· 6 years ago · Apr 16, 2019, 01:14 PM
1[nemo@Sailfish ~]$ dmesg
2[ 0.000000] Initializing cgroup subsys cpuset
3[ 0.000000] Initializing cgroup subsys cpu
4[ 0.000000] Initializing cgroup subsys cpuacct
5[ 0.000000] Linux version 3.18.31-lineageOS (ubuntu@ubuntu) (gcc version 4.9 20150123 (prerelease) (GCC) ) #7 SMP PREEMPT Thu Apr 11 11:21:25 UTC 2019
6[ 0.000000] CPU: AArch64 Processor [511f2112] revision 2
7[ 0.000000] alternatives: detected feature GIC system register CPU interface
8[ 0.000000] Machine: Sheridan
9[ 0.000000] efi: Getting EFI parameters from FDT:
10[ 0.000000] efi: UEFI not found.
11[ 0.000000] Reserved memory: reserved region for node 'removed_regions@85800000': base 0x0000000085800000, size 48 MiB
12[ 0.000000] Reserved memory: reserved region for node 'peripheral_region@8ea00000': base 0x000000008ea00000, size 45 MiB
13[ 0.000000] Reserved memory: reserved region for node 'modem_region@88800000': base 0x0000000088800000, size 98 MiB
14[ 0.000000] Reserved memory: reserved region for node 'dfps_data_mem@83400000': base 0x0000000083400000, size 0 MiB
15[ 0.000000] Reserved memory: reserved region for node 'cont_splash_mem@83401000': base 0x0000000083401000, size 35 MiB
16[ 0.000000] Reserved memory: reserved region for node 'cont_splash_mem_hdmi@b1c00000': base 0x00000000b1c00000, size 35 MiB
17[ 0.000000] Reserved memory: reserved region for node 'ramoops_mem_region': base 0x00000000af000000, size 0 MiB
18[ 0.000000] Reserved memory: reserved region for node 'tzlog_bck_region': base 0x00000000aefe8000, size 0 MiB
19[ 0.000000] Reserved memory: reserved region for node 'wdog_cpuctx_region': base 0x00000000aefea000, size 0 MiB
20[ 0.000000] Removed memory: created DMA memory pool at 0x0000000085800000, size 48 MiB
21[ 0.000000] Reserved memory: initialized node removed_regions@85800000, compatible id removed-dma-pool
22[ 0.000000] Removed memory: created DMA memory pool at 0x000000008ea00000, size 45 MiB
23[ 0.000000] Reserved memory: initialized node peripheral_region@8ea00000, compatible id removed-dma-pool
24[ 0.000000] Reserved memory: allocated memory for 'adsp_region' node: base 0x00000000ff800000, size 4 MiB
25[ 0.000000] Reserved memory: created CMA memory pool at 0x00000000ff800000, size 4 MiB
26[ 0.000000] Reserved memory: initialized node adsp_region, compatible id shared-dma-pool
27[ 0.000000] Reserved memory: allocated memory for 'qseecom_region' node: base 0x00000000fe400000, size 20 MiB
28[ 0.000000] Reserved memory: created CMA memory pool at 0x00000000fe400000, size 20 MiB
29[ 0.000000] Reserved memory: initialized node qseecom_region, compatible id shared-dma-pool
30[ 0.000000] Reserved memory: allocated memory for 'secure_region' node: base 0x00000000f8800000, size 92 MiB
31[ 0.000000] Reserved memory: created CMA memory pool at 0x00000000f8800000, size 92 MiB
32[ 0.000000] Reserved memory: initialized node secure_region, compatible id shared-dma-pool
33[ 0.000000] Removed memory: created DMA memory pool at 0x0000000088800000, size 98 MiB
34[ 0.000000] Reserved memory: initialized node modem_region@88800000, compatible id removed-dma-pool
35[ 0.000000] cma: Reserved 32 MiB at 0x00000000f6800000
36[ 0.000000] On node 0 totalpages: 992696
37[ 0.000000] DMA zone: 7426 pages used for memmap
38[ 0.000000] DMA zone: 0 pages reserved
39[ 0.000000] DMA zone: 475240 pages, LIFO batch:31
40[ 0.000000] Normal zone: 8086 pages used for memmap
41[ 0.000000] Normal zone: 517456 pages, LIFO batch:31
42[ 0.000000] psci: probing for conduit method from DT.
43[ 0.000000] psci: PSCIv1.0 detected in firmware.
44[ 0.000000] psci: Using standard PSCI v0.2 function IDs
45[ 0.000000] psci: Initializing psci_cpu_init
46[ 0.000000] psci: Initializing psci_cpu_init
47[ 0.000000] psci: Initializing psci_cpu_init
48[ 0.000000] PERCPU: Embedded 13 pages/cpu @ffffffc0fe30c000 s20736 r0 d32512 u53248
49[ 0.000000] pcpu-alloc: s20736 r0 d32512 u53248 alloc=13*4096
50[ 0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3
51[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 977184
52[ 0.000000] Kernel command line: sched_enable_hmp=1 sched_enable_power_aware=1 app_setting.use_32bit_app_setting=1 androidboot.hardware=qcom user_debug=31 msm_rtb.filter=0x37 ehci-hcd.park=3 lpm_levels.sleep_disabled=1 cma=32M@0-0xffffffff selinux=0 audit=0 cnsscore.pcie_link_down_panic=1 androidboot.bootdevice=624000.ufshc androidboot.serialno=ZY223LT4KZ androidboot.baseband=msm androidboot.mode=normal androidboot.device=sheridan androidboot.hwrev=0x83B0 androidboot.radio=ROW androidboot.powerup_reason=0x00008000 androidboot.bootreason=watchdog msm_poweroff.download_mode=0 androidboot.fsg-id= androidboot.wifimacaddr=68:C4:4D:9E:18:C2,68:C4:4D:9E:18:C3 androidboot.btmacaddr=68:C4:4D:9E:18:C1 mdss_mdp.panel=1:dsi:0:qcom,mdss_dsi_mot_smd_546_QHD_g_cmd_v0 androidboot.bootloader=0x901A androidboot.carrier=reteu androidboot.poweroff_alarm=0 androidboot.build_vars=black androidboot.hardware.sku=XT1650-03 androidboot.secure_hardware=1 androidboot.bl_state=2 androidboot.cid=0x32 androidboot.uid
53[ 0.000000] audit: disabled (until reboot)
54[ 0.000000] log_buf_len individual max cpu contribution: 32768 bytes
55[ 0.000000] log_buf_len total cpu_extra contributions: 98304 bytes
56[ 0.000000] log_buf_len min size: 131072 bytes
57[ 0.000000] log_buf_len: 262144 bytes
58[ 0.000000] early log buf free: 125444(95%)
59[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
60[ 0.000000] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
61[ 0.000000] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
62[ 0.000000] Memory: 3641428K/3970784K available (14783K kernel code, 1865K rwdata, 7972K rodata, 516K init, 3326K bss, 329356K reserved)
63[ 0.000000] Virtual kernel memory layout:
64[ 0.000000] SLUB: HWalign=128, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
65[ 0.000000] HMP scheduling enabled.
66[ 0.000000] Preemptible hierarchical RCU implementation.
67[ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
68[ 0.000000] RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=4.
69[ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
70[ 0.000000] NR_IRQS:64 nr_irqs:64 0
71[ 0.000000] CPU0: found redistributor 0 region 0:0x0000000009c00000
72[ 0.000000] mpm_init_irq_domain(): Cannot find irq controller for qcom,gpio-parent
73[ 0.000000] MPM 1 irq mapping errored -517
74[ 0.000000] Architected cp15 and mmio timer(s) running at 19.20MHz (virt/virt).
75[ 0.000004] sched_clock: 56 bits at 19MHz, resolution 52ns, wraps every 3579139424256ns
76[ 0.000017] Switched to clocksource arch_sys_counter
77[ 0.000865] Console: colour dummy device 80x25
78[ 0.001356] console [tty0] enabled
79[ 0.002828] allocated 16777216 bytes of page_cgroup
80[ 0.002839] please try 'cgroup_disable=memory' option if you don't want memory cgroups
81[ 0.002858] Calibrating delay loop (skipped), value calculated using timer frequency.. 38.00 BogoMIPS (lpj=64000)
82[ 0.002873] pid_max: default: 32768 minimum: 301
83[ 0.002932] Security Framework initialized
84[ 0.002947] Yama: becoming mindful.
85[ 0.002989] Mount-cache hash table entries: 8192 (order: 4, 65536 bytes)
86[ 0.003001] Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes)
87[ 0.003501] Initializing cgroup subsys memory
88[ 0.003524] Initializing cgroup subsys devices
89[ 0.003537] Initializing cgroup subsys freezer
90[ 0.003548] Initializing cgroup subsys net_cls
91[ 0.003558] Initializing cgroup subsys blkio
92[ 0.003569] Initializing cgroup subsys bfqio
93[ 0.003579] Initializing cgroup subsys perf_event
94[ 0.003835] /cpus/cpu@0: Unknown CPU type
95[ 0.003850] /cpus/cpu@1: Unknown CPU type
96[ 0.003862] /cpus/cpu@100: Unknown CPU type
97[ 0.003876] /cpus/cpu@101: Unknown CPU type
98[ 0.003913] hw perfevents: enabled with arm/armv8-pmuv3 PMU driver, 9 counters available
99[ 0.003941] EFI services will not be available.
100[ 0.004052] NOHZ: local_softirq_pending 02
101[ 0.008214] MSM Memory Dump base table set up
102[ 0.008246] MSM Memory Dump apps data table set up
103[ 0.008272] hyp_assign_table is not functional as qcom_secure_mem is not allocated.
104[ 0.009870] clock-cpu-8996: configuring clocks for the perf cluster
105[ 0.010141] cpu_clock_8996_early_init: finished CPU clock configuration
106[ 0.012159] CPU1: found redistributor 1 region 0:0x0000000009c40000
107[ 0.014174] CPU2: found redistributor 100 region 0:0x0000000009c80000
108[ 0.015984] CPU3: found redistributor 101 region 0:0x0000000009cc0000
109[ 0.016122] Brought up 4 CPUs
110[ 0.016171] SMP: Total of 4 processors activated.
111[ 0.017031] devtmpfs: initialized
112[ 0.019494] DMI not present or invalid.
113[ 0.026956] pinctrl core: initialized pinctrl subsystem
114[ 0.027319] regulator-dummy: no parameters
115[ 0.086403] NET: Registered protocol family 16
116[ 0.090112] cpuidle: using governor ladder
117[ 0.120065] cpuidle: using governor menu
118[ 0.126763] cpuidle: using governor qcom
119[ 0.127909] vdso: 2 pages (1 code @ ffffffc000eed000, 1 data @ ffffffc001760000)
120[ 0.128357] software IO TLB [mem 0xffc00000-0x100000000] (4MB) mapped at [ffffffc07fc00000-ffffffc07fffffff]
121[ 0.129120] DMA: preallocated 256 KiB pool for atomic allocations
122[ 0.142560] qcom,msm-apm 99e0000.apm: overriding clock sources across APM switch
123[ 0.143614] sps:sps is ready.
124[ 0.145278] irq: no irq domain found for /soc/pinctrl@01010000 !
125[ 0.146843] cpu-clock-8996 6400000.qcom,cpu-clock-8996: resources init failed
126[ 0.174289] smd_channel_probe_now: allocation table not initialized
127[ 0.174574] smd_channel_probe_now: allocation table not initialized
128[ 0.174854] smd_channel_probe_now: allocation table not initialized
129[ 0.175125] smd_channel_probe_now: allocation table not initialized
130[ 0.175369] msm_watchdog 9830000.qcom,wdt: wdog absent resource not present
131[ 0.176039] msm_watchdog 9830000.qcom,wdt: MSM Watchdog Initialized
132[ 0.176789] msm_rpm_dev_probe: APSS-RPM communication over GLINK
133[ 0.184921] spmi_pmic_arb 400f000.qcom,spmi: PMIC Arb Version-2 0x20010000
134[ 0.186370] spmi_pmic_arb 400f000.qcom,spmi: missing property: qcom,pmic-arb-max-periph-interrupts
135[ 0.190677] pmi8994_s2: 400 <--> 1015 mV at 550 mV normal idle
136[ 0.191353] platform 9300000.qcom,lpass: assigned reserved memory node peripheral_region@8ea00000
137[ 0.191655] platform ce0000.qcom,venus: assigned reserved memory node peripheral_region@8ea00000
138[ 0.192119] platform 1c00000.qcom,ssc: assigned reserved memory node peripheral_region@8ea00000
139[ 0.192502] platform 2080000.qcom,mss: assigned reserved memory node modem_region@88800000
140[ 0.195148] msm-thermal 70000.qcom,msm-thermal: msm_thermal:Failed reading node=/soc/qcom,msm-thermal, key=qcom,rpm-phase-resource-type err=-22. KTM continues
141[ 0.195184] msm-thermal 70000.qcom,msm-thermal: msm_thermal:Failed reading node=/soc/qcom,msm-thermal, key=qcom,gfx-sensor-id. err=-22. KTM continues
142[ 0.195214] msm-thermal 70000.qcom,msm-thermal: probe_vdd_mx:Failed reading node=/soc/qcom,msm-thermal, key=qcom,mx-restriction-temp. KTM continues
143[ 0.195238] msm-thermal 70000.qcom,msm-thermal: probe_psm:Failed reading node=/soc/qcom,msm-thermal, key=qcom,pmic-sw-mode-temp. err=-22. KTM continues
144[ 0.195358] msm_thermal:vdd_restriction_reg_init Defer regulator vdd-dig probe
145[ 0.195372] msm_thermal:probe_vdd_rstr Err regulator init. err:-517. KTM continues.
146[ 0.195388] msm-thermal 70000.qcom,msm-thermal: probe_vdd_rstr:Failed reading node=/soc/qcom,msm-thermal, key=qcom,max-freq-level. err=-517. KTM continues
147[ 0.195407] msm_thermal:msm_thermal_dev_probe Failed reading node=/soc/qcom,msm-thermal, key=qcom,online-hotplug-core. err:-517
148[ 0.200437] platform soc:qcom,msm-adsprpc-mem: assigned reserved memory node adsp_region
149[ 0.203991] smd_channel_probe_now: allocation table not initialized
150[ 0.204198] msm_rpm_trans_notify_state: glink config params: transport=(null), edge=rpm, name=rpm_requests
151[ 0.204834] msm_cache_erp64 6500000.qcom,cache_erp64: Registering for L1 error interrupts
152[ 0.204933] msm_cache_erp64 6500000.qcom,cache_erp64: Registering for L2 error interrupts
153[ 0.205097] msm_cache_erp64 6500000.qcom,cache_erp64: Registering for L3 error interrupts
154[ 0.205363] msm_m4m_erp 9a40000.qcom,m4m_erp64: Registering for M4M error interrupts
155[ 0.207261] apc0_pwrcl_mem_acc_corner: 0 <--> 0 mV
156[ 0.207599] apc1_perfcl_mem_acc_corner: 0 <--> 0 mV
157[ 0.207919] apcc_l3_mem_acc_corner: 0 <--> 0 mV
158[ 0.208252] gfx_mem_acc_corner: 0 <--> 0 mV
159[ 0.208638] kryo0-retention: 468 <--> 892 mV at 520 mV
160[ 0.208838] kryo0: 468 <--> 892 mV at 754 mV
161[ 0.208968] kryo_regulator_probe: kryo0: default LDO functional volt=754021 uV, LDO retention volt=521789 uV, Vref func=325285 + 4466*(val), cluster-num=0
162[ 0.209284] kryo1-retention: 468 <--> 892 mV at 520 mV
163[ 0.209486] kryo1: 468 <--> 892 mV at 754 mV
164[ 0.209610] kryo_regulator_probe: kryo1: default LDO functional volt=754021 uV, LDO retention volt=521789 uV, Vref func=325285 + 4466*(val), cluster-num=1
165[ 0.214154] platform soc:qcom,kgsl-hyp: assigned reserved memory node peripheral_region@8ea00000
166[ 0.215459] msm_mpm_dev_probe(): Cannot get clk resource for XO: -517
167[ 0.233708] __of_mpm_init(): MPM driver mapping exists
168[ 0.234041] persistent_ram: persistent_ram: paddr: 00000000af000000, vaddr: ffffff8000440000, buf size = 0x1fff4
169[ 0.234085] persistent_ram: persistent_ram: paddr: 00000000af020000, vaddr: ffffff8001c00000, buf size = 0x3fff4
170[ 0.234594] persistent_ram: persistent_ram: paddr: 00000000af060000, vaddr: ffffff8000420000, buf size = 0x7f4
171[ 0.235266] console [pstore-1] enabled
172[ 0.235279] pstore: Registered ramoops as persistent store backend
173[ 0.235294] ramoops: attached 0x80000@0xaf000000, ecc: 0/0
174[ 0.239764] cpu-clock-8996 6400000.qcom,cpu-clock-8996: resources init failed
175[ 0.240543] pm8994_s1_corner: 0 <--> 0 mV at 0 mV normal idle
176[ 0.240961] pm8994_s1_floor_corner: 0 <--> 0 mV at 0 mV normal idle
177[ 0.241351] pm8994_s1_corner_ao: 0 <--> 0 mV at 0 mV normal idle
178[ 0.241760] pm8994_s2_corner: 0 <--> 0 mV at 0 mV normal idle
179[ 0.242135] pm8994_s2_corner_ao: 0 <--> 0 mV at 0 mV normal idle
180[ 0.242556] pm8994_s3: 1300 mV normal idle
181[ 0.242975] pm8994_s4: 1800 mV normal idle
182[ 0.243424] pm8994_s5: 2150 mV normal idle
183[ 0.243846] pm8994_s7: 800 mV normal idle
184[ 0.244255] pm8994_l1: 1000 mV normal idle
185[ 0.244683] pm8994_l2: 1250 mV normal idle
186[ 0.245301] pm8994_l3: 1000 mV normal idle
187[ 0.245732] pm8994_l4: 1225 mV normal idle
188[ 0.246146] pm8994_l6: 1200 mV normal idle
189[ 0.246572] pm8994_l8: 1800 mV normal idle
190[ 0.247019] pm8994_l9: 1800 mV normal idle
191[ 0.247441] pm8994_l10: 1800 mV normal idle
192[ 0.247852] pm8994_l11: 1100 <--> 1300 mV at 1250 mV normal idle
193[ 0.248279] pm8994_l12: 1800 mV normal idle
194[ 0.249051] pm8994_l13: 1800 <--> 2950 mV at 2950 mV normal idle
195[ 0.249479] pm8994_l14: 1800 mV normal idle
196[ 0.250242] pm8994_l15: 1800 mV normal idle
197[ 0.250657] pm8994_l16: 2700 mV normal idle
198[ 0.251370] pm8994_l17: 3000 mV normal idle
199[ 0.251777] pm8994_l18: 2700 <--> 2900 mV at 2700 mV normal idle
200[ 0.252156] pm8994_l18_pin_ctrl: 2700 <--> 2900 mV at 2700 mV normal idle
201[ 0.252678] pm8994_l19: 3100 mV normal idle
202[ 0.253105] pm8994_l20: 2950 mV normal idle
203[ 0.253554] pm8994_l21: 2950 mV normal idle
204[ 0.254084] pm8994_l22: 3300 mV normal idle
205[ 0.254505] pm8994_l23: 1850 mV normal idle
206[ 0.254923] pm8994_l24: 3075 mV normal idle
207[ 0.255349] pm8994_l25: 1200 mV normal idle
208[ 0.256019] pm8994_l26_corner: 0 <--> 0 mV at 0 mV normal idle
209[ 0.256387] pm8994_l26_floor_corner: 0 <--> 0 mV at 0 mV normal idle
210[ 0.256845] pm8994_l27: 1275 mV normal idle
211[ 0.257270] pm8994_l28: 925 mV normal idle
212[ 0.258013] pm8994_l29: 2800 mV normal idle
213[ 0.258449] pm8994_l30: 1800 mV normal idle
214[ 0.258864] pm8994_l32: 1800 mV normal idle
215[ 0.259279] pm8994_lvs1: no parameters
216[ 0.261390] pm8994_lvs2: no parameters
217[ 0.261784] pmi8994_s1: 1025 mV normal idle
218[ 0.262197] pmi8994_boost_5v: no parameters
219[ 0.262523] pmi8994_boost_pin_ctrl: no parameters
220[ 0.262918] pmi8994_boostbypass: 3150 <--> 3600 mV at 3150 mV normal idle
221[ 0.263254] pm8994_s11: 470 <--> 1140 mV at 905 mV normal idle
222[ 0.263511] pm8994_s11_avs_limit: 470 <--> 1140 mV
223[ 0.263624] spm_regulator_probe: name=pm8994_s11, range=LV, voltage=905000 uV, mode=AUTO, step rate=2400 uV/us
224[ 0.264509] msm-thermal 70000.qcom,msm-thermal: msm_thermal:Failed reading node=/soc/qcom,msm-thermal, key=qcom,rpm-phase-resource-type err=-22. KTM continues
225[ 0.264544] msm-thermal 70000.qcom,msm-thermal: msm_thermal:Failed reading node=/soc/qcom,msm-thermal, key=qcom,gfx-sensor-id. err=-22. KTM continues
226[ 0.264566] msm_thermal:sensor_mgr_init_threshold threshold id already initialized
227[ 0.264590] msm-thermal 70000.qcom,msm-thermal: probe_vdd_mx:Failed reading node=/soc/qcom,msm-thermal, key=qcom,mx-restriction-temp. KTM continues
228[ 0.264616] msm-thermal 70000.qcom,msm-thermal: probe_psm:Failed reading node=/soc/qcom,msm-thermal, key=qcom,pmic-sw-mode-temp. err=-22. KTM continues
229[ 0.264941] msm_thermal:vdd_restriction_reg_init Defer regulator vdd-gfx probe
230[ 0.264961] msm_thermal:probe_vdd_rstr Err regulator init. err:-517. KTM continues.
231[ 0.264981] msm-thermal 70000.qcom,msm-thermal: probe_vdd_rstr:Failed reading node=/soc/qcom,msm-thermal, key=qcom,max-freq-level. err=-517. KTM continues
232[ 0.265004] msm_thermal:msm_thermal_dev_probe Failed reading node=/soc/qcom,msm-thermal, key=qcom,online-hotplug-core. err:-517
233[ 0.265461] msm_mpm_dev_probe(): Cannot get clk resource for XO: -517
234[ 0.265710] cpu-clock-8996 6400000.qcom,cpu-clock-8996: resources init failed
235[ 0.284367] qcom,gcc-8996 300000.qcom,gcc: Registered GCC clocks.
236[ 0.285366] vfe0_clk_src: set OPP pair(75000000 Hz: 3 uV) on a10000.qcom,vfe0
237[ 0.285393] vfe0_clk_src: set OPP pair(320000000 Hz: 5 uV) on a10000.qcom,vfe0
238[ 0.285412] vfe0_clk_src: set OPP pair(600000000 Hz: 7 uV) on a10000.qcom,vfe0
239[ 0.285643] vfe1_clk_src: set OPP pair(75000000 Hz: 3 uV) on a14000.qcom,vfe1
240[ 0.285664] vfe1_clk_src: set OPP pair(320000000 Hz: 5 uV) on a14000.qcom,vfe1
241[ 0.285682] vfe1_clk_src: set OPP pair(600000000 Hz: 7 uV) on a14000.qcom,vfe1
242[ 0.285941] cpp_clk_src: set OPP pair(100000000 Hz: 3 uV) on a04000.qcom,cpp
243[ 0.285961] cpp_clk_src: set OPP pair(480000000 Hz: 5 uV) on a04000.qcom,cpp
244[ 0.285978] cpp_clk_src: set OPP pair(640000000 Hz: 7 uV) on a04000.qcom,cpp
245[ 0.295020] qcom,mmsscc-8996 8c0000.qcom,mmsscc: Registered MMSS clocks.
246[ 0.297378] msm-thermal 70000.qcom,msm-thermal: msm_thermal:Failed reading node=/soc/qcom,msm-thermal, key=qcom,rpm-phase-resource-type err=-22. KTM continues
247[ 0.297419] msm-thermal 70000.qcom,msm-thermal: msm_thermal:Failed reading node=/soc/qcom,msm-thermal, key=qcom,gfx-sensor-id. err=-22. KTM continues
248[ 0.297442] msm_thermal:sensor_mgr_init_threshold threshold id already initialized
249[ 0.297466] msm-thermal 70000.qcom,msm-thermal: probe_vdd_mx:Failed reading node=/soc/qcom,msm-thermal, key=qcom,mx-restriction-temp. KTM continues
250[ 0.297492] msm-thermal 70000.qcom,msm-thermal: probe_psm:Failed reading node=/soc/qcom,msm-thermal, key=qcom,pmic-sw-mode-temp. err=-22. KTM continues
251[ 0.297700] msm_thermal:vdd_restriction_reg_init Defer regulator vdd-gfx probe
252[ 0.297719] msm_thermal:probe_vdd_rstr Err regulator init. err:-517. KTM continues.
253[ 0.297738] msm-thermal 70000.qcom,msm-thermal: probe_vdd_rstr:Failed reading node=/soc/qcom,msm-thermal, key=qcom,max-freq-level. err=-517. KTM continues
254[ 0.297761] msm_thermal:msm_thermal_dev_probe Failed reading node=/soc/qcom,msm-thermal, key=qcom,online-hotplug-core. err:-517
255[ 0.298270] cpr3_msm8996_hmss_read_fuse_data: apc0_pwrcl_corner: speed bin = 0
256[ 0.298292] cpr3_msm8996_hmss_read_fuse_data: apc0_pwrcl_corner: CPR fusing revision = 6
257[ 0.298309] cpr3_msm8996_hmss_read_fuse_data: apc0_pwrcl_corner: using redundant fuses = N
258[ 0.298326] cpr3_msm8996_hmss_read_fuse_data: apc0_pwrcl_corner: CPR limitation = none
259[ 0.298342] cpr3_msm8996_hmss_read_fuse_data: apc0_pwrcl_corner: CPR partial binning limitation = none
260[ 0.298362] cpr3_msm8996_hmss_read_fuse_data: apc0_pwrcl_corner: Retention voltage fuses: VDD_MX = 4, VDD_APCC = 4
261[ 0.298565] cpr3_hmss_kvreg_init: apc0_pwrcl_corner: LDO min headroom=150000 uV, LDO max headroom=470000 uV, LDO adj=0 uV, LDO mode=allowed, LDO retention=490000 uV
262[ 0.298756] cpr3_msm8996_hmss_calculate_open_loop_voltages: apc0_pwrcl_corner: fused MinSVS: open-loop= 575000 uV
263[ 0.298776] cpr3_msm8996_hmss_calculate_open_loop_voltages: apc0_pwrcl_corner: fused SVS: open-loop= 665000 uV
264[ 0.298795] cpr3_msm8996_hmss_calculate_open_loop_voltages: apc0_pwrcl_corner: fused NOM: open-loop= 775000 uV
265[ 0.298812] cpr3_msm8996_hmss_calculate_open_loop_voltages: apc0_pwrcl_corner: fused TURBO: open-loop= 920000 uV
266[ 0.298909] cpr3_msm8996_hmss_calculate_target_quotients: apc0_pwrcl_corner: fused MinSVS: quot[ 7]= 311
267[ 0.298928] cpr3_msm8996_hmss_calculate_target_quotients: apc0_pwrcl_corner: fused SVS: quot[ 7]= 475, quot_offset[ 7]= 120
268[ 0.298947] cpr3_msm8996_hmss_calculate_target_quotients: apc0_pwrcl_corner: fused NOM: quot[ 7]= 705, quot_offset[ 7]= 230
269[ 0.298966] cpr3_msm8996_hmss_calculate_target_quotients: apc0_pwrcl_corner: fused TURBO: quot[ 7]= 978, quot_offset[ 7]= 270
270[ 0.299104] cpr3_msm8996_hmss_read_fuse_data: apc0_cbf_corner: speed bin = 0
271[ 0.299122] cpr3_msm8996_hmss_read_fuse_data: apc0_cbf_corner: CPR fusing revision = 6
272[ 0.299139] cpr3_msm8996_hmss_read_fuse_data: apc0_cbf_corner: using redundant fuses = N
273[ 0.299156] cpr3_msm8996_hmss_read_fuse_data: apc0_cbf_corner: CPR limitation = none
274[ 0.299173] cpr3_msm8996_hmss_read_fuse_data: apc0_cbf_corner: CPR partial binning limitation = none
275[ 0.299192] cpr3_msm8996_hmss_read_fuse_data: apc0_cbf_corner: Retention voltage fuses: VDD_MX = 4, VDD_APCC = 4
276[ 0.299327] cpr3_msm8996_hmss_calculate_open_loop_voltages: apc0_cbf_corner: fused MinSVS: open-loop= 575000 uV
277[ 0.299346] cpr3_msm8996_hmss_calculate_open_loop_voltages: apc0_cbf_corner: fused SVS: open-loop= 665000 uV
278[ 0.299363] cpr3_msm8996_hmss_calculate_open_loop_voltages: apc0_cbf_corner: fused NOM: open-loop= 775000 uV
279[ 0.299380] cpr3_msm8996_hmss_calculate_open_loop_voltages: apc0_cbf_corner: fused TURBO: open-loop= 920000 uV
280[ 0.299432] cpr3_msm8996_hmss_calculate_target_quotients: apc0_cbf_corner: fused MinSVS: quot[ 7]= 311
281[ 0.299450] cpr3_msm8996_hmss_calculate_target_quotients: apc0_cbf_corner: fused SVS: quot[ 7]= 475, quot_offset[ 7]= 120
282[ 0.299469] cpr3_msm8996_hmss_calculate_target_quotients: apc0_cbf_corner: fused NOM: quot[ 7]= 705, quot_offset[ 7]= 230
283[ 0.299487] cpr3_msm8996_hmss_calculate_target_quotients: apc0_cbf_corner: fused TURBO: quot[ 7]= 978, quot_offset[ 7]= 270
284[ 0.299599] cpr3_msm8996_hmss_read_fuse_data: apc1_corner: speed bin = 0
285[ 0.299615] cpr3_msm8996_hmss_read_fuse_data: apc1_corner: CPR fusing revision = 6
286[ 0.299631] cpr3_msm8996_hmss_read_fuse_data: apc1_corner: using redundant fuses = N
287[ 0.299647] cpr3_msm8996_hmss_read_fuse_data: apc1_corner: CPR limitation = none
288[ 0.299663] cpr3_msm8996_hmss_read_fuse_data: apc1_corner: CPR partial binning limitation = none
289[ 0.299682] cpr3_msm8996_hmss_read_fuse_data: apc1_corner: Retention voltage fuses: VDD_MX = 4, VDD_APCC = 4
290[ 0.299891] cpr3_hmss_kvreg_init: apc1_corner: LDO min headroom=150000 uV, LDO max headroom=470000 uV, LDO adj=0 uV, LDO mode=allowed, LDO retention=490000 uV
291[ 0.300199] cpr3_msm8996_hmss_calculate_open_loop_voltages: apc1_corner: fused MinSVS: open-loop= 575000 uV
292[ 0.300220] cpr3_msm8996_hmss_calculate_open_loop_voltages: apc1_corner: fused SVS: open-loop= 645000 uV
293[ 0.300236] cpr3_msm8996_hmss_calculate_open_loop_voltages: apc1_corner: fused NOM: open-loop= 725000 uV
294[ 0.300252] cpr3_msm8996_hmss_calculate_open_loop_voltages: apc1_corner: fused TURBO: open-loop= 980000 uV
295[ 0.300376] cpr3_msm8996_hmss_calculate_target_quotients: apc1_corner: fused MinSVS: quot[ 7]= 318
296[ 0.300395] cpr3_msm8996_hmss_calculate_target_quotients: apc1_corner: fused SVS: quot[ 7]= 439, quot_offset[ 7]= 80
297[ 0.300414] cpr3_msm8996_hmss_calculate_target_quotients: apc1_corner: fused NOM: quot[ 7]= 605, quot_offset[ 7]= 165
298[ 0.300433] cpr3_msm8996_hmss_calculate_target_quotients: apc1_corner: fused TURBO: quot[ 7]=1082, quot_offset[ 7]= 475
299[ 0.300907] cpr3_regulator_init_ctrl: apcc: Default CPR mode = SW closed-loop
300[ 0.301058] apc0_pwrcl_corner: 0 <--> 0 mV at 0 mV
301[ 0.301269] apc0_cbf_corner: 0 <--> 0 mV at 0 mV
302[ 0.304570] cpr3_regulator_measure_aging: apcc: average quotient delta=15 (count=10)
303[ 0.304605] cpr3_regulator_aging_adjust: apcc: aging measurement successful; aging reference adjustment voltage=1562 uV
304[ 0.305116] apc1_corner: 0 <--> 0 mV at 0 mV
305[ 0.306509] cpr3_msm8996_mmss_read_fuse_data: gfx_corner: CPR fusing revision = 4
306[ 0.306535] cpr3_msm8996_mmss_read_fuse_data: gfx_corner: CPR limitation = none
307[ 0.306853] cpr3_msm8996_mmss_calculate_open_loop_voltages: gfx_corner: fuse_corner[0] open-loop= 620000 uV
308[ 0.306874] cpr3_msm8996_mmss_calculate_open_loop_voltages: gfx_corner: fuse_corner[1] open-loop= 665000 uV
309[ 0.306891] cpr3_msm8996_mmss_calculate_open_loop_voltages: gfx_corner: fuse_corner[2] open-loop= 775000 uV
310[ 0.306908] cpr3_msm8996_mmss_calculate_open_loop_voltages: gfx_corner: fuse_corner[3] open-loop= 875000 uV
311[ 0.307085] cpr3_regulator_init_ctrl: gfx: Default CPR mode = closed-loop
312[ 0.307222] gfx_corner: 0 <--> 0 mV at 0 mV
313[ 0.308592] cpu-clock-8996 6400000.qcom,cpu-clock-8996: using perf/pwr/cbf speed bin 0 and pvs_ver 0
314[ 0.310674] clock-cpu-8996: set OPP pair (307200000 Hz, 595000 uv) on cpu0
315[ 0.310722] clock-cpu-8996: set OPP pair (1593600000 Hz, 895000 uv) on cpu0
316[ 0.310748] clock-cpu-8996: set OPP pair (307200000 Hz, 595000 uv) on cpu1
317[ 0.310792] clock-cpu-8996: set OPP pair (1593600000 Hz, 895000 uv) on cpu1
318[ 0.310817] clock-cpu-8996: set OPP pair (307200000 Hz, 595000 uv) on cpu2
319[ 0.310878] clock-cpu-8996: set OPP pair (2150400000 Hz, 965000 uv) on cpu2
320[ 0.310901] clock-cpu-8996: set OPP pair (307200000 Hz, 595000 uv) on cpu3
321[ 0.310957] clock-cpu-8996: set OPP pair (2150400000 Hz, 965000 uv) on cpu3
322[ 0.311104] clock-cpu-8996: set OPP pair (307200000 Hz, 620000 uv) on soc:qcom,m4m
323[ 0.311155] clock-cpu-8996: set OPP pair (1593600000 Hz, 895000 uv) on soc:qcom,m4m
324[ 0.311531] qcom,gpucc-8996 8c0000.qcom,gpucc: using speed bin 0
325[ 0.311920] gfx3d_clk_src_v2: set OPP pair(133000000 Hz: 550000 uV) on b00000.qcom,kgsl-3d0
326[ 0.311953] gfx3d_clk_src_v2: set OPP pair(624000000 Hz: 875000 uV) on b00000.qcom,kgsl-3d0
327[ 0.313519] qcom,gpucc-8996 8c0000.qcom,gpucc: Registered GPU clocks.
328[ 0.314318] msm-thermal 70000.qcom,msm-thermal: msm_thermal:Failed reading node=/soc/qcom,msm-thermal, key=qcom,rpm-phase-resource-type err=-22. KTM continues
329[ 0.314351] msm-thermal 70000.qcom,msm-thermal: msm_thermal:Failed reading node=/soc/qcom,msm-thermal, key=qcom,gfx-sensor-id. err=-22. KTM continues
330[ 0.314374] msm_thermal:sensor_mgr_init_threshold threshold id already initialized
331[ 0.314397] msm-thermal 70000.qcom,msm-thermal: probe_vdd_mx:Failed reading node=/soc/qcom,msm-thermal, key=qcom,mx-restriction-temp. KTM continues
332[ 0.314423] msm-thermal 70000.qcom,msm-thermal: probe_psm:Failed reading node=/soc/qcom,msm-thermal, key=qcom,pmic-sw-mode-temp. err=-22. KTM continues
333[ 0.314722] msm_thermal:update_cpu_freq Unable to update policy for cpu:0. err:-19
334[ 0.314744] msm_thermal:update_cpu_freq Unable to update policy for cpu:2. err:-19
335[ 0.314762] msm_thermal:update_cpu_freq Unable to update policy for cpu:2. err:-19
336[ 0.314794] msm-thermal 70000.qcom,msm-thermal: probe_ocr:Failed reading node=/soc/qcom,msm-thermal, key=qcom,pmic-opt-curr-temp err:-22. KTM continues
337[ 0.315946] msm_thermal:update_cpu_freq Unable to update policy for cpu:0. err:-19
338[ 0.315973] msm_thermal:update_cpu_freq Unable to update policy for cpu:2. err:-19
339[ 0.315992] msm_thermal:update_cpu_freq Unable to update policy for cpu:2. err:-19
340[ 0.316265] i2c-msm-v2 757a000.i2c: probing driver i2c-msm-v2
341[ 0.316399] AXI: msm_bus_scale_register_client(): msm_bus_scale_register_client: Bus driver not ready.
342[ 0.316422] i2c-msm-v2 757a000.i2c: msm_bus_scale_register_client(mstr-id:86):0 (not a problem)
343[ 0.317195] i2c-msm-v2 75b5000.i2c: probing driver i2c-msm-v2
344[ 0.317289] AXI: msm_bus_scale_register_client(): msm_bus_scale_register_client: Bus driver not ready.
345[ 0.317310] i2c-msm-v2 75b5000.i2c: msm_bus_scale_register_client(mstr-id:84):0 (not a problem)
346[ 0.318661] i2c-msm-v2 75b6000.i2c: probing driver i2c-msm-v2
347[ 0.318757] AXI: msm_bus_scale_register_client(): msm_bus_scale_register_client: Bus driver not ready.
348[ 0.318778] i2c-msm-v2 75b6000.i2c: msm_bus_scale_register_client(mstr-id:84):0 (not a problem)
349[ 0.320400] i2c-msm-v2 7579000.i2c: probing driver i2c-msm-v2
350[ 0.320518] AXI: msm_bus_scale_register_client(): msm_bus_scale_register_client: Bus driver not ready.
351[ 0.320540] i2c-msm-v2 7579000.i2c: msm_bus_scale_register_client(mstr-id:86):0 (not a problem)
352[ 0.357466] KPI: Bootloader start count = 67494
353[ 0.357494] KPI: Bootloader end count = 266684
354[ 0.357507] KPI: Bootloader display count = 1752269751
355[ 0.357519] KPI: Bootloader load kernel count = 4471
356[ 0.357533] KPI: Kernel MPM timestamp = 288085
357[ 0.357544] KPI: Kernel MPM Clock frequency = 32768
358[ 0.357572] socinfo_print: v0.11, id=246, ver=3.1, raw_id=2375, raw_ver=4, hw_plat=1, hw_plat_ver=65536
359[ 0.357851] gdsc_mmagic_bimc: no parameters
360[ 0.358608] rome_vreg: no parameters
361[ 0.358958] wlan_en_vreg: no parameters
362[ 0.359471] vreg_5p0: no parameters
363[ 0.359686] dummy_vreg: no parameters
364[ 0.360435] vbat_disp: no parameters
365[ 0.361150] vdd3_disp: no parameters
366[ 0.361207] vdd3_disp: supplied by pm8994_s4
367[ 0.361735] vgaarb: loaded
368[ 0.362915] SCSI subsystem initialized
369[ 0.363957] usbcore: registered new interface driver usbfs
370[ 0.364012] usbcore: registered new interface driver hub
371[ 0.364184] usbcore: registered new device driver usb
372[ 0.364577] soc:usb_nop_phy supply vcc not found, using dummy regulator
373[ 0.365251] media: Linux media interface: v0.10
374[ 0.365305] Linux video capture interface: v2.00
375[ 0.387422] cpufreq: driver msm up and running
376[ 0.388008] platform soc:qcom,ion:qcom,ion-heap@22: assigned reserved memory node adsp_region
377[ 0.388212] platform soc:qcom,ion:qcom,ion-heap@27: assigned reserved memory node qseecom_region
378[ 0.388383] platform soc:qcom,ion:qcom,ion-heap@10: assigned reserved memory node secure_region
379[ 0.388718] ION heap system created
380[ 0.388823] ION heap adsp created at 0x00000000ff800000 with size 400000
381[ 0.388835] ION heap qsecom created at 0x00000000fe400000 with size 1400000
382[ 0.388846] ION heap secure_display created at 0x00000000f8800000 with size 5c00000
383[ 0.388856] ION heap secure_heap created
384[ 0.389612] msm_bus_fabric_init_driver
385[ 0.392649] msm-bus-type fab-a0noc: Error: Failed to get regulator bus-gdsc:-517
386[ 0.392668] msm-bus-type fab-a0noc: Error: Failed to get regulator bus-a-gdsc:-517
387[ 0.395460] msm-bus-type slv-vmem-cfg: Error: Failed to get regulator node-gdsc:-517
388[ 0.395915] msm-bus-type slv-vmem: Error: Failed to get regulator node-gdsc:-517
389[ 0.401361] msm-bus-type fab-a0noc: Error: Failed to get regulator aggre0-snoc-axi-no-rate:-517
390[ 0.401377] msm-bus-type fab-a0noc: Error: Failed to get regulator aggre0-snoc-axi-no-rate:-517
391[ 0.401391] msm-bus-type fab-a0noc: Error: Failed to get regulator aggre0-snoc-axi-no-rate:-517
392[ 0.401501] msm-bus-type fab-mnoc: Error: Failed to get regulator mmagic-mdss-axi-no-rate:-517
393[ 0.401527] msm-bus-type fab-mnoc: Error: Failed to get regulator mmagic-mdss-axi-no-rate:-517
394[ 0.401550] msm-bus-type fab-mnoc: Error: Failed to get regulator mmagic-mdss-axi-no-rate:-517
395[ 0.401573] msm-bus-type fab-mnoc: Error: Failed to get regulator mmagic-mdss-axi-no-rate:-517
396[ 0.401596] msm-bus-type fab-mnoc: Error: Failed to get regulator mmagic-mdss-axi-no-rate:-517
397[ 0.401619] msm-bus-type fab-mnoc: Error: Failed to get regulator mmagic-mdss-axi-no-rate:-517
398[ 0.401642] msm-bus-type fab-mnoc: Error: Failed to get regulator mmagic-mdss-axi-no-rate:-517
399[ 0.403010] qcom,qpnp-power-on qpnp-power-on-2: PMIC@SID0 Power-on reason: Triggered from Hard Reset and 'warm' boot
400[ 0.403036] qcom,qpnp-power-on qpnp-power-on-2: PMIC@SID0: Power-off reason: Triggered from KPDPWR_AND_RESIN (Simultaneous power key and reset line)
401[ 0.403174] input: qpnp_pon as /devices/virtual/input/input0
402[ 0.403626] pon_spare_reg: no parameters
403[ 0.403675] qcom,qpnp-power-on qpnp-power-on-12: No PON config. specified
404[ 0.403733] qcom,qpnp-power-on qpnp-power-on-12: PMIC@SID2 Power-on reason: Triggered from PON1 (secondary PMIC) and 'warm' boot
405[ 0.403751] qcom,qpnp-power-on qpnp-power-on-12: PMIC@SID2: Power-off reason: Triggered from PS_HOLD (PS_HOLD/MSM controlled shutdown)
406[ 0.403901] PMIC@SID0: PM8994 v2.0 options: 0, 0, 2, 2
407[ 0.403990] PMIC@SID2: PMI8996 v1.1 options: 0, 0, 0, 0
408[ 0.405073] ipa ipa2_uc_state_check:296 uC interface not initialized
409[ 0.405088] ipa ipa_sps_irq_control_all:938 EP (2) not allocated.
410[ 0.405095] ipa ipa_sps_irq_control_all:938 EP (5) not allocated.
411[ 0.406999] sps:BAM 0x0000000000684000 is registered.
412[ 0.407760] ipa ipa2_uc_state_check:296 uC interface not initialized
413[ 0.407985] sps:BAM 0x0000000000684000 (va:0xffffff8001540000) enabled: ver:0x27, number of pipes:20
414[ 0.409358] ipa ipa2_uc_state_check:296 uC interface not initialized
415[ 0.415138] ipa ipa2_uc_state_check:296 uC interface not initialized
416[ 0.417062] IPA driver initialization was successful.
417[ 0.418434] gdsc_mmagic_video: no parameters
418[ 0.418659] gdsc_mmagic_mdss: no parameters
419[ 0.418836] gdsc_mmagic_camss: no parameters
420[ 0.419052] gdsc_venus: no parameters
421[ 0.419075] gdsc_venus: supplied by gdsc_mmagic_video
422[ 0.419269] gdsc_venus_core0: fast normal
423[ 0.419412] gdsc_venus_core1: fast normal
424[ 0.419606] gdsc_camss_top: no parameters
425[ 0.419625] gdsc_camss_top: supplied by gdsc_mmagic_camss
426[ 0.419787] gdsc_vfe0: no parameters
427[ 0.419807] gdsc_vfe0: supplied by gdsc_camss_top
428[ 0.419987] gdsc_vfe1: no parameters
429[ 0.420008] gdsc_vfe1: supplied by gdsc_camss_top
430[ 0.420277] gdsc_mdss: no parameters
431[ 0.420297] gdsc_mdss: supplied by gdsc_mmagic_mdss
432[ 0.420565] gdsc_jpeg: no parameters
433[ 0.420584] gdsc_jpeg: supplied by gdsc_camss_top
434[ 0.420764] gdsc_cpp: no parameters
435[ 0.420790] gdsc_cpp: supplied by gdsc_camss_top
436[ 0.420957] gdsc_pcie_0: no parameters
437[ 0.421097] gdsc_pcie_1: no parameters
438[ 0.421228] gdsc_pcie_2: no parameters
439[ 0.421391] gdsc_usb30: no parameters
440[ 0.421529] gdsc_ufs: no parameters
441[ 0.421730] gdsc_fd: no parameters
442[ 0.421750] gdsc_fd: supplied by gdsc_camss_top
443[ 0.421916] gdsc_gpu: no parameters
444[ 0.422130] gdsc_gpu_gx: no parameters
445[ 0.422507] gdsc_gpu_gx: supplied by gfx_corner
446[ 0.422705] gdsc_hlos1_vote_aggre0_noc: no parameters
447[ 0.422849] gdsc_hlos1_vote_lpass_adsp: no parameters
448[ 0.422982] gdsc_hlos1_vote_lpass_core: no parameters
449[ 0.423143] gdsc_aggre0_noc: no parameters
450[ 0.425604] mdss_pll_probe: MDSS pll label = MDSS DSI 0 PLL
451[ 0.425637] mdss_pll_probe: mdss_pll_probe: label=MDSS DSI 0 PLL PLL SSC enabled
452[ 0.427994] dsi_pll_clock_register_8996: Registered DSI PLL ndx=0 clocks successfully
453[ 0.428083] mdss_pll_probe: MDSS pll label = MDSS DSI 1 PLL
454[ 0.428094] mdss_pll_probe: mdss_pll_probe: label=MDSS DSI 1 PLL PLL SSC enabled
455[ 0.429186] pll_is_pll_locked_8996: DSI PLL ndx=1 status=0 failed to Lock
456[ 0.429760] dsi_pll_clock_register_8996: Registered DSI PLL ndx=1 clocks successfully
457[ 0.429797] mdss_pll_probe: MDSS pll label = MDSS HDMI PLL
458[ 0.429807] mdss_pll_probe: Unable to get the cell-index rc=-22
459[ 0.560872] Advanced Linux Sound Architecture Driver Initialized.
460[ 0.561671] Bluetooth: ffffffc0f98a3d20
461[ 0.561705] NET: Registered protocol family 31
462[ 0.561718] Bluetooth: ffffffc0f98a3d20
463[ 0.561732] Bluetooth: ffffffc0f98a3d00Bluetooth: ffffffc0f98a3cd0Bluetooth: ffffffc0f98a3ce0
464[ 0.562145] cfg80211: Calling CRDA to update world regulatory domain
465[ 0.562185] cfg80211: World regulatory domain updated:
466[ 0.562195] cfg80211: DFS Master region: unset
467[ 0.562204] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
468[ 0.562222] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
469[ 0.562232] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
470[ 0.562241] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A, 2000 mBm), (N/A)
471[ 0.562251] cfg80211: (5170000 KHz - 5250000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A)
472[ 0.562260] cfg80211: (5250000 KHz - 5330000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A)
473[ 0.562269] cfg80211: (5490000 KHz - 5710000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A)
474[ 0.562279] cfg80211: (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A)
475[ 0.562288] cfg80211: (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm), (N/A)
476[ 0.562532] pcie:pcie_init.
477[ 0.565850] 608000.qcom,pcie supply vreg-3.3 not found, using dummy regulator
478[ 0.568662] msm_pcie_get_resources: PCIe: RC1 can't get tcsr resource.
479[ 0.571849] Switched to clocksource arch_sys_counter
480[ 0.609315] bcl_peripheral:bcl_perph_init BCL Initialized
481[ 0.614709] NET: Registered protocol family 2
482[ 0.615392] TCP established hash table entries: 32768 (order: 6, 262144 bytes)
483[ 0.615482] TCP bind hash table entries: 32768 (order: 7, 524288 bytes)
484[ 0.615810] TCP: Hash tables configured (established 32768 bind 32768)
485[ 0.615981] TCP: reno registered
486[ 0.615999] UDP hash table entries: 2048 (order: 4, 65536 bytes)
487[ 0.616024] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
488[ 0.616387] NET: Registered protocol family 1
489[ 0.616450] PCI: CLS 0 bytes, default 64
490[ 0.617017] Trying to unpack rootfs image as initramfs...
491[ 0.632682] Freeing initrd memory: 820K (ffffffc002c00000 - ffffffc002ccd000)
492[ 0.634931] kryo perfevents: CPU pmu for kryo-pmuv3 detected
493[ 0.640556] futex hash table entries: 1024 (order: 4, 65536 bytes)
494[ 0.640664] Initialise system trusted keyring
495[ 0.641245] vmscan: error setting kswapd cpu affinity mask
496[ 0.644293] VFS: Disk quotas dquot_6.5.2
497[ 0.644398] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
498[ 0.645211] exFAT: Version 1.2.9
499[ 0.645695] Registering esdfs 0.2
500[ 0.645849] fuse init (API version 7.23)
501[ 0.646201] msgmni has been set to 7409
502[ 0.648204] Key type asymmetric registered
503[ 0.648227] Asymmetric key parser 'x509' registered
504[ 0.648240] Key type pkcs7_test registered
505[ 0.648388] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 246)
506[ 0.648405] io scheduler noop registered
507[ 0.648415] io scheduler deadline registered
508[ 0.648480] io scheduler cfq registered (default)
509[ 0.648546] io scheduler bfq registered
510[ 0.648557] BFQ I/O-scheduler: v7r8
511[ 0.661184] mdss_mdp_irq_clk_register: unable to get clk: lut_clk
512[ 0.662538] No change in context(0==0), skip
513[ 0.663689] mdss_mdp_pipe_addr_setup: type:0 ftchid:-1 xinid:0 num:0 rect:0 ndx:0x1 prio:0
514[ 0.663701] mdss_mdp_pipe_addr_setup: type:0 ftchid:-1 xinid:4 num:1 rect:0 ndx:0x2 prio:1
515[ 0.663709] mdss_mdp_pipe_addr_setup: type:0 ftchid:-1 xinid:8 num:2 rect:0 ndx:0x4 prio:2
516[ 0.663717] mdss_mdp_pipe_addr_setup: type:0 ftchid:-1 xinid:12 num:8 rect:0 ndx:0x100 prio:3
517[ 0.663741] mdss_mdp_pipe_addr_setup: type:1 ftchid:-1 xinid:1 num:3 rect:0 ndx:0x8 prio:4
518[ 0.663751] mdss_mdp_pipe_addr_setup: type:1 ftchid:-1 xinid:5 num:4 rect:0 ndx:0x10 prio:5
519[ 0.663759] mdss_mdp_pipe_addr_setup: type:1 ftchid:-1 xinid:9 num:5 rect:0 ndx:0x20 prio:6
520[ 0.663768] mdss_mdp_pipe_addr_setup: type:1 ftchid:-1 xinid:13 num:9 rect:0 ndx:0x200 prio:7
521[ 0.663786] mdss_mdp_pipe_addr_setup: type:2 ftchid:-1 xinid:2 num:6 rect:0 ndx:0x40 prio:8
522[ 0.663795] mdss_mdp_pipe_addr_setup: type:2 ftchid:-1 xinid:10 num:7 rect:0 ndx:0x80 prio:9
523[ 0.663814] mdss_mdp_pipe_addr_setup: type:3 ftchid:-1 xinid:7 num:10 rect:0 ndx:0x400 prio:0
524[ 0.663823] mdss_mdp_pipe_addr_setup: type:3 ftchid:-1 xinid:7 num:11 rect:0 ndx:0x800 prio:1
525[ 0.663835] mdss_mdp_parse_dt_handler: Error from prop qcom,mdss-pipe-sw-reset-off : u32 array read
526[ 0.663910] mdss_mdp_parse_dt_handler: Error from prop qcom,mdss-ib-factor-overlap : u32 array read
527[ 0.664277] xlog_status: enable:0, panic:1, dump:2
528[ 0.664497] OF: no ranges; cannot translate
529[ 0.664512] OF: no ranges; cannot translate
530[ 0.665165] OF: no ranges; cannot translate
531[ 0.665178] OF: no ranges; cannot translate
532[ 0.665320] OF: no ranges; cannot translate
533[ 0.665333] OF: no ranges; cannot translate
534[ 0.665462] OF: no ranges; cannot translate
535[ 0.665474] OF: no ranges; cannot translate
536[ 0.665650] mdss_mdp_probe: mdss version = 0x10070002, bootloader display is on, num 1, intf_sel=0x00000100
537[ 0.671097] mdss_smmu_probe: iommu v2 domain[0] mapping and clk register successful!
538[ 0.671320] mdss_smmu_probe: iommu v2 domain[1] mapping and clk register successful!
539[ 0.671452] mdss_smmu_probe: iommu v2 domain[2] mapping and clk register successful!
540[ 0.671592] mdss_smmu_probe: iommu v2 domain[3] mapping and clk register successful!
541[ 0.674314] mdss_dsi_ctrl_probe: DSI Ctrl name = MDSS DSI CTRL->0
542[ 0.674602] mdss_panel_parse_panel_config_dt: BL: panel=mipi_mot_cmd_smd_QHD_546_g, manufacture_id(0xDA)= 0xB3 controller_ver(0xDB)= 0x55 controller_drv_ver(0XDC)= 0x28, full=0x00000000002855B3
543[ 0.674619] mdss_dsi_find_panel_of_node: cmdline:0:qcom,mdss_dsi_mot_smd_546_QHD_g_cmd_v0 panel_name:qcom,mdss_dsi_mot_smd_546_QHD_g_cmd_v0
544[ 0.674638] mdss_dsi_panel_init: Panel Name = mipi_mot_cmd_smd_QHD_546_g
545[ 0.674730] mdss_dsi_panel_timing_from_dt: found new timing "qcom,mdss_dsi_mot_smd_546_QHD_g_cmd_v0" (ffffffc0f98a3350)
546[ 0.674753] mdss_dsi_parse_dcs_cmds: failed, key=qcom,mdss-dsi-post-panel-on-command
547[ 0.674763] mdss_dsi_parse_dcs_cmds: failed, key=qcom,mdss-dsi-timing-switch-command
548[ 0.674772] mdss_dsi_panel_get_dsc_cfg_np: cannot find dsc config node:
549[ 0.674787] mdss_dsi_parse_topology_config: cfg_node name config0 lm_split:0x0 pp_split:no
550[ 0.674869] mdss_dsi_parse_panel_features: partial_update_enabled=1
551[ 0.674882] mdss_dsi_parse_panel_features: ulps feature disabled
552[ 0.674892] mdss_dsi_parse_panel_features: ulps during suspend feature disabled
553[ 0.674901] mdss_dsi_parse_dms_config: dynamic switch feature enabled: 0
554[ 0.674979] mdss_panel_parse_param_prop: HBM feature enabled with 2 dt cmds
555[ 0.674986] mdss_panel_parse_param_prop: HBM type = 0
556[ 0.675005] mdss_panel_parse_param_prop: ACL feature enabled with 2 dt cmds
557[ 0.675682] mdss_dsi_parse_gpio_params: bklt_en gpio not specified
558[ 0.675740] msm_dss_get_res_byname: 'dsi_phy_regulator' resource not found
559[ 0.675764] mdss_dsi_retrieve_ctrl_resources+0x164/0x1d4->msm_dss_ioremap_byname: 'dsi_phy_regulator' msm_dss_get_res_byname failed
560[ 0.675775] mdss_dsi_retrieve_ctrl_resources: ctrl_base=ffffff800184a000 ctrl_size=400 phy_base=ffffff800184c400 phy_size=588
561[ 0.675983] dsi_panel_device_register: Continuous splash enabled
562[ 0.676600] mdss_register_panel: adding framebuffer device 994000.qcom,mdss_dsi_ctrl0
563[ 0.677801] mdss_dsi_ctrl_probe: Dsi Ctrl->0 initialized, DSI rev:0x10040001, PHY rev:0x2
564[ 0.678022] mdss_dsi_ctrl_probe: DSI Ctrl name = MDSS DSI CTRL->1
565[ 0.678032] mdss_dsi_pinctrl_init: failed to get pinctrl
566[ 0.678039] mdss_dsi_ctrl_probe: failed to get pin resources
567[ 0.678247] mdss_dsi_find_panel_of_node: controller 1: is not present in 0:qcom,mdss_dsi_mot_smd_546_QHD_g_cmd_v0
568[ 0.678261] mdss_dsi_panel_init: Panel Name = mipi_mot_dba_panel
569[ 0.678338] mdss_dsi_panel_timing_from_dt: found new timing "qcom,mdss_dsi_mot_dba_panel" (ffffffc0f98a3350)
570[ 0.678351] mdss_dsi_parse_dcs_cmds: failed, key=qcom,mdss-dsi-on-command
571[ 0.678360] mdss_dsi_parse_dcs_cmds: failed, key=qcom,mdss-dsi-post-panel-on-command
572[ 0.678368] mdss_dsi_parse_dcs_cmds: failed, key=qcom,mdss-dsi-timing-switch-command
573[ 0.678418] mdss_dsi_parse_dcs_cmds: failed, key=qcom,mdss-dsi-off-command
574[ 0.678433] mdss_dsi_parse_panel_features: ulps feature disabled
575[ 0.678441] mdss_dsi_parse_panel_features: ulps during suspend feature disabled
576[ 0.678451] mdss_dsi_parse_dms_config: dynamic switch feature enabled: 0
577[ 0.678464] mdss_dsi_parse_panel_features: ESD check disabled by bootloader panel config, bare_board = 0, esd_enable = 0
578[ 0.678504] mdss_dsi_parse_dcs_cmds: failed, key=qcom,mdss-dsi-lp-mode-on
579[ 0.678512] mdss_dsi_parse_dcs_cmds: failed, key=qcom,mdss-dsi-lp-mode-off
580[ 0.678653] mdss_dsi_parse_ctrl_params:3954 Unable to read qcom,display-id, data=0000000000000000,len=20
581[ 0.678666] mdss_dsi_parse_gpio_params:3988, TE gpio not specified
582[ 0.678673] mdss_dsi_parse_gpio_params: bklt_en gpio not specified
583[ 0.678681] mdss_dsi_parse_gpio_params:3999, reset gpio not specified
584[ 0.678709] msm_dss_get_res_byname: 'dsi_phy_regulator' resource not found
585[ 0.678728] mdss_dsi_retrieve_ctrl_resources+0x164/0x1d4->msm_dss_ioremap_byname: 'dsi_phy_regulator' msm_dss_get_res_byname failed
586[ 0.678737] mdss_dsi_retrieve_ctrl_resources: ctrl_base=ffffff8001850000 ctrl_size=400 phy_base=ffffff8001852400 phy_size=558
587[ 0.678762] dsi_panel_device_register: Continuous splash disabled
588[ 0.679225] mdss_register_panel: adding framebuffer device 996000.qcom,mdss_dsi_ctrl1
589[ 0.679440] panel_debug_register_base: debugfs_create_file: data_type fail
590[ 0.679731] mdss_dsi_ctrl_probe: Dsi Ctrl->1 initialized, DSI rev:0x10040001, PHY rev:0x2
591[ 0.681196] mdss_dsi_status_init: DSI status check interval:8000
592[ 0.682726] hdmi_tx_init_resource: 'core_physical': start = 0xffffff8001856000, len=0x50c
593[ 0.682742] hdmi_tx_init_resource: 'qfprom_physical': start = 0xffffff8001858000, len=0x6158
594[ 0.682835] hdmi_tx_init_resource: 'hdcp_physical': start = 0xffffff8001872000, len=0xfff
595[ 0.683931] mdss_register_panel: adding framebuffer device 9a0000.qcom,hdmi_tx
596[ 0.687099] mdss_fb_probe: fb0: split_mode:0 left:0 right:0
597[ 0.687695] mdss_fb_register: FrameBuffer[0] 1440x2560 registered successfully!
598[ 0.688863] mdss_fb_probe: fb1: split_mode:0 left:0 right:0
599[ 0.689330] mdss_fb_register: FrameBuffer[1] 854x480 registered successfully!
600[ 0.689451] mdss_mdp_splash_parse_dt: splash mem child node is not present
601[ 0.689484] mdss_fb_probe: fb2: split_mode:0 left:0 right:0
602[ 0.689580] mdss_fb_register: FrameBuffer[2] 640x480 registered successfully!
603[ 0.689910] input: HDMI CEC User or Deck Control as /devices/virtual/input/input1
604[ 0.695442] mdss_mdp_kcal_store_fb0_ctl panel name mipi_mot_cmd_smd_QHD_546_g
605[ 0.695479] mdss_mdp_kcal_store_fb0_ctl panel found...
606[ 0.695528] kcal_ctrl_init: registered
607[ 0.703071] smd_channel_probe_now: allocation table not initialized
608[ 0.712656] In memshare_probe, Memshare probe success
609[ 0.718646] l2cache-pmu soc:l2-pmu: Registered L2 cache PMU using 2 HW PMUs
610[ 0.719605] msm_rpm_log_probe: OK
611[ 0.723497] subsys-pil-tz ce0000.qcom,venus: for venus segments only will be dumped.
612[ 0.724459] subsys-pil-tz soc:qcom,kgsl-hyp: for a530_zap segments only will be dumped.
613[ 0.727486] pil-q6v5-mss 2080000.qcom,mss: Failed to find the pas_id.
614[ 0.730683] input: qbt1000_key_input as /devices/virtual/input/input2
615[ 0.730754] i2c-msm-v2 75b5000.i2c: msm_bus_scale_register_client(mstr-id:84):0xa (ok)
616[ 0.731187] ANX7816 slimport_chip_detect : CHIPID: ANX7816
617[ 0.731853] mmi_unit_info (SMEM) for modem: version = 0x03, device = 'sheridan', radio = 0x0, radio_str = 'ROW', system_rev = 0x83b0, system_serial = 0xf8f514af00000000, machine = '', barcode = 'ZY223LT4KZ', baseband = '', carrier = 'reteu', pu_reason = 0x00008000
618[ 0.731980] mmi_storage_info :UFS: 32GB SAMSUNG KLUBG4G1CE-B0B1 FV=0800
619[ 0.734140] uart_tx_gpio is not available
620[ 0.734167] uart_rx_gpio is not available
621[ 0.734175] uart_cts_gpio is not available
622[ 0.734181] uart_rfr_gpio is not available
623[ 0.734501] smd_channel_probe_now: allocation table not initialized
624[ 0.735066] sps: BAM device 0x0000000007544000 is not registered yet.
625[ 0.735234] sps:BAM 0x0000000007544000 is registered.
626[ 0.735611] mod_display_register_impl: Registered impl for type: 2
627[ 0.735687] i2c-core: driver [anx7816] using legacy suspend method
628[ 0.735698] i2c-core: driver [anx7816] using legacy resume method
629[ 0.736763] 7570000.uart: ttyHS0 at MMIO 0x7570000 (irq = 19, base_baud = 460800) is a MSM HS UART
630[ 0.738824] uart_tx_gpio is not available
631[ 0.738843] uart_rx_gpio is not available
632[ 0.738850] uart_cts_gpio is not available
633[ 0.738856] uart_rfr_gpio is not available
634[ 0.740388] sps: BAM device 0x0000000007584000 is not registered yet.
635[ 0.740567] sps:BAM 0x0000000007584000 is registered.
636[ 0.741812] 75b3000.uart: ttyHS5 at MMIO 0x75b3000 (irq = 419, base_baud = 460800) is a MSM HS UART
637[ 0.743078] msm_serial_hs module loaded
638[ 0.767168] brd: module loaded
639[ 0.768680] loop: module loaded
640[ 0.768919] zram: Added device: zram0
641[ 0.770074] QSEECOM: qseecom_probe: qseecom.qsee_version = 0x1000000
642[ 0.770123] QSEECOM: qseecom_retrieve_ce_data: Device does not support PFE
643[ 0.770135] QSEECOM: qseecom_probe: no-clock-support=0x1
644[ 0.770145] QSEECOM: qseecom_probe: qseecom.qsee_reentrancy_support = 2
645[ 0.770636] scm_call failed: func id 0x70000006, ret: -1, syscall returns: 0x0, 0x0, 0x0
646[ 0.770646] QSEECOM: qseecom_probe: qseecom.whitelist_support = 0
647[ 0.774189] alsa-to-h2w soc:alsa_to_h2w: alsa_to_h2w_probe success
648[ 0.775477] motosh 5-0043: probe begun
649[ 0.776242] motosh 5-0043: motosh_gpio_init: wake_response currently unused
650[ 0.777046] input: sensorprocessor as /devices/virtual/input/input3
651[ 0.777110] motosh 5-0043: probe finished
652[ 0.777763] fusb302 7-0022: fusb30x_probe
653[ 0.778825] fusb_InitializeGPIO - Warning: Could not get GPIO for Debug GPIO! Error code: -2
654[ 0.784736] fusb302 7-0022: FUSB fusb30x_probe - FUSB30X Driver loaded successfully!
655[ 0.787099] hd3ss460 soc:hd3ss460: USB supply not found, deferring probe
656[ 0.787500] usb3813 7-002d: USB supply not found, deferring probe
657[ 0.789208] greybus: Registered control protocol v0.1.
658[ 0.789235] greybus: Registered svc protocol v0.1.
659[ 0.789242] greybus: Registered firmware protocol v0.1.
660[ 0.789254] greybus: Registered gb_audio_mgmt protocol v0.3.
661[ 0.789262] greybus: Registered gb_mods_audio protocol v0.3.
662[ 0.789272] greybus: Registered battery protocol v0.1.
663[ 0.789280] greybus: Registered lights protocol v0.1.
664[ 0.789290] greybus: Registered hid protocol v0.1.
665[ 0.789321] greybus: Registered raw protocol v0.1.
666[ 0.794691] muc soc:muc: probed finished
667[ 0.796184] _mods_create_dl_device for soc:muc_svc@0 [0]
668[ 0.796319] muc_attach_state: val = 0 intr = 0 b+fault = 0
669[ 0.797456] _mods_create_dl_device for mods_ap [1]
670[ 0.797633] muc_svc soc:muc_svc@0: VERSION: 0.1
671[ 0.802492] muc_attach_state: val = 0 intr = 0 b+fault = 0
672[ 0.802608] apba_firmware_callback: no firmware available
673[ 0.805276] mods_uart soc:mod_uart: mods_uart_probe: Using ttyHS5
674[ 0.805608] greybus: Registered vendor-moto protocol v0.3.
675[ 0.805621] greybus: Registered ptp protocol v0.3.
676[ 0.807227] greybus: Registered camera_ext protocol v1.1.
677[ 0.807282] greybus: Registered display protocol v0.2.
678[ 0.807293] greybus: Registered usb-ext protocol v0.1.
679[ 0.807302] greybus: Registered sensors-ext protocol v0.2.
680[ 0.807394] i2c-core: driver [tabla-i2c-core] using legacy suspend method
681[ 0.807401] i2c-core: driver [tabla-i2c-core] using legacy resume method
682[ 0.807461] i2c-core: driver [wcd9xxx-i2c-core] using legacy suspend method
683[ 0.807468] i2c-core: driver [wcd9xxx-i2c-core] using legacy resume method
684[ 0.807522] i2c-core: driver [tasha-i2c-core] using legacy suspend method
685[ 0.807529] i2c-core: driver [tasha-i2c-core] using legacy resume method
686[ 0.809441] Loading pn544 driver
687[ 0.810359] nfc: failed to get nfc_clk
688[ 0.810630] 7-0028 supply vdd not found, using dummy regulator
689[ 0.812312] qce 660000.qcedev: Qualcomm Crypto 5.3.1 device found @0x660000
690[ 0.812340] qce 660000.qcedev: CE device = 0x0
691[ 0.812554] sps:BAM 0x0000000000644000 is registered.
692[ 0.812786] sps:BAM 0x0000000000644000 (va:0xffffff80033c0000) enabled: ver:0x27, number of pipes:16
693[ 0.812808] sps:BAM 0x0000000000644000 pipe 3 sharing violation
694[ 0.812819] sps:Failed to connect BAM 0xffffffc075f76c00 pipe 3
695[ 0.812835] QCE50: qce_sps_init_ep_conn: sps_connect() fail pipe_handle=0xffffffc075f77000, rc = -1
696[ 0.812861] sps:De-init client in connected state: 0x1535053
697[ 0.812976] qce: probe of 660000.qcedev failed with error -1
698[ 0.815502] qcrypto 660000.qcrypto: Qualcomm Crypto 5.3.1 device found @0x660000
699[ 0.815536] qcrypto 660000.qcrypto: CE device = 0x0
700[ 0.815738] sps:BAM 0x0000000000644000 is registered.
701[ 0.815920] sps:BAM 0x0000000000644000 (va:0xffffff8003480000) enabled: ver:0x27, number of pipes:16
702[ 0.816197] QCE50: qce_sps_init: Qualcomm MSM CE-BAM at 0x0000000000644000 irq 159
703[ 0.822121] qcrypto 660000.qcrypto: qcrypto-ecb-aes
704[ 0.822238] qcrypto 660000.qcrypto: qcrypto-cbc-aes
705[ 0.822342] qcrypto 660000.qcrypto: qcrypto-ctr-aes
706[ 0.822423] qcrypto 660000.qcrypto: qcrypto-ecb-des
707[ 0.822528] qcrypto 660000.qcrypto: qcrypto-cbc-des
708[ 0.822603] qcrypto 660000.qcrypto: qcrypto-ecb-3des
709[ 0.822681] qcrypto 660000.qcrypto: qcrypto-cbc-3des
710[ 0.822762] qcrypto 660000.qcrypto: qcrypto-xts-aes
711[ 0.822874] qcrypto 660000.qcrypto: qcrypto-sha1
712[ 0.822949] qcrypto 660000.qcrypto: qcrypto-sha256
713[ 0.823023] qcrypto 660000.qcrypto: qcrypto-aead-hmac-sha1-cbc-aes
714[ 0.823108] qcrypto 660000.qcrypto: qcrypto-aead-hmac-sha1-cbc-des
715[ 0.823185] qcrypto 660000.qcrypto: qcrypto-aead-hmac-sha1-cbc-3des
716[ 0.823258] qcrypto 660000.qcrypto: qcrypto-aead-hmac-sha256-cbc-aes
717[ 0.823337] qcrypto 660000.qcrypto: qcrypto-aead-hmac-sha256-cbc-des
718[ 0.823482] qcrypto 660000.qcrypto: qcrypto-aead-hmac-sha256-cbc-3des
719[ 0.823570] qcrypto 660000.qcrypto: qcrypto-hmac-sha1
720[ 0.823691] qcrypto 660000.qcrypto: qcrypto-hmac-sha256
721[ 0.823773] qcrypto 660000.qcrypto: qcrypto-aes-ccm
722[ 0.823853] qcrypto 660000.qcrypto: qcrypto-rfc4309-aes-ccm
723[ 0.826794] ICE IRQ = 31
724[ 0.827055] qcom_ice_get_device_tree_data: No vdd-hba-supply regulator, assuming not needed
725[ 0.827125] ICE IRQ = 32
726[ 0.832247] qcom_ice_get_pdevice: found ice device ffffffc0f655a200
727[ 0.832279] qcom_ice_get_pdevice: matching platform device ffffffc0f826dc00
728[ 0.832692] scm_call failed: func id 0x42000c02, ret: -2, syscall returns: 0xfffffffffffffffc, 0x0, 0x0
729[ 0.833318] ufs_qcom_phy_qmp_14nm 627000.ufsphy: failed to get tx_iface_clk err -2
730[ 0.833331] ufs_qcom_phy_qmp_14nm 627000.ufsphy: failed to get rx_iface_clk err -2
731[ 0.834339] scsi host0: ufshcd
732[ 0.837993] qcom_ice 630000.ufsice: QC ICE 2.1.44 device found @0xffffff8002060000
733[ 0.845120] SCSI Media Changer driver v0.25
734[ 0.849498] sps:BAM 0x0000000007584000 (va:0xffffff80022c0000) enabled: ver:0x19, number of pipes:24
735[ 0.851261] arizona spi9.0: Mandatory DT gpio wlf,ldoena missing/malformed: -2
736[ 0.851418] LDO1: at 1200 mV
737[ 0.862635] ufshcd 624000.ufshc: ufshcd_print_pwr_info:[RX, TX]: gear=[1, 1], lane[1, 1], pwr[SLOWAUTO_MODE, SLOWAUTO_MODE], rate = 0
738[ 0.890772] arizona spi9.0: WM5110 revision G
739[ 0.892068] arizona spi9.0: Unbalanced pm_runtime_enable!
740[ 0.894301] MICVDD: 900 <--> 3300 mV at 2500 mV
741[ 0.894456] MICVDD: supplied by pm8994_s4
742[ 0.894641] Adding alias for supply MICVDD,(null) -> MICVDD,spi9.0
743[ 0.895378] Adding alias for supply MICVDD,(null) -> MICVDD,spi9.0
744[ 0.895395] Adding alias for supply DBVDD2,(null) -> DBVDD2,spi9.0
745[ 0.895405] Adding alias for supply DBVDD3,(null) -> DBVDD3,spi9.0
746[ 0.895415] Adding alias for supply CPVDD,(null) -> CPVDD,spi9.0
747[ 0.895426] Adding alias for supply SPKVDDL,(null) -> SPKVDDL,spi9.0
748[ 0.895435] Adding alias for supply SPKVDDR,(null) -> SPKVDDR,spi9.0
749[ 0.899611] spi_qsd 75ba000.spi: init_resources: unable to get core_clk
750[ 0.900522] Ethernet Channel Bonding Driver: v3.7.1 (April 27, 2011)
751[ 0.901961] tun: Universal TUN/TAP device driver, 1.6
752[ 0.902008] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
753[ 0.902286] PPP generic driver version 2.4.2
754[ 0.902480] PPP BSD Compression module registered
755[ 0.902498] PPP Deflate Compression module registered
756[ 0.902543] PPP MPPE Compression module registered
757[ 0.902559] NET: Registered protocol family 24
758[ 0.902611] Context not found
759[ 0.979868] PCI host bridge /soc/qcom,pcie@00608000 ranges:
760[ 0.979913] No bus range found for /soc/qcom,pcie@00608000, using [bus 00-ff]
761[ 0.979943] IO 0x0d200000..0x0d2fffff -> 0x0d200000
762[ 0.979960] MEM 0x0d300000..0x0dffffff -> 0x0d300000
763[ 0.990217] pci-msm 608000.qcom,pcie: PCI host bridge to bus 0001:00
764[ 0.990242] pci_bus 0001:00: root bus resource [bus 00-ff]
765[ 0.990255] pci_bus 0001:00: root bus resource [io 0x0000-0xfffff] (bus address [0xd200000-0xd2fffff])
766[ 0.990267] pci_bus 0001:00: root bus resource [mem 0x0d300000-0x0dffffff]
767[ 0.990353] pci 0001:00:00.0: [17cb:0104] type 01 class 0x060400
768[ 0.990485] msm_pcie_oper_conf: Read of RC1 0:0x00 + 0x0014[4] is all FFs
769[ 0.990504] pci 0001:00:00.0: reg 0x10: [mem 0x00000000-0x00000fff 64bit]
770[ 0.990566] pci 0001:00:00.0: IOMMU is currently not supported for PCI
771[ 0.990675] pci 0001:00:00.0: PME# supported from D0 D3hot D3cold
772[ 0.990729] pci 0001:00:00.0: of_irq_parse_pci() failed with rc=-19
773[ 0.991008] pci 0001:00:00.0: bridge configuration invalid ([bus 00-00]), reconfiguring
774[ 0.991291] pci 0001:01:00.0: [168c:003e] type 00 class 0x028000
775[ 0.991467] msm_pcie_oper_conf: Read of RC1 1:0x00 + 0x0014[4] is all FFs
776[ 0.991486] pci 0001:01:00.0: reg 0x10: [mem 0x00000000-0x001fffff 64bit]
777[ 0.991673] pci 0001:01:00.0: IOMMU is currently not supported for PCI
778[ 0.991890] pci 0001:01:00.0: PME# supported from D0 D3hot D3cold
779[ 0.992542] pci_bus 0001:01: busn_res: [bus 01-ff] end is updated to 01
780[ 0.992668] msm_pcie_oper_conf: Read of RC1 0:0x00 + 0x0028[4] is all FFs
781[ 0.992706] pci 0001:00:00.0: BAR 8: assigned [mem 0x0d400000-0x0d5fffff]
782[ 0.992738] pci 0001:00:00.0: BAR 0: assigned [mem 0x0d300000-0x0d300fff 64bit]
783[ 0.992841] pci 0001:01:00.0: BAR 0: assigned [mem 0x0d400000-0x0d5fffff 64bit]
784[ 0.993124] pci 0001:00:00.0: PCI bridge to [bus 01]
785[ 0.993232] pci 0001:00:00.0: bridge window [mem 0x0d400000-0x0d5fffff]
786[ 0.995264] cnss soc:qcom,cnss: for AR6320 segments only will be dumped.
787[ 0.996391] cnss_probe: MAC1 from bootparams=68:C4:4D:9E:18:C2
788[ 0.996429] cnss_probe: MAC2 from boot params=68:C4:4D:9E:18:C3
789[ 1.015366] cnss: Platform driver probed successfully.
790[ 1.018855] pegasus: v0.9.3 (2013/04/25), Pegasus/Pegasus II USB Ethernet driver
791[ 1.018978] usbcore: registered new interface driver pegasus
792[ 1.019023] usbcore: registered new interface driver asix
793[ 1.019055] usbcore: registered new interface driver ax88179_178a
794[ 1.019099] usbcore: registered new interface driver cdc_ether
795[ 1.019130] usbcore: registered new interface driver net1080
796[ 1.019160] usbcore: registered new interface driver cdc_subset
797[ 1.019197] usbcore: registered new interface driver zaurus
798[ 1.019231] usbcore: registered new interface driver MOSCHIP usb-ethernet driver
799[ 1.019583] usbcore: registered new interface driver cdc_ncm
800[ 1.020552] msm_sharedmem: sharedmem_register_qmi: qmi init successful
801[ 1.023250] msm_sharedmem: msm_sharedmem_probe: Device created for client 'rmtfs'
802[ 1.031759] msm-dwc3 6a00000.ssusb: unable to get dbm device
803[ 1.031920] 7600000.hsusb supply USB3_GDSC not found, using dummy regulator
804[ 1.032879] msm-dwc3 7600000.hsusb: unable to read platform data tx fifo size
805[ 1.040375] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
806[ 1.040409] ehci-pci: EHCI PCI platform driver
807[ 1.040485] usbcore: registered new interface driver usb-storage
808[ 1.040507] usbcore: registered new interface driver ums-alauda
809[ 1.040526] usbcore: registered new interface driver ums-cypress
810[ 1.040545] usbcore: registered new interface driver ums-datafab
811[ 1.040564] usbcore: registered new interface driver ums-freecom
812[ 1.040582] usbcore: registered new interface driver ums-isd200
813[ 1.040604] usbcore: registered new interface driver ums-jumpshot
814[ 1.040623] usbcore: registered new interface driver ums-karma
815[ 1.040645] usbcore: registered new interface driver ums-sddr09
816[ 1.040664] usbcore: registered new interface driver ums-sddr55
817[ 1.040681] usbcore: registered new interface driver ums-usbat
818[ 1.040763] usbcore: registered new interface driver usbserial
819[ 1.040785] usbcore: registered new interface driver usb_ehset_test
820[ 1.041480] gbridge_init: gbridge_init successs.
821[ 1.041792] mousedev: PS/2 mouse device common for all mice
822[ 1.042177] usbcore: registered new interface driver xpad
823[ 1.044713] synaptics_dsx_dt_parse_modifiers: processing modifier config_modifier-aod[0]
824[ 1.044974] synaptics_dsx_i2c 8-0020: no valid patch sets found
825[ 1.044990] synaptics_dsx_dt_parse_modifiers: processing modifier config_modifier-fps[5]
826[ 1.044999] synaptics_dsx_dt_parse_modifiers: using fingerprint sensor detection
827[ 1.045009] synaptics_dsx_dt_parse_modifier: using touch clip area in fps-active
828[ 1.045166] synaptics_dsx_of_init: using gpio config
829[ 1.045418] 8-0020 supply vdd_quirk not found, using dummy regulator
830[ 1.058405] msm-dwc3 7600000.hsusb: DWC3 in low power mode
831[ 1.066097] i2c-msm-v2 75b6000.i2c: msm_bus_scale_register_client(mstr-id:84):0x14 (ok)
832[ 1.078743] synaptics_dsx_i2c 8-0020: synaptics_rmi4_cap_button_map: cap_button_map is NULL in board file
833[ 1.081092] synaptics_dsx_i2c 8-0020: F51 ctrl[0]=00
834[ 1.081102] synaptics_dsx_i2c 8-0020: F51 ctrl[4]=14
835[ 1.084923] input: synaptics_dsx_i2c as /devices/soc/75b6000.i2c/i2c-8/8-0020/input/input4
836[ 1.085076] synaptics_rmi4_query_device: Product: s3508sga, firmware id: 246de6, config id: 16071302
837[ 1.086057] synaptics_dsx_sensor_state: state change UNKNOWN -> STANDBY
838[ 1.086072] synaptics_dsx_sysfs_touchscreen: assigned minor 128
839[ 1.086193] synaptics_dsx_i2c 8-0020: Failed to register fps_notifier: -19
840[ 1.086203] ------------[ cut here ]------------
841[ 1.086228] WARNING: CPU: 3 PID: 1 at ../../../../../../kernel/motorola/msm8996/kernel/power/qos.c:626 pm_qos_add_request+0xf8/0x2bc()
842[ 1.086237] IRQ-308 not set for request with affinity flag
843[ 1.086250] CPU: 3 PID: 1 Comm: swapper/0 Not tainted 3.18.31-lineageOS #7
844[ 1.086257] Hardware name: Sheridan (DT)
845[ 1.086265] Call trace:
846[ 1.086279] [<ffffffc000088b04>] dump_backtrace+0x0/0x23c
847[ 1.086286] [<ffffffc000088d54>] show_stack+0x14/0x1c
848[ 1.086304] [<ffffffc000ed68a0>] dump_stack+0x88/0xac
849[ 1.086313] [<ffffffc0000a0e70>] warn_slowpath_common+0x88/0xb0
850[ 1.086320] [<ffffffc0000a0f14>] warn_slowpath_fmt+0x50/0x58
851[ 1.086328] [<ffffffc0000e7d00>] pm_qos_add_request+0xf8/0x2bc
852[ 1.086344] [<ffffffc000765e8c>] synaptics_rmi4_probe+0xf44/0x10c8
853[ 1.086357] [<ffffffc0007893b8>] i2c_device_probe+0xb8/0xec
854[ 1.086369] [<ffffffc00055ecd8>] driver_probe_device+0xd4/0x224
855[ 1.086376] [<ffffffc00055eed8>] __driver_attach+0x64/0x90
856[ 1.086388] [<ffffffc00055d518>] bus_for_each_dev+0x74/0x90
857[ 1.086394] [<ffffffc00055efc0>] driver_attach+0x20/0x28
858[ 1.086402] [<ffffffc00055dd74>] bus_add_driver+0xf0/0x1c0
859[ 1.086409] [<ffffffc00055f9b4>] driver_register+0x94/0xe0
860[ 1.086418] [<ffffffc00078a280>] i2c_register_driver+0x4c/0xac
861[ 1.086432] [<ffffffc0016fc40c>] synaptics_rmi4_init+0x1c/0x24
862[ 1.086447] [<ffffffc0016bbb1c>] do_one_initcall+0x188/0x1a4
863[ 1.086454] [<ffffffc0016bbcf8>] kernel_init_freeable+0x1c0/0x25c
864[ 1.086464] [<ffffffc000ed0c2c>] kernel_init+0x14/0xd4
865[ 1.086516] ---[ end trace 317bb328910270c3 ]---
866[ 1.089137] input: hbtp_vm as /devices/virtual/input/input5
867[ 1.090377] input: fpc1020 as /devices/virtual/input/input6
868[ 1.090493] fpc1020 spi12.0: fpc1020_probe: ok
869[ 1.091689] input: qwerty as /devices/virtual/input/input7
870[ 1.092060] hb_init hb done
871[ 1.092511] qcom,qpnp-rtc qpnp-rtc-8: rtc core: registered qpnp_rtc as rtc0
872[ 1.092553] Current shipmode info1 is 0x88d = 0x0
873[ 1.092585] Write shipmode info1 to 0x88d with 0x0
874[ 1.092795] ufshcd 624000.ufshc: ufshcd_print_pwr_info:[RX, TX]: gear=[3, 3], lane[1, 1], pwr[FAST MODE, FAST MODE], rate = 2
875[ 1.092831] i2c /dev entries driver
876[ 1.093528] scsi 0:0:0:49488: Well-known LUN SAMSUNG KLUBG4G1CE-B0B1 0800 PQ: 0 ANSI: 6
877[ 1.094888] scsi 0:0:0:49456: Well-known LUN SAMSUNG KLUBG4G1CE-B0B1 0800 PQ: 0 ANSI: 6
878[ 1.096061] scsi 0:0:0:49476: Well-known LUN SAMSUNG KLUBG4G1CE-B0B1 0800 PQ: 0 ANSI: 6
879[ 1.097436] scsi 0:0:0:0: Direct-Access SAMSUNG KLUBG4G1CE-B0B1 0800 PQ: 0 ANSI: 6
880[ 1.098214] scsi 0:0:0:1: Direct-Access SAMSUNG KLUBG4G1CE-B0B1 0800 PQ: 0 ANSI: 6
881[ 1.098668] scsi 0:0:0:2: Direct-Access SAMSUNG KLUBG4G1CE-B0B1 0800 PQ: 0 ANSI: 6
882[ 1.099094] scsi 0:0:0:3: Direct-Access SAMSUNG KLUBG4G1CE-B0B1 0800 PQ: 0 ANSI: 6
883[ 1.100434] sd 0:0:0:0: [sda] 16384-byte physical blocks
884[ 1.101160] sd 0:0:0:1: [sdb] 16384-byte physical blocks
885[ 1.102784] sd 0:0:0:2: [sdc] 16384-byte physical blocks
886[ 1.103105] sd 0:0:0:0: [sda] 16384-byte physical blocks
887[ 1.103470] sd 0:0:0:1: [sdb] 16384-byte physical blocks
888[ 1.105211] sd 0:0:0:2: [sdc] 16384-byte physical blocks
889[ 1.105975] sd 0:0:0:3: [sdd] 16384-byte physical blocks
890[ 1.106207] sda: sda1 sda2 sda3 sda4 sda5 sda6 sda7 sda8 sda9 sda10 sda11 sda12 sda13 sda14 sda15 sda16 sda17 sda18 sda19 sda20
891[ 1.107280] sdb: sdb1 sdb2 sdb3 sdb4 sdb5 sdb6 sdb7 sdb8 sdb9 sdb10 sdb11 sdb12 sdb13 sdb14 sdb15 sdb16 sdb17 sdb18 sdb19 sdb20 sdb21 sdb22 sdb23 sdb24
892[ 1.108020] sd 0:0:0:3: [sdd] 16384-byte physical blocks
893[ 1.109621] sdc: sdc1 sdc2 sdc3 sdc4 sdc5 sdc6 sdc7 sdc8 sdc9
894[ 1.110632] sdd: sdd1 sdd2
895[ 1.110869] sd 0:0:0:0: [sda] 16384-byte physical blocks
896[ 1.111704] sd 0:0:0:3: [sdd] 16384-byte physical blocks
897[ 1.112880] sd 0:0:0:2: [sdc] 16384-byte physical blocks
898[ 1.115215] sd 0:0:0:1: [sdb] 16384-byte physical blocks
899[ 1.131925] vmem: Up and running with 4 banks of memory from [??? 0xffffffc0f7c02838-0x00000000 flags 0xffffffc0f672c098]
900[ 1.155611] msm_eeprom_platform_probe failed 1718
901[ 1.156524] msm_eeprom_platform_probe failed 1718
902[ 1.171721] MSM-CPP cpp_init_hardware:863 CPP HW Version: 0x60000000
903[ 1.171759] MSM-CPP cpp_init_hardware:881 stream_cnt:0
904[ 1.186670] __msm_jpeg_init:1537] Jpeg Device id 0
905[ 1.187877] __msm_jpeg_init:1537] Jpeg Device id 2__msm_jpeg_init:1537] Jpeg Device id 3
906[ 1.193781] msm_fd_hw_set_dt_parms_by_name: Error property does not exist
907[ 1.293391] msm_fd aa4000.qcom,fd: Face detection halt timeout
908[ 1.294869] usbcore: registered new interface driver uvcvideo
909[ 1.294890] USB Video Class driver (1.1.1)
910[ 1.294899] gspca_main: v2.14.0 registered
911[ 1.295670] FG: fg_empty_soc_irq_handler: triggered 0x21
912[ 1.296819] FG: fg_power_get_property: ESR Bad: -22 mOhm
913[ 1.297471] FG: fg_power_get_property: ESR Bad: -22 mOhm
914[ 1.297567] FG: fg_probe: FG Probe success - FG Revision DIG:3.1 ANA:1.2 PMIC subtype=19
915[ 1.301094] qpnp-smbcharger qpnp-smbcharger-17: USB supply not found, deferring probe
916[ 1.303827] unable to find DT imem DLOAD mode node
917[ 1.305793] unable to find DT imem EDLOAD mode node
918[ 1.313143] lm75 7-0048: hwmon1: sensor 'tmp108'
919[ 1.314024] thermal thermal_zone1: failed to read out thermal zone 1
920[ 1.347365] device-mapper: uevent: version 1.0.3
921[ 1.347602] device-mapper: ioctl: 4.28.0-ioctl (2014-09-17) initialised: dm-devel@redhat.com
922[ 1.347724] device-mapper: req-crypt: dm-req-crypt successfully initalized.
923[ 1.347740] Bluetooth: ffffffc0f98a3d30
924[ 1.347749] Bluetooth: ffffffc0f98a3d10
925[ 1.349204] bt_power bt_qca6174: no qca,bt-vdd-core-voltage-level property
926[ 1.349354] bt_power bt_qca6174: no qca,bt-vdd-pa-voltage-level property
927[ 1.349365] bt_dt_parse_vreg_info: qca,bt-vdd-ldo: is not provided in device tree
928[ 1.349373] bt_dt_parse_vreg_info: qca,bt-chip-pwd: is not provided in device tree
929[ 1.350085] sdhci: Secure Digital Host Controller Interface driver
930[ 1.350101] sdhci: Copyright(c) Pierre Ossman
931[ 1.350110] sdhci-pltfm: SDHCI platform and OF driver helper
932[ 1.351220] qcom_ice_get_pdevice: found ice device ffffffc0f655a600
933[ 1.351239] qcom_ice_get_pdevice: matching platform device ffffffc0f826e000
934[ 1.355953] random: nonblocking pool is initialized
935[ 1.373869] sdhci_msm 74a4900.sdhci: sdhci_msm_probe: ICE device is not enabled
936[ 1.388378] sdhci_msm 74a4900.sdhci: No vmmc regulator found
937[ 1.388414] sdhci_msm 74a4900.sdhci: No vqmmc regulator found
938[ 1.388912] mmc0: SDHCI controller on 74a4900.sdhci [74a4900.sdhci] using 64-bit ADMA in legacy mode
939[ 1.429010] hidraw: raw HID events driver (C) Jiri Kosina
940[ 1.430318] usbcore: registered new interface driver usbhid
941[ 1.430340] usbhid: USB HID core driver
942[ 1.430973] ashmem: initialized
943[ 1.432358] qpnp_coincell_charger_show_state: enabled=Y, voltage=3200 mV, resistance=2100 ohm
944[ 1.447482] bimc-bwmon 408000.qcom,cpu-bwmon: BW HWmon governor registered.
945[ 1.449318] arm-memlat-mon soc:qcom,arm-memlat-mon-0: Memory Latency governor registered.
946[ 1.449376] arm-memlat-mon soc:qcom,arm-memlat-mon-2: Memory Latency governor registered.
947[ 1.452498] m4m-hwmon 6530000.qcom,m4m-hwmon: Cache HWmon governor registered.
948[ 1.456846] devfreq soc:qcom,cpubw: Couldn't update frequency transition information.
949[ 1.456977] devfreq soc:qcom,mincpubw: Couldn't update frequency transition information.
950[ 1.457085] devfreq soc:qcom,memlat-cpu0: Couldn't update frequency transition information.
951[ 1.457185] devfreq soc:qcom,memlat-cpu2: Couldn't update frequency transition information.
952[ 1.458239] devfreq soc:qcom,m4m: Couldn't update frequency transition information.
953[ 1.461623] usbcore: registered new interface driver snd-usb-audio
954[ 1.463397] cs35l34 7-0041: Wrong cirrus,boost-manager DT value 0
955[ 1.463412] cs35l34 7-0041: Wrong cirrus,sdout-datacfg DT value 0
956[ 1.464194] cs35l34 7-0041: Cirrus Logic CS35l34 (35a34), Revision: 00
957[ 1.467011] qpnp_pin_of_gpio_xlate: no such PMIC gpio 15 in device topology
958[ 1.467028] audio-ref-clk soc:audio_ext_clk: Looking up qcom,audio-ref-clk-gpio property in node /soc/audio_ext_clk failed -22
959[ 1.467041] audio-ref-clk: probe of soc:audio_ext_clk failed with error -22
960[ 1.470522] 7-0023 supply hs_det_vdd not found, using dummy regulator
961[ 1.470757] fsa8500 7-0023: Device ID is 0x1
962[ 1.473734] fsa8500_initialize success
963[ 1.473882] fsa8500 probed successfully
964[ 1.481262] msm-dai-q6-mi2s soc:qcom,msm-dai-mi2s:qcom,msm-dai-q6-mi2s-sec: msm_dai_q6_mi2s_platform_data_validation: Unable to get pinctrl handle
965[ 1.481286] msm-dai-q6-mi2s: probe of soc:qcom,msm-dai-mi2s:qcom,msm-dai-q6-mi2s-sec failed with error -22
966[ 1.483789] msm-dai-tdm soc:qcom,msm-dai-tdm-tert-rx: msm_dai_tdm_q6_probe: dev_name: soc:qcom,msm-dai-tdm-tert-rx group_id: 0x9120
967[ 1.484077] msm-dai-q6-tdm soc:qcom,msm-dai-tdm-tert-rx:qcom,msm-dai-q6-tdm-tert-rx-0: msm_dai_q6_tdm_dev_probe: dev_name: soc:qcom,msm-dai-tdm-tert-rx:qcom,msm-dai-q6-tdm-tert-rx-0 dev_id: 0x9020
968[ 1.484093] msm-dai-q6-tdm soc:qcom,msm-dai-tdm-tert-rx:qcom,msm-dai-q6-tdm-tert-rx-0: msm_dai_q6_tdm_dev_probe: Custom tdm header not supported
969[ 1.484252] msm-dai-q6-tdm soc:qcom,msm-dai-tdm-tert-rx:qcom,msm-dai-q6-tdm-tert-rx-1: msm_dai_q6_tdm_dev_probe: dev_name: soc:qcom,msm-dai-tdm-tert-rx:qcom,msm-dai-q6-tdm-tert-rx-1 dev_id: 0x9022
970[ 1.484267] msm-dai-q6-tdm soc:qcom,msm-dai-tdm-tert-rx:qcom,msm-dai-q6-tdm-tert-rx-1: msm_dai_q6_tdm_dev_probe: Custom tdm header not supported
971[ 1.484416] msm-dai-q6-tdm soc:qcom,msm-dai-tdm-tert-rx:qcom,msm-dai-q6-tdm-tert-rx-2: msm_dai_q6_tdm_dev_probe: dev_name: soc:qcom,msm-dai-tdm-tert-rx:qcom,msm-dai-q6-tdm-tert-rx-2 dev_id: 0x9024
972[ 1.484431] msm-dai-q6-tdm soc:qcom,msm-dai-tdm-tert-rx:qcom,msm-dai-q6-tdm-tert-rx-2: msm_dai_q6_tdm_dev_probe: Custom tdm header not supported
973[ 1.484584] msm-dai-q6-tdm soc:qcom,msm-dai-tdm-tert-rx:qcom,msm-dai-q6-tdm-tert-rx-3: msm_dai_q6_tdm_dev_probe: dev_name: soc:qcom,msm-dai-tdm-tert-rx:qcom,msm-dai-q6-tdm-tert-rx-3 dev_id: 0x9026
974[ 1.484599] msm-dai-q6-tdm soc:qcom,msm-dai-tdm-tert-rx:qcom,msm-dai-q6-tdm-tert-rx-3: msm_dai_q6_tdm_dev_probe: Custom tdm header not supported
975[ 1.484629] msm-dai-tdm soc:qcom,msm-dai-tdm-tert-tx: msm_dai_tdm_q6_probe: dev_name: soc:qcom,msm-dai-tdm-tert-tx group_id: 0x9121
976[ 1.484782] msm-dai-q6-tdm soc:qcom,msm-dai-tdm-tert-tx:qcom,msm-dai-q6-tdm-tert-tx-0: msm_dai_q6_tdm_dev_probe: dev_name: soc:qcom,msm-dai-tdm-tert-tx:qcom,msm-dai-q6-tdm-tert-tx-0 dev_id: 0x9021
977[ 1.484797] msm-dai-q6-tdm soc:qcom,msm-dai-tdm-tert-tx:qcom,msm-dai-q6-tdm-tert-tx-0: msm_dai_q6_tdm_dev_probe: Custom tdm header not supported
978[ 1.484949] msm-dai-q6-tdm soc:qcom,msm-dai-tdm-tert-tx:qcom,msm-dai-q6-tdm-tert-tx-1: msm_dai_q6_tdm_dev_probe: dev_name: soc:qcom,msm-dai-tdm-tert-tx:qcom,msm-dai-q6-tdm-tert-tx-1 dev_id: 0x9023
979[ 1.484963] msm-dai-q6-tdm soc:qcom,msm-dai-tdm-tert-tx:qcom,msm-dai-q6-tdm-tert-tx-1: msm_dai_q6_tdm_dev_probe: Custom tdm header not supported
980[ 1.485109] msm-dai-q6-tdm soc:qcom,msm-dai-tdm-tert-tx:qcom,msm-dai-q6-tdm-tert-tx-2: msm_dai_q6_tdm_dev_probe: dev_name: soc:qcom,msm-dai-tdm-tert-tx:qcom,msm-dai-q6-tdm-tert-tx-2 dev_id: 0x9025
981[ 1.485123] msm-dai-q6-tdm soc:qcom,msm-dai-tdm-tert-tx:qcom,msm-dai-q6-tdm-tert-tx-2: msm_dai_q6_tdm_dev_probe: Custom tdm header not supported
982[ 1.485270] msm-dai-q6-tdm soc:qcom,msm-dai-tdm-tert-tx:qcom,msm-dai-q6-tdm-tert-tx-3: msm_dai_q6_tdm_dev_probe: dev_name: soc:qcom,msm-dai-tdm-tert-tx:qcom,msm-dai-q6-tdm-tert-tx-3 dev_id: 0x9027
983[ 1.485284] msm-dai-q6-tdm soc:qcom,msm-dai-tdm-tert-tx:qcom,msm-dai-q6-tdm-tert-tx-3: msm_dai_q6_tdm_dev_probe: Custom tdm header not supported
984[ 1.485310] msm-dai-tdm soc:qcom,msm-dai-tdm-quat-rx: msm_dai_tdm_q6_probe: dev_name: soc:qcom,msm-dai-tdm-quat-rx group_id: 0x9130
985[ 1.485456] msm-dai-q6-tdm soc:qcom,msm-dai-tdm-quat-rx:qcom,msm-dai-q6-tdm-quat-rx-0: msm_dai_q6_tdm_dev_probe: dev_name: soc:qcom,msm-dai-tdm-quat-rx:qcom,msm-dai-q6-tdm-quat-rx-0 dev_id: 0x9030
986[ 1.485470] msm-dai-q6-tdm soc:qcom,msm-dai-tdm-quat-rx:qcom,msm-dai-q6-tdm-quat-rx-0: msm_dai_q6_tdm_dev_probe: Custom tdm header not supported
987[ 1.485616] msm-dai-q6-tdm soc:qcom,msm-dai-tdm-quat-rx:qcom,msm-dai-q6-tdm-quat-rx-1: msm_dai_q6_tdm_dev_probe: dev_name: soc:qcom,msm-dai-tdm-quat-rx:qcom,msm-dai-q6-tdm-quat-rx-1 dev_id: 0x9032
988[ 1.485630] msm-dai-q6-tdm soc:qcom,msm-dai-tdm-quat-rx:qcom,msm-dai-q6-tdm-quat-rx-1: msm_dai_q6_tdm_dev_probe: Custom tdm header not supported
989[ 1.485780] msm-dai-q6-tdm soc:qcom,msm-dai-tdm-quat-rx:qcom,msm-dai-q6-tdm-quat-rx-2: msm_dai_q6_tdm_dev_probe: dev_name: soc:qcom,msm-dai-tdm-quat-rx:qcom,msm-dai-q6-tdm-quat-rx-2 dev_id: 0x9034
990[ 1.485794] msm-dai-q6-tdm soc:qcom,msm-dai-tdm-quat-rx:qcom,msm-dai-q6-tdm-quat-rx-2: msm_dai_q6_tdm_dev_probe: Custom tdm header not supported
991[ 1.485940] msm-dai-q6-tdm soc:qcom,msm-dai-tdm-quat-rx:qcom,msm-dai-q6-tdm-quat-rx-3: msm_dai_q6_tdm_dev_probe: dev_name: soc:qcom,msm-dai-tdm-quat-rx:qcom,msm-dai-q6-tdm-quat-rx-3 dev_id: 0x9036
992[ 1.485953] msm-dai-q6-tdm soc:qcom,msm-dai-tdm-quat-rx:qcom,msm-dai-q6-tdm-quat-rx-3: msm_dai_q6_tdm_dev_probe: Custom tdm header not supported
993[ 1.485980] msm-dai-tdm soc:qcom,msm-dai-tdm-quat-tx: msm_dai_tdm_q6_probe: dev_name: soc:qcom,msm-dai-tdm-quat-tx group_id: 0x9131
994[ 1.486126] msm-dai-q6-tdm soc:qcom,msm-dai-tdm-quat-tx:qcom,msm-dai-q6-tdm-quat-tx-0: msm_dai_q6_tdm_dev_probe: dev_name: soc:qcom,msm-dai-tdm-quat-tx:qcom,msm-dai-q6-tdm-quat-tx-0 dev_id: 0x9031
995[ 1.486141] msm-dai-q6-tdm soc:qcom,msm-dai-tdm-quat-tx:qcom,msm-dai-q6-tdm-quat-tx-0: msm_dai_q6_tdm_dev_probe: Custom tdm header not supported
996[ 1.486291] msm-dai-q6-tdm soc:qcom,msm-dai-tdm-quat-tx:qcom,msm-dai-q6-tdm-quat-tx-1: msm_dai_q6_tdm_dev_probe: dev_name: soc:qcom,msm-dai-tdm-quat-tx:qcom,msm-dai-q6-tdm-quat-tx-1 dev_id: 0x9033
997[ 1.486306] msm-dai-q6-tdm soc:qcom,msm-dai-tdm-quat-tx:qcom,msm-dai-q6-tdm-quat-tx-1: msm_dai_q6_tdm_dev_probe: Custom tdm header not supported
998[ 1.486450] msm-dai-q6-tdm soc:qcom,msm-dai-tdm-quat-tx:qcom,msm-dai-q6-tdm-quat-tx-2: msm_dai_q6_tdm_dev_probe: dev_name: soc:qcom,msm-dai-tdm-quat-tx:qcom,msm-dai-q6-tdm-quat-tx-2 dev_id: 0x9035
999[ 1.486465] msm-dai-q6-tdm soc:qcom,msm-dai-tdm-quat-tx:qcom,msm-dai-q6-tdm-quat-tx-2: msm_dai_q6_tdm_dev_probe: Custom tdm header not supported
1000[ 1.486613] msm-dai-q6-tdm soc:qcom,msm-dai-tdm-quat-tx:qcom,msm-dai-q6-tdm-quat-tx-3: msm_dai_q6_tdm_dev_probe: dev_name: soc:qcom,msm-dai-tdm-quat-tx:qcom,msm-dai-q6-tdm-quat-tx-3 dev_id: 0x9037
1001[ 1.486627] msm-dai-q6-tdm soc:qcom,msm-dai-tdm-quat-tx:qcom,msm-dai-q6-tdm-quat-tx-3: msm_dai_q6_tdm_dev_probe: Custom tdm header not supported
1002[ 1.489179] msm-compr-dsp soc:qcom,msm-compr-dsp: msm_compr_probe: dev name soc:qcom,msm-compr-dsp
1003[ 1.498362] msm8996-asoc-snd soc:sound: populate_snd_card_dailinks(): right cs35l34 hardware present
1004[ 1.499796] msm8996-asoc-snd soc:sound: ASoC: platform (null) not registered
1005[ 1.501632] GACT probability NOT on
1006[ 1.501651] Mirror/redirect action on
1007[ 1.501666] u32 classifier
1008[ 1.501670] Actions configured
1009[ 1.501688] Netfilter messages via NETLINK v0.30.
1010[ 1.501699] nfnl_acct: registering with nfnetlink.
1011[ 1.501725] nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
1012[ 1.501902] ctnetlink v0.93: registering with nfnetlink.
1013[ 1.502276] xt_time: kernel timezone is -0000
1014[ 1.502426] ip_tables: (C) 2000-2006 Netfilter Core Team
1015[ 1.502506] arp_tables: (C) 2002 David S. Miller
1016[ 1.502534] TCP: cubic registered
1017[ 1.502548] Initializing XFRM netlink socket
1018[ 1.502764] NET: Registered protocol family 10
1019[ 1.503216] mip6: Mobile IPv6
1020[ 1.503235] ip6_tables: (C) 2000-2006 Netfilter Core Team
1021[ 1.503305] sit: IPv6 over IPv4 tunneling driver
1022[ 1.503557] NET: Registered protocol family 17
1023[ 1.503574] NET: Registered protocol family 15
1024[ 1.503603] bridge: automatic filtering via arp/ip/ip6tables has been deprecated. Update your scripts to load br_netfilter if you need this.
1025[ 1.503621] Bridge firewalling registered
1026[ 1.503628] Ebtables v2.0 registered
1027[ 1.503762] Bluetooth: ffffffc0f98a3ce0
1028[ 1.503771] Bluetooth: ffffffc0f98a3cd0Bluetooth: ffffffc0f98a3d10Bluetooth: ffffffc0f98a3cf0Bluetooth: ffffffc0f98a3cf0Bluetooth: ffffffc0f98a3cd0Bluetooth: ffffffc0f98a3d40Bluetooth: ffffffc0f98a3d20
1029[ 1.503849] l2tp_core: L2TP core driver, V2.0
1030[ 1.503862] l2tp_ppp: PPPoL2TP kernel driver, V2.0
1031[ 1.503869] l2tp_ip: L2TP IP encapsulation support (L2TPv3)
1032[ 1.503885] l2tp_netlink: L2TP netlink interface
1033[ 1.503904] l2tp_eth: L2TP ethernet pseudowire support (L2TPv3)
1034[ 1.503917] l2tp_debugfs: L2TP debugfs support
1035[ 1.503924] l2tp_ip6: L2TP IP encapsulation support for IPv6 (L2TPv3)
1036[ 1.504766] NET: Registered protocol family 27
1037[ 1.508620] subsys-pil-tz 9300000.qcom,lpass: for adsp segments only will be dumped.
1038[ 1.509755] subsys-pil-tz 1c00000.qcom,ssc: for slpi segments only will be dumped.
1039[ 1.511306] pil-q6v5-mss 2080000.qcom,mss: Failed to find the pas_id.
1040[ 1.512017] pil-q6v5-mss 2080000.qcom,mss: for modem segments only will be dumped.
1041[ 1.513216] hd3ss460 soc:hd3ss460: USB supply not found, deferring probe
1042[ 1.513566] usb3813 7-002d: USB supply not found, deferring probe
1043[ 1.516592] sps:BAM 0x0000000006b04000 is registered.
1044[ 1.519347] smbchg_parse_peripherals: node /soc/qcom,spmi@400f000/qcom,pmi8994@2/qcom,qpnp-smbcharger IO resource absent!
1045[ 1.519476] smb_parse_dt: length=2
1046[ 1.519487] smb_parse_dt: num stepchg entries=2
1047[ 1.519499] smb_parse_dt: Step 0 max_mv = 4200 mV, max_ma = 2500 mA, taper_ma = 1800 mA
1048[ 1.519511] smb_parse_dt: Step 1 max_mv = 4400 mV, max_ma = 1800 mA, taper_ma = 1500 mA
1049[ 1.519525] smb_parse_dt: num chg-thermal-mitigation levels = 5
1050[ 1.519535] smb_parse_dt: num charge mitigation entries = 5
1051[ 1.519545] smb_parse_dt: num thermal-mitigation levels = 7
1052[ 1.519555] smb_parse_dt: num mitigation entries = 7
1053[ 1.520392] smb_parse_dt: length=5
1054[ 1.520415] smb_parse_dt: num parallel charge entries=5
1055[ 1.520506] smbcharger_charger_otg: no parameters
1056[ 1.520628] smbcharger_external_otg: no parameters
1057[ 1.520685] smbcharger_external_otg: supplied by pmi8994_boost_5v
1058[ 1.520880] smbchg_hw_init: Couldn't set 5V USBC Voltage rc=-22
1059[ 1.521480] ------------[ cut here ]------------
1060[ 1.521497] WARNING: CPU: 0 PID: 348 at ../../../../../../kernel/motorola/msm8996/kernel/irq/manage.c:448 __enable_irq+0x40/0x88()
1061[ 1.521508] Unbalanced enable for IRQ 138
1062[ 1.521518] CPU: 0 PID: 348 Comm: kworker/0:2 Tainted: G W 3.18.31-lineageOS #7
1063[ 1.521528] Hardware name: Sheridan (DT)
1064[ 1.521540] Workqueue: events status_change_work
1065[ 1.521550] Call trace:
1066[ 1.521562] [<ffffffc000088b04>] dump_backtrace+0x0/0x23c
1067[ 1.521571] [<ffffffc000088d54>] show_stack+0x14/0x1c
1068[ 1.521583] [<ffffffc000ed68a0>] dump_stack+0x88/0xac
1069[ 1.521593] [<ffffffc0000a0e70>] warn_slowpath_common+0x88/0xb0
1070[ 1.521602] [<ffffffc0000a0f14>] warn_slowpath_fmt+0x50/0x58
1071[ 1.521611] [<ffffffc0000efdc8>] __enable_irq+0x40/0x88
1072[ 1.521620] [<ffffffc0000efe78>] enable_irq+0x68/0x78
1073[ 1.521628] [<ffffffc0008639c8>] status_change_work+0x158/0xb0c
1074[ 1.521640] [<ffffffc0000b59fc>] process_one_work+0x25c/0x438
1075[ 1.521650] [<ffffffc0000b5efc>] worker_thread+0x324/0x440
1076[ 1.521660] [<ffffffc0000baa60>] kthread+0xe0/0xe8
1077[ 1.521668] ---[ end trace 317bb328910270c4 ]---
1078[ 1.547943] smbchg_request_irqs: node /soc/qcom,spmi@400f000/qcom,pmi8994@2/qcom,qpnp-smbcharger IO resource absent!
1079[ 1.548687] smbchg_fg_ready: SMBCHG: FG Status: Unknown Battery
1080[ 1.548696] smbchg_fg_ready: SMBCHG: FG Status: Not Ready!
1081[ 1.548844] smbchg_probe: SMBCHG successfully probe Charger version=SCHG Revision DIG:2.0 ANA:2.1 batt=1 dc=0 usb=0
1082[ 1.549375] msm8996-asoc-snd soc:sound: populate_snd_card_dailinks(): right cs35l34 hardware present
1083[ 1.550848] msm8996-asoc-snd soc:sound: ASoC: platform (null) not registered
1084[ 1.552379] usb3813 7-002d: Done probing usb3813
1085[ 1.552857] msm8996-asoc-snd soc:sound: populate_snd_card_dailinks(): right cs35l34 hardware present
1086[ 1.554278] msm8996-asoc-snd soc:sound: ASoC: platform (null) not registered
1087[ 1.555412] Loading compiled-in X.509 certificates
1088[ 1.557594] mod_display_register_impl: Registered impl for type: 1
1089[ 1.558241] mot_dba_panel_parse_dt: failed to find mot_dba,sel-dsi-val
1090[ 1.559265] fastrpc soc:qcom,msm-adsprpc-mem: for adsp_rh segments only will be dumped.
1091[ 1.559374] adsprpc: channel link type: 0
1092[ 1.566979] msm8996-asoc-snd soc:sound: populate_snd_card_dailinks(): right cs35l34 hardware present
1093[ 1.568433] msm8996-asoc-snd soc:sound: ASoC: platform (null) not registered
1094[ 1.569210] msm-dwc3 6a00000.ssusb: DWC3 in low power mode
1095[ 1.569522] 7-005a supply vibrator_vdd not found, using dummy regulator
1096[ 1.569889] drv2605: No default calibration data
1097[ 1.571264] drv260x: drv260x_init success
1098[ 1.572003] msm8996-asoc-snd soc:sound: populate_snd_card_dailinks(): right cs35l34 hardware present
1099[ 1.572242] utags (utags_probe): Done [config]
1100[ 1.572318] utags (utags_dt_init): backup storage path not provided
1101[ 1.572515] utags (utags_probe): Done [hw]
1102[ 1.573842] msm8996-asoc-snd soc:sound: ASoC: platform (null) not registered
1103[ 1.574992] msm8996-asoc-snd soc:sound: populate_snd_card_dailinks(): right cs35l34 hardware present
1104[ 1.575017] RNDIS_IPA module is loaded.
1105[ 1.576195] file system registered
1106[ 1.576253] mbim_init: initialize 1 instances
1107[ 1.576372] mbim_init: Initialized 1 ports
1108[ 1.576729] msm8996-asoc-snd soc:sound: ASoC: platform (null) not registered
1109[ 1.577472] rndis_qc_init: initialize rndis QC instance
1110[ 1.577618] Number of LUNs=8
1111[ 1.577629] Mass Storage Function, version: 2009/09/11
1112[ 1.577636] LUN: removable file: (no medium)
1113[ 1.577648] Number of LUNs=1
1114[ 1.577677] LUN: removable file: (no medium)
1115[ 1.577683] Number of LUNs=1
1116[ 1.578164] android_usb gadget: android_usb ready
1117[ 1.578993] msm8996-asoc-snd soc:sound: populate_snd_card_dailinks(): right cs35l34 hardware present
1118[ 1.580388] input: gpio-keys as /devices/soc/soc:gpio_keys/input/input8
1119[ 1.580423] input input8: gpio-keys report volume_up [0x73] type 0x1 state On
1120[ 1.580846] msm8996-asoc-snd soc:sound: ASoC: platform (null) not registered
1121[ 1.581585] stmvl53l0_get_dt_data gpio_array[0] = 1020
1122[ 1.581623] stmvl53l0_get_dt_data gpio_array[1] = 119
1123[ 1.582082] i2c-msm-v2 75b5000.i2c: NACK: slave not responding, ensure its powered: msgs(n:1 cur:0 tx) bc(rx:0 tx:1) mode:FIFO slv_addr:0x29 MSTR_STS:0x081343c8 OPER:0x000004c0
1124[ 1.582104] stmvl53l0_checkmoduleid: i2c_transfer err:-107, addr:0x29, reg:0xc0
1125[ 1.582258] msm8996-asoc-snd soc:sound: populate_snd_card_dailinks(): right cs35l34 hardware present
1126[ 1.583924] msm8996-asoc-snd soc:sound: ASoC: platform (null) not registered
1127[ 1.603893] stmvl53l0_checkmoduleid: STM VL53L0 Found 2291
1128[ 1.604071] input: Rear proximity sensor as /devices/virtual/input/input9
1129[ 1.604277] i2c-core: driver [stmvl53l0] using legacy resume method
1130[ 1.605247] qcom,qpnp-rtc qpnp-rtc-8: setting system clock to 1970-01-02 04:11:22 UTC (101482)
1131[ 1.605491] msm8996-asoc-snd soc:sound: populate_snd_card_dailinks(): right cs35l34 hardware present
1132[ 1.607703] msm8996-asoc-snd soc:sound: ASoC: platform (null) not registered
1133[ 1.608194] smb_psy_notifier_call: PSY Added/Removed run HB!
1134[ 1.608227] smbchg_fg_ready: SMBCHG: FG Status: Unknown Battery
1135[ 1.608235] smbchg_fg_ready: SMBCHG: FG Status: Not Ready!
1136[ 1.609077] msm8996-asoc-snd soc:sound: populate_snd_card_dailinks(): right cs35l34 hardware present
1137[ 1.611245] msm8996-asoc-snd soc:sound: ASoC: platform (null) not registered
1138[ 1.612709] msm8996-asoc-snd soc:sound: populate_snd_card_dailinks(): right cs35l34 hardware present
1139[ 1.614981] msm8996-asoc-snd soc:sound: ASoC: platform (null) not registered
1140[ 1.615651] lmh_lite:lmh_parse_sensor Registering sensor:[DLMt_APC1]
1141[ 1.615866] lmh_lite:lmh_parse_sensor Registering sensor:[LLM_cp00]
1142[ 1.616023] lmh_lite:lmh_parse_sensor Registering sensor:[LLM_cp01]
1143[ 1.616156] lmh_lite:lmh_parse_sensor Registering sensor:[LLM_cp10]
1144[ 1.616285] lmh_lite:lmh_parse_sensor Registering sensor:[LLM_cp11]
1145[ 1.616414] lmh_lite:lmh_parse_sensor Registering sensor:[LLM_m4m0]
1146[ 1.616542] lmh_lite:lmh_parse_sensor Registering sensor:[LLM_l21-]
1147[ 1.616673] lmh_lite:lmh_parse_sensor Registering sensor:[LLM_l20-]
1148[ 1.618284] msm8996-asoc-snd soc:sound: populate_snd_card_dailinks(): right cs35l34 hardware present
1149[ 1.619262] parse_cpu_levels: idx 1 545
1150[ 1.619273] parse_cpu_levels: idx 2 6022
1151[ 1.619278] parse_cpu_levels: idx 2 11499
1152[ 1.619491] parse_cpu_levels: idx 1 545
1153[ 1.619496] parse_cpu_levels: idx 2 6022
1154[ 1.619501] parse_cpu_levels: idx 2 11499
1155[ 1.620041] msm8996-asoc-snd soc:sound: ASoC: platform (null) not registered
1156[ 1.621255] msm8996-asoc-snd soc:sound: populate_snd_card_dailinks(): right cs35l34 hardware present
1157[ 1.622545] qcom,qpnp-flash-led qpnp-flash-led-23: Unable to acquire pinctrl
1158[ 1.623030] msm8996-asoc-snd soc:sound: ASoC: platform (null) not registered
1159[ 1.624122] rmnet_ipa started initialization
1160[ 1.624137] IPA SSR support = True
1161[ 1.624142] IPA ipa-loaduC = True
1162[ 1.624147] IPA SG support = True
1163[ 1.624175] msm8996-asoc-snd soc:sound: populate_snd_card_dailinks(): right cs35l34 hardware present
1164[ 1.626022] msm8996-asoc-snd soc:sound: ASoC: platform (null) not registered
1165[ 1.626183] ipa ipa_sps_irq_control_all:938 EP (5) not allocated.
1166[ 1.626198] ipa ipa2_uc_state_check:301 uC is not loaded
1167[ 1.626980] rmnet_ipa completed initialization
1168[ 1.628010] mmc0: new high speed SDHC card at address 59b4
1169[ 1.628045] msm8996-asoc-snd soc:sound: populate_snd_card_dailinks(): right cs35l34 hardware present
1170[ 1.628266] sdhci_msm_pm_qos_cpu_init (): voted for group #0 (mask=0x3) latency=70 (0xffffffc0f6158200)
1171[ 1.628283] sdhci_msm_pm_qos_cpu_init (): voted for group #1 (mask=0xc) latency=70 (0xffffffc0f6158208)
1172[ 1.628398] mmcblk0: mmc0:59b4 SMI 7.50 GiB
1173[ 1.629786] msm8996-asoc-snd soc:sound: ASoC: platform (null) not registered
1174[ 1.631430] qcom,cc-debug-8996 362000.qcom,cc-debug: Registered debug mux.
1175[ 1.632234] LDO1: disabling
1176[ 1.632285] wlan_en_vreg: disabling
1177[ 1.632291] rome_vreg: disabling
1178[ 1.632296] gdsc_mmagic_bimc: disabling
1179[ 1.632334] kryo1-retention: disabling
1180[ 1.632340] kryo0-retention: disabling
1181[ 1.632345] gfx_mem_acc_corner: disabling
1182[ 1.632350] apcc_l3_mem_acc_corner: disabling
1183[ 1.632355] apc1_perfcl_mem_acc_corner: disabling
1184[ 1.632360] apc0_pwrcl_mem_acc_corner: disabling
1185[ 1.632371] regulator_proxy_consumer_remove_all: removing regulator proxy consumer requests
1186[ 1.632527] msm8996-asoc-snd soc:sound: populate_snd_card_dailinks(): right cs35l34 hardware present
1187[ 1.632664] clock_late_init: Removing enables held for handed-off clocks
1188[ 1.634196] msm8996-asoc-snd soc:sound: ASoC: platform (null) not registered
1189[ 1.635054] mmcblk0: p1 p2
1190[ 1.636207] msm8996-asoc-snd soc:sound: populate_snd_card_dailinks(): right cs35l34 hardware present
1191[ 1.636845] ALSA device list:
1192[ 1.636875] No soundcards found.
1193[ 1.637151] Freeing unused kernel memory: 516K (ffffffc0016bb000 - ffffffc00173c000)
1194[ 1.637168] Freeing alternatives memory: 84K (ffffffc00173c000 - ffffffc001751000)
1195[ 1.638010] msm8996-asoc-snd soc:sound: ASoC: platform (null) not registered
1196[ 1.690102] mot_dba_get_default_resolution: invalid data
1197[ 1.706710] bcl_peripheral:bcl_poll_ibat_low Invalid ibat state 1
1198[ 1.886823] smbchg_force_apsd: Start APSD Rerun!
1199[ 1.886981] src_detect_handler: chip->usb_present = 0 usb_present = 0
1200[ 2.087500] synaptics_dsx_i2c 8-0020: fwu_scan_pdt: BL version = 6
1201[ 2.120777] drv2605 7-005a: Status: Autocalibration success
1202[ 2.123678] drv2605 7-005a: driver found: drv2605.
1203[ 2.125091] drv2605 7-005a: probe work succeeded
1204[ 2.436733] input input8: gpio-keys report volume_up [0x73] type 0x1 state Off
1205[ 2.610051] smbchg_fg_ready: SMBCHG: FG Status: Unknown Battery
1206[ 2.610062] smbchg_fg_ready: SMBCHG: FG Status: Not Ready!
1207[ 2.610088] bcl_peripheral:bcl_poll_vbat_high Vbat reached high clear trip. vbat:4186650
1208[ 2.749289] src_detect_handler: chip->usb_present = 0 usb_present = 1
1209[ 2.749460] smbchg_fg_ready: SMBCHG: FG Status: Unknown Battery
1210[ 2.749469] smbchg_fg_ready: SMBCHG: FG Status: Not Ready!
1211[ 2.870057] msm-dwc3 6a00000.ssusb: DWC3 exited from low power mode
1212[ 2.870077] ------------[ cut here ]------------
1213[ 2.870092] WARNING: CPU: 0 PID: 44 at ../../../../../../kernel/motorola/msm8996/kernel/irq/manage.c:448 __enable_irq+0x40/0x88()
1214[ 2.870103] Unbalanced enable for IRQ 724
1215[ 2.870113] CPU: 0 PID: 44 Comm: kworker/0:1 Tainted: G W 3.18.31-lineageOS #7
1216[ 2.870121] Hardware name: Sheridan (DT)
1217[ 2.870133] Workqueue: events dwc3_otg_sm_work
1218[ 2.870141] Call trace:
1219[ 2.870152] [<ffffffc000088b04>] dump_backtrace+0x0/0x23c
1220[ 2.870160] [<ffffffc000088d54>] show_stack+0x14/0x1c
1221[ 2.870171] [<ffffffc000ed68a0>] dump_stack+0x88/0xac
1222[ 2.870179] [<ffffffc0000a0e70>] warn_slowpath_common+0x88/0xb0
1223[ 2.870187] [<ffffffc0000a0f14>] warn_slowpath_fmt+0x50/0x58
1224[ 2.870194] [<ffffffc0000efdc8>] __enable_irq+0x40/0x88
1225[ 2.870202] [<ffffffc0000efe78>] enable_irq+0x68/0x78
1226[ 2.870209] [<ffffffc0006d7388>] dwc3_msm_resume+0x3d8/0x418
1227[ 2.870217] [<ffffffc0006d7400>] dwc3_msm_runtime_resume+0x38/0x44
1228[ 2.870229] [<ffffffc0005648dc>] pm_generic_runtime_resume+0x28/0x38
1229[ 2.870237] [<ffffffc0005660f4>] __rpm_callback+0x40/0x74
1230[ 2.870244] [<ffffffc00056618c>] rpm_callback+0x64/0x84
1231[ 2.870251] [<ffffffc00056690c>] rpm_resume+0x394/0x4d0
1232[ 2.870259] [<ffffffc00056752c>] __pm_runtime_resume+0x4c/0x70
1233[ 2.870266] [<ffffffc0006d6270>] dwc3_otg_sm_work+0x348/0x6c8
1234[ 2.870276] [<ffffffc0000b59fc>] process_one_work+0x25c/0x438
1235[ 2.870284] [<ffffffc0000b5efc>] worker_thread+0x324/0x440
1236[ 2.870293] [<ffffffc0000baa60>] kthread+0xe0/0xe8
1237[ 2.870300] ---[ end trace 317bb328910270c6 ]---
1238[ 3.750053] smbchg_fg_ready: SMBCHG: FG Status: Unknown Battery
1239[ 3.750069] smbchg_fg_ready: SMBCHG: FG Status: Not Ready!
1240[ 3.976018] EXT2-fs (sda20): warning: mounting unchecked fs, running e2fsck is recommended
1241[ 4.125426] enable_store: android_usb: already disabled
1242[ 4.132051] dwc3 6a00000.dwc3: request ffffffc0335d0000 was not queued to ep0out
1243[ 4.133483] rndis_function_bind_config: rndis_function_bind_config MAC: 00:00:00:00:00:00
1244[ 4.133540] android_usb gadget: using random self ethernet address
1245[ 4.133562] android_usb gadget: using random host ethernet address
1246[ 4.134039] rndis0: MAC be:b1:4c:1b:fd:7f
1247[ 4.134052] rndis0: HOST MAC 9a:4c:3d:19:6c:ee
1248[ 4.172591] IPv6: ADDRCONF(NETDEV_UP): rndis0: link is not ready
1249[ 4.473721] android_work: android_work: sent uevent USB_STATE=CONNECTED
1250[ 4.478289] android_work: android_work: sent uevent USB_STATE=DISCONNECTED
1251[ 4.583603] android_work: android_work: sent uevent USB_STATE=CONNECTED
1252[ 4.753395] smbchg_fg_ready: SMBCHG: FG Status: Unknown Battery
1253[ 4.753411] smbchg_fg_ready: SMBCHG: FG Status: Not Ready!
1254[ 4.831289] android_work: android_work: sent uevent USB_STATE=DISCONNECTED
1255[ 4.922134] android_work: android_work: did not send uevent (0 0 (null))
1256[ 5.011851] android_work: android_work: sent uevent USB_STATE=CONNECTED
1257[ 5.172656] android_work: android_work: sent uevent USB_STATE=DISCONNECTED
1258[ 5.246046] preinit: (5.24) Welcome to Sailfish OS 3.0.2.8 (Oulanka)
1259[ 5.258361] preinit: (5.25) is_erase_needed: No : 0
1260[ 5.263164] android_work: android_work: did not send uevent (0 0 (null))
1261[ 5.279075] preinit: (5.27) get_bootstate: USER : 0
1262[ 5.279627] preinit: (5.27) BOOTSTATE = USER
1263[ 5.281302] preinit: (5.28) Booting to default.target
1264[ 5.299600] pstore: Found record type 2, psi name ramoops
1265[ 5.299622] persistent_ram: persistent_ram_annotation_merge: merged 180
1266[ 5.299637] pstore: Found record type 8, psi name ramoops
1267[ 5.304453] systemd[1]: systemd 225 running in system mode. (+PAM -AUDIT -SELINUX +IMA -APPARMOR +SMACK -SYSVINIT +UTMP -LIBCRYPTSETUP +GCRYPT -GNUTLS +ACL +XZ -LZ4 -SECCOMP +BLKID -ELFUTILS +KMOD -IDN)
1268[ 5.304680] systemd[1]: Detected architecture arm64.
1269[ 5.305407] systemd[1]: Set hostname to <Sailfish>.
1270[ 5.320356] FG: fg_get_mmi_battid: Battsn unused
1271[ 5.320374] qcom,qpnp-fg qpnp-fg-18: Default Serial Number SNN5972
1272[ 5.320383] qcom,qpnp-fg qpnp-fg-18: Battery Match Found using default qcom,gv30-lg
1273[ 5.325043] FG: fg_batt_profile_init: Battery profiles same, using default
1274[ 5.328576] FG: populate_system_data: cutoff_voltage = 2999860, nom_cap_uah = 2681000 p1p2 = 43, p2p3 = 9
1275[ 5.330357] FG: fg_batt_profile_init: Battery SOC: 92, V: 4206823uV
1276[ 5.340580] ufshcd 624000.ufshc: ufshcd_ioctl: User buffer is NULL!
1277[ 5.352853] android_work: android_work: sent uevent USB_STATE=CONNECTED
1278[ 5.416079] systemd[1]: sys-fs-pstore.mount: Cannot create mount unit for API file system /sys/fs/pstore. Refusing.
1279[ 5.424590] systemd[1]: data.mount: Unit is bound to inactive unit dev-sda20.device. Stopping, too.
1280[ 5.434638] systemd[1]: Configuration file /lib/systemd/system/droid-hal-init.service is marked executable. Please remove executable permission bits. Proceeding anyway.
1281[ 5.451601] systemd[1]: sys-fs-pstore.mount: Cannot add dependency job, ignoring: Unit sys-fs-pstore.mount failed to load: Invalid argument. See system logs and 'systemctl status sys-fs-pstore.mount' for details.
1282[ 5.455322] systemd[1]: Reached target Login Prompts.
1283[ 5.455702] systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
1284[ 5.456309] systemd[1]: Created slice Root Slice.
1285[ 5.456527] systemd[1]: Listening on udev Kernel Socket.
1286[ 5.456766] systemd[1]: Listening on Journal Socket (/dev/log).
1287[ 5.457244] systemd[1]: Created slice System Slice.
1288[ 5.457674] systemd[1]: Listening on udev Control Socket.
1289[ 5.457874] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
1290[ 5.458109] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
1291[ 5.458256] systemd[1]: Reached target Swap.
1292[ 5.458490] systemd[1]: Listening on Journal Socket.
1293[ 5.459904] systemd[1]: Mounting Droid mount for /dev/stune...
1294[ 5.461362] systemd[1]: Starting Remount Root and Kernel File Systems...
1295[ 5.463532] systemd[1]: Starting Create list of required static device nodes for the current kernel...
1296[ 5.463791] systemd[1]: tmp.mount: Directory /tmp to mount over is not empty, mounting anyway.
1297[ 5.464980] systemd[1]: Mounting Temporary Directory...
1298[ 5.466445] systemd[1]: Mounting FFS mount...
1299[ 5.470515] systemd[1]: Mounting Debug File System...
1300[ 5.472616] systemd[1]: Starting Journal Service...
1301[ 5.474723] systemd[1]: Starting Setup Virtual Console...
1302[ 5.477174] systemd[1]: Mounting Droid mount for /dev/bfqio...
1303[ 5.483500] systemd[1]: Mounting Droid mount for /dev/cpuset...
1304[ 5.485043] systemd[1]: Mounting Droid mount for /dev/cpuctl...
1305[ 5.485619] systemd[1]: Created slice User and Session Slice.
1306[ 5.485816] systemd[1]: Reached target Slices.
1307[ 5.491162] systemd[1]: Mounted Debug File System.
1308[ 5.491849] cgroup: new mount options do not match the existing superblock, will be ignored
1309[ 5.493236] systemd[1]: Mounted Temporary Directory.
1310[ 5.493676] systemd[1]: Mounted FFS mount.
1311[ 5.493979] systemd[1]: Mounted Droid mount for /dev/bfqio.
1312[ 5.494897] systemd-journald[796]: [/etc/systemd/journald.conf:11] Failed to parse storage setting, ignoring: automatic
1313[ 5.496263] systemd[1]: Mounted Droid mount for /dev/cpuset.
1314[ 5.497144] systemd[1]: dev-stune.mount: Mount process exited, code=exited status=32
1315[ 5.497638] systemd[1]: Failed to mount Droid mount for /dev/stune.
1316[ 5.498003] systemd[1]: dev-stune.mount: Unit entered failed state.
1317[ 5.498838] systemd[1]: Started Create list of required static device nodes for the current kernel.
1318[ 5.500671] systemd[1]: Started Setup Virtual Console.
1319[ 5.501838] systemd[1]: dev-cpuctl.mount: Mount process exited, code=exited status=32
1320[ 5.502293] systemd[1]: Failed to mount Droid mount for /dev/cpuctl.
1321[ 5.502611] systemd-journald[796]: File /var/log/journal/4d716ee1420b485fa4723e379d048d66/system.journal corrupted or uncleanly shut down, renaming and replacing.
1322[ 5.502661] systemd[1]: dev-cpuctl.mount: Unit entered failed state.
1323[ 5.527782] systemd[1]: Started Remount Root and Kernel File Systems.
1324[ 5.614519] systemd[1]: Starting Clean RPM db region files at each reboot...
1325[ 5.616105] systemd[1]: Starting Load/Save Random Seed...
1326[ 5.621012] android_usb gadget: high-speed config #1: 66bf0c8.android_usb
1327[ 5.621129] msm-dwc3 6a00000.ssusb: Avail curr from USB = 500
1328[ 5.621221] IPv6: ADDRCONF(NETDEV_CHANGE): rndis0: link becomes ready
1329[ 5.656796] systemd[1]: Starting udev Coldplug all Devices...
1330[ 5.658342] systemd[1]: Starting Create Static Device Nodes in /dev...
1331[ 5.661013] systemd[1]: Started Load/Save Random Seed.
1332[ 5.673448] android_work: android_work: sent uevent USB_STATE=CONFIGURED
1333[ 5.675311] systemd[1]: Started Clean RPM db region files at each reboot.
1334[ 5.689705] systemd[1]: Started Create Static Device Nodes in /dev.
1335[ 5.716662] systemd[1]: Starting udev Kernel Device Manager...
1336[ 5.717423] systemd[1]: Reached target Local File Systems (Pre).
1337[ 5.720227] systemd[1]: Mounting Droid mount for /mnt...
1338[ 5.726620] systemd[1]: Mounted Droid mount for /mnt.
1339[ 5.756739] smbchg_fg_ready: SMBCHG: FG Status: GV30-LG-2630mah
1340[ 5.756759] smbchg_fg_ready: SMBCHG: FG Status: Lets Charge!
1341[ 5.761776] smbchg_heartbeat_work: EB Input 0 mA, PMI Input 500 mA, USBC CL 500 mA, DC 900 mA
1342[ 5.761794] smbchg_heartbeat_work: Step State = FIRST, BSW Mode OFF, EB State DISCONN
1343[ 5.761804] smbchg_check_temp_state: Battery Temp State = Good
1344[ 5.865093] systemd[1]: Started Journal Service.
1345[ 5.896303] systemd-journald[796]: Received request to flush runtime journal from PID 1
1346[ 6.723806] msm_thermal:do_cluster_freq_ctrl Limiting CPU0 max frequency to 1228800. Temp:62
1347[ 6.723825] msm_thermal:do_cluster_freq_ctrl Limiting CPU1 max frequency to 1228800. Temp:62
1348[ 6.723833] msm_thermal:do_cluster_freq_ctrl Limiting CPU2 max frequency to 1824000. Temp:62
1349[ 6.723842] msm_thermal:do_cluster_freq_ctrl Limiting CPU3 max frequency to 1824000. Temp:62
1350[ 7.002190] ufshcd 624000.ufshc: ufshcd_ioctl: User buffer is NULL!
1351[ 7.016272] ufshcd 624000.ufshc: ufshcd_ioctl: User buffer is NULL!
1352[ 7.029763] ufshcd 624000.ufshc: ufshcd_ioctl: User buffer is NULL!
1353[ 7.036490] ufshcd 624000.ufshc: ufshcd_ioctl: User buffer is NULL!
1354[ 7.061054] ufshcd 624000.ufshc: ufshcd_ioctl: User buffer is NULL!
1355[ 7.065174] ufshcd 624000.ufshc: ufshcd_ioctl: User buffer is NULL!
1356[ 7.078908] ufshcd 624000.ufshc: ufshcd_ioctl: User buffer is NULL!
1357[ 7.079307] ufshcd 624000.ufshc: ufshcd_ioctl: User buffer is NULL!
1358[ 7.079454] ufshcd 624000.ufshc: ufshcd_ioctl: User buffer is NULL!
1359[ 7.084195] ufshcd 624000.ufshc: ufshcd_ioctl: User buffer is NULL!
1360[ 7.085152] ufshcd 624000.ufshc: ufshcd_ioctl: User buffer is NULL!
1361[ 7.119872] ufshcd 624000.ufshc: ufshcd_ioctl: User buffer is NULL!
1362[ 7.126536] ufshcd 624000.ufshc: ufshcd_ioctl: User buffer is NULL!
1363[ 7.129737] ufshcd 624000.ufshc: ufshcd_ioctl: User buffer is NULL!
1364[ 7.134540] ufshcd 624000.ufshc: ufshcd_ioctl: User buffer is NULL!
1365[ 7.135061] ufshcd 624000.ufshc: ufshcd_ioctl: User buffer is NULL!
1366[ 7.139088] ufshcd 624000.ufshc: ufshcd_ioctl: User buffer is NULL!
1367[ 7.142585] ufshcd 624000.ufshc: ufshcd_ioctl: User buffer is NULL!
1368[ 7.142953] ufshcd 624000.ufshc: ufshcd_ioctl: User buffer is NULL!
1369[ 7.151039] ufshcd 624000.ufshc: ufshcd_ioctl: User buffer is NULL!
1370[ 7.155244] ufshcd 624000.ufshc: ufshcd_ioctl: User buffer is NULL!
1371[ 7.156454] ufshcd 624000.ufshc: ufshcd_ioctl: User buffer is NULL!
1372[ 7.156766] ufshcd 624000.ufshc: ufshcd_ioctl: User buffer is NULL!
1373[ 7.162514] ufshcd 624000.ufshc: ufshcd_ioctl: User buffer is NULL!
1374[ 7.163687] ufshcd 624000.ufshc: ufshcd_ioctl: User buffer is NULL!
1375[ 7.166636] ufshcd 624000.ufshc: ufshcd_ioctl: User buffer is NULL!
1376[ 7.183196] ufshcd 624000.ufshc: ufshcd_ioctl: User buffer is NULL!
1377[ 7.195281] ufshcd 624000.ufshc: ufshcd_ioctl: User buffer is NULL!
1378[ 7.199128] ufshcd 624000.ufshc: ufshcd_ioctl: User buffer is NULL!
1379[ 7.207136] ufshcd 624000.ufshc: ufshcd_ioctl: User buffer is NULL!
1380[ 7.213866] ufshcd 624000.ufshc: ufshcd_ioctl: User buffer is NULL!
1381[ 7.219260] ufshcd 624000.ufshc: ufshcd_ioctl: User buffer is NULL!
1382[ 7.219674] ufshcd 624000.ufshc: ufshcd_ioctl: User buffer is NULL!
1383[ 7.221542] ufshcd 624000.ufshc: ufshcd_ioctl: User buffer is NULL!
1384[ 7.226650] ufshcd 624000.ufshc: ufshcd_ioctl: User buffer is NULL!
1385[ 7.240104] ufshcd 624000.ufshc: ufshcd_ioctl: User buffer is NULL!
1386[ 7.240734] ufshcd 624000.ufshc: ufshcd_ioctl: User buffer is NULL!
1387[ 7.248335] ufshcd 624000.ufshc: ufshcd_ioctl: User buffer is NULL!
1388[ 7.248830] ufshcd 624000.ufshc: ufshcd_ioctl: User buffer is NULL!
1389[ 7.252700] ufshcd 624000.ufshc: ufshcd_ioctl: User buffer is NULL!
1390[ 7.259877] ufshcd 624000.ufshc: ufshcd_ioctl: User buffer is NULL!
1391[ 7.271252] ufshcd 624000.ufshc: ufshcd_ioctl: User buffer is NULL!
1392[ 7.272992] ufshcd 624000.ufshc: ufshcd_ioctl: User buffer is NULL!
1393[ 7.277566] ufshcd 624000.ufshc: ufshcd_ioctl: User buffer is NULL!
1394[ 7.282583] ufshcd 624000.ufshc: ufshcd_ioctl: User buffer is NULL!
1395[ 7.286370] ufshcd 624000.ufshc: ufshcd_ioctl: User buffer is NULL!
1396[ 7.289043] ufshcd 624000.ufshc: ufshcd_ioctl: User buffer is NULL!
1397[ 7.289478] ufshcd 624000.ufshc: ufshcd_ioctl: User buffer is NULL!
1398[ 7.292555] ufshcd 624000.ufshc: ufshcd_ioctl: User buffer is NULL!
1399[ 7.304542] ufshcd 624000.ufshc: ufshcd_ioctl: User buffer is NULL!
1400[ 7.314937] ufshcd 624000.ufshc: ufshcd_ioctl: User buffer is NULL!
1401[ 7.322397] ufshcd 624000.ufshc: ufshcd_ioctl: User buffer is NULL!
1402[ 7.324888] ufshcd 624000.ufshc: ufshcd_ioctl: User buffer is NULL!
1403[ 7.327449] ufshcd 624000.ufshc: ufshcd_ioctl: User buffer is NULL!
1404[ 7.336222] ufshcd 624000.ufshc: ufshcd_ioctl: User buffer is NULL!
1405[ 7.344843] ufshcd 624000.ufshc: ufshcd_ioctl: User buffer is NULL!
1406[ 7.345668] ufshcd 624000.ufshc: ufshcd_ioctl: User buffer is NULL!
1407[ 7.350981] ufshcd 624000.ufshc: ufshcd_ioctl: User buffer is NULL!
1408[ 7.358108] ufshcd 624000.ufshc: ufshcd_ioctl: User buffer is NULL!
1409[ 8.215839] EXT4-fs (sdc4): mounted filesystem without journal. Opts: (null)
1410[ 8.241056] EXT4-fs (sda16): mounted filesystem with ordered data mode. Opts: (null)
1411[ 8.308715] EXT4-fs (sda8): VFS: Can't find ext4 filesystem
1412[ 8.329349] EXT4-fs (sdc1): mounted filesystem with ordered data mode. Opts: barrier=1
1413[ 8.388505] EXT4-fs (sda3): Unrecognized mount option "def" or missing value
1414[ 8.399939] EXT4-fs (sda15): mounted filesystem with ordered data mode. Opts: barrier=1
1415[ 8.430214] EXT4-fs (sda11): mounted filesystem with ordered data mode. Opts: (null)
1416[ 9.543191] dwc3 6a00000.dwc3: request ffffffc0335d0000 was not queued to ep0out
1417[ 9.545873] [RMNET:HI] rmnet_config_notify_cb(): Kernel is trying to unregister rndis0
1418[ 9.564357] [RMNET:HI] rmnet_config_notify_cb(): Kernel is trying to unregister rndis0
1419[ 9.566551] droid-hal-init: init first stage started!
1420[ 9.567440] droid-hal-init: init second stage started!
1421[ 9.567494] droid-hal-init: Failed to initialize property area
1422[ 9.676181] rndis_function_bind_config: rndis_function_bind_config MAC: 16:F3:C4:E3:70:4F
1423[ 9.676244] android_usb gadget: using random self ethernet address
1424[ 9.676256] android_usb gadget: using previous host ethernet address
1425[ 9.676672] rndis0: MAC 7e:65:38:6c:94:54
1426[ 9.676714] rndis0: HOST MAC 9a:4c:3d:19:6c:ee
1427[ 9.689314] IPv6: ADDRCONF(NETDEV_UP): rndis0: link is not ready
1428[ 9.782900] dwc3_gadget_suspend_interrupt(): state:0. Ignore SUSPEND.
1429[ 9.843662] msm_thermal:do_cluster_freq_ctrl Limiting CPU0 max frequency to 1593600. Temp:46
1430[ 9.843684] msm_thermal:do_cluster_freq_ctrl Limiting CPU1 max frequency to 1593600. Temp:46
1431[ 9.843694] msm_thermal:do_cluster_freq_ctrl Limiting CPU2 max frequency to 2150400. Temp:46
1432[ 9.843704] msm_thermal:do_cluster_freq_ctrl Limiting CPU3 max frequency to 2150400. Temp:46
1433[ 9.892925] msm-dwc3 6a00000.ssusb: Avail curr from USB = 0
1434[ 9.893236] android_work: android_work: sent uevent USB_STATE=DISCONNECTED
1435[ 9.984978] android_work: android_work: sent uevent USB_STATE=CONNECTED
1436[ 9.989604] android_work: android_work: sent uevent USB_STATE=DISCONNECTED
1437[ 10.094891] android_work: android_work: sent uevent USB_STATE=CONNECTED
1438[ 10.215477] android_work: android_work: sent uevent USB_STATE=DISCONNECTED
1439[ 10.306291] android_work: android_work: did not send uevent (0 0 (null))
1440[ 10.396113] android_work: android_work: sent uevent USB_STATE=CONNECTED
1441[ 10.564954] android_work: android_work: sent uevent USB_STATE=DISCONNECTED
1442[ 10.659858] android_work: android_work: did not send uevent (0 0 (null))
1443[ 10.745411] android_work: android_work: sent uevent USB_STATE=CONNECTED
1444[ 10.795369] capability: warning: `ofonod' uses 32-bit capabilities (legacy support in use)
1445[ 10.961235] android_usb gadget: high-speed config #1: 66bf0c8.android_usb
1446[ 10.961385] msm-dwc3 6a00000.ssusb: Avail curr from USB = 500
1447[ 10.961492] IPv6: ADDRCONF(NETDEV_CHANGE): rndis0: link becomes ready
1448[ 11.013424] android_work: android_work: sent uevent USB_STATE=CONFIGURED
1449[ 11.443668] msm_thermal:do_cluster_freq_ctrl Limiting CPU0 max frequency to 1228800. Temp:66
1450[ 11.443689] msm_thermal:do_cluster_freq_ctrl Limiting CPU1 max frequency to 1228800. Temp:66
1451[ 11.443701] msm_thermal:do_cluster_freq_ctrl Limiting CPU2 max frequency to 1824000. Temp:66
1452[ 11.443710] msm_thermal:do_cluster_freq_ctrl Limiting CPU3 max frequency to 1824000. Temp:66
1453[ 11.767752] droid-hal-init: init first stage started!
1454[ 11.769080] droid-hal-init: init second stage started!
1455[ 11.769144] droid-hal-init: Failed to initialize property area
1456[ 12.143666] msm_thermal:do_cluster_freq_ctrl Limiting CPU0 max frequency to 1593600. Temp:48
1457[ 12.143687] msm_thermal:do_cluster_freq_ctrl Limiting CPU1 max frequency to 1593600. Temp:48
1458[ 12.143697] msm_thermal:do_cluster_freq_ctrl Limiting CPU2 max frequency to 2150400. Temp:48
1459[ 12.143707] msm_thermal:do_cluster_freq_ctrl Limiting CPU3 max frequency to 2150400. Temp:48
1460[ 14.135442] droid-hal-init: init first stage started!
1461[ 14.136173] droid-hal-init: init second stage started!
1462[ 14.136212] droid-hal-init: Failed to initialize property area
1463[ 41.127024] [RMNET:HI] rmnet_config_notify_cb(): Kernel is trying to unregister sit0
1464[ 41.133450] [RMNET:HI] rmnet_config_notify_cb(): Kernel is trying to unregister sit0
1465[ 41.135016] [RMNET:HI] rmnet_config_notify_cb(): Kernel is trying to unregister lo
1466[ 41.160052] [RMNET:HI] rmnet_config_notify_cb(): Kernel is trying to unregister lo
1467[ 65.978360] smbchg_heartbeat_work: EB Input 0 mA, PMI Input 500 mA, USBC CL 500 mA, DC 900 mA
1468[ 65.978381] smbchg_heartbeat_work: Step State = FIRST, BSW Mode OFF, EB State DISCONN
1469[ 76.005032] smbchg_heartbeat_work: EB Input 0 mA, PMI Input 500 mA, USBC CL 500 mA, DC 900 mA
1470[ 76.005052] smbchg_heartbeat_work: Step State = FIRST, BSW Mode OFF, EB State DISCONN
1471[ 78.164100] ------------[ cut here ]------------
1472[ 78.164131] WARNING: CPU: 2 PID: 3378 at ../../../../../../kernel/motorola/msm8996/net/core/dev.c:3426 netif_rx_internal+0x100/0x22c()
1473[ 78.164141] Cloned packet from dev lo
1474[ 78.164151] CPU: 2 PID: 3378 Comm: ssh Tainted: G W 3.18.31-lineageOS #7
1475[ 78.164160] Hardware name: Sheridan (DT)
1476[ 78.164168] Call trace:
1477[ 78.164180] [<ffffffc000088b04>] dump_backtrace+0x0/0x23c
1478[ 78.164188] [<ffffffc000088d54>] show_stack+0x14/0x1c
1479[ 78.164199] [<ffffffc000ed68a0>] dump_stack+0x88/0xac
1480[ 78.164208] [<ffffffc0000a0e70>] warn_slowpath_common+0x88/0xb0
1481[ 78.164216] [<ffffffc0000a0f14>] warn_slowpath_fmt+0x50/0x58
1482[ 78.164224] [<ffffffc000d0d2c0>] netif_rx_internal+0x100/0x22c
1483[ 78.164232] [<ffffffc000d12578>] netif_rx+0x84/0xbc
1484[ 78.164242] [<ffffffc0006681d4>] loopback_xmit+0x78/0xcc
1485[ 78.164249] [<ffffffc000d11b50>] dev_hard_start_xmit+0xf0/0x240
1486[ 78.164257] [<ffffffc000d1225c>] __dev_queue_xmit+0x3a0/0x4d4
1487[ 78.164265] [<ffffffc000d12404>] dev_queue_xmit+0x14/0x1c
1488[ 78.164274] [<ffffffc000d1ffb4>] neigh_resolve_output+0x160/0x184
1489[ 78.164284] [<ffffffc000d7d4f4>] ip_finish_output+0x94c/0x99c
1490[ 78.164291] [<ffffffc000d7d898>] ip_output+0xf0/0x144
1491[ 78.164299] [<ffffffc000d7bd2c>] ip_local_out_sk+0x3c/0x48
1492[ 78.164306] [<ffffffc000d7c1d8>] ip_queue_xmit+0x2d4/0x388
1493[ 78.164315] [<ffffffc000d91b68>] tcp_transmit_skb+0x8c0/0x918
1494[ 78.164324] [<ffffffc000d9435c>] tcp_connect+0x6c0/0x788
1495[ 78.164332] [<ffffffc000d95dcc>] tcp_v4_connect+0x3c8/0x414
1496[ 78.164341] [<ffffffc000dab954>] __inet_stream_connect+0xa8/0x2b0
1497[ 78.164349] [<ffffffc000dabb98>] inet_stream_connect+0x3c/0x58
1498[ 78.164359] [<ffffffc000cfb424>] SyS_connect+0x88/0xe0
1499[ 78.164367] ---[ end trace 317bb328910270c7 ]---
1500[nemo@Sailfish ~]$