· 6 years ago · Dec 27, 2019, 10:42 AM
1/ # dmesg
2[ 0.000000] Initializing cgroup subsys cpuset
3[ 0.000000] Initializing cgroup subsys cpu
4[ 0.000000] Initializing cgroup subsys cpuacct
5[ 0.000000] Linux version 3.10.107-lineageos-gb0405719-dirty (hawk@hawk) (gcc version 4.9 20150123 (prerelease) (GCC) ) #1 SMP PREEMPT Mon Dec 16 08:29:20 IST 2019
6[ 0.000000] CPU: AArch64 Processor [410fd031] revision 1
7[ 0.000000] Machine: Qualcomm Technologies, Inc. MSM 8939 CP8675
8[ 0.000000] cma: Found external_image__region@0, memory base 0x0000000086000000, size 8 MiB, limit 0xffffffffffffffff
9[ 0.000000] cma: Found modem_adsp_region@0, memory base 0x0000000086800000, size 86 MiB, limit 0xffffffffffffffff
10[ 0.000000] cma: Found pheripheral_region@0, memory base 0x000000008be00000, size 6 MiB, limit 0xffffffffffffffff
11[ 0.000000] cma: Found mba_region@0, memory base 0x0000000000000000, size 2 MiB, limit 0xffffffffffffffff
12[ 0.000000] cma: Found venus_region@0, memory base 0x0000000000000000, size 5 MiB, limit 0x0000000090000000
13[ 0.000000] cma: Found secure_region@0, memory base 0x0000000000000000, size 109 MiB, limit 0xffffffffffffffff
14[ 0.000000] cma: Found qseecom_region@0, memory base 0x0000000000000000, size 16 MiB, limit 0xffffffffffffffff
15[ 0.000000] cma: Found audio_region@0, memory base 0x0000000000000000, size 3 MiB, limit 0xffffffffffffffff
16[ 0.000000] cma: Found splash_region@83000000, memory base 0x0000000083000000, size 32 MiB, limit 0xffffffffffffffff
17[ 0.000000] cma: Found pstore_reserve_region@0, memory base 0x000000008c300000, size 1 MiB, limit 0xffffffffffffffff
18[ 0.000000] cma: CMA: reserved 8 MiB at 0x0000000086000000 for external_image_mem
19[ 0.000000] cma: CMA: reserved 86 MiB at 0x0000000086800000 for modem_adsp_mem
20[ 0.000000] cma: CMA: reserved 6 MiB at 0x000000008be00000 for peripheral_mem
21[ 0.000000] cma: CMA: reserved 4 MiB at 0x00000000ffc00000 for mba_mem
22[ 0.000000] cma: CMA: reserved 8 MiB at 0x000000008f800000 for venus_mem
23[ 0.000000] cma: CMA: reserved 112 MiB at 0x00000000f8c00000 for secure_mem
24[ 0.000000] cma: CMA: reserved 16 MiB at 0x00000000f7c00000 for qseecom_mem
25[ 0.000000] cma: CMA: reserved 4 MiB at 0x00000000f7800000 for audio_mem
26[ 0.000000] cma: CMA: reserved 32 MiB at 0x0000000083000000 for cont_splash_mem
27[ 0.000000] cma: CMA: reserved 1 MiB at 0x000000008c300000 for pstore_reserve_mem
28[ 0.000000] cma: CMA: reserved 16 MiB at 0x00000000f6800000 for default region
29[ 0.000000] On node 0 totalpages: 498688
30[ 0.000000] DMA zone: 8192 pages used for memmap
31[ 0.000000] DMA zone: 0 pages reserved
32[ 0.000000] DMA zone: 498688 pages, LIFO batch:31
33[ 0.000000] PERCPU: Embedded 17 pages/cpu @ffffffc076681000 s38528 r8192 d22912 u69632
34[ 0.000000] pcpu-alloc: s38528 r8192 d22912 u69632 alloc=17*4096
35[ 0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 [0] 4 [0] 5 [0] 6 [0] 7
36[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 490496
37[ 0.000000] Kernel command line: boot_cpus=0,4,5,6,7 sched_enable_hmp=1 console=ttyHSL0,115200,n8 androidboot.console=ttyHSL0 androidboot.hardware=qcom msm_rtb.filter=0x237 ehci-hcd.park=3 androidboot.bootdevice=7824900.sdhci lpm_levels.sleep_disabled=1 androidboot.emmc=true androidboot.serialno=3a22781 androidboot.bootloader=tomato-12-gfae8fcb panel.xres=720 androidboot.baseband=msmpoweron_reason=yulong.boot_reason=yulong.boot_event= yulong.reboot_event= yulong.hwid= yulong.qfid= mdss_mdp.panel=1:dsi:0:qcom,mdss_dsi_otm1283a_boyi_lg_hd_video:1:none
38[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
39[ 0.000000] Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes)
40[ 0.000000] Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes)
41[ 0.000000] software IO TLB [mem 0xf4200000-0xf4300000] (1MB) mapped at [ffffffc074200000-ffffffc0742fffff]
42[ 0.000000] Memory: 1737488K/1994752K available (9809K kernel code, 406K rwdata, 4056K rodata, 429K init, 1532K bss, 257264K reserved)
43[ 0.000000] Virtual kernel memory layout:
44[ 0.000000] vmalloc : 0xffffff8000000000 - 0xffffffbbffff0000 (245759 MB)
45[ 0.000000] vmemmap : 0xffffffbc02000000 - 0xffffffbc04000000 ( 32 MB)
46[ 0.000000] modules : 0xffffffbffc000000 - 0xffffffc000000000 ( 64 MB)
47[ 0.000000] memory : 0xffffffc000000000 - 0xffffffc080000000 ( 2048 MB)
48[ 0.000000] .init : 0xffffffc000e0c000 - 0xffffffc000e77680 ( 430 kB)
49[ 0.000000] .text : 0xffffffc000080000 - 0xffffffc000e0b414 ( 13870 kB)
50[ 0.000000] .data : 0xffffffc000e78000 - 0xffffffc000edda60 ( 407 kB)
51[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
52[ 0.000000] HMP scheduling enabled.
53[ 0.000000] Preemptible hierarchical RCU implementation.
54[ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
55[ 0.000000] Dump stacks of tasks blocking RCU-preempt GP.
56[ 0.000000] NR_IRQS:64 nr_irqs:64 0
57[ 0.000000] Architected cp15 and mmio timer(s) running at 19.20MHz (virt/virt).
58[ 0.000000] sched_clock: 56 bits at 19MHz, resolution 52ns, wraps every 3579139424256ns
59[ 0.000000] Console: colour dummy device 80x25
60[ 0.000427] Calibrating delay loop (skipped), value calculated using timer frequency.. 38.00 BogoMIPS (lpj=64000)
61[ 0.000438] pid_max: default: 32768 minimum: 301
62[ 0.000594] Security Framework initialized
63[ 0.000626] AppArmor: AppArmor initialized
64[ 0.000632] Yama: becoming mindful.
65[ 0.000739] Mount-cache hash table entries: 256
66[ 0.001585] Initializing cgroup subsys devices
67[ 0.001597] Initializing cgroup subsys freezer
68[ 0.001604] Initializing cgroup subsys blkio
69[ 0.001611] Initializing cgroup subsys perf_event
70[ 0.001629] Initializing cgroup subsys bfqio
71[ 0.002102] /cpus/cpu@100: Missing clock-frequency property
72[ 0.002114] /cpus/cpu@101: Missing clock-frequency property
73[ 0.002126] /cpus/cpu@102: Missing clock-frequency property
74[ 0.002137] /cpus/cpu@103: Missing clock-frequency property
75[ 0.002148] /cpus/cpu@0: Missing clock-frequency property
76[ 0.002161] /cpus/cpu@1: Missing clock-frequency property
77[ 0.002174] /cpus/cpu@2: Missing clock-frequency property
78[ 0.002189] /cpus/cpu@3: Missing clock-frequency property
79[ 0.002360] hw perfevents: enabled with arm/armv8-pmuv3 PMU driver, 7 counters available
80[ 0.003200] ftrace: Allocated trace_printk buffers
81[ 0.004101] MSM Memory Dump base table set up
82[ 0.004120] MSM Memory Dump apps data table set up
83[ 0.005337] cpu_clock_a53_init_little: A53 Power clocks configured
84[ 0.015361] Brought up 5 CPUs
85[ 0.015381] SMP: Total of 5 processors activated.
86[ 0.016727] devtmpfs: initialized
87[ 0.028318] EVM: security.SMACK64
88[ 0.028330] EVM: security.capability
89[ 0.033386] pinctrl core: initialized pinctrl subsystem
90[ 0.033971] regulator-dummy: no parameters
91[ 0.042702] NET: Registered protocol family 16
92[ 0.046503] DMA: preallocated 256 KiB pool for atomic allocations
93[ 0.120318] msm_watchdog b017000.qcom,wdt: wdog absent resource not present
94[ 0.120677] msm_watchdog b017000.qcom,wdt: MSM Watchdog Initialized
95[ 0.126873] spmi_pmic_arb 200f000.qcom,spmi: PMIC Arb Version-2 0x20010000
96[ 0.134972] cma: Assigned CMA region at 0 to 1de0000.qcom,venus device
97[ 0.135434] cma: Assigned CMA region at 0 to 4080000.qcom,mss device
98[ 0.138142] cma: Assigned CMA region at 0 to a21b000.qcom,pronto device
99[ 0.138818] ACC: mem_acc_efuse_init: efuse_addr = 0x0000000000058000 (len=0x1000)
100[ 0.138970] ACC: mem_acc_fuse_is_setting_expected: [row:0] = 0x2001000080090b @30:1 == 1 ?: no
101[ 0.139120] mem_acc_corner: 0 <--> 0 mV
102[ 0.169846] ramoops: pmsg buffer not configured
103[ 0.169867] ramoops: ftrace not configured<6>[ 0.185813] console [pstore-1] enabled
104[ 0.185833] ramoops: attached 0x100000@0x8c300000, ecc: 0/0
105[ 0.186316] vdso: 2 pages (1 code, 1 data) at base ffffffc000e7d000
106[ 0.187009] msm_mpm_dev_probe(): Cannot get clk resource for XO
107[ 0.187050] platform 601d0.qcom,mpm: Driver mpm-v2 requests probe deferral
108[ 0.187425] platform qcom,rpm-smd.11: Driver rpm-smd requests probe deferral
109[ 0.191572] smd_channel_probe_worker: allocation table not initialized
110[ 0.192067] smd_channel_probe_worker: allocation table not initialized
111[ 0.195623] cpr_efuse_init: apc_corner: efuse_addr = 0x0000000000058000 (len=0x1000)
112[ 0.195689] cpr_read_fuse_revision: apc_corner: fuse revision = 0
113[ 0.195708] cpr_parse_speed_bin_fuse: apc_corner: [row: 1]: 0x3030f82900977506, speed_bits = 2
114[ 0.195723] cpr_parse_pvs_version_fuse: apc_corner: [row: 1000]: 0x0, pvs_version = 0
115[ 0.195822] cpr_adjust_init_voltages: apc_corner: adjusted initial voltage[2]: 1100000 -> 1150000 uV
116[ 0.195842] cpr_pvs_init: apc_corner: pvs voltage: [1050000 1150000 1300000] uV
117[ 0.195853] cpr_pvs_init: apc_corner: ceiling voltage: [1050000 1150000 1350000] uV
118[ 0.195864] cpr_pvs_init: apc_corner: floor voltage: [1050000 1050000 1137500] uV
119[ 0.195997] platform b018000.regulator: Driver qcom,cpr-regulator requests probe deferral
120[ 0.196577] i2c-msm-v2 78ba000.i2c: probing driver i2c-msm-v2
121[ 0.196656] i2c-msm-v2 78ba000.i2c: error on clk_get(core_clk):-517
122[ 0.196670] i2c-msm-v2 78ba000.i2c: error probe() failed with err:-517
123[ 0.196694] platform 78ba000.i2c: Driver i2c-msm-v2 requests probe deferral
124[ 0.196880] i2c-msm-v2 78b6000.i2c: probing driver i2c-msm-v2
125[ 0.196944] i2c-msm-v2 78b6000.i2c: error on clk_get(core_clk):-517
126[ 0.196957] i2c-msm-v2 78b6000.i2c: error probe() failed with err:-517
127[ 0.196977] platform 78b6000.i2c: Driver i2c-msm-v2 requests probe deferral
128[ 0.197227] i2c-msm-v2 78b8000.i2c: probing driver i2c-msm-v2
129[ 0.197291] i2c-msm-v2 78b8000.i2c: error on clk_get(core_clk):-517
130[ 0.197304] i2c-msm-v2 78b8000.i2c: error probe() failed with err:-517
131[ 0.197323] platform 78b8000.i2c: Driver i2c-msm-v2 requests probe deferral
132[ 0.197500] i2c-msm-v2 78b9000.i2c: probing driver i2c-msm-v2
133[ 0.197561] i2c-msm-v2 78b9000.i2c: error on clk_get(core_clk):-517
134[ 0.197573] i2c-msm-v2 78b9000.i2c: error probe() failed with err:-517
135[ 0.197592] platform 78b9000.i2c: Driver i2c-msm-v2 requests probe deferral
136[ 0.199476] msm-thermal qcom,msm-thermal.15: msm_thermal:Failed reading node=/soc/qcom,msm-thermal, key=qcom,rpm-phase-resource-type err=-22. KTM continues
137[ 0.199498] msm-thermal qcom,msm-thermal.15: msm_thermal:Failed reading node=/soc/qcom,msm-thermal, key=qcom,gfx-sensor-id. err=-22. KTM continues
138[ 0.199522] msm-thermal qcom,msm-thermal.15: probe_vdd_mx:Failed reading node=/soc/qcom,msm-thermal, key=qcom,mx-restriction-temp. KTM continues
139[ 0.199540] msm-thermal qcom,msm-thermal.15: probe_psm:Failed reading node=/soc/qcom,msm-thermal, key=qcom,pmic-sw-mode-temp. err=-22. KTM continues
140[ 0.199582] msm_thermal:vdd_restriction_reg_init Defer regulator vdd-dig probe
141[ 0.199592] msm_thermal:probe_vdd_rstr Err regulator init. err:-517. KTM continues.
142[ 0.199605] msm-thermal qcom,msm-thermal.15: probe_vdd_rstr:Failed reading node=/soc/qcom,msm-thermal, key=qcom,freq-req. err=-517. KTM continues
143[ 0.199617] msm_thermal:msm_thermal_dev_probe Failed reading node=/soc/qcom,msm-thermal, key=qcom,freq-control-mask. err:-517
144[ 0.199634] platform qcom,msm-thermal.15: Driver msm-thermal requests probe deferral
145[ 0.200180] sps:sps is ready.
146[ 0.201365] platform 1874000.qcom,rpmcc: Driver qcom,rpmcc-8936 requests probe deferral
147[ 0.201734] platform 1800000.qcom,gcc: Driver qcom,gcc-8936 requests probe deferral
148[ 0.202814] cpu-clock-8939 b111050.qcom,cpu-clock-8939: Speed bin: 2 PVS Version: 0
149[ 0.202876] platform b111050.qcom,cpu-clock-8939: Driver cpu-clock-8939 requests probe deferral
150[ 0.204067] msm_mpm_dev_probe(): Cannot get clk resource for XO
151[ 0.204087] platform 601d0.qcom,mpm: Driver mpm-v2 requests probe deferral
152[ 0.205357] 8916_s1_corner: 0 <--> 0 mV at 0 mV normal idle
153[ 0.205950] 8916_s1_corner_ao: 0 <--> 0 mV at 0 mV normal idle
154[ 0.206462] 8916_s1_floor_corner: 0 <--> 0 mV at 0 mV normal idle
155[ 0.207189] 8916_s2_corner: 0 <--> 0 mV at 0 mV normal idle
156[ 0.207735] 8916_s2_corner_ao: 0 <--> 0 mV at 0 mV normal idle
157[ 0.208275] 8916_s2_floor_corner: 0 <--> 0 mV at 0 mV normal idle
158[ 0.208955] 8916_s3: 1200 <--> 1300 mV at 1200 mV normal idle
159[ 0.209665] 8916_s4: 1800 <--> 2100 mV at 1800 mV normal idle
160[ 0.210341] 8916_l1: 1225 mV normal idle
161[ 0.211097] 8916_l2: 1200 mV normal idle
162[ 0.211748] 8916_l3: 500 <--> 1287 mV at 0 mV normal idle
163[ 0.212233] 8916_l3_corner_ao: 0 <--> 0 mV at 0 mV normal idle
164[ 0.212765] 8916_l3_corner_so: 0 <--> 0 mV at 0 mV normal idle
165[ 0.213412] 8916_l4: 2050 mV normal idle
166[ 0.214200] 8916_l5: 1800 mV normal idle
167[ 0.214863] 8916_l6: 1800 mV normal idle
168[ 0.215573] 8916_l7: 1800 mV normal idle
169[ 0.216056] 8916_l7_ao: 1800 mV normal idle
170[ 0.216756] 8916_l8: 2850 <--> 2900 mV at 2850 mV normal idle
171[ 0.217402] 8916_l9: 3300 mV normal idle
172[ 0.218163] 8916_l10: 2700 <--> 2800 mV at 2700 mV normal idle
173[ 0.218821] 8916_l11: 1800 <--> 2950 mV at 1800 mV normal idle
174[ 0.219505] 8916_l12: 1800 <--> 2950 mV at 1800 mV normal idle
175[ 0.220176] 8916_l13: 3075 mV normal idle
176[ 0.220868] 8916_l14: 1800 <--> 3300 mV at 1800 mV normal idle
177[ 0.221595] 8916_l15: 1800 <--> 3300 mV at 1800 mV normal idle
178[ 0.222290] 8916_l16: 1800 <--> 3300 mV at 1800 mV normal idle
179[ 0.222956] 8916_l17: 2850 mV normal idle
180[ 0.223652] 8916_l18: 2700 mV normal idle
181[ 0.224105] cpr_efuse_init: apc_corner: efuse_addr = 0x0000000000058000 (len=0x1000)
182[ 0.224206] cpr_read_fuse_revision: apc_corner: fuse revision = 0
183[ 0.224236] cpr_parse_speed_bin_fuse: apc_corner: [row: 1]: 0x3030f82900977506, speed_bits = 2
184[ 0.224310] cpr_parse_pvs_version_fuse: apc_corner: [row: 1000]: 0x0, pvs_version = 0
185[ 0.224477] cpr_adjust_init_voltages: apc_corner: adjusted initial voltage[2]: 1100000 -> 1150000 uV
186[ 0.224512] cpr_pvs_init: apc_corner: pvs voltage: [1050000 1150000 1300000] uV
187[ 0.224534] cpr_pvs_init: apc_corner: ceiling voltage: [1050000 1150000 1350000] uV
188[ 0.224556] cpr_pvs_init: apc_corner: floor voltage: [1050000 1050000 1137500] uV
189[ 0.224819] platform b018000.regulator: Driver qcom,cpr-regulator requests probe deferral
190[ 0.225324] i2c-msm-v2 78ba000.i2c: probing driver i2c-msm-v2
191[ 0.225461] i2c-msm-v2 78ba000.i2c: error on clk_get(core_clk):-517
192[ 0.225487] i2c-msm-v2 78ba000.i2c: error probe() failed with err:-517
193[ 0.225529] platform 78ba000.i2c: Driver i2c-msm-v2 requests probe deferral
194[ 0.225972] i2c-msm-v2 78b6000.i2c: probing driver i2c-msm-v2
195[ 0.226094] i2c-msm-v2 78b6000.i2c: error on clk_get(core_clk):-517
196[ 0.226118] i2c-msm-v2 78b6000.i2c: error probe() failed with err:-517
197[ 0.226157] platform 78b6000.i2c: Driver i2c-msm-v2 requests probe deferral
198[ 0.226577] i2c-msm-v2 78b8000.i2c: probing driver i2c-msm-v2
199[ 0.226695] i2c-msm-v2 78b8000.i2c: error on clk_get(core_clk):-517
200[ 0.226719] i2c-msm-v2 78b8000.i2c: error probe() failed with err:-517
201[ 0.226756] platform 78b8000.i2c: Driver i2c-msm-v2 requests probe deferral
202[ 0.227167] i2c-msm-v2 78b9000.i2c: probing driver i2c-msm-v2
203[ 0.227284] i2c-msm-v2 78b9000.i2c: error on clk_get(core_clk):-517
204[ 0.227308] i2c-msm-v2 78b9000.i2c: error probe() failed with err:-517
205[ 0.227343] platform 78b9000.i2c: Driver i2c-msm-v2 requests probe deferral
206[ 0.227573] msm-thermal qcom,msm-thermal.15: msm_thermal:Failed reading node=/soc/qcom,msm-thermal, key=qcom,rpm-phase-resource-type err=-22. KTM continues
207[ 0.227612] msm-thermal qcom,msm-thermal.15: msm_thermal:Failed reading node=/soc/qcom,msm-thermal, key=qcom,gfx-sensor-id. err=-22. KTM continues
208[ 0.227727] msm_thermal:sensor_mgr_init_threshold threshold id already initialized
209[ 0.227766] msm-thermal qcom,msm-thermal.15: probe_vdd_mx:Failed reading node=/soc/qcom,msm-thermal, key=qcom,mx-restriction-temp. KTM continues
210[ 0.227800] msm-thermal qcom,msm-thermal.15: probe_psm:Failed reading node=/soc/qcom,msm-thermal, key=qcom,pmic-sw-mode-temp. err=-22. KTM continues
211[ 0.228177] msm_thermal:vdd_restriction_reg_init Defer vdd rstr freq init.
212[ 0.228785] msm-thermal qcom,msm-thermal.15: probe_sensor_info:unable to find DT for sensor-information.KTM continues
213[ 0.228807] msm-thermal qcom,msm-thermal.15: probe_ocr:Failed reading node=/soc/qcom,msm-thermal, key=qcom,pmic-opt-curr-temp err:-22. KTM continues
214[ 0.237128] qcom,rpmcc-8936 1874000.qcom,rpmcc: Registered RPM clocks.
215[ 0.244483] qcom,gcc-8936 1800000.qcom,gcc: Registered GCC clocks
216[ 0.244643] cpu-clock-8939 b111050.qcom,cpu-clock-8939: Speed bin: 2 PVS Version: 0
217[ 0.244801] platform b111050.qcom,cpu-clock-8939: Driver cpu-clock-8939 requests probe deferral
218[ 0.245543] cpr_efuse_init: apc_corner: efuse_addr = 0x0000000000058000 (len=0x1000)
219[ 0.245648] cpr_read_fuse_revision: apc_corner: fuse revision = 0
220[ 0.245680] cpr_parse_speed_bin_fuse: apc_corner: [row: 1]: 0x3030f82900977506, speed_bits = 2
221[ 0.245709] cpr_parse_pvs_version_fuse: apc_corner: [row: 1000]: 0x0, pvs_version = 0
222[ 0.245876] cpr_adjust_init_voltages: apc_corner: adjusted initial voltage[2]: 1100000 -> 1150000 uV
223[ 0.245911] cpr_pvs_init: apc_corner: pvs voltage: [1050000 1150000 1300000] uV
224[ 0.245933] cpr_pvs_init: apc_corner: ceiling voltage: [1050000 1150000 1350000] uV
225[ 0.245954] cpr_pvs_init: apc_corner: floor voltage: [1050000 1050000 1137500] uV
226[ 0.246215] platform b018000.regulator: Driver qcom,cpr-regulator requests probe deferral
227[ 0.246742] i2c-msm-v2 78ba000.i2c: probing driver i2c-msm-v2
228[ 0.246921] AXI: msm_bus_scale_register_client(): msm_bus_scale_register_client: Bus driver not ready.
229[ 0.246948] i2c-msm-v2 78ba000.i2c: msm_bus_scale_register_client(mstr-id:86):0 (not a problem)
230[ 0.248034] i2c-msm-v2 78b6000.i2c: probing driver i2c-msm-v2
231[ 0.248203] AXI: msm_bus_scale_register_client(): msm_bus_scale_register_client: Bus driver not ready.
232[ 0.248227] i2c-msm-v2 78b6000.i2c: msm_bus_scale_register_client(mstr-id:86):0 (not a problem)
233[ 0.251710] i2c-msm-v2 78b8000.i2c: probing driver i2c-msm-v2
234[ 0.251899] AXI: msm_bus_scale_register_client(): msm_bus_scale_register_client: Bus driver not ready.
235[ 0.251927] i2c-msm-v2 78b8000.i2c: msm_bus_scale_register_client(mstr-id:86):0 (not a problem)
236[ 0.253027] ncp6335d_regulator_probe:ncp addr is 0x1c
237[ 0.253107] AXI: msm_bus_scale_register_client(): msm_bus_scale_register_client: Bus driver not ready.
238[ 0.253619] ncp6335d-regulator 4-001c: Detected Regulator NCP6335D PID = 21
239[ 0.259685] ncp6335d: 1050 <--> 1350 mV at 1150 mV fast normal
240[ 0.261906] i2c-msm-v2 78b8000.i2c: NACK: slave not responding, ensure its powered: msgs(n:2 cur:0 tx) bc(rx:1 tx:1) mode:FIFO slv_addr:0x60 MSTR_STS:0x051363c8 OPER:0x00000010
241[ 0.274873] i2c-msm-v2 78b8000.i2c: NACK: slave not responding, ensure its powered: msgs(n:2 cur:0 tx) bc(rx:1 tx:1) mode:FIFO slv_addr:0x60 MSTR_STS:0x011363c8 OPER:0x00000010
242[ 0.298322] i2c-msm-v2 78b8000.i2c: NACK: slave not responding, ensure its powered: msgs(n:2 cur:0 tx) bc(rx:1 tx:1) mode:FIFO slv_addr:0x60 MSTR_STS:0x011363c8 OPER:0x00000010
243[ 0.331723] i2c-msm-v2 78b8000.i2c: NACK: slave not responding, ensure its powered: msgs(n:2 cur:0 tx) bc(rx:1 tx:1) mode:FIFO slv_addr:0x60 MSTR_STS:0x0d1343c8 OPER:0x00000010
244[ 0.375191] i2c-msm-v2 78b8000.i2c: NACK: slave not responding, ensure its powered: msgs(n:2 cur:0 tx) bc(rx:1 tx:1) mode:FIFO slv_addr:0x60 MSTR_STS:0x0d1343c8 OPER:0x00000010
245[ 0.428663] i2c-msm-v2 78b8000.i2c: NACK: slave not responding, ensure its powered: msgs(n:2 cur:0 tx) bc(rx:1 tx:1) mode:FIFO slv_addr:0x60 MSTR_STS:0x051363c8 OPER:0x00000010
246[ 0.428728] Failed reading reg=3 rc=-107
247[ 0.428758] fan53555-regulator 4-0060: Failed to get chip ID!
248[ 0.430872] i2c-msm-v2 78b9000.i2c: probing driver i2c-msm-v2
249[ 0.431059] AXI: msm_bus_scale_register_client(): msm_bus_scale_register_client: Bus driver not ready.
250[ 0.431086] i2c-msm-v2 78b9000.i2c: msm_bus_scale_register_client(mstr-id:86):0 (not a problem)
251[ 0.432615] cpu-clock-8939 b111050.qcom,cpu-clock-8939: Speed bin: 2 PVS Version: 0
252[ 0.432767] platform b111050.qcom,cpu-clock-8939: Driver cpu-clock-8939 requests probe deferral
253[ 0.433112] cpr_efuse_init: apc_corner: efuse_addr = 0x0000000000058000 (len=0x1000)
254[ 0.433215] cpr_read_fuse_revision: apc_corner: fuse revision = 0
255[ 0.433245] cpr_parse_speed_bin_fuse: apc_corner: [row: 1]: 0x3030f82900977506, speed_bits = 2
256[ 0.433273] cpr_parse_pvs_version_fuse: apc_corner: [row: 1000]: 0x0, pvs_version = 0
257[ 0.433437] cpr_adjust_init_voltages: apc_corner: adjusted initial voltage[2]: 1100000 -> 1150000 uV
258[ 0.433472] cpr_pvs_init: apc_corner: pvs voltage: [1050000 1150000 1300000] uV
259[ 0.433495] cpr_pvs_init: apc_corner: ceiling voltage: [1050000 1150000 1350000] uV
260[ 0.433515] cpr_pvs_init: apc_corner: floor voltage: [1050000 1050000 1137500] uV
261[ 0.433821] cpr_init_cpr_efuse: apc_corner: [row:27] = 0x9291ce04739560e5
262[ 0.433869] cpr_init_cpr_efuse: apc_corner: Corner[1]: ro_sel = 2, target quot = 1139
263[ 0.433892] cpr_init_cpr_efuse: apc_corner: Corner[2]: ro_sel = 2, target quot = 1139
264[ 0.433915] cpr_init_cpr_efuse: apc_corner: Corner[3]: ro_sel = 2, target quot = 1411
265[ 0.433958] cpr_adjust_target_quots: apc_corner: Corner[2]: adjusted target quot = 1243
266[ 0.433984] cpr_adjust_target_quots: apc_corner: Corner[3]: adjusted target quot = 1370
267[ 0.434111] cpr_get_corner_quot_adjustment: apc_corner: fuse corner 2 quotient adjustment scaling factor: 0.000
268[ 0.434133] cpr_get_corner_quot_adjustment: apc_corner: fuse corner 3 quotient adjustment scaling factor: 0.330
269[ 0.434198] cpr_virtual_corner_quot_adjust: apc_corner: corner=4 adjusted quotient=1139
270[ 0.434223] cpr_virtual_corner_quot_adjust: apc_corner: corner=5 adjusted quotient=1139
271[ 0.434249] cpr_virtual_corner_quot_adjust: apc_corner: corner=6 adjusted quotient=1139
272[ 0.434275] cpr_virtual_corner_quot_adjust: apc_corner: corner=7 adjusted quotient=1139
273[ 0.434301] cpr_virtual_corner_quot_adjust: apc_corner: corner=8 adjusted quotient=1139
274[ 0.434327] cpr_virtual_corner_quot_adjust: apc_corner: corner=9 adjusted quotient=1139
275[ 0.434353] cpr_virtual_corner_quot_adjust: apc_corner: corner=10 adjusted quotient=1139
276[ 0.434379] cpr_virtual_corner_quot_adjust: apc_corner: corner=11 adjusted quotient=1139
277[ 0.434406] cpr_virtual_corner_quot_adjust: apc_corner: corner=12 adjusted quotient=1139
278[ 0.434432] cpr_virtual_corner_quot_adjust: apc_corner: corner=13 adjusted quotient=1202
279[ 0.434544] cpr_virtual_corner_quot_adjust: apc_corner: corner=24 adjusted quotient=1483
280[ 0.434597] cpr_get_corner_quot_adjustment: apc_corner: adjusted quotient[1] = 1139
281[ 0.434614] cpr_get_corner_quot_adjustment: apc_corner: adjusted quotient[2] = 1139
282[ 0.434631] cpr_get_corner_quot_adjustment: apc_corner: adjusted quotient[3] = 1139
283[ 0.434649] cpr_get_corner_quot_adjustment: apc_corner: adjusted quotient[4] = 1139
284[ 0.434666] cpr_get_corner_quot_adjustment: apc_corner: adjusted quotient[5] = 1139
285[ 0.434683] cpr_get_corner_quot_adjustment: apc_corner: adjusted quotient[6] = 1139
286[ 0.434700] cpr_get_corner_quot_adjustment: apc_corner: adjusted quotient[7] = 1139
287[ 0.434716] cpr_get_corner_quot_adjustment: apc_corner: adjusted quotient[8] = 1139
288[ 0.434733] cpr_get_corner_quot_adjustment: apc_corner: adjusted quotient[9] = 1139
289[ 0.434750] cpr_get_corner_quot_adjustment: apc_corner: adjusted quotient[10] = 1139
290[ 0.434768] cpr_get_corner_quot_adjustment: apc_corner: adjusted quotient[11] = 1139
291[ 0.434785] cpr_get_corner_quot_adjustment: apc_corner: adjusted quotient[12] = 1139
292[ 0.434803] cpr_get_corner_quot_adjustment: apc_corner: adjusted quotient[13] = 1202
293[ 0.434820] cpr_get_corner_quot_adjustment: apc_corner: adjusted quotient[14] = 1243
294[ 0.434838] cpr_get_corner_quot_adjustment: apc_corner: adjusted quotient[15] = 1269
295[ 0.434855] cpr_get_corner_quot_adjustment: apc_corner: adjusted quotient[16] = 1295
296[ 0.434872] cpr_get_corner_quot_adjustment: apc_corner: adjusted quotient[17] = 1320
297[ 0.434889] cpr_get_corner_quot_adjustment: apc_corner: adjusted quotient[18] = 1326
298[ 0.434907] cpr_get_corner_quot_adjustment: apc_corner: adjusted quotient[19] = 1345
299[ 0.434924] cpr_get_corner_quot_adjustment: apc_corner: adjusted quotient[20] = 1358
300[ 0.434941] cpr_get_corner_quot_adjustment: apc_corner: adjusted quotient[21] = 1370
301[ 0.434959] cpr_get_corner_quot_adjustment: apc_corner: adjusted quotient[22] = 1370
302[ 0.434976] cpr_get_corner_quot_adjustment: apc_corner: adjusted quotient[23] = 1370
303[ 0.434993] cpr_get_corner_quot_adjustment: apc_corner: adjusted quotient[24] = 1483
304[ 0.435011] cpr_get_corner_quot_adjustment: apc_corner: adjusted quotient[25] = 1370
305[ 0.435028] cpr_get_corner_quot_adjustment: apc_corner: adjusted quotient[26] = 1370
306[ 0.435046] cpr_get_corner_quot_adjustment: apc_corner: adjusted quotient[27] = 1370
307[ 0.435063] cpr_get_corner_quot_adjustment: apc_corner: adjusted quotient[28] = 1370
308[ 0.435394] cpr_virtual_corner_voltage_adjust: apc_corner: corner=24 adjusted open-loop voltage=1335000
309[ 0.435567] cpr_fill_override_voltage: apc_corner: floor override voltage: [1050000 1050000 1050000 1050000 1050000 1050000 1050000 1050000 1050000 1050000 1050000 1050000 1050000 1100000 1137500 1137500 1137500 1137500 1137500 1137500 1137500 1137500 1137500 1137500 1137500 1137500 1137500 1137500] uV
310[ 0.435719] cpr_init_cpr_parameters: apc_corner: up threshold = 3, down threshold = 6
311[ 0.435773] cpr_init_cpr_parameters: apc_corner: CPR is enabled by default.
312[ 0.435803] cpr_config: apc_corner: Timer count: 0x17700 (for 5000 us)
313[ 0.436197] apc_corner: 0 <--> 0 mV
314[ 0.436586] cpu-clock-8939 b111050.qcom,cpu-clock-8939: Speed bin: 2 PVS Version: 0
315[ 0.475062] bio: create slab <bio-0> at 0
316[ 0.477733] KPI: Bootloader start count = 60811
317[ 0.477757] KPI: Bootloader end count = 1161157
318[ 0.477772] KPI: Bootloader display count = 80083
319[ 0.477786] KPI: Bootloader load kernel count = 2728065088
320[ 0.477802] KPI: Kernel MPM timestamp = 1182018
321[ 0.477816] KPI: Kernel MPM Clock frequency = 32768
322[ 0.477853] socinfo_print: v8, id=239, ver=1.0, raw_id=2315, raw_ver=0, hw_plat=8, hw_plat_ver=65536
323[ 0.477853] accessory_chip=0, hw_plat_subtype=0, pmic_model=65547, pmic_die_revision=131072
324[ 0.479877] spk_vreg: no parameters
325[ 0.481799] SCSI subsystem initialized
326[ 0.482894] usbcore: registered new interface driver usbfs
327[ 0.482984] usbcore: registered new interface driver hub
328[ 0.483185] usbcore: registered new device driver usb
329[ 0.483340] media: Linux media interface: v0.10
330[ 0.483412] Linux video capture interface: v2.00
331[ 0.483552] LC709203:lc709203_parse_dt: soc_high_scaled = 990 soc_low_scaled = 0
332[ 0.437637] AXI: msm_bus_scale_register_client(): msm_bus_scale_register_client: Bus driver not ready.
333[ 0.483582] AXI: msm_bus_scale_register_client(): msm_bus_scale_register_client: Bus driver not ready.<6>[ 0.485165] LC709203:lc709203_fuelgauger_probe:vadc_dev prop missing retval = -517
334[ 0.485212] i2c 0-000b: Driver yl_lc709203 requests probe deferral
335[ 0.489504] cma: Assigned CMA region at 0 to 8.qcom,ion-heap device
336[ 0.489633] ION-heap mm: Cannot specify alignment for this type of heap
337[ 0.489761] cma: Assigned CMA region at 0 to 1b.qcom,ion-heap device
338[ 0.489960] cma: Assigned CMA region at 0 to 1c.qcom,ion-heap device
339[ 0.490122] cma: Assigned CMA region at 0 to 17.qcom,ion-heap device
340[ 0.490263] cma: Assigned CMA region at 0 to 1a.qcom,ion-heap device
341[ 0.490532] ION heap system created
342[ 0.490657] ION heap mm created at 0x00000000f8c00000 with size 6d00000
343[ 0.490674] ION heap qsecom created at 0x00000000f7c00000 with size 1000000
344[ 0.490714] ION heap audio created at 0x00000000f7800000 with size 314000
345[ 0.490726] ION heap pil_1 created at 0x000000008be00000 with size 600000
346[ 0.490737] ION heap pil_2 created at 0x0000000086800000 with size 5600000
347[ 0.491224] msm_bus_fabric_init_driver
348[ 0.491335] msm_bus_device 580000.ad-hoc-bus: Dev 1024
349[ 0.491352] msm_bus_device 580000.ad-hoc-bus: Util-fact is missing, default to 100
350[ 0.491361] msm_bus_device 580000.ad-hoc-bus: Vrail-comp is missing, default to 100
351[ 0.491435] msm_bus_device 580000.ad-hoc-bus: Dev 2048
352[ 0.491450] msm_bus_device 580000.ad-hoc-bus: Util-fact is missing, default to 100
353[ 0.491458] msm_bus_device 580000.ad-hoc-bus: Vrail-comp is missing, default to 100
354[ 0.491508] msm_bus_device 580000.ad-hoc-bus: Dev 0
355[ 0.491521] msm_bus_device 580000.ad-hoc-bus: Util-fact is missing, default to 100
356[ 0.491530] msm_bus_device 580000.ad-hoc-bus: Vrail-comp is missing, default to 100
357[ 0.491580] msm_bus_device 580000.ad-hoc-bus: Dev 4096
358[ 0.491594] msm_bus_device 580000.ad-hoc-bus: Util-fact is missing, default to 100
359[ 0.491603] msm_bus_device 580000.ad-hoc-bus: Vrail-comp is missing, default to 100
360[ 0.493170] msm_bus_init_clk: Valid node clk node 1024 ctx 0
361[ 0.493179] msm_bus_init_clk: Valid node clk node 1024 ctx 1msm_bus_init_clk: Valid node clk node 2048 ctx 0
362[ 0.493239] msm_bus_init_clk: Valid node clk node 2048 ctx 1msm_bus_init_clk: Valid node clk node 0 ctx 0
363[ 0.493292] msm_bus_init_clk: Valid node clk node 0 ctx 1msm_bus_init_clk: Valid node clk node 4096 ctx 0
364[ 0.493344] msm_bus_init_clk: Valid node clk node 4096 ctx 1<6>[ 0.497942] gdsc_venus: no parameters
365[ 0.498178] gdsc_mdss: no parameters
366[ 0.498404] gdsc_jpeg: no parameters
367[ 0.498675] gdsc_vfe: no parameters
368[ 0.498865] gdsc_oxili_gx: no parameters
369[ 0.499029] gdsc_venus_core0: fast normal
370[ 0.499295] gdsc_venus_core1: fast normal
371[ 0.500012] mdss_pll_probe: MDSS pll label = MDSS DSI 0 PLL
372[ 0.500528] dsi_pll_clock_register_lpm: Registered DSI PLL clocks successfully
373[ 0.501401] msm_iommu 1f00000.qcom,iommu: device gfx_iommu (model: 500) mapped at ffffff8001040000, with 2 ctx banks
374[ 0.502054] msm_iommu 1e00000.qcom,iommu: device apps_iommu (model: 500) mapped at ffffff8001480000, with 20 ctx banks
375[ 0.506036] msm_iommu_ctx 1f09000.qcom,iommu-ctx: context gfx3d_user using bank 1
376[ 0.506268] msm_iommu_ctx 1f0a000.qcom,iommu-ctx: context gfx3d_priv using bank 2
377[ 0.506430] msm_iommu_ctx 1e22000.qcom,iommu-ctx: context jpeg_enc0 using bank 2
378[ 0.506582] msm_iommu_ctx 1e23000.qcom,iommu-ctx: context vfe using bank 3
379[ 0.506721] msm_iommu_ctx 1e24000.qcom,iommu-ctx: context mdp_0 using bank 4
380[ 0.506856] msm_iommu_ctx 1e25000.qcom,iommu-ctx: context venus_ns using bank 5
381[ 0.506986] msm_iommu_ctx 1e26000.qcom,iommu-ctx: context cpp using bank 6
382[ 0.507118] msm_iommu_ctx 1e27000.qcom,iommu-ctx: context mDSP using bank 7
383[ 0.507251] msm_iommu_ctx 1e28000.qcom,iommu-ctx: context gss using bank 8
384[ 0.507380] msm_iommu_ctx 1e29000.qcom,iommu-ctx: context a2 using bank 9
385[ 0.507515] msm_iommu_ctx 1e32000.qcom,iommu-ctx: context mdp_1 using bank 18
386[ 0.507647] msm_iommu_ctx 1e33000.qcom,iommu-ctx: context venus_sec_pixel using bank 19
387[ 0.507786] msm_iommu_ctx 1e34000.qcom,iommu-ctx: context venus_sec_bitstream using bank 20
388[ 0.507912] msm_iommu_ctx 1e35000.qcom,iommu-ctx: context venus_sec_non_pixel using bank 21
389[ 0.508040] msm_iommu_ctx 1e36000.qcom,iommu-ctx: context venus_fw using bank 22
390[ 0.508168] msm_iommu_ctx 1e37000.qcom,iommu-ctx: context periph_rpm using bank 23
391[ 0.508300] msm_iommu_ctx 1e38000.qcom,iommu-ctx: context periph_CE using bank 24
392[ 0.508426] msm_iommu_ctx 1e39000.qcom,iommu-ctx: context periph_BLSP using bank 25
393[ 0.508552] msm_iommu_ctx 1e3a000.qcom,iommu-ctx: context periph_SDC1 using bank 26
394[ 0.508681] msm_iommu_ctx 1e3b000.qcom,iommu-ctx: context periph_SDC2 using bank 27
395[ 0.508813] msm_iommu_ctx 1e3c000.qcom,iommu-ctx: context periph_audio using bank 28
396[ 0.508940] msm_iommu_ctx 1e3d000.qcom,iommu-ctx: context periph_USB_HS1 using bank 29
397[ 0.510114] Advanced Linux Sound Architecture Driver Initialized.
398[ 0.510542] Bluetooth: ffffffc073c7fd80
399[ 0.510567] NET: Registered protocol family 31
400[ 0.510573] Bluetooth: ffffffc073c7fd80
401[ 0.510582] Bluetooth: ffffffc073c7fd60Bluetooth: ffffffc073c7fd50
402[ 0.510602] Bluetooth: ffffffc073c7fd50<6>[ 0.510768] cfg80211: Calling CRDA to update world regulatory domain
403[ 0.510787] cfg80211: World regulatory domain updated:
404[ 0.510792] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
405[ 0.510798] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
406[ 0.510804] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
407[ 0.510809] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
408[ 0.510814] cfg80211: (5170000 KHz - 5250000 KHz @ 80000 KHz), (300 mBi, 2000 mBm)
409[ 0.510819] cfg80211: (5250000 KHz - 5330000 KHz @ 80000 KHz), (300 mBi, 2000 mBm)
410[ 0.510824] cfg80211: (5490000 KHz - 5710000 KHz @ 80000 KHz), (300 mBi, 2000 mBm)
411[ 0.510829] cfg80211: (5735000 KHz - 5835000 KHz @ 80000 KHz), (300 mBi, 2000 mBm)
412[ 0.510834] cfg80211: (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm)
413[ 0.510998] NetLabel: Initializing
414[ 0.511008] NetLabel: domain hash size = 128
415[ 0.511013] NetLabel: protocols = UNLABELED CIPSOv4
416[ 0.511058] NetLabel: unlabeled traffic allowed by default
417[ 0.511243] LC709203:lc709203_parse_dt: soc_high_scaled = 990 soc_low_scaled = 0
418[ 0.512712] LC709203:lc709203_fuelgauger_probe:vadc_dev prop missing retval = -517
419[ 0.512734] i2c 0-000b: Driver yl_lc709203 requests probe deferral
420[ 0.513181] Switching to clocksource arch_sys_counter
421[ 0.530056] AppArmor: AppArmor Filesystem Enabled
422[ 0.538349] NET: Registered protocol family 2
423[ 0.539053] TCP established hash table entries: 16384 (order: 6, 262144 bytes)
424[ 0.539332] TCP bind hash table entries: 16384 (order: 6, 262144 bytes)
425[ 0.539615] TCP: Hash tables configured (established 16384 bind 16384)
426[ 0.539676] TCP: reno registered
427[ 0.539689] UDP hash table entries: 1024 (order: 3, 32768 bytes)
428[ 0.539738] UDP-Lite hash table entries: 1024 (order: 3, 32768 bytes)
429[ 0.540112] NET: Registered protocol family 1
430[ 0.540220] LC709203:lc709203_parse_dt: soc_high_scaled = 990 soc_low_scaled = 0
431[ 0.541732] LC709203:lc709203_fuelgauger_probe:vadc_dev prop missing retval = -517
432[ 0.541755] i2c 0-000b: Driver yl_lc709203 requests probe deferral
433[ 0.542850] gcc-mdss-8936 qcom,gcc-mdss.18: Registered GCC MDSS clocks.
434[ 0.543526] Trying to unpack rootfs image as initramfs...
435[ 0.728355] Freeing initrd memory: 4008K (ffffffc002000000 - ffffffc0023ea000)
436[ 0.732910] audit: initializing netlink socket (disabled)
437[ 0.732971] type=2000 audit(0.726:1): initialized
438[ 0.737707] Registering sdcardfs 0.1
439[ 0.738071] fuse init (API version 7.23)
440[ 0.738502] msgmni has been set to 3721
441[ 0.741240] Key type asymmetric registered
442[ 0.741255] Asymmetric key parser 'x509' registered
443[ 0.741401] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 250)
444[ 0.741413] io scheduler noop registered (default)
445[ 0.741420] io scheduler deadline registered
446[ 0.741434] io scheduler row registered
447[ 0.741508] io scheduler cfq registered
448[ 0.741581] io scheduler bfq registered
449[ 0.741586] BFQ I/O-scheduler: v7r8
450[ 0.743853] platform qcom,smp2pgpio-ssr-smp2p-1-in.53: Driver smp2pgpio requests probe deferral
451[ 0.743959] platform qcom,smp2pgpio-ssr-smp2p-1-out.54: Driver smp2pgpio requests probe deferral
452[ 0.744590] platform qcom,smp2pgpio-ssr-smp2p-4-in.59: Driver smp2pgpio requests probe deferral
453[ 0.744689] platform qcom,smp2pgpio-ssr-smp2p-4-out.60: Driver smp2pgpio requests probe deferral
454[ 0.745025] msm_dss_get_res_byname: 'vbif_nrt_phys' resource not found
455[ 0.745045] mdss_mdp_probe+0x1d8/0xb34->msm_dss_ioremap_byname: 'vbif_nrt_phys' msm_dss_get_res_byname failed
456[ 0.745082] mdss_mdp_parse_dt_prop_len: prop qcom,mdss-pipe-cursor-off : doesn't exist in device tree
457[ 0.745122] mdss_mdp_pipe_addr_setup: type:1 ftchid:1 xinid:0 num:0 ndx:0x1 prio:0
458[ 0.745136] mdss_mdp_pipe_addr_setup: type:2 ftchid:7 xinid:1 num:3 ndx:0x8 prio:1
459[ 0.745144] mdss_mdp_pipe_addr_setup: type:2 ftchid:8 xinid:5 num:4 ndx:0x10 prio:2
460[ 0.745158] mdss_mdp_pipe_addr_setup: type:3 ftchid:4 xinid:2 num:6 ndx:0x40 prio:3
461[ 0.745179] mdss_mdp_parse_dt_handler: Error from prop qcom,mdss-pipe-sw-reset-off : u32 array read
462[ 0.745359] mdss_mdp_parse_dt_handler: Error from prop qcom,mdss-ib-factor-overlap : u32 array read
463[ 0.745379] mdss_mdp_parse_dt_prop_len: prop qcom,mdss-clk-levels : doesn't exist in device tree
464[ 0.745915] mdss_mdp_irq_clk_register: unable to get clk: lut_clk
465[ 0.748428] msm-tlmm-pinctrl 1000000.pinctrl: does not have pin group mdss-pins
466[ 0.748442] msm-tlmm-pinctrl 1000000.pinctrl: could not map group config for "mdss-pins"
467[ 0.748458] pinmux core: msm-pinctrl does not support function mdss-pins-func
468[ 0.748464] msm-tlmm-pinctrl 1000000.pinctrl: invalid function mdss-pins-func in map table
469[ 0.748477] msm-tlmm-pinctrl 1000000.pinctrl: does not have pin group mdss-te-pin
470[ 0.748483] msm-tlmm-pinctrl 1000000.pinctrl: could not map group config for "mdss-te-pin"
471[ 0.748492] pinmux core: msm-pinctrl does not support function mdss-te-pin-func
472[ 0.748498] msm-tlmm-pinctrl 1000000.pinctrl: invalid function mdss-te-pin-func in map table
473[ 0.748509] msm-tlmm-pinctrl 1000000.pinctrl: does not have pin group mdss-pins
474[ 0.748515] msm-tlmm-pinctrl 1000000.pinctrl: could not map group config for "mdss-pins"
475[ 0.748523] pinmux core: msm-pinctrl does not support function mdss-pins-func
476[ 0.748529] msm-tlmm-pinctrl 1000000.pinctrl: invalid function mdss-pins-func in map table
477[ 0.748540] msm-tlmm-pinctrl 1000000.pinctrl: does not have pin group mdss-te-pin
478[ 0.748546] msm-tlmm-pinctrl 1000000.pinctrl: could not map group config for "mdss-te-pin"
479[ 0.748554] pinmux core: msm-pinctrl does not support function mdss-te-pin-func
480[ 0.748560] msm-tlmm-pinctrl 1000000.pinctrl: invalid function mdss-te-pin-func in map table
481[ 0.748584] mdss_dsi_ctrl_probe: DSI Ctrl name = MDSS DSI CTRL->0
482[ 0.748765] msm-tlmm-pinctrl 1000000.pinctrl: does not have pin group mdss-pins
483[ 0.748773] msm-tlmm-pinctrl 1000000.pinctrl: could not map group config for "mdss-pins"
484[ 0.748783] pinmux core: msm-pinctrl does not support function mdss-pins-func
485[ 0.748789] msm-tlmm-pinctrl 1000000.pinctrl: invalid function mdss-pins-func in map table
486[ 0.748800] msm-tlmm-pinctrl 1000000.pinctrl: does not have pin group mdss-te-pin
487[ 0.748806] msm-tlmm-pinctrl 1000000.pinctrl: could not map group config for "mdss-te-pin"
488[ 0.748814] pinmux core: msm-pinctrl does not support function mdss-te-pin-func
489[ 0.748820] msm-tlmm-pinctrl 1000000.pinctrl: invalid function mdss-te-pin-func in map table
490[ 0.748830] msm-tlmm-pinctrl 1000000.pinctrl: does not have pin group mdss-pins
491[ 0.748836] msm-tlmm-pinctrl 1000000.pinctrl: could not map group config for "mdss-pins"
492[ 0.748845] pinmux core: msm-pinctrl does not support function mdss-pins-func
493[ 0.748851] msm-tlmm-pinctrl 1000000.pinctrl: invalid function mdss-pins-func in map table
494[ 0.748861] msm-tlmm-pinctrl 1000000.pinctrl: does not have pin group mdss-te-pin
495[ 0.748867] msm-tlmm-pinctrl 1000000.pinctrl: could not map group config for "mdss-te-pin"
496[ 0.748876] pinmux core: msm-pinctrl does not support function mdss-te-pin-func
497[ 0.748882] msm-tlmm-pinctrl 1000000.pinctrl: invalid function mdss-te-pin-func in map table
498[ 0.748890] mdss_dsi_pinctrl_init: failed to get pinctrl
499[ 0.748894] mdss_dsi_ctrl_probe: failed to get pin resources
500[ 0.748938] mdss_dsi_panel_init: Panel Name = LCD_TYPE_OTM1283A_BOYI_LG_HD_550
501[ 0.749153] mdss_dsi_parse_dcs_cmds: failed, key=qcom,mdss-dsi-post-panel-on-command
502[ 0.749193] mdss_dsi_parse_panel_features: ulps feature disabled
503[ 0.749202] mdss_dsi_parse_panel_features: ulps during suspend feature disabled
504[ 0.749209] mdss_dsi_parse_panel_features: dynamic switch feature enabled: 0
505[ 0.749220] mdss_dsi_parse_panel_features:1409, Disp_en gpio not specified
506[ 0.749451] mdss_dsi_panel_init: Continuous splash enabled
507[ 0.749754] dsi_panel_device_register:1904, TE gpio not specified
508[ 0.750133] mdss_dsi_pll_1_clk_init: can't find vco_clk. rc=-517
509[ 0.750141] PLL 1 Clock's did not register
510[ 0.750164] mdss_dsi_retrieve_ctrl_resources: ctrl_base=ffffff8000b96000 ctrl_size=25c phy_base=ffffff8000b98500 phy_size=2b0
511[ 0.773879] mdss_register_panel: adding framebuffer device 1a98000.qcom,mdss_dsi
512[ 0.774086] mdss_hw_rev_init: MDP Rev=10080000
513[ 0.774331] mdss_dsi_ctrl_probe: DSI Ctrl name = MDSS DSI CTRL->1
514[ 0.774343] mdss_dsi_pinctrl_init: failed to get pinctrl
515[ 0.774347] mdss_dsi_ctrl_probe: failed to get pin resources
516[ 0.774533] mdss_dsi_find_panel_of_node: invalid pan node, selecting prim panel
517[ 0.774540] mdss_dsi_ctrl_probe: can't find panel node 0:qcom,mdss_dsi_otm1283a_boyi_lg_hd_video:1:none
518[ 0.774556] mdss_dsi_ctrl: probe of 1aa0000.qcom,mdss_dsi failed with error 48
519[ 0.774975] mdss_dsi_status_init: DSI status check interval:5000
520[ 0.775234] mdss_register_panel: adding framebuffer device qcom,mdss_wb_panel.6
521[ 0.776226] mdss_fb_register: FrameBuffer[0] 720x1280 registered successfully!
522[ 0.776260] mdss_mdp_overlay_init: mdss_mdp_overlay_init: unable to add event timer
523[ 0.776604] mdss_fb_register: FrameBuffer[1] 1280x720 registered successfully!
524[ 0.776629] mdss_mdp_overlay_init: mdss_mdp_overlay_init: unable to add event timer
525[ 0.776675] mdss_mdp_splash_parse_dt: splash mem child node is not present
526[ 0.778994] IPC_RTR: msm_ipc_router_smd_driver_register Already driver registered IPCRTR
527[ 0.780724] msm_rpm_log_probe: OK
528[ 0.782548] NET: Registered protocol family 27
529[ 0.784534] In memshare_probe, Memshare probe success
530[ 0.786962] subsys-pil-tz a21b000.qcom,pronto: [wcnss]: Error getting proxy unvoting gpio
531[ 0.786988] platform a21b000.qcom,pronto: Driver subsys-pil-tz requests probe deferral
532[ 0.788589] pil-q6v5-mss 4080000.qcom,mss: [modem]: Error getting proxy unvoting gpio
533[ 0.788709] platform 4080000.qcom,mss: Driver pil-q6v5-mss requests probe deferral
534[ 0.789107] core_ctl: Creating CPU group 0
535[ 0.789112] core_ctl: Init CPU0 state
536[ 0.789117] core_ctl: Init CPU1 state
537[ 0.789121] core_ctl: Init CPU2 state
538[ 0.789124] core_ctl: Init CPU3 state
539[ 0.789323] core_ctl: Creating CPU group 4
540[ 0.789335] core_ctl: Init CPU4 state
541[ 0.789340] core_ctl: Init CPU5 state
542[ 0.789345] core_ctl: Init CPU6 state
543[ 0.789350] core_ctl: Init CPU7 state
544[ 0.790075] --tps--: tps65132_init
545[ 0.790127] --tps65132--enter--TPS65132 I2C Address:0x3e--!
546[ 0.807525] kgsl kgsl-3d0: Initialized kgsl-3d0: mmu=on
547[ 0.813750] brd: module loaded
548[ 0.815323] loop: module loaded
549[ 0.815552] zram: Created 1 device(s)
550[ 0.815814] QSEECOM: qseecom_probe: qseecom.qsee_version = 0x800000
551[ 0.815835] QSEECOM: qseecom_probe: disk-encrypt-pipe-pair=0x2
552[ 0.815841] QSEECOM: qseecom_probe: Device does not support PFEQSEECOM: qseecom_probe: qsee-ce-hw-instance=0x0
553[ 0.815853] QSEECOM: qseecom_probe: qseecom.appsbl_qseecom_support = 0x0<6>[ 0.815859] QSEECOM: qseecom_probe: qseecom clocks handled by other subsystem
554[ 0.816019] QSEECOM: qseecom_probe: secure app region addr=0x86000000 size=0x300000
555[ 0.818259] i2c-core: driver [tabla-i2c-core] using legacy suspend method
556[ 0.818268] i2c-core: driver [tabla-i2c-core] using legacy resume method
557[ 0.818314] i2c-core: driver [wcd9xxx-i2c-core] using legacy suspend method
558[ 0.818319] i2c-core: driver [wcd9xxx-i2c-core] using legacy resume method
559[ 0.818366] i2c-core: driver [tasha-i2c-core] using legacy suspend method
560[ 0.818371] i2c-core: driver [tasha-i2c-core] using legacy resume method
561[ 0.818971] SCSI Media Changer driver v0.25
562[ 0.820985] tun: Universal TUN/TAP device driver, 1.6
563[ 0.820997] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
564[ 0.823668] PPP generic driver version 2.4.2
565[ 0.823869] PPP BSD Compression module registered
566[ 0.823879] PPP Deflate Compression module registered
567[ 0.823905] PPP MPPE Compression module registered
568[ 0.823913] NET: Registered protocol family 24
569[ 0.823944] SLIP: version 0.8.4-NET3.019-NEWTTY (dynamic channels, max=256) (6 bit encapsulation enabled).
570[ 0.823950] CSLIP: code copyright 1989 Regents of the University of California.
571[ 0.824722] wcnss_wlan probed in built-in mode
572[ 0.825890] usbcore: registered new interface driver asix
573[ 0.825943] usbcore: registered new interface driver ax88179_178a
574[ 0.825977] usbcore: registered new interface driver cdc_ether
575[ 0.826006] usbcore: registered new interface driver dm9601
576[ 0.826037] usbcore: registered new interface driver net1080
577[ 0.826064] usbcore: registered new interface driver cdc_subset
578[ 0.826091] usbcore: registered new interface driver zaurus
579[ 0.826303] usbcore: registered new interface driver cdc_ncm
580[ 0.826838] msm_sharedmem: sharedmem_register_qmi: qmi init successful
581[ 0.827208] msm_sharedmem: msm_sharedmem_probe: Device created for client 'rmtfs'
582[ 0.827386] msm_sharedmem: msm_sharedmem_probe: Device created for client 'rfsa_dsp'
583[ 0.827554] msm_sharedmem: msm_sharedmem_probe: Device created for client 'rfsa_mdm'
584[ 0.828332] msm_otg 78d9000.usb: msm_otg probe
585[ 0.831136] msm_otg 78d9000.usb: OTG regs = ffffff8000bfe000
586[ 0.836503] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
587[ 0.836517] ehci-pci: EHCI PCI platform driver
588[ 0.836564] ehci-msm: Qualcomm On-Chip EHCI Host Controller
589[ 0.836919] ehci-msm2: Qualcomm EHCI Host Controller
590[ 0.838494] usbcore: registered new interface driver cdc_acm
591[ 0.838504] cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters
592[ 0.838548] usbcore: registered new interface driver ccid_bridge
593[ 0.838771] ccid_bridge_init: success
594[ 0.838824] usbcore: registered new interface driver usb-storage
595[ 0.838857] usbcore: registered new interface driver ums-alauda
596[ 0.838909] usbcore: registered new interface driver ums-cypress
597[ 0.838938] usbcore: registered new interface driver ums-datafab
598[ 0.838964] usbcore: registered new interface driver ums-freecom
599[ 0.838990] usbcore: registered new interface driver ums-isd200
600[ 0.839019] usbcore: registered new interface driver ums-jumpshot
601[ 0.839045] usbcore: registered new interface driver ums-karma
602[ 0.839071] usbcore: registered new interface driver ums-sddr09
603[ 0.839096] usbcore: registered new interface driver ums-sddr55
604[ 0.839121] usbcore: registered new interface driver ums-usbat
605[ 0.839218] usbcore: registered new interface driver usbserial
606[ 0.839246] usbcore: registered new interface driver qc_csvt
607[ 0.839269] usbserial: USB Serial support registered for qc_csvt
608[ 0.839298] usbcore: registered new interface driver usb_ehset_test
609[ 0.841180] msm_otg 78d9000.usb: phy_reset: success
610[ 0.841487] mousedev: PS/2 mouse device common for all mice
611[ 0.841597] usbcore: registered new interface driver xpad
612[ 0.841625] usbcore: registered new interface driver usb_acecad
613[ 0.841650] usbcore: registered new interface driver aiptek
614[ 0.841672] usbcore: registered new interface driver gtco
615[ 0.841696] usbcore: registered new interface driver hanwang
616[ 0.841719] usbcore: registered new interface driver kbtab
617[ 0.841741] usbcore: registered new interface driver wacom
618[ 0.842056] mpu6880 driver: init
619[ 0.842094] mpu6880 driver: ini1111t
620[ 0.950377] taojun=65
621[ 0.950382] MPdddd faidddl
622[ 0.950389] MPdddd fail
623[ 0.950392] MPdddd ttaoddl
624[ 0.950397] MPdddd ddddd
625[ 0.950480] input: mpu6880 as /devices/soc.0/78b6000.i2c/i2c-0/0-0068/input/input0
626[ 0.950555] MPbbbbtaojunddd
627[ 0.950568] mpu6880 probe successfully
628[ 0.950898] HALL:YLLOG: Registering hall driver
629[ 0.950904] HALL:YLLOG:===1===
630[ 0.951019] HALL:YLLOG:===right hall:gpio = 1016,wakeup = 1===
631[ 0.951024] HALL:YLLOG:success get hall devtree pdata!
632[ 0.951418] HALL:YLLOG:: Success to register driver
633[ 0.952336] qcom,qpnp-rtc qpnp-rtc-4: rtc core: registered qpnp_rtc as rtc0
634[ 0.952528] i2c /dev entries driver
635[ 0.955221] platform 1d00000.qcom,vidc: Driver msm_vidc_v4l2 requests probe deferral
636[ 0.962157] adp1660 i2c_add_driver success
637[ 0.962559] msm_flash_init_module:1111 Enter
638[ 0.963708] msm_flash_lm3642_init entry
639[ 0.965493] g_sctrl[0] ffffffc071de0000
640[ 0.965697] failed: sctrl already filled for cell_id 0failed: rc -22
641[ 0.965708] failed: msm_sensor_driver_parse rc -22<4>[ 0.965718] qcom,camera: probe of 20.qcom,camera failed with error -22
642[ 0.966143] g_sctrl[1] ffffffc071de1000
643[ 0.966360] MSM-CPP cpp_probe:3117 Bus master 1
644[ 0.980575] MSM-CPP cpp_init_hardware:953 CPP HW Version: 0x40020000
645[ 0.980591] MSM-CPP cpp_init_hardware:974 stream_cnt:0
646[ 0.983933] __msm_jpeg_init:1522] Jpeg Device id 0
647[ 0.986173] yl_pm8916_vbus_probe: ====probe enter===
648[ 0.986191] yl_pm8916_vbus_probe: battery supply not found deferring probe
649[ 0.986209] spmi yl_pm8916_vbus-11: Driver yulong,yl_pm8916_vbus requests probe deferral
650[ 0.986843] bq24157_sm_charger 4-006a: batt_temp_hot = 520, batt_temp_cold = 100,batt_temp_too_hot = 570, batt_temp_too_cold = 0
651[ 0.987378] bq24157_sm_charger 4-006a: this IC is BQ24517, probe
652[ 0.988169] BQ24157: bq24157_set_safe_reg: 0x06 Writing 0x79 : Reading 0x79
653[ 0.989015] random: nonblocking pool is initialized
654[ 0.998492] bq24157_sm_charger 4-006a: battery supply not found; defer probe
655[ 0.998516] i2c 4-006a: Driver bq24157_sm_charger requests probe deferral
656[ 0.999071] fan5405_charger 4-006a: batt_temp_hot = 520, batt_temp_cold = 100,batt_temp_too_hot = 570, batt_temp_too_cold = 0
657[ 0.999539] FAN5405: fan5405_get_ic_vender: register 0x03 = 0x02
658[ 0.999550] fan5405_charger 4-006a: this IC is not FAN5405, exit fan5405 probe
659[ 0.999565] fan5405_charger: probe of 4-006a failed with error -22
660[ 1.013458] device-mapper: uevent: version 1.0.3
661[ 1.013677] device-mapper: ioctl: 4.24.0-ioctl (2013-01-15) initialised: dm-devel@redhat.com
662[ 1.013827] device-mapper: req-crypt: dm-req-crypt successfully initalized.
663[ 1.013827]
664[ 1.015559] cpuidle: using governor ladder
665[ 1.015570] cpuidle: using governor menu
666[ 1.015601] sdhci: Secure Digital Host Controller Interface driver
667[ 1.015608] sdhci: Copyright(c) Pierre Ossman
668[ 1.015613] sdhci-pltfm: SDHCI platform and OF driver helper
669[ 1.020470] sdhci_msm 7824900.sdhci: host_use_default_qos = 0
670[ 1.020484] sdhci_msm 7824900.sdhci: For qos_policy(default qos) = 0, tbl_sz = 3, qos type = 2
671[ 1.020493] sdhci_msm 7824900.sdhci: dma_latency = 2
672[ 1.020501] sdhci_msm 7824900.sdhci: dma_latency = 401
673[ 1.020508] sdhci_msm 7824900.sdhci: dma_latency = 701
674[ 1.020517] sdhci_msm 7824900.sdhci: For qos_policy(modified dynamic qos) = 1, tbl_sz = 3, qos type = 1
675[ 1.020525] sdhci_msm 7824900.sdhci: dma_latency = 2
676[ 1.020532] sdhci_msm 7824900.sdhci: dma_latency = 401
677[ 1.020540] sdhci_msm 7824900.sdhci: dma_latency = 701
678[ 1.020548] sdhci_msm 7824900.sdhci: For qos_policy(modified dynamic qos) = 2, tbl_sz = 3, qos type = 2
679[ 1.020556] sdhci_msm 7824900.sdhci: dma_latency = 2
680[ 1.020563] sdhci_msm 7824900.sdhci: dma_latency = 401
681[ 1.020571] sdhci_msm 7824900.sdhci: dma_latency = 701
682[ 1.020578] sdhci_msm 7824900.sdhci: Host using mod dynamic pm_qos
683[ 1.021328] mmc0: no vqmmc regulator found
684[ 1.021348] mmc0: no vmmc regulator found
685[ 1.052151] mmc0: SDHCI controller on 7824900.sdhci [7824900.sdhci] using 32-bit ADMA
686[ 1.059698] sdhci_msm 7864900.sdhci: host_use_default_qos = 1
687[ 1.059714] sdhci_msm 7864900.sdhci: For qos_policy(default qos) = 0, tbl_sz = 1, qos type = 2
688[ 1.059722] sdhci_msm 7864900.sdhci: dma_latency = 401
689[ 1.059732] sdhci_msm 7864900.sdhci: For qos_policy(modified dynamic qos) = 1, tbl_sz = 1, qos type = 2
690[ 1.059740] sdhci_msm 7864900.sdhci: dma_latency = 200
691[ 1.059749] sdhci_msm 7864900.sdhci: For qos_policy(modified dynamic qos) = 2, tbl_sz = 1, qos type = 2
692[ 1.059757] sdhci_msm 7864900.sdhci: dma_latency = 200
693[ 1.059765] sdhci_msm 7864900.sdhci: Host using default pm_qos
694[ 1.060825] mmc1: no vqmmc regulator found
695[ 1.060848] mmc1: no vmmc regulator found
696[ 1.095460] mmc1: SDHCI controller on 7864900.sdhci [7864900.sdhci] using 32-bit ADMA
697[ 1.097877] aw2013_led 0-0045: Failed to get pinctrl
698[ 1.100175] qce 720000.qcedev: Qualcomm Crypto 5.3.1 device found @0x720000
699[ 1.100195] qce 720000.qcedev: CE device = 0x0
700[ 1.100195] , IO base, CE = 0xffffff80013c0000
701[ 1.100195] , Consumer (IN) PIPE 2, Producer (OUT) PIPE 3
702[ 1.100195] IO base BAM = 0x (null)
703[ 1.100195] BAM IRQ 239
704[ 1.100195] Engines Availability = 0x2010853
705[ 1.100229] sps:BAM 0x0000000000704000 is registered.
706[ 1.100484] sps:BAM 0x0000000000704000 (va:0xffffff80015c0000) enabled: ver:0x25, number of pipes:8
707[ 1.100771] QCE50: qce_sps_init: Qualcomm MSM CE-BAM at 0x0000000000704000 irq 239
708[ 1.101343] qcedev: FIPS140-2 Known Answer Tests : Skipped
709[ 1.102425] qcrypto 720000.qcrypto: Qualcomm Crypto 5.3.1 device found @0x720000
710[ 1.102441] qcrypto 720000.qcrypto: CE device = 0x0
711[ 1.102441] , IO base, CE = 0xffffff8001700000
712[ 1.102441] , Consumer (IN) PIPE 4, Producer (OUT) PIPE 5
713[ 1.102441] IO base BAM = 0x (null)
714[ 1.102441] BAM IRQ 239
715[ 1.102441] Engines Availability = 0x2010853
716[ 1.102911] QCE50: qce_sps_init: Qualcomm MSM CE-BAM at 0x0000000000704000 irq 239
717[ 1.103595] qcrypto 720000.qcrypto: qcrypto-ecb-aes
718[ 1.103727] qcrypto 720000.qcrypto: qcrypto-cbc-aes
719[ 1.103842] qcrypto 720000.qcrypto: qcrypto-ctr-aes
720[ 1.103947] qcrypto 720000.qcrypto: qcrypto-ecb-des
721[ 1.104041] qcrypto 720000.qcrypto: qcrypto-cbc-des
722[ 1.104134] qcrypto 720000.qcrypto: qcrypto-ecb-3des
723[ 1.104224] qcrypto 720000.qcrypto: qcrypto-cbc-3des
724[ 1.104328] qcrypto 720000.qcrypto: qcrypto-xts-aes
725[ 1.104425] qcrypto 720000.qcrypto: qcrypto-sha1
726[ 1.104514] qcrypto 720000.qcrypto: qcrypto-sha256
727[ 1.104602] qcrypto 720000.qcrypto: qcrypto-aead-hmac-sha1-cbc-aes
728[ 1.104689] qcrypto 720000.qcrypto: qcrypto-aead-hmac-sha1-cbc-des
729[ 1.104788] qcrypto 720000.qcrypto: qcrypto-aead-hmac-sha1-cbc-3des
730[ 1.104876] qcrypto 720000.qcrypto: qcrypto-aead-hmac-sha256-cbc-aes
731[ 1.104963] qcrypto 720000.qcrypto: qcrypto-aead-hmac-sha256-cbc-des
732[ 1.105049] qcrypto 720000.qcrypto: qcrypto-aead-hmac-sha256-cbc-3des
733[ 1.105138] qcrypto 720000.qcrypto: qcrypto-hmac-sha1
734[ 1.105223] qcrypto 720000.qcrypto: qcrypto-hmac-sha256
735[ 1.105311] qcrypto 720000.qcrypto: qcrypto-aes-ccm
736[ 1.105397] qcrypto 720000.qcrypto: qcrypto-rfc4309-aes-ccm
737[ 1.105405] qcrypto: FIPS140-2 Known Answer Tests: Skipped
738[ 1.105916] hidraw: raw HID events driver (C) Jiri Kosina
739[ 1.107579] usbcore: registered new interface driver usbhid
740[ 1.107589] usbhid: USB HID core driver
741[ 1.108023] ashmem: initialized
742[ 1.108505] qcom,qpnp-power-on qpnp-power-on-1: PMIC@SID0 Power-on reason: Triggered from USB (USB charger insertion) and 'warm' boot
743[ 1.108527] qcom,qpnp-power-on qpnp-power-on-1: PMIC@SID0: Power-off reason: Triggered from PS_HOLD (PS_HOLD/MSM controlled shutdown)
744[ 1.108681] input: qpnp_pon as /devices/virtual/input/input1
745[ 1.110490] PMIC@SID0: PM8916 v2.0 options: 0, 0, 0, 0
746[ 1.110650] pft [pft_lsm_init]: pft is not the chosen lsm.
747[ 1.110659] pft [pft_init]: Drivr initialized successfully Dec 16 2019 08:28:54.n
748[ 1.111657] bimc-bwmon 408000.qcom,cpu-bwmon: BW HWmon governor registered.
749[ 1.111999] bimc-bwmon 410000.qcom,gpu-bwmon: BW HWmon governor registered.
750[ 1.113401] devfreq cpubw: Couldn't update frequency transition information.
751[ 1.113634] devfreq mincpubw: Couldn't update frequency transition information.
752[ 1.114410] devfreq qcom,cci.63: Couldn't update frequency transition information.
753[ 1.115268] usbcore: registered new interface driver snd-usb-audio
754[ 1.116343] spmi msm8x16_wcd_codec-14: Driver wcd-spmi-core requests probe deferral
755[ 1.116371] spmi msm8x16_wcd_codec-15: Driver wcd-spmi-core requests probe deferral
756[ 1.127593] msm-pcm-lpa qcom,msm-pcm-lpa.23: msm_pcm_probe: dev name qcom,msm-pcm-lpa.23
757[ 1.128459] platform qcom,msm-voip-dsp.25: Driver msm-voip-dsp requests probe deferral
758[ 1.128882] platform qcom,msm-pcm-voice.26: Driver msm-pcm-voice requests probe deferral
759[ 1.134518] msm8x16-asoc-wcd sound.68: msm8x16_asoc_machine_probe: missing qcom,msm-mclk-freq in dt node
760[ 1.134543] msm8x16-asoc-wcd sound.68: default codec configured
761[ 1.134857] get_cdc_gpio_lines: Unable to get pinctrl cdc_lines_dmic_sus handle
762[ 1.134865] get_cdc_gpio_lines: Unable to get pinctrl cdc_lines_dmic_act handle
763[ 1.136286] msm8x16-asoc-wcd sound.68: ASoC: platform (null) not registered
764[ 1.136322] msm8x16-asoc-wcd sound.68: snd_soc_register_card failed (-517)
765[ 1.136359] platform sound.68: Driver msm8x16-asoc-wcd requests probe deferral
766[ 1.137260] u32 classifier
767[ 1.137268] Actions configured
768[ 1.137278] Netfilter messages via NETLINK v0.30.
769[ 1.137296] nfnl_acct: registering with nfnetlink.
770[ 1.137359] nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
771[ 1.137653] ctnetlink v0.93: registering with nfnetlink.
772[ 1.137727] NF_TPROXY: Transparent proxy support initialized, version 4.1.0
773[ 1.137734] NF_TPROXY: Copyright (c) 2006-2007 BalaBit IT Ltd.
774[ 1.137917] xt_time: kernel timezone is -0000
775[ 1.138311] ip_tables: (C) 2000-2006 Netfilter Core Team
776[ 1.138509] arp_tables: (C) 2002 David S. Miller
777[ 1.138553] TCP: cubic registered
778[ 1.138559] Initializing XFRM netlink socket
779[ 1.138789] NET: Registered protocol family 10
780[ 1.139621] mip6: Mobile IPv6
781[ 1.139658] ip6_tables: (C) 2000-2006 Netfilter Core Team
782[ 1.139791] sit: IPv6 over IPv4 tunneling driver
783[ 1.140239] NET: Registered protocol family 17
784[ 1.140270] NET: Registered protocol family 15
785[ 1.140342] Bridge firewalling registered
786[ 1.140357] Ebtables v2.0 registered
787[ 1.140513] Bluetooth: ffffffc073c7fd50
788[ 1.140540] Bluetooth: ffffffc073c7fd40Bluetooth: ffffffc073c7fd70
789[ 1.140551] Bluetooth: ffffffc073c7fd50Bluetooth: ffffffc073c7fd50
790[ 1.140568] Bluetooth: ffffffc073c7fd30Bluetooth: ffffffc073c7fd90
791[ 1.140583] Bluetooth: ffffffc073c7fd80<6>[ 1.140620] l2tp_core: L2TP core driver, V2.0
792[ 1.140635] l2tp_ppp: PPPoL2TP kernel driver, V2.0
793[ 1.140692] Key type dns_resolver registered
794[ 1.140864] LC709203:lc709203_parse_dt: soc_high_scaled = 990 soc_low_scaled = 0
795[ 1.143074] mmc0: BKOPS_EN bit = 0
796[ 1.156181] LC709203:set_battery_data:battery CPLD-351-CC loaded , appli:0x0038
797[ 1.157051] LC709203:lc709203_hw_init_by_battery:warm reset register value = 0x38
798[ 1.158590] LC709203:lc709203_hw_init_by_battery:IC_VERSION is 0x2AFF
799[ 1.158664] LC709203:lc709203_batt_temperature:this_chip is unavailable
800[ 1.159506] mmc0: new HS200 MMC card at address 0001
801[ 1.159801] mmcblk0: mmc0:0001 HAG4d 14.6 GiB
802[ 1.160001] mmcblk0rpmb: mmc0:0001 HAG4d partition 3 4.00 MiB
803[ 1.160571] devfreq gpubw: Couldn't update frequency transition information.
804[ 1.161092] LC709203:lc709203_batt_temperature:this_chip is unavailable
805[ 1.161226] LC709203:lc709203_batt_temperature:this_chip is unavailable
806[ 1.163187] GPT:first_usable_lbas don't match.
807[ 1.163197] GPT:34 != 3
808[ 1.163202] GPT:last_usable_lbas don't match.
809[ 1.163208] GPT:30785502 != 30785533
810[ 1.163214] GPT:num_partition_entries don't match: 0x20 != 0x4
811[ 1.163220] GPT:partition_entry_array_crc32 values don't match: 0x42e40de7 != 0x72d856bd
812[ 1.163226] GPT: Use GNU Parted to correct GPT errors.
813[ 1.163355] mmcblk0: p1 p2 p3 p4 p5 p6 p7 p8 p9 p10 p11 p12 p13 p14 p15 p16 p17 p18 p19 p20 p21 p22 p23 p24 p25 p26 p27 p28 p29
814[ 1.164922] cma: Assigned CMA region at 0 to qcom,mba-mem.159 device
815[ 1.168143] yl_pm8916_vbus_probe: ====probe enter===
816[ 1.168157] yl_pm8916_vbus_probe: battery supply not found deferring probe
817[ 1.168175] spmi yl_pm8916_vbus-11: Driver yulong,yl_pm8916_vbus requests probe deferral
818[ 1.168814] bq24157_sm_charger 4-006a: batt_temp_hot = 520, batt_temp_cold = 100,batt_temp_too_hot = 570, batt_temp_too_cold = 0
819[ 1.169294] bq24157_sm_charger 4-006a: this IC is BQ24517, probe
820[ 1.170076] BQ24157: bq24157_set_safe_reg: 0x06 Writing 0x79 : Reading 0x79
821[ 1.208035] get_yl_pm8916_vbus_status: this_chip is unavailable
822[ 1.208048] is_battery_present: this_chip is unavailable
823[ 1.222539] get_yl_pm8916_vbus_status: this_chip is unavailable
824[ 1.222557] get_yl_pm8916_batt_mvol: this_chip is unavailable, battery voltage use default value 3800mV
825[ 1.222568] get_yl_pm8916_batt_temp: this_chip is unavailable
826[ 1.222689] get_yl_pm8916_batt_temp: this_chip is unavailable
827[ 1.222740] get_yl_pm8916_vbus_status: this_chip is unavailable
828[ 1.222759] get_yl_pm8916_vbus_status: this_chip is unavailable
829[ 1.222767] is_battery_present: this_chip is unavailable
830[ 1.223509] BQ24157: bq24157_stat_irq_handler: bq24157 stat irq handler.
831[ 1.223574] spmi msm8x16_wcd_codec-14: Driver wcd-spmi-core requests probe deferral
832[ 1.223619] spmi msm8x16_wcd_codec-15: Driver wcd-spmi-core requests probe deferral
833[ 1.226235] msm8x16-asoc-wcd sound.68: msm8x16_asoc_machine_probe: missing qcom,msm-mclk-freq in dt node
834[ 1.226386] msm8x16-asoc-wcd sound.68: default codec configured
835[ 1.226846] get_cdc_gpio_lines: Unable to get pinctrl cdc_lines_dmic_sus handle
836[ 1.226855] get_cdc_gpio_lines: Unable to get pinctrl cdc_lines_dmic_act handle
837[ 1.228552] msm8x16-asoc-wcd sound.68: ASoC: CODEC (null) not registered
838[ 1.228589] msm8x16-asoc-wcd sound.68: snd_soc_register_card failed (-517)
839[ 1.228664] platform sound.68: Driver msm8x16-asoc-wcd requests probe deferral
840[ 1.228709] yl_pm8916_vbus_probe: ====probe enter===
841[ 1.228722] yl_pm8916_vbus_probe: -----------handler name=battery
842[ 1.228764] yl_pm8916_vbus_probe: Node name = qcom,bat-if
843[ 1.228780] yl_pm8916_vbus_probe: bat_if subtype=0x16
844[ 1.228787] yl_pm8916_vbus_get_irqs: Unable to get irq resource batt-pres-6
845[ 1.228793] yl_pm8916_vbus_probe: Node name = qcom,usb-chgpth
846[ 1.228808] yl_pm8916_vbus_probe: USB subtype=0x17
847[ 1.228815] yl_pm8916_vbus_probe: Node name = qcom,vm-bms
848[ 1.228820] yl_pm8916_vbus_probe: chip->base = 4000
849[ 1.229323] yl_pm8916_vbus_probe: LBC probed USB is connected
850[ 1.229388] yl_pm8916_vbus_probe: =====probe success====
851[ 1.229460] spmi msm8x16_wcd_codec-14: Driver wcd-spmi-core requests probe deferral
852[ 1.229499] spmi msm8x16_wcd_codec-15: Driver wcd-spmi-core requests probe deferral
853[ 1.229698] BQ24157: bq24157_external_power_changed: current_limit = 0
854[ 1.230606] BQ24157: bq24157_external_power_changed: current_limit = 0
855[ 1.230891] msm8x16-asoc-wcd sound.68: msm8x16_asoc_machine_probe: missing qcom,msm-mclk-freq in dt node
856[ 1.230911] msm8x16-asoc-wcd sound.68: default codec configured
857[ 1.231273] get_cdc_gpio_lines: Unable to get pinctrl cdc_lines_dmic_sus handle
858[ 1.231281] get_cdc_gpio_lines: Unable to get pinctrl cdc_lines_dmic_act handle
859[ 1.232991] msm8x16-asoc-wcd sound.68: ASoC: CODEC (null) not registered
860[ 1.233029] msm8x16-asoc-wcd sound.68: snd_soc_register_card failed (-517)
861[ 1.233069] platform sound.68: Driver msm8x16-asoc-wcd requests probe deferral
862[ 1.233551] Registering SWP/SWPB emulation handler
863[ 1.243916] Key type encrypted registered
864[ 1.262086] mmc1: new ultra high speed SDR104 SDHC card at address 0001
865[ 1.262357] mmcblk1: mmc1:0001 BB1QT 29.8 GiB
866[ 1.264704] mmcblk1: p1 p16 p17 p18 p20
867[ 1.350006] msm_otg 78d9000.usb: Avail curr from USB = 500
868[ 1.351027] BQ24157: bq24157_external_power_changed: current_limit = 500
869[ 1.355713] spk_vreg: disabling
870[ 1.355750] mem_acc_corner: disabling
871[ 1.355757] regulator-dummy: disabling
872[ 1.355848] spmi msm8x16_wcd_codec-14: Driver wcd-spmi-core requests probe deferral
873[ 1.355894] spmi msm8x16_wcd_codec-15: Driver wcd-spmi-core requests probe deferral
874[ 1.356747] msm8x16-asoc-wcd sound.68: msm8x16_asoc_machine_probe: missing qcom,msm-mclk-freq in dt node
875[ 1.356767] msm8x16-asoc-wcd sound.68: default codec configured
876[ 1.357104] get_cdc_gpio_lines: Unable to get pinctrl cdc_lines_dmic_sus handle
877[ 1.357111] get_cdc_gpio_lines: Unable to get pinctrl cdc_lines_dmic_act handle
878[ 1.358778] msm8x16-asoc-wcd sound.68: ASoC: CODEC (null) not registered
879[ 1.358816] msm8x16-asoc-wcd sound.68: snd_soc_register_card failed (-517)
880[ 1.358858] platform sound.68: Driver msm8x16-asoc-wcd requests probe deferral
881[ 1.360181] file system registered
882[ 1.360237] mbim_init: initialize 1 instances
883[ 1.360400] mbim_init: Initialized 1 ports
884[ 1.360408] mbim_bam_setup: no_ports:1
885[ 1.360567] mbim_bam_setup: Initialized 1 ports
886[ 1.361505] rndis_qc_init: initialize rndis QC instance
887[ 1.361872] android_usb gadget: Mass Storage Function, version: 2009/09/11
888[ 1.361904] android_usb gadget: Number of LUNs=2
889[ 1.361915] lun0: LUN: removable file: (no medium)
890[ 1.361922] lun1: LUN: removable file: (no medium)
891[ 1.362156] android_usb gadget: android_usb ready
892[ 1.362168] msm_hsusb msm_hsusb: [ci13xxx_start] hw_ep_max = 16
893[ 1.362197] msm_hsusb msm_hsusb: CI13XXX_CONTROLLER_RESET_EVENT received
894[ 1.362289] spmi msm8x16_wcd_codec-14: Driver wcd-spmi-core requests probe deferral
895[ 1.362318] spmi msm8x16_wcd_codec-15: Driver wcd-spmi-core requests probe deferral
896[ 1.362901] msm8x16-asoc-wcd sound.68: msm8x16_asoc_machine_probe: missing qcom,msm-mclk-freq in dt node
897[ 1.362918] msm8x16-asoc-wcd sound.68: default codec configured
898[ 1.363114] get_cdc_gpio_lines: Unable to get pinctrl cdc_lines_dmic_sus handle
899[ 1.363119] get_cdc_gpio_lines: Unable to get pinctrl cdc_lines_dmic_act handle
900[ 1.363493] BQ24157: bq24157_stat_irq_handler: bq24157 stat irq handler.
901[ 1.365034] msm8x16-asoc-wcd sound.68: ASoC: CODEC (null) not registered
902[ 1.365076] msm8x16-asoc-wcd sound.68: snd_soc_register_card failed (-517)
903[ 1.365124] platform sound.68: Driver msm8x16-asoc-wcd requests probe deferral
904[ 1.365607] input: gpio-keys as /devices/soc.0/gpio_keys.72/input/input2
905[ 1.365901] spmi msm8x16_wcd_codec-14: Driver wcd-spmi-core requests probe deferral
906[ 1.365945] spmi msm8x16_wcd_codec-15: Driver wcd-spmi-core requests probe deferral
907[ 1.366061] <<-GTP-INFO->> GTP driver install.
908[ 1.366906] msm8x16-asoc-wcd sound.68: msm8x16_asoc_machine_probe: missing qcom,msm-mclk-freq in dt node
909[ 1.366926] msm8x16-asoc-wcd sound.68: default codec configured
910[ 1.366959] <<-GTP-INFO->> GTP Driver Version:V2.1.2<2013/12/31>
911[ 1.366967] <<-GTP-INFO->> GTP Driver build@08:28:34,Dec 16 2019
912[ 1.366973] <<-GTP-INFO->> GTP I2C Address:0x5d
913[ 1.367005] [gt]:reset-gpio = 914
914[ 1.367032] [gt]:irq-gpio = 915
915[ 1.367052] [gt]:irq-flag = 2
916[ 1.367058] [gt]:screen x,y = 720, 1280
917[ 1.367075] [gt]:pwr_en=0, sleep_pwr_en=0, vcc_i2c=(null), vdd=(null)
918[ 1.367083] [gt]:x=720,y=1280.
919[ 1.367088] [gt]:goodix_ts_gpio_init.
920[ 1.367212] [gt]:goodix_ts_power.
921[ 1.367237] get_cdc_gpio_lines: Unable to get pinctrl cdc_lines_dmic_sus handle
922[ 1.367245] get_cdc_gpio_lines: Unable to get pinctrl cdc_lines_dmic_act handle
923[ 1.368909] msm8x16-asoc-wcd sound.68: ASoC: CODEC (null) not registered
924[ 1.368945] msm8x16-asoc-wcd sound.68: snd_soc_register_card failed (-517)
925[ 1.368985] platform sound.68: Driver msm8x16-asoc-wcd requests probe deferral
926[ 1.450165] i2c-msm-v2 78b9000.i2c: msm_bus_scale_register_client(mstr-id:86):0x13 (ok)
927[ 1.452125] <<-GTP-INFO->> Esd started
928[ 1.454226] <<-GTP-INFO->> IC force update flag:0xbe
929[ 1.456416] <<-GTP-INFO->> Firmware length:90112
930[ 1.456424] <<-GTP-INFO->> Don't meet the third condition.
931[ 1.456429] <<-GTP-ERROR->> File VID <= IC VID, update aborted!
932[ 1.456435] <<-GTP-ERROR->> [update_proc]Check *.bin file fail.
933[ 1.459809] sps: BAM device 0x0000000007884000 is not registered yet.
934[ 1.459836] sps:BAM 0x0000000007884000 is registered.
935[ 1.460111] sps:BAM 0x0000000007884000 (va:0xffffff8001740000) enabled: ver:0x18, number of pipes:16
936[ 1.493413] input: goodix as /devices/virtual/input/input3
937[ 1.493646] <<-GTP-INFO->> GTP works in interrupt mode.
938[ 1.494641] IC Version: 970_1039[GTP] create proc entry!
939[ 1.495187] BJ_BSP_Driver:CP_Touchscreen:ops add success!
940[ 1.495193] tw get charger status is: 1
941[ 1.495718] <<-GTP-INFO->> report_rate,*rate=12 ms one point
942[ 1.495735] <<-GTP-INFO->> goodix_ts_probe sysfs_create_group() success
943[ 1.495742] [gt]:gt probe over 0x46, GTP_ESD_PROTECT=1
944[ 1.495828] spmi msm8x16_wcd_codec-14: Driver wcd-spmi-core requests probe deferral
945[ 1.495992] spmi msm8x16_wcd_codec-15: Driver wcd-spmi-core requests probe deferral
946[ 1.496216] pa12200001_parse_dt:pa12_ps_th_high=40
947[ 1.496223] pa12200001_parse_dt:pa12_ps_th_low=25
948[ 1.496228] pa12200001_parse_dt:pa12_ps_th_max=255
949[ 1.496233] pa12200001_parse_dt:pa12_ps_th_min=0
950[ 1.496238] pa12200001_parse_dt:pa12_ps_offset_default=5
951[ 1.496243] pa12200001_parse_dt:pa12_als_gain=1
952[ 1.496248] pa12200001_parse_dt:pa12_led_curr=0
953[ 1.496253] pa12200001_parse_dt:pa12_ps_prst=2
954[ 1.496258] pa12200001_parse_dt:pa12_als_prst=0
955[ 1.496263] pa12200001_parse_dt:pa12_int_set=1
956[ 1.496268] pa12200001_parse_dt:pa12_ps_mode=3
957[ 1.496273] pa12200001_parse_dt:pa12_int_type=1
958[ 1.496278] pa12200001_parse_dt:pa12_ps_period=1
959[ 1.496283] pa12200001_parse_dt:pa12_als_period=0
960[ 1.496288] pa12200001_parse_dt:pa12_ps_fast_run_cal=0
961[ 1.496293] pa12200001_parse_dt:pa12_fast_cal_tolerance=50
962[ 1.496298] pa12200001_parse_dt:pa12_ps_offset_max=100
963[ 1.496769] msm8x16-asoc-wcd sound.68: msm8x16_asoc_machine_probe: missing qcom,msm-mclk-freq in dt node
964[ 1.496787] msm8x16-asoc-wcd sound.68: default codec configured
965[ 1.497055] get_cdc_gpio_lines: Unable to get pinctrl cdc_lines_dmic_sus handle
966[ 1.497061] get_cdc_gpio_lines: Unable to get pinctrl cdc_lines_dmic_act handle
967[ 1.498696] msm8x16-asoc-wcd sound.68: ASoC: CODEC (null) not registered
968[ 1.498732] msm8x16-asoc-wcd sound.68: snd_soc_register_card failed (-517)
969[ 1.498773] platform sound.68: Driver msm8x16-asoc-wcd requests probe deferral
970[ 1.501241] input: PA12200001_light as /devices/virtual/input/input4
971[ 1.501463] input: PA12200001_proximity as /devices/virtual/input/input5
972[ 1.501908] pa12200001 0-001e: Driver version 1.00 enabled
973[ 1.501963] i2c-core: driver [pa12200001] using legacy suspend method
974[ 1.501969] i2c-core: driver [pa12200001] using legacy resume method
975[ 1.501992] spmi msm8x16_wcd_codec-14: Driver wcd-spmi-core requests probe deferral
976[ 1.502037] spmi msm8x16_wcd_codec-15: Driver wcd-spmi-core requests probe deferral
977[ 1.502049] qcom,qpnp-rtc qpnp-rtc-4: setting system clock to 1970-01-12 04:48:24 UTC (967704)
978[ 1.502398] battery_current_limit qcom,bcl.16: battery_current_limit:probe_btm_properties Error reading key:qcom,ibat-monitor. ret = -19
979[ 1.502946] msm8x16-asoc-wcd sound.68: msm8x16_asoc_machine_probe: missing qcom,msm-mclk-freq in dt node
980[ 1.502965] msm8x16-asoc-wcd sound.68: default codec configured
981[ 1.503344] get_cdc_gpio_lines: Unable to get pinctrl cdc_lines_dmic_sus handle
982[ 1.503353] get_cdc_gpio_lines: Unable to get pinctrl cdc_lines_dmic_act handle
983[ 1.504977] msm_thermal:interrupt_mode_init Interrupt mode init
984[ 1.505228] msm8x16-asoc-wcd sound.68: ASoC: CODEC (null) not registered
985[ 1.505270] msm8x16-asoc-wcd sound.68: snd_soc_register_card failed (-517)
986[ 1.505315] platform sound.68: Driver msm8x16-asoc-wcd requests probe deferral
987[ 1.505432] spmi msm8x16_wcd_codec-14: Driver wcd-spmi-core requests probe deferral
988[ 1.505473] spmi msm8x16_wcd_codec-15: Driver wcd-spmi-core requests probe deferral
989[ 1.508765] msm8x16-asoc-wcd sound.68: msm8x16_asoc_machine_probe: missing qcom,msm-mclk-freq in dt node
990[ 1.508786] msm8x16-asoc-wcd sound.68: default codec configured
991[ 1.509083] get_cdc_gpio_lines: Unable to get pinctrl cdc_lines_dmic_sus handle
992[ 1.509092] get_cdc_gpio_lines: Unable to get pinctrl cdc_lines_dmic_act handle
993[ 1.510980] msm8x16-asoc-wcd sound.68: ASoC: CODEC (null) not registered
994[ 1.511022] msm8x16-asoc-wcd sound.68: snd_soc_register_card failed (-517)
995[ 1.511067] platform sound.68: Driver msm8x16-asoc-wcd requests probe deferral
996[ 1.511159] spmi msm8x16_wcd_codec-14: Driver wcd-spmi-core requests probe deferral
997[ 1.511205] spmi msm8x16_wcd_codec-15: Driver wcd-spmi-core requests probe deferral
998[ 1.511909] msm8x16-asoc-wcd sound.68: msm8x16_asoc_machine_probe: missing qcom,msm-mclk-freq in dt node
999[ 1.511928] msm8x16-asoc-wcd sound.68: default codec configured
1000[ 1.512240] get_cdc_gpio_lines: Unable to get pinctrl cdc_lines_dmic_sus handle
1001[ 1.512248] get_cdc_gpio_lines: Unable to get pinctrl cdc_lines_dmic_act handle
1002[ 1.513044] qcom,cc-debug-8936 1874000.qcom,cc-debug: Registered Debug Mux successfully
1003[ 1.514090] msm8x16-asoc-wcd sound.68: ASoC: CODEC (null) not registered
1004[ 1.514148] clock_late_init: Removing enables held for handed-off clocks
1005[ 1.514476] msm8x16-asoc-wcd sound.68: snd_soc_register_card failed (-517)
1006[ 1.514522] platform sound.68: Driver msm8x16-asoc-wcd requests probe deferral
1007[ 1.514611] spmi msm8x16_wcd_codec-14: Driver wcd-spmi-core requests probe deferral
1008[ 1.514649] spmi msm8x16_wcd_codec-15: Driver wcd-spmi-core requests probe deferral
1009[ 1.515346] msm8x16-asoc-wcd sound.68: msm8x16_asoc_machine_probe: missing qcom,msm-mclk-freq in dt node
1010[ 1.515363] msm8x16-asoc-wcd sound.68: default codec configured
1011[ 1.515632] get_cdc_gpio_lines: Unable to get pinctrl cdc_lines_dmic_sus handle
1012[ 1.515639] get_cdc_gpio_lines: Unable to get pinctrl cdc_lines_dmic_act handle
1013[ 1.517368] msm8x16-asoc-wcd sound.68: ASoC: CODEC (null) not registered
1014[ 1.517406] msm8x16-asoc-wcd sound.68: snd_soc_register_card failed (-517)
1015[ 1.517448] platform sound.68: Driver msm8x16-asoc-wcd requests probe deferral
1016[ 1.517904] ALSA device list:
1017[ 1.517912] No soundcards found.
1018[ 1.518064] Warning: unable to open an initial console.
1019[ 1.518229] Freeing unused kernel memory: 428K (ffffffc000e0c000 - ffffffc000e77000)
1020[ 1.549214] systemd-udevd[274]: starting version 232
1021[ 2.410629] Begin: Running /scripts/nfs-top ... done.
1022[ 2.410919] Begin: Running /scripts/nfs-premount ... done.
1023[ 2.411179] Begin: Running /scripts/local-top ... done.
1024[ 2.411374] Begin: Running /scripts/local-premount ... done.
1025[ 2.430475] initrd: checking filesystem integrity for the userdata partition
1026[ 2.434395] EXT4-fs (mmcblk0p29): couldn't mount as ext3 due to feature incompatibilities
1027[ 2.435066] EXT4-fs (mmcblk0p29): couldn't mount as ext2 due to feature incompatibilities
1028[ 2.440328] EXT4-fs (mmcblk0p29): mounted filesystem with ordered data mode. Opts: errors=remount-ro
1029[ 2.469818] initrd: checking filesystem for userdata took (including e2fsck) 0 seconds
1030[ 2.476633] dumpe2fs 1.43.4 (31-Jan-2017)
1031[ 2.480955] initrd: mounting /dev/mmcblk0p29
1032[ 2.511800] EXT4-fs: Warning: mounting with data=journal disables delayed allocation and O_DIRECT support!
1033[ 2.511821] EXT4-fs (mmcblk0p29): couldn't mount as ext3 due to feature incompatibilities
1034[ 2.512475] EXT4-fs (mmcblk0p29): Mount option "data=journal" incompatible with ext2
1035[ 2.516899] EXT4-fs (mmcblk0p29): mounted filesystem with journalled data mode. Opts: discard,data=journal
1036[ 2.521190] initrd: boot mode: halium
1037[ 2.521773] initrd: Halium rootfs is /tmpmnt/rootfs.img
1038[ 2.522390] initrd: mounting system rootfs at /halium-system
1039[ 2.526754] EXT4-fs (loop0): couldn't mount as ext3 due to feature incompatibilities
1040[ 2.527303] EXT4-fs (loop0): couldn't mount as ext2 due to feature incompatibilities
1041[ 2.535052] EXT4-fs (loop0): mounted filesystem with ordered data mode. Opts: (null)
1042[ 2.551523] initrd: mounting /tmpmnt/rootfs.img (user mode)
1043[ 2.553151] EXT4-fs (loop0): re-mounted. Opts: data=ordered
1044[ 2.558625] initrd: mounting android system image (/tmpmnt/system.img) ro, in /android-system (system mode)
1045[ 2.558779] initrd: mounting android system image from userdata partition
1046[ 2.579101] initrd: extracting android ramdisk
1047[ 2.797713] 7856 blocks
1048[ 2.798811] initrd: Normal boot
1049[ 2.820660] initrd: device is YUREKA
1050[ 2.829319] initrd: Adding bind-mounts to /root/etc/fstab
1051[ 3.388552] initrd: checking fstab /root/var/lib/lxc/android/rootfs/fstab* for additional mount points
1052[ 3.419966] initrd: checking mount label mmcblk0p27
1053[ 3.421039] initrd: mounting /dev/mmcblk0p27 as /root/android//cache
1054[ 3.433525] initrd: checking mount label mmcblk0p26
1055[ 3.434639] initrd: mounting /dev/mmcblk0p26 as /root/android//persist
1056[ 3.446209] initrd: checking mount label mmcblk0p21
1057[ 3.447339] initrd: mounting /dev/mmcblk0p21 as /root/android//boot
1058[ 3.451065] mount: mounting /dev/mmcblk0p21 on /root/android//boot failed: No such device
1059[ 3.457407] initrd: checking mount label recovery
1060[ 3.458199] initrd: mounting /dev/disk/by-partlabel/recovery as /root/android//recovery
1061[ 3.461546] mount: mounting /dev/disk/by-partlabel/recovery on /root/android//recovery failed: No such device
1062[ 3.467986] initrd: checking mount label misc
1063[ 3.468785] initrd: mounting /dev/disk/by-partlabel/misc as /root/android//misc
1064[ 3.472485] mount: mounting /dev/disk/by-partlabel/misc on /root/android//misc failed: No such device
1065[ 3.478821] initrd: checking mount label mmcblk0p1
1066[ 3.479891] initrd: mounting /dev/mmcblk0p1 as /root/android//firmware
1067[ 3.495944] initrd: checking mount label frp
1068[ 3.505870] initrd: checking mount label mmc_host*
1069[ 3.512477] initrd: checking mount label msm_hsusb*
1070[ 3.513941] initrd: moving Android system to /android/system
1071[ 3.521883] mount: mounting /root/android/system/lib/modules on /root/lib/modules failed: No such file or directory
1072[ 3.523599] Begin: Running /scripts/local-bottom ... done.
1073[ 3.523844] done.
1074[ 3.530611] Begin: Running /scripts/nfs-bottom ... done.
1075[ 3.530983] Begin: Running /scripts/init-bottom ... done.
1076[ 3.544481] run-init: opening console: No such device
1077[ 3.544663] Target filesystem doesn't have requested /sbin/init.
1078[ 3.545568] run-init: opening console: No such device
1079[ 3.547065] run-init: opening console: No such device
1080[ 3.548144] run-init: opening console: No such device
1081[ 3.549523] run-init: opening console: No such device
1082[ 3.550667] run-init: opening console: No such device
1083[ 3.552146] No init found. Try passing init= bootarg.
1084[ 3.556198] enable_store: android_usb: already disabled
1085[ 3.556397] msm_hsusb msm_hsusb: CI13XXX_CONTROLLER_CONNECT_EVENT received
1086[ 3.699072] msm_otg 78d9000.usb: Avail curr from USB = 100
1087[ 3.699313] i2c-msm-v2 78b8000.i2c: msm_bus_scale_register_client(mstr-id:86):0x14 (ok)
1088[ 3.699641] android_work: android_work: did not send uevent (0 0 0000000000000000)
1089[ 3.700255] BQ24157: bq24157_external_power_changed: current_limit = 100
1090[ 3.714307] i2c-msm-v2 78b6000.i2c: msm_bus_scale_register_client(mstr-id:86):0x15 (ok)
1091[ 3.825584] android_work: android_work: sent uevent USB_STATE=CONNECTED
1092[ 3.829387] android_work: android_work: sent uevent USB_STATE=DISCONNECTED
1093[ 3.830116] BQ24157: bq24157_external_power_changed: current_limit = 100
1094[ 3.973773] android_work: android_work: sent uevent USB_STATE=CONNECTED
1095[ 3.977510] android_work: android_work: sent uevent USB_STATE=DISCONNECTED
1096[ 3.978240] BQ24157: bq24157_external_power_changed: current_limit = 100
1097[ 4.057939] rndis_function_bind_config: rndis_function_bind_config MAC: 00:00:00:00:00:00
1098[ 4.058009] android_usb gadget: using random self ethernet address
1099[ 4.058032] android_usb gadget: using random host ethernet address
1100[ 4.058444] rndis0: MAC ae:04:d0:f2:1b:20
1101[ 4.058453] rndis0: HOST MAC 92:d7:8c:8a:3c:1a
1102[ 4.058525] msm_hsusb msm_hsusb: CI13XXX_CONTROLLER_CONNECT_EVENT received
1103[ 4.059817] IPv6: ADDRCONF(NETDEV_UP): rndis0: link is not ready
1104[ 4.061571] msm_otg 78d9000.usb: Avail curr from USB = 2
1105[ 4.061586] msm_hsusb msm_hsusb: CI13XXX_CONTROLLER_SUSPEND_EVENT received
1106[ 4.061605] android_work: android_work: did not send uevent (0 0 0000000000000000)
1107[ 4.062392] BQ24157: bq24157_external_power_changed: current_limit = 2
1108[ 4.062475] ########################## starting dhcpd
1109[ 4.063703] ########################## starting telnetd
1110[ 4.064951] ########################## usb_info: Halium initrd Debug telnet on port 23 on rndis0 192.168.2.15 - also running udhcpd
1111[ 4.103969] msm_hsusb msm_hsusb: CI13XXX_CONTROLLER_RESUME_EVENT received
1112[ 4.103991] msm_otg 78d9000.usb: Avail curr from USB = 100
1113[ 4.104017] android_work: android_work: did not send uevent (0 0 0000000000000000)
1114[ 4.104779] BQ24157: bq24157_external_power_changed: current_limit = 100
1115[ 4.173295] android_work: android_work: did not send uevent (0 0 0000000000000000)
1116[ 4.174039] BQ24157: bq24157_external_power_changed: current_limit = 100
1117[ 4.549577] android_work: android_work: sent uevent USB_STATE=CONNECTED
1118[ 4.553293] android_work: android_work: sent uevent USB_STATE=DISCONNECTED
1119[ 4.554022] BQ24157: bq24157_external_power_changed: current_limit = 100
1120[ 4.697436] android_work: android_work: sent uevent USB_STATE=CONNECTED
1121[ 4.735082] android_usb gadget: high-speed config #1: 86000c8.android_usb
1122[ 4.735420] msm_otg 78d9000.usb: Avail curr from USB = 500
1123[ 4.735460] IPv6: ADDRCONF(NETDEV_CHANGE): rndis0: link becomes ready
1124[ 4.736384] BQ24157: bq24157_external_power_changed: current_limit = 500
1125[ 4.786605] android_work: android_work: sent uevent USB_STATE=CONFIGURED
1126[ 5.067280] ps: invalid option -- 'w'
1127[ 5.074573] BusyBox v1.22.1 (Debian 1:1.22.0-19+b3) multi-call binary.
1128[ 5.074595]
1129[ 5.074595] Usage: ps [-o COL1,COL2=HEADER] [-T]
1130[ 5.074595]
1131[ 5.074595] Show list of processes
1132[ 5.074595]
1133[ 5.074595] -o COL1,COL2=HEADER Select columns for display
1134[ 5.074595] -T Show threads
1135[ 5.074595]
1136[ 5.090937] netstat: invalid option -- 'p'
1137[ 5.098198] BusyBox v1.22.1 (Debian 1:1.22.0-19+b3) multi-call binary.
1138[ 5.098220]
1139[ 5.098220] Usage: netstat [-ral] [-tuwx] [-en]
1140[ 5.098220]
1141[ 5.098220] Display networking information
1142[ 5.098220]
1143[ 5.098220] -r Routing table
1144[ 5.098220] -a All sockets
1145[ 5.098220] -l Listening sockets
1146[ 5.098220] Else: connected sockets
1147[ 5.098220] -t TCP sockets
1148[ 5.098220] -u UDP sockets
1149[ 5.098220] -w Raw sockets
1150[ 5.098220] -x Unix sockets
1151[ 5.098220] Else: all socket types
1152[ 5.098220] -e Other/more information
1153[ 5.098220] -n Don't resolve names
1154[ 5.098220]
1155[ 5.099161] cat: write error: Invalid argument
1156[ 5.524477] ########################## Beginning inject loop
1157[ 12.277567] BQ24157: bq24157_temp_appropriate_charging: setting 900 mA, 1750, temp = 349, batt_temp_status = 4