· 6 years ago · Mar 23, 2020, 07:02 AM
1Format: Log Type - Time(microsec) - Message - Optional Info
2Log Type: B - Since Boot(Power On Reset), D - Delta, S - Statistic
3S - QC_IMAGE_VERSION_STRING=BOOT.BF.3.1.1-00096
4S - IMAGE_VARIANT_STRING=DAABANAZA
5S - OEM_IMAGE_VERSION_STRING=CRM
6S - Boot Config, 0x00000021
7S - Core 0 Frequency, 0 MHz
8B - 261 - PBL, Start
9B - 1339 - bootable_media_detect_entry, Start
10B - 1679 - bootable_media_detect_success, Start
11B - 1693 - elf_loader_entry, Start
12B - 5072 - auth_hash_seg_entry, Start
13B - 7217 - auth_hash_seg_exit, Start
14B - 572774 - elf_segs_hash_verify_entry, Start
15B - 688230 - PBL, End
16B - 688255 - SBL1, Start
17B - 776608 - pm_device_init, Start
18D - 6 - pm_device_init, Delta
19B - 778121 - boot_flash_init, Start
20D - 62929 - boot_flash_init, Delta
21B - 845241 - boot_config_data_table_init, Start
22D - 3845 - boot_config_data_table_init, Delta - (419 Bytes)
23B - 852464 - clock_init, Start
24D - 7578 - clock_init, Delta
25B - 864563 - CDT version:2,Platform ID:8,Major ID:1,Minor ID:0,Subtype:0
26B - 868053 - sbl1_ddr_set_params, Start
27B - 873040 - cpr_init, Start
28D - 2 - cpr_init, Delta
29B - 877532 - Pre_DDR_clock_init, Start
30D - 4 - Pre_DDR_clock_init, Delta
31D - 13148 - sbl1_ddr_set_params, Delta
32B - 891235 - pm_driver_init, Start
33D - 2 - pm_driver_init, Delta
34B - 961233 - sbl1_wait_for_ddr_training, Start
35D - 29 - sbl1_wait_for_ddr_training, Delta
36B - 976839 - Image Load, Start
37D - 134954 - QSEE Image Loaded, Delta - (262104 Bytes)
38B - 1112289 - Image Load, Start
39D - 1446 - SEC Image Loaded, Delta - (2048 Bytes)
40B - 1122661 - Image Load, Start
41D - 216080 - APPSBL Image Loaded, Delta - (442267 Bytes)
42B - 1339163 - QSEE Execution, Start
43D - 58 - QSEE Execution, Delta
44B - 1345339 - SBL1, End
45D - 659194 - SBL1, Delta
46S - Flash Throughput, 2006 KB/s (706838 Bytes, 352341 us)
47S - DDR Frequency, 537 MHz
48
49
50U-Boot 2012.07-BCBC0020-uboot_version:V1.0.1 [Attitude Adjustment 12.09.1,3ca8b22] (Dec 20 2019 - 10:52:36)
51
52smem ram ptable found: ver: 1 len: 3
53DRAM: 256 MiB
54machid : 0x8010000
55SENAO LED INIT!
56led state: 0x1
57NAND: 0 MiB
58FLASH: SF: Use the 4 byte mode
59SF: Detected W25Q256 with block size 64 KiB, total 32 MiB
60
61ipq_spi: page_size: 0x100, sector_size: 0x10000, size: 0x2000000
6232 MB
63MMC:
64In: serial
65Out: serial
66Err: serial
67Net: no ethernet defined!
68No ethernet found.
69
70Please choose the operation:
71 2: Load Linux System code then write to Flash via USB.
72 4: Entr boot command line interface.
73 9: Load Boot Loader code then write to Flash via USB.
74 a: Load Linux System code then write to Flash via USB Ethernet.
75 b: Load Boot Loader code then write to Flash via USB Ethernet.
76 e: Erase Boot Loader ENV config.
77 0
78MMC Device 0 not found
79find_part_efi: Invalid Argument(s)
80bootargs=console=ttyMSM0,115200n8 Boot Loader ENV config. rootwait
81Booting from flash
82Using nor device
83sf probe &&sf read 0x84000000 0x200000 0x400000 &&
84SF: Use the 4 byte mode
85SF: Detected W25Q256 with block size 64 KiB, total 32 MiB
86
87bootm 0x84000000#config@4
88## Booting kernel from FIT Image at 84000000 ...
89 Using 'config@4' configuration
90 Trying 'kernel@1' kernel subimage
91 Description: ARM OpenWrt Linux-4.19.88
92 Type: Kernel Image
93 Compression: gzip compressed
94 Data Start: 0x840000e4
95 Data Size: 3258853 Bytes = 3.1 MiB
96 Architecture: ARM
97 OS: Linux
98 Load Address: 0x80208000
99 Entry Point: 0x80208000
100 Hash algo: crc32
101 Hash value: b79bcad5
102 Hash algo: sha1
103 Hash value: 61fef85b8cba97dc8ba7ceda68d188f843364a53
104 Verifying Hash Integrity ... crc32+ sha1+ OK
105## Flattened Device Tree from FIT Image at 84000000
106 Using 'config@4' configuration
107 Trying 'fdt@1' FDT blob subimage
108 Description: ARM OpenWrt counst_bcbc0020 device tree blob
109 Type: Flat Device Tree
110 Compression: uncompressed
111 Data Start: 0x8431bc08
112 Data Size: 15412 Bytes = 15.1 KiB
113 Architecture: ARM
114 Hash algo: crc32
115 Hash value: b4cee37c
116 Hash algo: sha1
117 Hash value: 1d996ba077e3a155c21c167812b09d93ae4711e4
118 Verifying Hash Integrity ... crc32+ sha1+ OK
119 Booting using the fdt blob at 0x8431bc08
120 Uncompressing Kernel Image ... OK
121 Loading Device Tree to 86ff9000, end 86fffc33 ... OK
122ipq: fdt fixup unable to find compatible node
123eth0 MAC Address from ART is not valid
124eth1 MAC Address from ART is not valid
125Using machid 0x8010000 from environment
126
127Starting kernel ...
128
129[ 0.000000] Booting Linux on physical CPU 0x0
130[ 0.000000] Linux version 4.19.88 (root@frank-Ubuntu-pc) (gcc version 8.3.0 (OpenWrt GCC 8.3.0 r11692+2-922b538)) #0 SMP Thu Dec 19 01:35:11 2019
131[ 0.000000] CPU: ARMv7 Processor [410fc075] revision 5 (ARMv7), cr=10c5387d
132[ 0.000000] CPU: div instructions available: patching division code
133[ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
134[ 0.000000] OF: fdt: Machine model: Counst BCBC0020
135[ 0.000000] Memory policy: Data cache writealloc
136[ 0.000000] random: get_random_bytes called from start_kernel+0x7c/0x434 with crng_init=0
137[ 0.000000] percpu: Embedded 15 pages/cpu s29964 r8192 d23284 u61440
138[ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 64448
139[ 0.000000] Kernel command line: console=ttyMSM0,115200n8 Boot Loader ENV config. rootwait
140[ 0.000000] Dentry cache hash table entries: 32768 (order: 5, 131072 bytes)
141[ 0.000000] Inode-cache hash table entries: 16384 (order: 4, 65536 bytes)
142[ 0.000000] Memory: 248660K/260096K available (4734K kernel code, 168K rwdata, 1292K rodata, 1024K init, 230K bss, 11436K reserved, 0K cma-reserved, 0K highmem)
143[ 0.000000] Virtual kernel memory layout:
144[ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB)
145[ 0.000000] fixmap : 0xffc00000 - 0xfff00000 (3072 kB)
146[ 0.000000] vmalloc : 0xd0800000 - 0xff800000 ( 752 MB)
147[ 0.000000] lowmem : 0xc0000000 - 0xd0000000 ( 256 MB)
148[ 0.000000] pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB)
149[ 0.000000] modules : 0xbf000000 - 0xbfe00000 ( 14 MB)
150[ 0.000000] .text : 0x(ptrval) - 0x(ptrval) (5727 kB)
151[ 0.000000] .init : 0x(ptrval) - 0x(ptrval) (1024 kB)
152[ 0.000000] .data : 0x(ptrval) - 0x(ptrval) ( 168 kB)
153[ 0.000000] .bss : 0x(ptrval) - 0x(ptrval) ( 231 kB)
154[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
155[ 0.000000] rcu: Hierarchical RCU implementation.
156[ 0.000000] NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16
157[ 0.000000] arch_timer: cp15 timer(s) running at 48.00MHz (virt).
158[ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0xb11fd3bfb, max_idle_ns: 440795203732 ns
159[ 0.000008] sched_clock: 56 bits at 48MHz, resolution 20ns, wraps every 4398046511096ns
160[ 0.000022] Switching to timer-based delay loop, resolution 20ns
161[ 0.000237] Calibrating delay loop (skipped), value calculated using timer frequency.. 96.00 BogoMIPS (lpj=480000)
162[ 0.000257] pid_max: default: 32768 minimum: 301
163[ 0.000433] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)
164[ 0.000451] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes)
165[ 0.001372] CPU: Testing write buffer coherency: ok
166[ 0.002364] Setting up static identity map for 0x80300000 - 0x80300060
167[ 0.002528] rcu: Hierarchical SRCU implementation.
168[ 0.003253] smp: Bringing up secondary CPUs ...
169[ 0.006296] smp: Brought up 1 node, 4 CPUs
170[ 0.006315] SMP: Total of 4 processors activated (384.00 BogoMIPS).
171[ 0.006323] CPU: All CPU(s) started in SVC mode.
172[ 0.010488] VFP support v0.3: implementor 41 architecture 2 part 30 variant 7 rev 5
173[ 0.010651] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
174[ 0.010676] futex hash table entries: 1024 (order: 4, 65536 bytes)
175[ 0.010952] pinctrl core: initialized pinctrl subsystem
176[ 0.011971] NET: Registered protocol family 16
177[ 0.012322] DMA: preallocated 256 KiB pool for atomic coherent allocations
178[ 0.013478] cpuidle: using governor ladder
179[ 0.013527] cpuidle: using governor menu
180[ 0.029026] usbcore: registered new interface driver usbfs
181[ 0.029092] usbcore: registered new interface driver hub
182[ 0.029176] usbcore: registered new device driver usb
183[ 0.029225] pps_core: LinuxPPS API ver. 1 registered
184[ 0.029235] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
185[ 0.029259] PTP clock support registered
186[ 0.030756] clocksource: Switched to clocksource arch_sys_counter
187[ 0.031714] NET: Registered protocol family 2
188[ 0.032342] tcp_listen_portaddr_hash hash table entries: 512 (order: 0, 6144 bytes)
189[ 0.032380] TCP established hash table entries: 2048 (order: 1, 8192 bytes)
190[ 0.032417] TCP bind hash table entries: 2048 (order: 2, 16384 bytes)
191[ 0.032465] TCP: Hash tables configured (established 2048 bind 2048)
192[ 0.032575] UDP hash table entries: 256 (order: 1, 8192 bytes)
193[ 0.032613] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes)
194[ 0.032841] NET: Registered protocol family 1
195[ 0.034016] No memory allocated for crashlog
196[ 0.034245] workingset: timestamp_bits=14 max_order=16 bucket_order=2
197[ 0.039114] squashfs: version 4.0 (2009/01/31) Phillip Lougher
198[ 0.039131] jffs2: version 2.2 (NAND) (SUMMARY) (LZMA) (RTIME) (CMODE_PRIORITY) (c) 2001-2006 Red Hat, Inc.
199[ 0.044906] io scheduler noop registered
200[ 0.044927] io scheduler deadline registered (default)
201[ 0.047574] bam-dma-engine 8e04000.dma: num-channels unspecified in dt
202[ 0.047592] bam-dma-engine 8e04000.dma: num-ees unspecified in dt
203[ 0.048259] tcsr 1949000.tcsr: setting wifi_glb_cfg = 41000000
204[ 0.048343] tcsr 1957000.tcsr: setting wifi_noc_memtype_m0_m2 = 2222222
205[ 0.048570] Serial: 8250/16550 driver, 2 ports, IRQ sharing disabled
206[ 0.049131] msm_serial 78af000.serial: msm_serial: detected port #0
207[ 0.049185] msm_serial 78af000.serial: uartclk = 1843200
208[ 0.049236] 78af000.serial: ttyMSM0 at MMIO 0x78af000 (irq = 25, base_baud = 115200) is a MSM
209[ 0.049266] msm_serial: console setup on port #0
210[ 0.549192] console [ttyMSM0] enabled
211[ 0.554113] msm_serial: driver initialized
212[ 0.562157] loop: module loaded
213[ 0.563282] spi_qup 78b5000.spi: IN:block:16, fifo:64, OUT:block:16, fifo:64
214[ 0.571220] random: fast init done
215[ 0.574273] m25p80 spi0.0: w25q256 (32768 Kbytes)
216[ 0.575004] 10 fixed-partitions partitions found on MTD device spi0.0
217[ 0.579728] Creating 10 MTD partitions on "spi0.0":
218[ 0.586177] 0x000000000000-0x000000040000 : "0:SBL1"
219[ 0.591632] 0x000000040000-0x000000060000 : "0:MIBIB"
220[ 0.596687] 0x000000060000-0x0000000c0000 : "0:QSEE"
221[ 0.601654] 0x0000000c0000-0x0000000d0000 : "0:CDT"
222[ 0.606675] 0x0000000d0000-0x0000000e0000 : "0:DDRPARAMS"
223[ 0.611312] 0x0000000e0000-0x0000000f0000 : "0:APPSBLENV"
224[ 0.616844] 0x0000000f0000-0x000000170000 : "0:APPSBL"
225[ 0.622242] 0x000000170000-0x000000180000 : "0:ART"
226[ 0.627232] 0x000000180000-0x000000200000 : "userconfig"
227[ 0.632018] 0x000000200000-0x000002000000 : "firmware"
228[ 0.638027] 2 fit-fw partitions found on MTD device firmware
229[ 0.641913] Creating 2 MTD partitions on "firmware":
230[ 0.647711] 0x000000000000-0x000000320000 : "kernel"
231[ 0.653428] 0x00000031fd6c-0x000001e00000 : "rootfs"
232[ 0.658184] mtd: device 11 (rootfs) set to be root filesystem
233[ 0.662830] 1 squashfs-split partitions found on MTD device rootfs
234[ 0.668188] 0x000000790000-0x000001e00000 : "rootfs_data"
235[ 0.675597] libphy: ipq40xx_mdio: probed
236[ 0.683870] libphy: Fixed MDIO Bus: probed
237[ 0.684023] i2c /dev entries driver
238[ 0.693021] NET: Registered protocol family 10
239[ 0.694269] Segment Routing with IPv6
240[ 0.696446] NET: Registered protocol family 17
241[ 0.700326] 8021q: 802.1Q VLAN Support v1.8
242[ 0.704577] Registering SWP/SWPB emulation handler
243[ 0.714574�[ 0.721556] VFS: Mounted root (squashfs filesystem) readonly on device 31:11.
244[ 0.723560] Freeing unused kernel memory: 1024K
245[ 0.754260] Run /sbin/init as init process
246[ 1.818682] init: Console is alive
247[ 1.818910] init: - watchdog -
248[ 4.131508] kmodloader: loading kernel modules from /etc/modules-boot.d/*
249[ 4.189296] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
250[ 4.193837] SCSI subsystem initialized
251[ 4.197297] ehci-platform: EHCI generic platform driver
252[ 4.203011] dwc3 6000000.dwc3: Failed to get clk 'ref': -2
253[ 4.343949] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller
254[ 4.344014] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 1
255[ 4.348561] xhci-hcd xhci-hcd.0.auto: hcc params 0x0220f665 hci version 0x100 quirks 0x0000000002010010
256[ 4.355998] xhci-hcd xhci-hcd.0.auto: irq 61, io mem 0x06000000
257[ 4.366149] hub 1-0:1.0: USB hub found
258[ 4.371259] hub 1-0:1.0: 1 port detected
259[ 4.375336] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller
260[ 4.379074] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 2
261[ 4.384427] xhci-hcd xhci-hcd.0.auto: Host supports USB 3.0 SuperSpeed
262[ 4.392087] usb usb2: We don't know the algorithms for LPM for this host, disabling LPM.
263[ 4.399057] hub 2-0:1.0: USB hub found
264[ 4.406840] hub 2-0:1.0: config failed, hub doesn't have any ports! (err -19)
265[ 4.414114] usbcore: registered new interface driver usb-storage
266[ 4.417702] kmodloader: done loading kernel modules from /etc/modules-boot.d/*
267[ 4.431359] init: - preinit -
268[ 4.741006] usb 1-1: new high-speed USB device number 2 using xhci-hcd
269[ 5.105775] random: procd: uninitialized urandom read (4 bytes read)
270[ 5.628093] random: jshn: uninitialized urandom read (4 bytes read)
271[ 5.657761] random: jshn: uninitialized urandom read (4 bytes read)
272/bin/board_detect: line 10: Unsupported: not found
273Press the [f] key and hit [enter] to enter failsafe mode
274Press the [1], [2], [3] or [4] key and hit [enter] to select the debug level
275[ 9.077090] mount_root: loading kmods from internal overlay
276[ 9.092603] kmodloader: loading kernel modules from //etc/modules-boot.d/*
277[ 9.093849] kmodloader: done loading kernel modules from //etc/modules-boot.d/*
278[ 9.566991] random: crng init done
279[ 9.567062] random: 6 urandom warning(s) missed due to ratelimiting
280[ 11.040422] jffs2: notice: (172) jffs2_build_xattr_subsystem: complete building xattr subsystem, 9 of xdatum (0 unchecked, 9 orphan) and 52 of xref (3 dead, 49 orphan) found.
281[ 11.042275] block: attempting to load /tmp/jffs_cfg/upper/etc/config/fstab
282[ 11.055257] block: unable to load configuration (fstab: Entry not found)
283[ 11.061866] block: attempting to load /tmp/jffs_cfg/etc/config/fstab
284[ 11.068696] block: unable to load configuration (fstab: Entry not found)
285[ 11.075075] block: attempting to load /etc/config/fstab
286[ 11.081798] block: unable to load configuration (fstab: Entry not found)
287[ 11.086612] block: no usable configuration
288[ 11.368195] jffs2: notice: (170) jffs2_build_xattr_subsystem: complete building xattr subsystem, 9 of xdatum (0 unchecked, 9 orphan) and 52 of xref (3 dead, 49 orphan) found.
289[ 12.662836] block: attempting to load /tmp/jffs_cfg/upper/etc/config/fstab
290[ 12.662985] block: unable to load configuration (fstab: Entry not found)
291[ 12.668669] block: attempting to load /tmp/jffs_cfg/etc/config/fstab
292[ 12.675706] block: unable to load configuration (fstab: Entry not found)
293[ 12.682003] block: attempting to load /etc/config/fstab
294[ 12.688585] block: unable to load configuration (fstab: Entry not found)
295[ 12.693566] block: no usable configuration
296[ 12.754534] mount_root: overlay filesystem has not been fully initialized yet
297[ 12.757551] mount_root: switching to jffs2 overlay
298[ 12.793120] overlayfs: upper fs does not support tmpfile.
299[ 12.798009] urandom-seed: Seed file not found (/etc/urandom.seed)
300[ 12.862165] procd: - early -
301[ 12.862305] procd: - watchdog -
302[ 13.578760] procd: - watchdog -
303[ 13.579068] procd: - ubus -
304[ 13.754809] procd: - init -
305Please press Enter to activate this console.
306[ 14.108642] kmodloader: loading kernel modules from /etc/modules.d/*
307[ 14.163614] Loading modules backported from Linux version v5.4-rc8-0-gaf42d3466bdc
308[ 14.163650] Backport generated by backports.git v5.4-rc8-1-0-g368e8c51
309[ 14.174701] urngd: v1.0.1 started.
310[ 14.186956] xt_time: kernel timezone is -0000
311[ 14.714228] asix 1-1:1.0 eth0: register 'asix' at usb-xhci-hcd.0.auto-1, ASIX AX88772 USB 2.0 Ethernet, 34:76:c5:cb:c7:b0
312[ 14.714690] usbcore: registered new interface driver asix
313[ 14.726079] usbcore: registered new interface driver ax88179_178a
314[ 14.782059] PPP generic driver version 2.4.2
315[ 14.783268] NET: Registered protocol family 24
316[ 15.022835] firmware ath10k!fwcfg-ahb-a000000.wifi.txt: firmware_loading_store: map pages failed
317[ 15.488797] firmware ath10k!QCA4019!hw1.0!ct-firmware-5.bin: firmware_loading_store: map pages failed
318[ 15.601861] firmware ath10k!QCA4019!hw1.0!ct-firmware-2.bin: firmware_loading_store: map pages failed
319[ 15.702696] firmware ath10k!QCA4019!hw1.0!firmware-6.bin: firmware_loading_store: map pages failed
320[ 16.341919] ath10k_ahb a000000.wifi: qca4019 hw1.0 target 0x01000000 chip_id 0x003b00ff sub 0000:0000
321[ 16.341963] ath10k_ahb a000000.wifi: kconfig debug 0 debugfs 1 tracing 0 dfs 1 testmode 0
322[ 16.354240] ath10k_ahb a000000.wifi: firmware ver 10.4b-ct-4019-fW-012-17ba98334 api 5 features mfp,peer-flow-ctrl,txstatus-noack,wmi-10.x-CT,ratemask-CT,regdump-CT,txrate-CT,flush-all-CT,pingpong-CT,ch-regs-CT,nop-CT,set-special-CT,tx-rc-CT,cust-stats-CT,txrate2-CT,beacon-cb-CT,wmi-block-ack-CT,wmi-bcn-rc-CT crc32 8f2e0e09
323[ 16.406370] ath10k_ahb a000000.wifi: board_file api 2 bmi_id 0:16 crc32 e1875298
324[ 17.716305] ath10k_ahb a000000.wifi: 10.4 wmi init: vdevs: 16 peers: 48 tid: 96
325[ 17.716347] ath10k_ahb a000000.wifi: msdu-desc: 2500 skid: 32
326[ 17.763027] ath10k_ahb a000000.wifi: wmi print 'P 48/48 V 16 K 144 PH 176 T 186 msdu-desc: 2500 sw-crypt: 0 ct-sta: 0'
327[ 17.763975] ath10k_ahb a000000.wifi: wmi print 'free: 56528 iram: 23400 sram: 32520'
328[ 17.886330] ath10k_ahb a000000.wifi: htt-ver 2.2 wmi-op 6 htt-op 4 cal pre-cal-file max-sta 32 raw 0 hwcrypto 1
329[ 19.080293] firmware ath10k!fwcfg-ahb-a800000.wifi.txt: firmware_loading_store: map pages failed
330[ 19.502675] firmware ath10k!QCA4019!hw1.0!ct-firmware-5.bin: firmware_loading_store: map pages failed
331[ 19.627551] firmware ath10k!QCA4019!hw1.0!ct-firmware-2.bin: firmware_loading_store: map pages failed
332[ 19.726331] firmware ath10k!QCA4019!hw1.0!firmware-6.bin: firmware_loading_store: map pages failed
333[ 19.726647] ath10k_ahb a800000.wifi: qca4019 hw1.0 target 0x01000000 chip_id 0x003b00ff sub 0000:0000
334[ 19.734285] ath10k_ahb a800000.wifi: kconfig debug 0 debugfs 1 tracing 0 dfs 1 testmode 0
335[ 19.748137] ath10k_ahb a800000.wifi: firmware ver 10.4b-ct-4019-fW-012-17ba98334 api 5 features mfp,peer-flow-ctrl,txstatus-noack,wmi-10.x-CT,ratemask-CT,regdump-CT,txrate-CT,flush-all-CT,pingpong-CT,ch-regs-CT,nop-CT,set-special-CT,tx-rc-CT,cust-stats-CT,txrate2-CT,beacon-cb-CT,wmi-block-ack-CT,wmi-bcn-rc-CT crc32 8f2e0e09
336[ 19.799322] ath10k_ahb a800000.wifi: board_file api 2 bmi_id 0:17 crc32 e1875298
337[ 21.110263] ath10k_ahb a800000.wifi: 10.4 wmi init: vdevs: 16 peers: 48 tid: 96
338[ 21.110311] ath10k_ahb a800000.wifi: msdu-desc: 2500 skid: 32
339[ 21.157400] ath10k_ahb a800000.wifi: wmi print 'P 48/48 V 16 K 144 PH 176 T 186 msdu-desc: 2500 sw-crypt: 0 ct-sta: 0'
340[ 21.158354] ath10k_ahb a800000.wifi: wmi print 'free: 56528 iram: 23400 sram: 32520'
341[ 21.276306] ath10k_ahb a800000.wifi: htt-ver 2.2 wmi-op 6 htt-op 4 cal pre-cal-file max-sta 32 raw 0 hwcrypto 1
342[ 21.475289] kmodloader: done loading kernel modules from /etc/modules.d/*
343[ 33.670163] br-lan: port 1(eth0) entered blocking state
344[ 33.670212] br-lan: port 1(eth0) entered disabled state
345[ 33.675017] device eth0 entered promiscuous mode
346[ 33.684942] IPv6: ADDRCONF(NETDEV_UP): br-lan: link is not ready
347[ 33.838450] asix 1-1:1.0 eth0: link up, 100Mbps, full-duplex, lpa 0xCDE1
348[ 33.848539] br-lan: port 1(eth0) entered blocking state
349[ 33.848601] br-lan: port 1(eth0) entered forwarding state
350[ 33.855427] IPv6: ADDRCONF(NETDEV_CHANGE): br-lan: link becomes ready
351
352
353
354BusyBox v1.31.1 () built-in shell (ash)
355
356 _______ ________ __
357 | |.-----.-----.-----.| | | |.----.| |_
358 | - || _ | -__| || | | || _|| _|
359 |_______|| __|_____|__|__||________||__| |____|
360 |__| W I R E L E S S F R E E D O M
361 -----------------------------------------------------
362 OpenWrt SNAPSHOT, r11692+2-922b538
363 -----------------------------------------------------
364=== WARNING! =====================================
365There is no root password defined on this device!
366Use the "passwd" command to set up a new password
367in order to prevent unauthorized SSH logins.
368--------------------------------------------------
369root@OpenWrt:/#
370root@OpenWrt:/# uci set network.wwan=interface
371root@OpenWrt:/# uci set network.wwan.proto='dhcp'
372root@OpenWrt:/# uci set wireless.wifinet2=wifi-iface
373root@OpenWrt:/# uci set wireless.wifinet2.ssid='BCBC0020_2'
374root@OpenWrt:/# uci set wireless.wifinet2.encryption='sae'
375root@OpenWrt:/# uci set wireless.wifinet2.device='radio0'
376root@OpenWrt:/# uci set wireless.wifinet2.mode='sta'
377root@OpenWrt:/# uci set wireless.wifinet2.key='1234567890'
378root@OpenWrt:/# uci set wireless.wifinet2.network='wwan'
379root@OpenWrt:/# uci del wireless.default_radio0
380root@OpenWrt:/# uci del wireless.radio0.disabled
381root@OpenWrt:/# uci set wireless.wifinet2.ieee80211w='2'
382root@OpenWrt:/# uci commit wireless
383root@OpenWrt:/# /etc/init.d/network restart
384'radio1' is disabled
385[ 207.402165] br-lan: port 1(eth0) entered disabled state
386[ 207.406936] device eth0 left promiscuous mode
387[ 207.407174] br-lan: port 1(eth0) entered disabled state
388[ 207.496093] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
389root@OpenWrt:/# [ 209.904400] br-lan: port 1(eth0) entered blocking state
390[ 209.904446] br-lan: port 1(eth0) entered disabled state
391[ 209.909143] device eth0 entered promiscuous mode
392[ 209.916933] br-lan: port 1(eth0) entered blocking state
393[ 209.918539] br-lan: port 1(eth0) entered forwarding state
394[ 209.923892] IPv6: ADDRCONF(NETDEV_UP): br-lan: link is not ready
395[ 212.100246] ath10k_ahb a000000.wifi: 10.4 wmi init: vdevs: 16 peers: 48 tid: 96
396[ 212.100294] ath10k_ahb a000000.wifi: msdu-desc: 2500 skid: 32
397[ 212.149332] ath10k_ahb a000000.wifi: wmi print 'P 48/48 V 16 K 144 PH 176 T 186 msdu-desc: 2500 sw-crypt: 0 ct-sta: 0'
398[ 212.149843] ath10k_ahb a000000.wifi: wmi print 'free: 56528 iram: 23400 sram: 32520'
399[ 212.597715] ath10k_ahb a000000.wifi: Firmware lacks feature flag indicating a retry limit of > 2 is OK, requested limit: 4
400[ 212.599223] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
401[ 212.607875] IPv6: ADDRCONF(NETDEV_CHANGE): br-lan: link becomes ready
402[ 213.098646] ath10k_ahb a000000.wifi: NOTE: Firmware DBGLOG output disabled in debug_mask: 0x10000000
403[ 217.671937] wlan0: authenticate with 88:dc:96:10:20:30
404[ 217.890289] wlan0: send auth to 88:dc:96:10:20:30 (try 1/3)
405[ 218.181972] wlan0: authenticate with 88:dc:96:10:20:30
406[ 218.182023] wlan0: send auth to 88:dc:96:10:20:30 (try 1/3)
407[ 218.193762] wlan0: authenticated
408[ 218.200973] wlan0: associate with 88:dc:96:10:20:30 (try 1/3)
409[ 218.206619] wlan0: RX AssocResp from 88:dc:96:10:20:30 (capab=0x431 status=0 aid=1)
410[ 218.207942] wlan0: associated
411[ 218.243662] ath10k_ahb a000000.wifi: Invalid peer id 0 or peer stats buffer, peer: (null) sta: (null)
412[ 218.269205] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
413
414root@OpenWrt:/# iwinfo
415wlan0 ESSID: "BCBC0020_2"
416 Access Point: 00:AA:BB:CC:DD:12
417 Mode: Client Channel: 11 (2.462 GHz)
418 Tx-Power: 30 dBm Link Quality: 70/70
419 Signal: -27 dBm Noise: -106 dBm
420 Bit Rate: 115.6 MBit/s
421 Encryption: WPA3 SAE (CCMP)
422 Type: nl80211 HW Mode(s): 802.11bgn
423 Hardware: unknown [Generic MAC80211]
424 TX power offset: unknown
425 Frequency offset: unknown
426 Supports VAPs: yes PHY name: phy0
427
428wlan1 ESSID: unknown
429 Access Point: 00:AA:BB:CC:DD:13
430 Mode: Client Channel: unknown (unknown)
431 Tx-Power: 0 dBm Link Quality: unknown/70
432 Signal: unknown Noise: unknown
433 Bit Rate: unknown
434 Encryption: unknown
435 Type: nl80211 HW Mode(s): 802.11nac
436 Hardware: unknown [Generic MAC80211]
437 TX power offset: unknown
438 Frequency offset: unknown
439 Supports VAPs: yes PHY name: phy1
440
441root@OpenWrt:/# cat /etc/config/network
442
443config interface 'loopback'
444 option ifname 'lo'
445 option proto 'static'
446 option ipaddr '127.0.0.1'
447 option netmask '255.0.0.0'
448
449config globals 'globals'
450 option ula_prefix 'fdf6:6872:685e::/48'
451
452config interface 'lan'
453 option type 'bridge'
454 option ifname 'eth0'
455 option proto 'static'
456 option ipaddr '192.168.1.1'
457 option netmask '255.255.255.0'
458 option ip6assign '60'
459
460root@OpenWrt:/# cat /etc/config/wireless
461
462config wifi-device 'radio0'
463 option type 'mac80211'
464 option channel '11'
465 option hwmode '11g'
466 option path 'platform/soc/a000000.wifi'
467 option htmode 'HT20'
468
469config wifi-device 'radio1'
470 option type 'mac80211'
471 option channel '36'
472 option hwmode '11a'
473 option path 'platform/soc/a800000.wifi'
474 option htmode 'VHT80'
475 option disabled '1'
476
477config wifi-iface 'default_radio1'
478 option device 'radio1'
479 option network 'lan'
480 option mode 'ap'
481 option ssid 'OpenWrt'
482 option encryption 'none'
483
484config wifi-iface 'wifinet2'
485 option ssid 'BCBC0020_2'
486 option encryption 'sae'
487 option device 'radio0'
488 option mode 'sta'
489 option key '1234567890'
490 option network 'wwan'
491 option ieee80211w '2'
492
493root@OpenWrt:/# ifconfig
494br-lan Link encap:Ethernet HWaddr 34:76:C5:CB:C7:B0
495 inet addr:192.168.1.1 Bcast:192.168.1.255 Mask:255.255.255.0
496 inet6 addr: fdf6:6872:685e::1/60 Scope:Global
497 inet6 addr: fe80::3676:c5ff:fecb:c7b0/64 Scope:Link
498 UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
499 RX packets:63 errors:0 dropped:0 overruns:0 frame:0
500 TX packets:78 errors:0 dropped:0 overruns:0 carrier:0
501 collisions:0 txqueuelen:1000
502 RX bytes:5205 (5.0 KiB) TX bytes:8165 (7.9 KiB)
503
504eth0 Link encap:Ethernet HWaddr 34:76:C5:CB:C7:B0
505 UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
506 RX packets:375 errors:0 dropped:0 overruns:0 frame:0
507 TX packets:318 errors:0 dropped:0 overruns:0 carrier:0
508 collisions:0 txqueuelen:1000
509 RX bytes:36545 (35.6 KiB) TX bytes:32884 (32.1 KiB)
510
511lo Link encap:Local Loopback
512 inet addr:127.0.0.1 Mask:255.0.0.0
513 inet6 addr: ::1/128 Scope:Host
514 UP LOOPBACK RUNNING MTU:65536 Metric:1
515 RX packets:160 errors:0 dropped:0 overruns:0 frame:0
516 TX packets:160 errors:0 dropped:0 overruns:0 carrier:0
517 collisions:0 txqueuelen:1000
518 RX bytes:10880 (10.6 KiB) TX bytes:10880 (10.6 KiB)
519
520wlan0 Link encap:Ethernet HWaddr 00:AA:BB:CC:DD:12
521 inet addr:192.168.0.176 Bcast:192.168.0.255 Mask:255.255.255.0
522 inet6 addr: fe80::2aa:bbff:fecc:dd12/64 Scope:Link
523 UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
524 RX packets:25 errors:0 dropped:0 overruns:0 frame:0
525 TX packets:28 errors:0 dropped:0 overruns:0 carrier:0
526 collisions:0 txqueuelen:1000
527 RX bytes:2788 (2.7 KiB) TX bytes:3818 (3.7 KiB)
528
529root@OpenWrt:/# ping 192.168.0.1
530PING 192.168.0.1 (192.168.0.1): 56 data bytes
53164 bytes from 192.168.0.1: seq=0 ttl=64 time=20.331 ms
53264 bytes from 192.168.0.1: seq=1 ttl=64 time=47.544 ms
53364 bytes from 192.168.0.1: seq=2 ttl=64 time=12.246 ms
534^C
535--- 192.168.0.1 ping statistics ---
5363 packets transmitted, 3 packets received, 0% packet loss
537round-trip min/avg/max = 12.246/26.707/47.544 ms