· 6 years ago · Apr 24, 2019, 03:14 AM
1Welcome to Arduino UART Debugger 3000!
2 ⸮0
3⸮@⸮⸮⸮ ⸮ < ⸮ ⸮⸮ > ⸮⸮⸮⸮ ⸮⸮ ⸮ ⸮ ⸮ ⸮⸮⸮⸮⸮ ⸮ ⸮ ⸮ ⸮⸮ ⸮⸮⸮⸮ [45410] fastboot: getvar:slot-count
4[45410] battery voltage: 4313000uV
5[45410] battery voltage: 4313000uV
6[45440] fastboot: download:0130c000
7[45770] fastboot: boot
8[45770] boot_verifier: Device is in ORANGE boot state.
9[45770] Device is unlocked! Skipping set device status...
10[45780] Your device has been unlocked and can't be trusted.
11[45780] LK SEC APP Handle: 0x1
12[45800] <8>keymaster: "\"cmd_id=KEYMASTER_SET_ROT\""
13[45800] <8>keymaster: "\"cmd_id=KEYMASTER_SET_ROT done with ret: 0 time taken: 1\""
14[45810] decompressing kernel image: start
15[46290] decompressing kernel image: done
16[46290] Add DTB entry 422/00000080/0x00000000/10001/20009/10013/0/0/9299a135/5fcf8
17[46310] Add DTB entry 422/00000080/0x00000000/10001/3/4/45/1/9299a135/5fcf8
18[46320] Best match DTB tags 422/00000080/0x00000000/10001/20009/10013/0/0/9299a135/5fcf8
19[46320] Using pmic info 0x20009/0x10013/0x0/0x0 for device 0x20009/0x455013/0x0/0x0
20[46370] [DISP] Trigger updating for MIPI_CMD_PANEL.
21[46400] pm8x41_get_is_cold_boot: cold boot
22[46400] check_reboot_mode: restart_reason: 0x00000000
23[46400] target_pause_for_battery_charge : pon_reason is 177 cold_boot:1
24[46410] target_pause_for_battery_charge : GCC_RESET_STATUS(0x66BF028): 0x2
25
26[46430] display kernel cmdline: mdss_mdp.panel=1:dsi:0:qcom,mdss_dsi_samsung_s6e3ha3_wqhd_cmd:1:qcom,mdss_dsi_samsung_s6e3ha3_wqhd_cmd:cfg:split_dsi
27[46440] pm8x41_get_is_cold_boot: cold boot
28[46440] ddr_vendor 40] chipset_ver is 1005F0E1
29
30[46460] chipset_ver is 1005F0E1
31
32[46460] HW Security has been enabled !
33
34[46460] Device CID is not super CID
35
36[46470] Device CID is not super CID
37
38[46470] target_get_fingerprint_id: status:1
39[46470] [HTC] lba of setting:0
40[46490] [HTC] 0 is read from setting, which is invalid
41[46490] get_writable_core_dump_size: check_rdump_ext4_file_map() fails: -1
42[46500] check_reboot_mode: restart_reason: 0x00000000
43[46500] get_reboot_reason_type: poff_reason1: 0x2
44[46520] pon reason: 0xa1, 0xb1
45[46520] pm8x41_get_is_cold_boot: cold boot
46[46520] is_usb_pon_reason: pon reason: 0xa1, 0xb1
47[46530] pm8x41_get_is_cold_boot: cold boot
48[46530] check_reboot_mode: restart_reason: 0x00000000
49[46530] google_boot_logger: reason type: 0x3, reset reason 0x0
50[46550] check_reboot_mode: restart_reason: 0x00000000
51[46550] get_reboot_reason_type: poff_reason1: 0x2
52[46560] pon reason: 0xa1, 0xb1
53[46560] pm8x41_get_is_cold_boot: cold boot
54[46560] is_usb_pon_reason: pon reason: 0xa1, 0xb1
55[46580] pm8x41_get_is_cold_boot: cold boot
56[46580] check_reboot_mode: restart_reason: 0x00000000
57[46590] google_boot_logger: reason type: 0x3, reset reason 0x0
58[46590] Get partition(system_b) lun and count
59[46610] Found partitoin name (system_b)
60[46610] Add kernel cmdline parameter( ro root=/dev/dm-0 dm="system none ro,0 1 android-verity /dev/sda34") to enable dm-verity
61[46620] Add kernel cmdline parameter( rootwait skip_initramfs init=/init) to boot without ramdisk
62[46640] get_wifi_country_code: mfg_wifi 10
63
64[46640] wifi_country US
65
66[46640] get_wifi_country_code: mfg_wifi 10
67
68[46650] wifi_country US
69
70[46650] cmdline: earlycon=msm_hsl_uart,0x075B0000 console=ttyHSL0,115200,n8 androidboot.console=ttyHSL0 androidboot.hardware=marlin user_debug=31 ehci-hcd.park=3 lpm_levels.sleep_disabled=1 cma=32M@0-0xffffffff loop.max_part=7 selinux=0 audit=0 androidboot.bootde[46680] Updating device tree: start
71[46710] Appending /chosen/misc node data into FDT
72
73[46710] firmware_main_version: 16-byte added
74
75[46730] enable_log: 64-byte added
76
77[46730] (setting_get_anti_rollback_1_lsb):(00000000)
78
79[46730] QFPROM_CORR_ANTI_ROLLBACK_1_LSB: 9-byte added
80
81[46740] (setting_get_anti_rollback_1_msb):(00000000)
82
83[46740] QFPROM_CORR_ANTI_ROLLBACK_1_MSB: 9-byte added
84
85[46760] (setting_get_anti_rollback_2_lsb):(00000000)
86
87[46760] QFPROM_CORR_ANTI_ROLLBACK_2_LSB: 9-byte added
88
89[46770] (setting_get_anti_rollback_2_msb):(00000000)
90
91[46770] QFPROM_CORR_ANTI_ROLLBACK_2_MSB: 9-byte added
92
93[46790] [INFO] setting_get_msm_serial: chip serial number msm_serial: a8f7a84f
94[46790] QFPROM_CORR_MSM_SERIAL_NUM: 21-byte added
95
96[46800] Appending /chosen/mfg node data into FDT
97
98[46800] skuid.bom_id: 1-byte added
99
100[46820] skuid.dw0: 4-byte added
101
102[46820] skuid.rf_id: 32-byte added
103
104[46820] skuid.engineer_id: 4-byte added
105
106[46830] skuid.pcb_id: 1-byte added
107
108[46830] Appending /chosen/board_info node data into FDT
109
110[46850] pid: 4-byte added
111
112[46850] Appending calibration data info FDT
113
114[46860] bt_flash: 6-byte added
115
116[46860] ps_flash: 8-byte added
117
118[46860] ws_flash: 4-byte added
119
120[46880] als_flash: 4-byte added
121
122[46880] gs_flash: 4-byte added
123
124[46880] gyro_flash: 768-byte added
125
126[46880] wifi_eeprom: 2048-byte added
127
128[46890] cam_awb: 16384-byte added
129
130[46890] ps_adi_flash: 11-byte added
131
132[46890] bs_flash: 5-byte added
133
134[46910] disp_flash: 64-byte added
135
136[46910] Appending /chosen/radio node data into FDT
137
138[46920] secure_flag: 4-byte added
139
140[46920] htc_smem_pid: 4-byte added
141
142[46920] htc_smem_cid: 16-byte added
143
144[46940] htc_smem_imei: 16-byte added
145
146[46940] htc_smem_imei2: 16-byte added
147
148[46940] htc_smem_meid: 16-byte added
149
150[46950] sku_id: 48-byte added
151
152[46950] fdt_get_wlan_ramdump_size: wlan ramdump len: 0x200000
153[46950] target_update_battery_data PLATFORM = 8996
154
155[46970] target_update_battery_data offset:-1
156
157[46970] target_update_battery_data fdt_setprop_inplace fail in magic_num,ret:-4
158
159[46980] WARN: Failed to update battery data
160
161[46980] target_update_display_data done
162
163[47000] Updating device tree: done
164[47000] platform_vib_delay: delay for 200 ms to ensure vibrator can be disabled
165
166[47130] platform_vib_delay: delay for 200 ms end
167
168[47130] set_imem_lock_state: state = 0
169[47150] restart_reason set to 0x776655aa
170[47150] UFS set Write Protection
171[47150] Power on Write Protect request failed. Retrying again.
172[47160] Power on Write Protect status: 1
173[47160] Turn off MIPI_CMD_PANEL.
174[47160] Continuous splash enabled, keeping panel alive.
175[47180] target_uninit(): abnrst_subsys_skip: 0
176[47180] <8>keymaster: "\"cmd_id=KEYMASTER_MILESTONE_CALL\""
177[47190] <8>keymaster: "\"cmd_id=KEYMASTER_MILESTONE_CALL done with ret: 0 time taken: 1\""
178[47210] Return value from recv_data: 14
179[47220] RPM GLINK UnInit
180[47220] Qseecom De-Init Done in Appsbl
181[47220] booting linux @ 0x80080000, ramdisk @ 0x82200000 (1009903), tags/device tree @ 0x82000000
182[47240] pm8x41_read_time(): RTC_WR_EN_CTL1: 0x80
183
184[47240] pm8x41_read_bytes: value: 0xda
185
186[47240] pm8x41_read_bytes: value: 0x53
187
188[47240] pm8x41_read_bytes: value: 0x0
189
190[47240] pm8x41_read_bytes: value: 0x0
191
192[47240] val0:218 val1:83 val2:0 val3:0
193
194[47240] pm8x41_read_time: secs = 21466, h::m:s == 5::57::46, d/m/y = 1/0/70
195
196[47240] record_rtc_end_time: secs = 21466, h::m:s == 5::57::46, d/m/y = 1/0/70
197
198[47240] ### LK End time: 1970-01-01 05:57:46
199
200[47240] ### LK delta time: 78 secs
201
202[47240] Jumping to kernel via monitor
203[ 0.000000] c0 0 Initializing cgroup subsys cpuset
204[ 0.000000] c0 0 Initializing cgroup subsys cpu
205[ 0.000000] c0 0 Initializing cgroup subsys cpuacct
206[ 0.000000] c0 0 Initializing cgroup subsys schedtune
207[ 0.000000] c0 0 Linux version 3.18.70-Lineage-g54b61efe09a-dirty (osum4est@AwesomeArchPC) (gcc version 4.9.x 20150123 (prerelease) (GCC) ) #42 SMP PREEMPT Wed Apr 24 03:05:20 UTC 2019
208[ 0.000000] c0 0 Boot CPU: AArch64 Processor [512f2011] v1.1 + PMI8996 Marlin A
209[ 0.000000] c0 0 Early serial console at I/O port 0x0 (options '')
210[ 0.000000] c0 0 bootconsole [uart0] enabled
211[ 0.000000] c0 0 efi: Getting EFI parameters from FDT:
212[ 0.000000] c0 0 efi: UEFI not found.
213[ 0.000000] c0 0 Reserved memory: reserved region for node 'removed_regions@85800000': base 0x0000000000000000, size 48 MiB
214[ 0.000000] c0 0 Reserved memory: reserved region for n'peripheral_region@8ea00000': base 0x0000000000000000, size 45 MiB
215[ 0.000000] c0 0 Reserved memory: reserved region for ne 'modem_region@88800000': base 0x0000000000000000, size 98 MiB
216[ 0.000000] c0 0 Reserved memory: reserved region for node 'dfps_data_mem@83400000': base 0x0000000000000000, size 0 MiB
217[ 0.000000] c0 0 Reserved memory: reserved region for nde 'cont_splash_mem@83401000': base 0x0000000000000000, size 49 MiB
218[ 0.000000] c0 0 Reserved memory: reserved region for n 'cont_splash_mem_hdmi@b1c00000': base 0x0000000000000000, size 35 MiB
219[ 0.000000] c0 0 Reserved memory: reserved region for ntc_reserve1_region@0': base 0x0000000000000000, size 1 MiB
220[ 0.000000] c0 0 Reserved memory: reserved region for node 'msm_rtb_region@0': base 0x0000000000000000, size 1 MiB
221[ 0.000000] c0 0 Reserved memory: reserved region for node 'htc_reserve2_region@0': base 0x0000000000000000, size 8 MiB
222[ 0.000000] c0 0 Reserved memory: reserved region for node 'htc_rtel_region@0': base 0x0000000000000000, size 20 MiB
223[ 0.000000] c0 0 Reserved memory: reserved region for node 'ramoops_region@0': base 0x0000000000000000, size 1 MiB
224[ 0.000000] c0 0 Removed memory: created DMA memory pool at 0x0000000000000000, size 48 MiB
225[ 0.000000] c0 0 Reserved memory: initialized node removed_regions@85800000, compatible id removed-dma-pool
226[ 0.000000] c0 0 Removed memory: created DMA memory pool at 0x0000000000000000, size 45 MiB
227[ 0.000000] c0 0 Reserved memory: initialized node peripheral_region@8ea00000, compatible id removed-dma-pool
228[ 0.000000] c0 0 Reserved memory: allocated memory for 'adsp_region' node: base 0x0000000000000000, size 4 MiB
229[ 0.000000] c0 0 Reserved memory: incorrect alignment of CMA region
230[ 0.000000] c0 0 Reserved memory: allocated memory for 'qseecom_region' node: base 0x0000000000000000, size 20 MiB
231[ 0.000000] c0 0 Reserved memory: created CMA memory pool at 0x0000000000000000, size 20 MiB
232[ 0.000000] c0 0 Reserved memory: initialized node qseecom_region, compatible id shared-dma-pool
233[ 0.000000] c0 0 Reserved memory: allocated memory for 'secure_region' node: base 0x0000000000000000, size 92 MiB
234[ 0.000000] c0 0 Reserved memory: created CMA memory pool at 0x0000000000000000, size 92 MiB
235[ 0.000000] c0 0 Reserved memory: initialized node secure_region, compatible id shared-dma-pool
236[ 0.000000] c0 0 Removed memory: created DMA memory pool at 0x0000000000000000, size 98 MiB
237[ 0.000000] c0 0 Reserved memory: initialized node modem_region@88800000, compatible id removed-dma-pool
238[ 0.000000] c0 0 Removed memory: created DMA memory pool at 0x0000000000000000, size 1 MiB
239[ 0.000000] c0 0 Reserved memory: initialized node htc_reserve1_region@0, compatible id removed-dma-pool
240[ 0.000000] c0 0 Removed memory: created DMA memory pool at 0x0000000000000000, size 1 MiB
241[ 0.000000] c0 0 Reserved memory: initialized node msm_rtb_region@0, compatible id removed-dma-pool
242[ 0.000000] c0 0 Removed memory: created DMA memory pool at 0x0000000000000000, size 8 MiB
243[ 0.000000] c0 0 Reserved memory: initialized node htc_reserve2_region@0, compatible id removed-dma-pool
244[ 0.000000] c0 0 Reserved memory: created CMA memory pool at 0x0000000000000000, size 20 MiB
245[ 0.000000] c0 0 Reserved memory: initialized node htc_rtel_region@0, compatible id shared-dma-pool
246[ 0.000000] c0 0 Removed memory: created DMA memory pool at 0x0000000000000000, size 1 MiB
247[ 0.000000] c0 0 Reserved memory: initialized node ramoops_region@0, compatible id removed-dma-pool
248[ 0.000000] c0 0 cma: Reserved 32 MiB at 0x0000000000000000
249[ 0.000000] c0 0 psci: probing for conduit method from DT.
250[ 0.000000] c0 0 psci: PSCIv1.0 detected in firmware.
251[ 0.000000] c0 0 psci: Using standard PSCI v0.2 function IDs
252[ 0.000000] c0 0 psci: Initializing psci_cpu_init
253[ 0.000000] c0 0 psci: Initializing psci_cpu_init
254[ 0.000000] c0 0 psci: Initializing psci_cpu_init
255[ 0.000000] c0 0 PERCPU: Embedded 15 pages/cpu @0000000000000000 s23424 r8192 d29824 u61440
256[ 0.000000] c0 0 Built 1 zonelists in Zone order, mobility grouping on. Total pages: 974562
257[ 0.000000] c0 0 Kernel command line: earlycon=msm_hsl_uart,0x075B0000 console=ttyHSL0,115200,n8 androidboot.console=ttyHSL0 androidboot.hardware=marlin user_debug=31 ehci-hcd.park=3 lpm_levels.sleep_disabled=1 cma=32M@0-0xffffffff loop.max_part=7 selinux=0 audit=0 androidboot.bootdevice=624000.ufshc androidboot.verifiedbootstate=orange androidboot.veritymode=enforcing androidboot.keymaster=1 androidboot.serialno=HT72P0203430 androidboot.baseband=msm mdss_mdp.panel=1:dsi:0:qcom,mdss_dsi_samsung_s6e3ha3_wqhd_cmd:1:qcom,mdss_dsi_samsung_s6e3ha3_wqhd_cmd:cfg:split_dsi androidboot.slot_suffix=_b fpsimd.fpsimd_settings=0 app_setting.use_app_setting=0 kernelflag=0x00000002 debugflag=0x00000000 androidboot.hardware.revision=PVT radioflag=0x00000008 radioflagex1=0x00000000 radioflagex2=0x00000000 cpumask=0x00000000 androidboot.hardware.ddr=4096MB,Hynix,LPDDR4 androidboot.ddrinfo=00000006 androidboot.ddrsize=4GB androidboot.hardware.color=GRA00 androidboot.hardware.ufs=32GB,Samsung androidboot.msm.hw[ 0.000000] c0 0 dm: will configure 'system' on dm-0
258[ 0.000000] c0 0 log_buf_len individual max cpu contribma-reserved)
259[ 0.000000] c0 0 Virtual kernel memory layout:
260[ 0.000000] c0 0 vmalloc : 0xffffff8000000000 - 0xffffffbdbfff0000 ( 246 GB)
261[ 0.000000] c0 0 vmemmap : 0xffffffbdc0000000 - 0xffffffbfc0000000 ( 8 GB maximum)
262[ 0.000000] c0 0 0xffffffbdc0000000 - 0xffffffbdc3f95400 ( 63 MB actual)
263[ 0.000000] c0 0 PCI I/O : 0xffffffbffa000000 - 0xffffffbffb000000 ( 16 MB)
264[ 0.000000] c0 0 fixed : 0xffffffbffbdfb000 - 0xffffffbffbdff000 ( 16 KB)
265[ 0.000000] c0 0 modules : 0xffffffbffc000000 - 0xffffffc000000000 ( 64 MB)
266[ 0.000000] c0 0 memory : 0xffffffc000000000 - 0xffffffc0fe550000 ( 4069 MB)
267[ 0.000000] c0 0 .init : 0x0000000000000000 - 0x0000000000000000 ( 496 KB)
268[ 0.000000] c0 0 .text : 0x0000000000000000 - 0x0000000000000000 ( 15882 KB)
269[ 0.000000] c0 0 .data : 0x0000000000000000 - 0x0000000000000000 ( 1693 KB)
270[ 0.000000] c0 0 SLUB: HWalign=128, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
271[ 0.000000] c0 0 Preemptible hierarchical RCU implementation.
272[ 0.000000] c0 0 RCU dyntick-idle grace-period acceleration is enabled.
273[ 0.000000] c0 0 RCU kthread priority: 1.
274[ 0.000000] c0 0 NR_IRQS:64 nr_irqs:64 0
275[ 0.000000] c0 0 CPU0: found redistributor 0 region 0:0x0000000000000000
276[ 0.000000] c0 0 mpm_init_irq_domain(): Cannot find irq controller for qcom,gpio-parent
277[ 0.000000] c0 0 MPM 1 irq mapping errored -517
278[ 0.000000] c0 0 Architected cp15 and mmio timer(s) running at 19.20MHz (virt/virt).
279[ 0.000003] c0 0 sched_clock: 56 bits at 19MHz, resolution 52ns, wraps every 3579139424256ns
280[ 0.008859] c0 0 Switched to clocksource arch_sys_counter
281[ 0.015585] c0 0 Console: colour dummy device 80x25
282[ 0.021693] c0 0 allocated 16777216 bytes of page_cgroup
283[ 0.026441] c0 0 please try 'cgroup_disable=memory' option if you don't want memory cgroups
284[ 0.035188] Calibrating delay loop (skipped), value calculated using timer frequency.. 38.00 BogoMIPS (lpj=64000)
285[ 0.045408] c0 0 pid_max: default: 32768 minimum: 301
286[ 0.050945] c0 0 Security Framework initialized
287[ 0.055845] c0 0 Yama: becoming mindful.
288[ 0.060219] c0 0 Mount-cache hash table entries: 8192 (order: 4, 65536 bytes)
289[ 0.067734] c0 0 Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes)
290[ 0.076123] c0 0 Initializing cgroup subsys memory
291[ 0.080955] c0 0 Initializing cgroup subsys devices
292[ 0.086221] c0 0 Initializing cgroup subsys freezer
293[ 0.091516] c0 0 Initializing cgroup subsys net_cls
294[ 0.096812] c0 0 Initializing cgroup subsys blkio
295[ 0.101932] c0 0 Initializing cgroup subsys perf_event
296[ 0.107490] c0 0 Initializing cgroup subsys debug
297[ 0.112903] c0 1 sched-energy: Sched-energy-costs installed from DT
298[ 0.119309] c0 1 CPU0: update cpu_capacity 763
299[ 0.124179] c0 1 hw perfevents: enabled with arm/armv8-pmuv3 PMU driver, 9 counters available
300[ 0.133112] c0 1 EFI services will not be available.
301[ 0.138490] c0 1 ASID allocator initialised with 32768 entries
302[ 0.144824] c0 0 NOHZ: local_softirq_pending 02
303[ 0.168737] c0 1 MSM Memory Dump base table set up
304[ 0.173019] c0 1 MSM Memory Dump apps data table already set up in LK
305[ 0.179819] c0 1 hyp_assign_table is not functional as qcom_secure_mem is not allocated.
306[ 0.188792] c0 1 clock-cpu-8996: configuring clocks for the perf cluster
307[ 0.195659] c0 1 cpu_clock_8996_early_init: finished CPU clock configuration
308[ 0.217514] c1 0 CPU1: update cpu_capacity 763
309[ 0.217527] c1 0 CPU1: found redistributor 1 region 0:0x0000000000000000
310[ 0.217564] c1 0 CPU1: Booted secondary processor [512f2011]
311[ 0.228725] c2 0 CPU2: update cpu_capacity 1024
312[ 0.228754] c2 0 CPU2: found redistributor 100 region 0:0x0000000000000000
313[ 0.228828] c2 0 CPU2: Booted secondary processor [512f2051]
314[ 0.239766] c3 0 CPU3: update cpu_capacity 1024
315[ 0.239777] c3 0 CPU3: found redistributor 101 region 0:0x0000000000000000
316[ 0.239801] c3 0 CPU3: Booted secondary processor [512f2051]
317[ 0.239914] c0 1 Brought up 4 CPUs
318[ 0.297426] c0 1 SMP: Total of 4 processors activated.
319[ 0.302975] c0 1 CPU features: detected feature: GIC system register CPU interface
320[ 0.311124] c0 1 CPU3: update max cpu_capacity 1024
321[ 0.318109] c0 1 devtmpfs: initialized
322[ 0.328336] c0 1 DMI not present or invalid.
323[ 0.332321] c1 18 CPU1: update max cpu_capacity 763
324[ 0.332329] c2 24 CPU2: update max cpu_capacity 1024
325[ 0.342085] c0 1 pinctrl core: initialized pinctrl subsystem
326[ 0.342485] c0 1 regulator-dummy: no parameters
327[ 0.415991] c0 1 NET: Registered protocol family 16
328[ 0.422006] c0 1 schedtune: init normalization constants...
329[ 0.427000] c0 1 schedtune: CLUSTER[ 0] min_pwr: 0 max_pwr: 52
330[ 0.434366] c0 1 schedtune: CPU[0] min_pwr: 0 max_pwr: 925
331[ 0.441757] c0 1 schedtune: CPU[1] min_pwr: 0 max_pwr: 925
332[ 0.449125] c0 1 schedtune: CLUSTER[ 0] min_pwr: 0 max_pwr: 96
333[ 0.456502] c0 1 schedtune: CPU[2] min_pwr: 0 max_pwr: 1715
334[ 0.463880] c0 1 schedtune: CPU[3] min_pwr: 0 max_pwr: 1715
335[ 0.471258] c0 1 schedtune: SYSTEM min_pwr: 0 max_pwr: 5428
336[ 0.478636] c0 1 schedtune: using normalization constants mul: 2187046722 sh1: 1 sh2: 12
337[ 0.487140] c0 1 schedtune: verify normalization constants...
338[ 0.493306] c0 1 schedtune: max_pwr/2^0: 5428 => norm_pwr: 1024
339[ 0.499729] c0 1 schedtune: max_pwr/2^1: 2714 => norm_pwr: 512
340[ 0.506152] c0 1 schedtune: max_pwr/2^2: 1357 => norm_pwr: 256
341[ 0.512576] c0 1 schedtune: max_pwr/2^3: 678 => norm_pwr: 127
342[ 0.519000] c0 1 schedtune: max_pwr/2^4: 339 => norm_pwr: 63
343[ 0.525423] c0 1 schedtune: max_pwr/2^5: 169 => norm_pwr: 31
344[ 0.531847] c0 1 schedtune: configured to support 5 boost groups
345[ 0.552255] c0 1 cpuidle: using governor ladder
346[ 0.568904] c0 1 cpuidle: using governor menu
347[ 0.585564] c0 1 cpuidle: using governor qcom
348[ 0.591223] c0 1 vdso: 2 pages (1 code @ 0000000000000000, 1 data @ 0000000000000000)
349[ 0.598544] c0 1 hw-breakpoint: found 8 breakpoint and 4 watchpoint registers.
350[ 0.606548] c0 1 software IO TLB [mem 0xf6400000-0xf6800000] (4MB) mapped at [0000000000000000-0000000000000000]
351[ 0.617455] c0 1 DMA: preallocated 256 KiB pool for atomic allocations
352[ 0.642417] c0 1 sps:sps is ready.
353[ 0.645982] c0 1 i2c-msm-v2 75ba000.i2c: could not find pctldev for node /soc/pinctrl@01010000/i2c_12/i2c_12_active, deferring probe
354[ 0.658419] c0 1 i2c-msm-v2 75b5000.i2c: could not find node /soc/pinctrl@01010000/i2c_7/i2c_7_active, deferring probe
355[ 0.670165] c0 1 i2c-msm-v2 75b6000.i2c: could not find pctldev for node /soc/pinctrl@01010000/i2c_8/i2c_8_active, deferring probe
356[ 0.682376] c0 1 irq: no irq domain found for /soc/pinc00 !
357[ 0.690502] c0 1 cpu-clock-8996 6400000.qcom,cpu-clock-8996: resources init failed
358[ 0.765439] c0 1 smd_channel_probe_now: allocation table not initialized
359[ 0.771888] c0 1 smd_channel_probe_now: allocation table not initialized
360[ 0.779013] c0 1 smd_channel_probe_now: allocation table not initialized
361[ 0.786076] c0 1 smd_channel_probe_now: allocation table not initialized
362[ 0.793172] c0 1 msm_watchdog 9830000.qcom,wdt: wdog absent resource not present
363[ 0.800994] c0 1 msm_watchdog 9830000.qcom,wdt: MSM Watchdog Initialized
364[ 0.808300] c0 1 platform 83700000.qcom,msm-rtb: assigned reserved memory node msm_rtb_region@0
365[ 0.817822] c0 1 msm_rpm_dev_probe: APSS-RPM communication over GLINK
366[ 0.831902] c0 1 spmi_pmic_arb 400f000.qcom,spmi: PMIC Arb Version-2 0x20010000
367[ 0.840380] c0 1 spmi_pmic_arb 400f000.qcom,spmi: missing property: qcom,pmic-arb-max-periph-interrupts
368[ 0.854375] c0 1 pmi8994_s2: 400 <--> 1065 mV at 1000 mV normal idle
369[ 0.861037] c0 1 platform 9300000.qcom,lpass: assigned reserved memory node peripheral_region@8ea00000
370[ 0.871019] c0 1 platform ce0000.qcom,venus: assigned reserved memory node peripheral_region@8ea00000
371[ 0.880630] c0 1 platform 1c00000.qcom,ssc: assigned reserved memory node peripheral_region@8ea00000
372[ 0.889940] c0 1 platform 2080000.qcom,mss: assigned reserved memory node modem_region@88800000
373[ 0.901413] c0 1 msm-thermal 70000.qcom,msm-thermal: msm_thermal:Failed reading node=/soc/qcom,msm-thermal, key=qcom,rpm-phase-resource-type err=-22. KTM continues
374[ 0.915491] c0 1 msm-thermal 70000.qcom,msm-thermal: ms-thermal, key=qcom,gfx-sensor-id. err=-22. KTM continues
375[ 0.929676] c0 1 msm-thermal 70000.qcom,msm-thermal: probe_vdd_mx:Failed reading node=/soc/qcom,msm-thermal, key=qcom,mx-restriction-temp. KTM continues
376[ 0.943734] c0 1 msm-thermal 70000.qcom,msm-thermal: pr/qcom,msm-thermal, key=qcom,pmic-sw-mode-temp. err=-22. KTM continues
377[ 0.958248] c0 1 msm_thermal:vdd_restriction_reg_init Dregulator vdd-dig probe
378[ 0.966213] c0 1 msm_thermal:probe_vdd_rstr Err regulator init. err:-517. KTM continues.
379[ 0.974720] c0 1 msm-thermal 70000.qcom,msm-thermal: probe_vdd_rstr:Failed reading node=/soc/qcom,msm-thermal, key=qcom,max-freq-level. err=-517. KTM continues
380[ 0.999518] c0 1 msm_cache_erp64 6500000.qcom,cache_erp64: Registering for L1 error interrupts
381[ 1.007583] c0 4 smd_channel_probe_now: allocation table not initialized
382[ 1.015136] c0 51 msm_rpm_trans_notify_state: glink config params: transport=(null), edge=rpm, name=rpm_requests
383[ 1.025406] c0 1 msm_cache_erp64 6500000.qcom,cache_erp64: Registering for L2 error interrupts
384[ 1.034434] c0 1 msm_cache_erp64 6500000.qcom,cache_erp64: Registering for L3 error interrupts
385[ 1.043685] c0 1 msm_m4m_erp 9a40000.qcom,m4m_erp64: Registering for M4M error interrupts
386[ 1.053950] c0 1 apc0_pwrcl_mem_acc_corner: 0 <--> 0 mV
387[ 1.059046] c0 1 apc1_perfcl_mem_acc_corner: 0 <--> 0 mV
388[ 1.064825] c0 1 apcc_l3_mem_acc_corner: 0 <--> 0 mV
389[ 1.070263] c0 1 gfx_mem_acc_corner: 0 <--> 0 mV
390[ 1.075468] c0 1 kryo0-retention: 468 <--> 892 mV at 520 mV
391[ 1.081340] c0 1 kryo0: 468 <--> 892 mV at 754 mV
392[ 1.086472] c0 1 kryo_regulator_probe: kryo0: default LDO functional volt=754021 uV, LDO retention volt=521789 uV, Vref func=325285 + 4466*(val), cluster-num=0
393[ 1.101346] c0 1 kryo1-retention: 468 <--> 892 mV at 52468 <--> 892 mV at 754 mV
394[ 1.112425] c0 1 kryo_regulator_probe: kryo1: default LDO functional volt=754021 uV, LDO retention volt=521789 uV, Vref func=325285 + 4466*(val), cluster-num=1
395[ 1.131918] c0 1 platform soc:qcom,kgsl-hyp: assigned reserved memory node peripheral_region@8ea00000
396[ 1.142098] c0 1 msm_mpm_dev_probe(): Cannot get clk resource for XO: -517
397[ 1.168105] c0 1 __of_mpm_init(): MPM driver mapping exists
398[ 1.174333] c0 1 platform 84000000.qcom,rmtfs_rtel_sharedmem: assigned reserved memory node htc_rtel_region@0
399[ 1.185582] c0 1 console [pstore-1] enabled
400[ 1.189387] c0 1 pstore: Registered ramoops as persistent store backend
401[ 1.196212] c0 1 ramoops: attached 0x100000@0x83500000, ecc: 0/0
402[ 1.204059] c0 1 bootloader_log: allocate buffer for bootloader log, size: 458752
403[ 1.211210] c0 1 bldr_log_parser: size 18384
404[ 1.215705] c0 1 bootloader_log: allocate buffer for last bootloader log, size: 458752
405[ 1.224176] c0 1 bldr_log_parser: size 17712
406[ 1.237920] c0 1 i2c-msm-v2 7577000.i2c: probing driver i2c-msm-v2
407[ 1.243701] c0 1 i2c-msm-v2 7577000.i2c: error on clk_get(core_clk):-517
408[ 1.250645] c0 1 i2c-msm-v2 7577000.i2c: error probe() failed with err:-517
409[ 1.259377] c0 1 i2c-msm-v2 75b7000.i2c: probing driver i2c-msm-v2
410[ 1.265118] c0 1 i2c-msm-v2 75b7000.i2c: error on clk_get(core_clk):-517
411[ 1.272099] c0 1 i2c-msm-v2 75b7000.i2c: error probe() failed with err:-517
412[ 1.284396] c0 53 i2c-msm-v2 75ba000.i2c: probing driver i2c-msm-v2
413[ 1.290155] c0 53 i2c-msm-v2 75ba000.i2c: error on clk_get(core_clk):-517
414[ 1.297122] c0 53 i2c-msm-v2 75ba000.i2c: error probe() failed with err:-517
415[ 1.305014] c0 53 i2c-msm-v2 75b5000.i2c: probing driver i2c-msm-v2
416[ 1.311205] c0 53 i2c-msm-v2 75b5000.i2c: error on clk_get(core_clk):-517
417[ 1.318213] c0 53 i2c-msm-v2 75b5000.i2c: error probe() failed with err:-517
418[ 1.325978] c0 53 i2c-msm-v2 75b6000.i2c: probing driver i2c-msm-v2
419[ 1.332304] c0 53 i2c-msm-v2 75b6000.i2c: error on clk_get(core_clk):-517
420[ 1.339307] c0 53 i2c-msm-v2 75b6000.i2c: error probe() failed with err:-517
421[ 1.346874] c0 53 cpu-clock-8996 6400000.qcom,cpu-clock-8996: resources init failed
422[ 1.355495] c0 53 pm8994_s1_corner: 0 <--> 0 mV at 0 mV normal idle
423[ 1.361817] c0 53 pm8994_s1_floor_corner: 0 <--> 0 mV at 0 mV normal idle
424[ 1.368951] c0 53 pm8994_s1_corner_ao: 0 <--> 0 mV at 0 mV normal idle
425[ 1.375918] c0 53 pm8994_s2_corner: 0 <--> 0 mV at 0 mV normal idle
426[ 1.382568] c0 53 pm8994_s2_corner_ao: 0 <--> 0 mV at 0 mV normal idle
427[ 1.389561] c0 53 pm8994_s3: 1300 mV normal idle
428[ 1.394596] c0 53 pm8994_s4: 1800 mV normal idle
429[ 1.399600] c0 53 pm8994_s5: 2150 mV normal idle
430[ 1.404648] c0 53 pm8994_s7: 800 mV normal idle
431[ 1.409593] c0 53 pm8994_l1: 1000 mV normal idle
432[ 1.414645] c0 53 pm8994_l2: 1250 mV normal idle
433[ 1.419990] c0 53 pm8994_l3: 1100 mV normal idle
434[ 1.424719] c0 53 pm8994_l4: 1225 mV normal idle
435[ 1.430124] c0 53 pm8994_l6: 1800 mV normal idle
436[ 1.434820] c0 53 pm8994_l8: 1800 mV normal idle
437[ 1.439795] c0 53 pm8994_l9: 1800 mV normal idle
438[ 1.444848] c0 53 pm8994_l10: 2850 mV normal idle
439[ 1.449954] c0 53 pm8994_l11: 1200 mV normal idle
440[ 1.455092] c0 53 pm8994_l12: 1800 mV normal idle
441[ 1.460558] c0 53 pm8994_l13: 1800 <--> 2950 mV at 2950 mV normal idle
442[ 1.467196] c0 53 pm8994_l14: 1800 mV normal idle
443[ 1.472728] c0 53 pm8994_l15: 1800 mV normal idle
444[ 1.477392] c0 53 pm8994_l16: 2700 mV normal idle
445[ 1.482932] c0 53 pm8994_l17: 3300 mV normal idle
446[ 1.487952] c0 53 pm8994_l18: 1800 <--> 1900 mV at 1800 mV normal idle
447[ 1.494566] c0 53 pm8994_l18_pin_ctrl: 2700 <--> 2900 mV at 2700 mV normal idle
448[ 1.502617] c0 53 pm8994_l19: 2850 mV normal idle
449[ 1.507477] c0 53 pm8994_l20: 2950 mV normal idle
450[ 1.512735] c0 53 pm8994_l21: 3000 <--> 3300 mV at 3000 mV normal idle
451[ 1.519697] c0 53 pm8994_l22: 3300 mV normal idle
452[ 1.524653] c0 53 pm8994_l23: 1800 mV normal idle
453[ 1.529755] c0 53 pm8994_l24: 3075 mV normal idle
454[ 1.534850] c0 53 pm8994_l25: 1200 mV normal idle
455[ 1.540371] c0 53 pm8994_l26_corner: 0 <--> 0 mV at 0 mV normal idle
456[ 1.546723] c0 53 pm8994_l26_floor_corner: 0 <--> 0 mV at 0 mV normal idle
457[ 1.554051] c0 53 pm8994_l27: 1000 mV normal idle
458[ 1.559181] c0 53 pm8994_l28: 925 mV normal idle
459[ 1.564516] c0 53 pm8994_l29: 3000 mV normal idle
460[ 1.569338] c0 53 pm8994_l30: 1800 mV normal idle
461[ 1.574445] c0 53 pm8994_l32: 1800 mV normal idle
462[ 1.580952] c0 53 pm8994_lvs1: no parameters
463[ 1.584988] c0 53 pm8994_lvs2: no parameters
464[ 1.589544] c0 53 pmi8994_s1: 1025 mV normal idle
465[ 1.594696] c0 53 pmi8994_boost_5v: no parameters
466[ 1.599481] c0 53 qcom,rpm-smd-regulator soc:qcom,rpm-smd:rpm-regulator-bstb:regulator-bst: Failed to find supply parent
467[ 1.610598] c0 53 rpm_vreg_device_probe: regulator_register failed: pmi8994_boost_5v, rc=-517
468[ 1.619693] c0 53 pmi8994_boost_pin_ctrl: no parameters
469[ 1.625008] c0 53 qcom,rpm-smd-regulator soc:qcom,rpm-smd:rpm-regulator-bstb:regulator-bst-pin-ctrl: Failed to find supply parent
470[ 1.636981] c0 53 rpm_vreg_device_probe: regulator_regisd: pmi8994_boost_pin_ctrl, rc=-517
471[ 1.646637] c0 53 pmi8994_boostbypass: 3150 <--> 3600 mV at 3150 mV normal idle
472[ 1.654331] c0 53 pm8994_s11: 470 <--> 1140 mV at 905 mV normal idle
473[ 1.660965] c0 53 pm8994_s11_avs_limit: 470 <--> 1140 mV
474[ 1.666582] c0 53 spm_regulator_probe: name=pm8994_s11, range=LV, voltage=905000 uV, mode=AUTO, step rate=2400 uV/us
475[ 1.678480] c0 53 msm-thermal 70000.qcom,msm-thermal: msm_thermal:Failed reading node=/soc/qcom,msm-thermal, key=qcom,rpm-phase-resource-type err=-22. KTM continues
476[ 1.692557] c0 53 msm-thermal 70000.qcom,msm-thermal: ms-thermal, key=qcom,gfx-sensor-id. err=-22. KTM continues
477[ 1.706738] c0 53 msm_thermal:sensor_mgr_init_threshold threshold id already initialized
478[ 1.715158] c0 53 msm-thermal 70000.qcom,msm-thermal: probe_vdd_mx:Failed reading node=/soc/qcom,msm-thermal, key=qcom,mx-restriction-temp. KTM continues
479[ 1.729221] c0 53 msm-thermal 70000.qcom,msm-thermal: pr/qcom,msm-thermal, key=qcom,pmic-sw-mode-temp. err=-22. KTM continues
480[ 1.744069] c0 53 msm_thermal:vdd_restriction_reg_init Dregulator vdd-gfx probe
481[ 1.751717] c0 53 msm_thermal:probe_vdd_rstr Err regulator init. err:-517. KTM continues.
482[ 1.760209] c0 53 msm-thermal 70000.qcom,msm-thermal: probe_vdd_rstr:Failed reading node=/soc/qcom,msm-thermal, key=qcom,max-freq-level. err=-517. KTM continues
483[ 1.775404] c0 53 msm_mpm_dev_probe(): Cannot get clk re 53 i2c-msm-v2 7577000.i2c: probing driver i2c-msm-v2
484[ 1.788992] c0 53 i2c-msm-v2 7577000.i2c: error on clk_get(core_clk):-517
485[ 1.795932] c0 53 i2c-msm-v2 7577000.i2c: error probe() failed with err:-517
486[ 1.803951] c0 53 i2c-msm-v2 75b7000.i2c: probing driver i2c-msm-v2
487[ 1.810002] c0 53 i2c-msm-v2 75b7000.i2c: error on clk_get(core_clk):-517
488[ 1.816984] c0 53 i2c-msm-v2 75b7000.i2c: error probe() failed with err:-517
489[ 1.825004] c0 53 i2c-msm-v2 75ba000.i2c: probing driver i2c-msm-v2
490[ 1.831072] c0 53 i2c-msm-v2 75ba000.i2c: error on clk_get(core_clk):-517
491[ 1.838077] c0 53 i2c-msm-v2 75ba000.i2c: error probe() failed with err:-517
492[ 1.845912] c0 53 i2c-msm-v2 75b5000.i2c: probing driver i2c-msm-v2
493[ 1.852158] c0 53 i2c-msm-v2 75b5000.i2c: error on clk_get(core_clk):-517
494[ 1.859171] c0 53 i2c-msm-v2 75b5000.i2c: error probe() failed with err:-517
495[ 1.866941] c0 53 i2c-msm-v2 75b6000.i2c: probing driver i2c-msm-v2
496[ 1.873258] c0 53 i2c-msm-v2 75b6000.i2c: error on clk_get(core_clk):-517
497[ 1.880273] c0 53 i2c-msm-v2 75b6000.i2c: error probe() failed with err:-517
498[ 1.887970] c0 53 cpu-clock-8996 6400000.qcom,cpu-clock-8996: resources init failed
499[ 1.911838] c0 53 qcom,gcc-8996 300000.qcom,gcc: Registered GCC clocks.
500[ 1.918855] c0 53 vfe0_clk_src: set OPP pair(75000000 Hz: 3 uV) on a10000.qcom,vfe0
501[ 1.925903] c0 53 vfe0_clk_src: set OPP pair(320000000 Hz: 5 uV) on a10000.qcom,vfe0
502[ 1.933968] c0 53 vfe0_clk_src: set OPP pair(600000000 Hz: 7 uV) on a10000.qcom,vfe0
503[ 1.942410] c0 53 vfe1_clk_src: set OPP pair(75000000 Hz: 3 uV) on a14000.qcom,vfe1
504[ 1.950036] c0 53 vfe1_clk_src: set OPP pair(320000000 Hz: 5 uV) on a14000.qcom,vfe1
505[ 1.958100] c0 53 vfe1_clk_src: set OPP pair(600000000 Hz: 7 uV) on a14000.qcom,vfe1
506[ 1.966534] c0 53 cpp_clk_src: set OPP pair(100000000 Hz: 3 uV) on a04000.qcom,cpp
507[ 1.974097] c0 53 cpp_clk_src: set OPP pair(480000000 Hz: 5 uV) on a04000.qcom,cpp
508[ 1.981971] c0 53 cpp_clk_src: set OPP pair(640000000 Hz: 7 uV) on a04000.qcom,cpp
509[ 1.996851] c0 53 qcom,mmsscc-8996 8c0000.qcom,mmsscc: Registered MMSS clocks.
510[ 2.005276] c0 53 pmi8994_boost_5v: no parameters
511[ 2.009499] c0 53 qcom,rpm-smd-regulator soc:qcom,rpm-smd:rpm-regulator-bstb:regulator-bst: Failed to find supply parent
512[ 2.020602] c0 53 rpm_vreg_device_probe: regulator_register failed: pmi8994_boost_5v, rc=-517
513[ 2.029578] c0 53 pmi8994_boost_pin_ctrl: no parameters
514[ 2.035011] c0 53 qcom,rpm-smd-regulator soc:qcom,rpm-smd:rpm-regulator-bstb:regulator-bst-pin-ctrl: Failed to find supply parent
515[ 2.046981] c0 53 rpm_vreg_device_probe: regulator_regisd: pmi8994_boost_pin_ctrl, rc=-517
516[ 2.057301] c0 53 msm-thermal 70000.qcom,msm-thermal: msm_thermal:Failed reading node=/soc/qcom,msm-thermal, key=qcom,rpm-phase-resource-type err=-22. KTM continues
517[ 2.071370] c0 53 msm-thermal 70000.qcom,msm-thermal: ms-thermal, key=qcom,gfx-sensor-id. err=-22. KTM continues
518[ 2.085557] c0 53 msm_thermal:sensor_mgr_init_threshold threshold id already initialized
519[ 2.093978] c0 53 msm-thermal 70000.qcom,msm-thermal: probe_vdd_mx:Failed reading node=/soc/qcom,msm-thermal, key=qcom,mx-restriction-temp. KTM continues
520[ 2.108042] c0 53 msm-thermal 70000.qcom,msm-thermal: pr/qcom,msm-thermal, key=qcom,pmic-sw-mode-temp. err=-22. KTM continues
521[ 2.122696] c0 53 msm_thermal:vdd_restriction_reg_init Dregulator vdd-gfx probe
522[ 2.130532] c0 53 msm_thermal:probe_vdd_rstr Err regulator init. err:-517. KTM continues.
523[ 2.139029] c0 53 msm-thermal 70000.qcom,msm-thermal: probe_vdd_rstr:Failed reading node=/soc/qcom,msm-thermal, key=qcom,max-freq-level. err=-517. KTM continues
524[ 2.154272] c0 53 cpr3_msm8996_hmss_read_fuse_data: apc01855] c0 53 cpr3_msm8996_hmss_read_fuse_data: apc0_pwrcl_corner: CPR fusing revision = 2
525[ 2.170744] c0 53 cpr3_msm8996_hmss_read_fuse_data: apc0ant fuses = N
526[ 2.179863] c0 53 cpr3_msm8996_hmss_read_fuse_data: apc0_pwrcl_corner: CPR limitation = none
527[ 2.188593] c0 53 cpr3_msm8996_hmss_read_fuse_data: apc0_pwrcl_corner: CPR partial binning limitation = none
528[ 2.198750] c0 53 cpr3_msm8996_hmss_read_fuse_data: apc0_pwrcl_corner: Retention voltage fuses: VDD_MX = 4, VDD_APCC = 4
529[ 2.210180] c0 53 cpr3_hmss_kvreg_init: apc0_pwrcl_corner: LDO min headroom=80000 uV, LDO max headroom=470000 uV, LDO adj=0 uV, LDO mode=allowed, LDO retention=490000 uV
530[ 2.225659] c0 53 cpr3_msm8996_hmss_calculate_open_loop_loop= 565000 uV
531[ 2.236511] c0 53 cpr3_msm8996_hmss_calculate_open_loop_voltages: apc0_pwrcl_corner: fused SVS: open-loop= 625000 uV
532[ 2.247619] c0 53 cpr3_msm8996_hmss_calculate_open_loop_voltages: apc0_pwrcl_corner: fused NOM: open-loop= 715000 uV
533[ 2.258730] c0 53 cpr3_msm8996_hmss_calculate_open_loop_voltages: apc0_pwrcl_corner: fused TURBO: open-loop= 850000 uV
534[ 2.269951] c0 53 cpr3_msm8996_hmss_calculate_target_quotients: apc0_pwrcl_corner: fused MinSVS: quot[ 7]= 284
535[ 2.280173] c0 53 cpr3_msm8996_hmss_calculate_target_quotients: apc0_pwrcl_corner: fused SVS: quot[ 7]= 390, quot_offset[ 7]= 100
536[ 2.292411] c0 53 cpr3_msm8996_hmss_calculate_target_quo0_pwrcl_corner: fused NOM: quot[ 7]= 596, quot_offset[ 7]= 205
537[ 2.304660] c0 53 cpr3_msm8996_hmss_calculate_target_quoients: apc0_pwrcl_corner: fused TURBO: quot[ 7]= 911, quot_offset[ 7]= 315
538[ 2.317038] c0 53 cpr3_msm8996_hmss_read_fuse_data: apc0r: speed bin = 1
539[ 2.324790] c0 53 cpr3_msm8996_hmss_read_fuse_data: apc0_cbf_corner: CPR fusing revision = 2
540[ 2.333558] c0 53 cpr3_msm8996_hmss_read_fuse_data: apc0_cbf_corner: using redundant fuses = N
541[ 2.342498] c0 53 cpr3_msm8996_hmss_read_fuse_data: apc0_cbf_corner: CPR limitation = none
542[ 2.351090] c0 53 cpr3_msm8996_hmss_read_fuse_data: apc0_cbf_corner: CPR partial binning limitation = none
543[ 2.361076] c0 53 cpr3_msm8996_hmss_read_fuse_data: apc0_cbf_corner: Retention voltage fuses: VDD_MX = 4, VDD_APCC = 4
544[ 2.372255] c0 53 cpr3_msm8996_hmss_calculate_open_loop_voltages: apc0_cbf_corner: fused MinSVS: open-loop= 565000 uV
545[ 2.383036] c0 53 cpr3_msm8996_hmss_calculate_open_loop_voltages: apc0_cbf_corner: fused SVS: open-loop= 625000 uV
546[ 2.393973] c0 53 cpr3_msm8996_hmss_calculate_open_loop_voltages: apc0_cbf_corner: fused NOM: open-loop= 715000 uV
547[ 2.404910] c0 53 cpr3_msm8996_hmss_calculate_open_loop_voltages: apc0_cbf_corner: fused TURBO: open-loop= 850000 uV
548[ 2.415855] c0 53 cpr3_msm8996_hmss_calculate_open_loop_voltages: apc0_cbf_corner: fused MinSVS: CBF offset open-loop= 535000 uV
549[ 2.427741] c0 53 cpr3_msm8996_hmss_calculate_open_loop_: apc0_cbf_corner: fused LowSVS: CBF offset open-loop= 645000 uV
550[ 2.439636] c0 53 cpr3_msm8996_hmss_calculate_open_loop_voltages: apc0_cbf_corner: fused SVS: CBF offset open-loop= 645000 uV
551[ 2.451525] c0 53 cpr3_msm8996_hmss_calculate_open_loop_: apc0_cbf_corner: fused NOM: CBF offset open-loop= 765000 uV
552[ 2.463416] c0 53 cpr3_msm8996_hmss_calculate_open_loop_voltages: apc0_cbf_corner: fused TURBO: CBF offset open-loop= 890000 uV
553[ 2.475348] c0 53 cpr3_msm8996_hmss_calculate_target_quoapc0_cbf_corner: fused MinSVS: quot[ 7]= 284
554[ 2.485467] c0 53 cpr3_msm8996_hmss_calculate_target_quotients: apc0_cbf_corner: fused SVS: quot[ 7]= 390, quot_offset[ 7]= 100
555[ 2.497532] c0 53 cpr3_msm8996_hmss_calculate_target_quoc0_cbf_corner: fused NOM: quot[ 7]= 596, quot_offset[ 7]= 205
556[ 2.509598] c0 53 cpr3_msm8996_hmss_calculate_target_quotients: apc0_cbf_corner: fused TURBO: quot[ 7]= 911, quot_offset[ 7]= 315
557[ 2.521807] c0 53 cpr3_msm8996_hmss_read_fuse_data: apc1peed bin = 1
558[ 2.529218] c0 53 cpr3_msm8996_hmss_read_fuse_data: apc1_corner: CPR fusing revision = 2
559[ 2.537637] c0 53 cpr3_msm8996_hmss_read_fuse_data: apc1_corner: using redundant fuses = N
560[ 2.546230] c0 53 cpr3_msm8996_hmss_read_fuse_data: apc1_corner: CPR limitation = none
561[ 2.554476] c0 53 cpr3_msm8996_hmss_read_fuse_data: apc1_corner: CPR partial binning limitation = none
562[ 2.564114] c0 53 cpr3_msm8996_hmss_read_fuse_data: apc1_corner: Retention voltage fuses: VDD_MX = 4, VDD_APCC = 4
563[ 2.575035] c0 53 cpr3_hmss_kvreg_init: apc1_corner: LDO min headroom=130000 uV, LDO max headroom=470000 uV, LDO adj=0 uV, LDO mode=allowed, LDO retention=490000 uV
564[ 2.590044] c0 53 cpr3_msm8996_hmss_calculate_open_loop_oop= 605000 uV
565[ 2.600409] c0 53 cpr3_msm8996_hmss_calculate_open_loop_voltages: apc1_corner: fused SVS: open-loop= 665000 uV
566[ 2.610987] c0 53 cpr3_msm8996_hmss_calculate_open_loop_voltages: apc1_corner: fused NOM: open-loop= 735000 uV
567[ 2.621577] c0 53 cpr3_msm8996_hmss_calculate_open_loop_voltages: apc1_corner: fused TURBO: open-loop= 930000 uV
568[ 2.632311] c0 53 cpr3_msm8996_hmss_calculate_target_quotients: apc1_corner: fused MinSVS: quot[ 7]= 365
569[ 2.641979] c0 53 cpr3_msm8996_hmss_calculate_target_quotients: apc1_corner: fused SVS: quot[ 7]= 479, quot_offset[ 7]= 110
570[ 2.653696] c0 53 cpr3_msm8996_hmss_calculate_target_quo: apc1_corner: fused NOM: quot[ 7]= 640, quot_offset[ 7]= 160
571[ 2.665414] c0 53 cpr3_msm8996_hmss_calculate_target_quotients: apc1_corner: fused TURBO: quot[ 7]=1074, quot_offset[ 7]= 430
572[ 2.677620] cpr3_regulator_init_ctrl: apcc: Default CPR modeclosed-loop
573[ 2.684220] c0 53 apc0_pwrcl_corner: 0 <--> 0 mV at 0 mV
574[ 2.690188] c0 53 apc0_cbf_corner: 0 <--> 0 mV at 0 mV
575[ 2.698179] c0 53 cpr3_regulator_measure_aging: apcc: average quotient delta=-18 (count=10)
576[ 2.705890] c0 53 cpr3_regulator_aging_adjust: apcc: aging measurement successful; aging reference adjustment voltage=625 uV
577[ 2.717569] c0 53 apc1_corner: 0 <--> 0 mV at 0 mV
578[ 2.724359] c0 53 cpr3_msm8996_mmss_read_fuse_data: gfx_corner: speed bin = 1
579[ 2.730894] c0 53 cpr3_msm8996_mmss_read_fuse_data: gfx_corner: CPR fusing revision = 1
580[ 2.739196] c0 53 cpr3_msm8996_mmss_read_fuse_data: gfx_corner: CPR limitation = none
581[ 2.747770] c0 53 cpr3_msm8996_mmss_calculate_open_loop_voltages: gfx_corner: fuse_corner[0] open-loop= 620000 uV
582[ 2.757909] c0 53 cpr3_msm8996_mmss_calculate_open_loop_voltages: gfx_corner: fuse_corner[1] open-loop= 665000 uV
583[ 2.768496] c0 53 cpr3_msm8996_mmss_calculate_open_loop_voltages: gfx_corner: fuse_corner[2] open-loop= 785000 uV
584[ 2.779087] c0 53 cpr3_msm8996_mmss_calculate_open_loop_voltages: gfx_corner: fuse_corner[3] open-loop= 925000 uV
585[ 2.789852] cpr3_regulator_init_ctrl: gfx: Default CPR mode = closed-loop
586[ 2.796419] c0 53 gfx_corner: 0 <--> 0 mV at 0 mV
587[ 2.806668] c0 53 i2c-msm-v2 7577000.i2c: probing driver i2c-msm-v2
588[ 2.812553] AXI: msm_bus_scale_register_client(): msm_bus_scale_register_client: Bus driver not ready.
589[ 2.821445] c0 53 i2c-msm-v2 7577000.i2c: msm_bus_scale_register_client(mstr-id:86):0 (not a problem)
590[ 2.832123] AXI: msm_bus_scale_register_client(): msm_bus_scale_register_client: Bus driver not ready.
591[ 2.845101] c0 53 i2c-msm-v2 75b7000.i2c: probing driver i2c-msm-v2
592[ 2.851083] AXI: msm_bus_scale_register_client(): msm_bus_scale_register_client: Bus driver not ready.
593[ 2.860025] c0 53 i2c-msm-v2 75b7000.i2c: msm_bus_scale_register_client(mstr-id:84):0 (not a problem)
594[ 2.870512] AXI: msm_bus_scale_register_client(): msm_bus_scale_register_client: Bus driver not ready.
595[ 2.880070] c0 53 i2c-msm-v2 75ba000.i2c: probing driver i2c-msm-v2
596[ 2.886031] AXI: msm_bus_scale_register_client(): msm_bus_scale_register_client: Bus driver not ready.
597[ 2.895026] c0 53 i2c-msm-v2 75ba000.i2c: msm_bus_scale_register_client(mstr-id:84):0 (not a problem)
598[ 2.905431] AXI: msm_bus_scale_register_client(): msm_bus_scale_register_client: Bus driver not ready.
599[ 2.914938] c0 53 i2c-msm-v2 75b5000.i2c: probing driver i2c-msm-v2
600[ 2.920923] AXI: msm_bus_scale_register_client(): msm_bus_scale_register_client: Bus driver not ready.
601[ 2.929857] c0 53 i2c-msm-v2 75b5000.i2c: msm_bus_scale_register_client(mstr-id:84):0 (not a problem)
602[ 2.940154] AXI: msm_bus_scale_register_client(): msm_bus_scale_register_client: Bus driver not ready.
603[ 2.949948] c0 53 i2c-msm-v2 75b6000.i2c: probing driver i2c-msm-v2
604[ 2.955914] AXI: msm_bus_scale_register_client(): msm_bus_scale_register_client: Bus driver not ready.
605[ 2.964920] c0 53 i2c-msm-v2 75b6000.i2c: msm_bus_scale_register_client(mstr-id:84):0 (not a problem)
606[ 2.975111] AXI: msm_bus_scale_register_client(): msm_bus_scale_register_client: Bus driver not ready.
607[ 2.984923] c0 53 cpu-clock-8996 6400000.qcom,cpu-clock-8996: using perf/pwr/cbf speed bin 1 and pvs_ver 0
608[ 2.996098] c0 53 clock-cpu-8996: set OPP pair (307200000 Hz, 555000 uv) on cpu0
609[ 3.002929] c0 53 clock-cpu-8996: set OPP pair (1593600000 Hz, 780000 uv) on cpu0
610[ 3.010742] c0 53 clock-cpu-8996: set OPP pair (307200000 Hz, 555000 uv) on cpu1
611[ 3.018434] c0 53 clock-cpu-8996: set OPP pair (1593600000 Hz, 780000 uv) on cpu1
612[ 3.026239] c0 53 clock-cpu-8996: set OPP pair (307200000 Hz, 595000 uv) on cpu2
613[ 3.033947] c0 53 clock-cpu-8996: set OPP pair (2150400000 Hz, 905000 uv) on cpu2
614[ 3.041742] c0 53 clock-cpu-8996: set OPP pair (307200000 Hz, 595000 uv) on cpu3
615[ 3.049476] c0 53 clock-cpu-8996: set OPP pair (2150400000 Hz, 905000 uv) on cpu3
616[ 3.057398] c0 53 clock-cpu-8996: set OPP pair (192000000 Hz, 540000 uv) on soc:qcom,m4m
617[ 3.065709] c0 53 clock-cpu-8996: set OPP pair (1593600000 Hz, 895000 uv) on soc:qcom,m4m
618[ 3.074596] c0 53 qcom,gpucc-8996 8c0000.qcom,gpucc: using speed bin 1
619[ 3.081478] c0 53 gfx3d_clk_src_v2: set OPP pair(133000000 Hz: 550000 uV) on b00000.qcom,kgsl-3d0
620[ 3.090277] c0 53 gfx3d_clk_src_v2: set OPP pair(624000000 Hz: 880000 uV) on b00000.qcom,kgsl-3d0
621[ 3.100797] c0 53 qcom,gpucc-8996 8c0000.qcom,gpucc: Registered GPU clocks.
622[ 3.107334] c0 53 pmi8994_boost_5v: no parameters
623[ 3.112241] c0 53 qcom,rpm-smd-regulator soc:qcom,rpm-smd:rpm-regulator-bstb:regulator-bst: Failed to find supply parent
624[ 3.123410] c0 53 rpm_vreg_device_probe: regulator_register failed: pmi8994_boost_5v, rc=-517
625[ 3.132408] c0 53 pmi8994_boost_pin_ctrl: no parameters
626[ 3.137807] c0 53 qcom,rpm-smd-regulator soc:qcom,rpm-smd:rpm-regulator-bstb:regulator-bst-pin-ctrl: Failed to find supply parent
627[ 3.149788] c0 53 rpm_vreg_device_probe: regulator_regisd: pmi8994_boost_pin_ctrl, rc=-517
628[ 3.160222] c0 53 msm-thermal 70000.qcom,msm-thermal: msm_thermal:Failed reading node=/soc/qcom,msm-thermal, key=qcom,rpm-phase-resource-type err=-22. KTM continues
629[ 3.174287] c0 53 msm-thermal 70000.qcom,msm-thermal: ms-thermal, key=qcom,gfx-sensor-id. err=-22. KTM continues
630[ 3.188476] c0 53 msm_thermal:sensor_mgr_init_threshold threshold id already initialized
631[ 3.196898] c0 53 msm-thermal 70000.qcom,msm-thermal: probe_vdd_mx:Failed reading node=/soc/qcom,msm-thermal, key=qcom,mx-restriction-temp. KTM continues
632[ 3.210961] c0 53 msm-thermal 70000.qcom,msm-thermal: pr/qcom,msm-thermal, key=qcom,pmic-sw-mode-temp. err=-22. KTM continues
633[ 3.225727] c0 53 msm_thermal:update_cpu_freq Unable to e policy for cpu:0. err:-19
634[ 3.233796] c0 53 msm_thermal:update_cpu_freq Unable to update policy for cpu:2. err:-19
635[ 3.242222] c0 53 msm_thermal:update_cpu_freq Unable to update policy for cpu:2. err:-19
636[ 3.250638] c0 53 msm-thermal 70000.qcom,msm-thermal: probe_ocr:Failed reading node=/soc/qcom,msm-thermal, key=qcom,pmic-opt-curr-temp err:-22. KTM continues
637[ 3.266201] c0 4 msm_thermal:update_cpu_freq Unable to [ 3.273703] c0 4 msm_thermal:update_cpu_freq Unable to update policy for cpu:2. err:-19
638[ 3.282042] c0 4 msm_thermal:update_cpu_freq Unable to 19
639[ 3.290682] c0 53 pmi8994_boost_5v: no parameters
640[ 3.295637] c0 53 qcom,rpm-smd-regulator soc:qcom,rpm-smd:rpm-regulator-bstb:regulator-bst: Failed to find supply parent
641[ 3.306807] c0 53 rpm_vreg_device_probe: regulator_register failed: pmi8994_boost_5v, rc=-517
642[ 3.315765] c0 53 pmi8994_boost_pin_ctrl: no parameters
643[ 3.321184] c0 53 qcom,rpm-smd-regulator soc:qcom,rpm-smd:rpm-regulator-bstb:regulator-bst-pin-ctrl: Failed to find supply parent
644[ 3.333164] c0 53 rpm_vreg_device_probe: regulator_regisd: pmi8994_boost_pin_ctrl, rc=-517
645[ 3.389505] c0 1 KPI: Bootloader start count = 38796
646[ 3.393961] c0 1 KPI: Bootloader end count = 2593695
647[ 3.399274] c0 1 KPI: Bootloader display count = 66118
648[ 3.404823] c0 1 KPI: Bootloader load kernel count = 209757456
649[ 3.411627] c0 1 KPI: Kernel MPM timestamp = 2741658
650[ 3.416457] c0 1 KPI: Kernel MPM Clock frequency = 32768
651[ 3.422216] c0 1 socinfo_print: v0.11, id=305, ver=1.1, raw_id=95, raw_ver=1, hw_plat=1, hw_plat_ver=65536
652[ 3.422216] c0 1 accessory_chip=0, hw_plat_subtype=0, pmic_model=65545, pmic_die_revision=131072 foundry_id=3 serial_number=2834802767 num_pmics=2
653[ 3.446179] c0 1 gdsc_mmagic_bimc: no parameters
654[ _vreg: no parameters
655[ 3.455709] c0 1 reg-fixed-voltage soc:usb-otg-switch: Failed to find supply vin
656[ 3.464076] c0 1 reg-fixed-voltage soc:usb-otg-switch: Failed to register regulator: -517
657[ 3.472249] c0 1 rome_vreg: no parameters
658[ 3.478987] c0 1 SCSI subsystem initialized
659[ 3.483910] c0 1 usbcore: registered new interface driver usbfs
660[ 3.489336] c0 1 usbcore: registered new interface driver hub
661[ 3.495549] c0 1 usbcore: registered new device driver usb
662[ 3.501823] c0 1 soc:usb_nop_phy supply vcc not found, using dummy regulator
663[ 3.509659] c0 1 media: Linux media interface: v0.10
664[ 3.514794] c0 1 Linux video capture interface: v2.00
665[ 3.522082] c0 1 cpufreq: driver msm up and running
666[ 3.527868] c0 1 platform soc:qcom,ion:qcom,ion-heap@27: assigned reserved memory node qseecom_region
667[ 3.537269] c0 1 platform soc:qcom,ion:qcom,ion-heap@10: assigned reserved memory node secure_region
668[ 3.546945] c0 1 ION heap system created
669[ 3.550585] c0 1 ion_heap_create: Heap type is disabled: 1
670[ 3.556328] c0 1 msm_ion_heap_create: error creating heap kmalloc type 1 base 0x0000000000000000 size 0
671[ 3.566458] c0 1 ION heap adsp created at 0x0000000000000000 with size 2000000
672[ 3.573741] c0 1 ION heap qsecom created at 0x0000000000000000 with size 1400000
673[ 3.581551] c0 1 ION heap secure_display created at 0x0000000000000000 with size 5c00000
674[ 3.590055] c0 1 ION heap secure_heap created
675[ 3.595797] c0 1 msm_bus_fabric_init_driver
676[ 3.603540] c0 1 msm-bus-type fab-a0noc: Error: Failed to get regulator bus-gdsc:-517
677[ 3.610809] c0 1 msm-bus-type fab-a0noc: Error: Failed to get regulator bus-a-gdsc:-517
678[ 3.623171] c0 1 msm-bus-type slv-vmem-cfg: Error: Failed to get regulator node-gdsc:-517
679[ 3.631361] c0 1 msm-bus-type slv-vmem: Error: Failed to get regulator node-gdsc:-517
680[ 3.646186] c0 1 msm-bus-type fab-a0noc: Error: Failed to get regulator aggre0-snoc-axi-no-rate:-517
681[ 3.654743] c0 1 msm-bus-type fab-a0noc: Error: Failed to get regulator aggre0-snoc-axi-no-rate:-517
682[ 3.664280] c0 1 msm-bus-type fab-a0noc: Error: Failed to get regulator aggre0-snoc-axi-no-rate:-517
683[ 3.674300] c0 1 msm-bus-type fab-mnoc: Error: Failed to get regulator mmagic-mdss-axi-no-rate:-517
684[ 3.683313] c0 1 msm-bus-type fab-mnoc: Error: Failed to get regulator mmagic-mdss-axi-no-rate:-517
685[ 3.692765] c0 1 msm-bus-type fab-mnoc: Error: Failed to get regulator mmagic-mdss-axi-no-rate:-517
686[ 3.702227] c0 1 msm-bus-type fab-mnoc: Error: Failed to get regulator mmagic-mdss-axi-no-rate:-517
687[ 3.711686] c0 1 msm-bus-type fab-mnoc: Error: Failed to get regulator mmagic-mdss-axi-no-rate:-517
688[ 3.721150] c0 1 msm-bus-type fab-mnoc: Error: Failed to get regulator mmagic-mdss-axi-no-rate:-517
689[ 3.730927] c0 1 msm-bus-type fab-mnoc: Error: Failed to get regulator mmagic-mdss-axi-no-rate:-517
690[ 3.742866] c0 1 qcom,qpnp-power-on qpnp-power-on-2: PMIC@SID0 Power-on reason: Triggered from Hard Reset and 'cold' boot
691[ 3.753269] c0 1 qcom,qpnp-power-on qpnp-power-on-2: PM@SID0: Power-off reason: Triggered from PS_HOLD (PS_HOLD/MSM controlled shutdown)
692[ 3.766233] c0 1 input: qpnp_pon as /devices/virtual/in 3.773276] c0 1 pon_spare_reg: no parameters
693[ 3.777420] c0 1 qcom,qpnp-power-on qpnp-power-on-11: No PON config. specified
694[ 3.785394] c0 1 qcom,qpnp-power-on qpnp-power-on-11: PMIC@SID2 Power-on reason: Triggered from USB (USB charger insertion) and 'cold' boot
695[ 3.797943] c0 1 qcom,qpnp-power-on qpnp-power-on-11: P reason: Triggered from PS_HOLD (PS_HOLD/MSM controlled shutdown)
696[ 3.811049] c0 1 PMIC@SID0: PM8994 v2.0 options: 0, 0, , 2
697[ 3.816951] c0 1 PMIC@SID2: PMI8996 v1.1 options: 0, 0, 0, 0
698[ 3.824510] c0 1 ipa ipa2_uc_state_check:296 uC interface not initialized
699[ 3.830748] c0 1 ipa ipa_sps_irq_control_all:937 EP (2) not allocated.
700[ 3.838001] c0 1 ipa ipa_sps_irq_control_all:937 EP (5) not allocated.
701[ 3.846581] sps:BAM 0x0000000000000000 is registered.
702[ 3.851625] c0 1 ipa ipa2_uc_state_check:296 uC interface not initialized
703[ 3.858284] c0 1 sps:BAM 0x0000000000684000 (va:0xffffff80017c0000) enabled: ver:0x27, number of pipes:20
704[ 3.870021] c1 1 ipa ipa2_uc_state_check:296 uC interface not initialized
705[ 3.884940] c1 1 ipa ipa2_uc_state_check:296 uC interface not initialized
706[ 3.893953] c1 1 IPA driver initialization was successful.
707[ 3.900437] c1 1 gdsc_mmagic_video: no parameters
708[ 3.905068] c1 1 gdsc_mmagic_mdss: no parameters
709[ 3.909905] c1 1 gdsc_mmagic_camss: no parameters
710[ 3.915108] c1 1 gdsc_venus: no parameters
711[ 3.919303] c1 1 gdsc_venus: supplied by gdsc_mmagic_video
712[ 3.925425] c1 1 gdsc_venus_core0: fast normal
713[ 3.930432] c1 1 gdsc_venus_core1: fast normal
714[ 3.935387] c1 1 gdsc_camss_top: no parameters
715[ 3.939952] c1 1 gdsc_camss_top: supplied by gdsc_mmagic_camss
716[ 3.946636] c1 1 gdsc_vfe0: no parameters
717[ 3.950641] c1 1 gdsc_vfe0: supplied by gdsc_camss_top
718[ 3.956413] c1 1 gdsc_vfe1: no parameters
719[ 3.960607] c1 1 gdsc_vfe1: supplied by gdsc_camss_top
720[ 3.966394] c1 1 gdsc_mdss: no parameters
721[ 3.970587] c1 1 gdsc_mdss: supplied by gdsc_mmagic_mdss
722[ 3.976674] c1 1 gdsc_jpeg: no parameters
723[ 3.980744] c1 1 gdsc_jpeg: supplied by gdsc_camss_top
724[ 3.986545] c1 1 gdsc_cpp: no parameters
725[ 3.990636] c1 1 gdsc_cpp: supplied by gdsc_camss_top
726[ 3.996404] c1 1 gdsc_pcie_0: no parameters
727[ 4.000846] c1 1 gdsc_pcie_1: no parameters
728[ 4.005440] c1 1 gdsc_pcie_2: no parameters
729[ 4.010027] c1 1 gdsc_usb30: no parameters
730[ 4.014549] c1 1 gdsc_ufs: no parameters
731[ 4.019171] c1 1 gdsc_fd: no parameters
732[ 4.023012] c1 1 gdsc_fd: supplied by gdsc_camss_top
733[ 4.028593] c1 1 gdsc_gpu: no parameters
734[ 4.032992] c1 1 gdsc_gpu_gx: no parameters
735[ 4.037688] c1 1 gdsc_gpu_gx: supplied by gfx_corner
736[ 4.043156] c1 1 gdsc_hlos1_vote_aggre0_noc: no parameters
737[ 4.048799] c1 1 gdsc_hlos1_vote_lpass_adsp: no parameters
738[ 4.054652] c1 1 gdsc_hlos1_vote_lpass_core: no parameters
739[ 4.060561] c1 1 gdsc_aggre0_noc: no parameters
740[ 4.067922] c1 1 mdss_pll_probe: MDSS pll label = MDSS DSI 0 PLL
741[ 4.073483] c1 1 mdss_pll_probe: mdss_pll_probe: label=MDSS DSI 0 PLL PLL SSC enabled
742[ 4.084475] c1 1 dsi_pll_clock_register_8996: Registered DSI PLL ndx=0 clocks successfully
743[ 4.092393] c1 1 mdss_pll_probe: MDSS pll label = MDSS DSI 1 PLL
744[ 4.098602] c1 1 mdss_pll_probe: mdss_pll_probe: label=MDSS DSI 1 PLL PLL SSC enabled
745[ 4.108116] c1 1 pll_is_pll_locked_8996: DSI PLL ndx=1 status=0 failed to Lock
746[ 4.115334] c1 1 dsi_pll_clock_register_8996: Registered DSI PLL ndx=1 clocks successfully
747[ 4.123531] c1 1 mdss_pll_probe: MDSS pll label = MDSS HDMI PLL
748[ 4.129763] c1 1 mdss_pll_probe: Unable to get the cell-index rc=-22
749[ 4.285714] c2 1 Advanced Linux Sound Architecture Driver Initialized.
750[ 4.292405] Bluetooth: 0000000000000000
751[ 4.295307] c2 1 NET: Registered protocol family 31
752[ 4.300770] Bluetooth: 0000000000000000
753[ 4.304415] c2 1 Bluetooth: 0000000000000000Bluetooth: 0000000000000000
754[ 4.311453] c2 1 Bluetooth: 0000000000000000[ 4.316615] c2 24 cfg80211: Calling CRDA to update world regulatory domain
755[ 4.323362] c2 24 cfg80211: World regulatory domain upda[ 4.323523] c3 1 pcie:pcie_init.
756[ 4.327069] c3 1 600000.qcom,pcie supply vreg-3.3 not found, using dummy regulator
757[ 4.331267] c3 1 msm_pcie_get_resources: PCIe: RC0 can't get tcsr resource.
758[ 4.333999] c1 53 pmi8994_boost_5v: no parameters
759[ 4.334249] c1 53 pmi8994_boost_5v: supplied by pon_spare_reg
760[ 4.334647] c1 53 pmi8994_boost_pin_ctrl: no parameters
761[ 4.334781] c1 53 pmi8994_boost_pin_ctrl: supplied by pon_spare_reg
762[ 4.335344] c1 53 ibb_reg: 4600 <--> 6000 mV at 5500 mV
763[ 4.335799] c1 53 lab_reg: 4600 <--> 6000 mV at 5500 mV
764[ 4.336450] c1 53 usb_otg_vreg: no parameters
765[ 4.336562] c1 53 reg-fixed-voltage soc:usb-otg-switch: Failed to find supply vin
766[ 4.336664] c1 53 reg-fixed-voltage soc:usb-otg-switch: Failed to register regulator: -517
767[ 4.337414] c3 1 Switched to clocksource arch_sys_counter
768[ 4.364597] c3 1 bcl_peripheral:bcl_perph_init BCL Initialized
769[ 4.371535] c3 1 NET: Registered protocol family 2
770[ 4.421313] cfg80211: DFS Master region: unset
771[ 4.425591] c2 24 cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
772[ 4.436185] c2 24 cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
773[ 4.445031] c2 24 cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
774[ 4.453887] c2 24 cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A, 2000 mBm), (N/A)
775[ 4.462741] c2 24 cfg80211: (5170000 KHz - 5250000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A)
776[ 4.471596] c2 24 cfg80211: (5250000 KHz - 5330000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A)
777[ 4.480449] c2 24 cfg80211: (5490000 KHz - 5710000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A)
778[ 4.489302] c2 24 cfg80211: (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A)
779[ 4.498166] c2 24 cfg80211: (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm), (N/A)
780[ 4.507595] c3 1 TCP established hash table entries: 32768 (order: 6, 262144 bytes)
781[ 4.515264] c3 1 TCP bind hash table entries: 32768 (order: 7, 524288 bytes)
782[ 4.523015] c3 1 TCP: Hash tables configured (established 32768 bind 32768)
783[ 4.530122] c3 1 TCP: reno registered
784[ 4.534118] c3 1 UDP hash table entries: 2048 (order: 4, 65536 bytes)
785[ 4.540978] c3 1 UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
786[ 4.548638] c3 1 NET: Registered protocol family 1
787[ 4.554481] c1 60 usb_otg_vreg: no parameters
788[ 4.558343] c1 60 reg-fixed-voltage soc:usb-otg-switch: Failed to find supply vin
789[ 4.566103] c1 60 reg-fixed-voltage soc:usb-otg-switch: Failed to register regulator: -517
790[ 4.575073] c3 1 Trying to unpack rootfs image as initramfs...
791[ 4.595418] c3 1 Freeing initrd memory: 984K
792[ 4.601390] c3 1 kryo perfevents: CPU pmu for kryo-pmuv3 detected
793[ 4.612676] c2 1 futex hash table entries: 1024 (order: 5, 131072 bytes)
794[ 4.618926] c2 1 Initialise system trusted keyring
795[ 4.624773] c2 1 vmscan: error setting kswapd cpu affinity mask
796[ 4.633167] c2 1 VFS: Disk quotas dquot_6.5.2
797[ 4.637017] c2 1 Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
798[ 4.645096] c2 1 Registering sdcardfs 0.1
799[ 4.649075] c2 1 fuse init (API version 7.23)
800[ 4.653630] c2 1 msgmni has been set to 7351
801[ 4.660074] c2 1 Key type asymmetric registered
802[ 4.664028] c2 1 Asymmetric key parser 'x509' registered
803[ 4.669747] c2 1 Key type pkcs7_test registered
804[ 4.674857] c2 1 Block layer SCSI generic (bsg) driver version 0.4 loaded (major 245)
805[ 4.682951] c2 1 io scheduler noop registered
806[ 4.687715] c2 1 io scheduler deadline registered
807[ 4.692898] c2 1 io scheduler cfq registered (default)
808[ 4.698392] c2 1 io scheduler test-iosched registered
809[ 4.715846] c2 1 mdss_mdp_irq_clk_register: unable to get clk: lut_clk
810[ 4.723136] c2 1 No change in context(0==0), skip
811[ 4.728299] c2 1 mdss_mdp_pipe_addr_setup: type:0 ftchid:-1 xinid:0 num:0 rect:0 ndx:0x1 prio:0
812[ 4.736403] c2 1 mdss_mdp_pipe_addr_setup: type:0 ftchid:-1 xinid:4 num:1 rect:0 ndx:0x2 prio:1
813[ 4.745512] c2 1 mdss_mdp_pipe_addr_setup: type:0 ftchid:-1 xinid:8 num:2 rect:0 ndx:0x4 prio:2
814[ 4.754625] c2 1 mdss_mdp_pipe_addr_setup: type:0 ftchid:-1 xinid:12 num:8 rect:0 ndx:0x100 prio:3
815[ 4.764010] c2 1 mdss_mdp_pipe_addr_setup: type:1 ftchid:-1 xinid:1 num:3 rect:0 ndx:0x8 prio:4
816[ 4.773113] c2 1 mdss_mdp_pipe_addr_setup: type:1 ftchid:-1 xinid:5 num:4 rect:0 ndx:0x10 prio:5
817[ 4.782313] c2 1 mdss_mdp_pipe_addr_setup: type:1 ftchid:-1 xinid:9 num:5 rect:0 ndx:0x20 prio:6
818[ 4.791515] c2 1 mdss_mdp_pipe_addr_setup: type:1 ftchid:-1 xinid:13 num:9 rect:0 ndx:0x200 prio:7
819[ 4.800901] c2 1 mdss_mdp_pipe_addr_setup: type:2 ftchid:-1 xinid:2 num:6 rect:0 ndx:0x40 prio:8
820[ 4.810092] c2 1 mdss_mdp_pipe_addr_setup: type:2 ftchid:-1 xinid:10 num:7 rect:0 ndx:0x80 prio:9
821[ 4.819386] c2 1 mdss_mdp_pipe_addr_setup: type:3 ftchid:-1 xinid:7 num:10 rect:0 ndx:0x400 prio:0
822[ 4.828755] c2 1 mdss_mdp_pipe_addr_setup: type:3 ftchid:-1 xinid:7 num:11 rect:0 ndx:0x800 prio:1
823[ 4.838132] c2 1 mdss_mdp_parse_dt_handler: Error from prop qcom,mdss-pipe-sw-reset-off : u32 array read
824[ 4.848074] c2 1 mdss_mdp_parse_dt_handler: Error from prop qcom,mdss-ib-factor-overlap : u32 array read
825[ 4.858372] c2 1 xlog_status: enable:1, panic:1, dump:2
826[ 4.863794] c2 1 OF: no ranges; cannot translate
827[ 4.868608] c2 1 OF: no ranges; cannot translate
828[ 4.874349] c2 1 OF: no ranges; cannot translate
829[ 4.878680] c2 1 OF: no ranges; cannot translate
830[ 4.883827] c2 1 OF: no ranges; cannot translate
831[ 4.888744] c2 1 OF: no ranges; cannot translate
832[ 4.893912] c2 1 OF: no ranges; cannot translate
833[ 4.898816] c2 1 OF: no ranges; cannot translate
834[ 4.904016] c2 1 mdss_mdp_probe: mdss version = 0x10070002, bootloader display is on, num 1, intf_sel=0x00010100
835[ 4.916035] c2 1 mdss_rotator_init_queue: work thread name=rot_thread_0
836[ 4.922315] c2 1 mdss_rotator_init_queue: work thread name=rot_thread_1
837[ 4.932706] c2 1 mdss_smmu_probe: iommu v2 domain[0] mapping and clk register successful!
838[ 4.940432] c2 1 mdss_smmu_probe: iommu v2 domain[1] mapping and clk register successful!
839[ 4.949003] c2 1 mdss_smmu_probe: iommu v2 domain[2] mapping and clk register successful!
840[ 4.957575] c2 1 mdss_smmu_probe: iommu v2 domain[3] mapping and clk register successful!
841[ 4.968969] c2 1 mdss_dsi_ctrl_probe: DSI Ctrl name = MDSS DSI CTRL->0
842[ 4.975154] c2 1 mdss_dsi_find_panel_of_node: cmdline:0:qcom,mdss_dsi_samsung_s6e3ha3_wqhd_cmd:1:qcom,mdss_dsi_samsung_s6e3ha3_wqhd_cmd:cfg:split_dsi panel_name:qcom,mdss_dsi_samsung_s6e3ha3_wqhd_cmd
843[ 4.993064] c2 1 mdss_dsi_panel_init: Panel Name = M1 Wpanel_timing_from_dt: found new timing "qcom,mdss_dsi_samsung_s6e3ha3_wqhd_cmd" (0000000000000000)
844[ 5.013974] c2 1 mdss_dsi_parse_dcs_cmds: failed, key=qd
845[ 5.022567] c2 1 mdss_dsi_parse_dcs_cmds: failed, key=qcom,mdss-dsi-timing-switch-command
846[ 5.031151] c2 1 mdss_dsi_panel_get_dsc_cfg_np: cannot find dsc config node:
847[ 5.038661] c2 1 mdss_dsi_parse_panel_features: partial_update_enabled=0
848[ 5.045742] c2 1 mdss_dsi_parse_panel_features: ulps feature disabled
849[ 5.052594] mdss_dsi_parse_panel_features: ulps during suspend feature disabled
850[ 5.059711] c2 1 mdss_dsi_parse_dms_config: dynamic switch feature enabled: 0
851[ 5.067440] c2 1 mdss_dsi_parse_dcs_cmds: failed, key=qcom,mdss-dsi-panel-status-command
852[ 5.075977] c2 1 mdss_dsi_parse_rgb_gain: PA[0] = 0x0
853[ 5.081410] c2 1 mdss_dsi_parse_rgb_gain: PA[1] = 0x0
854[ 5.086878] c2 1 mdss_dsi_parse_rgb_gain: PA[2] = 0x0
855[ 5.092347] c2 1 mdss_dsi_parse_rgb_gain: PA[3] = 0x0
856[ 5.097816] c2 1 mdss_dsi_parse_rgb_gain: R = 0x0, G = 0x0 B = 0x0
857[ 5.104646] c2 1 mdss_dsi_parse_ctrl_params:3904 Unable to read qcom,display-id, data=0000000000000000,len=20
858[ 5.114898] c2 1 mdss_dsi_parse_gpio_params: bklt_en gpio not specified
859[ 5.121900] c2 1 msm_dss_get_res_byname: 'dsi_phy_regulator' resource not found
860[ 5.129605] c2 1 mdss_dsi_retrieve_ctrl_resources+0xc4/0x228->msm_dss_ioremap_byname: 'dsi_phy_regulator' msm_dss_get_res_byname failed
861[ 5.142175] c2 1 mdss_dsi_retrieve_ctrl_resources: ctrl0000000 ctrl_size=400 phy_base=0000000000000000 phy_size=588
862[ 5.154542] c2 1 dsi_panel_device_register: Continuous splash enabled
863[ 5.161790] c2 1 mdss_register_panel: adding framebuffer device 994000.qcom,mdss_dsi_ctrl0
864[ 5.192034] c2 1 ERR_FG request IRQ
865[ 5.195202] c2 1 mdss_dsi_ctrl_probe: Dsi Ctrl->0 initialized, DSI rev:0x10040001, PHY rev:0x2
866[ 5.204650] c2 1 mdss_dsi_ctrl_probe: DSI Ctrl name = MDSS DSI CTRL->1
867[ 5.211146] c2 1 mdss_dsi_find_panel_of_node: cmdline:0:qcom,mdss_dsi_samsung_s6e3ha3_wqhd_cmd:1:qcom,mdss_dsi_samsung_s6e3ha3_wqhd_cmd:cfg:split_dsi panel_name:qcom,mdss_dsi_samsung_s6e3ha3_wqhd_cmd
868[ 5.229050] c2 1 mdss_dsi_panel_init: Panel Name = M1 Wpanel_timing_from_dt: found new timing "qcom,mdss_dsi_samsung_s6e3ha3_wqhd_cmd" (0000000000000000)
869[ 5.249968] c2 1 mdss_dsi_parse_dcs_cmds: failed, key=qd
870[ 5.258551] c2 1 mdss_dsi_parse_dcs_cmds: failed, key=qcom,mdss-dsi-timing-switch-command
871[ 5.267196] c2 1 mdss_dsi_parse_panel_features: partial_update_enabled=0
872[ 5.274264] c2 1 mdss_dsi_parse_panel_features: ulps feature disabled
873[ 5.281120] mdss_dsi_parse_panel_features: ulps during suspend feature disabled
874[ 5.288247] c2 1 mdss_dsi_parse_dms_config: dynamic switch feature enabled: 0
875[ 5.295967] c2 1 mdss_dsi_parse_dcs_cmds: failed, key=qcom,mdss-dsi-panel-status-command
876[ 5.304503] c2 1 mdss_dsi_parse_rgb_gain: PA[0] = 0x0
877[ 5.309937] c2 1 mdss_dsi_parse_rgb_gain: PA[1] = 0x0
878[ 5.315406] c2 1 mdss_dsi_parse_rgb_gain: PA[2] = 0x0
879[ 5.320875] c2 1 mdss_dsi_parse_rgb_gain: PA[3] = 0x0
880[ 5.326344] c2 1 mdss_dsi_parse_rgb_gain: R = 0x0, G = 0x0 B = 0x0
881[ 5.333190] c2 1 mdss_dsi_parse_ctrl_params:3904 Unable to read qcom,display-id, data=0000000000000000,len=20
882[ 5.343429] c2 1 mdss_dsi_parse_gpio_params: bklt_en gpio not specified
883[ 5.350427] c2 1 msm_dss_get_res_byname: 'dsi_phy_regulator' resource not found
884[ 5.358131] c2 1 mdss_dsi_retrieve_ctrl_resources+0xc4/0x228->msm_dss_ioremap_byname: 'dsi_phy_regulator' msm_dss_get_res_byname failed
885[ 5.370702] c2 1 mdss_dsi_retrieve_ctrl_resources: ctrl0000000 ctrl_size=400 phy_base=0000000000000000 phy_size=558
886[ 5.382870] c2 1 dsi_panel_device_register: Continuous splash enabled
887[ 5.390339] c2 1 panel_debug_register_base: debugfs_create_file: data_type fail
888[ 5.397857] c2 1 mdss_dsi_ctrl_probe: Dsi Ctrl->1 initialized, DSI rev:0x10040001, PHY rev:0x2
889[ 5.407828] c2 1 mdss_dsi_status_init: DSI status check interval:3000
890[ 5.414076] c2 1 msm8996-pinctrl 1010000.pinctrl: could not parse property pins
891[ 5.421482] c2 1 hdmi_tx_get_dt_data:4355 Unable to read qcom,display-id, data=0000000000000000,len=0
892[ 5.431061] c2 1 msm8996-pinctrl 1010000.pinctrl: could not parse property pins
893[ 5.438759] c2 1 hdmi_tx_pinctrl_init: failed to get pinctrl
894[ 5.444848] c2 1 hdmi_tx_init_resource: 'core_physical': start = 0x0000000000000000, len=0x50c
895[ 5.453867] c2 1 hdmi_tx_init_resource: 'qfprom_physical': start = 0x0000000000000000, len=0x6158
896[ 5.463239] c2 1 hdmi_tx_init_resource: 'hdcp_physical': start = 0x0000000000000000, len=0xfff
897[ 5.473175] c2 1 mdss_register_panel: adding framebuffer device 9a0000.qcom,hdmi_tx
898[ 5.482539] c2 1 mdss_register_panel: adding framebuffer device soc:qcom,mdss_wb_panel
899[ 5.491845] c2 1 mdss_fb_probe: fb0: split_mode:2 left:720 right:720
900[ 5.498400] c2 1 mdss_fb_register: FrameBuffer[0] 1440x2560 registered successfully!
901[ 5.506982] c2 1 mdss_fb_probe: fb1: split_mode:0 left:0 right:0
902[ 5.512552] c2 1 mdss_fb_register: FrameBuffer[1] 640x480 registered successfully!
903[ 5.520700] c2 1 input: HDMI CEC User or Deck Control as /devices/virtual/input/input1
904[ 5.532776] c2 1 mdss_fb_probe: fb2: split_mode:0 left:0 right:0
905[ 5.538461] c2 1 mdss_fb_register: FrameBuffer[2] 640x480 registered successfully!
906[ 5.546240] c2 1 mdss_mdp_splash_parse_dt: splash mem child node is not present
907[ 5.556816] c2 1 scm_call failed: func id 0x42000c23, ret: -2, syscall returns: 0xfffffffffffffff0, 0x0, 0x0
908[ 5.566090] c2 1 msm-dcc 4b3000.dcc: Falied to unlock DCC XPU.
909[ 5.572323] c2 1 msm-dcc: probe of 4b3000.dcc failed with error -22
910[ 5.593281] c3 1 In memshare_probe, Memshare probe success
911[ 5.600071] c3 1 msm_rpmstats_probe: ERROR rpm_stats debugfs_create_file fail
912[ 5.606659] c3 1 msm_rpm_stat: probe of 2a1fa0.qcom,rpm-stats failed with error -12
913[ 5.619003] c3 1 l2cache-pmu soc:l2-pmu: Registered L2 cache PMU using 2 HW PMUs
914[ 5.626779] c3 1 msm_rpm_log_probe: OK
915[ 5.631183] c3 1 RPM Version: 148.0.5
916[ 5.637896] c3 1 subsys-pil-tz ce0000.qcom,venus: for venus segments only will be dumped.
917[ 5.646595] c3 1 subsys-pil-tz soc:qcom,kgsl-hyp: for a530_zap_signed segments only will be dumped.
918[ 5.658142] c3 1 pil-q6v5-mss 2080000.qcom,mss: Failed to find the pas_id.
919[ 5.667743] c3 1 uart_tx_gpio is not available
920[ 5.671647] c3 1 uart_rx_gpio is not available
921[ 5.676459] c3 1 uart_cts_gpio is not available
922[ 5.681409] c3 1 uart_rfr_gpio is not available
923[ 5.687295] c3 1 sps: BAM device 0x0000000000000000 is not registered yet.
924[ 5.693790] sps:BAM 0x0000000000000000 is registered.
925[ 5.700102] c3 1 7570000.uart: ttyHS0 at MMIO 0x7570000 (irq = 18, base_baud = 460800) is a MSM HS UART
926[ 5.711467] c3 1 msm_serial_hs module loaded
927[ 5.716019] c3 1 msm_serial_hsl_probe: detected port #0 (ttyHSL0)
928[ 5.721694] c3 1 AXI: get_pdata(): Error: Client name not found
929[ 5.727987] c3 1 AXI: msm_bus_cl_get_pdata(): client has to provide missing entry for successful registration
930[ 5.738317] c3 1 msm_serial_hsl_probe: Bus scaling is disabled
931[ 5.744678] c3 1 75b0000.serial: ttyHSL0 at MMIO 0x75b0000 (irq = 12, base_baud = 460800⸮[ 5.754016] c3 1 msm_hsl_console_setup: console setup on port #0
932[ 5.759478] c3 1 console [ttyHSL0] enabled
933[ 5.7594[ 5.768447] c3 1 bootconsole [uart0] disabled
934[ 5.768447] c3 1 bootconsole [uart0] disabled
935[ 5.779210] c3 1 msm_serial_hsl_init: driver initialized
936[ 5.797561] c3 1 kgsl: use zap firmware : a530_zap_signed
937[ 5.842317] c3 1 brd: module loaded
938[ 5.846639] c3 1 loop: module loaded
939[ 5.849832] c3 1 zram: Created 1 device(s) ...
940[ 5.855594] c3 1 QSEECOM: qseecom_probe: qseecom.qsee_version = 0x1000000
941[ 5.861824] QSEECOM: qseecom_retrieve_ce_data: Device does not support PFE
942[ 5.868473] c3 1 QSEECOM: qseecom_probe: no-clock-support=0x1[ 5.874635] c3 1 QSEECOM: qseecom_probe: qseecom.qsee_reentrancy_support = 2
943[ 5.882560] c3 1 QSEECOM: qseecom_probe: qseecom.whitel[ 5.893473] c3 1 fpc1020 soc:fp_fpc1020: found pin control fpc1020_reset_active
944[ 5.900220] c3 1 fpc1020 soc:fp_fpc1020: found pin contt
945[ 5.907838] c3 1 fpc1020 soc:fp_fpc1020: found pin control fpc1020_irq_active
946[ 5.915416] c3 1 fpc1020 soc:fp_fpc1020: Selected 'fpc1020_reset_reset'
947[ 5.922427] c3 1 fpc1020 soc:fp_fpc1020: Selected 'fpc1020_irq_active'
948[ 5.929661] c3 1 fpc1020 soc:fp_fpc1020: fpc1020_probe: ok
949[ 5.937052] c3 1 i2c-core: driver [tabla-i2c-core] using legacy suspend method
950[ 5.943739] c3 1 i2c-core: driver [tabla-i2c-core] using legacy resume method
951[ 5.951284] c3 1 i2c-core: driver [wcd9xxx-i2c-core] using legacy suspend method
952[ 5.959052] c3 1 i2c-core: driver [wcd9xxx-i2c-core] using legacy resume method
953[ 5.966813] c3 1 i2c-core: driver [tasha-i2c-core] using legacy suspend method
954[ 5.974423] c3 1 i2c-core: driver [tasha-i2c-core] using legacy resume method
955[ 5.983648] c3 1 [NFC] pn551_dev_init: Loading pn551 driver
956[ 5.988750] c3 1 [NFC] pn551_probe:
957[ 5.992652] c3 1 [NFC] pn551_probe : vreg_l6 regulator_get
958[ 5.998456] c3 1 [NFC] pn551_probe : vreg_l6 regulator_set_voltage
959[ 6.005040] c3 1 [NFC] pn551_probe : vreg_l6 regulator_enable
960[ 6.011199] c3 1 [NFC] pn551_probe : vreg_l6 regulator_is_enabled = 1
961[ 6.018057] c3 1 [NFC] pn551_parse_dt: Start
962[ 6.022745] [NFC] pn551_parse_dt:ven_isinvert = 0
963[ 6.027255] c3 1 [NFC] pn551_parse_dt: chk irq-gpio
964[ 6.032911] c3 1 [NFC] pn551_parse_dt: chk ven-gpio
965[ 6.038037] c3 1 [NFC] pn551_parse_dt: chk fwdl-gpio
966[ 6.043417] c3 1 [NFC] pn551_parse_dt: chk nfc_i2c pins
967[ 6.049090] c3 1 [NFC] pn551_parse_dt: End, irq_gpio:50, ven_gpio:12, firm_gpio:74
968[ 6.057047] c3 1 [NFC] pn551_probe : irq_gpio:50, ven_gpio:12, firm_gpio:74, ven_enable:1
969[ 6.065631] c3 1 [NFC] pn551_probe : irq_gpio set input 0
970[ 6.071533] c3 1 [NFC] pn551_probe : ven_gpio set 0 0
971[ 6.077087] c3 1 [NFC] pn551_probe : firm_gpio set 0 0
972[ 6.082726] c3 1 [NFC] pn551_probe: init io_wake_lock
973[ 6.088381] c3 1 [NFC] pn551_probe : requesting IRQ 405
974[ 6.093967] c3 1 [NFC] pn551_probe: Turn off NFC VEN by default
975[ 6.100175] c3 1 [NFC] pn551_Disable: gpio=12 set_value=0
976[ 6.106001] c3 1 [NFC] pn551_Disable: [NFC] gpio=12 check ven_gpio value=0
977[ 6.113278] c3 1 [NFC] pn551_probe: Probe success!
978[ 6.118503] c3 1 i2c-core: driver [pn551] using legacy suspend method
979[ 6.125347] c3 1 i2c-core: driver [pn551] using legacy resume method
980[ 6.133359] c3 1 qce 660000.qcedev: Qualcomm Crypto 5.3.1 device found @0x660000
981[ 6.140225] c3 1 qce 660000.qcedev: CE device = 0x0
982[ 6.140225] c3 1 , IO base, CE = 0x0000000000000000
983[ 6.140225] c3 1 , Consumer (IN) PIPE 2, Producer (OUT) PIPE 3
984[ 6.140225] c3 1 IO base BAM = 0x0000000000000000
985[ 6.140225] c3 1 BAM IRQ 247
986[ 6.140225] c3 1 Engines Availability = 0x2011053
987[ 6.170978] sps:BAM 0x0000000000000000 is registered.
988[ 6.175922] c3 1 sps:BAM 0x0000000000644000 (va:0xffffff80036c0000) enabled: ver:0x27, number of pipes:16
989[ 6.186054] c3 1 QCE50: qce_sps_init: Qualcomm MSM CE-BAM at 0x0000000000644000 irq 247
990[ 6.200492] c3 1 qcrypto 660000.qcrypto: Qualcomm Crypto 5.3.1 device found @0x660000
991[ 6.207821] c3 1 qcrypto 660000.qcrypto: CE device = 0x0
992[ 6.207821] c3 1 , IO base, CE = 0x0000000000000000
993[ 6.207821] c3 1 , Consumer (IN) PIPE 4, Producer (OUT) PIPE 5
994[ 6.207821] c3 1 IO base BAM = 0x0000000000000000
995[ 6.207821] c3 1 BAM IRQ 247
996[ 6.207821] c3 1 Engines Availability = 0x2011053
997[ 6.239179] c3 1 QCE50: qce_sps_init: Qualcomm MSM CE-BAM at 0x0000000000644000 irq 247
998[ 6.250752] c3 1 qcrypto 660000.qcrypto: qcrypto-ecb-aes
999[ 6.255564] c3 1 qcrypto 660000.qcrypto: qcrypto-cbc-aes
1000[ 6.261280] c3 1 qcrypto 660000.qcrypto: qcrypto-ctr-aes
1001[ 6.267006] c3 1 qcrypto 660000.qcrypto: qcrypto-ecb-des
1002[ 6.272737] c3 1 qcrypto 660000.qcrypto: qcrypto-cbc-des
1003[ 6.278468] c3 1 qcrypto 660000.qcrypto: qcrypto-ecb-3des
1004[ 6.284314] c3 1 qcrypto 660000.qcrypto: qcrypto-cbc-3des
1005[ 6.290103] c3 1 qcrypto 660000.qcrypto: qcrypto-xts-aes
1006[ 6.295828] c3 1 qcrypto 660000.qcrypto: qcrypto-sha1
1007[ 6.301301] c3 1 qcrypto 660000.qcrypto: qcrypto-sha256
1008[ 6.306967] c3 1 qcrypto 660000.qcrypto: qcrypto-aead-hmac-sha1-cbc-aes
1009[ 6.313990] c3 1 qcrypto 660000.qcrypto: qcrypto-aead-hmac-sha1-cbc-des
1010[ 6.321004] c3 1 qcrypto 660000.qcrypto: qcrypto-aead-hmac-sha1-cbc-3des
1011[ 6.328153] c3 1 qcrypto 660000.qcrypto: qcrypto-aead-hmac-sha256-cbc-aes
1012[ 6.335344] c3 1 qcrypto 660000.qcrypto: qcrypto-aead-hmac-sha256-cbc-des
1013[ 6.342554] c3 1 qcrypto 660000.qcrypto: qcrypto-aead-hmac-sha256-cbc-3des
1014[ 6.349833] c3 1 qcrypto 660000.qcrypto: qcrypto-hmac-sha1
1015[ 6.355744] c3 1 qcrypto 660000.qcrypto: qcrypto-hmac-sha256
1016[ 6.361804] c3 1 qcrypto 660000.qcrypto: qcrypto-aes-ccm
1017[ 6.367533] c3 1 qcrypto 660000.qcrypto: qcrypto-rfc4309-aes-ccm
1018[ 6.376744] c3 1 ICE IRQ = 30
1019[ 6.379415] c3 1 qcom_ice_get_device_tree_data: No vdd-hba-supply regulator, assuming not needed
1020[ 6.388370] c3 1 ICE IRQ = 31
1021[ 6.396482] c3 1 qcom_ice_get_pdevice: found ice device 0000000000000000
1022[ 6.402621] c3 1 qcom_ice_get_pdevice: matching platform device 0000000000000000
1023[ 6.411015] c3 1 scm_call failed: func id 0x42000c02, ret: -2, syscall returns: 0xfffffffffffffffc, 0x0, 0x0
1024[ 6.421254] c3 1 ufs_qcom_phy_qmp_14nm 627000.ufsphy: failed to get tx_iface_clk err -2
1025[ 6.429078] c3 1 ufs_qcom_phy_qmp_14nm 627000.ufsphy: failed to get rx_iface_clk err -2
1026[ 6.438439] c3 1 scsi host0: ufshcd
1027[ 6.445020] c3 1 qcom_ice 630000.ufsice: QC ICE 2.1.44 device found @0x0000000000000000
1028[ 6.462693] c3 1 msm8996-pinctrl 1010000.pinctrl: could not parse property pins
1029[ 6.471542] c3 1 spi_master spi6: will run message pump with realtime priority
1030[ 6.478281] c2 60 ufshcd 624000.ufshc: ufshcd_print_pwr_info:[RX, TX]: gear=[1, 1], lane[1, 1], pwr[SLOWAUTO_MODE, SLOWAUTO_MODE], rate = 0
1031[ 6.483671] c3 1 sps:BAM 0x0000000007544000 (va:0xfffffed: ver:0x19, number of pipes:24
1032[ 6.484388] c3 1 Ethernet Channel Bonding Driver: v3.7.1 (April 27, 2011)
1033[ 6.485320] c3 1 tun: Universal TUN/TAP device driver, 1.6
1034[ 6.485321] c3 1 tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
1035[ 6.485487] c3 1 PPP generic driver version 2.4.2
1036[ 6.485643] c3 1 PPP BSD Compression module registered
1037[ 6.485646] c3 1 PPP Deflate Compression module registered
1038[ 6.485674] c3 1 PPP MPPE Compression module registered
1039[ 6.485681] c3 1 NET: Registered protocol family 24
1040[ 6.518894] c3 1 msm_pcie_enable: PCIe: Assert the reset of endpoint of RC0.
1041[ 6.522539] c3 1 msm_pcie_enable: PCIe RC0 PHY is ready!
1042[ 6.532628] c3 1 msm_pcie_enable: PCIe: Release the reset of endpoint of RC0.
1043[ 6.574587] c3 1 msm_pcie_enable: PCIe RC0 link initialized
1044[ 6.579668] c3 1 PCI host bridge /soc/qcom,pcie@00600000 ranges:
1045[ 6.585996] c3 1 No bus range found for /soc/qcom,pcie@00600000, using [bus 00-ff]
1046[ 6.594165] c3 1 IO 0x0c200000..0x0c2fffff -> 0x0c200000
1047[ 6.600142] c3 1 MEM 0x0c300000..0x0cffffff -> 0x0c300000
1048[ 6.616268] c3 1 pci-msm 600000.qcom,pcie: PCI host bridge to bus 0000:00
1049[ 6.622462] c3 1 pci_bus 0000:00: root bus resource [bus 00-ff]
1050[ 6.628794] c3 1 pci_bus 0000:00: root bus resource [io 0x0000-0xfffff] (bus address [0xc200000-0xc2fffff])
1051[ 6.639035] c3 1 pci_bus 0000:00: root bus resource [mem 0x00000000-0x00cfffff]
1052[ 6.646894] c3 1 msm_pcie_oper_conf: Read of RC0 0:0x00 + 0x0014[4] is all FFs
1053[ 6.654456] c3 1 pci 0000:00:00.0: IOMMU is currently not supported for PCI
1054[ 6.661884] c3 1 pci 0000:00:00.0: of_irq_parse_pci() failed with rc=-19
1055[ 6.669075] c3 1 pci 0000:00:00.0: bridge configuration invalid ([bus 00-00]), reconfiguring
1056[ 6.678069] c3 1 msm_pcie_oper_conf: Read of RC0 1:0x00 + 0x0014[4] is all FFs
1057[ 6.685546] c3 1 pci 0000:01:00.0: IOMMU is currently not supported for PCI
1058[ 6.693446] c3 1 msm_pcie_oper_conf: Read of RC0 0:0x00 + 0x0028[4] is all FFs
1059[ 6.700433] c3 1 pci 0000:00:00.0: BAR 8: assigned [mem 0x00000000-0x001fffff]
1060[ 6.708050] c3 1 pci 0000:00:00.0: BAR 0: assigned [mem 0x00000000-0x00000fff 64bit]
1061[ 6.716296] c3 1 pci 0000:01:00.0: BAR 0: assigned [mem 0x00000000-0x001fffff 64bit]
1062[ 6.724692] c3 1 pci 0000:00:00.0: PCI bridge to [bus 00]
1063[ 6.730254] c3 1 pci 0000:00:00.0: bridge window [mem 0x00000000-0x001fffff]
1064[ 6.739500] c3 1 cnss soc:qcom,cnss: for AR6320 segments only will be dumped.
1065[ 6.757947] c3 1 msm_pcie_disable: PCIe: Assert the reset of endpoint of RC0.
1066[ 6.766869] c3 1 cnss: Platform driver probed successfully.
1067[ 6.773066] c3 1 CLD80211: Initializing
1068[ 6.776460] c3 1 usbcore: registered new interface driver rtl8150
1069[ 6.782836] c3 1 usbcore: registered new interface driver r8152
1070[ 6.789182] c3 1 usbcore: registered new interface driver asix
1071[ 6.795422] c3 1 usbcore: registered new interface driver ax88179_178a
1072[ 6.802368] c3 1 usbcore: registered new interface driver cdc_ether
1073[ 6.809310] c3 1 usbcore: registered new interface driver cdc_ncm
1074[ 6.816114] c3 107 msm_sharedmem: sharedmem_register_qmi: qmi init successful
1075[ 6.817691] c2 60 ufshcd 624000.ufshc: ufshcd_print_pwr_info:[RX, TX]: gear=[3, 3], lane[1, 1], pwr[FAST MODE, FAST MODE], rate = 2
1076[ 6.818287] c2 60 scsi 0:0:0:49488: Well-known LUN SABG4G1CE-B0B1 0800 PQ: 0 ANSI: 6
1077[ 6.819236] c2 60 scsi 0:0:0:49456: Well-known LUN SAMSUNG KLUBG4G1CE-B0B1 0800 PQ: 0 ANSI: 6
1078[ 6.819899] c2 60 scsi 0:0:0:49476: Well-known LUN SAMSUNG KLUBG4G1CE-B0B1 0800 PQ: 0 ANSI: 6
1079[ 6.820695] c1 273 scsi 0:0:0:0: Direct-Access SAMSUNG KLUBG4G1CE-B0B1 0800 PQ: 0 ANSI: 6
1080[ 6.821476] c1 273 scsi 0:0:0:1: Direct-Access SAMSUNG KLUBG4G1CE-B0B1 0800 PQ: 0 ANSI: 6
1081[ 6.821966] c1 273 scsi 0:0:0:2: Direct-Access SAMSUNG KLUBG4G1CE-B0B1 0800 PQ: 0 ANSI: 6
1082[ 6.822536] c1 273 scsi 0:0:0:3: Direct-Access SAMSUNG KLUBG4G1CE-B0B1 0800 PQ: 0 ANSI: 6
1083[ 6.823057] c1 273 scsi 0:0:0:4: Direct-Access SAMSUNG KLUBG4G1CE-B0B1 0800 PQ: 0 ANSI: 6
1084[ 6.823546] c1 273 scsi 0:0:0:5: Direct-Access SAMSUNG KLUBG4G1CE-B0B1 0800 PQ: 0 ANSI: 6
1085[ 6.824537] c0 60 sd 0:0:0:0: [sda] 16384-byte physical blocks
1086[ 6.825123] c0 59 sd 0:0:0:1: [sdb] 16384-byte physical blocks
1087[ 6.827455] c1 273 sd 0:0:0:2: [sdc] 16384-byte physical blocks
1088[ 6.829500] c1 274 sd 0:0:0:4: [sde] 16384-byte physical blocks
1089[ 6.829503] c0 53 sd 0:0:0:3: [sdd] 16384-byte physical blocks
1090[ 6.831758] c1 59 sdb: sdb1
1091[ 6.832940] c0 60 sda: sda1 sda2 sda3 sda4 sda5 sda6 sda7 sda8 sda9 sda10 sda11 sda12 sda13 sda14 sda15 sda16 sda17 sda18 sda19 sda20 sda21 sda22 sda23 sda24 sda25 sda26 sda27 sda28 sda29 sda30 sda31 sda32 sda33 sda34 sda35 sda36
1092[ 6.833563] c0 275 sd 0:0:0:5: [sdf] 16384-byte physical
1093[ 6.838503] c0 273 sdc: sdc1
1094[ 6.839675] c2 1 msm_sharedmem: msm_sharedmem_probe: Device created for client 'rmtfs'
1095[ 6.840020] c0 274 sde: sde1 sde2 sde3 sde4 sde5 sde6
1096[ 6.842615] c0 275 sdf: sdf1 sdf2 sdf3 sdf4 sdf5
1097[ 6.842651] c2 1 rtel: rtel_probe: Device created for client 'rtel'
1098[ 6.849315] c2 1 msm-dwc3 6a00000.ssusb: unable to get dbm device
1099[ 6.852748] c2 1 usbcore: registered new interface driver usb-storage
1100[ 6.852838] c2 1 usbcore: registered new interface driver usbserial
1101[ 6.852861] c2 1 usbcore: registered new interface driver usb_ehset_test
1102[ 6.853636] c2 1 gbridge_init: gbridge_init successs.
1103[ 6.855510] c2 1 9-0022 supply vbus not found, using dummy regulator
1104[ 6.856391] c2 1 i2c-msm-v2 75b7000.i2c: msm_bus_scale_register_client(mstr-id:84):0x13 (ok)
1105[ 6.860417] c2 1 mousedev: PS/2 mouse device common for all mice
1106[ 6.860680] c2 1 usbcore: registered new interface driver xpad
1107[ 6.861526] c2 1 [TP]: parse_config
1108[ 6.896202] c0 1 i2c-msm-v2 7577000.i2c: msm_bus_scale_register_client(mstr-id:86):0x14 (ok)
1109[ 6.897629] c0 1 [TP]:check_chip_exist: Synaptics chip exist
1110[ 6.907948] c0 1 [TP]:synaptics_rmi4_f12_init: Function 12 max x = 1439 max y = 2559 Rx: 17 Tx: 30
1111[ 6.908579] c0 1 [TP]synaptics_rmi4_f12_init:Wakeup Gesture range (0,0) -> (1439,2559)
1112[ 6.908829] c0 1 [TP]:synaptics_rmi4_f12_init report data init done
1113[ 6.916829] c1 1 [TP]:synaptics_rmi4_query_device: chip_id:3708, firmware_id:2433782
1114[ 6.917749] c1 1 [TP]:synaptics_rmi4_query_device: config_version: 4d31763200180000000000000000000000000000000000000000000000000000
1115[ 6.918240] c1 1 input: synaptics_dsxv26 as /devices/so2c/i2c-3/3-0020/input/input2
1116[ 6.918665] c1 1 [TP]: [ERR]:synaptics_rmi4_irq_enable: Interrupt already enabled
1117[ 6.920047] c1 1 [LASER] stmvl53l0_init: Enter
1118[ 6.920051] c1 1 [LASER] stmvl53l0_init_i2c: Enter
1119[ 6.920736] c1 1 [LASER] stmvl53l0_probe: Enter++
1120[ 6.920872] c1 1 [LASER] Laser_parse_dt: pwdn_gpio = 94
1121[ 6.921035] c1 1 [LASER] Laser_parse_dt: laser_irq_gpio = 62
1122[ 6.921052] c1 1 [LASER] Laser_parse_dt: Laser_parse_dt: sensor cali_size = 768
1123[ 6.921056] c1 1 [LASER] Laser_parse_dt: gyro sensor cali_data[100] = 67
1124[ 6.921057] c1 1 [LASER] Laser_parse_dt: gyro sensor cali_data[101] = 00
1125[ 6.921059] c1 1 [LASER] Laser_parse_dt: gyro sensor cali_data[102] = 05
1126[ 6.921060] c1 1 [LASER] Laser_parse_dt: gyro sensor cali_data[103] = 17
1127[ 6.921061] c1 1 [LASER] Laser_parse_dt: gyro sensor cali_data[104] = 67
1128[ 6.921063] c1 1 [LASER] Laser_parse_dt: gyro sensor cali_data[105] = 00
1129[ 6.921064] c1 1 [LASER] Laser_parse_dt: gyro sensor cali_data[106] = 03
1130[ 6.921065] c1 1 [LASER] Laser_parse_dt: gyro sensor cali_data[107] = 00
1131[ 6.921067] c1 1 [LASER] Laser_parse_dt: Laser_parse_dt: Update offset_kvalue = 23
1132[ 6.921069] c1 1 [LASER] Laser_parse_dt: Laser_parse_dt: Update xtalk_kvalue = 0x3
1133[ 6.921070] c1 1 [LASER] Laser_parse_dt: Update SpadCount = 5 and IsAperture = 0
1134[ 6.921072] c1 1 [LASER] stmvl53l0_parse_vdd: Enter++
1135[ 6.921130] c1 1 12-0029 supply vdd not found, using dummy regulator
1136[ 6.921176] c1 1 [LASER] stmvl53l0_parse_vdd: End--
1137[ 6.921177] c1 1 [LASER] Laser_pinctrl_init: Enter++
1138[ 6.921752] c1 1 [LASER] Laser_pinctrl_init: End--
1139[ 6.921756] c1 1 [LASER] stmvl53l0_setup: Enter++
1140[ 6.921774] c1 1 [LASER] stmvl53l0_setup: register_irq: 417
1141[ 6.922147] c1 1 [LASER] stmvl53l0_setup: interrupt is hooked
1142[ 6.922371] c1 1 input: STM VL53L0 proximity sensor as /devices/virtual/input/input3
1143[ 6.922489] c1 1 [LASER] stmvl53l0_setup: Misc device registration name:12-0029
1144[ 6.923243] c1 1 i2c-msm-v2 75ba000.i2c: msm_bus_scale_register_client(mstr-id:84):0x15 (ok)
1145[ 6.923601] c1 1 [LASER] stmvl53l0_setupAPIFunctions: read REVISION_ID: 0x10
1146[ 6.923601] c1 1 API_VERSION: 1.1.20.2
1147[ 6.923601] c1 1 [LASER] stmvl53l0_setupAPIFunctions: to setup API cut 1.1
1148[ 6.923608] c1 1 [LASER] stmvl53l0_init_client: Enter
1149[ 6.923609] c1 1 [LASER] stmvl53l0_init_client: Call of VL53L0_DataInit
1150[ 6.931294] c1 1 [LASER] stmvl53l0_init_client: Call of VL53L0_StaticInit
1151[ 6.994231] c1 1 [LASER] stmvl53l0_init_client: Perform and set VhvSettings = 31 and PhaseCal = 1
1152[ 6.995510] c1 1 [LASER] stmvl53l0_init_client: Set refSpadCount = 5 and isApertureSpads = 0
1153[ 6.995687] c1 1 [LASER] stmvl53l0_init_client: Set offset = 23
1154[ 6.996006] c1 1 [LASER] stmvl53l0_init_client: Set xtalk = 0x3
1155[ 6.996008] c1 1 [LASER] stmvl53l0_init_client: Set RIT - 68
1156[ 6.996010] c1 1 [LASER] stmvl53l0_init_client: Call of VL53L0_SetDeviceMode
1157[ 6.996375] c1 1 [LASER] stmvl53l0_init_client: End
1158[ 6.996377] c1 1 [LASER] stmvl53l0_setup: support ver. 1.1.20.2(1.0.5.1) enabled
1159[ 6.996381] c1 1 [LASER] stmvl53l0_setup: End--
1160[ 6.996381] c1 1 [LASER] stmvl53l0_probe: Success--
1161[ 6.996466] c1 1 [LASER] stmvl53l0_init_i2c: End with rc:0
1162[ 6.996468] c1 1 [LASER] stmvl53l0_init: End
1163[ 6.998511] c2 1 qcom,qpnp-rtc qpnp-rtc-8: rtc core: registered qpnp_rtc as rtc0
1164[ 6.998751] c2 1 i2c /dev entries driver
1165[ 6.999080] c2 1 [AUD] tfa9888: tfa9888_init
1166[ 6.999129] c2 1 i2c-core: driver [tfa9888] using legacy suspend method
1167[ 6.999130] c2 1 i2c-core: driver [tfa9888] using legacy resume method
1168[ 7.031845] c2 1 vmem: Up and running with 4 banks of memory from [io size 0x3f0826fdc9 64bit disabled]
1169[ 7.050388] c2 1 msm_camera_pinctrl_init:1185 Getting pinctrl handle failed
1170[ 7.050393] c2 1 msm_actuator_platform_probe:1954 ERR:msm_actuator_platform_probe: Error in reading actuator pinctrl
1171[ 7.050591] c2 1 qcom,actuator: probe of a0c000.qcom,cci:qcom,actuator@0 failed with error -22
1172[ 7.052426] c2 1 msm_eeprom_platform_probe failed 1673
1173[ 7.053083] c2 1 msm_eeprom_platform_probe failed 1673
1174[ 7.054799] c2 1 msm_camera_pinctrl_init:1185 Getting pinctrl handle failed
1175[ 7.054802] c2 1 msm_ois_platform_probe:745 ERR:msm_ois_platform_probe: Error in reading OIS pinctrl
1176[ 7.054997] c2 1 qcom,ois: probe of a0c000.qcom,cci:qcom,ois@0 failed with error -22
1177[ 7.059460] c2 1 msm8996-pinctrl 1010000.pinctrl: could not parse property pins
1178[ 7.064968] c2 1 MSM-CPP cpp_init_hardware:863 CPP HW Version: 0x60000000
1179[ 7.064973] c2 1 MSM-CPP cpp_init_hardware:881 stream_cnt:0
1180[ 7.079224] c2 1 __msm_jpeg_init:1537] Jpeg Device id 0
1181[ 7.079800] c2 1 __msm_jpeg_init:1537] Jpeg Device id 2
1182[ 7.084522] c2 1 __msm_jpeg_init:1537] Jpeg Device id 3
1183[ 7.084523] c2 1 msm_fd_hw_set_dt_parms_by_name: Error property does not exist
1184[ 7.178905] c2 1 msm_fd aa4000.qcom,fd: Face detection halt timeout
1185[ 7.180779] c2 1 i2c-msm-v2 75b5000.i2c: msm_bus_scale_register_client(mstr-id:84):0x1e (ok)
1186[ 7.181128] c2 1 SMB1351 smb1351_parallel_slave_probe: smb1351 parallel successfully probed.
1187[ 7.183311] c2 1 htc_battery_init: can't find compatible 'htc,htc_battery_store'
1188[ 7.185245] c2 1 [BATT] Probe process: (2, 1)
1189[ 7.185270] c2 1 [BATT] htc_battery_init done.
1190[ 7.185277] c1 277 FG: fg_probe: FG Probe success - FG Revision DIG:3.1 ANA:1.2 PMIC subtype=19
1191[ 7.186162] c1 273 [BATT] htc_battery_fb_register in
1192[ 7.186162] c2 1 set restart reason = 0x776655AA
1193[ 7.186166] c2 1 set restart msg = 'Unknown'
1194[ 7.186610] c1 268 FG: update_irq_volt_empty: voltage = 3050, converted_raw = 0038
1195[ 7.187957] c2 1 unable to find DT imem DLOAD mode node
1196[ 7.189872] c2 1 unable to find DT imem EDLOAD mode node
1197[ 7.222589] c2 1 device-mapper: uevent: version 1.0.3
1198[ 7.222831] c2 1 device-mapper: ioctl: 4.28.0-ioctl (2014-09-17) initialised: dm-devel@redhat.com
1199[ 7.222838] c2 1 device-mapper: req-crypt: dm-req-crypt successfully initalized.
1200[ 7.222838] c2 1
1201[ 7.222848] c2 1 Bluetooth: 0000000000000000
1202[ 7.224414] c2 1 Bluetooth: 0000000000000000
1203[ 7.224414] c2 1 bt_power bt_qca6174: no qca,bt-vdd-core-voltage-level property
1204[ 7.224533] c2 1 bt_power bt_qca6174: no qca,bt-vdd-pa-voltage-level property
1205[ 7.224535] c2 1 bt_dt_parse_vreg_info: qca,bt-vdd-ldo: is not provided in device tree
1206[ 7.224538] c2 1 bt_dt_parse_vreg_info: qca,bt-chip-pwd: is not provided in device tree
1207[ 7.225040] c2 1 ------------[ cut here ]------------
1208[ 7.225053] c2 1 WARNING: CPU: 2 PID: 1 at ../../../../../../kernel/google/marlin/fs/sysfs/dir.c:31 sysfs_warn_dup+0x64/0x84()
1209[ 7.225054] c2 1 sysfs: cannot create duplicate filenamices/system/cpu/cpu0/cpufreq/stats'
1210[ 7.225059] c2 1 Modules linked in:
1211[ 7.225065] c2 1 CPU: 2 PID: 1 Comm: swapper/0 Not tainted 3.18.70-Lineage-g54b61efe09a-dirty #42
1212[ 7.225067] c2 1 Hardware name: HTC Corporation. MSM8996pro v1.1 + PMI8996 Marlin A (DT)
1213[ 7.225071] c2 1 Call trace:
1214[ 7.225082] c2 1 [<ffffffc00008ca08>] dump_backtrace+0x0/0x13c
1215[ 7.225084] c2 1 [<ffffffc00008cdf4>] show_stack+0x14/0x1c
1216[ 7.225094] c2 1 [<ffffffc000febcdc>] dump_stack+0x88/0xac
1217[ 7.225098] c2 1 [<ffffffc0000adacc>] warn_slowpath_fmt+0xc8/0x100
1218[ 7.225100] c2 1 [<ffffffc000270e74>] sysfs_warn_dup+0x64/0x84
1219[ 7.225102] c2 1 [<ffffffc0002718b4>] internal_create_group+0x21c/0x22c
1220[ 7.225104] c2 1 [<ffffffc0002718d8>] sysfs_create_group+0x14/0x1c
1221[ 7.225114] c2 1 [<ffffffc0009381bc>] __cpufreq_stats_create_table.part.7+0x6c/0x1d4
1222[ 7.225115] c2 1 [<ffffffc0017c43fc>] cpufreq_stats_init+0x188/0x330
1223[ 7.225118] c2 1 [<ffffffc000082bb0>] do_one_initcall+0x98/0x1cc
1224[ 7.225125] c2 1 [<ffffffc001783c54>] kernel_init_freeable+0x1d0/0x284
1225[ 7.225128] c2 1 [<ffffffc000fe5f9c>] kernel_init+0x18/0x134
1226[ 7.225194] c2 1 ---[ end trace 54b22d7dc2e21d37 ]---
1227[ 7.225223] c2 1 ------------[ cut here ]------------
1228[ 7.225226] c2 1 WARNING: CPU: 2 PID: 1 at ../../../../../../kernel/google/marlin/fs/sysfs/dir.c:31 sysfs_warn_dup+0x64/0x84()
1229[ 7.225228] c2 1 sysfs: cannot create duplicate filenamices/system/cpu/cpu2/cpufreq/stats'
1230[ 7.225229] c2 1 Modules linked in:
1231[ 7.225231] c2 1 CPU: 2 PID: 1 Comm: swapper/0 Tainted: G W 3.18.70-Lineage-g54b61efe09a-dirty #42
1232[ 7.225232] c2 1 Hardware name: HTC Corporation. MSM8996pro v1.1 + PMI8996 Marlin A (DT)
1233[ 7.225233] c2 1 Call trace:
1234[ 7.225235] c2 1 [<ffffffc00008ca08>] dump_backtrace+0x0/0x13c
1235[ 7.225237] c2 1 [<ffffffc00008cdf4>] show_stack+0x14/0x1c
1236[ 7.225239] c2 1 [<ffffffc000febcdc>] dump_stack+0x88/0xac
1237[ 7.225241] c2 1 [<ffffffc0000adacc>] warn_slowpath_fmt+0xc8/0x100
1238[ 7.225242] c2 1 [<ffffffc000270e74>] sysfs_warn_dup+0x64/0x84
1239[ 7.225244] c2 1 [<ffffffc0002718b4>] internal_create_group+0x21c/0x22c
1240[ 7.225246] c2 1 [<ffffffc0002718d8>] sysfs_create_group+0x14/0x1c
1241[ 7.225248] c2 1 [<ffffffc0009381bc>] __cpufreq_stats_create_table.part.7+0x6c/0x1d4
1242[ 7.225250] c2 1 [<ffffffc0017c43fc>] cpufreq_stats_init+0x188/0x330
1243[ 7.225252] c2 1 [<ffffffc000082bb0>] do_one_initcall+0x98/0x1cc
1244[ 7.225253] c2 1 [<ffffffc001783c54>] kernel_init_freeable+0x1d0/0x284
1245[ 7.225255] c2 1 [<ffffffc000fe5f9c>] kernel_init+0x18/0x134
1246[ 7.225256] c2 1 ---[ end trace 54b22d7dc2e21d38 ]---
1247[ 7.229446] c2 1 hidraw: raw HID events driver (C) Jiri Kosina
1248[ 7.229872] c2 1 usbcore: registered new interface driver usbhid
1249[ 7.229872] c2 1 usbhid: USB HID core driver
1250[ 7.230408] c2 1 ashmem: initialized
1251[ 7.422497] c1 273 [TP]:fwu_start_reflash: Start of reflash process
1252[ 7.422586] c1 273 [TP]: [ERR]:fwu_start_reflash: Firmware image synaptics_bl71.img not available
1253[ 7.422588] c1 273 [TP]:fwu_start_reflash: End of reflash process
1254[ 7.422590] c1 273 [TP]:synaptics_config_updater
1255[ 7.423532] c1 273 [TP]:synaptics_config_updater: Device config ID = 4d31763200180000000000000000000000000000000000000000000000000000
1256[ 7.423533] c1 273 [TP]:synaptics_config_updater: Start ofig process
1257[ 7.476849] c1 273 [TP]: fwu_get_tw_vendor_v7: tw_vendor = 0x2
1258[ 7.476862] c1 273 [TP]:synaptics_config_updater: Image config ID = 4d31763200180000000000000000000000000000000000000000000000000000
1259[ 7.476864] c1 273 [TP]:synaptics_config_updater: config_
1260[ 7.476869] c1 273 [TP]: synaptics_config_updater: crc_cksum = 66A6880E
1261[ 7.478513] c1 273 [TP]: crc_comparison_v7: config_crc = 66A6880E, flash_crc = 66A6880E
1262[ 7.478515] c1 273 [TP]: synaptics_config_updater: No need to update
1263[ 7.478534] c1 273 [TP]:synaptics_rmi4_reset_device from synaptics_config_updater+0x128/0xd38, rebuild = 0
1264[ 7.508024] c1 273 [TP]:synaptics_rmi4_f12_init: Function 12 max x = 1439 max y = 2559 Rx: 17 Tx: 30
1265[ 7.508644] c1 273 [TP]synaptics_rmi4_f12_init:Wakeup Gesture range (0,0) -> (1439,2559)
1266[ 7.508903] c1 273 [TP]:synaptics_rmi4_f12_init report data init done
1267[ 7.516710] c1 273 [TP]:synaptics_rmi4_query_device: chip_id:3708, firmware_id:2433782
1268[ 7.517627] c1 273 [TP]:synaptics_rmi4_query_device: config_version: 4d31763200180000000000000000000000000000000000000000000000000000
1269[ 7.523706] c1 273 [TP]:synaptics_config_updater: End of g process
1270[ 7.523708] c1 273 [TP]: synaptics_config_updater end
1271[ 7.933417] c2 1 nanohub: loaded; ret=0
1272[ 7.933544] c2 1 qpnp_coincell_charger_show_state: enabled=Y, voltage=3200 mV, resistance=2100 ohm
1273[ 7.938678] c2 1 bimc-bwmon 408000.qcom,cpu-bwmon: BW HWmon governor registered.
1274[ 7.940048] c2 1 arm-memlat-mon soc:qcom,arm-memlat-mon-0: Memory Latency governor registered.
1275[ 7.940076] c2 1 arm-memlat-mon soc:qcom,arm-memlat-mon-2: Memory Latency governor registered.
1276[ 7.942520] c2 1 m4m-hwmon 6530000.qcom,m4m-hwmon: Cache HWmon governor registered.
1277[ 7.946405] c2 1 devfreq soc:qcom,cpubw: Couldn't update frequency transition information.
1278[ 7.946511] c2 1 devfreq soc:qcom,mincpubw: Couldn't update frequency transition information.
1279[ 7.946606] c2 1 devfreq soc:qcom,memlat-cpu0: Couldn't update frequency transition information.
1280[ 7.946698] c2 1 devfreq soc:qcom,memlat-cpu2: Couldn't update frequency transition information.
1281[ 7.951639] c2 1 [NC] == NC_probe ==
1282[ 7.951641] c2 1 [NC] Init GPIO pins
1283[ 7.951947] c2 1 usbcore: registered new interface driver snd-usb-audio
1284[ 7.953284] c2 1 tfa98xx_i2c_init(): TFA98XX driver version 2.10.1-a
1285[ 7.953314] c2 1 tfa98xx_i2c_probe(): tfa98xx_i2c_probe
1286[ 7.953675] c2 1 tfa98xx_i2c_probe(): TFA9891 detected
1287[ 7.953686] c2 1 tfa98xx 7-0034: Skipping IRQ registration
1288[ 7.953758] c2 1 tfa98xx_i2c_probe(): tfa98xx_i2c_probe Probe completed successfully!
1289[ 7.954543] c2 1 msm8996-pinctrl 1010000.pinctrl: could not parse property pins
1290[ 7.954604] c2 1 msm8996-pinctrl 1010000.pinctrl: could not parse property pins
1291[ 7.964778] c2 1 msm-dai-tdm soc:qcom,msm-dai-tdm-tert-rx: msm_dai_tdm_q6_probe: dev_name: soc:qcom,msm-dai-tdm-tert-rx group_id: 0x9120
1292[ 7.965005] c2 1 msm-dai-q6-tdm soc:qcom,msm-dai-tdm-teai-q6-tdm-tert-rx-0: msm_dai_q6_tdm_dev_probe: dev_name: soc:qcom,msm-dai-tdm-tert-rx:qcom,msm-dai-q6-tdm-tert-rx-0 dev_id: 0x9020
1293[ 7.965010] c2 1 msm-dai-q6-tdm soc:qcom,msm-dai-tdm-teustom tdm header not supported
1294[ 7.965149] c2 1 msm-dai-q6-tdm soc:qcom,msm-dai-tdm-tert-rx:qcom,msm-dai-q6-tdm-tert-rx-1: msm_dai_q6_tdm_dev_probe: dev_name: soc:qcom,msm-dai-tdm-tert-rx:qcom,msm-dai-q6-tdm-tert-rx-1 dev_id: 0x9022
1295[ 7.965154] c2 1 msm-dai-q6-tdm soc:qcom,msm-dai-tdm-te not supported
1296[ 7.965288] c2 1 msm-dai-q6-tdm soc:qcom,msm-dai-tdm-tert-rx:qcom,msm-dai-q6-tdm-tert-rx-2: msm_dai_q6_tdm_dev_probe: dev_name: soc:qcom,msm-dai-tdm-tert-rx:qcom,msm-dai-q6-tdm-tert-rx-2 dev_id: 0x9024
1297[ 7.965292] c2 1 msm-dai-q6-tdm soc:qcom,msm-dai-tdm-te not supported
1298[ 7.965419] c2 1 msm-dai-q6-tdm soc:qcom,msm-dai-tdm-tert-rx:qcom,msm-dai-q6-tdm-tert-rx-3: msm_dai_q6_tdm_dev_probe: dev_name: soc:qcom,msm-dai-tdm-tert-rx:qcom,msm-dai-q6-tdm-tert-rx-3 dev_id: 0x9026
1299[ 7.965423] c2 1 msm-dai-q6-tdm soc:qcom,msm-dai-tdm-te not supported
1300[ 7.965441] c2 1 msm-dai-tdm soc:qcom,msm-dai-tdm-tert-tx: msm_dai_tdm_q6_probe: dev_name: soc:qcom,msm-dai-tdm-tert-tx group_id: 0x9121
1301[ 7.965634] c2 1 msm-dai-q6-tdm soc:qcom,msm-dai-tdm-teai-q6-tdm-tert-tx-0: msm_dai_q6_tdm_dev_probe: dev_name: soc:qcom,msm-dai-tdm-tert-tx:qcom,msm-dai-q6-tdm-tert-tx-0 dev_id: 0x9021
1302[ 7.965638] c2 1 msm-dai-q6-tdm soc:qcom,msm-dai-tdm-teustom tdm header not supported
1303[ 7.965768] c2 1 msm-dai-q6-tdm soc:qcom,msm-dai-tdm-tert-tx:qcom,msm-dai-q6-tdm-tert-tx-1: msm_dai_q6_tdm_dev_probe: dev_name: soc:qcom,msm-dai-tdm-tert-tx:qcom,msm-dai-q6-tdm-tert-tx-1 dev_id: 0x9023
1304[ 7.965772] c2 1 msm-dai-q6-tdm soc:qcom,msm-dai-tdm-te not supported
1305[ 7.965899] c2 1 msm-dai-q6-tdm soc:qcom,msm-dai-tdm-tert-tx:qcom,msm-dai-q6-tdm-tert-tx-2: msm_dai_q6_tdm_dev_probe: dev_name: soc:qcom,msm-dai-tdm-tert-tx:qcom,msm-dai-q6-tdm-tert-tx-2 dev_id: 0x9025
1306[ 7.965903] c2 1 msm-dai-q6-tdm soc:qcom,msm-dai-tdm-te not supported
1307[ 7.966031] c2 1 msm-dai-q6-tdm soc:qcom,msm-dai-tdm-tert-tx:qcom,msm-dai-q6-tdm-tert-tx-3: msm_dai_q6_tdm_dev_probe: dev_name: soc:qcom,msm-dai-tdm-tert-tx:qcom,msm-dai-q6-tdm-tert-tx-3 dev_id: 0x9027
1308[ 7.966034] c2 1 msm-dai-q6-tdm soc:qcom,msm-dai-tdm-te not supported
1309[ 7.966051] c2 1 msm-dai-tdm soc:qcom,msm-dai-tdm-quat-rx: msm_dai_tdm_q6_probe: dev_name: soc:qcom,msm-dai-tdm-quat-rx group_id: 0x9130
1310[ 7.966177] c2 1 msm-dai-q6-tdm soc:qcom,msm-dai-tdm-quai-q6-tdm-quat-rx-0: msm_dai_q6_tdm_dev_probe: dev_name: soc:qcom,msm-dai-tdm-quat-rx:qcom,msm-dai-q6-tdm-quat-rx-0 dev_id: 0x9030
1311[ 7.966181] c2 1 msm-dai-q6-tdm soc:qcom,msm-dai-tdm-quustom tdm header not supported
1312[ 7.966310] c2 1 msm-dai-q6-tdm soc:qcom,msm-dai-tdm-quat-rx:qcom,msm-dai-q6-tdm-quat-rx-1: msm_dai_q6_tdm_dev_probe: dev_name: soc:qcom,msm-dai-tdm-quat-rx:qcom,msm-dai-q6-tdm-quat-rx-1 dev_id: 0x9032
1313[ 7.966313] c2 1 msm-dai-q6-tdm soc:qcom,msm-dai-tdm-qu not supported
1314[ 7.966440] c2 1 msm-dai-q6-tdm soc:qcom,msm-dai-tdm-quat-rx:qcom,msm-dai-q6-tdm-quat-rx-2: msm_dai_q6_tdm_dev_probe: dev_name: soc:qcom,msm-dai-tdm-quat-rx:qcom,msm-dai-q6-tdm-quat-rx-2 dev_id: 0x9034
1315[ 7.966444] c2 1 msm-dai-q6-tdm soc:qcom,msm-dai-tdm-qu not supported
1316[ 7.966574] c2 1 msm-dai-q6-tdm soc:qcom,msm-dai-tdm-quat-rx:qcom,msm-dai-q6-tdm-quat-rx-3: msm_dai_q6_tdm_dev_probe: dev_name: soc:qcom,msm-dai-tdm-quat-rx:qcom,msm-dai-q6-tdm-quat-rx-3 dev_id: 0x9036
1317[ 7.966578] c2 1 msm-dai-q6-tdm soc:qcom,msm-dai-tdm-qu not supported
1318[ 7.966594] c2 1 msm-dai-tdm soc:qcom,msm-dai-tdm-quat-tx: msm_dai_tdm_q6_probe: dev_name: soc:qcom,msm-dai-tdm-quat-tx group_id: 0x9131
1319[ 7.966721] c2 1 msm-dai-q6-tdm soc:qcom,msm-dai-tdm-quai-q6-tdm-quat-tx-0: msm_dai_q6_tdm_dev_probe: dev_name: soc:qcom,msm-dai-tdm-quat-tx:qcom,msm-dai-q6-tdm-quat-tx-0 dev_id: 0x9031
1320[ 7.966725] c2 1 msm-dai-q6-tdm soc:qcom,msm-dai-tdm-quustom tdm header not supported
1321[ 7.966850] c2 1 msm-dai-q6-tdm soc:qcom,msm-dai-tdm-quat-tx:qcom,msm-dai-q6-tdm-quat-tx-1: msm_dai_q6_tdm_dev_probe: dev_name: soc:qcom,msm-dai-tdm-quat-tx:qcom,msm-dai-q6-tdm-quat-tx-1 dev_id: 0x9033
1322[ 7.966854] c2 1 msm-dai-q6-tdm soc:qcom,msm-dai-tdm-qu not supported
1323[ 7.966978] c2 1 msm-dai-q6-tdm soc:qcom,msm-dai-tdm-quat-tx:qcom,msm-dai-q6-tdm-quat-tx-2: msm_dai_q6_tdm_dev_probe: dev_name: soc:qcom,msm-dai-tdm-quat-tx:qcom,msm-dai-q6-tdm-quat-tx-2 dev_id: 0x9035
1324[ 7.966982] c2 1 msm-dai-q6-tdm soc:qcom,msm-dai-tdm-qu not supported
1325[ 7.967107] c2 1 msm-dai-q6-tdm soc:qcom,msm-dai-tdm-quat-tx:qcom,msm-dai-q6-tdm-quat-tx-3: msm_dai_q6_tdm_dev_probe: dev_name: soc:qcom,msm-dai-tdm-quat-tx:qcom,msm-dai-q6-tdm-quat-tx-3 dev_id: 0x9037
1326[ 7.967111] c2 1 msm-dai-q6-tdm soc:qcom,msm-dai-tdm-qu not supported
1327[ 7.977574] c2 1 [AUD] snd_soc_msm8996: uart_gpios_init done
1328[ 7.977577] c2 1 [AUD] snd_soc_msm8996: aud,uart-disable-mbhc is not set
1329[ 7.977583] c2 1 msm8996-asoc-snd soc:sound-9335: property qcom,tfa9888-reset-gpio not detected in node /soc/sound-9335
1330[ 7.977619] c2 1 [AUD] snd_soc_msm8996: msm8994_init_ftm_btpcm: btpcm gpio ftm-btpcm-dout no 67
1331[ 7.977636] c2 1 [AUD] snd_soc_msm8996: msm8994_init_ftm_btpcm: btpcm gpio ftm-btpcm-din no 68
1332[ 7.977652] c2 1 [AUD] snd_soc_msm8996: msm8994_init_ftm_btpcm: btpcm gpio ftm-btpcm-clock no 65
1333[ 7.977668] c2 1 [AUD] snd_soc_msm8996: msm8994_init_ftm_btpcm: btpcm gpio ftm-btpcm-sync no 66
1334[ 7.977684] c2 1 [AUD] snd_soc_msm8996: htc_msm8996_parse_gpio: gpio rcv-amp-gpio-en no 31
1335[ 7.979114] c2 1 msm8996-asoc-snd soc:sound-9335: ASoC: platform (null) not registered
1336[ 7.981014] c2 1 GACT probability NOT on
1337[ 7.981022] c2 1 Mirror/redirect action on
1338[ 7.981034] c2 1 u32 classifier
1339[ 7.981035] c2 1 Actions configured
1340[ 7.981050] c2 1 Netfilter messages via NETLINK v0.30.
1341[ 7.981055] c2 1 nfnl_acct: registering with nfnetlink.
1342[ 7.981075] c2 1 nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
1343[ 7.981227] c2 1 ctnetlink v0.93: registering with nfnetlink.
1344[ 7.981543] c2 1 xt_time: kernel timezone is -0000
1345[ 7.981667] c2 1 ip_tables: (C) 2000-2006 Netfilter Core Team
1346[ 7.981728] c2 1 arp_tables: (C) 2002 David S. Miller
1347[ 7.981747] c2 1 TCP: cubic registered
1348[ 7.981753] c2 1 Initializing XFRM netlink socket
1349[ 7.981919] c2 1 NET: Registered protocol family 10
1350[ 7.982378] c2 1 mip6: Mobile IPv6
1351[ 7.982388] c2 1 ip6_tables: (C) 2000-2006 Netfilter Core Team
1352[ 7.982450] c2 1 sit: IPv6 over IPv4 tunneling driver
1353[ 7.982649] c2 1 NET: Registered protocol family 17
1354[ 7.982659] c2 1 NET: Registered protocol family 15
1355[ 7.982681] c2 1 bridge: automatic filtering via arp/ip/ip6tables has been deprecated. Update your scripts to load br_netfilter if you need this.
1356[ 7.982691] c2 1 Bridge firewalling registered
1357[ 7.s v2.0 registered
1358[ 7.982832] c2 1 Bluetooth: 0000000000000000
1359[ 7.982860] c2 1 Bluetooth: 0000000000000000
1360[ 7.982860] c2 1 l2tp_core: L2TP core driver, V2.0
1361[ 7.982867] c2 1 l2tp_ppp: PPPoL2TP kernel driver, V2.0
1362[ 7.982869] c2 1 l2tp_ip: L2TP IP encapsulation support (L2TPv3)
1363[ 7.982880] c2 1 l2tp_netlink: L2TP netlink interface
1364[ 7.982893] c2 1 l2tp_eth: L2TP ethernet pseudowire support (L2TPv3)
1365[ 7.982900] c2 1 l2tp_debugfs: L2TP debugfs support
1366[ 7.982903] c2 1 l2tp_ip6: L2TP IP encapsulation support for IPv6 (L2TPv3)
1367[ 7.983737] c2 1 NET: Registered protocol family 27
1368[ 7.985380] c0 273 usb_otg_vreg: no parameters
1369[ 7.985441] c0 273 reg-fixed-voltage soc:usb-otg-switch: Failed to find supply vin
1370[ 7.985495] c0 273 reg-fixed-voltage soc:usb-otg-switch: Failed to register regulator: -517
1371[ 7.988050] c1 273 subsys-pil-tz 9300000.qcom,lpass: for adsp segments only will be dumped.
1372[ 7.989202] c1 273 subsys-pil-tz 1c00000.qcom,ssc: for slpi segments only will be dumped.
1373[ 7.990894] c1 273 pil-q6v5-mss 2080000.qcom,mss: Failed to find the pas_id.
1374[ 7.992070] c1 273 pil-q6v5-mss 2080000.qcom,mss: for modem segments only will be dumped.
1375[ 7.996309] c1 273 sps:BAM 0x0000000000000000 is registered.
1376[ 7.996309] c1 273 qpnp-smbcharger qpnp-smbcharger-16: node /soc/qcom,spmi@400f000/qcom,pmi8994@2/qcom,qpnp-smbcharger IO resource absent!
1377[ 7.996325] c1 273 SMBCHG: smbchg_check_chg_version: PMI8.1
1378[ 7.996445] c1 273 smbcharger_charger_otg: no parameters
1379[ 7.996542] c1 273 smbcharger_external_otg: no parameters
1380[ 7.996568] c1 273 smbcharger_external_otg: supplied by pmi8994_boost_5v
1381[ 7.996959] c1 273 SMBCHG: battchg_suspend: 1 voting for 0 - on
1382[ 7.996980] c1 273 SMBCHG: usb_suspend: 7 voting for 0 - off
1383[ 7.997370] c1 273 SMBCHG: usb_suspend: 0 voting for 0 - off
1384[ 7.997372] c1 273 SMBCHG: dc_suspend: 0 voting for 0 - off
1385[ 7.997429] c1 273 SMBCHG: dcl_icl: 0 voting for 1500 - on
1386[ 7.997466] c1 273 SMBCHG: fcc: 1 voting for 3200 - on
1387[ 7.997638] c1 273 SMBCHG: hwaicl_enable_indirect: 0 voting for 0 - on
1388[ 7.997640] c1 273 SMBCHG: hwaicl_disable: 0 voting for 0 - off
1389[ 7.998116] c1 18 SMBCHG: smbchg_clean_tcc_WA_work: called before init
1390[ 8.018986] c1 273 SMBCHG: hwaicl_disable: 1 voting for 0 - off
1391[ 8.018988] c1 273 SMBCHG: usb_suspend: 6 voting for 0 - off
1392[ 8.019048] c1 273 SMBCHG: usb_icl: 0 voting for 100 - on
1393[ 8.019051] c1 273 SMBCHG: usb_suspend: 2 voting for 0 - off
1394[ 8.019195] c1 273 SMB1351 smb1351_parallel_set_chg_present: set slave present = 0 -> 1
1395[ 8.021514] c1 273 SMB1351 smb1351_usb_suspend: reason = 4 requested_suspend = 1 suspended_status = 0 -> 4
1396[ 8.021765] c1 273 SMB1351 smb1351_usb_suspend: reason = 16 requested_suspend = 0 suspended_status = 4 -> 4
1397[ 8.042841] c1 365 [USB] USB3_QSERDES_TX_DRV_LVL = 0x13
1398[ 8.045618] c1 365 SMBCHG: battchg_suspend: 1 voting for 0 - on
1399[ 8.045652] c1 365 SMBCHG: usb_icl: 0 voting for 0 - on
1400[ 8.045655] c1 365 SMBCHG: usb_suspend: 2 voting for 0 - on
1401[ 8.048488] c1 273 qpnp-smbcharger qpnp-smbcharger-16: node /soc/qcom,spmi@400f000/qcom,pmi8994@2/qcom,qpnp-smbcharger IO resource absent!
1402[ 8.048498] c1 273 smbchg_debug_mask=0x6
1403[ 8.048500] : rerun_hvdcp_det_if_necessary: HVDCP not support, return directly
1404[ 8.050405] c1 365 SMBCHG: battchg_suspend: 1 voting for 0 - on
1405[ 8.050411] c1 365 SMBCHG: smbchg_external_power_changed: usb type = 4, current_limit = 0, rc = 0
1406[ 8.050413] c1 365 SMBCHG: smbchg_stay_awake: staying awake: 0x02 (bit 2)
1407[ 8.050416] c1 365 SMBCHG: smbchg_vfloat_adjust_check: Starting vfloat adjustments
1408[ 8.050455] c1 365 SMBCHG: smbchg_relax: relaxing: 0x00 (bit 2)
1409[ 8.051822] c1 273 qpnp-smbcharger qpnp-smbcharger-16: SMBCHG successfully probe Charger version=SCHG Revision DIG:2.0 ANA:2.1 batt=1 dc=0 usb=1
1410[ 8.051823] c1 273 [BATT] Probe process: (0, 2)
1411[ 8.0G: handle_usb_insertion: triggered
1412[ 8.051895] c1 273 SMBCHG: handle_usb_insertion: inserted type = 4 (SDP)
1413[ 8.051896] c1 273 SMBCHG: smbchg_change_usb_supply_type: Type 4: setting mA = 100
1414[ 8.051898] c1 273 SMBCHG: usb_icl: 0 voting for 100 - on
1415[ 8.051901] c1 273 SMBCHG: smbchg_set_usb_current_max: USB current_ma = 100
1416[ 8.051902] c1 273 SMBCHG: usb_suspend: 2 voting for 0 - off
1417[ 8.051988] c1 273 SMBCHG: smbchg_set_usb_current_max: usb type = 4 current set to 100 mA
1418[ 8.052000] c0 386 SMBCHG: power_ok_handler: triggered: 0x01. prev_power_ok(-1) power_ok(1)
1419[ 8.052006] c1 273 SMBCHG: smbchg_stay_awake: staying awake: 0x01 (bit 1)
1420[ 8.052081] c1 346 SMBCHG: battchg_suspend: 1 voting for 0 - on
1421[ 8.052084] c1 346 SMBCHG: smbchg_external_power_changed: usb type = 4, current_limit = 0, rc = 0
1422[ 8.052085] c1 346 SMBCHG: usb_icl: 0 voting for 0 - on
1423[ 8.052087] c1 346 SMBCHG: smbchg_set_usb_current_max: USB current_ma = 0
1424[ 8.052088] c1 346 SMBCHG: usb_suspend: 2 voting for 0 - on
1425[ 8.052107] c1 346 SMBCHG: smbchg_set_usb_current_max: usb type = 4 current set to 0 mA
1426[ 8.052119] c1 346 SMBCHG: smbchg_vfloat_adjust_check: Starting vfloat adjustments
1427[ 8.052158] c0 386 SMBCHG: power_ok_handler: triggered: 0x00.
1428[ 8.052412] c1 346 SMBCHG: battchg_suspend: 1 voting for 0 - on
1429[ 8.052414] c1 346 SMBCHG: smbchg_external_power_changed: usb type = 4, current_limit = 0, rc = 0
1430[ 8.052416] c1 346 SMBCHG: smbchg_vfloat_adjust_check: Starting vfloat adjustments
1431[ 8.052639] c1 346 SMBCHG: battchg_suspend: 1 voting for 0 - on
1432[ 8.052642] c1 346 SMBCHG: smbchg_external_power_changed: usb type = 4, current_limit = 0, rc = 0
1433[ 8.052643] c1 346 SMBCHG: smbchg_vfloat_adjust_check: Starting vfloat adjustments
1434[ 8.052866] c1 273 SMBCHG: pmi8994_boot_update_usb_status: Update usb type!
1435[ 8.052867] c1 273 SMBCHG: smbchg_rerun_aicl: Rerunning AICL...
1436[ 8.102236] c1 277 dwc3 dwc3_msm_notify_attached_source: id_state = 1
1437[ 8.102536] c1 277 SMBCHG: smbchg_battery_set_property: Received resistor change (0)->(1)
1438[ 8.102573] c1 346 SMBCHG: smbchg_sink_current_change_worker: Skipped, chg_type: 4, sink_current: 1
1439[ 8.104299] c1 273 [AUD] snd_soc_msm8996: uart_gpios_init done
1440[ 8.104350] c1 273 [AUD] snd_soc_msm8996: aud,uart-disable-mbhc is not set
1441[ 8.104357] c1 273 msm8996-asoc-snd soc:sound-9335: property qcom,tfa9888-reset-gpio not detected in node /soc/sound-9335
1442[ 8.104471] c1 273 [AUD] snd_soc_msm8996: msm8994_init_ftm_btpcm: btpcm gpio ftm-btpcm-dout no 67
1443[ 8.104495] c1 273 [AUD] snd_soc_msm8996: msm8994_init_ftm_btpcm: btpcm gpio ftm-btpcm-din no 68
1444[ 8.104517] c1 273 [AUD] snd_soc_msm8996: msm8994_init_ftm_btpcm: btpcm gpio ftm-btpcm-clock no 65
1445[ 8.104537] c1 273 [AUD] snd_soc_msm8996: msm8994_init_ftm_btpcm: btpcm gpio ftm-btpcm-sync no 66
1446[ 8.104558] c1 273 [AUD] snd_soc_msm8996: htc_msm8996_parse_gpio: gpio rcv-amp-gpio-en no 31
1447[ 8.106310] c1 273 msm8996-asoc-snd soc:sound-9335: ASoC: platform (null) not registered
1448[ 8.106686] c1 273 usb_otg_vreg: no parameters
1449[ 8.106716] c1 273 usb_otg_vreg: supplied by smbcharger_external_otg
1450[ 8.107938] c1 273 [AUD] snd_soc_msm8996: uart_gpios_init done
1451[ 8.107941] c1 273 [AUD] snd_soc_msm8996: aud,uart-disable-mbhc is not set
1452[ 8.107948] c1 273 msm8996-asoc-snd soc:sound-9335: property qcom,tfa9888-reset-gpio not detected in node /soc/sound-9335
1453[ 8.108028] c1 273 [AUD] snd_soc_msm8996: msm8994_init_ftm_btpcm: btpcm gpio ftm-btpcm-dout no 67
1454[ 8.108052] c1 273 [AUD] snd_soc_msm8996: msm8994_init_ftm_btpcm: btpcm gpio ftm-btpcm-din no 68
1455[ 8.108073] c1 273 [AUD] snd_soc_msm8996: msm8994_init_ftm_btpcm: btpcm gpio ftm-btpcm-clock no 65
1456[ 8.108092] c1 273 [AUD] snd_soc_msm8996: msm8994_init_ftm_btpcm: btpcm gpio ftm-btpcm-sync no 66
1457[ 8.108113] c1 273 [AUD] snd_soc_msm8996: htc_msm8996_parse_gpio: gpio rcv-amp-gpio-en no 31
1458[ 8.109882] c1 273 msm8996-asoc-snd soc:sound-9335: ASoC: platform (null) not registered
1459[ 8.119021] c2 1 Registered cp15_barrier emulation handler
1460[ 8.125607] c2 1 Registered setend emulation handler
1461[ 8.125847] c2 1 Loading compiled-in X.509 certificates
1462[ 8.126124] c2 1 Loaded X.509 cert 'Google Inc.: Android: 34e81e2c57675086f628c1b2e4b4ade8e0a1941d'
1463[ 8.126384] c2 1 Loaded X.509 cert 'Google Inc.: Android: 7580d366b6e2804279fd88e290c82a5a7d5dd610'
1464[ 8.126604] c2 1 Loaded X.509 cert 'Android: 7e4333f9bba00adfe0ede979e28ed1920492b40f'
1465[ 8.126823] c2 1 Loaded X.509 cert 'Google Inc.: Android: 01c0e929566dbaa236b29ae14be86f003332a866'
1466[ 8.126837] c2 1 registered taskstats version 1
1467[ 8.127841] c2 1 Key type encrypted registered
1468[ 8.171630] c2 1 fastrpc soc:qcom,msm-adsprpc-mem: for adsp_rh segments only will be dumped.
1469[ 8.171712] c2 1 adsprpc: channel link type: 0
1470[ 8.179332] c2 273 [AUD] snd_soc_msm8996: uart_gpios_init done
1471[ 8.179335] c2 273 [AUD] snd_soc_msm8996: aud,uart-disable-mbhc is not set
1472[ 8.179340] c2 273 msm8996-asoc-snd soc:sound-9335: property qcom,tfa9888-reset-gpio not detected in node /soc/sound-9335
1473[ 8.179377] c2 273 [AUD] snd_soc_msm8996: msm8994_init_ftm_btpcm: btpcm gpio ftm-btpcm-dout no 67
1474[ 8.179393] c2 273 [AUD] snd_soc_msm8996: msm8994_init_ftm_btpcm: btpcm gpio ftm-btpcm-din no 68
1475[ 8.179409] c2 273 [AUD] snd_soc_msm8996: msm8994_init_ftm_btpcm: btpcm gpio ftm-btpcm-clock no 65
1476[ 8.179425] c2 273 [AUD] snd_soc_msm8996: msm8994_init_ftm_btpcm: btpcm gpio ftm-btpcm-sync no 66
1477[ 8.179441] c2 273 [AUD] snd_soc_msm8996: htc_msm8996_parse_gpio: gpio rcv-amp-gpio-en no 31
1478[ 8.180857] c2 273 msm8996-asoc-snd soc:sound-9335: ASoC: platform (null) not registered
1479[ 8.182474] c2 273 [AUD] snd_soc_msm8996: uart_gpios_init done
1480[ 8.182477] c2 273 [AUD] snd_soc_msm8996: aud,uart-disable-mbhc is not set
1481[ 8.182482] c2 273 msm8996-asoc-snd soc:sound-9335: property qcom,tfa9888-reset-gpio not detected in node /soc/sound-9335
1482[ 8.182518] c2 273 [AUD] snd_soc_msm8996: msm8994_init_ftm_btpcm: btpcm gpio ftm-btpcm-dout no 67
1483[ 8.182534] c2 273 [AUD] snd_soc_msm8996: msm8994_init_ftm_btpcm: btpcm gpio ftm-btpcm-din no 68
1484[ 8.182550] c2 273 [AUD] snd_soc_msm8996: msm8994_init_ftm_btpcm: btpcm gpio ftm-btpcm-clock no 65
1485[ 8.182565] c2 273 [AUD] snd_soc_msm8996: msm8994_init_ftm_btpcm: btpcm gpio ftm-btpcm-sync no 66
1486[ 8.182580] c2 273 [AUD] snd_soc_msm8996: htc_msm8996_parse_gpio: gpio rcv-amp-gpio-en no 31
1487[ 8.184018] c2 273 msm8996-asoc-snd soc:sound-9335: ASoC: platform (null) not registered
1488[ 8.185197] c2 1 RNDIS_IPA module is loaded.
1489[ 8.185197] c2 1 file system registered
1490[ 8.185227] c2 1 mbim_init: initialize 1 instances
1491[ 8.185311] c2 1 mbim_init: Initialized 1 ports
1492[ 8.186208] c2 1 rndis_qc_init: initialize rndis QC instance
1493[ 8.186328] c2 1 Number of LUNs=8
1494[ 8.186334] c2 1 Mass Storage Function, version: 2009/09/11
1495[ 8.186336] c2 1 LUN: removable file: (no medium)
1496[ 8.186345] c2 1 Number of LUNs=1
1497[ 8.186367] c2 1 LUN: removable file: (no medium)
1498[ 8.186368] c2 1 Number of LUNs=1
1499[ 8.186501] c2 1 android_usb gadget: android_usb ready
1500[ 8.187444] c2 273 [AUD] snd_soc_msm8996: uart_gpios_init done
1501[ 8.187446] c2 273 [AUD] snd_soc_msm8996: aud,uart-disable-mbhc is not set
1502[ 8.187451] c2 273 msm8996-asoc-snd soc:sound-9335: property qcom,tfa9888-reset-gpio not detected in node /soc/sound-9335
1503[ 8.187487] c2 273 [AUD] snd_soc_msm8996: msm8994_init_ftm_btpcm: btpcm gpio ftm-btpcm-dout no 67
1504[ 8.187503] c2 273 [AUD] snd_soc_msm8996: msm8994_init_ftm_btpcm: btpcm gpio ftm-btpcm-din no 68
1505[ 8.187519] c2 273 [AUD] snd_soc_msm8996: msm8994_init_ftm_btpcm: btpcm gpio ftm-btpcm-clock no 65
1506[ 8.187534] c2 273 [AUD] snd_soc_msm8996: msm8994_init_ftm_btpcm: btpcm gpio ftm-btpcm-sync no 66
1507[ 8.187550] c2 273 [AUD] snd_soc_msm8996: htc_msm8996_parse_gpio: gpio rcv-amp-gpio-en no 31
1508[ 8.189011] c2 273 msm8996-asoc-snd soc:sound-9335: ASoC: platform (null) not registered
1509[ 8.190811] c2 1 [KEY] keycode = 115, gpio = 126, irq = 481
1510[ 8.190834] c2 1 [KEY] keycode = 116, gpio = 40, irq = 395
1511[ 8.190922] c2 1 [KEY] keycode = 114, gpio = 121, irq = 476
1512[ 8.190922] c2 1 input: gpio-keys as /devices/soc/soc:gpio_keys/input/input4
1513[ 8.191855] c2 273 [AUD] snd_soc_msm8996: uart_gpios_init done
1514[ 8.191857] c2 273 [AUD] snd_soc_msm8996: aud,uart-disable-mbhc is not set
1515[ 8.191863] c2 273 msm8996-asoc-snd soc:sound-9335: property qcom,tfa9888-reset-gpio not detected in node /soc/sound-9335
1516[ 8.191898] c2 273 [AUD] snd_soc_msm8996: msm8994_init_ftm_btpcm: btpcm gpio ftm-btpcm-dout no 67
1517[ 8.191914] c2 273 [AUD] snd_soc_msm8996: msm8994_init_ftm_btpcm: btpcm gpio ftm-btpcm-din no 68
1518[ 8.191930] c2 273 [AUD] snd_soc_msm8996: msm8994_init_ftm_btpcm: btpcm gpio ftm-btpcm-clock no 65
1519[ 8.191946] c2 273 [AUD] snd_soc_msm8996: msm8994_init_ftm_btpcm: btpcm gpio ftm-btpcm-sync no 66
1520[ 8.191962] c2 273 [AUD] snd_soc_msm8996: htc_msm8996_parse_gpio: gpio rcv-amp-gpio-en no 31
1521[ 8.193596] c2 273 msm8996-asoc-snd soc:sound-9335: ASoC: platform (null) not registered
1522[ 8.202028] c2 1 qcom,qpnp-rtc qpnp-rtc-8: setting system clock to 1970-01-01 05:57:55 UTC (21475)
1523[ 8.203637] c2 273 [AUD] snd_soc_msm8996: uart_gpios_init done
1524[ 8.203639] c2 273 [AUD] snd_soc_msm8996: aud,uart-disable-mbhc is not set
1525[ 8.203645] c2 273 msm8996-asoc-snd soc:sound-9335: property qcom,tfa9888-reset-gpio not detected in node /soc/sound-9335
1526[ 8.203683] c2 273 [AUD] snd_soc_msm8996: msm8994_init_ftm_btpcm: btpcm gpio ftm-btpcm-dout no 67
1527[ 8.203699] c2 273 [AUD] snd_soc_msm8996: msm8994_init_ftm_btpcm: btpcm gpio ftm-btpcm-din no 68
1528[ 8.203715] c2 273 [AUD] snd_soc_msm8996: msm8994_init_ftm_btpcm: btpcm gpio ftm-btpcm-clock no 65
1529[ 8.203731] c2 273 [AUD] snd_soc_msm8996: msm8994_init_ftm_btpcm: btpcm gpio ftm-btpcm-sync no 66
1530[ 8.203747] c2 273 [AUD] snd_soc_msm8996: htc_msm8996_parse_gpio: gpio rcv-amp-gpio-en no 31
1531[ 8.205190] c2 273 msm8996-asoc-snd soc:sound-9335: ASoC: platform (null) not registered
1532[ 8.208006] c0 273 [AUD] snd_soc_msm8996: uart_gpios_init done
1533[ 8.208009] c0 273 [AUD] snd_soc_msm8996: aud,uart-disable-mbhc is not set
1534[ 8.208017] c0 273 msm8996-asoc-snd soc:sound-9335: property qcom,tfa9888-reset-gpio not detected in node /soc/sound-9335
1535[ 8.208116] c0 273 [AUD] snd_soc_msm8996: msm8994_init_ftm_btpcm: btpcm gpio ftm-btpcm-dout no 67
1536[ 8.208141] c0 273 [AUD] snd_soc_msm8996: msm8994_init_ftm_btpcm: btpcm gpio ftm-btpcm-din no 68
1537[ 8.208165] c0 273 [AUD] snd_soc_msm8996: msm8994_init_ftm_btpcm: btpcm gpio ftm-btpcm-clock no 65
1538[ 8.208186] c0 273 [AUD] snd_soc_msm8996: msm8994_init_ftm_btpcm: btpcm gpio ftm-btpcm-sync no 66
1539[ 8.208207] c0 273 [AUD] snd_soc_msm8996: htc_msm8996_parse_gpio: gpio rcv-amp-gpio-en no 31
1540[ 8.210079] c2 1 parse_cpu_levels: idx 1 545
1541[ 8.210080] c2 1 parse_cpu_levels: idx 2 6022
1542[ 8.210081] c2 1 parse_cpu_levels: idx 2 11499
1543[ 8.210115] c2 1 parse_cpu_levels: idx 1 545
1544[ 8.210115] c2 1 parse_cpu_levels: idx 2 6022
1545[ 8.210116] c2 1 parse_cpu_levels: idx 2 11499
1546[ 8.210170] c0 273 msm8996-asoc-snd soc:sound-9335: ASoC: platform (null) not registered
1547[ 8.216443] c0 273 [AUD] snd_soc_msm8996: uart_gpios_init done
1548[ 8.216446] c0 273 [AUD] snd_soc_msm8996: aud,uart-disable-mbhc is not set
1549[ 8.216455] c0 273 msm8996-asoc-snd soc:sound-9335: property qcom,tfa9888-reset-gpio not detected in node /soc/sound-9335
1550[ 8.216552] c0 273 [AUD] snd_soc_msm8996: msm8994_init_ftm_btpcm: btpcm gpio ftm-btpcm-dout no 67
1551[ 8.216578] c0 273 [AUD] snd_soc_msm8996: msm8994_init_ftm_btpcm: btpcm gpio ftm-btpcm-din no 68
1552[ 8.216600] c0 273 [AUD] snd_soc_msm8996: msm8994_init_ftm_btpcm: btpcm gpio ftm-btpcm-clock no 65
1553[ 8.216622] c0 273 [AUD] snd_soc_msm8996: msm8994_init_ftm_btpcm: btpcm gpio ftm-btpcm-sync no 66
1554[ 8.216644] c0 273 [AUD] snd_soc_msm8996: htc_msm8996_parse_gpio: gpio rcv-amp-gpio-en no 31
1555[ 8.218355] c2 1 [FLT] qpnp_flash_led_probe: ++
1556[ 8.218486] c2 1 [FLT] flash_strobe = 22
1557[ 8.218503] c2 1 qcom,qpnp-flash-led qpnp-flash-led-25: Unable to acquire pinctrl
1558[ 8.218667] c0 273 msm8996-asoc-snd soc:sound-9335: ASoC: platform (null) not registered
1559[ 8.219226] c2 1 [FLT] qpnp_flash_led_probe: --
1560[ 8.220119] c0 273 [AUD] snd_soc_msm8996: uart_gpios_init done
1561[ 8.220122] c0 273 [AUD] snd_soc_msm8996: aud,uart-disable-mbhc is not set
1562[ 8.220129] c0 273 msm8996-asoc-snd soc:sound-9335: property qcom,tfa9888-reset-gpio not detected in node /soc/sound-9335
1563[ 8.220222] c0 273 [AUD] snd_soc_msm8996: msm8994_init_ftm_btpcm: btpcm gpio ftm-btpcm-dout no 67
1564[ 8.220247] c0 273 [AUD] snd_soc_msm8996: msm8994_init_ftm_btpcm: btpcm gpio ftm-btpcm-din no 68
1565[ 8.220270] c0 273 [AUD] snd_soc_msm8996: msm8994_init_ftm_btpcm: btpcm gpio ftm-btpcm-clock no 65
1566[ 8.220292] c0 273 [AUD] snd_soc_msm8996: msm8994_init_ftm_btpcm: btpcm gpio ftm-btpcm-sync no 66
1567[ 8.220313] c0 273 [AUD] snd_soc_msm8996: htc_msm8996_parse_gpio: gpio rcv-amp-gpio-en no 31
1568[ 8.220488] c2 1 rmnet_ipa started initialization
1569[ 8.220493] c2 1 IPA SSR support = True
1570[ 8.220494] c2 1 IPA ipa-loaduC = True
1571[ 8.220495] c2 1 IPA SG support = True
1572[ 8.222279] c2 1 ipa ipa_sps_irq_control_all:937 EP (5) not allocated.
1573[ 8.222281] c2 1 ipa ipa2_uc_state_check:301 uC is not loaded
1574[ 8.222342] c0 273 msm8996-asoc-snd soc:sound-9335: ASoC: platform (null) not registered
1575[ 8.223037] c2 1 rmnet_ipa completed initialization
1576[ 8.224318] c1 273 [AUD] snd_soc_msm8996: uart_gpios_init done
1577[ 8.224321] c1 273 [AUD] snd_soc_msm8996: aud,uart-disable-mbhc is not set
1578[ 8.224328] c1 273 msm8996-asoc-snd soc:sound-9335: property qcom,tfa9888-reset-gpio not detected in node /soc/sound-9335
1579[ 8.224407] c1 273 [AUD] snd_soc_msm8996: msm8994_init_ftm_btpcm: btpcm gpio ftm-btpcm-dout no 67
1580[ 8.224432] c1 273 [AUD] snd_soc_msm8996: msm8994_init_ftm_btpcm: btpcm gpio ftm-btpcm-din no 68
1581[ 8.224454] c1 273 [AUD] snd_soc_msm8996: msm8994_init_ftm_btpcm: btpcm gpio ftm-btpcm-clock no 65
1582[ 8.224473] c1 273 [AUD] snd_soc_msm8996: msm8994_init_ftm_btpcm: btpcm gpio ftm-btpcm-sync no 66
1583[ 8.224493] c1 273 [AUD] snd_soc_msm8996: htc_msm8996_parse_gpio: gpio rcv-amp-gpio-en no 31
1584[ 8.226029] c2 1 qcom,cc-debug-8996 362000.qcom,cc-debug: Registered debug mux.
1585[ 8.226260] c1 273 msm8996-asoc-snd soc:sound-9335: ASoC: platform (null) not registered
1586[ 8.226870] c2 1 apc0_pwrcl_mem_acc_corner: disabling
1587[ 8.226872] c2 1 apc1_perfcl_mem_acc_corner: disabling
1588[ 8.226874] c2 1 apcc_l3_mem_acc_corner: disabling
1589[ 8.226875] c2 1 gfx_mem_acc_corner: disabling
1590[ 8.226877] c2 1 kryo0-retention: disabling
1591[ 8.226880] c2 1 kryo1-retention: disabling
1592[ 8.226930] c2 1 gdsc_mmagic_bimc: disabling
1593[ 8.226931] c2 1 rome_vreg: disabling
1594[ 8.226981] c2 1 usb_otg_vreg: disabling
1595[ 8.226985] c2 1 regulator_proxy_consumer_remove_all: removing regulator proxy consumer requests
1596[ 8.227366] c2 1 clock_late_init: Removing enables held for handed-off clocks
1597[ 8.227777] c1 273 [AUD] snd_soc_msm8996: uart_gpios_init done
1598[ 8.227779] c1 273 [AUD] snd_soc_msm8996: aud,uart-disable-mbhc is not set
1599[ 8.227785] c1 273 msm8996-asoc-snd soc:sound-9335: property qcom,tfa9888-reset-gpio not detected in node /soc/sound-9335
1600[ 8.227911] c1 273 [AUD] snd_soc_msm8996: msm8994_init_ftm_btpcm: btpcm gpio ftm-btpcm-dout no 67
1601[ 8.227937] c1 273 [AUD] snd_soc_msm8996: msm8994_init_ftm_btpcm: btpcm gpio ftm-btpcm-din no 68
1602[ 8.227958] c1 273 [AUD] snd_soc_msm8996: msm8994_init_ftm_btpcm: btpcm gpio ftm-btpcm-clock no 65
1603[ 8.227979] c1 273 [AUD] snd_soc_msm8996: msm8994_init_ftm_btpcm: btpcm gpio ftm-btpcm-sync no 66
1604[ 8.228000] c1 273 [AUD] snd_soc_msm8996: htc_msm8996_parse_gpio: gpio rcv-amp-gpio-en no 31
1605[ 8.229824] c1 273 msm8996-asoc-snd soc:sound-9335: ASoC: platform (null) not registered
1606[ 8.230969] c2 1 ALSA device list:
1607[ 8.230971] c2 1 No soundcards found.
1608[ 8.346974] c1 273 dwc3 dwc3_msm_notify_attached_source: id_state = 1
1609[ 8.552234] c1 365 SMBCHG: smbchg_parallel_usb_en_work: AICL at 1700
1610[ 8.552261] c1 365 SMBCHG: smbchg_is_parallel_usb_ok: Not in fast charge, skipping
1611[ 8.552263] c1 365 SMBCHG: smbchg_relax: relaxing: 0x00 (bit 1)
1612[ 8.709333] c1 268 of_batterydata_get_best_profile: Find batterydata path: qcom,m1-id1-batterydata, id_ohm=33320, raw_min=0, raw_max=16000.
1613[ 8.709337] c1 268 of_batterydata_get_best_profile: Find qcom,m1-id2-batterydata, id_ohm=33320, raw_min=27501, raw_max=40000.
1614[ 8.709346] c1 268 FG: fg_batt_profile_init: batt_full_chcriteria_ma = 345
1615[ 8.709348] c1 268 FG: fg_batt_profile_init: batt_fcc_ma = 3400
1616[ 8.709349] c1 268 FG: fg_batt_profile_init: batt_capacity_mah = 3450
1617[ 8.709351] c1 268 FG: fg_batt_profile_init: fcc_half_capacity_ma = 1600
1618[ 8.713134] c1 268 SMBCHG: battchg_suspend: 0 voting for 0 - on
1619[ 8.820846] c0 4 SMBCHG: battchg_suspend: 1 voting for 0 - on
1620[ 8.820854] c0 4 SMBCHG: smbchg_external_power_changed: usb type = 4, current_limit = 0, rc = 0
1621[ 8.820857] c0 4 SMBCHG: smbchg_stay_awake: staying awake: 0x02 (bit 2)
1622[ 8.820860] c0 4 SMBCHG: smbchg_vfloat_adjust_check: Starting vfloat adjustments
1623[ 8.820944] c0 4 SMBCHG: smbchg_relax: relaxing: 0x00 (bit 2)
1624[ 8.995556] c1 273 dwc3 dwc3_msm_notify_attached_source: id_state = 1
1625[ 9.055570] c1 365 SMBCHG: smbchg_parallel_usb_en_work: AICL at 1700
1626[ 9.055596] c1 365 SMBCHG: smbchg_is_parallel_usb_ok: Not in fast charge, skipping
1627[ 9.246812] c0 273 dwc3 dwc3_msm_notify_attached_source: id_state = 1
1628[ 9.905548] c0 273 dwc3 dwc3_msm_notify_attached_source: id_state = 1
1629[ 10.715773] c1 424 of_batterydata_get_best_profile: Find batterydata path: qcom,m1-id1-batterydata, id_ohm=33320, raw_min=0, raw_max=16000.
1630[ 10.715777] c1 424 of_batterydata_get_best_profile: Find qcom,m1-id2-batterydata, id_ohm=33320, raw_min=27501, raw_max=40000.
1631[ 10.715786] c1 424 FG: fg_batt_profile_init: batt_full_chcriteria_ma = 345
1632[ 10.715788] c1 424 FG: fg_batt_profile_init: batt_fcc_ma = 3400
1633[ 10.715789] c1 424 FG: fg_batt_profile_init: batt_capacity_mah = 3450
1634[ 10.715791] c1 424 FG: fg_batt_profile_init: fcc_half_capacity_ma = 1600
1635[ 10.719664] c1 424 SMBCHG: battchg_suspend: 0 voting for 0 - off
1636[ 10.725269] c1 424 FG: fg_batt_profile_init: Battery SOC: 100, V: 4318059uV
1637[ 10.725272] c1 424 [BATT] Probe process: (1, 3)
1638[ 10.725284] c1 424 [BATT] htc_battery_probe_process: catch name 2, set batt id=2, full_ma=345, fcc_ma=3400, capacity=3450, half_capacity_ma:1600, pd_is_limited:0, batt_eoc_current_ma:100
1639[ 10.725284] c1 424 [BATT] Probe process done.
1640[ 10.725 10.725472] c1 18 SMBCHG: smbchg_external_power_changed: usb type = 4, current_limit = 0, rc = 0
1641[ 10.725476] c1 18 SMBCHG: smbchg_stay_awake: staying awake: 0x02 (bit 2)
1642[ 10.725478] c1 18 SMBCHG: smbchg_vfloat_adjust_check: Starting vfloat adjustments
1643[ 10.725611] c1 425 SMBCHG: smbchg_relax: relaxing: 0x00 (bit 2)
1644[ 10.728294] c0 275 [BATT] read_batt_cycle_info: (read from devtree) g_batt_first_use_time = 0, g_overheat_55_sec = 0, g_total_level_raw = 0, g_batt_cycle_checksum = 0
1645[ 10.728296] c0 275 [BATT] read_batt_cycle_info: Checksum 298] c0 275 [BATT] read_batt_cycle_info: g_batt_first_use_time = 21478, g_overheat_55_sec = 0, g_total_level_raw = 0
1646[ 10.728303] c0 275 [BATT] calculate_batt_cycle_info: g_ba_sec = 0, g_total_level_raw = 0
1647[ 10.728305] c0 275 [BATT] calculate_batt_cycle_info: save batt cycle data every 50%
1648[ 10.728324] c0 275 [BATT] batt_check_consistent: magic_num=0x0, level_raw=100, store_soc=0, current_time:21478, store_time=0, batt_temp=287, store_temp=0, consistent_flag=0 at 10719468983 (1970-01-01 05:57:58.035132544 UTC)
1649[ 10.728326] c0 275 [BATT] pre_level=100,pre_raw_level=100 to store difference between UI & SOC. store_level:0, prev_level:100, raw_level:100
1650[ 10.728336] c0 275 [BATT] write battery data: level:100, 78 at 10719480650 (1970-01-01 05:57:58.035146502 UTC)
1651[ 10.728337] c0 275 ignore the fist time on boot.
1652[ 10.728675] c0 422 SMBCHG: smbchg_cc_esr_wa_check: Not in fast charge, skipping
1653[ 10.728680] c0 422 SMBCHG: smbchg_external_power_changed: usb type = 4, current_limit = 0, rc = 0
1654[ 10.728682] c0 422 SMBCHG: smbchg_stay_awake: staying awake: 0x02 (bit 2)
1655[ 10.728685] c0 422 SMBCHG: smbchg_vfloat_adjust_check: Starting vfloat adjustments
1656[ 10.728734] c0 422 SMBCHG: smbchg_relax: relaxing: 0x00 (bit 2)
1657[ 10.744971] c0 275 [BATT][SMBCHG] 0x1010=00,0x1210=00,0x1242=00,0x1310=04,0x1340=10,0x1608=10,0x1610=00,cc=0uAh,warm_temp=470,cool_temp=100,pmic=rev1.1,sink_current=1,pd_chgr=0,wake_reason=0,smb_curr=12mA,batfet_wa=0
1658[ 10.745120] c0 275 [BATT][SMBCHG] CHG_STS[0B:0F]=[02,2e,97,42,08,00,08],BAT_CFG[F0:F5]=[0f,04,06,c5,00,03],BAT_CFG[F6:FB]=[03,3b,2a,04,c8,41]
1659[ 10.746839] c0 275 [BATT][SMBCHG] USB_STS[07:0B]=[10,02,1:0F]=[00,08,0f,ff],USB_CFG[F0:F5]=[0f,02,07,04,11,ab],MISC_CFG[F0:F4]=[0f,00,12,04,25],MISC_CFG[F5:F9]=[38,18,91,e0,00],MISC_CFG[FA:FF]=[00,03,22,04,e0,02],SMB1351[00:06]=[02,1c,87,ef,08,11,6b,],[32]=[00]
1660[ 10.748200] c0 275 [BATT] ID=2,level=100,level_raw=100,voeason=0,chg_stop_reason=0,consistent=-1,flag=0x00000000,AICL=1700mA,htc_ext=0x00,usb_temp=271,usb_overheat=0,level_accu=0 at 10739344870 (1970-01-01 05:57:58.054990983 UTC)
1661[ 10.748204] c0 275 [BATT] Device is at booting stage at 1 10766776800 (1970-01-01 05:57:58.082442653 UTC)
1662[ 10.775661] c1 424 [BATT] chg_full_check_worker: vol:4318, curr=53, is_full_count=0, is_full=0 at 10766806227 (1970-01-01 05:57:58.082470569 UTC)
1663[ 10.778098] c0 275 [BATT] set_batt_psy_property. value(0)0 (1970-01-01 05:57:58.084907445 UTC)
1664[ 10.778192] c0 275 [BATT] calculate_batt_cycle_info: g_batt_first_use_time = 1970-01-01 05:57:58, g_overheat_55_sec = 0, g_total_level_raw = 0
1665[ 10.778193] c0 275 [BATT] calculate_batt_cycle_info: savery 50%
1666[ 10.778204] c0 275 [BATT] set charging_current(500000) at 10769349040 (1970-01-01 05:57:58.085015153 UTC)
1667[ 10.778218] c0 275 [BATT] ibat_max=3400000,ibat_new=1600000,prev_vol_limit=1,prev_ibat_health=1,chg_limit_reason=0,prev_screen_warm=0,prev_screen_hot=0,is_over_ibat=0,htc_batt_info.state=0x0 at 10769362894 (1970-01-01 05:57:58.085027340 UTC)
1668[ 10.778222] c0 275 [BATT] set ibat max(1600000),ibat_tota778226] c0 275 [BATT] set_batt_psy_property. value(1600000) prop(32) at 10769371332 (1970-01-01 05:57:58.085037601 UTC)
1669[ 10.778228] c0 275 SMBCHG: smbchg_set_fastchg_current_useCHG: fcc: 1 voting for 1600 - on
1670[ 10.778298] c0 275 SMBCHG: smbchg_set_fastchg_current_raw: fastcharge current requested 1600, set to 1600
1671[ 10.778300] c0 275 SMBCHG: smbchg_stay_awake: staying awake: 0x01 (bit 1)
1672[ 10.778306] c0 275 [BATT] set charging_enable(1) at 10769451228 (1970-01-01 05:57:58.085117653 UTC)
1673[ 10.778309] c0 275 [BATT] set_batt_psy_property. value(1) prop(68) at 10769454665 (1970-01-01 05:57:58.085120986 UTC)
1674[ 10.778313] c0 275 [BATT] set pwrsrc_enable(1) at 10769458207 (1970-01-01 05:57:58.085124736 UTC)
1675[ 10.778316] c0 275 [BATT] set_batt_psy_property. value(1) prop(69) at 10769461332 (1970-01-01 05:57:58.085127809 UTC)
1676[ 10.778598] c0 422 SMBCHG: smbchg_external_power_changed: usb type = 4, current_limit = 500, rc = 0
1677[ 10.778599] c0 422 SMBCHG: usb_icl: 0 voting for 500 - on
1678[ 10.778602] c0 422 SMBCHG: smbchg_set_usb_current_max: USB current_ma = 500
1679[ 10.778604] c0 422 SMBCHG: usb_suspend: 2 voting for 0 - off
1680[ 10.778739] c0 386 SMBCHG: power_ok_handler: triggered: 0x01. prev_dischg_time_ms(0) dischg_time_ms(21470042) diff(21470042) count_same_dischg(0) limit_iusb(0)
1681[ 10.778769] c0 422 SMBCHG: smbchg_set_usb_current_max: us 10.778784] c0 422 SMBCHG: smbchg_vfloat_adjust_check: Starting vfloat adjustments
1682[ 10.780919] c0 275 [BATT][SMBCHG] 0x1010=00,0x1210=00,0x1340=10,0x1608=10,0x1610=00,cc=0uAh,warm_temp=470,cool_temp=100,pmic=rev1.1,sink_current=1,pd_chgr=0,wake_reason=1,smb_curr=12mA,batfet_wa=0
1683[ 10.781069] c0 275 [BATT][SMBCHG] CHG_STS[0B:0F]=[02,2e,8CHG_CFG[FA:FF]=[1c,47,42,38,00,08],BAT_CFG[F0:F5]=[0f,04,06,c5,00,03],BAT_CFG[F6:FB]=[03,3b,2a,04,c8,41]
1684[ 10.782380] c0 275 [BATT][SMBCHG] USB_STS[07:0B]=[10,02,2SB_CFG[F0:F5]=[0f,02,07,04,11,ab],MISC_CFG[F0:F4]=[0f,00,12,04,25],MISC_CFG[F5:F9]=[38,18,91,e0,00],MISC_CFG[FA:FF]=[00,03,22,04,e0,02],SMB1351[00:06]=[02,1c,87,ef,08,11,6b,],[32]=[00]
1685[ 10.783704] c0 275 [BATT] ID=2,level=100,level_raw=100,vousb=500mA,chg_limit_reason=0,chg_stop_reason=0,consistent=-1,flag=0x00000000,AICL=1700mA,htc_ext=0x00,usb_temp=271,usb_overheat=0,level_accu=0 at 10774849093 (1970-01-01 05:57:58.090496455 UTC)
1686[ 10.783708] c0 275 [BATT] Device is at booting stage at 1me = 1970-01-01 05:57:58, g_overheat_55_sec = 0, g_total_level_raw = 0
1687[ 10.831793] c0 275 [BATT] calculate_batt_cycle_info: savecycle data every 50%
1688[ 10.831802] c0 275 SMBCHG: pmi8994_set_float_voltage_comp: set vfloat comp = 0
1689[ 10.831857] c0 275 [BATT] ibat_max=3400000,ibat_new=1600000,prev_vol_limit=1,prev_ibat_health=1,chg_limit_reason=0,prev_screen_warm=0,prev_screen_hot=0,is_over_ibat=0,htc_batt_info.state=0x0 at 10823001389 (1970-01-01 05:57:58.138664846 UTC)
1690[ 10.831861] c0 275 [BATT] ibat_total=1600000[1600000,0],iT][SMBCHG] 0x1010=00,0x1210=00,0x1242=00,0x1310=04,0x1340=02,0x1608=10,0x1610=01,cc=0uAh,warm_temp=470,cool_temp=100,pmic=rev1.1,sink_current=1,pd_chgr=0,wake_reason=1,smb_curr=12mA,batfet_wa=0
1691[ 10.834578] c0 275 [BATT][SMBCHG] CHG_STS[0B:0F]=[02,6e,8,04,06,c5,00,03],BAT_CFG[F6:FB]=[03,3b,2a,04,c8,41]
1692[ 10.835873] c0 275 [BATT][SMBCHG] USB_STS[07:0B]=[10,02,22,08,08],USB_STS[0C:0F]=[00,08,0f,ff],USB_CFG[F0:F5]=[0f,02,07,04,11,ab],MISC_CFG[F0:F4]=[0f,00,12,04,25],MISC_CFG[F5:F9]=[38,18,91,e0,00],MISC_CFG[FA:FF]=[00,03,22,04,e0,02],SMB1351[00:06]=[02,1c,87,ef,08,11,6b,],[32]=[00]
1693[ 10.837193] c0 275 [BATT] ID=2,level=100,level_raw=100,voeason=0,consistent=-1,flag=0x00000000,AICL=1700mA,htc_ext=0x00,usb_temp=272,usb_overheat=0,level_accu=0 at 10828338056 (1970-01-01 05:57:58.143985992 UTC)
1694[ 10.837197] c0 275 [BATT] Device is at booting stage at 1_handler: p2f triggered
1695[ 10.883569] c0 371 SMBCHG: smbchg_vfloat_adjust_check: Starting vfloat adjustments
1696[ 11.278895] c0 422 SMBCHG: smbchg_parallel_usb_en_work: AICL at 1700
1697[ 11.278921] c0 422 SMBCHG: smbchg_is_parallel_usb_ok: SDP adapter, skipping
1698[ 11.278924] c0 422 SMBCHG: smbchg_relax: relaxing: 0x00 (bit 1)
1699[ 11.747797] c0 0 FG: fg_vbatt_low_handler: vbatt-low triggered
1700[ 11.747854] c0 427 SMBCHG: smbchg_external_power_changed: usb type = 4, current_limit = 500, rc = 0
1701[ 11.747857] c0 427 SMBCHG: smbchg_stay_awake: staying awake: 0x02 (bit 2)
1702[ 11.747859] c0 427 SMBCHG: smbchg_vfloat_adjust_check: Starting vfloat adjustments
1703[ 11.748045] c0 4 SMBCHG: smbchg_relax: relaxing: 0x00 (bit 2)
1704[ 11.782225] c0 422 SMBCHG: smbchg_parallel_usb_en_work: AICL at 1700
1705[ 11.782250] c0 422 SMBCHG: smbchg_is_parallel_usb_ok: SDP adapter, ⸮[ 12.119035] c3 26 sched: RT throttling activated for rt_rq 0000000000000000 (cpu 3)
1706[ 12.119035] c3 26 potential CPU hogs:
1707[ 12.119035] c3336] c2 1 Freeing unused kernel memory: 496K
1708[ 12.139352] c2 1 Freeing alternatives memory: 108K
1709+ exec
1710[ 12.164198] c0 1 qpnp_led.red: b:00 on:0 off:0
1711[ 12.168157] c0 1 qpnp_led.green: b:00 on:0 off:0
1712[ 12.173183] c3 1 qpnp_led.blue: b:ff on:50 off:0
1713[ 14.600723] c2 658 EXT4-fs (sda35): couldn't mount as ext3 due to feature incompatibilities
1714[ 14.608586] c2 658 EXT4-fs (sda35): couldn't mount as ext2 due to feature incompatibilities
1715[ 14.618903] c2 658 EXT4-fs (sda35): mounted filesystem with ordered data mode. Opts: (null)
1716[ 14.819991] c0 1 enable_store: android_usb: already disabled
1717[ 14.829412] c0 1 dwc3 6a00000.dwc3: request 0000000000000000 was not queued to ep0out
1718[ 14.837986] c0 1 rndis_function_bind_config: rndis_function_bind_config MAC: 00:00:00:00:00:00
1719[ 14.846415] c0 1 android_usb gadget: using random self ethernet address
1720[ 14.853080] c3 1 android_usb gadget: using random host ethernet address
1721[ 14.860350] c3 1 rndis0: MAC d2:1d:f9:e7:dc:b8
1722[ 14.864939] c3 1 rndis0: HOST MAC b2:39:25:87:52:15
1723[ 14.874535] c0 862 IPv6: ADDRCONF(NETDEV_UP): rndis0: link is not ready
1724[ 14.897678] c0 866 random: init-debug urandom read with 127 bits of entropy available
1725[ 15.156479] c0 0 dwc3 dwc3_gadget_conndone_interrupt: usb conn speed = 3
1726[ 15.228432] android_work: [USB] android_work: sw_suspended 0, suspended 0 config 0,connect2pc 0
1727[ 15.236108] c0 422 android_work: [USB] android_work: sw_connected 0, connected 0 last_uevent 0
1728[ 15.244986] c0 422 android_work: android_work: did not send uevent (0 0 0000000000000000)
1729[ 15.253417] android_work: [USB] android_work: sw_suspended 0, suspended 0 config 0,connect2pc 0
1730[ 15.261908] c0 422 android_work: [USB] android_work: sw_connected 0, connected 0 last_uevent 0
1731[ 15.270944] c0 422 android_work: android_work: did not send uevent (0 0 0000000000000000)
1732[ 15.283357] c0 0 dwc3 dwc3_gadget_conndone_interrupt: usb conn speed = 3
1733[ 15.368367] android_work: [USB] android_work: sw_suspended 0, suspended 0 config 0,connect2pc 0
1734[ 15.375884] c0 422 android_work: [USB] android_work: sw_connected 0, connected 1 last_uevent 0
1735[ 15.385029] c0 422 android_work: android_work: sent uevent USB_STATE=CONNECTED
1736[ 15.392438] c0 422 android_work: [USB] android_work: set usb_connect2pc = 1
1737[ 15.401470] c0 0 android_usb gadget: high-speed config #1: 66bf0c8.android_usb
1738[ 15.408185] c0 0 msm-dwc3 6a00000.ssusb: Avail curr from USB = 500
1739[ 15.414755] c0 422 IPv6: ADDRCONF(NETDEV_CHANGE): rndis0: link becomes ready
1740[ 15.422150] c0 422 SMBCHG: smbchg_external_power_changed: usb type = 4, current_limit = 500, rc = 0
1741[ 15.431362] c0 422 SMBCHG: smbchg_stay_awake: staying awake: 0x02 (bit 2)
1742[ 15.438316] c0 422 SMBCHG: smbchg_vfloat_adjust_check: Starting vfloat adjustments
1743[ 15.446154] android_work: [USB] android_work: sw_suspended 0, suspended 0 config 1,connect2pc 1
1744[ 15.454663] c0 422 android_work: [USB] android_work: sw_connected 1, connected 1 last_uevent 1
1745[ 15.463854] c0 4 SMBCHG: smbchg_relax: relaxing: 0x00 (bit 2)
1746[ 15.469989] c0 4 random: nonblocking pool is initialized
1747[ 15.515557] c0 422 android_work: android_work: sent uevent USB_STATE=CONFIGURED
1748[ 15.953861] c0 880 EXT4-fs (sda35): re-mounted. Opts: (null)
1749[ 15.969300] c3 1 preinit: (15.96) Welcome to Sailfish OS 3.0.2.8 (Oulanka)
1750[ 15.993138] c0 1 preinit: (15.98) is_erase_needed: No : 0
1751[ 16.025903] c1 1 preinit: (16.01) get_bootstate: USER : 0
1752[ 16.031296] c1 1 preinit: (16.02) BOOTSTATE = USER
1753[ 16.038705] c1 1 preinit: (16.02) Booting to default.target
1754[ 16.074261] c3 1 systemd[1]: systemd 225 running in system mode. (+PAM -AUDIT -SELINUX +IMA -APPARMOR +SMACK -SYSVINIT +UTMP -LIBCRYPTSETUP +GCRYPT -GNUTLS +ACL +XZ -LZ4 -SECCOMP +BLKID -ELFUTILS +KMOD -IDN)
1755[ 16.092392] c3 1 systemd[1]: Detected architectur⸮
1756Wel[ 16.107178] c2 1 systemd[1]: Set hostname to <Sailfish>.
1757[ 17.033989] c0 900 ufshcd 624000.ufshc: ufshcd_ioctl: User buffer is NULL!
1758[ 17.125321] c2 1 systemd[1]: sys-fs-pstore.mount: Cannot create mount unit for API file system /sys/fs/pstore. Refusing.
1759[ 17.140436] c2 1 systemd[1]: data.mount: Unit is bound to inactive unit dev-sda35.device. Stopping, too.
1760[ 17.174329] c3 1 systemd[1]: sys-fs-pstore.mount: Cannot add dependency job, ignoring: Unit sys-fs-pstore.mount failed to load: Invalid argument. See system logs and 'systemctl status sys-fs-pstore.mount' for details.
1761[ 17.196136] c3 1 systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
1762[ 17.216148] c3 1 systemd[1]: Created slice Ro⸮⸮⸮5⸮j⸮ OK [0m] Created slice Root Slice.
1763[ 17.225946] c3 1 systemd[1]: Created slice Syst⸮⸮⸮⸮&⸮ z-⸮ [0m] Created slice System Slice.
1764[ 17.235908] c3 1 systemd[1]: Created slice User and Sessi⸮⸮⸮⸮&⸮ z-⸮ [0m] Created slice User and Session Slice.
1765[ 17.252282] c3 1 systemd[1]: Reached targe[[32m OK [0m] Reached target Slices.
1766[ 17.262424] c3 1 systemd[1]: Listening on Journa[[32m OK [0m] Listening on Journal Socket.
1767[ 17.273628] c3 1 systemd[1]: Starting Create list of required static device nodes for the current ⸮ Starting Create list of required st... nodes for the current kernel...
1768[ 17.293384] c3 1 systemd[1]: Mounting Droid mount for /ing Droid mount for /dev/stune...
1769[ 17.310032] c3 1 systemd[1]: Mounting FFS mount...
1770[ 17.314111] c0 908 ffs_data_put()⸮ Mounting FFS mount...
1771[ 17.326719] c3 1 systemd[1]: Mounting Droid mount for /dev/⸮ Mounting Droid mount for /dev/cpuctl...
1772[ 17.343487] c3 1 systemd[1]: Starting Remount Root and Kernel File S⸮ Starting Remount Root and Kernel File Systems...
1773[ 17.360272] c3 1 systemd[1]: Starting Setup Virtual Co Starting Setup Virtual Console...
1774[ 17.375729] c3 1 systemd[1]: Listening on Journal Socket (/dev/log).
1775[ 17.377355] c2 913 EXT4-fs (sda35): re-mounted. Opts:⸮[[32m OK [0m] Listening on Journal Socket (/dev/log).
1776[ 17.399157] c3 1 systemd[1]: Listening on udev Kernel⸮[[32m OK [0m] Listening on udev Kernel Socket.
1777[ 17.415802] c3 1 systemd[1]: Listening on /dev/initctl Compatibility Na⸮[[32m OK [0m] Listening on /dev/initctl Compatibility Named Pipe.
1778[ 17.439385] c3 1 systemd[1]: Starting Journal S⸮ Starting Journal Service...
1779[ 17.453484] c3 1 systemd[1]: Mounting Debug File ⸮ Mounting Debug File System...
1780[ 17.465800] c2 1 systemd[1]: tmp.mount: Directory /tmp to mount over is not empty, mounting anyway.
1781[ 17.475573] c2 1 systemd[1]: Mounting Temporary Dire⸮ Mounting Temporary Directory...
1782[ 17.489096] c2 1 systemd[1]: Listening on udev Contro⸮[[32m OK [0m] Listening on udev Control Socket.
1783[ 17.505800] c2 1 systemd[1]: Started Forward Password Requests to Wall Directo⸮[[32m OK [0m] Started Forward Password Requests to Wall Directory Watch.
1784[ 17.526069] c2 1 systemd[1]: Created slice system-serial\x2dgett[[32m OK [0m] Created slice system-serial\x2dgetty.slice.
1785[ 17.543031] c1 1 systemd[1]: Mounting Droid mount for /dev/cpuset...
1786[ 17.546127] c0 931 cgroup: new mount options do not match the existing superblock, will be⸮ Mounting Droid mount for /dev/cpuset...
1787[ 17.565684] c1 1 systemd[1]: Reached tar⸮[[32m OK [0m] Reached target Swap.
1788[ 17.580121] c1 1 systemd[1]: Mounted Debug File⸮[[32m OK [0m] Mounted Debug File System.
1789[ 17.595766] c1 1 systemd[1]: Mounted Temporary Di⸮⸮⸮⸮&⸮ z-⸮ [0m] Mounted Temporary Directory.
1790[ 17.605779] c1 1 systemd[1]: Mounted Droid mount for /de⸮[[32m OK [0m] Mounted Droid mount for /dev/cpuset.
1791[ 17.622357] c1 1 systemd[1]: Mounted Droid mount for /d⸮[[32m OK [0m] Mounted Droid mount for /dev/stune.
1792[ 17.639458] c1 1 systemd[1]: Started Journal [[32m OK [0m] Started Journal Service.
1793[[32m OK [0m] Started Create list of required sta...ce nodes for the current kernel.
1794[[1;31mFAILED[0m] Failed to mount FFS mount.
1795See 'systemctl status dev-mtp.mount' for details.
1796[[1;31mFAILED[0m] Failed to mount Droid mount for /dev/cpuctl.
1797See 'systemctl status dev-cpuctl.mount' for details.
1798[[32m OK [0m] Started Remount Root and Kernel File Systems.
1799[[32m OK [0m] Started Setup Virtual Console.
1800 Starting Clean RPM db region files at each reboot...
1801 Starting Load/Save Random Seed...
1802 Starting udev Coldplug all Devices...
1803 Starting Create Static Device Nodes in /dev...
1804 Starting Flush Journal to Persistent Storage...
1805[[32m OK [0m] Started Clean RPM db region files at each reboot.
1806[[32m OK [0m] Started Load/Save Random Seed.
1807[[32m OK [0m] Started Create Static Device Nodes in /dev.
1808[ 17.963010] c2 924 systemd-journald[924]: Received request to flush runtime journal from PID 1
1809[[32m OK [0m] Started Flush Journal to Persistent Storage.
1810 Starting udev Kernel Device Manager...
1811[[32m OK [0m] Reached target Local File Systems (Pre).
1812 Mounting Droid mount for /mnt...
1813[[32m OK [0m] Mounted Droid mount for /mnt.
1814[[32m OK [0m] Started udev Kernel Device Manager.
1815 Mounting FUSE Control File System...
1816 Mounting Configuration File System...
1817 Starting Apply Kernel Variables...
1818[[32m OK [0m] Mounted FUSE Control File System.
1819[[32m OK [0m] Mounted Configuration File System.
1820[[32m OK [0m] Started Apply Kernel Variables.
1821[[32m OK [0m] Started udev Coldplug all Devices.
1822 Starting udev Wait for Complete Device Initialization...
1823[ 18.863176] c1 965 ufshcd 624000.ufshc: ufshcd_ioctl: User buffer is NULL!
1824[ 18.870134] c3 948 ufshcd 624000.ufshc: ufshcd_ioctl: User buffer is NULL!
1825[ 18.876443] c0 964 ufshcd 624000.ufshc: ufshcd_ioctl: User buffer is NULL!
1826[ 18.877446] c3 987 ufshcd 624000.ufshc: ufshcd_ioctl: User buffer is NULL!
1827[ 18.894559] c2 966 ufshcd 624000.ufshc: ufshcd_ioctl: User buffer is NULL!
1828[ 18.897167] c0 949 ufshcd 624000.ufshc: ufshcd_ioctl: User buffer is NULL!
1829[ 18.902671] c3 958 ufshcd 624000.ufshc: ufshcd_ioctl: User buffer is NULL!
1830[ 18.909242] c3 969 ufshcd 624000.ufshc: ufshcd_ioctl: User buffer is NULL!
1831[ 18.911601] c3 948 ufshcd 624000.ufshc: ufshcd_ioctl: User buffer is NULL!
1832[ 18.913993] c3 962 ufshcd 624000.ufshc: ufshcd_ioctl: User buffer is NULL!
1833[ 18.916147] c3 951 ufshcd 624000.ufshc: ufshcd_ioctl: User buffer is NULL!
1834[ 18.930577] c1 952 ufshcd 624000.ufshc: ufshcd_ioctl: User buffer is NULL!
1835[ 18.930579] c0 948 ufshcd 624000.ufshc: ufshcd_ioctl: User buffer is NULL!
1836[ 18.931105] c0 965 ufshcd 624000.ufshc: ufshcd_ioctl: User buffer is NULL!
1837[ 18.939765] c3 955 ufshcd 624000.ufshc: ufshcd_ioctl: User buffer is NULL!
1838[ 18.941944] c0 949 ufshcd 624000.ufshc: ufshcd_ioctl: User buffer is NULL!
1839[ 18.942944] c1 964 ufshcd 624000.ufshc: ufshcd_ioctl: User buffer is NULL!
1840[ 18.944100] c3 969 ufshcd 624000.ufshc: ufshcd_ioctl: User buffer is NULL!
1841[ 18.949967] c3 958 ufshcd 624000.ufshc: ufshcd_ioctl: User buffer is NULL!
1842[ 18.954209] c3 950 ufshcd 624000.ufshc: ufshcd_ioctl: User buffer is NULL!
1843[ 18.955777] c3 988 ufshcd 624000.ufshc: ufshcd_ioctl: User buffer is NULL!
1844[ 18.956496] c3 987 ufshcd 624000.ufshc: ufshcd_ioctl: User buffer is NULL!
1845[ 18.958910] c3 957 ufshcd 624000.ufshc: ufshcd_ioctl: User buffer is NULL!
1846[ 18.959132] c0 962 ufshcd 624000.ufshc: ufshcd_ioctl: User buffer is NULL!
1847[ 18.967362] c3 951 ufshcd 624000.ufshc: ufshcd_ioctl: User buffer is NULL!
1848[ 18.976009] c1 964 ufshcd 624000.ufshc: ufshcd_ioctl: User buffer is NULL!
1849[ 18.976875] c0 988 ufshcd 624000.ufshc: ufshcd_ioctl: User buffer is NULL!
1850[ 18.989352] c0 948 ufshcd 624000.ufshc: ufshcd_ioctl: User buffer is NULL!
1851[ 18.996837] c3 969 ufshcd 624000.ufshc: ufshcd_ioctl: User buffer is NULL!
1852[ 19.000067] c3 949 ufshcd 624000.ufshc: ufshcd_ioctl: User buffer is NULL!
1853[ 19.002040] c0 950 ufshcd 624000.ufshc: ufshcd_ioctl: User buffer is NULL!
1854[ 19.003526] c3 951 ufshcd 624000.ufshc: ufshcd_ioctl: User buffer is NULL!
1855[ 19.015335] c0 964 ufshcd 624000.ufshc: ufshcd_ioctl: User buffer is NULL!
1856[ 19.015427] c1 988 ufshcd 624000.ufshc: ufshcd_ioctl: User buffer is NULL!
1857[ 19.025824] c0 952 ufshcd 624000.ufshc: ufshcd_ioctl: User buffer is NULL!
1858[ 19.026470] c3 965 ufshcd 624000.ufshc: ufshcd_ioctl: User buffer is NULL!
1859[ 19.031019] c0 948 ufshcd 624000.ufshc: ufshcd_ioctl: User buffer is NULL!
1860[ 19.031921] c3 964 ufshcd 624000.ufshc: ufshcd_ioctl: User buffer is NULL!
1861[ 19.040615] c3 988 ufshcd 624000.ufshc: ufshcd_ioctl: User buffer is NULL!
1862[ 19.050667] c3 948 ufshcd 624000.ufshc: ufshcd_ioctl: User buffer is NULL!
1863[ 19.051659] c3 952 ufshcd 624000.ufshc: ufshcd_ioctl: User buffer is NULL!
1864[ 19.051796] c3 964 ufshcd 624000.ufshc: ufshcd_ioctl: User buffer is NULL!
1865[ 19.064093] c0 964 FG: fg_vbatt_low_handler: vbatt-low triggered
1866[ 19.064164] c0 4 SMBCHG: smbchg_external_power_changed: usb type = 4, current_limit = 500, rc = 0
1867[ 19.064167] c0 4 SMBCHG: smbchg_stay_awake: staying awake: 0x02 (bit 2)
1868[ 19.064170] c0 4 SMBCHG: smbchg_vfloat_adjust_check: Starting vfloat adjustments
1869[ 19.079061] c3 962 ufshcd 624000.ufshc: ufshcd_ioctl: User buffer is NULL!
1870[ 19.079403] c0 422 SMBCHG: smbchg_relax: relaxing: 0x00 (bit 2)
1871[ 19.081799] c3 948 ufshcd 624000.ufshc: ufshcd_ioctl: User buffer is NULL!
1872[ 19.082384] c0 950 ufshcd 624000.ufshc: ufshcd_ioctl: User buffer is NULL!
1873[ 19.086508] c0 951 ufshcd 624000.ufshc: ufshcd_ioctl: User buffer is NULL!
1874[ 19.094754] c0 952 ufshcd 624000.ufshc: ufshcd_ioctl: User buffer is NULL!
1875[ 19.099269] c0 988 ufshcd 624000.ufshc: ufshcd_ioctl: User buffer is NULL!
1876[ 19.102454] c0 957 ufshcd 624000.ufshc: ufshcd_ioctl: User buffer is NULL!
1877[ 19.109661] c0 965 ufshcd 624000.ufshc: ufshcd_ioctl: User buffer is NULL!
1878[ 19.110184] c3 964 ufshcd 624000.ufshc: ufshcd_ioctl: User buffer is NULL!
1879[ 19.125636] c3 964 ufshcd 624000.ufshc: ufshcd_ioctl: User buffer is NULL!
1880[ 19.129443] c3 956 ufshcd 624000.ufshc: ufshcd_ioctl: User buffer is NULL!
1881[ 19.140247] c3 956 ufshcd 624000.ufshc: ufshcd_ioctl: User buffer is NULL!
1882[ 19.146671] c0 965 ufshcd 624000.ufshc: ufshcd_ioctl: User buffer is NULL!
1883[ 19.152768] c3 948 ufshcd 624000.ufshc: ufshcd_ioctl: User buffer is NULL!
1884[ 19.154252] c1 951 ufshcd 624000.ufshc: ufshcd_ioctl: User buffer is NULL!
1885[ 19.155416] c0 950 ufshcd 624000.ufshc: ufshcd_ioctl: User buffer is NULL!
1886[ 19.160840] c0 952 ufshcd 624000.ufshc: ufshcd_ioctl: User buffer is NULL!
1887[ 19.164543] c3 988 ufshcd 624000.ufshc: ufshcd_ioctl: User buffer is NULL!
1888[ 19.175302] c3 962 ufshcd 624000.ufshc: ufshcd_ioctl: User buffer is NULL!
1889[ 19.179882] c0 964 ufshcd 624000.ufshc: ufshcd_ioctl: User buffer is NULL!
1890[ 19.235154] c1 948 ufshcd 624000.ufshc: ufshcd_ioctl: User buffer is NULL!
1891[ 19.264658] c1 948 ufshcd 624000.ufshc: ufshcd_ioctl: User buffer is NULL!
1892[ 19.269783] c1 988 ufshcd 624000.ufshc: ufshcd_ioctl: User buffer is NULL!
1893[ 19.274537] c3 965 ufshcd 624000.ufshc: ufshcd_ioctl: User buffer is NULL!
1894[ 19.279024] c3 955 ufshcd 624000.ufshc: ufshcd_ioctl: User buffer is NULL!
1895[ 19.279998] c0 952 ufshcd 624000.ufshc: ufshcd_ioctl: User buffer ⸮[[32m OK [0m] Created slice system-mount\x2dsd.slice.
1896 Mounting Droid mount for /dev/cpuctl...
1897 Starting Clean RPM db region files at each reboot...
1898 Mounting FFS mount...
1899[[1;31mFAILED[0m[ 19.427753] c3 2001 ffs_data_put(): freeing
1900] Failed to mount Droid mount for /dev/cpuctl.
1901See 'systemctl status dev-cpuctl.mount' for details.
1902[[32m OK [0m] Started Clean RPM db region files at each reboot.
1903[[1;31mFAILED[0m] Failed to mount FFS mount.
1904See 'systemctl status dev-mtp.mount' for details.
1905[[32m OK [0m] Found device KLUBG4G1CE-B0B1 vendor.
1906[[32m OK [0m] Found device KLUBG4G1CE-B0B1 /.
1907[[32m OK [0m] Found device /dev/ttyHSL0.
1908 Mounting /system_raw...
1909 Mounting /vendor...
1910[ 19.666302] c1 2210 EXT4-fs (sda33): mounted filesystem with ordered data mode. Opts: (null)
1911[[32m OK [0m] Mounted /system_raw.
1912[ 19.697880] c2 2222 EXT4-fs (sda31): warning: mounting unchecked fs, running e2fsck is recommended
1913[ 19.712745] c2 2222 EXT4-fs (sda31): mounted filesystem without journal. Opts: (null)
1914[[32m OK [0m] Mounted /vendor.
1915[[32m OK [0m] Reached target Local File Systems.
1916 Starting Create Volatile Files and Directories...
1917[[32m OK [0m] Listening on Nemo device lock socket.
1918[[32m OK [0m] Listening on D-Bus System Message Bus Socket.
1919 Starting D-Bus System Message Bus...
1920 Starting StateFS FUSE filesystem, system-wide...
1921 Starting Mode Control Entity (MCE)...
1922[[32m OK [0m] Started Create Volatile Files and Directories.
1923[ 19.848895] [BATT] set charging_current(500000), PC connected at 19848742809 (1970-01-01 05:58:07.155705796 UTC)
1924[ 19.862674] c0 4 SMBCHG: smbchg_external_power_changed: usb type = 4, current_limit = 500, rc = 0
1925[[32m OK [0m] Started D-Bus System Message Bus.
1926[ 19.885594] c0 4 SMBCHG: smbchg_stay_awake: staying awake: 0x02 (bit 2)
1927[ 19.911302] c0 4 SMBCHG: smbchg_vfloat_adjust_check: Starting vfloat adjustments
1928[ 19.920906] c0 4 SMBCHG: smbchg_relax: relaxing: 0x00 (bit 2)
1929[[32m OK [0m] Started StateFS FUSE filesystem, system-wide.
1930[ 20.044644] c2 2372 qpnp_led.red: b:00 on:50 off:0
1931[ 20.048670] c2 2372 qpnp_led.green: b:00 on:50 off:0
1932[ 20.048727] c2 2372 qpnp_led.blue: b:00 on:50 off:0
1933[ 20.049859] c2 2372 qpnp_led.red: b:00 on:50 off:0
1934[ 20.049918] c2 2372 qpnp_led.green: b:00 on:50 off:0
1935[ 20.049975] c2 2372 qpnp_led.blue: b:00 on:50 off:0
1936[ 20.050053] c2 2372 qpnp_led.red: b:00 on:50 off:0
1937[ 20.050111] c2 2372 qpnp_led.green: b:00 on:50 off:0
1938[ 20.050168] c2 2372 qpnp_led.blue: b:00 on:50 off:0
1939[ 20.062039] c2 2372 qpnp_led.red: b:00 on:50 off:0
1940[ 20.062107] c2 2372 qpnp_led.green: b:00 on:50 off:0
1941[ 20.062165] c2 2372 qpnp_led.blue: b:00 on:50 off:0
1942[ 20.062270] c2 2372 qpnp_led.red: b:00 on:50 off:0
1943[ 20.062328] c2 2372 qpnp_led.green: b:00 on:50 off:0
1944[ 20.062386] c2 2372 qpnp_led.blue: b:00 on:50 off:0
1945[ 20.062461] c2 2372 qpnp_led.red: b:00 on:50 off:0
1946[ 20.062518] c2 2372 qpnp_led.green: b:00 on:50 off:0
1947[ 20.062575] c2 2372 qpnp_led.blue: b:00 on:50 off:0
1948[ 20.092607] c2 2372 qpnp_led.red: b:00 on:50 off:0
1949[ 20.092670] c2 2372 qpnp_led.green: b:00 on:50 off:0
1950[ 20.092728] c2 2372 qpnp_led.blue: b:00 on:50 off:0
1951[ 20.092804] c2 2372 qpnp_led.red: b:00 on:50 off:0
1952[ 20.092861] c2 2372 qpnp_led.green: b:00 on:50 off:0
1953[ 20.092918] c2 2372 qpnp_led.blue: b:00 on:50 off:0
1954[ 20.092992] c2 2372 qpnp_led.red: b:00 on:50 off:0
1955[ 20.093050] c2 2372 qpnp_led.green: b:00 on:50 off:0
1956[ 20.093107] c2 2372 qpnp_led.blue: b:00 on:50 off:0
1957[ 20.102864] c2 2372 qpnp_led.red: b:ff on:500 off:2500
1958[ 20.103092] c2 2372 qpnp_led.green: b:ff on:500 off:2500
1959[ 20.103313] c2 2372 qpnp_led.blue: b:ff on:500 off:2500
1960[ 20.106649] c2 2372 qpnp_led.red: b:ff on:500 off:2500
1961[ 20.107888] c2 2372 qpnp_led.green: b:ff on:500 off:2500
1962[ 20.109142] c2 2372 qpnp_led.blue: b:ff on:500 off:2500
1963[ 20.113484] c2 2372 qpnp_led.red: b:ff on:500 off:2500
1964[ 20.114720] c2 2372 qpnp_led.green: b:ff on:500 off:2500
1965[ 20.115961] c2 2372 qpnp_led.blue: b:ff on:500 off:2500
1966[ 20.133718] c2 2372 qpnp_led.red: b:00 on:50 off:0
1967[ 20.134795] c2 2372 qpnp_led.green: b:00 on:50 off:0
1968[ 20.135940] c2 2372 qpnp_led.blue: b:00 on:50 off:0
1969[ 20.137031] c2 2372 qpnp_led.red: b:00 on:50 off:0
1970[ 20.137090] c2 2372 qpnp_led.green: b:00 on:50 off:0
1971[ 20.137148] c2 2372 qpnp_led.blue: b:00 on:50 off:0
1972[ 20.137225] c2 2372 qpnp_led.red: b:00 on:50 off:0
1973[ 20.137284] c2 2372 qpnp_led.green: b:00 on:50 off:0
1974[ 20.137343] c2 2372 qpnp_led.blue: b:00 on:50⸮[[32m OK [0m] Started Mode Control Entity (MCE).
1975 Starting Get initial bootstate...
1976 Starting Update UTMP about System Boot/Shutdown...
1977[[32m OK [0m] Started Get initial bootstate.
1978[ 20.417017] c1 2372 qpnp_led.red: b:bf on:50 off:0
1979[ 20.421261] c1 2372 qpnp_led.green: b:bf on:50 off:0
1980[[32m OK [0m] Started Update UTMP about System Boot/Shutdown.
1981[ 20.432028] c1 2372 qpnp_led.blue: b:bf on:50 off:0
1982[ 20.444616] c1 2372 qpnp_led.red: b:bf on:50 off:0
1983[ 20.462007] c1 2372 qpnp_led.green: b:bf on:50 of⸮ Starting DSME...
1984[ 20.469504] c1 2372 qpnp_led.blue: b:bf on:50 off:0
1985[ 20.478285] c1 2372 qpnp_led.red: b:bf on:50 off:0
1986[ 20.491040] c1 2372 qpnp_led.green: b:bf on:50 off:0
1987[ 20.496482] c1 2372 qpnp_led.blue: b:bf on:50 off:0
1988[[32m OK [0m] Started DSME.
1989[[32m OK [0m] Started udev Wait for Complete Device Initialization.
1990 Starting droid-hal-init...
1991 Starting usb-moded USB gadget controller...
1992[[32m OK [0m] Reached target System Initialization.
1993[[32m OK [0m] Started Wayland path watcher.
1994[ 20.680473] c1 3015 droid-hal-init: init first stage started!
1995[ 20.683300] c0 3018 dwc3 6a00000.dwc3: request 0000000000000000 was not queued to ep0out
1996[ 20.693788] c1 3015 droid-hal-init: Skipped setting INIT_AVB_VERSION (not in recovery mode)
1997[ 20.703401] c2 3015 droid-hal-init: init second stage started!
1998[ 20.708541] c0 3018 [RMNET:HI] rmnet_config_notify_cb(): Kernel is trying to unregister rndis0
1999[[32m OK [0m] Reached target Paths.
2000[ 20.723056] c2 3015 droid-hal-init: Using Android DT directory /proc/device-tree/firmware/android/
2001[ 20.734770] c2 3015 droid-hal-init: Running restorecon...
2002[ 20.735577] c0 3018 [RMNET:HI] rmnet_config_notify_cb(): Kernel is trying to unregister rndis0
2003[ 20.748707] c3 3015 droid-hal-init: waitid failed: No child processes
2004[ 20.757101] c3 3015 droid-hal-init: Couldn't load property file: Unable to open '/odm/default.prop': No such file or directory: No such file or directory
2005[ 20.772182] c1 3015 droid-hal-init: property_set("ro.dalvige", "0") failed: property already set
2006[ 20.781807] c2 3015 droid-hal-init: Created socket '/dev/socket/property_service', mode 666, user 0, group 0
2007[ 20.791651] c3 3015 droid-hal-init: Parsing file /init.rc...
2008[ 20.799499] c2 3015 droid-hal-init: property 'ro.product.cpu.abi' doesn't exist while expanding '/init.extraenv.${ro.product.cpu.abi}.rc'
2009[ 20.811027] c2 3015 droid-hal-init: /init.rc: 11: error whimport
2010[ 20.818422] c2 3015 droid-hal-init: Added '/init.environ.rc' to im[ 20.825557] c2 3015 droid-hal-init: Added '/init.marlin.rc' to import list
2011[[32m OK [0m] Listening on OpenSSH Server Socket.
2012[ 20.8-hal-init: Added '/vendor/etc/init/hw/init.marlin.rc' to import list
2013[ 20.845106] c2 3015 droid-hal-init: Added '/init.zygote64_32.rc' to import list
2014[ 20.845613] c0 3021 rndis_function_bind_config: rndis_function_bind_config MAC: D2:7C:A6:3A:9E:74
2015[ 20.845648] c0 3021 android_usb gadget: using random self ethernet address
2016[ 20.845650] c0 3021 android_usb gadget: using previous host ethernet address
2017[ 20.846008] c0 3021 rndis0: MAC a6:15:b7:aa:cb:53
2018[ 20.846010] c0 3021 rndis0: HOST MAC b2:39:25:87:52:15
2019[ 20.859691] c0 3029 IPv6: ADDRCONF(NETDEV_UP): rndis0: link is not ready
2020[ 20.893544] c3 3015 droid-hal-init: Parsing file /init.environ.rc...
2021[ 20.899650] c2 3015 droid-hal-init: Parsing file /init.marlin.rc...
2022[ 20.905753] c2 3015 droid-hal-init: Unable to open '/init.marlin.rc': No such file or directory
2023[ 20.914592] c2 3015 droid-hal-init: /init.rc: 15: Could not import file '/init.marlin.rc': No such file or directo⸮[[32m OK [0m] Reached target Sockets.
2024[ 20.926928] c3 3015 droid-hal-init: Parsing file /vendor/e 20.936862] c3 3015 droid-hal-init: Unable to open '/vendor/etc/init/hw/init.marlin.rc': No such file or directory
2025[ 20.947324] c3 3015 droid-hal-init: /init.rc: 16: Could no No such file or directory
2026[ 20.952462] c0 0 dwc3_gadget_suspend_interrupt(): state:0. Ignore SUSPEND.
2027[ 20.966953] c3 3015 droid-hal-init: Parsing file /init.zygote64_32.rc...
2028[ 20.973811] c3 3015 droid-hal-init: Unable to open '/init.zygote64_32.rc': No such file or directory
2029[ 20.983084] c3 3015 droid-hal-init: /init.rc: 17: Could not import file '/init.zygote64_32.rc': No such file or directory
2030[ 20.996082] c3 3015 droid-hal-init: Parsing directory /usr/libexec/droid-hybris/system/et⸮[[32m OK [0m[ 21.004574] c3 3015 droid-hal-init: Parsing file /usr/libexec/droid-hybris/system/etc/init/android.hardware.keymaster@3.0-service-qti.rc...
2031] Started Daily Cleanup of Temporary Directories.
2032[ 21.01908 21.034637] c3 3015 droid-hal-init: Parsing file /usr/libexec/droid-hybris/system/etc/init/cameraserver.rc...
2033[ 21.045511] c3 3015 droid-hal-init: Parsing file /usr/libexec/droid-hybris/system/etc/init/hwservicemanager.rc...
2034[ 21.056631] c3 3015 droid-hal-init: Parsing file /usr/libexec/droid-hybris/system/etc/init/keystore.rc...
2035[ 21.065716] c3 3015 droid-hal-init: Parsing file /usr/libexec/droid-hybris/system/etc/init/mediaserver.rc...
2036[ 21.075708] c3 3015 droid-hal-init: Parsing file /usr/libexec/droid-hybris/system/etc/init/netd.rc...
2037[ 21.078383] c0 0 msm-dwc3 6a00000.ssusb: Avail curr from USB = 0
2038[ 21.078454] c0 4 SMBCHG: smbchg_external_power_changed: usb type = 4, current_limit = 0, rc = 0
2039[ 21.078457] c0 4 SMBCHG: usb_icl: 0 voting for 0 - on
2040[ 21.078459] c0 4 SMBCHG: smbchg_set_usb_current_max: USB current_ma = 0
2041[ 21.078461] c0 4 SMBCHG: usb_suspend: 2 voting for 0 - on
2042[ 21.078487] c0 4 SMBCHG: smbchg_set_usb_current_max: usb type = 4 current set to 0 mA
2043[ 21.078558] c0 386 SMBCHG: power_ok_handler: triggered: 0x00.
2044[ 21.078566] c0 4 SMBCHG: smbchg_stay_awake: staying awake: 0x01 (bit 1)
2045[ 21.078569] c0 4 SMBCHG: smbchg_vfloat_adjust_check: Starting vfloat adjustments
2046[ 21.078630] c0 4 android_work: [USB] android_work: sw_suspended 0, suspended 0 config 0,connect2pc 1
2047[ 21.078631] c0 4 android_work: [USB] android_work: sw_connected 1, connected 0 last_uevent 2
2048[ 21.078657] c0 4 android_work: android_work: sent uevent USB_STATE=DISCONNECTED
2049[ 21.078658] c0 4 android_work: [USB] android_work: set usb_connect2pc = 0
2050[ 21.078659] c0 4 android_work: android_work: OS_NOT_YET
2051[ 21.078775] c0 422 [BATT] cancel chg_full_check_work when plug out.
2052[ 21.078924] c0 427 [BATT] charger_exist_lock Unlock at 21070069076 (2019-03-13 08:17:33.564607087 UTC)
2053[ 21.081322] c2 277 [BATT] set_batt_psy_property. value(0) prop(89) at 21072468035 (2019-03-13 08:17:33.567005473 UTC)
2054[ 21.081325] c2 277 [BATT] calculate_batt_cycle_info: g_batt_first_use_time modify!
2055[ 21.081329] c2 277 [BATT] calculate_batt_cycle_info: g_batt_first_use_time = 2019-03-13 08:17:33, g_overheat_55_sec = 0, g_total_level_raw = 0
2056[ 21.081330] c2 277 [BATT] calculate_batt_cycle_info: savery 50%
2057[ 21.081331] c2 277 [BATT] batt_level_adjust: Cable plug out when level 100, reset timer.
2058[ 21.081605] c2 1994 SMBCHG: smbchg_external_power_changed: usb type = 4, current_limit = 0, rc = 0
2059[ 21.081607] c2 1994 SMBCHG: smbchg_vfloat_adjust_check: Starting vfloat adjustments
2060[ 21.082463] c0 371 SMBCHG: fastchg_handler: p2f triggered
2061[ 21.082469] c0 371 SMBCHG: smbchg_vfloat_adjust_check: Starting vfloat adjustments
2062[ 21.083928] c2 277 [BATT][SMBCHG] 0x1010=10,0x1210=00,0x1242=00,0x1310=04,0x1340=12,0x1608=10,0x1610=00,cc=0uAh,warm_temp=470,cool_temp=100,pmic=rev1.1,sink_current=1,pd_chgr=0,wake_reason=1,smb_curr=12mA,batfet_wa=0
2063[ 21.084112] c2 277 [BATT][SMBCHG] CHG_STS[0B:0F]=[02,2e,87,42,38,00,08],BAT_CFG[F0:F5]=[0f,04,06,c5,00,03],BAT_CFG[F6:FB]=[03,3b,2a,04,c8,41]
2064[ 21.085876] c2 277 [BATT][SMBCHG] USB_STS[07:0B]=[10,02,2:0F]=[00,08,0f,ff],USB_CFG[F0:F5]=[0f,02,07,04,11,ab],MISC_CFG[F0:F4]=[0f,00,12,04,25],MISC_CFG[F5:F9]=[38,18,91,e0,00],MISC_CFG[FA:FF]=[00,03,22,04,e0,02],SMB1351[00:06]=[02,1c,87,ef,08,11,6b,],[32]=[00]
2065[ 21.087297] c1 277 [BATT] ID=2,level=100,level_raw=100,voeason=0,chg_stop_reason=0,consistent=-1,flag=0x00000000,AICL=1700mA,htc_ext=0x00,usb_temp=272,usb_overheat=0,level_accu=0 at 21078440952 (2019-03-13 08:17:33.572956150 UTC)
2066[ 21.087303] c1 277 [BATT] Device is at booting stage at 2pt: usb conn speed = 3
2067[ 21.201714] c0 422 android_work: [USB] android_work: sw_suspended 0, suspended 0 config 0,connect2pc 0
2068[ 21.201714] c0 422 android_work: [USB] android_work: sw_connected 0, connected 1 last_uevent 0
2069[ 21.201783] c0 422 android_work: android_work: sent uevent USB_STATE=CONNECTED
2070[ 21.201785] c0 422 android_work: [USB] android_work: set usb_connect2pc = 1
2071[ 21.205379] c0 422 android_work: [USB] android_work: sw_suspended 0, suspended 0 config 0,connect2pc 1
2072[ 21.205379] c0 422 android_work: [USB] android_work: sw_connected 1, connected 0 last_uevent 1
2073[ 21.205432] c0 422 android_work: android_work: sent uevent USB_STATE=DISCONNECTED
2074[ 21.205433] c0 422 android_work: [USB] android_work: set usb_connect2pc = 0
2075[ 21.205434] c0 422 android_work: android_work: OS_NOT_YET
2076[ 21.256554] c0 0 dwc3 dwc3_gadget_conndone_interrupt: usb conn speed = 3
2077[ 21.341690] c0 422 android_work: [USB] android_work: sw_suspended 0, suspended 0 config 0,connect2pc 0
2078[ 21.341691] c0 422 android_work: [USB] android_work: sw_connected 0, connected 1 last_uevent 0
2079[ 21.341861] c0 422 android_work: android_work: sent uevent USB_STATE=CONNECTED
2080[ 21.341862] c0 422 android_work: [USB] android_work: set usb_connect2pc = 1
2081[ 21.343933] c0 0 android_usb gadget: high-speed config #1: 66bf0c8.android_usb
2082[ 21.344042] c0 0 msm-dwc3 6a00000.ssusb: Avail curr from USB = 500
2083[ 21.344226] c0 422 IPv6: ADDRCONF(NETDEV_CHANGE): rndis0: link becomes ready
2084[ 21.344541] c0 422 SMBCHG: smbchg_external_power_changed: usb type = 4, current_limit = 500, rc = 0
2085[ 21.344545] c0 422 SMBCHG: usb_icl: 0 voting for 500 - on
2086[ 21.344549] c0 422 SMBCHG: smbchg_set_usb_current_max: USB current_ma = 500
2087[ 21.344551] c0 422 SMBCHG: usb_suspend: 2 voting for 0 - off
2088[ 21.344656] c1 386 SMBCHG: power_ok_handler: triggered: 0x01. prev_dischg_time_ms(21470042) dischg_time_ms(266) diff(21469776) count_same_dischg(0) limit_iusb(0)
2089[ 21.344820] c0 422 SMBCHG: smbchg_set_usb_current_max: us1.344835] c0 422 SMBCHG: smbchg_vfloat_adjust_check: Starting vfloat adjustments
2090[ 21.344959] c0 422 android_work: [USB] android_work: sw_sded 0 config 1,connect2pc 1
2091[ 21.344960] c0 422 android_work: [USB] android_work: sw_connected 1, connected 1 last_uevent 1
2092[ 21.346504] c0 3039 [BATT] charger_exist_lock Lock at 21337647853 (2019-03-13 08:17:33.832183520 UTC)
2093[ 21.346545] c0 427 [BATT] chg_full_check_worker: vol:4318, curr=53, is_full_count=0, is_full=0 at 21337690613 (2019-03-13 08:17:33.832227895 UTC)
2094[ 21.349025] c2 277 [BATT] set_batt_psy_property. value(0)7 (2019-03-13 08:17:33.834707583 UTC)
2095[ 21.349031] c2 277 [BATT] calculate_batt_cycle_info: g_batt_first_use_time = 2019-03-13 08:17:33, g_overheat_55_sec = 0, g_total_level_raw = 0
2096[ 21.349032] c2 277 [BATT] calculate_batt_cycle_info: savery 50%
2097[ 21.349041] c2 277 [BATT] set charging_current(500000) at 21340187489 (2019-03-13 08:17:33.834727062 UTC)
2098[ 21.349056] c2 277 [BATT] ibat_max=3400000,ibat_new=1600000,prev_vol_limit=1,prev_ibat_health=1,chg_limit_reason=0,prev_screen_warm=0,prev_screen_hot=0,is_over_ibat=0,htc_batt_info.state=0x0 at 21340201447 (2019-03-13 08:17:33.834738572 UTC)
2099[ 21.349059] c2 277 [BATT] ibat_total=1600000[1600000,0],iT] set charging_enable(1) at 21340209051 (2019-03-13 08:17:33.834748937 UTC)
2100[ 21.349065] c2 277 [BATT] set_batt_psy_property. value(1)t 21340211968 (2019-03-13 08:17:33.834751697 UTC)
2101[ 21.349068] c2 277 [BATT] set pwrsrc_enable(1) at 21340215353 (2019-03-13 08:17:33.834755291 UTC)
2102[ 21.349071] c2 277 [BATT] set_batt_psy_property. value(1) prop(69) at 21340218009 (2019-03-13 08:17:33.834757791 UTC)
2103[ 21.349340] c2 1994 SMBCHG: smbchg_external_power_changed: usb type = 4, current_limit = 500, rc = 0
2104[ 21.349342] c2 1994 SMBCHG: smbchg_vfloat_adjust_check: Starting vfloat adjustments
2105[ 21.351729] c2 277 [BATT][SMBCHG] 0x1010=00,0x1210=00,0x1242=00,0x1310=04,0x1340=02,0x1608=10,0x1610=01,cc=0uAh,warm_temp=470,cool_temp=100,pmic=rev1.1,sink_current=1,pd_chgr=0,wake_reason=1,smb_curr=12mA,batfet_wa=0
2106[ 21.351875] c2 277 [BATT][SMBCHG] CHG_STS[0B:0F]=[02,2e,87,42,38,00,08],BAT_CFG[F0:F5]=[0f,04,06,c5,00,03],BAT_CFG[F6:FB]=[03,3b,2a,04,c8,41]
2107[ 21.353607] c2 277 [BATT][SMBCHG] USB_STS[07:0B]=[10,02,2:0F]=[00,08,0f,ff],USB_CFG[F0:F5]=[0f,02,07,04,11,ab],MISC_CFG[F0:F4]=[0f,00,12,04,25],MISC_CFG[F5:F9]=[38,18,91,e0,00],MISC_CFG[FA:FF]=[00,03,22,04,e0,02],SMB1351[00:06]=[02,1c,87,ef,08,11,6b,],[32]=[00]
2108[ 21.354918] c2 277 [BATT] ID=2,level=100,level_raw=100,voreason=0,chg_stop_reason=0,consistent=-1,flag=0x00000000,AICL=1700mA,htc_ext=0x00,usb_temp=272,usb_overheat=0,level_accu=0 at 21346064468 (2019-03-13 08:17:33.840586802 UTC)
2109[ 21.354921] c2 277 [BATT] Device is at booting stage at 2event USB_STATE=CONFIGURED
2110[ 21.449348] c0 371 SMBCHG: fastchg_handler: p2f triggered
2111[ 21.449358] c0 371 SMBCHG: smbchg_vfloat_adjust_check: Starting vfloat adjustments
2112[ 21.578896] c0 4 SMBCHG: smbchg_parallel_usb_en_work: AICL at 1700
2113[ 21.578923] c0 4 SMBCHG: smbchg_is_parallel_usb_ok: SDP adapter, skipping
2114[ 21.578926] c0 4 SMBCHG: smbchg_relax: relaxing: 0x0⸮[[32m OK [0m] Reached target Timers.
2115[ 21.914345] c3 3015 droid-hal-init: Parsing file /usr/libexec/droid-hybris/system/etc/init/servicemanager.rc...
2116[ 21.924965] c3 3015 droid-hal-init: Parsing file /usr/libexec/droid-hybris/system/etc/init/surfaceflinger.rc...
2117[ 21.936448] c3 3015 droid-hal-init: Parsing file /usr/libexec/droid-hybris/system/etc/init/vndservicemanager.rc...
2118[ 21.948258] c3 3015 droid-hal-init: Parsing file /usr/libexec/droid-hybris/system/etc/init/vold.rc...
2119[ 21.958699] c3 3015 droid-hal-init: Parsing file /usr/libexec/droid-hybris/system/etc/init/wificond.rc...
2120[ 21.968997] c3 3015 droid-hal-init: Parsing directory /system/etc/init...
2121[ 21.975369] c3 3015 droid-hal-init: Parsing file /system/etc/init/android.hidl.allocator@1.0-service.rc...
2122[ 21.986303] c3 3015 droid-hal-init: Parsing file /system/etc/init/atrace.rc...
2123[ 21.992406] c0 0 FG: fg_vbatt_low_handler: vbatt-low triggered
2124[ 21.992466] c0 422 SMBCHG: smbchg_external_power_changed: usb type = 4, current_limit = 500, rc = 0
2125[ 21.992469] c0 422 SMBCHG: smbchg_stay_awake: staying awake: 0x02 (bit 2)
2126[ 21.992471] c0 422 SMBCHG: smbchg_vfloat_adjust_check: Starting vfloat adjustments
2127[ 21.992663] c0 3039 SMBCHG: smbchg_relax: relaxing: 0x0⸮ Starting ohm daemon for resource policy management...[ 22.030077] c2 3015 droid-hal-init: Parsing file /system/etc/init/atrace_userdebug.rc...
2128
2129[ 22.042646] c2 3015 droid-hal-init: Parsing file /systemaudioserver.rc: 1: ignored duplicate definition of service 'audioserver'
2130[ 22.061555] c2 3015 droid-hal-init: Parsing file /system/et/bootanim.rc...
2131[ 22.069425] c2 3015 droid-hal-init: Parsing file /system/etc/init/bootstat.rc...
2132[ 22.077193] c2 3015 droid-hal-init: Parsing file /system/etc/init/cameraserver.rc...
2133[ 22.082229] c0 4 SMBCHG: smbchg_parallel_usb_en_work: AICL at 1700
2134[ 22.082257] c0 4 SMBCHG: smbchg_is_parallel_usb_ok: SDP adapter, skipping
2135[ 22.098872] c2 3015 droid-hal-init: /system/etc/init/cameraserver.rc: 1: ignored duplicate definition of service 'cameraserver'
2136[ 22.109958] c2 3015 droid-hal-init: Parsing file /system/eit/cppreopts.rc...
2137[ 22.119191] c2 3015 droid-hal-init: Parsing file /system/etc/init/drmserver.rc...
2138[ 22.126103] c3 3015 droid-hal-init: Parsing file /system/etc/init/dumpst⸮[[32m OK [0m] Started usb-moded USB gadget controller.
2139[ 22.133827] c3 3015 droid-hal-init: Parsing file /system/eatekeeperd.rc...
2140[ 22.145893] c2 3015 droid-hal-init: Parsing file /system/etc/init/hwservicemanager.rc...
2141[ 22.154142] c2 3015 droid-hal-init: /system/etc/init/hwservicemanager.rc: 1: ignored duplicate definition of service 'hwservicemanager'
2142[ 22.166245] c2 3015 droid-hal-init: Parsing file /system/e-debug.rc...
2143[ 22.175504] c2 3015 droid-hal-init: Parsing file /system/etc/init/installd.rc...
2144[ 22.182436] c2 3015 droid-hal-init: Parsing file /system/etc/init/keystore.rc...
2145[ 22.189829] c3 3015 droid-hal-init: /system/etc/init/keystore.rc: 1: ignored duplicate definition of service 'keystore'
2146[ 22.200567] c3 3015 droid-hal-init: Parsing file /system/etc/init/lineage-adb.rc...
2147[ 22.210033] c3 3015 droid-hal-init: Parsing file /system/etc/init/lineage-governor.rc...
2148[ 22.217792] c3 3015 droid-hal-init: Parsing file /system/etc/init/lineage-iosched.rc...
2149[ 22.225779] c3 3015 droid-hal-init: Parsing file /system/etc/init/lineage-livedisplay.rc...
2150[ 22.234178] c2 3015 droid-hal-init: Parsing file /system/etc/init/lineage-radio.rc...
2151[ 22.242229] c2 3015 droid-hal-init: Parsing file /system/etc/init/lineage-s[[32m OK [0m] Started udhcpcd DHCP server.
2152[ 22.251931] c3 3015 droid-hal-init: Parsing file /system/etc/init/lineage-system.rc...
2153[ 22.262823] c2 3015 droid-hal-init: Parsing file /system/etc/init/lineage-tcp.rc...
2154[ 22.269885] c2 3015 droid-hal-init: Parsing file /system/etc/init/lineage-updates.rc...
2155[ 22.278069] c2 3015 droid-hal-init: Parsing file /system/etc/init/lmkd.rc...
2156[ 22.285237] c2 3015 droid-hal-init: Parsing file /system/etc/init/logcatd.rc...
2157[ 22.294966] c3 3015 droid-hal-init: Parsing file /system/etc/init/logd.rc...
2158[ 22.301547] c3 3015 droid-hal-init: Parsing file /system/etc/init/logtagd.rc...
2159[ 22.309095] c3 3015 droid-hal-init: Parsing file /system/etc/init/mdnsd.rc...
2160[ 22.318224] c2 3015 droid-hal-init: Parsing file /system/etc/init/mediadrmserver.rc...
2161[ 22.325611] c3 3015 droid-hal-init: Parsing file /system/etc/init/mediaextractor.rc...
2162[ 22.334896] c3 3015 droid-hal-init: Parsing file /system/etc/init/mediametrics.rc...
2163[ 22.342113] c3 3015 droid-hal-init: Parsing file /system/etc/init/mediaserver.[[32m OK [0m] Started ohm daemon for resource policy management.
2164[ 22.351738] c3 3015 droid-hal-init: /system/etc/init/mediauplicate definition of service 'media'
2165[ 22.366179] c3 3015 droid-hal-init: Parsing file /system/etc/init/mtpd.rc...
2166[ 22.373714] c2 3015 droid-hal-init: Parsing file /system/etc/init/netd.rc...
2167[ 22.380786] c2 3015 droid-hal-init: /system/etc/init/netd.rc: 1: ignored duplicate definition of service 'netd'
2168[ 22.390799] c2 3015 droid-hal-init: Parsing file /system/etc/init/otapreopt.rc...
2169[ 22.399932] c2 3015 droid-hal-init: Parsing file /system/etc/init/perfprofd.rc...
2170[ 22.406813] c3 3015 droid-hal-init: Parsing file /system/etc/init/racoon.rc...
2171[ 22.414226] c3 3015 droid-hal-init: Parsing file /system/etc/init/recovery-persist.rc...
2172[ 22.425008] c3 3015 droid-hal-init: Parsing file /system/etc/init/recovery-refresh.rc...
2173[ 22.432497] c2 3015 droid-hal-init: Parsing file /system/etc/init/servicemanager.rc...
2174[ 22.440571] c3 3015 droid-hal-init: /system/etc/init/servicemanager.rc: 1: ignored duplicate definition of service 'servicemanager'
2175[ 22.452318] c3 3015 droid-hal-init: Parsing file /system/etoraged.rc...
2176[ 22.461426] c3 3015 droid-hal-init: Parsing file /system/etc/init/surfaceflinger.rc...
2177[ 22.468728] c3 3015 droid-hal-init: /system/etc/init/surfaceflinger.rc: 1: ignored duplicate definition of service 'surfaceflinger'
2178[ 22.480494] c3 3015 droid-hal-init: Parsing file /system/ehermalservice.rc...
2179[ 22.490166] c3 3015 droid-hal-init: Parsing file /system/etc/init/tombstoned.rc...
2180[ 22.497147] c3 3015 droid-hal-init: Parsing file /system/etc/init/uncrypt.rc...
2181[ 22.504615] c3 3015 droid-hal-init: Parsing file /system/etc/init/update_engine.rc...
2182[ 22.514968] c3 3015 droid-hal-init: Parsing file /system/etc/init/update_verifier.rc...
2183[ 22.524884] c3 3015 droid-hal-init: Parsing file /system/etc/init/vdc.rc...
2184[ 22.531230] c3 3015 droid-hal-init: Parsing file /system/etc/init/vold.rc...
2185[ 22.538430] c3 3015 droid-hal-init: /system/etc/init/vold.rc: 3: ignored duplicate definition of service 'vold'
2186[ 22.548460] c3 3015 droid-hal-init: Parsing file /system/etc/init/webview_zygote32.rc...
2187[ 22.558246] c3 3015 droid-hal-init: Parsing file /system/etc/init/webview_zygote64.rc...
2188[ 22.565770] c3 3015 droid-hal-init: Parsing file /system/etc/init/wifi-events.rc...
2189[ 22.573571] c3 3015 droid-hal-init: Parsing file /system/etc/init/wificond.rc...
2190[ 22.581084] c3 3015 droid-hal-init: /system/etc/init/wificond.rc: 1: ignored duplicate definition of service 'wificond'
2191[ 22.591836] c3 3015 droid-hal-init: Parsing directory /vendor/etc/init...
2192[ 22.598911] c3 3015 droid-hal-init: Parsing file /vendor/etc/init/android.hardware.audio@2.0-service.rc...
2193[ 22.610333] c3 3015 droid-hal-init: Parsing file /vendor/etc/init/android.hardware.biometrics.fingerprint@2.1-service.rc...
2194[ 22.620863] c2 3015 droid-hal-init: Parsing file /vendor/ec/init/android.hardware.bluetooth@1.0-service.rc...
2195[ 22.632357] c2 3015 droid-hal-init: Parsing file /vendor/etc/init/android.hardware.boot@1.0-service.rc...
2196[ 22.641313] c3 3015 droid-hal-init: Parsing file /vendor/etc/init/android.hardware.camera.provider@2.4-service.rc...
2197[ 22.653391] c3 3015 droid-hal-init: Parsing file /vendor/etc/init/android.hardware.cas@1.0-service.rc...
2198[ 22.662296] c3 3015 droid-hal-init: Parsing file /vendor/etc/init/android.hardware.configstore@1.0-service.rc...
2199[ 22.674861] c3 3015 droid-hal-init: Parsing file /vendor/etc/init/android.hardware.contexthub@1.0-service.rc...
2200[ 22.685648] c3 3015 droid-hal-init: Parsing file /vendor/etc/init/android.hardware.drm@1.0-service.rc...
2201[ 22.694526] c3 3015 droid-hal-init: Parsing file /vendor/etc/init/android.hardware.drm@1.0-service.widevine.rc...
2202[ 22.706222] c3 3015 droid-hal-init: Parsing file /vendor/etc/init/android.hardware.dumpstate@1.0-service.marlin.rc...
2203[ 22.716226] c2 3015 droid-hal-init: Parsing file /vendor/etc/init/android.hardware.gatekeeper@1.0-service.rc...
2204[ 22.728306] c3 3015 droid-hal-init: Parsing file /vendor/etc/init/android.hardware.gnss@1.0-service.rc...
2205[ 22.738571] c2 3015 droid-hal-init: Parsing file /vendor/etc/init/android.hardware.graphics.allocator@2.0-service.rc...
2206[ 22.750090] c3 3015 droid-hal-init: Parsing file /vendor/etc/init/android.hardware.graphics.composer@2.1-service.rc...
2207[ 22.761592] c3 3015 droid-hal-init: Parsing file /vendor/etc/init/android.hardware.keymaster@3.0-service.rc...
2208[ 22.770999] c3 3015 droid-hal-init: /vendor/etc/init/android.hardware.keymaster@3.0-service.rc: 1: ignored duplicate definition of service 'keymaster-3-0'
2209[ 22.784732] c3 3015 droid-hal-init: Parsing file /vendor/e2.0-service.rc...
2210[ 22.796079] c3 3015 droid-hal-init: Parsing file /vendor/etc/init/android.hardware.media.omx@1.0-service.rc...
2211[ 22.805484] c3 3015 droid-hal-init: Parsing file /vendor/etc/init/android.hardware.memtrack@1.0-service.rc...
2212[ 22.815540] c3 3015 droid-hal-init: Parsing file /vendor/etc/init/android.hardware.nfc@1.0-service.rc...
2213[ 22.825164] c3 3015 droid-hal-init: Parsing file /vendor/etc/init/android.hardware.power@1.1-service.marlin.rc...
2214[ 22.836875] c3 3015 droid-hal-init: Parsing file /vendor/etc/init/android.hardware.sensors@1.0-service.rc...
2215[ 22.846116] c3 3015 droid-hal-init: Parsing file /vendor/etc/init/android.hardware.usb@1.1-service.marlin.rc...
2216[ 22.856354] c3 3015 droid-hal-init: Parsing file /vendor/etc/init/android.hardware.vibrator@1.0-service.marlin.rc...
2217[ 22.866991] c2 3015 droid-hal-init: Parsing file /vendor/etc/init/android.hardware.vr@1.0-service.rc...
2218[ 22.878233] c3 3015 droid-hal-init: Parsing file /vendor/etc/init/android.hardware.wifi@1.0-service.rc...
2219[ 22.888593] c2 3015 droid-hal-init: Parsing file /vendor/etc/init/hostapd.android.rc...
2220[ 22.898310] c3 3015 droid-hal-init: Parsing file /vendor/etc/init/init.diag.rc...
2221[ 22.905187] c3 3015 droid-hal-init: Parsing file /vendor/etc/init/init.nanohub.rc...
2222[ 22.913079] c3 3015 droid-hal-init: Parsing file /vendor/etc/init/init.rc...
2223[ 22.921476] c3 3015 droid-hal-init: /vendor/etc/init/init.rc: 773: ignored duplicate definition of service 'bugreport'
2224[ 22.931454] c3 3015 droid-hal-init: Parsing file /vendor/etc/init/init.usb.rc...
2225[ 22.940648] c3 3015 droid-hal-init: Parsing file /vendor/etc/init/rild.rc...
2226[ 22.947176] c3 3015 droid-hal-init: Parsing file /vendor/etc/init/vndservicemanager.rc...
2227[ 22.955414] c3 3015 droid-hal-init: /vendor/etc/init/vndservicemanager.rc: 1: ignored duplicate definition of service 'vndservicemanager'
2228[ 22.967733] c3 3015 droid-hal-init: Parsing file /odm/etc/2.973951] c3 3015 droid-hal-init: Unable to open '/odm/etc/init': No such file or directory
2229[ 22.982681] c3 3015 droid-hal-init: processing action (ear
2230[ 22.990791] c3 3015 droid-hal-init: processing action (early-init) from (/vendor/etc/init/init.rc:16)
2231[ 23.000079] c3 3015 droid-hal-init: processing action (wait_for_coldboot_done) from (<Builtin Action>:0)
2232[ 23.009659] c3 3015 droid-hal-init: processing action (mix_hwrng_into_linux_rng) from (<Builtin Action>:0)
2233[ 23.019455] c3 3015 droid-hal-init: /dev/hw_random not found
2234[ 23.025252] c3 3015 droid-hal-init: processing action (set_mmap_rnd_bits) from (<Builtin Action>:0)
2235[ 23.034826] c3 3015 droid-hal-init: processing action (set_kptr_restrict) from (<Builtin Action>:0)
2236[ 23.043706] c3 3015 droid-hal-init: processing action (keychord_init) from (<Builtin Action>:0)
2237[ 23.052537] c3 3015 keychord: using input dev qpnp_pon for fevent
2238[ 23.058743] c3 3015 keychord: using input dev HDMI CEC User or Deck Control for fevent
2239[ 23.066831] c3 3015 keychord: using input dev gpio-keys for fevent
2240[ 23.073177] c3 3015 droid-hal-init: processing action (console_init) from (<Builtin Action>:0)
2241[ 23.081956] c3 3015 droid-hal-init: processing action (init) from (/init.rc:41)
2242[ 23.089609] c3 3015 droid-hal-init: loglevel: invalid log level 64
2243[ 23.097660] c3 3015 droid-hal-init: Unable to open '/dev/cpuset/cpus': No such file or directory
2244[ 23.105642] c3 3015 droid-hal-init: Unable to open '/dev/cpuset/mems': No such file or directory
2245[ 23.114615] c3 3015 droid-hal-init: Unable to open '/dev/cpuset/cpus': No such file or directory
2246[ 23.123548] c3 3015 droid-hal-init: Unable to open '/dev/cpuset/mems': No such file or directory
2247[ 23.132495] c3 3015 droid-hal-init: Unable to open '/dev/cpuset/cpus': No such file or directory
2248[ 23.141419] c3 3015 droid-hal-init: Unable to open '/dev/cpuset/mems': No such file or directory
2249[ 23.150401] c3 3015 droid-hal-init: Unable to open '/dev/cpuset/cpus': No such file or directory
2250[ 23.159267] c3 3015 droid-hal-init: Unable to open '/dev/cpuset/mems': No such file or directory
2251[ 23.168768] c3 3015 Registered swp emulation handler
2252[ 23.173362] c3 3015 droid-hal-init: Unable to open '/sys/class/leds/vibrator/trigger': No such file or directory
2253[ 23.183670] c3 3015 droid-hal-init: processing action (init) from (/init.environ.rc:2)
2254[ 23.191775] c3 3015 droid-hal-init: processing action (init) from (/system/etc/init/lineage-iosched.rc:1)
2255[ 23.202336] c3 3015 droid-hal-init: processing action (init) from (/system/etc/init/lineage-system.rc:2)
2256[ 23.211094] c3 3015 droid-hal-init: processing action (init) from (/vendor/etc/init/init.rc:20)
2257[ 23.223306] c2 3015 droid-hal-init: starting service 'qseecomd'...
2258[ 23.229245] c3 3015 droid-hal-init: Unable to open '/dev/cpuset/kernel/cpus': Permission denied
2259[ 23.237521] c3 3015 droid-hal-init: Unable to open '/dev/cpuset/kernel/mems': Permission denied
2260[ 23.246500] c3 3015 droid-hal-init: Unable to open '/dev/cpuset/system/cpus': Permission denied
2261[ 23.255235] c3 3015 droid-hal-init: Unable to open '/dev/cpuset/system/mems': Permission denied
2262[ 23.264196] c3 3015 droid-hal-init: Unable to open '/dev/cpuset/system/performance/cpus': Permission denied
2263[ 23.273982] c3 3015 droid-hal-init: Unable to open '/dev/cpuset/system/performance/mems': Permission denied
2264[ 23.283997] c3 3015 droid-hal-init: Unable to open '/dev/cpuset/system/background/cpus': Permission denied
2265[ 23.293690] c3 3015 droid-hal-init: Unable to open '/dev/cpuset/system/background/mems': Permission denied
2266[ 23.295243] c1 3067 capability: warning: `qseecomd' uses 32-bit capabilities (legacy support in use)
2267[ 23.313028] c3 3015 droid-hal-init: Unable to open '/dev/cpuset/application/cpus': Permission denied
2268[ 23.322256] c3 3015 droid-hal-init: Unable to open '/dev/cpuset/application/mems': Permission denied
2269[ 23.331495] c3 3015 droid-hal-init: Unable to open '/dev/cpuset/application/performance/cpus': Permission denied
2270[ 23.341719] c3 3015 droid-hal-init: Unable to open '/dev/cpuset/application/performance/mems': Permission denied
2271[ 23.352182] c3 3015 droid-hal-init: Unable to open '/dev/cpuset/application/background/cpus': Permission denied
2272[ 23.362262] c3 3015 droid-hal-init: Unable to open '/dev/cpuset/application/background/mems': Permission denied
2273[ 23.372961] c2 3015 droid-hal-init: processing action (init) from (/vendor/etc/init/init.usb.rc:1)
2274[ 23.381690] c2 3015 droid-hal-init: processing action (mix_hwrng_into_linux_rng) from (<Builtin Action>:0)
2275[ 23.391431] c2 3015 droid-hal-init: /dev/hw_random not found
2276[ 23.397249] c2 3015 droid-hal-init: processing action (late-init) from (/init.rc:268)
2277[ 23.405246] c2 3015 droid-hal-init: processing action (queue_property_triggers) from (<Builtin Action>:0)
2278[ 23.414970] c2 3015 droid-hal-init: processing action (ready) from (/init.rc:759)
2279[ 23.422591] c2 3015 droid-hal-init: starting service 'droid_init_done'...
2280[ 23.429897] c2 3015 droid-hal-init: processing action (fs) from (/system/etc/init/logd.rc:18)
2281[ 23.438321] c2 3015 droid-hal-init: processing action (fs) from (/system/etc/init/wifi-events.rc:17)
2282[ 23.447510] c2 3015 droid-hal-init: processing action (fs) from (/vendor/etc/init/init.rc:104)
2283[ 23.456279] c2 3015 droid-hal-init: Parsing file /odm/etc/init...
2284[ 23.462592] c2 3015 droid-hal-init: Unable to open '/odm/etc/init': No such file or d[[32m OK [0m] Started droid-hal-init.
2285[ 23.472008] c2 3015 droid-hal-init: starting service 'hwseemanager'...
2286[ 23.481479] c2 3015 droid-hal-init: processing action (post-fs) from (/init.rc:301)
2287[ 23.481748] c0 3075 droid-hal-init: couldn't write 3075 to /dev/cpuset/system-background/tasks: No space left on device
2288[ 23.500916] c3 3015 droid-hal-init: Couldn't load property file: Unable to open '/odm/build.prop': No such file or directory: No such file or directory
2289[ 23.513996] c3 3015 droid-hal-init: property_set("ro.telep failed: property already set
2290[ 23.524278] c3 3015 droid-hal-init: property_set("ro.vendor.extension_library", "libqti-perfd-client.so") failed: property already set
2291[ 23.536504] c3 3015 droid-hal-init: property_set("ro.openg", "196610") failed: property already set
2292[ 23.546631] c3 3015 droid-hal-init: property_set("ro.qcom.adreno.qgl.ShaderStorageImageExtendedFormats", "0") failed: property already set
2293[ 23.559213] c3 3015 droid-hal-init: property_set("ro.hwui.size", "1") failed: property already set
2294[ 23.569678] c3 3015 droid-hal-init: property_set("ro.hwui.drop_shadow_cache_size", "6") failed: property alre 23.580306] c3 3015 droid-hal-init: property_set("ro.hwui.r_buffer_cache_size", "8") failed: property already set
2295[ 23.589774] c3 3015 droid-hal-init: property_set("ro.hwui.t: property_set("ro.hwui.text_small_cache_width", "1024") failed: property already set
2296[ 23.611650] c3 3015 droid-hal-init: property_set("ro.hwui.ht", "1024") failed: property already set
2297[ 23.622675] c3 3015 droid-hal-init: property_set("ro.hwui.text_large_cache_width", "2048") failed: property already set
2298[ 23.633621] c3 3015 droid-hal-init: property_set("ro.hwui.text_large_cache_height", "1024") failed: property already set
2299[ 23.644655] c3 3015 droid-hal-init: property_set("ro.hardware.power", "marlin") failed: property already set
2300[ 23.654625] c3 3015 droid-hal-init: property_set("ro.qc.sdk.audio.fluencetype", "fluencepro") failed: property already set
2301[[32m OK [0m] Reached target Basic System.
2302[ 23.665965] c3 3015 droid-hal-init: property_set("ro.telephony.default_network", "10") failed: property already set
2303[ 23.680605] c3 3015 droid-hal-init: property_set("ro.bt.bdaddr_path", "/sys/module/bdaddress/parameters/bdaddress") failed: property already set
2304[ 23.693682] c3 3015 droid-hal-init: property_set("ro.cp_sy) failed: property already set
2305[ 23.703752] c3 3015 droid-hal-init: property_set("ro.camera.notify_nfc", "1") failed: property already set
2306[ 23.713558] c3 3015 droid-hal-init: property_set("ro.frp.pst", "/dev/block/platform/soc/624000.ufshc/by-name/frp") failed: property already set
2307[ 23.726599] c3 3015 droid-hal-init: property_set("ro.crypt3:3:1") failed: property already set
2308[ 23.737087] c3 3015 droid-hal-init: property_set("ro.vendor.vndk.version", "26.1.0") failed: property already set
2309[ 23.747502] c3 3015 droid-hal-init: property_set("ro.sf.lcd_density", "560") failed: property already set
2310[ 23.757236] c3 3015 droid-hal-init: property_set("ro.config.vc_call_vol_steps", "7") failed: property already set
2311[ 23.767699] c3 3015 droid-hal-init: property_set("ro.hwui.texture_cache_size", "72") failed: property already set
2312[ 23.767711] c3 3015 droid-hal-init: property_set("ro.hwui.layer_cache_size", "48") failed: property already set
2313[ 23.767721] c3 3015 droid-hal-init: property_set("ro.hwui.path_cache_size", "32") failed: property already set
2314[ 23.767731] c3 3015 droid-hal-init: property_set("ro.adb.secure", "1") failed: property already set
2315[ 23.767741] c3 3015 droid-hal-init: property_set("ro.config.ringtone", "Zen.ogg") failed: property already set
2316[ 23.767750] c3 3015 droid-hal-init: property_set("ro.config.notification_sound", "Chime.ogg") failed: property already set
2317[ 23.767759] c3 3015 droid-hal-init: property_set("ro.config.alarm_alert", "Flow.ogg") failed: property already set
2318[ 23.767784] c3 3015 droid-hal-init: property_set("ro.com.google.clientidbase", "android-google") failed: property already set
2319[ 23.767811] c3 3015 droid-hal-init: property_set("ro.carri, "unknown") failed: property already set
2320[ 23.767902] c3 3015 droid-hal-init: property_set("ro.storage_manager.enabled", "true") failed: property already set
2321[ 23.767917] c3 3015 droid-hal-init: property_set("ro.boot.vendor.overlay.theme", "com.google.android.theme.pixel") failed: property already set
2322[ 23.767955] c3 3015 droid-hal-init: Couldn't load propertyn '/factory/factory.prop': No such file or directory: No such file or directory
2323[ 23.778471] c2 3015 droid-hal-init: /recovery not specifie 23.778507] c2 3015 droid-hal-init: Command 'load_system_props' action=post-fs (/init.rc:307) returned 0 took 278ms.
2324[ 23.778563] c2 3015 droid-hal-init: starting service 'logdg service 'servicemanager'...
2325[ 23.779232] c2 3015 droid-hal-init: starting service 'vndservicemanager'...
2326[ 23.779867] c2 3015 droid-hal-init: processing action (post-fs) from (/system/etc/init/atrace.rc:3)
2327[ 23.780078] c1 3299 droid-hal-init: Created socket '/dev/socket/logd', mode 666, user 1036, group 1036
2328[ 23.780219] c1 3299 droid-hal-init: Created socket '/dev/socket/logdr', mode 666, user 1036, group 1036
2329[ 23.780337] c1 3299 droid-hal-init: Created socket '/dev/socket/logdw', mode 222, user 1036, group 1036
2330[ 23.780379] c1 3299 droid-hal-init: Opened file '/proc/kmsg', flags 0
2331[ 23.780412] c1 3299 droid-hal-init: Opened file '/dev/kmsg', flags 1
2332[ 23.780513] c1 3299 droid-hal-init: couldn't write 3299 to /dev/cpuset/system-background/tasks: No space left on device
2333[ 23.781121] c1 3301 droid-hal-init: couldn't write 3301 to /dev/cpuset/system-background/tasks: No space left on device
2334[ 23.782142] c2 3015 droid-hal-init: Unable to open '/sys/kernel/tracing/tracing_on': Permission denied
2335[ 23.782246] c2 3015 droid-hal-init: processing action (post-fs) from (/system/etc/init/atrace_userdebug.rc:6)
2336[ 23.782881] c2 3015 droid-hal-init: processing action (post-fs) from (/system/etc/init/recovery-refresh.rc:1)
2337[ 23.782963] c2 3015 droid-hal-init: starting service 'exec 1 (/system/bin/recovery-refresh)'...
2338[ 23.783274] c2 3015 droid-hal-init: SVC_EXEC pid 3304 (uid 1000 gid 1007+0 context default) started; waiting...
2339[ 23.783542] c1 3302 droid-hal-init: couldn't write 3302 to /dev/cpuset/system-background/tasks: No space left on device
2340[ 23.793744] c2 3015 droid-hal-init: Service 'exec 1 (/system/bin/recovery-refresh)' (pid 3304) killed by signal 126 waiting took 0.010000 seconds
2341[ 23.793823] c2 3015 droid-hal-init: processing action (posc/init/android.hardware.usb@1.1-service.marlin.rc:6)
2342[ 23.794064] c2 3015 droid-hal-init: processing action (post-fs) from (/vendor/etc/init/init.nanohub.rc:1)
2343[ 23.794130] c2 3015 droid-hal-init: starting service 'flash-nanohub-fw'...
2344[ 23.794487] c2 3015 droid-hal-init: processing action (post-fs) from (/vendor/etc/init/init.rc:120)
2345[ 23.794540] c2 3015 droid-hal-init: start_waiting_for_property("sys.listeners.registered", "true"): already set
2346[ 23.794553] c2 3015 droid-hal-init: processing action (post-fs) from (/vendor/etc/init/init.usb.rc:20)
2347[ 23.794614] c2 3015 droid-hal-init: Unable to write to '/sys/class/android_usb/android0/f_ffs/aliases': Device or resource busy
2348[ 23.795397] c2 3015 ffs_data_put(): freeing
2349[ 23.796151 3015 ffs_data_put(): freeing
2350[ 23.796181] c2 3015 droid-hal-init: processing action (late-fs) from (/init.rc:361)
2351[ 23.798013] c2 3015 droid-hal-init: starting service 'boot-hal-1-0'...
2352[ 23.798371] c2 3015 droid-hal-init: processing action (late-fs) from (/vendor/etc/init/init.rc:125)
2353[ 23.798418] c2 3015 droid-hal-init: starting service 'devstart_sh'...
2354[ 23.799033] c2 3015 droid-hal-init: cannot find '/system/bin/surfaceflinger_HYBRIS_DISABLED', disabling 'surfaceflinger': No such file or directory
2355[ 23.799083] c2 3015 droid-hal-init: starting service 'boot c2 3015 droid-hal-init: starting service 'hwcomposer-2-1'...
2356[ 23.799704] c2 3015 droid-hal-init: starting service 'configstore-hal-1-0'...
2357[ 23.799998] c2 3015 droid-hal-init: starting service 'gralloc-2-0'...
2358[ 23.800531] c2 3015 droid-hal-init: Unable to open '/sys/block/dm-0/queue/read_ahead_kb': No such file or directory
2359[ 23.800554] c2 3015 droid-hal-init: Unable to open '/sys/block/dm-1/queue/read_ahead_kb': No such file or directory
2360[ 23.800595] c2 3015 droid-hal-init: starting service 'time_daemon'...
2361[ 23.800951] c2 3015 droid-hal-init: processing action (post-fs-data) from (/init.rc:369)
2362[ 23.801107] c2 3015 droid-hal-init: cannot find '/system/bin/vold_HYBRIS_DISABLED', disabling 'vold': No such file or directory
2363[ 23.805926] c0 3015 droid-hal-init: Unable to open '/data/m/entropy.dat': No such file or directory
2364[ 23.807452] c0 3015 droid-hal-init: Unable to open '/data/misc/recovery/ro.build.fingerprint': No such file or directory
2365[ 23.807631] c0 3015 droid-hal-init: Unable to open '/data/misc/recovery/ro.build.fingerprint': No such file or directory
2366[ 23.807760] c0 3015 droid-hal-init: Unable to open '/data/misc/recovery/proc/version': No such file or directory
2367[ 23.807953] c0 3015 droid-hal-init: Unable to open '/data/misc/recovery/proc/version': No such file or directory
2368[ 23.822294] c0 3015 droid-hal-init: Service 'time_daemon' (pid 3327) killed by signal 106
2369[ 23.822314] c0 3015 droid-hal-init: Sending signal 9 to service 'time_daemon' (pid 3327) process group... HYBRIS: killing PID instead of process group.
2370[ 23.825620] c2 3299 logd.auditd: start
2371[ 23.825645] c2 85
2372[ 23.833195] c0 3015 droid-hal-init: starting service 'exec 2 (/system/bin/tzdatacheck /system/usr/share/zoneinfo /data/misc/zoneinfo)'...
2373[ 23.833612] c0 3015 droid-hal-init: SVC_EXEC pid 3343 (uid+0 context default) started; waiting...
2374[ 23.856999] c0 3015 droid-hal-init: Service 'exec 2 (/system/bin/tzdatacheck /system/usr/share/zoneinfo /data/misc/zoneinfo)' (pid 3343) exited with status 0 waiting took 0.023000 seconds
2375[ 23.857118] c0 3015 droid-hal-init: processing action (pos] c0 3015 droid-hal-init: processing action (post-fs-data) from (/system/etc/init/lineage-ssh.rc:1)
2376[ 23.859694] c0 3015 droid-hal-init: processing action (posneage-system.rc:6)
2377[ 23.859795] c0 3015 droid-hal-init: starting service 'sysinit'...
2378[ 23.860383] c0 3015 droid-hal-init: processing action (post-fs-data) from (/system/etc/init/lineage-updates.rc:1)
2379[ 23.862757] c0 3015 droid-hal-init: processing action (post-fs-data) from (/system/etc/init/logtagd.rc:4)
2380[ 23.862895] c0 3015 droid-hal-init: Unable to open '/data/misc/logd/event-log-tags': No such file or directory
2381[ 23.862996] c0 3015 droid-hal-init: processing action (post-fs-data) from (/system/etc/init/otapreopt.rc:3)
2382[ 23.863096] c0 3015 droid-hal-init: starting service 'exec 3 (/system/bin/otapreopt_slot)'...
2383[ 23.863522] c0 3015 droid-hal-init: SVC_EXEC pid 3367 (uid 0 gid 0+0 context default) started; waiting...
2384[ 23.882295] c1 3316 nanohub nanohub: nanohub_download_bl: err=-2
2385[ 24.258927] c0 3322 binder: 3322:3322 transaction failed 29189/0, size 0-0 line 2157
2386[ 24.532623] c3 3321 adsp-loader soc:qcom,msm-adsp-loader: adsp_loader_do: scheduling work to load ADSP Starting Oneshot stuff for root...[ 24.542632] c3 3059 subsys-pil-tz 9300000.qcom,lpass: adsp: Failed to locate adsp.mdt
2387
2388[ 24.553331] c3 3321 sensors-ssc soc:qcom,msm-ssc-sensorser: adsp_load_fw: pil get failed,
2389[ 24.571795] c3 3059 adsp-loader soc:qcom,msm-adsp-loader: adsp_load_fw: Q6 image loading failed
2390[ 24.576959] c0 3015 droid-hal-init: Service 'exec 3 (/system/bin/otapreopt_slot)' (pid 3367) exited with status 0 waiting took 0.713000 seconds
2391[ 24.577105] c0 3015 droid-hal-init: processing action (posstem/etc/init/recovery-persist.rc:1)
2392[ 24.577310] c0 3015 droid-hal-init: starting service 'exec 4 (/system/bin/recovery-persist)'...
2393[ 24.577698] c0 3015 droid-hal-init: SVC_EXEC pid 4621 (uid 1000 gid 1007+0 context default) started; waiting...
2394[ 24.587035] c0 3015 droid-hal-init: Service 'exec 4 (/system/bin/recovery-persist)' (pid 4621) exited with status 0 waiting took 0.009000 seconds
2395[ 24.587151] c0 3015 droid-hal-init: processing action (posor/etc/init/hostapd.android.rc:9)
2396[ 24.587257] c0 3015 droid-hal-init: processing action (post-fs-data) from (/vendor/etc/init/init.nanohub.rc:7)
2397[ 24.587400] c0 3015 droid-hal-init: processing action (post-fs-data) from (/vendor/etc/init/init.nanohub.rc:23)
2398[ 24.587464] c0 3015 droid-hal-init: processing action (post-fs-data) from (/vendor/etc/init/init.rc:151)
2399[ 24.587514] c0 3015 droid-hal-init: cannot find '/system/bin/netd_HYBRIS_DISABLED', disabling 'netd': No such file or directory
2400[ 24.587558] c0 3015 droid-hal-init: starting service 'mid_.
2401[ 24.636715] c1 3015 droid-hal-init: Service 'devstart_sh' (pid 3321) exited with status 0
2402[ 24.643407] c0 3015 droid-hal-init: Service 'mid_sh' (pid 4624) exited with ⸮ Starting Login Service...[ 24.710235] c3 3059 adsp_load_fw: trigger BUG due to Q6/ADSP image is loaded failed
2403[ 24.711602] c2 3015 droid-hal-init: Service 'sysinit' (pidce 'flash-nanohub-fw' (pid 3316) exited with status 0
2404
2405[ 24.736765] c3 3059 subsys-pil-tz 1c00000.qcom,ssc: slpi: Failed to locate slpi.mdt
2406[ 24.745804] c3 3059 sensors-ssc soc:qcom,msm-ssc-sensors: slpi_load_fw: pil get failed,
2407[ 24.753014] c3 3059 sensors-ssc soc:qcom,msm-ssc-sensors: slpi_load_fw: SLPI image loading failed
2408[[32m OK [0m] Started droid-late-start.
2409 Starting Indicate boot is done...
2410 Starting Disk Manager...
2411 Starting Handle udisks sd mount...
2412 Starting Nemo device lock daemon...
2413 Starting Telephony service...
2414[[32m OK [0m] Started Oneshot stuff for root.
2415[ 24.896137] c1 3015 droid-hal-init: Service 'droid_init_done' (pid 3070) exited with status 0
2416[ 24.919322] c0 5116 FG: fg_vbatt_low_handler: vbatt-low ⸮[[32m OK [0m] [ 24.924784] c0 427 SMBCHG: smbchg_external_power_changed: usb type = 4, current_limit = 500, rc = 0
2417Started Telephony service.
2418[ 24.935013] c0 427 SMBCHG: smGrʢ⸮⸮⸮⸮⸮c0 427 SMBCHG: smbchg_vfloat_adjust_check: Starting vfloat adjustments
2419[[32m OK [0m[ 24.954145] c0 422 SMBCHG: smbchg_relax: relaxing: 0x00 (bit 2)
2420] Started Login Service.
2421 Starting Authorization Manager...
2422 Starting Connection service...
2423 Starting Permit User Sessions...
2424 Starting Sensor daemon for sensor framework...
2425[[32m OK [0m] Started Nemo device lock daemon.
2426[[32m OK [0m] Started Permit User Sessions.
2427[[32m OK [0m] Started Authorization Manager.
2428[[32m OK [0m] Started Sensor daemon for sensor framework.
2429[[32m OK [0m] Started Serial Getty on ttyHSL0.
2430[[32m OK [0m] Reached target Login Prompts.
2431 Starting Start User Session...
2432[[32m OK [0m] Created slice system-autologin.slice.
2433[[32m OK [0m] Started Autologin user 100000.
2434[[32m OK [0m] Created slice user-100000.slice.
2435[[32m OK [0m] Started Session c1 of user nemo.
2436 Starting User Manager for UID 100000...
2437[ 25.259054] c0 3322 binder: 3322:3322 transaction failed 29189/0, size 0-0 line 2157
2438[[32m OK [0m] Started Connection service.
2439 Starting Hostname Service...
2440 Starting ConnMan VPN service...
2441 Starting Bluetooth service...
2442[[32m OK [0m] Started Hostname Service.
2443[[32m OK [0m] Started ConnMan VPN service.
2444[[32m OK [0m] Started Bluetooth service.
2445 Starting WPA Supplicant daemon...
2446[[32m OK [0m] Started User Manager for UID 100000.
2447[[32m OK [0m] Started WPA Supplicant daemon.
2448[[32m OK [0m] Reached target Network.
2449[ 25.994161] c3 6291 binder: 6291:6291 transaction failed 29189/0, size 0-0 line 2157
2450[[32m OK [0m] Started Disk Manager.
2451[[32m OK [0m] Started Start User Session.
2452[ 26.266252] c0 3322 binder: 3322:3322 transaction failed 29189/0, size 0-0 l⸮ Starting Inform dsme about runlevel change...
2453[[32m OK [0m] Started Inform dsme about runlevel change.
2454[[1;31mFAILED[0m] Failed to start Handle udisks sd mount.
2455See 'systemctl status mount-sd@sdd3.service' for details.
2456[ 27.001249] c3 6291 binder: 6291:6291 transaction failed 29189/0, size 0-0 line 2157
2457[ 27.273624] c0 3322 binder: 3322:3322 transaction failed 29189/0, size 0-0 line 2157
2458[ 28.008341] c3 6291 binder: 6291:6291 transaction failed 29189/0, size 0-0 line 2157
2459[ 28.280759] c0 3322 binder: 3322:3322 transaction failed 29189/0, size 0-0 line 2157
2460[ 29.015590] c3 6291 binder: 6291:6291 transaction failed 29189/0, size 0-0 line 2157
2461[ 29.287855] c1 3322 binder: 3322:3322 transaction failed 29189/0, size 0-0 line 2157
2462[ 30.023367] c2 6291 binder: 6291:6291 transaction failed 29189/0, size 0-0 line 2157
2463[ 30.294972] c1 3322 binder: 3322:3322 transaction failed 29189/0, size 0-0 line 2157
2464[ 31.030454] c2 6291 binder: 6291:6291 transaction failed 29189/0, size 0-0 line 2157
2465
2466
2467Sailfish OS 3.0.2.8 (Oulanka)
2468Kernel 3.18.70-Lineage-g54b61efe09a-dirty on an aarch64
2469
2470Sailfish login: [ 31.302107] c2 3322 binder: 3322:3322 transaction failed 29189/0, size 0-0 line 2157
2471[ 31.343798] c3 3015 droid-hal-init: Service 'servicemanager' (pid 3301) killed by signal 6
2472[ 31.351435] c2 3015 droid-hal-init: Sending signal 9 to service 'servicemanager' (pid 3301) process group... HYBRIS: killing PID instead of process group.
2473[ 31.365574] c2 3015 droid-hal-init: starting service 'healc2 3015 droid-hal-init: cannot find '/usr/libexec/droid-hybris/system/bin/miniafservice', disabling 'miniaf': No such file or directory
2474[ 31.386217] c2 3015 droid-hal-init: cannot find '/usr/libeo such file or directory
2475[ 31.399397] c2 3015 droid-hal-init: cannot find '/usr/libexec/droid-hybris/system/bin/minisfservice', disabling 'minisf': No such file or directory
2476[ 31.412969] c3 3015 droid-hal-init: Service 'hwservicemanay signal 6
2477[ 31.421432] c3 3015 droid-hal-init: Sending signal 9 to service 'hwservicemanager' (pid 3075) process group... HYBRIS: killing PID instead of process group.
2478[ 31.435829] c3 3015 droid-hal-init: starting service 'hidl3015 droid-hal-init: starting service 'audio-hal-2-0'...
2479[ 31.449365] c3 3015 droid-hal-init: starting service 'bluetooth-1-0'...
2480[ 31.450398] c1 18047 droid-hal-init: couldn't write 18047 to /dev/cpuset/foreground/tasks: No space left on device
2481[ 31.466347] c3 3015 droid-hal-init: starting service 'camera-provider-2-4'...
2482[ 31.473742] c3 3015 droid-hal-init: starting service 'cas-hal-1-0'...
2483[ 31.474525] c0 18065 droid-hal-init: couldn't write 18065 to /dev/cpuset/camera-daemon/tasks: No such file or directory
2484[ 31.491124] c3 3015 droid-hal-init: Sending signal 9 to service 'configstore-hal-1-0' (pid 3324) process group... HYBRIS: killing PID instead of process group.
2485[ 31.492117] c0 18077 droid-hal-init: couldn't write 18077 tpace left on device
2486[ 31.515703] c2 3015 droid-hal-init: starting service 'contexthub-hal-1-0'...
2487[ 31.524394] c2 3015 droid-hal-init: starting service 'drm-hal-1-0'...
2488[ 31.530326] c2 3015 droid-hal-init: starting service 'drm-widevine-hal-1-0'...
2489[ 31.530491] c3 18095 droid-hal-init: couldn't write 18095 to /dev/cpuset/foreground/tasks: No space left on device
2490[ 31.548674] c2 3015 droid-hal-init: starting service 'dumpstate-1-0'...
2491[ 31.549701] c0 18108 droid-hal-init: couldn't write 18108 to /dev/cpuset/foreground/tasks: No space left on device
2492[ 31.565450] c2 3015 droid-hal-init: starting service 'gatekeeper-1-0'...
2493[ 31.572404] c2 3015 droid-hal-init: starting service 'gnss_service'...
2494[ 31.582514] c2 3015 droid-hal-init: Sending signal 9 to service 'gralloc-2-0' (pid 3326) process group... HYBRIS: killing PID instead of process group.
2495[ 31.596085] c2 3015 droid-hal-init: Sending signal 9 to se3323) process group... HYBRIS: killing PID instead of process group.
2496[ 31.609362] c2 3015 droid-hal-init: starting service 'lighl-2-0'...
2497[ 31.616401] c2 3015 droid-hal-init: starting service 'memtrack-hal-1-0'...
2498[ 31.623379] c2 3015 droid-hal-init: starting service 'nfc_hal_service'...
2499[ 31.630324] c2 3015 droid-hal-init: starting service 'power-hal-1-1'...
2500[ 31.637559] c2 3015 droid-hal-init: starting service 'sensors-hal-1-0'...
2501[ 31.644344] c2 3015 droid-hal-init: starting service 'usb-hal-1-1'...
2502[ 31.650971] c2 3015 droid-hal-init: starting service 'vibrator-1-0'...
2503[ 31.657634] c2 3015 droid-hal-init: starting service 'vr-1-0'...
2504[ 31.663790] c2 3015 droid-hal-init: starting service 'wifi_hal_legacy'...
2505[ 31.670784] c2 3015 droid-hal-init: Command 'class_restart hal' action=onrestart (<Service 'hwservicemanager' onrestart>:2) returned 0 took 235ms.
2506[ 31.683657] c2 3015 droid-hal-init: cannot find '/odm/bin/master@3.0-service-qti_HYBRIS_DISABLED', disabling 'keymaster-3-0': No such file or directory
2507[ 31.699348] c2 3015 droid-hal-init: Sending signal 9 to se19) process group... HYBRIS: killing PID instead of process group.
2508[ 31.713608] c2 3015 droid-hal-init: Service 'boot-hal-1-0'pid 3319) killed by signal 9
2509[ 31.721213] c2 3015 droid-hal-init: Service 'hwcomposer-2-1' (pid 3323) killed by signal 9
2510[ 31.729564] c2 3015 droid-hal-init: cannot find '/system/bin/surfaceflinger_HYBRIS_DISABLED', disabling 'surfaceflinger': No such file or directory
2511[ 31.743034] c2 3015 droid-hal-init: Service 'configstore-hd by signal 9
2512[ 31.751956] c3 3015 droid-hal-init: Service 'gralloc-2-0' (pid 3326) killed by signal 9
2513[ 31.759970] c3 3015 droid-hal-init: cannot find '/system/bin/surfaceflinger_HYBRIS_DISABLED', disabling 'surfaceflinger': No such file or directory
2514[ 31.773400] c3 3015 droid-hal-init: Service 'vibrator-1-0'ignal 115
2515[ 31.781859] c3 3015 droid-hal-init: Sending signal 9 to service 'vibrator-1-0' (pid 18170) process group... HYBRIS: killing PID instead of process group.
2516[ 32.037522] c3 6291 binder: 6291:6291 transaction failed 29189/0, size 0-0 line 2157
2517[ 32.309868] c2 3322 binder: 3322:3322 transaction failed 29189/0, size 0-0 line 2157
2518[ 33.044619] c2 6291 binder: 6291:6291 transaction failed 29189/0, size 0-0 line 2157
2519[ 33.316905] c3 3322 binder: 3322:3322 transaction failed 29189/0, size 0-0 line 2157
2520[ 33.709789] c0 0 FG: fg_vbatt_low_handler: vbatt-low triggered
2521[ 33.715245] c0 427 SMBCHG: smbchg_external_power_changed: usb type = 4, current_limit = 500, rc = 0
2522[ 33.724345] c0 427 SMBCHG: smbchg_stay_awake: staying awake: 0x02 (bit 2)
2523[ 33.731375] c0 427 SMBCHG: smbchg_vfloat_adjust_check: Starting vfloat adjustments
2524[ 33.739991] c0 422 SMBCHG: smbchg_relax: relaxing: 0x00 (bit 2)
2525[ 34.051681] c2 6291 binder: 6291:6291 transaction failed 29189/0, size 0-0 line 2157
2526[ 34.323932] c3 3322 binder: 3322:3322 transaction failed 29189/0, size 0-0 line 2157
2527[ 35.058707] c2 6291 binder: 6291:6291 transaction failed 29189/0, size 0-0 line 2157
2528[ 35.330946] c3 3322 binder: 3322:3322 transaction failed 29189/0, size 0-0 line 2157
2529[ 36.065738] c2 6291 binder: 6291:6291 transaction failed 29189/0, size 0-0 line 2157
2530[ 36.337982] c3 3322 binder: 3322:3322 transaction failed 29189/0, size 0-0 line 2157
2531[ 37.072770] c2 6291 binder: 6291:6291 transaction failed 29189/0, size 0-0 line 2157
2532[ 37.345004] c2 3322 binder: 3322:3322 transaction failed 29189/0, size 0-0 line 2157
2533[ 38.079849] c2 6291 binder: 6291:6291 transaction failed 29189/0, size 0-0 line 2157
2534[ 38.352065] c3 3322 binder: 3322:3322 transaction failed 29189/0, size 0-0 line 2157
2535[ 38.782262] c1 425 FG: fg_is_batt_id_valid: fg batt sts 0x28
2536[ 39.086872] c2 6291 binder: 6291:6291 transaction failed 29189/0, size 0-0 line 2157
2537[ 39.359079] c3 3322 binder: 3322:3322 transaction failed 29189/0, size 0-0 line 2157
2538[ 40.093889] c2 6291 binder: 6291:6291 transaction failed 29189/0, size 0-0 line 2157
2539[ 40.366147] c3 3322 binder: 3322:3322 transaction failed 29189/0, size 0-0 line 2157
2540[ 41.100922] c2 6291 binder: 6291:6291 transaction failed 29189/0, size 0-0 line 2157
2541[ 41.373381] c2 3322 binder: 3322:3322 transaction failed 29189/0, size 0-0 line 2157
2542[ 41.395571] [BATT] chg_full_check_worker: vol:4216, curr=255, is_full_count=0, is_full=0 at 41393721778 (2019-03-13 08:17:53.881254423 UTC)
2543[ 42.107944] c2 6291 binder: 6291:6291 transaction failed 29189/0, size 0-0 line 2157
2544[ 42.380422] c2 3322 binder: 3322:3322 transaction failed 29189/0, size 0-0 line 2157
2545[ 43.114973] c2 6291 binder: 6291:6291 transaction failed 29189/0, size 0-0 line 2157
2546[ 43.387449] c2 3322 binder: 3322:3322 transaction failed 29189/0, size 0-0 line 2157
2547[ 44.122028] c2 6291 binder: 6291:6291 transaction failed 29189/0, size 0-0 line 2157
2548[ 44.394476] c2 3322 binder: 3322:3322 transaction failed 29189/0, size 0-0 line 2157
2549[ 45.129103] c2 6291 binder: 6291:6291 transaction failed 29189/0, size 0-0 line 2157
2550[ 45.403548] c3 3322 binder: 3322:3322 transaction failed 29189/0, size 0-0 line 2157
2551[ 45.763095] c2 3015 droid-hal-init: Service 'vndservicemanager' (pid 3302) killed by signal 6
2552[ 45.770815] c2 3015 droid-hal-init: Sending signal 9 to service 'vndservicemanager' (pid 3302) process group... HYBRIS: killing PID instead of process group.
2553[ 46.136150] c2 6291 binder: 6291:6291 transaction failed 29189/0, size 0-0 line 2157
2554[ 46.411147] c3 3322 binder: 3322:3322 transaction failed 29189/0, size 0-0 line 2157
2555[ 47.143168] c2 6291 binder: 6291:6291 transaction failed 29189/0, size 0-0 line 2157
2556[ 47.418156] c3 3322 binder: 3322:3322 transaction failed 29189/0, size 0-0 line 2157
2557[ 48.150183] c2 6291 binder: 6291:6291 transaction failed 29189/0, size 0-0 line 2157
2558[ 48.425166] c3 3322 binder: 3322:3322 transaction failed 29189/0, size 0-0 line 2157
2559[ 49.157206] c2 6291 binder: 6291:6291 transaction failed 29189/0, size 0-0 line 2157
2560[ 49.432173] c3 3322 binder: 3322:3322 transaction failed 29189/0, size 0-0 line 2157
2561[ 50.164231] c2 6291 binder: 6291:6291 transaction failed 29189/0, size 0-0 line 2157
2562[ 50.439177] c3 3322 binder: 3322:3322 transaction failed 29189/0, size 0-0 line 2157
2563[ 51.171254] c2 6291 binder: 6291:6291 transaction failed 29189/0, size 0-0 line 2157
2564[ 51.446170] c3 3322 binder: 3322:3322 transaction failed 29189/0, size 0-0 line 2157
2565[ 52.178275] c2 6291 binder: 6291:6291 transaction failed 29189/0, size 0-0 line 2157
2566[ 52.453168] c3 3322 binder: 3322:3322 transaction failed 29189/0, size 0-0 line 2157
2567[ 53.185290] c2 6291 binder: 6291:6291 transaction failed 29189/0, size 0-0 line 2157
2568[ 53.460169] c3 3322 binder: 3322:3322 transaction failed 29189/0, size 0-0 line 2157
2569[ 54.192322] c2 6291 binder: 6291:6291 transaction failed 29189/0, size 0-0 line 2157
2570[ 54.467175] c3 3322 binder: 3322:3322 transaction failed 29189/0, size 0-0 line 2157
2571[ 55.199340] c2 6291 binder: 6291:6291 transaction failed 29189/0, size 0-0 line 2157
2572[ 55.474181] c3 3322 binder: 3322:3322 transaction failed 29189/0, size 0-0 line 2157
2573[ 55.572406] c0 275 [RMNET:HI] rmnet_config_notify_cb(): Kernel is trying to unregister sit0
2574[ 55.582511] c1 275 [RMNET:HI] rmnet_config_notify_cb(): Kernel is trying to unregister sit0
2575[ 55.592620] c1 275 [RMNET:HI] rmnet_config_notify_cb(): Kernel is trying to unregister lo
2576[ 55.622256] c2 275 [RMNET:HI] rmnet_config_notify_cb(): Kernel is trying to unregister lo
2577[ 56.086735] c2 2372 SMBCHG: pmi8996_charger_batfet_switch: Batfet WA 0->1, chgr_RT_STS=0x10, batif_RT_STS=0x0
2578[ 56.095851] c2 2372 mdss_fb_set_bl_brightness: bl_dim_status =1
2579[ 56.206367] c2 6291 binder: 6291:6291 transaction failed 29189/0, size 0-0 line 2157
2580[ 56.481189] c3 3322 binder: 3322:3322 transaction failed 29189/0, size 0-0 line 2157
2581[ 57.213389] c2 6291 binder: 6291:6291 transaction failed 29189/0, size 0-0 line 2157
2582[ 57.488193] c3 3322 binder: 3322:3322 transaction failed 29189/0, size 0-0 line 2157
2583[ 58.220404] c2 6291 binder: 6291:6291 transaction failed 29189/0, size 0-0 line 2157
2584[ 58.495188] c3 3322 binder: 3322:3322 transaction failed 29189/0, size 0-0 line 2157
2585[ 59.031114] c2 2372 qpnp_led.red: b:34 on:50 off:0
2586[ 59.036321] c2 2372 qpnp_led.green: b:34 on:50 off:0
2587[ 59.041656] c2 2372 qpnp_led.blue: b:34 on:50 off:0
2588[ 59.050024] c2 2372 qpnp_led.red: b:34 on:50 off:0
2589[ 59.055173] c2 2372 qpnp_led.green: b:34 on:50 off:0
2590[ 59.060507] c2 2372 qpnp_led.blue: b:34 on:50 off:0
2591[ 59.068869] c2 2372 qpnp_led.red: b:34 on:50 off:0
2592[ 59.074019] c2 2372 qpnp_led.green: b:34 on:50 off:0
2593[ 59.079362] c2 2372 qpnp_led.blue: b:34 on:50 off:0
2594[ 59.103804] c2 2372 SMBCHG: pmi8996_charger_batfet_switch: Batfet WA 1->0, chgr_RT_STS=0x10, batif_RT_STS=0x0
2595[ 59.112917] c2 2372 mdss_fb_set_bl_brightness: bl_dim_status =0
2596[ 59.227416] c2 6291 binder: 6291:6291 transaction failed 29189/0, size 0-0 line 2157
2597[ 59.502203] c3 3322 binder: 3322:3322 transaction failed 29189/0, size 0-0 line 2157
2598[ 60.234433] c2 6291 binder: 6291:6291 transaction failed 29189/0, size 0-0 line 2157
2599[ 60.509212] c3 3322 binder: 3322:3322 transaction failed 29189/0, size 0-0 line 2157
2600[ 61.241469] c2 6291 binder: 6291:6291 transaction failed 29189/0, size 0-0 line 2157
2601[ 61.448874] [BATT] chg_full_check_worker: vol:4216, curr=255, is_full_count=0, is_full=0 at 61446932057 (2019-03-13 08:18:13.934560640 UTC)
2602[ 61.516236] c3 3322 binder: 3322:3322 transaction failed 29189/0, size 0-0 line 2157
2603[ 62.248481] c2 6291 binder: 6291:6291 transaction failed 29189/0, size 0-0 line 2157
2604[ 62.523259] c3 3322 binder: 3322:3322 transaction failed 29189/0, size 0-0 line 2157
2605[ 63.255490] c2 6291 binder: 6291:6291 transaction failed 29189/0, size 0-0 line 2157
2606[ 63.530280] c3 3322 binder: 3322:3322 transaction failed 29189/0, size 0-0 line 2157
2607[ 64.262510] c2 6291 binder: 6291:6291 transaction failed 29189/0, size 0-0 line 2157
2608[ 64.537311] c3 3322 binder: 3322:3322 transaction failed 29189/0, size 0-0 line 2157
2609[ 65.269527] c2 6291 binder: 6291:6291 transaction failed 29189/0, size 0-0 line 2157
2610[ 65.544422] c3 3322 binder: 3322:3322 transaction failed 29189/0, size 0-0 line 2157
2611[ 66.276554] c2 6291 binder: 6291:6291 transaction failed 29189/0, size 0-0 line 2157
2612[ 66.551419] c3 3322 binder: 3322:3322 transaction failed 29189/0, size 0-0 line 2157
2613[ 67.283579] c2 6291 binder: 6291:6291 transaction failed 29189/0, size 0-0 line 2157
2614[ 67.558430] c3 3322 binder: 3322:3322 transaction failed 29189/0, size 0-0 line 2157
2615[ 68.290662] c2 6291 binder: 6291:6291 transaction failed 29189/0, size 0-0 line 2157
2616[ 68.565442] c3 3322 binder: 3322:3322 transaction failed 29189/0, size 0-0 line 2157
2617[ 68.862240] c1 18 FG: fg_is_batt_id_valid: fg batt sts 0x28
2618[ 69.297675] c2 6291 binder: 6291:6291 transaction failed 29189/0, size 0-0 line 2157
2619[ 69.572449] c3 3322 binder: 3322:3322 transaction failed 29189/0, size 0-0 line 2157
2620[ 70.304689] c2 6291 binder: 6291:6291 transaction failed 29189/0, size 0-0 line 2157
2621[ 70.579457] c3 3322 binder: 3322:3322 transaction failed 29189/0, size 0-0 line 2157
2622[ 71.311715] c2 6291 binder: 6291:6291 transaction failed 29189/0, size 0-0 line 2157
2623[ 71.586468] c3 3322 binder: 3322:3322 transaction failed 29189/0, size 0-0 line 2157
2624[ 72.318744] c2 6291 binder: 6291:6291 transaction failed 29189/0, size 0-0 line 2157
2625[ 72.593472] c3 3322 binder: 3322:3322 transaction failed 29189/0, size 0-0 line 2157
2626[ 73.325771] c2 6291 binder: 6291:6291 transaction failed 29189/0, size 0-0 line 2157
2627[ 73.600541] c2 3322 binder: 3322:3322 transaction failed 29189/0, size 0-0 line 2157
2628[ 74.332821] c2 6291 binder: 6291:6291 transaction failed 29189/0, size 0-0 line 2157
2629[ 74.607561] c3 3322 binder: 3322:3322 transaction failed 29189/0, size 0-0 line 2157
2630[ 75.339847] c2 6291 binder: 6291:6291 transaction failed 29189/0, size 0-0 line 2157
2631[ 75.614573] c3 3322 binder: 3322:3322 transaction failed 29189/0, size 0-0 line 2157
2632[ 76.346859] c2 6291 binder: 6291:6291 transaction failed 29189/0, size 0-0 line 2157
2633[ 76.621639] c2 3322 binder: 3322:3322 transaction failed 29189/0, size 0-0 line 2157
2634[ 77.353865] c2 6291 binder: 6291:6291 transaction failed 29189/0, size 0-0 line 2157
2635[ 77.628660] c3 3322 binder: 3322:3322 transaction failed 29189/0, size 0-0 line 2157
2636[ 78.360885] c2 6291 binder: 6291:6291 transaction failed 29189/0, size 0-0 line 2157
2637[ 78.635669] c3 3322 binder: 3322:3322 transaction failed 29189/0, size 0-0 line 2157
2638[ 79.367910] c2 6291 binder: 6291:6291 transaction failed 29189/0, size 0-0 line 2157
2639[ 79.642670] c3 3322 binder: 3322:3322 transaction failed 29189/0, size 0-0 line 2157
2640[ 80.374938] c2 6291 binder: 6291:6291 transaction failed 29189/0, size 0-0 line 2157
2641[ 80.649757] c3 3322 binder: 3322:3322 transaction failed 29189/0, size 0-0 line 2157
2642[ 81.381964] c2 6291 binder: 6291:6291 transaction failed 29189/0, size 0-0 line 2157
2643[ 81.502206] [BATT] chg_full_check_worker: vol:4381, curr=-84, is_full_count=1, is_full=0 at 81500271971 (2019-03-13 08:18:33.987894721 UTC)
2644[ 81.558063] c2 277 [BATT] calculate_batt_cycle_info: g_batt_first_use_time = 2019-03-13 08:17:33, g_overheat_55_sec = 0, g_total_level_raw = 0
2645[ 81.570094] c2 277 [BATT] calculate_batt_cycle_info: savery 50%
2646[ 81.578017] [BATT] ibat_max=3400000,ibat_new=1600000,prev_vol_limit=1,prev_ibat_health=1,chg_limit_reason=0,prev_screen_warm=0,prev_screen_hot=0,is_over_ibat=0,htc_batt_info.state=0x0 at 81585293907 (2019-03-13 08:18:34.063708583 UTC)
2647[ 81.598732] [BATT] ibat_total=1600000[1600000,0],ibat_total_50] c2 277 [BATT][SMBCHG] 0x1010=10,0x1210=00,0x1242=00,0x1310=04,0x1340=02,0x1608=10,0x1610=01,cc=3476139uAh,warm_temp=470,cool_temp=100,pmic=rev1.1,sink_current=1,pd_chgr=0,wake_reason=0,smb_curr=12mA,batfet_wa=0
2648[ 81.632668] c2 277 [BATT][SMBCHG] CHG_STS[0B:0F]=[02,6e,8[F6:FB]=[03,3b,2a,04,c8,41]
2649[ 81.653530] [BATT][SMBCHG] USB_STS[07:0B]=[10,02,22,08,08],USB_STS[0C:0F]=[00,08,0f,ff],USB_CFG[F0:F5]=[0f,02,07,04,11,ab],MISC_CFG[F0:F4]=[0f,00,12,04,25],MISC_CFG[F5:F9]=[38,18,91,e0,00],MISC_CFG[FA:FF]=[00,03,22,04,e0,02],[ 81.656766] c3 3322 binder: 3322:3322 transaction failed 29189/0, size 0-0 line 2157
2650
2651[ 81.681210] c2 277 SMB1351[00:06]=[02,1c,87,ef,08,11,6bx_iusb=500mA,chg_limit_reason=0,chg_stop_reason=0,consistent=-1,flag=0x00000000,AICL=1700mA,htc_ext=0x00,usb_temp=277,usb_overheat=0,level_accu=0 at 81706565325 (2019-03-13 08:18:34.174925937 UTC)
2652[ 81.720004] [BATT] Device is at booting stage at 81715328451[ 82.389058] c2 6291 binder: 6291:6291 transaction failed 29189/0, size 0-0 line 2157
2653[ 82.656875] c3 3322 binder: 3322:3322 transaction failed 29189/0, size 0-0 line 2157
2654[ 83.396075] c2 6291 binder: 6291:6291 transaction failed 29189/0, size 0-0 line 2157
2655[ 83.663897] c3 3322 binder: 3322:3322 transaction failed 29189/0, size 0-0 line 2157
2656[ 84.403094] c2 6291 binder: 6291:6291 transaction failed 29189/0, size 0-0 line 2157
2657[ 84.670916] c3 3322 binder: 3322:3322 transaction failed 29189/0, size 0-0 line 2157
2658[ 85.410125] c2 6291 binder: 6291:6291 transaction failed 29189/0, size 0-0 line 2157
2659[ 85.677990] c2 3322 binder: 3322:3322 transaction failed 29189/0, size 0-0 line 2157
2660[ 86.417159] c2 6291 binder: 6291:6291 transaction failed 29189/0, size 0-0 line 2157
2661[ 86.685015] c3 3322 binder: 3322:3322 transaction failed 29189/0, size 0-0 line 2157
2662[ 87.424190] c2 6291 binder: 6291:6291 transaction failed 29189/0, size 0-0 line 2157
2663[ 87.692141] c2 3322 binder: 3322:3322 transaction failed 29189/0, size 0-0 line 2157
2664[ 88.431223] c2 6291 binder: 6291:6291 transaction failed 29189/0, size 0-0 line 2157
2665[ 88.699154] c3 3322 binder: 3322:3322 transaction failed 29189/0, size 0-0 line 2157
2666[ 89.438253] c2 6291 binder: 6291:6291 transaction failed 29189/0, size 0-0 line 2157
2667[ 89.706164] c3 3322 binder: 3322:3322 transaction failed 29189/0, size 0-0 line 2157
2668[ 90.445363] c2 6291 binder: 6291:6291 transaction failed 29189/0, size 0-0 line 2157
2669[ 90.713179] c3 3322 binder: 3322:3322 transaction failed 29189/0, size 0-0 line 2157
2670[ 91.452386] c2 6291 binder: 6291:6291 transaction failed 29189/0, size 0-0 line 2157
2671[ 91.720196] c3 3322 binder: 3322:3322 transaction failed 29189/0, size 0-0 line 2157
2672[ 92.459418] c2 6291 binder: 6291:6291 transaction failed 29189/0, size 0-0 line 2157
2673[ 92.727213] c3 3322 binder: 3322:3322 transaction failed 29189/0, size 0-0 line 2157
2674[ 93.466556] c2 6291 binder: 6291:6291 transaction failed 29189/0, size 0-0 line 2157
2675[ 93.734230] c3 3322 binder: 3322:3322 transaction failed 29189/0, size 0-0 line 2157
2676[ 94.473595] c2 6291 binder: 6291:6291 transaction failed 29189/0, size 0-0 line 2157
2677[ 94.741237] c3 3322 binder: 3322:3322 transaction failed 29189/0, size 0-0 line 2157
2678[ 95.480623] c2 6291 binder: 6291:6291 transaction failed 29189/0, size 0-0 line 2157
2679[ 95.748249] c3 3322 binder: 3322:3322 transaction failed 29189/0, size 0-0 line 2157
2680[ 96.487654] c2 6291 binder: 6291:6291 transaction failed 29189/0, size 0-0 line 2157
2681[ 96.755263] c3 3322 binder: 3322:3322 transaction failed 29189/0, size 0-0 line 2157
2682[ 97.494764] c2 6291 binder: 6291:6291 transaction failed 29189/0, size 0-0 line 2157
2683[ 97.762287] c3 3322 binder: 3322:3322 transaction failed 29189/0, size 0-0 line 2157
2684[ 98.501778] c2 6291 binder: 6291:6291 transaction failed 29189/0, size 0-0 line 2157
2685[ 98.769305] c3 3322 binder: 3322:3322 transaction failed 29189/0, size 0-0 line 2157
2686[ 98.942225] c1 18 FG: fg_is_batt_id_valid: fg batt sts 0x28
2687[ 99.508804] c2 6291 binder: 6291:6291 transaction failed 29189/0, size 0-0 line 2157
2688[ 99.776318] c3 3322 binder: 3322:3322 transaction failed 29189/0, size 0-0 line 2157
2689[ 100.515828] c2 6291 binder: 6291:6291 transaction failed 29189/0, size 0-0 line 2157
2690[ 100.783334] c3 3322 binder: 3322:3322 transaction failed 29189/0, size 0-0 line 2157
2691[ 101.522853] c2 6291 binder: 6291:6291 transaction failed 29189/0, size 0-0 line 2157
2692[ 101.555545] [BATT] chg_full_check_worker: vol:4389, curr=-73, is_full_count=2, is_full=0 at 101553602823 (2019-03-13 08:18:54.041237656 UTC)
2693[ 101.790331] c3 3322 binder: 3322:3322 transaction failed 29189/0, size 0-0 line 2157
2694[ 102.529869] c2 6291 binder: 6291:6291 transaction failed 29189/0, size 0-0 line 2157
2695[ 102.797333] c3 3322 binder: 3322:3322 transaction failed 29189/0, size 0-0 line 2157
2696[ 103.536885] c2 6291 binder: 6291:6291 transaction failed 29189/0, size 0-0 line 2157
2697[ 103.804334] c3 3322 binder: 3322:3322 transaction failed 29189/0, size 0-0 line 2157
2698[ 104.543893] c2 6291 binder: 6291:6291 transaction failed 29189/0, size 0-0 line 2157
2699[ 104.811342] c3 3322 binder: 3322:3322 transaction failed 29189/0, size 0-0 line 2157
2700[ 105.550900] c2 6291 binder: 6291:6291 transaction failed 29189/0, size 0-0 line 2157
2701[ 105.818351] c3 3322 binder: 3322:3322 transaction failed 29189/0, size 0-0 line 2157
2702[ 106.557917] c2 6291 binder: 6291:6291 transaction failed 29189/0, size 0-0 line 2157
2703[ 106.825359] c3 3322 binder: 3322:3322 transaction failed 29189/0, size 0-0 line 2157
2704[ 107.565047] c2 6291 binder: 6291:6291 transaction failed 29189/0, size 0-0 line 2157
2705[ 107.832367] c3 3322 binder: 3322:3322 transaction failed 29189/0, size 0-0 line 2157
2706[ 108.572064] c2 6291 binder: 6291:6291 transaction failed 29189/0, size 0-0 line 2157
2707[ 108.839374] c3 3322 binder: 3322:3322 transaction failed 29189/0, size 0-0 line 2157
2708[ 109.579080] c2 6291 binder: 6291:6291 transaction failed 29189/0, size 0-0 line 2157
2709[ 109.846378] c3 3322 binder: 3322:3322 transaction failed 29189/0, size 0-0 line 2157
2710[ 110.586097] c2 6291 binder: 6291:6291 transaction failed 29189/0, size 0-0 line 2157
2711[ 110.853381] c3 3322 binder: 3322:3322 transaction failed 29189/0, size 0-0 line 2157
2712[ 111.593102] c2 6291 binder: 6291:6291 transaction failed 29189/0, size 0-0 line 2157
2713[ 111.860396] c3 3322 binder: 3322:3322 transaction failed 29189/0, size 0-0 line 2157
2714[ 112.600102] c2 6291 binder: 6291:6291 transaction failed 29189/0, size 0-0 line 2157
2715[ 112.794240] c0 301 FG: fg_soc_irq_handler: triggered 0x25
2716[ 112.799409] c0 3039 SMBCHG: smbchg_external_power_changed: usb type = 4, current_limit = 500, rc = 0
2717[ 112.808755] c0 3039 SMBCHG: smbchg_stay_awake: staying awake: 0x02 (bit 2)
2718[ 112.815464] c0 3039 SMBCHG: smbchg_vfloat_adjust_check: Starting vfloat adjustments
2719[ 112.823746] c0 3066 SMBCHG: smbchg_relax: relaxing: 0x00 (bit 2)
2720[ 112.867423] c3 3322 binder: 3322:3322 transaction failed 29189/0, size 0-0 line 2157
2721[ 113.607121] c2 6291 binder: 6291:6291 transaction failed 29189/0, size 0-0 line 2157
2722[ 113.874436] c3 3322 binder: 3322:3322 transaction failed 29189/0, size 0-0 line 2157
2723[ 114.614153] c2 6291 binder: 6291:6291 transaction failed 29189/0, size 0-0 line 2157
2724[ 114.881452] c3 3322 binder: 3322:3322 transaction failed 29189/0, size 0-0 line 2157
2725[ 115.621186] c2 6291 binder: 6291:6291 transaction failed 29189/0, size 0-0 line 2157
2726[ 115.888460] c3 3322 binder: 3322:3322 transaction failed 29189/0, size 0-0 line 2157
2727[ 116.628207] c2 6291 binder: 6291:6291 transaction failed 29189/0, size 0-0 line 2157
2728[ 116.895462] c3 3322 binder: 3322:3322 transaction failed 29189/0, size 0-0 line 2157
2729[ 117.635227] c2 6291 binder: 6291:6291 transaction failed 29189/0, size 0-0 line 2157
2730[ 117.902463] c3 3322 binder: 3322:3322 transaction failed 29189/0, size 0-0 line 2157
2731[ 118.642245] c2 6291 binder: 6291:6291 transaction failed 29189/0, size 0-0 line 2157
2732[ 118.909474] c3 3322 binder: 3322:3322 transaction failed 29189/0, size 0-0 line 2157
2733[ 119.649339] c2 6291 binder: 6291:6291 transaction failed 29189/0, size 0-0 line 2157
2734[ 119.916512] c3 3322 binder: 3322:3322 transaction failed 29189/0, size 0-0 line 2157
2735[ 120.656369] c2 6291 binder: 6291:6291 transaction failed 29189/0, size 0-0 line 2157
2736[ 120.923518] c3 3322 binder: 3322:3322 transaction failed 29189/0, size 0-0 line 2157
2737[ 121.608883] [BATT] chg_full_check_worker: vol:4389, curr=-73, is_full_count=3, is_full=1 at 121606939300 (2019-03-13 08:19:14.094573091 UTC)
2738[ 121.663400] c2 6291 binder: 6291:6291 transaction failed 29189/0, size 0-0 line 2157
2739[ 121.930527] c3 3322 binder: 3322:3322 transaction failed 29189/0, size 0-0 line 2157
2740[ 122.670426] c2 6291 binder: 6291:6291 transaction failed 29189/0, size 0-0 line 2157
2741[ 122.937535] c3 3322 binder: 3322:3322 transaction failed 29189/0, size 0-0 line 2157
2742[ 123.677453] c2 6291 binder: 6291:6291 transaction failed 29189/0, size 0-0 line 2157
2743[ 123.944536] c3 3322 binder: 3322:3322 transaction failed 29189/0, size 0-0 line 2157
2744[ 124.684483] c2 6291 binder: 6291:6291 transaction failed 29189/0, size 0-0 line 2157
2745[ 124.951542] c3 3322 binder: 3322:3322 transaction failed 29189/0, size 0-0 line 2157
2746[ 125.691512] c2 6291 binder: 6291:6291 transaction failed 29189/0, size 0-0 line 2157
2747[ 125.958549] c3 3322 binder: 3322:3322 transaction failed 29189/0, size 0-0 line 2157
2748[ 126.698527] c2 6291 binder: 6291:6291 transaction failed 29189/0, size 0-0 line 2157
2749[ 126.965556] c3 3322 binder: 3322:3322 transaction failed 29189/0, size 0-0 line 2157
2750[ 127.705544] c2 6291 binder: 6291:6291 transaction failed 29189/0, size 0-0 line 2157
2751[ 127.972562] c3 3322 binder: 3322:3322 transaction failed 29189/0, size 0-0 line 2157
2752[ 128.712575] c2 6291 binder: 6291:6291 transaction failed 29189/0, size 0-0 line 2157