kZ7Z72nC

1doha:/ # dmesg
2dmesg
3[    0.000000] Booting Linux on physical CPU 0x0
4[    0.000000] Linux version 4.14.98-perf+ (hudsoncm@ilclbld159) (clang version 6.0.9 for Android NDK) #1 SMP PREEMPT Wed Nov 6 08:09:18 CST 2019
5[    0.000000] Boot CPU: AArch64 Processor [51af8014]
6[    0.000000] Machine: Qualcomm Technologies, Inc. trinket pm6125 + pmi632 doha
7[    0.000000] efi: Getting EFI parameters from FDT:
8[    0.000000] efi: UEFI not found.
9[    0.000000] OF: reserved mem: OVERLAP DETECTED!
10[    0.000000] disp_rdump_region@5c000000 (0x000000005c000000--0x000000005d000000) overlaps with cont_splash_region@5c000000 (0x000000005c000000--0x000000005cf00000)
11[    0.000000] Reserved memory: created CMA memory pool at 0x00000000fec00000, size 16 MiB
12[    0.000000] OF: reserved mem: initialized node qseecom_ta_region, compatible id shared-dma-pool
13[    0.000000] Reserved memory: created CMA memory pool at 0x00000000fcc00000, size 32 MiB
14[    0.000000] OF: reserved mem: initialized node linux,cma, compatible id shared-dma-pool
15[    0.000000] Reserved memory: created CMA memory pool at 0x00000000f4000000, size 140 MiB
16[    0.000000] OF: reserved mem: initialized node secure_display_region, compatible id shared-dma-pool
17[    0.000000] Reserved memory: created CMA memory pool at 0x000000013fc00000, size 4 MiB
18[    0.000000] OF: reserved mem: initialized node mem_dump_region, compatible id shared-dma-pool
19[    0.000000] Reserved memory: created CMA memory pool at 0x00000000f3c00000, size 4 MiB
20[    0.000000] OF: reserved mem: initialized node sdsp_region, compatible id shared-dma-pool
21[    0.000000] Reserved memory: created CMA memory pool at 0x00000000f3400000, size 8 MiB
22[    0.000000] OF: reserved mem: initialized node adsp_region, compatible id shared-dma-pool
23[    0.000000] Removed memory: created DMA memory pool at 0x0000000045700000, size 6 MiB
24[    0.000000] OF: reserved mem: initialized node hyp_region@45700000, compatible id removed-dma-pool
25[    0.000000] Removed memory: created DMA memory pool at 0x0000000045e00000, size 1 MiB
26[    0.000000] OF: reserved mem: initialized node xbl_aop_mem@45e00000, compatible id removed-dma-pool
27[    0.000000] Removed memory: created DMA memory pool at 0x0000000045fff000, size 0 MiB
28[    0.000000] OF: reserved mem: initialized node sec_apps_region@45fff000, compatible id removed-dma-pool
29[    0.000000] Removed memory: created DMA memory pool at 0x0000000046000000, size 2 MiB
30[    0.000000] OF: reserved mem: initialized node smem@46000000, compatible id removed-dma-pool
31[    0.000000] Removed memory: created DMA memory pool at 0x0000000046200000, size 45 MiB
32[    0.000000] OF: reserved mem: initialized node removed_region@46200000, compatible id removed-dma-pool
33[    0.000000] Removed memory: created DMA memory pool at 0x000000004ab00000, size 5 MiB
34[    0.000000] OF: reserved mem: initialized node camera_region@4ab00000, compatible id removed-dma-pool
35[    0.000000] Removed memory: created DMA memory pool at 0x000000004b000000, size 126 MiB
36[    0.000000] OF: reserved mem: initialized node modem_region@4b000000, compatible id removed-dma-pool
37[    0.000000] Removed memory: created DMA memory pool at 0x0000000052e00000, size 5 MiB
38[    0.000000] OF: reserved mem: initialized node pil_video_region@52e00000, compatible id removed-dma-pool
39[    0.000000] Removed memory: created DMA memory pool at 0x0000000053300000, size 2 MiB
40[    0.000000] OF: reserved mem: initialized node wlan_msa_region@53300000, compatible id removed-dma-pool
41[    0.000000] Removed memory: created DMA memory pool at 0x0000000053500000, size 30 MiB
42[    0.000000] OF: reserved mem: initialized node cdsp_regions@53500000, compatible id removed-dma-pool
43[    0.000000] Removed memory: created DMA memory pool at 0x0000000055300000, size 30 MiB
44[    0.000000] OF: reserved mem: initialized node pil_adsp_region@55300000, compatible id removed-dma-pool
45[    0.000000] Removed memory: created DMA memory pool at 0x0000000057100000, size 0 MiB
46[    0.000000] OF: reserved mem: initialized node ips_fw_region@57100000, compatible id removed-dma-pool
47[    0.000000] Removed memory: created DMA memory pool at 0x0000000057110000, size 0 MiB
48[    0.000000] OF: reserved mem: initialized node ipa_gsi_region@57110000, compatible id removed-dma-pool
49[    0.000000] Removed memory: created DMA memory pool at 0x0000000057115000, size 0 MiB
50[    0.000000] OF: reserved mem: initialized node gpu_region@57115000, compatible id removed-dma-pool
51[    0.000000] Reserved memory: created DMA memory pool at 0x000000005e400000, size 20 MiB
52[    0.000000] OF: reserved mem: initialized node qseecom_region@5e400000, compatible id shared-dma-pool
53[    0.000000] Removed memory: created DMA memory pool at 0x000000005f800000, size 30 MiB
54[    0.000000] OF: reserved mem: initialized node cdsp_sec_regions@5f800000, compatible id removed-dma-pool
55[    0.000000] On node 0 totalpages: 961929
56[    0.000000]   DMA zone: 10935 pages used for memmap
57[    0.000000]   DMA zone: 0 pages reserved
58[    0.000000]   DMA zone: 699785 pages, LIFO batch:31
59[    0.000000]   Normal zone: 4096 pages used for memmap
60[    0.000000]   Normal zone: 262144 pages, LIFO batch:31
61[    0.000000] psci: probing for conduit method from DT.
62[    0.000000] psci: PSCIv1.0 detected in firmware.
63[    0.000000] psci: Using standard PSCI v0.2 function IDs
64[    0.000000] psci: MIGRATE_INFO_TYPE not supported.
65[    0.000000] psci: SMC Calling Convention v1.1
66[    0.000000] random: fast init done
67[    0.000000] random: get_random_bytes called from start_kernel+0x90/0x498 with crng_init=1
68[    0.000000] percpu: Embedded 23 pages/cpu @ffffffe27f8c1000 s55064 r8192 d30952 u94208
69[    0.000000] pcpu-alloc: s55064 r8192 d30952 u94208 alloc=23*4096
70[    0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 [0] 4 [0] 5 [0] 6 [0] 7
71[    0.000000] CPU features: enabling workaround for Kryo2xx Silver erratum 845719
72[    0.000000] Built 1 zonelists, mobility grouping on.  Total pages: 946898
73[    0.000000] Kernel command line: rcupdate.rcu_expedited=1 rcu_nocbs=0-7 console=null androidboot.hardware=qcom androidboot.memcg=1 lpm_levels.sleep_disabled=1 video=vfb:640x400,bpp=32,memsize=3072000 msm_rtb.filter=0x237 service_locator.enable=1 swiotlb=1 firmware_class.path=/vendor/firmware_mnt/image loop.max_part=7 cgroup.memory=nokmem,nosocket androidboot.usbcontroller=4e00000.dwc3 printk.devkmsg=on androidboot.hab.csv=1 androidboot.hab.product=doha androidboot.hab.cid=50 androidboot.selinux=permissive skip_override androidboot.fastboot=1 buildvariant=eng quiet androidboot.verifiedbootstate=orange androidboot.keymaster=1 dm="1 vroot none ro 1,0 6224272 verity 1 PARTUUID=14177759-5a02-3091-6d70-9d3bb205a2ac PARTUUID=14177759-5a02-3091-6d70-9d3bb205a2ac 4096 4096 778034 778034 sha1 ce35c8db6cf55082e6a0f7876a6cb9e03f07dba6 e03ce53f143fcad93d11357ea2267e60f25a6fff77fe3e3121b8c00e3b67d82d 10 restart_on_corruption ignore_zero_blocks use_fec_from_device PARTUUID=14177759-5a02-3091-6d70-9d3bb205a2ac fec_roots 2 fec_blocks 784162 fec_start 784162" root=/dev/dm-0 androidboot.vbmeta.device=PARTUUID=7e8e608f-836b-7e86-a381-cc68f4dee212 androidboot.vbmeta.avb_version=1.0 androidboot.vbmeta.device_state=unlocked androidboot.vbmeta.hash_alg=sha256 androidboot.vbmeta.size=4608 androidboot.vbmeta.digest=a80b5f59a5265ad1bc2c86a520d84a9c869899f2513d05da51424c58e934f24d androidboot.vbmeta.invalidate_on_error=yes androidboot.veritymode=enforcing androidboot.bootdevice=4744000.sdhci androidboot.serialno=ZY22754V4Z androidboot.device=doha androidboot.revision=pvt androidboot.hwrev=0xC000 androidboot.radio=LATAM androidboot.powerup_reason=0x00100000 androidboot.bootreason=hardware_reset msm_poweroff.download_mode=0 androidboot.wifimacaddr=08:CC:27:67:21:50,08:CC:27:67:21:51 androidboot.btmacaddr=08:CC:27:67:21:4F androidboot.bootloader=MBM-3.0-doha_retail-cc3e8ae-191106 androidboot.carrier=retla androidboot.hardware.sku=XT2019-2 androidboot.mode=normal androidboot.baseband=msm msm_drm.dsi_display0=dsi_hx83112a_ds_vid_display: androidboot.slot_suffix=_a skip_initramfs rootwait ro init=/init androidboot.dtbo_idx=0 androidboot.dtb_idx=0 androidboot.dualsim=true androidboot.secure_hardware=1 androidboot.cid=0x0032 androidboot.write_protect=0 androidboot.bl_state=2
74[    0.000000] device-mapper: init: will configure 1 devices
75[    0.000000] log_buf_len individual max cpu contribution: 131072 bytes
76[    0.000000] log_buf_len total cpu_extra contributions: 917504 bytes
77[    0.000000] log_buf_len min size: 131072 bytes
78[    0.000000] log_buf_len: 1048576 bytes
79[    0.000000] early log buf free: 122444(93%)
80[    0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
81[    0.000000] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
82[    0.000000] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
83[    0.000000] software IO TLB: mapped [mem 0xfffbf000-0xfffff000] (0MB)
84[    0.000000] Memory: 3478896K/3847716K available (19964K kernel code, 1826K rwdata, 6416K rodata, 4096K init, 9401K bss, 159924K reserved, 208896K cma-reserved)
85[    0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
86[    0.000000] Preemptible hierarchical RCU implementation.
87[    0.000000]  RCU dyntick-idle grace-period acceleration is enabled.
88[    0.000000]  All grace periods are expedited (rcu_expedited).
89[    0.000000]  Tasks RCU enabled.
90[    0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0
91[    0.000000] GICv3: no VLPI support, no direct LPI support
92[    0.000000] GICv3: CPU0: found redistributor 0 region 0:0x000000000f300000
93[    0.000000]  Offload RCU callbacks from CPUs: 0-7.
94[    0.000000] arch_timer: cp15 and mmio timer(s) running at 19.20MHz (virt/virt).
95[    0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x46d987e47, max_idle_ns: 440795202767 ns
96[    0.000004] sched_clock: 56 bits at 19MHz, resolution 52ns, wraps every 4398046511078ns
97[    0.000015] clocksource: Switched to clocksource arch_sys_counter
98[    0.002348] Calibrating delay loop (skipped), value calculated using timer frequency.. 38.00 BogoMIPS (lpj=64000)
99[    0.002362] pid_max: default: 32768 minimum: 301
100[    0.002464] Security Framework initialized
101[    0.002471] SELinux:  Initializing.
102[    0.002528] SELinux:  Starting in permissive mode
103[    0.002571] Mount-cache hash table entries: 8192 (order: 4, 65536 bytes)
104[    0.002583] Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes)
105[    0.006808] NOHZ: local_softirq_pending 02
106[    0.008930] ASID allocator initialised with 65536 entries
107[    0.011049] Hierarchical SRCU implementation.
108[    0.016874] MSM Memory Dump base table set up
109[    0.016890] MSM Memory Dump apps data table set up
110[    0.017001] EFI services will not be available.
111[    0.019394] smp: Bringing up secondary CPUs ...
112[    0.029724] GICv3: CPU1: found redistributor 1 region 0:0x000000000f320000
113[    0.029785] CPU1: Booted secondary processor [51af8014]
114[    0.040070] GICv3: CPU2: found redistributor 2 region 0:0x000000000f340000
115[    0.040120] CPU2: Booted secondary processor [51af8014]
116[    0.050349] GICv3: CPU3: found redistributor 3 region 0:0x000000000f360000
117[    0.050398] CPU3: Booted secondary processor [51af8014]
118[    0.061571] CPU features: enabling workaround for ARM erratum 858921
119[    0.061607] CPU features: Unsupported CPU feature variation detected.
120[    0.061650] GICv3: CPU4: found redistributor 100 region 0:0x000000000f380000
121[    0.061691] arch_timer: Enabling local workaround for ARM erratum 858921
122[    0.061722] arch_timer: CPU4: Trapping CNTVCT access
123[    0.061742] CPU4: Booted secondary processor [51af8002]
124[    0.072311] GICv3: CPU5: found redistributor 101 region 0:0x000000000f3a0000
125[    0.072352] arch_timer: Enabling local workaround for ARM erratum 858921
126[    0.072379] arch_timer: CPU5: Trapping CNTVCT access
127[    0.072397] CPU5: Booted secondary processor [51af8002]
128[    0.082940] GICv3: CPU6: found redistributor 102 region 0:0x000000000f3c0000
129[    0.082981] arch_timer: Enabling local workaround for ARM erratum 858921
130[    0.083008] arch_timer: CPU6: Trapping CNTVCT access
131[    0.083026] CPU6: Booted secondary processor [51af8002]
132[    0.093554] GICv3: CPU7: found redistributor 103 region 0:0x000000000f3e0000
133[    0.093596] arch_timer: Enabling local workaround for ARM erratum 858921
134[    0.093623] arch_timer: CPU7: Trapping CNTVCT access
135[    0.093641] CPU7: Booted secondary processor [51af8002]
136[    0.093999] smp: Brought up 1 node, 8 CPUs
137[    0.094007] SMP: Total of 8 processors activated.
138[    0.094013] CPU features: detected feature: GIC system register CPU interface
139[    0.094016] CPU features: detected feature: 32-bit EL0 Support
140[    0.094757] CPU: All CPU(s) started at EL1
141[    0.094820] alternatives: patching kernel code
142[    0.096632] CPU7: update max cpu_capacity 1024
143[    0.120102] CPU0: update max cpu_capacity 640
144[    0.141216] Registered cp15_barrier emulation handler
145[    0.141235] Registered setend emulation handler
146[    0.141509] CPU4: update max cpu_capacity 1024
147[    0.141535] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 6370867519511994 ns
148[    0.141547] futex hash table entries: 2048 (order: 6, 262144 bytes)
149[    0.152458] pinctrl core: initialized pinctrl subsystem
150[    0.153266] DMI not present or invalid.
151[    0.153721] NET: Registered protocol family 16
152[    0.158233] schedtune: configured to support 5 boost groups
153[    0.159361] cpuidle: using governor menu
154[    0.159419] cpuidle: using governor qcom
155[    0.159624] NET: Registered protocol family 42
156[    0.170664] vdso: 2 pages (1 code @ ffffff9a0be07000, 1 data @ ffffff9a0ca04000)
157[    0.170679] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers.
158[    0.172750] DMA: preallocated 256 KiB pool for atomic allocations
159[    0.174310] exit: IPA_USB init success!
160[    0.174879] pstore: allocate compression buffer error!
161[    0.174952] console [pstore-1] enabled
162[    0.175071] pstore: Registered ramoops as persistent store backend
163[    0.175083] ramoops: attached 0xbf800@0xaf000000, ecc: 0/0
164[    0.183194] unable to find DT imem DLOAD mode node
165[    0.185784] unable to find DT imem EDLOAD mode node
166[    0.194521] platform 6080000.qcom,mss: assigned reserved memory node modem_region@4b000000
167[    0.195235] msm_watchdog f017000.qcom,wdt: wdog absent resource not present
168[    0.195827] msm_watchdog f017000.qcom,wdt: MSM Watchdog Initialized
169[    0.196755] sps:sps is ready.
170[    0.198503] platform ab00000.qcom,lpass: assigned reserved memory node pil_adsp_region@55300000
171[    0.198846] platform b300000.qcom,turing: assigned reserved memory node cdsp_regions@53500000
172[    0.199181] platform soc:mem_dump: assigned reserved memory node mem_dump_region
173[    0.203628] platform soc:qcom,smem: assigned reserved memory node smem@46000000
174[    0.204486] platform soc:qcom,msm-adsprpc-mem: assigned reserved memory node adsp_region
175[    0.205152] qcom_glink_rpm soc:rpm-glink: failed to register early notif -22
176[    0.205966] qcom_smd_rpm_probe: RPM-SMD running version 0
177[    0.206278] msm_glink soc:qcom,glink: [probe_subsystem]: no qcom,glink-label for wdsp
178[    0.208003] platform 46d00000.qseecom: assigned reserved memory node qseecom_region@5e400000
179[    0.210170] spmi spmi-0: PMIC arbiter version v5 (0x50010000)
180[    0.214009] platform soc:qcom,ipa_fws: assigned reserved memory node ips_fw_region@57100000
181[    0.214230] LCDB: qpnp_lcdb_regulator_probe: Failed to parse dt rc=-517
182[    0.214261] platform 5ae0000.qcom,venus: assigned reserved memory node pil_video_region@52e00000
183[    0.220332] trinket-pinctrl 400000.pinctrl: invalid resource
184[    0.298924] clk: add_opp: Set OPP pair (300000000 Hz, 588000 uv) on cpu0
185[    0.299354] clk: add_opp: Set OPP pair (1804800000 Hz, 944000 uv) on cpu0
186[    0.299445] clk: add_opp: Set OPP pair (300000000 Hz, 588000 uv) on cpu1
187[    0.299865] clk: add_opp: Set OPP pair (1804800000 Hz, 944000 uv) on cpu1
188[    0.299949] clk: add_opp: Set OPP pair (300000000 Hz, 588000 uv) on cpu2
189[    0.300428] clk: add_opp: Set OPP pair (1804800000 Hz, 944000 uv) on cpu2
190[    0.300517] clk: add_opp: Set OPP pair (300000000 Hz, 588000 uv) on cpu3
191[    0.300923] clk: add_opp: Set OPP pair (1804800000 Hz, 944000 uv) on cpu3
192[    0.301040] clk: add_opp: Set OPP pair (300000000 Hz, 588000 uv) on cpu4
193[    0.301457] clk: add_opp: Set OPP pair (2016000000 Hz, 960000 uv) on cpu4
194[    0.301545] clk: add_opp: Set OPP pair (300000000 Hz, 588000 uv) on cpu5
195[    0.301968] clk: add_opp: Set OPP pair (2016000000 Hz, 960000 uv) on cpu5
196[    0.302057] clk: add_opp: Set OPP pair (300000000 Hz, 588000 uv) on cpu6
197[    0.302464] clk: add_opp: Set OPP pair (2016000000 Hz, 960000 uv) on cpu6
198[    0.302562] clk: add_opp: Set OPP pair (300000000 Hz, 588000 uv) on cpu7
199[    0.302966] clk: add_opp: Set OPP pair (2016000000 Hz, 960000 uv) on cpu7
200[    0.304363] sched-energy: Sched-energy-costs installed from DT
201[    0.306337] cpufreq: driver osm-cpufreq up and running
202[    0.306347] clk: clk_cpu_osm_driver_probe: OSM CPUFreq driver inited
203[    0.308692] KPI: Bootloader start count = 67793
204[    0.308695] KPI: Bootloader end count = 2617052
205[    0.308696] KPI: Bootloader display count = 2067791727
206[    0.308697] KPI: Bootloader load kernel count = 4244601589
207[    0.308699] KPI: Kernel MPM timestamp = 2634386
208[    0.308700] KPI: Kernel MPM Clock frequency = 32768
209[    0.308710] socinfo_print: v0.15, id=394, ver=1.0, raw_id=266, raw_ver=0, hw_plat=34, hw_plat_ver=65536
210[    0.308710]  accessory_chip=0, hw_plat_subtype=0, pmic_model=65581, pmic_die_revision=65537 foundry_id=3 serial_number=2283460787 num_pmics=2 chip_family=0x64 raw_device_family=0x9 raw_device_number=0x1 nproduct_id=0x411 num_clusters=0x1 ncluster_array_offset=0xb0 num_defective_parts=0xc ndefective_parts_array_offset=0xb4 nmodem_supported=0xff
211[    0.308753] Minidump: Enabled with max number of regions 200
212[    0.309414] arm-smmu 59a0000.kgsl-smmu: Couldn't get clock: gcc_gpu_memnoc_gfx_clk
213[    0.309654] AXI: msm_bus_scale_register_client(): msm_bus_scale_register_client: Bus driver not ready.
214[    0.309657] arm-smmu c600000.apps-smmu: Bus client registration failed
215[    0.309783] vgaarb: loaded
216[    0.309888] qcom,qpnp-misc 1c40000.qcom,spmi:qcom,pm6125@0:qcom,misc@900: probe successful
217[    0.310080] CPU3: update max cpu_capacity 572
218[    0.310118] SCSI subsystem initialized
219[    0.310172] usbcore: registered new interface driver usbfs
220[    0.310182] usbcore: registered new interface driver hub
221[    0.310260] CPU5: update max cpu_capacity 1024
222[    0.310290] usbcore: registered new device driver usb
223[    0.310406] usb_phy_generic soc:usb_nop_phy: soc:usb_nop_phy supply vcc not found, using dummy regulator
224[    0.310603] qcom,qpnp-power-on 1c40000.qcom,spmi:qcom,pmi632@2:qcom,power-on@800: PMIC@SID2 Power-on reason: Triggered from CBL (External Power Supply) and 'cold' boot
225[    0.310615] qcom,qpnp-power-on 1c40000.qcom,spmi:qcom,pmi632@2:qcom,power-on@800: PON Register , addr=0x08C7, val=0x80
226[    0.310626] qcom,qpnp-power-on 1c40000.qcom,spmi:qcom,pmi632@2:qcom,power-on@800: PON Register , addr=0x08C5, val=0x1
227[    0.310629] qcom,qpnp-power-on 1c40000.qcom,spmi:qcom,pmi632@2:qcom,power-on@800: PMIC@SID2: Power-off reason: Triggered from SOFT (Software)
228[    0.310725] qcom,qpnp-power-on 1c40000.qcom,spmi:qcom,pm6125@0:qcom,power-on@800: PMIC@SID0 Power-on reason: Triggered from Hard Reset and 'cold' boot
229[    0.310736] qcom,qpnp-power-on 1c40000.qcom,spmi:qcom,pm6125@0:qcom,power-on@800: PON Register , addr=0x08C7, val=0x80
230[    0.310747] qcom,qpnp-power-on 1c40000.qcom,spmi:qcom,pm6125@0:qcom,power-on@800: PON Register , addr=0x08C5, val=0x80
231[    0.310750] qcom,qpnp-power-on 1c40000.qcom,spmi:qcom,pm6125@0:qcom,power-on@800: PMIC@SID0: Power-off reason: Triggered from KPDPWR_N (Long Power Key Hold)
232[    0.310854] input: qpnp_pon as /devices/platform/soc/1c40000.qcom,spmi/spmi-0/spmi0-00/1c40000.qcom,spmi:qcom,pm6125@0:qcom,power-on@800/input/input0
233[    0.311112] media: Linux media interface: v0.10
234[    0.311121] Linux video capture interface: v2.00
235[    0.312688] (NULL device *): hwmon_device_register() is deprecated. Please convert the driver to use hwmon_device_register_with_info().
236[    0.312729] (NULL device *): hwmon_device_register() is deprecated. Please convert the driver to use hwmon_device_register_with_info().
237[    0.312767] (NULL device *): hwmon_device_register() is deprecated. Please convert the driver to use hwmon_device_register_with_info().
238[    0.312800] (NULL device *): hwmon_device_register() is deprecated. Please convert the driver to use hwmon_device_register_with_info().
239[    0.312835] (NULL device *): hwmon_device_register() is deprecated. Please convert the driver to use hwmon_device_register_with_info().
240[    0.314935] dmi: Firmware registration failed.
241[    0.316244] platform soc:qcom,ion:qcom,ion-heap@27: assigned reserved memory node qseecom_region@5e400000
242[    0.316286] platform soc:qcom,ion:qcom,ion-heap@19: assigned reserved memory node qseecom_ta_region
243[    0.316354] platform soc:qcom,ion:qcom,ion-heap@10: assigned reserved memory node secure_display_region
244[    0.316420] platform soc:qcom,ion:qcom,ion-heap@22: assigned reserved memory node sdsp_region
245[    0.316485] ION heap system created
246[    0.316592] ION heap qsecom created at 0x000000005e400000 with size 1400000
247[    0.316594] ION heap qsecom_ta created at 0x00000000fec00000 with size 1000000
248[    0.316596] ION heap secure_heap created
249[    0.316599] ION heap secure_display created at 0x00000000f4000000 with size 8c00000
250[    0.347064] platform soc:qcom,ion:qcom,ion-heap@14: ion_secure_carveout: creating heap@0x5f800000, size 0x1e00000
251[    0.347068] ION heap secure_carveout created
252[    0.347074] ION heap adsp created at 0x00000000f3c00000 with size 400000
253[    0.348224] PMIC@SID2: PMI632 v2.0 options: 0, 0, 0, 0
254[    0.348319] PMIC@SID0: PM6125 v1.1 options: 0, 0, 0, 0
255[    0.348746] AXI: msm_bus_scale_register_client(): msm_bus_scale_register_client: Bus driver not ready.
256[    0.348748] ipa ipa3_pre_init:5488 fail to register with bus mgr!
257[    0.348786] ipa ipa3_plat_drv_probe:7029 ipa3_init failed
258[    0.349385] SDAM base=0xb600 size=128 registered successfully
259[    0.349501] Advanced Linux Sound Architecture Driver Initialized.
260[    0.349662] Bluetooth: Core ver 2.22
261[    0.349673] NET: Registered protocol family 31
262[    0.349674] Bluetooth: HCI device and connection manager initialized
263[    0.349678] Bluetooth: HCI socket layer initialized
264[    0.349680] Bluetooth: L2CAP socket layer initialized
265[    0.349687] Bluetooth: SCO socket layer initialized
266[    0.349883] NetLabel: Initializing
267[    0.349885] NetLabel:  domain hash size = 128
268[    0.349886] NetLabel:  protocols = UNLABELED CIPSOv4 CALIPSO
269[    0.349908] NetLabel:  unlabeled traffic allowed by default
270[    0.349933] pcie:pcie_init.
271[    0.357326] qcom-clk-smd-rpm soc:qcom,rpmcc: Registered RPM clocks
272[    0.357440] pm6125_s3_level: Bringing 1uV into 16-16uV
273[    0.357588] pm6125_s3_floor_level: Bringing 1uV into 16-16uV
274[    0.357897] pm6125_s3_level_ao: Bringing 1uV into 16-16uV
275[    0.358082] pm6125_s5_level: Bringing 1uV into 16-16uV
276[    0.358201] pm6125_s5_floor_level: Bringing 1uV into 16-16uV
277[    0.358494] pm6125_s5_level_ao: Bringing 1uV into 16-16uV
278[    0.359223] pm6125_l4: regulator get failed, ret=-517
279[    0.359761] pm6125_l4: supplied by pm6125_l7
280[    0.360673] pm6125_l15: supplied by pm6125_l10
281[    0.362407] LCDB: qpnp_lcdb_regulator_probe: LCDB module successfully registered! lcdb_en=1 ldo_voltage=5500mV ncp_voltage=5500mV bst_voltage=5650mV
282[    0.362451] sched-energy energy-costs: cpu=0 eff=1024 [freq=300000 cap=96 power_d0=12] -> [freq=1804800 cap=574 power_d0=172]
283[    0.362455] sched-energy energy-costs: cpu=1 eff=1024 [freq=300000 cap=96 power_d0=12] -> [freq=1804800 cap=574 power_d0=172]
284[    0.362458] sched-energy energy-costs: cpu=2 eff=1024 [freq=300000 cap=96 power_d0=12] -> [freq=1804800 cap=574 power_d0=172]
285[    0.362460] sched-energy energy-costs: cpu=3 eff=1024 [freq=300000 cap=96 power_d0=12] -> [freq=1804800 cap=574 power_d0=172]
286[    0.362464] sched-energy energy-costs: cpu=4 eff=1638 [freq=300000 cap=153 power_d0=211] -> [freq=2016000 cap=1024 power_d0=3391]
287[    0.362466] sched-energy energy-costs: cpu=5 eff=1638 [freq=300000 cap=153 power_d0=211] -> [freq=2016000 cap=1024 power_d0=3391]
288[    0.362469] sched-energy energy-costs: cpu=6 eff=1638 [freq=300000 cap=153 power_d0=211] -> [freq=2016000 cap=1024 power_d0=3391]
289[    0.362472] sched-energy energy-costs: cpu=7 eff=1638 [freq=300000 cap=153 power_d0=211] -> [freq=2016000 cap=1024 power_d0=3391]
290[    0.362474] sched-energy energy-costs: Sched-energy-costs capacity updated
291[    0.370745] gcc-trinket 1400000.qcom,gcc: Registered GCC clocks
292[    0.371667] gpu_cc_gx_gfx3d_clk_src: set OPP pair(320000000 Hz: 64 uV) on 5900000.qcom,kgsl-3d0
293[    0.371749] gpu_cc_gx_gfx3d_clk_src: set OPP pair(950000000 Hz: 416 uV) on 5900000.qcom,kgsl-3d0
294[    0.371814] gpu_cc-trinket 5990000.qcom,gpupcc: Registered GPU CC clocks
295[    0.372242] video_cc-trinket 5b00000.qcom,videocc: Registered Video CC clocks
296[    0.372399] arm-smmu 59a0000.kgsl-smmu:      non-coherent table walk
297[    0.372401] arm-smmu 59a0000.kgsl-smmu:      (IDR0.CTTW overridden by FW configuration)
298[    0.372404] arm-smmu 59a0000.kgsl-smmu:      stream matching with 4 register groups
299[    0.373443] AXI: msm_bus_scale_register_client(): msm_bus_scale_register_client: Bus driver not ready.
300[    0.373446] arm-smmu c600000.apps-smmu: Bus client registration failed
301[    0.373745] AXI: msm_bus_scale_register_client(): msm_bus_scale_register_client: Bus driver not ready.
302[    0.373747] ipa ipa3_pre_init:5488 fail to register with bus mgr!
303[    0.373787] ipa ipa3_plat_drv_probe:7029 ipa3_init failed
304[    0.375707] disp_cc-trinket 5f00000.qcom,dispcc: Registered Display CC clocks
305[    0.375938] AXI: msm_bus_scale_register_client(): msm_bus_scale_register_client: Bus driver not ready.
306[    0.375940] arm-smmu c600000.apps-smmu: Bus client registration failed
307[    0.376169] AXI: msm_bus_scale_register_client(): msm_bus_scale_register_client: Bus driver not ready.
308[    0.376171] ipa ipa3_pre_init:5488 fail to register with bus mgr!
309[    0.376191] ipa ipa3_plat_drv_probe:7029 ipa3_init failed
310[    0.376815] clocksource: Switched to clocksource arch_sys_counter
311[    0.400695] VFS: Disk quotas dquot_6.6.0
312[    0.400718] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
313[    0.401676] mdss_pll_probe: MDSS pll label = MDSS DSI 0 PLL
314[    0.401679] mdss_pll_probe: mdss_pll_probe: label=MDSS DSI 0 PLL PLL SSC enabled
315[    0.401849] mdss_pll 5e94400.qcom,mdss_dsi_pll: Failed to create debugfs directory
316[    0.401853] mdss_pll 5e94400.qcom,mdss_dsi_pll: Failed to create debugfs directory
317[    0.401855] mdss_pll 5e94400.qcom,mdss_dsi_pll: Failed to create debugfs directory
318[    0.403244] dsi_pll_clock_register_14nm: Registered DSI PLL ndx=0 clocks successfully
319[    0.403441] msm_bus_fabric_init_driver
320[    0.406318] msm_bus_dev_init_qos: Skipping QOS init for 26
321[    0.406343] msm_bus_device 1880000.ad-hoc-bus: Bus scaling driver probe successful
322[    0.406931] NET: Registered protocol family 2
323[    0.407224] TCP established hash table entries: 32768 (order: 6, 262144 bytes)
324[    0.407303] TCP bind hash table entries: 32768 (order: 7, 524288 bytes)
325[    0.407452] TCP: Hash tables configured (established 32768 bind 32768)
326[    0.407501] UDP hash table entries: 2048 (order: 4, 65536 bytes)
327[    0.407523] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
328[    0.407609] NET: Registered protocol family 1
329[    0.407618] PCI: CLS 0 bytes, default 128
330[    0.408040] arm-smmu c600000.apps-smmu:      non-coherent table walk
331[    0.408043] arm-smmu c600000.apps-smmu:      (IDR0.CTTW overridden by FW configuration)
332[    0.408046] arm-smmu c600000.apps-smmu:      stream matching with 54 register groups
333[    0.409294] iommu: Adding device 4ac0000.qcom,qupv3_0_geni_se:qcom,iommu_qupv3_0_geni_se_cb to group 0
334[    0.409362] iommu: Adding device 4cc0000.qcom,qupv3_1_geni_se:qcom,iommu_qupv3_1_geni_se_cb to group 1
335[    0.415313] ipa ipa3_smp2p_probe:6904 fail to get smp2p clk resp bit -517
336[    0.415537] iommu: Adding device soc:ipa_smmu_ap to group 2
337[    0.415625] iommu: Adding device soc:ipa_smmu_wlan to group 3
338[    0.415713] iommu: Adding device soc:ipa_smmu_uc to group 4
339[    0.415778] ipa ipa3_smp2p_probe:6904 fail to get smp2p clk resp bit -517
340[    0.416210] Trying to unpack rootfs image as initramfs...
341[    0.984357] Freeing initrd memory: 23232K
342[    0.987083] hw perfevents: enabled with armv8_pmuv3 PMU driver, 7 counters available
343[    0.995769] audit: initializing netlink subsys (disabled)
344[    0.996089] audit: type=2000 audit(0.993:1): state=initialized audit_enabled=0 res=1
345[    0.996295] Initialise system trusted keyrings
346[    0.996563] workingset: timestamp_bits=46 max_order=20 bucket_order=0
347[    0.999434] Registering sdcardfs 0.1
348[    0.999569] fuse init (API version 7.26)
349[    0.999862] SELinux:  Registering netfilter hooks
350[    1.000477] pfk_ext4 [pfk_ext4_init]: PFK EXT4 inited successfully
351[    1.000479] pfk_f2fs [pfk_f2fs_init]: PFK F2FS inited successfully
352[    1.000486] pfk [pfk_init]: Driver initialized successfully
353[    1.007321] Key type asymmetric registered
354[    1.007325] Asymmetric key parser 'x509' registered
355[    1.007336] io scheduler noop registered
356[    1.007413] io scheduler cfq registered (default)
357[    1.007415] io scheduler mq-deadline registered
358[    1.007417] io scheduler kyber registered
359[    1.016344] fb0: Virtual frame buffer device, using 1024K of video memory
360[    1.018444] iommu: Adding device 4a00000.qcom,gpi-dma to group 5
361[    1.020397] iommu: Adding device 4c00000.qcom,gpi-dma to group 6
362[    1.024465] iommu: Adding device c800000.qcom,icnss to group 7
363[    1.024528] icnss: Recursive recovery allowed for WLAN
364[    1.024536] icnss: adc_tm_dev probe defer
365[    1.026356] memshare_child soc:qcom,memshare:qcom,client_1: for memshare_GPS segments only will be dumped.
366[    1.026422] memshare_child soc:qcom,memshare:qcom,client_2: for memshare_FTM segments only will be dumped.
367[    1.026465] memshare_child soc:qcom,memshare:qcom,client_3: for memshare_DIAG segments only will be dumped.
368[    1.027604] minidump-id not found for adsp
369[    1.027965] minidump-id not found for cdsp
370[    1.028373] minidump-id not found for ipa_fws
371[    1.028383] subsys-pil-tz soc:qcom,ipa_fws: for ipa_fws segments only will be dumped.
372[    1.028410] subsys-pil-tz soc:qcom,ipa_fws: for md_ipa_fws segments only will be dumped.
373[    1.028706] minidump-id not found for venus
374[    1.028717] subsys-pil-tz 5ae0000.qcom,venus: for venus segments only will be dumped.
375[    1.028743] subsys-pil-tz 5ae0000.qcom,venus: for md_venus segments only will be dumped.
376[    1.029033] minidump-id not found for a610_zap
377[    1.029042] subsys-pil-tz soc:qcom,kgsl-hyp: for a610_zap segments only will be dumped.
378[    1.029069] subsys-pil-tz soc:qcom,kgsl-hyp: for md_a610_zap segments only will be dumped.
379[    1.032668] smp2p_sleepstate soc:qcom,smp2p_sleepstate: got smp2p-sleepstate-in irq 221
380[    1.035275] msm_geni_serial 4a90000.qcom,qup_uart: Serial port0 added.FifoSize 64 is_console1
381[    1.035330] 4a90000.qcom,qup_uart: ttyMSM0 at MMIO 0x4a90000 (irq = 87, base_baud = 0) is a MSM
382[    1.036064] msm_geni_serial 4c90000.qcom,qup_uart: Wakeup byte 0xfd
383[    1.036196] msm_geni_serial 4c90000.qcom,qup_uart: Serial port0 added.FifoSize 64 is_console0
384[    1.036413] 4c90000.qcom,qup_uart: ttyHS0 at MMIO 0x4c90000 (irq = 91, base_baud = 0) is a MSM
385[    1.036989] msm_geni_serial_init: Driver initialized
386[    1.040201] random: crng init done
387[    1.051017] dsi_phy 5e94400.qcom,mdss_dsi_phy0: 5e94400.qcom,mdss_dsi_phy0 supply gdsc not found, using dummy regulator
388[    1.051131] msm-dsi-phy:[dsi_phy_driver_probe] Probe successful for dsi-phy-0
389[    1.051776] drm_dsi_ctrl 5e94000.qcom,mdss_dsi_ctrl0: 5e94000.qcom,mdss_dsi_ctrl0 supply refgen not found, using dummy regulator
390[    1.051888] AXI: get_pdata(): Error: Client name not found
391[    1.051910] AXI: msm_bus_cl_get_pdata(): client has to provide missing entry for successful registration
392[    1.051917] dsi-ctrl:[dsi_ctrl_dev_probe] Probe successful for dsi-ctrl-0
393[    1.052483] msm-dsi-display:[dsi_display_parse_te_data] invalid vsync source selection
394[    1.052496] OF: graph: no port node found in /soc/qcom,dsi-display
395[    1.052539] msm-dsi-panel:[dsi_panel_parse_triggers:1436] [mipi_mot_vid_ds_1080p_630] fallback to default te-pin-select
396[    1.052567] msm-dsi-panel:[dsi_panel_parse_qsync_caps:1629] [mipi_mot_vid_ds_1080p_630] qsync min fps not defined rc:-22
397[    1.052574] msm-dsi-panel:[dsi_panel_get:3853] failed to parse qsync features, rc=-22
398[    1.052615] msm-dsi-panel:[dsi_panel_parse_reset_sequence:2290] RESET SEQ LENGTH = 24
399[    1.052658] msm-dsi-panel:[dsi_panel_parse_bl_config:2703] [mipi_mot_vid_ds_1080p_630] bl_2bytes_0xff0f_enable=0
400[    1.052661] msm-dsi-panel:[dsi_panel_parse_bl_config:2709] [mipi_mot_vid_ds_1080p_630] bl_2bytes_enable=1
401[    1.052681] msm-dsi-panel:[dsi_panel_parse_bl_config:2756] [mipi_mot_vid_ds_1080p_630]  bl_config: type=2, bl_max_level=4095, brightness_default_level=255, en_gpio=1277, hbm_en_gpio=1273, rc=-22
402[    1.052686] msm-dsi-panel:[dsi_panel_parse_misc_features:2419] dsi_panel_parse_misc_features: ulps feature disabled
403[    1.052688] msm-dsi-panel:[dsi_panel_parse_misc_features:2425] dsi_panel_parse_misc_features: ulps during suspend feature disabled
404[    1.052723] msm-dsi-panel:[dsi_panel_parse_esd_config:3614] ESD enabled with mode: register_read
405[    1.052730] msm-dsi-panel:[dsi_panel_parse_mot_panel_config:3718] dsi_panel_parse_mot_panel_config: disp_on_chk_val = 0x9d is defined
406[    1.052755] msm-dsi-panel:[dsi_panel_parse_panel_cfg:1607] BL: panel(primary) =ds_hx83112a_fhd_vid, panel_id =0x00ff000092120403  panel_ver=0x00000000002a1183
407[    1.052758] msm-dsi-panel:[dsi_panel_parse_panel_cfg:1610] BL: manufacture_id(0xDA) = 0x83 controller_ver(0xDB) = 0x11 controller_drv_ver(0XDC) = 0x2a
408[    1.053989] iommu: Adding device 5e00000.qcom,mdss_mdp to group 8
409[    1.055370] [drm:sde_dbg_init:5188] evtlog_status: enable:0, panic:1, dump:2
410[    1.055412] msm_drm 5e00000.qcom,mdss_mdp: bound soc:qcom,wb-display@0 (ops sde_wb_comp_ops)
411[    1.055816] msm-dsi-display:[dsi_display_bind] Successfully bind display panel 'dsi_hx83112a_ds_vid_display'
412[    1.055820] msm-dsi-display:[dsi_display_register_te_irq] Unable to register for TE IRQ
413[    1.055831] msm_drm 5e00000.qcom,mdss_mdp: bound soc:qcom,dsi-display (ops dsi_display_comp_ops)
414[    1.055873] [drm] mapped mdp address space @ffffff800fe00000
415[    1.055956] msm_drm 5e00000.qcom,mdss_mdp: failed to get memory resource: vbif_nrt_phys
416[    1.056015] [drm:_sde_kms_get_splash_data:3182] splash mem num_regions:1
417[    1.056037] [drm:_sde_kms_get_splash_data:3217] splash mem for disp:1 add:5c000000 size:f00000
418[    1.056046] [sde_rsc:sde_rsc_client_create:90]: rsc not probed yet or not available
419[    1.057708] [drm:sde_kms_hw_init:3343] sde hardware revision:0x50040000
420[    1.058523] [drm] Created domain mdp_ns [80000000,80000000] secure=0
421[    1.060176] iommu: Adding device 5e00000.qcom,mdss_mdp:qcom,smmu_sde_sec_cb to group 9
422[    1.060205] [drm] probing device qcom,smmu_sde_sec
423[    1.060211] [drm] Created domain mdp_s [80000000,80000000] secure=1
424[    1.062350] [sde_rsc:is_sde_rsc_available:244]: rsc idx:0 not probed yet or not available
425[    1.062398] [sde_rsc:sde_rsc_client_create:90]: rsc not probed yet or not available
426[    1.062656] [sde_rsc:sde_rsc_client_create:90]: rsc not probed yet or not available
427[    1.062720] [drm:reg_dmav1_init_sspp_op_v4] *ERROR* invalid feature map 12 for feature 31
428[    1.062876] [drm:reg_dmav1_init_sspp_op_v4] *ERROR* invalid feature map 12 for feature 31
429[    1.063680] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
430[    1.063682] [drm] No driver support for vblank timestamp query.
431[    1.064244] [drm] Initialized msm_drm 1.2.0 20130625 for 5e00000.qcom,mdss_mdp on minor 0
432[    1.064342] msm-dsi-panel:[dsi_panel_parse_cmd_sets_sub:2213] [qcom,mdss-dsi-hbm-on-command-state] command state unrecognized-dsi_ls_mode
433[    1.064351] msm-dsi-panel:[dsi_panel_parse_cmd_sets_sub:2213] [qcom,mdss-dsi-hbm-off-command-state] command state unrecognized-dsi_ls_mode
434[    1.064368] msm-dsi-panel:[dsi_panel_parse_param_prop:3664] dsi_panel_parse_param_prop:  HBM from qcom,mdss-dsi-hbm-off-command
435[    1.064373] msm-dsi-panel:[dsi_panel_parse_cmd_sets_sub:2213] [qcom,mdss-dsi-hbm-off-command-state] command state unrecognized-dsi_ls_mode
436[    1.064378] msm-dsi-panel:[dsi_panel_parse_param_prop:3664] dsi_panel_parse_param_prop:  HBM from qcom,mdss-dsi-hbm-on-command
437[    1.064383] msm-dsi-panel:[dsi_panel_parse_cmd_sets_sub:2213] [qcom,mdss-dsi-hbm-on-command-state] command state unrecognized-dsi_ls_mode
438[    1.064388] msm-dsi-panel:[dsi_panel_parse_param_prop:3676] HBM: feature enabled.
439[    1.064390] msm-dsi-panel:[dsi_panel_parse_param_prop:3664] dsi_panel_parse_param_prop:  CABC from qcom,mdss-dsi-cabc-ui-command
440[    1.064395] msm-dsi-panel:[dsi_panel_parse_param_prop:3664] dsi_panel_parse_param_prop:  CABC from qcom,mdss-dsi-cabc-mv-command
441[    1.064399] msm-dsi-panel:[dsi_panel_parse_param_prop:3664] dsi_panel_parse_param_prop:  CABC from qcom,mdss-dsi-cabc-dis-command
442[    1.064403] msm-dsi-panel:[dsi_panel_parse_param_prop:3676] CABC: feature enabled.
443[    1.064405] msm-dsi-panel:[dsi_panel_parse_param_prop:3664] dsi_panel_parse_param_prop:  ACL from qcom,mdss-dsi-acl-off-command
444[    1.064408] msm-dsi-panel:[dsi_panel_parse_param_prop:3669] dsi_panel_parse_param_prop: panel param cmd ACL parsing failed
445[    1.064412] msm-dsi-panel:[dsi_panel_parse_param_prop:3679] ACL: feature disabled.
446[    1.064572] dsi-ctrl:[_dsi_ctrl_setup_isr] [DSI_0] IRQ 223 registered
447[    1.083983] iommu: Adding device 59a0000.qcom,kgsl-iommu:gfx3d_user to group 10
448[    1.084269] iommu: Adding device 59a0000.qcom,kgsl-iommu:gfx3d_secure to group 11
449[    1.138142] brd: module loaded
450[    1.141843] loop: module loaded
451[    1.141984] zram: Added device: zram0
452[    1.143248] QSEECOM: qseecom_probe: qseecom.qsee_version = 0x1401000
453[    1.143264] QSEECOM: qseecom_retrieve_ce_data: Device does not support PFE
454[    1.143269] QSEECOM: qseecom_probe: qseecom clocks handled by other subsystem
455[    1.143272] QSEECOM: qseecom_probe: qseecom.qsee_reentrancy_support = 2
456[    1.143463] QSEECOM: qseecom_probe: qseecom.whitelist_support = 1
457[    1.144634] iommu: Adding device 1b20000.qcedev to group 12
458[    1.147485] qce 1b20000.qcedev: QTI Crypto 5.5.0 device found @0x1b20000
459[    1.147673] sps:BAM 0x0000000001b04000 is registered.
460[    1.147836] sps:BAM 0x0000000001b04000 (va:0xffffff800ffc0000) enabled: ver:0x27, number of pipes:16
461[    1.148048] QCE50: qce_sps_init:  QTI MSM CE-BAM at 0x0000000001b04000 irq 45
462[    1.150200] iommu: Adding device 1b20000.qcrypto to group 13
463[    1.152019] QCE50: __qce_get_device_tree_data: CE operating frequency is not defined, setting to default 100MHZ
464[    1.152878] qcrypto 1b20000.qcrypto: QTI Crypto 5.5.0 device found @0x1b20000
465[    1.153183] QCE50: qce_sps_init:  QTI MSM CE-BAM at 0x0000000001b04000 irq 45
466[    1.154407] qcrypto 1b20000.qcrypto: qcrypto-ecb-aes
467[    1.154543] qcrypto 1b20000.qcrypto: qcrypto-cbc-aes
468[    1.154686] qcrypto 1b20000.qcrypto: qcrypto-ctr-aes
469[    1.154811] qcrypto 1b20000.qcrypto: qcrypto-ecb-des
470[    1.154940] qcrypto 1b20000.qcrypto: qcrypto-cbc-des
471[    1.155062] qcrypto 1b20000.qcrypto: qcrypto-ecb-3des
472[    1.155185] qcrypto 1b20000.qcrypto: qcrypto-cbc-3des
473[    1.155308] qcrypto 1b20000.qcrypto: qcrypto-xts-aes
474[    1.155430] qcrypto 1b20000.qcrypto: qcrypto-sha1
475[    1.155558] qcrypto 1b20000.qcrypto: qcrypto-sha256
476[    1.155684] qcrypto 1b20000.qcrypto: qcrypto-aead-hmac-sha1-cbc-aes
477[    1.155807] qcrypto 1b20000.qcrypto: qcrypto-aead-hmac-sha1-cbc-des
478[    1.155932] qcrypto 1b20000.qcrypto: qcrypto-aead-hmac-sha1-cbc-3des
479[    1.156055] qcrypto 1b20000.qcrypto: qcrypto-aead-hmac-sha256-cbc-aes
480[    1.156177] qcrypto 1b20000.qcrypto: qcrypto-aead-hmac-sha256-cbc-des
481[    1.156298] qcrypto 1b20000.qcrypto: qcrypto-aead-hmac-sha256-cbc-3des
482[    1.156424] qcrypto 1b20000.qcrypto: qcrypto-hmac-sha1
483[    1.156547] qcrypto 1b20000.qcrypto: qcrypto-hmac-sha256
484[    1.156676] qcrypto 1b20000.qcrypto: qcrypto-aes-ccm
485[    1.156814] qcrypto 1b20000.qcrypto: qcrypto-rfc4309-aes-ccm
486[    1.157652] qcom_ice_get_device_tree_data: No vdd-hba-supply regulator, assuming not needed
487[    1.158384] SCSI Media Changer driver v0.25
488[    1.159664] Ethernet Channel Bonding Driver: v3.7.1 (April 27, 2011)
489[    1.160615] libphy: Fixed MDIO Bus: probed
490[    1.160618] tun: Universal TUN/TAP device driver, 1.6
491[    1.160652] PPP generic driver version 2.4.2
492[    1.160685] PPP BSD Compression module registered
493[    1.160687] PPP Deflate Compression module registered
494[    1.160706] PPP MPPE Compression module registered
495[    1.160708] NET: Registered protocol family 24
496[    1.160805] CLD80211: Initializing
497[    1.160869] usbcore: registered new interface driver r8152
498[    1.160883] usbcore: registered new interface driver asix
499[    1.160948] usbcore: registered new interface driver ax88179_178a
500[    1.160958] usbcore: registered new interface driver cdc_ether
501[    1.160966] usbcore: registered new interface driver net1080
502[    1.160975] usbcore: registered new interface driver cdc_subset
503[    1.160986] usbcore: registered new interface driver zaurus
504[    1.160999] usbcore: registered new interface driver cdc_ncm
505[    1.168427] msm_sharedmem: msm_sharedmem_probe: Device created for client 'rmtfs'
506[    1.169886] msm-qusb-phy 1613000.qusb: 1613000.qusb supply USB3_GDSC not found, using dummy regulator
507[    1.171595] msm-dwc3 4e00000.ssusb: USB core frequency = 133333333
508[    1.171711] msm-dwc3 4e00000.ssusb: setting lpm_to_suspend_delay to zero.
509[    1.172785] msm-dwc3 4e00000.ssusb: DWC3_GSI_EVT_BUF_ALLOC
510[    1.173039] dwc3 4e00000.dwc3: changing max_speed on rev 00000000
511[    1.176250] msm-dwc3 4e00000.ssusb: setting pm-qos-latency to zero.
512[    1.176270] Invalid index Defaulting curr to 0
513[    1.177213] msm-dwc3 4e00000.ssusb: DWC3_GSI_EVT_BUF_FREE
514[    1.178639] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
515[    1.178643] ehci-pci: EHCI PCI platform driver
516[    1.178656] ehci-platform: EHCI generic platform driver
517[    1.179023] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
518[    1.179048] ohci-pci: OHCI PCI platform driver
519[    1.179069] ohci-platform: OHCI generic platform driver
520[    1.179784] usbcore: registered new interface driver uas
521[    1.179806] usbcore: registered new interface driver usb-storage
522[    1.179816] usbcore: registered new interface driver usb_ehset_test
523[    1.179826] usbcore: registered new interface driver lvs
524[    1.181211] qcom,qpnp-rtc 1c40000.qcom,spmi:qcom,pm6125@0:qcom,pm6125_rtc: rtc core: registered qpnp_rtc as rtc0
525[    1.181481] i2c /dev entries driver
526[    1.183189] i2c_geni 4a8c000.i2c: Bus frequency not specified, default to 400KHz.
527[    1.183481] nq-nci 0-0028: ese GPIO <OPTIONAL> error getting from OF node
528[    1.183523] nq-nci 0-0028: nqx_probe: ese gpio not provided
529[    1.183861] IR NEC protocol handler initialized
530[    1.183864] IR RC5(x/sz) protocol handler initialized
531[    1.183865] IR RC6 protocol handler initialized
532[    1.183867] IR JVC protocol handler initialized
533[    1.183869] IR Sony protocol handler initialized
534[    1.183871] IR SANYO protocol handler initialized
535[    1.183872] IR Sharp protocol handler initialized
536[    1.183873] IR MCE Keyboard/mouse protocol handler initialized
537[    1.183875] IR XMP protocol handler initialized
538[    1.184491] sde_mdp_parse_dt_prop_len: <SDEROT_INFO> prop qcom,mdss-rot-vbif-memtype : doesn't exist in device tree
539[    1.184498] sde_mdp_parse_dt_prop_len: <SDEROT_INFO> prop qcom,mdss-inline-rot-qos-lut : doesn't exist in device tree
540[    1.184501] sde_mdp_parse_dt_prop_len: <SDEROT_INFO> prop qcom,mdss-inline-rot-danger-lut : doesn't exist in device tree
541[    1.184503] sde_mdp_parse_dt_prop_len: <SDEROT_INFO> prop qcom,mdss-inline-rot-safe-lut : doesn't exist in device tree
542[    1.184602] register_client_adhoc:Failed to find path.src 1 dest 590
543[    1.184605] sde_mdp_bus_scale_register: <SDEROT_WARN> reg_bus_client register failed
544[    1.185662] No change in context(0==0), skip
545[    1.186898] sde_rotator_evtlog_create_debugfs: evtlog_status: enable:1, panic:1, dump:2
546[    1.188356] sde_rotator 5e00000.qcom,mdss_rotator: <SDEROT_INFO> SDE v4l2 rotator probe success
547[    1.189676] iommu: Adding device 5e00000.qcom,mdss_rotator:qcom,smmu_rot_unsec_cb to group 14
548[    1.189739] sde_smmu_probe: <SDEROT_INFO> iommu v2 domain[0] mapping and clk register successful!
549[    1.190868] iommu: Adding device 5e00000.qcom,mdss_rotator:qcom,smmu_rot_sec_cb to group 15
550[    1.190897] sde_smmu_probe: <SDEROT_INFO> iommu v2 domain[1] mapping and clk register successful!
551[    1.192795] iommu: Adding device 5a00000.qcom,vidc:non_secure_cb to group 16
552[    1.193285] iommu: Adding device 5a00000.qcom,vidc:secure_bitstream_cb to group 17
553[    1.194780] iommu: Adding device 5a00000.qcom,vidc:secure_pixel_cb to group 18
554[    1.195854] iommu: Adding device 5a00000.qcom,vidc:secure_non_pixel_cb to group 19
555[    1.197792] iommu: Adding device soc:qcom,cam_smmu:msm_cam_smmu_cb1 to group 20
556[    1.197823] CAM-SMMU cam_smmu_populate_sids:2121 __debug cnt = 6, cb->name: :vfe sid [0] = 1056
557[    1.197823] ,
558[    1.197826] CAM-SMMU cam_smmu_populate_sids:2121 __debug cnt = 6, cb->name: :vfe sid [1] = 1057
559[    1.197826] ,
560[    1.198334] iommu: Adding device soc:qcom,cam_smmu:msm_cam_smmu_cb2 to group 21
561[    1.198359] CAM-SMMU cam_smmu_populate_sids:2121 __debug cnt = 3, cb->name: :cpp sid [0] = 2048
562[    1.198359] ,
563[    1.198762] iommu: Adding device soc:qcom,cam_smmu:msm_cam_smmu_cb4 to group 22
564[    1.198783] CAM-SMMU cam_smmu_populate_sids:2121 __debug cnt = 3, cb->name: :jpeg_enc0 sid [0] = 2080
565[    1.198783] ,
566[    1.199195] iommu: Adding device soc:qcom,cam_smmu:msm_cam_smmu_cb5 to group 23
567[    1.199217] CAM-SMMU cam_smmu_populate_sids:2121 __debug cnt = 3, cb->name: :jpeg_dma sid [0] = 2081
568[    1.199217] ,
569[    1.205000] msm_actuator_platform_probe:2085 msm_actuator_platform_probe: No/Error Actuator GPIOs
570[    1.205485] msm_eeprom_platform_probe failed 1803
571[    1.205674] msm_eeprom_platform_probe failed 1803
572[    1.205858] msm_eeprom_platform_probe failed 1803
573[    1.206033] msm_eeprom_platform_probe failed 1803
574[    1.206584] msm_camera_get_dt_vreg_data:1125 number of entries is 0 or not present in dts
575[    1.212154] MSM-CPP cpp_init_hardware:1135 CPP HW Version: 0x60010004
576[    1.212165] MSM-CPP cpp_init_hardware:1153 stream_cnt:0
577[    1.212999] MSM-CPP cpp_release_hardware:1216 cpp hw release done
578[    1.213955] CAM-SOC msm_camera_get_reg_base:894 err: mem resource vfe_fuse not found
579[    1.213964] CAM-SOC msm_camera_get_res_size:937 err: mem resource vfe_fuse not found
580[    1.214199] i2c_geni 4a84000.i2c: i2c error :-107
581[    1.214218] nq-nci 0-0028: nfcc_hw_check: - i2c_master_send core reset Error
582[    1.214623] CAM-SOC msm_camera_get_reg_base:894 err: mem resource vfe_fuse not found
583[    1.214630] CAM-SOC msm_camera_get_res_size:937 err: mem resource vfe_fuse not found
584[    1.217094] __msm_jpeg_init:1595] Jpeg Device id 0
585[    1.219309] Couldn't parse device tree rc=-517
586[    1.227393] bcl_soc:bcl_soc_probe soc TZ register failed. err:-19
587[    1.228605] device-mapper: uevent: version 1.0.3
588[    1.228706] device-mapper: ioctl: 4.37.0-ioctl (2017-09-20) initialised: dm-devel@redhat.com
589[    1.229183] bt_dt_parse_vreg_info: qca,bt-vdd-vl: is not provided in device tree
590[    1.229186] bt_dt_parse_vreg_info: qca,bt-vdd-vm: is not provided in device tree
591[    1.229188] bt_dt_parse_vreg_info: qca,bt-vdd-5c: is not provided in device tree
592[    1.229190] bt_dt_parse_vreg_info: qca,bt-vdd-vh: is not provided in device tree
593[    1.229201] bt_dt_parse_vreg_info: qca,bt-vdd-ldo: is not provided in device tree
594[    1.229203] bt_dt_parse_vreg_info: qca,bt-chip-pwd: is not provided in device tree
595[    1.229206] bt_power_populate_dt_pinfo: bt-reset-gpio not provided in device tree
596[    1.229215] bt_dt_parse_clk_info: clocks is not provided in device tree
597[    1.229219] bt_power_populate_dt_pinfo: clock not provided in device tree
598[    1.230124] sdhci: Secure Digital Host Controller Interface driver
599[    1.230127] sdhci: Copyright(c) Pierre Ossman
600[    1.230128] sdhci-pltfm: SDHCI platform and OF driver helper
601[    1.231228] usbcore: registered new interface driver usbhid
602[    1.231231] usbhid: USB HID core driver
603[    1.231311] ashmem: initialized
604[    1.232424] qcom_ice_get_pdevice: found ice device ffffffe270805c00
605[    1.232428] qcom_ice_get_pdevice: matching platform device ffffffe27a381c00
606[    1.232437] ipa_ut ipa_ut_module_init:1043 Loading IPA test module...
607[    1.236641] qcom_ice 4748000.sdcc1ice: QC ICE 3.1.79 device found @0xffffff8010120000
608[    1.237695] mmc0: SDHCI controller on 4744000.sdhci [4744000.sdhci] using 64-bit ADMA in CMDQ mode
609[    1.244711] i2c_geni 4a84000.i2c: i2c error :-107
610[    1.244731] nq-nci 0-0028: nfcc_hw_check: - i2c_master_send get version cmd Error
611[    1.244739] nq-nci 0-0028: nfcc_hw_check: - NFCC HW not available
612[    1.244787] nq-nci 0-0028: nqx_probe: probing NFCC NQxxx exited successfully
613[    1.306749] mmc0: Out-of-interrupt timeout is 100[ms]
614[    1.306754] mmc0: eMMC FW version: 0x04
615[    1.306755] mmc0: CMDQ supported: depth: 32
616[    1.315190] cmdq_host_alloc_tdl: desc_size: 1024 data_sz: 63488 slot-sz: 32
617[    1.315690] mmc0: CMDQ enabled on card
618[    1.315705] mmc0: new HS400 Enhanced strobe MMC card at address 0001
619[    1.316624] sdhci_msm_pm_qos_cpu_init (): voted for group #0 (mask=0xf) latency=-1
620[    1.316628] sdhci_msm_pm_qos_cpu_init (): voted for group #1 (mask=0xf0) latency=-1
621[    1.316773] mmcblk0: mmc0:0001 S0J9K8 58.2 GiB
622[    1.316984] mmcblk0rpmb: mmc0:0001 S0J9K8 partition 3 16.0 MiB
623[    1.319233]  mmcblk0: p1 p2 p3 p4 p5 p6 p7 p8 p9 p10 p11 p12 p13 p14 p15 p16 p17 p18 p19 p20 p21 p22 p23 p24 p25 p26 p27 p28 p29 p30 p31 p32 p33 p34 p35 p36 p37 p38 p39 p40 p41 p42 p43 p44 p45 p46 p47 p48 p49 p50 p51 p52 p53 p54 p55 p56 p57 p58 p59 p60 p61 p62 p63 p64 p65 p66 p67 p68 p72 p73 p74 p75 p76 p77 p78 p79 p80
624[    1.325036] sdhci_msm 4784000.sdhci: sdhci_msm_probe: ICE device is not enabled
625[    1.340366] mmc1: SDHCI controller on 4784000.sdhci [4784000.sdhci] using 64-bit ADMA in legacy mode
626[    1.375351] bimc-bwmon 1b8e200.qcom,cpu-cpu-ddr-bwmon: BW HWmon governor registered.
627[    1.377304] arm-memlat-mon soc:qcom,cpu0-cpu-ddr-latmon: Memory Latency governor registered.
628[    1.378377] arm-memlat-mon soc:qcom,cpu4-cpu-ddr-latmon: Memory Latency governor registered.
629[    1.379433] arm-memlat-mon soc:qcom,cpu0-computemon: Compute governor registered.
630[    1.380546] arm-memlat-mon soc:qcom,cpu4-computemon: Compute governor registered.
631[    1.391292] usbcore: registered new interface driver snd-usb-audio
632[    1.391405] iommu: Adding device soc:usb_audio_qmi_dev to group 24
633[    1.392454] GACT probability NOT on
634[    1.392462] Mirror/redirect action on
635[    1.392466] u32 classifier
636[    1.392467]     Actions configured
637[    1.392472] Netfilter messages via NETLINK v0.30.
638[    1.392540] nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
639[    1.392587] ctnetlink v0.93: registering with nfnetlink.
640[    1.392733] xt_time: kernel timezone is -0000
641[    1.392782] IPv4 over IPsec tunneling driver
642[    1.392963] ip_tables: (C) 2000-2006 Netfilter Core Team
643[    1.393216] arp_tables: arp_tables: (C) 2002 David S. Miller
644[    1.393275] Initializing XFRM netlink socket
645[    1.393405] NET: Registered protocol family 10
646[    1.393879] Segment Routing with IPv6
647[    1.393905] mip6: Mobile IPv6
648[    1.393911] ip6_tables: (C) 2000-2006 Netfilter Core Team
649[    1.394231] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver
650[    1.394481] NET: Registered protocol family 17
651[    1.394487] NET: Registered protocol family 15
652[    1.394497] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this.
653[    1.394498] Ebtables v2.0 registered
654[    1.394559] l2tp_core: L2TP core driver, V2.0
655[    1.394563] l2tp_ppp: PPPoL2TP kernel driver, V2.0
656[    1.394564] l2tp_ip: L2TP IP encapsulation support (L2TPv3)
657[    1.394570] l2tp_netlink: L2TP netlink interface
658[    1.394580] l2tp_eth: L2TP ethernet pseudowire support (L2TPv3)
659[    1.394582] l2tp_ip6: L2TP IP encapsulation support for IPv6 (L2TPv3)
660[    1.394618] sctp: Hash tables configured (bind 256/256)
661[    1.394951] icnss: Recursive recovery allowed for WLAN
662[    1.394955] icnss: adc_tm_dev probe defer
663[    1.395287] msm-dwc3 4e00000.ssusb: USB core frequency = 133333333
664[    1.395302] msm-dwc3 4e00000.ssusb: setting lpm_to_suspend_delay to zero.
665[    1.395890] msm-dwc3 4e00000.ssusb: DWC3_GSI_EVT_BUF_ALLOC
666[    1.396127] dwc3 4e00000.dwc3: changing max_speed on rev 00000000
667[    1.398444] sps:BAM 0x0000000004f04000 is registered.
668[    1.398831] msm-dwc3 4e00000.ssusb: setting pm-qos-latency to zero.
669[    1.398842] Invalid index Defaulting curr to 0
670[    1.399515] msm-dwc3 4e00000.ssusb: DWC3_GSI_EVT_BUF_FREE
671[    1.400221] QG-K: qg_parse_dt: PMIC subtype 37 Digital major 2
672[    1.400250] QG-K: qg_parse_dt: DT: S2 FIFO length=5 low_vbat_length=2 acc_length=128 acc_interval=100
673[    1.400253] QG-K: qg_parse_dt: DT: OCV timer_expiry =-22min ocv_tol_threshold=-22uV
674[    1.400273] QG-K: qg_parse_dt: DT: cl_min_start_soc=0 cl_max_start_soc=5 cl_min_temp=150 cl_max_temp=450
675[    1.400275] QG-K: qg_parse_dt: DT: vbatt_empty_mv=2800mV vbatt_low_mv=3500mV delta_soc=1 ext-sns=0
676[    1.400285] QG-K: qg_set_wa_flags: wa_flags = 2
677[    1.400316] QG-K: qg_master_hold: Master hold = 1
678[    1.400492] QG-K: qg_master_hold: Master hold = 0
679[    1.412837] QG-K: qg_vbat_thresholds_config: VBAT EMPTY threshold updated to 2800mV temp=222
680[    1.412855] QG-K: qg_vbat_thresholds_config: VBAT LOW threshold updated to 3500mV temp=222
681[    1.414071] get_battery_serialnumber: Battsn = SB18C52857
682[    1.414078] get_profile_by_serialnumber: Default Serial Number SB18C52857
683[    1.414082] get_profile_by_serialnumber: Battery Match Found using qcom,kd40-atl-4000mah
684[    1.414250] QG-K: qg_batterydata_init: QG Battery-profile loaded, '/dev/qg_battery' created!
685[    1.414304] QG-K: qg_sanitize_sdam: SDAM valid
686[    1.414395] QG-K: qg_determine_pon_soc: S7_PON_OCV OCV=4394319
687[    1.414405] QG-K: qg_determine_pon_soc: S3_GOOD_OCV OCV=6377865
688[    1.414414] QG-K: qg_determine_pon_soc: S3_LAST_OCV OCV=6377865
689[    1.414424] QG-K: qg_determine_pon_soc: SDAM_PON_OCV OCV=4394124
690[    1.415511] QG-K: qg_determine_pon_soc: Shutdown: Valid=1 SOC=100 OCV=4391594uV time=77407secs temp=220, time_now=77563secs temp_now=222 S7_soc=100
691[    1.415513] QG-K: qg_determine_pon_soc: Using SHUTDOWN_SOC @ PON
692[    1.416488] QG-K: qg_store_soc_params: SDAM write param 0 value=1
693[    1.416498] QG-K: qg_store_soc_params: SDAM write param 1 value=100
694[    1.416509] QG-K: qg_store_soc_params: SDAM write param 2 value=222
695[    1.416518] QG-K: qg_store_soc_params: SDAM write param 3 value=0
696[    1.416530] QG-K: qg_store_soc_params: SDAM write param 4 value=4391594
697[    1.416542] QG-K: qg_store_soc_params: SDAM write param 5 value=0
698[    1.416554] QG-K: qg_store_soc_params: SDAM write param 6 value=77563
699[    1.416555] QG-K: qg_determine_pon_soc: using SHUTDOWN_SOC @ PON ocv_uv=4391594uV soc=100
700[    1.416713] (NULL device *): hwmon_device_register() is deprecated. Please convert the driver to use hwmon_device_register_with_info().
701[    1.416937] QG-K: qg_request_interrupt: IRQ qg-vbat-low registered wakeable=1
702[    1.417162] QG-K: qg_request_interrupt: IRQ qg-vbat-empty registered wakeable=1
703[    1.417315] QG-K: qg_request_interrupt: IRQ qg-fifo-done registered wakeable=1
704[    1.417468] QG-K: qg_request_interrupt: IRQ qg-good-ocv registered wakeable=1
705[    1.417481] QG-K: qg_retrieve_esr_params: ESR_CHARGE_DELTA SDAM=-5
706[    1.417493] QG-K: qg_retrieve_esr_params: ESR_DISCHARGE_DELTA SDAM=-5
707[    1.417504] QG-K: qg_retrieve_esr_params: ESR_CHARGE_SF SDAM=9561
708[    1.417513] QG-K: qg_retrieve_esr_params: ESR_DISCHARGE_SF SDAM=9561
709[    1.417532] QG-K: qpnp_qg_probe: QG initialized! battery_profile=KD40-ATL-4000mah SOC=100 QG_subtype=3
710[    1.427139] get_battery_serialnumber: Battsn = SB18C52857
711[    1.427146] get_profile_by_serialnumber: Default Serial Number SB18C52857
712[    1.427149] get_profile_by_serialnumber: Battery Match Found using qcom,kd40-atl-4000mah
713[    1.427154] pmi632_charger: jeita_update_work: Couldn't get fcc values for soft JEITA rc=-22
714[    1.434813] power_supply bms: driver failed to report `cc_soc' property: -22
715[    1.470239] pmi632_charger: smblib_request_dpdm: enabling DPDM regulator
716[    1.470823] pmi632_charger: smblib_rerun_apsd: re-running APSD
717[    1.471264] (NULL device *): hwmon_device_register() is deprecated. Please convert the driver to use hwmon_device_register_with_info().
718[    1.471340] pmi632_charger: smblib_usb_plugin_locked: IRQ: usbin-plugin attached
719[    1.471342] pmi632_charger: typec_attach_detach_irq_handler: IRQ: determine-initial-status
720[    1.471389] pmi632_charger: typec_state_change_irq_handler: IRQ: cc-state-change; Type-C NONE detected
721[    1.471399] pmi632_charger: usb_source_change_irq_handler: APSD_STATUS = 0x00
722[    1.471400] pmi632_charger: smblib_handle_hvdcp_detect_done: IRQ: hvdcp-detect-done falling
723[    1.471402] pmi632_charger: smblib_handle_hvdcp_check_timeout: IRQ: smblib_handle_hvdcp_check_timeout falling
724[    1.471403] pmi632_charger: smblib_handle_sdp_enumeration_done: IRQ: sdp-enumeration-done falling
725[    1.471404] pmi632_charger: smblib_handle_slow_plugin_timeout: IRQ: slow-plugin-timeout falling
726[    1.471415] pmi632_charger: usb_source_change_irq_handler: APSD_STATUS = 0x00
727[    1.471416] pmi632_charger: chg_state_change_irq_handler: IRQ: determine-initial-status
728[    1.471445] pmi632_charger: batt_temp_changed_irq_handler: IRQ: determine-initial-status
729[    1.471446] pmi632_charger: wdog_bark_irq_handler: IRQ: determine-initial-status
730[    1.471456] pmi632_charger: typec_or_rid_detection_change_irq_handler: IRQ: determine-initial-status
731[    1.471457] pmi632_charger: wdog_snarl_irq_handler: IRQ: determine-initial-status
732[    1.471973] batt power supply prop 4 not supported
733[    1.472498] pmi632_charger: smblib_run_aicl: re-running AICL
734[    1.476354] pmi632_charger: smblib_run_aicl: re-running AICL
735[    1.476439] SMB5 status - usb:present=1 type=0 batt:present = 1 health = 1 charge = 1
736[    1.476448] QPNP SMB5 probed successfully
737[    1.476826] Error registering TZ zone:-19 for dt_ch:82
738[    1.498022] batt power supply prop 4 not supported
739[    1.504621] Error registering TZ zone:-19 for dt_ch:84
740[    1.504674] icnss: Recursive recovery allowed for WLAN
741[    1.505222] icnss c800000.qcom,icnss: for wcss_msa0 segments only will be dumped.
742[    1.505280] icnss: Platform driver probed successfully
743[    1.505485] msm-dwc3 4e00000.ssusb: USB core frequency = 133333333
744[    1.505502] msm-dwc3 4e00000.ssusb: setting lpm_to_suspend_delay to zero.
745[    1.506223] msm-dwc3 4e00000.ssusb: DWC3_GSI_EVT_BUF_ALLOC
746[    1.506457] dwc3 4e00000.dwc3: changing max_speed on rev 00000000
747[    1.508745] sps:BAM 0x0000000004f04000 is registered.
748[    1.509133] msm-dwc3 4e00000.ssusb: setting pm-qos-latency to zero.
749[    1.509630] i2c_geni 4a84000.i2c: i2c error :-107
750[    1.509707] i2c_geni 4a84000.i2c: i2c error :-107
751[    1.509782] i2c_geni 4a84000.i2c: i2c error :-107
752[    1.509857] i2c_geni 4a84000.i2c: i2c error :-107
753[    1.509931] i2c_geni 4a84000.i2c: i2c error :-107
754[    1.510005] i2c_geni 4a84000.i2c: i2c error :-107
755[    1.510100] i2c_geni 4a84000.i2c: i2c error :-107
756[    1.510174] i2c_geni 4a84000.i2c: i2c error :-107
757[    1.510248] i2c_geni 4a84000.i2c: i2c error :-107
758[    1.510323] i2c_geni 4a84000.i2c: i2c error :-107
759[    1.510872] core_ctl: Creating CPU group 0
760[    1.510874] core_ctl: Init CPU0 state
761[    1.510875] core_ctl: Init CPU1 state
762[    1.510875] core_ctl: Init CPU2 state
763[    1.510876] core_ctl: Init CPU3 state
764[    1.511023] core_ctl: Creating CPU group 4
765[    1.511024] core_ctl: Init CPU4 state
766[    1.511025] core_ctl: Init CPU5 state
767[    1.511025] core_ctl: Init CPU6 state
768[    1.511026] core_ctl: Init CPU7 state
769[    1.511216] registered taskstats version 1
770[    1.511218] Loading compiled-in X.509 certificates
771[    1.512953] Loaded X.509 cert 'Build time autogenerated kernel key: 9dd606ebf61890866bd6ae82766bf11e1603e7ec'
772[    1.512960] page_owner is disabled
773[    1.572766] ADSPRPC: Secure VMID = 22
774[    1.572770] ADSPRPC: Secure VMID = 37
775[    1.573123] iommu: Adding device soc:qcom,msm_fastrpc:qcom,msm_fastrpc_compute_cb1 to group 25
776[    1.573598] iommu: Adding device soc:qcom,msm_fastrpc:qcom,msm_fastrpc_compute_cb2 to group 26
777[    1.573951] iommu: Adding device soc:qcom,msm_fastrpc:qcom,msm_fastrpc_compute_cb3 to group 27
778[    1.574286] iommu: Adding device soc:qcom,msm_fastrpc:qcom,msm_fastrpc_compute_cb4 to group 28
779[    1.574624] iommu: Adding device soc:qcom,msm_fastrpc:qcom,msm_fastrpc_compute_cb5 to group 29
780[    1.574950] iommu: Adding device soc:qcom,msm_fastrpc:qcom,msm_fastrpc_compute_cb6 to group 30
781[    1.575279] iommu: Adding device soc:qcom,msm_fastrpc:qcom,msm_fastrpc_compute_cb9 to group 31
782[    1.576307] iommu: Adding device soc:qcom,msm_fastrpc:qcom,msm_fastrpc_compute_cb10 to group 32
783[    1.577974] iommu: Adding device a340000.slim:qcom,iommu_slim_ctrl_cb to group 33
784[    1.579279] input: gpio-keys as /devices/platform/soc/soc:gpio_keys/input/input1
785[    1.579443] qcom,qpnp-rtc 1c40000.qcom,spmi:qcom,pm6125@0:qcom,pm6125_rtc: setting system clock to 1970-01-01 21:32:43 UTC (77563)
786[    1.580683] lpm_levels: register_cluster_lpm_stats()
787[    1.580773] lpm_levels: register_cluster_lpm_stats()
788[    1.583141] rmnet_ipa3 started initialization
789[    1.583456] RNDIS_IPA module is loaded.
790[    1.586852] ufs_phy_gdsc: disabling
791[    1.586861] usb30_prim_gdsc: disabling
792[    1.586877] dbu1: disabling
793[    1.586892] regulator_proxy_consumer_remove_all: removing regulator proxy consumer requests
794[    1.586935] ALSA device list:
795[    1.586937]   No soundcards found.
796[    1.586964] Warning: unable to open an initial console.
797[    1.587803] Freeing unused kernel memory: 4096K
798[    1.590731] init: init first stage started!
799[    1.590743] init: First stage mount skipped (recovery mode)
800[    1.590870] init: Using Android DT directory /proc/device-tree/firmware/android/
801[    1.591519] init: [libfs_mgr]Unknown file contents encryption mode: ice
802[    1.597476] pmi632_charger: typec_attach_detach_irq_handler: IRQ: typec-attach-detach
803[    1.597478] pmi632_charger: typec_state_change_irq_handler: IRQ: cc-state-change; Type-C SOURCE_DEFAULT detected
804[    1.605759] pmi632_charger: default_irq_handler: IRQ: usbin-collapse
805[    1.636428] init: [libfs_mgr]Returning avb_handle with status: 0
806[    1.636574] init: Loading SELinux policy
807[    1.638734] SELinux: 8192 avtab hash slots, 16624 rules.
808[    1.642298] pmi632_charger: default_irq_handler: IRQ: aicl-done
809[    1.642299] pmi632_charger: default_irq_handler: IRQ: usbin-collapse
810[    1.642410] SELinux: 8192 avtab hash slots, 16624 rules.
811[    1.642416] SELinux:  1 users, 2 roles, 1327 types, 0 bools, 1 sens, 1024 cats
812[    1.642420] SELinux:  93 classes, 16624 rules
813[    1.643746] SELinux:  Class process2 not defined in policy.
814[    1.643995] SELinux:  Class infiniband_pkey not defined in policy.
815[    1.643996] SELinux:  Class infiniband_endport not defined in policy.
816[    1.644000] SELinux: the above unknown classes and permissions will be denied
817[    1.644014] SELinux:  policy capability network_peer_controls=1
818[    1.644015] SELinux:  policy capability open_perms=1
819[    1.644016] SELinux:  policy capability extended_socket_class=1
820[    1.644017] SELinux:  policy capability always_check_network=0
821[    1.644018] SELinux:  policy capability cgroup_seclabel=0
822[    1.644019] SELinux:  policy capability nnp_nosuid_transition=0
823[    1.644044] SELinux:  Completing initialization.
824[    1.644045] SELinux:  Setting up existing superblocks.
825[    1.685809] pmi632_charger: default_irq_handler: IRQ: usbin-collapse
826[    1.688334] audit: type=1403 audit(77563.606:2): policy loaded auid=4294967295 ses=4294967295
827[    1.688439] selinux: SELinux: Loaded policy from /sepolicy
828[    1.688439]
829[    1.689722] selinux: SELinux: Loaded file_contexts
830[    1.689722]
831[    1.691651] init: init second stage started!
832[    1.695654] init: Using Android DT directory /proc/device-tree/firmware/android/
833[    1.697324] selinux: SELinux: Loaded file_contexts
834[    1.697324]
835[    1.697332] init: Running restorecon...
836[    1.700916] init: waitid failed: No child processes
837[    1.700961] init: Couldn't load property file '/system/etc/prop.default': open() failed: No such file or directory: No such file or directory
838[    1.701487] init: Unable to set property 'ro.build.version.release' to '9' in property file '/prop.default': Read-only property was already set
839[    1.701503] init: Unable to set property 'ro.build.version.security_patch' to '2099-12-31' in property file '/prop.default': Read-only property was already set
840[    1.701661] init: Couldn't load property file '/product/build.prop': open() failed: No such file or directory: No such file or directory
841[    1.701676] init: Couldn't load property file '/odm/default.prop': open() failed: No such file or directory: No such file or directory
842[    1.701687] init: Couldn't load property file '/vendor/default.prop': open() failed: No such file or directory: No such file or directory
843[    1.701893] init: Created socket '/dev/socket/property_service', mode 666, user 0, group 0
844[    1.702479] init: Forked subcontext for 'u:r:vendor_init:s0' with pid 421
845[    1.702846] init: Forked subcontext for 'u:r:vendor_init:s0' with pid 422
846[    1.702903] init: Parsing file /init.rc...
847[    1.702961] init: Added '/init.recovery.logd.rc' to import list
848[    1.702968] init: Added '/init.recovery.ldconfig.rc' to import list
849[    1.702972] init: Added '/init.recovery.mksh.rc' to import list
850[    1.702976] init: Added '/init.recovery.usb.rc' to import list
851[    1.702981] init: Added '/init.recovery.service.rc' to import list
852[    1.702989] init: Added '/init.recovery.vold_decrypt.rc' to import list
853[    1.702998] init: Added '/init.recovery.qcom.rc' to import list
854[    1.703089] init: /init.rc: 15: Invalid keyword 'setcon'
855[    1.703191] init: /init.rc: 64: Invalid keyword 'load_all_props'
856[    1.703227] init: /init.rc: 102: Invalid keyword 'powerctl'
857[    1.703281] init: Parsing file /init.recovery.logd.rc...
858[    1.703328] init: Parsing file /init.recovery.ldconfig.rc...
859[    1.703382] init: Parsing file /init.recovery.mksh.rc...
860[    1.703400] init: Parsing file /init.recovery.usb.rc...
861[    1.703560] init: Parsing file /init.recovery.service.rc...
862[    1.703587] init: Parsing file /init.recovery.vold_decrypt.rc...
863[    1.703601] init: Unable to read config file '/init.recovery.vold_decrypt.rc': open() failed: No such file or directory
864[    1.703611] init: /init.rc: 6: Could not import file '/init.recovery.vold_decrypt.rc': No such file or directory
865[    1.703620] init: Parsing file /init.recovery.qcom.rc...
866[    1.703766] init: /init.recovery.qcom.rc: 112: ignored duplicate definition of service 'logd'
867[    1.703826] init: Parsing file /system/etc/init...
868[    1.703838] init: Unable to read config file '/system/etc/init': open() failed: No such file or directory
869[    1.703853] init: Parsing file /product/etc/init...
870[    1.703864] init: Unable to read config file '/product/etc/init': open() failed: No such file or directory
871[    1.703875] init: Parsing file /odm/etc/init...
872[    1.703885] init: Unable to read config file '/odm/etc/init': open() failed: No such file or directory
873[    1.703898] init: Parsing file /vendor/etc/init...
874[    1.703907] init: Unable to read config file '/vendor/etc/init': open() failed: No such file or directory
875[    1.703943] init: processing action (early-init) from (/init.rc:9)
876[    1.704319] audit: type=1400 audit(77563.623:3): avc:  denied  { setcheckreqprot } for  pid=1 comm="init" scontext=u:r:init:s0 tcontext=u:object_r:kernel:s0 tclass=security permissive=1
877[    1.704410] init: starting service 'ueventd'...
878[    1.704899] audit: type=1400 audit(77563.623:4): avc:  denied  { dac_read_search } for  pid=1 comm="init" capability=2  scontext=u:r:init:s0 tcontext=u:r:init:s0 tclass=capability permissive=1
879[    1.704928] audit: type=1400 audit(77563.623:5): avc:  denied  { create } for  pid=1 comm="init" name="cgroup.procs" scontext=u:r:init:s0 tcontext=u:object_r:rootfs:s0 tclass=file permissive=1
880[    1.704954] audit: type=1400 audit(77563.623:6): avc:  denied  { write } for  pid=1 comm="init" path="/acct/uid_0/pid_423/cgroup.procs" dev="rootfs" ino=18360 scontext=u:r:init:s0 tcontext=u:object_r:rootfs:s0 tclass=file permissive=1
881[    1.705049] init: processing action (wait_for_coldboot_done) from (<Builtin Action>:0)
882[    1.707633] pmi632_charger: default_irq_handler: IRQ: usbin-collapse
883[    1.707653] audit: type=1400 audit(77563.626:8): avc:  denied  { map } for  pid=421 comm="init" path="/plat_file_contexts" dev="rootfs" ino=11308 scontext=u:r:vendor_init:s0 tcontext=u:object_r:file_contexts_file:s0 tclass=file permissive=1
884[    1.707660] audit: type=1400 audit(77563.626:7): avc:  denied  { map } for  pid=422 comm="init" path="/plat_file_contexts" dev="rootfs" ino=11308 scontext=u:r:vendor_init:s0 tcontext=u:object_r:file_contexts_file:s0 tclass=file permissive=1
885[    1.707985] ueventd: ueventd started!
886[    1.709647] selinux: SELinux: Loaded file_contexts
887[    1.709647]
888[    1.709694] ueventd: Parsing file /ueventd.rc...
889[    1.710305] ueventd: Parsing file /vendor/ueventd.rc...
890[    1.710330] ueventd: Unable to read config file '/vendor/ueventd.rc': open() failed: No such file or directory
891[    1.710352] ueventd: Parsing file /odm/ueventd.rc...
892[    1.710370] ueventd: Unable to read config file '/odm/ueventd.rc': open() failed: No such file or directory
893[    1.710444] ueventd: Parsing file /ueventd.qcom.rc...
894[    1.712372] ueventd: [libfs_mgr]Unknown file contents encryption mode: ice
895[    1.748605] pmi632_charger: chg_state_change_irq_handler: IRQ: chg-state-change
896[    1.748656] batt power supply prop 4 not supported
897[    1.796210] power_supply bms: driver failed to report `cc_soc' property: -22
898[    1.796220] synth uevent: /devices/platform/soc/1c40000.qcom,spmi/spmi-0/spmi0-02/1c40000.qcom,spmi:qcom,pmi632@2:qpnp,qg/power_supply/bms: failed to send uevent
899[    1.796222] power_supply bms: uevent: failed to send synthetic uevent
900[    1.866658] ueventd: Coldboot took 0.153 seconds
901[    1.867160] init: wait for '/dev/.coldboot_done' took 162ms
902[    1.867246] init: Command 'wait_for_coldboot_done' action=wait_for_coldboot_done (<Builtin Action>:0) took 162ms and succeeded
903[    1.867275] init: processing action (MixHwrngIntoLinuxRng) from (<Builtin Action>:0)
904[    1.871733] init: Mixed 512 bytes from /dev/hw_random into /dev/urandom
905[    1.871777] init: processing action (SetMmapRndBits) from (<Builtin Action>:0)
906[    1.872272] init: processing action (SetKptrRestrict) from (<Builtin Action>:0)
907[    1.872427] init: processing action (keychord_init) from (<Builtin Action>:0)
908[    1.872450] init: processing action (console_init) from (<Builtin Action>:0)
909[    1.872483] init: processing action (init) from (/init.rc:26)
910[    1.873870] audit: type=1400 audit(77563.793:9): avc:  denied  { setattr } for  pid=1 comm="init" name="system" dev="rootfs" ino=11721 scontext=u:r:init:s0 tcontext=u:object_r:rootfs:s0 tclass=lnk_file permissive=1
911[    1.874636] init: processing action (init) from (/init.recovery.mksh.rc:1)
912[    1.874658] init: processing action (init) from (/init.recovery.qcom.rc:142)
913[    1.874679] init: starting service 'logd'...
914[    1.875624] init: starting service 'hwservicemanager'...
915[    1.876141] init: Created socket '/dev/socket/logd', mode 666, user 1036, group 1036
916[    1.876523] init: Created socket '/dev/socket/logdr', mode 666, user 1036, group 1036
917[    1.876532] init: starting service 'boot-1-0'...
918[    1.877130] init: Created socket '/dev/socket/logdw', mode 222, user 1036, group 1036
919[    1.877441] audit: type=1400 audit(77563.796:10): avc:  denied  { entrypoint } for  pid=432 comm="init" path="/sbin/logd" dev="rootfs" ino=11534 scontext=u:r:logd:s0 tcontext=u:object_r:rootfs:s0 tclass=file permissive=1
920[    1.877628] init: starting service 'prepdecrypt'...
921[    1.878648] init: starting service 'time_daemon'...
922[    1.879717] init: processing action (StartBoringSslSelfTest) from (<Builtin Action>:0)
923[    1.880505] init: processing action (MixHwrngIntoLinuxRng) from (<Builtin Action>:0)
924[    1.885095] init: Mixed 512 bytes from /dev/hw_random into /dev/urandom
925[    1.885167] init: processing action (late-init) from (/init.rc:78)
926[    1.885232] init: processing action (queue_property_triggers) from (<Builtin Action>:0)
927[    1.885270] init: processing action (early-fs) from (/init.recovery.qcom.rc:43)
928[    1.885310] init: Command 'start vold' action=early-fs (/init.recovery.qcom.rc:44) took 0ms and failed: service vold not found
929[    1.885328] init: processing action (fs) from (/init.rc:49)
930[    1.886552] init: Untracked pid 437 exited with status 0
931[    1.890791] logd: failed to set AID_LOGD uid
932[    1.890887] logd: Cannot read /system/etc/event-log-tags
933[    1.891617] logd.auditd: start
934[    1.891647] logd.klogd: 1891628572
935[    1.897311] init: Command 'mount functionfs adb /dev/usb-ffs/adb uid=2000,gid=2000' action=fs (/init.rc:53) took 10ms and failed: mount() failed: No such device
936[    1.897344] init: processing action (fs) from (/init.recovery.ldconfig.rc:1)
937[    1.897371] init: processing action (fs) from (/init.recovery.qcom.rc:28)
938[    1.897419] init: wait for '/dev/block/platform/soc/4744000.sdhci' took 0ms
939[    1.898698] init: Keyring created with id 546622355 in process 1
940[    1.898921] init: starting service 'load_modules'...
941[    1.899923] init: processing action (load_all_props_action) from (/init.recovery.logd.rc:1)
942[    1.899964] init: processing action (load_system_props_action) from (/init.rc:67)
943[    1.900064] init: Couldn't load property file '/system/build.prop': open() failed: No such file or directory: No such file or directory
944[    1.900094] init: Couldn't load property file '/odm/build.prop': open() failed: No such file or directory: No such file or directory
945[    1.900118] init: Couldn't load property file '/vendor/build.prop': open() failed: No such file or directory: No such file or directory
946[    1.900141] init: Couldn't load property file '/factory/factory.prop': open() failed: No such file or directory: No such file or directory
947[    1.900350] init: [libfs_mgr]Unknown file contents encryption mode: ice
948[    1.901643] init: /recovery not specified in fstab
949[    1.901726] init: processing action (load_persist_props_action) from (/init.rc:71)
950[    1.901774] init: Couldn't load property file '/data/local.prop': open() failed: No such file or directory: No such file or directory
951[    1.901816] init: Could not load single persistent property file, trying legacy directory: Unable to read persistent property file: open() failed: No such file or directory
952[    1.901847] init: Unable to load legacy persistent properties: Unable to open persistent property directory "/data/property": No such file or directory
953[    1.902147] init: processing action (load_persist_props_action) from (/init.recovery.logd.rc:4)
954[    1.902182] init: processing action (firmware_mounts_complete) from (/init.rc:74)
955[    1.902236] init: processing action (boot) from (/init.rc:55)
956[    1.903656] init: starting service 'set_permissive'...
957[    1.904866] init: starting service 'recovery'...
958[    1.905797] init: starting service 'ldconfigtxt'...
959[    1.907205] selinux: avc:  denied  { set } for property=hwservicemanager.ready pid=433 uid=0 gid=0 scontext=u:r:recovery:s0 tcontext=u:object_r:hwservicemanager_prop:s0 tclass=property_service permissive=1
960[    1.907205]
961[    1.907401] init: processing action (boot) from (/init.recovery.usb.rc:28)
962[    1.911610] type=1400 audit(77563.810:16): avc: denied { read } for pid=436 comm="time_daemon" name="devices" dev="sysfs" ino=17745 scontext=u:r:recovery:s0 tcontext=u:object_r:sysfs:s0 tclass=dir permissive=1
963[    1.911674] type=1400 audit(77563.810:16): avc: denied { read } for pid=436 comm="time_daemon" name="devices" dev="sysfs" ino=17745 scontext=u:r:recovery:s0 tcontext=u:object_r:sysfs:s0 tclass=dir permissive=1
964[    1.911680] type=1400 audit(77563.810:17): avc: denied { open } for pid=436 comm="time_daemon" path="/sys/bus/msm_subsys/devices" dev="sysfs" ino=17745 scontext=u:r:recovery:s0 tcontext=u:object_r:sysfs:s0 tclass=dir permissive=1
965[    1.912635] Mass Storage Function, version: 2009/09/11
966[    1.912641] LUN: removable file: (no medium)
967[    1.914677] type=1400 audit(77563.810:17): avc: denied { open } for pid=436 comm="time_daemon" path="/sys/bus/msm_subsys/devices" dev="sysfs" ino=17745 scontext=u:r:recovery:s0 tcontext=u:object_r:sysfs:s0 tclass=dir permissive=1
968[    1.914695] type=1400 audit(77563.810:18): avc: denied { read } for pid=436 comm="time_daemon" name="name" dev="sysfs" ino=35807 scontext=u:r:recovery:s0 tcontext=u:object_r:sysfs:s0 tclass=file permissive=1
969[    1.914760] type=1400 audit(77563.810:18): avc: denied { read } for pid=436 comm="time_daemon" name="name" dev="sysfs" ino=35807 scontext=u:r:recovery:s0 tcontext=u:object_r:sysfs:s0 tclass=file permissive=1
970[    1.914771] type=1400 audit(77563.810:19): avc: denied { open } for pid=436 comm="time_daemon" path="/sys/devices/platform/soc/5ae0000.qcom,venus/subsys4/name" dev="sysfs" ino=35807 scontext=u:r:recovery:s0 tcontext=u:object_r:sysfs:s0 tclass=file permissive=1
971[    1.914826] type=1400 audit(77563.810:19): avc: denied { open } for pid=436 comm="time_daemon" path="/sys/devices/platform/soc/5ae0000.qcom,venus/subsys4/name" dev="sysfs" ino=35807 scontext=u:r:recovery:s0 tcontext=u:object_r:sysfs:s0 tclass=file permissive=1
972[    1.914836] type=1400 audit(77563.810:20): avc: denied { create } for pid=436 comm="time_daemon" scontext=u:r:recovery:s0 tcontext=u:r:recovery:s0 tclass=qipcrtr_socket permissive=1
973[    1.914905] type=1400 audit(77563.810:20): avc: denied { create } for pid=436 comm="time_daemon" scontext=u:r:recovery:s0 tcontext=u:r:recovery:s0 tclass=qipcrtr_socket permissive=1
974[    1.914916] type=1400 audit(77563.820:21): avc: denied { dac_read_search } for pid=436 comm="time_daemon" capability=2 scontext=u:r:recovery:s0 tcontext=u:r:recovery:s0 tclass=capability permissive=1
975[    1.914976] type=1400 audit(77563.820:21): avc: denied { dac_read_search } for pid=436 comm="time_daemon" capability=2 scontext=u:r:recovery:s0 tcontext=u:r:recovery:s0 tclass=capability permissive=1
976[    1.914985] type=1400 audit(77563.820:22): avc: denied { read } for pid=436 comm="time_daemon" name="rtc0" dev="tmpfs" ino=18424 scontext=u:r:recovery:s0 tcontext=u:object_r:rtc_device:s0 tclass=chr_file permissive=1
977[    1.915038] type=1400 audit(77563.820:22): avc: denied { read } for pid=436 comm="time_daemon" name="rtc0" dev="tmpfs" ino=18424 scontext=u:r:recovery:s0 tcontext=u:object_r:rtc_device:s0 tclass=chr_file permissive=1
978[    1.915048] type=1400 audit(77563.820:23): avc: denied { open } for pid=436 comm="time_daemon" path="/dev/rtc0" dev="tmpfs" ino=18424 scontext=u:r:recovery:s0 tcontext=u:object_r:rtc_device:s0 tclass=chr_file permissive=1
979[    1.915101] type=1400 audit(77563.820:23): avc: denied { open } for pid=436 comm="time_daemon" path="/dev/rtc0" dev="tmpfs" ino=18424 scontext=u:r:recovery:s0 tcontext=u:object_r:rtc_device:s0 tclass=chr_file permissive=1
980[    1.915111] type=1400 audit(77563.820:24): avc: denied { ioctl } for pid=436 comm="time_daemon" path="/dev/rtc0" dev="tmpfs" ino=18424 ioctlcmd=0x7009 scontext=u:r:recovery:s0 tcontext=u:object_r:rtc_device:s0 tclass=chr_file permissive=1
981[    1.929106] init: Service 'set_permissive' (pid 445) exited with status 0
982[    1.929259] init: Service 'ldconfigtxt' (pid 448) exited with status 0
983[    1.929293] EXT4-fs (mmcblk0p76): mounted filesystem without journal. Opts: (null)
984[    1.930796] file system registered
985[    1.931658] f_cdev_alloc: port_name:at_usb0 (0000000000000000) portno:(0)
986[    1.940231] f_cdev_alloc: port_name:at_usb1 (0000000000000000) portno:(1)
987[    1.940705] f_cdev_alloc: port_name:at_usb2 (0000000000000000) portno:(2)
988[    1.950913] init: processing action (boot) from (/init.recovery.qcom.rc:136)
989[    1.951501] init: processing action (enable_property_trigger) from (<Builtin Action>:0)
990[    1.951558] init: processing action (ro.debuggable=1) from (/init.rc:114)
991[    1.951726] init: processing action (sys.usb.config=adb) from (/init.recovery.usb.rc:110)
992[    1.951748] init: starting service 'adbd'...
993[    1.952765] init: processing action (crypto.ready=1) from (/init.recovery.qcom.rc:156)
994[    1.952805] init: starting service 'sbinqseecomd'...
995[    1.953324] init: Created socket '/dev/socket/adbd', mode 660, user 1000, group 1000
996[    1.953942] init: processing action (service.adb.root=1) from (/init.rc:120)
997[    1.954447] init: Command 'write /sys/class/android_usb/android0/enable 0' action=service.adb.root=1 (/init.rc:121) took 0ms and failed: Unable to write to file '/sys/class/android_usb/android0/enable': open() failed: Permission denied
998[    1.954483] init: Sending signal 9 to service 'adbd' (pid 475) process group...
999[    1.960068] libprocessgroup: Successfully killed process cgroup uid 0 pid 475 in 5ms
1000[    1.960387] init: Service 'adbd' (pid 475) received signal 9
1001[    1.960834] init: Command 'write /sys/class/android_usb/android0/enable 1' action=service.adb.root=1 (/init.rc:123) took 0ms and failed: Unable to write to file '/sys/class/android_usb/android0/enable': open() failed: Permission denied
1002[    1.963553] EXT4-fs (mmcblk0p78): mounted filesystem without journal. Opts: (null)
1003[    1.970299] selinux: avc:  denied  { set } for property=twrp.crash_counter pid=447 uid=0 gid=0 scontext=u:r:recovery:s0 tcontext=u:object_r:default_prop:s0 tclass=property_service permissive=1
1004[    1.970299]
1005[    1.983805] msm-dsi-display:[dsi_display_prepare] panel_name=mipi_mot_vid_ds_1080p_630 ctrl-index=0
1006[    1.995895] selinux: avc:  denied  { set } for property=vendor.sys.listeners.registered pid=476 uid=1000 gid=1000 scontext=u:r:recovery:s0 tcontext=u:object_r:vendor_default_prop:s0 tclass=property_service permissive=1
1007[    1.995895]
1008[    1.996120] init: processing action (vendor.sys.listeners.registered=true) from (/init.recovery.qcom.rc:159)
1009[    1.996174] init: starting service 'keymaster-4-0'...
1010[    1.997765] init: starting service 'gatekeeper-1-0'...
1011[    1.999220] init: starting service 'servicemanager'...
1012[    2.000466] init: Sending signal 9 to service 'time_daemon' (pid 436) process group...
1013[    2.006219] libprocessgroup: Successfully killed process cgroup uid 0 pid 436 in 5ms
1014[    2.006471] init: Service 'time_daemon' (pid 436) received signal 9
1015[    2.036614] init: Unable to set property 'ro.build.version.release' to '' from uid:0 gid:0 pid:500: Read-only property was already set
1016[    2.049933] init: Unable to set property 'ro.build.version.security_patch' to '' from uid:0 gid:0 pid:502: Read-only property was already set
1017[    2.059126] msm-dsi-display:[dsi_display_disable] dsi_display_disable(DSI-1)+
1018[    2.059148] msm-dsi-panel:[dsi_panel_disable:4919] (mipi_mot_vid_ds_1080p_630)+
1019[    2.076472] pmi632_charger: default_irq_handler: IRQ: aicl-done
1020[    2.114431] init: processing action (crypto.ready=1) from (/init.recovery.qcom.rc:156)
1021[    2.116099] init: Service 'prepdecrypt' (pid 435) exited with status 0
1022[    2.125275] EXT4-fs (mmcblk0p76): warning: mounting unchecked fs, running e2fsck is recommended
1023[    2.127453] EXT4-fs (mmcblk0p76): mounted filesystem without journal. Opts: (null)
1024[    2.206527] exfat: loading out-of-tree module taints kernel.
1025[    2.209422] msm-dsi-panel:[dsi_panel_disable:4930] (mipi_mot_vid_ds_1080p_630) DSI_CMD_SET_OFF+
1026[    2.209519] exFAT: Version 1.2.9
1027[    2.209918] msm-dsi-panel:[dsi_panel_power_off:639] (mipi_mot_vid_ds_1080p_630)+
1028[    2.224933] msm-dsi-display:[dsi_display_prepare] panel_name=mipi_mot_vid_ds_1080p_630 ctrl-index=0
1029[    2.224976] dsi-ctrl:[_dsi_ctrl_setup_isr] [DSI_0] IRQ 223 registered
1030[    2.227162] msm-dsi-panel:[dsi_panel_power_on:568] (mipi_mot_vid_ds_1080p_630)+
1031[    2.238339] utags (utags_probe): Done [config]
1032[    2.238467] utags (utags_dt_init): backup storage path not provided
1033[    2.238933] utags (utags_probe): Done [hw]
1034[    2.258750] moto sensor init!
1035[    2.259032] sensor init success!
1036[    2.278533] mmi_annotate soc:mmi_annotate: size 800
1037[    2.278539] mmi_annotate soc:mmi_annotate: addr aefa1800
1038[    2.278624] mmi_annotate soc:mmi_annotate: mem-size 20000
1039[    2.304401] mmi_info: no symbol version for mmi_annotate
1040[    2.305157] mmi_storage_info :EMMC: 64GB MICRON S0J9K8 FV=
1041[    2.305388] mmi_unit_info (SMEM) for modem: version = 0x03, device = 'doha', radio = 0x0, radio_str = 'LATAM', system_rev = 0xc000, system_serial = 0x00000000b3d81a88, machine = '', barcode = 'ZY22754V4Z', baseband = '', carrier = 'retla', pu_reason = 0x00100000
1042[    2.305544] BOOT_SEQ: 256
1043[    2.317281] msm-dsi-panel:[dsi_panel_power_on:615] [mipi_mot_vid_ds_1080p_630] dsi panel power on ok!
1044[    2.317298] msm-dsi-panel:[dsi_panel_enable:4816] (mipi_mot_vid_ds_1080p_630)+
1045[    2.327775] tzlog_dump soc:tzlog_dump: tzlog_dump_size 30000
1046[    2.327781] tzlog_dump soc:tzlog_dump: tzlog_dump_addr aefa2000
1047[    2.348138] (NULL device *): hwmon_device_register() is deprecated. Please convert the driver to use hwmon_device_register_with_info().
1048[    2.348718] (NULL device *): hwmon_device_register() is deprecated. Please convert the driver to use hwmon_device_register_with_info().
1049[    2.380848] init: Service 'load_modules' (pid 443) exited with status 0
1050[    2.418248] msm-dsi-panel:[dsi_panel_enable:4849] -: no_panel_on_read_support is set
1051[    2.510155] EXT4-fs (mmcblk0p46): mounted filesystem with ordered data mode. Opts:
1052[    2.510601] SELinux:  Context u:object_r:persist_file:s0 is not valid (left unmapped).
1053[    2.511511] SELinux:  Context u:object_r:persist_time_file:s0 is not valid (left unmapped).
1054[    2.527311] pmi632_charger: usb_source_change_irq_handler: APSD_STATUS = 0x01
1055[    2.527335] pmi632_charger: smblib_update_usb_type: APSD=SDP PD=0
1056[    2.527384] msm-dwc3 4e00000.ssusb: vbus:1 event received
1057[    2.527427] msm-dwc3 4e00000.ssusb: dwc3_resume_work: dwc3 resume work
1058[    2.527440] msm-dwc3 4e00000.ssusb: XCVR: ID set
1059[    2.527445] msm-dwc3 4e00000.ssusb: XCVR: BSV set
1060[    2.527450] msm-dwc3 4e00000.ssusb: XCVR: SUSP clear
1061[    2.527462] pmi632_charger: smblib_handle_apsd_done: IRQ: apsd-done rising; SDP detected
1062[    2.527464] pmi632_charger: smblib_handle_hvdcp_detect_done: IRQ: hvdcp-detect-done falling
1063[    2.527466] pmi632_charger: smblib_handle_hvdcp_check_timeout: IRQ: smblib_handle_hvdcp_check_timeout falling
1064[    2.527469] pmi632_charger: smblib_handle_sdp_enumeration_done: IRQ: sdp-enumeration-done falling
1065[    2.527471] pmi632_charger: smblib_handle_slow_plugin_timeout: IRQ: slow-plugin-timeout falling
1066[    2.527481] msm-dwc3 4e00000.ssusb: undefined state
1067[    2.527492] msm-dwc3 4e00000.ssusb: b_sess_vld
1068[    2.527496] pmi632_charger: usb_source_change_irq_handler: APSD_STATUS = 0x01
1069[    2.527508] msm-dwc3 4e00000.ssusb: DWC3-msm runtime resume
1070[    2.527516] msm-dwc3 4e00000.ssusb: dwc3_msm_resume: exiting lpm
1071[    2.528924] msm-dwc3 4e00000.ssusb: dwc3_msm_resume: exit power collapse
1072[    2.530462] msm-dwc3 4e00000.ssusb: dwc3_msm_resume: exit power collapse
1073[    2.530902] msm-dwc3 4e00000.ssusb: DWC3_CONTROLLER_POST_RESET_EVENT received
1074[    2.530981] msm-dwc3 4e00000.ssusb: DWC3 exited from low power mode
1075[    2.530987] msm-dwc3 4e00000.ssusb: dwc3_pwr_event_handler irq_stat=0
1076[    2.531006] msm-dwc3 4e00000.ssusb: dwc3_otg_start_peripheral: turn on gadget dwc3-gadget
1077[    2.532267] msm-dwc3 4e00000.ssusb: peripheral state
1078[    2.595924] F2FS-fs (mmcblk0p80): Mounted with checkpoint version = 4628d9b2
1079[    2.710137] F2FS-fs (mmcblk0p80): Mounted with checkpoint version = 4628d9b4
1080[    2.720146] pmi632_charger: smblib_icl_change_work: icl_settled=100000
1081[    2.741397] msm-dwc3 4e00000.ssusb: msm_dwc3_pwr_irq received
1082[    2.741415] msm-dwc3 4e00000.ssusb: dwc3_pwr_event_handler irq_stat=4
1083[    2.743518] selinux: avc:  denied  { set } for property=ctl.interface_start$android.hardware.keymaster@3.0::IKeymasterDevice/default pid=433 uid=0 gid=0 scontext=u:r:recovery:s0 tcontext=u:object_r:ctl_interface_start_prop:s0 tclass=property_service permissive=1
1084[    2.743518]
1085[    2.743694] init: Received control message 'interface_start' for 'android.hardware.keymaster@3.0::IKeymasterDevice/default' from pid: 433 (/sbin/hwservicemanager)
1086[    2.743713] init: Could not find service hosting interface android.hardware.keymaster@3.0::IKeymasterDevice/default
1087[    2.789263] init: Received control message 'interface_start' for 'android.hardware.keymaster@3.0::IKeymasterDevice/default' from pid: 433 (/sbin/hwservicemanager)
1088[    2.789291] init: Could not find service hosting interface android.hardware.keymaster@3.0::IKeymasterDevice/default
1089[    2.812233] selinux: avc:  denied  { set } for property=ro.crypto.state pid=447 uid=0 gid=0 scontext=u:r:recovery:s0 tcontext=u:object_r:vold_prop:s0 tclass=property_service permissive=1
1090[    2.812233]
1091[    2.812291] init: Unable to set property 'ro.crypto.state' to 'encrypted' from uid:0 gid:0 pid:447: Read-only property was already set
1092[    2.823973] EXT4-fs (mmcblk0p78): mounted filesystem without journal. Opts:
1093[    2.833682] EXT4-fs (mmcblk0p78): mounted filesystem without journal. Opts:
1094[    2.845940] EXT4-fs (mmcblk0p76): mounted filesystem without journal. Opts:
1095[    2.960260] type=1400 audit(77563.820:24): avc: denied { ioctl } for pid=436 comm="time_daemon" path="/dev/rtc0" dev="tmpfs" ino=18424 ioctlcmd=0x7009 scontext=u:r:recovery:s0 tcontext=u:object_r:rtc_device:s0 tclass=chr_file permissive=1
1096[    2.960279] type=1400 audit(1582755063.336:224): avc: denied { getattr } for pid=447 comm="recovery" path="/data/misc/profman" dev="mmcblk0p80" ino=58 scontext=u:r:recovery:s0 tcontext=u:object_r:profman_dump_data_file:s0 tclass=dir permissive=1
1097[    2.960383] type=1400 audit(1582755063.336:224): avc: denied { getattr } for pid=447 comm="recovery" path="/data/misc/profman" dev="mmcblk0p80" ino=58 scontext=u:r:recovery:s0 tcontext=u:object_r:profman_dump_data_file:s0 tclass=dir permissive=1
1098[    2.960394] type=1400 audit(1582755063.336:225): avc: denied { read } for pid=447 comm="recovery" name="profman" dev="mmcblk0p80" ino=58 scontext=u:r:recovery:s0 tcontext=u:object_r:profman_dump_data_file:s0 tclass=dir permissive=1
1099[    2.960445] type=1400 audit(1582755063.336:225): avc: denied { read } for pid=447 comm="recovery" name="profman" dev="mmcblk0p80" ino=58 scontext=u:r:recovery:s0 tcontext=u:object_r:profman_dump_data_file:s0 tclass=dir permissive=1
1100[    2.960455] type=1400 audit(1582755063.336:226): avc: denied { open } for pid=447 comm="recovery" path="/data/misc/profman" dev="mmcblk0p80" ino=58 scontext=u:r:recovery:s0 tcontext=u:object_r:profman_dump_data_file:s0 tclass=dir permissive=1
1101[    2.960504] type=1400 audit(1582755063.336:226): avc: denied { open } for pid=447 comm="recovery" path="/data/misc/profman" dev="mmcblk0p80" ino=58 scontext=u:r:recovery:s0 tcontext=u:object_r:profman_dump_data_file:s0 tclass=dir permissive=1
1102[    2.960513] type=1400 audit(1582755063.336:227): avc: denied { search } for pid=447 comm="recovery" name="profman" dev="mmcblk0p80" ino=58 scontext=u:r:recovery:s0 tcontext=u:object_r:profman_dump_data_file:s0 tclass=dir permissive=1
1103[    2.960561] type=1400 audit(1582755063.336:227): avc: denied { search } for pid=447 comm="recovery" name="profman" dev="mmcblk0p80" ino=58 scontext=u:r:recovery:s0 tcontext=u:object_r:profman_dump_data_file:s0 tclass=dir permissive=1
1104[    2.960570] type=1400 audit(1582755063.336:228): avc: denied { getattr } for pid=447 comm="recovery" path="/data/misc/adb" dev="mmcblk0p80" ino=133 scontext=u:r:recovery:s0 tcontext=u:object_r:adb_keys_file:s0 tclass=dir permissive=1
1105[    2.962399] SELinux:  Context u:object_r:elabel_data_file:s0 is not valid (left unmapped).
1106[    2.962502] SELinux:  Context u:object_r:iplog_data_file:s0 is not valid (left unmapped).
1107[    2.965327] SELinux:  Context u:object_r:vendor_tombstone_data_file:s0 is not valid (left unmapped).
1108[    2.967479] SELinux:  Context u:object_r:cutback_data_file:s0 is not valid (left unmapped).
1109[    2.967786] SELinux:  Context u:object_r:cutback_socket:s0 is not valid (left unmapped).
1110[    2.967909] SELinux:  Context u:object_r:imager_data_file:s0 is not valid (left unmapped).
1111[    2.968263] SELinux:  Context u:object_r:ramdump_vendor_data_file:s0 is not valid (left unmapped).
1112[    2.968360] SELinux:  Context u:object_r:display_vendor_data_file:s0 is not valid (left unmapped).
1113[    2.968458] SELinux:  Context u:object_r:lm_data_file:s0 is not valid (left unmapped).
1114[    2.970259] SELinux:  Context u:object_r:vendor_media_data_file:s0 is not valid (left unmapped).
1115[    2.970722] SELinux:  Context u:object_r:vendor_qdma_data_file:s0 is not valid (left unmapped).
1116[    2.970910] SELinux:  Context u:object_r:data_tzstorage_file:s0 is not valid (left unmapped).
1117[    2.971012] SELinux:  Context u:object_r:data_qtee_file:s0 is not valid (left unmapped).
1118[    2.971114] SELinux:  Context u:object_r:vendor_camera_data_file:s0 is not valid (left unmapped).
1119[    2.971517] SELinux:  Context u:object_r:vendor_ramdump_data_file:s0 is not valid (left unmapped).
1120[    2.971917] SELinux:  Context u:object_r:vendor_bt_data_file:s0 is not valid (left unmapped).
1121[    2.972280] SELinux:  Context u:object_r:wifi_vendor_data_file:s0 is not valid (left unmapped).
1122[    2.972586] SELinux:  Context u:object_r:wifi_vendor_wpa_socket:s0 is not valid (left unmapped).
1123[    2.973282] SELinux:  Context u:object_r:wigig_hostapd_socket:s0 is not valid (left unmapped).
1124[    2.974638] SELinux:  Context u:object_r:port_bridge_data_file:s0 is not valid (left unmapped).
1125[    2.974767] SELinux:  Context u:object_r:netmgrd_data_file:s0 is not valid (left unmapped).
1126[    2.975084] SELinux:  Context u:object_r:ipa_vendor_data_file:s0 is not valid (left unmapped).
1127[    2.975437] SELinux:  Context u:object_r:vendor_qti_data_file:s0 is not valid (left unmapped).
1128[    2.975540] SELinux:  Context u:object_r:cnd_data_file:s0 is not valid (left unmapped).
1129[    2.975919] SELinux:  Context u:object_r:vendor_audio_data_file:s0 is not valid (left unmapped).
1130[    2.977116] SELinux:  Context u:object_r:vendor_radio_data_file:s0 is not valid (left unmapped).
1131[    2.977821] SELinux:  Context u:object_r:vendor_mbn_data_file:s0 is not valid (left unmapped).
1132[    2.977942] SELinux:  Context u:object_r:location_data_file:s0 is not valid (left unmapped).
1133[    2.979389] SELinux:  Context u:object_r:vendor_time_data_file:s0 is not valid (left unmapped).
1134[    2.979914] SELinux:  Context u:object_r:vendor_fm_data_file:s0 is not valid (left unmapped).
1135[    2.980103] SELinux:  Context u:object_r:mpctl_data_file:s0 is not valid (left unmapped).
1136[    2.980489] SELinux:  Context u:object_r:iop_data_file:s0 is not valid (left unmapped).
1137[    2.980874] SELinux:  Context u:object_r:qti_logkit_priv_data_file:s0 is not valid (left unmapped).
1138[    2.981300] SELinux:  Context u:object_r:qti_logkit_pub_data_file:s0 is not valid (left unmapped).
1139[    2.981415] SELinux:  Context u:object_r:qti_logkit_priv_socket:s0 is not valid (left unmapped).
1140[    2.981521] SELinux:  Context u:object_r:qti_logkit_pub_socket:s0 is not valid (left unmapped).
1141[    2.981710] SELinux:  Context u:object_r:swap_data_file:s0 is not valid (left unmapped).
1142[    2.981804] SELinux:  Context u:object_r:vendor_vpp_data_file:s0 is not valid (left unmapped).
1143[    2.981909] SELinux:  Context u:object_r:vendor_tui_data_file:s0 is not valid (left unmapped).
1144[    2.982000] SELinux:  Context u:object_r:hbtp_log_file:s0 is not valid (left unmapped).
1145[    2.982093] SELinux:  Context u:object_r:tlocd_data_file:s0 is not valid (left unmapped).
1146[    2.982185] SELinux:  Context u:object_r:hal_neuralnetworks_data_file:s0 is not valid (left unmapped).
1147[    2.982281] SELinux:  Context u:object_r:dbvc_data_file:s0 is not valid (left unmapped).
1148[    2.982379] SELinux:  Context u:object_r:aplog_data_file:s0 is not valid (left unmapped).
1149[    2.982481] SELinux:  Context u:object_r:dropbox_data_file:s0 is not valid (left unmapped).
1150[    2.982580] SELinux:  Context u:object_r:panic_data_file:s0 is not valid (left unmapped).
1151[    2.982710] SELinux:  Context u:object_r:bugreport_data_file:s0 is not valid (left unmapped).
1152[    2.982883] SELinux:  Context u:object_r:chargeonly_data_file:s0 is not valid (left unmapped).
1153[    2.982985] SELinux:  Context u:object_r:ramdump_data_file:s0 is not valid (left unmapped).
1154[    2.983502] SELinux:  Context u:object_r:bt_ramdump_data_file:s0 is not valid (left unmapped).
1155[    2.983620] SELinux:  Context u:object_r:hwrev_data_file:s0 is not valid (left unmapped).
1156[    2.984142] SELinux:  Context u:object_r:nfc_vendor_data_file:s0 is not valid (left unmapped).
1157[    2.984268] SELinux:  Context u:object_r:fpc_data_file:s0 is not valid (left unmapped).
1158[    2.984363] SELinux:  Context u:object_r:fps_data_file:s0 is not valid (left unmapped).
1159[    2.984463] SELinux:  Context u:object_r:mdlog_data_file:s0 is not valid (left unmapped).
1160[    2.985071] SELinux:  Context u:object_r:mediadrm_vendor_data_file:s0 is not valid (left unmapped).
1161[    2.986032] SELinux:  Context u:object_r:vendor_memtest_data_file:s0 is not valid (left unmapped).
1162[    3.036038] SELinux:  Context u:object_r:log_app_data_file:s0 is not valid (left unmapped).
1163[    3.466728] get_battery_serialnumber: Battsn = SB18C52857
1164[    3.466738] get_profile_by_serialnumber: Default Serial Number SB18C52857
1165[    3.466742] get_profile_by_serialnumber: Battery Match Found using qcom,kd40-atl-4000mah
1166[    3.466749] QCOM-STEPCHG: read_range_data_from_node: Count qcom,step-chg-ranges failed, rc=-22
1167[    3.466753] QCOM-STEPCHG: read_range_data_from_node: Count qcom,jeita-fcc-ranges failed, rc=-22
1168[    3.466757] QCOM-STEPCHG: read_range_data_from_node: Count qcom,jeita-fv-ranges failed, rc=-22
1169[    3.467767] SELinux:  Context u:object_r:greybus_fw_data_file:s0 is not valid (left unmapped).
1170[    3.467828] SELinux:  Context u:object_r:adspd_data_file:s0 is not valid (left unmapped).
1171[    3.527361] SELinux:  Context u:object_r:misc_ne_data_file:s0 is not valid (left unmapped).
1172[    3.652299] SELinux:  Context u:object_r:magisk_file:s0 is not valid (left unmapped).
1173[    3.653831] SELinux:  Context  is not valid (left unmapped).
1174[    3.665822] EXT4-fs (mmcblk0p33): mounted filesystem without journal. Opts:
1175[    3.675886] EXT4-fs (mmcblk0p46): mounted filesystem with ordered data mode. Opts:
1176[    3.999149] type=1400 audit(1582755063.336:228): avc: denied { getattr } for pid=447 comm="recovery" path="/data/misc/adb" dev="mmcblk0p80" ino=133 scontext=u:r:recovery:s0 tcontext=u:object_r:adb_keys_file:s0 tclass=dir permissive=1
1177[    3.999171] type=1400 audit(1582755064.373:538): avc: denied { read } for pid=447 comm="recovery" name="0" dev="mmcblk0p80" ino=2828 scontext=u:r:recovery:s0 tcontext=u:object_r:media_rw_data_file:s0 tclass=dir permissive=1
1178[    3.999310] type=1400 audit(1582755064.373:538): avc: denied { read } for pid=447 comm="recovery" name="0" dev="mmcblk0p80" ino=2828 scontext=u:r:recovery:s0 tcontext=u:object_r:media_rw_data_file:s0 tclass=dir permissive=1
1179[    3.999320] type=1400 audit(1582755064.373:539): avc: denied { open } for pid=447 comm="recovery" path="/sdcard" dev="mmcblk0p80" ino=2828 scontext=u:r:recovery:s0 tcontext=u:object_r:media_rw_data_file:s0 tclass=dir permissive=1
1180[    4.002137] type=1400 audit(1582755064.373:539): avc: denied { open } for pid=447 comm="recovery" path="/sdcard" dev="mmcblk0p80" ino=2828 scontext=u:r:recovery:s0 tcontext=u:object_r:media_rw_data_file:s0 tclass=dir permissive=1
1181[    4.002148] type=1400 audit(1582755064.376:540): avc: denied { getattr } for pid=447 comm="recovery" path="/sdcard/PWIjc3O9Qm0KTQtWgvyFVD" dev="mmcblk0p80" ino=3540 scontext=u:r:recovery:s0 tcontext=u:object_r:media_rw_data_file:s0:c512,c768 tclass=dir permissive=1
1182[    4.533378] msm_dwc3_perf_vote_work: in_perf_mode:0, interrupts in last sample:0
1183[    4.561582] type=1400 audit(1582755064.376:540): avc: denied { getattr } for pid=447 comm="recovery" path="/sdcard/PWIjc3O9Qm0KTQtWgvyFVD" dev="mmcblk0p80" ino=3540 scontext=u:r:recovery:s0 tcontext=u:object_r:media_rw_data_file:s0:c512,c768 tclass=dir permissive=1
1184[    4.561595] type=1400 audit(1582755064.936:541): avc: denied { getattr } for pid=447 comm="recovery" path="/vndservice_contexts" dev="rootfs" ino=11862 scontext=u:r:recovery:s0 tcontext=u:object_r:vndservice_contexts_file:s0 tclass=file permissive=1
1185[    4.561657] type=1400 audit(1582755064.936:541): avc: denied { getattr } for pid=447 comm="recovery" path="/vndservice_contexts" dev="rootfs" ino=11862 scontext=u:r:recovery:s0 tcontext=u:object_r:vndservice_contexts_file:s0 tclass=file permissive=1
1186[    4.561666] type=1400 audit(1582755064.936:542): avc: denied { getattr } for pid=447 comm="recovery" path="/vendor_seapp_contexts" dev="rootfs" ino=11860 scontext=u:r:recovery:s0 tcontext=u:object_r:seapp_contexts_file:s0 tclass=file permissive=1
1187[    6.666721] msm_dwc3_perf_vote_work: in_perf_mode:0, interrupts in last sample:0
1188[    6.883534] init: starting service 'time_daemon'...
1189[    6.884292] type=1400 audit(1582755064.936:542): avc: denied { getattr } for pid=447 comm="recovery" path="/vendor_seapp_contexts" dev="rootfs" ino=11860 scontext=u:r:recovery:s0 tcontext=u:object_r:seapp_contexts_file:s0 tclass=file permissive=1
1190[    6.884313] type=1400 audit(1582755067.260:646): avc: denied { dac_read_search } for pid=1 comm="init" capability=2 scontext=u:r:init:s0 tcontext=u:r:init:s0 tclass=capability permissive=1
1191[    6.896167] type=1400 audit(1582755067.260:646): avc: denied { dac_read_search } for pid=1 comm="init" capability=2 scontext=u:r:init:s0 tcontext=u:r:init:s0 tclass=capability permissive=1
1192[    6.896185] type=1400 audit(1582755067.270:647): avc: denied { read } for pid=569 comm="time_daemon" name="rtc0" dev="tmpfs" ino=18424 scontext=u:r:recovery:s0 tcontext=u:object_r:rtc_device:s0 tclass=chr_file permissive=1
1193[    6.896578] type=1400 audit(1582755067.270:647): avc: denied { read } for pid=569 comm="time_daemon" name="rtc0" dev="tmpfs" ino=18424 scontext=u:r:recovery:s0 tcontext=u:object_r:rtc_device:s0 tclass=chr_file permissive=1
1194[    6.896592] type=1400 audit(1582755067.270:648): avc: denied { open } for pid=569 comm="time_daemon" path="/dev/rtc0" dev="tmpfs" ino=18424 scontext=u:r:recovery:s0 tcontext=u:object_r:rtc_device:s0 tclass=chr_file permissive=1
1195[    6.896656] type=1400 audit(1582755067.270:648): avc: denied { open } for pid=569 comm="time_daemon" path="/dev/rtc0" dev="tmpfs" ino=18424 scontext=u:r:recovery:s0 tcontext=u:object_r:rtc_device:s0 tclass=chr_file permissive=1
1196[    6.896666] type=1400 audit(1582755067.270:649): avc: denied { ioctl } for pid=569 comm="time_daemon" path="/dev/rtc0" dev="tmpfs" ino=18424 ioctlcmd=0x7009 scontext=u:r:recovery:s0 tcontext=u:object_r:rtc_device:s0 tclass=chr_file permissive=1
1197[    6.903013] type=1400 audit(1582755067.270:649): avc: denied { ioctl } for pid=569 comm="time_daemon" path="/dev/rtc0" dev="tmpfs" ino=18424 ioctlcmd=0x7009 scontext=u:r:recovery:s0 tcontext=u:object_r:rtc_device:s0 tclass=chr_file permissive=1
1198[    6.903033] type=1400 audit(1582755067.276:650): avc: denied { sys_time } for pid=569 comm="time_daemon" capability=25 scontext=u:r:recovery:s0 tcontext=u:r:recovery:s0 tclass=capability permissive=1
1199[    6.952737] init: starting service 'adbd'...
1200[    6.954226] init: Created socket '/dev/socket/adbd', mode 660, user 1000, group 1000
1201[    6.958584] read descriptors
1202[    6.958659] read strings
1203[    6.959191] init: processing action (sys.usb.config=adb && sys.usb.ffs.ready=1) from (/init.recovery.usb.rc:113)
1204[    6.960399] msm-dwc3 4e00000.ssusb: DWC3_CONTROLLER_NOTIFY_OTG_EVENT received
1205[    6.960415] msm-dwc3 4e00000.ssusb: SDP CHK: rescheduled
1206[    6.960425] msm-dwc3 4e00000.ssusb: DWC3_GSI_EVT_BUF_SETUP
1207[    6.960432] msm-dwc3 4e00000.ssusb: Evt buf 0000000000000000 dma fcc5f000 length 4096
1208[    6.960442] msm-dwc3 4e00000.ssusb: Evt buf 0000000000000000 dma fcc6a000 length 4096
1209[    6.960451] msm-dwc3 4e00000.ssusb: Evt buf 0000000000000000 dma fcc6b000 length 4096
1210[    6.964441] android_work: did not send uevent (0 0 0000000000000000)
1211[    7.075743] msm-dwc3 4e00000.ssusb: DWC3_CONTROLLER_NOTIFY_OTG_EVENT received
1212[    7.075760] msm-dwc3 4e00000.ssusb: DWC3_CONTROLLER_SET_CURRENT_DRAW_EVENT received
1213[    7.075795] msm-dwc3 4e00000.ssusb: Avail curr from USB = 100
1214[    7.086265] msm-dwc3 4e00000.ssusb: DWC3_CONTROLLER_CONNDONE_EVENT received
1215[    7.135545] android_work: sent uevent USB_STATE=CONNECTED
1216[    7.136597] msm-dwc3 4e00000.ssusb: DWC3_CONTROLLER_NOTIFY_OTG_EVENT received
1217[    7.136610] msm-dwc3 4e00000.ssusb: DWC3_CONTROLLER_SET_CURRENT_DRAW_EVENT received
1218[    7.136711] android_work: sent uevent USB_STATE=DISCONNECTED
1219[    7.147297] msm-dwc3 4e00000.ssusb: DWC3_CONTROLLER_CONNDONE_EVENT received
1220[    7.209552] android_work: sent uevent USB_STATE=CONNECTED
1221[    7.240630] configfs-gadget gadget: full-speed config #1: b
1222[    7.240716] msm-dwc3 4e00000.ssusb: DWC3_CONTROLLER_SET_CURRENT_DRAW_EVENT received
1223[    7.240727] msm-dwc3 4e00000.ssusb: SDP CHK: cancelled
1224[    7.240748] msm-dwc3 4e00000.ssusb: Avail curr from USB = 500
1225[    7.240957] pmi632_charger: smblib_run_aicl: re-running AICL
1226[    7.241015] android_work: sent uevent USB_STATE=CONFIGURED
1227[    7.254610] audit_log_lost: 11 callbacks suppressed
1228[    7.254612] audit: audit_lost=612 audit_rate_limit=5 audit_backlog_limit=64
1229[    7.254614] audit: rate limit exceeded
1230[    7.325265] pmi632_charger: smblib_icl_change_work: icl_settled=500000
1231[    7.325289] pmi632_charger: default_irq_handler: IRQ: aicl-done
1232[    7.496852] pmi632_charger: chg_state_change_irq_handler: IRQ: chg-state-change
1233[    7.496893] batt power supply prop 4 not supported
1234[    8.800067] msm_dwc3_perf_vote_work: in_perf_mode:0, interrupts in last sample:78
1235[   10.933432] msm_dwc3_perf_vote_work: in_perf_mode:0, interrupts in last sample:0
1236[   13.066755] msm_dwc3_perf_vote_work: in_perf_mode:0, interrupts in last sample:0
1237[   15.200089] msm_dwc3_perf_vote_work: in_perf_mode:0, interrupts in last sample:0
1238[   17.333417] msm_dwc3_perf_vote_work: in_perf_mode:0, interrupts in last sample:0
1239[   19.466753] msm_dwc3_perf_vote_work: in_perf_mode:0, interrupts in last sample:0
1240[   20.394847] pmi632_charger: default_irq_handler: IRQ: aicl-done
1241[   21.600084] msm_dwc3_perf_vote_work: in_perf_mode:0, interrupts in last sample:0
1242[   23.733421] msm_dwc3_perf_vote_work: in_perf_mode:0, interrupts in last sample:0
1243[   25.866749] msm_dwc3_perf_vote_work: in_perf_mode:0, interrupts in last sample:0
1244[   28.000082] msm_dwc3_perf_vote_work: in_perf_mode:0, interrupts in last sample:0
1245[   30.133416] msm_dwc3_perf_vote_work: in_perf_mode:0, interrupts in last sample:0
1246[   32.266753] msm_dwc3_perf_vote_work: in_perf_mode:0, interrupts in last sample:0
1247[   33.507672] pmi632_charger: default_irq_handler: IRQ: aicl-done
1248[   34.400109] msm_dwc3_perf_vote_work: in_perf_mode:0, interrupts in last sample:6
1249doha:/ # lsmod
1250lsmod
1251Module                  Size  Used by
1252mmi_sys_temp           16384  0
1253tzlog_dump             16384  0
1254mmi_info               28672  1 tzlog_dump
1255mmi_annotate           16384  2 tzlog_dump,mmi_info
1256sensors_class          20480  0
1257utags                  36864  0
1258exfat                 147456  0
1259doha:/ #
1260C:\Users\Sambukizon\Desktop>
1261C:\Users\Sambukizon\Desktop>fastboot boot test12.img
1262Sending 'boot.img' (39296 KB)                      OKAY [ 34.877s]
1263Booting                                            OKAY [ 10.245s]
1264Finished. Total time: 45.216s
1265
1266C:\Users\Sambukizon\Desktop>adb shell
1267doha:/ # dmesg
1268dmesg
1269[    0.000000] Booting Linux on physical CPU 0x0
1270[    0.000000] Linux version 4.14.98-perf+ (hudsoncm@ilclbld159) (clang version 6.0.9 for Android NDK) #1 SMP PREEMPT Wed Nov 6 08:09:18 CST 2019
1271[    0.000000] Boot CPU: AArch64 Processor [51af8014]
1272[    0.000000] Machine: Qualcomm Technologies, Inc. trinket pm6125 + pmi632 doha
1273[    0.000000] efi: Getting EFI parameters from FDT:
1274[    0.000000] efi: UEFI not found.
1275[    0.000000] OF: reserved mem: OVERLAP DETECTED!
1276[    0.000000] disp_rdump_region@5c000000 (0x000000005c000000--0x000000005d000000) overlaps with cont_splash_region@5c000000 (0x000000005c000000--0x000000005cf00000)
1277[    0.000000] Reserved memory: created CMA memory pool at 0x00000000fec00000, size 16 MiB
1278[    0.000000] OF: reserved mem: initialized node qseecom_ta_region, compatible id shared-dma-pool
1279[    0.000000] Reserved memory: created CMA memory pool at 0x00000000fcc00000, size 32 MiB
1280[    0.000000] OF: reserved mem: initialized node linux,cma, compatible id shared-dma-pool
1281[    0.000000] Reserved memory: created CMA memory pool at 0x00000000f4000000, size 140 MiB
1282[    0.000000] OF: reserved mem: initialized node secure_display_region, compatible id shared-dma-pool
1283[    0.000000] Reserved memory: created CMA memory pool at 0x000000013fc00000, size 4 MiB
1284[    0.000000] OF: reserved mem: initialized node mem_dump_region, compatible id shared-dma-pool
1285[    0.000000] Reserved memory: created CMA memory pool at 0x00000000f3c00000, size 4 MiB
1286[    0.000000] OF: reserved mem: initialized node sdsp_region, compatible id shared-dma-pool
1287[    0.000000] Reserved memory: created CMA memory pool at 0x00000000f3400000, size 8 MiB
1288[    0.000000] OF: reserved mem: initialized node adsp_region, compatible id shared-dma-pool
1289[    0.000000] Removed memory: created DMA memory pool at 0x0000000045700000, size 6 MiB
1290[    0.000000] OF: reserved mem: initialized node hyp_region@45700000, compatible id removed-dma-pool
1291[    0.000000] Removed memory: created DMA memory pool at 0x0000000045e00000, size 1 MiB
1292[    0.000000] OF: reserved mem: initialized node xbl_aop_mem@45e00000, compatible id removed-dma-pool
1293[    0.000000] Removed memory: created DMA memory pool at 0x0000000045fff000, size 0 MiB
1294[    0.000000] OF: reserved mem: initialized node sec_apps_region@45fff000, compatible id removed-dma-pool
1295[    0.000000] Removed memory: created DMA memory pool at 0x0000000046000000, size 2 MiB
1296[    0.000000] OF: reserved mem: initialized node smem@46000000, compatible id removed-dma-pool
1297[    0.000000] Removed memory: created DMA memory pool at 0x0000000046200000, size 45 MiB
1298[    0.000000] OF: reserved mem: initialized node removed_region@46200000, compatible id removed-dma-pool
1299[    0.000000] Removed memory: created DMA memory pool at 0x000000004ab00000, size 5 MiB
1300[    0.000000] OF: reserved mem: initialized node camera_region@4ab00000, compatible id removed-dma-pool
1301[    0.000000] Removed memory: created DMA memory pool at 0x000000004b000000, size 126 MiB
1302[    0.000000] OF: reserved mem: initialized node modem_region@4b000000, compatible id removed-dma-pool
1303[    0.000000] Removed memory: created DMA memory pool at 0x0000000052e00000, size 5 MiB
1304[    0.000000] OF: reserved mem: initialized node pil_video_region@52e00000, compatible id removed-dma-pool
1305[    0.000000] Removed memory: created DMA memory pool at 0x0000000053300000, size 2 MiB
1306[    0.000000] OF: reserved mem: initialized node wlan_msa_region@53300000, compatible id removed-dma-pool
1307[    0.000000] Removed memory: created DMA memory pool at 0x0000000053500000, size 30 MiB
1308[    0.000000] OF: reserved mem: initialized node cdsp_regions@53500000, compatible id removed-dma-pool
1309[    0.000000] Removed memory: created DMA memory pool at 0x0000000055300000, size 30 MiB
1310[    0.000000] OF: reserved mem: initialized node pil_adsp_region@55300000, compatible id removed-dma-pool
1311[    0.000000] Removed memory: created DMA memory pool at 0x0000000057100000, size 0 MiB
1312[    0.000000] OF: reserved mem: initialized node ips_fw_region@57100000, compatible id removed-dma-pool
1313[    0.000000] Removed memory: created DMA memory pool at 0x0000000057110000, size 0 MiB
1314[    0.000000] OF: reserved mem: initialized node ipa_gsi_region@57110000, compatible id removed-dma-pool
1315[    0.000000] Removed memory: created DMA memory pool at 0x0000000057115000, size 0 MiB
1316[    0.000000] OF: reserved mem: initialized node gpu_region@57115000, compatible id removed-dma-pool
1317[    0.000000] Reserved memory: created DMA memory pool at 0x000000005e400000, size 20 MiB
1318[    0.000000] OF: reserved mem: initialized node qseecom_region@5e400000, compatible id shared-dma-pool
1319[    0.000000] Removed memory: created DMA memory pool at 0x000000005f800000, size 30 MiB
1320[    0.000000] OF: reserved mem: initialized node cdsp_sec_regions@5f800000, compatible id removed-dma-pool
1321[    0.000000] On node 0 totalpages: 961929
1322[    0.000000]   DMA zone: 10935 pages used for memmap
1323[    0.000000]   DMA zone: 0 pages reserved
1324[    0.000000]   DMA zone: 699785 pages, LIFO batch:31
1325[    0.000000]   Normal zone: 4096 pages used for memmap
1326[    0.000000]   Normal zone: 262144 pages, LIFO batch:31
1327[    0.000000] psci: probing for conduit method from DT.
1328[    0.000000] psci: PSCIv1.0 detected in firmware.
1329[    0.000000] psci: Using standard PSCI v0.2 function IDs
1330[    0.000000] psci: MIGRATE_INFO_TYPE not supported.
1331[    0.000000] psci: SMC Calling Convention v1.1
1332[    0.000000] random: fast init done
1333[    0.000000] random: get_random_bytes called from start_kernel+0x90/0x498 with crng_init=1
1334[    0.000000] percpu: Embedded 23 pages/cpu @fffffffc7f8c1000 s55064 r8192 d30952 u94208
1335[    0.000000] pcpu-alloc: s55064 r8192 d30952 u94208 alloc=23*4096
1336[    0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 [0] 4 [0] 5 [0] 6 [0] 7
1337[    0.000000] CPU features: enabling workaround for Kryo2xx Silver erratum 845719
1338[    0.000000] Built 1 zonelists, mobility grouping on.  Total pages: 946898
1339[    0.000000] Kernel command line: rcupdate.rcu_expedited=1 rcu_nocbs=0-7 console=null androidboot.hardware=qcom androidboot.memcg=1 lpm_levels.sleep_disabled=1 video=vfb:640x400,bpp=32,memsize=3072000 msm_rtb.filter=0x237 service_locator.enable=1 swiotlb=1 firmware_class.path=/vendor/firmware_mnt/image loop.max_part=7 cgroup.memory=nokmem,nosocket androidboot.usbcontroller=4e00000.dwc3 printk.devkmsg=on androidboot.hab.csv=1 androidboot.hab.product=doha androidboot.hab.cid=50 androidboot.selinux=permissive skip_override androidboot.fastboot=1 buildvariant=eng quiet androidboot.verifiedbootstate=orange androidboot.keymaster=1 dm="1 vroot none ro 1,0 6224272 verity 1 PARTUUID=14177759-5a02-3091-6d70-9d3bb205a2ac PARTUUID=14177759-5a02-3091-6d70-9d3bb205a2ac 4096 4096 778034 778034 sha1 ce35c8db6cf55082e6a0f7876a6cb9e03f07dba6 e03ce53f143fcad93d11357ea2267e60f25a6fff77fe3e3121b8c00e3b67d82d 10 restart_on_corruption ignore_zero_blocks use_fec_from_device PARTUUID=14177759-5a02-3091-6d70-9d3bb205a2ac fec_roots 2 fec_blocks 784162 fec_start 784162" root=/dev/dm-0 androidboot.vbmeta.device=PARTUUID=7e8e608f-836b-7e86-a381-cc68f4dee212 androidboot.vbmeta.avb_version=1.0 androidboot.vbmeta.device_state=unlocked androidboot.vbmeta.hash_alg=sha256 androidboot.vbmeta.size=4608 androidboot.vbmeta.digest=a80b5f59a5265ad1bc2c86a520d84a9c869899f2513d05da51424c58e934f24d androidboot.vbmeta.invalidate_on_error=yes androidboot.veritymode=enforcing androidboot.bootdevice=4744000.sdhci androidboot.serialno=ZY22754V4Z androidboot.device=doha androidboot.revision=pvt androidboot.hwrev=0xC000 androidboot.radio=LATAM androidboot.powerup_reason=0x00100000 androidboot.bootreason=hardware_reset msm_poweroff.download_mode=0 androidboot.wifimacaddr=08:CC:27:67:21:50,08:CC:27:67:21:51 androidboot.btmacaddr=08:CC:27:67:21:4F androidboot.bootloader=MBM-3.0-doha_retail-cc3e8ae-191106 androidboot.carrier=retla androidboot.hardware.sku=XT2019-2 androidboot.mode=normal androidboot.baseband=msm msm_drm.dsi_display0=dsi_hx83112a_ds_vid_display: androidboot.slot_suffix=_a skip_initramfs rootwait ro init=/init androidboot.dtbo_idx=0 androidboot.dtb_idx=0 androidboot.dualsim=true androidboot.secure_hardware=1 androidboot.cid=0x0032 androidboot.write_protect=0 androidboot.bl_state=2
1340[    0.000000] device-mapper: init: will configure 1 devices
1341[    0.000000] log_buf_len individual max cpu contribution: 131072 bytes
1342[    0.000000] log_buf_len total cpu_extra contributions: 917504 bytes
1343[    0.000000] log_buf_len min size: 131072 bytes
1344[    0.000000] log_buf_len: 1048576 bytes
1345[    0.000000] early log buf free: 122444(93%)
1346[    0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
1347[    0.000000] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
1348[    0.000000] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
1349[    0.000000] software IO TLB: mapped [mem 0xfffbf000-0xfffff000] (0MB)
1350[    0.000000] Memory: 3476180K/3847716K available (19964K kernel code, 1826K rwdata, 6416K rodata, 4096K init, 9401K bss, 162640K reserved, 208896K cma-reserved)
1351[    0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
1352[    0.000000] Preemptible hierarchical RCU implementation.
1353[    0.000000]  RCU dyntick-idle grace-period acceleration is enabled.
1354[    0.000000]  All grace periods are expedited (rcu_expedited).
1355[    0.000000]  Tasks RCU enabled.
1356[    0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0
1357[    0.000000] GICv3: no VLPI support, no direct LPI support
1358[    0.000000] GICv3: CPU0: found redistributor 0 region 0:0x000000000f300000
1359[    0.000000]  Offload RCU callbacks from CPUs: 0-7.
1360[    0.000000] arch_timer: cp15 and mmio timer(s) running at 19.20MHz (virt/virt).
1361[    0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x46d987e47, max_idle_ns: 440795202767 ns
1362[    0.000003] sched_clock: 56 bits at 19MHz, resolution 52ns, wraps every 4398046511078ns
1363[    0.000015] clocksource: Switched to clocksource arch_sys_counter
1364[    0.002414] Calibrating delay loop (skipped), value calculated using timer frequency.. 38.00 BogoMIPS (lpj=64000)
1365[    0.002428] pid_max: default: 32768 minimum: 301
1366[    0.002531] Security Framework initialized
1367[    0.002538] SELinux:  Initializing.
1368[    0.002594] SELinux:  Starting in permissive mode
1369[    0.002638] Mount-cache hash table entries: 8192 (order: 4, 65536 bytes)
1370[    0.002650] Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes)
1371[    0.006868] NOHZ: local_softirq_pending 02
1372[    0.008981] ASID allocator initialised with 65536 entries
1373[    0.010076] NOHZ: local_softirq_pending 02
1374[    0.011087] Hierarchical SRCU implementation.
1375[    0.016870] MSM Memory Dump base table set up
1376[    0.016886] MSM Memory Dump apps data table set up
1377[    0.016996] EFI services will not be available.
1378[    0.019389] smp: Bringing up secondary CPUs ...
1379[    0.029720] GICv3: CPU1: found redistributor 1 region 0:0x000000000f320000
1380[    0.029780] CPU1: Booted secondary processor [51af8014]
1381[    0.040082] GICv3: CPU2: found redistributor 2 region 0:0x000000000f340000
1382[    0.040132] CPU2: Booted secondary processor [51af8014]
1383[    0.050366] GICv3: CPU3: found redistributor 3 region 0:0x000000000f360000
1384[    0.050415] CPU3: Booted secondary processor [51af8014]
1385[    0.061594] CPU features: enabling workaround for ARM erratum 858921
1386[    0.061631] CPU features: Unsupported CPU feature variation detected.
1387[    0.061674] GICv3: CPU4: found redistributor 100 region 0:0x000000000f380000
1388[    0.061715] arch_timer: Enabling local workaround for ARM erratum 858921
1389[    0.061747] arch_timer: CPU4: Trapping CNTVCT access
1390[    0.061767] CPU4: Booted secondary processor [51af8002]
1391[    0.072351] GICv3: CPU5: found redistributor 101 region 0:0x000000000f3a0000
1392[    0.072392] arch_timer: Enabling local workaround for ARM erratum 858921
1393[    0.072417] arch_timer: CPU5: Trapping CNTVCT access
1394[    0.072436] CPU5: Booted secondary processor [51af8002]
1395[    0.082975] GICv3: CPU6: found redistributor 102 region 0:0x000000000f3c0000
1396[    0.083017] arch_timer: Enabling local workaround for ARM erratum 858921
1397[    0.083043] arch_timer: CPU6: Trapping CNTVCT access
1398[    0.083061] CPU6: Booted secondary processor [51af8002]
1399[    0.093636] GICv3: CPU7: found redistributor 103 region 0:0x000000000f3e0000
1400[    0.093678] arch_timer: Enabling local workaround for ARM erratum 858921
1401[    0.093704] arch_timer: CPU7: Trapping CNTVCT access
1402[    0.093723] CPU7: Booted secondary processor [51af8002]
1403[    0.094064] smp: Brought up 1 node, 8 CPUs
1404[    0.094071] SMP: Total of 8 processors activated.
1405[    0.094076] CPU features: detected feature: GIC system register CPU interface
1406[    0.094079] CPU features: detected feature: 32-bit EL0 Support
1407[    0.094821] CPU: All CPU(s) started at EL1
1408[    0.094883] alternatives: patching kernel code
1409[    0.096773] CPU7: update max cpu_capacity 1024
1410[    0.120102] CPU0: update max cpu_capacity 640
1411[    0.141233] Registered cp15_barrier emulation handler
1412[    0.141253] Registered setend emulation handler
1413[    0.141479] CPU4: update max cpu_capacity 1024
1414[    0.141506] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 6370867519511994 ns
1415[    0.141517] futex hash table entries: 2048 (order: 6, 262144 bytes)
1416[    0.152422] pinctrl core: initialized pinctrl subsystem
1417[    0.153225] DMI not present or invalid.
1418[    0.153675] NET: Registered protocol family 16
1419[    0.158177] schedtune: configured to support 5 boost groups
1420[    0.159298] cpuidle: using governor menu
1421[    0.159356] cpuidle: using governor qcom
1422[    0.159561] NET: Registered protocol family 42
1423[    0.170589] vdso: 2 pages (1 code @ ffffff8896807000, 1 data @ ffffff8897404000)
1424[    0.170603] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers.
1425[    0.172682] DMA: preallocated 256 KiB pool for atomic allocations
1426[    0.174249] exit: IPA_USB init success!
1427[    0.174826] pstore: allocate compression buffer error!
1428[    0.174897] console [pstore-1] enabled
1429[    0.175016] pstore: Registered ramoops as persistent store backend
1430[    0.175029] ramoops: attached 0xbf800@0xaf000000, ecc: 0/0
1431[    0.183170] unable to find DT imem DLOAD mode node
1432[    0.185759] unable to find DT imem EDLOAD mode node
1433[    0.194514] platform 6080000.qcom,mss: assigned reserved memory node modem_region@4b000000
1434[    0.195226] msm_watchdog f017000.qcom,wdt: wdog absent resource not present
1435[    0.195822] msm_watchdog f017000.qcom,wdt: MSM Watchdog Initialized
1436[    0.196758] sps:sps is ready.
1437[    0.198521] platform ab00000.qcom,lpass: assigned reserved memory node pil_adsp_region@55300000
1438[    0.198858] platform b300000.qcom,turing: assigned reserved memory node cdsp_regions@53500000
1439[    0.199192] platform soc:mem_dump: assigned reserved memory node mem_dump_region
1440[    0.203654] platform soc:qcom,smem: assigned reserved memory node smem@46000000
1441[    0.204515] platform soc:qcom,msm-adsprpc-mem: assigned reserved memory node adsp_region
1442[    0.205198] qcom_glink_rpm soc:rpm-glink: failed to register early notif -22
1443[    0.206008] qcom_smd_rpm_probe: RPM-SMD running version 0
1444[    0.206354] msm_glink soc:qcom,glink: [probe_subsystem]: no qcom,glink-label for wdsp
1445[    0.208063] platform 46d00000.qseecom: assigned reserved memory node qseecom_region@5e400000
1446[    0.210195] spmi spmi-0: PMIC arbiter version v5 (0x50010000)
1447[    0.214011] platform soc:qcom,ipa_fws: assigned reserved memory node ips_fw_region@57100000
1448[    0.214230] LCDB: qpnp_lcdb_regulator_probe: Failed to parse dt rc=-517
1449[    0.214261] platform 5ae0000.qcom,venus: assigned reserved memory node pil_video_region@52e00000
1450[    0.220325] trinket-pinctrl 400000.pinctrl: invalid resource
1451[    0.299054] clk: add_opp: Set OPP pair (300000000 Hz, 588000 uv) on cpu0
1452[    0.299483] clk: add_opp: Set OPP pair (1804800000 Hz, 944000 uv) on cpu0
1453[    0.299574] clk: add_opp: Set OPP pair (300000000 Hz, 588000 uv) on cpu1
1454[    0.299992] clk: add_opp: Set OPP pair (1804800000 Hz, 944000 uv) on cpu1
1455[    0.300137] clk: add_opp: Set OPP pair (300000000 Hz, 588000 uv) on cpu2
1456[    0.300558] clk: add_opp: Set OPP pair (1804800000 Hz, 944000 uv) on cpu2
1457[    0.300645] clk: add_opp: Set OPP pair (300000000 Hz, 588000 uv) on cpu3
1458[    0.301052] clk: add_opp: Set OPP pair (1804800000 Hz, 944000 uv) on cpu3
1459[    0.301170] clk: add_opp: Set OPP pair (300000000 Hz, 588000 uv) on cpu4
1460[    0.301586] clk: add_opp: Set OPP pair (2016000000 Hz, 960000 uv) on cpu4
1461[    0.301674] clk: add_opp: Set OPP pair (300000000 Hz, 588000 uv) on cpu5
1462[    0.302094] clk: add_opp: Set OPP pair (2016000000 Hz, 960000 uv) on cpu5
1463[    0.302182] clk: add_opp: Set OPP pair (300000000 Hz, 588000 uv) on cpu6
1464[    0.302589] clk: add_opp: Set OPP pair (2016000000 Hz, 960000 uv) on cpu6
1465[    0.302684] clk: add_opp: Set OPP pair (300000000 Hz, 588000 uv) on cpu7
1466[    0.303092] clk: add_opp: Set OPP pair (2016000000 Hz, 960000 uv) on cpu7
1467[    0.304472] sched-energy: Sched-energy-costs installed from DT
1468[    0.306463] cpufreq: driver osm-cpufreq up and running
1469[    0.306472] clk: clk_cpu_osm_driver_probe: OSM CPUFreq driver inited
1470[    0.308819] KPI: Bootloader start count = 67821
1471[    0.308821] KPI: Bootloader end count = 4309527
1472[    0.308822] KPI: Bootloader display count = 2065694079
1473[    0.308823] KPI: Bootloader load kernel count = 4242504437
1474[    0.308826] KPI: Kernel MPM timestamp = 4326862
1475[    0.308827] KPI: Kernel MPM Clock frequency = 32768
1476[    0.308836] socinfo_print: v0.15, id=394, ver=1.0, raw_id=266, raw_ver=0, hw_plat=34, hw_plat_ver=65536
1477[    0.308836]  accessory_chip=0, hw_plat_subtype=0, pmic_model=65581, pmic_die_revision=65537 foundry_id=3 serial_number=2283460787 num_pmics=2 chip_family=0x64 raw_device_family=0x9 raw_device_number=0x1 nproduct_id=0x411 num_clusters=0x1 ncluster_array_offset=0xb0 num_defective_parts=0xc ndefective_parts_array_offset=0xb4 nmodem_supported=0xff
1478[    0.308878] Minidump: Enabled with max number of regions 200
1479[    0.309535] arm-smmu 59a0000.kgsl-smmu: Couldn't get clock: gcc_gpu_memnoc_gfx_clk
1480[    0.309774] AXI: msm_bus_scale_register_client(): msm_bus_scale_register_client: Bus driver not ready.
1481[    0.309776] arm-smmu c600000.apps-smmu: Bus client registration failed
1482[    0.309903] vgaarb: loaded
1483[    0.310010] qcom,qpnp-misc 1c40000.qcom,spmi:qcom,pm6125@0:qcom,misc@900: probe successful
1484[    0.310076] CPU3: update max cpu_capacity 572
1485[    0.310241] SCSI subsystem initialized
1486[    0.310292] usbcore: registered new interface driver usbfs
1487[    0.310303] usbcore: registered new interface driver hub
1488[    0.310369] CPU5: update max cpu_capacity 1024
1489[    0.310420] usbcore: registered new device driver usb
1490[    0.310535] usb_phy_generic soc:usb_nop_phy: soc:usb_nop_phy supply vcc not found, using dummy regulator
1491[    0.310730] qcom,qpnp-power-on 1c40000.qcom,spmi:qcom,pmi632@2:qcom,power-on@800: PMIC@SID2 Power-on reason: Triggered from CBL (External Power Supply) and 'cold' boot
1492[    0.310741] qcom,qpnp-power-on 1c40000.qcom,spmi:qcom,pmi632@2:qcom,power-on@800: PON Register , addr=0x08C7, val=0x80
1493[    0.310753] qcom,qpnp-power-on 1c40000.qcom,spmi:qcom,pmi632@2:qcom,power-on@800: PON Register , addr=0x08C5, val=0x1
1494[    0.310755] qcom,qpnp-power-on 1c40000.qcom,spmi:qcom,pmi632@2:qcom,power-on@800: PMIC@SID2: Power-off reason: Triggered from SOFT (Software)
1495[    0.310852] qcom,qpnp-power-on 1c40000.qcom,spmi:qcom,pm6125@0:qcom,power-on@800: PMIC@SID0 Power-on reason: Triggered from Hard Reset and 'cold' boot
1496[    0.310863] qcom,qpnp-power-on 1c40000.qcom,spmi:qcom,pm6125@0:qcom,power-on@800: PON Register , addr=0x08C7, val=0x80
1497[    0.310874] qcom,qpnp-power-on 1c40000.qcom,spmi:qcom,pm6125@0:qcom,power-on@800: PON Register , addr=0x08C5, val=0x80
1498[    0.310877] qcom,qpnp-power-on 1c40000.qcom,spmi:qcom,pm6125@0:qcom,power-on@800: PMIC@SID0: Power-off reason: Triggered from KPDPWR_N (Long Power Key Hold)
1499[    0.310982] input: qpnp_pon as /devices/platform/soc/1c40000.qcom,spmi/spmi-0/spmi0-00/1c40000.qcom,spmi:qcom,pm6125@0:qcom,power-on@800/input/input0
1500[    0.311240] media: Linux media interface: v0.10
1501[    0.311248] Linux video capture interface: v2.00
1502[    0.312825] (NULL device *): hwmon_device_register() is deprecated. Please convert the driver to use hwmon_device_register_with_info().
1503[    0.312866] (NULL device *): hwmon_device_register() is deprecated. Please convert the driver to use hwmon_device_register_with_info().
1504[    0.312904] (NULL device *): hwmon_device_register() is deprecated. Please convert the driver to use hwmon_device_register_with_info().
1505[    0.312936] (NULL device *): hwmon_device_register() is deprecated. Please convert the driver to use hwmon_device_register_with_info().
1506[    0.312971] (NULL device *): hwmon_device_register() is deprecated. Please convert the driver to use hwmon_device_register_with_info().
1507[    0.315071] dmi: Firmware registration failed.
1508[    0.316387] platform soc:qcom,ion:qcom,ion-heap@27: assigned reserved memory node qseecom_region@5e400000
1509[    0.316427] platform soc:qcom,ion:qcom,ion-heap@19: assigned reserved memory node qseecom_ta_region
1510[    0.316495] platform soc:qcom,ion:qcom,ion-heap@10: assigned reserved memory node secure_display_region
1511[    0.316561] platform soc:qcom,ion:qcom,ion-heap@22: assigned reserved memory node sdsp_region
1512[    0.316627] ION heap system created
1513[    0.316791] ION heap qsecom created at 0x000000005e400000 with size 1400000
1514[    0.316793] ION heap qsecom_ta created at 0x00000000fec00000 with size 1000000
1515[    0.316795] ION heap secure_heap created
1516[    0.316799] ION heap secure_display created at 0x00000000f4000000 with size 8c00000
1517[    0.347233] platform soc:qcom,ion:qcom,ion-heap@14: ion_secure_carveout: creating heap@0x5f800000, size 0x1e00000
1518[    0.347238] ION heap secure_carveout created
1519[    0.347244] ION heap adsp created at 0x00000000f3c00000 with size 400000
1520[    0.348387] PMIC@SID2: PMI632 v2.0 options: 0, 0, 0, 0
1521[    0.348483] PMIC@SID0: PM6125 v1.1 options: 0, 0, 0, 0
1522[    0.348913] AXI: msm_bus_scale_register_client(): msm_bus_scale_register_client: Bus driver not ready.
1523[    0.348915] ipa ipa3_pre_init:5488 fail to register with bus mgr!
1524[    0.348952] ipa ipa3_plat_drv_probe:7029 ipa3_init failed
1525[    0.349554] SDAM base=0xb600 size=128 registered successfully
1526[    0.349669] Advanced Linux Sound Architecture Driver Initialized.
1527[    0.349829] Bluetooth: Core ver 2.22
1528[    0.349839] NET: Registered protocol family 31
1529[    0.349840] Bluetooth: HCI device and connection manager initialized
1530[    0.349844] Bluetooth: HCI socket layer initialized
1531[    0.349845] Bluetooth: L2CAP socket layer initialized
1532[    0.349853] Bluetooth: SCO socket layer initialized
1533[    0.350055] NetLabel: Initializing
1534[    0.350056] NetLabel:  domain hash size = 128
1535[    0.350057] NetLabel:  protocols = UNLABELED CIPSOv4 CALIPSO
1536[    0.350079] NetLabel:  unlabeled traffic allowed by default
1537[    0.350103] pcie:pcie_init.
1538[    0.357661] qcom-clk-smd-rpm soc:qcom,rpmcc: Registered RPM clocks
1539[    0.357779] pm6125_s3_level: Bringing 1uV into 16-16uV
1540[    0.357926] pm6125_s3_floor_level: Bringing 1uV into 16-16uV
1541[    0.358241] pm6125_s3_level_ao: Bringing 1uV into 16-16uV
1542[    0.358429] pm6125_s5_level: Bringing 1uV into 16-16uV
1543[    0.358551] pm6125_s5_floor_level: Bringing 1uV into 16-16uV
1544[    0.358842] pm6125_s5_level_ao: Bringing 1uV into 16-16uV
1545[    0.359573] pm6125_l4: regulator get failed, ret=-517
1546[    0.360162] pm6125_l4: supplied by pm6125_l7
1547[    0.361020] pm6125_l15: supplied by pm6125_l10
1548[    0.362751] LCDB: qpnp_lcdb_regulator_probe: LCDB module successfully registered! lcdb_en=1 ldo_voltage=5500mV ncp_voltage=5500mV bst_voltage=5650mV
1549[    0.362795] sched-energy energy-costs: cpu=0 eff=1024 [freq=300000 cap=96 power_d0=12] -> [freq=1804800 cap=574 power_d0=172]
1550[    0.362799] sched-energy energy-costs: cpu=1 eff=1024 [freq=300000 cap=96 power_d0=12] -> [freq=1804800 cap=574 power_d0=172]
1551[    0.362802] sched-energy energy-costs: cpu=2 eff=1024 [freq=300000 cap=96 power_d0=12] -> [freq=1804800 cap=574 power_d0=172]
1552[    0.362805] sched-energy energy-costs: cpu=3 eff=1024 [freq=300000 cap=96 power_d0=12] -> [freq=1804800 cap=574 power_d0=172]
1553[    0.362808] sched-energy energy-costs: cpu=4 eff=1638 [freq=300000 cap=153 power_d0=211] -> [freq=2016000 cap=1024 power_d0=3391]
1554[    0.362811] sched-energy energy-costs: cpu=5 eff=1638 [freq=300000 cap=153 power_d0=211] -> [freq=2016000 cap=1024 power_d0=3391]
1555[    0.362814] sched-energy energy-costs: cpu=6 eff=1638 [freq=300000 cap=153 power_d0=211] -> [freq=2016000 cap=1024 power_d0=3391]
1556[    0.362817] sched-energy energy-costs: cpu=7 eff=1638 [freq=300000 cap=153 power_d0=211] -> [freq=2016000 cap=1024 power_d0=3391]
1557[    0.362818] sched-energy energy-costs: Sched-energy-costs capacity updated
1558[    0.371255] gcc-trinket 1400000.qcom,gcc: Registered GCC clocks
1559[    0.372176] gpu_cc_gx_gfx3d_clk_src: set OPP pair(320000000 Hz: 64 uV) on 5900000.qcom,kgsl-3d0
1560[    0.372259] gpu_cc_gx_gfx3d_clk_src: set OPP pair(950000000 Hz: 416 uV) on 5900000.qcom,kgsl-3d0
1561[    0.372322] gpu_cc-trinket 5990000.qcom,gpupcc: Registered GPU CC clocks
1562[    0.372750] video_cc-trinket 5b00000.qcom,videocc: Registered Video CC clocks
1563[    0.372909] arm-smmu 59a0000.kgsl-smmu:      non-coherent table walk
1564[    0.372911] arm-smmu 59a0000.kgsl-smmu:      (IDR0.CTTW overridden by FW configuration)
1565[    0.372914] arm-smmu 59a0000.kgsl-smmu:      stream matching with 4 register groups
1566[    0.373951] AXI: msm_bus_scale_register_client(): msm_bus_scale_register_client: Bus driver not ready.
1567[    0.373953] arm-smmu c600000.apps-smmu: Bus client registration failed
1568[    0.374247] AXI: msm_bus_scale_register_client(): msm_bus_scale_register_client: Bus driver not ready.
1569[    0.374249] ipa ipa3_pre_init:5488 fail to register with bus mgr!
1570[    0.374290] ipa ipa3_plat_drv_probe:7029 ipa3_init failed
1571[    0.376182] disp_cc-trinket 5f00000.qcom,dispcc: Registered Display CC clocks
1572[    0.376416] AXI: msm_bus_scale_register_client(): msm_bus_scale_register_client: Bus driver not ready.
1573[    0.376418] arm-smmu c600000.apps-smmu: Bus client registration failed
1574[    0.376651] AXI: msm_bus_scale_register_client(): msm_bus_scale_register_client: Bus driver not ready.
1575[    0.376652] ipa ipa3_pre_init:5488 fail to register with bus mgr!
1576[    0.376672] ipa ipa3_plat_drv_probe:7029 ipa3_init failed
1577[    0.377294] clocksource: Switched to clocksource arch_sys_counter
1578[    0.401166] VFS: Disk quotas dquot_6.6.0
1579[    0.401189] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
1580[    0.402146] mdss_pll_probe: MDSS pll label = MDSS DSI 0 PLL
1581[    0.402149] mdss_pll_probe: mdss_pll_probe: label=MDSS DSI 0 PLL PLL SSC enabled
1582[    0.402320] mdss_pll 5e94400.qcom,mdss_dsi_pll: Failed to create debugfs directory
1583[    0.402324] mdss_pll 5e94400.qcom,mdss_dsi_pll: Failed to create debugfs directory
1584[    0.402327] mdss_pll 5e94400.qcom,mdss_dsi_pll: Failed to create debugfs directory
1585[    0.403742] dsi_pll_clock_register_14nm: Registered DSI PLL ndx=0 clocks successfully
1586[    0.403922] msm_bus_fabric_init_driver
1587[    0.406831] msm_bus_dev_init_qos: Skipping QOS init for 26
1588[    0.406858] msm_bus_device 1880000.ad-hoc-bus: Bus scaling driver probe successful
1589[    0.407425] NET: Registered protocol family 2
1590[    0.407717] TCP established hash table entries: 32768 (order: 6, 262144 bytes)
1591[    0.407797] TCP bind hash table entries: 32768 (order: 7, 524288 bytes)
1592[    0.407946] TCP: Hash tables configured (established 32768 bind 32768)
1593[    0.407991] UDP hash table entries: 2048 (order: 4, 65536 bytes)
1594[    0.408015] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
1595[    0.408101] NET: Registered protocol family 1
1596[    0.408110] PCI: CLS 0 bytes, default 128
1597[    0.408535] arm-smmu c600000.apps-smmu:      non-coherent table walk
1598[    0.408537] arm-smmu c600000.apps-smmu:      (IDR0.CTTW overridden by FW configuration)
1599[    0.408540] arm-smmu c600000.apps-smmu:      stream matching with 54 register groups
1600[    0.409785] iommu: Adding device 4ac0000.qcom,qupv3_0_geni_se:qcom,iommu_qupv3_0_geni_se_cb to group 0
1601[    0.409854] iommu: Adding device 4cc0000.qcom,qupv3_1_geni_se:qcom,iommu_qupv3_1_geni_se_cb to group 1
1602[    0.415860] ipa ipa3_smp2p_probe:6904 fail to get smp2p clk resp bit -517
1603[    0.416092] iommu: Adding device soc:ipa_smmu_ap to group 2
1604[    0.416187] iommu: Adding device soc:ipa_smmu_wlan to group 3
1605[    0.416272] iommu: Adding device soc:ipa_smmu_uc to group 4
1606[    0.416337] ipa ipa3_smp2p_probe:6904 fail to get smp2p clk resp bit -517
1607[    0.416846] Trying to unpack rootfs image as initramfs...
1608[    1.059486] Freeing initrd memory: 25948K
1609[    1.062224] hw perfevents: enabled with armv8_pmuv3 PMU driver, 7 counters available
1610[    1.070895] audit: initializing netlink subsys (disabled)
1611[    1.071222] audit: type=2000 audit(1.070:1): state=initialized audit_enabled=0 res=1
1612[    1.071423] Initialise system trusted keyrings
1613[    1.071627] workingset: timestamp_bits=46 max_order=20 bucket_order=0
1614[    1.074547] Registering sdcardfs 0.1
1615[    1.074683] fuse init (API version 7.26)
1616[    1.074992] SELinux:  Registering netfilter hooks
1617[    1.075525] pfk_ext4 [pfk_ext4_init]: PFK EXT4 inited successfully
1618[    1.075527] pfk_f2fs [pfk_f2fs_init]: PFK F2FS inited successfully
1619[    1.075534] pfk [pfk_init]: Driver initialized successfully
1620[    1.082674] Key type asymmetric registered
1621[    1.082679] Asymmetric key parser 'x509' registered
1622[    1.082690] io scheduler noop registered
1623[    1.082766] io scheduler cfq registered (default)
1624[    1.082768] io scheduler mq-deadline registered
1625[    1.082770] io scheduler kyber registered
1626[    1.091673] fb0: Virtual frame buffer device, using 1024K of video memory
1627[    1.093812] iommu: Adding device 4a00000.qcom,gpi-dma to group 5
1628[    1.095582] iommu: Adding device 4c00000.qcom,gpi-dma to group 6
1629[    1.099710] iommu: Adding device c800000.qcom,icnss to group 7
1630[    1.099783] icnss: Recursive recovery allowed for WLAN
1631[    1.099790] icnss: adc_tm_dev probe defer
1632[    1.101946] memshare_child soc:qcom,memshare:qcom,client_1: for memshare_GPS segments only will be dumped.
1633[    1.102023] memshare_child soc:qcom,memshare:qcom,client_2: for memshare_FTM segments only will be dumped.
1634[    1.102069] memshare_child soc:qcom,memshare:qcom,client_3: for memshare_DIAG segments only will be dumped.
1635[    1.103135] minidump-id not found for adsp
1636[    1.103589] minidump-id not found for cdsp
1637[    1.104033] minidump-id not found for ipa_fws
1638[    1.104042] subsys-pil-tz soc:qcom,ipa_fws: for ipa_fws segments only will be dumped.
1639[    1.104069] subsys-pil-tz soc:qcom,ipa_fws: for md_ipa_fws segments only will be dumped.
1640[    1.104383] minidump-id not found for venus
1641[    1.104396] subsys-pil-tz 5ae0000.qcom,venus: for venus segments only will be dumped.
1642[    1.104420] subsys-pil-tz 5ae0000.qcom,venus: for md_venus segments only will be dumped.
1643[    1.104736] minidump-id not found for a610_zap
1644[    1.104746] subsys-pil-tz soc:qcom,kgsl-hyp: for a610_zap segments only will be dumped.
1645[    1.104770] subsys-pil-tz soc:qcom,kgsl-hyp: for md_a610_zap segments only will be dumped.
1646[    1.108298] smp2p_sleepstate soc:qcom,smp2p_sleepstate: got smp2p-sleepstate-in irq 221
1647[    1.110816] msm_geni_serial 4a90000.qcom,qup_uart: Serial port0 added.FifoSize 64 is_console1
1648[    1.110869] 4a90000.qcom,qup_uart: ttyMSM0 at MMIO 0x4a90000 (irq = 87, base_baud = 0) is a MSM
1649[    1.111666] msm_geni_serial 4c90000.qcom,qup_uart: Wakeup byte 0xfd
1650[    1.111791] msm_geni_serial 4c90000.qcom,qup_uart: Serial port0 added.FifoSize 64 is_console0
1651[    1.112028] 4c90000.qcom,qup_uart: ttyHS0 at MMIO 0x4c90000 (irq = 91, base_baud = 0) is a MSM
1652[    1.112581] msm_geni_serial_init: Driver initialized
1653[    1.115729] random: crng init done
1654[    1.126881] dsi_phy 5e94400.qcom,mdss_dsi_phy0: 5e94400.qcom,mdss_dsi_phy0 supply gdsc not found, using dummy regulator
1655[    1.127050] msm-dsi-phy:[dsi_phy_driver_probe] Probe successful for dsi-phy-0
1656[    1.127786] drm_dsi_ctrl 5e94000.qcom,mdss_dsi_ctrl0: 5e94000.qcom,mdss_dsi_ctrl0 supply refgen not found, using dummy regulator
1657[    1.127878] AXI: get_pdata(): Error: Client name not found
1658[    1.127898] AXI: msm_bus_cl_get_pdata(): client has to provide missing entry for successful registration
1659[    1.127906] dsi-ctrl:[dsi_ctrl_dev_probe] Probe successful for dsi-ctrl-0
1660[    1.128513] msm-dsi-display:[dsi_display_parse_te_data] invalid vsync source selection
1661[    1.128523] OF: graph: no port node found in /soc/qcom,dsi-display
1662[    1.128565] msm-dsi-panel:[dsi_panel_parse_triggers:1436] [mipi_mot_vid_ds_1080p_630] fallback to default te-pin-select
1663[    1.128595] msm-dsi-panel:[dsi_panel_parse_qsync_caps:1629] [mipi_mot_vid_ds_1080p_630] qsync min fps not defined rc:-22
1664[    1.128604] msm-dsi-panel:[dsi_panel_get:3853] failed to parse qsync features, rc=-22
1665[    1.128643] msm-dsi-panel:[dsi_panel_parse_reset_sequence:2290] RESET SEQ LENGTH = 24
1666[    1.128689] msm-dsi-panel:[dsi_panel_parse_bl_config:2703] [mipi_mot_vid_ds_1080p_630] bl_2bytes_0xff0f_enable=0
1667[    1.128692] msm-dsi-panel:[dsi_panel_parse_bl_config:2709] [mipi_mot_vid_ds_1080p_630] bl_2bytes_enable=1
1668[    1.128713] msm-dsi-panel:[dsi_panel_parse_bl_config:2756] [mipi_mot_vid_ds_1080p_630]  bl_config: type=2, bl_max_level=4095, brightness_default_level=255, en_gpio=1277, hbm_en_gpio=1273, rc=-22
1669[    1.128719] msm-dsi-panel:[dsi_panel_parse_misc_features:2419] dsi_panel_parse_misc_features: ulps feature disabled
1670[    1.128721] msm-dsi-panel:[dsi_panel_parse_misc_features:2425] dsi_panel_parse_misc_features: ulps during suspend feature disabled
1671[    1.128761] msm-dsi-panel:[dsi_panel_parse_esd_config:3614] ESD enabled with mode: register_read
1672[    1.128767] msm-dsi-panel:[dsi_panel_parse_mot_panel_config:3718] dsi_panel_parse_mot_panel_config: disp_on_chk_val = 0x9d is defined
1673[    1.128795] msm-dsi-panel:[dsi_panel_parse_panel_cfg:1607] BL: panel(primary) =ds_hx83112a_fhd_vid, panel_id =0x00ff000092120403  panel_ver=0x00000000002a1183
1674[    1.128798] msm-dsi-panel:[dsi_panel_parse_panel_cfg:1610] BL: manufacture_id(0xDA) = 0x83 controller_ver(0xDB) = 0x11 controller_drv_ver(0XDC) = 0x2a
1675[    1.129914] iommu: Adding device 5e00000.qcom,mdss_mdp to group 8
1676[    1.131389] [drm:sde_dbg_init:5188] evtlog_status: enable:0, panic:1, dump:2
1677[    1.131434] msm_drm 5e00000.qcom,mdss_mdp: bound soc:qcom,wb-display@0 (ops sde_wb_comp_ops)
1678[    1.131823] msm-dsi-display:[dsi_display_bind] Successfully bind display panel 'dsi_hx83112a_ds_vid_display'
1679[    1.131828] msm-dsi-display:[dsi_display_register_te_irq] Unable to register for TE IRQ
1680[    1.131838] msm_drm 5e00000.qcom,mdss_mdp: bound soc:qcom,dsi-display (ops dsi_display_comp_ops)
1681[    1.131883] [drm] mapped mdp address space @ffffff800fe00000
1682[    1.131966] msm_drm 5e00000.qcom,mdss_mdp: failed to get memory resource: vbif_nrt_phys
1683[    1.132027] [drm:_sde_kms_get_splash_data:3182] splash mem num_regions:1
1684[    1.132049] [drm:_sde_kms_get_splash_data:3217] splash mem for disp:1 add:5c000000 size:f00000
1685[    1.132057] [sde_rsc:sde_rsc_client_create:90]: rsc not probed yet or not available
1686[    1.133723] [drm:sde_kms_hw_init:3343] sde hardware revision:0x50040000
1687[    1.134532] [drm] Created domain mdp_ns [80000000,80000000] secure=0
1688[    1.136106] iommu: Adding device 5e00000.qcom,mdss_mdp:qcom,smmu_sde_sec_cb to group 9
1689[    1.136137] [drm] probing device qcom,smmu_sde_sec
1690[    1.136143] [drm] Created domain mdp_s [80000000,80000000] secure=1
1691[    1.138336] [sde_rsc:is_sde_rsc_available:244]: rsc idx:0 not probed yet or not available
1692[    1.138382] [sde_rsc:sde_rsc_client_create:90]: rsc not probed yet or not available
1693[    1.138660] [sde_rsc:sde_rsc_client_create:90]: rsc not probed yet or not available
1694[    1.138725] [drm:reg_dmav1_init_sspp_op_v4] *ERROR* invalid feature map 12 for feature 31
1695[    1.138868] [drm:reg_dmav1_init_sspp_op_v4] *ERROR* invalid feature map 12 for feature 31
1696[    1.139614] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
1697[    1.139616] [drm] No driver support for vblank timestamp query.
1698[    1.140263] [drm] Initialized msm_drm 1.2.0 20130625 for 5e00000.qcom,mdss_mdp on minor 0
1699[    1.140355] msm-dsi-panel:[dsi_panel_parse_cmd_sets_sub:2213] [qcom,mdss-dsi-hbm-on-command-state] command state unrecognized-dsi_ls_mode
1700[    1.140364] msm-dsi-panel:[dsi_panel_parse_cmd_sets_sub:2213] [qcom,mdss-dsi-hbm-off-command-state] command state unrecognized-dsi_ls_mode
1701[    1.140382] msm-dsi-panel:[dsi_panel_parse_param_prop:3664] dsi_panel_parse_param_prop:  HBM from qcom,mdss-dsi-hbm-off-command
1702[    1.140388] msm-dsi-panel:[dsi_panel_parse_cmd_sets_sub:2213] [qcom,mdss-dsi-hbm-off-command-state] command state unrecognized-dsi_ls_mode
1703[    1.140393] msm-dsi-panel:[dsi_panel_parse_param_prop:3664] dsi_panel_parse_param_prop:  HBM from qcom,mdss-dsi-hbm-on-command
1704[    1.140398] msm-dsi-panel:[dsi_panel_parse_cmd_sets_sub:2213] [qcom,mdss-dsi-hbm-on-command-state] command state unrecognized-dsi_ls_mode
1705[    1.140403] msm-dsi-panel:[dsi_panel_parse_param_prop:3676] HBM: feature enabled.
1706[    1.140404] msm-dsi-panel:[dsi_panel_parse_param_prop:3664] dsi_panel_parse_param_prop:  CABC from qcom,mdss-dsi-cabc-ui-command
1707[    1.140408] msm-dsi-panel:[dsi_panel_parse_param_prop:3664] dsi_panel_parse_param_prop:  CABC from qcom,mdss-dsi-cabc-mv-command
1708[    1.140411] msm-dsi-panel:[dsi_panel_parse_param_prop:3664] dsi_panel_parse_param_prop:  CABC from qcom,mdss-dsi-cabc-dis-command
1709[    1.140414] msm-dsi-panel:[dsi_panel_parse_param_prop:3676] CABC: feature enabled.
1710[    1.140416] msm-dsi-panel:[dsi_panel_parse_param_prop:3664] dsi_panel_parse_param_prop:  ACL from qcom,mdss-dsi-acl-off-command
1711[    1.140419] msm-dsi-panel:[dsi_panel_parse_param_prop:3669] dsi_panel_parse_param_prop: panel param cmd ACL parsing failed
1712[    1.140423] msm-dsi-panel:[dsi_panel_parse_param_prop:3679] ACL: feature disabled.
1713[    1.140586] dsi-ctrl:[_dsi_ctrl_setup_isr] [DSI_0] IRQ 223 registered
1714[    1.160677] iommu: Adding device 59a0000.qcom,kgsl-iommu:gfx3d_user to group 10
1715[    1.160970] iommu: Adding device 59a0000.qcom,kgsl-iommu:gfx3d_secure to group 11
1716[    1.214816] brd: module loaded
1717[    1.218551] loop: module loaded
1718[    1.218690] zram: Added device: zram0
1719[    1.219934] QSEECOM: qseecom_probe: qseecom.qsee_version = 0x1401000
1720[    1.219948] QSEECOM: qseecom_retrieve_ce_data: Device does not support PFE
1721[    1.219953] QSEECOM: qseecom_probe: qseecom clocks handled by other subsystem
1722[    1.219956] QSEECOM: qseecom_probe: qseecom.qsee_reentrancy_support = 2
1723[    1.220142] QSEECOM: qseecom_probe: qseecom.whitelist_support = 1
1724[    1.221340] iommu: Adding device 1b20000.qcedev to group 12
1725[    1.224195] qce 1b20000.qcedev: QTI Crypto 5.5.0 device found @0x1b20000
1726[    1.224390] sps:BAM 0x0000000001b04000 is registered.
1727[    1.224550] sps:BAM 0x0000000001b04000 (va:0xffffff800ffc0000) enabled: ver:0x27, number of pipes:16
1728[    1.224763] QCE50: qce_sps_init:  QTI MSM CE-BAM at 0x0000000001b04000 irq 45
1729[    1.227691] iommu: Adding device 1b20000.qcrypto to group 13
1730[    1.229511] QCE50: __qce_get_device_tree_data: CE operating frequency is not defined, setting to default 100MHZ
1731[    1.230405] qcrypto 1b20000.qcrypto: QTI Crypto 5.5.0 device found @0x1b20000
1732[    1.230707] QCE50: qce_sps_init:  QTI MSM CE-BAM at 0x0000000001b04000 irq 45
1733[    1.231939] qcrypto 1b20000.qcrypto: qcrypto-ecb-aes
1734[    1.232093] qcrypto 1b20000.qcrypto: qcrypto-cbc-aes
1735[    1.232226] qcrypto 1b20000.qcrypto: qcrypto-ctr-aes
1736[    1.232349] qcrypto 1b20000.qcrypto: qcrypto-ecb-des
1737[    1.232473] qcrypto 1b20000.qcrypto: qcrypto-cbc-des
1738[    1.232594] qcrypto 1b20000.qcrypto: qcrypto-ecb-3des
1739[    1.232717] qcrypto 1b20000.qcrypto: qcrypto-cbc-3des
1740[    1.232839] qcrypto 1b20000.qcrypto: qcrypto-xts-aes
1741[    1.232973] qcrypto 1b20000.qcrypto: qcrypto-sha1
1742[    1.233100] qcrypto 1b20000.qcrypto: qcrypto-sha256
1743[    1.233226] qcrypto 1b20000.qcrypto: qcrypto-aead-hmac-sha1-cbc-aes
1744[    1.233370] qcrypto 1b20000.qcrypto: qcrypto-aead-hmac-sha1-cbc-des
1745[    1.233494] qcrypto 1b20000.qcrypto: qcrypto-aead-hmac-sha1-cbc-3des
1746[    1.233616] qcrypto 1b20000.qcrypto: qcrypto-aead-hmac-sha256-cbc-aes
1747[    1.233736] qcrypto 1b20000.qcrypto: qcrypto-aead-hmac-sha256-cbc-des
1748[    1.233857] qcrypto 1b20000.qcrypto: qcrypto-aead-hmac-sha256-cbc-3des
1749[    1.233989] qcrypto 1b20000.qcrypto: qcrypto-hmac-sha1
1750[    1.234117] qcrypto 1b20000.qcrypto: qcrypto-hmac-sha256
1751[    1.234247] qcrypto 1b20000.qcrypto: qcrypto-aes-ccm
1752[    1.234370] qcrypto 1b20000.qcrypto: qcrypto-rfc4309-aes-ccm
1753[    1.235202] qcom_ice_get_device_tree_data: No vdd-hba-supply regulator, assuming not needed
1754[    1.235928] SCSI Media Changer driver v0.25
1755[    1.237267] Ethernet Channel Bonding Driver: v3.7.1 (April 27, 2011)
1756[    1.238181] libphy: Fixed MDIO Bus: probed
1757[    1.238184] tun: Universal TUN/TAP device driver, 1.6
1758[    1.238219] PPP generic driver version 2.4.2
1759[    1.238252] PPP BSD Compression module registered
1760[    1.238253] PPP Deflate Compression module registered
1761[    1.238273] PPP MPPE Compression module registered
1762[    1.238276] NET: Registered protocol family 24
1763[    1.238379] CLD80211: Initializing
1764[    1.238445] usbcore: registered new interface driver r8152
1765[    1.238464] usbcore: registered new interface driver asix
1766[    1.238541] usbcore: registered new interface driver ax88179_178a
1767[    1.238552] usbcore: registered new interface driver cdc_ether
1768[    1.238561] usbcore: registered new interface driver net1080
1769[    1.238572] usbcore: registered new interface driver cdc_subset
1770[    1.238582] usbcore: registered new interface driver zaurus
1771[    1.238597] usbcore: registered new interface driver cdc_ncm
1772[    1.246087] msm_sharedmem: msm_sharedmem_probe: Device created for client 'rmtfs'
1773[    1.247637] msm-qusb-phy 1613000.qusb: 1613000.qusb supply USB3_GDSC not found, using dummy regulator
1774[    1.249298] msm-dwc3 4e00000.ssusb: USB core frequency = 133333333
1775[    1.249415] msm-dwc3 4e00000.ssusb: setting lpm_to_suspend_delay to zero.
1776[    1.250501] msm-dwc3 4e00000.ssusb: DWC3_GSI_EVT_BUF_ALLOC
1777[    1.250755] dwc3 4e00000.dwc3: changing max_speed on rev 00000000
1778[    1.253937] msm-dwc3 4e00000.ssusb: setting pm-qos-latency to zero.
1779[    1.253956] Invalid index Defaulting curr to 0
1780[    1.254845] msm-dwc3 4e00000.ssusb: DWC3_GSI_EVT_BUF_FREE
1781[    1.256316] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
1782[    1.256320] ehci-pci: EHCI PCI platform driver
1783[    1.256334] ehci-platform: EHCI generic platform driver
1784[    1.256740] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
1785[    1.256764] ohci-pci: OHCI PCI platform driver
1786[    1.256790] ohci-platform: OHCI generic platform driver
1787[    1.257504] usbcore: registered new interface driver uas
1788[    1.257526] usbcore: registered new interface driver usb-storage
1789[    1.257537] usbcore: registered new interface driver usb_ehset_test
1790[    1.257547] usbcore: registered new interface driver lvs
1791[    1.258923] qcom,qpnp-rtc 1c40000.qcom,spmi:qcom,pm6125@0:qcom,pm6125_rtc: rtc core: registered qpnp_rtc as rtc0
1792[    1.259186] i2c /dev entries driver
1793[    1.260896] i2c_geni 4a8c000.i2c: Bus frequency not specified, default to 400KHz.
1794[    1.261107] nq-nci 0-0028: ese GPIO <OPTIONAL> error getting from OF node
1795[    1.261149] nq-nci 0-0028: nqx_probe: ese gpio not provided
1796[    1.261524] IR NEC protocol handler initialized
1797[    1.261527] IR RC5(x/sz) protocol handler initialized
1798[    1.261529] IR RC6 protocol handler initialized
1799[    1.261530] IR JVC protocol handler initialized
1800[    1.261532] IR Sony protocol handler initialized
1801[    1.261533] IR SANYO protocol handler initialized
1802[    1.261535] IR Sharp protocol handler initialized
1803[    1.261536] IR MCE Keyboard/mouse protocol handler initialized
1804[    1.261537] IR XMP protocol handler initialized
1805[    1.262154] sde_mdp_parse_dt_prop_len: <SDEROT_INFO> prop qcom,mdss-rot-vbif-memtype : doesn't exist in device tree
1806[    1.262162] sde_mdp_parse_dt_prop_len: <SDEROT_INFO> prop qcom,mdss-inline-rot-qos-lut : doesn't exist in device tree
1807[    1.262165] sde_mdp_parse_dt_prop_len: <SDEROT_INFO> prop qcom,mdss-inline-rot-danger-lut : doesn't exist in device tree
1808[    1.262167] sde_mdp_parse_dt_prop_len: <SDEROT_INFO> prop qcom,mdss-inline-rot-safe-lut : doesn't exist in device tree
1809[    1.262268] register_client_adhoc:Failed to find path.src 1 dest 590
1810[    1.262270] sde_mdp_bus_scale_register: <SDEROT_WARN> reg_bus_client register failed
1811[    1.263337] No change in context(0==0), skip
1812[    1.264656] sde_rotator_evtlog_create_debugfs: evtlog_status: enable:1, panic:1, dump:2
1813[    1.266140] sde_rotator 5e00000.qcom,mdss_rotator: <SDEROT_INFO> SDE v4l2 rotator probe success
1814[    1.267503] iommu: Adding device 5e00000.qcom,mdss_rotator:qcom,smmu_rot_unsec_cb to group 14
1815[    1.267568] sde_smmu_probe: <SDEROT_INFO> iommu v2 domain[0] mapping and clk register successful!
1816[    1.268699] iommu: Adding device 5e00000.qcom,mdss_rotator:qcom,smmu_rot_sec_cb to group 15
1817[    1.268727] sde_smmu_probe: <SDEROT_INFO> iommu v2 domain[1] mapping and clk register successful!
1818[    1.270664] iommu: Adding device 5a00000.qcom,vidc:non_secure_cb to group 16
1819[    1.271161] iommu: Adding device 5a00000.qcom,vidc:secure_bitstream_cb to group 17
1820[    1.272587] iommu: Adding device 5a00000.qcom,vidc:secure_pixel_cb to group 18
1821[    1.273665] iommu: Adding device 5a00000.qcom,vidc:secure_non_pixel_cb to group 19
1822[    1.275552] iommu: Adding device soc:qcom,cam_smmu:msm_cam_smmu_cb1 to group 20
1823[    1.275577] CAM-SMMU cam_smmu_populate_sids:2121 __debug cnt = 6, cb->name: :vfe sid [0] = 1056
1824[    1.275577] ,
1825[    1.275580] CAM-SMMU cam_smmu_populate_sids:2121 __debug cnt = 6, cb->name: :vfe sid [1] = 1057
1826[    1.275580] ,
1827[    1.276097] iommu: Adding device soc:qcom,cam_smmu:msm_cam_smmu_cb2 to group 21
1828[    1.276119] CAM-SMMU cam_smmu_populate_sids:2121 __debug cnt = 3, cb->name: :cpp sid [0] = 2048
1829[    1.276119] ,
1830[    1.276535] iommu: Adding device soc:qcom,cam_smmu:msm_cam_smmu_cb4 to group 22
1831[    1.276558] CAM-SMMU cam_smmu_populate_sids:2121 __debug cnt = 3, cb->name: :jpeg_enc0 sid [0] = 2080
1832[    1.276558] ,
1833[    1.276991] iommu: Adding device soc:qcom,cam_smmu:msm_cam_smmu_cb5 to group 23
1834[    1.277012] CAM-SMMU cam_smmu_populate_sids:2121 __debug cnt = 3, cb->name: :jpeg_dma sid [0] = 2081
1835[    1.277012] ,
1836[    1.282767] msm_actuator_platform_probe:2085 msm_actuator_platform_probe: No/Error Actuator GPIOs
1837[    1.283266] msm_eeprom_platform_probe failed 1803
1838[    1.283488] msm_eeprom_platform_probe failed 1803
1839[    1.283677] msm_eeprom_platform_probe failed 1803
1840[    1.283844] msm_eeprom_platform_probe failed 1803
1841[    1.284425] msm_camera_get_dt_vreg_data:1125 number of entries is 0 or not present in dts
1842[    1.289886] MSM-CPP cpp_init_hardware:1135 CPP HW Version: 0x60010004
1843[    1.289897] MSM-CPP cpp_init_hardware:1153 stream_cnt:0
1844[    1.290765] MSM-CPP cpp_release_hardware:1216 cpp hw release done
1845[    1.291704] CAM-SOC msm_camera_get_reg_base:894 err: mem resource vfe_fuse not found
1846[    1.291714] CAM-SOC msm_camera_get_res_size:937 err: mem resource vfe_fuse not found
1847[    1.291819] i2c_geni 4a84000.i2c: i2c error :-107
1848[    1.291838] nq-nci 0-0028: nfcc_hw_check: - i2c_master_send core reset Error
1849[    1.292365] CAM-SOC msm_camera_get_reg_base:894 err: mem resource vfe_fuse not found
1850[    1.292372] CAM-SOC msm_camera_get_res_size:937 err: mem resource vfe_fuse not found
1851[    1.294811] __msm_jpeg_init:1595] Jpeg Device id 0
1852[    1.297038] Couldn't parse device tree rc=-517
1853[    1.306543] bcl_soc:bcl_soc_probe soc TZ register failed. err:-19
1854[    1.307760] device-mapper: uevent: version 1.0.3
1855[    1.307859] device-mapper: ioctl: 4.37.0-ioctl (2017-09-20) initialised: dm-devel@redhat.com
1856[    1.308385] bt_dt_parse_vreg_info: qca,bt-vdd-vl: is not provided in device tree
1857[    1.308388] bt_dt_parse_vreg_info: qca,bt-vdd-vm: is not provided in device tree
1858[    1.308390] bt_dt_parse_vreg_info: qca,bt-vdd-5c: is not provided in device tree
1859[    1.308392] bt_dt_parse_vreg_info: qca,bt-vdd-vh: is not provided in device tree
1860[    1.308404] bt_dt_parse_vreg_info: qca,bt-vdd-ldo: is not provided in device tree
1861[    1.308406] bt_dt_parse_vreg_info: qca,bt-chip-pwd: is not provided in device tree
1862[    1.308409] bt_power_populate_dt_pinfo: bt-reset-gpio not provided in device tree
1863[    1.308418] bt_dt_parse_clk_info: clocks is not provided in device tree
1864[    1.308422] bt_power_populate_dt_pinfo: clock not provided in device tree
1865[    1.309291] sdhci: Secure Digital Host Controller Interface driver
1866[    1.309294] sdhci: Copyright(c) Pierre Ossman
1867[    1.309295] sdhci-pltfm: SDHCI platform and OF driver helper
1868[    1.310385] usbcore: registered new interface driver usbhid
1869[    1.310388] usbhid: USB HID core driver
1870[    1.310474] ashmem: initialized
1871[    1.311524] ipa_ut ipa_ut_module_init:1043 Loading IPA test module...
1872[    1.311633] qcom_ice_get_pdevice: found ice device fffffffc6fd58400
1873[    1.311638] qcom_ice_get_pdevice: matching platform device fffffffc7a380000
1874[    1.315584] qcom_ice 4748000.sdcc1ice: QC ICE 3.1.79 device found @0xffffff8010120000
1875[    1.316792] mmc0: SDHCI controller on 4744000.sdhci [4744000.sdhci] using 64-bit ADMA in CMDQ mode
1876[    1.322405] i2c_geni 4a84000.i2c: i2c error :-107
1877[    1.322425] nq-nci 0-0028: nfcc_hw_check: - i2c_master_send get version cmd Error
1878[    1.322432] nq-nci 0-0028: nfcc_hw_check: - NFCC HW not available
1879[    1.322479] nq-nci 0-0028: nqx_probe: probing NFCC NQxxx exited successfully
1880[    1.383488] mmc0: Out-of-interrupt timeout is 100[ms]
1881[    1.383493] mmc0: eMMC FW version: 0x04
1882[    1.383495] mmc0: CMDQ supported: depth: 32
1883[    1.395145] cmdq_host_alloc_tdl: desc_size: 1024 data_sz: 63488 slot-sz: 32
1884[    1.395743] mmc0: CMDQ enabled on card
1885[    1.395759] mmc0: new HS400 Enhanced strobe MMC card at address 0001
1886[    1.396618] sdhci_msm_pm_qos_cpu_init (): voted for group #0 (mask=0xf) latency=-1
1887[    1.396622] sdhci_msm_pm_qos_cpu_init (): voted for group #1 (mask=0xf0) latency=-1
1888[    1.396743] mmcblk0: mmc0:0001 S0J9K8 58.2 GiB
1889[    1.396958] mmcblk0rpmb: mmc0:0001 S0J9K8 partition 3 16.0 MiB
1890[    1.399202]  mmcblk0: p1 p2 p3 p4 p5 p6 p7 p8 p9 p10 p11 p12 p13 p14 p15 p16 p17 p18 p19 p20 p21 p22 p23 p24 p25 p26 p27 p28 p29 p30 p31 p32 p33 p34 p35 p36 p37 p38 p39 p40 p41 p42 p43 p44 p45 p46 p47 p48 p49 p50 p51 p52 p53 p54 p55 p56 p57 p58 p59 p60 p61 p62 p63 p64 p65 p66 p67 p68 p72 p73 p74 p75 p76 p77 p78 p79 p80
1891[    1.405169] sdhci_msm 4784000.sdhci: sdhci_msm_probe: ICE device is not enabled
1892[    1.420458] mmc1: SDHCI controller on 4784000.sdhci [4784000.sdhci] using 64-bit ADMA in legacy mode
1893[    1.455030] bimc-bwmon 1b8e200.qcom,cpu-cpu-ddr-bwmon: BW HWmon governor registered.
1894[    1.457025] arm-memlat-mon soc:qcom,cpu0-cpu-ddr-latmon: Memory Latency governor registered.
1895[    1.458104] arm-memlat-mon soc:qcom,cpu4-cpu-ddr-latmon: Memory Latency governor registered.
1896[    1.459162] arm-memlat-mon soc:qcom,cpu0-computemon: Compute governor registered.
1897[    1.460277] arm-memlat-mon soc:qcom,cpu4-computemon: Compute governor registered.
1898[    1.471555] usbcore: registered new interface driver snd-usb-audio
1899[    1.471669] iommu: Adding device soc:usb_audio_qmi_dev to group 24
1900[    1.472727] GACT probability NOT on
1901[    1.472736] Mirror/redirect action on
1902[    1.472740] u32 classifier
1903[    1.472740]     Actions configured
1904[    1.472746] Netfilter messages via NETLINK v0.30.
1905[    1.472814] nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
1906[    1.472860] ctnetlink v0.93: registering with nfnetlink.
1907[    1.473002] xt_time: kernel timezone is -0000
1908[    1.473051] IPv4 over IPsec tunneling driver
1909[    1.473232] ip_tables: (C) 2000-2006 Netfilter Core Team
1910[    1.473514] arp_tables: arp_tables: (C) 2002 David S. Miller
1911[    1.473574] Initializing XFRM netlink socket
1912[    1.473676] NET: Registered protocol family 10
1913[    1.474158] Segment Routing with IPv6
1914[    1.474183] mip6: Mobile IPv6
1915[    1.474189] ip6_tables: (C) 2000-2006 Netfilter Core Team
1916[    1.474504] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver
1917[    1.474752] NET: Registered protocol family 17
1918[    1.474758] NET: Registered protocol family 15
1919[    1.474767] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this.
1920[    1.474769] Ebtables v2.0 registered
1921[    1.474832] l2tp_core: L2TP core driver, V2.0
1922[    1.474836] l2tp_ppp: PPPoL2TP kernel driver, V2.0
1923[    1.474837] l2tp_ip: L2TP IP encapsulation support (L2TPv3)
1924[    1.474843] l2tp_netlink: L2TP netlink interface
1925[    1.474852] l2tp_eth: L2TP ethernet pseudowire support (L2TPv3)
1926[    1.474853] l2tp_ip6: L2TP IP encapsulation support for IPv6 (L2TPv3)
1927[    1.474889] sctp: Hash tables configured (bind 256/256)
1928[    1.475226] icnss: Recursive recovery allowed for WLAN
1929[    1.475230] icnss: adc_tm_dev probe defer
1930[    1.475562] msm-dwc3 4e00000.ssusb: USB core frequency = 133333333
1931[    1.475577] msm-dwc3 4e00000.ssusb: setting lpm_to_suspend_delay to zero.
1932[    1.476185] msm-dwc3 4e00000.ssusb: DWC3_GSI_EVT_BUF_ALLOC
1933[    1.476421] dwc3 4e00000.dwc3: changing max_speed on rev 00000000
1934[    1.478708] sps:BAM 0x0000000004f04000 is registered.
1935[    1.479099] msm-dwc3 4e00000.ssusb: setting pm-qos-latency to zero.
1936[    1.479110] Invalid index Defaulting curr to 0
1937[    1.479774] msm-dwc3 4e00000.ssusb: DWC3_GSI_EVT_BUF_FREE
1938[    1.480511] QG-K: qg_parse_dt: PMIC subtype 37 Digital major 2
1939[    1.480540] QG-K: qg_parse_dt: DT: S2 FIFO length=5 low_vbat_length=2 acc_length=128 acc_interval=100
1940[    1.480543] QG-K: qg_parse_dt: DT: OCV timer_expiry =-22min ocv_tol_threshold=-22uV
1941[    1.480564] QG-K: qg_parse_dt: DT: cl_min_start_soc=0 cl_max_start_soc=5 cl_min_temp=150 cl_max_temp=450
1942[    1.480565] QG-K: qg_parse_dt: DT: vbatt_empty_mv=2800mV vbatt_low_mv=3500mV delta_soc=1 ext-sns=0
1943[    1.480575] QG-K: qg_set_wa_flags: wa_flags = 2
1944[    1.480607] QG-K: qg_master_hold: Master hold = 1
1945[    1.480784] QG-K: qg_master_hold: Master hold = 0
1946[    1.493123] QG-K: qg_vbat_thresholds_config: VBAT EMPTY threshold updated to 2800mV temp=213
1947[    1.493142] QG-K: qg_vbat_thresholds_config: VBAT LOW threshold updated to 3500mV temp=213
1948[    1.494359] get_battery_serialnumber: Battsn = SB18C52857
1949[    1.494366] get_profile_by_serialnumber: Default Serial Number SB18C52857
1950[    1.494370] get_profile_by_serialnumber: Battery Match Found using qcom,kd40-atl-4000mah
1951[    1.494538] QG-K: qg_batterydata_init: QG Battery-profile loaded, '/dev/qg_battery' created!
1952[    1.494592] QG-K: qg_sanitize_sdam: SDAM valid
1953[    1.494684] QG-K: qg_determine_pon_soc: S7_PON_OCV OCV=4386728
1954[    1.494694] QG-K: qg_determine_pon_soc: S3_GOOD_OCV OCV=6377865
1955[    1.494704] QG-K: qg_determine_pon_soc: S3_LAST_OCV OCV=6377865
1956[    1.494714] QG-K: qg_determine_pon_soc: SDAM_PON_OCV OCV=4386534
1957[    1.495801] QG-K: qg_determine_pon_soc: Shutdown: Valid=1 SOC=100 OCV=4391594uV time=77563secs temp=222, time_now=133958secs temp_now=213 S7_soc=100
1958[    1.495805] QG-K: qg_determine_pon_soc: v_float=4400000 v_cutoff=3200000 FULL_SOC=99 CUTOFF_SOC=1 PON_SYS_SOC=100 pon_soc=100
1959[    1.496785] QG-K: qg_store_soc_params: SDAM write param 0 value=1
1960[    1.496795] QG-K: qg_store_soc_params: SDAM write param 1 value=100
1961[    1.496804] QG-K: qg_store_soc_params: SDAM write param 2 value=213
1962[    1.496814] QG-K: qg_store_soc_params: SDAM write param 3 value=0
1963[    1.496826] QG-K: qg_store_soc_params: SDAM write param 4 value=4386728
1964[    1.496838] QG-K: qg_store_soc_params: SDAM write param 5 value=0
1965[    1.496850] QG-K: qg_store_soc_params: SDAM write param 6 value=133958
1966[    1.496851] QG-K: qg_determine_pon_soc: using S7_PON_SOC @ PON ocv_uv=4386728uV soc=100
1967[    1.496991] (NULL device *): hwmon_device_register() is deprecated. Please convert the driver to use hwmon_device_register_with_info().
1968[    1.497237] QG-K: qg_request_interrupt: IRQ qg-vbat-low registered wakeable=1
1969[    1.497385] QG-K: qg_request_interrupt: IRQ qg-vbat-empty registered wakeable=1
1970[    1.497614] QG-K: qg_request_interrupt: IRQ qg-fifo-done registered wakeable=1
1971[    1.497762] QG-K: qg_request_interrupt: IRQ qg-good-ocv registered wakeable=1
1972[    1.497775] QG-K: qg_retrieve_esr_params: ESR_CHARGE_DELTA SDAM=-5
1973[    1.497788] QG-K: qg_retrieve_esr_params: ESR_DISCHARGE_DELTA SDAM=-5
1974[    1.497798] QG-K: qg_retrieve_esr_params: ESR_CHARGE_SF SDAM=9561
1975[    1.497808] QG-K: qg_retrieve_esr_params: ESR_DISCHARGE_SF SDAM=9561
1976[    1.497828] QG-K: qpnp_qg_probe: QG initialized! battery_profile=KD40-ATL-4000mah SOC=100 QG_subtype=3
1977[    1.507147] get_battery_serialnumber: Battsn = SB18C52857
1978[    1.507154] get_profile_by_serialnumber: Default Serial Number SB18C52857
1979[    1.507158] get_profile_by_serialnumber: Battery Match Found using qcom,kd40-atl-4000mah
1980[    1.507162] pmi632_charger: jeita_update_work: Couldn't get fcc values for soft JEITA rc=-22
1981[    1.515110] power_supply bms: driver failed to report `cc_soc' property: -22
1982[    1.550238] pmi632_charger: smblib_request_dpdm: enabling DPDM regulator
1983[    1.550817] pmi632_charger: smblib_rerun_apsd: re-running APSD
1984[    1.551258] (NULL device *): hwmon_device_register() is deprecated. Please convert the driver to use hwmon_device_register_with_info().
1985[    1.551336] pmi632_charger: smblib_usb_plugin_locked: IRQ: usbin-plugin attached
1986[    1.551338] pmi632_charger: typec_attach_detach_irq_handler: IRQ: determine-initial-status
1987[    1.551385] pmi632_charger: typec_state_change_irq_handler: IRQ: cc-state-change; Type-C NONE detected
1988[    1.551395] pmi632_charger: usb_source_change_irq_handler: APSD_STATUS = 0x00
1989[    1.551397] pmi632_charger: smblib_handle_hvdcp_detect_done: IRQ: hvdcp-detect-done falling
1990[    1.551399] pmi632_charger: smblib_handle_hvdcp_check_timeout: IRQ: smblib_handle_hvdcp_check_timeout falling
1991[    1.551400] pmi632_charger: smblib_handle_sdp_enumeration_done: IRQ: sdp-enumeration-done falling
1992[    1.551401] pmi632_charger: smblib_handle_slow_plugin_timeout: IRQ: slow-plugin-timeout falling
1993[    1.551412] pmi632_charger: usb_source_change_irq_handler: APSD_STATUS = 0x00
1994[    1.551413] pmi632_charger: chg_state_change_irq_handler: IRQ: determine-initial-status
1995[    1.551442] pmi632_charger: batt_temp_changed_irq_handler: IRQ: determine-initial-status
1996[    1.551443] pmi632_charger: wdog_bark_irq_handler: IRQ: determine-initial-status
1997[    1.551453] pmi632_charger: typec_or_rid_detection_change_irq_handler: IRQ: determine-initial-status
1998[    1.551455] pmi632_charger: wdog_snarl_irq_handler: IRQ: determine-initial-status
1999[    1.551972] batt power supply prop 4 not supported
2000[    1.552503] pmi632_charger: smblib_run_aicl: re-running AICL
2001[    1.556361] pmi632_charger: smblib_run_aicl: re-running AICL
2002[    1.556446] SMB5 status - usb:present=1 type=0 batt:present = 1 health = 1 charge = 1
2003[    1.556454] QPNP SMB5 probed successfully
2004[    1.556830] Error registering TZ zone:-19 for dt_ch:82
2005[    1.578021] batt power supply prop 4 not supported
2006[    1.584618] Error registering TZ zone:-19 for dt_ch:84
2007[    1.584673] icnss: Recursive recovery allowed for WLAN
2008[    1.585219] icnss c800000.qcom,icnss: for wcss_msa0 segments only will be dumped.
2009[    1.585274] icnss: Platform driver probed successfully
2010[    1.585495] msm-dwc3 4e00000.ssusb: USB core frequency = 133333333
2011[    1.585513] msm-dwc3 4e00000.ssusb: setting lpm_to_suspend_delay to zero.
2012[    1.586221] msm-dwc3 4e00000.ssusb: DWC3_GSI_EVT_BUF_ALLOC
2013[    1.586460] dwc3 4e00000.dwc3: changing max_speed on rev 00000000
2014[    1.588753] sps:BAM 0x0000000004f04000 is registered.
2015[    1.589135] msm-dwc3 4e00000.ssusb: setting pm-qos-latency to zero.
2016[    1.589633] i2c_geni 4a84000.i2c: i2c error :-107
2017[    1.589710] i2c_geni 4a84000.i2c: i2c error :-107
2018[    1.589785] i2c_geni 4a84000.i2c: i2c error :-107
2019[    1.589860] i2c_geni 4a84000.i2c: i2c error :-107
2020[    1.589934] i2c_geni 4a84000.i2c: i2c error :-107
2021[    1.590008] i2c_geni 4a84000.i2c: i2c error :-107
2022[    1.590103] i2c_geni 4a84000.i2c: i2c error :-107
2023[    1.590178] i2c_geni 4a84000.i2c: i2c error :-107
2024[    1.590253] i2c_geni 4a84000.i2c: i2c error :-107
2025[    1.590327] i2c_geni 4a84000.i2c: i2c error :-107
2026[    1.590873] core_ctl: Creating CPU group 0
2027[    1.590875] core_ctl: Init CPU0 state
2028[    1.590876] core_ctl: Init CPU1 state
2029[    1.590877] core_ctl: Init CPU2 state
2030[    1.590878] core_ctl: Init CPU3 state
2031[    1.591024] core_ctl: Creating CPU group 4
2032[    1.591025] core_ctl: Init CPU4 state
2033[    1.591026] core_ctl: Init CPU5 state
2034[    1.591027] core_ctl: Init CPU6 state
2035[    1.591028] core_ctl: Init CPU7 state
2036[    1.591208] registered taskstats version 1
2037[    1.591210] Loading compiled-in X.509 certificates
2038[    1.592940] Loaded X.509 cert 'Build time autogenerated kernel key: 9dd606ebf61890866bd6ae82766bf11e1603e7ec'
2039[    1.592951] page_owner is disabled
2040[    1.653131] ADSPRPC: Secure VMID = 22
2041[    1.653135] ADSPRPC: Secure VMID = 37
2042[    1.653524] iommu: Adding device soc:qcom,msm_fastrpc:qcom,msm_fastrpc_compute_cb1 to group 25
2043[    1.653974] iommu: Adding device soc:qcom,msm_fastrpc:qcom,msm_fastrpc_compute_cb2 to group 26
2044[    1.654326] iommu: Adding device soc:qcom,msm_fastrpc:qcom,msm_fastrpc_compute_cb3 to group 27
2045[    1.654657] iommu: Adding device soc:qcom,msm_fastrpc:qcom,msm_fastrpc_compute_cb4 to group 28
2046[    1.654992] iommu: Adding device soc:qcom,msm_fastrpc:qcom,msm_fastrpc_compute_cb5 to group 29
2047[    1.655327] iommu: Adding device soc:qcom,msm_fastrpc:qcom,msm_fastrpc_compute_cb6 to group 30
2048[    1.655663] iommu: Adding device soc:qcom,msm_fastrpc:qcom,msm_fastrpc_compute_cb9 to group 31
2049[    1.656714] iommu: Adding device soc:qcom,msm_fastrpc:qcom,msm_fastrpc_compute_cb10 to group 32
2050[    1.658357] iommu: Adding device a340000.slim:qcom,iommu_slim_ctrl_cb to group 33
2051[    1.659667] input: gpio-keys as /devices/platform/soc/soc:gpio_keys/input/input1
2052[    1.659830] qcom,qpnp-rtc 1c40000.qcom,spmi:qcom,pm6125@0:qcom,pm6125_rtc: setting system clock to 1970-01-02 13:12:39 UTC (133959)
2053[    1.661106] lpm_levels: register_cluster_lpm_stats()
2054[    1.661189] lpm_levels: register_cluster_lpm_stats()
2055[    1.663588] rmnet_ipa3 started initialization
2056[    1.663875] RNDIS_IPA module is loaded.
2057[    1.667270] ufs_phy_gdsc: disabling
2058[    1.667279] usb30_prim_gdsc: disabling
2059[    1.667295] dbu1: disabling
2060[    1.667310] regulator_proxy_consumer_remove_all: removing regulator proxy consumer requests
2061[    1.667352] ALSA device list:
2062[    1.667354]   No soundcards found.
2063[    1.667382] Warning: unable to open an initial console.
2064[    1.668221] Freeing unused kernel memory: 4096K
2065[    1.671129] init: init first stage started!
2066[    1.671141] init: First stage mount skipped (recovery mode)
2067[    1.671269] init: Using Android DT directory /proc/device-tree/firmware/android/
2068[    1.671918] init: [libfs_mgr]Unknown file contents encryption mode: ice
2069[    1.675931] pmi632_charger: typec_state_change_irq_handler: IRQ: cc-state-change; Type-C SOURCE_DEFAULT detected
2070[    1.675934] pmi632_charger: typec_attach_detach_irq_handler: IRQ: typec-attach-detach
2071[    1.699606] pmi632_charger: default_irq_handler: IRQ: usbin-collapse
2072[    1.716842] init: [libfs_mgr]Returning avb_handle with status: 0
2073[    1.716989] init: Loading SELinux policy
2074[    1.719120] SELinux: 8192 avtab hash slots, 16624 rules.
2075[    1.722687] pmi632_charger: default_irq_handler: IRQ: aicl-done
2076[    1.722689] pmi632_charger: default_irq_handler: IRQ: usbin-collapse
2077[    1.722803] SELinux: 8192 avtab hash slots, 16624 rules.
2078[    1.722809] SELinux:  1 users, 2 roles, 1327 types, 0 bools, 1 sens, 1024 cats
2079[    1.722812] SELinux:  93 classes, 16624 rules
2080[    1.724143] SELinux:  Class process2 not defined in policy.
2081[    1.724382] SELinux:  Class infiniband_pkey not defined in policy.
2082[    1.724383] SELinux:  Class infiniband_endport not defined in policy.
2083[    1.724387] SELinux: the above unknown classes and permissions will be denied
2084[    1.724400] SELinux:  policy capability network_peer_controls=1
2085[    1.724402] SELinux:  policy capability open_perms=1
2086[    1.724403] SELinux:  policy capability extended_socket_class=1
2087[    1.724404] SELinux:  policy capability always_check_network=0
2088[    1.724405] SELinux:  policy capability cgroup_seclabel=0
2089[    1.724406] SELinux:  policy capability nnp_nosuid_transition=0
2090[    1.724430] SELinux:  Completing initialization.
2091[    1.724431] SELinux:  Setting up existing superblocks.
2092[    1.765576] pmi632_charger: default_irq_handler: IRQ: usbin-collapse
2093[    1.768609] audit: type=1403 audit(133959.606:2): policy loaded auid=4294967295 ses=4294967295
2094[    1.768714] selinux: SELinux: Loaded policy from /sepolicy
2095[    1.768714]
2096[    1.769995] selinux: SELinux: Loaded file_contexts
2097[    1.769995]
2098[    1.771920] init: init second stage started!
2099[    1.775923] init: Using Android DT directory /proc/device-tree/firmware/android/
2100[    1.777601] selinux: SELinux: Loaded file_contexts
2101[    1.777601]
2102[    1.777611] init: Running restorecon...
2103[    1.780342] pmi632_charger: usbin_uv_irq_handler: IRQ: usbin-uv
2104[    1.781217] init: waitid failed: No child processes
2105[    1.781263] init: Couldn't load property file '/system/etc/prop.default': open() failed: No such file or directory: No such file or directory
2106[    1.781785] init: Unable to set property 'ro.build.version.release' to '9' in property file '/prop.default': Read-only property was already set
2107[    1.781800] init: Unable to set property 'ro.build.version.security_patch' to '2099-12-31' in property file '/prop.default': Read-only property was already set
2108[    1.781959] init: Couldn't load property file '/product/build.prop': open() failed: No such file or directory: No such file or directory
2109[    1.781973] init: Couldn't load property file '/odm/default.prop': open() failed: No such file or directory: No such file or directory
2110[    1.781984] init: Couldn't load property file '/vendor/default.prop': open() failed: No such file or directory: No such file or directory
2111[    1.782191] init: Created socket '/dev/socket/property_service', mode 666, user 0, group 0
2112[    1.782769] init: Forked subcontext for 'u:r:vendor_init:s0' with pid 421
2113[    1.783123] init: Forked subcontext for 'u:r:vendor_init:s0' with pid 422
2114[    1.783179] init: Parsing file /init.rc...
2115[    1.783238] init: Added '/init.recovery.logd.rc' to import list
2116[    1.783245] init: Added '/init.recovery.ldconfig.rc' to import list
2117[    1.783250] init: Added '/init.recovery.mksh.rc' to import list
2118[    1.783254] init: Added '/init.recovery.usb.rc' to import list
2119[    1.783258] init: Added '/init.recovery.service.rc' to import list
2120[    1.783266] init: Added '/init.recovery.vold_decrypt.rc' to import list
2121[    1.783275] init: Added '/init.recovery.qcom.rc' to import list
2122[    1.783397] init: /init.rc: 15: Invalid keyword 'setcon'
2123[    1.783498] init: /init.rc: 64: Invalid keyword 'load_all_props'
2124[    1.783534] init: /init.rc: 102: Invalid keyword 'powerctl'
2125[    1.783588] init: Parsing file /init.recovery.logd.rc...
2126[    1.783633] init: Parsing file /init.recovery.ldconfig.rc...
2127[    1.783656] init: Parsing file /init.recovery.mksh.rc...
2128[    1.783674] init: Parsing file /init.recovery.usb.rc...
2129[    1.783832] init: Parsing file /init.recovery.service.rc...
2130[    1.783858] init: Parsing file /init.recovery.vold_decrypt.rc...
2131[    1.783870] init: Unable to read config file '/init.recovery.vold_decrypt.rc': open() failed: No such file or directory
2132[    1.783880] init: /init.rc: 6: Could not import file '/init.recovery.vold_decrypt.rc': No such file or directory
2133[    1.783889] init: Parsing file /init.recovery.qcom.rc...
2134[    1.784028] init: /init.recovery.qcom.rc: 104: ignored duplicate definition of service 'logd'
2135[    1.784120] init: Parsing file /system/etc/init...
2136[    1.784131] init: Unable to read config file '/system/etc/init': open() failed: No such file or directory
2137[    1.784147] init: Parsing file /product/etc/init...
2138[    1.784157] init: Unable to read config file '/product/etc/init': open() failed: No such file or directory
2139[    1.784168] init: Parsing file /odm/etc/init...
2140[    1.784178] init: Unable to read config file '/odm/etc/init': open() failed: No such file or directory
2141[    1.784192] init: Parsing file /vendor/etc/init...
2142[    1.784202] init: Unable to read config file '/vendor/etc/init': open() failed: No such file or directory
2143[    1.784234] init: processing action (early-init) from (/init.rc:9)
2144[    1.784615] audit: type=1400 audit(133959.623:3): avc:  denied  { setcheckreqprot } for  pid=1 comm="init" scontext=u:r:init:s0 tcontext=u:object_r:kernel:s0 tclass=security permissive=1
2145[    1.784701] init: starting service 'ueventd'...
2146[    1.785196] audit: type=1400 audit(133959.623:4): avc:  denied  { dac_read_search } for  pid=1 comm="init" capability=2  scontext=u:r:init:s0 tcontext=u:r:init:s0 tclass=capability permissive=1
2147[    1.785228] audit: type=1400 audit(133959.623:5): avc:  denied  { create } for  pid=1 comm="init" name="cgroup.procs" scontext=u:r:init:s0 tcontext=u:object_r:rootfs:s0 tclass=file permissive=1
2148[    1.785253] audit: type=1400 audit(133959.623:6): avc:  denied  { write } for  pid=1 comm="init" path="/acct/uid_0/pid_423/cgroup.procs" dev="rootfs" ino=18360 scontext=u:r:init:s0 tcontext=u:object_r:rootfs:s0 tclass=file permissive=1
2149[    1.785337] init: processing action (early-init) from (/init.recovery.qcom.rc:143)
2150[    1.785381] audit: type=1400 audit(133959.623:7): avc:  denied  { sys_module } for  pid=1 comm="init" capability=16  scontext=u:r:init:s0 tcontext=u:r:init:s0 tclass=capability permissive=1
2151[    1.785406] audit: type=1400 audit(133959.623:8): avc:  denied  { module_load } for  pid=1 comm="init" path="/sbin/modules/arizona-ldo1.ko" dev="rootfs" ino=11559 scontext=u:r:init:s0 tcontext=u:object_r:rootfs:s0 tclass=system permissive=1
2152[    1.786107] pmi632_charger: default_irq_handler: IRQ: usbin-collapse
2153[    1.786131] pmi632_charger: default_irq_handler: IRQ: aicl-done
2154[    1.787911] audit: type=1400 audit(133959.626:9): avc:  denied  { map } for  pid=422 comm="init" path="/plat_file_contexts" dev="rootfs" ino=11309 scontext=u:r:vendor_init:s0 tcontext=u:object_r:file_contexts_file:s0 tclass=file permissive=1
2155[    1.787919] audit: type=1400 audit(133959.626:10): avc:  denied  { search } for  pid=1 comm="init" scontext=u:r:init:s0 tcontext=u:r:kernel:s0 tclass=key permissive=1
2156[    1.788440] ueventd: ueventd started!
2157[    1.788992] arizona_ldo1: loading out-of-tree module taints kernel.
2158[    1.790214] selinux: SELinux: Loaded file_contexts
2159[    1.790214]
2160[    1.790278] ueventd: Parsing file /ueventd.rc...
2161[    1.790797] ueventd: Parsing file /vendor/ueventd.rc...
2162[    1.790823] ueventd: Unable to read config file '/vendor/ueventd.rc': open() failed: No such file or directory
2163[    1.790848] ueventd: Parsing file /odm/ueventd.rc...
2164[    1.790866] ueventd: Unable to read config file '/odm/ueventd.rc': open() failed: No such file or directory
2165[    1.790944] ueventd: Parsing file /ueventd.qcom.rc...
2166[    1.792859] ueventd: [libfs_mgr]Unknown file contents encryption mode: ice
2167[    1.800487] aw8695 driver version v1.3.5
2168[    1.800666] aw8695_i2c_probe enter
2169[    1.800675] aw8695_haptic 0-005a: aw8695_parse_dt: reset gpio provided ok
2170[    1.800679] aw8695_haptic 0-005a: aw8695_parse_dt: irq gpio provided ok.
2171[    1.800681] aw8695_haptic 0-005a: aw8695_parse_dt: haptic context gpio provided ok.
2172[    1.800684] aw8695_haptic 0-005a: aw8695_parse_dt: normal gain value for long vibrating is 0x80.
2173[    1.800686] aw8695_haptic 0-005a: aw8695_parse_dt: reduced gain value for long vibrating is 0x80.
2174[    1.800768] aw8695_hw_reset enter
2175[    1.813525] aw8695_read_chipid aw8695 detected
2176[    1.820080] aw8695_interrupt_setup enter
2177[    1.820270] aw8695_interrupt_setup: reg SYSINT=0x0
2178[    1.822044] aw8695_vibrator_init enter
2179[    1.822107] aw8695_haptic_init enter
2180[    1.829281] aw8695_haptic_f0_calibration enter
2181[    1.829284] aw8695_haptic_get_f0 enter
2182[    1.829664] pmi632_charger: chg_state_change_irq_handler: IRQ: chg-state-change
2183[    1.829711] batt power supply prop 4 not supported
2184[    1.876231] power_supply bms: driver failed to report `cc_soc' property: -22
2185[    1.876241] synth uevent: /devices/platform/soc/1c40000.qcom,spmi/spmi-0/spmi0-02/1c40000.qcom,spmi:qcom,pmi632@2:qpnp,qg/power_supply/bms: failed to send uevent
2186[    1.876244] power_supply bms: uevent: failed to send synthetic uevent
2187[    1.944228] ueventd: Coldboot took 0.15 seconds
2188[    2.157620] pmi632_charger: default_irq_handler: IRQ: aicl-done
2189[    2.608580] pmi632_charger: usb_source_change_irq_handler: APSD_STATUS = 0x01
2190[    2.608602] pmi632_charger: smblib_update_usb_type: APSD=SDP PD=0
2191[    2.608650] msm-dwc3 4e00000.ssusb: vbus:1 event received
2192[    2.608700] msm-dwc3 4e00000.ssusb: dwc3_resume_work: dwc3 resume work
2193[    2.608714] msm-dwc3 4e00000.ssusb: XCVR: ID set
2194[    2.608720] msm-dwc3 4e00000.ssusb: XCVR: BSV set
2195[    2.608725] msm-dwc3 4e00000.ssusb: XCVR: SUSP clear
2196[    2.608755] pmi632_charger: smblib_handle_apsd_done: IRQ: apsd-done rising; SDP detected
2197[    2.608757] pmi632_charger: smblib_handle_hvdcp_detect_done: IRQ: hvdcp-detect-done falling
2198[    2.608759] msm-dwc3 4e00000.ssusb: undefined state
2199[    2.608765] pmi632_charger: smblib_handle_hvdcp_check_timeout: IRQ: smblib_handle_hvdcp_check_timeout falling
2200[    2.608767] pmi632_charger: smblib_handle_sdp_enumeration_done: IRQ: sdp-enumeration-done falling
2201[    2.608768] msm-dwc3 4e00000.ssusb: b_sess_vld
2202[    2.608772] pmi632_charger: smblib_handle_slow_plugin_timeout: IRQ: slow-plugin-timeout falling
2203[    2.608781] msm-dwc3 4e00000.ssusb: DWC3-msm runtime resume
2204[    2.608789] msm-dwc3 4e00000.ssusb: dwc3_msm_resume: exiting lpm
2205[    2.608792] pmi632_charger: usb_source_change_irq_handler: APSD_STATUS = 0x01
2206[    2.610205] msm-dwc3 4e00000.ssusb: dwc3_msm_resume: exit power collapse
2207[    2.611859] msm-dwc3 4e00000.ssusb: dwc3_msm_resume: exit power collapse
2208[    2.612301] msm-dwc3 4e00000.ssusb: DWC3_CONTROLLER_POST_RESET_EVENT received
2209[    2.612383] msm-dwc3 4e00000.ssusb: DWC3 exited from low power mode
2210[    2.612389] msm-dwc3 4e00000.ssusb: dwc3_pwr_event_handler irq_stat=0
2211[    2.612407] msm-dwc3 4e00000.ssusb: dwc3_otg_start_peripheral: turn on gadget dwc3-gadget
2212[    2.613666] msm-dwc3 4e00000.ssusb: peripheral state
2213[    2.706773] aw8695_haptic_get_f0 f0 cali sleep 10ms
2214[    2.720100] aw8695_haptic_get_f0 f0 cali sleep 10ms
2215[    2.733394] aw8695_haptic_get_f0 f0 cali sleep 10ms
2216[    2.746749] aw8695_haptic_get_f0 f0 cali sleep 10ms
2217[    2.760069] aw8695_haptic_get_f0 f0 cali sleep 10ms
2218[    2.773383] aw8695_haptic_get_f0 f0 cali sleep 10ms
2219[    2.773399] pmi632_charger: smblib_icl_change_work: icl_settled=100000
2220[    2.786706] aw8695_haptic_get_f0 f0 cali sleep 10ms
2221[    2.800082] aw8695_haptic_get_f0 f0 cali sleep 10ms
2222[    2.813373] aw8695_haptic_get_f0 f0 cali sleep 10ms
2223[    2.822791] msm-dwc3 4e00000.ssusb: msm_dwc3_pwr_irq received
2224[    2.822803] msm-dwc3 4e00000.ssusb: dwc3_pwr_event_handler irq_stat=4
2225[    2.826726] aw8695_haptic_get_f0 f0 cali sleep 10ms
2226[    2.840074] aw8695_haptic_get_f0 f0 cali sleep 10ms
2227[    2.853383] aw8695_haptic_get_f0 f0 cali sleep 10ms
2228[    2.866743] aw8695_haptic_get_f0 f0 cali sleep 10ms
2229[    2.880083] aw8695_haptic_get_f0 f0 cali sleep 10ms
2230[    2.893373] aw8695_haptic_get_f0 f0 cali sleep 10ms
2231[    2.906748] aw8695_haptic_get_f0 f0 cali sleep 10ms
2232[    2.920077] aw8695_haptic_get_f0 f0 cali sleep 10ms
2233[    2.933381] aw8695_haptic_get_f0 f0 cali sleep 10ms
2234[    2.946736] aw8695_haptic_get_f0 f0 cali sleep 10ms
2235[    2.960081] aw8695_haptic_get_f0 f0 cali sleep 10ms
2236[    2.973373] aw8695_haptic_get_f0 f0 cali sleep 10ms
2237[    2.986748] aw8695_haptic_get_f0 f0 cali sleep 10ms
2238[    3.000088] aw8695_haptic_get_f0 f0 cali sleep 10ms
2239[    3.013382] aw8695_haptic_get_f0 f0 cali sleep 10ms
2240[    3.026743] aw8695_haptic_get_f0 f0 cali sleep 10ms
2241[    3.040082] aw8695_haptic_get_f0 f0 cali sleep 10ms
2242[    3.053373] aw8695_haptic_get_f0 f0 cali sleep 10ms
2243[    3.066748] aw8695_haptic_get_f0 f0 cali sleep 10ms
2244[    3.080069] aw8695_haptic_get_f0 f0 cali sleep 10ms
2245[    3.093381] aw8695_haptic_get_f0 f0 cali sleep 10ms
2246[    3.106736] aw8695_haptic_get_f0 f0 cali sleep 10ms
2247[    3.120081] aw8695_haptic_get_f0 f0 cali sleep 10ms
2248[    3.133397] aw8695_haptic_get_f0 f0 cali sleep 10ms
2249[    3.146748] aw8695_haptic_get_f0 f0 cali sleep 10ms
2250[    3.160070] aw8695_haptic_get_f0 f0 cali sleep 10ms
2251[    3.173381] aw8695_haptic_get_f0 f0 cali sleep 10ms
2252[    3.186736] aw8695_haptic_get_f0 f0 cali sleep 10ms
2253[    3.200081] aw8695_haptic_get_f0 f0 cali sleep 10ms
2254[    3.213373] aw8695_haptic_get_f0 f0 cali sleep 10ms
2255[    3.226748] aw8695_haptic_get_f0 f0 cali sleep 10ms
2256[    3.240077] aw8695_haptic_get_f0 f0 cali sleep 10ms
2257[    3.253380] aw8695_haptic_get_f0 f0 cali sleep 10ms
2258[    3.266752] aw8695_haptic_get_f0 f0 cali sleep 10ms
2259[    3.280082] aw8695_haptic_get_f0 f0 cali sleep 10ms
2260[    3.293373] aw8695_haptic_get_f0 f0 cali sleep 10ms
2261[    3.306748] aw8695_haptic_get_f0 f0 cali sleep 10ms
2262[    3.320069] aw8695_haptic_get_f0 f0 cali sleep 10ms
2263[    3.333381] aw8695_haptic_get_f0 f0 cali sleep 10ms
2264[    3.346743] aw8695_haptic_get_f0 f0 cali sleep 10ms
2265[    3.360081] aw8695_haptic_get_f0 f0 cali sleep 10ms
2266[    3.360562] aw8695_haptic_f0_calibration get f0 error, user defafult f0
2267[    3.362141] aw8695_i2c_probe probe completed successfully!
2268[    3.362354] init: Command 'insmod /sbin/modules/aw8695.ko' action=early-init (/init.recovery.qcom.rc:146) took 1568ms and succeeded
2269[    3.371793] cirrus_cs35l41: Unknown symbol wm_adsp_write_ctl (err 0)
2270[    3.371822] cirrus_cs35l41: Unknown symbol wm_adsp2_remove (err 0)
2271[    3.371833] cirrus_cs35l41: Unknown symbol wm_adsp_read_ctl (err 0)
2272[    3.371847] cirrus_cs35l41: Unknown symbol wm_halo_early_event (err 0)
2273[    3.371913] cirrus_cs35l41: Unknown symbol wm_adsp2_codec_remove (err 0)
2274[    3.371919] cirrus_cs35l41: Unknown symbol wm_adsp2_preloader_put (err 0)
2275[    3.371922] cirrus_cs35l41: Unknown symbol wm_adsp2_preloader_get (err 0)
2276[    3.371948] cirrus_cs35l41: Unknown symbol wm_adsp2_codec_probe (err 0)
2277[    3.371968] cirrus_cs35l41: Unknown symbol wm_halo_init (err 0)
2278[    3.371971] cirrus_cs35l41: Unknown symbol wm_halo_event (err 0)
2279[    3.388994] cirrus_cs48l32: Unknown symbol tacna_eq_ev (err 0)
2280[    3.389004] cirrus_cs48l32: Unknown symbol wm_adsp_compr_pointer (err 0)
2281[    3.389021] cirrus_cs48l32: Unknown symbol tacna_eq_mode_put (err 0)
2282[    3.389024] cirrus_cs48l32: Unknown symbol tacna_lhpf4_mode (err 0)
2283[    3.389041] cirrus_cs48l32: Unknown symbol tacna_us_det_num (err 0)
2284[    3.389045] cirrus_cs48l32: Unknown symbol tacna_in_vd_ramp (err 0)
2285[    3.389049] cirrus_cs48l32: Unknown symbol wm_adsp_compr_handle_irq (err 0)
2286[    3.389052] cirrus_cs48l32: Unknown symbol tacna_inmux (err 0)
2287[    3.389060] cirrus_cs48l32: Unknown symbol tacna_in_rate_put (err 0)
2288[    3.389073] cirrus_cs48l32: Unknown symbol tacna_set_sysclk (err 0)
2289[    3.389076] cirrus_cs48l32: Unknown symbol tacna_core_init (err 0)
2290[    3.389080] cirrus_cs48l32: Unknown symbol tacna_eq_mode (err 0)
2291[    3.389083] cirrus_cs48l32: Unknown symbol tacna_isrc_fsh (err 0)
2292[    3.389085] cirrus_cs48l32: Unknown symbol tacna_request_irq (err 0)
2293[    3.389093] cirrus_cs48l32: Unknown symbol wm_adsp2_remove (err 0)
2294[    3.389097] cirrus_cs48l32: Unknown symbol tacna_input_rate (err 0)
2295[    3.389104] cirrus_cs48l32: Unknown symbol tacna_noise_tlv (err 0)
2296[    3.389108] cirrus_cs48l32: Unknown symbol tacna_in_vi_ramp (err 0)
2297[    3.389116] cirrus_cs48l32: Unknown symbol tacna_sysclk_ev (err 0)
2298[    3.389119] cirrus_cs48l32: Unknown symbol wm_halo_early_event (err 0)
2299[    3.389123] cirrus_cs48l32: Unknown symbol tacna_eq_coeff_info (err 0)
2300[    3.389126] cirrus_cs48l32: Unknown symbol tacna_rate_put (err 0)
2301[    3.389129] cirrus_cs48l32: Unknown symbol tacna_init_inputs (err 0)
2302[    3.389133] cirrus_cs48l32: Unknown symbol tacna_low_power_mode_put (err 0)
2303[    3.389140] cirrus_cs48l32: Unknown symbol tacna_set_irq_wake (err 0)
2304[    3.389144] cirrus_cs48l32: Unknown symbol tacna_ana_tlv (err 0)
2305[    3.389147] cirrus_cs48l32: Unknown symbol tacna_lhpf3_mode (err 0)
2306[    3.389164] cirrus_cs48l32: Unknown symbol tacna_mixer_tlv (err 0)
2307[    3.389166] cirrus_cs48l32: Unknown symbol tacna_dai_ops (err 0)
2308[    3.389170] cirrus_cs48l32: Unknown symbol tacna_mixer_texts (err 0)
2309[    3.389174] cirrus_cs48l32: Unknown symbol tacna_init_dai (err 0)
2310[    3.389177] cirrus_cs48l32: Unknown symbol tacna_eq_coeff_get (err 0)
2311[    3.389180] cirrus_cs48l32: Unknown symbol tacna_us_tlv (err 0)
2312[    3.389187] cirrus_cs48l32: Unknown symbol tacna_auxpdm_switch (err 0)
2313[    3.389191] cirrus_cs48l32: Unknown symbol wm_adsp_compr_get_caps (err 0)
2314[    3.389194] cirrus_cs48l32: Unknown symbol wm_adsp_compr_copy (err 0)
2315[    3.389197] cirrus_cs48l32: Unknown symbol tacna_us_det_hold (err 0)
2316[    3.389204] cirrus_cs48l32: Unknown symbol tacna_eq_tlv (err 0)
2317[    3.389208] cirrus_cs48l32: Unknown symbol tacna_fx_rate (err 0)
2318[    3.389211] cirrus_cs48l32: Unknown symbol tacna_auxpdm_in_texts (err 0)
2319[    3.389214] cirrus_cs48l32: Unknown symbol tacna_us_output_rate (err 0)
2320[    3.389221] cirrus_cs48l32: Unknown symbol tacna_init_auxpdm (err 0)
2321[    3.389228] cirrus_cs48l32: Unknown symbol wm_halo_bus_error (err 0)
2322[    3.389231] cirrus_cs48l32: Unknown symbol tacna_drc_activity_output_mux (err 0)
2323[    3.389237] cirrus_cs48l32: Unknown symbol tacna_free_irq (err 0)
2324[    3.389241] cirrus_cs48l32: Unknown symbol tacna_lhpf1_mode (err 0)
2325[    3.389245] cirrus_cs48l32: Unknown symbol tacna_us2_activity (err 0)
2326[    3.389250] cirrus_cs48l32: Unknown symbol tacna_fllhj_set_refclk (err 0)
2327[    3.389254] cirrus_cs48l32: Unknown symbol tacna_us_in_texts (err 0)
2328[    3.389257] cirrus_cs48l32: Unknown symbol wm_adsp2_codec_remove (err 0)
2329[    3.389261] cirrus_cs48l32: Unknown symbol wm_adsp_compr_open (err 0)
2330[    3.389263] cirrus_cs48l32: Unknown symbol tacna_mixer_values (err 0)
2331[    3.389266] cirrus_cs48l32: Unknown symbol tacna_init_eq (err 0)
2332[    3.389273] cirrus_cs48l32: Unknown symbol wm_adsp2_preloader_put (err 0)
2333[    3.389276] cirrus_cs48l32: Unknown symbol tacna_dsp_memory_disable (err 0)
2334[    3.389280] cirrus_cs48l32: Unknown symbol wm_adsp_compr_free (err 0)
2335[    3.389283] cirrus_cs48l32: Unknown symbol tacna_eq_mode_get (err 0)
2336[    3.389290] cirrus_cs48l32: Unknown symbol wm_adsp2_preloader_get (err 0)
2337[    3.389296] cirrus_cs48l32: Unknown symbol tacna_lhpf2_mode (err 0)
2338[    3.389300] cirrus_cs48l32: Unknown symbol tacna_isrc_fsl (err 0)
2339[    3.389310] cirrus_cs48l32: Unknown symbol tacna_digital_tlv (err 0)
2340[    3.389316] cirrus_cs48l32: Unknown symbol tacna_us1_activity (err 0)
2341[    3.389319] cirrus_cs48l32: Unknown symbol tacna_sample_rate (err 0)
2342[    3.389323] cirrus_cs48l32: Unknown symbol wm_halo_wdt_expire (err 0)
2343[    3.389328] cirrus_cs48l32: Unknown symbol tacna_dsp_add_codec_controls (err 0)
2344[    3.389335] cirrus_cs48l32: Unknown symbol tacna_us_switch (err 0)
2345[    3.389339] cirrus_cs48l32: Unknown symbol wm_adsp2_codec_probe (err 0)
2346[    3.389342] cirrus_cs48l32: Unknown symbol tacna_in_put_volsw (err 0)
2347[    3.389345] cirrus_cs48l32: Unknown symbol wm_adsp_compr_trigger (err 0)
2348[    3.389349] cirrus_cs48l32: Unknown symbol tacna_dsp_memory_enable (err 0)
2349[    3.389352] cirrus_cs48l32: Unknown symbol tacna_us_freq_texts (err 0)
2350[    3.389355] cirrus_cs48l32: Unknown symbol tacna_dsp_trigger_output_mux (err 0)
2351[    3.389359] cirrus_cs48l32: Unknown symbol wm_adsp_compr_set_params (err 0)
2352[    3.389362] cirrus_cs48l32: Unknown symbol tacna_init_fll (err 0)
2353[    3.389370] cirrus_cs48l32: Unknown symbol tacna_in_hpf_cut_enum (err 0)
2354[    3.389373] cirrus_cs48l32: Unknown symbol tacna_auxpdm2_freq (err 0)
2355[    3.389376] cirrus_cs48l32: Unknown symbol tacna_dsp_freq_update (err 0)
2356[    3.389380] cirrus_cs48l32: Unknown symbol tacna_lhpf_coeff_put (err 0)
2357[    3.389382] cirrus_cs48l32: Unknown symbol tacna_dmode_texts (err 0)
2358[    3.389386] cirrus_cs48l32: Unknown symbol tacna_us_det_thr (err 0)
2359[    3.389389] cirrus_cs48l32: Unknown symbol tacna_auxpdm1_freq (err 0)
2360[    3.389395] cirrus_cs48l32: Unknown symbol wm_halo_init (err 0)
2361[    3.389398] cirrus_cs48l32: Unknown symbol tacna_in_dmic_osr (err 0)
2362[    3.389404] cirrus_cs48l32: Unknown symbol wm_halo_event (err 0)
2363[    3.389411] cirrus_cs48l32: Unknown symbol tacna_eq_coeff_put (err 0)
2364[    3.389414] cirrus_cs48l32: Unknown symbol tacna_core_destroy (err 0)
2365[    3.389417] cirrus_cs48l32: Unknown symbol tacna_in_ev (err 0)
2366[    3.403077] cirrus_playback: Unknown symbol afe_get_crus_params (err 0)
2367[    3.403093] cirrus_playback: Unknown symbol crus_afe_set_callback (err 0)
2368[    3.403119] cirrus_playback: Unknown symbol afe_set_crus_params (err 0)
2369[    3.431659] spi_geni 4c8c000.spi: proto 1
2370[    3.431974] spi_geni 4c8c000.spi: tx_fifo 16 rx_fifo 32 tx_width 32
2371[    3.432675] tacna spi1.0: CS48L32 revision A0.4
2372[    3.447376] tacna spi1.0: VDD_D didn't power off when expected
2373[    3.449899] VOUT_MIC: supplied by pm6125_l9
2374[    3.449957] VOUT_MIC: Bringing 2500000uV into 3000000-3000000uV
2375[    3.451295] Adding alias for supply VOUT_MIC,(null) -> VOUT_MIC,spi1.0
2376[    3.451298] Adding alias for supply VDD1_CP,(null) -> VDD1_CP,spi1.0
2377[    3.469607] etspi_parse_dt: 3.3v power pin=127
2378[    3.469611] etspi_parse_dt: 18v power pin=128
2379[    3.469626] etspi:  vdd_18v_Pin set to high
2380[    3.470637] etspi:  vcc_33v_Pin set to high
2381[    3.472644] etspi:  reset to high
2382[    3.474586] input: uinput-egis as /devices/virtual/input/input2
2383[    3.531286] init: Command 'insmod /sbin/modules/ets_fps_mmi.ko' action=early-init (/init.recovery.qcom.rc:155) took 70ms and succeeded
2384[    3.556204] exFAT: Version 1.2.9
2385[    3.585302] fpc1020_mmi: exports duplicate symbol FPS_register_notifier (owned by ets_fps_mmi)
2386[    3.585415] init: Command 'insmod /sbin/modules/fpc1020_mmi.ko' action=early-init (/init.recovery.qcom.rc:158) took 3ms and failed: finit_module for "/sbin/modules/fpc1020_mmi.ko" failed: Exec format error
2387[    3.602740] tacna spi1.0: VDD_D didn't power off when expected
2388[    3.626331] [HXTP] Himax common touch panel driver init
2389[    3.626409] [HXTP] Enter himax_chip_common_probe
2390[    3.626412] [HXTP] Prepare kernel fp
2391[    3.628576] [HXTP] PDATA START
2392[    3.628577] [HXTP] ic_data START
2393[    3.628580] [HXTP]  DT-himax_parse_dt:panel-coords = 0, 1079, 0, 2279
2394[    3.628582] [HXTP]  DT-himax_parse_dt:display-coords = (1080, 2280)
2395[    3.628589] [HXTP]  DT-himax_parse_dt:touch_info: HX_RX_NUM = 36, HX_TX_NUM = 18, HX_BT_NUM = 0,HX_X_RES = 1080,HX_Y_RES = 2280, HX_MAX_PT = 10, HX_XY_REVERSE = 0, HX_INT_IS_EDGE = 1
2396[    3.628591] [HXTP]  DT:gpio_3v3_en value is not valid
2397[    3.628592] [HXTP]  DT:gpio_irq=88, gpio_rst=87, gpio_3v3_en=-2
2398[    3.628593] [HXTP]  DT:protocol_type=1
2399[    3.628594] [HXTP]  DT:vdd_1v8_always_on=1
2400[    3.628596] [HXTP]  DT-No vk info in DT
2401[    3.628628] himax_tp spi0.0: spi0.0 supply vdd not found, using dummy regulator
2402[    3.628682] himax_tp spi0.0: spi0.0 supply avdd not found, using dummy regulator
2403[    3.631758] [HXTP] himax_get_ksym_idx: symtable size: 2
2404[    3.631760] [HXTP] himax_get_ksym_idx: HX_MOD_KSYM_HX83112
2405[    3.648072] [HXTP] himax_chip_common_init: No available chip exist!
2406[    3.648081] [HXTP] himax_regulator_deinit: entered.
2407[    3.648135] [HXTP] himax_regulator_deinit: regulator put, completed.
2408[    3.652524] [HXTP] himax_hx83112_init
2409[    3.652527] [HXTP] himax_hx83112_probe:Enter
2410[    3.652528] [HXTP] himax_get_ksym_idx: symtable size: 2
2411[    3.652529] [HXTP] himax_get_ksym_idx: HX_MOD_KSYM_HX83112
2412[    3.680080] get_battery_serialnumber: Battsn = SB18C52857
2413[    3.680091] get_profile_by_serialnumber: Default Serial Number SB18C52857
2414[    3.680095] get_profile_by_serialnumber: Battery Match Found using qcom,kd40-atl-4000mah
2415[    3.680102] QCOM-STEPCHG: read_range_data_from_node: Count qcom,step-chg-ranges failed, rc=-22
2416[    3.680107] QCOM-STEPCHG: read_range_data_from_node: Count qcom,jeita-fcc-ranges failed, rc=-22
2417[    3.680111] QCOM-STEPCHG: read_range_data_from_node: Count qcom,jeita-fv-ranges failed, rc=-22
2418[    3.717394] init: Command 'insmod /sbin/modules/himax_v2_mmi_hx83112.ko' action=early-init (/init.recovery.qcom.rc:161) took 68ms and succeeded
2419[    3.721354] mmi_annotate soc:mmi_annotate: size 800
2420[    3.721358] mmi_annotate soc:mmi_annotate: addr aefa1800
2421[    3.721427] mmi_annotate soc:mmi_annotate: mem-size 20000
2422[    3.728193] mmi_info: no symbol version for mmi_annotate
2423[    3.728713] mmi_storage_info :EMMC: 64GB MICRON S0J9K8 FV=
2424[    3.728851] mmi_unit_info (SMEM) for modem: version = 0x03, device = 'doha', radio = 0x0, radio_str = 'LATAM', system_rev = 0xc000, system_serial = 0x00000000b3d81a88, machine = '', barcode = 'ZY22754V4Z', baseband = '', carrier = 'retla', pu_reason = 0x00100000
2425[    3.728958] BOOT_SEQ: 257
2426[    3.732937] (NULL device *): hwmon_device_register() is deprecated. Please convert the driver to use hwmon_device_register_with_info().
2427[    3.733283] (NULL device *): hwmon_device_register() is deprecated. Please convert the driver to use hwmon_device_register_with_info().
2428[    3.741033] dvbdev: DVB: registering new adapter (Qualcomm Technologies, Inc. DVB adapter)
2429[    3.759368] SMBMMI: PMIC 37 is pmi632_charger
2430[    3.759449] pmi632_charger: smb_mmi_probe: IPC logging is enabled for mmi smbcharger
2431[    3.759455] pmi632_charger: parse_mmi_dt: mmi temp zones: Num: 5
2432[    3.759458] pmi632_charger: parse_mmi_dt: mmi temp zones: Zone 0, Temp 0 C, Step Volt 4200 mV, Full Rate 776 mA, Taper Rate 0 mA
2433[    3.759461] pmi632_charger: parse_mmi_dt: mmi temp zones: Zone 1, Temp 10 C, Step Volt 4200 mV, Full Rate 1940 mA, Taper Rate 776 mA
2434[    3.759465] pmi632_charger: parse_mmi_dt: mmi temp zones: Zone 2, Temp 15 C, Step Volt 0 mV, Full Rate 1940 mA, Taper Rate 1940 mA
2435[    3.759469] pmi632_charger: parse_mmi_dt: mmi temp zones: Zone 3, Temp 45 C, Step Volt 4200 mV, Full Rate 3000 mA, Taper Rate 2500 mA
2436[    3.759472] pmi632_charger: parse_mmi_dt: mmi temp zones: Zone 4, Temp 60 C, Step Volt 4200 mV, Full Rate 1940 mA, Taper Rate 0 mA
2437[    3.759813] (NULL device *): hwmon_device_register() is deprecated. Please convert the driver to use hwmon_device_register_with_info().
2438[    3.759999] pmi632_charger: smb_mmi_probe: DISABLE all QCOM JEITA
2439[    3.760184] qcom,qpnp-smbcharger-mmi 1c40000.qcom,spmi:qcom,pmi632@2:qcom,qpnp-smb5-mmi: Suspending USB for 50 ms to clear
2440[    3.768958] pmi632_charger: chg_state_change_irq_handler: IRQ: chg-state-change
2441[    3.768996] batt power supply prop 4 not supported
2442[    3.813420] pmi632_charger: smb_mmi_probe: QPNP SMB MMI probed successfully!
2443[    3.814210] init: Command 'insmod /sbin/modules/qpnp-smbcharger-mmi.ko' action=early-init (/init.recovery.qcom.rc:168) took 61ms and succeeded
2444[    3.820704] QG-K: qg_status_change_work: charge_status=3 charge_done=0
2445[    3.820719] QG-K: qg_input_status_update: Input status changed usb_present=1 dc_present=0
2446[    3.820797] pmi632_charger: smblib_set_charge_param: fast charge current: 3600000 is out of range [0, 3000000]
2447[    3.823104] moto sensor init!
2448[    3.823256] sensor init success!
2449[    3.842259] stmvl53l0_probe: Enter
2450[    3.842297] stmvl53l0_parse_vdd: vdd supply is not provided
2451[    3.842348] stmvl53l0_get_dt_data gpio_array[0] = 57
2452[    3.842353] stmvl53l0_get_dt_data gpio_array[1] = 70
2453[    3.842357] stmvl53l0_get_dt_data gpio_array[2] = 58
2454[    3.846047] pmi632_charger: mmi_heartbeat_work: APSD = 0, rerun_apsd_count = 1
2455[    3.846124] pmi632_charger: mmi_chrg_rate_check: Normal Charger Detected
2456[    3.846141] pmi632_charger: mmi_basic_charge_sm: SMBMMI: batt_mv = 4342, batt_ma 403, batt_soc 100, batt_temp 21, usb_mv 4965, dc_mv 0, cp 1, vp 1 dp 0
2457[    3.846191] pmi632_charger: mmi_basic_charge_sm: SMBMMI: Step State = MAX, Temp Zone 3, Health 1
2458[    3.846194] pmi632_charger: mmi_basic_charge_sm: SMBMMI: IMPOSED: FV = 4200000, CDIS = 0, FCC = 3000000, USBICL = 100000
2459[    3.846214] power_supply battery: smb_mmi_power_supply_changed: POWER_SUPPLY_CHARGE_RATE=Normal
2460[    3.855517] QG-K: qg_charge_full_update: msoc=100 health=1 charge_full=0 charge_done=0
2461[    3.855568] QG-K: qg_status_change_work: charge_status=3 charge_done=0
2462[    3.858747] QG-K: qg_charge_full_update: msoc=100 health=1 charge_full=0 charge_done=0
2463[    3.863525] i2c_geni 4a8c000.i2c: i2c error :-107
2464[    3.863532] stmvl53l0_checkmoduleid: i2c_transfer err:-107, addr:0x29, reg:0xc0
2465[    3.887016] stmvl53l0_checkmoduleid: STM VL53L0 Found 2044
2466[    3.887287] stmvl53l0_poll_thread(730) : Starting Polling thread
2467[    3.888003] input: STM VL53L0 proximity sensor as /devices/virtual/input/input3
2468[    3.889040] stmvl53l0_setup: Misc device registration name:laser
2469[    3.889594] stmvl53l0_setup: support ver. 1.1.23 enabled
2470[    3.889600] stmvl53l0_probe: End
2471[    3.889990] stmvl53l0_init_i2c: End with rc:0
2472[    3.890129] init: Command 'insmod /sbin/modules/stmvl53l0.ko' action=early-init (/init.recovery.qcom.rc:171) took 66ms and succeeded
2473[    3.897727] input: Moto CapSense Ch0 as /devices/virtual/input/input4
2474[    3.898695] sensors_classdev_register,Moto CapSense Ch0
2475[    3.899267] Registered sensors device: Moto CapSense Ch0,ret = 0
2476[    3.899821] input: Moto CapSense Ch2 as /devices/virtual/input/input5
2477[    3.900824] sensors_classdev_register,Moto CapSense Ch2
2478[    3.901423] Registered sensors device: Moto CapSense Ch2,ret = 0
2479[    3.901987] input: Moto CapSense Ch4 as /devices/virtual/input/input6
2480[    3.902907] sensors_classdev_register,Moto CapSense Ch4
2481[    3.903568] Registered sensors device: Moto CapSense Ch4,ret = 0
2482[    3.904338] i2c_geni 4a8c000.i2c: i2c error :-107
2483[    4.125445] pmi632_charger: default_irq_handler: IRQ: chgr-error
2484[    4.125465] pmi632_charger: batt_psy_changed_irq_handler: IRQ: bat-ov
2485[    4.125504] batt power supply prop 4 not supported
2486[    4.125555] pmi632_charger: chg_state_change_irq_handler: IRQ: chg-state-change
2487[    4.125599] pmi632_charger: smblib_get_prop_batt_health: battery over-voltage vbat_fg = 4353445uV, fv = 4200000uV
2488[    4.130547] batt power supply prop 4 not supported
2489[    4.130618] pmi632_charger: smblib_get_prop_batt_health: battery over-voltage vbat_fg = 4353445uV, fv = 4200000uV
2490[    4.164833] init: Command 'insmod /sbin/modules/sx933x_sar.ko' action=early-init (/init.recovery.qcom.rc:172) took 274ms and succeeded
2491[    4.175052] tzlog_dump soc:tzlog_dump: tzlog_dump_size 30000
2492[    4.175056] tzlog_dump soc:tzlog_dump: tzlog_dump_addr aefa2000
2493[    4.183537] utags (utags_probe): Done [config]
2494[    4.183650] utags (utags_dt_init): backup storage path not provided
2495[    4.183957] utags (utags_probe): Done [hw]
2496[    4.190479] watchdog_cpu_ctx soc:wdog_cputctx: size 2e000
2497[    4.190483] watchdog_cpu_ctx soc:wdog_cputctx: addr aefd2000
2498[    4.190486] watchdog_cpu_ctx soc:wdog_cputctx: size per cpu is 5c00
2499[    4.299699] pmi632_charger: chg_state_change_irq_handler: IRQ: chg-state-change
2500[    4.299747] batt power supply prop 4 not supported
2501[    4.299852] pmi632_charger: smblib_get_prop_batt_health: battery over-voltage vbat_fg = 4326001uV, fv = 4200000uV
2502[    4.304007] init: Command 'insmod /sbin/modules/watchdog_cpu_ctx.ko' action=early-init (/init.recovery.qcom.rc:176) took 119ms and succeeded
2503[    4.306970] init: processing action (wait_for_coldboot_done) from (<Builtin Action>:0)
2504[    4.307012] init: wait for '/dev/.coldboot_done' took 0ms
2505[    4.307060] init: processing action (MixHwrngIntoLinuxRng) from (<Builtin Action>:0)
2506[    4.366208] init: Mixed 512 bytes from /dev/hw_random into /dev/urandom
2507[    4.366235] init: Command 'MixHwrngIntoLinuxRng' action=MixHwrngIntoLinuxRng (<Builtin Action>:0) took 59ms and succeeded
2508[    4.366245] init: processing action (SetMmapRndBits) from (<Builtin Action>:0)
2509[    4.366522] init: processing action (SetKptrRestrict) from (<Builtin Action>:0)
2510[    4.366611] init: processing action (keychord_init) from (<Builtin Action>:0)
2511[    4.366622] init: processing action (console_init) from (<Builtin Action>:0)
2512[    4.366639] init: processing action (init) from (/init.rc:26)
2513[    4.367982] init: processing action (init) from (/init.recovery.mksh.rc:1)
2514[    4.367995] init: processing action (init) from (/init.recovery.qcom.rc:134)
2515[    4.368007] init: starting service 'logd'...
2516[    4.368642] init: starting service 'hwservicemanager'...
2517[    4.369147] init: starting service 'boot-1-0'...
2518[    4.369363] init: Created socket '/dev/socket/logd', mode 666, user 1036, group 1036
2519[    4.369784] init: starting service 'prepdecrypt'...
2520[    4.369892] init: Created socket '/dev/socket/logdr', mode 666, user 1036, group 1036
2521[    4.370326] init: starting service 'time_daemon'...
2522[    4.370647] init: Created socket '/dev/socket/logdw', mode 222, user 1036, group 1036
2523[    4.370931] init: starting service 'load_ts_firmware'...
2524[    4.371517] init: processing action (StartBoringSslSelfTest) from (<Builtin Action>:0)
2525[    4.371985] init: processing action (MixHwrngIntoLinuxRng) from (<Builtin Action>:0)
2526[    4.383453] logd: failed to set AID_LOGD uid
2527[    4.383570] logd: Cannot read /system/etc/event-log-tags
2528[    4.384275] logd.auditd: start
2529[    4.384304] logd.klogd: 4384286372
2530[    4.410835] type=1400 audit(133962.223:17): avc: denied { read } for pid=448 comm="time_daemon" name="devices" dev="sysfs" ino=17745 scontext=u:r:recovery:s0 tcontext=u:object_r:sysfs:s0 tclass=dir permissive=1
2531[    4.411019] type=1400 audit(133962.223:17): avc: denied { read } for pid=448 comm="time_daemon" name="devices" dev="sysfs" ino=17745 scontext=u:r:recovery:s0 tcontext=u:object_r:sysfs:s0 tclass=dir permissive=1
2532[    4.411030] type=1400 audit(133962.223:18): avc: denied { open } for pid=448 comm="time_daemon" path="/sys/bus/msm_subsys/devices" dev="sysfs" ino=17745 scontext=u:r:recovery:s0 tcontext=u:object_r:sysfs:s0 tclass=dir permissive=1
2533[    4.411438] type=1400 audit(133962.223:18): avc: denied { open } for pid=448 comm="time_daemon" path="/sys/bus/msm_subsys/devices" dev="sysfs" ino=17745 scontext=u:r:recovery:s0 tcontext=u:object_r:sysfs:s0 tclass=dir permissive=1
2534[    4.411449] type=1400 audit(133962.223:19): avc: denied { read } for pid=448 comm="time_daemon" name="name" dev="sysfs" ino=35807 scontext=u:r:recovery:s0 tcontext=u:object_r:sysfs:s0 tclass=file permissive=1
2535[    4.411931] type=1400 audit(133962.223:19): avc: denied { read } for pid=448 comm="time_daemon" name="name" dev="sysfs" ino=35807 scontext=u:r:recovery:s0 tcontext=u:object_r:sysfs:s0 tclass=file permissive=1
2536[    4.411942] type=1400 audit(133962.223:20): avc: denied { open } for pid=448 comm="time_daemon" path="/sys/devices/platform/soc/5ae0000.qcom,venus/subsys4/name" dev="sysfs" ino=35807 scontext=u:r:recovery:s0 tcontext=u:object_r:sysfs:s0 tclass=file permissive=1
2537[    4.412728] type=1400 audit(133962.223:20): avc: denied { open } for pid=448 comm="time_daemon" path="/sys/devices/platform/soc/5ae0000.qcom,venus/subsys4/name" dev="sysfs" ino=35807 scontext=u:r:recovery:s0 tcontext=u:object_r:sysfs:s0 tclass=file permissive=1
2538[    4.412743] type=1400 audit(133962.223:21): avc: denied { create } for pid=448 comm="time_daemon" scontext=u:r:recovery:s0 tcontext=u:r:recovery:s0 tclass=qipcrtr_socket permissive=1
2539[    4.412825] type=1400 audit(133962.223:21): avc: denied { create } for pid=448 comm="time_daemon" scontext=u:r:recovery:s0 tcontext=u:r:recovery:s0 tclass=qipcrtr_socket permissive=1
2540[    4.412834] type=1400 audit(133962.223:22): avc: denied { dac_read_search } for pid=448 comm="time_daemon" capability=2 scontext=u:r:recovery:s0 tcontext=u:r:recovery:s0 tclass=capability permissive=1
2541[    4.413135] type=1400 audit(133962.223:22): avc: denied { dac_read_search } for pid=448 comm="time_daemon" capability=2 scontext=u:r:recovery:s0 tcontext=u:r:recovery:s0 tclass=capability permissive=1
2542[    4.413144] type=1400 audit(133962.223:23): avc: denied { read } for pid=448 comm="time_daemon" name="rtc0" dev="tmpfs" ino=18419 scontext=u:r:recovery:s0 tcontext=u:object_r:rtc_device:s0 tclass=chr_file permissive=1
2543[    4.413502] type=1400 audit(133962.223:23): avc: denied { read } for pid=448 comm="time_daemon" name="rtc0" dev="tmpfs" ino=18419 scontext=u:r:recovery:s0 tcontext=u:object_r:rtc_device:s0 tclass=chr_file permissive=1
2544[    4.413516] type=1400 audit(133962.223:24): avc: denied { open } for pid=448 comm="time_daemon" path="/dev/rtc0" dev="tmpfs" ino=18419 scontext=u:r:recovery:s0 tcontext=u:object_r:rtc_device:s0 tclass=chr_file permissive=1
2545[    4.413567] type=1400 audit(133962.223:24): avc: denied { open } for pid=448 comm="time_daemon" path="/dev/rtc0" dev="tmpfs" ino=18419 scontext=u:r:recovery:s0 tcontext=u:object_r:rtc_device:s0 tclass=chr_file permissive=1
2546[    4.413577] type=1400 audit(133962.223:25): avc: denied { ioctl } for pid=448 comm="time_daemon" path="/dev/rtc0" dev="tmpfs" ino=18419 ioctlcmd=0x7009 scontext=u:r:recovery:s0 tcontext=u:object_r:rtc_device:s0 tclass=chr_file permissive=1
2547[    4.428936] init: Mixed 512 bytes from /dev/hw_random into /dev/urandom
2548[    4.428969] init: Command 'MixHwrngIntoLinuxRng' action=MixHwrngIntoLinuxRng (<Builtin Action>:0) took 56ms and succeeded
2549[    4.429009] init: Service 'load_ts_firmware' (pid 449) exited with status 0
2550[    4.429118] init: Untracked pid 450 exited with status 0
2551[    4.429136] init: processing action (late-init) from (/init.rc:78)
2552[    4.429287] selinux: avc:  denied  { set } for property=hwservicemanager.ready pid=445 uid=0 gid=0 scontext=u:r:recovery:s0 tcontext=u:object_r:hwservicemanager_prop:s0 tclass=property_service permissive=1
2553[    4.429287]
2554[    4.429352] init: processing action (queue_property_triggers) from (<Builtin Action>:0)
2555[    4.429372] init: processing action (early-fs) from (/init.recovery.qcom.rc:42)
2556[    4.429388] init: Command 'start vold' action=early-fs (/init.recovery.qcom.rc:43) took 0ms and failed: service vold not found
2557[    4.429400] init: processing action (fs) from (/init.rc:49)
2558[    4.430509] init: Command 'mount functionfs adb /dev/usb-ffs/adb uid=2000,gid=2000' action=fs (/init.rc:53) took 0ms and failed: mount() failed: No such device
2559[    4.430520] init: processing action (fs) from (/init.recovery.ldconfig.rc:1)
2560[    4.430534] init: processing action (fs) from (/init.recovery.qcom.rc:28)
2561[    4.430559] init: wait for '/dev/block/platform/soc/4744000.sdhci' took 0ms
2562[    4.431169] init: Keyring created with id 522620042 in process 1
2563[    4.431292] init: processing action (load_all_props_action) from (/init.recovery.logd.rc:1)
2564[    4.431307] init: processing action (load_system_props_action) from (/init.rc:67)
2565[    4.431330] init: Couldn't load property file '/system/build.prop': open() failed: No such file or directory: No such file or directory
2566[    4.431342] init: Couldn't load property file '/odm/build.prop': open() failed: No such file or directory: No such file or directory
2567[    4.431353] init: Couldn't load property file '/vendor/build.prop': open() failed: No such file or directory: No such file or directory
2568[    4.431366] init: Couldn't load property file '/factory/factory.prop': open() failed: No such file or directory: No such file or directory
2569[    4.431429] init: [libfs_mgr]Unknown file contents encryption mode: ice
2570[    4.431893] init: /recovery not specified in fstab
2571[    4.431921] init: processing action (load_persist_props_action) from (/init.rc:71)
2572[    4.431940] init: Couldn't load property file '/data/local.prop': open() failed: No such file or directory: No such file or directory
2573[    4.431962] init: Could not load single persistent property file, trying legacy directory: Unable to read persistent property file: open() failed: No such file or directory
2574[    4.431976] init: Unable to load legacy persistent properties: Unable to open persistent property directory "/data/property": No such file or directory
2575[    4.432065] init: processing action (load_persist_props_action) from (/init.recovery.logd.rc:4)
2576[    4.432077] init: processing action (firmware_mounts_complete) from (/init.rc:74)
2577[    4.432102] init: processing action (boot) from (/init.rc:55)
2578[    4.432594] init: starting service 'set_permissive'...
2579[    4.433237] init: starting service 'recovery'...
2580[    4.433840] init: starting service 'ldconfigtxt'...
2581[    4.434439] init: processing action (boot) from (/init.recovery.usb.rc:28)
2582[    4.436517] Mass Storage Function, version: 2009/09/11
2583[    4.436522] LUN: removable file: (no medium)
2584[    4.441798] init: Service 'ldconfigtxt' (pid 466) exited with status 0
2585[    4.442407] file system registered
2586[    4.443645] f_cdev_alloc: port_name:at_usb0 (0000000000000000) portno:(0)
2587[    4.444366] f_cdev_alloc: port_name:at_usb1 (0000000000000000) portno:(1)
2588[    4.444937] f_cdev_alloc: port_name:at_usb2 (0000000000000000) portno:(2)
2589[    4.450467] init: processing action (boot) from (/init.recovery.qcom.rc:128)
2590[    4.450695] init: processing action (enable_property_trigger) from (<Builtin Action>:0)
2591[    4.450723] init: processing action (ro.debuggable=1) from (/init.rc:114)
2592[    4.450774] init: processing action (sys.usb.config=adb) from (/init.recovery.usb.rc:110)
2593[    4.450788] init: starting service 'adbd'...
2594[    4.451407] init: processing action (crypto.ready=1) from (/init.recovery.qcom.rc:185)
2595[    4.451420] init: starting service 'sbinqseecomd'...
2596[    4.451975] init: processing action (service.adb.root=1) from (/init.rc:120)
2597[    4.452190] init: Command 'write /sys/class/android_usb/android0/enable 0' action=service.adb.root=1 (/init.rc:121) took 0ms and failed: Unable to write to file '/sys/class/android_usb/android0/enable': open() failed: Permission denied
2598[    4.452204] init: Created socket '/dev/socket/adbd', mode 660, user 1000, group 1000
2599[    4.452205] init: Sending signal 9 to service 'adbd' (pid 483) process group...
2600[    4.452271] libprocessgroup: kill(-483, 9) failed: No such process
2601[    4.457081] EXT4-fs (mmcblk0p78): mounted filesystem without journal. Opts: (null)
2602[    4.457652] libprocessgroup: Successfully killed process cgroup uid 0 pid 483 in 5ms
2603[    4.457835] init: Service 'set_permissive' (pid 464) exited with status 0
2604[    4.457889] init: Service 'adbd' (pid 483) received signal 9
2605[    4.458124] init: Command 'write /sys/class/android_usb/android0/enable 1' action=service.adb.root=1 (/init.rc:123) took 0ms and failed: Unable to write to file '/sys/class/android_usb/android0/enable': open() failed: Permission denied
2606[    4.479804] selinux: avc:  denied  { set } for property=vendor.sys.listeners.registered pid=484 uid=1000 gid=1000 scontext=u:r:recovery:s0 tcontext=u:object_r:vendor_default_prop:s0 tclass=property_service permissive=1
2607[    4.479804]
2608[    4.479884] init: processing action (vendor.sys.listeners.registered=true) from (/init.recovery.qcom.rc:188)
2609[    4.479906] init: starting service 'keymaster-4-0'...
2610[    4.480726] init: starting service 'gatekeeper-1-0'...
2611[    4.481330] init: starting service 'servicemanager'...
2612[    4.481916] init: Sending signal 9 to service 'time_daemon' (pid 448) process group...
2613[    4.487356] libprocessgroup: Successfully killed process cgroup uid 0 pid 448 in 5ms
2614[    4.487520] init: Service 'time_daemon' (pid 448) received signal 9
2615[    4.494899] selinux: avc:  denied  { set } for property=twrp.crash_counter pid=465 uid=0 gid=0 scontext=u:r:recovery:s0 tcontext=u:object_r:default_prop:s0 tclass=property_service permissive=1
2616[    4.494899]
2617[    4.508430] msm-dsi-display:[dsi_display_prepare] panel_name=mipi_mot_vid_ds_1080p_630 ctrl-index=0
2618[    4.522182] init: Unable to set property 'ro.build.version.release' to '' from uid:0 gid:0 pid:503: Read-only property was already set
2619[    4.536004] init: Unable to set property 'ro.build.version.security_patch' to '' from uid:0 gid:0 pid:504: Read-only property was already set
2620[    4.599448] init: processing action (crypto.ready=1) from (/init.recovery.qcom.rc:185)
2621[    4.601786] init: Service 'prepdecrypt' (pid 447) exited with status 0
2622[    4.622476] EXT4-fs (mmcblk0p46): mounted filesystem with ordered data mode. Opts:
2623[    4.622942] SELinux:  Context u:object_r:persist_file:s0 is not valid (left unmapped).
2624[    4.623892] SELinux:  Context u:object_r:persist_time_file:s0 is not valid (left unmapped).
2625[    4.746719] msm_dwc3_perf_vote_work: in_perf_mode:0, interrupts in last sample:0
2626[    4.777216] F2FS-fs (mmcblk0p80): Mounted with checkpoint version = 4628da72
2627[    4.895422] F2FS-fs (mmcblk0p80): Mounted with checkpoint version = 4628da74
2628[    4.928015] selinux: avc:  denied  { set } for property=ctl.interface_start$android.hardware.keymaster@3.0::IKeymasterDevice/default pid=445 uid=0 gid=0 scontext=u:r:recovery:s0 tcontext=u:object_r:ctl_interface_start_prop:s0 tclass=property_service permissive=1
2629[    4.928015]
2630[    4.928176] init: Received control message 'interface_start' for 'android.hardware.keymaster@3.0::IKeymasterDevice/default' from pid: 445 (/sbin/hwservicemanager)
2631[    4.928192] init: Could not find service hosting interface android.hardware.keymaster@3.0::IKeymasterDevice/default
2632[    4.963223] init: Received control message 'interface_start' for 'android.hardware.keymaster@3.0::IKeymasterDevice/default' from pid: 445 (/sbin/hwservicemanager)
2633[    4.963240] init: Could not find service hosting interface android.hardware.keymaster@3.0::IKeymasterDevice/default
2634[    4.985849] selinux: avc:  denied  { set } for property=ro.crypto.state pid=465 uid=0 gid=0 scontext=u:r:recovery:s0 tcontext=u:object_r:vold_prop:s0 tclass=property_service permissive=1
2635[    4.985849]
2636[    4.985943] init: Unable to set property 'ro.crypto.state' to 'encrypted' from uid:0 gid:0 pid:465: Read-only property was already set
2637[    4.997520] EXT4-fs (mmcblk0p78): mounted filesystem without journal. Opts:
2638[    5.007252] EXT4-fs (mmcblk0p78): mounted filesystem without journal. Opts:
2639[    5.019616] EXT4-fs (mmcblk0p76): mounted filesystem without journal. Opts:
2640[    5.130477] SELinux:  Context u:object_r:elabel_data_file:s0 is not valid (left unmapped).
2641[    5.130585] SELinux:  Context u:object_r:iplog_data_file:s0 is not valid (left unmapped).
2642[    5.133253] SELinux:  Context u:object_r:vendor_tombstone_data_file:s0 is not valid (left unmapped).
2643[    5.135521] SELinux:  Context u:object_r:cutback_data_file:s0 is not valid (left unmapped).
2644[    5.135805] SELinux:  Context u:object_r:cutback_socket:s0 is not valid (left unmapped).
2645[    5.135943] SELinux:  Context u:object_r:imager_data_file:s0 is not valid (left unmapped).
2646[    5.136299] SELinux:  Context u:object_r:ramdump_vendor_data_file:s0 is not valid (left unmapped).
2647[    5.136396] SELinux:  Context u:object_r:display_vendor_data_file:s0 is not valid (left unmapped).
2648[    5.136492] SELinux:  Context u:object_r:lm_data_file:s0 is not valid (left unmapped).
2649[    5.138207] SELinux:  Context u:object_r:vendor_media_data_file:s0 is not valid (left unmapped).
2650[    5.138583] SELinux:  Context u:object_r:vendor_qdma_data_file:s0 is not valid (left unmapped).
2651[    5.138786] SELinux:  Context u:object_r:data_tzstorage_file:s0 is not valid (left unmapped).
2652[    5.138883] SELinux:  Context u:object_r:data_qtee_file:s0 is not valid (left unmapped).
2653[    5.138976] SELinux:  Context u:object_r:vendor_camera_data_file:s0 is not valid (left unmapped).
2654[    5.139350] SELinux:  Context u:object_r:vendor_ramdump_data_file:s0 is not valid (left unmapped).
2655[    5.139730] SELinux:  Context u:object_r:vendor_bt_data_file:s0 is not valid (left unmapped).
2656[    5.140119] SELinux:  Context u:object_r:wifi_vendor_data_file:s0 is not valid (left unmapped).
2657[    5.140423] SELinux:  Context u:object_r:wifi_vendor_wpa_socket:s0 is not valid (left unmapped).
2658[    5.141223] SELinux:  Context u:object_r:wigig_hostapd_socket:s0 is not valid (left unmapped).
2659[    5.142361] SELinux:  Context u:object_r:port_bridge_data_file:s0 is not valid (left unmapped).
2660[    5.142487] SELinux:  Context u:object_r:netmgrd_data_file:s0 is not valid (left unmapped).
2661[    5.142799] SELinux:  Context u:object_r:ipa_vendor_data_file:s0 is not valid (left unmapped).
2662[    5.143153] SELinux:  Context u:object_r:vendor_qti_data_file:s0 is not valid (left unmapped).
2663[    5.143263] SELinux:  Context u:object_r:cnd_data_file:s0 is not valid (left unmapped).
2664[    5.143677] SELinux:  Context u:object_r:vendor_audio_data_file:s0 is not valid (left unmapped).
2665[    5.144907] SELinux:  Context u:object_r:vendor_radio_data_file:s0 is not valid (left unmapped).
2666[    5.145584] SELinux:  Context u:object_r:vendor_mbn_data_file:s0 is not valid (left unmapped).
2667[    5.145701] SELinux:  Context u:object_r:location_data_file:s0 is not valid (left unmapped).
2668[    5.147010] SELinux:  Context u:object_r:vendor_time_data_file:s0 is not valid (left unmapped).
2669[    5.147466] SELinux:  Context u:object_r:vendor_fm_data_file:s0 is not valid (left unmapped).
2670[    5.147584] SELinux:  Context u:object_r:mpctl_data_file:s0 is not valid (left unmapped).
2671[    5.147945] SELinux:  Context u:object_r:iop_data_file:s0 is not valid (left unmapped).
2672[    5.148300] SELinux:  Context u:object_r:qti_logkit_priv_data_file:s0 is not valid (left unmapped).
2673[    5.148651] SELinux:  Context u:object_r:qti_logkit_pub_data_file:s0 is not valid (left unmapped).
2674[    5.148764] SELinux:  Context u:object_r:qti_logkit_priv_socket:s0 is not valid (left unmapped).
2675[    5.148918] SELinux:  Context u:object_r:qti_logkit_pub_socket:s0 is not valid (left unmapped).
2676[    5.149112] SELinux:  Context u:object_r:swap_data_file:s0 is not valid (left unmapped).
2677[    5.149209] SELinux:  Context u:object_r:vendor_vpp_data_file:s0 is not valid (left unmapped).
2678[    5.149307] SELinux:  Context u:object_r:vendor_tui_data_file:s0 is not valid (left unmapped).
2679[    5.149403] SELinux:  Context u:object_r:hbtp_log_file:s0 is not valid (left unmapped).
2680[    5.149502] SELinux:  Context u:object_r:tlocd_data_file:s0 is not valid (left unmapped).
2681[    5.149597] SELinux:  Context u:object_r:hal_neuralnetworks_data_file:s0 is not valid (left unmapped).
2682[    5.149689] SELinux:  Context u:object_r:dbvc_data_file:s0 is not valid (left unmapped).
2683[    5.149784] SELinux:  Context u:object_r:aplog_data_file:s0 is not valid (left unmapped).
2684[    5.149887] SELinux:  Context u:object_r:dropbox_data_file:s0 is not valid (left unmapped).
2685[    5.149992] SELinux:  Context u:object_r:panic_data_file:s0 is not valid (left unmapped).
2686[    5.150142] SELinux:  Context u:object_r:bugreport_data_file:s0 is not valid (left unmapped).
2687[    5.150326] SELinux:  Context u:object_r:chargeonly_data_file:s0 is not valid (left unmapped).
2688[    5.150432] SELinux:  Context u:object_r:ramdump_data_file:s0 is not valid (left unmapped).
2689[    5.150941] SELinux:  Context u:object_r:bt_ramdump_data_file:s0 is not valid (left unmapped).
2690[    5.151065] SELinux:  Context u:object_r:hwrev_data_file:s0 is not valid (left unmapped).
2691[    5.151621] SELinux:  Context u:object_r:nfc_vendor_data_file:s0 is not valid (left unmapped).
2692[    5.151735] SELinux:  Context u:object_r:fpc_data_file:s0 is not valid (left unmapped).
2693[    5.151844] SELinux:  Context u:object_r:fps_data_file:s0 is not valid (left unmapped).
2694[    5.151948] SELinux:  Context u:object_r:mdlog_data_file:s0 is not valid (left unmapped).
2695[    5.152580] SELinux:  Context u:object_r:mediadrm_vendor_data_file:s0 is not valid (left unmapped).
2696[    5.153529] SELinux:  Context u:object_r:vendor_memtest_data_file:s0 is not valid (left unmapped).
2697[    5.201161] SELinux:  Context u:object_r:log_app_data_file:s0 is not valid (left unmapped).
2698[    5.421347] type=1400 audit(133962.223:25): avc: denied { ioctl } for pid=448 comm="time_daemon" path="/dev/rtc0" dev="tmpfs" ino=18419 ioctlcmd=0x7009 scontext=u:r:recovery:s0 tcontext=u:object_r:rtc_device:s0 tclass=chr_file permissive=1
2699[    5.421368] type=1400 audit(1582811461.683:395): avc: denied { getattr } for pid=465 comm="recovery" path="/data/data/p1yCV8,68Lj7LegSubBAfML,oqCbPGr1Q0GxPA" dev="mmcblk0p80" ino=3184 scontext=u:r:recovery:s0 tcontext=u:object_r:app_data_file:s0:c138,c256,c512,c768 tclass=dir permissive=1
2700[    5.421476] type=1400 audit(1582811461.683:395): avc: denied { getattr } for pid=465 comm="recovery" path="/data/data/p1yCV8,68Lj7LegSubBAfML,oqCbPGr1Q0GxPA" dev="mmcblk0p80" ino=3184 scontext=u:r:recovery:s0 tcontext=u:object_r:app_data_file:s0:c138,c256,c512,c768 tclass=dir permissive=1
2701[    5.421486] type=1400 audit(1582811461.683:396): avc: denied { read } for pid=465 comm="recovery" name="p1yCV8,68Lj7LegSubBAfML,oqCbPGr1Q0GxPA" dev="mmcblk0p80" ino=3184 scontext=u:r:recovery:s0 tcontext=u:object_r:app_data_file:s0:c138,c256,c512,c768 tclass=dir permissive=1
2702[    5.421535] type=1400 audit(1582811461.683:396): avc: denied { read } for pid=465 comm="recovery" name="p1yCV8,68Lj7LegSubBAfML,oqCbPGr1Q0GxPA" dev="mmcblk0p80" ino=3184 scontext=u:r:recovery:s0 tcontext=u:object_r:app_data_file:s0:c138,c256,c512,c768 tclass=dir permissive=1
2703[    5.421544] type=1400 audit(1582811461.683:397): avc: denied { open } for pid=465 comm="recovery" path="/data/data/p1yCV8,68Lj7LegSubBAfML,oqCbPGr1Q0GxPA" dev="mmcblk0p80" ino=3184 scontext=u:r:recovery:s0 tcontext=u:object_r:app_data_file:s0:c138,c256,c512,c768 tclass=dir permissive=1
2704[    5.421595] type=1400 audit(1582811461.683:397): avc: denied { open } for pid=465 comm="recovery" path="/data/data/p1yCV8,68Lj7LegSubBAfML,oqCbPGr1Q0GxPA" dev="mmcblk0p80" ino=3184 scontext=u:r:recovery:s0 tcontext=u:object_r:app_data_file:s0:c138,c256,c512,c768 tclass=dir permissive=1
2705[    5.421604] type=1400 audit(1582811461.683:398): avc: denied { search } for pid=465 comm="recovery" name="p1yCV8,68Lj7LegSubBAfML,oqCbPGr1Q0GxPA" dev="mmcblk0p80" ino=3184 scontext=u:r:recovery:s0 tcontext=u:object_r:app_data_file:s0:c138,c256,c512,c768 tclass=dir permissive=1
2706[    5.423946] type=1400 audit(1582811461.683:398): avc: denied { search } for pid=465 comm="recovery" name="p1yCV8,68Lj7LegSubBAfML,oqCbPGr1Q0GxPA" dev="mmcblk0p80" ino=3184 scontext=u:r:recovery:s0 tcontext=u:object_r:app_data_file:s0:c138,c256,c512,c768 tclass=dir permissive=1
2707[    5.423958] type=1400 audit(1582811461.686:399): avc: denied { getattr } for pid=465 comm="recovery" path="/data/data/WQZReRXyRVnNgF3LcmCSmNL,oqCbPGr1Q0GxPEsx6RP" dev="mmcblk0p80" ino=3213 scontext=u:r:recovery:s0 tcontext=u:object_r:app_data_file:s0:c103,c256,c512,c768 tclass=dir permissive=1
2708[    5.612394] SELinux:  Context u:object_r:greybus_fw_data_file:s0 is not valid (left unmapped).
2709[    5.612462] SELinux:  Context u:object_r:adspd_data_file:s0 is not valid (left unmapped).
2710[    5.668942] SELinux:  Context u:object_r:misc_ne_data_file:s0 is not valid (left unmapped).
2711[    5.782494] SELinux:  Context u:object_r:magisk_file:s0 is not valid (left unmapped).
2712[    5.783821] SELinux:  Context  is not valid (left unmapped).
2713[    5.796042] EXT4-fs (mmcblk0p33): mounted filesystem without journal. Opts:
2714[    5.806095] EXT4-fs (mmcblk0p46): mounted filesystem with ordered data mode. Opts:
2715[    6.701071] type=1400 audit(1582811461.686:399): avc: denied { getattr } for pid=465 comm="recovery" path="/data/data/WQZReRXyRVnNgF3LcmCSmNL,oqCbPGr1Q0GxPEsx6RP" dev="mmcblk0p80" ino=3213 scontext=u:r:recovery:s0 tcontext=u:object_r:app_data_file:s0:c103,c256,c512,c768 tclass=dir permissive=1
2716[    6.701092] type=1400 audit(1582811462.963:541): avc: denied { getattr } for pid=465 comm="recovery" path="/vndservice_contexts" dev="rootfs" ino=11977 scontext=u:r:recovery:s0 tcontext=u:object_r:vndservice_contexts_file:s0 tclass=file permissive=1
2717[    6.701214] type=1400 audit(1582811462.963:541): avc: denied { getattr } for pid=465 comm="recovery" path="/vndservice_contexts" dev="rootfs" ino=11977 scontext=u:r:recovery:s0 tcontext=u:object_r:vndservice_contexts_file:s0 tclass=file permissive=1
2718[    6.701236] type=1400 audit(1582811462.963:542): avc: denied { getattr } for pid=465 comm="recovery" path="/vendor_seapp_contexts" dev="rootfs" ino=11975 scontext=u:r:recovery:s0 tcontext=u:object_r:seapp_contexts_file:s0 tclass=file permissive=1
2719[    6.701290] type=1400 audit(1582811462.963:542): avc: denied { getattr } for pid=465 comm="recovery" path="/vendor_seapp_contexts" dev="rootfs" ino=11975 scontext=u:r:recovery:s0 tcontext=u:object_r:seapp_contexts_file:s0 tclass=file permissive=1
2720[    6.701299] type=1400 audit(1582811462.963:543): avc: denied { getattr } for pid=465 comm="recovery" path="/sepolicy" dev="rootfs" ino=11718 scontext=u:r:recovery:s0 tcontext=u:object_r:sepolicy_file:s0 tclass=file permissive=1
2721[    6.701348] type=1400 audit(1582811462.963:543): avc: denied { getattr } for pid=465 comm="recovery" path="/sepolicy" dev="rootfs" ino=11718 scontext=u:r:recovery:s0 tcontext=u:object_r:sepolicy_file:s0 tclass=file permissive=1
2722[    6.701356] type=1400 audit(1582811462.963:544): avc: denied { getattr } for pid=465 comm="recovery" path="/init" dev="rootfs" ino=11286 scontext=u:r:recovery:s0 tcontext=u:object_r:init_exec:s0 tclass=file permissive=1
2723[    6.856472] audit_log_lost: 10 callbacks suppressed
2724[    6.856474] audit: audit_lost=511 audit_rate_limit=5 audit_backlog_limit=64
2725[    6.856476] audit: rate limit exceeded
2726[    6.856524] type=1400 audit(1582811462.963:544): avc: denied { getattr } for pid=465 comm="recovery" path="/init" dev="rootfs" ino=11286 scontext=u:r:recovery:s0 tcontext=u:object_r:init_exec:s0 tclass=file permissive=1
2727[    6.856537] type=1400 audit(1582811463.120:545): avc: denied { open } for pid=465 comm="recovery" path="/dev/__properties__/u:object_r:bluetooth_prop:s0" dev="tmpfs" ino=18278 scontext=u:r:recovery:s0 tcontext=u:object_r:bluetooth_prop:s0 tclass=file permissive=1
2728[    6.880086] msm_dwc3_perf_vote_work: in_perf_mode:0, interrupts in last sample:0
2729[    8.373384] aw8695_ram_work_routine enter
2730[    8.374372] ueventd: firmware: loading 'aw8695_haptic.bin' for '/devices/platform/soc/4a84000.i2c/i2c-0/0-005a/firmware/aw8695_haptic.bin'
2731[    8.374757] ueventd: loading /devices/platform/soc/4a84000.i2c/i2c-0/0-005a/firmware/aw8695_haptic.bin took 0ms
2732[    8.374825] aw8695_ram_loaded enter
2733[    8.374829] aw8695_ram_loaded: loaded aw8695_haptic.bin - size: 3493
2734[    8.374842] aw8695_ram_loaded: check sum pass : 0x7178
2735[    8.374850] aw8695_container_update enter
2736[    8.375699] aw8695_container_update: base_addr=0x 800
2737[    8.691884] aw8695_container_update exit
2738[    8.691888] aw8695_ram_loaded: fw update complete
2739[    8.692583] aw8695_rtp_update enter
2740[    8.693607] ueventd: firmware: loading 'aw8695_rtp.bin' for '/devices/platform/soc/4a84000.i2c/i2c-0/0-005a/firmware/aw8695_rtp.bin'
2741[    8.695678] ueventd: loading /devices/platform/soc/4a84000.i2c/i2c-0/0-005a/firmware/aw8695_rtp.bin took 2ms
2742[    8.695721] aw8695_rtp_loaded enter
2743[    8.695725] aw8695_rtp_loaded: loaded aw8695_rtp.bin - size: 1444518
2744[    8.695944] aw8695_rtp_loaded: rtp size = 1444518
2745[    8.696893] aw8695_rtp_loaded: rtp update complete
2746[    9.013386] msm_dwc3_perf_vote_work: in_perf_mode:0, interrupts in last sample:0
2747[    9.375490] init: starting service 'time_daemon'...
2748[    9.376645] type=1400 audit(1582811463.120:545): avc: denied { open } for pid=465 comm="recovery" path="/dev/__properties__/u:object_r:bluetooth_prop:s0" dev="tmpfs" ino=18278 scontext=u:r:recovery:s0 tcontext=u:object_r:bluetooth_prop:s0 tclass=file permissive=1
2749[    9.376675] type=1400 audit(1582811465.640:647): avc: denied { dac_read_search } for pid=1 comm="init" capability=2 scontext=u:r:init:s0 tcontext=u:r:init:s0 tclass=capability permissive=1
2750[    9.388151] type=1400 audit(1582811465.640:647): avc: denied { dac_read_search } for pid=1 comm="init" capability=2 scontext=u:r:init:s0 tcontext=u:r:init:s0 tclass=capability permissive=1
2751[    9.388168] type=1400 audit(1582811465.650:648): avc: denied { read } for pid=549 comm="time_daemon" name="rtc0" dev="tmpfs" ino=18419 scontext=u:r:recovery:s0 tcontext=u:object_r:rtc_device:s0 tclass=chr_file permissive=1
2752[    9.388489] type=1400 audit(1582811465.650:648): avc: denied { read } for pid=549 comm="time_daemon" name="rtc0" dev="tmpfs" ino=18419 scontext=u:r:recovery:s0 tcontext=u:object_r:rtc_device:s0 tclass=chr_file permissive=1
2753[    9.388501] type=1400 audit(1582811465.650:649): avc: denied { open } for pid=549 comm="time_daemon" path="/dev/rtc0" dev="tmpfs" ino=18419 scontext=u:r:recovery:s0 tcontext=u:object_r:rtc_device:s0 tclass=chr_file permissive=1
2754[    9.388559] type=1400 audit(1582811465.650:649): avc: denied { open } for pid=549 comm="time_daemon" path="/dev/rtc0" dev="tmpfs" ino=18419 scontext=u:r:recovery:s0 tcontext=u:object_r:rtc_device:s0 tclass=chr_file permissive=1
2755[    9.388570] type=1400 audit(1582811465.650:650): avc: denied { ioctl } for pid=549 comm="time_daemon" path="/dev/rtc0" dev="tmpfs" ino=18419 ioctlcmd=0x7009 scontext=u:r:recovery:s0 tcontext=u:object_r:rtc_device:s0 tclass=chr_file permissive=1
2756[    9.394785] type=1400 audit(1582811465.650:650): avc: denied { ioctl } for pid=549 comm="time_daemon" path="/dev/rtc0" dev="tmpfs" ino=18419 ioctlcmd=0x7009 scontext=u:r:recovery:s0 tcontext=u:object_r:rtc_device:s0 tclass=chr_file permissive=1
2757[    9.394805] type=1400 audit(1582811465.656:651): avc: denied { sys_time } for pid=549 comm="time_daemon" capability=25 scontext=u:r:recovery:s0 tcontext=u:r:recovery:s0 tclass=capability permissive=1
2758[    9.451725] init: starting service 'adbd'...
2759[    9.453095] init: Created socket '/dev/socket/adbd', mode 660, user 1000, group 1000
2760[    9.457821] read descriptors
2761[    9.457897] read strings
2762[    9.458468] init: processing action (sys.usb.config=adb && sys.usb.ffs.ready=1) from (/init.recovery.usb.rc:113)
2763[    9.459525] msm-dwc3 4e00000.ssusb: DWC3_CONTROLLER_NOTIFY_OTG_EVENT received
2764[    9.459541] msm-dwc3 4e00000.ssusb: SDP CHK: rescheduled
2765[    9.459551] msm-dwc3 4e00000.ssusb: DWC3_GSI_EVT_BUF_SETUP
2766[    9.459558] msm-dwc3 4e00000.ssusb: Evt buf 0000000000000000 dma fcc5f000 length 4096
2767[    9.459567] msm-dwc3 4e00000.ssusb: Evt buf 0000000000000000 dma fcc6a000 length 4096
2768[    9.459576] msm-dwc3 4e00000.ssusb: Evt buf 0000000000000000 dma fcc6b000 length 4096
2769[    9.463446] android_work: did not send uevent (0 0 0000000000000000)
2770[    9.586925] msm-dwc3 4e00000.ssusb: DWC3_CONTROLLER_NOTIFY_OTG_EVENT received
2771[    9.586941] msm-dwc3 4e00000.ssusb: DWC3_CONTROLLER_SET_CURRENT_DRAW_EVENT received
2772[    9.586978] msm-dwc3 4e00000.ssusb: Avail curr from USB = 100
2773[    9.597356] msm-dwc3 4e00000.ssusb: DWC3_CONTROLLER_CONNDONE_EVENT received
2774[    9.646660] android_work: sent uevent USB_STATE=CONNECTED
2775[    9.647648] msm-dwc3 4e00000.ssusb: DWC3_CONTROLLER_NOTIFY_OTG_EVENT received
2776[    9.647661] msm-dwc3 4e00000.ssusb: DWC3_CONTROLLER_SET_CURRENT_DRAW_EVENT received
2777[    9.647735] android_work: sent uevent USB_STATE=DISCONNECTED
2778[    9.658386] msm-dwc3 4e00000.ssusb: DWC3_CONTROLLER_CONNDONE_EVENT received
2779[    9.719819] android_work: sent uevent USB_STATE=CONNECTED
2780[    9.751787] configfs-gadget gadget: full-speed config #1: b
2781[    9.751862] msm-dwc3 4e00000.ssusb: DWC3_CONTROLLER_SET_CURRENT_DRAW_EVENT received
2782[    9.751874] msm-dwc3 4e00000.ssusb: SDP CHK: cancelled
2783[    9.751896] msm-dwc3 4e00000.ssusb: Avail curr from USB = 500
2784[    9.752104] pmi632_charger: smblib_run_aicl: re-running AICL
2785[    9.752164] android_work: sent uevent USB_STATE=CONFIGURED
2786[   10.395754] type=1400 audit(1582811465.656:651): avc: denied { sys_time } for pid=549 comm="time_daemon" capability=25 scontext=u:r:recovery:s0 tcontext=u:r:recovery:s0 tclass=capability permissive=1
2787[   10.395775] type=1400 audit(1582811465.889:652): avc: denied { read } for pid=465 comm="recovery" scontext=u:r:recovery:s0 tcontext=u:r:recovery:s0 tclass=netlink_kobject_uevent_socket permissive=1
2788[   11.146752] msm_dwc3_perf_vote_work: in_perf_mode:0, interrupts in last sample:80
2789[   13.280089] msm_dwc3_perf_vote_work: in_perf_mode:0, interrupts in last sample:0
2790[   15.413386] msm_dwc3_perf_vote_work: in_perf_mode:0, interrupts in last sample:0
2791[   17.546762] msm_dwc3_perf_vote_work: in_perf_mode:0, interrupts in last sample:0
2792[   19.680089] msm_dwc3_perf_vote_work: in_perf_mode:0, interrupts in last sample:0
2793[   21.813419] msm_dwc3_perf_vote_work: in_perf_mode:0, interrupts in last sample:0
2794[   23.946756] msm_dwc3_perf_vote_work: in_perf_mode:0, interrupts in last sample:0
2795[   26.080085] msm_dwc3_perf_vote_work: in_perf_mode:0, interrupts in last sample:0
2796[   28.213416] msm_dwc3_perf_vote_work: in_perf_mode:0, interrupts in last sample:0
2797[   30.346754] msm_dwc3_perf_vote_work: in_perf_mode:0, interrupts in last sample:0
2798[   32.480084] msm_dwc3_perf_vote_work: in_perf_mode:0, interrupts in last sample:0
2799[   34.613421] msm_dwc3_perf_vote_work: in_perf_mode:0, interrupts in last sample:0
2800[   35.603368] pmi632_charger: mmi_basic_charge_sm: SMBMMI: batt_mv = 4338, batt_ma 327, batt_soc 100, batt_temp 21, usb_mv 5030, dc_mv 0, cp 1, vp 1 dp 0
2801[   35.603379] pmi632_charger: mmi_basic_charge_sm: SMBMMI: Step State = MAX, Temp Zone 3, Health 1
2802[   35.603382] pmi632_charger: mmi_basic_charge_sm: SMBMMI: IMPOSED: FV = 4200000, CDIS = 0, FCC = 3000000, USBICL = 500000
2803[   35.603406] power_supply battery: smb_mmi_power_supply_changed: POWER_SUPPLY_CHARGE_RATE=Normal
2804[   35.603662] QG-K: qg_status_change_work: charge_status=1 charge_done=0
2805[   35.624762] QG-K: qg_charge_full_update: msoc=100 health=1 charge_full=0 charge_done=0
2806[   36.746781] msm_dwc3_perf_vote_work: in_perf_mode:0, interrupts in last sample:0
2807[   38.880061] msm_dwc3_perf_vote_work: in_perf_mode:0, interrupts in last sample:0
2808[   41.013424] msm_dwc3_perf_vote_work: in_perf_mode:0, interrupts in last sample:0
2809[   43.146749] msm_dwc3_perf_vote_work: in_perf_mode:0, interrupts in last sample:0
2810[   45.280079] msm_dwc3_perf_vote_work: in_perf_mode:0, interrupts in last sample:0
2811[   47.413414] msm_dwc3_perf_vote_work: in_perf_mode:0, interrupts in last sample:0
2812[   49.546748] msm_dwc3_perf_vote_work: in_perf_mode:0, interrupts in last sample:0
2813[   51.680077] msm_dwc3_perf_vote_work: in_perf_mode:0, interrupts in last sample:0
2814[   53.813413] msm_dwc3_perf_vote_work: in_perf_mode:0, interrupts in last sample:0
2815[   55.946743] msm_dwc3_perf_vote_work: in_perf_mode:0, interrupts in last sample:0
2816[   58.080077] msm_dwc3_perf_vote_work: in_perf_mode:0, interrupts in last sample:0
2817[   60.213408] msm_dwc3_perf_vote_work: in_perf_mode:0, interrupts in last sample:0
2818[   62.346746] msm_dwc3_perf_vote_work: in_perf_mode:0, interrupts in last sample:0
2819[   64.480074] msm_dwc3_perf_vote_work: in_perf_mode:0, interrupts in last sample:0
2820[   65.613448] QG-K: qg_fifo_update_done_handler: IRQ triggered
2821[   65.616848] QG-K: qg_esr_estimate: Skip CHG ESR, Fails IBAT ibat(419769) min_ibat(-450000)
2822[   65.861628] type=1400 audit(1582811465.889:652): avc: denied { read } for pid=465 comm="recovery" scontext=u:r:recovery:s0 tcontext=u:r:recovery:s0 tclass=netlink_kobject_uevent_socket permissive=1
2823[   65.861644] type=1400 audit(1582811521.352:653): avc: denied { write } for pid=465 comm="recovery" name="brightness" dev="sysfs" ino=36362 scontext=u:r:recovery:s0 tcontext=u:object_r:sysfs:s0 tclass=file permissive=1
2824[   66.613371] msm_dwc3_perf_vote_work: in_perf_mode:0, interrupts in last sample:0
2825[   67.981905] pmi632_charger: wdog_bark_irq_handler: IRQ: wdog-bark
2826[   68.746739] msm_dwc3_perf_vote_work: in_perf_mode:0, interrupts in last sample:0
2827[   70.880076] msm_dwc3_perf_vote_work: in_perf_mode:0, interrupts in last sample:0
2828[   73.013376] msm_dwc3_perf_vote_work: in_perf_mode:0, interrupts in last sample:0
2829doha:/ #
2830
2831Module                  Size  Used by
2832watchdogtest           16384  0
2833watchdog_cpu_ctx       20480  0
2834utags                  36864  0
2835tzlog_dump             16384  0
2836tps61280               16384  0
2837sx933x_sar             28672  0
2838stmvl53l0             102400  0
2839sensors_class          20480  1 sx933x_sar
2840rdbg                   20480  0
2841qpnp_smbcharger_mmi    90112  0
2842mpq_dmx_hw_plugin      69632  0
2843mpq_adapter            24576  1 mpq_dmx_hw_plugin
2844moto_f_usbnet          24576  0
2845mmi_sys_temp           16384  0
2846mmi_info               28672  2 watchdog_cpu_ctx,tzlog_dump
2847mmi_annotate           16384  3 watchdog_cpu_ctx,tzlog_dump,mmi_info
2848himax_v2_mmi_hx83112    24576  0
2849himax_v2_mmi          225280  0
2850gpio_tacna             16384  0
2851focaltech_0flash_mmi   176128  0
2852exfat                 147456  0
2853ets_fps_mmi            32768  0
2854cirrus_wm_adsp         69632  0
2855cirrus_tacna_core      36864  0
2856cirrus_tacna           90112  0
2857cirrus_pinctrl_tacna    20480  0
2858cirrus_irq_tacna       16384  0
2859aw8695                 65536  0
2860arizona_micsupp        16384  1
2861arizona_ldo1           16384  0