][3] pll_is_pll_locked_8996: DSI PLL ndx=1 status=0 failed to Lock
508[ 0.594838 / 01-01 00:00:00.589][3] dsi_pll_clock_register_8996: Registered DSI PLL ndx=1 clocks successfully
509[ 0.594872 / 01-01 00:00:00.589][3] mdss_pll_probe: MDSS pll label = MDSS HDMI PLL
510[ 0.594884 / 01-01 00:00:00.589][3] mdss_pll_probe: Unable to get the cell-index rc=-22
511[ 0.729776 / 01-01 00:00:00.719][3] Advanced Linux Sound Architecture Driver Initialized.
512[ 0.730581 / 01-01 00:00:00.729][0] Bluetooth: ffffffc0f889bd30
513[ 0.730670 / 01-01 00:00:00.729][3] NET: Registered protocol family 31
514[ 0.730681 / 01-01 00:00:00.729][0] Bluetooth: ffffffc0f889bd30
515[ 0.730695 / 01-01 00:00:00.729][3] Bluetooth: ffffffc0f889bd10Bluetooth: ffffffc0f889bcf0
516[ 0.730735 / 01-01 00:00:00.729][3] Bluetooth: ffffffc0f889bcf0[ 0.731131 / 01-01 00:00:00.729][3] cfg80211: Calling CRDA to update world regulatory domain
517[ 0.731165 / 01-01 00:00:00.729][3] cfg80211: World regulatory domain updated:
518[ 0.731175 / 01-01 00:00:00.729][0] cfg80211: DFS Master region: unset
519[ 0.731182 / 01-01 00:00:00.729][3] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
520[ 0.731197 / 01-01 00:00:00.729][3] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
521[ 0.731205 / 01-01 00:00:00.729][3] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
522[ 0.731215 / 01-01 00:00:00.729][3] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A, 2000 mBm), (N/A)
523[ 0.731222 / 01-01 00:00:00.729][3] cfg80211: (5170000 KHz - 5250000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A)
524[ 0.731230 / 01-01 00:00:00.729][3] cfg80211: (5250000 KHz - 5330000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A)
525[ 0.731239 / 01-01 00:00:00.729][3] cfg80211: (5490000 KHz - 5710000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A)
526[ 0.731246 / 01-01 00:00:00.729][3] cfg80211: (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A)
527[ 0.731254 / 01-01 00:00:00.729][3] cfg80211: (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm), (N/A)
528[ 0.731450 / 01-01 00:00:00.729][3] pcie:pcie_init.
529[ 0.731459 / 01-01 00:00:00.729][3] pcie_init: unable to create IPC log context for pcie0-short
530[ 0.731467 / 01-01 00:00:00.729][3] pcie_init: unable to create IPC log context for pcie0-long
531[ 0.731475 / 01-01 00:00:00.729][3] pcie_init: unable to create IPC log context for pcie0-dump
532[ 0.731483 / 01-01 00:00:00.729][3] pcie_init: unable to create IPC log context for pcie1-short
533[ 0.731491 / 01-01 00:00:00.729][3] pcie_init: unable to create IPC log context for pcie1-long
534[ 0.731499 / 01-01 00:00:00.729][3] pcie_init: unable to create IPC log context for pcie1-dump
535[ 0.731507 / 01-01 00:00:00.729][3] pcie_init: unable to create IPC log context for pcie2-short
536[ 0.731514 / 01-01 00:00:00.729][3] pcie_init: unable to create IPC log context for pcie2-long
537[ 0.731521 / 01-01 00:00:00.729][3] pcie_init: unable to create IPC log context for pcie2-dump
538[ 0.733450 / 01-01 00:00:00.729][3] 600000.qcom,pcie supply vreg-3.3 not found, using dummy regulator
539[ 0.736248 / 01-01 00:00:00.729][3] msm_pcie_get_resources: PCIe: RC0 can't get tcsr resource.
540[ 0.739041 / 01-01 00:00:00.729][0] pmi8994_boost_5v: no parameters
541[ 0.739346 / 01-01 00:00:00.729][0] pmi8994_boost_5v: supplied by pon_spare_reg
542[ 0.739805 / 01-01 00:00:00.729][0] pmi8994_boost_pin_ctrl: no parameters
543[ 0.739950 / 01-01 00:00:00.729][0] pmi8994_boost_pin_ctrl: supplied by pon_spare_reg
544[ 0.740534 / 01-01 00:00:00.739][0] register_qpnp_ibb_regulator: [Display] IBB soft start R is set for PMI8996
545[ 0.740791 / 01-01 00:00:00.739][0] ibb_reg: 4600 <--> 6000 mV at 5500 mV
546[ 0.741102 / 01-01 00:00:00.739][0] lab_reg: 4600 <--> 6000 mV at 5500 mV
547[ 0.741790 / 01-01 00:00:00.739][0] usb_otg_vreg: no parameters
548[ 0.741945 / 01-01 00:00:00.739][0] reg-fixed-voltage soc:usb-otg-switch: Failed to find supply vin
549[ 0.742063 / 01-01 00:00:00.739][0] reg-fixed-voltage soc:usb-otg-switch: Failed to register regulator: -517
550[ 0.742903 / 01-01 00:00:00.739][3] Switched to clocksource arch_sys_counter
551[ 0.778018 / 01-01 00:00:00.769][3] [LGE-BATT-ID] lge_battery_id_probe : LG Battery ID probe Start~!!
552[ 0.778051 / 01-01 00:00:00.769][3] [LGE-BATT-ID] lge_battery_id_probe : Battery info : 187
553[ 0.778295 / 01-01 00:00:00.769][3] [LGE-BATT-ID] lge_battery_id_probe : LG Battery ID probe done~!!
554[ 0.778348 / 01-01 00:00:00.769][3] lge_power_changed_work
555[ 0.779853 / 01-01 00:00:00.769][3] [LGE-UEVENT] lge_uevent_probe : LG UEVENT probe Start~!!
556[ 0.780008 / 01-01 00:00:00.769][3] [LGE-UEVENT] lge_uevent_probe : LG UEVENT probe done~!!
557[ 0.780191 / 01-01 00:00:00.779][3] lge_power_changed_work
558[ 0.781055 / 01-01 00:00:00.779][2] bcl_peripheral:bcl_perph_init BCL Initialized
559[ 0.785701 / 01-01 00:00:00.779][3] NET: Registered protocol family 2
560[ 0.786320 / 01-01 00:00:00.779][3] TCP established hash table entries: 32768 (order: 6, 262144 bytes)
561[ 0.786409 / 01-01 00:00:00.779][3] TCP bind hash table entries: 32768 (order: 7, 524288 bytes)
562[ 0.786740 / 01-01 00:00:00.779][3] TCP: Hash tables configured (established 32768 bind 32768)
563[ 0.786884 / 01-01 00:00:00.779][3] TCP: reno registered
564[ 0.786906 / 01-01 00:00:00.779][3] UDP hash table entries: 2048 (order: 4, 65536 bytes)
565[ 0.786935 / 01-01 00:00:00.779][3] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
566[ 0.787275 / 01-01 00:00:00.779][3] NET: Registered protocol family 1
567[ 0.788178 / 01-01 00:00:00.779][0] usb_otg_vreg: no parameters
568[ 0.788317 / 01-01 00:00:00.779][0] reg-fixed-voltage soc:usb-otg-switch: Failed to find supply vin
569[ 0.788413 / 01-01 00:00:00.779][0] reg-fixed-voltage soc:usb-otg-switch: Failed to register regulator: -517
570[ 0.788944 / 01-01 00:00:00.779][3] Trying to unpack rootfs image as initramfs...
571[ 0.896736 / 01-01 00:00:00.889][3] rootfs image is not initramfs (uncompression error); looks like an initrd
572[ 0.912053 / 01-01 00:00:00.909][3] Freeing initrd memory: 6720K (ffffffc002200000 - ffffffc002890000)
573[ 0.914130 / 01-01 00:00:00.909][3] kryo perfevents: CPU pmu for kryo-pmuv3 detected
574[ 0.919819 / 01-01 00:00:00.909][3] futex hash table entries: 1024 (order: 5, 131072 bytes)
575[ 0.919951 / 01-01 00:00:00.909][3] Initialise system trusted keyring
576[ 0.920138 / 01-01 00:00:00.919][3] audit: initializing netlink subsys (disabled)
577[ 0.920253 / 01-01 00:00:00.919][3] audit: type=2000 audit(0.919:1): initialized
578[ 0.924898 / 01-01 00:00:00.919][3] vmscan: error setting kswapd cpu affinity mask
579[ 0.928411 / 01-01 00:00:00.919][3] exFAT: Core Version 1.2.23
580[ 0.928429 / 01-01 00:00:00.919][3] exFAT: FS Version 1.2.23
581[ 0.928784 / 01-01 00:00:00.919][3] Registering sdcardfs 2.1.3-2
582[ 0.928865 / 01-01 00:00:00.919][3] fuse init (API version 7.23)
583[ 0.931427 / 01-01 00:00:00.929][3] Key type asymmetric registered
584[ 0.931445 / 01-01 00:00:00.929][3] Asymmetric key parser 'x509' registered
585[ 0.931617 / 01-01 00:00:00.929][3] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 246)
586[ 0.931631 / 01-01 00:00:00.929][3] io scheduler noop registered
587[ 0.931642 / 01-01 00:00:00.929][3] io scheduler deadline registered
588[ 0.931732 / 01-01 00:00:00.929][3] io scheduler cfq registered (default)
589[ 0.942278 / 01-01 00:00:00.939][3] [LCD][LM3697] lm3697_probe: i2c probe start
590[ 0.942616 / 01-01 00:00:00.939][3] [LM3697] lm3697_parse_dt gpio: 1015, max_current: 19, min: 1, default: 46, max: 255, output_config: 4, brightness_config: 0, sink_feedback: 0, boost_ctrl: 4, pwm : 0
591[ 0.942626 / 01-01 00:00:00.939][3] [LCD][LM3697] lm3697_probe: gpio = 1015
592[ 0.943580 / 01-01 00:00:00.939][3] mdss_mdp_irq_clk_register: unable to get clk: lut_clk
593[ 0.944849 / 01-01 00:00:00.939][3] No change in context(0==0), skip
594[ 0.946038 / 01-01 00:00:00.939][3] mdss_mdp_pipe_addr_setup: type:0 ftchid:-1 xinid:0 num:0 rect:0 ndx:0x1 prio:0
595[ 0.946046 / 01-01 00:00:00.939][3] mdss_mdp_pipe_addr_setup: type:0 ftchid:-1 xinid:4 num:1 rect:0 ndx:0x2 prio:1
596[ 0.946053 / 01-01 00:00:00.939][3] mdss_mdp_pipe_addr_setup: type:0 ftchid:-1 xinid:8 num:2 rect:0 ndx:0x4 prio:2
597[ 0.946060 / 01-01 00:00:00.939][3] mdss_mdp_pipe_addr_setup: type:0 ftchid:-1 xinid:12 num:8 rect:0 ndx:0x100 prio:3
598[ 0.946082 / 01-01 00:00:00.939][3] mdss_mdp_pipe_addr_setup: type:1 ftchid:-1 xinid:1 num:3 rect:0 ndx:0x8 prio:4
599[ 0.946089 / 01-01 00:00:00.939][3] mdss_mdp_pipe_addr_setup: type:1 ftchid:-1 xinid:5 num:4 rect:0 ndx:0x10 prio:5
600[ 0.946096 / 01-01 00:00:00.939][3] mdss_mdp_pipe_addr_setup: type:1 ftchid:-1 xinid:9 num:5 rect:0 ndx:0x20 prio:6
601[ 0.946103 / 01-01 00:00:00.939][3] mdss_mdp_pipe_addr_setup: type:1 ftchid:-1 xinid:13 num:9 rect:0 ndx:0x200 prio:7
602[ 0.946120 / 01-01 00:00:00.939][3] mdss_mdp_pipe_addr_setup: type:2 ftchid:-1 xinid:2 num:6 rect:0 ndx:0x40 prio:8
603[ 0.946127 / 01-01 00:00:00.939][3] mdss_mdp_pipe_addr_setup: type:2 ftchid:-1 xinid:10 num:7 rect:0 ndx:0x80 prio:9
604[ 0.946143 / 01-01 00:00:00.939][3] mdss_mdp_pipe_addr_setup: type:3 ftchid:-1 xinid:7 num:10 rect:0 ndx:0x400 prio:0
605[ 0.946149 / 01-01 00:00:00.939][3] mdss_mdp_pipe_addr_setup: type:3 ftchid:-1 xinid:7 num:11 rect:0 ndx:0x800 prio:1
606[ 0.946160 / 01-01 00:00:00.939][3] mdss_mdp_parse_dt_handler: Error from prop qcom,mdss-pipe-sw-reset-off : u32 array read
607[ 0.946235 / 01-01 00:00:00.939][3] mdss_mdp_parse_dt_handler: Error from prop qcom,mdss-ib-factor-overlap : u32 array read
608[ 0.946598 / 01-01 00:00:00.939][3] xlog_status: enable:1, panic:0, dump:2
609[ 0.946834 / 01-01 00:00:00.939][3] OF: no ranges; cannot translate
610[ 0.946849 / 01-01 00:00:00.939][3] OF: no ranges; cannot translate
611[ 0.947469 / 01-01 00:00:00.939][3] OF: no ranges; cannot translate
612[ 0.947480 / 01-01 00:00:00.939][3] OF: no ranges; cannot translate
613[ 0.947607 / 01-01 00:00:00.939][3] OF: no ranges; cannot translate
614[ 0.947617 / 01-01 00:00:00.939][3] OF: no ranges; cannot translate
615[ 0.947737 / 01-01 00:00:00.939][3] OF: no ranges; cannot translate
616[ 0.947747 / 01-01 00:00:00.939][3] OF: no ranges; cannot translate
617[ 0.947908 / 01-01 00:00:00.939][3] mdss_mdp_probe: mdss version = 0x10070002, bootloader display is on, num 1, intf_sel=0x00000100
618[ 0.953349 / 01-01 00:00:00.949][2] mdss_smmu_probe: iommu v2 domain[0] mapping and clk register successful!
619[ 0.953541 / 01-01 00:00:00.949][2] mdss_smmu_probe: iommu v2 domain[1] mapping and clk register successful!
620[ 0.953662 / 01-01 00:00:00.949][2] mdss_smmu_probe: iommu v2 domain[2] mapping and clk register successful!
621[ 0.953784 / 01-01 00:00:00.949][2] mdss_smmu_probe: iommu v2 domain[3] mapping and clk register successful!
622[ 0.956662 / 01-01 00:00:00.949][2] mdss_dsi_ctrl_probe: DSI Ctrl name = MDSS DSI CTRL->0
623[ 0.957163 / 01-01 00:00:00.949][2] mdss_dsi_find_panel_of_node: cmdline:0:qcom,mdss_dsi_sw49407_dsc_qhd_cmd:config1:1:none:cfg:single_dsi panel_name:qcom,mdss_dsi_sw49407_dsc_qhd_cmd
624[ 0.957180 / 01-01 00:00:00.949][2] mdss_dsi_panel_init: Panel Name = SW49407 cmd mode dsc dsi panel
625[ 0.957189 / 01-01 00:00:00.949][2] mdss_dsi_panel_init: panel_type is LGD_SW49407_CMD_DSC_PANEL
626[ 0.957196 / 01-01 00:00:00.949][2] panel_type is 4
627[ 0.957243 / 01-01 00:00:00.949][2] lge_mdss_panel_parse_dt_blmaps: found lge,blmap
628[ 0.957255 / 01-01 00:00:00.949][2] lge_mdss_panel_parse_dt_blmaps: found lge,blmap-hl
629[ 0.957266 / 01-01 00:00:00.949][2] lge_mdss_panel_parse_dt_blmaps: found lge,blmap-ex
630[ 0.957275 / 01-01 00:00:00.949][2] lge_mdss_panel_parse_dt_blmaps: found lge,blmap-ex-dim
631[ 0.957285 / 01-01 00:00:00.949][2] lge_mdss_panel_parse_dt_blmaps: found lge,blmap-ex-hl
632[ 0.957295 / 01-01 00:00:00.949][2] lge_mdss_panel_parse_dt_blmaps: found lge,blmap-ex-dim-hl
633[ 0.957365 / 01-01 00:00:00.949][2] mdss_dsi_panel_timing_from_dt: found new timing "qcom,mdss_dsi_sw49407_dsc_qhd_cmd" (ffffffc0f889b230)
634[ 0.957384 / 01-01 00:00:00.949][2] mdss_dsi_parse_dcs_cmds: failed, key=qcom,mdss-dsi-vcom-command
635[ 0.957410 / 01-01 00:00:00.949][2] mdss_dsi_parse_dcs_cmds: failed, key=qcom,mdss-dsi-cabc-20-command
636[ 0.957420 / 01-01 00:00:00.949][2] mdss_dsi_parse_dcs_cmds: failed, key=qcom,mdss-dsi-cabc-30-command
637[ 0.957429 / 01-01 00:00:00.949][2] mdss_dsi_parse_dcs_cmds: failed, key=qcom,mdss-dsi-post-panel-on-command
638[ 0.957438 / 01-01 00:00:00.949][2] mdss_dsi_parse_dcs_cmds: failed, key=qcom,mdss-dsi-timing-switch-command
639[ 0.957451 / 01-01 00:00:00.949][2] mdss_dsi_parse_topology_config: cfg_node name config1 lm_split:720x720 pp_split:no
640[ 0.957541 / 01-01 00:00:00.949][2] mdss_dsi_parse_panel_features: partial_update_enabled=1
641[ 0.957554 / 01-01 00:00:00.949][2] mdss_dsi_parse_panel_features: ulps feature enabled
642[ 0.957562 / 01-01 00:00:00.949][0] mdss_dsi_parse_panel_features: ulps during suspend feature enabled
643[ 0.957570 / 01-01 00:00:00.949][2] mdss_dsi_parse_dms_config: dynamic switch feature enabled: 0
644[ 0.957633 / 01-01 00:00:00.949][2] [AOD] init start
645[ 0.957737 / 01-01 00:00:00.949][2] mdss_panel_parse_blex_settings: Configured BL_OTHERS bkltex ctrl
646[ 0.958181 / 01-01 00:00:00.949][2] no supply entry present: lge,extra-supply-entries
647[ 0.958203 / 01-01 00:00:00.949][2] mdss_dsi_parse_ctrl_params:3988 Unable to read qcom,display-id, data= (null),len=20
648[ 0.958241 / 01-01 00:00:00.949][2] mdss_dsi_parse_gpio_params: bklt_en gpio not specified
649[ 0.958281 / 01-01 00:00:00.949][2] lge_mdss_dsi_parse_gpio_params: num_gpios=2
650[ 0.958355 / 01-01 00:00:00.949][2] msm_dss_get_res_byname: 'dsi_phy_regulator' resource not found
651[ 0.958378 / 01-01 00:00:00.949][2] mdss_dsi_retrieve_ctrl_resources+0x168/0x1c4->msm_dss_ioremap_byname: 'dsi_phy_regulator' msm_dss_get_res_byname failed
652[ 0.958385 / 01-01 00:00:00.949][2] mdss_dsi_retrieve_ctrl_resources: ctrl_base=ffffff800198a000 ctrl_size=400 phy_base=ffffff800198c400 phy_size=588
653[ 0.958572 / 01-01 00:00:00.949][3] dsi_panel_device_register: Continuous splash enabled
654[ 0.959198 / 01-01 00:00:00.949][3] mdss_register_panel: adding framebuffer device 994000.qcom,mdss_dsi_ctrl0
655[ 0.959606 / 01-01 00:00:00.949][3] [Display] mdss_dsi_panel_power_ctrl: cur_power_state=0 req_power_state=1
656[ 0.960283 / 01-01 00:00:00.959][3] mdss_dsi_ctrl_probe: Dsi Ctrl->0 initialized, DSI rev:0x10040001, PHY rev:0x2
657[ 0.960485 / 01-01 00:00:00.959][3] mdss_dsi_ctrl 996000.qcom,mdss_dsi_ctrl1: mdss_dsi_ctrl_probe: Cell-index not specified, rc=-22
658[ 0.960507 / 01-01 00:00:00.959][3] mdss_dsi_ctrl: probe of 996000.qcom,mdss_dsi_ctrl1 failed with error -22
659[ 0.961967 / 01-01 00:00:00.959][3] mdss_dsi_status_init: DSI status check interval:5000
660[ 0.962951 / 01-01 00:00:00.959][3] hdmi_tx_get_dt_data: id=0
661[ 0.962962 / 01-01 00:00:00.959][3] hdmi_tx_get_dt_gpio_data: module: 'HDMI_TX_HPD_PM'
662[ 0.962972 / 01-01 00:00:00.959][3] hdmi_tx_get_dt_gpio_data: no gpio
663[ 0.962978 / 01-01 00:00:00.959][3] hdmi_tx_get_dt_gpio_data: module: 'HDMI_TX_DDC_PM'
664[ 0.962985 / 01-01 00:00:00.959][3] hdmi_tx_get_dt_gpio_data: no gpio
665[ 0.962991 / 01-01 00:00:00.959][3] hdmi_tx_get_dt_gpio_data: module: 'HDMI_TX_CORE_PM'
666[ 0.962997 / 01-01 00:00:00.959][3] hdmi_tx_get_dt_gpio_data: no gpio
667[ 0.963003 / 01-01 00:00:00.959][3] hdmi_tx_get_dt_gpio_data: module: 'HDMI_TX_CEC_PM'
668[ 0.963009 / 01-01 00:00:00.959][3] hdmi_tx_get_dt_gpio_data: no gpio
669[ 0.963014 / 01-01 00:00:00.959][3] hdmi_tx_get_dt_vreg_data: module: 'HDMI_TX_HPD_PM'
670[ 0.963030 / 01-01 00:00:00.959][3] hdmi_tx_get_dt_vreg_data: hpd-gdsc min=0, max=0, enable=0 disable=0
671[ 0.963037 / 01-01 00:00:00.959][3] hdmi_tx_get_dt_vreg_data: module: 'HDMI_TX_DDC_PM'
672[ 0.963044 / 01-01 00:00:00.959][3] hdmi_tx_get_dt_vreg_data: no vreg
673[ 0.963050 / 01-01 00:00:00.959][3] hdmi_tx_get_dt_vreg_data: module: 'HDMI_TX_CORE_PM'
674[ 0.963056 / 01-01 00:00:00.959][3] hdmi_tx_get_dt_vreg_data: no vreg
675[ 0.963062 / 01-01 00:00:00.959][3] hdmi_tx_get_dt_vreg_data: module: 'HDMI_TX_CEC_PM'
676[ 0.963069 / 01-01 00:00:00.959][3] hdmi_tx_get_dt_vreg_data: no vreg
677[ 0.963074 / 01-01 00:00:00.959][3] hdmi_tx_get_dt_clk_data: module: 'HDMI_TX_HPD_PM'
678[ 0.963081 / 01-01 00:00:00.959][3] hdmi_tx_get_dt_clk_data: module: 'HDMI_TX_DDC_PM'
679[ 0.963087 / 01-01 00:00:00.959][3] hdmi_tx_get_dt_clk_data: no clk
680[ 0.963092 / 01-01 00:00:00.959][3] hdmi_tx_get_dt_clk_data: module: 'HDMI_TX_CORE_PM'
681[ 0.963098 / 01-01 00:00:00.959][3] hdmi_tx_get_dt_clk_data: module: 'HDMI_TX_CEC_PM'
682[ 0.963104 / 01-01 00:00:00.959][3] hdmi_tx_get_dt_clk_data: no clk
683[ 0.963114 / 01-01 00:00:00.959][3] hdmi_tx_get_dt_data:4581 Unable to read qcom,display-id, data= (null),len=0
684[ 0.963647 / 01-01 00:00:00.959][3] hdmi_tx_init_resource: 'core_physical': start = 0xffffff8001990000, len=0x50c
685[ 0.963658 / 01-01 00:00:00.959][3] hdmi_tx_init_resource: 'qfprom_physical': start = 0xffffff8001998000, len=0x6158
686[ 0.963748 / 01-01 00:00:00.959][3] hdmi_tx_init_resource: 'hdcp_physical': start = 0xffffff8001992000, len=0xfff
687[ 0.964059 / 01-01 00:00:00.959][3] hdmi_tx_check_capability: Features <HDMI:ON, HDCP:ON>
688[ 0.964759 / 01-01 00:00:00.959][3] mdss_register_panel: adding framebuffer device 9a0000.qcom,hdmi_tx
689[ 0.965201 / 01-01 00:00:00.959][3] hdmi_tx_probe: Add child devices.
690[ 0.966907 / 01-01 00:00:00.959][3] mdss_register_panel: adding framebuffer device soc:qcom,mdss_wb_panel
691[ 0.968699 / 01-01 00:00:00.959][3] [MDSS] lge_cd_lpc is not yet ready
692[ 0.968734 / 01-01 00:00:00.959][3] [MDSS] cable 8
693[ 0.968742 / 01-01 00:00:00.959][3] lge,blmap: br_lvl(127) -> bl_lvl(561)
694[ 0.968751 / 01-01 00:00:00.959][3] mdss_fb_probe: fb0: split_mode:1 left:720 right:720
695[ 0.969272 / 01-01 00:00:00.959][3] mdss_fb_register: FrameBuffer[0] 1440x2720 registered successfully!
696[ 0.969626 / 01-01 00:00:00.959][3] mdss_mdp_splash_parse_dt: splash mem child node is not present
697[ 0.969634 / 01-01 00:00:00.959][3] mdss_mdp_splash_parse_dt: no rsvd mem found in DT for splash screen
698[ 0.969640 / 01-01 00:00:00.959][3] mdss_mdp_splash_init: splash memory reserve failed
699[ 0.969656 / 01-01 00:00:00.959][3] vts_register_value_sensor: Register value sensor [led] : weight = 0
700[ 0.969662 / 01-01 00:00:00.959][3] vts_register_value_sensor: Register value sensor [led_sensor] : weight = 1000
701[ 0.969668 / 01-01 00:00:00.959][3] mdss_fb_probe: "led" virtual value sensor is registered.
702[ 0.969703 / 01-01 00:00:00.959][3] mdss_fb_probe: fb1: split_mode:0 left:0 right:0
703[ 0.969770 / 01-01 00:00:00.959][3] mdss_fb_register: FrameBuffer[1] 640x480 registered successfully!
704[ 0.969812 / 01-01 00:00:00.959][3] hdmi_tx_event_handler: event = MDSS_EVENT_FB_REGISTERED suspend=0, hpd_feature=0
705[ 0.969845 / 01-01 00:00:00.959][3] hdmi_tx_sysfs_create: sysfs group ffffffc0759db810
706[ 0.969852 / 01-01 00:00:00.959][3] hdmi_tx_init_panel: panel initialized
707[ 0.969893 / 01-01 00:00:00.959][3] hdmi_tx_init_hdcp: HDCP 1.4 initialized
708[ 0.970104 / 01-01 00:00:00.969][2] hdmi_tx_init_hdcp: HDCP 2.2 initialized
709[ 0.970158 / 01-01 00:00:00.969][2] hdmi_tx_init_audio: audio initialized
710[ 0.974965 / 01-01 00:00:00.969][2] mdss_fb_probe: fb2: split_mode:0 left:0 right:0
711[ 0.975118 / 01-01 00:00:00.969][2] mdss_fb_register: FrameBuffer[2] 640x480 registered successfully!
712[ 0.975220 / 01-01 00:00:00.969][2] mdss_mdp_splash_parse_dt: splash mem child node is not present
713[ 0.978804 / 01-01 00:00:00.969][3] glink_loopback_server_init: unable to create log context
714[ 0.978991 / 01-01 00:00:00.969][3] msm_smp2p_init: unable to create log context
715[ 0.981635 / 01-01 00:00:00.979][0] qmi_log_init: Unable to create QMI IPC logging for Req/Resp
716[ 0.981656 / 01-01 00:00:00.979][3] logging for Indications: Unable to create QMI IPC qmi_log_init[ 0.984870 / 01-01 00:00:00.979][3] apr_init: Unable to create ipc log context
717[ 0.992668 / 01-01 00:00:00.989][3] l2cache-pmu soc:l2-pmu: Registered L2 cache PMU using 2 HW PMUs
718[ 0.993601 / 01-01 00:00:00.989][3] msm_rpm_log_probe: OK
719[ 0.996958 / 01-01 00:00:00.989][3] subsys-pil-tz ce0000.qcom,venus: for venus segments only will be dumped.
720[ 0.997736 / 01-01 00:00:00.989][3] subsys-pil-tz soc:qcom,kgsl-hyp: for a530_zap segments only will be dumped.
721[ 1.000817 / 01-01 00:00:00.999][2] pil-q6v5-mss 2080000.qcom,mss: Failed to find the pas_id.
722[ 1.003187 / 01-01 00:00:00.999][2] bootlog_probe: start 0x32d7
723[ 1.003208 / 01-01 00:00:00.999][2] bootlog_probe: size 0x1fff4
724[ 1.003214 / 01-01 00:00:00.999][2] -------------------------------------------------
725[ 1.003220 / 01-01 00:00:00.999][2] below logs are got from bootloader
726[ 1.003227 / 01-01 00:00:00.999][2] -------------------------------------------------
727[ 1.003232 / 01-01 00:00:00.999][2]
728[ 1.003291 / 01-01 00:00:00.999][2] B - 505476 - DPE_MEMC_STATUS_0: DDR0 0x0000FFFF, DDR1 0x0000FFFF
729[ 1.003330 / 01-01 00:00:00.999][2] B - 505507 - ch 2, cs 1, mr8 0x08080808
730[ 1.003388 / 01-01 00:00:00.999][2] B - 505507 - DPE_MEMC_STATUS_0: DDR0 0x0000FFFF, DDR1 0x0000FFFF
731[ 1.003461 / 01-01 00:00:00.999][2] B - 505751 - ddr_info: SKH ver=21914 ch=0x3 cs=0x3 rev1=0x4 rev2=0x0 mr8=0x8 hwrev=12
732[ 1.003497 / 01-01 00:00:00.999][2] B - 505751 - ddr_trained[36c,0x3]
733[ 1.003536 / 01-01 00:00:00.999][2] B - 505751 - ddr_initialize_device, Delta
734[ 1.003586 / 01-01 00:00:00.999][2] B - 505751 - DDR ID, Rank 0, Rank 1, 0x6, 0x400, 0x400
735[ 1.003623 / 01-01 00:00:00.999][2] B - 505842 - [DDR] remap_size: 4096MB
736[ 1.003673 / 01-01 00:00:00.999][2] B - 505842 - [DDR] remap_info CS0: 0x80000000, CS1: 0x0
737[ 1.003706 / 01-01 00:00:00.999][2] B - 505964 - Basic DDR tests done
738[ 1.003741 / 01-01 00:00:00.999][2] B - 561901 - boot_pre_longkey_check
739[ 1.003777 / 01-01 00:00:00.999][2] B - 561901 - powerkey release state
740[ 1.003809 / 01-01 00:00:00.999][2] B - 569831 - Image Load, Start
741[ 1.003844 / 01-01 00:00:00.999][2] B - 569923 - bootLUN:1, currentLUN:1
742[ 1.003883 / 01-01 00:00:00.999][2] B - 569923 - xbl is matched with bootLUN
743[ 1.003934 / 01-01 00:00:00.999][2] D - 946 - LGE SBL Image Loaded, Delta - (51579 Bytes)
744[ 1.003966 / 01-01 00:00:00.999][2] B - 570807 - clock_init, Start
745[ 1.003997 / 01-01 00:00:00.999][2] B - 571143 - Image Load, Start
746[ 1.004054 / 01-01 00:00:00.999][2] D - 3934 - QSEE Dev Config Image Loaded, Delta - (46200 Bytes)
747[ 1.004085 / 01-01 00:00:00.999][2] B - 575474 - Image Load, Start
748[ 1.004134 / 01-01 00:00:00.999][2] D - 2531 - APDP Image Loaded, Delta - (7768 Bytes)
749[ 1.004165 / 01-01 00:00:00.999][2] B - 592798 - Image Load, Start
750[ 1.004216 / 01-01 00:00:00.999][2] D - 55388 - QSEE Image Loaded, Delta - (1640904 Bytes)
751[ 1.004248 / 01-01 00:00:00.999][2] B - 648186 - Image Load, Start
752[ 1.004286 / 01-01 00:00:00.999][2] B - 648735 - QFPROM flag != QFPROMblown
753[ 1.004333 / 01-01 00:00:00.999][2] D - 518 - SEC Image Loaded, Delta - (4116 Bytes)
754[ 1.004375 / 01-01 00:00:00.999][2] B - 649284 - sbl1_efs_handle_cookies, Start
755[ 1.004416 / 01-01 00:00:00.999][2] D - 122 - sbl1_efs_handle_cookies, Delta
756[ 1.004447 / 01-01 00:00:00.999][2] B - 649406 - Image Load, Start
757[ 1.004497 / 01-01 00:00:00.999][2] D - 12017 - QHEE Image Loaded, Delta - (254192 Bytes)
758[ 1.004528 / 01-01 00:00:00.999][2] B - 661423 - Image Load, Start
759[ 1.004578 / 01-01 00:00:00.999][2] D - 11102 - RPM Image Loaded, Delta - (223932 Bytes)
760[ 1.004610 / 01-01 00:00:00.999][2] B - 672525 - Image Load, Start
761[ 1.004655 / 01-01 00:00:00.999][2] D - 0 - STI Image Loaded, Delta - (0 Bytes)
762[ 1.004685 / 01-01 00:00:00.999][2] B - 673318 - cable type is 8
763[ 1.004740 / 01-01 00:00:00.999][2] B - 848327 - pm_app_smbchg: TA/USB attached, battery present
764[ 1.004786 / 01-01 00:00:00.999][2] B - 848388 - Charger source: SDP before APSD rerun
765[ 1.004835 / 01-01 00:00:00.999][2] B - 849242 - [ADC][mvol=1790][hw_rev_table[12]=[1700]
766[ 1.004880 / 01-01 00:00:00.999][2] B - 857233 - [Display] SW49407_QHD_DSC_CMD_PANEL
767[ 1.004915 / 01-01 00:00:00.999][2] B - 857263 - panel_type = CMD_PANEL
768[ 1.004948 / 01-01 00:00:00.999][2] B - 864583 - Panel power on done
769[ 1.004984 / 01-01 00:00:00.999][2] B - 864583 - soc_version:0x00030001
770[ 1.005017 / 01-01 00:00:00.999][2] B - 909937 - Panel pre init done
771[ 1.005080 / 01-01 00:00:00.999][2] [0] logbuf_relocate_sbl_log: log_start=0x85e11040, log_size=0x815, end_time=0
772[ 1.005100 / 01-01 00:00:00.999][2] [0] welcome to lk
773[ 1.005106 / 01-01 00:00:00.999][2]
774[ 1.005127 / 01-01 00:00:00.999][2] [10] platform_init()
775[ 1.005146 / 01-01 00:00:00.999][2] [10] target_init()
776[ 1.005166 / 01-01 00:00:00.999][2] [10] RPM GLink Init
777[ 1.005199 / 01-01 00:00:00.999][2] [10] Opening RPM Glink Port success
778[ 1.005231 / 01-01 00:00:00.999][2] [10] Opening SSR Glink Port success
779[ 1.005277 / 01-01 00:00:00.999][2] [10] Glink Connection between APPS and RPM established
780[ 1.005324 / 01-01 00:00:00.999][2] [10] Glink Connection between APPS and RPM established
781[ 1.005382 / 01-01 00:00:00.999][2] [20] bootmode_set_board_revision: board revision value is 12 from smem
782[ 1.005411 / 01-01 00:00:00.999][2] [20] HW Rev(12), vol_up gpio(2)
783[ 1.005433 / 01-01 00:00:00.999][2] [30] UFS init success
784[ 1.005471 / 01-01 00:00:00.999][2] [70] SW3800_Authentication [vendor code: 1]
785[ 1.005505 / 01-01 00:00:00.999][2] [110] set_dload_mode: download_mode:0
786[ 1.005543 / 01-01 00:00:00.999][2] [120] [KSwitch] ftm kill switch item value=
787[ 1.005605 / 01-01 00:00:00.999][2] [120] [KSwitch] (kswitch_load_flag): ftm kill switch item has invalid format
788[ 1.005627 / 01-01 00:00:00.999][2] [120] batt_info = 187
789[ 1.005683 / 01-01 00:00:00.999][2] [120] bootmode_set_cable: usb cable type/port type is 8/3 from smem
790[ 1.005702 / 01-01 00:00:00.999][2] [120] get_qem = 0
791[ 1.005744 / 01-01 00:00:00.999][2] [120] [emmc_one_binary] target partition updates
792[ 1.005784 / 01-01 00:00:00.999][2] [120] [emmc_one_binary] userdata partition set
793[ 1.005846 / 01-01 00:00:00.999][2] [120] [emmc_one_binary] card size 63677923328 Byte, card_sec_count 15546368
794[ 1.005876 / 01-01 00:00:00.999][2] [150] PROTECTIVE_MBR_SIZE = 4096
795[ 1.005915 / 01-01 00:00:00.999][2] [150] [emmc_one_binary] backup_lba 15546367
796[ 1.005958 / 01-01 00:00:00.999][2] [150] [emmc_one_binary] Don't need to update GPT.
797[ 1.005989 / 01-01 00:00:00.999][2] [150] Qseecom Init Done in Appsbl
798[ 1.006093 / 01-01 00:00:00.999][2] [150] secure app region addr=0x86600000 size=0x1a00000[150] TZ App region notif returned with status:0 addr:86600000 size:27262976
799[ 1.006159 / 01-01 00:00:00.999][2] [150] TZ App log region register returned with status:0 addr:9191d000 size:4096
800[ 1.006192 / 01-01 00:00:00.999][2] [150] Qseecom TZ Init Done in Appsbl
801[ 1.006217 / 01-01 00:00:00.999][2] [210] Loading cmnlib done
802[ 1.006272 / 01-01 00:00:00.999][2] [210] qseecom_start_app: Loading app keymaster for the first time'
803[ 1.006309 / 01-01 00:00:00.999][2] [240] <8>keymaster: "\"KEYMASTER Init \""
804[ 1.006354 / 01-01 00:00:00.999][2] [240] GPIO 64 Drive stength set to 16mA and gpio_set
805[ 1.006382 / 01-01 00:00:00.999][2] [240] LK SEC APP Handle: 0x1
806[ 1.006430 / 01-01 00:00:00.999][2] [240] <8>keymaster: "\"open_add_km_partition status:0\""
807[ 1.006457 / 01-01 00:00:00.999][2] [250] Device unlock statue 1
808[ 1.006484 / 01-01 00:00:00.999][2] [250] Device unlock count 1
809[ 1.006509 / 01-01 00:00:00.999][2] [250] Device flash count 0
810[ 1.006529 / 01-01 00:00:00.999][2] [250] PIF_DETECT:8
811[ 1.006561 / 01-01 00:00:00.999][2] [250] [Display]backlight level: 793
812[ 1.006581 / 01-01 00:00:00.999][2] [250] PIF_DETECT:8
813[ 1.006613 / 01-01 00:00:00.999][2] [250] [Display]backlight level: 189
814[ 1.006655 / 01-01 00:00:00.999][2] [250] [Display]panel name: sw49407_qhd_dsc_cmd
815[ 1.006686 / 01-01 00:00:00.999][2] [250] [Display]vddio_en_gpio : 69
816[ 1.006722 / 01-01 00:00:00.999][2] [250] oem.panel D : sw49407_qhd_dsc_cmd
817[ 1.006761 / 01-01 00:00:00.999][2] [250] OEM panel override:sw49407_qhd_dsc_cmd
818[ 1.006817 / 01-01 00:00:00.999][2] [250] topology config-1 not supported. fallback to default config1
819[ 1.006845 / 01-01 00:00:00.999][2] [250] panel_operating_mode=0x2
820[ 1.006879 / 01-01 00:00:00.999][2] [260] Return value from recv_data: 14
821[ 1.006912 / 01-01 00:00:00.999][2] [270] Return value from recv_data: 14
822[ 1.006944 / 01-01 00:00:00.999][2] [290] [Display] IBB REVISION4 is 1
823[ 1.006984 / 01-01 00:00:00.999][2] [330] msm_display_init: chargerlogo mode check
824[ 1.007020 / 01-01 00:00:00.999][2] [330] pm8x41_get_is_cold_boot: Warm boot
825[ 1.007070 / 01-01 00:00:00.999][2] [330] target_check_chargerlogo_mode: chargerlogo mode check
826[ 1.007134 / 01-01 00:00:00.999][2] [330] target_check_chargerlogo_mode: cold_boot=0, pon1=32, key=0, cable_type=8
827[ 1.007154 / 01-01 00:00:00.999][2] [390] lglogo_image.
828[ 1.007181 / 01-01 00:00:00.999][2] [390] Config MIPI_CMD_PANEL.
829[ 1.007208 / 01-01 00:00:00.999][2] [530] Turn on MIPI_CMD_PANEL.
830[ 1.007235 / 01-01 00:00:00.999][2] [530] Configure GPIO success
831[ 1.007278 / 01-01 00:00:00.999][2] [540] [Display][lm3697] read reg[0x21] level = 189
832[ 1.007308 / 01-01 00:00:00.999][2] [540] HW Rev(12), vol_up gpio(2)
833[ 1.007347 / 01-01 00:00:00.999][2] [540] target_home_key: should be implemented
834[ 1.007409 / 01-01 00:00:00.999][2] [540] selectmode_get_current_key_info: vol_up=0, vol_down=0, power=0, home=0
835[ 1.007466 / 01-01 00:00:00.999][2] [540] selectmode_check_usb_cable: with usb cable. not factory cable
836[ 1.007511 / 01-01 00:00:00.999][2] [540] target_selectmode_init: selectmode_get_mode()=0
837[ 1.007526 / 01-01 00:00:00.999][2] [540] SM_NONE
838[ 1.007550 / 01-01 00:00:00.999][2] [540] webdload status:0
839[ 1.007576 / 01-01 00:00:00.999][2] [540] dload_reboot status:0
840[ 1.007611 / 01-01 00:00:00.999][2] [540] pm8x41_get_is_cold_boot: Warm boot
841[ 1.007635 / 01-01 00:00:00.999][2] [540] webdload status:0
842[ 1.007667 / 01-01 00:00:00.999][2] [540] LGFTM_LAF_MID_REBOOT_FLAG is 0
843[ 1.007725 / 01-01 00:00:00.999][2] [540] bootcmd_add_pair: value changed from to LG-H918 at model.name
844[ 1.007778 / 01-01 00:00:00.999][2] [540] bootcmd_add_pair: value changed from to rev_10 at lge.rev
845[ 1.007837 / 01-01 00:00:00.999][2] [540] bootcmd_add_pair: value changed from to 400MA at bootcable.type
846[ 1.007897 / 01-01 00:00:00.999][2] [540] bootcmd_add_pair: value changed from to SW3800_VC0 at lge.battid
847[ 1.007949 / 01-01 00:00:00.999][2] [540] bootmode_set_ddr_info: DDR Size info 4294967296 from smem
848[ 1.007996 / 01-01 00:00:00.999][2] [540] bootmode_set_ddr_info: DDR MR info 0x6 from smem
849[ 1.008036 / 01-01 00:00:00.999][2] [540] [CCAudit] Start-up BOOT MODE = recovery
850[ 1.008097 / 01-01 00:00:00.999][2] [540] bootcmd_add_pair: value changed from to recovery at lge.bootreason
851[ 1.008162 / 01-01 00:00:00.999][2] [540] bootcmd_add_pair: value changed from to 0x77665502 at lge.bootreasoncode
852[ 1.008185 / 01-01 00:00:00.999][2] [540] MSM8996 ver : 0x3
853[ 1.008216 / 01-01 00:00:00.999][2] [540] UFS FORCE Reset count : 0x0
854[ 1.008234 / 01-01 00:00:00.999][2] [540] get_qem = 0
855[ 1.008253 / 01-01 00:00:00.999][2] [540] get_qem = 0
856[ 1.008306 / 01-01 00:00:00.999][2] [540] bootmode_set_factory: put cable_type(8) and qem(0) to smem
857[ 1.008344 / 01-01 00:00:00.999][2] [540] CHARGERLOGO: reboot_mode = 0x77665502
858[ 1.008391 / 01-01 00:00:00.999][2] [540] CHARGERLOGO: boot_into_chargerlogo = 0 (Recovery)
859[ 1.008411 / 01-01 00:00:00.999][2] [540] is_update_gpt
860[ 1.008434 / 01-01 00:00:00.999][2] [540] is_update_gpt: 0
861[ 1.008462 / 01-01 00:00:00.999][2] [540] [LAF] boot_into_laf = 0
862[ 1.008501 / 01-01 00:00:00.999][2] [540] Unable to locate /bootselect partition
863[ 1.008537 / 01-01 00:00:00.999][2] [540] [KSwitch] check kill switch feature
864[ 1.008590 / 01-01 00:00:00.999][2] [540] [KSwitch] check done (do nothing): valid=true, flasg=0x0
865[ 1.008613 / 01-01 00:00:00.999][2] [540] now sniffing = 0
866[ 1.008632 / 01-01 00:00:00.999][2] [540] cc mode 0!!!
867[ 1.008682 / 01-01 00:00:00.999][2] [540] bootcmd_add_pair: value changed from to 0 at cc_mode
868[ 1.008712 / 01-01 00:00:00.999][2] [540] get_encrypt_on_minios = 0
869[ 1.008740 / 01-01 00:00:00.999][2] [540] get_encrypt_on_minios = 0
870[ 1.008771 / 01-01 00:00:00.999][2] [540] LGE_DMS - CRC = 0 STAGE= 0
871[ 1.008802 / 01-01 00:00:00.999][2] [540] boot from recovery partition
872[ 1.008827 / 01-01 00:00:00.999][2] [540] Device is unlocked!
873[ 1.008868 / 01-01 00:00:00.999][2] [540] Loading (recovery) image (25784320): start
874[ 1.008909 / 01-01 00:00:00.999][2] [730] Loading (recovery) image (25784320): done
875[ 1.008957 / 01-01 00:00:00.999][2] [730] use_signed_kernel=1, is_unlocked=1, is_tampered=0.
876[ 1.009003 / 01-01 00:00:00.999][2] [730] Authenticating /recovery image (25784320): start
877[ 1.009048 / 01-01 00:00:00.999][2] [730] boot_verifier: Device is in ORANGE boot state.
878[ 1.009089 / 01-01 00:00:00.999][2] [730] boot_verifier: Skipping boot verification.
879[ 1.009134 / 01-01 00:00:00.999][2] [730] boot_verifier: Device is in ORANGE boot state.
880[ 1.009180 / 01-01 00:00:00.999][2] [730] Authenticating boot image: done return value = 0
881[ 1.009223 / 01-01 00:00:00.999][2] [730] [CCAudit] Authenticating boot image: Success
882[ 1.009283 / 01-01 00:00:00.999][2] [730] partition size, image size, round size : 4194304, 4060036, 4063232
883[ 1.009311 / 01-01 00:00:00.999][2] [770] Raw resources verified.
884[ 1.009372 / 01-01 00:00:00.999][2] [770] display_boot_state : verifiedboot_orange_01, verifiedboot_orange_02,
885[ 1.009418 / 01-01 00:00:00.999][2] [810] read_image_info_from_emmc: total_image_num (53)
886[ 1.009468 / 01-01 00:00:00.999][2] [810] get_image_info: Finding image verifiedboot_orange_01
887[ 1.009516 / 01-01 00:00:00.999][2] [810] get_image_info: img_info[0].name quick_lglogo_image
888[ 1.009565 / 01-01 00:00:00.999][2] [810] get_image_info: img_info[1].name load_charger_image
889[ 1.009623 / 01-01 00:00:00.999][2] [810] get_image_info: img_info[2].name battery_insert_nt_module_image
890[ 1.009666 / 01-01 00:00:00.999][2] [810] get_image_info: img_info[3].name NT_TYPE_CM1
891[ 1.009710 / 01-01 00:00:00.999][2] [810] get_image_info: img_info[4].name NT_TYPE_CM2
892[ 1.009753 / 01-01 00:00:00.999][2] [810] get_image_info: img_info[5].name NT_TYPE_CM3
893[ 1.009801 / 01-01 00:00:00.999][2] [810] get_image_info: img_info[6].name NT_TYPE_ERROR_MAX
894[ 1.009849 / 01-01 00:00:00.999][2] [810] get_image_info: img_info[7].name NT_TYPE_ERROR_MIN
895[ 1.009900 / 01-01 00:00:00.999][2] [810] get_image_info: img_info[8].name NT_TYPE_ERROR_UNKNOWN
896[ 1.009950 / 01-01 00:00:00.999][2] [810] get_image_info: img_info[9].name NT_TYPE_EU_AUSTRALIA
897[ 1.010000 / 01-01 00:00:00.999][2] [810] get_image_info: img_info[10].name NT_TYPE_EU_GLOBAL
898[ 1.010113 / 01-01 00:00:01.009][2] [810] get_image_info: img_info[11].name NT_TYPE_HM1
899[ 1.010158 / 01-01 00:00:01.009][2] [810] get_image_info: img_info[12].name NT_TYPE_HM2
900[ 1.010206 / 01-01 00:00:01.009][2] [810] get_image_info: img_info[13].name NT_TYPE_JP_KDDI
901[ 1.010251 / 01-01 00:00:01.009][2] [810] get_image_info: img_info[14].name NT_TYPE_KR_KT
902[ 1.010298 / 01-01 00:00:01.009][2] [810] get_image_info: img_info[15].name NT_TYPE_KR_LGU
903[ 1.010343 / 01-01 00:00:01.009][2] [810] get_image_info: img_info[16].name NT_TYPE_KR_SKT
904[ 1.010390 / 01-01 00:00:01.009][2] [810] get_image_info: img_info[17].name NT_TYPE_NA_ATT
905[ 1.010436 / 01-01 00:00:01.009][2] [810] get_image_info: img_info[18].name NT_TYPE_NA_SPR
906[ 1.010483 / 01-01 00:00:01.009][2] [810] get_image_info: img_info[19].name NT_TYPE_NA_TMUS
907[ 1.010529 / 01-01 00:00:01.009][2] [810] get_image_info: img_info[20].name NT_TYPE_NA_VZW
908[ 1.010578 / 01-01 00:00:01.009][2] [810] get_image_info: img_info[21].name NT_TYPE_RESERVED1
909[ 1.010626 / 01-01 00:00:01.009][2] [810] get_image_info: img_info[22].name NT_TYPE_RESERVED2
910[ 1.010671 / 01-01 00:00:01.009][2] [810] get_image_info: img_info[23].name downloadmode
911[ 1.010720 / 01-01 00:00:01.009][2] [810] get_image_info: img_info[24].name factory_reset_image
912[ 1.010777 / 01-01 00:00:01.009][2] [810] get_image_info: img_info[25].name factory_reset_1st_line_image
913[ 1.010834 / 01-01 00:00:01.009][2] [810] get_image_info: img_info[26].name factory_reset_2nd_line_image
914[ 1.010889 / 01-01 00:00:01.009][2] [810] get_image_info: img_info[27].name factory_reset_no_1st_image
915[ 1.010945 / 01-01 00:00:01.009][2] [810] get_image_info: img_info[28].name factory_reset_yes_1st_image
916[ 1.011000 / 01-01 00:00:01.009][2] [810] get_image_info: img_info[29].name factory_reset_no_2nd_image
917[ 1.011055 / 01-01 00:00:01.009][2] [810] get_image_info: img_info[30].name factory_reset_yes_2nd_image
918[ 1.011102 / 01-01 00:00:01.009][2] [810] get_image_info: img_info[31].name kswitch_factory
919[ 1.011148 / 01-01 00:00:01.009][2] [810] get_image_info: img_info[32].name kswitch_dload
920[ 1.011203 / 01-01 00:00:01.009][2] [810] get_image_info: img_info[33].name system_recovery_menu_image
921[ 1.011262 / 01-01 00:00:01.009][2] [810] get_image_info: img_info[34].name system_recovery_continue_image
922[ 1.011321 / 01-01 00:00:01.009][2] [810] get_image_info: img_info[35].name system_recovery_wipecache_image
923[ 1.011383 / 01-01 00:00:01.009][2] [810] get_image_info: img_info[36].name system_recovery_factoryreset_image
924[ 1.011442 / 01-01 00:00:01.009][2] [810] get_image_info: img_info[37].name system_recovery_powerdown_image
925[ 1.011501 / 01-01 00:00:01.009][2] [810] get_image_info: img_info[38].name system_recovery_safemode_image
926[ 1.011559 / 01-01 00:00:01.009][2] [810] get_image_info: img_info[39].name system_recovery_usbmode_image
927[ 1.011615 / 01-01 00:00:01.009][2] [810] get_image_info: img_info[40].name LGE_PM_NO_BATTERY_QUESTION
928[ 1.011669 / 01-01 00:00:01.009][2] [810] get_image_info: img_info[41].name LGE_PM_NO_BATTERY_EMPTY
929[ 1.011718 / 01-01 00:00:01.009][2] [810] get_image_info: img_info[42].name LGE_PM_NO_CHARGER
930[ 1.011772 / 01-01 00:00:01.009][2] [810] get_image_info: img_info[43].name LGE_PM_WEAK_CHARGING_ON
931[ 1.011819 / 01-01 00:00:01.009][2] [810] get_image_info: img_info[44].name imei_main_image
932[ 1.011867 / 01-01 00:00:01.009][2] [810] get_image_info: img_info[45].name imei_guide_image
933[ 1.011913 / 01-01 00:00:01.009][2] [810] get_image_info: img_info[46].name system_errlogo
934[ 1.011964 / 01-01 00:00:01.009][2] [810] get_image_info: img_info[47].name verifiedboot_red_01
935[ 1.012014 / 01-01 00:00:01.009][2] [810] get_image_info: img_info[48].name verifiedboot_red_02
936[ 1.012066 / 01-01 00:00:01.009][2] [810] get_image_info: img_info[49].name verifiedboot_orange_01
937[ 1.012118 / 01-01 00:00:01.009][2] [870] display_boot_state: decompress time:0 key rel:0 paused:0
938[ 1.012145 / 01-01 00:00:01.009][2] [5960] LK SEC APP Handle: 0x1
939[ 1.012179 / 01-01 00:00:01.009][2] [5960] Input digest : 0x00000001(36)
940[ 1.012217 / 01-01 00:00:01.009][2] [5960] decompressing lz4 kernel image: start
941[ 1.012252 / 01-01 00:00:01.009][2] [6010] decompressing kernel image: done
942[ 1.012323 / 01-01 00:00:01.009][2] [6020] Best match DTB tags 246/00000c08/0x00000000/30001/20009/10013/0/0/929f7b24/562bc
943[ 1.012390 / 01-01 00:00:01.009][2] [6020] Using pmic info 0x20009/0x10013/0x0/0x0 for device 0x20009/0x10113/0x0/0x0
944[ 1.012438 / 01-01 00:00:01.009][2] [6020] dm-verity mode switches to enforcing mode.(1,0,0)
945[ 1.012467 / 01-01 00:00:01.009][2] [6020] => KSUT verifier enabled
946[ 1.012500 / 01-01 00:00:01.009][2] [6020] ksut_global_msm8992 is loaded
947[ 1.012521 / 01-01 00:00:01.009][2] [6020] No unlock key!
948[ 1.012571 / 01-01 00:00:01.009][2] [6020] [CCAudit] Enter the boot_linux for kernel startup,,,
949[ 1.012599 / 01-01 00:00:01.009][2] [6020] bootcmd: lge.rev=rev_10
950[ 1.012630 / 01-01 00:00:01.009][2] [6020] bootcmd: model.name=LG-H918
951[ 1.012665 / 01-01 00:00:01.009][2] [6020] bootcmd: lge.bootreason=recovery
952[ 1.012689 / 01-01 00:00:01.009][2] [6020] bootcmd: cc_mode=0
953[ 1.012712 / 01-01 00:00:01.009][2] [6020] bootcmd: kswitch
954[ 1.012752 / 01-01 00:00:01.009][2] [6020] bootcmd: lge.bootreasoncode=0x77665502
955[ 1.012785 / 01-01 00:00:01.009][2] [6020] bootcmd: bootcable.type=400MA
956[ 1.012818 / 01-01 00:00:01.009][2] [6020] bootcmd: lge.battid=SW3800_VC0
957[ 1.012862 / 01-01 00:00:01.009][2] [6020] bootcmd: androidboot.bl_unlock_complete=true
958[ 1.012898 / 01-01 00:00:01.009][2] [6020] bootcmd: androidboot.dlcomplete=0
959[ 1.012939 / 01-01 00:00:01.009][2] [6020] bootcmd: androidboot.ddr_size=4294967296
960[ 1.012974 / 01-01 00:00:01.009][2] [6020] bootcmd: androidboot.ddr_info=0x6
961[ 1.013008 / 01-01 00:00:01.009][2] [6020] bootcmd: lge.crash_handler=off
962[ 1.013037 / 01-01 00:00:01.009][2] [6020] bootcmd: lge.hreset=off
963[ 1.013064 / 01-01 00:00:01.009][2] [6020] bootcmd: boot_cpus=0-3
964[ 1.013100 / 01-01 00:00:01.009][2] [6020] bootcmd: androidboot.revision=12
965[ 1.013134 / 01-01 00:00:01.009][2] [6020] bootcmd: lge.signed_image=false
966[ 1.013179 / 01-01 00:00:01.009][2] [6020] bootcmd: androidboot.verifiedbootstate=orange
967[ 1.013221 / 01-01 00:00:01.009][2] [6020] bootcmd: androidboot.veritymode=enforcing
968[ 1.013256 / 01-01 00:00:01.009][2] [6020] bootcmd: androidboot.rpmb_state=1
969[ 1.013293 / 01-01 00:00:01.009][2] [6020] pm8x41_get_is_cold_boot: Warm boot
970[ 1.013362 / 01-01 00:00:01.009][2] [6020] target_pause_for_battery_charge : pon_reason is 32 cold_boot:0 charger path: 4
971[ 1.013391 / 01-01 00:00:01.009][2] [6020] PON_PON_PBL_STATUS:0x80
972[ 1.013417 / 01-01 00:00:01.009][2] [6020] PON_PON_REASON1:0x20
973[ 1.013448 / 01-01 00:00:01.009][2] [6020] PON_WARM_RESET_REASON1:0x2
974[ 1.013479 / 01-01 00:00:01.009][2] [6020] PON_WARM_RESET_REASON2:0x0
975[ 1.013505 / 01-01 00:00:01.009][2] [6020] PON_POFF_REASON1:0x0
976[ 1.013532 / 01-01 00:00:01.009][2] [6020] PON_POFF_REASON2:0x20
977[ 1.013563 / 01-01 00:00:01.009][2] [6020] PON_SOFT_RESET_REASON1:0x0
978[ 1.013594 / 01-01 00:00:01.009][2] [6020] PON_SOFT_RESET_REASON2:0x0
979[ 1.013623 / 01-01 00:00:01.009][2] [6020] TEMP_ALARM_STATUS1:0x80
980[ 1.013659 / 01-01 00:00:01.009][2] [6020] SMBCHG_USB_CHGPTH_INT_RT_STS:0x4
981[ 1.013702 / 01-01 00:00:01.009][2] [6020] target_pause_for_battery_charge: normal boot
982[ 1.013739 / 01-01 00:00:01.009][2] [6020] oem.panel D : sw49407_qhd_dsc_cmd
983[ 1.013834 / 01-01 00:00:01.009][2] [6020] display kernel cmdline: mdss_mdp.panel=1:dsi:0:qcom,mdss_dsi_sw49407_dsc_qhd_cmd:config1:1:none:cfg:single_dsi
984[ 1.013870 / 01-01 00:00:01.009][2] [6020] pm8x41_get_is_cold_boot: Warm boot
985[ 1.014111 / 01-01 00:00:01.009][2] [6020] cmdline: console=ttyHSL0,115200,n8 androidboot.console=ttyHSL0 user_debug=31 ehci-hcd.park=3 lpm_levels.sleep_disabled=1 cma=32M@0-0xffffffff androidboot.hardware=elsa androidboot.bootdevice=624000.ufshc androidboot.selinux=permissive lge.rev=rev_10 model[6020] bootcmd_list_deinit : remove all bootcmd_arg
986[ 1.014143 / 01-01 00:00:01.009][2] [6020] Updating device tree: start
987[ 1.014174 / 01-01 00:00:01.009][2] [6030] Updating device tree: done
988[ 1.014210 / 01-01 00:00:01.009][2] [6030] oem.panel D : sw49407_qhd_dsc_cmd
989[ 1.014239 / 01-01 00:00:01.009][2] [6030] Turn off MIPI_CMD_PANEL.
990[ 1.014285 / 01-01 00:00:01.009][2] [6030] Continuous splash enabled, keeping panel alive.
991[ 1.014309 / 01-01 00:00:01.009][2] [6030] RPM GLINK UnInit
992[ 1.014342 / 01-01 00:00:01.009][2] [6030] Qseecom De-Init Done in Appsbl
993[ 1.014420 / 01-01 00:00:01.009][2] [6030] booting linux @ 0x80080000, ramdisk @ 0x82200000 (6883616), tags/device tree @ 0x82000000
994[ 1.014452 / 01-01 00:00:01.009][2] [6030] Jumping to kernel via monitor
995[ 1.014458 / 01-01 00:00:01.009][2]
996[ 1.014464 / 01-01 00:00:01.009][2] bootlog_probe: token (null)
997[ 1.014470 / 01-01 00:00:01.009][2] -------------------------------------------------
998[ 1.014481 / 01-01 00:00:01.009][2] Trying to free nonexistent resource <00000000c00c0000-00000000c00dffff>
999[ 1.015895 / 01-01 00:00:01.009][3] [UART CONSOLE][earjack_debugger_probe] disable uart console
1000[ 1.015918 / 01-01 00:00:01.009][3] earjack debugger probed
1001[ 1.018518 / 01-01 00:00:01.009][3] LGE GPIO debugger init done
1002[ 1.018806 / 01-01 00:00:01.009][3] [QFUSE]lge_qfprom_probe : qfprom init
1003[ 1.020477 / 01-01 00:00:01.019][3] [LGE-ADC] lge_adc_qct_probe : lge_battery_probe starts!!!
1004[ 1.020631 / 01-01 00:00:01.019][3] [LGE-ADC] lge_adc_qct_probe : Not yet initializing pm-vadc
1005[ 1.021642 / 01-01 00:00:01.019][3] [LGE-CD] cable_detect_probe : lge_cable_detect probe start!
1006[ 1.021687 / 01-01 00:00:01.019][3] [LGE-CD] cable_detect_probe : lge_adc property failed to get
1007[ 1.022634 / 01-01 00:00:01.019][3] [LGE-CC] lge_charging_controller_probe : LG Charging controller probe done~!!
1008[ 1.022668 / 01-01 00:00:01.019][3] lge_power_changed_work
1009[ 1.023569 / 01-01 00:00:01.019][3] [LGE-HW_REV] lge_hw_rev_probe : Probe Start~!!
1010[ 1.023584 / 01-01 00:00:01.019][3] [LGE-HW_REV] lge_hw_rev_probe : HW_REV : rev_10
1011[ 1.023670 / 01-01 00:00:01.019][3] [LGE-HW_REV] lge_hw_rev_probe : Probe done~!!
1012[ 1.023687 / 01-01 00:00:01.019][3] lge_power_changed_work
1013[ 1.024542 / 01-01 00:00:01.019][3] [LGE-SM] lge_store_mode_probe : LG Store mode probe Start~!!
1014[ 1.024647 / 01-01 00:00:01.019][3] [LGE-SM] lge_store_mode_probe : LG store mode probe done~!!
1015[ 1.024664 / 01-01 00:00:01.019][3] lge_power_changed_work
1016[ 1.024997 / 01-01 00:00:01.019][0] msm_serial_hs_init: error creating logging context
1017[ 1.026757 / 01-01 00:00:01.019][3] sps: BAM device 0x0000000007544000 is not registered yet.
1018[ 1.026789 / 01-01 00:00:01.019][0] sps:BAM 0x0000000007544000 is registered.
1019[ 1.028038 / 01-01 00:00:01.019][3] 7570000.uart: ttyHS0 at MMIO 0x7570000 (irq = 18, base_baud = 460800) is a MSM HS UART
1020[ 1.031031 / 01-01 00:00:01.029][3] msm_serial_hsl_probe: detected port #0 (ttyHSL0)
1021[ 1.031093 / 01-01 00:00:01.029][3] AXI: get_pdata(): Error: Client name not found
1022[ 1.031101 / 01-01 00:00:01.029][3] AXI: msm_bus_cl_get_pdata(): client has to provide missing entry for successful registration
1023[ 1.031108 / 01-01 00:00:01.029][3] msm_serial_hsl_probe: Bus scaling is disabled
1024[ 1.031234 / 01-01 00:00:01.029][3] 75b0000.serial: ttyHSL0 at MMIO 0x75b0000 (irq = 12, base_baud = 460800) is a MSM
1025[ 1.031327 / 01-01 00:00:01.029][3] msm_hsl_console_setup: console setup on port #0
1026[ 1.033414 / 01-01 00:00:01.029][3] console [ttyHSL0] enabled
1027[ 1.034405 / 01-01 00:00:01.029][3] msm_serial_hsl_probe: detected port #1 (ttyHSL1)
1028[ 1.034500 / 01-01 00:00:01.029][3] AXI: get_pdata(): Error: Client name not found
1029[ 1.034507 / 01-01 00:00:01.029][3] AXI: msm_bus_cl_get_pdata(): client has to provide missing entry for successful registration
1030[ 1.034513 / 01-01 00:00:01.029][3] msm_serial_hsl_probe: Bus scaling is disabled
1031[ 1.034616 / 01-01 00:00:01.029][3] 7574000.serial: ttyHSL1 at MMIO 0x7574000 (irq = 414, base_baud = 460800) is a MSM
1032[ 1.035041 / 01-01 00:00:01.029][3] msm_serial_hsl_init: driver initialized
1033[ 1.035069 / 01-01 00:00:01.029][0] smd_tty_log_init: Unable to create IPC log
1034[ 1.039702 / 01-01 00:00:01.029][3] diag: Failed to create IPC logging context
1035[ 1.044879 / 01-01 00:00:01.039][3] mts_tty_init success
1036[ 1.044905 / 01-01 00:00:01.039][3] DM_APP: lge_dm_tty_init
1037[ 1.044975 / 01-01 00:00:01.039][3] lge_bypass_init
1038[ 1.045014 / 01-01 00:00:01.039][3] lge_bypass_init: success
1039[ 1.060252 / 01-01 00:00:01.059][3] brd: module loaded
1040[ 1.061470 / 01-01 00:00:01.059][3] loop: module loaded
1041[ 1.061645 / 01-01 00:00:01.059][3] zram: Created 1 device(s)
1042[ 1.062651 / 01-01 00:00:01.059][3] QSEECOM: qseecom_probe: qseecom.qsee_version = 0x1000000
1043[ 1.062692 / 01-01 00:00:01.059][0] QSEECOM: qseecom_retrieve_ce_data: Device does not support PFE
1044[ 1.062701 / 01-01 00:00:01.059][3] QSEECOM: qseecom_probe: no-clock-support=0x1[ 1.062711 / 01-01 00:00:01.059][3] QSEECOM: qseecom_probe: qseecom.qsee_reentrancy_support = 2
1045[ 1.066428 / 01-01 00:00:01.059][3] IrRC: uei,reset-gpio: 995
1046[ 1.066879 / 01-01 00:00:01.059][3] i2c-core: driver [tabla-i2c-core] using legacy suspend method
1047[ 1.066888 / 01-01 00:00:01.059][3] i2c-core: driver [tabla-i2c-core] using legacy resume method
1048[ 1.066937 / 01-01 00:00:01.059][3] i2c-core: driver [wcd9xxx-i2c-core] using legacy suspend method
1049[ 1.066944 / 01-01 00:00:01.059][3] i2c-core: driver [wcd9xxx-i2c-core] using legacy resume method
1050[ 1.066995 / 01-01 00:00:01.059][3] i2c-core: driver [tasha-i2c-core] using legacy suspend method
1051[ 1.067001 / 01-01 00:00:01.059][3] i2c-core: driver [tasha-i2c-core] using legacy resume method
1052[ 1.068645 / 01-01 00:00:01.059][3] Loading PN547 driver
1053[ 1.068719 / 01-01 00:00:01.059][0] pn547: Start async init
1054[ 1.069836 / 01-01 00:00:01.059][0] pn547: pn547_probe() start
1055[ 1.070236 / 01-01 00:00:01.069][0] pn547:IRQ : 9
1056[ 1.070236 / 01-01 00:00:01.069][0] VEN : 12
1057[ 1.070236 / 01-01 00:00:01.069][0] FIRM : 11
1058[ 1.070403 / 01-01 00:00:01.069][0] pn547_probe : requesting IRQ 273
1059[ 1.070527 / 01-01 00:00:01.069][0] pn547: pn547_probe() end
1060[ 1.070602 / 01-01 00:00:01.069][0] pn547: Loading PN547 driver Success!
1061[ 1.071064 / 01-01 00:00:01.069][3] qce 660000.qcedev: Qualcomm Crypto 5.3.1 device found @0x660000
1062[ 1.071077 / 01-01 00:00:01.069][3] qce 660000.qcedev: CE device = 0x0
1063[ 1.071077 / 01-01 00:00:01.069][3] , IO base, CE = 0xffffff8003a80000
1064[ 1.071077 / 01-01 00:00:01.069][3] , Consumer (IN) PIPE 2, Producer (OUT) PIPE 3
1065[ 1.071077 / 01-01 00:00:01.069][3] IO base BAM = 0x (null)
1066[ 1.071077 / 01-01 00:00:01.069][3] BAM IRQ 156
1067[ 1.071077 / 01-01 00:00:01.069][3] Engines Availability = 0x2011053
1068[ 1.071126 / 01-01 00:00:01.069][0] sps:BAM 0x0000000000644000 is registered.
1069[ 1.071291 / 01-01 00:00:01.069][3] sps:BAM 0x0000000000644000 (va:0xffffff8003b00000) enabled: ver:0x27, number of pipes:16
1070[ 1.071306 / 01-01 00:00:01.069][3] sps:BAM 0x0000000000644000 pipe 3 sharing violation
1071[ 1.071314 / 01-01 00:00:01.069][0] sps:Failed to connect BAM 0xffffffc033febc00 pipe 3
1072[ 1.071323 / 01-01 00:00:01.069][3] QCE50: qce_sps_init_ep_conn: sps_connect() fail pipe_handle=0xffffffc033fec000, rc = -1
1073[ 1.071346 / 01-01 00:00:01.069][0] sps:De-init client in connected state: 0x1535053
1074[ 1.071401 / 01-01 00:00:01.069][3] qce: probe of 660000.qcedev failed with error -1
1075[ 1.073558 / 01-01 00:00:01.069][3] qcrypto 660000.qcrypto: Qualcomm Crypto 5.3.1 device found @0x660000
1076[ 1.073578 / 01-01 00:00:01.069][3] qcrypto 660000.qcrypto: CE device = 0x0
1077[ 1.073578 / 01-01 00:00:01.069][3] , IO base, CE = 0xffffff8003b40000
1078[ 1.073578 / 01-01 00:00:01.069][3] , Consumer (IN) PIPE 4, Producer (OUT) PIPE 5
1079[ 1.073578 / 01-01 00:00:01.069][3] IO base BAM = 0x (null)
1080[ 1.073578 / 01-01 00:00:01.069][3] BAM IRQ 156
1081[ 1.073578 / 01-01 00:00:01.069][3] Engines Availability = 0x2011053
1082[ 1.073625 / 01-01 00:00:01.069][0] sps:BAM 0x0000000000644000 is registered.
1083[ 1.073765 / 01-01 00:00:01.069][3] sps:BAM 0x0000000000644000 (va:0xffffff8003bc0000) enabled: ver:0x27, number of pipes:16
1084[ 1.073978 / 01-01 00:00:01.069][3] QCE50: qce_sps_init: Qualcomm MSM CE-BAM at 0x0000000000644000 irq 156
1085[ 1.079822 / 01-01 00:00:01.069][3] qcrypto 660000.qcrypto: qcrypto-ecb-aes
1086[ 1.079962 / 01-01 00:00:01.069][3] qcrypto 660000.qcrypto: qcrypto-cbc-aes
1087[ 1.080069 / 01-01 00:00:01.079][3] qcrypto 660000.qcrypto: qcrypto-ctr-aes
1088[ 1.080150 / 01-01 00:00:01.079][3] qcrypto 660000.qcrypto: qcrypto-ecb-des
1089[ 1.080227 / 01-01 00:00:01.079][3] qcrypto 660000.qcrypto: qcrypto-cbc-des
1090[ 1.080302 / 01-01 00:00:01.079][3] qcrypto 660000.qcrypto: qcrypto-ecb-3des
1091[ 1.080380 / 01-01 00:00:01.079][3] qcrypto 660000.qcrypto: qcrypto-cbc-3des
1092[ 1.080460 / 01-01 00:00:01.079][3] qcrypto 660000.qcrypto: qcrypto-xts-aes
1093[ 1.080536 / 01-01 00:00:01.079][3] qcrypto 660000.qcrypto: qcrypto-sha1
1094[ 1.080612 / 01-01 00:00:01.079][3] qcrypto 660000.qcrypto: qcrypto-sha256
1095[ 1.080688 / 01-01 00:00:01.079][3] qcrypto 660000.qcrypto: qcrypto-aead-hmac-sha1-cbc-aes
1096[ 1.080764 / 01-01 00:00:01.079][3] qcrypto 660000.qcrypto: qcrypto-aead-hmac-sha1-cbc-des
1097[ 1.080841 / 01-01 00:00:01.079][3] qcrypto 660000.qcrypto: qcrypto-aead-hmac-sha1-cbc-3des
1098[ 1.080922 / 01-01 00:00:01.079][3] qcrypto 660000.qcrypto: qcrypto-aead-hmac-sha256-cbc-aes
1099[ 1.080997 / 01-01 00:00:01.079][3] qcrypto 660000.qcrypto: qcrypto-aead-hmac-sha256-cbc-des
1100[ 1.081074 / 01-01 00:00:01.079][3] qcrypto 660000.qcrypto: qcrypto-aead-hmac-sha256-cbc-3des
1101[ 1.081161 / 01-01 00:00:01.079][3] qcrypto 660000.qcrypto: qcrypto-hmac-sha1
1102[ 1.081236 / 01-01 00:00:01.079][3] qcrypto 660000.qcrypto: qcrypto-hmac-sha256
1103[ 1.081314 / 01-01 00:00:01.079][3] qcrypto 660000.qcrypto: qcrypto-aes-ccm
1104[ 1.081391 / 01-01 00:00:01.079][3] qcrypto 660000.qcrypto: qcrypto-rfc4309-aes-ccm
1105[ 1.084104 / 01-01 00:00:01.079][3] ICE IRQ = 26
1106[ 1.084241 / 01-01 00:00:01.079][3] qcom_ice_get_device_tree_data: No vdd-hba-supply regulator, assuming not needed
1107[ 1.084294 / 01-01 00:00:01.079][3] ICE IRQ = 27
1108[ 1.089574 / 01-01 00:00:01.079][3] qcom_ice_get_pdevice: found ice device ffffffc033fbb000
1109[ 1.089601 / 01-01 00:00:01.079][3] qcom_ice_get_pdevice: matching platform device ffffffc0f8307400
1110[ 1.090114 / 01-01 00:00:01.089][3] scm_call failed: func id 0x42000c02, arginfo: 0x2, args: 0x13, 0x0, 0x0, 0x0, ret: -2, syscall returns: 0xfffffffffffffffc, 0x0, 0x0
1111[ 1.090734 / 01-01 00:00:01.089][3] ufs_qcom_phy_qmp_14nm 627000.ufsphy: failed to get tx_iface_clk err -2
1112[ 1.090744 / 01-01 00:00:01.089][3] ufs_qcom_phy_qmp_14nm 627000.ufsphy: failed to get rx_iface_clk err -2
1113[ 1.091706 / 01-01 00:00:01.089][3] scsi host0: ufshcd
1114[ 1.095324 / 01-01 00:00:01.089][3] qcom_ice 630000.ufsice: QC ICE 2.1.44 device found @0xffffff8001ff0000
1115[ 1.111876 / 01-01 00:00:01.109][3] SCSI Media Changer driver v0.25
1116[ 1.115960 / 01-01 00:00:01.109][3] sps: BAM device 0x0000000007584000 is not registered yet.
1117[ 1.115998 / 01-01 00:00:01.109][0] sps:BAM 0x0000000007584000 is registered.
1118[ 1.117820 / 01-01 00:00:01.109][3] spi_master spi12: will run message pump with realtime priority
1119[ 1.119436 / 01-01 00:00:01.109][3] sps:BAM 0x0000000007584000 (va:0xffffff8003c40000) enabled: ver:0x19, number of pipes:24
1120[ 1.120362 / 01-01 00:00:01.119][3] tun: Universal TUN/TAP device driver, 1.6
1121[ 1.120371 / 01-01 00:00:01.119][3] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
1122[ 1.120441 / 01-01 00:00:01.119][3] PPP generic driver version 2.4.2
1123[ 1.120514 / 01-01 00:00:01.119][3] PPP BSD Compression module registered
1124[ 1.120525 / 01-01 00:00:01.119][3] PPP Deflate Compression module registered
1125[ 1.120565 / 01-01 00:00:01.119][3] PPP MPPE Compression module registered
1126[ 1.120577 / 01-01 00:00:01.119][3] NET: Registered protocol family 24
1127[ 1.122165 / 01-01 00:00:01.119][3] dhd_init_wlan_mem: WIFI MEM Allocated
1128[ 1.122183 / 01-01 00:00:01.119][3] bcm_wifi_init_mem successfully
1129[ 1.122193 / 01-01 00:00:01.119][3] bcm_wifi_init_gpio: target does not use pinctrl for wifi reg on
1130[ 1.122343 / 01-01 00:00:01.119][3] bcm_wifi_init_gpio: gpio_wlan_power=1011
1131[ 1.122505 / 01-01 00:00:01.119][3] bcm_wifi_init_gpio: gpio_hostwake=73
1132[ 1.140108 / 01-01 00:00:01.139][3] bcm_wifi_init_gpio successfully
1133[ 1.140116 / 01-01 00:00:01.139][3] skip bcm_wifi_power up here
1134[ 1.140812 / 01-01 00:00:01.139][3] usbcore: registered new interface driver catc
1135[ 1.140823 / 01-01 00:00:01.139][3] pegasus: v0.9.3 (2013/04/25), Pegasus/Pegasus II USB Ethernet driver
1136[ 1.140847 / 01-01 00:00:01.139][3] usbcore: registered new interface driver pegasus
1137[ 1.140873 / 01-01 00:00:01.139][3] usbcore: registered new interface driver rtl8150
1138[ 1.140898 / 01-01 00:00:01.139][3] usbcore: registered new interface driver r8152
1139[ 1.140907 / 01-01 00:00:01.139][3] hso: ../drivers/net/usb/hso.c: Option Wireless
1140[ 1.140961 / 01-01 00:00:01.139][3] usbcore: registered new interface driver hso
1141[ 1.140991 / 01-01 00:00:01.139][3] usbcore: registered new interface driver asix
1142[ 1.141017 / 01-01 00:00:01.139][3] usbcore: registered new interface driver ax88179_178a
1143[ 1.141042 / 01-01 00:00:01.139][3] usbcore: registered new interface driver cdc_ether
1144[ 1.141066 / 01-01 00:00:01.139][3] usbcore: registered new interface driver cdc_eem
1145[ 1.141092 / 01-01 00:00:01.139][3] usbcore: registered new interface driver dm9601
1146[ 1.141118 / 01-01 00:00:01.139][3] usbcore: registered new interface driver sr9700
1147[ 1.141148 / 01-01 00:00:01.139][3] usbcore: registered new interface driver CoreChips
1148[ 1.141179 / 01-01 00:00:01.139][3] usbcore: registered new interface driver smsc75xx
1149[ 1.141210 / 01-01 00:00:01.139][3] usbcore: registered new interface driver smsc95xx
1150[ 1.141238 / 01-01 00:00:01.139][3] usbcore: registered new interface driver gl620a
1151[ 1.141263 / 01-01 00:00:01.139][3] usbcore: registered new interface driver net1080
1152[ 1.141287 / 01-01 00:00:01.139][3] usbcore: registered new interface driver plusb
1153[ 1.141311 / 01-01 00:00:01.139][3] usbcore: registered new interface driver rndis_host
1154[ 1.141338 / 01-01 00:00:01.139][3] usbcore: registered new interface driver cdc_subset
1155[ 1.141362 / 01-01 00:00:01.139][3] usbcore: registered new interface driver zaurus
1156[ 1.141390 / 01-01 00:00:01.139][3] usbcore: registered new interface driver MOSCHIP usb-ethernet driver
1157[ 1.141586 / 01-01 00:00:01.139][3] usbcore: registered new interface driver int51x1
1158[ 1.141612 / 01-01 00:00:01.139][3] usbcore: registered new interface driver kalmia
1159[ 1.141637 / 01-01 00:00:01.139][3] usbcore: registered new interface driver ipheth
1160[ 1.141664 / 01-01 00:00:01.139][3] usbcore: registered new interface driver sierra_net
1161[ 1.141691 / 01-01 00:00:01.139][3] usbcore: registered new interface driver cx82310_eth
1162[ 1.141721 / 01-01 00:00:01.139][3] usbcore: registered new interface driver cdc_ncm
1163[ 1.141746 / 01-01 00:00:01.139][3] usbcore: registered new interface driver lg-vl600
1164[ 1.141771 / 01-01 00:00:01.139][3] usbcore: registered new interface driver qmi_wwan
1165[ 1.141796 / 01-01 00:00:01.139][3] usbcore: registered new interface driver cdc_mbim
1166[ 1.142414 / 01-01 00:00:01.139][3] msm_sharedmem: sharedmem_register_qmi: qmi init successful
1167[ 1.144991 / 01-01 00:00:01.139][2] msm_sharedmem: msm_sharedmem_probe: Device created for client 'rmtfs'
1168[ 1.153150 / 01-01 00:00:01.149][0] ufshcd 624000.ufshc: ufshcd_print_pwr_info:[RX, TX]: gear=[1, 1], lane[1, 1], pwr[SLOWAUTO_MODE, SLOWAUTO_MODE], rate = 0
1169[ 1.153200 / 01-01 00:00:01.149][3] msm-dwc3 6a00000.ssusb: unable to get dbm device
1170[ 1.156621 / 01-01 00:00:01.149][3] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
1171[ 1.156648 / 01-01 00:00:01.149][3] ehci-pci: EHCI PCI platform driver
1172[ 1.156784 / 01-01 00:00:01.149][3] usbcore: registered new interface driver cdc_acm
1173[ 1.156791 / 01-01 00:00:01.149][3] cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters
1174[ 1.156820 / 01-01 00:00:01.149][3] usbcore: registered new interface driver cdc_wdm
1175[ 1.156847 / 01-01 00:00:01.149][3] usbcore: registered new interface driver uas
1176[ 1.156888 / 01-01 00:00:01.149][3] usbcore: registered new interface driver usb-storage
1177[ 1.156913 / 01-01 00:00:01.149][3] usbcore: registered new interface driver ums-alauda
1178[ 1.156941 / 01-01 00:00:01.149][3] usbcore: registered new interface driver ums-cypress
1179[ 1.156964 / 01-01 00:00:01.149][3] usbcore: registered new interface driver ums-datafab
1180[ 1.156987 / 01-01 00:00:01.149][3] usbcore: registered new interface driver ums-freecom
1181[ 1.157010 / 01-01 00:00:01.149][3] usbcore: registered new interface driver ums-isd200
1182[ 1.157033 / 01-01 00:00:01.149][3] usbcore: registered new interface driver ums-jumpshot
1183[ 1.157055 / 01-01 00:00:01.149][3] usbcore: registered new interface driver ums-karma
1184[ 1.157077 / 01-01 00:00:01.149][3] usbcore: registered new interface driver ums-onetouch
1185[ 1.157104 / 01-01 00:00:01.149][3] usbcore: registered new interface driver ums-realtek
1186[ 1.157128 / 01-01 00:00:01.149][3] usbcore: registered new interface driver ums-sddr09
1187[ 1.157151 / 01-01 00:00:01.149][3] usbcore: registered new interface driver ums-sddr55
1188[ 1.157172 / 01-01 00:00:01.149][3] usbcore: registered new interface driver ums-usbat
1189[ 1.157251 / 01-01 00:00:01.149][3] usbcore: registered new interface driver usbserial
1190[ 1.157274 / 01-01 00:00:01.149][3] usbcore: registered new interface driver usbserial_generic
1191[ 1.157293 / 01-01 00:00:01.149][3] usbserial: USB Serial support registered for generic
1192[ 1.157316 / 01-01 00:00:01.149][3] usbcore: registered new interface driver ftdi_sio
1193[ 1.157335 / 01-01 00:00:01.149][3] usbserial: USB Serial support registered for FTDI USB Serial Device
1194[ 1.157358 / 01-01 00:00:01.149][3] usbcore: registered new interface driver pl2303
1195[ 1.157375 / 01-01 00:00:01.149][3] usbserial: USB Serial support registered for pl2303
1196[ 1.157400 / 01-01 00:00:01.149][3] usbcore: registered new interface driver usb_ehset_test
1197[ 1.158142 / 01-01 00:00:01.149][3] anx7688-usbc 6-0028: usb supply not found, deferring probe
1198[ 1.158920 / 01-01 00:00:01.149][3] gbridge_init: gbridge_init successs.
1199[ 1.158930 / 01-01 00:00:01.149][3] u_lgeusb init
1200[ 1.160380 / 01-01 00:00:01.159][3] mousedev: PS/2 mouse device common for all mice
1201[ 1.160627 / 01-01 00:00:01.159][3] usbcore: registered new interface driver appletouch
1202[ 1.160667 / 01-01 00:00:01.159][3] usbcore: registered new interface driver bcm5974
1203[ 1.160697 / 01-01 00:00:01.159][3] usbcore: registered new interface driver synaptics_usb
1204[ 1.160724 / 01-01 00:00:01.159][3] usbcore: registered new interface driver iforce
1205[ 1.160758 / 01-01 00:00:01.159][3] usbcore: registered new interface driver xpad
1206[ 1.160785 / 01-01 00:00:01.159][3] usbcore: registered new interface driver usb_acecad
1207[ 1.160812 / 01-01 00:00:01.159][3] usbcore: registered new interface driver aiptek
1208[ 1.160838 / 01-01 00:00:01.159][3] usbcore: registered new interface driver gtco
1209[ 1.160864 / 01-01 00:00:01.159][3] usbcore: registered new interface driver hanwang
1210[ 1.160887 / 01-01 00:00:01.159][3] usbcore: registered new interface driver kbtab
1211[ 1.162366 / 01-01 00:00:01.159][3] [Touch] touch_device_init, sic4945 start
1212[ 1.162430 / 01-01 00:00:01.159][3] [Touch] touch_device_init, sw49407 start
1213[ 1.163051 / 01-01 00:00:01.159][3] [Touch] touch_spi_probe
1214[ 1.163051 / 01-01 00:00:01.159][3] , platform ptr = (null)
1215[ 1.163064 / 01-01 00:00:01.159][3] [Touch] touch_spi_probe : 25 Mhz, chip_select = 0
1216[ 1.163071 / 01-01 00:00:01.159][3] [Touch] platform device register
1217[ 1.163397 / 01-01 00:00:01.159][3] [Touch] start dev.of_node
1218[ 1.163481 / 01-01 00:00:01.159][3] [Touch] fw_image - 0:touch/elsa/L1L57P1_1_07.img
1219[ 1.163488 / 01-01 00:00:01.159][3] [Touch] fw_image - 1:touch/elsa/L1L57P1_1_07.img
1220[ 1.163496 / 01-01 00:00:01.159][3] [Touch] end dev.of_node
1221[ 1.163506 / 01-01 00:00:01.159][3] [Touch] touch_set_device, data:ffffffc0f56a0818
1222[ 1.163513 / 01-01 00:00:01.159][3] [Touch] touch_gpio_init - pin:89, name:touch_reset
1223[ 1.163530 / 01-01 00:00:01.159][3] [Touch] touch_gpio_direction_output - pin:89, value:0
1224[ 1.163549 / 01-01 00:00:01.159][3] [Touch] touch_gpio_init - pin:125, name:touch_int
1225[ 1.163558 / 01-01 00:00:01.159][3] [Touch] touch_gpio_direction_input - pin:125
1226[ 1.163569 / 01-01 00:00:01.159][3] [Touch] touch_gpio_init - pin:-2, name:touch_make_id
1227[ 1.163575 / 01-01 00:00:01.159][3] [Touch] touch_gpio_direction_input - pin:-2
1228[ 1.163629 / 01-01 00:00:01.159][3] spi12.0 supply vdd not found, using dummy regulator
1229[ 1.163700 / 01-01 00:00:01.159][3] spi12.0 supply vio not found, using dummy regulator
1230[ 1.164067 / 01-01 00:00:01.159][3] [Touch] pinctrl set active
1231[ 1.164319 / 01-01 00:00:01.159][3] [Touch] sw49407_power, off
1232[ 1.164327 / 01-01 00:00:01.159][3] [Touch] touch_gpio_direction_output - pin:89, value:0
1233[ 1.165374 / 01-01 00:00:01.159][3] [Touch] sw49407_power, on
1234[ 1.165381 / 01-01 00:00:01.159][3] [Touch] touch_gpio_direction_output - pin:89, value:1
1235[ 1.165471 / 01-01 00:00:01.159][3] [Touch] touch_init_input 1439-2719-255-1439-2719-90-10
1236[ 1.165600 / 01-01 00:00:01.159][3] input: touch_dev as /devices/virtual/input/input1
1237[ 1.165840 / 01-01 00:00:01.159][3] [Touch E] [sw49407_notify 1551] 3 is not supported
1238[ 1.166001 / 01-01 00:00:01.159][3] [Touch] watch_fontdata_attr_init font_buffer(42 KB) malloc
1239[ 1.166026 / 01-01 00:00:01.159][3] [Touch] hw_reset_delay : 90 ms
1240[ 1.166048 / 01-01 00:00:01.159][3] [Touch] platform device registered ...
1241[ 1.168830 / 01-01 00:00:01.159][3] fpc1020 spi8.1: found pin control fpc1020_spi_active
1242[ 1.168852 / 01-01 00:00:01.159][3] fpc1020 spi8.1: found pin control fpc1020_reset_reset
1243[ 1.168859 / 01-01 00:00:01.159][3] fpc1020 spi8.1: found pin control fpc1020_reset_active
1244[ 1.168867 / 01-01 00:00:01.159][3] fpc1020 spi8.1: found pin control fpc1020_cs_low
1245[ 1.168873 / 01-01 00:00:01.159][3] fpc1020 spi8.1: found pin control fpc1020_cs_high
1246[ 1.168880 / 01-01 00:00:01.159][3] fpc1020 spi8.1: found pin control fpc1020_cs_active
1247[ 1.168887 / 01-01 00:00:01.159][3] fpc1020 spi8.1: found pin control fpc1020_irq_active
1248[ 1.168937 / 01-01 00:00:01.159][3] fpc1020 spi8.1: fpc1020_probe enable-wakeup
1249[ 1.169216 / 01-01 00:00:01.159][3] fpc1020 spi8.1: Enabling hardware
1250[ 1.172665 / 01-01 00:00:01.169][3] fpc1020 spi8.1: fpc1020_probe: ok
1251[ 1.172717 / 01-01 00:00:01.169][3] fpc1020_init OK
1252[ 1.173094 / 01-01 00:00:01.169][3] qcom,qpnp-rtc qpnp-rtc-8: rtc core: registered qpnp_rtc as rtc0
1253[ 1.173286 / 01-01 00:00:01.169][3] i2c /dev entries driver
1254[ 1.206755 / 01-01 00:00:01.199][3] vmem: Up and running with 4 banks of memory from [irq size 270720589257 pref window disabled]
1255[ 1.224401 / 01-01 00:00:01.219][3] msm_actuator_get_dt_data:768 msm_actuator_get_dt_data gpio count -2
1256[ 1.224438 / 01-01 00:00:01.219][3] msm_camera_pinctrl_init:1378 Getting pinctrl handle failed
1257[ 1.224446 / 01-01 00:00:01.219][3] msm_camera_power_up:1552 Initialization of pinctrl failed
1258[ 1.224455 / 01-01 00:00:01.219][3] msm_camera_request_gpio_table:741 invalid gpio_tbl 0000000000000000 / size 0
1259[ 1.234224 / 01-01 00:00:01.229][3] msm_cci_init:1399: hw_version = 0x10040000
1260[ 1.234500 / 01-01 00:00:01.229][3] msm_actuator_get_vcm_version:719 msm_actuator_get_vcm_version: [CHECK] vcm_ver(64) rc(0)
1261[ 1.241114 / 01-01 00:00:01.239][3] msm_camera_request_gpio_table:741 invalid gpio_tbl 0000000000000000 / size 0
1262[ 1.243597 / 01-01 00:00:01.239][3] msm_eeprom_platform_probe failed 1823
1263[ 1.244224 / 01-01 00:00:01.239][3] msm_eeprom_platform_probe failed 1823
1264[ 1.244787 / 01-01 00:00:01.239][3] msm_eeprom_i2c_probe failed 936
1265[ 1.247347 / 01-01 00:00:01.239][3] msm_ois_platform_probe:1267 msm_ois_platform_probe: No/Error OIS GPIO
1266[ 1.250169 / 01-01 00:00:01.249][1] [Touch] touch_ic_init Start
1267[ 1.250200 / 01-01 00:00:01.249][1] [Touch] fb_notif change
1268[ 1.250215 / 01-01 00:00:01.249][1] [Touch] sw49407_init: charger_state = 0x00
1269[ 1.250511 / 01-01 00:00:01.249][1] [Touch] info ptr addr read : 0026425C
1270[ 1.250610 / 01-01 00:00:01.249][1] [Touch] tc status read : 0F7000C0
1271[ 1.250618 / 01-01 00:00:01.249][1] [Touch] ========== Info ADDR ==========
1272[ 1.250626 / 01-01 00:00:01.249][1] [Touch] chip_info_addr : 025C
1273[ 1.250633 / 01-01 00:00:01.249][1] [Touch] reg_info_addr : 0264
1274[ 1.250640 / 01-01 00:00:01.249][1] [Touch] ========== Info ADDR ==========
1275[ 1.250647 / 01-01 00:00:01.249][1] [Touch] Model ID is loaded
1276[ 1.250654 / 01-01 00:00:01.249][1] [Touch] Production Test info checksum is ok
1277[ 1.251469 / 01-01 00:00:01.249][1] [Touch] ==Print PT info Data==
1278[ 1.251484 / 01-01 00:00:01.249][1] [Touch] version : v1.07, chip : 9, protocol : 4
1279[ 1.251484 / 01-01 00:00:01.249][1] [Touch]
1280[ 1.251484 / 01-01 00:00:01.249][1] [Touch] fpc : 2, lcm : 4, lot : 9
1281[ 1.251484 / 01-01 00:00:01.249][1] [Touch] product id : L1L57P1
1282[ 1.251484 / 01-01 00:00:01.249][1] [Touch] flash boot : idle, done, crc : ok
1283[ 1.251502 / 01-01 00:00:01.249][1] [Touch] ==Print Config Header Data==
1284[ 1.251510 / 01-01 00:00:01.249][1] [Touch] Chip Rev : 0, Model_ID : 1, lcm_id : 4, fpcb_id : 2, lot_id : 3
1285[ 1.252013 / 01-01 00:00:01.249][1] [Touch] resume ts->lpwg.screen on
1286[ 1.252108 / 01-01 00:00:01.249][1] [Touch] sw49407_lpwg_control mode = 0
1287[ 1.252199 / 01-01 00:00:01.249][1] [Touch] swipe disable
1288[ 1.252207 / 01-01 00:00:01.249][1] [Touch] sw49407_tc_driving = 3, 185
1289[ 1.252300 / 01-01 00:00:01.249][1] [Touch] DDI Display Mode = 3
1290[ 1.252475 / 01-01 00:00:01.249][1] [Touch] Reset Cnt : 19
1291[ 1.253622 / 01-01 00:00:01.249][3] msm_sensor_get_sub_module_index:309 src_node NULL
1292[ 1.254484 / 01-01 00:00:01.249][3] msm_sensor_get_sub_module_index:309 src_node NULL
1293[ 1.255074 / 01-01 00:00:01.249][3] msm_sensor_get_sub_module_index:309 src_node NULL
1294[ 1.260728 / 01-01 00:00:01.259][3] MSM-CPP cpp_init_hardware:867 CPP HW Version: 0x60000000
1295[ 1.260757 / 01-01 00:00:01.259][3] MSM-CPP cpp_init_hardware:885 stream_cnt:0
1296[ 1.274157 / 01-01 00:00:01.269][0] __msm_jpeg_init:1537] Jpeg Device id 0
1297[ 1.275214 / 01-01 00:00:01.269][3] __msm_jpeg_init:1537] Jpeg Device id 2__msm_jpeg_init:1537] Jpeg Device id 3
1298[ 1.280268 / 01-01 00:00:01.279][1] [Touch] sw49407_te_info : 547, 16.69 ms, 59.89 hz
1299[ 1.280335 / 01-01 00:00:01.279][1] [Touch] get fwpath from def_fwpath : rev:0
1300[ 1.280342 / 01-01 00:00:01.279][1] [Touch] fwpath[touch/elsa/L1L57P1_1_07.img]
1301[ 1.280356 / 01-01 00:00:01.279][1] [Touch] fw size:91648, data: ffffffc000ebfc90
1302[ 1.280367 / 01-01 00:00:01.279][1] [Touch] sw49407_fw_compare : binary[1.07.0] device[1.07.0] -> update: 0, force: 0
1303[ 1.280377 / 01-01 00:00:01.279][1] [Touch] There is no need to reset (ret: -1)
1304[ 1.280393 / 01-01 00:00:01.279][1] [Touch] touch_ic_init Start
1305[ 1.280401 / 01-01 00:00:01.279][1] [Touch] sw49407_init: charger_state = 0x00
1306[ 1.280438 / 01-01 00:00:01.279][3] msm_fd_hw_set_dt_parms_by_name: Error property does not exist
1307[ 1.280501 / 01-01 00:00:01.279][1] [Touch] info ptr addr read : 0026425C
1308[ 1.280595 / 01-01 00:00:01.279][1] [Touch] tc status read : 0F5000E4
1309[ 1.280603 / 01-01 00:00:01.279][1] [Touch] ========== Info ADDR ==========
1310[ 1.280610 / 01-01 00:00:01.279][1] [Touch] chip_info_addr : 025C
1311[ 1.280617 / 01-01 00:00:01.279][1] [Touch] reg_info_addr : 0264
1312[ 1.280623 / 01-01 00:00:01.279][1] [Touch] ========== Info ADDR ==========
1313[ 1.280629 / 01-01 00:00:01.279][1] [Touch] Model ID is loaded
1314[ 1.280636 / 01-01 00:00:01.279][1] [Touch] Production Test info checksum is ok
1315[ 1.281423 / 01-01 00:00:01.279][1] [Touch] ==Print PT info Data==
1316[ 1.281436 / 01-01 00:00:01.279][1] [Touch] version : v1.07, chip : 9, protocol : 4
1317[ 1.281436 / 01-01 00:00:01.279][1] [Touch]
1318[ 1.281436 / 01-01 00:00:01.279][1] [Touch] fpc : 2, lcm : 4, lot : 9
1319[ 1.281436 / 01-01 00:00:01.279][1] [Touch] product id : L1L57P1
1320[ 1.281436 / 01-01 00:00:01.279][1] [Touch] flash boot : idle, done, crc : ok
1321[ 1.281453 / 01-01 00:00:01.279][1] [Touch] ==Print Config Header Data==
1322[ 1.281461 / 01-01 00:00:01.279][1] [Touch] Chip Rev : 0, Model_ID : 1, lcm_id : 4, fpcb_id : 2, lot_id : 3
1323[ 1.281960 / 01-01 00:00:01.279][1] [Touch] resume ts->lpwg.screen on
1324[ 1.282054 / 01-01 00:00:01.279][1] [Touch] sw49407_lpwg_control mode = 0
1325[ 1.282142 / 01-01 00:00:01.279][1] [Touch] swipe disable
1326[ 1.282151 / 01-01 00:00:01.279][1] [Touch] sw49407_tc_driving = 3, 185
1327[ 1.282244 / 01-01 00:00:01.279][1] [Touch] DDI Display Mode = 3
1328[ 1.282417 / 01-01 00:00:01.279][1] [Touch] Reset Cnt : 19
1329[ 1.310146 / 01-01 00:00:01.309][1] [Touch] sw49407_te_info : 546, 16.66 ms, 60.00 hz
1330[ 1.310166 / 01-01 00:00:01.309][1] [Touch] touch_ic_init End
1331[ 1.329582 / 01-01 00:00:01.319][2] [Touch] TC_Driving OK
1332[ 1.362180 / 01-01 00:00:01.359][0] ufshcd 624000.ufshc: [LGE][UFS] update quirks, manufacturerid:65535, model:ANY_MODEL, quirk:0x80
1333[ 1.366039 / 01-01 00:00:01.359][0] ufshcd 624000.ufshc: ufshcd_print_pwr_info:[RX, TX]: gear=[3, 3], lane[1, 1], pwr[FAST MODE, FAST MODE], rate = 2
1334[ 1.366143 / 01-01 00:00:01.359][0] ufshcd_get_max_icc_level: Couldn't find valid icc_level = 0
1335[ 1.366964 / 01-01 00:00:01.359][0] scsi 0:0:0:49488: Well-known LUN SKhynix H28U74301AMR E005 PQ: 0 ANSI: 6
1336[ 1.367978 / 01-01 00:00:01.359][0] scsi 0:0:0:49456: Well-known LUN SKhynix H28U74301AMR E005 PQ: 0 ANSI: 6
1337[ 1.368867 / 01-01 00:00:01.359][0] scsi 0:0:0:49476: Well-known LUN SKhynix H28U74301AMR E005 PQ: 0 ANSI: 6
1338[ 1.369828 / 01-01 00:00:01.359][1] scsi 0:0:0:0: Direct-Access SKhynix H28U74301AMR E005 PQ: 0 ANSI: 6
1339[ 1.370443 / 01-01 00:00:01.369][1] scsi 0:0:0:1: Direct-Access SKhynix H28U74301AMR E005 PQ: 0 ANSI: 6
1340[ 1.370939 / 01-01 00:00:01.369][1] scsi 0:0:0:2: Direct-Access SKhynix H28U74301AMR E005 PQ: 0 ANSI: 6
1341[ 1.371428 / 01-01 00:00:01.369][1] scsi 0:0:0:3: Direct-Access SKhynix H28U74301AMR E005 PQ: 0 ANSI: 6
1342[ 1.371912 / 01-01 00:00:01.369][1] scsi 0:0:0:4: Direct-Access SKhynix H28U74301AMR E005 PQ: 0 ANSI: 6
1343[ 1.372401 / 01-01 00:00:01.369][1] scsi 0:0:0:5: Direct-Access SKhynix H28U74301AMR E005 PQ: 0 ANSI: 6
1344[ 1.372891 / 01-01 00:00:01.369][1] scsi 0:0:0:6: Direct-Access SKhynix H28U74301AMR E005 PQ: 0 ANSI: 6
1345[ 1.380070 / 01-01 00:00:01.379][3] msm_fd aa4000.qcom,fd: Face detection halt timeout
1346[ 1.380561 / 01-01 00:00:01.379][3] drv probe : 1278 msm_fd 101
1347[ 1.381478 / 01-01 00:00:01.379][3] usbcore: registered new interface driver uvcvideo
1348[ 1.381486 / 01-01 00:00:01.379][3] USB Video Class driver (1.1.1)
1349[ 1.381749 / 01-01 00:00:01.379][3] SMB1351 smb1351_parallel_slave_probe: smb1351 parallel successfully probed.
1350[ 1.381883 / 01-01 00:00:01.379][3] SMBCHG: smbchg_probe: USB supply not found, deferring probe
1351[ 1.382344 / 01-01 00:00:01.379][3] FG: fg_of_init: Using external sense
1352[ 1.382354 / 01-01 00:00:01.379][3] FG: fg_of_init: batt_profile_enabled : 1
1353[ 1.382361 / 01-01 00:00:01.379][3] FG: fg_of_init: lge_rid_disable : 0
1354[ 1.382377 / 01-01 00:00:01.379][3] FG: fg_of_init: rconn_mohm : 30
1355[ 1.383135 / 01-01 00:00:01.379][3] FG: cc_soc_store_work: nom_cap_uah zero!
1356[ 1.383501 / 01-01 00:00:01.379][2] FG: fg_batt_missing_irq_handler: batt-missing triggered: present
1357[ 1.384850 / 01-01 00:00:01.379][0] FG: fg_probe: rbias software control : 0
1358[ 1.384915 / 01-01 00:00:01.379][3] FG: fg_probe: FG Probe success - FG Revision DIG:3.1 ANA:1.2 PMIC subtype=19
1359[ 1.387596 / 01-01 00:00:01.379][3] panic-handler: free[@0xc0100000+@0xc00000)
1360[ 1.392177 / 01-01 00:00:01.389][3] FG: fg_set_resume_soc: recharge_M resume soc lowered to 0xf7
1361[ 1.429020 / 01-01 00:00:01.419][0] device-mapper: uevent: version 1.0.3
1362[ 1.429238 / 01-01 00:00:01.419][0] device-mapper: ioctl: 4.28.0-ioctl (2014-09-17) initialised: dm-devel@redhat.com
1363[ 1.429426 / 01-01 00:00:01.419][0] device-mapper: req-crypt: dm-req-crypt successfully initalized.
1364[ 1.429426 / 01-01 00:00:01.419][0]
1365[ 1.429443 / 01-01 00:00:01.419][0] +++bluetooth_pm_init
1366[ 1.431480 / 01-01 00:00:01.429][0] bluetooth_pm_probe: bluetooth_pm_probe is called
1367[ 1.431508 / 01-01 00:00:01.429][0] bluetooth_pm_parse_dt: bluetooth_pm_parse_dt is started
1368[ 1.431583 / 01-01 00:00:01.429][0] bluetooth_pm_parse_dt: bt_reset GPIO Number = 1022
1369[ 1.431665 / 01-01 00:00:01.429][0] bluetooth_pm_parse_dt: host_wake GPIO Number = 24
1370[ 1.431703 / 01-01 00:00:01.429][0] bluetooth_pm_parse_dt: ext_wake GPIO Number = 92
1371[ 1.431785 / 01-01 00:00:01.429][0] bluetooth_pm_rfkill_set_power: blocked (1)
1372[ 1.431797 / 01-01 00:00:01.429][0] bluetooth_pm_rfkill_set_power: Receive same status(1)
1373[ 1.432071 / 01-01 00:00:01.429][0] bluetooth_pm_probe : hostwake GPIO : 24(0), btwake GPIO : 92(0)
1374[ 1.432084 / 01-01 00:00:01.429][0] bluetooth_pm_probe: bsi->host_wake_irq: 288
1375[ 1.432287 / 01-01 00:00:01.429][0] bt_pinctrl_init: success to set gpio_default_config for bt
1376[ 1.432301 / 01-01 00:00:01.429][0] bluetooth_pm_create_bt_proc_interface: create bt proc interface
1377[ 1.432721 / 01-01 00:00:01.429][0] ---bluetooth_pm_init done
1378[ 1.433524 / 01-01 00:00:01.429][0] sdhci: Secure Digital Host Controller Interface driver
1379[ 1.433541 / 01-01 00:00:01.429][0] sdhci: Copyright(c) Pierre Ossman
1380[ 1.433552 / 01-01 00:00:01.429][0] sdhci-pltfm: SDHCI platform and OF driver helper
1381[ 1.435175 / 01-01 00:00:01.429][0] qcom_ice_get_pdevice: found ice device ffffffc033fbb400
1382[ 1.435202 / 01-01 00:00:01.429][0] qcom_ice_get_pdevice: matching platform device ffffffc0f8307800
1383[ 1.436076 / 01-01 00:00:01.429][0] sdhci_msm 74a4900.sdhci: sdhci_msm_probe: ICE device is not enabled
1384[ 1.450692 / 01-01 00:00:01.449][0] sdhci_msm 74a4900.sdhci: No vmmc regulator found
1385[ 1.450723 / 01-01 00:00:01.449][0] sdhci_msm 74a4900.sdhci: No vqmmc regulator found
1386[ 1.451118 / 01-01 00:00:01.449][0] mmc0: SDHCI controller on 74a4900.sdhci [74a4900.sdhci] using 64-bit ADMA in legacy mode
1387[ 1.490323 / 01-01 00:00:01.489][0] drv probe : 1435 sdhci_msm 54
1388[ 1.500020 / 01-01 00:00:01.499][0] hidraw: raw HID events driver (C) Jiri Kosina
1389[ 1.501491 / 01-01 00:00:01.499][2] usbcore: registered new interface driver usbhid
1390[ 1.501499 / 01-01 00:00:01.499][2] usbhid: USB HID core driver
1391[ 1.501895 / 01-01 00:00:01.499][3] ashmem: initialized
1392[ 1.501993 / 01-01 00:00:01.499][3] logger: created 256K log 'log_main'
1393[ 1.502059 / 01-01 00:00:01.499][3] logger: created 256K log 'log_events'
1394[ 1.502131 / 01-01 00:00:01.499][3] logger: created 256K log 'log_radio'
1395[ 1.502196 / 01-01 00:00:01.499][3] logger: created 256K log 'log_system'
1396[ 1.503195 / 01-01 00:00:01.499][3] qpnp_coincell_charger_show_state: enabled=Y, voltage=3200 mV, resistance=2100 ohm
1397[ 1.509652 / 01-01 00:00:01.499][3] bimc-bwmon 408000.qcom,cpu-bwmon: BW HWmon governor registered.
1398[ 1.511092 / 01-01 00:00:01.509][3] arm-memlat-mon soc:qcom,arm-memlat-mon-0: Memory Latency governor registered.
1399[ 1.511139 / 01-01 00:00:01.509][3] arm-memlat-mon soc:qcom,arm-memlat-mon-2: Memory Latency governor registered.
1400[ 1.513598 / 01-01 00:00:01.509][3] m4m-hwmon 6530000.qcom,m4m-hwmon: Cache HWmon governor registered.
1401[ 1.517568 / 01-01 00:00:01.509][3] devfreq soc:qcom,cpubw: Couldn't update frequency transition information.
1402[ 1.517686 / 01-01 00:00:01.509][3] devfreq soc:qcom,mincpubw: Couldn't update frequency transition information.
1403[ 1.517801 / 01-01 00:00:01.509][3] devfreq soc:qcom,memlat-cpu0: Couldn't update frequency transition information.
1404[ 1.517907 / 01-01 00:00:01.509][3] devfreq soc:qcom,memlat-cpu2: Couldn't update frequency transition information.
1405[ 1.518916 / 01-01 00:00:01.509][3] devfreq soc:qcom,m4m: Couldn't update frequency transition information.
1406[ 1.521377 / 01-01 00:00:01.519][3] Trustonic TEE: mobicore_init: MobiCore mcDrvModuleApi version is 3.0
1407[ 1.521639 / 01-01 00:00:01.519][3] Trustonic TEE: mobicore_probe: MobiCore t-base-QC-MSM8996-Android-310C-V005-20160617_153829_12623
1408[ 1.522211 / 01-01 00:00:01.519][3] usbcore: registered new interface driver snd-usb-audio
1409[ 1.522247 / 01-01 00:00:01.519][3] usbcore: registered new interface driver snd-ua101
1410[ 1.522281 / 01-01 00:00:01.519][3] usbcore: registered new interface driver snd-usb-caiaq
1411[ 1.522313 / 01-01 00:00:01.519][3] usbcore: registered new interface driver snd-usb-6fire
1412[ 1.524393 / 01-01 00:00:01.519][3] msm8996-pinctrl 1010000.pinctrl: invalid group "gpio143" for function "spkr_i2s"
1413[ 1.524414 / 01-01 00:00:01.519][3] msm8996-pinctrl 1010000.pinctrl: invalid group "gpio143" for function "spkr_i2s"
1414[ 1.524549 / 01-01 00:00:01.519][3] msm8996-pinctrl 1010000.pinctrl: invalid group "gpio143" for function "spkr_i2s"
1415[ 1.524563 / 01-01 00:00:01.519][3] msm8996-pinctrl 1010000.pinctrl: invalid group "gpio143" for function "spkr_i2s"
1416[ 1.525740 / 01-01 00:00:01.519][3] es9218_init()
1417[ 1.525780 / 01-01 00:00:01.519][0] es9218_probe
1418[ 1.525791 / 01-01 00:00:01.519][3] es9218_hw_rev_check() lg board2 rev_(12)
1419[ 1.525850 / 01-01 00:00:01.519][0] es9218_populate_get_pdata: reset gpio 989
1420[ 1.525865 / 01-01 00:00:01.519][3] es9218_populate_get_pdata: hph switch 1013[ 1.525881 / 01-01 00:00:01.519][3] es9218_populate_get_pdata: power gpio 1014
1421[ 1.526002 / 01-01 00:00:01.519][3] es9218_probe() g_ess_rev:2
1422[ 1.526016 / 01-01 00:00:01.519][3] snd_soc_register_codec ret = 0
1423[ 1.535857 / 01-01 00:00:01.529][3] msm-dai-tdm soc:qcom,msm-dai-tdm-tert-rx: msm_dai_tdm_q6_probe: dev_name: soc:qcom,msm-dai-tdm-tert-rx group_id: 0x9120
1424[ 1.536116 / 01-01 00:00:01.529][3] msm-dai-q6-tdm soc:qcom,msm-dai-tdm-tert-rx:qcom,msm-dai-q6-tdm-tert-rx-0: msm_dai_q6_tdm_dev_probe: dev_name: soc:qcom,msm-dai-tdm-tert-rx:qcom,msm-dai-q6-tdm-tert-rx-0 dev_id: 0x9020
1425[ 1.536127 / 01-01 00:00:01.529][3] msm-dai-q6-tdm soc:qcom,msm-dai-tdm-tert-rx:qcom,msm-dai-q6-tdm-tert-rx-0: msm_dai_q6_tdm_dev_probe: Custom tdm header not supported
1426[ 1.536279 / 01-01 00:00:01.529][3] msm-dai-q6-tdm soc:qcom,msm-dai-tdm-tert-rx:qcom,msm-dai-q6-tdm-tert-rx-1: msm_dai_q6_tdm_dev_probe: dev_name: soc:qcom,msm-dai-tdm-tert-rx:qcom,msm-dai-q6-tdm-tert-rx-1 dev_id: 0x9022
1427[ 1.536290 / 01-01 00:00:01.529][3] msm-dai-q6-tdm soc:qcom,msm-dai-tdm-tert-rx:qcom,msm-dai-q6-tdm-tert-rx-1: msm_dai_q6_tdm_dev_probe: Custom tdm header not supported
1428[ 1.536434 / 01-01 00:00:01.529][3] msm-dai-q6-tdm soc:qcom,msm-dai-tdm-tert-rx:qcom,msm-dai-q6-tdm-tert-rx-2: msm_dai_q6_tdm_dev_probe: dev_name: soc:qcom,msm-dai-tdm-tert-rx:qcom,msm-dai-q6-tdm-tert-rx-2 dev_id: 0x9024
1429[ 1.536444 / 01-01 00:00:01.529][3] msm-dai-q6-tdm soc:qcom,msm-dai-tdm-tert-rx:qcom,msm-dai-q6-tdm-tert-rx-2: msm_dai_q6_tdm_dev_probe: Custom tdm header not supported
1430[ 1.536588 / 01-01 00:00:01.529][3] msm-dai-q6-tdm soc:qcom,msm-dai-tdm-tert-rx:qcom,msm-dai-q6-tdm-tert-rx-3: msm_dai_q6_tdm_dev_probe: dev_name: soc:qcom,msm-dai-tdm-tert-rx:qcom,msm-dai-q6-tdm-tert-rx-3 dev_id: 0x9026
1431[ 1.536598 / 01-01 00:00:01.529][3] msm-dai-q6-tdm soc:qcom,msm-dai-tdm-tert-rx:qcom,msm-dai-q6-tdm-tert-rx-3: msm_dai_q6_tdm_dev_probe: Custom tdm header not supported
1432[ 1.536622 / 01-01 00:00:01.529][3] msm-dai-tdm soc:qcom,msm-dai-tdm-tert-tx: msm_dai_tdm_q6_probe: dev_name: soc:qcom,msm-dai-tdm-tert-tx group_id: 0x9121
1433[ 1.536763 / 01-01 00:00:01.529][3] msm-dai-q6-tdm soc:qcom,msm-dai-tdm-tert-tx:qcom,msm-dai-q6-tdm-tert-tx-0: msm_dai_q6_tdm_dev_probe: dev_name: soc:qcom,msm-dai-tdm-tert-tx:qcom,msm-dai-q6-tdm-tert-tx-0 dev_id: 0x9021
1434[ 1.536773 / 01-01 00:00:01.529][3] msm-dai-q6-tdm soc:qcom,msm-dai-tdm-tert-tx:qcom,msm-dai-q6-tdm-tert-tx-0: msm_dai_q6_tdm_dev_probe: Custom tdm header not supported
1435[ 1.536917 / 01-01 00:00:01.529][3] msm-dai-q6-tdm soc:qcom,msm-dai-tdm-tert-tx:qcom,msm-dai-q6-tdm-tert-tx-1: msm_dai_q6_tdm_dev_probe: dev_name: soc:qcom,msm-dai-tdm-tert-tx:qcom,msm-dai-q6-tdm-tert-tx-1 dev_id: 0x9023
1436[ 1.536927 / 01-01 00:00:01.529][3] msm-dai-q6-tdm soc:qcom,msm-dai-tdm-tert-tx:qcom,msm-dai-q6-tdm-tert-tx-1: msm_dai_q6_tdm_dev_probe: Custom tdm header not supported
1437[ 1.537073 / 01-01 00:00:01.529][3] msm-dai-q6-tdm soc:qcom,msm-dai-tdm-tert-tx:qcom,msm-dai-q6-tdm-tert-tx-2: msm_dai_q6_tdm_dev_probe: dev_name: soc:qcom,msm-dai-tdm-tert-tx:qcom,msm-dai-q6-tdm-tert-tx-2 dev_id: 0x9025
1438[ 1.537082 / 01-01 00:00:01.529][3] msm-dai-q6-tdm soc:qcom,msm-dai-tdm-tert-tx:qcom,msm-dai-q6-tdm-tert-tx-2: msm_dai_q6_tdm_dev_probe: Custom tdm header not supported
1439[ 1.537223 / 01-01 00:00:01.529][3] msm-dai-q6-tdm soc:qcom,msm-dai-tdm-tert-tx:qcom,msm-dai-q6-tdm-tert-tx-3: msm_dai_q6_tdm_dev_probe: dev_name: soc:qcom,msm-dai-tdm-tert-tx:qcom,msm-dai-q6-tdm-tert-tx-3 dev_id: 0x9027
1440[ 1.537233 / 01-01 00:00:01.529][3] msm-dai-q6-tdm soc:qcom,msm-dai-tdm-tert-tx:qcom,msm-dai-q6-tdm-tert-tx-3: msm_dai_q6_tdm_dev_probe: Custom tdm header not supported
1441[ 1.537256 / 01-01 00:00:01.529][3] msm-dai-tdm soc:qcom,msm-dai-tdm-quat-rx: msm_dai_tdm_q6_probe: dev_name: soc:qcom,msm-dai-tdm-quat-rx group_id: 0x9130
1442[ 1.537397 / 01-01 00:00:01.529][3] msm-dai-q6-tdm soc:qcom,msm-dai-tdm-quat-rx:qcom,msm-dai-q6-tdm-quat-rx-0: msm_dai_q6_tdm_dev_probe: dev_name: soc:qcom,msm-dai-tdm-quat-rx:qcom,msm-dai-q6-tdm-quat-rx-0 dev_id: 0x9030
1443[ 1.537407 / 01-01 00:00:01.529][3] msm-dai-q6-tdm soc:qcom,msm-dai-tdm-quat-rx:qcom,msm-dai-q6-tdm-quat-rx-0: msm_dai_q6_tdm_dev_probe: Custom tdm header not supported
1444[ 1.537551 / 01-01 00:00:01.529][3] msm-dai-q6-tdm soc:qcom,msm-dai-tdm-quat-rx:qcom,msm-dai-q6-tdm-quat-rx-1: msm_dai_q6_tdm_dev_probe: dev_name: soc:qcom,msm-dai-tdm-quat-rx:qcom,msm-dai-q6-tdm-quat-rx-1 dev_id: 0x9032
1445[ 1.537561 / 01-01 00:00:01.529][3] msm-dai-q6-tdm soc:qcom,msm-dai-tdm-quat-rx:qcom,msm-dai-q6-tdm-quat-rx-1: msm_dai_q6_tdm_dev_probe: Custom tdm header not supported
1446[ 1.537708 / 01-01 00:00:01.529][3] msm-dai-q6-tdm soc:qcom,msm-dai-tdm-quat-rx:qcom,msm-dai-q6-tdm-quat-rx-2: msm_dai_q6_tdm_dev_probe: dev_name: soc:qcom,msm-dai-tdm-quat-rx:qcom,msm-dai-q6-tdm-quat-rx-2 dev_id: 0x9034
1447[ 1.537717 / 01-01 00:00:01.529][3] msm-dai-q6-tdm soc:qcom,msm-dai-tdm-quat-rx:qcom,msm-dai-q6-tdm-quat-rx-2: msm_dai_q6_tdm_dev_probe: Custom tdm header not supported
1448[ 1.537859 / 01-01 00:00:01.529][3] msm-dai-q6-tdm soc:qcom,msm-dai-tdm-quat-rx:qcom,msm-dai-q6-tdm-quat-rx-3: msm_dai_q6_tdm_dev_probe: dev_name: soc:qcom,msm-dai-tdm-quat-rx:qcom,msm-dai-q6-tdm-quat-rx-3 dev_id: 0x9036
1449[ 1.537869 / 01-01 00:00:01.529][3] msm-dai-q6-tdm soc:qcom,msm-dai-tdm-quat-rx:qcom,msm-dai-q6-tdm-quat-rx-3: msm_dai_q6_tdm_dev_probe: Custom tdm header not supported
1450[ 1.537891 / 01-01 00:00:01.529][3] msm-dai-tdm soc:qcom,msm-dai-tdm-quat-tx: msm_dai_tdm_q6_probe: dev_name: soc:qcom,msm-dai-tdm-quat-tx group_id: 0x9131
1451[ 1.538029 / 01-01 00:00:01.529][3] msm-dai-q6-tdm soc:qcom,msm-dai-tdm-quat-tx:qcom,msm-dai-q6-tdm-quat-tx-0: msm_dai_q6_tdm_dev_probe: dev_name: soc:qcom,msm-dai-tdm-quat-tx:qcom,msm-dai-q6-tdm-quat-tx-0 dev_id: 0x9031
1452[ 1.538039 / 01-01 00:00:01.529][3] msm-dai-q6-tdm soc:qcom,msm-dai-tdm-quat-tx:qcom,msm-dai-q6-tdm-quat-tx-0: msm_dai_q6_tdm_dev_probe: Custom tdm header not supported
1453[ 1.538182 / 01-01 00:00:01.529][3] msm-dai-q6-tdm soc:qcom,msm-dai-tdm-quat-tx:qcom,msm-dai-q6-tdm-quat-tx-1: msm_dai_q6_tdm_dev_probe: dev_name: soc:qcom,msm-dai-tdm-quat-tx:qcom,msm-dai-q6-tdm-quat-tx-1 dev_id: 0x9033
1454[ 1.538192 / 01-01 00:00:01.529][3] msm-dai-q6-tdm soc:qcom,msm-dai-tdm-quat-tx:qcom,msm-dai-q6-tdm-quat-tx-1: msm_dai_q6_tdm_dev_probe: Custom tdm header not supported
1455[ 1.538336 / 01-01 00:00:01.529][3] msm-dai-q6-tdm soc:qcom,msm-dai-tdm-quat-tx:qcom,msm-dai-q6-tdm-quat-tx-2: msm_dai_q6_tdm_dev_probe: dev_name: soc:qcom,msm-dai-tdm-quat-tx:qcom,msm-dai-q6-tdm-quat-tx-2 dev_id: 0x9035
1456[ 1.538347 / 01-01 00:00:01.529][3] msm-dai-q6-tdm soc:qcom,msm-dai-tdm-quat-tx:qcom,msm-dai-q6-tdm-quat-tx-2: msm_dai_q6_tdm_dev_probe: Custom tdm header not supported
1457[ 1.538488 / 01-01 00:00:01.529][3] msm-dai-q6-tdm soc:qcom,msm-dai-tdm-quat-tx:qcom,msm-dai-q6-tdm-quat-tx-3: msm_dai_q6_tdm_dev_probe: dev_name: soc:qcom,msm-dai-tdm-quat-tx:qcom,msm-dai-q6-tdm-quat-tx-3 dev_id: 0x9037
1458[ 1.538497 / 01-01 00:00:01.529][3] msm-dai-q6-tdm soc:qcom,msm-dai-tdm-quat-tx:qcom,msm-dai-q6-tdm-quat-tx-3: msm_dai_q6_tdm_dev_probe: Custom tdm header not supported
1459[ 1.541000 / 01-01 00:00:01.539][3] msm-compr-dsp soc:qcom,msm-compr-dsp: msm_compr_probe: dev name soc:qcom,msm-compr-dsp
1460[ 1.553408 / 01-01 00:00:01.549][3] GACT probability on
1461[ 1.553427 / 01-01 00:00:01.549][3] Mirror/redirect action on
1462[ 1.553440 / 01-01 00:00:01.549][3] Simple TC action Loaded
1463[ 1.553673 / 01-01 00:00:01.549][3] netem: version 1.3
1464[ 1.553687 / 01-01 00:00:01.549][3] u32 classifier
1465[ 1.553692 / 01-01 00:00:01.549][3] Performance counters on
1466[ 1.553697 / 01-01 00:00:01.549][3] input device check on
1467[ 1.553701 / 01-01 00:00:01.549][3] Actions configured
1468[ 1.553727 / 01-01 00:00:01.549][3] Netfilter messages via NETLINK v0.30.
1469[ 1.553755 / 01-01 00:00:01.549][3] nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
1470[ 1.553951 / 01-01 00:00:01.549][3] ctnetlink v0.93: registering with nfnetlink.
1471[ 1.554266 / 01-01 00:00:01.549][3] xt_time: kernel timezone is -0000
1472[ 1.554286 / 01-01 00:00:01.549][3] 939-23012-001-quicksec-vpnclient-for-android-3.4-3478-b05f514d009c-3478
1473[ 1.554292 / 01-01 00:00:01.549][3] vpnclient kernel spd loaded.
1474[ 1.554439 / 01-01 00:00:01.549][3] ip_tables: (C) 2000-2006 Netfilter Core Team
1475[ 1.554514 / 01-01 00:00:01.549][3] arp_tables: (C) 2002 David S. Miller
1476[ 1.554542 / 01-01 00:00:01.549][3] TCP: bic registered
1477[ 1.554550 / 01-01 00:00:01.549][3] TCP: cubic registered
1478[ 1.554556 / 01-01 00:00:01.549][3] Initializing XFRM netlink socket
1479[ 1.554723 / 01-01 00:00:01.549][3] NET: Registered protocol family 10
1480[ 1.555213 / 01-01 00:00:01.549][3] mip6: Mobile IPv6
1481[ 1.555230 / 01-01 00:00:01.549][3] ip6_tables: (C) 2000-2006 Netfilter Core Team
1482[ 1.555305 / 01-01 00:00:01.549][3] sit: IPv6 over IPv4 tunneling driver
1483[ 1.555525 / 01-01 00:00:01.549][3] NET: Registered protocol family 17
1484[ 1.555542 / 01-01 00:00:01.549][3] NET: Registered protocol family 15
1485[ 1.555571 / 01-01 00:00:01.549][3] bridge: automatic filtering via arp/ip/ip6tables has been deprecated. Update your scripts to load br_netfilter if you need this.
1486[ 1.555579 / 01-01 00:00:01.549][3] Ebtables v2.0 registered
1487[ 1.555669 / 01-01 00:00:01.549][3] l2tp_core: L2TP core driver, V2.0
1488[ 1.555682 / 01-01 00:00:01.549][3] l2tp_ppp: PPPoL2TP kernel driver, V2.0
1489[ 1.555688 / 01-01 00:00:01.549][3] l2tp_ip: L2TP IP encapsulation support (L2TPv3)
1490[ 1.555703 / 01-01 00:00:01.549][3] l2tp_netlink: L2TP netlink interface
1491[ 1.555720 / 01-01 00:00:01.549][3] l2tp_eth: L2TP ethernet pseudowire support (L2TPv3)
1492[ 1.555743 / 01-01 00:00:01.549][3] l2tp_debugfs: L2TP debugfs support
1493[ 1.555751 / 01-01 00:00:01.549][3] l2tp_ip6: L2TP IP encapsulation support for IPv6 (L2TPv3)
1494[ 1.556610 / 01-01 00:00:01.549][3] NET: Registered protocol family 27
1495[ 1.558692 / 01-01 00:00:01.549][0] usb_otg_vreg: no parameters
1496[ 1.558753 / 01-01 00:00:01.549][0] reg-fixed-voltage soc:usb-otg-switch: Failed to find supply vin
1497[ 1.558815 / 01-01 00:00:01.549][0] reg-fixed-voltage soc:usb-otg-switch: Failed to register regulator: -517
1498[ 1.561582 / 01-01 00:00:01.559][0] subsys-pil-tz 9300000.qcom,lpass: for adsp segments only will be dumped.
1499[ 1.562625 / 01-01 00:00:01.559][0] subsys-pil-tz 1c00000.qcom,ssc: for slpi segments only will be dumped.
1500[ 1.563813 / 01-01 00:00:01.559][0] pil-q6v5-mss 2080000.qcom,mss: Failed to find the pas_id.
1501[ 1.564455 / 01-01 00:00:01.559][0] pil-q6v5-mss 2080000.qcom,mss: for modem segments only will be dumped.
1502[ 1.564671 / 01-01 00:00:01.559][0] [LGE-ADC] lge_adc_qct_probe : lge_battery_probe starts!!!
1503[ 1.564768 / 01-01 00:00:01.559][0] [LGE-ADC] lge_adc_qct_probe : XO_THERM_CH : 114, PA0_THERM_CH : 117, PA1_THERM_CH : 119
1504[ 1.564776 / 01-01 00:00:01.559][0] [LGE-ADC] lge_adc_qct_probe : BD1_THERM_CH : 255, BD2_THERM_CH : 116
1505[ 1.564783 / 01-01 00:00:01.559][0] [LGE-ADC] lge_adc_qct_probe : BATT_THERM_CH : -22, USB_ID_CH : 57
1506[ 1.564900 / 01-01 00:00:01.559][0] [LGE-ADC] lge_adc_qct_probe : lge_battery_probe done!!!
1507[ 1.564919 / 01-01 00:00:01.559][0] lge_power_changed_work
1508[ 1.565068 / 01-01 00:00:01.559][0] [LGE-CD] cable_detect_probe : lge_cable_detect probe start!
1509[ 1.565208 / 01-01 00:00:01.559][0] lge_power_changed_work
1510[ 1.565228 / 01-01 00:00:01.559][0] [LGE-CC] lgcc_vote_fcc_update : lgcc_vote: vote id[0], set cur[3100]
1511[ 1.565253 / 01-01 00:00:01.559][0] [LGE-CC] lge_check_typec_work : Check c-type cable
1512[ 1.565263 / 01-01 00:00:01.559][0] [LGE-CC] lge_hvdcp_set_ibat_work : Check HVDCP
1513[ 1.565272 / 01-01 00:00:01.559][0] lge_power_changed_work
1514[ 1.566605 / 01-01 00:00:01.559][0] [LGE-CD] cable_detect_read_cable_info : adc = 1792000
1515[ 1.566613 / 01-01 00:00:01.559][0] [LGE-CD] cable_detect_read_cable_info : cable info --> 14
1516[ 1.566620 / 01-01 00:00:01.559][0] [LGE-CD] cable_detect_probe : cable_detect probe end!
1517[ 1.567729 / 01-01 00:00:01.559][0] dwc3_msm_power_get_property_usb: POWER_SUPPLY_PROP_VOLTAGE_NOW
1518[ 1.583230 / 01-01 00:00:01.579][0] dwc3_msm_power_get_property_usb: POWER_SUPPLY_PROP_VOLTAGE_NOW
1519[ 1.585182 / 01-01 00:00:01.579][0] sps:BAM 0x0000000006b04000 is registered.
1520[ 1.585954 / 01-01 00:00:01.579][0] [LGE-CD] lge_cable_detect_external_power_changed : ibat 500000, iusb 500000
1521[ 1.586010 / 01-01 00:00:01.579][0] dwc3_msm_power_get_property_usb: POWER_SUPPLY_PROP_VOLTAGE_NOW
1522[ 1.586155 / 01-01 00:00:01.579][0] lge_power_changed_work
1523[ 1.586196 / 01-01 00:00:01.579][0] [LGE-CC] lge_check_typec_work : Check c-type cable
1524[ 1.586206 / 01-01 00:00:01.579][0] [LGE-CC] lge_hvdcp_set_ibat_work : Check HVDCP
1525[ 1.587645 / 01-01 00:00:01.579][0] anx7688-usbc 6-0028: battery supply not found, deferring probe
1526[ 1.587742 / 01-01 00:00:01.579][0] SMBCHG: smbchg_probe: Success get LG power class property
1527[ 1.587871 / 01-01 00:00:01.579][0] qpnp-smbcharger qpnp-smbcharger-16: node /soc/qcom,spmi@400f000/qcom,pmi8994@2/qcom,qpnp-smbcharger IO resource absent!
1528[ 1.587940 / 01-01 00:00:01.579][0] SMBCHG: smbchg_check_chg_version: pmic=PMI8996, wa_flags=0xf0, hvdcp_supported=true
1529[ 1.587969 / 01-01 00:00:01.579][0] SMBCHG: smb_parse_dt: parallel usb thr: 1400, 9v thr: 900
1530[ 1.588103 / 01-01 00:00:01.579][0] smbcharger_charger_otg: no parameters
1531[ 1.588229 / 01-01 00:00:01.579][0] smbcharger_external_otg: no parameters
1532[ 1.588264 / 01-01 00:00:01.579][0] smbcharger_external_otg: supplied by pmi8994_boost_5v
1533[ 1.588363 / 01-01 00:00:01.579][0] SMBCHG: smbchg_hw_init: Charger Revision DIG: 2.0; ANA: 2.1
1534[ 1.588420 / 01-01 00:00:01.579][0] SMBCHG: smbchg_set_aicl_rerun_period_s: aicl rerun period set to 45s
1535[ 1.588790 / 01-01 00:00:01.579][0] vote: name[SMBCHG: battchg_suspend], client_id[1], state[0], val[0]
1536[ 1.588854 / 01-01 00:00:01.579][0] SMBCHG: smbchg_hw_init: set vfloat to 4400
1537[ 1.588908 / 01-01 00:00:01.579][0] SMBCHG: smbchg_iterm_set: set tcc (100) to 0x02
1538[ 1.589097 / 01-01 00:00:01.579][0] SMBCHG: smbchg_stay_awake: staying awake: 0x02 (bit 2)
1539[ 1.589107 / 01-01 00:00:01.579][0] SMBCHG: smbchg_vfloat_adjust_check: Starting vfloat adjustments
1540[ 1.589176 / 01-01 00:00:01.579][0] SMBCHG: smbchg_relax: relaxing: 0x00 (bit 2)
1541[ 1.589414 / 01-01 00:00:01.579][0] vote: name[SMBCHG: usb_suspend], client_id[0], state[0], val[0]
1542[ 1.589428 / 01-01 00:00:01.579][0] vote: name[SMBCHG: dc_suspend], client_id[0], state[0], val[0]
1543[ 1.589949 / 01-01 00:00:01.579][0] vote: name[SMBCHG: dcl_icl], client_id[0], state[1], val[1500]
1544[ 1.589975 / 01-01 00:00:01.579][0] SMBCHG: smbchg_set_dc_current_max: dc current set to 1500 mA
1545[ 1.590175 / 01-01 00:00:01.589][1] vote: name[SMBCHG: fcc], client_id[1], state[1], val[3100]
1546[ 1.590288 / 01-01 00:00:01.589][1] SMBCHG: smbchg_set_fastchg_current_raw: fastcharge current requested 3100, set to 3000
1547[ 1.590360 / 01-01 00:00:01.589][1] vote: name[SMBCHG: hwaicl_enable_indirect], client_id[0], state[1], val[0]
1548[ 1.590373 / 01-01 00:00:01.589][1] vote: name[SMBCHG: hwaicl_disable], client_id[0], state[0], val[0]
1549[ 1.590490 / 01-01 00:00:01.589][1] SMBCHG: batt_pres_handler: triggered: 0x00
1550[ 1.590496 / 01-01 00:00:01.589][1] SMBCHG: smbchg_stay_awake: staying awake: 0x02 (bit 2)
1551[ 1.590504 / 01-01 00:00:01.589][1] SMBCHG: smbchg_vfloat_adjust_check: Starting vfloat adjustments
1552[ 1.590647 / 01-01 00:00:01.589][1] SMBCHG: smbchg_relax: relaxing: 0x00 (bit 2)
1553[ 1.590738 / 01-01 00:00:01.589][1] SMBCHG: usbid_change_handler: triggered
1554[ 1.590754 / 01-01 00:00:01.589][1] FG: set_resume_soc_work: recharge_M 0(ta)-0(lowered)-0(chg_done)-1(health)
1555[ 1.620052 / 01-01 00:00:01.619][1] SMBCHG: get_property_from_typec: typec psy doesn't prepared
1556[ 1.620173 / 01-01 00:00:01.619][1] SMBCHG: src_detect_handler: chip->usb_present = 0 usb_present = 1 src_detect = 1 hvdcp_3_det_ignore_uv=0
1557[ 1.620182 / 01-01 00:00:01.619][1] vote: name[SMBCHG: hwaicl_disable], client_id[1], state[0], val[0]
1558[ 1.620195 / 01-01 00:00:01.619][1] vote: name[SMBCHG: usb_suspend], client_id[6], state[0], val[0]
1559[ 1.620207 / 01-01 00:00:01.619][1] SMBCHG: handle_usb_insertion: triggered
1560[ 1.620242 / 01-01 00:00:01.619][1] dwc3_msm_power_get_property_usb: POWER_SUPPLY_PROP_VOLTAGE_NOW
1561[ 1.620474 / 01-01 00:00:01.619][0] SMBCHG: handle_usb_insertion: inserted type = 4 (SDP)
1562[ 1.620482 / 01-01 00:00:01.619][1] SMBCHG: smbchg_change_usb_supply_type: Type 4: setting mA = 100
1563[ 1.620491 / 01-01 00:00:01.619][1] vote: name[SMBCHG: usb_icl], client_id[0], state[1], val[100]
1564[ 1.620515 / 01-01 00:00:01.619][1] SMBCHG: smbchg_set_usb_current_max: USB current_ma = 100
1565[ 1.620522 / 01-01 00:00:01.619][1] vote: name[SMBCHG: usb_suspend], client_id[2], state[0], val[0]
1566[ 1.620608 / 01-01 00:00:01.619][1] SMBCHG: smbchg_set_usb_current_max: usb type = 4 current set to 100 mA
1567[ 1.620627 / 01-01 00:00:01.619][1] vote: name[SMBCHG: usb_icl], client_id[9], state[1], val[2000]
1568[ 1.620647 / 01-01 00:00:01.619][1] msm-dwc3 6a00000.ssusb: dwc3_msm_power_set_property_usb: charger type: USB_SDP_CHARGER
1569[ 1.620662 / 01-01 00:00:01.619][1] [DWC3] factory mode 0
1570[ 1.620670 / 01-01 00:00:01.619][1] dwc3_floated_chg_check: start check floated charger
1571[ 1.620793 / 01-01 00:00:01.619][1] msm-dwc3 6a00000.ssusb: dwc3_msm_power_set_property_usb: notify xceiv event with val:1, vbus_active:0
1572[ 1.620800 / 01-01 00:00:01.619][1] dwc3_ext_event_notify
1573[ 1.621195 / 01-01 00:00:01.619][1] i2c-msm-v2 75b5000.i2c: msm_bus_scale_register_client(mstr-id:84):0x20 (ok)
1574[ 1.621300 / 01-01 00:00:01.619][1] msm-dwc3 6a00000.ssusb: undefined state, vbus:online
1575[ 1.622959 / 01-01 00:00:01.619][1] [LGE-CD] lge_cable_detect_external_power_changed : chg_present 1, prev 0
1576[ 1.622971 / 01-01 00:00:01.619][1] [LGE-CD] lge_cable_detect_external_power_changed : ibat 500000, iusb 500000
1577[ 1.623009 / 01-01 00:00:01.619][1] dwc3_msm_power_get_property_usb: POWER_SUPPLY_PROP_VOLTAGE_NOW
1578[ 1.623139 / 01-01 00:00:01.619][1] lge_power_changed_work
1579[ 1.623154 / 01-01 00:00:01.619][0] SMB1351 smb1351_fastchg_current_set: smb1351_fastchg_current_set - fastchg_current[1000]
1580[ 1.623160 / 01-01 00:00:01.619][1] [LGE-CC] lge_cc_external_lge_power_changed : usb present : 1
1581[ 1.624355 / 01-01 00:00:01.619][1] dwc3_msm_power_get_property_usb: POWER_SUPPLY_PROP_VOLTAGE_NOW
1582[ 1.624414 / 01-01 00:00:01.619][0] SMB1351 smb1351_usb_suspend: reason = 4 requested_suspend = 1 suspended_status = 0
1583[ 1.624688 / 01-01 00:00:01.619][0] SMB1351 smb1351_usb_suspend: reason = 16 requested_suspend = 0 suspended_status = 4
1584[ 1.625399 / 01-01 00:00:01.619][0] SMBCHG: handle_usb_insertion: triggered
1585[ 1.625434 / 01-01 00:00:01.619][0] SMBCHG: handle_usb_insertion: inserted type = 4 (SDP)
1586[ 1.625441 / 01-01 00:00:01.619][0] SMBCHG: smbchg_change_usb_supply_type: Type 4: setting mA = 100
1587[ 1.625451 / 01-01 00:00:01.619][0] vote: name[SMBCHG: usb_icl], client_id[0], state[1], val[100]
1588[ 1.625464 / 01-01 00:00:01.619][0] vote: name[SMBCHG: usb_icl], client_id[9], state[1], val[2000]
1589[ 1.625479 / 01-01 00:00:01.619][0] msm-dwc3 6a00000.ssusb: dwc3_msm_power_set_property_usb: charger type: USB_SDP_CHARGER
1590[ 1.625493 / 01-01 00:00:01.619][0] [DWC3] factory mode 0
1591[ 1.625502 / 01-01 00:00:01.619][0] dwc3_floated_chg_check: start check floated charger
1592[ 1.625623 / 01-01 00:00:01.619][0] msm-dwc3 6a00000.ssusb: dwc3_msm_power_set_property_usb: notify xceiv event with val:1, vbus_active:1
1593[ 1.625630 / 01-01 00:00:01.619][0] dwc3_ext_event_notify
1594[ 1.627036 / 01-01 00:00:01.619][1] dwc3_msm_power_get_property_usb: POWER_SUPPLY_PROP_VOLTAGE_NOW
1595[ 1.628360 / 01-01 00:00:01.619][1] dwc3_msm_power_get_property_usb: POWER_SUPPLY_PROP_VOLTAGE_NOW
1596[ 1.651780 / 01-01 00:00:01.649][1] [DWC3] factory mode 0
1597[ 1.651822 / 01-01 00:00:01.649][0] [Touch] NOTIFY_CONNECTION!
1598[ 1.651829 / 01-01 00:00:01.649][0] [Touch] TA Type: 1
1599[ 1.651837 / 01-01 00:00:01.649][0] [Touch] sw49407_connect: write charger_state = 0x01
1600[ 1.657608 / 01-01 00:00:01.649][0] msm-dwc3 6a00000.ssusb: b_peripheral state, vbus:online
1601[ 1.657630 / 01-01 00:00:01.649][0] dwc3_msm_power_get_property_usb: POWER_SUPPLY_PROP_VOLTAGE_NOW
1602[ 1.660370 / 01-01 00:00:01.659][0] vote: name[SMBCHG: battchg_suspend], client_id[1], state[0], val[0]
1603[ 1.667280 / 01-01 00:00:01.659][1] qpnp-smbcharger qpnp-smbcharger-16: node /soc/qcom,spmi@400f000/qcom,pmi8994@2/qcom,qpnp-smbcharger IO resource absent!
1604[ 1.667309 / 01-01 00:00:01.659][1] msm-dwc3 6a00000.ssusb: dwc3_msm_power_set_property_usb: notify xceiv event with val:1, vbus_active:1
1605[ 1.668747 / 01-01 00:00:01.659][1] qpnp-smbcharger qpnp-smbcharger-16: SMBCHG successfully probe Charger version=SCHG Revision DIG:2.0 ANA:2.1 batt=1 dc=0 usb=1
1606[ 1.668755 / 01-01 00:00:01.659][1] SMBCHG: smbchg_probe: smbchg_probe end
1607[ 1.668764 / 01-01 00:00:01.659][1] drv probe : 1587 qpnp-smbcharger 81
1608[ 1.671253 / 01-01 00:00:01.669][0] FG: update_sram_data: soc:[50], soc_raw[9849], voltage:[4300359], ocv:[4350407], current:[469052], batt_temp:[-22], charge_raw [0 / 0]
1609[ 1.671271 / 01-01 00:00:01.669][0] SMBCHG: smbchg_cc_esr_wa_check: ESR count is not zero, skipping
1610[ 1.671282 / 01-01 00:00:01.669][0] SMBCHG: smbchg_config_chg_battery_type: BATTERY FULL NAME : LGE_BL44E1F_LGC_3200mAh
1611[ 1.671341 / 01-01 00:00:01.669][0] vote: name[SMBCHG: usb_icl], client_id[0], state[1], val[0]
1612[ 1.671367 / 01-01 00:00:01.669][0] SMBCHG: smbchg_set_usb_current_max: USB current_ma = 0
1613[ 1.671375 / 01-01 00:00:01.669][0] vote: name[SMBCHG: usb_suspend], client_id[2], state[1], val[0]
1614[ 1.671416 / 01-01 00:00:01.669][0] SMBCHG: smbchg_set_usb_current_max: usb type = 4 current set to 0 mA
1615[ 1.671473 / 01-01 00:00:01.669][3] SMBCHG: power_ok_handler: triggered: 0x00
1616[ 1.671485 / 01-01 00:00:01.669][0] SMBCHG: smbchg_stay_awake: staying awake: 0x01 (bit 1)
1617[ 1.671497 / 01-01 00:00:01.669][0] SMBCHG: smbchg_vfloat_adjust_check: Starting vfloat adjustments
1618[ 1.671517 / 01-01 00:00:01.669][0] dwc3_msm_power_get_property_usb: POWER_SUPPLY_PROP_VOLTAGE_NOW
1619[ 1.671747 / 01-01 00:00:01.669][2] usb_otg_vreg: no parameters
1620[ 1.671775 / 01-01 00:00:01.669][2] usb_otg_vreg: supplied by smbcharger_external_otg
1621[ 1.672536 / 01-01 00:00:01.669][2] anx7688-usbc 6-0028: usb pd max volt: 9000mV, max power: 27000mW, min power: 3000mW
1622[ 1.674204 / 01-01 00:00:01.669][0] vote: name[SMBCHG: battchg_suspend], client_id[1], state[0], val[0]
1623[ 1.674222 / 01-01 00:00:01.669][0] SMBCHG: smbchg_config_chg_battery_type: BATTERY FULL NAME : LGE_BL44E1F_LGC_3200mAh
1624[ 1.674263 / 01-01 00:00:01.669][0] vote: name[SMBCHG: usb_icl], client_id[0], state[1], val[0]
1625[ 1.674277 / 01-01 00:00:01.669][0] SMBCHG: smbchg_vfloat_adjust_check: Starting vfloat adjustments
1626[ 1.675642 / 01-01 00:00:01.669][3] SMBCHG: fastchg_handler: p2f triggered
1627[ 1.675662 / 01-01 00:00:01.669][3] SMBCHG: smbchg_vfloat_adjust_check: Starting vfloat adjustments
1628[ 1.693396 / 01-01 00:00:01.689][2] i2c-msm-v2 757a000.i2c: msm_bus_scale_register_client(mstr-id:86):0x21 (ok)
1629[ 1.711796 / 01-01 00:00:01.709][0] [LGE][MMC][mmc_read_ssr ( )] mmc_hostname:mmc0, 4 ==> SPEED_CLASS 10
1630[ 1.744126 / 01-01 00:00:01.739][2] anx7688-usbc 6-0028: boot load done
1631[ 1.749290 / 01-01 00:00:01.739][2] anx7688-usbc 6-0028: request_firmware(analogix/mi1_eeprom_20_8b.img)
1632[ 1.841568 / 01-01 00:00:01.839][0] mmc0: new ultra high speed SDR104 SDXC card at address 0001
1633[ 1.841579 / 01-01 00:00:01.839][0] [LGE][MMC][mmc_add_card ( )] mmc_hostname:mmc0, type:SDXC
1634[ 1.841798 / 01-01 00:00:01.839][0] sdhci_msm_pm_qos_cpu_init (): voted for group #0 (mask=0x3) latency=70 (0xffffffc033966200)
1635[ 1.841816 / 01-01 00:00:01.839][0] sdhci_msm_pm_qos_cpu_init (): voted for group #1 (mask=0xc) latency=70 (0xffffffc033966208)
1636[ 1.841914 / 01-01 00:00:01.839][0] mmcblk0: mmc0:0001 00000 238 GiB
1637[ 1.843794 / 01-01 00:00:01.839][0] mmcblk0: p1
1638[ 1.844050 / 01-01 00:00:01.839][0] [LGE][MMC][mmc_add_card ( )] device_add & uevent posting complete!
1639[ 1.884121 / 01-01 00:00:01.879][2] sdc: sdc1 sdc2 sdc3
1640[ 1.884253 / 01-01 00:00:01.879][1] sdb: sdb1 sdb2 sdb3 sdb4 sdb5 sdb6 sdb7
1641[ 1.884365 / 01-01 00:00:01.879][3] sdd: sdd1 sdd2 sdd3 sdd4 sdd5
1642[ 1.884549 / 01-01 00:00:01.879][1] sde: sde1 sde2 sde3 sde4 sde5 sde6 sde7 sde8 sde9 sde10 sde11 sde12 sde13 sde14 sde15 sde16 sde17 sde18 sde19 sde20 sde21 sde22 sde23 sde24 sde25 sde26 sde27 sde28 sde29
1643[ 1.884579 / 01-01 00:00:01.879][0] sdf: sdf1 sdf2 sdf3 sdf4 sdf5
1644[ 1.884803 / 01-01 00:00:01.879][3] sdg: sdg1 sdg2
1645[ 1.885438 / 01-01 00:00:01.879][2] sda: sda1 sda2 sda3 sda4 sda5 sda6 sda7 sda8 sda9 sda10 sda11 sda12 sda13 sda14 sda15 sda16 sda17 sda18 sda19 sda20 sda21
1646[ 2.180074 / 01-01 00:00:02.179][0] SMBCHG: smbchg_parallel_usb_en_work: AICL at 1700
1647[ 2.180115 / 01-01 00:00:02.179][0] SMBCHG: smbchg_is_parallel_usb_ok: Not in fast charge, skipping
1648[ 2.180124 / 01-01 00:00:02.179][0] SMBCHG: smbchg_relax: relaxing: 0x00 (bit 1)
1649[ 2.690067 / 01-01 00:00:02.689][0] SMBCHG: smbchg_parallel_usb_en_work: AICL at 1700
1650[ 2.690099 / 01-01 00:00:02.689][0] SMBCHG: smbchg_is_parallel_usb_ok: Not in fast charge, skipping
1651[ 2.911966 / 01-01 00:00:02.909][3] FG: comp_temp_by_chg_current: fg_temp = 275 comp_temp1 = 245 comp_temp2 = 245 delta1 = -30 delta2 = 0 avg_chg_curr = 0 now_chg_curr = 0 batt_charging = 0
1652[ 2.912068 / 01-01 00:00:02.909][3] vote: name[SMBCHG: battchg_suspend], client_id[0], state[1], val[0]
1653[ 2.912080 / 01-01 00:00:02.909][3] SMBCHG: charging_suspend_vote_cb: client[0], suspend[1], last_client[0], last_suspend[1]
1654[ 2.921027 / 01-01 00:00:02.919][3] FG: update_sram_data: soc:[50], soc_raw[9849], voltage:[4321874], ocv:[4350407], current:[290525], batt_temp:[245], charge_raw [0 / 0]
1655[ 3.620087 / 01-01 00:00:03.619][1] determine_lge_charging_state : states_change[0], next_state[0], pseudo_chg_ui[0]
1656[ 3.620100 / 01-01 00:00:03.619][1] LGE charging scenario : state 0 -> 0(0-1), temp=24, volt=4321, BTM=0, charger=1, cur_set=0/0, chg_cur = 290
1657[ 3.620108 / 01-01 00:00:03.619][1] [LGE-CC] lge_monitor_batt_temp_work : ibatmax_set CHG_BATT_NORMAL_STATE
1658[ 3.620116 / 01-01 00:00:03.619][1] [LGE-CC] lge_monitor_batt_temp_work : otp_ibat_current=0
1659[ 3.620124 / 01-01 00:00:03.619][1] [LGE-CC] lge_monitor_batt_temp_work : chg_wake_locked
1660[ 3.620135 / 01-01 00:00:03.619][1] [LGE-CC] lge_monitor_batt_temp_work : Reported Capacity : 50 / voltage : 4321
1661[ 3.620144 / 01-01 00:00:03.619][1] lge_power_changed_work
1662[ 3.620160 / 01-01 00:00:03.619][1] SMBCHG: smbchg_external_lge_power_changed: [LGE-CC] fcc 3100, otp set 3100
1663[ 3.620168 / 01-01 00:00:03.619][1] SMBCHG: lgcc_set_ibat_current: chg_current[3100]
1664[ 3.620176 / 01-01 00:00:03.619][1] vote: name[SMBCHG: fcc], client_id[5], state[1], val[3100]
1665[ 3.620194 / 01-01 00:00:03.619][1] vote: name[SMBCHG: battchg_suspend], client_id[2], state[0], val[0]
1666[ 4.910223 / 01-01 00:00:04.909][3] FG: update_battery_type: battery_id : 187
1667[ 4.910236 / 01-01 00:00:04.909][3] of_batterydata_get_best_profile: LGE_BL44E1F_LGC_3200mAh found
1668[ 4.915318 / 01-01 00:00:04.909][3] FG: fg_set_minfreq: Set minfreq enable
1669[ 4.915369 / 01-01 00:00:04.909][3] FG: fg_batt_profile_init: vbat_est_diff = 2594, v_current_pred: 4324468, v:4321874
1670[ 4.916872 / 01-01 00:00:04.909][3] FG: fg_set_minfreq: Set minfreq disable
1671[ 4.916880 / 01-01 00:00:04.909][3] vote: name[SMBCHG: battchg_suspend], client_id[0], state[0], val[0]
1672[ 4.916891 / 01-01 00:00:04.909][3] SMBCHG: charging_suspend_vote_cb: client[0], suspend[0], last_client[0], last_suspend[0]
1673[ 4.922443 / 01-01 00:00:04.919][3] FG: fg_batt_profile_init: soc:[100], voltage:[4321874], ocv:[4350407], current:[290525], batt_temp:[245],cycle_count : [0], residence : [120605]
1674[ 4.922603 / 01-01 00:00:04.919][3] vote: name[SMBCHG: battchg_suspend], client_id[1], state[0], val[0]
1675[ 4.922662 / 01-01 00:00:04.919][3] SMBCHG: smbchg_cc_esr_wa_check: Not in fast charge, skipping
1676[ 4.922668 / 01-01 00:00:04.919][3] SMBCHG: smbchg_config_chg_battery_type: BATTERY FULL NAME : LGE_BL44E1F_LGC_3200mAh
1677[ 4.922706 / 01-01 00:00:04.919][3] vote: name[SMBCHG: usb_icl], client_id[0], state[1], val[0]
1678[ 4.922716 / 01-01 00:00:04.919][3] SMBCHG: smbchg_stay_awake: staying awake: 0x02 (bit 2)
1679[ 4.922721 / 01-01 00:00:04.919][3] SMBCHG: smbchg_vfloat_adjust_check: Starting vfloat adjustments
1680[ 4.922954 / 01-01 00:00:04.919][3] SMBCHG: smbchg_relax: relaxing: 0x00 (bit 2)
1681[ 4.933058 / 01-01 00:00:04.929][3] FG: update_sram_data: soc:[100], soc_raw[9849], voltage:[4321416], ocv:[4350407], current:[288236], batt_temp:[245], charge_raw [3119754 / 3167000]
1682[ 10.320093 / 01-01 00:00:10.319][1] pet_watchdog [enable : 1, jiffies : 4294938328, delay_time : 1000]
1683[ 20.340152 / 01-01 00:00:20.339][1] pet_watchdog [enable : 1, jiffies : 4294939330, delay_time : 1000]
1684[ 30.360112 / 01-01 00:00:30.359][1] pet_watchdog [enable : 1, jiffies : 4294940332, delay_time : 1000]
1685[ 31.040041 / 01-01 00:00:31.039][1] Calling earjack_debugger_set_uart
1686[ 32.086055 / 01-01 00:00:32.079][0] SMBCHG: lgcc_charger_reginfo: [STATUS] USB_PRESENT[1], PARALLEL_STATUS[3], USB_TYPE[SDP]
1687[ 32.086071 / 01-01 00:00:32.079][0] SMBCHG: lgcc_charger_reginfo: [STATUS] TOTAL_IUSB[0], PMI_IUSB[1700], SMB_IUSB[0]
1688[ 32.086080 / 01-01 00:00:32.079][0] SMBCHG: lgcc_charger_reginfo: [STATUS] TOTAL_IBAT[3100/3100(vote)], PMI_IBAT[3000], SMB_IBAT[1000]
1689[ 32.086088 / 01-01 00:00:32.079][0] SMBCHG: lgcc_charger_reginfo: [STATUS] CABLE_ID [OPEN], CABLE_INFO[SDP], USBIN_VOL[5017]
1690[ 32.086096 / 01-01 00:00:32.079][0] SMBCHG: lgcc_charger_reginfo: [STATUS] BATT_SOC[100], BATT_VOL[4321], BATT_TEMP[245], BATT_CUR[288236]
1691[ 32.086105 / 01-01 00:00:32.079][0] SMBCHG: lgcc_charger_reginfo: [STATUS] CHG_EN[Enable], CHG_STATE[DISCHARGING/DIS/NONE], SAFTY_STATE[Set/Not yet]
1692[ 32.086113 / 01-01 00:00:32.079][0] SMBCHG: lgcc_charger_reginfo: [STATUS] XO_tHERM[29], PA_THERM[27], BOARD_THERM[27] VTS[285]
1693[ 35.047736 / 01-01 00:00:35.039][3] FG: update_sram_data: soc:[100], soc_raw[9840], voltage:[4314244], ocv:[4350407], current:[287931], batt_temp:[247], charge_raw [3117262 / 3167000]
1694[ 40.380117 / 01-01 00:00:40.379][1] pet_watchdog [enable : 1, jiffies : 4294941334, delay_time : 1000]
1695[ 47.085989 / 01-01 00:00:47.079][0] SMBCHG: lgcc_charger_reginfo: [STATUS] USB_PRESENT[1], PARALLEL_STATUS[3], USB_TYPE[SDP]
1696[ 47.086004 / 01-01 00:00:47.079][0] SMBCHG: lgcc_charger_reginfo: [STATUS] TOTAL_IUSB[0], PMI_IUSB[1700], SMB_IUSB[0]
1697[ 47.086013 / 01-01 00:00:47.079][0] SMBCHG: lgcc_charger_reginfo: [STATUS] TOTAL_IBAT[3100/3100(vote)], PMI_IBAT[3000], SMB_IBAT[1000]
1698[ 47.086022 / 01-01 00:00:47.079][0] SMBCHG: lgcc_charger_reginfo: [STATUS] CABLE_ID [OPEN], CABLE_INFO[SDP], USBIN_VOL[4978]
1699[ 47.086030 / 01-01 00:00:47.079][0] SMBCHG: lgcc_charger_reginfo: [STATUS] BATT_SOC[100], BATT_VOL[4314], BATT_TEMP[247], BATT_CUR[287931]
1700[ 47.086039 / 01-01 00:00:47.079][0] SMBCHG: lgcc_charger_reginfo: [STATUS] CHG_EN[Enable], CHG_STATE[DISCHARGING/DIS/NONE], SAFTY_STATE[Set/Not yet]
1701[ 47.086047 / 01-01 00:00:47.079][0] SMBCHG: lgcc_charger_reginfo: [STATUS] XO_tHERM[30], PA_THERM[27], BOARD_THERM[27] VTS[290]
1702[ 50.400124 / 01-01 00:00:50.399][1] pet_watchdog [enable : 1, jiffies : 4294942336, delay_time : 1000]
1703[ 60.420115 / 01-01 00:01:00.419][1] pet_watchdog [enable : 1, jiffies : 4294943338, delay_time : 1000]
1704[ 61.920289 / 01-01 00:01:01.919][2] anx7688-usbc 6-0028: request_firmware failed -11
1705[ 61.920298 / 01-01 00:01:01.919][2] anx7688-usbc 6-0028: firmware alloc failed
1706[ 61.920798 / 01-01 00:01:01.919][2] anx7688-usbc 6-0028: VID: 0xaaaa PID: 0x7688 HWREV: 0xac STDALN FW: 0x208b
1707[ 61.925001 / 01-01 00:01:01.919][2] anx7688-usbc 6-0028: fail to request firmware
1708[ 61.925021 / 01-01 00:01:01.919][2] bus probe : 1672 anx7688-usbc 60252
1709[ 61.925122 / 01-01 00:01:01.919][2] anx7688-usbc: probe of 6-0028 failed with error -12
1710[ 61.928173 / 01-01 00:01:01.919][3] random: nonblocking pool is initialized
1711[ 61.928200 / 01-01 00:01:01.919][3] Creating CPU group 0
1712[ 61.928206 / 01-01 00:01:01.919][3] Init CPU0 state
1713[ 61.928211 / 01-01 00:01:01.919][3] Init CPU1 state
1714[ 61.928325 / 01-01 00:01:01.919][3] Creating CPU group 2
1715[ 61.928331 / 01-01 00:01:01.919][3] Init CPU2 state
1716[ 61.928335 / 01-01 00:01:01.919][3] Init CPU3 state
1717[ 61.928578 / 01-01 00:01:01.919][3] Loading compiled-in X.509 certificates
1718[ 61.929374 / 01-01 00:01:01.919][3] Loaded X.509 cert 'Magrathea: Glacier signing key: eafceb3cb4b20eaaf0dc6ee085212ee5496f69f3'
1719[ 61.930177 / 01-01 00:01:01.929][3] Key type encrypted registered
1720[ 61.976134 / 01-01 00:01:01.969][2] monitor-thermal soc:lge,monitor-thermal: LGE monitor thermal Initialized
1721[ 61.976817 / 01-01 00:01:01.969][2] power_sysfs_parse_dt : Total sysfs node is 57
1722[ 61.976830 / 01-01 00:01:01.969][2] power_sysfs_parse_dt : xo_therm path is mandatory
1723[ 61.976836 / 01-01 00:01:01.969][2] power_sysfs_parse_dt : batt_therm path is mandatory
1724[ 61.976860 / 01-01 00:01:01.969][2] power_sysfs_parse_dt : health path is mandatory
1725[ 61.976873 / 01-01 00:01:01.969][2] power_sysfs_parse_dt : status path is mandatory
1726[ 61.977138 / 01-01 00:01:01.969][2] power_sysfs_make_path : pa_therm0 user node didn't have kernel node
1727[ 61.977164 / 01-01 00:01:01.969][2] power_sysfs_make_path : ac_online user node didn't have kernel node
1728[ 61.977172 / 01-01 00:01:01.969][2] power_sysfs_make_path : wlc_online user node didn't have kernel node
1729[ 61.977185 / 01-01 00:01:01.969][2] power_sysfs_make_path : iusb_control user node didn't have kernel node
1730[ 61.977192 / 01-01 00:01:01.969][2] power_sysfs_make_path : wlc_thermal_mitigation user node didn't have kernel node
1731[ 61.977216 / 01-01 00:01:01.969][2] power_sysfs_make_path : speed_bin user node didn't have kernel node
1732[ 61.977222 / 01-01 00:01:01.969][2] power_sysfs_make_path : pvs_bin user node didn't have kernel node
1733[ 61.977241 / 01-01 00:01:01.969][2] power_sysfs_probe : Success Power sysfs Init
1734[ 61.977433 / 01-01 00:01:01.969][2] lge_boost_bypass_init : start
1735[ 61.977853 / 01-01 00:01:01.969][2] lge_boost_bypass_probe : probe
1736[ 61.977863 / 01-01 00:01:01.969][2] lge_boost_bypass_parse_dt : name = pmi8994_boostbypass / volt = 3600000/3400000
1737[ 61.977908 / 01-01 00:01:01.969][2] lge_boost_bypass_regulator_setup : regulator exist
1738[ 61.977914 / 01-01 00:01:01.969][2] lge_boost_bypass_regulator_setup : vote boost bypass set to on
1739[ 61.978053 / 01-01 00:01:01.969][3] lge_boost_bypass_probe : success
1740[ 61.978676 / 01-01 00:01:01.969][3] fastrpc soc:qcom,msm-adsprpc-mem: for adsp_rh segments only will be dumped.
1741[ 61.978741 / 01-01 00:01:01.969][3] adsprpc: channel link type: 0
1742[ 61.990799 / 01-01 00:01:01.989][0] RNDIS_IPA module is loaded.
1743[ 61.991238 / 01-01 00:01:01.989][3] android_usb 66bf0c8.android_usb: device tree enabled
1744[ 61.991405 / 01-01 00:01:01.989][3] usb_gadget_probe_driver
1745[ 61.991412 / 01-01 00:01:01.989][3] gadget name udc->gadget->name dwc3-gadget
1746[ 61.991417 / 01-01 00:01:01.989][0]
1747********************************************
1748[ 61.991421 / 01-01 00:01:01.989][3]
1749[ 61.991421 / 01-01 00:01:01.989][3] No of UDCs: 1
1750 driver->function: android_usb
1751[ 61.991432 / 01-01 00:01:01.989][3]
1752[ 61.991432 / 01-01 00:01:01.989][3] ********************************************
1753 udc->gadget->usb_core_id : 0
1754[ 61.991443 / 01-01 00:01:01.989][3]
1755[ 61.991443 / 01-01 00:01:01.989][3] driver->usb_core_id: 0
1756[ 61.991493 / 01-01 00:01:01.989][3] file system registered
1757[ 61.991524 / 01-01 00:01:01.989][3] mbim_init: initialize 1 instances
1758[ 61.991563 / 01-01 00:01:01.989][3] mbim_init: Initialized 1 ports
1759[ 61.992318 / 01-01 00:01:01.989][3] rndis_qc_init: initialize rndis QC instance
1760[ 61.992457 / 01-01 00:01:01.989][3] Number of LUNs=8
1761[ 61.992466 / 01-01 00:01:01.989][3] Mass Storage Function, version: 2009/09/11
1762[ 61.992472 / 01-01 00:01:01.989][3] LUN: removable file: (no medium)
1763[ 61.992485 / 01-01 00:01:01.989][3] Number of LUNs=1
1764[ 61.992509 / 01-01 00:01:01.989][3] LUN: removable file: (no medium)
1765[ 61.992514 / 01-01 00:01:01.989][3] Number of LUNs=1
1766[ 61.992684 / 01-01 00:01:01.989][3] evp_setup: evp_setup:
1767[ 61.992692 / 01-01 00:01:01.989][3] evp_get_product_string: evp_get_product_string: evp convert string, maxV=07E, minV=03C, feature=08
1768[ 61.992698 / 01-01 00:01:01.989][3] evp_get_product_string: evp_get_product_string: strings_evp = Maxim EVP gr8rFiV8US07E03C08
1769[ 61.992704 / 01-01 00:01:01.989][3] android_usb gadget: android_usb ready
1770[ 61.992710 / 01-01 00:01:01.989][3] udc->gadget->name: dwc3-gadget
1771[ 61.994956 / 01-01 00:01:01.989][3] hallic_dev switch registration success
1772[ 61.995077 / 01-01 00:01:01.989][3] input: gpio-keys as /devices/soc/soc:gpio_keys/input/input2
1773[ 61.996250 / 01-01 23:37:38.500][3] qcom,qpnp-rtc qpnp-rtc-8: setting system clock to 2016-01-01 23:37:38 UTC (1451691458)
1774[ 61.998610 / 01-01 23:37:38.500][3] power_supply_callback: BCL state of SoC is 1
1775[ 62.005322 / 01-01 23:37:38.500][1] lmh_lite:lmh_parse_sensor Registering sensor:[DLMt_APC1]
1776[ 62.005614 / 01-01 23:37:38.500][0] lmh_lite:lmh_parse_sensor Registering sensor:[LLM_cp00]
1777[ 62.005810 / 01-01 23:37:38.500][0] lmh_lite:lmh_parse_sensor Registering sensor:[LLM_cp01]
1778[ 62.005987 / 01-01 23:37:38.500][0] lmh_lite:lmh_parse_sensor Registering sensor:[LLM_cp10]
1779[ 62.006165 / 01-01 23:37:38.500][0] lmh_lite:lmh_parse_sensor Registering sensor:[LLM_cp11]
1780[ 62.006336 / 01-01 23:37:38.500][0] lmh_lite:lmh_parse_sensor Registering sensor:[LLM_m4m0]
1781[ 62.006507 / 01-01 23:37:38.500][0] lmh_lite:lmh_parse_sensor Registering sensor:[LLM_l21-]
1782[ 62.006676 / 01-01 23:37:38.500][3] lmh_lite:lmh_parse_sensor Registering sensor:[LLM_l20-]
1783[ 62.009823 / 01-01 23:37:38.500][0] vts_probe: vts: xo_therm is registered. chan=114, weight=500
1784[ 62.009850 / 01-01 23:37:38.500][0] vts_probe: vts: bd_therm_2 is registered. chan=116, weight=270
1785[ 62.009862 / 01-01 23:37:38.500][0] vts_probe: vts: Add 2 adc(s).
1786[ 62.009870 / 01-01 23:37:38.500][0] vts_probe: vts: probe done.
1787[ 62.009934 / 01-01 23:37:38.500][0] vts_probe: led_sensor: All of adc sensors are disabled.
1788[ 62.010288 / 01-01 23:37:38.509][0] vts_probe: led_sensor: Add 0 adc(s).
1789[ 62.010296 / 01-01 23:37:38.509][0] vts_probe: led_sensor: probe done.
1790[ 62.010732 / 01-01 23:37:38.509][0] gpio_keys_gpio_report_event: code(115) state(0)
1791[ 62.010747 / 01-01 23:37:38.509][0] gpio_keys_gpio_report_event: code(222) state(0)
1792[ 62.011977 / 01-01 23:37:38.509][0] parse_cpu_levels: idx 1 545
1793[ 62.011990 / 01-01 23:37:38.509][0] parse_cpu_levels: idx 2 6022
1794[ 62.011998 / 01-01 23:37:38.509][0] parse_cpu_levels: idx 2 11499
1795[ 62.012452 / 01-01 23:37:38.509][0] parse_cpu_levels: idx 1 545
1796[ 62.012460 / 01-01 23:37:38.509][0] parse_cpu_levels: idx 2 6022
1797[ 62.012467 / 01-01 23:37:38.509][0] parse_cpu_levels: idx 2 11499
1798[ 62.016666 / 01-01 23:37:38.509][0] qcom,qpnp-flash-led qpnp-flash-led-26: Unable to acquire pinctrl
1799[ 62.019863 / 01-01 23:37:38.509][0] rmnet_ipa started initialization
1800[ 62.019886 / 01-01 23:37:38.509][0] IPA SSR support = True
1801[ 62.019900 / 01-01 23:37:38.509][0] IPA ipa-loaduC = True
1802[ 62.019914 / 01-01 23:37:38.509][0] IPA SG support = True
1803[ 62.021552 / 01-01 23:37:38.519][3] ipa ipa_sps_irq_control_all:937 EP (5) not allocated.
1804[ 62.021563 / 01-01 23:37:38.519][3] ipa ipa2_uc_state_check:301 uC is not loaded
1805[ 62.022244 / 01-01 23:37:38.519][3] rmnet_ipa completed initialization
1806[ 62.027840 / 01-01 23:37:38.519][3] qcom,cc-debug-8996 362000.qcom,cc-debug: Registered debug mux.
1807[ 62.028688 / 01-01 23:37:38.519][3] usb_otg_vreg: disabling
1808[ 62.028765 / 01-01 23:37:38.519][3] gdsc_mmagic_bimc: disabling
1809[ 62.028808 / 01-01 23:37:38.519][3] kryo1-retention: disabling
1810[ 62.028815 / 01-01 23:37:38.519][3] kryo0-retention: disabling
1811[ 62.028820 / 01-01 23:37:38.519][3] gfx_mem_acc_corner: disabling
1812[ 62.028826 / 01-01 23:37:38.519][3] apcc_l3_mem_acc_corner: disabling
1813[ 62.028831 / 01-01 23:37:38.519][3] apc1_perfcl_mem_acc_corner: disabling
1814[ 62.028836 / 01-01 23:37:38.519][3] apc0_pwrcl_mem_acc_corner: disabling
1815[ 62.028847 / 01-01 23:37:38.519][3] regulator_proxy_consumer_remove_all: removing regulator proxy consumer requests
1816[ 62.029132 / 01-01 23:37:38.519][3] dhd_module_init in
1817[ 62.029383 / 01-01 23:37:38.519][3] found wifi platform device bcmdhd_wlan
1818[ 62.029834 / 01-01 23:37:38.519][3] Power-up adapter 'DHD generic adapter'
1819[ 62.029841 / 01-01 23:37:38.519][3] wifi_platform_set_power = 1
1820[ 62.029879 / 01-01 23:37:38.519][3] [BRCM]: gpio_direction_output(1011,1)! ret = 0
1821[ 62.035076 / 01-01 23:37:38.529][0] msm_pcie_enable: PCIe: Assert the reset of endpoint of RC0.
1822[ 62.038589 / 01-01 23:37:38.529][0] msm_pcie_enable: PCIe RC0 PHY is ready!
1823[ 62.048682 / 01-01 23:37:38.539][0] msm_pcie_enable: PCIe: Release the reset of endpoint of RC0.
1824[ 62.084169 / 01-01 23:37:38.579][0] msm_pcie_enable: PCIe RC0 link initialized
1825[ 62.084272 / 01-01 23:37:38.579][0] PCI host bridge /soc/qcom,pcie@00600000 ranges:
1826[ 62.084284 / 01-01 23:37:38.579][0] No bus range found for /soc/qcom,pcie@00600000, using [bus 00-ff]
1827[ 62.084303 / 01-01 23:37:38.579][0] IO 0x0c200000..0x0c2fffff -> 0x0c200000
1828[ 62.084315 / 01-01 23:37:38.579][0] MEM 0x0c300000..0x0cffffff -> 0x0c300000
1829[ 62.085866 / 01-01 23:37:38.579][0] SMBCHG: lgcc_charger_reginfo: [STATUS] USB_PRESENT[1], PARALLEL_STATUS[3], USB_TYPE[SDP]
1830[ 62.085876 / 01-01 23:37:38.579][0] SMBCHG: lgcc_charger_reginfo: [STATUS] TOTAL_IUSB[0], PMI_IUSB[1700], SMB_IUSB[0]
1831[ 62.085885 / 01-01 23:37:38.579][0] SMBCHG: lgcc_charger_reginfo: [STATUS] TOTAL_IBAT[3100/3100(vote)], PMI_IBAT[3000], SMB_IBAT[1000]
1832[ 62.085893 / 01-01 23:37:38.579][0] SMBCHG: lgcc_charger_reginfo: [STATUS] CABLE_ID [OPEN], CABLE_INFO[SDP], USBIN_VOL[4974]
1833[ 62.085902 / 01-01 23:37:38.579][0] SMBCHG: lgcc_charger_reginfo: [STATUS] BATT_SOC[100], BATT_VOL[4314], BATT_TEMP[247], BATT_CUR[287931]
1834[ 62.085910 / 01-01 23:37:38.579][0] SMBCHG: lgcc_charger_reginfo: [STATUS] CHG_EN[Enable], CHG_STATE[DISCHARGING/DIS/NONE], SAFTY_STATE[Set/Not yet]
1835[ 62.085920 / 01-01 23:37:38.579][0] SMBCHG: lgcc_charger_reginfo: [STATUS] XO_tHERM[30], PA_THERM[27], BOARD_THERM[27] VTS[290]
1836[ 62.094454 / 01-01 23:37:38.589][0] pci-msm 600000.qcom,pcie: PCI host bridge to bus 0000:00
1837[ 62.094467 / 01-01 23:37:38.589][0] pci_bus 0000:00: root bus resource [bus 00-ff]
1838[ 62.094478 / 01-01 23:37:38.589][0] pci_bus 0000:00: root bus resource [io 0x0000-0xfffff] (bus address [0xc200000-0xc2fffff])
1839[ 62.094487 / 01-01 23:37:38.589][0] pci_bus 0000:00: root bus resource [mem 0x0c300000-0x0cffffff]
1840[ 62.094546 / 01-01 23:37:38.589][0] msm_pcie_oper_conf: Read of RC0 0:0x00 + 0x0014[4] is all FFs
1841[ 62.094581 / 01-01 23:37:38.589][0] pci 0000:00:00.0: IOMMU is currently not supported for PCI
1842[ 62.094650 / 01-01 23:37:38.589][0] pci 0000:00:00.0: of_irq_parse_pci() failed with rc=-19
1843[ 62.094944 / 01-01 23:37:38.589][0] pci 0000:00:00.0: bridge configuration invalid ([bus 00-00]), reconfiguring
1844[ 62.095333 / 01-01 23:37:38.589][0] msm_pcie_oper_conf: Read of RC0 1:0x00 + 0x0014[4] is all FFs
1845[ 62.095425 / 01-01 23:37:38.589][0] msm_pcie_oper_conf: Read of RC0 1:0x00 + 0x001c[4] is all FFs
1846[ 62.095549 / 01-01 23:37:38.589][0] pci 0000:01:00.0: IOMMU is currently not supported for PCI
1847[ 62.096154 / 01-01 23:37:38.589][0] msm_pcie_oper_conf: Read of RC0 0:0x00 + 0x0028[4] is all FFs
1848[ 62.096171 / 01-01 23:37:38.589][0] pci 0000:00:00.0: BAR 8: assigned [mem 0x0c400000-0x0c9fffff]
1849[ 62.096182 / 01-01 23:37:38.589][0] pci 0000:00:00.0: BAR 0: assigned [mem 0x0c300000-0x0c300fff 64bit]
1850[ 62.096200 / 01-01 23:37:38.589][0] pci 0000:01:00.0: BAR 2: assigned [mem 0x0c400000-0x0c7fffff 64bit]
1851[ 62.096384 / 01-01 23:37:38.589][0] pci 0000:01:00.0: BAR 0: assigned [mem 0x0c800000-0x0c807fff 64bit]
1852[ 62.096463 / 01-01 23:37:38.589][0] pci 0000:00:00.0: PCI bridge to [bus 01]
1853[ 62.096482 / 01-01 23:37:38.589][0] pci 0000:00:00.0: bridge window [mem 0x0c400000-0x0c9fffff]
1854[ 62.179894 / 01-01 23:37:38.669][3] bcm_wifi_set_power: wifi power successed to pull up
1855[ 62.179901 / 01-01 23:37:38.669][3] wifi_platform_bus_enumerate device present 1
1856[ 62.179908 / 01-01 23:37:38.669][3] msm_pcie_enumerate: PCIe: RC0 has already been enumerated.
1857[ 62.179913 / 01-01 23:37:38.669][3] [BRCM] Card detect done
1858[ 62.179949 / 01-01 23:37:38.669][3] PCI_PROBE: bus 1, slot 0,vendor 14E4, device 43E9(good PCI location)
1859[ 62.179956 / 01-01 23:37:38.669][3] dhdpcie_init: found adapter info 'DHD generic adapter'
1860[ 62.179967 / 01-01 23:37:38.669][3] alloc static buf at ffffffc0f5540000!
1861[ 62.180406 / 01-01 23:37:38.679][3] pcieh 0000:01:00.0: enabling device (0000 -> 0002)
1862[ 62.181612 / 01-01 23:37:38.679][3] DHD: dongle ram size is set to 786432(orig 786432) at 0x180000
1863[ 62.181619 / 01-01 23:37:38.679][3] request DHD_INFO size(25600) is bigger than static size(24576).
1864[ 62.181624 / 01-01 23:37:38.679][3] wifi_platform_prealloc: failed to alloc static mem section 7
1865[ 62.181632 / 01-01 23:37:38.679][3] wifi_platform_get_mac_addr
1866[ 62.181640 / 01-01 23:37:38.679][3] [bcm_wifi_get_mac_addr] Exiting. MyMac : 0 : 90 : 4c : dc : 61 :ac
1867[ 62.181710 / 01-01 23:37:38.679][0] CFG80211-INFO2) wl_setup_wiphy : Registering Vendor80211
1868[ 62.181975 / 01-01 23:37:38.679][3] wl_create_event_handler(): thread:wl_event_handler:1ac started
1869[ 62.181982 / 01-01 23:37:38.679][2] CFG80211-INFO2) wl_event_handler : tsk Enter, tsk = 0xffffffc040de2cf0
1870[ 62.182127 / 01-01 23:37:38.679][3] dhd_attach(): thread:dhd_watchdog_thread:1ad started
1871[ 62.182188 / 01-01 23:37:38.679][3] dhd_attach(): thread:dhd_rpm_state_thread:1ae started
1872[ 62.182197 / 01-01 23:37:38.679][3] dhd_deferred_work_init: work queue initialized
1873[ 62.182204 / 01-01 23:37:38.679][3] DHD LOAD BALANCING Enabled
1874[ 62.182654 / 01-01 23:37:38.679][3] Dongle Host Driver, version 1.78.5 (r)
1875[ 62.182654 / 01-01 23:37:38.679][3] Compiled in drivers/net/wireless/bcmdhd on 3.18.31-lge-h918-1.0
1876[ 62.182914 / 01-01 23:37:38.679][3] Register interface [wlan0] MAC: 00:90:4c:ba:c7:ac
1877[ 62.182914 / 01-01 23:37:38.679][3]
1878[ 62.182935 / 01-01 23:37:38.679][0] CFG80211-INFO2) wl_event_handler : was terminated
1879[ 62.182954 / 01-01 23:37:38.679][3] wl_destroy_event_handler(): thread:wl_event_handler:1ac terminated OK
1880[ 62.182962 / 01-01 23:37:38.679][3] dhd_wl_ioctl: returning as busstate=0
1881[ 62.182968 / 01-01 23:37:38.679][3] dhd_bus_devreset: == Power OFF ==
1882[ 62.182979 / 01-01 23:37:38.679][3] dhdpcie_oob_intr_unregister: irq is not registered
1883[ 62.193440 / 01-01 23:37:38.689][3] msm_pcie_disable: PCIe: Assert the reset of endpoint of RC0.
1884[ 62.194467 / 01-01 23:37:38.689][3] dhd_bus_devreset: WLAN OFF Done
1885[ 62.194473 / 01-01 23:37:38.689][3] wifi_platform_set_power = 0
1886[ 62.194504 / 01-01 23:37:38.689][3] [BRCM]: gpio_direction_output(1011,0)! ret = 0
1887[ 62.194509 / 01-01 23:37:38.689][3] bcm_wifi_set_power: wifi power successed to pull down
1888[ 62.194566 / 01-01 23:37:38.689][3] drv probe : 62029 bcmdhd_wlan 164
1889[ 62.194656 / 01-01 23:37:38.689][3] dhd_module_init out
1890[ 62.198330 / 01-01 23:37:38.689][3] clock_late_init: Removing enables held for handed-off clocks
1891[ 62.202752 / 01-01 23:37:38.699][2] ALSA device list:
1892[ 62.202764 / 01-01 23:37:38.699][2] No soundcards found.
1893[ 62.203103 / 01-01 23:37:38.699][2] RAMDISK: gzip image found at block 0
1894[ 62.270339 / 01-01 23:37:38.769][2] RAMDISK: incomplete write (21718 != 32768)
1895[ 62.270353 / 01-01 23:37:38.769][2] write error
1896[ 62.270460 / 01-01 23:37:38.769][2] VFS: Cannot open root device "(null)" or unknown-block(0,0): error -6
1897[ 62.270467 / 01-01 23:37:38.769][2] Please append a correct "root=" boot option; here are the available partitions:
1898[ 62.270491 / 01-01 23:37:38.769][0] b300 250085376 mmcblk0 driver: mmcblk
1899[ 62.270500 / 01-01 23:37:38.769][0] b301 250052608 mmcblk0p1 00000000-01
1900[ 62.270508 / 01-01 23:37:38.769][0] 0820 8192 sdc driver: sd
1901[ 62.270517 / 01-01 23:37:38.769][0] 0821 3072 sdc1 79aef49e-4048-1da2-f233-e4df07127d9c
1902[ 62.270524 / 01-01 23:37:38.769][0] 0822 3072 sdc2 b17ab3de-a6f0-a279-8492-a31afa12b718
1903[ 62.270531 / 01-01 23:37:38.769][0] 0823 4 sdc3 74d2337e-af79-6aa7-1c12-396b7db89e79
1904[ 62.270538 / 01-01 23:37:38.769][0] 0860 8192 sdg driver: sd
1905[ 62.270546 / 01-01 23:37:38.769][0] 0861 2048 sdg1 80ec665f-b03a-08e7-8eea-d86850469bde
1906[ 62.270553 / 01-01 23:37:38.769][0] 0862 4 sdg2 97ed8daf-0981-0642-3bd4-f9a5b85876a2
1907[ 62.270560 / 01-01 23:37:38.769][0] 0800 62185472 sda driver: sd
1908[ 62.270567 / 01-01 23:37:38.769][0] 0801 49152 sda1 a3c7cbb7-dcf3-290b-1633-43ce51a19d6e
1909[ 62.270574 / 01-01 23:37:38.769][0] 0802 32768 sda2 9c8660c8-3a48-f5e8-94ad-c4df7d200701
1910[ 62.270581 / 01-01 23:37:38.769][0] 0803 10240 sda3 ce0edb2d-6e62-4db0-9485-c511a8ffa0a8
1911[ 62.270588 / 01-01 23:37:38.769][0] 0804 6144 sda4 fb790fa2-bcb2-8bbd-260a-4e335536813c
1912[ 62.270594 / 01-01 23:37:38.769][0] 0805 32768 sda5 66a57c74-4d41-000a-dbb9-87de43066b69
1913[ 62.270601 / 01-01 23:37:38.769][0] 0806 16384 sda6 6fb3d5d1-216e-e1f4-941c-5366bd1fcdc0
1914[ 62.270608 / 01-01 23:37:38.769][0] 0807 8192 sda7 87c54ca7-c4e9-81a8-f916-52243393fa26
1915[ 62.270615 / 01-01 23:37:38.769][0] 0808 40960 sda8 54579dfa-1dda-c0ce-878c-728129a83896
1916[ 62.270622 / 01-01 23:37:38.769][0] 0809 67584 sda9 671c8c8a-00b3-d182-4934-c85f973bcfb0
1917[ 62.270628 / 01-01 23:37:38.769][0] 080a 512 sda10 a4fb6b2b-26da-0e1c-aea7-ccb6cfceb1b0
1918[ 62.270635 / 01-01 23:37:38.769][0] 080b 512 sda11 0c943b53-918b-2d4c-5d6e-a7f8904fb128
1919[ 62.270643 / 01-01 23:37:38.769][0] 080c 512 sda12 9496cd31-1e12-1380-c642-f24af486c31e
1920[ 62.270649 / 01-01 23:37:38.769][0] 080d 512 sda13 ad2845bc-f2b5-18be-9706-fdadb95b3919
1921[ 62.270656 / 01-01 23:37:38.769][0] 080e 512 sda14 317bb610-924c-0df3-37bc-d19e7ba4a79d
1922[ 62.270663 / 01-01 23:37:38.769][0] 080f 65536 sda15 55227bcd-d01b-9620-bb13-e0b384fb1d03
1923[ 62.270670 / 01-01 23:37:38.769][0] 103:0000b 32768 sda16 3875d4f8-e2b6-dcd3-33a4-44d302dd1650
1924[ 62.270677 / 01-01 23:37:38.769][0] 103:0000d 49152 sda17 8ee85b49-d0fe-3c85-ec45-9d6de5eca218
1925[ 62.270684 / 01-01 23:37:38.769][0] 103:0000f 5726208 sda18 43db18f7-ea88-4a77-73ca-192fb8202186
1926[ 62.270690 / 01-01 23:37:38.769][0] 103:00011 1261568 sda19 8bec7551-0558-ce35-9210-d1ef70a7f8ff
1927[ 62.270697 / 01-01 23:37:38.769][0] 103:00012 54779904 sda20 c2ee3351-6289-de21-3d73-3c7c9a418ba7
1928[ 62.270704 / 01-01 23:37:38.769][0] 103:00013 3540 sda21 ca5773c3-7173-6f47-6245-532505b8d6d6
1929[ 62.270711 / 01-01 23:37:38.769][0] 0840 237568 sde driver: sd
1930[ 62.270718 / 01-01 23:37:38.769][0] 0841 40960 sde1 de10b229-5149-ce9b-ac51-5138e3dcf857
1931[ 62.270725 / 01-01 23:37:38.769][0] 0842 41472 sde2 36bb4289-2f04-31eb-b6e2-a99d9a5ba3de
1932[ 62.270732 / 01-01 23:37:38.769][0] 0843 41472 sde3 6d3bea2f-4905-4778-87c8-15dd782a35bf
1933[ 62.270738 / 01-01 23:37:38.769][0] 0844 2048 sde4 e7b690a6-dcd1-c4ff-c25e-8caae947e04e
1934[ 62.270744 / 01-01 23:37:38.769][0] 0845 2048 sde5 ab129929-040a-53c8-71ca-aa5da206a7bf
1935[ 62.270751 / 01-01 23:37:38.769][0] 0846 2048 sde6 ee1bd76e-d169-fb92-f861-8d60d373991c
1936[ 62.270757 / 01-01 23:37:38.769][0] 0847 2048 sde7 10baacf2-b005-c1ea-50f7-39f8d8ee390e
1937[ 62.270763 / 01-01 23:37:38.769][0] 0848 4096 sde8 3d705e9e-7f4a-32c4-6fdd-2308740ea4b5
1938[ 62.270770 / 01-01 23:37:38.769][0] 0849 4096 sde9 f1a7eaae-0532-88a4-bdc4-3938841009f5
1939[ 62.270776 / 01-01 23:37:38.769][0] 084a 512 sde10 b191b2f6-14dd-de4a-0289-03bdff4d9d0f
1940[ 62.270783 / 01-01 23:37:38.769][0] 084b 512 sde11 b52e9e4f-3510-79e5-45fd-33ed7ff4480a
1941[ 62.270789 / 01-01 23:37:38.769][0] 084c 512 sde12 9f66145b-4690-a420-fc7d-bdfdd082ebd3
1942[ 62.270796 / 01-01 23:37:38.769][0] 084d 512 sde13 bf10066b-5131-647a-6783-2c84a74db175
1943[ 62.270802 / 01-01 23:37:38.769][0] 084e 512 sde14 102109fc-8873-c0de-7b6d-1cc86d6a6e77
1944[ 62.270808 / 01-01 23:37:38.769][0] 084f 512 sde15 800c032d-81d6-8f6d-1193-db03a57189c9
1945[ 62.270814 / 01-01 23:37:38.769][0] 103:00000 128 sde16 d12d3039-3a5d-2bcb-b611-0f3761e47108
1946[ 62.270820 / 01-01 23:37:38.769][0] 103:00001 128 sde17 adf0f8c3-f09d-aa6e-11b4-da83b119a3f8
1947[ 62.270827 / 01-01 23:37:38.769][0] 103:00002 88064 sde18 da7ff363-224d-04d0-e107-4f02c0a50a94
1948[ 62.270833 / 01-01 23:37:38.769][0] 103:00003 512 sde19 3b9cd357-95f5-b6f5-37b4-f65b621c0119
1949[ 62.270839 / 01-01 23:37:38.769][0] 103:00004 512 sde20 ce116def-606a-3dc6-6e53-819c1531ab30
1950[ 62.270846 / 01-01 23:37:38.769][0] 103:00005 512 sde21 68c9af09-1cd7-e925-2117-63ddfad786b8
1951[ 62.270852 / 01-01 23:37:38.769][0] 103:00006 512 sde22 305d49f1-3bc0-2333-188b-5361e71071bf
1952[ 62.270858 / 01-01 23:37:38.769][0] 103:00007 512 sde23 fb06cea2-e3c9-8846-ffc2-d7b7614f73bc
1953[ 62.270864 / 01-01 23:37:38.769][0] 103:00008 512 sde24 d35c67a9-889b-a0e7-1a7b-392146d1c6fe
1954[ 62.270870 / 01-01 23:37:38.769][0] 103:00009 512 sde25 60f52800-b8d6-d377-e29d-c2b47e8e2f80
1955[ 62.270877 / 01-01 23:37:38.769][0] 103:0000a 512 sde26 ecd6d089-6f6e-9c9a-926c-ada7b7aa3b6a
1956[ 62.270883 / 01-01 23:37:38.769][0] 103:0000c 512 sde27 539c0c4d-1c36-7375-c507-b80574f4e827
1957[ 62.270889 / 01-01 23:37:38.769][0] 103:0000e 512 sde28 61554f68-db2e-44c0-1d5e-fb1a59ecee70
1958[ 62.270896 / 01-01 23:37:38.769][0] 103:00010 4 sde29 5603f622-1292-f51f-c0e8-3517fd3122c9
1959[ 62.270902 / 01-01 23:37:38.769][0] 0830 8192 sdd driver: sd
1960[ 62.270910 / 01-01 23:37:38.769][0] 0831 2048 sdd1 c744f2ea-11e0-3849-9fe1-db66b096b63b
1961[ 62.270916 / 01-01 23:37:38.769][0] 0832 32 sdd2 d71074fb-e1f2-97da-f83d-5e4483f3eb18
1962[ 62.270923 / 01-01 23:37:38.769][0] 0833 4 sdd3 e540d098-76e6-48cb-32a4-7c36bab1d03c
1963[ 62.270929 / 01-01 23:37:38.769][0] 0834 4096 sdd4 fc6496ad-dcec-03bd-02d8-91bcc6ac8e77
1964[ 62.270935 / 01-01 23:37:38.769][0] 0835 4 sdd5 4ecbc47b-e031-4620-93d4-0578d73a2ff9
1965[ 62.270942 / 01-01 23:37:38.769][0] 0850 8192 sdf driver: sd
1966[ 62.270949 / 01-01 23:37:38.769][0] 0851 2048 sdf1 b51f35e9-9a19-e73e-b196-9adfbb41cb65
1967[ 62.270955 / 01-01 23:37:38.769][0] 0852 2048 sdf2 ba92be03-11f2-ea98-9f5e-2849b85641a1
1968[ 62.270961 / 01-01 23:37:38.769][0] 0853 512 sdf3 43c0ae9a-ab72-799e-af09-57a334af2057
1969[ 62.270968 / 01-01 23:37:38.769][0] 0854 2048 sdf4 0e9423fe-c3bc-943e-8761-b4f3eaec13cd
1970[ 62.270975 / 01-01 23:37:38.769][0] 0855 4 sdf5 68f11444-84ea-691b-2106-c1d0fa781951
1971[ 62.270981 / 01-01 23:37:38.769][0] 0810 16384 sdb driver: sd
1972[ 62.270988 / 01-01 23:37:38.769][0] 0811 3072 sdb1 6f234b0c-b2e4-abf4-c63f-88abecdb713d
1973[ 62.270994 / 01-01 23:37:38.769][0] 0812 3072 sdb2 738b4462-a843-d622-6d74-fb637c5802e7
1974[ 62.271001 / 01-01 23:37:38.769][0] 0813 4096 sdb3 eb50166a-62cb-5d41-a8f0-c523fffce994
1975[ 62.271007 / 01-01 23:37:38.769][0] 0814 2048 sdb4 ac20d93b-dc68-92b1-922a-56cbdc905055
1976[ 62.271013 / 01-01 23:37:38.769][0] 0815 1024 sdb5 62f57a86-a35a-a788-4d51-45e56c04a0c9
1977[ 62.271019 / 01-01 23:37:38.769][0] 0816 1024 sdb6 2ad62d7f-626c-a732-5caa-0cff5da76f75
1978[ 62.271025 / 01-01 23:37:38.769][0] 0817 4 sdb7 9e2b9d16-6757-fcb9-9ceb-ea3b8a957f7b
1979[ 62.271058 / 01-01 23:37:38.769][2] lge_pet_watchdog
1980[ 62.271065 / 01-01 23:37:38.769][2] Kernel panic - not syncing: VFS: Unable to mount root fs on unknown-block(0,0)
1981[ 62.271078 / 01-01 23:37:38.769][1] CPU1: stopping
1982[ 62.271090 / 01-01 23:37:38.769][1]
1983[ 62.271101 / 01-01 23:37:38.769][1] CPU: 1 PID: 0 Comm: swapper/1 Not tainted 3.18.31-lge-h918-1.0 #1
1984[ 62.271108 / 01-01 23:37:38.769][1] Hardware name: Qualcomm Technologies, Inc. MSM 8996 v3.x + PMI8996 MTP (DT)
1985[ 62.271118 / 01-01 23:37:38.769][1] task: ffffffc0f8896e00 ti: ffffffc0f8a9c000 task.ti: ffffffc0f8a9c000
1986[ 62.271133 / 01-01 23:37:38.769][1] PC is at lpm_cpuidle_enter+0x4b8/0x5bc
1987[ 62.271142 / 01-01 23:37:38.769][1] LR is at lpm_cpuidle_enter+0x4a0/0x5bc
1988[ 62.271150 / 01-01 23:37:38.769][1] pc : [<ffffffc0008b53fc>] lr : [<ffffffc0008b53e4>] pstate: 60000145
1989[ 62.271157 / 01-01 23:37:38.769][1] sp : ffffffc0f8a9fe90
1990[ 62.271164 / 01-01 23:37:38.769][0] x29: ffffffc0f8a9fe90 x28: 0000000e7fa4f1b9
1991[ 62.271174 / 01-01 23:37:38.769][0] x27: ffffffc040e45418 x26: ffffffc040e45418
1992[ 62.271184 / 01-01 23:37:38.769][0] x25: ffffffc0fe322800 x24: 0000000e7f9542a0
1993[ 62.271194 / 01-01 23:37:38.769][0] x23: 0000000000000001 x22: ffffffc040e24018
1994[ 62.271204 / 01-01 23:37:38.769][0] x21: ffffffc040e45418 x20: ffffffc0015ed760
1995[ 62.271214 / 01-01 23:37:38.769][0] x19: 0000000000000000 x18: ffffffc0fe3236f0
1996[ 62.271223 / 01-01 23:37:38.769][0] x17: 0000000000000000 x16: 0000000000001b4c
1997[ 62.271232 / 01-01 23:37:38.769][0] x15: dead000000000200 x14: ffffffc0f8894200
1998[ 62.271241 / 01-01 23:37:38.769][0] x13: 0000000000000000 x12: 0000000000000000
1999[ 62.271250 / 01-01 23:37:38.769][0] x11: 0000000000989680 x10: 0000000e7f9521ab
2000[ 62.271258 / 01-01 23:37:38.769][0] x9 : ffffffc0f8a9fd90 x8 : ffffffc0f88973a0
2001[ 62.271267 / 01-01 23:37:38.769][0] x7 : 0000000000000003 x6 : 0000000000000bb4
2002[ 62.271276 / 01-01 23:37:38.769][0] x5 : 0000000050195406 x4 : 00ffffffffffffff
2003[ 62.271284 / 01-01 23:37:38.769][0] x3 : 002de5447fe5a200 x2 : 00000000000003e8
2004[ 62.271294 / 01-01 23:37:38.769][0] x1 : 0000000000000404 x0 : 000000000000007d
2005[ 62.271303 / 01-01 23:37:38.769][1]
2006[ 62.271303 / 01-01 23:37:38.769][1] PC: 0xffffffc0008b52fc:
2007[ 62.271313 / 01-01 23:37:38.769][0] 52fc 9272c400 f94352d5 b9405400 b9008fa0 f9403fa0 8b0002bb 39403360 35000080
2008[ 62.271338 / 01-01 23:37:38.769][0] 531c b94692c0 6b00027f 5400008b 910233a1 d28000a0 97e144ad b9400b60 51000800
2009[ 62.271361 / 01-01 23:37:38.769][0] 533c 7100041f 540000a9 d2800a00 9b00575a 39412340 34000040 97e228b9 910003e0
2010[ 62.271384 / 01-01 23:37:38.769][0] 535c 9119c294 9272c400 52800003 52800002 52800001 9103c294 b9405400 97e038ac
2011[ 62.271408 / 01-01 23:37:38.769][0] 537c b9400a80 7100001f 540002ed 910003e0 f0002123 9272c401 52800800 f9448863
2012[ 62.271432 / 01-01 23:37:38.769][0] 539c b9405422 1ac00c40 937d7c00 f8606860 9ac22400 36000180 b9405020 11000400
2013[ 62.271456 / 01-01 23:37:38.769][0] 53bc b9005020 f9401294 b5000854 910003e0 9272c401 b9405020 51000400 b9005020
2014[ 62.271480 / 01-01 23:37:38.769][0] 53dc 34000860 97e12e75 cb180000 d2807d02 9ac20801 9b028020 b9000b20 d50342ff
2015[ 62.271503 / 01-01 23:37:38.769][0] 53fc 2a1303e0 a94153f3 a9425bf5 a94363f7 a9446bf9 a94573fb a8c97bfd d65f03c0
2016[ 62.271527 / 01-01 23:37:38.769][0] 541c a94002e2 2a1303e1 d63f0040 f8410ee0 b5ffff80 17ffff25 f9400020 360fe520
2017[ 62.271550 / 01-01 23:37:38.769][0] 543c 941071be 17ffff27 a9400086 aa0503e3 aa1703e2 2a1c03e1 a90613a5 d63f00c0
2018[ 62.271574 / 01-01 23:37:38.769][0] 545c a94613a5 f8410c80 b5ffff00 17ffff49 f9400020 360fe9a0 941071b0 17ffff4b
2019[ 62.271597 / 01-01 23:37:38.769][0] 547c 2a1303e1 aa1603e0 52800022 97fffe25 53001c17 17ffff63 a9400086 aa0503e3
2020[ 62.271621 / 01-01 23:37:38.769][0] 549c b94077a1 aa1b03e2 a90613a5 d63f00c0 a94613a5 f8410c80 b5ffff00 17ffff84
2021[ 62.271644 / 01-01 23:37:38.769][0] 54bc f9400020 360ff100 9410719c 17ffff86 a9400283 2a1703e2 2a1303e1 d63f0060
2022[ 62.271668 / 01-01 23:37:38.769][0] 54dc f8410e80 b5ffff60 17ffffb9 f9400020 360ff7a0 94107191 17ffffbb 128002b3
2023[ 62.271692 / 01-01 23:37:38.769][1]
2024[ 62.271692 / 01-01 23:37:38.769][1] LR: 0xffffffc0008b52e4:
2025[ 62.271701 / 01-01 23:37:38.769][0] 52e4 aa1603e0 aa1c03e4 2a1303e2 52800023 97fffbec 910003e0 9272c400 f94352d5
2026[ 62.271724 / 01-01 23:37:38.769][0] 5304 b9405400 b9008fa0 f9403fa0 8b0002bb 39403360 35000080 b94692c0 6b00027f
2027[ 62.271748 / 01-01 23:37:38.769][0] 5324 5400008b 910233a1 d28000a0 97e144ad b9400b60 51000800 7100041f 540000a9
2028[ 62.271771 / 01-01 23:37:38.769][0] 5344 d2800a00 9b00575a 39412340 34000040 97e228b9 910003e0 9119c294 9272c400
2029[ 62.271795 / 01-01 23:37:38.769][0] 5364 52800003 52800002 52800001 9103c294 b9405400 97e038ac b9400a80 7100001f
2030[ 62.271819 / 01-01 23:37:38.769][0] 5384 540002ed 910003e0 f0002123 9272c401 52800800 f9448863 b9405422 1ac00c40
2031[ 62.271842 / 01-01 23:37:38.769][0] 53a4 937d7c00 f8606860 9ac22400 36000180 b9405020 11000400 b9005020 f9401294
2032[ 62.271866 / 01-01 23:37:38.769][0] 53c4 b5000854 910003e0 9272c401 b9405020 51000400 b9005020 34000860 97e12e75
2033[ 62.271889 / 01-01 23:37:38.769][0] 53e4 cb180000 d2807d02 9ac20801 9b028020 b9000b20 d50342ff 2a1303e0 a94153f3
2034[ 62.271913 / 01-01 23:37:38.769][0] 5404 a9425bf5 a94363f7 a9446bf9 a94573fb a8c97bfd d65f03c0 a94002e2 2a1303e1
2035[ 62.271936 / 01-01 23:37:38.769][0] 5424 d63f0040 f8410ee0 b5ffff80 17ffff25 f9400020 360fe520 941071be 17ffff27
2036[ 62.271959 / 01-01 23:37:38.769][0] 5444 a9400086 aa0503e3 aa1703e2 2a1c03e1 a90613a5 d63f00c0 a94613a5 f8410c80
2037[ 62.271983 / 01-01 23:37:38.769][0] 5464 b5ffff00 17ffff49 f9400020 360fe9a0 941071b0 17ffff4b 2a1303e1 aa1603e0
2038[ 62.272006 / 01-01 23:37:38.769][0] 5484 52800022 97fffe25 53001c17 17ffff63 a9400086 aa0503e3 b94077a1 aa1b03e2
2039[ 62.272030 / 01-01 23:37:38.769][0] 54a4 a90613a5 d63f00c0 a94613a5 f8410c80 b5ffff00 17ffff84 f9400020 360ff100
2040[ 62.272053 / 01-01 23:37:38.769][0] 54c4 9410719c 17ffff86 a9400283 2a1703e2 2a1303e1 d63f0060 f8410e80 b5ffff60
2041[ 62.272077 / 01-01 23:37:38.769][1]
2042[ 62.272077 / 01-01 23:37:38.769][1] SP: 0xffffffc0f8a9fd90:
2043[ 62.272085 / 01-01 23:37:38.769][0] fd90 ffffffff 00ffffff 50195406 00000000 00000bb4 00000000 00000003 00000000
2044[ 62.272109 / 01-01 23:37:38.769][0] fdb0 f88973a0 ffffffc0 f8a9fd90 ffffffc0 7f9521ab 0000000e 00989680 00000000
2045[ 62.272134 / 01-01 23:37:38.769][0] fdd0 00000000 00000000 00000000 00000000 f8894200 ffffffc0 00000200 dead0000
2046[ 62.272158 / 01-01 23:37:38.769][0] fdf0 00001b4c 00000000 00000000 00000000 fe3236f0 ffffffc0 00000000 00000000
2047[ 62.272182 / 01-01 23:37:38.769][0] fe10 015ed760 ffffffc0 40e45418 ffffffc0 40e24018 ffffffc0 00000001 00000000
2048[ 62.272205 / 01-01 23:37:38.769][0] fe30 7f9542a0 0000000e fe322800 ffffffc0 40e45418 ffffffc0 40e45418 ffffffc0
2049[ 62.272229 / 01-01 23:37:38.769][0] fe50 7fa4f1b9 0000000e f8a9fe90 ffffffc0 008b53e4 ffffffc0 f8a9fe90 ffffffc0
2050[ 62.272252 / 01-01 23:37:38.769][0] fe70 008b53fc ffffffc0 60000145 00000000 40e45418 ffffffc0 7fa4f1b9 0000000e
2051[ 62.272276 / 01-01 23:37:38.769][0] fe90 f8a9ff20 ffffffc0 008b0b44 ffffffc0 015e8a08 ffffffc0 fe322800 ffffffc0
2052[ 62.272299 / 01-01 23:37:38.769][0] feb0 00000000 00000000 015e8a08 ffffffc0 7f954238 0000000e 40e47c00 ffffffc0
2053[ 62.272323 / 01-01 23:37:38.769][0] fed0 00000000 00000000 40e47c00 ffffffc0 00000000 00000000 80000000 00000040
2054[ 62.272346 / 01-01 23:37:38.769][0] fef0 f8a9ff20 ffffffc0 008b0b1c ffffffc0 015e8a08 00000000 00000000 00000000
2055[ 62.272370 / 01-01 23:37:38.769][0] ff10 00000000 00000000 014407f8 00000001 f8a9ff60 ffffffc0 008b0d5c ffffffc0
2056[ 62.272394 / 01-01 23:37:38.769][0] ff30 f8a9c000 ffffffc0 01441680 ffffffc0 fe322800 ffffffc0 014407f8 ffffffc0
2057[ 62.272418 / 01-01 23:37:38.769][0] ff50 f8a9ff70 ffffffc0 00cdc000 ffffffc0 f8a9ff70 ffffffc0 000dea14 ffffffc0
2058[ 62.272441 / 01-01 23:37:38.769][0] ff70 f8a9ffd0 ffffffc0 000907cc ffffffc0 00000001 00000000 00000e11 00000000
2059[ 62.272465 / 01-01 23:37:38.769][1]
2060[ 62.272473 / 01-01 23:37:38.769][1] CPU: 1 PID: 0 Comm: swapper/1 Not tainted 3.18.31-lge-h918-1.0 #1
2061[ 62.272479 / 01-01 23:37:38.769][1] Hardware name: Qualcomm Technologies, Inc. MSM 8996 v3.x + PMI8996 MTP (DT)
2062[ 62.272486 / 01-01 23:37:38.769][1] Call trace:
2063[ 62.272498 / 01-01 23:37:38.769][1] [<ffffffc0000896c0>] dump_backtrace+0x0/0xf0
2064[ 62.272506 / 01-01 23:37:38.769][1] [<ffffffc0000897c4>] show_stack+0x14/0x1c
2065[ 62.272517 / 01-01 23:37:38.769][1] [<ffffffc000cbe698>] dump_stack+0x84/0xac
2066[ 62.272525 / 01-01 23:37:38.769][1] [<ffffffc000090f88>] handle_IPI+0x270/0x348
2067[ 62.272533 / 01-01 23:37:38.769][1] [<ffffffc0000825c0>] gic_handle_irq+0xdc/0xe0
2068[ 62.272539 / 01-01 23:37:38.769][1] Exception stack(0xffffffc0f8a9fd40 to 0xffffffc0f8a9fe60)
2069[ 62.272547 / 01-01 23:37:38.769][1] fd40: 00000000 00000000 015ed760 ffffffc0 f8a9fe90 ffffffc0 008b53fc ffffffc0
2070[ 62.272555 / 01-01 23:37:38.769][1] fd60: 60000145 00000000 000c241c ffffffc0 0000007d 00000000 00000404 00000000
2071[ 62.272563 / 01-01 23:37:38.769][1] fd80: 000003e8 00000000 7fe5a200 002de544 ffffffff 00ffffff 50195406 00000000
2072[ 62.272570 / 01-01 23:37:38.769][1] fda0: 00000bb4 00000000 00000003 00000000 f88973a0 ffffffc0 f8a9fd90 ffffffc0
2073[ 62.272578 / 01-01 23:37:38.769][1] fdc0: 7f9521ab 0000000e 00989680 00000000 00000000 00000000 00000000 00000000
2074[ 62.272586 / 01-01 23:37:38.769][1] fde0: f8894200 ffffffc0 00000200 dead0000 00001b4c 00000000 00000000 00000000
2075[ 62.272593 / 01-01 23:37:38.769][1] fe00: fe3236f0 ffffffc0 00000000 00000000 015ed760 ffffffc0 40e45418 ffffffc0
2076[ 62.272600 / 01-01 23:37:38.769][1] fe20: 40e24018 ffffffc0 00000001 00000000 7f9542a0 0000000e fe322800 ffffffc0
2077[ 62.272607 / 01-01 23:37:38.769][1] fe40: 40e45418 ffffffc0 40e45418 ffffffc0 7fa4f1b9 0000000e f8a9fe90 ffffffc0
2078[ 62.272615 / 01-01 23:37:38.769][1] [<ffffffc000085da8>] el1_irq+0x68/0xd4
2079[ 62.272623 / 01-01 23:37:38.769][1] [<ffffffc0008b0b44>] cpuidle_enter_state+0xcc/0x210
2080[ 62.272630 / 01-01 23:37:38.769][1] [<ffffffc0008b0d5c>] cpuidle_enter+0x18/0x20
2081[ 62.272640 / 01-01 23:37:38.769][1] [<ffffffc0000dea14>] cpu_startup_entry+0x2b8/0x2fc
2082[ 62.272647 / 01-01 23:37:38.769][1] [<ffffffc0000907cc>] secondary_start_kernel+0x12c/0x138
2083[ 62.272654 / 01-01 23:37:38.769][0] CPU0: stopping
2084[ 62.272668 / 01-01 23:37:38.769][0]
2085[ 62.272688 / 01-01 23:37:38.769][0] CPU: 0 PID: 0 Comm: swapper/0 Not tainted 3.18.31-lge-h918-1.0 #1
2086[ 62.272699 / 01-01 23:37:38.769][0] Hardware name: Qualcomm Technologies, Inc. MSM 8996 v3.x + PMI8996 MTP (DT)
2087[ 62.272708 / 01-01 23:37:38.769][0] task: ffffffc00146e0b0 ti: ffffffc001460000 task.ti: ffffffc001460000
2088[ 62.272723 / 01-01 23:37:38.769][0] PC is at lpm_cpuidle_enter+0x4b8/0x5bc
2089[ 62.272731 / 01-01 23:37:38.769][0] LR is at lpm_cpuidle_enter+0x4a0/0x5bc
2090[ 62.272739 / 01-01 23:37:38.769][0] pc : [<ffffffc0008b53fc>] lr : [<ffffffc0008b53e4>] pstate: 60000145
2091[ 62.272745 / 01-01 23:37:38.769][0] sp : ffffffc001463e40
2092[ 62.272752 / 01-01 23:37:38.769][0] x29: ffffffc001463e40 x28: 0000000e7fa4f1b9
2093[ 62.272763 / 01-01 23:37:38.769][0] x27: ffffffc040e45418 x26: ffffffc040e45418
2094[ 62.272774 / 01-01 23:37:38.769][0] x25: ffffffc0fe313800 x24: 0000000e7efd9b96
2095[ 62.272783 / 01-01 23:37:38.769][0] x23: 0000000000000001 x22: ffffffc040e24018
2096[ 62.272793 / 01-01 23:37:38.769][0] x21: ffffffc040e45418 x20: ffffffc0015ed760
2097[ 62.272803 / 01-01 23:37:38.769][0] x19: 0000000000000000 x18: ffffffc0fe3146f0
2098[ 62.272812 / 01-01 23:37:38.769][0] x17: 0000000000000000 x16: 0000000000010a6d
2099[ 62.272822 / 01-01 23:37:38.769][0] x15: dead000000000200 x14: ffffffc0f4d3d800
2100[ 62.272831 / 01-01 23:37:38.769][0] x13: 0000000000000000 x12: 0000000000000000
2101[ 62.272840 / 01-01 23:37:38.769][0] x11: 0000000000989680 x10: 0000000e7e69fd44
2102[ 62.272849 / 01-01 23:37:38.769][0] x9 : ffffffc001463d40 x8 : ffffffc00146e650
2103[ 62.272859 / 01-01 23:37:38.769][0] x7 : 0000000000000003 x6 : 0000000000000bb4
2104[ 62.272868 / 01-01 23:37:38.769][0] x5 : 0000000050195406 x4 : 00ffffffffffffff
2105[ 62.272877 / 01-01 23:37:38.769][0] x3 : 002de5447fe5a200 x2 : 00000000000003e8
2106[ 62.272886 / 01-01 23:37:38.769][0] x1 : 0000000000002ad6 x0 : 0000000000000337
2107[ 62.272896 / 01-01 23:37:38.769][0]
2108[ 62.272896 / 01-01 23:37:38.769][0] PC: 0xffffffc0008b52fc:
2109[ 62.272905 / 01-01 23:37:38.769][0] 52fc 9272c400 f94352d5 b9405400 b9008fa0 f9403fa0 8b0002bb 39403360 35000080
2110[ 62.272930 / 01-01 23:37:38.769][0] 531c b94692c0 6b00027f 5400008b 910233a1 d28000a0 97e144ad b9400b60 51000800
2111[ 62.272954 / 01-01 23:37:38.769][0] 533c 7100041f 540000a9 d2800a00 9b00575a 39412340 34000040 97e228b9 910003e0
2112[ 62.272978 / 01-01 23:37:38.769][0] 535c 9119c294 9272c400 52800003 52800002 52800001 9103c294 b9405400 97e038ac
2113[ 62.273002 / 01-01 23:37:38.769][0] 537c b9400a80 7100001f 540002ed 910003e0 f0002123 9272c401 52800800 f9448863
2114[ 62.273026 / 01-01 23:37:38.769][0] 539c b9405422 1ac00c40 937d7c00 f8606860 9ac22400 36000180 b9405020 11000400
2115[ 62.273049 / 01-01 23:37:38.769][0] 53bc b9005020 f9401294 b5000854 910003e0 9272c401 b9405020 51000400 b9005020
2116[ 62.273072 / 01-01 23:37:38.769][0] 53dc 34000860 97e12e75 cb180000 d2807d02 9ac20801 9b028020 b9000b20 d50342ff
2117[ 62.273096 / 01-01 23:37:38.769][0] 53fc 2a1303e0 a94153f3 a9425bf5 a94363f7 a9446bf9 a94573fb a8c97bfd d65f03c0
2118[ 62.273121 / 01-01 23:37:38.769][0] 541c a94002e2 2a1303e1 d63f0040 f8410ee0 b5ffff80 17ffff25 f9400020 360fe520
2119[ 62.273144 / 01-01 23:37:38.769][0] 543c 941071be 17ffff27 a9400086 aa0503e3 aa1703e2 2a1c03e1 a90613a5 d63f00c0
2120[ 62.273167 / 01-01 23:37:38.769][0] 545c a94613a5 f8410c80 b5ffff00 17ffff49 f9400020 360fe9a0 941071b0 17ffff4b
2121[ 62.273191 / 01-01 23:37:38.769][0] 547c 2a1303e1 aa1603e0 52800022 97fffe25 53001c17 17ffff63 a9400086 aa0503e3
2122[ 62.273214 / 01-01 23:37:38.769][0] 549c b94077a1 aa1b03e2 a90613a5 d63f00c0 a94613a5 f8410c80 b5ffff00 17ffff84
2123[ 62.273238 / 01-01 23:37:38.769][0] 54bc f9400020 360ff100 9410719c 17ffff86 a9400283 2a1703e2 2a1303e1 d63f0060
2124[ 62.273261 / 01-01 23:37:38.769][0] 54dc f8410e80 b5ffff60 17ffffb9 f9400020 360ff7a0 94107191 17ffffbb 128002b3
2125[ 62.273285 / 01-01 23:37:38.769][0]
2126[ 62.273285 / 01-01 23:37:38.769][0] LR: 0xffffffc0008b52e4:
2127[ 62.273295 / 01-01 23:37:38.769][0] 52e4 aa1603e0 aa1c03e4 2a1303e2 52800023 97fffbec 910003e0 9272c400 f94352d5
2128[ 62.273318 / 01-01 23:37:38.769][0] 5304 b9405400 b9008fa0 f9403fa0 8b0002bb 39403360 35000080 b94692c0 6b00027f
2129[ 62.273342 / 01-01 23:37:38.769][0] 5324 5400008b 910233a1 d28000a0 97e144ad b9400b60 51000800 7100041f 540000a9
2130[ 62.273365 / 01-01 23:37:38.769][0] 5344 d2800a00 9b00575a 39412340 34000040 97e228b9 910003e0 9119c294 9272c400
2131[ 62.273389 / 01-01 23:37:38.769][0] 5364 52800003 52800002 52800001 9103c294 b9405400 97e038ac b9400a80 7100001f
2132[ 62.273413 / 01-01 23:37:38.769][0] 5384 540002ed 910003e0 f0002123 9272c401 52800800 f9448863 b9405422 1ac00c40
2133[ 62.273437 / 01-01 23:37:38.769][0] 53a4 937d7c00 f8606860 9ac22400 36000180 b9405020 11000400 b9005020 f9401294
2134[ 62.273461 / 01-01 23:37:38.769][0] 53c4 b5000854 910003e0 9272c401 b9405020 51000400 b9005020 34000860 97e12e75
2135[ 62.273485 / 01-01 23:37:38.769][0] 53e4 cb180000 d2807d02 9ac20801 9b028020 b9000b20 d50342ff 2a1303e0 a94153f3
2136[ 62.273508 / 01-01 23:37:38.769][0] 5404 a9425bf5 a94363f7 a9446bf9 a94573fb a8c97bfd d65f03c0 a94002e2 2a1303e1
2137[ 62.273532 / 01-01 23:37:38.769][0] 5424 d63f0040 f8410ee0 b5ffff80 17ffff25 f9400020 360fe520 941071be 17ffff27
2138[ 62.273556 / 01-01 23:37:38.769][0] 5444 a9400086 aa0503e3 aa1703e2 2a1c03e1 a90613a5 d63f00c0 a94613a5 f8410c80
2139[ 62.273579 / 01-01 23:37:38.769][0] 5464 b5ffff00 17ffff49 f9400020 360fe9a0 941071b0 17ffff4b 2a1303e1 aa1603e0
2140[ 62.273603 / 01-01 23:37:38.769][0] 5484 52800022 97fffe25 53001c17 17ffff63 a9400086 aa0503e3 b94077a1 aa1b03e2
2141[ 62.273626 / 01-01 23:37:38.769][0] 54a4 a90613a5 d63f00c0 a94613a5 f8410c80 b5ffff00 17ffff84 f9400020 360ff100
2142[ 62.273650 / 01-01 23:37:38.769][0] 54c4 9410719c 17ffff86 a9400283 2a1703e2 2a1303e1 d63f0060 f8410e80 b5ffff60
2143[ 62.273674 / 01-01 23:37:38.769][0]
2144[ 62.273674 / 01-01 23:37:38.769][0] SP: 0xffffffc001463d40:
2145[ 62.273683 / 01-01 23:37:38.769][0] 3d40 ffffffff 00ffffff 50195406 00000000 00000bb4 00000000 00000003 00000000
2146[ 62.273707 / 01-01 23:37:38.769][0] 3d60 0146e650 ffffffc0 01463d40 ffffffc0 7e69fd44 0000000e 00989680 00000000
2147[ 62.273731 / 01-01 23:37:38.769][0] 3d80 00000000 00000000 00000000 00000000 f4d3d800 ffffffc0 00000200 dead0000
2148[ 62.273755 / 01-01 23:37:38.769][0] 3da0 00010a6d 00000000 00000000 00000000 fe3146f0 ffffffc0 00000000 00000000
2149[ 62.273779 / 01-01 23:37:38.769][0] 3dc0 015ed760 ffffffc0 40e45418 ffffffc0 40e24018 ffffffc0 00000001 00000000
2150[ 62.273803 / 01-01 23:37:38.769][0] 3de0 7efd9b96 0000000e fe313800 ffffffc0 40e45418 ffffffc0 40e45418 ffffffc0
2151[ 62.273827 / 01-01 23:37:38.769][0] 3e00 7fa4f1b9 0000000e 01463e40 ffffffc0 008b53e4 ffffffc0 01463e40 ffffffc0
2152[ 62.273850 / 01-01 23:37:38.769][0] 3e20 008b53fc ffffffc0 60000145 00000000 40e45418 ffffffc0 7fa4f1b9 0000000e
2153[ 62.273874 / 01-01 23:37:38.769][0] 3e40 01463ed0 ffffffc0 008b0b44 ffffffc0 015e8a08 ffffffc0 fe313800 ffffffc0
2154[ 62.273898 / 01-01 23:37:38.769][0] 3e60 00000000 00000000 015e8a08 ffffffc0 7efd9b2e 0000000e 40e47c00 ffffffc0
2155[ 62.273921 / 01-01 23:37:38.769][0] 3e80 00000000 00000000 40e47c00 ffffffc0 00000000 00000000 80000000 00000040
2156[ 62.273945 / 01-01 23:37:38.769][0] 3ea0 01463ed0 ffffffc0 008b0b1c ffffffc0 015e8a08 00000000 00000000 00000000
2157[ 62.273969 / 01-01 23:37:38.769][0] 3ec0 00000000 00000000 014407f8 00000000 01463f10 ffffffc0 008b0d5c ffffffc0
2158[ 62.273993 / 01-01 23:37:38.769][0] 3ee0 01460000 ffffffc0 01441680 ffffffc0 fe313800 ffffffc0 014407f8 ffffffc0
2159[ 62.274017 / 01-01 23:37:38.769][0] 3f00 01463f20 ffffffc0 00cdc000 ffffffc0 01463f20 ffffffc0 000dea14 ffffffc0
2160[ 62.274040 / 01-01 23:37:38.769][0] 3f20 01463f80 ffffffc0 00cb828c ffffffc0 00000002 00000000 015fa000 ffffffc0
2161[ 62.274064 / 01-01 23:37:38.769][0]
2162[ 62.274072 / 01-01 23:37:38.769][0] CPU: 0 PID: 0 Comm: swapper/0 Not tainted 3.18.31-lge-h918-1.0 #1
2163[ 62.274079 / 01-01 23:37:38.769][0] Hardware name: Qualcomm Technologies, Inc. MSM 8996 v3.x + PMI8996 MTP (DT)
2164[ 62.274086 / 01-01 23:37:38.769][0] Call trace:
2165[ 62.274099 / 01-01 23:37:38.769][0] [<ffffffc0000896c0>] dump_backtrace+0x0/0xf0
2166[ 62.274107 / 01-01 23:37:38.769][0] [<ffffffc0000897c4>] show_stack+0x14/0x1c
2167[ 62.274119 / 01-01 23:37:38.769][0] [<ffffffc000cbe698>] dump_stack+0x84/0xac
2168[ 62.274128 / 01-01 23:37:38.769][0] [<ffffffc000090f88>] handle_IPI+0x270/0x348
2169[ 62.274136 / 01-01 23:37:38.769][0] [<ffffffc0000825c0>] gic_handle_irq+0xdc/0xe0
2170[ 62.274144 / 01-01 23:37:38.769][0] Exception stack(0xffffffc001463cf0 to 0xffffffc001463e10)
2171[ 62.274152 / 01-01 23:37:38.769][0] 3ce0: 00000000 00000000 015ed760 ffffffc0
2172[ 62.274161 / 01-01 23:37:38.769][0] 3d00: 01463e40 ffffffc0 008b53fc ffffffc0 60000145 00000000 000c241c ffffffc0
2173[ 62.274170 / 01-01 23:37:38.769][0] 3d20: 00000337 00000000 00002ad6 00000000 000003e8 00000000 7fe5a200 002de544
2174[ 62.274178 / 01-01 23:37:38.769][0] 3d40: ffffffff 00ffffff 50195406 00000000 00000bb4 00000000 00000003 00000000
2175[ 62.274187 / 01-01 23:37:38.769][0] 3d60: 0146e650 ffffffc0 01463d40 ffffffc0 7e69fd44 0000000e 00989680 00000000
2176[ 62.274195 / 01-01 23:37:38.769][0] 3d80: 00000000 00000000 00000000 00000000 f4d3d800 ffffffc0 00000200 dead0000
2177[ 62.274203 / 01-01 23:37:38.769][0] 3da0: 00010a6d 00000000 00000000 00000000 fe3146f0 ffffffc0 00000000 00000000
2178[ 62.274211 / 01-01 23:37:38.769][0] 3dc0: 015ed760 ffffffc0 40e45418 ffffffc0 40e24018 ffffffc0 00000001 00000000
2179[ 62.274219 / 01-01 23:37:38.769][0] 3de0: 7efd9b96 0000000e fe313800 ffffffc0 40e45418 ffffffc0 40e45418 ffffffc0
2180[ 62.274226 / 01-01 23:37:38.769][0] 3e00: 7fa4f1b9 0000000e 01463e40 ffffffc0
2181[ 62.274234 / 01-01 23:37:38.769][0] [<ffffffc000085da8>] el1_irq+0x68/0xd4
2182[ 62.274243 / 01-01 23:37:38.769][0] [<ffffffc0008b0b44>] cpuidle_enter_state+0xcc/0x210
2183[ 62.274251 / 01-01 23:37:38.769][0] [<ffffffc0008b0d5c>] cpuidle_enter+0x18/0x20
2184[ 62.274261 / 01-01 23:37:38.769][0] [<ffffffc0000dea14>] cpu_startup_entry+0x2b8/0x2fc
2185[ 62.274270 / 01-01 23:37:38.769][0] [<ffffffc000cb828c>] rest_init+0x88/0x94
2186[ 62.274280 / 01-01 23:37:38.769][0] [<ffffffc0013c9974>] start_kernel+0x3c0/0x3d4
2187[ 62.274287 / 01-01 23:37:38.769][3] CPU3: stopping
2188[ 62.274295 / 01-01 23:37:38.769][3]
2189[ 62.274304 / 01-01 23:37:38.769][3] CPU: 3 PID: 0 Comm: swapper/3 Not tainted 3.18.31-lge-h918-1.0 #1
2190[ 62.274311 / 01-01 23:37:38.769][3] Hardware name: Qualcomm Technologies, Inc. MSM 8996 v3.x + PMI8996 MTP (DT)
2191[ 62.274317 / 01-01 23:37:38.769][3] task: ffffffc0f8aa0b00 ti: ffffffc0f8ab0000 task.ti: ffffffc0f8ab0000
2192[ 62.274330 / 01-01 23:37:38.769][3] PC is at lpm_cpuidle_enter+0x4b8/0x5bc
2193[ 62.274336 / 01-01 23:37:38.769][3] LR is at lpm_cpuidle_enter+0x4a0/0x5bc
2194[ 62.274341 / 01-01 23:37:38.769][3] pc : [<ffffffc0008b53fc>] lr : [<ffffffc0008b53e4>] pstate: 60000145
2195[ 62.274346 / 01-01 23:37:38.769][3] sp : ffffffc0f8ab3e90
2196[ 62.274351 / 01-01 23:37:38.769][0] x29: ffffffc0f8ab3e90 x28: 0000000e7fa4f562
2197[ 62.274359 / 01-01 23:37:38.769][0] x27: ffffffc040e45818 x26: ffffffc040e45818
2198[ 62.274367 / 01-01 23:37:38.769][0] x25: ffffffc0fe340800 x24: 0000000e7eff2b92
2199[ 62.274374 / 01-01 23:37:38.769][0] x23: 0000000000000001 x22: ffffffc040e24818
2200[ 62.274381 / 01-01 23:37:38.769][0] x21: ffffffc040e45818 x20: ffffffc0015ed760
2201[ 62.274388 / 01-01 23:37:38.769][0] x19: 0000000000000000 x18: ffffffc0fe3416f0
2202[ 62.274395 / 01-01 23:37:38.769][0] x17: 0000000000000003 x16: 0000000000004cb4
2203[ 62.274402 / 01-01 23:37:38.769][0] x15: dead000000000200 x14: ffffffc0f5025800
2204[ 62.274410 / 01-01 23:37:38.769][0] x13: 0000000000000000 x12: 0000000000000000
2205[ 62.274417 / 01-01 23:37:38.769][0] x11: 0000000000989680 x10: 0000000e7efdb15b
2206[ 62.274424 / 01-01 23:37:38.769][0] x9 : ffffffc0f8ab3d90 x8 : ffffffc0f8aa10a0
2207[ 62.274431 / 01-01 23:37:38.769][0] x7 : 0000000000000003 x6 : 0000000000000bb4
2208[ 62.274437 / 01-01 23:37:38.769][0] x5 : 0000000050195406 x4 : 00ffffffffffffff
2209[ 62.274445 / 01-01 23:37:38.769][0] x3 : 002de5447fe5a200 x2 : 00000000000003e8
2210[ 62.274452 / 01-01 23:37:38.769][0] x1 : 0000000000002a72 x0 : 000000000000002a
2211[ 62.274459 / 01-01 23:37:38.769][3]
2212[ 62.274459 / 01-01 23:37:38.769][3] PC: 0xffffffc0008b52fc:
2213[ 62.274466 / 01-01 23:37:38.769][0] 52fc 9272c400 f94352d5 b9405400 b9008fa0 f9403fa0 8b0002bb 39403360 35000080
2214[ 62.274486 / 01-01 23:37:38.769][0] 531c b94692c0 6b00027f 5400008b 910233a1 d28000a0 97e144ad b9400b60 51000800
2215[ 62.274506 / 01-01 23:37:38.769][0] 533c 7100041f 540000a9 d2800a00 9b00575a 39412340 34000040 97e228b9 910003e0
2216[ 62.274525 / 01-01 23:37:38.769][0] 535c 9119c294 9272c400 52800003 52800002 52800001 9103c294 b9405400 97e038ac
2217[ 62.274544 / 01-01 23:37:38.769][0] 537c b9400a80 7100001f 540002ed 910003e0 f0002123 9272c401 52800800 f9448863
2218[ 62.274563 / 01-01 23:37:38.769][0] 539c b9405422 1ac00c40 937d7c00 f8606860 9ac22400 36000180 b9405020 11000400
2219[ 62.274582 / 01-01 23:37:38.769][0] 53bc b9005020 f9401294 b5000854 910003e0 9272c401 b9405020 51000400 b9005020
2220[ 62.274601 / 01-01 23:37:38.769][0] 53dc 34000860 97e12e75 cb180000 d2807d02 9ac20801 9b028020 b9000b20 d50342ff
2221[ 62.274620 / 01-01 23:37:38.769][0] 53fc 2a1303e0 a94153f3 a9425bf5 a94363f7 a9446bf9 a94573fb a8c97bfd d65f03c0
2222[ 62.274639 / 01-01 23:37:38.769][0] 541c a94002e2 2a1303e1 d63f0040 f8410ee0 b5ffff80 17ffff25 f9400020 360fe520
2223[ 62.274657 / 01-01 23:37:38.769][0] 543c 941071be 17ffff27 a9400086 aa0503e3 aa1703e2 2a1c03e1 a90613a5 d63f00c0
2224[ 62.274676 / 01-01 23:37:38.769][0] 545c a94613a5 f8410c80 b5ffff00 17ffff49 f9400020 360fe9a0 941071b0 17ffff4b
2225[ 62.274695 / 01-01 23:37:38.769][0] 547c 2a1303e1 aa1603e0 52800022 97fffe25 53001c17 17ffff63 a9400086 aa0503e3
2226[ 62.274714 / 01-01 23:37:38.769][0] 549c b94077a1 aa1b03e2 a90613a5 d63f00c0 a94613a5 f8410c80 b5ffff00 17ffff84
2227[ 62.274732 / 01-01 23:37:38.769][0] 54bc f9400020 360ff100 9410719c 17ffff86 a9400283 2a1703e2 2a1303e1 d63f0060
2228[ 62.274751 / 01-01 23:37:38.769][0] 54dc f8410e80 b5ffff60 17ffffb9 f9400020 360ff7a0 94107191 17ffffbb 128002b3
2229[ 62.274770 / 01-01 23:37:38.769][3]
2230[ 62.274770 / 01-01 23:37:38.769][3] LR: 0xffffffc0008b52e4:
2231[ 62.274777 / 01-01 23:37:38.769][0] 52e4 aa1603e0 aa1c03e4 2a1303e2 52800023 97fffbec 910003e0 9272c400 f94352d5
2232[ 62.274796 / 01-01 23:37:38.769][0] 5304 b9405400 b9008fa0 f9403fa0 8b0002bb 39403360 35000080 b94692c0 6b00027f
2233[ 62.274815 / 01-01 23:37:38.769][0] 5324 5400008b 910233a1 d28000a0 97e144ad b9400b60 51000800 7100041f 540000a9
2234[ 62.274833 / 01-01 23:37:38.769][0] 5344 d2800a00 9b00575a 39412340 34000040 97e228b9 910003e0 9119c294 9272c400
2235[ 62.274852 / 01-01 23:37:38.769][0] 5364 52800003 52800002 52800001 9103c294 b9405400 97e038ac b9400a80 7100001f
2236[ 62.274872 / 01-01 23:37:38.769][0] 5384 540002ed 910003e0 f0002123 9272c401 52800800 f9448863 b9405422 1ac00c40
2237[ 62.274890 / 01-01 23:37:38.769][0] 53a4 937d7c00 f8606860 9ac22400 36000180 b9405020 11000400 b9005020 f9401294
2238[ 62.274909 / 01-01 23:37:38.769][0] 53c4 b5000854 910003e0 9272c401 b9405020 51000400 b9005020 34000860 97e12e75
2239[ 62.274928 / 01-01 23:37:38.769][0] 53e4 cb180000 d2807d02 9ac20801 9b028020 b9000b20 d50342ff 2a1303e0 a94153f3
2240[ 62.274947 / 01-01 23:37:38.769][0] 5404 a9425bf5 a94363f7 a9446bf9 a94573fb a8c97bfd d65f03c0 a94002e2 2a1303e1
2241[ 62.274966 / 01-01 23:37:38.769][0] 5424 d63f0040 f8410ee0 b5ffff80 17ffff25 f9400020 360fe520 941071be 17ffff27
2242[ 62.274985 / 01-01 23:37:38.769][0] 5444 a9400086 aa0503e3 aa1703e2 2a1c03e1 a90613a5 d63f00c0 a94613a5 f8410c80
2243[ 62.275003 / 01-01 23:37:38.769][0] 5464 b5ffff00 17ffff49 f9400020 360fe9a0 941071b0 17ffff4b 2a1303e1 aa1603e0
2244[ 62.275022 / 01-01 23:37:38.769][0] 5484 52800022 97fffe25 53001c17 17ffff63 a9400086 aa0503e3 b94077a1 aa1b03e2
2245[ 62.275041 / 01-01 23:37:38.769][0] 54a4 a90613a5 d63f00c0 a94613a5 f8410c80 b5ffff00 17ffff84 f9400020 360ff100
2246[ 62.275059 / 01-01 23:37:38.769][0] 54c4 9410719c 17ffff86 a9400283 2a1703e2 2a1303e1 d63f0060 f8410e80 b5ffff60
2247[ 62.275078 / 01-01 23:37:38.769][3]
2248[ 62.275078 / 01-01 23:37:38.769][3] SP: 0xffffffc0f8ab3d90:
2249[ 62.275085 / 01-01 23:37:38.769][0] 3d90 ffffffff 00ffffff 50195406 00000000 00000bb4 00000000 00000003 00000000
2250[ 62.275104 / 01-01 23:37:38.769][0] 3db0 f8aa10a0 ffffffc0 f8ab3d90 ffffffc0 7efdb15b 0000000e 00989680 00000000
2251[ 62.275123 / 01-01 23:37:38.769][0] 3dd0 00000000 00000000 00000000 00000000 f5025800 ffffffc0 00000200 dead0000
2252[ 62.275142 / 01-01 23:37:38.769][0] 3df0 00004cb4 00000000 00000003 00000000 fe3416f0 ffffffc0 00000000 00000000
2253[ 62.275161 / 01-01 23:37:38.769][0] 3e10 015ed760 ffffffc0 40e45818 ffffffc0 40e24818 ffffffc0 00000001 00000000
2254[ 62.275180 / 01-01 23:37:38.769][0] 3e30 7eff2b92 0000000e fe340800 ffffffc0 40e45818 ffffffc0 40e45818 ffffffc0
2255[ 62.275199 / 01-01 23:37:38.769][0] 3e50 7fa4f562 0000000e f8ab3e90 ffffffc0 008b53e4 ffffffc0 f8ab3e90 ffffffc0
2256[ 62.275218 / 01-01 23:37:38.769][0] 3e70 008b53fc ffffffc0 60000145 00000000 40e45818 ffffffc0 7fa4f562 0000000e
2257[ 62.275236 / 01-01 23:37:38.769][0] 3e90 f8ab3f20 ffffffc0 008b0b44 ffffffc0 015e8a08 ffffffc0 fe340800 ffffffc0
2258[ 62.275255 / 01-01 23:37:38.769][0] 3eb0 00000000 00000000 015e8a08 ffffffc0 7eff2a5a 0000000e 40e47800 ffffffc0
2259[ 62.275274 / 01-01 23:37:38.769][0] 3ed0 00000000 00000000 40e47800 ffffffc0 00000000 00000000 80000000 00000040
2260[ 62.275292 / 01-01 23:37:38.769][0] 3ef0 f8ab3f20 ffffffc0 008b0b1c ffffffc0 015e8a08 00000000 00000000 00000000
2261[ 62.275312 / 01-01 23:37:38.769][0] 3f10 00000000 00000000 014407f8 00000003 f8ab3f60 ffffffc0 008b0d5c ffffffc0
2262[ 62.275331 / 01-01 23:37:38.769][0] 3f30 f8ab0000 ffffffc0 01441680 ffffffc0 fe340800 ffffffc0 014407f8 ffffffc0
2263[ 62.275350 / 01-01 23:37:38.769][0] 3f50 f8ab3f70 ffffffc0 00cdc000 ffffffc0 f8ab3f70 ffffffc0 000dea14 ffffffc0
2264[ 62.275369 / 01-01 23:37:38.769][0] 3f70 f8ab3fd0 ffffffc0 000907cc ffffffc0 00000003 00000000 00000e11 00000000
2265[ 62.275387 / 01-01 23:37:38.769][3]
2266[ 62.275394 / 01-01 23:37:38.769][3] CPU: 3 PID: 0 Comm: swapper/3 Not tainted 3.18.31-lge-h918-1.0 #1
2267[ 62.275399 / 01-01 23:37:38.769][3] Hardware name: Qualcomm Technologies, Inc. MSM 8996 v3.x + PMI8996 MTP (DT)
2268[ 62.275404 / 01-01 23:37:38.769][3] Call trace:
2269[ 62.275414 / 01-01 23:37:38.769][3] [<ffffffc0000896c0>] dump_backtrace+0x0/0xf0
2270[ 62.275420 / 01-01 23:37:38.769][3] [<ffffffc0000897c4>] show_stack+0x14/0x1c
2271[ 62.275429 / 01-01 23:37:38.769][3] [<ffffffc000cbe698>] dump_stack+0x84/0xac
2272[ 62.275436 / 01-01 23:37:38.769][3] [<ffffffc000090f88>] handle_IPI+0x270/0x348
2273[ 62.275442 / 01-01 23:37:38.769][3] [<ffffffc0000825c0>] gic_handle_irq+0xdc/0xe0
2274[ 62.275447 / 01-01 23:37:38.769][3] Exception stack(0xffffffc0f8ab3d40 to 0xffffffc0f8ab3e60)
2275[ 62.275453 / 01-01 23:37:38.769][3] 3d40: 00000000 00000000 015ed760 ffffffc0 f8ab3e90 ffffffc0 008b53fc ffffffc0
2276[ 62.275459 / 01-01 23:37:38.769][3] 3d60: 60000145 00000000 000c241c ffffffc0 0000002a 00000000 00002a72 00000000
2277[ 62.275465 / 01-01 23:37:38.769][3] 3d80: 000003e8 00000000 7fe5a200 002de544 ffffffff 00ffffff 50195406 00000000
2278[ 62.275471 / 01-01 23:37:38.769][3] 3da0: 00000bb4 00000000 00000003 00000000 f8aa10a0 ffffffc0 f8ab3d90 ffffffc0
2279[ 62.275477 / 01-01 23:37:38.769][3] 3dc0: 7efdb15b 0000000e 00989680 00000000 00000000 00000000 00000000 00000000
2280[ 62.275482 / 01-01 23:37:38.769][3] 3de0: f5025800 ffffffc0 00000200 dead0000 00004cb4 00000000 00000003 00000000
2281[ 62.275488 / 01-01 23:37:38.769][3] 3e00: fe3416f0 ffffffc0 00000000 00000000 015ed760 ffffffc0 40e45818 ffffffc0
2282[ 62.275494 / 01-01 23:37:38.769][3] 3e20: 40e24818 ffffffc0 00000001 00000000 7eff2b92 0000000e fe340800 ffffffc0
2283[ 62.275499 / 01-01 23:37:38.769][3] 3e40: 40e45818 ffffffc0 40e45818 ffffffc0 7fa4f562 0000000e f8ab3e90 ffffffc0
2284[ 62.275505 / 01-01 23:37:38.769][3] [<ffffffc000085da8>] el1_irq+0x68/0xd4
2285[ 62.275511 / 01-01 23:37:38.769][3] [<ffffffc0008b0b44>] cpuidle_enter_state+0xcc/0x210
2286[ 62.275517 / 01-01 23:37:38.769][3] [<ffffffc0008b0d5c>] cpuidle_enter+0x18/0x20
2287[ 62.275524 / 01-01 23:37:38.769][3] [<ffffffc0000dea14>] cpu_startup_entry+0x2b8/0x2fc
2288[ 62.275530 / 01-01 23:37:38.769][3] [<ffffffc0000907cc>] secondary_start_kernel+0x12c/0x138
2289[ 63.675749 / 01-01 23:37:38.769][2] ipa ipa2_active_clients_panic_notifier:285
2290[ 63.675749 / 01-01 23:37:38.769][2] ---- Active Clients Table ----
2291[ 63.675749 / 01-01 23:37:38.769][2]
2292[ 63.675749 / 01-01 23:37:38.769][2] Total active clients count: 0
2293[ 63.675769 / 01-01 23:37:38.769][2] ipa ipa2_uc_state_check:301 uC is not loaded
2294[ 63.696938 / 01-01 23:37:38.769][0] Rebooting in 5 seconds..
2295[ 68.697200 / 01-01 23:37:38.769][2] Going down for restart now (pid: 1, comm: swapper/0)
2296[ 68.697813 / 01-01 23:37:38.769][2] qcom,qpnp-power-on qpnp-power-on-2: power off type = 0x01, WARM_RESET
2297[ 68.697821 / 01-01 23:37:38.769][2] qcom,qpnp-power-on qpnp-power-on-11: PMIC@SID2: configuring PON for reset
2298[ 68.698410 / 01-01 23:37:38.769][2] qcom,qpnp-power-on qpnp-power-on-11: power off type = 0x01, WARM_RESET
2299[ 68.698440 / 01-01 23:37:38.769][0] Causing a watchdog bite!