· 6 years ago · Jan 11, 2020, 09:34 PM
1[ 0.000000@0] Booting Linux on physical CPU 0x0
2[ 0.000000@0] Linux version 4.9.190 (sx05re@sx05re-MS-7A15) (gcc version 8.3. 0 (GNU Toolchain for the A-profile Architecture 8.3-2019.03 (arm-rel-8.36)) ) #1 SMP PREEMPT Fri Dec 20 23:17:51 CST 2019
3[ 0.000000@0] Boot CPU: AArch64 Processor [410fd034]
4[ 0.000000@0] Machine model: Amlogic S905X2
5[ 0.000000@0] efi: Getting EFI parameters from FDT:
6[ 0.000000@0] efi: UEFI not found.
7[ 0.000000@0] OF: reserved mem: __reserved_mem_alloc_size, start:0x0000000077 800000, end:0x0000000078000000, len:8 MiB
8[ 0.000000@0] Reserved memory: created CMA memory pool at 0x0000000077800000, size 8 MiB
9[ 0.000000@0] OF: reserved mem: initialized node linux,meson-fb, compatible i d shared-dma-pool
10[ 0.000000@0] Reserved memory: created CMA memory pool at 0x00000000e8800000, size 128 MiB
11[ 0.000000@0] OF: reserved mem: initialized node linux,ion-dev, compatible id shared-dma-pool
12[ 0.000000@0] Reserved memory: created CMA memory pool at 0x00000000e6000000, size 40 MiB
13[ 0.000000@0] OF: reserved mem: initialized node linux,di_cma, compatible id shared-dma-pool
14[ 0.000000@0] Reserved memory: created DMA memory pool at 0x00000000f0900000, size 0 MiB
15[ 0.000000@0] OF: reserved mem: initialized node linux,ppmgr, compatible id s hared-dma-pool
16[ 0.000000@0] Reserved memory: created CMA memory pool at 0x00000000c0400000, size 308 MiB
17[ 0.000000@0] OF: reserved mem: initialized node linux,codec_mm_cma, compatib le id shared-dma-pool
18[ 0.000000@0] OF: reserved mem: initialized node linux,codec_mm_reserved, com patible id amlogic, codec-mm-reserved
19[ 0.000000@0] OF: reserved mem: __reserved_mem_alloc_size, start:0x0000000005 000000, end:0x0000000005400000, len:4 MiB
20[ 0.000000@0] Reserved memory: created CMA memory pool at 0x0000000005000000, size 4 MiB
21[ 0.000000@0] OF: reserved mem: initialized node linux,secmon, compatible id shared-dma-pool
22[ 0.000000@0] cma: Reserved 8 MiB at 0x00000000e5800000
23[ 0.000000@0] On node 0 totalpages: 985088
24[ 0.000000@0] DMA zone: 15392 pages used for memmap
25[ 0.000000@0] DMA zone: 0 pages reserved
26[ 0.000000@0] DMA zone: 985088 pages, LIFO batch:31
27[ 0.000000@0] psci: probing for conduit method from DT.
28[ 0.000000@0] psci: PSCIv1.0 detected in firmware.
29[ 0.000000@0] psci: Using standard PSCI v0.2 function IDs
30[ 0.000000@0] psci: MIGRATE_INFO_TYPE not supported.
31[ 0.000000@0] psci: SMC Calling Convention v1.1
32[ 0.000000@0] percpu: Embedded 22 pages/cpu s51992 r8192 d29928 u90112
33[ 0.000000@0] pcpu-alloc: s51992 r8192 d29928 u90112 alloc=22*4096
34[ 0.000000@0] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3
35[ 0.000000@0] Detected VIPT I-cache on CPU0
36[ 0.000000@0] CPU features: enabling workaround for ARM erratum 845719
37[ 0.000000@0] Built 1 zonelists in Zone order, mobility grouping on. Total p ages: 969696
38[ 0.000000@0] Kernel command line: init=/init console=ttyS0,115200 no_console _suspend earlyprintk=aml-uart,0xff803000 ramoops.pstore_en=1 ramoops.record_size =0x8000 ramoops.console_size=0x4000 rootfstype=ramfs reboot_mode_android=normal logo=osd0,loaded,0x3d800000 vout=576cvbs,enable panel_type=lcd_1 hdmitx=,444,8bi t hdmimode=1080p60hz frac_rate_policy=1 hdmi_read_edid=1 cvbsmode=576cvbs osd_re verse=0 video_reverse=0 irq_check_en=0 androidboot.selinux=permissive androidboo t.firstboot=0 jtag=disable androidboot.hardware=amlogic androidboot.serialno=123 4567890 mac=68:1d:ef:16:21:3b androidboot.mac=68:1d:ef:16:21:3b BOOT_IMAGE=kerne l.img boot=LABEL=EMUELEC disk=LABEL=STORAGE console=ttyS0,115200 console=tty0 no _console_suspend enable_wol=1 hdmimode=1080p60hz logo=osd0,loaded,0x3d8 00000 quiet console=tty0 systemd.show_status=auto
39[ 0.000000@0] fb: osd0
40[ 0.000000@0] fb: loaded
41[ 0.000000@0] fb: 0x3d800000
42[ 0.000000@0] lcd: panel_type: lcd_1
43[ 0.000000@0] vout: get hdmimode: 1080p60hz
44[ 0.000000@0] hdmitx: hdmitx boot frac_rate_policy: 1
45[ 0.000000@0] vout: get cvbsmode: 576cvbs
46[ 0.000000@0] vpp_axis_reverse: bootargs is 0
47[ 0.000000@0] DI: di_read_canvas_reverse: bootargs is 0.
48[ 0.000000@0] phlock_phase_config: bootargs is 0.
49[ 0.000000@0] vout: get hdmimode: 1080p60hz
50[ 0.000000@0] fb: osd0
51[ 0.000000@0] fb: loaded
52[ 0.000000@0] fb: 0x3d800000
53[ 0.000000@0] PID hash table entries: 4096 (order: 3, 32768 bytes)
54[ 0.000000@0] Dentry cache hash table entries: 524288 (order: 10, 4194304 byt es)
55[ 0.000000@0] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes )
56[ 0.000000@0] Memory: 3328584K/3940352K available (11516K kernel code, 1648K rwdata, 9188K rodata, 4800K init, 1696K bss, 103864K reserved, 507904K cma-reser ved)
57[ 0.000000@0] Virtual kernel memory layout:
58[ 0.000000@0] modules : 0xffffff8000000000 - 0xffffff8008000000 ( 128 MB)
59[ 0.000000@0] vmalloc : 0xffffff8008000000 - 0xffffffbebfff0000 ( 250 GB)
60[ 0.000000@0] .text : 0xffffff8009080000 - 0xffffff8009bc0000 ( 11520 KB)
61[ 0.000000@0] .rodata : 0xffffff8009bc0000 - 0xffffff800a4c0000 ( 9216 KB)
62[ 0.000000@0] .init : 0xffffff800a4c0000 - 0xffffff800a970000 ( 4800 KB)
63[ 0.000000@0] .data : 0xffffff800a970000 - 0xffffff800ab0c200 ( 1649 KB)
64[ 0.000000@0] .bss : 0xffffff800ab0c200 - 0xffffff800acb43bc ( 1697 KB)
65[ 0.000000@0] fixed : 0xffffffbefe7fd000 - 0xffffffbefec00000 ( 4108 KB)
66[ 0.000000@0] PCI I/O : 0xffffffbefee00000 - 0xffffffbeffe00000 ( 16 MB)
67[ 0.000000@0] vmemmap : 0xffffffbf00000000 - 0xffffffc000000000 ( 4 GB maximum)
68[ 0.000000@0] 0xffffffbf00004000 - 0xffffffbf03c24000 ( 60 MB actual)
69[ 0.000000@0] memory : 0xffffffc000100000 - 0xffffffc0f0900000 ( 3848 MB)
70[ 0.000000@0] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
71[ 0.000000@0] Preemptible hierarchical RCU implementation.
72[ 0.000000@0] Build-time adjustment of leaf fanout to 64.
73[ 0.000000@0] RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=4.
74[ 0.000000@0] RCU: Adjusting geometry for rcu_fanout_leaf=64, nr_cpu_ids=4
75[ 0.000000@0] NR_IRQS:64 nr_irqs:64 0
76[ 0.000000@0] irq_meson_gpio: 100 to 8 gpio interrupt mux initialized
77[ 0.000000@0] g12a_aoclkc_init: register ao clk ok!
78[ 0.000000@0] Meson chip version = RevB (28:B - 40:0)
79[ 0.000000@0] meson_g12a_sdemmc_init: register amlogic sdemmc clk
80[ 0.000000@0] meson_g12a_sdemmc_init: register amlogic sdemmc clk
81[ 0.000000@0] meson_g12a_gpu_init: register meson gpu clk
82[ 0.000000@0] meson_g12a_media_init: register meson media clk
83[ 0.000000@0] meson_g12a_misc_init: register amlogic g12a misc clks
84[ 0.000000@0] meson_g12a_misc_init: done.
85[ 0.000000@0] g12a_clkc_init initialization complete
86[ 0.000000@0] arm_arch_timer: Architected cp15 timer(s) running at 24.00MHz ( phys).
87[ 0.000000@0] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycle s: 0x588fe9dc0, max_idle_ns: 440795202592 ns
88[ 0.000003@0] sched_clock: 56 bits at 24MHz, resolution 41ns, wraps every 439 8046511097ns
89[ 0.000025@0] meson_bc_timer: mclk->mux_reg =ffffff800800c190,mclk->reg =ffff ff800800e194
90[ 0.000491@0] Console: colour dummy device 80x25
91[ 0.000504@0] console [tty0] enabled
92[ 0.000516@0] Calibrating delay loop (skipped), value calculated using timer frequency.. 48.00 BogoMIPS (lpj=96000)
93[ 0.000523@0] pid_max: default: 32768 minimum: 301
94[ 0.000606@0] Security Framework initialized
95[ 0.000611@0] SELinux: Initializing.
96[ 0.000648@0] SELinux: Starting in permissive mode
97[ 0.000677@0] Mount-cache hash table entries: 8192 (order: 4, 65536 bytes)
98[ 0.000682@0] Mountpoint-cache hash table entries: 8192 (order: 4, 65536 byte s)
99[ 0.001280@0] ftrace: allocating 38033 entries in 149 pages
100[ 0.061383@0] sched-energy: CPU device node has no sched-energy-costs
101[ 0.061392@0] CPU0: update cpu_capacity 1024
102[ 0.061403@0] ASID allocator initialised with 65536 entries
103[ 0.093220@0] EFI services will not be available.
104[ 0.141355@1] Detected VIPT I-cache on CPU1
105[ 0.141400@1] CPU1: update cpu_capacity 1024
106[ 0.141403@1] CPU1: Booted secondary processor [410fd034]
107[ 0.173403@2] Detected VIPT I-cache on CPU2
108[ 0.173428@2] CPU2: update cpu_capacity 1024
109[ 0.173430@2] CPU2: Booted secondary processor [410fd034]
110[ 0.205477@3] Detected VIPT I-cache on CPU3
111[ 0.205500@3] CPU3: update cpu_capacity 1024
112[ 0.205502@3] CPU3: Booted secondary processor [410fd034]
113[ 0.205565@0] Brought up 4 CPUs
114[ 0.205568@0] SMP: Total of 4 processors activated.
115[ 0.205573@0] CPU features: detected feature: 32-bit EL0 Support
116[ 0.205643@0] CPU: All CPU(s) started at EL2
117[ 0.205661@0] alternatives: patching kernel code
118[ 0.206735@0] devtmpfs: initialized
119[ 0.223675@0] DMI not present or invalid.
120[ 0.223924@0] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
121[ 0.223935@0] futex hash table entries: 1024 (order: 4, 65536 bytes)
122[ 0.235268@0] pinctrl core: initialized pinctrl subsystem
123[ 0.236134@0] NET: Registered protocol family 16
124[ 0.238573@0] schedtune: init normalization constants...
125[ 0.238576@0] schedtune: no energy model data
126[ 0.238578@0] schedtune: disabled!
127[ 0.253604@0] cpuidle: using governor menu
128[ 0.253677@0] register canvas platform driver
129[ 0.253705@0] register rdma platform driver
130[ 0.253738@0] aml_vdac_init: module init
131[ 0.256161@0] vdso: 2 pages (1 code @ ffffff8009bc7000, 1 data @ ffffff800a97 5000)
132[ 0.256178@0] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers.
133[ 0.257110@0] DMA: preallocated 2048 KiB pool for atomic allocations
134[ 0.257259@0] clkmsr: clkmsr: driver init
135[ 0.257261@0] codec_mm_module_init
136[ 0.257304@0] media_configs_system_init
137[ 0.259004@0] aml_iomap: amlogic iomap probe done
138[ 0.259372@0] vpu: driver version: v20190329(7-g12a)
139[ 0.259378@0] vpu: load vpu_clk: 666666667Hz(7)
140[ 0.259564@0] vpu: clktree_init
141[ 0.259612@0] vpu: vpu_probe OK
142[ 0.262986@0] clkmsr: msr_clk_reg0=ffffff8008238004,msr_clk_reg2=ffffff800823 a00c
143[ 0.262993@0] clkmsr: msr_ring_reg0=ffffff800823c5fc
144[ 0.266164@0] aml_vdac_probe:probe start.cpu_id:6,name:meson-g12ab-vdac
145[ 0.266321@0] aml_vdac_probe: ok
146[ 0.266428@0] canvas_probe reg=00000000ff638000,size=2000
147[ 0.266445@0] canvas maped reg_base =ffffff8008268000
148[ 0.271877@0] rdma_probe,cpu_type:1, ver:0, len:8
149[ 0.272104@0] rdma_register, rdma_table_addr ffffff8008277000 rdma_table_addr _phy e5a00000 reg_buf ffffffc0e0d18000
150[ 0.272108@0] rdma_register success, handle 1 table_size 32768
151[ 0.272111@0] set_rdma_handle video rdma handle = 1.
152[ 0.272793@0] aml_snd_reg_map[0], reg:ff640000, size:2000
153[ 0.272802@0] aml_snd_reg_map[1], reg:ff642000, size:2000
154[ 0.272810@0] aml_snd_reg_map[2], reg:ff64a000, size:2000
155[ 0.272818@0] aml_snd_reg_map[3], reg:ff642800, size:1800
156[ 0.272828@0] aml_snd_reg_map[4], reg:ffd01000, size:1000
157[ 0.272830@0] amlogic auge_snd_iomap probe done
158[ 0.274084@0] cvbs_out: cvbsout_probe, cpu_id:4,name:meson-g12a-cvbsout
159[ 0.274095@0] cvbs_out: clk path:0
160[ 0.274097@0] cvbs_out: error: failed to get vdac_config
161[ 0.274254@0] vout: vout1: register server: cvbs_vout_server
162[ 0.274257@0] cvbs_out: register cvbs module server ok
163[ 0.274259@0] vout: vout2: register server: cvbs_vout2_server
164[ 0.274261@0] cvbs_out: register cvbs module vout2 server ok
165[ 0.274265@0] cvbs_out: chrdev devno 264241152 for disp
166[ 0.274438@0] cvbs_out: create cdev cvbs
167[ 0.274440@0] cvbs_out: cvbsout_probe OK
168[ 0.274884@0] codec_mm codec_mm: assigned reserved memory node linux,codec_mm _cma
169[ 0.274944@0] codec_mm codec_mm: assigned reserved memory node linux,codec_mm _cma
170[ 0.274946@0] codec_mm_probe ok
171[ 0.451612@1] SCSI subsystem initialized
172[ 0.451828@1] usbcore: registered new interface driver usbfs
173[ 0.451871@1] usbcore: registered new interface driver hub
174[ 0.451953@1] usbcore: registered new device driver usb
175[ 0.452075@1] pps_core: LinuxPPS API ver. 1 registered
176[ 0.452078@1] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Gio metti <giometti@linux.it>
177[ 0.452101@1] PTP clock support registered
178[ 0.452248@1] dmi: Firmware registration failed.
179[ 0.452526@1] secmon: reserve_mem_size:0x300000
180[ 0.452616@1] secmon secmon: assigned reserved memory node linux,secmon
181[ 0.452619@1] secmon: can't fine clear_range
182[ 0.452804@1] secmon: get page:ffffffbf00140000, 5000
183[ 0.452808@1] secmon: share in base: 0xffffffc0050fe000, share out base: 0xff ffffc0050ff000
184[ 0.452810@1] secmon: phy_in_base: 0x50fe000, phy_out_base: 0x50ff000
185[ 0.453544@1] hdmitx: system: amhdmitx_probe start
186[ 0.453546@1] hdmitx: system: Ver: 20181019
187[ 0.453575@1] hdmitx: system: hdmitx_device.chip_type : 10
188[ 0.453578@1] hdmitx: system: hdmitx_device.dongle_mode: 0
189[ 0.453606@1] hdmitx: system: not find product desc
190[ 0.453608@1] hdmitx: system: not find match pwr-ctl
191[ 0.453630@1] hdmitx: system: hdmitx_device.drm_feature : 0
192[ 0.453651@1] hdmitx: system: hpd irq = 30
193[ 0.453740@1] hdmitx: system: hdcp22_tx_skp failed to probe
194[ 0.453744@1] hdmitx: system: hdcp22_tx_esm failed to probe
195[ 0.454175@1] vout: vout1: register server: hdmitx_vout_server
196[ 0.454180@1] vout: vout2: register server: hdmitx_vout2_server
197[ 0.454626@1] hdmitx: hdmitx20: Mapped PHY: 0xffd00000
198[ 0.454637@1] hdmitx: hdmitx20: Mapped PHY: 0xff634400
199[ 0.454644@1] hdmitx: hdmitx20: Mapped PHY: 0xff900000
200[ 0.454660@1] hdmitx: hdmitx20: Mapped PHY: 0xff800000
201[ 0.454665@1] hdmitx: hdmitx20: Mapped PHY: 0xff63c000
202[ 0.454668@1] hdmitx: hdmitx20: Mapped PHY: 0xffd00000
203[ 0.454671@1] hdmitx: hdmitx20: Mapped PHY: 0xff608000
204[ 0.454675@1] hdmitx: hdmitx20: Mapped PHY: 0xff600000
205[ 0.454678@1] hdmitx: hdmitx20: Mapped PHY: 0xffe01000
206[ 0.454686@1] hdmitx: hw: hdmitx_get_format:0x0
207[ 0.454688@1] hdmitx: hw: P_HHI_HDMI_CLK_CNTL :0x100
208[ 0.454690@1] hdmitx: hw: P_HHI_HDMI_PLL_CNTL :0xda0504f7
209[ 0.454917@1] hdmitx: hw: avmute set to 1
210[ 0.454984@3] hdmitx: system: amhdmitx_probe end
211[ 0.455716@3] vout: create vout attribute OK
212[ 0.455876@3] vout: vout_fops_create OK
213[ 0.455879@3] vout: vout1: register server: nulldisp_vout_server
214[ 0.455904@3] hdmitx: hdmitx_set_current_vmode[3680]
215[ 0.455907@3] hdmitx: system: recalc before 1080p60hz 60 1
216[ 0.455911@3] hdmitx: system: recalc after 1080p60hz 2997 50
217[ 0.455916@3] hdmitx: system: get current mode: 1080p60hz
218[ 0.455919@3] hdmitx: system: update rx hdr info 0
219[ 0.455922@3] hdmitx: system: update physcial size: 16 9
220[ 0.455956@3] hdmitx: video: already init VIC = 0 Now VIC = 16
221[ 0.455959@3] hdmitx: video: rx edid only support RGB format
222[ 0.455962@3] hdmitx: hw: div40: 0
223[ 0.462068@0] hdmitx: system: irq 4 0
224[ 0.482070@0] hdmitx: system: irq 2 0
225[ 0.488170@3] hdmitx: frac_rate = 1
226[ 0.488174@3] hdmitx: hdmitx: set clk: VIC = 16 cd = 4 cs = 0 frac_rate = 1
227[ 0.488179@3] hdmitx: config HPLL = 5940000 frac_rate = 1
228[ 0.488234@3] hdmitx: HPLLv1: 0xdb3a04f7
229[ 0.488236@3] hdmitx: config HPLL done
230[ 0.488243@3] hdmitx: set_hpll_od3_clk_div[610] div = 6
231[ 0.488249@3] hdmitx: j = 4 vid_clk_div = 1
232[ 0.488255@3] hdmitx: set enc for VIC: 16
233[ 0.491269@3] hdmitx: hw: config hdmitx IP vic = 16 cd:4 cs: 0
234[ 0.491272@0] hdmitx: system: irq 80000001 0
235[ 0.594475@0] hdmitx: [0x10000104]: 0x00000001
236[ 0.594480@0] hdmitx: [0x10000180]: 0x000000ff
237[ 0.594483@0] hdmitx: [0x10000181]: 0x000000ff
238[ 0.594485@0] hdmitx: [0x10000182]: 0x00000003
239[ 0.594488@0] hdmitx: [0x10000183]: 0x00000007
240[ 0.594490@0] hdmitx: [0x10000184]: 0x0000003f
241[ 0.594493@0] hdmitx: [0x10000185]: 0x00000002
242[ 0.594495@0] hdmitx: [0x10000187]: 0x000000ff
243[ 0.594498@0] hdmitx: [0x10000188]: 0x00000003
244[ 0.622244@3] hdmitx: video: Sink is HDMI device
245[ 0.622265@3] hdmitx: hw: set audio
246[ 0.622271@3] hdmitx: hw: hdmitx tx_aud_src = 0, audio_param->channel_num = 0 , hdev->aud_output_ch = 0
247[ 0.622283@3] hdmitx: fs = 0, cd = 8, tmds_clk = 148352
248[ 0.622286@3] hdmitx: hw: aud_n_para = 5824
249[ 0.622294@3] hdmitx: hw: set channel status
250[ 0.622325@3] vout: init mode 1080p60hz set ok
251[ 0.622421@3] vout: aml_tvout_mode_monitor
252[ 0.622434@3] vout: aml_vout_probe OK
253[ 0.622708@3] chip type:0x28
254[ 0.623099@3] MEMORY:[100000+f0800000]
255[ 0.623104@3] ramdump_probe, storage device:data
256[ 0.623106@3] NO valid ramdump args:0 0
257[ 0.623116@3] ramdump_probe, set sticky to 8f09
258[ 0.623280@3] Advanced Linux Sound Architecture Driver Initialized.
259[ 0.624153@3] NetLabel: Initializing
260[ 0.624157@3] NetLabel: domain hash size = 128
261[ 0.624158@3] NetLabel: protocols = UNLABELED CIPSOv4
262[ 0.624200@3] NetLabel: unlabeled traffic allowed by default
263[ 0.626822@3] clocksource: Switched to clocksource arch_sys_counter
264[ 0.698505@1] VFS: Disk quotas dquot_6.6.0
265[ 0.698590@1] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
266[ 0.710078@1] NET: Registered protocol family 2
267[ 0.710695@1] TCP established hash table entries: 32768 (order: 6, 262144 byt es)
268[ 0.710943@1] TCP bind hash table entries: 32768 (order: 7, 524288 bytes)
269[ 0.711524@1] TCP: Hash tables configured (established 32768 bind 32768)
270[ 0.711637@1] UDP hash table entries: 2048 (order: 4, 65536 bytes)
271[ 0.711708@1] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
272[ 0.712009@1] NET: Registered protocol family 1
273[ 0.713763@1] wifi: power_on_pin_OD = 0;
274[ 0.713775@1] aml_wifi wifi: [wifi_dev_probe] no power_on_pin2
275[ 0.713892@1] meson-pwm ffd19000.pwm: pwm pinmux : can't get pinctrl
276[ 0.713938@1] meson-pwm ffd19000.pwm: pwm pinmux : can't get pinctrl
277[ 0.713954@1] aml_wifi wifi: [pwm_double_channel_conf_dt] wifi pwm dt ok
278[ 0.713971@1] aml_wifi wifi: [pwm_double_channel_conf] wifi pwm conf ok
279[ 0.713975@1] aml_wifi wifi: [wifi_dev_probe] dhd_static_buf setup
280[ 0.713978@1] Wifi: bcmdhd_init_wlan_mem: bcmdhd_init_wlan_mem 1.579.77.41.9
281[ 0.714325@1] Wifi: bcmdhd_init_wlan_mem: bcmdhd_init_wlan_mem prealloc ok
282[ 0.714330@1] aml_wifi wifi: [wifi_dev_probe] interrupt_pin=483
283[ 0.714334@1] aml_wifi wifi: [wifi_dev_probe] irq_num=0, irq_trigger_type=1
284[ 0.714338@1] aml_wifi wifi: [wifi_dev_probe] power_on_pin=482
285[ 0.714342@1] aml_wifi wifi: [wifi_dev_probe] clock_32k_pin=0
286[ 0.714611@1] aml_wifi wifi: [wifi_setup_dt] wifi_setup_dt
287[ 0.714717@1] aml_wifi wifi: [wifi_setup_dt] irq num is:(52)
288[ 0.714722@1] aml_wifi wifi: [wifi_setup_dt] interrupt_pin(483)
289[ 0.714738@1] aml_wifi wifi: [wifi_setup_dt] power_on_pin(482)
290[ 0.714944@1] Unpacking initramfs...
291[ 0.731528@1] Freeing initrd memory: 4420K
292[ 0.734198@1] hw perfevents: clusterb_enabled = 0
293[ 0.734203@1] hw perfevents: cpumasks 0xf, 0x0
294[ 0.734227@1] hw perfevents: cluster A irq = 10
295[ 0.734317@1] hw perfevents: enabled with armv8_pmuv3 PMU driver, 7 counters available
296[ 0.738034@2] audit: initializing netlink subsys (disabled)
297[ 0.738201@2] audit: type=2000 audit(0.696:1): initialized
298[ 0.739181@2] workingset: timestamp_bits=46 max_order=20 bucket_order=0
299[ 0.749383@0] squashfs: version 4.0 (2009/01/31) Phillip Lougher
300[ 0.749624@0] Registering sdcardfs 0.1
301[ 0.751049@2] SELinux: Registering netfilter hooks
302[ 0.755653@0] NET: Registered protocol family 38
303[ 0.755669@0] Key type asymmetric registered
304[ 0.755674@0] Asymmetric key parser 'x509' registered
305[ 0.755971@0] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 243)
306[ 0.755979@0] io scheduler noop registered (default)
307[ 0.755982@0] io scheduler deadline registered
308[ 0.756161@0] io scheduler cfq registered
309[ 0.757451@0] meson-pwm ff802000.pwm: pwm pinmux : can't get pinctrl
310[ 0.758487@1] random: fast init done
311[ 0.758527@1] random: crng init done
312[ 0.758745@0] [drm] Initialized
313[ 0.758888@0] mali ffe40000.bifrost: Continuing without Mali regulator contro l
314[ 0.759043@0] mali ffe40000.bifrost: max pp is 2
315[ 0.759049@0] mali ffe40000.bifrost: set min pp to default 1
316[ 0.759052@0] mali ffe40000.bifrost: min pp is 1
317[ 0.759056@0] mali ffe40000.bifrost: min clk is 4
318[ 0.759080@0] mali ffe40000.bifrost: hiu io source 0xffffff80083b9000
319[ 0.759089@0] mali ffe40000.bifrost: hiu io source 0xffffff80083bb000
320[ 0.759094@0] mali ffe40000.bifrost: num of pp used most of time 1
321[ 0.759098@0] mali ffe40000.bifrost: clock dvfs cfg table size is 4
322[ 0.759191@0] mali ffe40000.bifrost: max clk set 2
323[ 0.759195@0] mali ffe40000.bifrost: max clk is 2
324[ 0.759199@0] mali ffe40000.bifrost: turbo clk set to 3
325[ 0.759202@0] mali ffe40000.bifrost: turbo clk is 3
326[ 0.759207@0] mali ffe40000.bifrost: default clk is 1
327[ 0.759215@0] mali ffe40000.bifrost: ====================0=================== =
328[ 0.759215@0] clk_freq= 285714285, clk_parent=fclk_div7, voltage=1150, keep_c ount=2, threshod=<100 200>, clk_sample=285
329[ 0.759222@0] mali ffe40000.bifrost: ====================1=================== =
330[ 0.759222@0] clk_freq= 666666666, clk_parent=fclk_div3, voltage=1150, keep_c ount=1, threshod=<85 200>, clk_sample=666
331[ 0.759229@0] mali ffe40000.bifrost: ====================2=================== =
332[ 0.759229@0] clk_freq= 846000000, clk_parent= gp0_pll, voltage=1150, keep_c ount=1, threshod=<179 255>, clk_sample=846
333[ 0.759235@0] mali ffe40000.bifrost: ====================3=================== =
334[ 0.759235@0] clk_freq= 846000000, clk_parent= gp0_pll, voltage=1150, keep_c ount=1, threshod=<179 255>, clk_sample=846
335[ 0.759238@0] mali ffe40000.bifrost: clock dvfs table size is 4
336[ 0.759366@0] mali_plat=ffffff800a9fbd90
337[ 0.759556@0] meson_gcooldev is null, no set min status
338[ 0.759560@0] gpu cooling register okay with err=0
339[ 0.759638@0] meson_gcooldev is null, no set min status
340[ 0.759641@0] gpu core cooling register okay with err=0
341[ 0.759677@0] shader_present=1, tiler_present=1, l2_present=1
342[ 0.759778@0] Mali_pwr_on:gpu_irq : 200
343[ 0.760061@0] mali ffe40000.bifrost: GPU identified as 0x3 arch 7.0.9 r0p0 st atus 0
344[ 0.761437@2] mali ffe40000.bifrost: Probed as mali0
345[ 0.761941@2] Unable to detect cache hierarchy for CPU 0
346[ 0.767681@2] loop: module loaded
347[ 0.768189@2] mtdoops: mtd device (mtddev=name/number) must be supplied
348[ 0.768842@2] libphy: Fixed MDIO Bus: probed
349[ 0.769803@2] REG0:Addr = ffffff80083d1540
350[ 0.769820@2] MAC wol not set
351[ 0.769825@2] wzh pll 9c0040a 927e0000 ac5f49e5
352[ 0.770079@2] wzh analog 20200000 c000 23
353[ 0.780595@2] meson6-dwmac ff3f0000.ethernet: no reset control found
354[ 0.780606@2] stmmac - user ID: 0x11, Synopsys ID: 0x37
355[ 0.780609@2] Ring mode enabled
356[ 0.780612@2] DMA HW capability register supported
357[ 0.780615@2] Normal descriptors
358[ 0.780617@2] RX Checksum Offload Engine supported
359[ 0.780618@2] COE Type 2
360[ 0.780620@2] TX Checksum insertion supported
361[ 0.780622@2] Wake-Up On Lan supported
362[ 0.780682@2] Enable RX Mitigation via HW Watchdog Timer
363[ 0.783827@1] libphy: stmmac: probed
364[ 0.783835@1] eth%d: PHY ID 01803301 at 8 IRQ POLL (stmmac-0:08) active
365[ 0.785579@1] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
366[ 0.785584@1] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
367[ 0.786119@1] usbcore: registered new interface driver cdc_acm
368[ 0.786124@1] cdc_acm: USB Abstract Control Model driver for USB modems and I SDN adapters
369[ 0.786217@1] usbcore: registered new interface driver usb-storage
370[ 0.786388@1] usbcore: registered new interface driver usbserial
371[ 0.786451@1] usbcore: registered new interface driver usbserial_generic
372[ 0.786516@1] usbserial: USB Serial support registered for generic
373[ 0.787247@0] mousedev: PS/2 mouse device common for all mice
374[ 0.787807@2] i2c /dev entries driver
375[ 0.790084@0] ledtrig-cpu: registered to indicate activity on CPUs
376[ 0.790454@0] hidraw: raw HID events driver (C) Jiri Kosina
377[ 0.790945@2] usbcore: registered new interface driver usbhid
378[ 0.790949@2] usbhid: USB HID core driver
379[ 0.791745@2] value of voltage_tolerance 0
380[ 0.792681@2] cpu cpu0: meson_cpufreq_init: CPU 0 initialized
381[ 0.793821@2] ff803000.serial: clock gate not found
382[ 0.793912@2] meson_uart ff803000.serial: ==uart0 reg addr = ffffff80083d5000
383[ 0.793975@2] ff803000.serial: ttyS0 at MMIO 0xff803000 (irq = 20, base_baud = 1500000) is a meson_uart
384[ 0.793998@2] meson_uart ff803000.serial: ttyS0 use xtal(24M) 24000000 change 0 to 115200
385[ 0.837529@2] console [ttyS0] enabled
386[ 0.838848@1] meson_uart ffd24000.serial: ==uart1 reg addr = ffffff80083d7000
387[ 0.838916@1] ffd24000.serial: ttyS1 at MMIO 0xffd24000 (irq = 29, base_baud = 1500000) is a meson_uart
388[ 0.840392@2] amlogic-new-usb2-v2 ffe09000.usb2phy: USB2 phy probe:phy_mem:0x ffe09000, iomap phy_base:0xffffff80083fa000
389[ 0.840728@2] amlogic-new-usb3-v2 ffe09080.usb3phy: USB3 phy probe:phy_mem:0x ffe09080, iomap phy_base:0xffffff80083fe080
390[ 0.842647@2] aml_dma ff63e000.aml_dma: Aml dma
391[ 0.844734@2] aml_aes_dma ff63e000.aml_dma:aml_aes: Aml AES_dma
392[ 0.845338@1] aml_tdes_dma ff63e000.aml_dma:aml_tdes: Aml TDES_dma
393[ 0.846112@2] aml_sha_dma ff63e000.aml_dma:aml_sha: Aml SHA1/SHA224/SHA256 dm a
394[ 0.846368@2] meson-remote: Driver init
395[ 0.846512@2] meson-remote: IR XMP protocol handler initialized
396[ 0.849015@1] ion_dev soc:ion_dev: assigned reserved memory node linux,ion-de v
397[ 0.849712@1] ge2d: ge2d_init_module
398[ 0.850002@1] ge2d: ge2d_dev major:238
399[ 0.850378@0] ge2d: clock source clk_ge2d_gate ffffffc0e0cb8d00
400[ 0.850418@0] ge2d: clock clk_ge2d source ffffffc0e0cb8f00
401[ 0.850439@0] ge2d: clock source clk_vapb_0 ffffffc0e0ca42c0
402[ 0.850445@0] ge2d: ge2d init clock is 500000000 HZ, VPU clock is 666666656 H Z
403[ 0.850600@0] ge2d: ge2d clock is 499 MHZ
404[ 0.850613@0] ge2d: find address resource
405[ 0.850638@0] ge2d: map io source 0x00000000ff940000,size=65536 to 0xffffff80 08520000
406[ 0.850642@0] ge2d: reserved mem init failed
407[ 0.850645@0] ge2d: ge2d: pdev=ffffffc0e0e05400, irq=33, clk=ffffffc0e0cb8d00
408[ 0.850710@0] ge2d: ge2d start monitor
409[ 0.850807@0] ge2d: ge2d workqueue monitor start
410[ 0.851565@2] amvideom vsync irq: 34
411[ 0.852859@2] amvideocap_probe,amvideocap
412[ 0.852932@2] use cma buf.
413[ 0.854296@0] fb: osd_init_module
414[ 0.854747@0] fb: viu vsync irq: 34
415[ 0.854760@0] fb: viu2 vsync irq: 42
416[ 0.854975@0] 0x000000d8:Y=d8,U=0,V=0
417[ 0.854980@0] 0x000000d9:Y=d9,U=0,V=0
418[ 0.854983@0] 0x000000da:Y=da,U=0,V=0
419[ 0.854985@0] 0x000000db:Y=db,U=0,V=0
420[ 0.855545@0] fb: osd_rdma_init: rdma_table p=0xe5a08000,op=0xe5a08000 , v=0x ffffff8008511000
421[ 0.855604@0] rdma_register, rdma_table_addr ffffff8008513000 rdma_table_addr _phy e5a09000 reg_buf ffffffc0e0d54000
422[ 0.855608@0] rdma_register success, handle 2 table_size 4096
423[ 0.855611@0] fb: osd_rdma_init:osd rdma handle = 2.
424[ 0.855631@0] fb: mem_size: 0x800000
425[ 0.855632@0] fb: mem_size: 0x4b80000
426[ 0.855634@0] fb: mem_size: 0x100000
427[ 0.855635@0] fb: mem_size: 0x100000
428[ 0.855636@0] fb: mem_size: 0x800000
429[ 0.855787@0] meson-fb meson-fb: assigned reserved memory node linux,meson-fb
430[ 0.855791@0] fb: reserved memory base:0x0000000077800000, size:800000
431[ 0.856034@0] fb: fb def : 1920 1080 1920 2160 32
432[ 0.856036@0] fb: init fbdev bpp is:32
433[ 0.868581@0] fb: osd[0] enable: 1 (swapper/0)
434[ 0.886352@1] fb: set osd0 reverse as NONE
435[ 0.902066@0] fb: osd probe OK
436[ 0.902438@0] hdmitx: hdcp: hdmitx_hdcp_init
437[ 0.903594@0] vout: vout2: create vout2 attribute OK
438[ 0.903898@1] vout: vout2: vout2_fops_create OK
439[ 0.903905@1] vout: vout2: register server: nulldisp_vout2_server
440[ 0.903924@1] vout: vout2: init mode null set ok
441[ 0.904333@1] vout: vout2: clktree_init
442[ 0.904463@1] vout: vout2: aml_vout2_probe OK
443[ 0.904650@1] DI: di_module_init ok.
444[ 0.904658@1] DI: di_module_init: major 511
445[ 0.905368@2] deinterlace deinterlace: assigned reserved memory node linux,di _cma
446[ 0.905381@2] DI: CMA size 0x2800000.
447[ 0.905410@2] pre_irq:48
448[ 0.905418@2] post_irq:49
449[ 0.905420@2] DI: di_probe allocate rdma channel 0.
450[ 0.905430@2] di_get_vpu_clkb: get clk vpu error.
451[ 0.905491@2] DI: vpu clkb <334000000, 667000000>
452[ 0.905554@2] DI:enable vpu clkb.
453[ 0.905569@2] 0x000000dc:Y=dc,U=0,V=0
454[ 0.905571@2] 0x000000dd:Y=dd,U=0,V=0
455[ 0.905572@2] 0x000000de:Y=de,U=0,V=0
456[ 0.905574@2] 0x000000df:Y=df,U=0,V=0
457[ 0.905576@2] 0x000000e0:Y=e0,U=0,V=0
458[ 0.905578@2] 0x000000e1:Y=e1,U=0,V=0
459[ 0.905580@2] 0x000000e2:Y=e2,U=0,V=0
460[ 0.905581@2] 0x000000e3:Y=e3,U=0,V=0
461[ 0.905583@2] 0x000000f0:Y=f0,U=0,V=0
462[ 0.905585@2] 0x000000f1:Y=f1,U=0,V=0
463[ 0.905589@2] 0x000000f2:Y=f2,U=0,V=0
464[ 0.905591@2] 0x000000f3:Y=f3,U=0,V=0
465[ 0.905593@2] 0x000000f4:Y=f4,U=0,V=0
466[ 0.905595@2] 0x000000f5:Y=f5,U=0,V=0
467[ 0.905596@2] 0x000000f6:Y=f6,U=0,V=0
468[ 0.905598@2] 0x000000f7:Y=f7,U=0,V=0
469[ 0.905601@2] 0x000000f8:Y=f8,U=0,V=0
470[ 0.905603@2] 0x000000f9:Y=f9,U=0,V=0
471[ 0.905605@2] 0x000000fa:Y=fa,U=0,V=0
472[ 0.905607@2] 0x000000fb:Y=fb,U=0,V=0
473[ 0.905609@2] 0x000000fc:Y=fc,U=0,V=0
474[ 0.905610@2] 0x000000fd:Y=fd,U=0,V=0
475[ 0.905613@2] 0x000000fe:Y=fe,U=0,V=0
476[ 0.905616@2] DI: support post write back 254.
477[ 0.905855@2] DI: di_probe:Di use HRTIMER
478[ 0.906079@1] di_probe:ok
479[ 0.906238@1] vdin_drv_init: major 510
480[ 0.906591@1] vdin_drv_init: vdin driver init done
481[ 0.906595@1] [viuin..]viuin_init_module viuin module init
482[ 0.907063@1] [viuin..]viuin_probe probe ok.
483[ 0.907544@1] [RX]-hdmirx: hdmirx_init.
484[ 0.907550@1] ESM HLD: Initializing...
485[ 0.907790@2] tvin_afe: tvafe_drv_init: major 508
486[ 0.908062@2] tvin_afe: tvafe_drv_init.
487[ 0.908231@2] tvafe_vbi: vbi: vbi_init.
488[ 0.908376@2] PPMGRDRV: warn: ppmgr module init func called
489[ 0.908511@2] PPMGRDRV: err: ppmgr_driver_probe called
490[ 0.909751@2] Reserved memory: failed to init DMA memory pool at 0x00000000f0 900000, size 0 MiB
491[ 0.918484@2] PPMGRDRV: info: ppmgr_dev major:506
492[ 0.919460@0] picdec_driver_probe called.
493[ 0.919862@2] picdec: probe of picdec failed with error -22
494[ 0.920143@1] videosync_create_instance dev_s ffffffc0aa59c800,dev_s->dev fff fffc0b3efa980
495[ 0.920146@1] videosync_create_instance reg videosync.0
496[ 0.920250@1] aml_vecm_init:module init
497[ 0.920284@2] videosync_thread started
498[ 0.920611@1]
499[ 0.920611@1] VECM probe start
500[ 0.920966@2] Can't find wb_sel.
501[ 0.920968@2] hdr:Can't find cfg_en_osd_100.
502[ 0.920973@2] amlogic, vecm
503[ 0.920976@2] vlock dt support: 1
504[ 0.920978@2] vlock dt new_fsm: 0
505[ 0.920979@2] vlock dt hwver: 0
506[ 0.920981@2] vlock dt phlock_en: 0
507[ 0.920984@2] Can't find vlock_en.
508[ 0.920986@2] Can't find vlock_mode.
509[ 0.920988@2] Can't find vlock_pll_m_limit.
510[ 0.920990@2] Can't find vlock_line_limit.
511[ 0.921005@2] param_config vlock_en:1
512[ 0.921035@2] vlock_status_init vlock_en:0
513[ 0.921036@2] aml_vecm_probe: ok
514[ 0.921774@2] meson-mmc: mmc driver version: 3.02, 2017-05-15: New Emmc Host Controller
515[ 0.923049@1] meson-mmc: >>>>>>>>hostbase ffffff8008531000, dmode
516[ 0.924885@1] meson-mmc: actual_clock :400000, HHI_nand: 0x80
517[ 0.924887@1] meson-mmc: [meson_mmc_clk_set_rate_v3] after clock: 0x1000033c
518[ 0.924928@1] meson-mmc: emmc: fixdiv calc done: adj = 2d2000
519[ 0.935230@0] 1A2B com register: 82820481
520[ 0.935238@0] 1A4B com register: 82820481
521[ 0.935240@0] 1A4C com register: 4c937f7f
522[ 0.935242@0] 1C32 com register: 00000464
523[ 0.935243@0] 1C34 com register: 00000004
524[ 0.935245@0] 1C3D com register: 00000461
525[ 0.935286@0] 1A2B com register: 82820481
526[ 0.935287@0] 1A4B com register: 82820481
527[ 0.935289@0] 1A4C com register: 4c937f7f
528[ 0.935291@0] 1C32 com register: 00000464
529[ 0.935292@0] 1C34 com register: 00000004
530[ 0.935294@0] 1C3D com register: 00000461
531[ 0.962874@1] meson-mmc: meson_mmc_probe() : success!
532[ 0.974678@2] meson-mmc: >>>>>>>>hostbase ffffff800853a000, dmode
533[ 0.975434@2] meson-mmc: gpio_cd = 1ca
534[ 0.994876@0] hdmitx: system: plugin
535[ 1.015163@2] meson-mmc: >>>>>>>>hostbase ffffff800853a000, dmode
536[ 1.017192@2] meson-mmc: actual_clock :400000, HHI_nand: 0x80
537[ 1.017196@2] meson-mmc: [meson_mmc_clk_set_rate_v3] after clock: 0x1000033c
538[ 1.054573@1] meson-aml-mmc ffe07000.emmc: divider requested rate 200000000 ! = actual rate 199999997: ret=0
539[ 1.054585@1] meson-mmc: actual_clock :199999997, HHI_nand: 0x80
540[ 1.054587@1] meson-mmc: [meson_mmc_clk_set_rate_v3] after clock: 0x10000345
541[ 1.054594@1] meson-mmc: Data 1 aligned delay is 0
542[ 1.054598@1] meson-mmc: emmc: clk 199999997 tuning start
543[ 1.054861@2] meson-mmc: meson_mmc_probe() : success!
544[ 1.055216@2] amlogic mtd driver init
545[ 1.056341@2] aml_vrtc rtc: rtc core: registered aml_vrtc as rtc0
546[ 1.056555@2] input: aml_vkeypad as /devices/platform/rtc/input/input0
547[ 1.057770@1] meson-mmc: emmc: rx_tuning_result[0] = 40
548[ 1.057922@2] cectx ff80023c.aocec: cec driver date:Ver 2019/3/25
549[ 1.057922@2]
550[ 1.059000@1] meson-mmc: emmc: rx_tuning_result[1] = 40
551[ 1.060283@1] meson-mmc: emmc: rx_tuning_result[2] = 40
552[ 1.060324@1] meson-mmc: Tuning transfer error: nmatch=0 tuning_err:0xffffffa c
553[ 1.060533@2] cectx ff80023c.aocec: compatible:amlogic, aocec-g12a
554[ 1.060537@2] cectx ff80023c.aocec: cecb_ver:0x1
555[ 1.060539@2] cectx ff80023c.aocec: line_reg:0x1
556[ 1.060542@2] cectx ff80023c.aocec: line_bit:0x3
557[ 1.060545@2] cectx ff80023c.aocec: ee_to_ao:0x1
558[ 1.060762@2] input: cec_input as /devices/virtual/input/input1
559[ 1.060966@2] cectx ff80023c.aocec: not find 'port_num'
560[ 1.060969@2] cectx ff80023c.aocec: using cec:0
561[ 1.061003@2] cectx ff80023c.aocec: no hdmirx regs
562[ 1.061005@2] cectx ff80023c.aocec: no hhi regs
563[ 1.061014@2] cectx ff80023c.aocec: not find 'output'
564[ 1.064186@2] cectx ff80023c.aocec: irq cnt:2
565[ 1.073504@1] cectx ff80023c.aocec: wakeup_reason:0x0
566[ 1.073635@2] cectx ff80023c.aocec: cev val1: 0x0;val2: 0x0
567[ 1.073638@2] cectx ff80023c.aocec: aml_cec_probe success end
568[ 1.074231@2] unifykey: storage in base: 0xffffffc005000000
569[ 1.074232@2] unifykey: storage out base: 0xffffffc005040000
570[ 1.074233@2] unifykey: storage block base: 0xffffffc005080000
571[ 1.074235@2] unifykey: probe done!
572[ 1.074668@2] unifykey: no efuse-version set, use default value: -1
573[ 1.074670@2] unifykey: key unify config unifykey-num is 16
574[ 1.074736@2] unifykey: key unify fact unifykey-num is 16
575[ 1.074752@2] unifykey: unifykey_devno: 1f500000
576[ 1.075452@2] unifykey: device unifykeys created ok
577[ 1.075513@2] unifykey: aml_unifykeys_init done!
578[ 1.075617@2] meson ts init
579[ 1.075764@2] tsensor id: 0
580[ 1.076053@2] tsensor trim info: 0xfa0080d4!
581[ 1.076056@2] tsensor hireboot: 0xc0ff2af0
582[ 1.076163@2] meson ts init
583[ 1.076187@2] tsensor id: 1
584[ 1.076313@2] tsensor trim info: 0xfa00811d!
585[ 1.076314@2] tsensor hireboot: 0xc0ff2b10
586[ 1.076538@2] audio_dsp: [dsp]register dsp to char divece(257)
587[ 1.077185@2] amaudio: amaudio: driver amaudio init!
588[ 1.078275@2] amaudio: amaudio_init - amaudio: driver amaudio succuess!
589[ 1.079667@2] sysled: module init
590[ 1.080007@2] meson_wdt ffd0f0d0.watchdog: start watchdog
591[ 1.080009@2] meson_wdt ffd0f0d0.watchdog: creat work queue for watch dog
592[ 1.080374@2] meson_wdt ffd0f0d0.watchdog: AML Watchdog Timer probed done
593[ 1.080778@2] amlogic rfkill init
594[ 1.080882@2] enter bt_probe of_node
595[ 1.080932@2] not get gpio_en
596[ 1.080944@2] power on valid level is high
597[ 1.080944@2] bt: power_on_pin_OD = 0;
598[ 1.080945@2] bt: power_off_flag = 1;
599[ 1.080947@2] dis power down = 0;
600[ 1.126340@0] hdmitx: edid: EDID Parser:
601[ 1.126356@0] hdmitx: edid: get dtd0 vic: 97
602[ 1.126365@0] hdmitx: edid: get dtd1 vic: 16
603[ 1.126406@0] hdmitx: edid: get dtd2 vic: 120
604[ 1.126410@0] hdmitx: edid: find IEEEOUT
605[ 1.126449@0] hdmitx: edid: check sum valid
606[ 1.126450@0] hdmitx: edid: check sum valid
607[ 1.126457@0] hdmitx: edid: update rx hdr info d at edid parsing
608[ 1.126461@0] hdmitx: edid: check sum valid
609[ 1.126462@0] hdmitx: edid: check sum valid
610[ 1.126469@0] hdmitx: edid: blk0 raw data
611[ 1.126493@0] hdmitx: edid:
612[ 1.126493@0] 00ffffffffffff001e6d010001010101011b010380a05a780aee91a3544c992 6
613[ 1.126493@0] 0f5054a108003140454061407140818001010101010108e80030f2705a80b05 8
614[ 1.126493@0] 8a0040846300001e023a801871382d40582c450040846300001e000000fd003 a
615[ 1.126493@0] 791e883c000a202020202020000000fc004c472054560a20202020202020016 3
616[ 1.126493@0]
617[ 1.126493@0]
618[ 1.126496@0] hdmitx: edid: blk1 raw data
619[ 1.126519@0] hdmitx: edid:
620[ 1.126519@0] 020351f15a6160101f66650413051403021220212215015d5e5f6263643f402 c
621[ 1.126519@0] 0957071507505507013d06c06e030c001000b83c2000800102030467d85dc40 1
622[ 1.126519@0] 788003e200cfe305c000e3060d01e20f33662150b051001b304070360040846 3
623[ 1.126519@0] 00001e000000000000000000000000000000000000000000000000000000007 a
624[ 1.126519@0]
625[ 1.126519@0]
626[ 1.126524@0] hdmitx: system: update physcial size: 1600 900
627[ 1.126540@0] hdmitx: hdmitx: display colourdepth was 8 in cur_param 0xffffff 800aa632c0 (VIC: 16)
628[ 1.126541@0] hdmitx: system: get current mode: 1080p60hz
629[ 1.126543@0] hdmitx: system: update rx hdr info d
630[ 1.126545@0] hdmitx: system: update physcial size: 1600 900
631[ 1.126572@0] hdmitx: hdmitx: display colourdepth is 10 in cur_param 0xffffff 800aa632c0 (VIC: 16)
632[ 1.126581@0] hdmitx: system: [set_disp_mode_auto] ALREADY init VIC = 16
633[ 1.126586@0] hdmitx: hw: set audio
634[ 1.126589@0] hdmitx: hw: hdmitx tx_aud_src = 0, audio_param->channel_num = 0 , hdev->aud_output_ch = 0
635[ 1.126608@0] hdmitx: fs = 0, cd = 8, tmds_clk = 148352
636[ 1.126612@0] hdmitx: hw: aud_n_para = 5824
637[ 1.126622@0] hdmitx: hw: set channel status
638[ 1.135574@0] 1A2B com register: 82820481
639[ 1.135579@0] 1A4B com register: 82820481
640[ 1.135580@0] 1A4C com register: 4c937f7f
641[ 1.135581@0] 1C32 com register: 00000464
642[ 1.135583@0] 1C34 com register: 00000004
643[ 1.135584@0] 1C3D com register: 00000461
644[ 1.135622@0] 1A2B com register: 82820481
645[ 1.135623@0] 1A4B com register: 82820481
646[ 1.135625@0] 1A4C com register: 4c937f7f
647[ 1.135626@0] 1C32 com register: 00000464
648[ 1.135627@0] 1C34 com register: 00000004
649[ 1.135628@0] 1C3D com register: 00000461
650[ 1.150445@1] meson-mmc: emmc: rx_tuning_result[4] = 40
651[ 1.150456@1] meson-mmc: emmc: best_win_start =4, best_win_size =4
652[ 1.150461@1] meson-mmc: emmc: sd_emmc_regs->gclock=0x10000345,sd_emmc_regs-> gadjust=0x12000
653[ 1.150607@1] emmc: new HS200 MMC card at address 0001
654[ 1.150612@1] emmc: clock 199999997, 8-bit-bus-width
655[ 1.150612@1]
656[ 1.155474@1] mmcblk0: emmc:0001 RX14MB 29.1 GiB
657[ 1.159794@1] mmcblk0boot0: emmc:0001 RX14MB partition 1 4.00 MiB
658[ 1.160020@1] mmcblk0boot1: emmc:0001 RX14MB partition 2 4.00 MiB
659[ 1.160241@1] mmcblk0rpmb: emmc:0001 RX14MB partition 3 4.00 MiB
660[ 1.161801@1] meson-mmc: Enter aml_emmc_partition_ops
661[ 1.162209@1] meson-mmc: [mmc_read_partition_tbl] mmc read partition OK!
662[ 1.162212@1] meson-mmc: add_emmc_partition
663[ 1.162457@1] meson-mmc: [mmcblk0p01] bootloader offset 0x00000000 0000, size 0x000000400000
664[ 1.162597@1] meson-mmc: [mmcblk0p02] reserved offset 0x00000240 0000, size 0x000004000000
665[ 1.162620@1] meson-mmc: [mmcblk0p03] cache offset 0x000006c0 0000, size 0x000046000000
666[ 1.162777@1] meson-mmc: [mmcblk0p04] env offset 0x00004d40 0000, size 0x000000800000
667[ 1.162794@1] meson-mmc: [mmcblk0p05] logo offset 0x00004e40 0000, size 0x000000800000
668[ 1.162806@1] meson-mmc: [mmcblk0p06] recovery offset 0x00004f40 0000, size 0x000001800000
669[ 1.162844@1] meson-mmc: [mmcblk0p07] misc offset 0x00005140 0000, size 0x000000800000
670[ 1.163015@1] meson-mmc: [mmcblk0p08] dtbo offset 0x00005240 0000, size 0x000000800000
671[ 1.163034@1] meson-mmc: [mmcblk0p09] cri_data offset 0x00005340 0000, size 0x000000800000
672[ 1.163046@1] meson-mmc: [mmcblk0p10] param offset 0x00005440 0000, size 0x000001000000
673[ 1.163057@1] meson-mmc: [mmcblk0p11] boot offset 0x000055c0 0000, size 0x000001000000
674[ 1.163068@1] meson-mmc: [mmcblk0p12] rsv offset 0x00005740 0000, size 0x000001000000
675[ 1.163079@1] meson-mmc: [mmcblk0p13] metadata offset 0x000058c0 0000, size 0x000001000000
676[ 1.163089@1] meson-mmc: [mmcblk0p14] vbmeta offset 0x00005a40 0000, size 0x000000200000
677[ 1.163100@1] meson-mmc: [mmcblk0p15] tee offset 0x00005ae0 0000, size 0x000002000000
678[ 1.163111@1] meson-mmc: [mmcblk0p16] vendor offset 0x00005d60 0000, size 0x000010000000
679[ 1.163122@1] meson-mmc: [mmcblk0p17] odm offset 0x00006de0 0000, size 0x000008000000
680[ 1.163263@1] meson-mmc: [mmcblk0p18] system offset 0x00007660 0000, size 0x000060000000
681[ 1.163280@1] meson-mmc: [mmcblk0p19] product offset 0x0000d6e0 0000, size 0x000008000000
682[ 1.163293@1] meson-mmc: [mmcblk0p20] data offset 0x0000df60 0000, size 0x000668600000
683[ 1.163322@1] card key: card_blk_probe.
684[ 1.163325@1] emmc_key_init:183 emmc key lba_start:0x12020,lba_end:0x12220
685[ 1.163328@1] emmc key: emmc_key_init:205 ok.
686[ 1.163330@1] meson-mmc: amlmmc_dtb_init: register dtb chardev
687[ 1.167515@1] meson-mmc: calc e732ca3f, store e732ca3f
688[ 1.171545@1] meson-mmc: calc e732ca3f, store e732ca3f
689[ 1.171550@1] meson-mmc: total valid 2
690[ 1.171987@1] meson-mmc: amlmmc_dtb_init: register dtb chardev OK
691[ 1.172038@1] meson-mmc: Exit aml_emmc_partition_ops OK.
692[ 1.218938@2] meson-mmc: card IN
693[ 1.239340@3] Now can use cma, free:2543, wm:2656
694[ 1.324016@2] meson-mmc: normal card in
695[ 1.351546@3] clear:e6c00000, free:e6c00000, tick:689736 us
696[ 1.446878@2] meson-mmc: actual_clock :400000, HHI_nand: 0x80
697[ 1.446881@2] meson-mmc: [meson_mmc_clk_set_rate_v3] after clock: 0x1000033c
698[ 1.511455@2] meson-mmc: actual_clock :50000000, HHI_nand: 0x80
699[ 1.511457@2] meson-mmc: [meson_mmc_clk_set_rate_v3] after clock: 0x10000254
700[ 1.511803@2] sd: new high speed SDHC card at address 0001
701[ 1.511806@2] sd: clock 50000000, 4-bit-bus-width
702[ 1.511806@2]
703[ 1.512171@2] mmcblk1: sd:0001 GB1QT 29.8 GiB
704[ 1.513321@2] mmcblk1: p1 p2
705[ 1.527198@1] meson-saradc ff809000.saradc: set delay per tick to <1ms> by de fault.
706[ 1.527202@1] meson-saradc ff809000.saradc: set ticks per period to <1> by de fault.
707[ 1.528065@1] dmc_monitor_probe
708[ 1.544472@1] defendkey ff630218.defendkey: Reserved memory is not enough!
709[ 1.545716@1] defendkey: probe of ff630218.defendkey failed with error -22
710[ 1.545999@1] register clk_set_setting cpu[40]
711[ 1.546309@1] Registered firmware driver success.
712[ 1.546932@1] Try to load video/h264_enc.bin ...
713[ 1.546979@1] load firmware size : 76288, Name : video/h264_enc.bin.
714[ 1.546985@1] the fw pack ver v0.0 is too lower.
715[ 1.546987@1] it may work abnormally so need to be update in time.
716[ 1.547501@1] Try to load video/video_ucode.bin ...
717[ 1.548368@1] load firmware size : 1671680, Name : video/video_ucode.bin.
718[ 1.558118@1] ammvdec_mpeg4_driver_init_module
719[ 1.558164@1] amvdec_vc1 module init
720[ 1.558207@1] amvdec_h264 module init
721[ 1.558311@1] ammvdec_h264 module init
722[ 1.558361@1] amvdec_h265 module init
723[ 1.558450@1] amvdec_vp9 module init
724[ 1.558664@1] amvdec_avs module init
725[ 1.558841@1] amvenc_avc_probe -- reserved memory config fail.
726[ 1.558843@1] amvenc_avc - cma memory pool size: 60 MB
727[ 1.558857@1] encode_wq_init.
728[ 1.558860@1] encode start monitor.
729[ 1.558999@1] encode workqueue monitor start.
730[ 1.559144@1] vpu_init
731[ 1.559257@1] vpu_probe
732[ 1.559260@1] HevcEnc reserved memory config fail.
733[ 1.559261@1] HevcEnc - cma memory pool size: 64 MB
734[ 1.559276@1] HevcEnc - wave420l_irq: 40
735[ 1.559308@1] vpu base address get from platform driver physical base addr=0x ff610000, virtual base=0xffffff80085ac000
736[ 1.559591@1] success to probe vpu device with video memory from cma
737[ 1.559738@1] Amlogic A/V streaming port init
738[ 1.561490@1] get gate demux control ok ffffffc0aa5a1200
739[ 1.561502@1] get gate parser_top control ok ffffffc0aa5a1140
740[ 1.561526@1] get gate vdec control ok ffffffc0aa5a11c0
741[ 1.561555@1] get gate clk_81 control ok ffffffc0aa5a10c0
742[ 1.561589@1] get gate clk_vdec_mux control ok ffffffc0aa5a1100
743[ 1.561628@1] get gate clk_hcodec_mux control ok ffffffc0aa5a1f40
744[ 1.561673@1] get gate clk_hevc_mux control ok ffffffc0b3eff000
745[ 1.561722@1] get gate clk_hevcb_mux control ok ffffffc0b3fde4c0
746[ 1.561741@1] get gate ahbarb0 control ok ffffffc0b3fde500
747[ 1.561747@1] get gate asyncfifo control failed (null)
748[ 1.562065@1] bl301_manager: driver init
749[ 1.562068@1] bl301_manager: IR remote wake-up code: 0xffffffff
750[ 1.562069@1] bl301_manager: IR remote wake-up code mask: 0xffffffff
751[ 1.562071@1] bl301_manager: IR remote wake-up code protocol: 0x0
752[ 1.562073@1] bl301_manager: enable 5V system power on suspend/power off stat e: 0
753[ 1.565933@1] usbcore: registered new interface driver snd-usb-audio
754[ 1.566906@1] aml_codec_T9015 ff632000.t9015: aml_T9015_audio_codec_probe
755[ 1.566985@1] T9015 acodec used by auge, tdmout:1
756[ 1.567816@1] Error: Driver 'spdif-dit' is already registered, aborting...
757[ 1.569324@1] asoc debug: aml_audio_controller_probe-116
758[ 1.570193@1] asoc-aml-card auge_sound: aml_card_probe, parse error -517
759[ 1.575750@1] aml_card_probe error ret:-517
760[ 1.580245@1] aml_tdm_platform_probe, tdm ID = 0, lane_cnt = 4
761[ 1.580256@1] TDM id 0 i2s2hdmi:0
762[ 1.580264@1] snd_tdm ff642000.audiobus:tdma: lane_mask_out = 0, lane_oe_mask _out = 0
763[ 1.580402@1] No channel mask node Channel_Mask
764[ 1.580605@1] aml_tdm_platform_probe, tdm ID = 1, lane_cnt = 4
765[ 1.580657@1] TDM id 1 samesource_sel:3
766[ 1.580659@1] TDM id 1 i2s2hdmi:0
767[ 1.580664@1] snd_tdm ff642000.audiobus:tdmb: lane_mask_out = 1, lane_oe_mask _out = 0
768[ 1.580851@1] No channel mask node Channel_Mask
769[ 1.580984@1] aml_tdm_platform_probe, tdm ID = 2, lane_cnt = 4
770[ 1.580993@1] TDM id 2 i2s2hdmi:0
771[ 1.580999@1] snd_tdm ff642000.audiobus:tdmc: lane_mask_out = f, lane_oe_mask _out = 0
772[ 1.581135@1] No channel mask node Channel_Mask
773[ 1.581571@1] aml_spdif_platform_probe, spdif ID = 0
774[ 1.581813@1] SPDIF id 0 asrc_id:0 auto_asrc:0
775[ 1.581880@1] spdifout_play_with_zerodata, spdif id:0 enable:0
776[ 1.581884@1] spdif_a fifo ctrl, frddr:0 type:3, 32 bits, chmask 0x3, swap 0x 10
777[ 1.581889@1] spdif_info: rate: 48000, channel status ch0_l:0x100, ch0_r:0x10 0, ch1_l:0x200, ch1_r:0x200
778[ 1.581893@1] hdmitx: audio: aout notify format CT_PCM
779[ 1.581895@1] hdmitx: hw: set audio
780[ 1.581898@1] hdmitx: hw: hdmitx tx_aud_src = 0, audio_param->channel_num = 1 , hdev->aud_output_ch = 0
781[ 1.581910@1] hdmitx: fs = 3, cd = 8, tmds_clk = 148352
782[ 1.581913@1] hdmitx: hw: aud_n_para = 5824
783[ 1.581919@1] hdmitx: hw: set channel status
784[ 1.581947@1] hdmitx: audio: Audio Type: PCM
785[ 1.581948@1] hdmitx: audio: set audio param
786[ 1.581951@1] spdif_a is set to enable
787[ 1.581962@1] aml_spdif_platform_probe, register soc platform
788[ 1.581988@1] aml_spdif_platform_probe, spdif ID = 1
789[ 1.582034@1] spdifout_play_with_zerodata, spdif id:1 enable:0
790[ 1.582037@1] spdif_b fifo ctrl, frddr:0 type:3, 32 bits, chmask 0x3, swap 0x 10
791[ 1.582040@1] spdif_info: rate: 48000, channel status ch0_l:0x100, ch0_r:0x10 0, ch1_l:0x200, ch1_r:0x200
792[ 1.582044@1] spdif_b is set to enable
793[ 1.582050@1] aml_spdif_platform_probe, register soc platform
794[ 1.582601@1] default set lane_mask_in as all lanes.
795[ 1.582603@1] aml_pdm_platform_probe pdm filter mode from dts:1
796[ 1.582611@1] aml_pdm_platform_probe, register soc platform
797[ 1.582895@1] audio_ddr_mngr: 0, irqs toddr 21, frddr 24
798[ 1.582897@1] audio_ddr_mngr: 1, irqs toddr 22, frddr 25
799[ 1.582899@1] audio_ddr_mngr: 2, irqs toddr 23, frddr 26
800[ 1.583112@1] audiolocker_platform_probe
801[ 1.583428@1] resample_platform_probe
802[ 1.583770@1] parse power det src:4, hi_th:0x70000, lo_th:0x16000
803[ 1.584180@1] Register vad
804[ 1.584366@1] Netfilter messages via NETLINK v0.30.
805[ 1.584453@1] Initializing XFRM netlink socket
806[ 1.584465@1] NET: Registered protocol family 17
807[ 1.584488@1] Key type dns_resolver registered
808[ 1.586037@1] Registered swp emulation handler
809[ 1.586046@1] Registered cp15_barrier emulation handler
810[ 1.586051@1] Registered setend emulation handler
811[ 1.586477@1] registered taskstats version 1
812[ 1.802942@1] aml_dai_spdif_probe
813[ 1.802952@1] aml_dai_spdif_probe
814[ 1.802970@1] asoc-aml-card auge_sound: control 2:0:0:I2SIn CLK:0 is already present
815[ 1.805077@1] snd_tdm ff642000.audiobus:tdmc: ASoC: Failed to add I2SIn CLK: -16
816[ 1.812456@1] aml_dai_tdm_probe, failed add snd spdif controls
817[ 1.818256@1] set normal 512 fs /4 fs
818[ 1.818280@1] set spdifout clk:6144000, mpll:24576000
819[ 1.818282@1] get spdifout clk:6143997, mpll:24575987
820[ 1.818291@1] aml_dai_set_spdif_fmt , fmt 0x4010
821[ 1.818368@1] aml_spdif_new spdif_b, clk continuous:1
822[ 1.818370@1] spdifout_play_with_zerodata_free, spdif id:1
823[ 1.818608@1] asoc-aml-card auge_sound: dummy <-> SPDIF-B mapping ok
824[ 1.818622@1] set mclk:12288000, mpll:24576000, get mclk:12287994, mpll:24575 987
825[ 1.818625@1] aml_dai_set_tdm_slot(), txmask(0x3), rxmask(0x3)
826[ 1.818626@1] lanes_out_cnt(1), lanes_in_cnt(1)
827[ 1.818628@1] lanes_oe_out_cnt(0), lanes_oe_in_cnt(0)
828[ 1.818629@1] lanes_lb_cnt(0)
829[ 1.818630@1] slots(2), slot_width(32)
830[ 1.818640@1] asoc aml_dai_set_tdm_fmt, 0x4011, ffffffc0e0507c18, id(1), clks el(1)
831[ 1.818645@1] master_mode(1), binv(1), finv(1) out_skew(2), in_skew(3)
832[ 1.818898@1] asoc-aml-card auge_sound: T9015-audio-hifi <-> TDM-B mapping ok
833[ 1.818900@1] set normal 512 fs /4 fs
834[ 1.818912@1] set spdifout clk:6144000, mpll:24576000
835[ 1.818914@1] get spdifout clk:6143997, mpll:24575987
836[ 1.818916@1] aml_dai_set_spdif_fmt , fmt 0x4010
837[ 1.818993@1] aml_spdif_new spdif_a, clk continuous:1
838[ 1.818995@1] spdifout_play_with_zerodata_free, spdif id:0
839[ 1.819203@1] asoc-aml-card auge_sound: dummy <-> SPDIF mapping ok
840[ 1.819217@1] set mclk:12288000, mpll:24576000, get mclk:12287994, mpll:24575 987
841[ 1.819219@1] aml_dai_set_tdm_slot(), txmask(0x3), rxmask(0x3)
842[ 1.819221@1] lanes_out_cnt(4), lanes_in_cnt(1)
843[ 1.819222@1] lanes_oe_out_cnt(0), lanes_oe_in_cnt(0)
844[ 1.819224@1] lanes_lb_cnt(0)
845[ 1.819225@1] slots(2), slot_width(32)
846[ 1.819230@1] asoc aml_dai_set_tdm_fmt, 0x4011, ffffffc0e0507d18, id(2), clks el(2)
847[ 1.819233@1] master_mode(1), binv(1), finv(1) out_skew(2), in_skew(3)
848[ 1.819468@1] asoc-aml-card auge_sound: dummy <-> TDM-C mapping ok
849[ 1.820890@1] snd_card_add_kcontrols card:ffffffc0aa66d018
850[ 1.820908@1] effect_v2 is not init
851[ 1.820909@1] Not init vad
852[ 1.820911@1] Failed to add VAD controls
853[ 1.820941@1] eq/drc v1 function enable
854[ 1.846898@1] add line-out mute controls
855[ 1.847432@1] dwc3 ff500000.dwc3: Configuration mismatch. dr_mode forced to h ost
856[ 1.850131@1] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller
857[ 1.850143@1] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 1
858[ 1.850153@1] usb: xhci: determined sg_tablesize: 4294967295
859[ 1.850394@1] xhci-hcd xhci-hcd.0.auto: hcc params 0x0228fe6c hci version 0x1 10 quirks 0x20010010
860[ 1.850433@1] xhci-hcd xhci-hcd.0.auto: irq 14, io mem 0xff500000
861[ 1.850541@1] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
862[ 1.850545@1] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumbe r=1
863[ 1.850547@1] usb usb1: Product: xHCI Host Controller
864[ 1.850550@1] usb usb1: Manufacturer: Linux 4.9.190 xhci-hcd
865[ 1.850552@1] usb usb1: SerialNumber: xhci-hcd.0.auto
866[ 1.850965@1] hub 1-0:1.0: USB hub found
867[ 1.850984@1] hub 1-0:1.0: 2 ports detected
868[ 1.851172@1] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller
869[ 1.851182@1] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 2
870[ 1.851190@1] usb: xhci: determined sg_tablesize: 4294967295
871[ 1.851225@1] usb usb2: We don't know the algorithms for LPM for this host, d isabling LPM.
872[ 1.851288@1] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003
873[ 1.851291@1] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumbe r=1
874[ 1.851294@1] usb usb2: Product: xHCI Host Controller
875[ 1.851296@1] usb usb2: Manufacturer: Linux 4.9.190 xhci-hcd
876[ 1.851299@1] usb usb2: SerialNumber: xhci-hcd.0.auto
877[ 1.851615@1] hub 2-0:1.0: USB hub found
878[ 1.851630@1] hub 2-0:1.0: 1 port detected
879[ 1.852070@1] aml_vrtc rtc: setting system clock to 2015-01-01 00:00:07 UTC ( 1420070407)
880[ 1.852312@1] dwc_otg ff400000.dwc2_a: dwc_otg_driver_probe(ffffffc0e0dcc000)
881[ 1.852337@1] dwc_otg: usb0: type: 2 speed: 0, config: 0, dma: 0, id: 0, phy: ffe09000, ctrl: 0
882[ 1.852341@1] dwc_otg_driver_probe host only, not probe usb_otg!!!
883[ 1.853224@1] meson_cdev probe
884[ 1.853233@1] thermal: read gpupp failed
885[ 1.853364@1] meson_cdev index: 0
886[ 1.853470@1] thermal: read gpupp failed
887[ 1.855496@1] meson_cdev index: 1
888[ 1.855501@1] cpucore_cooling_register, max_cpu_core_num:4
889[ 1.855590@1] meson_cdev index: 2
890[ 1.855593@1] thermal: read gpupp failed
891[ 1.859355@1] meson_cdev index: 3
892[ 1.859388@1] find tzd id: 0
893[ 1.859487@1] find tzd id: 0
894[ 1.859511@1] meson_cdev probe done
895[ 1.859649@1] gxbb_pm: enter meson_pm_probe!
896[ 1.859672@1] gxbb_pm: meson_pm_probe done
897[ 1.859923@1] ALSA device list:
898[ 1.859925@1] #0: AML-AUGESOUND
899[ 1.861282@1] Freeing unused kernel memory: 4800K
900[ 1.895775@2] fb: malloc_osd_memory, cma:ffffff800abc7670
901[ 1.895782@2] fb: malloc_osd_memory, 1283, base:0x0000000077800000, size:8388 608
902[ 1.895804@2] fb: use ion buffer for fb memory, fb_index=0
903[ 1.914447@2] meson-fb meson-fb: create ion_client ffffffc0aa5edcc0, handle=f fffffc0aa6fa2c0
904[ 1.914454@2] meson-fb meson-fb: ion memory(0): created fb at 0x00000000e8800 000, size 75 MiB
905[ 1.914456@2] fb: Frame buffer memory assigned at
906[ 1.914459@2] fb: 0, phy: 0x00000000e8800000, vir:0xffffff800acba000, size=7 7312K
907[ 1.914459@2]
908[ 1.914462@2] fb: logo_index=0,fb_index=0
909[ 1.914464@2] fb: ---------------clear fb0 memory ffffff800acba000
910[ 1.938225@2] fb: osd[0] canvas.idx =0x40
911[ 1.938227@2] fb: osd[0] canvas.addr=0xe8800000
912[ 1.938228@2] fb: osd[0] canvas.width=7680
913[ 1.938230@2] fb: osd[0] canvas.height=2160
914[ 1.938231@2] fb: osd[0] frame.width=1920
915[ 1.938233@2] fb: osd[0] frame.height=1080
916[ 1.938234@2] fb: osd[0] out_addr_id =0x1
917[ 1.953113@2] fb: osd_release now.index=0,open_count=1
918[ 1.954720@3] fb: malloc_osd_memory, cma:ffffff800abc7670
919[ 1.954726@3] fb: malloc_osd_memory, 1283, base:0x0000000077800000, size:8388 608
920[ 1.954728@3] fb: use ion buffer for fb memory, fb_index=1
921[ 1.955217@3] meson-fb meson-fb: create ion_client ffffffc0aa5edcc0, handle=f fffffc0e0e6da80
922[ 1.955221@3] meson-fb meson-fb: ion memory(1): created fb at 0x00000000ed400 000, size 1 MiB
923[ 1.955223@3] fb: Frame buffer memory assigned at
924[ 1.955226@3] fb: 1, phy: 0x00000000ed400000, vir:0xffffff8008ef5000, size=1 024K
925[ 1.955226@3]
926[ 1.955228@3] fb: logo_index=0,fb_index=1
927[ 1.955230@3] fb: ---------------clear fb1 memory ffffff8008ef5000
928[ 1.955545@3] fb: osd[1] canvas.idx =0x43
929[ 1.955546@3] fb: osd[1] canvas.addr=0xed400000
930[ 1.955548@3] fb: osd[1] canvas.width=128
931[ 1.955549@3] fb: osd[1] canvas.height=32
932[ 1.955551@3] fb: osd[1] frame.width=32
933[ 1.955552@3] fb: osd[1] frame.height=32
934[ 1.955554@3] fb: osd[1] out_addr_id =0x2
935[ 1.969748@3] fb: osd_release now.index=1,open_count=1
936[ 1.986448@3] vfm_map_store:rm default
937[ 1.986448@3]
938[ 1.986507@3] vfm_map_store:add default decoder ppmgr deinterlace amvideo
939[ 1.986507@3]
940[ 1.986566@3] fb: osd[0] enable: 1 (sh)
941[ 2.002957@3] fb: osd[1] enable: 0 (sh)
942[ 2.031393@3] font: no symbol version for module_layout
943[ 2.036295@3] Console: switching to colour frame buffer device 240x67
944[ 2.059696@3] Checking disk(s): LABEL=EMUELEC LABEL=STORAGE
945[ 2.490849@0] usb 1-1: new full-speed USB device number 2 using xhci-hcd
946[ 2.632748@0] usb 1-1: New USB device found, idVendor=045e, idProduct=028e
947[ 2.632755@0] usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber =3
948[ 2.632757@0] usb 1-1: Product: Inno GamePad..
949[ 2.632760@0] usb 1-1: Manufacturer: Inno GamePad..
950[ 2.632762@0] usb 1-1: SerialNumber: 0000001
951[ 2.683433@0] usb 1-1: Unsupported device
952[ 2.683593@0] usb 1-1: Unsupported device
953[ 2.683778@0] usb 1-1: Unsupported device
954[ 2.685337@0] usb 1-1: Unsupported device
955[ 2.804073@3] fsck: CP437: Invalid argument
956[ 2.804073@3] fsck: fsck.fat 3.0.28 (2015-05-16)
957[ 2.804073@3] fsck: /dev/mmcblk1p1: 24 files, 56256/65501 clusters
958[ 2.804073@3] fsck: STORAGE: recovering journal
959[ 2.804073@3] fsck: STORAGE: Superblock last mount time is in the future.
960[ 2.804073@3] fsck: (by less than a day, probably due to the hardware clock being incorrectly set)
961[ 2.804073@3] fsck: STORAGE: clean, 2246/7684096 files, 1034497/30732288 bloc ks
962[ 3.190488@2] EXT4-fs (mmcblk1p2): couldn't mount as ext3 due to feature inco mpatibilities
963[ 3.267636@2] EXT4-fs (mmcblk1p2): mounted filesystem with ordered data mode. Opts: (null)
964[ 3.688630@2] systemd[1]: System time before build time, advancing clock.
965[ 3.723827@2] cgroup: cgroup2: unknown option "nsdelegate"
966[ 3.729329@2] systemd[1]: systemd 242 running in system mode. (-PAM -AUDIT -S ELINUX -IMA -APPARMOR -SMACK +SYSVINIT -UTMP -LIBCRYPTSETUP -GCRYPT -GNUTLS -ACL -XZ -LZ4 -SECCOMP +BLKID -ELFUTILS +KMOD +IDN2 -IDN -PCRE2 default-hierarchy=hy brid)
967[ 3.729780@2] systemd[1]: Detected architecture arm64.
968[ 3.734005@2] systemd[1]: Set hostname to <EmuELEC>.
969[ 3.776372@3] systemd[1]: File /usr/lib/systemd/system/systemd-journald.servi ce:12 configures an IP firewall (IPAddressDeny=any), but the local system does n ot support BPF/cgroup based firewalling.
970[ 3.776381@3] systemd[1]: Proceeding WITHOUT firewalling in effect! (This war ning is only shown for the first loaded unit using IP firewalling.)
971[ 3.837545@3] systemd[1]: Binding to IPv6 address not available since kernel does not support IPv6.
972[ 3.837584@3] systemd[1]: Binding to IPv6 address not available since kernel does not support IPv6.
973[ 3.844619@3] systemd[1]: Started Dispatch Password Requests to Console Direc tory Watch.
974[ 3.846287@3] systemd[1]: Created slice system-udevil\x2dmount.slice.
975[ 3.848167@0] meson_uart ff803000.serial: ttyS0 use xtal(24M) 24000000 change 115200 to 115200
976[ 3.848256@3] systemd[1]: Started Early root shell on /dev/ttyS0 FOR DEBUGGIN G ONLY.
977[ 4.004018@2] kernel-overlays-setup: setup base modules
978[ 4.104498@2] kernel-overlays-setup: added modules from /usr/lib/kernel-overl ays/base/lib/modules/4.9.190
979[ 4.146191@3] kernel-overlays-setup: added firmware from /usr/lib/kernel-over lays/base/lib/firmware
980[ 4.146663@3] kernel-overlays-setup: adding overlays from /storage/.cache/ker nel-overlays
981[ 4.148080@3] kernel-overlays-setup: done
982[ 4.279702@2] media: Linux media interface: v0.10
983[ 4.321967@3] Linux video capture interface: v2.00
984[ 4.340533@1] amlvid:info: amlvideo_init called
985[ 4.340539@1] amlvid:info: amlvideo_create_instance called
986[ 4.340545@1] amlvid:info: v4l2_dev.name=:amlvideo-000
987[ 4.340716@2] amlvideo-000: V4L2 device registered as video10
988[ 4.345025@2] wifi_dummy: loading out-of-tree module taints kernel.
989[ 4.345307@2] Triggered SDIO WiFi power on and bus rescan.
990[ 4.345328@2] aml_wifi wifi: [extern_wifi_set_enable] WIFI Disable! 482
991[ 4.371078@3] systemd-journald[2409]: Received request to flush runtime journ al from PID 1
992[ 4.674880@2] aml_wifi wifi: [extern_wifi_set_enable] WIFI Enable! 482
993[ 4.686930@3] NET: Registered protocol family 10
994[ 4.996358@0] meson-mmc: sdio: resp_timeout,vstat:0x9dff0800,virqc:3fff
995[ 4.996364@0] meson-mmc: sdio: err: wait for desc write back, bus_fsm:0x7
996[ 4.996374@0] meson-mmc: meson_mmc_irq_thread_v3 600 sdio: cmd:52
997[ 4.997490@0] meson-mmc: sdio: resp_timeout,vstat:0x9dff0800,virqc:3fff
998[ 4.997491@0] meson-mmc: sdio: err: wait for desc write back, bus_fsm:0x7
999[ 4.997498@0] meson-mmc: meson_mmc_irq_thread_v3 600 sdio: cmd:52
1000[ 5.003317@0] meson-mmc: sdio: resp_timeout,vstat:0xa1ff2800,virqc:3fff
1001[ 5.003323@0] meson-mmc: sdio: err: wait for irq service, bus_fsm:0x8
1002[ 5.003337@0] meson-mmc: meson_mmc_irq_thread_v3 600 sdio: cmd:8
1003[ 5.007690@2] meson-mmc: actual_clock :0, HHI_nand: 0x80
1004[ 5.007696@2] meson-mmc: [meson_mmc_clk_set_rate_v3] after clock: 0x1000033c
1005[ 5.030887@2] meson-mmc: actual_clock :400000, HHI_nand: 0x80
1006[ 5.030894@2] meson-mmc: [meson_mmc_clk_set_rate_v3] after clock: 0x1000033c
1007[ 5.066669@2] meson-aml-mmc ffe05000.sd2: divider requested rate 200000000 != actual rate 199999997: ret=0
1008[ 5.066676@2] meson-mmc: actual_clock :199999997, HHI_nand: 0x80
1009[ 5.066678@2] meson-mmc: [meson_mmc_clk_set_rate_v3] after clock: 0x10000245
1010[ 5.066682@2] meson-mmc: Data 1 aligned delay is 0
1011[ 5.066685@2] meson-mmc: sdio: clk 199999997 tuning start
1012[ 5.067488@2] meson-mmc: sdio: rx_tuning_result[0] = 40
1013[ 5.068217@2] meson-mmc: sdio: rx_tuning_result[1] = 40
1014[ 5.068968@2] meson-mmc: sdio: rx_tuning_result[2] = 40
1015[ 5.069759@2] meson-mmc: sdio: rx_tuning_result[3] = 40
1016[ 5.069784@2] meson-mmc: Tuning transfer error: nmatch=0 tuning_err:0xffffffa c
1017[ 5.069787@2] meson-mmc: sdio: best_win_start =0, best_win_size =4
1018[ 5.069790@2] meson-mmc: sdio: sd_emmc_regs->gclock=0x10000245,sd_emmc_regs-> gadjust=0x22000
1019[ 5.093743@2] sdio: new ultra high speed SDR104 SDIO card at address 0001
1020[ 5.093751@0] sdio: clock 199999997, 4-bit-bus-width
1021[ 5.093751@0]
1022[ 5.094097@0] meson-mmc: [sdio_reinit] finish
1023[ 5.602626@3] fb: osd_release now.index=0,open_count=1
1024[ 5.602678@3] Console: switching to colour dummy device 80x25
1025[ 5.942596@3] input: Microsoft X-Box 360 pad as /devices/platform/ff500000.dw c3/xhci-hcd.0.auto/usb1/1-1/1-1:1.0/input/input2
1026[ 5.943176@3] usbcore: registered new interface driver xpad
1027[ 5.974620@1] Registered IR keymap rc-empty
1028[ 5.975365@1] input: meson-ir as /devices/platform/ff808040.meson-ir/rc/rc0/i nput3
1029[ 5.975835@0] rc rc0: meson-ir as /devices/platform/ff808040.meson-ir/rc/rc0
1030[ 6.006685@0] lirc_dev: IR Remote Control driver registered, major 494
1031[ 6.009762@2] meson-ir ff808040.meson-ir: AO_RTI_PIN_MUX : 0x100011
1032[ 6.009775@2] meson-ir ff808040.meson-ir: receiver initialized
1033[ 6.012120@0] rc rc0: lirc_dev: driver ir-lirc-codec (meson-ir) registered at minor = 0
1034[ 6.012137@0] IR LIRC bridge handler initialized
1035[ 6.099745@3] decoder registered as /dev/video26
1036[ 6.361211@3] [0] vcodec_dec decoder
1037[ 6.361360@3] [0] release decoder
1038[ 6.574987@0] env not set, efuse also invalid
1039[ 6.586256@3] meson6-dwmac ff3f0000.ethernet eth0: fail to init PTP.
1040[ 6.586646@3] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
1041[ 6.950962@0] amlogic-new-usb2-v2 ffe09000.usb2phy: ---Set port(1) tuning for host cf(xhci_hub_control)--
1042[ 7.010954@0] usb 1-2: new high-speed USB device number 3 using xhci-hcd
1043[ 7.168254@0] usb 1-2: New USB device found, idVendor=148f, idProduct=3070
1044[ 7.168262@0] usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber =3
1045[ 7.168265@0] usb 1-2: Product: 802.11 n WLAN
1046[ 7.168267@0] usb 1-2: Manufacturer: Ralink
1047[ 7.168270@0] usb 1-2: SerialNumber: 1.0
1048[ 7.172597@0] usb 1-2: Unsupported device
1049[ 7.342942@3] usb 1-2: reset high-speed USB device number 3 using xhci-hcd
1050[ 7.494244@0] ieee80211 phy0: rt2x00_set_rt: Info - RT chipset 3070, rev 0201 detected
1051[ 7.504294@0] ieee80211 phy0: rt2x00_set_rf: Info - RF chipset 0005 detected
1052[ 7.505334@0] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
1053[ 7.507246@2] ieee80211 phy0: rt2x00lib_request_firmware: Info - Loading firm ware file 'rt2870.bin'
1054[ 7.508280@0] usbcore: registered new interface driver rt2800usb
1055[ 7.530892@0] ieee80211 phy0: rt2x00lib_request_firmware: Info - Firmware det ected - version: 0.36
1056[ 7.810095@0] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
1057[ 8.410976@2] input: Steam Controller Keyboard as /devices/virtual/input/inpu t4
1058[ 8.540475@2] vout: vmode set to 1080p60hz
1059[ 8.540481@2] vout: don't set the same mode as current, exit
1060[ 9.026857@3] vout: aml_tvout_mode_work: monitor stop
1061[ 9.048904@3] aml_spdif_open
1062[ 9.049074@3] audio_ddr_mngr: toddrs[0] registered by device ff642000.audiobu s:spdif
1063[ 9.049468@3] aml_dai_set_spdif_fmt , fmt 0x4010
1064[ 9.049528@3] aml_spdif_fifo_ctrl, bit depth:16, frddr type:1, toddr:type:1
1065[ 9.051049@3] aml_spdif_close
1066[ 9.051106@3] audio_ddr_mngr: toddrs[0] released by device ff642000.audiobus: spdif
1067[ 9.051973@3] spdif_b keep clk continuous
1068[ 9.051977@3] aml_spdif_open
1069[ 9.052099@3] audio_ddr_mngr: frddrs[0] registered by device ff642000.audiobu s:spdif_b
1070[ 9.052292@3] set normal 512 fs /4 fs
1071[ 9.052313@3] set spdifout clk:5644800, mpll:22579200
1072[ 9.052315@3] get spdifout clk:5644797, mpll:22579186
1073[ 9.052318@3] aml_dai_set_spdif_fmt , fmt 0x4010
1074[ 9.052321@3] set normal 512 fs /4 fs
1075[ 9.052327@3] set spdifout clk:5644800, mpll:22579200
1076[ 9.052329@3] get spdifout clk:5644797, mpll:22579186
1077[ 9.052369@3] spdif_info: rate: 44100, channel status ch0_l:0x100, ch0_r:0x10 0, ch1_l:0x0, ch1_r:0x0
1078[ 9.052374@3] hdmitx: err chn setting, must be 2, 4, 6 or 8, Rst as def
1079[ 9.052377@3] hdmitx: hw: set audio
1080[ 9.052379@3] hdmitx: hw: hdmitx tx_aud_src = 0, audio_param->channel_num = 1 , hdev->aud_output_ch = 0
1081[ 9.052392@3] hdmitx: fs = 3, cd = 8, tmds_clk = 148352
1082[ 9.052394@3] hdmitx: hw: aud_n_para = 5824
1083[ 9.052401@3] hdmitx: hw: set channel status
1084[ 9.052429@3] hdmitx: audio: Audio Type: PCM
1085[ 9.052431@3] hdmitx: err chn msk, must larger than 0
1086[ 9.052434@3] hdmitx: hw: set audio
1087[ 9.052435@3] hdmitx: hw: hdmitx tx_aud_src = 0, audio_param->channel_num = 0 , hdev->aud_output_ch = 0
1088[ 9.052446@3] hdmitx: fs = 2, cd = 8, tmds_clk = 148352
1089[ 9.052447@3] hdmitx: hw: aud_n_para = 8918
1090[ 9.052454@3] hdmitx: hw: set channel status
1091[ 9.052481@3] hdmitx: audio: Audio Type: PCM
1092[ 9.052482@3] hdmitx: audio: set audio param
1093[ 9.052484@3] aml_spdif_fifo_ctrl, bit depth:16, frddr type:1, toddr:type:1
1094[ 9.084225@3] aml_spdif_open
1095[ 9.084377@3] audio_ddr_mngr: toddrs[0] registered by device ff642000.audiobu s:spdif
1096[ 9.084755@3] aml_dai_set_spdif_fmt , fmt 0x4010
1097[ 9.084810@3] aml_spdif_fifo_ctrl, bit depth:16, frddr type:1, toddr:type:1
1098[ 9.084948@3] spdif_b keep clk continuous
1099[ 9.084951@3] aml_spdif_close
1100[ 9.084992@3] audio_ddr_mngr: frddrs[0] released by device ff642000.audiobus: spdif_b
1101[ 9.085045@3] aml_spdif_close
1102[ 9.085066@3] audio_ddr_mngr: toddrs[0] released by device ff642000.audiobus: spdif
1103[ 9.086116@3] audio_ddr_mngr: frddrs[0] registered by device ff642000.audiobu s:tdmc
1104[ 9.087163@3] set mclk:11289600, mpll:22579200, get mclk:11289593, mpll:22579 186
1105[ 9.087171@3] asoc aml_dai_set_tdm_fmt, 0x4011, ffffffc0e0507d18, id(2), clks el(2)
1106[ 9.087172@3] aml_dai_set_tdm_fmt(), fmt not change
1107[ 9.087176@3] dump_pcm_setting(ffffffc0e0507d18)
1108[ 9.087177@3] pcm_mode(1)
1109[ 9.087179@3] sysclk(11289600)
1110[ 9.087180@3] sysclk_bclk_ratio(4)
1111[ 9.087181@3] bclk(2822400)
1112[ 9.087183@3] bclk_lrclk_ratio(64)
1113[ 9.087184@3] lrclk(44100)
1114[ 9.087185@3] tx_mask(0x3)
1115[ 9.087186@3] rx_mask(0x3)
1116[ 9.087187@3] slots(2)
1117[ 9.087188@3] slot_width(32)
1118[ 9.087190@3] lane_mask_in(0x2)
1119[ 9.087191@3] lane_mask_out(0xf)
1120[ 9.087192@3] lane_oe_mask_in(0x0)
1121[ 9.087193@3] lane_oe_mask_out(0x0)
1122[ 9.087195@3] lane_lb_mask_in(0x0)
1123[ 9.087196@3] aml_dai_set_tdm_sysclk(), mpll no change, keep clk
1124[ 9.087198@3] aml_dai_set_tdm_sysclk(), mclk no change, keep clk
1125[ 9.087200@3] set mclk:11289600, mpll:22579200, get mclk:11289593, mpll:22579 186
1126[ 9.087202@3] aml_dai_set_clkdiv, div 4, clksel(2)
1127[ 9.087209@3] aml_dai_set_bclk_ratio, select I2S mode
1128[ 9.087214@3] mclk is not configured
1129[ 9.089985@3] tdm playback mute: 0, lane_cnt = 4
1130[ 9.091896@3] aml_spdif_open
1131[ 9.092029@3] audio_ddr_mngr: toddrs[0] registered by device ff642000.audiobu s:spdif
1132[ 9.092384@3] aml_dai_set_spdif_fmt , fmt 0x4010
1133[ 9.092438@3] aml_spdif_fifo_ctrl, bit depth:16, frddr type:1, toddr:type:1
1134[ 9.092611@3] tdm playback mute: 1, lane_cnt = 4
1135[ 9.092653@3] audio_ddr_mngr: frddrs[0] released by device ff642000.audiobus: tdmc
1136[ 9.092718@3] aml_spdif_close
1137[ 9.092738@3] audio_ddr_mngr: toddrs[0] released by device ff642000.audiobus: spdif
1138[ 9.093382@3] spdif_a keep clk continuous
1139[ 9.093384@3] aml_spdif_open
1140[ 9.093480@3] audio_ddr_mngr: frddrs[0] registered by device ff642000.audiobu s:spdif
1141[ 9.093806@3] set normal 512 fs /4 fs
1142[ 9.093827@3] set spdifout clk:5644800, mpll:22579200
1143[ 9.093830@3] get spdifout clk:5644797, mpll:22579186
1144[ 9.093832@3] aml_dai_set_spdif_fmt , fmt 0x4010
1145[ 9.093835@3] set normal 512 fs /4 fs
1146[ 9.093841@3] set spdifout clk:5644800, mpll:22579200
1147[ 9.093843@3] get spdifout clk:5644797, mpll:22579186
1148[ 9.093883@3] spdif_info: rate: 44100, channel status ch0_l:0x100, ch0_r:0x10 0, ch1_l:0x0, ch1_r:0x0
1149[ 9.093889@3] aml_spdif_fifo_ctrl, bit depth:16, frddr type:1, toddr:type:1
1150[ 9.095975@3] aml_spdif_open
1151[ 9.096103@3] audio_ddr_mngr: toddrs[0] registered by device ff642000.audiobu s:spdif
1152[ 9.096516@3] aml_dai_set_spdif_fmt , fmt 0x4010
1153[ 9.096573@3] aml_spdif_fifo_ctrl, bit depth:16, frddr type:1, toddr:type:1
1154[ 9.096727@3] spdif_a keep clk continuous
1155[ 9.096732@3] aml_spdif_close
1156[ 9.096775@3] audio_ddr_mngr: frddrs[0] released by device ff642000.audiobus: spdif
1157[ 9.096826@3] aml_spdif_close
1158[ 9.096851@3] audio_ddr_mngr: toddrs[0] released by device ff642000.audiobus: spdif
1159[ 9.097723@3] spdif_b keep clk continuous
1160[ 9.097728@3] aml_spdif_open
1161[ 9.097845@3] audio_ddr_mngr: frddrs[0] registered by device ff642000.audiobu s:spdif_b
1162[ 9.098210@3] set normal 512 fs /4 fs
1163[ 9.098233@3] set spdifout clk:5644800, mpll:22579200
1164[ 9.098235@3] get spdifout clk:5644797, mpll:22579186
1165[ 9.098238@3] aml_dai_set_spdif_fmt , fmt 0x4010
1166[ 9.098241@3] set normal 512 fs /4 fs
1167[ 9.098247@3] set spdifout clk:5644800, mpll:22579200
1168[ 9.098249@3] get spdifout clk:5644797, mpll:22579186
1169[ 9.098295@3] spdif_info: rate: 44100, channel status ch0_l:0x100, ch0_r:0x10 0, ch1_l:0x0, ch1_r:0x0
1170[ 9.098300@3] hdmitx: err chn setting, must be 2, 4, 6 or 8, Rst as def
1171[ 9.098302@3] hdmitx: err chn msk, must larger than 0
1172[ 9.098305@3] hdmitx: hw: set audio
1173[ 9.098308@3] hdmitx: hw: hdmitx tx_aud_src = 0, audio_param->channel_num = 1 , hdev->aud_output_ch = 0
1174[ 9.098320@3] hdmitx: fs = 2, cd = 8, tmds_clk = 148352
1175[ 9.098322@3] hdmitx: hw: aud_n_para = 8918
1176[ 9.098329@3] hdmitx: hw: set channel status
1177[ 9.098357@3] hdmitx: audio: Audio Type: PCM
1178[ 9.098359@3] hdmitx: audio: set audio param
1179[ 9.098361@3] aml_spdif_fifo_ctrl, bit depth:16, frddr type:1, toddr:type:1
1180[ 9.100483@3] aml_spdif_open
1181[ 9.100641@3] audio_ddr_mngr: toddrs[0] registered by device ff642000.audiobu s:spdif
1182[ 9.101053@3] aml_dai_set_spdif_fmt , fmt 0x4010
1183[ 9.101110@3] aml_spdif_fifo_ctrl, bit depth:16, frddr type:1, toddr:type:1
1184[ 9.101294@2] spdif_b keep clk continuous
1185[ 9.101298@2] aml_spdif_close
1186[ 9.101341@2] audio_ddr_mngr: frddrs[0] released by device ff642000.audiobus: spdif_b
1187[ 9.101391@2] aml_spdif_close
1188[ 9.101413@2] audio_ddr_mngr: toddrs[0] released by device ff642000.audiobus: spdif
1189[ 9.102111@2] spdif_b keep clk continuous
1190[ 9.102113@2] aml_spdif_open
1191[ 9.102222@2] audio_ddr_mngr: frddrs[0] registered by device ff642000.audiobu s:spdif_b
1192[ 9.102557@2] set normal 512 fs /4 fs
1193[ 9.102579@2] set spdifout clk:5644800, mpll:22579200
1194[ 9.102582@2] get spdifout clk:5644797, mpll:22579186
1195[ 9.102585@2] aml_dai_set_spdif_fmt , fmt 0x4010
1196[ 9.102587@2] set normal 512 fs /4 fs
1197[ 9.102594@2] set spdifout clk:5644800, mpll:22579200
1198[ 9.102596@2] get spdifout clk:5644797, mpll:22579186
1199[ 9.102638@2] spdif_info: rate: 44100, channel status ch0_l:0x100, ch0_r:0x10 0, ch1_l:0x0, ch1_r:0x0
1200[ 9.102643@2] hdmitx: err chn setting, must be 2, 4, 6 or 8, Rst as def
1201[ 9.102645@2] hdmitx: err chn msk, must larger than 0
1202[ 9.102649@2] hdmitx: hw: set audio
1203[ 9.102651@2] hdmitx: hw: hdmitx tx_aud_src = 0, audio_param->channel_num = 5 , hdev->aud_output_ch = 0
1204[ 9.102664@2] hdmitx: fs = 2, cd = 8, tmds_clk = 148352
1205[ 9.102666@2] hdmitx: hw: aud_n_para = 8918
1206[ 9.102673@2] hdmitx: hw: set channel status
1207[ 9.102701@2] hdmitx: audio: Audio Type: PCM
1208[ 9.102703@2] hdmitx: audio: set audio param
1209[ 9.102705@2] aml_spdif_fifo_ctrl, bit depth:16, frddr type:1, toddr:type:1
1210[ 9.104673@2] aml_spdif_open
1211[ 9.104835@2] audio_ddr_mngr: toddrs[0] registered by device ff642000.audiobu s:spdif
1212[ 9.105255@2] aml_dai_set_spdif_fmt , fmt 0x4010
1213[ 9.105310@2] aml_spdif_fifo_ctrl, bit depth:16, frddr type:1, toddr:type:1
1214[ 9.105476@2] spdif_b keep clk continuous
1215[ 9.105481@2] aml_spdif_close
1216[ 9.105537@2] audio_ddr_mngr: frddrs[0] released by device ff642000.audiobus: spdif_b
1217[ 9.105593@2] aml_spdif_close
1218[ 9.105618@2] audio_ddr_mngr: toddrs[0] released by device ff642000.audiobus: spdif
1219[ 9.106374@2] spdif_b keep clk continuous
1220[ 9.106377@2] aml_spdif_open
1221[ 9.106497@2] audio_ddr_mngr: frddrs[0] registered by device ff642000.audiobu s:spdif_b
1222[ 9.106907@2] set normal 512 fs /4 fs
1223[ 9.106932@2] set spdifout clk:5644800, mpll:22579200
1224[ 9.106935@2] get spdifout clk:5644797, mpll:22579186
1225[ 9.106937@2] aml_dai_set_spdif_fmt , fmt 0x4010
1226[ 9.106941@2] set normal 512 fs /4 fs
1227[ 9.106947@2] set spdifout clk:5644800, mpll:22579200
1228[ 9.106949@2] get spdifout clk:5644797, mpll:22579186
1229[ 9.106996@2] spdif_info: rate: 44100, channel status ch0_l:0x100, ch0_r:0x10 0, ch1_l:0x0, ch1_r:0x0
1230[ 9.107002@2] hdmitx: err chn setting, must be 2, 4, 6 or 8, Rst as def
1231[ 9.107003@2] hdmitx: err chn msk, must larger than 0
1232[ 9.107007@2] hdmitx: hw: set audio
1233[ 9.107010@2] hdmitx: hw: hdmitx tx_aud_src = 1, audio_param->channel_num = 7 , hdev->aud_output_ch = 0
1234[ 9.107022@2] hdmitx: fs = 2, cd = 8, tmds_clk = 148352
1235[ 9.107026@2] hdmitx: hw: aud_n_para = 8918
1236[ 9.107033@2] hdmitx: hw: set channel status
1237[ 9.134847@2] hdmitx: audio: Audio Type: PCM
1238[ 9.134852@2] hdmitx: audio: set audio param
1239[ 9.134856@2] aml_spdif_fifo_ctrl, bit depth:16, frddr type:1, toddr:type:1
1240[ 9.136850@2] aml_spdif_open
1241[ 9.136989@2] audio_ddr_mngr: toddrs[0] registered by device ff642000.audiobu s:spdif
1242[ 9.137353@2] aml_dai_set_spdif_fmt , fmt 0x4010
1243[ 9.137406@2] aml_spdif_fifo_ctrl, bit depth:16, frddr type:1, toddr:type:1
1244[ 9.137531@2] spdif_b keep clk continuous
1245[ 9.137535@2] aml_spdif_close
1246[ 9.137577@2] audio_ddr_mngr: frddrs[0] released by device ff642000.audiobus: spdif_b
1247[ 9.137625@2] aml_spdif_close
1248[ 9.137646@2] audio_ddr_mngr: toddrs[0] released by device ff642000.audiobus: spdif
1249[ 9.148515@2] spdif_b keep clk continuous
1250[ 9.148522@2] aml_spdif_open
1251[ 9.148674@2] audio_ddr_mngr: frddrs[0] registered by device ff642000.audiobu s:spdif_b
1252[ 9.149032@2] set normal 512 fs /4 fs
1253[ 9.149055@2] set spdifout clk:5644800, mpll:22579200
1254[ 9.149057@2] get spdifout clk:5644797, mpll:22579186
1255[ 9.149060@2] aml_dai_set_spdif_fmt , fmt 0x4010
1256[ 9.149063@2] set normal 512 fs /4 fs
1257[ 9.149070@2] set spdifout clk:5644800, mpll:22579200
1258[ 9.149072@2] get spdifout clk:5644797, mpll:22579186
1259[ 9.149147@2] spdif_info: rate: 44100, channel status ch0_l:0x100, ch0_r:0x10 0, ch1_l:0x0, ch1_r:0x0
1260[ 9.149153@2] hdmitx: err chn setting, must be 2, 4, 6 or 8, Rst as def
1261[ 9.149155@2] hdmitx: err chn msk, must larger than 0
1262[ 9.149158@2] hdmitx: hw: set audio
1263[ 9.149161@2] hdmitx: hw: hdmitx tx_aud_src = 0, audio_param->channel_num = 1 , hdev->aud_output_ch = 0
1264[ 9.149173@2] hdmitx: fs = 2, cd = 8, tmds_clk = 148352
1265[ 9.149176@2] hdmitx: hw: aud_n_para = 8918
1266[ 9.149182@2] hdmitx: hw: set channel status
1267[ 9.149211@2] hdmitx: audio: Audio Type: PCM
1268[ 9.149212@2] hdmitx: audio: set audio param
1269[ 9.149215@2] aml_spdif_fifo_ctrl, bit depth:16, frddr type:1, toddr:type:1
1270[ 9.152241@2] asoc-aml-card auge_sound: S/PDIF Playback enable
1271[ 9.154389@2] aml_spdif_open
1272[ 9.154531@2] audio_ddr_mngr: toddrs[0] registered by device ff642000.audiobu s:spdif
1273[ 9.155112@2] aml_dai_set_spdif_fmt , fmt 0x4010
1274[ 9.155230@2] aml_spdif_fifo_ctrl, bit depth:16, frddr type:1, toddr:type:1
1275[ 9.159462@3] asoc-aml-card auge_sound: S/PDIF Capture enable
1276[ 10.525699@1] fb: osd_release now.index=0,open_count=1
1277[ 10.572995@0] fb: malloc_osd_memory, cma:ffffff800abc7670
1278[ 10.573004@0] fb: malloc_osd_memory, 1283, base:0x0000000077800000, size:8388 608
1279[ 10.573006@0] fb: use ion buffer for fb memory, fb_index=2
1280[ 10.576631@0] meson-fb meson-fb: create ion_client ffffffc0aa5edcc0, handle=f fffffc0dc4bb6c0
1281[ 10.576638@0] meson-fb meson-fb: ion memory(2): created fb at 0x00000000ed500 000, size 1 MiB
1282[ 10.576640@0] fb: Frame buffer memory assigned at
1283[ 10.576643@0] fb: 2, phy: 0x00000000ed500000, vir:0xffffff800fc21000, size=1 024K
1284[ 10.576643@0]
1285[ 10.576647@0] fb: logo_index=0,fb_index=2
1286[ 10.576649@0] fb: ---------------clear fb2 memory ffffff800fc21000
1287[ 10.576999@0] fb: osd[2] canvas.idx =0x41
1288[ 10.577001@0] fb: osd[2] canvas.addr=0xed500000
1289[ 10.577002@0] fb: osd[2] canvas.width=128
1290[ 10.577004@0] fb: osd[2] canvas.height=32
1291[ 10.577005@0] fb: osd[2] frame.width=32
1292[ 10.577006@0] fb: osd[2] frame.height=32
1293[ 10.577008@0] fb: osd[2] out_addr_id =0x3
1294[ 10.578368@0] fb: vpu clkc clock is 199 MHZ
1295[ 10.578374@0] vpu: switch_vpu_mem_pd: unsupport vpu mod: 53
1296[ 10.578379@0] fb: malloc_osd_memory, cma:ffffff800abc7670
1297[ 10.578381@0] fb: malloc_osd_memory, 1283, base:0x0000000077800000, size:8388 608
1298[ 10.578383@0] fb: use ion buffer for fb memory, fb_index=3
1299[ 10.590888@3] meson-fb meson-fb: create ion_client ffffffc0aa5edcc0, handle=f fffffc0de56eb80
1300[ 10.590896@3] meson-fb meson-fb: ion memory(3): created fb at 0x00000000ed600 000, size 8 MiB
1301[ 10.590899@3] fb: Frame buffer memory assigned at
1302[ 10.590903@3] fb: 3, phy: 0x00000000ed600000, vir:0xffffff800fd22000, size=8 192K
1303[ 10.590903@3]
1304[ 10.590905@3] fb: logo_index=0,fb_index=3
1305[ 10.590907@3] fb: ---------------clear fb3 memory ffffff800fd22000
1306[ 10.593686@3] fb: osd[3] canvas.idx =0x42
1307[ 10.593687@3] fb: osd[3] canvas.addr=0xed600000
1308[ 10.593689@3] fb: osd[3] canvas.width=128
1309[ 10.593691@3] fb: osd[3] canvas.height=32
1310[ 10.593692@3] fb: osd[3] frame.width=32
1311[ 10.593694@3] fb: osd[3] frame.height=32
1312[ 10.593695@3] fb: osd[3] out_addr_id =0x4
1313[ 14.159681@3] asoc-aml-card auge_sound: S/PDIF Capture disable
1314[ 14.159814@3] aml_spdif_close
1315[ 14.159914@3] audio_ddr_mngr: toddrs[0] released by device ff642000.audiobus: spdif
1316[ 47.452022@1] fb: osd_release now.index=0,open_count=1
1317[ 47.452041@1] fb: osd_release now.index=1,open_count=1
1318[ 47.452051@1] fb: osd_release now.index=2,open_count=1
1319[ 47.452060@1] fb: osd_release now.index=3,open_count=1
1320[ 47.731110@0] asoc-aml-card auge_sound: S/PDIF Playback disable
1321[ 47.731194@0] spdif_b keep clk continuous
1322[ 47.731200@0] aml_spdif_close
1323[ 47.731378@0] audio_ddr_mngr: frddrs[0] released by device ff642000.audiobus: spdif_b
1324[ 47.996981@3] fb: osd_release now.index=0,open_count=1
1325[ 50.064143@3] wlan0: authenticate with 4c:f9:5d:d5:d1:10
1326[ 50.093848@3] wlan0: send auth to 4c:f9:5d:d5:d1:10 (try 1/3)
1327[ 50.095361@0] wlan0: authenticated
1328[ 50.098857@0] wlan0: associate with 4c:f9:5d:d5:d1:10 (try 1/3)
1329[ 50.102085@0] wlan0: RX AssocResp from 4c:f9:5d:d5:d1:10 (capab=0x1411 status =0 aid=2)
1330[ 50.104743@0] wlan0: associated
1331[ 50.139619@0] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
1332[ 50.145587@0] wlan0: Limiting TX power to 30 (30 - 0) dBm as advertised by 4c :f9:5d:d5:d1:10
1333[ 53.374159@2] fb: osd_release now.index=0,open_count=1
1334[ 53.378387@2] fb: osd_release now.index=0,open_count=1
1335[ 53.830767@0] fb: osd_release now.index=0,open_count=1
1336[ 55.098519@0] fb: osd_release now.index=0,open_count=1
1337[ 55.098538@0] fb: osd_release now.index=1,open_count=1
1338[ 55.098548@0] fb: osd_release now.index=2,open_count=1
1339[ 55.098557@0] fb: osd_release now.index=3,open_count=1
1340[ 55.767796@0] aml_spdif_open
1341[ 55.767968@0] audio_ddr_mngr: toddrs[0] registered by device ff642000.audiobu s:spdif
1342[ 55.768370@0] aml_dai_set_spdif_fmt , fmt 0x4010
1343[ 55.768430@0] aml_spdif_fifo_ctrl, bit depth:16, frddr type:1, toddr:type:1
1344[ 55.769834@0] aml_spdif_close
1345[ 55.769889@0] audio_ddr_mngr: toddrs[0] released by device ff642000.audiobus: spdif
1346[ 55.770267@0] spdif_b keep clk continuous
1347[ 55.770269@0] aml_spdif_open
1348[ 55.770373@0] audio_ddr_mngr: frddrs[0] registered by device ff642000.audiobu s:spdif_b
1349[ 55.770553@0] set normal 512 fs /4 fs
1350[ 55.770575@0] set spdifout clk:5644800, mpll:22579200
1351[ 55.770577@0] get spdifout clk:5644797, mpll:22579186
1352[ 55.770580@0] aml_dai_set_spdif_fmt , fmt 0x4010
1353[ 55.770583@0] set normal 512 fs /4 fs
1354[ 55.770590@0] set spdifout clk:5644800, mpll:22579200
1355[ 55.770591@0] get spdifout clk:5644797, mpll:22579186
1356[ 55.770628@0] spdif_info: rate: 44100, channel status ch0_l:0x100, ch0_r:0x10 0, ch1_l:0x0, ch1_r:0x0
1357[ 55.770633@0] hdmitx: err chn setting, must be 2, 4, 6 or 8, Rst as def
1358[ 55.770635@0] hdmitx: err chn msk, must larger than 0
1359[ 55.770638@0] hdmitx: hw: set audio
1360[ 55.770641@0] hdmitx: hw: hdmitx tx_aud_src = 0, audio_param->channel_num = 0 , hdev->aud_output_ch = 0
1361[ 55.770654@0] hdmitx: fs = 2, cd = 8, tmds_clk = 148352
1362[ 55.770656@0] hdmitx: hw: aud_n_para = 8918
1363[ 55.770663@0] hdmitx: hw: set channel status
1364[ 55.770690@0] hdmitx: audio: Audio Type: PCM
1365[ 55.770692@0] hdmitx: audio: set audio param
1366[ 55.770695@0] aml_spdif_fifo_ctrl, bit depth:16, frddr type:1, toddr:type:1
1367[ 55.775822@0] aml_spdif_open
1368[ 55.776046@0] audio_ddr_mngr: toddrs[0] registered by device ff642000.audiobu s:spdif
1369[ 55.776447@0] aml_dai_set_spdif_fmt , fmt 0x4010
1370[ 55.776503@0] aml_spdif_fifo_ctrl, bit depth:16, frddr type:1, toddr:type:1
1371[ 55.776641@0] spdif_b keep clk continuous
1372[ 55.776645@0] aml_spdif_close
1373[ 55.776685@0] audio_ddr_mngr: frddrs[0] released by device ff642000.audiobus: spdif_b
1374[ 55.776737@0] aml_spdif_close
1375[ 55.776759@0] audio_ddr_mngr: toddrs[0] released by device ff642000.audiobus: spdif
1376[ 55.777833@0] audio_ddr_mngr: frddrs[0] registered by device ff642000.audiobu s:tdmc
1377[ 55.778749@0] aml_dai_set_tdm_sysclk(), mpll no change, keep clk
1378[ 55.778751@0] aml_dai_set_tdm_sysclk(), mclk no change, keep clk
1379[ 55.778755@0] set mclk:11289600, mpll:22579200, get mclk:11289593, mpll:22579 186
1380[ 55.778760@0] asoc aml_dai_set_tdm_fmt, 0x4011, ffffffc0e0507d18, id(2), clks el(2)
1381[ 55.778761@0] aml_dai_set_tdm_fmt(), fmt not change
1382[ 55.778765@0] dump_pcm_setting(ffffffc0e0507d18)
1383[ 55.778766@0] pcm_mode(1)
1384[ 55.778767@0] sysclk(11289600)
1385[ 55.778769@0] sysclk_bclk_ratio(4)
1386[ 55.778770@0] bclk(2822400)
1387[ 55.778771@0] bclk_lrclk_ratio(64)
1388[ 55.778773@0] lrclk(44100)
1389[ 55.778774@0] tx_mask(0x3)
1390[ 55.778775@0] rx_mask(0x3)
1391[ 55.778776@0] slots(2)
1392[ 55.778777@0] slot_width(32)
1393[ 55.778778@0] lane_mask_in(0x2)
1394[ 55.778780@0] lane_mask_out(0xf)
1395[ 55.778781@0] lane_oe_mask_in(0x0)
1396[ 55.778782@0] lane_oe_mask_out(0x0)
1397[ 55.778783@0] lane_lb_mask_in(0x0)
1398[ 55.778785@0] aml_dai_set_tdm_sysclk(), mpll no change, keep clk
1399[ 55.778786@0] aml_dai_set_tdm_sysclk(), mclk no change, keep clk
1400[ 55.778788@0] set mclk:11289600, mpll:22579200, get mclk:11289593, mpll:22579 186
1401[ 55.778790@0] aml_dai_set_clkdiv, div 4, clksel(2)
1402[ 55.778795@0] aml_dai_set_bclk_ratio, select I2S mode
1403[ 55.778802@0] mclk is not configured
1404[ 55.779023@0] tdm playback mute: 0, lane_cnt = 4
1405[ 55.780852@0] aml_spdif_open
1406[ 55.781008@0] audio_ddr_mngr: toddrs[0] registered by device ff642000.audiobu s:spdif
1407[ 55.781411@0] aml_dai_set_spdif_fmt , fmt 0x4010
1408[ 55.781468@0] aml_spdif_fifo_ctrl, bit depth:16, frddr type:1, toddr:type:1
1409[ 55.781653@0] tdm playback mute: 1, lane_cnt = 4
1410[ 55.781711@0] audio_ddr_mngr: frddrs[0] released by device ff642000.audiobus: tdmc
1411[ 55.781789@0] aml_spdif_close
1412[ 55.781814@0] audio_ddr_mngr: toddrs[0] released by device ff642000.audiobus: spdif
1413[ 55.782536@0] spdif_a keep clk continuous
1414[ 55.782540@0] aml_spdif_open
1415[ 55.782660@0] audio_ddr_mngr: frddrs[0] registered by device ff642000.audiobu s:spdif
1416[ 55.783083@0] set normal 512 fs /4 fs
1417[ 55.783109@0] set spdifout clk:5644800, mpll:22579200
1418[ 55.783112@0] get spdifout clk:5644797, mpll:22579186
1419[ 55.783114@0] aml_dai_set_spdif_fmt , fmt 0x4010
1420[ 55.783117@0] set normal 512 fs /4 fs
1421[ 55.783124@0] set spdifout clk:5644800, mpll:22579200
1422[ 55.783126@0] get spdifout clk:5644797, mpll:22579186
1423[ 55.783172@0] spdif_info: rate: 44100, channel status ch0_l:0x100, ch0_r:0x10 0, ch1_l:0x0, ch1_r:0x0
1424[ 55.783179@0] aml_spdif_fifo_ctrl, bit depth:16, frddr type:1, toddr:type:1
1425[ 55.785205@2] aml_spdif_open
1426[ 55.785365@2] audio_ddr_mngr: toddrs[0] registered by device ff642000.audiobu s:spdif
1427[ 55.785798@2] aml_dai_set_spdif_fmt , fmt 0x4010
1428[ 55.785885@2] aml_spdif_fifo_ctrl, bit depth:16, frddr type:1, toddr:type:1
1429[ 55.786082@2] spdif_a keep clk continuous
1430[ 55.786086@2] aml_spdif_close
1431[ 55.786163@2] audio_ddr_mngr: frddrs[0] released by device ff642000.audiobus: spdif
1432[ 55.786208@2] aml_spdif_close
1433[ 55.786235@2] audio_ddr_mngr: toddrs[0] released by device ff642000.audiobus: spdif
1434[ 55.787135@2] spdif_b keep clk continuous
1435[ 55.787140@2] aml_spdif_open
1436[ 55.787267@2] audio_ddr_mngr: frddrs[0] registered by device ff642000.audiobu s:spdif_b
1437[ 55.787652@2] set normal 512 fs /4 fs
1438[ 55.787675@2] set spdifout clk:5644800, mpll:22579200
1439[ 55.787677@2] get spdifout clk:5644797, mpll:22579186
1440[ 55.787680@2] aml_dai_set_spdif_fmt , fmt 0x4010
1441[ 55.787683@2] set normal 512 fs /4 fs
1442[ 55.787690@2] set spdifout clk:5644800, mpll:22579200
1443[ 55.787691@2] get spdifout clk:5644797, mpll:22579186
1444[ 55.787737@2] spdif_info: rate: 44100, channel status ch0_l:0x100, ch0_r:0x10 0, ch1_l:0x0, ch1_r:0x0
1445[ 55.787742@2] hdmitx: err chn setting, must be 2, 4, 6 or 8, Rst as def
1446[ 55.787744@2] hdmitx: err chn msk, must larger than 0
1447[ 55.787747@2] hdmitx: hw: set audio
1448[ 55.787750@2] hdmitx: hw: hdmitx tx_aud_src = 0, audio_param->channel_num = 1 , hdev->aud_output_ch = 0
1449[ 55.787763@2] hdmitx: fs = 2, cd = 8, tmds_clk = 148352
1450[ 55.787766@2] hdmitx: hw: aud_n_para = 8918
1451[ 55.787773@2] hdmitx: hw: set channel status
1452[ 55.787800@2] hdmitx: audio: Audio Type: PCM
1453[ 55.787802@2] hdmitx: audio: set audio param
1454[ 55.787805@2] aml_spdif_fifo_ctrl, bit depth:16, frddr type:1, toddr:type:1
1455[ 55.789844@2] aml_spdif_open
1456[ 55.789990@2] audio_ddr_mngr: toddrs[0] registered by device ff642000.audiobu s:spdif
1457[ 55.790386@2] aml_dai_set_spdif_fmt , fmt 0x4010
1458[ 55.790438@2] aml_spdif_fifo_ctrl, bit depth:16, frddr type:1, toddr:type:1
1459[ 55.790579@2] spdif_b keep clk continuous
1460[ 55.790583@2] aml_spdif_close
1461[ 55.790624@2] audio_ddr_mngr: frddrs[0] released by device ff642000.audiobus: spdif_b
1462[ 55.790674@2] aml_spdif_close
1463[ 55.790696@2] audio_ddr_mngr: toddrs[0] released by device ff642000.audiobus: spdif
1464[ 55.791427@2] spdif_b keep clk continuous
1465[ 55.791431@2] aml_spdif_open
1466[ 55.791566@2] audio_ddr_mngr: frddrs[0] registered by device ff642000.audiobu s:spdif_b
1467[ 55.791944@2] set normal 512 fs /4 fs
1468[ 55.791967@2] set spdifout clk:5644800, mpll:22579200
1469[ 55.791969@2] get spdifout clk:5644797, mpll:22579186
1470[ 55.791972@2] aml_dai_set_spdif_fmt , fmt 0x4010
1471[ 55.791975@2] set normal 512 fs /4 fs
1472[ 55.791981@2] set spdifout clk:5644800, mpll:22579200
1473[ 55.791983@2] get spdifout clk:5644797, mpll:22579186
1474[ 55.792028@2] spdif_info: rate: 44100, channel status ch0_l:0x100, ch0_r:0x10 0, ch1_l:0x0, ch1_r:0x0
1475[ 55.792034@2] hdmitx: err chn setting, must be 2, 4, 6 or 8, Rst as def
1476[ 55.792035@2] hdmitx: err chn msk, must larger than 0
1477[ 55.792039@2] hdmitx: hw: set audio
1478[ 55.792042@2] hdmitx: hw: hdmitx tx_aud_src = 0, audio_param->channel_num = 5 , hdev->aud_output_ch = 0
1479[ 55.792056@2] hdmitx: fs = 2, cd = 8, tmds_clk = 148352
1480[ 55.792058@2] hdmitx: hw: aud_n_para = 8918
1481[ 55.792065@2] hdmitx: hw: set channel status
1482[ 55.792093@2] hdmitx: audio: Audio Type: PCM
1483[ 55.792095@2] hdmitx: audio: set audio param
1484[ 55.792097@2] aml_spdif_fifo_ctrl, bit depth:16, frddr type:1, toddr:type:1
1485[ 55.794024@2] aml_spdif_open
1486[ 55.794173@2] audio_ddr_mngr: toddrs[0] registered by device ff642000.audiobu s:spdif
1487[ 55.794544@2] aml_dai_set_spdif_fmt , fmt 0x4010
1488[ 55.794598@2] aml_spdif_fifo_ctrl, bit depth:16, frddr type:1, toddr:type:1
1489[ 55.794745@2] spdif_b keep clk continuous
1490[ 55.794749@2] aml_spdif_close
1491[ 55.794791@2] audio_ddr_mngr: frddrs[0] released by device ff642000.audiobus: spdif_b
1492[ 55.794874@2] aml_spdif_close
1493[ 55.794901@2] audio_ddr_mngr: toddrs[0] released by device ff642000.audiobus: spdif
1494[ 55.795629@0] spdif_b keep clk continuous
1495[ 55.795632@0] aml_spdif_open
1496[ 55.795764@0] audio_ddr_mngr: frddrs[0] registered by device ff642000.audiobu s:spdif_b
1497[ 55.796156@0] set normal 512 fs /4 fs
1498[ 55.796180@0] set spdifout clk:5644800, mpll:22579200
1499[ 55.796183@0] get spdifout clk:5644797, mpll:22579186
1500[ 55.796185@0] aml_dai_set_spdif_fmt , fmt 0x4010
1501[ 55.796188@0] set normal 512 fs /4 fs
1502[ 55.796195@0] set spdifout clk:5644800, mpll:22579200
1503[ 55.796196@0] get spdifout clk:5644797, mpll:22579186
1504[ 55.796241@0] spdif_info: rate: 44100, channel status ch0_l:0x100, ch0_r:0x10 0, ch1_l:0x0, ch1_r:0x0
1505[ 55.796247@0] hdmitx: err chn setting, must be 2, 4, 6 or 8, Rst as def
1506[ 55.796248@0] hdmitx: err chn msk, must larger than 0
1507[ 55.796252@0] hdmitx: hw: set audio
1508[ 55.796255@0] hdmitx: hw: hdmitx tx_aud_src = 1, audio_param->channel_num = 7 , hdev->aud_output_ch = 0
1509[ 55.796267@0] hdmitx: fs = 2, cd = 8, tmds_clk = 148352
1510[ 55.796269@0] hdmitx: hw: aud_n_para = 8918
1511[ 55.796276@0] hdmitx: hw: set channel status
1512[ 55.822845@0] hdmitx: audio: Audio Type: PCM
1513[ 55.822849@0] hdmitx: audio: set audio param
1514[ 55.822855@0] aml_spdif_fifo_ctrl, bit depth:16, frddr type:1, toddr:type:1
1515[ 55.824908@0] aml_spdif_open
1516[ 55.825046@0] audio_ddr_mngr: toddrs[0] registered by device ff642000.audiobu s:spdif
1517[ 55.825404@0] aml_dai_set_spdif_fmt , fmt 0x4010
1518[ 55.825457@0] aml_spdif_fifo_ctrl, bit depth:16, frddr type:1, toddr:type:1
1519[ 55.825597@0] spdif_b keep clk continuous
1520[ 55.825600@0] aml_spdif_close
1521[ 55.825642@0] audio_ddr_mngr: frddrs[0] released by device ff642000.audiobus: spdif_b
1522[ 55.825690@0] aml_spdif_close
1523[ 55.825712@0] audio_ddr_mngr: toddrs[0] released by device ff642000.audiobus: spdif
1524[ 55.836456@0] spdif_b keep clk continuous
1525[ 55.836462@0] aml_spdif_open
1526[ 55.836604@0] audio_ddr_mngr: frddrs[0] registered by device ff642000.audiobu s:spdif_b
1527[ 55.836952@0] set normal 512 fs /4 fs
1528[ 55.836975@0] set spdifout clk:5644800, mpll:22579200
1529[ 55.836977@0] get spdifout clk:5644797, mpll:22579186
1530[ 55.836980@0] aml_dai_set_spdif_fmt , fmt 0x4010
1531[ 55.836983@0] set normal 512 fs /4 fs
1532[ 55.836989@0] set spdifout clk:5644800, mpll:22579200
1533[ 55.836991@0] get spdifout clk:5644797, mpll:22579186
1534[ 55.837066@0] spdif_info: rate: 44100, channel status ch0_l:0x100, ch0_r:0x10 0, ch1_l:0x0, ch1_r:0x0
1535[ 55.837072@0] hdmitx: err chn setting, must be 2, 4, 6 or 8, Rst as def
1536[ 55.837073@0] hdmitx: err chn msk, must larger than 0
1537[ 55.837076@0] hdmitx: hw: set audio
1538[ 55.837079@0] hdmitx: hw: hdmitx tx_aud_src = 0, audio_param->channel_num = 1 , hdev->aud_output_ch = 0
1539[ 55.837092@0] hdmitx: fs = 2, cd = 8, tmds_clk = 148352
1540[ 55.837095@0] hdmitx: hw: aud_n_para = 8918
1541[ 55.837101@0] hdmitx: hw: set channel status
1542[ 55.837129@0] hdmitx: audio: Audio Type: PCM
1543[ 55.837131@0] hdmitx: audio: set audio param
1544[ 55.837134@0] aml_spdif_fifo_ctrl, bit depth:16, frddr type:1, toddr:type:1
1545[ 55.840246@0] asoc-aml-card auge_sound: S/PDIF Playback enable
1546[ 55.842274@0] aml_spdif_open
1547[ 55.843646@0] audio_ddr_mngr: toddrs[0] registered by device ff642000.audiobu s:spdif
1548[ 55.844256@0] aml_dai_set_spdif_fmt , fmt 0x4010
1549[ 55.844353@0] aml_spdif_fifo_ctrl, bit depth:16, frddr type:1, toddr:type:1
1550[ 55.848149@3] asoc-aml-card auge_sound: S/PDIF Capture enable
1551[ 55.916360@1] fb: osd_release now.index=0,open_count=1
1552[ 60.848380@3] asoc-aml-card auge_sound: S/PDIF Capture disable
1553[ 60.848521@3] aml_spdif_close
1554[ 60.848569@3] audio_ddr_mngr: toddrs[0] released by device ff642000.audiobus: spdif
1555[ 62.466841@0] fb: mem_free_work, free memory: addr:800000
1556[ 2722.433528@0] usb 1-1: USB disconnect, device number 2
1557[ 2722.433709@0] xpad 1-1:1.0: xpad_try_sending_next_out_packet - usb_submit_urb failed with result -19
1558[ 2741.866577@0] usb 1-1: new full-speed USB device number 4 using xhci-hcd
1559[ 2742.009027@0] usb 1-1: New USB device found, idVendor=045e, idProduct=028e
1560[ 2742.009034@0] usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber =3
1561[ 2742.009036@0] usb 1-1: Product: Inno GamePad..
1562[ 2742.009039@0] usb 1-1: Manufacturer: Inno GamePad..
1563[ 2742.009042@0] usb 1-1: SerialNumber: 0000001
1564[ 2742.075738@0] input: Microsoft X-Box 360 pad as /devices/platform/ff500000.dw c3/xhci-hcd.0.auto/usb1/1-1/1-1:1.0/input/input5
1565[ 2742.076754@0] usb 1-1: Unsupported device
1566[ 2742.076967@0] usb 1-1: Unsupported device
1567[ 2742.078460@0] usb 1-1: Unsupported device
1568[ 3272.035481@1] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
1569[ 3279.894720@0] wlan0: authenticate with 4c:f9:5d:d5:d1:10
1570[ 3279.945180@0] wlan0: send auth to 4c:f9:5d:d5:d1:10 (try 1/3)
1571[ 3279.949587@0] wlan0: authenticated
1572[ 3279.951236@0] wlan0: associate with 4c:f9:5d:d5:d1:10 (try 1/3)
1573[ 3279.954457@1] wlan0: RX AssocResp from 4c:f9:5d:d5:d1:10 (capab=0x1411 status =0 aid=2)
1574[ 3279.957644@1] wlan0: associated
1575[ 3279.982291@1] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
1576[ 3280.019924@0] wlan0: Limiting TX power to 30 (30 - 0) dBm as advertised by 4c :f9:5d:d5:d1:10