· 5 years ago · Jun 03, 2020, 07:06 AM
1[ 0.000000] Booting Linux on physical CPU 0x0
2[ 0.000000] Linux version 4.14.83-perf-gb6d3259c1-dirty (root@andrea-pc) (clang version 6.0.9 for Android NDK) #1 SMP PREEMPT Sun Aug 25 19:47:33 CEST 2019
3[ 0.000000] Boot CPU: AArch64 Processor [51df805e]
4[ 0.000000] Powerup reason=0x80080
5[ 0.000000] Machine: Qualcomm Technologies, Inc. SM8150 V2 PM8150 CEPHEUS
6[ 0.000000] ramoops: msm_reserve_ramoops_memory addr=b0000000,size=400000
7[ 0.000000] ramoops: msm_reserve_ramoops_memory record_size=0,ftrace_size=0
8[ 0.000000] Memory limit set/overridden to 5068MB
9[ 0.000000] Reserved memory: created CMA memory pool at 0x00000000f5c00000, size 160 MiB
10[ 0.000000] OF: reserved mem: initialized node secure_display_region, compatible id shared-dma-pool
11[ 0.000000] Reserved memory: created CMA memory pool at 0x00000000f3400000, size 40 MiB
12[ 0.000000] OF: reserved mem: initialized node linux,cma, compatible id shared-dma-pool
13[ 0.000000] Reserved memory: created CMA memory pool at 0x00000000f2400000, size 16 MiB
14[ 0.000000] OF: reserved mem: initialized node qseecom_ta_region, compatible id shared-dma-pool
15[ 0.000000] Reserved memory: created CMA memory pool at 0x00000001bdc00000, size 36 MiB
16[ 0.000000] OF: reserved mem: initialized node mem_dump_region, compatible id shared-dma-pool
17[ 0.000000] Reserved memory: created CMA memory pool at 0x00000000f1c00000, size 8 MiB
18[ 0.000000] OF: reserved mem: initialized node sp_region, compatible id shared-dma-pool
19[ 0.000000] Reserved memory: created CMA memory pool at 0x00000000f0c00000, size 16 MiB
20[ 0.000000] OF: reserved mem: initialized node adsp_region, compatible id shared-dma-pool
21[ 0.000000] Reserved memory: created CMA memory pool at 0x00000000f0800000, size 4 MiB
22[ 0.000000] OF: reserved mem: initialized node cdsp_region, compatible id shared-dma-pool
23[ 0.000000] Removed memory: created DMA memory pool at 0x000000008b700000, size 5 MiB
24[ 0.000000] OF: reserved mem: initialized node camera_region@8b700000, compatible id removed-dma-pool
25[ 0.000000] Removed memory: created DMA memory pool at 0x000000008bc00000, size 1 MiB
26[ 0.000000] OF: reserved mem: initialized node pil_wlan_fw_region@8bc00000, compatible id removed-dma-pool
27[ 0.000000] Removed memory: created DMA memory pool at 0x000000008bd80000, size 0 MiB
28[ 0.000000] OF: reserved mem: initialized node pil_npu_region@8bd80000, compatible id removed-dma-pool
29[ 0.000000] Removed memory: created DMA memory pool at 0x000000008be00000, size 34 MiB
30[ 0.000000] OF: reserved mem: initialized node pil_adsp_region@8be00000, compatible id removed-dma-pool
31[ 0.000000] Removed memory: created DMA memory pool at 0x000000008e000000, size 150 MiB
32[ 0.000000] OF: reserved mem: initialized node modem_region@8e000000, compatible id removed-dma-pool
33[ 0.000000] Removed memory: created DMA memory pool at 0x0000000097600000, size 5 MiB
34[ 0.000000] OF: reserved mem: initialized node pil_video_region@97600000, compatible id removed-dma-pool
35[ 0.000000] Removed memory: created DMA memory pool at 0x0000000097b00000, size 20 MiB
36[ 0.000000] OF: reserved mem: initialized node pil_slpi_region@97b00000, compatible id removed-dma-pool
37[ 0.000000] Removed memory: created DMA memory pool at 0x0000000098f00000, size 0 MiB
38[ 0.000000] OF: reserved mem: initialized node pil_ipa_fw_region@98f00000, compatible id removed-dma-pool
39[ 0.000000] Removed memory: created DMA memory pool at 0x0000000098f10000, size 0 MiB
40[ 0.000000] OF: reserved mem: initialized node pil_ipa_gsi_region@98f10000, compatible id removed-dma-pool
41[ 0.000000] Removed memory: created DMA memory pool at 0x0000000098f15000, size 0 MiB
42[ 0.000000] OF: reserved mem: initialized node pil_gpu_region@98f15000, compatible id removed-dma-pool
43[ 0.000000] Removed memory: created DMA memory pool at 0x0000000099000000, size 1 MiB
44[ 0.000000] OF: reserved mem: initialized node pil_spss_region@99000000, compatible id removed-dma-pool
45[ 0.000000] Removed memory: created DMA memory pool at 0x0000000099100000, size 20 MiB
46[ 0.000000] OF: reserved mem: initialized node cdsp_regions@99100000, compatible id removed-dma-pool
47[ 0.000000] Reserved memory: created DMA memory pool at 0x000000009e400000, size 20 MiB
48[ 0.000000] OF: reserved mem: initialized node qseecom_region@0x9e400000, compatible id shared-dma-pool
49[ 0.000000] Removed memory: created DMA memory pool at 0x00000000a4c00000, size 60 MiB
50[ 0.000000] OF: reserved mem: initialized node cdsp_sec_regions@0xa4c00000, compatible id removed-dma-pool
51[ 0.000000] Removed memory: created DMA memory pool at 0x00000000af000000, size 16 MiB
52[ 0.000000] OF: reserved mem: initialized node ramdump_fb_region@af000000, compatible id removed-dma-pool
53[ 0.000000] On node 0 totalpages: 1188009
54[ 0.000000] DMA zone: 6275 pages used for memmap
55[ 0.000000] DMA zone: 0 pages reserved
56[ 0.000000] DMA zone: 401577 pages, LIFO batch:31
57[ 0.000000] Normal zone: 12288 pages used for memmap
58[ 0.000000] Normal zone: 786432 pages, LIFO batch:31
59[ 0.000000] psci: probing for conduit method from DT.
60[ 0.000000] psci: PSCIv1.1 detected in firmware.
61[ 0.000000] psci: Using standard PSCI v0.2 function IDs
62[ 0.000000] psci: MIGRATE_INFO_TYPE not supported.
63[ 0.000000] psci: SMC Calling Convention v1.1
64[ 0.000000] random: fast init done
65[ 0.000000] random: get_random_bytes called from start_kernel+0x90/0x490 with crng_init=1
66[ 0.000000] percpu: Embedded 23 pages/cpu @ffffffe23d7a1000 s53760 r8192 d32256 u94208
67[ 0.000000] pcpu-alloc: s53760 r8192 d32256 u94208 alloc=23*4096
68[ 0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 [0] 4 [0] 5 [0] 6 [0] 7
69[ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 1169446
70[ 0.000000] Kernel command line: ramoops_memreserve=4M rcupdate.rcu_expedited=1 rcu_nocbs=0-7 cgroup.memory=nokmem,nosocket console=ttyMSM0,115200n8 earlycon=msm_geni_serial,0xa90000 androidboot.hardware=qcom androidboot.console=ttyMSM0 androidboot.memcg=1 lpm_levels.sleep_disabled=1 video=vfb:640x400,bpp=32,memsize=3072000 msm_rtb.filter=0x237 service_locator.enable=1 swiotlb=2048 firmware_class.path=/vendor/firmware_mnt/image loop.max_part=7 androidboot.usbcontroller=a600000.dwc3 androidboot.selinux=permissive buildvariant=eng androidboot.verifiedbootstate=orange androidboot.keymaster=1 root=PARTUUID=653d477b-7427-6377-30cb-b48f7c806143 androidboot.bootdevice=1d84000.ufshc androidboot.serialno=f42901b9 androidboot.ramdump=disable androidboot.secureboot=1 androidboot.hypvm=disable androidboot.hwversion=1.19.0 androidboot.cpuid=0xec1a9505 androidboot.hwc=GLOBAL androidboot.hwlevel=MP androidboot.baseband=msm msm_drm.dsi_display0=dsi_samsung_fhd_ea8076_f1p2_cmd_display: rootwait ro init=
71[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
72[ 0.000000] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
73[ 0.000000] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
74[ 0.000000] software IO TLB [mem 0xf0400000-0xf0800000] (4MB) mapped at [ffffffe170400000-ffffffe1707fffff]
75[ 0.000000] Memory: 4261068K/4752036K available (19966K kernel code, 2472K rwdata, 7124K rodata, 6144K init, 6312K bss, 204248K reserved, 286720K cma-reserved)
76[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
77[ 0.000000] Preemptible hierarchical RCU implementation.
78[ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
79[ 0.000000] All grace periods are expedited (rcu_expedited).
80[ 0.000000] Tasks RCU enabled.
81[ 0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0
82[ 0.000000] GICv3: no VLPI support, no direct LPI support
83[ 0.000000] GICv3: CPU0: found redistributor 0 region 0:0x0000000017a60000
84[ 0.000000] PDC SM8150 initialized
85[ 0.000000] Offload RCU callbacks from CPUs: 0-7.
86[ 0.000000] arch_timer: cp15 and mmio timer(s) running at 19.20MHz (virt/virt).
87[ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x46d987e47, max_idle_ns: 440795202767 ns
88[ 0.000004] sched_clock: 56 bits at 19MHz, resolution 52ns, wraps every 4398046511078ns
89[ 0.000018] clocksource: Switched to clocksource arch_sys_counter
90[ 0.002053] Calibrating delay loop (skipped), value calculated using timer frequency.. 38.40 BogoMIPS (lpj=192000)
91[ 0.002070] pid_max: default: 32768 minimum: 301
92[ 0.002188] Security Framework initialized
93[ 0.002201] SELinux: Initializing.
94[ 0.002262] SELinux: Starting in permissive mode
95[ 0.002305] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes)
96[ 0.002320] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes)
97[ 0.014113] ASID allocator initialised with 65536 entries
98[ 0.016200] Hierarchical SRCU implementation.
99[ 0.024603] MSM Memory Dump base table set up
100[ 0.024631] MSM Memory Dump apps data table set up
101[ 0.027171] smp: Bringing up secondary CPUs ...
102[ 0.036590] GICv3: CPU1: found redistributor 100 region 0:0x0000000017a80000
103[ 0.036641] CPU1: Booted secondary processor [51df805e]
104[ 0.046042] GICv3: CPU2: found redistributor 200 region 0:0x0000000017aa0000
105[ 0.046072] CPU2: Booted secondary processor [51df805e]
106[ 0.055491] GICv3: CPU3: found redistributor 300 region 0:0x0000000017ac0000
107[ 0.055520] CPU3: Booted secondary processor [51df805e]
108[ 0.065506] CPU features: Unsupported CPU feature variation detected.
109[ 0.065533] GICv3: CPU4: found redistributor 400 region 0:0x0000000017ae0000
110[ 0.065578] CPU4: Booted secondary processor [51df804e]
111[ 0.075359] GICv3: CPU5: found redistributor 500 region 0:0x0000000017b00000
112[ 0.075391] CPU5: Booted secondary processor [51df804e]
113[ 0.085180] GICv3: CPU6: found redistributor 600 region 0:0x0000000017b20000
114[ 0.085212] CPU6: Booted secondary processor [51df804e]
115[ 0.095498] GICv3: CPU7: found redistributor 700 region 0:0x0000000017b40000
116[ 0.095526] CPU7: Booted secondary processor [51df804e]
117[ 0.095650] smp: Brought up 1 node, 8 CPUs
118[ 0.095676] SMP: Total of 8 processors activated.
119[ 0.095681] CPU features: detected feature: GIC system register CPU interface
120[ 0.095684] CPU features: detected feature: Privileged Access Never
121[ 0.095688] CPU features: detected feature: User Access Override
122[ 0.095692] CPU features: detected feature: 32-bit EL0 Support
123[ 0.095695] CPU features: detected: Hardware dirty bit management
124[ 0.096154] CPU: All CPU(s) started at EL1
125[ 0.096193] alternatives: patching kernel code
126[ 0.097544] scm_enable_mem_protection: SCM call failed
127[ 0.097639] CPU7: update max cpu_capacity 1024
128[ 0.120058] CPU0: update max cpu_capacity 602
129[ 0.157854] Registered cp15_barrier emulation handler
130[ 0.157867] Registered setend emulation handler
131[ 0.158050] CPU4: update max cpu_capacity 1024
132[ 0.158138] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
133[ 0.158154] futex hash table entries: 2048 (order: 6, 262144 bytes)
134[ 0.161717] ramoops: msm_register_ramoops_device
135[ 0.161791] pinctrl core: initialized pinctrl subsystem
136[ 0.162205] NET: Registered protocol family 16
137[ 0.163327] schedtune: configured to support 5 boost groups
138[ 0.163542] pstore: using zlib compression
139[ 0.163941] console [pstore-1] enabled
140[ 0.163985] pstore: Registered ramoops as persistent store backend
141[ 0.163992] ramoops: attached 0x400000@0xb0000000, ecc: 0/0
142[ 0.164450] cpuidle: using governor menu
143[ 0.164468] cpuidle: using governor qcom
144[ 0.164548] NET: Registered protocol family 42
145[ 0.167896] vdso: 2 pages (1 code @ ffffff8026a08000, 1 data @ ffffff8027804000)
146[ 0.167905] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers.
147[ 0.168480] DMA: preallocated 256 KiB pool for atomic allocations
148[ 0.169027] exit: IPA_USB init success!
149[ 0.176670] unable to find DT imem DLOAD mode node
150[ 0.177489] unable to find DT imem EDLOAD mode node
151[ 0.179258] spmi spmi-0: PMIC arbiter version v5 (0x50000000)
152[ 0.179365] platform 4080000.qcom,mss: assigned reserved memory node modem_region@8e000000
153[ 0.179464] platform 17300000.qcom,lpass: assigned reserved memory node pil_adsp_region@8be00000
154[ 0.179559] platform 5c00000.qcom,ssc: assigned reserved memory node pil_slpi_region@97b00000
155[ 0.179656] platform 188101c.qcom,spss: assigned reserved memory node pil_spss_region@99000000
156[ 0.179803] msm_watchdog 17c10000.qcom,wdt: wdog absent resource not present
157[ 0.181414] msm_watchdog 17c10000.qcom,wdt: MSM Watchdog Initialized
158[ 0.181459] platform 9800000.qcom,npu: assigned reserved memory node pil_npu_region@8bd80000
159[ 0.181561] platform 8300000.qcom,turing: assigned reserved memory node cdsp_regions@99100000
160[ 0.181624] platform aae0000.qcom,venus: assigned reserved memory node pil_video_region@97600000
161[ 0.182394] sps:sps is ready.
162[ 0.182921] platform soc:qcom,msm-adsprpc-mem: assigned reserved memory node adsp_region
163[ 0.189220] platform 87900000.qseecom: assigned reserved memory node qseecom_region@0x9e400000
164[ 0.189561] platform soc:mem_dump: assigned reserved memory node mem_dump_region
165[ 0.209848] msm-dcc 10a2000.dcc_v2: DCC list passed 3
166[ 0.211182] msm-dcc 10a2000.dcc_v2: All values written to enable
167[ 0.213060] platform soc:qcom,ipa_fws: assigned reserved memory node pil_ipa_fw_region@98f00000
168[ 0.213623] platform 88a7000.msm_tspp: assigned reserved memory node qseecom_region@0x9e400000
169[ 0.213832] sm8150-pinctrl 3000000.pinctrl: invalid resource
170[ 0.223114] pm8150l_s6_level: supplied by pm8150l_s4_level
171[ 0.223234] pm8150l_s6_level_ao: supplied by pm8150l_s4_level_ao
172[ 0.227454] rpmh_regulator_probe: smpf2: could not find RPMh address for resource
173[ 0.227584] rpmh_regulator_probe: ldof2: could not find RPMh address for resource
174[ 0.227707] rpmh_regulator_probe: ldof5: could not find RPMh address for resource
175[ 0.227825] rpmh_regulator_probe: ldof6: could not find RPMh address for resource
176[ 0.249415] vServices Framework 1.0
177[ 0.252873] gpu_cx_gdsc: supplied by pm8150l_s6_level
178[ 0.253118] gpu_gx_gdsc: supplied by pm8150l_s2_level
179[ 0.254456] clk: add_opp: Set OPP pair (300000000 Hz, 612000 uv) on cpu0
180[ 0.254775] clk: add_opp: Set OPP pair (1785600000 Hz, 828000 uv) on cpu0
181[ 0.254804] clk: add_opp: Set OPP pair (300000000 Hz, 612000 uv) on cpu1
182[ 0.255110] clk: add_opp: Set OPP pair (1785600000 Hz, 828000 uv) on cpu1
183[ 0.255137] clk: add_opp: Set OPP pair (300000000 Hz, 612000 uv) on cpu2
184[ 0.255442] clk: add_opp: Set OPP pair (1785600000 Hz, 828000 uv) on cpu2
185[ 0.255470] clk: add_opp: Set OPP pair (300000000 Hz, 612000 uv) on cpu3
186[ 0.255778] clk: add_opp: Set OPP pair (1785600000 Hz, 828000 uv) on cpu3
187[ 0.255807] clk: add_opp: Set OPP pair (710400000 Hz, 756000 uv) on cpu4
188[ 0.256087] clk: add_opp: Set OPP pair (2419200000 Hz, 1000000 uv) on cpu4
189[ 0.256116] clk: add_opp: Set OPP pair (710400000 Hz, 756000 uv) on cpu5
190[ 0.256406] clk: add_opp: Set OPP pair (2419200000 Hz, 1000000 uv) on cpu5
191[ 0.256436] clk: add_opp: Set OPP pair (710400000 Hz, 756000 uv) on cpu6
192[ 0.256717] clk: add_opp: Set OPP pair (2419200000 Hz, 1000000 uv) on cpu6
193[ 0.256757] clk: add_opp: Set OPP pair (825600000 Hz, 756000 uv) on cpu7
194[ 0.257081] clk: add_opp: Set OPP pair (2841600000 Hz, 976000 uv) on cpu7
195[ 0.257263] clk: add_opp: Set OPP pair (300000000 Hz, 612000 uv) on soc:qcom,cpu0-cpu-l3-lat
196[ 0.257268] clk: add_opp: Set OPP pair (300000000 Hz, 612000 uv) on soc:qcom,cpu4-cpu-l3-lat
197[ 0.257274] clk: add_opp: Set OPP pair (300000000 Hz, 612000 uv) on soc:qcom,cdsp-cdsp-l3-lat
198[ 0.257279] clk: add_opp: Set OPP pair (300000000 Hz, 612000 uv) on soc:qcom,cpu7-cpu-l3-lat
199[ 0.258227] clk: add_opp: Set OPP pair (1612800000 Hz, 820000 uv) on soc:qcom,cpu0-cpu-l3-lat
200[ 0.258232] clk: add_opp: Set OPP pair (1612800000 Hz, 820000 uv) on soc:qcom,cpu4-cpu-l3-lat
201[ 0.258238] clk: add_opp: Set OPP pair (1612800000 Hz, 820000 uv) on soc:qcom,cdsp-cdsp-l3-lat
202[ 0.258244] clk: add_opp: Set OPP pair (1612800000 Hz, 820000 uv) on soc:qcom,cpu7-cpu-l3-lat
203[ 0.258797] sched-energy: Sched-energy-costs installed from DT
204[ 0.259079] cpufreq: driver osm-cpufreq up and running
205[ 0.259082] clk: clk_cpu_osm_driver_probe: OSM CPUFreq driver inited
206[ 0.259810] qmp-aop-clk soc:qcom,aopclk: Registered clocks with AOP
207[ 0.260083] CPU7: update max cpu_capacity 1024
208[ 0.260524] clk-rpmh soc:qcom,rpmhclk: Registered RPMh clocks
209[ 0.265441] gcc-sm8150 100000.qcom,gcc: Registered GCC clocks
210[ 0.265762] gpu_cc_gmu_clk_src: set OPP pair(19200000 Hz: 49 uV) on 2c6a000.qcom,gmu
211[ 0.265787] gpu_cc_gmu_clk_src: set OPP pair(500000000 Hz: 129 uV) on 2c6a000.qcom,gmu
212[ 0.265822] gpu_cc-sm8150 2c90000.qcom,gpucc: Registered GPU CC clocks
213[ 0.266074] AXI: msm_bus_scale_register_client(): msm_bus_scale_register_client: Bus driver not ready.
214[ 0.266075] video_cc-sm8150 ab00000.qcom,videocc: Unable to register for bw voting
215[ 0.267658] KPI: Bootloader start count = 110317
216[ 0.267660] KPI: Bootloader end count = 135256
217[ 0.267662] KPI: Bootloader display count = 238319964
218[ 0.267664] KPI: Bootloader load kernel count = 310457698
219[ 0.267668] KPI: Kernel MPM timestamp = 150559
220[ 0.267670] KPI: Kernel MPM Clock frequency = 32768
221[ 0.267676] socinfo_print: v0.15, id=339, ver=2.2, raw_id=165, raw_ver=3, hw_plat=37, hw_plat_ver=1638400
222[ 0.267676] accessory_chip=0, hw_plat_subtype=0, pmic_model=65566, pmic_die_revision=196608 foundry_id=1 serial_number=3961165061 num_pmics=3 chip_family=0x56 raw_device_family=0x6 raw_device_number=0x3 nproduct_id=0x404 num_clusters=0x1 ncluster_array_offset=0xb0 num_defective_parts=0xc ndefective_parts_array_offset=0xb4 nmodem_supported=0xff
223[ 0.267748] Minidump: Enabled with max number of regions 200
224[ 0.267793] msm_bus_fabric_rpmh_init_driver
225[ 0.267854] msm_bus: Probe started
226[ 0.268086] msm_bus_device 16e0000.ad-hoc-bus: Bus type is missing
227[ 0.268108] msm_bus_device 16e0000.ad-hoc-bus: Bus type is missing
228[ 0.268113] msm_bus_device 16e0000.ad-hoc-bus: Bus type is missing
229[ 0.268129] msm_bus_device 16e0000.ad-hoc-bus: Bus type is missing
230[ 0.268700] msm_bus: DT Parsing complete
231[ 0.271091] msm_bus_fab_init_noc_ops: Invalid Bus type
232[ 0.271146] msm_bus_fab_init_noc_ops: Invalid Bus type
233[ 0.271160] msm_bus_fab_init_noc_ops: Invalid Bus type
234[ 0.271205] msm_bus_fab_init_noc_ops: Invalid Bus type
235[ 0.283236] Built 1 zonelists, mobility grouping on. Total pages: 1263828
236[ 0.289683] mem-offline: Added memory blocks ranging from mem14 - mem15
237[ 0.289957] reg-fixed-voltage soc:ext_5v_boost: could not find pctldev for node /soc/qcom,spmi@c440000/qcom,pm8150b@2/pinctrl@c000/otg_vbus_boost/otg_vbus_boost_default, deferring probe
238[ 0.290003] camera_viodd_ldo: supplied by pm8150_s4
239[ 0.290180] actuator_rear_regulator: supplied by pm8150l_bob
240[ 0.290237] actuator_rear_aux_ldo: supplied by pm8150l_bob
241[ 0.290295] actuator_ultra_ldo: supplied by pm8150l_bob
242[ 0.295150] register_client_adhoc:find path.src 161 dest 627
243[ 0.295216] register_client_adhoc:Client handle 1 apps_smmu
244[ 0.295335] arm-smmu 15000000.apps-smmu: non-coherent table walk
245[ 0.295340] arm-smmu 15000000.apps-smmu: (IDR0.CTTW overridden by FW configuration)
246[ 0.295344] arm-smmu 15000000.apps-smmu: stream matching with 94 register groups
247[ 0.296242] register_client_adhoc:find path.src 161 dest 627
248[ 0.296292] register_client_adhoc:Client handle 2 apps_smmu
249[ 0.296364] register_client_adhoc:find path.src 161 dest 627
250[ 0.296405] register_client_adhoc:Client handle 3 apps_smmu
251[ 0.296464] register_client_adhoc:find path.src 22 dest 773
252[ 0.296490] register_client_adhoc:Client handle 4 mnoc_hf_1_tbu
253[ 0.296531] register_client_adhoc:find path.src 154 dest 10070
254[ 0.296548] register_client_adhoc:Client handle 5 apps_smmu
255[ 0.296599] register_client_adhoc:find path.src 22 dest 773
256[ 0.296620] register_client_adhoc:Client handle 6 mnoc_hf_0_tbu
257[ 0.296657] register_client_adhoc:find path.src 154 dest 10070
258[ 0.296673] register_client_adhoc:Client handle 7 apps_smmu
259[ 0.296721] register_client_adhoc:find path.src 161 dest 627
260[ 0.296766] register_client_adhoc:Client handle 8 apps_smmu
261[ 0.296835] register_client_adhoc:find path.src 161 dest 627
262[ 0.296877] register_client_adhoc:Client handle 9 apps_smmu
263[ 0.296928] register_client_adhoc:find path.src 137 dest 772
264[ 0.296951] register_client_adhoc:Client handle 10 mnoc_sf_0_tbu
265[ 0.297581] arm-smmu 2ca0000.kgsl-smmu: non-coherent table walk
266[ 0.297586] arm-smmu 2ca0000.kgsl-smmu: (IDR0.CTTW overridden by FW configuration)
267[ 0.297589] arm-smmu 2ca0000.kgsl-smmu: stream matching with 6 register groups
268[ 0.298136] vgaarb: loaded
269[ 0.298247] SCSI subsystem initialized
270[ 0.298284] usbcore: registered new interface driver usbfs
271[ 0.298292] usbcore: registered new interface driver hub
272[ 0.298360] usbcore: registered new device driver usb
273[ 0.298543] usb_phy_generic soc:usb_nop_phy: soc:usb_nop_phy supply vcc not found, using dummy regulator
274[ 0.298706] xiaomi_touch_probe enter
275[ 0.298708] xiaomi_touch_parse_dt touch,name:xiaomi-touch
276[ 0.298731] xiaomi_touch_probe over
277[ 0.298835] media: Linux media interface: v0.10
278[ 0.298841] Linux video capture interface: v2.00
279[ 0.300913] virt zone: sensor[gpuss-1-usr] read error:-22
280[ 0.300918] thermal thermal_zone32: failed to read out thermal zone (-22)
281[ 0.302026] EDAC MC: Ver: 3.0.0
282[ 0.302755] platform soc:qcom,ion:qcom,ion-heap@22: assigned reserved memory node adsp_region
283[ 0.302778] platform soc:qcom,ion:qcom,ion-heap@27: assigned reserved memory node qseecom_region@0x9e400000
284[ 0.302800] platform soc:qcom,ion:qcom,ion-heap@19: assigned reserved memory node qseecom_ta_region
285[ 0.302819] platform soc:qcom,ion:qcom,ion-heap@13: assigned reserved memory node sp_region
286[ 0.302840] platform soc:qcom,ion:qcom,ion-heap@10: assigned reserved memory node secure_display_region
287[ 0.302924] ION heap system created
288[ 0.303011] ION heap adsp created at 0x00000000f0c00000 with size 1000000
289[ 0.303018] ION heap qsecom created at 0x000000009e400000 with size 1400000
290[ 0.303023] ION heap qsecom_ta created at 0x00000000f2400000 with size 1000000
291[ 0.303030] ION heap spss created at 0x00000000f1c00000 with size 800000
292[ 0.303042] ION heap secure_display created at 0x00000000f5c00000 with size a000000
293[ 0.320390] platform soc:qcom,ion:qcom,ion-heap@14: ion_secure_carveout: creating heap@0xa4c00000, size 0x3c00000
294[ 0.320393] ION heap secure_carveout created
295[ 0.320403] ION heap secure_heap created
296[ 0.320982] iommu: Adding device 8c0000.qcom,qupv3_0_geni_se:qcom,iommu_qupv3_0_geni_se_cb to group 0
297[ 0.321112] iommu: Adding device ac0000.qcom,qupv3_1_geni_se:qcom,iommu_qupv3_1_geni_se_cb to group 1
298[ 0.321237] iommu: Adding device cc0000.qcom,qupv3_2_geni_se:qcom,iommu_qupv3_2_geni_se_cb to group 2
299[ 0.321363] iommu: Adding device 26c0000.qcom,qupv3_3_geni_se:qcom,iommu_qupv3_3_geni_se_cb to group 3
300[ 0.321761] register_client_adhoc:find path.src 90 dest 512
301[ 0.321879] register_client_adhoc:find path.src 90 dest 585
302[ 0.321919] register_client_adhoc:find path.src 1 dest 676
303[ 0.321987] register_client_adhoc:find path.src 143 dest 777
304[ 0.322009] register_client_adhoc:Client handle 11 ipa
305[ 0.323126] ipa ipa3_smp2p_probe:6659 fail to get smp2p clk resp bit -517
306[ 0.323375] iommu: Adding device soc:ipa_smmu_ap to group 4
307[ 0.323496] iommu: Adding device soc:ipa_smmu_wlan to group 5
308[ 0.323619] iommu: Adding device soc:ipa_smmu_uc to group 6
309[ 0.323937] ipa ipa3_smp2p_probe:6659 fail to get smp2p clk resp bit -517
310[ 0.324674] trusty soc:trusty: trusty_probe_early: done
311[ 0.324682] trusty soc:trusty: using default smc ...
312[ 0.324983] trusty soc:trusty: failed to get version: -1
313[ 0.325052] trusty soc:trusty: selected api version: 0 (requested 3)
314[ 0.325061] trusty soc:trusty: shm not available, fallback to default alloc/free
315[ 0.325269] trusty soc:trusty: late_init_work_func: done
316[ 0.325472] Advanced Linux Sound Architecture Driver Initialized.
317[ 0.325831] Bluetooth: Core ver 2.22
318[ 0.325862] NET: Registered protocol family 31
319[ 0.325867] Bluetooth: HCI device and connection manager initialized
320[ 0.325879] Bluetooth: HCI socket layer initialized
321[ 0.325888] Bluetooth: L2CAP socket layer initialized
322[ 0.325909] Bluetooth: SCO socket layer initialized
323[ 0.326138] NetLabel: Initializing
324[ 0.326143] NetLabel: domain hash size = 128
325[ 0.326148] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO
326[ 0.326190] NetLabel: unlabeled traffic allowed by default
327[ 0.326246] pcie:pcie_init.
328[ 0.329077] pci-msm 1c00000.qcom,pcie: 1c00000.qcom,pcie supply vreg-3.3 not found, using dummy regulator
329[ 0.329273] pci-msm 1c00000.qcom,pcie: 1c00000.qcom,pcie supply gdsc-smmu not found, using dummy regulator
330[ 0.329315] msm_pcie_get_resources: Could not get required GPIO perst-gpio
331[ 0.329328] msm_pcie_probe: PCIe: Driver probe failed for RC0:-2
332[ 0.329440] pci-msm: probe of 1c00000.qcom,pcie failed with error -2
333[ 0.331476] pci-msm 1c08000.qcom,pcie: prop pinctrl-0 index 2 invalid phandle
334[ 0.331497] pci-msm: probe of 1c08000.qcom,pcie failed with error -22
335[ 0.332286] register_client_adhoc:find path.src 1 dest 590
336[ 0.332528] register_client_adhoc:find path.src 1 dest 589
337[ 0.332595] register_client_adhoc:find path.src 1 dest 596
338[ 0.332673] register_client_adhoc:Client handle 12 bus-proxy-client
339[ 0.333716] sched-energy energy-costs: cpu=0 eff=1024 [freq=300000 cap=64 power_d0=24] -> [freq=1785600 cap=379 power_d0=128]
340[ 0.333730] sched-energy energy-costs: cpu=1 eff=1024 [freq=300000 cap=64 power_d0=24] -> [freq=1785600 cap=379 power_d0=128]
341[ 0.333739] sched-energy energy-costs: cpu=2 eff=1024 [freq=300000 cap=64 power_d0=24] -> [freq=1785600 cap=379 power_d0=128]
342[ 0.333747] sched-energy energy-costs: cpu=3 eff=1024 [freq=300000 cap=64 power_d0=24] -> [freq=1785600 cap=379 power_d0=128]
343[ 0.333757] sched-energy energy-costs: cpu=4 eff=1740 [freq=710400 cap=257 power_d0=165] -> [freq=2419200 cap=872 power_d0=1022]
344[ 0.333765] sched-energy energy-costs: cpu=5 eff=1740 [freq=710400 cap=257 power_d0=165] -> [freq=2419200 cap=872 power_d0=1022]
345[ 0.333775] sched-energy energy-costs: cpu=6 eff=1740 [freq=710400 cap=257 power_d0=165] -> [freq=2419200 cap=872 power_d0=1022]
346[ 0.333783] sched-energy energy-costs: cpu=7 eff=1740 [freq=825600 cap=298 power_d0=227] -> [freq=2841600 cap=1024 power_d0=1427]
347[ 0.333790] sched-energy energy-costs: Sched-energy-costs capacity updated
348[ 0.334141] register_client_adhoc:find path.src 1 dest 589
349[ 0.334241] register_client_adhoc:Client handle 13 bps_gdsc_ahb
350[ 0.334515] bps_gdsc: supplied by pm8150l_s5_level
351[ 0.334931] register_client_adhoc:find path.src 1 dest 589
352[ 0.334991] register_client_adhoc:Client handle 14 ipe_0_gdsc_ahb
353[ 0.335231] ipe_0_gdsc: supplied by pm8150l_s5_level
354[ 0.335435] register_client_adhoc:find path.src 1 dest 589
355[ 0.335510] register_client_adhoc:Client handle 15 ipe_1_gdsc_ahb
356[ 0.335736] ipe_1_gdsc: supplied by pm8150l_s5_level
357[ 0.335937] register_client_adhoc:find path.src 1 dest 589
358[ 0.336006] register_client_adhoc:Client handle 16 ife_0_gdsc_ahb
359[ 0.336230] ife_0_gdsc: supplied by pm8150l_s5_level
360[ 0.336447] register_client_adhoc:find path.src 1 dest 589
361[ 0.336505] register_client_adhoc:Client handle 17 ife_1_gdsc_ahb
362[ 0.336727] ife_1_gdsc: supplied by pm8150l_s5_level
363[ 0.336899] register_client_adhoc:find path.src 1 dest 589
364[ 0.336964] register_client_adhoc:Client handle 18 titan_top_gdsc_ahb
365[ 0.337184] titan_top_gdsc: supplied by pm8150l_s5_level
366[ 0.337359] register_client_adhoc:find path.src 1 dest 590
367[ 0.337425] register_client_adhoc:Client handle 19 mdss_core_gdsc_ahb
368[ 0.337556] mdss_core_gdsc: supplied by pm8150l_s5_level
369[ 0.337815] register_client_adhoc:find path.src 1 dest 596
370[ 0.337877] register_client_adhoc:Client handle 20 mvsc_gdsc_ahb
371[ 0.338120] mvsc_gdsc: supplied by pm8150l_s5_level
372[ 0.338315] register_client_adhoc:find path.src 1 dest 596
373[ 0.338379] register_client_adhoc:Client handle 21 mvs0_gdsc_ahb
374[ 0.338599] mvs0_gdsc: supplied by pm8150l_s5_level
375[ 0.338772] register_client_adhoc:find path.src 1 dest 596
376[ 0.338836] register_client_adhoc:Client handle 22 mvs1_gdsc_ahb
377[ 0.339058] mvs1_gdsc: supplied by pm8150l_s5_level
378[ 0.339562] register_client_adhoc:find path.src 1 dest 589
379[ 0.339626] register_client_adhoc:Client handle 23 clk_camcc_debugfs
380[ 0.340285] cam_cc_bps_clk_src: set OPP pair(19200000 Hz: 49 uV) on ac6f000.qcom,bps
381[ 0.340416] cam_cc_bps_clk_src: set OPP pair(600000000 Hz: 257 uV) on ac6f000.qcom,bps
382[ 0.340542] cam_cc_cci_0_clk_src: set OPP pair(19200000 Hz: 49 uV) on ac4a000.qcom,cci
383[ 0.340605] cam_cc_cci_0_clk_src: set OPP pair(37500000 Hz: 65 uV) on ac4a000.qcom,cci
384[ 0.340683] cam_cc_cci_1_clk_src: set OPP pair(19200000 Hz: 49 uV) on ac4b000.qcom,cci
385[ 0.340708] cam_cc_cci_1_clk_src: set OPP pair(37500000 Hz: 65 uV) on ac4b000.qcom,cci
386[ 0.340843] cam_cc_csi0phytimer_clk_src: set OPP pair(19200000 Hz: 49 uV) on ac65000.qcom,csiphy
387[ 0.340886] cam_cc_csi0phytimer_clk_src: set OPP pair(300000000 Hz: 65 uV) on ac65000.qcom,csiphy
388[ 0.340964] cam_cc_csi1phytimer_clk_src: set OPP pair(19200000 Hz: 49 uV) on ac66000.qcom,csiphy
389[ 0.340990] cam_cc_csi1phytimer_clk_src: set OPP pair(300000000 Hz: 65 uV) on ac66000.qcom,csiphy
390[ 0.341091] cam_cc_csi2phytimer_clk_src: set OPP pair(19200000 Hz: 49 uV) on ac67000.qcom,csiphy
391[ 0.341117] cam_cc_csi2phytimer_clk_src: set OPP pair(300000000 Hz: 65 uV) on ac67000.qcom,csiphy
392[ 0.341197] cam_cc_csi3phytimer_clk_src: set OPP pair(19200000 Hz: 49 uV) on ac68000.qcom,csiphy
393[ 0.341219] cam_cc_csi3phytimer_clk_src: set OPP pair(300000000 Hz: 65 uV) on ac68000.qcom,csiphy
394[ 0.341513] cam_cc_icp_clk_src: set OPP pair(19200000 Hz: 49 uV) on ac00000.qcom,a5
395[ 0.341554] cam_cc_icp_clk_src: set OPP pair(600000000 Hz: 193 uV) on ac00000.qcom,a5
396[ 0.341685] cam_cc_ife_0_clk_src: set OPP pair(19200000 Hz: 49 uV) on acaf000.qcom,vfe0
397[ 0.341815] cam_cc_ife_0_clk_src: set OPP pair(950000000 Hz: 385 uV) on acaf000.qcom,vfe0
398[ 0.341920] cam_cc_ife_0_csid_clk_src: set OPP pair(19200000 Hz: 49 uV) on acb3000.qcom,csid0
399[ 0.342035] cam_cc_ife_0_csid_clk_src: set OPP pair(600000000 Hz: 257 uV) on acb3000.qcom,csid0
400[ 0.342193] cam_cc_ife_1_clk_src: set OPP pair(19200000 Hz: 49 uV) on acb6000.qcom,vfe1
401[ 0.342331] cam_cc_ife_1_clk_src: set OPP pair(950000000 Hz: 385 uV) on acb6000.qcom,vfe1
402[ 0.342430] cam_cc_ife_1_csid_clk_src: set OPP pair(19200000 Hz: 49 uV) on acba000.qcom,csid1
403[ 0.342547] cam_cc_ife_1_csid_clk_src: set OPP pair(600000000 Hz: 257 uV) on acba000.qcom,csid1
404[ 0.342668] cam_cc_ife_lite_0_clk_src: set OPP pair(19200000 Hz: 49 uV) on acc4000.qcom,vfe-lite0
405[ 0.342798] cam_cc_ife_lite_0_clk_src: set OPP pair(600000000 Hz: 257 uV) on acc4000.qcom,vfe-lite0
406[ 0.342900] cam_cc_ife_lite_0_csid_clk_src: set OPP pair(19200000 Hz: 49 uV) on acc8000.qcom,csid-lite0
407[ 0.342988] cam_cc_ife_lite_0_csid_clk_src: set OPP pair(600000000 Hz: 257 uV) on acc8000.qcom,csid-lite0
408[ 0.343069] cam_cc_ife_lite_1_clk_src: set OPP pair(19200000 Hz: 49 uV) on accb000.qcom,vfe-lite1
409[ 0.343182] cam_cc_ife_lite_1_clk_src: set OPP pair(600000000 Hz: 257 uV) on accb000.qcom,vfe-lite1
410[ 0.343313] cam_cc_ife_lite_1_csid_clk_src: set OPP pair(19200000 Hz: 49 uV) on accf000.qcom,csid-lite1
411[ 0.343372] cam_cc_ife_lite_1_csid_clk_src: set OPP pair(600000000 Hz: 257 uV) on accf000.qcom,csid-lite1
412[ 0.343558] cam_cc_ipe_0_clk_src: set OPP pair(19200000 Hz: 49 uV) on ac87000.qcom,ipe0
413[ 0.343666] cam_cc_ipe_0_clk_src: set OPP pair(600000000 Hz: 257 uV) on ac87000.qcom,ipe0
414[ 0.344738] cam_cc-sm8150 ad00000.qcom,camcc: Registered CAM CC clocks
415[ 0.344982] register_client_adhoc:find path.src 1 dest 590
416[ 0.345064] register_client_adhoc:Client handle 24 clk_dispcc_debugfs
417[ 0.345086] PLL is already enabled. Skipping configuration.
418[ 0.347182] disp_cc-sm8150 af00000.qcom,dispcc: Registered Display CC clocks
419[ 0.349002] npu_cc-sm8150 9910000.qcom,npucc: Registered NPU CC clocks
420[ 0.349100] register_client_adhoc:find path.src 1 dest 596
421[ 0.349176] register_client_adhoc:Client handle 25 clk_videocc_debugfs
422[ 0.349500] video_cc-sm8150 ab00000.qcom,videocc: Registered Video CC clocks
423[ 0.349566] reg-fixed-voltage soc:ext_5v_boost: could not find pctldev for node /soc/qcom,spmi@c440000/qcom,pm8150b@2/pinctrl@c000/otg_vbus_boost/otg_vbus_boost_default, deferring probe
424[ 0.349738] ipa ipa3_smp2p_probe:6659 fail to get smp2p clk resp bit -517
425[ 0.350223] clocksource: Switched to clocksource arch_sys_counter
426[ 0.379019] VFS: Disk quotas dquot_6.6.0
427[ 0.379118] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
428[ 0.380221] register_client_adhoc:find path.src 1 dest 589
429[ 0.380431] register_client_adhoc:find path.src 1 dest 596
430[ 0.380510] register_client_adhoc:find path.src 1 dest 590
431[ 0.380591] register_client_adhoc:Client handle 26 clk_measure
432[ 0.381857] mdss_pll_probe: MDSS pll label = MDSS DSI 0 PLL
433[ 0.381868] mdss_pll_probe: mdss_pll_probe: label=MDSS DSI 0 PLL PLL SSC enabled
434[ 0.382118] mdss_pll ae94900.qcom,mdss_dsi_pll: Failed to create debugfs directory
435[ 0.382127] mdss_pll ae94900.qcom,mdss_dsi_pll: Failed to create debugfs directory
436[ 0.382135] mdss_pll ae94900.qcom,mdss_dsi_pll: Failed to create debugfs directory
437[ 0.382144] mdss_pll ae94900.qcom,mdss_dsi_pll: Failed to create debugfs directory
438[ 0.382152] mdss_pll ae94900.qcom,mdss_dsi_pll: Failed to create debugfs directory
439[ 0.382743] dsi_pll_clock_register_7nm: Registered DSI PLL ndx=0, clocks successfully
440[ 0.382774] mdss_pll_probe: MDSS pll label = MDSS DSI 1 PLL
441[ 0.382779] mdss_pll_probe: mdss_pll_probe: label=MDSS DSI 1 PLL PLL SSC enabled
442[ 0.382832] mdss_pll ae96900.qcom,mdss_dsi_pll: Failed to create debugfs directory
443[ 0.382839] mdss_pll ae96900.qcom,mdss_dsi_pll: Failed to create debugfs directory
444[ 0.382848] mdss_pll ae96900.qcom,mdss_dsi_pll: Failed to create debugfs directory
445[ 0.382857] mdss_pll ae96900.qcom,mdss_dsi_pll: Failed to create debugfs directory
446[ 0.382865] mdss_pll ae96900.qcom,mdss_dsi_pll: Failed to create debugfs directory
447[ 0.388234] dsi_pll_clock_register_7nm: Registered DSI PLL ndx=1, clocks successfully
448[ 0.388257] mdss_pll_probe: MDSS pll label = MDSS DP PLL
449[ 0.388265] mdss_pll_util_parse_dt_supply: no supply entry present
450[ 0.391597] NET: Registered protocol family 2
451[ 0.391996] TCP established hash table entries: 65536 (order: 7, 524288 bytes)
452[ 0.392225] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
453[ 0.393210] TCP: Hash tables configured (established 65536 bind 65536)
454[ 0.393389] UDP hash table entries: 4096 (order: 5, 131072 bytes)
455[ 0.393444] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes)
456[ 0.393634] NET: Registered protocol family 1
457[ 0.393664] PCI: CLS 0 bytes, default 128
458[ 0.393861] reg-fixed-voltage soc:ext_5v_boost: could not find pctldev for node /soc/qcom,spmi@c440000/qcom,pm8150b@2/pinctrl@c000/otg_vbus_boost/otg_vbus_boost_default, deferring probe
459[ 0.394073] ipa ipa3_smp2p_probe:6659 fail to get smp2p clk resp bit -517
460[ 0.394341] Trying to unpack rootfs image as initramfs...
461[ 0.656686] Freeing initrd memory: 16700K
462[ 0.658977] hw perfevents: enabled with armv8_pmuv3 PMU driver, 7 counters available
463[ 0.665002] audit: initializing netlink subsys (disabled)
464[ 0.665185] audit: type=2000 audit(0.659:1): state=initialized audit_enabled=0 res=1
465[ 0.665380] Initialise system trusted keyrings
466[ 0.665496] workingset: timestamp_bits=46 max_order=21 bucket_order=0
467[ 0.667270] Registering sdcardfs 0.1
468[ 0.667360] fuse init (API version 7.26)
469[ 0.667526] SELinux: Registering netfilter hooks
470[ 0.667852] pfk_ext4 [pfk_ext4_init]: PFK EXT4 inited successfully
471[ 0.667859] pfk_f2fs [pfk_f2fs_init]: PFK F2FS inited successfully
472[ 0.667868] pfk [pfk_init]: Driver initialized successfully
473[ 0.671670] Key type asymmetric registered
474[ 0.671678] Asymmetric key parser 'x509' registered
475[ 0.671732] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 240)
476[ 0.671740] io scheduler noop registered
477[ 0.671746] io scheduler deadline registered
478[ 0.671812] io scheduler cfq registered (default)
479[ 0.671817] io scheduler mq-deadline registered
480[ 0.671823] io scheduler kyber registered
481[ 0.674338] Virtual Services transport driver for OKL4 Axons
482[ 0.676060] iommu: Adding device 800000.qcom,gpi-dma to group 7
483[ 0.678015] iommu: Adding device a00000.qcom,gpi-dma to group 8
484[ 0.679474] iommu: Adding device c00000.qcom,gpi-dma to group 9
485[ 0.683422] iommu: Adding device 18800000.qcom,icnss to group 10
486[ 0.698247] icnss 18800000.qcom,icnss: for wcss_msa0 segments only will be dumped.
487[ 0.698481] icnss: Platform driver probed successfully
488[ 0.700700] memshare_child soc:qcom,memshare:qcom,client_1: for memshare_GPS segments only will be dumped.
489[ 0.700736] memshare_child soc:qcom,memshare:qcom,client_2: for memshare_FTM segments only will be dumped.
490[ 0.708742] memshare_child soc:qcom,memshare:qcom,client_3: for memshare_DIAG segments only will be dumped.
491[ 0.709190] register_client_adhoc:find path.src 125 dest 512
492[ 0.709476] register_client_adhoc:Client handle 27 scm_pas
493[ 0.709489] minidump-id not found for modem
494[ 0.709961] minidump-id not found for adsp
495[ 0.710309] minidump-id not found for slpi
496[ 0.710583] minidump-id not found for spss
497[ 0.710806] minidump-id not found for npu
498[ 0.710813] subsys-pil-tz 9800000.qcom,npu: for npu segments only will be dumped.
499[ 0.710938] register_client_adhoc:find path.src 154 dest 10070
500[ 0.710969] register_client_adhoc:Client handle 28 pil-cdsp
501[ 0.710975] minidump-id not found for cdsp
502[ 0.711491] register_client_adhoc:find path.src 63 dest 512
503[ 0.711582] register_client_adhoc:Client handle 29 pil-venus
504[ 0.711590] minidump-id not found for venus
505[ 0.711720] minidump-id not found for ipa_fws
506[ 0.711726] subsys-pil-tz soc:qcom,ipa_fws: for ipa_fws segments only will be dumped.
507[ 0.711903] minidump-id not found for a640_zap
508[ 0.711908] subsys-pil-tz soc:qcom,kgsl-hyp: for a640_zap segments only will be dumped.
509[ 0.712022] spcom: spcom_init: spcom driver version 2.1 23-April-2018.
510[ 0.713962] smp2p_sleepstate soc:qcom,smp2p_sleepstate: got smp2p-sleepstate-in irq 485
511[ 0.715658] msm_geni_serial c8c000.qcom,qup_uart: Wakeup byte 0xfd
512[ 0.715751] msm_geni_serial c8c000.qcom,qup_uart: Serial port0 added.FifoSize 64 is_console0
513[ 0.715929] c8c000.qcom,qup_uart: ttyHS0 at MMIO 0xc8c000 (irq = 442, base_baud = 0) is a MSM
514[ 0.716046] msm_geni_serial_init: Driver initialized
515[ 0.716735] register_client_adhoc:find path.src 1 dest 618
516[ 0.716850] register_client_adhoc:Client handle 30 msm-rng-noc
517[ 0.719090] random: crng init done
518[ 0.724768] iommu: Adding device soc:kgsl_iommu_test_device to group 11
519[ 0.724864] iommu: Adding device soc:kgsl_iommu_coherent_test_device to group 12
520[ 0.724916] iommu: Adding device soc:apps_iommu_test_device to group 13
521[ 0.724941] iommu: Adding device soc:apps_iommu_coherent_test_device to group 14
522[ 0.726535] register_client_adhoc:find path.src 20003 dest 20515
523[ 0.726672] register_client_adhoc:find path.src 20004 dest 20515
524[ 0.726709] register_client_adhoc:Client handle 31 disp_rsc_mnoc
525[ 0.726726] register_client_adhoc:find path.src 20001 dest 20513
526[ 0.726763] register_client_adhoc:Client handle 32 disp_rsc_llcc
527[ 0.726775] register_client_adhoc:find path.src 20000 dest 20512
528[ 0.726809] register_client_adhoc:Client handle 33 disp_rsc_ebi
529[ 0.727175] [sde_rsc_hw:rsc_hw_init:781]: sde rsc init successfully done
530[ 0.727217] [sde_rsc:sde_rsc_probe:1450]: sde rsc index:0 probed successfully
531[ 0.727618] dsi_phy ae94400.qcom,mdss_dsi_phy0: ae94400.qcom,mdss_dsi_phy0 supply gdsc not found, using dummy regulator
532[ 0.727689] msm-dsi-phy:[dsi_phy_driver_probe] Probe successful for dsi-phy-0
533[ 0.727721] dsi_phy ae96400.qcom,mdss_dsi_phy0: ae96400.qcom,mdss_dsi_phy0 supply gdsc not found, using dummy regulator
534[ 0.727756] msm-dsi-phy:[dsi_phy_driver_probe] Probe successful for dsi-phy-1
535[ 0.728101] AXI: get_pdata(): Error: Client name not found
536[ 0.728106] AXI: msm_bus_cl_get_pdata(): client has to provide missing entry for successful registration
537[ 0.728111] dsi-ctrl:[dsi_ctrl_dev_probe] Probe successful for dsi-ctrl-0
538[ 0.728216] AXI: get_pdata(): Error: Client name not found
539[ 0.728220] AXI: msm_bus_cl_get_pdata(): client has to provide missing entry for successful registration
540[ 0.728225] dsi-ctrl:[dsi_ctrl_dev_probe] Probe successful for dsi-ctrl-1
541[ 0.728648] OF: graph: no port node found in /soc/qcom,dsi-display-primary
542[ 0.728670] msm-dsi-panel:[dsi_panel_get:3399] [LCD]dsi_panel_get:3399 Dispparam enabled.
543[ 0.728702] msm-dsi-panel:[dsi_panel_parse_qsync_caps:1249] [samsung ea8076 fhd cmd dsi panel] qsync min fps not defined rc:-22
544[ 0.728707] msm-dsi-panel:[dsi_panel_get:3426] failed to parse qsync features, rc=-22
545[ 0.728724] msm-dsi-panel:[dsi_panel_parse_reset_sequence:1949] RESET SEQ LENGTH = 16
546[ 0.728746] msm-dsi-panel:[dsi_panel_parse_misc_features:1999] dsi_panel_parse_misc_features: ulps feature enabled
547[ 0.728753] msm-dsi-panel:[dsi_panel_parse_misc_features:2005] dsi_panel_parse_misc_features: ulps during suspend feature disabled
548[ 0.728798] msm-dsi-panel:[dsi_panel_parse_mi_config:3318] [LCD]dsi_panel_parse_mi_config:3318 Dispparam enabled.
549[ 0.728809] msm-dsi-panel:[dsi_panel_parse_mi_config:3332] Panel on dimming delay 200 ms
550[ 0.728816] msm-dsi-panel:[dsi_panel_parse_mi_config:3343] doze backlight threshold 8
551[ 0.728821] msm-dsi-panel:[dsi_panel_parse_mi_config:3352] fod_off_dimming_delay 85
552[ 0.728851] msm-dsi-panel:[dsi_panel_parse_elvss_dimming_config:3031] elvss dimming check enable
553[ 0.729228] iommu: Adding device ae00000.qcom,mdss_mdp to group 15
554[ 0.731201] iommu: Adding device 2c6a000.qcom,gmu:gmu_user to group 16
555[ 0.731809] iommu: Adding device 2c6a000.qcom,gmu:gmu_kernel to group 17
556[ 0.733266] register_client_adhoc:find path.src 26 dest 512
557[ 0.733409] register_client_adhoc:Client handle 34 grp3d
558[ 0.733418] register_client_adhoc:find path.src 26 dest 10036
559[ 0.733481] register_client_adhoc:Client handle 35 cnoc
560[ 0.733489] query_client_usecase_all: query_start
561[ 0.733521] query_client_usecase_all: query_start
562[ 0.734353] iommu: Adding device 2ca0000.qcom,kgsl-iommu:gfx3d_user to group 18
563[ 0.734436] iommu: Adding device 2ca0000.qcom,kgsl-iommu:gfx3d_secure to group 19
564[ 0.825093] brd: module loaded
565[ 0.828307] loop: module loaded
566[ 0.828418] zram: Added device: zram0
567[ 0.830467] QSEECOM: qseecom_probe: qseecom.qsee_version = 0x1400000
568[ 0.830487] QSEECOM: qseecom_retrieve_ce_data: Device does not support PFE
569[ 0.830492] QSEECOM: qseecom_probe: no-clock-support=0x1
570[ 0.830498] QSEECOM: qseecom_probe: qseecom.qsee_reentrancy_support = 2
571[ 0.830612] QSEECOM: qseecom_probe: qseecom.whitelist_support = 1
572[ 0.832212] qcom,qpnp-power-on c440000.qcom,spmi:qcom,pm8150@0:qcom,power-on@800: PMIC@SID0 Power-on reason: Triggered from KPD (Power Key Press) and 'cold' boot
573[ 0.832243] qcom,qpnp-power-on c440000.qcom,spmi:qcom,pm8150@0:qcom,power-on@800: PMIC@SID0: Power-off reason: Triggered from PS_HOLD (PS_HOLD/MSM Controlled Shutdown)
574[ 0.832385] input: qpnp_pon as /devices/platform/soc/c440000.qcom,spmi/spmi-0/spmi0-00/c440000.qcom,spmi:qcom,pm8150@0:qcom,power-on@800/input/input0
575[ 0.833333] 0x8c0:0x80 0x8c1:0x0 0x8c2:0x0 0x8c3:0x0 0x8c4:0x80 0x8c5:0x2 0x8c6:0x0 0x8c7:0x80 0x8c8:0x0 0x8c9:0x0 0x8ca:0x0 0x8cb:0x0 0x842:0x7 0x84a:0x1 0x85a:0x7
576[ 0.834793] SDAM base=0xb100 size=128 registered successfully
577[ 0.835181] PMIC@SID2: PM8150B v2.0 options: 0, 0, 0, 0
578[ 0.835269] qcom,qpnp-power-on c440000.qcom,spmi:qcom,pm8150b@2:qcom,power-on@800: PMIC@SID2 Power-on reason: Triggered from CBL (External Power Supply) and 'cold' boot
579[ 0.835296] qcom,qpnp-power-on c440000.qcom,spmi:qcom,pm8150b@2:qcom,power-on@800: PMIC@SID2: Power-off reason: Triggered from SOFT (Software)
580[ 0.835455] 0x8c0:0x40 0x8c1:0x0 0x8c2:0x0 0x8c3:0x0 0x8c4:0x80 0x8c5:0x1 0x8c6:0x0 0x8c7:0x80 0x8c8:0x0 0x8c9:0x0 0x8ca:0x0 0x8cb:0x0
581[ 0.837832] PMIC@SID4: PM8150A v2.0 options: 0, 0, 0, 0
582[ 0.837918] qcom,qpnp-power-on c440000.qcom,spmi:qcom,pm8150l@4:qcom,power-on@800: PMIC@SID4 Power-on reason: Triggered from PON1 (Secondary PMIC) and 'cold' boot
583[ 0.837946] qcom,qpnp-power-on c440000.qcom,spmi:qcom,pm8150l@4:qcom,power-on@800: PMIC@SID4: Power-off reason: Triggered from SOFT (Software)
584[ 0.838102] 0x8c0:0x20 0x8c1:0x0 0x8c2:0x0 0x8c3:0x0 0x8c4:0x80 0x8c5:0x1 0x8c6:0x0 0x8c7:0x80 0x8c8:0x0 0x8c9:0x0 0x8ca:0x0 0x8cb:0x0
585[ 0.840834] LCDB: qpnp_lcdb_regulator_probe: LCDB module successfully registered! lcdb_en=0 ldo_voltage=4000mV ncp_voltage=4000mV bst_voltage=4700mV
586[ 0.842812] iommu: Adding device 1de0000.qcedev to group 20
587[ 0.842955] register_client_adhoc:find path.src 125 dest 512
588[ 0.843213] register_client_adhoc:Client handle 36 qcedev-noc
589[ 0.843531] QCE50: __qce_get_device_tree_data: CE operating frequency is not defined, setting to default 100MHZ
590[ 0.845106] qce 1de0000.qcedev: QTI Crypto 5.4.2 device found @0x1de0000
591[ 0.845426] sps:BAM 0x0000000001dc4000 is registered.
592[ 0.845605] sps:BAM 0x0000000001dc4000 (va:0xffffff8015200000) enabled: ver:0x27, number of pipes:16
593[ 0.845870] QCE50: qce_sps_init: QTI MSM CE-BAM at 0x0000000001dc4000 irq 57
594[ 0.846098] iommu: Adding device 1de0000.qcedev:qcom_cedev_ns_cb to group 21
595[ 0.846968] qcedev_setup_context_bank Attached 1de0000.qcedev:qcom_cedev_ns_cb and create mapping
596[ 0.846974] qcedev_setup_context_bank Context Bank name:ns_context, is_secure:0, start_addr:0x60000000
597[ 0.847050] iommu: Adding device 1de0000.qcedev:qcom_cedev_s_cb to group 22
598[ 0.849575] qcedev_setup_context_bank Attached 1de0000.qcedev:qcom_cedev_s_cb and create mapping
599[ 0.849582] qcedev_setup_context_bank Context Bank name:secure_context, is_secure:1, start_addr:0xa0000000
600[ 0.850635] iommu: Adding device 1de0000.qcrypto to group 23
601[ 0.850693] register_client_adhoc:find path.src 125 dest 512
602[ 0.850864] register_client_adhoc:Client handle 37 qcrypto-noc
603[ 0.851066] QCE50: __qce_get_device_tree_data: CE operating frequency is not defined, setting to default 100MHZ
604[ 0.852342] qcrypto 1de0000.qcrypto: QTI Crypto 5.4.2 device found @0x1de0000
605[ 0.852709] QCE50: qce_sps_init: QTI MSM CE-BAM at 0x0000000001dc4000 irq 57
606[ 0.852966] qcrypto 1de0000.qcrypto: qcrypto-ecb-aes
607[ 0.853065] qcrypto 1de0000.qcrypto: qcrypto-cbc-aes
608[ 0.853191] qcrypto 1de0000.qcrypto: qcrypto-ctr-aes
609[ 0.853306] qcrypto 1de0000.qcrypto: qcrypto-ecb-des
610[ 0.853413] qcrypto 1de0000.qcrypto: qcrypto-cbc-des
611[ 0.853536] qcrypto 1de0000.qcrypto: qcrypto-ecb-3des
612[ 0.853636] qcrypto 1de0000.qcrypto: qcrypto-cbc-3des
613[ 0.853735] qcrypto 1de0000.qcrypto: qcrypto-xts-aes
614[ 0.853836] qcrypto 1de0000.qcrypto: qcrypto-sha1
615[ 0.853936] qcrypto 1de0000.qcrypto: qcrypto-sha256
616[ 0.854050] qcrypto 1de0000.qcrypto: qcrypto-aead-hmac-sha1-cbc-aes
617[ 0.854153] qcrypto 1de0000.qcrypto: qcrypto-aead-hmac-sha1-cbc-des
618[ 0.854254] qcrypto 1de0000.qcrypto: qcrypto-aead-hmac-sha1-cbc-3des
619[ 0.854351] qcrypto 1de0000.qcrypto: qcrypto-aead-hmac-sha256-cbc-aes
620[ 0.854448] qcrypto 1de0000.qcrypto: qcrypto-aead-hmac-sha256-cbc-des
621[ 0.854547] qcrypto 1de0000.qcrypto: qcrypto-aead-hmac-sha256-cbc-3des
622[ 0.854646] qcrypto 1de0000.qcrypto: qcrypto-hmac-sha1
623[ 0.854759] qcrypto 1de0000.qcrypto: qcrypto-hmac-sha256
624[ 0.854856] qcrypto 1de0000.qcrypto: qcrypto-aes-ccm
625[ 0.854963] qcrypto 1de0000.qcrypto: qcrypto-rfc4309-aes-ccm
626[ 0.856239] ufshcd-qcom 1d84000.ufshc: ufshcd_populate_vreg: Unable to find vccq-supply regulator, assuming enabled
627[ 0.858704] qcom_ice_get_pdevice: found ice device ffffffe22baeb400
628[ 0.858710] qcom_ice_get_pdevice: matching platform device ffffffe2360f7c00
629[ 0.858879] register_client_adhoc:find path.src 123 dest 512
630[ 0.859051] register_client_adhoc:find path.src 1 dest 757
631[ 0.859174] register_client_adhoc:Client handle 38 ufshc_mem
632[ 0.859966] scsi host0: ufshcd
633[ 0.864612] qcom_ice 1d90000.ufsice: QC ICE 3.1.79 device found @0xffffff80153d8000
634[ 0.880656] SCSI Media Changer driver v0.25
635[ 0.882699] spmi_pmic_arb_debug 6b22000.qcom,spmi-debug: SPMI PMIC arbiter debug bus disabled by fuse
636[ 0.882830] Ethernet Channel Bonding Driver: v3.7.1 (April 27, 2011)
637[ 0.883837] libphy: Fixed MDIO Bus: probed
638[ 0.883842] tun: Universal TUN/TAP device driver, 1.6
639[ 0.883886] sky2: driver version 1.30
640[ 0.884097] PPP generic driver version 2.4.2
641[ 0.884138] PPP BSD Compression module registered
642[ 0.884145] PPP Deflate Compression module registered
643[ 0.884198] PPP MPPE Compression module registered
644[ 0.884206] NET: Registered protocol family 24
645[ 0.884307] CLD80211: Initializing
646[ 0.884382] usbcore: registered new interface driver asix
647[ 0.884462] usbcore: registered new interface driver ax88179_178a
648[ 0.884476] usbcore: registered new interface driver cdc_ether
649[ 0.884486] usbcore: registered new interface driver net1080
650[ 0.884499] usbcore: registered new interface driver cdc_subset
651[ 0.884511] usbcore: registered new interface driver zaurus
652[ 0.884527] usbcore: registered new interface driver cdc_ncm
653[ 0.891021] msm_sharedmem: msm_sharedmem_probe: Device created for client 'rmtfs'
654[ 0.892498] iommu: Adding device a600000.ssusb to group 24
655[ 0.894649] dwc3 a600000.dwc3: changing max_speed on rev 00000000
656[ 0.896311] register_client_adhoc:find path.src 61 dest 512
657[ 0.896557] register_client_adhoc:find path.src 61 dest 676
658[ 0.896643] register_client_adhoc:find path.src 1 dest 583
659[ 0.896736] register_client_adhoc:Client handle 39 usb0
660[ 0.897097] msm-dwc3 a600000.ssusb: Not attached
661[ 0.898713] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
662[ 0.898732] ehci-pci: EHCI PCI platform driver
663[ 0.898747] ehci-platform: EHCI generic platform driver
664[ 0.898923] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
665[ 0.898932] ohci-pci: OHCI PCI platform driver
666[ 0.898951] ohci-platform: OHCI generic platform driver
667[ 0.899288] usbcore: registered new interface driver usb-storage
668[ 0.899305] usbcore: registered new interface driver usb_ehset_test
669[ 0.899316] usbcore: registered new interface driver lvs
670[ 0.901091] qpnp-pdphy c440000.qcom,spmi:qcom,pm8150b@2:qcom,usb-pdphy@1700: usbpd_create failed: -517
671[ 0.902024] input: qti-haptics as /devices/platform/soc/c440000.qcom,spmi/spmi-0/spmi0-03/c440000.qcom,spmi:qcom,pm8150b@3:qcom,haptics@c000/input/input1
672[ 0.902212] ufshcd-qcom 1d84000.ufshc: ufshcd_print_pwr_info:[RX, TX]: gear=[1, 1], lane[1, 1], pwr[SLOWAUTO_MODE, SLOWAUTO_MODE], rate = 0
673[ 0.902421] gf_platform: gf::irq_gpio:120
674[ 0.902478] input: uinput-goodix as /devices/virtual/input/input2
675[ 0.902510] gf_spi: version V1.2.01
676[ 0.902581] gf_spi: status = 0x0
677[ 0.902935] qcom,qpnp-rtc c440000.qcom,spmi:qcom,pm8150@0:qcom,pm8150_rtc: rtc core: registered qpnp_rtc as rtc0
678[ 0.903052] i2c /dev entries driver
679[ 0.903515] i2c_geni 890000.i2c: Bus frequency not specified, default to 400KHz.
680[ 0.906726] PMIC@SID0: (null) v2.0 options: 0, 0, 0, 0
681[ 0.906888] I2C PMIC: i2c_pmic_probe: I2C PMIC probe successful
682[ 0.907931] i2c_geni a84000.i2c: Bus frequency not specified, default to 400KHz.
683[ 0.908476] i2c_geni c80000.i2c: Bus frequency not specified, default to 400KHz.
684[ 0.908746] nq-nci 1-0028: ese GPIO <OPTIONAL> error getting from OF node
685[ 0.908756] nq-nci 1-0028: nfc_parse_dt: clk-src not provided
686[ 0.908827] nq-nci 1-0028: nqx_probe: ese gpio not provided
687[ 0.909106] lirc_dev: IR Remote Control driver registered, major 494
688[ 0.909114] IR NEC protocol handler initialized
689[ 0.909120] IR RC5(x/sz) protocol handler initialized
690[ 0.909126] IR RC6 protocol handler initialized
691[ 0.909133] IR JVC protocol handler initialized
692[ 0.909140] IR Sony protocol handler initialized
693[ 0.909148] IR SANYO protocol handler initialized
694[ 0.909154] IR Sharp protocol handler initialized
695[ 0.909160] IR MCE Keyboard/mouse protocol handler initialized
696[ 0.909167] IR LIRC bridge handler initialized
697[ 0.909173] IR XMP protocol handler initialized
698[ 0.909238] ir-spi spi1.0: lirc_dev: driver ir-spi registered at minor = 0
699[ 0.909562] genirq: irq_chip msmgpio-dc did not update eff. affinity mask of irq 161
700[ 0.909619] nq-nci 1-0028: nqx_probe: probing NFCC NQxxx exited successfully
701[ 0.909788] iommu: Adding device 9800000.qcom,msm_npu to group 25
702[ 0.909853] msm_npu: unable to get qfprom_physical resource
703[ 0.912916] iommu: Adding device aa00000.qcom,vidc:non_secure_cb to group 26
704[ 0.913578] iommu: Adding device aa00000.qcom,vidc:secure_non_pixel_cb to group 27
705[ 0.915917] iommu: Adding device aa00000.qcom,vidc:secure_bitstream_cb to group 28
706[ 0.917458] iommu: Adding device aa00000.qcom,vidc:secure_pixel_cb to group 29
707[ 0.918859] platform aa00000.qcom,vidc:qcom,msm-vidc,mem_cdsp: assigned reserved memory node cdsp_region
708[ 0.920569] iommu: Adding device soc:qcom,cam_smmu:msm_cam_smmu_ife to group 30
709[ 0.920654] iommu: Adding device soc:qcom,cam_smmu:msm_cam_smmu_jpeg to group 31
710[ 0.920680] platform soc:qcom,cam_smmu:msm_cam_icp_fw: assigned reserved memory node camera_region@8b700000
711[ 0.920788] iommu: Adding device soc:qcom,cam_smmu:msm_cam_smmu_icp to group 32
712[ 0.920859] iommu: Adding device soc:qcom,cam_smmu:msm_cam_smmu_cpas_cdm to group 33
713[ 0.920964] iommu: Adding device soc:qcom,cam_smmu:msm_cam_smmu_fd to group 34
714[ 0.921026] iommu: Adding device soc:qcom,cam_smmu:msm_cam_smmu_lrme to group 35
715[ 0.922050] register_client_adhoc:find path.src 1 dest 589
716[ 0.922283] register_client_adhoc:Client handle 39 cam_ahb
717[ 0.922513] register_client_adhoc:find path.src 136 dest 512
718[ 0.922604] register_client_adhoc:Client handle 40 cam_hf_1_mnoc
719[ 0.922723] register_client_adhoc:find path.src 146 dest 778
720[ 0.922755] register_client_adhoc:Client handle 41 cam_hf_1_camnoc
721[ 0.922776] register_client_adhoc:find path.src 145 dest 512
722[ 0.922848] register_client_adhoc:Client handle 42 cam_hf_2_mnoc
723[ 0.922956] register_client_adhoc:find path.src 147 dest 778
724[ 0.922983] register_client_adhoc:Client handle 43 cam_hf_2_camnoc
725[ 0.923002] register_client_adhoc:find path.src 137 dest 512
726[ 0.923094] register_client_adhoc:Client handle 44 cam_sf_1_mnoc
727[ 0.923205] register_client_adhoc:find path.src 148 dest 778
728[ 0.923235] register_client_adhoc:Client handle 45 cam_sf_1_camnoc
729[ 0.929710] CAM_WARN: CAM-ISP: cam_vfe_top_ver2_init: 823 Invalid mux type: 0
730[ 0.929792] CAM_ERR: CAM-ISP: cam_vfe_bus_rd_ver1_init: 1083 Inval_prms soc_info:ffffffe22afbc050 hw_intf:ffffffe22af9cc00 hw_info0000000000000000
731[ 0.929796] CAM_ERR: CAM-ISP: cam_vfe_bus_rd_ver1_init: 1084 controller: ffffffe22a86ff00
732[ 0.929803] CAM_ERR: CAM-ISP: cam_vfe_core_init: 861 Error! RD cam_vfe_bus_init failed
733[ 0.932149] CAM_WARN: CAM-ISP: cam_vfe_top_ver2_init: 823 Invalid mux type: 0
734[ 0.932207] CAM_ERR: CAM-ISP: cam_vfe_bus_rd_ver1_init: 1083 Inval_prms soc_info:ffffffe22a878050 hw_intf:ffffffe22af9f680 hw_info0000000000000000
735[ 0.932211] CAM_ERR: CAM-ISP: cam_vfe_bus_rd_ver1_init: 1084 controller: ffffffe22a898e00
736[ 0.932215] CAM_ERR: CAM-ISP: cam_vfe_core_init: 861 Error! RD cam_vfe_bus_init failed
737[ 0.934317] CAM_ERR: CAM-UTIL: cam_soc_util_get_option_clk_by_name: 522 No clk named ife_dsp_clk found. Dev vfe2
738[ 0.934319] CAM_WARN: CAM-ISP: cam_vfe_init_soc_resources: 110 Option clk get failed with rc -14
739[ 0.934377] CAM_WARN: CAM-ISP: cam_vfe_top_ver2_init: 823 Invalid mux type: 0
740[ 0.934379] CAM_WARN: CAM-ISP: cam_vfe_top_ver2_init: 823 Invalid mux type: 0
741[ 0.935900] CAM_ERR: CAM-UTIL: cam_soc_util_get_option_clk_by_name: 522 No clk named ife_dsp_clk found. Dev vfe3
742[ 0.935903] CAM_WARN: CAM-ISP: cam_vfe_init_soc_resources: 110 Option clk get failed with rc -14
743[ 0.935951] CAM_WARN: CAM-ISP: cam_vfe_top_ver2_init: 823 Invalid mux type: 0
744[ 0.935954] CAM_WARN: CAM-ISP: cam_vfe_top_ver2_init: 823 Invalid mux type: 0
745[ 0.938732] CAM_INFO: CAM-ISP: cam_isp_dev_probe: 171 Camera ISP probe complete
746[ 0.940167] CAM_ERR: CAM-CCI: cam_cci_platform_probe: 405 Device Type :0
747[ 0.940846] CAM_INFO: CAM: cam_res_mgr_probe: 689 Disable shared gpio support.
748[ 0.941655] CAM_ERR: CAM-CCI: cam_cci_platform_probe: 405 Device Type :1
749[ 0.942755] CAM_INFO: CAM-ACTUATOR: cam_actuator_parse_dt: 69 No GPIO found
750[ 0.942777] CAM_INFO: CAM-ACTUATOR: cam_actuator_parse_dt: 69 No GPIO found
751[ 0.942798] CAM_INFO: CAM-ACTUATOR: cam_actuator_parse_dt: 69 No GPIO found
752[ 0.942817] CAM_INFO: CAM-ACTUATOR: cam_actuator_parse_dt: 69 No GPIO found
753[ 0.943549] CAM_INFO: CAM-FLASH: cam_get_source_node_info: 118 op-current: read failed
754[ 0.943555] CAM_INFO: CAM-FLASH: cam_get_source_node_info: 129 max-duration prop unavailable: -22
755[ 0.943566] CAM_WARN: CAM-FLASH: cam_get_source_node_info: 205 op-current prop unavailable: -22
756[ 0.946232] CAM_ERR: CAM-SMMU: cam_smmu_create_add_handle_in_table: 687 Error: cam-secure already got handle 0x48bcf
757[ 0.947993] CAM_INFO: CAM-JPEG: cam_jpeg_dev_probe: 170 Camera JPEG probe complete
758[ 0.955044] usbcore: registered new interface driver uvcvideo
759[ 0.955055] USB Video Class driver (1.1.1)
760[ 0.955573] FG: fg_clear_dma_errors_if_any: dma_sts: 0
761[ 0.957181] FG_DELTA_ESR_IRQ: current vote is now 1 voted by fg_delta_esr_irq,0, previous voted 0
762[ 0.957512] esr_charging_timer set to 0/7
763[ 0.957839] esr_discharging_timer set to 0/7
764[ 0.958817] Alarmtimer { swapper/0', '105958'}
765[ 0.958825] FG: fg_gen4_esr_fast_calib_config: Enabling ESR fast calibration
766[ 0.960497] (NULL device *): hwmon_device_register() is deprecated. Please convert the driver to use hwmon_device_register_with_info().
767[ 0.964387] FG_DELTA_BSOC_IRQ: current vote is now 0 voted by fg_delta_bsoc_irq,0, previous voted 0
768[ 0.964394] FG_MEM_ATTN_IRQ: current vote is now 0 voted by fg_mem_attn_irq,0, previous voted 0
769[ 0.964402] FG: fg_gen4_mem_attn_irq_en_cb: disabled mem_attn irq
770[ 0.964704] FG: fg_gen4_probe: battery SOC:89 voltage: 4178944uV temp: 345 id: 67700 ohms
771[ 0.966320] of_batterydata_get_best_profile: f1_atl found
772[ 0.966508] FG: is_profile_load_required: Battery profile integrity bit is set
773[ 0.966752] FG: is_profile_load_required: Battery profile is same, not loading it
774[ 0.967799] FG: soc_work_fn: adjust_soc: s 50 r 131591 i 465 v 4178 t 345 cc 8 m 0xe3
775[ 0.968125] FG: fg_gen4_bp_params_config: Rslow_low: 0
776[ 0.968931] FG: profile_load_work: profile loaded successfully
777[ 0.968940] FG: status_change_work: Charger not available?!
778[ 0.968950] FG: status_change_work: charge_status:-22 charge_type:0 charge_done:0
779[ 0.969163] QNOVO_CHG_READY: current vote is now 0 voted by USB_READY_VOTER,0, previous voted 0
780[ 0.969168] QNOVO_NOT_OK: current vote is now 1 voted by CHG_READY_VOTER,0, previous voted 0
781[ 0.969174] QNOVO_DISABLE: current vote is now 1 voted by ok_to_qnovo_voter,0, previous voted 0
782[ 0.969179] QNOVO_PT_DIS: current vote is now 1 voted by QNOVO_OVERALL_VOTER,0, previous voted 0
783[ 0.969776] Couldn't parse device tree rc=-517
784[ 0.969931] SMB1390: smb1390_probe: Couldn't parse device tree rc=-517
785[ 0.973155] idtp9220 0-003b: [idt] success probe idtp922x driver
786[ 0.978181] ufshcd-qcom 1d84000.ufshc: ufshcd_print_pwr_info:[RX, TX]: gear=[3, 3], lane[2, 2], pwr[FAST MODE, FAST MODE], rate = 2
787[ 0.980173] i2c_geni 890000.i2c: i2c error :-107
788[ 0.980252] i2c_geni 890000.i2c: i2c error :-107
789[ 0.980256] idtp9220 0-003b: vout regulator get vol: 50944
790[ 0.981823] scsi 0:0:0:49488: Well-known LUN WDC SDINDDH4-64G 1322 PQ: 0 ANSI: 6
791[ 0.982813] device-mapper: uevent: version 1.0.3
792[ 0.982884] device-mapper: ioctl: 4.37.0-ioctl (2017-09-20) initialised: dm-devel@redhat.com
793[ 0.983128] bt_dt_parse_vreg_info: qca,bt-vdd-vl: is not provided in device tree
794[ 0.983131] bt_dt_parse_vreg_info: qca,bt-vdd-vm: is not provided in device tree
795[ 0.983134] bt_dt_parse_vreg_info: qca,bt-vdd-5c: is not provided in device tree
796[ 0.983137] bt_dt_parse_vreg_info: qca,bt-vdd-vh: is not provided in device tree
797[ 0.983141] bt_dt_parse_vreg_info: qca,bt-vdd-io: is not provided in device tree
798[ 0.983144] bt_dt_parse_vreg_info: qca,bt-vdd-xtal: is not provided in device tree
799[ 0.983153] bt_dt_parse_vreg_info: qca,bt-chip-pwd: is not provided in device tree
800[ 0.983161] bt_power_populate_dt_pinfo: bt-reset-gpio not provided in device tree
801[ 0.983165] bt_dt_parse_clk_info: clocks is not provided in device tree
802[ 0.983168] bt_power_populate_dt_pinfo: clock not provided in device tree
803[ 0.983436] EDAC DEVICE0: Giving out device to module soc:kryo-erp controller cache: DEV soc:kryo-erp (INTERRUPT)
804[ 0.983853] sdhci: Secure Digital Host Controller Interface driver
805[ 0.983856] sdhci: Copyright(c) Pierre Ossman
806[ 0.983859] sdhci-pltfm: SDHCI platform and OF driver helper
807[ 0.984728] usbcore: registered new interface driver usbhid
808[ 0.984732] usbhid: USB HID core driver
809[ 0.984790] ashmem: initialized
810[ 0.984885] ipa_ut ipa_ut_module_init:1043 Loading IPA test module...
811[ 0.985835] seemp: seemp_logk_init: SCM call failed with ret val = 0 -3 0
812[ 0.985973] bimc-bwmon 90b6400.qcom,cpu-cpu-llcc-bwmon: BW HWmon governor registered.
813[ 0.985996] bimc-bwmon 90cd000.qcom,cpu-llcc-ddr-bwmon: BW HWmon governor registered.
814[ 0.986018] bimc-bwmon 9960300.qcom,npu-npu-ddr-bwmon: BW HWmon governor registered.
815[ 0.986208] arm-memlat-mon soc:qcom,cpu0-cpu-l3-latmon: Memory Latency governor registered.
816[ 0.986225] arm-memlat-mon soc:qcom,cpu4-cpu-l3-latmon: Memory Latency governor registered.
817[ 0.986239] arm-memlat-mon soc:qcom,cpu7-cpu-l3-latmon: Memory Latency governor registered.
818[ 0.986253] arm-memlat-mon soc:qcom,cpu0-cpu-llcc-latmon: Memory Latency governor registered.
819[ 0.986266] arm-memlat-mon soc:qcom,cpu4-cpu-llcc-latmon: Memory Latency governor registered.
820[ 0.986278] arm-memlat-mon soc:qcom,cpu0-llcc-ddr-latmon: Memory Latency governor registered.
821[ 0.986291] arm-memlat-mon soc:qcom,cpu4-llcc-ddr-latmon: Memory Latency governor registered.
822[ 0.986306] arm-memlat-mon soc:qcom,cpu4-computemon: Compute governor registered.
823[ 0.986820] register_client_adhoc:find path.src 1 dest 770
824[ 0.986903] register_client_adhoc:Client handle 46 soc:qcom,cpu-cpu-llcc-bw
825[ 0.987414] register_client_adhoc:find path.src 129 dest 512
826[ 0.987440] register_client_adhoc:Client handle 47 soc:qcom,cpu-llcc-ddr-bw
827[ 0.987503] scsi 0:0:0:49456: Well-known LUN WDC SDINDDH4-64G 1322 PQ: 0 ANSI: 6
828[ 0.988110] register_client_adhoc:find path.src 154 dest 512
829[ 0.988171] register_client_adhoc:Client handle 48 soc:qcom,npu-npu-ddr-bw
830[ 0.988344] register_client_adhoc:find path.src 1 dest 770
831[ 0.988365] register_client_adhoc:Client handle 49 soc:qcom,cpu0-cpu-llcc-lat
832[ 0.988505] register_client_adhoc:find path.src 1 dest 770
833[ 0.988525] register_client_adhoc:Client handle 51 soc:qcom,cpu4-cpu-llcc-lat
834[ 0.988691] register_client_adhoc:find path.src 129 dest 512
835[ 0.988712] register_client_adhoc:Client handle 50 soc:qcom,cpu0-llcc-ddr-lat
836[ 0.988880] register_client_adhoc:find path.src 129 dest 512
837[ 0.988899] register_client_adhoc:Client handle 52 soc:qcom,cpu4-llcc-ddr-lat
838[ 0.989083] register_client_adhoc:find path.src 129 dest 512
839[ 0.989102] register_client_adhoc:Client handle 53 soc:qcom,cpu4-cpu-ddr-latfloor
840[ 0.989211] register_client_adhoc:find path.src 1 dest 627
841[ 0.989278] register_client_adhoc:Client handle 54 soc:qcom,snoc_cnoc_keepalive
842[ 0.989396] register_client_adhoc:find path.src 154 dest 10070
843[ 0.989410] register_client_adhoc:Client handle 55 soc:qcom,cdsp_keepalive
844[ 0.989623] register_client_adhoc:find path.src 26 dest 512
845[ 0.989665] register_client_adhoc:Client handle 56 soc:qcom,gpubw
846[ 0.991444] us_prox_probe: start
847[ 0.991487] us_prox_probe: end
848[ 0.991577] qcom-llcc-pmu 90cc000.llcc-pmu: Registered llcc_pmu, type: 7
849[ 0.991710] coresight-tmc 6b09000.tmc: invalid cti data
850[ 0.991733] iommu: Adding device 6048000.tmc to group 36
851[ 0.991980] coresight-tmc 6048000.tmc: failed to get flush cti, defer probe
852[ 0.992137] coresight-tmc 6047000.tmc: failed to get flush cti, defer probe
853[ 0.992216] scsi 0:0:0:49476: Well-known LUN WDC SDINDDH4-64G 1322 PQ: 0 ANSI: 6
854[ 0.996532] coresight-stm 6002000.stm: stm_register_device failed, probing deffered
855[ 0.996604] OF: graph: no port node found in /soc/cti@78e0000
856[ 0.996709] OF: graph: no port node found in /soc/cti@78f0000
857[ 0.996813] OF: graph: no port node found in /soc/cti@7900000
858[ 0.996916] OF: graph: no port node found in /soc/cti@6a02000
859[ 0.996995] scsi 0:0:0:0: Direct-Access WDC SDINDDH4-64G 1322 PQ: 0 ANSI: 6
860[ 0.997015] OF: graph: no port node found in /soc/cti@6a03000
861[ 0.997116] OF: graph: no port node found in /soc/cti@6a10000
862[ 0.997222] OF: graph: no port node found in /soc/cti@6a11000
863[ 0.997330] OF: graph: no port node found in /soc/cti@6c09000
864[ 0.997437] OF: graph: no port node found in /soc/cti@6c0a000
865[ 0.997539] OF: graph: no port node found in /soc/cti@6c29000
866[ 0.997645] OF: graph: no port node found in /soc/cti@6c2a000
867[ 0.997752] OF: graph: no port node found in /soc/cti@6010000
868[ 0.997859] OF: graph: no port node found in /soc/cti@6011000
869[ 0.998006] OF: graph: no port node found in /soc/cti@6012000
870[ 0.998116] OF: graph: no port node found in /soc/cti@6013000
871[ 0.998220] OF: graph: no port node found in /soc/cti@6014000
872[ 0.998326] OF: graph: no port node found in /soc/cti@6015000
873[ 0.998433] OF: graph: no port node found in /soc/cti@6016000
874[ 0.998540] OF: graph: no port node found in /soc/cti@6017000
875[ 0.998645] OF: graph: no port node found in /soc/cti@6018000
876[ 0.998751] OF: graph: no port node found in /soc/cti@6019000
877[ 0.998854] OF: graph: no port node found in /soc/cti@601a000
878[ 0.998964] OF: graph: no port node found in /soc/cti@601b000
879[ 0.999072] OF: graph: no port node found in /soc/cti@601c000
880[ 0.999185] OF: graph: no port node found in /soc/cti@601d000
881[ 0.999292] OF: graph: no port node found in /soc/cti@601e000
882[ 0.999398] OF: graph: no port node found in /soc/cti@601f000
883[ 0.999507] OF: graph: no port node found in /soc/cti@7020000
884[ 0.999620] OF: graph: no port node found in /soc/cti@7120000
885[ 0.999731] OF: graph: no port node found in /soc/cti@7220000
886[ 0.999842] OF: graph: no port node found in /soc/cti@7320000
887[ 0.999954] OF: graph: no port node found in /soc/cti@7420000
888[ 1.000144] OF: graph: no port node found in /soc/cti@7520000
889[ 1.000184] OF: graph: no port node found in /soc/cti@7620000
890[ 1.000214] OF: graph: no port node found in /soc/cti@7720000
891[ 1.000257] OF: graph: no port node found in /soc/cti@6b04000
892[ 1.002149] scsi 0:0:0:1: Direct-Access WDC SDINDDH4-64G 1322 PQ: 0 ANSI: 6
893[ 1.002917] OF: graph: no port node found in /soc/csr@0x6001000
894[ 1.002938] coresight-csr 6001000.csr: CSR initialized: coresight-csr
895[ 1.002949] OF: graph: no port node found in /soc/csr@6b0e000
896[ 1.002965] coresight-csr 6b0e000.csr: CSR initialized: coresight-swao-csr
897[ 1.003088] OF: graph: no port node found in /soc/hwevent@0x091866F0
898[ 1.003108] coresight-hwevent 91866f0.hwevent: Hardware Event driver initialized
899[ 1.003257] coresight-dummy soc:tpdm@699c000: Dummy device initialized
900[ 1.003280] coresight-dummy soc:dummy_sink: Dummy device initialized
901[ 1.003454] coresight-remote-etm soc:turing_etm0: Remote ETM initialized
902[ 1.003518] coresight-remote-etm soc:modem_etm0: Remote ETM initialized
903[ 1.003573] coresight-remote-etm soc:audio_etm0: Remote ETM initialized
904[ 1.003637] coresight-remote-etm soc:ssc_etm0: Remote ETM initialized
905[ 1.003698] OF: graph: no port node found in /soc/tgu@6b0c000
906[ 1.004301] trusty-log not supported on secure side.
907[ 1.004421] trusty-virtio soc:trusty:virtio: initializing
908[ 1.004474] trusty-virtio soc:trusty:virtio: trusty_load_device_descr: virtio get descr returned (-1)
909[ 1.004477] trusty-virtio soc:trusty:virtio: failed (-19) to load device descr
910[ 1.004481] trusty-virtio soc:trusty:virtio: Failed to add virtio devices
911[ 1.004635] usbcore: registered new interface driver snd-usb-audio
912[ 1.004714] iommu: Adding device soc:usb_audio_qmi_dev to group 37
913[ 1.005315] GACT probability NOT on
914[ 1.005322] Mirror/redirect action on
915[ 1.005326] u32 classifier
916[ 1.005327] Actions configured
917[ 1.005333] Netfilter messages via NETLINK v0.30.
918[ 1.005435] nf_conntrack version 0.5.0 (65536 buckets, 262144 max)
919[ 1.005469] ctnetlink v0.93: registering with nfnetlink.
920[ 1.005608] xt_time: kernel timezone is -0000
921[ 1.005653] IPv4 over IPsec tunneling driver
922[ 1.005776] ip_tables: (C) 2000-2006 Netfilter Core Team
923[ 1.005925] arp_tables: arp_tables: (C) 2002 David S. Miller
924[ 1.005953] Initializing XFRM netlink socket
925[ 1.006019] NET: Registered protocol family 10
926[ 1.006363] Segment Routing with IPv6
927[ 1.006389] mip6: Mobile IPv6
928[ 1.006394] ip6_tables: (C) 2000-2006 Netfilter Core Team
929[ 1.006589] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver
930[ 1.006638] scsi 0:0:0:2: Direct-Access WDC SDINDDH4-64G 1322 PQ: 0 ANSI: 6
931[ 1.006740] NET: Registered protocol family 17
932[ 1.006746] NET: Registered protocol family 15
933[ 1.006753] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this.
934[ 1.006755] Ebtables v2.0 registered
935[ 1.006825] l2tp_core: L2TP core driver, V2.0
936[ 1.006829] l2tp_ppp: PPPoL2TP kernel driver, V2.0
937[ 1.006831] l2tp_ip: L2TP IP encapsulation support (L2TPv3)
938[ 1.006836] l2tp_netlink: L2TP netlink interface
939[ 1.006843] l2tp_eth: L2TP ethernet pseudowire support (L2TPv3)
940[ 1.006845] l2tp_ip6: L2TP IP encapsulation support for IPv6 (L2TPv3)
941[ 1.006869] sctp: Hash tables configured (bind 256/256)
942[ 1.011080] scsi 0:0:0:3: Direct-Access WDC SDINDDH4-64G 1322 PQ: 0 ANSI: 6
943[ 1.012509] dwc3 a600000.dwc3: changing max_speed on rev 00000000
944[ 1.013092] usb_bam_init: setting SPS_BAM_SMMU_EN flag with (a704000.qcom,usbbam)
945[ 1.013158] sps:BAM 0x000000000a704000 is registered.
946[ 1.013264] register_client_adhoc:find path.src 61 dest 512
947[ 1.013391] register_client_adhoc:find path.src 61 dest 676
948[ 1.013459] register_client_adhoc:find path.src 1 dest 583
949[ 1.013537] register_client_adhoc:Client handle 57 usb0
950[ 1.013725] msm-dwc3 a600000.ssusb: Not attached
951[ 1.014890] qpnp-pdphy c440000.qcom,spmi:qcom,pm8150b@2:qcom,usb-pdphy@1700: usbpd_create failed: -517
952[ 1.015128] PL_DISABLE: current vote is now 1 voted by CHG_STATE_VOTER,0, previous voted 0
953[ 1.015302] pm8150b_charger: smblib_masked_write: set 0x1544 mask:0x10,val:0x10
954[ 1.015411] USB_ICL: current vote is now -22 voted by (null),-22, previous voted -22
955[ 1.015413] DC_SUSPEND: current vote is now 0 voted by DEFAULT_VOTER,0, previous voted 0
956[ 1.015424] FCC: current vote is now 4800000 voted by HW_LIMIT_VOTER,0, previous voted -22
957[ 1.015427] FV: current vote is now 4400000 voted by HW_LIMIT_VOTER,0, previous voted -22
958[ 1.015429] DC_ICL: current vote is now 1000000 voted by DCIN_ADAPTER_VOTER,0, previous voted -22
959[ 1.015483] CHG_DISABLE: current vote is now 0 voted by DEFAULT_VOTER,0, previous voted 0
960[ 1.015528] scsi 0:0:0:4: Direct-Access WDC SDINDDH4-64G 1322 PQ: 0 ANSI: 6
961[ 1.015939] (NULL device *): hwmon_device_register() is deprecated. Please convert the driver to use hwmon_device_register_with_info().
962[ 1.016037] AWAKE: current vote is now 0 voted by CHG_AWAKE_VOTER,0, previous voted 0
963[ 1.016050] pm8150b_charger: smblib_update_usb_type: APSD=UNKNOWN PD=0
964[ 1.016087] DC_ICL: current vote is now 100000 voted by DCIN_ADAPTER_VOTER,0, previous voted 1000000
965[ 1.016099] SMB_EN_OVERRIDE: current vote is now 1 voted by PL_SMB_EN_VOTER,0, previous voted 0
966[ 1.016121] idtp9220 0-003b: [idtp] dc plug out
967[ 1.016134] USB_ICL: current vote is now 100000 voted by SW_ICL_MAX_VOTER,2, previous voted -22
968[ 1.016437] pm8150b_charger: smblib_get_prop_typec_power_role: TYPE_C_MODE_CFG_REG = 0x12
969[ 1.016854] i2c_geni 890000.i2c: i2c error :-107
970[ 1.016978] i2c_geni 890000.i2c: i2c error :-107
971[ 1.016981] idtp9220 0-003b: vout regulator get vol: 0
972[ 1.017064] i2c_geni 890000.i2c: i2c error :-107
973[ 1.017140] i2c_geni 890000.i2c: i2c error :-107
974[ 1.017142] idtp9220 0-003b: vout regulator get vol: 0
975[ 1.018467] Notified charger on float voltage and FCC
976[ 1.019914] FG: fg_gen4_prime_cc_soc_sw: cc_soc_sw: 35ef574f
977[ 1.020147] scsi 0:0:0:5: Direct-Access WDC SDINDDH4-64G 1322 PQ: 0 ANSI: 6
978[ 1.020455] of_batterydata_get_best_profile: f1_atl found
979[ 1.020738] PL_ENABLE_INDIRECT: current vote is now 0 voted by USBIN_I_VOTER,0, previous voted 0
980[ 1.020751] icl_ua value is: 100000
981[ 1.020907] pm8150b_charger: smblib_rerun_aicl: re-running AICL
982[ 1.020939] icl_ua value is: 100000
983[ 1.020996] pm8150b_charger: smblib_rerun_aicl: re-running AICL
984[ 1.021015] pm8150b_charger: smblib_set_prop_typec_power_role: set power_role to 0x10
985[ 1.021017] pm8150b_charger: smblib_masked_write: set 0x1544 mask:0x1f,val:0x10
986[ 1.021084] SMB5 status - usb:present=0 type=0 batt:present = 1 health = 1 charge = 1
987[ 1.021086] QPNP SMB5 probed successfully
988[ 1.021088] pm8150b_charger: smblib_support_liquid_feature: support_liquid is 0
989[ 1.021190] CP_DISABLE: current vote is now 1 voted by USER_VOTER,0, previous voted 0
990[ 1.021309] CP_ILIM: current vote is now 2400000 voted by FCC_VOTER,0, previous voted -22
991[ 1.021311] SMB1390: smb1390_ilim_vote_cb: setting ILIM to 2400000uA
992[ 1.021444] CP_AWAKE: current vote is now 0 voted by CP_VOTER,0, previous voted 0
993[ 1.021620] FG: fg_gen4_adjust_ki_coeff_full_soc: Wrote ki_coeff_full_soc [0 0]
994[ 1.021643] FG: status_change_work: charge_status:2 charge_type:1 charge_done:0
995[ 1.022418] SMB1390: smb1390_probe: smb1390 probed successfully
996[ 1.022701] i2c_geni 890000.i2c: i2c error :-107
997[ 1.023014] i2c_geni 890000.i2c: i2c error :-107
998[ 1.023017] idtp9220 0-003b: vout regulator get vol: 0
999[ 1.023884] FG: status_change_work: charge_status:2 charge_type:1 charge_done:0
1000[ 1.032121] coresight-tmc 6b09000.tmc: invalid cti data
1001[ 1.032509] tmc_etr_bam_init: setting SPS_BAM_SMMU_EN flag with (6048000.tmc)
1002[ 1.032580] sps:BAM 0x0000000006064000 is registered.
1003[ 1.032894] coresight-stm 6002000.stm: STM32 initialized with master Disabled
1004[ 1.033742] dwc3 a600000.dwc3: changing max_speed on rev 00000000
1005[ 1.034336] usb_bam_init: setting SPS_BAM_SMMU_EN flag with (a704000.qcom,usbbam)
1006[ 1.034395] sps:BAM 0x000000000a704000 is registered.
1007[ 1.034483] register_client_adhoc:find path.src 61 dest 512
1008[ 1.034606] register_client_adhoc:find path.src 61 dest 676
1009[ 1.034673] register_client_adhoc:find path.src 1 dest 583
1010[ 1.034748] register_client_adhoc:Client handle 57 usb0
1011[ 1.034942] msm-dwc3 a600000.ssusb: Not attached
1012[ 1.036034] usbpd usbpd0: failed to read pd vbus limit
1013[ 1.036920] dwc3 a600000.dwc3: changing max_speed on rev 00000000
1014[ 1.037476] usb_bam_init: setting SPS_BAM_SMMU_EN flag with (a704000.qcom,usbbam)
1015[ 1.037527] sps:BAM 0x000000000a704000 is registered.
1016[ 1.037605] register_client_adhoc:find path.src 61 dest 512
1017[ 1.037708] register_client_adhoc:find path.src 61 dest 676
1018[ 1.037774] register_client_adhoc:find path.src 1 dest 583
1019[ 1.037847] register_client_adhoc:Client handle 57 usb0
1020[ 1.038059] sd 0:0:0:5: [sdf] Write Protect is off
1021[ 1.038103] sd 0:0:0:5: [sdf] Mode Sense: 00 32 00 10
1022[ 1.038196] core_ctl: Creating CPU group 0
1023[ 1.038199] core_ctl: Init CPU0 state
1024[ 1.038200] core_ctl: Init CPU1 state
1025[ 1.038202] core_ctl: Init CPU2 state
1026[ 1.038203] core_ctl: Init CPU3 state
1027[ 1.038273] core_ctl: Creating CPU group 4
1028[ 1.038274] core_ctl: Init CPU4 state
1029[ 1.038276] core_ctl: Init CPU5 state
1030[ 1.038277] core_ctl: Init CPU6 state
1031[ 1.038393] core_ctl: Creating CPU group 7
1032[ 1.038394] core_ctl: Init CPU7 state
1033[ 1.038517] registered taskstats version 1
1034[ 1.038519] Loading compiled-in X.509 certificates
1035[ 1.039777] Loaded X.509 cert 'Build time autogenerated kernel key: 67c8d5c80b3101093aaf6132d2f52afbf131d52e'
1036[ 1.039784] page_owner is disabled
1037[ 1.039866] write 0x84 to 0x70
1038[ 1.039872] write 0x2c to 0x74
1039[ 1.040230] i2c_geni 890000.i2c: i2c error :-107
1040[ 1.040329] pm8150b_charger: smblib_get_prop_typec_power_role: TYPE_C_MODE_CFG_REG = 0x10
1041[ 1.040385] i2c_geni 890000.i2c: i2c error :-107
1042[ 1.040388] idtp9220 0-003b: vout regulator get vol: 0
1043[ 1.040465] i2c_geni 890000.i2c: i2c error :-107
1044[ 1.040595] i2c_geni 890000.i2c: i2c error :-107
1045[ 1.040597] idtp9220 0-003b: vout regulator get vol: 0
1046[ 1.040878] FG: status_change_work: charge_status:2 charge_type:1 charge_done:0
1047[ 1.045708] sd 0:0:0:1: [sdb] Write Protect is off
1048[ 1.045717] sd 0:0:0:1: [sdb] Mode Sense: 00 32 00 10
1049[ 1.058390] sd 0:0:0:0: [sda] Write Protect is off
1050[ 1.058397] sd 0:0:0:0: [sda] Mode Sense: 00 32 00 10
1051[ 1.062254] sd 0:0:0:3: [sdd] Write Protect is off
1052[ 1.062261] sd 0:0:0:3: [sdd] Mode Sense: 00 32 00 10
1053[ 1.066442] sd 0:0:0:4: [sde] Write Protect is off
1054[ 1.066449] sd 0:0:0:4: [sde] Mode Sense: 00 32 00 10
1055[ 1.068036] sd 0:0:0:2: [sdc] Write Protect is off
1056[ 1.068043] sd 0:0:0:2: [sdc] Mode Sense: 00 32 00 10
1057[ 1.081199] sdf: sdf1 sdf2 sdf3 sdf4 sdf5 sdf6
1058[ 1.090800] msm-dwc3 a600000.ssusb: DWC3 exited from low power mode
1059[ 1.091333] msm-dwc3 a600000.ssusb: DWC3 in low power mode
1060[ 1.126679] spss_utils [spss_init]: spss-utils driver Ver 3.0 18-Feb-2018.
1061[ 1.126877] spss_utils [spss_probe]: Initialization completed ok, firmware_name [spss2p].
1062[ 1.128222] sdb: sdb1 sdb2
1063[ 1.129641] iommu: Adding device soc:qcom,msm_fastrpc:qcom,msm_fastrpc_compute_cb1 to group 38
1064[ 1.130068] iommu: Adding device soc:qcom,msm_fastrpc:qcom,msm_fastrpc_compute_cb4 to group 39
1065[ 1.130333] iommu: Adding device soc:qcom,msm_fastrpc:qcom,msm_fastrpc_compute_cb5 to group 40
1066[ 1.130530] sda: sda1 sda2 sda3 sda4 sda5 sda6 sda7 sda8 sda9 sda10 sda11 sda12 sda13 sda14 sda15 sda16 sda17 sda18 sda19 sda20 sda21 sda22 sda23 sda24 sda25 sda26 sda27 sda28 sda29 sda30 sda31
1067[ 1.130606] iommu: Adding device soc:qcom,msm_fastrpc:qcom,msm_fastrpc_compute_cb6 to group 41
1068[ 1.130921] iommu: Adding device soc:qcom,msm_fastrpc:qcom,msm_fastrpc_compute_cb7 to group 42
1069[ 1.131197] iommu: Adding device soc:qcom,msm_fastrpc:qcom,msm_fastrpc_compute_cb8 to group 43
1070[ 1.131465] iommu: Adding device soc:qcom,msm_fastrpc:qcom,msm_fastrpc_compute_cb2 to group 44
1071[ 1.131726] iommu: Adding device soc:qcom,msm_fastrpc:qcom,msm_fastrpc_compute_cb3 to group 45
1072[ 1.131791] sdc: sdc1 sdc2
1073[ 1.131819] sdd: sdd1 sdd2 sdd3 sdd4 sdd5
1074[ 1.132038] iommu: Adding device soc:qcom,msm_fastrpc:qcom,msm_fastrpc_compute_cb9 to group 46
1075[ 1.132765] iommu: Adding device soc:qcom,msm_fastrpc:qcom,msm_fastrpc_compute_cb10 to group 47
1076[ 1.133044] iommu: Adding device soc:qcom,msm_fastrpc:qcom,msm_fastrpc_compute_cb11 to group 48
1077[ 1.133310] iommu: Adding device soc:qcom,msm_fastrpc:qcom,msm_fastrpc_compute_cb12 to group 49
1078[ 1.133573] iommu: Adding device soc:qcom,msm_fastrpc:qcom,msm_fastrpc_compute_cb13 to group 50
1079[ 1.133839] iommu: Adding device soc:qcom,msm_fastrpc:qcom,msm_fastrpc_compute_cb14 to group 51
1080[ 1.134105] iommu: Adding device soc:qcom,msm_fastrpc:qcom,msm_fastrpc_compute_cb15 to group 52
1081[ 1.134687] [drm-dp] dp_display_init_aux_switch: cannot parse qcom,dp-aux-switch handle
1082[ 1.135019] register_client_adhoc:find path.src 1 dest 590
1083[ 1.135112] register_client_adhoc:Client handle 58 mdss_reg
1084[ 1.135125] register_client_adhoc:find path.src 22 dest 512
1085[ 1.135204] register_client_adhoc:find path.src 23 dest 512
1086[ 1.135279] register_client_adhoc:Client handle 59 mdss_sde
1087[ 1.135317] sde: sde1 sde2 sde3 sde4 sde5 sde6 sde7 sde8 sde9 sde10 sde11 sde12 sde13 sde14 sde15 sde16 sde17 sde18 sde19 sde20 sde21 sde22 sde23 sde24 sde25 sde26 sde27 sde28 sde29 sde30 sde31 sde32 sde33 sde34 sde35 sde36 sde37 sde38 sde39 sde40 sde41 sde42 sde43 sde44 sde45 sde46 sde47 sde48 sde49 sde50 sde51 sde52 sde53 sde54
1088[ 1.135330] [drm:sde_dbg_init:5138] evtlog_status: enable:3, panic:0, dump:1
1089[ 1.135341] msm_drm ae00000.qcom,mdss_mdp: bound af20000.qcom,sde_rscc (ops sde_rsc_comp_ops)
1090[ 1.135347] msm_drm ae00000.qcom,mdss_mdp: bound soc:qcom,wb-display@0 (ops sde_wb_comp_ops)
1091[ 1.135350] msm_drm ae00000.qcom,mdss_mdp: bound ae90000.qcom,dp_display (ops dp_display_comp_ops)
1092[ 1.135463] msm-dsi-display:[dsi_display_bind] Successfully bind display panel 'dsi_samsung_fhd_ea8076_f1p2_cmd_display'
1093[ 1.135588] msm_drm ae00000.qcom,mdss_mdp: bound soc:qcom,dsi-display-primary (ops dsi_display_comp_ops)
1094[ 1.135593] msm_drm ae00000.qcom,mdss_mdp: bound soc:qcom,dsi-display-secondary (ops dsi_display_comp_ops)
1095[ 1.135605] [drm] mapped mdp address space @ffffff8017600000
1096[ 1.135638] msm_drm ae00000.qcom,mdss_mdp: failed to get memory resource: vbif_nrt_phys
1097[ 1.135663] [drm:_sde_kms_get_splash_data:3093] splash mem num_regions:1
1098[ 1.135669] [drm:_sde_kms_get_splash_data:3128] splash mem for disp:1 add:9c000000 size:2400000
1099[ 1.136075] [drm:sde_kms_hw_init:3254] sde hardware revision:0x50000001
1100[ 1.136523] [drm] Created domain mdp_ns [20000,fffe0000] secure=0
1101[ 1.137316] iommu: Adding device ae00000.qcom,mdss_mdp:qcom,smmu_sde_sec_cb to group 53
1102[ 1.137323] [drm] probing device qcom,smmu_sde_sec
1103[ 1.137326] [drm] Created domain mdp_s [20000,fffe0000] secure=1
1104[ 1.139210] [drm:sde_connector_init:2295] sde_connector_init: Request esd irq succeed!
1105[ 1.139370] [drm-dp] dp_parser_get_vreg: no supply entry present: ???
1106[ 1.139372] [drm-dp] dp_parser_get_vreg: no supply entry present: ???
1107[ 1.139374] [drm-dp] dp_parser_get_vreg: no supply entry present: ???
1108[ 1.139652] [drm-dp] dp_aux_get: invalid input
1109[ 1.139654] [drm-dp] dp_init_sub_modules: failed to initialize aux, rc = -19
1110[ 1.139659] [drm:sde_connector_init:2244] [sde error]post-init failed, -19
1111[ 1.139664] [drm-dp-mst]: dp_mst_drm_bridge_init: mst not initialized. cache encoder information
1112[ 1.139667] [drm-dp-mst]: dp_mst_drm_bridge_init: mst not initialized. cache encoder information
1113[ 1.141403] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
1114[ 1.141405] [drm] No driver support for vblank timestamp query.
1115[ 1.141763] [drm] Initialized msm_drm 1.2.0 20130625 for ae00000.qcom,mdss_mdp on minor 0
1116[ 1.141799] msm-dsi-panel:[dsi_panel_parse_topology:2754] default topology: lm: 1 comp_enc:0 intf: 1
1117[ 1.141901] msm-dsi-panel:[dsi_panel_parse_partial_update_caps:2844] partial update disabled as the property is not set
1118[ 1.141957] dsi-ctrl:[_dsi_ctrl_setup_isr] [DSI_0] IRQ 637 registered
1119[ 1.160624] sde_mdp_parse_dt_prop_len: <SDEROT_INFO> prop qcom,mdss-inline-rot-qos-lut : doesn't exist in device tree
1120[ 1.160627] sde_mdp_parse_dt_prop_len: <SDEROT_INFO> prop qcom,mdss-inline-rot-danger-lut : doesn't exist in device tree
1121[ 1.160630] sde_mdp_parse_dt_prop_len: <SDEROT_INFO> prop qcom,mdss-inline-rot-safe-lut : doesn't exist in device tree
1122[ 1.160651] register_client_adhoc:find path.src 1 dest 590
1123[ 1.160746] register_client_adhoc:Client handle 60 sde_reg
1124[ 1.160822] iommu: Adding device ae00000.qcom,mdss_rotator:qcom,smmu_rot_unsec_cb to group 54
1125[ 1.160832] sde_smmu_probe: <SDEROT_INFO> iommu v2 domain[0] mapping and clk register successful!
1126[ 1.160887] iommu: Adding device ae00000.qcom,mdss_rotator:qcom,smmu_rot_sec_cb to group 55
1127[ 1.160892] sde_smmu_probe: <SDEROT_INFO> iommu v2 domain[1] mapping and clk register successful!
1128[ 1.160923] register_client_adhoc:find path.src 25 dest 512
1129[ 1.160999] register_client_adhoc:Client handle 61 mdss_rotator
1130[ 1.161004] register_client_adhoc:find path.src 1 dest 590
1131[ 1.161078] register_client_adhoc:Client handle 62 mdss_rot_reg
1132[ 1.161280] No change in context(0==0), skip
1133[ 1.162045] sde_rotator_evtlog_create_debugfs: evtlog_status: enable:1, panic:0, dump:1
1134[ 1.162950] sde_rotator ae00000.qcom,mdss_rotator: <SDEROT_INFO> SDE v4l2 rotator probe success
1135[ 1.163253] iommu: Adding device 171c0000.slim:qcom,iommu_slim_ctrl_cb to group 56
1136[ 1.163889] iommu: Adding device 17240000.slim:qcom,iommu_slim_ctrl_cb to group 57
1137[ 1.164847] input: gpio-keys as /devices/platform/soc/soc:gpio_keys/input/input3
1138[ 1.165101] [ FTS ] fts_probe: driver ver: 5.2.4
1139[ 1.165108] [ FTS ] parse_dt:tp vendor: 72
1140[ 1.165109] [ FTS ] Unable to read tp color
1141[ 1.165112] [ FTS ] Unable to read tp hw version
1142[ 1.165114] [ FTS ] parse_dt:fw_name: st_fts_f1.ftb
1143[ 1.165114] [ FTS ] parse_dt:limit_name: stm_fts_production_limits.csv
1144[ 1.165117] fts 2-0049: fts+sdc
1145[ 1.175467] input: fts as /devices/platform/soc/c80000.i2c/i2c-2/2-0049/input/input4
1146[ 1.175486] [ FTS ] System resetting...
1147[ 1.188177] [ FTS ] System reset DONE!
1148[ 1.194136] [ FTS ] FW VER = 0047
1149[ 1.194137] [ FTS ] SVN REV = 2117
1150[ 1.194139] [ FTS ] CONFIG VER = 0032
1151[ 1.194141] [ FTS ] CONFIG PROJECT ID = 003E
1152[ 1.194142] [ FTS ] CX VER = FFFF
1153[ 1.194144] [ FTS ] CX PROJECT ID = 003E
1154[ 1.194146] [ FTS ] AFE VER: CFG = 03 - CX = 03 - PANEL = 03
1155[ 1.194151] [ FTS ] Release Info =
1156[ 1.194154] [ FTS ] fts_probe create secure touch file...
1157[ 1.194156] [ FTS ] fts_secure_init
1158[ 1.194159] [ FTS ] fts_probe create secure touch file successful
1159[ 1.194161] [ FTS ] fts_secure_stop SECURE_STOP: block = 1
1160[ 1.194163] [ FTS ] fts_secure_stop secure touch is already disabled
1161[ 1.207126] [ FTS ] Echo FOUND... OK!
1162[ 1.208149] [ FTS ] fts_get_lockdown_info signature:A5 id:01 70 beforecnt:1,aftercnt:1
1163[ 1.210040] idtp9220 0-003b: usb present:0 typec mode:0
1164[ 1.221108] [ FTS ] Echo FOUND... OK!
1165[ 1.222133] [ FTS ] fts_get_lockdown_info signature:A5 id:01 70 beforecnt:1,aftercnt:1
1166[ 1.222137] [ FTS ] Interrupt Enabled!
1167[ 1.222139] [ FTS ] Lockdown:0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00
1168[ 1.222141] [ FTS ] FW Update and Sensing Initialization:
1169[ 1.222144] [ FTS ] Fw Auto Update is starting...
1170[ 1.222482] [ FTS ] fts_crc_check: Verifying if Config CRC Error...
1171[ 1.222483] [ FTS ] System resetting...
1172[ 1.234904] [ FTS ] System reset DONE!
1173[ 1.234906] [ FTS ] fts_crc_check: No Config CRC Error Found!
1174[ 1.234908] [ FTS ] fts_crc_check: Verifying if Cx CRC Error...
1175[ 1.234910] [ FTS ] fts_crc_check: No Cx CRC Error Found!
1176[ 1.234912] [ FTS ] fts_fw_update: NO CRC Error or Impossible to read CRC register!
1177[ 1.234914] [ FTS ] fts_get_lockdown_info aleady get,skip
1178[ 1.234916] [ FTS ] Interrupt Enabled!
1179[ 1.234918] [ FTS ] can't find right config
1180[ 1.234919] [ FTS ] getFWdata starting ...
1181[ 1.234922] [ FTS ] Read FW from BIN file st_fts_f1.ftb !
1182[ 1.234936] [ FTS ] getFWdata Finished!
1183[ 1.234938] [ FTS ] parseBinFile: FILE SVN REV = 00002036
1184[ 1.234939] [ FTS ] parseBinFile: FILE Fw Version = 0045
1185[ 1.234941] [ FTS ] parseBinFile: FILE Config Project ID = 0000003E
1186[ 1.234943] [ FTS ] parseBinFile: FILE Config Version = 00000030
1187[ 1.234945] [ FTS ] parseBinFile: File External Release =
1188[ 1.234946] 30
1189[ 1.234947] F1
1190[ 1.234949] 00
1191[ 1.234950] 00
1192[ 1.234952] 00
1193[ 1.234953] 00
1194[ 1.234955] 00
1195[ 1.234956] 00
1196[ 1.234957]
1197[ 1.234960] [ FTS ] parseBinFile: sec0_size = 00019AC0 (105152 bytes)
1198[ 1.234963] [ FTS ] parseBinFile: sec1_size = 00000BA8 (2984 bytes)
1199[ 1.234964] [ FTS ] parseBinFile: sec2_size = 00000000 (0 bytes)
1200[ 1.234966] [ FTS ] parseBinFile: sec3_size = 00000000 (0 bytes)
1201[ 1.234976] [ FTS ] parseBinFile: Initialize cx_ver to default value!
1202[ 1.234978] [ FTS ] parseBinFile: CX Version = FFFF
1203[ 1.234981] [ FTS ] System resetting...
1204[ 1.247403] [ FTS ] System reset DONE!
1205[ 1.279790] usbpd usbpd0: Type-C Sink connected
1206[ 1.279813] USB_ICL: current vote is now 0 voted by OTG_VOTER,7, previous voted 100000
1207[ 1.279835] icl_ua value is: 0
1208[ 1.279891] CP_ILIM: current vote is now 0 voted by ICL_CHANGE_VOTER,1, previous voted 2400000
1209[ 1.279896] SMB1390: smb1390_ilim_vote_cb: ILIM 0uA is too low to allow charging
1210[ 1.279952] pm8150b_charger: smblib_get_prop_typec_power_role: TYPE_C_MODE_CFG_REG = 0x10
1211[ 1.280051] [ FTS ] fts_writeU8UX: cmd[1] = 20
1212[ 1.280053] [ FTS ] fts_writeU8UX: cmd[2] = 00
1213[ 1.280055] [ FTS ] fts_writeU8UX: cmd[3] = 00
1214[ 1.280057] [ FTS ] fts_writeU8UX: cmd[4] = 24
1215[ 1.280604] FG: status_change_work: charge_status:2 charge_type:1 charge_done:0
1216[ 1.281001] pm8150b_charger: smblib_get_prop_typec_power_role: TYPE_C_MODE_CFG_REG = 0x10
1217[ 1.281486] FG: status_change_work: charge_status:2 charge_type:1 charge_done:0
1218[ 1.407445] pm8150b_charger: smblib_set_prop_typec_power_role: set power_role to 0x10
1219[ 1.407451] pm8150b_charger: smblib_masked_write: set 0x1544 mask:0x1f,val:0x10
1220[ 1.409437] write 0x84 to 0x70
1221[ 1.409443] write 0x2c to 0x74
1222[ 1.460803] msm-dwc3 a600000.ssusb: DWC3 exited from low power mode
1223[ 1.461026] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller
1224[ 1.461046] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 1
1225[ 1.461301] xhci-hcd xhci-hcd.0.auto: hcc params 0x0230ffe5 hci version 0x110 quirks 0x00010010
1226[ 1.461315] xhci-hcd xhci-hcd.0.auto: irq 550, io mem 0x0a600000
1227[ 1.461561] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
1228[ 1.461569] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
1229[ 1.461576] usb usb1: Product: xHCI Host Controller
1230[ 1.461583] usb usb1: Manufacturer: Linux 4.14.83-perf-gb6d3259c1-dirty xhci-hcd
1231[ 1.461589] usb usb1: SerialNumber: xhci-hcd.0.auto
1232[ 1.461810] hub 1-0:1.0: USB hub found
1233[ 1.461855] hub 1-0:1.0: 1 port detected
1234[ 1.462082] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller
1235[ 1.462093] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 2
1236[ 1.462103] xhci-hcd xhci-hcd.0.auto: Host supports USB 3.10 Enhanced SuperSpeed
1237[ 1.462215] usb usb2: We don't know the algorithms for LPM for this host, disabling LPM.
1238[ 1.462476] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003
1239[ 1.462483] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
1240[ 1.462490] usb usb2: Product: xHCI Host Controller
1241[ 1.462496] usb usb2: Manufacturer: Linux 4.14.83-perf-gb6d3259c1-dirty xhci-hcd
1242[ 1.462502] usb usb2: SerialNumber: xhci-hcd.0.auto
1243[ 1.462719] hub 2-0:1.0: USB hub found
1244[ 1.462760] hub 2-0:1.0: 1 port detected
1245[ 1.790055] usb 1-1: new low-speed USB device number 2 using xhci-hcd
1246[ 1.943098] usb 1-1: New USB device found, idVendor=0000, idProduct=0538
1247[ 1.943106] usb 1-1: New USB device strings: Mfr=0, Product=1, SerialNumber=0
1248[ 1.943112] usb 1-1: Product: USB OPTICAL MOUSE
1249[ 1.952280] input: USB OPTICAL MOUSE as /devices/platform/soc/a600000.ssusb/a600000.dwc3/xhci-hcd.0.auto/usb1/1-1/1-1:1.0/0003:0000:0538.0001/input/input5
1250[ 1.952320] hid-generic 0003:0000:0538.0001: input: USB HID v1.11 Mouse [ USB OPTICAL MOUSE] on usb-xhci-hcd.0.auto-1/input0
1251[ 3.040064] of_batterydata_get_best_profile: f1_atl found
1252[ 3.040072] QCOM-STEPCHG: get_config_work: jeita-fcc-cfg: 0decidegree ~ 50decidegre, 300000uA
1253[ 3.040074] QCOM-STEPCHG: get_config_work: jeita-fcc-cfg: 51decidegree ~ 100decidegre, 1600000uA
1254[ 3.040077] QCOM-STEPCHG: get_config_work: jeita-fcc-cfg: 101decidegree ~ 150decidegre, 3200000uA
1255[ 3.040079] QCOM-STEPCHG: get_config_work: jeita-fcc-cfg: 151decidegree ~ 450decidegre, 4800000uA
1256[ 3.040081] QCOM-STEPCHG: get_config_work: jeita-fcc-cfg: 451decidegree ~ 580decidegre, 1600000uA
1257[ 3.040084] QCOM-STEPCHG: get_config_work: jeita-fv-cfg: 0decidegree ~ 50decidegre, 4400000uV
1258[ 3.040086] QCOM-STEPCHG: get_config_work: jeita-fv-cfg: 51decidegree ~ 100decidegre, 4400000uV
1259[ 3.040088] QCOM-STEPCHG: get_config_work: jeita-fv-cfg: 101decidegree ~ 150decidegre, 4400000uV
1260[ 3.040090] QCOM-STEPCHG: get_config_work: jeita-fv-cfg: 151decidegree ~ 450decidegre, 4400000uV
1261[ 3.040092] QCOM-STEPCHG: get_config_work: jeita-fv-cfg: 451decidegree ~ 580decidegre, 4100000uV
1262[ 3.040094] QCOM-STEPCHG: get_config_work: dynamic-fv-cfg: 0(count) ~ 100(count), 4400000uV
1263[ 3.040096] QCOM-STEPCHG: get_config_work: dynamic-fv-cfg: 101(count) ~ 200(count), 4380000uV
1264[ 3.040098] QCOM-STEPCHG: get_config_work: dynamic-fv-cfg: 201(count) ~ 300(count), 4360000uV
1265[ 3.040100] QCOM-STEPCHG: get_config_work: dynamic-fv-cfg: 301(count) ~ 400(count), 4340000uV
1266[ 3.040102] QCOM-STEPCHG: get_config_work: dynamic-fv-cfg: 401(count) ~ 500(count), 4340000uV
1267[ 4.000057] idtp9220 0-003b: [idt] enter idtp9220_chg_detect_work
1268[ 4.000097] idtp9220 0-003b: [idt] dc_online 0
1269[ 5.180963] [ FTS ] load program DONE!
1270[ 5.338580] [ FTS ] load config DONE!
1271[ 5.338583] [ FTS ] System resetting...
1272[ 5.351007] [ FTS ] System reset DONE!
1273[ 5.356964] [ FTS ] FW VER = 0039
1274[ 5.356966] [ FTS ] SVN REV = 1926
1275[ 5.356967] [ FTS ] CONFIG VER = 0025
1276[ 5.356970] [ FTS ] CONFIG PROJECT ID = 003E
1277[ 5.356971] [ FTS ] CX VER = FFFF
1278[ 5.356973] [ FTS ] CX PROJECT ID = 003E
1279[ 5.356975] [ FTS ] AFE VER: CFG = 03 - CX = 03 - PANEL = 03
1280[ 5.356979] [ FTS ] Release Info =
1281[ 5.356981] [ FTS ] Firmware in the chip different from the one that was burn!
1282[ 5.356983] [ FTS ] flashProcedure: ERROR 82000000
1283[ 5.356987] [ FTS ] fts_fw_update: firmware update failed and retry! ERROR 82080000
1284[ 5.356989] [ FTS ] fts_chip_powercycle: Power Cycle Starting...
1285[ 5.356991] [ FTS ] fts_chip_powercycle: Disabling IRQ...
1286[ 5.377371] [ FTS ] fts_chip_powercycle: Power Cycle Finished! ERROR CODE = 00000000
1287[ 5.377373] [ FTS ] getFWdata starting ...
1288[ 5.377375] [ FTS ] Read FW from BIN file st_fts_f1.ftb !
1289[ 5.377385] [ FTS ] getFWdata Finished!
1290[ 5.377387] [ FTS ] parseBinFile: FILE SVN REV = 00002036
1291[ 5.377389] [ FTS ] parseBinFile: FILE Fw Version = 0045
1292[ 5.377391] [ FTS ] parseBinFile: FILE Config Project ID = 0000003E
1293[ 5.377392] [ FTS ] parseBinFile: FILE Config Version = 00000030
1294[ 5.377394] [ FTS ] parseBinFile: File External Release =
1295[ 5.377395] 30
1296[ 5.377396] F1
1297[ 5.377397] 00
1298[ 5.377399] 00
1299[ 5.377400] 00
1300[ 5.377402] 00
1301[ 5.377403] 00
1302[ 5.377405] 00
1303[ 5.377406]
1304[ 5.377409] [ FTS ] parseBinFile: sec0_size = 00019AC0 (105152 bytes)
1305[ 5.377411] [ FTS ] parseBinFile: sec1_size = 00000BA8 (2984 bytes)
1306[ 5.377413] [ FTS ] parseBinFile: sec2_size = 00000000 (0 bytes)
1307[ 5.377415] [ FTS ] parseBinFile: sec3_size = 00000000 (0 bytes)
1308[ 5.377425] [ FTS ] parseBinFile: Initialize cx_ver to default value!
1309[ 5.377426] [ FTS ] parseBinFile: CX Version = FFFF
1310[ 5.377429] [ FTS ] System resetting...
1311[ 5.387517] i2c_geni c80000.i2c: GSI QN err:0x0, status:0x3ea, err:2
1312[ 5.387529] i2c_geni c80000.i2c: GSI QN err:0x0, status:0x3ea, err:2
1313[ 5.389821] i2c_geni c80000.i2c: GSI QN err:0x0, status:0x3ea, err:2
1314[ 5.389833] i2c_geni c80000.i2c: GSI QN err:0x0, status:0x3ea, err:2
1315[ 5.392132] i2c_geni c80000.i2c: GSI QN err:0x0, status:0x3ea, err:2
1316[ 5.392143] i2c_geni c80000.i2c: GSI QN err:0x0, status:0x3ea, err:2
1317[ 5.394323] [ FTS ] fts_writeRead: ERROR 80000004
1318[ 5.394325] [ FTS ] fts_writeReadU8UX: read error... ERROR 80000004
1319[ 5.394327] [ FTS ] pollForEvent: ERROR 80000002
1320[ 5.394329] [ FTS ] fts_system_reset: ERROR 80000002
1321[ 5.404445] i2c_geni c80000.i2c: GSI QN err:0x0, status:0x3ea, err:2
1322[ 5.404456] i2c_geni c80000.i2c: GSI QN err:0x0, status:0x3ea, err:2
1323[ 5.406744] i2c_geni c80000.i2c: GSI QN err:0x0, status:0x3ea, err:2
1324[ 5.406756] i2c_geni c80000.i2c: GSI QN err:0x0, status:0x3ea, err:2
1325[ 5.409042] i2c_geni c80000.i2c: GSI QN err:0x0, status:0x3ea, err:2
1326[ 5.409053] i2c_geni c80000.i2c: GSI QN err:0x0, status:0x3ea, err:2
1327[ 5.411229] [ FTS ] fts_writeRead: ERROR 80000004
1328[ 5.411231] [ FTS ] fts_writeReadU8UX: read error... ERROR 80000004
1329[ 5.411232] [ FTS ] pollForEvent: ERROR 80000002
1330[ 5.411234] [ FTS ] fts_system_reset: ERROR 80000002
1331[ 5.421350] i2c_geni c80000.i2c: GSI QN err:0x0, status:0x3ea, err:2
1332[ 5.421361] i2c_geni c80000.i2c: GSI QN err:0x0, status:0x3ea, err:2
1333[ 5.423648] i2c_geni c80000.i2c: GSI QN err:0x0, status:0x3ea, err:2
1334[ 5.423660] i2c_geni c80000.i2c: GSI QN err:0x0, status:0x3ea, err:2
1335[ 5.425946] i2c_geni c80000.i2c: GSI QN err:0x0, status:0x3ea, err:2
1336[ 5.425957] i2c_geni c80000.i2c: GSI QN err:0x0, status:0x3ea, err:2
1337[ 5.428133] [ FTS ] fts_writeRead: ERROR 80000004
1338[ 5.428135] [ FTS ] fts_writeReadU8UX: read error... ERROR 80000004
1339[ 5.428136] [ FTS ] pollForEvent: ERROR 80000002
1340[ 5.428138] [ FTS ] fts_system_reset: ERROR 80000002
1341[ 5.428140] [ FTS ] fts_system_reset...failed after 3 attempts: ERROR 80000B02
1342[ 5.428142] [ FTS ] system reset FAILED!
1343[ 5.428144] [ FTS ] flashProcedure: ERROR 82000000
1344[ 5.428146] [ FTS ] fts_fw_update: firmware update failed again! ERROR 82080B02
1345[ 5.428148] [ FTS ] Fw Auto Update Failed!
1346[ 5.428149] [ FTS ] fts_fw_update: Verifying if CX CRC Error...
1347[ 5.428151] [ FTS ] System resetting...
1348[ 5.438266] i2c_geni c80000.i2c: GSI QN err:0x0, status:0x3ea, err:2
1349[ 5.438276] i2c_geni c80000.i2c: GSI QN err:0x0, status:0x3ea, err:2
1350[ 5.440562] i2c_geni c80000.i2c: GSI QN err:0x0, status:0x3ea, err:2
1351[ 5.440573] i2c_geni c80000.i2c: GSI QN err:0x0, status:0x3ea, err:2
1352[ 5.442861] i2c_geni c80000.i2c: GSI QN err:0x0, status:0x3ea, err:2
1353[ 5.442873] i2c_geni c80000.i2c: GSI QN err:0x0, status:0x3ea, err:2
1354[ 5.445051] [ FTS ] fts_writeRead: ERROR 80000004
1355[ 5.445053] [ FTS ] fts_writeReadU8UX: read error... ERROR 80000004
1356[ 5.445055] [ FTS ] pollForEvent: ERROR 80000002
1357[ 5.445056] [ FTS ] fts_system_reset: ERROR 80000002
1358[ 5.455171] i2c_geni c80000.i2c: GSI QN err:0x0, status:0x3ea, err:2
1359[ 5.455182] i2c_geni c80000.i2c: GSI QN err:0x0, status:0x3ea, err:2
1360[ 5.457468] i2c_geni c80000.i2c: GSI QN err:0x0, status:0x3ea, err:2
1361[ 5.457480] i2c_geni c80000.i2c: GSI QN err:0x0, status:0x3ea, err:2
1362[ 5.459766] i2c_geni c80000.i2c: GSI QN err:0x0, status:0x3ea, err:2
1363[ 5.459778] i2c_geni c80000.i2c: GSI QN err:0x0, status:0x3ea, err:2
1364[ 5.461956] [ FTS ] fts_writeRead: ERROR 80000004
1365[ 5.461958] [ FTS ] fts_writeReadU8UX: read error... ERROR 80000004
1366[ 5.461960] [ FTS ] pollForEvent: ERROR 80000002
1367[ 5.461962] [ FTS ] fts_system_reset: ERROR 80000002
1368[ 5.472076] i2c_geni c80000.i2c: GSI QN err:0x0, status:0x3ea, err:2
1369[ 5.472088] i2c_geni c80000.i2c: GSI QN err:0x0, status:0x3ea, err:2
1370[ 5.474374] i2c_geni c80000.i2c: GSI QN err:0x0, status:0x3ea, err:2
1371[ 5.474385] i2c_geni c80000.i2c: GSI QN err:0x0, status:0x3ea, err:2
1372[ 5.476670] i2c_geni c80000.i2c: GSI QN err:0x0, status:0x3ea, err:2
1373[ 5.476681] i2c_geni c80000.i2c: GSI QN err:0x0, status:0x3ea, err:2
1374[ 5.478858] [ FTS ] fts_writeRead: ERROR 80000004
1375[ 5.478860] [ FTS ] fts_writeReadU8UX: read error... ERROR 80000004
1376[ 5.478862] [ FTS ] pollForEvent: ERROR 80000002
1377[ 5.478863] [ FTS ] fts_system_reset: ERROR 80000002
1378[ 5.478865] [ FTS ] fts_system_reset...failed after 3 attempts: ERROR 80000B02
1379[ 5.478867] [ FTS ] fts_fw_update: Error while executing system reset! ERROR 80000B02
1380[ 5.478869] [ FTS ] Interrupt Mode
1381[ 5.479048] [ FTS ] fts_mode_handler: Screen ON...
1382[ 5.479051] [ FTS ] fts_mode_handler: Sense ON
1383[ 5.479164] i2c_geni c80000.i2c: GSI QN err:0x0, status:0x3ea, err:2
1384[ 5.479175] i2c_geni c80000.i2c: GSI QN err:0x0, status:0x3ea, err:2
1385[ 5.481463] i2c_geni c80000.i2c: GSI QN err:0x0, status:0x3ea, err:2
1386[ 5.481474] i2c_geni c80000.i2c: GSI QN err:0x0, status:0x3ea, err:2
1387[ 5.483761] i2c_geni c80000.i2c: GSI QN err:0x0, status:0x3ea, err:2
1388[ 5.483771] i2c_geni c80000.i2c: GSI QN err:0x0, status:0x3ea, err:2
1389[ 5.485947] [ FTS ] fts_write: ERROR 80000003
1390[ 5.485949] [ FTS ] setScanMode: write failed...ERROR 80000003 !
1391[ 5.486062] i2c_geni c80000.i2c: GSI QN err:0x0, status:0x3ea, err:2
1392[ 5.486074] i2c_geni c80000.i2c: GSI QN err:0x0, status:0x3ea, err:2
1393[ 5.488361] i2c_geni c80000.i2c: GSI QN err:0x0, status:0x3ea, err:2
1394[ 5.488372] i2c_geni c80000.i2c: GSI QN err:0x0, status:0x3ea, err:2
1395[ 5.490660] i2c_geni c80000.i2c: GSI QN err:0x0, status:0x3ea, err:2
1396[ 5.490671] i2c_geni c80000.i2c: GSI QN err:0x0, status:0x3ea, err:2
1397[ 5.492847] [ FTS ] fts_write: ERROR 80000003
1398[ 5.492850] [ FTS ] setScanMode: write failed...ERROR 80000003 !
1399[ 5.543071] [ FTS ] Interrupt Enabled!
1400[ 5.543074] [ FTS ] fts_init_sensing Init after Probe error (ERROR = 80000903)
1401[ 5.543076] [ FTS ] Cannot initialize the hardware device ERROR 80000903
1402[ 5.543077] [ FTS ] Fw Update Finished! error = 80000903
1403[ 5.543079] [ FTS ] Cannot execute fw upgrade the device ERROR 80000903
1404[ 5.543197] [ FTS ] Probe Failed!
1405[ 5.543252] qcom,qpnp-rtc c440000.qcom,spmi:qcom,pm8150@0:qcom,pm8150_rtc: setting system clock to 1970-03-04 02:20:58 UTC (5365258)
1406[ 5.600387] lpm_levels: register_cluster_lpm_stats()
1407[ 5.600429] lpm_levels: register_cluster_lpm_stats()
1408[ 5.602137] rmnet_ipa3 started initialization
1409[ 5.602253] RNDIS_IPA module is loaded.
1410[ 5.602825] msm_bus_late_init: Remove handoff bw requests
1411[ 5.603407] hlos1_vote_aggre_noc_mmu_audio_tbu_gdsc: disabling
1412[ 5.603515] hlos1_vote_aggre_noc_mmu_tbu1_gdsc: disabling
1413[ 5.603622] hlos1_vote_aggre_noc_mmu_tbu2_gdsc: disabling
1414[ 5.603730] hlos1_vote_aggre_noc_mmu_pcie_tbu_gdsc: disabling
1415[ 5.603843] camera_viodd_ldo: disabling
1416[ 5.603844] actuator_rear_regulator: disabling
1417[ 5.603846] actuator_rear_aux_ldo: disabling
1418[ 5.603848] actuator_ultra_ldo: disabling
1419[ 5.603850] disp_vddio_vreg: disabling
1420[ 5.605473] regulator_proxy_consumer_remove_all: removing regulator proxy consumer requests
1421[ 5.605519] ALSA device list:
1422[ 5.605521] No soundcards found.
1423[ 5.605537] Warning: unable to open an initial console.
1424[ 5.606542] Freeing unused kernel memory: 6144K
1425[ 5.607507] init: init first stage started!
1426[ 5.607516] init: First stage mount skipped (recovery mode)
1427[ 5.607561] init: Using Android DT directory /proc/device-tree/firmware/android/
1428[ 5.607717] init: [libfs_mgr]dt_fstab: Skip disabled entry for partition ifaa
1429[ 5.607791] init: [libfs_mgr]Error parsing mount_flags
1430[ 5.607796] init: [libfs_mgr]fs_mgr_read_fstab(): failed to load fstab from : '/etc/recovery.fstab'
1431[ 5.607860] init: [libfs_mgr]dt_fstab: Skip disabled entry for partition ifaa
1432[ 5.613119] i2c_geni 890000.i2c: i2c error :-107
1433[ 5.613200] i2c_geni 890000.i2c: i2c error :-107
1434[ 5.613202] idtp9220 0-003b: vout regulator get vol: 52992
1435[ 5.631839] init: [libfs_mgr]Returning avb_handle with status: 3
1436[ 5.631895] init: Loading SELinux policy
1437[ 5.633316] SELinux: 8192 avtab hash slots, 16624 rules.
1438[ 5.635010] SELinux: 8192 avtab hash slots, 16624 rules.
1439[ 5.635012] SELinux: 1 users, 2 roles, 1327 types, 0 bools, 1 sens, 1024 cats
1440[ 5.635015] SELinux: 93 classes, 16624 rules
1441[ 5.635518] SELinux: Class process2 not defined in policy.
1442[ 5.635623] SELinux: Class infiniband_pkey not defined in policy.
1443[ 5.635625] SELinux: Class infiniband_endport not defined in policy.
1444[ 5.635628] SELinux: the above unknown classes and permissions will be denied
1445[ 5.635633] SELinux: policy capability network_peer_controls=1
1446[ 5.635635] SELinux: policy capability open_perms=1
1447[ 5.635637] SELinux: policy capability extended_socket_class=1
1448[ 5.635638] SELinux: policy capability always_check_network=0
1449[ 5.635640] SELinux: policy capability cgroup_seclabel=0
1450[ 5.635642] SELinux: policy capability nnp_nosuid_transition=0
1451[ 5.635644] SELinux: Completing initialization.
1452[ 5.635644] SELinux: Setting up existing superblocks.
1453[ 5.663590] audit: type=1403 audit(5365258.609:2): policy loaded auid=4294967295 ses=4294967295
1454[ 5.663644] selinux: SELinux: Loaded policy from /sepolicy
1455[ 5.663644]
1456[ 5.664579] init: 1 output lines suppressed due to ratelimiting
1457[ 5.665230] init: init second stage started!
1458[ 5.667036] init: Using Android DT directory /proc/device-tree/firmware/android/
1459[ 5.667674] selinux: SELinux: Loaded file_contexts
1460[ 5.667674]
1461[ 5.667679] init: Running restorecon...
1462[ 5.669107] init: waitid failed: No child processes
1463[ 5.669123] init: Couldn't load property file '/system/etc/prop.default': open() failed: No such file or directory: No such file or directory
1464[ 5.669333] init: Unable to set property 'ro.boot.avb_version' to '1.0' in property file '/prop.default': Read-only property was already set
1465[ 5.669386] init: Couldn't load property file '/product/build.prop': open() failed: No such file or directory: No such file or directory
1466[ 5.669392] init: Couldn't load property file '/odm/default.prop': open() failed: No such file or directory: No such file or directory
1467[ 5.669399] init: Couldn't load property file '/vendor/default.prop': open() failed: No such file or directory: No such file or directory
1468[ 5.670724] audit: type=1400 audit(5365258.619:3): avc: denied { setcheckreqprot } for pid=1 comm="init" scontext=u:r:init:s0 tcontext=u:object_r:kernel:s0 tclass=security permissive=1
1469[ 5.671018] audit: type=1400 audit(5365258.619:4): avc: denied { dac_read_search } for pid=1 comm="init" capability=2 scontext=u:r:init:s0 tcontext=u:r:init:s0 tclass=capability permissive=1
1470[ 5.671025] audit: type=1400 audit(5365258.619:5): avc: denied { create } for pid=1 comm="init" name="cgroup.procs" scontext=u:r:init:s0 tcontext=u:object_r:rootfs:s0 tclass=file permissive=1
1471[ 5.671032] audit: type=1400 audit(5365258.619:6): avc: denied { write } for pid=1 comm="init" path="/acct/uid_0/pid_535/cgroup.procs" dev="rootfs" ino=27766 scontext=u:r:init:s0 tcontext=u:object_r:rootfs:s0 tclass=file permissive=1
1472[ 5.673002] ueventd: ueventd started!
1473[ 5.673791] audit: type=1400 audit(5365258.619:7): avc: denied { map } for pid=534 comm="init" path="/plat_file_contexts" dev="rootfs" ino=13159 scontext=u:r:vendor_init:s0 tcontext=u:object_r:file_contexts_file:s0 tclass=file permissive=1
1474[ 5.674485] selinux: SELinux: Loaded file_contexts
1475[ 5.674485]
1476[ 5.674527] ueventd: Parsing file /ueventd.rc...
1477[ 5.674947] ueventd: Parsing file /vendor/ueventd.rc...
1478[ 5.674971] ueventd: Unable to read config file '/vendor/ueventd.rc': open() failed: No such file or directory
1479[ 5.674989] ueventd: Parsing file /odm/ueventd.rc...
1480[ 5.675009] ueventd: Unable to read config file '/odm/ueventd.rc': open() failed: No such file or directory
1481[ 5.675060] ueventd: Parsing file /ueventd.qcom.rc...
1482[ 5.676516] ueventd: [libfs_mgr]Error parsing mount_flags
1483[ 5.676534] ueventd: [libfs_mgr]fs_mgr_read_fstab(): failed to load fstab from : '/etc/recovery.fstab'
1484[ 5.695933] i2c_geni 890000.i2c: i2c error :-107
1485[ 5.696026] i2c_geni 890000.i2c: i2c error :-107
1486[ 5.696033] idtp9220 0-003b: vout regulator get vol: 39168
1487[ 5.728745] i2c_geni 890000.i2c: i2c error :-107
1488[ 5.728828] i2c_geni 890000.i2c: i2c error :-107
1489[ 5.728832] idtp9220 0-003b: vout regulator get vol: 0
1490[ 5.728912] i2c_geni 890000.i2c: i2c error :-107
1491[ 5.728989] i2c_geni 890000.i2c: i2c error :-107
1492[ 5.728991] idtp9220 0-003b: vout regulator get vol: 0
1493[ 5.732682] i2c_geni 890000.i2c: i2c error :-107
1494[ 5.732760] i2c_geni 890000.i2c: i2c error :-107
1495[ 5.732763] idtp9220 0-003b: vout regulator get vol: 0
1496[ 5.733511] pm8150b_charger: smblib_get_prop_typec_power_role: TYPE_C_MODE_CFG_REG = 0x10
1497[ 5.802570] audit: type=1400 audit(5365258.749:8): avc: denied { setattr } for pid=1 comm="init" name="system" dev="rootfs" ino=13517 scontext=u:r:init:s0 tcontext=u:object_r:rootfs:s0 tclass=lnk_file permissive=1
1498[ 5.807436] audit: type=1400 audit(5365258.749:9): avc: denied { module_request } for pid=1 comm="init" kmod="fs-functionfs" scontext=u:r:init:s0 tcontext=u:r:kernel:s0 tclass=system permissive=1
1499[ 5.809640] audit: type=1400 audit(5365258.749:10): avc: denied { entrypoint } for pid=547 comm="init" path="/sbin/logd" dev="rootfs" ino=13370 scontext=u:r:logd:s0 tcontext=u:object_r:rootfs:s0 tclass=file permissive=1
1500[ 5.809951] audit: type=1400 audit(5365258.749:11): avc: denied { map } for pid=547 comm="logd" path="/sbin/logd" dev="rootfs" ino=13370 scontext=u:r:logd:s0 tcontext=u:object_r:rootfs:s0 tclass=file permissive=1
1501[ 5.809978] audit: type=1400 audit(5365258.749:12): avc: denied { read execute } for pid=547 comm="logd" path="/sbin/logd" dev="rootfs" ino=13370 scontext=u:r:logd:s0 tcontext=u:object_r:rootfs:s0 tclass=file permissive=1
1502[ 5.813647] Mass Storage Function, version: 2009/09/11
1503[ 5.813658] LUN: removable file: (no medium)
1504[ 5.814853] file system registered
1505[ 5.815379] f_cdev_alloc: port_name:at_usb0 (0000000000000000) portno:(0)
1506[ 5.815661] f_cdev_alloc: port_name:at_usb1 (0000000000000000) portno:(1)
1507[ 5.815766] cser_set_inst_name: Failed to create cdev port(2)
1508[ 5.817139] using random self ethernet address
1509[ 5.817147] using random host ethernet address
1510[ 5.818793] logd: failed to set AID_LOGD uid
1511[ 5.818857] logd: Cannot read /system/etc/event-log-tags
1512[ 5.819452] logd.auditd: start
1513[ 5.819476] logd.klogd: 5819459163
1514[ 5.833735] backlight: backlight_device_set_brightness: set brightness to 1200
1515[ 5.838343] drm_new_set_master: pid=549, task_name=recovery
1516[ 5.846812] type=1400 audit(5365258.769:15): avc: denied { read } for pid=544 comm="hwservicemanage" name="plat_hwservice_contexts" dev="rootfs" ino=13160 scontext=u:r:recovery:s0 tcontext=u:object_r:hwservice_contexts_file:s0 tclass=file permissive=1
1517[ 5.846889] type=1400 audit(5365258.769:15): avc: denied { read } for pid=544 comm="hwservicemanage" name="plat_hwservice_contexts" dev="rootfs" ino=13160 scontext=u:r:recovery:s0 tcontext=u:object_r:hwservice_contexts_file:s0 tclass=file permissive=1
1518[ 5.846905] type=1400 audit(5365258.769:16): avc: denied { open } for pid=544 comm="hwservicemanage" path="/vendor_hwservice_contexts" dev="rootfs" ino=13649 scontext=u:r:recovery:s0 tcontext=u:object_r:hwservice_contexts_file:s0 tclass=file permissive=1
1519[ 5.847248] type=1400 audit(5365258.769:16): avc: denied { open } for pid=544 comm="hwservicemanage" path="/vendor_hwservice_contexts" dev="rootfs" ino=13649 scontext=u:r:recovery:s0 tcontext=u:object_r:hwservice_contexts_file:s0 tclass=file permissive=1
1520[ 5.847264] type=1400 audit(5365258.769:17): avc: denied { getattr } for pid=544 comm="hwservicemanage" path="/vendor_hwservice_contexts" dev="rootfs" ino=13649 scontext=u:r:recovery:s0 tcontext=u:object_r:hwservice_contexts_file:s0 tclass=file permissive=1
1521[ 5.847329] type=1400 audit(5365258.769:17): avc: denied { getattr } for pid=544 comm="hwservicemanage" path="/vendor_hwservice_contexts" dev="rootfs" ino=13649 scontext=u:r:recovery:s0 tcontext=u:object_r:hwservice_contexts_file:s0 tclass=file permissive=1
1522[ 5.853856] msm-dsi-display:[dsi_display_read_panel] 0x0
1523[ 5.853858] msm-dsi-display:[dsi_display_read_panel]
1524[ 5.853867] msm-dsi-display:[dsi_display_enable] elvss dimming read result 0
1525[ 5.853872] msm-dsi-display:[dsi_display_enable] fod hbm on change to 0
1526[ 5.853877] msm-dsi-display:[dsi_display_enable] fod hbm off change to 0
1527[ 5.853883] thermal_sys: screen_state_for_thermal_callback: DRM_BLANK_UNBLANK
1528[ 5.923448] dsi-drm:[dsi_bridge_post_disable] dsi_bridge_post_disable wrong doze state
1529[ 6.043643] msm-dsi-panel:[dsi_panel_disable:5083] [SDE] dsi_panel_disable: DSI_CMD_SET_OFF
1530[ 6.060197] thermal_sys: screen_state_for_thermal_callback: DRM_BLANK_POWERDOWN
1531[ 6.064635] dsi-drm:[dsi_bridge_pre_enable] dsi_bridge_pre_enable power on from power off
1532[ 6.064688] dsi-ctrl:[_dsi_ctrl_setup_isr] [DSI_0] IRQ 637 registered
1533[ 6.188285] msm-dsi-panel:[dsi_panel_enable:4997] [SDE] dsi_panel_enable: DSI_CMD_SET_ON
1534[ 6.188306] thermal_sys: screen_state_for_thermal_callback: DRM_BLANK_UNBLANK
1535[ 6.188315] msm-dsi-panel:[panel_disp_param_send_lock:4573] dimmingon
1536[ 6.281942] EXT4-fs (sda23): mounted filesystem with ordered data mode. Opts:
1537[ 6.296587] SELinux: Context u:object_r:persist_time_file:s0 is not valid (left unmapped).
1538[ 6.307976] EXT4-fs (sda29): mounted filesystem with ordered data mode. Opts:
1539[ 6.319699] EXT4-fs (sda31): mounted filesystem with ordered data mode. Opts:
1540[ 6.343351] EXT4-fs (sda31): errors=remount-ro for active namespaces on umount 0
1541[ 6.355053] EXT4-fs (sda31): mounted filesystem with ordered data mode. Opts:
1542[ 6.420072] msm-dsi-panel:[panel_disp_param_send_lock:4573] dimmingon
1543[ 6.536675] EXT4-fs (sde54): mounted filesystem with ordered data mode. Opts:
1544[ 6.545532] EXT4-fs (sde54): mounted filesystem with ordered data mode. Opts:
1545[ 6.555523] EXT4-fs (sde53): mounted filesystem with ordered data mode. Opts:
1546[ 6.561268] SELinux: Context u:object_r:vendor_bt_data_file:s0 is not valid (left unmapped).
1547[ 6.563387] SELinux: Context u:object_r:tlocd_data_file:s0 is not valid (left unmapped).
1548[ 6.564027] SELinux: Context u:object_r:vendor_qdma_data_file:s0 is not valid (left unmapped).
1549[ 6.564565] SELinux: Context u:object_r:vendor_audio_data_file:s0 is not valid (left unmapped).
1550[ 6.565985] SELinux: Context u:object_r:vendor_vpp_data_file:s0 is not valid (left unmapped).
1551[ 6.566516] SELinux: Context u:object_r:radio_vendor_data_file:s0 is not valid (left unmapped).
1552[ 6.567321] SELinux: Context u:object_r:mediadrm_vendor_data_file:s0 is not valid (left unmapped).
1553[ 6.567870] SELinux: Context u:object_r:netmgr_data_file:s0 is not valid (left unmapped).
1554[ 6.568412] SELinux: Context u:object_r:netmgr_recovery_data_file:s0 is not valid (left unmapped).
1555[ 6.569004] SELinux: Context u:object_r:vendor_qti_data_file:s0 is not valid (left unmapped).
1556[ 6.569550] SELinux: Context u:object_r:lm_data_file:s0 is not valid (left unmapped).
1557[ 6.570625] SELinux: Context u:object_r:iop_data_file:s0 is not valid (left unmapped).
1558[ 6.574464] SELinux: Context u:object_r:location_data_file:s0 is not valid (left unmapped).
1559[ 6.575972] SELinux: Context u:object_r:minidump_data_file:s0 is not valid (left unmapped).
1560[ 6.576551] SELinux: Context u:object_r:wifi_vendor_data_file:s0 is not valid (left unmapped).
1561[ 6.577211] SELinux: Context u:object_r:ramdump_vendor_data_file:s0 is not valid (left unmapped).
1562[ 6.577753] SELinux: Context u:object_r:vendor_time_data_file:s0 is not valid (left unmapped).
1563[ 6.578412] SELinux: Context u:object_r:ipa_vendor_data_file:s0 is not valid (left unmapped).
1564[ 6.578994] SELinux: Context u:object_r:vendor_media_data_file:s0 is not valid (left unmapped).
1565[ 6.579554] SELinux: Context u:object_r:data_tzstorage_file:s0 is not valid (left unmapped).
1566[ 6.580100] SELinux: Context u:object_r:vendor_tui_data_file:s0 is not valid (left unmapped).
1567[ 6.580652] SELinux: Context u:object_r:port_bridge_data_file:s0 is not valid (left unmapped).
1568[ 6.581206] SELinux: Context u:object_r:vendor_mbn_data_file:s0 is not valid (left unmapped).
1569[ 6.687177] SELinux: Context u:object_r:sensors_vendor_data_file:s0 is not valid (left unmapped).
1570[ 6.688017] SELinux: Context u:object_r:displaycount_data_file:s0 is not valid (left unmapped).
1571[ 6.688611] SELinux: Context u:object_r:hbtp_log_file:s0 is not valid (left unmapped).
1572[ 6.689141] SELinux: Context u:object_r:otrp_data_file:s0 is not valid (left unmapped).
1573[ 6.689752] SELinux: Context u:object_r:vendor_tombstone_data_file:s0 is not valid (left unmapped).
1574[ 6.692984] SELinux: Context u:object_r:thermal_data_file:s0 is not valid (left unmapped).
1575[ 6.693942] SELinux: Context u:object_r:charge_log_file:s0 is not valid (left unmapped).
1576[ 6.694560] SELinux: Context u:object_r:secure_element_vendor_data_file:s0 is not valid (left unmapped).
1577[ 6.695110] SELinux: Context u:object_r:hal_neuralnetworks_data_file:s0 is not valid (left unmapped).
1578[ 6.695649] SELinux: Context u:object_r:nfc_vendor_data_file:s0 is not valid (left unmapped).
1579[ 6.696678] SELinux: Context u:object_r:ta_data_file:s0 is not valid (left unmapped).
1580[ 6.697225] SELinux: Context u:object_r:sensing_vendor_data_file:s0 is not valid (left unmapped).
1581[ 6.698079] SELinux: Context u:object_r:fingerprint_data_file:s0 is not valid (left unmapped).
1582[ 6.702327] SELinux: Context u:object_r:vendor_camera_data_file:s0 is not valid (left unmapped).
1583[ 6.703043] SELinux: Context u:object_r:mpctl_data_file:s0 is not valid (left unmapped).
1584[ 6.703992] SELinux: Context u:object_r:mqsas_common_file:s0 is not valid (left unmapped).
1585[ 6.704562] SELinux: Context u:object_r:display_vendor_data_file:s0 is not valid (left unmapped).
1586[ 6.705158] SELinux: Context u:object_r:cnd_data_file:s0 is not valid (left unmapped).
1587[ 6.708145] SELinux: Context u:object_r:wifi_vendor_wpa_socket:s0 is not valid (left unmapped).
1588[ 6.709942] SELinux: Context u:object_r:wigig_hostapd_socket:s0 is not valid (left unmapped).
1589[ 6.714711] SELinux: Context u:object_r:offlinelog_file:s0 is not valid (left unmapped).
1590[ 6.733476] SELinux: Context u:object_r:rollback_data_file:s0 is not valid (left unmapped).
1591[ 6.736708] SELinux: Context u:object_r:face_vendor_data_file:s0 is not valid (left unmapped).
1592[ 6.738730] SELinux: Context u:object_r:gsi_data_file:s0 is not valid (left unmapped).
1593[ 6.740088] SELinux: Context u:object_r:staging_data_file:s0 is not valid (left unmapped).
1594[ 6.742511] SELinux: Context u:object_r:mqsas_data_file:s0 is not valid (left unmapped).
1595[ 6.781407] SELinux: Context u:object_r:privapp_data_file:s0:c512,c768 is not valid (left unmapped).
1596[ 7.120034] PL_AWAKE: current vote is now 0 voted by PL_VOTER,0, previous voted 0
1597[ 7.640363] USB_IRQ_DISABLE: current vote is now 0 voted by PD_VOTER,0, previous voted 0
1598[ 7.640723] QNOVO_AWAKE: current vote is now 1 voted by USB_READY_VOTER,0, previous voted 0
1599[ 7.641008] FG: status_change_work: charge_status:2 charge_type:1 charge_done:0
1600[ 7.641372] pm8150b_charger: smblib_get_prop_typec_power_role: TYPE_C_MODE_CFG_REG = 0x10
1601[ 7.734925] SELinux: Context u:object_r:apex_data_file:s0 is not valid (left unmapped).
1602[ 7.744664] SELinux: Context u:object_r:extm_data_file:s0 is not valid (left unmapped).
1603[ 7.969668] SELinux: Context u:object_r:iorapd_data_file:s0 is not valid (left unmapped).
1604[ 7.977570] SELinux: Context u:object_r:qvrd_data_file:s0 is not valid (left unmapped).
1605[ 7.981172] SELinux: Context u:object_r:dpmd_data_file:s0 is not valid (left unmapped).
1606[ 7.983235] SELinux: Context u:object_r:packages_list_file:s0 is not valid (left unmapped).
1607[ 7.997991] SELinux: Context u:object_r:dropbox_data_file:s0 is not valid (left unmapped).
1608[ 8.016540] SELinux: Context u:object_r:mcd_data_file:s0 is not valid (left unmapped).
1609[ 8.017945] SELinux: Context u:object_r:miui_native_file:s0 is not valid (left unmapped).
1610[ 8.018547] SELinux: Context u:object_r:theme_data_file:s0 is not valid (left unmapped).
1611[ 8.021038] SELinux: Context u:object_r:whetstone_data_file:s0 is not valid (left unmapped).
1612[ 8.032508] SELinux: Context u:object_r:migt_file:s0 is not valid (left unmapped).
1613[ 8.033442] SELinux: Context u:object_r:server_configurable_flags_data_file:s0 is not valid (left unmapped).
1614[ 8.442806] EXT4-fs (sda30): mounted filesystem with ordered data mode. Opts:
1615[ 8.462679] EXT4-fs (sda23): mounted filesystem with ordered data mode. Opts:
1616[ 9.990682] FG: fg_delta_esr_irq_handler: irq 563 triggered esr_uohms: 138427
1617[ 9.991149] FG: esr_calib_work: esr_raw: 0x1a1 esr_char_raw: 0x120 esr_meas_diff: 0x81 esr_delta: 0x1066
1618[ 9.991156] FG: esr_calib_work: fg_esr_meas_diff: 0xfe5 esr_filt: 0x3f9 esr_delta_new: 0xc6d
1619[ 9.991456] FG: esr_calib_work: Wrote ESR delta [0x6d 0xc]
1620[ 10.823553] init: starting service 'adbd'...
1621[ 10.824912] init: Created socket '/dev/socket/adbd', mode 660, user 1000, group 1000
1622[ 10.828419] read descriptors
1623[ 10.828490] read strings
1624[ 10.828923] init: processing action (sys.usb.config=adb && sys.usb.ffs.ready=1) from (/init.recovery.usb.rc:113)
1625[ 10.854922] type=1400 audit(1590744897.344:521): avc: denied { getattr } for pid=549 comm="recovery" path="/data/misc/bluedroid/bt_profile.conf" dev="sda31" ino=2360128 scontext=u:r:recovery:s0 tcontext=u:object_r:bluetooth_data_file:s0 tclass=file permissive=1
1626[ 10.854944] type=1400 audit(1590744900.234:801): avc: denied { read } for pid=549 comm="recovery" scontext=u:r:recovery:s0 tcontext=u:r:recovery:s0 tclass=netlink_kobject_uevent_socket permissive=1
1627[ 14.217245] type=1400 audit(1590744900.234:801): avc: denied { read } for pid=549 comm="recovery" scontext=u:r:recovery:s0 tcontext=u:r:recovery:s0 tclass=netlink_kobject_uevent_socket permissive=1
1628[ 14.217268] type=1400 audit(1590744903.594:802): avc: denied { read } for pid=549 comm="recovery" name="7b41441b2004d429.pwd" dev="sda31" ino=2490385 scontext=u:r:recovery:s0 tcontext=u:object_r:system_data_file:s0 tclass=file permissive=1
1629[ 14.217393] type=1400 audit(1590744903.594:802): avc: denied { read } for pid=549 comm="recovery" name="7b41441b2004d429.pwd" dev="sda31" ino=2490385 scontext=u:r:recovery:s0 tcontext=u:object_r:system_data_file:s0 tclass=file permissive=1
1630[ 14.217411] type=1400 audit(1590744903.594:803): avc: denied { open } for pid=549 comm="recovery" path="/data/system_de/0/spblob/7b41441b2004d429.pwd" dev="sda31" ino=2490385 scontext=u:r:recovery:s0 tcontext=u:object_r:system_data_file:s0 tclass=file permissive=1
1631[ 14.242511] type=1400 audit(1590744903.594:803): avc: denied { open } for pid=549 comm="recovery" path="/data/system_de/0/spblob/7b41441b2004d429.pwd" dev="sda31" ino=2490385 scontext=u:r:recovery:s0 tcontext=u:object_r:system_data_file:s0 tclass=file permissive=1
1632[ 14.242533] type=1400 audit(1590744903.624:804): avc: denied { search } for pid=549 comm="recovery" scontext=u:r:recovery:s0 tcontext=u:r:recovery:s0 tclass=key permissive=1
1633[ 14.264433] type=1400 audit(1590744903.624:804): avc: denied { search } for pid=549 comm="recovery" scontext=u:r:recovery:s0 tcontext=u:r:recovery:s0 tclass=key permissive=1
1634[ 14.264459] type=1400 audit(1590744903.644:805): avc: denied { search } for pid=549 comm="recovery" name="keystore" dev="sda31" ino=2359305 scontext=u:r:recovery:s0 tcontext=u:object_r:keystore_data_file:s0 tclass=dir permissive=1
1635[ 14.287936] init: Received control message 'start' for 'keystore' from pid: 549 (/sbin/recovery)
1636[ 14.287969] init: starting service 'keystore'...
1637[ 14.326397] audit_log_lost: 8 callbacks suppressed
1638[ 14.326398] audit: audit_lost=768 audit_rate_limit=5 audit_backlog_limit=64
1639[ 14.326405] audit: rate limit exceeded
1640[ 14.390734] init: Received control message 'start' for 'keystore_auth' from pid: 549 (/sbin/recovery)
1641[ 14.390778] init: starting service 'keystore_auth'...
1642[ 14.422945] init: Service 'keystore_auth' (pid 639) exited with status 0
1643[ 18.978784] FG: fg_delta_esr_irq_handler: irq 563 triggered esr_uohms: 141356
1644[ 18.979261] FG: esr_calib_work: esr_raw: 0x1b7 esr_char_raw: 0x120 esr_meas_diff: 0x97 esr_delta: 0xc7a
1645[ 18.979268] FG: esr_calib_work: fg_esr_meas_diff: 0xbe3 esr_filt: 0x2f8 esr_delta_new: 0x982
1646[ 18.979566] FG: esr_calib_work: Wrote ESR delta [0x82 0x9]
1647[ 19.526694] init: Received control message 'stop' for 'keystore' from pid: 549 (/sbin/recovery)
1648[ 19.526726] init: Sending signal 9 to service 'keystore' (pid 637) process group...
1649[ 19.532133] libprocessgroup: Successfully killed process cgroup uid 0 pid 637 in 5ms
1650[ 19.532441] init: Service 'keystore' (pid 637) received signal 9
1651[ 19.538099] type=1400 audit(1590744903.644:810): avc: denied { getattr } for pid=549 comm="recovery" path="/data/misc/keystore/user_0/.1000_chr_USRPKEY_synthetic_password_7b41441b2004d429" dev="sda31" ino=2359346 scontext=u:r:recovery:s0 tcontext=u:object_r:keystore_data_file:s0 tclass=file permissive=1
1652[ 19.538120] type=1400 audit(1590744908.914:817): avc: denied { read } for pid=549 comm="recovery" scontext=u:r:recovery:s0 tcontext=u:r:init:s0 tclass=file permissive=1
1653[ 19.538193] type=1400 audit(1590744908.914:817): avc: denied { read } for pid=549 comm="recovery" scontext=u:r:recovery:s0 tcontext=u:r:init:s0 tclass=file permissive=1
1654[ 19.538205] type=1400 audit(1590744908.914:818): avc: denied { read } for pid=549 comm="recovery" scontext=u:r:recovery:s0 tcontext=u:r:kernel:s0 tclass=file permissive=1
1655[ 19.538715] type=1400 audit(1590744908.914:818): avc: denied { read } for pid=549 comm="recovery" scontext=u:r:recovery:s0 tcontext=u:r:kernel:s0 tclass=file permissive=1
1656[ 19.538728] type=1400 audit(1590744908.914:819): avc: denied { search } for pid=549 comm="recovery" name="1" dev="proc" ino=27752 scontext=u:r:recovery:s0 tcontext=u:r:init:s0 tclass=dir permissive=1
1657[ 19.538785] type=1400 audit(1590744908.914:819): avc: denied { search } for pid=549 comm="recovery" name="1" dev="proc" ino=27752 scontext=u:r:recovery:s0 tcontext=u:r:init:s0 tclass=dir permissive=1
1658[ 19.538797] type=1400 audit(1590744908.914:820): avc: denied { open } for pid=549 comm="recovery" path="/proc/1/cmdline" dev="proc" ino=27060 scontext=u:r:recovery:s0 tcontext=u:r:init:s0 tclass=file permissive=1
1659[ 19.538850] type=1400 audit(1590744908.914:820): avc: denied { open } for pid=549 comm="recovery" path="/proc/1/cmdline" dev="proc" ino=27060 scontext=u:r:recovery:s0 tcontext=u:r:init:s0 tclass=file permissive=1
1660[ 19.538862] audit: audit_lost=774 audit_rate_limit=5 audit_backlog_limit=64
1661[ 19.538864] type=1400 audit(1590744908.914:821): avc: denied { getattr } for pid=549 comm="recovery" path="/proc/1/cmdline" dev="proc" ino=27060 scontext=u:r:recovery:s0 tcontext=u:r:init:s0 tclass=file permissive=1
1662[ 19.538875] audit: rate limit exceeded
1663[ 19.565911] init: Received control message 'interface_start' for 'android.hardware.keymaster@3.0::IKeymasterDevice/default' from pid: 544 (/sbin/hwservicemanager)
1664[ 19.565938] init: Could not find service hosting interface android.hardware.keymaster@3.0::IKeymasterDevice/default
1665[ 20.576630] EXT4-fs (sda31): errors=remount-ro for active namespaces on umount 0
1666[ 20.630676] EXT4-fs (sde54): mounted filesystem with ordered data mode. Opts:
1667[ 20.637442] EXT4-fs (sde54): mounted filesystem with ordered data mode. Opts:
1668[ 20.647274] EXT4-fs (sde53): mounted filesystem with ordered data mode. Opts:
1669[ 20.658004] EXT4-fs (sda31): mounted filesystem with ordered data mode. Opts:
1670[ 20.669100] SELinux: Context u:object_r:system_lib_file:s0 is not valid (left unmapped).
1671[ 20.690773] audit: audit_lost=800 audit_rate_limit=5 audit_backlog_limit=64
1672[ 20.690785] audit: rate limit exceeded
1673[ 20.960576] FG: soc_work_fn: adjust_soc: s 89 r 139159 i 697 v 4149 t 345 cc 8 m 0xe3
1674[ 20.961205] FG: status_change_work: charge_status:2 charge_type:1 charge_done:0
1675[ 21.700202] audit: audit_lost=919 audit_rate_limit=5 audit_backlog_limit=64
1676[ 21.700213] audit: rate limit exceeded
1677[ 22.443464] EXT4-fs (sda31): errors=remount-ro for active namespaces on umount 0
1678[ 22.521595] EXT4-fs (sda30): mounted filesystem with ordered data mode. Opts:
1679[ 22.528626] EXT4-fs (sda23): mounted filesystem with ordered data mode. Opts:
1680[ 22.537028] EXT4-fs (sda31): mounted filesystem with ordered data mode. Opts:
1681[ 22.584966] selinux: avc: denied { set } for property=sys.usb.config pid=549 uid=0 gid=0 scontext=u:r:recovery:s0 tcontext=u:object_r:system_radio_prop:s0 tclass=property_service permissive=1
1682[ 22.584966]
1683[ 22.585050] init: processing action (sys.usb.config=none) from (/init.recovery.usb.rc:84)
1684[ 22.585603] init: Sending signal 9 to service 'adbd' (pid 631) process group...
1685[ 22.587705] android_work: did not send uevent (0 0 0000000000000000)
1686[ 22.653002] libprocessgroup: Successfully killed process cgroup uid 0 pid 631 in 67ms
1687[ 22.658012] read descriptors
1688[ 22.658086] read strings
1689[ 22.662070] EXT4-fs (sde54): mounted filesystem with ordered data mode. Opts:
1690[ 22.880059] QNOVO_CHG_READY: current vote is now 1 voted by USB_READY_VOTER,0, previous voted 0
1691[ 22.880076] QNOVO_NOT_OK: current vote is now 0 voted by CHG_READY_VOTER,0, previous voted 1
1692[ 22.880159] QNOVO_AWAKE: current vote is now 0 voted by USB_READY_VOTER,0, previous voted 1
1693[ 23.388242] audit: audit_lost=1109 audit_rate_limit=5 audit_backlog_limit=64
1694[ 23.388255] audit: rate limit exceeded
1695[ 23.388286] mtp_open
1696[ 23.388528] mtp_open
1697[ 23.388533] mtp_open mtp_release not called returning EBUSY
1698[ 23.388543] mtp_release
1699[ 24.188699] mtp_open
1700[ 25.614319] type=1400 audit(1590744912.044:1166): avc: denied { add_name } for pid=549 comm="recovery" name="orsin" scontext=u:r:recovery:s0 tcontext=u:object_r:rootfs:s0 tclass=dir permissive=1
1701[ 25.614346] type=1400 audit(1590744914.994:1177): avc: denied { read } for pid=549 comm="recovery" name="temp" dev="sysfs" ino=43787 scontext=u:r:recovery:s0 tcontext=u:object_r:sysfs:s0 tclass=file permissive=1
1702[ 25.614448] type=1400 audit(1590744914.994:1177): avc: denied { read } for pid=549 comm="recovery" name="temp" dev="sysfs" ino=43787 scontext=u:r:recovery:s0 tcontext=u:object_r:sysfs:s0 tclass=file permissive=1
1703[ 25.614461] type=1400 audit(1590744914.994:1178): avc: denied { open } for pid=549 comm="recovery" path="/sys/devices/virtual/thermal/thermal_zone0/temp" dev="sysfs" ino=43787 scontext=u:r:recovery:s0 tcontext=u:object_r:sysfs:s0 tclass=file permissive=1
1704[ 25.614516] type=1400 audit(1590744914.994:1178): avc: denied { open } for pid=549 comm="recovery" path="/sys/devices/virtual/thermal/thermal_zone0/temp" dev="sysfs" ino=43787 scontext=u:r:recovery:s0 tcontext=u:object_r:sysfs:s0 tclass=file permissive=1
1705[ 25.614528] type=1400 audit(1590744914.994:1179): avc: denied { getattr } for pid=549 comm="recovery" path="/sys/devices/virtual/thermal/thermal_zone0/temp" dev="sysfs" ino=43787 scontext=u:r:recovery:s0 tcontext=u:object_r:sysfs:s0 tclass=file permissive=1
1706[ 27.972726] FG: fg_delta_esr_irq_handler: irq 563 triggered esr_uohms: 138671
1707[ 27.973233] FG: esr_calib_work: esr_raw: 0x1b5 esr_char_raw: 0x120 esr_meas_diff: 0x95 esr_delta: 0x98f
1708[ 27.973240] FG: esr_calib_work: fg_esr_meas_diff: 0x8fa esr_filt: 0x23e esr_delta_new: 0x751
1709[ 27.973538] FG: esr_calib_work: Wrote ESR delta [0x51 0x7]
1710[ 31.200483] smb:01:1000 47 08 00 50 00 40 00 00 44 00 ff ff c0 00 03 03 00 00 00 00 00 38 2e 3f 60 7f 00 01 01 03 00 00 00 00 00 00 00 01 60 04 02 03 07 a0 fd 30 00 a3 02 0a 0a 00 00 50
1711[ 31.200651] smb:01:1200 00 ff ff fe 00 3d 3d 00 00 00 00 00 00 00 00 01 06 00 01 00
1712[ 31.201077] smb:01:1300 01 01 02 01 00 00 00 00 00 00 10 ff 3f 00 df df 00 00 00 01 00 00 00 40 00 00 a3 00 00 00 00 07 00 5c 38 11 b0 03 00 00 7f 00 00 00 00 00 00 02 d4 00 00 00 00
1713[ 31.201655] smb:01:1500 00 00 08 26 39 e9 02 04 80 00 00 ff ff 4a 00 6d 6d 00 00 00 00 00 00 00 10 00 01 00 00 00 16 00 01 00 03 00 02 00 01 00 01 00 01 01 01 00 07 00 00 00 00 00 44 00 00 00 03 00 00 00 12 00 00 00 00 00 00 00 00 00 00 10
1714[ 31.202095] smb:01:1600 03 00 00 00 0f 02 01 04 00 00 00 4b 4b 00 00 00 00 00 42 00 03 00 00 00 00 00 00 00 00 00 00 00 00 0c 01 00 80 00 00 00 00 00 00 20 b8 4c cc 18 02 00 03 32 04
1715[ 36.959970] FG: fg_delta_esr_irq_handler: irq 563 triggered esr_uohms: 118652
1716[ 36.960692] FG: esr_calib_work: esr_raw: 0x16a esr_char_raw: 0x120 esr_meas_diff: 0x4a esr_delta: 0x75e
1717[ 36.960701] FG: esr_calib_work: fg_esr_meas_diff: 0x714 esr_filt: 0x1c5 esr_delta_new: 0x599
1718[ 36.961001] FG: esr_calib_work: Wrote ESR delta [0x99 0x5]
1719[ 41.440533] FG: soc_work_fn: adjust_soc: s 88 r 117675 i 583 v 4152 t 345 cc 8 m 0xe2
1720[ 41.441159] FG: status_change_work: charge_status:2 charge_type:1 charge_done:0
1721[ 45.953938] FG: fg_delta_esr_irq_handler: irq 563 triggered esr_uohms: 122069
1722[ 45.954428] FG: esr_calib_work: esr_raw: 0x17c esr_char_raw: 0x120 esr_meas_diff: 0x5c esr_delta: 0x5a6
1723[ 45.954436] FG: esr_calib_work: fg_esr_meas_diff: 0x54a esr_filt: 0x152 esr_delta_new: 0x454
1724[ 45.954750] FG: esr_calib_work: Wrote ESR delta [0x54 0x4]
1725[ 54.941716] FG: fg_delta_esr_irq_handler: irq 563 triggered esr_uohms: 137939
1726[ 54.941754] FG_DELTA_ESR_IRQ: current vote is now 0 voted by fg_delta_esr_irq,0, previous voted 1
1727[ 54.942065] esr_charging_timer set to 0/96
1728[ 54.942353] esr_discharging_timer set to 0/96
1729[ 54.943207] FG: fg_gen4_esr_fast_calib_config: Disabling ESR fast calibration
1730[ 61.920554] FG: soc_work_fn: adjust_soc: s 88 r 137695 i 544 v 4150 t 347 cc 8 m 0xe2
1731[ 82.400564] FG: soc_work_fn: adjust_soc: s 88 r 137695 i 511 v 4150 t 347 cc 8 m 0xe2
1732[ 87.927774] type=1400 audit(1590744914.994:1179): avc: denied { getattr } for pid=549 comm="recovery" path="/sys/devices/virtual/thermal/thermal_zone0/temp" dev="sysfs" ino=43787 scontext=u:r:recovery:s0 tcontext=u:object_r:sysfs:s0 tclass=file permissive=1
1733[ 87.927798] type=1400 audit(1590744977.304:1180): avc: denied { write } for pid=549 comm="recovery" name="0" dev="sda31" ino=2752516 scontext=u:r:recovery:s0 tcontext=u:object_r:media_rw_data_file:s0 tclass=dir permissive=1
1734[ 87.927936] type=1400 audit(1590744977.304:1180): avc: denied { write } for pid=549 comm="recovery" name="0" dev="sda31" ino=2752516 scontext=u:r:recovery:s0 tcontext=u:object_r:media_rw_data_file:s0 tclass=dir permissive=1
1735[ 87.927950] type=1400 audit(1590744977.304:1181): avc: denied { add_name } for pid=549 comm="recovery" name="recovery.log" scontext=u:r:recovery:s0 tcontext=u:object_r:media_rw_data_file:s0 tclass=dir permissive=1
1736[ 87.928007] type=1400 audit(1590744977.304:1181): avc: denied { add_name } for pid=549 comm="recovery" name="recovery.log" scontext=u:r:recovery:s0 tcontext=u:object_r:media_rw_data_file:s0 tclass=dir permissive=1
1737[ 87.928020] type=1400 audit(1590744977.304:1182): avc: denied { create } for pid=549 comm="recovery" name="recovery.log" scontext=u:r:recovery:s0 tcontext=u:object_r:media_rw_data_file:s0 tclass=file permissive=1
1738[ 87.939710] type=1400 audit(1590744977.304:1182): avc: denied { create } for pid=549 comm="recovery" name="recovery.log" scontext=u:r:recovery:s0 tcontext=u:object_r:media_rw_data_file:s0 tclass=file permissive=1
1739[ 87.939725] type=1400 audit(1590744977.314:1183): avc: denied { write } for pid=549 comm="recovery" path="/data/media/0/recovery.log" dev="sda31" ino=2752907 scontext=u:r:recovery:s0 tcontext=u:object_r:media_rw_data_file:s0 tclass=file permissive=1
1740[ 87.939912] type=1400 audit(1590744977.314:1183): avc: denied { write } for pid=549 comm="recovery" path="/data/media/0/recovery.log" dev="sda31" ino=2752907 scontext=u:r:recovery:s0 tcontext=u:object_r:media_rw_data_file:s0 tclass=file permissive=1
1741[ 87.939926] type=1400 audit(1590744977.314:1184): avc: denied { setattr } for pid=549 comm="recovery" name="recovery.log" dev="sda31" ino=2752907 scontext=u:r:recovery:s0 tcontext=u:object_r:media_rw_data_file:s0 tclass=file permissive=1