· 6 years ago · Apr 13, 2019, 10:38 PM
1clé msieurlolo
2
3
4
5Djeman ULC Bootloader, Revision 1.00
6Press W key to start on Wince Explorer.
7files: 88300054, address: 88300074, jump: 0
8Freq: 250000, Pbus: 183000000, Divisor: 366, Real freq: 249318
9.................................................................................................................................................................................................................................ocr:C0FF8080
10High Capacity = 1
11CSD MMC spec version 4
12WR_REL_SET : 0x1F
13Freq: 26000000, Pbus: 183000000, Divisor: 3, Real freq: 22875000
14MMC/SD Bus Width : 8
15Initalizing USB subsystem
16USB0: scanning bus 0 for devices... |usb_alloc_new_device(869)| New Device 0
17|usb_control_msg(246)| usb_control_msg: request: 0x6, requesttype: 0x80, value 0x100 index 0x0 length 0x40
18|usb_set_address(616)| set address 1
19|usb_control_msg(246)| usb_control_msg: request: 0x5, requesttype: 0x0, value 0x1 index 0x0 length 0x0
20|usb_control_msg(246)| usb_control_msg: request: 0x6, requesttype: 0x80, value 0x100 index 0x0 length 0x12
21|usb_control_msg(246)| usb_control_msg: request: 0x6, requesttype: 0x80, value 0x200 index 0x0 length 0x9
22|usb_control_msg(246)| usb_control_msg: request: 0x6, requesttype: 0x80, value 0x200 index 0x0 length 0x19
23|usb_get_configuration_no(602)| get_conf_no 0 Result 25, wLength 25
24|usb_parse_config(476)| if 0, ep 0
25|usb_set_maxpacket_ep(354)| ##EP epmaxpacketin[1] = 2
26|usb_set_configuration(668)| set configuration 1
27|usb_control_msg(246)| usb_control_msg: request: 0x9, requesttype: 0x0, value 0x1 index 0x0 length 0x0
28|usb_select_config(1117)| new device strings: Mfr=0, Product=1, SerialNumber=0
29|usb_control_msg(246)| usb_control_msg: request: 0x6, requesttype: 0x80, value 0x300 index 0x0 length 0xFF
30|usb_string(828)| USB device number 1 default language ID 0x409
31|usb_control_msg(246)| usb_control_msg: request: 0x6, requesttype: 0x80, value 0x301 index 0x409 length 0xFF
32|usb_select_config(1130)| Manufacturer
33|usb_select_config(1131)| Product OHCI Root Hub
34|usb_select_config(1132)| SerialNumber
35|usb_hub_check(647)| USB hub found
36|usb_control_msg(246)| usb_control_msg: request: 0x6, requesttype: 0xA0, value 0x2900 index 0x0 length 0x4
37|usb_control_msg(246)| usb_control_msg: request: 0x6, requesttype: 0xA0, value 0x2900 index 0x0 length 0x9
38|usb_hub_configure(525)| 1 ports detected
39|usb_hub_configure(530)| ganged power switching
40|usb_hub_configure(544)| standalone hub
41|usb_hub_configure(548)| global over-current protection
42|usb_hub_configure(560)| power on to power good time: 4ms
43|usb_hub_configure(562)| hub controller current requirement: 0mA
44|usb_hub_configure(567)| port 1 is removable
45|usb_control_msg(246)| usb_control_msg: request: 0x0, requesttype: 0xA0, value 0x0 index 0x0 length 0x4
46|usb_hub_configure(588)| get_hub_status returned status 0, change 0
47|usb_hub_configure(591)| local power source is good
48|usb_hub_configure(594)| no over-current condition exists
49|usb_hub_power_on(80)| enabling power on all ports
50|usb_control_msg(246)| usb_control_msg: request: 0x3, requesttype: 0x23, value 0x8 index 0x1 length 0x0
51|usb_hub_power_on(83)| port 1 returns 0
52|usb_hub_power_on(86)| pgood_delay=4ms
53|usb_hub_power_on(102)| devnum=1 poweron: query_delay=100 connect_timeout=1100
54|usb_scan_port(307)| scan port 0
55|usb_control_msg(246)| usb_control_msg: request: 0x0, requesttype: 0xA3, value 0x0 index 0x1 length 0x4
56|usb_scan_port(335)| Port 1 Status 101 Change 1
57|usb_scan_port(356)| devnum=1 port=1: USB dev found
58|usb_control_msg(246)| usb_control_msg: request: 0x0, requesttype: 0xA3, value 0x0 index 0x1 length 0x4
59|usb_hub_port_connect_change(231)| portstatus 101, change 101, 12 Mb/s
60|usb_control_msg(246)| usb_control_msg: request: 0x1, requesttype: 0x23, value 0x10 index 0x1 length 0x0
61|legacy_hub_port_reset(154)| legacy_hub_port_reset: resetting port 1...
62|usb_control_msg(246)| usb_control_msg: request: 0x3, requesttype: 0x23, value 0x4 index 0x1 length 0x0
63|usb_control_msg(246)| usb_control_msg: request: 0x0, requesttype: 0xA3, value 0x0 index 0x1 length 0x4
64|legacy_hub_port_reset(171)| portstatus 103, change 10, 12 Mb/s
65|legacy_hub_port_reset(176)| STAT_C_CONNECTION = 0 STAT_CONNECTION = 1USB_PORT_STAT_ENABLE 1
66|usb_control_msg(246)| usb_control_msg: request: 0x1, requesttype: 0x23, value 0x14 index 0x1 length 0x0
67|usb_alloc_new_device(869)| New Device 1
68|usb_control_msg(246)| usb_control_msg: request: 0x6, requesttype: 0x80, value 0x100 index 0x0 length 0x40
69|usb_set_address(616)| set address 2
70|usb_control_msg(246)| usb_control_msg: request: 0x5, requesttype: 0x0, value 0x2 index 0x0 length 0x0
71|usb_control_msg(246)| usb_control_msg: request: 0x6, requesttype: 0x80, value 0x100 index 0x0 length 0x12
72|usb_control_msg(246)| usb_control_msg: request: 0x6, requesttype: 0x80, value 0x200 index 0x0 length 0x9
73|usb_control_msg(246)| usb_control_msg: request: 0x6, requesttype: 0x80, value 0x200 index 0x0 length 0x20
74|usb_get_configuration_no(602)| get_conf_no 0 Result 32, wLength 32
75|usb_parse_config(476)| if 0, ep 0
76|usb_parse_config(476)| if 0, ep 1
77|usb_set_maxpacket_ep(347)| ##EP epmaxpacketout[1] = 64
78|usb_set_maxpacket_ep(354)| ##EP epmaxpacketin[2] = 64
79|usb_set_configuration(668)| set configuration 1
80|usb_control_msg(246)| usb_control_msg: request: 0x9, requesttype: 0x0, value 0x1 index 0x0 length 0x0
81|usb_select_config(1117)| new device strings: Mfr=1, Product=2, SerialNumber=0
82|usb_control_msg(246)| usb_control_msg: request: 0x6, requesttype: 0x80, value 0x300 index 0x0 length 0xFF
83|usb_string(828)| USB device number 2 default language ID 0x409
84|usb_control_msg(246)| usb_control_msg: request: 0x6, requesttype: 0x80, value 0x301 index 0x409 length 0xFF
85|usb_control_msg(246)| usb_control_msg: request: 0x6, requesttype: 0x80, value 0x302 index 0x409 length 0xFF
86|usb_select_config(1130)| Manufacturer Alcor Micro
87|usb_select_config(1131)| Product Mass Storage Device
88|usb_select_config(1132)| SerialNumber
89|usb_hub_check(653)| USB hub not found: bInterfaceClass=8, bInterfaceSubClass=6, bNumEndpoints=2
90|usb_device_list_scan(442)| list_empty
912 USB Device(s) found
92|usb_init(134)| scan end
93 1 Hub (12 Mb/s, 0mA)
94 | OHCI Root Hub
95 |
96 +-2 Mass Storage (12 Mb/s, 100mA)
97 Alcor Micro Mass Storage Device
98
99Scanning Storage devices
100 scanning usb for storage devices...
101|usb_stor_scan(264)| i=0
102|usb_stor_probe_device(193)|
103
104Probing for storage
105|usb_stor_scan(264)| i=1
106|usb_stor_probe_device(193)|
107
108Probing for storage
109|usb_storage_probe(1186)|
110
111USB Mass Storage device detected
112|usb_storage_probe(1197)| Transport: |usb_storage_probe(1211)| Bulk/Bulk/Bulk
113|usb_storage_probe(1248)| Endpoints In 2 Out 1 Int 0
114|usb_control_msg(246)| usb_control_msg: request: 0xFE, requesttype: 0xA1, value 0x0 index 0x0 length 0x1
115|usb_get_max_lun(181)| Get Max LUN -> len = 1, result = 0
116|usb_stor_get_info(1293)| address 2
117|usb_stor_BBB_transport(650)| COMMAND phase
118|usb_stor_BBB_transport(668)| DATA phase
119|usb_stor_BBB_transport(701)| STATUS phase
120|usb_inquiry(880)| inquiry returns 0
121|usb_stor_get_info(1326)| ISO Vers 4, Response Data 2
122|usb_stor_BBB_transport(650)| COMMAND phase
123|usb_stor_BBB_transport(701)| STATUS phase
124|usb_stor_BBB_transport(751)| FAILED
125|usb_stor_BBB_transport(650)| COMMAND phase
126|usb_stor_BBB_transport(668)| DATA phase
127|usb_stor_BBB_transport(701)| STATUS phase
128|usb_request_sense(906)| Request Sense returned 02 3A 00
129Device NOT ready
130 Request Sense returned 0x2 0x3a 0x0
131|usb_stor_probe_device(233)| usb_stor_probe_device: Found device
132|usb_stor_scan(264)| i=2
1331 Storage Device(s) found
134|usb_stor_read(1032)|
135usb_read: device 0 with block size = 0x0
136|usb_stor_read(1049)|
137usb_read: udev 2 startblk 0, blccnt 1 buffer 88540550
138|usb_read_10(972)| read10: start 0x0 blocks 1
139|usb_stor_BBB_transport(650)| COMMAND phase
140|usb_stor_BBB_transport(701)| STATUS phase
141|usb_stor_BBB_transport(751)| FAILED
142|usb_stor_read(1065)| Read ERROR
143|usb_stor_BBB_transport(650)| COMMAND phase
144|usb_stor_BBB_transport(668)| DATA phase
145|usb_stor_BBB_transport(701)| STATUS phase
146|usb_request_sense(906)| Request Sense returned 05 26 00
147|usb_read_10(972)| read10: start 0x0 blocks 1
148|usb_stor_BBB_transport(650)| COMMAND phase
149|usb_stor_BBB_transport(701)| STATUS phase
150|usb_stor_BBB_transport(751)| FAILED
151|usb_stor_read(1065)| Read ERROR
152|usb_stor_BBB_transport(650)| COMMAND phase
153|usb_stor_BBB_transport(668)| DATA phase
154|usb_stor_BBB_transport(701)| STATUS phase
155|usb_request_sense(906)| Request Sense returned 05 26 00
156|usb_read_10(972)| read10: start 0x0 blocks 1
157|usb_stor_BBB_transport(650)| COMMAND phase
158|usb_stor_BBB_transport(701)| STATUS phase
159|usb_stor_BBB_transport(751)| FAILED
160|usb_stor_read(1065)| Read ERROR
161|usb_stor_BBB_transport(650)| COMMAND phase
162|usb_stor_BBB_transport(668)| DATA phase
163|usb_stor_BBB_transport(701)| STATUS phase
164|usb_request_sense(906)| Request Sense returned 05 26 00
165|usb_stor_read(1079)| usb_read: end startblk 0, blccnt 1 buffer 88540550
166|usb_stor_read(1032)|
167usb_read: device 1 with block size = 0x0
168|usb_stor_read(1032)|
169usb_read: device 2 with block size = 0x0
170|usb_stor_read(1032)|
171usb_read: device 3 with block size = 0x0
172
173-------------------------------
174FAT Info:
175 OEMName: 'MSWIN4.1'
176 filesystem: FAT32
177 sectorSize: 512
178 sectorCount: 621798
179 clusterSize: 4096
180 clusterCnt: 77644
181 BPB_NumFATs: 1
182 fatSize: 608
183 numRootDirE: 0
184 dirEPerSect: 16
185 sectorsRoot: 0
186 ReservedCnt: 32
187 fstDataSec: 640
188 sectPerClus: 8
189 rootSector: 62
190 diskSize: 310899K
191-------------------------------
192
193---------------------------------------------
194Loading Image: nk.bin (Format = CE-BIN)
195
196-------------------------------
197Image Info:
198 Address: 0x80100000
199 Length: 16189152 bytes
200-------------------------------
201........................................................
202Image Loaded Successfully.
203---------------------------------------------
204Program Entry Point: 80100004
205Executing Application
206
207
208Windows CE Kernel for MIPS Built on Mar 8 2013 at 17:06:06
209+OEMInit
210Address OEMTlbMissHandler 80104428
211LGE ULC2
212OEMInit() dwDefaultThreadQuantum (100)->(20)
213Cold Boot
214+OEMInterruptInit
215+OEMInterruptInit Disable All...
216+OEMInterruptInit Parsing Platform GPINT Configuration table...
217-OEMInterruptInit
218Using RTCTICK tick source
219Au13xx AB (PRId 800C8001) @ 792MHZ(732)
220-OEMInit
221[OAL] loader pool:16777216(18874368), file pool:8388608(10485760)
222pBootArgs->BootVer: 2172017, bRunExplorer 0 BootSequence 0
223Initializing PSC3 for SMBUS operation
224Initializing PSC1 for SPI operation
225SPI: Mapped HwIntr 160 to SysIntr 17
226Initializing PSC2 for I2S operation
227**** SetADCSampleRate : 48000 ****
228---- SetDACSampleRate : 48000 ----
229MEMPOOL: Built on Jun 8 2017.12:05:25
230MEMPOOL: Found MAE Memory Region(0). Phys:0x37800000 Virt:0xD0590000 Size:0x04000000
231MEMPOOL: Found ITE Memory Region(1). Phys:0x30800000 Virt:0xD45A0000 Size:0x02000000
232MEMPOOL: Found LCD Memory Region(2). Phys:0x30000000 Virt:0xD65A0000 Size:0x00800000
233MEMPOOL: Found EXT Memory Region(3). Phys:0x3B800000 Virt:0xD6DC0000 Size:0x04800000
234BSA: Driver, v1.2 Sep 26 2011.23:43:31
235ITE: Driver, v1.0 Sep 26 2011.23:43:31
236MPE: Driver, v1.2 Sep 26 2011.23:43:32
237Initializing PSC0 for I2S2 operation
238[DRVMGR] BT reset
239[DRVMGR] Driver Manager is initialized. (Jun 8 2017 at 12:05:36)
240SDIOInitializeSlot:: Slot:0x0
241
242 SDIOSetRate() SD Clock div 0 -> 457(200000 -> 199781)
243SDIOSDSlotOptionHandler - called - SetSlotInterface : Clock Setting: 200000
244SDIOSDSlotOptionHandler - called - SetSlotInterface : setting for 1 bit mode
245
246 SDIOSetRate() SD Clock same as div 457(457)200000 -> 199781
247SDBusDriver: Set POWER_ON_NOTIFICATION !!!!!!
248SDIOSDSlotOptionHandler - called - SetSlotInterface : Clock Setting: 25000000
249SDIOSDSlotOptionHandler - called - SetSlotInterface : setting for 8 bit mode [0x401]
250Slot[0], ManufactuerID: 0xfe
251
252 SDIOSetRate() SD Clock div 457 -> 3(25000000 -> 22875000)
253SDIOSDSlotOptionHandler - called - SetSlotInterface : Clock Setting: 25000000
254SDIOSDSlotOptionHandler - called - SetSlotInterface : setting for 8 bit mode [0x481]
255Slot[0], ManufactuerID: 0xfe
256
257 SDIOSetRate() SD Clock same as div 3(3)25000000 -> 22875000
258USBware::DllMain: Started hModule 0x8D05FBB0, dwReason 1
259USBware::DllMain: Attach called - Current Process: 0x00000042, ID: 0x00400002
260USBware::DllMain: Started hModule 0x8D05FBB0, dwReason 0
261USBware::DllMain: Detach called - Current Process: 0x00000042, ID: 0x00400002
262USBware::DllMain: Started hModule 0x8D0502F8, dwReason 1
263USBware::DllMain: Attach called - Current Process: 0x00000042, ID: 0x00400002
264USBware::UDD_Init: Starting pContext 0xD030EB88
265UDD_Init:RegQueryValueEx(EnableStack) failed
266bsp_pre_init: h/w init type 2012
267USBware::DllMain: Started hModule 0x8D049AF8, dwReason 1
268USBware::DllMain: Attach called - Current Process: 0x00000042, ID: 0x00400002
269USBware::UWD_Init: Starting pContext 0xD030EB88
270USBware version 3.5.14.84.4
271ehci_local0: EHCI version 1.0, with 2 ports
272ehci_local0: companion controllers, 1 port each
273ehci_local0: USB revision 2.0
274ehci_local0: new device, port=0 depth=0 speed=high
275ehci_local0: - Jungo Generic Root Hub, class 9/0, rev 0.20/af.00, addr 1
276uhub0: 2 ports with 2 removable, self powered
277ohci_local0: OHCI version 1.0, legacy support
278ohci_local0: USB revision 1.0
279ohci_local0: new device, port=0 depth=0 speed=full
280ohci_local0: - Jungo Generic Root Hub, class 9/0, rev 0.11/af.00, addr 1
281uhub1: 1 port with 1 removable, self powered
282<<<====>>> malloc g_pDummyData 4MB <<<====>>>
283USBware::UWM_Init: Starting pContext 0xD030EB88
284
285Mali200/GP2.
286 SVN Version: 265
287 Compiled: May 20 2014, time: 11:12:43.
288 Hardware Variant: mali200-maligp2-udd-windowsce-gles11-gles20-mmu-r0p4-noeglwait-drawmerge
289 Software Version: r2p0_05rel0
290 MALI_MEMORY_IS_CACHED: 1
291 MEMCPY_FAST: 1
292 STUB_EGLWAIT: 1
293
294[SF][PHYMGR] PHYMGR Driver is initialized. (May 26 2017 at 10:23:41)
295Window(0) Desktop Config. Pipe:1 Priority:0
296Window(1) MAE Config. Pipe:0 Priority:3
297Window(2) OpenGL/3d Config. Pipe:0 Priority:1
298Window(3) DirectDraw Config. Pipe:0 Priority:2
299
300
301Using panel 11 Innonux 800x480 BPP:16
302
303fbsize: 2863104, 002bb000
304AllocPhysMem(): p=30000000 v=DC340000
305LayMgr.cpp: Layout Manager successfully initialized to 1
306-OEMInterruptConnectTimer() = 25(i::1)
307TOUCH:ThrdPrio = 137, ThrdHighPrio = 121
308Maximum Allowed Error 5:
309[CP OK] ulRetry 0, len 1024 (643 msec)
310Time for running CP read thread....(646)
311[LAUNCHER] ULC launcher started. (May 26 2017 at 10:23:43)
312[DRVMGR] enable USB phy
313[ULC_Launcher] USER_MSG wParam 0, lParam 1
314Start launcher
315[DRVMGR] set GPIO0 into HIGH
316[0] - PartitionName[Part01], VolumeName[Storage Card2], snNumSectors[212164], dwAttributes 0x0000, bPartType 0x0010
317bRet[1] [0]-[0]
318[0] - PartitionName[Part02], VolumeName[Storage Card3], snNumSectors[826708], dwAttributes 0x0000, bPartType 0x0010
319bRet[1] [0]-[0]
320~~~+_+_ [PostProcessUpgrade] [3], g_bUIInverse : 0
321[PostProcessUpgrade] g_dwUIType = 0x1(1)
322~~~+_+_+_+_+_+_ [PostProcessUpgrade] Language ID [33, 3], g_dwUIType : 1, g_bUIInverse : 0
323-Ugaeg:IEitiFl- Not found... [\Storage Card3\upgrade]
324***** [Upd Manager ] Thread_Monitor Ended ~~~ [60] ****
325***** [Upd Manager ] CommandThread Ended ~~~ ****
326[HW REVISION] VAL(1)
327[EC INFO] SSE version string: SSE (Integer) 3.15.0.20004
328[DRVMGR] EXTMEM TotalUseExtMe- : 2097152, (0xD04E6740,2097152)
329
330====> [EC] [INFO] g_pSSEMemTab : 0x000B45A0[2097152][24] <====
331WndProc : Start MicomManager
332
333[INFO] SDVC(4)
334read dwDay : 0 dwTime : 59315
335[!!OKOK!!] LaGoaDtFl : [0] Checksum value [0xF7, 0x45369412], Bias -60
336Restore DTC table to MICOM
337[SKU REGION] (3 : MI_WEU)
338uhub0: new device, port=2 depth=1 speed=high
339uhub0: - Alcor Micro Mass Storage Device, class 0/0, rev 2.00/0.01, addr 2
340os_register_usbmass_attach
341====> free g_pDummyData <====
342[GPS Port Close][ 0: 0: 0][ 0: 0: 0: 0]
343[SysClock] Hour : 0, Min : 0, Sec : 0[-60]
344[SysClock] Hour : 0, Min : 0, Sec : 0
345[McmMgr] ReadUserTimeSetting ->> Manual time set: 0
346
347================== [0] ==================
348[RTC Date] 0000:00:00
349[RTC Time] 00:00:00:000
350=========================================
351OnCmdAppBootStatNoti Normal mode [0][1][1]
352[PRODUCT PILOT TEST TOOL] VAL(0)
353[HW REVISION] VAL(1)
354ReadConfigParameterList() [0] len : 52 / 52
355
356pwr_state-1, tempo_on-0
357
358~~ OK Read boot logo type from Micom:[1]
359[SF][PHYMGR] Opened driver for Application
360[NORW] NOR flash driver
361** Storead CAR TYPE= 1, Changing CAR TYPE= 1
362Car Maker is same !!! [1]
363[SF][PHYMGR] PHM_Close
364[INFO] StaTp errCode 1
365[INFO] CNF_CMK [1][1]
366Specific HMI : ADAC[0], TEMP[1], AIR[1], ENG[1], DRIVE[1]
367~!@#$ User RVC Enable : 1, UI Coloring : 1, UI Inverse : 0, Lang : 3!!!!
368
369 ulMapIndex 1(14Q4) LGe_Renault_ULC2_15CY_Primo_FR_14Q4_HM_POI_KML_SPC_JV_TMC_iFRHM@14Q4RenaultULC.lyc
370[Tool : 0] map code = 0x5246(FR)[iFRHM@14Q4]
371
372[VIN INFORMATION][17] VF15RBF0000000007
373[ECU_CONF] GPS=0
374~~~!!!~~~~ OnSetGPSType() 0
375[30303030]
376~~~~~~~~~~~~
377
378[McmMgr] SetAutoTime()
379[McmMgr] userTimeInfo.userTimeSetFlag : 0, userTimeInfo.offset 0
380[McmMgr] ReadUserTimeSetting ->> Manual time set: 0
381
382-nIOStatus[41], m_bIllStatus : 0, m_bIgnitionDetect : 0
383
384CRadio::ModeChange
385CRadio::ChangeToFgMode : Current main mode = 0, m_nSubMode = 0
386CRadio::KillTimer(nID=3)
387CRadio::KillTimer : Already Killed or another timer running.
388CRadio::StartSubModeNone : main mode=1, main mode step=0, m_nSubMode=0)
389CRadio::StartSubModeTune : CurPI=F203, CurFreq=87600)
390
391
392[**UpdatePwrState** 1] m_bIsAccOff-0, m_bIsPowerOff-0, m_bIsLowVoltage-0, m_bIsLocked-0
393
394CMicom::ActivateADAS bRet(0), [0, 0], [0 | 0(1)], [0, 0]!!!!
395
396[INFO] CMicom::ChangeClockMode() [1 -> 0]
397
398 file name[\Storage Card4\NNG\license\device.nng][220]
399[RADIO RDS] case CMD_APP_BOOT_STAT_NOTI : g_radio_country = 0, g_stData.en_rds = 1, g_stData.en_af = 1
400[BLUE]set_version>> bluetooth sw version is 06.22.19478 BuildTime: 09:33:45 Jun 22 2017
401[BLUE]BtAppMain::BtMain>> CsrSchedInit[0], schedInstance is 0x002503C0
402[BLUE]BtAppMain::BtMain>> CsrSchedInit[1], schedInstance is 0x002503C0
403[BLUE]BtAppMain::BtMain>> CsrSchedInit[2], schedInstance is 0x002503C0
404CRadio::OnCommand : NOTI_APP_FREQCHG_TUNE_COMPLETE : 87600
405CRadio::StopSubModeTune : SUBMODE_TUNE 87600
406CRadio::StartSubModeNone : main mode=1, main mode step=1, m_nSubMode=8)
407CRadio::OnCommand : NOTI_APP_RESET_RDS_INFO
408UART DMA Thread[3] [0]
409CRadio::OnCommand :CurPreset[12] PSN( MUSIQUE).
410OEMInterruptDisable:: DDMA:mask30, inten:3fd
411All thread exit.
412UART DMA Thread[3] [0]
413[BLUE]BtCmAppHandler::BtCmReadLocalDeviceAddressCfmFunc>> Local DeviceAddr: 9444:44:5A6E7F
414[BLUE]set_HWversion>> HW version(0x12e7)
415[BLUE]BtCmAppHandler::BtCmReadLocalDeviceAddressCfmFunc>> Bluetooth is alive
416
417~~##** Bluetooth has been alive...lParam 0
418
419!!!! [INFO] CNaviManager::setOSOverlayEnable(same configuration = m_bOSOverlayEnable 0)
420[DRVMGR] EXTMEM TotalUseExtMem : 4194304, (0xDC21CBE0,2097152)
421[DRVMGR] EXTMEM TotalUseExtMem : 4849664, (0xDBE63700,655360)
422[DRVMGR] EXTMEM TotalUseExtMem : 4915200, (0xDBE63740,65536)
423[DRVMGR] EXTMEM TotalUseExtMem : 5963776, (0xDBE63780,1048576)
424[DRVMGR] EXTMEM TotalUseExtMem : 10158080, (0xDBE637C0,4194304)
425!!!! [error][CNaviManager::DoNavi_ChangeMapColor] Navigation Not ready
426[MgrSys][LV:4][12:00:11:44,01104]CMgrSys::sWinMsgProc MgrSys Create
427[MgrSys][LV:4][12:00:11:49,01104]CMgrSys::createDialog CMgrSys : CreateWindow Sucessed
428[Info] CMicom::OnLCD()... m_bIllStatus : 0, m_MapMode : 2, Index : 2, LCDValue [ 0 -> 100 ]
429[DRVMGR] EXTMEM TotalUseExtMem : 16449536, (0xDBE63800,6291456)
430[DRVMGR] EXTMEM TotalUseExtMem : 17760256, (0xDBE67320,1310720)
431[MgrIpod][LV:4][12:00:12:815,01281]*** [MgriPod][InitIpodManager] Memory Alloc Successed [6MB] ****
432MGRMCM_AUDIOSRC_RADIO, Vol(0)
433CRadio::ModeChange
434CRadio::ChangeToFgMode : Current main mode = 1, m_nSubMode = 0