· 6 years ago · Jan 20, 2020, 09:08 PM
1[ 0.000000] Booting Linux on physical CPU 0x0
2[ 0.000000] Linux version 4.9.140-gb4a62f0eb099 (sazpaimon@Sazpaimon-PC) (gcc version 6.4.1 20170707 (Linaro GCC 6.4-2017.08) ) #1 SMP PREEMPT Sun Jan 19 12:58:49 EST 2020
3[ 0.000000] Boot CPU: AArch64 Processor [411fd071]
4[ 0.000000] OF: fdt:memory scan node memory@80000000, reg size 32,
5[ 0.000000] OF: fdt: - 80000000 , 60000000
6[ 0.000000] OF: fdt: - 100000000 , 80000000
7[ 0.000000] OF: fdt:Reserved memory: failed to reserve memory for node 'fb0_carveout': base 0x0000000000000000, size 0 MiB
8[ 0.000000] OF: fdt:Reserved memory: failed to reserve memory for node 'fb0_carveout': base 0x0000000000000000, size 0 MiB
9[ 0.000000] OF: fdt:Reserved memory: failed to reserve memory for node 'fb1_carveout': base 0x0000000000000000, size 0 MiB
10[ 0.000000] OF: fdt:Reserved memory: failed to reserve memory for node 'fb1_carveout': base 0x0000000000000000, size 0 MiB
11[ 0.000000] OF: reserved mem: initialized node vpr-carveout, compatible id nvidia,vpr-carveout
12[ 0.000000] OF: reserved mem: initialized node iram-carveout, compatible id nvidia,iram-carveout
13[ 0.000000] OF: reserved mem: initialized node ramoops_carveout, compatible id nvidia,ramoops
14[ 0.000000] cma: Reserved 64 MiB at 0x00000000c3000000
15[ 0.000000] On node 0 totalpages: 916992
16[ 0.000000] DMA zone: 6136 pages used for memmap
17[ 0.000000] DMA zone: 0 pages reserved
18[ 0.000000] DMA zone: 392704 pages, LIFO batch:31
19[ 0.000000] Normal zone: 8192 pages used for memmap
20[ 0.000000] Normal zone: 524288 pages, LIFO batch:31
21[ 0.000000] psci: probing for conduit method from DT.
22[ 0.000000] psci: PSCIv1.1 detected in firmware.
23[ 0.000000] psci: Using standard PSCI v0.2 function IDs
24[ 0.000000] psci: MIGRATE_INFO_TYPE not supported.
25[ 0.000000] psci: SMC Calling Convention v1.1
26[ 0.000000] percpu: Embedded 25 pages/cpu @ffffffc0ffdb1000 s61976 r8192 d32232 u102400
27[ 0.000000] pcpu-alloc: s61976 r8192 d32232 u102400 alloc=25*4096
28[ 0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3
29[ 0.000000] CPU features: enabling workaround for ARM erratum 832075
30[ 0.000000] Speculative Store Bypass Disable mitigation not required
31[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 902664
32[ 0.000000] Kernel command line: skip_initramfs rw rootwait rootfstype=ext4 root=/dev/mmcblk0p4 init=/init nvdec_enabled=0 firmware_class.path=/vendor/firmware log_buf_len=4M loglevel=5 androidboot.bootloader="2020.01-rc5-00022-g0a187c8519-dirty" androidboot.hardware=icosa androidboot.selinux=permissive androidboot.serialno=2017180509 androidboot.console=ttyGS0 console=tty1 pmc_reboot2payload.default_payload=reboot_payload.bin pmc_reboot2payload.reboot_action=via-payload pmc_reboot2payload.hekate_config_id=SWANDR pmc_reboot2payload.enabled=1
33[ 0.000000] log_buf_len: 4194304 bytes
34[ 0.000000] early log buf free: 62604(95%)
35[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
36[ 0.000000] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
37[ 0.000000] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
38[ 0.000000] Memory: 3080556K/3667968K available (15806K kernel code, 2798K rwdata, 6284K rodata, 8000K init, 712K bss, 112276K reserved, 475136K cma-reserved)
39[ 0.000000] Virtual kernel memory layout:
40[ 0.000000] modules : 0xffffff8000000000 - 0xffffff8008000000 ( 128 MB)
41[ 0.000000] vmalloc : 0xffffff8008000000 - 0xffffffbebfff0000 ( 250 GB)
42[ 0.000000] .text : 0xffffff8008200000 - 0xffffff8009170000 ( 15808 KB)
43[ 0.000000] .rodata : 0xffffff8009170000 - 0xffffff80097a0000 ( 6336 KB)
44[ 0.000000] .init : 0xffffff80097a0000 - 0xffffff8009f70000 ( 8000 KB)
45[ 0.000000] .data : 0xffffff8009f70000 - 0xffffff800a22b808 ( 2799 KB)
46[ 0.000000] .bss : 0xffffff800a22b808 - 0xffffff800a2dd8dc ( 713 KB)
47[ 0.000000] fixed : 0xffffffbefe7fb000 - 0xffffffbefec00000 ( 4116 KB)
48[ 0.000000] PCI I/O : 0xffffffbefee00000 - 0xffffffbeffe00000 ( 16 MB)
49[ 0.000000] vmemmap : 0xffffffbf00000000 - 0xffffffc000000000 ( 4 GB maximum)
50[ 0.000000] 0xffffffbf00000000 - 0xffffffbf04000000 ( 64 MB actual)
51[ 0.000000] memory : 0xffffffc000000000 - 0xffffffc100000000 ( 4096 MB)
52[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
53[ 0.000000] Preemptible hierarchical RCU implementation.
54[ 0.000000] Build-time adjustment of leaf fanout to 64.
55[ 0.000000] RCU restricting CPUs from NR_CPUS=64 to nr_cpu_ids=4.
56[ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=64, nr_cpu_ids=4
57[ 0.000000] NR_IRQS:64 nr_irqs:64 0
58[ 0.000000] /interrupt-controller@60004000: 192 interrupts forwarded to /interrupt-controller
59[ 0.000000] t210 clock and reset probe
60[ 0.000000] boot misc0 0x0: expected 0x80000
61[ 0.000000] (comparison mask = 0x400ffffb)
62[ 0.000000] boot misc2 0x1f720005: expected 0x1f720f05
63[ 0.000000] (comparison mask = 0xffffff17)
64[ 0.000000] PLL_C already enabled. Postponing set full defaults
65[ 0.000000] boot misc0 0x0: expected 0x20
66[ 0.000000] (comparison mask = 0x7ffffff)
67[ 0.000000] boot misc1 0x10000000: expected 0xc0000000
68[ 0.000000] (comparison mask = 0xf8000000)
69[ 0.000000] boot misc2 0x0: expected 0xf400f0da
70[ 0.000000] (comparison mask = 0xffffffff)
71[ 0.000000] boot misc3 0x0: expected 0x2004f400
72[ 0.000000] (comparison mask = 0xffffffff)
73[ 0.000000] PLL_DP already enabled. Postponing set full defaults
74[ 0.000000] tegra-pmc: get_secure_pmc_setting: done secure_pmc=1
75[ 0.000000] boot misc1 0x0: expected 0x20
76[ 0.000000] (comparison mask = 0xffffff)
77[ 0.000000] PLL_X already enabled. Postponing set full defaults
78[ 0.000000] clk_cbus_recalc_rate: no gbus parent
79[ 0.000000] clk_cbus_recalc_rate: no gbus parent
80[ 0.000000] clk_cbus_recalc_rate: no gbus parent
81[ 0.000000] clk_cbus_recalc_rate: no gbus parent
82[ 0.000000] clk_cbus_recalc_rate: no gbus parent
83[ 0.000000] arm_arch_timer: Architected cp15 timer(s) running at 19.20MHz (phys).
84[ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x46d987e47, max_idle_ns: 440795202767 ns
85[ 0.000006] sched_clock: 56 bits at 19MHz, resolution 52ns, wraps every 4398046511078ns
86[ 0.001617] Console: colour dummy device 80x25
87[ 0.001799] console [tty1] enabled
88[ 0.001811] kmemleak: Kernel memory leak detector disabled
89[ 0.001830] Calibrating delay loop (skipped), value calculated using timer frequency.. 38.40 BogoMIPS (lpj=76800)
90[ 0.001846] pid_max: default: 32768 minimum: 301
91[ 0.002428] Security Framework initialized
92[ 0.002440] SELinux: Initializing.
93[ 0.002748] SELinux: Starting in permissive mode
94[ 0.003066] Mount-cache hash table entries: 8192 (order: 4, 65536 bytes)
95[ 0.003076] Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes)
96[ 0.004284] ftrace: allocating 48449 entries in 190 pages
97[ 0.246185] sched-energy: CPU device node has no sched-energy-costs
98[ 0.246205] ASID allocator initialised with 32768 entries
99[ 0.282441] tegra-id: chipid=22117.
100[ 0.282451] tegra-id: opt_subrevision=0.
101[ 0.282467] Tegra Speedo/IDDQ fuse revision 4
102[ 0.282474] Tegra: CPU Speedo ID 3, SoC Speedo ID 0, GPU Speedo ID 3
103[ 0.282481] Tegra: CPU Process ID 0, SoC Process ID 1, GPU Process ID 0
104[ 0.282488] Tegra: CPU Speedo Value 2094, SoC Speedo Value 2007, GPU Speedo Value 2109
105[ 0.282495] Tegra: CPU IDDQ Value 2132, SoC IDDQ Value 2408, GPU IDDQ Value 3005
106[ 0.282512] Tegra Revision: A02 SKU: 0x83 CPU Process: 0 SoC Process: 1
107[ 0.282527] DTS File Name: /home/sazpaimon/android/lineage/kernel/nvidia/linux-4.9/kernel/kernel-4.9/arch/arm64/boot/dts/../../../../../../hardware/nvidia/platform/t210/icosa/kernel-dts/tegra210-icosa.dts
108[ 0.282537] DTB Build time: Jan 19 2020 15:55:27
109[ 0.332863] CPU1: Booted secondary processor [411fd071]
110[ 0.364846] CPU2: Booted secondary processor [411fd071]
111[ 0.396833] CPU3: Booted secondary processor [411fd071]
112[ 0.396945] Brought up 4 CPUs
113[ 0.396953] SMP: Total of 4 processors activated.
114[ 0.396963] CPU features: detected feature: 32-bit EL0 Support
115[ 0.396969] CPU features: detected feature: Kernel page table isolation (KPTI)
116[ 0.457001] CPU: All CPU(s) started at EL2
117[ 0.457026] alternatives: patching kernel code
118[ 0.464451] devtmpfs: initialized
119[ 0.515489] Initilizing CustomIPI irq domain
120[ 0.515852] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
121[ 0.515870] futex hash table entries: 1024 (order: 4, 65536 bytes)
122[ 0.516001] cma: strict cma policy: off
123[ 0.525043] pinctrl core: initialized pinctrl subsystem
124[ 0.525672] regulator-dummy: no parameters
125[ 0.525948] Initializing plugin-manager
126[ 0.526012] Plugin module not found
127[ 0.526042] Plugin-manager not available
128[ 0.527784] NET: Registered protocol family 16
129[ 0.528426] schedtune: init normalization constants...
130[ 0.528432] schedtune: no energy model data
131[ 0.528436] schedtune: disabled!
132[ 0.537344] pstore: using zlib compression
133[ 0.537514] console [pstore-1] enabled
134[ 0.537753] pstore: Registered ramoops as persistent store backend
135[ 0.537763] ramoops: attached 0x200000@0xb0000000, ecc: 0/0
136[ 0.552235] cpuidle: using governor menu
137[ 0.554647] tegra_smmu 70019000.iommu: Loaded Tegra IOMMU driver
138[ 0.555985] vdso: 2 pages (1 code @ ffffff8009177000, 1 data @ ffffff8009f74000)
139[ 0.556004] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers.
140[ 0.559555] atomic_pool_init():622: DMA: preallocated 1024 KiB pool for atomic allocations
141[ 0.562233] tegra_powergate_init: DONE
142[ 0.562247] DTS File Name: /home/sazpaimon/android/lineage/kernel/nvidia/linux-4.9/kernel/kernel-4.9/arch/arm64/boot/dts/../../../../../../hardware/nvidia/platform/t210/icosa/kernel-dts/tegra210-icosa.dts
143[ 0.562257] DTB Build time: Jan 19 2020 15:55:27
144[ 0.563593] tegra_debug_uart_syscore_init: stdout-path property missing
145[ 0.563599] Tegra reboot handler registered.
146[ 0.567896] iommu: Adding device tegra-carveouts to group 0
147[ 0.567984] platform tegra-carveouts: domain=ffffffc0f9c96258 allocates as[0]=ffffffc0fa3f40a8
148[ 0.568357] iommu: Adding device smmu_test to group 1
149[ 0.568419] platform smmu_test: domain=ffffffc0f9c96498 allocates as[0]=ffffffc0fa3f4110
150[ 0.569496] mc: mapped MMIO address: 0xffffff800802c000 -> 0x70019000
151[ 0.569590] mc: mapped MMIO address: 0xffffff8008063000 -> 0x7001c000
152[ 0.569681] mc: mapped MMIO address: 0xffffff8008089000 -> 0x7001d000
153[ 0.569692] nv-tegra-mc 70019000.mc: No mssnvlink node
154[ 0.569714] mc-err: mcerr ops are set to t21x
155[ 0.584632] iommu: Adding device 70090000.xusb to group 2
156[ 0.584997] iommu: Adding device 70006000.serial to group 3
157[ 0.585057] platform 70006000.serial: domain=ffffffc0f9c9fc18 allocates as[0]=ffffffc0fa3f4178
158[ 0.585525] iommu: Adding device 70006040.serial to group 4
159[ 0.585886] iommu: Adding device 70006200.serial to group 5
160[ 0.586244] iommu: Adding device 70006300.serial to group 6
161[ 0.586496] iommu: Adding device sound to group 7
162[ 0.586557] platform sound: domain=ffffffc0f9d2e318 allocates as[0]=ffffffc0fa3f41e0
163[ 0.587231] iommu: Adding device 7000d400.spi to group 8
164[ 0.587603] iommu: Adding device 7000da00.spi to group 9
165[ 0.588052] iommu: Adding device 50000000.host1x to group 10
166[ 0.588651] iommu: Adding device 54600000.isp to group 11
167[ 0.589051] iommu: Adding device 54680000.isp to group 12
168[ 0.589457] iommu: Adding device tegradc.0 to group 13
169[ 0.589519] platform tegradc.0: domain=ffffffc0f9d2ef18 allocates as[0]=ffffffc0fa3f4248
170[ 0.590015] iommu: Adding device tegradc.1 to group 14
171[ 0.590089] platform tegradc.1: domain=ffffffc0f9d4c198 allocates as[0]=ffffffc0fa3f42b0
172[ 0.590673] iommu: Adding device 54340000.vic to group 15
173[ 0.590951] iommu: Adding device 544c0000.nvenc to group 16
174[ 0.591225] iommu: Adding device 54500000.tsec to group 17
175[ 0.591496] iommu: Adding device 54100000.tsecb to group 18
176[ 0.591772] iommu: Adding device 54480000.nvdec to group 19
177[ 0.592040] iommu: Adding device 54380000.nvjpg to group 20
178[ 0.593141] iommu: Adding device 57000000.gpu to group 21
179[ 0.593200] platform 57000000.gpu: domain=ffffffc0f9d4cf18 allocates as[0]=ffffffc0fa3f4318
180[ 0.593262] platform 57000000.gpu: domain=ffffffc0f9d4cf18 allocates as[1]=ffffffc0fa3f4380
181[ 0.593312] platform 57000000.gpu: domain=ffffffc0f9d4cf18 allocates as[2]=ffffffc0fa3f43e8
182[ 0.593364] platform 57000000.gpu: domain=ffffffc0f9d4cf18 allocates as[3]=ffffffc0fa3f4450
183[ 0.594177] tegra-pmc 7000e400.pmc: i2c-thermtrip node not found, emergency thermal reset disabled.
184[ 0.594221] tegra-pmc 7000e400.pmc: scratch reg offset dts data not present
185[ 0.594236] tegra-pmc: ### PMC reset source: TEGRA_POWER_ON_RESET
186[ 0.594243] tegra-pmc: ### PMC reset level: TEGRA_RESET_LEVEL_WARM
187[ 0.594249] tegra-pmc: ### PMC reset status reg: 0x0
188[ 0.652421] padctrl padctrl.0: Pad control driver tegra-pmc-padctrl registered
189[ 0.652430] tegra-pmc: Clear bootloader IO dpd settings
190[ 0.652456] tegra-pmc 7000e400.pmc: IO padctrl driver initialized
191[ 0.652559] tegra-pmc 7000e400.pmc: PMC: bootrom-commands used for reset
192[ 0.652567] tegra-pmc 7000e400.pmc: PMC: No Bootrom Command
193[ 0.652922] iommu: Adding device 70012000.se to group 22
194[ 0.653994] iommu: Adding device 7000c000.i2c to group 23
195[ 0.654368] iommu: Adding device 7000c400.i2c to group 24
196[ 0.654732] iommu: Adding device 7000c500.i2c to group 25
197[ 0.655090] iommu: Adding device 7000c700.i2c to group 26
198[ 0.655455] iommu: Adding device 7000d000.i2c to group 27
199[ 0.655820] iommu: Adding device 7000d100.i2c to group 28
200[ 0.656261] iommu: Adding device sdhci-tegra.0 to group 29
201[ 0.656337] platform sdhci-tegra.0: domain=ffffffc0f9d9d0d8 allocates as[0]=ffffffc0fa3f44b8
202[ 0.657320] iommu: Adding device 700d0000.xudc to group 30
203[ 0.664500] vdd-ac-bat: 4800 mV
204[ 0.665559] vdd-hdmi: 5000 mV
205[ 0.665949] vdd-cpu-fixed: 1000 mV
206[ 0.704841] random: fast init done
207[ 0.707116] GPIO line 38 (boot-default-input) hogged as input
208[ 0.707147] GPIO line 187 (boot-default-input) hogged as input
209[ 0.707174] GPIO line 188 (boot-default-input) hogged as input
210[ 0.707201] GPIO line 186 (boot-default-input) hogged as input
211[ 0.707227] GPIO line 185 (boot-default-input) hogged as input
212[ 0.707253] GPIO line 184 (boot-default-input) hogged as input
213[ 0.707279] GPIO line 189 (boot-default-input) hogged as input
214[ 0.707305] GPIO line 190 (boot-default-input) hogged as input
215[ 0.707332] GPIO line 191 (boot-default-input) hogged as input
216[ 0.707358] GPIO line 193 (boot-default-input) hogged as input
217[ 0.707386] GPIO line 200 (boot-default-input) hogged as input
218[ 0.707412] GPIO line 84 (boot-default-input) hogged as input
219[ 0.707437] GPIO line 58 (boot-default-input) hogged as input
220[ 0.707462] GPIO line 61 (boot-default-input) hogged as input
221[ 0.707487] GPIO line 62 (boot-default-input) hogged as input
222[ 0.707508] GPIO line 120 (boot-default-input) hogged as input
223[ 0.707533] GPIO line 174 (boot-default-input) hogged as input
224[ 0.707564] GPIO line 218 (boot-default-output-low) hogged as output/low
225[ 0.707590] GPIO line 219 (boot-default-output-low) hogged as output/low
226[ 0.707616] GPIO line 149 (boot-default-output-low) hogged as output/low
227[ 0.707642] GPIO line 152 (boot-default-output-low) hogged as output/low
228[ 0.707668] GPIO line 153 (boot-default-output-low) hogged as output/low
229[ 0.707695] GPIO line 170 (boot-default-output-low) hogged as output/low
230[ 0.707720] GPIO line 173 (boot-default-output-low) hogged as output/low
231[ 0.707747] GPIO line 85 (boot-default-output-low) hogged as output/low
232[ 0.707774] GPIO line 88 (boot-default-output-low) hogged as output/low
233[ 0.707798] GPIO line 59 (boot-default-output-low) hogged as output/low
234[ 0.707823] GPIO line 60 (boot-default-output-low) hogged as output/low
235[ 0.707848] GPIO line 66 (boot-default-output-low) hogged as output/low
236[ 0.707880] GPIO line 83 (boot-default-output-high) hogged as output/high
237[ 0.707907] GPIO line 227 (boot-default-output-high) hogged as output/high
238[ 0.708218] gpiochip_setup_dev: registered GPIOs 0 to 255 on device: gpiochip0 (tegra-gpio)
239[ 0.718842] eventlib_kernel: keventlib is initialized, test id: 0
240[ 0.719218] SCSI subsystem initialized
241[ 0.719441] libata version 3.00 loaded.
242[ 0.719827] usbcore: registered new interface driver usbfs
243[ 0.719900] usbcore: registered new interface driver hub
244[ 0.719994] usbcore: registered new device driver usb
245[ 0.727108] max77620 4-003c: PMIC Version OTP:0x35 and ES:0x8
246[ 0.729796] max77620 4-003c: Backup battery charging support disabled
247[ 0.733075] vdd-core: 825 <--> 1125 mV at 1000 mV
248[ 0.737083] vddio-ddr: at 1125 mV
249[ 0.738189] vdd-pre-reg: 1350 mV
250[ 0.740897] vdd-1v8: 1800 mV
251[ 0.744889] avdd-sys: 1200 mV
252[ 0.745774] vdd-pex: 1050 mV
253[ 0.746662] vddio-sdmmc1: 1800 <--> 3300 mV at 3300 mV
254[ 0.747749] vdd-gc-3v1: 3100 mV
255[ 0.752895] vdd-rtc: 850 mV
256[ 0.754011] vdd-gc-1v8: 1800 mV
257[ 0.754982] vdd-tp-3v1: 2900 mV
258[ 0.756892] vdd-gen-pll-edp: 1050 mV
259[ 0.757923] vdd-hdmi-dp: 1050 mV
260[ 0.761874] GPIO line 506 (spmic-default-output-high) hogged as output/high
261[ 0.762176] gpiochip_setup_dev: registered GPIOs 504 to 511 on device: gpiochip1 (max77620-gpio)
262[ 0.762637] max77620 4-003c: max77620 probe successful
263[ 0.764887] media: Linux media interface: v0.10
264[ 0.764944] Linux video capture interface: v2.00
265[ 0.766024] pps_core: LinuxPPS API ver. 1 registered
266[ 0.766031] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
267[ 0.766063] PTP clock support registered
268[ 0.766982] bq2419x 0-006b: chip type BQ2419X/3 detected
269[ 0.771288] bq2419x 0-006b: Charging SAFETY timer disabled
270[ 0.771805] bq2419x 0-006b: Charging WATCHDOG timer disabled
271[ 0.771832] batt_regulator: Operation of current configuration missing
272[ 0.771868] batt_regulator: normal standby
273[ 0.772303] bq2419x 0-006b: Registering battery charger driver
274[ 0.773607] vbus_regulator: normal standby
275[ 0.773994] bq2419x 0-006b: Charging enabled
276[ 0.775039] bq2419x 0-006b: Charging enabled
277[ 0.779151] tegra210-emc 7001b000.external-memory-controller: validated EMC DFS table
278[ 0.780127] Advanced Linux Sound Architecture Driver Initialized.
279[ 0.780818] Bluetooth: Core ver 2.22
280[ 0.780870] NET: Registered protocol family 31
281[ 0.780876] Bluetooth: HCI device and connection manager initialized
282[ 0.780891] Bluetooth: HCI socket layer initialized
283[ 0.780901] Bluetooth: L2CAP socket layer initialized
284[ 0.780931] Bluetooth: SCO socket layer initialized
285[ 0.782818] tegra210_dvfs: no clock found for sdmmc2_ddr
286[ 0.782841] tegra210_dvfs: no clock found for sdmmc4_ddr
287[ 0.782902] tegra210_dvfs: no clock found for sdmmc1_ddr
288[ 0.782924] tegra210_dvfs: no clock found for sdmmc3_ddr
289[ 0.784893] tegra_dvfs: Unable to get vdd-cpu rail for step info, defering probe
290[ 0.788244] vdd-3v3: 3300 mV
291[ 0.789594] max77620-gpio7: supplied by avdd-sys
292[ 0.792257] max77620-gpio7: 1200 mV
293[ 0.792824] lcd-bl-en: 1800 mV
294[ 0.793468] en-vdd-sd: supplied by vdd-3v3
295[ 0.793529] en-vdd-sd: 3300 mV
296[ 0.794096] v_pavdd_5v0: 1800 mV
297[ 0.794658] v_navdd_5v0: 1800 mV
298[ 0.795227] v_vdd50_a: 5000 mV
299[ 0.795806] v_vdd50_b: 5000 mV
300[ 0.796503] vdd3v3_gc: supplied by vdd-3v3
301[ 0.796565] vdd3v3_gc: 3300 mV
302[ 0.797225] bm92t 0-0018: bm92t_probe
303[ 0.797235] bm92t 0-0018: bm92t_parse_dt: /i2c@7000c000/bm92t@18
304[ 0.798735] bm92t 0-0018: fw_type: 0x603, fw_revision: 0xd7c
305[ 0.798908] bm92t 0-0018: bm92t_debug_init
306[ 0.798936] bm92t 0-0018: bm92txx driver loading done
307[ 0.800067] camchar: rtcpu character device driver loaded
308[ 0.801724] clocksource: Switched to clocksource arch_sys_counter
309[ 0.853767] VFS: Disk quotas dquot_6.6.0
310[ 0.853909] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
311[ 0.854135] FS-Cache: Loaded
312[ 0.854371] nvmap_heap_init: nvmap_heap_init: created heap block cache
313[ 0.854635] dma_declare_coherent_resizable_cma_memory:345: resizable heap=vpr, base=0x00000000c7000000, size=0x19000000
314[ 0.854652] dma-vpr: heap size is not multiple of cma_chunk_size heap_info->num_chunks (13) rem_chunk_size(0x1000000)
315[ 0.854840] cma: enabled page replacement for spfn=c7000, epfn=e0000
316[ 0.854848] dma_declare_coherent_resizable_cma_memory:394: resizable cma heap=vpr create successful
317[ 0.854860] tegra-carveouts tegra-carveouts: assigned reserved memory node vpr-carveout
318[ 0.854895] tegra-carveouts tegra-carveouts: iram :dma coherent mem declare 0x0000000040001000,258048
319[ 0.854903] tegra-carveouts tegra-carveouts: assigned reserved memory node iram-carveout
320[ 0.854914] nvmap: nvmap_select_cache_ops() nvmap cache ops set to set/ways
321[ 0.854922] nvmap_page_pool_init: Total RAM pages: 888923
322[ 0.854929] nvmap_page_pool_init: nvmap page pool size: 111115 pages (434 MB)
323[ 0.855142] nvmap_background_zero_thread: PP zeroing thread starting.
324[ 0.855407] misc nvmap: created heap iram base 0x0000000040001000 size (252KiB)
325[ 0.856353] misc nvmap: created heap vpr base 0x00000000c7000000 size (409600KiB)
326[ 0.865027] thermal thermal_zone0: Registering thermal zone thermal_zone0 for type AO-therm
327[ 0.866277] thermal thermal_zone1: Registering thermal zone thermal_zone1 for type CPU-therm
328[ 0.866693] thermal thermal_zone2: Registering thermal zone thermal_zone2 for type GPU-therm
329[ 0.867053] thermal thermal_zone3: Registering thermal zone thermal_zone3 for type LCPU-therm
330[ 0.867235] thermal thermal_zone4: Registering thermal zone thermal_zone4 for type PLL-therm
331[ 0.867501] thermal thermal_zone5: Registering thermal zone thermal_zone5 for type Tboard_tegra
332[ 0.868226] thermal thermal_zone6: Registering thermal zone thermal_zone6 for type Tdiode_tegra
333[ 0.868459] thermal thermal_zone7: Registering thermal zone thermal_zone7 for type PMIC-Die
334[ 0.868691] thermal thermal_zone8: Registering thermal zone thermal_zone8 for type Charger-Die
335[ 0.868905] pre_t19x_iso_plat_init(): iso emc max clk=1600000KHz
336[ 0.868911] pre_t19x_iso_plat_init(): max_iso_bw=11520000KB
337[ 0.869463] NET: Registered protocol family 2
338[ 0.870676] TCP established hash table entries: 32768 (order: 6, 262144 bytes)
339[ 0.870997] TCP bind hash table entries: 32768 (order: 7, 524288 bytes)
340[ 0.871622] TCP: Hash tables configured (established 32768 bind 32768)
341[ 0.871719] UDP hash table entries: 2048 (order: 4, 65536 bytes)
342[ 0.871842] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
343[ 0.872361] NET: Registered protocol family 1
344[ 0.872392] PCI: CLS 0 bytes, default 64
345[ 0.873044] thermal thermal_zone9: Registering thermal zone thermal_zone9 for type max170xx_battery
346[ 0.873748] max17042 0-0036: Registering battery gauge driver
347[ 0.882895] host1x 50000000.host1x: initialized
348[ 0.884325] hw perfevents: enabled with armv8_pmuv3 PMU driver, 7 counters available
349[ 0.887523] audit: initializing netlink subsys (disabled)
350[ 0.887597] audit: type=2000 audit(0.623:1): initialized
351[ 0.888426] workingset: timestamp_bits=46 max_order=20 bucket_order=0
352[ 0.902610] squashfs: version 4.0 (2009/01/31) Phillip Lougher
353[ 0.903112] Registering sdcardfs 0.1
354[ 0.904931] ntfs: driver 2.1.32 [Flags: R/W].
355[ 0.905964] fuse init (API version 7.26)
356[ 0.909044] SELinux: Registering netfilter hooks
357[ 0.914080] NET: Registered protocol family 38
358[ 0.914093] Key type asymmetric registered
359[ 0.914099] Asymmetric key parser 'x509' registered
360[ 0.914443] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 239)
361[ 0.914452] io scheduler noop registered
362[ 0.914459] io scheduler deadline registered
363[ 0.914861] io scheduler cfq registered (default)
364[ 0.917551] gic 702f9000.agic: GIC IRQ controller registered
365[ 0.921117] iommu: Adding device 702ef000.adsp to group 31
366[ 0.931733] iommu: Adding device aconnect@702c0000:adsp_audio to group 32
367[ 0.931954] tegra-aconnect aconnect@702c0000: Tegra ACONNECT bus registered
368[ 0.932505] tegra-xusb-padctl 7009f000.xusb_padctl: TEGRA_FUSE_SKU_CALIB_0 = 0x81c8410
369[ 0.932517] tegra-xusb-padctl 7009f000.xusb_padctl: TEGRA_FUSE_USB_CALIB_EXT_0 = 0x4
370[ 0.934228] tegra-xusb-padctl 7009f000.xusb_padctl: dev = phy-usb2.0, lane = usb2-0, function = xusb
371[ 0.934460] tegra-xusb-padctl 7009f000.xusb_padctl: dev = phy-pcie.1, lane = pcie-0, function = pcie-x1
372[ 0.934581] tegra-xusb-padctl 7009f000.xusb_padctl: dev = phy-pcie.2, lane = pcie-1, function = pcie-x4
373[ 0.934697] tegra-xusb-padctl 7009f000.xusb_padctl: dev = phy-pcie.3, lane = pcie-2, function = pcie-x4
374[ 0.934820] tegra-xusb-padctl 7009f000.xusb_padctl: dev = phy-pcie.4, lane = pcie-3, function = pcie-x4
375[ 0.934942] tegra-xusb-padctl 7009f000.xusb_padctl: dev = phy-pcie.5, lane = pcie-4, function = pcie-x4
376[ 0.935066] tegra-xusb-padctl 7009f000.xusb_padctl: dev = phy-pcie.6, lane = pcie-5, function = xusb
377[ 0.935180] tegra-xusb-padctl 7009f000.xusb_padctl: dev = phy-pcie.7, lane = pcie-6, function = xusb
378[ 0.943441] tegra-pwm 7000a000.pwm: PWM clk can sleep in ops
379[ 0.946495] Adding domain tsec-pd to PM domain host1x-pd
380[ 0.948570] tsec 54500000.tsec: initialized
381[ 0.949975] tsec 54100000.tsecb: initialized
382[ 0.950544] Adding domain nvdec-pd to PM domain host1x-pd
383[ 0.953352] nvdec 54480000.nvdec: initialized
384[ 0.954749] Adding domain vic03-pd to PM domain host1x-pd
385[ 0.954951] Adding domain msenc-pd to PM domain host1x-pd
386[ 0.954983] Adding domain nvjpg-pd to PM domain host1x-pd
387[ 0.959055] falcon 54340000.vic: initialized
388[ 0.960413] falcon 544c0000.nvenc: initialized
389[ 0.962022] falcon 54380000.nvjpg: initialized
390[ 0.967447] tegra_cec 70015000.tegra_cec: dt=1 start=0x70015000 end=0x70015FFF irq=93
391[ 0.967497] tegra_cec 70015000.tegra_cec: Enable clock result: 0.
392[ 0.967526] tegra_cec 70015000.tegra_cec: tegra_cec_init started
393[ 0.967559] tegradc tegradc.0: disp0 connected to head0->/host1x/dsi
394[ 0.967606] Node path /chosen/display-board not found
395[ 0.967638] display board info: id 0x0, fab 0x0
396[ 0.967800] tegra_cec 70015000.tegra_cec: cec_add_sysfs ret=0
397[ 0.967808] tegra_cec 70015000.tegra_cec: probed
398[ 0.967906] tegradc tegradc.0: No hpd-gpio in DT
399[ 0.967936] tegradc tegradc.0: parse_disp_default_out: No parent clk. Using default clk
400[ 0.968007] tegradc tegradc.0: DT parsed successfully
401[ 0.968051] tegradc tegradc.0: Display dc.ffffff800aac0000 registered with id=0
402[ 0.968870] tegradc tegradc.0: prod settings missing -19
403[ 0.969231] tegradc tegradc.0: pad_ab_default not found -19
404[ 0.969241] tegradc tegradc.0: pad_ab_idle not found -19
405[ 0.969249] tegradc tegradc.0: pad_cd_default not found -19
406[ 0.969256] tegradc tegradc.0: pad_cd_idle not found -19
407[ 0.970618] tegradc tegradc.0: probed
408[ 0.971337] Console: switching to colour frame buffer device 90x80
409[ 0.971407] tegradc tegradc.0: fb registered
410[ 0.971702] tegra124-dfll 70110000.clock: couldn't get vdd_cpu regulator
411[ 0.976997] tegra-apbdma 60020000.dma: Tegra20 APB DMA driver register 32 channels
412[ 0.977954] tegra-fuse-burn 7000f800.efuse:efuse-burn: Fuse burn driver initialized
413[ 0.978307] kfuse 7000fc00.kfuse: initialized
414[ 0.980403] tegra-pmc-iopower pmc-iopower: NO_IOPOWER setting 0x0
415[ 0.981850] Serial: 8250/16550 driver, 8 ports, IRQ sharing disabled
416[ 0.981950] No Device Node present for smmu client: serial8250 !!
417[ 0.981961] platform serial8250: No iommus property found in DT node, got swgids from fixup(101004000)
418[ 0.982000] iommu: Adding device serial8250 to group 33
419[ 0.986138] 70006000.serial: ttyS0 at MMIO 0x70006000 (irq = 62, base_baud = 25500000) is a Tegra
420[ 0.987356] 70006040.serial: ttyTHS1 at MMIO 0x70006040 (irq = 63, base_baud = 0) is a TEGRA_UART
421[ 0.987560] serial serial0: tty port ttyTHS1 registered
422[ 0.987822] 70006200.serial: ttyTHS2 at MMIO 0x70006200 (irq = 64, base_baud = 0) is a TEGRA_UART
423[ 0.988013] serial serial1: tty port ttyTHS2 registered
424[ 0.988162] serial-tegra 70006300.serial: RX in PIO mode
425[ 0.988283] 70006300.serial: ttyTHS3 at MMIO 0x70006300 (irq = 65, base_baud = 0) is a TEGRA_UART
426[ 1.035668] tegradc tegradc.0: nominal-pclk:77903000 parent:77902441 div:1.0 pclk:77902441 77123970~84914270
427[ 1.036322] tegradc tegradc.0: DSI: HS clock rate is 234000
428[ 1.060906] brd: module loaded
429[ 1.067409] loop: module loaded
430[ 1.071121] nbd: registered device at major 43
431[ 1.080420] zram: Added device: zram0
432[ 1.081306] tegra_profiler: version: 1.139, samples/io: 47/27
433[ 1.081454] tegra_profiler: auth: init
434[ 1.081928] nct1008_nct72 0-004c: starting parse dt
435[ 1.082017] nct1008_nct72 0-004c: !!!Found deprecated property!!!
436[ 1.082027] nct1008_nct72 0-004c: success parsing dt
437[ 1.082271] nct1008_nct72 0-004c: success in enabling tmp451 VDD rail
438[ 1.082780] hisi_sas: driver version v1.6
439[ 1.088835] libphy: Fixed MDIO Bus: probed
440[ 1.089828] tun: Universal TUN/TAP device driver, 1.6
441[ 1.089835] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
442[ 1.090785] e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k
443[ 1.090790] e1000e: Copyright(c) 1999 - 2015 Intel Corporation.
444[ 1.090867] igb: Intel(R) Gigabit Ethernet Network Driver - version 5.4.0-k
445[ 1.090872] igb: Copyright (c) 2007-2014 Intel Corporation.
446[ 1.090941] igbvf: Intel(R) Gigabit Virtual Function Network Driver - version 2.4.0-k
447[ 1.090946] igbvf: Copyright (c) 2009 - 2012 Intel Corporation.
448[ 1.091015] Intel(R) 10GbE PCI Express Linux Network Driver - version 4.6.4
449[ 1.091020] Copyright(c) 1999 - 2017 Intel Corporation.
450[ 1.095261] sky2: driver version 1.30
451[ 1.096156] PPP generic driver version 2.4.2
452[ 1.096365] PPP BSD Compression module registered
453[ 1.096372] PPP Deflate Compression module registered
454[ 1.096399] PPP MPPE Compression module registered
455[ 1.096408] NET: Registered protocol family 24
456[ 1.096417] pegasus: v0.9.3 (2013/04/25), Pegasus/Pegasus II USB Ethernet driver
457[ 1.096506] usbcore: registered new interface driver pegasus
458[ 1.096565] usbcore: registered new interface driver rtl8150
459[ 1.096631] usbcore: registered new interface driver asix
460[ 1.096688] usbcore: registered new interface driver ax88179_178a
461[ 1.096748] usbcore: registered new interface driver cdc_ether
462[ 1.096806] usbcore: registered new interface driver dm9601
463[ 1.096870] usbcore: registered new interface driver CoreChips
464[ 1.096936] usbcore: registered new interface driver smsc75xx
465[ 1.097004] usbcore: registered new interface driver smsc95xx
466[ 1.097066] usbcore: registered new interface driver net1080
467[ 1.097123] usbcore: registered new interface driver plusb
468[ 1.097178] usbcore: registered new interface driver cdc_subset
469[ 1.097233] usbcore: registered new interface driver zaurus
470[ 1.097290] usbcore: registered new interface driver MOSCHIP usb-ethernet driver
471[ 1.097366] usbcore: registered new interface driver cdc_ncm
472[ 1.097424] usbcore: registered new interface driver r8152
473[ 1.097631] VFIO - User Level meta-driver version: 0.3
474[ 1.099365] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
475[ 1.099386] ehci-pci: EHCI PCI platform driver
476[ 1.099451] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
477[ 1.099466] ohci-pci: OHCI PCI platform driver
478[ 1.099527] ohci-platform: OHCI generic platform driver
479[ 1.101894] tegra-xusb 70090000.xusb: USB2 port 0 has OTG_CAP
480[ 1.101904] tegra-xusb 70090000.xusb: USB3 port 0 has OTG_CAP
481[ 1.103448] tegra-xusb-padctl 7009f000.xusb_padctl: enabled OTG on UTMI pad 0
482[ 1.104605] tegra-xusb 70090000.xusb: extcon 0: ffffffc0f9e9f878 id
483[ 1.104736] tegra-xusb 70090000.xusb: Direct firmware load for tegra21x_xusb_firmware failed with error -2
484[ 1.104777] tegra-xusb 70090000.xusb: Falling back to user helper
485[ 1.105677] usbcore: registered new interface driver usb_ehset_test
486[ 1.109855] tegra-xudc-new 700d0000.xudc: device count: 1
487[ 1.111318] tegra-xudc-new 700d0000.xudc: USB charger detection disabled
488[ 1.111334] tegra-xudc-new 700d0000.xudc: vbus state: 0
489[ 1.111371] tegra-xudc-new 700d0000.xudc: entering ELPG
490[ 1.111737] tegra-xudc-new 700d0000.xudc: entering ELPG done
491[ 1.112484] mousedev: PS/2 mouse device common for all mice
492[ 1.112878] joycon-serdev: init
493[ 1.112992] joycon_serdev serial0-0: joycon_serdev_probe
494[ 1.113006] usbcore: registered new interface driver xpad
495[ 1.113061] usbcore: registered new interface driver usb_acecad
496[ 1.113113] usbcore: registered new interface driver aiptek
497[ 1.113169] usbcore: registered new interface driver gtco
498[ 1.113182] joycon_serdev serial1-0: joycon_serdev_probe
499[ 1.113230] usbcore: registered new interface driver hanwang
500[ 1.113285] usbcore: registered new interface driver kbtab
501[ 1.113448] fts_touch 2-0049: Failed to get tspid gpio
502[ 1.113485] fts_touch 2-0049: Failed to get tspid2 gpio
503[ 1.113512] fts_touch 2-0049: Failed to get grip_area property
504[ 1.113537] fts_touch 2-0049: skipped to get num_lines property
505[ 1.113560] fts_touch 2-0049: Failed to get regulator_dvdd name property
506[ 1.113585] fts_touch 2-0049: Failed to get vdd_gpio gpio
507[ 1.113641] fts_touch 2-0049: vio_gpio :0
508[ 1.113663] fts_touch 2-0049: skipped to get project_name property
509[ 1.113687] fts_touch 2-0049: skipped to get model_name property
510[ 1.113799] fts_touch 2-0049: FTS Support Hover Event
511[ 1.113810] fts_touch 2-0049: Didn't find switch_gpio = -2
512[ 1.113939] fts_touch 2-0049: fts_power_ctrl: on
513[ 1.115258] nct1008_nct72 0-004c: LOC shutdown limit 120
514[ 1.116783] nct1008_nct72 0-004c: EXT shutdown limit 105
515[ 1.145744] fts_touch 2-0049: FTS Enable WBCRC
516[ 1.151037] nct1008_nct72 0-004c: initial LOC temp: 32000
517[ 1.151984] nct1008_nct72 0-004c: initial EXT temp: 32750
518[ 1.153865] nct1008_nct72 0-004c: hi_b:0, lo_b:0
519[ 1.155141] nct1008_nct72 0-004c: nct1008_probe: initialized
520[ 1.156112] fts_touch 2-0049: FTS SystemReset
521[ 1.166686] fts_touch 2-0049: FTS INT Enable
522[ 1.167209] fts_touch 2-0049: fts_wait_for_ready: 10, 00, 00, 00, 00, 0F, 00, 00
523[ 1.167833] fts_touch 2-0049: IC Firmware Version : 0x0000 [v0.00] IC Config Version : 0x0000 IC Main Version : 0x0000 AFE Version : 0x00
524[ 1.167843] fts_touch 2-0049: product id : [00 00 00]
525[ 1.167854] fts_touch 2-0049: Chip reveion : 0, fpc : 0, t_sensor: 0 site : 0 , inspector_no : 0
526[ 1.167863] fts_touch 2-0049: date : 00.00.00 00:00:00
527[ 1.168221] fts_touch 2-0049: FTS B60004 = 36 70 01 00 81 06
528[ 1.168248] fts_touch 2-0049: FTS Chip ID : 36 70
529[ 1.168255] fts_touch 2-0049: disable_irq
530[ 1.168278] fts_touch 2-0049: fts_fw_init
531[ 1.168384] fts_touch 2-0049: FTS Command (97) , ret = 1
532[ 1.168921] fts_touch 2-0049: get_afe_status: Final AFE [Data : 0] AFE Ver [Data : 0]
533[ 1.169200] fts_touch 2-0049: get_pure_autotune_status: PureAutotune Information !! [Data : 0 0]
534[ 1.169210] fts_touch 2-0049: fts_execute_autotune: AFE(0), NoNeedAutoTune(0)
535[ 1.169312] fts_touch 2-0049: FTS Command (A3) , ret = 1
536[ 1.263342] tegradc tegradc.1: disp1 connected to head1->/host1x/sor1
537[ 1.263436] tegradc tegradc.1: No lt-data, using default setting
538[ 1.263466] tegradc tegradc.1: No hpd-gpio in DT
539[ 1.263512] tegradc tegradc.1: DT parsed successfully
540[ 1.263556] tegradc tegradc.1: Display dc.ffffff800abc0000 registered with id=1
541[ 1.771265] Host read timeout at address 540400c4
542[ 1.772804] tegradc tegradc.1: probed
543[ 1.773151] tegradc tegradc.1: fb registered
544[ 1.776317] hpd: state 7 (Takeover from bootloader), hpd 0, pending_hpd_evt 1
545[ 1.776326] hpd: switching from state 7 (Takeover from bootloader) to state 0 (Reset)
546[ 1.776338] hpd: state 0 (Reset), hpd 0, pending_hpd_evt 0
547[ 1.776353] tegradc tegradc.1: blank - powerdown
548[ 1.776416] extcon-disp-state extcon:disp-state: cable 44 state 0 already set.
549[ 1.776422] Extcon DP: HPD disabled
550[ 1.776427] hpd: hpd_switch 0
551[ 1.776434] hpd: switching from state 0 (Reset) to state 1 (Check Plug)
552[ 1.776447] hpd: state 1 (Check Plug), hpd 0, pending_hpd_evt 0
553[ 1.776456] hpd: switching from state 1 (Check Plug) to state 3 (Disabled)
554[ 1.799156] bq2419x 0-006b: Thermal Zone registration success
555[ 1.830177] fts_touch 2-0049: FTS Command (A4) , ret = 1
556[ 1.989761] tegra_cec 70015000.tegra_cec: Can't find physical addresse.
557[ 1.989770] tegra_cec 70015000.tegra_cec: tegra_cec_init Done.
558[ 2.206159] fts_touch 2-0049: FTS Command (FC) , ret = 1
559[ 2.446072] fts_touch 2-0049: FTS Enable WBCRC
560[ 2.456267] fts_touch 2-0049: FTS SystemReset
561[ 2.494071] fts_touch 2-0049: fts_wait_for_ready: 10, 00, 00, 00, 00, 0F, 00, 00
562[ 2.494192] fts_touch 2-0049: FTS Command (93) , ret = 1
563[ 2.550066] fts_touch 2-0049: FTS INT Enable
564[ 2.550252] fts_touch 2-0049: enable_irq
565[ 2.556101] fts_touch 2-0049: FTS Sense(32) Force(18)
566[ 2.556220] fts_touch 2-0049: FTS Command (93) , ret = 1
567[ 2.556243] fts_touch 2-0049: FTS INT Enable
568[ 2.556515] fts_touch 2-0049: FTS Command (A1) , ret = 1
569[ 2.556628] fts_touch 2-0049: FTS Command (91) , ret = 1
570[ 2.556740] fts_touch 2-0049: FTS Command (A2) , ret = 1
571[ 2.556988] fts_touch 2-0049: FTS ReadStatus(0x84) : 00 00 00 00
572[ 2.557011] fts_touch 2-0049: FTS Initialized
573[ 2.557244] input: touchscreen as /devices/7000c500.i2c/i2c-2/2-0049/input/input0
574[ 2.560477] input: max77620_onoff as /devices/7000d000.i2c/i2c-4/4-003c/max77620-onoff/input/input1
575[ 2.566470] fts_touch 2-0049: fts_debug_msg_event_handler: 16 05 00 23 00 00 00 00
576[ 2.580767] fts_touch 2-0049: [FTS] Received Force Calibration Self only Event
577[ 2.691683] rtc rtc0: invalid alarm value: 2099-2-30 23:16:59
578[ 2.691939] max77686-rtc max77620-rtc: rtc core: registered max77620-rtc as rtc0
579[ 2.694346] rtc rtc1: alarm rtc device
580[ 2.694369] tegra_rtc 7000e000.rtc: rtc core: registered 7000e000.rtc as rtc1
581[ 2.694414] tegra_rtc 7000e000.rtc: Tegra internal Real Time Clock
582[ 2.694999] i2c /dev entries driver
583[ 2.697066] IR NEC protocol handler initialized
584[ 2.697593] usbcore: registered new interface driver uvcvideo
585[ 2.697598] USB Video Class driver (1.1.1)
586[ 2.698030] max77620-power max77620-power: Event recorder REG_NVERC : 0x0
587[ 2.701982] tegra_soctherm 700e2000.soctherm: pllx_offset tz:0 max:14, min:2
588[ 2.701993] tegra_soctherm 700e2000.soctherm: pllx_offset tz:2 max:8, min:4
589[ 2.702495] tegra_soctherm 700e2000.soctherm: thermtrip: will shut down when cpu reaches 102500 mC
590[ 2.702509] tegra_soctherm 700e2000.soctherm: throttrip: will throttle when cpu reaches 98500 mC
591[ 2.702701] tegra_soctherm 700e2000.soctherm: soctherm: trip temperature -2147483647 forced to -127000
592[ 2.702716] tegra_soctherm 700e2000.soctherm: thermtrip: will shut down when gpu reaches 103000 mC
593[ 2.702727] tegra_soctherm 700e2000.soctherm: throttrip: will throttle when gpu reaches 100000 mC
594[ 2.702978] tegra_soctherm 700e2000.soctherm: soctherm: trip temperature -2147483647 forced to -127000
595[ 2.702987] tegra_soctherm 700e2000.soctherm: soctherm: trip temperature 2147483647 forced to 127000
596[ 2.702999] tegra_soctherm 700e2000.soctherm: thermtrip: will shut down when pll reaches 127000 mC
597[ 2.703007] tegra_soctherm 700e2000.soctherm: throttrip: pll: missing hot temperature
598[ 2.703229] tegra_soctherm 700e2000.soctherm: soctherm: trip temperature -2147483647 forced to -127000
599[ 2.703243] tegra_soctherm 700e2000.soctherm: thermtrip: will shut down when mem reaches 127000 mC
600[ 2.703251] tegra_soctherm 700e2000.soctherm: throttrip: mem: missing hot temperature
601[ 2.704141] tegra_aotag tegra-aotag: Registering sensor 0
602[ 2.704207] tegra_aotag tegra-aotag: Invalid temp readout
603[ 2.704220] tegra_aotag tegra-aotag: Bound to TZ : ID 0
604[ 2.704236] tegra_aotag tegra-aotag: Probe done [SUCCESS]:0
605[ 2.706282] parse_throttle_dt_data: Num cap clks = 6
606[ 2.706292] parse_throttle_dt_data: clk=cclk_g type=2
607[ 2.706304] parse_throttle_dt_data: clk=gpu type=4
608[ 2.706339] parse_throttle_dt_data: clk=cap.throttle.c2bus type=0
609[ 2.706371] parse_throttle_dt_data: clk=cap.throttle.c3bus type=0
610[ 2.706407] parse_throttle_dt_data: clk=cap.throttle.sclk type=0
611[ 2.706414] parse_throttle_dt_data: clk=emc type=3
612[ 2.708165] tegra_soctherm 700e2000.soctherm: soctherm: trip temperature -2147483647 forced to -127000
613[ 2.708400] tegra_throttle_probe: probe successful. #cdevs=4
614[ 2.710675] device-mapper: uevent: version 1.0.3
615[ 2.711410] device-mapper: ioctl: 4.35.0-ioctl (2016-06-23) initialised: dm-devel@redhat.com
616[ 2.711549] device-mapper: verity-avb: AVB error handler initialized with vbmeta device:
617[ 2.711558] Bluetooth: HCI UART driver ver 2.3
618[ 2.711566] Bluetooth: HCI UART protocol LL registered
619[ 2.712519] tegra210-cpufreq cpufreq: probe()...err:-517
620[ 2.714486] sdhci: Secure Digital Host Controller Interface driver
621[ 2.714491] sdhci: Copyright(c) Pierre Ossman
622[ 2.714599] sdhci-pltfm: SDHCI platform and OF driver helper
623[ 2.715694] sdhci-tegra sdhci-tegra.0: Got CD GPIO
624[ 2.716582] sdhci-tegra sdhci-tegra.0: Client registration for eMC Successful
625[ 2.722463] hidraw: raw HID events driver (C) Jiri Kosina
626[ 2.730117] usbcore: registered new interface driver usbhid
627[ 2.730124] usbhid: USB HID core driver
628[ 2.731381] tegra-i2c 7000c400.i2c: no acknowledge from address 0x44
629[ 2.731463] ina230x 1-0044: ina230 reset failed: -121
630[ 2.731760] ina230x: probe of 1-0044 failed with error -121
631[ 2.732409] tegra-i2c 7000c400.i2c: no acknowledge from address 0x41
632[ 2.732474] ina230x 1-0041: ina230 reset failed: -121
633[ 2.732674] ina230x: probe of 1-0041 failed with error -121
634[ 2.733249] tegra-i2c 7000c400.i2c: no acknowledge from address 0x45
635[ 2.733308] ina230x 1-0045: ina230 reset failed: -121
636[ 2.733519] ina230x: probe of 1-0045 failed with error -121
637[ 2.734114] tegra-i2c 7000c400.i2c: no acknowledge from address 0x40
638[ 2.734175] ina230x 1-0040: ina230 reset failed: -121
639[ 2.734378] ina230x: probe of 1-0040 failed with error -121
640[ 2.734910] tegra-i2c 7000c400.i2c: no acknowledge from address 0x46
641[ 2.734973] ina230x 1-0046: ina230 reset failed: -121
642[ 2.735156] ina230x: probe of 1-0046 failed with error -121
643[ 2.735723] tegra-i2c 7000c400.i2c: no acknowledge from address 0x48
644[ 2.735784] ina230x 1-0048: ina230 reset failed: -121
645[ 2.735984] ina230x: probe of 1-0048 failed with error -121
646[ 2.736578] tegra-i2c 7000c400.i2c: no acknowledge from address 0x49
647[ 2.736643] ina230x 1-0049: ina230 reset failed: -121
648[ 2.736835] ina230x: probe of 1-0049 failed with error -121
649[ 2.737418] tegra-i2c 7000c400.i2c: no acknowledge from address 0x4a
650[ 2.737479] ina230x 1-004a: ina230 reset failed: -121
651[ 2.737672] ina230x: probe of 1-004a failed with error -121
652[ 2.738227] tegra-i2c 7000c400.i2c: no acknowledge from address 0x4b
653[ 2.738288] ina230x 1-004b: ina230 reset failed: -121
654[ 2.738476] ina230x: probe of 1-004b failed with error -121
655[ 2.738989] tegra-i2c 7000c400.i2c: no acknowledge from address 0x4d
656[ 2.739050] ina230x 1-004d: ina230 reset failed: -121
657[ 2.739237] ina230x: probe of 1-004d failed with error -121
658[ 2.739796] ashmem: initialized
659[ 2.740190] tegra-nvdumper: probe of nvdumper failed with error -524
660[ 2.743010] nvadsp 702ef000.adsp: in probe()...
661[ 2.743791] nvadsp 702ef000.adsp: nvadsp_app_module_probe
662[ 2.769965] mmc0: SDHCI controller on sdhci-tegra.0 [sdhci-tegra.0] using ADMA 64-bit with 64 bit addr
663[ 2.955482] sysfs: cannot create duplicate filename '/devices/7000da00.spi/spi_master/spi3/spi3.0/iio_device'
664[ 2.955555] ------------[ cut here ]------------
665[ 2.955594] WARNING: CPU: 3 PID: 1 at ../../../../../../kernel/nvidia/linux-4.9/kernel/kernel-4.9/fs/sysfs/dir.c:31 sysfs_warn_dup+0x68/0x88
666[ 2.955621] Modules linked in:
667[ 2.955645]
668[ 2.955666] CPU: 3 PID: 1 Comm: swapper/0 Not tainted 4.9.140-gb4a62f0eb099 #1
669[ 2.955690] Hardware name: icosa (DT)
670[ 2.955709] task: ffffffc0faef8000 task.stack: ffffffc0faf80000
671[ 2.955731] PC is at sysfs_warn_dup+0x68/0x88
672[ 2.955750] LR is at sysfs_warn_dup+0x68/0x88
673[ 2.955770] pc : [<ffffff8008485738>] lr : [<ffffff8008485738>] pstate: 60400045
674[ 2.955790] sp : ffffffc0faf83a20
675[ 2.955807] x29: ffffffc0faf83a20 x28: ffffffc0f7862800
676[ 2.955842] x27: 0000000000000000 x26: ffffff8008e86000
677[ 2.955873] x25: 0000000000000000 x24: ffffff80092b1bd0
678[ 2.955903] x23: 0000000000000001 x22: ffffff80096a34b8
679[ 2.955933] x21: ffffffc0f7ce54b0 x20: ffffff80096a34b8
680[ 2.955962] x19: ffffffc0f9df6000 x18: ffffffffffffffff
681[ 2.955991] x17: 0000000000000000 x16: 0000000000000000
682[ 2.956018] x15: ffffff8009f78290 x14: 306164303030372f
683[ 2.956046] x13: 736563697665642f x12: 2720656d616e656c
684[ 2.956074] x11: 6966206574616369 x10: 6c70756420657461
685[ 2.956103] x9 : 0000000000000297 x8 : 0000000000000074
686[ 2.956131] x7 : ffffff8009fcf5b0 x6 : 0000000000000071
687[ 2.956158] x5 : 0000000000000000 x4 : 0000000000000000
688[ 2.956186] x3 : ffffffffffffffff x2 : 000000000004098c
689[ 2.956214] x1 : 0000000000000000 x0 : 0000000000000061
690[ 2.956241]
691[ 2.956260] ---[ end trace 10c592876561f1e7 ]---
692[ 2.956279] Call trace:
693[ 2.956298] [<ffffff8008485738>] sysfs_warn_dup+0x68/0x88
694[ 2.956321] [<ffffff8008485c18>] sysfs_do_create_link_sd.isra.0+0xe0/0xe8
695[ 2.956343] [<ffffff8008485c60>] sysfs_create_link+0x40/0x68
696[ 2.956370] [<ffffff8008e88918>] iio_device_register+0x540/0x650
697[ 2.956392] [<ffffff8008e88a78>] devm_iio_device_register+0x50/0xa0
698[ 2.956415] [<ffffff8008e8f280>] st_lsm6dsx_probe+0x320/0x380
699[ 2.956438] [<ffffff8008e90108>] st_lsm6dsx_spi_probe+0x38/0x48
700[ 2.956464] [<ffffff8008a5f3c0>] spi_drv_probe+0x80/0xf8
701[ 2.956489] [<ffffff8008972ab8>] driver_probe_device+0xd0/0x3f8
702[ 2.956509] [<ffffff8008972f04>] __driver_attach+0x124/0x128
703[ 2.956533] [<ffffff8008970410>] bus_for_each_dev+0x88/0xe8
704[ 2.956553] [<ffffff80089722a8>] driver_attach+0x30/0x40
705[ 2.956573] [<ffffff8008971c70>] bus_add_driver+0x1c8/0x2a8
706[ 2.956594] [<ffffff8008973ec0>] driver_register+0x68/0x100
707[ 2.956615] [<ffffff8008a5f2dc>] __spi_register_driver+0x6c/0x78
708[ 2.956643] [<ffffff80097fde44>] st_lsm6dsx_driver_init+0x18/0x20
709[ 2.956666] [<ffffff8008203bac>] do_one_initcall+0x5c/0x168
710[ 2.956692] [<ffffff80097a0dd0>] kernel_init_freeable+0x1b0/0x250
711[ 2.956717] [<ffffff8009156708>] kernel_init+0x18/0x108
712[ 2.956739] [<ffffff80082038d0>] ret_from_fork+0x10/0x40
713[ 2.956765] st_lsm6dsx_spi spi3.0: Failed to create link for iio_device -17
714[ 2.959732] tegra_hv: get_hvd: not initialized yet
715[ 2.959743] user_ivc_mempool: hypervisor not present
716[ 2.959750] hvc_sysfs: hypervisor is not present
717[ 2.960222] usbcore: registered new interface driver snd-usb-audio
718[ 2.960340] No Device Node present for smmu client: snd-soc-dummy !!
719[ 2.960352] platform snd-soc-dummy: No iommus property found in DT node, got swgids from fixup(101004000)
720[ 2.960402] iommu: Adding device snd-soc-dummy to group 34
721[ 2.963208] sch_tegra_init
722[ 2.963215] u32 classifier
723[ 2.963220] Actions configured
724[ 2.963230] Netfilter messages via NETLINK v0.30.
725[ 2.963758] nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
726[ 2.964090] ctnetlink v0.93: registering with nfnetlink.
727[ 2.965052] xt_time: kernel timezone is -0000
728[ 2.965200] IPv4 over IPsec tunneling driver
729[ 2.966083] ip_tables: (C) 2000-2006 Netfilter Core Team
730[ 2.966377] arp_tables: arp_tables: (C) 2002 David S. Miller
731[ 2.966444] Initializing XFRM netlink socket
732[ 2.968332] NET: Registered protocol family 10
733[ 2.970083] mip6: Mobile IPv6
734[ 2.970116] ip6_tables: (C) 2000-2006 Netfilter Core Team
735[ 2.971304] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver
736[ 2.972924] NET: Registered protocol family 17
737[ 2.972951] NET: Registered protocol family 15
738[ 2.973132] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this.
739[ 2.973144] Bluetooth: HIDP (Human Interface Emulation) ver 1.2
740[ 2.973159] Bluetooth: HIDP socket layer initialized
741[ 2.973166] 8021q: 802.1Q VLAN Support v1.8
742[ 2.973211] Key type dns_resolver registered
743[ 2.973756] Registered cp15_barrier emulation handler
744[ 2.973774] Registered setend emulation handler
745[ 2.976957] registered taskstats version 1
746[ 2.977432] Adding domain ve2-pd to PM domain host1x-pd
747[ 2.977876] Adding domain ve-pd to PM domain host1x-pd
748[ 2.981838] isp 54600000.isp: initialized
749[ 2.981966] driver not enabled, cannot register any devices
750[ 2.983503] isp 54680000.isp: initialized
751[ 2.983592] driver not enabled, cannot register any devices
752[ 3.014119] last reset is due to pmic watchdog timeout
753[ 3.014130] KERNEL: PMC reset status reg: 0x5
754[ 3.015001] cpuidle-tegra210 cpuidle: vdd-cpu regulator get failed
755[ 3.015691] right-joycon-charger: no parameters
756[ 3.016447] left-joycon-charger: no parameters
757[ 3.017177] vdd-wlreg_on: 1800 mV
758[ 3.019247] max8973 4-001b: CHIP-ID OTP: 0x01 ID_M: 0x01
759[ 3.020776] vdd-cpu: 618 <--> 1400 mV at 950 mV at 15000 mA
760[ 3.021875] max8973 4-001b: Failed to register thermal sensor: -19
761[ 3.022327] max8973 4-001c: CHIP-ID OTP: 0x01 ID_M: 0x01
762[ 3.023903] vdd-gpu: applied init 1000000uV constraint
763[ 3.024158] vdd-gpu: 618 <--> 1150 mV at 1000 mV at 9000 mA
764[ 3.025164] max8973 4-001c: Failed to register thermal sensor: -19
765[ 3.027623] mmc0: host does not support reading read-only switch, assuming write-enable
766[ 3.028247] tegra124-dfll 70110000.clock: failed to read DT parameter nvidia,pmic-undershoot-gb: -22
767[ 3.033143] joycon_serdev serial0-0: joycon_serdev_probe
768[ 3.033146] joycon_serdev serial1-0: joycon_serdev_probe
769[ 3.035217] thermal thermal_zone1: binding zone CPU-therm with cdev DFLL-cap failed:-17
770[ 3.035358] tegra_soctherm 700e2000.soctherm: soctherm: trip temperature -2147483647 forced to -127000
771[ 3.035373] tegra_dfll_action dfll-cdev-cap: Tegra DFLL 'cap cooling device' registered
772[ 3.036023] thermal thermal_zone1: binding zone CPU-therm with cdev DFLL-floor failed:-22
773[ 3.036095] tegra_dfll_action dfll-cdev-floor: Tegra DFLL 'floor cooling device' registered
774[ 3.036625] joycon_serdev serial1-0: probe complete
775[ 3.037758] joycon_serdev serial0-0: probe complete
776[ 3.038209] joycon_serdev serial1-0: joycon MAC = 60:6B:FF:79:AB:ED
777[ 3.038217] joycon_serdev serial1-0: Increasing joy-con baud to 3125000bps
778[ 3.039302] joycon_serdev serial0-0: joycon MAC = 60:6B:FF:79:24:0C
779[ 3.039310] joycon_serdev serial0-0: Increasing joy-con baud to 3125000bps
780[ 3.087410] tegra210-cpufreq cpufreq: probe()...completed
781[ 3.094962] cpuidle-tegra210 cpuidle: retention voltage is 606250 uv
782[ 3.095693] clk_cbus_recalc_rate: no gbus parent
783[ 3.095698] clk_cbus_round_rate: no gbus parent
784[ 3.095701] clk_cbus_round_rate: no gbus parent
785[ 3.095704] clk_cbus_recalc_rate: no gbus parent
786[ 3.097897] clk_cbus_recalc_rate: no gbus parent
787[ 3.097901] clk_cbus_round_rate: no gbus parent
788[ 3.097903] clk_cbus_round_rate: no gbus parent
789[ 3.097907] clk_cbus_recalc_rate: no gbus parent
790[ 3.097915] tegra_dvfs: GPU-cap: registered
791[ 3.097969] tegra dvfs: vdd-cpu: nominal 1225mV, offset 618750uV, step 6250uV, scaling enabled
792[ 3.097972] tegra dvfs: vdd-core: nominal 1075mV, offset 825000uV, step 12500uV, scaling enabled
793[ 3.097975] tegra dvfs: vdd-gpu: nominal 1043mV, offset 618750uV, step 6250uV, scaling enabled
794[ 3.106917] tegra_dvfs: vdd-gpu-vts: registered
795[ 3.112537] tegra_core_action core_dvfs_cdev_floor: Tegra CORE DVFS 'floor cooling device' registered
796[ 3.113186] tegra_core_action core_dvfs_cdev_cap: Tegra CORE DVFS 'cap cooling device' registered
797[ 3.113581] input: gpio-keys as /devices/gpio-keys/input/input2
798[ 3.146529] tegra_rtc 7000e000.rtc: setting system clock to 2020-01-20 20:59:52 UTC (1579553992)
799[ 3.147190] power-supply-extcon psy_extcon: Extcon name (null)
800[ 3.147350] power-supply-extcon psy_extcon: No cable detected
801[ 3.147357] power-supply-extcon psy_extcon: psy_extcon_probe() get success
802[ 3.147881] Disable partitions left on by BL
803[ 3.147884] disb
804[ 3.148030] bwmgr: missing cdev-type property
805[ 3.148573] DRAM derating cdev registered.
806[ 3.149651] vdd-cpu-fixed: disabling
807[ 3.149660] vdd-gc-3v1: disabling
808[ 3.149783] vdd-gc-1v8: disabling
809[ 3.149897] batt_regulator: disabling
810[ 3.150366] v_vdd50_a: disabling
811[ 3.150369] v_vdd50_b: disabling
812[ 3.150371] vdd3v3_gc: disabling
813[ 3.150374] right-joycon-charger: disabling
814[ 3.150376] left-joycon-charger: disabling
815[ 3.150382] ALSA device list:
816[ 3.150384] No soundcards found.
817[ 3.150539] Waiting for root device /dev/mmcblk0p4...
818[ 3.171713] joycon_serdev serial1-0: completed handshake
819[ 3.220484] mmc0: Applying tuning correction
820[ 3.220499] mmc0: Tap value after applying correction 58
821[ 3.220517] mmc0: hw tuning done ...
822[ 3.220551] mmc0: new ultra high speed SDR104 SDXC card at address 59b4
823[ 3.220820] mmcblk0: mmc0:59b4 GFAQK 477 GiB
824[ 3.223896] mmcblk0: p1 p2 p3 p4 p5 p6 p7 p8 p9 p10 p11
825[ 3.228283] joycon_serdev serial1-0: Detected left joy-con
826[ 3.259085] EXT4-fs (mmcblk0p4): warning: mounting unchecked fs, running e2fsck is recommended
827[ 3.273549] input: Nintendo Switch Left Joy-Con Serial as /devices/70006200.serial/serial1/serial1-0/input/input3
828[ 3.273636] joycon_serdev serial1-0: post detect - success
829[ 3.294578] EXT4-fs (mmcblk0p4): mounted filesystem without journal. Opts: (null)
830[ 3.294596] VFS: Mounted root (ext4 filesystem) on device 179:4.
831[ 3.295149] devtmpfs: mounted
832[ 3.298145] Freeing unused kernel memory: 8000K
833[ 3.307308] random: init: uninitialized urandom read (40 bytes read)
834[ 3.331566] init: init first stage started!
835[ 3.332009] init: Using Android DT directory /proc/device-tree/firmware/android/
836[ 3.335553] init: [libfs_mgr]fs_mgr_read_fstab_default(): failed to find device default fstab
837[ 3.370152] EXT4-fs (mmcblk0p3): mounted filesystem without journal. Opts: (null)
838[ 3.370230] init: [libfs_mgr]__mount(source=/dev/block/platform/sdhci-tegra.0/by-name/vendor,target=/vendor,type=ext4)=0: Success
839[ 3.370313] init: Skipped setting INIT_AVB_VERSION (not in recovery mode)
840[ 3.370404] init: Loading SELinux policy
841[ 3.384680] SELinux: 8192 avtab hash slots, 17819 rules.
842[ 3.389046] SELinux: 8192 avtab hash slots, 17819 rules.
843[ 3.389052] SELinux: 1 users, 4 roles, 1297 types, 0 bools, 1 sens, 1024 cats
844[ 3.389059] SELinux: 93 classes, 17819 rules
845[ 3.390304] SELinux: Completing initialization.
846[ 3.390306] SELinux: Setting up existing superblocks.
847[ 3.465006] audit: type=1403 audit(1579553992.811:2): policy loaded auid=4294967295 ses=4294967295
848[ 3.465123] selinux: SELinux: Loaded policy from /vendor/etc/selinux/precompiled_sepolicy
849[ 3.465123]
850[ 3.468295] selinux: SELinux: Loaded file_contexts
851[ 3.468295]
852[ 3.469152] random: init: uninitialized urandom read (40 bytes read)
853[ 3.476246] init: init second stage started!
854[ 3.481803] joycon_serdev serial0-0: completed handshake
855[ 3.483546] init: Using Android DT directory /proc/device-tree/firmware/android/
856[ 3.484199] init: Init cannot set 'ro.boot.hardware' to 'icosa': Read-only property was already set
857[ 3.485769] selinux: SELinux: Loaded file_contexts
858[ 3.485769]
859[ 3.485782] init: Running restorecon...
860[ 3.488899] init: waitid failed: No child processes
861[ 3.493409] init: Unable to set property '' to '' in property file '/product/build.prop': Illegal property name
862[ 3.493455] init: Couldn't load property file '/odm/default.prop': open() failed: No such file or directory: No such file or directory
863[ 3.494308] init: Created socket '/dev/socket/property_service', mode 666, user 0, group 0
864[ 3.496135] init: Forked subcontext for 'u:r:vendor_init:s0' with pid 2058
865[ 3.497359] random: init: uninitialized urandom read (40 bytes read)
866[ 3.541945] joycon_serdev serial0-0: Detected right joy-con
867[ 3.553543] ueventd: ueventd started!
868[ 3.554989] selinux: SELinux: Loaded file_contexts
869[ 3.554989]
870[ 3.555164] ueventd: Parsing file /ueventd.rc...
871[ 3.556071] ueventd: Parsing file /vendor/ueventd.rc...
872[ 3.557478] ueventd: /vendor/ueventd.rc: 117: /sys/ lines must have 5 entries
873[ 3.557509] ueventd: /vendor/ueventd.rc: 118: /sys/ lines must have 5 entries
874[ 3.557530] ueventd: /vendor/ueventd.rc: 119: /sys/ lines must have 5 entries
875[ 3.557550] ueventd: /vendor/ueventd.rc: 120: /sys/ lines must have 5 entries
876[ 3.557570] ueventd: /vendor/ueventd.rc: 121: /sys/ lines must have 5 entries
877[ 3.557589] ueventd: /vendor/ueventd.rc: 122: /sys/ lines must have 5 entries
878[ 3.587065] input: Nintendo Switch Right Joy-Con Serial as /devices/70006040.serial/serial0/serial0-0/input/input4
879[ 3.587165] audit: type=1400 audit(1579553992.935:3): avc: denied { write } for pid=32 comm="kdevtmpfs" name="input" dev="devtmpfs" ino=1253 scontext=u:r:kernel:s0 tcontext=u:object_r:device:s0 tclass=dir permissive=1
880[ 3.587183] audit: type=1400 audit(1579553992.935:4): avc: denied { mknod } for pid=32 comm="kdevtmpfs" capability=27 scontext=u:r:kernel:s0 tcontext=u:r:kernel:s0 tclass=capability permissive=1
881[ 3.587197] audit: type=1400 audit(1579553992.935:5): avc: denied { add_name } for pid=32 comm="kdevtmpfs" name="event4" scontext=u:r:kernel:s0 tcontext=u:object_r:device:s0 tclass=dir permissive=1
882[ 3.587224] audit: type=1400 audit(1579553992.935:6): avc: denied { create } for pid=32 comm="kdevtmpfs" name="event4" scontext=u:r:kernel:s0 tcontext=u:object_r:device:s0 tclass=chr_file permissive=1
883[ 3.587256] audit: type=1400 audit(1579553992.935:7): avc: denied { setattr } for pid=32 comm="kdevtmpfs" name="event4" dev="devtmpfs" ino=9689 scontext=u:r:kernel:s0 tcontext=u:object_r:device:s0 tclass=chr_file permissive=1
884[ 3.587297] joycon_serdev serial0-0: post detect - success
885[ 3.609755] tegra-xusb 70090000.xusb: Firmware timestamp: 2019-05-08 09:42:10 UTC, Version: 50.22 release
886[ 3.609771] tegra-xusb 70090000.xusb: xHCI Host Controller
887[ 3.609787] tegra-xusb 70090000.xusb: new USB bus registered, assigned bus number 1
888[ 3.610494] tegra-xusb 70090000.xusb: hcc params 0x0184f525 hci version 0x100 quirks 0x00050010
889[ 3.610524] tegra-xusb 70090000.xusb: irq 60, io mem 0x70090000
890[ 3.610773] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
891[ 3.610777] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
892[ 3.610781] usb usb1: Product: xHCI Host Controller
893[ 3.610783] usb usb1: Manufacturer: Linux 4.9.140-gb4a62f0eb099 xhci-hcd
894[ 3.610786] usb usb1: SerialNumber: 70090000.xusb
895[ 3.610959] audit: type=1400 audit(1579553992.959:8): avc: denied { create } for pid=32 comm="kdevtmpfs" name="bus" scontext=u:r:kernel:s0 tcontext=u:object_r:device:s0 tclass=dir permissive=1
896[ 3.611177] hub 1-0:1.0: USB hub found
897[ 3.611205] hub 1-0:1.0: 5 ports detected
898[ 3.611550] tegra-xusb 70090000.xusb: xHCI Host Controller
899[ 3.611557] tegra-xusb 70090000.xusb: new USB bus registered, assigned bus number 2
900[ 3.611613] usb usb2: We don't know the algorithms for LPM for this host, disabling LPM.
901[ 3.611675] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003
902[ 3.611679] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
903[ 3.611682] usb usb2: Product: xHCI Host Controller
904[ 3.611685] usb usb2: Manufacturer: Linux 4.9.140-gb4a62f0eb099 xhci-hcd
905[ 3.611688] usb usb2: SerialNumber: 70090000.xusb
906[ 3.611970] hub 2-0:1.0: USB hub found
907[ 3.611993] hub 2-0:1.0: 4 ports detected
908[ 3.717863] usb usb1: usb_suspend_both: status 0
909[ 3.775976] keychord: using input dev max77620_onoff for fevent
910[ 3.775982] keychord: using input dev gpio-keys for fevent
911[ 3.783107] audit: type=1400 audit(1579553993.131:9): avc: denied { create } for pid=1 comm="init" name="sdcard" scontext=u:r:init:s0 tcontext=u:object_r:tmpfs:s0 tclass=lnk_file permissive=1
912[ 3.793278] Registered swp emulation handler
913[ 3.801325] audit: type=1400 audit(1579553993.147:10): avc: denied { write } for pid=2058 comm="init" name="legacy_va_layout" dev="proc" ino=14239 scontext=u:r:vendor_init:s0 tcontext=u:object_r:proc:s0 tclass=file permissive=1
914[ 3.807186] watchdogd: watchdogd started (interval 20, margin 160)!
915[ 3.807212] watchdogd: Failed to open /dev/watchdog: No such file or directory
916[ 3.833676] EXT4-fs (mmcblk0p9): mounted filesystem with ordered data mode. Opts: data=ordered,barrier=1,nodelalloc
917[ 3.841235] EXT4-fs (mmcblk0p10): Ignoring removed nomblk_io_submit option
918[ 3.847169] EXT4-fs (mmcblk0p10): mounted filesystem with ordered data mode. Opts: errors=remount-ro,nomblk_io_submit
919[ 3.971565] e2fsck: e2fsck 1.43.3 (04-Sep-2016)
920[ 3.971565]
921[ 3.971614] e2fsck: /dev/block/platform/sdhci-tegra.0/by-name/UDA: clean, 2543/1048576 files, 174722/4194304 blocks
922[ 3.971614]
923[ 3.975811] EXT4-fs (mmcblk0p10): barriers disabled
924[ 3.980198] EXT4-fs (mmcblk0p10): mounted filesystem with ordered data mode. Opts: data=ordered,barrier=0,noauto_da_alloc
925[ 3.985533] zram0: detected capacity change from 0 to 536870912
926[ 4.023775] mkswap: Swapspace size: 524284k, UUID=3bde18ba-639c-43ef-a1ff-2da71d291f91
927[ 4.024745] Adding 524284k swap on /dev/block/zram0. Priority:-1 extents:1 across:524284k SS
928[ 4.154330] tegra-pcie 1003000.pcie: 4x1, 1x1 configuration
929[ 4.154571] tegra-pcie 1003000.pcie: PCIE: Enable power rails
930[ 4.154761] tegra-pcie 1003000.pcie: probing port 0, using 4 lanes
931[ 4.156900] tegra-pcie 1003000.pcie: probing port 1, using 1 lanes
932[ 4.270909] nvgpu: 57000000.gpu gm20b_init_clk_setup_sw:1268 [INFO] GPCPLL initial settings: NA mode, M=1, N=34, P=3 (id = 1)
933[ 4.411799] usbcore: registered new interface driver usbserial
934[ 4.429897] usbcore: registered new interface driver ftdi_sio
935[ 4.429938] usbserial: USB Serial support registered for FTDI USB Serial Device
936[ 4.483942] input: tegra-hda HDMI/DP,pcm=3 as /devices/70030000.hda/sound/card0/input5
937[ 4.566216] tegra-adma 702e2000.adma: Tegra210 ADMA driver registered 11 channels
938[ 4.579768] tegra-pcie 1003000.pcie: link 0 down, retrying
939[ 4.630754] tegra210_adsp_audio_platform_probe: platform probe started
940[ 4.631809] tegra210-adsp tegra210-adsp: Default param-type to BYTE for mp3-dec1
941[ 4.632510] tegra210-adsp tegra210-adsp: Default param-type to BYTE for spkprot
942[ 4.633182] tegra210-adsp tegra210-adsp: Default param-type to BYTE for src
943[ 4.633885] tegra210-adsp tegra210-adsp: Default param-type to BYTE for aac-dec1
944[ 4.634551] tegra210-adsp tegra210-adsp: adma channel page address dt entry not found
945[ 4.634554] tegra210-adsp tegra210-adsp: using adma channel page 0
946[ 4.634644] Succssfully created NETLINK_ADSP_EVENT socket
947[ 4.634646] tegra210_adsp_audio_platform_probe probe successfull.
948[ 4.672323] tegra210-i2s tegra210-i2s.0: Missing prop fsync-width for I2S0
949[ 4.673789] tegra210-i2s tegra210-i2s.2: Missing prop fsync-width for I2S2
950[ 4.674298] tegra210-i2s tegra210-i2s.3: Missing prop fsync-width for I2S3
951[ 4.674787] tegra210-i2s tegra210-i2s.4: Missing prop fsync-width for I2S4
952[ 4.806460] OPE platform probe
953[ 4.806738] OPE platform probe successful
954[ 4.807113] OPE platform probe
955[ 4.807298] OPE platform probe successful
956[ 4.981761] tegra-pcie 1003000.pcie: link 0 down, retrying
957[ 5.369186] tegra-asoc: sound: ADMAIF1 <-> ADMAIF1 mapping ok
958[ 5.369324] tegra-asoc: sound: ADMAIF2 <-> ADMAIF2 mapping ok
959[ 5.369461] tegra-asoc: sound: ADMAIF3 <-> ADMAIF3 mapping ok
960[ 5.369593] tegra-asoc: sound: ADMAIF4 <-> ADMAIF4 mapping ok
961[ 5.369740] tegra-asoc: sound: ADMAIF5 <-> ADMAIF5 mapping ok
962[ 5.369873] tegra-asoc: sound: ADMAIF6 <-> ADMAIF6 mapping ok
963[ 5.370006] tegra-asoc: sound: ADMAIF7 <-> ADMAIF7 mapping ok
964[ 5.370138] tegra-asoc: sound: ADMAIF8 <-> ADMAIF8 mapping ok
965[ 5.370266] tegra-asoc: sound: ADMAIF9 <-> ADMAIF9 mapping ok
966[ 5.370400] tegra-asoc: sound: ADMAIF10 <-> ADMAIF10 mapping ok
967[ 5.372584] tegra-asoc: sound: ADSP-FE1 <-> ADSP PCM1 mapping ok
968[ 5.372717] tegra-asoc: sound: ADSP-FE2 <-> ADSP PCM2 mapping ok
969[ 5.372750] compress asoc: ADSP-FE3 <-> ADSP COMPR1 mapping ok
970[ 5.372782] compress asoc: ADSP-FE4 <-> ADSP COMPR2 mapping ok
971[ 5.378524] rt5640 0-001c: setup jack detect
972[ 5.378556] rt5640 0-001c: jack stuff
973[ 5.383744] tegra-pcie 1003000.pcie: link 0 down, retrying
974[ 5.385764] tegra-pcie 1003000.pcie: link 0 down, ignoring
975[ 5.404316] input: tegra-snd-t210ref-mobile-rt565x Headphone Jack as /devices/sound/sound/card1/input6
976[ 5.490043] tegra-pcie 1003000.pcie: PCI host bridge to bus 0000:00
977[ 5.490051] pci_bus 0000:00: root bus resource [io 0x0000-0xffff]
978[ 5.490055] pci_bus 0000:00: root bus resource [mem 0x13000000-0x1fffffff]
979[ 5.490058] pci_bus 0000:00: root bus resource [mem 0x20000000-0x3fffffff pref]
980[ 5.490062] pci_bus 0000:00: root bus resource [bus 00-ff]
981[ 5.490085] pci 0000:00:02.0: [10de:0faf] type 01 class 0x060400
982[ 5.490149] pci 0000:00:02.0: PME# supported from D0 D1 D2 D3hot D3cold
983[ 5.490297] pci 0000:00:02.0: bridge configuration invalid ([bus 00-00]), reconfiguring
984[ 5.490400] pci 0000:01:00.0: [14e4:43ec] type 00 class 0x028000
985[ 5.490433] pci 0000:01:00.0: reg 0x10: [mem 0x00000000-0x00007fff 64bit]
986[ 5.490453] pci 0000:01:00.0: reg 0x18: [mem 0x00000000-0x003fffff 64bit]
987[ 5.490624] pci 0000:01:00.0: supports D1 D2
988[ 5.490627] pci 0000:01:00.0: PME# supported from D0 D1 D2 D3hot D3cold
989[ 5.501847] pci_bus 0000:01: busn_res: [bus 01-ff] end is updated to 01
990[ 5.501878] pci 0000:00:02.0: BAR 14: assigned [mem 0x13000000-0x135fffff]
991[ 5.501884] pci 0000:01:00.0: BAR 2: assigned [mem 0x13000000-0x133fffff 64bit]
992[ 5.501902] pci 0000:01:00.0: BAR 0: assigned [mem 0x13400000-0x13407fff 64bit]
993[ 5.501920] pci 0000:00:02.0: PCI bridge to [bus 01]
994[ 5.501926] pci 0000:00:02.0: bridge window [mem 0x13000000-0x135fffff]
995[ 5.502120] pcieport 0000:00:02.0: enabling device (0000 -> 0002)
996[ 5.502230] pcieport 0000:00:02.0: Signaling PME through PCIe PME interrupt
997[ 5.502235] pci 0000:01:00.0: Signaling PME through PCIe PME interrupt
998[ 5.502240] pcie_pme 0000:00:02.0:pcie001: service driver pcie_pme loaded
999[ 5.502327] aer 0000:00:02.0:pcie002: service driver aer loaded
1000[ 5.513602] tegra-se 70012000.se: tegra_se_probe: complete
1001[ 5.591231] Silicon Labs C2 port support v. 0.51.0 - (C) 2007 Rodolfo Giometti
1002[ 5.608373] fts_touch 2-0049: fts_input_open
1003[ 5.608378] fts_touch 2-0049: fts_start_device exit low power mode
1004[ 5.608511] fts_touch 2-0049: FTS Command (93) , ret = 1
1005[ 5.608613] fts_touch 2-0049: FTS Command (A1) , ret = 1
1006[ 5.608623] fts_touch 2-0049: FTS cmd after wakeup : h0
1007[ 5.643448] FAN dev name: pwm-fan
1008[ 5.643485] FAN:gpio request success.
1009[ 5.643509] pwm_fan_driver pwm-fan: Found 2 profiles, default profile is tight
1010[ 5.643534] pwm_fan_driver pwm-fan: cap state:9, cap pwm:225
1011[ 5.643625] pwm_fan_driver pwm-fan: got pwm for fan. polarity is inversed
1012[ 5.643735] pwm_fan_driver pwm-fan: fan tach request irq success
1013[ 5.643741] pwm_fan_driver pwm-fan: tach period: 1000
1014[ 5.643790] pwm_fan_driver pwm-fan: index 0: pwm=0, rpm=0, rru=40, rrd=40, state:2
1015[ 5.643793] pwm_fan_driver pwm-fan: index 1: pwm=65, rpm=1000, rru=2, rrd=2, state:2
1016[ 5.643797] pwm_fan_driver pwm-fan: index 2: pwm=75, rpm=2000, rru=1, rrd=1, state:2
1017[ 5.643800] pwm_fan_driver pwm-fan: index 3: pwm=85, rpm=3000, rru=1, rrd=1, state:7
1018[ 5.643803] pwm_fan_driver pwm-fan: index 4: pwm=105, rpm=4000, rru=1, rrd=1, state:7
1019[ 5.643806] pwm_fan_driver pwm-fan: index 5: pwm=125, rpm=5000, rru=1, rrd=1, state:7
1020[ 5.643810] pwm_fan_driver pwm-fan: index 6: pwm=150, rpm=6000, rru=1, rrd=1, state:7
1021[ 5.643813] pwm_fan_driver pwm-fan: index 7: pwm=175, rpm=7000, rru=1, rrd=1, state:7
1022[ 5.643816] pwm_fan_driver pwm-fan: index 8: pwm=200, rpm=10000, rru=1, rrd=1, state:9
1023[ 5.643819] pwm_fan_driver pwm-fan: index 9: pwm=225, rpm=11000, rru=1, rrd=1, state:9
1024[ 5.662601] THERMAL EST: found 1 subdevs
1025[ 5.662606] THERMAL EST num_resources: 0
1026[ 5.662609] [THERMAL EST subdev 0]
1027[ 5.663356] thermal thermal_zone10: Registering thermal zone thermal_zone10 for type thermal-fan-est
1028[ 5.663359] THERMAL EST: thz register success.
1029[ 5.663385] THERMAL EST: end of probe, return err: 0
1030[ 5.861767] bm92t 0-0018: extcon cable is set to init state
1031[ 5.861775] bm92t 0-0018: extcon cable(1) attached
1032[ 5.861787] power-supply-extcon psy_extcon: USB charger cable detected
1033[ 5.861847] tegra-xudc-new 700d0000.xudc: vbus state: 1
1034[ 5.861859] tegra-xudc-new 700d0000.xudc: exiting ELPG
1035[ 5.862571] tegra-xudc-new 700d0000.xudc: exiting ELPG done
1036[ 5.862581] tegra-xudc-new 700d0000.xudc: device mode on: 0
1037[ 5.862590] tegra-xusb-padctl 7009f000.xusb_padctl: power on UTMI pads 0
1038[ 5.862622] tegra-xudc-new 700d0000.xudc: active: 0 => 1
1039[ 5.891519] audit_printk_skb: 138 callbacks suppressed
1040[ 5.891521] audit: type=1400 audit(1579553995.239:57): avc: granted { open } for pid=2957 comm="log" path="/dev/pmsg0" dev="tmpfs" ino=1347 scontext=u:r:init:s0 tcontext=u:object_r:pmsg_device:s0 tclass=chr_file
1041[ 5.907105] audit: type=1400 audit(1579553995.255:58): avc: granted { open } for pid=2958 comm="log" path="/dev/pmsg0" dev="tmpfs" ino=1347 scontext=u:r:init:s0 tcontext=u:object_r:pmsg_device:s0 tclass=chr_file
1042[ 5.961236] logd.auditd: start
1043[ 5.961251] logd.klogd: 5699536091
1044[ 6.036888] type=1400 audit(1579553995.383:59): avc: granted { open } for pid=2969 comm="vendor.nvidia.h" path="/dev/pmsg0" dev="tmpfs" ino=1347 scontext=u:r:init:s0 tcontext=u:object_r:pmsg_device:s0 tclass=chr_file
1045[ 6.071645] type=1400 audit(1579553995.383:59): avc: granted { open } for pid=2969 comm="vendor.nvidia.h" path="/dev/pmsg0" dev="tmpfs" ino=1347 scontext=u:r:init:s0 tcontext=u:object_r:pmsg_device:s0 tclass=chr_file
1046[ 6.071684] type=1400 audit(1579553995.419:60): avc: denied { call } for pid=2969 comm="inputflinger@2." scontext=u:r:init:s0 tcontext=u:r:hwservicemanager:s0 tclass=binder permissive=1
1047[ 6.071772] type=1400 audit(1579553995.419:60): avc: denied { call } for pid=2969 comm="inputflinger@2." scontext=u:r:init:s0 tcontext=u:r:hwservicemanager:s0 tclass=binder permissive=1
1048[ 6.071784] type=1400 audit(1579553995.419:61): avc: denied { transfer } for pid=2969 comm="inputflinger@2." scontext=u:r:init:s0 tcontext=u:r:hwservicemanager:s0 tclass=binder permissive=1
1049[ 6.082804] type=1400 audit(1579553995.419:61): avc: denied { transfer } for pid=2969 comm="inputflinger@2." scontext=u:r:init:s0 tcontext=u:r:hwservicemanager:s0 tclass=binder permissive=1
1050[ 6.082823] type=1400 audit(1579553995.431:62): avc: denied { call } for pid=2961 comm="hwservicemanage" scontext=u:r:hwservicemanager:s0 tcontext=u:r:init:s0 tclass=binder permissive=1
1051[ 6.105963] vdc: Waited 20ms for vold
1052[ 6.162414] type=1400 audit(1579553995.431:62): avc: denied { call } for pid=2961 comm="hwservicemanage" scontext=u:r:hwservicemanager:s0 tcontext=u:r:init:s0 tclass=binder permissive=1
1053[ 6.344142] audit: audit_lost=47 audit_rate_limit=5 audit_backlog_limit=64
1054[ 6.344161] audit: rate limit exceeded
1055[ 6.346130] using random self ethernet address
1056[ 6.346148] using random host ethernet address
1057[ 6.346330] file system registered
1058[ 6.354469] using random self ethernet address
1059[ 6.354498] using random host ethernet address
1060[ 6.355479] using random self ethernet address
1061[ 6.355506] using random host ethernet address
1062[ 6.790350] FAN rising trip_level:1 cur_temp:32000 trip_temps[2]:35000
1063[ 7.300543] do_smc: overriding result_origin field
1064[ 7.344443] random: crng init done
1065[ 7.344450] random: 7 urandom warning(s) missed due to ratelimiting
1066[ 7.352217] audit: audit_lost=75 audit_rate_limit=5 audit_backlog_limit=64
1067[ 7.352236] audit: rate limit exceeded
1068[ 7.779764] tegra-xusb 70090000.xusb: Upgrade port 0 to USB3.0
1069[ 7.779772] tegra-xusb 70090000.xusb: Upgrade port 1 to USB3.0
1070[ 7.831408] usbcore: registered new interface driver usb-storage
1071[ 7.869828] usbcore: registered new interface driver cdc_acm
1072[ 7.869831] cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters
1073[ 7.873951] usb usb2: usb_suspend_both: status 0
1074[ 7.955047] ozwpan: module is from the staging directory, the quality is unknown, you have been warned.
1075[ 7.960387] ozwpan ozwpan: Ozmo Devices WPAN
1076[ 7.960395] ozwpan ozwpan: new USB bus registered, assigned bus number 3
1077[ 7.961905] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
1078[ 7.961911] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
1079[ 7.961914] usb usb3: Product: Ozmo Devices WPAN
1080[ 7.961917] usb usb3: Manufacturer: Linux 4.9.140-gb4a62f0eb099 Ozmo WPAN
1081[ 7.961921] usb usb3: SerialNumber: ozwpan
1082[ 7.963650] hub 3-0:1.0: USB hub found
1083[ 7.963744] hub 3-0:1.0: 4 ports detected
1084[ 7.964039] p->oz_protocol_init = 0xffffff8001745d60
1085[ 8.065849] usb usb3: usb_suspend_both: status 0
1086[ 8.307706] do_smc: overriding result_origin field
1087[ 8.308217] do_smc: overriding result_origin field
1088[ 8.308233] te_close_session: error closing session: 0xffffffff
1089[ 8.308235] te_close_session: session_id not found: 0x0
1090[ 8.310467] read descriptors
1091[ 8.310476] read strings
1092[ 8.317003] tegra-xudc-new 700d0000.xudc: ep 0 (type: 0, dir: out) enabled
1093[ 8.465857] audit: audit_lost=148 audit_rate_limit=5 audit_backlog_limit=64
1094[ 8.465875] audit: rate limit exceeded
1095[ 8.523995] init: Service 'vendor.nvphsd_setup' (pid 3033) exited with status 1
1096[ 8.524530] init: processing action (init.svc.vendor.nvphsd_setup=*) from (/vendor/etc/init/hw/init.nvphsd_setup.rc:53)
1097[ 8.532659] android_work: did not send uevent (0 0 (null))
1098[ 8.569293] android_work: sent uevent USB_STATE=CONNECTED
1099[ 8.603314] configfs-gadget gadget: high-speed config #1: b
1100[ 8.603343] tegra-xudc-new 700d0000.xudc: ep 2 (type: 2, dir: out) enabled
1101[ 8.603364] tegra-xudc-new 700d0000.xudc: ep 3 (type: 2, dir: in) enabled
1102[ 8.603463] android_work: sent uevent USB_STATE=CONFIGURED
1103[ 8.792533] init: Service 'vendor.lkm_loader' (pid 3166) exited with status 0
1104[ 8.792919] init: processing action (init.svc.vendor.lkm_loader=stopped) from (/vendor/etc/init/hw/init.tegra.rc:110)
1105[ 8.794602] init: processing action (init.svc.vendor.lkm_loader=stopped) from (/vendor/etc/init/hw/init.comms.rc:33)
1106[ 8.795179] init: File /vendor/bin/wifi_loader.sh(labeled "u:object_r:vendor_file:s0") has incorrect label or no domain transition from u:r:init:s0 to another SELinux domain defined. Have you configured your service correctly? https://source.android.com/security/selinux/device-policy#label_new_services_and_address_denials
1107[ 8.795246] init: starting service 'vendor.wifiloader'...
1108[ 8.802190] init: processing action (init.svc.vendor.lkm_loader=stopped) from (/vendor/etc/init/hw/init.loki_foster_e_common.rc:60)
1109[ 9.300331] edid invalid
1110[ 9.300378] edid invalid
1111[ 9.300421] tegra_edid_get_ex_dv_cap_info: edid invalid
1112[ 9.301149] do_smc: overriding result_origin field
1113[ 9.499935] audit: audit_lost=196 audit_rate_limit=5 audit_backlog_limit=64
1114[ 9.499981] audit: rate limit exceeded
1115[ 9.778154] init: wait for '/sys/devices/57000000.gpu/devfreq/57000000.gpu/available_frequencies' took 975ms
1116[ 9.778250] init: Command 'wait /sys/devices/57000000.gpu/devfreq/57000000.gpu/available_frequencies 10' action=init.svc.vendor.lkm_loader=stopped (/vendor/etc/init/hw/init.loki_foster_e_common.rc:63) took 975ms and succeeded
1117[ 9.779074] init: Service 'vendor.wifiloader' (pid 3334) exited with status 255
1118[ 10.213753] tegra-xusb 70090000.xusb: entering ELPG
1119[ 10.214247] tegra-xusb 70090000.xusb: entering ELPG done
1120[ 10.253601] tegradc tegradc.0: unblank
1121[ 11.739852] capability: warning: `main' uses 32-bit capabilities (legacy support in use)
1122[ 12.002511] type=1400 audit(1579554000.019:255): avc: denied { call } for pid=3366 comm="BootAnimation" scontext=u:r:bootanim:s0 tcontext=u:r:init:s0 tclass=binder permissive=1
1123[ 12.002539] type=1400 audit(1579554001.351:267): avc: denied { use } for pid=3078 comm="surfaceflinger" path="/dev/ashmem" dev="tmpfs" ino=14196 scontext=u:r:init:s0 tcontext=u:r:surfaceflinger:s0 tclass=fd permissive=1
1124[ 12.027426] type=1400 audit(1579554001.351:267): avc: denied { use } for pid=3078 comm="surfaceflinger" path="/dev/ashmem" dev="tmpfs" ino=14196 scontext=u:r:init:s0 tcontext=u:r:surfaceflinger:s0 tclass=fd permissive=1
1125[ 12.027471] type=1400 audit(1579554001.375:268): avc: denied { call } for pid=3069 comm="composer@2.0-se" scontext=u:r:init:s0 tcontext=u:r:hwservicemanager:s0 tclass=binder permissive=1
1126[ 12.028466] type=1400 audit(1579554001.375:268): avc: denied { call } for pid=3069 comm="composer@2.0-se" scontext=u:r:init:s0 tcontext=u:r:hwservicemanager:s0 tclass=binder permissive=1
1127[ 12.028487] type=1400 audit(1579554001.375:269): avc: denied { call } for pid=3069 comm="composer@2.0-se" scontext=u:r:init:s0 tcontext=u:r:init:s0 tclass=binder permissive=1
1128[ 12.143197] type=1400 audit(1579554001.375:269): avc: denied { call } for pid=3069 comm="composer@2.0-se" scontext=u:r:init:s0 tcontext=u:r:init:s0 tclass=binder permissive=1
1129[ 12.143219] type=1400 audit(1579554001.491:270): avc: denied { read } for pid=3069 comm="composer@2.0-se" name="tegra_chip_id" dev="sysfs" ino=11843 scontext=u:r:init:s0 tcontext=u:object_r:sysfs:s0 tclass=file permissive=1
1130[ 12.143248] audit_log_lost: 2 callbacks suppressed
1131[ 12.143251] audit: audit_lost=226 audit_rate_limit=5 audit_backlog_limit=64
1132[ 12.143278] audit: rate limit exceeded
1133[ 12.143310] type=1400 audit(1579554001.491:270): avc: denied { read } for pid=3069 comm="composer@2.0-se" name="tegra_chip_id" dev="sysfs" ino=11843 scontext=u:r:init:s0 tcontext=u:object_r:sysfs:s0 tclass=file permissive=1
1134[ 12.143325] type=1400 audit(1579554001.491:271): avc: denied { open } for pid=3069 comm="composer@2.0-se" path="/sys/module/tegra_fuse/parameters/tegra_chip_id" dev="sysfs" ino=11843 scontext=u:r:init:s0 tcontext=u:object_r:sysfs:s0 tclass=file permissive=1
1135[ 13.326416] do_smc: overriding result_origin field
1136[ 13.704483] audit: audit_lost=237 audit_rate_limit=5 audit_backlog_limit=64
1137[ 13.704502] audit: rate limit exceeded
1138[ 14.757824] init: processing action (sys.sysctl.extra_free_kbytes=*) from (/init.rc:720)
1139[ 14.764710] audit: audit_lost=246 audit_rate_limit=5 audit_backlog_limit=64
1140[ 14.764730] audit: rate limit exceeded
1141[ 15.395167] binder: 2960:2960 BC_REQUEST_DEATH_NOTIFICATION death notification already set
1142[ 15.483693] acc_open
1143[ 15.483705] acc_release
1144[ 15.554618] tegra_cec 70015000.tegra_cec: set logical address: 0x0
1145[ 15.554763] tegra_cec 70015000.tegra_cec: set logical address: 0x0
1146[ 16.398342] audit: audit_lost=270 audit_rate_limit=5 audit_backlog_limit=64
1147[ 16.398361] audit: rate limit exceeded
1148[ 16.518175] usb usb3: usb_suspend_both: status 0
1149[ 16.518259] tegra-xusb 70090000.xusb: exiting ELPG
1150[ 16.540837] tegra-xusb 70090000.xusb: Firmware timestamp: 2019-05-08 09:42:10 UTC, Version: 50.22 release
1151[ 16.541127] tegra-pmc: PMC tegra_pmc_utmi_phy_disable_sleepwalk : port 0
1152[ 16.541515] tegra-xusb 70090000.xusb: exiting ELPG done
1153[ 16.543223] usb usb2: usb_suspend_both: status 0
1154[ 16.548782] usb usb1: usb_suspend_both: status 0
1155[ 16.561751] sdcardfs version 2.0
1156[ 16.561756] sdcardfs: dev_name -> /data/media
1157[ 16.561759] sdcardfs: options -> fsuid=1023,fsgid=1023,multiuser,derive_gid,default_normal,mask=6,userid=0,gid=1015
1158[ 16.561762] sdcardfs: mnt -> ffffffc0fae6f520
1159[ 16.561803] sdcardfs: mounted on top of /data/media type ext4
1160[ 16.566697] Remount options were mask=23,gid=9997 for vfsmnt ffffffc0a4034720.
1161[ 16.566706] sdcardfs : options - debug:1
1162[ 16.566709] sdcardfs : options - gid:9997
1163[ 16.566711] sdcardfs : options - mask:23
1164[ 16.568318] Remount options were mask=7,gid=9997 for vfsmnt ffffffc0a4035360.
1165[ 16.568326] sdcardfs : options - debug:1
1166[ 16.568328] sdcardfs : options - gid:9997
1167[ 16.568330] sdcardfs : options - mask:7
1168[ 16.709098] init: Received control message 'start' for 'wpa_supplicant' from pid: 3188 (/system/bin/wificond)
1169[ 16.709478] init: starting service 'wpa_supplicant'...
1170[ 16.713038] init: Created socket '/dev/socket/wpa_wlan0', mode 660, user 1010, group 1010
1171[ 17.519216] audit: audit_lost=282 audit_rate_limit=5 audit_backlog_limit=64
1172[ 17.519245] audit: rate limit exceeded
1173[ 17.925030] type=1400 audit(1579554006.063:339): avc: denied { ioctl } for pid=3069 comm="composer@2.0-se" path="/dev/tegra_dc_0" dev="tmpfs" ino=14233 ioctlcmd=0x441d scontext=u:r:init:s0 tcontext=u:object_r:video_device:s0 tclass=chr_file permissive=1
1174[ 17.925054] type=1400 audit(1579554007.271:350): avc: denied { call } for pid=3520 comm="ieldtech.system" scontext=u:r:system_app:s0 tcontext=u:r:init:s0 tclass=binder permissive=1
1175[ 17.929779] type=1400 audit(1579554007.271:350): avc: denied { call } for pid=3520 comm="ieldtech.system" scontext=u:r:system_app:s0 tcontext=u:r:init:s0 tclass=binder permissive=1
1176[ 17.929799] type=1400 audit(1579554007.275:351): avc: denied { call } for pid=3069 comm="hwc_eventmon" scontext=u:r:init:s0 tcontext=u:r:surfaceflinger:s0 tclass=binder permissive=1
1177[ 17.930575] type=1400 audit(1579554007.275:351): avc: denied { call } for pid=3069 comm="hwc_eventmon" scontext=u:r:init:s0 tcontext=u:r:surfaceflinger:s0 tclass=binder permissive=1
1178[ 17.930598] type=1400 audit(1579554007.279:352): avc: denied { call } for pid=3078 comm="surfaceflinger" scontext=u:r:surfaceflinger:s0 tcontext=u:r:init:s0 tclass=binder permissive=1
1179[ 17.931015] type=1400 audit(1579554007.279:352): avc: denied { call } for pid=3078 comm="surfaceflinger" scontext=u:r:surfaceflinger:s0 tcontext=u:r:init:s0 tclass=binder permissive=1
1180[ 17.931047] type=1400 audit(1579554007.279:353): avc: denied { ioctl } for pid=3078 comm="surfaceflinger" path="/dev/nvmap" dev="tmpfs" ino=14188 ioctlcmd=0x4e04 scontext=u:r:surfaceflinger:s0 tcontext=u:object_r:device:s0 tclass=chr_file permissive=1
1181[ 18.000953] tegra_cec 70015000.tegra_cec: set logical address: 0x10
1182[ 18.000989] type=1400 audit(1579554007.279:353): avc: denied { ioctl } for pid=3078 comm="surfaceflinger" path="/dev/nvmap" dev="tmpfs" ino=14188 ioctlcmd=0x4e04 scontext=u:r:surfaceflinger:s0 tcontext=u:object_r:device:s0 tclass=chr_file permissive=1
1183[ 18.001008] type=1400 audit(1579554007.347:354): avc: denied { read write } for pid=3063 comm="cec@1.0-service" name="cec_logical_addr_config" dev="sysfs" ino=23067 scontext=u:r:hal_tv_cec_default:s0 tcontext=u:object_r:sysfs:s0 tclass=file permissive=1
1184[ 18.566459] audit: audit_lost=305 audit_rate_limit=5 audit_backlog_limit=64
1185[ 18.566478] audit: rate limit exceeded
1186[ 19.173775] tegra-xusb 70090000.xusb: entering ELPG
1187[ 19.174265] tegra-xusb 70090000.xusb: entering ELPG done
1188[ 27.066991] init: Service 'bootanim' (pid 3366) exited with status 0
1189[ 27.241145] init: processing action (sys.boot_completed=1) from (/init.rc:714)
1190[ 27.241186] init: processing action (sys.boot_completed=1) from (/vendor/etc/init/hw/init.t210_common.rc:85)
1191[ 27.242065] init: processing action (sys.boot_completed=1 && sys.logbootcomplete=1) from (/system/etc/init/bootstat.rc:70)
1192[ 27.242474] init: starting service 'exec 5 (/system/bin/bootstat --set_system_boot_reason --record_boot_complete --record_boot_reason --record_time_since_factory_reset -l)'...
1193[ 27.244500] init: processing action (sys.boot_completed=1 && sys.wifitracing.started=0) from (/system/etc/init/wifi-events.rc:20)
1194[ 27.290652] selinux: SELinux: Skipping restorecon_recursive(/data/system_ce/0)
1195[ 27.290652]
1196[ 27.306253] init: Async property child exited with status 0
1197[ 27.308916] selinux: SELinux: Skipping restorecon_recursive(/data/misc_ce/0)
1198[ 27.308916]
1199[ 27.309473] init: Async property child exited with status 0
1200[ 27.334067] type=1400 audit(1579554011.595:408): avc: denied { call } for pid=3384 comm="InputReader" scontext=u:r:system_server:s0 tcontext=u:r:init:s0 tclass=binder permissive=1
1201[ 27.334089] type=1400 audit(1579554016.683:409): avc: denied { execute } for pid=3939 comm="init" name="nvphsd" dev="mmcblk0p3" ino=146 scontext=u:r:init:s0 tcontext=u:object_r:vendor_file:s0 tclass=file permissive=1
1202[ 27.334473] type=1400 audit(1579554016.683:409): avc: denied { execute } for pid=3939 comm="init" name="nvphsd" dev="mmcblk0p3" ino=146 scontext=u:r:init:s0 tcontext=u:object_r:vendor_file:s0 tclass=file permissive=1
1203[ 27.334488] type=1400 audit(1579554016.683:410): avc: denied { execute_no_trans } for pid=3939 comm="init" path="/vendor/bin/nvphsd" dev="mmcblk0p3" ino=146 scontext=u:r:init:s0 tcontext=u:object_r:vendor_file:s0 tclass=file permissive=1
1204[ 27.353316] logd: logdr: UID=1000 GID=1007 PID=3920 n tail=0 logMask=80 pid=0 start=0ns timeout=0ns
1205[ 27.418811] type=1400 audit(1579554016.683:410): avc: denied { execute_no_trans } for pid=3939 comm="init" path="/vendor/bin/nvphsd" dev="mmcblk0p3" ino=146 scontext=u:r:init:s0 tcontext=u:object_r:vendor_file:s0 tclass=file permissive=1
1206[ 27.418832] type=1400 audit(1579554016.767:411): avc: denied { execute } for pid=3939 comm="nvphsd" path="/vendor/lib64/vendor.nvidia.hardware.phs@1.0.so" dev="mmcblk0p3" ino=1080 scontext=u:r:init:s0 tcontext=u:object_r:vendor_file:s0 tclass=file permissive=1
1207[ 27.424974] type=1400 audit(1579554016.767:411): avc: denied { execute } for pid=3939 comm="nvphsd" path="/vendor/lib64/vendor.nvidia.hardware.phs@1.0.so" dev="mmcblk0p3" ino=1080 scontext=u:r:init:s0 tcontext=u:object_r:vendor_file:s0 tclass=file permissive=1
1208[ 27.424998] type=1400 audit(1579554016.771:412): avc: denied { ioctl } for pid=3577 comm="RenderThread" path="/dev/nvmap" dev="tmpfs" ino=14188 ioctlcmd=0x4e04 scontext=u:r:platform_app:s0:c512,c768 tcontext=u:object_r:device:s0 tclass=chr_file permissive=1
1209[ 27.430863] type=1400 audit(1579554016.771:412): avc: denied { ioctl } for pid=3577 comm="RenderThread" path="/dev/nvmap" dev="tmpfs" ino=14188 ioctlcmd=0x4e04 scontext=u:r:platform_app:s0:c512,c768 tcontext=u:object_r:device:s0 tclass=chr_file permissive=1
1210[ 27.431202] audit: audit_lost=328 audit_rate_limit=5 audit_backlog_limit=64
1211[ 27.431220] audit: rate limit exceeded
1212[ 28.480611] audit: audit_lost=365 audit_rate_limit=5 audit_backlog_limit=64
1213[ 28.480630] audit: rate limit exceeded
1214[ 29.590550] rt5640 0-001c: Sysclk is 12288000Hz and clock id is 0
1215[ 29.607079] rt5640 0-001c: bclk is 1536000Hz and lrck is 48000Hz
1216[ 29.607085] rt5640 0-001c: bclk_ms is 0 and pre_div is 0 for iis 0
1217[ 31.632710] audit: audit_lost=419 audit_rate_limit=5 audit_backlog_limit=64
1218[ 31.632728] audit: rate limit exceeded
1219[ 32.763359] type=1400 audit(1579554020.979:519): avc: denied { read } for pid=3952 comm="Thread-3" name="Thunderstrike_locale.blkz" dev="mmcblk0p3" ino=1108 scontext=u:r:platform_app:s0:c512,c768 tcontext=u:object_r:vendor_file:s0 tclass=file permissive=1
1220[ 32.763381] type=1400 audit(1579554022.115:521): avc: denied { call } for pid=3384 comm="InputReader" scontext=u:r:system_server:s0 tcontext=u:r:init:s0 tclass=binder permissive=1
1221[ 32.764134] type=1400 audit(1579554022.115:521): avc: denied { call } for pid=3384 comm="InputReader" scontext=u:r:system_server:s0 tcontext=u:r:init:s0 tclass=binder permissive=1
1222[ 32.764156] type=1400 audit(1579554022.115:522): avc: denied { call } for pid=3078 comm="Binder:3078_3" scontext=u:r:surfaceflinger:s0 tcontext=u:r:init:s0 tclass=binder permissive=1
1223[ 32.764444] type=1400 audit(1579554022.115:522): avc: denied { call } for pid=3078 comm="Binder:3078_3" scontext=u:r:surfaceflinger:s0 tcontext=u:r:init:s0 tclass=binder permissive=1
1224[ 32.764467] type=1400 audit(1579554022.115:523): avc: denied { ioctl } for pid=3069 comm="composer@2.0-se" path="/dev/tegra_dc_0" dev="tmpfs" ino=14233 ioctlcmd=0x4415 scontext=u:r:init:s0 tcontext=u:object_r:video_device:s0 tclass=chr_file permissive=1
1225[ 32.780022] type=1400 audit(1579554022.115:523): avc: denied { ioctl } for pid=3069 comm="composer@2.0-se" path="/dev/tegra_dc_0" dev="tmpfs" ino=14233 ioctlcmd=0x4415 scontext=u:r:init:s0 tcontext=u:object_r:video_device:s0 tclass=chr_file permissive=1
1226[ 32.780048] type=1400 audit(1579554022.127:524): avc: denied { call } for pid=3069 comm="hwc_eventmon" scontext=u:r:init:s0 tcontext=u:r:surfaceflinger:s0 tclass=binder permissive=1
1227[ 32.813199] audit: audit_lost=420 audit_rate_limit=5 audit_backlog_limit=64
1228[ 32.813218] audit: rate limit exceeded
1229[ 34.777423] type=1400 audit(1579554022.143:525): avc: denied { call } for pid=3069 comm="hwc_eventmon" scontext=u:r:init:s0 tcontext=u:r:surfaceflinger:s0 tclass=binder permissive=1
1230[ 34.777446] type=1400 audit(1579554024.123:531): avc: denied { ioctl } for pid=3384 comm="FinalizerDaemon" path="/dev/nvmap" dev="tmpfs" ino=14188 ioctlcmd=0x4e04 scontext=u:r:system_server:s0 tcontext=u:object_r:device:s0 tclass=chr_file permissive=1
1231[ 41.272428] type=1400 audit(1579554025.411:534): avc: denied { open } for pid=4596 comm="grep" path="/sys/devices/virtual/switch/hdmi/state" dev="sysfs" ino=29421 scontext=u:r:init:s0 tcontext=u:object_r:sysfs_switch:s0 tclass=file permissive=1
1232[ 41.272451] type=1400 audit(1579554030.619:535): avc: denied { call } for pid=3384 comm="InputReader" scontext=u:r:system_server:s0 tcontext=u:r:init:s0 tclass=binder permissive=1
1233[ 49.202978] type=1400 audit(1579554030.619:535): avc: denied { call } for pid=3384 comm="InputReader" scontext=u:r:system_server:s0 tcontext=u:r:init:s0 tclass=binder permissive=1
1234[ 49.203001] type=1400 audit(1579554038.551:536): avc: denied { ioctl } for pid=3069 comm="composer@2.0-se" path="/dev/tegra_dc_0" dev="tmpfs" ino=14233 ioctlcmd=0x4415 scontext=u:r:init:s0 tcontext=u:object_r:video_device:s0 tclass=chr_file permissive=1
1235[ 49.230301] type=1400 audit(1579554038.551:536): avc: denied { ioctl } for pid=3069 comm="composer@2.0-se" path="/dev/tegra_dc_0" dev="tmpfs" ino=14233 ioctlcmd=0x4415 scontext=u:r:init:s0 tcontext=u:object_r:video_device:s0 tclass=chr_file permissive=1
1236[ 49.230327] type=1400 audit(1579554038.579:537): avc: denied { ioctl } for pid=3577 comm="RenderThread" path="/dev/nvmap" dev="tmpfs" ino=14188 ioctlcmd=0x4e04 scontext=u:r:platform_app:s0:c512,c768 tcontext=u:object_r:device:s0 tclass=chr_file permissive=1
1237[ 59.193587] type=1400 audit(1579554038.579:537): avc: denied { ioctl } for pid=3577 comm="RenderThread" path="/dev/nvmap" dev="tmpfs" ino=14188 ioctlcmd=0x4e04 scontext=u:r:platform_app:s0:c512,c768 tcontext=u:object_r:device:s0 tclass=chr_file permissive=1
1238[ 59.193607] type=1400 audit(1579554048.539:538): avc: denied { read } for pid=3058 comm="memtrack@1.0-se" name="4080" dev="debugfs" ino=36891 scontext=u:r:hal_memtrack_default:s0 tcontext=u:object_r:debugfs:s0 tclass=file permissive=1
1239[ 59.193796] type=1400 audit(1579554048.539:538): avc: denied { read } for pid=3058 comm="memtrack@1.0-se" name="4080" dev="debugfs" ino=36891 scontext=u:r:hal_memtrack_default:s0 tcontext=u:object_r:debugfs:s0 tclass=file permissive=1
1240[ 59.193810] type=1400 audit(1579554048.539:539): avc: denied { open } for pid=3058 comm="memtrack@1.0-se" path="/sys/kernel/debug/nvmap/handles_by_pid/4080" dev="debugfs" ino=36891 scontext=u:r:hal_memtrack_default:s0 tcontext=u:object_r:debugfs:s0 tclass=file permissive=1
1241[ 59.766929] type=1400 audit(1579554048.539:539): avc: denied { open } for pid=3058 comm="memtrack@1.0-se" path="/sys/kernel/debug/nvmap/handles_by_pid/4080" dev="debugfs" ino=36891 scontext=u:r:hal_memtrack_default:s0 tcontext=u:object_r:debugfs:s0 tclass=file permissive=1
1242[ 59.766953] type=1400 audit(1579554049.115:540): avc: denied { execute_no_trans } for pid=4644 comm="dock_service.sh" path="/system/bin/grep" dev="mmcblk0p4" ino=300 scontext=u:r:init:s0 tcontext=u:object_r:system_file:s0 tclass=file permissive=1
1243[ 67.194425] type=1400 audit(1579554049.115:540): avc: denied { execute_no_trans } for pid=4644 comm="dock_service.sh" path="/system/bin/grep" dev="mmcblk0p4" ino=300 scontext=u:r:init:s0 tcontext=u:object_r:system_file:s0 tclass=file permissive=1
1244[ 67.194452] type=1400 audit(1579554056.543:541): avc: denied { read } for pid=3044 comm="healthd" name="present" dev="sysfs" ino=17356 scontext=u:r:healthd:s0 tcontext=u:object_r:sysfs:s0 tclass=file permissive=1
1245[ 67.194572] type=1400 audit(1579554056.543:541): avc: denied { read } for pid=3044 comm="healthd" name="present" dev="sysfs" ino=17356 scontext=u:r:healthd:s0 tcontext=u:object_r:sysfs:s0 tclass=file permissive=1
1246[ 67.194593] type=1400 audit(1579554056.543:542): avc: denied { open } for pid=3044 comm="healthd" path="/sys/devices/7000c000.i2c/i2c-0/0-0036/power_supply/max170xx_battery/present" dev="sysfs" ino=17356 scontext=u:r:healthd:s0 tcontext=u:object_r:sysfs:s0 tclass=file permissive=1
1247[ 67.194676] type=1400 audit(1579554056.543:542): avc: denied { open } for pid=3044 comm="healthd" path="/sys/devices/7000c000.i2c/i2c-0/0-0036/power_supply/max170xx_battery/present" dev="sysfs" ino=17356 scontext=u:r:healthd:s0 tcontext=u:object_r:sysfs:s0 tclass=file permissive=1
1248[ 67.194694] type=1400 audit(1579554056.543:543): avc: denied { getattr } for pid=3044 comm="healthd" path="/sys/devices/7000c000.i2c/i2c-0/0-0036/power_supply/max170xx_battery/present" dev="sysfs" ino=17356 scontext=u:r:healthd:s0 tcontext=u:object_r:sysfs:s0 tclass=file permissive=1
1249[ 67.573025] audit: audit_lost=425 audit_rate_limit=5 audit_backlog_limit=64
1250[ 67.573049] audit: rate limit exceeded
1251[ 67.573057] type=1400 audit(1579554056.543:543): avc: denied { getattr } for pid=3044 comm="healthd" path="/sys/devices/7000c000.i2c/i2c-0/0-0036/power_supply/max170xx_battery/present" dev="sysfs" ino=17356 scontext=u:r:healthd:s0 tcontext=u:object_r:sysfs:s0 tclass=file permissive=1
1252[ 67.573080] type=1400 audit(1579554056.919:544): avc: denied { read } for pid=3055 comm="health@2.0-serv" name="present" dev="sysfs" ino=17356 scontext=u:r:hal_health_default:s0 tcontext=u:object_r:sysfs:s0 tclass=file permissive=1
1253[ 67.573288] type=1400 audit(1579554056.919:544): avc: denied { read } for pid=3055 comm="health@2.0-serv" name="present" dev="sysfs" ino=17356 scontext=u:r:hal_health_default:s0 tcontext=u:object_r:sysfs:s0 tclass=file permissive=1
1254[ 67.573309] type=1400 audit(1579554056.919:545): avc: denied { open } for pid=3055 comm="health@2.0-serv" path="/sys/devices/7000c000.i2c/i2c-0/0-0036/power_supply/max170xx_battery/present" dev="sysfs" ino=17356 scontext=u:r:hal_health_default:s0 tcontext=u:object_r:sysfs:s0 tclass=file permissive=1
1255[ 103.830425] type=1400 audit(1579554056.919:545): avc: denied { open } for pid=3055 comm="health@2.0-serv" path="/sys/devices/7000c000.i2c/i2c-0/0-0036/power_supply/max170xx_battery/present" dev="sysfs" ino=17356 scontext=u:r:hal_health_default:s0 tcontext=u:object_r:sysfs:s0 tclass=file permissive=1
1256[ 103.830456] type=1400 audit(1579554093.179:548): avc: denied { read } for pid=3065 comm="joycond" scontext=u:r:init:s0 tcontext=u:r:init:s0 tclass=netlink_kobject_uevent_socket permissive=1
1257[ 110.822728] type=1400 audit(1579554093.179:548): avc: denied { read } for pid=3065 comm="joycond" scontext=u:r:init:s0 tcontext=u:r:init:s0 tclass=netlink_kobject_uevent_socket permissive=1
1258[ 110.822751] type=1400 audit(1579554100.171:549): avc: denied { ioctl } for pid=3054 comm="allocator@2.0-s" path="/dev/nvmap" dev="tmpfs" ino=14188 ioctlcmd=0x4e00 scontext=u:r:hal_graphics_allocator_default:s0 tcontext=u:object_r:device:s0 tclass=chr_file permissive=1
1259[ 110.823810] type=1400 audit(1579554100.171:549): avc: denied { ioctl } for pid=3054 comm="allocator@2.0-s" path="/dev/nvmap" dev="tmpfs" ino=14188 ioctlcmd=0x4e00 scontext=u:r:hal_graphics_allocator_default:s0 tcontext=u:object_r:device:s0 tclass=chr_file permissive=1
1260[ 110.823835] type=1400 audit(1579554100.171:550): avc: denied { ioctl } for pid=3384 comm="PowerManagerSer" path="/dev/nvmap" dev="tmpfs" ino=14188 ioctlcmd=0x4e10 scontext=u:r:system_server:s0 tcontext=u:object_r:device:s0 tclass=chr_file permissive=1
1261[ 110.824572] type=1400 audit(1579554100.171:550): avc: denied { ioctl } for pid=3384 comm="PowerManagerSer" path="/dev/nvmap" dev="tmpfs" ino=14188 ioctlcmd=0x4e10 scontext=u:r:system_server:s0 tcontext=u:object_r:device:s0 tclass=chr_file permissive=1
1262[ 110.824591] type=1400 audit(1579554100.171:551): avc: denied { use } for pid=3078 comm="surfaceflinger" path="anon_inode:sync_fence" dev="anon_inodefs" ino=9446 scontext=u:r:init:s0 tcontext=u:r:surfaceflinger:s0 tclass=fd permissive=1
1263[ 110.826809] type=1400 audit(1579554100.171:551): avc: denied { use } for pid=3078 comm="surfaceflinger" path="anon_inode:sync_fence" dev="anon_inodefs" ino=9446 scontext=u:r:init:s0 tcontext=u:r:surfaceflinger:s0 tclass=fd permissive=1
1264[ 110.826838] type=1400 audit(1579554100.175:552): avc: denied { read write } for pid=3384 comm="PowerManagerSer" name="nvhost-ctrl-gpu" dev="tmpfs" ino=14301 scontext=u:r:system_server:s0 tcontext=u:object_r:device:s0 tclass=chr_file permissive=1
1265[ 110.826957] type=1400 audit(1579554100.175:552): avc: denied { read write } for pid=3384 comm="PowerManagerSer" name="nvhost-ctrl-gpu" dev="tmpfs" ino=14301 scontext=u:r:system_server:s0 tcontext=u:object_r:device:s0 tclass=chr_file permissive=1
1266[ 110.826978] type=1400 audit(1579554100.175:553): avc: denied { open } for pid=3384 comm="PowerManagerSer" path="/dev/nvhost-ctrl-gpu" dev="tmpfs" ino=14301 scontext=u:r:system_server:s0 tcontext=u:object_r:device:s0 tclass=chr_file permissive=1
1267[ 111.417901] tegradc tegradc.0: blank - powerdown
1268[ 111.626472] audit: audit_lost=427 audit_rate_limit=5 audit_backlog_limit=64
1269[ 111.626491] audit: rate limit exceeded