· 6 years ago · Apr 11, 2019, 04:36 AM
1[0] bldr_log_init: bldr_log_base=0x83600000, bldr_log_size=458752
2B - 694668 - boot_elf_load_and_verify_image: boot_auth_compute_verify_hash for 9:0
3D - 105042 - APPSBL Image Loaded, Delta - (2498960 Bytes)
4B - 694881 - SBL1, End
5D - 609176 - SBL1, Delta
6S - Flash Throughput, 129000 KB/s (4729782 Bytes, 36399 us)
7S - DDR Frequency, 1017 MHz
8
9B - 441823 - 8996 Pro v1.x detected, Max frequency = 1.8 GHz
10B - 447435 - ddr_initialize_device, Delta
11B - 447435 - DDR ID, Rank 0, Rank 1, 0x6, 0x400, 0x400
12B - 447618 - Basic DDR tests done
13B - 509960 - clock_init, Start
14D - 244 - clock_init, Delta
15B - 510204 - HTC RPM DATARAM UPDATE info: Done
16B - 510326 - Image Load, Start
17B - 513742 - boot_elf_load_and_verify_image: boot_auth_compute_verify_hash for 5:0
18D - 3477 - QSEE Dev Config Image Loaded, Delta - (46232 Bytes)
19B - 514108 - Image Load, Start
20B - 516243 - boot_elf_load_and_verify_image: boot_auth_compute_verify_hash for 512:0
21D - 2165 - APDP Image Loaded, Delta - (7696 Bytes)
22B - 516273 - Image Load, Start
23B - 566934 - boot_elf_load_and_verify_image: boot_auth_compute_verify_hash for 7:0
24D - 50722 - QSEE Image Loaded, Delta - (1648640 Bytes)
25B - 567025 - Image Load, Start
26D - 244 - SEC Image Loaded, Delta - (4096 Bytes)
27B - 567696 - 0x1310 = 0x4
28B - 567696 - is_above_vbat_weak = 1, pon_reasons (with usb_in checked) = 0x20031
29B - 567788 - sbl1_efs_handle_cookies, Start
30D - 61 - sbl1_efs_handle_cookies, Delta
31B - 567910 - Image Load, Start
32B - 578676 - boot_elf_load_and_verify_image: boot_auth_compute_verify_hash for 21:0
33D - 10888 - QHEE Image Loaded, Delta - (258280 Bytes)
34B - 578798 - Image Load, Start
35B - 589473 - boot_elf_load_and_verify_image: boot_auth_compute_verify_hash for 10:0
36D - 10706 - RPM Image Loaded, Delta - (224104 Bytes)
37B - 589534 - Image Load, Start
38D - 0 - STI Image Loaded, Delta - (0 Bytes)
39B - 589748 - Image Load, Start
40driver_init, Delta
41B - 437156 - pm_sbl_chg
42 ******************** [ START SECOND] ********************
43 B - 2410994 - Image Load, Start
44B - 2461685 - boot_elf_load_and_verify_image: boot_auth_compute_verify_hash for 7:0
45D - 50752 - QSEE Image Loaded, Delta - (1648640 Bytes)
46B - 2461777 - Image Load, Start
47D - 244 - SEC Image Loaded, Delta - (4096 Bytes)
48B - 2462448 - 0x1310 = 0x4
49B - 2462448 - is_above_vbat_weak = 1, pon_reasons (with usb_in checked) = 0x20031
50B - 2462539 - sbl1_efs_handle_cookies, Start
51D - 91 - sbl1_efs_handle_cookies, Delta
52B - 2462661 - Image Load, Start
53B - 2473489 - boot_elf_load_and_verify_image: boot_auth_compute_verify_hash for 21:0
54D - 10919 - QHEE Image Loaded, Delta - (258280 Bytes)
55B - 2473611 - Image Load, Start
56B - 2484286 - boot_elf_load_and_verify_image: boot_auth_compute_verify_hash for 10:0
57D - 10705 - RPM Image Loaded, Delta - (224104 Bytes)
58B - 2484316 - Image Load, Start
59D - 31 - STI Image Loaded, Delta - (0 Bytes)
60B - 2484560 - Image Load, Start
61B - 2589480 - boot_elf_load_and_verify_image: boot_auth_compute_verify_hash for 9:0
62D - 105042 - APPSBL Image Loaded, Delta - (2498960 Bytes)
63B - 2589694 - SBL1, End
64D - 2503867 - SBL1, Delta
65S - Flash Throughput, 130000 KB/s (4729782 Bytes, 36371 us)
66S - DDR Frequency, 1017 MHz
67N -> 0x83e00000, from addr=0x86000000, size=0x00200000
68B - 567330 - htc_ramdump_backup: backup OCIMEM.BIN -> 0x83c90000, from addr=0x06680000, size=0x00040000
69B - 569038 - htc_ramdump_backup: backup HYP.BIN -> 0xd0000000, from addr=0x85800000, size=0x00600000
70B - 658129 - htc_ramdump_backup: backup TZ.BIN -> 0xd0600000, from addr=0x86200000, size=0x00400000
71B - 715042 - htc_ramdump_backup: backup TZ_APPS.BIN -> 0xd0a00000, from addr=0x86600000, size=0x02200000
72B - 1563613 - htc_ramdump_backup: backup PIMEM.BIN -> 0xd4400000, from addr=0x0b000000, size=0x01000000
73B - 1702815 - IPA dumps not added for chip v1
74B - 1702815 - htc_ramdump_backup: backup HYP_PT.BIN -> 0xd2c00000, from addr=0x17e800000, size=0x01800000
75
76[0] welcome to lk
77
78[10] platform_init()
79[10] CPU revision: 1.1
80[10] ddr_vendor is Hynix(0x6)
81[10] target_init()
82[10] check_reboot_mode: restart_reason: 0x00000000
83[10] check_reboot_mode: restart_reason: 0x00000000
84[10] target_init(): abnrst_subsys_skip: 0
85[10] RPM GLink Init
86[10] Opening RPM Glink Port success
87[10] Opening SSR Glink Port success
88[10] Glink Connection between APPS and RPM established
89[10] Glink Connection between APPS and RPM established
90[40] UFS init success
91[40] htc_mmc_read_alignment: 'misc', transform (0x9800, 2048) -> (0x9000, 4096)
92[40] reboot_block.reason = 00000000
93[40] htc_mmc_write_alignment: 'misc', transform (0x9800, 2048) -> (0x9000)
94[40] check_reboot_mode: restart_reason: 0x00000000
95[40] pon reason: 0x21, 0x20031
96[40] pm8x41_get_is_cold_boot: Warm boot
97[40] Qseecom Init Done in Appsbl version is 0x1000000
98[40] secure app region addr=0x86600000 size=0x2200000[50] TZ App region notif returned with status:0 addr:86600000 size:35651584
99[50] TZ App log region register returned with status:0 addr:83a81000 size:4096
100[50] Qseecom TZ Init Done in Appsbl
101[110] Loading (cmnlib32_a) done
102[110] qseecom_start_app: Loading app keymaster_a for the first time'
103[130] <8>keymaster: "\"KEYMASTER Init \""
104[130] qseecom_start_app: Loading app bootlocker_a for the first time'
105[150] <8>bootlocker: "bootlocker App Init "
106[150] <8>bootlocker: "Version: 0.4"
107[160] <8>bootlocker: "nResult: [0], reboot_count: [0], unlock_bl_reboot_count: [0]"
108[160] read_device_info_rpmb
109[160] LK SEC APP Handle: 0x1
110[160] <8>keymaster: "\"cmd_id=KEYMASTER_READ_KM_DEVICE_STATE\""
111[160] <8>keymaster: "\"open_add_km_partition status:0\""
112[160] <8>keymaster: "\"secboot device : 1\""
113[170] <8>keymaster: "\"cmd_id=KEYMASTER_READ_KM_DEVICE_STATE done with ret: 0 time taken: 5\""
114[170] htc_read_device_info: mmc ANDROID-BOOT!,rpmb ANDROID-BOOT!
115[170] htc_read_device_info: is_unlocked= 1 verity_mode = enforcing
116[170] partition_get_index: err 2 on config
117[170] pm8x41_read_time(): RTC_WR_EN_CTL1: 0x80
118[170] pm8x41_read_bytes: value: 0x79
119[170] pm8x41_read_bytes: value: 0x71
120[170] pm8x41_read_bytes: value: 0xfc
121[170] pm8x41_read_bytes: value: 0x3
122[170] val0:121 val1:113 val2:252 val3:3
123[170] pm8x41_read_time: secs = 66875769, h::m:s == 0::36::9, d/m/y = 14/1/72
124[170] record_rtc_start_time: secs = 66875769, h::m:s == 0::36::9, d/m/y = 14/1/72
125[170] ### LK Start time: 1972-02-14 00:36:09
126[170] htc_mmc_read_alignment: 'mfg', transform (0xa000, 2048) -> (0xa000, 4096)
127[170] htc_mmc_read_alignment: 'mfg', transform (0xd000, 2048) -> (0xd000, 4096)
128[170] htc_mmc_read_alignment: 'mfg', transform (0xd800, 2048) -> (0xd000, 4096)
129[170] htc_mmc_read_alignment: 'mfg', transform (0xe000, 2048) -> (0xe000, 4096)
130[170] htc_mmc_read_alignment: 'mfg', transform (0x12000, 2048) -> (0x12000, 4096)
131[170] htc_mmc_read_alignment: 'mfg', transform (0x14800, 2048) -> (0x14000, 4096)
132[170] device_need_halt(0)
133[170] Set ps_hold reset type as PM:warm reset [170] PMI: warm reset
134[170] check_reboot_mode: restart_reason: 0x00000000
135[170] bootflow: No key event
136[170] check_reboot_mode: restart_reason: 0x00000000
137[170] bootflow: No key event
138[170] pm8x41_get_is_cold_boot: Warm boot
139[170] check_reboot_mode: restart_reason: 0x00000000
140[170] target_pause_for_battery_charge : pon_reason is 49 cold_boot:0
141[170] target_pause_for_battery_charge : GCC_RESET_STATUS(0x66BF028): 0x3
142[170] bootflow, default => bootmode = normal
143[170] setting_battery_stored_data_check: magic_num=0, stored_soc=0, currtime=0, batt_temp=252645135, total_level_raw=0, overheat_55_sec=0, batt_first_use_time=0, batt_cycle_checksum=0
144[170] Return value from recv_data: 14
145[180] Return value from recv_data: 14
146[190] Return value from recv_data: 14
147[220] force_clear_ramdump_flag_if_security_on , skip force erase ramdump enable flag
148[220] htc_secure_board_info_init: htc_secure_board_info_init
149[220] allocate_secure_buffer_for_radio: ret = 0
150[220] htc_radio_share_mem_init: htc_radio_share_mem_init
151[220] [smem]htc_radio_share_mem_init: RCMS NAME=, SKU_NAME=, version=0x20140901, size=2048, boot_mode=0, radioflag=0x8, radioflagex1=0x0, radioflagex2=0x0
152[220] allocate_secure_buffer_for_radio: ret = 0
153[220] usb_typec_init : pcbid = 0x80, bomid = 0x4
154[220] target_fingerprint_init
155[220] target_get_fingerprint_id: status:1
156[220] Multi Slot boot is supported
157[220] Not able to search the panel:
158[230] Panel ID (id) = (0)
159[230] 5.5" M1_SAMSUNG_S6E3HA3_WQHD_DUALDSI_CMD_PANEL
160[230] init_panel_data() Samsung on size:14, off size:2
161[230] panel_operating_mode=0xb
162[230] framebuffer addr =0xC0000000
163[230] power on M1_SAMSUNG_COMMAND panel
164[230] Enable LDO 29
165[230] Return value from recv_data: 14
166[240] Return value from recv_data: 14
167[260] Config MIPI_CMD_PANEL.
168[280] mdss_dsi_read_display_id : Read display id =0x00210100 (0x00210100)
169[470] Turn on MIPI_CMD_PANEL.
170[470] imgver: bootloader: version found: 8996-012001-1711291800
171[560] imgver: baseband: version found: 8996-130091-1802061512
172[560] pmi8994_get_batt_voltage_pmic_reg : voltage raw data, data=0x71
173[560] check_reboot_mode: restart_reason: 0x00000000
174[560] BATT V=4407, bootmode=0, cfg=0x8
175[560] --------------------------
176[560] FG Check ALG start.
177[560] alg_sts: 0x21.
178[560] ima_opr_sts: 0 alg_sts: 21 count=0
179[560] ALG check ok
180[560] --------------------------
181[560] 0x13f2: 7
182[560] pmi8994_is_charger_usbin_suspend: 0x807=0x0, 0x1242=0x0, 0x1309=0x22, 0x1310=0x4, 0x1340=0x1, 0x1610=0x2
183[560] pm8x41_get_is_cold_boot: Warm boot
184[560] check_reboot_mode: restart_reason: 0x00000000
185[560] target_pause_for_battery_charge : pon_reason is 49 cold_boot:0
186[560] target_pause_for_battery_charge : GCC_RESET_STATUS(0x66BF028): 0x3
187[560] LED off !!
188[560] [multislot] BOOT_LUN = 1
189[560] [multislot] attribute:boot_a=000000a7
190[560] [multislot] attribute:boot_b=0000003b
191[560] pm8x41_get_is_cold_boot: Warm boot
192[560] [DISP] Trigger updating for MIPI_CMD_PANEL.
193[580] Backlight enable = 1
194[580] [DISP] Trigger updating for MIPI_CMD_PANEL.
195[4610] [DISP] Trigger updating for MIPI_CMD_PANEL.
196[4640] Backlight enable = 1
197[4640] partition_get_index: err 2 on config
198[4640] aboot_init: check_hard_reboot_mode=0x00
199[4640] enter normal mode
200[4640] init ptn_offset: 1536
201[4640] array_size: 18
202[4640] region name: OCIMEM.BIN
203[4640] ramdum_e_hdrs->ptn_offset: 1536
204[4640] region name: RST_STAT.BIN
205[4640] ramdum_e_hdrs->ptn_offset: 263680
206[4640] region name: OOPS.BIN
207[4640] ramdum_e_hdrs->ptn_offset: 264192
208[4640] region name: RAMOOPS.BIN
209[4640] ramdum_e_hdrs->ptn_offset: 526336
210[4640] region name: PMSG.BIN
211[4640] ramdum_e_hdrs->ptn_offset: 1050624
212[4640] region name: CODERAM.BIN
213[4640] ramdum_e_hdrs->ptn_offset: 1312768
214[4640] region name: DATARAM.BIN
215[4640] ramdum_e_hdrs->ptn_offset: 1476608
216[4640] region name: MSGRAM.BIN
217[4640] ramdum_e_hdrs->ptn_offset: 1558528
218[4640] region name: HB_LOG.BIN
219[4640] ramdum_e_hdrs->ptn_offset: 1591296
220[4640] region name: HB_LAST.BIN
221[4640] ramdum_e_hdrs->ptn_offset: 2050048
222[4640] region name: SMEM.BIN
223[4640] ramdum_e_hdrs->ptn_offset: 2508800
224[4640] region name: IPA_IRAM.BIN
225[4640] ramdum_e_hdrs->ptn_offset: 4605952
226[4640] region name: IPA_DRAM.BIN
227[4640] ramdum_e_hdrs->ptn_offset: 4622336
228[4640] region name: IPA_SRAM.BIN
229[4640] ramdum_e_hdrs->ptn_offset: 4638720
230[4640] region name: IPA_HRAM.BIN
231[4640] ramdum_e_hdrs->ptn_offset: 4646912
232[4640] region name: IPA_MBOX.BIN
233[4640] ramdum_e_hdrs->ptn_offset: 4659200
234[4640] region name: RAMDUMP_MSG.txt
235[4640] region name: PMIC_PON.BIN
236[4640] ramdump_reserve2memory: restore entry OOPS.BIN to 0x83500000
237[4640] htc_mmc_read_alignment: 'ramdump', transform (0xc6800, 262144) -> (0xc6000, 266240)
238[4640] ramdump_reserve2memory: restore entry RAMOOPS.BIN to 0x83540000
239[4640] htc_mmc_read_alignment: 'ramdump', transform (0x106800, 524288) -> (0x106000, 528384)
240[4640] ramdump_reserve2memory: restore entry PMSG.BIN to 0x835c0000
241[4640] htc_mmc_read_alignment: 'ramdump', transform (0x186800, 262144) -> (0x186000, 266240)
242[4640] ramdump_reserve2memory: restore entry HB_LOG.BIN to 0x83680000
243[4640] htc_mmc_read_alignment: 'ramdump', transform (0x20a800, 458752) -> (0x20a000, 462848)
244[4650] erase_ramdump_partition: ramdump partition is erased
245[4650] [multislot] find_bootable_slot: try slot _b (unbootable=0)
246[4650] (recovery) bootable_slot =boot_a
247[4650] partition_get_index: err 2 on bootselect
248[4650] Unable to locate /bootselect partition
249[4650] boot_verifier: Device is in ORANGE boot state.
250[4650] Device is unlocked! Skipping set device status...
251[4650] Loading (recovery) image (19996672): start
252[4700] Loading (recovery) image (19996672): done
253[4700] use_signed_kernel=1, is_unlocked=1, is_tampered=0.
254[4700] Authenticating boot image (19996672): start
255[4700] boot_verifier: Device is in ORANGE boot state.
256[4700] boot_verifier: Skipping boot verification.
257[4700] boot_verifier: Device is in ORANGE boot state.
258[4700] Authenticating boot image: done return value = 0
259[4700] ERROR: check image signature = 1 check image version = 0
260[4700] Your device has been unlocked and can't be trusted.
261[4700] LK SEC APP Handle: 0x1
262[4730] <8>keymaster: "\"cmd_id=KEYMASTER_SET_ROT\""
263[4730] <8>keymaster: "\"cmd_id=KEYMASTER_SET_ROT done with ret: 0 time taken: 1\""
264[4730] [ERR] WP group is NULL or not ready
265[4730] partition_enable_wp: group 0
266[4730] partition_enable_wp: group 0 not defined
267[4730] decompressing kernel image: start
268[5190] decompressing kernel image: done
269[5190] Add DTB entry 422/00000080/0x00000000/10001/20009/10013/0/0/929a05e1/5fcf8
270[5190] Add DTB entry 422/00000080/0x00000000/10001/3/4/45/1/929a05e1/5fcf8
271[5190] Best match DTB tags 422/00000080/0x00000000/10001/20009/10013/0/0/929a05e1/5fcf8
272[5190] Using pmic info 0x20009/0x10013/0x0/0x0 for device 0x20009/0x455013/0x0/0x0
273[5220] display kernel cmdline: mdss_mdp.panel=1:dsi:0:qcom,mdss_dsi_samsung_s6e3ha3_wqhd_cmd:1:qcom,mdss_dsi_samsung_s6e3ha3_wqhd_cmd:cfg:split_dsi
274[5220] pm8x41_get_is_cold_boot: Warm boot
275[5220] htc_cmdline_update: NULL buffer or zero buffer size
276[5220] ddr_vendor is Hynix(0x6)
277[5220] chipset_ver is 1005F0E1
278[5220] chipset_ver is 1005F0E1
279[5220] HW Security has been enabled !
280[5220] Device CID is not super CID
281[5220] Device CID is not super CID
282[5220] target_get_fingerprint_id: status:1
283[5220] get_wifi_country_code: mfg_wifi 10
284[5220] wifi_country US
285[5220] get_wifi_country_code: mfg_wifi 10
286[5220] wifi_country US
287[5220] cmdline: console=ttyHSL0,115200,n8 androidboot.console=ttyHSL0 androidboot.hardware=marlin user_debug=31 ehci-hcd.park=3 lpm_levels.sleep_disabled=1 cma=32M@0-0xffffffff loop.max_part=7 androidboot.bootdevice=624000.ufshc androidboot.verifiedbootstate=ora[5220] Updating device tree: start
288[5240] Appending /chosen/misc node data into FDT
289[5240] firmware_main_version: 16-byte added
290[5240] enable_log: 64-byte added
291[5240] (setting_get_anti_rollback_1_lsb):(00000000)
292[5240] QFPROM_CORR_ANTI_ROLLBACK_1_LSB: 9-byte added
293[5240] (setting_get_anti_rollback_1_msb):(00000000)
294[5240] QFPROM_CORR_ANTI_ROLLBACK_1_MSB: 9-byte added
295[5240] (setting_get_anti_rollback_2_lsb):(00000000)
296[5250] QFPROM_CORR_ANTI_ROLLBACK_2_LSB: 9-byte added
297[5250] (setting_get_anti_rollback_2_msb):(00000000)
298[5250] QFPROM_CORR_ANTI_ROLLBACK_2_MSB: 9-byte added
299[5250] [INFO] setting_get_msm_serial: chip serial number msm_serial: a8f7a84f
300[5250] QFPROM_CORR_MSM_SERIAL_NUM: 21-byte added
301[5250] Appending /chosen/mfg node data into FDT
302[5250] skuid.bom_id: 1-byte added
303[5250] skuid.dw0: 4-byte added
304[5250] skuid.rf_id: 32-byte added
305[5250] skuid.engineer_id: 4-byte added
306[5250] skuid.pcb_id: 1-byte added
307[5270] Appending /chosen/board_info node data into FDT
308[5270] pid: 4-byte added
309[5270] Appending calibration data info FDT
310[5270] bt_flash: 6-byte added
311[5270] ps_flash: 8-byte added
312[5270] ws_flash: 4-byte added
313[5270] als_flash: 4-byte added
314[5270] gs_flash: 4-byte added
315[5270] gyro_flash: 768-byte added
316[5270] wifi_eeprom: 2048-byte added
317[5280] cam_awb: 16384-byte added
318[5280] ps_adi_flash: 11-byte added
319[5280] bs_flash: 5-byte added
320[5280] disp_flash: 64-byte added
321[5280] Appending /chosen/radio node data into FDT
322[5280] secure_flag: 4-byte added
323[5280] htc_smem_pid: 4-byte added
324[5280] htc_smem_cid: 16-byte added
325[5280] htc_smem_imei: 16-byte added
326[5280] htc_smem_imei2: 16-byte added
327[5280] htc_smem_meid: 16-byte added
328[5280] sku_id: 48-byte added
329[5280] fdt_get_wlan_ramdump_size: wlan ramdump len: 0x200000
330[5300] target_update_battery_data PLATFORM = 8996
331[5300] target_update_battery_data offset:-1
332[5300] target_update_battery_data fdt_setprop_inplace fail in magic_num,ret:-4
333[5300] WARN: Failed to update battery data
334[5300] target_update_display_data done
335[5300] Updating device tree: done
336[5300] platform_vib_delay: delay for 200 ms to ensure vibrator can be disabled
337[5420] platform_vib_delay: delay for 200 ms end
338[5420] set_imem_lock_state: state = 0
339[5420] restart_reason set to 0x776655aa
340[5420] Turn off MIPI_CMD_PANEL.
341[5420] Continuous splash enabled, keeping panel alive.
342[5420] target_uninit(): abnrst_subsys_skip: 0
343[5430] <8>keymaster: "\"cmd_id=KEYMASTER_MILESTONE_CALL\""
344[5430] <8>keymaster: "\"cmd_id=KEYMASTER_MILESTONE_CALL done with ret: 0 time taken: 1\""
345[5430] Return value from recv_data: 14
346[5450] RPM GLINK UnInit
347[5450] Qseecom De-Init Done in Appsbl
348[5450] booting linux @ 0x80080000, ramdisk @ 0x82200000 (1009768), tags/device tree @ 0x82000000
349[5450] pm8x41_read_time(): RTC_WR_EN_CTL1: 0x80
350[5450] pm8x41_read_bytes: value: 0x82
351[5450] pm8x41_read_bytes: value: 0x71
352[5450] pm8x41_read_bytes: value: 0xfc
353[5450] pm8x41_read_bytes: value: 0x3
354[5450] val0:130 val1:113 val2:252 val3:3
355[5450] pm8x41_read_time: secs = 66875778, h::m:s == 0::36::18, d/m/y = 14/1/72
356[5450] record_rtc_end_time: secs = 66875778, h::m:s == 0::36::18, d/m/y = 14/1/72
357[5450] ### LK End time: 1972-02-14 00:36:18
358[5450] ### LK delta time: 9 secs
359[5450] Jumping to kernel via monitor
360[0] bldr_log_init: bldr_log_base=0x83600000, bldr_log_size=458752
361B - 998692 - boot_elf_load_and_verify_image: boot_auth_compute_verify_hash for 9:0
362D - 109556 - APPSBL Image Loaded, Delta - (2498960 Bytes)
363B - 1005188 - SBL1, End
364D - 924791 - SBL1, Delta
365S - Flash Throughput, 130000 KB/s (4729782 Bytes, 36370 us)
366S - DDR Frequency, 1017 MHz
367
368B - 630313 - 8996 Pro v1.x detected, Max frequency = 1.8 GHz
369B - 639951 - ddr_initialize_device, Delta
370B - 640073 - DDR ID, Rank 0, Rank 1, 0x6, 0x400, 0x400
371B - 644160 - Basic DDR tests done
372B - 711321 - clock_init, Start
373D - 244 - clock_init, Delta
374B - 713242 - HTC RPM DATARAM UPDATE info: Done
375B - 716384 - Image Load, Start
376B - 724131 - boot_elf_load_and_verify_image: boot_auth_compute_verify_hash for 5:0
377D - 7777 - QSEE Dev Config Image Loaded, Delta - (46232 Bytes)
378B - 731634 - Image Load, Start
379B - 739594 - boot_elf_load_and_verify_image: boot_auth_compute_verify_hash for 512:0
380D - 8692 - APDP Image Loaded, Delta - (7696 Bytes)
381B - 748226 - Image Load, Start
382B - 803797 - boot_elf_load_and_verify_image: boot_auth_compute_verify_hash for 7:0
383D - 55662 - QSEE Image Loaded, Delta - (1648640 Bytes)
384B - 810232 - Image Load, Start
385D - 244 - SEC Image Loaded, Delta - (4096 Bytes)
386B - 818894 - 0x1310 = 0x4
387B - 823256 - is_above_vbat_weak = 1, pon_reasons (with usb_in checked) = 0xb1
388B - 826123 - sbl1_efs_handle_cookies, Start
389D - 91 - sbl1_efs_handle_cookies, Delta
390B - 837133 - Image Load, Start
391B - 852109 - boot_elf_load_and_verify_image: boot_auth_compute_verify_hash for 21:0
392D - 15098 - QHEE Image Loaded, Delta - (258280 Bytes)
393B - 858544 - Image Load, Start
394B - 874404 - boot_elf_load_and_verify_image: boot_auth_compute_verify_hash for 10:0
395D - 15891 - RPM Image Loaded, Delta - (224104 Bytes)
396B - 880870 - Image Load, Start
397D - 5185 - STI Image Loaded, Delta - (0 Bytes)
398B - 889227 - Image Load, Start
399 pm_driver_init, Delta
400B - 557997 - pm_sbl_ch
401 ******************** [ START SECOND] ********************
402 B - 694668 - boot_elf_load_and_verify_image: boot_auth_compute_verify_hash for 9:0
403D - 105042 - APPSBL Image Loaded, Delta - (2498960 Bytes)
404B - 694881 - SBL1, End
405D - 609176 - SBL1, Delta
406S - Flash Throughput, 129000 KB/s (4729782 Bytes, 36399 us)
407S - DDR Frequency, 1017 MHz
408
409B - 441823 - 8996 Pro v1.x detected, Max frequency = 1.8 GHz
410B - 447435 - ddr_initialize_device, Delta
411B - 447435 - DDR ID, Rank 0, Rank 1, 0x6, 0x400, 0x400
412B - 447618 - Basic DDR tests done
413B - 509960 - clock_init, Start
414D - 244 - clock_init, Delta
415B - 510204 - HTC RPM DATARAM UPDATE info: Done
416B - 510326 - Image Load, Start
417B - 513742 - boot_elf_load_and_verify_image: boot_auth_compute_verify_hash for 5:0
418D - 3477 - QSEE Dev Config Image Loaded, Delta - (46232 Bytes)
419B - 514108 - Image Load, Start
420B - 516243 - boot_elf_load_and_verify_image: boot_auth_compute_verify_hash for 512:0
421D - 2165 - APDP Image Loaded, Delta - (7696 Bytes)
422B - 516273 - Image Load, Start
423B - 566934 - boot_elf_load_and_verify_image: boot_auth_compute_verify_hash for 7:0
424D - 50722 - QSEE Image Loaded, Delta - (1648640 Bytes)
425B - 567025 - Image Load, Start
426D - 244 - SEC Image Loaded, Delta - (4096 Bytes)
427B - 567696 - 0x1310 = 0x4
428B - 567696 - is_above_vbat_weak = 1, pon_reasons (with usb_in checked) = 0x20031
429B - 567788 - sbl1_efs_handle_cookies, Start
430D - 61 - sbl1_efs_handle_cookies, Delta
431B - 567910 - Image Load, Start
432B - 578676 - boot_elf_load_and_verify_image: boot_auth_compute_verify_hash for 21:0
433D - 10888 - QHEE Image Loaded, Delta - (258280 Bytes)
434B - 578798 - Image Load, Start
435B - 589473 - boot_elf_load_and_verify_image: boot_auth_compute_verify_hash for 10:0
436D - 10706 - RPM Image Loaded, Delta - (224104 Bytes)
437B - 589534 - Image Load, Start
438D - 0 - STI Image Loaded, Delta - (0 Bytes)
439B - 589748 - Image Load, Start
440driver_init, Delta
441B - 437156 - pm_sbl_c
442[0] welcome to lk
443
444[10] platform_init()
445[10] CPU revision: 1.1
446[10] ddr_vendor is Hynix(0x6)
447[10] target_init()
448[10] check_reboot_mode: restart_reason: 0x00000000
449[20] check_reboot_mode: restart_reason: 0x00000000
450[20] target_init(): abnrst_subsys_skip: 0
451[30] RPM GLink Init
452[30] Opening RPM Glink Port success
453[30] Opening SSR Glink Port success
454[30] Glink Connection between APPS and RPM established
455[30] Glink Connection between APPS and RPM established
456[60] UFS init success
457[60] htc_mmc_read_alignment: 'misc', transform (0x9800, 2048) -> (0x9000, 4096)
458[70] reboot_block.reason = 00000000
459[70] htc_mmc_write_alignment: 'misc', transform (0x9800, 2048) -> (0x9000)
460[80] check_reboot_mode: restart_reason: 0x00000000
461[80] pon reason: 0xa1, 0xb1
462[80] pm8x41_get_is_cold_boot: cold boot
463[90] Qseecom Init Done in Appsbl version is 0x1000000
464[90] secure app region addr=0x86600000 size=0x2200000[100] TZ App region notif returned with status:0 addr:86600000 size:35651584
465[110] TZ App log region register returned with status:0 addr:83a81000 size:4096
466[110] Qseecom TZ Init Done in Appsbl
467[180] Loading (cmnlib32_a) done
468[180] qseecom_start_app: Loading app keymaster_a for the first time'
469[210] <8>keymaster: "\"KEYMASTER Init \""
470[210] qseecom_start_app: Loading app bootlocker_a for the first time'
471[240] <8>bootlocker: "bootlocker App Init "
472[240] <8>bootlocker: "Version: 0.4"
473[250] <8>bootlocker: "nResult: [0], reboot_count: [0], unlock_bl_reboot_count: [0]"
474[260] read_device_info_rpmb
475[260] LK SEC APP Handle: 0x1
476[270] <8>keymaster: "\"cmd_id=KEYMASTER_READ_KM_DEVICE_STATE\""
477[270] <8>keymaster: "\"open_add_km_partition status:0\""
478[280] <8>keymaster: "\"secboot device : 1\""
479[280] <8>keymaster: "\"cmd_id=KEYMASTER_READ_KM_DEVICE_STATE done with ret: 0 time taken: 18\""
480[290] htc_read_device_info: mmc ANDROID-BOOT!,rpmb ANDROID-BOOT!
481[300] htc_read_device_info: is_unlocked= 1 verity_mode = enforcing
482[300] partition_get_index: err 2 on config
483[310] pm8x41_read_time(): RTC_WR_EN_CTL1: 0x80
484[310] pm8x41_read_bytes: value: 0x92
485[310] pm8x41_read_bytes: value: 0x71
486[320] pm8x41_read_bytes: value: 0xfc
487[320] pm8x41_read_bytes: value: 0x3
488[320] val0:146 val1:113 val2:252 val3:3
489[330] pm8x41_read_time: secs = 66875794, h::m:s == 0::36::34, d/m/y = 14/1/72
490[330] record_rtc_start_time: secs = 66875794, h::m:s == 0::36::34, d/m/y = 14/1/72
491[340] ### LK Start time: 1972-02-14 00:36:34
492[350] htc_mmc_read_alignment: 'mfg', transform (0xa000, 2048) -> (0xa000, 4096)
493[350] htc_mmc_read_alignment: 'mfg', transform (0xd000, 2048) -> (0xd000, 4096)
494[360] htc_mmc_read_alignment: 'mfg', transform (0xd800, 2048) -> (0xd000, 4096)
495[370] htc_mmc_read_alignment: 'mfg', transform (0xe000, 2048) -> (0xe000, 4096)
496[380] htc_mmc_read_alignment: 'mfg', transform (0x12000, 2048) -> (0x12000, 4096)
497[380] htc_mmc_read_alignment: 'mfg', transform (0x14800, 2048) -> (0x14000, 4096)
498[390] device_need_halt(0)
499[390] Set ps_hold reset type as PM:warm reset [400] PMI: warm reset
500[400] check_reboot_mode: restart_reason: 0x00000000
501[400] bootflow: KEY_VOLUMEDOWN
502
503[410] bootflow, bootmode_key_check(KEY) => fastboot
504[410] setting_battery_stored_data_check: magic_num=0, stored_soc=0, currtime=0, batt_temp=252645135, total_level_raw=0, overheat_55_sec=0, batt_first_use_time=0, batt_cycle_checksum=0
505[430] Return value from recv_data: 14
506[440] Return value from recv_data: 14
507[450] Return value from recv_data: 14
508[480] force_clear_ramdump_flag_if_security_on , skip force erase ramdump enable flag
509[480] htc_secure_board_info_init: htc_secure_board_info_init
510[490] allocate_secure_buffer_for_radio: ret = 0
511[490] htc_radio_share_mem_init: htc_radio_share_mem_init
512[500] [smem]htc_radio_share_mem_init: RCMS NAME=, SKU_NAME=, version=0x20140901, size=2048, boot_mode=2, radioflag=0x8, radioflagex1=0x0, radioflagex2=0x0
513[510] allocate_secure_buffer_for_radio: ret = 0
514[520] usb_typec_init : pcbid = 0x80, bomid = 0x4
515[520] target_fingerprint_init
516[520] target_get_fingerprint_id: status:1
517[530] Multi Slot boot is supported
518[530] Not able to search the panel:
519[540] Panel ID (id) = (0)
520[540] 5.5" M1_SAMSUNG_S6E3HA3_WQHD_DUALDSI_CMD_PANEL
521[550] init_panel_data() Samsung on size:14, off size:2
522[550] panel_operating_mode=0xb
523[560] framebuffer addr =0xC0000000
524[560] power on M1_SAMSUNG_COMMAND panel
525[560] Enable LDO 29
526[570] Return value from recv_data: 14
527[580] Return value from recv_data: 14
528[600] Config MIPI_CMD_PANEL.
529[620] mdss_dsi_read_display_id : Read display id =0x00210100 (0x00210100)
530[820] Turn on MIPI_CMD_PANEL.
531[820] imgver: bootloader: version found: 8996-012001-1711291800
532[910] imgver: baseband: version found: 8996-130091-1802061512
533[910] pmi8994_get_batt_voltage_pmic_reg : voltage raw data, data=0x71
534[920] check_reboot_mode: restart_reason: 0x00000000
535[920] BATT V=4407, bootmode=2, cfg=0x8
536[930] --------------------------
537[930] FG Check ALG start.
538[930] alg_sts: 0x21.
539[930] ima_opr_sts: 0 alg_sts: 21 count=0
540[940] ALG check ok
541[940] --------------------------
542[940] 0x13f2: 7
543[940] pmi8994_is_charger_usbin_suspend: 0x807=0x0, 0x1242=0x0, 0x1309=0x22, 0x1310=0x4, 0x1340=0x1, 0x1610=0x2
544[950] pm8x41_get_is_cold_boot: cold boot
545[960] check_reboot_mode: restart_reason: 0x00000000
546[960] target_pause_for_battery_charge : pon_reason is 177 cold_boot:1
547[970] target_pause_for_battery_charge : GCC_RESET_STATUS(0x66BF028): 0x2
548[970] LED off !!
549[980] [multislot] BOOT_LUN = 1
550[980] [multislot] attribute:boot_a=000000a7
551[980] [multislot] attribute:boot_b=0000003b
552[990] pm8x41_get_is_cold_boot: cold boot
553[990] setting_battery_stored_data_clean: magic_num=0, stored_soc=0, currtime=0, batt_temp=252645135, total_level_raw=0, overheat_55_sec=0, batt_first_use_time=0, batt_cycle_checksum=0
554[1010] Backlight enable = 1
555[1010] partition_get_index: err 2 on config
556[1010] aboot_init: check_hard_reboot_mode=0x00
557[1020] enter normal mode
558[1020] aboot_fastboot_register_commands: command registered: batt_enable_bms_charger_log
559[1030] aboot_fastboot_register_commands: command registered: batt_disable_tbatt_protect
560[1040] aboot_fastboot_register_commands: command registered: batt_enable_fast_charge
561[1040] aboot_fastboot_register_commands: command registered: batt_test_pwr_supply
562[1050] aboot_fastboot_register_commands: command registered: batt_for_pa_test
563[1060] aboot_fastboot_register_commands: command registered: batt_disable_safty_timer
564[1060] aboot_fastboot_register_commands: command registered: batt_keep_charge_on
565[1070] aboot_fastboot_register_commands: command registered: uart
566[1080] aboot_fastboot_register_commands: command registered: htc_radio_debug_func
567[1080] aboot_fastboot_register_commands: command registered: htcramdump
568[1090] aboot_fastboot_register_commands: command registered: autordump2storage
569[1100] battery voltage: 4092000uV
570[1100] battery voltage: 4092000uV
571[1100] HTC bootlocker Handle: 0x2
572[1120] bootlocker data: [0x0], len: [0], status: [0], ret: [0]
573[1120] Reboot count read successfully
574[1130] [ANTI-BL][I] remaining reboot count: [0], anti-rollback permission this boot: [No]
575[1140] HTC bootlocker Handle: 0x2
576[1160] bootlocker data: [0x0], len: [0], status: [0], ret: [0]
577[1160] Reboot count write successfully
578[1170] fastboot_init()
579[1180] QMP phy initialization failed, fallback to HighSpeed only mode
580[1180] HW Security has been enabled !
581[1190] [DISP] Trigger updating for MIPI_CMD_PANEL.
582[1760] [DISP] Trigger updating for MIPI_CMD_PANEL.
583[2600] fastboot: processing commands
584[13260] fastboot: getvar:slot-count
585[13260] battery voltage: 4092000uV
586[13260] battery voltage: 4166000uV
587[13310] fastboot: download:01e04000
588[13850] fastboot: boot
589[13850] boot_verifier: Device is in ORANGE boot state.
590[13850] Device is unlocked! Skipping set device status...
591[13860] Your device has been unlocked and can't be trusted.
592[13860] LK SEC APP Handle: 0x1
593[13880] <8>keymaster: "\"cmd_id=KEYMASTER_SET_ROT\""
594[13880] <8>keymaster: "\"cmd_id=KEYMASTER_SET_ROT done with ret: 0 time taken: 1\""
595[13890] decompressing kernel image: start
596[14370] decompressing kernel image: done
597[14390] Add DTB entry 422/00000080/0x00000000/10001/20009/10013/0/0/92cf228b/5fc44
598[14390] Add DTB entry 422/00000080/0x00000000/10001/3/4/45/1/92cf228b/5fc44
599[14400] Best match DTB tags 422/00000080/0x00000000/10001/20009/10013/0/0/92cf228b/5fc44
600[14420] Using pmic info 0x20009/0x10013/0x0/0x0 for device 0x20009/0x455013/0x0/0x0
601[14460] [DISP] Trigger updating for MIPI_CMD_PANEL.
602[14480] pm8x41_get_is_cold_boot: cold boot
603[14480] check_reboot_mode: restart_reason: 0x00000000
604[14480] target_pause_for_battery_charge : pon_reason is 177 cold_boot:1
605[14490] target_pause_for_battery_charge : GCC_RESET_STATUS(0x66BF028): 0x2
606[14510] display kernel cmdline: mdss_mdp.panel=1:dsi:0:qcom,mdss_dsi_samsung_s6e3ha3_wqhd_cmd:1:qcom,mdss_dsi_samsung_s6e3ha3_wqhd_cmd:cfg:split_dsi
607[14520] pm8x41_get_is_cold_boot: cold boot
608[14520] ddr_vendor is Hynix(0x6)
609[14520] chipset_ver is 1005F0E1
610[14540] chipset_ver is 1005F0E1
611[14540] HW Security has been enabled !
612[14540] Device CID is not super CID
613[14550] Device CID is not super CID
614[14550] target_get_fingerprint_id: status:1
615[14550] [HTC] lba of setting:0
616[14570] [HTC] 0 is read from setting, which is invalid
617[14570] get_writable_core_dump_size: check_rdump_ext4_file_map() fails: -1
618[14580] Get partition(system_a) lun and count
619[14580] Found partitoin name (system_a)
620[14580] Add kernel cmdline parameter( ro root=/dev/dm-0 dm="system none ro,0 1 android-verity /dev/sda33") to enable dm-verity
621[14600] Add kernel cmdline parameter( rootwait skip_initramfs init=/init) to boot without ramdisk
622[14610] get_wifi_country_code: mfg_wifi 10
623[14630] wifi_country US
624[14630] get_wifi_country_code: mfg_wifi 10
625[14630] wifi_country US
626[14630] cmdline: console=ttyHSL0,115200,n8 androidboot.console=ttyHSL0 androidboot.hardware=marlin user_debug=31 ehci-hcd.park=3 lpm_levels.sleep_disabled=1 cma=32M@0-0xffffffff loop.max_part=7 androidboot.fastboot=1 buildvariant=eng androidboot.bootdevice=624000[14670] Updating device tree: start
627[14690] Appending /chosen/misc node data into FDT
628[14700] firmware_main_version: 16-byte added
629[14700] enable_log: 64-byte added
630[14700] (setting_get_anti_rollback_1_lsb):(00000000)
631[14720] QFPROM_CORR_ANTI_ROLLBACK_1_LSB: 9-byte added
632[14720] (setting_get_anti_rollback_1_msb):(00000000)
633[14730] QFPROM_CORR_ANTI_ROLLBACK_1_MSB: 9-byte added
634[14730] (setting_get_anti_rollback_2_lsb):(00000000)
635[14750] QFPROM_CORR_ANTI_ROLLBACK_2_LSB: 9-byte added
636[14750] (setting_get_anti_rollback_2_msb):(00000000)
637[14760] QFPROM_CORR_ANTI_ROLLBACK_2_MSB: 9-byte added
638[14760] [INFO] setting_get_msm_serial: chip serial number msm_serial: a8f7a84f
639[14780] QFPROM_CORR_MSM_SERIAL_NUM: 21-byte added
640[14790] Appending /chosen/mfg node data into FDT
641[14790] skuid.bom_id: 1-byte added
642[14790] skuid.dw0: 4-byte added
643[14790] skuid.rf_id: 32-byte added
644[14810] skuid.engineer_id: 4-byte added
645[14810] skuid.pcb_id: 1-byte added
646[14820] Appending /chosen/board_info node data into FDT
647[14820] pid: 4-byte added
648[14840] Appending calibration data info FDT
649[14840] bt_flash: 6-byte added
650[14850] ps_flash: 8-byte added
651[14850] ws_flash: 4-byte added
652[14850] als_flash: 4-byte added
653[14850] gs_flash: 4-byte added
654[14870] gyro_flash: 768-byte added
655[14870] wifi_eeprom: 2048-byte added
656[14870] cam_awb: 16384-byte added
657[14880] ps_adi_flash: 11-byte added
658[14880] bs_flash: 5-byte added
659[14880] disp_flash: 64-byte added
660[14900] Appending /chosen/radio node data into FDT
661[14900] secure_flag: 4-byte added
662[14910] htc_smem_pid: 4-byte added
663[14910] htc_smem_cid: 16-byte added
664[14910] htc_smem_imei: 16-byte added
665[14930] htc_smem_imei2: 16-byte added
666[14930] htc_smem_meid: 16-byte added
667[14930] sku_id: 48-byte added
668[14930] fdt_get_wlan_ramdump_size: wlan ramdump len: 0x200000
669[14940] target_update_battery_data PLATFORM = 8996
670[14960] target_update_battery_data offset:-1
671[14960] target_update_battery_data fdt_setprop_inplace fail in magic_num,ret:-4
672[14970] WARN: Failed to update battery data
673[14970] target_update_display_data done
674[14990] Updating device tree: done
675[14990] platform_vib_delay: delay for 200 ms to ensure vibrator can be disabled
676[15120] platform_vib_delay: delay for 200 ms end
677[15120] set_imem_lock_state: state = 0
678[15140] restart_reason set to 0x776655aa
679[15140] UFS set Write Protection
680[15140] Power on Write Protect request failed. Retrying again.
681[15150] Power on Write Protect status: 1
682[15150] Turn off MIPI_CMD_PANEL.
683[15150] Continuous splash enabled, keeping panel alive.
684[15170] target_uninit(): abnrst_subsys_skip: 0
685[15170] <8>keymaster: "\"cmd_id=KEYMASTER_MILESTONE_CALL\""
686[15180] <8>keymaster: "\"cmd_id=KEYMASTER_MILESTONE_CALL done with ret: 0 time taken: 1\""
687[15200] Return value from recv_data: 14
688[15210] RPM GLINK UnInit
689[15210] Qseecom De-Init Done in Appsbl
690[15210] booting linux @ 0x80080000, ramdisk @ 0x82200000 (11342844), tags/device tree @ 0x82000000
691[15230] pm8x41_read_time(): RTC_WR_EN_CTL1: 0x80
692[15230] pm8x41_read_bytes: value: 0xaa
693[15230] pm8x41_read_bytes: value: 0x71
694[15230] pm8x41_read_bytes: value: 0xfc
695[15230] pm8x41_read_bytes: value: 0x3
696[15230] val0:170 val1:113 val2:252 val3:3
697[15230] pm8x41_read_time: secs = 66875818, h::m:s == 0::36::58, d/m/y = 14/1/72
698[15230] record_rtc_end_time: secs = 66875818, h::m:s == 0::36::58, d/m/y = 14/1/72
699[15230] ### LK End time: 1972-02-14 00:36:58
700[15230] ### LK delta time: 24 secs
701[15230] Jumping to kernel via monitor
702[ 0.000000] c0 0 Initializing cgroup subsys cpuset
703[ 0.000000] c0 0 Initializing cgroup subsys cpu
704[ 0.000000] c0 0 Initializing cgroup subsys cpuacct
705[ 0.000000] c0 0 Initializing cgroup subsys schedtune
706[ 0.000000] c0 0 Linux version 3.18.52-g06de206-dirty (dees_troy@XPS15) (gcc version 4.9.x 20150123 (prerelease) (GCC) ) #1 SMP PREEMPT Wed Sep 13 08:12:37 CDT 2017
707[ 0.000000] c0 0 Boot CPU: AArch64 Processor [512f2011]
708[ 0.000000] c0 0 Machine: HTC Corporation. MSM8996pro v1.1 + PMI8996 Marlin A
709[ 0.000000] c0 0 efi: Getting EFI parameters from FDT:
710[ 0.000000] c0 0 efi: UEFI not found.
711[ 0.000000] c0 0 Reserved memory: reserved region for node 'removed_regions@85800000': base 0x0000000000000000, size 48 MiB
712[ 0.000000] c0 0 Reserved memory: reserved region for node 'peripheral_region@8ea00000': base 0x0000000000000000, size 45 MiB
713[ 0.000000] c0 0 Reserved memory: reserved region for node 'modem_region@88800000': base 0x0000000000000000, size 98 MiB
714[ 0.000000] c0 0 Reserved memory: reserved region for node 'dfps_data_mem@83400000': base 0x0000000000000000, size 0 MiB
715[ 0.000000] c0 0 Reserved memory: reserved region for node 'cont_splash_mem@83401000': base 0x0000000000000000, size 49 MiB
716[ 0.000000] c0 0 Reserved memory: reserved region for node 'cont_splash_mem_hdmi@b1c00000': base 0x0000000000000000, size 35 MiB
717[ 0.000000] c0 0 Reserved memory: reserved region for node 'htc_reserve1_region@0': base 0x0000000000000000, size 1 MiB
718[ 0.000000] c0 0 Reserved memory: reserved region for node 'msm_rtb_region@0': base 0x0000000000000000, size 1 MiB
719[ 0.000000] c0 0 Reserved memory: reserved region for node 'htc_reserve2_region@0': base 0x0000000000000000, size 8 MiB
720[ 0.000000] c0 0 Reserved memory: reserved region for node 'htc_rtel_region@0': base 0x0000000000000000, size 20 MiB
721[ 0.000000] c0 0 Reserved memory: reserved region for node 'ramoops_region@0': base 0x0000000000000000, size 1 MiB
722[ 0.000000] c0 0 Removed memory: created DMA memory pool at 0x0000000000000000, size 48 MiB
723[ 0.000000] c0 0 Reserved memory: initialized node removed_regions@85800000, compatible id removed-dma-pool
724[ 0.000000] c0 0 Removed memory: created DMA memory pool at 0x0000000000000000, size 45 MiB
725[ 0.000000] c0 0 Reserved memory: initialized node peripheral_region@8ea00000, compatible id removed-dma-pool
726[ 0.000000] c0 0 Reserved memory: allocated memory for 'adsp_region' node: base 0x0000000000000000, size 4 MiB
727[ 0.000000] c0 0 Reserved memory: incorrect alignment of CMA region
728[ 0.000000] c0 0 Reserved memory: allocated memory for 'qseecom_region' node: base 0x0000000000000000, size 20 MiB
729[ 0.000000] c0 0 Reserved memory: created CMA memory pool at 0x0000000000000000, size 20 MiB
730[ 0.000000] c0 0 Reserved memory: initialized node qseecom_region, compatible id shared-dma-pool
731[ 0.000000] c0 0 Reserved memory: allocated memory for 'secure_region' node: base 0x0000000000000000, size 92 MiB
732[ 0.000000] c0 0 Reserved memory: created CMA memory pool at 0x0000000000000000, size 92 MiB
733[ 0.000000] c0 0 Reserved memory: initialized node secure_region, compatible id shared-dma-pool
734[ 0.000000] c0 0 Removed memory: created DMA memory pool at 0x0000000000000000, size 98 MiB
735[ 0.000000] c0 0 Reserved memory: initialized node modem_region@88800000, compatible id removed-dma-pool
736[ 0.000000] c0 0 Removed memory: created DMA memory pool at 0x0000000000000000, size 1 MiB
737[ 0.000000] c0 0 Reserved memory: initialized node htc_reserve1_region@0, compatible id removed-dma-pool
738[ 0.000000] c0 0 Removed memory: created DMA memory pool at 0x0000000000000000, size 1 MiB
739[ 0.000000] c0 0 Reserved memory: initialized node msm_rtb_region@0, compatible id removed-dma-pool
740[ 0.000000] c0 0 Removed memory: created DMA memory pool at 0x0000000000000000, size 8 MiB
741[ 0.000000] c0 0 Reserved memory: initialized node htc_reserve2_region@0, compatible id removed-dma-pool
742[ 0.000000] c0 0 Reserved memory: created CMA memory pool at 0x0000000000000000, size 20 MiB
743[ 0.000000] c0 0 Reserved memory: initialized node htc_rtel_region@0, compatible id shared-dma-pool
744[ 0.000000] c0 0 Removed memory: created DMA memory pool at 0x0000000000000000, size 1 MiB
745[ 0.000000] c0 0 Reserved memory: initialized node ramoops_region@0, compatible id removed-dma-pool
746[ 0.000000] c0 0 cma: Reserved 32 MiB at 0x0000000000000000
747[ 0.000000] c0 0 psci: probing for conduit method from DT.
748[ 0.000000] c0 0 psci: PSCIv1.0 detected in firmware.
749[ 0.000000] c0 0 psci: Using standard PSCI v0.2 function IDs
750[ 0.000000] c0 0 psci: Initializing psci_cpu_init
751[ 0.000000] c0 0 psci: Initializing psci_cpu_init
752[ 0.000000] c0 0 psci: Initializing psci_cpu_init
753[ 0.000000] c0 0 PERCPU: Embedded 15 pages/cpu @0000000000000000 s23424 r8192 d29824 u61440
754[ 0.000000] c0 0 Built 1 zonelists in Zone order, mobility grouping on. Total pages: 974562
755[ 0.000000] c0 0 Kernel command line: console=ttyHSL0,115200,n8 androidboot.console=ttyHSL0 androidboot.hardware=marlin user_debug=31 ehci-hcd.park=3 lpm_levels.sleep_disabled=1 cma=32M@0-0xffffffff loop.max_part=7 androidboot.fastboot=1 buildvariant=eng androidboot.bootdevice=624000.ufshc androidboot.verifiedbootstate=orange androidboot.veritymode=enforcing androidboot.keymaster=1 androidboot.serialno=HT72P0203430 androidboot.baseband=msm mdss_mdp.panel=1:dsi:0:qcom,mdss_dsi_samsung_s6e3ha3_wqhd_cmd:1:qcom,mdss_dsi_samsung_s6e3ha3_wqhd_cmd:cfg:split_dsi androidboot.slot_suffix=_a fpsimd.fpsimd_settings=0 app_setting.use_app_setting=0 kernelflag=0x00000000 debugflag=0x00000000 androidboot.hardware.revision=PVT radioflag=0x00000008 radioflagex1=0x00000000 radioflagex2=0x00000000 cpumask=0x00000000 androidboot.hardware.ddr=4096MB,Hynix,LPDDR4 androidboot.ddrinfo=00000006 androidboot.ddrsize=4GB androidboot.hardware.color=GRA00 androidboot.hardware.ufs=32GB,Samsung androidboot.msm.hw_ver_id=268[ 0.000000] c0 0 dm: will configure 'system' on dm-0
756[ 0.000000] c0 0 log_buf_len individual max cpu contribution: 32768 bytes
757[ 0.000000] c0 0 log_buf_len total cpu_extra contributions: 98304 bytes
758[ 0.000000] c0 0 log_buf_len min size: 131072 bytes
759[ 0.000000] c0 0 log_buf_len: 262144 bytes
760[ 0.000000] c0 0 early log buf free: 123756(94%)
761[ 0.000000] c0 0 PID hash table entries: 4096 (order: 3, 32768 bytes)
762[ 0.000000] c0 0 Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
763[ 0.000000] c0 0 Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
764[ 0.000000] c0 0 Memory: 3584992K/3960128K available (15765K kernel code, 1679K rwdata, 7620K rodata, 492K init, 3245K bss, 375136K reserved)
765[ 0.000000] c0 0 Virtual kernel memory layout:
766[ 0.000000] c0 0 vmalloc : 0xffffff8000000000 - 0xffffffbdbfff0000 ( 246 GB)
767[ 0.000000] c0 0 vmemmap : 0xffffffbdc0000000 - 0xffffffbfc0000000 ( 8 GB maximum)
768[ 0.000000] c0 0 0xffffffbdc0000000 - 0xffffffbdc3f95400 ( 63 MB actual)
769[ 0.000000] c0 0 PCI I/O : 0xffffffbffa000000 - 0xffffffbffb000000 ( 16 MB)
770[ 0.000000] c0 0 fixed : 0xffffffbffbdfd000 - 0xffffffbffbdff000 ( 8 KB)
771[ 0.000000] c0 0 modules : 0xffffffbffc000000 - 0xffffffc000000000 ( 64 MB)
772[ 0.000000] c0 0 memory : 0xffffffc000000000 - 0xffffffc0fe550000 ( 4069 MB)
773[ 0.000000] c0 0 .init : 0x0000000000000000 - 0x0000000000000000 ( 492 KB)
774[ 0.000000] c0 0 .text : 0x0000000000000000 - 0x0000000000000000 ( 15774 KB)
775[ 0.000000] c0 0 .data : 0x0000000000000000 - 0x0000000000000000 ( 1679 KB)
776[ 0.000000] c0 0 SLUB: HWalign=128, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
777[ 0.000000] c0 0 Preemptible hierarchical RCU implementation.
778[ 0.000000] c0 0 RCU dyntick-idle grace-period acceleration is enabled.
779[ 0.000000] c0 0 RCU kthread priority: 1.
780[ 0.000000] c0 0
781[ 0.000000] c0 0 **********************************************************
782[ 0.000000] c0 0 ** NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE **
783[ 0.000000] c0 0 ** **
784[ 0.000000] c0 0 ** trace_printk() being used. Allocating extra memory. **
785[ 0.000000] c0 0 ** **
786[ 0.000000] c0 0 ** This means that this is a DEBUG kernel and it is **
787[ 0.000000] c0 0 ** unsafe for produciton use. **
788[ 0.000000] c0 0 ** **
789[ 0.000000] c0 0 ** If you see this message and you are not debugging **
790[ 0.000000] c0 0 ** the kernel, report this immediately to your vendor! **
791[ 0.000000] c0 0 ** **
792[ 0.000000] c0 0 ** NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE **
793[ 0.000000] c0 0 **********************************************************
794[ 0.000000] c0 0 NR_IRQS:64 nr_irqs:64 0
795[ 0.000000] c0 0 CPU0: found redistributor 0 region 0:0x0000000000000000
796[ 0.000000] c0 0 mpm_init_irq_domain(): Cannot find irq controller for qcom,gpio-parent
797[ 0.000000] c0 0 MPM 1 irq mapping errored -517
798[ 0.000000] c0 0 Architected cp15 and mmio timer(s) running at 19.20MHz (virt/virt).
799[ 0.000003] c0 0 sched_clock: 56 bits at 19MHz, resolution 52ns, wraps every 3579139424256ns
800[ 0.000017] c0 0 Switched to clocksource arch_sys_counter
801[ 0.000839] c0 0 Calibrating delay loop (skipped), value calculated using timer frequency.. 38.00 BogoMIPS (lpj=64000)
802[ 0.000854] c0 0 pid_max: default: 32768 minimum: 301
803[ 0.000919] c0 0 Security Framework initialized
804[ 0.000934] c0 0 SELinux: Initializing.
805[ 0.000995] c0 0 Mount-cache hash table entries: 8192 (order: 4, 65536 bytes)
806[ 0.001003] c0 0 Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes)
807[ 0.001411] c0 0 Initializing cgroup subsys freezer
808[ 0.001428] c0 0 Initializing cgroup subsys debug
809[ 0.001733] c0 1 sched-energy: Sched-energy-costs installed from DT
810[ 0.001743] c0 1 CPU0: update cpu_capacity 763
811[ 0.001775] c0 1 hw perfevents: enabled with arm/armv8-pmuv3 PMU driver, 9 counters available
812[ 0.001795] c0 1 EFI services will not be available.
813[ 0.001811] c0 1 ASID allocator initialised with 65536 entries
814[ 0.002457] c0 0 NOHZ: local_softirq_pending 02
815[ 0.003363] c0 0 NOHZ: local_softirq_pending 02
816[ 0.024358] c0 1 MSM Memory Dump base table set up
817[ 0.024379] c0 1 MSM Memory Dump apps data table already set up in LK
818[ 0.024400] c0 1 hyp_assign_table is not functional as qcom_secure_mem is not allocated.
819[ 0.024823] c0 1 clock-cpu-8996: configuring clocks for the perf cluster
820[ 0.024969] c0 1 cpu_clock_8996_early_init: finished CPU clock configuration
821[ 0.040015] c1 0 CPU1: update cpu_capacity 763
822[ 0.040028] c1 0 CPU1: found redistributor 1 region 0:0x0000000000000000
823[ 0.040067] c1 0 CPU1: Booted secondary processor [512f2011]
824[ 0.051676] c2 0 CPU2: update cpu_capacity 1024
825[ 0.051705] c2 0 CPU2: found redistributor 100 region 0:0x0000000000000000
826[ 0.051781] c2 0 CPU2: Booted secondary processor [512f2051]
827[ 0.063148] c3 0 CPU3: update cpu_capacity 1024
828[ 0.063159] c3 0 CPU3: found redistributor 101 region 0:0x0000000000000000
829[ 0.063183] c3 0 CPU3: Booted secondary processor [512f2051]
830[ 0.063312] c0 1 Brought up 4 CPUs
831[ 0.063383] c0 1 SMP: Total of 4 processors activated.
832[ 0.063392] c0 1 CPU features: detected feature: GIC system register CPU interface
833[ 0.063540] c0 1 CPU3: update max cpu_capacity 1024
834[ 0.063993] c1 32 ------------[ cut here ]------------
835[ 0.064023] c1 32 WARNING: CPU: 1 PID: 32 at kernel/sched/fair.c:5011 energy_aware_wake_cpu+0xea8/0x10bc()
836[ 0.064030] c1 32 Modules linked in:
837[ 0.064043] c1 32 CPU: 1 PID: 32 Comm: kthreadd Not tainted 3.18.52-g06de206-dirty #1
838[ 0.064050] c1 32 Hardware name: HTC Corporation. MSM8996pro v1.1 + PMI8996 Marlin A (DT)
839[ 0.064057] c1 32 Call trace:
840[ 0.064071] c1 32 [<ffffffc00008c3b4>] dump_backtrace+0x0/0x13c
841[ 0.064080] c1 32 [<ffffffc00008c7a0>] show_stack+0x14/0x1c
842[ 0.064090] c1 32 [<ffffffc000fd3348>] dump_stack+0x88/0xac
843[ 0.064099] c1 32 [<ffffffc0000ab040>] warn_slowpath_null+0x64/0xd0
844[ 0.064107] c1 32 [<ffffffc0000e96e4>] energy_aware_wake_cpu+0xea8/0x10bc
845[ 0.064115] c1 32 [<ffffffc0000ea510>] select_task_rq_fair+0xc18/0xe04
846[ 0.064127] c1 32 [<ffffffc0000d998c>] try_to_wake_up+0x19c/0x41c
847[ 0.064135] c1 32 [<ffffffc0000d9ce4>] default_wake_function+0x10/0x18
848[ 0.064145] c1 32 [<ffffffc0000f2de8>] __wake_up_common+0x5c/0x9c
849[ 0.064151] c1 32 [<ffffffc0000f2e3c>] __wake_up_locked+0x14/0x1c
850[ 0.064159] c1 32 [<ffffffc0000f397c>] complete+0x40/0x5c
851[ 0.064169] c1 32 [<ffffffc0000cc144>] kthread+0xc0/0xfc
852[ 0.064193] c1 32 ---[ end trace bd3b6ef059461160 ]---
853[ 0.064227] c0 1 ------------[ cut here ]------------
854[ 0.064243] c0 1 WARNING: CPU: 0 PID: 1 at kernel/sched/fair.c:5011 energy_aware_wake_cpu+0xea8/0x10bc()
855[ 0.064249] c0 1 Modules linked in:
856[ 0.064260] c0 1 CPU: 0 PID: 1 Comm: swapper/0 Tainted: G W 3.18.52-g06de206-dirty #1
857[ 0.064267] c0 1 Hardware name: HTC Corporation. MSM8996pro v1.1 + PMI8996 Marlin A (DT)
858[ 0.064272] c0 1 Call trace:
859[ 0.064283] c0 1 [<ffffffc00008c3b4>] dump_backtrace+0x0/0x13c
860[ 0.064293] c0 1 [<ffffffc00008c7a0>] show_stack+0x14/0x1c
861[ 0.064301] c0 1 [<ffffffc000fd3348>] dump_stack+0x88/0xac
862[ 0.064308] c0 1 [<ffffffc0000ab040>] warn_slowpath_null+0x64/0xd0
863[ 0.064317] c0 1 [<ffffffc0000e96e4>] energy_aware_wake_cpu+0xea8/0x10bc
864[ 0.064326] c0 1 [<ffffffc0000ea510>] select_task_rq_fair+0xc18/0xe04
865[ 0.064335] c0 1 [<ffffffc0000d998c>] try_to_wake_up+0x19c/0x41c
866[ 0.064344] c0 1 [<ffffffc0000d9c38>] wake_up_process+0x2c/0x64
867[ 0.064353] c0 1 [<ffffffc0000c90f8>] __alloc_workqueue_key+0x464/0x494
868[ 0.064365] c0 1 [<ffffffc00176abb8>] usermodehelper_init+0x30/0x48
869[ 0.064377] c0 1 [<ffffffc001762bb4>] kernel_init_freeable+0x138/0x290
870[ 0.064390] c0 1 [<ffffffc000fcd5bc>] kernel_init+0x18/0x134
871[ 0.064396] c0 1 ---[ end trace bd3b6ef059461161 ]---
872[ 0.066928] c1 33 ------------[ cut here ]------------
873[ 0.066956] c1 33 WARNING: CPU: 1 PID: 33 at kernel/sched/fair.c:5011 energy_aware_wake_cpu+0xea8/0x10bc()
874[ 0.066963] c1 33 Modules linked in:
875[ 0.066976] c1 33 CPU: 1 PID: 33 Comm: kthreadd Tainted: G W 3.18.52-g06de206-dirty #1
876[ 0.066982] c1 33 Hardware name: HTC Corporation. MSM8996pro v1.1 + PMI8996 Marlin A (DT)
877[ 0.066989] c1 33 Call trace:
878[ 0.067001] c1 33 [<ffffffc00008c3b4>] dump_backtrace+0x0/0x13c
879[ 0.067009] c1 33 [<ffffffc00008c7a0>] show_stack+0x14/0x1c
880[ 0.067019] c1 33 [<ffffffc000fd3348>] dump_stack+0x88/0xac
881[ 0.067028] c1 33 [<ffffffc0000ab040>] warn_slowpath_null+0x64/0xd0
882[ 0.067036] c1 33 [<ffffffc0000e96e4>] energy_aware_wake_cpu+0xea8/0x10bc
883[ 0.067043] c1 33 [<ffffffc0000ea510>] select_task_rq_fair+0xc18/0xe04
884[ 0.067054] c1 33 [<ffffffc0000d998c>] try_to_wake_up+0x19c/0x41c
885[ 0.067063] c1 33 [<ffffffc0000d9ce4>] default_wake_function+0x10/0x18
886[ 0.067072] c1 33 [<ffffffc0000f2de8>] __wake_up_common+0x5c/0x9c
887[ 0.067079] c1 33 [<ffffffc0000f2e3c>] __wake_up_locked+0x14/0x1c
888[ 0.067087] c1 33 [<ffffffc0000f397c>] complete+0x40/0x5c
889[ 0.067096] c1 33 [<ffffffc0000cc144>] kthread+0xc0/0xfc
890[ 0.067102] c1 33 ---[ end trace bd3b6ef059461162 ]---
891[ 0.067124] c1 33 CPU1: update max cpu_capacity 763
892[ 0.067148] c0 1 ------------[ cut here ]------------
893[ 0.067168] c0 1 WARNING: CPU: 0 PID: 1 at kernel/sched/fair.c:5011 energy_aware_wake_cpu+0xea8/0x10bc()
894[ 0.067175] c0 1 Modules linked in:
895[ 0.067184] c0 1 CPU: 0 PID: 1 Comm: swapper/0 Tainted: G W 3.18.52-g06de206-dirty #1
896[ 0.067191] c0 1 Hardware name: HTC Corporation. MSM8996pro v1.1 + PMI8996 Marlin A (DT)
897[ 0.067196] c0 1 Call trace:
898[ 0.067206] c0 1 [<ffffffc00008c3b4>] dump_backtrace+0x0/0x13c
899[ 0.067215] c0 1 [<ffffffc00008c7a0>] show_stack+0x14/0x1c
900[ 0.067224] c0 1 [<ffffffc000fd3348>] dump_stack+0x88/0xac
901[ 0.067231] c0 1 [<ffffffc0000ab040>] warn_slowpath_null+0x64/0xd0
902[ 0.067240] c0 1 [<ffffffc0000e96e4>] energy_aware_wake_cpu+0xea8/0x10bc
903[ 0.067248] c0 1 [<ffffffc0000ea510>] select_task_rq_fair+0xc18/0xe04
904[ 0.067257] c0 1 [<ffffffc0000d998c>] try_to_wake_up+0x19c/0x41c
905[ 0.067265] c0 1 [<ffffffc0000d9c38>] wake_up_process+0x2c/0x64
906[ 0.067274] c0 1 [<ffffffc0000c90f8>] __alloc_workqueue_key+0x464/0x494
907[ 0.067284] c0 1 [<ffffffc0017aeb0c>] net_ns_init+0x60/0x118
908[ 0.067292] c0 1 [<ffffffc000082a50>] do_one_initcall+0x98/0x1cc
909[ 0.067304] c0 1 [<ffffffc001762c58>] kernel_init_freeable+0x1dc/0x290
910[ 0.067317] c0 1 [<ffffffc000fcd5bc>] kernel_init+0x18/0x134
911[ 0.067323] c0 1 ---[ end trace bd3b6ef059461163 ]---
912[ 0.068983] c0 1 DMI not present or invalid.
913[ 0.069223] c2 24 CPU2: update max cpu_capacity 1024
914[ 0.069489] c0 1 ------------[ cut here ]------------
915[ 0.069510] c0 1 WARNING: CPU: 0 PID: 1 at kernel/sched/fair.c:5011 energy_aware_wake_cpu+0xea8/0x10bc()
916[ 0.069516] c0 1 Modules linked in:
917[ 0.069527] c0 1 CPU: 0 PID: 1 Comm: swapper/0 Tainted: G W 3.18.52-g06de206-dirty #1
918[ 0.069533] c0 1 Hardware name: HTC Corporation. MSM8996pro v1.1 + PMI8996 Marlin A (DT)
919[ 0.069539] c0 1 Call trace:
920[ 0.069549] c0 1 [<ffffffc00008c3b4>] dump_backtrace+0x0/0x13c
921[ 0.069558] c0 1 [<ffffffc00008c7a0>] show_stack+0x14/0x1c
922[ 0.069567] c0 1 [<ffffffc000fd3348>] dump_stack+0x88/0xac
923[ 0.069575] c0 1 [<ffffffc0000ab040>] warn_slowpath_null+0x64/0xd0
924[ 0.069583] c0 1 [<ffffffc0000e96e4>] energy_aware_wake_cpu+0xea8/0x10bc
925[ 0.069591] c0 1 [<ffffffc0000ea510>] select_task_rq_fair+0xc18/0xe04
926[ 0.069601] c0 1 [<ffffffc0000d998c>] try_to_wake_up+0x19c/0x41c
927[ 0.069610] c0 1 [<ffffffc0000d9c38>] wake_up_process+0x2c/0x64
928[ 0.069618] c0 1 [<ffffffc0000c90f8>] __alloc_workqueue_key+0x464/0x494
929[ 0.069627] c0 1 [<ffffffc001775914>] perf_workqueue_init+0x34/0x7c
930[ 0.069635] c0 1 [<ffffffc000082a50>] do_one_initcall+0x98/0x1cc
931[ 0.069645] c0 1 [<ffffffc001762c58>] kernel_init_freeable+0x1dc/0x290
932[ 0.069656] c0 1 [<ffffffc000fcd5bc>] kernel_init+0x18/0x134
933[ 0.069662] c0 1 ---[ end trace bd3b6ef059461164 ]---
934[ 0.075662] c0 1 pinctrl core: initialized pinctrl subsystem
935[ 0.076007] c0 1 regulator-dummy: no parameters
936[ 0.149790] c0 1 NET: Registered protocol family 16
937[ 0.151432] c0 1 schedtune: init normalization constants...
938[ 0.151445] c0 1 schedtune: CLUSTER[ 0] min_pwr: 0 max_pwr: 52
939[ 0.151455] c0 1 schedtune: CPU[0] min_pwr: 0 max_pwr: 925
940[ 0.151464] c0 1 schedtune: CPU[1] min_pwr: 0 max_pwr: 925
941[ 0.151472] c0 1 schedtune: CLUSTER[ 0] min_pwr: 0 max_pwr: 96
942[ 0.151480] c0 1 schedtune: CPU[2] min_pwr: 0 max_pwr: 1715
943[ 0.151488] c0 1 schedtune: CPU[3] min_pwr: 0 max_pwr: 1715
944[ 0.151496] c0 1 schedtune: SYSTEM min_pwr: 0 max_pwr: 5428
945[ 0.151503] c0 1 schedtune: using normalization constants mul: 2187046722 sh1: 1 sh2: 12
946[ 0.151509] c0 1 schedtune: verify normalization constants...
947[ 0.151516] c0 1 schedtune: max_pwr/2^0: 5428 => norm_pwr: 1024
948[ 0.151523] c0 1 schedtune: max_pwr/2^1: 2714 => norm_pwr: 512
949[ 0.151529] c0 1 schedtune: max_pwr/2^2: 1357 => norm_pwr: 256
950[ 0.151535] c0 1 schedtune: max_pwr/2^3: 678 => norm_pwr: 127
951[ 0.151542] c0 1 schedtune: max_pwr/2^4: 339 => norm_pwr: 63
952[ 0.151548] c0 1 schedtune: max_pwr/2^5: 169 => norm_pwr: 31
953[ 0.151553] c0 1 schedtune: configured to support 5 boost groups
954[ 0.163419] c0 1 cpuidle: using governor ladder
955[ 0.176726] c0 1 cpuidle: using governor menu
956[ 0.190058] c0 1 cpuidle: using governor qcom
957[ 0.191872] c0 1 vdso: 2 pages (1 code @ 0000000000000000, 1 data @ 0000000000000000)
958[ 0.191952] c0 1 hw-breakpoint: found 8 breakpoint and 4 watchpoint registers.
959[ 0.192395] c0 1 software IO TLB [mem 0xf6400000-0xf6800000] (4MB) mapped at [0000000000000000-0000000000000000]
960[ 0.193132] c0 1 DMA: preallocated 256 KiB pool for atomic allocations
961[ 0.211869] c0 1 sps:sps is ready.
962[ 0.212545] c0 1 i2c-msm-v2 75ba000.i2c: could not find pctldev for node /soc/pinctrl@01010000/i2c_12/i2c_12_active, deferring probe
963[ 0.213433] c0 1 i2c-msm-v2 75b5000.i2c: could not find pctldev for node /soc/pinctrl@01010000/i2c_7/i2c_7_active, deferring probe
964[ 0.213877] c0 1 i2c-msm-v2 75b6000.i2c: could not find pctldev for node /soc/pinctrl@01010000/i2c_8/i2c_8_active, deferring probe
965[ 0.214297] c0 1 irq: no irq domain found for /soc/pinctrl@01010000 !
966[ 0.215993] c0 1 cpu-clock-8996 6400000.qcom,cpu-clock-8996: resources init failed
967[ 0.282687] c0 1 smd_channel_probe_now: allocation table not initialized
968[ 0.282974] c0 1 smd_channel_probe_now: allocation table not initialized
969[ 0.283249] c0 1 smd_channel_probe_now: allocation table not initialized
970[ 0.283614] c0 1 smd_channel_probe_now: allocation table not initialized
971[ 0.283875] c0 1 msm_watchdog 9830000.qcom,wdt: wdog absent resource not present
972[ 0.284147] c0 1 msm_watchdog 9830000.qcom,wdt: MSM Watchdog Initialized
973[ 0.284615] c0 1 platform 83700000.qcom,msm-rtb: assigned reserved memory node msm_rtb_region@0
974[ 0.285395] c0 1 msm_rpm_dev_probe: APSS-RPM communication over GLINK
975[ 0.293644] c0 1 spmi_pmic_arb 400f000.qcom,spmi: PMIC Arb Version-2 0x20010000
976[ 0.295278] c0 1 spmi_pmic_arb 400f000.qcom,spmi: missing property: qcom,pmic-arb-max-periph-interrupts
977[ 0.300223] c0 1 pmi8994_s2: 400 <--> 1065 mV at 1000 mV normal idle
978[ 0.300949] c0 1 platform 9300000.qcom,lpass: assigned reserved memory node peripheral_region@8ea00000
979[ 0.301510] c0 1 platform ce0000.qcom,venus: assigned reserved memory node peripheral_region@8ea00000
980[ 0.302407] c0 1 platform 1c00000.qcom,ssc: assigned reserved memory node peripheral_region@8ea00000
981[ 0.303072] c0 1 platform 2080000.qcom,mss: assigned reserved memory node modem_region@88800000
982[ 0.306256] c0 1 msm-thermal 70000.qcom,msm-thermal: msm_thermal:Failed reading node=/soc/qcom,msm-thermal, key=qcom,rpm-phase-resource-type err=-22. KTM continues
983[ 0.306279] c0 1 msm-thermal 70000.qcom,msm-thermal: msm_thermal:Failed reading node=/soc/qcom,msm-thermal, key=qcom,gfx-sensor-id. err=-22. KTM continues
984[ 0.306295] c0 1 msm-thermal 70000.qcom,msm-thermal: probe_vdd_mx:Failed reading node=/soc/qcom,msm-thermal, key=qcom,mx-restriction-temp. KTM continues
985[ 0.306308] c0 1 msm-thermal 70000.qcom,msm-thermal: probe_psm:Failed reading node=/soc/qcom,msm-thermal, key=qcom,pmic-sw-mode-temp. err=-22. KTM continues
986[ 0.306417] c0 1 msm_thermal:vdd_restriction_reg_init Defer regulator vdd-dig probe
987[ 0.306425] c0 1 msm_thermal:probe_vdd_rstr Err regulator init. err:-517. KTM continues.
988[ 0.306435] c0 1 msm-thermal 70000.qcom,msm-thermal: probe_vdd_rstr:Failed reading node=/soc/qcom,msm-thermal, key=qcom,max-freq-level. err=-517. KTM continues
989[ 0.317129] c0 1 msm_cache_erp64 6500000.qcom,cache_erp64: Registering for L1 error interrupts
990[ 0.317230] c0 1 msm_cache_erp64 6500000.qcom,cache_erp64: Registering for L2 error interrupts
991[ 0.317386] c0 1 msm_cache_erp64 6500000.qcom,cache_erp64: Registering for L3 error interrupts
992[ 0.317658] c0 1 msm_m4m_erp 9a40000.qcom,m4m_erp64: Registering for M4M error interrupts
993[ 0.319701] c0 1 apc0_pwrcl_mem_acc_corner: 0 <--> 0 mV
994[ 0.320544] c0 4 smd_channel_probe_now: allocation table not initialized
995[ 0.321095] c0 50 msm_rpm_trans_notify_state: glink config params: transport=(null), edge=rpm, name=rpm_requests
996[ 0.321184] c0 1 apc1_perfcl_mem_acc_corner: 0 <--> 0 mV
997[ 0.321588] c0 1 apcc_l3_mem_acc_corner: 0 <--> 0 mV
998[ 0.321912] c0 1 gfx_mem_acc_corner: 0 <--> 0 mV
999[ 0.322338] c0 1 kryo0-retention: 468 <--> 892 mV at 520 mV
1000[ 0.322525] c0 1 kryo0: 468 <--> 892 mV at 754 mV
1001[ 0.322665] c0 1 kryo_regulator_probe: kryo0: default LDO functional volt=754021 uV, LDO retention volt=521789 uV, Vref func=325285 + 4466*(val), cluster-num=0
1002[ 0.322974] c0 1 kryo1-retention: 468 <--> 892 mV at 520 mV
1003[ 0.323155] c0 1 kryo1: 468 <--> 892 mV at 754 mV
1004[ 0.323281] c0 1 kryo_regulator_probe: kryo1: default LDO functional volt=754021 uV, LDO retention volt=521789 uV, Vref func=325285 + 4466*(val), cluster-num=1
1005[ 0.328438] c0 1 platform soc:qcom,kgsl-hyp: assigned reserved memory node peripheral_region@8ea00000
1006[ 0.329974] c0 1 msm_mpm_dev_probe(): Cannot get clk resource for XO: -517
1007[ 0.349987] c0 1 __of_mpm_init(): MPM driver mapping exists
1008[ 0.351304] c0 1 platform 84000000.qcom,rmtfs_rtel_sharedmem: assigned reserved memory node htc_rtel_region@0
1009[ 0.353767] c0 1 console [pstore-1] enabled
1010[ 0.353876] c0 1 pstore: Registered ramoops as persistent store backend
1011[ 0.353887] c0 1 ramoops: attached 0x100000@0x83500000, ecc: 0/0
1012[ 0.355354] c0 1 bootloader_log: allocate buffer for bootloader log, size: 458752
1013[ 0.355576] c0 1 bldr_log_parser: size 18341
1014[ 0.355645] c0 1 bootloader_log: allocate buffer for last bootloader log, size: 458752
1015[ 0.355865] c0 1 bldr_log_parser: size 18799
1016[ 0.365353] c0 1 i2c-msm-v2 7577000.i2c: probing driver i2c-msm-v2
1017[ 0.365500] c0 1 i2c-msm-v2 7577000.i2c: error on clk_get(core_clk):-517
1018[ 0.365514] c0 1 i2c-msm-v2 7577000.i2c: error probe() failed with err:-517
1019[ 0.366829] c0 1 i2c-msm-v2 75b7000.i2c: probing driver i2c-msm-v2
1020[ 0.366959] c0 1 i2c-msm-v2 75b7000.i2c: error on clk_get(core_clk):-517
1021[ 0.366972] c0 1 i2c-msm-v2 75b7000.i2c: error probe() failed with err:-517
1022[ 0.371902] c0 52 i2c-msm-v2 75ba000.i2c: probing driver i2c-msm-v2
1023[ 0.372013] c0 52 i2c-msm-v2 75ba000.i2c: error on clk_get(core_clk):-517
1024[ 0.372027] c0 52 i2c-msm-v2 75ba000.i2c: error probe() failed with err:-517
1025[ 0.372476] c0 52 i2c-msm-v2 75b5000.i2c: probing driver i2c-msm-v2
1026[ 0.372570] c0 52 i2c-msm-v2 75b5000.i2c: error on clk_get(core_clk):-517
1027[ 0.372583] c0 52 i2c-msm-v2 75b5000.i2c: error probe() failed with err:-517
1028[ 0.372958] c0 52 i2c-msm-v2 75b6000.i2c: probing driver i2c-msm-v2
1029[ 0.373046] c0 52 i2c-msm-v2 75b6000.i2c: error on clk_get(core_clk):-517
1030[ 0.373059] c0 52 i2c-msm-v2 75b6000.i2c: error probe() failed with err:-517
1031[ 0.373243] c0 52 cpu-clock-8996 6400000.qcom,cpu-clock-8996: resources init failed
1032[ 0.374082] c0 52 pm8994_s1_corner: 0 <--> 0 mV at 0 mV normal idle
1033[ 0.374523] c0 52 pm8994_s1_floor_corner: 0 <--> 0 mV at 0 mV normal idle
1034[ 0.374905] c0 52 pm8994_s1_corner_ao: 0 <--> 0 mV at 0 mV normal idle
1035[ 0.375334] c0 52 pm8994_s2_corner: 0 <--> 0 mV at 0 mV normal idle
1036[ 0.375714] c0 52 pm8994_s2_corner_ao: 0 <--> 0 mV at 0 mV normal idle
1037[ 0.376130] c0 52 pm8994_s3: 1300 mV normal idle
1038[ 0.376557] c0 52 pm8994_s4: 1800 mV normal idle
1039[ 0.377110] c0 52 pm8994_s5: 2150 mV normal idle
1040[ 0.377540] c0 52 pm8994_s7: 800 mV normal idle
1041[ 0.377964] c0 52 pm8994_l1: 1000 mV normal idle
1042[ 0.378397] c0 52 pm8994_l2: 1250 mV normal idle
1043[ 0.379154] c0 52 pm8994_l3: 1100 mV normal idle
1044[ 0.379592] c0 52 pm8994_l4: 1225 mV normal idle
1045[ 0.380449] c0 52 pm8994_l6: 1800 mV normal idle
1046[ 0.380921] c0 52 pm8994_l8: 1800 mV normal idle
1047[ 0.381343] c0 52 pm8994_l9: 1800 mV normal idle
1048[ 0.381768] c0 52 pm8994_l10: 2850 mV normal idle
1049[ 0.382190] c0 52 pm8994_l11: 1200 mV normal idle
1050[ 0.382612] c0 52 pm8994_l12: 1800 mV normal idle
1051[ 0.383441] c0 52 pm8994_l13: 1800 <--> 2950 mV at 2950 mV normal idle
1052[ 0.383897] c0 52 pm8994_l14: 1800 mV normal idle
1053[ 0.384752] c0 52 pm8994_l15: 1800 mV normal idle
1054[ 0.385177] c0 52 pm8994_l16: 2700 mV normal idle
1055[ 0.385996] c0 52 pm8994_l17: 3300 mV normal idle
1056[ 0.386779] c0 52 pm8994_l18: 1800 <--> 1900 mV at 1800 mV normal idle
1057[ 0.387201] c0 52 pm8994_l18_pin_ctrl: 2700 <--> 2900 mV at 2700 mV normal idle
1058[ 0.387909] c0 52 pm8994_l19: 2850 mV normal idle
1059[ 0.388377] c0 52 pm8994_l20: 2950 mV normal idle
1060[ 0.388979] c0 52 pm8994_l21: 3000 <--> 3300 mV at 3000 mV normal idle
1061[ 0.389593] c0 52 pm8994_l22: 3300 mV normal idle
1062[ 0.390093] c0 52 pm8994_l23: 1800 mV normal idle
1063[ 0.390532] c0 52 pm8994_l24: 3075 mV normal idle
1064[ 0.390958] c0 52 pm8994_l25: 1200 mV normal idle
1065[ 0.391782] c0 52 pm8994_l26_corner: 0 <--> 0 mV at 0 mV normal idle
1066[ 0.392171] c0 52 pm8994_l26_floor_corner: 0 <--> 0 mV at 0 mV normal idle
1067[ 0.392609] c0 52 pm8994_l27: 1000 mV normal idle
1068[ 0.393037] c0 52 pm8994_l28: 925 mV normal idle
1069[ 0.393859] c0 52 pm8994_l29: 3000 mV normal idle
1070[ 0.394298] c0 52 pm8994_l30: 1800 mV normal idle
1071[ 0.394738] c0 52 pm8994_l32: 1800 mV normal idle
1072[ 0.396547] c0 52 pm8994_lvs1: no parameters
1073[ 0.397023] c0 52 pm8994_lvs2: no parameters
1074[ 0.397415] c0 52 pmi8994_s1: 1025 mV normal idle
1075[ 0.397844] c0 52 pmi8994_boost_5v: no parameters
1076[ 0.398019] c0 52 qcom,rpm-smd-regulator soc:qcom,rpm-smd:rpm-regulator-bstb:regulator-bst: Failed to find supply parent
1077[ 0.398118] c0 52 rpm_vreg_device_probe: regulator_register failed: pmi8994_boost_5v, rc=-517
1078[ 0.398451] c0 52 pmi8994_boost_pin_ctrl: no parameters
1079[ 0.398533] c0 52 qcom,rpm-smd-regulator soc:qcom,rpm-smd:rpm-regulator-bstb:regulator-bst-pin-ctrl: Failed to find supply parent
1080[ 0.398624] c0 52 rpm_vreg_device_probe: regulator_register failed: pmi8994_boost_pin_ctrl, rc=-517
1081[ 0.398984] c0 52 pmi8994_boostbypass: 3150 <--> 3600 mV at 3150 mV normal idle
1082[ 0.399325] c0 52 pm8994_s11: 470 <--> 1140 mV at 905 mV normal idle
1083[ 0.399542] c0 52 pm8994_s11_avs_limit: 470 <--> 1140 mV
1084[ 0.399649] c0 52 spm_regulator_probe: name=pm8994_s11, range=LV, voltage=905000 uV, mode=AUTO, step rate=2400 uV/us
1085[ 0.400853] c0 52 msm-thermal 70000.qcom,msm-thermal: msm_thermal:Failed reading node=/soc/qcom,msm-thermal, key=qcom,rpm-phase-resource-type err=-22. KTM continues
1086[ 0.400878] c0 52 msm-thermal 70000.qcom,msm-thermal: msm_thermal:Failed reading node=/soc/qcom,msm-thermal, key=qcom,gfx-sensor-id. err=-22. KTM continues
1087[ 0.400890] c0 52 msm_thermal:sensor_mgr_init_threshold threshold id already initialized
1088[ 0.400904] c0 52 msm-thermal 70000.qcom,msm-thermal: probe_vdd_mx:Failed reading node=/soc/qcom,msm-thermal, key=qcom,mx-restriction-temp. KTM continues
1089[ 0.400918] c0 52 msm-thermal 70000.qcom,msm-thermal: probe_psm:Failed reading node=/soc/qcom,msm-thermal, key=qcom,pmic-sw-mode-temp. err=-22. KTM continues
1090[ 0.401398] c0 52 msm_thermal:vdd_restriction_reg_init Defer regulator vdd-gfx probe
1091[ 0.401414] c0 52 msm_thermal:probe_vdd_rstr Err regulator init. err:-517. KTM continues.
1092[ 0.401427] c0 52 msm-thermal 70000.qcom,msm-thermal: probe_vdd_rstr:Failed reading node=/soc/qcom,msm-thermal, key=qcom,max-freq-level. err=-517. KTM continues
1093[ 0.401975] c0 52 msm_mpm_dev_probe(): Cannot get clk resource for XO: -517
1094[ 0.402836] c0 52 i2c-msm-v2 7577000.i2c: probing driver i2c-msm-v2
1095[ 0.402957] c0 52 i2c-msm-v2 7577000.i2c: error on clk_get(core_clk):-517
1096[ 0.402971] c0 52 i2c-msm-v2 7577000.i2c: error probe() failed with err:-517
1097[ 0.403864] c0 52 i2c-msm-v2 75b7000.i2c: probing driver i2c-msm-v2
1098[ 0.403986] c0 52 i2c-msm-v2 75b7000.i2c: error on clk_get(core_clk):-517
1099[ 0.403998] c0 52 i2c-msm-v2 75b7000.i2c: error probe() failed with err:-517
1100[ 0.404655] c0 52 i2c-msm-v2 75ba000.i2c: probing driver i2c-msm-v2
1101[ 0.404751] c0 52 i2c-msm-v2 75ba000.i2c: error on clk_get(core_clk):-517
1102[ 0.404765] c0 52 i2c-msm-v2 75ba000.i2c: error probe() failed with err:-517
1103[ 0.405182] c0 52 i2c-msm-v2 75b5000.i2c: probing driver i2c-msm-v2
1104[ 0.405270] c0 52 i2c-msm-v2 75b5000.i2c: error on clk_get(core_clk):-517
1105[ 0.405282] c0 52 i2c-msm-v2 75b5000.i2c: error probe() failed with err:-517
1106[ 0.405642] c0 52 i2c-msm-v2 75b6000.i2c: probing driver i2c-msm-v2
1107[ 0.405726] c0 52 i2c-msm-v2 75b6000.i2c: error on clk_get(core_clk):-517
1108[ 0.405738] c0 52 i2c-msm-v2 75b6000.i2c: error probe() failed with err:-517
1109[ 0.406067] c0 52 cpu-clock-8996 6400000.qcom,cpu-clock-8996: resources init failed
1110[ 0.424687] c0 52 qcom,gcc-8996 300000.qcom,gcc: Registered GCC clocks.
1111[ 0.425709] c0 52 vfe0_clk_src: set OPP pair(75000000 Hz: 3 uV) on a10000.qcom,vfe0
1112[ 0.425733] c0 52 vfe0_clk_src: set OPP pair(320000000 Hz: 5 uV) on a10000.qcom,vfe0
1113[ 0.425747] c0 52 vfe0_clk_src: set OPP pair(600000000 Hz: 7 uV) on a10000.qcom,vfe0
1114[ 0.426085] c0 52 vfe1_clk_src: set OPP pair(75000000 Hz: 3 uV) on a14000.qcom,vfe1
1115[ 0.426108] c0 52 vfe1_clk_src: set OPP pair(320000000 Hz: 5 uV) on a14000.qcom,vfe1
1116[ 0.426120] c0 52 vfe1_clk_src: set OPP pair(600000000 Hz: 7 uV) on a14000.qcom,vfe1
1117[ 0.426479] c0 52 cpp_clk_src: set OPP pair(100000000 Hz: 3 uV) on a04000.qcom,cpp
1118[ 0.426495] c0 52 cpp_clk_src: set OPP pair(480000000 Hz: 5 uV) on a04000.qcom,cpp
1119[ 0.426505] c0 52 cpp_clk_src: set OPP pair(640000000 Hz: 7 uV) on a04000.qcom,cpp
1120[ 0.434868] c0 52 qcom,mmsscc-8996 8c0000.qcom,mmsscc: Registered MMSS clocks.
1121[ 0.436894] c0 52 pmi8994_boost_5v: no parameters
1122[ 0.437059] c0 52 qcom,rpm-smd-regulator soc:qcom,rpm-smd:rpm-regulator-bstb:regulator-bst: Failed to find supply parent
1123[ 0.437154] c0 52 rpm_vreg_device_probe: regulator_register failed: pmi8994_boost_5v, rc=-517
1124[ 0.437366] c0 52 pmi8994_boost_pin_ctrl: no parameters
1125[ 0.437435] c0 52 qcom,rpm-smd-regulator soc:qcom,rpm-smd:rpm-regulator-bstb:regulator-bst-pin-ctrl: Failed to find supply parent
1126[ 0.437521] c0 52 rpm_vreg_device_probe: regulator_register failed: pmi8994_boost_pin_ctrl, rc=-517
1127[ 0.438536] c0 52 msm-thermal 70000.qcom,msm-thermal: msm_thermal:Failed reading node=/soc/qcom,msm-thermal, key=qcom,rpm-phase-resource-type err=-22. KTM continues
1128[ 0.438560] c0 52 msm-thermal 70000.qcom,msm-thermal: msm_thermal:Failed reading node=/soc/qcom,msm-thermal, key=qcom,gfx-sensor-id. err=-22. KTM continues
1129[ 0.438572] c0 52 msm_thermal:sensor_mgr_init_threshold threshold id already initialized
1130[ 0.438585] c0 52 msm-thermal 70000.qcom,msm-thermal: probe_vdd_mx:Failed reading node=/soc/qcom,msm-thermal, key=qcom,mx-restriction-temp. KTM continues
1131[ 0.438600] c0 52 msm-thermal 70000.qcom,msm-thermal: probe_psm:Failed reading node=/soc/qcom,msm-thermal, key=qcom,pmic-sw-mode-temp. err=-22. KTM continues
1132[ 0.438841] c0 52 msm_thermal:vdd_restriction_reg_init Defer regulator vdd-gfx probe
1133[ 0.438854] c0 52 msm_thermal:probe_vdd_rstr Err regulator init. err:-517. KTM continues.
1134[ 0.438868] c0 52 msm-thermal 70000.qcom,msm-thermal: probe_vdd_rstr:Failed reading node=/soc/qcom,msm-thermal, key=qcom,max-freq-level. err=-517. KTM continues
1135[ 0.439466] c0 52 cpr3_msm8996_hmss_read_fuse_data: apc0_pwrcl_corner: speed bin = 1
1136[ 0.439482] c0 52 cpr3_msm8996_hmss_read_fuse_data: apc0_pwrcl_corner: CPR fusing revision = 2
1137[ 0.439492] c0 52 cpr3_msm8996_hmss_read_fuse_data: apc0_pwrcl_corner: using redundant fuses = N
1138[ 0.439502] c0 52 cpr3_msm8996_hmss_read_fuse_data: apc0_pwrcl_corner: CPR limitation = none
1139[ 0.439512] c0 52 cpr3_msm8996_hmss_read_fuse_data: apc0_pwrcl_corner: CPR partial binning limitation = none
1140[ 0.439523] c0 52 cpr3_msm8996_hmss_read_fuse_data: apc0_pwrcl_corner: Retention voltage fuses: VDD_MX = 4, VDD_APCC = 4
1141[ 0.439746] c0 52 cpr3_hmss_kvreg_init: apc0_pwrcl_corner: LDO min headroom=80000 uV, LDO max headroom=470000 uV, LDO adj=0 uV, LDO mode=allowed, LDO retention=490000 uV
1142[ 0.439985] c0 52 cpr3_msm8996_hmss_calculate_open_loop_voltages: apc0_pwrcl_corner: fused MinSVS: open-loop= 565000 uV
1143[ 0.439998] c0 52 cpr3_msm8996_hmss_calculate_open_loop_voltages: apc0_pwrcl_corner: fused SVS: open-loop= 625000 uV
1144[ 0.440008] c0 52 cpr3_msm8996_hmss_calculate_open_loop_voltages: apc0_pwrcl_corner: fused NOM: open-loop= 715000 uV
1145[ 0.440129] c0 52 cpr3_msm8996_hmss_calculate_open_loop_voltages: apc0_pwrcl_corner: fused TURBO: open-loop= 850000 uV
1146[ 0.440265] c0 52 cpr3_msm8996_hmss_calculate_target_quotients: apc0_pwrcl_corner: fused MinSVS: quot[ 7]= 284
1147[ 0.440275] c0 52 cpr3_msm8996_hmss_calculate_target_quotients: apc0_pwrcl_corner: fused SVS: quot[ 7]= 390, quot_offset[ 7]= 100
1148[ 0.440285] c0 52 cpr3_msm8996_hmss_calculate_target_quotients: apc0_pwrcl_corner: fused NOM: quot[ 7]= 596, quot_offset[ 7]= 205
1149[ 0.440295] c0 52 cpr3_msm8996_hmss_calculate_target_quotients: apc0_pwrcl_corner: fused TURBO: quot[ 7]= 911, quot_offset[ 7]= 315
1150[ 0.440474] c0 52 cpr3_msm8996_hmss_read_fuse_data: apc0_cbf_corner: speed bin = 1
1151[ 0.440484] c0 52 cpr3_msm8996_hmss_read_fuse_data: apc0_cbf_corner: CPR fusing revision = 2
1152[ 0.440494] c0 52 cpr3_msm8996_hmss_read_fuse_data: apc0_cbf_corner: using redundant fuses = N
1153[ 0.440503] c0 52 cpr3_msm8996_hmss_read_fuse_data: apc0_cbf_corner: CPR limitation = none
1154[ 0.440513] c0 52 cpr3_msm8996_hmss_read_fuse_data: apc0_cbf_corner: CPR partial binning limitation = none
1155[ 0.440524] c0 52 cpr3_msm8996_hmss_read_fuse_data: apc0_cbf_corner: Retention voltage fuses: VDD_MX = 4, VDD_APCC = 4
1156[ 0.440689] c0 52 cpr3_msm8996_hmss_calculate_open_loop_voltages: apc0_cbf_corner: fused MinSVS: open-loop= 565000 uV
1157[ 0.440698] c0 52 cpr3_msm8996_hmss_calculate_open_loop_voltages: apc0_cbf_corner: fused SVS: open-loop= 625000 uV
1158[ 0.440707] c0 52 cpr3_msm8996_hmss_calculate_open_loop_voltages: apc0_cbf_corner: fused NOM: open-loop= 715000 uV
1159[ 0.440716] c0 52 cpr3_msm8996_hmss_calculate_open_loop_voltages: apc0_cbf_corner: fused TURBO: open-loop= 850000 uV
1160[ 0.440728] c0 52 cpr3_msm8996_hmss_calculate_open_loop_voltages: apc0_cbf_corner: fused MinSVS: CBF offset open-loop= 535000 uV
1161[ 0.440736] c0 52 cpr3_msm8996_hmss_calculate_open_loop_voltages: apc0_cbf_corner: fused LowSVS: CBF offset open-loop= 645000 uV
1162[ 0.440745] c0 52 cpr3_msm8996_hmss_calculate_open_loop_voltages: apc0_cbf_corner: fused SVS: CBF offset open-loop= 645000 uV
1163[ 0.440753] c0 52 cpr3_msm8996_hmss_calculate_open_loop_voltages: apc0_cbf_corner: fused NOM: CBF offset open-loop= 765000 uV
1164[ 0.440762] c0 52 cpr3_msm8996_hmss_calculate_open_loop_voltages: apc0_cbf_corner: fused TURBO: CBF offset open-loop= 890000 uV
1165[ 0.440813] c0 52 cpr3_msm8996_hmss_calculate_target_quotients: apc0_cbf_corner: fused MinSVS: quot[ 7]= 284
1166[ 0.440823] c0 52 cpr3_msm8996_hmss_calculate_target_quotients: apc0_cbf_corner: fused SVS: quot[ 7]= 390, quot_offset[ 7]= 100
1167[ 0.440832] c0 52 cpr3_msm8996_hmss_calculate_target_quotients: apc0_cbf_corner: fused NOM: quot[ 7]= 596, quot_offset[ 7]= 205
1168[ 0.440841] c0 52 cpr3_msm8996_hmss_calculate_target_quotients: apc0_cbf_corner: fused TURBO: quot[ 7]= 911, quot_offset[ 7]= 315
1169[ 0.440976] c0 52 cpr3_msm8996_hmss_read_fuse_data: apc1_corner: speed bin = 1
1170[ 0.440986] c0 52 cpr3_msm8996_hmss_read_fuse_data: apc1_corner: CPR fusing revision = 2
1171[ 0.440995] c0 52 cpr3_msm8996_hmss_read_fuse_data: apc1_corner: using redundant fuses = N
1172[ 0.441005] c0 52 cpr3_msm8996_hmss_read_fuse_data: apc1_corner: CPR limitation = none
1173[ 0.441014] c0 52 cpr3_msm8996_hmss_read_fuse_data: apc1_corner: CPR partial binning limitation = none
1174[ 0.441026] c0 52 cpr3_msm8996_hmss_read_fuse_data: apc1_corner: Retention voltage fuses: VDD_MX = 4, VDD_APCC = 4
1175[ 0.441285] c0 52 cpr3_hmss_kvreg_init: apc1_corner: LDO min headroom=130000 uV, LDO max headroom=470000 uV, LDO adj=0 uV, LDO mode=allowed, LDO retention=490000 uV
1176[ 0.441528] c0 52 cpr3_msm8996_hmss_calculate_open_loop_voltages: apc1_corner: fused MinSVS: open-loop= 605000 uV
1177[ 0.441540] c0 52 cpr3_msm8996_hmss_calculate_open_loop_voltages: apc1_corner: fused SVS: open-loop= 665000 uV
1178[ 0.441550] c0 52 cpr3_msm8996_hmss_calculate_open_loop_voltages: apc1_corner: fused NOM: open-loop= 735000 uV
1179[ 0.441559] c0 52 cpr3_msm8996_hmss_calculate_open_loop_voltages: apc1_corner: fused TURBO: open-loop= 930000 uV
1180[ 0.441714] c0 52 cpr3_msm8996_hmss_calculate_target_quotients: apc1_corner: fused MinSVS: quot[ 7]= 365
1181[ 0.441725] c0 52 cpr3_msm8996_hmss_calculate_target_quotients: apc1_corner: fused SVS: quot[ 7]= 479, quot_offset[ 7]= 110
1182[ 0.441735] c0 52 cpr3_msm8996_hmss_calculate_target_quotients: apc1_corner: fused NOM: quot[ 7]= 640, quot_offset[ 7]= 160
1183[ 0.441745] c0 52 cpr3_msm8996_hmss_calculate_target_quotients: apc1_corner: fused TURBO: quot[ 7]=1074, quot_offset[ 7]= 430
1184[ 0.442303] cpr3_regulator_init_ctrl: apcc: Default CPR mode = SW closed-loop
1185[ 0.442453] c0 52 apc0_pwrcl_corner: 0 <--> 0 mV at 0 mV
1186[ 0.442675] c0 52 apc0_cbf_corner: 0 <--> 0 mV at 0 mV
1187[ 0.445351] c0 52 cpr3_regulator_measure_aging: apcc: average quotient delta=-15 (count=10)
1188[ 0.445385] c0 52 cpr3_regulator_aging_adjust: apcc: aging measurement successful; aging reference adjustment voltage=1562 uV
1189[ 0.445553] c0 52 apc1_corner: 0 <--> 0 mV at 0 mV
1190[ 0.447562] c0 52 cpr3_msm8996_mmss_read_fuse_data: gfx_corner: speed bin = 1
1191[ 0.447584] c0 52 cpr3_msm8996_mmss_read_fuse_data: gfx_corner: CPR fusing revision = 1
1192[ 0.447595] c0 52 cpr3_msm8996_mmss_read_fuse_data: gfx_corner: CPR limitation = none
1193[ 0.448072] c0 52 cpr3_msm8996_mmss_calculate_open_loop_voltages: gfx_corner: fuse_corner[0] open-loop= 620000 uV
1194[ 0.448084] c0 52 cpr3_msm8996_mmss_calculate_open_loop_voltages: gfx_corner: fuse_corner[1] open-loop= 665000 uV
1195[ 0.448093] c0 52 cpr3_msm8996_mmss_calculate_open_loop_voltages: gfx_corner: fuse_corner[2] open-loop= 785000 uV
1196[ 0.448102] c0 52 cpr3_msm8996_mmss_calculate_open_loop_voltages: gfx_corner: fuse_corner[3] open-loop= 925000 uV
1197[ 0.448330] cpr3_regulator_init_ctrl: gfx: Default CPR mode = closed-loop
1198[ 0.448475] c0 52 gfx_corner: 0 <--> 0 mV at 0 mV
1199[ 0.453841] c0 52 i2c-msm-v2 7577000.i2c: probing driver i2c-msm-v2
1200[ 0.454002] AXI: msm_bus_scale_register_client(): msm_bus_scale_register_client: Bus driver not ready.
1201[ 0.454014] c0 52 i2c-msm-v2 7577000.i2c: msm_bus_scale_register_client(mstr-id:86):0 (not a problem)
1202[ 0.463043] c0 52 i2c-msm-v2 75b7000.i2c: probing driver i2c-msm-v2
1203[ 0.463179] AXI: msm_bus_scale_register_client(): msm_bus_scale_register_client: Bus driver not ready.
1204[ 0.463192] c0 52 i2c-msm-v2 75b7000.i2c: msm_bus_scale_register_client(mstr-id:84):0 (not a problem)
1205[ 0.465183] c0 52 i2c-msm-v2 75ba000.i2c: probing driver i2c-msm-v2
1206[ 0.465306] AXI: msm_bus_scale_register_client(): msm_bus_scale_register_client: Bus driver not ready.
1207[ 0.465317] c0 52 i2c-msm-v2 75ba000.i2c: msm_bus_scale_register_client(mstr-id:84):0 (not a problem)
1208[ 0.467042] c0 52 i2c-msm-v2 75b5000.i2c: probing driver i2c-msm-v2
1209[ 0.467163] AXI: msm_bus_scale_register_client(): msm_bus_scale_register_client: Bus driver not ready.
1210[ 0.467175] c0 52 i2c-msm-v2 75b5000.i2c: msm_bus_scale_register_client(mstr-id:84):0 (not a problem)
1211[ 0.468809] c0 52 i2c-msm-v2 75b6000.i2c: probing driver i2c-msm-v2
1212[ 0.468930] AXI: msm_bus_scale_register_client(): msm_bus_scale_register_client: Bus driver not ready.
1213[ 0.468942] c0 52 i2c-msm-v2 75b6000.i2c: msm_bus_scale_register_client(mstr-id:84):0 (not a problem)
1214[ 0.470586] c0 52 cpu-clock-8996 6400000.qcom,cpu-clock-8996: using perf/pwr/cbf speed bin 1 and pvs_ver 0
1215[ 0.472671] c0 52 clock-cpu-8996: set OPP pair (307200000 Hz, 555000 uv) on cpu0
1216[ 0.472723] c0 52 clock-cpu-8996: set OPP pair (1593600000 Hz, 780000 uv) on cpu0
1217[ 0.472743] c0 52 clock-cpu-8996: set OPP pair (307200000 Hz, 555000 uv) on cpu1
1218[ 0.472779] c0 52 clock-cpu-8996: set OPP pair (1593600000 Hz, 780000 uv) on cpu1
1219[ 0.472799] c0 52 clock-cpu-8996: set OPP pair (307200000 Hz, 595000 uv) on cpu2
1220[ 0.472906] c0 52 clock-cpu-8996: set OPP pair (2150400000 Hz, 905000 uv) on cpu2
1221[ 0.472927] c0 52 clock-cpu-8996: set OPP pair (307200000 Hz, 595000 uv) on cpu3
1222[ 0.472977] c0 52 clock-cpu-8996: set OPP pair (2150400000 Hz, 905000 uv) on cpu3
1223[ 0.473171] c0 52 clock-cpu-8996: set OPP pair (192000000 Hz, 540000 uv) on soc:qcom,m4m
1224[ 0.473214] c0 52 clock-cpu-8996: set OPP pair (1593600000 Hz, 895000 uv) on soc:qcom,m4m
1225[ 0.473890] c0 52 qcom,gpucc-8996 8c0000.qcom,gpucc: using speed bin 1
1226[ 0.474343] c0 52 gfx3d_clk_src_v2: set OPP pair(133000000 Hz: 550000 uV) on b00000.qcom,kgsl-3d0
1227[ 0.474372] c0 52 gfx3d_clk_src_v2: set OPP pair(624000000 Hz: 880000 uV) on b00000.qcom,kgsl-3d0
1228[ 0.475810] c0 52 qcom,gpucc-8996 8c0000.qcom,gpucc: Registered GPU clocks.
1229[ 0.476058] c0 52 pmi8994_boost_5v: no parameters
1230[ 0.476161] c0 52 qcom,rpm-smd-regulator soc:qcom,rpm-smd:rpm-regulator-bstb:regulator-bst: Failed to find supply parent
1231[ 0.476259] c0 52 rpm_vreg_device_probe: regulator_register failed: pmi8994_boost_5v, rc=-517
1232[ 0.476475] c0 52 pmi8994_boost_pin_ctrl: no parameters
1233[ 0.476544] c0 52 qcom,rpm-smd-regulator soc:qcom,rpm-smd:rpm-regulator-bstb:regulator-bst-pin-ctrl: Failed to find supply parent
1234[ 0.476630] c0 52 rpm_vreg_device_probe: regulator_register failed: pmi8994_boost_pin_ctrl, rc=-517
1235[ 0.477790] c0 52 msm-thermal 70000.qcom,msm-thermal: msm_thermal:Failed reading node=/soc/qcom,msm-thermal, key=qcom,rpm-phase-resource-type err=-22. KTM continues
1236[ 0.477815] c0 52 msm-thermal 70000.qcom,msm-thermal: msm_thermal:Failed reading node=/soc/qcom,msm-thermal, key=qcom,gfx-sensor-id. err=-22. KTM continues
1237[ 0.477826] c0 52 msm_thermal:sensor_mgr_init_threshold threshold id already initialized
1238[ 0.477840] c0 52 msm-thermal 70000.qcom,msm-thermal: probe_vdd_mx:Failed reading node=/soc/qcom,msm-thermal, key=qcom,mx-restriction-temp. KTM continues
1239[ 0.477853] c0 52 msm-thermal 70000.qcom,msm-thermal: probe_psm:Failed reading node=/soc/qcom,msm-thermal, key=qcom,pmic-sw-mode-temp. err=-22. KTM continues
1240[ 0.478173] c0 52 msm_thermal:update_cpu_freq Unable to update policy for cpu:0. err:-19
1241[ 0.478187] c0 52 msm_thermal:update_cpu_freq Unable to update policy for cpu:2. err:-19
1242[ 0.478198] c0 52 msm_thermal:update_cpu_freq Unable to update policy for cpu:2. err:-19
1243[ 0.478218] c0 52 msm-thermal 70000.qcom,msm-thermal: probe_ocr:Failed reading node=/soc/qcom,msm-thermal, key=qcom,pmic-opt-curr-temp err:-22. KTM continues
1244[ 0.479282] c0 4 msm_thermal:update_cpu_freq Unable to update policy for cpu:0. err:-19
1245[ 0.479350] c0 4 msm_thermal:update_cpu_freq Unable to update policy for cpu:2. err:-19
1246[ 0.479362] c0 4 msm_thermal:update_cpu_freq Unable to update policy for cpu:2. err:-19
1247[ 0.479618] c0 52 pmi8994_boost_5v: no parameters
1248[ 0.479742] c0 52 qcom,rpm-smd-regulator soc:qcom,rpm-smd:rpm-regulator-bstb:regulator-bst: Failed to find supply parent
1249[ 0.479841] c0 52 rpm_vreg_device_probe: regulator_register failed: pmi8994_boost_5v, rc=-517
1250[ 0.480233] c0 52 pmi8994_boost_pin_ctrl: no parameters
1251[ 0.480337] c0 52 qcom,rpm-smd-regulator soc:qcom,rpm-smd:rpm-regulator-bstb:regulator-bst-pin-ctrl: Failed to find supply parent
1252[ 0.480427] c0 52 rpm_vreg_device_probe: regulator_register failed: pmi8994_boost_pin_ctrl, rc=-517
1253[ 0.528550] c0 1 KPI: Bootloader start count = 26364
1254[ 0.528569] c0 1 KPI: Bootloader end count = 9585737
1255[ 0.528578] c0 1 KPI: Bootloader display count = 42057
1256[ 0.528586] c0 1 KPI: Bootloader load kernel count = 209757328
1257[ 0.528596] c0 1 KPI: Kernel MPM timestamp = 9612631
1258[ 0.528603] c0 1 KPI: Kernel MPM Clock frequency = 32768
1259[ 0.528625] c0 1 socinfo_print: v0.11, id=305, ver=1.1, raw_id=95, raw_ver=1, hw_plat=1, hw_plat_ver=65536
1260[ 0.528625] c0 1 accessory_chip=0, hw_plat_subtype=0, pmic_model=65545, pmic_die_revision=131072 foundry_id=3 serial_number=2834802767 num_pmics=2
1261[ 0.528942] c0 1 gdsc_mmagic_bimc: no parameters
1262[ 0.529849] c0 1 usb_otg_vreg: no parameters
1263[ 0.529928] c0 1 reg-fixed-voltage soc:usb-otg-switch: Failed to find supply vin
1264[ 0.530095] c0 1 reg-fixed-voltage soc:usb-otg-switch: Failed to register regulator: -517
1265[ 0.530292] c0 1 rome_vreg: no parameters
1266[ 0.532780] c0 1 SCSI subsystem initialized
1267[ 0.534239] c0 1 usbcore: registered new interface driver usbfs
1268[ 0.534301] c0 1 usbcore: registered new interface driver hub
1269[ 0.534458] c0 1 usbcore: registered new device driver usb
1270[ 0.534996] c0 1 soc:usb_nop_phy supply vcc not found, using dummy regulator
1271[ 0.535874] c0 1 media: Linux media interface: v0.10
1272[ 0.535928] c0 1 Linux video capture interface: v2.00
1273[ 0.538440] c0 1 cpufreq: driver msm up and running
1274[ 0.540008] c0 1 platform soc:qcom,ion:qcom,ion-heap@27: assigned reserved memory node qseecom_region
1275[ 0.540813] c0 1 platform soc:qcom,ion:qcom,ion-heap@10: assigned reserved memory node secure_region
1276[ 0.541560] c0 1 ION heap system created
1277[ 0.541693] c0 1 ion_heap_create: Heap type is disabled: 1
1278[ 0.541702] c0 1 msm_ion_heap_create: error creating heap kmalloc type 1 base 0x0000000000000000 size 0
1279[ 0.541708] c0 1 ION heap adsp created at 0x0000000000000000 with size 2000000
1280[ 0.541718] c0 1 ION heap qsecom created at 0x0000000000000000 with size 1400000
1281[ 0.541728] c0 1 ION heap secure_display created at 0x0000000000000000 with size 5c00000
1282[ 0.541737] c0 1 ION heap secure_heap created
1283[ 0.542813] c0 1 msm_bus_fabric_init_driver
1284[ 0.546957] c0 1 msm-bus-type fab-a0noc: Error: Failed to get regulator bus-gdsc:-517
1285[ 0.546976] c0 1 msm-bus-type fab-a0noc: Error: Failed to get regulator bus-a-gdsc:-517
1286[ 0.550622] c0 1 msm-bus-type slv-vmem-cfg: Error: Failed to get regulator node-gdsc:-517
1287[ 0.551213] c0 1 msm-bus-type slv-vmem: Error: Failed to get regulator node-gdsc:-517
1288[ 0.558660] c0 1 msm-bus-type fab-a0noc: Error: Failed to get regulator aggre0-snoc-axi-no-rate:-517
1289[ 0.558679] c0 1 msm-bus-type fab-a0noc: Error: Failed to get regulator aggre0-snoc-axi-no-rate:-517
1290[ 0.558692] c0 1 msm-bus-type fab-a0noc: Error: Failed to get regulator aggre0-snoc-axi-no-rate:-517
1291[ 0.558820] c0 1 msm-bus-type fab-mnoc: Error: Failed to get regulator mmagic-mdss-axi-no-rate:-517
1292[ 0.558846] c0 1 msm-bus-type fab-mnoc: Error: Failed to get regulator mmagic-mdss-axi-no-rate:-517
1293[ 0.558871] c0 1 msm-bus-type fab-mnoc: Error: Failed to get regulator mmagic-mdss-axi-no-rate:-517
1294[ 0.558895] c0 1 msm-bus-type fab-mnoc: Error: Failed to get regulator mmagic-mdss-axi-no-rate:-517
1295[ 0.558918] c0 1 msm-bus-type fab-mnoc: Error: Failed to get regulator mmagic-mdss-axi-no-rate:-517
1296[ 0.558941] c0 1 msm-bus-type fab-mnoc: Error: Failed to get regulator mmagic-mdss-axi-no-rate:-517
1297[ 0.558964] c0 1 msm-bus-type fab-mnoc: Error: Failed to get regulator mmagic-mdss-axi-no-rate:-517
1298[ 0.561734] c0 1 qcom,qpnp-power-on qpnp-power-on-2: PMIC@SID0 Power-on reason: Triggered from Hard Reset and 'cold' boot
1299[ 0.561761] c0 1 qcom,qpnp-power-on qpnp-power-on-2: PMIC@SID0: Power-off reason: Triggered from PS_HOLD (PS_HOLD/MSM controlled shutdown)
1300[ 0.561926] c0 1 input: qpnp_pon as /devices/virtual/input/input0
1301[ 0.562623] c0 1 pon_spare_reg: no parameters
1302[ 0.562694] c0 1 qcom,qpnp-power-on qpnp-power-on-11: No PON config. specified
1303[ 0.562754] c0 1 qcom,qpnp-power-on qpnp-power-on-11: PMIC@SID2 Power-on reason: Triggered from USB (USB charger insertion) and 'cold' boot
1304[ 0.562771] c0 1 qcom,qpnp-power-on qpnp-power-on-11: PMIC@SID2: Power-off reason: Triggered from PS_HOLD (PS_HOLD/MSM controlled shutdown)
1305[ 0.562948] c0 1 PMIC@SID0: PM8994 v2.0 options: 0, 0, 2, 2
1306[ 0.563042] c0 1 PMIC@SID2: PMI8996 v1.1 options: 0, 0, 0, 0
1307[ 0.564699] c0 1 ipa ipa2_uc_state_check:296 uC interface not initialized
1308[ 0.564716] c0 1 ipa ipa_sps_irq_control_all:937 EP (2) not allocated.
1309[ 0.564722] c0 1 ipa ipa_sps_irq_control_all:937 EP (5) not allocated.
1310[ 0.566648] sps:BAM 0x0000000000000000 is registered.
1311[ 0.568016] c1 1 ipa ipa2_uc_state_check:296 uC interface not initialized
1312[ 0.568266] c1 1 sps:BAM 0x0000000000000000 (va:0x0000000000000000) enabled: ver:0x27, number of pipes:20
1313[ 0.570367] c1 1 ipa ipa2_uc_state_check:296 uC interface not initialized
1314[ 0.579498] c1 1 ipa ipa2_uc_state_check:296 uC interface not initialized
1315[ 0.581956] c1 1 IPA driver initialization was successful.
1316[ 0.583649] c1 1 gdsc_mmagic_video: no parameters
1317[ 0.584089] c1 1 gdsc_mmagic_mdss: no parameters
1318[ 0.584375] c1 1 gdsc_mmagic_camss: no parameters
1319[ 0.584657] c1 1 gdsc_venus: no parameters
1320[ 0.584684] c1 1 gdsc_venus: supplied by gdsc_mmagic_video
1321[ 0.584944] c1 1 gdsc_venus_core0: fast normal
1322[ 0.585165] c1 1 gdsc_venus_core1: fast normal
1323[ 0.585425] c1 1 gdsc_camss_top: no parameters
1324[ 0.585458] c1 1 gdsc_camss_top: supplied by gdsc_mmagic_camss
1325[ 0.585705] c1 1 gdsc_vfe0: no parameters
1326[ 0.585730] c1 1 gdsc_vfe0: supplied by gdsc_camss_top
1327[ 0.585998] c1 1 gdsc_vfe1: no parameters
1328[ 0.586024] c1 1 gdsc_vfe1: supplied by gdsc_camss_top
1329[ 0.586297] c1 1 gdsc_mdss: no parameters
1330[ 0.586327] c1 1 gdsc_mdss: supplied by gdsc_mmagic_mdss
1331[ 0.586875] c1 1 gdsc_jpeg: no parameters
1332[ 0.586914] c1 1 gdsc_jpeg: supplied by gdsc_camss_top
1333[ 0.587218] c1 1 gdsc_cpp: no parameters
1334[ 0.587244] c1 1 gdsc_cpp: supplied by gdsc_camss_top
1335[ 0.587442] c1 1 gdsc_pcie_0: no parameters
1336[ 0.587612] c1 1 gdsc_pcie_1: no parameters
1337[ 0.587797] c1 1 gdsc_pcie_2: no parameters
1338[ 0.587956] c1 1 gdsc_usb30: no parameters
1339[ 0.588138] c1 1 gdsc_ufs: no parameters
1340[ 0.588477] c1 1 gdsc_fd: no parameters
1341[ 0.588508] c1 1 gdsc_fd: supplied by gdsc_camss_top
1342[ 0.588748] c1 1 gdsc_gpu: no parameters
1343[ 0.589007] c1 1 gdsc_gpu_gx: no parameters
1344[ 0.589386] c1 1 gdsc_gpu_gx: supplied by gfx_corner
1345[ 0.589725] c1 1 gdsc_hlos1_vote_aggre0_noc: no parameters
1346[ 0.589892] c1 1 gdsc_hlos1_vote_lpass_adsp: no parameters
1347[ 0.590229] c1 1 gdsc_hlos1_vote_lpass_core: no parameters
1348[ 0.590411] c1 1 gdsc_aggre0_noc: no parameters
1349[ 0.592992] c1 1 mdss_pll_probe: MDSS pll label = MDSS DSI 0 PLL
1350[ 0.593033] c1 1 mdss_pll_probe: mdss_pll_probe: label=MDSS DSI 0 PLL PLL SSC enabled
1351[ 0.596093] c1 1 dsi_pll_clock_register_8996: Registered DSI PLL ndx=0 clocks successfully
1352[ 0.596245] c1 1 mdss_pll_probe: MDSS pll label = MDSS DSI 1 PLL
1353[ 0.596259] c1 1 mdss_pll_probe: mdss_pll_probe: label=MDSS DSI 1 PLL PLL SSC enabled
1354[ 0.597466] c1 1 pll_is_pll_locked_8996: DSI PLL ndx=1 status=0 failed to Lock
1355[ 0.598110] c1 1 dsi_pll_clock_register_8996: Registered DSI PLL ndx=1 clocks successfully
1356[ 0.598190] c1 1 mdss_pll_probe: MDSS pll label = MDSS HDMI PLL
1357[ 0.598202] c1 1 mdss_pll_probe: Unable to get the cell-index rc=-22
1358[ 0.771936] c1 1 Advanced Linux Sound Architecture Driver Initialized.
1359[ 0.772604] Bluetooth: 0000000000000000
1360[ 0.772652] c1 1 NET: Registered protocol family 31
1361[ 0.772663] Bluetooth: 0000000000000000
1362[ 0.772678] c1 1 Bluetooth: 0000000000000000Bluetooth: 0000000000000000
1363[ 0.772723] c1 1 Bluetooth: 0000000000000000[ 0.773538] c1 18 cfg80211: Calling CRDA to update world regulatory domain
1364[ 0.773595] c1 18 cfg80211: World regulatory domain updated:
1365[ 0.773604] cfg80211: DFS Master region: unset
1366[ 0.773613] c1 18 cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
1367[ 0.773627] c1 18 cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
1368[ 0.773635] c1 18 cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
1369[ 0.773643] c1 18 cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A, 2000 mBm), (N/A)
1370[ 0.773650] c1 18 cfg80211: (5170000 KHz - 5250000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A)
1371[ 0.773657] c1 18 cfg80211: (5250000 KHz - 5330000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A)
1372[ 0.773664] c1 18 cfg80211: (5490000 KHz - 5710000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A)
1373[ 0.773673] c1 18 cfg80211: (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A)
1374[ 0.773680] c1 18 cfg80211: (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm), (N/A)
1375[ 0.774045] c1 1 pcie:pcie_init.
1376[ 0.778735] c1 1 600000.qcom,pcie supply vreg-3.3 not found, using dummy regulator
1377[ 0.782525] c1 1 msm_pcie_get_resources: PCIe: RC0 can't get tcsr resource.
1378[ 0.785935] c1 52 pmi8994_boost_5v: no parameters
1379[ 0.786413] c1 52 pmi8994_boost_5v: supplied by pon_spare_reg
1380[ 0.787104] c1 52 pmi8994_boost_pin_ctrl: no parameters
1381[ 0.787351] c1 52 pmi8994_boost_pin_ctrl: supplied by pon_spare_reg
1382[ 0.787976] c1 52 ibb_reg: 4600 <--> 6000 mV at 5500 mV
1383[ 0.788360] c1 52 lab_reg: 4600 <--> 6000 mV at 5500 mV
1384[ 0.789001] c1 52 usb_otg_vreg: no parameters
1385[ 0.789145] c1 52 reg-fixed-voltage soc:usb-otg-switch: Failed to find supply vin
1386[ 0.789262] c1 52 reg-fixed-voltage soc:usb-otg-switch: Failed to register regulator: -517
1387[ 0.790658] c0 1 Switched to clocksource arch_sys_counter
1388[ 0.821943] c0 1 bcl_peripheral:bcl_perph_init BCL Initialized
1389[ 0.831774] c0 1 NET: Registered protocol family 2
1390[ 0.832617] c0 1 TCP established hash table entries: 32768 (order: 6, 262144 bytes)
1391[ 0.832724] c0 1 TCP bind hash table entries: 32768 (order: 7, 524288 bytes)
1392[ 0.833256] c0 1 TCP: Hash tables configured (established 32768 bind 32768)
1393[ 0.833646] c0 1 TCP: reno registered
1394[ 0.833710] c0 1 UDP hash table entries: 2048 (order: 4, 65536 bytes)
1395[ 0.833758] c0 1 UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
1396[ 0.834162] c0 1 NET: Registered protocol family 1
1397[ 0.835453] c1 52 usb_otg_vreg: no parameters
1398[ 0.835622] c1 52 reg-fixed-voltage soc:usb-otg-switch: Failed to find supply vin
1399[ 0.835740] c1 52 reg-fixed-voltage soc:usb-otg-switch: Failed to register regulator: -517
1400[ 0.836419] c0 1 Trying to unpack rootfs image as initramfs...
1401[ 1.198224] c0 1 Freeing initrd memory: 11076K (0000000000000000 - 0000000000000000)
1402[ 1.201181] c0 1 kryo perfevents: CPU pmu for kryo-pmuv3 detected
1403[ 1.208276] c1 1 futex hash table entries: 1024 (order: 5, 131072 bytes)
1404[ 1.208423] c1 1 Initialise system trusted keyring
1405[ 1.208528] c1 1 audit: initializing netlink subsys (disabled)
1406[ 1.208650] c1 1 audit: type=2000 audit(1.206:1): initialized
1407[ 1.209700] c1 1 vmscan: error setting kswapd cpu affinity mask
1408[ 1.213657] c1 1 VFS: Disk quotas dquot_6.5.2
1409[ 1.213842] c1 1 Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
1410[ 1.215109] c1 1 Registering sdcardfs 0.1
1411[ 1.215390] c1 1 fuse init (API version 7.23)
1412[ 1.216037] c1 1 pfk [pfk_init]: Driver initialized successfully
1413[ 1.218604] c1 1 Key type asymmetric registered
1414[ 1.218638] c1 1 Asymmetric key parser 'x509' registered
1415[ 1.218649] c1 1 Key type pkcs7_test registered
1416[ 1.218943] c1 1 Block layer SCSI generic (bsg) driver version 0.4 loaded (major 245)
1417[ 1.218962] c1 1 io scheduler noop registered
1418[ 1.218974] c1 1 io scheduler deadline registered
1419[ 1.219095] c1 1 io scheduler cfq registered (default)
1420[ 1.219108] c1 1 io scheduler test-iosched registered
1421[ 1.239256] c1 1 mdss_mdp_irq_clk_register: unable to get clk: lut_clk
1422[ 1.241267] c1 1 No change in context(0==0), skip
1423[ 1.242450] c1 1 mdss_mdp_pipe_addr_setup: type:0 ftchid:-1 xinid:0 num:0 rect:0 ndx:0x1 prio:0
1424[ 1.242462] c1 1 mdss_mdp_pipe_addr_setup: type:0 ftchid:-1 xinid:4 num:1 rect:0 ndx:0x2 prio:1
1425[ 1.242469] c1 1 mdss_mdp_pipe_addr_setup: type:0 ftchid:-1 xinid:8 num:2 rect:0 ndx:0x4 prio:2
1426[ 1.242476] c1 1 mdss_mdp_pipe_addr_setup: type:0 ftchid:-1 xinid:12 num:8 rect:0 ndx:0x100 prio:3
1427[ 1.242492] c1 1 mdss_mdp_pipe_addr_setup: type:1 ftchid:-1 xinid:1 num:3 rect:0 ndx:0x8 prio:4
1428[ 1.242499] c1 1 mdss_mdp_pipe_addr_setup: type:1 ftchid:-1 xinid:5 num:4 rect:0 ndx:0x10 prio:5
1429[ 1.242506] c1 1 mdss_mdp_pipe_addr_setup: type:1 ftchid:-1 xinid:9 num:5 rect:0 ndx:0x20 prio:6
1430[ 1.242512] c1 1 mdss_mdp_pipe_addr_setup: type:1 ftchid:-1 xinid:13 num:9 rect:0 ndx:0x200 prio:7
1431[ 1.242527] c1 1 mdss_mdp_pipe_addr_setup: type:2 ftchid:-1 xinid:2 num:6 rect:0 ndx:0x40 prio:8
1432[ 1.242534] c1 1 mdss_mdp_pipe_addr_setup: type:2 ftchid:-1 xinid:10 num:7 rect:0 ndx:0x80 prio:9
1433[ 1.242547] c1 1 mdss_mdp_pipe_addr_setup: type:3 ftchid:-1 xinid:7 num:10 rect:0 ndx:0x400 prio:0
1434[ 1.242554] c1 1 mdss_mdp_pipe_addr_setup: type:3 ftchid:-1 xinid:7 num:11 rect:0 ndx:0x800 prio:1
1435[ 1.242564] c1 1 mdss_mdp_parse_dt_handler: Error from prop qcom,mdss-pipe-sw-reset-off : u32 array read
1436[ 1.242636] c1 1 mdss_mdp_parse_dt_handler: Error from prop qcom,mdss-ib-factor-overlap : u32 array read
1437[ 1.243273] c1 1 xlog_status: enable:1, panic:1, dump:2
1438[ 1.243751] c1 1 OF: no ranges; cannot translate
1439[ 1.243770] c1 1 OF: no ranges; cannot translate
1440[ 1.244555] c1 1 OF: no ranges; cannot translate
1441[ 1.244573] c1 1 OF: no ranges; cannot translate
1442[ 1.244965] c1 1 OF: no ranges; cannot translate
1443[ 1.244982] c1 1 OF: no ranges; cannot translate
1444[ 1.245361] c1 1 OF: no ranges; cannot translate
1445[ 1.245377] c1 1 OF: no ranges; cannot translate
1446[ 1.245792] c1 1 mdss_mdp_probe: mdss version = 0x10070002, bootloader display is on, num 1, intf_sel=0x00010100
1447[ 1.247797] c1 1 mdss_rotator_init_queue: work thread name=rot_thread_0
1448[ 1.248085] c1 1 mdss_rotator_init_queue: work thread name=rot_thread_1
1449[ 1.253159] c1 1 mdss_smmu_probe: iommu v2 domain[0] mapping and clk register successful!
1450[ 1.253500] c1 1 mdss_smmu_probe: iommu v2 domain[1] mapping and clk register successful!
1451[ 1.253681] c1 1 mdss_smmu_probe: iommu v2 domain[2] mapping and clk register successful!
1452[ 1.253838] c1 1 mdss_smmu_probe: iommu v2 domain[3] mapping and clk register successful!
1453[ 1.257861] c1 1 mdss_dsi_ctrl_probe: DSI Ctrl name = MDSS DSI CTRL->0
1454[ 1.258320] c1 1 mdss_dsi_find_panel_of_node: cmdline:0:qcom,mdss_dsi_samsung_s6e3ha3_wqhd_cmd:1:qcom,mdss_dsi_samsung_s6e3ha3_wqhd_cmd:cfg:split_dsi panel_name:qcom,mdss_dsi_samsung_s6e3ha3_wqhd_cmd
1455[ 1.258341] c1 1 mdss_dsi_panel_init: Panel Name = M1 WQHD SAMSUNG S6E3HA3 5.5 command mode panel
1456[ 1.258438] c1 1 mdss_dsi_panel_timing_from_dt: found new timing "qcom,mdss_dsi_samsung_s6e3ha3_wqhd_cmd" (0000000000000000)
1457[ 1.258462] c1 1 mdss_dsi_parse_dcs_cmds: failed, key=qcom,mdss-dsi-post-panel-on-command
1458[ 1.258470] c1 1 mdss_dsi_parse_dcs_cmds: failed, key=qcom,mdss-dsi-timing-switch-command
1459[ 1.258477] c1 1 mdss_dsi_panel_get_dsc_cfg_np: cannot find dsc config node:
1460[ 1.258545] c1 1 mdss_dsi_parse_panel_features: partial_update_enabled=0
1461[ 1.258554] c1 1 mdss_dsi_parse_panel_features: ulps feature disabled
1462[ 1.258562] mdss_dsi_parse_panel_features: ulps during suspend feature disabled
1463[ 1.258570] c1 1 mdss_dsi_parse_dms_config: dynamic switch feature enabled: 0
1464[ 1.258584] c1 1 mdss_dsi_parse_dcs_cmds: failed, key=qcom,mdss-dsi-panel-status-command
1465[ 1.258631] c1 1 mdss_dsi_parse_rgb_gain: PA[0] = 0x0
1466[ 1.258636] c1 1 mdss_dsi_parse_rgb_gain: PA[1] = 0x0
1467[ 1.258641] c1 1 mdss_dsi_parse_rgb_gain: PA[2] = 0x0
1468[ 1.258646] c1 1 mdss_dsi_parse_rgb_gain: PA[3] = 0x0
1469[ 1.258652] c1 1 mdss_dsi_parse_rgb_gain: R = 0x0, G = 0x0 B = 0x0
1470[ 1.258904] c1 1 mdss_dsi_parse_ctrl_params:3904 Unable to read qcom,display-id, data=0000000000000000,len=20
1471[ 1.259084] c1 1 mdss_dsi_parse_gpio_params: bklt_en gpio not specified
1472[ 1.259146] c1 1 msm_dss_get_res_byname: 'dsi_phy_regulator' resource not found
1473[ 1.259168] c1 1 mdss_dsi_retrieve_ctrl_resources+0xc4/0x228->msm_dss_ioremap_byname: 'dsi_phy_regulator' msm_dss_get_res_byname failed
1474[ 1.259175] c1 1 mdss_dsi_retrieve_ctrl_resources: ctrl_base=0000000000000000 ctrl_size=400 phy_base=0000000000000000 phy_size=588
1475[ 1.259490] c1 1 dsi_panel_device_register: Continuous splash enabled
1476[ 1.260271] c1 1 mdss_register_panel: adding framebuffer device 994000.qcom,mdss_dsi_ctrl0
1477[ 1.282666] c1 1 ERR_FG request IRQ
1478[ 1.282999] c1 1 mdss_dsi_ctrl_probe: Dsi Ctrl->0 initialized, DSI rev:0x10040001, PHY rev:0x2
1479[ 1.284261] c1 1 mdss_dsi_ctrl_probe: DSI Ctrl name = MDSS DSI CTRL->1
1480[ 1.284704] c1 1 mdss_dsi_find_panel_of_node: cmdline:0:qcom,mdss_dsi_samsung_s6e3ha3_wqhd_cmd:1:qcom,mdss_dsi_samsung_s6e3ha3_wqhd_cmd:cfg:split_dsi panel_name:qcom,mdss_dsi_samsung_s6e3ha3_wqhd_cmd
1481[ 1.284725] c1 1 mdss_dsi_panel_init: Panel Name = M1 WQHD SAMSUNG S6E3HA3 5.5 command mode panel
1482[ 1.284820] c1 1 mdss_dsi_panel_timing_from_dt: found new timing "qcom,mdss_dsi_samsung_s6e3ha3_wqhd_cmd" (0000000000000000)
1483[ 1.284837] c1 1 mdss_dsi_parse_dcs_cmds: failed, key=qcom,mdss-dsi-post-panel-on-command
1484[ 1.284845] c1 1 mdss_dsi_parse_dcs_cmds: failed, key=qcom,mdss-dsi-timing-switch-command
1485[ 1.284913] c1 1 mdss_dsi_parse_panel_features: partial_update_enabled=0
1486[ 1.284923] c1 1 mdss_dsi_parse_panel_features: ulps feature disabled
1487[ 1.284930] mdss_dsi_parse_panel_features: ulps during suspend feature disabled
1488[ 1.284938] c1 1 mdss_dsi_parse_dms_config: dynamic switch feature enabled: 0
1489[ 1.284952] c1 1 mdss_dsi_parse_dcs_cmds: failed, key=qcom,mdss-dsi-panel-status-command
1490[ 1.285006] c1 1 mdss_dsi_parse_rgb_gain: PA[0] = 0x0
1491[ 1.285011] c1 1 mdss_dsi_parse_rgb_gain: PA[1] = 0x0
1492[ 1.285016] c1 1 mdss_dsi_parse_rgb_gain: PA[2] = 0x0
1493[ 1.285021] c1 1 mdss_dsi_parse_rgb_gain: PA[3] = 0x0
1494[ 1.285026] c1 1 mdss_dsi_parse_rgb_gain: R = 0x0, G = 0x0 B = 0x0
1495[ 1.285274] c1 1 mdss_dsi_parse_ctrl_params:3904 Unable to read qcom,display-id, data=0000000000000000,len=20
1496[ 1.285454] c1 1 mdss_dsi_parse_gpio_params: bklt_en gpio not specified
1497[ 1.285514] c1 1 msm_dss_get_res_byname: 'dsi_phy_regulator' resource not found
1498[ 1.285536] c1 1 mdss_dsi_retrieve_ctrl_resources+0xc4/0x228->msm_dss_ioremap_byname: 'dsi_phy_regulator' msm_dss_get_res_byname failed
1499[ 1.285544] c1 1 mdss_dsi_retrieve_ctrl_resources: ctrl_base=0000000000000000 ctrl_size=400 phy_base=0000000000000000 phy_size=558
1500[ 1.285572] c1 1 dsi_panel_device_register: Continuous splash enabled
1501[ 1.286308] c1 1 panel_debug_register_base: debugfs_create_file: data_type fail
1502[ 1.286918] c1 1 mdss_dsi_ctrl_probe: Dsi Ctrl->1 initialized, DSI rev:0x10040001, PHY rev:0x2
1503[ 1.288642] c1 1 mdss_dsi_status_init: DSI status check interval:3000
1504[ 1.289209] c1 1 msm8996-pinctrl 1010000.pinctrl: could not parse property pins
1505[ 1.289324] c1 1 hdmi_tx_get_dt_data:4349 Unable to read qcom,display-id, data=0000000000000000,len=0
1506[ 1.289390] c1 1 msm8996-pinctrl 1010000.pinctrl: could not parse property pins
1507[ 1.289397] c1 1 hdmi_tx_pinctrl_init: failed to get pinctrl
1508[ 1.289423] c1 1 hdmi_tx_init_resource: 'core_physical': start = 0x0000000000000000, len=0x50c
1509[ 1.289434] c1 1 hdmi_tx_init_resource: 'qfprom_physical': start = 0x0000000000000000, len=0x6158
1510[ 1.289534] c1 1 hdmi_tx_init_resource: 'hdcp_physical': start = 0x0000000000000000, len=0xfff
1511[ 1.290952] c1 1 mdss_register_panel: adding framebuffer device 9a0000.qcom,hdmi_tx
1512[ 1.294092] c1 1 mdss_register_panel: adding framebuffer device soc:qcom,mdss_wb_panel
1513[ 1.297667] c1 1 mdss_fb_probe: fb0: split_mode:2 left:720 right:720
1514[ 1.298583] c1 1 mdss_fb_register: FrameBuffer[0] 1440x2560 registered successfully!
1515[ 1.300295] c1 1 mdss_fb_probe: fb1: split_mode:0 left:0 right:0
1516[ 1.300476] c1 1 mdss_fb_register: FrameBuffer[1] 640x480 registered successfully!
1517[ 1.301017] c1 1 input: HDMI CEC User or Deck Control as /devices/virtual/input/input1
1518[ 1.306486] c1 1 mdss_fb_probe: fb2: split_mode:0 left:0 right:0
1519[ 1.306676] c1 1 mdss_fb_register: FrameBuffer[2] 640x480 registered successfully!
1520[ 1.306826] c1 1 mdss_mdp_splash_parse_dt: splash mem child node is not present
1521[ 1.310374] c1 1 scm_call failed: func id 0x42000c23, ret: -2, syscall returns: 0xfffffffffffffff0, 0x0, 0x0
1522[ 1.310408] c1 1 msm-dcc 4b3000.dcc: Falied to unlock DCC XPU.
1523[ 1.310452] c1 1 msm-dcc: probe of 4b3000.dcc failed with error -22
1524[ 1.336061] c1 1 In memshare_probe, Memshare probe success
1525[ 1.338698] c1 1 msm_rpmstats_probe: ERROR rpm_stats debugfs_create_file fail
1526[ 1.338738] c1 1 msm_rpm_stat: probe of 2a1fa0.qcom,rpm-stats failed with error -12
1527[ 1.346489] c1 1 l2cache-pmu soc:l2-pmu: Registered L2 cache PMU using 2 HW PMUs
1528[ 1.348227] c1 1 msm_rpm_log_probe: OK
1529[ 1.350519] c1 1 RPM Version: 148.0.5
1530[ 1.355803] c1 1 subsys-pil-tz ce0000.qcom,venus: for venus segments only will be dumped.
1531[ 1.357110] c1 1 subsys-pil-tz soc:qcom,kgsl-hyp: for a530_zap_signed segments only will be dumped.
1532[ 1.361428] c1 1 pil-q6v5-mss 2080000.qcom,mss: Failed to find the pas_id.
1533[ 1.366534] c1 1 uart_tx_gpio is not available
1534[ 1.366563] c1 1 uart_rx_gpio is not available
1535[ 1.366570] c1 1 uart_cts_gpio is not available
1536[ 1.366575] c1 1 uart_rfr_gpio is not available
1537[ 1.368158] c1 1 sps: BAM device 0x0000000000000000 is not registered yet.
1538[ 1.368323] sps:BAM 0x0000000000000000 is registered.
1539[ 1.370394] c1 1 7570000.uart: ttyHS0 at MMIO 0x7570000 (irq = 18, base_baud = 460800) is a MSM HS UART
1540[ 1.372920] c1 1 msm_serial_hs module loaded
1541[ 1.374165] c1 1 msm_serial_hsl_probe: serial console disabled, do not proceed msm_serial_hsl_probe().
1542[ 1.375501] c1 1 msm_serial_hsl_init: driver initialized
1543[ 1.395420] c1 1 kgsl: use zap firmware : a530_zap_signed
1544[ 1.438107] c1 1 brd: module loaded
1545[ 1.439691] c1 1 loop: module loaded
1546[ 1.439924] c1 1 zram: Created 1 device(s) ...
1547[ 1.441166] c1 1 QSEECOM: qseecom_probe: qseecom.qsee_version = 0x1000000
1548[ 1.441244] QSEECOM: qseecom_retrieve_ce_data: Device does not support PFE
1549[ 1.441254] c1 1 QSEECOM: qseecom_probe: no-clock-support=0x1[ 1.441264] c1 1 QSEECOM: qseecom_probe: qseecom.qsee_reentrancy_support = 2
1550[ 1.441841] c1 1 QSEECOM: qseecom_probe: qseecom.whitelist_support = 1
1551[ 1.447350] c1 1 fpc1020 soc:fp_fpc1020: found pin control fpc1020_reset_active
1552[ 1.447379] c1 1 fpc1020 soc:fp_fpc1020: found pin control fpc1020_reset_reset
1553[ 1.447388] c1 1 fpc1020 soc:fp_fpc1020: found pin control fpc1020_irq_active
1554[ 1.447423] c1 1 fpc1020 soc:fp_fpc1020: Selected 'fpc1020_reset_reset'
1555[ 1.447441] c1 1 fpc1020 soc:fp_fpc1020: Selected 'fpc1020_irq_active'
1556[ 1.447886] c1 1 fpc1020 soc:fp_fpc1020: fpc1020_probe: ok
1557[ 1.450427] c1 1 i2c-core: driver [tabla-i2c-core] using legacy suspend method
1558[ 1.450451] c1 1 i2c-core: driver [tabla-i2c-core] using legacy resume method
1559[ 1.450513] c1 1 i2c-core: driver [wcd9xxx-i2c-core] using legacy suspend method
1560[ 1.450519] c1 1 i2c-core: driver [wcd9xxx-i2c-core] using legacy resume method
1561[ 1.450578] c1 1 i2c-core: driver [tasha-i2c-core] using legacy suspend method
1562[ 1.450584] c1 1 i2c-core: driver [tasha-i2c-core] using legacy resume method
1563[ 1.453292] c1 1 [NFC] pn551_dev_init: Loading pn551 driver
1564[ 1.453569] c1 1 [NFC] pn551_probe:
1565[ 1.453698] c1 1 [NFC] pn551_probe : vreg_l6 regulator_get
1566[ 1.453724] c1 1 [NFC] pn551_probe : vreg_l6 regulator_set_voltage
1567[ 1.453735] c1 1 [NFC] pn551_probe : vreg_l6 regulator_enable
1568[ 1.453742] c1 1 [NFC] pn551_probe : vreg_l6 regulator_is_enabled = 1
1569[ 1.453749] c1 1 [NFC] pn551_parse_dt: Start
1570[ 1.453759] [NFC] pn551_parse_dt:ven_isinvert = 0
1571[ 1.453765] c1 1 [NFC] pn551_parse_dt: chk irq-gpio
1572[ 1.454179] c1 1 [NFC] pn551_parse_dt: chk ven-gpio
1573[ 1.454214] c1 1 [NFC] pn551_parse_dt: chk fwdl-gpio
1574[ 1.454249] c1 1 [NFC] pn551_parse_dt: chk nfc_i2c pins
1575[ 1.454303] c1 1 [NFC] pn551_parse_dt: End, irq_gpio:50, ven_gpio:12, firm_gpio:74
1576[ 1.454331] c1 1 [NFC] pn551_probe : irq_gpio:50, ven_gpio:12, firm_gpio:74, ven_enable:1
1577[ 1.454345] c1 1 [NFC] pn551_probe : irq_gpio set input 0
1578[ 1.454358] c1 1 [NFC] pn551_probe : ven_gpio set 0 0
1579[ 1.454369] c1 1 [NFC] pn551_probe : firm_gpio set 0 0
1580[ 1.454376] c1 1 [NFC] pn551_probe: init io_wake_lock
1581[ 1.454487] c1 1 [NFC] pn551_probe : requesting IRQ 405
1582[ 1.454646] c1 1 [NFC] pn551_probe: Turn off NFC VEN by default
1583[ 1.454654] c1 1 [NFC] pn551_Disable: gpio=12 set_value=0
1584[ 1.454667] c1 1 [NFC] pn551_Disable: [NFC] gpio=12 check ven_gpio value=0
1585[ 1.454673] c1 1 [NFC] pn551_probe: Probe success!
1586[ 1.454701] c1 1 i2c-core: driver [pn551] using legacy suspend method
1587[ 1.454707] c1 1 i2c-core: driver [pn551] using legacy resume method
1588[ 1.456267] c1 1 qce 660000.qcedev: Qualcomm Crypto 5.3.1 device found @0x660000
1589[ 1.456298] c1 1 qce 660000.qcedev: CE device = 0x0
1590[ 1.456298] c1 1 , IO base, CE = 0x0000000000000000
1591[ 1.456298] c1 1 , Consumer (IN) PIPE 2, Producer (OUT) PIPE 3
1592[ 1.456298] c1 1 IO base BAM = 0x0000000000000000
1593[ 1.456298] c1 1 BAM IRQ 247
1594[ 1.456298] c1 1 Engines Availability = 0x2011053
1595[ 1.456480] sps:BAM 0x0000000000000000 is registered.
1596[ 1.456934] c1 1 sps:BAM 0x0000000000000000 (va:0x0000000000000000) enabled: ver:0x27, number of pipes:16
1597[ 1.457273] c1 1 QCE50: qce_sps_init: Qualcomm MSM CE-BAM at 0x0000000000644000 irq 247
1598[ 1.463845] c1 1 qcrypto 660000.qcrypto: Qualcomm Crypto 5.3.1 device found @0x660000
1599[ 1.463877] c1 1 qcrypto 660000.qcrypto: CE device = 0x0
1600[ 1.463877] c1 1 , IO base, CE = 0x0000000000000000
1601[ 1.463877] c1 1 , Consumer (IN) PIPE 4, Producer (OUT) PIPE 5
1602[ 1.463877] c1 1 IO base BAM = 0x0000000000000000
1603[ 1.463877] c1 1 BAM IRQ 247
1604[ 1.463877] c1 1 Engines Availability = 0x2011053
1605[ 1.464331] c1 1 QCE50: qce_sps_init: Qualcomm MSM CE-BAM at 0x0000000000644000 irq 247
1606[ 1.468095] c1 1 qcrypto 660000.qcrypto: qcrypto-ecb-aes
1607[ 1.468285] c1 1 qcrypto 660000.qcrypto: qcrypto-cbc-aes
1608[ 1.468443] c1 1 qcrypto 660000.qcrypto: qcrypto-ctr-aes
1609[ 1.468533] c1 1 qcrypto 660000.qcrypto: qcrypto-ecb-des
1610[ 1.468621] c1 1 qcrypto 660000.qcrypto: qcrypto-cbc-des
1611[ 1.468709] c1 1 qcrypto 660000.qcrypto: qcrypto-ecb-3des
1612[ 1.468795] c1 1 qcrypto 660000.qcrypto: qcrypto-cbc-3des
1613[ 1.468882] c1 1 qcrypto 660000.qcrypto: qcrypto-xts-aes
1614[ 1.468983] c1 1 qcrypto 660000.qcrypto: qcrypto-sha1
1615[ 1.469076] c1 1 qcrypto 660000.qcrypto: qcrypto-sha256
1616[ 1.469163] c1 1 qcrypto 660000.qcrypto: qcrypto-aead-hmac-sha1-cbc-aes
1617[ 1.469250] c1 1 qcrypto 660000.qcrypto: qcrypto-aead-hmac-sha1-cbc-des
1618[ 1.469338] c1 1 qcrypto 660000.qcrypto: qcrypto-aead-hmac-sha1-cbc-3des
1619[ 1.469433] c1 1 qcrypto 660000.qcrypto: qcrypto-aead-hmac-sha256-cbc-aes
1620[ 1.469521] c1 1 qcrypto 660000.qcrypto: qcrypto-aead-hmac-sha256-cbc-des
1621[ 1.469618] c1 1 qcrypto 660000.qcrypto: qcrypto-aead-hmac-sha256-cbc-3des
1622[ 1.469710] c1 1 qcrypto 660000.qcrypto: qcrypto-hmac-sha1
1623[ 1.469811] c1 1 qcrypto 660000.qcrypto: qcrypto-hmac-sha256
1624[ 1.469910] c1 1 qcrypto 660000.qcrypto: qcrypto-aes-ccm
1625[ 1.470005] c1 1 qcrypto 660000.qcrypto: qcrypto-rfc4309-aes-ccm
1626[ 1.473966] c1 1 ICE IRQ = 30
1627[ 1.474180] c1 1 qcom_ice_get_device_tree_data: No vdd-hba-supply regulator, assuming not needed
1628[ 1.474246] c1 1 ICE IRQ = 31
1629[ 1.481580] c1 1 qcom_ice_get_pdevice: found ice device 0000000000000000
1630[ 1.481603] c1 1 qcom_ice_get_pdevice: matching platform device 0000000000000000
1631[ 1.482255] c1 1 scm_call failed: func id 0x42000c02, ret: -2, syscall returns: 0xfffffffffffffffc, 0x0, 0x0
1632[ 1.483053] c1 1 ufs_qcom_phy_qmp_14nm 627000.ufsphy: failed to get tx_iface_clk err -2
1633[ 1.483066] c1 1 ufs_qcom_phy_qmp_14nm 627000.ufsphy: failed to get rx_iface_clk err -2
1634[ 1.484590] c1 1 scsi host0: ufshcd
1635[ 1.488573] c1 1 qcom_ice 630000.ufsice: QC ICE 2.1.44 device found @0x0000000000000000
1636[ 1.498633] c1 1 msm8996-pinctrl 1010000.pinctrl: could not parse property pins
1637[ 1.502042] c1 1 spi_master spi6: will run message pump with realtime priority
1638[ 1.507418] c1 1 sps:BAM 0x0000000000000000 (va:0x0000000000000000) enabled: ver:0x19, number of pipes:24
1639[ 1.508276] c1 1 Ethernet Channel Bonding Driver: v3.7.1 (April 27, 2011)
1640[ 1.509729] c1 1 tun: Universal TUN/TAP device driver, 1.6
1641[ 1.509745] c1 1 tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
1642[ 1.509821] c1 1 PPP generic driver version 2.4.2
1643[ 1.509902] c1 1 PPP BSD Compression module registered
1644[ 1.509911] c1 1 PPP Deflate Compression module registered
1645[ 1.509952] c1 1 PPP MPPE Compression module registered
1646[ 1.509965] c1 1 NET: Registered protocol family 24
1647[ 1.512886] c0 52 ufshcd 624000.ufshc: ufshcd_print_pwr_info:[RX, TX]: gear=[1, 1], lane[1, 1], pwr[SLOWAUTO_MODE, SLOWAUTO_MODE], rate = 0
1648[ 1.543404] c1 1 msm_pcie_enable: PCIe: Assert the reset of endpoint of RC0.
1649[ 1.547373] c1 1 msm_pcie_enable: PCIe RC0 PHY is ready!
1650[ 1.557498] c1 1 msm_pcie_enable: PCIe: Release the reset of endpoint of RC0.
1651[ 1.599522] c1 1 msm_pcie_enable: PCIe RC0 link initialized
1652[ 1.599638] c1 1 PCI host bridge /soc/qcom,pcie@00600000 ranges:
1653[ 1.599660] c1 1 No bus range found for /soc/qcom,pcie@00600000, using [bus 00-ff]
1654[ 1.599686] c1 1 IO 0x0c200000..0x0c2fffff -> 0x0c200000
1655[ 1.599698] c1 1 MEM 0x0c300000..0x0cffffff -> 0x0c300000
1656[ 1.609897] c1 1 pci-msm 600000.qcom,pcie: PCI host bridge to bus 0000:00
1657[ 1.609910] c1 1 pci_bus 0000:00: root bus resource [bus 00-ff]
1658[ 1.609919] c1 1 pci_bus 0000:00: root bus resource [io 0x0000-0xfffff] (bus address [0xc200000-0xc2fffff])
1659[ 1.609926] c1 1 pci_bus 0000:00: root bus resource [mem 0x00000000-0x00cfffff]
1660[ 1.610145] c1 1 msm_pcie_oper_conf: Read of RC0 0:0x00 + 0x0014[4] is all FFs
1661[ 1.610219] c1 1 pci 0000:00:00.0: IOMMU is currently not supported for PCI
1662[ 1.610353] c1 1 pci 0000:00:00.0: of_irq_parse_pci() failed with rc=-19
1663[ 1.610581] c1 1 pci 0000:00:00.0: bridge configuration invalid ([bus 00-00]), reconfiguring
1664[ 1.610955] c1 1 msm_pcie_oper_conf: Read of RC0 1:0x00 + 0x0014[4] is all FFs
1665[ 1.611124] c1 1 pci 0000:01:00.0: IOMMU is currently not supported for PCI
1666[ 1.611989] c1 1 msm_pcie_oper_conf: Read of RC0 0:0x00 + 0x0028[4] is all FFs
1667[ 1.612022] c1 1 pci 0000:00:00.0: BAR 8: assigned [mem 0x00000000-0x001fffff]
1668[ 1.612031] c1 1 pci 0000:00:00.0: BAR 0: assigned [mem 0x00000000-0x00000fff 64bit]
1669[ 1.612080] c1 1 pci 0000:01:00.0: BAR 0: assigned [mem 0x00000000-0x001fffff 64bit]
1670[ 1.612303] c1 1 pci 0000:00:00.0: PCI bridge to [bus 00]
1671[ 1.612339] c1 1 pci 0000:00:00.0: bridge window [mem 0x00000000-0x001fffff]
1672[ 1.614031] c1 1 cnss soc:qcom,cnss: for AR6320 segments only will be dumped.
1673[ 1.626094] c1 1 msm_pcie_disable: PCIe: Assert the reset of endpoint of RC0.
1674[ 1.628815] c1 1 cnss: Platform driver probed successfully.
1675[ 1.630253] c1 1 CLD80211: Initializing
1676[ 1.630446] c1 1 usbcore: registered new interface driver rtl8150
1677[ 1.630478] c1 1 usbcore: registered new interface driver r8152
1678[ 1.630518] c1 1 usbcore: registered new interface driver asix
1679[ 1.630546] c1 1 usbcore: registered new interface driver ax88179_178a
1680[ 1.630575] c1 1 usbcore: registered new interface driver cdc_ether
1681[ 1.630983] c1 1 usbcore: registered new interface driver cdc_ncm
1682[ 1.631685] c1 104 msm_sharedmem: sharedmem_register_qmi: qmi init successful
1683[ 1.635874] c1 1 msm_sharedmem: msm_sharedmem_probe: Device created for client 'rmtfs'
1684[ 1.638866] c1 1 rtel: rtel_probe: Device created for client 'rtel'
1685[ 1.649052] c1 1 msm-dwc3 6a00000.ssusb: unable to get dbm device
1686[ 1.654765] c1 1 usbcore: registered new interface driver usb-storage
1687[ 1.654900] c1 1 usbcore: registered new interface driver usbserial
1688[ 1.654933] c1 1 usbcore: registered new interface driver usb_ehset_test
1689[ 1.659221] c1 1 gbridge_init: gbridge_init successs.
1690[ 1.662485] c1 1 9-0022 supply vbus not found, using dummy regulator
1691[ 1.664027] c1 1 i2c-msm-v2 75b7000.i2c: msm_bus_scale_register_client(mstr-id:84):0x13 (ok)
1692[ 1.667242] c1 1 [BATT][PD] Charger driver is not ready!
1693[ 1.667937] c1 1 mousedev: PS/2 mouse device common for all mice
1694[ 1.668277] c1 1 usbcore: registered new interface driver xpad
1695[ 1.669043] c0 58 [BATT][PD] Charger driver is not ready!
1696[ 1.671103] c1 1 [TP]: parse_config
1697[ 1.704360] c0 52 ufshcd 624000.ufshc: ufshcd_print_pwr_info:[RX, TX]: gear=[3, 3], lane[1, 1], pwr[FAST MODE, FAST MODE], rate = 2
1698[ 1.705071] c1 1 i2c-msm-v2 7577000.i2c: msm_bus_scale_register_client(mstr-id:86):0x14 (ok)
1699[ 1.705076] c0 52 scsi 0:0:0:49488: Well-known LUN SAMSUNG KLUBG4G1CE-B0B1 0800 PQ: 0 ANSI: 6
1700[ 1.705568] c1 1 [TP]:check_chip_exist: Synaptics chip exist
1701[ 1.706291] c0 52 scsi 0:0:0:49456: Well-known LUN SAMSUNG KLUBG4G1CE-B0B1 0800 PQ: 0 ANSI: 6
1702[ 1.707438] c0 52 scsi 0:0:0:49476: Well-known LUN SAMSUNG KLUBG4G1CE-B0B1 0800 PQ: 0 ANSI: 6
1703[ 1.708879] c1 59 scsi 0:0:0:0: Direct-Access SAMSUNG KLUBG4G1CE-B0B1 0800 PQ: 0 ANSI: 6
1704[ 1.709702] c1 59 scsi 0:0:0:1: Direct-Access SAMSUNG KLUBG4G1CE-B0B1 0800 PQ: 0 ANSI: 6
1705[ 1.710473] c1 59 scsi 0:0:0:2: Direct-Access SAMSUNG KLUBG4G1CE-B0B1 0800 PQ: 0 ANSI: 6
1706[ 1.711080] c1 59 scsi 0:0:0:3: Direct-Access SAMSUNG KLUBG4G1CE-B0B1 0800 PQ: 0 ANSI: 6
1707[ 1.711607] c1 59 scsi 0:0:0:4: Direct-Access SAMSUNG KLUBG4G1CE-B0B1 0800 PQ: 0 ANSI: 6
1708[ 1.712123] c1 59 scsi 0:0:0:5: Direct-Access SAMSUNG KLUBG4G1CE-B0B1 0800 PQ: 0 ANSI: 6
1709[ 1.714763] c1 58 sd 0:0:0:1: [sdb] 16384-byte physical blocks
1710[ 1.714814] c1 59 sd 0:0:0:0: [sda] 16384-byte physical blocks
1711[ 1.718537] c1 58 sdb: sdb1
1712[ 1.718633] c0 52 sd 0:0:0:2: [sdc] 16384-byte physical blocks
1713[ 1.719555] c1 59 sda: sda1 sda2 sda3 sda4 sda5 sda6 sda7 sda8 sda9 sda10 sda11 sda12 sda13 sda14 sda15 sda16 sda17 sda18 sda19 sda20 sda21 sda22 sda23 sda24 sda25 sda26 sda27 sda28 sda29 sda30 sda31 sda32 sda33 sda34 sda35 sda36
1714[ 1.722594] c0 280 sd 0:0:0:3: [sdd] 16384-byte physical blocks
1715[ 1.722758] c1 1 [TP]:synaptics_rmi4_f12_init: Function 12 max x = 1439 max y = 2559 Rx: 17 Tx: 30
1716[ 1.723135] c0 52 sdc: sdc1
1717[ 1.723528] c1 1 [TP]synaptics_rmi4_f12_init:Wakeup Gesture range (0,0) -> (1439,2559)
1718[ 1.723887] c1 1 [TP]:synaptics_rmi4_f12_init report data init done
1719[ 1.724233] c1 58 sd 0:0:0:4: [sde] 16384-byte physical blocks
1720[ 1.726380] c0 281 sd 0:0:0:5: [sdf] 16384-byte physical blocks
1721[ 1.729680] c2 280 sdd: sdd1 sdd2 sdd3 sdd4 sdd5 sdd6 sdd7 sdd8 sdd9 sdd10 sdd11 sdd12 sdd13
1722[ 1.730336] c1 58 sde: sde1 sde2 sde3 sde4 sde5 sde6
1723[ 1.733216] c1 1 [TP]:synaptics_rmi4_query_device: chip_id:3708, firmware_id:2433782
1724[ 1.733589] c2 281 sdf: sdf1 sdf2 sdf3 sdf4 sdf5
1725[ 1.734215] c1 1 [TP]:synaptics_rmi4_query_device: config_version: 4d31763200180000000000000000000000000000000000000000000000000000
1726[ 1.734777] c1 1 input: synaptics_dsxv26 as /devices/soc/7577000.i2c/i2c-3/3-0020/input/input2
1727[ 1.735327] c1 1 [TP]: [ERR]:synaptics_rmi4_irq_enable: Interrupt already enabled
1728[ 1.736951] c1 1 [LASER] stmvl53l0_init: Enter
1729[ 1.736972] c1 1 [LASER] stmvl53l0_init_i2c: Enter
1730[ 1.738066] c1 1 [LASER] stmvl53l0_probe: Enter++
1731[ 1.738243] c1 1 [LASER] Laser_parse_dt: pwdn_gpio = 94
1732[ 1.738408] c1 1 [LASER] Laser_parse_dt: laser_irq_gpio = 62
1733[ 1.738434] c1 1 [LASER] Laser_parse_dt: Laser_parse_dt: sensor cali_size = 768
1734[ 1.738441] c1 1 [LASER] Laser_parse_dt: gyro sensor cali_data[100] = 67
1735[ 1.738448] c1 1 [LASER] Laser_parse_dt: gyro sensor cali_data[101] = 00
1736[ 1.738453] c1 1 [LASER] Laser_parse_dt: gyro sensor cali_data[102] = 05
1737[ 1.738458] c1 1 [LASER] Laser_parse_dt: gyro sensor cali_data[103] = 17
1738[ 1.738464] c1 1 [LASER] Laser_parse_dt: gyro sensor cali_data[104] = 67
1739[ 1.738469] c1 1 [LASER] Laser_parse_dt: gyro sensor cali_data[105] = 00
1740[ 1.738474] c1 1 [LASER] Laser_parse_dt: gyro sensor cali_data[106] = 03
1741[ 1.738479] c1 1 [LASER] Laser_parse_dt: gyro sensor cali_data[107] = 00
1742[ 1.738484] c1 1 [LASER] Laser_parse_dt: Laser_parse_dt: Update offset_kvalue = 23
1743[ 1.738490] c1 1 [LASER] Laser_parse_dt: Laser_parse_dt: Update xtalk_kvalue = 0x3
1744[ 1.738495] c1 1 [LASER] Laser_parse_dt: Update SpadCount = 5 and IsAperture = 0
1745[ 1.738501] c1 1 [LASER] stmvl53l0_parse_vdd: Enter++
1746[ 1.738568] c1 1 12-0029 supply vdd not found, using dummy regulator
1747[ 1.738629] c1 1 [LASER] stmvl53l0_parse_vdd: End--
1748[ 1.738636] c1 1 [LASER] Laser_pinctrl_init: Enter++
1749[ 1.739190] c1 1 [LASER] Laser_pinctrl_init: End--
1750[ 1.739202] c1 1 [LASER] stmvl53l0_setup: Enter++
1751[ 1.739229] c1 1 [LASER] stmvl53l0_setup: register_irq: 417
1752[ 1.739639] c1 1 [LASER] stmvl53l0_setup: interrupt is hooked
1753[ 1.739814] c1 1 input: STM VL53L0 proximity sensor as /devices/virtual/input/input3
1754[ 1.739892] c1 1 [LASER] stmvl53l0_setup: Misc device registration name:12-0029
1755[ 1.740701] c1 1 i2c-msm-v2 75ba000.i2c: msm_bus_scale_register_client(mstr-id:84):0x15 (ok)
1756[ 1.741085] [LASER] stmvl53l0_setupAPIFunctions: read REVISION_ID: 0x10
1757 API_VERSION: 1.1.20.2
1758[ 1.741095] c1 1 [LASER] stmvl53l0_setupAPIFunctions: to setup API cut 1.1
1759[ 1.741107] c1 1 [LASER] stmvl53l0_init_client: Enter
1760[ 1.741114] c1 1 [LASER] stmvl53l0_init_client: Call of VL53L0_DataInit
1761[ 1.747803] c1 1 [LASER] stmvl53l0_init_client: Call of VL53L0_StaticInit
1762[ 1.805102] c1 1 [LASER] stmvl53l0_init_client: Perform and set VhvSettings = 31 and PhaseCal = 1
1763[ 1.806258] c1 1 [LASER] stmvl53l0_init_client: Set refSpadCount = 5 and isApertureSpads = 0
1764[ 1.806409] c1 1 [LASER] stmvl53l0_init_client: Set offset = 23
1765[ 1.806715] c1 1 [LASER] stmvl53l0_init_client: Set xtalk = 0x3
1766[ 1.806723] c1 1 [LASER] stmvl53l0_init_client: Set RIT - 68
1767[ 1.806729] c1 1 [LASER] stmvl53l0_init_client: Call of VL53L0_SetDeviceMode
1768[ 1.807045] c1 1 [LASER] stmvl53l0_init_client: End
1769[ 1.807053] c1 1 [LASER] stmvl53l0_setup: support ver. 1.1.20.2(1.0.5.1) enabled
1770[ 1.807060] [LASER] stmvl53l0_setup: End--
1771[ 1.807065] c1 1 [LASER] stmvl53l0_probe: Success--
1772[ 1.807155] c1 1 [LASER] stmvl53l0_init_i2c: End with rc:0
1773[ 1.807163] c1 1 [LASER] stmvl53l0_init: End
1774[ 1.809115] c1 1 qcom,qpnp-rtc qpnp-rtc-8: rtc core: registered qpnp_rtc as rtc0
1775[ 1.809385] c1 1 i2c /dev entries driver
1776[ 1.809662] c1 1 [AUD] tfa9888: tfa9888_init
1777[ 1.809716] c1 1 i2c-core: driver [tfa9888] using legacy suspend method
1778[ 1.809723] c1 1 i2c-core: driver [tfa9888] using legacy resume method
1779[ 1.851042] c1 1 vmem: Up and running with 4 banks of memory from [bus size 3f074d43c9 64bit pref disabled]
1780[ 1.878473] c2 1 msm_camera_pinctrl_init:1185 Getting pinctrl handle failed
1781[ 1.878497] c2 1 msm_actuator_platform_probe:1934 ERR:msm_actuator_platform_probe: Error in reading actuator pinctrl
1782[ 1.878618] c2 1 qcom,actuator: probe of a0c000.qcom,cci:qcom,actuator@0 failed with error -22
1783[ 1.880520] c2 1 msm_eeprom_platform_probe failed 1673
1784[ 1.881091] c2 1 msm_eeprom_platform_probe failed 1673
1785[ 1.882777] c2 1 msm_camera_pinctrl_init:1185 Getting pinctrl handle failed
1786[ 1.882793] c2 1 msm_ois_platform_probe:739 ERR:msm_ois_platform_probe: Error in reading OIS pinctrl
1787[ 1.882889] c2 1 qcom,ois: probe of a0c000.qcom,cci:qcom,ois@0 failed with error -22
1788[ 1.887052] c2 1 msm8996-pinctrl 1010000.pinctrl: could not parse property pins
1789[ 1.892616] c2 1 MSM-CPP cpp_init_hardware:863 CPP HW Version: 0x60000000
1790[ 1.892638] c2 1 MSM-CPP cpp_init_hardware:881 stream_cnt:0
1791[ 1.905585] __msm_jpeg_init:1537] Jpeg Device id 0
1792[ 1.906642] c2 1 __msm_jpeg_init:1537] Jpeg Device id 2__msm_jpeg_init:1537] Jpeg Device id 3
1793[ 1.911809] c2 1 msm_fd_hw_set_dt_parms_by_name: Error property does not exist
1794[ 2.010110] c2 1 msm_fd aa4000.qcom,fd: Face detection halt timeout
1795[ 2.011985] c2 1 i2c-msm-v2 75b5000.i2c: msm_bus_scale_register_client(mstr-id:84):0x1e (ok)
1796[ 2.012353] c2 1 SMB1351 smb1351_parallel_slave_probe: smb1351 parallel successfully probed.
1797[ 2.014642] c2 1 htc_battery_init: can't find compatible 'htc,htc_battery_store'
1798[ 2.016529] c0 283 FG: fg_probe: FG Probe success - FG Revision DIG:3.1 ANA:1.2 PMIC subtype=19
1799[ 2.018460] c0 4 FG: update_irq_volt_empty: voltage = 3050, converted_raw = 0038
1800[ 2.020363] c2 1 [BATT] Probe process: (2, 1)
1801[ 2.020379] [BATT] htc_battery_fb_register in
1802[ 2.020393] c2 1 [BATT] htc_battery_init done.
1803[ 2.021302] c2 1 set restart reason = 0x776655AA
1804[ 2.021313] c2 1 set restart msg = 'Unknown'
1805[ 2.023150] c2 1 unable to find DT imem DLOAD mode node
1806[ 2.025131] c2 1 unable to find DT imem EDLOAD mode node
1807[ 2.057857] c2 1 device-mapper: uevent: version 1.0.3
1808[ 2.058013] c2 1 device-mapper: ioctl: 4.28.0-ioctl (2014-09-17) initialised: dm-devel@redhat.com
1809[ 2.058144] c2 1 device-mapper: req-crypt: dm-req-crypt successfully initalized.
1810[ 2.058144] c2 1
1811[ 2.059737] c2 1 bt_power bt_qca6174: no qca,bt-vdd-core-voltage-level property
1812[ 2.059873] c2 1 bt_power bt_qca6174: no qca,bt-vdd-pa-voltage-level property
1813[ 2.059881] c2 1 bt_dt_parse_vreg_info: qca,bt-vdd-ldo: is not provided in device tree
1814[ 2.059886] c2 1 bt_dt_parse_vreg_info: qca,bt-chip-pwd: is not provided in device tree
1815[ 2.060502] c2 1 ------------[ cut here ]------------
1816[ 2.060520] c2 1 WARNING: CPU: 2 PID: 1 at fs/sysfs/dir.c:31 sysfs_warn_dup+0x64/0x84()
1817[ 2.060525] c2 1 sysfs: cannot create duplicate filename '/devices/system/cpu/cpu0/cpufreq/stats'
1818[ 2.060531] Modules linked in:
1819[ 2.060547] c2 1 CPU: 2 PID: 1 Comm: swapper/0 Tainted: G W 3.18.52-g06de206-dirty #1
1820[ 2.060552] c2 1 Hardware name: HTC Corporation. MSM8996pro v1.1 + PMI8996 Marlin A (DT)
1821[ 2.060559] c2 1 Call trace:
1822[ 2.060574] c2 1 [<ffffffc00008c3b4>] dump_backtrace+0x0/0x13c
1823[ 2.060579] c2 1 [<ffffffc00008c7a0>] show_stack+0x14/0x1c
1824[ 2.060590] c2 1 [<ffffffc000fd3348>] dump_stack+0x88/0xac
1825[ 2.060598] c2 1 [<ffffffc0000ab2ec>] warn_slowpath_fmt+0xc8/0x100
1826[ 2.060603] c2 1 [<ffffffc0002617c0>] sysfs_warn_dup+0x64/0x84
1827[ 2.060608] c2 1 [<ffffffc0002621f8>] internal_create_group+0x218/0x230
1828[ 2.060613] c2 1 [<ffffffc000262224>] sysfs_create_group+0x14/0x1c
1829[ 2.060628] c2 1 [<ffffffc000919a54>] __cpufreq_stats_create_table.part.7+0x6c/0x1d4
1830[ 2.060633] c2 1 [<ffffffc0017a2f24>] cpufreq_stats_init+0x188/0x330
1831[ 2.060639] c2 1 [<ffffffc000082a50>] do_one_initcall+0x98/0x1cc
1832[ 2.060651] c2 1 [<ffffffc001762c58>] kernel_init_freeable+0x1dc/0x290
1833[ 2.060665] c2 1 [<ffffffc000fcd5bc>] kernel_init+0x18/0x134
1834[ 2.060671] c2 1 ---[ end trace bd3b6ef059461165 ]---
1835[ 2.060700] c2 1 ------------[ cut here ]------------
1836[ 2.060706] c2 1 WARNING: CPU: 2 PID: 1 at fs/sysfs/dir.c:31 sysfs_warn_dup+0x64/0x84()
1837[ 2.060711] c2 1 sysfs: cannot create duplicate filename '/devices/system/cpu/cpu2/cpufreq/stats'
1838[ 2.060715] Modules linked in:
1839[ 2.060722] c2 1 CPU: 2 PID: 1 Comm: swapper/0 Tainted: G W 3.18.52-g06de206-dirty #1
1840[ 2.060727] c2 1 Hardware name: HTC Corporation. MSM8996pro v1.1 + PMI8996 Marlin A (DT)
1841[ 2.060731] c2 1 Call trace:
1842[ 2.060736] c2 1 [<ffffffc00008c3b4>] dump_backtrace+0x0/0x13c
1843[ 2.060742] c2 1 [<ffffffc00008c7a0>] show_stack+0x14/0x1c
1844[ 2.060746] c2 1 [<ffffffc000fd3348>] dump_stack+0x88/0xac
1845[ 2.060751] c2 1 [<ffffffc0000ab2ec>] warn_slowpath_fmt+0xc8/0x100
1846[ 2.060756] c2 1 [<ffffffc0002617c0>] sysfs_warn_dup+0x64/0x84
1847[ 2.060761] c2 1 [<ffffffc0002621f8>] internal_create_group+0x218/0x230
1848[ 2.060766] c2 1 [<ffffffc000262224>] sysfs_create_group+0x14/0x1c
1849[ 2.060772] c2 1 [<ffffffc000919a54>] __cpufreq_stats_create_table.part.7+0x6c/0x1d4
1850[ 2.060777] c2 1 [<ffffffc0017a2f24>] cpufreq_stats_init+0x188/0x330
1851[ 2.060782] c2 1 [<ffffffc000082a50>] do_one_initcall+0x98/0x1cc
1852[ 2.060788] c2 1 [<ffffffc001762c58>] kernel_init_freeable+0x1dc/0x290
1853[ 2.060793] c2 1 [<ffffffc000fcd5bc>] kernel_init+0x18/0x134
1854[ 2.060798] c2 1 ---[ end trace bd3b6ef059461166 ]---
1855[ 2.065040] c2 1 hidraw: raw HID events driver (C) Jiri Kosina
1856[ 2.065392] c2 1 usbcore: registered new interface driver usbhid
1857[ 2.065398] c2 1 usbhid: USB HID core driver
1858[ 2.065935] c2 1 ashmem: initialized
1859[ 2.243383] c0 283 [TP]:fwu_start_reflash: Start of reflash process
1860[ 2.768874] c2 1 nanohub: loaded; ret=0
1861[ 2.769016] c2 1 qpnp_coincell_charger_show_state: enabled=Y, voltage=3200 mV, resistance=2100 ohm
1862[ 2.773888] c2 1 bimc-bwmon 408000.qcom,cpu-bwmon: BW HWmon governor registered.
1863[ 2.775229] c2 1 arm-memlat-mon soc:qcom,arm-memlat-mon-0: Memory Latency governor registered.
1864[ 2.775269] c2 1 arm-memlat-mon soc:qcom,arm-memlat-mon-2: Memory Latency governor registered.
1865[ 2.777829] c2 1 m4m-hwmon 6530000.qcom,m4m-hwmon: Cache HWmon governor registered.
1866[ 2.781962] c2 1 devfreq soc:qcom,cpubw: Couldn't update frequency transition information.
1867[ 2.782079] c2 1 devfreq soc:qcom,mincpubw: Couldn't update frequency transition information.
1868[ 2.782186] c2 1 devfreq soc:qcom,memlat-cpu0: Couldn't update frequency transition information.
1869[ 2.782284] c2 1 devfreq soc:qcom,memlat-cpu2: Couldn't update frequency transition information.
1870[ 2.787394] c2 1 [NC] == NC_probe ==
1871[ 2.787405] c2 1 [NC] Init GPIO pins
1872[ 2.787660] c2 1 usbcore: registered new interface driver snd-usb-audio
1873[ 2.788943] c2 1 tfa98xx_i2c_init(): TFA98XX driver version 2.10.1-a
1874[ 2.788981] c2 1 tfa98xx_i2c_probe(): tfa98xx_i2c_probe
1875[ 2.789357] c2 1 tfa98xx_i2c_probe(): TFA9891 detected
1876[ 2.789371] c2 1 tfa98xx 7-0034: Skipping IRQ registration
1877[ 2.789458] c2 1 tfa98xx_i2c_probe(): tfa98xx_i2c_probe Probe completed successfully!
1878[ 2.790302] c2 1 msm8996-pinctrl 1010000.pinctrl: could not parse property pins
1879[ 2.790373] c2 1 msm8996-pinctrl 1010000.pinctrl: could not parse property pins
1880[ 2.800550] c2 1 msm-dai-tdm soc:qcom,msm-dai-tdm-tert-rx: msm_dai_tdm_q6_probe: dev_name: soc:qcom,msm-dai-tdm-tert-rx group_id: 0x9120
1881[ 2.800800] c2 1 msm-dai-q6-tdm soc:qcom,msm-dai-tdm-tert-rx:qcom,msm-dai-q6-tdm-tert-rx-0: msm_dai_q6_tdm_dev_probe: dev_name: soc:qcom,msm-dai-tdm-tert-rx:qcom,msm-dai-q6-tdm-tert-rx-0 dev_id: 0x9020
1882[ 2.800808] c2 1 msm-dai-q6-tdm soc:qcom,msm-dai-tdm-tert-rx:qcom,msm-dai-q6-tdm-tert-rx-0: msm_dai_q6_tdm_dev_probe: Custom tdm header not supported
1883[ 2.800949] c2 1 msm-dai-q6-tdm soc:qcom,msm-dai-tdm-tert-rx:qcom,msm-dai-q6-tdm-tert-rx-1: msm_dai_q6_tdm_dev_probe: dev_name: soc:qcom,msm-dai-tdm-tert-rx:qcom,msm-dai-q6-tdm-tert-rx-1 dev_id: 0x9022
1884[ 2.800956] c2 1 msm-dai-q6-tdm soc:qcom,msm-dai-tdm-tert-rx:qcom,msm-dai-q6-tdm-tert-rx-1: msm_dai_q6_tdm_dev_probe: Custom tdm header not supported
1885[ 2.801089] c2 1 msm-dai-q6-tdm soc:qcom,msm-dai-tdm-tert-rx:qcom,msm-dai-q6-tdm-tert-rx-2: msm_dai_q6_tdm_dev_probe: dev_name: soc:qcom,msm-dai-tdm-tert-rx:qcom,msm-dai-q6-tdm-tert-rx-2 dev_id: 0x9024
1886[ 2.801097] c2 1 msm-dai-q6-tdm soc:qcom,msm-dai-tdm-tert-rx:qcom,msm-dai-q6-tdm-tert-rx-2: msm_dai_q6_tdm_dev_probe: Custom tdm header not supported
1887[ 2.801228] c2 1 msm-dai-q6-tdm soc:qcom,msm-dai-tdm-tert-rx:qcom,msm-dai-q6-tdm-tert-rx-3: msm_dai_q6_tdm_dev_probe: dev_name: soc:qcom,msm-dai-tdm-tert-rx:qcom,msm-dai-q6-tdm-tert-rx-3 dev_id: 0x9026
1888[ 2.801236] c2 1 msm-dai-q6-tdm soc:qcom,msm-dai-tdm-tert-rx:qcom,msm-dai-q6-tdm-tert-rx-3: msm_dai_q6_tdm_dev_probe: Custom tdm header not supported
1889[ 2.801255] c2 1 msm-dai-tdm soc:qcom,msm-dai-tdm-tert-tx: msm_dai_tdm_q6_probe: dev_name: soc:qcom,msm-dai-tdm-tert-tx group_id: 0x9121
1890[ 2.801388] c2 1 msm-dai-q6-tdm soc:qcom,msm-dai-tdm-tert-tx:qcom,msm-dai-q6-tdm-tert-tx-0: msm_dai_q6_tdm_dev_probe: dev_name: soc:qcom,msm-dai-tdm-tert-tx:qcom,msm-dai-q6-tdm-tert-tx-0 dev_id: 0x9021
1891[ 2.801395] c2 1 msm-dai-q6-tdm soc:qcom,msm-dai-tdm-tert-tx:qcom,msm-dai-q6-tdm-tert-tx-0: msm_dai_q6_tdm_dev_probe: Custom tdm header not supported
1892[ 2.801525] c2 1 msm-dai-q6-tdm soc:qcom,msm-dai-tdm-tert-tx:qcom,msm-dai-q6-tdm-tert-tx-1: msm_dai_q6_tdm_dev_probe: dev_name: soc:qcom,msm-dai-tdm-tert-tx:qcom,msm-dai-q6-tdm-tert-tx-1 dev_id: 0x9023
1893[ 2.801533] c2 1 msm-dai-q6-tdm soc:qcom,msm-dai-tdm-tert-tx:qcom,msm-dai-q6-tdm-tert-tx-1: msm_dai_q6_tdm_dev_probe: Custom tdm header not supported
1894[ 2.801662] c2 1 msm-dai-q6-tdm soc:qcom,msm-dai-tdm-tert-tx:qcom,msm-dai-q6-tdm-tert-tx-2: msm_dai_q6_tdm_dev_probe: dev_name: soc:qcom,msm-dai-tdm-tert-tx:qcom,msm-dai-q6-tdm-tert-tx-2 dev_id: 0x9025
1895[ 2.801669] c2 1 msm-dai-q6-tdm soc:qcom,msm-dai-tdm-tert-tx:qcom,msm-dai-q6-tdm-tert-tx-2: msm_dai_q6_tdm_dev_probe: Custom tdm header not supported
1896[ 2.801799] c2 1 msm-dai-q6-tdm soc:qcom,msm-dai-tdm-tert-tx:qcom,msm-dai-q6-tdm-tert-tx-3: msm_dai_q6_tdm_dev_probe: dev_name: soc:qcom,msm-dai-tdm-tert-tx:qcom,msm-dai-q6-tdm-tert-tx-3 dev_id: 0x9027
1897[ 2.801806] c2 1 msm-dai-q6-tdm soc:qcom,msm-dai-tdm-tert-tx:qcom,msm-dai-q6-tdm-tert-tx-3: msm_dai_q6_tdm_dev_probe: Custom tdm header not supported
1898[ 2.801827] c2 1 msm-dai-tdm soc:qcom,msm-dai-tdm-quat-rx: msm_dai_tdm_q6_probe: dev_name: soc:qcom,msm-dai-tdm-quat-rx group_id: 0x9130
1899[ 2.801955] c2 1 msm-dai-q6-tdm soc:qcom,msm-dai-tdm-quat-rx:qcom,msm-dai-q6-tdm-quat-rx-0: msm_dai_q6_tdm_dev_probe: dev_name: soc:qcom,msm-dai-tdm-quat-rx:qcom,msm-dai-q6-tdm-quat-rx-0 dev_id: 0x9030
1900[ 2.801963] c2 1 msm-dai-q6-tdm soc:qcom,msm-dai-tdm-quat-rx:qcom,msm-dai-q6-tdm-quat-rx-0: msm_dai_q6_tdm_dev_probe: Custom tdm header not supported
1901[ 2.802095] c2 1 msm-dai-q6-tdm soc:qcom,msm-dai-tdm-quat-rx:qcom,msm-dai-q6-tdm-quat-rx-1: msm_dai_q6_tdm_dev_probe: dev_name: soc:qcom,msm-dai-tdm-quat-rx:qcom,msm-dai-q6-tdm-quat-rx-1 dev_id: 0x9032
1902[ 2.802102] c2 1 msm-dai-q6-tdm soc:qcom,msm-dai-tdm-quat-rx:qcom,msm-dai-q6-tdm-quat-rx-1: msm_dai_q6_tdm_dev_probe: Custom tdm header not supported
1903[ 2.802230] c2 1 msm-dai-q6-tdm soc:qcom,msm-dai-tdm-quat-rx:qcom,msm-dai-q6-tdm-quat-rx-2: msm_dai_q6_tdm_dev_probe: dev_name: soc:qcom,msm-dai-tdm-quat-rx:qcom,msm-dai-q6-tdm-quat-rx-2 dev_id: 0x9034
1904[ 2.802238] c2 1 msm-dai-q6-tdm soc:qcom,msm-dai-tdm-quat-rx:qcom,msm-dai-q6-tdm-quat-rx-2: msm_dai_q6_tdm_dev_probe: Custom tdm header not supported
1905[ 2.802373] c2 1 msm-dai-q6-tdm soc:qcom,msm-dai-tdm-quat-rx:qcom,msm-dai-q6-tdm-quat-rx-3: msm_dai_q6_tdm_dev_probe: dev_name: soc:qcom,msm-dai-tdm-quat-rx:qcom,msm-dai-q6-tdm-quat-rx-3 dev_id: 0x9036
1906[ 2.802380] c2 1 msm-dai-q6-tdm soc:qcom,msm-dai-tdm-quat-rx:qcom,msm-dai-q6-tdm-quat-rx-3: msm_dai_q6_tdm_dev_probe: Custom tdm header not supported
1907[ 2.802399] c2 1 msm-dai-tdm soc:qcom,msm-dai-tdm-quat-tx: msm_dai_tdm_q6_probe: dev_name: soc:qcom,msm-dai-tdm-quat-tx group_id: 0x9131
1908[ 2.802529] c2 1 msm-dai-q6-tdm soc:qcom,msm-dai-tdm-quat-tx:qcom,msm-dai-q6-tdm-quat-tx-0: msm_dai_q6_tdm_dev_probe: dev_name: soc:qcom,msm-dai-tdm-quat-tx:qcom,msm-dai-q6-tdm-quat-tx-0 dev_id: 0x9031
1909[ 2.802536] c2 1 msm-dai-q6-tdm soc:qcom,msm-dai-tdm-quat-tx:qcom,msm-dai-q6-tdm-quat-tx-0: msm_dai_q6_tdm_dev_probe: Custom tdm header not supported
1910[ 2.802668] c2 1 msm-dai-q6-tdm soc:qcom,msm-dai-tdm-quat-tx:qcom,msm-dai-q6-tdm-quat-tx-1: msm_dai_q6_tdm_dev_probe: dev_name: soc:qcom,msm-dai-tdm-quat-tx:qcom,msm-dai-q6-tdm-quat-tx-1 dev_id: 0x9033
1911[ 2.802675] c2 1 msm-dai-q6-tdm soc:qcom,msm-dai-tdm-quat-tx:qcom,msm-dai-q6-tdm-quat-tx-1: msm_dai_q6_tdm_dev_probe: Custom tdm header not supported
1912[ 2.802809] c2 1 msm-dai-q6-tdm soc:qcom,msm-dai-tdm-quat-tx:qcom,msm-dai-q6-tdm-quat-tx-2: msm_dai_q6_tdm_dev_probe: dev_name: soc:qcom,msm-dai-tdm-quat-tx:qcom,msm-dai-q6-tdm-quat-tx-2 dev_id: 0x9035
1913[ 2.802816] c2 1 msm-dai-q6-tdm soc:qcom,msm-dai-tdm-quat-tx:qcom,msm-dai-q6-tdm-quat-tx-2: msm_dai_q6_tdm_dev_probe: Custom tdm header not supported
1914[ 2.802948] c2 1 msm-dai-q6-tdm soc:qcom,msm-dai-tdm-quat-tx:qcom,msm-dai-q6-tdm-quat-tx-3: msm_dai_q6_tdm_dev_probe: dev_name: soc:qcom,msm-dai-tdm-quat-tx:qcom,msm-dai-q6-tdm-quat-tx-3 dev_id: 0x9037
1915[ 2.802955] c2 1 msm-dai-q6-tdm soc:qcom,msm-dai-tdm-quat-tx:qcom,msm-dai-q6-tdm-quat-tx-3: msm_dai_q6_tdm_dev_probe: Custom tdm header not supported
1916[ 2.805298] c2 1 msm-compr-dsp soc:qcom,msm-compr-dsp: msm_compr_probe: dev name soc:qcom,msm-compr-dsp
1917[ 2.814087] c2 1 [AUD] snd_soc_msm8996: uart_gpios_init done
1918[ 2.814099] c2 1 [AUD] snd_soc_msm8996: aud,uart-disable-mbhc is not set
1919[ 2.814107] c2 1 msm8996-asoc-snd soc:sound-9335: property qcom,tfa9888-reset-gpio not detected in node /soc/sound-9335
1920[ 2.814146] c2 1 [AUD] snd_soc_msm8996: msm8994_init_ftm_btpcm: btpcm gpio ftm-btpcm-dout no 67
1921[ 2.814166] c2 1 [AUD] snd_soc_msm8996: msm8994_init_ftm_btpcm: btpcm gpio ftm-btpcm-din no 68
1922[ 2.814185] c2 1 [AUD] snd_soc_msm8996: msm8994_init_ftm_btpcm: btpcm gpio ftm-btpcm-clock no 65
1923[ 2.814204] c2 1 [AUD] snd_soc_msm8996: msm8994_init_ftm_btpcm: btpcm gpio ftm-btpcm-sync no 66
1924[ 2.814223] c2 1 [AUD] snd_soc_msm8996: htc_msm8996_parse_gpio: gpio rcv-amp-gpio-en no 31
1925[ 2.815641] c2 1 msm8996-asoc-snd soc:sound-9335: ASoC: platform (null) not registered
1926[ 2.817598] c2 1 GACT probability NOT on
1927[ 2.817615] c2 1 Mirror/redirect action on
1928[ 2.817631] c2 1 u32 classifier
1929[ 2.817635] c2 1 Actions configured
1930[ 2.817654] c2 1 Netfilter messages via NETLINK v0.30.
1931[ 2.817681] c2 1 nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
1932[ 2.817844] c2 1 ctnetlink v0.93: registering with nfnetlink.
1933[ 2.818149] c2 1 xt_time: kernel timezone is -0000
1934[ 2.818267] c2 1 ip_tables: (C) 2000-2006 Netfilter Core Team
1935[ 2.818331] c2 1 arp_tables: (C) 2002 David S. Miller
1936[ 2.818354] c2 1 TCP: cubic registered
1937[ 2.818360] c2 1 Initializing XFRM netlink socket
1938[ 2.818520] c2 1 NET: Registered protocol family 10
1939[ 2.819035] c2 1 mip6: Mobile IPv6
1940[ 2.819052] c2 1 ip6_tables: (C) 2000-2006 Netfilter Core Team
1941[ 2.819120] c2 1 sit: IPv6 over IPv4 tunneling driver
1942[ 2.819329] c2 1 NET: Registered protocol family 17
1943[ 2.819345] c2 1 NET: Registered protocol family 15
1944[ 2.819370] c2 1 bridge: automatic filtering via arp/ip/ip6tables has been deprecated. Update your scripts to load br_netfilter if you need this.
1945[ 2.819383] c2 1 Bridge firewalling registered
1946[ 2.819390] c2 1 Ebtables v2.0 registered
1947[ 2.819538] Bluetooth: 0000000000000000
1948[ 2.819546] c2 1 Bluetooth: 0000000000000000Bluetooth: 0000000000000000
1949[ 2.819572] c2 1 Bluetooth: 0000000000000000Bluetooth: 0000000000000000
1950[ 2.819580] c2 1 Bluetooth: 0000000000000000Bluetooth: 0000000000000000
1951[ 2.819591] c2 1 Bluetooth: 0000000000000000[ 2.819619] c2 1 l2tp_core: L2TP core driver, V2.0
1952[ 2.819629] c2 1 l2tp_ppp: PPPoL2TP kernel driver, V2.0
1953[ 2.819635] c2 1 l2tp_ip: L2TP IP encapsulation support (L2TPv3)
1954[ 2.819649] c2 1 l2tp_netlink: L2TP netlink interface
1955[ 2.819665] c2 1 l2tp_eth: L2TP ethernet pseudowire support (L2TPv3)
1956[ 2.819677] c2 1 l2tp_debugfs: L2TP debugfs support
1957[ 2.819683] c2 1 l2tp_ip6: L2TP IP encapsulation support for IPv6 (L2TPv3)
1958[ 2.820572] c2 1 NET: Registered protocol family 27
1959[ 2.822540] c1 58 usb_otg_vreg: no parameters
1960[ 2.822591] c1 58 reg-fixed-voltage soc:usb-otg-switch: Failed to find supply vin
1961[ 2.822648] c1 58 reg-fixed-voltage soc:usb-otg-switch: Failed to register regulator: -517
1962[ 2.825257] c1 58 subsys-pil-tz 9300000.qcom,lpass: for adsp segments only will be dumped.
1963[ 2.826840] c1 58 subsys-pil-tz 1c00000.qcom,ssc: for slpi segments only will be dumped.
1964[ 2.828597] c1 58 pil-q6v5-mss 2080000.qcom,mss: Failed to find the pas_id.
1965[ 2.829116] c1 58 pil-q6v5-mss 2080000.qcom,mss: for modem segments only will be dumped.
1966[ 2.831724] sps:BAM 0x0000000000000000 is registered.
1967[ 2.833331] c1 58 qpnp-smbcharger qpnp-smbcharger-16: node /soc/qcom,spmi@400f000/qcom,pmi8994@2/qcom,qpnp-smbcharger IO resource absent!
1968[ 2.833384] c1 58 SMBCHG: smbchg_check_chg_version: PMI8996 version = v1.1
1969[ 2.833567] c1 58 smbcharger_charger_otg: no parameters
1970[ 2.833694] c1 58 smbcharger_external_otg: no parameters
1971[ 2.833750] c1 58 smbcharger_external_otg: supplied by pmi8994_boost_5v
1972[ 2.834155] c1 58 SMBCHG: battchg_suspend: 1 voting for 0 - on
1973[ 2.834182] c1 58 SMBCHG: usb_suspend: 7 voting for 0 - off
1974[ 2.834577] c1 58 SMBCHG: usb_suspend: 0 voting for 0 - off
1975[ 2.834583] c1 58 SMBCHG: dc_suspend: 0 voting for 0 - off
1976[ 2.834641] c1 58 SMBCHG: dcl_icl: 0 voting for 1500 - on
1977[ 2.834683] c1 58 SMBCHG: fcc: 1 voting for 3200 - on
1978[ 2.834860] c1 58 SMBCHG: hwaicl_enable_indirect: 0 voting for 0 - on
1979[ 2.834865] c1 58 SMBCHG: hwaicl_disable: 0 voting for 0 - off
1980[ 2.835317] c1 18 SMBCHG: smbchg_clean_tcc_WA_work: called before init
1981[ 2.856872] c1 58 SMBCHG: hwaicl_disable: 1 voting for 0 - off
1982[ 2.856880] c1 58 SMBCHG: usb_suspend: 6 voting for 0 - off
1983[ 2.856941] c1 58 SMBCHG: usb_icl: 0 voting for 100 - on
1984[ 2.856947] c1 58 SMBCHG: usb_suspend: 2 voting for 0 - off
1985[ 2.857191] c1 58 SMB1351 smb1351_parallel_set_chg_present: set slave present = 0 -> 1
1986[ 2.859384] c1 58 SMB1351 smb1351_usb_suspend: reason = 4 requested_suspend = 1 suspended_status = 0 -> 4
1987[ 2.859628] c1 58 SMB1351 smb1351_usb_suspend: reason = 16 requested_suspend = 0 suspended_status = 4 -> 4
1988[ 2.880674] c1 104 [USB] USB3_QSERDES_TX_DRV_LVL = 0x13
1989[ 2.886441] c1 58 qpnp-smbcharger qpnp-smbcharger-16: node /soc/qcom,spmi@400f000/qcom,pmi8994@2/qcom,qpnp-smbcharger IO resource absent!
1990[ 2.886461] c1 58 smbchg_debug_mask=0x6
1991[ 2.886481] c1 104 SMBCHG: battchg_suspend: 1 voting for 0 - on
1992[ 2.886518] c1 104 SMBCHG: smbchg_cc_esr_wa_check: Not in fast charge, skipping
1993[ 2.886524] c1 104 SMBCHG: smbchg_external_power_changed: usb type = 4, current_limit = 0, rc = 0
1994[ 2.886529] c1 104 SMBCHG: usb_icl: 0 voting for 0 - on
1995[ 2.886535] c1 104 SMBCHG: smbchg_set_usb_current_max: USB current_ma = 0
1996[ 2.886540] c1 104 SMBCHG: usb_suspend: 2 voting for 0 - on
1997[ 2.886564] c1 104 SMBCHG: smbchg_set_usb_current_max: usb type = 4 current set to 0 mA
1998[ 2.886581] c1 104 SMBCHG: smbchg_stay_awake: staying awake: 0x02 (bit 2)
1999[ 2.886586] c1 104 SMBCHG: smbchg_vfloat_adjust_check: Starting vfloat adjustments
2000[ 2.886620] c0 384 SMBCHG: power_ok_handler: triggered: 0x00. prev_power_ok(-1) power_ok(0)
2001[ 2.886627] c1 104 SMBCHG: smbchg_relax: relaxing: 0x00 (bit 2)
2002[ 2.886869] c1 58 SMBCHG: rerun_hvdcp_det_if_necessary: HVDCP not support, return directly
2003[ 2.889696] c1 58 qpnp-smbcharger qpnp-smbcharger-16: SMBCHG successfully probe Charger version=SCHG Revision DIG:2.0 ANA:2.1 batt=1 dc=0 usb=1
2004[ 2.889702] c1 58 [BATT] Probe process: (0, 2)
2005[ 2.889753] c1 58 SMBCHG: handle_usb_insertion: triggered
2006[ 2.889777] SMBCHG: handle_usb_insertion: inserted type = 4 (SDP)
2007[ 2.889782] c1 58 SMBCHG: smbchg_change_usb_supply_type: Type 4: setting mA = 100
2008[ 2.889788] c1 58 SMBCHG: usb_icl: 0 voting for 100 - on
2009[ 2.889793] c1 58 SMBCHG: smbchg_set_usb_current_max: USB current_ma = 100
2010[ 2.889798] c1 58 SMBCHG: usb_suspend: 2 voting for 0 - off
2011[ 2.889889] c0 384 SMBCHG: power_ok_handler: triggered: 0x01. prev_power_ok(0) power_ok(1)
2012[ 2.889895] c1 58 SMBCHG: smbchg_set_usb_current_max: usb type = 4 current set to 100 mA
2013[ 2.889909] c1 58 SMBCHG: smbchg_stay_awake: staying awake: 0x01 (bit 1)
2014[ 2.889990] c1 363 SMBCHG: battchg_suspend: 1 voting for 0 - on
2015[ 2.889998] c1 363 SMBCHG: smbchg_external_power_changed: usb type = 4, current_limit = 0, rc = 0
2016[ 2.890003] c1 363 SMBCHG: usb_icl: 0 voting for 0 - on
2017[ 2.890007] c1 363 SMBCHG: smbchg_set_usb_current_max: USB current_ma = 0
2018[ 2.890011] c1 363 SMBCHG: usb_suspend: 2 voting for 0 - on
2019[ 2.890053] c1 363 SMBCHG: smbchg_set_usb_current_max: usb type = 4 current set to 0 mA
2020[ 2.890070] c1 363 SMBCHG: smbchg_vfloat_adjust_check: Starting vfloat adjustments
2021[ 2.890103] c0 384 SMBCHG: power_ok_handler: triggered: 0x00.
2022[ 2.890355] c1 363 SMBCHG: battchg_suspend: 1 voting for 0 - on
2023[ 2.890362] c1 363 SMBCHG: smbchg_external_power_changed: usb type = 4, current_limit = 0, rc = 0
2024[ 2.890367] c1 363 SMBCHG: smbchg_vfloat_adjust_check: Starting vfloat adjustments
2025[ 2.890599] c1 363 SMBCHG: battchg_suspend: 1 voting for 0 - on
2026[ 2.890605] c1 363 SMBCHG: smbchg_external_power_changed: usb type = 4, current_limit = 0, rc = 0
2027[ 2.890610] c1 363 SMBCHG: smbchg_vfloat_adjust_check: Starting vfloat adjustments
2028[ 2.890834] SMBCHG: pmi8994_boot_update_usb_status: Update usb type!
2029[ 2.890845] c1 58 SMBCHG: smbchg_rerun_aicl: Rerunning AICL...
2030[ 2.944507] c1 58 [AUD] snd_soc_msm8996: uart_gpios_init done
2031[ 2.944522] c1 58 [AUD] snd_soc_msm8996: aud,uart-disable-mbhc is not set
2032[ 2.944532] c1 58 msm8996-asoc-snd soc:sound-9335: property qcom,tfa9888-reset-gpio not detected in node /soc/sound-9335
2033[ 2.944631] c1 58 [AUD] snd_soc_msm8996: msm8994_init_ftm_btpcm: btpcm gpio ftm-btpcm-dout no 67
2034[ 2.944659] c1 58 [AUD] snd_soc_msm8996: msm8994_init_ftm_btpcm: btpcm gpio ftm-btpcm-din no 68
2035[ 2.944684] c1 58 [AUD] snd_soc_msm8996: msm8994_init_ftm_btpcm: btpcm gpio ftm-btpcm-clock no 65
2036[ 2.944709] c1 58 [AUD] snd_soc_msm8996: msm8994_init_ftm_btpcm: btpcm gpio ftm-btpcm-sync no 66
2037[ 2.944736] c1 58 [AUD] snd_soc_msm8996: htc_msm8996_parse_gpio: gpio rcv-amp-gpio-en no 31
2038[ 2.946523] c1 58 msm8996-asoc-snd soc:sound-9335: ASoC: platform (null) not registered
2039[ 2.946985] c1 58 usb_otg_vreg: no parameters
2040[ 2.947025] c1 58 usb_otg_vreg: supplied by smbcharger_external_otg
2041[ 2.948266] c1 58 [AUD] snd_soc_msm8996: uart_gpios_init done
2042[ 2.948280] c1 58 [AUD] snd_soc_msm8996: aud,uart-disable-mbhc is not set
2043[ 2.948290] c1 58 msm8996-asoc-snd soc:sound-9335: property qcom,tfa9888-reset-gpio not detected in node /soc/sound-9335
2044[ 2.948388] c1 58 [AUD] snd_soc_msm8996: msm8994_init_ftm_btpcm: btpcm gpio ftm-btpcm-dout no 67
2045[ 2.948415] c1 58 [AUD] snd_soc_msm8996: msm8994_init_ftm_btpcm: btpcm gpio ftm-btpcm-din no 68
2046[ 2.948440] c1 58 [AUD] snd_soc_msm8996: msm8994_init_ftm_btpcm: btpcm gpio ftm-btpcm-clock no 65
2047[ 2.948466] c1 58 [AUD] snd_soc_msm8996: msm8994_init_ftm_btpcm: btpcm gpio ftm-btpcm-sync no 66
2048[ 2.948491] c1 58 [AUD] snd_soc_msm8996: htc_msm8996_parse_gpio: gpio rcv-amp-gpio-en no 31
2049[ 2.950312] c1 58 msm8996-asoc-snd soc:sound-9335: ASoC: platform (null) not registered
2050[ 2.950854] c2 1 Registered cp15_barrier emulation handler
2051[ 2.950868] c2 1 Registered setend emulation handler
2052[ 2.951053] c2 1 Loading compiled-in X.509 certificates
2053[ 2.951337] c2 1 Loaded X.509 cert 'Google Inc.: Android: 34e81e2c57675086f628c1b2e4b4ade8e0a1941d'
2054[ 2.951558] c2 1 Loaded X.509 cert 'Google Inc.: Android: 7580d366b6e2804279fd88e290c82a5a7d5dd610'
2055[ 2.951783] c2 1 Loaded X.509 cert 'Android: 7e4333f9bba00adfe0ede979e28ed1920492b40f'
2056[ 2.952011] c2 1 Loaded X.509 cert 'Google Inc.: Android: 01c0e929566dbaa236b29ae14be86f003332a866'
2057[ 2.952031] c2 1 registered taskstats version 1
2058[ 2.956465] c2 1 Key type encrypted registered
2059[ 3.000224] c2 1 fastrpc soc:qcom,msm-adsprpc-mem: for adsp_rh segments only will be dumped.
2060[ 3.000286] c2 1 adsprpc: channel link type: 0
2061[ 3.008369] c1 58 [AUD] snd_soc_msm8996: uart_gpios_init done
2062[ 3.008382] c1 58 [AUD] snd_soc_msm8996: aud,uart-disable-mbhc is not set
2063[ 3.008392] c1 58 msm8996-asoc-snd soc:sound-9335: property qcom,tfa9888-reset-gpio not detected in node /soc/sound-9335
2064[ 3.008491] c1 58 [AUD] snd_soc_msm8996: msm8994_init_ftm_btpcm: btpcm gpio ftm-btpcm-dout no 67
2065[ 3.008518] c1 58 [AUD] snd_soc_msm8996: msm8994_init_ftm_btpcm: btpcm gpio ftm-btpcm-din no 68
2066[ 3.008544] c1 58 [AUD] snd_soc_msm8996: msm8994_init_ftm_btpcm: btpcm gpio ftm-btpcm-clock no 65
2067[ 3.008571] c1 58 [AUD] snd_soc_msm8996: msm8994_init_ftm_btpcm: btpcm gpio ftm-btpcm-sync no 66
2068[ 3.008597] c1 58 [AUD] snd_soc_msm8996: htc_msm8996_parse_gpio: gpio rcv-amp-gpio-en no 31
2069[ 3.010412] c1 58 msm8996-asoc-snd soc:sound-9335: ASoC: platform (null) not registered
2070[ 3.011736] RNDIS_IPA module is loaded.
2071[ 3.012238] c2 1 file system registered
2072[ 3.012274] c2 1 mbim_init: initialize 1 instances
2073[ 3.012309] c2 1 mbim_init: Initialized 1 ports
2074[ 3.012490] c1 58 [AUD] snd_soc_msm8996: uart_gpios_init done
2075[ 3.012500] c1 58 [AUD] snd_soc_msm8996: aud,uart-disable-mbhc is not set
2076[ 3.012511] c1 58 msm8996-asoc-snd soc:sound-9335: property qcom,tfa9888-reset-gpio not detected in node /soc/sound-9335
2077[ 3.012633] c1 58 [AUD] snd_soc_msm8996: msm8994_init_ftm_btpcm: btpcm gpio ftm-btpcm-dout no 67
2078[ 3.012661] c1 58 [AUD] snd_soc_msm8996: msm8994_init_ftm_btpcm: btpcm gpio ftm-btpcm-din no 68
2079[ 3.012687] c1 58 [AUD] snd_soc_msm8996: msm8994_init_ftm_btpcm: btpcm gpio ftm-btpcm-clock no 65
2080[ 3.012713] c1 58 [AUD] snd_soc_msm8996: msm8994_init_ftm_btpcm: btpcm gpio ftm-btpcm-sync no 66
2081[ 3.012738] c1 58 [AUD] snd_soc_msm8996: htc_msm8996_parse_gpio: gpio rcv-amp-gpio-en no 31
2082[ 3.012990] c2 1 rndis_qc_init: initialize rndis QC instance
2083[ 3.013094] c2 1 Number of LUNs=8
2084[ 3.013102] c2 1 Mass Storage Function, version: 2009/09/11
2085[ 3.013107] c2 1 LUN: removable file: (no medium)
2086[ 3.013120] c2 1 Number of LUNs=1
2087[ 3.013145] c2 1 LUN: removable file: (no medium)
2088[ 3.013149] c2 1 Number of LUNs=1
2089[ 3.013267] c2 1 android_usb gadget: android_usb ready
2090[ 3.014646] c1 58 msm8996-asoc-snd soc:sound-9335: ASoC: platform (null) not registered
2091[ 3.016028] [KEY] keycode = 115, gpio = 126, irq = 481
2092[ 3.016059] c3 1 [KEY] keycode = 116, gpio = 40, irq = 395[KEY] keycode = 114, gpio = 121, irq = 476
2093[ 3.016181] c3 1 input: gpio-keys as /devices/soc/soc:gpio_keys/input/input4
2094[ 3.016274] c1 58 [AUD] snd_soc_msm8996: uart_gpios_init done
2095[ 3.016284] c1 58 [AUD] snd_soc_msm8996: aud,uart-disable-mbhc is not set
2096[ 3.016295] c1 58 msm8996-asoc-snd soc:sound-9335: property qcom,tfa9888-reset-gpio not detected in node /soc/sound-9335
2097[ 3.016394] c1 58 [AUD] snd_soc_msm8996: msm8994_init_ftm_btpcm: btpcm gpio ftm-btpcm-dout no 67
2098[ 3.016422] c1 58 [AUD] snd_soc_msm8996: msm8994_init_ftm_btpcm: btpcm gpio ftm-btpcm-din no 68
2099[ 3.016450] c1 58 [AUD] snd_soc_msm8996: msm8994_init_ftm_btpcm: btpcm gpio ftm-btpcm-clock no 65
2100[ 3.016477] c1 58 [AUD] snd_soc_msm8996: msm8994_init_ftm_btpcm: btpcm gpio ftm-btpcm-sync no 66
2101[ 3.016505] c1 58 [AUD] snd_soc_msm8996: htc_msm8996_parse_gpio: gpio rcv-amp-gpio-en no 31
2102[ 3.016922] c3 1 qcom,qpnp-rtc qpnp-rtc-8: setting system clock to 1972-02-14 00:27:03 UTC (66875223)
2103[ 3.018461] c1 58 msm8996-asoc-snd soc:sound-9335: ASoC: platform (null) not registered
2104[ 3.020165] c1 58 [AUD] snd_soc_msm8996: uart_gpios_init done
2105[ 3.020178] c1 58 [AUD] snd_soc_msm8996: aud,uart-disable-mbhc is not set
2106[ 3.020188] c1 58 msm8996-asoc-snd soc:sound-9335: property qcom,tfa9888-reset-gpio not detected in node /soc/sound-9335
2107[ 3.020318] c1 58 [AUD] snd_soc_msm8996: msm8994_init_ftm_btpcm: btpcm gpio ftm-btpcm-dout no 67
2108[ 3.020347] c1 58 [AUD] snd_soc_msm8996: msm8994_init_ftm_btpcm: btpcm gpio ftm-btpcm-din no 68
2109[ 3.020374] c1 58 [AUD] snd_soc_msm8996: msm8994_init_ftm_btpcm: btpcm gpio ftm-btpcm-clock no 65
2110[ 3.020402] c1 58 [AUD] snd_soc_msm8996: msm8994_init_ftm_btpcm: btpcm gpio ftm-btpcm-sync no 66
2111[ 3.020430] c1 58 [AUD] snd_soc_msm8996: htc_msm8996_parse_gpio: gpio rcv-amp-gpio-en no 31
2112[ 3.022368] c1 58 msm8996-asoc-snd soc:sound-9335: ASoC: platform (null) not registered
2113[ 3.024304] c3 1 lmh_lite:lmh_parse_sensor Registering sensor:[DLMt_APC1]
2114[ 3.024350] c1 58 [AUD] snd_soc_msm8996: uart_gpios_init done
2115[ 3.024360] c1 58 [AUD] snd_soc_msm8996: aud,uart-disable-mbhc is not set
2116[ 3.024370] c1 58 msm8996-asoc-snd soc:sound-9335: property qcom,tfa9888-reset-gpio not detected in node /soc/sound-9335
2117[ 3.024474] c1 58 [AUD] snd_soc_msm8996: msm8994_init_ftm_btpcm: btpcm gpio ftm-btpcm-dout no 67
2118[ 3.024501] c1 58 [AUD] snd_soc_msm8996: msm8994_init_ftm_btpcm: btpcm gpio ftm-btpcm-din no 68
2119[ 3.024530] c1 58 [AUD] snd_soc_msm8996: msm8994_init_ftm_btpcm: btpcm gpio ftm-btpcm-clock no 65
2120[ 3.024553] c3 1 lmh_lite:lmh_parse_sensor Registering sensor:[LLM_cp00]
2121[ 3.024566] c1 58 [AUD] snd_soc_msm8996: msm8994_init_ftm_btpcm: btpcm gpio ftm-btpcm-sync no 66
2122[ 3.024598] c1 58 [AUD] snd_soc_msm8996: htc_msm8996_parse_gpio: gpio rcv-amp-gpio-en no 31
2123[ 3.024679] c3 1 lmh_lite:lmh_parse_sensor Registering sensor:[LLM_cp01]
2124[ 3.024801] c3 1 lmh_lite:lmh_parse_sensor Registering sensor:[LLM_cp10]
2125[ 3.024922] c3 1 lmh_lite:lmh_parse_sensor Registering sensor:[LLM_cp11]
2126[ 3.025047] c3 1 lmh_lite:lmh_parse_sensor Registering sensor:[LLM_m4m0]
2127[ 3.025169] c3 1 lmh_lite:lmh_parse_sensor Registering sensor:[LLM_l21-]
2128[ 3.025290] c3 1 lmh_lite:lmh_parse_sensor Registering sensor:[LLM_l20-]
2129[ 3.026396] c1 58 msm8996-asoc-snd soc:sound-9335: ASoC: platform (null) not registered
2130[ 3.027347] c3 1 parse_cpu_levels: idx 1 545
2131[ 3.027356] c3 1 parse_cpu_levels: idx 2 6022
2132[ 3.027360] c3 1 parse_cpu_levels: idx 2 11499
2133[ 3.027413] c3 1 parse_cpu_levels: idx 1 545
2134[ 3.027417] c3 1 parse_cpu_levels: idx 2 6022
2135[ 3.027420] c3 1 parse_cpu_levels: idx 2 11499
2136[ 3.028000] c1 58 [AUD] snd_soc_msm8996: uart_gpios_init done
2137[ 3.028012] c1 58 [AUD] snd_soc_msm8996: aud,uart-disable-mbhc is not set
2138[ 3.028022] c1 58 msm8996-asoc-snd soc:sound-9335: property qcom,tfa9888-reset-gpio not detected in node /soc/sound-9335
2139[ 3.028123] c1 58 [AUD] snd_soc_msm8996: msm8994_init_ftm_btpcm: btpcm gpio ftm-btpcm-dout no 67
2140[ 3.028152] c1 58 [AUD] snd_soc_msm8996: msm8994_init_ftm_btpcm: btpcm gpio ftm-btpcm-din no 68
2141[ 3.028180] c1 58 [AUD] snd_soc_msm8996: msm8994_init_ftm_btpcm: btpcm gpio ftm-btpcm-clock no 65
2142[ 3.028207] c1 58 [AUD] snd_soc_msm8996: msm8994_init_ftm_btpcm: btpcm gpio ftm-btpcm-sync no 66
2143[ 3.028235] c1 58 [AUD] snd_soc_msm8996: htc_msm8996_parse_gpio: gpio rcv-amp-gpio-en no 31
2144[ 3.030194] c1 58 msm8996-asoc-snd soc:sound-9335: ASoC: platform (null) not registered
2145[ 3.030724] c3 1 [FLT] qpnp_flash_led_probe: ++
2146[ 3.030868] c3 1 [FLT] flash_strobe = 22
2147[ 3.030878] c3 1 qcom,qpnp-flash-led qpnp-flash-led-25: Unable to acquire pinctrl
2148[ 3.031637] c1 58 [AUD] snd_soc_msm8996: uart_gpios_init done
2149[ 3.031649] c1 58 [AUD] snd_soc_msm8996: aud,uart-disable-mbhc is not set
2150[ 3.031658] c1 58 msm8996-asoc-snd soc:sound-9335: property qcom,tfa9888-reset-gpio not detected in node /soc/sound-9335
2151[ 3.031762] c1 58 [AUD] snd_soc_msm8996: msm8994_init_ftm_btpcm: btpcm gpio ftm-btpcm-dout no 67
2152[ 3.031791] c1 58 [AUD] snd_soc_msm8996: msm8994_init_ftm_btpcm: btpcm gpio ftm-btpcm-din no 68
2153[ 3.031817] c1 58 [AUD] snd_soc_msm8996: msm8994_init_ftm_btpcm: btpcm gpio ftm-btpcm-clock no 65
2154[ 3.031844] c1 58 [AUD] snd_soc_msm8996: msm8994_init_ftm_btpcm: btpcm gpio ftm-btpcm-sync no 66
2155[ 3.031870] c1 58 [AUD] snd_soc_msm8996: htc_msm8996_parse_gpio: gpio rcv-amp-gpio-en no 31
2156[ 3.031904] c3 1 [FLT] qpnp_flash_led_probe: --
2157[ 3.033612] c3 1 rmnet_ipa started initialization
2158[ 3.033628] c3 1 IPA SSR support = True
2159[ 3.033632] c3 1 IPA ipa-loaduC = True
2160[ 3.033636] c3 1 IPA SG support = True
2161[ 3.033760] c1 58 msm8996-asoc-snd soc:sound-9335: ASoC: platform (null) not registered
2162[ 3.035193] c3 1 ipa ipa_sps_irq_control_all:937 EP (5) not allocated.
2163[ 3.035203] c3 1 ipa ipa2_uc_state_check:301 uC is not loaded
2164[ 3.035278] c1 58 [AUD] snd_soc_msm8996: uart_gpios_init done
2165[ 3.035289] c1 58 [AUD] snd_soc_msm8996: aud,uart-disable-mbhc is not set
2166[ 3.035299] c1 58 msm8996-asoc-snd soc:sound-9335: property qcom,tfa9888-reset-gpio not detected in node /soc/sound-9335
2167[ 3.035421] c1 58 [AUD] snd_soc_msm8996: msm8994_init_ftm_btpcm: btpcm gpio ftm-btpcm-dout no 67
2168[ 3.035451] c1 58 [AUD] snd_soc_msm8996: msm8994_init_ftm_btpcm: btpcm gpio ftm-btpcm-din no 68
2169[ 3.035477] c1 58 [AUD] snd_soc_msm8996: msm8994_init_ftm_btpcm: btpcm gpio ftm-btpcm-clock no 65
2170[ 3.035505] c1 58 [AUD] snd_soc_msm8996: msm8994_init_ftm_btpcm: btpcm gpio ftm-btpcm-sync no 66
2171[ 3.035535] c1 58 [AUD] snd_soc_msm8996: htc_msm8996_parse_gpio: gpio rcv-amp-gpio-en no 31
2172[ 3.035974] c3 1 rmnet_ipa completed initialization
2173[ 3.037453] c1 58 msm8996-asoc-snd soc:sound-9335: ASoC: platform (null) not registered
2174[ 3.038850] c1 58 [AUD] snd_soc_msm8996: uart_gpios_init done
2175[ 3.038863] c1 58 [AUD] snd_soc_msm8996: aud,uart-disable-mbhc is not set
2176[ 3.038873] c1 58 msm8996-asoc-snd soc:sound-9335: property qcom,tfa9888-reset-gpio not detected in node /soc/sound-9335
2177[ 3.038970] c1 58 [AUD] snd_soc_msm8996: msm8994_init_ftm_btpcm: btpcm gpio ftm-btpcm-dout no 67
2178[ 3.038996] c1 58 [AUD] snd_soc_msm8996: msm8994_init_ftm_btpcm: btpcm gpio ftm-btpcm-din no 68
2179[ 3.039022] c1 58 [AUD] snd_soc_msm8996: msm8994_init_ftm_btpcm: btpcm gpio ftm-btpcm-clock no 65
2180[ 3.039046] c1 58 [AUD] snd_soc_msm8996: msm8994_init_ftm_btpcm: btpcm gpio ftm-btpcm-sync no 66
2181[ 3.039072] c1 58 [AUD] snd_soc_msm8996: htc_msm8996_parse_gpio: gpio rcv-amp-gpio-en no 31
2182[ 3.039828] c3 1 qcom,cc-debug-8996 362000.qcom,cc-debug: Registered debug mux.
2183[ 3.041206] c1 58 msm8996-asoc-snd soc:sound-9335: ASoC: platform (null) not registered
2184[ 3.041552] c3 1 apc0_pwrcl_mem_acc_corner: disabling
2185[ 3.041560] c3 1 apc1_perfcl_mem_acc_corner: disabling
2186[ 3.041564] c3 1 apcc_l3_mem_acc_corner: disabling
2187[ 3.041569] c3 1 gfx_mem_acc_corner: disabling
2188[ 3.041573] c3 1 kryo0-retention: disabling
2189[ 3.041578] c3 1 kryo1-retention: disabling
2190[ 3.041631] c3 1 gdsc_mmagic_bimc: disabling
2191[ 3.041636] c3 1 rome_vreg: disabling
2192[ 3.041688] c3 1 usb_otg_vreg: disabling
2193[ 3.041695] c3 1 regulator_proxy_consumer_remove_all: removing regulator proxy consumer requests
2194[ 3.042006] c3 1 clock_late_init: Removing enables held for handed-off clocks
2195[ 3.042698] c1 58 [AUD] snd_soc_msm8996: uart_gpios_init done
2196[ 3.042710] c1 58 [AUD] snd_soc_msm8996: aud,uart-disable-mbhc is not set
2197[ 3.042719] c1 58 msm8996-asoc-snd soc:sound-9335: property qcom,tfa9888-reset-gpio not detected in node /soc/sound-9335
2198[ 3.042836] c1 58 [AUD] snd_soc_msm8996: msm8994_init_ftm_btpcm: btpcm gpio ftm-btpcm-dout no 67
2199[ 3.042863] c1 58 [AUD] snd_soc_msm8996: msm8994_init_ftm_btpcm: btpcm gpio ftm-btpcm-din no 68
2200[ 3.042889] c1 58 [AUD] snd_soc_msm8996: msm8994_init_ftm_btpcm: btpcm gpio ftm-btpcm-clock no 65
2201[ 3.042918] c1 58 [AUD] snd_soc_msm8996: msm8994_init_ftm_btpcm: btpcm gpio ftm-btpcm-sync no 66
2202[ 3.042947] c1 58 [AUD] snd_soc_msm8996: htc_msm8996_parse_gpio: gpio rcv-amp-gpio-en no 31
2203[ 3.044725] c2 58 msm8996-asoc-snd soc:sound-9335: ASoC: platform (null) not registered
2204[ 3.045858] c3 1 ALSA device list:
2205[ 3.045863] c3 1 No soundcards found.
2206[ 3.045913] c3 1 Warning: unable to open an initial console.
2207[ 3.045990] c3 1 Freeing unused kernel memory: 492K (0000000000000000 - 0000000000000000)
2208[ 3.046004] c3 1 Freeing alternatives memory: 100K (0000000000000000 - 0000000000000000)
2209[ 3.048092] c3 1 init: init first stage started!
2210[ 3.048120] c3 1 init: First stage mount skipped (recovery mode)
2211[ 3.048287] c3 1 init: Using Android DT directory /proc/device-tree/firmware/android/
2212[ 3.048349] c3 1 init: Skipped setting INIT_AVB_VERSION (not vbmeta compatible)
2213[ 3.048365] c3 1 init: Loading SELinux policy
2214[ 3.053640] c3 1 SELinux: Permission transition in class filesystem not defined in policy.
2215[ 3.053664] c3 1 SELinux: Permission swapon in class file not defined in policy.
2216[ 3.053673] c3 1 SELinux: Permission swapon in class dir not defined in policy.
2217[ 3.053685] c3 1 SELinux: Permission swapon in class lnk_file not defined in policy.
2218[ 3.053691] c3 1 SELinux: Permission swapon in class chr_file not defined in policy.
2219[ 3.053698] c3 1 SELinux: Permission swapon in class blk_file not defined in policy.
2220[ 3.053706] c3 1 SELinux: Permission swapon in class sock_file not defined in policy.
2221[ 3.053713] c3 1 SELinux: Permission swapon in class fifo_file not defined in policy.
2222[ 3.053728] c3 1 SELinux: Permission recv_msg in class socket not defined in policy.
2223[ 3.053731] c3 1 SELinux: Permission send_msg in class socket not defined in policy.
2224[ 3.053737] c3 1 SELinux: Permission recv_msg in class tcp_socket not defined in policy.
2225[ 3.053741] c3 1 SELinux: Permission send_msg in class tcp_socket not defined in policy.
2226[ 3.053744] c3 1 SELinux: Permission connectto in class tcp_socket not defined in policy.
2227[ 3.053748] c3 1 SELinux: Permission newconn in class tcp_socket not defined in policy.
2228[ 3.053751] c3 1 SELinux: Permission acceptfrom in class tcp_socket not defined in policy.
2229[ 3.053759] c3 1 SELinux: Permission recv_msg in class udp_socket not defined in policy.
2230[ 3.053762] c3 1 SELinux: Permission send_msg in class udp_socket not defined in policy.
2231[ 3.053768] c3 1 SELinux: Permission recv_msg in class rawip_socket not defined in policy.
2232[ 3.053771] c3 1 SELinux: Permission send_msg in class rawip_socket not defined in policy.
2233[ 3.053776] c3 1 SELinux: Permission tcp_recv in class node not defined in policy.
2234[ 3.053779] c3 1 SELinux: Permission tcp_send in class node not defined in policy.
2235[ 3.053783] c3 1 SELinux: Permission udp_recv in class node not defined in policy.
2236[ 3.053786] c3 1 SELinux: Permission udp_send in class node not defined in policy.
2237[ 3.053789] c3 1 SELinux: Permission rawip_recv in class node not defined in policy.
2238[ 3.053792] c3 1 SELinux: Permission rawip_send in class node not defined in policy.
2239[ 3.053796] c3 1 SELinux: Permission enforce_dest in class node not defined in policy.
2240[ 3.053799] c3 1 SELinux: Permission dccp_recv in class node not defined in policy.
2241[ 3.053802] c3 1 SELinux: Permission dccp_send in class node not defined in policy.
2242[ 3.053808] c3 1 SELinux: Permission tcp_recv in class netif not defined in policy.
2243[ 3.053811] c3 1 SELinux: Permission tcp_send in class netif not defined in policy.
2244[ 3.053815] c3 1 SELinux: Permission udp_recv in class netif not defined in policy.
2245[ 3.053818] c3 1 SELinux: Permission udp_send in class netif not defined in policy.
2246[ 3.053821] c3 1 SELinux: Permission rawip_recv in class netif not defined in policy.
2247[ 3.053824] c3 1 SELinux: Permission rawip_send in class netif not defined in policy.
2248[ 3.053827] c3 1 SELinux: Permission dccp_recv in class netif not defined in policy.
2249[ 3.053830] c3 1 SELinux: Permission dccp_send in class netif not defined in policy.
2250[ 3.053837] c3 1 SELinux: Permission recv_msg in class netlink_socket not defined in policy.
2251[ 3.053840] c3 1 SELinux: Permission send_msg in class netlink_socket not defined in policy.
2252[ 3.053845] c3 1 SELinux: Permission recv_msg in class packet_socket not defined in policy.
2253[ 3.053849] c3 1 SELinux: Permission send_msg in class packet_socket not defined in policy.
2254[ 3.053854] c3 1 SELinux: Permission recv_msg in class key_socket not defined in policy.
2255[ 3.053857] c3 1 SELinux: Permission send_msg in class key_socket not defined in policy.
2256[ 3.053863] c3 1 SELinux: Permission recv_msg in class unix_stream_socket not defined in policy.
2257[ 3.053866] c3 1 SELinux: Permission send_msg in class unix_stream_socket not defined in policy.
2258[ 3.053871] c3 1 SELinux: Permission newconn in class unix_stream_socket not defined in policy.
2259[ 3.053874] c3 1 SELinux: Permission acceptfrom in class unix_stream_socket not defined in policy.
2260[ 3.053880] c3 1 SELinux: Permission recv_msg in class unix_dgram_socket not defined in policy.
2261[ 3.053883] c3 1 SELinux: Permission send_msg in class unix_dgram_socket not defined in policy.
2262[ 3.053901] c3 1 SELinux: Permission recv_msg in class netlink_route_socket not defined in policy.
2263[ 3.053905] c3 1 SELinux: Permission send_msg in class netlink_route_socket not defined in policy.
2264[ 3.053910] c3 1 SELinux: Class netlink_firewall_socket not defined in policy.
2265[ 3.053915] c3 1 SELinux: Permission recv_msg in class netlink_tcpdiag_socket not defined in policy.
2266[ 3.053918] c3 1 SELinux: Permission send_msg in class netlink_tcpdiag_socket not defined in policy.
2267[ 3.053925] c3 1 SELinux: Permission recv_msg in class netlink_nflog_socket not defined in policy.
2268[ 3.053928] c3 1 SELinux: Permission send_msg in class netlink_nflog_socket not defined in policy.
2269[ 3.053933] c3 1 SELinux: Permission recv_msg in class netlink_xfrm_socket not defined in policy.
2270[ 3.053937] c3 1 SELinux: Permission send_msg in class netlink_xfrm_socket not defined in policy.
2271[ 3.053943] c3 1 SELinux: Permission recv_msg in class netlink_selinux_socket not defined in policy.
2272[ 3.053946] c3 1 SELinux: Permission send_msg in class netlink_selinux_socket not defined in policy.
2273[ 3.053951] c3 1 SELinux: Permission recv_msg in class netlink_audit_socket not defined in policy.
2274[ 3.053954] c3 1 SELinux: Permission send_msg in class netlink_audit_socket not defined in policy.
2275[ 3.053960] c3 1 SELinux: Class netlink_ip6fw_socket not defined in policy.
2276[ 3.053966] c3 1 SELinux: Permission recv_msg in class netlink_dnrt_socket not defined in policy.
2277[ 3.053969] c3 1 SELinux: Permission send_msg in class netlink_dnrt_socket not defined in policy.
2278[ 3.053977] c3 1 SELinux: Permission recv_msg in class netlink_kobject_uevent_socket not defined in policy.
2279[ 3.053980] c3 1 SELinux: Permission send_msg in class netlink_kobject_uevent_socket not defined in policy.
2280[ 3.053985] c3 1 SELinux: Permission recv_msg in class appletalk_socket not defined in policy.
2281[ 3.053989] c3 1 SELinux: Permission send_msg in class appletalk_socket not defined in policy.
2282[ 3.054001] c3 1 SELinux: Permission recv_msg in class dccp_socket not defined in policy.
2283[ 3.054004] c3 1 SELinux: Permission send_msg in class dccp_socket not defined in policy.
2284[ 3.054017] c3 1 SELinux: Permission recv_msg in class tun_socket not defined in policy.
2285[ 3.054021] c3 1 SELinux: Permission send_msg in class tun_socket not defined in policy.
2286[ 3.054029] c3 1 SELinux: Permission recv_msg in class can_socket not defined in policy.
2287[ 3.054032] c3 1 SELinux: Permission send_msg in class can_socket not defined in policy.
2288[ 3.054035] c3 1 SELinux: the above unknown classes and permissions will be denied
2289[ 3.093450] c2 1 audit: type=1403 audit(66875223.573:2): policy loaded auid=4294967295 ses=4294967295
2290[ 3.093634] c2 1 selinux: SELinux: Loaded policy from /sepolicy
2291[ 3.093634] c2 1
2292[ 3.093905] c2 1 audit: type=1404 audit(66875223.573:3): enforcing=1 old_enforcing=0 auid=4294967295 ses=4294967295
2293[ 3.095546] c3 1 selinux: SELinux: Loaded file_contexts
2294[ 3.095546] c3 1
2295[ 3.096250] c3 1 random: init urandom read with 100 bits of entropy available
2296[ 3.097036] c3 1 init: init second stage started!
2297[ 3.099790] c3 1 init: Using Android DT directory /proc/device-tree/firmware/android/
2298[ 3.101287] c3 1 selinux: SELinux: Loaded file_contexts
2299[ 3.101287] c3 1
2300[ 3.101561] c3 1 selinux: SELinux: Loaded property_contexts from /plat_property_contexts & /nonplat_property_contexts.
2301[ 3.101561] c3 1
2302[ 3.101579] c3 1 init: Running restorecon...
2303[ 3.103272] c3 1 selinux: SELinux: Could not stat /dev/block: No such file or directory.
2304[ 3.103272] c3 1
2305[ 3.103451] c3 1 init: waitid failed: No child processes
2306[ 3.103495] c3 1 init: Couldn't load property file: Unable to open '/system/etc/prop.default': No such file or directory: No such file or directory
2307[ 3.104208] c3 1 init: Couldn't load property file: Unable to open '/odm/default.prop': No such file or directory: No such file or directory
2308[ 3.104231] c3 1 init: Couldn't load property file: Unable to open '/vendor/default.prop': No such file or directory: No such file or directory
2309[ 3.104557] c3 1 init: Created socket '/dev/socket/property_service', mode 666, user 0, group 0
2310[ 3.104671] c3 1 init: Parsing file /init.rc...
2311[ 3.104713] c3 1 init: Added '/init.recovery.logd.rc' to import list
2312[ 3.104725] c3 1 init: Added '/init.recovery.usb.rc' to import list
2313[ 3.104737] c3 1 init: Added '/init.recovery.service.rc' to import list
2314[ 3.104748] c3 1 init: Added '/init.recovery.vold_decrypt.rc' to import list
2315[ 3.104764] c3 1 init: Added '/init.recovery.marlin.rc' to import list
2316[ 3.104844] c3 1 init: /init.rc: 13: invalid keyword 'setcon'
2317[ 3.104930] c3 1 init: /init.rc: 62: invalid keyword 'load_all_props'
2318[ 3.104974] c3 1 init: /init.rc: 100: invalid keyword 'powerctl'
2319[ 3.105033] c3 1 init: Parsing file /init.recovery.logd.rc...
2320[ 3.105055] c3 1 init: Unable to open '/init.recovery.logd.rc': No such file or directory
2321[ 3.105067] c3 1 init: /init.rc: 1: Could not import file '/init.recovery.logd.rc': No such file or directory
2322[ 3.105082] c3 1 init: Parsing file /init.recovery.usb.rc...
2323[ 3.105199] c3 1 init: Parsing file /init.recovery.service.rc...
2324[ 3.105242] c3 1 init: Parsing file /init.recovery.vold_decrypt.rc...
2325[ 3.105260] c3 1 init: Unable to open '/init.recovery.vold_decrypt.rc': No such file or directory
2326[ 3.105272] c3 1 init: /init.rc: 4: Could not import file '/init.recovery.vold_decrypt.rc': No such file or directory
2327[ 3.105286] c3 1 init: Parsing file /init.recovery.marlin.rc...
2328[ 3.105439] c3 1 init: Parsing file /system/etc/init...
2329[ 3.105459] c3 1 init: Unable to open '/system/etc/init': No such file or directory
2330[ 3.105476] c3 1 init: Parsing file /vendor/etc/init...
2331[ 3.105495] c3 1 init: Unable to open '/vendor/etc/init': No such file or directory
2332[ 3.105510] c3 1 init: Parsing file /odm/etc/init...
2333[ 3.105528] c3 1 init: Unable to open '/odm/etc/init': No such file or directory
2334[ 3.105573] c3 1 init: processing action (early-init) from (/init.rc:7)
2335[ 3.105647] c3 1 audit: type=1400 audit(66875223.583:4): avc: denied { setcheckreqprot } for pid=1 comm="init" scontext=u:r:init:s0 tcontext=u:object_r:kernel:s0 tclass=security permissive=0
2336[ 3.105663] c3 1 init: Unable to write to '/sys/fs/selinux/checkreqprot': Permission denied
2337[ 3.105769] c3 1 init: starting service 'ueventd'...
2338[ 3.106112] c3 1 audit: type=1400 audit(66875223.583:5): avc: denied { create } for pid=1 comm="init" name="cgroup.procs" scontext=u:r:init:s0 tcontext=u:object_r:rootfs:s0 tclass=file permissive=0
2339[ 3.106157] c3 1 init: Failed to write '432' to /acct/uid_0/pid_432/cgroup.procs: Permission denied
2340[ 3.106178] c3 1 init: createProcessGroup(0, 432) failed for service 'ueventd': Permission denied
2341[ 3.106236] c3 1 init: processing action (wait_for_coldboot_done) from (<Builtin Action>:0)
2342[ 3.108173] c0 432 ueventd: ueventd started!
2343[ 3.108249] c0 432 ueventd: Parsing file /ueventd.rc...
2344[ 3.108733] c0 432 ueventd: Parsing file /vendor/ueventd.rc...
2345[ 3.108764] c0 432 ueventd: Unable to open '/vendor/ueventd.rc': No such file or directory
2346[ 3.108786] c0 432 ueventd: Parsing file /odm/ueventd.rc...
2347[ 3.108810] c0 432 ueventd: Unable to open '/odm/ueventd.rc': No such file or directory
2348[ 3.108899] c0 432 ueventd: Parsing file /ueventd.marlin.rc...
2349[ 3.108924] c0 432 ueventd: Unable to open '/ueventd.marlin.rc': No such file or directory
2350[ 3.110531] c0 432 selinux: SELinux: Loaded file_contexts
2351[ 3.110531] c0 432
2352[ 3.217444] c0 433 ueventd: firmware: loading 'synaptics_bl71.img' for '/devices/soc/7577000.i2c/i2c-3/3-0020/firmware/synaptics_bl71.img'
2353[ 3.277948] c2 432 selinux: SELinux: Loaded file_contexts
2354[ 3.277948] c2 432
2355[ 3.331974] c2 432 ueventd: Coldboot took 0.221 seconds
2356[ 3.338423] c3 1 init: Command 'wait_for_coldboot_done' action=wait_for_coldboot_done (<Builtin Action>:0) returned 0 took 232ms.
2357[ 3.338457] c3 1 init: processing action (mix_hwrng_into_linux_rng) from (<Builtin Action>:0)
2358[ 3.338881] c3 1 init: Mixed 512 bytes from /dev/hw_random into /dev/urandom
2359[ 3.338908] c3 1 init: processing action (set_mmap_rnd_bits) from (<Builtin Action>:0)
2360[ 3.339340] c3 1 init: processing action (set_kptr_restrict) from (<Builtin Action>:0)
2361[ 3.339422] c3 1 init: processing action (keychord_init) from (<Builtin Action>:0)
2362[ 3.339442] c3 1 init: processing action (console_init) from (<Builtin Action>:0)
2363[ 3.339469] c3 1 init: processing action (init) from (/init.rc:24)
2364[ 3.340678] c3 1 audit: type=1400 audit(66875223.820:6): avc: denied { setattr } for pid=1 comm="init" name="system" dev="rootfs" ino=12329 scontext=u:r:init:s0 tcontext=u:object_r:rootfs:s0 tclass=lnk_file permissive=0
2365[ 3.341067] c3 1 init: processing action (init) from (/init.recovery.usb.rc:1)
2366[ 3.341203] c3 1 init: processing action (init) from (/init.recovery.marlin.rc:72)
2367[ 3.341253] c3 1 init: starting service 'hwservicemanager'...
2368[ 3.341728] c3 1 init: starting service 'prepdecrypt'...
2369[ 3.342082] c3 1 init: starting service 'boot-1-0'...
2370[ 3.342483] c3 1 init: processing action (mix_hwrng_into_linux_rng) from (<Builtin Action>:0)
2371[ 3.342935] c3 1 init: Mixed 512 bytes from /dev/hw_random into /dev/urandom
2372[ 3.342987] c3 1 init: processing action (late-init) from (/init.rc:76)
2373[ 3.343040] c3 1 init: processing action (queue_property_triggers) from (<Builtin Action>:0)
2374[ 3.343066] c3 1 init: processing action (fs) from (/init.rc:47)
2375[ 3.344444] c3 1 ffs_data_put(): freeing
2376[ 3.344491] c3 1 init: processing action (fs) from (/init.recovery.marlin.rc:1)
2377[ 3.344720] c3 1 init: do_start: Service pulldecryptfiles not found
2378[ 3.344736] c3 1 init: do_install_keyring called: No such file or directory
2379[ 3.344802] c3 1 init: Keyring created with id 117592367 in process 1
2380[ 3.344841] c3 1 init: processing action (load_system_props_action) from (/init.rc:65)
2381[ 3.344873] c3 1 init: Couldn't load property file: Unable to open '/system/build.prop': No such file or directory: No such file or directory
2382[ 3.344894] c3 1 init: Couldn't load property file: Unable to open '/odm/build.prop': No such file or directory: No such file or directory
2383[ 3.344917] c3 1 init: Couldn't load property file: Unable to open '/vendor/build.prop': No such file or directory: No such file or directory
2384[ 3.344936] c3 1 init: Couldn't load property file: Unable to open '/factory/factory.prop': No such file or directory: No such file or directory
2385[ 3.345749] c3 1 init: /recovery not specified in fstab
2386[ 3.345789] c3 1 init: processing action (load_persist_props_action) from (/init.rc:69)
2387[ 3.345818] c3 1 init: Couldn't load property file: Unable to open '/data/local.prop': No such file or directory: No such file or directory
2388[ 3.345839] c3 1 init: Unable to open persistent property directory "/data/property": No such file or directory
2389[ 3.345865] c3 1 init: processing action (firmware_mounts_complete) from (/init.rc:72)
2390[ 3.345908] c3 1 init: processing action (boot) from (/init.rc:53)
2391[ 3.346330] c3 1 init: starting service 'set_permissive'...
2392[ 3.346837] c3 1 init: starting service 'recovery'...
2393[ 3.347239] c3 1 init: starting service 'ldconfigtxt'...
2394[ 3.347695] c3 1 init: processing action (boot) from (/init.recovery.usb.rc:5)
2395[ 3.349683] c3 1 ffs_data_put(): freeing
2396[ 3.349773] c3 1 enable_store: android_usb: already disabled
2397[ 3.350094] c3 1 init: starting service 'adbd'...
2398[ 3.350627] c3 1 init: processing action (boot) from (/init.recovery.service.rc:1)
2399[ 3.350685] c3 1 init: processing action (enable_property_trigger) from (<Builtin Action>:0)
2400[ 3.350726] c3 1 init: processing action (ro.debuggable=1) from (/init.rc:112)
2401[ 3.350756] c3 1 init: processing action (service.adb.root=1) from (/init.rc:118)
2402[ 3.350823] c3 1 init: Sending signal 9 to service 'adbd' (pid 444) process group...
2403[ 3.350882] c3 1 init: kill(-444, 9) failed: No such process
2404[ 3.356862] c0 1 init: kill(-444, 9) failed: No such process
2405[ 3.362098] c0 1 init: kill(-444, 9) failed: No such process
2406[ 3.363881] c0 443 audit: type=1400 audit(66875223.843:7): avc: denied { write } for pid=443 comm="touch" name="sbin" dev="rootfs" ino=11926 scontext=u:r:recovery:s0 tcontext=u:object_r:rootfs:s0 tclass=dir permissive=1
2407[ 3.363907] c0 443 audit: type=1400 audit(66875223.843:8): avc: denied { add_name } for pid=443 comm="touch" name="ld.config.txt" scontext=u:r:recovery:s0 tcontext=u:object_r:rootfs:s0 tclass=dir permissive=1
2408[ 3.363937] c0 443 audit: type=1400 audit(66875223.843:9): avc: denied { create } for pid=443 comm="touch" name="ld.config.txt" scontext=u:r:recovery:s0 tcontext=u:object_r:rootfs:s0 tclass=file permissive=1
2409[ 3.364583] c2 445 audit: type=1400 audit(66875223.843:10): avc: denied { write } for pid=445 comm="ln" path="/sbin/getprop_0e98Sf" dev="rootfs" ino=14840 scontext=u:r:recovery:s0 tcontext=u:object_r:rootfs:s0 tclass=file permissive=1
2410[ 3.367516] c1 1 init: kill(-444, 9) failed: No such process
2411[ 3.367563] c1 1 init: Successfully killed process cgroup uid 0 pid 444 in 16ms
2412[ 3.367874] c1 1 init: Service 'ldconfigtxt' (pid 443) exited with status 0
2413[ 3.367970] c1 1 init: Service 'adbd' (pid 444) killed by signal 9
2414[ 3.371276] c1 1 init: Service 'set_permissive' (pid 441) exited with status 0
2415[ 3.373762] c1 1 selinux: avc: denied { set } for property=hwservicemanager.ready pid=438 uid=0 gid=0 scontext=u:r:recovery:s0 tcontext=u:object_r:hwservicemanager_prop:s0 tclass=property_service permissive=1
2416[ 3.373762] c1 1
2417[ 3.382810] c1 450 EXT4-fs (sda31): mounted filesystem without journal. Opts: (null)
2418[ 3.389008] c1 454 EXT4-fs (sda33): mounted filesystem with ordered data mode. Opts: (null)
2419[ 3.390080] c1 104 SMBCHG: smbchg_parallel_usb_en_work: AICL at 1700
2420[ 3.390116] c1 104 SMBCHG: smbchg_is_parallel_usb_ok: Not in fast charge, skipping
2421[ 3.390123] c1 104 SMBCHG: smbchg_relax: relaxing: 0x00 (bit 1)
2422[ 3.399660] c1 1 selinux: avc: denied { set } for property=twrp.crash_counter pid=442 uid=0 gid=0 scontext=u:r:recovery:s0 tcontext=u:object_r:default_prop:s0 tclass=property_service permissive=1
2423[ 3.399660] c1 1
2424[ 3.417494] c3 442 [TP]:synaptics_rmi4_fb_notifier_cb, event = 16 blank = 4
2425[ 3.417571] c3 442 [BATT] fb_notifier_callback-> display is Off
2426[ 3.417572] c3 442 [TP]:synaptics_rmi4_fb_notifier_cb, event = 16 blank = 0
2427[ 3.417913] c3 442 [BATT] fb_notifier_callback-> display is On
2428[ 3.417914] c0 433 ueventd: firmware: could not find firmware for synaptics_bl71.img
2429[ 3.418023] c0 433 ueventd: loading /devices/soc/7577000.i2c/i2c-3/3-0020/firmware/synaptics_bl71.img took 200ms
2430[ 3.418056] c1 283 [TP]: [ERR]:fwu_start_reflash: Firmware image synaptics_bl71.img not available
2431[ 3.418066] c1 283 [TP]:fwu_start_reflash: End of reflash process
2432[ 3.418075] c1 283 [TP]:synaptics_config_updater
2433[ 3.419096] c0 283 [TP]:synaptics_config_updater: Device config ID = 4d31763200180000000000000000000000000000000000000000000000000000
2434[ 3.419107] c0 283 [TP]:synaptics_config_updater: Start of write config process
2435[ 3.449513] c0 470 ufshcd 624000.ufshc: ufshcd_ioctl: User buffer is NULL!
2436[ 3.452167] c0 471 ufshcd 624000.ufshc: ufshcd_ioctl: User buffer is NULL!
2437[ 3.465055] c1 1 init: processing action (crypto.ready=1) from (/init.recovery.marlin.rc:80)
2438[ 3.465103] c1 1 init: starting service 'sbinqseecomd'...
2439[ 3.465741] c1 1 init: starting service 'servicemanager'...
2440[ 3.466333] c0 476 init: couldn't write 476 to /dev/cpuset/system-background/tasks: No such file or directory
2441[ 3.466460] c1 1 init: Service 'prepdecrypt' (pid 439) exited with status 0
2442[ 3.466598] c1 1 init: starting service 'gatekeeper-1-0'...
2443[ 3.467283] c1 1 init: starting service 'keymaster-3-0'...
2444[ 3.471415] c0 283 [TP]: fwu_get_tw_vendor_v7: tw_vendor = 0x2
2445[ 3.471435] c0 283 [TP]:synaptics_config_updater: Image config ID = 4d31763200180000000000000000000000000000000000000000000000000000
2446[ 3.471441] c0 283 [TP]:synaptics_config_updater: config_size = 2048
2447[ 3.471449] c0 283 [TP]: synaptics_config_updater: crc_cksum = 66A6880E
2448[ 3.473151] c0 283 [TP]: crc_comparison_v7: config_crc = 66A6880E, flash_crc = 66A6880E
2449[ 3.473163] c0 283 [TP]: synaptics_config_updater: No need to update
2450[ 3.473177] c0 283 [TP]:synaptics_rmi4_reset_device from synaptics_config_updater+0x128/0xd38, rebuild = 0
2451[ 3.487929] c3 475 capability: warning: `qseecomd' uses 32-bit capabilities (legacy support in use)
2452[ 3.492626] c1 1 selinux: avc: denied { set } for property=sys.listeners.registered pid=479 uid=1000 gid=1000 scontext=u:r:recovery:s0 tcontext=u:object_r:system_prop:s0 tclass=property_service permissive=1
2453[ 3.492626] c1 1
2454[ 3.501288] c3 283 [TP]:synaptics_rmi4_f12_init: Function 12 max x = 1439 max y = 2559 Rx: 17 Tx: 30
2455[ 3.501904] c3 283 [TP]synaptics_rmi4_f12_init:Wakeup Gesture range (0,0) -> (1439,2559)
2456[ 3.502146] c3 283 [TP]:synaptics_rmi4_f12_init report data init done
2457[ 3.509666] c3 283 [TP]:synaptics_rmi4_query_device: chip_id:3708, firmware_id:2433782
2458[ 3.510599] c3 283 [TP]:synaptics_rmi4_query_device: config_version: 4d31763200180000000000000000000000000000000000000000000000000000
2459[ 3.516158] c3 283 [TP]:synaptics_config_updater: End of write config process
2460[ 3.516169] c3 283 [TP]: synaptics_config_updater end
2461[ 3.530090] c2 442 EXT4-fs (sda35): warning: maximal mount count reached, running e2fsck is recommended
2462[ 3.531197] c2 442 EXT4-fs (sda35): mounted filesystem with ordered data mode. Opts:
2463[ 3.544511] c0 4 of_batterydata_get_best_profile: Find batterydata path: qcom,m1-id1-batterydata, id_ohm=33320, raw_min=0, raw_max=16000.
2464[ 3.544526] c0 4 of_batterydata_get_best_profile: Find batterydata path: qcom,m1-id2-batterydata, id_ohm=33320, raw_min=27501, raw_max=40000.
2465[ 3.544539] c0 4 FG: fg_batt_profile_init: batt_full_charge_criteria_ma = 345
2466[ 3.544544] c0 4 FG: fg_batt_profile_init: batt_fcc_ma = 3400
2467[ 3.544549] c0 4 FG: fg_batt_profile_init: batt_capacity_mah = 3450
2468[ 3.544554] c0 4 FG: fg_batt_profile_init: fcc_half_capacity_ma = 1600
2469[ 3.549030] c0 4 SMBCHG: battchg_suspend: 0 voting for 0 - on
2470[ 3.616310] c0 0 random: nonblocking pool is initialized
2471[ 3.643014] c1 461 get_ice_device_from_storage_type: found ice device 0000000000000000
2472[ 3.644164] c1 461 get_ice_device_from_storage_type: found ice device 0000000000000000
2473[ 3.659195] c2 1 selinux: avc: denied { set } for property=ro.crypto.state pid=442 uid=0 gid=0 scontext=u:r:recovery:s0 tcontext=u:object_r:vold_prop:s0 tclass=property_service permissive=1
2474[ 3.659195] c2 1
2475[ 3.659243] c2 1 init: property_set("ro.crypto.state", "encrypted") failed: property already set
2476[ 3.673623] c1 442 EXT4-fs (sda35): warning: maximal mount count reached, running e2fsck is recommended
2477[ 3.674819] c1 442 EXT4-fs (sda35): mounted filesystem with ordered data mode. Opts:
2478[ 3.893397] c1 104 SMBCHG: smbchg_parallel_usb_en_work: AICL at 1700
2479[ 3.893434] c1 104 SMBCHG: smbchg_is_parallel_usb_ok: Not in fast charge, skipping
2480[ 4.742081] c2 442 EXT4-fs (sda33): mounted filesystem with ordered data mode. Opts:
2481[ 4.748395] c2 442 EXT4-fs (sda31): mounted filesystem without journal. Opts:
2482[ 4.755120] c2 442 EXT4-fs (sda35): warning: maximal mount count reached, running e2fsck is recommended
2483[ 4.756161] c2 442 EXT4-fs (sda35): mounted filesystem with ordered data mode. Opts:
2484[ 5.553600] c0 4 of_batterydata_get_best_profile: Find batterydata path: qcom,m1-id1-batterydata, id_ohm=33320, raw_min=0, raw_max=16000.
2485[ 5.553614] c0 4 of_batterydata_get_best_profile: Find batterydata path: qcom,m1-id2-batterydata, id_ohm=33320, raw_min=27501, raw_max=40000.
2486[ 5.553628] c0 4 FG: fg_batt_profile_init: batt_full_charge_criteria_ma = 345
2487[ 5.553633] c0 4 FG: fg_batt_profile_init: batt_fcc_ma = 3400
2488[ 5.553638] c0 4 FG: fg_batt_profile_init: batt_capacity_mah = 3450
2489[ 5.553643] c0 4 FG: fg_batt_profile_init: fcc_half_capacity_ma = 1600
2490[ 5.558632] c0 4 SMBCHG: battchg_suspend: 0 voting for 0 - off
2491[ 5.565588] c0 4 FG: fg_batt_profile_init: Battery SOC: 84, V: 3946052uV
2492[ 5.565595] c0 4 [BATT] Probe process: (1, 3)
2493[ 5.565611] c0 4 [BATT] htc_battery_probe_process: catch name 2, set batt id=2, full_ma=345, fcc_ma=3400, capacity=3450, half_capacity_ma:1600, pd_is_limited:0, batt_eoc_current_ma:100
2494[ 5.565616] c0 4 [BATT] Probe process done.
2495[ 5.565770] c0 42 SMBCHG: battchg_suspend: 1 voting for 0 - off
2496[ 5.565839] c0 42 SMBCHG: smbchg_external_power_changed: usb type = 4, current_limit = 0, rc = 0
2497[ 5.565849] c0 42 SMBCHG: smbchg_stay_awake: staying awake: 0x02 (bit 2)
2498[ 5.565855] c0 42 SMBCHG: smbchg_vfloat_adjust_check: Starting vfloat adjustments
2499[ 5.566155] c0 312 SMBCHG: smbchg_relax: relaxing: 0x00 (bit 2)
2500[ 5.568460] c1 58 [BATT] read_batt_cycle_info: (read from devtree) g_batt_first_use_time = 0, g_overheat_55_sec = 0, g_total_level_raw = 0, g_batt_cycle_checksum = 0
2501[ 5.568471] c1 58 [BATT] read_batt_cycle_info: Checksum error: reset battery cycle data.
2502[ 5.568477] c1 58 [BATT] read_batt_cycle_info: g_batt_first_use_time = 66875226, g_overheat_55_sec = 0, g_total_level_raw = 0
2503[ 5.568485] c1 58 [BATT] calculate_batt_cycle_info: g_batt_first_use_time = 1972-02-14 00:27:06, g_overheat_55_sec = 0, g_total_level_raw = 0
2504[ 5.568490] c1 58 [BATT] calculate_batt_cycle_info: save batt cycle data every 50%
2505[ 5.568512] [BATT] batt_check_consistent: magic_num=0x0, level_raw=84, store_soc=0, current_time:66875226, store_time=0, batt_temp=317, store_temp=0, consistent_flag=0 at 5568503469 (1972-02-14 00:27:06.051606504 UTC)
2506[ 5.568521] c1 58 [BATT] pre_level=84,pre_raw_level=84,pre_five_digit=8,pre_chg_src=0
2507[ 5.568527] c1 58 [BATT] batt_level_adjust: Cable plug out, to store difference between UI & SOC. store_level:0, prev_level:84, raw_level:84
2508[ 5.568538] [BATT] write battery data: level:84, temp:317, time:66875226 at 5568529355 (1972-02-14 00:27:06.051635150 UTC)
2509[ 5.568546] c1 58 ignore the fist time on boot.
2510[ 5.568933] c1 104 SMBCHG: smbchg_cc_esr_wa_check: Not in fast charge, skipping
2511[ 5.568943] c1 104 SMBCHG: smbchg_external_power_changed: usb type = 4, current_limit = 0, rc = 0
2512[ 5.568949] c1 104 SMBCHG: smbchg_stay_awake: staying awake: 0x02 (bit 2)
2513[ 5.568954] c1 104 SMBCHG: smbchg_vfloat_adjust_check: Starting vfloat adjustments
2514[ 5.569088] c1 461 SMBCHG: smbchg_relax: relaxing: 0x00 (bit 2)
2515[ 5.585247] c1 58 [BATT][SMBCHG] 0x1010=00,0x1210=00,0x1242=00,0x1310=04,0x1340=10,0x1608=10,0x1610=00,cc=0uAh,warm_temp=470,cool_temp=100,pmic=rev1.1,sink_current=0,pd_chgr=0,wake_reason=0,smb_curr=12mA,batfet_wa=0
2516[ 5.585407] c1 58 [BATT][SMBCHG] CHG_STS[0B:0F]=[02,2e,9f,80,00],CHG_CFG[F0:F4]=[0f,04,1f,00,2e],CHG_CFG[F5:F9]=[1e,00,01,02,02],CHG_CFG[FA:FF]=[1c,47,42,08,00,08],BAT_CFG[F0:F5]=[0f,04,06,c5,00,03],BAT_CFG[F6:FB]=[03,3b,2a,04,c8,41]
2517[ 5.585416] [BATT][SMBCHG] USB_STS[07:0B]=[10,02,1a,08,08],USB_STS[0C:0F]=[00,08,0f,ff],USB_CFG[F0:F5]=[0f,02,07,04,11,ab],MISC_CFG[F0:F4]=[0f,00,12,04,25],MISC_CFG[F5:F9]=[38,18,91,e0,00],MISC_CFG[FA:FF]=[00,03,22,04,e0,02],SMB1351[00:06]=[02,1c,87,ef,08,11,6b,],[32]=[00]
2518[ 5.588036] [BATT] ID=2,level=84,level_raw=84,vol=3946mV,temp=317,current=846400uA,chg_name=NONE,chg_src=0,chg_en=0,health=0,overload=0,duration=0min,vbus=5076mV,max_iusb=0mA,chg_limit_reason=0,chg_stop_reason=0,consistent=-1,flag=0x00000000,AICL=1700mA,htc_ext=0x00,usb_temp=299,usb_overheat=0,level_accu=0 at 5588028107 (1972-02-14 00:27:06.071112860 UTC)
2519[ 5.588045] [BATT] Device is at booting stage at 5588036440 (1972-02-14 00:27:06.071143120 UTC)
2520[ 5.616799] [BATT] charger_exist_lock Lock
2521[ 5.616814] c0 312 at 5616800453 (1972-02-14 00:27:06.099894790 UTC)
2522[ 5.616848] [BATT] chg_full_check_worker: vol:3946, curr=846, is_full_count=0, is_full=0 at 5616840037 (1972-02-14 00:27:06.099944217 UTC)
2523[ 5.619314] [BATT] set_batt_psy_property. value(0) prop(89) at 5619306599 (1972-02-14 00:27:06.102409894 UTC)
2524[ 5.619410] c1 283 [BATT] calculate_batt_cycle_info: g_batt_first_use_time = 1972-02-14 00:27:06, g_overheat_55_sec = 0, g_total_level_raw = 0
2525[ 5.619416] c1 283 [BATT] calculate_batt_cycle_info: save batt cycle data every 50%
2526[ 5.619431] [BATT] set charging_current(500000) at 5619422485 (1972-02-14 00:27:06.102528436 UTC)
2527[ 5.619450] [BATT] ibat_max=3400000,ibat_new=3400000,prev_vol_limit=0,prev_ibat_health=1,chg_limit_reason=0,prev_screen_warm=0,prev_screen_hot=0,is_over_ibat=0,htc_batt_info.state=0x0 at 5619442016 (1972-02-14 00:27:06.102545988 UTC)
2528[ 5.619459] [BATT] set ibat max(3400000),ibat_total=3000000[3000000,0],ibat_total_new=3400000,is_parallel=0 at 5619450141 (1972-02-14 00:27:06.102555780 UTC)
2529[ 5.619466] [BATT] set_batt_psy_property. value(3400000) prop(32) at 5619457277 (1972-02-14 00:27:06.102563696 UTC)
2530[ 5.619474] c1 283 SMBCHG: smbchg_set_fastchg_current_user: User setting FCC to 3400
2531[ 5.619481] c1 283 SMBCHG: fcc: 1 voting for 3400 - on
2532[ 5.619487] c1 283 SMBCHG: smbchg_set_fastchg_current_raw: skipping fastchg current request: 3000
2533[ 5.619492] c1 283 SMBCHG: smbchg_stay_awake: staying awake: 0x01 (bit 1)
2534[ 5.619499] [BATT] set charging_enable(1) at 5619489933 (1972-02-14 00:27:06.102596457 UTC)
2535[ 5.619506] [BATT] set_batt_psy_property. value(1) prop(68) at 5619496912 (1972-02-14 00:27:06.102603592 UTC)
2536[ 5.619513] [BATT] set pwrsrc_enable(1) at 5619504099 (1972-02-14 00:27:06.102610780 UTC)
2537[ 5.619520] [BATT] set_batt_psy_property. value(1) prop(69) at 5619510662 (1972-02-14 00:27:06.102617342 UTC)
2538[ 5.619812] c1 104 SMBCHG: smbchg_external_power_changed: usb type = 4, current_limit = 500, rc = 0
2539[ 5.619819] c1 104 SMBCHG: usb_icl: 0 voting for 500 - on
2540[ 5.619825] c1 104 SMBCHG: smbchg_set_usb_current_max: USB current_ma = 500
2541[ 5.619830] c1 104 SMBCHG: usb_suspend: 2 voting for 0 - off
2542[ 5.619945] c0 384 SMBCHG: power_ok_handler: triggered: 0x01. prev_dischg_time_ms(0) dischg_time_ms(66875223213) diff(1844253523) count_same_dischg(0) limit_iusb(0)
2543[ 5.619953] c1 104 SMBCHG: smbchg_set_usb_current_max: usb type = 4 current set to 500 mA
2544[ 5.619970] c1 104 SMBCHG: smbchg_vfloat_adjust_check: Starting vfloat adjustments
2545[ 5.622159] c1 283 [BATT][SMBCHG] 0x1010=00,0x1210=00,0x1242=00,0x1310=04,0x1340=10,0x1608=10,0x1610=00,cc=0uAh,warm_temp=470,cool_temp=100,pmic=rev1.1,sink_current=0,pd_chgr=0,wake_reason=1,smb_curr=12mA,batfet_wa=0
2546[ 5.622319] c1 283 [BATT][SMBCHG] CHG_STS[0B:0F]=[02,2e,9f,89,00],CHG_CFG[F0:F4]=[0f,04,1f,00,2e],CHG_CFG[F5:F9]=[1e,00,01,02,02],CHG_CFG[FA:FF]=[1c,47,42,38,00,08],BAT_CFG[F0:F5]=[0f,04,06,c5,00,03],BAT_CFG[F6:FB]=[03,3b,2a,04,c8,41]
2547[ 5.622329] [BATT][SMBCHG] USB_STS[07:0B]=[10,02,22,08,08],USB_STS[0C:0F]=[00,08,0f,ff],USB_CFG[F0:F5]=[0f,02,07,04,11,ab],MISC_CFG[F0:F4]=[0f,00,12,04,25],MISC_CFG[F5:F9]=[38,18,91,e0,00],MISC_CFG[FA:FF]=[00,03,22,04,e0,02],SMB1351[00:06]=[02,1c,87,ef,08,11,6b,],[32]=[00]
2548[ 5.624886] [BATT] ID=2,level=84,level_raw=84,vol=3946mV,temp=317,current=846400uA,chg_name=USB,chg_src=1,chg_en=1,health=0,overload=0,duration=0min,vbus=5074mV,max_iusb=500mA,chg_limit_reason=0,chg_stop_reason=0,consistent=-1,flag=0x00000000,AICL=1700mA,htc_ext=0x00,usb_temp=294,usb_overheat=0,level_accu=0 at 5624879048 (1972-02-14 00:27:06.107963957 UTC)
2549[ 5.624896] [BATT] Device is at booting stage at 5624887485 (1972-02-14 00:27:06.107994322 UTC)
2550[ 5.672760] c1 58 [BATT] calculate_batt_cycle_info: g_batt_first_use_time = 1972-02-14 00:27:06, g_overheat_55_sec = 0, g_total_level_raw = 0
2551[ 5.672771] c1 58 [BATT] calculate_batt_cycle_info: save batt cycle data every 50%
2552[ 5.672788] c1 58 SMBCHG: pmi8994_set_float_voltage_comp: set vfloat comp = 0
2553[ 5.672843] [BATT] ibat_max=3400000,ibat_new=3400000,prev_vol_limit=0,prev_ibat_health=1,chg_limit_reason=0,prev_screen_warm=0,prev_screen_hot=0,is_over_ibat=0,htc_batt_info.state=0x0 at 5672834834 (1972-02-14 00:27:06.155937660 UTC)
2554[ 5.672853] [BATT] set ibat max(3400000),ibat_total=3000000[3000000,0],ibat_total_new=3400000,is_parallel=0 at 5672844313 (1972-02-14 00:27:06.155949379 UTC)
2555[ 5.672861] [BATT] set_batt_psy_property. value(3400000) prop(32) at 5672851969 (1972-02-14 00:27:06.155958025 UTC)
2556[ 5.672869] c1 58 SMBCHG: smbchg_set_fastchg_current_user: User setting FCC to 3400
2557[ 5.675487] c1 58 [BATT][SMBCHG] 0x1010=00,0x1210=00,0x1242=00,0x1310=04,0x1340=02,0x1608=10,0x1610=01,cc=0uAh,warm_temp=470,cool_temp=100,pmic=rev1.1,sink_current=0,pd_chgr=0,wake_reason=1,smb_curr=12mA,batfet_wa=0
2558[ 5.675641] c1 58 [BATT][SMBCHG] CHG_STS[0B:0F]=[02,6e,9f,83,00],CHG_CFG[F0:F4]=[0f,04,1f,00,2e],CHG_CFG[F5:F9]=[00,00,01,02,02],CHG_CFG[FA:FF]=[1c,47,42,38,00,08],BAT_CFG[F0:F5]=[0f,04,06,c5,00,03],BAT_CFG[F6:FB]=[03,3b,2a,04,c8,41]
2559[ 5.675650] [BATT][SMBCHG] USB_STS[07:0B]=[10,02,22,08,08],USB_STS[0C:0F]=[00,08,0f,ff],USB_CFG[F0:F5]=[0f,02,07,04,11,ab],MISC_CFG[F0:F4]=[0f,00,12,04,25],MISC_CFG[F5:F9]=[38,18,91,e0,00],MISC_CFG[FA:FF]=[00,03,22,04,e0,02],SMB1351[00:06]=[02,1c,87,ef,08,11,6b,],[32]=[00]
2560[ 5.678199] [BATT] ID=2,level=84,level_raw=84,vol=3946mV,temp=317,current=846400uA,chg_name=USB,chg_src=1,chg_en=1,health=1,overload=0,duration=0min,vbus=4876mV,max_iusb=500mA,chg_limit_reason=0,chg_stop_reason=0,consistent=-1,flag=0x00000000,AICL=1700mA,htc_ext=0x00,usb_temp=295,usb_overheat=0,level_accu=0 at 5678192282 (1972-02-14 00:27:06.161277817 UTC)
2561[ 5.678210] [BATT] Device is at booting stage at 5678200824 (1972-02-14 00:27:06.161307556 UTC)
2562[ 5.724451] c0 369 SMBCHG: fastchg_handler: p2f triggered
2563[ 5.724477] c0 369 SMBCHG: smbchg_vfloat_adjust_check: Starting vfloat adjustments
2564[ 5.726509] c2 442 EXT4-fs (sda35): warning: maximal mount count reached, running e2fsck is recommended
2565[ 5.727589] c2 442 EXT4-fs (sda35): mounted filesystem with ordered data mode. Opts:
2566[ 5.749981] c2 442 EXT4-fs (sda33): mounted filesystem with ordered data mode. Opts:
2567[ 5.756206] c3 442 EXT4-fs (sda31): mounted filesystem without journal. Opts:
2568[ 6.016731] c1 58 dwc3 dwc3_msm_notify_attached_source: id_state = 1
2569[ 6.017056] c1 58 SMBCHG: smbchg_battery_set_property: Received resistor change 1 -> 1, original sink_current: 0
2570[ 6.017064] c1 58 SMBCHG: smbchg_battery_set_property: Set original resistor as (0)
2571[ 6.017070] c1 58 [BATT][PD] Not support
2572[ 6.123393] c1 104 SMBCHG: smbchg_parallel_usb_en_work: AICL at 1700
2573[ 6.123430] c1 104 SMBCHG: smbchg_is_parallel_usb_ok: SDP adapter, skipping
2574[ 6.123435] c1 104 SMBCHG: smbchg_relax: relaxing: 0x00 (bit 1)
2575[ 6.260052] c2 283 dwc3 dwc3_msm_notify_attached_source: id_state = 1
2576[ 6.522992] c2 442 audit_printk_skb: 978 callbacks suppressed
2577[ 6.523003] c2 442 audit: type=1400 audit(66875227.000:337): avc: denied { create } for pid=442 comm="recovery" scontext=u:r:recovery:s0 tcontext=u:r:recovery:s0 tclass=netlink_kobject_uevent_socket permissive=1
2578[ 6.523035] c2 442 audit: type=1400 audit(66875227.000:338): avc: denied { bind } for pid=442 comm="recovery" scontext=u:r:recovery:s0 tcontext=u:r:recovery:s0 tclass=netlink_kobject_uevent_socket permissive=1
2579[ 6.626724] c1 104 SMBCHG: smbchg_parallel_usb_en_work: AICL at 1700
2580[ 6.626762] c1 104 SMBCHG: smbchg_is_parallel_usb_ok: SDP adapter, skipping
2581[ 6.844663] c2 442 audit: type=1400 audit(66875227.323:339): avc: denied { read } for pid=442 comm="recovery" name="0" dev="sda35" ino=589829 scontext=u:r:recovery:s0 tcontext=u:object_r:media_rw_data_file:s0 tclass=dir permissive=1
2582[ 6.844689] c2 442 audit: type=1400 audit(66875227.323:340): avc: denied { open } for pid=442 comm="recovery" path="/sdcard" dev="sda35" ino=589829 scontext=u:r:recovery:s0 tcontext=u:object_r:media_rw_data_file:s0 tclass=dir permissive=1
2583[ 6.846925] c2 442 audit: type=1400 audit(66875227.326:341): avc: denied { getattr } for pid=442 comm="recovery" path="/sdcard/Music" dev="sda35" ino=589830 scontext=u:r:recovery:s0 tcontext=u:object_r:media_rw_data_file:s0:c512,c768 tclass=dir permissive=1
2584[ 6.847369] c2 442 audit: type=1400 audit(66875227.326:342): avc: denied { getattr } for pid=442 comm="recovery" path="/sdcard/hybris-boot.img" dev="sda35" ino=589846 scontext=u:r:recovery:s0 tcontext=u:object_r:media_rw_data_file:s0 tclass=file permissive=1
2585[ 6.910102] c2 283 dwc3 dwc3_msm_notify_attached_source: id_state = 1
2586[ 6.910735] c2 283 SMBCHG: smbchg_battery_set_property: Received resistor change 1 -> 1, original sink_current: 1
2587[ 6.910745] c2 283 SMBCHG: smbchg_battery_set_property: Resistor no change, skip
2588[ 6.910750] c2 283 [BATT][PD] Not support
2589[ 7.154501] c3 281 dwc3 dwc3_msm_notify_attached_source: id_state = 1
2590[ 7.353588] c2 442 audit: type=1400 audit(66875227.833:343): avc: denied { getattr } for pid=442 comm="recovery" path="/sepolicy" dev="rootfs" ino=12326 scontext=u:r:recovery:s0 tcontext=u:object_r:sepolicy_file:s0 tclass=file permissive=1
2591[ 7.353691] c2 442 audit: type=1400 audit(66875227.833:344): avc: denied { getattr } for pid=442 comm="recovery" path="/nonplat_service_contexts" dev="rootfs" ino=11911 scontext=u:r:recovery:s0 tcontext=u:object_r:nonplat_service_contexts_file:s0 tclass=file permissive=1
2592[ 7.500399] c0 442 audit: type=1400 audit(66875227.980:345): avc: denied { open } for pid=442 comm="recovery" path="/dev/__properties__/u:object_r:wc_prop:s0" dev="tmpfs" ino=15774 scontext=u:r:recovery:s0 tcontext=u:object_r:wc_prop:s0 tclass=file permissive=1
2593[ 7.500430] c0 442 audit: type=1400 audit(66875227.980:346): avc: denied { getattr } for pid=442 comm="recovery" path="/dev/__properties__/u:object_r:wc_prop:s0" dev="tmpfs" ino=15774 scontext=u:r:recovery:s0 tcontext=u:object_r:wc_prop:s0 tclass=file permissive=1
2594[ 7.549734] c2 297 get_ice_device_from_storage_type: found ice device 0000000000000000
2595[ 7.550749] c2 297 get_ice_device_from_storage_type: found ice device 0000000000000000
2596[ 7.553627] c3 1 selinux: avc: denied { set } for property=sys.usb.config pid=442 uid=0 gid=0 scontext=u:r:recovery:s0 tcontext=u:object_r:system_radio_prop:s0 tclass=property_service permissive=1
2597[ 7.553627] c3 1
2598[ 7.553836] c3 1 init: processing action (sys.usb.config=none) from (/init.recovery.usb.rc:36)
2599[ 7.556379] c3 1 init: processing action (sys.usb.config=mtp,adb) from (/init.recovery.usb.rc:52)
2600[ 7.556653] c3 1 init: starting service 'adbd'...
2601[ 7.557161] c3 1 init: property_set("ro.boottime.adbd", "7556905646") failed: property already set
2602[ 7.557907] c0 533 init: Created socket '/dev/socket/adbd', mode 660, user 1000, group 1000
2603[ 7.563102] c3 442 EXT4-fs (sda33): mounted filesystem with ordered data mode. Opts:
2604[ 7.563194] c2 534 read descriptors
2605[ 7.563205] c2 534 read strings
2606[ 7.563220] c2 534 mtp_bind_config
2607[ 7.803383] c3 283 dwc3 dwc3_msm_notify_attached_source: id_state = 1
2608[ 7.804006] c3 283 SMBCHG: smbchg_battery_set_property: Received resistor change 1 -> 1, original sink_current: 1
2609[ 7.804011] c3 283 SMBCHG: smbchg_battery_set_property: Set original resistor as (1)
2610[ 7.804017] c3 283 [BATT][PD] Not support
2611[ 7.848627] c0 0 dwc3 dwc3_gadget_conndone_interrupt: usb conn speed = 3
2612[ 7.917235] android_work: [USB] android_work: sw_suspended 0, suspended 0 config 0,connect2pc 0
2613[ 7.917241] c0 4 android_work: [USB] android_work: sw_connected 0, connected 1 last_uevent 0
2614[ 7.917541] c0 4 android_work: android_work: sent uevent USB_STATE=CONNECTED
2615[ 7.917551] c0 4 android_work: [USB] android_work: set usb_connect2pc = 1
2616[ 7.920827] android_work: [USB] android_work: sw_suspended 0, suspended 0 config 0,connect2pc 1
2617[ 7.920833] c0 4 android_work: [USB] android_work: sw_connected 1, connected 0 last_uevent 1
2618[ 7.921034] c0 4 android_work: android_work: sent uevent USB_STATE=DISCONNECTED
2619[ 7.921042] c0 4 android_work: [USB] android_work: set usb_connect2pc = 0
2620[ 7.921047] c0 4 android_work: android_work: OS_NOT_YET
2621[ 7.972018] c0 0 dwc3 dwc3_gadget_conndone_interrupt: usb conn speed = 3
2622[ 8.057268] android_work: [USB] android_work: sw_suspended 0, suspended 0 config 0,connect2pc 0
2623[ 8.057314] c0 4 android_work: [USB] android_work: sw_connected 0, connected 1 last_uevent 0
2624[ 8.057491] c0 4 android_work: android_work: sent uevent USB_STATE=CONNECTED
2625[ 8.057514] c0 4 android_work: [USB] android_work: set usb_connect2pc = 1
2626[ 8.059597] c0 0 android_usb gadget: high-speed config #1: 66bf0c8.android_usb
2627[ 8.059670] c0 0 msm-dwc3 6a00000.ssusb: Avail curr from USB = 500
2628[ 8.059826] c0 4 SMBCHG: smbchg_external_power_changed: usb type = 4, current_limit = 500, rc = 0
2629[ 8.059872] c0 4 SMBCHG: smbchg_stay_awake: staying awake: 0x02 (bit 2)
2630[ 8.059878] c0 4 SMBCHG: smbchg_vfloat_adjust_check: Starting vfloat adjustments
2631[ 8.059947] android_work: [USB] android_work: sw_suspended 0, suspended 0 config 1,connect2pc 1
2632[ 8.059952] c0 4 android_work: [USB] android_work: sw_connected 1, connected 1 last_uevent 1
2633[ 8.060135] c0 42 SMBCHG: smbchg_relax: relaxing: 0x00 (bit 2)
2634[ 8.110068] c0 4 android_work: android_work: sent uevent USB_STATE=CONFIGURED
2635[ 8.356163] c0 532 mtp_open
2636[ 14.480054] c3 30 SMBCHG: smbchg_sink_current_change_worker: skip change, chg_type: 4, sink_curr: 1
2637[ 14.693381] [BATT] set charging_current(500000), PC connected at 14693376461 (2019-04-11 04:18:35.669735513 UTC)
2638[ 14.693437] c1 461 SMBCHG: smbchg_external_power_changed: usb type = 4, current_limit = 500, rc = 0
2639[ 14.693445] c1 461 SMBCHG: smbchg_stay_awake: staying awake: 0x02 (bit 2)
2640[ 14.693452] c1 461 SMBCHG: smbchg_vfloat_adjust_check: Starting vfloat adjustments
2641[ 14.693864] c1 104 SMBCHG: smbchg_relax: relaxing: 0x00 (bit 2)
2642[ 25.653376] [BATT] chg_full_check_worker: vol:3946, curr=846, is_full_count=0, is_full=0 at 25653374948 (2019-04-11 04:18:46.629729521 UTC)
2643[ 33.653384] c0 4 FG: fg_is_batt_id_valid: fg batt sts 0x2c
2644[ 45.706714] [BATT] chg_full_check_worker: vol:4199, curr=-204, is_full_count=0, is_full=0 at 45706715331 (2019-04-11 04:19:06.683070998 UTC)
2645[ 63.733385] c0 4 FG: fg_is_batt_id_valid: fg batt sts 0x2c
2646[ 65.760264] [BATT] chg_full_check_worker: vol:4196, curr=-188, is_full_count=0, is_full=0 at 65760265975 (2019-04-11 04:19:26.736624454 UTC)
2647[ 65.764967] c2 280 [BATT] calculate_batt_cycle_info: g_batt_first_use_time modify!
2648[ 65.764976] c2 280 [BATT] calculate_batt_cycle_info: g_batt_first_use_time = 2019-04-11 04:19:26, g_overheat_55_sec = 0, g_total_level_raw = 0
2649[ 65.764980] c2 280 [BATT] calculate_batt_cycle_info: save batt cycle data every 50%
2650[ 65.764995] [BATT] ibat_max=3400000,ibat_new=3400000,prev_vol_limit=0,prev_ibat_health=1,chg_limit_reason=0,prev_screen_warm=0,prev_screen_hot=0,is_over_ibat=0,htc_batt_info.state=0x0 at 65764992330 (2019-04-11 04:19:26.741358621 UTC)
2651[ 65.765003] [BATT] set ibat max(3400000),ibat_total=3000000[3000000,0],ibat_total_new=3400000,is_parallel=0 at 65764999569 (2019-04-11 04:19:26.741367996 UTC)
2652[ 65.765009] [BATT] set_batt_psy_property. value(3400000) prop(32) at 65765005350 (2019-04-11 04:19:26.741374611 UTC)
2653[ 65.765015] c2 280 SMBCHG: smbchg_set_fastchg_current_user: User setting FCC to 3400
2654[ 65.767560] c2 280 [BATT][SMBCHG] 0x1010=10,0x1210=00,0x1242=00,0x1310=04,0x1340=02,0x1608=10,0x1610=01,cc=2783649uAh,warm_temp=470,cool_temp=100,pmic=rev1.1,sink_current=1,pd_chgr=0,wake_reason=0,smb_curr=12mA,batfet_wa=0
2655[ 65.767710] c2 280 [BATT][SMBCHG] CHG_STS[0B:0F]=[02,6e,9f,85,00],CHG_CFG[F0:F4]=[0f,04,1f,00,2e],CHG_CFG[F5:F9]=[00,00,01,02,02],CHG_CFG[FA:FF]=[1c,47,42,38,00,08],BAT_CFG[F0:F5]=[0f,04,06,c5,00,03],BAT_CFG[F6:FB]=[03,3b,2a,04,c8,41]
2656[ 65.767717] [BATT][SMBCHG] USB_STS[07:0B]=[10,02,22,08,08],USB_STS[0C:0F]=[00,08,0f,ff],USB_CFG[F0:F5]=[0f,02,07,04,11,ab],MISC_CFG[F0:F4]=[0f,00,12,04,25],MISC_CFG[F5:F9]=[38,18,91,e0,00],MISC_CFG[FA:FF]=[00,03,22,04,e0,02],SMB1351[00:06]=[02,1c,87,ef,08,11,6b,],[32]=[00]
2657[ 65.770578] [BATT] ID=2,level=84,level_raw=84,vol=4196mV,temp=315,current=-188292uA,chg_name=USB,chg_src=1,chg_en=1,health=1,overload=0,duration=0min,vbus=4878mV,max_iusb=500mA,chg_limit_reason=0,chg_stop_reason=0,consistent=-1,flag=0x00000000,AICL=1700mA,htc_ext=0x00,usb_temp=297,usb_overheat=0,level_accu=0 at 65770575507 (2019-04-11 04:19:26.746926799 UTC)
2658[ 65.770585] [BATT] Device is at booting stage at 65770581757 (2019-04-11 04:19:26.746951591 UTC)
2659[ 66.731495] c3 442 SMBCHG: pmi8996_charger_batfet_switch: Batfet WA 0->1, chgr_RT_STS=0x10, batif_RT_STS=0x0
2660[ 66.731549] c3 442 mdss_fb_set_bl_brightness: bl_dim_status =1
2661[ 68.737363] c3 442 SMBCHG: pmi8996_charger_batfet_switch: Batfet WA 1->0, chgr_RT_STS=0x10, batif_RT_STS=0x0
2662[ 68.737416] c3 442 mdss_fb_set_bl_brightness: bl_dim_status =0
2663[ 68.740680] c3 442 [TP]:synaptics_rmi4_fb_notifier_cb, event = 16 blank = 4
2664[ 68.952708] c3 442 [BATT] fb_notifier_callback-> display is Off
2665[ 68.956647] c3 283 [BATT] calculate_batt_cycle_info: g_batt_first_use_time = 2019-04-11 04:19:26, g_overheat_55_sec = 0, g_total_level_raw = 0
2666[ 68.956652] c3 283 [BATT] calculate_batt_cycle_info: save batt cycle data every 50%
2667[ 68.956667] [BATT] ibat_max=3400000,ibat_new=3400000,prev_vol_limit=0,prev_ibat_health=1,chg_limit_reason=0,prev_screen_warm=0,prev_screen_hot=0,is_over_ibat=0,htc_batt_info.state=0x1 at 68956685043 (2019-04-11 04:19:29.933030710 UTC)
2668[ 68.956696] [BATT] set ibat max(3400000),ibat_total=3000000[3000000,0],ibat_total_new=3400000,is_parallel=0 at 68956692491 (2019-04-11 04:19:29.933060971 UTC)
2669[ 68.956702] [BATT] set_batt_psy_property. value(3400000) prop(32) at 68956698429 (2019-04-11 04:19:29.933067846 UTC)
2670[ 68.956709] c3 283 SMBCHG: smbchg_set_fastchg_current_user: User setting FCC to 3400
2671[ 68.959267] c3 283 [BATT][SMBCHG] 0x1010=10,0x1210=00,0x1242=00,0x1310=04,0x1340=02,0x1608=10,0x1610=01,cc=2783649uAh,warm_temp=470,cool_temp=100,pmic=rev1.1,sink_current=1,pd_chgr=0,wake_reason=0,smb_curr=12mA,batfet_wa=0
2672[ 68.959418] c3 283 [BATT][SMBCHG] CHG_STS[0B:0F]=[02,6e,9f,05,00],CHG_CFG[F0:F4]=[0f,04,1f,00,2e],CHG_CFG[F5:F9]=[00,00,01,02,02],CHG_CFG[FA:FF]=[1c,47,42,38,00,08],BAT_CFG[F0:F5]=[0f,04,06,c5,00,03],BAT_CFG[F6:FB]=[03,3b,2a,04,c8,41]
2673[ 68.959424] [BATT][SMBCHG] USB_STS[07:0B]=[10,02,22,08,08],USB_STS[0C:0F]=[00,08,0f,ff],USB_CFG[F0:F5]=[0f,02,07,04,11,ab],MISC_CFG[F0:F4]=[0f,00,12,04,25],MISC_CFG[F5:F9]=[38,18,91,e0,00],MISC_CFG[FA:FF]=[00,03,22,04,e0,02],SMB1351[00:06]=[02,1c,87,ef,08,11,6b,],[32]=[00]
2674[ 68.962005] [BATT] ID=2,level=84,level_raw=84,vol=4196mV,temp=315,current=-188292uA,chg_name=USB,chg_src=1,chg_en=1,health=1,overload=0,duration=0min,vbus=4880mV,max_iusb=500mA,chg_limit_reason=0,chg_stop_reason=0,consistent=-1,flag=0x00000000,AICL=1700mA,htc_ext=0x00,usb_temp=297,usb_overheat=0,level_accu=0 at 68962003117 (2019-04-11 04:19:29.938354877 UTC)
2675[ 68.962012] [BATT] Device is at booting stage at 68962009106 (2019-04-11 04:19:29.938378836 UTC)
2676[ 69.283672] c0 0 FG: fg_vbatt_low_handler: vbatt-low triggered
2677[ 69.283695] c0 0 FG: fg_vbatt_low_handler: disabling vbatt_low irq
2678[ 69.283755] c0 4 SMBCHG: smbchg_external_power_changed: usb type = 4, current_limit = 500, rc = 0
2679[ 69.283763] c0 4 SMBCHG: smbchg_stay_awake: staying awake: 0x02 (bit 2)
2680[ 69.283769] c0 4 SMBCHG: smbchg_vfloat_adjust_check: Starting vfloat adjustments
2681[ 69.283964] c0 42 SMBCHG: smbchg_relax: relaxing: 0x00 (bit 2)
2682[ 85.813365] [BATT] chg_full_check_worker: vol:4196, curr=-188, is_full_count=0, is_full=0 at 85813369691 (2019-04-11 04:19:46.789724369 UTC)
2683[ 93.813372] c0 312 FG: fg_is_batt_id_valid: fg batt sts 0x28
2684[ 105.866700] [BATT] chg_full_check_worker: vol:4222, curr=-274, is_full_count=0, is_full=0 at 105866707835 (2019-04-11 04:20:06.843061835 UTC)
2685[ 123.893375] c0 4 FG: fg_is_batt_id_valid: fg batt sts 0x28
2686[ 125.920248] [BATT] chg_full_check_worker: vol:4224, curr=-273, is_full_count=0, is_full=0 at 125920256812 (2019-04-11 04:20:26.896614562 UTC)
2687[ 129.122505] c2 280 [BATT] calculate_batt_cycle_info: g_batt_first_use_time = 2019-04-11 04:19:26, g_overheat_55_sec = 0, g_total_level_raw = 0
2688[ 129.122511] c2 280 [BATT] calculate_batt_cycle_info: save batt cycle data every 50%
2689[ 129.122524] [BATT] ibat_max=3400000,ibat_new=3400000,prev_vol_limit=0,prev_ibat_health=1,chg_limit_reason=0,prev_screen_warm=0,prev_screen_hot=0,is_over_ibat=0,htc_batt_info.state=0x1 at 129122527131 (2019-04-11 04:20:30.098893891 UTC)
2690[ 129.122532] [BATT] set ibat max(3400000),ibat_total=3000000[3000000,0],ibat_total_new=3400000,is_parallel=0 at 129122534318 (2019-04-11 04:20:30.098902850 UTC)
2691[ 129.122538] [BATT] set_batt_psy_property. value(3400000) prop(32) at 129122540308 (2019-04-11 04:20:30.098909725 UTC)
2692[ 129.122544] c2 280 SMBCHG: smbchg_set_fastchg_current_user: User setting FCC to 3400
2693[ 129.125082] c2 280 [BATT][SMBCHG] 0x1010=10,0x1210=00,0x1242=00,0x1310=04,0x1340=02,0x1608=10,0x1610=01,cc=2789512uAh,warm_temp=470,cool_temp=100,pmic=rev1.1,sink_current=1,pd_chgr=0,wake_reason=0,smb_curr=12mA,batfet_wa=0
2694[ 129.125232] c2 280 [BATT][SMBCHG] CHG_STS[0B:0F]=[02,6e,9f,05,00],CHG_CFG[F0:F4]=[0f,04,1f,00,2e],CHG_CFG[F5:F9]=[00,00,01,02,02],CHG_CFG[FA:FF]=[1c,47,42,38,00,08],BAT_CFG[F0:F5]=[0f,04,06,c5,00,03],BAT_CFG[F6:FB]=[03,3b,2a,04,c8,41]
2695[ 129.125238] [BATT][SMBCHG] USB_STS[07:0B]=[10,02,22,08,08],USB_STS[0C:0F]=[00,08,0f,ff],USB_CFG[F0:F5]=[0f,02,07,04,11,ab],MISC_CFG[F0:F4]=[0f,00,12,04,25],MISC_CFG[F5:F9]=[38,18,91,e0,00],MISC_CFG[FA:FF]=[00,03,22,04,e0,02],SMB1351[00:06]=[02,1c,87,ef,08,11,6b,],[32]=[00]
2696[ 129.128116] [BATT] ID=2,level=84,level_raw=84,vol=4224mV,temp=315,current=-273588uA,chg_name=USB,chg_src=1,chg_en=1,health=1,overload=0,duration=0min,vbus=4880mV,max_iusb=500mA,chg_limit_reason=0,chg_stop_reason=0,consistent=-1,flag=0x00000000,AICL=1700mA,htc_ext=0x00,usb_temp=294,usb_overheat=0,level_accu=0 at 129128119058 (2019-04-11 04:20:30.104471288 UTC)
2697[ 145.973356] [BATT] chg_full_check_worker: vol:4224, curr=-273, is_full_count=0, is_full=0 at 145973365320 (2019-04-11 04:20:46.949723330 UTC)
2698[ 153.973365] c0 4 FG: fg_is_batt_id_valid: fg batt sts 0x28
2699[ 166.026689] [BATT] chg_full_check_worker: vol:4226, curr=-275, is_full_count=0, is_full=0 at 166026700599 (2019-04-11 04:21:07.003057984 UTC)
2700[ 184.053349] c0 312 FG: fg_is_batt_id_valid: fg batt sts 0x28
2701[ 186.080214] [BATT] chg_full_check_worker: vol:4227, curr=-275, is_full_count=0, is_full=0 at 186080227701 (2019-04-11 04:21:27.056587586 UTC)
2702[ 189.282583] c3 283 [BATT] calculate_batt_cycle_info: g_batt_first_use_time = 2019-04-11 04:19:26, g_overheat_55_sec = 0, g_total_level_raw = 0
2703[ 189.282590] c3 283 [BATT] calculate_batt_cycle_info: save batt cycle data every 50%
2704[ 189.282602] [BATT] ibat_max=3400000,ibat_new=3400000,prev_vol_limit=0,prev_ibat_health=1,chg_limit_reason=0,prev_screen_warm=0,prev_screen_hot=0,is_over_ibat=0,htc_batt_info.state=0x1 at 189282611093 (2019-04-11 04:21:30.258978478 UTC)
2705[ 189.282610] [BATT] set ibat max(3400000),ibat_total=3000000[3000000,0],ibat_total_new=3400000,is_parallel=0 at 189282618124 (2019-04-11 04:21:30.258986707 UTC)
2706[ 189.282616] [BATT] set_batt_psy_property. value(3400000) prop(32) at 189282623957 (2019-04-11 04:21:30.258993374 UTC)
2707[ 189.282622] c3 283 SMBCHG: smbchg_set_fastchg_current_user: User setting FCC to 3400
2708[ 189.285158] c3 283 [BATT][SMBCHG] 0x1010=10,0x1210=00,0x1242=00,0x1310=04,0x1340=02,0x1608=10,0x1610=01,cc=2795518uAh,warm_temp=470,cool_temp=100,pmic=rev1.1,sink_current=1,pd_chgr=0,wake_reason=0,smb_curr=12mA,batfet_wa=0
2709[ 189.285310] c3 283 [BATT][SMBCHG] CHG_STS[0B:0F]=[02,6e,9f,05,00],CHG_CFG[F0:F4]=[0f,04,1f,00,2e],CHG_CFG[F5:F9]=[00,00,01,02,02],CHG_CFG[FA:FF]=[1c,47,42,38,00,08],BAT_CFG[F0:F5]=[0f,04,06,c5,00,03],BAT_CFG[F6:FB]=[03,3b,2a,04,c8,41]
2710[ 189.285318] [BATT][SMBCHG] USB_STS[07:0B]=[10,02,22,08,08],USB_STS[0C:0F]=[00,08,0f,ff],USB_CFG[F0:F5]=[0f,02,07,04,11,ab],MISC_CFG[F0:F4]=[0f,00,12,04,25],MISC_CFG[F5:F9]=[38,18,91,e0,00],MISC_CFG[FA:FF]=[00,03,22,04,e0,02],SMB1351[00:06]=[02,1c,87,ef,08,11,6b,],[32]=[00]
2711[ 189.288170] [BATT] ID=2,level=84,level_raw=84,vol=4227mV,temp=312,current=-275724uA,chg_name=USB,chg_src=1,chg_en=1,health=1,overload=0,duration=0min,vbus=4878mV,max_iusb=500mA,chg_limit_reason=0,chg_stop_reason=0,consistent=-1,flag=0x00000000,AICL=1700mA,htc_ext=0x00,usb_temp=293,usb_overheat=0,level_accu=0 at 189288179062 (2019-04-11 04:21:30.264531135 UTC)
2712[ 206.133346] [BATT] chg_full_check_worker: vol:4227, curr=-275, is_full_count=0, is_full=0 at 206133361313 (2019-04-11 04:21:47.109719011 UTC)
2713[ 214.133354] c0 312 FG: fg_is_batt_id_valid: fg batt sts 0x28
2714[ 226.186676] [BATT] chg_full_check_worker: vol:4228, curr=-275, is_full_count=0, is_full=0 at 226186693571 (2019-04-11 04:22:07.163050436 UTC)
2715[ 240.503330] c0 72 INFO: task kworker/u8:0:6 blocked for more than 120 seconds.
2716[ 240.503342] c0 72 Tainted: G W 3.18.52-g06de206-dirty #1
2717[ 240.503346] c0 72 "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
2718[ 240.503352] kworker/u8:0 D ffffffc000088248 0 6 2 0x00000000
2719[ 240.503373] Workqueue: mpm msm_mpm_work_fn
2720[ 240.503380] c0 72 Call trace:
2721[ 240.503390] c0 72 [<ffffffc000088248>] __switch_to+0xb0/0xbc
2722[ 240.503400] c0 72 [<ffffffc000fdd994>] __schedule+0x31c/0x7b4
2723[ 240.503406] c0 72 [<ffffffc000fdde54>] schedule+0x28/0x74
2724[ 240.503412] c0 72 [<ffffffc000fe0e30>] schedule_timeout+0x21c/0x26c
2725[ 240.503418] c0 72 [<ffffffc000fdedbc>] wait_for_common+0xac/0x160
2726[ 240.503424] c0 72 [<ffffffc000fdee84>] wait_for_completion+0x14/0x1c
2727[ 240.503430] c0 72 [<ffffffc0004b2a08>] msm_mpm_work_fn+0x34/0xa8
2728[ 240.503439] c0 72 [<ffffffc0000c619c>] process_one_work+0x164/0x49c
2729[ 240.503445] c0 72 [<ffffffc0000c6da0>] worker_thread+0x140/0x4e4
2730[ 240.503451] c0 72 [<ffffffc0000cc16c>] kthread+0xe8/0xfc
2731[ 240.503473] c0 72 INFO: task mdss_dsi_event:158 blocked for more than 120 seconds.
2732[ 240.503478] c0 72 Tainted: G W 3.18.52-g06de206-dirty #1
2733[ 240.503482] c0 72 "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
2734[ 240.503486] mdss_dsi_event D ffffffc000088248 0 158 2 0x00000000
2735[ 240.503495] c0 72 Call trace:
2736[ 240.503501] c0 72 [<ffffffc000088248>] __switch_to+0xb0/0xbc
2737[ 240.503507] c0 72 [<ffffffc000fdd994>] __schedule+0x31c/0x7b4
2738[ 240.503513] c0 72 [<ffffffc000fdde54>] schedule+0x28/0x74
2739[ 240.503521] c0 72 [<ffffffc000460544>] dsi_event_thread+0x15c/0x30c
2740[ 240.503526] c0 72 [<ffffffc0000cc16c>] kthread+0xe8/0xfc
2741[ 240.503569] c0 72 INFO: task ngd_rx_thread1:410 blocked for more than 120 seconds.
2742[ 240.503573] c0 72 Tainted: G W 3.18.52-g06de206-dirty #1
2743[ 240.503577] c0 72 "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
2744[ 240.503581] ngd_rx_thread1 D ffffffc000088248 0 410 2 0x00000000
2745[ 240.503590] c0 72 Call trace:
2746[ 240.503596] c0 72 [<ffffffc000088248>] __switch_to+0xb0/0xbc
2747[ 240.503602] c0 72 [<ffffffc000fdd994>] __schedule+0x31c/0x7b4
2748[ 240.503608] c0 72 [<ffffffc000fdde54>] schedule+0x28/0x74
2749[ 240.503613] c0 72 [<ffffffc000fe0e30>] schedule_timeout+0x21c/0x26c
2750[ 240.503619] c0 72 [<ffffffc000fdedbc>] wait_for_common+0xac/0x160
2751[ 240.503624] c0 72 [<ffffffc000fdee84>] wait_for_completion+0x14/0x1c
2752[ 240.503631] c0 72 [<ffffffc00068b2bc>] ngd_slim_rx_msgq_thread+0x6c/0x240
2753[ 240.503637] c0 72 [<ffffffc0000cc16c>] kthread+0xe8/0xfc
2754[ 240.503642] c0 72 INFO: task ngd_notify_sl1:411 blocked for more than 120 seconds.
2755[ 240.503647] c0 72 Tainted: G W 3.18.52-g06de206-dirty #1
2756[ 240.503650] c0 72 "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
2757[ 240.503654] ngd_notify_sl1 D ffffffc000088248 0 411 2 0x00000000
2758[ 240.503662] c0 72 Call trace:
2759[ 240.503668] c0 72 [<ffffffc000088248>] __switch_to+0xb0/0xbc
2760[ 240.503674] c0 72 [<ffffffc000fdd994>] __schedule+0x31c/0x7b4
2761[ 240.503679] c0 72 [<ffffffc000fdde54>] schedule+0x28/0x74
2762[ 240.503685] c0 72 [<ffffffc000fe0e30>] schedule_timeout+0x21c/0x26c
2763[ 240.503690] c0 72 [<ffffffc000fdedbc>] wait_for_common+0xac/0x160
2764[ 240.503696] c0 72 [<ffffffc000fdee84>] wait_for_completion+0x14/0x1c
2765[ 240.503701] c0 72 [<ffffffc000688d60>] ngd_notify_slaves+0x80/0x178
2766[ 240.503706] c0 72 [<ffffffc0000cc16c>] kthread+0xe8/0xfc
2767[ 244.213341] c0 312 FG: fg_is_batt_id_valid: fg batt sts 0x28
2768[ 246.240209] [BATT] chg_full_check_worker: vol:4229, curr=-275, is_full_count=0, is_full=0 at 246240227600 (2019-04-11 04:22:27.216587850 UTC)
2769[ 249.442500] c2 280 [BATT] calculate_batt_cycle_info: g_batt_first_use_time = 2019-04-11 04:19:26, g_overheat_55_sec = 0, g_total_level_raw = 0
2770[ 249.442506] c2 280 [BATT] calculate_batt_cycle_info: save batt cycle data every 50%
2771[ 249.442518] [BATT] ibat_max=3400000,ibat_new=3400000,prev_vol_limit=0,prev_ibat_health=1,chg_limit_reason=0,prev_screen_warm=0,prev_screen_hot=0,is_over_ibat=0,htc_batt_info.state=0x1 at 249442533231 (2019-04-11 04:22:30.418900461 UTC)
2772[ 249.442526] [BATT] set ibat max(3400000),ibat_total=3000000[3000000,0],ibat_total_new=3400000,is_parallel=0 at 249442540263 (2019-04-11 04:22:30.418908742 UTC)
2773[ 249.442532] [BATT] set_batt_psy_property. value(3400000) prop(32) at 249442546617 (2019-04-11 04:22:30.418916034 UTC)
2774[ 249.442539] c2 280 SMBCHG: smbchg_set_fastchg_current_user: User setting FCC to 3400
2775[ 249.445075] c2 280 [BATT][SMBCHG] 0x1010=10,0x1210=00,0x1242=00,0x1310=04,0x1340=02,0x1608=10,0x1610=01,cc=2801529uAh,warm_temp=470,cool_temp=100,pmic=rev1.1,sink_current=1,pd_chgr=0,wake_reason=0,smb_curr=12mA,batfet_wa=0
2776[ 249.445226] c2 280 [BATT][SMBCHG] CHG_STS[0B:0F]=[02,6e,9f,05,00],CHG_CFG[F0:F4]=[0f,04,1f,00,2e],CHG_CFG[F5:F9]=[00,00,01,02,02],CHG_CFG[FA:FF]=[1c,47,42,38,00,08],BAT_CFG[F0:F5]=[0f,04,06,c5,00,03],BAT_CFG[F6:FB]=[03,3b,2a,04,c8,41]
2777[ 249.445233] [BATT][SMBCHG] USB_STS[07:0B]=[10,02,22,08,08],USB_STS[0C:0F]=[00,08,0f,ff],USB_CFG[F0:F5]=[0f,02,07,04,11,ab],MISC_CFG[F0:F4]=[0f,00,12,04,25],MISC_CFG[F5:F9]=[38,18,91,e0,00],MISC_CFG[FA:FF]=[00,03,22,04,e0,02],SMB1351[00:06]=[02,1c,87,ef,08,11,6b,],[32]=[00]
2778[ 249.448106] [BATT] ID=2,level=84,level_raw=84,vol=4229mV,temp=312,current=-275419uA,chg_name=USB,chg_src=1,chg_en=1,health=1,overload=0,duration=0min,vbus=4876mV,max_iusb=500mA,chg_limit_reason=0,chg_stop_reason=0,consistent=-1,flag=0x00000000,AICL=1700mA,htc_ext=0x00,usb_temp=292,usb_overheat=0,level_accu=0 at 249448121253 (2019-04-11 04:22:30.424473326 UTC)
2779[ 266.293334] [BATT] chg_full_check_worker: vol:4229, curr=-275, is_full_count=0, is_full=0 at 266293355066 (2019-04-11 04:22:47.269713285 UTC)
2780[ 274.293344] c0 312 FG: fg_is_batt_id_valid: fg batt sts 0x28
2781[ 286.346663] [BATT] chg_full_check_worker: vol:4231, curr=-274, is_full_count=0, is_full=0 at 286346686752 (2019-04-11 04:23:07.323044450 UTC)
2782[ 304.373338] c0 312 FG: fg_is_batt_id_valid: fg batt sts 0x28
2783[ 306.400205] [BATT] chg_full_check_worker: vol:4232, curr=-275, is_full_count=0, is_full=0 at 306400230520 (2019-04-11 04:23:27.376589989 UTC)
2784[ 309.602699] c2 280 [BATT] calculate_batt_cycle_info: g_batt_first_use_time = 2019-04-11 04:19:26, g_overheat_55_sec = 0, g_total_level_raw = 0
2785[ 309.602706] c2 280 [BATT] calculate_batt_cycle_info: save batt cycle data every 50%
2786[ 309.602719] [BATT] ibat_max=3400000,ibat_new=3400000,prev_vol_limit=0,prev_ibat_health=1,chg_limit_reason=0,prev_screen_warm=0,prev_screen_hot=0,is_over_ibat=0,htc_batt_info.state=0x1 at 309602739641 (2019-04-11 04:23:30.579106662 UTC)
2787[ 309.602727] [BATT] set ibat max(3400000),ibat_total=3000000[3000000,0],ibat_total_new=3400000,is_parallel=0 at 309602746620 (2019-04-11 04:23:30.579115100 UTC)
2788[ 309.602732] [BATT] set_batt_psy_property. value(3400000) prop(32) at 309602752558 (2019-04-11 04:23:30.579121818 UTC)
2789[ 309.602739] c2 280 SMBCHG: smbchg_set_fastchg_current_user: User setting FCC to 3400
2790[ 309.605273] c2 280 [BATT][SMBCHG] 0x1010=10,0x1210=00,0x1242=00,0x1310=04,0x1340=02,0x1608=10,0x1610=01,cc=2807543uAh,warm_temp=470,cool_temp=100,pmic=rev1.1,sink_current=1,pd_chgr=0,wake_reason=0,smb_curr=12mA,batfet_wa=0
2791[ 309.605423] c2 280 [BATT][SMBCHG] CHG_STS[0B:0F]=[02,6e,9f,05,00],CHG_CFG[F0:F4]=[0f,04,1f,00,2e],CHG_CFG[F5:F9]=[00,00,01,02,02],CHG_CFG[FA:FF]=[1c,47,42,38,00,08],BAT_CFG[F0:F5]=[0f,04,06,c5,00,03],BAT_CFG[F6:FB]=[03,3b,2a,04,c8,41]
2792[ 309.605429] [BATT][SMBCHG] USB_STS[07:0B]=[10,02,22,08,08],USB_STS[0C:0F]=[00,08,0f,ff],USB_CFG[F0:F5]=[0f,02,07,04,11,ab],MISC_CFG[F0:F4]=[0f,00,12,04,25],MISC_CFG[F5:F9]=[38,18,91,e0,00],MISC_CFG[FA:FF]=[00,03,22,04,e0,02],SMB1351[00:06]=[02,1c,87,ef,08,11,6b,],[32]=[00]
2793[ 309.608287] [BATT] ID=2,level=84,level_raw=84,vol=4232mV,temp=315,current=-275419uA,chg_name=USB,chg_src=1,chg_en=1,health=1,overload=0,duration=0min,vbus=4878mV,max_iusb=500mA,chg_limit_reason=0,chg_stop_reason=0,consistent=-1,flag=0x00000000,AICL=1700mA,htc_ext=0x00,usb_temp=292,usb_overheat=0,level_accu=0 at 309608308496 (2019-04-11 04:23:30.584660569 UTC)
2794[ 326.453310] [BATT] chg_full_check_worker: vol:4232, curr=-275, is_full_count=0, is_full=0 at 326453337153 (2019-04-11 04:23:47.429696830 UTC)
2795[ 334.453320] c0 312 FG: fg_is_batt_id_valid: fg batt sts 0x28
2796[ 344.405601] c0 299 FG: fg_soc_irq_handler: triggered 0x21
2797[ 344.413415] c0 312 SMBCHG: smbchg_external_power_changed: usb type = 4, current_limit = 500, rc = 0
2798[ 344.413424] c0 312 SMBCHG: smbchg_stay_awake: staying awake: 0x02 (bit 2)
2799[ 344.413430] c0 312 SMBCHG: smbchg_vfloat_adjust_check: Starting vfloat adjustments
2800[ 344.414813] c0 42 SMBCHG: smbchg_relax: relaxing: 0x00 (bit 2)
2801[ 344.416778] c0 549 [BATT] calculate_batt_cycle_info: g_batt_first_use_time = 2019-04-11 04:19:26, g_overheat_55_sec = 0, g_total_level_raw = 1
2802[ 344.416792] [BATT] write battery data: level:85, temp:315, time:1554956645 at 344416816443 (2019-04-11 04:24:05.393182630 UTC)
2803[ 344.416807] [BATT] ibat_max=3400000,ibat_new=3400000,prev_vol_limit=0,prev_ibat_health=1,chg_limit_reason=0,prev_screen_warm=0,prev_screen_hot=0,is_over_ibat=0,htc_batt_info.state=0x1 at 344416830818 (2019-04-11 04:24:05.393197578 UTC)
2804[ 344.416815] [BATT] set ibat max(3400000),ibat_total=3000000[3000000,0],ibat_total_new=3400000,is_parallel=0 at 344416839099 (2019-04-11 04:24:05.393206953 UTC)
2805[ 344.416822] [BATT] set_batt_psy_property. value(3400000) prop(32) at 344416846078 (2019-04-11 04:24:05.393214714 UTC)
2806[ 344.416830] c0 549 SMBCHG: smbchg_set_fastchg_current_user: User setting FCC to 3400
2807[ 344.419466] c0 549 [BATT][SMBCHG] 0x1010=10,0x1210=00,0x1242=00,0x1310=04,0x1340=02,0x1608=10,0x1610=01,cc=2810594uAh,warm_temp=470,cool_temp=100,pmic=rev1.1,sink_current=1,pd_chgr=0,wake_reason=0,smb_curr=12mA,batfet_wa=0
2808[ 344.419621] c0 549 [BATT][SMBCHG] CHG_STS[0B:0F]=[02,6e,9f,05,00],CHG_CFG[F0:F4]=[0f,04,1f,00,2e],CHG_CFG[F5:F9]=[00,00,01,02,02],CHG_CFG[FA:FF]=[1c,47,42,38,00,08],BAT_CFG[F0:F5]=[0f,04,06,c5,00,03],BAT_CFG[F6:FB]=[03,3b,2a,04,c8,41]
2809[ 344.419630] [BATT][SMBCHG] USB_STS[07:0B]=[10,02,22,08,08],USB_STS[0C:0F]=[00,08,0f,ff],USB_CFG[F0:F5]=[0f,02,07,04,11,ab],MISC_CFG[F0:F4]=[0f,00,12,04,25],MISC_CFG[F5:F9]=[38,18,91,e0,00],MISC_CFG[FA:FF]=[00,03,22,04,e0,02],SMB1351[00:06]=[02,1c,87,ef,08,11,6b,],[32]=[00]
2810[ 344.422557] [BATT] ID=2,level=85,level_raw=85,vol=4233mV,temp=315,current=-274809uA,chg_name=USB,chg_src=1,chg_en=1,health=1,overload=0,duration=0min,vbus=4872mV,max_iusb=500mA,chg_limit_reason=0,chg_stop_reason=0,consistent=-1,flag=0x00000000,AICL=1700mA,htc_ext=0x00,usb_temp=292,usb_overheat=0,level_accu=1 at 344422582016 (2019-04-11 04:24:05.398930339 UTC)
2811[ 346.506646] [BATT] chg_full_check_worker: vol:4233, curr=-274, is_full_count=0, is_full=0 at 346506676078 (2019-04-11 04:24:07.483035130 UTC)
2812[ 360.503307] c0 72 INFO: task kworker/u8:0:6 blocked for more than 120 seconds.
2813[ 360.503321] c0 72 Tainted: G W 3.18.52-g06de206-dirty #1
2814[ 360.503326] c0 72 "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
2815[ 360.503331] kworker/u8:0 D ffffffc000088248 0 6 2 0x00000000
2816[ 360.503353] Workqueue: mpm msm_mpm_work_fn
2817[ 360.503359] c0 72 Call trace:
2818[ 360.503369] c0 72 [<ffffffc000088248>] __switch_to+0xb0/0xbc
2819[ 360.503379] c0 72 [<ffffffc000fdd994>] __schedule+0x31c/0x7b4
2820[ 360.503385] c0 72 [<ffffffc000fdde54>] schedule+0x28/0x74
2821[ 360.503392] c0 72 [<ffffffc000fe0e30>] schedule_timeout+0x21c/0x26c
2822[ 360.503398] c0 72 [<ffffffc000fdedbc>] wait_for_common+0xac/0x160
2823[ 360.503403] c0 72 [<ffffffc000fdee84>] wait_for_completion+0x14/0x1c
2824[ 360.503409] c0 72 [<ffffffc0004b2a08>] msm_mpm_work_fn+0x34/0xa8
2825[ 360.503417] c0 72 [<ffffffc0000c619c>] process_one_work+0x164/0x49c
2826[ 360.503423] c0 72 [<ffffffc0000c6da0>] worker_thread+0x140/0x4e4
2827[ 360.503429] c0 72 [<ffffffc0000cc16c>] kthread+0xe8/0xfc
2828[ 360.503451] c0 72 INFO: task mdss_dsi_event:158 blocked for more than 120 seconds.
2829[ 360.503455] c0 72 Tainted: G W 3.18.52-g06de206-dirty #1
2830[ 360.503459] c0 72 "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
2831[ 360.503463] mdss_dsi_event D ffffffc000088248 0 158 2 0x00000000
2832[ 360.503472] c0 72 Call trace:
2833[ 360.503478] c0 72 [<ffffffc000088248>] __switch_to+0xb0/0xbc
2834[ 360.503485] c0 72 [<ffffffc000fdd994>] __schedule+0x31c/0x7b4
2835[ 360.503490] c0 72 [<ffffffc000fdde54>] schedule+0x28/0x74
2836[ 360.503497] c0 72 [<ffffffc000460544>] dsi_event_thread+0x15c/0x30c
2837[ 360.503503] c0 72 [<ffffffc0000cc16c>] kthread+0xe8/0xfc
2838[ 360.503545] c0 72 INFO: task ngd_rx_thread1:410 blocked for more than 120 seconds.
2839[ 360.503549] c0 72 Tainted: G W 3.18.52-g06de206-dirty #1
2840[ 360.503553] c0 72 "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
2841[ 360.503557] ngd_rx_thread1 D ffffffc000088248 0 410 2 0x00000000
2842[ 360.503565] c0 72 Call trace:
2843[ 360.503571] c0 72 [<ffffffc000088248>] __switch_to+0xb0/0xbc
2844[ 360.503578] c0 72 [<ffffffc000fdd994>] __schedule+0x31c/0x7b4
2845[ 360.503583] c0 72 [<ffffffc000fdde54>] schedule+0x28/0x74
2846[ 360.503588] c0 72 [<ffffffc000fe0e30>] schedule_timeout+0x21c/0x26c
2847[ 360.503594] c0 72 [<ffffffc000fdedbc>] wait_for_common+0xac/0x160
2848[ 360.503599] c0 72 [<ffffffc000fdee84>] wait_for_completion+0x14/0x1c
2849[ 360.503607] c0 72 [<ffffffc00068b2bc>] ngd_slim_rx_msgq_thread+0x6c/0x240
2850[ 360.503612] c0 72 [<ffffffc0000cc16c>] kthread+0xe8/0xfc
2851[ 360.503617] c0 72 INFO: task ngd_notify_sl1:411 blocked for more than 120 seconds.
2852[ 360.503621] c0 72 Tainted: G W 3.18.52-g06de206-dirty #1
2853[ 360.503625] c0 72 "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
2854[ 360.503629] ngd_notify_sl1 D ffffffc000088248 0 411 2 0x00000000
2855[ 360.503637] c0 72 Call trace:
2856[ 360.503643] c0 72 [<ffffffc000088248>] __switch_to+0xb0/0xbc
2857[ 360.503648] c0 72 [<ffffffc000fdd994>] __schedule+0x31c/0x7b4
2858[ 360.503654] c0 72 [<ffffffc000fdde54>] schedule+0x28/0x74
2859[ 360.503659] c0 72 [<ffffffc000fe0e30>] schedule_timeout+0x21c/0x26c
2860[ 360.503665] c0 72 [<ffffffc000fdedbc>] wait_for_common+0xac/0x160
2861[ 360.503670] c0 72 [<ffffffc000fdee84>] wait_for_completion+0x14/0x1c
2862[ 360.503675] c0 72 [<ffffffc000688d60>] ngd_notify_slaves+0x80/0x178
2863[ 360.503680] c0 72 [<ffffffc0000cc16c>] kthread+0xe8/0xfc
2864[ 364.533327] c0 42 FG: fg_is_batt_id_valid: fg batt sts 0x28
2865[ 366.560196] [BATT] chg_full_check_worker: vol:4234, curr=-275, is_full_count=0, is_full=0 at 366560227451 (2019-04-11 04:24:27.536586399 UTC)
2866[ 386.613297] [BATT] chg_full_check_worker: vol:4234, curr=-275, is_full_count=0, is_full=0 at 386613330334 (2019-04-11 04:24:47.589689594 UTC)
2867[ 394.613313] c0 42 FG: fg_is_batt_id_valid: fg batt sts 0x28
2868[ 404.535830] c0 549 [BATT] calculate_batt_cycle_info: g_batt_first_use_time = 2019-04-11 04:19:26, g_overheat_55_sec = 0, g_total_level_raw = 1
2869[ 404.535853] [BATT] ibat_max=3400000,ibat_new=3400000,prev_vol_limit=0,prev_ibat_health=1,chg_limit_reason=0,prev_screen_warm=0,prev_screen_hot=0,is_over_ibat=0,htc_batt_info.state=0x1 at 404535883421 (2019-04-11 04:25:05.512248671 UTC)
2870[ 404.535863] [BATT] set ibat max(3400000),ibat_total=3000000[3000000,0],ibat_total_new=3400000,is_parallel=0 at 404535892692 (2019-04-11 04:25:05.512260182 UTC)
2871[ 404.535870] [BATT] set_batt_psy_property. value(3400000) prop(32) at 404535900400 (2019-04-11 04:25:05.512268671 UTC)
2872[ 404.535879] c0 549 SMBCHG: smbchg_set_fastchg_current_user: User setting FCC to 3400
2873[ 404.538454] c0 549 [BATT][SMBCHG] 0x1010=10,0x1210=00,0x1242=00,0x1310=04,0x1340=02,0x1608=10,0x1610=01,cc=2816606uAh,warm_temp=470,cool_temp=100,pmic=rev1.1,sink_current=1,pd_chgr=0,wake_reason=0,smb_curr=12mA,batfet_wa=0
2874[ 404.538609] c0 549 [BATT][SMBCHG] CHG_STS[0B:0F]=[02,6e,9f,05,00],CHG_CFG[F0:F4]=[0f,04,1f,00,2e],CHG_CFG[F5:F9]=[00,00,01,02,02],CHG_CFG[FA:FF]=[1c,47,42,38,00,08],BAT_CFG[F0:F5]=[0f,04,06,c5,00,03],BAT_CFG[F6:FB]=[03,3b,2a,04,c8,41]
2875[ 404.538618] [BATT][SMBCHG] USB_STS[07:0B]=[10,02,22,08,08],USB_STS[0C:0F]=[00,08,0f,ff],USB_CFG[F0:F5]=[0f,02,07,04,11,ab],MISC_CFG[F0:F4]=[0f,00,12,04,25],MISC_CFG[F5:F9]=[38,18,91,e0,00],MISC_CFG[FA:FF]=[00,03,22,04,e0,02],SMB1351[00:06]=[02,1c,87,ef,08,11,6b,],[32]=[00]
2876[ 404.541564] [BATT] ID=2,level=85,level_raw=85,vol=4235mV,temp=312,current=-274504uA,chg_name=USB,chg_src=1,chg_en=1,health=1,overload=0,duration=0min,vbus=4874mV,max_iusb=500mA,chg_limit_reason=0,chg_stop_reason=0,consistent=-1,flag=0x00000000,AICL=1700mA,htc_ext=0x00,usb_temp=291,usb_overheat=0,level_accu=1 at 404541595609 (2019-04-11 04:25:05.517943516 UTC)
2877[ 406.666638] [BATT] chg_full_check_worker: vol:4235, curr=-274, is_full_count=0, is_full=0 at 406666672904 (2019-04-11 04:25:07.643032061 UTC)
2878[ 424.693314] c0 42 FG: fg_is_batt_id_valid: fg batt sts 0x28
2879[ 426.720184] [BATT] chg_full_check_worker: vol:4237, curr=-274, is_full_count=0, is_full=0 at 426720221569 (2019-04-11 04:25:27.696581090 UTC)
2880[ 446.773300] [BATT] chg_full_check_worker: vol:4237, curr=-274, is_full_count=0, is_full=0 at 446773339035 (2019-04-11 04:25:47.749698139 UTC)
2881[ 454.773311] c0 42 FG: fg_is_batt_id_valid: fg batt sts 0x28
2882[ 456.278715] c0 0 Report pwrkey press event
2883[ 456.461302] c0 0 [KEY] gpio_keys_gpio_isr: key 1-74, (40) update debounce mode
2884[ 456.461374] c0 0 Report pwrkey release event
2885[ 456.461545] c0 0 [KEY] gpio_keys_gpio_isr: key 1-74, (40) update debounce mode
2886[ 456.462008] c0 0 [KEY] gpio_keys_gpio_isr: key 1-74, (40) update debounce mode
2887[ 456.462031] c0 0 [KEY] gpio_keys_gpio_isr: key 1-74, (40) update debounce mode
2888[ 456.462053] c0 0 [KEY] gpio_keys_gpio_isr: key 1-74, (40) update debounce mode
2889[ 456.500342] c3 442 [TP]:synaptics_rmi4_fb_notifier_cb, event = 16 blank = 0
2890[ 456.676389] c3 442 [BATT] fb_notifier_callback-> display is On
2891[ 456.678952] c0 549 [BATT] calculate_batt_cycle_info: g_batt_first_use_time = 2019-04-11 04:19:26, g_overheat_55_sec = 0, g_total_level_raw = 1
2892[ 456.678972] [BATT] ibat_max=3400000,ibat_new=3400000,prev_vol_limit=0,prev_ibat_health=1,chg_limit_reason=0,prev_screen_warm=0,prev_screen_hot=0,is_over_ibat=0,htc_batt_info.state=0x0 at 456679007991 (2019-04-11 04:25:57.655372980 UTC)
2893[ 456.678982] [BATT] set ibat max(3400000),ibat_total=3000000[3000000,0],ibat_total_new=3400000,is_parallel=0 at 456679017105 (2019-04-11 04:25:57.655384699 UTC)
2894[ 456.678990] [BATT] set_batt_psy_property. value(3400000) prop(32) at 456679024553 (2019-04-11 04:25:57.655393189 UTC)
2895[ 456.678998] c0 549 SMBCHG: smbchg_set_fastchg_current_user: User setting FCC to 3400
2896[ 456.681572] c0 549 [BATT][SMBCHG] 0x1010=10,0x1210=00,0x1242=00,0x1310=04,0x1340=02,0x1608=10,0x1610=01,cc=2822611uAh,warm_temp=470,cool_temp=100,pmic=rev1.1,sink_current=1,pd_chgr=0,wake_reason=0,smb_curr=12mA,batfet_wa=0
2897[ 456.681726] c0 549 [BATT][SMBCHG] CHG_STS[0B:0F]=[02,6e,9f,85,00],CHG_CFG[F0:F4]=[0f,04,1f,00,2e],CHG_CFG[F5:F9]=[00,00,01,02,02],CHG_CFG[FA:FF]=[1c,47,42,38,00,08],BAT_CFG[F0:F5]=[0f,04,06,c5,00,03],BAT_CFG[F6:FB]=[03,3b,2a,04,c8,41]
2898[ 456.681735] [BATT][SMBCHG] USB_STS[07:0B]=[10,02,22,08,08],USB_STS[0C:0F]=[00,08,0f,ff],USB_CFG[F0:F5]=[0f,02,07,04,11,ab],MISC_CFG[F0:F4]=[0f,00,12,04,25],MISC_CFG[F5:F9]=[38,18,91,e0,00],MISC_CFG[FA:FF]=[00,03,22,04,e0,02],SMB1351[00:06]=[02,1c,87,ef,08,11,6b,],[32]=[00]
2899[ 456.684366] [BATT] ID=2,level=85,level_raw=85,vol=4238mV,temp=315,current=-274351uA,chg_name=USB,chg_src=1,chg_en=1,health=1,overload=0,duration=0min,vbus=4878mV,max_iusb=500mA,chg_limit_reason=0,chg_stop_reason=0,consistent=-1,flag=0x00000000,AICL=1700mA,htc_ext=0x00,usb_temp=291,usb_overheat=0,level_accu=1 at 456684402366 (2019-04-11 04:25:57.660749856 UTC)
2900[ 457.904814] c1 284 [TP]:[NS]: IM:20(M-20), CIDIM:1(M-1), Freq:0, NS:1
2901[ 458.241981] c3 442 audit_printk_skb: 192 callbacks suppressed
2902[ 458.241991] c3 442 audit: type=1400 audit(1554956759.216:411): avc: denied { write } for pid=442 comm="recovery" name="enable" dev="sysfs" ino=41459 scontext=u:r:recovery:s0 tcontext=u:object_r:sysfs_vibrator:s0 tclass=file permissive=1
2903[ 458.242011] c3 442 audit: type=1400 audit(1554956759.216:412): avc: denied { open } for pid=442 comm="recovery" path="/sys/devices/virtual/timed_output/vibrator/enable" dev="sysfs" ino=41459 scontext=u:r:recovery:s0 tcontext=u:object_r:sysfs_vibrator:s0 tclass=file permissive=1
2904[ 466.753110] c2 442 audit: type=1400 audit(1554956767.726:413): avc: denied { search } for pid=442 comm="recovery" name="0:0:0:0" dev="sysfs" ino=35572 scontext=u:r:recovery:s0 tcontext=u:object_r:sysfs_scsi_devices_0000:s0 tclass=dir permissive=1
2905[ 466.753134] c2 442 audit: type=1400 audit(1554956767.726:414): avc: denied { read } for pid=442 comm="recovery" name="sda33" dev="sysfs" ino=37253 scontext=u:r:recovery:s0 tcontext=u:object_r:sysfs_scsi_devices_0000:s0 tclass=dir permissive=1
2906[ 466.753151] c2 442 audit: type=1400 audit(1554956767.726:415): avc: denied { open } for pid=442 comm="recovery" path="/sys/devices/soc/624000.ufshc/host0/target0:0:0/0:0:0:0/block/sda/sda33" dev="sysfs" ino=37253 scontext=u:r:recovery:s0 tcontext=u:object_r:sysfs_scsi_devices_0000:s0 tclass=dir permissive=1
2907[ 466.753250] c2 442 audit: type=1400 audit(1554956767.726:416): avc: denied { getattr } for pid=442 comm="recovery" path="/sys/devices/soc/624000.ufshc/host0/target0:0:0/0:0:0:0/block/sda/sda33/partition" dev="sysfs" ino=37259 scontext=u:r:recovery:s0 tcontext=u:object_r:sysfs_scsi_devices_0000:s0 tclass=file permissive=1
2908[ 466.753336] c2 442 audit: type=1400 audit(1554956767.729:417): avc: denied { read } for pid=442 comm="recovery" name="dev" dev="sysfs" ino=36254 scontext=u:r:recovery:s0 tcontext=u:object_r:sysfs_scsi_devices_0000:s0 tclass=file permissive=1
2909[ 466.753351] c2 442 audit: type=1400 audit(1554956767.729:418): avc: denied { open } for pid=442 comm="recovery" path="/sys/devices/soc/624000.ufshc/host0/target0:0:0/0:0:0:0/block/sda/dev" dev="sysfs" ino=36254 scontext=u:r:recovery:s0 tcontext=u:object_r:sysfs_scsi_devices_0000:s0 tclass=file permissive=1
2910[ 466.763806] c2 442 EXT4-fs (sda33): mounted filesystem with ordered data mode. Opts:
2911[ 466.775114] c2 442 EXT4-fs (sda33): mounted filesystem with ordered data mode. Opts:
2912[ 466.826626] [BATT] chg_full_check_worker: vol:4238, curr=-274, is_full_count=0, is_full=0 at 466826668064 (2019-04-11 04:26:07.803026127 UTC)
2913[ 466.870091] c2 442 audit: type=1400 audit(1554956767.846:419): avc: denied { write } for pid=442 comm="recovery" name=".twrps" dev="sda35" ino=589845 scontext=u:r:recovery:s0 tcontext=u:object_r:media_rw_data_file:s0 tclass=file permissive=1
2914[ 466.870815] c2 442 audit: type=1400 audit(1554956767.846:420): avc: denied { relabelfrom } for pid=442 comm="recovery" name=".twrps" dev="sda35" ino=589845 scontext=u:r:recovery:s0 tcontext=u:object_r:media_rw_data_file:s0 tclass=file permissive=1
2915[ 466.870877] c2 442 audit: type=1400 audit(1554956767.846:421): avc: denied { relabelto } for pid=442 comm="recovery" name=".twrps" dev="sda35" ino=589845 scontext=u:r:recovery:s0 tcontext=u:object_r:media_rw_data_file:s0 tclass=file permissive=1
2916[ 466.870938] c2 442 audit: type=1400 audit(1554956767.846:422): avc: denied { setattr } for pid=442 comm="recovery" name=".twrps" dev="sda35" ino=589845 scontext=u:r:recovery:s0 tcontext=u:object_r:media_rw_data_file:s0 tclass=file permissive=1
2917[ 466.923436] c2 1 init: Clear action queue and start shutdown trigger
2918[ 466.923495] c2 1 init: processing action (shutdown_done) from (<Builtin Action>:0)
2919[ 466.923511] c2 1 init: Reboot start, reason: reboot,bootloader, rebootTarget: bootloader
2920[ 466.923869] c2 1 init: Shutdown timeout: 0 ms
2921[ 466.923913] c2 1 init: Sending signal 9 to service 'ueventd' (pid 432) process group...
2922[ 466.923983] c2 1 init: Failed to open process cgroup uid 0 pid 432: No such file or directory
2923[ 466.923997] c2 1 init: Error encountered killing process cgroup uid 0 pid 432: No such file or directory
2924[ 466.924016] c2 1 init: Sending signal 9 to service 'recovery' (pid 442) process group...
2925[ 466.927946] c2 532 mtp_release
2926[ 466.939829] c2 442 mdss_mdp_overlay_release: Unable to unset pipe(s) ndx=0x18 unset=0x0
2927[ 467.128794] c0 1 init: Failed to kill process cgroup uid 0 pid 442 in 204ms, 1 processes remain
2928[ 467.128852] c0 1 init: Sending signal 9 to service 'hwservicemanager' (pid 438) process group...
2929[ 467.134155] c0 1 init: Successfully killed process cgroup uid 0 pid 438 in 5ms
2930[ 467.134310] c0 1 init: Sending signal 9 to service 'boot-1-0' (pid 440) process group...
2931[ 467.139605] c0 1 init: Successfully killed process cgroup uid 0 pid 440 in 5ms
2932[ 467.139707] c0 1 init: Sending signal 9 to service 'keymaster-3-0' (pid 478) process group...
2933[ 467.145001] c0 1 init: Successfully killed process cgroup uid 0 pid 478 in 5ms
2934[ 467.145102] c0 1 init: Sending signal 9 to service 'gatekeeper-1-0' (pid 477) process group...
2935[ 467.150412] c0 1 init: Successfully killed process cgroup uid 0 pid 477 in 5ms
2936[ 467.150530] c0 1 init: Sending signal 9 to service 'sbinqseecomd' (pid 475) process group...
2937[ 467.155884] c0 1 init: Successfully killed process cgroup uid 0 pid 475 in 5ms
2938[ 467.155985] c0 1 init: Sending signal 9 to service 'servicemanager' (pid 476) process group...
2939[ 467.161853] c0 1 init: Successfully killed process cgroup uid 0 pid 476 in 5ms
2940[ 467.162046] c0 1 init: Service 'hwservicemanager' (pid 438) killed by signal 9
2941[ 467.162229] c0 1 init: Service 'boot-1-0' (pid 440) killed by signal 9
2942[ 467.162371] c0 1 init: Service 'sbinqseecomd' (pid 475) killed by signal 9
2943[ 467.162491] c0 1 init: Service 'servicemanager' (pid 476) killed by signal 9
2944[ 467.162597] c0 1 init: Service 'gatekeeper-1-0' (pid 477) killed by signal 9
2945[ 467.162733] c0 1 init: Service 'keymaster-3-0' (pid 478) killed by signal 9
2946[ 467.162897] c0 1 init: Untracked pid 479 killed by signal 9
2947[ 467.162931] c0 1 init: vold not running, skipping vold shutdown
2948[ 467.162949] c0 1 init: Sending signal 9 to service 'adbd' (pid 533) process group...
2949[ 467.163607] c0 541 dwc3 6a00000.dwc3: request 0000000000000000 was not queued to ep0out
2950[ 467.169001] c0 1 init: Successfully killed process cgroup uid 0 pid 533 in 6ms
2951[ 467.180422] c0 1 init: umounted /dev/block/sda35:/sdcard opts rw,seclabel,relatime,data=ordered
2952[ 467.351467] c3 1 init: umounted /dev/block/sda35:/data opts rw,seclabel,relatime,data=ordered
2953[ 467.551812] c3 1 init: powerctl_shutdown_time_ms:628:0
2954[ 467.551825] c3 1 init: Reboot ending, jumping to kernel
2955[ 467.551880] c3 1 htc_reboot_block reboot_block: reason=77665500 msg=bootloader save to /misc+00003800
2956[ 467.553985] c3 1 htc_reboot_block reboot_block: wrote reason: 77665500
2957[ 467.553993] c3 1 [BATT] reboot_consistent_command_call: save batt cycle data
2958[ 467.553997] c3 1 [BATT] reboot_consistent_command_call: save consistent data
2959[ 467.554003] [BATT] write battery data: level:85, temp:315, time:1554956768 at 467554038970 (2019-04-11 04:26:08.530406095 UTC)
2960[ 467.554612] c3 1 sd 0:0:0:3: [sdd] Synchronizing SCSI cache
2961[ 467.554714] c3 1 sd 0:0:0:0: [sda] Synchronizing SCSI cache
2962[ 467.554975] c3 1 mdss_fb_release_all: try to close unopened fb 2! from pid:1 name:init
2963[ 467.555001] c3 1 mdss_fb_release_all: try to close unopened fb 1! from pid:1 name:init
2964[ 467.555018] c3 1 mdss_fb_release_all: try to close unopened fb 0! from pid:1 name:init
2965[ 467.555319] c3 1 [NFC] pn551_power_off_sequence ++
2966[ 467.555337] c3 1 [NFC] pn551_power_off_sequence : NFC_I2C_SCL set 0 0
2967[ 467.556344] c3 1 [NFC] pn551_power_off_sequence : NFC_I2C_SDA set 0 0
2968[ 467.606350] c3 1 [NFC] pn551_power_off_sequence --
2969[ 467.606847] c3 1 SMBCHG: usb_suspend: 5 voting for 0 - off
2970[ 467.607744] c3 1 SMB1351 smb1351_parallel_set_property: SMB1351 OTG Boost is disabled
2971[ 467.607749] c3 1 SMBCHG: smbchg_external_otg_regulator_disable: Disabling external OTG Boost
2972[ 467.607754] c3 1 SMB1351 smb1351_parallel_set_chg_present: set slave present = 1 -> 0
2973[ 467.607758] c3 1 SMB1351 smb1351_usb_suspend: reason = 16 requested_suspend = 1 suspended_status = 4 -> 20
2974[ 467.608013] c3 1 SMBCHG: is_hvdcp_present: HVDCP not support, return false
2975[ 467.608437] c0 1 reboot: Restarting system with command 'bootloader'
2976[ 467.608473] c0 1 Kernel command line: console=ttyHSL0,115200,n8 androidboot.console=ttyHSL0 androidboot.hardware=marlin user_debug=31 ehci-hcd.park=3 lpm_levels.sleep_disabled=1 cma=32M@0-0xffffffff loop.max_part=7 androidboot.fastboot=1 buildvariant=eng androidboot.bootdevice=624000.ufshc androidboot.verifiedbootstate=orange androidboot.veritymode=enforcing androidboot.keymaster=1 androidboot.serialno=HT72P0203430 androidboot.baseband=msm mdss_mdp.panel=1:dsi:0:qcom,mdss_dsi_samsung_s6e3ha3_wqhd_cmd:1:qcom,mdss_dsi_samsung_s6e3ha3_wqhd_cmd:cfg:split_dsi androidboot.slot_suffix=_a fpsimd.fpsimd_settings=0 app_setting.use_app_setting=0 kernelflag=0x00000000 debugflag=0x00000000 androidboot.hardware.revision=PVT radioflag=0x00000008 radioflagex1=0x00000000 radioflagex2=0x00000000 cpumask=0x00000000 androidboot.hardware.ddr=4096MB,Hynix,LPDDR4 androidboot.ddrinfo=00000006 androidboot.ddrsize=4GB androidboot.hardware.color=GRA00 androidboot.hardware.ufs=32GB,Samsung androidboot.msm.hw_ver_id=268[ 467.608519] c0 1 Going down for restart now
2977[ 467.608555] c0 1 msm_restart_prepare: restart by command: [bootloader]
2978[ 467.609137] c0 1 qcom,qpnp-power-on qpnp-power-on-11: PMIC@SID2: configuring PON for reset
2979[ 467.609733] c0 1 set restart reason = 0x77665500
2980[ 467.609738] c0 1 set restart msg = ''
2981[ 467.609744] c0 1
2982[ 467.609748] c0 1 [K] Restarting Linux version 3.18.52-g06de206-dirty (dees_troy@XPS15) (gcc version 4.9.x 20150123 (prerelease) (GCC) ) #1 SMP PREEMPT Wed Sep 13 08:12:37 CDT 2017
2983[ 467.609748] c0 1