· 6 years ago · Mar 14, 2020, 11:12 PM
1[ 0.000000] microcode: microcode updated early to revision 0xca, date = 2019-10-03
2[ 0.000000] Linux version 5.3.0-29-generic (buildd@lcy01-amd64-024) (gcc version 9.2.1 20191008 (Ubuntu 9.2.1-9ubuntu2)) #31-Ubuntu SMP Fri Jan 17 17:27:26 UTC 2020 (Ubuntu 5.3.0-29.31-generic 5.3.13)
3[ 0.000000] Command line: BOOT_IMAGE=/vmlinuz-5.3.0-29-generic root=/dev/mapper/vgxubuntu-root ro quiet splash vt.handoff=7
4[ 0.000000] KERNEL supported cpus:
5[ 0.000000] Intel GenuineIntel
6[ 0.000000] AMD AuthenticAMD
7[ 0.000000] Hygon HygonGenuine
8[ 0.000000] Centaur CentaurHauls
9[ 0.000000] zhaoxin Shanghai
10[ 0.000000] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers'
11[ 0.000000] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'
12[ 0.000000] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers'
13[ 0.000000] x86/fpu: Supporting XSAVE feature 0x008: 'MPX bounds registers'
14[ 0.000000] x86/fpu: Supporting XSAVE feature 0x010: 'MPX CSR'
15[ 0.000000] x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256
16[ 0.000000] x86/fpu: xstate_offset[3]: 832, xstate_sizes[3]: 64
17[ 0.000000] x86/fpu: xstate_offset[4]: 896, xstate_sizes[4]: 64
18[ 0.000000] x86/fpu: Enabled xstate features 0x1f, context size is 960 bytes, using 'compacted' format.
19[ 0.000000] BIOS-provided physical RAM map:
20[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009efff] usable
21[ 0.000000] BIOS-e820: [mem 0x000000000009f000-0x00000000000fffff] reserved
22[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x0000000067e86fff] usable
23[ 0.000000] BIOS-e820: [mem 0x0000000067e87000-0x0000000068786fff] reserved
24[ 0.000000] BIOS-e820: [mem 0x0000000068787000-0x000000007e99dfff] usable
25[ 0.000000] BIOS-e820: [mem 0x000000007e99e000-0x000000007eb9dfff] type 20
26[ 0.000000] BIOS-e820: [mem 0x000000007eb9e000-0x000000007f59dfff] reserved
27[ 0.000000] BIOS-e820: [mem 0x000000007f59e000-0x000000007fc8dfff] ACPI NVS
28[ 0.000000] BIOS-e820: [mem 0x000000007fc8e000-0x000000007fd0dfff] ACPI data
29[ 0.000000] BIOS-e820: [mem 0x000000007fd0e000-0x000000007fd0efff] usable
30[ 0.000000] BIOS-e820: [mem 0x000000007fd0f000-0x000000008d7fffff] reserved
31[ 0.000000] BIOS-e820: [mem 0x00000000e0000000-0x00000000efffffff] reserved
32[ 0.000000] BIOS-e820: [mem 0x00000000fe000000-0x00000000fe010fff] reserved
33[ 0.000000] BIOS-e820: [mem 0x00000000fed10000-0x00000000fed19fff] reserved
34[ 0.000000] BIOS-e820: [mem 0x00000000fed84000-0x00000000fed84fff] reserved
35[ 0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
36[ 0.000000] BIOS-e820: [mem 0x00000000ff600000-0x00000000ffffffff] reserved
37[ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x00000002707fffff] usable
38[ 0.000000] NX (Execute Disable) protection: active
39[ 0.000000] efi: EFI v2.60 by INSYDE Corp.
40[ 0.000000] efi: ACPI=0x7fd0d000 ACPI 2.0=0x7fd0d014 TPMFinalLog=0x7f575000 SMBIOS=0x7ed18000 SMBIOS 3.0=0x7ed16000 ESRT=0x6f7e1e18
41[ 0.000000] secureboot: Secure boot could not be determined (mode 0)
42[ 0.000000] SMBIOS 3.0.1 present.
43[ 0.000000] DMI: LENOVO 81N7/LNVNB161216, BIOS ALCN28WW(V2.05) 11/25/2019
44[ 0.000000] tsc: Detected 2300.000 MHz processor
45[ 0.000012] tsc: Detected 2299.968 MHz TSC
46[ 0.000012] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
47[ 0.000014] e820: remove [mem 0x000a0000-0x000fffff] usable
48[ 0.000021] last_pfn = 0x270800 max_arch_pfn = 0x400000000
49[ 0.000026] MTRR default type: uncachable
50[ 0.000026] MTRR fixed ranges enabled:
51[ 0.000028] 00000-9FFFF write-back
52[ 0.000029] A0000-BFFFF uncachable
53[ 0.000030] C0000-FFFFF write-protect
54[ 0.000030] MTRR variable ranges enabled:
55[ 0.000032] 0 base 0088000000 mask 7FFF000000 write-back
56[ 0.000033] 1 base 0080000000 mask 7FF8000000 write-back
57[ 0.000034] 2 base 0000000000 mask 7F80000000 write-back
58[ 0.000035] 3 base 0200000000 mask 7E00000000 write-back
59[ 0.000036] 4 base 0100000000 mask 7F00000000 write-back
60[ 0.000037] 5 disabled
61[ 0.000037] 6 disabled
62[ 0.000038] 7 disabled
63[ 0.000038] 8 disabled
64[ 0.000039] 9 disabled
65[ 0.000611] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WP UC- WT
66[ 0.000829] e820: update [mem 0x89000000-0xffffffff] usable ==> reserved
67[ 0.000833] last_pfn = 0x7fd0f max_arch_pfn = 0x400000000
68[ 0.011124] esrt: Reserving ESRT space from 0x000000006f7e1e18 to 0x000000006f7e1ea0.
69[ 0.011138] check: Scanning 1 areas for low memory corruption
70[ 0.011143] Using GB pages for direct mapping
71[ 0.011145] BRK [0x1fb001000, 0x1fb001fff] PGTABLE
72[ 0.011147] BRK [0x1fb002000, 0x1fb002fff] PGTABLE
73[ 0.011148] BRK [0x1fb003000, 0x1fb003fff] PGTABLE
74[ 0.011174] BRK [0x1fb004000, 0x1fb004fff] PGTABLE
75[ 0.011175] BRK [0x1fb005000, 0x1fb005fff] PGTABLE
76[ 0.011263] BRK [0x1fb006000, 0x1fb006fff] PGTABLE
77[ 0.011279] BRK [0x1fb007000, 0x1fb007fff] PGTABLE
78[ 0.011321] BRK [0x1fb008000, 0x1fb008fff] PGTABLE
79[ 0.011336] BRK [0x1fb009000, 0x1fb009fff] PGTABLE
80[ 0.011356] BRK [0x1fb00a000, 0x1fb00afff] PGTABLE
81[ 0.011389] RAMDISK: [mem 0x2e5e3000-0x332e8fff]
82[ 0.011402] ACPI: Early table checksum verification disabled
83[ 0.011405] ACPI: RSDP 0x000000007FD0D014 000024 (v02 LENOVO)
84[ 0.011409] ACPI: XSDT 0x000000007FCED188 0000EC (v01 LENOVO CB-01 00000001 01000013)
85[ 0.011415] ACPI: FACP 0x000000007FCF0000 00010C (v05 LENOVO CB-01 00000001 ACPI 00040000)
86[ 0.011421] ACPI: DSDT 0x000000007FCAC000 03F2DC (v02 LENOVO CB-01 00000001 ACPI 00040000)
87[ 0.011424] ACPI: FACS 0x000000007FC4D000 000040
88[ 0.011427] ACPI: UEFI 0x000000007FD0C000 000236 (v01 LENOVO CB-01 00000001 ACPI 00040000)
89[ 0.011430] ACPI: SSDT 0x000000007FD0B000 0000F5 (v02 LENOVO CB-01 00000001 ACPI 00040000)
90[ 0.011433] ACPI: SSDT 0x000000007FD09000 001B1C (v02 LENOVO CB-01 00000001 ACPI 00040000)
91[ 0.011436] ACPI: SSDT 0x000000007FD05000 0031C6 (v02 LENOVO CB-01 00000001 ACPI 00040000)
92[ 0.011439] ACPI: UEFI 0x000000007FD04000 000042 (v01 LENOVO CB-01 00000001 ACPI 00040000)
93[ 0.011442] ACPI: SSDT 0x000000007FD03000 00045A (v02 LENOVO CB-01 00000001 ACPI 00040000)
94[ 0.011445] ACPI: SSDT 0x000000007FD02000 000046 (v02 LENOVO CB-01 00000001 ACPI 00040000)
95[ 0.011448] ACPI: TPM2 0x000000007FD01000 000034 (v03 LENOVO CB-01 00000001 ACPI 00040000)
96[ 0.011451] ACPI: MSDM 0x000000007FD00000 000055 (v03 LENOVO CB-01 00000001 ACPI 00040000)
97[ 0.011454] ACPI: SSDT 0x000000007FCF8000 0072EF (v02 LENOVO CB-01 00000001 ACPI 00040000)
98[ 0.011457] ACPI: LPIT 0x000000007FCF7000 000094 (v01 LENOVO CB-01 00000001 ACPI 00040000)
99[ 0.011460] ACPI: WSMT 0x000000007FCF6000 000028 (v01 LENOVO CB-01 00000001 ACPI 00040000)
100[ 0.011463] ACPI: SSDT 0x000000007FCF5000 000C2F (v02 LENOVO CB-01 00000001 ACPI 00040000)
101[ 0.011466] ACPI: DBGP 0x000000007FCF4000 000034 (v01 LENOVO CB-01 00000001 ACPI 00040000)
102[ 0.011469] ACPI: DBG2 0x000000007FCF3000 000054 (v00 LENOVO CB-01 00000001 ACPI 00040000)
103[ 0.011472] ACPI: SSDT 0x000000007FCF2000 000B9F (v02 LENOVO CB-01 00000001 ACPI 00040000)
104[ 0.011475] ACPI: ASF! 0x000000007FCF1000 0000A5 (v32 LENOVO CB-01 00000001 ACPI 00040000)
105[ 0.011478] ACPI: HPET 0x000000007FCEF000 000038 (v01 LENOVO CB-01 00000001 ACPI 00040000)
106[ 0.011481] ACPI: APIC 0x000000007FCEE000 00012C (v03 LENOVO CB-01 00000001 ACPI 00040000)
107[ 0.011484] ACPI: MCFG 0x000000007FCEC000 00003C (v01 LENOVO CB-01 00000001 ACPI 00040000)
108[ 0.011487] ACPI: DMAR 0x000000007FCAB000 0000A8 (v01 LENOVO CB-01 00000001 ACPI 00040000)
109[ 0.011490] ACPI: NHLT 0x000000007FCAA000 00002D (v00 LENOVO CB-01 00000001 ACPI 00040000)
110[ 0.011493] ACPI: FPDT 0x000000007FCA9000 000044 (v01 LENOVO CB-01 00000001 ACPI 00040000)
111[ 0.011496] ACPI: BGRT 0x000000007FCA8000 000038 (v01 LENOVO CB-01 00000001 ACPI 00040000)
112[ 0.011506] ACPI: Local APIC address 0xfee00000
113[ 0.011758] No NUMA configuration found
114[ 0.011759] Faking a node at [mem 0x0000000000000000-0x00000002707fffff]
115[ 0.011771] NODE_DATA(0) allocated [mem 0x2707d5000-0x2707fffff]
116[ 0.012064] Zone ranges:
117[ 0.012065] DMA [mem 0x0000000000001000-0x0000000000ffffff]
118[ 0.012066] DMA32 [mem 0x0000000001000000-0x00000000ffffffff]
119[ 0.012068] Normal [mem 0x0000000100000000-0x00000002707fffff]
120[ 0.012069] Device empty
121[ 0.012070] Movable zone start for each node
122[ 0.012074] Early memory node ranges
123[ 0.012075] node 0: [mem 0x0000000000001000-0x000000000009efff]
124[ 0.012076] node 0: [mem 0x0000000000100000-0x0000000067e86fff]
125[ 0.012077] node 0: [mem 0x0000000068787000-0x000000007e99dfff]
126[ 0.012077] node 0: [mem 0x000000007fd0e000-0x000000007fd0efff]
127[ 0.012078] node 0: [mem 0x0000000100000000-0x00000002707fffff]
128[ 0.012163] Zeroed struct page in unavailable ranges: 8131 pages
129[ 0.012164] Initmem setup node 0 [mem 0x0000000000001000-0x00000002707fffff]
130[ 0.012165] On node 0 totalpages: 2025533
131[ 0.012167] DMA zone: 64 pages used for memmap
132[ 0.012167] DMA zone: 23 pages reserved
133[ 0.012168] DMA zone: 3998 pages, LIFO batch:0
134[ 0.012232] DMA32 zone: 8003 pages used for memmap
135[ 0.012233] DMA32 zone: 512159 pages, LIFO batch:63
136[ 0.023853] Normal zone: 23584 pages used for memmap
137[ 0.023853] Normal zone: 1509376 pages, LIFO batch:63
138[ 0.047120] Reserving Intel graphics memory at [mem 0x89800000-0x8d7fffff]
139[ 0.047420] ACPI: PM-Timer IO Port: 0x1808
140[ 0.047421] ACPI: Local APIC address 0xfee00000
141[ 0.047430] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
142[ 0.047431] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
143[ 0.047431] ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
144[ 0.047432] ACPI: LAPIC_NMI (acpi_id[0x04] high edge lint[0x1])
145[ 0.047433] ACPI: LAPIC_NMI (acpi_id[0x05] high edge lint[0x1])
146[ 0.047433] ACPI: LAPIC_NMI (acpi_id[0x06] high edge lint[0x1])
147[ 0.047434] ACPI: LAPIC_NMI (acpi_id[0x07] high edge lint[0x1])
148[ 0.047435] ACPI: LAPIC_NMI (acpi_id[0x08] high edge lint[0x1])
149[ 0.047435] ACPI: LAPIC_NMI (acpi_id[0x09] high edge lint[0x1])
150[ 0.047436] ACPI: LAPIC_NMI (acpi_id[0x0a] high edge lint[0x1])
151[ 0.047437] ACPI: LAPIC_NMI (acpi_id[0x0b] high edge lint[0x1])
152[ 0.047437] ACPI: LAPIC_NMI (acpi_id[0x0c] high edge lint[0x1])
153[ 0.047438] ACPI: LAPIC_NMI (acpi_id[0x0d] high edge lint[0x1])
154[ 0.047438] ACPI: LAPIC_NMI (acpi_id[0x0e] high edge lint[0x1])
155[ 0.047439] ACPI: LAPIC_NMI (acpi_id[0x0f] high edge lint[0x1])
156[ 0.047440] ACPI: LAPIC_NMI (acpi_id[0x10] high edge lint[0x1])
157[ 0.047482] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-119
158[ 0.047485] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
159[ 0.047486] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
160[ 0.047488] ACPI: IRQ0 used by override.
161[ 0.047489] ACPI: IRQ9 used by override.
162[ 0.047491] Using ACPI (MADT) for SMP configuration information
163[ 0.047493] ACPI: HPET id: 0x8086a201 base: 0xfed00000
164[ 0.047501] smpboot: Allowing 4 CPUs, 0 hotplug CPUs
165[ 0.047522] PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
166[ 0.047524] PM: Registered nosave memory: [mem 0x0009f000-0x000fffff]
167[ 0.047526] PM: Registered nosave memory: [mem 0x67e87000-0x68786fff]
168[ 0.047528] PM: Registered nosave memory: [mem 0x7e99e000-0x7eb9dfff]
169[ 0.047528] PM: Registered nosave memory: [mem 0x7eb9e000-0x7f59dfff]
170[ 0.047529] PM: Registered nosave memory: [mem 0x7f59e000-0x7fc8dfff]
171[ 0.047529] PM: Registered nosave memory: [mem 0x7fc8e000-0x7fd0dfff]
172[ 0.047531] PM: Registered nosave memory: [mem 0x7fd0f000-0x8d7fffff]
173[ 0.047532] PM: Registered nosave memory: [mem 0x8d800000-0xdfffffff]
174[ 0.047532] PM: Registered nosave memory: [mem 0xe0000000-0xefffffff]
175[ 0.047533] PM: Registered nosave memory: [mem 0xf0000000-0xfdffffff]
176[ 0.047534] PM: Registered nosave memory: [mem 0xfe000000-0xfe010fff]
177[ 0.047534] PM: Registered nosave memory: [mem 0xfe011000-0xfed0ffff]
178[ 0.047535] PM: Registered nosave memory: [mem 0xfed10000-0xfed19fff]
179[ 0.047535] PM: Registered nosave memory: [mem 0xfed1a000-0xfed83fff]
180[ 0.047536] PM: Registered nosave memory: [mem 0xfed84000-0xfed84fff]
181[ 0.047537] PM: Registered nosave memory: [mem 0xfed85000-0xfedfffff]
182[ 0.047537] PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff]
183[ 0.047538] PM: Registered nosave memory: [mem 0xfee01000-0xff5fffff]
184[ 0.047538] PM: Registered nosave memory: [mem 0xff600000-0xffffffff]
185[ 0.047540] [mem 0x8d800000-0xdfffffff] available for PCI devices
186[ 0.047541] Booting paravirtualized kernel on bare hardware
187[ 0.047544] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns
188[ 0.047551] setup_percpu: NR_CPUS:8192 nr_cpumask_bits:4 nr_cpu_ids:4 nr_node_ids:1
189[ 0.047730] percpu: Embedded 54 pages/cpu s184320 r8192 d28672 u524288
190[ 0.047739] pcpu-alloc: s184320 r8192 d28672 u524288 alloc=1*2097152
191[ 0.047740] pcpu-alloc: [0] 0 1 2 3
192[ 0.047770] Built 1 zonelists, mobility grouping on. Total pages: 1993859
193[ 0.047771] Policy zone: Normal
194[ 0.047772] Kernel command line: BOOT_IMAGE=/vmlinuz-5.3.0-29-generic root=/dev/mapper/vgxubuntu-root ro quiet splash vt.handoff=7
195[ 0.048408] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes, linear)
196[ 0.048675] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes, linear)
197[ 0.048729] mem auto-init: stack:off, heap alloc:on, heap free:off
198[ 0.052929] Calgary: detecting Calgary via BIOS EBDA area
199[ 0.052931] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
200[ 0.071183] Memory: 7704496K/8102132K available (14339K kernel code, 2388K rwdata, 4728K rodata, 2668K init, 5056K bss, 397636K reserved, 0K cma-reserved)
201[ 0.071319] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
202[ 0.071331] ftrace: allocating 43225 entries in 169 pages
203[ 0.091570] rcu: Hierarchical RCU implementation.
204[ 0.091571] rcu: RCU restricting CPUs from NR_CPUS=8192 to nr_cpu_ids=4.
205[ 0.091572] Tasks RCU enabled.
206[ 0.091573] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies.
207[ 0.091574] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
208[ 0.095273] NR_IRQS: 524544, nr_irqs: 1024, preallocated irqs: 16
209[ 0.095755] random: crng done (trusting CPU's manufacturer)
210[ 0.095780] vt handoff: transparent VT on vt#7
211[ 0.095788] Console: colour dummy device 80x25
212[ 0.095793] printk: console [tty0] enabled
213[ 0.095808] ACPI: Core revision 20190703
214[ 0.096334] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 79635855245 ns
215[ 0.096444] APIC: Switch to symmetric I/O mode setup
216[ 0.096447] DMAR: Host address width 39
217[ 0.096448] DMAR: DRHD base: 0x000000fed90000 flags: 0x0
218[ 0.096454] DMAR: dmar0: reg_base_addr fed90000 ver 1:0 cap 1c0000c40660462 ecap 19e2ff0505e
219[ 0.096455] DMAR: DRHD base: 0x000000fed91000 flags: 0x1
220[ 0.096459] DMAR: dmar1: reg_base_addr fed91000 ver 1:0 cap d2008c40660462 ecap f050da
221[ 0.096460] DMAR: RMRR base: 0x0000007f57d000 end: 0x0000007f59cfff
222[ 0.096461] DMAR: RMRR base: 0x00000089000000 end: 0x0000008d7fffff
223[ 0.096463] DMAR-IR: IOAPIC id 2 under DRHD base 0xfed91000 IOMMU 1
224[ 0.096464] DMAR-IR: HPET id 0 under DRHD base 0xfed91000
225[ 0.096465] DMAR-IR: Queued invalidation will be enabled to support x2apic and Intr-remapping.
226[ 0.098648] DMAR-IR: Enabled IRQ remapping in x2apic mode
227[ 0.098649] x2apic enabled
228[ 0.098673] Switched APIC routing to cluster x2apic.
229[ 0.104461] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
230[ 0.124452] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x212717146a7, max_idle_ns: 440795291431 ns
231[ 0.124457] Calibrating delay loop (skipped), value calculated using timer frequency.. 4599.93 BogoMIPS (lpj=9199872)
232[ 0.124459] pid_max: default: 32768 minimum: 301
233[ 0.128499] LSM: Security Framework initializing
234[ 0.128511] Yama: becoming mindful.
235[ 0.128546] AppArmor: AppArmor initialized
236[ 0.128595] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes, linear)
237[ 0.128608] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes, linear)
238[ 0.128795] *** VALIDATE proc ***
239[ 0.128846] *** VALIDATE cgroup1 ***
240[ 0.128847] *** VALIDATE cgroup2 ***
241[ 0.128908] mce: CPU0: Thermal monitoring enabled (TM1)
242[ 0.128929] process: using mwait in idle threads
243[ 0.128932] Last level iTLB entries: 4KB 64, 2MB 8, 4MB 8
244[ 0.128933] Last level dTLB entries: 4KB 64, 2MB 0, 4MB 0, 1GB 4
245[ 0.128937] Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization
246[ 0.128938] Spectre V2 : Mitigation: Full generic retpoline
247[ 0.128939] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch
248[ 0.128939] Spectre V2 : Enabling Restricted Speculation for firmware calls
249[ 0.128941] Spectre V2 : mitigation: Enabling conditional Indirect Branch Prediction Barrier
250[ 0.128941] Spectre V2 : User space: Mitigation: STIBP via seccomp and prctl
251[ 0.128943] Speculative Store Bypass: Mitigation: Speculative Store Bypass disabled via prctl and seccomp
252[ 0.128945] MDS: Mitigation: Clear CPU buffers
253[ 0.129238] Freeing SMP alternatives memory: 36K
254[ 0.132543] TSC deadline timer enabled
255[ 0.132548] smpboot: CPU0: Intel(R) Core(TM) i3-8145U CPU @ 2.10GHz (family: 0x6, model: 0x8e, stepping: 0xb)
256[ 0.132665] Performance Events: PEBS fmt3+, Skylake events, 32-deep LBR, full-width counters, Intel PMU driver.
257[ 0.132671] ... version: 4
258[ 0.132672] ... bit width: 48
259[ 0.132672] ... generic registers: 4
260[ 0.132673] ... value mask: 0000ffffffffffff
261[ 0.132674] ... max period: 00007fffffffffff
262[ 0.132674] ... fixed-purpose events: 3
263[ 0.132675] ... event mask: 000000070000000f
264[ 0.132719] rcu: Hierarchical SRCU implementation.
265[ 0.133629] NMI watchdog: Enabled. Permanently consumes one hw-PMU counter.
266[ 0.133692] smp: Bringing up secondary CPUs ...
267[ 0.133789] x86: Booting SMP configuration:
268[ 0.133790] .... node #0, CPUs: #1 #2
269[ 0.136547] MDS CPU bug present and SMT on, data leak possible. See https://www.kernel.org/doc/html/latest/admin-guide/hw-vuln/mds.html for more details.
270[ 0.136616] #3
271[ 0.137870] smp: Brought up 1 node, 4 CPUs
272[ 0.137870] smpboot: Max logical packages: 1
273[ 0.137870] smpboot: Total of 4 processors activated (18399.74 BogoMIPS)
274[ 0.138238] devtmpfs: initialized
275[ 0.138238] x86/mm: Memory block size: 128MB
276[ 0.141134] PM: Registering ACPI NVS region [mem 0x7f59e000-0x7fc8dfff] (7274496 bytes)
277[ 0.141134] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
278[ 0.141134] futex hash table entries: 1024 (order: 4, 65536 bytes, linear)
279[ 0.141134] pinctrl core: initialized pinctrl subsystem
280[ 0.141134] PM: RTC time: 12:36:52, date: 2020-03-14
281[ 0.141134] NET: Registered protocol family 16
282[ 0.141134] audit: initializing netlink subsys (disabled)
283[ 0.141134] audit: type=2000 audit(1584189412.040:1): state=initialized audit_enabled=0 res=1
284[ 0.141134] EISA bus registered
285[ 0.141134] cpuidle: using governor ladder
286[ 0.141134] cpuidle: using governor menu
287[ 0.141134] ACPI: bus type PCI registered
288[ 0.141134] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
289[ 0.141134] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
290[ 0.141134] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820
291[ 0.141134] PCI: Using configuration type 1 for base access
292[ 0.141134] ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
293[ 0.144466] HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages
294[ 0.144468] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
295[ 0.144547] ACPI: Added _OSI(Module Device)
296[ 0.144548] ACPI: Added _OSI(Processor Device)
297[ 0.144548] ACPI: Added _OSI(3.0 _SCP Extensions)
298[ 0.144549] ACPI: Added _OSI(Processor Aggregator Device)
299[ 0.144550] ACPI: Added _OSI(Linux-Dell-Video)
300[ 0.144551] ACPI: Added _OSI(Linux-Lenovo-NV-HDMI-Audio)
301[ 0.144552] ACPI: Added _OSI(Linux-HPI-Hybrid-Graphics)
302[ 0.220846] ACPI: 9 ACPI AML tables successfully acquired and loaded
303[ 0.232573] ACPI: Dynamic OEM Table Load:
304[ 0.232588] ACPI: SSDT 0xFFFF9F7DE6E6CD00 0000F4 (v02 PmRef Cpu0Psd 00003000 INTL 20160422)
305[ 0.234655] ACPI: \_SB_.PR00: _OSC native thermal LVT Acked
306[ 0.239302] ACPI: Dynamic OEM Table Load:
307[ 0.239310] ACPI: SSDT 0xFFFF9F7DE689B800 000400 (v02 PmRef Cpu0Cst 00003001 INTL 20160422)
308[ 0.241559] ACPI: Dynamic OEM Table Load:
309[ 0.241567] ACPI: SSDT 0xFFFF9F7DE6B9D800 0005A2 (v02 PmRef Cpu0Ist 00003000 INTL 20160422)
310[ 0.243943] ACPI: Dynamic OEM Table Load:
311[ 0.243950] ACPI: SSDT 0xFFFF9F7DE690DC00 00011B (v02 PmRef Cpu0Hwp 00003000 INTL 20160422)
312[ 0.246059] ACPI: Dynamic OEM Table Load:
313[ 0.246067] ACPI: SSDT 0xFFFF9F7DE6B98000 000724 (v02 PmRef HwpLvt 00003000 INTL 20160422)
314[ 0.248611] ACPI: Dynamic OEM Table Load:
315[ 0.248619] ACPI: SSDT 0xFFFF9F7DE6B99800 0005FC (v02 PmRef ApIst 00003000 INTL 20160422)
316[ 0.250985] ACPI: Dynamic OEM Table Load:
317[ 0.250991] ACPI: SSDT 0xFFFF9F7DE689A800 000317 (v02 PmRef ApHwp 00003000 INTL 20160422)
318[ 0.253397] ACPI: Dynamic OEM Table Load:
319[ 0.253405] ACPI: SSDT 0xFFFF9F7DE6EA5000 000AB0 (v02 PmRef ApPsd 00003000 INTL 20160422)
320[ 0.256608] ACPI: Dynamic OEM Table Load:
321[ 0.256615] ACPI: SSDT 0xFFFF9F7DE689B000 00030A (v02 PmRef ApCst 00003000 INTL 20160422)
322[ 0.264348] ACPI: EC: EC started
323[ 0.264348] ACPI: EC: interrupt blocked
324[ 0.265232] ACPI: \_SB_.PCI0.LPCB.EC0_: Used as first EC
325[ 0.265234] ACPI: \_SB_.PCI0.LPCB.EC0_: GPE=0x50, EC_CMD/EC_SC=0x66, EC_DATA=0x62
326[ 0.265236] ACPI: \_SB_.PCI0.LPCB.EC0_: Boot DSDT EC used to handle transactions
327[ 0.265236] ACPI: Interpreter enabled
328[ 0.265302] ACPI: (supports S0 S3 S4 S5)
329[ 0.265303] ACPI: Using IOAPIC for interrupt routing
330[ 0.265355] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
331[ 0.269403] ACPI: Enabled 7 GPEs in block 00 to 7F
332[ 0.277463] ACPI: Power Resource [USBC] (on)
333[ 0.296372] ACPI: Power Resource [V0PR] (on)
334[ 0.296668] ACPI: Power Resource [V1PR] (on)
335[ 0.296953] ACPI: Power Resource [V2PR] (on)
336[ 0.307139] ACPI: Power Resource [WRST] (on)
337[ 0.307505] acpi ABCD0000:00: ACPI dock station (docks/bays count: 1)
338[ 0.315703] ACPI: Power Resource [PIN] (off)
339[ 0.316327] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-fe])
340[ 0.316334] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI HPX-Type3]
341[ 0.319123] acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug SHPCHotplug PME AER PCIeCapability LTR]
342[ 0.322716] PCI host bridge to bus 0000:00
343[ 0.322719] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window]
344[ 0.322720] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window]
345[ 0.322721] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
346[ 0.322723] pci_bus 0000:00: root bus resource [mem 0x8d800000-0xdfffffff window]
347[ 0.322724] pci_bus 0000:00: root bus resource [mem 0xfc800000-0xfe7fffff window]
348[ 0.322725] pci_bus 0000:00: root bus resource [bus 00-fe]
349[ 0.322737] pci 0000:00:00.0: [8086:3e35] type 00 class 0x060000
350[ 0.324369] pci 0000:00:02.0: [8086:3ea0] type 00 class 0x030000
351[ 0.324382] pci 0000:00:02.0: reg 0x10: [mem 0xa0000000-0xa0ffffff 64bit]
352[ 0.324388] pci 0000:00:02.0: reg 0x18: [mem 0x90000000-0x9fffffff 64bit pref]
353[ 0.324393] pci 0000:00:02.0: reg 0x20: [io 0x3000-0x303f]
354[ 0.324412] pci 0000:00:02.0: BAR 2: assigned to efifb
355[ 0.325702] pci 0000:00:04.0: [8086:1903] type 00 class 0x118000
356[ 0.325717] pci 0000:00:04.0: reg 0x10: [mem 0xa1510000-0xa1517fff 64bit]
357[ 0.327066] pci 0000:00:08.0: [8086:1911] type 00 class 0x088000
358[ 0.327080] pci 0000:00:08.0: reg 0x10: [mem 0xa1520000-0xa1520fff 64bit]
359[ 0.328409] pci 0000:00:12.0: [8086:9df9] type 00 class 0x118000
360[ 0.328435] pci 0000:00:12.0: reg 0x10: [mem 0xa1521000-0xa1521fff 64bit]
361[ 0.329789] pci 0000:00:14.0: [8086:9ded] type 00 class 0x0c0330
362[ 0.329811] pci 0000:00:14.0: reg 0x10: [mem 0xa1500000-0xa150ffff 64bit]
363[ 0.329880] pci 0000:00:14.0: PME# supported from D3hot D3cold
364[ 0.331214] pci 0000:00:14.2: [8086:9def] type 00 class 0x050000
365[ 0.331238] pci 0000:00:14.2: reg 0x10: [mem 0xa151c000-0xa151dfff 64bit]
366[ 0.331252] pci 0000:00:14.2: reg 0x18: [mem 0xa1522000-0xa1522fff 64bit]
367[ 0.332654] pci 0000:00:15.0: [8086:9de8] type 00 class 0x0c8000
368[ 0.332789] pci 0000:00:15.0: reg 0x10: [mem 0x00000000-0x00000fff 64bit]
369[ 0.334511] pci 0000:00:15.1: [8086:9de9] type 00 class 0x0c8000
370[ 0.334648] pci 0000:00:15.1: reg 0x10: [mem 0x00000000-0x00000fff 64bit]
371[ 0.336366] pci 0000:00:15.2: [8086:9dea] type 00 class 0x0c8000
372[ 0.336528] pci 0000:00:15.2: reg 0x10: [mem 0x00000000-0x00000fff 64bit]
373[ 0.338183] pci 0000:00:16.0: [8086:9de0] type 00 class 0x078000
374[ 0.338212] pci 0000:00:16.0: reg 0x10: [mem 0xa1526000-0xa1526fff 64bit]
375[ 0.338297] pci 0000:00:16.0: PME# supported from D3hot
376[ 0.339677] pci 0000:00:17.0: [8086:9dd3] type 00 class 0x010601
377[ 0.339698] pci 0000:00:17.0: reg 0x10: [mem 0xa151e000-0xa151ffff]
378[ 0.339707] pci 0000:00:17.0: reg 0x14: [mem 0xa152a000-0xa152a0ff]
379[ 0.339717] pci 0000:00:17.0: reg 0x18: [io 0x3080-0x3087]
380[ 0.339726] pci 0000:00:17.0: reg 0x1c: [io 0x3088-0x308b]
381[ 0.339735] pci 0000:00:17.0: reg 0x20: [io 0x3060-0x307f]
382[ 0.339745] pci 0000:00:17.0: reg 0x24: [mem 0xa1529000-0xa15297ff]
383[ 0.339796] pci 0000:00:17.0: PME# supported from D3hot
384[ 0.341139] pci 0000:00:1d.0: [8086:9db0] type 01 class 0x060400
385[ 0.341232] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
386[ 0.341250] pci 0000:00:1d.0: PTM enabled (root), 4dns granularity
387[ 0.342612] pci 0000:00:1d.2: [8086:9db2] type 01 class 0x060400
388[ 0.342706] pci 0000:00:1d.2: PME# supported from D0 D3hot D3cold
389[ 0.342723] pci 0000:00:1d.2: PTM enabled (root), 4dns granularity
390[ 0.344086] pci 0000:00:1d.4: [8086:9db4] type 01 class 0x060400
391[ 0.344202] pci 0000:00:1d.4: PME# supported from D0 D3hot D3cold
392[ 0.344221] pci 0000:00:1d.4: PTM enabled (root), 4dns granularity
393[ 0.345609] pci 0000:00:1f.0: [8086:9d84] type 00 class 0x060100
394[ 0.347155] pci 0000:00:1f.3: [8086:9dc8] type 00 class 0x040380
395[ 0.347222] pci 0000:00:1f.3: reg 0x10: [mem 0xa1518000-0xa151bfff 64bit]
396[ 0.347285] pci 0000:00:1f.3: reg 0x20: [mem 0xa1200000-0xa12fffff 64bit]
397[ 0.347417] pci 0000:00:1f.3: PME# supported from D3hot D3cold
398[ 0.348882] pci 0000:00:1f.4: [8086:9da3] type 00 class 0x0c0500
399[ 0.348912] pci 0000:00:1f.4: reg 0x10: [mem 0xa1527000-0xa15270ff 64bit]
400[ 0.348943] pci 0000:00:1f.4: reg 0x20: [io 0x3040-0x305f]
401[ 0.350278] pci 0000:00:1f.5: [8086:9da4] type 00 class 0x0c8000
402[ 0.350296] pci 0000:00:1f.5: reg 0x10: [mem 0xfe010000-0xfe010fff]
403[ 0.351669] pci 0000:01:00.0: [10ec:522a] type 00 class 0xff0000
404[ 0.351700] pci 0000:01:00.0: reg 0x10: [mem 0xa1400000-0xa1400fff]
405[ 0.351848] pci 0000:01:00.0: supports D1 D2
406[ 0.351850] pci 0000:01:00.0: PME# supported from D1 D2 D3hot D3cold
407[ 0.351991] pci 0000:00:1d.0: PCI bridge to [bus 01]
408[ 0.351996] pci 0000:00:1d.0: bridge window [mem 0xa1400000-0xa14fffff]
409[ 0.352302] pci 0000:02:00.0: [168c:0042] type 00 class 0x028000
410[ 0.352675] pci 0000:02:00.0: reg 0x10: [mem 0xa1000000-0xa11fffff 64bit]
411[ 0.354096] pci 0000:02:00.0: PME# supported from D0 D3hot D3cold
412[ 0.355373] pci 0000:00:1d.2: PCI bridge to [bus 02]
413[ 0.355377] pci 0000:00:1d.2: bridge window [mem 0xa1000000-0xa11fffff]
414[ 0.355614] pci 0000:03:00.0: [144d:a808] type 00 class 0x010802
415[ 0.355645] pci 0000:03:00.0: reg 0x10: [mem 0xa1300000-0xa1303fff 64bit]
416[ 0.356054] pci 0000:00:1d.4: PCI bridge to [bus 03]
417[ 0.356059] pci 0000:00:1d.4: bridge window [mem 0xa1300000-0xa13fffff]
418[ 0.360457] ACPI: EC: interrupt unblocked
419[ 0.360457] ACPI: EC: event unblocked
420[ 0.360457] ACPI: \_SB_.PCI0.LPCB.EC0_: GPE=0x50, EC_CMD/EC_SC=0x66, EC_DATA=0x62
421[ 0.360457] ACPI: \_SB_.PCI0.LPCB.EC0_: Boot DSDT EC used to handle transactions and events
422[ 0.360487] SCSI subsystem initialized
423[ 0.360501] libata version 3.00 loaded.
424[ 0.360501] pci 0000:00:02.0: vgaarb: setting as boot VGA device
425[ 0.360501] pci 0000:00:02.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
426[ 0.360501] pci 0000:00:02.0: vgaarb: bridge control possible
427[ 0.360501] vgaarb: loaded
428[ 0.360501] ACPI: bus type USB registered
429[ 0.360501] usbcore: registered new interface driver usbfs
430[ 0.360506] usbcore: registered new interface driver hub
431[ 0.360521] usbcore: registered new device driver usb
432[ 0.360554] pps_core: LinuxPPS API ver. 1 registered
433[ 0.360555] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
434[ 0.360557] PTP clock support registered
435[ 0.360575] EDAC MC: Ver: 3.0.0
436[ 0.364491] Registered efivars operations
437[ 0.364533] PCI: Using ACPI for IRQ routing
438[ 0.408873] PCI: pci_cache_line_size set to 64 bytes
439[ 0.409648] e820: reserve RAM buffer [mem 0x0009f000-0x0009ffff]
440[ 0.409650] e820: reserve RAM buffer [mem 0x67e87000-0x67ffffff]
441[ 0.409651] e820: reserve RAM buffer [mem 0x7e99e000-0x7fffffff]
442[ 0.409652] e820: reserve RAM buffer [mem 0x7fd0f000-0x7fffffff]
443[ 0.409653] e820: reserve RAM buffer [mem 0x270800000-0x273ffffff]
444[ 0.409761] NetLabel: Initializing
445[ 0.409761] NetLabel: domain hash size = 128
446[ 0.409762] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO
447[ 0.409777] NetLabel: unlabeled traffic allowed by default
448[ 0.409794] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
449[ 0.409794] hpet0: 8 comparators, 64-bit 24.000000 MHz counter
450[ 0.412457] clocksource: Switched to clocksource tsc-early
451[ 0.426037] VFS: Disk quotas dquot_6.6.0
452[ 0.426052] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
453[ 0.426083] *** VALIDATE hugetlbfs ***
454[ 0.426173] AppArmor: AppArmor Filesystem Enabled
455[ 0.426205] pnp: PnP ACPI init
456[ 0.426370] system 00:00: [mem 0x40000000-0x403fffff] could not be reserved
457[ 0.426375] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
458[ 0.426826] system 00:01: [io 0x1800-0x18fe] has been reserved
459[ 0.426828] system 00:01: [mem 0xfd000000-0xfd69ffff] has been reserved
460[ 0.426829] system 00:01: [mem 0xfd6b0000-0xfd6cffff] has been reserved
461[ 0.426831] system 00:01: [mem 0xfd6f0000-0xfdffffff] has been reserved
462[ 0.426832] system 00:01: [mem 0xfe000000-0xfe01ffff] could not be reserved
463[ 0.426833] system 00:01: [mem 0xfe200000-0xfe7fffff] has been reserved
464[ 0.426835] system 00:01: [mem 0xfc7e0000-0xfc7e0fff] has been reserved
465[ 0.426836] system 00:01: [mem 0xff000000-0xffffffff] could not be reserved
466[ 0.426840] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
467[ 0.427277] system 00:02: [io 0x2000-0x20fe] has been reserved
468[ 0.427281] system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active)
469[ 0.427430] system 00:03: [io 0x0680-0x069f] has been reserved
470[ 0.427431] system 00:03: [io 0x164e-0x164f] has been reserved
471[ 0.427433] system 00:03: [io 0xfd60-0xfd63] has been reserved
472[ 0.427436] system 00:03: Plug and Play ACPI device, IDs PNP0c02 (active)
473[ 0.427499] pnp 00:04: Plug and Play ACPI device, IDs PNP0b00 (active)
474[ 0.427628] system 00:05: [io 0x1854-0x1857] has been reserved
475[ 0.427632] system 00:05: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)
476[ 0.427680] pnp 00:06: Plug and Play ACPI device, IDs PNP0303 (active)
477[ 0.429602] system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active)
478[ 0.430651] system 00:08: [mem 0xfed10000-0xfed17fff] has been reserved
479[ 0.430653] system 00:08: [mem 0xfed18000-0xfed18fff] has been reserved
480[ 0.430654] system 00:08: [mem 0xfed19000-0xfed19fff] has been reserved
481[ 0.430655] system 00:08: [mem 0xe0000000-0xefffffff] has been reserved
482[ 0.430657] system 00:08: [mem 0xfed20000-0xfed3ffff] has been reserved
483[ 0.430658] system 00:08: [mem 0xfed90000-0xfed93fff] could not be reserved
484[ 0.430660] system 00:08: [mem 0xfed45000-0xfed8ffff] could not be reserved
485[ 0.430661] system 00:08: [mem 0xfee00000-0xfeefffff] could not be reserved
486[ 0.430665] system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active)
487[ 0.431314] pnp: PnP ACPI: found 9 devices
488[ 0.432709] thermal_sys: Registered thermal governor 'fair_share'
489[ 0.432710] thermal_sys: Registered thermal governor 'bang_bang'
490[ 0.432711] thermal_sys: Registered thermal governor 'step_wise'
491[ 0.432711] thermal_sys: Registered thermal governor 'user_space'
492[ 0.432712] thermal_sys: Registered thermal governor 'power_allocator'
493[ 0.437217] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
494[ 0.437262] pci 0000:00:15.0: BAR 0: assigned [mem 0x8d800000-0x8d800fff 64bit]
495[ 0.437321] pci 0000:00:15.1: BAR 0: assigned [mem 0x8d801000-0x8d801fff 64bit]
496[ 0.437378] pci 0000:00:15.2: BAR 0: assigned [mem 0x8d802000-0x8d802fff 64bit]
497[ 0.437436] pci 0000:00:1d.0: PCI bridge to [bus 01]
498[ 0.437440] pci 0000:00:1d.0: bridge window [mem 0xa1400000-0xa14fffff]
499[ 0.437446] pci 0000:00:1d.2: PCI bridge to [bus 02]
500[ 0.437450] pci 0000:00:1d.2: bridge window [mem 0xa1000000-0xa11fffff]
501[ 0.437455] pci 0000:00:1d.4: PCI bridge to [bus 03]
502[ 0.437466] pci 0000:00:1d.4: bridge window [mem 0xa1300000-0xa13fffff]
503[ 0.437477] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window]
504[ 0.437478] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window]
505[ 0.437479] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
506[ 0.437480] pci_bus 0000:00: resource 7 [mem 0x8d800000-0xdfffffff window]
507[ 0.437482] pci_bus 0000:00: resource 8 [mem 0xfc800000-0xfe7fffff window]
508[ 0.437483] pci_bus 0000:01: resource 1 [mem 0xa1400000-0xa14fffff]
509[ 0.437484] pci_bus 0000:02: resource 1 [mem 0xa1000000-0xa11fffff]
510[ 0.437486] pci_bus 0000:03: resource 1 [mem 0xa1300000-0xa13fffff]
511[ 0.437721] NET: Registered protocol family 2
512[ 0.437911] tcp_listen_portaddr_hash hash table entries: 4096 (order: 4, 65536 bytes, linear)
513[ 0.437965] TCP established hash table entries: 65536 (order: 7, 524288 bytes, linear)
514[ 0.438110] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes, linear)
515[ 0.438198] TCP: Hash tables configured (established 65536 bind 65536)
516[ 0.438234] UDP hash table entries: 4096 (order: 5, 131072 bytes, linear)
517[ 0.438260] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes, linear)
518[ 0.438342] NET: Registered protocol family 1
519[ 0.438347] NET: Registered protocol family 44
520[ 0.438359] pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
521[ 0.440384] PCI: CLS 64 bytes, default 64
522[ 0.440423] Trying to unpack rootfs image as initramfs...
523[ 0.658884] Freeing initrd memory: 78872K
524[ 0.684526] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
525[ 0.684534] software IO TLB: mapped [mem 0x7a272000-0x7e272000] (64MB)
526[ 0.684843] check: Scanning for low memory corruption every 60 seconds
527[ 0.686871] Initialise system trusted keyrings
528[ 0.686880] Key type blacklist registered
529[ 0.686916] workingset: timestamp_bits=36 max_order=21 bucket_order=0
530[ 0.688402] zbud: loaded
531[ 0.688830] squashfs: version 4.0 (2009/01/31) Phillip Lougher
532[ 0.689004] fuse: init (API version 7.31)
533[ 0.689141] Platform Keyring initialized
534[ 0.694516] Key type asymmetric registered
535[ 0.694517] Asymmetric key parser 'x509' registered
536[ 0.694527] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 244)
537[ 0.694566] io scheduler mq-deadline registered
538[ 0.695020] pcieport 0000:00:1d.0: PME: Signaling with IRQ 122
539[ 0.695090] pcieport 0000:00:1d.0: AER: enabled with IRQ 122
540[ 0.695141] pcieport 0000:00:1d.0: DPC: error containment capabilities: Int Msg #0, RPExt+ PoisonedTLP+ SwTrigger+ RP PIO Log 4, DL_ActiveErr+
541[ 0.695440] pcieport 0000:00:1d.2: PME: Signaling with IRQ 123
542[ 0.695721] pcieport 0000:00:1d.4: PME: Signaling with IRQ 124
543[ 0.695785] pcieport 0000:00:1d.4: AER: enabled with IRQ 124
544[ 0.695847] pcieport 0000:00:1d.4: DPC: error containment capabilities: Int Msg #0, RPExt+ PoisonedTLP+ SwTrigger+ RP PIO Log 4, DL_ActiveErr+
545[ 0.695941] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
546[ 0.696016] efifb: probing for efifb
547[ 0.696044] efifb: showing boot graphics
548[ 0.697604] efifb: framebuffer at 0x90000000, using 8128k, total 8128k
549[ 0.697605] efifb: mode is 1920x1080x32, linelength=7680, pages=1
550[ 0.697606] efifb: scrolling: redraw
551[ 0.697607] efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0
552[ 0.697654] fbcon: Deferring console take-over
553[ 0.697655] fb0: EFI VGA frame buffer device
554[ 0.697664] intel_idle: MWAIT substates: 0x11142120
555[ 0.697665] intel_idle: v0.4.1 model 0x8E
556[ 0.697925] intel_idle: lapic_timer_reliable_states 0xffffffff
557[ 0.698105] ACPI: AC Adapter [ACAD] (off-line)
558[ 0.698187] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:19/PNP0C0D:00/input/input0
559[ 0.698193] ACPI: Lid Switch [LID0]
560[ 0.698250] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input1
561[ 0.698262] ACPI: Power Button [PWRB]
562[ 0.698293] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
563[ 0.698300] ACPI: Power Button [PWRF]
564[ 0.699491] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
565[ 0.705063] Linux agpgart interface v0.103
566[ 0.771592] loop: module loaded
567[ 0.771855] libphy: Fixed MDIO Bus: probed
568[ 0.771856] tun: Universal TUN/TAP device driver, 1.6
569[ 0.771913] PPP generic driver version 2.4.2
570[ 0.771991] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
571[ 0.771994] ehci-pci: EHCI PCI platform driver
572[ 0.772010] ehci-platform: EHCI generic platform driver
573[ 0.772025] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
574[ 0.772026] ohci-pci: OHCI PCI platform driver
575[ 0.772036] ohci-platform: OHCI generic platform driver
576[ 0.772044] uhci_hcd: USB Universal Host Controller Interface driver
577[ 0.772324] xhci_hcd 0000:00:14.0: xHCI Host Controller
578[ 0.772331] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 1
579[ 0.773423] xhci_hcd 0000:00:14.0: hcc params 0x200077c1 hci version 0x110 quirks 0x0000000000009810
580[ 0.773428] xhci_hcd 0000:00:14.0: cache line size of 64 is not supported
581[ 0.773672] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.03
582[ 0.773674] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
583[ 0.773676] usb usb1: Product: xHCI Host Controller
584[ 0.773678] usb usb1: Manufacturer: Linux 5.3.0-29-generic xhci-hcd
585[ 0.773680] usb usb1: SerialNumber: 0000:00:14.0
586[ 0.773886] hub 1-0:1.0: USB hub found
587[ 0.773909] hub 1-0:1.0: 12 ports detected
588[ 0.774144] battery: ACPI: Battery Slot [BAT1] (battery present)
589[ 0.774753] xhci_hcd 0000:00:14.0: xHCI Host Controller
590[ 0.774756] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 2
591[ 0.774759] xhci_hcd 0000:00:14.0: Host supports USB 3.1 Enhanced SuperSpeed
592[ 0.774793] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.03
593[ 0.774794] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
594[ 0.774795] usb usb2: Product: xHCI Host Controller
595[ 0.774797] usb usb2: Manufacturer: Linux 5.3.0-29-generic xhci-hcd
596[ 0.774797] usb usb2: SerialNumber: 0000:00:14.0
597[ 0.774918] hub 2-0:1.0: USB hub found
598[ 0.774932] hub 2-0:1.0: 6 ports detected
599[ 0.775188] usb: port power management may be unreliable
600[ 0.775347] i8042: PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1
601[ 0.775348] i8042: PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp
602[ 0.776787] serio: i8042 KBD port at 0x60,0x64 irq 1
603[ 0.776984] mousedev: PS/2 mouse device common for all mice
604[ 0.777416] rtc_cmos 00:04: RTC can wake from S4
605[ 0.778231] rtc_cmos 00:04: registered as rtc0
606[ 0.778244] rtc_cmos 00:04: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
607[ 0.778250] i2c /dev entries driver
608[ 0.778305] device-mapper: uevent: version 1.0.3
609[ 0.778411] device-mapper: ioctl: 4.40.0-ioctl (2019-01-18) initialised: dm-devel@redhat.com
610[ 0.778432] platform eisa.0: Probing EISA bus 0
611[ 0.778433] platform eisa.0: EISA: Cannot allocate resource for mainboard
612[ 0.778435] platform eisa.0: Cannot allocate resource for EISA slot 1
613[ 0.778436] platform eisa.0: Cannot allocate resource for EISA slot 2
614[ 0.778437] platform eisa.0: Cannot allocate resource for EISA slot 3
615[ 0.778438] platform eisa.0: Cannot allocate resource for EISA slot 4
616[ 0.778439] platform eisa.0: Cannot allocate resource for EISA slot 5
617[ 0.778440] platform eisa.0: Cannot allocate resource for EISA slot 6
618[ 0.778441] platform eisa.0: Cannot allocate resource for EISA slot 7
619[ 0.778442] platform eisa.0: Cannot allocate resource for EISA slot 8
620[ 0.778443] platform eisa.0: EISA: Detected 0 cards
621[ 0.778446] intel_pstate: Intel P-state driver initializing
622[ 0.778736] intel_pstate: HWP enabled
623[ 0.778759] ledtrig-cpu: registered to indicate activity on CPUs
624[ 0.778761] EFI Variables Facility v0.08 2004-May-17
625[ 0.788395] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input3
626[ 0.807481] intel_pmc_core INT33A1:00: initialized
627[ 0.807665] NET: Registered protocol family 10
628[ 0.813010] Segment Routing with IPv6
629[ 0.813026] NET: Registered protocol family 17
630[ 0.813080] Key type dns_resolver registered
631[ 0.813331] RAS: Correctable Errors collector initialized.
632[ 0.813353] microcode: sig=0x806eb, pf=0x80, revision=0xca
633[ 0.813412] microcode: Microcode Update Driver: v2.2.
634[ 0.813435] sched_clock: Marking stable (808659366, 4750116)->(818972569, -5563087)
635[ 0.813563] registered taskstats version 1
636[ 0.813569] Loading compiled-in X.509 certificates
637[ 0.814869] Loaded X.509 cert 'Build time autogenerated kernel key: e010219b5d6ca0f28448e71ca03baad031d32c9b'
638[ 0.814887] zswap: loaded using pool lzo/zbud
639[ 0.819851] Key type big_key registered
640[ 0.819855] Key type trusted registered
641[ 0.822366] Key type encrypted registered
642[ 0.822369] AppArmor: AppArmor sha1 policy hashing enabled
643[ 0.823842] ima: Allocated hash algorithm: sha1
644[ 1.000919] No architecture policies found
645[ 1.000930] evm: Initialising EVM extended attributes:
646[ 1.000930] evm: security.selinux
647[ 1.000931] evm: security.SMACK64
648[ 1.000931] evm: security.SMACK64EXEC
649[ 1.000931] evm: security.SMACK64TRANSMUTE
650[ 1.000932] evm: security.SMACK64MMAP
651[ 1.000932] evm: security.apparmor
652[ 1.000932] evm: security.ima
653[ 1.000933] evm: security.capability
654[ 1.000946] evm: HMAC attrs: 0x1
655[ 1.001944] PM: Magic number: 12:884:632
656[ 1.002191] rtc_cmos 00:04: setting system clock to 2020-03-14T12:36:53 UTC (1584189413)
657[ 1.003090] Freeing unused decrypted memory: 2040K
658[ 1.003403] Freeing unused kernel image memory: 2668K
659[ 1.003404] Write protecting the kernel read-only data: 22528k
660[ 1.003727] Freeing unused kernel image memory: 2008K
661[ 1.003861] Freeing unused kernel image memory: 1416K
662[ 1.010607] x86/mm: Checked W+X mappings: passed, no W+X pages found.
663[ 1.010609] Run /init as init process
664[ 1.065312] acpi PNP0C14:02: duplicate WMI GUID 05901221-D566-11D1-B2F0-00A0C9062910 (first instance was on PNP0C14:01)
665[ 1.065354] acpi PNP0C14:03: duplicate WMI GUID 05901221-D566-11D1-B2F0-00A0C9062910 (first instance was on PNP0C14:01)
666[ 1.066501] hidraw: raw HID events driver (C) Jiri Kosina
667[ 1.071748] intel-lpss 0000:00:15.0: enabling device (0000 -> 0002)
668[ 1.073380] ahci 0000:00:17.0: version 3.0
669[ 1.073733] ahci 0000:00:17.0: AHCI 0001.0301 32 slots 1 ports 6 Gbps 0x2 impl SATA mode
670[ 1.073735] ahci 0000:00:17.0: flags: 64bit ncq sntf pm clo only pio slum part deso sadm sds apst
671[ 1.074191] scsi host0: ahci
672[ 1.076502] scsi host1: ahci
673[ 1.076563] ata1: DUMMY
674[ 1.076569] ata2: SATA max UDMA/133 abar m2048@0xa1529000 port 0xa1529180 irq 127
675[ 1.079065] i801_smbus 0000:00:1f.4: SPD Write Disable is set
676[ 1.079125] i801_smbus 0000:00:1f.4: SMBus using PCI interrupt
677[ 1.084492] i2c_hid i2c-MSFT0001:02: i2c-MSFT0001:02 supply vdd not found, using dummy regulator
678[ 1.084502] i2c_hid i2c-MSFT0001:02: i2c-MSFT0001:02 supply vddl not found, using dummy regulator
679[ 1.085935] cryptd: max_cpu_qlen set to 1000
680[ 1.110222] intel-lpss 0000:00:15.1: enabling device (0000 -> 0002)
681[ 1.114973] intel-lpss 0000:00:15.2: enabling device (0000 -> 0002)
682[ 1.116469] usb 1-2: new full-speed USB device number 2 using xhci_hcd
683[ 1.125016] AVX2 version of gcm_enc/dec engaged.
684[ 1.125016] AES CTR mode by8 optimization enabled
685[ 1.126065] nvme nvme0: pci function 0000:03:00.0
686[ 1.131764] checking generic (90000000 7f0000) vs hw (90000000 10000000)
687[ 1.131766] fb0: switching to inteldrmfb from EFI VGA
688[ 1.131815] i915 0000:00:02.0: vgaarb: deactivate vga console
689[ 1.140465] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
690[ 1.140466] [drm] Driver supports precise vblank timestamp query.
691[ 1.144574] i915 0000:00:02.0: vgaarb: changed VGA decodes: olddecodes=io+mem,decodes=io+mem:owns=io+mem
692[ 1.144934] [drm] Finished loading DMC firmware i915/kbl_dmc_ver1_04.bin (v1.4)
693[ 1.165561] [drm] Initialized i915 1.6.0 20190619 for 0000:00:02.0 on minor 0
694[ 1.167071] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no)
695[ 1.167354] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input4
696[ 1.178463] fbcon: i915drmfb (fb0) is primary device
697[ 1.178464] fbcon: Deferring console take-over
698[ 1.178466] i915 0000:00:02.0: fb0: i915drmfb frame buffer device
699[ 1.274955] usb 1-2: config 1 has an invalid interface number: 1 but max is 0
700[ 1.274956] usb 1-2: config 1 has no interface number 0
701[ 1.288203] usb 1-2: New USB device found, idVendor=10f5, idProduct=0244, bcdDevice= 1.00
702[ 1.288204] usb 1-2: New USB device strings: Mfr=2, Product=3, SerialNumber=0
703[ 1.288205] usb 1-2: Product: Turtle Beach PX3 Battery Charger
704[ 1.288206] usb 1-2: Manufacturer: Turtle Beach
705[ 1.341721] nvme nvme0: Shutdown timeout set to 8 seconds
706[ 1.346861] nvme nvme0: 4/0/0 default/read/poll queues
707[ 1.355954] nvme0n1: p1 p2 p3
708[ 1.394087] ata2: SATA link down (SStatus 4 SControl 300)
709[ 1.398295] input: MSFT0001:02 04F3:304B Mouse as /devices/pci0000:00/0000:00:15.0/i2c_designware.0/i2c-1/i2c-MSFT0001:02/0018:04F3:304B.0001/input/input5
710[ 1.398374] input: MSFT0001:02 04F3:304B Touchpad as /devices/pci0000:00/0000:00:15.0/i2c_designware.0/i2c-1/i2c-MSFT0001:02/0018:04F3:304B.0001/input/input6
711[ 1.398432] hid-generic 0018:04F3:304B.0001: input,hidraw0: I2C HID v1.00 Mouse [MSFT0001:02 04F3:304B] on i2c-MSFT0001:02
712[ 1.420654] usb 1-6: new high-speed USB device number 3 using xhci_hcd
713[ 1.581427] usb 1-6: New USB device found, idVendor=13d3, idProduct=56b2, bcdDevice=17.11
714[ 1.581428] usb 1-6: New USB device strings: Mfr=1, Product=2, SerialNumber=0
715[ 1.581429] usb 1-6: Product: Integrated Camera
716[ 1.581430] usb 1-6: Manufacturer: SunplusIT Inc
717[ 1.701127] tsc: Refined TSC clocksource calibration: 2303.981 MHz
718[ 1.701133] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x2135e5bee34, max_idle_ns: 440795224185 ns
719[ 1.701170] clocksource: Switched to clocksource tsc
720[ 1.708997] usb 1-10: new full-speed USB device number 4 using xhci_hcd
721[ 1.862694] usb 1-10: config 1 interface 1 altsetting 0 endpoint 0x83 has wMaxPacketSize 0, skipping
722[ 1.862695] usb 1-10: config 1 interface 1 altsetting 0 endpoint 0x3 has wMaxPacketSize 0, skipping
723[ 1.862698] usb 1-10: New USB device found, idVendor=0cf3, idProduct=e500, bcdDevice= 0.01
724[ 1.862699] usb 1-10: New USB device strings: Mfr=0, Product=0, SerialNumber=0
725[ 1.894695] input: Turtle Beach Turtle Beach PX3 Battery Charger Consumer Control as /devices/pci0000:00/0000:00:14.0/usb1/1-2/1-2:1.1/0003:10F5:0244.0002/input/input7
726[ 1.953127] input: Turtle Beach Turtle Beach PX3 Battery Charger as /devices/pci0000:00/0000:00:14.0/usb1/1-2/1-2:1.1/0003:10F5:0244.0002/input/input8
727[ 1.953226] hid-generic 0003:10F5:0244.0002: input,hiddev0,hidraw1: USB HID v1.11 Device [Turtle Beach Turtle Beach PX3 Battery Charger] on usb-0000:00:14.0-2/input1
728[ 1.953264] usbcore: registered new interface driver usbhid
729[ 1.953265] usbhid: USB HID core driver
730[ 12.082379] EXT4-fs (dm-1): mounted filesystem with ordered data mode. Opts: (null)
731[ 12.185342] systemd[1]: Inserted module 'autofs4'
732[ 12.246386] systemd[1]: systemd 242 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN2 -IDN +PCRE2 default-hierarchy=hybrid)
733[ 12.265007] systemd[1]: Detected architecture x86-64.
734[ 12.266631] systemd[1]: Set hostname to <DoxBox>.
735[ 12.266979] systemd[1]: Failed to bump fs.file-max, ignoring: Invalid argument
736[ 12.314569] systemd[1]: /lib/systemd/system/dbus.socket:4: ListenStream= references a path below legacy directory /var/run/, updating /var/run/dbus/system_bus_socket → /run/dbus/system_bus_socket; please update the unit file accordingly.
737[ 12.330695] systemd[1]: /etc/systemd/system/rstudio-server.service:7: PIDFile= references a path below legacy directory /var/run/, updating /var/run/rstudio-server.pid → /run/rstudio-server.pid; please update the unit file accordingly.
738[ 12.346002] systemd[1]: Listening on udev Kernel Socket.
739[ 12.346050] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
740[ 12.346475] systemd[1]: Listening on Syslog Socket.
741[ 12.347021] systemd[1]: Created slice system-systemd\x2dcryptsetup.slice.
742[ 12.365466] EXT4-fs (dm-1): re-mounted. Opts: errors=remount-ro
743[ 12.377107] lp: driver loaded but no devices found
744[ 12.385754] ppdev: user-space parallel port driver
745[ 12.672333] systemd-journald[532]: Received request to flush runtime journal from PID 1
746[ 12.721163] idma64 idma64.0: Found Intel integrated DMA 64-bit
747[ 12.724174] idma64 idma64.1: Found Intel integrated DMA 64-bit
748[ 12.727407] idma64 idma64.2: Found Intel integrated DMA 64-bit
749[ 12.746400] mei_me 0000:00:16.0: enabling device (0000 -> 0002)
750[ 12.785161] RAPL PMU: API unit is 2^-32 Joules, 5 fixed counters, 655360 ms ovfl timer
751[ 12.785162] RAPL PMU: hw unit of domain pp0-core 2^-14 Joules
752[ 12.785163] RAPL PMU: hw unit of domain package 2^-14 Joules
753[ 12.785163] RAPL PMU: hw unit of domain dram 2^-14 Joules
754[ 12.785164] RAPL PMU: hw unit of domain pp1-gpu 2^-14 Joules
755[ 12.785164] RAPL PMU: hw unit of domain psys 2^-14 Joules
756[ 12.792285] cfg80211: Loading compiled-in X.509 certificates for regulatory database
757[ 12.799535] input: Ideapad extra buttons as /devices/pci0000:00/0000:00:1f.0/PNP0C09:00/VPC2004:00/input/input9
758[ 12.801987] intel_rapl_common: Found RAPL domain package
759[ 12.801989] intel_rapl_common: Found RAPL domain dram
760[ 12.802203] proc_thermal 0000:00:04.0: Creating sysfs group for PROC_THERMAL_PCI
761[ 12.835732] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
762[ 12.889005] input: MSFT0001:02 04F3:304B Touchpad as /devices/pci0000:00/0000:00:15.0/i2c_designware.0/i2c-1/i2c-MSFT0001:02/0018:04F3:304B.0001/input/input11
763[ 12.890282] hid-multitouch 0018:04F3:304B.0001: input,hidraw0: I2C HID v1.00 Mouse [MSFT0001:02 04F3:304B] on i2c-MSFT0001:02
764[ 12.934786] ath10k_pci 0000:02:00.0: pci irq msi oper_irq_mode 2 irq_mode 0 reset_mode 0
765[ 12.982810] mc: Linux media interface: v0.10
766[ 12.983103] intel_rapl_common: Found RAPL domain package
767[ 12.983104] intel_rapl_common: Found RAPL domain core
768[ 12.983105] intel_rapl_common: Found RAPL domain uncore
769[ 12.983106] intel_rapl_common: Found RAPL domain dram
770[ 12.990882] videodev: Linux video capture interface: v2.00
771[ 13.083420] uvcvideo: Found UVC 1.00 device Integrated Camera (13d3:56b2)
772[ 13.108258] EXT4-fs (nvme0n1p2): mounted filesystem with ordered data mode. Opts: (null)
773[ 13.124274] uvcvideo 1-6:1.0: Entity type for entity Extension 4 was not initialized!
774[ 13.124276] uvcvideo 1-6:1.0: Entity type for entity Extension 3 was not initialized!
775[ 13.124277] uvcvideo 1-6:1.0: Entity type for entity Processing 2 was not initialized!
776[ 13.124279] uvcvideo 1-6:1.0: Entity type for entity Camera 1 was not initialized!
777[ 13.124375] input: Integrated Camera: Integrated C as /devices/pci0000:00/0000:00:14.0/usb1/1-6/1-6:1.0/input/input12
778[ 13.128034] usbcore: registered new interface driver uvcvideo
779[ 13.128036] USB Video Class driver (1.1.1)
780[ 13.156528] audit: type=1400 audit(1584189425.647:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="libreoffice-xpdfimport" pid=803 comm="apparmor_parser"
781[ 13.157665] audit: type=1400 audit(1584189425.651:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/ippusbxd" pid=801 comm="apparmor_parser"
782[ 13.158620] audit: type=1400 audit(1584189425.651:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="libreoffice-senddoc" pid=807 comm="apparmor_parser"
783[ 13.161020] audit: type=1400 audit(1584189425.655:5): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/man" pid=802 comm="apparmor_parser"
784[ 13.161023] audit: type=1400 audit(1584189425.655:6): apparmor="STATUS" operation="profile_load" profile="unconfined" name="man_filter" pid=802 comm="apparmor_parser"
785[ 13.161025] audit: type=1400 audit(1584189425.655:7): apparmor="STATUS" operation="profile_load" profile="unconfined" name="man_groff" pid=802 comm="apparmor_parser"
786[ 13.162852] audit: type=1400 audit(1584189425.655:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="nvidia_modprobe" pid=810 comm="apparmor_parser"
787[ 13.162854] audit: type=1400 audit(1584189425.655:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="nvidia_modprobe//kmod" pid=810 comm="apparmor_parser"
788[ 13.164916] audit: type=1400 audit(1584189425.659:10): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/lightdm/lightdm-guest-session" pid=809 comm="apparmor_parser"
789[ 13.164918] audit: type=1400 audit(1584189425.659:11): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/lightdm/lightdm-guest-session//chromium" pid=809 comm="apparmor_parser"
790[ 13.212520] ath10k_pci 0000:02:00.0: qca9377 hw1.1 target 0x05020001 chip_id 0x003821ff sub 17aa:0901
791[ 13.212522] ath10k_pci 0000:02:00.0: kconfig debug 0 debugfs 1 tracing 1 dfs 0 testmode 0
792[ 13.212917] ath10k_pci 0000:02:00.0: firmware ver WLAN.TF.2.1-00021-QCARMSWP-1 api 6 features wowlan,ignore-otp crc32 42e41877
793[ 13.289670] ath10k_pci 0000:02:00.0: board_file api 2 bmi_id N/A crc32 8aedfa4a
794[ 13.292485] Adding 1003516k swap on /dev/mapper/vgxubuntu-swap_1. Priority:-2 extents:1 across:1003516k SSFS
795[ 13.314463] snd_soc_skl 0000:00:1f.3: DSP detected with PCI class/subclass/prog-if info 0x040380
796[ 13.314471] snd_soc_skl 0000:00:1f.3: enabling device (0000 -> 0002)
797[ 13.324916] snd_soc_skl 0000:00:1f.3: bound 0000:00:02.0 (ops i915_audio_component_bind_ops [i915])
798[ 13.360495] skl_hda_dsp_generic skl_hda_dsp_generic: Unsupported HDAudio/iDisp configuration found
799[ 13.360500] skl_hda_dsp_generic: probe of skl_hda_dsp_generic failed with error -22
800[ 13.364413] ath10k_pci 0000:02:00.0: unsupported HTC service id: 1536
801[ 13.382664] ath10k_pci 0000:02:00.0: htt-ver 3.56 wmi-op 4 htt-op 3 cal otp max-sta 32 raw 0 hwcrypto 1
802[ 13.464988] ath: EEPROM regdomain: 0x6c
803[ 13.464989] ath: EEPROM indicates we should expect a direct regpair map
804[ 13.464990] ath: Country alpha2 being used: 00
805[ 13.464990] ath: Regpair used: 0x6c
806[ 13.468394] ath10k_pci 0000:02:00.0 wlp2s0: renamed from wlan0
807[ 14.098715] vboxdrv: loading out-of-tree module taints kernel.
808[ 14.098879] vboxdrv: module verification failed: signature and/or required key missing - tainting kernel
809[ 14.107723] vboxdrv: Found 4 processor cores
810[ 14.131445] vboxdrv: TSC mode is Invariant, tentative frequency 2303981251 Hz
811[ 14.131446] vboxdrv: Successfully loaded version 6.1.4 (interface 0x002d0001)
812[ 14.334523] VBoxNetFlt: Successfully started.
813[ 14.336443] VBoxNetAdp: Successfully started.
814[ 14.424228] ath10k_pci 0000:02:00.0: unsupported HTC service id: 1536
815[ 19.390473] wlp2s0: authenticate with 90:02:18:5e:0d:12
816[ 19.421257] wlp2s0: send auth to 90:02:18:5e:0d:12 (try 1/3)
817[ 19.421898] wlp2s0: authenticated
818[ 19.424488] wlp2s0: associate with 90:02:18:5e:0d:12 (try 1/3)
819[ 19.426492] wlp2s0: RX AssocResp from 90:02:18:5e:0d:12 (capab=0x1011 status=0 aid=3)
820[ 19.429229] wlp2s0: associated
821[ 19.429309] ath: EEPROM regdomain: 0x8348
822[ 19.429309] ath: EEPROM indicates we should expect a country code
823[ 19.429310] ath: doing EEPROM country->regdmn map search
824[ 19.429310] ath: country maps to regdmn code: 0x3a
825[ 19.429311] ath: Country alpha2 being used: US
826[ 19.429311] ath: Regpair used: 0x3a
827[ 19.429312] ath: regdomain 0x8348 dynamically updated by country element
828[ 19.443357] IPv6: ADDRCONF(NETDEV_CHANGE): wlp2s0: link becomes ready
829[ 19.528144] wlp2s0: Limiting TX power to 17 (17 - 0) dBm as advertised by 90:02:18:5e:0d:12
830[ 88.118558] kauditd_printk_skb: 20 callbacks suppressed
831[ 88.118559] audit: type=1400 audit(1584189499.678:32): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/snapd/snap-confine" pid=2737 comm="apparmor_parser"
832[ 88.141394] audit: type=1400 audit(1584189499.702:33): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/snapd/snap-confine//mount-namespace-capture-helper" pid=2737 comm="apparmor_parser"
833[ 91.003424] audit: type=1400 audit(1584189502.562:34): apparmor="STATUS" operation="profile_replace" info="same as current profile, skipping" profile="unconfined" name="libreoffice-oopslash" pid=2994 comm="apparmor_parser"
834[ 91.018632] audit: type=1400 audit(1584189502.578:35): apparmor="STATUS" operation="profile_replace" info="same as current profile, skipping" profile="unconfined" name="libreoffice-senddoc" pid=2997 comm="apparmor_parser"
835[ 96.957392] audit: type=1400 audit(1584189508.514:36): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="libreoffice-soffice" pid=3000 comm="apparmor_parser"
836[ 96.966302] audit: type=1400 audit(1584189508.526:37): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="libreoffice-soffice//gpg" pid=3000 comm="apparmor_parser"
837[ 96.985092] audit: type=1400 audit(1584189508.542:38): apparmor="STATUS" operation="profile_replace" info="same as current profile, skipping" profile="unconfined" name="libreoffice-xpdfimport" pid=3015 comm="apparmor_parser"
838[ 124.357911] mce: CPU1: Core temperature above threshold, cpu clock throttled (total events = 1)
839[ 124.357911] mce: CPU3: Core temperature above threshold, cpu clock throttled (total events = 1)
840[ 124.357932] mce: CPU3: Package temperature above threshold, cpu clock throttled (total events = 1)
841[ 124.357934] mce: CPU1: Package temperature above threshold, cpu clock throttled (total events = 1)
842[ 124.357936] mce: CPU0: Package temperature above threshold, cpu clock throttled (total events = 1)
843[ 124.357937] mce: CPU2: Package temperature above threshold, cpu clock throttled (total events = 1)
844[ 124.366916] mce: CPU1: Core temperature/speed normal
845[ 124.366917] mce: CPU0: Package temperature/speed normal
846[ 124.366918] mce: CPU3: Core temperature/speed normal
847[ 124.366918] mce: CPU2: Package temperature/speed normal
848[ 124.366919] mce: CPU3: Package temperature/speed normal
849[ 124.366920] mce: CPU1: Package temperature/speed normal
850[ 329.756567] usb 1-2: USB disconnect, device number 2
851[ 337.833266] usb 1-2: new full-speed USB device number 5 using xhci_hcd
852[ 338.098461] usb 1-2: New USB device found, idVendor=10f5, idProduct=0242, bcdDevice= 1.00
853[ 338.098466] usb 1-2: New USB device strings: Mfr=3, Product=4, SerialNumber=0
854[ 338.098469] usb 1-2: Product: Turtle Beach PX3 (PC)
855[ 338.098472] usb 1-2: Manufacturer: Turtle Beach
856[ 338.205836] input: Turtle Beach Turtle Beach PX3 (PC) Consumer Control as /devices/pci0000:00/0000:00:14.0/usb1/1-2/1-2:1.3/0003:10F5:0242.0003/input/input13
857[ 338.265649] input: Turtle Beach Turtle Beach PX3 (PC) as /devices/pci0000:00/0000:00:14.0/usb1/1-2/1-2:1.3/0003:10F5:0242.0003/input/input14
858[ 338.266165] hid-generic 0003:10F5:0242.0003: input,hiddev0,hidraw1: USB HID v1.11 Device [Turtle Beach Turtle Beach PX3 (PC)] on usb-0000:00:14.0-2/input3
859[ 338.557386] usbcore: registered new interface driver snd-usb-audio
860[ 2526.702172] perf: interrupt took too long (2567 > 2500), lowering kernel.perf_event_max_sample_rate to 77750
861[ 5432.564125] perf: interrupt took too long (3223 > 3208), lowering kernel.perf_event_max_sample_rate to 62000
862[ 6777.537153] perf: interrupt took too long (4142 > 4028), lowering kernel.perf_event_max_sample_rate to 48250
863[ 7106.491917] usb 1-2: USB disconnect, device number 5
864[ 7112.533454] usb 1-2: new full-speed USB device number 6 using xhci_hcd
865[ 7112.687998] usb 1-2: config 1 has an invalid interface number: 1 but max is 0
866[ 7112.688003] usb 1-2: config 1 has no interface number 0
867[ 7112.701695] usb 1-2: New USB device found, idVendor=10f5, idProduct=0244, bcdDevice= 1.00
868[ 7112.701700] usb 1-2: New USB device strings: Mfr=2, Product=3, SerialNumber=0
869[ 7112.701704] usb 1-2: Product: Turtle Beach PX3 Battery Charger
870[ 7112.701707] usb 1-2: Manufacturer: Turtle Beach
871[ 7112.731939] input: Turtle Beach Turtle Beach PX3 Battery Charger Consumer Control as /devices/pci0000:00/0000:00:14.0/usb1/1-2/1-2:1.1/0003:10F5:0244.0004/input/input15
872[ 7112.793718] input: Turtle Beach Turtle Beach PX3 Battery Charger as /devices/pci0000:00/0000:00:14.0/usb1/1-2/1-2:1.1/0003:10F5:0244.0004/input/input16
873[ 7112.794107] hid-generic 0003:10F5:0244.0004: input,hiddev0,hidraw1: USB HID v1.11 Device [Turtle Beach Turtle Beach PX3 Battery Charger] on usb-0000:00:14.0-2/input1
874[ 8462.116703] usb 1-2: USB disconnect, device number 6
875[ 8470.218424] usb 1-2: new full-speed USB device number 7 using xhci_hcd
876[ 8470.513547] usb 1-2: New USB device found, idVendor=10f5, idProduct=0242, bcdDevice= 1.00
877[ 8470.513553] usb 1-2: New USB device strings: Mfr=3, Product=4, SerialNumber=0
878[ 8470.513556] usb 1-2: Product: Turtle Beach PX3 (PC)
879[ 8470.513559] usb 1-2: Manufacturer: Turtle Beach
880[ 8470.900297] input: Turtle Beach Turtle Beach PX3 (PC) Consumer Control as /devices/pci0000:00/0000:00:14.0/usb1/1-2/1-2:1.3/0003:10F5:0242.0005/input/input17
881[ 8470.958921] input: Turtle Beach Turtle Beach PX3 (PC) as /devices/pci0000:00/0000:00:14.0/usb1/1-2/1-2:1.3/0003:10F5:0242.0005/input/input18
882[ 8470.959433] hid-generic 0003:10F5:0242.0005: input,hiddev0,hidraw1: USB HID v1.11 Device [Turtle Beach Turtle Beach PX3 (PC)] on usb-0000:00:14.0-2/input3
883[ 9266.448961] perf: interrupt took too long (5187 > 5177), lowering kernel.perf_event_max_sample_rate to 38500
884[11441.306141] perf: interrupt took too long (6493 > 6483), lowering kernel.perf_event_max_sample_rate to 30750
885[13371.100955] usb 1-2: USB disconnect, device number 7
886[13371.107183] xhci_hcd 0000:00:14.0: ERROR Transfer event TRB DMA ptr not part of current TD ep_index 5 comp_code 1
887[13371.107194] xhci_hcd 0000:00:14.0: Looking for event-dma 0000000256910cd0 trb-start 0000000256910ce0 trb-end 0000000256910ce0 seg-start 0000000256910000 seg-end 0000000256910ff0
888[13371.108195] xhci_hcd 0000:00:14.0: ERROR Transfer event TRB DMA ptr not part of current TD ep_index 5 comp_code 1
889[13371.108206] xhci_hcd 0000:00:14.0: Looking for event-dma 0000000256910ce0 trb-start 0000000256910cf0 trb-end 0000000256910cf0 seg-start 0000000256910000 seg-end 0000000256910ff0
890[13371.109197] xhci_hcd 0000:00:14.0: ERROR Transfer event TRB DMA ptr not part of current TD ep_index 5 comp_code 1
891[13371.109207] xhci_hcd 0000:00:14.0: Looking for event-dma 0000000256910cf0 trb-start 0000000256910d00 trb-end 0000000256910d00 seg-start 0000000256910000 seg-end 0000000256910ff0
892[13371.110178] xhci_hcd 0000:00:14.0: ERROR Transfer event TRB DMA ptr not part of current TD ep_index 5 comp_code 1
893[13371.110192] xhci_hcd 0000:00:14.0: Looking for event-dma 0000000256910d00 trb-start 0000000256910d10 trb-end 0000000256910d10 seg-start 0000000256910000 seg-end 0000000256910ff0
894[13371.111195] xhci_hcd 0000:00:14.0: ERROR Transfer event TRB DMA ptr not part of current TD ep_index 5 comp_code 1
895[13371.111206] xhci_hcd 0000:00:14.0: Looking for event-dma 0000000256910d10 trb-start 0000000256910d20 trb-end 0000000256910d20 seg-start 0000000256910000 seg-end 0000000256910ff0
896[13371.112221] xhci_hcd 0000:00:14.0: ERROR Transfer event TRB DMA ptr not part of current TD ep_index 5 comp_code 1
897[13371.112231] xhci_hcd 0000:00:14.0: Looking for event-dma 0000000256910d20 trb-start 0000000256910d30 trb-end 0000000256910d30 seg-start 0000000256910000 seg-end 0000000256910ff0
898[13371.113235] xhci_hcd 0000:00:14.0: ERROR Transfer event TRB DMA ptr not part of current TD ep_index 5 comp_code 1
899[13371.113245] xhci_hcd 0000:00:14.0: Looking for event-dma 0000000256910d30 trb-start 0000000256910d40 trb-end 0000000256910d40 seg-start 0000000256910000 seg-end 0000000256910ff0
900[13371.114148] xhci_hcd 0000:00:14.0: ERROR Transfer event TRB DMA ptr not part of current TD ep_index 5 comp_code 1
901[13371.114161] xhci_hcd 0000:00:14.0: Looking for event-dma 0000000256910d40 trb-start 0000000256910d50 trb-end 0000000256910d50 seg-start 0000000256910000 seg-end 0000000256910ff0
902[13371.115146] xhci_hcd 0000:00:14.0: WARN Event TRB for slot 6 ep 5 with no TDs queued?
903[13371.115152] xhci_hcd 0000:00:14.0: WARN Event TRB for slot 6 ep 5 with no TDs queued?
904[13388.770276] usb 1-2: new full-speed USB device number 8 using xhci_hcd
905[13388.925047] usb 1-2: config 1 has an invalid interface number: 1 but max is 0
906[13388.925051] usb 1-2: config 1 has no interface number 0
907[13388.939120] usb 1-2: New USB device found, idVendor=10f5, idProduct=0244, bcdDevice= 1.00
908[13388.939125] usb 1-2: New USB device strings: Mfr=2, Product=3, SerialNumber=0
909[13388.939128] usb 1-2: Product: Turtle Beach PX3 Battery Charger
910[13388.939131] usb 1-2: Manufacturer: Turtle Beach
911[13388.970446] input: Turtle Beach Turtle Beach PX3 Battery Charger Consumer Control as /devices/pci0000:00/0000:00:14.0/usb1/1-2/1-2:1.1/0003:10F5:0244.0006/input/input19
912[13389.030598] input: Turtle Beach Turtle Beach PX3 Battery Charger as /devices/pci0000:00/0000:00:14.0/usb1/1-2/1-2:1.1/0003:10F5:0244.0006/input/input20
913[13389.030958] hid-generic 0003:10F5:0244.0006: input,hiddev0,hidraw1: USB HID v1.11 Device [Turtle Beach Turtle Beach PX3 Battery Charger] on usb-0000:00:14.0-2/input1
914[13390.822668] usb 1-2: USB disconnect, device number 8
915[13391.446304] usb 1-2: new full-speed USB device number 9 using xhci_hcd
916[13391.601493] usb 1-2: config 1 has an invalid interface number: 1 but max is 0
917[13391.601497] usb 1-2: config 1 has no interface number 0
918[13391.615742] usb 1-2: New USB device found, idVendor=10f5, idProduct=0244, bcdDevice= 1.00
919[13391.615747] usb 1-2: New USB device strings: Mfr=2, Product=3, SerialNumber=0
920[13391.615750] usb 1-2: Product: Turtle Beach PX3 Battery Charger
921[13391.615753] usb 1-2: Manufacturer: Turtle Beach
922[13391.647997] input: Turtle Beach Turtle Beach PX3 Battery Charger Consumer Control as /devices/pci0000:00/0000:00:14.0/usb1/1-2/1-2:1.1/0003:10F5:0244.0007/input/input21
923[13391.706572] input: Turtle Beach Turtle Beach PX3 Battery Charger as /devices/pci0000:00/0000:00:14.0/usb1/1-2/1-2:1.1/0003:10F5:0244.0007/input/input22
924[13391.708532] hid-generic 0003:10F5:0244.0007: input,hiddev0,hidraw1: USB HID v1.11 Device [Turtle Beach Turtle Beach PX3 Battery Charger] on usb-0000:00:14.0-2/input1
925[13393.965830] usb 1-2: USB disconnect, device number 9
926[13394.314342] usb 1-2: new full-speed USB device number 10 using xhci_hcd
927[13394.499727] usb 1-2: New USB device found, idVendor=10f5, idProduct=0243, bcdDevice= 1.00
928[13394.499733] usb 1-2: New USB device strings: Mfr=3, Product=4, SerialNumber=0
929[13394.499736] usb 1-2: Product: Turtle Beach PX3 Headset
930[13394.499739] usb 1-2: Manufacturer: Turtle Beach
931[13394.572156] input: Turtle Beach Turtle Beach PX3 Headset Consumer Control as /devices/pci0000:00/0000:00:14.0/usb1/1-2/1-2:1.3/0003:10F5:0243.0008/input/input23
932[13394.634600] input: Turtle Beach Turtle Beach PX3 Headset as /devices/pci0000:00/0000:00:14.0/usb1/1-2/1-2:1.3/0003:10F5:0243.0008/input/input24
933[13394.635018] hid-generic 0003:10F5:0243.0008: input,hiddev0,hidraw1: USB HID v1.11 Device [Turtle Beach Turtle Beach PX3 Headset] on usb-0000:00:14.0-2/input3
934[13580.979710] SUPR0GipMap: fGetGipCpu=0x1b
935[13581.727673] vboxdrv: 0000000000000000 VMMR0.r0
936[13581.844417] vboxdrv: 0000000000000000 VBoxDDR0.r0
937[13581.923032] vboxdrv: 0000000000000000 VBoxEhciR0.r0
938[13581.923864] VMMR0InitVM: eflags=246 fKernelFeatures=0x0 (SUPKERNELFEATURES_SMAP=0)
939[13635.025983] usb 1-2: USB disconnect, device number 10
940[13635.032325] xhci_hcd 0000:00:14.0: ERROR Transfer event TRB DMA ptr not part of current TD ep_index 5 comp_code 1
941[13635.032330] xhci_hcd 0000:00:14.0: Looking for event-dma 000000025690fbb0 trb-start 000000025690fbc0 trb-end 000000025690fbc0 seg-start 000000025690f000 seg-end 000000025690fff0
942[13635.033322] xhci_hcd 0000:00:14.0: ERROR Transfer event TRB DMA ptr not part of current TD ep_index 5 comp_code 1
943[13635.033326] xhci_hcd 0000:00:14.0: Looking for event-dma 000000025690fbc0 trb-start 000000025690fbd0 trb-end 000000025690fbd0 seg-start 000000025690f000 seg-end 000000025690fff0
944[13635.034321] xhci_hcd 0000:00:14.0: ERROR Transfer event TRB DMA ptr not part of current TD ep_index 5 comp_code 1
945[13635.034324] xhci_hcd 0000:00:14.0: Looking for event-dma 000000025690fbd0 trb-start 000000025690fbe0 trb-end 000000025690fbe0 seg-start 000000025690f000 seg-end 000000025690fff0
946[13635.035342] xhci_hcd 0000:00:14.0: ERROR Transfer event TRB DMA ptr not part of current TD ep_index 5 comp_code 1
947[13635.035351] xhci_hcd 0000:00:14.0: Looking for event-dma 000000025690fbe0 trb-start 000000025690fbf0 trb-end 000000025690fbf0 seg-start 000000025690f000 seg-end 000000025690fff0
948[13635.036323] xhci_hcd 0000:00:14.0: ERROR Transfer event TRB DMA ptr not part of current TD ep_index 5 comp_code 1
949[13635.036328] xhci_hcd 0000:00:14.0: Looking for event-dma 000000025690fbf0 trb-start 000000025690fc00 trb-end 000000025690fc00 seg-start 000000025690f000 seg-end 000000025690fff0
950[13635.037347] xhci_hcd 0000:00:14.0: ERROR Transfer event TRB DMA ptr not part of current TD ep_index 5 comp_code 1
951[13635.037361] xhci_hcd 0000:00:14.0: Looking for event-dma 000000025690fc00 trb-start 000000025690fc10 trb-end 000000025690fc10 seg-start 000000025690f000 seg-end 000000025690fff0
952[13635.038321] xhci_hcd 0000:00:14.0: ERROR Transfer event TRB DMA ptr not part of current TD ep_index 5 comp_code 1
953[13635.038326] xhci_hcd 0000:00:14.0: Looking for event-dma 000000025690fc10 trb-start 000000025690fc20 trb-end 000000025690fc20 seg-start 000000025690f000 seg-end 000000025690fff0
954[13635.039319] xhci_hcd 0000:00:14.0: ERROR Transfer event TRB DMA ptr not part of current TD ep_index 5 comp_code 1
955[13635.039323] xhci_hcd 0000:00:14.0: Looking for event-dma 000000025690fc20 trb-start 000000025690fc30 trb-end 000000025690fc30 seg-start 000000025690f000 seg-end 000000025690fff0
956[13635.040324] xhci_hcd 0000:00:14.0: ERROR Transfer event TRB DMA ptr not part of current TD ep_index 5 comp_code 1
957[13635.040329] xhci_hcd 0000:00:14.0: Looking for event-dma 000000025690fc30 trb-start 000000025690fc40 trb-end 000000025690fc40 seg-start 000000025690f000 seg-end 000000025690fff0
958[13635.041326] xhci_hcd 0000:00:14.0: ERROR Transfer event TRB DMA ptr not part of current TD ep_index 5 comp_code 1
959[13635.041330] xhci_hcd 0000:00:14.0: Looking for event-dma 000000025690fc40 trb-start 000000025690fc50 trb-end 000000025690fc50 seg-start 000000025690f000 seg-end 000000025690fff0
960[13635.042337] xhci_hcd 0000:00:14.0: WARN Event TRB for slot 9 ep 5 with no TDs queued?
961[13635.042341] xhci_hcd 0000:00:14.0: WARN Event TRB for slot 9 ep 5 with no TDs queued?
962[13636.062536] usb 1-2: new full-speed USB device number 11 using xhci_hcd
963[13636.220918] usb 1-2: config 1 has an invalid interface number: 1 but max is 0
964[13636.220919] usb 1-2: config 1 has no interface number 0
965[13636.234314] usb 1-2: New USB device found, idVendor=10f5, idProduct=0244, bcdDevice= 1.00
966[13636.234316] usb 1-2: New USB device strings: Mfr=2, Product=3, SerialNumber=0
967[13636.234318] usb 1-2: Product: Turtle Beach PX3 Battery Charger
968[13636.234318] usb 1-2: Manufacturer: Turtle Beach
969[13636.263219] input: Turtle Beach Turtle Beach PX3 Battery Charger Consumer Control as /devices/pci0000:00/0000:00:14.0/usb1/1-2/1-2:1.1/0003:10F5:0244.0009/input/input25
970[13636.322651] input: Turtle Beach Turtle Beach PX3 Battery Charger as /devices/pci0000:00/0000:00:14.0/usb1/1-2/1-2:1.1/0003:10F5:0244.0009/input/input26
971[13636.322788] hid-generic 0003:10F5:0244.0009: input,hiddev0,hidraw1: USB HID v1.11 Device [Turtle Beach Turtle Beach PX3 Battery Charger] on usb-0000:00:14.0-2/input1
972[13643.330859] usb 1-2: USB disconnect, device number 11
973[13643.954553] usb 1-2: new full-speed USB device number 12 using xhci_hcd
974[13644.109347] usb 1-2: config 1 has an invalid interface number: 1 but max is 0
975[13644.109349] usb 1-2: config 1 has no interface number 0
976[13644.123599] usb 1-2: New USB device found, idVendor=10f5, idProduct=0244, bcdDevice= 1.00
977[13644.123602] usb 1-2: New USB device strings: Mfr=2, Product=3, SerialNumber=0
978[13644.123603] usb 1-2: Product: Turtle Beach PX3 Battery Charger
979[13644.123604] usb 1-2: Manufacturer: Turtle Beach
980[13644.154921] input: Turtle Beach Turtle Beach PX3 Battery Charger Consumer Control as /devices/pci0000:00/0000:00:14.0/usb1/1-2/1-2:1.1/0003:10F5:0244.000A/input/input27
981[13644.214670] input: Turtle Beach Turtle Beach PX3 Battery Charger as /devices/pci0000:00/0000:00:14.0/usb1/1-2/1-2:1.1/0003:10F5:0244.000A/input/input28
982[13644.214861] hid-generic 0003:10F5:0244.000A: input,hiddev0,hidraw1: USB HID v1.11 Device [Turtle Beach Turtle Beach PX3 Battery Charger] on usb-0000:00:14.0-2/input1
983[13646.324490] usb 1-2: USB disconnect, device number 12
984[13646.659753] usb 1-2: new full-speed USB device number 13 using xhci_hcd
985[13646.842802] usb 1-2: New USB device found, idVendor=10f5, idProduct=0243, bcdDevice= 1.00
986[13646.842804] usb 1-2: New USB device strings: Mfr=3, Product=4, SerialNumber=0
987[13646.842805] usb 1-2: Product: Turtle Beach PX3 Headset
988[13646.842806] usb 1-2: Manufacturer: Turtle Beach
989[13646.907614] input: Turtle Beach Turtle Beach PX3 Headset Consumer Control as /devices/pci0000:00/0000:00:14.0/usb1/1-2/1-2:1.3/0003:10F5:0243.000B/input/input29
990[13646.970650] input: Turtle Beach Turtle Beach PX3 Headset as /devices/pci0000:00/0000:00:14.0/usb1/1-2/1-2:1.3/0003:10F5:0243.000B/input/input30
991[13646.970764] hid-generic 0003:10F5:0243.000B: input,hiddev0,hidraw1: USB HID v1.11 Device [Turtle Beach Turtle Beach PX3 Headset] on usb-0000:00:14.0-2/input3
992[16376.188502] usb 1-2: USB disconnect, device number 13
993[16376.194913] xhci_hcd 0000:00:14.0: ERROR Transfer event TRB DMA ptr not part of current TD ep_index 5 comp_code 1
994[16376.194916] xhci_hcd 0000:00:14.0: Looking for event-dma 000000025690ff80 trb-start 000000025690ff90 trb-end 000000025690ff90 seg-start 000000025690f000 seg-end 000000025690fff0
995[16376.195914] xhci_hcd 0000:00:14.0: ERROR Transfer event TRB DMA ptr not part of current TD ep_index 5 comp_code 1
996[16376.195918] xhci_hcd 0000:00:14.0: Looking for event-dma 000000025690ff90 trb-start 000000025690ffa0 trb-end 000000025690ffa0 seg-start 000000025690f000 seg-end 000000025690fff0
997[16376.196914] xhci_hcd 0000:00:14.0: ERROR Transfer event TRB DMA ptr not part of current TD ep_index 5 comp_code 1
998[16376.196917] xhci_hcd 0000:00:14.0: Looking for event-dma 000000025690ffa0 trb-start 000000025690ffb0 trb-end 000000025690ffb0 seg-start 000000025690f000 seg-end 000000025690fff0
999[16376.197913] xhci_hcd 0000:00:14.0: ERROR Transfer event TRB DMA ptr not part of current TD ep_index 5 comp_code 1
1000[16376.197915] xhci_hcd 0000:00:14.0: Looking for event-dma 000000025690ffb0 trb-start 000000025690ffc0 trb-end 000000025690ffc0 seg-start 000000025690f000 seg-end 000000025690fff0
1001[16376.198915] xhci_hcd 0000:00:14.0: ERROR Transfer event TRB DMA ptr not part of current TD ep_index 5 comp_code 1
1002[16376.198919] xhci_hcd 0000:00:14.0: Looking for event-dma 000000025690ffc0 trb-start 000000025690ffd0 trb-end 000000025690ffd0 seg-start 000000025690f000 seg-end 000000025690fff0
1003[16376.199913] xhci_hcd 0000:00:14.0: ERROR Transfer event TRB DMA ptr not part of current TD ep_index 5 comp_code 1
1004[16376.199915] xhci_hcd 0000:00:14.0: Looking for event-dma 000000025690ffd0 trb-start 000000025690ffe0 trb-end 000000025690ffe0 seg-start 000000025690f000 seg-end 000000025690fff0
1005[16376.200939] xhci_hcd 0000:00:14.0: ERROR Transfer event TRB DMA ptr not part of current TD ep_index 5 comp_code 1
1006[16376.200941] xhci_hcd 0000:00:14.0: Looking for event-dma 000000025690ffe0 trb-start 0000000256910000 trb-end 0000000256910000 seg-start 0000000256910000 seg-end 0000000256910ff0
1007[16376.200941] xhci_hcd 0000:00:14.0: ERROR Transfer event TRB DMA ptr not part of current TD ep_index 5 comp_code 1
1008[16376.200942] xhci_hcd 0000:00:14.0: Looking for event-dma 000000025690fff0 trb-start 0000000256910000 trb-end 0000000256910000 seg-start 0000000256910000 seg-end 0000000256910ff0
1009[16376.201943] xhci_hcd 0000:00:14.0: WARN Event TRB for slot 12 ep 5 with no TDs queued?
1010[16377.222586] usb 1-2: new full-speed USB device number 14 using xhci_hcd
1011[16377.376557] usb 1-2: config 1 has an invalid interface number: 1 but max is 0
1012[16377.376562] usb 1-2: config 1 has no interface number 0
1013[16377.389719] usb 1-2: New USB device found, idVendor=10f5, idProduct=0244, bcdDevice= 1.00
1014[16377.389729] usb 1-2: New USB device strings: Mfr=2, Product=3, SerialNumber=0
1015[16377.389735] usb 1-2: Product: Turtle Beach PX3 Battery Charger
1016[16377.389740] usb 1-2: Manufacturer: Turtle Beach
1017[16377.423568] input: Turtle Beach Turtle Beach PX3 Battery Charger Consumer Control as /devices/pci0000:00/0000:00:14.0/usb1/1-2/1-2:1.1/0003:10F5:0244.000C/input/input31
1018[16377.482506] input: Turtle Beach Turtle Beach PX3 Battery Charger as /devices/pci0000:00/0000:00:14.0/usb1/1-2/1-2:1.1/0003:10F5:0244.000C/input/input32
1019[16377.482883] hid-generic 0003:10F5:0244.000C: input,hiddev0,hidraw1: USB HID v1.11 Device [Turtle Beach Turtle Beach PX3 Battery Charger] on usb-0000:00:14.0-2/input1
1020[24831.907182] usb 1-2: USB disconnect, device number 14
1021[24832.525545] usb 1-2: new full-speed USB device number 15 using xhci_hcd
1022[24832.681532] usb 1-2: config 1 has an invalid interface number: 1 but max is 0
1023[24832.681559] usb 1-2: config 1 has no interface number 0
1024[24832.696665] usb 1-2: New USB device found, idVendor=10f5, idProduct=0244, bcdDevice= 1.00
1025[24832.696671] usb 1-2: New USB device strings: Mfr=2, Product=3, SerialNumber=0
1026[24832.696674] usb 1-2: Product: Turtle Beach PX3 Battery Charger
1027[24832.696677] usb 1-2: Manufacturer: Turtle Beach
1028[24832.731615] input: Turtle Beach Turtle Beach PX3 Battery Charger Consumer Control as /devices/pci0000:00/0000:00:14.0/usb1/1-2/1-2:1.1/0003:10F5:0244.000D/input/input33
1029[24832.790312] input: Turtle Beach Turtle Beach PX3 Battery Charger as /devices/pci0000:00/0000:00:14.0/usb1/1-2/1-2:1.1/0003:10F5:0244.000D/input/input34
1030[24832.790853] hid-generic 0003:10F5:0244.000D: input,hiddev0,hidraw1: USB HID v1.11 Device [Turtle Beach Turtle Beach PX3 Battery Charger] on usb-0000:00:14.0-2/input1
1031[24834.770748] usb 1-2: USB disconnect, device number 15
1032[24835.122014] usb 1-2: new full-speed USB device number 16 using xhci_hcd
1033[24835.307784] usb 1-2: New USB device found, idVendor=10f5, idProduct=0243, bcdDevice= 1.00
1034[24835.307789] usb 1-2: New USB device strings: Mfr=3, Product=4, SerialNumber=0
1035[24835.307793] usb 1-2: Product: Turtle Beach PX3 Headset
1036[24835.307795] usb 1-2: Manufacturer: Turtle Beach
1037[24835.381394] input: Turtle Beach Turtle Beach PX3 Headset Consumer Control as /devices/pci0000:00/0000:00:14.0/usb1/1-2/1-2:1.3/0003:10F5:0243.000E/input/input35
1038[24835.438420] input: Turtle Beach Turtle Beach PX3 Headset as /devices/pci0000:00/0000:00:14.0/usb1/1-2/1-2:1.3/0003:10F5:0243.000E/input/input36
1039[24835.439082] hid-generic 0003:10F5:0243.000E: input,hiddev0,hidraw1: USB HID v1.11 Device [Turtle Beach Turtle Beach PX3 Headset] on usb-0000:00:14.0-2/input3
1040[27426.310520] usb 1-2: USB disconnect, device number 16
1041[27427.337924] usb 1-2: new full-speed USB device number 17 using xhci_hcd
1042[27427.492300] usb 1-2: config 1 has an invalid interface number: 1 but max is 0
1043[27427.492305] usb 1-2: config 1 has no interface number 0
1044[27427.505491] usb 1-2: New USB device found, idVendor=10f5, idProduct=0244, bcdDevice= 1.00
1045[27427.505497] usb 1-2: New USB device strings: Mfr=2, Product=3, SerialNumber=0
1046[27427.505500] usb 1-2: Product: Turtle Beach PX3 Battery Charger
1047[27427.505503] usb 1-2: Manufacturer: Turtle Beach
1048[27427.535486] input: Turtle Beach Turtle Beach PX3 Battery Charger Consumer Control as /devices/pci0000:00/0000:00:14.0/usb1/1-2/1-2:1.1/0003:10F5:0244.000F/input/input37
1049[27427.594233] input: Turtle Beach Turtle Beach PX3 Battery Charger as /devices/pci0000:00/0000:00:14.0/usb1/1-2/1-2:1.1/0003:10F5:0244.000F/input/input38
1050[27427.595017] hid-generic 0003:10F5:0244.000F: input,hiddev0,hidraw1: USB HID v1.11 Device [Turtle Beach Turtle Beach PX3 Battery Charger] on usb-0000:00:14.0-2/input1
1051[29960.119956] vboxdrv: 0000000000000000 VMMR0.r0
1052[29960.246176] vboxdrv: 0000000000000000 VBoxDDR0.r0
1053[29960.342564] vboxdrv: 0000000000000000 VBoxEhciR0.r0
1054[29960.343223] VMMR0InitVM: eflags=246 fKernelFeatures=0x0 (SUPKERNELFEATURES_SMAP=0)
1055[30022.203900] usb 1-2: USB disconnect, device number 17
1056[30022.821313] usb 1-2: new full-speed USB device number 18 using xhci_hcd
1057[30022.976345] usb 1-2: config 1 has an invalid interface number: 1 but max is 0
1058[30022.976347] usb 1-2: config 1 has no interface number 0
1059[30022.990573] usb 1-2: New USB device found, idVendor=10f5, idProduct=0244, bcdDevice= 1.00
1060[30022.990576] usb 1-2: New USB device strings: Mfr=2, Product=3, SerialNumber=0
1061[30022.990578] usb 1-2: Product: Turtle Beach PX3 Battery Charger
1062[30022.990580] usb 1-2: Manufacturer: Turtle Beach
1063[30023.021754] input: Turtle Beach Turtle Beach PX3 Battery Charger Consumer Control as /devices/pci0000:00/0000:00:14.0/usb1/1-2/1-2:1.1/0003:10F5:0244.0010/input/input39
1064[30023.085447] input: Turtle Beach Turtle Beach PX3 Battery Charger as /devices/pci0000:00/0000:00:14.0/usb1/1-2/1-2:1.1/0003:10F5:0244.0010/input/input40
1065[30023.085571] hid-generic 0003:10F5:0244.0010: input,hiddev0,hidraw1: USB HID v1.11 Device [Turtle Beach Turtle Beach PX3 Battery Charger] on usb-0000:00:14.0-2/input1
1066[30025.299956] usb 1-2: USB disconnect, device number 18
1067[30025.641349] usb 1-2: new full-speed USB device number 19 using xhci_hcd
1068[30025.834557] usb 1-2: New USB device found, idVendor=10f5, idProduct=0243, bcdDevice= 1.00
1069[30025.834560] usb 1-2: New USB device strings: Mfr=3, Product=4, SerialNumber=0
1070[30025.834561] usb 1-2: Product: Turtle Beach PX3 Headset
1071[30025.834562] usb 1-2: Manufacturer: Turtle Beach
1072[30025.910578] input: Turtle Beach Turtle Beach PX3 Headset Consumer Control as /devices/pci0000:00/0000:00:14.0/usb1/1-2/1-2:1.3/0003:10F5:0243.0011/input/input41
1073[30025.973710] input: Turtle Beach Turtle Beach PX3 Headset as /devices/pci0000:00/0000:00:14.0/usb1/1-2/1-2:1.3/0003:10F5:0243.0011/input/input42
1074[30025.973965] hid-generic 0003:10F5:0243.0011: input,hiddev0,hidraw1: USB HID v1.11 Device [Turtle Beach Turtle Beach PX3 Headset] on usb-0000:00:14.0-2/input3
1075[34315.772479] steamwebhelper[21584]: segfault at 0 ip 00007f5176272d17 sp 00007ffc3fd67650 error 4 in libcef.so[7f51723a6000+66da000]
1076[34315.772495] Code: 48 8d 9d a0 fe ff ff 48 89 de e8 f4 7e 65 fe 48 89 df e8 4c d4 69 fc 48 8d bd 20 fe ff ff e8 40 d4 69 fc 4c 89 a5 18 fe ff ff <49> 8b 1c 24 0f 57 c0 0f 29 85 a0 fe ff ff 48 c7 85 b0 fe ff ff 00
1077[34887.798197] usb 1-2: USB disconnect, device number 19
1078[34888.835367] usb 1-2: new full-speed USB device number 20 using xhci_hcd
1079[34888.997670] usb 1-2: config 1 has an invalid interface number: 1 but max is 0
1080[34888.997677] usb 1-2: config 1 has no interface number 0
1081[34889.010907] usb 1-2: New USB device found, idVendor=10f5, idProduct=0244, bcdDevice= 1.00
1082[34889.010912] usb 1-2: New USB device strings: Mfr=2, Product=3, SerialNumber=0
1083[34889.010916] usb 1-2: Product: Turtle Beach PX3 Battery Charger
1084[34889.010919] usb 1-2: Manufacturer: Turtle Beach
1085[34889.043209] input: Turtle Beach Turtle Beach PX3 Battery Charger Consumer Control as /devices/pci0000:00/0000:00:14.0/usb1/1-2/1-2:1.1/0003:10F5:0244.0012/input/input43
1086[34889.099814] input: Turtle Beach Turtle Beach PX3 Battery Charger as /devices/pci0000:00/0000:00:14.0/usb1/1-2/1-2:1.1/0003:10F5:0244.0012/input/input44
1087[34889.100386] hid-generic 0003:10F5:0244.0012: input,hiddev0,hidraw1: USB HID v1.11 Device [Turtle Beach Turtle Beach PX3 Battery Charger] on usb-0000:00:14.0-2/input1
1088[37471.512643] wlp2s0: disconnect from AP 90:02:18:5e:0d:12 for new auth to 24:a7:dc:6c:a4:e5
1089[37471.521919] wlp2s0: authenticate with 24:a7:dc:6c:a4:e5
1090[37471.549729] wlp2s0: send auth to 24:a7:dc:6c:a4:e5 (try 1/3)
1091[37471.550726] wlp2s0: authenticated
1092[37471.559540] wlp2s0: associate with 24:a7:dc:6c:a4:e5 (try 1/3)
1093[37471.561083] wlp2s0: RX ReassocResp from 24:a7:dc:6c:a4:e5 (capab=0x1011 status=0 aid=5)
1094[37471.563878] wlp2s0: associated
1095[37471.564174] ath: EEPROM regdomain: 0x833a
1096[37471.564176] ath: EEPROM indicates we should expect a country code
1097[37471.564178] ath: doing EEPROM country->regdmn map search
1098[37471.564180] ath: country maps to regdmn code: 0x37
1099[37471.564183] ath: Country alpha2 being used: GB
1100[37471.564184] ath: Regpair used: 0x37
1101[37471.564187] ath: regdomain 0x833a dynamically updated by country element
1102[37471.572312] wlp2s0: Limiting TX power to 23 (23 - 0) dBm as advertised by 24:a7:dc:6c:a4:e5