· 8 years ago · Dec 13, 2017, 12:10 AM
1* daemon not running. starting it now on port 5037 *
2* daemon started successfully *
3<6>[ 0.000000,0] Initializing cgroup subsys cpuset
4<6>[ 0.000000,0] Initializing cgroup subsys cpu
5<6>[ 0.000000,0] Initializing cgroup subsys cpuacct
6<5>[ 0.000000,0] Linux version 3.18.63-lineage-gb0189e4-dirty (jenkins@jobinrjohnson) (gcc version 4.9 20150123 (prerelease) (GCC) ) #1 SMP PREEMPT Sun Dec 10 14:09:40 UTC 2017
7<4>[ 0.000000,0] CPU: AArch64 Processor [410fd034] revision 4
8<6>[ 0.000000,0] alternatives: enabling workaround for ARM erratum 845719
9<6>[ 0.000000,0] Machine: cedric
10<6>[ 0.000000,0] efi: Getting EFI parameters from FDT:
11<6>[ 0.000000,0] efi: UEFI not found.
12<6>[ 0.000000,0] Reserved memory: reserved region for node 'other_ext_region@0': base 0x0000000084300000, size 37 MiB
13<6>[ 0.000000,0] Reserved memory: reserved region for node 'modem_region@0': base 0x0000000086800000, size 80 MiB
14<6>[ 0.000000,0] Reserved memory: reserved region for node 'adsp_fw_region@0': base 0x000000008b800000, size 17 MiB
15<6>[ 0.000000,0] Reserved memory: reserved region for node 'wcnss_fw_region@0': base 0x000000008c900000, size 7 MiB
16<6>[ 0.000000,0] Reserved memory: reserved region for node 'splash_region@83000000': base 0x0000000090000000, size 20 MiB
17<6>[ 0.000000,0] Reserved memory: reserved region for node 'ramoops_mem_region': base 0x00000000ae000000, size 0 MiB
18<6>[ 0.000000,0] Reserved memory: reserved region for node 'tzlog_bck_region': base 0x00000000ae400000, size 0 MiB
19<6>[ 0.000000,0] Reserved memory: reserved region for node 'wdog_cpuctx_region': base 0x00000000ae800000, size 0 MiB
20<6>[ 0.000000,0] Removed memory: created DMA memory pool at 0x0000000084300000, size 37 MiB
21<6>[ 0.000000,0] Reserved memory: initialized node other_ext_region@0, compatible id removed-dma-pool
22<6>[ 0.000000,0] Removed memory: created DMA memory pool at 0x0000000086800000, size 80 MiB
23<6>[ 0.000000,0] Reserved memory: initialized node modem_region@0, compatible id removed-dma-pool
24<6>[ 0.000000,0] Removed memory: created DMA memory pool at 0x000000008b800000, size 17 MiB
25<6>[ 0.000000,0] Reserved memory: initialized node adsp_fw_region@0, compatible id removed-dma-pool
26<6>[ 0.000000,0] Removed memory: created DMA memory pool at 0x000000008c900000, size 7 MiB
27<6>[ 0.000000,0] Reserved memory: initialized node wcnss_fw_region@0, compatible id removed-dma-pool
28<6>[ 0.000000,0] Reserved memory: allocated memory for 'venus_region@0' node: base 0x000000008f800000, size 8 MiB
29<6>[ 0.000000,0] Reserved memory: created CMA memory pool at 0x000000008f800000, size 8 MiB
30<6>[ 0.000000,0] Reserved memory: initialized node venus_region@0, compatible id shared-dma-pool
31<6>[ 0.000000,0] Reserved memory: allocated memory for 'secure_region@0' node: base 0x00000000d9000000, size 112 MiB
32<6>[ 0.000000,0] Reserved memory: created CMA memory pool at 0x00000000d9000000, size 112 MiB
33<6>[ 0.000000,0] Reserved memory: initialized node secure_region@0, compatible id shared-dma-pool
34<6>[ 0.000000,0] Reserved memory: allocated memory for 'qseecom_region@0' node: base 0x00000000d8000000, size 16 MiB
35<6>[ 0.000000,0] Reserved memory: created CMA memory pool at 0x00000000d8000000, size 16 MiB
36<6>[ 0.000000,0] Reserved memory: initialized node qseecom_region@0, compatible id shared-dma-pool
37<6>[ 0.000000,0] Reserved memory: allocated memory for 'adsp_region@0' node: base 0x00000000d7c00000, size 4 MiB
38<6>[ 0.000000,0] Reserved memory: created CMA memory pool at 0x00000000d7c00000, size 4 MiB
39<6>[ 0.000000,0] Reserved memory: initialized node adsp_region@0, compatible id shared-dma-pool
40<6>[ 0.000000,0] cma: Reserved 16 MiB at 0x00000000d6c00000
41<7>[ 0.000000,0] On node 0 totalpages: 770660
42<7>[ 0.000000,0] DMA zone: 12288 pages used for memmap
43<7>[ 0.000000,0] DMA zone: 0 pages reserved
44<7>[ 0.000000,0] DMA zone: 770660 pages, LIFO batch:31
45<6>[ 0.000000,0] psci: probing for conduit method from DT.
46<6>[ 0.000000,0] psci: PSCIv1.0 detected in firmware.
47<6>[ 0.000000,0] psci: Using standard PSCI v0.2 function IDs
48<6>[ 0.000000,0] psci: Initializing psci_cpu_init
49<6>[ 0.000000,0] psci: Initializing psci_cpu_init
50<6>[ 0.000000,0] psci: Initializing psci_cpu_init
51<6>[ 0.000000,0] psci: Initializing psci_cpu_init
52<6>[ 0.000000,0] psci: Initializing psci_cpu_init
53<6>[ 0.000000,0] psci: Initializing psci_cpu_init
54<6>[ 0.000000,0] psci: Initializing psci_cpu_init
55<6>[ 0.000000,0] PERCPU: Embedded 15 pages/cpu @ffffffc0b69d5000 s22656 r8192 d30592 u61440
56<7>[ 0.000000,0] pcpu-alloc: s22656 r8192 d30592 u61440 alloc=15*4096
57<7>[ 0.000000,0] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 [0] 4 [0] 5 [0] 6 [0] 7
58<4>[ 0.000000,0] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 758372
59<5>[ 0.000000,0] Kernel command line: sched_enable_hmp=1 console=null androidboot.hardware=qcom user_debug=30 msm_rtb.filter=0x237 ehci-hcd.park=3 androidboot.bootdevice=7824900.sdhci lpm_levels.sleep_disabled=1 vmalloc=350M androidboot.selinux=permissive buildvariant=eng androidboot.emmc=true androidboot.serialno=ZY3223M78H androidboot.baseband=msm androidboot.mode=normal androidboot.device=cedric androidboot.hwrev=0x8500 androidboot.radio=India androidboot.powerup_reason=0x00000100 androidboot.bootreason=charger msm_poweroff.download_mode=0 androidboot.fsg-id= androidboot.wifimacaddr=F0:D7:AA:02:C2:34,F0:D7:AA:02:C2:35 androidboot.btmacaddr=F0:D7:AA:02:C2:33 mdss_mdp.panel=1:dsi:0:qcom,mdss_dsi_mot_tianma_497_1080p_video_v0 androidboot.bootloader=0xB812 androidboot.carrier=amzin androidboot.poweroff_alarm=0 androidboot.build_vars=black androidboot.hardware.sku=XT1677 androidboot.secure_hardware=1 androidboot.bl_state=2 androidboot.cid=0x32 androidboot.uid=27478D3800000000000000000000 andro<6>[ 0.000000,0] PID hash table entries: 4096 (order: 3, 32768 bytes)
60<6>[ 0.000000,0] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
61<6>[ 0.000000,0] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
62<4>[ 0.000000,0] Memory: 2713776K/3082640K available (14500K kernel code, 1865K rwdata, 7872K rodata, 508K init, 3124K bss, 368864K reserved)
63<5>[ 0.000000,0] Virtual kernel memory layout:
64<5>[ 0.000000,0] vmalloc : 0xffffff8000000000 - 0xffffffbdbfff0000 ( 246 GB)
65<5>[ 0.000000,0] vmemmap : 0xffffffbdc0000000 - 0xffffffbfc0000000 ( 8 GB maximum)
66<5>[ 0.000000,0] 0xffffffbdc0800000 - 0xffffffbdc3800000 ( 48 MB actual)
67<5>[ 0.000000,0] PCI I/O : 0xffffffbffa000000 - 0xffffffbffb000000 ( 16 MB)
68<5>[ 0.000000,0] fixed : 0xffffffbffbdfd000 - 0xffffffbffbdff000 ( 8 KB)
69<5>[ 0.000000,0] modules : 0xffffffbffc000000 - 0xffffffc000000000 ( 64 MB)
70<5>[ 0.000000,0] memory : 0xffffffc000000000 - 0xffffffc0c0000000 ( 3072 MB)
71<5>[ 0.000000,0] .init : 0xffffffc00165c000 - 0xffffffc0016db000 ( 508 KB)
72<5>[ 0.000000,0] .text : 0xffffffc000080000 - 0xffffffc00165b284 ( 22381 KB)
73<5>[ 0.000000,0] .data : 0xffffffc0016f5000 - 0xffffffc0018c7400 ( 1865 KB)
74<6>[ 0.000000,0] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
75<6>[ 0.000000,0] HMP scheduling enabled.
76<6>[ 0.000000,0] Preemptible hierarchical RCU implementation.
77<6>[ 0.000000,0] CONFIG_RCU_FANOUT set to non-default value of 32
78<6>[ 0.000000,0] RCU dyntick-idle grace-period acceleration is enabled.
79<4>[ 0.000000,0]
80<4>[ 0.000000,0] **********************************************************
81<4>[ 0.000000,0] ** NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE **
82<4>[ 0.000000,0] ** **
83<4>[ 0.000000,0] ** trace_printk() being used. Allocating extra memory. **
84<4>[ 0.000000,0] ** **
85<4>[ 0.000000,0] ** This means that this is a DEBUG kernel and it is **
86<4>[ 0.000000,0] ** unsafe for produciton use. **
87<4>[ 0.000000,0] ** **
88<4>[ 0.000000,0] ** If you see this message and you are not debugging **
89<4>[ 0.000000,0] ** the kernel, report this immediately to your vendor! **
90<4>[ 0.000000,0] ** **
91<4>[ 0.000000,0] ** NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE **
92<4>[ 0.000000,0] **********************************************************
93<6>[ 0.000000,0] NR_IRQS:64 nr_irqs:64 0
94<4>[ 0.000000,0] mpm_init_irq_domain(): Cannot find irq controller for qcom,gpio-parent
95<3>[ 0.000000,0] MPM 1 irq mapping errored -517
96<6>[ 0.000000,0] Offload RCU callbacks from all CPUs
97<6>[ 0.000000,0] Offload RCU callbacks from CPUs: 0-7.
98<6>[ 0.000000,0] Architected cp15 and mmio timer(s) running at 19.20MHz (virt/virt).
99<6>[ 0.000005,0] sched_clock: 56 bits at 19MHz, resolution 52ns, wraps every 3579139424256ns
100<6>[ 0.000019,0] Switched to clocksource arch_sys_counter
101<6>[ 0.000695,0] Calibrating delay loop (skipped), value calculated using timer frequency.. 38.00 BogoMIPS (lpj=64000)
102<6>[ 0.000708,0] pid_max: default: 32768 minimum: 301
103<6>[ 0.000807,0] Security Framework initialized
104<6>[ 0.000824,0] SELinux: Initializing.
105<7>[ 0.000862,0] SELinux: Starting in permissive mode
106<6>[ 0.000918,0] Mount-cache hash table entries: 8192 (order: 4, 65536 bytes)
107<6>[ 0.000930,0] Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes)
108<6>[ 0.001751,0] Initializing cgroup subsys freezer
109<3>[ 0.002391,0] /cpus/cpu@100: Missing clock-frequency property
110<3>[ 0.002411,0] /cpus/cpu@101: Missing clock-frequency property
111<3>[ 0.002430,0] /cpus/cpu@102: Missing clock-frequency property
112<3>[ 0.002451,0] /cpus/cpu@103: Missing clock-frequency property
113<3>[ 0.002473,0] /cpus/cpu@0: Missing clock-frequency property
114<3>[ 0.002498,0] /cpus/cpu@1: Missing clock-frequency property
115<3>[ 0.002525,0] /cpus/cpu@2: Missing clock-frequency property
116<3>[ 0.002553,0] /cpus/cpu@3: Missing clock-frequency property
117<6>[ 0.002600,0] hw perfevents: enabled with arm/armv8-pmuv3 PMU driver, 7 counters available
118<6>[ 0.002639,0] EFI services will not be available.
119<4>[ 0.002945,0] NOHZ: local_softirq_pending 02
120<4>[ 0.003365,0] NOHZ: local_softirq_pending 02
121<6>[ 0.007928,0] MSM Memory Dump base table set up
122<6>[ 0.007951,0] MSM Memory Dump apps data table set up
123<6>[ 0.008013,0] Configuring XPU violations to be fatal errors
124<6>[ 0.009717,0] cpu_clock_a53_init_little: A53 Power clocks configured
125<6>[ 0.031368,0] Brought up 8 CPUs
126<6>[ 0.031382,0] SMP: Total of 8 processors activated.
127<6>[ 0.031473,0] alternatives: patching kernel code
128<6>[ 0.036570,0] DMI not present or invalid.
129<6>[ 0.043919,0] pinctrl core: initialized pinctrl subsystem
130<6>[ 0.044459,0] regulator-dummy: no parameters
131<6>[ 0.121253,0] NET: Registered protocol family 16
132<4>[ 0.125174,0] msm_pm_tz_boot_init: set warmboot address failed
133<3>[ 0.125202,0] scm_call failed: func id 0x42000101, ret: -1, syscall returns: 0x0, 0x0, 0x0
134<6>[ 0.130147,1] cpuidle: using governor ladder
135<6>[ 0.136816,2] cpuidle: using governor menu
136<6>[ 0.143447,2] cpuidle: using governor qcom
137<6>[ 0.145482,2] vdso: 2 pages (1 code @ ffffffc0016fd000, 1 data @ ffffffc0016fc000)
138<6>[ 0.146541,2] software IO TLB [mem 0xd1000000-0xd1400000] (4MB) mapped at [ffffffc0b1000000-ffffffc0b13fffff]
139<6>[ 0.147692,2] DMA: preallocated 256 KiB pool for atomic allocations
140<4>[ 0.154897,2] __of_mpm_init(): MPM driver mapping exists
141<3>[ 0.180779,2] msm_mpm_dev_probe(): Cannot get clk resource for XO: -517
142<6>[ 0.185154,2] sps:sps is ready.
143<6>[ 0.187283,2] msm_thermal:vdd_restriction_reg_init Defer regulator vdd-dig probe
144<3>[ 0.187295,2] msm_thermal:probe_vdd_rstr Err regulator init. err:-517. KTM continues.
145<6>[ 0.187311,2] msm-thermal soc:qcom,msm-thermal: probe_vdd_rstr:Failed reading node=/soc/qcom,msm-thermal, key=qcom,max-freq-level. err=-517. KTM continues
146<3>[ 0.187324,2] msm_thermal:msm_thermal_dev_probe Failed reading node=/soc/qcom,msm-thermal, key=qcom,online-hotplug-core. err:-517
147<6>[ 0.190690,2] cpu-clock-8939 b011050.qcom,cpu-clock-8939: No PVS version available. Defaulting to 0!
148<6>[ 0.190704,2] cpu-clock-8939 b011050.qcom,cpu-clock-8939: Speed bin: 0 PVS Version: 0
149<3>[ 0.194202,2] smd_channel_probe_now: allocation table not initialized
150<3>[ 0.195543,2] smd_channel_probe_now: allocation table not initialized
151<3>[ 0.196631,2] smd_channel_probe_now: allocation table not initialized
152<4>[ 0.198088,2] msm_rpm_glink_dt_parse: qcom,rpm-glink compatible not matches
153<6>[ 0.198100,2] msm_rpm_dev_probe: APSS-RPM communication over SMD
154<6>[ 0.198854,2] pm8937_s1: 1000 <--> 1225 mV at 1000 mV normal idle
155<6>[ 0.199729,2] pm8937_s2_level: 0 <--> 0 mV at 0 mV normal idle
156<6>[ 0.200360,2] pm8937_s2_floor_level: 0 <--> 0 mV at 0 mV normal idle
157<6>[ 0.200982,2] pm8937_s2_level_ao: 0 <--> 0 mV at 0 mV normal idle
158<6>[ 0.201796,2] pm8937_s3: 1300 mV normal idle
159<6>[ 0.202638,2] pm8937_s4: 2050 mV normal idle
160<6>[ 0.203464,2] pm8937_l2: 1200 mV normal idle
161<6>[ 0.204311,2] pm8937_l3_level_ao: 0 <--> 0 mV at 0 mV normal idle
162<6>[ 0.204908,2] pm8937_l3_level_so: 0 <--> 0 mV at 0 mV normal idle
163<6>[ 0.205737,2] pm8937_l5: 1800 mV normal idle
164<6>[ 0.206768,2] pm8937_l6: 1800 mV normal idle
165<6>[ 0.207611,2] pm8937_l7: 1800 mV normal idle
166<6>[ 0.208202,2] pm8937_l7_ao: 1800 mV normal idle
167<6>[ 0.209044,2] pm8937_l8: 2850 <--> 2900 mV at 2900 mV normal idle
168<6>[ 0.209859,2] pm8937_l9: 3000 <--> 3300 mV at 3000 mV normal idle
169<6>[ 0.210730,2] pm8937_l10: 2800 <--> 3000 mV at 2800 mV normal idle
170<6>[ 0.211547,2] pm8937_l11: 2950 mV normal idle
171<6>[ 0.212392,2] pm8937_l12: 1800 <--> 2950 mV at 1800 mV normal idle
172<6>[ 0.213202,2] pm8937_l13: 3075 mV normal idle
173<6>[ 0.214067,2] pm8937_l14: 1800 <--> 3300 mV at 1800 mV normal idle
174<6>[ 0.214875,2] pm8937_l15: 1800 <--> 3300 mV at 1800 mV normal idle
175<6>[ 0.215715,2] pm8937_l16: 1800 mV normal idle
176<6>[ 0.216532,2] pm8937_l17: 2800 <--> 2900 mV at 2800 mV normal idle
177<6>[ 0.217397,2] pm8937_l19: 1225 <--> 1350 mV at 1225 mV normal idle
178<6>[ 0.218200,2] pm8937_l22: 2800 mV normal idle
179<6>[ 0.219035,2] pm8937_l23: 1200 mV normal idle
180<6>[ 0.219837,2] pm8937_l18: 2700 mV normal idle
181<6>[ 0.222371,2] msm_watchdog b017000.qcom,wdt: wdog absent resource not present
182<6>[ 0.222804,1] msm_watchdog b017000.qcom,wdt: MSM Watchdog Initialized
183<6>[ 0.228603,1] platform soc:qcom,adsprpc-mem: assigned reserved memory node adsp_region@0
184<3>[ 0.232341,1] spmi_pmic_arb 200f000.qcom,spmi: PMIC Arb Version-2 0x20010000
185<6>[ 0.233932,1] pm8937_s5: 1050 <--> 1350 mV at 1225 mV normal idle
186<6>[ 0.234149,1] spm_regulator_probe: name=pm8937_s5, range=LV, voltage=1225000 uV, mode=AUTO, step rate=1200 uV/us
187<6>[ 0.243135,1] platform 4080000.qcom,mss: assigned reserved memory node modem_region@0
188<6>[ 0.243877,1] platform c200000.qcom,lpass: assigned reserved memory node adsp_fw_region@0
189<6>[ 0.244383,1] platform a21b000.qcom,pronto: assigned reserved memory node wcnss_fw_region@0
190<6>[ 0.244705,1] platform 1de0000.qcom,venus: assigned reserved memory node venus_region@0
191<6>[ 0.245611,1] mem_acc_corner: 0 <--> 0 mV at 0 mV
192<6>[ 0.246457,1] cpr_efuse_init: apc_corner: efuse_addr = 0x00000000000a4000 (len=0x1000)
193<6>[ 0.246494,1] cpr_read_fuse_revision: apc_corner: fuse revision = 3
194<6>[ 0.246511,1] cpr_parse_speed_bin_fuse: apc_corner: [row: 37]: 0x3850d121388d4727, speed_bits = 0
195<6>[ 0.246613,1] cpr_pvs_init: apc_corner: pvs voltage: [1105000 1155000 1270000] uV
196<6>[ 0.246625,1] cpr_pvs_init: apc_corner: ceiling voltage: [1155000 1225000 1350000] uV
197<6>[ 0.246636,1] cpr_pvs_init: apc_corner: floor voltage: [1050000 1050000 1090000] uV
198<6>[ 0.246862,1] cpr_init_cpr_parameters: apc_corner: up threshold = 2, down threshold = 4
199<6>[ 0.246890,1] cpr_init_cpr_parameters: apc_corner: CPR is enabled by default.
200<6>[ 0.246921,1] cpr_init_cpr_efuse: apc_corner: [row:67] = 0x248d9253b39d1a28
201<6>[ 0.246943,1] cpr_init_cpr_efuse: apc_corner: Corner[1]: ro_sel = 2, target quot = 868
202<6>[ 0.246955,1] cpr_init_cpr_efuse: apc_corner: Corner[2]: ro_sel = 2, target quot = 947
203<6>[ 0.246967,1] cpr_init_cpr_efuse: apc_corner: Corner[3]: ro_sel = 2, target quot = 1128
204<6>[ 0.247003,1] cpr_adjust_target_quots: apc_corner: Corner[3]: adjusted target quot = 1148
205<6>[ 0.247090,1] cpr_get_corner_quot_adjustment: apc_corner: fuse corner 2 quotient adjustment scaling factor: 0.589
206<6>[ 0.247101,1] cpr_get_corner_quot_adjustment: apc_corner: fuse corner 3 quotient adjustment scaling factor: 0.654
207<6>[ 0.247122,1] cpr_virtual_corner_quot_adjust: apc_corner: corner=1 adjusted quotient=968
208<6>[ 0.247136,1] cpr_virtual_corner_quot_adjust: apc_corner: corner=2 adjusted quotient=1047
209<6>[ 0.247150,1] cpr_virtual_corner_quot_adjust: apc_corner: corner=3 adjusted quotient=1123
210<6>[ 0.247164,1] cpr_virtual_corner_quot_adjust: apc_corner: corner=4 adjusted quotient=1148
211<6>[ 0.247178,1] cpr_virtual_corner_quot_adjust: apc_corner: corner=5 adjusted quotient=1211
212<6>[ 0.247192,1] cpr_virtual_corner_quot_adjust: apc_corner: corner=6 adjusted quotient=1298
213<6>[ 0.247206,1] cpr_virtual_corner_quot_adjust: apc_corner: corner=7 adjusted quotient=1248
214<6>[ 0.247215,1] cpr_get_corner_quot_adjustment: apc_corner: adjusted quotient[1] = 968
215<6>[ 0.247225,1] cpr_get_corner_quot_adjustment: apc_corner: adjusted quotient[2] = 1047
216<6>[ 0.247234,1] cpr_get_corner_quot_adjustment: apc_corner: adjusted quotient[3] = 1123
217<6>[ 0.247243,1] cpr_get_corner_quot_adjustment: apc_corner: adjusted quotient[4] = 1148
218<6>[ 0.247252,1] cpr_get_corner_quot_adjustment: apc_corner: adjusted quotient[5] = 1211
219<6>[ 0.247262,1] cpr_get_corner_quot_adjustment: apc_corner: adjusted quotient[6] = 1298
220<6>[ 0.247271,1] cpr_get_corner_quot_adjustment: apc_corner: adjusted quotient[7] = 1248
221<6>[ 0.247302,1] cpr_virtual_corner_voltage_adjust: apc_corner: corner=1 adjusted open-loop voltage=1155000
222<6>[ 0.247316,1] cpr_virtual_corner_voltage_adjust: apc_corner: corner=2 adjusted open-loop voltage=1205000
223<6>[ 0.247330,1] cpr_virtual_corner_voltage_adjust: apc_corner: corner=3 adjusted open-loop voltage=1250000
224<6>[ 0.247344,1] cpr_virtual_corner_voltage_adjust: apc_corner: corner=4 adjusted open-loop voltage=1265000
225<6>[ 0.247357,1] cpr_virtual_corner_voltage_adjust: apc_corner: corner=5 adjusted open-loop voltage=1300000
226<6>[ 0.247371,1] cpr_virtual_corner_voltage_adjust: apc_corner: corner=6 adjusted open-loop voltage=1345000
227<6>[ 0.247385,1] cpr_virtual_corner_voltage_adjust: apc_corner: corner=7 adjusted open-loop voltage=1320000
228<6>[ 0.247546,1] cpr_config: apc_corner: Timer count: 0x17700 (for 5000 us)
229<6>[ 0.247961,1] apc_corner: 0 <--> 0 mV
230<6>[ 0.263639,1] persistent_ram: persistent_ram: paddr: 00000000ae000000, vaddr: ffffff80003c0000, buf size = 0x1fff4
231<6>[ 0.263665,1] persistent_ram: persistent_ram: paddr: 00000000ae020000, vaddr: ffffff8001900000, buf size = 0x3fff4
232<6>[ 0.266153,1] persistent_ram: persistent_ram: paddr: 00000000ae060000, vaddr: ffffff80003a0000, buf size = 0x7f4
233<6>[ 0.267582,1] console [pstore-1] enabled
234<6>[ 0.267593,1] pstore: Registered ramoops as persistent store backend
235<6>[ 0.267605,1] ramoops: attached 0x80000@0xae000000, ecc: 0/0
236<3>[ 0.269373,3] msm_mpm_dev_probe(): Cannot get clk resource for XO: -517
237<6>[ 0.270473,3] msm_thermal:sensor_mgr_init_threshold threshold id already initialized
238<6>[ 0.270975,3] msm_thermal:vdd_restriction_reg_init Defer vdd rstr freq init.
239<6>[ 0.273608,3] qcom,gcc-8952 1800000.qcom,gcc: GPU speed bin: 0
240<6>[ 0.302581,1] qcom,gcc-spm-8952 b111200.qcom,spm: Registered GCC SPM clocks
241<6>[ 0.302616,1] qcom,gcc-8952 1800000.qcom,gcc: Registered GCC clocks
242<6>[ 0.302749,1] cpu-clock-8939 b011050.qcom,cpu-clock-8939: No PVS version available. Defaulting to 0!
243<6>[ 0.302765,1] cpu-clock-8939 b011050.qcom,cpu-clock-8939: Speed bin: 0 PVS Version: 0
244<6>[ 0.306569,1] populate_opp_table: clock-cpu-8939: OPP tables populated (cpu 7 and 3)
245<6>[ 0.306582,1] print_opp_table: clock_cpu: a53_c0: OPP voltage for 768000000: 1155000
246<6>[ 0.306597,1] print_opp_table: clock_cpu: a53_c0: OPP voltage for 1094400000: 1345000
247<6>[ 0.306609,1] print_opp_table: clock_cpu: a53_c1: OPP voltage for 960000000: 1155000
248<6>[ 0.306620,1] print_opp_table: clock_cpu: a53_c1: OPP voltage for 1401000000: 1345000
249<6>[ 0.308127,2] i2c-msm-v2 78b6000.i2c: probing driver i2c-msm-v2
250<3>[ 0.308356,2] AXI: msm_bus_scale_register_client(): msm_bus_scale_register_client: Bus driver not ready.
251<6>[ 0.308371,2] i2c-msm-v2 78b6000.i2c: msm_bus_scale_register_client(mstr-id:86):0 (not a problem)
252<6>[ 0.309568,1] i2c-msm-v2 78b7000.i2c: probing driver i2c-msm-v2
253<3>[ 0.309789,1] AXI: msm_bus_scale_register_client(): msm_bus_scale_register_client: Bus driver not ready.
254<6>[ 0.309803,1] i2c-msm-v2 78b7000.i2c: msm_bus_scale_register_client(mstr-id:86):0 (not a problem)
255<3>[ 0.363431,6] qcom,qpnp-pin qpnp-pin-15: qpnp_pin_probe: no device nodes specified in topology
256<4>[ 0.363487,6] qcom,qpnp-pin: probe of qpnp-pin-15 failed with error -22
257<3>[ 0.364642,6] msm_cpuss_dump soc:cpuss_dump: Couldn't get memory for dumping
258<3>[ 0.364681,6] msm_cpuss_dump soc:cpuss_dump: Couldn't get memory for dumping
259<6>[ 0.371158,6] KPI: Bootloader start count = 67931
260<6>[ 0.371185,6] KPI: Bootloader end count = 821240
261<6>[ 0.371205,6] KPI: Bootloader display count = 750882002
262<6>[ 0.371225,6] KPI: Bootloader load kernel count = 209977392
263<6>[ 0.371244,6] KPI: Kernel MPM timestamp = 842675
264<6>[ 0.371262,6] KPI: Kernel MPM Clock frequency = 32768
265<6>[ 0.371315,6] socinfo_print: v0.10, id=294, ver=1.0, raw_id=79, raw_ver=0, hw_plat=8, hw_plat_ver=65536
266<6>[ 0.371315,6] accessory_chip=0, hw_plat_subtype=0, pmic_model=65561, pmic_die_revision=65536 foundry_id=2 serial_number=948782887
267<3>[ 0.373246,6] qpnp_pin_of_gpio_xlate: no such PMIC gpio 7 in device topology
268<6>[ 0.373619,6] eldo2_pm8937: no parameters
269<3>[ 0.374177,6] qpnp_pin_of_gpio_xlate: no such PMIC gpio 8 in device topology
270<6>[ 0.374470,6] adv_vreg: no parameters
271<6>[ 0.375382,6] vdda_touch: no parameters
272<6>[ 0.376233,6] vgaarb: loaded
273<5>[ 0.378488,6] SCSI subsystem initialized
274<6>[ 0.380466,6] usbcore: registered new interface driver usbfs
275<6>[ 0.380654,6] usbcore: registered new interface driver hub
276<6>[ 0.381081,6] usbcore: registered new device driver usb
277<6>[ 0.382645,6] media: Linux media interface: v0.10
278<6>[ 0.382792,6] Linux video capture interface: v2.00
279<6>[ 0.382974,6] EDAC MC: Ver: 3.0.0
280<6>[ 0.403539,6] cpufreq: driver msm up and running
281<6>[ 0.404222,6] platform soc:qcom,ion:qcom,ion-heap@8: assigned reserved memory node secure_region@0
282<6>[ 0.404536,6] platform soc:qcom,ion:qcom,ion-heap@27: assigned reserved memory node qseecom_region@0
283<6>[ 0.404887,6] ION heap system created
284<6>[ 0.405086,6] ION heap mm created at 0x00000000d9000000 with size 7000000
285<6>[ 0.405107,6] ION heap qsecom created at 0x00000000d8000000 with size 1000000
286<3>[ 0.405774,6] msm_bus_fabric_init_driver
287<4>[ 0.407255,6] msm_bus_device 580000.ad-hoc-bus: Coresight support absent for bus: 2048
288<6>[ 0.421675,1] qcom,qpnp-power-on qpnp-power-on-4: PMIC@SID0 Power-on reason: Triggered from PON1 (secondary PMIC) and 'cold' boot
289<6>[ 0.421699,1] qcom,qpnp-power-on qpnp-power-on-4: PMIC@SID0: Power-off reason: Triggered from PS_HOLD (PS_HOLD/MSM controlled shutdown)
290<6>[ 0.421900,1] input: qpnp_pon as /devices/virtual/input/input0
291<6>[ 0.422321,1] pon_spare_reg: no parameters
292<6>[ 0.422435,1] qcom,qpnp-power-on qpnp-power-on-13: No PON config. specified
293<6>[ 0.422487,1] qcom,qpnp-power-on qpnp-power-on-13: PMIC@SID2 Power-on reason: Triggered from PON1 (secondary PMIC) and 'cold' boot
294<6>[ 0.422506,1] qcom,qpnp-power-on qpnp-power-on-13: PMIC@SID2: Power-off reason: Triggered from PS_HOLD (PS_HOLD/MSM controlled shutdown)
295<6>[ 0.422694,1] PMIC@SID0: PM8937 v1.0 options: 0, 2, 0, 0
296<6>[ 0.422801,1] PMIC@SID2: PMI8950 v2.0 options: 0, 0, 0, 0
297<6>[ 0.424096,1] gdsc_venus: no parameters
298<6>[ 0.424461,1] gdsc_mdss: no parameters
299<6>[ 0.424791,1] gdsc_jpeg: no parameters
300<6>[ 0.425377,1] gdsc_vfe: no parameters
301<6>[ 0.425932,1] gdsc_vfe1: no parameters
302<6>[ 0.426280,1] gdsc_cpp: no parameters
303<6>[ 0.426545,1] gdsc_oxili_gx: no parameters
304<6>[ 0.426845,1] gdsc_venus_core0: fast normal
305<6>[ 0.427108,1] gdsc_oxili_cx: no parameters
306<6>[ 0.428277,1] mdss_pll_probe: MDSS pll label = MDSS DSI 0 PLL
307<6>[ 0.428288,1] mdss_pll_probe: mdss_pll_probe: label=MDSS DSI 0 PLL PLL SSC enabled
308<6>[ 0.429020,1] dsi_pll_clock_register_lpm: Registered DSI PLL:0 clocks successfully
309<6>[ 0.429054,1] mdss_pll_probe: MDSS pll label = MDSS DSI 1 PLL
310<6>[ 0.429063,1] mdss_pll_probe: mdss_pll_probe: label=MDSS DSI 1 PLL PLL SSC enabled
311<6>[ 0.430905,1] dsi_pll_clock_register_lpm: Registered DSI PLL:1 clocks successfully
312<6>[ 0.431269,1] msm_iommu 1e00000.qcom,iommu: device apps_iommu (model: 500) mapped at ffffff8001c00000, with 21 ctx banks
313<6>[ 0.438882,0] msm_iommu_ctx 1e20000.qcom,iommu-ctx: context q6 using bank 0
314<6>[ 0.439095,2] msm_iommu_ctx 1e21000.qcom,iommu-ctx: context adsp_sec_pixel using bank 1
315<6>[ 0.439306,2] msm_iommu_ctx 1e22000.qcom,iommu-ctx: context mdp_1 using bank 2
316<6>[ 0.439513,2] msm_iommu_ctx 1e23000.qcom,iommu-ctx: context venus_fw using bank 3
317<6>[ 0.439719,2] msm_iommu_ctx 1e24000.qcom,iommu-ctx: context venus_sec_non_pixel using bank 4
318<6>[ 0.439919,2] msm_iommu_ctx 1e25000.qcom,iommu-ctx: context venus_sec_bitstream using bank 5
319<6>[ 0.440140,2] msm_iommu_ctx 1e26000.qcom,iommu-ctx: context venus_sec_pixel using bank 6
320<6>[ 0.440384,2] msm_iommu_ctx 1e28000.qcom,iommu-ctx: context pronto_pil using bank 8
321<6>[ 0.440619,2] msm_iommu_ctx 1e29000.qcom,iommu-ctx: context mss_nav using bank 9
322<6>[ 0.440852,2] msm_iommu_ctx 1e2a000.qcom,iommu-ctx: context periph_rpm using bank 10
323<6>[ 0.441085,2] msm_iommu_ctx 1e2b000.qcom,iommu-ctx: context lpass using bank 11
324<6>[ 0.441319,2] msm_iommu_ctx 1e2f000.qcom,iommu-ctx: context adsp_io using bank 15
325<6>[ 0.441554,2] msm_iommu_ctx 1e30000.qcom,iommu-ctx: context adsp_opendsp using bank 16
326<6>[ 0.441796,2] msm_iommu_ctx 1e31000.qcom,iommu-ctx: context adsp_shared using bank 17
327<6>[ 0.442032,2] msm_iommu_ctx 1e32000.qcom,iommu-ctx: context cpp using bank 18
328<6>[ 0.442264,2] msm_iommu_ctx 1e33000.qcom,iommu-ctx: context jpeg_enc0 using bank 19
329<6>[ 0.442504,2] msm_iommu_ctx 1e34000.qcom,iommu-ctx: context vfe using bank 20
330<6>[ 0.442739,2] msm_iommu_ctx 1e35000.qcom,iommu-ctx: context mdp_0 using bank 21
331<6>[ 0.442979,2] msm_iommu_ctx 1e36000.qcom,iommu-ctx: context venus_ns using bank 22
332<6>[ 0.443216,2] msm_iommu_ctx 1e38000.qcom,iommu-ctx: context mss_mcdma using bank 24
333<6>[ 0.443474,2] msm_iommu_ctx 1e37000.qcom,iommu-ctx: context access_control using bank 23
334<3>[ 0.446021,2] /soc/qcom,cam_smmu/msm_cam_smmu_cb1: could not get #iommu-cells for /soc/qcom,iommu@1e00000
335<3>[ 0.446056,2] /soc/qcom,cam_smmu/msm_cam_smmu_cb3: could not get #iommu-cells for /soc/qcom,iommu@1e00000
336<3>[ 0.446084,2] /soc/qcom,cam_smmu/msm_cam_smmu_cb4: could not get #iommu-cells for /soc/qcom,iommu@1e00000
337<6>[ 0.448661,2] Advanced Linux Sound Architecture Driver Initialized.
338<6>[ 0.449678,2] Bluetooth: ffffffc08e903d20
339<6>[ 0.449710,2] NET: Registered protocol family 31
340<6>[ 0.449718,2] Bluetooth: ffffffc08e903d20
341<6>[ 0.449729,2] Bluetooth: ffffffc08e903d00Bluetooth: ffffffc08e903cd0
342<6>[ 0.449771,2] Bluetooth: ffffffc08e903ce0<6>[ 0.450176,2] cfg80211: Calling CRDA to update world regulatory domain
343<6>[ 0.450198,2] cfg80211: World regulatory domain updated:
344<6>[ 0.450205,2] cfg80211: DFS Master region: unset
345<6>[ 0.450211,2] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
346<6>[ 0.450221,2] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
347<6>[ 0.450229,2] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
348<6>[ 0.450237,2] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A, 2000 mBm), (N/A)
349<6>[ 0.450244,2] cfg80211: (5170000 KHz - 5250000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A)
350<6>[ 0.450252,2] cfg80211: (5250000 KHz - 5330000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A)
351<6>[ 0.450260,2] cfg80211: (5490000 KHz - 5710000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A)
352<6>[ 0.450267,2] cfg80211: (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A)
353<6>[ 0.450275,2] cfg80211: (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm), (N/A)
354<6>[ 0.450799,4] ibb_reg: 4600 <--> 6000 mV at 5500 mV
355<6>[ 0.451193,4] lab_reg: 4600 <--> 6000 mV at 5500 mV
356<6>[ 0.452480,1] Switched to clocksource arch_sys_counter
357<6>[ 0.501911,1] bcl_peripheral:bcl_perph_init BCL Initialized
358<6>[ 0.504129,1] NET: Registered protocol family 2
359<6>[ 0.504627,1] TCP established hash table entries: 32768 (order: 6, 262144 bytes)
360<6>[ 0.504855,1] TCP bind hash table entries: 32768 (order: 7, 524288 bytes)
361<6>[ 0.505315,1] TCP: Hash tables configured (established 32768 bind 32768)
362<6>[ 0.505372,1] TCP: reno registered
363<6>[ 0.505383,1] UDP hash table entries: 2048 (order: 4, 65536 bytes)
364<6>[ 0.505454,1] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
365<6>[ 0.505697,1] NET: Registered protocol family 1
366<7>[ 0.505740,1] PCI: CLS 0 bytes, default 128
367<6>[ 0.507835,0] gcc-mdss-8952 soc:qcom,gcc-mdss@1800000: Registered GCC MDSS clocks.
368<6>[ 0.509190,0] Trying to unpack rootfs image as initramfs...
369<6>[ 2.421518,0] Freeing initrd memory: 4536K (ffffffc003600000 - ffffffc003a6e000)
370<6>[ 2.424915,1] futex hash table entries: 2048 (order: 6, 262144 bytes)
371<6>[ 2.425051,1] audit: initializing netlink subsys (disabled)
372<5>[ 2.425104,1] audit: type=2000 audit(2.423:1): initialized
373<4>[ 2.425593,1] vmscan: error setting kswapd cpu affinity mask
374<5>[ 2.430832,1] VFS: Disk quotas dquot_6.5.2
375<4>[ 2.430955,1] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
376<6>[ 2.432397,1] exFAT: Version 1.2.9
377<6>[ 2.433039,1] Registering esdfs 0.2
378<6>[ 2.433154,1] fuse init (API version 7.23)
379<7>[ 2.433624,1] SELinux: Registering netfilter hooks
380<6>[ 2.436415,1] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 249)
381<6>[ 2.436428,1] io scheduler noop registered
382<6>[ 2.436440,1] io scheduler deadline registered
383<6>[ 2.436629,1] io scheduler cfq registered (default)
384<3>[ 2.441423,1] msm_dss_get_res_byname: 'vbif_nrt_phys' resource not found
385<3>[ 2.441437,1] mdss_mdp_probe+0x210/0x109c->msm_dss_ioremap_byname: 'vbif_nrt_phys' msm_dss_get_res_byname failed
386<3>[ 2.442076,1] mdss_mdp_irq_clk_register: unable to get clk: lut_clk
387<3>[ 2.442857,1] No change in context(0==0), skip
388<6>[ 2.443346,1] mdss_mdp_pipe_addr_setup: type:0 ftchid:-1 xinid:0 num:0 rect:0 ndx:0x1 prio:0
389<6>[ 2.443386,1] mdss_mdp_pipe_addr_setup: type:1 ftchid:-1 xinid:1 num:3 rect:0 ndx:0x8 prio:1
390<6>[ 2.443395,1] mdss_mdp_pipe_addr_setup: type:1 ftchid:-1 xinid:5 num:4 rect:0 ndx:0x10 prio:2
391<6>[ 2.443413,1] mdss_mdp_pipe_addr_setup: type:2 ftchid:-1 xinid:2 num:6 rect:0 ndx:0x40 prio:3
392<6>[ 2.443431,1] mdss_mdp_pipe_addr_setup: type:3 ftchid:-1 xinid:7 num:10 rect:0 ndx:0x400 prio:0
393<3>[ 2.443445,1] mdss_mdp_parse_dt_handler: Error from prop qcom,mdss-pipe-sw-reset-off : u32 array read
394<3>[ 2.443552,1] mdss_mdp_parse_dt_handler: Error from prop qcom,mdss-ib-factor-overlap : u32 array read
395<6>[ 2.443911,1] xlog_status: enable:0, panic:1, dump:2
396<6>[ 2.444677,1] mdss_mdp_probe: mdss version = 0x100e0000, bootloader display is on, num 1, intf_sel=0x00000100
397<3>[ 2.446931,1] mdss_smmu_util_parse_dt_clock: clocks are not defined
398<6>[ 2.446996,1] mdss_smmu_probe: iommu v2 domain[0] mapping and clk register successful!
399<3>[ 2.447028,1] mdss_smmu_util_parse_dt_clock: clocks are not defined
400<6>[ 2.447071,1] mdss_smmu_probe: iommu v2 domain[2] mapping and clk register successful!
401<6>[ 2.449499,1] mdss_dsi_ctrl_probe: DSI Ctrl name = MDSS DSI CTRL->0
402<6>[ 2.450102,1] mdss_panel_parse_panel_config_dt: BL: panel=mipi_mot_video_tianma_1080p_497, manufacture_id(0xDA)= 0x1A controller_ver(0xDB)= 0xD0 controller_drv_ver(0XDC)= 0xC4, full=0x0000000000C4D01A
403<6>[ 2.450114,1] mdss_dsi_find_panel_of_node: cmdline:0:qcom,mdss_dsi_mot_tianma_497_1080p_video_v0 panel_name:qcom,mdss_dsi_mot_tianma_497_1080p_video_v0
404<6>[ 2.450190,1] mdss_dsi_panel_init: Panel Name = mipi_mot_vid_tianma_1080p_497
405<6>[ 2.450347,1] mdss_dsi_panel_timing_from_dt: found new timing "qcom,mdss_dsi_mot_tianma_497_1080p_video_v0" (ffffffc08e903350)
406<3>[ 2.450368,1] mdss_dsi_parse_dcs_cmds: failed, key=qcom,mdss-dsi-post-panel-on-command
407<3>[ 2.450378,1] mdss_dsi_parse_dcs_cmds: failed, key=qcom,mdss-dsi-timing-switch-command
408<4>[ 2.450385,1] mdss_dsi_panel_get_dsc_cfg_np: cannot find dsc config node:
409<6>[ 2.450502,1] mdss_dsi_parse_panel_features: ulps feature disabled
410<6>[ 2.450512,1] mdss_dsi_parse_panel_features: ulps during suspend feature disabled
411<6>[ 2.450521,1] mdss_dsi_parse_dms_config: dynamic switch feature enabled: 0
412<6>[ 2.450639,1] mdss_panel_parse_param_prop: HBM feature enabled with 2 dt cmds
413<6>[ 2.450645,1] mdss_panel_parse_param_prop: HBM type = 1
414<6>[ 2.450685,1] mdss_panel_parse_param_prop: CABC feature enabled with 3 dt cmds
415<3>[ 2.450696,1] mdss_dsi_parse_dcs_cmds: failed, key=qcom,mdss-dsi-lp-mode-on
416<3>[ 2.450706,1] mdss_dsi_parse_dcs_cmds: failed, key=qcom,mdss-dsi-lp-mode-off
417<3>[ 2.450999,1] mdss_dsi_parse_gpio_params:3984, TE gpio not specified
418<6>[ 2.451007,1] mdss_dsi_parse_gpio_params: bklt_en gpio not specified
419<6>[ 2.451054,1] mdss_dsi_retrieve_ctrl_resources: phy_regulator_base=ffffff8001632b80 phy_regulator_size=30
420<6>[ 2.451062,1] mdss_dsi_retrieve_ctrl_resources: ctrl_base=ffffff8000dde000 ctrl_size=300 phy_base=ffffff8001602400 phy_size=280
421<6>[ 2.451178,1] dsi_panel_device_register: Continuous splash enabled
422<6>[ 2.451524,1] mdss_register_panel: adding framebuffer device 1a94000.qcom,mdss_dsi_ctrl0
423<6>[ 2.472860,1] mdss_dsi_ctrl_probe: Dsi Ctrl->0 initialized, DSI rev:0x10040002, PHY rev:0x1
424<6>[ 2.473129,1] mdss_dsi_ctrl_probe: DSI Ctrl name = MDSS DSI CTRL->1
425<3>[ 2.473141,1] mdss_dsi_pinctrl_init: failed to get pinctrl
426<4>[ 2.473147,1] mdss_dsi_ctrl_probe: failed to get pin resources
427<3>[ 2.473648,1] mdss_dsi_find_panel_of_node: controller 1: is not present in 0:qcom,mdss_dsi_mot_tianma_497_1080p_video_v0
428<3>[ 2.473657,1] mdss_dsi_pref_prim_panel:can't find panel phandle
429<3>[ 2.473663,1] mdss_dsi_config_panel: can't find panel node 0:qcom,mdss_dsi_mot_tianma_497_1080p_video_v0
430<3>[ 2.473669,1] mdss_dsi_ctrl_probe: panel configuration failed
431<4>[ 2.473687,1] mdss_dsi_ctrl: probe of 1a96000.qcom,mdss_dsi_ctrl1 failed with error -22
432<6>[ 2.473786,1] mdss_dsi_status_init: DSI status check interval:8000
433<6>[ 2.474704,1] mdss_fb_probe: fb0: split_mode:0 left:0 right:0
434<6>[ 2.475525,1] mdss_fb_register: FrameBuffer[0] 1080x1920 registered successfully!
435<6>[ 2.475964,1] anx7805 anx7805_init: anx7805_init
436<6>[ 2.476006,4] anx7805 anx7805_init_async: anx7805_init_async
437<3>[ 2.479269,1] IPC_RTR: msm_ipc_router_smd_driver_register Already driver registered IPCRTR
438<3>[ 2.479307,1] IPC_RTR: msm_ipc_router_smd_driver_register Already driver registered IPCRTR
439<6>[ 2.483960,0] In memshare_probe, Memshare probe success
440<5>[ 2.486214,0] msm_rpm_log_probe: OK
441<6>[ 2.489992,0] subsys-pil-tz 1de0000.qcom,venus: for venus segments only will be dumped.
442<6>[ 2.492654,0] mmi_unit_info (SMEM) for modem: version = 0x03, device = 'cedric', radio = 0x0, radio_str = 'India', system_rev = 0x8500, system_serial = 0x27478d3800000000, machine = '', barcode = 'ZY3223M78H', baseband = '', carrier = 'amzin', pu_reason = 0x00000100
443<3>[ 2.492692,0] ACPU Bin is not available.
444<6>[ 2.492755,0] mmi_storage_info :eMMC: 16GB SAMSUNG RE1BMB FV=000000000000000D
445<6>[ 2.493488,0] msm_serial_hs module loaded
446<6>[ 2.513299,1] brd: module loaded
447<6>[ 2.515560,1] loop: module loaded
448<6>[ 2.515956,1] zram: Added device: zram0
449<6>[ 2.516515,1] QSEECOM: qseecom_probe: qseecom.qsee_version = 0x1000000
450<4>[ 2.516549,1] QSEECOM: qseecom_retrieve_ce_data: Device does not support PFE
451<6>[ 2.516559,1] QSEECOM: qseecom_probe: qseecom clocks handled by other subsystem
452<4>[ 2.516567,1] QSEECOM: qseecom_probe: qsee reentrancy support phase is not defined, setting to default 0
453<4>[ 2.517251,1] QSEECOM: qseecom_probe: qseecom.whitelist_support = 1
454<6>[ 2.519846,1] alsa-to-h2w soc:alsa_to_h2w: alsa_to_h2w_probe success
455<4>[ 2.520752,1] i2c-core: driver [tabla-i2c-core] using legacy suspend method
456<4>[ 2.520759,1] i2c-core: driver [tabla-i2c-core] using legacy resume method
457<4>[ 2.520853,1] i2c-core: driver [wcd9xxx-i2c-core] using legacy suspend method
458<4>[ 2.520860,1] i2c-core: driver [wcd9xxx-i2c-core] using legacy resume method
459<4>[ 2.520955,1] i2c-core: driver [tasha-i2c-core] using legacy suspend method
460<4>[ 2.520962,1] i2c-core: driver [tasha-i2c-core] using legacy resume method
461<6>[ 2.521352,1] Loading pn544 driver
462<6>[ 2.521679,1] QCE50: __qce_get_device_tree_data: BAM Apps EE is not defined, setting to default 1
463<6>[ 2.522394,1] qce 720000.qcedev: Qualcomm Crypto 5.3.3 device found @0x720000
464<6>[ 2.522406,1] qce 720000.qcedev: CE device = 0x0
465<6>[ 2.522406,1] , IO base, CE = 0xffffff8002540000
466<6>[ 2.522406,1] , Consumer (IN) PIPE 2, Producer (OUT) PIPE 3
467<6>[ 2.522406,1] IO base BAM = 0x (null)
468<6>[ 2.522406,1] BAM IRQ 178
469<6>[ 2.522406,1] Engines Availability = 0x2010853
470<6>[ 2.522661,1] sps:BAM 0x0000000000704000 is registered.
471<6>[ 2.522887,1] sps:BAM 0x0000000000704000 (va:0xffffff8002640000) enabled: ver:0x27, number of pipes:8
472<6>[ 2.523148,1] QCE50: qce_sps_init: Qualcomm MSM CE-BAM at 0x0000000000704000 irq 178
473<6>[ 2.526055,1] QCE50: __qce_get_device_tree_data: BAM Apps EE is not defined, setting to default 1
474<6>[ 2.527144,1] qcrypto 720000.qcrypto: Qualcomm Crypto 5.3.3 device found @0x720000
475<6>[ 2.527157,1] qcrypto 720000.qcrypto: CE device = 0x0
476<6>[ 2.527157,1] , IO base, CE = 0xffffff8002680000
477<6>[ 2.527157,1] , Consumer (IN) PIPE 4, Producer (OUT) PIPE 5
478<6>[ 2.527157,1] IO base BAM = 0x (null)
479<6>[ 2.527157,1] BAM IRQ 178
480<6>[ 2.527157,1] Engines Availability = 0x2010853
481<6>[ 2.527498,1] QCE50: qce_sps_init: Qualcomm MSM CE-BAM at 0x0000000000704000 irq 178
482<6>[ 2.529641,1] qcrypto 720000.qcrypto: qcrypto-ecb-aes
483<6>[ 2.529757,1] qcrypto 720000.qcrypto: qcrypto-cbc-aes
484<6>[ 2.529871,1] qcrypto 720000.qcrypto: qcrypto-ctr-aes
485<6>[ 2.529985,1] qcrypto 720000.qcrypto: qcrypto-ecb-des
486<6>[ 2.530117,1] qcrypto 720000.qcrypto: qcrypto-cbc-des
487<6>[ 2.530229,1] qcrypto 720000.qcrypto: qcrypto-ecb-3des
488<6>[ 2.530340,1] qcrypto 720000.qcrypto: qcrypto-cbc-3des
489<6>[ 2.530454,1] qcrypto 720000.qcrypto: qcrypto-xts-aes
490<6>[ 2.530565,1] qcrypto 720000.qcrypto: qcrypto-sha1
491<6>[ 2.530675,1] qcrypto 720000.qcrypto: qcrypto-sha256
492<6>[ 2.530786,1] qcrypto 720000.qcrypto: qcrypto-aead-hmac-sha1-cbc-aes
493<6>[ 2.530898,1] qcrypto 720000.qcrypto: qcrypto-aead-hmac-sha1-cbc-des
494<6>[ 2.531009,1] qcrypto 720000.qcrypto: qcrypto-aead-hmac-sha1-cbc-3des
495<6>[ 2.531123,1] qcrypto 720000.qcrypto: qcrypto-aead-hmac-sha256-cbc-aes
496<6>[ 2.531241,1] qcrypto 720000.qcrypto: qcrypto-aead-hmac-sha256-cbc-des
497<6>[ 2.531351,1] qcrypto 720000.qcrypto: qcrypto-aead-hmac-sha256-cbc-3des
498<6>[ 2.531466,1] qcrypto 720000.qcrypto: qcrypto-hmac-sha1
499<6>[ 2.531577,1] qcrypto 720000.qcrypto: qcrypto-hmac-sha256
500<6>[ 2.531688,1] qcrypto 720000.qcrypto: qcrypto-aes-ccm
501<6>[ 2.531801,1] qcrypto 720000.qcrypto: qcrypto-rfc4309-aes-ccm
502<3>[ 2.532894,1] qcom_ice_get_device_tree_data: No vdd-hba-supply regulator, assuming not needed
503<6>[ 2.533048,1] ICE IRQ = 180
504<6>[ 2.534133,1] SCSI Media Changer driver v0.25
505<3>[ 2.537330,1] sps: BAM device 0x0000000007884000 is not registered yet.
506<6>[ 2.537577,1] sps:BAM 0x0000000007884000 is registered.
507<6>[ 2.538351,1] sps:BAM 0x0000000007884000 (va:0xffffff8001be0000) enabled: ver:0x19, number of pipes:12
508<4>[ 2.539567,1] spi4.0 supply sensor3 not found, using dummy regulator
509<6>[ 2.540934,1] input: sensorprocessor as /devices/virtual/input/input1
510<6>[ 2.540962,1] stml0xx spi4.0: stml0xx_akm_init
511<3>[ 2.542660,1] spi_qsd 7af6000.spi: init_resources: unable to get core_clk
512<6>[ 2.543498,1] tun: Universal TUN/TAP device driver, 1.6
513<6>[ 2.543504,1] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
514<6>[ 2.546457,1] PPP generic driver version 2.4.2
515<6>[ 2.546563,1] PPP BSD Compression module registered
516<6>[ 2.546574,1] PPP Deflate Compression module registered
517<6>[ 2.546597,1] PPP MPPE Compression module registered
518<6>[ 2.546612,1] NET: Registered protocol family 24
519<6>[ 2.547465,1] wcnss_wlan probed in built-in mode
520<6>[ 2.548262,1] pegasus: v0.9.3 (2013/04/25), Pegasus/Pegasus II USB Ethernet driver
521<6>[ 2.548358,1] usbcore: registered new interface driver pegasus
522<6>[ 2.548416,1] usbcore: registered new interface driver asix
523<6>[ 2.548463,1] usbcore: registered new interface driver ax88179_178a
524<6>[ 2.548514,1] usbcore: registered new interface driver cdc_ether
525<6>[ 2.548560,1] usbcore: registered new interface driver net1080
526<6>[ 2.548606,1] usbcore: registered new interface driver cdc_subset
527<6>[ 2.548651,1] usbcore: registered new interface driver zaurus
528<6>[ 2.548698,1] usbcore: registered new interface driver MOSCHIP usb-ethernet driver
529<6>[ 2.548908,1] usbcore: registered new interface driver cdc_ncm
530<6>[ 2.549472,1] msm_sharedmem: sharedmem_register_qmi: qmi init successful
531<3>[ 2.550240,0] scm_call failed: func id 0x42000c16, ret: -1, syscall returns: 0x0, 0x0, 0x0
532<6>[ 2.550250,0] hyp_assign_table: Failed to assign memory protection, ret = -5
533<3>[ 2.550260,0] msm_sharedmem: setup_shared_ram_perms: hyp_assign_phys failed IPA=0x0160x00000000d7100000 size=1572864 err=-5
534<6>[ 2.550385,0] msm_sharedmem: msm_sharedmem_probe: Device created for client 'rmtfs'
535<6>[ 2.551199,0] msm_otg 78db000.usb: msm_otg probe
536<6>[ 2.554863,0] msm_otg 78db000.usb: OTG regs = ffffff800189a000
537<6>[ 2.560223,0] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
538<6>[ 2.560236,0] ehci-pci: EHCI PCI platform driver
539<6>[ 2.560284,0] ehci-msm: Qualcomm On-Chip EHCI Host Controller
540<3>[ 2.560774,0] Unable to get vbus_otg
541<3>[ 2.560783,0] msm_hsusb_host msm_hsusb_host: unable to register with transceiver
542<6>[ 2.560882,0] usbcore: registered new interface driver cdc_acm
543<6>[ 2.560889,0] cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters
544<6>[ 2.560952,0] usbcore: registered new interface driver usb-storage
545<6>[ 2.560992,0] usbcore: registered new interface driver ums-alauda
546<6>[ 2.561035,0] usbcore: registered new interface driver ums-cypress
547<6>[ 2.561076,0] usbcore: registered new interface driver ums-datafab
548<6>[ 2.561116,0] usbcore: registered new interface driver ums-freecom
549<6>[ 2.561157,0] usbcore: registered new interface driver ums-isd200
550<6>[ 2.561198,0] usbcore: registered new interface driver ums-jumpshot
551<6>[ 2.561238,0] usbcore: registered new interface driver ums-karma
552<6>[ 2.561279,0] usbcore: registered new interface driver ums-onetouch
553<6>[ 2.561320,0] usbcore: registered new interface driver ums-sddr09
554<6>[ 2.561361,0] usbcore: registered new interface driver ums-sddr55
555<6>[ 2.561404,0] usbcore: registered new interface driver ums-usbat
556<6>[ 2.561510,0] usbcore: registered new interface driver usbserial
557<6>[ 2.561558,0] usbcore: registered new interface driver usb_ehset_test
558<6>[ 2.562380,1] gbridge_init: gbridge_init successs.
559<6>[ 2.563203,1] mousedev: PS/2 mouse device common for all mice
560<6>[ 2.563509,1] usbcore: registered new interface driver xpad
561<3>[ 2.564307,1] synaptics_dsx_dt_parse_modifiers: processing modifier config_modifier-aod[0]
562<6>[ 2.564443,1] synaptics_dsx_i2c 3-0020: no valid patch sets found
563<3>[ 2.564453,1] synaptics_dsx_dt_parse_modifiers: processing modifier config_modifier-fps[5]
564<5>[ 2.564461,1] synaptics_dsx_dt_parse_modifiers: using fingerprint sensor detection
565<5>[ 2.564470,1] synaptics_dsx_dt_parse_modifier: using touch clip area in fps-active
566<5>[ 2.564520,1] synaptics_dsx_of_init: using gpio config
567<4>[ 2.565147,1] 3-0020 supply vdd_quirk not found, using dummy regulator
568<3>[ 2.607648,0] i2c-msm-v2 78b7000.i2c: msm_bus_scale_register_client(mstr-id:86):0xe (ok)
569<3>[ 2.611255,0] synaptics_dsx_i2c 3-0020: synaptics_rmi4_cap_button_map: cap_button_map is NULL in board file
570<6>[ 2.613318,0] synaptics_dsx_i2c 3-0020: F51 ctrl[0]=02
571<6>[ 2.613327,0] synaptics_dsx_i2c 3-0020: F51 ctrl[4]=14
572<5>[ 2.615401,0] synaptics_rmi4_query_device: touch interrupt status and finger data not contiguous
573<6>[ 2.616745,0] input: synaptics_dsx_i2c as /devices/soc/78b7000.i2c/i2c-3/3-0020/input/input2
574<6>[ 2.616829,0] synaptics_rmi4_query_device: Product: s3203b, firmware id: 25d862, config id: 16120901
575<6>[ 2.617721,0] synaptics_dsx_sensor_state: state change UNKNOWN -> STANDBY
576<6>[ 2.617733,0] synaptics_dsx_sysfs_touchscreen: assigned minor 32
577<3>[ 2.617834,0] synaptics_dsx_i2c 3-0020: Failed to register fps_notifier: -19
578<4>[ 2.617842,0] ------------[ cut here ]------------
579<4>[ 2.617856,0] WARNING: CPU: 0 PID: 1 at ../../../../../../kernel/motorola/msm8937/kernel/power/qos.c:626 pm_qos_add_request+0xf8/0x2bc()
580<3>[ 2.617863,0] IRQ-72 not set for request with affinity flag
581<4>[ 2.617868,0] Modules linked in:
582<4>[ 2.617880,0] CPU: 0 PID: 1 Comm: swapper/0 Not tainted 3.18.63-lineage-gb0189e4-dirty #1
583<4>[ 2.617887,0] Hardware name: cedric (DT)
584<0>[ 2.617893,0] Call trace:
585<4>[ 2.617903,0] [<ffffffc000089af0>] dump_backtrace+0x0/0x23c
586<4>[ 2.617912,0] [<ffffffc000089d40>] show_stack+0x14/0x1c
587<4>[ 2.617923,0] [<ffffffc000e93018>] dump_stack+0x80/0xa4
588<4>[ 2.617932,0] [<ffffffc00009d2c8>] warn_slowpath_common+0x8c/0xb0
589<4>[ 2.617941,0] [<ffffffc00009d33c>] warn_slowpath_fmt+0x50/0x58
590<4>[ 2.617949,0] [<ffffffc0000e0828>] pm_qos_add_request+0xf8/0x2bc
591<4>[ 2.617959,0] [<ffffffc0006fcaf8>] synaptics_rmi4_probe+0xf44/0x10c8
592<4>[ 2.617969,0] [<ffffffc0007391cc>] i2c_device_probe+0xb8/0xec
593<4>[ 2.617980,0] [<ffffffc0005234dc>] driver_probe_device+0xd8/0x224
594<4>[ 2.617988,0] [<ffffffc0005236d8>] __driver_attach+0x64/0x90
595<4>[ 2.617997,0] [<ffffffc000522618>] bus_for_each_dev+0x74/0x90
596<4>[ 2.618005,0] [<ffffffc000522fa4>] driver_attach+0x20/0x28
597<4>[ 2.618013,0] [<ffffffc000522c70>] bus_add_driver+0xfc/0x1cc
598<4>[ 2.618022,0] [<ffffffc00052404c>] driver_register+0x94/0xe0
599<4>[ 2.618031,0] [<ffffffc000738698>] i2c_register_driver+0x4c/0xac
600<4>[ 2.618040,0] [<ffffffc00169afcc>] synaptics_rmi4_init+0x1c/0x24
601<4>[ 2.618047,0] [<ffffffc000082a44>] do_one_initcall+0x18c/0x1a8
602<4>[ 2.618057,0] [<ffffffc00165cb44>] kernel_init_freeable+0x1c0/0x25c
603<4>[ 2.618066,0] [<ffffffc000e8d3ec>] kernel_init+0x14/0xd8
604<4>[ 2.618097,0] ---[ end trace 3947aece1b88c922 ]---
605<6>[ 2.619137,0] input: hbtp_vm as /devices/virtual/input/input3
606<6>[ 2.620557,4] input: fpc1020 as /devices/virtual/input/input4
607<6>[ 2.620667,4] fpc1020 spi6.0: fpc1020_probe: ok
608<6>[ 2.621081,4] input: SX9310 Cap Touch as /devices/virtual/input/input5
609<6>[ 2.621665,1] SX9310registered with threaded irq (38)
610<3>[ 2.621917,1] i2c-msm-v2 78b6000.i2c: msm_bus_scale_register_client(mstr-id:86):0xf (ok)
611<6>[ 3.028276,4] input: qwerty as /devices/virtual/input/input6
612<6>[ 3.028695,3] hb_init hb done
613<6>[ 3.028992,3] qcom,qpnp-rtc qpnp-rtc-7: rtc core: registered qpnp_rtc as rtc0
614<6>[ 3.029179,3] i2c /dev entries driver
615<3>[ 3.034779,3] /soc/qcom,cam_smmu/msm_cam_smmu_cb1: could not get #iommu-cells for /soc/qcom,iommu@1e00000
616<3>[ 3.035335,3] CAM-SMMU cam_populate_smmu_context_banks:1586 Invalid pointer of ctx : vfe_secure rc = -517
617<3>[ 3.035343,3] CAM-SMMU cam_smmu_probe:1636 Error: populating context banks
618<4>[ 3.035359,3] msm_cam_smmu: probe of soc:qcom,cam_smmu:msm_cam_smmu_cb2 failed with error -12
619<3>[ 3.035414,3] /soc/qcom,cam_smmu/msm_cam_smmu_cb3: could not get #iommu-cells for /soc/qcom,iommu@1e00000
620<3>[ 3.035725,3] /soc/qcom,cam_smmu/msm_cam_smmu_cb4: could not get #iommu-cells for /soc/qcom,iommu@1e00000
621<3>[ 3.036147,3] CAM-SMMU cam_populate_smmu_context_banks:1586 Invalid pointer of ctx : vfe_secure rc = -517
622<3>[ 3.036154,3] CAM-SMMU cam_smmu_probe:1636 Error: populating context banks
623<4>[ 3.036166,3] msm_cam_smmu: probe of soc:qcom,cam_smmu:msm_cam_smmu_cb2 failed with error -12
624<3>[ 3.038648,3] msm_camera_get_dt_vreg_data:1115 number of entries is 0 or not present in dts
625<3>[ 3.044364,3] msm_camera_get_dt_vreg_data:1115 number of entries is 0 or not present in dts
626<3>[ 3.045681,3] msm_camera_get_dt_vreg_data:1115 number of entries is 0 or not present in dts
627<3>[ 3.046997,3] msm_camera_get_dt_vreg_data:1115 number of entries is 0 or not present in dts
628<3>[ 3.047680,3] msm_camera_pinctrl_init:1277 Getting pinctrl handle failed
629<3>[ 3.047689,3] msm_actuator_platform_probe:1958 ERR:msm_actuator_platform_probe: Error in reading actuator pinctrl
630<4>[ 3.047781,3] qcom,actuator: probe of 1b0c000.qcom,cci:qcom,actuator@0 failed with error -22
631<3>[ 3.048592,3] msm_eeprom_platform_probe failed 1728
632<3>[ 3.049148,3] msm_eeprom_platform_probe failed 1728
633<3>[ 3.050229,3] msm_flash_get_pmic_source_info:901 alternate current: read failed
634<3>[ 3.050238,3] msm_flash_get_pmic_source_info:921 alternate max-current: read failed
635<3>[ 3.050246,3] msm_flash_get_pmic_source_info:941 alternate duration: read failed
636<3>[ 3.050293,3] msm_flash_get_pmic_source_info:901 alternate current: read failed
637<3>[ 3.050301,3] msm_flash_get_pmic_source_info:921 alternate max-current: read failed
638<3>[ 3.050308,3] msm_flash_get_pmic_source_info:941 alternate duration: read failed
639<3>[ 3.050356,3] msm_flash_get_pmic_source_info:1011 alternate current: read failed
640<3>[ 3.050363,3] msm_flash_get_pmic_source_info:1031 alternate current: read failed
641<3>[ 3.050411,3] msm_flash_get_pmic_source_info:1011 alternate current: read failed
642<3>[ 3.050419,3] msm_flash_get_pmic_source_info:1031 alternate current: read failed
643<3>[ 3.050428,3] msm_camera_get_dt_vreg_data:1115 number of entries is 0 or not present in dts
644<4>[ 3.057563,3] ------------[ cut here ]------------
645<4>[ 3.057579,3] WARNING: CPU: 3 PID: 1 at ../../../../../../kernel/motorola/msm8937/drivers/clk/msm/clock-local2.c:233 rcg_clk_enable+0x50/0xb4()
646<4>[ 3.057586,3] Attempting to prepare camss_top_ahb_clk_src before setting its rate. Set the rate first!
647<4>[ 3.057591,3] Modules linked in:
648<4>[ 3.057604,3] CPU: 3 PID: 1 Comm: swapper/0 Tainted: G W 3.18.63-lineage-gb0189e4-dirty #1
649<4>[ 3.057610,3] Hardware name: cedric (DT)
650<0>[ 3.057616,3] Call trace:
651<4>[ 3.057627,3] [<ffffffc000089af0>] dump_backtrace+0x0/0x23c
652<4>[ 3.057635,3] [<ffffffc000089d40>] show_stack+0x14/0x1c
653<4>[ 3.057645,3] [<ffffffc000e93018>] dump_stack+0x80/0xa4
654<4>[ 3.057655,3] [<ffffffc00009d2c8>] warn_slowpath_common+0x8c/0xb0
655<4>[ 3.057663,3] [<ffffffc00009d33c>] warn_slowpath_fmt+0x50/0x58
656<4>[ 3.057671,3] [<ffffffc000b8d934>] rcg_clk_enable+0x50/0xb4
657<4>[ 3.057678,3] [<ffffffc000b8a2a0>] clk_enable+0x144/0x1bc
658<4>[ 3.057686,3] [<ffffffc000b8a1f8>] clk_enable+0x9c/0x1bc
659<4>[ 3.057697,3] [<ffffffc0007bba04>] msm_camera_clk_enable+0x130/0x1fc
660<4>[ 3.057706,3] [<ffffffc0007dc768>] cpp_init_hardware+0xcc/0x454
661<4>[ 3.057714,3] [<ffffffc0007df84c>] cpp_probe+0x354/0x688
662<4>[ 3.057723,3] [<ffffffc000524f88>] platform_drv_probe+0x38/0x84
663<4>[ 3.057731,3] [<ffffffc0005234dc>] driver_probe_device+0xd8/0x224
664<4>[ 3.057739,3] [<ffffffc0005236d8>] __driver_attach+0x64/0x90
665<4>[ 3.057748,3] [<ffffffc000522618>] bus_for_each_dev+0x74/0x90
666<4>[ 3.057756,3] [<ffffffc000522fa4>] driver_attach+0x20/0x28
667<4>[ 3.057764,3] [<ffffffc000522c70>] bus_add_driver+0xfc/0x1cc
668<4>[ 3.057772,3] [<ffffffc00052404c>] driver_register+0x94/0xe0
669<4>[ 3.057779,3] [<ffffffc000524ed0>] __platform_driver_register+0x60/0x68
670<4>[ 3.057787,3] [<ffffffc00169da2c>] msm_cpp_init_module+0x18/0x20
671<4>[ 3.057795,3] [<ffffffc000082a44>] do_one_initcall+0x18c/0x1a8
672<4>[ 3.057804,3] [<ffffffc00165cb44>] kernel_init_freeable+0x1c0/0x25c
673<4>[ 3.057812,3] [<ffffffc000e8d3ec>] kernel_init+0x14/0xd8
674<4>[ 3.057819,3] ---[ end trace 3947aece1b88c923 ]---
675<6>[ 3.057848,3] MSM-CPP cpp_init_hardware:863 CPP HW Version: 0x40030002
676<3>[ 3.057859,3] MSM-CPP cpp_init_hardware:881 stream_cnt:0
677<3>[ 3.072248,3] __msm_jpeg_init:1537] Jpeg Device id 0
678<6>[ 3.073906,3] usbcore: registered new interface driver uvcvideo
679<6>[ 3.073915,3] USB Video Class driver (1.1.1)
680<3>[ 3.075984,3] FG: fg_power_get_property: ESR Bad: -22 mOhm
681<3>[ 3.076357,3] FG: fg_power_get_property: ESR Bad: -22 mOhm
682<6>[ 3.076431,3] FG: fg_probe: FG Probe success - FG Revision DIG:3.1 ANA:1.2 PMIC subtype=17
683<3>[ 3.077166,0] qpnp-smbcharger qpnp-smbcharger-17: node /soc/qcom,spmi@200f000/qcom,pmi8950@2/qcom,qpnp-smbcharger IO resource absent!
684<3>[ 3.077525,0] qpnp-smbcharger qpnp-smbcharger-17: length=6
685<3>[ 3.077536,0] qpnp-smbcharger qpnp-smbcharger-17: num parallel charge entries=6
686<6>[ 3.077808,0] smbcharger_charger_otg: no parameters
687<6>[ 3.101368,0] qpnp-smbcharger qpnp-smbcharger-17: HW Detected SDP!
688<3>[ 3.101702,0] qpnp-smbcharger qpnp-smbcharger-17: Normal Charger Detected!
689<3>[ 3.105352,1] qpnp-smbcharger qpnp-smbcharger-17: node /soc/qcom,spmi@200f000/qcom,pmi8950@2/qcom,qpnp-smbcharger IO resource absent!
690<6>[ 3.106206,1] qpnp-smbcharger qpnp-smbcharger-17: SMBCHG successfully probe Charger version=SCHG_LITE Revision DIG:0.0 ANA:0.1 batt=1 dc=0 usb=0
691<3>[ 3.108145,1] unable to find DT imem DLOAD mode node
692<3>[ 3.108797,1] unable to find DT imem EDLOAD mode node
693<3>[ 3.112100,1] qpnp-smbcharger qpnp-smbcharger-17: Battery Temp State = Safety timer expire
694<4>[ 3.112386,4] thermal thermal_zone2: failed to read out thermal zone 2
695<4>[ 3.112702,1] thermal thermal_zone3: failed to read out thermal zone 3
696<4>[ 3.112956,1] thermal thermal_zone4: failed to read out thermal zone 4
697<4>[ 3.113199,1] thermal thermal_zone5: failed to read out thermal zone 5
698<3>[ 3.113798,1] qpnp_vadc_read: Error reading die_temp
699<6>[ 3.136592,1] device-mapper: ioctl: 4.28.0-ioctl (2014-09-17) initialised: dm-devel@redhat.com
700<6>[ 3.136738,1] device-mapper: req-crypt: dm-req-crypt successfully initalized.
701<6>[ 3.136738,1]
702<6>[ 3.137687,1] sdhci: Secure Digital Host Controller Interface driver
703<6>[ 3.137694,1] sdhci: Copyright(c) Pierre Ossman
704<6>[ 3.137704,1] sdhci-pltfm: SDHCI platform and OF driver helper
705<6>[ 3.138508,1] qcom_ice_get_pdevice: found ice device ffffffc0b0240800
706<6>[ 3.138515,1] qcom_ice_get_pdevice: matching platform device ffffffc0b0cf7000
707<6>[ 3.142628,1] qcom_ice 7803000.sdcc1ice: QC ICE 2.1.44 device found @0xffffff8001b20000
708<6>[ 3.143033,1] sdhci_msm 7824900.sdhci: No vmmc regulator found
709<6>[ 3.143041,1] sdhci_msm 7824900.sdhci: No vqmmc regulator found
710<6>[ 3.143441,1] mmc0: SDHCI controller on 7824900.sdhci [7824900.sdhci] using 64-bit ADMA in CMDQ mode
711<4>[ 3.177608,4] sdhci_msm 7864900.sdhci: sdhci_msm_probe: ICE device is not enabled
712<6>[ 3.194889,5] sdhci_msm 7864900.sdhci: No vmmc regulator found
713<6>[ 3.194903,5] sdhci_msm 7864900.sdhci: No vqmmc regulator found
714<6>[ 3.195359,5] mmc1: SDHCI controller on 7864900.sdhci [7864900.sdhci] using 64-bit ADMA in legacy mode
715<6>[ 3.212893,4] mmc0: Out-of-interrupt timeout is 50[ms]
716<6>[ 3.212902,4] mmc0: BKOPS_EN equals 0x2
717<6>[ 3.212911,4] mmc0: eMMC FW version: 0x0d
718<6>[ 3.212919,4] mmc0: CMDQ supported: depth: 16
719<6>[ 3.212927,4] mmc0: cache barrier support 0 flush policy 0
720<6>[ 3.220075,4] cmdq_host_alloc_tdl: desc_size: 768 data_sz: 253952 slot-sz: 24
721<6>[ 3.220354,4] desc-base: 0xffffff8001b1d000 trans-base: 0xffffff8002980000
722<6>[ 3.220354,4] desc_dma 0xd6c5a000 trans_dma: 0xd7080000
723<6>[ 3.220377,4] mmc0: CMDQ enabled on card
724<6>[ 3.220392,4] mmc0: new HS400 MMC card at address 0001
725<6>[ 3.221014,0] sdhci_msm_pm_qos_cpu_init (): voted for group #0 (mask=0xf) latency=2 (0xffffffc0af7d0400)
726<6>[ 3.221028,0] sdhci_msm_pm_qos_cpu_init (): voted for group #1 (mask=0xf0) latency=2 (0xffffffc0af7d0408)
727<6>[ 3.221157,4] mmcblk0: mmc0:0001 RE1BMB 14.5 GiB
728<6>[ 3.221314,4] mmcblk0rpmb: mmc0:0001 RE1BMB partition 3 4.00 MiB
729<6>[ 3.223382,4] mmcblk0: p1 p2 p3 p4 p5 p6 p7 p8 p9 p10 p11 p12 p13 p14 p15 p16 p17 p18 p19 p20 p21 p22 p23 p24 p25 p26 p27 p28 p29 p30 p31 p32 p33 p34 p35 p36 p37 p38 p39 p40 p41 p42 p43 p44 p45 p46 p47 p48 p49 p50 p51 p52 p53 p54
730<6>[ 3.232836,6] qcom,leds-atc leds-atc-20: atc_leds_probe success
731<6>[ 3.233514,6] tz_log 8600720.tz-log: Hyp log service is not supported
732<6>[ 3.234944,6] hidraw: raw HID events driver (C) Jiri Kosina
733<6>[ 3.235549,6] usbcore: registered new interface driver usbhid
734<6>[ 3.235558,6] usbhid: USB HID core driver
735<6>[ 3.236152,6] ashmem: initialized
736<6>[ 3.236931,6] qpnp_coincell_charger_show_state: enabled=Y, voltage=3200 mV, resistance=2100 ohm
737<6>[ 3.241273,6] bimc-bwmon 408000.qcom,cpu-bwmon: BW HWmon governor registered.
738<3>[ 3.245407,0] devfreq soc:qcom,cpubw: Couldn't update frequency transition information.
739<3>[ 3.245603,0] devfreq soc:qcom,mincpubw: Couldn't update frequency transition information.
740<6>[ 3.247979,0] coresight-fuse a601c.fuse: Fuse initialized
741<4>[ 3.248436,0] coresight-cti: probe of 6010000.cti failed with error -1
742<4>[ 3.248469,0] coresight-cti: probe of 6011000.cti failed with error -1
743<4>[ 3.248502,0] coresight-cti: probe of 6012000.cti failed with error -1
744<4>[ 3.248547,0] coresight-cti: probe of 6013000.cti failed with error -1
745<4>[ 3.248580,0] coresight-cti: probe of 6014000.cti failed with error -1
746<4>[ 3.248612,0] coresight-cti: probe of 6015000.cti failed with error -1
747<4>[ 3.248644,0] coresight-cti: probe of 6016000.cti failed with error -1
748<4>[ 3.248676,0] coresight-cti: probe of 6017000.cti failed with error -1
749<4>[ 3.248750,0] coresight-cti: probe of 6018000.cti failed with error -1
750<4>[ 3.248783,0] coresight-cti: probe of 6019000.cti failed with error -1
751<4>[ 3.248816,0] coresight-cti: probe of 601a000.cti failed with error -1
752<4>[ 3.248848,0] coresight-cti: probe of 601b000.cti failed with error -1
753<4>[ 3.248880,0] coresight-cti: probe of 601c000.cti failed with error -1
754<4>[ 3.248911,0] coresight-cti: probe of 601d000.cti failed with error -1
755<4>[ 3.248943,0] coresight-cti: probe of 601e000.cti failed with error -1
756<4>[ 3.248974,0] coresight-cti: probe of 601f000.cti failed with error -1
757<4>[ 3.249007,0] coresight-cti: probe of 61b8000.cti failed with error -1
758<4>[ 3.249039,0] coresight-cti: probe of 61b9000.cti failed with error -1
759<4>[ 3.249070,0] coresight-cti: probe of 61ba000.cti failed with error -1
760<4>[ 3.249103,0] coresight-cti: probe of 61bb000.cti failed with error -1
761<4>[ 3.249134,0] coresight-cti: probe of 6198000.cti failed with error -1
762<4>[ 3.249166,0] coresight-cti: probe of 6199000.cti failed with error -1
763<4>[ 3.249211,0] coresight-cti: probe of 619a000.cti failed with error -1
764<4>[ 3.249243,0] coresight-cti: probe of 619b000.cti failed with error -1
765<4>[ 3.249275,0] coresight-cti: probe of 6124000.cti failed with error -1
766<4>[ 3.249307,0] coresight-cti: probe of 6139000.cti failed with error -1
767<4>[ 3.249338,0] coresight-cti: probe of 6134000.cti failed with error -1
768<4>[ 3.249412,0] coresight-cti: probe of 613c000.cti failed with error -1
769<4>[ 3.249445,0] coresight-cti: probe of 610c000.cti failed with error -1
770<6>[ 3.249896,0] coresight-csr 6001000.csr: CSR initialized
771<4>[ 3.250376,0] coresight-tmc: probe of 6028000.tmc failed with error -1
772<3>[ 3.250617,0] coresight-tmc 6027000.tmc: failed to get flush cti
773<3>[ 3.250626,0] coresight-tmc 6027000.tmc: failed to get reset cti
774<6>[ 3.250809,0] coresight-tmc 6027000.tmc: TMC initialized
775<6>[ 3.252534,0] nidnt boot config: 0
776<6>[ 3.252544,0] coresight-tpiu 6020000.tpiu: NIDnT hw support disabled
777<6>[ 3.252552,0] coresight-tpiu 6020000.tpiu: NIDnT on SDCARD only mode
778<6>[ 3.252636,0] coresight-tpiu 6020000.tpiu: TPIU initialized
779<6>[ 3.254596,0] coresight-replicator 6026000.replicator: REPLICATOR initialized
780<4>[ 3.255111,0] coresight-stm: probe of 6002000.stm failed with error -1
781<6>[ 3.255634,0] coresight-hwevent 6101000.hwevent: Hardware Event driver initialized
782<6>[ 3.256633,0] usbcore: registered new interface driver snd-usb-audio
783<6>[ 3.274615,0] msm-pcm-lpa soc:qcom,msm-pcm-lpa: msm_pcm_probe: dev name soc:qcom,msm-pcm-lpa
784<6>[ 3.281037,0] u32 classifier
785<6>[ 3.281045,0] Actions configured
786<6>[ 3.281091,0] Netfilter messages via NETLINK v0.30.
787<6>[ 3.281148,0] nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
788<6>[ 3.281498,0] ctnetlink v0.93: registering with nfnetlink.
789<6>[ 3.282220,0] xt_time: kernel timezone is -0000
790<6>[ 3.282487,0] ip_tables: (C) 2000-2006 Netfilter Core Team
791<6>[ 3.282679,0] arp_tables: (C) 2002 David S. Miller
792<6>[ 3.282734,0] TCP: cubic registered
793<6>[ 3.282745,0] Initializing XFRM netlink socket
794<6>[ 3.283116,0] NET: Registered protocol family 10
795<6>[ 3.284001,1] mip6: Mobile IPv6
796<6>[ 3.284037,1] ip6_tables: (C) 2000-2006 Netfilter Core Team
797<6>[ 3.284209,1] sit: IPv6 over IPv4 tunneling driver
798<6>[ 3.284670,1] NET: Registered protocol family 17
799<6>[ 3.284700,1] NET: Registered protocol family 15
800<6>[ 3.284743,1] bridge: automatic filtering via arp/ip/ip6tables has been deprecated. Update your scripts to load br_netfilter if you need this.
801<5>[ 3.284768,1] Bridge firewalling registered
802<6>[ 3.284779,1] Ebtables v2.0 registered
803<6>[ 3.284946,1] Bluetooth: ffffffc08e903ce0
804<6>[ 3.284960,1] Bluetooth: ffffffc08e903cd0Bluetooth: ffffffc08e903d10
805<6>[ 3.285009,1] Bluetooth: ffffffc08e903cf0Bluetooth: ffffffc08e903cf0
806<6>[ 3.285026,1] Bluetooth: ffffffc08e903cd0Bluetooth: ffffffc08e903d40
807<6>[ 3.285048,1] Bluetooth: ffffffc08e903d20<6>[ 3.285101,1] l2tp_core: L2TP core driver, V2.0
808<6>[ 3.285121,1] l2tp_ppp: PPPoL2TP kernel driver, V2.0
809<6>[ 3.285132,1] l2tp_ip: L2TP IP encapsulation support (L2TPv3)
810<6>[ 3.285155,1] l2tp_netlink: L2TP netlink interface
811<6>[ 3.285186,1] l2tp_eth: L2TP ethernet pseudowire support (L2TPv3)
812<6>[ 3.285214,1] l2tp_debugfs: L2TP debugfs support
813<6>[ 3.285225,1] l2tp_ip6: L2TP IP encapsulation support for IPv6 (L2TPv3)
814<6>[ 3.285995,1] NET: Registered protocol family 27
815<6>[ 3.290795,2] subsys-pil-tz c200000.qcom,lpass: for adsp segments only will be dumped.
816<6>[ 3.292350,2] subsys-pil-tz a21b000.qcom,pronto: for wcnss segments only will be dumped.
817<6>[ 3.294608,2] pil-q6v5-mss 4080000.qcom,mss: for modem segments only will be dumped.
818<6>[ 3.296317,0] msm_otg 78db000.usb: phy_reset: success
819<6>[ 3.297355,1] registered taskstats version 1
820<6>[ 3.341890,5] mmc1: new ultra high speed DDR50 SDHC card at address aaaa
821<6>[ 3.342244,5] sdhci_msm_pm_qos_cpu_init (): voted for group #0 (mask=0xf) latency=2 (0xffffffc0aff40500)
822<6>[ 3.342261,5] sdhci_msm_pm_qos_cpu_init (): voted for group #1 (mask=0xf0) latency=2 (0xffffffc0aff40508)
823<6>[ 3.342397,5] mmcblk1: mmc1:aaaa SL16G 14.8 GiB
824<6>[ 3.353058,5] mmcblk1: p1
825<6>[ 3.398428,4] sps:BAM 0x00000000078c4000 is registered.
826<3>[ 3.398460,4] IPA HW is not supported on this target
827<6>[ 3.400189,0] msm_otg 78db000.usb: USB in low power mode
828<6>[ 3.434651,2] fastrpc soc:qcom,adsprpc-mem: for adsp_rh segments only will be dumped.
829<1>[ 3.436894,2] drv260x: drv260x_init success
830<6>[ 3.437623,2] utags (utags_probe): Done [config]
831<6>[ 3.437664,2] utags (utags_dt_init): backup storage path not provided
832<6>[ 3.437971,2] utags (utags_probe): Done [hw]
833<6>[ 3.438871,2] RNDIS_IPA module is loaded.
834<6>[ 3.439799,2] file system registered
835<6>[ 3.439866,2] mbim_init: initialize 1 instances
836<6>[ 3.439934,2] mbim_init: Initialized 1 ports
837<6>[ 3.441437,2] rndis_qc_init: initialize rndis QC instance
838<6>[ 3.441691,2] Number of LUNs=8
839<6>[ 3.441702,2] Mass Storage Function, version: 2009/09/11
840<6>[ 3.441712,2] LUN: removable file: (no medium)
841<6>[ 3.441729,2] Number of LUNs=1
842<6>[ 3.441787,2] LUN: removable file: (no medium)
843<6>[ 3.441794,2] Number of LUNs=1
844<6>[ 3.442718,2] android_usb gadget: android_usb ready
845<6>[ 3.442729,2] msm_hsusb msm_hsusb: [ci13xxx_start] hw_ep_max = 32
846<6>[ 3.446081,2] msm_otg 78db000.usb: phy_reset: success
847<6>[ 3.547072,0] msm_otg 78db000.usb: USB exited from low power mode
848<6>[ 3.547094,0] msm_hsusb msm_hsusb: CI13XXX_CONTROLLER_UDC_STARTED_EVENT received
849<6>[ 3.548667,0] msm_otg 78db000.usb: USB in low power mode
850<6>[ 3.549500,0] input: gpio-keys as /devices/soc/soc:gpio_keys/input/input7
851<4>[ 3.549901,0] i2c-core: driver [stmvl53l0] using legacy resume method
852<6>[ 3.551199,0] qcom,qpnp-rtc qpnp-rtc-7: setting system clock to 1970-01-15 05:05:19 UTC (1227919)
853<3>[ 3.557490,1] parse_cpu_levels: idx 1 900
854<3>[ 3.557683,1] calculate_residency: residency < 0 for LPM
855<3>[ 3.557690,1] parse_cpu_levels: idx 1 400
856<3>[ 3.562411,1] qcom,qpnp-flash-led qpnp-flash-led-23: Unable to acquire pinctrl
857<6>[ 3.568397,1] qcom,cc-debug-8952 1874000.qcom,cc-debug: Registered Debug Mux successfully
858<6>[ 3.571159,1] msm8952-asoc-wcd c051000.sound: default codec configured
859<3>[ 3.575649,1] msm8952-asoc-wcd c051000.sound: ASoC: platform (null) not registered
860<3>[ 3.575708,1] msm8952-asoc-wcd c051000.sound: snd_soc_register_card failed (-517)
861<6>[ 3.576487,1] mem_acc_corner: disabling
862<6>[ 3.576498,1] adv_vreg: disabling
863<6>[ 3.576551,1] clock_late_init: Removing enables held for handed-off clocks
864<6>[ 3.579658,1] ALSA device list:
865<6>[ 3.579665,1] No soundcards found.
866<3>[ 3.579751,1] Warning: unable to open an initial console.
867<6>[ 3.579948,1] Freeing unused kernel memory: 508K (ffffffc00165c000 - ffffffc0016db000)
868<6>[ 3.579993,1] Freeing alternatives memory: 76K (ffffffc0016db000 - ffffffc0016ee000)
869<13>[ 3.581468,1] init: init first stage started!
870<7>[ 3.587518,1] SELinux: 2048 avtab hash slots, 6784 rules.
871<7>[ 3.592306,1] SELinux: 2048 avtab hash slots, 6784 rules.
872<7>[ 3.592329,1] SELinux: 1 users, 2 roles, 662 types, 0 bools, 1 sens, 1024 cats
873<7>[ 3.592338,1] SELinux: 63 classes, 6784 rules
874<6>[ 3.594176,1] SELinux: Class can_socket not defined in policy.
875<6>[ 3.594185,1] SELinux: the above unknown classes and permissions will be denied
876<7>[ 3.594217,1] SELinux: Completing initialization.
877<7>[ 3.594222,1] SELinux: Setting up existing superblocks.
878<7>[ 3.594237,1] SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
879<7>[ 3.594259,1] SELinux: initialized (dev rootfs, type rootfs), uses genfs_contexts
880<7>[ 3.594864,1] SELinux: initialized (dev bdev, type bdev), not configured for labeling
881<7>[ 3.594877,1] SELinux: initialized (dev proc, type proc), uses genfs_contexts
882<7>[ 3.594901,1] SELinux: initialized (dev debugfs, type debugfs), uses genfs_contexts
883<7>[ 3.609923,1] SELinux: initialized (dev sockfs, type sockfs), uses task SIDs
884<7>[ 3.609944,1] SELinux: initialized (dev tracefs, type tracefs), uses genfs_contexts
885<6>[ 3.626786,5] synaptics_dsx_i2c 3-0020: RxTx mapped from F$55
886<6>[ 3.626786,5]
887<6>[ 3.626786,5] Rx mapped count 23(23)
888<6>[ 3.626786,5] Tx mapped count 13(14)
889<6>[ 3.626786,5]
890<3>[ 3.627456,5] synaptics_rmi4_detection_work: F54_Ctrl scan failed
891<3>[ 3.627469,5] synaptics_rmi4_detection_work: F54_Data scan failed
892<6>[ 3.628173,5] synaptics_dsx_i2c 3-0020: fwu_scan_pdt: BL version = 5
893<7>[ 3.634710,1] SELinux: initialized (dev pipefs, type pipefs), uses task SIDs
894<7>[ 3.634723,1] SELinux: initialized (dev anon_inodefs, type anon_inodefs), not configured for labeling
895<7>[ 3.634733,1] SELinux: initialized (dev aio, type aio), not configured for labeling
896<7>[ 3.634746,1] SELinux: initialized (dev devpts, type devpts), uses transition SIDs
897<7>[ 3.634769,1] SELinux: initialized (dev selinuxfs, type selinuxfs), uses genfs_contexts
898<7>[ 3.634847,1] SELinux: initialized (dev configfs, type configfs), uses genfs_contexts
899<7>[ 3.634858,1] SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
900<7>[ 3.634887,1] SELinux: initialized (dev sysfs, type sysfs), uses genfs_contexts
901<5>[ 3.647302,1] audit: type=1403 audit(1227919.593:2): policy loaded auid=4294967295 ses=4294967295
902<13>[ 3.648012,1] init: (Initializing SELinux non-enforcing took 0.07s.)
903<13>[ 3.650744,1] init: init second stage started!
904<4>[ 3.653414,1] bcl_peripheral:bcl_poll_vbat_high Vbat reached high clear trip. vbat:3856320
905<3>[ 3.653487,1] bcl_peripheral:bcl_poll_ibat_low Invalid ibat state 1
906<13>[ 3.656419,1] init: Running restorecon...
907<11>[ 3.736458,0] init: waitpid failed: No child processes
908<13>[ 3.737056,0] init: (Loading properties from /default.prop took 0.00s.)
909<11>[ 3.737739,0] init: /init.rc: 13: invalid keyword 'setcon'
910<11>[ 3.737992,0] init: /init.rc: 63: invalid keyword 'load_all_props'
911<11>[ 3.738152,0] init: could not import file '/init.recovery.logd.rc' from '/init.rc': No such file or directory
912<13>[ 3.738297,0] init: (Parsing /init.recovery.usb.rc took 0.00s.)
913<13>[ 3.738368,0] init: (Parsing /init.recovery.service.rc took 0.00s.)
914<13>[ 3.738529,0] init: (Parsing /init.recovery.vold_decrypt.qseecomd.rc took 0.00s.)
915<13>[ 3.738548,0] init: (Parsing /init.recovery.vold_decrypt.rc took 0.00s.)
916<13>[ 3.738673,0] init: (Parsing /init.recovery.qcom.rc took 0.00s.)
917<13>[ 3.738693,0] init: (Parsing /init.rc took 0.00s.)
918<5>[ 3.738828,0] audit: type=1400 audit(1227919.683:3): avc: denied { setcheckreqprot } for uid=0 pid=1 comm="init" scontext=u:r:init:s0 tcontext=u:object_r:kernel:s0 tclass=security permissive=1
919<13>[ 3.739014,0] init: Starting service 'ueventd'...
920<13>[ 3.739448,0] init: Starting service 'healthd'...
921<13>[ 3.739989,0] init: Waiting for /dev/.coldboot_done...
922<13>[ 3.741176,1] ueventd: ueventd started!
923<11>[ 3.742134,1] ueventd: invalid gid 'mot_tcmd'
924<11>[ 3.742151,1] ueventd: invalid gid 'mot_tcmd'
925<11>[ 3.742167,1] ueventd: invalid uid 'mot_tcmd'
926<11>[ 3.742182,1] ueventd: invalid uid 'mot_tcmd'
927<11>[ 3.742197,1] ueventd: invalid uid 'mot_tcmd'
928<11>[ 3.742212,1] ueventd: invalid uid 'mot_tcmd'
929<11>[ 3.742227,1] ueventd: invalid gid 'mot_mod'
930<11>[ 3.742242,1] ueventd: invalid gid 'mot_mod'
931<11>[ 3.742256,1] ueventd: invalid gid 'mot_mod'
932<11>[ 3.742271,1] ueventd: invalid gid 'mot_mod'
933<11>[ 3.742286,1] ueventd: invalid gid 'mot_mod'
934<11>[ 3.742301,1] ueventd: invalid gid 'mot_mod'
935<11>[ 3.742316,1] ueventd: invalid gid 'mot_mod'
936<11>[ 3.742331,1] ueventd: invalid gid 'mot_mod'
937<11>[ 3.742346,1] ueventd: invalid gid 'mot_mod'
938<11>[ 3.742361,1] ueventd: invalid gid 'mot_mod'
939<11>[ 3.742376,1] ueventd: invalid gid 'mot_mod'
940<11>[ 3.742391,1] ueventd: invalid gid 'mot_mod'
941<11>[ 3.742406,1] ueventd: invalid gid 'mot_mod'
942<11>[ 3.742421,1] ueventd: invalid gid 'mot_mod'
943<11>[ 3.742436,1] ueventd: invalid gid 'mot_mod'
944<11>[ 3.742450,1] ueventd: invalid gid 'mot_mod'
945<11>[ 3.742465,1] ueventd: invalid gid 'mot_mod'
946<11>[ 3.742480,1] ueventd: invalid gid 'mot_mod'
947<11>[ 3.742495,1] ueventd: invalid gid 'mot_mod'
948<11>[ 3.742509,1] ueventd: invalid gid 'mot_mod'
949<11>[ 3.742524,1] ueventd: invalid gid 'mot_mod'
950<11>[ 3.742540,1] ueventd: invalid gid 'mot_mod'
951<11>[ 3.742554,1] ueventd: invalid gid 'mot_mod'
952<11>[ 3.742569,1] ueventd: invalid gid 'mot_mod'
953<11>[ 3.742584,1] ueventd: invalid gid 'mot_mod'
954<11>[ 3.742604,1] ueventd: invalid gid 'mot_mod'
955<11>[ 3.742623,1] ueventd: invalid gid 'mot_mod'
956<11>[ 3.742642,1] ueventd: invalid uid 'mot_dtv'
957<6>[ 4.103517,0] qpnp-smbcharger qpnp-smbcharger-17: Start APSD Rerun!
958<13>[ 4.212956,1] ueventd: Coldboot took 0.47s.
959<13>[ 4.214492,5] init: Waiting for /dev/.coldboot_done took 0.47s.
960<7>[ 4.217494,5] SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
961<6>[ 4.219173,5] pstore: Found record type 2, psi name ramoops
962<6>[ 4.219189,5] persistent_ram: persistent_ram_annotation_merge: merged 64
963<6>[ 4.219211,5] pstore: Found record type 8, psi name ramoops
964<7>[ 4.219260,5] SELinux: initialized (dev pstore, type pstore), uses genfs_contexts
965<7>[ 4.220164,5] SELinux: initialized (dev functionfs, type functionfs), uses genfs_contexts
966<3>[ 4.220318,5] enable_store: android_usb: already disabled
967<11>[ 4.220731,5] init: property 'ro.product.model' doesn't exist while expanding '${ro.product.model}'
968<11>[ 4.220751,5] init: write: cannot expand '${ro.product.model}'
969<13>[ 4.221209,5] init: (Loading properties from /system/build.prop took 0.00s.)
970<13>[ 4.221254,5] init: (Loading properties from /vendor/build.prop took 0.00s.)
971<13>[ 4.221295,5] init: (Loading properties from /factory/factory.prop took 0.00s.)
972<11>[ 4.221362,5] fs_mgr: No entries found in fstab
973<11>[ 4.221388,5] init: unable to read fstab /fstab.qcom: No such file or directory
974<13>[ 4.221445,5] init: (Loading properties from /data/local.prop took 0.00s.)
975<11>[ 4.221485,5] init: Unable to open persistent property directory "/data/property": No such file or directory
976<13>[ 4.222164,5] init: Starting service 'set_permissive'...
977<13>[ 4.222672,5] init: Starting service 'recovery'...
978<13>[ 4.223324,5] init: Starting service 'adbd'...
979<5>[ 4.223821,0] random: permissive.sh urandom read with 95 bits of entropy available
980<6>[ 4.227737,2] read descriptors
981<6>[ 4.227754,2] read strings
982<5>[ 4.241038,2] audit: type=1400 audit(1227920.186:4): avc: denied { write } for uid=0 pid=369 comm="setenforce" name="enforce" dev="selinuxfs" ino=4 scontext=u:r:recovery:s0 tcontext=u:object_r:selinuxfs:s0 tclass=file permissive=1
983<13>[ 4.242274,4] init: Service 'set_permissive' (pid 363) exited with status 0
984<11>[ 4.288017,4] init: avc: denied { set } for property=twrp.crash_counter pid=364 uid=0 gid=0 scontext=u:r:recovery:s0 tcontext=u:object_r:default_prop:s0 tclass=property_service permissive=1
985<6>[ 4.309987,0] mdss_dsi_on[0]+.
986<6>[ 4.320106,1] synaptics_dsx_sensor_state: state change STANDBY -> ACTIVE
987<6>[ 4.337766,0] synaptics_dsx_sensor_state: state change ACTIVE -> SUSPEND
988<6>[ 4.337769,0] synaptics_rmi4_suspend: screen:
989<6>[ 4.376754,4] mdss_dsi_panel_off[0]+.
990<6>[ 4.496932,4] mdss_dsi_off[0]+.
991<6>[ 4.508853,4] mdss_dsi_on[0]+.
992<6>[ 4.553304,4] mdss_dsi_panel_on[0]+.
993<6>[ 4.694102,4] mdss_dsi_panel_on[0]-. Pwr_mode(0x0A) = 0x9c
994<6>[ 4.738471,4] synaptics_dsx_sensor_state: state change SUSPEND -> ACTIVE
995<6>[ 4.812370,0] input input7: gpio-keys report volume_up [0x73] type 0x1 state Off
996<5>[ 4.812575,0] audit: type=1400 audit(1227920.760:5): avc: denied { write } for uid=0 pid=364 comm="recovery" name="etc" dev="rootfs" ino=227 scontext=u:r:recovery:s0 tcontext=u:object_r:rootfs:s0 tclass=dir permissive=1
997<5>[ 4.812604,0] audit: type=1400 audit(1227920.760:6): avc: denied { add_name } for uid=0 pid=364 comm="recovery" name="mtab" scontext=u:r:recovery:s0 tcontext=u:object_r:rootfs:s0 tclass=dir permissive=1
998<5>[ 4.812644,0] audit: type=1400 audit(1227920.760:7): avc: denied { create } for uid=0 pid=364 comm="recovery" name="mtab" scontext=u:r:recovery:s0 tcontext=u:object_r:rootfs:s0 tclass=lnk_file permissive=1
999<5>[ 4.813475,0] audit: type=1400 audit(1227920.760:8): avc: denied { create } for uid=0 pid=364 comm="recovery" name="persist" scontext=u:r:recovery:s0 tcontext=u:object_r:rootfs:s0 tclass=dir permissive=1
1000<3>[ 4.832501,4] F2FS-fs (mmcblk0p54): Unrecognized mount option "rw" or missing value
1001<3>[ 4.832524,4] F2FS-fs (mmcblk0p54): Unrecognized mount option "rw" or missing value
1002<7>[ 4.868524,4] SELinux: initialized (dev mmcblk0p54, type f2fs), uses xattr
1003<5>[ 4.869676,4] audit: type=1400 audit(1227920.813:9): avc: denied { getattr } for uid=0 pid=364 comm="recovery" path="/data/media" dev="mmcblk0p54" ino=6 scontext=u:r:recovery:s0 tcontext=u:object_r:media_rw_data_file:s0 tclass=dir permissive=1
1004<5>[ 4.891212,4] audit: type=1400 audit(1227920.836:10): avc: denied { search } for uid=0 pid=364 comm="recovery" name="media" dev="mmcblk0p54" ino=6 scontext=u:r:recovery:s0 tcontext=u:object_r:media_rw_data_file:s0 tclass=dir permissive=1
1005<3>[ 4.916713,0] F2FS-fs (mmcblk0p54): Unrecognized mount option "rw" or missing value
1006<3>[ 4.916739,0] F2FS-fs (mmcblk0p54): Unrecognized mount option "rw" or missing value
1007<7>[ 4.949731,1] SELinux: initialized (dev mmcblk0p54, type f2fs), uses xattr
1008<6>[ 4.982875,5] msm_otg 78db000.usb: phy_reset: success
1009<3>[ 4.983868,2] qpnp-smbcharger qpnp-smbcharger-17: Battery Temp State = Good
1010<3>[ 5.004963,6] F2FS-fs (mmcblk0p54): Unrecognized mount option "rw" or missing value
1011<3>[ 5.004987,6] F2FS-fs (mmcblk0p54): Unrecognized mount option "rw" or missing value
1012<7>[ 5.038221,4] SELinux: initialized (dev mmcblk0p54, type f2fs), uses xattr
1013<3>[ 5.077699,0] F2FS-fs (mmcblk0p54): Unrecognized mount option "rw" or missing value
1014<3>[ 5.077721,0] F2FS-fs (mmcblk0p54): Unrecognized mount option "rw" or missing value
1015<6>[ 5.083761,5] msm_otg 78db000.usb: USB exited from low power mode
1016<6>[ 5.085584,5] msm_hsusb msm_hsusb: CI13XXX_CONTROLLER_RESET_EVENT received
1017<6>[ 5.085600,5] msm_hsusb msm_hsusb: CI13XXX_CONTROLLER_CONNECT_EVENT received
1018<5>[ 5.088534,0] random: nonblocking pool is initialized
1019<7>[ 5.109749,1] SELinux: initialized (dev mmcblk0p54, type f2fs), uses xattr
1020<6>[ 5.139081,4] EXT4-fs (mmcblk0p52): mounted filesystem with ordered data mode. Opts:
1021<7>[ 5.139119,4] SELinux: initialized (dev mmcblk0p52, type ext4), uses xattr
1022<6>[ 5.155079,3] EXT4-fs (mmcblk0p53): mounted filesystem with ordered data mode. Opts:
1023<7>[ 5.155108,3] SELinux: initialized (dev mmcblk0p53, type ext4), uses xattr
1024<6>[ 5.176551,3] SELinux: Context u:object_r:textclassifier_data_file:s0 is not valid (left unmapped).
1025<6>[ 5.182742,3] SELinux: Context u:object_r:hostapd_socket:s0 is not valid (left unmapped).
1026<6>[ 5.188994,0] msm_otg 78db000.usb: Avail curr from USB = 100
1027<6>[ 5.189449,0] android_work: android_work: did not send uevent (0 0 (null))
1028<6>[ 5.196082,3] SELinux: Context u:object_r:reboot_data_file:s0 is not valid (left unmapped).
1029<6>[ 5.257191,0] android_work: android_work: sent uevent USB_STATE=CONNECTED
1030<6>[ 5.473013,1] SELinux: Context u:object_r:dts_data_file:s0 is not valid (left unmapped).
1031<6>[ 5.473596,1] SELinux: Context u:object_r:hbtp_log_file:s0 is not valid (left unmapped).
1032<6>[ 5.476368,1] SELinux: Context u:object_r:data_qsee_file:s0 is not valid (left unmapped).
1033<6>[ 5.479447,1] SELinux: Context u:object_r:netmgr_data_file:s0 is not valid (left unmapped).
1034<6>[ 5.490665,1] SELinux: Context u:object_r:fm_data_file:s0 is not valid (left unmapped).
1035<6>[ 5.495820,1] SELinux: Context u:object_r:akmd_data_file:s0 is not valid (left unmapped).
1036<6>[ 5.497872,1] SELinux: Context u:object_r:cutback_data_file:s0 is not valid (left unmapped).
1037<6>[ 5.498966,1] SELinux: Context u:object_r:sds_data_file:s0 is not valid (left unmapped).
1038<6>[ 5.508106,1] SELinux: Context u:object_r:dbvc_data_file:s0 is not valid (left unmapped).
1039<6>[ 5.508705,1] SELinux: Context u:object_r:moodle_data_file:s0 is not valid (left unmapped).
1040<6>[ 5.691384,0] android_usb gadget: high-speed config #1: 86000c8.android_usb
1041<6>[ 5.691448,0] msm_otg 78db000.usb: Avail curr from USB = 500
1042<6>[ 5.743578,0] android_work: android_work: sent uevent USB_STATE=CONFIGURED
1043<3>[ 6.593509,3] FG: fg_get_mmi_battid: Battsn unused
1044<4>[ 6.593531,3] qcom,qpnp-fg qpnp-fg-18: Default Serial Number SNN5976A
1045<4>[ 6.593541,3] qcom,qpnp-fg qpnp-fg-18: Battery Match Found using default qcom,gk40-atl
1046<6>[ 6.597278,3] FG: fg_batt_profile_init: Battery profiles same, using default
1047<6>[ 6.599949,3] FG: populate_system_data: cutoff_voltage = 3199901, nom_cap_uah = 2876000 p1p2 = 34, p2p3 = 7
1048<6>[ 6.601303,3] FG: fg_batt_profile_init: Battery SOC: 58, V: 3895698uV
1049<4>[ 15.193335,4] audit_printk_skb: 363 callbacks suppressed
1050<5>[ 15.193418,0] audit: type=1400 audit(1227931.136:132): avc: denied { getattr } for uid=0 pid=364 comm="recovery" path="/data/app-private" dev="mmcblk0p54" ino=53872 scontext=u:r:recovery:s0 tcontext=u:object_r:apk_private_data_file:s0 tclass=dir permissive=1
1051<5>[ 15.193490,0] audit: type=1400 audit(1227931.140:133): avc: denied { read } for uid=0 pid=364 comm="recovery" name="app-private" dev="mmcblk0p54" ino=53872 scontext=u:r:recovery:s0 tcontext=u:object_r:apk_private_data_file:s0 tclass=dir permissive=1
1052<5>[ 15.193523,0] audit: type=1400 audit(1227931.140:134): avc: denied { open } for uid=0 pid=364 comm="recovery" path="/data/app-private" dev="mmcblk0p54" ino=53872 scontext=u:r:recovery:s0 tcontext=u:object_r:apk_private_data_file:s0 tclass=dir permissive=1
1053<5>[ 15.195045,0] audit: type=1400 audit(1227931.140:135): avc: denied { getattr } for uid=0 pid=364 comm="recovery" path="/data/app-asec" dev="mmcblk0p54" ino=53876 scontext=u:r:recovery:s0 tcontext=u:object_r:asec_image_file:s0 tclass=dir permissive=1
1054<5>[ 15.195085,0] audit: type=1400 audit(1227931.140:136): avc: denied { read } for uid=0 pid=364 comm="recovery" name="app-asec" dev="mmcblk0p54" ino=53876 scontext=u:r:recovery:s0 tcontext=u:object_r:asec_image_file:s0 tclass=dir permissive=1
1055<5>[ 15.195115,0] audit: type=1400 audit(1227931.140:137): avc: denied { open } for uid=0 pid=364 comm="recovery" path="/data/app-asec" dev="mmcblk0p54" ino=53876 scontext=u:r:recovery:s0 tcontext=u:object_r:asec_image_file:s0 tclass=dir permissive=1
1056<5>[ 15.196594,0] audit: type=1400 audit(1227931.140:138): avc: denied { read } for uid=0 pid=364 comm="recovery" name="app" dev="mmcblk0p54" ino=53880 scontext=u:r:recovery:s0 tcontext=u:object_r:apk_data_file:s0 tclass=dir permissive=1
1057<5>[ 15.196624,0] audit: type=1400 audit(1227931.140:139): avc: denied { open } for uid=0 pid=364 comm="recovery" path="/data/app" dev="mmcblk0p54" ino=53880 scontext=u:r:recovery:s0 tcontext=u:object_r:apk_data_file:s0 tclass=dir permissive=1
1058<5>[ 15.200253,5] audit: type=1400 audit(1227931.146:140): avc: denied { read } for uid=0 pid=364 comm="recovery" name="oat" dev="mmcblk0p54" ino=53890 scontext=u:r:recovery:s0 tcontext=u:object_r:dalvikcache_data_file:s0 tclass=dir permissive=1
1059<5>[ 15.200296,5] audit: type=1400 audit(1227931.146:141): avc: denied { open } for uid=0 pid=364 comm="recovery" path="/data/app/com.mixplorer-opQQeYEJZjAoCjWPKU4XFQ==/oat" dev="mmcblk0p54" ino=53890 scontext=u:r:recovery:s0 tcontext=u:object_r:dalvikcache_data_file:s0 tclass=dir permissive=1
1060<6>[ 15.598514,0] SELinux: Context u:object_r:swap_data_file:s0 is not valid (left unmapped).
1061<6>[ 16.650875,5] SELinux: Context u:object_r:cnd_data_file:s0 is not valid (left unmapped).
1062<6>[ 16.651642,5] SELinux: Context u:object_r:dpmd_data_file:s0 is not valid (left unmapped).
1063<6>[ 16.660377,0] SELinux: Context u:object_r:wapi_supplicant_data_file:s0 is not valid (left unmapped).
1064<6>[ 16.669736,0] SELinux: Context u:object_r:adspd_data_file:s0 is not valid (left unmapped).
1065<3>[ 16.686640,6] EXT4-fs (mmcblk0p30): Unrecognized mount option "noatime" or missing value
1066<6>[ 16.689153,6] EXT4-fs (mmcblk0p30): mounted filesystem with ordered data mode. Opts: (null)
1067<7>[ 16.689178,6] SELinux: initialized (dev mmcblk0p30, type ext4), uses xattr
1068<3>[ 16.697265,6] EXT4-fs (mmcblk0p19): Unrecognized mount option "ro" or missing value
1069<6>[ 16.699970,6] EXT4-fs (mmcblk0p19): mounted filesystem with ordered data mode. Opts: (null)
1070<7>[ 16.699992,6] SELinux: initialized (dev mmcblk0p19, type ext4), uses xattr
1071<4>[ 16.864708,6] FAT-fs (mmcblk1p1): Volume was not properly unmounted. Some data may be corrupt. Please run fsck.
1072<7>[ 16.864785,6] SELinux: initialized (dev mmcblk1p1, type vfat), uses genfs_contexts
1073<4>[ 19.365484,3] FAT-fs (mmcblk1p1): Volume was not properly unmounted. Some data may be corrupt. Please run fsck.
1074<7>[ 19.365513,3] SELinux: initialized (dev mmcblk1p1, type vfat), uses genfs_contexts
1075<11>[ 19.463644,4] init: avc: denied { set } for property=sys.usb.config pid=364 uid=0 gid=0 scontext=u:r:recovery:s0 tcontext=u:object_r:system_radio_prop:s0 tclass=property_service permissive=1
1076<4>[ 19.464513,4] enable_store: 1 callbacks suppressed
1077<3>[ 19.464528,4] enable_store: android_usb: already disabled
1078<6>[ 19.464774,4] mtp_bind_config
1079<6>[ 19.496793,6] msm_hsusb msm_hsusb: CI13XXX_CONTROLLER_CONNECT_EVENT received
1080<6>[ 19.499861,0] msm_otg 78db000.usb: Avail curr from USB = 2
1081<6>[ 19.499886,0] msm_hsusb msm_hsusb: CI13XXX_CONTROLLER_SUSPEND_EVENT received
1082<6>[ 19.499912,0] android_work: android_work: did not send uevent (1 1 (null))
1083<6>[ 19.512280,4] EXT4-fs (mmcblk0p53): mounted filesystem with ordered data mode. Opts:
1084<7>[ 19.512311,4] SELinux: initialized (dev mmcblk0p53, type ext4), uses xattr
1085<6>[ 19.668164,0] msm_hsusb msm_hsusb: CI13XXX_CONTROLLER_RESUME_EVENT received
1086<6>[ 19.668209,0] msm_otg 78db000.usb: Avail curr from USB = 100
1087<6>[ 19.668364,0] android_work: android_work: sent uevent USB_STATE=DISCONNECTED
1088<6>[ 19.736307,0] android_work: android_work: sent uevent USB_STATE=CONNECTED
1089<6>[ 20.183966,0] android_usb gadget: high-speed config #1: 86000c8.android_usb
1090<6>[ 20.184028,0] msm_otg 78db000.usb: Avail curr from USB = 500
1091<6>[ 20.236759,0] android_work: android_work: sent uevent USB_STATE=CONFIGURED
1092<4>[ 20.267695,0] audit_printk_skb: 255 callbacks suppressed
1093<5>[ 20.267703,0] audit: type=1400 audit(1512919570.543:227): avc: denied { read write } for uid=0 pid=415 comm="recovery" name="mtp_usb" dev="tmpfs" ino=17001 scontext=u:r:recovery:s0 tcontext=u:object_r:mtp_device:s0 tclass=chr_file permissive=1
1094<5>[ 20.267739,0] audit: type=1400 audit(1512919570.543:228): avc: denied { open } for uid=0 pid=415 comm="recovery" path="/dev/mtp_usb" dev="tmpfs" ino=17001 scontext=u:r:recovery:s0 tcontext=u:object_r:mtp_device:s0 tclass=chr_file permissive=1
1095<6>[ 20.267754,0] mtp_open
1096<5>[ 20.269314,1] audit: type=1400 audit(1512919570.543:229): avc: denied { read } for uid=0 pid=415 comm="recovery" name="/" dev="mmcblk1p1" ino=1 scontext=u:r:recovery:s0 tcontext=u:object_r:vfat:s0 tclass=dir permissive=1
1097<5>[ 20.269349,1] audit: type=1400 audit(1512919570.543:230): avc: denied { open } for uid=0 pid=415 comm="recovery" path="/external_sd" dev="mmcblk1p1" ino=1 scontext=u:r:recovery:s0 tcontext=u:object_r:vfat:s0 tclass=dir permissive=1
1098<5>[ 20.291545,1] audit: type=1400 audit(1512919570.566:231): avc: denied { getattr } for uid=0 pid=415 comm="recovery" path=2F65787465726E616C5F73642F456D6265646465642050726F6772616D6D696E67207769746820416E64726F6964544D2E706466 dev="mmcblk1p1" ino=26 scontext=u:r:recovery:s0 tcontext=u:object_r:vfat:s0 tclass=file permissive=1
1099<5>[ 23.211453,0] audit: type=1400 audit(1512919573.486:232): avc: denied { read write } for uid=0 pid=422 comm="recovery" name="0" dev="devpts" ino=3 scontext=u:r:recovery:s0 tcontext=u:object_r:devpts:s0 tclass=chr_file permissive=1
1100<5>[ 23.211499,0] audit: type=1400 audit(1512919573.486:233): avc: denied { open } for uid=0 pid=422 comm="recovery" path="/dev/pts/0" dev="devpts" ino=3 scontext=u:r:recovery:s0 tcontext=u:object_r:devpts:s0 tclass=chr_file permissive=1
1101<5>[ 23.211567,0] audit: type=1400 audit(1512919573.486:234): avc: denied { ioctl } for uid=0 pid=422 comm="recovery" path="/dev/pts/0" dev="devpts" ino=3 ioctlcmd=540e scontext=u:r:recovery:s0 tcontext=u:object_r:devpts:s0 tclass=chr_file permissive=1
1102<5>[ 23.226960,0] audit: type=1400 audit(1512919573.503:235): avc: denied { getattr } for uid=0 pid=422 comm="sh" path="/dev/pts/0" dev="devpts" ino=3 scontext=u:r:recovery:s0 tcontext=u:object_r:devpts:s0 tclass=chr_file permissive=1
1103<4>[ 50.311046,1] EXT4-fs (mmcblk0p53): warning: maximal mount count reached, running e2fsck is recommended
1104<6>[ 50.311451,1] EXT4-fs (mmcblk0p53): mounted filesystem with ordered data mode. Opts:
1105<7>[ 50.311475,1] SELinux: initialized (dev mmcblk0p53, type ext4), uses xattr