· 6 years ago · Oct 28, 2019, 11:40 AM
1U-Boot SPL 2018.11-g0157013 (Oct 27 2019 - 13:40:50 +0000)
2DRAM: 1024 MiB
3Failed to set core voltage! Can't set CPU frequency
4Trying to boot from MMC1
5
6U-Boot SPL 2018.11-g0157013 (Oct 24 2019 - 16:11:59 +0000)
7DRAM: 1024 MiB
8Failed to set core voltage! Can't set CPU frequency
9Trying to boot from MMC2
10
11
12U-Boot 2018.11-g0157013 (Oct 24 2019 - 16:11:59 +0000) Allwinner Technology
13
14CPU: Allwinner H3 (SUN8I 1680)
15Model: Breez Hub
16DRAM: 1 GiB
17MMC: SUNXI SD/MMC: 0, SUNXI SD/MMC: 1
18Loading Environment from MMC... OK
19In: serial
20Out: serial
21Err: serial
22Net: phy interface0
23eth0: ethernet@1c30000
24starting USB...
25No controllers found
26Hit any key to stop autoboot: 0
27switch to partitions #0, OK
28mmc1(part 0) is current device
29Scanning mmc 1:1...
30Found U-Boot script /boot.scr
31874 bytes read in 7 ms (121.1 KiB/s)
32## Executing script at 43100000
33U-boot loaded from eMMC or secondary SD
3419803 bytes read in 7 ms (2.7 MiB/s)
35** Unable to read file zImage **
36** Unable to read file boot/zImage **
377200280 bytes read in 550 ms (12.5 MiB/s)
38## Booting kernel from Legacy Image at 42000000 ...
39 Image Name: Linux-4.19.75-stable
40 Image Type: ARM Linux Kernel Image (uncompressed)
41 Data Size: 7200216 Bytes = 6.9 MiB
42 Load Address: 40008000
43 Entry Point: 40008000
44 Verifying Checksum ... OK
45## Flattened Device Tree blob at 43000000
46 Booting using the fdt blob at 0x43000000
47 Loading Kernel Image ... OK
48 Loading Device Tree to 49ff8000, end 49fffd5a ... OK
49
50Starting kernel ...
51
52Booting Linux on physical CPU 0x0
53Linux version 4.19.75-stable (oe-user@oe-host) (gcc version 9.2.0 (GCC)) #1 SMP Wed Oct 16 15:37:43 UTC 2019
54CPU: ARMv7 Processor [410fc075] revision 5 (ARMv7), cr=30c5387d
55CPU: div instructions available: patching division code
56CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
57OF: fdt: Machine model: Breez Hub
58Memory policy: Data cache writealloc
59cma: Reserved 256 MiB at 0x0000000060000000
60On node 0 totalpages: 262144
61 Normal zone: 1728 pages used for memmap
62 Normal zone: 0 pages reserved
63 Normal zone: 196608 pages, LIFO batch:63
64 HighMem zone: 65536 pages, LIFO batch:15
65psci: probing for conduit method from DT.
66psci: Using PSCI v0.1 Function IDs from DT
67random: get_random_bytes called from start_kernel+0xa8/0x450 with crng_init=0
68percpu: Embedded 17 pages/cpu s37132 r8192 d24308 u69632
69pcpu-alloc: s37132 r8192 d24308 u69632 alloc=17*4096
70pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3
71Built 1 zonelists, mobility grouping on. Total pages: 260416
72Kernel command line: console=ttyS0,115200 console=tty1 root=/dev/mmcblk2p4 rootwait panic=10
73Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
74Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
75Memory: 756212K/1048576K available (12288K kernel code, 464K rwdata, 2572K rodata, 2048K init, 421K bss, 30220K reserved, 262144K cma-reserved, 262132K highmem)
76Virtual kernel memory layout:
77 vector : 0xffff0000 - 0xffff1000 ( 4 kB)
78 fixmap : 0xffc00000 - 0xfff00000 (3072 kB)
79 vmalloc : 0xf0800000 - 0xff800000 ( 240 MB)
80 lowmem : 0xc0000000 - 0xf0000000 ( 768 MB)
81 pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB)
82 modules : 0xbf000000 - 0xbfe00000 ( 14 MB)
83 .text : 0x(ptrval) - 0x(ptrval) (14304 kB)
84 .init : 0x(ptrval) - 0x(ptrval) (2048 kB)
85 .data : 0x(ptrval) - 0x(ptrval) ( 465 kB)
86 .bss : 0x(ptrval) - 0x(ptrval) ( 422 kB)
87SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
88rcu: Hierarchical RCU implementation.
89rcu: RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=4.
90rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
91NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16
92GIC: Using split EOI/Deactivate mode
93clocksource: timer: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 79635851949 ns
94arch_timer: cp15 timer(s) running at 24.00MHz (phys).
95clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x588fe9dc0, max_idle_ns: 440795202592 ns
96sched_clock: 56 bits at 24MHz, resolution 41ns, wraps every 4398046511097ns
97Switching to timer-based delay loop, resolution 41ns
98Console: colour dummy device 80x30
99console [tty1] enabled
100Calibrating delay loop (skipped), value calculated using timer frequency.. 48.00 BogoMIPS (lpj=120000)
101pid_max: default: 32768 minimum: 301
102Mount-cache hash table entries: 2048 (order: 1, 8192 bytes)
103Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes)
104CPU: Testing write buffer coherency: ok
105/cpus/cpu@0 missing clock-frequency property
106/cpus/cpu@1 missing clock-frequency property
107/cpus/cpu@2 missing clock-frequency property
108/cpus/cpu@3 missing clock-frequency property
109CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
110Setting up static identity map for 0x40200000 - 0x40200060
111rcu: Hierarchical SRCU implementation.
112smp: Bringing up secondary CPUs ...
113CPU1: thread -1, cpu 1, socket 0, mpidr 80000001
114CPU2: thread -1, cpu 2, socket 0, mpidr 80000002
115CPU3: thread -1, cpu 3, socket 0, mpidr 80000003
116smp: Brought up 1 node, 4 CPUs
117SMP: Total of 4 processors activated (192.00 BogoMIPS).
118CPU: All CPU(s) started in HYP mode.
119CPU: Virtualization extensions available.
120devtmpfs: initialized
121VFP support v0.3: implementor 41 architecture 2 part 30 variant 7 rev 5
122clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 9556302231375000 ns
123futex hash table entries: 1024 (order: 4, 65536 bytes)
124xor: measuring software checksum speed
125 arm4regs : 511.200 MB/sec
126 8regs : 355.200 MB/sec
127 32regs : 327.200 MB/sec
128 neon : 520.000 MB/sec
129xor: using function: neon (520.000 MB/sec)
130pinctrl core: initialized pinctrl subsystem
131NET: Registered protocol family 16
132DMA: preallocated 256 KiB pool for atomic coherent allocations
133cpuidle: using governor ladder
134cpuidle: using governor menu
135hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers.
136hw-breakpoint: maximum watchpoint size is 8 bytes.
137cryptd: max_cpu_qlen set to 1000
138SCSI subsystem initialized
139usbcore: registered new interface driver usbfs
140usbcore: registered new interface driver hub
141usbcore: registered new device driver usb
142media: Linux media interface: v0.10
143videodev: Linux video capture interface: v2.00
144pps_core: LinuxPPS API ver. 1 registered
145pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
146PTP clock support registered
147Advanced Linux Sound Architecture Driver Initialized.
148Bluetooth: Core ver 2.22
149NET: Registered protocol family 31
150Bluetooth: HCI device and connection manager initialized
151Bluetooth: HCI socket layer initialized
152Bluetooth: L2CAP socket layer initialized
153Bluetooth: SCO socket layer initialized
154nfc: nfc_init: NFC Core ver 0.1
155NET: Registered protocol family 39
156clocksource: Switched to clocksource arch_sys_counter
157FS-Cache: Loaded
158NET: Registered protocol family 2
159tcp_listen_portaddr_hash hash table entries: 512 (order: 0, 6144 bytes)
160TCP established hash table entries: 8192 (order: 3, 32768 bytes)
161TCP bind hash table entries: 8192 (order: 4, 65536 bytes)
162TCP: Hash tables configured (established 8192 bind 8192)
163UDP hash table entries: 512 (order: 2, 16384 bytes)
164UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
165NET: Registered protocol family 1
166RPC: Registered named UNIX socket transport module.
167RPC: Registered udp transport module.
168RPC: Registered tcp transport module.
169RPC: Registered tcp NFSv4.1 backchannel transport module.
170kvm [1]: 8-bit VMID
171kvm [1]: vgic interrupt IRQ16
172kvm [1]: Hyp mode initialized successfully
173Initialise system trusted keyrings
174workingset: timestamp_bits=14 max_order=18 bucket_order=4
175zbud: loaded
176squashfs: version 4.0 (2009/01/31) Phillip Lougher
177FS-Cache: Netfs 'nfs' registered for caching
178NFS: Registering the id_resolver key type
179Key type id_resolver registered
180Key type id_legacy registered
181nfs4filelayout_init: NFSv4 File Layout Driver Registering...
182Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
183Key type cifs.idmap registered
184fuse init (API version 7.27)
185async_tx: api initialized (async)
186Key type asymmetric registered
187Asymmetric key parser 'x509' registered
188bounce: pool size: 64 pages
189Block layer SCSI generic (bsg) driver version 0.4 loaded (major 244)
190io scheduler noop registered (default)
191io scheduler mq-deadline registered
192io scheduler bfq registered
193sun4i-usb-phy 1c19400.phy: Couldn't request ID GPIO
194sun8i-h3-pinctrl 1c20800.pinctrl: initialized sunXi PIO driver
195sun8i-h3-r-pinctrl 1f02c00.pinctrl: initialized sunXi PIO driver
196Serial: 8250/16550 driver, 8 ports, IRQ sharing disabled
197console [ttyS0] disabled
1981c28000.serial: ttyS0 at MMIO 0x1c28000 (irq = 43, base_baud = 1500000) is a U6_16550A
199console [ttyS0] enabled
2001c28400.serial: ttyS1 at MMIO 0x1c28400 (irq = 44, base_baud = 1500000) is a U6_16550A
201serial serial0: tty port ttyS1 registered
2021c28800.serial: ttyS2 at MMIO 0x1c28800 (irq = 45, base_baud = 1500000) is a U6_16550A
2031c28c00.serial: ttyS3 at MMIO 0x1c28c00 (irq = 46, base_baud = 1500000) is a U6_16550A
204sun4i-drm display-engine: bound 1100000.mixer (ops 0xc0e67dfc)
205sun4i-drm display-engine: bound 1c0c000.lcd-controller (ops 0xc0e65098)
206sun8i-dw-hdmi 1ee0000.hdmi: Detected HDMI TX controller v1.32a with HDCP (sun8i_dw_hdmi_phy)
207sun8i-dw-hdmi 1ee0000.hdmi: registered DesignWare HDMI I2C bus driver
208sun4i-drm display-engine: bound 1ee0000.hdmi (ops 0xc0e67880)
209[drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
210[drm] No driver support for vblank timestamp query.
211[drm] Cannot find any crtc or sizes
212[drm] Initialized sun4i-drm 1.0.0 20150629 for display-engine on minor 0
213loop: module loaded
214Ethernet Channel Bonding Driver: v3.7.1 (April 27, 2011)
215libphy: Fixed MDIO Bus: probed
216tun: Universal TUN/TAP device driver, 1.6
217dwmac-sun8i 1c30000.ethernet: PTP uses main clock
218dwmac-sun8i 1c30000.ethernet: No regulator found
219dwmac-sun8i 1c30000.ethernet: Current syscon value is not the default 148000 (expect 58000)
220dwmac-sun8i 1c30000.ethernet: No HW DMA feature register supported
221dwmac-sun8i 1c30000.ethernet: RX Checksum Offload Engine supported
222dwmac-sun8i 1c30000.ethernet: COE Type 2
223dwmac-sun8i 1c30000.ethernet: TX Checksum insertion supported
224dwmac-sun8i 1c30000.ethernet: Normal descriptors
225dwmac-sun8i 1c30000.ethernet: Chain mode enabled
226libphy: stmmac: probed
227dwmac-sun8i 1c30000.ethernet: Found internal PHY node
228libphy: mdio_mux: probed
229dwmac-sun8i 1c30000.ethernet: Switch mux to internal PHY
230dwmac-sun8i 1c30000.ethernet: Powering internal PHY
231libphy: mdio_mux: probed
232PPP generic driver version 2.4.2
233PPP BSD Compression module registered
234PPP Deflate Compression module registered
235PPP MPPE Compression module registered
236usbcore: registered new interface driver rt2800usb
237usbcore: registered new interface driver r8152
238ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
239ehci-platform: EHCI generic platform driver
240ehci-platform 1c1a000.usb: EHCI Host Controller
241ehci-platform 1c1a000.usb: new USB bus registered, assigned bus number 1
242ehci-platform 1c1a000.usb: irq 28, io mem 0x01c1a000
243ehci-platform 1c1a000.usb: USB 2.0 started, EHCI 1.00
244usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 4.19
245usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
246usb usb1: Product: EHCI Host Controller
247usb usb1: Manufacturer: Linux 4.19.75-stable ehci_hcd
248usb usb1: SerialNumber: 1c1a000.usb
249hub 1-0:1.0: USB hub found
250hub 1-0:1.0: 1 port detected
251ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
252ohci-platform: OHCI generic platform driver
253ohci-platform 1c1a400.usb: Generic Platform OHCI controller
254ohci-platform 1c1a400.usb: new USB bus registered, assigned bus number 2
255ohci-platform 1c1a400.usb: irq 29, io mem 0x01c1a400
256usb usb2: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 4.19
257usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
258usb usb2: Product: Generic Platform OHCI controller
259usb usb2: Manufacturer: Linux 4.19.75-stable ohci_hcd
260usb usb2: SerialNumber: 1c1a400.usb
261hub 2-0:1.0: USB hub found
262hub 2-0:1.0: 1 port detected
263usbcore: registered new interface driver cdc_acm
264cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters
265usbcore: registered new interface driver usblp
266usbcore: registered new interface driver cdc_wdm
267usbcore: registered new interface driver uas
268usbcore: registered new interface driver usb-storage
269usbcore: registered new interface driver ch341
270usbserial: USB Serial support registered for ch341-uart
271usbcore: registered new interface driver cp210x
272usbserial: USB Serial support registered for cp210x
273usbcore: registered new interface driver ftdi_sio
274usbserial: USB Serial support registered for FTDI USB Serial Device
275usbcore: registered new interface driver option
276usbserial: USB Serial support registered for GSM modem (1-port)
277usbcore: registered new interface driver pl2303
278usbserial: USB Serial support registered for pl2303
279udc-core: couldn't find an available UDC - added [g_ether] to list of pending drivers
280mousedev: PS/2 mouse device common for all mice
281sun6i-rtc 1f00000.rtc: rtc core: registered rtc-sun6i as rtc0
282sun6i-rtc 1f00000.rtc: RTC enabled
283i2c /dev entries driver
284rtc-pcf8563 1-0051: low voltage detected, date/time is not reliable.
285rtc-pcf8563 1-0051: rtc core: registered rtc-pcf8563 as rtc1
286IR NEC protocol handler initialized
287IR RC5(x/sz) protocol handler initialized
288IR RC6 protocol handler initialized
289IR JVC protocol handler initialized
290IR Sony protocol handler initialized
291IR SANYO protocol handler initialized
292IR Sharp protocol handler initialized
293IR MCE Keyboard/mouse protocol handler initialized
294IR XMP protocol handler initialized
295sunxi-wdt 1c20ca0.watchdog: Watchdog enabled (timeout=16 sec, nowayout=0)
296device-mapper: ioctl: 4.39.0-ioctl (2018-04-03) initialised: dm-devel@redhat.com
297cpufreq: cpufreq_online: CPU0: Running at unlisted freq: 408000 KHz
298cpufreq: cpufreq_online: CPU0: Unlisted initial frequency changed to: 648000 KHz
299sunxi-mmc 1c0f000.mmc: Linked as a consumer to regulator.2
300sunxi-mmc 1c0f000.mmc: Got CD GPIO
301sunxi-mmc 1c0f000.mmc: initialized, max. request size: 16384 KB
302sunxi-mmc 1c10000.mmc: Linked as a consumer to regulator.2
303sunxi-mmc 1c10000.mmc: allocated mmc-pwrseq
304sunxi-mmc 1c10000.mmc: initialized, max. request size: 16384 KB
305sunxi-mmc 1c11000.mmc: Linked as a consumer to regulator.2
306mmc0: host does not support reading read-only switch, assuming write-enable
307mmc1: queuing unknown CIS tuple 0x80 (2 bytes)
308mmc0: new high speed SDHC card at address aaaa
309mmc1: queuing unknown CIS tuple 0x80 (3 bytes)
310mmcblk0: mmc0:aaaa SS04G 3.69 GiB
311sunxi-mmc 1c11000.mmc: initialized, max. request size: 16384 KB
312mmc1: queuing unknown CIS tuple 0x80 (3 bytes)
313 mmcblk0: p1 p2 p3 p4 < p5 p6 >
314ledtrig-cpu: registered to indicate activity on CPUs
315hidraw: raw HID events driver (C) Jiri Kosina
316usbcore: registered new interface driver usbhid
317usbhid: USB HID core driver
318mmc1: queuing unknown CIS tuple 0x80 (7 bytes)
319usbcore: registered new interface driver snd-usb-audio
320sun4i-codec 1c22c00.codec: ASoC: codec-analog@1f015c0 not registered
321mmc1: queuing unknown CIS tuple 0x81 (9 bytes)
322sun4i-codec 1c22c00.codec: Failed to register our card
323GACT probability NOT on
324ipip: IPv4 and MPLS over IPv4 tunneling driver
325Initializing XFRM netlink socket
326NET: Registered protocol family 10
327Segment Routing with IPv6
328sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver
329mmc2: new DDR MMC card at address 0001
330NET: Registered protocol family 17
331mmcblk2: mmc2:0001 DG4008 7.28 GiB
332NET: Registered protocol family 15
333mmcblk2boot0: mmc2:0001 DG4008 partition 1 4.00 MiB
334Bridge firewalling registered
335mmcblk2boot1: mmc2:0001 DG4008 partition 2 4.00 MiB
336Bluetooth: RFCOMM TTY layer initialized
337 mmcblk2: p1 p2 p3 p4
338Bluetooth: RFCOMM socket layer initialized
339Bluetooth: RFCOMM ver 1.11
340Bluetooth: BNEP (Ethernet Emulation) ver 1.3
341random: fast init done
342Bluetooth: BNEP filters: protocol multicast
343Bluetooth: BNEP socket layer initialized
344Bluetooth: HIDP (Human Interface Emulation) ver 1.2
345Bluetooth: HIDP socket layer initialized
346l2tp_core: L2TP core driver, V2.0
347l2tp_netlink: L2TP netlink interface
348NET4: DECnet for Linux: V.2.5.68s (C) 1995-2003 Linux DECnet Project Team
349DECnet: Routing cache hash table of 1024 buckets, 8Kbytes
350NET: Registered protocol family 12
3518021q: 802.1Q VLAN Support v1.8
352Key type dns_resolver registered
353Registering SWP/SWPB emulation handler
354registered taskstats version 1
355Loading compiled-in X.509 certificates
356Key type encrypted registered
357mmc1: new high speed SDIO card at address 0001
358sun4i-usb-phy 1c19400.phy: Linked as a consumer to regulator.4
359ehci-platform 1c1b000.usb: EHCI Host Controller
360ehci-platform 1c1b000.usb: new USB bus registered, assigned bus number 3
361ehci-platform 1c1b000.usb: irq 30, io mem 0x01c1b000
362ehci-platform 1c1b000.usb: USB 2.0 started, EHCI 1.00
363usb usb3: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 4.19
364usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
365usb usb3: Product: EHCI Host Controller
366usb usb3: Manufacturer: Linux 4.19.75-stable ehci_hcd
367usb usb3: SerialNumber: 1c1b000.usb
368hub 3-0:1.0: USB hub found
369hub 3-0:1.0: 1 port detected
370ehci-platform 1c1c000.usb: EHCI Host Controller
371ehci-platform 1c1c000.usb: new USB bus registered, assigned bus number 4
372ehci-platform 1c1c000.usb: irq 32, io mem 0x01c1c000
373ehci-platform 1c1c000.usb: USB 2.0 started, EHCI 1.00
374usb usb4: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 4.19
375usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
376usb usb4: Product: EHCI Host Controller
377usb usb4: Manufacturer: Linux 4.19.75-stable ehci_hcd
378[drm] Cannot find any crtc or sizes
379usb usb4: SerialNumber: 1c1c000.usb
380hub 4-0:1.0: USB hub found
381hub 4-0:1.0: 1 port detected
382ehci-platform 1c1d000.usb: EHCI Host Controller
383ehci-platform 1c1d000.usb: new USB bus registered, assigned bus number 5
384ehci-platform 1c1d000.usb: irq 34, io mem 0x01c1d000
385ehci-platform 1c1d000.usb: USB 2.0 started, EHCI 1.00
386usb usb5: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 4.19
387usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
388usb usb5: Product: EHCI Host Controller
389usb usb5: Manufacturer: Linux 4.19.75-stable ehci_hcd
390usb usb5: SerialNumber: 1c1d000.usb
391hub 5-0:1.0: USB hub found
392hub 5-0:1.0: 1 port detected
393ohci-platform 1c1b400.usb: Generic Platform OHCI controller
394ohci-platform 1c1b400.usb: new USB bus registered, assigned bus number 6
395ohci-platform 1c1b400.usb: irq 31, io mem 0x01c1b400
396usb usb6: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 4.19
397usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
398usb usb6: Product: Generic Platform OHCI controller
399usb usb6: Manufacturer: Linux 4.19.75-stable ohci_hcd
400usb usb6: SerialNumber: 1c1b400.usb
401hub 6-0:1.0: USB hub found
402hub 6-0:1.0: 1 port detected
403ohci-platform 1c1c400.usb: Generic Platform OHCI controller
404ohci-platform 1c1c400.usb: new USB bus registered, assigned bus number 7
405ohci-platform 1c1c400.usb: irq 33, io mem 0x01c1c400
406usb usb7: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 4.19
407usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1
408usb usb7: Product: Generic Platform OHCI controller
409usb usb7: Manufacturer: Linux 4.19.75-stable ohci_hcd
410usb usb7: SerialNumber: 1c1c400.usb
411hub 7-0:1.0: USB hub found
412hub 7-0:1.0: 1 port detected
413ohci-platform 1c1d400.usb: Generic Platform OHCI controller
414ohci-platform 1c1d400.usb: new USB bus registered, assigned bus number 8
415ohci-platform 1c1d400.usb: irq 35, io mem 0x01c1d400
416usb usb8: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 4.19
417usb usb8: New USB device strings: Mfr=3, Product=2, SerialNumber=1
418usb usb8: Product: Generic Platform OHCI controller
419usb usb8: Manufacturer: Linux 4.19.75-stable ohci_hcd
420usb usb8: SerialNumber: 1c1d400.usb
421hub 8-0:1.0: USB hub found
422hub 8-0:1.0: 1 port detected
423usb_phy_generic usb_phy_generic.3.auto: usb_phy_generic.3.auto supply vcc not found, using dummy regulator
424usb_phy_generic usb_phy_generic.3.auto: Linked as a consumer to regulator.0
425musb-hdrc musb-hdrc.4.auto: MUSB HDRC host driver
426musb-hdrc musb-hdrc.4.auto: new USB bus registered, assigned bus number 9
427usb usb9: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 4.19
428usb usb9: New USB device strings: Mfr=3, Product=2, SerialNumber=1
429usb usb9: Product: MUSB HDRC host driver
430usb usb9: Manufacturer: Linux 4.19.75-stable musb-hcd
431usb usb9: SerialNumber: musb-hdrc.4.auto
432hub 9-0:1.0: USB hub found
433hub 9-0:1.0: 1 port detected
434using random self ethernet address
435using random host ethernet address
436usb0: HOST MAC ea:ac:95:21:7d:e2
437usb0: MAC 7e:ef:d9:0b:40:9c
438using random self ethernet address
439using random host ethernet address
440g_ether gadget: Ethernet Gadget, version: Memorial Day 2008
441g_ether gadget: g_ether ready
442sun4i-codec 1c22c00.codec: ASoC: Failed to create component debugfs directory
443sun4i-codec 1c22c00.codec: Codec <-> 1c22c00.codec mapping ok
444sun6i-rtc 1f00000.rtc: setting system clock to 1970-01-01 00:02:25 UTC (145)
445cfg80211: Loading compiled-in X.509 certificates for regulatory database
446cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
447platform regulatory.0: Direct firmware load for regulatory.db failed with error -2
448cfg80211: failed to load regulatory.db
449vcc3v0: disabling
450vcc5v0: disabling
451usb0-vbus: disabling
452ALSA device list:
453 #0: Dummy 1
454 #1: Loopback 1
455 #2: H3 Audio Codec
456EXT4-fs (mmcblk2p4): INFO: recovery required on readonly filesystem
457EXT4-fs (mmcblk2p4): write access will be enabled during recovery
458musb-hdrc musb-hdrc.4.auto: VBUS_ERROR in b_idle (80, <SessEnd), retry #0, port1 00000100
459usb 7-1: new full-speed USB device number 2 using ohci-platform
460EXT4-fs (mmcblk2p4): recovery complete
461EXT4-fs (mmcblk2p4): mounted filesystem with ordered data mode. Opts: (null)
462VFS: Mounted root (ext4 filesystem) readonly on device 179:12.
463devtmpfs: mounted
464Freeing unused kernel memory: 2048K
465Run /sbin/init as init process
466usb 7-1: New USB device found, idVendor=0658, idProduct=0200, bcdDevice= 0.00
467usb 7-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
468cdc_acm 7-1:1.0: ttyACM0: USB ACM device
469systemd[1]: System time before build time, advancing clock.
470systemd[1]: systemd 243+ running in system mode. (-PAM -AUDIT -SELINUX +IMA -APPARMOR +SMACK +SYSVINIT +UTMP -LIBCRYPTSETUP -GCRYPT -GNUTLS +ACL +XZ -LZ4 -SECCOMP +BLKID -ELFUTILS +KMOD -IDN2 -IDN -PCRE2 default-
471hierarchy=hybrid)
472systemd[1]: Detected architecture arm.
473systemd[1]: Set hostname to <breezhub>.
474systemd[1]: /lib/systemd/system/dbus.socket:5: ListenStream= references a path below legacy directory /var/run/, updating /var/run/dbus/system_bus_socket �→ /run/dbus/system_bus_socket; please update the unit fi
475le accordingly.
476systemd[1]: /lib/systemd/system/rpcbind.socket:5: ListenStream= references a path below legacy directory /var/run/, updating /var/run/rpcbind.sock �→ /run/rpcbind.sock; please update the unit file accordingly.
477random: systemd: uninitialized urandom read (16 bytes read)
478systemd[1]: Created slice system-getty.slice.
479random: systemd: uninitialized urandom read (16 bytes read)
480systemd[1]: Created slice system-serial\x2dgetty.slice.
481random: systemd: uninitialized urandom read (16 bytes read)
482systemd[1]: Created slice User and Session Slice.
483systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
484systemd[1]: Started Forward Password Requests to Wall Directory Watch.
485EXT4-fs (mmcblk2p4): re-mounted. Opts: (null)
486systemd-journald[176]: Received client request to flush runtime journal.
487brcmfmac: F1 signature read @0x18000000=0x1541a9a6
488brcmfmac: brcmf_fw_alloc_request: using brcm/brcmfmac43430-sdio for chip BCM43430/1
489brcmfmac: brcmf_fw_alloc_request: using brcm/brcmfmac43430-sdio for chip BCM43430/1
490brcmfmac: brcmf_c_process_clm_blob: no clm_blob available (err=-2), device may have limited channels available
491brcmfmac: brcmf_c_preinit_dcmds: Firmware: BCM43430/1 wl0: Oct 23 2017 03:55:53 version 7.45.98.38 (r674442 CY) FWID 01-e58d219f
492Bluetooth: HCI UART driver ver 2.3
493Bluetooth: HCI UART protocol H4 registered
494Bluetooth: HCI UART protocol Broadcom registered
495Bluetooth: hci0: BCM: chip id 94
496Bluetooth: hci0: BCM: features 0x2e
497Generic PHY 0.1:01: attached PHY driver [Generic PHY] (mii_bus:phy_addr=0.1:01, irq=POLL)
498Bluetooth: hci0: BCM43430A1
499Bluetooth: hci0: BCM43430A1 (001.002.009) build 0000
500dwmac-sun8i 1c30000.ethernet eth0: No Safety Features support found
501dwmac-sun8i 1c30000.ethernet eth0: No MAC Management Counters available
502dwmac-sun8i 1c30000.ethernet eth0: PTP not supported by HW
503IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
504dwmac-sun8i 1c30000.ethernet eth0: Link is Up - 100Mbps/Full - flow control rx/tx
505IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
506dwmac-sun8i 1c30000.ethernet eth0: Too many address, switching to promiscuous
507dwmac-sun8i 1c30000.ethernet eth0: Too many address, switching to promiscuous
508Bluetooth: hci0: BCM43430A1 (001.002.009) build 0264
509dwmac-sun8i 1c30000.ethernet eth0: Too many address, switching to promiscuous
510dwmac-sun8i 1c30000.ethernet eth0: Too many address, switching to promiscuous
511
512breezhub nodistro.0 breezhub ttyS0
513
514breezhub login: random: crng init done
515random: 7 urandom warning(s) missed due to ratelimiting
516
517breezhub login: root
518root@breezhub:~#
519root@breezhub:~# dmesg | grep -i error
520platform regulatory.0: Direct firmware load for regulatory.db failed with error -2
521musb-hdrc musb-hdrc.4.auto: VBUS_ERROR in b_idle (80, <SessEnd), retry #0, port1 00000100
522root@breezhub:~#
523root@breezhub:~# hciconfig -a
524hci0: Type: Primary Bus: UART
525 BD Address: 10:D0:7A:DD:EA:F7 ACL MTU: 1021:8 SCO MTU: 64:1
526 DOWN
527 RX bytes:1974 acl:0 sco:0 events:184 errors:0
528 TX bytes:37251 acl:0 sco:0 commands:184 errors:0
529 Features: 0xbf 0xfe 0xcf 0xfe 0xdb 0xff 0x7b 0x87
530 Packet type: DM1 DM3 DM5 DH1 DH3 DH5 HV1 HV2 HV3
531 Link policy: RSWITCH SNIFF
532 Link mode: SLAVE ACCEPT
533
534root@breezhub:~# ifconfig wlan0
535wlan0 Link encap:Ethernet HWaddr 10:D0:7A:DD:EA:F6
536 BROADCAST MULTICAST MTU:1500 Metric:1
537 RX packets:0 errors:0 dropped:0 overruns:0 frame:0
538 TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
539 collisions:0 txqueuelen:1000
540 RX bytes:0 (0.0 B) TX bytes:0 (0.0 B)
541
542root@breezhub:~# ps | grep ssh
543 288 root 2716 S grep ssh