· 6 years ago · Mar 12, 2020, 08:10 PM
1root@1f2edde:~# dmesg
2[ 0.000000] Booting Linux on physical CPU 0x0000000000 [0x410fd083]
3[ 0.000000] Linux version 4.19.71 (oe-user@oe-host) (gcc version 8.3.0 (GCC)) #1 SMP PREEMPT Fri Jan 31 09:22:51 UTC 2020
4[ 0.000000] Machine model: Raspberry Pi 4 Model B Rev 1.1
5[ 0.000000] efi: Getting EFI parameters from FDT:
6[ 0.000000] efi: UEFI not found.
7[ 0.000000] cma: Reserved 256 MiB at 0x000000001ec00000
8[ 0.000000] On node 0 totalpages: 1025536
9[ 0.000000] DMA32 zone: 4096 pages used for memmap
10[ 0.000000] DMA32 zone: 0 pages reserved
11[ 0.000000] DMA32 zone: 255488 pages, LIFO batch:63
12[ 0.000000] Normal zone: 12032 pages used for memmap
13[ 0.000000] Normal zone: 770048 pages, LIFO batch:63
14[ 0.000000] random: get_random_bytes called from start_kernel+0xa0/0x464 with crng_init=0
15[ 0.000000] percpu: Embedded 24 pages/cpu s57880 r8192 d32232 u98304
16[ 0.000000] pcpu-alloc: s57880 r8192 d32232 u98304 alloc=24*4096
17[ 0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3
18[ 0.000000] Detected PIPT I-cache on CPU0
19[ 0.000000] CPU features: enabling workaround for EL2 vector hardening
20[ 0.000000] CPU features: detected: Kernel page table isolation (KPTI)
21[ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 1009408
22[ 0.000000] Kernel command line: coherent_pool=1M 8250.nr_uarts=0 cma=64M cma=256M smsc95xx.macaddr=DC:A6:32:47:74:01 vc_mem.mem_base=0x3f000000 vc_mem.mem_size=0x3f600000 dwc_otg.lpm_enable=0 console=null rootfstype=ext4 rootwait vt.global_cursor_default=0 root=PARTUUID=a1fb009e-03 rootwait
23[ 0.000000] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
24[ 0.000000] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
25[ 0.000000] software IO TLB: mapped [mem 0x3a5ff000-0x3e5ff000] (64MB)
26[ 0.000000] Memory: 3677824K/4102144K available (8828K kernel code, 1012K rwdata, 2860K rodata, 9920K init, 933K bss, 162176K reserved, 262144K cma-reserved)
27[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
28[ 0.000000] ftrace: allocating 31452 entries in 123 pages
29[ 0.000000] rcu: Preemptible hierarchical RCU implementation.
30[ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=64 to nr_cpu_ids=4.
31[ 0.000000] Tasks RCU enabled.
32[ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
33[ 0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0
34[ 0.000000] GIC: Using split EOI/Deactivate mode
35[ 0.000000] arch_timer: cp15 timer(s) running at 54.00MHz (phys).
36[ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0xc743ce346, max_idle_ns: 440795203123 ns
37[ 0.000005] sched_clock: 56 bits at 54MHz, resolution 18ns, wraps every 4398046511102ns
38[ 0.000226] Console: colour dummy device 80x25
39[ 0.000277] Calibrating delay loop (skipped), value calculated using timer frequency.. 108.00 BogoMIPS (lpj=216000)
40[ 0.000301] pid_max: default: 32768 minimum: 301
41[ 0.000594] Mount-cache hash table entries: 8192 (order: 4, 65536 bytes)
42[ 0.000652] Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes)
43[ 0.024037] ASID allocator initialised with 32768 entries
44[ 0.032035] rcu: Hierarchical SRCU implementation.
45[ 0.040539] EFI services will not be available.
46[ 0.048090] smp: Bringing up secondary CPUs ...
47[ 0.080281] Detected PIPT I-cache on CPU1
48[ 0.080343] CPU1: Booted secondary processor 0x0000000001 [0x410fd083]
49[ 0.112370] Detected PIPT I-cache on CPU2
50[ 0.112412] CPU2: Booted secondary processor 0x0000000002 [0x410fd083]
51[ 0.144480] Detected PIPT I-cache on CPU3
52[ 0.144522] CPU3: Booted secondary processor 0x0000000003 [0x410fd083]
53[ 0.144664] smp: Brought up 1 node, 4 CPUs
54[ 0.144701] SMP: Total of 4 processors activated.
55[ 0.144717] CPU features: detected: 32-bit EL0 Support
56[ 0.149135] CPU: All CPU(s) started at EL2
57[ 0.149178] alternatives: patching kernel code
58[ 0.150471] devtmpfs: initialized
59[ 0.158527] Enabled cp15_barrier support
60[ 0.158562] Enabled setend support
61[ 0.158933] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
62[ 0.158960] futex hash table entries: 1024 (order: 4, 65536 bytes)
63[ 0.165495] pinctrl core: initialized pinctrl subsystem
64[ 0.166121] DMI not present or invalid.
65[ 0.166526] NET: Registered protocol family 16
66[ 0.167761] cpuidle: using governor menu
67[ 0.168064] vdso: 2 pages (1 code @ (____ptrval____), 1 data @ (____ptrval____))
68[ 0.168082] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers.
69[ 0.170722] DMA: preallocated 1024 KiB pool for atomic allocations
70[ 0.170818] Serial: AMBA PL011 UART driver
71[ 0.174119] bcm2835-mbox fe00b880.mailbox: mailbox enabled
72[ 0.205939] bcm2835-dma fe007000.dma: DMA legacy API manager at (____ptrval____), dmachans=0x1
73[ 0.208150] vgaarb: loaded
74[ 0.208469] SCSI subsystem initialized
75[ 0.208654] usbcore: registered new interface driver usbfs
76[ 0.208707] usbcore: registered new interface driver hub
77[ 0.208818] usbcore: registered new device driver usb
78[ 0.209163] pps_core: LinuxPPS API ver. 1 registered
79[ 0.209177] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
80[ 0.209201] PTP clock support registered
81[ 0.216988] raspberrypi-firmware soc:firmware: Attached to firmware from 2019-08-28 15:06, variant start_cd
82[ 0.220946] raspberrypi-firmware soc:firmware: Firmware hash is 37b3ec82ae67937050af33d61eadf0445377646b
83[ 0.226264] clocksource: Switched to clocksource arch_sys_counter
84[ 0.301798] VFS: Disk quotas dquot_6.6.0
85[ 0.301891] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
86[ 0.302085] FS-Cache: Loaded
87[ 0.302298] CacheFiles: Loaded
88[ 0.309957] NET: Registered protocol family 2
89[ 0.310673] tcp_listen_portaddr_hash hash table entries: 2048 (order: 3, 32768 bytes)
90[ 0.310725] TCP established hash table entries: 32768 (order: 6, 262144 bytes)
91[ 0.310945] TCP bind hash table entries: 32768 (order: 7, 524288 bytes)
92[ 0.311405] TCP: Hash tables configured (established 32768 bind 32768)
93[ 0.311601] UDP hash table entries: 2048 (order: 4, 65536 bytes)
94[ 0.311670] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
95[ 0.311923] NET: Registered protocol family 1
96[ 0.316642] RPC: Registered named UNIX socket transport module.
97[ 0.316658] RPC: Registered udp transport module.
98[ 0.316670] RPC: Registered tcp transport module.
99[ 0.316681] RPC: Registered tcp NFSv4.1 backchannel transport module.
100[ 0.316699] PCI: CLS 0 bytes, default 64
101[ 0.382818] hw perfevents: enabled with armv8_cortex_a72 PMU driver, 7 counters available
102[ 0.384744] Initialise system trusted keyrings
103[ 0.385002] workingset: timestamp_bits=46 max_order=20 bucket_order=0
104[ 0.392216] squashfs: version 4.0 (2009/01/31) Phillip Lougher
105[ 0.392267] FS-Cache: Netfs 'nfs' registered for caching
106[ 0.392958] NFS: Registering the id_resolver key type
107[ 0.392992] Key type id_resolver registered
108[ 0.393005] Key type id_legacy registered
109[ 0.393027] nfs4filelayout_init: NFSv4 File Layout Driver Registering...
110[ 0.395805] Key type asymmetric registered
111[ 0.395824] Asymmetric key parser 'x509' registered
112[ 0.395875] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 249)
113[ 0.396074] io scheduler noop registered
114[ 0.396089] io scheduler deadline registered
115[ 0.396245] io scheduler cfq registered (default)
116[ 0.396259] io scheduler mq-deadline registered
117[ 0.396271] io scheduler kyber registered
118[ 0.431287] brcm-pcie fd500000.pcie: dmabounce: initialised - 32768 kB, threshold 0x00000000c0000000
119[ 0.431320] brcm-pcie fd500000.pcie: could not get clock
120[ 0.431397] brcm-pcie fd500000.pcie: host bridge /scb/pcie@7d500000 ranges:
121[ 0.431444] brcm-pcie fd500000.pcie: MEM 0x600000000..0x603ffffff -> 0xf8000000
122[ 0.482304] brcm-pcie fd500000.pcie: link up, 5.0 Gbps x1 (!SSC)
123[ 0.482612] brcm-pcie fd500000.pcie: PCI host bridge to bus 0000:00
124[ 0.482633] pci_bus 0000:00: root bus resource [bus 00-01]
125[ 0.482651] pci_bus 0000:00: root bus resource [mem 0x600000000-0x603ffffff] (bus address [0xf8000000-0xfbffffff])
126[ 0.482703] pci 0000:00:00.0: [14e4:2711] type 01 class 0x060400
127[ 0.482862] pci 0000:00:00.0: PME# supported from D0 D3hot
128[ 0.485780] pci 0000:00:00.0: bridge configuration invalid ([bus 00-00]), reconfiguring
129[ 0.485997] pci 0000:01:00.0: [1106:3483] type 00 class 0x0c0330
130[ 0.486125] pci 0000:01:00.0: reg 0x10: [mem 0x00000000-0x00000fff 64bit]
131[ 0.486525] pci 0000:01:00.0: PME# supported from D0 D3cold
132[ 0.489361] pci_bus 0000:01: busn_res: [bus 01] end is updated to 01
133[ 0.489413] pci 0000:00:00.0: BAR 8: assigned [mem 0x600000000-0x6000fffff]
134[ 0.489437] pci 0000:01:00.0: BAR 0: assigned [mem 0x600000000-0x600000fff 64bit]
135[ 0.489512] pci 0000:00:00.0: PCI bridge to [bus 01]
136[ 0.489533] pci 0000:00:00.0: bridge window [mem 0x600000000-0x6000fffff]
137[ 0.489632] pci 0000:00:00.0: enabling device (0000 -> 0002)
138[ 0.489687] pci 0000:01:00.0: enabling device (0000 -> 0002)
139[ 0.492784] iproc-rng200 fe104000.rng: hwrng registered
140[ 0.493080] vc-mem: phys_addr:0x00000000 mem_base=0x3f000000 mem_size:0x3f600000(1014 MiB)
141[ 0.493703] gpiomem-bcm2835 fe200000.gpiomem: Initialised: Registers at 0xfe200000
142[ 0.493994] cacheinfo: Unable to detect cache hierarchy for CPU 0
143[ 0.503558] brd: module loaded
144[ 0.513300] loop: module loaded
145[ 0.514116] Loading iSCSI transport class v2.0-870.
146[ 0.515906] libphy: Fixed MDIO Bus: probed
147[ 0.515947] tun: Universal TUN/TAP device driver, 1.6
148[ 0.516574] bcmgenet fd580000.genet: failed to get enet clock
149[ 0.516595] bcmgenet fd580000.genet: GENET 5.0 EPHY: 0x0000
150[ 0.516616] bcmgenet fd580000.genet: failed to get enet-wol clock
151[ 0.516635] bcmgenet fd580000.genet: failed to get enet-eee clock
152[ 0.516661] bcmgenet: Skipping UMAC reset
153[ 0.516876] unimac-mdio unimac-mdio.-19: DMA mask not set
154[ 0.526296] libphy: bcmgenet MII bus: probed
155[ 0.555092] unimac-mdio unimac-mdio.-19: Broadcom UniMAC MDIO bus at 0x(____ptrval____)
156[ 0.556342] xhci_hcd 0000:01:00.0: xHCI Host Controller
157[ 0.556376] xhci_hcd 0000:01:00.0: new USB bus registered, assigned bus number 1
158[ 0.561954] xhci_hcd 0000:01:00.0: hcc params 0x002841eb hci version 0x100 quirks 0x0000001000000890
159[ 0.562283] genirq: irq_chip Brcm_MSI did not update eff. affinity mask of irq 43
160[ 0.563223] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 4.19
161[ 0.563241] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
162[ 0.563257] usb usb1: Product: xHCI Host Controller
163[ 0.563271] usb usb1: Manufacturer: Linux 4.19.71 xhci-hcd
164[ 0.563284] usb usb1: SerialNumber: 0000:01:00.0
165[ 0.563802] hub 1-0:1.0: USB hub found
166[ 0.563888] hub 1-0:1.0: 1 port detected
167[ 0.564373] xhci_hcd 0000:01:00.0: xHCI Host Controller
168[ 0.564397] xhci_hcd 0000:01:00.0: new USB bus registered, assigned bus number 2
169[ 0.564419] xhci_hcd 0000:01:00.0: Host supports USB 3.0 SuperSpeed
170[ 0.564829] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 4.19
171[ 0.564845] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
172[ 0.564860] usb usb2: Product: xHCI Host Controller
173[ 0.564874] usb usb2: Manufacturer: Linux 4.19.71 xhci-hcd
174[ 0.564887] usb usb2: SerialNumber: 0000:01:00.0
175[ 0.565342] hub 2-0:1.0: USB hub found
176[ 0.565406] hub 2-0:1.0: 4 ports detected
177[ 0.566318] dwc_otg: version 3.00a 10-AUG-2012 (platform bus)
178[ 0.566631] dwc_otg fe980000.usb: base=(____ptrval____)
179[ 0.769546] Core Release: 2.80a
180[ 0.769564] Setting default values for core params
181[ 0.769598] Finished setting default values for core params
182[ 0.898302] usb 1-1: new high-speed USB device number 2 using xhci_hcd
183[ 0.971948] Using Buffer DMA mode
184[ 0.971966] Periodic Transfer Interrupt Enhancement - disabled
185[ 0.971979] Multiprocessor Interrupt Enhancement - disabled
186[ 0.971993] OTG VER PARAM: 0, OTG VER FLAG: 0
187[ 0.972020] Dedicated Tx FIFOs mode
188[ 0.972521] WARN::dwc_otg_hcd_init:1045: FIQ DMA bounce buffers: virt = ffffff800bac3000 dma = 0x00000000ded34000 len=9024
189[ 0.972556] FIQ FSM acceleration enabled for :
190 Non-periodic Split Transactions
191 Periodic Split Transactions
192 High-Speed Isochronous Endpoints
193 Interrupt/Control Split Transaction hack enabled
194[ 0.972585] dwc_otg: Microframe scheduler enabled
195[ 0.972722] WARN::hcd_init_fiq:497: MPHI regs_base at ffffff80099f5200
196[ 0.972808] dwc_otg fe980000.usb: DWC OTG Controller
197[ 0.972838] dwc_otg fe980000.usb: new USB bus registered, assigned bus number 3
198[ 0.972882] dwc_otg fe980000.usb: irq 24, io mem 0x00000000
199[ 0.972939] Init: Port Power? op_state=1
200[ 0.972951] Init: Power Port (0)
201[ 0.973210] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 4.19
202[ 0.973228] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
203[ 0.973244] usb usb3: Product: DWC OTG Controller
204[ 0.973258] usb usb3: Manufacturer: Linux 4.19.71 dwc_otg_hcd
205[ 0.973271] usb usb3: SerialNumber: fe980000.usb
206[ 0.973797] hub 3-0:1.0: USB hub found
207[ 0.973859] hub 3-0:1.0: 1 port detected
208[ 0.974502] dwc_otg: FIQ enabled
209[ 0.974511] dwc_otg: NAK holdoff enabled
210[ 0.974519] dwc_otg: FIQ split-transaction FSM enabled
211[ 0.974531] Module dwc_common_port init
212[ 0.974833] usbcore: registered new interface driver usb-storage
213[ 0.975019] mousedev: PS/2 mouse device common for all mice
214[ 0.976369] bcm2835-wdt bcm2835-wdt: Broadcom BCM2835 watchdog timer
215[ 0.976580] bcm2835-cpufreq: min=600000 max=1500000
216[ 0.977234] sdhci: Secure Digital Host Controller Interface driver
217[ 0.977247] sdhci: Copyright(c) Pierre Ossman
218[ 0.977642] mmc-bcm2835 fe300000.mmcnr: could not get clk, deferring probe
219[ 0.978024] sdhci-pltfm: SDHCI platform and OF driver helper
220[ 0.981186] ledtrig-cpu: registered to indicate activity on CPUs
221[ 0.981252] hidraw: raw HID events driver (C) Jiri Kosina
222[ 0.981325] usbcore: registered new interface driver usbhid
223[ 0.981330] usbhid: USB HID core driver
224[ 0.981904] Initializing XFRM netlink socket
225[ 0.982147] NET: Registered protocol family 10
226[ 0.982709] Segment Routing with IPv6
227[ 0.982757] NET: Registered protocol family 17
228[ 0.982781] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this.
229[ 0.982823] Key type dns_resolver registered
230[ 0.983200] registered taskstats version 1
231[ 0.983212] Loading compiled-in X.509 certificates
232[ 0.986614] uart-pl011 fe201000.serial: cts_event_workaround enabled
233[ 0.986672] fe201000.serial: ttyAMA0 at MMIO 0xfe201000 (irq = 19, base_baud = 0) is a PL011 rev2
234[ 0.988719] bcm2835-power bcm2835-power: Broadcom BCM2835 power domains driver
235[ 0.989257] brcmstb_thermal fd5d2200.thermal: registered AVS TMON of-sensor driver
236[ 0.989533] mmc-bcm2835 fe300000.mmcnr: mmc_debug:0 mmc_debug2:0
237[ 0.989540] mmc-bcm2835 fe300000.mmcnr: DMA channel allocated
238[ 1.015472] sdhci-iproc fe340000.emmc2: Linked as a consumer to regulator.1
239[ 1.035511] mmc1: queuing unknown CIS tuple 0x80 (2 bytes)
240[ 1.037142] mmc1: queuing unknown CIS tuple 0x80 (3 bytes)
241[ 1.038773] mmc1: queuing unknown CIS tuple 0x80 (3 bytes)
242[ 1.041680] mmc1: queuing unknown CIS tuple 0x80 (7 bytes)
243[ 1.043307] mmc1: queuing unknown CIS tuple 0x80 (3 bytes)
244[ 1.047357] mmc0: SDHCI controller on fe340000.emmc2 [fe340000.emmc2] using ADMA
245[ 1.048952] usb 1-1: New USB device found, idVendor=2109, idProduct=3431, bcdDevice= 4.20
246[ 1.048972] usb 1-1: New USB device strings: Mfr=0, Product=1, SerialNumber=0
247[ 1.048989] usb 1-1: Product: USB2.0 Hub
248[ 1.049673] of_cfs_init
249[ 1.049791] of_cfs_init: OK
250[ 1.050159] Warning: unable to open an initial console.
251[ 1.050924] hub 1-1:1.0: USB hub found
252[ 1.051223] hub 1-1:1.0: 4 ports detected
253[ 1.062706] Freeing unused kernel memory: 9920K
254[ 1.062802] Run /init as init process
255[ 1.088386] random: fast init done
256[ 1.106565] mmc1: new high speed SDIO card at address 0001
257[ 1.149035] mmc0: new ultra high speed DDR50 SDHC card at address aaaa
258[ 1.150119] mmcblk0: mmc0:aaaa SB32G 29.7 GiB
259[ 1.157329] mmcblk0: p1 p2 p3 p4 < p5 p6 >
260[ 1.251293] udevd[275]: Starting version 241-166-g511646b+
261[ 1.253665] udevd[276]: Specified group 'render' unknown
262[ 1.253953] udevd[276]: Specified group 'kvm' unknown
263[ 1.338556] udevd[281]: Using default interface naming scheme 'v240'.
264[ 1.339067] udevd[281]: link_config: autonegotiation is unset or enabled, the speed and duplex are not writable.
265[ 1.346331] usb 1-1.2: new full-speed USB device number 3 using xhci_hcd
266[ 1.349035] udevd[281]: Process '/lib/systemd/systemd-sysctl --prefix=/net/ipv4/conf/eth0 --prefix=/net/ipv4/neigh/eth0 --prefix=/net/ipv6/conf/eth0 --prefix=/net/ipv6/neigh/eth0' failed with exit code 1.
267[ 1.378983] udevd[284]: link_config: autonegotiation is unset or enabled, the speed and duplex are not writable.
268[ 1.399617] udevd[284]: Process '/lib/systemd/systemd-vconsole-setup' failed with exit code 1.
269[ 1.452799] usb 1-1.2: New USB device found, idVendor=1a86, idProduct=7523, bcdDevice= 2.63
270[ 1.452825] usb 1-1.2: New USB device strings: Mfr=0, Product=2, SerialNumber=0
271[ 1.452842] usb 1-1.2: Product: USB2.0-Serial
272[ 1.524320] udevd[299]: Process '/lib/udev/resin_update_state_probe /dev/mmcblk0p2' failed with exit code 1.
273[ 1.527119] udevd[298]: Process '/lib/udev/resin_update_state_probe /dev/mmcblk0p3' failed with exit code 1.
274[ 1.542276] usb 1-1.3: new high-speed USB device number 4 using xhci_hcd
275[ 1.709482] usb 1-1.3: New USB device found, idVendor=05a3, idProduct=0144, bcdDevice= 0.06
276[ 1.709502] usb 1-1.3: New USB device strings: Mfr=1, Product=4, SerialNumber=3
277[ 1.709519] usb 1-1.3: Product: Global Shutter Camera
278[ 1.709534] usb 1-1.3: Manufacturer: Global Shutter Camera
279[ 1.709548] usb 1-1.3: SerialNumber: 2019.05.28.01
280[ 1.802313] usb 1-1.4: new high-speed USB device number 5 using xhci_hcd
281[ 1.970058] usb 1-1.4: New USB device found, idVendor=05a3, idProduct=0144, bcdDevice= 0.06
282[ 1.970077] usb 1-1.4: New USB device strings: Mfr=1, Product=4, SerialNumber=3
283[ 1.970092] usb 1-1.4: Product: Global Shutter Camera
284[ 1.970106] usb 1-1.4: Manufacturer: Global Shutter Camera
285[ 1.970119] usb 1-1.4: SerialNumber: 2019.05.28.01
286[ 2.040002] CP437: Invalid argument
287[ 2.080924] fsck.fat 4.1 (2017-01-24)
288 /dev/disk/by-label/resin-boot: 164 files, 16864/80628 clusters
289[ 2.087588] resin-rootA: clean, 5814/39936 files, 298230/319488 blocks
290
291[ 2.369465] resin-rootB: recovering journal
292[ 3.977936] resin-rootB: clean, 5861/39936 files, 309725/319488 blocks
293
294[ 4.268552] resin-state: clean, 68/5136 files, 1904/20480 blocks
295
296[ 4.720015] mmcblk0: p1 p2 p3 p4 < p5 p6 >
297[ 5.792865] EXT4-fs (mmcblk0p3): mounted filesystem with ordered data mode. Opts: (null)
298[ 5.958251] EXT4-fs (mmcblk0p5): mounted filesystem with ordered data mode. Opts: (null)
299[ 6.003347] udevd: 6 output lines suppressed due to ratelimiting
300[ 6.014865] switch_root: can't open '/dev/console': No such device
301[ 6.417593] EXT4-fs (mmcblk0p3): re-mounted. Opts: (null)
302[ 6.655146] systemd[1]: System time before build time, advancing clock.
303[ 6.736104] systemd[1]: File /lib/systemd/system/systemd-journald.service:12 configures an IP firewall (IPAddressDeny=any), but the local system does not support BPF/cgroup based firewalling.
304[ 6.736139] systemd[1]: Proceeding WITHOUT firewalling in effect! (This warning is only shown for the first loaded unit using IP firewalling.)
305[ 6.824747] systemd[1]: /lib/systemd/system/chronyd.service:9: PIDFile= references path below legacy directory /var/run/, updating /var/run/chrony/chronyd.pid \xe2\x86\x92 /run/chrony/chronyd.pid; please update the unit file accordingly.
306[ 6.889940] random: systemd: uninitialized urandom read (16 bytes read)
307[ 6.892747] random: systemd: uninitialized urandom read (16 bytes read)
308[ 6.894405] random: systemd: uninitialized urandom read (16 bytes read)
309[ 9.971042] EXT4-fs (mmcblk0p6): mounted filesystem with ordered data mode. Opts: (null)
310[ 10.361556] vchiq: module is from the staging directory, the quality is unknown, you have been warned.
311[ 10.368781] vchiq: vchiq_init_state: slot_zero = (____ptrval____), is_master = 0
312[ 10.438635] snd_bcm2835: module is from the staging directory, the quality is unknown, you have been warned.
313[ 10.443465] bcm2835_audio soc:audio: card created with 8 channels
314[ 10.445951] [drm] Initialized v3d 1.0.0 20180419 for fec00000.v3d on minor 0
315[ 10.516056] [drm] No displays found. Consider forcing hotplug if HDMI is attached
316[ 10.516103] vc4-drm soc:gpu: bound fe600000.firmwarekms (ops vc4_fkms_ops [vc4])
317[ 10.516866] [drm] Initialized vc4 0.0.0 20140616 for soc:gpu on minor 1
318[ 10.516877] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
319[ 10.516882] [drm] No driver support for vblank timestamp query.
320[ 10.516887] [drm] Setting vblank_disable_immediate to false because get_vblank_timestamp == NULL
321[ 10.527450] cfg80211: Loading compiled-in X.509 certificates for regulatory database
322[ 10.549048] media: Linux media interface: v0.10
323[ 10.578509] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
324[ 10.591115] platform regulatory.0: Direct firmware load for regulatory.db failed with error -2
325[ 10.591131] cfg80211: failed to load regulatory.db
326[ 10.597204] videodev: Linux video capture interface: v2.00
327[ 10.606478] usbcore: registered new interface driver usbserial_generic
328[ 10.606517] usbserial: USB Serial support registered for generic
329[ 10.617954] vc_sm_cma: module is from the staging directory, the quality is unknown, you have been warned.
330[ 10.619773] bcm2835_vc_sm_cma_probe: Videocore shared memory driver
331[ 10.619788] [vc_sm_connected_init]: start
332[ 10.619974] vc_sm_cma_vchi_init: failed to open VCHI service (-1)
333[ 10.619979] [vc_sm_connected_init]: failed to initialize shared memory service
334[ 10.635040] usbcore: registered new interface driver ch341
335[ 10.635077] usbserial: USB Serial support registered for ch341-uart
336[ 10.635132] ch341 1-1.2:1.0: ch341-uart converter detected
337[ 10.637253] brcmfmac: F1 signature read @0x18000000=0x15264345
338[ 10.644855] brcmfmac: brcmf_fw_alloc_request: using brcm/brcmfmac43455-sdio for chip BCM4345/6
339[ 10.645267] usbcore: registered new interface driver brcmfmac
340[ 10.648177] usb 1-1.2: ch341-uart converter now attached to ttyUSB0
341[ 10.690312] uvcvideo: Found UVC 1.00 device Global Shutter Camera (05a3:0144)
342[ 10.698320] bcm2835_mmal_vchiq: module is from the staging directory, the quality is unknown, you have been warned.
343[ 10.721409] bcm2835_v4l2: module is from the staging directory, the quality is unknown, you have been warned.
344[ 10.724177] bcm2835_mmal_vchiq: Failed to open VCHI service connection (status=-1)
345[ 10.778067] uvcvideo 1-1.3:1.0: Entity type for entity Extension 4 was not initialized!
346[ 10.778086] uvcvideo 1-1.3:1.0: Entity type for entity Extension 3 was not initialized!
347[ 10.778094] uvcvideo 1-1.3:1.0: Entity type for entity Processing 2 was not initialized!
348[ 10.778102] uvcvideo 1-1.3:1.0: Entity type for entity Camera 1 was not initialized!
349[ 10.780613] input: Global Shutter Camera: Global S as /devices/platform/scb/fd500000.pcie/pci0000:00/0000:00:00.0/0000:01:00.0/usb1/1-1/1-1.3/1-1.3:1.0/input/input0
350[ 10.785694] uvcvideo: Found UVC 1.00 device Global Shutter Camera (05a3:0144)
351[ 10.875028] uvcvideo 1-1.4:1.0: Entity type for entity Extension 4 was not initialized!
352[ 10.875040] uvcvideo 1-1.4:1.0: Entity type for entity Extension 3 was not initialized!
353[ 10.875048] uvcvideo 1-1.4:1.0: Entity type for entity Processing 2 was not initialized!
354[ 10.875055] uvcvideo 1-1.4:1.0: Entity type for entity Camera 1 was not initialized!
355[ 10.875239] input: Global Shutter Camera: Global S as /devices/platform/scb/fd500000.pcie/pci0000:00/0000:00:00.0/0000:01:00.0/usb1/1-1/1-1.4/1-1.4:1.0/input/input1
356[ 10.875323] usbcore: registered new interface driver uvcvideo
357[ 10.875329] USB Video Class driver (1.1.1)
358[ 10.884549] brcmfmac: brcmf_fw_alloc_request: using brcm/brcmfmac43455-sdio for chip BCM4345/6
359[ 10.897953] brcmfmac: brcmf_c_preinit_dcmds: Firmware: BCM4345/6 wl0: May 2 2019 02:46:17 version 7.45.189 (r714228 CY) FWID 01-e1db26e2
360[ 11.169970] uart-pl011 fe201000.serial: no DMA platform data
361[ 11.921895] systemd-journald[507]: Received request to flush runtime journal from PID 1
362[ 12.307235] systemd-journald[507]: File /var/log/journal/aa0234e128324655b78fee09705596c1/system.journal corrupted or uncleanly shut down, renaming and replacing.
363[ 13.189192] random: crng init done
364[ 13.189202] random: 7 urandom warning(s) missed due to ratelimiting
365[ 16.907113] i2c /dev entries driver
366[ 17.286766] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
367[ 17.286960] bcmgenet: Skipping UMAC reset
368[ 17.359280] bcmgenet fd580000.genet: configuring instance for external RGMII (no delay)
369[ 17.359947] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
370[ 17.380916] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
371[ 17.407847] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
372[ 17.407880] brcmfmac: power management disabled
373[ 17.752930] Bluetooth: Core ver 2.22
374[ 17.752982] NET: Registered protocol family 31
375[ 17.752988] Bluetooth: HCI device and connection manager initialized
376[ 17.753002] Bluetooth: HCI socket layer initialized
377[ 17.753011] Bluetooth: L2CAP socket layer initialized
378[ 17.753032] Bluetooth: SCO socket layer initialized
379[ 17.768702] Bluetooth: HCI UART driver ver 2.3
380[ 17.768717] Bluetooth: HCI UART protocol H4 registered
381[ 17.768769] Bluetooth: HCI UART protocol Three-wire (H5) registered
382[ 17.768900] Bluetooth: HCI UART protocol Broadcom registered
383[ 17.926694] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
384[ 17.926720] brcmfmac: power management disabled
385[ 18.085949] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
386[ 18.085965] Bluetooth: BNEP filters: protocol multicast
387[ 18.085979] Bluetooth: BNEP socket layer initialized
388[ 18.123720] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
389[ 18.366533] bcmgenet fd580000.genet eth0: Link is Down
390[ 21.226349] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
391[ 21.226368] brcmfmac: power management disabled
392[ 21.851329] Bridge firewalling registered
393[ 22.199209] IPv6: ADDRCONF(NETDEV_UP): balena0: link is not ready
394[ 22.309379] IPv6: ADDRCONF(NETDEV_UP): supervisor0: link is not ready
395[ 22.439786] IPv6: ADDRCONF(NETDEV_UP): br-e31971ecf574: link is not ready
396[ 26.384114] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
397[ 330.491329] uvcvideo: Failed to query (GET_CUR) UVC control 13 on unit 1: -32 (exp. 8).
398[ 330.498601] uvcvideo: Failed to query (GET_CUR) UVC control 13 on unit 1: -32 (exp. 8).
399[ 330.505884] uvcvideo: Failed to query (GET_CUR) UVC control 11 on unit 1: -32 (exp. 2).
400[ 330.584307] uvcvideo: Failed to query (GET_CUR) UVC control 13 on unit 1: -32 (exp. 8).
401[ 330.591680] uvcvideo: Failed to query (GET_CUR) UVC control 13 on unit 1: -32 (exp. 8).
402[ 330.598960] uvcvideo: Failed to query (GET_CUR) UVC control 11 on unit 1: -32 (exp. 2).
403[ 344.062007] uvcvideo: Failed to query (GET_CUR) UVC control 13 on unit 1: -32 (exp. 8).
404[ 344.069244] uvcvideo: Failed to query (GET_CUR) UVC control 13 on unit 1: -32 (exp. 8).
405[ 344.076530] uvcvideo: Failed to query (GET_CUR) UVC control 11 on unit 1: -32 (exp. 2).
406[ 344.154155] uvcvideo: Failed to query (GET_CUR) UVC control 13 on unit 1: -32 (exp. 8).
407[ 344.161512] uvcvideo: Failed to query (GET_CUR) UVC control 13 on unit 1: -32 (exp. 8).
408[ 344.168783] uvcvideo: Failed to query (GET_CUR) UVC control 11 on unit 1: -32 (exp. 2).
409[ 7322.801230] uvcvideo: Failed to query (GET_CUR) UVC control 13 on unit 1: -32 (exp. 8).
410[ 7322.808525] uvcvideo: Failed to query (GET_CUR) UVC control 13 on unit 1: -32 (exp. 8).
411[ 7322.815835] uvcvideo: Failed to query (GET_CUR) UVC control 11 on unit 1: -32 (exp. 2).
412[ 7322.896308] uvcvideo: Failed to query (GET_CUR) UVC control 13 on unit 1: -32 (exp. 8).
413[ 7322.903667] uvcvideo: Failed to query (GET_CUR) UVC control 13 on unit 1: -32 (exp. 8).
414[ 7322.910917] uvcvideo: Failed to query (GET_CUR) UVC control 11 on unit 1: -32 (exp. 2).
415[205398.175663] uvcvideo: Failed to query (GET_CUR) UVC control 13 on unit 1: -32 (exp. 8).
416[205398.182975] uvcvideo: Failed to query (GET_CUR) UVC control 13 on unit 1: -32 (exp. 8).
417[205398.190261] uvcvideo: Failed to query (GET_CUR) UVC control 11 on unit 1: -32 (exp. 2).
418[205398.268295] uvcvideo: Failed to query (GET_CUR) UVC control 13 on unit 1: -32 (exp. 8).
419[205398.275669] uvcvideo: Failed to query (GET_CUR) UVC control 13 on unit 1: -32 (exp. 8).
420[205398.283005] uvcvideo: Failed to query (GET_CUR) UVC control 11 on unit 1: -32 (exp. 2).
421[205450.657272] uvcvideo: Failed to query (GET_CUR) UVC control 13 on unit 1: -32 (exp. 8).
422[205450.664596] uvcvideo: Failed to query (GET_CUR) UVC control 13 on unit 1: -32 (exp. 8).
423[205450.671851] uvcvideo: Failed to query (GET_CUR) UVC control 11 on unit 1: -32 (exp. 2).
424[205450.752495] uvcvideo: Failed to query (GET_CUR) UVC control 13 on unit 1: -32 (exp. 8).
425[205450.759812] uvcvideo: Failed to query (GET_CUR) UVC control 13 on unit 1: -32 (exp. 8).
426[205450.767036] uvcvideo: Failed to query (GET_CUR) UVC control 11 on unit 1: -32 (exp. 2).
427[249240.292900] uvcvideo: Failed to query (GET_CUR) UVC control 13 on unit 1: -32 (exp. 8).
428[249240.300265] uvcvideo: Failed to query (GET_CUR) UVC control 13 on unit 1: -32 (exp. 8).
429[249240.307590] uvcvideo: Failed to query (GET_CUR) UVC control 11 on unit 1: -32 (exp. 2).
430[249240.385163] uvcvideo: Failed to query (GET_CUR) UVC control 13 on unit 1: -32 (exp. 8).
431[249240.393127] uvcvideo: Failed to query (GET_CUR) UVC control 13 on unit 1: -32 (exp. 8).
432[249240.400540] uvcvideo: Failed to query (GET_CUR) UVC control 11 on unit 1: -32 (exp. 2).
433[249394.380201] uvcvideo: Failed to query (GET_CUR) UVC control 13 on unit 1: -32 (exp. 8).
434[249394.387484] uvcvideo: Failed to query (GET_CUR) UVC control 13 on unit 1: -32 (exp. 8).
435[249394.394777] uvcvideo: Failed to query (GET_CUR) UVC control 11 on unit 1: -32 (exp. 2).
436[249394.472165] uvcvideo: Failed to query (GET_CUR) UVC control 13 on unit 1: -32 (exp. 8).
437[249394.480267] uvcvideo: Failed to query (GET_CUR) UVC control 13 on unit 1: -32 (exp. 8).
438[249394.487710] uvcvideo: Failed to query (GET_CUR) UVC control 11 on unit 1: -32 (exp. 2).
439root@1f2edde:~#