· 5 years ago · Oct 30, 2020, 04:10 PM
1U-Boot SPL 2020.04 (Oct 21 2020 - 11:11:15 +0100)
2Trying to boot from MMC1
3
4
5U-Boot 2020.04 (Oct 21 2020 - 11:11:15 +0100)
6
7CPU : AM335X-GP rev 2.1
8Model: TI AM335x BeagleBone Black
9DRAM: 512 MiB
10WDT: Started with servicing (60s timeout)
11NAND: 0 MiB
12MMC: OMAP SD/MMC: 0, OMAP SD/MMC: 1
13Loading Environment from FAT... *** Warning - bad CRC, using default environment
14
15<ethaddr> not set. Validating first E-fuse MAC
16Net: eth0: ethernet@4a100000
17Warning: usb_ether MAC addresses don't match:
18Address in ROM is de:ad:be:ef:00:01
19Address in environment is 38:d2:69:38:91:0d
20, eth1: usb_ether
21Hit any key to stop autoboot: 0
22switch to partitions #0, OK
23mmc0 is current device
24SD/MMC found on device 0
25434 bytes read in 2 ms (211.9 KiB/s)
26Loaded env from uEnv.txt
27Importing environment from mmc0 ...
28Running uenvcmd ...
296090952 bytes read in 392 ms (14.8 MiB/s)
3040817 bytes read in 5 ms (7.8 MiB/s)
31bootargs=console=ttyS0,115200n8 root=/dev/mmcblk0p2 rw rootfstype=ext4 rootwait
32## Flattened Device Tree blob at 88000000
33 Booting using the fdt blob at 0x88000000
34 Loading Device Tree to 8fff3000, end 8fffff70 ... OK
35
36Starting kernel ...
37
38[ 0.000000] Booting Linux on physical CPU 0x0
39[ 0.000000] Linux version 4.19.79 (ut1@DebianBuild) (gcc version 9.3.0 (Buildroot 2020.08-947-ga2b344a34d)) #1 SMP Wed Oct 21 11:12:32 BST 2020
40[ 0.000000] CPU: ARMv7 Processor [413fc082] revision 2 (ARMv7), cr=10c5387d
41[ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
42[ 0.000000] OF: fdt: Machine model: TI AM335x BeagleBone Black
43[ 0.000000] Memory policy: Data cache writeback
44[ 0.000000] cma: Reserved 16 MiB at 0x9e800000
45[ 0.000000] CPU: All CPU(s) started in SVC mode.
46[ 0.000000] AM335X ES2.1 (sgx neon)
47[ 0.000000] random: get_random_bytes called from start_kernel+0x90/0x4b4 with crng_init=0
48[ 0.000000] percpu: Embedded 17 pages/cpu s38056 r8192 d23384 u69632
49[ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 129412
50[ 0.000000] Kernel command line: console=ttyS0,115200n8 root=/dev/mmcblk0p2 rw rootfstype=ext4 rootwait
51[ 0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
52[ 0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
53[ 0.000000] Memory: 478956K/522240K available (9216K kernel code, 804K rwdata, 2680K rodata, 1024K init, 7473K bss, 26900K reserved, 16384K cma-reserved, 0K highmem)
54[ 0.000000] Virtual kernel memory layout:
55[ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB)
56[ 0.000000] fixmap : 0xffc00000 - 0xfff00000 (3072 kB)
57[ 0.000000] vmalloc : 0xe0000000 - 0xff800000 ( 504 MB)
58[ 0.000000] lowmem : 0xc0000000 - 0xdfe00000 ( 510 MB)
59[ 0.000000] pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB)
60[ 0.000000] modules : 0xbf000000 - 0xbfe00000 ( 14 MB)
61[ 0.000000] .text : 0x(ptrval) - 0x(ptrval) (10208 kB)
62[ 0.000000] .init : 0x(ptrval) - 0x(ptrval) (1024 kB)
63[ 0.000000] .data : 0x(ptrval) - 0x(ptrval) ( 805 kB)
64[ 0.000000] .bss : 0x(ptrval) - 0x(ptrval) (7474 kB)
65[ 0.000000] Running RCU self tests
66[ 0.000000] rcu: Hierarchical RCU implementation.
67[ 0.000000] rcu: RCU event tracing is enabled.
68[ 0.000000] rcu: RCU lockdep checking is enabled.
69[ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=2 to nr_cpu_ids=1.
70[ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=1
71[ 0.000000] NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16
72[ 0.000000] IRQ: Found an INTC at 0x(ptrval) (revision 5.0) with 128 interrupts
73[ 0.000000] OMAP clockevent source: timer2 at 24000000 Hz
74[ 0.000018] sched_clock: 32 bits at 24MHz, resolution 41ns, wraps every 89478484971ns
75[ 0.000053] clocksource: timer1: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 79635851949 ns
76[ 0.000117] OMAP clocksource: timer1 at 24000000 Hz
77[ 0.000711] timer_probe: no matching timers found
78[ 0.001681] Console: colour dummy device 80x30
79[ 0.001745] Lock dependency validator: Copyright (c) 2006 Red Hat, Inc., Ingo Molnar
80[ 0.001763] ... MAX_LOCKDEP_SUBCLASSES: 8
81[ 0.001779] ... MAX_LOCK_DEPTH: 48
82[ 0.001795] ... MAX_LOCKDEP_KEYS: 8191
83[ 0.001810] ... CLASSHASH_SIZE: 4096
84[ 0.001826] ... MAX_LOCKDEP_ENTRIES: 32768
85[ 0.001842] ... MAX_LOCKDEP_CHAINS: 65536
86[ 0.001858] ... CHAINHASH_SIZE: 32768
87[ 0.001873] memory used by lock dependency info: 4655 kB
88[ 0.001890] per task-struct memory footprint: 1536 bytes
89[ 0.001982] Calibrating delay loop... 996.14 BogoMIPS (lpj=4980736)
90[ 0.078454] pid_max: default: 32768 minimum: 301
91[ 0.078903] Security Framework initialized
92[ 0.079047] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)
93[ 0.079072] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes)
94[ 0.082423] CPU: Testing write buffer coherency: ok
95[ 0.082612] CPU0: Spectre v2: using BPIALL workaround
96[ 0.084160] CPU0: thread -1, cpu 0, socket -1, mpidr 0
97[ 0.086581] Setting up static identity map for 0x80100000 - 0x80100078
98[ 0.087237] rcu: Hierarchical SRCU implementation.
99[ 0.089423] smp: Bringing up secondary CPUs ...
100[ 0.089457] smp: Brought up 1 node, 1 CPU
101[ 0.089477] SMP: Total of 1 processors activated (996.14 BogoMIPS).
102[ 0.089496] CPU: All CPU(s) started in SVC mode.
103[ 0.093597] devtmpfs: initialized
104[ 0.123945] VFP support v0.3: implementor 41 architecture 3 part 30 variant c rev 3
105[ 0.124775] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
106[ 0.124847] futex hash table entries: 256 (order: 2, 16384 bytes)
107[ 0.126553] pinctrl core: initialized pinctrl subsystem
108[ 0.131910] NET: Registered protocol family 16
109[ 0.139401] DMA: preallocated 256 KiB pool for atomic coherent allocations
110[ 0.249417] audit: initializing netlink subsys (disabled)
111[ 0.252302] cpuidle: using governor menu
112[ 0.267111] audit: type=2000 audit(0.250:1): state=initialized audit_enabled=0 res=1
113[ 0.268726] OMAP GPIO hardware version 0.1
114[ 0.297629] No ATAGs?
115[ 0.297657] hw-breakpoint: debug architecture 0x4 unsupported.
116[ 0.336412] edma 49000000.edma: TI EDMA DMA engine driver
117[ 0.343501] vgaarb: loaded
118[ 0.344643] SCSI subsystem initialized
119[ 0.349792] omap_i2c 4819c000.i2c: bus 2 rev0.11 at 100 kHz
120[ 0.350271] pps_core: LinuxPPS API ver. 1 registered
121[ 0.350297] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
122[ 0.350354] PTP clock support registered
123[ 0.354604] clocksource: Switched to clocksource timer1
124[ 0.511214] VFS: Disk quotas dquot_6.6.0
125[ 0.511418] VFS: Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
126[ 0.539305] NET: Registered protocol family 2
127[ 0.541612] tcp_listen_portaddr_hash hash table entries: 256 (order: 1, 10240 bytes)
128[ 0.541706] TCP established hash table entries: 4096 (order: 2, 16384 bytes)
129[ 0.541807] TCP bind hash table entries: 4096 (order: 5, 147456 bytes)
130[ 0.542373] TCP: Hash tables configured (established 4096 bind 4096)
131[ 0.542772] UDP hash table entries: 256 (order: 2, 20480 bytes)
132[ 0.542888] UDP-Lite hash table entries: 256 (order: 2, 20480 bytes)
133[ 0.543346] NET: Registered protocol family 1
134[ 0.546538] RPC: Registered named UNIX socket transport module.
135[ 0.546621] RPC: Registered udp transport module.
136[ 0.546640] RPC: Registered tcp transport module.
137[ 0.546658] RPC: Registered tcp NFSv4.1 backchannel transport module.
138[ 0.550049] hw perfevents: enabled with armv7_cortex_a8 PMU driver, 5 counters available
139[ 0.554915] Initialise system trusted keyrings
140[ 0.556047] workingset: timestamp_bits=14 max_order=17 bucket_order=3
141[ 0.559515] NFS: Registering the id_resolver key type
142[ 0.559691] Key type id_resolver registered
143[ 0.559762] Key type id_legacy registered
144[ 0.559933] jffs2: version 2.2. (NAND) (SUMMARY) © 2001-2006 Red Hat, Inc.
145[ 0.568071] Key type asymmetric registered
146[ 0.568305] Asymmetric key parser 'x509' registered
147[ 0.568495] io scheduler noop registered
148[ 0.568522] io scheduler deadline registered
149[ 0.568724] io scheduler cfq registered (default)
150[ 0.568750] io scheduler mq-deadline registered
151[ 0.568769] io scheduler kyber registered
152[ 0.571630] pinctrl-single 44e10800.pinmux: 142 pins, size 568
153[ 0.580131] Serial: 8250/16550 driver, 6 ports, IRQ sharing enabled
154[ 0.592892] console [ttyS0] disabled
155[ 0.593412] 44e09000.serial: ttyS0 at MMIO 0x44e09000 (irq = 30, base_baud = 3000000) is a 8250
156[ 1.270258] console [ttyS0] enabled
157[ 1.307659] brd: module loaded
158[ 1.339365] loop: module loaded
159[ 1.345583] mtdoops: mtd device (mtddev=name/number) must be supplied
160[ 1.355569] libphy: Fixed MDIO Bus: probed
161[ 1.434613] davinci_mdio 4a101000.mdio: davinci mdio revision 1.6, bus freq 1000000
162[ 1.442376] davinci_mdio 4a101000.mdio: detected phy mask fffffffe
163[ 1.449446] MDIO: davinci_mdio: dt: updated phy_id[0] from phy_mask[fffffffe]
164[ 1.461491] libphy: 4a101000.mdio: probed
165[ 1.465801] davinci_mdio 4a101000.mdio: phy[0]: device 4a101000.mdio:00, driver SMSC LAN8710/LAN8720
166[ 1.476853] cpsw 4a100000.ethernet: Detected MACID = 38:d2:69:38:91:0b
167[ 1.483839] cpsw 4a100000.ethernet: initialized cpsw ale version 1.4
168[ 1.490417] cpsw 4a100000.ethernet: ALE Table size 1024
169[ 1.495823] cpsw 4a100000.ethernet: cpts: overflow check period 500 (jiffies)
170[ 1.506742] i2c /dev entries driver
171[ 1.516101] sdhci: Secure Digital Host Controller Interface driver
172[ 1.522345] sdhci: Copyright(c) Pierre Ossman
173[ 1.528311] omap_gpio 44e07000.gpio: Could not set line 6 debounce to 200000 microseconds (-22)
174[ 1.537217] omap_hsmmc 48060000.mmc: Got CD GPIO
175[ 1.543675] omap_hsmmc 48060000.mmc: Linked as a consumer to regulator.1
176[ 1.580871] omap_hsmmc 481d8000.mmc: Linked as a consumer to regulator.1
177[ 1.613341] sdhci-pltfm: SDHCI platform and OF driver helper
178[ 1.620431] ledtrig-cpu: registered to indicate activity on CPUs
179[ 1.629823] oprofile: using arm/armv7
180[ 1.634602] Initializing XFRM netlink socket
181[ 1.639480] NET: Registered protocol family 10
182[ 1.648850] Segment Routing with IPv6
183[ 1.652702] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver
184[ 1.660925] NET: Registered protocol family 17
185[ 1.665646] NET: Registered protocol family 15
186[ 1.670480] Key type dns_resolver registered
187[ 1.675036] ThumbEE CPU extension supported.
188[ 1.679366] Registering SWP/SWPB emulation handler
189[ 1.684198] omap_voltage_late_init: Voltage driver support not added
190[ 1.690694] sr_dev_init: Unknown instance smartreflex0
191[ 1.696396] SmartReflex Class3 initialized
192[ 1.705041] Loading compiled-in X.509 certificates
193[ 1.762153] mmc0: host does not support reading read-only switch, assuming write-enable
194[ 1.774906] mmc0: new high speed SDHC card at address aaaa
195[ 1.785637] mmcblk0: mmc0:aaaa SA08G 7.40 GiB
196[ 1.797933] mmcblk0: p1 p2
197[ 1.806101] random: fast init done
198[ 1.837107] mmc1: new high speed MMC card at address 0001
199[ 1.846452] mmcblk1: mmc1:0001 M62704 1.77 GiB
200[ 1.852902] mmcblk1boot0: mmc1:0001 M62704 partition 1 2.00 MiB
201[ 1.860911] mmcblk1boot1: mmc1:0001 M62704 partition 2 2.00 MiB
202[ 1.868432] tps65217 0-0024: TPS65217 ID 0xe version 1.2
203[ 1.875007] omap_i2c 44e0b000.i2c: bus 0 rev0.11 at 400 kHz
204[ 1.881345] mmcblk1rpmb: mmc1:0001 M62704 partition 3 512 KiB, chardev (248:0)
205[ 1.892185] hctosys: unable to open rtc device (rtc0)
206[ 1.897466] sr_init: No PMIC hook to init smartreflex
207[ 1.905710] mmcblk1: p1 p2
208[ 1.940164] EXT4-fs (mmcblk0p2): recovery complete
209[ 1.946242] EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. Opts: (null)
210[ 1.954704] VFS: Mounted root (ext4 filesystem) on device 179:2.
211[ 1.964097] devtmpfs: mounted
212[ 1.969832] Freeing unused kernel memory: 1024K
213[ 1.975428] Run /sbin/init as init process
214[ 2.098009] EXT4-fs (mmcblk0p2): re-mounted. Opts: (null)
215Starting syslogd: OK
216Starting klogd: OK
217Running sysctl: OK
218Initializing random number generator: OK
219Saving random seed: [ 2.501295] random: dd: uninitialized urandom read (512 bytes read)
220OK
221Starting network: OK
222
223Welcome to Buildroot
224buildroot login:
225