· 6 years ago · Dec 11, 2019, 04:30 PM
1[root@ddrx0160 ~]# dmesg
2[ 0.000000] Linux version 4.19.67-4.el7.x86_64 (root@dev7) (gcc version 4.8.5 20150623 (Red Hat 4.8.5-36) (GCC)) #1 SMP Fri Aug 23 11:25:56 MSK 2019
3[ 0.000000] Command line: BOOT_IMAGE=/vmlinuz-4.19.67-4.el7.x86_64 root=UUID=4b938ad0-5d9b-4482-8c8a-a70c132a51fe ro usbcore.autosuspend=-1 bootdegraded=true crashkernel=auto net.ifnames=0 biosdevname=0 rd.md.uuid=944c326c:ccd5c2c2:c08cad52:e8beecef rd.md.uuid=be9174fe:18e8f7ff:c08cad52:e8beecef rd.md.uuid=7d8d5db8:4e10d958:c08cad52:e8beecef LANG=en_US.UTF-8
4[ 0.000000] x86/fpu: x87 FPU will use FXSAVE
5[ 0.000000] BIOS-provided physical RAM map:
6[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009dfff] usable
7[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000cf378fff] usable
8[ 0.000000] BIOS-e820: [mem 0x00000000cf379000-0x00000000cf38efff] reserved
9[ 0.000000] BIOS-e820: [mem 0x00000000cf38f000-0x00000000cf3cdfff] ACPI data
10[ 0.000000] BIOS-e820: [mem 0x00000000cf3ce000-0x00000000cfffffff] reserved
11[ 0.000000] BIOS-e820: [mem 0x00000000e0000000-0x00000000efffffff] reserved
12[ 0.000000] BIOS-e820: [mem 0x00000000fe000000-0x00000000ffffffff] reserved
13[ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000012fffffff] usable
14[ 0.000000] NX (Execute Disable) protection: active
15[ 0.000000] SMBIOS 2.6 present.
16[ 0.000000] DMI: Dell Inc. PowerEdge R710/00W9X3, BIOS 6.4.0 07/23/2013
17[ 0.000000] tsc: Fast TSC calibration using PIT
18[ 0.000000] tsc: Detected 2394.095 MHz processor
19[ 0.003053] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
20[ 0.003055] e820: remove [mem 0x000a0000-0x000fffff] usable
21[ 0.003060] last_pfn = 0x130000 max_arch_pfn = 0x400000000
22[ 0.003064] MTRR default type: uncachable
23[ 0.003065] MTRR fixed ranges enabled:
24[ 0.003066] 00000-9FFFF write-back
25[ 0.003067] A0000-BFFFF uncachable
26[ 0.003068] C0000-C7FFF write-protect
27[ 0.003068] C8000-CFFFF write-back
28[ 0.003069] D0000-EBFFF uncachable
29[ 0.003070] EC000-FFFFF write-protect
30[ 0.003071] MTRR variable ranges enabled:
31[ 0.003072] 0 base 0000000000 mask FF80000000 write-back
32[ 0.003073] 1 base 0080000000 mask FFC0000000 write-back
33[ 0.003074] 2 base 00C0000000 mask FFF0000000 write-back
34[ 0.003075] 3 base 0100000000 mask FFE0000000 write-back
35[ 0.003076] 4 base 0120000000 mask FFF0000000 write-back
36[ 0.003077] 5 disabled
37[ 0.003077] 6 disabled
38[ 0.003078] 7 disabled
39[ 0.003078] 8 disabled
40[ 0.003079] 9 disabled
41[ 0.004462] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WP UC- WT
42[ 0.004897] e820: update [mem 0xd0000000-0xffffffff] usable ==> reserved
43[ 0.004902] last_pfn = 0xcf379 max_arch_pfn = 0x400000000
44[ 0.015129] found SMP MP-table at [mem 0x000fe710-0x000fe71f]
45[ 0.027519] Using GB pages for direct mapping
46[ 0.027522] BRK [0x02a01000, 0x02a01fff] PGTABLE
47[ 0.027525] BRK [0x02a02000, 0x02a02fff] PGTABLE
48[ 0.027526] BRK [0x02a03000, 0x02a03fff] PGTABLE
49[ 0.027585] BRK [0x02a04000, 0x02a04fff] PGTABLE
50[ 0.027985] RAMDISK: [mem 0x35778000-0x36bb3fff]
51[ 0.027990] ACPI: Early table checksum verification disabled
52[ 0.030667] ACPI: RSDP 0x00000000000F1150 000024 (v02 DELL )
53[ 0.030671] ACPI: XSDT 0x00000000000F1254 00009C (v01 DELL PE_SC3 00000001 DELL 00000001)
54[ 0.030677] ACPI: FACP 0x00000000CF3B3F9C 0000F4 (v03 DELL PE_SC3 00000001 DELL 00000001)
55[ 0.030684] ACPI: DSDT 0x00000000CF38F000 003DD0 (v01 DELL PE_SC3 00000001 INTL 20050624)
56[ 0.030689] ACPI: FACS 0x00000000CF3B6000 000040
57[ 0.030693] ACPI: FACS 0x00000000CF3B6000 000040
58[ 0.030696] ACPI: APIC 0x00000000CF3B3478 00015E (v01 DELL PE_SC3 00000001 DELL 00000001)
59[ 0.030701] ACPI: SPCR 0x00000000CF3B35D8 000050 (v01 DELL PE_SC3 00000001 DELL 00000001)
60[ 0.030705] ACPI: HPET 0x00000000CF3B362C 000038 (v01 DELL PE_SC3 00000001 DELL 00000001)
61[ 0.030709] ACPI: DM__ 0x00000000CF3B3668 0001B0 (v01 DELL PE_SC3 00000001 DELL 00000001)
62[ 0.030713] ACPI: MCFG 0x00000000CF3B38C4 00003C (v01 DELL PE_SC3 00000001 DELL 00000001)
63[ 0.030717] ACPI: WD__ 0x00000000CF3B3904 000134 (v01 DELL PE_SC3 00000001 DELL 00000001)
64[ 0.030722] ACPI: SLIC 0x00000000CF3B3A3C 000176 (v01 DELL PE_SC3 00000001 DELL 00000001)
65[ 0.030726] ACPI: ERST 0x00000000CF392F70 000270 (v01 DELL PE_SC3 00000001 DELL 00000001)
66[ 0.030730] ACPI: HEST 0x00000000CF3931E0 0003A8 (v01 DELL PE_SC3 00000001 DELL 00000001)
67[ 0.030734] ACPI: BERT 0x00000000CF392DD0 000030 (v01 DELL PE_SC3 00000001 DELL 00000001)
68[ 0.030738] ACPI: EINJ 0x00000000CF392E00 000170 (v01 DELL PE_SC3 00000001 DELL 00000001)
69[ 0.030742] ACPI: SRAT 0x00000000CF3B3BC0 000370 (v01 DELL PE_SC3 00000001 DELL 00000001)
70[ 0.030746] ACPI: TCPA 0x00000000CF3B3F34 000064 (v02 DELL PE_SC3 00000001 DELL 00000001)
71[ 0.030751] ACPI: SSDT 0x00000000CF3B7000 00220C (v01 INTEL PPM RCM 80000001 INTL 20061109)
72[ 0.030761] ACPI: Local APIC address 0xfee00000
73[ 0.030799] SRAT: PXM 1 -> APIC 0x20 -> Node 0
74[ 0.030801] SRAT: PXM 1 -> APIC 0x22 -> Node 0
75[ 0.030802] SRAT: PXM 1 -> APIC 0x32 -> Node 0
76[ 0.030803] SRAT: PXM 1 -> APIC 0x34 -> Node 0
77[ 0.030805] SRAT: PXM 1 -> APIC 0x21 -> Node 0
78[ 0.030806] SRAT: PXM 1 -> APIC 0x23 -> Node 0
79[ 0.030807] SRAT: PXM 1 -> APIC 0x33 -> Node 0
80[ 0.030808] SRAT: PXM 1 -> APIC 0x35 -> Node 0
81[ 0.030812] ACPI: SRAT: Node 0 PXM 1 [mem 0x00000000-0xcfffffff]
82[ 0.030814] ACPI: SRAT: Node 0 PXM 1 [mem 0x100000000-0x12fffffff]
83[ 0.030817] NUMA: Node 0 [mem 0x00000000-0xcfffffff] + [mem 0x100000000-0x12fffffff] -> [mem 0x00000000-0x12fffffff]
84[ 0.030829] NODE_DATA(0) allocated [mem 0x12ffd4000-0x12fffdfff]
85[ 0.031236] crashkernel: memory value expected
86[ 0.031254] Zone ranges:
87[ 0.031255] DMA [mem 0x0000000000001000-0x0000000000ffffff]
88[ 0.031257] DMA32 [mem 0x0000000001000000-0x00000000ffffffff]
89[ 0.031259] Normal [mem 0x0000000100000000-0x000000012fffffff]
90[ 0.031260] Device empty
91[ 0.031262] Movable zone start for each node
92[ 0.031266] Early memory node ranges
93[ 0.031267] node 0: [mem 0x0000000000001000-0x000000000009dfff]
94[ 0.031268] node 0: [mem 0x0000000000100000-0x00000000cf378fff]
95[ 0.031269] node 0: [mem 0x0000000100000000-0x000000012fffffff]
96[ 0.031273] Reserved but unavailable: 99 pages
97[ 0.031275] Initmem setup node 0 [mem 0x0000000000001000-0x000000012fffffff]
98[ 0.031277] On node 0 totalpages: 1045270
99[ 0.031278] DMA zone: 64 pages used for memmap
100[ 0.031279] DMA zone: 21 pages reserved
101[ 0.031280] DMA zone: 3997 pages, LIFO batch:0
102[ 0.031399] DMA32 zone: 13198 pages used for memmap
103[ 0.031400] DMA32 zone: 844665 pages, LIFO batch:63
104[ 0.057154] Normal zone: 3072 pages used for memmap
105[ 0.057157] Normal zone: 196608 pages, LIFO batch:63
106[ 0.062989] ACPI: PM-Timer IO Port: 0x808
107[ 0.062995] ACPI: Local APIC address 0xfee00000
108[ 0.063004] ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1])
109[ 0.063014] IOAPIC[0]: apic_id 0, version 32, address 0xfec00000, GSI 0-23
110[ 0.063021] IOAPIC[1]: apic_id 1, version 32, address 0xfec80000, GSI 32-55
111[ 0.063023] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
112[ 0.063025] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
113[ 0.063027] ACPI: IRQ0 used by override.
114[ 0.063029] ACPI: IRQ9 used by override.
115[ 0.063032] Using ACPI (MADT) for SMP configuration information
116[ 0.063034] ACPI: HPET id: 0x8086a301 base: 0xfed00000
117[ 0.063038] ACPI: SPCR: SPCR table version 1
118[ 0.063040] ACPI: SPCR: Unexpected SPCR Access Width. Defaulting to byte size
119[ 0.063041] ACPI: SPCR: console: uart,mmio,0x0
120[ 0.063044] smpboot: Allowing 8 CPUs, 0 hotplug CPUs
121[ 0.063058] PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
122[ 0.063060] PM: Registered nosave memory: [mem 0x0009e000-0x000fffff]
123[ 0.063062] PM: Registered nosave memory: [mem 0xcf379000-0xcf38efff]
124[ 0.063063] PM: Registered nosave memory: [mem 0xcf38f000-0xcf3cdfff]
125[ 0.063064] PM: Registered nosave memory: [mem 0xcf3ce000-0xcfffffff]
126[ 0.063065] PM: Registered nosave memory: [mem 0xd0000000-0xdfffffff]
127[ 0.063066] PM: Registered nosave memory: [mem 0xe0000000-0xefffffff]
128[ 0.063067] PM: Registered nosave memory: [mem 0xf0000000-0xfdffffff]
129[ 0.063068] PM: Registered nosave memory: [mem 0xfe000000-0xffffffff]
130[ 0.063071] [mem 0xd0000000-0xdfffffff] available for PCI devices
131[ 0.063072] Booting paravirtualized kernel on bare hardware
132[ 0.063076] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1910969940391419 ns
133[ 0.063094] random: get_random_bytes called from start_kernel+0x9b/0x535 with crng_init=0
134[ 0.063102] setup_percpu: NR_CPUS:8192 nr_cpumask_bits:8 nr_cpu_ids:8 nr_node_ids:1
135[ 0.063412] percpu: Embedded 46 pages/cpu s149464 r8192 d30760 u262144
136[ 0.063418] pcpu-alloc: s149464 r8192 d30760 u262144 alloc=1*2097152
137[ 0.063420] pcpu-alloc: [0] 0 1 2 3 4 5 6 7
138[ 0.063448] Built 1 zonelists, mobility grouping on. Total pages: 1028915
139[ 0.063450] Policy zone: Normal
140[ 0.063452] Kernel command line: BOOT_IMAGE=/vmlinuz-4.19.67-4.el7.x86_64 root=UUID=4b938ad0-5d9b-4482-8c8a-a70c132a51fe ro usbcore.autosuspend=-1 bootdegraded=true crashkernel=auto net.ifnames=0 biosdevname=0 rd.md.uuid=944c326c:ccd5c2c2:c08cad52:e8beecef rd.md.uuid=be9174fe:18e8f7ff:c08cad52:e8beecef rd.md.uuid=7d8d5db8:4e10d958:c08cad52:e8beecef LANG=en_US.UTF-8
141[ 0.086634] Memory: 4000232K/4181080K available (12300K kernel code, 2507K rwdata, 3588K rodata, 2352K init, 3228K bss, 180848K reserved, 0K cma-reserved)
142[ 0.086695] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
143[ 0.086702] Kernel/User page tables isolation: enabled
144[ 0.086751] ftrace: allocating 36218 entries in 142 pages
145[ 0.106811] rcu: Hierarchical RCU implementation.
146[ 0.106813] rcu: RCU restricting CPUs from NR_CPUS=8192 to nr_cpu_ids=8.
147[ 0.106815] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=8
148[ 0.110395] NR_IRQS: 524544, nr_irqs: 1032, preallocated irqs: 16
149[ 0.115041] Console: colour VGA+ 80x25
150[ 0.127299] console [tty0] enabled
151[ 0.127414] ACPI: Core revision 20180810
152[ 0.127681] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484882848 ns
153[ 0.127859] hpet clockevent registered
154[ 0.127863] APIC: Switch to symmetric I/O mode setup
155[ 0.127968] DMAR-IR: This system BIOS has enabled interrupt remapping
156on a chipset that contains an erratum making that
157feature unstable. To maintain system stability
158interrupt remapping is being disabled. Please
159contact your BIOS vendor for an update
160[ 0.128974] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
161[ 0.133864] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x22826d1da71, max_idle_ns: 440795251790 ns
162[ 0.134047] Calibrating delay loop (skipped), value calculated using timer frequency.. 4788.19 BogoMIPS (lpj=2394095)
163[ 0.134222] pid_max: default: 32768 minimum: 301
164[ 0.134352] Security Framework initialized
165[ 0.134457] SELinux: Initializing.
166[ 0.135626] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
167[ 0.136207] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
168[ 0.136339] Mount-cache hash table entries: 8192 (order: 4, 65536 bytes)
169[ 0.136463] Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes)
170[ 0.136797] CPU0: Thermal monitoring enabled (TM1)
171[ 0.136910] process: using mwait in idle threads
172[ 0.137015] Last level iTLB entries: 4KB 512, 2MB 7, 4MB 7
173[ 0.137038] Last level dTLB entries: 4KB 512, 2MB 32, 4MB 32, 1GB 0
174[ 0.137145] Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization
175[ 0.137310] Spectre V2 : Mitigation: Full generic retpoline
176[ 0.137415] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch
177[ 0.137578] Speculative Store Bypass: Vulnerable
178[ 0.137706] MDS: Vulnerable: Clear CPU buffers attempted, no microcode
179[ 0.138051] Freeing SMP alternatives memory: 32K
180[ 0.140515] smpboot: CPU 0 Converting physical 1 to logical package 0
181[ 0.141036] smpboot: CPU0: Intel(R) Xeon(R) CPU E5620 @ 2.40GHz (family: 0x6, model: 0x2c, stepping: 0x2)
182[ 0.141036] Performance Events: PEBS fmt1+, Westmere events, 16-deep LBR, Intel PMU driver.
183[ 0.141036] core: CPUID marked event: 'bus cycles' unavailable
184[ 0.141036] ... version: 3
185[ 0.141036] ... bit width: 48
186[ 0.141036] ... generic registers: 4
187[ 0.141036] ... value mask: 0000ffffffffffff
188[ 0.141039] ... max period: 000000007fffffff
189[ 0.141157] ... fixed-purpose events: 3
190[ 0.141263] ... event mask: 000000070000000f
191[ 0.141414] rcu: Hierarchical SRCU implementation.
192[ 0.142476] NMI watchdog: Enabled. Permanently consumes one hw-PMU counter.
193[ 0.142674] smp: Bringing up secondary CPUs ...
194[ 0.142873] x86: Booting SMP configuration:
195[ 0.142981] .... node #0, CPUs: #1 #2 #3 #4
196[ 0.150041] MDS CPU bug present and SMT on, data leak possible. See https://www.kernel.org/doc/html/latest/admin-guide/hw-vuln/mds.html for more details.
197[ 0.150448] #5 #6 #7
198[ 0.155095] smp: Brought up 1 node, 8 CPUs
199[ 0.155260] smpboot: Max logical packages: 1
200[ 0.155365] smpboot: Total of 8 processors activated (38305.52 BogoMIPS)
201[ 0.157100] devtmpfs: initialized
202[ 0.157204] x86/mm: Memory block size: 128MB
203[ 0.157749] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275000 ns
204[ 0.158050] futex hash table entries: 2048 (order: 5, 131072 bytes)
205[ 0.158237] pinctrl core: initialized pinctrl subsystem
206[ 0.158520] NET: Registered protocol family 16
207[ 0.159145] audit: initializing netlink subsys (disabled)
208[ 0.159258] audit: type=2000 audit(1576075202.030:1): state=initialized audit_enabled=0 res=1
209[ 0.159258] cpuidle: using governor menu
210[ 0.159258] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
211[ 0.159258] ACPI: bus type PCI registered
212[ 0.159258] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
213[ 0.159323] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
214[ 0.159499] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820
215[ 0.159623] PCI: Using configuration type 1 for base access
216[ 0.162075] HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages
217[ 0.162155] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
218[ 0.162288] ACPI: Added _OSI(Module Device)
219[ 0.162288] ACPI: Added _OSI(Processor Device)
220[ 0.162325] ACPI: Added _OSI(3.0 _SCP Extensions)
221[ 0.162428] ACPI: Added _OSI(Processor Aggregator Device)
222[ 0.163039] ACPI: Added _OSI(Linux-Dell-Video)
223[ 0.163144] ACPI: Added _OSI(Linux-Lenovo-NV-HDMI-Audio)
224[ 0.164799] ACPI: 2 ACPI AML tables successfully acquired and loaded
225[ 0.165253] ACPI: [Firmware Bug]: BIOS _OSI(Linux) query ignored
226[ 0.166902] ACPI: Interpreter enabled
227[ 0.167022] ACPI: (supports S0 S4 S5)
228[ 0.167038] ACPI: Using IOAPIC for interrupt routing
229[ 0.167236] HEST: Table parsing has been initialized.
230[ 0.167346] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
231[ 0.167661] ACPI: Enabled 2 GPEs in block 00 to 3F
232[ 0.173006] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
233[ 0.173043] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
234[ 0.173306] acpi PNP0A08:00: PCIe AER handled by firmware
235[ 0.173602] acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug PME PCIeCapability LTR]
236[ 0.173779] acpi PNP0A08:00: FADT indicates ASPM is unsupported, using BIOS configuration
237[ 0.174251] PCI host bridge to bus 0000:00
238[ 0.174362] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window]
239[ 0.174473] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window]
240[ 0.174584] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
241[ 0.174756] pci_bus 0000:00: root bus resource [mem 0xd0000000-0xfdffffff window]
242[ 0.174935] pci_bus 0000:00: root bus resource [mem 0xfed40000-0xfed44fff window]
243[ 0.175039] pci_bus 0000:00: root bus resource [bus 00-ff]
244[ 0.175158] pci 0000:00:00.0: [8086:3406] type 00 class 0x060000
245[ 0.175191] pci 0000:00:00.0: enabling Extended Tags
246[ 0.175334] pci 0000:00:00.0: PME# supported from D0 D3hot D3cold
247[ 0.175408] pci 0000:00:01.0: [8086:3408] type 01 class 0x060400
248[ 0.175436] pci 0000:00:01.0: enabling Extended Tags
249[ 0.175585] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
250[ 0.175659] pci 0000:00:03.0: [8086:340a] type 01 class 0x060400
251[ 0.175687] pci 0000:00:03.0: enabling Extended Tags
252[ 0.175831] pci 0000:00:03.0: PME# supported from D0 D3hot D3cold
253[ 0.175904] pci 0000:00:04.0: [8086:340b] type 01 class 0x060400
254[ 0.175930] pci 0000:00:04.0: enabling Extended Tags
255[ 0.176073] pci 0000:00:04.0: PME# supported from D0 D3hot D3cold
256[ 0.176143] pci 0000:00:05.0: [8086:340c] type 01 class 0x060400
257[ 0.176171] pci 0000:00:05.0: enabling Extended Tags
258[ 0.176309] pci 0000:00:05.0: PME# supported from D0 D3hot D3cold
259[ 0.176381] pci 0000:00:06.0: [8086:340d] type 01 class 0x060400
260[ 0.176409] pci 0000:00:06.0: enabling Extended Tags
261[ 0.176547] pci 0000:00:06.0: PME# supported from D0 D3hot D3cold
262[ 0.176617] pci 0000:00:07.0: [8086:340e] type 01 class 0x060400
263[ 0.176646] pci 0000:00:07.0: enabling Extended Tags
264[ 0.176787] pci 0000:00:07.0: PME# supported from D0 D3hot D3cold
265[ 0.176860] pci 0000:00:09.0: [8086:3410] type 01 class 0x060400
266[ 0.176888] pci 0000:00:09.0: enabling Extended Tags
267[ 0.177073] pci 0000:00:09.0: PME# supported from D0 D3hot D3cold
268[ 0.177149] pci 0000:00:14.0: [8086:342e] type 00 class 0x080000
269[ 0.177253] pci 0000:00:14.1: [8086:3422] type 00 class 0x080000
270[ 0.177357] pci 0000:00:14.2: [8086:3423] type 00 class 0x080000
271[ 0.177464] pci 0000:00:1a.0: [8086:2937] type 00 class 0x0c0300
272[ 0.177507] pci 0000:00:1a.0: reg 0x20: [io 0xec40-0xec5f]
273[ 0.177591] pci 0000:00:1a.1: [8086:2938] type 00 class 0x0c0300
274[ 0.177633] pci 0000:00:1a.1: reg 0x20: [io 0xec60-0xec7f]
275[ 0.177723] pci 0000:00:1a.7: [8086:293c] type 00 class 0x0c0320
276[ 0.177744] pci 0000:00:1a.7: reg 0x10: [mem 0xdf2fe000-0xdf2fe3ff]
277[ 0.177824] pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold
278[ 0.177888] pci 0000:00:1d.0: [8086:2934] type 00 class 0x0c0300
279[ 0.177930] pci 0000:00:1d.0: reg 0x20: [io 0xec80-0xec9f]
280[ 0.178054] pci 0000:00:1d.1: [8086:2935] type 00 class 0x0c0300
281[ 0.178097] pci 0000:00:1d.1: reg 0x20: [io 0xeca0-0xecbf]
282[ 0.178188] pci 0000:00:1d.7: [8086:293a] type 00 class 0x0c0320
283[ 0.178209] pci 0000:00:1d.7: reg 0x10: [mem 0xdf2ff000-0xdf2ff3ff]
284[ 0.178288] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
285[ 0.178347] pci 0000:00:1e.0: [8086:244e] type 01 class 0x060401
286[ 0.178451] pci 0000:00:1f.0: [8086:2918] type 00 class 0x060100
287[ 0.178529] pci 0000:00:1f.0: quirk: [io 0x0800-0x087f] claimed by ICH6 ACPI/GPIO/TCO
288[ 0.178710] pci 0000:00:1f.0: quirk: [io 0x0880-0x08bf] claimed by ICH6 GPIO
289[ 0.178822] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 1 PIO at 0c00 (mask 007f)
290[ 0.178992] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 2 PIO at 0ca0 (mask 000f)
291[ 0.179040] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 3 PIO at 00e0 (mask 000f)
292[ 0.179287] pci 0000:00:1f.2: [8086:2921] type 00 class 0x01018f
293[ 0.179303] pci 0000:00:1f.2: reg 0x10: [io 0xec10-0xec17]
294[ 0.179310] pci 0000:00:1f.2: reg 0x14: [io 0xec08-0xec0b]
295[ 0.179316] pci 0000:00:1f.2: reg 0x18: [io 0xec18-0xec1f]
296[ 0.179323] pci 0000:00:1f.2: reg 0x1c: [io 0xec0c-0xec0f]
297[ 0.179330] pci 0000:00:1f.2: reg 0x20: [io 0xec20-0xec2f]
298[ 0.179336] pci 0000:00:1f.2: reg 0x24: [io 0xec30-0xec3f]
299[ 0.179462] pci 0000:01:00.0: [14e4:1639] type 00 class 0x020000
300[ 0.179486] pci 0000:01:00.0: reg 0x10: [mem 0xd6000000-0xd7ffffff 64bit]
301[ 0.179580] pci 0000:01:00.0: PME# supported from D0 D3hot D3cold
302[ 0.179652] pci 0000:01:00.1: [14e4:1639] type 00 class 0x020000
303[ 0.179674] pci 0000:01:00.1: reg 0x10: [mem 0xd8000000-0xd9ffffff 64bit]
304[ 0.179768] pci 0000:01:00.1: PME# supported from D0 D3hot D3cold
305[ 0.179846] pci 0000:00:01.0: PCI bridge to [bus 01]
306[ 0.180042] pci 0000:00:01.0: bridge window [mem 0xd6000000-0xd9ffffff]
307[ 0.180090] pci 0000:02:00.0: [14e4:1639] type 00 class 0x020000
308[ 0.180113] pci 0000:02:00.0: reg 0x10: [mem 0xda000000-0xdbffffff 64bit]
309[ 0.180206] pci 0000:02:00.0: PME# supported from D0 D3hot D3cold
310[ 0.180276] pci 0000:02:00.1: [14e4:1639] type 00 class 0x020000
311[ 0.180299] pci 0000:02:00.1: reg 0x10: [mem 0xdc000000-0xddffffff 64bit]
312[ 0.180391] pci 0000:02:00.1: PME# supported from D0 D3hot D3cold
313[ 0.180468] pci 0000:00:03.0: PCI bridge to [bus 02]
314[ 0.180579] pci 0000:00:03.0: bridge window [mem 0xda000000-0xddffffff]
315[ 0.180622] pci 0000:03:00.0: [1000:0058] type 00 class 0x010000
316[ 0.180638] pci 0000:03:00.0: reg 0x10: [io 0xfc00-0xfcff]
317[ 0.180649] pci 0000:03:00.0: reg 0x14: [mem 0xdf4ec000-0xdf4effff 64bit]
318[ 0.180659] pci 0000:03:00.0: reg 0x1c: [mem 0xdf4f0000-0xdf4fffff 64bit]
319[ 0.180672] pci 0000:03:00.0: reg 0x30: [mem 0xdf300000-0xdf3fffff pref]
320[ 0.180678] pci 0000:03:00.0: enabling Extended Tags
321[ 0.180833] pci 0000:03:00.0: supports D1 D2
322[ 0.180849] pci 0000:03:00.0: 8.000 Gb/s available PCIe bandwidth, limited by 2.5 GT/s x4 link at 0000:00:04.0 (capable of 16.000 Gb/s with 2.5 GT/s x8 link)
323[ 0.184054] pci 0000:00:04.0: PCI bridge to [bus 03]
324[ 0.184170] pci 0000:00:04.0: bridge window [io 0xf000-0xffff]
325[ 0.184173] pci 0000:00:04.0: bridge window [mem 0xdf300000-0xdf4fffff]
326[ 0.184210] pci 0000:00:05.0: PCI bridge to [bus 04]
327[ 0.184362] pci 0000:00:06.0: PCI bridge to [bus 05]
328[ 0.184523] pci 0000:06:00.0: [14f1:8852] type 00 class 0x040000
329[ 0.184557] pci 0000:06:00.0: reg 0x10: [mem 0xdf000000-0xdf1fffff 64bit]
330[ 0.184684] pci 0000:06:00.0: supports D1 D2
331[ 0.184686] pci 0000:06:00.0: PME# supported from D0 D1 D2 D3hot
332[ 0.184779] pci 0000:00:07.0: PCI bridge to [bus 06]
333[ 0.184891] pci 0000:00:07.0: bridge window [mem 0xdf000000-0xdf1fffff]
334[ 0.184926] pci 0000:00:09.0: PCI bridge to [bus 07]
335[ 0.185056] pci_bus 0000:08: extended config space not accessible
336[ 0.185188] pci 0000:08:03.0: [102b:0532] type 00 class 0x030000
337[ 0.185204] pci 0000:08:03.0: reg 0x10: [mem 0xd5800000-0xd5ffffff pref]
338[ 0.185212] pci 0000:08:03.0: reg 0x14: [mem 0xde7fc000-0xde7fffff]
339[ 0.185221] pci 0000:08:03.0: reg 0x18: [mem 0xde800000-0xdeffffff]
340[ 0.185251] pci 0000:08:03.0: reg 0x30: [mem 0x00000000-0x0000ffff pref]
341[ 0.185339] pci 0000:00:1e.0: PCI bridge to [bus 08] (subtractive decode)
342[ 0.185455] pci 0000:00:1e.0: bridge window [mem 0xde000000-0xdeffffff]
343[ 0.185460] pci 0000:00:1e.0: bridge window [mem 0xd5800000-0xd5ffffff 64bit pref]
344[ 0.185461] pci 0000:00:1e.0: bridge window [io 0x0000-0x0cf7 window] (subtractive decode)
345[ 0.185463] pci 0000:00:1e.0: bridge window [io 0x0d00-0xffff window] (subtractive decode)
346[ 0.185464] pci 0000:00:1e.0: bridge window [mem 0x000a0000-0x000bffff window] (subtractive decode)
347[ 0.185465] pci 0000:00:1e.0: bridge window [mem 0xd0000000-0xfdffffff window] (subtractive decode)
348[ 0.185466] pci 0000:00:1e.0: bridge window [mem 0xfed40000-0xfed44fff window] (subtractive decode)
349[ 0.186724] ACPI: PCI Interrupt Link [LK00] (IRQs 3 4 5 6 7 10 11 14 *15)
350[ 0.186907] ACPI: PCI Interrupt Link [LK01] (IRQs 3 4 5 6 7 10 11 *14 15)
351[ 0.187106] ACPI: PCI Interrupt Link [LK02] (IRQs 3 4 5 6 7 10 *11 14 15)
352[ 0.187284] ACPI: PCI Interrupt Link [LK03] (IRQs 3 4 5 6 7 *10 11 14 15)
353[ 0.187463] ACPI: PCI Interrupt Link [LK04] (IRQs 3 4 *5 6 7 10 11 14 15)
354[ 0.187641] ACPI: PCI Interrupt Link [LK05] (IRQs 3 4 5 *6 7 10 11 14 15)
355[ 0.187819] ACPI: PCI Interrupt Link [LK06] (IRQs 3 4 5 6 7 10 11 14 15) *0, disabled.
356[ 0.188076] ACPI: PCI Interrupt Link [LK07] (IRQs 3 4 5 6 7 10 11 *14 15)
357[ 0.188304] pci 0000:08:03.0: vgaarb: setting as boot VGA device
358[ 0.188304] pci 0000:08:03.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
359[ 0.188328] pci 0000:08:03.0: vgaarb: bridge control possible
360[ 0.188435] vgaarb: loaded
361[ 0.188640] SCSI subsystem initialized
362[ 0.189060] ACPI: bus type USB registered
363[ 0.189179] usbcore: registered new interface driver usbfs
364[ 0.189293] usbcore: registered new interface driver hub
365[ 0.189424] usbcore: registered new device driver usb
366[ 0.189561] EDAC MC: Ver: 3.0.0
367[ 0.189561] PCI: Using ACPI for IRQ routing
368[ 0.195732] PCI: Discovered peer bus fe
369[ 0.195840] PCI: root bus fe: using default resources
370[ 0.195840] PCI: Probing PCI hardware (bus fe)
371[ 0.195861] PCI host bridge to bus 0000:fe
372[ 0.195972] pci_bus 0000:fe: root bus resource [io 0x0000-0xffff]
373[ 0.196038] pci_bus 0000:fe: root bus resource [mem 0x00000000-0xffffffffff]
374[ 0.196148] pci_bus 0000:fe: No busn resource found for root bus, will use [bus fe-ff]
375[ 0.196317] pci_bus 0000:fe: busn_res: can not insert [bus fe-ff] under domain [bus 00-ff] (conflicts with (null) [bus 00-ff])
376[ 0.196322] pci 0000:fe:00.0: [8086:2c70] type 00 class 0x060000
377[ 0.196365] pci 0000:fe:00.1: [8086:2d81] type 00 class 0x060000
378[ 0.196405] pci 0000:fe:02.0: [8086:2d90] type 00 class 0x060000
379[ 0.196442] pci 0000:fe:02.1: [8086:2d91] type 00 class 0x060000
380[ 0.196479] pci 0000:fe:02.2: [8086:2d92] type 00 class 0x060000
381[ 0.196517] pci 0000:fe:02.3: [8086:2d93] type 00 class 0x060000
382[ 0.196554] pci 0000:fe:02.4: [8086:2d94] type 00 class 0x060000
383[ 0.196592] pci 0000:fe:02.5: [8086:2d95] type 00 class 0x060000
384[ 0.196630] pci 0000:fe:03.0: [8086:2d98] type 00 class 0x060000
385[ 0.196666] pci 0000:fe:03.1: [8086:2d99] type 00 class 0x060000
386[ 0.196703] pci 0000:fe:03.2: [8086:2d9a] type 00 class 0x060000
387[ 0.196741] pci 0000:fe:03.4: [8086:2d9c] type 00 class 0x060000
388[ 0.196779] pci 0000:fe:04.0: [8086:2da0] type 00 class 0x060000
389[ 0.196818] pci 0000:fe:04.1: [8086:2da1] type 00 class 0x060000
390[ 0.196855] pci 0000:fe:04.2: [8086:2da2] type 00 class 0x060000
391[ 0.196893] pci 0000:fe:04.3: [8086:2da3] type 00 class 0x060000
392[ 0.196932] pci 0000:fe:05.0: [8086:2da8] type 00 class 0x060000
393[ 0.196969] pci 0000:fe:05.1: [8086:2da9] type 00 class 0x060000
394[ 0.197064] pci 0000:fe:05.2: [8086:2daa] type 00 class 0x060000
395[ 0.197102] pci 0000:fe:05.3: [8086:2dab] type 00 class 0x060000
396[ 0.197141] pci 0000:fe:06.0: [8086:2db0] type 00 class 0x060000
397[ 0.197177] pci 0000:fe:06.1: [8086:2db1] type 00 class 0x060000
398[ 0.197214] pci 0000:fe:06.2: [8086:2db2] type 00 class 0x060000
399[ 0.197252] pci 0000:fe:06.3: [8086:2db3] type 00 class 0x060000
400[ 0.197301] pci_bus 0000:fe: busn_res: [bus fe-ff] end is updated to fe
401[ 0.197303] pci_bus 0000:fe: busn_res: can not insert [bus fe] under domain [bus 00-ff] (conflicts with (null) [bus 00-ff])
402[ 0.197333] PCI: pci_cache_line_size set to 64 bytes
403[ 0.197404] e820: reserve RAM buffer [mem 0x0009e000-0x0009ffff]
404[ 0.197405] e820: reserve RAM buffer [mem 0xcf379000-0xcfffffff]
405[ 0.197502] NetLabel: Initializing
406[ 0.197607] NetLabel: domain hash size = 128
407[ 0.197715] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO
408[ 0.197842] NetLabel: unlabeled traffic allowed by default
409[ 0.197953] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0
410[ 0.197953] hpet0: 4 comparators, 64-bit 14.318180 MHz counter
411[ 0.200062] clocksource: Switched to clocksource tsc-early
412[ 0.211895] VFS: Disk quotas dquot_6.6.0
413[ 0.212021] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
414[ 0.212208] pnp: PnP ACPI init
415[ 0.212424] system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)
416[ 0.212461] pnp 00:01: Plug and Play ACPI device, IDs PNP0b00 (active)
417[ 0.212692] pnp 00:02: Plug and Play ACPI device, IDs PNP0501 (active)
418[ 0.212906] pnp 00:03: Plug and Play ACPI device, IDs PNP0501 (active)
419[ 0.213633] system 00:04: [io 0x0800-0x087f] has been reserved
420[ 0.213750] system 00:04: [io 0x0880-0x08ff] could not be reserved
421[ 0.213863] system 00:04: [io 0x0900-0x091f] has been reserved
422[ 0.213975] system 00:04: [io 0x0920-0x0923] has been reserved
423[ 0.214086] system 00:04: [io 0x0924] has been reserved
424[ 0.214195] system 00:04: [io 0x0c00-0x0c7f] has been reserved
425[ 0.214305] system 00:04: [io 0x0ca0-0x0ca7] has been reserved
426[ 0.214416] system 00:04: [io 0x0ca9-0x0cab] has been reserved
427[ 0.214528] system 00:04: [io 0x0cad-0x0caf] has been reserved
428[ 0.214646] system 00:04: Plug and Play ACPI device, IDs PNP0c01 (active)
429[ 0.214692] pnp 00:05: [irq 0 disabled]
430[ 0.214724] system 00:05: [io 0x0ca8] has been reserved
431[ 0.214838] system 00:05: [io 0x0cac] has been reserved
432[ 0.214949] system 00:05: Plug and Play ACPI device, IDs IPI0001 PNP0c01 (active)
433[ 0.215532] system 00:06: [mem 0xe0000000-0xefffffff] has been reserved
434[ 0.215656] system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active)
435[ 0.215728] system 00:07: [mem 0xfed90000-0xfed91fff] has been reserved
436[ 0.215842] system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active)
437[ 0.216002] pnp: PnP ACPI: found 8 devices
438[ 0.222174] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
439[ 0.222392] pci 0000:00:01.0: PCI bridge to [bus 01]
440[ 0.222501] pci 0000:00:01.0: bridge window [mem 0xd6000000-0xd9ffffff]
441[ 0.222619] pci 0000:00:03.0: PCI bridge to [bus 02]
442[ 0.222728] pci 0000:00:03.0: bridge window [mem 0xda000000-0xddffffff]
443[ 0.222840] pci 0000:00:04.0: PCI bridge to [bus 03]
444[ 0.222946] pci 0000:00:04.0: bridge window [io 0xf000-0xffff]
445[ 0.223058] pci 0000:00:04.0: bridge window [mem 0xdf300000-0xdf4fffff]
446[ 0.223173] pci 0000:00:05.0: PCI bridge to [bus 04]
447[ 0.223286] pci 0000:00:06.0: PCI bridge to [bus 05]
448[ 0.223404] pci 0000:00:07.0: PCI bridge to [bus 06]
449[ 0.223516] pci 0000:00:07.0: bridge window [mem 0xdf000000-0xdf1fffff]
450[ 0.223647] pci 0000:00:09.0: PCI bridge to [bus 07]
451[ 0.223786] pci 0000:08:03.0: BAR 6: assigned [mem 0xde000000-0xde00ffff pref]
452[ 0.223978] pci 0000:00:1e.0: PCI bridge to [bus 08]
453[ 0.224106] pci 0000:00:1e.0: bridge window [mem 0xde000000-0xdeffffff]
454[ 0.224231] pci 0000:00:1e.0: bridge window [mem 0xd5800000-0xd5ffffff 64bit pref]
455[ 0.224430] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window]
456[ 0.224431] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window]
457[ 0.224433] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
458[ 0.224434] pci_bus 0000:00: resource 7 [mem 0xd0000000-0xfdffffff window]
459[ 0.224435] pci_bus 0000:00: resource 8 [mem 0xfed40000-0xfed44fff window]
460[ 0.224436] pci_bus 0000:01: resource 1 [mem 0xd6000000-0xd9ffffff]
461[ 0.224438] pci_bus 0000:02: resource 1 [mem 0xda000000-0xddffffff]
462[ 0.224439] pci_bus 0000:03: resource 0 [io 0xf000-0xffff]
463[ 0.224440] pci_bus 0000:03: resource 1 [mem 0xdf300000-0xdf4fffff]
464[ 0.224442] pci_bus 0000:06: resource 1 [mem 0xdf000000-0xdf1fffff]
465[ 0.224443] pci_bus 0000:08: resource 1 [mem 0xde000000-0xdeffffff]
466[ 0.224444] pci_bus 0000:08: resource 2 [mem 0xd5800000-0xd5ffffff 64bit pref]
467[ 0.224445] pci_bus 0000:08: resource 4 [io 0x0000-0x0cf7 window]
468[ 0.224446] pci_bus 0000:08: resource 5 [io 0x0d00-0xffff window]
469[ 0.224448] pci_bus 0000:08: resource 6 [mem 0x000a0000-0x000bffff window]
470[ 0.224449] pci_bus 0000:08: resource 7 [mem 0xd0000000-0xfdffffff window]
471[ 0.224450] pci_bus 0000:08: resource 8 [mem 0xfed40000-0xfed44fff window]
472[ 0.224470] pci_bus 0000:fe: resource 4 [io 0x0000-0xffff]
473[ 0.224471] pci_bus 0000:fe: resource 5 [mem 0x00000000-0xffffffffff]
474[ 0.224501] NET: Registered protocol family 2
475[ 0.224777] tcp_listen_portaddr_hash hash table entries: 2048 (order: 3, 32768 bytes)
476[ 0.224980] TCP established hash table entries: 32768 (order: 6, 262144 bytes)
477[ 0.225228] TCP bind hash table entries: 32768 (order: 7, 524288 bytes)
478[ 0.225427] TCP: Hash tables configured (established 32768 bind 32768)
479[ 0.225590] UDP hash table entries: 2048 (order: 4, 65536 bytes)
480[ 0.225720] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
481[ 0.225884] NET: Registered protocol family 1
482[ 0.239796] pci 0000:00:1a.7: quirk_usb_early_handoff+0x0/0x6d0 took 12566 usecs
483[ 0.241307] pci 0000:08:03.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
484[ 0.241517] PCI: CLS 64 bytes, default 64
485[ 0.241565] Unpacking initramfs...
486[ 0.578653] Freeing initrd memory: 20720K
487[ 0.578791] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
488[ 0.578902] software IO TLB: mapped [mem 0xcb379000-0xcf379000] (64MB)
489[ 0.580524] Initialise system trusted keyrings
490[ 0.580667] workingset: timestamp_bits=36 max_order=20 bucket_order=0
491[ 0.582173] zbud: loaded
492[ 1.042453] NET: Registered protocol family 38
493[ 1.042567] Key type asymmetric registered
494[ 1.042671] Asymmetric key parser 'x509' registered
495[ 1.042788] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 247)
496[ 1.042992] io scheduler noop registered
497[ 1.043096] io scheduler deadline registered (default)
498[ 1.043239] io scheduler cfq registered
499[ 1.045950] pcieport 0000:00:01.0: Signaling PME with IRQ 25
500[ 1.047249] pcieport 0000:00:03.0: Signaling PME with IRQ 26
501[ 1.047379] pcieport 0000:00:04.0: Signaling PME with IRQ 27
502[ 1.047517] pcieport 0000:00:05.0: Signaling PME with IRQ 28
503[ 1.047646] pcieport 0000:00:06.0: Signaling PME with IRQ 29
504[ 1.047777] pcieport 0000:00:07.0: Signaling PME with IRQ 30
505[ 1.047905] pcieport 0000:00:09.0: Signaling PME with IRQ 31
506[ 1.048055] intel_idle: MWAIT substates: 0x1120
507[ 1.048056] intel_idle: v0.4.1 model 0x2C
508[ 1.048378] intel_idle: lapic_timer_reliable_states 0xffffffff
509[ 1.048477] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0
510[ 1.048667] ACPI: Power Button [PWRF]
511[ 1.049193] ERST: Error Record Serialization Table (ERST) support is initialized.
512[ 1.049360] pstore: Registered erst as persistent store backend
513[ 1.049672] GHES: APEI firmware first mode is enabled by APEI bit and WHEA _OSC.
514[ 1.049922] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
515[ 1.070598] 00:02: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
516[ 1.091427] 00:03: ttyS1 at I/O 0x2f8 (irq = 3, base_baud = 115200) is a 16550A
517[ 1.092898] Non-volatile memory driver v1.3
518[ 1.093113] Linux agpgart interface v0.103
519[ 1.094606] rdac: device handler registered
520[ 1.094911] hp_sw: device handler registered
521[ 1.095021] emc: device handler registered
522[ 1.095190] alua: device handler registered
523[ 1.095603] libphy: Fixed MDIO Bus: probed
524[ 1.095811] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
525[ 1.095924] ehci-pci: EHCI PCI platform driver
526[ 1.096348] ehci-pci 0000:00:1a.7: EHCI Host Controller
527[ 1.096583] ehci-pci 0000:00:1a.7: new USB bus registered, assigned bus number 1
528[ 1.096763] ehci-pci 0000:00:1a.7: debug port 1
529[ 1.100786] ehci-pci 0000:00:1a.7: cache line size of 64 is not supported
530[ 1.100798] ehci-pci 0000:00:1a.7: irq 19, io mem 0xdf2fe000
531[ 1.108626] ehci-pci 0000:00:1a.7: USB 2.0 started, EHCI 1.00
532[ 1.108810] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 4.19
533[ 1.108989] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
534[ 1.109160] usb usb1: Product: EHCI Host Controller
535[ 1.109267] usb usb1: Manufacturer: Linux 4.19.67-4.el7.x86_64 ehci_hcd
536[ 1.109376] usb usb1: SerialNumber: 0000:00:1a.7
537[ 1.109780] hub 1-0:1.0: USB hub found
538[ 1.109901] hub 1-0:1.0: 4 ports detected
539[ 1.110452] ehci-pci 0000:00:1d.7: EHCI Host Controller
540[ 1.110743] ehci-pci 0000:00:1d.7: new USB bus registered, assigned bus number 2
541[ 1.110924] ehci-pci 0000:00:1d.7: debug port 1
542[ 1.114946] ehci-pci 0000:00:1d.7: cache line size of 64 is not supported
543[ 1.114959] ehci-pci 0000:00:1d.7: irq 21, io mem 0xdf2ff000
544[ 1.122638] ehci-pci 0000:00:1d.7: USB 2.0 started, EHCI 1.00
545[ 1.122809] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 4.19
546[ 1.122989] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
547[ 1.123155] usb usb2: Product: EHCI Host Controller
548[ 1.123262] usb usb2: Manufacturer: Linux 4.19.67-4.el7.x86_64 ehci_hcd
549[ 1.123373] usb usb2: SerialNumber: 0000:00:1d.7
550[ 1.123780] hub 2-0:1.0: USB hub found
551[ 1.123902] hub 2-0:1.0: 4 ports detected
552[ 1.124138] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
553[ 1.124255] ohci-pci: OHCI PCI platform driver
554[ 1.124379] uhci_hcd: USB Universal Host Controller Interface driver
555[ 1.124788] uhci_hcd 0000:00:1a.0: UHCI Host Controller
556[ 1.125095] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3
557[ 1.125275] uhci_hcd 0000:00:1a.0: detected 2 ports
558[ 1.125424] uhci_hcd 0000:00:1a.0: irq 17, io base 0x0000ec40
559[ 1.125594] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 4.19
560[ 1.125765] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
561[ 1.125928] usb usb3: Product: UHCI Host Controller
562[ 1.126034] usb usb3: Manufacturer: Linux 4.19.67-4.el7.x86_64 uhci_hcd
563[ 1.126144] usb usb3: SerialNumber: 0000:00:1a.0
564[ 1.126399] hub 3-0:1.0: USB hub found
565[ 1.126515] hub 3-0:1.0: 2 ports detected
566[ 1.126998] uhci_hcd 0000:00:1a.1: UHCI Host Controller
567[ 1.127198] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4
568[ 1.127377] uhci_hcd 0000:00:1a.1: detected 2 ports
569[ 1.127514] uhci_hcd 0000:00:1a.1: irq 18, io base 0x0000ec60
570[ 1.127676] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 4.19
571[ 1.127847] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
572[ 1.128013] usb usb4: Product: UHCI Host Controller
573[ 1.128121] usb usb4: Manufacturer: Linux 4.19.67-4.el7.x86_64 uhci_hcd
574[ 1.128232] usb usb4: SerialNumber: 0000:00:1a.1
575[ 1.128493] hub 4-0:1.0: USB hub found
576[ 1.128609] hub 4-0:1.0: 2 ports detected
577[ 1.129070] uhci_hcd 0000:00:1d.0: UHCI Host Controller
578[ 1.129292] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 5
579[ 1.129469] uhci_hcd 0000:00:1d.0: detected 2 ports
580[ 1.129603] uhci_hcd 0000:00:1d.0: irq 21, io base 0x0000ec80
581[ 1.129759] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 4.19
582[ 1.129926] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
583[ 1.130091] usb usb5: Product: UHCI Host Controller
584[ 1.130198] usb usb5: Manufacturer: Linux 4.19.67-4.el7.x86_64 uhci_hcd
585[ 1.130307] usb usb5: SerialNumber: 0000:00:1d.0
586[ 1.130577] hub 5-0:1.0: USB hub found
587[ 1.130688] hub 5-0:1.0: 2 ports detected
588[ 1.131161] uhci_hcd 0000:00:1d.1: UHCI Host Controller
589[ 1.131368] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 6
590[ 1.131539] uhci_hcd 0000:00:1d.1: detected 2 ports
591[ 1.131683] uhci_hcd 0000:00:1d.1: irq 20, io base 0x0000eca0
592[ 1.131839] usb usb6: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 4.19
593[ 1.132008] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
594[ 1.132175] usb usb6: Product: UHCI Host Controller
595[ 1.132286] usb usb6: Manufacturer: Linux 4.19.67-4.el7.x86_64 uhci_hcd
596[ 1.132395] usb usb6: SerialNumber: 0000:00:1d.1
597[ 1.132668] hub 6-0:1.0: USB hub found
598[ 1.132781] hub 6-0:1.0: 2 ports detected
599[ 1.133024] usbcore: registered new interface driver usbserial_generic
600[ 1.133137] usbserial: USB Serial support registered for generic
601[ 1.133251] usbcore: registered new interface driver wishbone_serial
602[ 1.133362] usbserial: USB Serial support registered for wishbone_serial
603[ 1.133502] i8042: PNP: No PS/2 controller found.
604[ 1.133612] i8042: Probing ports directly.
605[ 1.136652] serio: i8042 KBD port at 0x60,0x64 irq 1
606[ 1.136792] serio: i8042 AUX port at 0x60,0x64 irq 12
607[ 1.137139] mousedev: PS/2 mouse device common for all mice
608[ 1.137414] rtc_cmos 00:01: RTC can wake from S4
609[ 1.137719] rtc_cmos 00:01: registered as rtc0
610[ 1.137850] rtc_cmos 00:01: alarms up to one day, y3k, 242 bytes nvram, hpet irqs
611[ 1.138098] ledtrig-cpu: registered to indicate activity on CPUs
612[ 1.138536] hidraw: raw HID events driver (C) Jiri Kosina
613[ 1.138740] usbcore: registered new interface driver usbhid
614[ 1.138847] usbhid: USB HID core driver
615[ 1.139006] drop_monitor: Initializing network drop monitor service
616[ 1.139257] Initializing XFRM netlink socket
617[ 1.139497] NET: Registered protocol family 10
618[ 1.139877] Segment Routing with IPv6
619[ 1.140002] NET: Registered protocol family 17
620[ 1.140184] Bridge firewalling registered
621[ 1.141357] mce: Using 9 MCE banks
622[ 1.141552] microcode: sig=0x206c2, pf=0x1, revision=0x1a
623[ 1.141934] microcode: Microcode Update Driver: v2.2.
624[ 1.141945] sched_clock: Marking stable (1123573466, 18355131)->(1260020079, -118091482)
625[ 1.142753] registered taskstats version 1
626[ 1.142860] Loading compiled-in X.509 certificates
627[ 1.142991] zswap: loaded using pool lzo/zbud
628[ 1.146414] pstore: Unknown compression: deflate
629[ 1.149372] Key type big_key registered
630[ 1.152869] Key type trusted registered
631[ 1.156385] Key type encrypted registered
632[ 1.156505] ima: No TPM chip found, activating TPM-bypass!
633[ 1.156620] ima: Allocated hash algorithm: sha1
634[ 1.156744] evm: Initialising EVM extended attributes:
635[ 1.156852] evm: security.selinux
636[ 1.156956] evm: security.ima
637[ 1.157066] evm: security.capability
638[ 1.157171] evm: HMAC attrs: 0x1
639[ 1.157816] rtc_cmos 00:01: setting system clock to 2019-12-11 14:40:03 UTC (1576075203)
640[ 1.161077] Freeing unused kernel image memory: 2352K
641[ 1.169125] Write protecting the kernel read-only data: 18432k
642[ 1.170287] Freeing unused kernel image memory: 2012K
643[ 1.170702] Freeing unused kernel image memory: 508K
644[ 1.170964] Run /init as init process
645[ 1.174391] ERST: NVRAM ERST Log Address Range not implemented yet.
646[ 1.174634] random: systemd: uninitialized urandom read (16 bytes read)
647[ 1.175173] random: systemd: uninitialized urandom read (16 bytes read)
648[ 1.175303] random: systemd: uninitialized urandom read (16 bytes read)
649[ 1.179586] systemd[1]: systemd 219 running in system mode. (+PAM +AUDIT +SELINUX +IMA -APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ -LZ4 -SECCOMP +BLKID +ELFUTILS +KMOD +IDN)
650[ 1.191596] systemd[1]: Detected architecture x86-64.
651[ 1.191718] systemd[1]: Running in initial RAM disk.
652[ 1.192412] systemd[1]: Set hostname to <ddrx0160>.
653[ 1.239245] systemd[1]: Reached target Local File Systems.
654[ 1.239369] systemd[1]: Starting Local File Systems.
655[ 1.239875] systemd[1]: Reached target Swap.
656[ 1.239993] systemd[1]: Starting Swap.
657[ 1.240504] systemd[1]: Reached target Timers.
658[ 1.240625] systemd[1]: Starting Timers.
659[ 1.435092] usb 1-3: new high-speed USB device number 2 using ehci-pci
660[ 1.515214] bnx2: QLogic bnx2 Gigabit Ethernet Driver v2.2.6 (January 29, 2014)
661[ 1.516150] Fusion MPT base driver 3.04.20
662[ 1.516265] Copyright (c) 1999-2008 LSI Corporation
663[ 1.516383] bnx2 0000:01:00.0 eth0: Broadcom NetXtreme II BCM5709 1000Base-T (C0) PCI Express found at mem d6000000, IRQ 32, node addr 00:24:e8:75:3b:10
664[ 1.517307] bnx2 0000:01:00.1 eth1: Broadcom NetXtreme II BCM5709 1000Base-T (C0) PCI Express found at mem d8000000, IRQ 33, node addr 00:24:e8:75:3b:12
665[ 1.518409] bnx2 0000:02:00.0 eth2: Broadcom NetXtreme II BCM5709 1000Base-T (C0) PCI Express found at mem da000000, IRQ 34, node addr 00:24:e8:75:3b:14
666[ 1.518710] Fusion MPT SAS Host driver 3.04.20
667[ 1.519495] mptbase: ioc0: Initiating bringup
668[ 1.519614] bnx2 0000:02:00.1 eth3: Broadcom NetXtreme II BCM5709 1000Base-T (C0) PCI Express found at mem dc000000, IRQ 35, node addr 00:24:e8:75:3b:16
669[ 1.528623] libata version 3.00 loaded.
670[ 1.529335] ata_piix 0000:00:1f.2: version 2.13
671[ 1.529810] ata_piix 0000:00:1f.2: MAP [ P0 -- P1 -- ]
672[ 1.542880] [TTM] Zone kernel: Available graphics memory: 2012928 kiB
673[ 1.542998] [TTM] Initializing pool allocator
674[ 1.543134] [TTM] Initializing DMA pool allocator
675[ 1.563471] usb 1-3: New USB device found, idVendor=0424, idProduct=2514, bcdDevice= 0.00
676[ 1.563639] usb 1-3: New USB device strings: Mfr=0, Product=0, SerialNumber=0
677[ 1.564400] hub 1-3:1.0: USB hub found
678[ 1.564578] hub 1-3:1.0: 3 ports detected
679[ 1.571615] fbcon: mgadrmfb (fb0) is primary device
680[ 1.633114] tsc: Refined TSC clocksource calibration: 2393.999 MHz
681[ 1.633122] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x22821267f49, max_idle_ns: 440795240327 ns
682[ 1.633714] clocksource: Switched to clocksource tsc
683[ 1.688911] scsi host0: ata_piix
684[ 1.689400] scsi host1: ata_piix
685[ 1.689480] ata1: SATA max UDMA/133 cmd 0xec10 ctl 0xec08 bmdma 0xec20 irq 23
686[ 1.689491] ata2: SATA max UDMA/133 cmd 0xec18 ctl 0xec0c bmdma 0xec28 irq 23
687[ 1.713321] Console: switching to colour frame buffer device 128x48
688[ 1.769414] mgag200 0000:08:03.0: fb0: mgadrmfb frame buffer device
689[ 1.781116] [drm] Initialized mgag200 1.0.0 20110418 for 0000:08:03.0 on minor 0
690[ 1.807088] usb 5-2: new full-speed USB device number 2 using uhci_hcd
691[ 1.857124] usb 1-3.3: new high-speed USB device number 3 using ehci-pci
692[ 1.873052] ioc0: LSISAS1068E B3: Capabilities={Initiator}
693[ 1.958001] usb 1-3.3: New USB device found, idVendor=058f, idProduct=6387, bcdDevice= 1.01
694[ 1.958070] usb 1-3.3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
695[ 1.958115] usb 1-3.3: Product: Mass Storage
696[ 1.958143] usb 1-3.3: Manufacturer: Generic
697[ 1.958171] usb 1-3.3: SerialNumber: FEC83490
698[ 1.960973] usb-storage 1-3.3:1.0: USB Mass Storage device detected
699[ 1.961359] scsi host2: usb-storage 1-3.3:1.0
700[ 1.961488] usbcore: registered new interface driver usb-storage
701[ 1.962010] usbcore: registered new interface driver uas
702[ 1.964801] usb 5-2: New USB device found, idVendor=0624, idProduct=0248, bcdDevice= 0.00
703[ 1.966266] usb 5-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
704[ 1.967687] usb 5-2: Product: USB Composite Device-0
705[ 1.969098] usb 5-2: Manufacturer: Avocent
706[ 1.970478] usb 5-2: SerialNumber: 20120430
707[ 1.994343] input: Avocent USB Composite Device-0 as /devices/pci0000:00/0000:00:1d.0/usb5/5-2/5-2:1.0/0003:0624:0248.0001/input/input4
708[ 2.046435] hid-generic 0003:0624:0248.0001: input,hidraw0: USB HID v1.00 Keyboard [Avocent USB Composite Device-0] on usb-0000:00:1d.0-2/input0
709[ 2.056142] input: Avocent USB Composite Device-0 as /devices/pci0000:00/0000:00:1d.0/usb5/5-2/5-2:1.1/0003:0624:0248.0002/input/input5
710[ 2.059428] hid-generic 0003:0624:0248.0002: input,hidraw1: USB HID v1.00 Mouse [Avocent USB Composite Device-0] on usb-0000:00:1d.0-2/input1
711[ 2.152170] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
712[ 2.172276] ata1.00: ATAPI: TEAC DVD-ROM DV-28SW, R.2A, max UDMA/100
713[ 2.212908] ata1.00: configured for UDMA/100
714[ 2.223758] scsi 0:0:0:0: CD-ROM TEAC DVD-ROM DV-28SW R.2A PQ: 0 ANSI: 5
715[ 2.728128] ata2: failed to resume link (SControl 0)
716[ 2.740578] ata2: SATA link down (SStatus 4 SControl 0)
717[ 2.791238] sr 0:0:0:0: [sr0] scsi3-mmc drive: 24x/24x cd/rw xa/form2 cdda tray
718[ 2.792887] cdrom: Uniform CD-ROM driver Revision: 3.20
719[ 2.794797] sr 0:0:0:0: Attached scsi CD-ROM sr0
720[ 2.978127] scsi 2:0:0:0: Direct-Access Generic Flash Disk 8.07 PQ: 0 ANSI: 4
721[ 2.986229] sd 2:0:0:0: [sda] 16099328 512-byte logical blocks: (8.24 GB/7.68 GiB)
722[ 2.988961] sd 2:0:0:0: [sda] Write Protect is off
723[ 2.990639] sd 2:0:0:0: [sda] Mode Sense: 23 00 00 00
724[ 2.991733] sd 2:0:0:0: [sda] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
725[ 2.998890] sda: sda1
726[ 3.004085] sd 2:0:0:0: [sda] Attached SCSI removable disk
727[ 3.058454] random: fast init done
728[ 18.123709] scsi host3: ioc0: LSISAS1068E B3, FwRev=00192f00h, Ports=1, MaxQ=266, IRQ=36
729[ 18.172485] mptsas: ioc0: attaching sata device: fw_channel 0, fw_id 0, phy 0, sas_addr 0x1221000000000000
730[ 18.186653] scsi 3:0:0:0: Direct-Access ATA SAMSUNG HE103SJ 0001 PQ: 0 ANSI: 5
731[ 18.209443] mptsas: ioc0: attaching sata device: fw_channel 0, fw_id 4, phy 4, sas_addr 0x1221000004000000
732[ 18.212167] scsi 3:0:1:0: Direct-Access ATA Hitachi HUA72201 A55B PQ: 0 ANSI: 5
733[ 18.218787] mptsas: ioc0: attaching sata device: fw_channel 0, fw_id 1, phy 1, sas_addr 0x1221000001000000
734[ 18.222318] sd 3:0:1:0: [sdc] 1953525168 512-byte logical blocks: (1.00 TB/932 GiB)
735[ 18.226876] sd 3:0:0:0: [sdb] 1953525168 512-byte logical blocks: (1.00 TB/932 GiB)
736[ 18.231160] scsi 3:0:2:0: Direct-Access ATA SAMSUNG HE103SJ 0001 PQ: 0 ANSI: 5
737[ 18.252223] mptsas: ioc0: attaching sata device: fw_channel 0, fw_id 2, phy 2, sas_addr 0x1221000002000000
738[ 18.264534] scsi 3:0:3:0: Direct-Access ATA SAMSUNG HE103SJ 0001 PQ: 0 ANSI: 5
739[ 18.270257] sd 3:0:2:0: [sdd] 1953525168 512-byte logical blocks: (1.00 TB/932 GiB)
740[ 18.285153] mptsas: ioc0: attaching sata device: fw_channel 0, fw_id 3, phy 3, sas_addr 0x1221000003000000
741[ 18.297785] scsi 3:0:4:0: Direct-Access ATA SAMSUNG HE103SJ 0001 PQ: 0 ANSI: 5
742[ 18.303482] sd 3:0:3:0: [sde] 1953525168 512-byte logical blocks: (1.00 TB/932 GiB)
743[ 18.336480] mptsas: ioc0: attaching sata device: fw_channel 0, fw_id 5, phy 5, sas_addr 0x1221000005000000
744[ 18.341029] scsi 3:0:5:0: Direct-Access ATA Hitachi HUA72201 A55B PQ: 0 ANSI: 5
745[ 18.352148] sd 3:0:5:0: [sdg] 1953525168 512-byte logical blocks: (1.00 TB/932 GiB)
746[ 18.354905] sd 3:0:4:0: [sdf] 1953525168 512-byte logical blocks: (1.00 TB/932 GiB)
747[ 18.397745] sd 3:0:1:0: [sdc] Write Protect is off
748[ 18.399707] sd 3:0:1:0: [sdc] Mode Sense: 73 00 00 08
749[ 18.401893] sd 3:0:1:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
750[ 18.449067] sd 3:0:0:0: [sdb] Write Protect is off
751[ 18.449070] sd 3:0:0:0: [sdb] Mode Sense: 73 00 00 08
752[ 18.460820] sd 3:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
753[ 18.489371] sd 3:0:2:0: [sdd] Write Protect is off
754[ 18.491321] sd 3:0:2:0: [sdd] Mode Sense: 73 00 00 08
755[ 18.503205] sd 3:0:2:0: [sdd] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
756[ 18.531328] sd 3:0:3:0: [sde] Write Protect is off
757[ 18.533230] sd 3:0:3:0: [sde] Mode Sense: 73 00 00 08
758[ 18.535364] sd 3:0:5:0: [sdg] Write Protect is off
759[ 18.537209] sd 3:0:5:0: [sdg] Mode Sense: 73 00 00 08
760[ 18.539434] sd 3:0:5:0: [sdg] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
761[ 18.545106] sd 3:0:3:0: [sde] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
762[ 18.571888] sd 3:0:4:0: [sdf] Write Protect is off
763[ 18.573643] sd 3:0:4:0: [sdf] Mode Sense: 73 00 00 08
764[ 18.585577] sd 3:0:4:0: [sdf] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
765[ 18.588867] sdc: sdc1 sdc2 sdc3 sdc4
766[ 18.696816] sdb: sdb1 sdb2 sdb3 sdb4
767[ 18.726637] sdg: sdg1 sdg2 sdg3 sdg4
768[ 18.744967] sdd: sdd1 sdd2 sdd3 sdd4
769[ 18.766622] sd 3:0:1:0: [sdc] Attached SCSI disk
770[ 18.786621] sde: sde1 sde2 sde3 sde4
771[ 18.827828] sdf: sdf1 sdf2 sdf3 sdf4
772[ 18.904272] sd 3:0:5:0: [sdg] Attached SCSI disk
773[ 18.933016] sd 3:0:0:0: [sdb] Attached SCSI disk
774[ 18.981513] sd 3:0:2:0: [sdd] Attached SCSI disk
775[ 19.023500] sd 3:0:3:0: [sde] Attached SCSI disk
776[ 19.064037] sd 3:0:4:0: [sdf] Attached SCSI disk
777[ 19.098066] random: crng init done
778[ 19.098068] random: 7 urandom warning(s) missed due to ratelimiting
779[ 19.393603] md/raid1:md1: active with 6 out of 6 mirrors
780[ 19.395169] md1: detected capacity change from 0 to 536805376
781[ 19.416083] raid6: sse2x1 gen() 3906 MB/s
782[ 19.434057] raid6: sse2x1 xor() 3048 MB/s
783[ 19.452079] raid6: sse2x2 gen() 4617 MB/s
784[ 19.470121] raid6: sse2x2 xor() 3583 MB/s
785[ 19.487071] raid6: sse2x4 gen() 5269 MB/s
786[ 19.504113] raid6: sse2x4 xor() 3617 MB/s
787[ 19.504114] raid6: using algorithm sse2x4 gen() 5269 MB/s
788[ 19.504115] raid6: .... xor() 3617 MB/s, rmw enabled
789[ 19.504116] raid6: using ssse3x2 recovery algorithm
790[ 19.504649] async_tx: api initialized (async)
791[ 19.505092] xor: measuring software checksum speed
792[ 19.515075] prefetch64-sse: 6584.000 MB/sec
793[ 19.531107] generic_sse: 5844.000 MB/sec
794[ 19.532196] xor: using function: prefetch64-sse (6584.000 MB/sec)
795[ 19.536977] md/raid:md2: device sde2 operational as raid disk 2
796[ 19.537005] md/raid:md3: device sde3 operational as raid disk 2
797[ 19.538068] md/raid:md2: device sdb2 operational as raid disk 0
798[ 19.539094] md/raid:md3: device sdb3 operational as raid disk 0
799[ 19.540083] md/raid:md2: device sdc2 operational as raid disk 4
800[ 19.540086] md/raid:md2: device sdg2 operational as raid disk 3
801[ 19.541029] md/raid:md3: device sdd3 operational as raid disk 5
802[ 19.541987] md/raid:md2: device sdf2 operational as raid disk 1
803[ 19.542918] md/raid:md3: device sdc3 operational as raid disk 4
804[ 19.543826] md/raid:md2: device sdd2 operational as raid disk 5
805[ 19.544661] md/raid:md2: raid level 6 active with 6 out of 6 devices, algorithm 2
806[ 19.544764] md/raid:md3: device sdf3 operational as raid disk 1
807[ 19.545674] md2: detected capacity change from 0 to 26841448448
808[ 19.546461] md/raid:md3: device sdg3 operational as raid disk 3
809[ 19.551305] md/raid:md3: raid level 6 active with 6 out of 6 devices, algorithm 2
810[ 19.552795] md3: detected capacity change from 0 to 4288675840
811[ 19.849607] EXT4-fs (md2): mounted filesystem with ordered data mode. Opts: (null)
812[ 20.529681] systemd-journald[177]: Received SIGTERM from PID 1 (systemd).
813[ 20.751420] systemd: 24 output lines suppressed due to ratelimiting
814[ 20.977065] SELinux: Disabled at runtime.
815[ 21.376199] audit: type=1404 audit(1576075223.717:2): enforcing=0 old_enforcing=0 auid=4294967295 ses=4294967295 enabled=0 old-enabled=1 lsm=selinux res=1
816[ 21.571708] systemd[1]: Inserted module 'ip_tables'
817[ 22.420206] RPC: Registered named UNIX socket transport module.
818[ 22.420207] RPC: Registered udp transport module.
819[ 22.420208] RPC: Registered tcp transport module.
820[ 22.420208] RPC: Registered tcp NFSv4.1 backchannel transport module.
821[ 22.471753] Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
822[ 22.741731] EXT4-fs (md2): re-mounted. Opts: (null)
823[ 22.870545] systemd-journald[777]: Received request to flush runtime journal from PID 1
824[ 22.986752] EDAC MC0: Giving out device to module i7core_edac.c controller i7 core #0: DEV 0000:fe:03.0 (INTERRUPT)
825[ 22.986783] EDAC PCI0: Giving out device to module i7core_edac controller EDAC PCI controller: DEV 0000:fe:03.0 (POLLED)
826[ 22.986810] EDAC i7core: Driver loaded, 1 memory controller(s) found.
827[ 23.522112] ACPI Error: No handler for Region [IPMI] (000000003c37ce13) [IPMI] (20180810/evregion-132)
828[ 23.523443] ACPI Error: Region IPMI (ID=7) has no handler (20180810/exfldio-265)
829[ 23.524757] ACPI Error: Method parse/execution failed \_SB.PMI0._GHL, AE_NOT_EXIST (20180810/psparse-516)
830[ 23.526107] ACPI Error: Method parse/execution failed \_SB.PMI0._PMC, AE_NOT_EXIST (20180810/psparse-516)
831[ 23.527473] ACPI Error: AE_NOT_EXIST, Evaluating _PMC (20180810/power_meter-756)
832[ 23.562790] version 39.2
833[ 23.571240] ipmi device interface
834[ 23.574126] IPMI System Interface driver.
835[ 23.575444] ipmi_si dmi-ipmi-si.0: ipmi_platform: probing via SMBIOS
836[ 23.576771] ipmi_si: SMBIOS: io 0xca8 regsize 1 spacing 4 irq 0
837[ 23.578125] ipmi_si: Adding SMBIOS-specified kcs state machine
838[ 23.579542] ipmi_si: Trying SMBIOS-specified kcs state machine at i/o address 0xca8, slave address 0x20, irq 0
839[ 23.659324] ipmi_si dmi-ipmi-si.0: Found new BMC (man_id: 0x0002a2, prod_id: 0x0100, dev_id: 0x20)
840[ 23.693326] sr 0:0:0:0: Attached scsi generic sg0 type 5
841[ 23.695075] sd 2:0:0:0: Attached scsi generic sg1 type 0
842[ 23.696480] sd 3:0:0:0: Attached scsi generic sg2 type 0
843[ 23.698131] sd 3:0:1:0: Attached scsi generic sg3 type 0
844[ 23.699526] sd 3:0:2:0: Attached scsi generic sg4 type 0
845[ 23.701119] sd 3:0:3:0: Attached scsi generic sg5 type 0
846[ 23.702489] sd 3:0:4:0: Attached scsi generic sg6 type 0
847[ 23.703854] sd 3:0:5:0: Attached scsi generic sg7 type 0
848[ 23.726417] ipmi_si dmi-ipmi-si.0: IPMI kcs interface initialized
849[ 23.893423] input: PC Speaker as /devices/platform/pcspkr/input/input6
850[ 23.941606] cryptd: max_cpu_qlen set to 1000
851[ 23.974946] SSE version of gcm_enc/dec engaged.
852[ 24.010991] alg: No test for pcbc(aes) (pcbc-aes-aesni)
853[ 24.070515] videodev: Linux video capture interface: v2.00
854[ 24.088648] dcdbas dcdbas: Dell Systems Management Base Driver (version 5.6.0-3.2)
855[ 24.092200] md/raid:md7: device sdb4 operational as raid disk 0
856[ 24.094328] md/raid:md7: device sdf4 operational as raid disk 1
857[ 24.096447] md/raid:md7: device sdg4 operational as raid disk 3
858[ 24.098469] md/raid:md7: device sdd4 operational as raid disk 5
859[ 24.100421] md/raid:md7: device sde4 operational as raid disk 2
860[ 24.102289] md/raid:md7: device sdc4 operational as raid disk 4
861[ 24.105733] md/raid:md7: raid level 6 active with 6 out of 6 devices, algorithm 2
862[ 24.154070] md7: detected capacity change from 0 to 3966993694720
863[ 24.190179] gpio_ich: GPIO from 451 to 511 on gpio_ich
864[ 24.191681] iTCO_vendor_support: vendor-support=0
865[ 24.193004] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11
866[ 24.193114] iTCO_wdt: Found a ICH9 TCO device (Version=2, TCOBASE=0x0860)
867[ 24.193487] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
868[ 24.195297] kvm: disabled by bios
869[ 24.506972] Adding 4188156k swap on /dev/md3. Priority:-2 extents:1 across:4188156k FS
870[ 24.508135] kvm: disabled by bios
871[ 24.696073] kvm: disabled by bios
872[ 24.741033] EXT4-fs (md1): mounted filesystem with ordered data mode. Opts: (null)
873[ 24.877345] kvm: disabled by bios
874[ 24.902003] kvm: disabled by bios
875[ 24.931233] kvm: disabled by bios
876[ 24.961466] kvm: disabled by bios
877[ 24.981279] cx23885: cx23885 driver version 0.0.4 loaded
878[ 24.981470] cx23885: CORE cx23885[0]: subsystem: d470:9022, board: TeVii S470 [card=15,autodetected]
879[ 25.116579] cx23885: cx23885_dvb_register() allocating 1 frontend(s)
880[ 25.117871] cx23885: cx23885[0]: cx23885 based dvb card
881[ 25.130121] Invalid probe, probably not a DS3000
882[ 25.131446] cx23885: cx23885[0]: frontend initialization failed
883[ 25.132781] cx23885: cx23885_dvb_register() dvb_register failed err = -22
884[ 25.134121] cx23885: cx23885_dev_setup() Failed to register dvb adapters on VID_B
885[ 25.135445] cx23885: cx23885_dev_checkrevision() Hardware revision = 0xb0
886[ 25.136777] cx23885: cx23885[0]/0: found at 0000:06:00.0, rev: 2, irq: 37, latency: 0, mmio: 0xdf000000
887[ 25.138327] kvm: disabled by bios
888[ 25.334888] EXT4-fs (md7): mounted filesystem with ordered data mode. Opts: (null)
889[ 26.968150] bnx2 0000:01:00.0 eth0: using MSIX
890[ 26.968818] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
891[ 28.592738] bnx2 0000:01:00.0 eth0: NIC Copper Link is Up, 100 Mbps full duplex
892[ 28.593765] , receive & transmit flow control ON
893[ 28.594887] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
894[ 40.176555] bnx2 0000:02:00.1 eth3: using MSIX
895[ 40.176739] IPv6: ADDRCONF(NETDEV_UP): eth3: link is not ready
896[ 42.904674] bnx2 0000:02:00.1 eth3: NIC Copper Link is Up, 1000 Mbps full duplex
897[ 42.904729] , receive & transmit flow control ON
898[ 42.904846] IPv6: ADDRCONF(NETDEV_CHANGE): eth3: link becomes ready
899[ 52.316171] tun: Universal TUN/TAP device driver, 1.6
900[ 136.507383] nf_conntrack: default automatic helper assignment has been turned off for security reasons and CT-based firewall rule not found. Use the iptables CT target to attach helpers instead.
901[ 595.067647] videodev: Linux video capture interface: v2.00
902[ 595.090114] cx23885: cx23885 driver version 0.0.4 loaded
903[ 595.090355] cx23885: CORE cx23885[0]: subsystem: d470:9022, board: TeVii S470 [card=15,autodetected]
904[ 595.221974] cx23885: cx23885_dvb_register() allocating 1 frontend(s)
905[ 595.222017] cx23885: cx23885[0]: cx23885 based dvb card
906[ 595.222337] Invalid probe, probably not a DS3000
907[ 595.222378] cx23885: cx23885[0]: frontend initialization failed
908[ 595.222415] cx23885: cx23885_dvb_register() dvb_register failed err = -22
909[ 595.222455] cx23885: cx23885_dev_setup() Failed to register dvb adapters on VID_B
910[ 595.222512] cx23885: cx23885_dev_checkrevision() Hardware revision = 0xb0
911[ 595.222558] cx23885: cx23885[0]/0: found at 0000:06:00.0, rev: 2, irq: 37, latency: 0, mmio: 0xdf000000
912[ 834.934770] perf: interrupt took too long (2514 > 2500), lowering kernel.perf_event_max_sample_rate to 79000
913[ 877.930121] perf: interrupt took too long (3148 > 3142), lowering kernel.perf_event_max_sample_rate to 63000
914[ 982.995102] perf: interrupt took too long (3936 > 3935), lowering kernel.perf_event_max_sample_rate to 50000
915[ 1195.457374] videodev: Linux video capture interface: v2.00
916[ 1195.477733] cx23885: cx23885 driver version 0.0.4 loaded
917[ 1195.477971] cx23885: CORE cx23885[0]: subsystem: d470:9022, board: TeVii S470 [card=15,autodetected]
918[ 1195.614183] cx23885: cx23885_dvb_register() allocating 1 frontend(s)
919[ 1195.614227] cx23885: cx23885[0]: cx23885 based dvb card
920[ 1195.614547] Invalid probe, probably not a DS3000
921[ 1195.614598] cx23885: cx23885[0]: frontend initialization failed
922[ 1195.614637] cx23885: cx23885_dvb_register() dvb_register failed err = -22
923[ 1195.614677] cx23885: cx23885_dev_setup() Failed to register dvb adapters on VID_B
924[ 1195.614723] cx23885: cx23885_dev_checkrevision() Hardware revision = 0xb0
925[ 1195.614768] cx23885: cx23885[0]/0: found at 0000:06:00.0, rev: 2, irq: 37, latency: 0, mmio: 0xdf000000
926[ 1793.678101] videodev: Linux video capture interface: v2.00
927[ 1793.698559] cx23885: cx23885 driver version 0.0.4 loaded
928[ 1793.698794] cx23885: CORE cx23885[0]: subsystem: d470:9022, board: TeVii S470 [card=15,autodetected]
929[ 1793.836348] cx23885: cx23885_dvb_register() allocating 1 frontend(s)
930[ 1793.836391] cx23885: cx23885[0]: cx23885 based dvb card
931[ 1793.836712] Invalid probe, probably not a DS3000
932[ 1793.836753] cx23885: cx23885[0]: frontend initialization failed
933[ 1793.836789] cx23885: cx23885_dvb_register() dvb_register failed err = -22
934[ 1793.836830] cx23885: cx23885_dev_setup() Failed to register dvb adapters on VID_B
935[ 1793.836876] cx23885: cx23885_dev_checkrevision() Hardware revision = 0xb0
936[ 1793.836921] cx23885: cx23885[0]/0: found at 0000:06:00.0, rev: 2, irq: 37, latency: 0, mmio: 0xdf000000
937[ 2394.179035] videodev: Linux video capture interface: v2.00
938[ 2394.201003] cx23885: cx23885 driver version 0.0.4 loaded
939[ 2394.202735] cx23885: CORE cx23885[0]: subsystem: d470:9022, board: TeVii S470 [card=15,autodetected]
940[ 2394.338148] cx23885: cx23885_dvb_register() allocating 1 frontend(s)
941[ 2394.339758] cx23885: cx23885[0]: cx23885 based dvb card
942[ 2394.341643] Invalid probe, probably not a DS3000
943[ 2394.343226] cx23885: cx23885[0]: frontend initialization failed
944[ 2394.344756] cx23885: cx23885_dvb_register() dvb_register failed err = -22
945[ 2394.346333] cx23885: cx23885_dev_setup() Failed to register dvb adapters on VID_B
946[ 2394.347915] cx23885: cx23885_dev_checkrevision() Hardware revision = 0xb0
947[ 2394.349460] cx23885: cx23885[0]/0: found at 0000:06:00.0, rev: 2, irq: 37, latency: 0, mmio: 0xdf000000
948[ 2993.751810] videodev: Linux video capture interface: v2.00
949[ 2993.773642] cx23885: cx23885 driver version 0.0.4 loaded
950[ 2993.775331] cx23885: CORE cx23885[0]: subsystem: d470:9022, board: TeVii S470 [card=15,autodetected]
951[ 2993.911951] cx23885: cx23885_dvb_register() allocating 1 frontend(s)
952[ 2993.911954] cx23885: cx23885[0]: cx23885 based dvb card
953[ 2993.912263] Invalid probe, probably not a DS3000
954[ 2993.912275] cx23885: cx23885[0]: frontend initialization failed
955[ 2993.912276] cx23885: cx23885_dvb_register() dvb_register failed err = -22
956[ 2993.912277] cx23885: cx23885_dev_setup() Failed to register dvb adapters on VID_B
957[ 2993.912279] cx23885: cx23885_dev_checkrevision() Hardware revision = 0xb0
958[ 2993.912292] cx23885: cx23885[0]/0: found at 0000:06:00.0, rev: 2, irq: 37, latency: 0, mmio: 0xdf000000
959[ 3593.921979] videodev: Linux video capture interface: v2.00
960[ 3593.943883] cx23885: cx23885 driver version 0.0.4 loaded
961[ 3593.945575] cx23885: CORE cx23885[0]: subsystem: d470:9022, board: TeVii S470 [card=15,autodetected]
962[ 3594.077298] cx23885: cx23885_dvb_register() allocating 1 frontend(s)
963[ 3594.078859] cx23885: cx23885[0]: cx23885 based dvb card
964[ 3594.080649] Invalid probe, probably not a DS3000
965[ 3594.082200] cx23885: cx23885[0]: frontend initialization failed
966[ 3594.083714] cx23885: cx23885_dvb_register() dvb_register failed err = -22
967[ 3594.085202] cx23885: cx23885_dev_setup() Failed to register dvb adapters on VID_B
968[ 3594.086724] cx23885: cx23885_dev_checkrevision() Hardware revision = 0xb0
969[ 3594.088261] cx23885: cx23885[0]/0: found at 0000:06:00.0, rev: 2, irq: 37, latency: 0, mmio: 0xdf000000
970[ 4194.290630] videodev: Linux video capture interface: v2.00
971[ 4194.312598] cx23885: cx23885 driver version 0.0.4 loaded
972[ 4194.314361] cx23885: CORE cx23885[0]: subsystem: d470:9022, board: TeVii S470 [card=15,autodetected]
973[ 4194.454654] cx23885: cx23885_dvb_register() allocating 1 frontend(s)
974[ 4194.454656] cx23885: cx23885[0]: cx23885 based dvb card
975[ 4194.454952] Invalid probe, probably not a DS3000
976[ 4194.459318] cx23885: cx23885[0]: frontend initialization failed
977[ 4194.460846] cx23885: cx23885_dvb_register() dvb_register failed err = -22
978[ 4194.462328] cx23885: cx23885_dev_setup() Failed to register dvb adapters on VID_B
979[ 4194.463819] cx23885: cx23885_dev_checkrevision() Hardware revision = 0xb0
980[ 4194.465363] cx23885: cx23885[0]/0: found at 0000:06:00.0, rev: 2, irq: 37, latency: 0, mmio: 0xdf000000
981[ 4793.627423] videodev: Linux video capture interface: v2.00
982[ 4793.649906] cx23885: cx23885 driver version 0.0.4 loaded
983[ 4793.651686] cx23885: CORE cx23885[0]: subsystem: d470:9022, board: TeVii S470 [card=15,autodetected]
984[ 4793.786053] cx23885: cx23885_dvb_register() allocating 1 frontend(s)
985[ 4793.787647] cx23885: cx23885[0]: cx23885 based dvb card
986[ 4793.789462] Invalid probe, probably not a DS3000
987[ 4793.791067] cx23885: cx23885[0]: frontend initialization failed
988[ 4793.792593] cx23885: cx23885_dvb_register() dvb_register failed err = -22
989[ 4793.794172] cx23885: cx23885_dev_setup() Failed to register dvb adapters on VID_B
990[ 4793.795712] cx23885: cx23885_dev_checkrevision() Hardware revision = 0xb0
991[ 4793.797277] cx23885: cx23885[0]/0: found at 0000:06:00.0, rev: 2, irq: 37, latency: 0, mmio: 0xdf000000
992[ 5393.814731] videodev: Linux video capture interface: v2.00
993[ 5393.836994] cx23885: cx23885 driver version 0.0.4 loaded
994[ 5393.838733] cx23885: CORE cx23885[0]: subsystem: d470:9022, board: TeVii S470 [card=15,autodetected]
995[ 5393.976339] cx23885: cx23885_dvb_register() allocating 1 frontend(s)
996[ 5393.977858] cx23885: cx23885[0]: cx23885 based dvb card
997[ 5393.979712] Invalid probe, probably not a DS3000
998[ 5393.981221] cx23885: cx23885[0]: frontend initialization failed
999[ 5393.982775] cx23885: cx23885_dvb_register() dvb_register failed err = -22
1000[ 5393.984320] cx23885: cx23885_dev_setup() Failed to register dvb adapters on VID_B
1001[ 5393.985820] cx23885: cx23885_dev_checkrevision() Hardware revision = 0xb0
1002[ 5393.987414] cx23885: cx23885[0]/0: found at 0000:06:00.0, rev: 2, irq: 37, latency: 0, mmio: 0xdf000000
1003[ 5994.212056] videodev: Linux video capture interface: v2.00
1004[ 5994.234108] cx23885: cx23885 driver version 0.0.4 loaded
1005[ 5994.235869] cx23885: CORE cx23885[0]: subsystem: d470:9022, board: TeVii S470 [card=15,autodetected]
1006[ 5994.369812] cx23885: cx23885_dvb_register() allocating 1 frontend(s)
1007[ 5994.369814] cx23885: cx23885[0]: cx23885 based dvb card
1008[ 5994.370131] Invalid probe, probably not a DS3000
1009[ 5994.370144] cx23885: cx23885[0]: frontend initialization failed
1010[ 5994.370145] cx23885: cx23885_dvb_register() dvb_register failed err = -22
1011[ 5994.370146] cx23885: cx23885_dev_setup() Failed to register dvb adapters on VID_B
1012[ 5994.370148] cx23885: cx23885_dev_checkrevision() Hardware revision = 0xb0
1013[ 5994.370153] cx23885: cx23885[0]/0: found at 0000:06:00.0, rev: 2, irq: 37, latency: 0, mmio: 0xdf000000