· 8 years ago · Jul 26, 2018, 12:28 PM
1[ 3.292163] usb usb1: Manufacturer: Linux 4.9.0 xhci-hcd
2[ 3.297464] usb usb1: SerialNumber: xhci-hcd.0.auto
3[ 3.298798] ata1.00: ATA-8: ST9250315AS, 0002SDM1, max UDMA/133
4[ 3.298802] ata1.00: 488397168 sectors, multi 16: LBA48 NCQ (depth 31/32)
5[ 3.302313] ata1.00: configured for UDMA/133
6[ 3.302629] scsi 0:0:0:0: Direct-Access ATA ST9250315AS SDM1 PQ: 0 ANSI: 5
7[ 3.327657] hub 1-0:1.0: USB hub found
8[ 3.331339] hub 1-0:1.0: 1 port detected
9[ 3.335340] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller
10[ 3.340744] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 2
11[ 3.348417] usb usb2: We don't know the algorithms for LPM for this host, disabling LPM.
12[ 3.356517] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003
13[ 3.363219] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
14[ 3.370422] usb usb2: Product: xHCI Host Controller
15[ 3.375282] usb usb2: Manufacturer: Linux 4.9.0 xhci-hcd
16[ 3.380576] usb usb2: SerialNumber: xhci-hcd.0.auto
17[ 3.385648] hub 2-0:1.0: USB hub found
18[ 3.389327] hub 2-0:1.0: 1 port detected
19[ 3.393612] rtc_zynqmp ffa60000.rtc: setting system clock to 1970-01-01 00:00:15 UTC (15)
20[ 3.401817] clk: Not disabling unused clocks
21[ 3.406005] ALSA device list:
22[ 3.408953] #0: DisplayPort monitor
23[ 3.423071] sd 0:0:0:0: [sda] 488397168 512-byte logical blocks: (250 GB/233 GiB)
24[ 3.430576] sd 0:0:0:0: [sda] Write Protect is off
25[ 3.435333] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
26[ 3.473157] sd 0:0:0:0: [sda] Attached SCSI disk
27[ 3.477877] Freeing unused kernel memory: 448K (ffffffc000b70000 - ffffffc000be0000)
28INIT: version 2.88 booting
29Starting udev
30[ 3.593080] udevd[1621]: starting version 3.2
31[ 3.597704] random: udevd: uninitialized urandom read (16 bytes read)
32[ 3.604132] random: udevd: uninitialized urandom read (16 bytes read)
33[ 3.610544] random: udevd: uninitialized urandom read (16 bytes read)
34[ 3.616936] random: udevd: uninitialized urandom read (16 bytes read)
35[ 3.626966] udevd[1622]: starting eudev-3.2
36[ 3.670516] random: udevd: uninitialized urandom read (16 bytes read)
37[ 3.680717] random: udevd: uninitialized urandom read (16 bytes read)
38[ 3.706109] dsaxidma: loading out-of-tree module taints kernel.
39[ 3.713245] <dma1> init: registered
40[ 3.723934] <dma2> init: registered
41[ 4.166628] EXT4-fs (sda): recovery complete
42[ 4.190532] EXT4-fs (sda): mounted filesystem with ordered data mode. Opts: (null)
43Populating dev cache
44[ 4.445767] random: dd: uninitialized urandom read (512 bytes read)
45Thu Jul 26 08:51:43 UTC 2018
46Starting internet superserver: inetd.
47Running postinst /etc/rpm-postinsts/100-sysvinit-inittab...
48update-rc.d: /etc/init.d/run-postinsts exists during rc.d purge (continuing)
49INIT: Entering runlevel: 5
50Hello World
51[22]:0x12
52[20]:0x201
53[20]:0x201
54[22]:0x1
55[0]:0x140
56[0]:0x140
57Configuring network interfaces... [ 4.744900] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
58done.
59Starting Dropbear SSH server: [ 4.773180] random: dropbearkey: uninitialized urandom read (32 bytes read)
60[ 4.783309] random: dropbearkey: uninitialized urandom read (32 bytes read)
61Generating key, this may take a while...
62[ 5.778887] macb ff0c0000.ethernet eth0: link up (1000/Full)
63[ 5.784486] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
64[ 6.407416] random: dropbearkey: uninitialized urandom read (32 bytes read)
65Public key portion is:
66ssh-rsa AAAAB3NzaC1yc2EAAAADAQABAAABAQCK0naj+0UCnif/2VopBaVwF/+I1yLTEQdoUz7AqwrFWlHGIq+DgAbmG8CPupqYoybMm0N4ALyqtz292O4HQ+t171v/DME+gXeXcJI/pwc35GY5VDQ5DskkbhS2hAz96PbNEZO1weDrvOMtaGK3Bh7rsdVKjJnx2H5YcOPvQui2Fqo0ukoRzE/WGrTzUI6Ethcl91qYPg1eBlQR3noAgkYQ0vptDvc2a8Rl28TcRaliyCLouVjr4GHydj+u5OlJ6xDCCuUPalVeVhariJc8IWWxKfXUfYSqmZ2l1QPTH8LptJgIWH27NwaOJUH9bRF0iQM/FnzvVHfBVRs1mqwSXc2h root@VP88x_2017_3_PRJ0191
67Fingerprint: md5 30:f0:eb:f9:63:02:ef:66:70:2c:7e:26:59:59:33:7f
68dropbear.
69Starting syslogd/klogd: done
70[ 6.461511] random: fast init done
71[ 6.752986] random: crng init done
72[ 8.676188] jffs2: notice: (2106) jffs2_build_xattr_subsystem: complete building xattr subsystem, 0 of xdatum (0 unchecked, 0 orphan) and 0 of xref (0 dead, 0 orphan) found.
73hello world.....
74Starting tcf-agent: OK
75
76root@VP88x_2017_3_PRJ0191:~# mount /dev/sda /mnt
77root@VP88x_2017_3_PRJ0191:~# ls /mnt
78lost+found xxx
79root@VP88x_2017_3_PRJ0191:~# cat /mnt/xxx
80dfsdsdf
81root@VP88x_2017_3_PRJ0191:~# mkfs.
82mkfs.ext2 mkfs.ext4 mkfs.jffs2
83mkfs.ext3 mkfs.ext4dev mkfs.vfat
84root@VP88x_2017_3_PRJ0191:~# mkfs.
85mkfs.ext2 mkfs.ext4 mkfs.jffs2
86mkfs.ext3 mkfs.ext4dev mkfs.vfat
87root@VP88x_2017_3_PRJ0191:~# mkfs.vfat --help
88BusyBox v1.24.1 (2018-05-24 10:33:04 MDT) multi-call binary.
89
90Usage: mkfs.vfat [-v] [-n LABEL] BLOCKDEV [KBYTES]
91
92Make a FAT32 filesystem
93
94 -v Verbose
95 -n LBL Volume label
96root@VP88x_2017_3_PRJ0191:~# mkfs.vfat /dev/sda
97[ 97.394817] JBD2: Spotted dirty metadata buffer (dev = sda, blocknr = 1). There's a risk of filesystem corruption in case of system crash.
98^C
99root@VP88x_2017_3_PRJ0191:~# umount /de[ 100.882849] EXT4-fs error (device sda): ext4_map_blocks:568: inode #8: block 30441521: comm jbd2/sda-8: lblock 49 mapped to illegal pblock (length 1)
100v[ 100.943404] jbd2_journal_bmap: journal block not found at offset 49 on sda-8
101[ 100.950369] Aborting journal on device sda-8.
102/[ 101.163456] EXT4-fs error (device sda): ext4_journal_check_start:56: Detected aborted journal
103[ 101.171900] EXT4-fs (sda): Remounting filesystem read-only
104sda
105[ 102.660635] EXT4-fs error (device sda): ext4_put_super:840: Couldn't clean up the journal
106root@VP88x_2017_3_PRJ0191:~#
107root@VP88x_2017_3_PRJ0191:~#
108root@VP88x_2017_3_PRJ0191:~#
109root@VP88x_2017_3_PRJ0191:~# mkfs.vfat /dev/sda
110root@VP88x_2017_3_PRJ0191:~# [ 117.462911] sda:
111
112root@VP88x_2017_3_PRJ0191:~#
113root@VP88x_2017_3_PRJ0191:~#
114root@VP88x_2017_3_PRJ0191:~# mount /dev/sda /mnt
115root@VP88x_2017_3_PRJ0191:~# vi /mnt/xxx
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141sdfsdsdf`:wq
142
143~
144~
145~
146~
147~
148~
149~
150~
151~
152~
153~
154~
155~
156~
157~
158~
159~
160~
161~
162~
163~
164 re's a risk of filesystem corruption in case of system crash.
165^C
166root@VP88x_2017_3_PRJ0191:~# umount /de[ 100.882849] EXT4-fs error (device sda): ext4_map_blocks:568: inode #8: block 30441521: comm jbd2/sda-8: lblock 49 mapped to illegal pblock (length 1)
167v[ 100.943404] jbd2_journal_bmap: journal block not found at offset 49 on sda-8
168[ 100.950369] Aborting journal on device sda-8.
169/[ 101.163456] EXT4-fs error (device sda): ext4_journal_check_start:56: Detected aborted journal
170[ 101.171900] EXT4-fs (sda): Remounting filesystem read-only
171sda
172[ 102.660635] EXT4-fs error (device sda): ext4_put_super:840: Couldn't clean up the journal
173root@VP88x_2017_3_PRJ0191:~#
174root@VP88x_2017_3_PRJ0191:~#
175root@VP88x_2017_3_PRJ0191:~#
176root@VP88x_2017_3_PRJ0191:~# mkfs.vfat /dev/sda
177root@VP88x_2017_3_PRJ0191:~# [ 117.462911] sda:
178
179root@VP88x_2017_3_PRJ0191:~#
180root@VP88x_2017_3_PRJ0191:~#
181root@VP88x_2017_3_PRJ0191:~# mount /dev/sda /mnt
182root@VP88x_2017_3_PRJ0191:~# vi /mnt/xxx
183root@VP88x_2017_3_PRJ0191:~# sync
184root@VP88x_2017_3_PRJ0191:~# Xilinx Zynq MP First Stage Boot Loader
185Release 2017.3 May 24 2018 - 10:35:53
186Marvell PHY reset
187SI5338 0x70 not configured
188SI5338 0x70 configuration finished
189SI5338 0x71 not configured
190SI5338 0x71 configuration finished
191
192
193U-Boot 2017.01 (Jul 26 2018 - 02:50:11 -0600) Xilinx ZynqMP ZCU102 revB
194
195I2C: ready
196DRAM: 2 GiB
197EL Level: EL2
198Chip ID: xczu3eg
199MMC: Card did not respond to voltage select!
200sdhci@ff160000 - probe failed: -95
201Card did not respond to voltage select!
202
203zynqmp_qspi_ofdata_to_platdata: CLK 300000000
204SF: Detected n25q1024 with page size 256 Bytes, erase size 64 KiB, total 128 MiB
205*** Warning - bad CRC, using default environment
206
207In: serial
208Out: serial
209Err: serial
210Bootmode: QSPI_MODE
211Net: ZYNQ GEM: ff0c0000, phyaddr c, interface rgmii-id
212eth0: ethernet@ff0c0000
213U-BOOT for VP88x_2017_3_PRJ0191
214
215Hit any key to stop autoboot: 0
216SF: Detected n25q1024 with page size 256 Bytes, erase size 64 KiB, total 128 MiB
217device 0 offset 0x540000, size 0x2200000
218SF: 35651584 bytes @ 0x540000 Read: OK
219## Loading kernel from FIT Image at 10000000 ...
220 Using 'conf@1' configuration
221 Trying 'kernel@0' kernel subimage
222 Description: Linux Kernel
223 Type: Kernel Image
224 Compression: uncompressed
225 Data Start: 0x100000d8
226 Data Size: 12503552 Bytes = 11.9 MiB
227 Architecture: AArch64
228 OS: Linux
229 Load Address: 0x00080000
230 Entry Point: 0x00080000
231 Hash algo: sha1
232 Hash value: 6738559f9c7602fa2a0ff36fdfc8cf5b9b3e6565
233 Verifying Hash Integrity ... sha1+ OK
234## Loading ramdisk from FIT Image at 10000000 ...
235 Using 'conf@1' configuration
236 Trying 'ramdisk@0' ramdisk subimage
237 Description: ramdisk
238 Type: RAMDisk Image
239 Compression: uncompressed
240 Data Start: 0x10bf54e4
241 Data Size: 8973721 Bytes = 8.6 MiB
242 Architecture: AArch64
243 OS: Linux
244 Load Address: unavailable
245 Entry Point: unavailable
246 Hash algo: sha1
247 Hash value: 4b595c4e0c42ac8967d3d732b389c6521f0b492f
248 Verifying Hash Integrity ... sha1+ OK
249## Loading fdt from FIT Image at 10000000 ...
250 Using 'conf@1' configuration
251 Trying 'fdt@0' fdt subimage
252 Description: Flattened Device Tree blob
253 Type: Flat Device Tree
254 Compression: uncompressed
255 Data Start: 0x10becbd0
256 Data Size: 34910 Bytes = 34.1 KiB
257 Architecture: AArch64
258 Hash algo: sha1
259 Hash value: 20fc450d3d82f1967aba254f93c3704b6f5d1f6e
260 Verifying Hash Integrity ... sha1+ OK
261 Booting using the fdt blob at 0x10becbd0
262 Loading Kernel Image ... OK
263 Loading Ramdisk to 07771000, end 07fffd99 ... OK
264 Loading Device Tree to 0000000007765000, end 000000000777085d ... OK
265
266Starting kernel ...
267
268[ 0.000000] Booting Linux on physical CPU 0x0
269[ 0.000000] Linux version 4.9.0 (user@user-VirtualBox) (gcc version 6.2.1 20161016 (Linaro GCC 6.2-2016.11) ) #1 SMP Thu Jul 26 01:50:46 MDT 2018
270[ 0.000000] Boot CPU: AArch64 Processor [410fd034]
271[ 0.000000] earlycon: cdns0 at MMIO 0x00000000ff010000 (options '115200n8')
272[ 0.000000] bootconsole [cdns0] enabled
273[ 0.000000] efi: Getting EFI parameters from FDT:
274[ 0.000000] efi: UEFI not found.
275[ 0.000000] cma: Reserved 512 MiB at 0x0000000060000000
276[ 0.000000] psci: probing for conduit method from DT.
277[ 0.000000] psci: PSCIv1.0 detected in firmware.
278[ 0.000000] psci: Using standard PSCI v0.2 function IDs
279[ 0.000000] psci: MIGRATE_INFO_TYPE not supported.
280[ 0.000000] percpu: Embedded 21 pages/cpu @ffffffc05ff76000 s46232 r8192 d31592 u86016
281[ 0.000000] Detected VIPT I-cache on CPU0
282[ 0.000000] CPU features: enabling workaround for ARM erratum 845719
283[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 517120
284[ 0.000000] Kernel command line: console=ttyPS0,115200 earlyprintk earlycon=cdns,mmio,0xFF010000,115200n8 uio_pdrv_genirq.of_id=generic-uio clk_ignore_unused cma=512M coherent_pool=64MiB
285[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
286[ 0.000000] Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes)
287[ 0.000000] Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes)
288[ 0.000000] Memory: 1519128K/2097152K available (8508K kernel code, 562K rwdata, 2636K rodata, 448K init, 382K bss, 53736K reserved, 524288K cma-reserved)
289[ 0.000000] Virtual kernel memory layout:
290[ 0.000000] modules : 0xffffff8000000000 - 0xffffff8008000000 ( 128 MB)
291[ 0.000000] vmalloc : 0xffffff8008000000 - 0xffffffbebfff0000 ( 250 GB)
292[ 0.000000] .text : 0xffffff8008080000 - 0xffffff80088d0000 ( 8512 KB)
293[ 0.000000] .rodata : 0xffffff80088d0000 - 0xffffff8008b70000 ( 2688 KB)
294[ 0.000000] .init : 0xffffff8008b70000 - 0xffffff8008be0000 ( 448 KB)
295[ 0.000000] .data : 0xffffff8008be0000 - 0xffffff8008c6ca00 ( 563 KB)
296[ 0.000000] .bss : 0xffffff8008c6ca00 - 0xffffff8008ccc434 ( 383 KB)
297[ 0.000000] fixed : 0xffffffbefe7fd000 - 0xffffffbefec00000 ( 4108 KB)
298[ 0.000000] PCI I/O : 0xffffffbefee00000 - 0xffffffbeffe00000 ( 16 MB)
299[ 0.000000] vmemmap : 0xffffffbf00000000 - 0xffffffc000000000 ( 4 GB maximum)
300[ 0.000000] 0xffffffbf00000000 - 0xffffffbf01c00000 ( 28 MB actual)
301[ 0.000000] memory : 0xffffffc000000000 - 0xffffffc080000000 ( 2048 MB)
302[ 0.000000] Hierarchical RCU implementation.
303[ 0.000000] Build-time adjustment of leaf fanout to 64.
304[ 0.000000] RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=4.
305[ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=64, nr_cpu_ids=4
306[ 0.000000] NR_IRQS:64 nr_irqs:64 0
307[ 0.000000] GIC: Adjusting CPU interface base to 0x00000000f902f000
308[ 0.000000] GIC: Using split EOI/Deactivate mode
309[ 0.000000] arm_arch_timer: Architected cp15 timer(s) running at 50.00MHz (phys).
310[ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0xb8812736b, max_idle_ns: 440795202655 ns
311[ 0.000003] sched_clock: 56 bits at 50MHz, resolution 20ns, wraps every 4398046511100ns
312[ 0.008257] Console: colour dummy device 80x25
313[ 0.012527] Calibrating delay loop (skipped), value calculated using timer frequency.. 100.00 BogoMIPS (lpj=200000)
314[ 0.022886] pid_max: default: 32768 minimum: 301
315[ 0.027579] Mount-cache hash table entries: 4096 (order: 3, 32768 bytes)
316[ 0.034137] Mountpoint-cache hash table entries: 4096 (order: 3, 32768 bytes)
317[ 0.041862] ASID allocator initialised with 65536 entries
318[ 0.047562] zynqmp_plat_init Power management API v0.3
319[ 0.052576] EFI services will not be available.
320[ 0.057342] Detected VIPT I-cache on CPU1
321[ 0.057378] CPU1: Booted secondary processor [410fd034]
322[ 0.057639] Detected VIPT I-cache on CPU2
323[ 0.057655] CPU2: Booted secondary processor [410fd034]
324[ 0.057906] Detected VIPT I-cache on CPU3
325[ 0.057922] CPU3: Booted secondary processor [410fd034]
326[ 0.057954] Brought up 4 CPUs
327[ 0.088237] SMP: Total of 4 processors activated.
328[ 0.092913] CPU features: detected feature: 32-bit EL0 Support
329[ 0.098709] CPU: All CPU(s) started at EL2
330[ 0.102782] alternatives: patching kernel code
331[ 0.108041] devtmpfs: initialized
332[ 0.115580] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
333[ 0.136569] xor: measuring software checksum speed
334[ 0.181237] 8regs : 2543.000 MB/sec
335[ 0.221262] 8regs_prefetch: 2266.000 MB/sec
336[ 0.265629] 32regs : 3125.000 MB/sec
337[ 0.305657] 32regs_prefetch: 2627.000 MB/sec
338[ 0.310078] xor: using function: 32regs (3125.000 MB/sec)
339[ 0.315530] pinctrl core: initialized pinctrl subsystem
340[ 0.321212] NET: Registered protocol family 16
341[ 0.326344] Failed to initialise IOMMU /amba/smmu@fd800000
342[ 0.331844] vdso: 2 pages (1 code @ ffffff80088d7000, 1 data @ ffffff8008be4000)
343[ 0.339048] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers.
344[ 0.374401] DMA: preallocated 65536 KiB pool for atomic allocations
345[ 0.390743] reset_zynqmp reset-controller: Xilinx zynqmp reset driver probed
346[ 0.398217] ARM CCI_400_r1 PMU driver probed[ 0.404998] zynqmp-pinctrl ff180000.pinctrl: zynqmp pinctrl initialized
347[ 0.431711] HugeTLB registered 2 MB page size, pre-allocated 0 pages
348[ 0.504820] raid6: int64x1 gen() 447 MB/s
349[ 0.576873] raid6: int64x1 xor() 485 MB/s
350[ 0.648969] raid6: int64x2 gen() 741 MB/s
351[ 0.720964] raid6: int64x2 xor() 661 MB/s
352[ 0.793014] raid6: int64x4 gen() 1086 MB/s
353[ 0.865040] raid6: int64x4 xor() 816 MB/s
354[ 0.937076] raid6: int64x8 gen() 1265 MB/s
355[ 1.009113] raid6: int64x8 xor() 824 MB/s
356[ 1.081217] raid6: neonx1 gen() 797 MB/s
357[ 1.153196] raid6: neonx1 xor() 837 MB/s
358[ 1.225264] raid6: neonx2 gen() 1286 MB/s
359[ 1.297300] raid6: neonx2 xor() 1143 MB/s
360[ 1.369331] raid6: neonx4 gen() 1663 MB/s
361[ 1.441368] raid6: neonx4 xor() 1306 MB/s
362[ 1.513436] raid6: neonx8 gen() 1752 MB/s
363[ 1.585448] raid6: neonx8 xor() 1348 MB/s
364[ 1.589525] raid6: using algorithm neonx8 gen() 1752 MB/s
365[ 1.594887] raid6: .... xor() 1348 MB/s, rmw enabled
366[ 1.599818] raid6: using intx1 recovery algorithm
367[ 1.604981] Write failed gate address:1000f02
368[ 1.612937] SCSI subsystem initialized
369[ 1.616718] usbcore: registered new interface driver usbfs
370[ 1.622040] usbcore: registered new interface driver hub
371[ 1.627329] usbcore: registered new device driver usb
372[ 1.632368] media: Linux media interface: v0.10
373[ 1.636820] Linux video capture interface: v2.00
374[ 1.641408] pps_core: LinuxPPS API ver. 1 registered
375[ 1.646313] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
376[ 1.655406] PTP clock support registered
377[ 1.659305] EDAC MC: Ver: 3.0.0
378[ 1.662665] FPGA manager framework
379[ 1.666005] fpga-region fpga-full: FPGA Region probed
380[ 1.671059] Advanced Linux Sound Architecture Driver Initialized.
381[ 1.677267] Bluetooth: Core ver 2.22
382[ 1.680676] NET: Registered protocol family 31
383[ 1.685066] Bluetooth: HCI device and connection manager initialized
384[ 1.691384] Bluetooth: HCI socket layer initialized
385[ 1.696226] Bluetooth: L2CAP socket layer initialized
386[ 1.701251] Bluetooth: SCO socket layer initialized
387[ 1.706666] clocksource: Switched to clocksource arch_sys_counter
388[ 1.712684] VFS: Disk quotas dquot_6.6.0
389[ 1.716501] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
390[ 1.727921] NET: Registered protocol family 2
391[ 1.732464] TCP established hash table entries: 16384 (order: 5, 131072 bytes)
392[ 1.739580] TCP bind hash table entries: 16384 (order: 6, 262144 bytes)
393[ 1.746358] TCP: Hash tables configured (established 16384 bind 16384)
394[ 1.752749] UDP hash table entries: 1024 (order: 3, 32768 bytes)
395[ 1.758688] UDP-Lite hash table entries: 1024 (order: 3, 32768 bytes)
396[ 1.765192] NET: Registered protocol family 1
397[ 1.769699] RPC: Registered named UNIX socket transport module.
398[ 1.775481] RPC: Registered udp transport module.
399[ 1.780095] RPC: Registered tcp transport module.
400[ 1.784766] RPC: Registered tcp NFSv4.1 backchannel transport module.
401[ 1.791309] Trying to unpack rootfs image as initramfs...
402[ 2.114291] Freeing initrd memory: 8760K (ffffffc007771000 - ffffffc007fff000)
403[ 2.121720] hw perfevents: enabled with armv8_pmuv3 PMU driver, 7 counters available
404[ 2.129943] futex hash table entries: 1024 (order: 5, 131072 bytes)
405[ 2.136585] workingset: timestamp_bits=62 max_order=19 bucket_order=0
406[ 2.143509] NFS: Registering the id_resolver key type
407[ 2.148389] Key type id_resolver registered
408[ 2.152520] Key type id_legacy registered
409[ 2.156504] nfs4filelayout_init: NFSv4 File Layout Driver Registering...
410[ 2.163175] ntfs: driver 2.1.32 [Flags: R/W].
411[ 2.167503] jffs2: version 2.2. (NAND) (SUMMARY) © 2001-2006 Red Hat, Inc.
412[ 2.182316] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 247)
413[ 2.189553] io scheduler noop registered
414[ 2.193410] io scheduler deadline registered
415[ 2.197653] io scheduler cfq registered (default)
416[ 2.202922] nwl-pcie fd0e0000.pcie: Link is UP
417[ 2.207218] OF: PCI: host bridge /amba/pcie@fd0e0000 ranges:
418[ 2.212820] OF: PCI: MEM 0xe0000000..0xefffffff -> 0xe0000000
419[ 2.218687] OF: PCI: MEM 0x600000000..0x7ffffffff -> 0x600000000
420[ 2.224912] nwl-pcie fd0e0000.pcie: PCI host bridge to bus 0000:00
421[ 2.230973] pci_bus 0000:00: root bus resource [bus 00-ff]
422[ 2.236419] pci_bus 0000:00: root bus resource [mem 0xe0000000-0xefffffff]
423[ 2.243256] pci_bus 0000:00: root bus resource [mem 0x600000000-0x7ffffffff pref]
424[ 2.251182] pci 0000:00:00.0: BAR 8: assigned [mem 0xe0000000-0xe00fffff]
425[ 2.257779] pci 0000:01:00.0: BAR 0: assigned [mem 0xe0000000-0xe00007ff]
426[ 2.264528] pci 0000:00:00.0: PCI bridge to [bus 01-0c]
427[ 2.269714] pci 0000:00:00.0: bridge window [mem 0xe0000000-0xe00fffff]
428[ 2.277178] xilinx-dpdma fd4c0000.dma: Xilinx DPDMA engine is probed
429[ 2.283552] xilinx-vdma 400000000.dma: Xilinx AXI VDMA Engine Driver Probed!!
430[ 2.290604] xilinx-vdma 400010000.dma: Xilinx AXI VDMA Engine Driver Probed!!
431[ 2.297758] xilinx-zynqmp-dma fd500000.dma: ZynqMP DMA driver Probe success
432[ 2.304617] xilinx-zynqmp-dma fd510000.dma: ZynqMP DMA driver Probe success
433[ 2.311535] xilinx-zynqmp-dma fd520000.dma: ZynqMP DMA driver Probe success
434[ 2.318459] xilinx-zynqmp-dma fd530000.dma: ZynqMP DMA driver Probe success
435[ 2.325380] xilinx-zynqmp-dma fd540000.dma: ZynqMP DMA driver Probe success
436[ 2.332297] xilinx-zynqmp-dma fd550000.dma: ZynqMP DMA driver Probe success
437[ 2.339220] xilinx-zynqmp-dma fd560000.dma: ZynqMP DMA driver Probe success
438[ 2.346138] xilinx-zynqmp-dma fd570000.dma: ZynqMP DMA driver Probe success
439[ 2.353096] xilinx-zynqmp-dma ffa80000.dma: ZynqMP DMA driver Probe success
440[ 2.359981] xilinx-zynqmp-dma ffa90000.dma: ZynqMP DMA driver Probe success
441[ 2.366897] xilinx-zynqmp-dma ffaa0000.dma: ZynqMP DMA driver Probe success
442[ 2.373819] xilinx-zynqmp-dma ffab0000.dma: ZynqMP DMA driver Probe success
443[ 2.380739] xilinx-zynqmp-dma ffac0000.dma: ZynqMP DMA driver Probe success
444[ 2.387660] xilinx-zynqmp-dma ffad0000.dma: ZynqMP DMA driver Probe success
445[ 2.394578] xilinx-zynqmp-dma ffae0000.dma: ZynqMP DMA driver Probe success
446[ 2.401501] xilinx-zynqmp-dma ffaf0000.dma: ZynqMP DMA driver Probe success
447[ 2.429741] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
448[ 2.437219] ff000000.serial: ttyPS1 at MMIO 0xff000000 (irq = 46, base_baud = 6250000) is a xuartps
449[ 2.446299] ff010000.serial: ttyPS0 at MMIO 0xff010000 (irq = 47, base_baud =·r¢ªª¢²êconsole [ttyPS0] enabled
450[ 2.455246] console [ttyPS0] enabled
451[ 2.462210] bootconsole [cdns0] disabled
452[ 2.462210] bootconsole [cdns0] disabled
453[ 2.470280] Unable to detect cache hierarchy from DT for CPU 0
454[ 2.480634] brd: module loaded
455[ 2.486419] loop: module loaded
456[ 2.490385] ahci-ceva fd0c0000.ahci: AHCI 0001.0301 32 slots 2 ports 6 Gbps 0x3 impl platform mode
457[ 2.499263] ahci-ceva fd0c0000.ahci: flags: 64bit ncq sntf pm clo only pmp fbs pio slum part ccc sds apst
458[ 2.509995] scsi host0: ahci-ceva
459[ 2.513409] scsi host1: ahci-ceva
460[ 2.516748] ata1: SATA max UDMA/133 mmio [mem 0xfd0c0000-0xfd0c1fff] port 0x100 irq 43
461[ 2.524576] ata2: SATA max UDMA/133 mmio [mem 0xfd0c0000-0xfd0c1fff] port 0x180 irq 43
462[ 2.532620] mtdoops: mtd device (mtddev=name/number) must be supplied
463[ 2.539975] zynqmp-qspi ff0f0000.spi: rx bus width not found
464[ 2.545908] m25p80 spi0.0: found n25q00, expected n25q512a
465[ 2.551632] m25p80 spi0.0: n25q00 (131072 Kbytes)
466[ 2.556271] 5 ofpart partitions found on MTD device spi0.0
467[ 2.561716] Creating 5 MTD partitions on "spi0.0":
468[ 2.566492] 0x000000000000-0x000000500000 : "boot"
469[ 2.571735] 0x000000500000-0x000000540000 : "bootenv"
470[ 2.577122] 0x000000540000-0x000002740000 : "kernel"
471[ 2.582402] 0x000002740000-0x000003740000 : "user"
472[ 2.587510] 0x000003740000-0x000003750000 : "test"
473[ 2.593504] libphy: Fixed MDIO Bus: probed
474[ 2.598633] tun: Universal TUN/TAP device driver, 1.6
475[ 2.603600] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
476[ 2.609871] CAN device driver interface
477[ 2.614190] macb ff0c0000.ethernet: Not enabling partial store and forward
478[ 2.621484] libphy: MACB_mii_bus: probed
479[ 2.698939] macb ff0c0000.ethernet eth0: Cadence GEM rev 0x50070106 at 0xff0c0000 irq 30 (00:0a:35:00:22:01)
480[ 2.708683] Marvell 88E1510 ff0c0000.etherne:00: attached PHY driver [Marvell 88E1510] (mii_bus:phy_addr=ff0c0000.etherne:00, irq=-1)
481[ 2.721274] usbcore: registered new interface driver asix
482[ 2.726640] usbcore: registered new interface driver ax88179_178a
483[ 2.732685] usbcore: registered new interface driver cdc_ether
484[ 2.738500] usbcore: registered new interface driver net1080
485[ 2.744142] usbcore: registered new interface driver cdc_subset
486[ 2.750043] usbcore: registered new interface driver zaurus
487[ 2.755612] usbcore: registered new interface driver cdc_ncm
488[ 2.761568] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
489[ 2.768007] ehci-pci: EHCI PCI platform driver
490[ 2.772663] usbcore: registered new interface driver uas
491[ 2.777927] usbcore: registered new interface driver usb-storage
492[ 2.784181] mousedev: PS/2 mouse device common for all mice
493[ 2.790074] rtc_zynqmp ffa60000.rtc: rtc core: registered ffa60000.rtc as rtc0
494[ 2.797246] i2c /dev entries driver
495[ 2.800875] cdns-i2c ff020000.i2c: 400 kHz mmio ff020000 irq 32
496[ 2.806922] cdns-i2c ff030000.i2c: 400 kHz mmio ff030000 irq 33
497[ 2.813688] usbcore: registered new interface driver uvcvideo
498[ 2.819350] USB Video Class driver (1.1.1)
499[ 2.823789] Bluetooth: HCI UART driver ver 2.3
500[ 2.828154] Bluetooth: HCI UART protocol H4 registered
501[ 2.833270] Bluetooth: HCI UART protocol BCSP registered
502[ 2.838565] Bluetooth: HCI UART protocol LL registered
503[ 2.843685] Bluetooth: HCI UART protocol ATH3K registered
504[ 2.849067] Bluetooth: HCI UART protocol Three-wire (H5) registered
505[ 2.852871] ata2: SATA link down (SStatus 0 SControl 330)
506[ 2.860734] Bluetooth: HCI UART protocol Intel registered
507[ 2.866115] Bluetooth: HCI UART protocol Broadcom registered
508[ 2.871723] Bluetooth: HCI UART protocol QCA registered
509[ 2.876962] usbcore: registered new interface driver bcm203x
510[ 2.882606] usbcore: registered new interface driver bpa10x
511[ 2.888159] usbcore: registered new interface driver bfusb
512[ 2.893627] usbcore: registered new interface driver btusb
513[ 2.899065] Bluetooth: Generic Bluetooth SDIO driver ver 0.1
514[ 2.904758] usbcore: registered new interface driver ath3k
515[ 2.910298] EDAC MC: ECC not enabled
516[ 2.913923] EDAC DEVICE0: Giving out device to module edac controller cache_err: DEV edac (POLLED)
517[ 2.922959] EDAC DEVICE1: Giving out device to module zynqmp-ocm-edac controller zynqmp_ocm: DEV ff960000.memory-controller (INTERRUPT)
518[ 2.935256] sdhci: Secure Digital Host Controller Interface driver
519[ 2.941353] sdhci: Copyright(c) Pierre Ossman
520[ 2.945692] sdhci-pltfm: SDHCI platform and OF driver helper
521[ 2.998677] mmc0: SDHCI controller on ff160000.sdhci [ff160000.sdhci] using ADMA 64-bit
522[ 3.006786] ledtrig-cpu: registered to indicate activity on CPUs
523[ 3.012855] usbcore: registered new interface driver usbhid
524[ 3.018338] usbhid: USB HID core driver
525[ 3.023725] fpga_manager fpga0: Xilinx ZynqMP FPGA Manager registered
526[ 3.030582] xilinx-dp-snd-pcm dp_snd_pcm0: Xilinx DisplayPort Sound PCM probed
527[ 3.037752] xilinx-dp-snd-pcm dp_snd_pcm1: Xilinx DisplayPort Sound PCM probed
528[ 3.045101] PLL: shutdown
529[ 3.048525] Write failed to divider address:fd1a007c
530[ 3.053561] PLL: enable
531[ 3.056088] xilinx-dp-snd-codec dp_snd_codec0: Xilinx DisplayPort Sound Codec probed
532[ 3.064108] xilinx-dp-snd-card dp_snd_card: xilinx-dp-snd-codec-dai <-> xilinx-dp-snd-codec-dai mapping ok
533[ 3.073779] xilinx-dp-snd-card dp_snd_card: xilinx-dp-snd-codec-dai <-> xilinx-dp-snd-codec-dai mapping ok
534[ 3.083635] xilinx-dp-snd-card dp_snd_card: Xilinx DisplayPort Sound Card probed
535[ 3.091075] pktgen: Packet Generator for packet performance testing. Version: 2.75
536[ 3.101547] Netfilter messages via NETLINK v0.30.
537[ 3.106284] ip_tables: (C) 2000-2006 Netfilter Core Team
538[ 3.111561] Initializing XFRM netlink socket
539[ 3.116809] NET: Registered protocol family 10
540[ 3.121640] ip6_tables: (C) 2000-2006 Netfilter Core Team
541[ 3.126995] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver
542[ 3.133211] NET: Registered protocol family 17
543[ 3.137578] NET: Registered protocol family 15
544[ 3.142003] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this.
545[ 3.154927] Ebtables v2.0 registered
546[ 3.158539] can: controller area network core (rev 20120528 abi 9)
547[ 3.164683] NET: Registered protocol family 29
548[ 3.169074] can: raw protocol (rev 20120528)
549[ 3.173325] can: broadcast manager protocol (rev 20161123 t)
550[ 3.178970] can: netlink gateway (rev 20130117) max_hops=1
551[ 3.184936] Bluetooth: RFCOMM TTY layer initialized
552[ 3.189729] Bluetooth: RFCOMM socket layer initialized
553[ 3.194852] Bluetooth: RFCOMM ver 1.11
554[ 3.198574] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
555[ 3.203872] Bluetooth: BNEP filters: protocol multicast
556[ 3.209082] Bluetooth: BNEP socket layer initialized
557[ 3.214026] Bluetooth: HIDP (Human Interface Emulation) ver 1.2
558[ 3.219931] Bluetooth: HIDP socket layer initialized
559[ 3.225056] 9pnet: Installing 9P2000 support
560[ 3.229261] Key type dns_resolver registered
561[ 3.233917] registered taskstats version 1
562[ 3.238309] Btrfs loaded, crc32c=crc32c-generic
563[ 3.249905] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller
564[ 3.255328] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 1
565[ 3.263198] xhci-hcd xhci-hcd.0.auto: hcc params 0x0238f625 hci version 0x100 quirks 0x02010010
566[ 3.271852] xhci-hcd xhci-hcd.0.auto: irq 229, io mem 0xfe300000
567[ 3.277923] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
568[ 3.284629] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
569[ 3.291828] usb usb1: Product: xHCI Host Controller
570[ 3.296686] usb usb1: Manufacturer: Linux 4.9.0 xhci-hcd
571[ 3.301980] usb usb1: SerialNumber: xhci-hcd.0.auto
572[ 3.307145] hub 1-0:1.0: USB hub found
573[ 3.310828] hub 1-0:1.0: 1 port detected
574[ 3.314827] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller
575[ 3.320233] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 2
576[ 3.327901] usb usb2: We don't know the algorithms for LPM for this host, disabling LPM.
577[ 3.336004] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003
578[ 3.342710] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
579[ 3.349912] usb usb2: Product: xHCI Host Controller
580[ 3.354772] usb usb2: Manufacturer: Linux 4.9.0 xhci-hcd
581[ 3.360067] usb usb2: SerialNumber: xhci-hcd.0.auto
582[ 3.365138] hub 2-0:1.0: USB hub found
583[ 3.368814] hub 2-0:1.0: 1 port detected
584[ 3.373093] rtc_zynqmp ffa60000.rtc: setting system clock to 1970-01-01 00:00:15 UTC (15)
585[ 3.381298] clk: Not disabling unused clocks
586[ 3.385486] ALSA device list:
587[ 3.388434] #0: DisplayPort monitor
588[ 4.658687] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 330)
589[ 4.687955] ata1.00: ATA-8: ST9250315AS, 0002SDM1, max UDMA/133
590[ 4.693789] ata1.00: 488397168 sectors, multi 16: LBA48 NCQ (depth 31/32)
591[ 4.729261] ata1.00: configured for UDMA/133
592[ 4.733726] scsi 0:0:0:0: Direct-Access ATA ST9250315AS SDM1 PQ: 0 ANSI: 5
593[ 4.775040] sd 0:0:0:0: [sda] 488397168 512-byte logical blocks: (250 GB/233 GiB)
594[ 4.782534] sd 0:0:0:0: [sda] Write Protect is off
595[ 4.787287] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
596[ 4.946053] sda: sda1
597[ 4.948837] sd 0:0:0:0: [sda] Attached SCSI disk
598[ 4.953561] Freeing unused kernel memory: 448K (ffffffc000b70000 - ffffffc000be0000)
599INIT: version 2.88 booting
600Starting udev
601[ 5.068836] udevd[1623]: starting version 3.2
602[ 5.073460] random: udevd: uninitialized urandom read (16 bytes read)
603[ 5.080037] random: udevd: uninitialized urandom read (16 bytes read)
604[ 5.086451] random: udevd: uninitialized urandom read (16 bytes read)
605[ 5.092847] random: udevd: uninitialized urandom read (16 bytes read)
606[ 5.102888] udevd[1624]: starting eudev-3.2
607[ 5.146147] random: udevd: uninitialized urandom read (16 bytes read)
608[ 5.156006] random: udevd: uninitialized urandom read (16 bytes read)
609[ 5.165665] 4fm: loading out-of-tree module taints kernel.
610[ 5.175394] pci 0000:00:00.0: enabling device (0000 -> 0002)
611[ 5.181089] 4FM 0000:01:00.0: enabling device (0000 -> 0002)
612[ 5.186717] Accessing 47232 of total 1 entries in dev->bar
613[ 5.192195] dev->bar[u].virt_address:cf3d07c value:38011121
614[ 5.193360] <dma1> init: registered
615[ 5.201195] dev->bar[u].virt_address:cf3d080 value:deadbeef
616[ 5.206726] dev->bar[u].virt_address:cf3d084 value:baadf00d
617[ 5.212291] dev->bar[u].virt_address:cf3d088 value:eba00eba
618[ 5.217846] dev->bar[u].virt_address:cf3d08c value:beefdeaf
619[ 5.229665] <dma2> init: registered
620[ 5.239185] /media/yocto4/vp880/VP88x_2017_3_PRJ0191/build/tmp/work/plnx_aarch64-xilinx-linux/4fm/1.0-r0/4fm.c: found 1 devices
621Populating dev cache
622[ 5.906872] random: dd: uninitialized urandom read (512 bytes read)
623Thu Jul 26 08:51:43 UTC 2018
624Starting internet superserver: inetd.
625Running postinst /etc/rpm-postinsts/100-sysvinit-inittab...
626update-rc.d: /etc/init.d/run-postinsts exists during rc.d purge (continuing)
627INIT: Entering runlevel: 5
628Hello World
629[22]:0x12
630[20]:0x201
631[20]:0x201
632[22]:0x1
633[0]:0x140
634[0]:0x140
635Configuring network interfaces... [ 6.205172] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
636done.
637Starting Dropbear SSH server: [ 6.233858] random: dropbearkey: uninitialized urandom read (32 bytes read)
638[ 6.243920] random: dropbearkey: uninitialized urandom read (32 bytes read)
639Generating key, this may take a while...
640[ 7.218783] macb ff0c0000.ethernet eth0: link up (1000/Full)
641[ 7.224389] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
642[ 15.776876] random: dropbearkey: uninitialized urandom read (32 bytes read)
643Public key portion is:
644ssh-rsa AAAAB3NzaC1yc2EAAAADAQABAAABAQCx0xQijgYgMJX7gep1syG+VgOkT386ruyJttgLOIyUHbCP1GM+Ppz7mFU8Prtb/CIS77XEPbGUsJ6VtXvUWJ8oaRbfKSANsQjMUv0mlcvEClw9dGI44jGisIU8QMXin+IIq9BHpOyQyy/bfMgbGElT9c/ltzks3ma7p2X0NVcibhAC3pplS8AWH6HGeq3fmxPN3JswxicCxumb/mNSpQDIgmn2TeCCNuJqiIBlI8nnqxAujNgaAnmbVJTGOYrZLf7TBqfAWwzIgjXI4kmdfjp0sOHVRZH5BoNPH5rKg8GZN2zZYY5iQJf6O/lPBX4PVrcihjGKDxelq8h6AV326XhH root@VP88x_2017_3_PRJ0191
645Fingerprint: md5 fc:b5:9d:05:30:d4:9e:f5:59:89:2a:c8:fa:a[ 15.829320] random: fast init done
6465:44:e0
647dropbear.
648Starting syslogd/klogd: done
649[ 16.183320] random: crng init done
650[ 18.100550] jffs2: notice: (2136) jffs2_build_xattr_subsystem: complete building xattr subsystem, 0 of xdatum (0 unchecked, 0 orphan) and 0 of xref (0 dead, 0 orphan) found.
651hello world.....
652Starting tcf-agent: OK
653
654root@VP88x_2017_3_PRJ0191:~# mount
655rootfs on / type rootfs (rw,size=759564k,nr_inodes=189891)
656proc on /proc type proc (rw,relatime)
657sysfs on /sys type sysfs (rw,relatime)
658debugfs on /sys/kernel/debug type debugfs (rw,relatime)
659devtmpfs on /dev type devtmpfs (rw,relatime,size=759564k,nr_inodes=189891,mode=755)
660tmpfs on /run type tmpfs (rw,nosuid,nodev,mode=755)
661tmpfs on /var/volatile type tmpfs (rw,relatime)
662devpts on /dev/pts type devpts (rw,relatime,gid=5,mode=620,ptmxmode=000)
663/dev/mtdblock3 on /mnt type jffs2 (rw,relatime)
664root@VP88x_2017_3_PRJ0191:~# mount /dev/sda
665sda sda1
666root@VP88x_2017_3_PRJ0191:~# mount /dev/sda
667sda sda1
668root@VP88x_2017_3_PRJ0191:~# mount /dev/sda /mnt2
669mount: mounting /dev/sda on /mnt2 failed: No such file or directory
670root@VP88x_2017_3_PRJ0191:~# mkdir /mnt2
671root@VP88x_2017_3_PRJ0191:~# mount /dev/sda /mnt2
672[ 43.742405] FAT-fs (sda): Volume was not properly unmounted. Some data may be corrupt. Please run fsck.
673root@VP88x_2017_3_PRJ0191:~# ls /mnt2
674xxx
675root@VP88x_2017_3_PRJ0191:~# cat /mnt2/xxx
676sdfsdsdf`:wq
677
678root@VP88x_2017_3_PRJ0191:~# umount /dev/sda
679root@VP88x_2017_3_PRJ0191:~# fsck /dev/sda
680sda sda1
681root@VP88x_2017_3_PRJ0191:~# fsck /dev/sda
682sda sda1
683root@VP88x_2017_3_PRJ0191:~# fsck /dev/sda1
684fsck (busybox 1.24.1, 2018-05-24 10:33:04 MDT)
685fsck: fsck.auto: No such file or directory
686root@VP88x_2017_3_PRJ0191:~#
687root@VP88x_2017_3_PRJ0191:~#
688root@VP88x_2017_3_PRJ0191:~#
689root@VP88x_2017_3_PRJ0191:~# chmod +x /tmp/*
690root@VP88x_2017_3_PRJ0191:~# cd /tmp
691root@VP88x_2017_3_PRJ0191:/tmp# ./diagnostic.elf
692enter number of cyclic (0 - for infinite)
6931
694SPI1 result = 0 SUCCESS
695Opened device VP880. PCIe read from CID 0x2000: 2f70013
696PCIe result = 0 SUCCESS
697
698--- AMS zynq PS System monitor---
699temperature ps 50.52C
700vcc_psintlp 0.87V
701vcc_psintfp 0.87V
702vcc_psaux 1.81V
703vcc_psddr_504 1.21V
704vcc_psio3_503 3.25V
705vcc_psio0_500 3.24V
706vcc_psio1_501 1.80V
707vcc_psio2_502 1.80V
708vcc_psmgtravcc 0.87V
709vcc_psmgtravtt 1.81V
710---------------------------------
711
712--- AMS zynq PL System monitor---
713temperature pl 48.54C
714vcc_int 0.87V
715vcc_aux 1.81V
716vcc_bram 0.87V
717vcc_psintlp 0.87V
718vcc_psintfp 0.87V
719vcc_psaux 1.81V
720vcc_vuser1 0.00V
721vcc_vuser2 0.00V
722vcc_vuser3 0.00V
723vcc_vuser4 0.00V
724---------------------------------
725ranran.............temperature 27 C
726vmon_fmc_vadj 1.79V
727vmon_fmc_viob 1.79V
728vmon_sblast_vcore 1.64V
729vmon_sblast_vio 1.48V
730vmon_2v5_mgt_refclk 2.44V
731vmon_3v3_mgt_refclk 3.23V
732vmon_1v2 1.18V
733vmon_1v4 1.40V
734vmon_vaux 3.32V
735VPX_SYS_RST_N :1
736PS_ERROR_STATUS :1
737PS_ERROR_OUT :1
738PS_INIT_B :1
739PS_DONE :1
740INIT_B :1
741DONE :1
742FLASH_A26 :1
743HSC_12V_PG :1
744HSC_5V_PG :1
745VPX_GAP :1
746VPX_GA4 :1
747VPX_GA3 :1
748VPX_GA2 :1
749VPX_GA1 :1
750VPX_GA0 :1
751PG_LED_N :1
752ZYNQ_CONFDONE_LED :1
753FPGA_CONFDONE_LED :1
754FMC_VADJ_VS0 :1
755FMC_VADJ_VS1 :1
756FMC_VADJ_VS2 :1
757VADJ_FMC_EN_L :1
758FMC_BYPASS :1
759HSC_ON :1
760HSC_3V3_PG :1
761PG_C2M_3V3 :1
762MGT_PG :1
763DDR4_VTT_PG :1
764DDR4_PG :1
765PG_FPGA_CORE :1
7661V8_LOC_2V5_VPP_PG :1
767HSC Source channel 1 3.250V
768HSC Source channel 2 5.031V
769HSC ADIN channel 1 0.425V
770HSC ADIN channel 2 0.423V
771HSC Sense channel 1 14.688mV
772HSC Current channel 1 2.938A
773HSC Sense channel 2 2.625mV
774HSC Current channel 2 0.875A
775HSC Power channel 1 9.547W
776HSC Power channel 2 4.402W
777---------------------------------------------------
778HSC Source channel 1 2.500V
779HSC Source channel 2 11.906V
780HSC ADIN channel 1 0.423V
781HSC ADIN channel 2 0.421V
782HSC Sense channel 1 0.000mV
783HSC Current channel 1 0.000A
784HSC Sense channel 2 4.375mV
785HSC Current channel 2 0.875A
786HSC Power channel 1 0.000W
787HSC Power channel 2 10.418W
788---------------------------------------------------
789HOSTIF version 1.0.0.5
790read fpga values
791temp_pl 44.919250
792vcc_int 0.958008
793vcc_aux 1.801758
794vcc_bram 0.958008
795vcc_vuser0 1.500000
796vcc_vuser1 1.186523
797vcc_vuser2 0.000000
798vcc_vuser3 0.000000
799MMC result =SUCCESS
800PING 192.168.1.20 (192.168.1.20): 56 data bytes
801
802--- 192.168.1.20 ping statistics ---
8031 packets transmitted, 0 packets received, 100% packet loss
804Ethernet result = 256 FAILED
805UnitAPI version : 1.3.8 : Enumerating units in the system, please wait...
806
807Global Units:
808Global Unit 0 is on Device 'VP880' (P0): Internal Unit 0 is star 0x01C4 (axi_vp880_8l_host_if) with index 1 of star type 0x000D (Host Interface)
809Global Unit 1 is on Device 'VP880' (P0): Internal Unit 1 is star 0x0203 (Unknown) with index 0 of star type 0x0005 (ADC)
810Global Unit 2 is on Device 'VP880' (P0): Internal Unit 2 is star 0x015C (axi_intrc16) with index 0 of star type 0x0014 (Interrupt Controller)
811Global Unit 3 is on Device 'VP880' (P0): Internal Unit 3 is star 0x014C (axi_i2c_master) with index 0 of star type 0x000E (3rd Party Logic)
812Global Unit 4 is on Device 'VP880' (P0): Internal Unit 4 is star 0x0202 (Unknown) with index 0 of star type 0x0003 (Memory FIFO)
813Global Unit 5 is on Device 'VP880' (P0): Internal Unit 5 is star 0x01C5 (axi_vp880_ddr4_fifo) with index 0 of star type 0x0003 (Memory FIFO)
814
815
816Running 'VP880-FMC134' on PCIe, CID725
817
818-----------------------------------------------------------
819Device 'VP880' (P0)
820-----------------------------------------------------------
821Constellation ID : 759
822Number Of Stars : 19
823Software Build Code: 1524177589 (Thu Apr 19 22:39:49 2018)
824Firmware Build Code: 0
825Firmware Revision : 1.2
826-----------------------------------------------------------
827
828FMC detected
829FMC result = 0 SUCCESS
830memory test: OK
831Memory result = 0 SUCCESS
832DISK: failed , no mount point
833DISK result = -1 FAILED
834FLASH: OK
835FLASH result = 0 SUCCESS
836read returned 9
837RFFE result = 0 SUCCESS
838root@VP88x_2017_3_PRJ0191:/tmp# mount
839rootfs on / type rootfs (rw,size=759564k,nr_inodes=189891)
840proc on /proc type proc (rw,relatime)
841sysfs on /sys type sysfs (rw,relatime)
842debugfs on /sys/kernel/debug type debugfs (rw,relatime)
843devtmpfs on /dev type devtmpfs (rw,relatime,size=759564k,nr_inodes=189891,mode=755)
844tmpfs on /run type tmpfs (rw,nosuid,nodev,mode=755)
845tmpfs on /var/volatile type tmpfs (rw,relatime)
846devpts on /dev/pts type devpts (rw,relatime,gid=5,mode=620,ptmxmode=000)
847/dev/mtdblock3 on /mnt type jffs2 (rw,relatime)
848root@VP88x_2017_3_PRJ0191:/tmp# reboot
849
850The system is going down for reboot NOW!_PRJ0191 (ttyPS0) (Thu Jul 26 á:57:1
851INIT: Sending processes the TERM signal
852root@VP88x_2017_3_PRJ0191:/tmp# Stopping Dropbear SSH server: stopped /usr/sbin/dropbear (pid 2123)
853dropbear.
854Stopping syslogd/klogd: stopped syslogd (pid 2131)
855stopped klogd (pid 2134)
856done
857Stopping tcf-agent: OK
858Deconfiguring network interfaces... done.
859Sending all processes the TERM signal...
860logout
861[ 344.114693] macb ff0c0000.ethernet eth0: link down
862Sending all processes the KILL signal...
863Unmounting remote filesystems...
864Deactivating swap...
865Unmounting local filesystems...
866Rebooting... [ 350.958765] sd 0:0:0:0: [sda] Synchronizing SCSI cache
867êXilinx Zynq MP First Stage Boot Loader
868Release 2017.3 May 24 2018 - 10:35:53
869Marvell PHY reset
870SI5338 0x70 already configured
871SI5338 0x71 already configured
872
873
874U-Boot 2017.01 (Jul 26 2018 - 02:50:11 -0600) Xilinx ZynqMP ZCU102 revB
875
876I2C: ready
877DRAM: 2 GiB
878EL Level: EL2
879Chip ID: xczu3eg
880MMC: Card did not respond to voltage select!
881sdhci@ff160000 - probe failed: -95
882Card did not respond to voltage select!
883
884zynqmp_qspi_ofdata_to_platdata: CLK 300000000
885SF: Detected n25q1024 with page size 256 Bytes, erase size 64 KiB, total 128 MiB
886*** Warning - bad CRC, using default environment
887
888In: serial
889Out: serial
890Err: serial
891Bootmode: QSPI_MODE
892Net: ZYNQ GEM: ff0c0000, phyaddr c, interface rgmii-id
893eth0: ethernet@ff0c0000
894U-BOOT for VP88x_2017_3_PRJ0191
895
896Hit any key to stop autoboot: 0
897SF: Detected n25q1024 with page size 256 Bytes, erase size 64 KiB, total 128 MiB
898device 0 offset 0x540000, size 0x2200000
899SF: 35651584 bytes @ 0x540000 Read: OK
900## Loading kernel from FIT Image at 10000000 ...
901 Using 'conf@1' configuration
902 Trying 'kernel@0' kernel subimage
903 Description: Linux Kernel
904 Type: Kernel Image
905 Compression: uncompressed
906 Data Start: 0x100000d8
907 Data Size: 12503552 Bytes = 11.9 MiB
908 Architecture: AArch64
909 OS: Linux
910 Load Address: 0x00080000
911 Entry Point: 0x00080000
912 Hash algo: sha1
913 Hash value: 6738559f9c7602fa2a0ff36fdfc8cf5b9b3e6565
914 Verifying Hash Integrity ... sha1+ OK
915## Loading ramdisk from FIT Image at 10000000 ...
916 Using 'conf@1' configuration
917 Trying 'ramdisk@0' ramdisk subimage
918 Description: ramdisk
919 Type: RAMDisk Image
920 Compression: uncompressed
921 Data Start: 0x10bf54e4
922 Data Size: 8973721 Bytes = 8.6 MiB
923 Architecture: AArch64
924 OS: Linux
925 Load Address: unavailable
926 Entry Point: unavailable
927 Hash algo: sha1
928 Hash value: 4b595c4e0c42ac8967d3d732b389c6521f0b492f
929 Verifying Hash Integrity ... sha1+ OK
930## Loading fdt from FIT Image at 10000000 ...
931 Using 'conf@1' configuration
932 Trying 'fdt@0' fdt subimage
933 Description: Flattened Device Tree blob
934 Type: Flat Device Tree
935 Compression: uncompressed
936 Data Start: 0x10becbd0
937 Data Size: 34910 Bytes = 34.1 KiB
938 Architecture: AArch64
939 Hash algo: sha1
940 Hash value: 20fc450d3d82f1967aba254f93c3704b6f5d1f6e
941 Verifying Hash Integrity ... sha1+ OK
942 Booting using the fdt blob at 0x10becbd0
943 Loading Kernel Image ... OK
944 Loading Ramdisk to 07771000, end 07fffd99 ... OK
945 Loading Device Tree to 0000000007765000, end 000000000777085d ... OK
946
947Starting kernel ...
948
949[ 0.000000] Booting Linux on physical CPU 0x0
950[ 0.000000] Linux version 4.9.0 (user@user-VirtualBox) (gcc version 6.2.1 20161016 (Linaro GCC 6.2-2016.11) ) #1 SMP Thu Jul 26 01:50:46 MDT 2018
951[ 0.000000] Boot CPU: AArch64 Processor [410fd034]
952[ 0.000000] earlycon: cdns0 at MMIO 0x00000000ff010000 (options '115200n8')
953[ 0.000000] bootconsole [cdns0] enabled
954[ 0.000000] efi: Getting EFI parameters from FDT:
955[ 0.000000] efi: UEFI not found.
956[ 0.000000] cma: Reserved 512 MiB at 0x0000000060000000
957[ 0.000000] psci: probing for conduit method from DT.
958[ 0.000000] psci: PSCIv1.0 detected in firmware.
959[ 0.000000] psci: Using standard PSCI v0.2 function IDs
960[ 0.000000] psci: MIGRATE_INFO_TYPE not supported.
961[ 0.000000] percpu: Embedded 21 pages/cpu @ffffffc05ff76000 s46232 r8192 d31592 u86016
962[ 0.000000] Detected VIPT I-cache on CPU0
963[ 0.000000] CPU features: enabling workaround for ARM erratum 845719
964[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 517120
965[ 0.000000] Kernel command line: console=ttyPS0,115200 earlyprintk earlycon=cdns,mmio,0xFF010000,115200n8 uio_pdrv_genirq.of_id=generic-uio clk_ignore_unused cma=512M coherent_pool=64MiB
966[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
967[ 0.000000] Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes)
968[ 0.000000] Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes)
969[ 0.000000] Memory: 1519128K/2097152K available (8508K kernel code, 562K rwdata, 2636K rodata, 448K init, 382K bss, 53736K reserved, 524288K cma-reserved)
970[ 0.000000] Virtual kernel memory layout:
971[ 0.000000] modules : 0xffffff8000000000 - 0xffffff8008000000 ( 128 MB)
972[ 0.000000] vmalloc : 0xffffff8008000000 - 0xffffffbebfff0000 ( 250 GB)
973[ 0.000000] .text : 0xffffff8008080000 - 0xffffff80088d0000 ( 8512 KB)
974[ 0.000000] .rodata : 0xffffff80088d0000 - 0xffffff8008b70000 ( 2688 KB)
975[ 0.000000] .init : 0xffffff8008b70000 - 0xffffff8008be0000 ( 448 KB)
976[ 0.000000] .data : 0xffffff8008be0000 - 0xffffff8008c6ca00 ( 563 KB)
977[ 0.000000] .bss : 0xffffff8008c6ca00 - 0xffffff8008ccc434 ( 383 KB)
978[ 0.000000] fixed : 0xffffffbefe7fd000 - 0xffffffbefec00000 ( 4108 KB)
979[ 0.000000] PCI I/O : 0xffffffbefee00000 - 0xffffffbeffe00000 ( 16 MB)
980[ 0.000000] vmemmap : 0xffffffbf00000000 - 0xffffffc000000000 ( 4 GB maximum)
981[ 0.000000] 0xffffffbf00000000 - 0xffffffbf01c00000 ( 28 MB actual)
982[ 0.000000] memory : 0xffffffc000000000 - 0xffffffc080000000 ( 2048 MB)
983[ 0.000000] Hierarchical RCU implementation.
984[ 0.000000] Build-time adjustment of leaf fanout to 64.
985[ 0.000000] RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=4.
986[ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=64, nr_cpu_ids=4
987[ 0.000000] NR_IRQS:64 nr_irqs:64 0
988[ 0.000000] GIC: Adjusting CPU interface base to 0x00000000f902f000
989[ 0.000000] GIC: Using split EOI/Deactivate mode
990[ 0.000000] arm_arch_timer: Architected cp15 timer(s) running at 50.00MHz (phys).
991[ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0xb8812736b, max_idle_ns: 440795202655 ns
992[ 0.000003] sched_clock: 56 bits at 50MHz, resolution 20ns, wraps every 4398046511100ns
993[ 0.008253] Console: colour dummy device 80x25
994[ 0.012519] Calibrating delay loop (skipped), value calculated using timer frequency.. 100.00 BogoMIPS (lpj=200000)
995[ 0.022878] pid_max: default: 32768 minimum: 301
996[ 0.027570] Mount-cache hash table entries: 4096 (order: 3, 32768 bytes)
997[ 0.034129] Mountpoint-cache hash table entries: 4096 (order: 3, 32768 bytes)
998[ 0.041859] ASID allocator initialised with 65536 entries
999[ 0.047560] zynqmp_plat_init Power management API v0.3
1000[ 0.052578] EFI services will not be available.
1001[ 0.057341] Detected VIPT I-cache on CPU1
1002[ 0.057376] CPU1: Booted secondary processor [410fd034]
1003[ 0.057635] Detected VIPT I-cache on CPU2
1004[ 0.057651] CPU2: Booted secondary processor [410fd034]
1005[ 0.057899] Detected VIPT I-cache on CPU3
1006[ 0.057915] CPU3: Booted secondary processor [410fd034]
1007[ 0.057947] Brought up 4 CPUs
1008[ 0.088228] SMP: Total of 4 processors activated.
1009[ 0.092905] CPU features: detected feature: 32-bit EL0 Support
1010[ 0.098701] CPU: All CPU(s) started at EL2
1011[ 0.102775] alternatives: patching kernel code
1012[ 0.108032] devtmpfs: initialized
1013[ 0.115565] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
1014[ 0.136576] xor: measuring software checksum speed
1015[ 0.181246] 8regs : 2543.000 MB/sec
1016[ 0.221269] 8regs_prefetch: 2266.000 MB/sec
1017[ 0.265638] 32regs : 3125.000 MB/sec
1018[ 0.305666] 32regs_prefetch: 2627.000 MB/sec
1019[ 0.310087] xor: using function: 32regs (3125.000 MB/sec)
1020[ 0.315539] pinctrl core: initialized pinctrl subsystem
1021[ 0.321227] NET: Registered protocol family 16
1022[ 0.326317] Failed to initialise IOMMU /amba/smmu@fd800000
1023[ 0.331822] vdso: 2 pages (1 code @ ffffff80088d7000, 1 data @ ffffff8008be4000)
1024[ 0.339023] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers.
1025[ 0.374286] DMA: preallocated 65536 KiB pool for atomic allocations
1026[ 0.390643] reset_zynqmp reset-controller: Xilinx zynqmp reset driver probed
1027[ 0.398119] ARM CCI_400_r1 PMU driver probed[ 0.404889] zynqmp-pinctrl ff180000.pinctrl: zynqmp pinctrl initialized
1028[ 0.431596] HugeTLB registered 2 MB page size, pre-allocated 0 pages
1029[ 0.504880] raid6: int64x1 gen() 447 MB/s
1030[ 0.576893] raid6: int64x1 xor() 471 MB/s
1031[ 0.648947] raid6: int64x2 gen() 741 MB/s
1032[ 0.720997] raid6: int64x2 xor() 661 MB/s
1033[ 0.793035] raid6: int64x4 gen() 1086 MB/s
1034[ 0.865056] raid6: int64x4 xor() 816 MB/s
1035[ 0.937106] raid6: int64x8 gen() 1265 MB/s
1036[ 1.009172] raid6: int64x8 xor() 824 MB/s
1037[ 1.081197] raid6: neonx1 gen() 796 MB/s
1038[ 1.153226] raid6: neonx1 xor() 837 MB/s
1039[ 1.225272] raid6: neonx2 gen() 1285 MB/s
1040[ 1.297337] raid6: neonx2 xor() 1143 MB/s
1041[ 1.369364] raid6: neonx4 gen() 1663 MB/s
1042[ 1.441405] raid6: neonx4 xor() 1306 MB/s
1043[ 1.513447] raid6: neonx8 gen() 1752 MB/s
1044[ 1.585488] raid6: neonx8 xor() 1348 MB/s
1045[ 1.589569] raid6: using algorithm neonx8 gen() 1752 MB/s
1046[ 1.594931] raid6: .... xor() 1348 MB/s, rmw enabled
1047[ 1.599862] raid6: using intx1 recovery algorithm
1048[ 1.605023] Write failed gate address:1000f02
1049[ 1.612888] SCSI subsystem initialized
1050[ 1.616678] usbcore: registered new interface driver usbfs
1051[ 1.622007] usbcore: registered new interface driver hub
1052[ 1.627289] usbcore: registered new device driver usb
1053[ 1.632336] media: Linux media interface: v0.10
1054[ 1.636788] Linux video capture interface: v2.00
1055[ 1.641374] pps_core: LinuxPPS API ver. 1 registered
1056[ 1.646278] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
1057[ 1.655373] PTP clock support registered
1058[ 1.659273] EDAC MC: Ver: 3.0.0
1059[ 1.662617] FPGA manager framework
1060[ 1.665954] fpga-region fpga-full: FPGA Region probed
1061[ 1.670962] Advanced Linux Sound Architecture Driver Initialized.
1062[ 1.677212] Bluetooth: Core ver 2.22
1063[ 1.680617] NET: Registered protocol family 31
1064[ 1.685014] Bluetooth: HCI device and connection manager initialized
1065[ 1.691332] Bluetooth: HCI socket layer initialized
1066[ 1.696174] Bluetooth: L2CAP socket layer initialized
1067[ 1.701208] Bluetooth: SCO socket layer initialized
1068[ 1.706597] clocksource: Switched to clocksource arch_sys_counter
1069[ 1.712598] VFS: Disk quotas dquot_6.6.0
1070[ 1.716440] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
1071[ 1.726718] NET: Registered protocol family 2
1072[ 1.731267] TCP established hash table entries: 16384 (order: 5, 131072 bytes)
1073[ 1.738385] TCP bind hash table entries: 16384 (order: 6, 262144 bytes)
1074[ 1.745166] TCP: Hash tables configured (established 16384 bind 16384)
1075[ 1.751563] UDP hash table entries: 1024 (order: 3, 32768 bytes)
1076[ 1.757499] UDP-Lite hash table entries: 1024 (order: 3, 32768 bytes)
1077[ 1.764009] NET: Registered protocol family 1
1078[ 1.768446] RPC: Registered named UNIX socket transport module.
1079[ 1.774174] RPC: Registered udp transport module.
1080[ 1.778840] RPC: Registered tcp transport module.
1081[ 1.783511] RPC: Registered tcp NFSv4.1 backchannel transport module.
1082[ 1.790072] Trying to unpack rootfs image as initramfs...
1083[ 2.113201] Freeing initrd memory: 8760K (ffffffc007771000 - ffffffc007fff000)
1084[ 2.120628] hw perfevents: enabled with armv8_pmuv3 PMU driver, 7 counters available
1085[ 2.128939] futex hash table entries: 1024 (order: 5, 131072 bytes)
1086[ 2.135570] workingset: timestamp_bits=62 max_order=19 bucket_order=0
1087[ 2.142532] NFS: Registering the id_resolver key type
1088[ 2.147415] Key type id_resolver registered
1089[ 2.151543] Key type id_legacy registered
1090[ 2.155528] nfs4filelayout_init: NFSv4 File Layout Driver Registering...
1091[ 2.162198] ntfs: driver 2.1.32 [Flags: R/W].
1092[ 2.166527] jffs2: version 2.2. (NAND) (SUMMARY) © 2001-2006 Red Hat, Inc.
1093[ 2.181324] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 247)
1094[ 2.188532] io scheduler noop registered
1095[ 2.192423] io scheduler deadline registered
1096[ 2.196661] io scheduler cfq registered (default)
1097[ 2.201918] nwl-pcie fd0e0000.pcie: Link is UP
1098[ 2.206206] OF: PCI: host bridge /amba/pcie@fd0e0000 ranges:
1099[ 2.211808] OF: PCI: MEM 0xe0000000..0xefffffff -> 0xe0000000
1100[ 2.217675] OF: PCI: MEM 0x600000000..0x7ffffffff -> 0x600000000
1101[ 2.223897] nwl-pcie fd0e0000.pcie: PCI host bridge to bus 0000:00
1102[ 2.229961] pci_bus 0000:00: root bus resource [bus 00-ff]
1103[ 2.235407] pci_bus 0000:00: root bus resource [mem 0xe0000000-0xefffffff]
1104[ 2.242239] pci_bus 0000:00: root bus resource [mem 0x600000000-0x7ffffffff pref]
1105[ 2.250166] pci 0000:00:00.0: BAR 8: assigned [mem 0xe0000000-0xe00fffff]
1106[ 2.256759] pci 0000:01:00.0: BAR 0: assigned [mem 0xe0000000-0xe00007ff]
1107[ 2.263507] pci 0000:00:00.0: PCI bridge to [bus 01-0c]
1108[ 2.268693] pci 0000:00:00.0: bridge window [mem 0xe0000000-0xe00fffff]
1109[ 2.276150] xilinx-dpdma fd4c0000.dma: Xilinx DPDMA engine is probed
1110[ 2.282523] xilinx-vdma 400000000.dma: Xilinx AXI VDMA Engine Driver Probed!!
1111[ 2.289578] xilinx-vdma 400010000.dma: Xilinx AXI VDMA Engine Driver Probed!!
1112[ 2.296728] xilinx-zynqmp-dma fd500000.dma: ZynqMP DMA driver Probe success
1113[ 2.303591] xilinx-zynqmp-dma fd510000.dma: ZynqMP DMA driver Probe success
1114[ 2.310514] xilinx-zynqmp-dma fd520000.dma: ZynqMP DMA driver Probe success
1115[ 2.317426] xilinx-zynqmp-dma fd530000.dma: ZynqMP DMA driver Probe success
1116[ 2.324351] xilinx-zynqmp-dma fd540000.dma: ZynqMP DMA driver Probe success
1117[ 2.331270] xilinx-zynqmp-dma fd550000.dma: ZynqMP DMA driver Probe success
1118[ 2.338188] xilinx-zynqmp-dma fd560000.dma: ZynqMP DMA driver Probe success
1119[ 2.345109] xilinx-zynqmp-dma fd570000.dma: ZynqMP DMA driver Probe success
1120[ 2.352068] xilinx-zynqmp-dma ffa80000.dma: ZynqMP DMA driver Probe success
1121[ 2.358951] xilinx-zynqmp-dma ffa90000.dma: ZynqMP DMA driver Probe success
1122[ 2.365867] xilinx-zynqmp-dma ffaa0000.dma: ZynqMP DMA driver Probe success
1123[ 2.372791] xilinx-zynqmp-dma ffab0000.dma: ZynqMP DMA driver Probe success
1124[ 2.379713] xilinx-zynqmp-dma ffac0000.dma: ZynqMP DMA driver Probe success
1125[ 2.386632] xilinx-zynqmp-dma ffad0000.dma: ZynqMP DMA driver Probe success
1126[ 2.393554] xilinx-zynqmp-dma ffae0000.dma: ZynqMP DMA driver Probe success
1127[ 2.400470] xilinx-zynqmp-dma ffaf0000.dma: ZynqMP DMA driver Probe success
1128[ 2.428806] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
1129[ 2.436368] ff000000.serial: ttyPS1 at MMIO 0xff000000 (irq = 46, base_baud = 6250000) is a xuartps
1130[ 2.445390] ff010000.serial: ttyPS0 at MMIO 0xff010000 (irq = 47, base_baud =·r¢ª¢êconsole [ttyPS0] enabled
1131[ 2.454330] console [ttyPS0] enabled
1132[ 2.461294] bootconsole [cdns0] disabled
1133[ 2.461294] bootconsole [cdns0] disabled
1134[ 2.469346] Unable to detect cache hierarchy from DT for CPU 0
1135[ 2.479683] brd: module loaded
1136[ 2.485461] loop: module loaded
1137[ 2.489443] ahci-ceva fd0c0000.ahci: AHCI 0001.0301 32 slots 2 ports 6 Gbps 0x3 impl platform mode
1138[ 2.498321] ahci-ceva fd0c0000.ahci: flags: 64bit ncq sntf pm clo only pmp fbs pio slum part ccc sds apst
1139[ 2.509030] scsi host0: ahci-ceva
1140[ 2.512456] scsi host1: ahci-ceva
1141[ 2.515790] ata1: SATA max UDMA/133 mmio [mem 0xfd0c0000-0xfd0c1fff] port 0x100 irq 43
1142[ 2.523617] ata2: SATA max UDMA/133 mmio [mem 0xfd0c0000-0xfd0c1fff] port 0x180 irq 43
1143[ 2.531666] mtdoops: mtd device (mtddev=name/number) must be supplied
1144[ 2.539003] zynqmp-qspi ff0f0000.spi: rx bus width not found
1145[ 2.544944] m25p80 spi0.0: found n25q00, expected n25q512a
1146[ 2.550660] m25p80 spi0.0: n25q00 (131072 Kbytes)
1147[ 2.555303] 5 ofpart partitions found on MTD device spi0.0
1148[ 2.560757] Creating 5 MTD partitions on "spi0.0":
1149[ 2.565525] 0x000000000000-0x000000500000 : "boot"
1150[ 2.570804] 0x000000500000-0x000000540000 : "bootenv"
1151[ 2.576179] 0x000000540000-0x000002740000 : "kernel"
1152[ 2.581478] 0x000002740000-0x000003740000 : "user"
1153[ 2.586604] 0x000003740000-0x000003750000 : "test"
1154[ 2.592602] libphy: Fixed MDIO Bus: probed
1155[ 2.597712] tun: Universal TUN/TAP device driver, 1.6
1156[ 2.602685] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
1157[ 2.608960] CAN device driver interface
1158[ 2.613279] macb ff0c0000.ethernet: Not enabling partial store and forward
1159[ 2.620588] libphy: MACB_mii_bus: probed
1160[ 2.698870] macb ff0c0000.ethernet eth0: Cadence GEM rev 0x50070106 at 0xff0c0000 irq 30 (00:0a:35:00:22:01)
1161[ 2.708619] Marvell 88E1510 ff0c0000.etherne:00: attached PHY driver [Marvell 88E1510] (mii_bus:phy_addr=ff0c0000.etherne:00, irq=-1)
1162[ 2.721215] usbcore: registered new interface driver asix
1163[ 2.726580] usbcore: registered new interface driver ax88179_178a
1164[ 2.732627] usbcore: registered new interface driver cdc_ether
1165[ 2.738444] usbcore: registered new interface driver net1080
1166[ 2.744086] usbcore: registered new interface driver cdc_subset
1167[ 2.749987] usbcore: registered new interface driver zaurus
1168[ 2.755556] usbcore: registered new interface driver cdc_ncm
1169[ 2.761514] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
1170[ 2.767959] ehci-pci: EHCI PCI platform driver
1171[ 2.772620] usbcore: registered new interface driver uas
1172[ 2.777880] usbcore: registered new interface driver usb-storage
1173[ 2.784143] mousedev: PS/2 mouse device common for all mice
1174[ 2.790054] rtc_zynqmp ffa60000.rtc: rtc core: registered ffa60000.rtc as rtc0
1175[ 2.797226] i2c /dev entries driver
1176[ 2.800856] cdns-i2c ff020000.i2c: 400 kHz mmio ff020000 irq 32
1177[ 2.806903] cdns-i2c ff030000.i2c: 400 kHz mmio ff030000 irq 33
1178[ 2.813673] usbcore: registered new interface driver uvcvideo
1179[ 2.819337] USB Video Class driver (1.1.1)
1180[ 2.823773] Bluetooth: HCI UART driver ver 2.3
1181[ 2.828131] Bluetooth: HCI UART protocol H4 registered
1182[ 2.833248] Bluetooth: HCI UART protocol BCSP registered
1183[ 2.838543] Bluetooth: HCI UART protocol LL registered
1184[ 2.843663] Bluetooth: HCI UART protocol ATH3K registered
1185[ 2.845311] ata2: SATA link down (SStatus 0 SControl 330)
1186[ 2.854427] Bluetooth: HCI UART protocol Three-wire (H5) registered
1187[ 2.860712] Bluetooth: HCI UART protocol Intel registered
1188[ 2.866092] Bluetooth: HCI UART protocol Broadcom registered
1189[ 2.871700] Bluetooth: HCI UART protocol QCA registered
1190[ 2.876943] usbcore: registered new interface driver bcm203x
1191[ 2.882582] usbcore: registered new interface driver bpa10x
1192[ 2.888137] usbcore: registered new interface driver bfusb
1193[ 2.893605] usbcore: registered new interface driver btusb
1194[ 2.899042] Bluetooth: Generic Bluetooth SDIO driver ver 0.1
1195[ 2.904737] usbcore: registered new interface driver ath3k
1196[ 2.910273] EDAC MC: ECC not enabled
1197[ 2.913902] EDAC DEVICE0: Giving out device to module edac controller cache_err: DEV edac (POLLED)
1198[ 2.922935] EDAC DEVICE1: Giving out device to module zynqmp-ocm-edac controller zynqmp_ocm: DEV ff960000.memory-controller (INTERRUPT)
1199[ 2.935231] sdhci: Secure Digital Host Controller Interface driver
1200[ 2.941322] sdhci: Copyright(c) Pierre Ossman
1201[ 2.945661] sdhci-pltfm: SDHCI platform and OF driver helper
1202[ 2.998608] mmc0: SDHCI controller on ff160000.sdhci [ff160000.sdhci] using ADMA 64-bit
1203[ 3.006614] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 330)
1204[ 3.014862] ledtrig-cpu: registered to indicate activity on CPUs
1205[ 3.020911] usbcore: registered new interface driver usbhid
1206[ 3.026395] usbhid: USB HID core driver
1207[ 3.031803] fpga_manager fpga0: Xilinx ZynqMP FPGA Manager registered
1208[ 3.038681] xilinx-dp-snd-pcm dp_snd_pcm0: Xilinx DisplayPort Sound PCM probed
1209[ 3.045838] xilinx-dp-snd-pcm dp_snd_pcm1: Xilinx DisplayPort Sound PCM probed
1210[ 3.053195] PLL: shutdown
1211[ 3.056622] Write failed to divider address:fd1a007c
1212[ 3.061654] PLL: enable
1213[ 3.064181] xilinx-dp-snd-codec dp_snd_codec0: Xilinx DisplayPort Sound Codec probed
1214[ 3.072758] xilinx-dp-snd-card dp_snd_card: xilinx-dp-snd-codec-dai <-> xilinx-dp-snd-codec-dai mapping ok
1215[ 3.082427] xilinx-dp-snd-card dp_snd_card: xilinx-dp-snd-codec-dai <-> xilinx-dp-snd-codec-dai mapping ok
1216[ 3.092282] xilinx-dp-snd-card dp_snd_card: Xilinx DisplayPort Sound Card probed
1217[ 3.099704] pktgen: Packet Generator for packet performance testing. Version: 2.75
1218[ 3.108018] Netfilter messages via NETLINK v0.30.
1219[ 3.112759] ip_tables: (C) 2000-2006 Netfilter Core Team
1220[ 3.118039] Initializing XFRM netlink socket
1221[ 3.123366] NET: Registered protocol family 10
1222[ 3.128199] ip6_tables: (C) 2000-2006 Netfilter Core Team
1223[ 3.133553] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver
1224[ 3.139768] NET: Registered protocol family 17
1225[ 3.144135] NET: Registered protocol family 15
1226[ 3.148560] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this.
1227[ 3.161483] Ebtables v2.0 registered
1228[ 3.165094] can: controller area network core (rev 20120528 abi 9)
1229[ 3.171242] NET: Registered protocol family 29
1230[ 3.175632] can: raw protocol (rev 20120528)
1231[ 3.179883] can: broadcast manager protocol (rev 20161123 t)
1232[ 3.185528] can: netlink gateway (rev 20130117) max_hops=1
1233[ 3.191563] Bluetooth: RFCOMM TTY layer initialized
1234[ 3.196358] Bluetooth: RFCOMM socket layer initialized
1235[ 3.201479] Bluetooth: RFCOMM ver 1.11
1236[ 3.205206] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
1237[ 3.210497] Bluetooth: BNEP filters: protocol multicast
1238[ 3.215711] Bluetooth: BNEP socket layer initialized
1239[ 3.220654] Bluetooth: HIDP (Human Interface Emulation) ver 1.2
1240[ 3.226558] Bluetooth: HIDP socket layer initialized
1241[ 3.231683] 9pnet: Installing 9P2000 support
1242[ 3.235878] Key type dns_resolver registered
1243[ 3.240526] registered taskstats version 1
1244[ 3.244940] Btrfs loaded, crc32c=crc32c-generic
1245[ 3.256625] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller
1246[ 3.262063] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 1
1247[ 3.269928] xhci-hcd xhci-hcd.0.auto: hcc params 0x0238f625 hci version 0x100 quirks 0x02010010
1248[ 3.278586] xhci-hcd xhci-hcd.0.auto: irq 229, io mem 0xfe300000
1249[ 3.286697] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
1250[ 3.293407] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
1251[ 3.300607] usb usb1: Product: xHCI Host Controller
1252[ 3.305468] usb usb1: Manufacturer: Linux 4.9.0 xhci-hcd
1253[ 3.310763] usb usb1: SerialNumber: xhci-hcd.0.auto
1254[ 3.318975] hub 1-0:1.0: USB hub found
1255[ 3.322676] ata1.00: ATA-8: ST9250315AS, 0002SDM1, max UDMA/133
1256[ 3.328544] ata1.00: 488397168 sectors, multi 16: LBA48 NCQ (depth 31/32)
1257[ 3.335348] hub 1-0:1.0: 1 port detected
1258[ 3.339343] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller
1259[ 3.342435] ata1.00: configured for UDMA/133
1260[ 3.342752] scsi 0:0:0:0: Direct-Access ATA ST9250315AS SDM1 PQ: 0 ANSI: 5
1261[ 3.357077] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 2
1262[ 3.364757] usb usb2: We don't know the algorithms for LPM for this host, disabling LPM.
1263[ 3.372859] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003
1264[ 3.379565] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
1265[ 3.386765] usb usb2: Product: xHCI Host Controller
1266[ 3.391625] usb usb2: Manufacturer: Linux 4.9.0 xhci-hcd
1267[ 3.396920] usb usb2: SerialNumber: xhci-hcd.0.auto
1268[ 3.402006] hub 2-0:1.0: USB hub found
1269[ 3.405694] hub 2-0:1.0: 1 port detected
1270[ 3.409980] rtc_zynqmp ffa60000.rtc: setting system clock to 2018-07-26 08:57:55 UTC (1532595475)
1271[ 3.418882] clk: Not disabling unused clocks
1272[ 3.422977] sd 0:0:0:0: [sda] 488397168 512-byte logical blocks: (250 GB/233 GiB)
1273[ 3.423083] sd 0:0:0:0: [sda] Write Protect is off
1274[ 3.423130] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
1275[ 3.444333] ALSA device list:
1276[ 3.447280] #0: DisplayPort monitor
1277[ 3.453982] sd 0:0:0:0: [sda] Attached SCSI disk
1278[ 3.458716] Freeing unused kernel memory: 448K (ffffffc000b70000 - ffffffc000be0000)
1279INIT: version 2.88 booting
1280Starting udev
1281[ 3.576953] udevd[1623]: starting version 3.2
1282[ 3.581572] random: udevd: uninitialized urandom read (16 bytes read)
1283[ 3.588009] random: udevd: uninitialized urandom read (16 bytes read)
1284[ 3.594428] random: udevd: uninitialized urandom read (16 bytes read)
1285[ 3.600819] random: udevd: uninitialized urandom read (16 bytes read)
1286[ 3.610901] udevd[1624]: starting eudev-3.2
1287[ 3.649355] random: udevd: uninitialized urandom read (16 bytes read)
1288[ 3.655773] random: udevd: uninitialized urandom read (16 bytes read)
1289[ 3.670997] random: udevd: uninitialized urandom read (16 bytes read)
1290[ 3.681380] random: udevd: uninitialized urandom read (16 bytes read)
1291[ 3.690994] 4fm: loading out-of-tree module taints kernel.
1292[ 3.697885] pci 0000:00:00.0: enabling device (0000 -> 0002)
1293[ 3.702132] <dma1> init: registered
1294[ 3.706995] 4FM 0000:01:00.0: enabling device (0000 -> 0002)
1295[ 3.712628] Accessing 47232 of total 1 entries in dev->bar
1296[ 3.718099] dev->bar[u].virt_address:cf3d07c value:38011121
1297[ 3.723619] dev->bar[u].virt_address:cf3d080 value:deadbeef
1298[ 3.729201] dev->bar[u].virt_address:cf3d084 value:baadf00d
1299[ 3.734713] dev->bar[u].virt_address:cf3d088 value:eba00eba
1300[ 3.740295] dev->bar[u].virt_address:cf3d08c value:beefdeaf
1301[ 3.752144] <dma2> init: registered
1302[ 3.753225] /media/yocto4/vp880/VP88x_2017_3_PRJ0191/build/tmp/work/plnx_aarch64-xilinx-linux/4fm/1.0-r0/4fm.c: found 1 devices
1303Populating dev cache
1304[ 4.634248] random: dd: uninitialized urandom read (512 bytes read)
1305Starting internet superserver: inetd.
1306Running postinst /etc/rpm-postinsts/100-sysvinit-inittab...
1307update-rc.d: /etc/init.d/run-postinsts exists during rc.d purge (continuing)
1308INIT: Entering runlevel: 5
1309Hello World
1310[22]:0x12
1311[20]:0x201
1312[20]:0x201
1313[22]:0x1
1314[0]:0x140
1315[0]:0x140
1316Configuring network interfaces... [ 4.924400] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
1317done.
1318Starting Dropbear SSH server: [ 4.953034] random: dropbearkey: uninitialized urandom read (32 bytes read)
1319Generating key, this may take a while...
1320[ 5.938718] macb ff0c0000.ethernet eth0: link up (1000/Full)
1321[ 5.944319] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
1322Public key portion is:
1323ssh-rsa AAAAB3NzaC1yc2EAAAADAQABAAABAQCtBURrhoXQQSQvr6E42A+ucdKPeXyyw6L1oRpYa5qUZPnn9D3BBFXxMWDg8DBSoI9n4YbFW2YgCFx7X0nDkK8t9pv2C0W1RjmMUR/goQQYHoOWFJatIPz2OT86C/PWOkPXwagYWxHLXFjyr0DvyWt0GYCVmEaHx2pShX09ePyq0tZIlH+dU3gcbOnpcf4oNo1/rfL+j4fz9ekwRaVwk8ww7LHmaST9Bn11sAMOvhU7zRyX1mqt98CRrYjFt4cyuIhNMaR/2Bsx4kySPJ8dCVes/JodVqk60TN9LgTgO7UFoD9IeUjo58A8UvWfRF+DbCCSOXkog+ICGrRanmENImH3 root@VP88x_2017_3_PRJ0191
1324Fingerprint: md5 c7:5a:f0:2c:4b:b5:9f:06:df:57:29:30:69:8e:19:7[ 8.032688] random: fast init done
1325d
1326dropbear.
1327Starting syslogd/klogd: done
1328[ 8.343561] random: crng init done
1329[ 10.145565] jffs2: notice: (2130) jffs2_build_xattr_subsystem: complete building xattr subsystem, 0 of xdatum (0 unchecked, 0 orphan) and 0 of xref (0 dead, 0 orphan) found.
1330hello world.....
1331Starting tcf-agent: OK
1332
1333root@VP88x_2017_3_PRJ0191:~# mount
1334rootfs on / type rootfs (rw,size=759564k,nr_inodes=189891)
1335proc on /proc type proc (rw,relatime)
1336sysfs on /sys type sysfs (rw,relatime)
1337debugfs on /sys/kernel/debug type debugfs (rw,relatime)
1338devtmpfs on /dev type devtmpfs (rw,relatime,size=759564k,nr_inodes=189891,mode=755)
1339tmpfs on /run type tmpfs (rw,nosuid,nodev,mode=755)
1340tmpfs on /var/volatile type tmpfs (rw,relatime)
1341devpts on /dev/pts type devpts (rw,relatime,gid=5,mode=620,ptmxmode=000)
1342/dev/mtdblock3 on /mnt type jffs2 (rw,relatime)
1343root@VP88x_2017_3_PRJ0191:~# mkfs.vfat /dev/sda
1344sda sda1
1345root@VP88x_2017_3_PRJ0191:~# mkfs.vfat /dev/sda^C
1346root@VP88x_2017_3_PRJ0191:~# fdisk /dev/sda
1347
1348The number of cylinders for this disk is set to 30401.
1349There is nothing wrong with that, but this is larger than 1024,
1350and could in certain setups cause problems with:
13511) software that runs at boot time (e.g., old versions of LILO)
13522) booting and partitioning software from other OSs
1353 (e.g., DOS FDISK, OS/2 FDISK)
1354
1355Command (m for help): d
1356Selected partition 1
1357
1358Command (m for help): d
1359No partition is defined yet!
1360
1361Command (m for help): d
1362No partition is defined yet!
1363
1364Command (m for help): n
1365Command action
1366 e extended
1367 p primary partition (1-4)
1368p
1369Partition number (1-4): Value is out of range
1370Partition number (1-4): Value is out of range
1371Partition number (1-4): Value is out of range
1372Partition number (1-4): 1
1373First cylinder (1-30401, default 1): Using default value 1
1374Last cylinder or +size or +sizeM or +sizeK (1-30401, default 30401): Using default value 30401
1375
1376Command (m for help):
1377Command (m for help):
1378Command (m for help): w
1379The partition table has been altered.
1380Calling ioctl() to re-read partition table
1381[ 113.993684] sda: sda1
1382root@VP88x_2017_3_PRJ0191:~# [ 113.998038] sda: sda1
1383
1384root@VP88x_2017_3_PRJ0191:~#
1385root@VP88x_2017_3_PRJ0191:~#
1386root@VP88x_2017_3_PRJ0191:~# mkfs.vfat /dev/sda1
1387root@VP88x_2017_3_PRJ0191:~# sync
1388root@VP88x_2017_3_PRJ0191:~# mkfs.vfat /dev/sda1^C
1389root@VP88x_2017_3_PRJ0191:~# reboot
1390
1391The system is going down for reboot NOW!_PRJ0191 (ttyPS0) (Thu Jul 26 0é00:2
1392INIT: Sending processes the TERM signal
1393root@VP88x_2017_3_PRJ0191:~# Stopping Dropbear SSH server: stopped /usr/sbin/dropbear (pid 2117)
1394dropbear.
1395Stopping syslogd/klogd: stopped syslogd (pid 2125)
1396stopped klogd (pid 2128)
1397done
1398Stopping tcf-agent: OK
1399Deconfiguring network interfaces... done.
1400Sending all processes the TERM signal...
1401logout
1402[ 156.466627] macb ff0c0000.ethernet eth0: link down
1403Sending all processes the KILL signal...
1404Unmounting remote filesystems...
1405Deactivating swap...
1406Unmounting local filesystems...
1407Rebooting... [ 163.418793] sd 0:0:0:0: [sda] Synchronizing SCSI cache
1408êXilinx Zynq MP First Stage Boot Loader
1409Release 2017.3 May 24 2018 - 10:35:53
1410Marvell PHY reset
1411SI5338 0x70 already configured
1412SI5338 0x71 already configured
1413
1414
1415U-Boot 2017.01 (Jul 26 2018 - 02:50:11 -0600) Xilinx ZynqMP ZCU102 revB
1416
1417I2C: ready
1418DRAM: 2 GiB
1419EL Level: EL2
1420Chip ID: xczu3eg
1421MMC: Card did not respond to voltage select!
1422sdhci@ff160000 - probe failed: -95
1423Card did not respond to voltage select!
1424
1425zynqmp_qspi_ofdata_to_platdata: CLK 300000000
1426SF: Detected n25q1024 with page size 256 Bytes, erase size 64 KiB, total 128 MiB
1427*** Warning - bad CRC, using default environment
1428
1429In: serial
1430Out: serial
1431Err: serial
1432Bootmode: QSPI_MODE
1433Net: ZYNQ GEM: ff0c0000, phyaddr c, interface rgmii-id
1434eth0: ethernet@ff0c0000
1435U-BOOT for VP88x_2017_3_PRJ0191
1436
1437Hit any key to stop autoboot: 0
1438SF: Detected n25q1024 with page size 256 Bytes, erase size 64 KiB, total 128 MiB
1439device 0 offset 0x540000, size 0x2200000
1440SF: 35651584 bytes @ 0x540000 Read: OK
1441## Loading kernel from FIT Image at 10000000 ...
1442 Using 'conf@1' configuration
1443 Trying 'kernel@0' kernel subimage
1444 Description: Linux Kernel
1445 Type: Kernel Image
1446 Compression: uncompressed
1447 Data Start: 0x100000d8
1448 Data Size: 12503552 Bytes = 11.9 MiB
1449 Architecture: AArch64
1450 OS: Linux
1451 Load Address: 0x00080000
1452 Entry Point: 0x00080000
1453 Hash algo: sha1
1454 Hash value: 6738559f9c7602fa2a0ff36fdfc8cf5b9b3e6565
1455 Verifying Hash Integrity ... sha1+ OK
1456## Loading ramdisk from FIT Image at 10000000 ...
1457 Using 'conf@1' configuration
1458 Trying 'ramdisk@0' ramdisk subimage
1459 Description: ramdisk
1460 Type: RAMDisk Image
1461 Compression: uncompressed
1462 Data Start: 0x10bf54e4
1463 Data Size: 8973721 Bytes = 8.6 MiB
1464 Architecture: AArch64
1465 OS: Linux
1466 Load Address: unavailable
1467 Entry Point: unavailable
1468 Hash algo: sha1
1469 Hash value: 4b595c4e0c42ac8967d3d732b389c6521f0b492f
1470 Verifying Hash Integrity ... sha1+ OK
1471## Loading fdt from FIT Image at 10000000 ...
1472 Using 'conf@1' configuration
1473 Trying 'fdt@0' fdt subimage
1474 Description: Flattened Device Tree blob
1475 Type: Flat Device Tree
1476 Compression: uncompressed
1477 Data Start: 0x10becbd0
1478 Data Size: 34910 Bytes = 34.1 KiB
1479 Architecture: AArch64
1480 Hash algo: sha1
1481 Hash value: 20fc450d3d82f1967aba254f93c3704b6f5d1f6e
1482 Verifying Hash Integrity ... sha1+ OK
1483 Booting using the fdt blob at 0x10becbd0
1484 Loading Kernel Image ... OK
1485 Loading Ramdisk to 07771000, end 07fffd99 ... OK
1486 Loading Device Tree to 0000000007765000, end 000000000777085d ... OK
1487
1488Starting kernel ...
1489
1490[ 0.000000] Booting Linux on physical CPU 0x0
1491[ 0.000000] Linux version 4.9.0 (user@user-VirtualBox) (gcc version 6.2.1 20161016 (Linaro GCC 6.2-2016.11) ) #1 SMP Thu Jul 26 01:50:46 MDT 2018
1492[ 0.000000] Boot CPU: AArch64 Processor [410fd034]
1493[ 0.000000] earlycon: cdns0 at MMIO 0x00000000ff010000 (options '115200n8')
1494[ 0.000000] bootconsole [cdns0] enabled
1495[ 0.000000] efi: Getting EFI parameters from FDT:
1496[ 0.000000] efi: UEFI not found.
1497[ 0.000000] cma: Reserved 512 MiB at 0x0000000060000000
1498[ 0.000000] psci: probing for conduit method from DT.
1499[ 0.000000] psci: PSCIv1.0 detected in firmware.
1500[ 0.000000] psci: Using standard PSCI v0.2 function IDs
1501[ 0.000000] psci: MIGRATE_INFO_TYPE not supported.
1502[ 0.000000] percpu: Embedded 21 pages/cpu @ffffffc05ff76000 s46232 r8192 d31592 u86016
1503[ 0.000000] Detected VIPT I-cache on CPU0
1504[ 0.000000] CPU features: enabling workaround for ARM erratum 845719
1505[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 517120
1506[ 0.000000] Kernel command line: console=ttyPS0,115200 earlyprintk earlycon=cdns,mmio,0xFF010000,115200n8 uio_pdrv_genirq.of_id=generic-uio clk_ignore_unused cma=512M coherent_pool=64MiB
1507[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
1508[ 0.000000] Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes)
1509[ 0.000000] Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes)
1510[ 0.000000] Memory: 1519128K/2097152K available (8508K kernel code, 562K rwdata, 2636K rodata, 448K init, 382K bss, 53736K reserved, 524288K cma-reserved)
1511[ 0.000000] Virtual kernel memory layout:
1512[ 0.000000] modules : 0xffffff8000000000 - 0xffffff8008000000 ( 128 MB)
1513[ 0.000000] vmalloc : 0xffffff8008000000 - 0xffffffbebfff0000 ( 250 GB)
1514[ 0.000000] .text : 0xffffff8008080000 - 0xffffff80088d0000 ( 8512 KB)
1515[ 0.000000] .rodata : 0xffffff80088d0000 - 0xffffff8008b70000 ( 2688 KB)
1516[ 0.000000] .init : 0xffffff8008b70000 - 0xffffff8008be0000 ( 448 KB)
1517[ 0.000000] .data : 0xffffff8008be0000 - 0xffffff8008c6ca00 ( 563 KB)
1518[ 0.000000] .bss : 0xffffff8008c6ca00 - 0xffffff8008ccc434 ( 383 KB)
1519[ 0.000000] fixed : 0xffffffbefe7fd000 - 0xffffffbefec00000 ( 4108 KB)
1520[ 0.000000] PCI I/O : 0xffffffbefee00000 - 0xffffffbeffe00000 ( 16 MB)
1521[ 0.000000] vmemmap : 0xffffffbf00000000 - 0xffffffc000000000 ( 4 GB maximum)
1522[ 0.000000] 0xffffffbf00000000 - 0xffffffbf01c00000 ( 28 MB actual)
1523[ 0.000000] memory : 0xffffffc000000000 - 0xffffffc080000000 ( 2048 MB)
1524[ 0.000000] Hierarchical RCU implementation.
1525[ 0.000000] Build-time adjustment of leaf fanout to 64.
1526[ 0.000000] RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=4.
1527[ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=64, nr_cpu_ids=4
1528[ 0.000000] NR_IRQS:64 nr_irqs:64 0
1529[ 0.000000] GIC: Adjusting CPU interface base to 0x00000000f902f000
1530[ 0.000000] GIC: Using split EOI/Deactivate mode
1531[ 0.000000] arm_arch_timer: Architected cp15 timer(s) running at 50.00MHz (phys).
1532[ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0xb8812736b, max_idle_ns: 440795202655 ns
1533[ 0.000002] sched_clock: 56 bits at 50MHz, resolution 20ns, wraps every 4398046511100ns
1534[ 0.008252] Console: colour dummy device 80x25
1535[ 0.012518] Calibrating delay loop (skipped), value calculated using timer frequency.. 100.00 BogoMIPS (lpj=200000)
1536[ 0.022877] pid_max: default: 32768 minimum: 301
1537[ 0.027570] Mount-cache hash table entries: 4096 (order: 3, 32768 bytes)
1538[ 0.034128] Mountpoint-cache hash table entries: 4096 (order: 3, 32768 bytes)
1539[ 0.041861] ASID allocator initialised with 65536 entries
1540[ 0.047556] zynqmp_plat_init Power management API v0.3
1541[ 0.052569] EFI services will not be available.
1542[ 0.057331] Detected VIPT I-cache on CPU1
1543[ 0.057365] CPU1: Booted secondary processor [410fd034]
1544[ 0.057623] Detected VIPT I-cache on CPU2
1545[ 0.057639] CPU2: Booted secondary processor [410fd034]
1546[ 0.057885] Detected VIPT I-cache on CPU3
1547[ 0.057901] CPU3: Booted secondary processor [410fd034]
1548[ 0.057933] Brought up 4 CPUs
1549[ 0.088219] SMP: Total of 4 processors activated.
1550[ 0.092895] CPU features: detected feature: 32-bit EL0 Support
1551[ 0.098692] CPU: All CPU(s) started at EL2
1552[ 0.102765] alternatives: patching kernel code
1553[ 0.108027] devtmpfs: initialized
1554[ 0.115559] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
1555[ 0.136577] xor: measuring software checksum speed
1556[ 0.181244] 8regs : 2543.000 MB/sec
1557[ 0.221268] 8regs_prefetch: 2266.000 MB/sec
1558[ 0.265629] 32regs : 3125.000 MB/sec
1559[ 0.305657] 32regs_prefetch: 2627.000 MB/sec
1560[ 0.310078] xor: using function: 32regs (3125.000 MB/sec)
1561[ 0.315532] pinctrl core: initialized pinctrl subsystem
1562[ 0.321214] NET: Registered protocol family 16
1563[ 0.326362] Failed to initialise IOMMU /amba/smmu@fd800000
1564[ 0.331864] vdso: 2 pages (1 code @ ffffff80088d7000, 1 data @ ffffff8008be4000)
1565[ 0.339066] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers.
1566[ 0.374357] DMA: preallocated 65536 KiB pool for atomic allocations
1567[ 0.390747] reset_zynqmp reset-controller: Xilinx zynqmp reset driver probed
1568[ 0.398229] ARM CCI_400_r1 PMU driver probed[ 0.405014] zynqmp-pinctrl ff180000.pinctrl: zynqmp pinctrl initialized
1569[ 0.435767] HugeTLB registered 2 MB page size, pre-allocated 0 pages
1570[ 0.508892] raid6: int64x1 gen() 447 MB/s
1571[ 0.580933] raid6: int64x1 xor() 486 MB/s
1572[ 0.653007] raid6: int64x2 gen() 741 MB/s
1573[ 0.724983] raid6: int64x2 xor() 661 MB/s
1574[ 0.797044] raid6: int64x4 gen() 1086 MB/s
1575[ 0.869075] raid6: int64x4 xor() 816 MB/s
1576[ 0.941127] raid6: int64x8 gen() 1266 MB/s
1577[ 1.013140] raid6: int64x8 xor() 824 MB/s
1578[ 1.085252] raid6: neonx1 gen() 797 MB/s
1579[ 1.157257] raid6: neonx1 xor() 837 MB/s
1580[ 1.229294] raid6: neonx2 gen() 1286 MB/s
1581[ 1.301331] raid6: neonx2 xor() 1143 MB/s
1582[ 1.373378] raid6: neonx4 gen() 1665 MB/s
1583[ 1.445420] raid6: neonx4 xor() 1306 MB/s
1584[ 1.517448] raid6: neonx8 gen() 1752 MB/s
1585[ 1.589492] raid6: neonx8 xor() 1348 MB/s
1586[ 1.593574] raid6: using algorithm neonx8 gen() 1752 MB/s
1587[ 1.598935] raid6: .... xor() 1348 MB/s, rmw enabled
1588[ 1.603866] raid6: using intx1 recovery algorithm
1589[ 1.609025] Write failed gate address:1000f02
1590[ 1.616933] SCSI subsystem initialized
1591[ 1.620721] usbcore: registered new interface driver usbfs
1592[ 1.626046] usbcore: registered new interface driver hub
1593[ 1.631327] usbcore: registered new device driver usb
1594[ 1.636379] media: Linux media interface: v0.10
1595[ 1.640825] Linux video capture interface: v2.00
1596[ 1.645413] pps_core: LinuxPPS API ver. 1 registered
1597[ 1.650317] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
1598[ 1.659411] PTP clock support registered
1599[ 1.663311] EDAC MC: Ver: 3.0.0
1600[ 1.666667] FPGA manager framework
1601[ 1.670014] fpga-region fpga-full: FPGA Region probed
1602[ 1.675079] Advanced Linux Sound Architecture Driver Initialized.
1603[ 1.681295] Bluetooth: Core ver 2.22
1604[ 1.684708] NET: Registered protocol family 31
1605[ 1.689097] Bluetooth: HCI device and connection manager initialized
1606[ 1.695415] Bluetooth: HCI socket layer initialized
1607[ 1.700256] Bluetooth: L2CAP socket layer initialized
1608[ 1.705283] Bluetooth: SCO socket layer initialized
1609[ 1.710710] clocksource: Switched to clocksource arch_sys_counter
1610[ 1.716728] VFS: Disk quotas dquot_6.6.0
1611[ 1.720538] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
1612[ 1.730765] NET: Registered protocol family 2
1613[ 1.735312] TCP established hash table entries: 16384 (order: 5, 131072 bytes)
1614[ 1.742435] TCP bind hash table entries: 16384 (order: 6, 262144 bytes)
1615[ 1.749221] TCP: Hash tables configured (established 16384 bind 16384)
1616[ 1.755615] UDP hash table entries: 1024 (order: 3, 32768 bytes)
1617[ 1.761549] UDP-Lite hash table entries: 1024 (order: 3, 32768 bytes)
1618[ 1.768057] NET: Registered protocol family 1
1619[ 1.772488] RPC: Registered named UNIX socket transport module.
1620[ 1.778254] RPC: Registered udp transport module.
1621[ 1.782881] RPC: Registered tcp transport module.
1622[ 1.787551] RPC: Registered tcp NFSv4.1 backchannel transport module.
1623[ 1.794109] Trying to unpack rootfs image as initramfs...
1624[ 2.117739] Freeing initrd memory: 8760K (ffffffc007771000 - ffffffc007fff000)
1625[ 2.125166] hw perfevents: enabled with armv8_pmuv3 PMU driver, 7 counters available
1626[ 2.133462] futex hash table entries: 1024 (order: 5, 131072 bytes)
1627[ 2.140130] workingset: timestamp_bits=62 max_order=19 bucket_order=0
1628[ 2.147059] NFS: Registering the id_resolver key type
1629[ 2.151938] Key type id_resolver registered
1630[ 2.156067] Key type id_legacy registered
1631[ 2.160052] nfs4filelayout_init: NFSv4 File Layout Driver Registering...
1632[ 2.166722] ntfs: driver 2.1.32 [Flags: R/W].
1633[ 2.171049] jffs2: version 2.2. (NAND) (SUMMARY) © 2001-2006 Red Hat, Inc.
1634[ 2.185733] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 247)
1635[ 2.192946] io scheduler noop registered
1636[ 2.196831] io scheduler deadline registered
1637[ 2.201072] io scheduler cfq registered (default)
1638[ 2.206328] nwl-pcie fd0e0000.pcie: Link is UP
1639[ 2.210617] OF: PCI: host bridge /amba/pcie@fd0e0000 ranges:
1640[ 2.216219] OF: PCI: MEM 0xe0000000..0xefffffff -> 0xe0000000
1641[ 2.222087] OF: PCI: MEM 0x600000000..0x7ffffffff -> 0x600000000
1642[ 2.228308] nwl-pcie fd0e0000.pcie: PCI host bridge to bus 0000:00
1643[ 2.234372] pci_bus 0000:00: root bus resource [bus 00-ff]
1644[ 2.239818] pci_bus 0000:00: root bus resource [mem 0xe0000000-0xefffffff]
1645[ 2.246650] pci_bus 0000:00: root bus resource [mem 0x600000000-0x7ffffffff pref]
1646[ 2.254582] pci 0000:00:00.0: BAR 8: assigned [mem 0xe0000000-0xe00fffff]
1647[ 2.261179] pci 0000:01:00.0: BAR 0: assigned [mem 0xe0000000-0xe00007ff]
1648[ 2.267927] pci 0000:00:00.0: PCI bridge to [bus 01-0c]
1649[ 2.273114] pci 0000:00:00.0: bridge window [mem 0xe0000000-0xe00fffff]
1650[ 2.280583] xilinx-dpdma fd4c0000.dma: Xilinx DPDMA engine is probed
1651[ 2.286962] xilinx-vdma 400000000.dma: Xilinx AXI VDMA Engine Driver Probed!!
1652[ 2.294015] xilinx-vdma 400010000.dma: Xilinx AXI VDMA Engine Driver Probed!!
1653[ 2.301163] xilinx-zynqmp-dma fd500000.dma: ZynqMP DMA driver Probe success
1654[ 2.308027] xilinx-zynqmp-dma fd510000.dma: ZynqMP DMA driver Probe success
1655[ 2.314944] xilinx-zynqmp-dma fd520000.dma: ZynqMP DMA driver Probe success
1656[ 2.321865] xilinx-zynqmp-dma fd530000.dma: ZynqMP DMA driver Probe success
1657[ 2.328789] xilinx-zynqmp-dma fd540000.dma: ZynqMP DMA driver Probe success
1658[ 2.335705] xilinx-zynqmp-dma fd550000.dma: ZynqMP DMA driver Probe success
1659[ 2.342624] xilinx-zynqmp-dma fd560000.dma: ZynqMP DMA driver Probe success
1660[ 2.349549] xilinx-zynqmp-dma fd570000.dma: ZynqMP DMA driver Probe success
1661[ 2.356504] xilinx-zynqmp-dma ffa80000.dma: ZynqMP DMA driver Probe success
1662[ 2.363389] xilinx-zynqmp-dma ffa90000.dma: ZynqMP DMA driver Probe success
1663[ 2.370302] xilinx-zynqmp-dma ffaa0000.dma: ZynqMP DMA driver Probe success
1664[ 2.377234] xilinx-zynqmp-dma ffab0000.dma: ZynqMP DMA driver Probe success
1665[ 2.384146] xilinx-zynqmp-dma ffac0000.dma: ZynqMP DMA driver Probe success
1666[ 2.391068] xilinx-zynqmp-dma ffad0000.dma: ZynqMP DMA driver Probe success
1667[ 2.397990] xilinx-zynqmp-dma ffae0000.dma: ZynqMP DMA driver Probe success
1668[ 2.404906] xilinx-zynqmp-dma ffaf0000.dma: ZynqMP DMA driver Probe success
1669[ 2.433029] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
1670[ 2.440497] ff000000.serial: ttyPS1 at MMIO 0xff000000 (irq = 46, base_baud = 6250000) is a xuartps
1671[ 2.449557] ff010000.serial: ttyPS0 at MMIO 0xff010000 (irq = 47, base_baud =·r¢ªÂ¢ÊÂêconsole [ttyPS0] enabled
1672[ 2.458498] console [ttyPS0] enabled
1673[ 2.465462] bootconsole [cdns0] disabled
1674[ 2.465462] bootconsole [cdns0] disabled
1675[ 2.473545] Unable to detect cache hierarchy from DT for CPU 0
1676[ 2.483891] brd: module loaded
1677[ 2.489704] loop: module loaded
1678[ 2.493683] ahci-ceva fd0c0000.ahci: AHCI 0001.0301 32 slots 2 ports 6 Gbps 0x3 impl platform mode
1679[ 2.502559] ahci-ceva fd0c0000.ahci: flags: 64bit ncq sntf pm clo only pmp fbs pio slum part ccc sds apst
1680[ 2.513325] scsi host0: ahci-ceva
1681[ 2.516750] scsi host1: ahci-ceva
1682[ 2.520084] ata1: SATA max UDMA/133 mmio [mem 0xfd0c0000-0xfd0c1fff] port 0x100 irq 43
1683[ 2.527916] ata2: SATA max UDMA/133 mmio [mem 0xfd0c0000-0xfd0c1fff] port 0x180 irq 43
1684[ 2.535965] mtdoops: mtd device (mtddev=name/number) must be supplied
1685[ 2.543330] zynqmp-qspi ff0f0000.spi: rx bus width not found
1686[ 2.549274] m25p80 spi0.0: found n25q00, expected n25q512a
1687[ 2.554978] m25p80 spi0.0: n25q00 (131072 Kbytes)
1688[ 2.559616] 5 ofpart partitions found on MTD device spi0.0
1689[ 2.565070] Creating 5 MTD partitions on "spi0.0":
1690[ 2.569842] 0x000000000000-0x000000500000 : "boot"
1691[ 2.575113] 0x000000500000-0x000000540000 : "bootenv"
1692[ 2.580524] 0x000000540000-0x000002740000 : "kernel"
1693[ 2.585813] 0x000002740000-0x000003740000 : "user"
1694[ 2.590958] 0x000003740000-0x000003750000 : "test"
1695[ 2.596985] libphy: Fixed MDIO Bus: probed
1696[ 2.602134] tun: Universal TUN/TAP device driver, 1.6
1697[ 2.607104] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
1698[ 2.613385] CAN device driver interface
1699[ 2.617709] macb ff0c0000.ethernet: Not enabling partial store and forward
1700[ 2.625018] libphy: MACB_mii_bus: probed
1701[ 2.702981] macb ff0c0000.ethernet eth0: Cadence GEM rev 0x50070106 at 0xff0c0000 irq 30 (00:0a:35:00:22:01)
1702[ 2.712725] Marvell 88E1510 ff0c0000.etherne:00: attached PHY driver [Marvell 88E1510] (mii_bus:phy_addr=ff0c0000.etherne:00, irq=-1)
1703[ 2.725321] usbcore: registered new interface driver asix
1704[ 2.730686] usbcore: registered new interface driver ax88179_178a
1705[ 2.736733] usbcore: registered new interface driver cdc_ether
1706[ 2.742551] usbcore: registered new interface driver net1080
1707[ 2.748194] usbcore: registered new interface driver cdc_subset
1708[ 2.754094] usbcore: registered new interface driver zaurus
1709[ 2.759663] usbcore: registered new interface driver cdc_ncm
1710[ 2.765624] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
1711[ 2.772066] ehci-pci: EHCI PCI platform driver
1712[ 2.776721] usbcore: registered new interface driver uas
1713[ 2.781980] usbcore: registered new interface driver usb-storage
1714[ 2.788239] mousedev: PS/2 mouse device common for all mice
1715[ 2.794178] rtc_zynqmp ffa60000.rtc: rtc core: registered ffa60000.rtc as rtc0
1716[ 2.801350] i2c /dev entries driver
1717[ 2.804986] cdns-i2c ff020000.i2c: 400 kHz mmio ff020000 irq 32
1718[ 2.811068] cdns-i2c ff030000.i2c: 400 kHz mmio ff030000 irq 33
1719[ 2.817855] usbcore: registered new interface driver uvcvideo
1720[ 2.823538] USB Video Class driver (1.1.1)
1721[ 2.827953] Bluetooth: HCI UART driver ver 2.3
1722[ 2.832318] Bluetooth: HCI UART protocol H4 registered
1723[ 2.837434] Bluetooth: HCI UART protocol BCSP registered
1724[ 2.842729] Bluetooth: HCI UART protocol LL registered
1725[ 2.847849] Bluetooth: HCI UART protocol ATH3K registered
1726[ 2.848913] ata2: SATA link down (SStatus 0 SControl 330)
1727[ 2.858613] Bluetooth: HCI UART protocol Three-wire (H5) registered
1728[ 2.864898] Bluetooth: HCI UART protocol Intel registered
1729[ 2.870279] Bluetooth: HCI UART protocol Broadcom registered
1730[ 2.875886] Bluetooth: HCI UART protocol QCA registered
1731[ 2.881130] usbcore: registered new interface driver bcm203x
1732[ 2.886768] usbcore: registered new interface driver bpa10x
1733[ 2.892322] usbcore: registered new interface driver bfusb
1734[ 2.897792] usbcore: registered new interface driver btusb
1735[ 2.903228] Bluetooth: Generic Bluetooth SDIO driver ver 0.1
1736[ 2.908924] usbcore: registered new interface driver ath3k
1737[ 2.914459] EDAC MC: ECC not enabled
1738[ 2.918089] EDAC DEVICE0: Giving out device to module edac controller cache_err: DEV edac (POLLED)
1739[ 2.927120] EDAC DEVICE1: Giving out device to module zynqmp-ocm-edac controller zynqmp_ocm: DEV ff960000.memory-controller (INTERRUPT)
1740[ 2.939412] sdhci: Secure Digital Host Controller Interface driver
1741[ 2.945508] sdhci: Copyright(c) Pierre Ossman
1742[ 2.949848] sdhci-pltfm: SDHCI platform and OF driver helper
1743[ 3.002716] mmc0: SDHCI controller on ff160000.sdhci [ff160000.sdhci] using ADMA 64-bit
1744[ 3.010721] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 330)
1745[ 3.017453] ledtrig-cpu: registered to indicate activity on CPUs
1746[ 3.023509] usbcore: registered new interface driver usbhid
1747[ 3.028992] usbhid: USB HID core driver
1748[ 3.034386] fpga_manager fpga0: Xilinx ZynqMP FPGA Manager registered
1749[ 3.041276] xilinx-dp-snd-pcm dp_snd_pcm0: Xilinx DisplayPort Sound PCM probed
1750[ 3.048439] xilinx-dp-snd-pcm dp_snd_pcm1: Xilinx DisplayPort Sound PCM probed
1751[ 3.055800] PLL: shutdown
1752[ 3.059238] Write failed to divider address:fd1a007c
1753[ 3.064270] PLL: enable
1754[ 3.066795] xilinx-dp-snd-codec dp_snd_codec0: Xilinx DisplayPort Sound Codec probed
1755[ 3.074838] xilinx-dp-snd-card dp_snd_card: xilinx-dp-snd-codec-dai <-> xilinx-dp-snd-codec-dai mapping ok
1756[ 3.084509] xilinx-dp-snd-card dp_snd_card: xilinx-dp-snd-codec-dai <-> xilinx-dp-snd-codec-dai mapping ok
1757[ 3.094348] xilinx-dp-snd-card dp_snd_card: Xilinx DisplayPort Sound Card probed
1758[ 3.101762] pktgen: Packet Generator for packet performance testing. Version: 2.75
1759[ 3.109662] Netfilter messages via NETLINK v0.30.
1760[ 3.114407] ip_tables: (C) 2000-2006 Netfilter Core Team
1761[ 3.119681] Initializing XFRM netlink socket
1762[ 3.124049] NET: Registered protocol family 10
1763[ 3.129912] ip6_tables: (C) 2000-2006 Netfilter Core Team
1764[ 3.135272] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver
1765[ 3.141495] NET: Registered protocol family 17
1766[ 3.145864] NET: Registered protocol family 15
1767[ 3.150293] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this.
1768[ 3.163214] Ebtables v2.0 registered
1769[ 3.166826] can: controller area network core (rev 20120528 abi 9)
1770[ 3.172969] NET: Registered protocol family 29
1771[ 3.177362] can: raw protocol (rev 20120528)
1772[ 3.181613] can: broadcast manager protocol (rev 20161123 t)
1773[ 3.187257] can: netlink gateway (rev 20130117) max_hops=1
1774[ 3.192783] Bluetooth: RFCOMM TTY layer initialized
1775[ 3.197591] Bluetooth: RFCOMM socket layer initialized
1776[ 3.202715] Bluetooth: RFCOMM ver 1.11
1777[ 3.206446] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
1778[ 3.211734] Bluetooth: BNEP filters: protocol multicast
1779[ 3.216944] Bluetooth: BNEP socket layer initialized
1780[ 3.221888] Bluetooth: HIDP (Human Interface Emulation) ver 1.2
1781[ 3.227793] Bluetooth: HIDP socket layer initialized
1782[ 3.232917] 9pnet: Installing 9P2000 support
1783[ 3.237115] Key type dns_resolver registered
1784[ 3.241762] registered taskstats version 1
1785[ 3.246160] Btrfs loaded, crc32c=crc32c-generic
1786[ 3.257805] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller
1787[ 3.263242] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 1
1788[ 3.271107] xhci-hcd xhci-hcd.0.auto: hcc params 0x0238f625 hci version 0x100 quirks 0x02010010
1789[ 3.279755] xhci-hcd xhci-hcd.0.auto: irq 229, io mem 0xfe300000
1790[ 3.285826] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
1791[ 3.292530] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
1792[ 3.299732] usb usb1: Product: xHCI Host Controller
1793[ 3.304591] usb usb1: Manufacturer: Linux 4.9.0 xhci-hcd
1794[ 3.309886] usb usb1: SerialNumber: xhci-hcd.0.auto
1795[ 3.315058] hub 1-0:1.0: USB hub found
1796[ 3.318742] hub 1-0:1.0: 1 port detected
1797[ 3.322648] ata1.00: ATA-8: ST9250315AS, 0002SDM1, max UDMA/133
1798[ 3.328533] ata1.00: 488397168 sectors, multi 16: LBA48 NCQ (depth 31/32)
1799[ 3.335438] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller
1800[ 3.340848] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 2
1801[ 3.348539] usb usb2: We don't know the algorithms for LPM for this host, disabling LPM.
1802[ 3.356605] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003
1803[ 3.363322] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
1804[ 3.370527] usb usb2: Product: xHCI Host Controller
1805[ 3.370863] ata1.00: configured for UDMA/133
1806[ 3.371156] scsi 0:0:0:0: Direct-Access ATA ST9250315AS SDM1 PQ: 0 ANSI: 5
1807[ 3.387711] usb usb2: Manufacturer: Linux 4.9.0 xhci-hcd
1808[ 3.393005] usb usb2: SerialNumber: xhci-hcd.0.auto
1809[ 3.398085] hub 2-0:1.0: USB hub found
1810[ 3.401763] hub 2-0:1.0: 1 port detected
1811[ 3.406050] rtc_zynqmp ffa60000.rtc: setting system clock to 2018-07-26 09:01:04 UTC (1532595664)
1812[ 3.414949] clk: Not disabling unused clocks
1813[ 3.419137] ALSA device list:
1814[ 3.422078] #0: DisplayPort monitor
1815[ 3.462996] sd 0:0:0:0: [sda] 488397168 512-byte logical blocks: (250 GB/233 GiB)
1816[ 3.470485] sd 0:0:0:0: [sda] Write Protect is off
1817[ 3.475239] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
1818[ 3.508871] sda: sda1
1819[ 3.511655] sd 0:0:0:0: [sda] Attached SCSI disk
1820[ 3.516376] Freeing unused kernel memory: 448K (ffffffc000b70000 - ffffffc000be0000)
1821INIT: version 2.88 booting
1822Starting udev
1823[ 3.629384] udevd[1622]: starting version 3.2
1824[ 3.634071] random: udevd: uninitialized urandom read (16 bytes read)
1825[ 3.640535] random: udevd: uninitialized urandom read (16 bytes read)
1826[ 3.646947] random: udevd: uninitialized urandom read (16 bytes read)
1827[ 3.653342] random: udevd: uninitialized urandom read (16 bytes read)
1828[ 3.663360] udevd[1623]: starting eudev-3.2
1829[ 3.701707] random: udevd: uninitialized urandom read (16 bytes read)
1830[ 3.708129] random: udevd: uninitialized urandom read (16 bytes read)
1831[ 3.723256] random: udevd: uninitialized urandom read (16 bytes read)
1832[ 3.733534] random: udevd: uninitialized urandom read (16 bytes read)
1833[ 3.743113] 4fm: loading out-of-tree module taints kernel.
1834[ 3.749683] pci 0000:00:00.0: enabling device (0000 -> 0002)
1835[ 3.755328] 4FM 0000:01:00.0: enabling device (0000 -> 0002)
1836[ 3.760971] Accessing 47232 of total 1 entries in dev->bar
1837[ 3.762213] <dma1> init: registered
1838[ 3.769916] dev->bar[u].virt_address:cf3d07c value:38011121
1839[ 3.775419] dev->bar[u].virt_address:cf3d080 value:deadbeef
1840[ 3.781001] dev->bar[u].virt_address:cf3d084 value:baadf00d
1841[ 3.786568] dev->bar[u].virt_address:cf3d088 value:eba00eba
1842[ 3.792082] dev->bar[u].virt_address:cf3d08c value:beefdeaf
1843[ 3.800593] /media/yocto4/vp880/VP88x_2017_3_PRJ0191/build/tmp/work/plnx_aarch64-xilinx-linux/4fm/1.0-r0/4fm.c: found 1 devices
1844[ 3.804050] <dma2> init: registered
1845Populating dev cache
1846[ 4.429621] random: dd: uninitialized urandom read (512 bytes read)
1847Starting internet superserver: inetd.
1848Running postinst /etc/rpm-postinsts/100-sysvinit-inittab...
1849update-rc.d: /etc/init.d/run-postinsts exists during rc.d purge (continuing)
1850INIT: Entering runlevel: 5
1851Hello World
1852[22]:0x12
1853[20]:0x201
1854[20]:0x201
1855[22]:0x1
1856[0]:0x140
1857[0]:0x140
1858Configuring network interfaces... [ 4.720846] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
1859done.
1860Starting Dropbear SSH server: [ 4.749613] random: dropbearkey: uninitialized urandom read (32 bytes read)
1861Generating key, this may take a while...
1862[ 5.746823] macb ff0c0000.ethernet eth0: link up (1000/Full)
1863[ 5.752431] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
1864Public key portion is:
1865ssh-rsa AAAAB3NzaC1yc2EAAAADAQABAAABAQDKemropGANgZZK3yRkO1dw83u0WPq6tLUIObosRKMn2k7WrLWC26yzh92qHIh5zbdeLVxQ9JjccvlZVx2ZAUKx9B8zZUuY0btp/uCZJUEFI/0nsiFM3sC/5e6JVAzYsVGN2+j74CpWAM+cb39mdrdEkV/lij1S4ds023fvslwwjEUyODI05TBwOhaFW8AylhbrKFK78WCLXD5Nx69YxAGyIF5ZBWdjM1KFCdjL29csEmt1D1VV1Npbs4ftiKd8OdytY4vFWlO69GX12bToi7+4Qto8p0+XcGGw7BrzKvvJLqMfS1kx/XK4RMnPIC0BBoeH9CJha7oszX5LWF4c7bCH root@VP88x_2017_3_PRJ0191
1866Fingerprint: md5 3d:8e:d0:a0:4b:4f:29:3d:73:2d:e1:59:9d:d5:f6:98
1867dropbear.
1868Starting syslogd/klogd: done
1869[ 6.960737] random: fast init done
1870[ 7.320887] random: crng init done
1871mount[ 9.238353] jffs2: notice: (2113) jffs2_build_xattr_subsystem: complete building xattr subsystem, 0 of xdatum (0 unchecked, 0 orphan) and 0 of xref (0 dead, 0 orphan) found.
1872hello world.....
1873Starting tcf-agent: OK
1874
1875root@VP88x_2017_3_PRJ0191:~#
1876root@VP88x_2017_3_PRJ0191:~# mount
1877rootfs on / type rootfs (rw,size=759564k,nr_inodes=189891)
1878proc on /proc type proc (rw,relatime)
1879sysfs on /sys type sysfs (rw,relatime)
1880debugfs on /sys/kernel/debug type debugfs (rw,relatime)
1881devtmpfs on /dev type devtmpfs (rw,relatime,size=759564k,nr_inodes=189891,mode=755)
1882tmpfs on /run type tmpfs (rw,nosuid,nodev,mode=755)
1883tmpfs on /var/volatile type tmpfs (rw,relatime)
1884/dev/sda1 on /run/media/sda1 type vfat (rw,relatime,gid=6,fmask=0007,dmask=0007,allow_utime=0020,codepage=437,iocharset=iso8859-1,shortname=mixed,errors=remount-ro)
1885devpts on /dev/pts type devpts (rw,relatime,gid=5,mode=620,ptmxmode=000)
1886/dev/mtdblock3 on /mnt type jffs2 (rw,relatime)
1887root@VP88x_2017_3_PRJ0191:~# mount | grep sd
1888/dev/sda1 on /run/media/sda1 type vfat (rw,relatime,gid=6,fmask=0007,dmask=0007,allow_utime=0020,codepage=437,iocharset=iso8859-1,shortname=mixed,errors=remount-ro)
1889root@VP88x_2017_3_PRJ0191:~# ls /run/media/sda1/
1890root@VP88x_2017_3_PRJ0191:~# cd /tmp
1891root@VP88x_2017_3_PRJ0191:/tmp# ls
1892diagnostic.elf
1893root@VP88x_2017_3_PRJ0191:/tmp# chmod +x *
1894root@VP88x_2017_3_PRJ0191:/tmp# ./diagnostic.elf
1895enter number of cyclic (0 - for infinite)
18961
1897SPI1 result = 0 SUCCESS
1898Opened device VP880. PCIe read from CID 0x2000: 2f70013
1899PCIe result = 0 SUCCESS
1900
1901--- AMS zynq PS System monitor---
1902temperature ps 52.75C
1903vcc_psintlp 0.87V
1904vcc_psintfp 0.87V
1905vcc_psaux 1.81V
1906vcc_psddr_504 1.21V
1907vcc_psio3_503 3.24V
1908vcc_psio0_500 3.24V
1909vcc_psio1_501 1.80V
1910vcc_psio2_502 1.80V
1911vcc_psmgtravcc 0.87V
1912vcc_psmgtravtt 1.81V
1913---------------------------------
1914
1915--- AMS zynq PL System monitor---
1916temperature pl 50.90C
1917vcc_int 0.87V
1918vcc_aux 1.81V
1919vcc_bram 0.87V
1920vcc_psintlp 0.87V
1921vcc_psintfp 0.87V
1922vcc_psaux 1.82V
1923vcc_vuser1 0.00V
1924vcc_vuser2 0.00V
1925vcc_vuser3 0.00V
1926vcc_vuser4 0.00V
1927---------------------------------
1928ranran.............temperature 28 C
1929vmon_fmc_vadj 1.79V
1930vmon_fmc_viob 1.79V
1931vmon_sblast_vcore 1.64V
1932vmon_sblast_vio 1.48V
1933vmon_2v5_mgt_refclk 2.44V
1934vmon_3v3_mgt_refclk 3.23V
1935vmon_1v2 1.18V
1936vmon_1v4 1.40V
1937vmon_vaux 3.32V
1938VPX_SYS_RST_N :1
1939PS_ERROR_STATUS :1
1940PS_ERROR_OUT :1
1941PS_INIT_B :1
1942PS_DONE :1
1943INIT_B :1
1944DONE :1
1945FLASH_A26 :1
1946HSC_12V_PG :1
1947HSC_5V_PG :1
1948VPX_GAP :1
1949VPX_GA4 :1
1950VPX_GA3 :1
1951VPX_GA2 :1
1952VPX_GA1 :1
1953VPX_GA0 :1
1954PG_LED_N :1
1955ZYNQ_CONFDONE_LED :1
1956FPGA_CONFDONE_LED :1
1957FMC_VADJ_VS0 :1
1958FMC_VADJ_VS1 :1
1959FMC_VADJ_VS2 :1
1960VADJ_FMC_EN_L :1
1961FMC_BYPASS :1
1962HSC_ON :1
1963HSC_3V3_PG :1
1964PG_C2M_3V3 :1
1965MGT_PG :1
1966DDR4_VTT_PG :1
1967DDR4_PG :1
1968PG_FPGA_CORE :1
19691V8_LOC_2V5_VPP_PG :1
1970HSC Source channel 1 3.250V
1971HSC Source channel 2 5.031V
1972HSC ADIN channel 1 0.423V
1973HSC ADIN channel 2 0.423V
1974HSC Sense channel 1 14.625mV
1975HSC Current channel 1 2.925A
1976HSC Sense channel 2 2.625mV
1977HSC Current channel 2 0.875A
1978HSC Power channel 1 9.506W
1979HSC Power channel 2 4.402W
1980---------------------------------------------------
1981HSC Source channel 1 2.500V
1982HSC Source channel 2 11.906V
1983HSC ADIN channel 1 0.423V
1984HSC ADIN channel 2 0.423V
1985HSC Sense channel 1 0.000mV
1986HSC Current channel 1 0.000A
1987HSC Sense channel 2 4.438mV
1988HSC Current channel 2 0.888A
1989HSC Power channel 1 0.000W
1990HSC Power channel 2 10.567W
1991---------------------------------------------------
1992HOSTIF version 1.0.0.5
1993read fpga values
1994temp_pl 46.883728
1995vcc_int 0.955078
1996vcc_aux 1.801758
1997vcc_bram 0.955078
1998vcc_vuser0 1.500000
1999vcc_vuser1 1.186523
2000vcc_vuser2 0.000000
2001vcc_vuser3 0.000000
2002MMC result =SUCCESS
2003PING 192.168.1.20 (192.168.1.20): 56 data bytes
2004
2005--- 192.168.1.20 ping statistics ---
20061 packets transmitted, 0 packets received, 100% packet loss
2007Ethernet result = 256 FAILED
2008UnitAPI version : 1.3.8 : Enumerating units in the system, please wait...
2009
2010Global Units:
2011Global Unit 0 is on Device 'VP880' (P0): Internal Unit 0 is star 0x01C4 (axi_vp880_8l_host_if) with index 1 of star type 0x000D (Host Interface)
2012Global Unit 1 is on Device 'VP880' (P0): Internal Unit 1 is star 0x0203 (Unknown) with index 0 of star type 0x0005 (ADC)
2013Global Unit 2 is on Device 'VP880' (P0): Internal Unit 2 is star 0x015C (axi_intrc16) with index 0 of star type 0x0014 (Interrupt Controller)
2014Global Unit 3 is on Device 'VP880' (P0): Internal Unit 3 is star 0x014C (axi_i2c_master) with index 0 of star type 0x000E (3rd Party Logic)
2015Global Unit 4 is on Device 'VP880' (P0): Internal Unit 4 is star 0x0202 (Unknown) with index 0 of star type 0x0003 (Memory FIFO)
2016Global Unit 5 is on Device 'VP880' (P0): Internal Unit 5 is star 0x01C5 (axi_vp880_ddr4_fifo) with index 0 of star type 0x0003 (Memory FIFO)
2017
2018
2019Running 'VP880-FMC134' on PCIe, CID725
2020
2021-----------------------------------------------------------
2022Device 'VP880' (P0)
2023-----------------------------------------------------------
2024Constellation ID : 759
2025Number Of Stars : 19
2026Software Build Code: 1524177589 (Thu Apr 19 22:39:49 2018)
2027Firmware Build Code: 0
2028Firmware Revision : 1.2
2029-----------------------------------------------------------
2030
2031FMC detected
2032FMC result = 0 SUCCESS
2033memory test: OK
2034Memory result = 0 SUCCESS
2035DISK: OK
2036DISK result = 0 SUCCESS
2037FLASH: OK
2038FLASH result = 0 SUCCESS
2039read returned 9
2040RFFE result = 0 SUCCESS
2041root@VP88x_2017_3_PRJ0191:/tmp# ifconfig
2042eth0 Link encap:Ethernet HWaddr 00:0A:35:00:22:01
2043 inet addr:192.168.1.10 Bcast:192.168.1.255 Mask:255.255.255.0
2044 inet6 addr: fe80::20a:35ff:fe00:2201%4879712/64 Scope:Link
2045 UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
2046 RX packets:444 errors:0 dropped:0 overruns:0 frame:0
2047 TX packets:357 errors:0 dropped:0 overruns:0 carrier:0
2048 collisions:0 txqueuelen:1000
2049 RX bytes:554991 (541.9 KiB) TX bytes:26233 (25.6 KiB)
2050 Interrupt:30
2051
2052lo Link encap:Local Loopback
2053 inet addr:127.0.0.1 Mask:255.0.0.0
2054 inet6 addr: ::1%4879712/128 Scope:Host
2055 UP LOOPBACK RUNNING MTU:65536 Metric:1
2056 RX packets:4 errors:0 dropped:0 overruns:0 frame:0
2057 TX packets:4 errors:0 dropped:0 overruns:0 carrier:0
2058 collisions:0 txqueuelen:1
2059 RX bytes:200 (200.0 B) TX bytes:200 (200.0 B)
2060
2061root@VP88x_2017_3_PRJ0191:/tmp# ping 192.168.1.20
2062PING 192.168.1.20 (192.168.1.20): 56 data bytes
2063^C
2064--- 192.168.1.20 ping statistics ---
206520 packets transmitted, 0 packets received, 100% packet loss
2066root@VP88x_2017_3_PRJ0191:/tmp# ping 192.168.1.20
2067PING 192.168.1.20 (192.168.1.20): 56 data bytes
2068^C
2069--- 192.168.1.20 ping statistics ---
20701 packets transmitted, 0 packets received, 100% packet loss
2071root@VP88x_2017_3_PRJ0191:/tmp# ping 192.168.1.10
2072PING 192.168.1.10 (192.168.1.10): 56 data bytes
207364 bytes from 192.168.1.10: seq=0 ttl=64 time=0.159 ms
2074^C
2075--- 192.168.1.10 ping statistics ---
20761 packets transmitted, 1 packets received, 0% packet loss
2077round-trip min/avg/max = 0.159/0.159/0.159 ms
2078root@VP88x_2017_3_PRJ0191:/tmp# ifconfig
2079eth0 Link encap:Ethernet HWaddr 00:0A:35:00:22:01
2080 inet addr:192.168.1.10 Bcast:192.168.1.255 Mask:255.255.255.0
2081 inet6 addr: fe80::20a:35ff:fe00:2201%4879712/64 Scope:Link
2082 UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
2083 RX packets:474 errors:0 dropped:0 overruns:0 frame:0
2084 TX packets:409 errors:0 dropped:0 overruns:0 carrier:0
2085 collisions:0 txqueuelen:1000
2086 RX bytes:561372 (548.2 KiB) TX bytes:36177 (35.3 KiB)
2087 Interrupt:30
2088
2089lo Link encap:Local Loopback
2090 inet addr:127.0.0.1 Mask:255.0.0.0
2091 inet6 addr: ::1%4879712/128 Scope:Host
2092 UP LOOPBACK RUNNING MTU:65536 Metric:1
2093 RX packets:6 errors:0 dropped:0 overruns:0 frame:0
2094 TX packets:6 errors:0 dropped:0 overruns:0 carrier:0
2095 collisions:0 txqueuelen:1
2096 RX bytes:368 (368.0 B) TX bytes:368 (368.0 B)
2097
2098root@VP88x_2017_3_PRJ0191:/tmp# ping 192.168.1.10
2099PING 192.168.1.10 (192.168.1.10): 56 data bytes
210064 bytes from 192.168.1.10: seq=0 ttl=64 time=0.142 ms
2101^C
2102--- 192.168.1.10 ping statistics ---
21031 packets transmitted, 1 packets received, 0% packet loss
2104round-trip min/avg/max = 0.142/0.142/0.142 ms
2105root@VP88x_2017_3_PRJ0191:/tmp# ping 192.168.1.20
2106PING 192.168.1.20 (192.168.1.20): 56 data bytes
2107^C
2108--- 192.168.1.20 ping statistics ---
210927 packets transmitted, 0 packets received, 100% packet loss
2110root@VP88x_2017_3_PRJ0191:/tmp#
2111root@VP88x_2017_3_PRJ0191:/tmp#
2112root@VP88x_2017_3_PRJ0191:/tmp#
2113root@VP88x_2017_3_PRJ0191:/tmp#
2114root@VP88x_2017_3_PRJ0191:/tmp# ping 192.168.1.20
2115PING 192.168.1.20 (192.168.1.20): 56 data bytes
2116^C
2117--- 192.168.1.20 ping statistics ---
21181 packets transmitted, 0 packets received, 100% packet loss
2119root@VP88x_2017_3_PRJ0191:/tmp# ping 192.168.1.20
2120PING 192.168.1.20 (192.168.1.20): 56 data bytes
2121Xilinx Zynq MP First Stage Boot Loader
2122Release 2017.3 May 24 2018 - 10:35:53
2123Marvell PHY reset
2124SI5338 0x70 not configured
2125SI5338 0x70 configuration finished
2126SI5338 0x71 not configured
2127SI5338 0x71 configuration finished
2128
2129
2130U-Boot 2017.01 (Jul 26 2018 - 02:50:11 -0600) Xilinx ZynqMP ZCU102 revB
2131
2132I2C: ready
2133DRAM: 2 GiB
2134EL Level: EL2
2135Chip ID: xczu3eg
2136MMC: Card did not respond to voltage select!
2137sdhci@ff160000 - probe failed: -95
2138Card did not respond to voltage select!
2139
2140zynqmp_qspi_ofdata_to_platdata: CLK 300000000
2141SF: Detected n25q1024 with page size 256 Bytes, erase size 64 KiB, total 128 MiB
2142*** Warning - bad CRC, using default environment
2143
2144In: serial
2145Out: serial
2146Err: serial
2147Bootmode: QSPI_MODE
2148Net: ZYNQ GEM: ff0c0000, phyaddr c, interface rgmii-id
2149eth0: ethernet@ff0c0000
2150U-BOOT for VP88x_2017_3_PRJ0191
2151
2152Hit any key to stop autoboot: 0
2153SF: Detected n25q1024 with page size 256 Bytes, erase size 64 KiB, total 128 MiB
2154device 0 offset 0x540000, size 0x2200000
2155SF: 35651584 bytes @ 0x540000 Read: OK
2156## Loading kernel from FIT Image at 10000000 ...
2157 Using 'conf@1' configuration
2158 Trying 'kernel@0' kernel subimage
2159 Description: Linux Kernel
2160 Type: Kernel Image
2161 Compression: uncompressed
2162 Data Start: 0x100000d8
2163 Data Size: 12503552 Bytes = 11.9 MiB
2164 Architecture: AArch64
2165 OS: Linux
2166 Load Address: 0x00080000
2167 Entry Point: 0x00080000
2168 Hash algo: sha1
2169 Hash value: 6738559f9c7602fa2a0ff36fdfc8cf5b9b3e6565
2170 Verifying Hash Integrity ... sha1+ OK
2171## Loading ramdisk from FIT Image at 10000000 ...
2172 Using 'conf@1' configuration
2173 Trying 'ramdisk@0' ramdisk subimage
2174 Description: ramdisk
2175 Type: RAMDisk Image
2176 Compression: uncompressed
2177 Data Start: 0x10bf54e4
2178 Data Size: 8973721 Bytes = 8.6 MiB
2179 Architecture: AArch64
2180 OS: Linux
2181 Load Address: unavailable
2182 Entry Point: unavailable
2183 Hash algo: sha1
2184 Hash value: 4b595c4e0c42ac8967d3d732b389c6521f0b492f
2185 Verifying Hash Integrity ... sha1+ OK
2186## Loading fdt from FIT Image at 10000000 ...
2187 Using 'conf@1' configuration
2188 Trying 'fdt@0' fdt subimage
2189 Description: Flattened Device Tree blob
2190 Type: Flat Device Tree
2191 Compression: uncompressed
2192 Data Start: 0x10becbd0
2193 Data Size: 34910 Bytes = 34.1 KiB
2194 Architecture: AArch64
2195 Hash algo: sha1
2196 Hash value: 20fc450d3d82f1967aba254f93c3704b6f5d1f6e
2197 Verifying Hash Integrity ... sha1+ OK
2198 Booting using the fdt blob at 0x10becbd0
2199 Loading Kernel Image ... OK
2200 Loading Ramdisk to 07771000, end 07fffd99 ... OK
2201 Loading Device Tree to 0000000007765000, end 000000000777085d ... OK
2202
2203Starting kernel ...
2204
2205[ 0.000000] Booting Linux on physical CPU 0x0
2206[ 0.000000] Linux version 4.9.0 (user@user-VirtualBox) (gcc version 6.2.1 20161016 (Linaro GCC 6.2-2016.11) ) #1 SMP Thu Jul 26 01:50:46 MDT 2018
2207[ 0.000000] Boot CPU: AArch64 Processor [410fd034]
2208[ 0.000000] earlycon: cdns0 at MMIO 0x00000000ff010000 (options '115200n8')
2209[ 0.000000] bootconsole [cdns0] enabled
2210[ 0.000000] efi: Getting EFI parameters from FDT:
2211[ 0.000000] efi: UEFI not found.
2212[ 0.000000] cma: Reserved 512 MiB at 0x0000000060000000
2213[ 0.000000] psci: probing for conduit method from DT.
2214[ 0.000000] psci: PSCIv1.0 detected in firmware.
2215[ 0.000000] psci: Using standard PSCI v0.2 function IDs
2216[ 0.000000] psci: MIGRATE_INFO_TYPE not supported.
2217[ 0.000000] percpu: Embedded 21 pages/cpu @ffffffc05ff76000 s46232 r8192 d31592 u86016
2218[ 0.000000] Detected VIPT I-cache on CPU0
2219[ 0.000000] CPU features: enabling workaround for ARM erratum 845719
2220[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 517120
2221[ 0.000000] Kernel command line: console=ttyPS0,115200 earlyprintk earlycon=cdns,mmio,0xFF010000,115200n8 uio_pdrv_genirq.of_id=generic-uio clk_ignore_unused cma=512M coherent_pool=64MiB
2222[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
2223[ 0.000000] Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes)
2224[ 0.000000] Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes)
2225[ 0.000000] Memory: 1519128K/2097152K available (8508K kernel code, 562K rwdata, 2636K rodata, 448K init, 382K bss, 53736K reserved, 524288K cma-reserved)
2226[ 0.000000] Virtual kernel memory layout:
2227[ 0.000000] modules : 0xffffff8000000000 - 0xffffff8008000000 ( 128 MB)
2228[ 0.000000] vmalloc : 0xffffff8008000000 - 0xffffffbebfff0000 ( 250 GB)
2229[ 0.000000] .text : 0xffffff8008080000 - 0xffffff80088d0000 ( 8512 KB)
2230[ 0.000000] .rodata : 0xffffff80088d0000 - 0xffffff8008b70000 ( 2688 KB)
2231[ 0.000000] .init : 0xffffff8008b70000 - 0xffffff8008be0000 ( 448 KB)
2232[ 0.000000] .data : 0xffffff8008be0000 - 0xffffff8008c6ca00 ( 563 KB)
2233[ 0.000000] .bss : 0xffffff8008c6ca00 - 0xffffff8008ccc434 ( 383 KB)
2234[ 0.000000] fixed : 0xffffffbefe7fd000 - 0xffffffbefec00000 ( 4108 KB)
2235[ 0.000000] PCI I/O : 0xffffffbefee00000 - 0xffffffbeffe00000 ( 16 MB)
2236[ 0.000000] vmemmap : 0xffffffbf00000000 - 0xffffffc000000000 ( 4 GB maximum)
2237[ 0.000000] 0xffffffbf00000000 - 0xffffffbf01c00000 ( 28 MB actual)
2238[ 0.000000] memory : 0xffffffc000000000 - 0xffffffc080000000 ( 2048 MB)
2239[ 0.000000] Hierarchical RCU implementation.
2240[ 0.000000] Build-time adjustment of leaf fanout to 64.
2241[ 0.000000] RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=4.
2242[ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=64, nr_cpu_ids=4
2243[ 0.000000] NR_IRQS:64 nr_irqs:64 0
2244[ 0.000000] GIC: Adjusting CPU interface base to 0x00000000f902f000
2245[ 0.000000] GIC: Using split EOI/Deactivate mode
2246[ 0.000000] arm_arch_timer: Architected cp15 timer(s) running at 50.00MHz (phys).
2247[ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0xb8812736b, max_idle_ns: 440795202655 ns
2248[ 0.000003] sched_clock: 56 bits at 50MHz, resolution 20ns, wraps every 4398046511100ns
2249[ 0.008251] Console: colour dummy device 80x25
2250[ 0.012518] Calibrating delay loop (skipped), value calculated using timer frequency.. 100.00 BogoMIPS (lpj=200000)
2251[ 0.022878] pid_max: default: 32768 minimum: 301
2252[ 0.027568] Mount-cache hash table entries: 4096 (order: 3, 32768 bytes)
2253[ 0.034129] Mountpoint-cache hash table entries: 4096 (order: 3, 32768 bytes)
2254[ 0.041863] ASID allocator initialised with 65536 entries
2255[ 0.047561] zynqmp_plat_init Power management API v0.3
2256[ 0.052577] EFI services will not be available.
2257[ 0.057340] Detected VIPT I-cache on CPU1
2258[ 0.057373] CPU1: Booted secondary processor [410fd034]
2259[ 0.057636] Detected VIPT I-cache on CPU2
2260[ 0.057653] CPU2: Booted secondary processor [410fd034]
2261[ 0.057903] Detected VIPT I-cache on CPU3
2262[ 0.057920] CPU3: Booted secondary processor [410fd034]
2263[ 0.057952] Brought up 4 CPUs
2264[ 0.088237] SMP: Total of 4 processors activated.
2265[ 0.092913] CPU features: detected feature: 32-bit EL0 Support
2266[ 0.098709] CPU: All CPU(s) started at EL2
2267[ 0.102782] alternatives: patching kernel code
2268[ 0.108037] devtmpfs: initialized
2269[ 0.115559] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
2270[ 0.136552] xor: measuring software checksum speed
2271[ 0.181217] 8regs : 2542.000 MB/sec
2272[ 0.221242] 8regs_prefetch: 2266.000 MB/sec
2273[ 0.265603] 32regs : 3125.000 MB/sec
2274[ 0.305631] 32regs_prefetch: 2627.000 MB/sec
2275[ 0.310052] xor: using function: 32regs (3125.000 MB/sec)
2276[ 0.315506] pinctrl core: initialized pinctrl subsystem
2277[ 0.321193] NET: Registered protocol family 16
2278[ 0.326298] Failed to initialise IOMMU /amba/smmu@fd800000
2279[ 0.331801] vdso: 2 pages (1 code @ ffffff80088d7000, 1 data @ ffffff8008be4000)
2280[ 0.339006] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers.
2281[ 0.374281] DMA: preallocated 65536 KiB pool for atomic allocations
2282[ 0.390631] reset_zynqmp reset-controller: Xilinx zynqmp reset driver probed
2283[ 0.398104] ARM CCI_400_r1 PMU driver probed[ 0.404862] zynqmp-pinctrl ff180000.pinctrl: zynqmp pinctrl initialized
2284[ 0.431571] HugeTLB registered 2 MB page size, pre-allocated 0 pages
2285[ 0.504912] raid6: int64x1 gen() 447 MB/s
2286[ 0.576875] raid6: int64x1 xor() 485 MB/s
2287[ 0.648950] raid6: int64x2 gen() 741 MB/s
2288[ 0.720956] raid6: int64x2 xor() 661 MB/s
2289[ 0.792999] raid6: int64x4 gen() 1086 MB/s
2290[ 0.865042] raid6: int64x4 xor() 816 MB/s
2291[ 0.937074] raid6: int64x8 gen() 1266 MB/s
2292[ 1.009128] raid6: int64x8 xor() 824 MB/s
2293[ 1.081209] raid6: neonx1 gen() 798 MB/s
2294[ 1.153201] raid6: neonx1 xor() 837 MB/s
2295[ 1.225280] raid6: neonx2 gen() 1286 MB/s
2296[ 1.297302] raid6: neonx2 xor() 1143 MB/s
2297[ 1.369322] raid6: neonx4 gen() 1664 MB/s
2298[ 1.441374] raid6: neonx4 xor() 1306 MB/s
2299[ 1.513418] raid6: neonx8 gen() 1752 MB/s
2300[ 1.585455] raid6: neonx8 xor() 1348 MB/s
2301[ 1.589534] raid6: using algorithm neonx8 gen() 1752 MB/s
2302[ 1.594896] raid6: .... xor() 1348 MB/s, rmw enabled
2303[ 1.599827] raid6: using intx1 recovery algorithm
2304[ 1.604983] Write failed gate address:1000f02
2305[ 1.612942] SCSI subsystem initialized
2306[ 1.616733] usbcore: registered new interface driver usbfs
2307[ 1.622069] usbcore: registered new interface driver hub
2308[ 1.627341] usbcore: registered new device driver usb
2309[ 1.632388] media: Linux media interface: v0.10
2310[ 1.636840] Linux video capture interface: v2.00
2311[ 1.641424] pps_core: LinuxPPS API ver. 1 registered
2312[ 1.646330] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
2313[ 1.655423] PTP clock support registered
2314[ 1.659324] EDAC MC: Ver: 3.0.0
2315[ 1.662721] FPGA manager framework
2316[ 1.666063] fpga-region fpga-full: FPGA Region probed
2317[ 1.671065] Advanced Linux Sound Architecture Driver Initialized.
2318[ 1.677322] Bluetooth: Core ver 2.22
2319[ 1.680728] NET: Registered protocol family 31
2320[ 1.685118] Bluetooth: HCI device and connection manager initialized
2321[ 1.691436] Bluetooth: HCI socket layer initialized
2322[ 1.696278] Bluetooth: L2CAP socket layer initialized
2323[ 1.701304] Bluetooth: SCO socket layer initialized
2324[ 1.706712] clocksource: Switched to clocksource arch_sys_counter
2325[ 1.712714] VFS: Disk quotas dquot_6.6.0
2326[ 1.716543] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
2327[ 1.726783] NET: Registered protocol family 2
2328[ 1.731339] TCP established hash table entries: 16384 (order: 5, 131072 bytes)
2329[ 1.738455] TCP bind hash table entries: 16384 (order: 6, 262144 bytes)
2330[ 1.745242] TCP: Hash tables configured (established 16384 bind 16384)
2331[ 1.751639] UDP hash table entries: 1024 (order: 3, 32768 bytes)
2332[ 1.757570] UDP-Lite hash table entries: 1024 (order: 3, 32768 bytes)
2333[ 1.764075] NET: Registered protocol family 1
2334[ 1.768561] RPC: Registered named UNIX socket transport module.
2335[ 1.774286] RPC: Registered udp transport module.
2336[ 1.778965] RPC: Registered tcp transport module.
2337[ 1.783624] RPC: Registered tcp NFSv4.1 backchannel transport module.
2338[ 1.790184] Trying to unpack rootfs image as initramfs...
2339[ 2.113152] Freeing initrd memory: 8760K (ffffffc007771000 - ffffffc007fff000)
2340[ 2.120579] hw perfevents: enabled with armv8_pmuv3 PMU driver, 7 counters available
2341[ 2.128876] futex hash table entries: 1024 (order: 5, 131072 bytes)
2342[ 2.135522] workingset: timestamp_bits=62 max_order=19 bucket_order=0
2343[ 2.142504] NFS: Registering the id_resolver key type
2344[ 2.147388] Key type id_resolver registered
2345[ 2.151518] Key type id_legacy registered
2346[ 2.155502] nfs4filelayout_init: NFSv4 File Layout Driver Registering...
2347[ 2.162172] ntfs: driver 2.1.32 [Flags: R/W].
2348[ 2.166500] jffs2: version 2.2. (NAND) (SUMMARY) © 2001-2006 Red Hat, Inc.
2349[ 2.181278] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 247)
2350[ 2.188566] io scheduler noop registered
2351[ 2.192372] io scheduler deadline registered
2352[ 2.196617] io scheduler cfq registered (default)
2353[ 2.201869] nwl-pcie fd0e0000.pcie: Link is DOWN
2354[ 2.206335] OF: PCI: host bridge /amba/pcie@fd0e0000 ranges:
2355[ 2.211937] OF: PCI: MEM 0xe0000000..0xefffffff -> 0xe0000000
2356[ 2.217805] OF: PCI: MEM 0x600000000..0x7ffffffff -> 0x600000000
2357[ 2.224028] nwl-pcie fd0e0000.pcie: PCI host bridge to bus 0000:00
2358[ 2.230091] pci_bus 0000:00: root bus resource [bus 00-ff]
2359[ 2.235536] pci_bus 0000:00: root bus resource [mem 0xe0000000-0xefffffff]
2360[ 2.242373] pci_bus 0000:00: root bus resource [mem 0x600000000-0x7ffffffff pref]
2361[ 2.250078] pci 0000:00:00.0: PCI bridge to [bus 01-0c]
2362[ 2.255843] xilinx-dpdma fd4c0000.dma: Xilinx DPDMA engine is probed
2363[ 2.262214] xilinx-vdma 400000000.dma: Xilinx AXI VDMA Engine Driver Probed!!
2364[ 2.269265] xilinx-vdma 400010000.dma: Xilinx AXI VDMA Engine Driver Probed!!
2365[ 2.276422] xilinx-zynqmp-dma fd500000.dma: ZynqMP DMA driver Probe success
2366[ 2.283284] xilinx-zynqmp-dma fd510000.dma: ZynqMP DMA driver Probe success
2367[ 2.290206] xilinx-zynqmp-dma fd520000.dma: ZynqMP DMA driver Probe success
2368[ 2.297127] xilinx-zynqmp-dma fd530000.dma: ZynqMP DMA driver Probe success
2369[ 2.304047] xilinx-zynqmp-dma fd540000.dma: ZynqMP DMA driver Probe success
2370[ 2.310966] xilinx-zynqmp-dma fd550000.dma: ZynqMP DMA driver Probe success
2371[ 2.317886] xilinx-zynqmp-dma fd560000.dma: ZynqMP DMA driver Probe success
2372[ 2.324814] xilinx-zynqmp-dma fd570000.dma: ZynqMP DMA driver Probe success
2373[ 2.331767] xilinx-zynqmp-dma ffa80000.dma: ZynqMP DMA driver Probe success
2374[ 2.338649] xilinx-zynqmp-dma ffa90000.dma: ZynqMP DMA driver Probe success
2375[ 2.345568] xilinx-zynqmp-dma ffaa0000.dma: ZynqMP DMA driver Probe success
2376[ 2.352487] xilinx-zynqmp-dma ffab0000.dma: ZynqMP DMA driver Probe success
2377[ 2.359407] xilinx-zynqmp-dma ffac0000.dma: ZynqMP DMA driver Probe success
2378[ 2.366329] xilinx-zynqmp-dma ffad0000.dma: ZynqMP DMA driver Probe success
2379[ 2.373248] xilinx-zynqmp-dma ffae0000.dma: ZynqMP DMA driver Probe success
2380[ 2.380167] xilinx-zynqmp-dma ffaf0000.dma: ZynqMP DMA driver Probe success
2381[ 2.408553] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
2382[ 2.416024] ff000000.serial: ttyPS1 at MMIO 0xff000000 (irq = 46, base_baud = 6250000) is a xuartps
2383[ 2.425106] ff010000.serial: ttyPS0 at MMIO 0xff010000 (irq = 47, base_baud =·r¢¢ªêconsole [ttyPS0] enabled
2384[ 2.434052] console [ttyPS0] enabled
2385[ 2.441036] bootconsole [cdns0] disabled
2386[ 2.441036] bootconsole [cdns0] disabled
2387[ 2.449083] Unable to detect cache hierarchy from DT for CPU 0
2388[ 2.459526] brd: module loaded
2389[ 2.465345] loop: module loaded
2390[ 2.469321] ahci-ceva fd0c0000.ahci: AHCI 0001.0301 32 slots 2 ports 6 Gbps 0x3 impl platform mode
2391[ 2.478201] ahci-ceva fd0c0000.ahci: flags: 64bit ncq sntf pm clo only pmp fbs pio slum part ccc sds apst
2392[ 2.488909] scsi host0: ahci-ceva
2393[ 2.492322] scsi host1: ahci-ceva
2394[ 2.495662] ata1: SATA max UDMA/133 mmio [mem 0xfd0c0000-0xfd0c1fff] port 0x100 irq 43
2395[ 2.503496] ata2: SATA max UDMA/133 mmio [mem 0xfd0c0000-0xfd0c1fff] port 0x180 irq 43
2396[ 2.511555] mtdoops: mtd device (mtddev=name/number) must be supplied
2397[ 2.518891] zynqmp-qspi ff0f0000.spi: rx bus width not found
2398[ 2.524820] m25p80 spi0.0: found n25q00, expected n25q512a
2399[ 2.530521] m25p80 spi0.0: n25q00 (131072 Kbytes)
2400[ 2.535154] 5 ofpart partitions found on MTD device spi0.0
2401[ 2.540601] Creating 5 MTD partitions on "spi0.0":
2402[ 2.545378] 0x000000000000-0x000000500000 : "boot"
2403[ 2.550639] 0x000000500000-0x000000540000 : "bootenv"
2404[ 2.556035] 0x000000540000-0x000002740000 : "kernel"
2405[ 2.561326] 0x000002740000-0x000003740000 : "user"
2406[ 2.566458] 0x000003740000-0x000003750000 : "test"
2407[ 2.572466] libphy: Fixed MDIO Bus: probed
2408[ 2.577585] tun: Universal TUN/TAP device driver, 1.6
2409[ 2.582554] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
2410[ 2.588833] CAN device driver interface
2411[ 2.593144] macb ff0c0000.ethernet: Not enabling partial store and forward
2412[ 2.600444] libphy: MACB_mii_bus: probed
2413[ 2.678987] macb ff0c0000.ethernet eth0: Cadence GEM rev 0x50070106 at 0xff0c0000 irq 30 (00:0a:35:00:22:01)
2414[ 2.688732] Marvell 88E1510 ff0c0000.etherne:00: attached PHY driver [Marvell 88E1510] (mii_bus:phy_addr=ff0c0000.etherne:00, irq=-1)
2415[ 2.701322] usbcore: registered new interface driver asix
2416[ 2.706687] usbcore: registered new interface driver ax88179_178a
2417[ 2.712735] usbcore: registered new interface driver cdc_ether
2418[ 2.718549] usbcore: registered new interface driver net1080
2419[ 2.724191] usbcore: registered new interface driver cdc_subset
2420[ 2.730092] usbcore: registered new interface driver zaurus
2421[ 2.735660] usbcore: registered new interface driver cdc_ncm
2422[ 2.741622] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
2423[ 2.748064] ehci-pci: EHCI PCI platform driver
2424[ 2.752716] usbcore: registered new interface driver uas
2425[ 2.757975] usbcore: registered new interface driver usb-storage
2426[ 2.764248] mousedev: PS/2 mouse device common for all mice
2427[ 2.770150] rtc_zynqmp ffa60000.rtc: rtc core: registered ffa60000.rtc as rtc0
2428[ 2.777320] i2c /dev entries driver
2429[ 2.780949] cdns-i2c ff020000.i2c: 400 kHz mmio ff020000 irq 32
2430[ 2.786995] cdns-i2c ff030000.i2c: 400 kHz mmio ff030000 irq 33
2431[ 2.793767] usbcore: registered new interface driver uvcvideo
2432[ 2.799423] USB Video Class driver (1.1.1)
2433[ 2.803858] Bluetooth: HCI UART driver ver 2.3
2434[ 2.808219] Bluetooth: HCI UART protocol H4 registered
2435[ 2.813336] Bluetooth: HCI UART protocol BCSP registered
2436[ 2.818630] Bluetooth: HCI UART protocol LL registered
2437[ 2.823751] Bluetooth: HCI UART protocol ATH3K registered
2438[ 2.827838] ata1: SATA link down (SStatus 0 SControl 330)
2439[ 2.830423] ata2: SATA link down (SStatus 0 SControl 330)
2440[ 2.839895] Bluetooth: HCI UART protocol Three-wire (H5) registered
2441[ 2.846181] Bluetooth: HCI UART protocol Intel registered
2442[ 2.851563] Bluetooth: HCI UART protocol Broadcom registered
2443[ 2.857170] Bluetooth: HCI UART protocol QCA registered
2444[ 2.862413] usbcore: registered new interface driver bcm203x
2445[ 2.868050] usbcore: registered new interface driver bpa10x
2446[ 2.873605] usbcore: registered new interface driver bfusb
2447[ 2.879074] usbcore: registered new interface driver btusb
2448[ 2.884512] Bluetooth: Generic Bluetooth SDIO driver ver 0.1
2449[ 2.890206] usbcore: registered new interface driver ath3k
2450[ 2.895743] EDAC MC: ECC not enabled
2451[ 2.899371] EDAC DEVICE0: Giving out device to module edac controller cache_err: DEV edac (POLLED)
2452[ 2.908405] EDAC DEVICE1: Giving out device to module zynqmp-ocm-edac controller zynqmp_ocm: DEV ff960000.memory-controller (INTERRUPT)
2453[ 2.920701] sdhci: Secure Digital Host Controller Interface driver
2454[ 2.926791] sdhci: Copyright(c) Pierre Ossman
2455[ 2.931130] sdhci-pltfm: SDHCI platform and OF driver helper
2456[ 2.982724] mmc0: SDHCI controller on ff160000.sdhci [ff160000.sdhci] using ADMA 64-bit
2457[ 2.990845] ledtrig-cpu: registered to indicate activity on CPUs
2458[ 2.996887] usbcore: registered new interface driver usbhid
2459[ 3.002372] usbhid: USB HID core driver
2460[ 3.007780] fpga_manager fpga0: Xilinx ZynqMP FPGA Manager registered
2461[ 3.014656] xilinx-dp-snd-pcm dp_snd_pcm0: Xilinx DisplayPort Sound PCM probed
2462[ 3.021815] xilinx-dp-snd-pcm dp_snd_pcm1: Xilinx DisplayPort Sound PCM probed
2463[ 3.029170] PLL: shutdown
2464[ 3.032594] Write failed to divider address:fd1a007c
2465[ 3.037628] PLL: enable
2466[ 3.040155] xilinx-dp-snd-codec dp_snd_codec0: Xilinx DisplayPort Sound Codec probed
2467[ 3.048194] xilinx-dp-snd-card dp_snd_card: xilinx-dp-snd-codec-dai <-> xilinx-dp-snd-codec-dai mapping ok
2468[ 3.057859] xilinx-dp-snd-card dp_snd_card: xilinx-dp-snd-codec-dai <-> xilinx-dp-snd-codec-dai mapping ok
2469[ 3.067721] xilinx-dp-snd-card dp_snd_card: Xilinx DisplayPort Sound Card probed
2470[ 3.075148] pktgen: Packet Generator for packet performance testing. Version: 2.75
2471[ 3.083316] Netfilter messages via NETLINK v0.30.
2472[ 3.088063] ip_tables: (C) 2000-2006 Netfilter Core Team
2473[ 3.093336] Initializing XFRM netlink socket
2474[ 3.097663] NET: Registered protocol family 10
2475[ 3.103496] ip6_tables: (C) 2000-2006 Netfilter Core Team
2476[ 3.108845] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver
2477[ 3.115078] NET: Registered protocol family 17
2478[ 3.119447] NET: Registered protocol family 15
2479[ 3.123874] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this.
2480[ 3.136797] Ebtables v2.0 registered
2481[ 3.140410] can: controller area network core (rev 20120528 abi 9)
2482[ 3.146552] NET: Registered protocol family 29
2483[ 3.150946] can: raw protocol (rev 20120528)
2484[ 3.155199] can: broadcast manager protocol (rev 20161123 t)
2485[ 3.160843] can: netlink gateway (rev 20130117) max_hops=1
2486[ 3.166486] Bluetooth: RFCOMM TTY layer initialized
2487[ 3.171281] Bluetooth: RFCOMM socket layer initialized
2488[ 3.176406] Bluetooth: RFCOMM ver 1.11
2489[ 3.180129] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
2490[ 3.185421] Bluetooth: BNEP filters: protocol multicast
2491[ 3.190633] Bluetooth: BNEP socket layer initialized
2492[ 3.195579] Bluetooth: HIDP (Human Interface Emulation) ver 1.2
2493[ 3.201483] Bluetooth: HIDP socket layer initialized
2494[ 3.206601] 9pnet: Installing 9P2000 support
2495[ 3.210804] Key type dns_resolver registered
2496[ 3.216999] registered taskstats version 1
2497[ 3.221451] Btrfs loaded, crc32c=crc32c-generic
2498[ 3.233100] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller
2499[ 3.238535] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 1
2500[ 3.246430] xhci-hcd xhci-hcd.0.auto: hcc params 0x0238f625 hci version 0x100 quirks 0x02010010
2501[ 3.255086] xhci-hcd xhci-hcd.0.auto: irq 229, io mem 0xfe300000
2502[ 3.261158] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
2503[ 3.267862] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
2504[ 3.275061] usb usb1: Product: xHCI Host Controller
2505[ 3.279921] usb usb1: Manufacturer: Linux 4.9.0 xhci-hcd
2506[ 3.285215] usb usb1: SerialNumber: xhci-hcd.0.auto
2507[ 3.292350] hub 1-0:1.0: USB hub found
2508[ 3.299063] hub 1-0:1.0: 1 port detected
2509[ 3.303035] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller
2510[ 3.308444] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 2
2511[ 3.316115] usb usb2: We don't know the algorithms for LPM for this host, disabling LPM.
2512[ 3.324208] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003
2513[ 3.330920] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
2514[ 3.338120] usb usb2: Product: xHCI Host Controller
2515[ 3.342985] usb usb2: Manufacturer: Linux 4.9.0 xhci-hcd
2516[ 3.348276] usb usb2: SerialNumber: xhci-hcd.0.auto
2517[ 3.353344] hub 2-0:1.0: USB hub found
2518[ 3.357032] hub 2-0:1.0: 1 port detected
2519[ 3.361305] rtc_zynqmp ffa60000.rtc: setting system clock to 1970-01-01 00:00:15 UTC (15)
2520[ 3.369508] clk: Not disabling unused clocks
2521[ 3.373694] ALSA device list:
2522[ 3.376642] #0: DisplayPort monitor
2523[ 3.380916] Freeing unused kernel memory: 448K (ffffffc000b70000 - ffffffc000be0000)
2524INIT: version 2.88 booting
2525Starting udev
2526[ 3.493396] udevd[1613]: starting version 3.2
2527[ 3.498031] random: udevd: uninitialized urandom read (16 bytes read)
2528[ 3.504470] random: udevd: uninitialized urandom read (16 bytes read)
2529[ 3.510886] random: udevd: uninitialized urandom read (16 bytes read)
2530[ 3.517289] random: udevd: uninitialized urandom read (16 bytes read)
2531[ 3.527353] udevd[1614]: starting eudev-3.2
2532[ 3.571405] random: udevd: uninitialized urandom read (16 bytes read)
2533[ 3.580850] random: udevd: uninitialized urandom read (16 bytes read)
2534[ 3.606992] dsaxidma: loading out-of-tree module taints kernel.
2535[ 3.607348] dsaxidma: loading out-of-tree module taints kernel.
2536[ 3.608036] <dma1> init: registered
2537[ 3.627739] <dma2> init: registered
2538Populating dev cache
2539[ 4.099534] random: dd: uninitialized urandom read (512 bytes read)
2540Thu Jul 26 08:51:43 UTC 2018
2541Starting internet superserver: inetd.
2542Running postinst /etc/rpm-postinsts/100-sysvinit-inittab...
2543update-rc.d: /etc/init.d/run-postinsts exists during rc.d purge (continuing)
2544INIT: Entering runlevel: 5
2545Hello World
2546[22]:0x12
2547[20]:0x201
2548[20]:0x201
2549[22]:0x1
2550[0]:0x140
2551[0]:0x140
2552Configuring network interfaces... [ 4.399996] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
2553done.
2554Starting Dropbear SSH server: [ 4.429409] random: dropbearkey: uninitialized urandom read (32 bytes read)
2555[ 4.439314] random: dropbearkey: uninitialized urandom read (32 bytes read)
2556Generating key, this may take a while...
2557[ 5.426827] macb ff0c0000.ethernet eth0: link up (1000/Full)
2558[ 5.432428] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
2559[ 5.708040] random: dropbearkey: uninitialized urandom read (32 bytes read)
2560Public key portion is:
2561ssh-rsa AAAAB3NzaC1yc2EAAAADAQABAAABAQDXesycGlkGPeZc7t79lfHkI9rBmw4sx8AEdnBfbWYPMy+19b2IJCyuF5AWtzzTCrQDYgNZftW762IlT1u92LRj551kY1AlcXRpT0CGefMAG3r/Qt3f6eafYm+OdPie2oFZy/rrY0a8a5EMMus6WKgam6f51Pn0rWJMrhoIi+sp+J46Tn9Ud9Bbf7SQlaPWpqXC/gM/kyXgImdQByClcQ6eecGBuNTEHx6X78LpryTcwtzLK20dAwyxLue3quFBJ8fJEL3z012nJ4doLWcDIPAeyD9I41h8lSq9c2YLTijXWda4aGdSoZaP9l+/wpc8uk318UvThSi3a7f6i0AcJXAX root@VP88x_2017_3_PRJ0191
2562Fingerprint: md5 2f:cc:d9:e7:c0:fe:3b:ed:9f:b1:49:bd:1f:ad:b2:96
2563dropbear.
2564Starting syslogd/klogd: done
2565[ 5.763586] random: fast init done
2566[ 6.217028] random: crng init done
2567[ 8.008636] jffs2: notice: (2074) jffs2_build_xattr_subsystem: complete building xattr subsystem, 0 of xdatum (0 unchecked, 0 orphan) and 0 of xref (0 dead, 0 orphan) found.
2568hello world.....
2569Starting tcf-agent: OK
2570
2571root@VP88x_2017_3_PRJ0191:~# ping 192.168.1.20
2572PING 192.168.1.20 (192.168.1.20): 56 data bytes
2573^C
2574--- 192.168.1.20 ping statistics ---
25752 packets transmitted, 0 packets received, 100% packet loss
2576root@VP88x_2017_3_PRJ0191:~# ping 192.168.1.20
2577PING 192.168.1.20 (192.168.1.20): 56 data bytes
2578^C
2579--- 192.168.1.20 ping statistics ---
25809 packets transmitted, 0 packets received, 100% packet loss
2581root@VP88x_2017_3_PRJ0191:~# ifconfig
2582eth0 Link encap:Ethernet HWaddr 00:0A:35:00:22:01
2583 inet addr:192.168.1.10 Bcast:192.168.1.255 Mask:255.255.255.0
2584 inet6 addr: fe80::20a:35ff:fe00:2201%4879712/64 Scope:Link
2585 UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
2586 RX packets:86 errors:0 dropped:0 overruns:0 frame:0
2587 TX packets:65 errors:0 dropped:0 overruns:0 carrier:0
2588 collisions:0 txqueuelen:1000
2589 RX bytes:11317 (11.0 KiB) TX bytes:13095 (12.7 KiB)
2590 Interrupt:30
2591
2592lo Link encap:Local Loopback
2593 inet addr:127.0.0.1 Mask:255.0.0.0
2594 inet6 addr: ::1%4879712/128 Scope:Host
2595 UP LOOPBACK RUNNING MTU:65536 Metric:1
2596 RX packets:0 errors:0 dropped:0 overruns:0 frame:0
2597 TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
2598 collisions:0 txqueuelen:1
2599 RX bytes:0 (0.0 B) TX bytes:0 (0.0 B)
2600
2601root@VP88x_2017_3_PRJ0191:~# ifconfig
2602eth0 Link encap:Ethernet HWaddr 00:0A:35:00:22:01
2603 inet addr:192.168.1.10 Bcast:192.168.1.255 Mask:255.255.255.0
2604 inet6 addr: fe80::20a:35ff:fe00:2201%4879712/64 Scope:Link
2605 UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
2606 RX packets:108 errors:0 dropped:0 overruns:0 frame:0
2607 TX packets:75 errors:0 dropped:0 overruns:0 carrier:0
2608 collisions:0 txqueuelen:1000
2609 RX bytes:15741 (15.3 KiB) TX bytes:15714 (15.3 KiB)
2610 Interrupt:30
2611
2612lo Link encap:Local Loopback
2613 inet addr:127.0.0.1 Mask:255.0.0.0
2614 inet6 addr: ::1%4879712/128 Scope:Host
2615 UP LOOPBACK RUNNING MTU:65536 Metric:1
2616 RX packets:0 errors:0 dropped:0 overruns:0 frame:0
2617 TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
2618 collisions:0 txqueuelen:1
2619 RX bytes:0 (0.0 B) TX bytes:0 (0.0 B)
2620
2621root@VP88x_2017_3_PRJ0191:~# ping 192.168.1.20
2622PING 192.168.1.20 (192.168.1.20): 56 data bytes
262364 bytes from 192.168.1.20: seq=0 ttl=128 time=0.662 ms
262464 bytes from 192.168.1.20: seq=1 ttl=128 time=0.436 ms
2625^C
2626--- 192.168.1.20 ping statistics ---
26272 packets transmitted, 2 packets received, 0% packet loss
2628round-trip min/avg/max = 0.436/0.549/0.662 ms
2629root@VP88x_2017_3_PRJ0191:~#
2630
2631
2632[ 13.038763] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 330)
2633[ 13.045056] ata1.00: ATA-8: InnoDisk SATA Slim D150Q, 120925, max UDMA/133
2634[ 13.051850] ata1.00: 15649200 sectors, multi 16: LBA NCQ (depth 31/32)
2635[ 13.058572] ata1.00: configured for UDMA/133
2636[ 13.063058] scsi 0:0:0:0: Direct-Access ATA InnoDisk SATA Sl 25 PQ: 0 ANSI: 5
2637[ 13.111049] sd 0:0:0:0: [sda] 15649200 512-byte logical blocks: (8.01 GB/7.46 GiB)
2638[ 13.118623] sd 0:0:0:0: [sda] Write Protect is off
2639[ 13.123374] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
2640[ 13.133141] sda: sda1
2641[ 13.135911] sd 0:0:0:0: [sda] Attached SCSI disk
2642[ 13.140632] Freeing unused kernel memory: 448K (ffffffc000b70000 - ffffffc000be0000)
2643INIT: version 2.88 booting
2644Starting udev
2645[ 13.252613] udevd[1623]: starting version 3.2
2646[ 13.257341] random: udevd: uninitialized urandom read (16 bytes read)
2647[ 13.263811] random: udevd: uninitialized urandom read (16 bytes read)
2648[ 13.270227] random: udevd: uninitialized urandom read (16 bytes read)
2649[ 13.276619] random: udevd: uninitialized urandom read (16 bytes read)
2650[ 13.286696] udevd[1624]: starting eudev-3.2
2651[ 13.330715] random: udevd: uninitialized urandom read (16 bytes read)
2652[ 13.349023] random: udevd: uninitialized urandom read (16 bytes read)
2653[ 13.362345] dsaxidma: loading out-of-tree module taints kernel.
2654[ 13.362401] dsaxidma: loading out-of-tree module taints kernel.
2655[ 13.363238] <dma1> init: registered
2656[ 13.383594] <dma2> init: registered
2657Populating dev cache
2658[ 13.914247] random: dd: uninitialized urandom read (512 bytes read)
2659Thu Jul 26 08:51:43 UTC 2018
2660Starting internet superserver: inetd.
2661Running postinst /etc/rpm-postinsts/100-sysvinit-inittab...
2662update-rc.d: /etc/init.d/run-postinsts exists during rc.d purge (continuing)
2663INIT: Entering runlevel: 5
2664Hello World
2665[22]:0x12
2666[20]:0x201
2667[20]:0x201
2668[22]:0x1
2669[0]:0x140
2670[0]:0x140
2671Configuring network interfaces... [ 14.212935] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
2672done.
2673Starting Dropbear SSH server: [ 14.242153] random: dropbearkey: uninitialized urandom read (32 bytes read)
2674[ 14.252269] random: dropbearkey: uninitialized urandom read (32 bytes read)
2675Generating key, this may take a while...
2676[ 15.250869] macb ff0c0000.ethernet eth0: link up (1000/Full)
2677[ 15.256471] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
2678[ 15.314899] random: dropbearkey: uninitialized urandom read (32 bytes read)
2679Public key portion is:
2680ssh-rsa AAAAB3NzaC1yc2EAAAADAQABAAABAQC1QlQ/NUvyL4v4heph5BlEw4+Ik24DDrawaqpccEwqaO8VnAVGdWszsKRZwPhNDl13kmFR7mJr0QQsYNVO3uy7YIez7u1giF7UqO4zpAVlCav8FTa7l57ZITFMhzRp37e9xORsUBW9BF5LKcEIE34lmfqgOuSG69Fd2qjmNaEAzoZn9bv1lSRNVEN3MdPvhOVsyaMulfOYA5jrxuixi7ou+uQvS7ya0dSM191Lre5eemFUIpz44V4+4cMLLcwO0Swf7nxHlNUpbfwcpoN3Wv2IxmNocI7wuaQtVCROscp/jQJdZ2FYgQiz4rE5hO/5HLT0r4rzg2onuQMbTBaAjND7 root@VP88x_2017_3_PRJ0191
2681Fingerprint: md5 f4:76:f4:77:a9:50:9f:16:ef:b2:4e:10:a0:[ 15.367433] random: fast init done
268232:f5:63
2683dropbear.
2684Starting syslogd/klogd: done
2685[ 15.795068] random: crng init done
2686[ 17.491233] jffs2: notice: (2115) jffs2_build_xattr_subsystem: complete building xattr subsystem, 0 of xdatum (0 unchecked, 0 orphan) and 0 of xref (0 dead, 0 orphan) found.
2687hello world.....
2688Starting tcf-agent: OK
2689
2690root@VP88x_2017_3_PRJ0191:~#
2691root@VP88x_2017_3_PRJ0191:~#
2692root@VP88x_2017_3_PRJ0191:~#
2693root@VP88x_2017_3_PRJ0191:~# ping 192.168.1.10
2694PING 192.168.1.10 (192.168.1.10): 56 data bytes
269564 bytes from 192.168.1.10: seq=0 ttl=64 time=0.172 ms
2696^C
2697--- 192.168.1.10 ping statistics ---
26981 packets transmitted, 1 packets received, 0% packet loss
2699round-trip min/avg/max = 0.172/0.172/0.172 ms
2700root@VP88x_2017_3_PRJ0191:~# ping 192.168.1.20
2701PING 192.168.1.20 (192.168.1.20): 56 data bytes
270264 bytes from 192.168.1.20: seq=0 ttl=128 time=0.540 ms
2703^C
2704--- 192.168.1.20 ping statistics ---
27051 packets transmitted, 1 packets received, 0% packet loss
2706round-trip min/avg/max = 0.540/0.540/0.540 ms
2707root@VP88x_2017_3_PRJ0191:~# ls /run/media/sda1/
2708$RECYCLE.BIN/ xxx.txt
2709System Volume Information/
2710root@VP88x_2017_3_PRJ0191:~# cat /run/media/sda1/xxx.txt
2711sdfsdfroot@VP88x_2017_3_PRJ0191:~# ./dia^C
2712root@VP88x_2017_3_PRJ0191:~# cd /tmp
2713root@VP88x_2017_3_PRJ0191:/tmp# chmod +x *
2714root@VP88x_2017_3_PRJ0191:/tmp# ./diagnostic.elf
2715enter number of cyclic (0 - for infinite)
27161
2717SPI1 result = 0 SUCCESS
2718An error occured while opening PCIe device /dev/vp880-0
2719FDSP_ErrorFunction:_4FM_OpenDevice
2720FDSP_ErrorCode:-3
2721FDSP_ErrorMessage:No device found
2722PCIe result = -1 FAILED
2723
2724--- AMS zynq PS System monitor---
2725temperature ps 61.64C
2726vcc_psintlp 0.87V
2727vcc_psintfp 0.87V
2728vcc_psaux 1.81V
2729vcc_psddr_504 1.21V
2730vcc_psio3_503 3.24V
2731vcc_psio0_500 3.24V
2732vcc_psio1_501 1.80V
2733vcc_psio2_502 1.80V
2734vcc_psmgtravcc 0.87V
2735vcc_psmgtravtt 1.81V
2736---------------------------------
2737
2738--- AMS zynq PL System monitor---
2739temperature pl 57.66C
2740vcc_int 0.87V
2741vcc_aux 1.81V
2742vcc_bram 0.87V
2743vcc_psintlp 0.87V
2744vcc_psintfp 0.87V
2745vcc_psaux 1.81V
2746vcc_vuser1 0.00V
2747vcc_vuser2 0.00V
2748vcc_vuser3 0.00V
2749vcc_vuser4 0.00V
2750---------------------------------
2751ranran.............temperature 31 C
2752vmon_fmc_vadj 1.79V
2753vmon_fmc_viob 1.79V
2754vmon_sblast_vcore 1.64V
2755vmon_sblast_vio 1.48V
2756vmon_2v5_mgt_refclk 2.44V
2757vmon_3v3_mgt_refclk 3.22V
2758vmon_1v2 1.18V
2759vmon_1v4 1.40V
2760vmon_vaux 3.31V
2761VPX_SYS_RST_N :1
2762PS_ERROR_STATUS :1
2763PS_ERROR_OUT :1
2764PS_INIT_B :1
2765PS_DONE :1
2766INIT_B :1
2767DONE :1
2768FLASH_A26 :1
2769HSC_12V_PG :1
2770HSC_5V_PG :1
2771VPX_GAP :1
2772VPX_GA4 :1
2773VPX_GA3 :1
2774VPX_GA2 :1
2775VPX_GA1 :1
2776VPX_GA0 :1
2777PG_LED_N :1
2778ZYNQ_CONFDONE_LED :1
2779FPGA_CONFDONE_LED :1
2780FMC_VADJ_VS0 :1
2781FMC_VADJ_VS1 :1
2782FMC_VADJ_VS2 :1
2783VADJ_FMC_EN_L :1
2784FMC_BYPASS :1
2785HSC_ON :1
2786HSC_3V3_PG :1
2787PG_C2M_3V3 :1
2788MGT_PG :1
2789DDR4_VTT_PG :1
2790DDR4_PG :1
2791PG_FPGA_CORE :1
27921V8_LOC_2V5_VPP_PG :1
2793HSC Source channel 1 3.250V
2794HSC Source channel 2 5.031V
2795HSC ADIN channel 1 0.423V
2796HSC ADIN channel 2 0.423V
2797HSC Sense channel 1 14.688mV
2798HSC Current channel 1 2.938A
2799HSC Sense channel 2 2.688mV
2800HSC Current channel 2 0.896A
2801HSC Power channel 1 9.547W
2802HSC Power channel 2 4.507W
2803---------------------------------------------------
2804HSC Source channel 1 2.500V
2805HSC Source channel 2 11.906V
2806HSC ADIN channel 1 0.423V
2807HSC ADIN channel 2 0.423V
2808HSC Sense channel 1 0.000mV
2809HSC Current channel 1 0.000A
2810HSC Sense channel 2 4.562mV
2811HSC Current channel 2 0.913A
2812HSC Power channel 1 0.000W
2813HSC Power channel 2 10.864W
2814---------------------------------------------------
2815HOSTIF version 1.0.0.5
2816fpga disabled
2817MMC result =SUCCESS
2818PING 192.168.1.20 (192.168.1.20): 56 data bytes
281964 bytes from 192.168.1.20: seq=0 ttl=128 time=0.457 ms
2820
2821--- 192.168.1.20 ping statistics ---
28221 packets transmitted, 1 packets received, 0% packet loss
2823round-trip min/avg/max = 0.457/0.457/0.457 ms
2824Ethernet result = 0 SUCCESS
2825UnitAPI version : 1.3.8 : Enumerating units in the system, please wait...
2826
2827unitapi_auto_config returned -50
2828
2829Invalid device handle '1'
2830Press a key to exit the application
2831FMC result = -2 FAILED
2832memory test: OK
2833Memory result = 0 SUCCESS
2834DISK: OK
2835DISK result = 0 SUCCESS
2836FLASH: OK
2837FLASH result = 0 SUCCESS
2838read returned 9
2839RFFE result = 0 SUCCESS
2840root@VP88x_2017_3_PRJ0191:/tmp#
2841root@VP88x_2017_3_PRJ0191:/tmp# ./diagnostic.elf ^C
2842root@VP88x_2017_3_PRJ0191:/tmp# lspci
2843.automount-sda1 diagnostic.elf
2844root@VP88x_2017_3_PRJ0191:/tmp# lspci --vvv
2845lspci: invalid option -- '-'
2846Usage: lspci [<switches>]
2847
2848Basic display modes:
2849-mm Produce machine-readable output (single -m for an obsolete format)
2850-t Show bus tree
2851
2852Display options:
2853-v Be verbose (-vv for very verbose)
2854-k Show kernel drivers handling each device
2855-x Show hex-dump of the standard part of the config space
2856-xxx Show hex-dump of the whole config space (dangerous; root only)
2857-xxxx Show hex-dump of the 4096-byte extended config space (root only)
2858-b Bus-centric view (addresses and IRQ's as seen by the bus)
2859-D Always show domain numbers
2860
2861Resolving of device ID's to names:
2862-n Show numeric ID's
2863-nn Show both textual and numeric ID's (names & numbers)
2864-q Query the PCI ID database for unknown ID's via DNS
2865-qq As above, but re-query locally cached entries
2866-Q Query the PCI ID database for all ID's via DNS
2867
2868Selection of devices:
2869-s [[[[<domain>]:]<bus>]:][<slot>][.[<func>]] Show only devices in selected slots
2870-d [<vendor>]:[<device>][:<class>] Show only devices with specified ID's
2871
2872Other options:
2873-i <file> Use specified ID database instead of /usr/share/pci.ids.gz
2874-p <file> Look up kernel modules in a given file instead of default modules.pcimap
2875-M Enable `bus mapping' mode (dangerous; root only)
2876
2877PCI access options:
2878-A <method> Use the specified PCI access method (see `-A help' for a list)
2879-O <par>=<val> Set PCI access parameter (see `-O help' for a list)
2880-G Enable PCI access debugging
2881-F <file> Read PCI configuration dump from a given file
2882root@VP88x_2017_3_PRJ0191:/tmp# lspci -vvv
288300:00.0 PCI bridge: Xilinx Corporation Device d024 (prog-if 00 [Normal decode])
2884 Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
2885 Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
2886 Interrupt: pin A routed to IRQ 255
2887 Bus: primary=00, secondary=01, subordinate=0c, sec-latency=0
2888 I/O behind bridge: 00000000-00000fff
2889 Memory behind bridge: fff00000-000fffff
2890 Prefetchable memory behind bridge: 00000000fff00000-00000000000fffff
2891 Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
2892 BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
2893 PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
2894 Capabilities: [40] Power Management version 3
2895 Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold-)
2896 Status: D0 NoSoftRst+ PME-Enable- DSel=0 DScale=0 PME-
2897 Capabilities: [60] Express (v2) Root Port (Slot-), MSI 00
2898 DevCap: MaxPayload 256 bytes, PhantFunc 0
2899 ExtTag- RBE+
2900 DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
2901 RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop+
2902 MaxPayload 128 bytes, MaxReadReq 512 bytes
2903 DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr- TransPend+
2904 LnkCap: Port #0, Speed 5GT/s, Width x2, ASPM not supported, Exit Latency L0s unlimited, L1 unlimited
2905 ClockPM- Surprise- LLActRep- BwNot+ ASPMOptComp+
2906 LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- CommClk-
2907 ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
2908 LnkSta: Speed 2.5GT/s, Width x2, TrErr- Train+ SlotClk+ DLActive- BWMgmt- ABWMgmt-
2909 RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal- PMEIntEna- CRSVisible+
2910 RootCap: CRSVisible+
2911 RootSta: PME ReqID 0000, PMEStatus- PMEPending-
2912 DevCap2: Completion Timeout: Range B, TimeoutDis+, LTR-, OBFF Not Supported ARIFwd-
2913 DevCtl2: Completion Timeout: 50us to 50ms, TimeoutDis-, LTR-, OBFF Disabled ARIFwd-
2914 LnkCtl2: Target Link Speed: 5GT/s, EnterCompliance- SpeedDis-
2915 Transmit Margin: Normal Operating Range, EnterModifiedCompliance- ComplianceSOS-
2916 Compliance De-emphasis: -6dB
2917 LnkSta2: Current De-emphasis Level: -3.5dB, EqualizationComplete-, EqualizationPhase1-
2918 EqualizationPhase2-, EqualizationPhase3-, LinkEqualizationRequest-
2919 Capabilities: [100 v1] Device Serial Number 00-00-00-00-00-00-00-00
2920 Capabilities: [10c v1] Virtual Channel
2921 Caps: LPEVC=0 RefClk=100ns PATEntryBits=1
2922 Arb: Fixed- WRR32- WRR64- WRR128-
2923 Ctrl: ArbSelect=Fixed
2924 Status: InProgress-
2925 VC0: Caps: PATOffset=00 MaxTimeSlots=1 RejSnoopTrans-
2926 Arb: Fixed- WRR32- WRR64- WRR128- TWRR128- WRR256-
2927 Ctrl: Enable+ ID=0 ArbSelect=Fixed TC/VC=ff
2928 Status: NegoPending- InProgress-
2929 Capabilities: [128 v1] Vendor Specific Information: ID=1234 Rev=1 Len=018 <?>
2930
2931root@VP88x_2017_3_PRJ0191:/tmp# lspci --vvv
2932lspci: invalid option -- '-'
2933Usage: lspci [<switches>]
2934
2935Basic display modes:
2936-mm Produce machine-readable output (single -m for an obsolete format)
2937-t Show bus tree
2938
2939Display options:
2940-v Be verbose (-vv for very verbose)
2941-k Show kernel drivers handling each device
2942-x Show hex-dump of the standard part of the config space
2943-xxx Show hex-dump of the whole config space (dangerous; root only)
2944-xxxx Show hex-dump of the 4096-byte extended config space (root only)
2945-b Bus-centric view (addresses and IRQ's as seen by the bus)
2946-D Always show domain numbers
2947
2948Resolving of device ID's to names:
2949-n Show numeric ID's
2950-nn Show both textual and numeric ID's (names & numbers)
2951-q Query the PCI ID database for unknown ID's via DNS
2952-qq As above, but re-query locally cached entries
2953-Q Query the PCI ID database for all ID's via DNS
2954
2955Selection of devices:
2956-s [[[[<domain>]:]<bus>]:][<slot>][.[<func>]] Show only devices in selected slots
2957-d [<vendor>]:[<device>][:<class>] Show only devices with specified ID's
2958
2959Other options:
2960-i <file> Use specified ID database instead of /usr/share/pci.ids.gz
2961-p <file> Look up kernel modules in a given file instead of default modules.pcimap
2962-M Enable `bus mapping' mode (dangerous; root only)
2963
2964PCI access options:
2965-A <method> Use the specified PCI access method (see `-A help' for a list)
2966-O <par>=<val> Set PCI access parameter (see `-O help' for a list)
2967-G Enable PCI access debugging
2968-F <file> Read PCI configuration dump from a given file
2969root@VP88x_2017_3_PRJ0191:/tmp# lspci -k
297000:00.0 PCI bridge: Xilinx Corporation Device d024
2971root@VP88x_2017_3_PRJ0191:/tmp# lspci
297200:00.0 PCI bridge: Xilinx Corporation Device d024
2973root@VP88x_2017_3_PRJ0191:/tmp#
2974root@VP88x_2017_3_PRJ0191:/tmp#
2975root@VP88x_2017_3_PRJ0191:/tmp#
2976root@VP88x_2017_3_PRJ0191:/tmp# lspci --help
2977lspci: invalid option -- '-'
2978Usage: lspci [<switches>]
2979
2980Basic display modes:
2981-mm Produce machine-readable output (single -m for an obsolete format)
2982-t Show bus tree
2983
2984Display options:
2985-v Be verbose (-vv for very verbose)
2986-k Show kernel drivers handling each device
2987-x Show hex-dump of the standard part of the config space
2988-xxx Show hex-dump of the whole config space (dangerous; root only)
2989-xxxx Show hex-dump of the 4096-byte extended config space (root only)
2990-b Bus-centric view (addresses and IRQ's as seen by the bus)
2991-D Always show domain numbers
2992
2993Resolving of device ID's to names:
2994-n Show numeric ID's
2995-nn Show both textual and numeric ID's (names & numbers)
2996-q Query the PCI ID database for unknown ID's via DNS
2997-qq As above, but re-query locally cached entries
2998-Q Query the PCI ID database for all ID's via DNS
2999
3000Selection of devices:
3001-s [[[[<domain>]:]<bus>]:][<slot>][.[<func>]] Show only devices in selected slots
3002-d [<vendor>]:[<device>][:<class>] Show only devices with specified ID's
3003
3004Other options:
3005-i <file> Use specified ID database instead of /usr/share/pci.ids.gz
3006-p <file> Look up kernel modules in a given file instead of default modules.pcimap
3007-M Enable `bus mapping' mode (dangerous; root only)
3008
3009PCI access options:
3010-A <method> Use the specified PCI access method (see `-A help' for a list)
3011-O <par>=<val> Set PCI access parameter (see `-O help' for a list)
3012-G Enable PCI access debugging
3013-F <file> Read PCI configuration dump from a given file
3014root@VP88x_2017_3_PRJ0191:/tmp# lspci -xxx
301500:00.0 PCI bridge: Xilinx Corporation Device d024
301600: ee 10 24 d0 00 00 10 00 00 00 04 06 00 00 01 00
301710: 00 00 00 00 00 00 00 00 00 01 0c 00 00 00 00 00
301820: f0 ff 00 00 f1 ff 01 00 00 00 00 00 00 00 00 00
301930: 00 00 00 00 40 00 00 00 00 00 00 00 ff 01 00 00
302040: 01 60 03 78 08 00 00 00 00 00 00 00 00 00 00 00
302150: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
302260: 10 00 42 00 01 80 00 00 10 28 20 00 22 f0 63 00
302370: 00 00 21 10 00 00 00 00 00 00 40 00 10 00 01 00
302480: 00 00 00 00 12 00 00 00 00 00 00 00 00 00 00 00
302590: 02 00 01 00 00 00 00 00 00 00 00 00 00 00 00 00
3026a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
3027b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
3028c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
3029d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
3030e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
3031f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
3032
3033root@VP88x_2017_3_PRJ0191:/tmp# lspci --vvv
3034lspci: invalid option -- '-'
3035Usage: lspci [<switches>]
3036
3037Basic display modes:
3038-mm Produce machine-readable output (single -m for an obsolete format)
3039-t Show bus tree
3040
3041Display options:
3042-v Be verbose (-vv for very verbose)
3043-k Show kernel drivers handling each device
3044-x Show hex-dump of the standard part of the config space
3045-xxx Show hex-dump of the whole config space (dangerous; root only)
3046-xxxx Show hex-dump of the 4096-byte extended config space (root only)
3047-b Bus-centric view (addresses and IRQ's as seen by the bus)
3048-D Always show domain numbers
3049
3050Resolving of device ID's to names:
3051-n Show numeric ID's
3052-nn Show both textual and numeric ID's (names & numbers)
3053-q Query the PCI ID database for unknown ID's via DNS
3054-qq As above, but re-query locally cached entries
3055-Q Query the PCI ID database for all ID's via DNS
3056
3057Selection of devices:
3058-s [[[[<domain>]:]<bus>]:][<slot>][.[<func>]] Show only devices in selected slots
3059-d [<vendor>]:[<device>][:<class>] Show only devices with specified ID's
3060
3061Other options:
3062-i <file> Use specified ID database instead of /usr/share/pci.ids.gz
3063-p <file> Look up kernel modules in a given file instead of default modules.pcimap
3064-M Enable `bus mapping' mode (dangerous; root only)
3065
3066PCI access options:
3067-A <method> Use the specified PCI access method (see `-A help' for a list)
3068-O <par>=<val> Set PCI access parameter (see `-O help' for a list)
3069-G Enable PCI access debugging
3070-F <file> Read PCI configuration dump from a given file
3071root@VP88x_2017_3_PRJ0191:/tmp# lspci -vvv
307200:00.0 PCI bridge: Xilinx Corporation Device d024 (prog-if 00 [Normal decode])
3073 Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
3074 Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
3075 Interrupt: pin A routed to IRQ 255
3076 Bus: primary=00, secondary=01, subordinate=0c, sec-latency=0
3077 I/O behind bridge: 00000000-00000fff
3078 Memory behind bridge: fff00000-000fffff
3079 Prefetchable memory behind bridge: 00000000fff00000-00000000000fffff
3080 Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
3081 BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
3082 PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
3083 Capabilities: [40] Power Management version 3
3084 Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold-)
3085 Status: D0 NoSoftRst+ PME-Enable- DSel=0 DScale=0 PME-
3086 Capabilities: [60] Express (v2) Root Port (Slot-), MSI 00
3087 DevCap: MaxPayload 256 bytes, PhantFunc 0
3088 ExtTag- RBE+
3089 DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
3090 RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop+
3091 MaxPayload 128 bytes, MaxReadReq 512 bytes
3092 DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr- TransPend+
3093 LnkCap: Port #0, Speed 5GT/s, Width x2, ASPM not supported, Exit Latency L0s unlimited, L1 unlimited
3094 ClockPM- Surprise- LLActRep- BwNot+ ASPMOptComp+
3095 LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- CommClk-
3096 ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
3097 LnkSta: Speed 2.5GT/s, Width x2, TrErr- Train+ SlotClk+ DLActive- BWMgmt- ABWMgmt-
3098 RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal- PMEIntEna- CRSVisible+
3099 RootCap: CRSVisible+
3100 RootSta: PME ReqID 0000, PMEStatus- PMEPending-
3101 DevCap2: Completion Timeout: Range B, TimeoutDis+, LTR-, OBFF Not Supported ARIFwd-
3102 DevCtl2: Completion Timeout: 50us to 50ms, TimeoutDis-, LTR-, OBFF Disabled ARIFwd-
3103 LnkCtl2: Target Link Speed: 5GT/s, EnterCompliance- SpeedDis-
3104 Transmit Margin: Normal Operating Range, EnterModifiedCompliance- ComplianceSOS-
3105 Compliance De-emphasis: -6dB
3106 LnkSta2: Current De-emphasis Level: -3.5dB, EqualizationComplete-, EqualizationPhase1-
3107 EqualizationPhase2-, EqualizationPhase3-, LinkEqualizationRequest-
3108 Capabilities: [100 v1] Device Serial Number 00-00-00-00-00-00-00-00
3109 Capabilities: [10c v1] Virtual Channel
3110 Caps: LPEVC=0 RefClk=100ns PATEntryBits=1
3111 Arb: Fixed- WRR32- WRR64- WRR128-
3112 Ctrl: ArbSelect=Fixed
3113 Status: InProgress-
3114 VC0: Caps: PATOffset=00 MaxTimeSlots=1 RejSnoopTrans-
3115 Arb: Fixed- WRR32- WRR64- WRR128- TWRR128- WRR256-
3116 Ctrl: Enable+ ID=0 ArbSelect=Fixed TC/VC=ff
3117 Status: NegoPending- InProgress-
3118 Capabilities: [128 v1] Vendor Specific Information: ID=1234 Rev=1 Len=018 <?>
3119
3120root@VP88x_2017_3_PRJ0191:/tmp# ls /sys/
3121block/ class/ devices/ fs/ module/
3122bus/ dev/ firmware/ kernel/
3123root@VP88x_2017_3_PRJ0191:/tmp# ls /sys/
3124block/ class/ devices/ fs/ module/
3125bus/ dev/ firmware/ kernel/
3126root@VP88x_2017_3_PRJ0191:/tmp# ls /sys/bus/p
3127pci/ platform/
3128root@VP88x_2017_3_PRJ0191:/tmp# ls /sys/bus/p
3129pci/ platform/
3130root@VP88x_2017_3_PRJ0191:/tmp# ls /sys/bus/pci/
3131devices/ drivers_probe slots/
3132drivers/ rescan uevent
3133drivers_autoprobe resource_alignment
3134root@VP88x_2017_3_PRJ0191:/tmp# ls /sys/bus/pci/devices/0000\:00\:00.0
31350000:00:00.0/
3136root@VP88x_2017_3_PRJ0191:/tmp# ls /sys/bus/pci/devices/0000\:00\:00.0
31370000:00:00.0/
3138root@VP88x_2017_3_PRJ0191:/tmp# ls /sys/bus/pci/devices/0000\:00\:00.0/
3139broken_parity_status enable rescan
3140class irq resource
3141config local_cpulist subsystem/
3142consistent_dma_mask_bits local_cpus subsystem_device
3143device modalias subsystem_vendor
3144devspec msi_bus uevent
3145dma_mask_bits pci_bus/ vendor
3146driver_override remove
3147root@VP88x_2017_3_PRJ0191:/tmp# ls /sys/bus/pci/devices/0000\:00\:00.0/
3148broken_parity_status enable rescan
3149class irq resource
3150config local_cpulist subsystem/
3151consistent_dma_mask_bits local_cpus subsystem_device
3152device modalias subsystem_vendor
3153devspec msi_bus uevent
3154dma_mask_bits pci_bus/ vendor
3155driver_override remove
3156root@VP88x_2017_3_PRJ0191:/tmp# Xilinx Zynq MP First Stage Boot Loader nfig
3157Release 2017.3 May 24 2018 - 10:35:53
3158Marvell PHY reset
3159SI5338 0x70 not configured
3160SI5338 0x70 configuration finished
3161SI5338 0x71 not configured
3162SI5338 0x71 configuration finished
3163
3164
3165U-Boot 2017.01 (Jul 26 2018 - 02:50:11 -0600) Xilinx ZynqMP ZCU102 revB
3166
3167I2C: ready
3168DRAM: 2 GiB
3169EL Level: EL2
3170Chip ID: xczu3eg
3171MMC: Card did not respond to voltage select!
3172sdhci@ff160000 - probe failed: -95
3173Card did not respond to voltage select!
3174
3175zynqmp_qspi_ofdata_to_platdata: CLK 300000000
3176SF: Detected n25q1024 with page size 256 Bytes, erase size 64 KiB, total 128 MiB
3177*** Warning - bad CRC, using default environment
3178
3179In: serial
3180Out: serial
3181Err: serial
3182Bootmode: QSPI_MODE
3183Net: ZYNQ GEM: ff0c0000, phyaddr c, interface rgmii-id
3184eth0: ethernet@ff0c0000
3185U-BOOT for VP88x_2017_3_PRJ0191
3186
3187Hit any key to stop autoboot: 0
3188SF: Detected n25q1024 with page size 256 Bytes, erase size 64 KiB, total 128 MiB
3189device 0 offset 0x540000, size 0x2200000
3190SF: 35651584 bytes @ 0x540000 Read: OK
3191## Loading kernel from FIT Image at 10000000 ...
3192 Using 'conf@1' configuration
3193 Trying 'kernel@0' kernel subimage
3194 Description: Linux Kernel
3195 Type: Kernel Image
3196 Compression: uncompressed
3197 Data Start: 0x100000d8
3198 Data Size: 12503552 Bytes = 11.9 MiB
3199 Architecture: AArch64
3200 OS: Linux
3201 Load Address: 0x00080000
3202 Entry Point: 0x00080000
3203 Hash algo: sha1
3204 Hash value: 6738559f9c7602fa2a0ff36fdfc8cf5b9b3e6565
3205 Verifying Hash Integrity ... sha1+ OK
3206## Loading ramdisk from FIT Image at 10000000 ...
3207 Using 'conf@1' configuration
3208 Trying 'ramdisk@0' ramdisk subimage
3209 Description: ramdisk
3210 Type: RAMDisk Image
3211 Compression: uncompressed
3212 Data Start: 0x10bf54e4
3213 Data Size: 8973721 Bytes = 8.6 MiB
3214 Architecture: AArch64
3215 OS: Linux
3216 Load Address: unavailable
3217 Entry Point: unavailable
3218 Hash algo: sha1
3219 Hash value: 4b595c4e0c42ac8967d3d732b389c6521f0b492f
3220 Verifying Hash Integrity ... sha1+ OK
3221## Loading fdt from FIT Image at 10000000 ...
3222 Using 'conf@1' configuration
3223 Trying 'fdt@0' fdt subimage
3224 Description: Flattened Device Tree blob
3225 Type: Flat Device Tree
3226 Compression: uncompressed
3227 Data Start: 0x10becbd0
3228 Data Size: 34910 Bytes = 34.1 KiB
3229 Architecture: AArch64
3230 Hash algo: sha1
3231 Hash value: 20fc450d3d82f1967aba254f93c3704b6f5d1f6e
3232 Verifying Hash Integrity ... sha1+ OK
3233 Booting using the fdt blob at 0x10becbd0
3234 Loading Kernel Image ... OK
3235 Loading Ramdisk to 07771000, end 07fffd99 ... OK
3236 Loading Device Tree to 0000000007765000, end 000000000777085d ... OK
3237
3238Starting kernel ...
3239
3240[ 0.000000] Booting Linux on physical CPU 0x0
3241[ 0.000000] Linux version 4.9.0 (user@user-VirtualBox) (gcc version 6.2.1 20161016 (Linaro GCC 6.2-2016.11) ) #1 SMP Thu Jul 26 01:50:46 MDT 2018
3242[ 0.000000] Boot CPU: AArch64 Processor [410fd034]
3243[ 0.000000] earlycon: cdns0 at MMIO 0x00000000ff010000 (options '115200n8')
3244[ 0.000000] bootconsole [cdns0] enabled
3245[ 0.000000] efi: Getting EFI parameters from FDT:
3246[ 0.000000] efi: UEFI not found.
3247[ 0.000000] cma: Reserved 512 MiB at 0x0000000060000000
3248[ 0.000000] psci: probing for conduit method from DT.
3249[ 0.000000] psci: PSCIv1.0 detected in firmware.
3250[ 0.000000] psci: Using standard PSCI v0.2 function IDs
3251[ 0.000000] psci: MIGRATE_INFO_TYPE not supported.
3252[ 0.000000] percpu: Embedded 21 pages/cpu @ffffffc05ff76000 s46232 r8192 d31592 u86016
3253[ 0.000000] Detected VIPT I-cache on CPU0
3254[ 0.000000] CPU features: enabling workaround for ARM erratum 845719
3255[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 517120
3256[ 0.000000] Kernel command line: console=ttyPS0,115200 earlyprintk earlycon=cdns,mmio,0xFF010000,115200n8 uio_pdrv_genirq.of_id=generic-uio clk_ignore_unused cma=512M coherent_pool=64MiB
3257[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
3258[ 0.000000] Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes)
3259[ 0.000000] Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes)
3260[ 0.000000] Memory: 1519128K/2097152K available (8508K kernel code, 562K rwdata, 2636K rodata, 448K init, 382K bss, 53736K reserved, 524288K cma-reserved)
3261[ 0.000000] Virtual kernel memory layout:
3262[ 0.000000] modules : 0xffffff8000000000 - 0xffffff8008000000 ( 128 MB)
3263[ 0.000000] vmalloc : 0xffffff8008000000 - 0xffffffbebfff0000 ( 250 GB)
3264[ 0.000000] .text : 0xffffff8008080000 - 0xffffff80088d0000 ( 8512 KB)
3265[ 0.000000] .rodata : 0xffffff80088d0000 - 0xffffff8008b70000 ( 2688 KB)
3266[ 0.000000] .init : 0xffffff8008b70000 - 0xffffff8008be0000 ( 448 KB)
3267[ 0.000000] .data : 0xffffff8008be0000 - 0xffffff8008c6ca00 ( 563 KB)
3268[ 0.000000] .bss : 0xffffff8008c6ca00 - 0xffffff8008ccc434 ( 383 KB)
3269[ 0.000000] fixed : 0xffffffbefe7fd000 - 0xffffffbefec00000 ( 4108 KB)
3270[ 0.000000] PCI I/O : 0xffffffbefee00000 - 0xffffffbeffe00000 ( 16 MB)
3271[ 0.000000] vmemmap : 0xffffffbf00000000 - 0xffffffc000000000 ( 4 GB maximum)
3272[ 0.000000] 0xffffffbf00000000 - 0xffffffbf01c00000 ( 28 MB actual)
3273[ 0.000000] memory : 0xffffffc000000000 - 0xffffffc080000000 ( 2048 MB)
3274[ 0.000000] Hierarchical RCU implementation.
3275[ 0.000000] Build-time adjustment of leaf fanout to 64.
3276[ 0.000000] RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=4.
3277[ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=64, nr_cpu_ids=4
3278[ 0.000000] NR_IRQS:64 nr_irqs:64 0
3279[ 0.000000] GIC: Adjusting CPU interface base to 0x00000000f902f000
3280[ 0.000000] GIC: Using split EOI/Deactivate mode
3281[ 0.000000] arm_arch_timer: Architected cp15 timer(s) running at 50.00MHz (phys).
3282[ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0xb8812736b, max_idle_ns: 440795202655 ns
3283[ 0.000003] sched_clock: 56 bits at 50MHz, resolution 20ns, wraps every 4398046511100ns
3284[ 0.008251] Console: colour dummy device 80x25
3285[ 0.012519] Calibrating delay loop (skipped), value calculated using timer frequency.. 100.00 BogoMIPS (lpj=200000)
3286[ 0.022877] pid_max: default: 32768 minimum: 301
3287[ 0.027569] Mount-cache hash table entries: 4096 (order: 3, 32768 bytes)
3288[ 0.034129] Mountpoint-cache hash table entries: 4096 (order: 3, 32768 bytes)
3289[ 0.041856] ASID allocator initialised with 65536 entries
3290[ 0.047552] zynqmp_plat_init Power management API v0.3
3291[ 0.052570] EFI services will not be available.
3292[ 0.057332] Detected VIPT I-cache on CPU1
3293[ 0.057365] CPU1: Booted secondary processor [410fd034]
3294[ 0.057626] Detected VIPT I-cache on CPU2
3295[ 0.057642] CPU2: Booted secondary processor [410fd034]
3296[ 0.057892] Detected VIPT I-cache on CPU3
3297[ 0.057909] CPU3: Booted secondary processor [410fd034]
3298[ 0.057941] Brought up 4 CPUs
3299[ 0.088228] SMP: Total of 4 processors activated.
3300[ 0.092904] CPU features: detected feature: 32-bit EL0 Support
3301[ 0.098700] CPU: All CPU(s) started at EL2
3302[ 0.102773] alternatives: patching kernel code
3303[ 0.108033] devtmpfs: initialized
3304[ 0.115567] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
3305[ 0.136597] xor: measuring software checksum speed
3306[ 0.181269] 8regs : 2542.000 MB/sec
3307[ 0.221294] 8regs_prefetch: 2266.000 MB/sec
3308[ 0.265656] 32regs : 3125.000 MB/sec
3309[ 0.305683] 32regs_prefetch: 2627.000 MB/sec
3310[ 0.310104] xor: using function: 32regs (3125.000 MB/sec)
3311[ 0.315557] pinctrl core: initialized pinctrl subsystem
3312[ 0.321239] NET: Registered protocol family 16
3313[ 0.326328] Failed to initialise IOMMU /amba/smmu@fd800000
3314[ 0.331829] vdso: 2 pages (1 code @ ffffff80088d7000, 1 data @ ffffff8008be4000)
3315[ 0.339031] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers.
3316[ 0.374311] DMA: preallocated 65536 KiB pool for atomic allocations
3317[ 0.390724] reset_zynqmp reset-controller: Xilinx zynqmp reset driver probed
3318[ 0.398200] ARM CCI_400_r1 PMU driver probed[ 0.404972] zynqmp-pinctrl ff180000.pinctrl: zynqmp pinctrl initialized
3319[ 0.431691] HugeTLB registered 2 MB page size, pre-allocated 0 pages
3320[ 0.504960] raid6: int64x1 gen() 447 MB/s
3321[ 0.576917] raid6: int64x1 xor() 485 MB/s
3322[ 0.648953] raid6: int64x2 gen() 741 MB/s
3323[ 0.721006] raid6: int64x2 xor() 661 MB/s
3324[ 0.793052] raid6: int64x4 gen() 1086 MB/s
3325[ 0.865097] raid6: int64x4 xor() 812 MB/s
3326[ 0.937129] raid6: int64x8 gen() 1265 MB/s
3327[ 1.009184] raid6: int64x8 xor() 824 MB/s
3328[ 1.081198] raid6: neonx1 gen() 796 MB/s
3329[ 1.153246] raid6: neonx1 xor() 837 MB/s
3330[ 1.225283] raid6: neonx2 gen() 1285 MB/s
3331[ 1.297346] raid6: neonx2 xor() 1143 MB/s
3332[ 1.369387] raid6: neonx4 gen() 1666 MB/s
3333[ 1.441431] raid6: neonx4 xor() 1299 MB/s
3334[ 1.513488] raid6: neonx8 gen() 1753 MB/s
3335[ 1.585507] raid6: neonx8 xor() 1348 MB/s
3336[ 1.589586] raid6: using algorithm neonx8 gen() 1753 MB/s
3337[ 1.594948] raid6: .... xor() 1348 MB/s, rmw enabled
3338[ 1.599879] raid6: using intx1 recovery algorithm
3339[ 1.605035] Write failed gate address:1000f02
3340[ 1.612971] SCSI subsystem initialized
3341[ 1.616762] usbcore: registered new interface driver usbfs
3342[ 1.622084] usbcore: registered new interface driver hub
3343[ 1.627369] usbcore: registered new device driver usb
3344[ 1.632416] media: Linux media interface: v0.10
3345[ 1.636865] Linux video capture interface: v2.00
3346[ 1.641450] pps_core: LinuxPPS API ver. 1 registered
3347[ 1.646356] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
3348[ 1.655450] PTP clock support registered
3349[ 1.659349] EDAC MC: Ver: 3.0.0
3350[ 1.662713] FPGA manager framework
3351[ 1.666067] fpga-region fpga-full: FPGA Region probed
3352[ 1.671063] Advanced Linux Sound Architecture Driver Initialized.
3353[ 1.677320] Bluetooth: Core ver 2.22
3354[ 1.680721] NET: Registered protocol family 31
3355[ 1.685117] Bluetooth: HCI device and connection manager initialized
3356[ 1.691436] Bluetooth: HCI socket layer initialized
3357[ 1.696278] Bluetooth: L2CAP socket layer initialized
3358[ 1.701311] Bluetooth: SCO socket layer initialized
3359[ 1.706702] clocksource: Switched to clocksource arch_sys_counter
3360[ 1.712694] VFS: Disk quotas dquot_6.6.0
3361[ 1.716533] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
3362[ 1.726796] NET: Registered protocol family 2
3363[ 1.731344] TCP established hash table entries: 16384 (order: 5, 131072 bytes)
3364[ 1.738462] TCP bind hash table entries: 16384 (order: 6, 262144 bytes)
3365[ 1.745250] TCP: Hash tables configured (established 16384 bind 16384)
3366[ 1.751641] UDP hash table entries: 1024 (order: 3, 32768 bytes)
3367[ 1.757578] UDP-Lite hash table entries: 1024 (order: 3, 32768 bytes)
3368[ 1.764091] NET: Registered protocol family 1
3369[ 1.768531] RPC: Registered named UNIX socket transport module.
3370[ 1.774259] RPC: Registered udp transport module.
3371[ 1.778927] RPC: Registered tcp transport module.
3372[ 1.783597] RPC: Registered tcp NFSv4.1 backchannel transport module.
3373[ 1.790156] Trying to unpack rootfs image as initramfs...
3374[ 2.113488] Freeing initrd memory: 8760K (ffffffc007771000 - ffffffc007fff000)
3375[ 2.120905] hw perfevents: enabled with armv8_pmuv3 PMU driver, 7 counters available
3376[ 2.129211] futex hash table entries: 1024 (order: 5, 131072 bytes)
3377[ 2.135847] workingset: timestamp_bits=62 max_order=19 bucket_order=0
3378[ 2.142804] NFS: Registering the id_resolver key type
3379[ 2.147688] Key type id_resolver registered
3380[ 2.151820] Key type id_legacy registered
3381[ 2.155805] nfs4filelayout_init: NFSv4 File Layout Driver Registering...
3382[ 2.162475] ntfs: driver 2.1.32 [Flags: R/W].
3383[ 2.166803] jffs2: version 2.2. (NAND) (SUMMARY) © 2001-2006 Red Hat, Inc.
3384[ 2.181580] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 247)
3385[ 2.188791] io scheduler noop registered
3386[ 2.192674] io scheduler deadline registered
3387[ 2.196920] io scheduler cfq registered (default)
3388[ 2.202177] nwl-pcie fd0e0000.pcie: Link is UP
3389[ 2.206463] OF: PCI: host bridge /amba/pcie@fd0e0000 ranges:
3390[ 2.212067] OF: PCI: MEM 0xe0000000..0xefffffff -> 0xe0000000
3391[ 2.217935] OF: PCI: MEM 0x600000000..0x7ffffffff -> 0x600000000
3392[ 2.224160] nwl-pcie fd0e0000.pcie: PCI host bridge to bus 0000:00
3393[ 2.230221] pci_bus 0000:00: root bus resource [bus 00-ff]
3394[ 2.235666] pci_bus 0000:00: root bus resource [mem 0xe0000000-0xefffffff]
3395[ 2.242498] pci_bus 0000:00: root bus resource [mem 0x600000000-0x7ffffffff pref]
3396[ 2.250424] pci 0000:00:00.0: BAR 8: assigned [mem 0xe0000000-0xe00fffff]
3397[ 2.257018] pci 0000:01:00.0: BAR 0: assigned [mem 0xe0000000-0xe00007ff]
3398[ 2.263765] pci 0000:00:00.0: PCI bridge to [bus 01-0c]
3399[ 2.268956] pci 0000:00:00.0: bridge window [mem 0xe0000000-0xe00fffff]
3400[ 2.276424] xilinx-dpdma fd4c0000.dma: Xilinx DPDMA engine is probed
3401[ 2.282806] xilinx-vdma 400000000.dma: Xilinx AXI VDMA Engine Driver Probed!!
3402[ 2.289862] xilinx-vdma 400010000.dma: Xilinx AXI VDMA Engine Driver Probed!!
3403[ 2.297015] xilinx-zynqmp-dma fd500000.dma: ZynqMP DMA driver Probe success
3404[ 2.303872] xilinx-zynqmp-dma fd510000.dma: ZynqMP DMA driver Probe success
3405[ 2.310794] xilinx-zynqmp-dma fd520000.dma: ZynqMP DMA driver Probe success
3406[ 2.317715] xilinx-zynqmp-dma fd530000.dma: ZynqMP DMA driver Probe success
3407[ 2.324635] xilinx-zynqmp-dma fd540000.dma: ZynqMP DMA driver Probe success
3408[ 2.331552] xilinx-zynqmp-dma fd550000.dma: ZynqMP DMA driver Probe success
3409[ 2.338474] xilinx-zynqmp-dma fd560000.dma: ZynqMP DMA driver Probe success
3410[ 2.345394] xilinx-zynqmp-dma fd570000.dma: ZynqMP DMA driver Probe success
3411[ 2.352353] xilinx-zynqmp-dma ffa80000.dma: ZynqMP DMA driver Probe success
3412[ 2.359241] xilinx-zynqmp-dma ffa90000.dma: ZynqMP DMA driver Probe success
3413[ 2.366153] xilinx-zynqmp-dma ffaa0000.dma: ZynqMP DMA driver Probe success
3414[ 2.373075] xilinx-zynqmp-dma ffab0000.dma: ZynqMP DMA driver Probe success
3415[ 2.379995] xilinx-zynqmp-dma ffac0000.dma: ZynqMP DMA driver Probe success
3416[ 2.386915] xilinx-zynqmp-dma ffad0000.dma: ZynqMP DMA driver Probe success
3417[ 2.393835] xilinx-zynqmp-dma ffae0000.dma: ZynqMP DMA driver Probe success
3418[ 2.400755] xilinx-zynqmp-dma ffaf0000.dma: ZynqMP DMA driver Probe success
3419[ 2.428788] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
3420[ 2.436255] ff000000.serial: ttyPS1 at MMIO 0xff000000 (irq = 46, base_baud = 6250000) is a xuartps
3421[ 2.445274] ff010000.serial: ttyPS0 at MMIO 0xff010000 (irq = 47, base_baud =·r¢ª¢000) is a xuartps
3422 ºêconsole [ttyPS0] enabled
3423[ 2.454217] console [ttyPS0] enabled
3424[ 2.461181] bootconsole [cdns0] disabled
3425[ 2.461181] bootconsole [cdns0] disabled
3426[ 2.469203] Unable to detect cache hierarchy from DT for CPU 0
3427[ 2.479732] brd: module loaded
3428[ 2.485519] loop: module loaded
3429[ 2.489496] ahci-ceva fd0c0000.ahci: AHCI 0001.0301 32 slots 2 ports 6 Gbps 0x3 impl platform mode
3430[ 2.498372] ahci-ceva fd0c0000.ahci: flags: 64bit ncq sntf pm clo only pmp fbs pio slum part ccc sds apst
3431[ 2.509075] scsi host0: ahci-ceva
3432[ 2.512494] scsi host1: ahci-ceva
3433[ 2.515832] ata1: SATA max UDMA/133 mmio [mem 0xfd0c0000-0xfd0c1fff] port 0x100 irq 43
3434[ 2.523660] ata2: SATA max UDMA/133 mmio [mem 0xfd0c0000-0xfd0c1fff] port 0x180 irq 43
3435[ 2.531723] mtdoops: mtd device (mtddev=name/number) must be supplied
3436[ 2.539071] zynqmp-qspi ff0f0000.spi: rx bus width not found
3437[ 2.545003] m25p80 spi0.0: found n25q00, expected n25q512a
3438[ 2.550735] m25p80 spi0.0: n25q00 (131072 Kbytes)
3439[ 2.555371] 5 ofpart partitions found on MTD device spi0.0
3440[ 2.560817] Creating 5 MTD partitions on "spi0.0":
3441[ 2.565594] 0x000000000000-0x000000500000 : "boot"
3442[ 2.570848] 0x000000500000-0x000000540000 : "bootenv"
3443[ 2.576227] 0x000000540000-0x000002740000 : "kernel"
3444[ 2.581503] 0x000002740000-0x000003740000 : "user"
3445[ 2.586625] 0x000003740000-0x000003750000 : "test"
3446[ 2.592631] libphy: Fixed MDIO Bus: probed
3447[ 2.597743] tun: Universal TUN/TAP device driver, 1.6
3448[ 2.602711] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
3449[ 2.608983] CAN device driver interface
3450[ 2.613302] macb ff0c0000.ethernet: Not enabling partial store and forward
3451[ 2.620617] libphy: MACB_mii_bus: probed
3452[ 2.698977] macb ff0c0000.ethernet eth0: Cadence GEM rev 0x50070106 at 0xff0c0000 irq 30 (00:0a:35:00:22:01)
3453[ 2.708722] Marvell 88E1510 ff0c0000.etherne:00: attached PHY driver [Marvell 88E1510] (mii_bus:phy_addr=ff0c0000.etherne:00, irq=-1)
3454[ 2.721315] usbcore: registered new interface driver asix
3455[ 2.726679] usbcore: registered new interface driver ax88179_178a
3456[ 2.732724] usbcore: registered new interface driver cdc_ether
3457[ 2.738538] usbcore: registered new interface driver net1080
3458[ 2.744185] usbcore: registered new interface driver cdc_subset
3459[ 2.750083] usbcore: registered new interface driver zaurus
3460[ 2.755651] usbcore: registered new interface driver cdc_ncm
3461[ 2.761613] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
3462[ 2.768054] ehci-pci: EHCI PCI platform driver
3463[ 2.772712] usbcore: registered new interface driver uas
3464[ 2.777977] usbcore: registered new interface driver usb-storage
3465[ 2.784221] mousedev: PS/2 mouse device common for all mice
3466[ 2.790117] rtc_zynqmp ffa60000.rtc: rtc core: registered ffa60000.rtc as rtc0
3467[ 2.797285] i2c /dev entries driver
3468[ 2.800912] cdns-i2c ff020000.i2c: 400 kHz mmio ff020000 irq 32
3469[ 2.806962] cdns-i2c ff030000.i2c: 400 kHz mmio ff030000 irq 33
3470[ 2.813732] usbcore: registered new interface driver uvcvideo
3471[ 2.819397] USB Video Class driver (1.1.1)
3472[ 2.823836] Bluetooth: HCI UART driver ver 2.3
3473[ 2.828201] Bluetooth: HCI UART protocol H4 registered
3474[ 2.833318] Bluetooth: HCI UART protocol BCSP registered
3475[ 2.838612] Bluetooth: HCI UART protocol LL registered
3476[ 2.843733] Bluetooth: HCI UART protocol ATH3K registered
3477[ 2.844889] ata2: SATA link down (SStatus 0 SControl 330)
3478[ 2.854496] Bluetooth: HCI UART protocol Three-wire (H5) registered
3479[ 2.860783] Bluetooth: HCI UART protocol Intel registered
3480[ 2.866163] Bluetooth: HCI UART protocol Broadcom registered
3481[ 2.871771] Bluetooth: HCI UART protocol QCA registered
3482[ 2.877011] usbcore: registered new interface driver bcm203x
3483[ 2.882651] usbcore: registered new interface driver bpa10x
3484[ 2.888208] usbcore: registered new interface driver bfusb
3485[ 2.893677] usbcore: registered new interface driver btusb
3486[ 2.899113] Bluetooth: Generic Bluetooth SDIO driver ver 0.1
3487[ 2.904807] usbcore: registered new interface driver ath3k
3488[ 2.910343] EDAC MC: ECC not enabled
3489[ 2.913975] EDAC DEVICE0: Giving out device to module edac controller cache_err: DEV edac (POLLED)
3490[ 2.923015] EDAC DEVICE1: Giving out device to module zynqmp-ocm-edac controller zynqmp_ocm: DEV ff960000.memory-controller (INTERRUPT)
3491[ 2.935308] sdhci: Secure Digital Host Controller Interface driver
3492[ 2.941401] sdhci: Copyright(c) Pierre Ossman
3493[ 2.945740] sdhci-pltfm: SDHCI platform and OF driver helper
3494[ 2.998713] mmc0: SDHCI controller on ff160000.sdhci [ff160000.sdhci] using ADMA 64-bit
3495[ 3.002713] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 330)
3496[ 3.002920] ata1.00: ATA-8: InnoDisk SATA Slim D150Q, 120925, max UDMA/133
3497[ 3.002923] ata1.00: 15649200 sectors, multi 16: LBA NCQ (depth 31/32)
3498[ 3.003144] ata1.00: configured for UDMA/133
3499[ 3.003454] scsi 0:0:0:0: Direct-Access ATA InnoDisk SATA Sl 25 PQ: 0 ANSI: 5
3500[ 3.038688] ledtrig-cpu: registered to indicate activity on CPUs
3501[ 3.044754] usbcore: registered new interface driver usbhid
3502[ 3.050239] usbhid: USB HID core driver
3503[ 3.055661] fpga_manager fpga0: Xilinx ZynqMP FPGA Manager registered
3504[ 3.062534] xilinx-dp-snd-pcm dp_snd_pcm0: Xilinx DisplayPort Sound PCM probed
3505[ 3.069696] xilinx-dp-snd-pcm dp_snd_pcm1: Xilinx DisplayPort Sound PCM probed
3506[ 3.071019] sd 0:0:0:0: [sda] 15649200 512-byte logical blocks: (8.01 GB/7.46 GiB)
3507[ 3.071118] sd 0:0:0:0: [sda] Write Protect is off
3508[ 3.071165] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
3509[ 3.071994] sda: sda1
3510[ 3.072533] sd 0:0:0:0: [sda] Attached SCSI disk
3511[ 3.105377] PLL: shutdown
3512[ 3.108809] Write failed to divider address:fd1a007c
3513[ 3.113848] PLL: enable
3514[ 3.116373] xilinx-dp-snd-codec dp_snd_codec0: Xilinx DisplayPort Sound Codec probed
3515[ 3.124449] xilinx-dp-snd-card dp_snd_card: xilinx-dp-snd-codec-dai <-> xilinx-dp-snd-codec-dai mapping ok
3516[ 3.134124] xilinx-dp-snd-card dp_snd_card: xilinx-dp-snd-codec-dai <-> xilinx-dp-snd-codec-dai mapping ok
3517[ 3.143999] xilinx-dp-snd-card dp_snd_card: Xilinx DisplayPort Sound Card probed
3518[ 3.151424] pktgen: Packet Generator for packet performance testing. Version: 2.75
3519[ 3.159059] Netfilter messages via NETLINK v0.30.
3520[ 3.163807] ip_tables: (C) 2000-2006 Netfilter Core Team
3521[ 3.169096] Initializing XFRM netlink socket
3522[ 3.173361] NET: Registered protocol family 10
3523[ 3.178188] ip6_tables: (C) 2000-2006 Netfilter Core Team
3524[ 3.183551] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver
3525[ 3.189754] NET: Registered protocol family 17
3526[ 3.194123] NET: Registered protocol family 15
3527[ 3.198550] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this.
3528[ 3.211473] Ebtables v2.0 registered
3529[ 3.215080] can: controller area network core (rev 20120528 abi 9)
3530[ 3.221226] NET: Registered protocol family 29
3531[ 3.225622] can: raw protocol (rev 20120528)
3532[ 3.229872] can: broadcast manager protocol (rev 20161123 t)
3533[ 3.235517] can: netlink gateway (rev 20130117) max_hops=1
3534[ 3.241038] Bluetooth: RFCOMM TTY layer initialized
3535[ 3.245854] Bluetooth: RFCOMM socket layer initialized
3536[ 3.250985] Bluetooth: RFCOMM ver 1.11
3537[ 3.254700] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
3538[ 3.259991] Bluetooth: BNEP filters: protocol multicast
3539[ 3.265204] Bluetooth: BNEP socket layer initialized
3540[ 3.270148] Bluetooth: HIDP (Human Interface Emulation) ver 1.2
3541[ 3.276052] Bluetooth: HIDP socket layer initialized
3542[ 3.281178] 9pnet: Installing 9P2000 support
3543[ 3.285380] Key type dns_resolver registered
3544[ 3.291019] registered taskstats version 1
3545[ 3.295417] Btrfs loaded, crc32c=crc32c-generic
3546[ 3.307051] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller
3547[ 3.312470] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 1
3548[ 3.320917] xhci-hcd xhci-hcd.0.auto: hcc params 0x0238f625 hci version 0x100 quirks 0x02010010
3549[ 3.329566] xhci-hcd xhci-hcd.0.auto: irq 229, io mem 0xfe300000
3550[ 3.335641] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
3551[ 3.342343] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
3552[ 3.349545] usb usb1: Product: xHCI Host Controller
3553[ 3.354404] usb usb1: Manufacturer: Linux 4.9.0 xhci-hcd
3554[ 3.359698] usb usb1: SerialNumber: xhci-hcd.0.auto
3555[ 3.364866] hub 1-0:1.0: USB hub found
3556[ 3.368572] hub 1-0:1.0: 1 port detected
3557[ 3.372548] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller
3558[ 3.377951] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 2
3559[ 3.385618] usb usb2: We don't know the algorithms for LPM for this host, disabling LPM.
3560[ 3.393710] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003
3561[ 3.400427] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
3562[ 3.407630] usb usb2: Product: xHCI Host Controller
3563[ 3.412492] usb usb2: Manufacturer: Linux 4.9.0 xhci-hcd
3564[ 3.417785] usb usb2: SerialNumber: xhci-hcd.0.auto
3565[ 3.422858] hub 2-0:1.0: USB hub found
3566[ 3.426525] hub 2-0:1.0: 1 port detected
3567[ 3.430820] rtc_zynqmp ffa60000.rtc: setting system clock to 1970-01-01 00:00:15 UTC (15)
3568[ 3.439024] clk: Not disabling unused clocks
3569[ 3.443211] ALSA device list:
3570[ 3.446156] #0: DisplayPort monitor
3571[ 3.450962] Freeing unused kernel memory: 448K (ffffffc000b70000 - ffffffc000be0000)
3572INIT: version 2.88 booting
3573Starting udev
3574[ 3.565152] udevd[1624]: starting version 3.2
3575[ 3.569788] random: udevd: uninitialized urandom read (16 bytes read)
3576[ 3.576242] random: udevd: uninitialized urandom read (16 bytes read)
3577[ 3.582659] random: udevd: uninitialized urandom read (16 bytes read)
3578[ 3.589052] random: udevd: uninitialized urandom read (16 bytes read)
3579[ 3.599176] udevd[1625]: starting eudev-3.2
3580[ 3.642691] random: udevd: uninitialized urandom read (16 bytes read)
3581[ 3.652515] random: udevd: uninitialized urandom read (16 bytes read)
3582[ 3.662268] 4fm: loading out-of-tree module taints kernel.
3583[ 3.669416] pci 0000:00:00.0: enabling device (0000 -> 0002)
3584[ 3.675073] 4FM 0000:01:00.0: enabling device (0000 -> 0002)
3585[ 3.680690] Accessing 47232 of total 1 entries in dev->bar
3586[ 3.682524] <dma1> init: registered
3587[ 3.689667] dev->bar[u].virt_address:cfb607c value:38011121
3588[ 3.695170] dev->bar[u].virt_address:cfb6080 value:deadbeef
3589[ 3.700743] dev->bar[u].virt_address:cfb6084 value:baadf00d
3590[ 3.706282] dev->bar[u].virt_address:cfb6088 value:eba00eba
3591[ 3.711863] dev->bar[u].virt_address:cfb608c value:beefdeaf
3592[ 3.724087] <dma2> init: registered
3593[ 3.727971] /media/yocto4/vp880/VP88x_2017_3_PRJ0191/build/tmp/work/plnx_aarch64-xilinx-linux/4fm/1.0-r0/4fm.c: found 1 devices
3594[ 3.986919] FAT-fs (sda1): Volume was not properly unmounted. Some data may be corrupt. Please run fsck.
3595Populating dev cache
3596[ 4.245061] random: dd: uninitialized urandom read (512 bytes read)
3597Thu Jul 26 08:51:43 UTC 2018
3598Starting internet superserver: inetd.
3599Running postinst /etc/rpm-postinsts/100-sysvinit-inittab...
3600update-rc.d: /etc/init.d/run-postinsts exists during rc.d purge (continuing)
3601INIT: Entering runlevel: 5
3602Hello World
3603[22]:0x12
3604[20]:0x201
3605[20]:0x201
3606[22]:0x1
3607[0]:0x140
3608[0]:0x140
3609Configuring network interfaces... [ 4.544769] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
3610done.
3611Starting Dropbear SSH server: [ 4.573967] random: dropbearkey: uninitialized urandom read (32 bytes read)
3612[ 4.584012] random: dropbearkey: uninitialized urandom read (32 bytes read)
3613Generating key, this may take a while...
3614[ 5.554821] macb ff0c0000.ethernet eth0: link up (1000/Full)
3615[ 5.560422] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
3616[ 5.741268] random: dropbearkey: uninitialized urandom read (32 bytes read)
3617Public key portion is:
3618ssh-rsa AAAAB3NzaC1yc2EAAAADAQABAAABAQC9xlsTqalDEA0RUf1E/Y7jnVGREaQP9oKeSvQFVawVgvvkMIvaW1w2mXs7n+hOeOefuPN04fJKdREbaK7pB9ThY0GFPWyg7wo0mjBY7DYI/E7tlIXdTHehwrEhvVRdAIF3hLaagjDLT5S29keqBD5UhpQ40LIJgUCJRVGzo4rTnT3uDugK/0zGZZE8kUWnfbfn7qtAJB5Wb6x/qMQgYpX+BboJLJDQIE5kG5hbsjoe1mAP/259miF2yIiEaLqjukRao1Z7QQ5Ulr0aDpy3L4aXlFshVA2NQCWPRTVUTxtdBY9kaz0EAsHUQ8757k9QSHRlb44qsJcq4G5xQYqSS70l root@VP88x_2017_3_PRJ0191
3619Fingerprint: md5 77:8a:d8:04:25:85:cf:1c:75:1a:8c:8f:53:[ 5.794184] random: fast init done
362049:fa:06
3621dropbear.
3622Starting syslogd/klogd: done
3623[ 6.249535] random: crng init done
3624[ 8.055369] jffs2: notice: (2116) jffs2_build_xattr_subsystem: complete building xattr subsystem, 0 of xdatum (0 unchecked, 0 orphan) and 0 of xref (0 dead, 0 orphan) found.
3625hello world.....
3626Starting tcf-agent: OK
3627
3628root@VP88x_2017_3_PRJ0191:~# cd /mnt/
3629root@VP88x_2017_3_PRJ0191:/mnt# chmod +x *
3630root@VP88x_2017_3_PRJ0191:/mnt# ./diagnostic.elf
3631enter number of cyclic (0 - for infinite)
36321
3633SPI1 result = 0 SUCCESS
3634Opened device VP880. PCIe read from CID 0x2000: 2f70013
3635PCIe result = 0 SUCCESS
3636
3637--- AMS zynq PS System monitor---
3638temperature ps 59.10C
3639vcc_psintlp 0.87V
3640vcc_psintfp 0.87V
3641vcc_psaux 1.81V
3642vcc_psddr_504 1.21V
3643vcc_psio3_503 3.24V
3644vcc_psio0_500 3.24V
3645vcc_psio1_501 1.80V
3646vcc_psio2_502 1.80V
3647vcc_psmgtravcc 0.87V
3648vcc_psmgtravtt 1.81V
3649---------------------------------
3650
3651--- AMS zynq PL System monitor---
3652temperature pl 56.73C
3653vcc_int 0.87V
3654vcc_aux 1.81V
3655vcc_bram 0.87V
3656vcc_psintlp 0.87V
3657vcc_psintfp 0.87V
3658vcc_psaux 1.81V
3659vcc_vuser1 0.00V
3660vcc_vuser2 0.00V
3661vcc_vuser3 0.00V
3662vcc_vuser4 0.00V
3663---------------------------------
3664ranran.............temperature 30 C
3665vmon_fmc_vadj 1.79V
3666vmon_fmc_viob 1.79V
3667vmon_sblast_vcore 1.64V
3668vmon_sblast_vio 1.48V
3669vmon_2v5_mgt_refclk 2.44V
3670vmon_3v3_mgt_refclk 3.22V
3671vmon_1v2 1.18V
3672vmon_1v4 1.40V
3673vmon_vaux 3.32V
3674VPX_SYS_RST_N :1
3675PS_ERROR_STATUS :1
3676PS_ERROR_OUT :1
3677PS_INIT_B :1
3678PS_DONE :1
3679INIT_B :1
3680DONE :1
3681FLASH_A26 :1
3682HSC_12V_PG :1
3683HSC_5V_PG :1
3684VPX_GAP :1
3685VPX_GA4 :1
3686VPX_GA3 :1
3687VPX_GA2 :1
3688VPX_GA1 :1
3689VPX_GA0 :1
3690PG_LED_N :1
3691ZYNQ_CONFDONE_LED :1
3692FPGA_CONFDONE_LED :1
3693FMC_VADJ_VS0 :1
3694FMC_VADJ_VS1 :1
3695FMC_VADJ_VS2 :1
3696VADJ_FMC_EN_L :1
3697FMC_BYPASS :1
3698HSC_ON :1
3699HSC_3V3_PG :1
3700PG_C2M_3V3 :1
3701MGT_PG :1
3702DDR4_VTT_PG :1
3703DDR4_PG :1
3704PG_FPGA_CORE :1
37051V8_LOC_2V5_VPP_PG :1
3706HSC Source channel 1 3.250V
3707HSC Source channel 2 5.031V
3708HSC ADIN channel 1 0.423V
3709HSC ADIN channel 2 0.423V
3710HSC Sense channel 1 14.688mV
3711HSC Current channel 1 2.938A
3712HSC Sense channel 2 2.688mV
3713HSC Current channel 2 0.896A
3714HSC Power channel 1 9.547W
3715HSC Power channel 2 4.507W
3716---------------------------------------------------
3717HSC Source channel 1 2.500V
3718HSC Source channel 2 11.906V
3719HSC ADIN channel 1 0.423V
3720HSC ADIN channel 2 0.421V
3721HSC Sense channel 1 0.000mV
3722HSC Current channel 1 0.000A
3723HSC Sense channel 2 4.625mV
3724HSC Current channel 2 0.925A
3725HSC Power channel 1 0.000W
3726HSC Power channel 2 11.013W
3727---------------------------------------------------
3728HOSTIF version 1.0.0.5
3729read fpga values
3730temp_pl 51.303833
3731vcc_int 0.955078
3732vcc_aux 1.801758
3733vcc_bram 0.958008
3734vcc_vuser0 1.500000
3735vcc_vuser1 1.186523
3736vcc_vuser2 0.000000
3737vcc_vuser3 0.000000
3738MMC result =SUCCESS
3739PING 192.168.1.20 (192.168.1.20): 56 data bytes
374064 bytes from 192.168.1.20: seq=0 ttl=128 time=0.678 ms
3741
3742--- 192.168.1.20 ping statistics ---
37431 packets transmitted, 1 packets received, 0% packet loss
3744round-trip min/avg/max = 0.678/0.678/0.678 ms
3745Ethernet result = 0 SUCCESS
3746UnitAPI version : 1.3.8 : Enumerating units in the system, please wait...
3747
3748Global Units:
3749Global Unit 0 is on Device 'VP880' (P0): Internal Unit 0 is star 0x01C4 (axi_vp880_8l_host_if) with index 1 of star type 0x000D (Host Interface)
3750Global Unit 1 is on Device 'VP880' (P0): Internal Unit 1 is star 0x0203 (Unknown) with index 0 of star type 0x0005 (ADC)
3751Global Unit 2 is on Device 'VP880' (P0): Internal Unit 2 is star 0x015C (axi_intrc16) with index 0 of star type 0x0014 (Interrupt Controller)
3752Global Unit 3 is on Device 'VP880' (P0): Internal Unit 3 is star 0x014C (axi_i2c_master) with index 0 of star type 0x000E (3rd Party Logic)
3753Global Unit 4 is on Device 'VP880' (P0): Internal Unit 4 is star 0x0202 (Unknown) with index 0 of star type 0x0003 (Memory FIFO)
3754Global Unit 5 is on Device 'VP880' (P0): Internal Unit 5 is star 0x01C5 (axi_vp880_ddr4_fifo) with index 0 of star type 0x0003 (Memory FIFO)
3755
3756
3757Running 'VP880-FMC134' on PCIe, CID725
3758
3759-----------------------------------------------------------
3760Device 'VP880' (P0)
3761-----------------------------------------------------------
3762Constellation ID : 759
3763Number Of Stars : 19
3764Software Build Code: 1524177589 (Thu Apr 19 22:39:49 2018)
3765Firmware Build Code: 0
3766Firmware Revision : 1.2
3767-----------------------------------------------------------
3768
3769FMC detected
3770FMC result = 0 SUCCESS
3771memory test: OK
3772Memory result = 0 SUCCESS
3773DISK: OK
3774DISK result = 0 SUCCESS
3775FLASH: OK
3776FLASH result = 0 SUCCESS
3777read returned 9
3778RFFE result = 0 SUCCESS
3779root@VP88x_2017_3_PRJ0191:/mnt# cp /sys/bus/pci/
3780devices/ drivers_probe slots/
3781drivers/ rescan uevent
3782drivers_autoprobe resource_alignment
3783root@VP88x_2017_3_PRJ0191:/mnt# cp /sys/bus/pci/
3784devices/ drivers_probe slots/
3785drivers/ rescan uevent
3786drivers_autoprobe resource_alignment
3787root@VP88x_2017_3_PRJ0191:/mnt# cp /sys/bus/pci/devices/0000\:0
37880000:00:00.0/ 0000:01:00.0/
3789root@VP88x_2017_3_PRJ0191:/mnt# cp /sys/bus/pci/devices/0000\:00\:00.0/
37900000:01:00.0/ driver_override remove
3791broken_parity_status enable rescan
3792class irq resource
3793config local_cpulist subsystem/
3794consistent_dma_mask_bits local_cpus subsystem_device
3795device modalias subsystem_vendor
3796devspec msi_bus uevent
3797dma_mask_bits pci_bus/ vendor
3798root@VP88x_2017_3_PRJ0191:/mnt# cp /sys/bus/pci/devices/0000\:00\:00.0/config > /mnt/pciconfig0
3799BusyBox v1.24.1 (2018-05-24 10:33:04 MDT) multi-call binary.
3800
3801Usage: cp [OPTIONS] SOURCE... DEST
3802
3803Copy SOURCE(s) to DEST
3804
3805 -a Same as -dpR
3806 -R,-r Recurse
3807 -d,-P Preserve symlinks (default if -R)
3808 -L Follow all symlinks
3809 -H Follow symlinks on command line
3810 -p Preserve file attributes if possible
3811 -f Overwrite
3812 -i Prompt before overwrite
3813 -l,-s Create (sym)links
3814root@VP88x_2017_3_PRJ0191:/mnt# cp /sys/bus/pci/devices/0000\:00\:00.0/config /
3815mnt/pciconfig0
3816root@VP88x_2017_3_PRJ0191:/mnt# cp /sys/bus/pci/devices/0000\:01\:00.0/config /
3817mnt/pciconfig1
3818root@VP88x_2017_3_PRJ0191:/mnt# sync
3819root@VP88x_2017_3_PRJ0191:/mnt# echo 1 > /sys/bus/pci/devices/0000\:00\:00.0/res
3820rescan resource
3821root@VP88x_2017_3_PRJ0191:/mnt# echo 1 > /sys/bus/pci/devices/0000\:00\:00.0/res
3822rescan resource
3823root@VP88x_2017_3_PRJ0191:/mnt# echo 1 > /sys/bus/pci/devices/0000\:00\:00.0/res
3824rescan resource
3825root@VP88x_2017_3_PRJ0191:/mnt# echo 1 > /sys/bus/pci/devices/0000\:00\:00.0/rescan
3826root@VP88x_2017_3_PRJ0191:/mnt#
3827root@VP88x_2017_3_PRJ0191:/mnt#
3828root@VP88x_2017_3_PRJ0191:/mnt#
3829root@VP88x_2017_3_PRJ0191:/mnt# ./diagnostic.elf
3830enter number of cyclic (0 - for infinite)
38311
3832SPI1 result = 0 SUCCESS
3833Opened device VP880. PCIe read from CID 0x2000: 2f70013
3834PCIe result = 0 SUCCESS
3835
3836--- AMS zynq PS System monitor---
3837temperature ps 57.91C
3838vcc_psintlp 0.87V
3839vcc_psintfp 0.87V
3840vcc_psaux 1.81V
3841vcc_psddr_504 1.21V
3842vcc_psio3_503 3.24V
3843vcc_psio0_500 3.24V
3844vcc_psio1_501 1.80V
3845vcc_psio2_502 1.80V
3846vcc_psmgtravcc 0.87V
3847vcc_psmgtravtt 1.80V
3848---------------------------------
3849
3850--- AMS zynq PL System monitor---
3851temperature pl 55.69C
3852vcc_int 0.87V
3853vcc_aux 1.81V
3854vcc_bram 0.87V
3855vcc_psintlp 0.87V
3856vcc_psintfp 0.87V
3857vcc_psaux 1.81V
3858vcc_vuser1 0.00V
3859vcc_vuser2 0.00V
3860vcc_vuser3 0.00V
3861vcc_vuser4 0.00V
3862---------------------------------
3863ranran.............temperature 29 C
3864vmon_fmc_vadj 1.79V
3865vmon_fmc_viob 1.79V
3866vmon_sblast_vcore 1.64V
3867vmon_sblast_vio 1.48V
3868vmon_2v5_mgt_refclk 2.44V
3869vmon_3v3_mgt_refclk 3.22V
3870vmon_1v2 1.18V
3871vmon_1v4 1.40V
3872vmon_vaux 3.31V
3873VPX_SYS_RST_N :1
3874PS_ERROR_STATUS :1
3875PS_ERROR_OUT :1
3876PS_INIT_B :1
3877PS_DONE :1
3878INIT_B :1
3879DONE :1
3880FLASH_A26 :1
3881HSC_12V_PG :1
3882HSC_5V_PG :1
3883VPX_GAP :1
3884VPX_GA4 :1
3885VPX_GA3 :1
3886VPX_GA2 :1
3887VPX_GA1 :1
3888VPX_GA0 :1
3889PG_LED_N :1
3890ZYNQ_CONFDONE_LED :1
3891FPGA_CONFDONE_LED :1
3892FMC_VADJ_VS0 :1
3893FMC_VADJ_VS1 :1
3894FMC_VADJ_VS2 :1
3895VADJ_FMC_EN_L :1
3896FMC_BYPASS :1
3897HSC_ON :1
3898HSC_3V3_PG :1
3899PG_C2M_3V3 :1
3900MGT_PG :1
3901DDR4_VTT_PG :1
3902DDR4_PG :1
3903PG_FPGA_CORE :1
39041V8_LOC_2V5_VPP_PG :1
3905HSC Source channel 1 3.250V
3906HSC Source channel 2 5.031V
3907HSC ADIN channel 1 0.423V
3908HSC ADIN channel 2 0.423V
3909HSC Sense channel 1 14.625mV
3910HSC Current channel 1 2.925A
3911HSC Sense channel 2 2.625mV
3912HSC Current channel 2 0.875A
3913HSC Power channel 1 9.506W
3914HSC Power channel 2 4.402W
3915---------------------------------------------------
3916HSC Source channel 1 2.500V
3917HSC Source channel 2 11.906V
3918HSC ADIN channel 1 0.423V
3919HSC ADIN channel 2 0.423V
3920HSC Sense channel 1 0.000mV
3921HSC Current channel 1 0.000A
3922HSC Sense channel 2 4.562mV
3923HSC Current channel 2 0.913A
3924HSC Power channel 1 0.000W
3925HSC Power channel 2 10.864W
3926---------------------------------------------------
3927HOSTIF version 1.0.0.5
3928read fpga values
3929temp_pl 51.303833
3930vcc_int 0.958008
3931vcc_aux 1.801758
3932vcc_bram 0.958008
3933vcc_vuser0 1.500000
3934vcc_vuser1 1.186523
3935vcc_vuser2 0.000000
3936vcc_vuser3 0.000000
3937MMC result =SUCCESS
3938PING 192.168.1.20 (192.168.1.20): 56 data bytes
393964 bytes from 192.168.1.20: seq=0 ttl=128 time=0.590 ms
3940
3941--- 192.168.1.20 ping statistics ---
39421 packets transmitted, 1 packets received, 0% packet loss
3943round-trip min/avg/max = 0.590/0.590/0.590 ms
3944Ethernet result = 0 SUCCESS
3945UnitAPI version : 1.3.8 : Enumerating units in the system, please wait...
3946
3947Global Units:
3948Global Unit 0 is on Device 'VP880' (P0): Internal Unit 0 is star 0x01C4 (axi_vp880_8l_host_if) with index [ 146.284374] Trying to free nonexistent resource <0000000400000000-000000040000ffff>
39491 of star type 0x000D (Host Interface)
3950Global Unit 1 is on Devi[ 146.296529] Trying to free nonexistent resource <0000000400010000-000000040001ffff>
3951ce 'VP880' (P0): Internal Unit 1 is star 0x0203 (Unknown) with index 0 of star type 0x0005 (ADC)
3952Global Unit 2 is on Device 'VP880' (P0): Internal Unit 2 is star 0x015C (axi_intrc16) with index 0 of star type 0x0014 (Interrupt Controller)
3953Global Unit 3 is on Device 'VP880' (P0): Internal Unit 3 is star 0x014C (axi_i2c_master) with index 0 of star type 0x000E (3rd Party Logic)
3954Global Unit 4 is on Device 'VP880' (P0): Internal Unit 4 is star 0x0202 (Unknown) with index 0 of star type 0x0003 (Memory FIFO)
3955Global Unit 5 is on Device 'VP880' (P0): Internal Unit 5 is star 0x01C5 (axi_vp880_ddr4_fifo) with index 0 of star type 0x0003 (Memory FIFO)
3956
3957
3958Running 'VP880-FMC134' on PCIe, CID725
3959
3960-----------------------------------------------------------
3961Device 'VP880' (P0)
3962-----------------------------------------------------------
3963Constellation ID : 759
3964Number Of Stars : 19
3965Software Build Code: 1524177589 (Thu Apr 19 22:39:49 2018)
3966Firmware Build Code: 0
3967Firmware Revision : 1.2
3968-----------------------------------------------------------
3969
3970FMC detected
3971FMC result = 0 SUCCESS
3972memory test: OK
3973Memory result = 0 SUCCESS
3974DISK: OK
3975DISK result = 0 SUCCESS
3976FLASH: OK
3977FLASH result = 0 SUCCESS
3978read returned 9
3979RFFE result = 0 SUCCESS
3980root@VP88x_2017_3_PRJ0191:/mnt#
3981root@VP88x_2017_3_PRJ0191:/mnt#
3982root@VP88x_2017_3_PRJ0191:/mnt#
3983root@VP88x_2017_3_PRJ0191:/mnt#
3984root@VP88x_2017_3_PRJ0191:/mnt#
3985root@VP88x_2017_3_PRJ0191:/mnt# echo 1 > /sys/bus/pci/devices/0000\:0
39860000:00:00.0/ 0000:01:00.0/
3987root@VP88x_2017_3_PRJ0191:/mnt# echo 1 > /sys/bus/pci/devices/0000\:0^C
3988root@VP88x_2017_3_PRJ0191:/mnt# reXilinx Zynq MP First Stage Boot Loader
3989Release 2017.3 May 24 2018 - 10:35:53
3990Marvell PHY reset
3991SI5338 0x70 not configured
3992SI5338 0x70 configuration finished
3993SI5338 0x71 not configured
3994SI5338 0x71 configuration finished
3995
3996
3997U-Boot 2017.01 (Jul 26 2018 - 02:50:11 -0600) Xilinx ZynqMP ZCU102 revB
3998
3999I2C: ready
4000DRAM: 2 GiB
4001EL Level: EL2
4002Chip ID: xczu3eg
4003MMC: Card did not respond to voltage select!
4004sdhci@ff160000 - probe failed: -95
4005Card did not respond to voltage select!
4006
4007zynqmp_qspi_ofdata_to_platdata: CLK 300000000
4008SF: Detected n25q1024 with page size 256 Bytes, erase size 64 KiB, total 128 MiB
4009*** Warning - bad CRC, using default environment
4010
4011In: serial
4012Out: serial
4013Err: serial
4014Bootmode: QSPI_MODE
4015Net: ZYNQ GEM: ff0c0000, phyaddr c, interface rgmii-id
4016eth0: ethernet@ff0c0000
4017U-BOOT for VP88x_2017_3_PRJ0191
4018
4019Hit any key to stop autoboot: 0
4020SF: Detected n25q1024 with page size 256 Bytes, erase size 64 KiB, total 128 MiB
4021device 0 offset 0x540000, size 0x2200000
4022SF: 35651584 bytes @ 0x540000 Read: OK
4023## Loading kernel from FIT Image at 10000000 ...
4024 Using 'conf@1' configuration
4025 Trying 'kernel@0' kernel subimage
4026 Description: Linux Kernel
4027 Type: Kernel Image
4028 Compression: uncompressed
4029 Data Start: 0x100000d8
4030 Data Size: 12503552 Bytes = 11.9 MiB
4031 Architecture: AArch64
4032 OS: Linux
4033 Load Address: 0x00080000
4034 Entry Point: 0x00080000
4035 Hash algo: sha1
4036 Hash value: 6738559f9c7602fa2a0ff36fdfc8cf5b9b3e6565
4037 Verifying Hash Integrity ... sha1+ OK
4038## Loading ramdisk from FIT Image at 10000000 ...
4039 Using 'conf@1' configuration
4040 Trying 'ramdisk@0' ramdisk subimage
4041 Description: ramdisk
4042 Type: RAMDisk Image
4043 Compression: uncompressed
4044 Data Start: 0x10bf54e4
4045 Data Size: 8973721 Bytes = 8.6 MiB
4046 Architecture: AArch64
4047 OS: Linux
4048 Load Address: unavailable
4049 Entry Point: unavailable
4050 Hash algo: sha1
4051 Hash value: 4b595c4e0c42ac8967d3d732b389c6521f0b492f
4052 Verifying Hash Integrity ... sha1+ OK
4053## Loading fdt from FIT Image at 10000000 ...
4054 Using 'conf@1' configuration
4055 Trying 'fdt@0' fdt subimage
4056 Description: Flattened Device Tree blob
4057 Type: Flat Device Tree
4058 Compression: uncompressed
4059 Data Start: 0x10becbd0
4060 Data Size: 34910 Bytes = 34.1 KiB
4061 Architecture: AArch64
4062 Hash algo: sha1
4063 Hash value: 20fc450d3d82f1967aba254f93c3704b6f5d1f6e
4064 Verifying Hash Integrity ... sha1+ OK
4065 Booting using the fdt blob at 0x10becbd0
4066 Loading Kernel Image ... OK
4067 Loading Ramdisk to 07771000, end 07fffd99 ... OK
4068 Loading Device Tree to 0000000007765000, end 000000000777085d ... OK
4069
4070Starting kernel ...
4071
4072[ 0.000000] Booting Linux on physical CPU 0x0
4073[ 0.000000] Linux version 4.9.0 (user@user-VirtualBox) (gcc version 6.2.1 20161016 (Linaro GCC 6.2-2016.11) ) #1 SMP Thu Jul 26 01:50:46 MDT 2018
4074[ 0.000000] Boot CPU: AArch64 Processor [410fd034]
4075[ 0.000000] earlycon: cdns0 at MMIO 0x00000000ff010000 (options '115200n8')
4076[ 0.000000] bootconsole [cdns0] enabled
4077[ 0.000000] efi: Getting EFI parameters from FDT:
4078[ 0.000000] efi: UEFI not found.
4079[ 0.000000] cma: Reserved 512 MiB at 0x0000000060000000
4080[ 0.000000] psci: probing for conduit method from DT.
4081[ 0.000000] psci: PSCIv1.0 detected in firmware.
4082[ 0.000000] psci: Using standard PSCI v0.2 function IDs
4083[ 0.000000] psci: MIGRATE_INFO_TYPE not supported.
4084[ 0.000000] percpu: Embedded 21 pages/cpu @ffffffc05ff76000 s46232 r8192 d31592 u86016
4085[ 0.000000] Detected VIPT I-cache on CPU0
4086[ 0.000000] CPU features: enabling workaround for ARM erratum 845719
4087[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 517120
4088[ 0.000000] Kernel command line: console=ttyPS0,115200 earlyprintk earlycon=cdns,mmio,0xFF010000,115200n8 uio_pdrv_genirq.of_id=generic-uio clk_ignore_unused cma=512M coherent_pool=64MiB
4089[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
4090[ 0.000000] Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes)
4091[ 0.000000] Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes)
4092[ 0.000000] Memory: 1519128K/2097152K available (8508K kernel code, 562K rwdata, 2636K rodata, 448K init, 382K bss, 53736K reserved, 524288K cma-reserved)
4093[ 0.000000] Virtual kernel memory layout:
4094[ 0.000000] modules : 0xffffff8000000000 - 0xffffff8008000000 ( 128 MB)
4095[ 0.000000] vmalloc : 0xffffff8008000000 - 0xffffffbebfff0000 ( 250 GB)
4096[ 0.000000] .text : 0xffffff8008080000 - 0xffffff80088d0000 ( 8512 KB)
4097[ 0.000000] .rodata : 0xffffff80088d0000 - 0xffffff8008b70000 ( 2688 KB)
4098[ 0.000000] .init : 0xffffff8008b70000 - 0xffffff8008be0000 ( 448 KB)
4099[ 0.000000] .data : 0xffffff8008be0000 - 0xffffff8008c6ca00 ( 563 KB)
4100[ 0.000000] .bss : 0xffffff8008c6ca00 - 0xffffff8008ccc434 ( 383 KB)
4101[ 0.000000] fixed : 0xffffffbefe7fd000 - 0xffffffbefec00000 ( 4108 KB)
4102[ 0.000000] PCI I/O : 0xffffffbefee00000 - 0xffffffbeffe00000 ( 16 MB)
4103[ 0.000000] vmemmap : 0xffffffbf00000000 - 0xffffffc000000000 ( 4 GB maximum)
4104[ 0.000000] 0xffffffbf00000000 - 0xffffffbf01c00000 ( 28 MB actual)
4105[ 0.000000] memory : 0xffffffc000000000 - 0xffffffc080000000 ( 2048 MB)
4106[ 0.000000] Hierarchical RCU implementation.
4107[ 0.000000] Build-time adjustment of leaf fanout to 64.
4108[ 0.000000] RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=4.
4109[ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=64, nr_cpu_ids=4
4110[ 0.000000] NR_IRQS:64 nr_irqs:64 0
4111[ 0.000000] GIC: Adjusting CPU interface base to 0x00000000f902f000
4112[ 0.000000] GIC: Using split EOI/Deactivate mode
4113[ 0.000000] arm_arch_timer: Architected cp15 timer(s) running at 50.00MHz (phys).
4114[ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0xb8812736b, max_idle_ns: 440795202655 ns
4115[ 0.000003] sched_clock: 56 bits at 50MHz, resolution 20ns, wraps every 4398046511100ns
4116[ 0.008255] Console: colour dummy device 80x25
4117[ 0.012528] Calibrating delay loop (skipped), value calculated using timer frequency.. 100.00 BogoMIPS (lpj=200000)
4118[ 0.022886] pid_max: default: 32768 minimum: 301
4119[ 0.027578] Mount-cache hash table entries: 4096 (order: 3, 32768 bytes)
4120[ 0.034137] Mountpoint-cache hash table entries: 4096 (order: 3, 32768 bytes)
4121[ 0.041865] ASID allocator initialised with 65536 entries
4122[ 0.047562] zynqmp_plat_init Power management API v0.3
4123[ 0.052577] EFI services will not be available.
4124[ 0.057339] Detected VIPT I-cache on CPU1
4125[ 0.057374] CPU1: Booted secondary processor [410fd034]
4126[ 0.057633] Detected VIPT I-cache on CPU2
4127[ 0.057650] CPU2: Booted secondary processor [410fd034]
4128[ 0.057900] Detected VIPT I-cache on CPU3
4129[ 0.057916] CPU3: Booted secondary processor [410fd034]
4130[ 0.057949] Brought up 4 CPUs
4131[ 0.088237] SMP: Total of 4 processors activated.
4132[ 0.092913] CPU features: detected feature: 32-bit EL0 Support
4133[ 0.098710] CPU: All CPU(s) started at EL2
4134[ 0.102782] alternatives: patching kernel code
4135[ 0.108040] devtmpfs: initialized
4136[ 0.115567] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
4137[ 0.136591] xor: measuring software checksum speed
4138[ 0.181263] 8regs : 2543.000 MB/sec
4139[ 0.221287] 8regs_prefetch: 2266.000 MB/sec
4140[ 0.265656] 32regs : 3125.000 MB/sec
4141[ 0.305683] 32regs_prefetch: 2627.000 MB/sec
4142[ 0.310104] xor: using function: 32regs (3125.000 MB/sec)
4143[ 0.315560] pinctrl core: initialized pinctrl subsystem
4144[ 0.321244] NET: Registered protocol family 16
4145[ 0.326405] Failed to initialise IOMMU /amba/smmu@fd800000
4146[ 0.331903] vdso: 2 pages (1 code @ ffffff80088d7000, 1 data @ ffffff8008be4000)
4147[ 0.339109] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers.
4148[ 0.374452] DMA: preallocated 65536 KiB pool for atomic allocations
4149[ 0.390825] reset_zynqmp reset-controller: Xilinx zynqmp reset driver probed
4150[ 0.398306] ARM CCI_400_r1 PMU driver probed[ 0.405081] zynqmp-pinctrl ff180000.pinctrl: zynqmp pinctrl initialized
4151[ 0.431785] HugeTLB registered 2 MB page size, pre-allocated 0 pages
4152[ 0.504963] raid6: int64x1 gen() 447 MB/s
4153[ 0.576913] raid6: int64x1 xor() 485 MB/s
4154[ 0.648983] raid6: int64x2 gen() 741 MB/s
4155[ 0.721016] raid6: int64x2 xor() 661 MB/s
4156[ 0.793056] raid6: int64x4 gen() 1086 MB/s
4157[ 0.865074] raid6: int64x4 xor() 813 MB/s
4158[ 0.937147] raid6: int64x8 gen() 1266 MB/s
4159[ 1.009158] raid6: int64x8 xor() 824 MB/s
4160[ 1.081202] raid6: neonx1 gen() 796 MB/s
4161[ 1.153268] raid6: neonx1 xor() 837 MB/s
4162[ 1.225328] raid6: neonx2 gen() 1286 MB/s
4163[ 1.297331] raid6: neonx2 xor() 1143 MB/s
4164[ 1.369405] raid6: neonx4 gen() 1664 MB/s
4165[ 1.441419] raid6: neonx4 xor() 1306 MB/s
4166[ 1.513481] raid6: neonx8 gen() 1752 MB/s
4167[ 1.585510] raid6: neonx8 xor() 1348 MB/s
4168[ 1.589586] raid6: using algorithm neonx8 gen() 1752 MB/s
4169[ 1.594948] raid6: .... xor() 1348 MB/s, rmw enabled
4170[ 1.599879] raid6: using intx1 recovery algorithm
4171[ 1.605039] Write failed gate address:1000f02
4172[ 1.613003] SCSI subsystem initialized
4173[ 1.616784] usbcore: registered new interface driver usbfs
4174[ 1.622119] usbcore: registered new interface driver hub
4175[ 1.627395] usbcore: registered new device driver usb
4176[ 1.632438] media: Linux media interface: v0.10
4177[ 1.636891] Linux video capture interface: v2.00
4178[ 1.641478] pps_core: LinuxPPS API ver. 1 registered
4179[ 1.646382] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
4180[ 1.655475] PTP clock support registered
4181[ 1.659375] EDAC MC: Ver: 3.0.0
4182[ 1.662740] FPGA manager framework
4183[ 1.666090] fpga-region fpga-full: FPGA Region probed
4184[ 1.671091] Advanced Linux Sound Architecture Driver Initialized.
4185[ 1.677347] Bluetooth: Core ver 2.22
4186[ 1.680753] NET: Registered protocol family 31
4187[ 1.685144] Bluetooth: HCI device and connection manager initialized
4188[ 1.691463] Bluetooth: HCI socket layer initialized
4189[ 1.696304] Bluetooth: L2CAP socket layer initialized
4190[ 1.701330] Bluetooth: SCO socket layer initialized
4191[ 1.706742] clocksource: Switched to clocksource arch_sys_counter
4192[ 1.712736] VFS: Disk quotas dquot_6.6.0
4193[ 1.716580] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
4194[ 1.726831] NET: Registered protocol family 2
4195[ 1.731373] TCP established hash table entries: 16384 (order: 5, 131072 bytes)
4196[ 1.738489] TCP bind hash table entries: 16384 (order: 6, 262144 bytes)
4197[ 1.745277] TCP: Hash tables configured (established 16384 bind 16384)
4198[ 1.751673] UDP hash table entries: 1024 (order: 3, 32768 bytes)
4199[ 1.757603] UDP-Lite hash table entries: 1024 (order: 3, 32768 bytes)
4200[ 1.764110] NET: Registered protocol family 1
4201[ 1.768552] RPC: Registered named UNIX socket transport module.
4202[ 1.774277] RPC: Registered udp transport module.
4203[ 1.778944] RPC: Registered tcp transport module.
4204[ 1.783615] RPC: Registered tcp NFSv4.1 backchannel transport module.
4205[ 1.790171] Trying to unpack rootfs image as initramfs...
4206[ 2.113325] Freeing initrd memory: 8760K (ffffffc007771000 - ffffffc007fff000)
4207[ 2.120762] hw perfevents: enabled with armv8_pmuv3 PMU driver, 7 counters available
4208[ 2.128988] futex hash table entries: 1024 (order: 5, 131072 bytes)
4209[ 2.135630] workingset: timestamp_bits=62 max_order=19 bucket_order=0
4210[ 2.142548] NFS: Registering the id_resolver key type
4211[ 2.147431] Key type id_resolver registered
4212[ 2.151575] Key type id_legacy registered
4213[ 2.155546] nfs4filelayout_init: NFSv4 File Layout Driver Registering...
4214[ 2.162216] ntfs: driver 2.1.32 [Flags: R/W].
4215[ 2.166545] jffs2: version 2.2. (NAND) (SUMMARY) © 2001-2006 Red Hat, Inc.
4216[ 2.181286] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 247)
4217[ 2.188497] io scheduler noop registered
4218[ 2.192381] io scheduler deadline registered
4219[ 2.196625] io scheduler cfq registered (default)
4220[ 2.201878] nwl-pcie fd0e0000.pcie: Link is UP
4221[ 2.206170] OF: PCI: host bridge /amba/pcie@fd0e0000 ranges:
4222[ 2.211774] OF: PCI: MEM 0xe0000000..0xefffffff -> 0xe0000000
4223[ 2.217641] OF: PCI: MEM 0x600000000..0x7ffffffff -> 0x600000000
4224[ 2.223866] nwl-pcie fd0e0000.pcie: PCI host bridge to bus 0000:00
4225[ 2.229927] pci_bus 0000:00: root bus resource [bus 00-ff]
4226[ 2.235372] pci_bus 0000:00: root bus resource [mem 0xe0000000-0xefffffff]
4227[ 2.242209] pci_bus 0000:00: root bus resource [mem 0x600000000-0x7ffffffff pref]
4228[ 2.250134] pci 0000:00:00.0: BAR 8: assigned [mem 0xe0000000-0xe00fffff]
4229[ 2.256725] pci 0000:01:00.0: BAR 0: assigned [mem 0xe0000000-0xe00007ff]
4230[ 2.263472] pci 0000:00:00.0: PCI bridge to [bus 01-0c]
4231[ 2.268659] pci 0000:00:00.0: bridge window [mem 0xe0000000-0xe00fffff]
4232[ 2.276123] xilinx-dpdma fd4c0000.dma: Xilinx DPDMA engine is probed
4233[ 2.282495] xilinx-vdma 400000000.dma: Xilinx AXI VDMA Engine Driver Probed!!
4234[ 2.289546] xilinx-vdma 400010000.dma: Xilinx AXI VDMA Engine Driver Probed!!
4235[ 2.296704] xilinx-zynqmp-dma fd500000.dma: ZynqMP DMA driver Probe success
4236[ 2.303562] xilinx-zynqmp-dma fd510000.dma: ZynqMP DMA driver Probe success
4237[ 2.310480] xilinx-zynqmp-dma fd520000.dma: ZynqMP DMA driver Probe success
4238[ 2.317400] xilinx-zynqmp-dma fd530000.dma: ZynqMP DMA driver Probe success
4239[ 2.324323] xilinx-zynqmp-dma fd540000.dma: ZynqMP DMA driver Probe success
4240[ 2.331244] xilinx-zynqmp-dma fd550000.dma: ZynqMP DMA driver Probe success
4241[ 2.338158] xilinx-zynqmp-dma fd560000.dma: ZynqMP DMA driver Probe success
4242[ 2.345084] xilinx-zynqmp-dma fd570000.dma: ZynqMP DMA driver Probe success
4243[ 2.352042] xilinx-zynqmp-dma ffa80000.dma: ZynqMP DMA driver Probe success
4244[ 2.358920] xilinx-zynqmp-dma ffa90000.dma: ZynqMP DMA driver Probe success
4245[ 2.365843] xilinx-zynqmp-dma ffaa0000.dma: ZynqMP DMA driver Probe success
4246[ 2.372761] xilinx-zynqmp-dma ffab0000.dma: ZynqMP DMA driver Probe success
4247[ 2.379684] xilinx-zynqmp-dma ffac0000.dma: ZynqMP DMA driver Probe success
4248[ 2.386610] xilinx-zynqmp-dma ffad0000.dma: ZynqMP DMA driver Probe success
4249[ 2.393524] xilinx-zynqmp-dma ffae0000.dma: ZynqMP DMA driver Probe success
4250[ 2.400441] xilinx-zynqmp-dma ffaf0000.dma: ZynqMP DMA driver Probe success
4251[ 2.428643] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
4252[ 2.436122] ff000000.serial: ttyPS1 at MMIO 0xff000000 (irq = 46, base_baud = 6250000) is a xuartps
4253[ 2.445136] ff010000.serial: ttyPS0 at MMIO 0xff010000 (irq = 47, base_baud =·r¢ª¢?êconsole [ttyPS0] enabled
4254[ 2.454080] console [ttyPS0] enabled
4255[ 2.461044] bootconsole [cdns0] disabled
4256[ 2.461044] bootconsole [cdns0] disabled
4257[ 2.469098] Unable to detect cache hierarchy from DT for CPU 0
4258[ 2.479611] brd: module loaded
4259[ 2.485386] loop: module loaded
4260[ 2.489363] ahci-ceva fd0c0000.ahci: AHCI 0001.0301 32 slots 2 ports 6 Gbps 0x3 impl platform mode
4261[ 2.498244] ahci-ceva fd0c0000.ahci: flags: 64bit ncq sntf pm clo only pmp fbs pio slum part ccc sds apst
4262[ 2.508978] scsi host0: ahci-ceva
4263[ 2.512392] scsi host1: ahci-ceva
4264[ 2.515733] ata1: SATA max UDMA/133 mmio [mem 0xfd0c0000-0xfd0c1fff] port 0x100 irq 43
4265[ 2.523565] ata2: SATA max UDMA/133 mmio [mem 0xfd0c0000-0xfd0c1fff] port 0x180 irq 43
4266[ 2.531608] mtdoops: mtd device (mtddev=name/number) must be supplied
4267[ 2.538969] zynqmp-qspi ff0f0000.spi: rx bus width not found
4268[ 2.544898] m25p80 spi0.0: found n25q00, expected n25q512a
4269[ 2.550608] m25p80 spi0.0: n25q00 (131072 Kbytes)
4270[ 2.555251] 5 ofpart partitions found on MTD device spi0.0
4271[ 2.560696] Creating 5 MTD partitions on "spi0.0":
4272[ 2.565472] 0x000000000000-0x000000500000 : "boot"
4273[ 2.570731] 0x000000500000-0x000000540000 : "bootenv"
4274[ 2.576097] 0x000000540000-0x000002740000 : "kernel"
4275[ 2.581391] 0x000002740000-0x000003740000 : "user"
4276[ 2.586498] 0x000003740000-0x000003750000 : "test"
4277[ 2.592482] libphy: Fixed MDIO Bus: probed
4278[ 2.597593] tun: Universal TUN/TAP device driver, 1.6
4279[ 2.602563] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
4280[ 2.608835] CAN device driver interface
4281[ 2.613150] macb ff0c0000.ethernet: Not enabling partial store and forward
4282[ 2.620456] libphy: MACB_mii_bus: probed
4283[ 2.699017] macb ff0c0000.ethernet eth0: Cadence GEM rev 0x50070106 at 0xff0c0000 irq 30 (00:0a:35:00:22:01)
4284[ 2.708767] Marvell 88E1510 ff0c0000.etherne:00: attached PHY driver [Marvell 88E1510] (mii_bus:phy_addr=ff0c0000.etherne:00, irq=-1)
4285[ 2.721357] usbcore: registered new interface driver asix
4286[ 2.726721] usbcore: registered new interface driver ax88179_178a
4287[ 2.732768] usbcore: registered new interface driver cdc_ether
4288[ 2.738585] usbcore: registered new interface driver net1080
4289[ 2.744224] usbcore: registered new interface driver cdc_subset
4290[ 2.750127] usbcore: registered new interface driver zaurus
4291[ 2.755693] usbcore: registered new interface driver cdc_ncm
4292[ 2.761652] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
4293[ 2.768098] ehci-pci: EHCI PCI platform driver
4294[ 2.772750] usbcore: registered new interface driver uas
4295[ 2.778011] usbcore: registered new interface driver usb-storage
4296[ 2.784264] mousedev: PS/2 mouse device common for all mice
4297[ 2.790165] rtc_zynqmp ffa60000.rtc: rtc core: registered ffa60000.rtc as rtc0
4298[ 2.797327] i2c /dev entries driver
4299[ 2.800957] cdns-i2c ff020000.i2c: 400 kHz mmio ff020000 irq 32
4300[ 2.807007] cdns-i2c ff030000.i2c: 400 kHz mmio ff030000 irq 33
4301[ 2.813770] usbcore: registered new interface driver uvcvideo
4302[ 2.819433] USB Video Class driver (1.1.1)
4303[ 2.823872] Bluetooth: HCI UART driver ver 2.3
4304[ 2.828237] Bluetooth: HCI UART protocol H4 registered
4305[ 2.833353] Bluetooth: HCI UART protocol BCSP registered
4306[ 2.838648] Bluetooth: HCI UART protocol LL registered
4307[ 2.843768] Bluetooth: HCI UART protocol ATH3K registered
4308[ 2.844935] ata2: SATA link down (SStatus 0 SControl 330)
4309[ 2.854531] Bluetooth: HCI UART protocol Three-wire (H5) registered
4310[ 2.860819] Bluetooth: HCI UART protocol Intel registered
4311[ 2.866197] Bluetooth: HCI UART protocol Broadcom registered
4312[ 2.871805] Bluetooth: HCI UART protocol QCA registered
4313[ 2.877045] usbcore: registered new interface driver bcm203x
4314[ 2.882685] usbcore: registered new interface driver bpa10x
4315[ 2.888245] usbcore: registered new interface driver bfusb
4316[ 2.893710] usbcore: registered new interface driver btusb
4317[ 2.899148] Bluetooth: Generic Bluetooth SDIO driver ver 0.1
4318[ 2.904839] usbcore: registered new interface driver ath3k
4319[ 2.910380] EDAC MC: ECC not enabled
4320[ 2.914003] EDAC DEVICE0: Giving out device to module edac controller cache_err: DEV edac (POLLED)
4321[ 2.923033] EDAC DEVICE1: Giving out device to module zynqmp-ocm-edac controller zynqmp_ocm: DEV ff960000.memory-controller (INTERRUPT)
4322[ 2.935324] sdhci: Secure Digital Host Controller Interface driver
4323[ 2.941419] sdhci: Copyright(c) Pierre Ossman
4324[ 2.945758] sdhci-pltfm: SDHCI platform and OF driver helper
4325[ 2.998755] mmc0: SDHCI controller on ff160000.sdhci [ff160000.sdhci] using ADMA 64-bit
4326[ 3.002753] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 330)
4327[ 3.002951] ata1.00: ATA-8: InnoDisk SATA Slim D150Q, 120925, max UDMA/133
4328[ 3.002954] ata1.00: 15649200 sectors, multi 16: LBA NCQ (depth 31/32)
4329[ 3.003174] ata1.00: configured for UDMA/133
4330[ 3.003479] scsi 0:0:0:0: Direct-Access ATA InnoDisk SATA Sl 25 PQ: 0 ANSI: 5
4331[ 3.038728] ledtrig-cpu: registered to indicate activity on CPUs
4332[ 3.044803] usbcore: registered new interface driver usbhid
4333[ 3.050292] usbhid: USB HID core driver
4334[ 3.055739] fpga_manager fpga0: Xilinx ZynqMP FPGA Manager registered
4335[ 3.062609] xilinx-dp-snd-pcm dp_snd_pcm0: Xilinx DisplayPort Sound PCM probed
4336[ 3.069774] xilinx-dp-snd-pcm dp_snd_pcm1: Xilinx DisplayPort Sound PCM probed
4337[ 3.077127] PLL: shutdown
4338[ 3.080565] Write failed to divider address:fd1a007c
4339[ 3.085604] PLL: enable
4340[ 3.088128] xilinx-dp-snd-codec dp_snd_codec0: Xilinx DisplayPort Sound Codec probed
4341[ 3.096211] xilinx-dp-snd-card dp_snd_card: xilinx-dp-snd-codec-dai <-> xilinx-dp-snd-codec-dai mapping ok
4342[ 3.107923] xilinx-dp-snd-card dp_snd_card: xilinx-dp-snd-codec-dai <-> xilinx-dp-snd-codec-dai mapping ok
4343[ 3.117768] xilinx-dp-snd-card dp_snd_card: Xilinx DisplayPort Sound Card probed
4344[ 3.119091] sd 0:0:0:0: [sda] 15649200 512-byte logical blocks: (8.01 GB/7.46 GiB)
4345[ 3.119198] sd 0:0:0:0: [sda] Write Protect is off
4346[ 3.119245] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
4347[ 3.120077] sda: sda1
4348[ 3.120591] sd 0:0:0:0: [sda] Attached SCSI disk
4349[ 3.153519] pktgen: Packet Generator for packet performance testing. Version: 2.75
4350[ 3.162194] Netfilter messages via NETLINK v0.30.
4351[ 3.166941] ip_tables: (C) 2000-2006 Netfilter Core Team
4352[ 3.172221] Initializing XFRM netlink socket
4353[ 3.176491] NET: Registered protocol family 10
4354[ 3.182943] ip6_tables: (C) 2000-2006 Netfilter Core Team
4355[ 3.188296] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver
4356[ 3.194500] NET: Registered protocol family 17
4357[ 3.198874] NET: Registered protocol family 15
4358[ 3.203297] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this.
4359[ 3.216220] Ebtables v2.0 registered
4360[ 3.219815] can: controller area network core (rev 20120528 abi 9)
4361[ 3.225975] NET: Registered protocol family 29
4362[ 3.230369] can: raw protocol (rev 20120528)
4363[ 3.234628] can: broadcast manager protocol (rev 20161123 t)
4364[ 3.240266] can: netlink gateway (rev 20130117) max_hops=1
4365[ 3.245789] Bluetooth: RFCOMM TTY layer initialized
4366[ 3.250599] Bluetooth: RFCOMM socket layer initialized
4367[ 3.255725] Bluetooth: RFCOMM ver 1.11
4368[ 3.259461] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
4369[ 3.264741] Bluetooth: BNEP filters: protocol multicast
4370[ 3.269952] Bluetooth: BNEP socket layer initialized
4371[ 3.274897] Bluetooth: HIDP (Human Interface Emulation) ver 1.2
4372[ 3.280801] Bluetooth: HIDP socket layer initialized
4373[ 3.285946] 9pnet: Installing 9P2000 support
4374[ 3.290147] Key type dns_resolver registered
4375[ 3.294792] registered taskstats version 1
4376[ 3.299176] Btrfs loaded, crc32c=crc32c-generic
4377[ 3.310882] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller
4378[ 3.316310] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 1
4379[ 3.324192] xhci-hcd xhci-hcd.0.auto: hcc params 0x0238f625 hci version 0x100 quirks 0x02010010
4380[ 3.332841] xhci-hcd xhci-hcd.0.auto: irq 229, io mem 0xfe300000
4381[ 3.338914] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
4382[ 3.345617] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
4383[ 3.352819] usb usb1: Product: xHCI Host Controller
4384[ 3.357678] usb usb1: Manufacturer: Linux 4.9.0 xhci-hcd
4385[ 3.362972] usb usb1: SerialNumber: xhci-hcd.0.auto
4386[ 3.368966] hub 1-0:1.0: USB hub found
4387[ 3.372653] hub 1-0:1.0: 1 port detected
4388[ 3.376652] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller
4389[ 3.382056] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 2
4390[ 3.389722] usb usb2: We don't know the algorithms for LPM for this host, disabling LPM.
4391[ 3.397824] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003
4392[ 3.404533] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
4393[ 3.411736] usb usb2: Product: xHCI Host Controller
4394[ 3.416596] usb usb2: Manufacturer: Linux 4.9.0 xhci-hcd
4395[ 3.421891] usb usb2: SerialNumber: xhci-hcd.0.auto
4396[ 3.426959] hub 2-0:1.0: USB hub found
4397[ 3.430633] hub 2-0:1.0: 1 port detected
4398[ 3.434915] rtc_zynqmp ffa60000.rtc: setting system clock to 1970-01-01 00:00:15 UTC (15)
4399[ 3.443112] clk: Not disabling unused clocks
4400[ 3.447301] ALSA device list:
4401[ 3.450244] #0: DisplayPort monitor
4402[ 3.454517] Freeing unused kernel memory: 448K (ffffffc000b70000 - ffffffc000be0000)
4403INIT: version 2.88 booting
4404Starting udev
4405[ 3.570034] udevd[1623]: starting version 3.2
4406[ 3.574719] random: udevd: uninitialized urandom read (16 bytes read)
4407[ 3.581163] random: udevd: uninitialized urandom read (16 bytes read)
4408[ 3.587581] random: udevd: uninitialized urandom read (16 bytes read)
4409[ 3.593971] random: udevd: uninitialized urandom read (16 bytes read)
4410[ 3.604024] udevd[1624]: starting eudev-3.2
4411[ 3.647007] random: udevd: uninitialized urandom read (16 bytes read)
4412[ 3.656446] random: udevd: uninitialized urandom read (16 bytes read)
4413[ 3.665512] 4fm: loading out-of-tree module taints kernel.
4414[ 3.672391] pci 0000:00:00.0: enabling device (0000 -> 0002)
4415[ 3.678069] 4FM 0000:01:00.0: enabling device (0000 -> 0002)
4416[ 3.683677] Accessing 47232 of total 1 entries in dev->bar
4417[ 3.689174] dev->bar[u].virt_address:cfae07c value:38011121
4418[ 3.694722] dev->bar[u].virt_address:cfae080 value:deadbeef
4419[ 3.700240] dev->bar[u].virt_address:cfae084 value:baadf00d
4420[ 3.705834] dev->bar[u].virt_address:cfae088 value:eba00eba
4421[ 3.711339] dev->bar[u].virt_address:cfae08c value:beefdeaf
4422[ 3.720486] /media/yocto4/vp880/VP88x_2017_3_PRJ0191/build/tmp/work/plnx_aarch64-xilinx-linux/4fm/1.0-r0/4fm.c: found 1 devices
4423[ 3.733882] <dma1> init: registered
4424[ 3.743460] <dma2> init: registered
4425[ 4.001067] FAT-fs (sda1): Volume was not properly unmounted. Some data may be corrupt. Please run fsck.
4426Populating dev cache
4427[ 4.259164] random: dd: uninitialized urandom read (512 bytes read)
4428Thu Jul 26 08:51:43 UTC 2018
4429Starting internet superserver: inetd.
4430Running postinst /etc/rpm-postinsts/100-sysvinit-inittab...
4431update-rc.d: /etc/init.d/run-postinsts exists during rc.d purge (continuing)
4432INIT: Entering runlevel: 5
4433Hello World
4434[22]:0x12
4435[20]:0x201
4436[20]:0x201
4437[22]:0x1
4438[0]:0x140
4439[0]:0x140
4440Configuring network interfaces... [ 4.557995] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
4441done.
4442Starting Dropbear SSH server: [ 4.586649] random: dropbearkey: uninitialized urandom read (32 bytes read)
4443[ 4.597252] random: dropbearkey: uninitialized urandom read (32 bytes read)
4444
4445[ 5.586858] macb ff0c0000.ethernet eth0: link up (1000/Full)
4446[ 5.592459] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
4447[ 6.442661] random: dropbearkey: uninitialized urandom read (32 bytes read)
4448Public key portion is:
4449ssh-rsa AAAAB3NzaC1yc2EAAAADAQABAAABAQCEiVe9ICxky0cFOqZZxLxMs7k5Hclka9GAmCcXyBQPifKoKpA1rb9ZCSwatHm+pWPA3OqU13hsSWXZ41I/zfPPantNHyNSqpIFfd3KRy952JMx9+D24a2C72hsdgmDiBb4eomIrKCxQUefLrLVyCvWB7kmTuWQP41luHOnOmsk1ssvDIikW+6Ux0WOIRg1gXLEWj1YyENQEJUaQAW13wbgtzIbHF6bjHSZX/wKPdKV2eL1I3hfZFZa91M9jYno1Y4dvWVEU3KDr3ALx3unmQmvV80R4KP/b0v8uMIJcxjIcl/X8JZzgOVLfECOJYFIg+vLMGPFbSsWjQDruIxExP9j root@VP88x_2017_3_PRJ0191
4450Fingerprint: md5 4c:a2:df:83:6c:59:c2:de:ad:88:25:b9:35:0b[ 6.495512] random: fast init done
4451:c5:95
4452dropbear.
4453Starting syslogd/klogd: done
4454[ 6.945424] random: crng init done
4455[ 8.733735] jffs2: notice: (2115) jffs2_build_xattr_subsystem: complete building xattr subsystem, 0 of xdatum (0 unchecked, 0 orphan) and 0 of xref (0 dead, 0 orphan) found.
4456hello world.....
4457Starting tcf-agent: OK
4458
4459root@VP88x_2017_3_PRJ0191:~# cd /mnt/
4460root@VP88x_2017_3_PRJ0191:/mnt# ./diagnostic.elf
4461enter number of cyclic (0 - for infinite)
44621
4463SPI1 result = 0 SUCCESS
4464Opened device VP880. PCIe read from CID 0x2000: 2f70013
4465PCIe result = 0 SUCCESS
4466
4467--- AMS zynq PS System monitor---
4468temperature ps 57.61C
4469vcc_psintlp 0.87V
4470vcc_psintfp 0.87V
4471vcc_psaux 1.81V
4472vcc_psddr_504 1.21V
4473vcc_psio3_503 3.24V
4474vcc_psio0_500 3.24V
4475vcc_psio1_501 1.80V
4476vcc_psio2_502 1.80V
4477vcc_psmgtravcc 0.87V
4478vcc_psmgtravtt 1.80V
4479---------------------------------
4480
4481--- AMS zynq PL System monitor---
4482temperature pl 53.73C
4483vcc_int 0.87V
4484vcc_aux 1.81V
4485vcc_bram 0.87V
4486vcc_psintlp 0.87V
4487vcc_psintfp 0.87V
4488vcc_psaux 1.81V
4489vcc_vuser1 0.00V
4490vcc_vuser2 0.00V
4491vcc_vuser3 0.00V
4492vcc_vuser4 0.00V
4493---------------------------------
4494ranran.............temperature 29 C
4495vmon_fmc_vadj 1.79V
4496vmon_fmc_viob 1.79V
4497vmon_sblast_vcore 1.64V
4498vmon_sblast_vio 1.48V
4499vmon_2v5_mgt_refclk 2.44V
4500vmon_3v3_mgt_refclk 3.22V
4501vmon_1v2 1.18V
4502vmon_1v4 1.40V
4503vmon_vaux 3.31V
4504VPX_SYS_RST_N :1
4505PS_ERROR_STATUS :1
4506PS_ERROR_OUT :1
4507PS_INIT_B :1
4508PS_DONE :1
4509INIT_B :1
4510DONE :1
4511FLASH_A26 :1
4512HSC_12V_PG :1
4513HSC_5V_PG :1
4514VPX_GAP :1
4515VPX_GA4 :1
4516VPX_GA3 :1
4517VPX_GA2 :1
4518VPX_GA1 :1
4519VPX_GA0 :1
4520PG_LED_N :1
4521ZYNQ_CONFDONE_LED :1
4522FPGA_CONFDONE_LED :1
4523FMC_VADJ_VS0 :1
4524FMC_VADJ_VS1 :1
4525FMC_VADJ_VS2 :1
4526VADJ_FMC_EN_L :1
4527FMC_BYPASS :1
4528HSC_ON :1
4529HSC_3V3_PG :1
4530PG_C2M_3V3 :1
4531MGT_PG :1
4532DDR4_VTT_PG :1
4533DDR4_PG :1
4534PG_FPGA_CORE :1
45351V8_LOC_2V5_VPP_PG :1
4536HSC Source channel 1 3.250V
4537HSC Source channel 2 5.031V
4538HSC ADIN channel 1 0.423V
4539HSC ADIN channel 2 0.423V
4540HSC Sense channel 1 14.625mV
4541HSC Current channel 1 2.925A
4542HSC Sense channel 2 2.625mV
4543HSC Current channel 2 0.875A
4544HSC Power channel 1 9.506W
4545HSC Power channel 2 4.402W
4546---------------------------------------------------
4547HSC Source channel 1 2.500V
4548HSC Source channel 2 11.906V
4549HSC ADIN channel 1 0.423V
4550HSC ADIN channel 2 0.424V
4551HSC Sense channel 1 0.000mV
4552HSC Current channel 1 0.000A
4553HSC Sense channel 2 4.562mV
4554HSC Current channel 2 0.913A
4555HSC Power channel 1 0.000W
4556HSC Power channel 2 10.864W
4557---------------------------------------------------
4558HOSTIF version 1.0.0.5
4559read fpga values
4560temp_pl 50.812714
4561vcc_int 0.958008
4562vcc_aux 1.801758
4563vcc_bram 0.958008
4564vcc_vuser0 1.502930
4565vcc_vuser1 1.186523
4566vcc_vuser2 0.000000
4567vcc_vuser3 0.000000
4568MMC result =SUCCESS
4569PING 192.168.1.20 (192.168.1.20): 56 data bytes
457064 bytes from 192.168.1.20: seq=0 ttl=128 time=0.618 ms
4571
4572--- 192.168.1.20 ping statistics ---
45731 packets transmitted, 1 packets received, 0% packet loss
4574round-trip min/avg/max = 0.618/0.618/0.618 ms
4575Ethernet result = 0 SUCCESS
4576UnitAPI version : 1.3.8 : Enumerating units in the system, please wait...
4577
4578Global Units:
4579Global Unit 0 is on Device 'VP880' (P0): Internal Unit 0 is star 0x01C4 (axi_vp880_8l_host_if) with index 1 of star type 0x000D (Host Interface)
4580Global Unit 1 is on Device 'VP880' (P0): Internal Unit 1 is star 0x0203 (Unknown) with index 0 of star type 0x0005 (ADC)
4581Global Unit 2 is on Device 'VP880' (P0): Internal Unit 2 is star 0x015C (axi_intrc16) with index 0 of star type 0x0014 (Interrupt Controller)
4582Global Unit 3 is on Device 'VP880' (P0): Internal Unit 3 is star 0x014C (axi_i2c_master) with index 0 of star type 0x000E (3rd Party Logic)
4583Global Unit 4 is on Device 'VP880' (P0): Internal Unit 4 is star 0x0202 (Unknown) with index 0 of star type 0x0003 (Memory FIFO)
4584Global Unit 5 is on Device 'VP880' (P0): Internal Unit 5 is star 0x01C5 (axi_vp880_ddr4_fifo) with index 0 of star type 0x0003 (Memory FIFO)
4585
4586
4587Running 'VP880-FMC134' on PCIe, CID725
4588
4589-----------------------------------------------------------
4590Device 'VP880' (P0)
4591-----------------------------------------------------------
4592Constellation ID : 759
4593Number Of Stars : 19
4594Software Build Code: 1524177589 (Thu Apr 19 22:39:49 2018)
4595Firmware Build Code: 0
4596Firmware Revision : 1.2
4597-----------------------------------------------------------
4598
4599FMC detected
4600FMC result = 0 SUCCESS
4601memory test: OK
4602Memory result = 0 SUCCESS
4603DISK: OK
4604DISK result = 0 SUCCESS
4605FLASH: OK
4606FLASH result = 0 SUCCESS
4607read returned 9
4608RFFE result = 0 SUCCESS
4609root@VP88x_2017_3_PRJ0191:/mnt# Xilinx Zynq MP First Stage Boot Loader
4610Release 2017.3 May 24 2018 - 10:35:53
4611Marvell PHY reset
4612SI5338 0x70 not configured
4613SI5338 0x70 configuration finished
4614SI5338 0x71 not configured
4615SI5338 0x71 configuration finished
4616
4617
4618U-Boot 2017.01 (Jul 26 2018 - 02:50:11 -0600) Xilinx ZynqMP ZCU102 revB
4619
4620I2C: ready
4621DRAM: 2 GiB
4622EL Level: EL2
4623Chip ID: xczu3eg
4624MMC: Card did not respond to voltage select!
4625sdhci@ff160000 - probe failed: -95
4626Card did not respond to voltage select!
4627
4628zynqmp_qspi_ofdata_to_platdata: CLK 300000000
4629SF: Detected n25q1024 with page size 256 Bytes, erase size 64 KiB, total 128 MiB
4630*** Warning - bad CRC, using default environment
4631
4632In: serial
4633Out: serial
4634Err: serial
4635Bootmode: QSPI_MODE
4636Net: ZYNQ GEM: ff0c0000, phyaddr c, interface rgmii-id
4637eth0: ethernet@ff0c0000
4638U-BOOT for VP88x_2017_3_PRJ0191
4639
4640Hit any key to stop autoboot: 0
4641SF: Detected n25q1024 with page size 256 Bytes, erase size 64 KiB, total 128 MiB
4642device 0 offset 0x540000, size 0x2200000
4643SF: 35651584 bytes @ 0x540000 Read: OK
4644## Loading kernel from FIT Image at 10000000 ...
4645 Using 'conf@1' configuration
4646 Trying 'kernel@0' kernel subimage
4647 Description: Linux Kernel
4648 Type: Kernel Image
4649 Compression: uncompressed
4650 Data Start: 0x100000d8
4651 Data Size: 12503552 Bytes = 11.9 MiB
4652 Architecture: AArch64
4653 OS: Linux
4654 Load Address: 0x00080000
4655 Entry Point: 0x00080000
4656 Hash algo: sha1
4657 Hash value: 6738559f9c7602fa2a0ff36fdfc8cf5b9b3e6565
4658 Verifying Hash Integrity ... sha1+ OK
4659## Loading ramdisk from FIT Image at 10000000 ...
4660 Using 'conf@1' configuration
4661 Trying 'ramdisk@0' ramdisk subimage
4662 Description: ramdisk
4663 Type: RAMDisk Image
4664 Compression: uncompressed
4665 Data Start: 0x10bf54e4
4666 Data Size: 8973721 Bytes = 8.6 MiB
4667 Architecture: AArch64
4668 OS: Linux
4669 Load Address: unavailable
4670 Entry Point: unavailable
4671 Hash algo: sha1
4672 Hash value: 4b595c4e0c42ac8967d3d732b389c6521f0b492f
4673 Verifying Hash Integrity ... sha1+ OK
4674## Loading fdt from FIT Image at 10000000 ...
4675 Using 'conf@1' configuration
4676 Trying 'fdt@0' fdt subimage
4677 Description: Flattened Device Tree blob
4678 Type: Flat Device Tree
4679 Compression: uncompressed
4680 Data Start: 0x10becbd0
4681 Data Size: 34910 Bytes = 34.1 KiB
4682 Architecture: AArch64
4683 Hash algo: sha1
4684 Hash value: 20fc450d3d82f1967aba254f93c3704b6f5d1f6e
4685 Verifying Hash Integrity ... sha1+ OK
4686 Booting using the fdt blob at 0x10becbd0
4687 Loading Kernel Image ... OK
4688 Loading Ramdisk to 07771000, end 07fffd99 ... OK
4689 Loading Device Tree to 0000000007765000, end 000000000777085d ... OK
4690
4691Starting kernel ...
4692
4693[ 0.000000] Booting Linux on physical CPU 0x0
4694[ 0.000000] Linux version 4.9.0 (user@user-VirtualBox) (gcc version 6.2.1 20161016 (Linaro GCC 6.2-2016.11) ) #1 SMP Thu Jul 26 01:50:46 MDT 2018
4695[ 0.000000] Boot CPU: AArch64 Processor [410fd034]
4696[ 0.000000] earlycon: cdns0 at MMIO 0x00000000ff010000 (options '115200n8')
4697[ 0.000000] bootconsole [cdns0] enabled
4698[ 0.000000] efi: Getting EFI parameters from FDT:
4699[ 0.000000] efi: UEFI not found.
4700[ 0.000000] cma: Reserved 512 MiB at 0x0000000060000000
4701[ 0.000000] psci: probing for conduit method from DT.
4702[ 0.000000] psci: PSCIv1.0 detected in firmware.
4703[ 0.000000] psci: Using standard PSCI v0.2 function IDs
4704[ 0.000000] psci: MIGRATE_INFO_TYPE not supported.
4705[ 0.000000] percpu: Embedded 21 pages/cpu @ffffffc05ff76000 s46232 r8192 d31592 u86016
4706[ 0.000000] Detected VIPT I-cache on CPU0
4707[ 0.000000] CPU features: enabling workaround for ARM erratum 845719
4708[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 517120
4709[ 0.000000] Kernel command line: console=ttyPS0,115200 earlyprintk earlycon=cdns,mmio,0xFF010000,115200n8 uio_pdrv_genirq.of_id=generic-uio clk_ignore_unused cma=512M coherent_pool=64MiB
4710[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
4711[ 0.000000] Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes)
4712[ 0.000000] Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes)
4713[ 0.000000] Memory: 1519128K/2097152K available (8508K kernel code, 562K rwdata, 2636K rodata, 448K init, 382K bss, 53736K reserved, 524288K cma-reserved)
4714[ 0.000000] Virtual kernel memory layout:
4715[ 0.000000] modules : 0xffffff8000000000 - 0xffffff8008000000 ( 128 MB)
4716[ 0.000000] vmalloc : 0xffffff8008000000 - 0xffffffbebfff0000 ( 250 GB)
4717[ 0.000000] .text : 0xffffff8008080000 - 0xffffff80088d0000 ( 8512 KB)
4718[ 0.000000] .rodata : 0xffffff80088d0000 - 0xffffff8008b70000 ( 2688 KB)
4719[ 0.000000] .init : 0xffffff8008b70000 - 0xffffff8008be0000 ( 448 KB)
4720[ 0.000000] .data : 0xffffff8008be0000 - 0xffffff8008c6ca00 ( 563 KB)
4721[ 0.000000] .bss : 0xffffff8008c6ca00 - 0xffffff8008ccc434 ( 383 KB)
4722[ 0.000000] fixed : 0xffffffbefe7fd000 - 0xffffffbefec00000 ( 4108 KB)
4723[ 0.000000] PCI I/O : 0xffffffbefee00000 - 0xffffffbeffe00000 ( 16 MB)
4724[ 0.000000] vmemmap : 0xffffffbf00000000 - 0xffffffc000000000 ( 4 GB maximum)
4725[ 0.000000] 0xffffffbf00000000 - 0xffffffbf01c00000 ( 28 MB actual)
4726[ 0.000000] memory : 0xffffffc000000000 - 0xffffffc080000000 ( 2048 MB)
4727[ 0.000000] Hierarchical RCU implementation.
4728[ 0.000000] Build-time adjustment of leaf fanout to 64.
4729[ 0.000000] RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=4.
4730[ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=64, nr_cpu_ids=4
4731[ 0.000000] NR_IRQS:64 nr_irqs:64 0
4732[ 0.000000] GIC: Adjusting CPU interface base to 0x00000000f902f000
4733[ 0.000000] GIC: Using split EOI/Deactivate mode
4734[ 0.000000] arm_arch_timer: Architected cp15 timer(s) running at 50.00MHz (phys).
4735[ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0xb8812736b, max_idle_ns: 440795202655 ns
4736[ 0.000003] sched_clock: 56 bits at 50MHz, resolution 20ns, wraps every 4398046511100ns
4737[ 0.008254] Console: colour dummy device 80x25
4738[ 0.012527] Calibrating delay loop (skipped), value calculated using timer frequency.. 100.00 BogoMIPS (lpj=200000)
4739[ 0.022886] pid_max: default: 32768 minimum: 301
4740[ 0.027578] Mount-cache hash table entries: 4096 (order: 3, 32768 bytes)
4741[ 0.034137] Mountpoint-cache hash table entries: 4096 (order: 3, 32768 bytes)
4742[ 0.041866] ASID allocator initialised with 65536 entries
4743[ 0.047561] zynqmp_plat_init Power management API v0.3
4744[ 0.052578] EFI services will not be available.
4745[ 0.057341] Detected VIPT I-cache on CPU1
4746[ 0.057375] CPU1: Booted secondary processor [410fd034]
4747[ 0.057636] Detected VIPT I-cache on CPU2
4748[ 0.057653] CPU2: Booted secondary processor [410fd034]
4749[ 0.057902] Detected VIPT I-cache on CPU3
4750[ 0.057918] CPU3: Booted secondary processor [410fd034]
4751[ 0.057950] Brought up 4 CPUs
4752[ 0.088237] SMP: Total of 4 processors activated.
4753[ 0.092913] CPU features: detected feature: 32-bit EL0 Support
4754[ 0.098709] CPU: All CPU(s) started at EL2
4755[ 0.102782] alternatives: patching kernel code
4756[ 0.108038] devtmpfs: initialized
4757[ 0.115570] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
4758[ 0.136572] xor: measuring software checksum speed
4759[ 0.181245] 8regs : 2542.000 MB/sec
4760[ 0.221270] 8regs_prefetch: 2266.000 MB/sec
4761[ 0.265638] 32regs : 3125.000 MB/sec
4762[ 0.305666] 32regs_prefetch: 2627.000 MB/sec
4763[ 0.310087] xor: using function: 32regs (3125.000 MB/sec)
4764[ 0.315541] pinctrl core: initialized pinctrl subsystem
4765[ 0.321222] NET: Registered protocol family 16
4766[ 0.326302] Failed to initialise IOMMU /amba/smmu@fd800000
4767[ 0.331809] vdso: 2 pages (1 code @ ffffff80088d7000, 1 data @ ffffff8008be4000)
4768[ 0.339015] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers.
4769[ 0.374251] DMA: preallocated 65536 KiB pool for atomic allocations
4770[ 0.390649] reset_zynqmp reset-controller: Xilinx zynqmp reset driver probed
4771[ 0.398133] ARM CCI_400_r1 PMU driver probed[ 0.404898] zynqmp-pinctrl ff180000.pinctrl: zynqmp pinctrl initialized
4772[ 0.431602] HugeTLB registered 2 MB page size, pre-allocated 0 pages
4773[ 0.504911] raid6: int64x1 gen() 447 MB/s
4774[ 0.576907] raid6: int64x1 xor() 486 MB/s
4775[ 0.648955] raid6: int64x2 gen() 741 MB/s
4776[ 0.720995] raid6: int64x2 xor() 661 MB/s
4777[ 0.793033] raid6: int64x4 gen() 1086 MB/s
4778[ 0.865087] raid6: int64x4 xor() 816 MB/s
4779[ 0.937141] raid6: int64x8 gen() 1266 MB/s
4780[ 1.009165] raid6: int64x8 xor() 824 MB/s
4781[ 1.081195] raid6: neonx1 gen() 796 MB/s
4782[ 1.153227] raid6: neonx1 xor() 837 MB/s
4783[ 1.225309] raid6: neonx2 gen() 1286 MB/s
4784[ 1.297327] raid6: neonx2 xor() 1143 MB/s
4785[ 1.369357] raid6: neonx4 gen() 1664 MB/s
4786[ 1.441396] raid6: neonx4 xor() 1306 MB/s
4787[ 1.513456] raid6: neonx8 gen() 1752 MB/s
4788[ 1.585490] raid6: neonx8 xor() 1348 MB/s
4789[ 1.589569] raid6: using algorithm neonx8 gen() 1752 MB/s
4790[ 1.594931] raid6: .... xor() 1348 MB/s, rmw enabled
4791[ 1.599861] raid6: using intx1 recovery algorithm
4792[ 1.605023] Write failed gate address:1000f02
4793[ 1.612843] SCSI subsystem initialized
4794[ 1.616630] usbcore: registered new interface driver usbfs
4795[ 1.621952] usbcore: registered new interface driver hub
4796[ 1.627239] usbcore: registered new device driver usb
4797[ 1.632289] media: Linux media interface: v0.10
4798[ 1.636734] Linux video capture interface: v2.00
4799[ 1.641320] pps_core: LinuxPPS API ver. 1 registered
4800[ 1.646226] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
4801[ 1.655320] PTP clock support registered
4802[ 1.659221] EDAC MC: Ver: 3.0.0
4803[ 1.662567] FPGA manager framework
4804[ 1.665913] fpga-region fpga-full: FPGA Region probed
4805[ 1.670915] Advanced Linux Sound Architecture Driver Initialized.
4806[ 1.677170] Bluetooth: Core ver 2.22
4807[ 1.680575] NET: Registered protocol family 31
4808[ 1.684971] Bluetooth: HCI device and connection manager initialized
4809[ 1.691289] Bluetooth: HCI socket layer initialized
4810[ 1.696131] Bluetooth: L2CAP socket layer initialized
4811[ 1.701165] Bluetooth: SCO socket layer initialized
4812[ 1.706553] clocksource: Switched to clocksource arch_sys_counter
4813[ 1.712548] VFS: Disk quotas dquot_6.6.0
4814[ 1.716386] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
4815[ 1.726629] NET: Registered protocol family 2
4816[ 1.731173] TCP established hash table entries: 16384 (order: 5, 131072 bytes)
4817[ 1.738289] TCP bind hash table entries: 16384 (order: 6, 262144 bytes)
4818[ 1.745074] TCP: Hash tables configured (established 16384 bind 16384)
4819[ 1.751467] UDP hash table entries: 1024 (order: 3, 32768 bytes)
4820[ 1.757404] UDP-Lite hash table entries: 1024 (order: 3, 32768 bytes)
4821[ 1.763919] NET: Registered protocol family 1
4822[ 1.768354] RPC: Registered named UNIX socket transport module.
4823[ 1.774077] RPC: Registered udp transport module.
4824[ 1.778745] RPC: Registered tcp transport module.
4825[ 1.783416] RPC: Registered tcp NFSv4.1 backchannel transport module.
4826[ 1.789966] Trying to unpack rootfs image as initramfs...
4827[ 2.113067] Freeing initrd memory: 8760K (ffffffc007771000 - ffffffc007fff000)
4828[ 2.120497] hw perfevents: enabled with armv8_pmuv3 PMU driver, 7 counters available
4829[ 2.128813] futex hash table entries: 1024 (order: 5, 131072 bytes)
4830[ 2.135455] workingset: timestamp_bits=62 max_order=19 bucket_order=0
4831[ 2.142401] NFS: Registering the id_resolver key type
4832[ 2.147282] Key type id_resolver registered
4833[ 2.151413] Key type id_legacy registered
4834[ 2.155398] nfs4filelayout_init: NFSv4 File Layout Driver Registering...
4835[ 2.162068] ntfs: driver 2.1.32 [Flags: R/W].
4836[ 2.166396] jffs2: version 2.2. (NAND) (SUMMARY) © 2001-2006 Red Hat, Inc.
4837[ 2.181215] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 247)
4838[ 2.188427] io scheduler noop registered
4839[ 2.192319] io scheduler deadline registered
4840[ 2.196556] io scheduler cfq registered (default)
4841[ 2.201813] nwl-pcie fd0e0000.pcie: Link is UP
4842[ 2.206102] OF: PCI: host bridge /amba/pcie@fd0e0000 ranges:
4843[ 2.211704] OF: PCI: MEM 0xe0000000..0xefffffff -> 0xe0000000
4844[ 2.217572] OF: PCI: MEM 0x600000000..0x7ffffffff -> 0x600000000
4845[ 2.223796] nwl-pcie fd0e0000.pcie: PCI host bridge to bus 0000:00
4846[ 2.229857] pci_bus 0000:00: root bus resource [bus 00-ff]
4847[ 2.235304] pci_bus 0000:00: root bus resource [mem 0xe0000000-0xefffffff]
4848[ 2.242135] pci_bus 0000:00: root bus resource [mem 0x600000000-0x7ffffffff pref]
4849[ 2.250066] pci 0000:00:00.0: BAR 8: assigned [mem 0xe0000000-0xe00fffff]
4850[ 2.256664] pci 0000:01:00.0: BAR 0: assigned [mem 0xe0000000-0xe00007ff]
4851[ 2.263411] pci 0000:00:00.0: PCI bridge to [bus 01-0c]
4852[ 2.268598] pci 0000:00:00.0: bridge window [mem 0xe0000000-0xe00fffff]
4853[ 2.276065] xilinx-dpdma fd4c0000.dma: Xilinx DPDMA engine is probed
4854[ 2.282440] xilinx-vdma 400000000.dma: Xilinx AXI VDMA Engine Driver Probed!!
4855[ 2.289488] xilinx-vdma 400010000.dma: Xilinx AXI VDMA Engine Driver Probed!!
4856[ 2.296646] xilinx-zynqmp-dma fd500000.dma: ZynqMP DMA driver Probe success
4857[ 2.303509] xilinx-zynqmp-dma fd510000.dma: ZynqMP DMA driver Probe success
4858[ 2.310428] xilinx-zynqmp-dma fd520000.dma: ZynqMP DMA driver Probe success
4859[ 2.317358] xilinx-zynqmp-dma fd530000.dma: ZynqMP DMA driver Probe success
4860[ 2.324270] xilinx-zynqmp-dma fd540000.dma: ZynqMP DMA driver Probe success
4861[ 2.331192] xilinx-zynqmp-dma fd550000.dma: ZynqMP DMA driver Probe success
4862[ 2.338108] xilinx-zynqmp-dma fd560000.dma: ZynqMP DMA driver Probe success
4863[ 2.345031] xilinx-zynqmp-dma fd570000.dma: ZynqMP DMA driver Probe success
4864[ 2.351989] xilinx-zynqmp-dma ffa80000.dma: ZynqMP DMA driver Probe success
4865[ 2.358872] xilinx-zynqmp-dma ffa90000.dma: ZynqMP DMA driver Probe success
4866[ 2.365794] xilinx-zynqmp-dma ffaa0000.dma: ZynqMP DMA driver Probe success
4867[ 2.372708] xilinx-zynqmp-dma ffab0000.dma: ZynqMP DMA driver Probe success
4868[ 2.379635] xilinx-zynqmp-dma ffac0000.dma: ZynqMP DMA driver Probe success
4869[ 2.386557] xilinx-zynqmp-dma ffad0000.dma: ZynqMP DMA driver Probe success
4870[ 2.393472] xilinx-zynqmp-dma ffae0000.dma: ZynqMP DMA driver Probe success
4871[ 2.400394] xilinx-zynqmp-dma ffaf0000.dma: ZynqMP DMA driver Probe success
4872[ 2.428475] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
4873[ 2.435948] ff000000.serial: ttyPS1 at MMIO 0xff000000 (irq = 46, base_baud = 6250000) is a xuartps
4874[ 2.444971] ff010000.serial: ttyPS0 at MMIO 0xff010000 (irq = 47, base_baud =·r¢ª?²êconsole [ttyPS0] enabled
4875[ 2.453916] console [ttyPS0] enabled
4876[ 2.460878] bootconsole [cdns0] disabled
4877[ 2.460878] bootconsole [cdns0] disabled
4878[ 2.468967] Unable to detect cache hierarchy from DT for CPU 0
4879[ 2.479463] brd: module loaded
4880[ 2.485243] loop: module loaded
4881[ 2.489216] ahci-ceva fd0c0000.ahci: AHCI 0001.0301 32 slots 2 ports 6 Gbps 0x3 impl platform mode
4882[ 2.498097] ahci-ceva fd0c0000.ahci: flags: 64bit ncq sntf pm clo only pmp fbs pio slum part ccc sds apst
4883[ 2.508825] scsi host0: ahci-ceva
4884[ 2.512247] scsi host1: ahci-ceva
4885[ 2.515582] ata1: SATA max UDMA/133 mmio [mem 0xfd0c0000-0xfd0c1fff] port 0x100 irq 43
4886[ 2.523411] ata2: SATA max UDMA/133 mmio [mem 0xfd0c0000-0xfd0c1fff] port 0x180 irq 43
4887[ 2.531482] mtdoops: mtd device (mtddev=name/number) must be supplied
4888[ 2.538854] zynqmp-qspi ff0f0000.spi: rx bus width not found
4889[ 2.544800] m25p80 spi0.0: found n25q00, expected n25q512a
4890[ 2.550505] m25p80 spi0.0: n25q00 (131072 Kbytes)
4891[ 2.555147] 5 ofpart partitions found on MTD device spi0.0
4892[ 2.560593] Creating 5 MTD partitions on "spi0.0":
4893[ 2.565368] 0x000000000000-0x000000500000 : "boot"
4894[ 2.570627] 0x000000500000-0x000000540000 : "bootenv"
4895[ 2.576011] 0x000000540000-0x000002740000 : "kernel"
4896[ 2.581295] 0x000002740000-0x000003740000 : "user"
4897[ 2.586412] 0x000003740000-0x000003750000 : "test"
4898[ 2.592413] libphy: Fixed MDIO Bus: probed
4899[ 2.597550] tun: Universal TUN/TAP device driver, 1.6
4900[ 2.602520] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
4901[ 2.608801] CAN device driver interface
4902[ 2.613120] macb ff0c0000.ethernet: Not enabling partial store and forward
4903[ 2.620433] libphy: MACB_mii_bus: probed
4904[ 2.698829] macb ff0c0000.ethernet eth0: Cadence GEM rev 0x50070106 at 0xff0c0000 irq 30 (00:0a:35:00:22:01)
4905[ 2.708576] Marvell 88E1510 ff0c0000.etherne:00: attached PHY driver [Marvell 88E1510] (mii_bus:phy_addr=ff0c0000.etherne:00, irq=-1)
4906[ 2.721180] usbcore: registered new interface driver asix
4907[ 2.726552] usbcore: registered new interface driver ax88179_178a
4908[ 2.732594] usbcore: registered new interface driver cdc_ether
4909[ 2.738411] usbcore: registered new interface driver net1080
4910[ 2.744050] usbcore: registered new interface driver cdc_subset
4911[ 2.749953] usbcore: registered new interface driver zaurus
4912[ 2.755522] usbcore: registered new interface driver cdc_ncm
4913[ 2.761481] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
4914[ 2.767926] ehci-pci: EHCI PCI platform driver
4915[ 2.772581] usbcore: registered new interface driver uas
4916[ 2.777848] usbcore: registered new interface driver usb-storage
4917[ 2.784119] mousedev: PS/2 mouse device common for all mice
4918[ 2.790026] rtc_zynqmp ffa60000.rtc: rtc core: registered ffa60000.rtc as rtc0
4919[ 2.797189] i2c /dev entries driver
4920[ 2.800819] cdns-i2c ff020000.i2c: 400 kHz mmio ff020000 irq 32
4921[ 2.806877] cdns-i2c ff030000.i2c: 400 kHz mmio ff030000 irq 33
4922[ 2.813647] usbcore: registered new interface driver uvcvideo
4923[ 2.819312] USB Video Class driver (1.1.1)
4924[ 2.823745] Bluetooth: HCI UART driver ver 2.3
4925[ 2.828107] Bluetooth: HCI UART protocol H4 registered
4926[ 2.833223] Bluetooth: HCI UART protocol BCSP registered
4927[ 2.838519] Bluetooth: HCI UART protocol LL registered
4928[ 2.843639] Bluetooth: HCI UART protocol ATH3K registered
4929[ 2.844748] ata2: SATA link down (SStatus 0 SControl 330)
4930[ 2.854401] Bluetooth: HCI UART protocol Three-wire (H5) registered
4931[ 2.860686] Bluetooth: HCI UART protocol Intel registered
4932[ 2.866068] Bluetooth: HCI UART protocol Broadcom registered
4933[ 2.871679] Bluetooth: HCI UART protocol QCA registered
4934[ 2.876921] usbcore: registered new interface driver bcm203x
4935[ 2.882562] usbcore: registered new interface driver bpa10x
4936[ 2.888112] usbcore: registered new interface driver bfusb
4937[ 2.893580] usbcore: registered new interface driver btusb
4938[ 2.899018] Bluetooth: Generic Bluetooth SDIO driver ver 0.1
4939[ 2.904713] usbcore: registered new interface driver ath3k
4940[ 2.910250] EDAC MC: ECC not enabled
4941[ 2.913877] EDAC DEVICE0: Giving out device to module edac controller cache_err: DEV edac (POLLED)
4942[ 2.922912] EDAC DEVICE1: Giving out device to module zynqmp-ocm-edac controller zynqmp_ocm: DEV ff960000.memory-controller (INTERRUPT)
4943[ 2.935212] sdhci: Secure Digital Host Controller Interface driver
4944[ 2.941307] sdhci: Copyright(c) Pierre Ossman
4945[ 2.945646] sdhci-pltfm: SDHCI platform and OF driver helper
4946[ 2.998565] mmc0: SDHCI controller on ff160000.sdhci [ff160000.sdhci] using ADMA 64-bit
4947[ 3.002566] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 330)
4948[ 3.002771] ata1.00: ATA-8: InnoDisk SATA Slim D150Q, 120925, max UDMA/133
4949[ 3.002774] ata1.00: 15649200 sectors, multi 16: LBA NCQ (depth 31/32)
4950[ 3.002999] ata1.00: configured for UDMA/133
4951[ 3.010845] scsi 0:0:0:0: Direct-Access ATA InnoDisk SATA Sl 25 PQ: 0 ANSI: 5
4952[ 3.038553] ledtrig-cpu: registered to indicate activity on CPUs
4953[ 3.044603] usbcore: registered new interface driver usbhid
4954[ 3.050085] usbhid: USB HID core driver
4955[ 3.055514] fpga_manager fpga0: Xilinx ZynqMP FPGA Manager registered
4956[ 3.062410] xilinx-dp-snd-pcm dp_snd_pcm0: Xilinx DisplayPort Sound PCM probed
4957[ 3.069586] xilinx-dp-snd-pcm dp_snd_pcm1: Xilinx DisplayPort Sound PCM probed
4958[ 3.076927] PLL: shutdown
4959[ 3.080350] Write failed to divider address:fd1a007c
4960[ 3.085388] PLL: enable
4961[ 3.087912] xilinx-dp-snd-codec dp_snd_codec0: Xilinx DisplayPort Sound Codec probed
4962[ 3.096010] xilinx-dp-snd-card dp_snd_card: xilinx-dp-snd-codec-dai <-> xilinx-dp-snd-codec-dai mapping ok
4963[ 3.096416] sd 0:0:0:0: [sda] 15649200 512-byte logical blocks: (8.01 GB/7.46 GiB)
4964[ 3.096512] sd 0:0:0:0: [sda] Write Protect is off
4965[ 3.096558] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
4966[ 3.097396] sda: sda1
4967[ 3.097968] sd 0:0:0:0: [sda] Attached SCSI disk
4968[ 3.134031] xilinx-dp-snd-card dp_snd_card: xilinx-dp-snd-codec-dai <-> xilinx-dp-snd-codec-dai mapping ok
4969[ 3.144662] xilinx-dp-snd-card dp_snd_card: Xilinx DisplayPort Sound Card probed
4970[ 3.152115] pktgen: Packet Generator for packet performance testing. Version: 2.75
4971[ 3.160769] Netfilter messages via NETLINK v0.30.
4972[ 3.165518] ip_tables: (C) 2000-2006 Netfilter Core Team
4973[ 3.170797] Initializing XFRM netlink socket
4974[ 3.175068] NET: Registered protocol family 10
4975[ 3.179899] ip6_tables: (C) 2000-2006 Netfilter Core Team
4976[ 3.185259] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver
4977[ 3.191472] NET: Registered protocol family 17
4978[ 3.195844] NET: Registered protocol family 15
4979[ 3.200268] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this.
4980[ 3.213192] Ebtables v2.0 registered
4981[ 3.216800] can: controller area network core (rev 20120528 abi 9)
4982[ 3.222944] NET: Registered protocol family 29
4983[ 3.227340] can: raw protocol (rev 20120528)
4984[ 3.231591] can: broadcast manager protocol (rev 20161123 t)
4985[ 3.237235] can: netlink gateway (rev 20130117) max_hops=1
4986[ 3.244742] Bluetooth: RFCOMM TTY layer initialized
4987[ 3.249540] Bluetooth: RFCOMM socket layer initialized
4988[ 3.254666] Bluetooth: RFCOMM ver 1.11
4989[ 3.258385] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
4990[ 3.263683] Bluetooth: BNEP filters: protocol multicast
4991[ 3.268893] Bluetooth: BNEP socket layer initialized
4992[ 3.273837] Bluetooth: HIDP (Human Interface Emulation) ver 1.2
4993[ 3.279743] Bluetooth: HIDP socket layer initialized
4994[ 3.284890] 9pnet: Installing 9P2000 support
4995[ 3.289087] Key type dns_resolver registered
4996[ 3.293748] registered taskstats version 1
4997[ 3.298131] Btrfs loaded, crc32c=crc32c-generic
4998[ 3.310311] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller
4999[ 3.315743] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 1
5000[ 3.323617] xhci-hcd xhci-hcd.0.auto: hcc params 0x0238f625 hci version 0x100 quirks 0x02010010
5001[ 3.332270] xhci-hcd xhci-hcd.0.auto: irq 229, io mem 0xfe300000
5002[ 3.338336] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
5003[ 3.345043] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
5004[ 3.352246] usb usb1: Product: xHCI Host Controller
5005[ 3.357104] usb usb1: Manufacturer: Linux 4.9.0 xhci-hcd
5006[ 3.362399] usb usb1: SerialNumber: xhci-hcd.0.auto
5007[ 3.367562] hub 1-0:1.0: USB hub found
5008[ 3.371248] hub 1-0:1.0: 1 port detected
5009[ 3.375244] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller
5010[ 3.380651] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 2
5011[ 3.388317] usb usb2: We don't know the algorithms for LPM for this host, disabling LPM.
5012[ 3.396419] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003
5013[ 3.403128] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
5014[ 3.410330] usb usb2: Product: xHCI Host Controller
5015[ 3.415191] usb usb2: Manufacturer: Linux 4.9.0 xhci-hcd
5016[ 3.420485] usb usb2: SerialNumber: xhci-hcd.0.auto
5017[ 3.425556] hub 2-0:1.0: USB hub found
5018[ 3.429233] hub 2-0:1.0: 1 port detected
5019[ 3.433515] rtc_zynqmp ffa60000.rtc: setting system clock to 1970-01-01 00:00:15 UTC (15)
5020[ 3.441716] clk: Not disabling unused clocks
5021[ 3.445904] ALSA device list:
5022[ 3.448852] #0: DisplayPort monitor
5023[ 3.453120] Freeing unused kernel memory: 448K (ffffffc000b70000 - ffffffc000be0000)
5024INIT: version 2.88 booting
5025Starting udev
5026[ 3.569116] udevd[1623]: starting version 3.2
5027[ 3.573793] random: udevd: uninitialized urandom read (16 bytes read)
5028[ 3.580246] random: udevd: uninitialized urandom read (16 bytes read)
5029[ 3.586665] random: udevd: uninitialized urandom read (16 bytes read)
5030[ 3.593083] random: udevd: uninitialized urandom read (16 bytes read)
5031[ 3.603103] udevd[1624]: starting eudev-3.2
5032[ 3.646883] random: udevd: uninitialized urandom read (16 bytes read)
5033[ 3.656963] random: udevd: uninitialized urandom read (16 bytes read)
5034[ 3.666821] 4fm: loading out-of-tree module taints kernel.
5035[ 3.674913] pci 0000:00:00.0: enabling device (0000 -> 0002)
5036[ 3.680599] 4FM 0000:01:00.0: enabling device (0000 -> 0002)
5037[ 3.686218] Accessing 47232 of total 1 entries in dev->bar
5038[ 3.686249] <dma1> init: registered
5039[ 3.695176] dev->bar[u].virt_address:cfb607c value:38011121
5040[ 3.700685] dev->bar[u].virt_address:cfb6080 value:deadbeef
5041[ 3.706285] dev->bar[u].virt_address:cfb6084 value:baadf00d
5042[ 3.711800] dev->bar[u].virt_address:cfb6088 value:eba00eba
5043[ 3.717381] dev->bar[u].virt_address:cfb608c value:beefdeaf
5044[ 3.729346] <dma2> init: registered
5045[ 3.766232] /media/yocto4/vp880/VP88x_2017_3_PRJ0191/build/tmp/work/plnx_aarch64-xilinx-linux/4fm/1.0-r0/4fm.c: found 1 devices
5046[ 3.979774] FAT-fs (sda1): Volume was not properly unmounted. Some data may be corrupt. Please run fsck.
5047Populating dev cache
5048[ 4.241229] random: dd: uninitialized urandom read (512 bytes read)
5049Thu Jul 26 08:51:43 UTC 2018
5050Starting internet superserver: inetd.
5051Running postinst /etc/rpm-postinsts/100-sysvinit-inittab...
5052update-rc.d: /etc/init.d/run-postinsts exists during rc.d purge (continuing)
5053INIT: Entering runlevel: 5
5054Hello World
5055[22]:0x12
5056[20]:0x201
5057[20]:0x201
5058[22]:0x1
5059[0]:0x140
5060[0]:0x140
5061Configuring network interfaces... [ 4.540685] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
5062done.
5063Starting Dropbear SSH server: [ 4.569390] random: dropbearkey: uninitialized urandom read (32 bytes read)
5064[ 4.579437] random: dropbearkey: uninitialized urandom read (32 bytes read)
5065Generating key, this may take a while...
5066[ 5.554674] macb ff0c0000.ethernet eth0: link up (1000/Full)
5067[ 5.560278] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
5068
5069
5070
5071
5072
5073
5074
5075
5076[ 16.356606] random: dropbearkey: uninitialized urandom read (32 bytes read)
5077Public key portion is:
5078ssh-rsa AAAAB3NzaC1yc2EAAAADAQABAAABAQCWzjlgP6W3MXaOBUc0iijIgkOqgk3gaY9156/YqrWIfz+WOtVc4DbL+V8Tr2PCEwdUDhiuExjJNnA5KxbkITl5RQzToZMJAilKisPGi4utvj+kYntp49tdNuOTJzHtTk2JERp+CNZNOZJJtI5uk6m9jzAbQ72a7I+y7MTQNcIc96SU5mcQWAgq//KtHkbP+ERrmg56tHZtWS+c0N097QX8W6GKi4eXDGX57Snde4qged8ZKi4XhZYcG0JCw03pTIjodMY/ck5dUC04lBwW1Nuo8bUSIEuD/w0b7Nz4ueDlOXD/fee0v4WuVkUoj+2UA13IwzirnYbCiU5brDWZ8+RH root@VP88x_2017_3_PRJ0191
5079Fingerprint: md5 b9:d1:79:21:26:f8:83:fe:16:64:dd:7b:00:28:a6:b9
5080dropbear.
5081Starting syslogd/klogd: done
5082[ 16.410261] random: fast init done
5083[ 16.865974] random: crng init done
5084
5085
5086
5087
5088[ 18.662091] jffs2: notice: (2119) jffs2_build_xattr_subsystem: complete building xattr subsystem, 0 of xdatum (0 unchecked, 0 orphan) and 0 of xref (0 dead, 0 orphan) found.
5089hello world.....
5090Starting tcf-agent: OK
5091
5092root@VP88x_2017_3_PRJ0191:~#
5093root@VP88x_2017_3_PRJ0191:~#
5094root@VP88x_2017_3_PRJ0191:~#
5095root@VP88x_2017_3_PRJ0191:~# Fmc134APP 0 1 1 1 1
5096UnitAPI version : 1.3.8 : Enumerating units in the system, please wait...
5097
5098Global Units:
5099Global Unit 0 is on Device 'VP880' (P0): Internal Unit 0 is star 0x01C4 (axi_vp880_8l_host_if) with index 1 of star type 0x000D (Host Interface)
5100Global Unit 1 is on Device 'VP880' (P0): Internal Unit 1 is star 0x0203 (Unknown) with index 0 of star type 0x0005 (ADC)
5101Global Unit 2 is on Device 'VP880' (P0): Internal Unit 2 is star 0x015C (axi_intrc16) with index 0 of star type 0x0014 (Interrupt Controller)
5102Global Unit 3 is on Device 'VP880' (P0): Internal Unit 3 is star 0x014C (axi_i2c_master) with index 0 of star type 0x000E (3rd Party Logic)
5103Global Unit 4 is on Device 'VP880' (P0): Internal Unit 4 is star 0x0202 (Unknown) with index 0 of star type 0x0003 (Memory FIFO)
5104Global Unit 5 is on Device 'VP880' (P0): Internal Unit 5 is star 0x01C5 (axi_vp880_ddr4_fifo) with index 0 of star type 0x0003 (Memory FIFO)
5105
5106
5107Running 'VP880-FMC134' on PCIe, CID725
5108
5109-----------------------------------------------------------
5110Device 'VP880' (P0)
5111-----------------------------------------------------------
5112Constellation ID : 759
5113Number Of Stars : 19
5114Software Build Code: 1524177589 (Thu Apr 19 22:39:49 2018)
5115Firmware Build Code: 0
5116Firmware Revision : 1.2
5117-----------------------------------------------------------
5118
5119 - Unit 0 is VP88x host interface star
5120
5121-------- Onboard Monitoring (ADC Monitor) ---------
5122Temp ( AD7291 ) : OK (54.75C)
5123Vin0 ( ADC0 1.1Va ) : OK ( 1.13V)
5124Vin1 ( ADC0 1.1Vdig ) : OK ( 1.12V)
5125Vin2 ( ADC0 1.9Va ) : OK ( 1.92V)
5126Vin3 ( ADC1 1.1Va ) : OK ( 1.14V)
5127Vin4 ( ADC1 1.1Vdig ) : OK ( 1.13V)
5128Vin5 ( ADC1 1.9Va ) : OK ( 1.92V)
5129
5130Vin6 ( ADC0 raw ) : OK (0.682V)
5131Vin6 ( ADC0 Temp ) : OK (67.65C)
5132
5133Vin7 ( ADC1 raw ) : OK (0.683V)
5134Vin7 ( ADC1 Temp ) : OK (66.89C)
5135---------------------------------------------------
5136
5137
5138-------- Onboard Monitoring (Voltage Monitor) ---------
5139Temp ( AD7291 ) : OK (53.00C)
5140Vin0 ( 5.5Vosc ) : OK ( 5.50V)
5141Vin1 ( 3.3Vclk ) : OK ( 3.24V)
5142Vin2 ( 3.3Vlmx ) : OK ( 3.30V)
5143Vin3 ( 1.8Vcpld ) : OK ( 1.80V)
5144Vin4 ( Vadj ) : OK ( 1.81V)
5145Vin5 ( 3.3Vfmc ) : OK ( 3.24V)
5146Vin6 ( 12.0Vfmc ) : OK (11.95V)
5147Vin7 ( Viob ) : OK ( 1.81V)
5148-------------------------------------------------------
5149
5150Configuring clock tree ...
5151
5152
5153 Setting Clock_Mode
5154Internal Reference Mode
5155Using LMX2581 PLL as Clock Source
5156Xilinx Zynq MP First Stage Boot Loader
5157Release 2017.3 May 24 2018 - 10:35:53
5158Marvell PHY reset
5159SI5338 0x70 not configured
5160SI5338 0x70 configuration finished
5161SI5338 0x71 not configured
5162SI5338 0x71 configuration finished
5163
5164
5165U-Boot 2017.01 (Jul 26 2018 - 02:50:11 -0600) Xilinx ZynqMP ZCU102 revB
5166
5167I2C: ready
5168DRAM: 2 GiB
5169EL Level: EL2
5170Chip ID: xczu3eg
5171MMC: Card did not respond to voltage select!
5172sdhci@ff160000 - probe failed: -95
5173Card did not respond to voltage select!
5174
5175zynqmp_qspi_ofdata_to_platdata: CLK 300000000
5176SF: Detected n25q1024 with page size 256 Bytes, erase size 64 KiB, total 128 MiB
5177*** Warning - bad CRC, using default environment
5178
5179In: serial
5180Out: serial
5181Err: serial
5182Bootmode: QSPI_MODE
5183Net: ZYNQ GEM: ff0c0000, phyaddr c, interface rgmii-id
5184eth0: ethernet@ff0c0000
5185U-BOOT for VP88x_2017_3_PRJ0191
5186
5187Hit any key to stop autoboot: 0
5188SF: Detected n25q1024 with page size 256 Bytes, erase size 64 KiB, total 128 MiB
5189device 0 offset 0x540000, size 0x2200000
5190SF: 35651584 bytes @ 0x540000 Read: OK
5191## Loading kernel from FIT Image at 10000000 ...
5192 Using 'conf@1' configuration
5193 Trying 'kernel@0' kernel subimage
5194 Description: Linux Kernel
5195 Type: Kernel Image
5196 Compression: uncompressed
5197 Data Start: 0x100000d8
5198 Data Size: 12503552 Bytes = 11.9 MiB
5199 Architecture: AArch64
5200 OS: Linux
5201 Load Address: 0x00080000
5202 Entry Point: 0x00080000
5203 Hash algo: sha1
5204 Hash value: 6738559f9c7602fa2a0ff36fdfc8cf5b9b3e6565
5205 Verifying Hash Integrity ... sha1+ OK
5206## Loading ramdisk from FIT Image at 10000000 ...
5207 Using 'conf@1' configuration
5208 Trying 'ramdisk@0' ramdisk subimage
5209 Description: ramdisk
5210 Type: RAMDisk Image
5211 Compression: uncompressed
5212 Data Start: 0x10bf54e4
5213 Data Size: 8973721 Bytes = 8.6 MiB
5214 Architecture: AArch64
5215 OS: Linux
5216 Load Address: unavailable
5217 Entry Point: unavailable
5218 Hash algo: sha1
5219 Hash value: 4b595c4e0c42ac8967d3d732b389c6521f0b492f
5220 Verifying Hash Integrity ... sha1+ OK
5221## Loading fdt from FIT Image at 10000000 ...
5222 Using 'conf@1' configuration
5223 Trying 'fdt@0' fdt subimage
5224 Description: Flattened Device Tree blob
5225 Type: Flat Device Tree
5226 Compression: uncompressed
5227 Data Start: 0x10becbd0
5228 Data Size: 34910 Bytes = 34.1 KiB
5229 Architecture: AArch64
5230 Hash algo: sha1
5231 Hash value: 20fc450d3d82f1967aba254f93c3704b6f5d1f6e
5232 Verifying Hash Integrity ... sha1+ OK
5233 Booting using the fdt blob at 0x10becbd0
5234 Loading Kernel Image ... OK
5235 Loading Ramdisk to 07771000, end 07fffd99 ... OK
5236 Loading Device Tree to 0000000007765000, end 000000000777085d ... OK
5237
5238Starting kernel ...
5239
5240[ 0.000000] Booting Linux on physical CPU 0x0
5241[ 0.000000] Linux version 4.9.0 (user@user-VirtualBox) (gcc version 6.2.1 20161016 (Linaro GCC 6.2-2016.11) ) #1 SMP Thu Jul 26 01:50:46 MDT 2018
5242[ 0.000000] Boot CPU: AArch64 Processor [410fd034]
5243[ 0.000000] earlycon: cdns0 at MMIO 0x00000000ff010000 (options '115200n8')
5244[ 0.000000] bootconsole [cdns0] enabled
5245[ 0.000000] efi: Getting EFI parameters from FDT:
5246[ 0.000000] efi: UEFI not found.
5247[ 0.000000] cma: Reserved 512 MiB at 0x0000000060000000
5248[ 0.000000] psci: probing for conduit method from DT.
5249[ 0.000000] psci: PSCIv1.0 detected in firmware.
5250[ 0.000000] psci: Using standard PSCI v0.2 function IDs
5251[ 0.000000] psci: MIGRATE_INFO_TYPE not supported.
5252[ 0.000000] percpu: Embedded 21 pages/cpu @ffffffc05ff76000 s46232 r8192 d31592 u86016
5253[ 0.000000] Detected VIPT I-cache on CPU0
5254[ 0.000000] CPU features: enabling workaround for ARM erratum 845719
5255[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 517120
5256[ 0.000000] Kernel command line: console=ttyPS0,115200 earlyprintk earlycon=cdns,mmio,0xFF010000,115200n8 uio_pdrv_genirq.of_id=generic-uio clk_ignore_unused cma=512M coherent_pool=64MiB
5257[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
5258[ 0.000000] Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes)
5259[ 0.000000] Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes)
5260[ 0.000000] Memory: 1519128K/2097152K available (8508K kernel code, 562K rwdata, 2636K rodata, 448K init, 382K bss, 53736K reserved, 524288K cma-reserved)
5261[ 0.000000] Virtual kernel memory layout:
5262[ 0.000000] modules : 0xffffff8000000000 - 0xffffff8008000000 ( 128 MB)
5263[ 0.000000] vmalloc : 0xffffff8008000000 - 0xffffffbebfff0000 ( 250 GB)
5264[ 0.000000] .text : 0xffffff8008080000 - 0xffffff80088d0000 ( 8512 KB)
5265[ 0.000000] .rodata : 0xffffff80088d0000 - 0xffffff8008b70000 ( 2688 KB)
5266[ 0.000000] .init : 0xffffff8008b70000 - 0xffffff8008be0000 ( 448 KB)
5267[ 0.000000] .data : 0xffffff8008be0000 - 0xffffff8008c6ca00 ( 563 KB)
5268[ 0.000000] .bss : 0xffffff8008c6ca00 - 0xffffff8008ccc434 ( 383 KB)
5269[ 0.000000] fixed : 0xffffffbefe7fd000 - 0xffffffbefec00000 ( 4108 KB)
5270[ 0.000000] PCI I/O : 0xffffffbefee00000 - 0xffffffbeffe00000 ( 16 MB)
5271[ 0.000000] vmemmap : 0xffffffbf00000000 - 0xffffffc000000000 ( 4 GB maximum)
5272[ 0.000000] 0xffffffbf00000000 - 0xffffffbf01c00000 ( 28 MB actual)
5273[ 0.000000] memory : 0xffffffc000000000 - 0xffffffc080000000 ( 2048 MB)
5274[ 0.000000] Hierarchical RCU implementation.
5275[ 0.000000] Build-time adjustment of leaf fanout to 64.
5276[ 0.000000] RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=4.
5277[ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=64, nr_cpu_ids=4
5278[ 0.000000] NR_IRQS:64 nr_irqs:64 0
5279[ 0.000000] GIC: Adjusting CPU interface base to 0x00000000f902f000
5280[ 0.000000] GIC: Using split EOI/Deactivate mode
5281[ 0.000000] arm_arch_timer: Architected cp15 timer(s) running at 50.00MHz (phys).
5282[ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0xb8812736b, max_idle_ns: 440795202655 ns
5283[ 0.000003] sched_clock: 56 bits at 50MHz, resolution 20ns, wraps every 4398046511100ns
5284[ 0.008253] Console: colour dummy device 80x25
5285[ 0.012527] Calibrating delay loop (skipped), value calculated using timer frequency.. 100.00 BogoMIPS (lpj=200000)
5286[ 0.022886] pid_max: default: 32768 minimum: 301
5287[ 0.027579] Mount-cache hash table entries: 4096 (order: 3, 32768 bytes)
5288[ 0.034138] Mountpoint-cache hash table entries: 4096 (order: 3, 32768 bytes)
5289[ 0.041867] ASID allocator initialised with 65536 entries
5290[ 0.047561] zynqmp_plat_init Power management API v0.3
5291[ 0.052578] EFI services will not be available.
5292[ 0.057340] Detected VIPT I-cache on CPU1
5293[ 0.057375] CPU1: Booted secondary processor [410fd034]
5294[ 0.057637] Detected VIPT I-cache on CPU2
5295[ 0.057653] CPU2: Booted secondary processor [410fd034]
5296[ 0.057905] Detected VIPT I-cache on CPU3
5297[ 0.057922] CPU3: Booted secondary processor [410fd034]
5298[ 0.057955] Brought up 4 CPUs
5299[ 0.088237] SMP: Total of 4 processors activated.
5300[ 0.092913] CPU features: detected feature: 32-bit EL0 Support
5301[ 0.098710] CPU: All CPU(s) started at EL2
5302[ 0.102782] alternatives: patching kernel code
5303[ 0.108042] devtmpfs: initialized
5304[ 0.115575] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
5305[ 0.136603] xor: measuring software checksum speed
5306[ 0.181272] 8regs : 2543.000 MB/sec
5307[ 0.221296] 8regs_prefetch: 2266.000 MB/sec
5308[ 0.265664] 32regs : 3125.000 MB/sec
5309[ 0.305692] 32regs_prefetch: 2627.000 MB/sec
5310[ 0.310113] xor: using function: 32regs (3125.000 MB/sec)
5311[ 0.315571] pinctrl core: initialized pinctrl subsystem
5312[ 0.321248] NET: Registered protocol family 16
5313[ 0.326391] Failed to initialise IOMMU /amba/smmu@fd800000
5314[ 0.331887] vdso: 2 pages (1 code @ ffffff80088d7000, 1 data @ ffffff8008be4000)
5315[ 0.339092] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers.
5316[ 0.374376] DMA: preallocated 65536 KiB pool for atomic allocations
5317[ 0.390743] reset_zynqmp reset-controller: Xilinx zynqmp reset driver probed
5318[ 0.398224] ARM CCI_400_r1 PMU driver probed[ 0.405004] zynqmp-pinctrl ff180000.pinctrl: zynqmp pinctrl initialized
5319[ 0.439768] HugeTLB registered 2 MB page size, pre-allocated 0 pages
5320[ 0.512952] raid6: int64x1 gen() 448 MB/s
5321[ 0.584983] raid6: int64x1 xor() 486 MB/s
5322[ 0.657011] raid6: int64x2 gen() 741 MB/s
5323[ 0.729046] raid6: int64x2 xor() 661 MB/s
5324[ 0.801074] raid6: int64x4 gen() 1086 MB/s
5325[ 0.873104] raid6: int64x4 xor() 816 MB/s
5326[ 0.945167] raid6: int64x8 gen() 1266 MB/s
5327[ 1.017205] raid6: int64x8 xor() 824 MB/s
5328[ 1.089294] raid6: neonx1 gen() 797 MB/s
5329[ 1.161291] raid6: neonx1 xor() 837 MB/s
5330[ 1.233336] raid6: neonx2 gen() 1286 MB/s
5331[ 1.305370] raid6: neonx2 xor() 1143 MB/s
5332[ 1.377420] raid6: neonx4 gen() 1664 MB/s
5333[ 1.449436] raid6: neonx4 xor() 1306 MB/s
5334[ 1.521488] raid6: neonx8 gen() 1752 MB/s
5335[ 1.593532] raid6: neonx8 xor() 1349 MB/s
5336[ 1.597613] raid6: using algorithm neonx8 gen() 1752 MB/s
5337[ 1.602975] raid6: .... xor() 1349 MB/s, rmw enabled
5338[ 1.607906] raid6: using intx1 recovery algorithm
5339[ 1.613057] Write failed gate address:1000f02
5340[ 1.620958] SCSI subsystem initialized
5341[ 1.624743] usbcore: registered new interface driver usbfs
5342[ 1.630070] usbcore: registered new interface driver hub
5343[ 1.635351] usbcore: registered new device driver usb
5344[ 1.640400] media: Linux media interface: v0.10
5345[ 1.644849] Linux video capture interface: v2.00
5346[ 1.649437] pps_core: LinuxPPS API ver. 1 registered
5347[ 1.654340] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
5348[ 1.663433] PTP clock support registered
5349[ 1.667334] EDAC MC: Ver: 3.0.0
5350[ 1.670689] FPGA manager framework
5351[ 1.674037] fpga-region fpga-full: FPGA Region probed
5352[ 1.679038] Advanced Linux Sound Architecture Driver Initialized.
5353[ 1.685295] Bluetooth: Core ver 2.22
5354[ 1.688703] NET: Registered protocol family 31
5355[ 1.693093] Bluetooth: HCI device and connection manager initialized
5356[ 1.699411] Bluetooth: HCI socket layer initialized
5357[ 1.704253] Bluetooth: L2CAP socket layer initialized
5358[ 1.709278] Bluetooth: SCO socket layer initialized
5359[ 1.714706] clocksource: Switched to clocksource arch_sys_counter
5360[ 1.720702] VFS: Disk quotas dquot_6.6.0
5361[ 1.724536] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
5362[ 1.735577] NET: Registered protocol family 2
5363[ 1.740128] TCP established hash table entries: 16384 (order: 5, 131072 bytes)
5364[ 1.747244] TCP bind hash table entries: 16384 (order: 6, 262144 bytes)
5365[ 1.754015] TCP: Hash tables configured (established 16384 bind 16384)
5366[ 1.760415] UDP hash table entries: 1024 (order: 3, 32768 bytes)
5367[ 1.766349] UDP-Lite hash table entries: 1024 (order: 3, 32768 bytes)
5368[ 1.772859] NET: Registered protocol family 1
5369[ 1.777289] RPC: Registered named UNIX socket transport module.
5370[ 1.783014] RPC: Registered udp transport module.
5371[ 1.787684] RPC: Registered tcp transport module.
5372[ 1.792352] RPC: Registered tcp NFSv4.1 backchannel transport module.
5373[ 1.798896] Trying to unpack rootfs image as initramfs...
5374[ 2.121995] Freeing initrd memory: 8760K (ffffffc007771000 - ffffffc007fff000)
5375[ 2.129420] hw perfevents: enabled with armv8_pmuv3 PMU driver, 7 counters available
5376[ 2.137724] futex hash table entries: 1024 (order: 5, 131072 bytes)
5377[ 2.144386] workingset: timestamp_bits=62 max_order=19 bucket_order=0
5378[ 2.151311] NFS: Registering the id_resolver key type
5379[ 2.156198] Key type id_resolver registered
5380[ 2.160323] Key type id_legacy registered
5381[ 2.164309] nfs4filelayout_init: NFSv4 File Layout Driver Registering...
5382[ 2.170980] ntfs: driver 2.1.32 [Flags: R/W].
5383[ 2.175305] jffs2: version 2.2. (NAND) (SUMMARY) © 2001-2006 Red Hat, Inc.
5384[ 2.190072] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 247)
5385[ 2.197287] io scheduler noop registered
5386[ 2.201169] io scheduler deadline registered
5387[ 2.205413] io scheduler cfq registered (default)
5388[ 2.210672] nwl-pcie fd0e0000.pcie: Link is UP
5389[ 2.214960] OF: PCI: host bridge /amba/pcie@fd0e0000 ranges:
5390[ 2.220562] OF: PCI: MEM 0xe0000000..0xefffffff -> 0xe0000000
5391[ 2.226430] OF: PCI: MEM 0x600000000..0x7ffffffff -> 0x600000000
5392[ 2.232654] nwl-pcie fd0e0000.pcie: PCI host bridge to bus 0000:00
5393[ 2.238715] pci_bus 0000:00: root bus resource [bus 00-ff]
5394[ 2.244161] pci_bus 0000:00: root bus resource [mem 0xe0000000-0xefffffff]
5395[ 2.250997] pci_bus 0000:00: root bus resource [mem 0x600000000-0x7ffffffff pref]
5396[ 2.258927] pci 0000:00:00.0: BAR 8: assigned [mem 0xe0000000-0xe00fffff]
5397[ 2.265521] pci 0000:01:00.0: BAR 0: assigned [mem 0xe0000000-0xe00007ff]
5398[ 2.272269] pci 0000:00:00.0: PCI bridge to [bus 01-0c]
5399[ 2.277456] pci 0000:00:00.0: bridge window [mem 0xe0000000-0xe00fffff]
5400[ 2.284933] xilinx-dpdma fd4c0000.dma: Xilinx DPDMA engine is probed
5401[ 2.291305] xilinx-vdma 400000000.dma: Xilinx AXI VDMA Engine Driver Probed!!
5402[ 2.298358] xilinx-vdma 400010000.dma: Xilinx AXI VDMA Engine Driver Probed!!
5403[ 2.305510] xilinx-zynqmp-dma fd500000.dma: ZynqMP DMA driver Probe success
5404[ 2.312368] xilinx-zynqmp-dma fd510000.dma: ZynqMP DMA driver Probe success
5405[ 2.319289] xilinx-zynqmp-dma fd520000.dma: ZynqMP DMA driver Probe success
5406[ 2.326209] xilinx-zynqmp-dma fd530000.dma: ZynqMP DMA driver Probe success
5407[ 2.333129] xilinx-zynqmp-dma fd540000.dma: ZynqMP DMA driver Probe success
5408[ 2.340054] xilinx-zynqmp-dma fd550000.dma: ZynqMP DMA driver Probe success
5409[ 2.346966] xilinx-zynqmp-dma fd560000.dma: ZynqMP DMA driver Probe success
5410[ 2.353891] xilinx-zynqmp-dma fd570000.dma: ZynqMP DMA driver Probe success
5411[ 2.360851] xilinx-zynqmp-dma ffa80000.dma: ZynqMP DMA driver Probe success
5412[ 2.367729] xilinx-zynqmp-dma ffa90000.dma: ZynqMP DMA driver Probe success
5413[ 2.374647] xilinx-zynqmp-dma ffaa0000.dma: ZynqMP DMA driver Probe success
5414[ 2.381570] xilinx-zynqmp-dma ffab0000.dma: ZynqMP DMA driver Probe success
5415[ 2.388491] xilinx-zynqmp-dma ffac0000.dma: ZynqMP DMA driver Probe success
5416[ 2.395409] xilinx-zynqmp-dma ffad0000.dma: ZynqMP DMA driver Probe success
5417[ 2.402330] xilinx-zynqmp-dma ffae0000.dma: ZynqMP DMA driver Probe success
5418[ 2.409252] xilinx-zynqmp-dma ffaf0000.dma: ZynqMP DMA driver Probe success
5419[ 2.437594] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
5420[ 2.445068] ff000000.serial: ttyPS1 at MMIO 0xff000000 (irq = 46, base_baud = 6250000) is a xuartps
5421[ 2.454137] ff010000.serial: ttyPS0 at MMIO 0xff010000 (irq = 47, base_baud =·r¢²?êconsole [ttyPS0] enabled
5422[ 2.463082] console [ttyPS0] enabled
5423[ 2.470048] bootconsole [cdns0] disabled
5424[ 2.470048] bootconsole [cdns0] disabled
5425[ 2.478108] Unable to detect cache hierarchy from DT for CPU 0
5426[ 2.488391] brd: module loaded
5427[ 2.494209] loop: module loaded
5428[ 2.498188] ahci-ceva fd0c0000.ahci: AHCI 0001.0301 32 slots 2 ports 6 Gbps 0x3 impl platform mode
5429[ 2.507066] ahci-ceva fd0c0000.ahci: flags: 64bit ncq sntf pm clo only pmp fbs pio slum part ccc sds apst
5430[ 2.517811] scsi host0: ahci-ceva
5431[ 2.521229] scsi host1: ahci-ceva
5432[ 2.524566] ata1: SATA max UDMA/133 mmio [mem 0xfd0c0000-0xfd0c1fff] port 0x100 irq 43
5433[ 2.532396] ata2: SATA max UDMA/133 mmio [mem 0xfd0c0000-0xfd0c1fff] port 0x180 irq 43
5434[ 2.540431] mtdoops: mtd device (mtddev=name/number) must be supplied
5435[ 2.547766] zynqmp-qspi ff0f0000.spi: rx bus width not found
5436[ 2.553698] m25p80 spi0.0: found n25q00, expected n25q512a
5437[ 2.559420] m25p80 spi0.0: n25q00 (131072 Kbytes)
5438[ 2.564056] 5 ofpart partitions found on MTD device spi0.0
5439[ 2.569501] Creating 5 MTD partitions on "spi0.0":
5440[ 2.574278] 0x000000000000-0x000000500000 : "boot"
5441[ 2.579542] 0x000000500000-0x000000540000 : "bootenv"
5442[ 2.584927] 0x000000540000-0x000002740000 : "kernel"
5443[ 2.590206] 0x000002740000-0x000003740000 : "user"
5444[ 2.595326] 0x000003740000-0x000003750000 : "test"
5445[ 2.601325] libphy: Fixed MDIO Bus: probed
5446[ 2.606450] tun: Universal TUN/TAP device driver, 1.6
5447[ 2.611419] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
5448[ 2.617699] CAN device driver interface
5449[ 2.622020] macb ff0c0000.ethernet: Not enabling partial store and forward
5450[ 2.629340] libphy: MACB_mii_bus: probed
5451[ 2.706981] macb ff0c0000.ethernet eth0: Cadence GEM rev 0x50070106 at 0xff0c0000 irq 30 (00:0a:35:00:22:01)
5452[ 2.716728] Marvell 88E1510 ff0c0000.etherne:00: attached PHY driver [Marvell 88E1510] (mii_bus:phy_addr=ff0c0000.etherne:00, irq=-1)
5453[ 2.729318] usbcore: registered new interface driver asix
5454[ 2.734684] usbcore: registered new interface driver ax88179_178a
5455[ 2.740730] usbcore: registered new interface driver cdc_ether
5456[ 2.746546] usbcore: registered new interface driver net1080
5457[ 2.752185] usbcore: registered new interface driver cdc_subset
5458[ 2.758089] usbcore: registered new interface driver zaurus
5459[ 2.763657] usbcore: registered new interface driver cdc_ncm
5460[ 2.769616] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
5461[ 2.776061] ehci-pci: EHCI PCI platform driver
5462[ 2.780715] usbcore: registered new interface driver uas
5463[ 2.785975] usbcore: registered new interface driver usb-storage
5464[ 2.792214] mousedev: PS/2 mouse device common for all mice
5465[ 2.798116] rtc_zynqmp ffa60000.rtc: rtc core: registered ffa60000.rtc as rtc0
5466[ 2.805283] i2c /dev entries driver
5467[ 2.808909] cdns-i2c ff020000.i2c: 400 kHz mmio ff020000 irq 32
5468[ 2.814970] cdns-i2c ff030000.i2c: 400 kHz mmio ff030000 irq 33
5469[ 2.821738] usbcore: registered new interface driver uvcvideo
5470[ 2.827397] USB Video Class driver (1.1.1)
5471[ 2.831829] Bluetooth: HCI UART driver ver 2.3
5472[ 2.836191] Bluetooth: HCI UART protocol H4 registered
5473[ 2.841307] Bluetooth: HCI UART protocol BCSP registered
5474[ 2.846602] Bluetooth: HCI UART protocol LL registered
5475[ 2.851722] Bluetooth: HCI UART protocol ATH3K registered
5476[ 2.852917] ata2: SATA link down (SStatus 0 SControl 330)
5477[ 2.862485] Bluetooth: HCI UART protocol Three-wire (H5) registered
5478[ 2.868773] Bluetooth: HCI UART protocol Intel registered
5479[ 2.874153] Bluetooth: HCI UART protocol Broadcom registered
5480[ 2.879759] Bluetooth: HCI UART protocol QCA registered
5481[ 2.885001] usbcore: registered new interface driver bcm203x
5482[ 2.890641] usbcore: registered new interface driver bpa10x
5483[ 2.896196] usbcore: registered new interface driver bfusb
5484[ 2.901665] usbcore: registered new interface driver btusb
5485[ 2.907102] Bluetooth: Generic Bluetooth SDIO driver ver 0.1
5486[ 2.912795] usbcore: registered new interface driver ath3k
5487[ 2.918330] EDAC MC: ECC not enabled
5488[ 2.921962] EDAC DEVICE0: Giving out device to module edac controller cache_err: DEV edac (POLLED)
5489[ 2.930997] EDAC DEVICE1: Giving out device to module zynqmp-ocm-edac controller zynqmp_ocm: DEV ff960000.memory-controller (INTERRUPT)
5490[ 2.943291] sdhci: Secure Digital Host Controller Interface driver
5491[ 2.949381] sdhci: Copyright(c) Pierre Ossman
5492[ 2.953720] sdhci-pltfm: SDHCI platform and OF driver helper
5493[ 3.006716] mmc0: SDHCI controller on ff160000.sdhci [ff160000.sdhci] using ADMA 64-bit
5494[ 3.010719] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 330)
5495[ 3.010919] ata1.00: ATA-8: InnoDisk SATA Slim D150Q, 120925, max UDMA/133
5496[ 3.010922] ata1.00: 15649200 sectors, multi 16: LBA NCQ (depth 31/32)
5497[ 3.011145] ata1.00: configured for UDMA/133
5498[ 3.011456] scsi 0:0:0:0: Direct-Access ATA InnoDisk SATA Sl 25 PQ: 0 ANSI: 5
5499[ 3.046685] ledtrig-cpu: registered to indicate activity on CPUs
5500[ 3.052743] usbcore: registered new interface driver usbhid
5501[ 3.058229] usbhid: USB HID core driver
5502[ 3.063654] fpga_manager fpga0: Xilinx ZynqMP FPGA Manager registered
5503[ 3.070520] xilinx-dp-snd-pcm dp_snd_pcm0: Xilinx DisplayPort Sound PCM probed
5504[ 3.077683] xilinx-dp-snd-pcm dp_snd_pcm1: Xilinx DisplayPort Sound PCM probed
5505[ 3.085039] PLL: shutdown
5506[ 3.088476] Write failed to divider address:fd1a007c
5507[ 3.093515] PLL: enable
5508[ 3.096039] xilinx-dp-snd-codec dp_snd_codec0: Xilinx DisplayPort Sound Codec probed
5509[ 3.104109] xilinx-dp-snd-card dp_snd_card: xilinx-dp-snd-codec-dai <-> xilinx-dp-snd-codec-dai mapping ok
5510[ 3.113792] xilinx-dp-snd-card dp_snd_card: xilinx-dp-snd-codec-dai <-> xilinx-dp-snd-codec-dai mapping ok
5511[ 3.115181] sd 0:0:0:0: [sda] 15649200 512-byte logical blocks: (8.01 GB/7.46 GiB)
5512[ 3.115277] sd 0:0:0:0: [sda] Write Protect is off
5513[ 3.115324] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
5514[ 3.116157] sda: sda1
5515[ 3.116696] sd 0:0:0:0: [sda] Attached SCSI disk
5516[ 3.151929] xilinx-dp-snd-card dp_snd_card: Xilinx DisplayPort Sound Card probed
5517[ 3.159391] pktgen: Packet Generator for packet performance testing. Version: 2.75
5518[ 3.168831] Netfilter messages via NETLINK v0.30.
5519[ 3.173580] ip_tables: (C) 2000-2006 Netfilter Core Team
5520[ 3.178853] Initializing XFRM netlink socket
5521[ 3.183236] NET: Registered protocol family 10
5522[ 3.188078] ip6_tables: (C) 2000-2006 Netfilter Core Team
5523[ 3.193438] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver
5524[ 3.199654] NET: Registered protocol family 17
5525[ 3.204022] NET: Registered protocol family 15
5526[ 3.208447] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this.
5527[ 3.221370] Ebtables v2.0 registered
5528[ 3.224968] can: controller area network core (rev 20120528 abi 9)
5529[ 3.231126] NET: Registered protocol family 29
5530[ 3.235520] can: raw protocol (rev 20120528)
5531[ 3.239770] can: broadcast manager protocol (rev 20161123 t)
5532[ 3.245419] can: netlink gateway (rev 20130117) max_hops=1
5533[ 3.252924] Bluetooth: RFCOMM TTY layer initialized
5534[ 3.259730] Bluetooth: RFCOMM socket layer initialized
5535[ 3.264788] Bluetooth: RFCOMM ver 1.11
5536[ 3.268513] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
5537[ 3.273803] Bluetooth: BNEP filters: protocol multicast
5538[ 3.279016] Bluetooth: BNEP socket layer initialized
5539[ 3.283960] Bluetooth: HIDP (Human Interface Emulation) ver 1.2
5540[ 3.289864] Bluetooth: HIDP socket layer initialized
5541[ 3.295001] 9pnet: Installing 9P2000 support
5542[ 3.299203] Key type dns_resolver registered
5543[ 3.303838] registered taskstats version 1
5544[ 3.310226] Btrfs loaded, crc32c=crc32c-generic
5545[ 3.327943] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller
5546[ 3.333369] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 1
5547[ 3.343252] xhci-hcd xhci-hcd.0.auto: hcc params 0x0238f625 hci version 0x100 quirks 0x02010010
5548[ 3.353916] xhci-hcd xhci-hcd.0.auto: irq 229, io mem 0xfe300000
5549[ 3.361959] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
5550[ 3.370671] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
5551[ 3.379821] usb usb1: Product: xHCI Host Controller
5552[ 3.384617] usb usb1: Manufacturer: Linux 4.9.0 xhci-hcd
5553[ 3.389908] usb usb1: SerialNumber: xhci-hcd.0.auto
5554[ 3.397006] hub 1-0:1.0: USB hub found
5555[ 3.400692] hub 1-0:1.0: 1 port detected
5556[ 3.404698] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller
5557[ 3.410109] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 2
5558[ 3.417782] usb usb2: We don't know the algorithms for LPM for this host, disabling LPM.
5559[ 3.425874] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003
5560[ 3.432582] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
5561[ 3.439784] usb usb2: Product: xHCI Host Controller
5562[ 3.446652] usb usb2: Manufacturer: Linux 4.9.0 xhci-hcd
5563[ 3.453881] usb usb2: SerialNumber: xhci-hcd.0.auto
5564[ 3.458913] hub 2-0:1.0: USB hub found
5565[ 3.462586] hub 2-0:1.0: 1 port detected
5566[ 3.468892] rtc_zynqmp ffa60000.rtc: setting system clock to 1970-01-01 00:00:15 UTC (15)
5567[ 3.479109] clk: Not disabling unused clocks
5568[ 3.483293] ALSA device list:
5569[ 3.486234] #0: DisplayPort monitor
5570[ 3.490508] Freeing unused kernel memory: 448K (ffffffc000b70000 - ffffffc000be0000)
5571INIT: version 2.88 booting
5572Starting udev
5573[ 3.605615] udevd[1623]: starting version 3.2
5574[ 3.610243] random: udevd: uninitialized urandom read (16 bytes read)
5575[ 3.616682] random: udevd: uninitialized urandom read (16 bytes read)
5576[ 3.623091] random: udevd: uninitialized urandom read (16 bytes read)
5577[ 3.629484] random: udevd: uninitialized urandom read (16 bytes read)
5578[ 3.639517] udevd[1624]: starting eudev-3.2
5579[ 3.683049] random: udevd: uninitialized urandom read (16 bytes read)
5580[ 3.692704] random: udevd: uninitialized urandom read (16 bytes read)
5581[ 3.702387] 4fm: loading out-of-tree module taints kernel.
5582[ 3.712544] pci 0000:00:00.0: enabling device (0000 -> 0002)
5583[ 3.718214] 4FM 0000:01:00.0: enabling device (0000 -> 0002)
5584[ 3.722158] <dma1> init: registered
5585[ 3.727308] Accessing 47232 of total 1 entries in dev->bar
5586[ 3.732795] dev->bar[u].virt_address:cfb607c value:38011121
5587[ 3.738329] dev->bar[u].virt_address:cfb6080 value:deadbeef
5588[ 3.743861] dev->bar[u].virt_address:cfb6084 value:baadf00d
5589[ 3.749408] dev->bar[u].virt_address:cfb6088 value:eba00eba
5590[ 3.754951] dev->bar[u].virt_address:cfb608c value:beefdeaf
5591[ 3.762298] /media/yocto4/vp880/VP88x_2017_3_PRJ0191/build/tmp/work/plnx_aarch64-xilinx-linux/4fm/1.0-r0/4fm.c: found 1 devices
5592[ 3.766246] <dma2> init: registered
5593[ 4.016071] FAT-fs (sda1): Volume was not properly unmounted. Some data may be corrupt. Please run fsck.
5594Populating dev cache
5595[ 4.283141] random: dd: uninitialized urandom read (512 bytes read)
5596Thu Jul 26 08:51:43 UTC 2018
5597Starting internet superserver: inetd.
5598Running postinst /etc/rpm-postinsts/100-sysvinit-inittab...
5599update-rc.d: /etc/init.d/run-postinsts exists during rc.d purge (continuing)
5600INIT: Entering runlevel: 5
5601Hello World
5602[22]:0x12
5603[20]:0x201
5604[20]:0x201
5605[22]:0x1
5606[0]:0x140
5607[0]:0x140
5608Configuring network interfaces... [ 4.583100] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
5609done.
5610Starting Dropbear SSH server: [ 4.611822] random: dropbearkey: uninitialized urandom read (32 bytes read)
5611[ 4.621843] random: dropbearkey: uninitialized urandom read (32 bytes read)
5612Generating key, this may take a while...
5613[ 5.618826] macb ff0c0000.ethernet eth0: link up (1000/Full)
5614[ 5.624430] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
5615[ 5.953948] random: dropbearkey: uninitialized urandom read (32 bytes read)
5616Public key portion is:
5617ssh-rsa AAAAB3NzaC1yc2EAAAADAQABAAABAQCYpDFtnpQnJ10InGM5VllnTXDseI+Axk4ldiB1R7ZpX1HeKgSx+QSMIpNjZPNGL7nCl1tiuck8+iS4nA3R7Ddrc6oaJDhljsnm3pyFM2q8Ad3ThEzKAt/DNb1iehhncRapRpJpESeMhXrqqWU3FxGkmqBXpWWVAvClnzcwrW6NjrFp3NiTIPLDfhLaOrORN4xm/sYRPnumVMqj2RKZHwuWvZaycigSQ/6NvcVm4q7oWT/NnI7oZEgGO7EX0aQPeY/IDNMtTKJfZU6qIdYOY1M5Yy3j2upUh7TFlcAzlu6+EAdQiBkVs6ZABtmQqhCIEMlJyYZxi9b2beGmpgb/gvnb root@VP88x_2017_3_PRJ0191
5618Fingerprint: md5 11:d9:44:ae:8d:9c:4f:4d:49:cc:ed:55:c6:9[ 6.006926] random: fast init done
56193:d0:90
5620dropbear.
5621Starting syslogd/klogd: done
5622[ 6.456854] random: crng init done
5623[ 8.248403] jffs2: notice: (2115) jffs2_build_xattr_subsystem: complete building xattr subsystem, 0 of xdatum (0 unchecked, 0 orphan) and 0 of xref (0 dead, 0 orphan) found.
5624hello world.....
5625Starting tcf-agent: OK
5626
5627root@VP88x_2017_3_PRJ0191:~# Fmc134APP 0 1 1 1 1
5628UnitAPI version : 1.3.8 : Enumerating units in the system, please wait...
5629
5630Global Units:
5631Global Unit 0 is on Device 'VP880' (P0): Internal Unit 0 is star 0x01C4 (axi_vp880_8l_host_if) with index 1 of star type 0x000D (Host Interface)
5632Global Unit 1 is on Device 'VP880' (P0): Internal Unit 1 is star 0x0203 (Unknown) with index 0 of star type 0x0005 (ADC)
5633Global Unit 2 is on Device 'VP880' (P0): Internal Unit 2 is star 0x015C (axi_intrc16) with index 0 of star type 0x0014 (Interrupt Controller)
5634Global Unit 3 is on Device 'VP880' (P0): Internal Unit 3 is star 0x014C (axi_i2c_master) with index 0 of star type 0x000E (3rd Party Logic)
5635Global Unit 4 is on Device 'VP880' (P0): Internal Unit 4 is star 0x0202 (Unknown) with index 0 of star type 0x0003 (Memory FIFO)
5636Global Unit 5 is on Device 'VP880' (P0): Internal Unit 5 is star 0x01C5 (axi_vp880_ddr4_fifo) with index 0 of star type 0x0003 (Memory FIFO)
5637
5638
5639Running 'VP880-FMC134' on PCIe, CID725
5640
5641-----------------------------------------------------------
5642Device 'VP880' (P0)
5643-----------------------------------------------------------
5644Constellation ID : 759
5645Number Of Stars : 19
5646Software Build Code: 1524177589 (Thu Apr 19 22:39:49 2018)
5647Firmware Build Code: 0
5648Firmware Revision : 1.2
5649-----------------------------------------------------------
5650
5651 - Unit 0 is VP88x host interface star
5652
5653-------- Onboard Monitoring (ADC Monitor) ---------
5654Temp ( AD7291 ) : OK (53.50C)
5655Vin0 ( ADC0 1.1Va ) : OK ( 1.13V)
5656Vin1 ( ADC0 1.1Vdig ) : OK ( 1.12V)
5657Vin2 ( ADC0 1.9Va ) : OK ( 1.92V)
5658Vin3 ( ADC1 1.1Va ) : OK ( 1.14V)
5659Vin4 ( ADC1 1.1Vdig ) : OK ( 1.13V)
5660Vin5 ( ADC1 1.9Va ) : OK ( 1.92V)
5661
5662Vin6 ( ADC0 raw ) : OK (0.682V)
5663Vin6 ( ADC0 Temp ) : OK (67.27C)
5664
5665Vin7 ( ADC1 raw ) : OK (0.684V)
5666Vin7 ( ADC1 Temp ) : OK (66.50C)
5667---------------------------------------------------
5668
5669
5670-------- Onboard Monitoring (Voltage Monitor) ---------
5671Temp ( AD7291 ) : OK (52.50C)
5672Vin0 ( 5.5Vosc ) : OK ( 5.50V)
5673Vin1 ( 3.3Vclk ) : OK ( 3.25V)
5674Vin2 ( 3.3Vlmx ) : OK ( 3.30V)
5675Vin3 ( 1.8Vcpld ) : OK ( 1.80V)
5676Vin4 ( Vadj ) : OK ( 1.81V)
5677Vin5 ( 3.3Vfmc ) : OK ( 3.25V)
5678Vin6 ( 12.0Vfmc ) : OK (11.96V)
5679Vin7 ( Viob ) : OK ( 1.81V)
5680-------------------------------------------------------
5681
5682Configuring clock tree ...
5683
5684
5685 Setting Clock_Mode
5686Internal Reference Mode
5687Xilinx Zynq MP First Stage Boot Loader
5688Release 2017.3 May 24 2018 - 10:35:53
5689Marvell PHY reset
5690SI5338 0x70 not configured
5691SI5338 0x70 configuration finished
5692SI5338 0x71 not configured
5693SI5338 0x71 configuration finished
5694Xilinx Zynq MP First Stage Boot Loader
5695Release 2017.3 May 24 2018 - 10:35:53
5696Marvell PHY reset
5697SI5338 0x70 not configured
5698SI5338 0x70 configuration finished
5699SI5338 0x71 not configured
5700SI5338 0x71 configuration finished
5701
5702
5703U-Boot 2017.01 (Jul 26 2018 - 02:50:11 -0600) Xilinx ZynqMP ZCU102 revB
5704
5705I2C: ready
5706DRAM: 2 GiB
5707EL Level: EL2
5708Chip ID: xczu3eg
5709MMC: Card did not respond to voltage select!
5710sdhci@ff160000 - probe failed: -95
5711Card did not respond to voltage select!
5712
5713zynqmp_qspi_ofdata_to_platdata: CLK 300000000
5714SF: Detected n25q1024 with page size 256 Bytes, erase size 64 KiB, total 128 MiB
5715*** Warning - bad CRC, using default environment
5716
5717In: serial
5718Out: serial
5719Err: serial
5720Bootmode: QSPI_MODE
5721Net: ZYNQ GEM: ff0c0000, phyaddr c, interface rgmii-id
5722eth0: ethernet@ff0c0000
5723U-BOOT for VP88x_2017_3_PRJ0191
5724
5725Hit any key to stop autoboot: 0
5726SF: Detected n25q1024 with page size 256 Bytes, erase size 64 KiB, total 128 MiB
5727device 0 offset 0x540000, size 0x2200000
5728SF: 35651584 bytes @ 0x540000 Read: OK
5729## Loading kernel from FIT Image at 10000000 ...
5730 Using 'conf@1' configuration
5731 Trying 'kernel@0' kernel subimage
5732 Description: Linux Kernel
5733 Type: Kernel Image
5734 Compression: uncompressed
5735 Data Start: 0x100000d8
5736 Data Size: 12503552 Bytes = 11.9 MiB
5737 Architecture: AArch64
5738 OS: Linux
5739 Load Address: 0x00080000
5740 Entry Point: 0x00080000
5741 Hash algo: sha1
5742 Hash value: 6738559f9c7602fa2a0ff36fdfc8cf5b9b3e6565
5743 Verifying Hash Integrity ... sha1+ OK
5744## Loading ramdisk from FIT Image at 10000000 ...
5745 Using 'conf@1' configuration
5746 Trying 'ramdisk@0' ramdisk subimage
5747 Description: ramdisk
5748 Type: RAMDisk Image
5749 Compression: uncompressed
5750 Data Start: 0x10bf54e4
5751 Data Size: 8973721 Bytes = 8.6 MiB
5752 Architecture: AArch64
5753 OS: Linux
5754 Load Address: unavailable
5755 Entry Point: unavailable
5756 Hash algo: sha1
5757 Hash value: 4b595c4e0c42ac8967d3d732b389c6521f0b492f
5758 Verifying Hash Integrity ... sha1+ OK
5759## Loading fdt from FIT Image at 10000000 ...
5760 Using 'conf@1' configuration
5761 Trying 'fdt@0' fdt subimage
5762 Description: Flattened Device Tree blob
5763 Type: Flat Device Tree
5764 Compression: uncompressed
5765 Data Start: 0x10becbd0
5766 Data Size: 34910 Bytes = 34.1 KiB
5767 Architecture: AArch64
5768 Hash algo: sha1
5769 Hash value: 20fc450d3d82f1967aba254f93c3704b6f5d1f6e
5770 Verifying Hash Integrity ... sha1+ OK
5771 Booting using the fdt blob at 0x10becbd0
5772 Loading Kernel Image ... OK
5773 Loading Ramdisk to 07771000, end 07fffd99 ... OK
5774 Loading Device Tree to 0000000007765000, end 000000000777085d ... OK
5775
5776Starting kernel ...
5777
5778[ 0.000000] Booting Linux on physical CPU 0x0
5779[ 0.000000] Linux version 4.9.0 (user@user-VirtualBox) (gcc version 6.2.1 20161016 (Linaro GCC 6.2-2016.11) ) #1 SMP Thu Jul 26 01:50:46 MDT 2018
5780[ 0.000000] Boot CPU: AArch64 Processor [410fd034]
5781[ 0.000000] earlycon: cdns0 at MMIO 0x00000000ff010000 (options '115200n8')
5782[ 0.000000] bootconsole [cdns0] enabled
5783[ 0.000000] efi: Getting EFI parameters from FDT:
5784[ 0.000000] efi: UEFI not found.
5785[ 0.000000] cma: Reserved 512 MiB at 0x0000000060000000
5786[ 0.000000] psci: probing for conduit method from DT.
5787[ 0.000000] psci: PSCIv1.0 detected in firmware.
5788[ 0.000000] psci: Using standard PSCI v0.2 function IDs
5789[ 0.000000] psci: MIGRATE_INFO_TYPE not supported.
5790[ 0.000000] percpu: Embedded 21 pages/cpu @ffffffc05ff76000 s46232 r8192 d31592 u86016
5791[ 0.000000] Detected VIPT I-cache on CPU0
5792[ 0.000000] CPU features: enabling workaround for ARM erratum 845719
5793[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 517120
5794[ 0.000000] Kernel command line: console=ttyPS0,115200 earlyprintk earlycon=cdns,mmio,0xFF010000,115200n8 uio_pdrv_genirq.of_id=generic-uio clk_ignore_unused cma=512M coherent_pool=64MiB
5795[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
5796[ 0.000000] Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes)
5797[ 0.000000] Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes)
5798[ 0.000000] Memory: 1519128K/2097152K available (8508K kernel code, 562K rwdata, 2636K rodata, 448K init, 382K bss, 53736K reserved, 524288K cma-reserved)
5799[ 0.000000] Virtual kernel memory layout:
5800[ 0.000000] modules : 0xffffff8000000000 - 0xffffff8008000000 ( 128 MB)
5801[ 0.000000] vmalloc : 0xffffff8008000000 - 0xffffffbebfff0000 ( 250 GB)
5802[ 0.000000] .text : 0xffffff8008080000 - 0xffffff80088d0000 ( 8512 KB)
5803[ 0.000000] .rodata : 0xffffff80088d0000 - 0xffffff8008b70000 ( 2688 KB)
5804[ 0.000000] .init : 0xffffff8008b70000 - 0xffffff8008be0000 ( 448 KB)
5805[ 0.000000] .data : 0xffffff8008be0000 - 0xffffff8008c6ca00 ( 563 KB)
5806[ 0.000000] .bss : 0xffffff8008c6ca00 - 0xffffff8008ccc434 ( 383 KB)
5807[ 0.000000] fixed : 0xffffffbefe7fd000 - 0xffffffbefec00000 ( 4108 KB)
5808[ 0.000000] PCI I/O : 0xffffffbefee00000 - 0xffffffbeffe00000 ( 16 MB)
5809[ 0.000000] vmemmap : 0xffffffbf00000000 - 0xffffffc000000000 ( 4 GB maximum)
5810[ 0.000000] 0xffffffbf00000000 - 0xffffffbf01c00000 ( 28 MB actual)
5811[ 0.000000] memory : 0xffffffc000000000 - 0xffffffc080000000 ( 2048 MB)
5812[ 0.000000] Hierarchical RCU implementation.
5813[ 0.000000] Build-time adjustment of leaf fanout to 64.
5814[ 0.000000] RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=4.
5815[ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=64, nr_cpu_ids=4
5816[ 0.000000] NR_IRQS:64 nr_irqs:64 0
5817[ 0.000000] GIC: Adjusting CPU interface base to 0x00000000f902f000
5818[ 0.000000] GIC: Using split EOI/Deactivate mode
5819[ 0.000000] arm_arch_timer: Architected cp15 timer(s) running at 50.00MHz (phys).
5820[ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0xb8812736b, max_idle_ns: 440795202655 ns
5821[ 0.000003] sched_clock: 56 bits at 50MHz, resolution 20ns, wraps every 4398046511100ns
5822[ 0.008261] Console: colour dummy device 80x25
5823[ 0.012527] Calibrating delay loop (skipped), value calculated using timer frequency.. 100.00 BogoMIPS (lpj=200000)
5824[ 0.022886] pid_max: default: 32768 minimum: 301
5825[ 0.027580] Mount-cache hash table entries: 4096 (order: 3, 32768 bytes)
5826[ 0.034138] Mountpoint-cache hash table entries: 4096 (order: 3, 32768 bytes)
5827[ 0.041866] ASID allocator initialised with 65536 entries
5828[ 0.047560] zynqmp_plat_init Power management API v0.3
5829[ 0.052578] EFI services will not be available.
5830[ 0.057343] Detected VIPT I-cache on CPU1
5831[ 0.057377] CPU1: Booted secondary processor [410fd034]
5832[ 0.057639] Detected VIPT I-cache on CPU2
5833[ 0.057655] CPU2: Booted secondary processor [410fd034]
5834[ 0.057907] Detected VIPT I-cache on CPU3
5835[ 0.057923] CPU3: Booted secondary processor [410fd034]
5836[ 0.057956] Brought up 4 CPUs
5837[ 0.088237] SMP: Total of 4 processors activated.
5838[ 0.092913] CPU features: detected feature: 32-bit EL0 Support
5839[ 0.098710] CPU: All CPU(s) started at EL2
5840[ 0.102783] alternatives: patching kernel code
5841[ 0.108042] devtmpfs: initialized
5842[ 0.115566] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
5843[ 0.136574] xor: measuring software checksum speed
5844[ 0.181245] 8regs : 2543.000 MB/sec
5845[ 0.221270] 8regs_prefetch: 2266.000 MB/sec
5846[ 0.265638] 32regs : 3125.000 MB/sec
5847[ 0.305665] 32regs_prefetch: 2627.000 MB/sec
5848[ 0.310087] xor: using function: 32regs (3125.000 MB/sec)
5849[ 0.315543] pinctrl core: initialized pinctrl subsystem
5850[ 0.321224] NET: Registered protocol family 16
5851[ 0.326322] Failed to initialise IOMMU /amba/smmu@fd800000
5852[ 0.331828] vdso: 2 pages (1 code @ ffffff80088d7000, 1 data @ ffffff8008be4000)
5853[ 0.339031] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers.
5854[ 0.374347] DMA: preallocated 65536 KiB pool for atomic allocations
5855[ 0.390740] reset_zynqmp reset-controller: Xilinx zynqmp reset driver probed
5856[ 0.398220] ARM CCI_400_r1 PMU driver probed[ 0.405002] zynqmp-pinctrl ff180000.pinctrl: zynqmp pinctrl initialized
5857[ 0.435709] HugeTLB registered 2 MB page size, pre-allocated 0 pages
5858[ 0.508900] raid6: int64x1 gen() 447 MB/s
5859[ 0.580917] raid6: int64x1 xor() 486 MB/s
5860[ 0.652962] raid6: int64x2 gen() 741 MB/s
5861[ 0.725010] raid6: int64x2 xor() 661 MB/s
5862[ 0.797056] raid6: int64x4 gen() 1086 MB/s
5863[ 0.869081] raid6: int64x4 xor() 810 MB/s
5864[ 0.941150] raid6: int64x8 gen() 1266 MB/s
5865[ 1.013183] raid6: int64x8 xor() 824 MB/s
5866[ 1.085239] raid6: neonx1 gen() 797 MB/s
5867[ 1.157257] raid6: neonx1 xor() 837 MB/s
5868[ 1.229325] raid6: neonx2 gen() 1286 MB/s
5869[ 1.301332] raid6: neonx2 xor() 1143 MB/s
5870[ 1.373384] raid6: neonx4 gen() 1665 MB/s
5871[ 1.445417] raid6: neonx4 xor() 1300 MB/s
5872[ 1.517479] raid6: neonx8 gen() 1752 MB/s
5873[ 1.589499] raid6: neonx8 xor() 1348 MB/s
5874[ 1.593574] raid6: using algorithm neonx8 gen() 1752 MB/s
5875[ 1.598936] raid6: .... xor() 1348 MB/s, rmw enabled
5876[ 1.603866] raid6: using intx1 recovery algorithm
5877[ 1.609024] Write failed gate address:1000f02
5878[ 1.616995] SCSI subsystem initialized
5879[ 1.620774] usbcore: registered new interface driver usbfs
5880[ 1.626106] usbcore: registered new interface driver hub
5881[ 1.631383] usbcore: registered new device driver usb
5882[ 1.636434] media: Linux media interface: v0.10
5883[ 1.640880] Linux video capture interface: v2.00
5884[ 1.645464] pps_core: LinuxPPS API ver. 1 registered
5885[ 1.650370] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
5886[ 1.659462] PTP clock support registered
5887[ 1.663364] EDAC MC: Ver: 3.0.0
5888[ 1.666727] FPGA manager framework
5889[ 1.670069] fpga-region fpga-full: FPGA Region probed
5890[ 1.675081] Advanced Linux Sound Architecture Driver Initialized.
5891[ 1.681332] Bluetooth: Core ver 2.22
5892[ 1.684742] NET: Registered protocol family 31
5893[ 1.689131] Bluetooth: HCI device and connection manager initialized
5894[ 1.695450] Bluetooth: HCI socket layer initialized
5895[ 1.700292] Bluetooth: L2CAP socket layer initialized
5896[ 1.705317] Bluetooth: SCO socket layer initialized
5897[ 1.710718] clocksource: Switched to clocksource arch_sys_counter
5898[ 1.716719] VFS: Disk quotas dquot_6.6.0
5899[ 1.720549] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
5900[ 1.730811] NET: Registered protocol family 2
5901[ 1.735370] TCP established hash table entries: 16384 (order: 5, 131072 bytes)
5902[ 1.742488] TCP bind hash table entries: 16384 (order: 6, 262144 bytes)
5903[ 1.749271] TCP: Hash tables configured (established 16384 bind 16384)
5904[ 1.755670] UDP hash table entries: 1024 (order: 3, 32768 bytes)
5905[ 1.761603] UDP-Lite hash table entries: 1024 (order: 3, 32768 bytes)
5906[ 1.768109] NET: Registered protocol family 1
5907[ 1.772610] RPC: Registered named UNIX socket transport module.
5908[ 1.778335] RPC: Registered udp transport module.
5909[ 1.783003] RPC: Registered tcp transport module.
5910[ 1.787672] RPC: Registered tcp NFSv4.1 backchannel transport module.
5911[ 1.794231] Trying to unpack rootfs image as initramfs...
5912[ 2.117722] Freeing initrd memory: 8760K (ffffffc007771000 - ffffffc007fff000)
5913[ 2.125144] hw perfevents: enabled with armv8_pmuv3 PMU driver, 7 counters available
5914[ 2.133456] futex hash table entries: 1024 (order: 5, 131072 bytes)
5915[ 2.140124] workingset: timestamp_bits=62 max_order=19 bucket_order=0
5916[ 2.147068] NFS: Registering the id_resolver key type
5917[ 2.151944] Key type id_resolver registered
5918[ 2.156076] Key type id_legacy registered
5919[ 2.160062] nfs4filelayout_init: NFSv4 File Layout Driver Registering...
5920[ 2.166732] ntfs: driver 2.1.32 [Flags: R/W].
5921[ 2.171061] jffs2: version 2.2. (NAND) (SUMMARY) © 2001-2006 Red Hat, Inc.
5922[ 2.185709] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 247)
5923[ 2.192917] io scheduler noop registered
5924[ 2.196805] io scheduler deadline registered
5925[ 2.201046] io scheduler cfq registered (default)
5926[ 2.206302] nwl-pcie fd0e0000.pcie: Link is UP
5927[ 2.210591] OF: PCI: host bridge /amba/pcie@fd0e0000 ranges:
5928[ 2.216193] OF: PCI: MEM 0xe0000000..0xefffffff -> 0xe0000000
5929[ 2.222061] OF: PCI: MEM 0x600000000..0x7ffffffff -> 0x600000000
5930[ 2.228282] nwl-pcie fd0e0000.pcie: PCI host bridge to bus 0000:00
5931[ 2.234348] pci_bus 0000:00: root bus resource [bus 00-ff]
5932[ 2.239792] pci_bus 0000:00: root bus resource [mem 0xe0000000-0xefffffff]
5933[ 2.246625] pci_bus 0000:00: root bus resource [mem 0x600000000-0x7ffffffff pref]
5934[ 2.254561] pci 0000:00:00.0: BAR 8: assigned [mem 0xe0000000-0xe00fffff]
5935[ 2.261153] pci 0000:01:00.0: BAR 0: assigned [mem 0xe0000000-0xe00007ff]
5936[ 2.267901] pci 0000:00:00.0: PCI bridge to [bus 01-0c]
5937[ 2.273088] pci 0000:00:00.0: bridge window [mem 0xe0000000-0xe00fffff]
5938[ 2.280564] xilinx-dpdma fd4c0000.dma: Xilinx DPDMA engine is probed
5939[ 2.286931] xilinx-vdma 400000000.dma: Xilinx AXI VDMA Engine Driver Probed!!
5940[ 2.293981] xilinx-vdma 400010000.dma: Xilinx AXI VDMA Engine Driver Probed!!
5941[ 2.301134] xilinx-zynqmp-dma fd500000.dma: ZynqMP DMA driver Probe success
5942[ 2.307991] xilinx-zynqmp-dma fd510000.dma: ZynqMP DMA driver Probe success
5943[ 2.314912] xilinx-zynqmp-dma fd520000.dma: ZynqMP DMA driver Probe success
5944[ 2.321830] xilinx-zynqmp-dma fd530000.dma: ZynqMP DMA driver Probe success
5945[ 2.328754] xilinx-zynqmp-dma fd540000.dma: ZynqMP DMA driver Probe success
5946[ 2.335673] xilinx-zynqmp-dma fd550000.dma: ZynqMP DMA driver Probe success
5947[ 2.342590] xilinx-zynqmp-dma fd560000.dma: ZynqMP DMA driver Probe success
5948[ 2.349513] xilinx-zynqmp-dma fd570000.dma: ZynqMP DMA driver Probe success
5949[ 2.356469] xilinx-zynqmp-dma ffa80000.dma: ZynqMP DMA driver Probe success
5950[ 2.363353] xilinx-zynqmp-dma ffa90000.dma: ZynqMP DMA driver Probe success
5951[ 2.370271] xilinx-zynqmp-dma ffaa0000.dma: ZynqMP DMA driver Probe success
5952[ 2.377193] xilinx-zynqmp-dma ffab0000.dma: ZynqMP DMA driver Probe success
5953[ 2.384112] xilinx-zynqmp-dma ffac0000.dma: ZynqMP DMA driver Probe success
5954[ 2.391032] xilinx-zynqmp-dma ffad0000.dma: ZynqMP DMA driver Probe success
5955[ 2.397961] xilinx-zynqmp-dma ffae0000.dma: ZynqMP DMA driver Probe success
5956[ 2.404875] xilinx-zynqmp-dma ffaf0000.dma: ZynqMP DMA driver Probe success
5957[ 2.433081] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
5958[ 2.440560] ff000000.serial: ttyPS1 at MMIO 0xff000000 (irq = 46, base_baud = 6250000) is a xuartps
5959[ 2.449621] ff010000.serial: ttyPS0 at MMIO 0xff010000 (irq = 47, base_baud =·r¢ªÂª²ºêconsole [ttyPS0] enabled
5960[ 2.458567] console [ttyPS0] enabled
5961[ 2.465533] bootconsole [cdns0] disabled
5962[ 2.465533] bootconsole [cdns0] disabled
5963[ 2.473611] Unable to detect cache hierarchy from DT for CPU 0
5964[ 2.484138] brd: module loaded
5965[ 2.489939] loop: module loaded
5966[ 2.493920] ahci-ceva fd0c0000.ahci: AHCI 0001.0301 32 slots 2 ports 6 Gbps 0x3 impl platform mode
5967[ 2.502804] ahci-ceva fd0c0000.ahci: flags: 64bit ncq sntf pm clo only pmp fbs pio slum part ccc sds apst
5968[ 2.513561] scsi host0: ahci-ceva
5969[ 2.516975] scsi host1: ahci-ceva
5970[ 2.520318] ata1: SATA max UDMA/133 mmio [mem 0xfd0c0000-0xfd0c1fff] port 0x100 irq 43
5971[ 2.528150] ata2: SATA max UDMA/133 mmio [mem 0xfd0c0000-0xfd0c1fff] port 0x180 irq 43
5972[ 2.536204] mtdoops: mtd device (mtddev=name/number) must be supplied
5973[ 2.543534] zynqmp-qspi ff0f0000.spi: rx bus width not found
5974[ 2.549461] m25p80 spi0.0: found n25q00, expected n25q512a
5975[ 2.555156] m25p80 spi0.0: n25q00 (131072 Kbytes)
5976[ 2.559790] 5 ofpart partitions found on MTD device spi0.0
5977[ 2.565238] Creating 5 MTD partitions on "spi0.0":
5978[ 2.570015] 0x000000000000-0x000000500000 : "boot"
5979[ 2.575290] 0x000000500000-0x000000540000 : "bootenv"
5980[ 2.580667] 0x000000540000-0x000002740000 : "kernel"
5981[ 2.585951] 0x000002740000-0x000003740000 : "user"
5982[ 2.591075] 0x000003740000-0x000003750000 : "test"
5983[ 2.596965] libphy: Fixed MDIO Bus: probed
5984[ 2.602136] tun: Universal TUN/TAP device driver, 1.6
5985[ 2.607114] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
5986[ 2.613394] CAN device driver interface
5987[ 2.617735] macb ff0c0000.ethernet: Not enabling partial store and forward
5988[ 2.625036] libphy: MACB_mii_bus: probed
5989[ 2.702992] macb ff0c0000.ethernet eth0: Cadence GEM rev 0x50070106 at 0xff0c0000 irq 30 (00:0a:35:00:22:01)
5990[ 2.712735] Marvell 88E1510 ff0c0000.etherne:00: attached PHY driver [Marvell 88E1510] (mii_bus:phy_addr=ff0c0000.etherne:00, irq=-1)
5991[ 2.725334] usbcore: registered new interface driver asix
5992[ 2.730698] usbcore: registered new interface driver ax88179_178a
5993[ 2.736745] usbcore: registered new interface driver cdc_ether
5994[ 2.742560] usbcore: registered new interface driver net1080
5995[ 2.748206] usbcore: registered new interface driver cdc_subset
5996[ 2.754104] usbcore: registered new interface driver zaurus
5997[ 2.759673] usbcore: registered new interface driver cdc_ncm
5998[ 2.765627] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
5999[ 2.772067] ehci-pci: EHCI PCI platform driver
6000[ 2.776717] usbcore: registered new interface driver uas
6001[ 2.781977] usbcore: registered new interface driver usb-storage
6002[ 2.788228] mousedev: PS/2 mouse device common for all mice
6003[ 2.794120] rtc_zynqmp ffa60000.rtc: rtc core: registered ffa60000.rtc as rtc0
6004[ 2.801289] i2c /dev entries driver
6005[ 2.804919] cdns-i2c ff020000.i2c: 400 kHz mmio ff020000 irq 32
6006[ 2.810968] cdns-i2c ff030000.i2c: 400 kHz mmio ff030000 irq 33
6007[ 2.817737] usbcore: registered new interface driver uvcvideo
6008[ 2.823401] USB Video Class driver (1.1.1)
6009[ 2.827834] Bluetooth: HCI UART driver ver 2.3
6010[ 2.832196] Bluetooth: HCI UART protocol H4 registered
6011[ 2.837313] Bluetooth: HCI UART protocol BCSP registered
6012[ 2.842608] Bluetooth: HCI UART protocol LL registered
6013[ 2.847728] Bluetooth: HCI UART protocol ATH3K registered
6014[ 2.853110] Bluetooth: HCI UART protocol Three-wire (H5) registered
6015[ 2.854424] ata2: SATA link down (SStatus 0 SControl 330)
6016[ 2.856888] ata1: SATA link down (SStatus 0 SControl 330)
6017[ 2.870160] Bluetooth: HCI UART protocol Intel registered
6018[ 2.875540] Bluetooth: HCI UART protocol Broadcom registered
6019[ 2.881147] Bluetooth: HCI UART protocol QCA registered
6020[ 2.886390] usbcore: registered new interface driver bcm203x
6021[ 2.892030] usbcore: registered new interface driver bpa10x
6022[ 2.897583] usbcore: registered new interface driver bfusb
6023[ 2.903051] usbcore: registered new interface driver btusb
6024[ 2.908489] Bluetooth: Generic Bluetooth SDIO driver ver 0.1
6025[ 2.914184] usbcore: registered new interface driver ath3k
6026[ 2.919717] EDAC MC: ECC not enabled
6027[ 2.923348] EDAC DEVICE0: Giving out device to module edac controller cache_err: DEV edac (POLLED)
6028[ 2.932382] EDAC DEVICE1: Giving out device to module zynqmp-ocm-edac controller zynqmp_ocm: DEV ff960000.memory-controller (INTERRUPT)
6029[ 2.944674] sdhci: Secure Digital Host Controller Interface driver
6030[ 2.950769] sdhci: Copyright(c) Pierre Ossman
6031[ 2.955108] sdhci-pltfm: SDHCI platform and OF driver helper
6032[ 3.006728] mmc0: SDHCI controller on ff160000.sdhci [ff160000.sdhci] using ADMA 64-bit
6033[ 3.014846] ledtrig-cpu: registered to indicate activity on CPUs
6034[ 3.020891] usbcore: registered new interface driver usbhid
6035[ 3.026373] usbhid: USB HID core driver
6036[ 3.031776] fpga_manager fpga0: Xilinx ZynqMP FPGA Manager registered
6037[ 3.038666] xilinx-dp-snd-pcm dp_snd_pcm0: Xilinx DisplayPort Sound PCM probed
6038[ 3.045835] xilinx-dp-snd-pcm dp_snd_pcm1: Xilinx DisplayPort Sound PCM probed
6039[ 3.053177] PLL: shutdown
6040[ 3.056607] Write failed to divider address:fd1a007c
6041[ 3.061640] PLL: enable
6042[ 3.064165] xilinx-dp-snd-codec dp_snd_codec0: Xilinx DisplayPort Sound Codec probed
6043[ 3.072208] xilinx-dp-snd-card dp_snd_card: xilinx-dp-snd-codec-dai <-> xilinx-dp-snd-codec-dai mapping ok
6044[ 3.081882] xilinx-dp-snd-card dp_snd_card: xilinx-dp-snd-codec-dai <-> xilinx-dp-snd-codec-dai mapping ok
6045[ 3.091725] xilinx-dp-snd-card dp_snd_card: Xilinx DisplayPort Sound Card probed
6046[ 3.099154] pktgen: Packet Generator for packet performance testing. Version: 2.75
6047[ 3.109602] Netfilter messages via NETLINK v0.30.
6048[ 3.114356] ip_tables: (C) 2000-2006 Netfilter Core Team
6049[ 3.119629] Initializing XFRM netlink socket
6050[ 3.124829] NET: Registered protocol family 10
6051[ 3.129660] ip6_tables: (C) 2000-2006 Netfilter Core Team
6052[ 3.135022] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver
6053[ 3.141242] NET: Registered protocol family 17
6054[ 3.145612] NET: Registered protocol family 15
6055[ 3.150041] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this.
6056[ 3.162963] Ebtables v2.0 registered
6057[ 3.166567] can: controller area network core (rev 20120528 abi 9)
6058[ 3.172720] NET: Registered protocol family 29
6059[ 3.177113] can: raw protocol (rev 20120528)
6060[ 3.181362] can: broadcast manager protocol (rev 20161123 t)
6061[ 3.187006] can: netlink gateway (rev 20130117) max_hops=1
6062[ 3.194521] Bluetooth: RFCOMM TTY layer initialized
6063[ 3.201326] Bluetooth: RFCOMM socket layer initialized
6064[ 3.206392] Bluetooth: RFCOMM ver 1.11
6065[ 3.212123] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
6066[ 3.217352] Bluetooth: BNEP filters: protocol multicast
6067[ 3.222561] Bluetooth: BNEP socket layer initialized
6068[ 3.227505] Bluetooth: HIDP (Human Interface Emulation) ver 1.2
6069[ 3.233410] Bluetooth: HIDP socket layer initialized
6070[ 3.238532] 9pnet: Installing 9P2000 support
6071[ 3.242729] Key type dns_resolver registered
6072[ 3.247373] registered taskstats version 1
6073[ 3.251957] Btrfs loaded, crc32c=crc32c-generic
6074[ 3.265140] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller
6075[ 3.270566] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 1
6076[ 3.278436] xhci-hcd xhci-hcd.0.auto: hcc params 0x0238f625 hci version 0x100 quirks 0x02010010
6077[ 3.287091] xhci-hcd xhci-hcd.0.auto: irq 229, io mem 0xfe300000
6078[ 3.293161] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
6079[ 3.299866] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
6080[ 3.307068] usb usb1: Product: xHCI Host Controller
6081[ 3.311926] usb usb1: Manufacturer: Linux 4.9.0 xhci-hcd
6082[ 3.317225] usb usb1: SerialNumber: xhci-hcd.0.auto
6083[ 3.322401] hub 1-0:1.0: USB hub found
6084[ 3.326087] hub 1-0:1.0: 1 port detected
6085[ 3.330090] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller
6086[ 3.335491] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 2
6087[ 3.343166] usb usb2: We don't know the algorithms for LPM for this host, disabling LPM.
6088[ 3.351259] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003
6089[ 3.357968] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
6090[ 3.365170] usb usb2: Product: xHCI Host Controller
6091[ 3.370030] usb usb2: Manufacturer: Linux 4.9.0 xhci-hcd
6092[ 3.375325] usb usb2: SerialNumber: xhci-hcd.0.auto
6093[ 3.380393] hub 2-0:1.0: USB hub found
6094[ 3.384075] hub 2-0:1.0: 1 port detected
6095[ 3.388358] rtc_zynqmp ffa60000.rtc: setting system clock to 1970-01-01 00:00:15 UTC (15)
6096[ 3.396557] clk: Not disabling unused clocks
6097[ 3.400744] ALSA device list:
6098[ 3.403692] #0: DisplayPort monitor
6099[ 3.407960] Freeing unused kernel memory: 448K (ffffffc000b70000 - ffffffc000be0000)
6100INIT: version 2.88 booting
6101Starting udev
6102[ 3.520933] udevd[1613]: starting version 3.2
6103[ 3.525582] random: udevd: uninitialized urandom read (16 bytes read)
6104[ 3.532018] random: udevd: uninitialized urandom read (16 bytes read)
6105[ 3.538437] random: udevd: uninitialized urandom read (16 bytes read)
6106[ 3.544917] random: udevd: uninitialized urandom read (16 bytes read)
6107[ 3.554997] udevd[1614]: starting eudev-3.2
6108[ 3.599391] random: udevd: uninitialized urandom read (16 bytes read)
6109[ 3.607743] random: udevd: uninitialized urandom read (16 bytes read)
6110[ 3.610076] 4fm: loading out-of-tree module taints kernel.
6111[ 3.610928] pci 0000:00:00.0: enabling device (0000 -> 0002)
6112[ 3.610940] 4FM 0000:01:00.0: enabling device (0000 -> 0002)
6113[ 3.610949] Accessing 47232 of total 1 entries in dev->bar
6114[ 3.610974] dev->bar[u].virt_address:cf3d07c value:38011121
6115[ 3.610976] dev->bar[u].virt_address:cf3d080 value:deadbeef
6116[ 3.610979] dev->bar[u].virt_address:cf3d084 value:baadf00d
6117[ 3.610981] dev->bar[u].virt_address:cf3d088 value:eba00eba
6118[ 3.610983] dev->bar[u].virt_address:cf3d08c value:beefdeaf
6119[ 3.612011] /media/yocto4/vp880/VP88x_2017_3_PRJ0191/build/tmp/work/plnx_aarch64-xilinx-linux/4fm/1.0-r0/4fm.c: found 1 devices
6120[ 3.695038] <dma1> init: registered
6121[ 3.708578] <dma2> init: registered
6122Populating dev cache
6123[ 4.184381] random: dd: uninitialized urandom read (512 bytes read)
6124Thu Jul 26 08:51:43 UTC 2018
6125Starting internet superserver: inetd.
6126Running postinst /etc/rpm-postinsts/100-sysvinit-inittab...
6127update-rc.d: /etc/init.d/run-postinsts exists during rc.d purge (continuing)
6128INIT: Entering runlevel: 5
6129Hello World
6130[22]:0x12
6131[20]:0x201
6132[20]:0x201
6133[22]:0x1
6134[0]:0x140
6135[0]:0x140
6136Configuring network interfaces... [ 4.484284] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
6137done.
6138Starting Dropbear SSH server: [ 4.512784] random: dropbearkey: uninitialized urandom read (32 bytes read)
6139[ 4.522889] random: dropbearkey: uninitialized urandom read (32 bytes read)
6140Generating key, this may take a while...
6141[ 5.490837] macb ff0c0000.ethernet eth0: link up (1000/Full)
6142[ 5.496435] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
6143[ 8.042218] random: dropbearkey: uninitialized urandom read (32 bytes read)
6144Public key portion is:
6145ssh-rsa AAAAB3NzaC1yc2EAAAADAQABAAABAQCIyOVMEt3ygQG5QhwbdnZVcTqi446YDaTr9AUUkuWufOZu8cwQY7h/rosTUPhiZlK2ANNGtkRnoApOveN0d/fh/g3YzqpbfKdePwgVNhefkaXLTA6xfuQ4MCvJHeMWpSTl2ilbqoTcFSHYtFhd63SWg9bhP3jhLtKNfyNaovawJUkhq8LoYNSP23jMQMFZ4esguw1ui6PzrAGnGNFbVC+G7VQFO6yTxW2+IsdtoQwG7oEyEYRL2LNzVvwo3DhCbScMPbl5Fp1MkXIDEeMPa3uC/jtBoCCnEGG6G1tUi7CMAAzdd4aEMoema/3kW70LMZx9YyzZRn7detRnDCzDxZ9z root@VP88x_2017_3_PRJ0191
6146Fingerprint: md5 8e:e7:81:d4:15:f4:46:04:d5:d2:59[ 8.094564] random: fast init done
6147:ee:d4:01:a3:08
6148dropbear.
6149Starting syslogd/klogd: done
6150[ 8.545377] random: crng init done
6151[ 10.337979] jffs2: notice: (2074) jffs2_build_xattr_subsystem: complete building xattr subsystem, 0 of xdatum (0 unchecked, 0 orphan) and 0 of xref (0 dead, 0 orphan) found.
6152hello world.....
6153Starting tcf-agent: OK
6154
6155root@VP88x_2017_3_PRJ0191:~# Fmc134APP 0 1 1 1 1
6156UnitAPI version : 1.3.8 : Enumerating units in the system, please wait...
6157
6158Global Units:
6159Global Unit 0 is on Device 'VP880' (P0): Internal Unit 0 is star 0x01C4 (axi_vp880_8l_host_if) with index 1 of star type 0x000D (Host Interface)
6160Global Unit 1 is on Device 'VP880' (P0): Internal Unit 1 is star 0x0203 (Unknown) with index 0 of star type 0x0005 (ADC)
6161Global Unit 2 is on Device 'VP880' (P0): Internal Unit 2 is star 0x015C (axi_intrc16) with index 0 of star type 0x0014 (Interrupt Controller)
6162Global Unit 3 is on Device 'VP880' (P0): Internal Unit 3 is star 0x014C (axi_i2c_master) with index 0 of star type 0x000E (3rd Party Logic)
6163Global Unit 4 is on Device 'VP880' (P0): Internal Unit 4 is star 0x0202 (Unknown) with index 0 of star type 0x0003 (Memory FIFO)
6164Global Unit 5 is on Device 'VP880' (P0): Internal Unit 5 is star 0x01C5 (axi_vp880_ddr4_fifo) with index 0 of star type 0x0003 (Memory FIFO)
6165
6166
6167Running 'VP880-FMC134' on PCIe, CID725
6168
6169-----------------------------------------------------------
6170Device 'VP880' (P0)
6171-----------------------------------------------------------
6172Constellation ID : 759
6173Number Of Stars : 19
6174Software Build Code: 1524177589 (Thu Apr 19 22:39:49 2018)
6175Firmware Build Code: 0
6176Firmware Revision : 1.2
6177-----------------------------------------------------------
6178
6179 - Unit 0 is VP88x host interface star
6180
6181-------- Onboard Monitoring (ADC Monitor) ---------
6182Temp ( AD7291 ) : OK (52.50C)
6183Vin0 ( ADC0 1.1Va ) : OK ( 1.13V)
6184Vin1 ( ADC0 1.1Vdig ) : OK ( 1.12V)
6185Vin2 ( ADC0 1.9Va ) : OK ( 1.92V)
6186Vin3 ( ADC1 1.1Va ) : OK ( 1.14V)
6187Vin4 ( ADC1 1.1Vdig ) : OK ( 1.13V)
6188Vin5 ( ADC1 1.9Va ) : OK ( 1.92V)
6189
6190Vin6 ( ADC0 raw ) : OK (0.685V)
6191Vin6 ( ADC0 Temp ) : OK (65.74C)
6192
6193Vin7 ( ADC1 raw ) : OK (0.685V)
6194Vin7 ( ADC1 Temp ) : OK (65.36C)
6195---------------------------------------------------
6196
6197
6198-------- Onboard Monitoring (Voltage Monitor) ---------
6199Temp ( AD7291 ) : OK (52.00C)
6200Vin0 ( 5.5Vosc ) : OK ( 5.50V)
6201Vin1 ( 3.3Vclk ) : OK ( 3.24V)
6202Vin2 ( 3.3Vlmx ) : OK ( 3.30V)
6203Vin3 ( 1.8Vcpld ) : OK ( 1.80V)
6204Vin4 ( Vadj ) : OK ( 1.81V)
6205Vin5 ( 3.3Vfmc ) : OK ( 3.25V)
6206Vin6 ( 12.0Vfmc ) : OK (11.95V)
6207Vin7 ( Viob ) : OK ( 1.81V)
6208-------------------------------------------------------
6209
6210Configuring clock tree ...
6211
6212
6213 Setting Clock_Mode
6214Internal Reference Mode
6215Using LMX2581 PLL as Clock Source
6216Xilinx Zynq MP First Stage Boot Loader
6217Release 2017.3 May 24 2018 - 10:35:53
6218Marvell PHY reset
6219SI5338 0x70 not configured
6220SI5338 0x70 configuration finished
6221SI5338 0x71 not configured
6222SI5338 0x71 configuration finished
6223
6224
6225U-Boot 2017.01 (Jul 26 2018 - 02:50:11 -0600) Xilinx ZynqMP ZCU102 revB
6226
6227I2C: ready
6228DRAM: 2 GiB
6229EL Level: EL2
6230Chip ID: xczu3eg
6231MMC: Card did not respond to voltage select!
6232sdhci@ff160000 - probe failed: -95
6233Card did not respond to voltage select!
6234
6235zynqmp_qspi_ofdata_to_platdata: CLK 300000000
6236SF: Detected n25q1024 with page size 256 Bytes, erase size 64 KiB, total 128 MiB
6237*** Warning - bad CRC, using default environment
6238
6239In: serial
6240Out: serial
6241Err: serial
6242Bootmode: QSPI_MODE
6243Net: ZYNQ GEM: ff0c0000, phyaddr c, interface rgmii-id
6244eth0: ethernet@ff0c0000
6245U-BOOT for VP88x_2017_3_PRJ0191
6246
6247Hit any key to stop autoboot: 0
6248SF: Detected n25q1024 with page size 256 Bytes, erase size 64 KiB, total 128 MiB
6249device 0 offset 0x540000, size 0x2200000
6250SF: 35651584 bytes @ 0x540000 Read: OK
6251## Loading kernel from FIT Image at 10000000 ...
6252 Using 'conf@1' configuration
6253 Trying 'kernel@0' kernel subimage
6254 Description: Linux Kernel
6255 Type: Kernel Image
6256 Compression: uncompressed
6257 Data Start: 0x100000d8
6258 Data Size: 12503552 Bytes = 11.9 MiB
6259 Architecture: AArch64
6260 OS: Linux
6261 Load Address: 0x00080000
6262 Entry Point: 0x00080000
6263 Hash algo: sha1
6264 Hash value: 6738559f9c7602fa2a0ff36fdfc8cf5b9b3e6565
6265 Verifying Hash Integrity ... sha1+ OK
6266## Loading ramdisk from FIT Image at 10000000 ...
6267 Using 'conf@1' configuration
6268 Trying 'ramdisk@0' ramdisk subimage
6269 Description: ramdisk
6270 Type: RAMDisk Image
6271 Compression: uncompressed
6272 Data Start: 0x10bf54e4
6273 Data Size: 8973721 Bytes = 8.6 MiB
6274 Architecture: AArch64
6275 OS: Linux
6276 Load Address: unavailable
6277 Entry Point: unavailable
6278 Hash algo: sha1
6279 Hash value: 4b595c4e0c42ac8967d3d732b389c6521f0b492f
6280 Verifying Hash Integrity ... sha1+ OK
6281## Loading fdt from FIT Image at 10000000 ...
6282 Using 'conf@1' configuration
6283 Trying 'fdt@0' fdt subimage
6284 Description: Flattened Device Tree blob
6285 Type: Flat Device Tree
6286 Compression: uncompressed
6287 Data Start: 0x10becbd0
6288 Data Size: 34910 Bytes = 34.1 KiB
6289 Architecture: AArch64
6290 Hash algo: sha1
6291 Hash value: 20fc450d3d82f1967aba254f93c3704b6f5d1f6e
6292 Verifying Hash Integrity ... sha1+ OK
6293 Booting using the fdt blob at 0x10becbd0
6294 Loading Kernel Image ... OK
6295 Loading Ramdisk to 07771000, end 07fffd99 ... OK
6296 Loading Device Tree to 0000000007765000, end 000000000777085d ... OK
6297
6298Starting kernel ...
6299
6300[ 0.000000] Booting Linux on physical CPU 0x0
6301[ 0.000000] Linux version 4.9.0 (user@user-VirtualBox) (gcc version 6.2.1 20161016 (Linaro GCC 6.2-2016.11) ) #1 SMP Thu Jul 26 01:50:46 MDT 2018
6302[ 0.000000] Boot CPU: AArch64 Processor [410fd034]
6303[ 0.000000] earlycon: cdns0 at MMIO 0x00000000ff010000 (options '115200n8')
6304[ 0.000000] bootconsole [cdns0] enabled
6305[ 0.000000] efi: Getting EFI parameters from FDT:
6306[ 0.000000] efi: UEFI not found.
6307[ 0.000000] cma: Reserved 512 MiB at 0x0000000060000000
6308[ 0.000000] psci: probing for conduit method from DT.
6309[ 0.000000] psci: PSCIv1.0 detected in firmware.
6310[ 0.000000] psci: Using standard PSCI v0.2 function IDs
6311[ 0.000000] psci: MIGRATE_INFO_TYPE not supported.
6312[ 0.000000] percpu: Embedded 21 pages/cpu @ffffffc05ff76000 s46232 r8192 d31592 u86016
6313[ 0.000000] Detected VIPT I-cache on CPU0
6314[ 0.000000] CPU features: enabling workaround for ARM erratum 845719
6315[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 517120
6316[ 0.000000] Kernel command line: console=ttyPS0,115200 earlyprintk earlycon=cdns,mmio,0xFF010000,115200n8 uio_pdrv_genirq.of_id=generic-uio clk_ignore_unused cma=512M coherent_pool=64MiB
6317[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
6318[ 0.000000] Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes)
6319[ 0.000000] Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes)
6320[ 0.000000] Memory: 1519128K/2097152K available (8508K kernel code, 562K rwdata, 2636K rodata, 448K init, 382K bss, 53736K reserved, 524288K cma-reserved)
6321[ 0.000000] Virtual kernel memory layout:
6322[ 0.000000] modules : 0xffffff8000000000 - 0xffffff8008000000 ( 128 MB)
6323[ 0.000000] vmalloc : 0xffffff8008000000 - 0xffffffbebfff0000 ( 250 GB)
6324[ 0.000000] .text : 0xffffff8008080000 - 0xffffff80088d0000 ( 8512 KB)
6325[ 0.000000] .rodata : 0xffffff80088d0000 - 0xffffff8008b70000 ( 2688 KB)
6326[ 0.000000] .init : 0xffffff8008b70000 - 0xffffff8008be0000 ( 448 KB)
6327[ 0.000000] .data : 0xffffff8008be0000 - 0xffffff8008c6ca00 ( 563 KB)
6328[ 0.000000] .bss : 0xffffff8008c6ca00 - 0xffffff8008ccc434 ( 383 KB)
6329[ 0.000000] fixed : 0xffffffbefe7fd000 - 0xffffffbefec00000 ( 4108 KB)
6330[ 0.000000] PCI I/O : 0xffffffbefee00000 - 0xffffffbeffe00000 ( 16 MB)
6331[ 0.000000] vmemmap : 0xffffffbf00000000 - 0xffffffc000000000 ( 4 GB maximum)
6332[ 0.000000] 0xffffffbf00000000 - 0xffffffbf01c00000 ( 28 MB actual)
6333[ 0.000000] memory : 0xffffffc000000000 - 0xffffffc080000000 ( 2048 MB)
6334[ 0.000000] Hierarchical RCU implementation.
6335[ 0.000000] Build-time adjustment of leaf fanout to 64.
6336[ 0.000000] RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=4.
6337[ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=64, nr_cpu_ids=4
6338[ 0.000000] NR_IRQS:64 nr_irqs:64 0
6339[ 0.000000] GIC: Adjusting CPU interface base to 0x00000000f902f000
6340[ 0.000000] GIC: Using split EOI/Deactivate mode
6341[ 0.000000] arm_arch_timer: Architected cp15 timer(s) running at 50.00MHz (phys).
6342[ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0xb8812736b, max_idle_ns: 440795202655 ns
6343[ 0.000003] sched_clock: 56 bits at 50MHz, resolution 20ns, wraps every 4398046511100ns
6344[ 0.008255] Console: colour dummy device 80x25
6345[ 0.012527] Calibrating delay loop (skipped), value calculated using timer frequency.. 100.00 BogoMIPS (lpj=200000)
6346[ 0.022886] pid_max: default: 32768 minimum: 301
6347[ 0.027578] Mount-cache hash table entries: 4096 (order: 3, 32768 bytes)
6348[ 0.034137] Mountpoint-cache hash table entries: 4096 (order: 3, 32768 bytes)
6349[ 0.041862] ASID allocator initialised with 65536 entries
6350[ 0.047560] zynqmp_plat_init Power management API v0.3
6351[ 0.052577] EFI services will not be available.
6352[ 0.057342] Detected VIPT I-cache on CPU1
6353[ 0.057376] CPU1: Booted secondary processor [410fd034]
6354[ 0.057636] Detected VIPT I-cache on CPU2
6355[ 0.057653] CPU2: Booted secondary processor [410fd034]
6356[ 0.057903] Detected VIPT I-cache on CPU3
6357[ 0.057919] CPU3: Booted secondary processor [410fd034]
6358[ 0.057952] Brought up 4 CPUs
6359[ 0.088237] SMP: Total of 4 processors activated.
6360[ 0.092913] CPU features: detected feature: 32-bit EL0 Support
6361[ 0.098709] CPU: All CPU(s) started at EL2
6362[ 0.102782] alternatives: patching kernel code
6363[ 0.108045] devtmpfs: initialized
6364[ 0.115568] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
6365[ 0.136562] xor: measuring software checksum speed
6366[ 0.181235] 8regs : 2543.000 MB/sec
6367[ 0.221259] 8regs_prefetch: 2266.000 MB/sec
6368[ 0.265620] 32regs : 3125.000 MB/sec
6369[ 0.305648] 32regs_prefetch: 2627.000 MB/sec
6370[ 0.310069] xor: using function: 32regs (3125.000 MB/sec)
6371[ 0.315525] pinctrl core: initialized pinctrl subsystem
6372[ 0.321205] NET: Registered protocol family 16
6373[ 0.326302] Failed to initialise IOMMU /amba/smmu@fd800000
6374[ 0.331799] vdso: 2 pages (1 code @ ffffff80088d7000, 1 data @ ffffff8008be4000)
6375[ 0.339005] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers.
6376[ 0.374344] DMA: preallocated 65536 KiB pool for atomic allocations
6377[ 0.390703] reset_zynqmp reset-controller: Xilinx zynqmp reset driver probed
6378[ 0.398180] ARM CCI_400_r1 PMU driver probed[ 0.404942] zynqmp-pinctrl ff180000.pinctrl: zynqmp pinctrl initialized
6379[ 0.431656] HugeTLB registered 2 MB page size, pre-allocated 0 pages
6380[ 0.504925] raid6: int64x1 gen() 447 MB/s
6381[ 0.576929] raid6: int64x1 xor() 485 MB/s
6382[ 0.648952] raid6: int64x2 gen() 741 MB/s
6383[ 0.720963] raid6: int64x2 xor() 661 MB/s
6384[ 0.793026] raid6: int64x4 gen() 1086 MB/s
6385[ 0.865058] raid6: int64x4 xor() 816 MB/s
6386[ 0.937088] raid6: int64x8 gen() 1265 MB/s
6387[ 1.009160] raid6: int64x8 xor() 824 MB/s
6388[ 1.081245] raid6: neonx1 gen() 798 MB/s
6389[ 1.153214] raid6: neonx1 xor() 837 MB/s
6390[ 1.225296] raid6: neonx2 gen() 1286 MB/s
6391[ 1.297307] raid6: neonx2 xor() 1143 MB/s
6392[ 1.369358] raid6: neonx4 gen() 1663 MB/s
6393[ 1.441397] raid6: neonx4 xor() 1306 MB/s
6394[ 1.513441] raid6: neonx8 gen() 1753 MB/s
6395[ 1.585485] raid6: neonx8 xor() 1348 MB/s
6396[ 1.589560] raid6: using algorithm neonx8 gen() 1753 MB/s
6397[ 1.594922] raid6: .... xor() 1348 MB/s, rmw enabled
6398[ 1.599852] raid6: using intx1 recovery algorithm
6399[ 1.605009] Write failed gate address:1000f02
6400[ 1.612977] SCSI subsystem initialized
6401[ 1.616770] usbcore: registered new interface driver usbfs
6402[ 1.622102] usbcore: registered new interface driver hub
6403[ 1.627378] usbcore: registered new device driver usb
6404[ 1.632420] media: Linux media interface: v0.10
6405[ 1.636875] Linux video capture interface: v2.00
6406[ 1.641460] pps_core: LinuxPPS API ver. 1 registered
6407[ 1.646364] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
6408[ 1.655457] PTP clock support registered
6409[ 1.659357] EDAC MC: Ver: 3.0.0
6410[ 1.662762] FPGA manager framework
6411[ 1.666110] fpga-region fpga-full: FPGA Region probed
6412[ 1.671109] Advanced Linux Sound Architecture Driver Initialized.
6413[ 1.677359] Bluetooth: Core ver 2.22
6414[ 1.680771] NET: Registered protocol family 31
6415[ 1.685162] Bluetooth: HCI device and connection manager initialized
6416[ 1.691479] Bluetooth: HCI socket layer initialized
6417[ 1.696321] Bluetooth: L2CAP socket layer initialized
6418[ 1.701346] Bluetooth: SCO socket layer initialized
6419[ 1.706751] clocksource: Switched to clocksource arch_sys_counter
6420[ 1.712757] VFS: Disk quotas dquot_6.6.0
6421[ 1.716586] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
6422[ 1.726865] NET: Registered protocol family 2
6423[ 1.731423] TCP established hash table entries: 16384 (order: 5, 131072 bytes)
6424[ 1.738541] TCP bind hash table entries: 16384 (order: 6, 262144 bytes)
6425[ 1.745331] TCP: Hash tables configured (established 16384 bind 16384)
6426[ 1.751733] UDP hash table entries: 1024 (order: 3, 32768 bytes)
6427[ 1.757665] UDP-Lite hash table entries: 1024 (order: 3, 32768 bytes)
6428[ 1.764172] NET: Registered protocol family 1
6429[ 1.768673] RPC: Registered named UNIX socket transport module.
6430[ 1.774399] RPC: Registered udp transport module.
6431[ 1.779066] RPC: Registered tcp transport module.
6432[ 1.783737] RPC: Registered tcp NFSv4.1 backchannel transport module.
6433[ 1.790289] Trying to unpack rootfs image as initramfs...
6434[ 2.113380] Freeing initrd memory: 8760K (ffffffc007771000 - ffffffc007fff000)
6435[ 2.120803] hw perfevents: enabled with armv8_pmuv3 PMU driver, 7 counters available
6436[ 2.129105] futex hash table entries: 1024 (order: 5, 131072 bytes)
6437[ 2.135738] workingset: timestamp_bits=62 max_order=19 bucket_order=0
6438[ 2.142676] NFS: Registering the id_resolver key type
6439[ 2.147558] Key type id_resolver registered
6440[ 2.151690] Key type id_legacy registered
6441[ 2.155674] nfs4filelayout_init: NFSv4 File Layout Driver Registering...
6442[ 2.162344] ntfs: driver 2.1.32 [Flags: R/W].
6443[ 2.166673] jffs2: version 2.2. (NAND) (SUMMARY) © 2001-2006 Red Hat, Inc.
6444[ 2.181452] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 247)
6445[ 2.188662] io scheduler noop registered
6446[ 2.192545] io scheduler deadline registered
6447[ 2.196790] io scheduler cfq registered (default)
6448[ 2.202041] nwl-pcie fd0e0000.pcie: Link is DOWN
6449[ 2.206507] OF: PCI: host bridge /amba/pcie@fd0e0000 ranges:
6450[ 2.212111] OF: PCI: MEM 0xe0000000..0xefffffff -> 0xe0000000
6451[ 2.217978] OF: PCI: MEM 0x600000000..0x7ffffffff -> 0x600000000
6452[ 2.224203] nwl-pcie fd0e0000.pcie: PCI host bridge to bus 0000:00
6453[ 2.230264] pci_bus 0000:00: root bus resource [bus 00-ff]
6454[ 2.235709] pci_bus 0000:00: root bus resource [mem 0xe0000000-0xefffffff]
6455[ 2.242542] pci_bus 0000:00: root bus resource [mem 0x600000000-0x7ffffffff pref]
6456[ 2.250251] pci 0000:00:00.0: PCI bridge to [bus 01-0c]
6457[ 2.256005] xilinx-dpdma fd4c0000.dma: Xilinx DPDMA engine is probed
6458[ 2.262376] xilinx-vdma 400000000.dma: Xilinx AXI VDMA Engine Driver Probed!!
6459[ 2.269428] xilinx-vdma 400010000.dma: Xilinx AXI VDMA Engine Driver Probed!!
6460[ 2.276588] xilinx-zynqmp-dma fd500000.dma: ZynqMP DMA driver Probe success
6461[ 2.283450] xilinx-zynqmp-dma fd510000.dma: ZynqMP DMA driver Probe success
6462[ 2.290371] xilinx-zynqmp-dma fd520000.dma: ZynqMP DMA driver Probe success
6463[ 2.297294] xilinx-zynqmp-dma fd530000.dma: ZynqMP DMA driver Probe success
6464[ 2.304212] xilinx-zynqmp-dma fd540000.dma: ZynqMP DMA driver Probe success
6465[ 2.311133] xilinx-zynqmp-dma fd550000.dma: ZynqMP DMA driver Probe success
6466[ 2.318052] xilinx-zynqmp-dma fd560000.dma: ZynqMP DMA driver Probe success
6467[ 2.324972] xilinx-zynqmp-dma fd570000.dma: ZynqMP DMA driver Probe success
6468[ 2.331930] xilinx-zynqmp-dma ffa80000.dma: ZynqMP DMA driver Probe success
6469[ 2.338817] xilinx-zynqmp-dma ffa90000.dma: ZynqMP DMA driver Probe success
6470[ 2.345732] xilinx-zynqmp-dma ffaa0000.dma: ZynqMP DMA driver Probe success
6471[ 2.352650] xilinx-zynqmp-dma ffab0000.dma: ZynqMP DMA driver Probe success
6472[ 2.359573] xilinx-zynqmp-dma ffac0000.dma: ZynqMP DMA driver Probe success
6473[ 2.366495] xilinx-zynqmp-dma ffad0000.dma: ZynqMP DMA driver Probe success
6474[ 2.373413] xilinx-zynqmp-dma ffae0000.dma: ZynqMP DMA driver Probe success
6475[ 2.380337] xilinx-zynqmp-dma ffaf0000.dma: ZynqMP DMA driver Probe success
6476[ 2.408725] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
6477[ 2.416198] ff000000.serial: ttyPS1 at MMIO 0xff000000 (irq = 46, base_baud = 6250000) is a xuartps
6478[ 2.425273] ff010000.serial: ttyPS0 at MMIO 0xff010000 (irq = 47, base_baud =·r¢¢0000) is a xuartps
6479 ºêconsole [ttyPS0] enabled
6480[ 2.434217] console [ttyPS0] enabled
6481[ 2.441185] bootconsole [cdns0] disabled
6482[ 2.441185] bootconsole [cdns0] disabled
6483[ 2.449246] Unable to detect cache hierarchy from DT for CPU 0
6484[ 2.459641] brd: module loaded
6485[ 2.465441] loop: module loaded
6486[ 2.469417] ahci-ceva fd0c0000.ahci: AHCI 0001.0301 32 slots 2 ports 6 Gbps 0x3 impl platform mode
6487[ 2.478302] ahci-ceva fd0c0000.ahci: flags: 64bit ncq sntf pm clo only pmp fbs pio slum part ccc sds apst
6488[ 2.489034] scsi host0: ahci-ceva
6489[ 2.492451] scsi host1: ahci-ceva
6490[ 2.495786] ata1: SATA max UDMA/133 mmio [mem 0xfd0c0000-0xfd0c1fff] port 0x100 irq 43
6491[ 2.503617] ata2: SATA max UDMA/133 mmio [mem 0xfd0c0000-0xfd0c1fff] port 0x180 irq 43
6492[ 2.511666] mtdoops: mtd device (mtddev=name/number) must be supplied
6493[ 2.518986] zynqmp-qspi ff0f0000.spi: rx bus width not found
6494[ 2.524919] m25p80 spi0.0: found n25q00, expected n25q512a
6495[ 2.530617] m25p80 spi0.0: n25q00 (131072 Kbytes)
6496[ 2.535256] 5 ofpart partitions found on MTD device spi0.0
6497[ 2.540704] Creating 5 MTD partitions on "spi0.0":
6498[ 2.545481] 0x000000000000-0x000000500000 : "boot"
6499[ 2.550736] 0x000000500000-0x000000540000 : "bootenv"
6500[ 2.556123] 0x000000540000-0x000002740000 : "kernel"
6501[ 2.561411] 0x000002740000-0x000003740000 : "user"
6502[ 2.566541] 0x000003740000-0x000003750000 : "test"
6503[ 2.572545] libphy: Fixed MDIO Bus: probed
6504[ 2.577654] tun: Universal TUN/TAP device driver, 1.6
6505[ 2.582625] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
6506[ 2.588903] CAN device driver interface
6507[ 2.593226] macb ff0c0000.ethernet: Not enabling partial store and forward
6508[ 2.600535] libphy: MACB_mii_bus: probed
6509[ 2.679026] macb ff0c0000.ethernet eth0: Cadence GEM rev 0x50070106 at 0xff0c0000 irq 30 (00:0a:35:00:22:01)
6510[ 2.688776] Marvell 88E1510 ff0c0000.etherne:00: attached PHY driver [Marvell 88E1510] (mii_bus:phy_addr=ff0c0000.etherne:00, irq=-1)
6511[ 2.701374] usbcore: registered new interface driver asix
6512[ 2.706739] usbcore: registered new interface driver ax88179_178a
6513[ 2.712786] usbcore: registered new interface driver cdc_ether
6514[ 2.718600] usbcore: registered new interface driver net1080
6515[ 2.724240] usbcore: registered new interface driver cdc_subset
6516[ 2.730145] usbcore: registered new interface driver zaurus
6517[ 2.735711] usbcore: registered new interface driver cdc_ncm
6518[ 2.741667] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
6519[ 2.748107] ehci-pci: EHCI PCI platform driver
6520[ 2.752759] usbcore: registered new interface driver uas
6521[ 2.758019] usbcore: registered new interface driver usb-storage
6522[ 2.764275] mousedev: PS/2 mouse device common for all mice
6523[ 2.770179] rtc_zynqmp ffa60000.rtc: rtc core: registered ffa60000.rtc as rtc0
6524[ 2.777345] i2c /dev entries driver
6525[ 2.780977] cdns-i2c ff020000.i2c: 400 kHz mmio ff020000 irq 32
6526[ 2.787032] cdns-i2c ff030000.i2c: 400 kHz mmio ff030000 irq 33
6527[ 2.793808] usbcore: registered new interface driver uvcvideo
6528[ 2.799465] USB Video Class driver (1.1.1)
6529[ 2.803904] Bluetooth: HCI UART driver ver 2.3
6530[ 2.808261] Bluetooth: HCI UART protocol H4 registered
6531[ 2.813379] Bluetooth: HCI UART protocol BCSP registered
6532[ 2.818673] Bluetooth: HCI UART protocol LL registered
6533[ 2.823793] Bluetooth: HCI UART protocol ATH3K registered
6534[ 2.824957] ata1: SATA link down (SStatus 0 SControl 330)
6535[ 2.824996] ata2: SATA link down (SStatus 0 SControl 330)
6536[ 2.839938] Bluetooth: HCI UART protocol Three-wire (H5) registered
6537[ 2.846224] Bluetooth: HCI UART protocol Intel registered
6538[ 2.851604] Bluetooth: HCI UART protocol Broadcom registered
6539[ 2.857212] Bluetooth: HCI UART protocol QCA registered
6540[ 2.862456] usbcore: registered new interface driver bcm203x
6541[ 2.868092] usbcore: registered new interface driver bpa10x
6542[ 2.873648] usbcore: registered new interface driver bfusb
6543[ 2.879116] usbcore: registered new interface driver btusb
6544[ 2.884554] Bluetooth: Generic Bluetooth SDIO driver ver 0.1
6545[ 2.890249] usbcore: registered new interface driver ath3k
6546[ 2.895785] EDAC MC: ECC not enabled
6547[ 2.899411] EDAC DEVICE0: Giving out device to module edac controller cache_err: DEV edac (POLLED)
6548[ 2.908438] EDAC DEVICE1: Giving out device to module zynqmp-ocm-edac controller zynqmp_ocm: DEV ff960000.memory-controller (INTERRUPT)
6549[ 2.920731] sdhci: Secure Digital Host Controller Interface driver
6550[ 2.926825] sdhci: Copyright(c) Pierre Ossman
6551[ 2.931164] sdhci-pltfm: SDHCI platform and OF driver helper
6552[ 2.982762] mmc0: SDHCI controller on ff160000.sdhci [ff160000.sdhci] using ADMA 64-bit
6553[ 2.990872] ledtrig-cpu: registered to indicate activity on CPUs
6554[ 2.996931] usbcore: registered new interface driver usbhid
6555[ 3.002422] usbhid: USB HID core driver
6556[ 3.007817] fpga_manager fpga0: Xilinx ZynqMP FPGA Manager registered
6557[ 3.014683] xilinx-dp-snd-pcm dp_snd_pcm0: Xilinx DisplayPort Sound PCM probed
6558[ 3.021859] xilinx-dp-snd-pcm dp_snd_pcm1: Xilinx DisplayPort Sound PCM probed
6559[ 3.029204] PLL: shutdown
6560[ 3.032635] Write failed to divider address:fd1a007c
6561[ 3.037672] PLL: enable
6562[ 3.040199] xilinx-dp-snd-codec dp_snd_codec0: Xilinx DisplayPort Sound Codec probed
6563[ 3.048227] xilinx-dp-snd-card dp_snd_card: xilinx-dp-snd-codec-dai <-> xilinx-dp-snd-codec-dai mapping ok
6564[ 3.057903] xilinx-dp-snd-card dp_snd_card: xilinx-dp-snd-codec-dai <-> xilinx-dp-snd-codec-dai mapping ok
6565[ 3.067755] xilinx-dp-snd-card dp_snd_card: Xilinx DisplayPort Sound Card probed
6566[ 3.075180] pktgen: Packet Generator for packet performance testing. Version: 2.75
6567[ 3.084838] Netfilter messages via NETLINK v0.30.
6568[ 3.089583] ip_tables: (C) 2000-2006 Netfilter Core Team
6569[ 3.094864] Initializing XFRM netlink socket
6570[ 3.099285] NET: Registered protocol family 10
6571[ 3.104285] ip6_tables: (C) 2000-2006 Netfilter Core Team
6572[ 3.109639] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver
6573[ 3.115857] NET: Registered protocol family 17
6574[ 3.120229] NET: Registered protocol family 15
6575[ 3.124657] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this.
6576[ 3.137578] Ebtables v2.0 registered
6577[ 3.141187] can: controller area network core (rev 20120528 abi 9)
6578[ 3.147334] NET: Registered protocol family 29
6579[ 3.151727] can: raw protocol (rev 20120528)
6580[ 3.155979] can: broadcast manager protocol (rev 20161123 t)
6581[ 3.161627] can: netlink gateway (rev 20130117) max_hops=1
6582[ 3.169155] Bluetooth: RFCOMM TTY layer initialized
6583[ 3.175965] Bluetooth: RFCOMM socket layer initialized
6584[ 3.181021] Bluetooth: RFCOMM ver 1.11
6585[ 3.184756] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
6586[ 3.190038] Bluetooth: BNEP filters: protocol multicast
6587[ 3.195248] Bluetooth: BNEP socket layer initialized
6588[ 3.200193] Bluetooth: HIDP (Human Interface Emulation) ver 1.2
6589[ 3.206098] Bluetooth: HIDP socket layer initialized
6590[ 3.211219] 9pnet: Installing 9P2000 support
6591[ 3.215418] Key type dns_resolver registered
6592[ 3.220115] registered taskstats version 1
6593[ 3.225648] Btrfs loaded, crc32c=crc32c-generic
6594[ 3.238836] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller
6595[ 3.244273] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 1
6596[ 3.252136] xhci-hcd xhci-hcd.0.auto: hcc params 0x0238f625 hci version 0x100 quirks 0x02010010
6597[ 3.260788] xhci-hcd xhci-hcd.0.auto: irq 229, io mem 0xfe300000
6598[ 3.266864] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
6599[ 3.273572] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
6600[ 3.280774] usb usb1: Product: xHCI Host Controller
6601[ 3.285633] usb usb1: Manufacturer: Linux 4.9.0 xhci-hcd
6602[ 3.290931] usb usb1: SerialNumber: xhci-hcd.0.auto
6603[ 3.296099] hub 1-0:1.0: USB hub found
6604[ 3.299785] hub 1-0:1.0: 1 port detected
6605[ 3.303791] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller
6606[ 3.309196] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 2
6607[ 3.316869] usb usb2: We don't know the algorithms for LPM for this host, disabling LPM.
6608[ 3.324965] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003
6609[ 3.331673] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
6610[ 3.338876] usb usb2: Product: xHCI Host Controller
6611[ 3.343736] usb usb2: Manufacturer: Linux 4.9.0 xhci-hcd
6612[ 3.349033] usb usb2: SerialNumber: xhci-hcd.0.auto
6613[ 3.354099] hub 2-0:1.0: USB hub found
6614[ 3.357782] hub 2-0:1.0: 1 port detected
6615[ 3.362048] rtc_zynqmp ffa60000.rtc: setting system clock to 1970-01-01 00:00:15 UTC (15)
6616[ 3.370253] clk: Not disabling unused clocks
6617[ 3.374441] ALSA device list:
6618[ 3.377389] #0: DisplayPort monitor
6619[ 3.381660] Freeing unused kernel memory: 448K (ffffffc000b70000 - ffffffc000be0000)
6620INIT: version 2.88 booting
6621Starting udev
6622[ 3.500680] udevd[1611]: starting version 3.2
6623[ 3.505316] random: udevd: uninitialized urandom read (16 bytes read)
6624[ 3.511752] random: udevd: uninitialized urandom read (16 bytes read)
6625[ 3.518233] random: udevd: uninitialized urandom read (16 bytes read)
6626[ 3.524623] random: udevd: uninitialized urandom read (16 bytes read)
6627[ 3.534644] udevd[1612]: starting eudev-3.2
6628[ 3.577847] random: udevd: uninitialized urandom read (16 bytes read)
6629[ 3.587864] random: udevd: uninitialized urandom read (16 bytes read)
6630[ 3.614837] dsaxidma: loading out-of-tree module taints kernel.
6631[ 3.618158] dsaxidma: loading out-of-tree module taints kernel.
6632[ 3.618862] <dma1> init: registered
6633[ 3.637708] <dma2> init: registered
6634Populating dev cache
6635[ 4.133530] random: dd: uninitialized urandom read (512 bytes read)
6636Thu Jul 26 08:51:43 UTC 2018
6637Starting internet superserver: inetd.
6638Running postinst /etc/rpm-postinsts/100-sysvinit-inittab...
6639update-rc.d: /etc/init.d/run-postinsts exists during rc.d purge (continuing)
6640INIT: Entering runlevel: 5
6641Hello World
6642[22]:0x12
6643[20]:0x201
6644[20]:0x201
6645[22]:0x1
6646[0]:0x140
6647[0]:0x140
6648Configuring network interfaces... [ 4.432159] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
6649done.
6650Starting Dropbear SSH server: [ 4.461324] random: dropbearkey: uninitialized urandom read (32 bytes read)
6651[ 4.471424] random: dropbearkey: uninitialized urandom read (32 bytes read)
6652Generating key, this may take a while...
6653[ 5.458867] macb ff0c0000.ethernet eth0: link up (1000/Full)
6654[ 5.464466] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
6655[ 6.964355] random: dropbearkey: uninitialized urandom read (32 bytes read)
6656Public key portion is:
6657ssh-rsa AAAAB3NzaC1yc2EAAAADAQABAAABAQDHkk1xDkqYpIud6G1J3ilP69K7kGcJIh8V2ugutQlSH6rDc/RsBLXO3lJlG7e1WDRi+FMo5cEtneflxd0stWsyu5fKsioGyIb4zuqvmruRI1R4TFGI4V+jHYzl0B/TQk8f9/5hZ8+PTVC3sIPhvEPKTKBZYI1IwUD7Vlye+XOVEGvocMfEtgdLj1WIz9+DEZDAqilUA//pD/5fqAw4pJy1Un5UfrnRFyUUsgRnYqcpl7knLUFal4sCuxFsxkVHIgd07SWakUZFw5QxbKeYY86hWL+xd7P7g2uzqW/ciwallEshNPUw4+7WPtyVcgRHnNKO3FfGcruKWRqYFFu+e5Qr root@VP88x_2017_3_PRJ0191
6658Fingerprint: md5 ce:2e:e8:dc:f7:c5:c8:d3:e5:7b:d0:fd:e2:c6:55:35
6659dropbear.
6660Starting syslogd/klogd: done
6661[ 7.017629] random: fast init done
6662[ 7.445578] random: crng init done
6663[ 9.131506] jffs2: notice: (2072) jffs2_build_xattr_subsystem: complete building xattr subsystem, 0 of xdatum (0 unchecked, 0 orphan) and 0 of xref (0 dead, 0 orphan) found.
6664hello world.....
6665Starting tcf-agent: OK
6666
6667root@VP88x_2017_3_PRJ0191:~# Fmc134APP 0 1 1 1 1
6668UnitAPI version : 1.3.8 : Enumerating units in the system, please wait...
6669
6670unitapi_auto_config returned -50
6671
6672Invalid device handle '1'
6673Press a key to exit the application
6674
6675root@VP88x_2017_3_PRJ0191:~# echo 1 > /sys/bus/pci/
6676devices/ drivers_probe slots/
6677drivers/ rescan uevent
6678drivers_autoprobe resource_alignment
6679root@VP88x_2017_3_PRJ0191:~# echo 1 > /sys/bus/pci/devices/0000\:00\:00.0/
6680broken_parity_status enable rescan
6681class irq resource
6682config local_cpulist subsystem/
6683consistent_dma_mask_bits local_cpus subsystem_device
6684device modalias subsystem_vendor
6685devspec msi_bus uevent
6686dma_mask_bits pci_bus/ vendor
6687driver_override remove
6688root@VP88x_2017_3_PRJ0191:~# echo 1 > /sys/bus/pci/devices/0000\:00\:00.0
66890000:00:00.0/
6690root@VP88x_2017_3_PRJ0191:~# echo 1 > /sys/bus/pci/devices/0000\:00\:00.0
66910000:00:00.0/
6692root@VP88x_2017_3_PRJ0191:~# echo 1 > /sys/bus/pci/devices/0000\:00\:00.0/re
6693remove rescan resource
6694root@VP88x_2017_3_PRJ0191:~# echo 1 > /sys/bus/pci/devices/0000\:00\:00.0/re
6695remove rescan resource
6696root@VP88x_2017_3_PRJ0191:~# echo 1 > /sys/bus/pci/devices/0000\:00\:00.0/remove
6697root@VP88x_2017_3_PRJ0191:~# echo 1 > /sys/bus/pci/d
6698devices/ drivers/ drivers_autoprobe drivers_probe
6699root@VP88x_2017_3_PRJ0191:~# echo 1 > /sys/bus/pci/d
6700devices/ drivers/ drivers_autoprobe drivers_probe
6701root@VP88x_2017_3_PRJ0191:~# find /sys/bus/pci/ | grep resc
6702/sys/bus/pci/rescan
6703root@VP88x_2017_3_PRJ0191:~# echo 1 > /sys/bus/pci/rescan
6704[ 114.515306] pci 0000:00:00.0: PCI bridge to [bus 01-0c]
6705root@VP88x_2017_3_PRJ0191:~# echo 1 > /sys/bus/pci/devices/0000\:00\:00.0
67060000:00:00.0/
6707root@VP88x_2017_3_PRJ0191:~# echo 1 > /sys/bus/pci/devices/0000\:00\:00.0
67080000:00:00.0/
6709root@VP88x_2017_3_PRJ0191:~# echo 1 > /sys/bus/pci/devices/0000\:00\:00.0
67100000:00:00.0/
6711root@VP88x_2017_3_PRJ0191:~# echo 1 > /sys/bus/pci/devices/0000\:00\:00.0
67120000:00:00.0/
6713root@VP88x_2017_3_PRJ0191:~# echo 1 > /sys/bus/pci/devices/0000\:00\:00.0
67140000:00:00.0/
6715root@VP88x_2017_3_PRJ0191:~# echo 1 > /sys/bus/pci/devices/0000\:00\:00.0
67160000:00:00.0/
6717root@VP88x_2017_3_PRJ0191:~# echo 1 > /sys/bus/pci/devices/0000\:00\:00.0^C
6718root@VP88x_2017_3_PRJ0191:~# Fmc134APP 0 1 1 1 1
6719UnitAPI version : 1.3.8 : Enumerating units in the system, please wait...
6720
6721unitapi_auto_config returned -50
6722
6723Invalid device handle '1'
6724Press a key to exit the application
6725^C
6726root@VP88x_2017_3_PRJ0191:~# echo 1 > /sys/bus/pci/devices/0000\:00\:00.0/remove
6727root@VP88x_2017_3_PRJ0191:~# echo 1 > /sys/bus/pci/rescan
6728[ 151.411310] pci 0000:00:00.0: PCI bridge to [bus 01-0c]
6729root@VP88x_2017_3_PRJ0191:~# cp /mnt/pciconfig0 /sys/bus/pci/devices/0000\:00\:00.0
67300000:00:00.0/
6731root@VP88x_2017_3_PRJ0191:~# cp /mnt/pciconfig0 /sys/bus/pci/devices/0000\:00\:00.0
67320000:00:00.0/
6733root@VP88x_2017_3_PRJ0191:~# cp /mnt/pciconfig0 /sys/bus/pci/devices/0000\:00\:00.0
67340000:00:00.0/
6735root@VP88x_2017_3_PRJ0191:~# cp /mnt/pciconfig0 /sys/bus/pci/devices/0000\:00\:00.0
67360000:00:00.0/
6737root@VP88x_2017_3_PRJ0191:~# cp /mnt/pciconfig0 /sys/bus/pci/devices/0000\:00\:00.0
67380000:00:00.0/
6739root@VP88x_2017_3_PRJ0191:~# cp /mnt/pciconfig0 /sys/bus/pci/devices/0000\:00\:00.0
67400000:00:00.0/
6741root@VP88x_2017_3_PRJ0191:~# cp /mnt/pciconfig0 /sys/bus/pci/devices/0000\:00\:00.0/
6742broken_parity_status enable rescan
6743class irq resource
6744config local_cpulist subsystem/
6745consistent_dma_mask_bits local_cpus subsystem_device
6746device modalias subsystem_vendor
6747devspec msi_bus uevent
6748dma_mask_bits pci_bus/ vendor
6749driver_override remove
6750root@VP88x_2017_3_PRJ0191:~# cp /mnt/pciconfig0 /sys/bus/pci/devices/0000\:00\:00.0/config
6751cp: can't create '/sys/bus/pci/devices/0000:00:00.0/config': File exists
6752root@VP88x_2017_3_PRJ0191:~# rm /sys/bus/pci/devices/0000\:00\:00.0/config
6753rm: can't remove '/sys/bus/pci/devices/0000:00:00.0/config': Operation not permitted
6754root@VP88x_2017_3_PRJ0191:~# chmod 777 /sys/bus/pci/devices/0000\:00\:00.0/confi
6755g
6756root@VP88x_2017_3_PRJ0191:~# cp /mnt/pciconfig0 /sys/bus/pci/devices/0000\:00\:00.0/config
6757cp: can't create '/sys/bus/pci/devices/0000:00:00.0/config': File exists
6758root@VP88x_2017_3_PRJ0191:~# rm /sys/bus/pci/devices/0000\:00\:00.0/config
6759rm: can't remove '/sys/bus/pci/devices/0000:00:00.0/config': Operation not permitted
6760root@VP88x_2017_3_PRJ0191:~# ls -al /sys/bus/pci/devices/0000\:00\:00.0/config
6761-rwxrwxrwx 1 root root 4096 Jul 26 08:55 /sys/bus/pci/devices/0000:00:00.0/config
6762root@VP88x_2017_3_PRJ0191:~# echo 1 > /sys/bus/pci/rescan
6763[ 249.763023] pci 0000:00:00.0: PCI bridge to [bus 01-0c]
6764root@VP88x_2017_3_PRJ0191:~# echo 1 > /sys/bus/pci/rescan
6765[ 251.866870] pci 0000:00:00.0: PCI bridge to [bus 01-0c]
6766root@VP88x_2017_3_PRJ0191:~# ls -al /sys/bus/pci/devices/0000\:00\:00.0
67670000:00:00.0/
6768root@VP88x_2017_3_PRJ0191:~# ls -al /sys/bus/pci/devices/0000\:00\:00.0
67690000:00:00.0/
6770root@VP88x_2017_3_PRJ0191:~# Fmc134APP 0 1 1 1 1
6771UnitAPI version : 1.3.8 : Enumerating units in the system, please wait...
6772
6773unitapi_auto_config returned -50
6774
6775Invalid device handle '1'
6776Press a key to exit the application
6777^C
6778root@VP88x_2017_3_PRJ0191:~# Xilinx Zynq MP First Stage Boot Loader
6779Release 2017.3 May 24 2018 - 10:35:53
6780Marvell PHY reset
6781SI5338 0x70 not configured
6782SI5338 0x70 configuration finished
6783SI5338 0x71 not configured
6784SI5338 0x71 configuration finished
6785
6786
6787U-Boot 2017.01 (Jul 26 2018 - 02:50:11 -0600) Xilinx ZynqMP ZCU102 revB
6788
6789I2C: ready
6790DRAM: 2 GiB
6791EL Level: EL2
6792Chip ID: xczu3eg
6793MMC: Card did not respond to voltage select!
6794sdhci@ff160000 - probe failed: -95
6795Card did not respond to voltage select!
6796
6797zynqmp_qspi_ofdata_to_platdata: CLK 300000000
6798SF: Detected n25q1024 with page size 256 Bytes, erase size 64 KiB, total 128 MiB
6799*** Warning - bad CRC, using default environment
6800
6801In: serial
6802Out: serial
6803Err: serial
6804Bootmode: QSPI_MODE
6805Net: ZYNQ GEM: ff0c0000, phyaddr c, interface rgmii-id
6806eth0: ethernet@ff0c0000
6807U-BOOT for VP88x_2017_3_PRJ0191
6808
6809Hit any key to stop autoboot: 0
6810SF: Detected n25q1024 with page size 256 Bytes, erase size 64 KiB, total 128 MiB
6811device 0 offset 0x540000, size 0x2200000
6812SF: 35651584 bytes @ 0x540000 Read: OK
6813## Loading kernel from FIT Image at 10000000 ...
6814 Using 'conf@1' configuration
6815 Trying 'kernel@0' kernel subimage
6816 Description: Linux Kernel
6817 Type: Kernel Image
6818 Compression: uncompressed
6819 Data Start: 0x100000d8
6820 Data Size: 12503552 Bytes = 11.9 MiB
6821 Architecture: AArch64
6822 OS: Linux
6823 Load Address: 0x00080000
6824 Entry Point: 0x00080000
6825 Hash algo: sha1
6826 Hash value: 6738559f9c7602fa2a0ff36fdfc8cf5b9b3e6565
6827 Verifying Hash Integrity ... sha1+ OK
6828## Loading ramdisk from FIT Image at 10000000 ...
6829 Using 'conf@1' configuration
6830 Trying 'ramdisk@0' ramdisk subimage
6831 Description: ramdisk
6832 Type: RAMDisk Image
6833 Compression: uncompressed
6834 Data Start: 0x10bf54e4
6835 Data Size: 8973721 Bytes = 8.6 MiB
6836 Architecture: AArch64
6837 OS: Linux
6838 Load Address: unavailable
6839 Entry Point: unavailable
6840 Hash algo: sha1
6841 Hash value: 4b595c4e0c42ac8967d3d732b389c6521f0b492f
6842 Verifying Hash Integrity ... sha1+ OK
6843## Loading fdt from FIT Image at 10000000 ...
6844 Using 'conf@1' configuration
6845 Trying 'fdt@0' fdt subimage
6846 Description: Flattened Device Tree blob
6847 Type: Flat Device Tree
6848 Compression: uncompressed
6849 Data Start: 0x10becbd0
6850 Data Size: 34910 Bytes = 34.1 KiB
6851 Architecture: AArch64
6852 Hash algo: sha1
6853 Hash value: 20fc450d3d82f1967aba254f93c3704b6f5d1f6e
6854 Verifying Hash Integrity ... sha1+ OK
6855 Booting using the fdt blob at 0x10becbd0
6856 Loading Kernel Image ... OK
6857 Loading Ramdisk to 07771000, end 07fffd99 ... OK
6858 Loading Device Tree to 0000000007765000, end 000000000777085d ... OK
6859
6860Starting kernel ...
6861
6862[ 0.000000] Booting Linux on physical CPU 0x0
6863[ 0.000000] Linux version 4.9.0 (user@user-VirtualBox) (gcc version 6.2.1 20161016 (Linaro GCC 6.2-2016.11) ) #1 SMP Thu Jul 26 01:50:46 MDT 2018
6864[ 0.000000] Boot CPU: AArch64 Processor [410fd034]
6865[ 0.000000] earlycon: cdns0 at MMIO 0x00000000ff010000 (options '115200n8')
6866[ 0.000000] bootconsole [cdns0] enabled
6867[ 0.000000] efi: Getting EFI parameters from FDT:
6868[ 0.000000] efi: UEFI not found.
6869[ 0.000000] cma: Reserved 512 MiB at 0x0000000060000000
6870[ 0.000000] psci: probing for conduit method from DT.
6871[ 0.000000] psci: PSCIv1.0 detected in firmware.
6872[ 0.000000] psci: Using standard PSCI v0.2 function IDs
6873[ 0.000000] psci: MIGRATE_INFO_TYPE not supported.
6874[ 0.000000] percpu: Embedded 21 pages/cpu @ffffffc05ff76000 s46232 r8192 d31592 u86016
6875[ 0.000000] Detected VIPT I-cache on CPU0
6876[ 0.000000] CPU features: enabling workaround for ARM erratum 845719
6877[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 517120
6878[ 0.000000] Kernel command line: console=ttyPS0,115200 earlyprintk earlycon=cdns,mmio,0xFF010000,115200n8 uio_pdrv_genirq.of_id=generic-uio clk_ignore_unused cma=512M coherent_pool=64MiB
6879[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
6880[ 0.000000] Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes)
6881[ 0.000000] Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes)
6882[ 0.000000] Memory: 1519128K/2097152K available (8508K kernel code, 562K rwdata, 2636K rodata, 448K init, 382K bss, 53736K reserved, 524288K cma-reserved)
6883[ 0.000000] Virtual kernel memory layout:
6884[ 0.000000] modules : 0xffffff8000000000 - 0xffffff8008000000 ( 128 MB)
6885[ 0.000000] vmalloc : 0xffffff8008000000 - 0xffffffbebfff0000 ( 250 GB)
6886[ 0.000000] .text : 0xffffff8008080000 - 0xffffff80088d0000 ( 8512 KB)
6887[ 0.000000] .rodata : 0xffffff80088d0000 - 0xffffff8008b70000 ( 2688 KB)
6888[ 0.000000] .init : 0xffffff8008b70000 - 0xffffff8008be0000 ( 448 KB)
6889[ 0.000000] .data : 0xffffff8008be0000 - 0xffffff8008c6ca00 ( 563 KB)
6890[ 0.000000] .bss : 0xffffff8008c6ca00 - 0xffffff8008ccc434 ( 383 KB)
6891[ 0.000000] fixed : 0xffffffbefe7fd000 - 0xffffffbefec00000 ( 4108 KB)
6892[ 0.000000] PCI I/O : 0xffffffbefee00000 - 0xffffffbeffe00000 ( 16 MB)
6893[ 0.000000] vmemmap : 0xffffffbf00000000 - 0xffffffc000000000 ( 4 GB maximum)
6894[ 0.000000] 0xffffffbf00000000 - 0xffffffbf01c00000 ( 28 MB actual)
6895[ 0.000000] memory : 0xffffffc000000000 - 0xffffffc080000000 ( 2048 MB)
6896[ 0.000000] Hierarchical RCU implementation.
6897[ 0.000000] Build-time adjustment of leaf fanout to 64.
6898[ 0.000000] RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=4.
6899[ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=64, nr_cpu_ids=4
6900[ 0.000000] NR_IRQS:64 nr_irqs:64 0
6901[ 0.000000] GIC: Adjusting CPU interface base to 0x00000000f902f000
6902[ 0.000000] GIC: Using split EOI/Deactivate mode
6903[ 0.000000] arm_arch_timer: Architected cp15 timer(s) running at 50.00MHz (phys).
6904[ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0xb8812736b, max_idle_ns: 440795202655 ns
6905[ 0.000003] sched_clock: 56 bits at 50MHz, resolution 20ns, wraps every 4398046511100ns
6906[ 0.008251] Console: colour dummy device 80x25
6907[ 0.012521] Calibrating delay loop (skipped), value calculated using timer frequency.. 100.00 BogoMIPS (lpj=200000)
6908[ 0.022878] pid_max: default: 32768 minimum: 301
6909[ 0.027569] Mount-cache hash table entries: 4096 (order: 3, 32768 bytes)
6910[ 0.034128] Mountpoint-cache hash table entries: 4096 (order: 3, 32768 bytes)
6911[ 0.041858] ASID allocator initialised with 65536 entries
6912[ 0.047557] zynqmp_plat_init Power management API v0.3
6913[ 0.052568] EFI services will not be available.
6914[ 0.057335] Detected VIPT I-cache on CPU1
6915[ 0.057369] CPU1: Booted secondary processor [410fd034]
6916[ 0.057630] Detected VIPT I-cache on CPU2
6917[ 0.057647] CPU2: Booted secondary processor [410fd034]
6918[ 0.057895] Detected VIPT I-cache on CPU3
6919[ 0.057912] CPU3: Booted secondary processor [410fd034]
6920[ 0.057944] Brought up 4 CPUs
6921[ 0.088228] SMP: Total of 4 processors activated.
6922[ 0.092904] CPU features: detected feature: 32-bit EL0 Support
6923[ 0.098701] CPU: All CPU(s) started at EL2
6924[ 0.102773] alternatives: patching kernel code
6925[ 0.108036] devtmpfs: initialized
6926[ 0.115568] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
6927[ 0.136593] xor: measuring software checksum speed
6928[ 0.181264] 8regs : 2543.000 MB/sec
6929[ 0.221287] 8regs_prefetch: 2266.000 MB/sec
6930[ 0.265656] 32regs : 3125.000 MB/sec
6931[ 0.305683] 32regs_prefetch: 2627.000 MB/sec
6932[ 0.310104] xor: using function: 32regs (3125.000 MB/sec)
6933[ 0.315561] pinctrl core: initialized pinctrl subsystem
6934[ 0.321239] NET: Registered protocol family 16
6935[ 0.326399] Failed to initialise IOMMU /amba/smmu@fd800000
6936[ 0.331895] vdso: 2 pages (1 code @ ffffff80088d7000, 1 data @ ffffff8008be4000)
6937[ 0.339100] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers.
6938[ 0.374389] DMA: preallocated 65536 KiB pool for atomic allocations
6939[ 0.390808] reset_zynqmp reset-controller: Xilinx zynqmp reset driver probed
6940[ 0.398289] ARM CCI_400_r1 PMU driver probed[ 0.405065] zynqmp-pinctrl ff180000.pinctrl: zynqmp pinctrl initialized
6941[ 0.431770] HugeTLB registered 2 MB page size, pre-allocated 0 pages
6942[ 0.504946] raid6: int64x1 gen() 447 MB/s
6943[ 0.576910] raid6: int64x1 xor() 485 MB/s
6944[ 0.648950] raid6: int64x2 gen() 740 MB/s
6945[ 0.721005] raid6: int64x2 xor() 661 MB/s
6946[ 0.793067] raid6: int64x4 gen() 1086 MB/s
6947[ 0.865094] raid6: int64x4 xor() 816 MB/s
6948[ 0.937146] raid6: int64x8 gen() 1266 MB/s
6949[ 1.009198] raid6: int64x8 xor() 824 MB/s
6950[ 1.081231] raid6: neonx1 gen() 797 MB/s
6951[ 1.153252] raid6: neonx1 xor() 837 MB/s
6952[ 1.225316] raid6: neonx2 gen() 1286 MB/s
6953[ 1.297348] raid6: neonx2 xor() 1129 MB/s
6954[ 1.369395] raid6: neonx4 gen() 1663 MB/s
6955[ 1.441420] raid6: neonx4 xor() 1306 MB/s
6956[ 1.513466] raid6: neonx8 gen() 1752 MB/s
6957[ 1.585524] raid6: neonx8 xor() 1349 MB/s
6958[ 1.589603] raid6: using algorithm neonx8 gen() 1752 MB/s
6959[ 1.594965] raid6: .... xor() 1349 MB/s, rmw enabled
6960[ 1.599896] raid6: using intx1 recovery algorithm
6961[ 1.605061] Write failed gate address:1000f02
6962[ 1.612960] SCSI subsystem initialized
6963[ 1.616761] usbcore: registered new interface driver usbfs
6964[ 1.622095] usbcore: registered new interface driver hub
6965[ 1.627369] usbcore: registered new device driver usb
6966[ 1.632415] media: Linux media interface: v0.10
6967[ 1.636867] Linux video capture interface: v2.00
6968[ 1.641451] pps_core: LinuxPPS API ver. 1 registered
6969[ 1.646356] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
6970[ 1.655448] PTP clock support registered
6971[ 1.659350] EDAC MC: Ver: 3.0.0
6972[ 1.662726] FPGA manager framework
6973[ 1.666070] fpga-region fpga-full: FPGA Region probed
6974[ 1.671084] Advanced Linux Sound Architecture Driver Initialized.
6975[ 1.677326] Bluetooth: Core ver 2.22
6976[ 1.680736] NET: Registered protocol family 31
6977[ 1.685127] Bluetooth: HCI device and connection manager initialized
6978[ 1.691444] Bluetooth: HCI socket layer initialized
6979[ 1.696287] Bluetooth: L2CAP socket layer initialized
6980[ 1.701312] Bluetooth: SCO socket layer initialized
6981[ 1.706735] clocksource: Switched to clocksource arch_sys_counter
6982[ 1.712735] VFS: Disk quotas dquot_6.6.0
6983[ 1.716578] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
6984[ 1.726817] NET: Registered protocol family 2
6985[ 1.731356] TCP established hash table entries: 16384 (order: 5, 131072 bytes)
6986[ 1.738475] TCP bind hash table entries: 16384 (order: 6, 262144 bytes)
6987[ 1.745255] TCP: Hash tables configured (established 16384 bind 16384)
6988[ 1.751650] UDP hash table entries: 1024 (order: 3, 32768 bytes)
6989[ 1.757586] UDP-Lite hash table entries: 1024 (order: 3, 32768 bytes)
6990[ 1.764098] NET: Registered protocol family 1
6991[ 1.768551] RPC: Registered named UNIX socket transport module.
6992[ 1.774287] RPC: Registered udp transport module.
6993[ 1.778944] RPC: Registered tcp transport module.
6994[ 1.783614] RPC: Registered tcp NFSv4.1 backchannel transport module.
6995[ 1.790173] Trying to unpack rootfs image as initramfs...
6996[ 2.113669] Freeing initrd memory: 8760K (ffffffc007771000 - ffffffc007fff000)
6997[ 2.121089] hw perfevents: enabled with armv8_pmuv3 PMU driver, 7 counters available
6998[ 2.129397] futex hash table entries: 1024 (order: 5, 131072 bytes)
6999[ 2.136049] workingset: timestamp_bits=62 max_order=19 bucket_order=0
7000[ 2.142984] NFS: Registering the id_resolver key type
7001[ 2.147860] Key type id_resolver registered
7002[ 2.152002] Key type id_legacy registered
7003[ 2.155979] nfs4filelayout_init: NFSv4 File Layout Driver Registering...
7004[ 2.162649] ntfs: driver 2.1.32 [Flags: R/W].
7005[ 2.166977] jffs2: version 2.2. (NAND) (SUMMARY) © 2001-2006 Red Hat, Inc.
7006[ 2.181813] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 247)
7007[ 2.189029] io scheduler noop registered
7008[ 2.192933] io scheduler deadline registered
7009[ 2.197155] io scheduler cfq registered (default)
7010[ 2.202417] nwl-pcie fd0e0000.pcie: Link is UP
7011[ 2.206709] OF: PCI: host bridge /amba/pcie@fd0e0000 ranges:
7012[ 2.212311] OF: PCI: MEM 0xe0000000..0xefffffff -> 0xe0000000
7013[ 2.218178] OF: PCI: MEM 0x600000000..0x7ffffffff -> 0x600000000
7014[ 2.224402] nwl-pcie fd0e0000.pcie: PCI host bridge to bus 0000:00
7015[ 2.230465] pci_bus 0000:00: root bus resource [bus 00-ff]
7016[ 2.235910] pci_bus 0000:00: root bus resource [mem 0xe0000000-0xefffffff]
7017[ 2.242747] pci_bus 0000:00: root bus resource [mem 0x600000000-0x7ffffffff pref]
7018[ 2.250672] pci 0000:00:00.0: BAR 8: assigned [mem 0xe0000000-0xe00fffff]
7019[ 2.257270] pci 0000:01:00.0: BAR 0: assigned [mem 0xe0000000-0xe00007ff]
7020[ 2.264018] pci 0000:00:00.0: PCI bridge to [bus 01-0c]
7021[ 2.269205] pci 0000:00:00.0: bridge window [mem 0xe0000000-0xe00fffff]
7022[ 2.276677] xilinx-dpdma fd4c0000.dma: Xilinx DPDMA engine is probed
7023[ 2.283047] xilinx-vdma 400000000.dma: Xilinx AXI VDMA Engine Driver Probed!!
7024[ 2.290096] xilinx-vdma 400010000.dma: Xilinx AXI VDMA Engine Driver Probed!!
7025[ 2.297252] xilinx-zynqmp-dma fd500000.dma: ZynqMP DMA driver Probe success
7026[ 2.304117] xilinx-zynqmp-dma fd510000.dma: ZynqMP DMA driver Probe success
7027[ 2.311033] xilinx-zynqmp-dma fd520000.dma: ZynqMP DMA driver Probe success
7028[ 2.317960] xilinx-zynqmp-dma fd530000.dma: ZynqMP DMA driver Probe success
7029[ 2.324880] xilinx-zynqmp-dma fd540000.dma: ZynqMP DMA driver Probe success
7030[ 2.331797] xilinx-zynqmp-dma fd550000.dma: ZynqMP DMA driver Probe success
7031[ 2.338719] xilinx-zynqmp-dma fd560000.dma: ZynqMP DMA driver Probe success
7032[ 2.345638] xilinx-zynqmp-dma fd570000.dma: ZynqMP DMA driver Probe success
7033[ 2.352598] xilinx-zynqmp-dma ffa80000.dma: ZynqMP DMA driver Probe success
7034[ 2.359485] xilinx-zynqmp-dma ffa90000.dma: ZynqMP DMA driver Probe success
7035[ 2.366397] xilinx-zynqmp-dma ffaa0000.dma: ZynqMP DMA driver Probe success
7036[ 2.373318] xilinx-zynqmp-dma ffab0000.dma: ZynqMP DMA driver Probe success
7037[ 2.380239] xilinx-zynqmp-dma ffac0000.dma: ZynqMP DMA driver Probe success
7038[ 2.387159] xilinx-zynqmp-dma ffad0000.dma: ZynqMP DMA driver Probe success
7039[ 2.394081] xilinx-zynqmp-dma ffae0000.dma: ZynqMP DMA driver Probe success
7040[ 2.401001] xilinx-zynqmp-dma ffaf0000.dma: ZynqMP DMA driver Probe success
7041[ 2.429368] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
7042[ 2.436852] ff000000.serial: ttyPS1 at MMIO 0xff000000 (irq = 46, base_baud = 6250000) is a xuartps
7043[ 2.445869] ff010000.serial: ttyPS0 at MMIO 0xff010000 (irq = 47, base_baud =·r¢ª¢?Êêconsole [ttyPS0] enabled
7044[ 2.454819] console [ttyPS0] enabled
7045[ 2.461777] bootconsole [cdns0] disabled
7046[ 2.461777] bootconsole [cdns0] disabled
7047[ 2.469812] Unable to detect cache hierarchy from DT for CPU 0
7048[ 2.480248] brd: module loaded
7049[ 2.486106] loop: module loaded
7050[ 2.490073] ahci-ceva fd0c0000.ahci: AHCI 0001.0301 32 slots 2 ports 6 Gbps 0x3 impl platform mode
7051[ 2.498952] ahci-ceva fd0c0000.ahci: flags: 64bit ncq sntf pm clo only pmp fbs pio slum part ccc sds apst
7052[ 2.509681] scsi host0: ahci-ceva
7053[ 2.513099] scsi host1: ahci-ceva
7054[ 2.516443] ata1: SATA max UDMA/133 mmio [mem 0xfd0c0000-0xfd0c1fff] port 0x100 irq 43
7055[ 2.524274] ata2: SATA max UDMA/133 mmio [mem 0xfd0c0000-0xfd0c1fff] port 0x180 irq 43
7056[ 2.532345] mtdoops: mtd device (mtddev=name/number) must be supplied
7057[ 2.539692] zynqmp-qspi ff0f0000.spi: rx bus width not found
7058[ 2.545618] m25p80 spi0.0: found n25q00, expected n25q512a
7059[ 2.551343] m25p80 spi0.0: n25q00 (131072 Kbytes)
7060[ 2.555984] 5 ofpart partitions found on MTD device spi0.0
7061[ 2.561432] Creating 5 MTD partitions on "spi0.0":
7062[ 2.566208] 0x000000000000-0x000000500000 : "boot"
7063[ 2.571461] 0x000000500000-0x000000540000 : "bootenv"
7064[ 2.576839] 0x000000540000-0x000002740000 : "kernel"
7065[ 2.582123] 0x000002740000-0x000003740000 : "user"
7066[ 2.587240] 0x000003740000-0x000003750000 : "test"
7067[ 2.593194] libphy: Fixed MDIO Bus: probed
7068[ 2.598284] tun: Universal TUN/TAP device driver, 1.6
7069[ 2.603255] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
7070[ 2.609529] CAN device driver interface
7071[ 2.613850] macb ff0c0000.ethernet: Not enabling partial store and forward
7072[ 2.621157] libphy: MACB_mii_bus: probed
7073[ 2.699008] macb ff0c0000.ethernet eth0: Cadence GEM rev 0x50070106 at 0xff0c0000 irq 30 (00:0a:35:00:22:01)
7074[ 2.708755] Marvell 88E1510 ff0c0000.etherne:00: attached PHY driver [Marvell 88E1510] (mii_bus:phy_addr=ff0c0000.etherne:00, irq=-1)
7075[ 2.721342] usbcore: registered new interface driver asix
7076[ 2.726711] usbcore: registered new interface driver ax88179_178a
7077[ 2.732757] usbcore: registered new interface driver cdc_ether
7078[ 2.738571] usbcore: registered new interface driver net1080
7079[ 2.744213] usbcore: registered new interface driver cdc_subset
7080[ 2.750114] usbcore: registered new interface driver zaurus
7081[ 2.755684] usbcore: registered new interface driver cdc_ncm
7082[ 2.761638] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
7083[ 2.768078] ehci-pci: EHCI PCI platform driver
7084[ 2.772735] usbcore: registered new interface driver uas
7085[ 2.778000] usbcore: registered new interface driver usb-storage
7086[ 2.784250] mousedev: PS/2 mouse device common for all mice
7087[ 2.790138] rtc_zynqmp ffa60000.rtc: rtc core: registered ffa60000.rtc as rtc0
7088[ 2.797309] i2c /dev entries driver
7089[ 2.800938] cdns-i2c ff020000.i2c: 400 kHz mmio ff020000 irq 32
7090[ 2.806985] cdns-i2c ff030000.i2c: 400 kHz mmio ff030000 irq 33
7091[ 2.813740] usbcore: registered new interface driver uvcvideo
7092[ 2.819405] USB Video Class driver (1.1.1)
7093[ 2.823849] Bluetooth: HCI UART driver ver 2.3
7094[ 2.828209] Bluetooth: HCI UART protocol H4 registered
7095[ 2.833325] Bluetooth: HCI UART protocol BCSP registered
7096[ 2.838619] Bluetooth: HCI UART protocol LL registered
7097[ 2.843739] Bluetooth: HCI UART protocol ATH3K registered
7098[ 2.849121] Bluetooth: HCI UART protocol Three-wire (H5) registered
7099[ 2.852943] ata2: SATA link down (SStatus 0 SControl 330)
7100[ 2.852984] ata1: SATA link down (SStatus 0 SControl 330)
7101[ 2.866170] Bluetooth: HCI UART protocol Intel registered
7102[ 2.871551] Bluetooth: HCI UART protocol Broadcom registered
7103[ 2.877158] Bluetooth: HCI UART protocol QCA registered
7104[ 2.882399] usbcore: registered new interface driver bcm203x
7105[ 2.888042] usbcore: registered new interface driver bpa10x
7106[ 2.893595] usbcore: registered new interface driver bfusb
7107[ 2.899063] usbcore: registered new interface driver btusb
7108[ 2.904501] Bluetooth: Generic Bluetooth SDIO driver ver 0.1
7109[ 2.910195] usbcore: registered new interface driver ath3k
7110[ 2.915729] EDAC MC: ECC not enabled
7111[ 2.919359] EDAC DEVICE0: Giving out device to module edac controller cache_err: DEV edac (POLLED)
7112[ 2.928393] EDAC DEVICE1: Giving out device to module zynqmp-ocm-edac controller zynqmp_ocm: DEV ff960000.memory-controller (INTERRUPT)
7113[ 2.940684] sdhci: Secure Digital Host Controller Interface driver
7114[ 2.946781] sdhci: Copyright(c) Pierre Ossman
7115[ 2.951119] sdhci-pltfm: SDHCI platform and OF driver helper
7116[ 3.002745] mmc0: SDHCI controller on ff160000.sdhci [ff160000.sdhci] using ADMA 64-bit
7117[ 3.010871] ledtrig-cpu: registered to indicate activity on CPUs
7118[ 3.016925] usbcore: registered new interface driver usbhid
7119[ 3.022409] usbhid: USB HID core driver
7120[ 3.027804] fpga_manager fpga0: Xilinx ZynqMP FPGA Manager registered
7121[ 3.034694] xilinx-dp-snd-pcm dp_snd_pcm0: Xilinx DisplayPort Sound PCM probed
7122[ 3.041857] xilinx-dp-snd-pcm dp_snd_pcm1: Xilinx DisplayPort Sound PCM probed
7123[ 3.049208] PLL: shutdown
7124[ 3.052641] Write failed to divider address:fd1a007c
7125[ 3.057678] PLL: enable
7126[ 3.060201] xilinx-dp-snd-codec dp_snd_codec0: Xilinx DisplayPort Sound Codec probed
7127[ 3.068248] xilinx-dp-snd-card dp_snd_card: xilinx-dp-snd-codec-dai <-> xilinx-dp-snd-codec-dai mapping ok
7128[ 3.077921] xilinx-dp-snd-card dp_snd_card: xilinx-dp-snd-codec-dai <-> xilinx-dp-snd-codec-dai mapping ok
7129[ 3.087760] xilinx-dp-snd-card dp_snd_card: Xilinx DisplayPort Sound Card probed
7130[ 3.095177] pktgen: Packet Generator for packet performance testing. Version: 2.75
7131[ 3.102849] Netfilter messages via NETLINK v0.30.
7132[ 3.107601] ip_tables: (C) 2000-2006 Netfilter Core Team
7133[ 3.112879] Initializing XFRM netlink socket
7134[ 3.117192] NET: Registered protocol family 10
7135[ 3.122034] ip6_tables: (C) 2000-2006 Netfilter Core Team
7136[ 3.127387] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver
7137[ 3.133600] NET: Registered protocol family 17
7138[ 3.137970] NET: Registered protocol family 15
7139[ 3.142395] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this.
7140[ 3.155322] Ebtables v2.0 registered
7141[ 3.158933] can: controller area network core (rev 20120528 abi 9)
7142[ 3.165078] NET: Registered protocol family 29
7143[ 3.169468] can: raw protocol (rev 20120528)
7144[ 3.173719] can: broadcast manager protocol (rev 20161123 t)
7145[ 3.179363] can: netlink gateway (rev 20130117) max_hops=1
7146[ 3.184882] Bluetooth: RFCOMM TTY layer initialized
7147[ 3.189698] Bluetooth: RFCOMM socket layer initialized
7148[ 3.194822] Bluetooth: RFCOMM ver 1.11
7149[ 3.198542] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
7150[ 3.203841] Bluetooth: BNEP filters: protocol multicast
7151[ 3.209054] Bluetooth: BNEP socket layer initialized
7152[ 3.213995] Bluetooth: HIDP (Human Interface Emulation) ver 1.2
7153[ 3.219899] Bluetooth: HIDP socket layer initialized
7154[ 3.225027] 9pnet: Installing 9P2000 support
7155[ 3.229229] Key type dns_resolver registered
7156[ 3.235884] registered taskstats version 1
7157[ 3.243131] Btrfs loaded, crc32c=crc32c-generic
7158[ 3.264841] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller
7159[ 3.270269] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 1
7160[ 3.280163] xhci-hcd xhci-hcd.0.auto: hcc params 0x0238f625 hci version 0x100 quirks 0x02010010
7161[ 3.290828] xhci-hcd xhci-hcd.0.auto: irq 229, io mem 0xfe300000
7162[ 3.298881] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
7163[ 3.307602] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
7164[ 3.314738] usb usb1: Product: xHCI Host Controller
7165[ 3.319596] usb usb1: Manufacturer: Linux 4.9.0 xhci-hcd
7166[ 3.324890] usb usb1: SerialNumber: xhci-hcd.0.auto
7167[ 3.331997] hub 1-0:1.0: USB hub found
7168[ 3.335692] hub 1-0:1.0: 1 port detected
7169[ 3.339689] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller
7170[ 3.345095] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 2
7171[ 3.352767] usb usb2: We don't know the algorithms for LPM for this host, disabling LPM.
7172[ 3.360866] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003
7173[ 3.367572] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
7174[ 3.374774] usb usb2: Product: xHCI Host Controller
7175[ 3.381643] usb usb2: Manufacturer: Linux 4.9.0 xhci-hcd
7176[ 3.388872] usb usb2: SerialNumber: xhci-hcd.0.auto
7177[ 3.393893] hub 2-0:1.0: USB hub found
7178[ 3.397575] hub 2-0:1.0: 1 port detected
7179[ 3.403854] rtc_zynqmp ffa60000.rtc: setting system clock to 1970-01-01 00:00:15 UTC (15)
7180[ 3.414063] clk: Not disabling unused clocks
7181[ 3.418253] ALSA device list:
7182[ 3.421195] #0: DisplayPort monitor
7183[ 3.425464] Freeing unused kernel memory: 448K (ffffffc000b70000 - ffffffc000be0000)
7184INIT: version 2.88 booting
7185Starting udev
7186[ 3.540375] udevd[1613]: starting version 3.2
7187[ 3.545030] random: udevd: uninitialized urandom read (16 bytes read)
7188[ 3.551462] random: udevd: uninitialized urandom read (16 bytes read)
7189[ 3.557873] random: udevd: uninitialized urandom read (16 bytes read)
7190[ 3.564268] random: udevd: uninitialized urandom read (16 bytes read)
7191[ 3.574388] udevd[1614]: starting eudev-3.2
7192[ 3.617511] random: udevd: uninitialized urandom read (16 bytes read)
7193[ 3.627629] random: udevd: uninitialized urandom read (16 bytes read)
7194[ 3.637012] 4fm: loading out-of-tree module taints kernel.
7195[ 3.644182] pci 0000:00:00.0: enabling device (0000 -> 0002)
7196[ 3.649862] 4FM 0000:01:00.0: enabling device (0000 -> 0002)
7197[ 3.655465] Accessing 47232 of total 1 entries in dev->bar
7198[ 3.660983] dev->bar[u].virt_address:cf3d07c value:38011121
7199[ 3.664019] <dma1> init: registered
7200[ 3.669967] dev->bar[u].virt_address:cf3d080 value:deadbeef
7201[ 3.675528] dev->bar[u].virt_address:cf3d084 value:baadf00d
7202[ 3.681111] dev->bar[u].virt_address:cf3d088 value:eba00eba
7203[ 3.686635] dev->bar[u].virt_address:cf3d08c value:beefdeaf
7204[ 3.699038] <dma2> init: registered
7205[ 3.712511] /media/yocto4/vp880/VP88x_2017_3_PRJ0191/build/tmp/work/plnx_aarch64-xilinx-linux/4fm/1.0-r0/4fm.c: found 1 devices
7206Populating dev cache
7207[ 4.157145] random: dd: uninitialized urandom read (512 bytes read)
7208Thu Jul 26 08:51:43 UTC 2018
7209Starting internet superserver: inetd.
7210Running postinst /etc/rpm-postinsts/100-sysvinit-inittab...
7211update-rc.d: /etc/init.d/run-postinsts exists during rc.d purge (continuing)
7212INIT: Entering runlevel: 5
7213Hello World
7214[22]:0x12
7215[20]:0x201
7216[20]:0x201
7217[22]:0x1
7218[0]:0x140
7219[0]:0x140
7220Configuring network interfaces... [ 4.457216] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
7221done.
7222Starting Dropbear SSH server: [ 4.485943] random: dropbearkey: uninitialized urandom read (32 bytes read)
7223[ 4.496048] random: dropbearkey: uninitialized urandom read (32 bytes read)
7224Generating key, this may take a while...
7225[ 5.490854] macb ff0c0000.ethernet eth0: link up (1000/Full)
7226[ 5.496454] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
7227[ 6.903891] random: dropbearkey: uninitialized urandom read (32 bytes read)
7228Public key portion is:
7229ssh-rsa AAAAB3NzaC1yc2EAAAADAQABAAABAQCj9GFFEvbsnCcDkfTK8TF4/nE1KSQX4t6r+IF3nN/qu+k4HvGGUnXB95eSIFEBw3XchsOgF3aEJS/mG3OElsQfHfvVkWElr+EhGxoZPEZxtylzWBYsx3VubLj0iNVP6j5W3M/2wiWp0NSLi2oBUZhxHkoqICXpYRMccrCJSC9RL4xf0ZJPL5J/bmjFfaeJmUEitn5SlgJpmGY1TSdHeOpNgahK+KGhFk5vrXH4l58SudoyF9vCuRhbWR7P8RNv25rMlgbNa8K0pyHkDTmO/aLyoV2H2fuOrrLkEPUWXTKmYVjrzsgsIXeAU++NKbXnjJoMhj27H0S84Rc/vm13CJ6v root@VP88x_2017_3_PRJ0191
7230Fingerprint: md5 1b:a3:e8:96:a6:df:66:1d:4f:c4:06:c8:77:7a:e3:70
7231dropbear.
7232Starting syslogd/klogd: done
7233[ 6.957581] random: fast init done
7234[ 7.413732] random: crng init done
7235[ 9.213970] jffs2: notice: (2074) jffs2_build_xattr_subsystem: complete building xattr subsystem, 0 of xdatum (0 unchecked, 0 orphan) and 0 of xref (0 dead, 0 orphan) found.
7236hello world.....
7237Starting tcf-agent: OK
7238
7239root@VP88x_2017_3_PRJ0191:~# Fmc134APP 0 1 1 1 1
7240UnitAPI version : 1.3.8 : Enumerating units in the system, please wait...
7241
7242Global Units:
7243Global Unit 0 is on Device 'VP880' (P0): Internal Unit 0 is star 0x01C4 (axi_vp880_8l_host_if) with index 1 of star type 0x000D (Host Interface)
7244Global Unit 1 is on Device 'VP880' (P0): Internal Unit 1 is star 0x0203 (Unknown) with index 0 of star type 0x0005 (ADC)
7245Global Unit 2 is on Device 'VP880' (P0): Internal Unit 2 is star 0x015C (axi_intrc16) with index 0 of star type 0x0014 (Interrupt Controller)
7246Global Unit 3 is on Device 'VP880' (P0): Internal Unit 3 is star 0x014C (axi_i2c_master) with index 0 of star type 0x000E (3rd Party Logic)
7247Global Unit 4 is on Device 'VP880' (P0): Internal Unit 4 is star 0x0202 (Unknown) with index 0 of star type 0x0003 (Memory FIFO)
7248Global Unit 5 is on Device 'VP880' (P0): Internal Unit 5 is star 0x01C5 (axi_vp880_ddr4_fifo) with index 0 of star type 0x0003 (Memory FIFO)
7249
7250
7251Running 'VP880-FMC134' on PCIe, CID725
7252
7253-----------------------------------------------------------
7254Device 'VP880' (P0)
7255-----------------------------------------------------------
7256Constellation ID : 759
7257Number Of Stars : 19
7258Software Build Code: 1524177589 (Thu Apr 19 22:39:49 2018)
7259Firmware Build Code: 0
7260Firmware Revision : 1.2
7261-----------------------------------------------------------
7262
7263 - Unit 0 is VP88x host interface star
7264
7265-------- Onboard Monitoring (ADC Monitor) ---------
7266Temp ( AD7291 ) : OK (52.50C)
7267Vin0 ( ADC0 1.1Va ) : OK ( 1.13V)
7268Vin1 ( ADC0 1.1Vdig ) : OK ( 1.12V)
7269Vin2 ( ADC0 1.9Va ) : OK ( 1.92V)
7270Vin3 ( ADC1 1.1Va ) : OK ( 1.14V)
7271Vin4 ( ADC1 1.1Vdig ) : OK ( 1.13V)
7272Vin5 ( ADC1 1.9Va ) : OK ( 1.92V)
7273
7274Vin6 ( ADC0 raw ) : OK (0.685V)
7275Vin6 ( ADC0 Temp ) : OK (65.74C)
7276
7277Vin7 ( ADC1 raw ) : OK (0.685V)
7278Vin7 ( ADC1 Temp ) : OK (65.36C)
7279---------------------------------------------------
7280
7281
7282-------- Onboard Monitoring (Voltage Monitor) ---------
7283Temp ( AD7291 ) : OK (52.00C)
7284Vin0 ( 5.5Vosc ) : OK ( 5.50V)
7285Vin1 ( 3.3Vclk ) : OK ( 3.25V)
7286Vin2 ( 3.3Vlmx ) : OK ( 3.30V)
7287Vin3 ( 1.8Vcpld ) : OK ( 1.80V)
7288Vin4 ( Vadj ) : OK ( 1.81V)
7289Vin5 ( 3.3Vfmc ) : OK ( 3.25V)
7290Vin6 ( 12.0Vfmc ) : OK (11.95V)
7291Vin7 ( Viob ) : OK ( 1.81V)
7292-------------------------------------------------------
7293
7294Configuring clock tree ...
7295
7296
7297 Setting Clock_Mode
7298Internal Reference Mode
7299^C
7300root@VP88x_2017_3_PRJ0191:~# lspci -vvv
730100:00.0 PCI bridge: Xilinx Corporation Device d024 (prog-if 00 [Normal decode])
7302 Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
7303 Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
7304 Latency: 0
7305 Interrupt: pin A routed to IRQ 255
7306 Bus: primary=00, secondary=01, subordinate=0c, sec-latency=0
7307 I/O behind bridge: 00000000-00000fff
7308 Memory behind bridge: e0000000-e00fffff
7309 Prefetchable memory behind bridge: 00000000fff00000-00000000000fffff
7310 Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
7311 BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
7312 PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
7313 Capabilities: [40] Power Management version 3
7314 Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold-)
7315 Status: D0 NoSoftRst+ PME-Enable- DSel=0 DScale=0 PME-
7316 Capabilities: [60] Express (v2) Root Port (Slot-), MSI 00
7317 DevCap: MaxPayload 256 bytes, PhantFunc 0
7318 ExtTag- RBE+
7319 DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
7320 RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop+
7321 MaxPayload 128 bytes, MaxReadReq 512 bytes
7322 DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr- TransPend+
7323 LnkCap: Port #0, Speed 5GT/s, Width x2, ASPM not supported, Exit Latency L0s unlimited, L1 unlimited
7324 ClockPM- Surprise- LLActRep- BwNot+ ASPMOptComp+
7325 LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- CommClk-
7326 ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
7327 LnkSta: Speed 5GT/s, Width x2, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt+
7328 RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal- PMEIntEna- CRSVisible+
7329 RootCap: CRSVisible+
7330 RootSta: PME ReqID 0000, PMEStatus- PMEPending-
7331 DevCap2: Completion Timeout: Range B, TimeoutDis+, LTR-, OBFF Not Supported ARIFwd-
7332 DevCtl2: Completion Timeout: 50us to 50ms, TimeoutDis-, LTR-, OBFF Disabled ARIFwd-
7333 LnkCtl2: Target Link Speed: 5GT/s, EnterCompliance- SpeedDis-
7334 Transmit Margin: Normal Operating Range, EnterModifiedCompliance- ComplianceSOS-
7335 Compliance De-emphasis: -6dB
7336 LnkSta2: Current De-emphasis Level: -6dB, EqualizationComplete-, EqualizationPhase1-
7337 EqualizationPhase2-, EqualizationPhase3-, LinkEqualizationRequest-
7338 Capabilities: [100 v1] Device Serial Number 00-00-00-00-00-00-00-00
7339 Capabilities: [10c v1] Virtual Channel
7340 Caps: LPEVC=0 RefClk=100ns PATEntryBits=1
7341 Arb: Fixed- WRR32- WRR64- WRR128-
7342 Ctrl: ArbSelect=Fixed
7343 Status: InProgress-
7344 VC0: Caps: PATOffset=00 MaxTimeSlots=1 RejSnoopTrans-
7345 Arb: Fixed- WRR32- WRR64- WRR128- TWRR128- WRR256-
7346 Ctrl: Enable+ ID=0 ArbSelect=Fixed TC/VC=ff
7347 Status: NegoPending- InProgress-
7348 Capabilities: [128 v1] Vendor Specific Information: ID=1234 Rev=1 Len=018 <?>
7349
735001:00.0 Communication controller: Xilinx Corporation Device b880
7351 Subsystem: Xilinx Corporation Device b880
7352 Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
7353 Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
7354 Latency: 0
7355 Interrupt: pin A routed to IRQ 231
7356 Region 0: Memory at e0000000 (32-bit, non-prefetchable) [size=2K]
7357 Capabilities: [80] Power Management version 3
7358 Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
7359 Status: D0 NoSoftRst+ PME-Enable- DSel=0 DScale=0 PME-
7360 Capabilities: [90] MSI: Enable- Count=1/1 Maskable- 64bit+
7361 Address: 0000000000000000 Data: 0000
7362 Capabilities: [c0] Express (v2) Endpoint, MSI 00
7363 DevCap: MaxPayload 512 bytes, PhantFunc 0, Latency L0s <64ns, L1 <1us
7364 ExtTag- AttnBtn- AttnInd- PwrInd- RBE+ FLReset- SlotPowerLimit 0.000W
7365 DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
7366 RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop+
7367 MaxPayload 128 bytes, MaxReadReq 512 bytes
7368 DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr- TransPend-
7369 LnkCap: Port #0, Speed 8GT/s, Width x2, ASPM not supported, Exit Latency L0s unlimited, L1 unlimited
7370 ClockPM- Surprise- LLActRep- BwNot- ASPMOptComp+
7371 LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- CommClk-
7372 ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
7373 LnkSta: Speed 5GT/s, Width x2, TrErr- Train- SlotClk- DLActive- BWMgmt- ABWMgmt-
7374 DevCap2: Completion Timeout: Range B, TimeoutDis+, LTR-, OBFF Not Supported
7375 DevCtl2: Completion Timeout: 50us to 50ms, TimeoutDis-, LTR-, OBFF Disabled
7376 LnkCtl2: Target Link Speed: 8GT/s, EnterCompliance- SpeedDis-
7377 Transmit Margin: Normal Operating Range, EnterModifiedCompliance- ComplianceSOS-
7378 Compliance De-emphasis: -6dB
7379 LnkSta2: Current De-emphasis Level: -6dB, EqualizationComplete-, EqualizationPhase1-
7380 EqualizationPhase2-, EqualizationPhase3-, LinkEqualizationRequest-
7381 Capabilities: [100 v2] Advanced Error Reporting
7382 UESta: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol-
7383 UEMsk: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol-
7384 UESvrt: DLP+ SDES+ TLP- FCP+ CmpltTO- CmpltAbrt- UnxCmplt- RxOF+ MalfTLP+ ECRC- UnsupReq- ACSViol-
7385 CESta: RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr-
7386 CEMsk: RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr+
7387 AERCap: First Error Pointer: 00, GenCap- CGenEn- ChkCap- ChkEn-
7388 Capabilities: [300 v1] #19
7389 Kernel driver in use: 4FM
7390 Kernel modules: 4fm
7391
7392root@VP88x_2017_3_PRJ0191:~# echo 1 > /sys/bus/pci/res
7393rescan resource_alignment
7394root@VP88x_2017_3_PRJ0191:~# echo 1 > /sys/bus/pci/rescan
7395root@VP88x_2017_3_PRJ0191:~# lspci -vvv
739600:00.0 PCI bridge: Xilinx Corporation Device d024 (prog-if 00 [Normal decode])
7397 Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
7398 Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
7399 Latency: 0
7400 Interrupt: pin A routed to IRQ 255
7401 Bus: primary=00, secondary=01, subordinate=0c, sec-latency=0
7402 I/O behind bridge: 00000000-00000fff
7403 Memory behind bridge: e0000000-e00fffff
7404 Prefetchable memory behind bridge: 00000000fff00000-00000000000fffff
7405 Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
7406 BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
7407 PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
7408 Capabilities: [40] Power Management version 3
7409 Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold-)
7410 Status: D0 NoSoftRst+ PME-Enable- DSel=0 DScale=0 PME-
7411 Capabilities: [60] Express (v2) Root Port (Slot-), MSI 00
7412 DevCap: MaxPayload 256 bytes, PhantFunc 0
7413 ExtTag- RBE+
7414 DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
7415 RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop+
7416 MaxPayload 128 bytes, MaxReadReq 512 bytes
7417 DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr- TransPend+
7418 LnkCap: Port #0, Speed 5GT/s, Width x2, ASPM not supported, Exit Latency L0s unlimited, L1 unlimited
7419 ClockPM- Surprise- LLActRep- BwNot+ ASPMOptComp+
7420 LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- CommClk-
7421 ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
7422 LnkSta: Speed 5GT/s, Width x2, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt+
7423 RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal- PMEIntEna- CRSVisible+
7424 RootCap: CRSVisible+
7425 RootSta: PME ReqID 0000, PMEStatus- PMEPending-
7426 DevCap2: Completion Timeout: Range B, TimeoutDis+, LTR-, OBFF Not Supported ARIFwd-
7427 DevCtl2: Completion Timeout: 50us to 50ms, TimeoutDis-, LTR-, OBFF Disabled ARIFwd-
7428 LnkCtl2: Target Link Speed: 5GT/s, EnterCompliance- SpeedDis-
7429 Transmit Margin: Normal Operating Range, EnterModifiedCompliance- ComplianceSOS-
7430 Compliance De-emphasis: -6dB
7431 LnkSta2: Current De-emphasis Level: -6dB, EqualizationComplete-, EqualizationPhase1-
7432 EqualizationPhase2-, EqualizationPhase3-, LinkEqualizationRequest-
7433 Capabilities: [100 v1] Device Serial Number 00-00-00-00-00-00-00-00
7434 Capabilities: [10c v1] Virtual Channel
7435 Caps: LPEVC=0 RefClk=100ns PATEntryBits=1
7436 Arb: Fixed- WRR32- WRR64- WRR128-
7437 Ctrl: ArbSelect=Fixed
7438 Status: InProgress-
7439 VC0: Caps: PATOffset=00 MaxTimeSlots=1 RejSnoopTrans-
7440 Arb: Fixed- WRR32- WRR64- WRR128- TWRR128- WRR256-
7441 Ctrl: Enable+ ID=0 ArbSelect=Fixed TC/VC=ff
7442 Status: NegoPending- InProgress-
7443 Capabilities: [128 v1] Vendor Specific Information: ID=1234 Rev=1 Len=018 <?>
7444
744501:00.0 Communication controller: Xilinx Corporation Device b880
7446 Subsystem: Xilinx Corporation Device b880
7447 Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
7448 Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
7449 Latency: 0
7450 Interrupt: pin A routed to IRQ 231
7451 Region 0: Memory at e0000000 (32-bit, non-prefetchable) [size=2K]
7452 Capabilities: [80] Power Management version 3
7453 Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
7454 Status: D0 NoSoftRst+ PME-Enable- DSel=0 DScale=0 PME-
7455 Capabilities: [90] MSI: Enable- Count=1/1 Maskable- 64bit+
7456 Address: 0000000000000000 Data: 0000
7457 Capabilities: [c0] Express (v2) Endpoint, MSI 00
7458 DevCap: MaxPayload 512 bytes, PhantFunc 0, Latency L0s <64ns, L1 <1us
7459 ExtTag- AttnBtn- AttnInd- PwrInd- RBE+ FLReset- SlotPowerLimit 0.000W
7460 DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
7461 RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop+
7462 MaxPayload 128 bytes, MaxReadReq 512 bytes
7463 DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr- TransPend-
7464 LnkCap: Port #0, Speed 8GT/s, Width x2, ASPM not supported, Exit Latency L0s unlimited, L1 unlimited
7465 ClockPM- Surprise- LLActRep- BwNot- ASPMOptComp+
7466 LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- CommClk-
7467 ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
7468 LnkSta: Speed 5GT/s, Width x2, TrErr- Train- SlotClk- DLActive- BWMgmt- ABWMgmt-
7469 DevCap2: Completion Timeout: Range B, TimeoutDis+, LTR-, OBFF Not Supported
7470 DevCtl2: Completion Timeout: 50us to 50ms, TimeoutDis-, LTR-, OBFF Disabled
7471 LnkCtl2: Target Link Speed: 8GT/s, EnterCompliance- SpeedDis-
7472 Transmit Margin: Normal Operating Range, EnterModifiedCompliance- ComplianceSOS-
7473 Compliance De-emphasis: -6dB
7474 LnkSta2: Current De-emphasis Level: -6dB, EqualizationComplete-, EqualizationPhase1-
7475 EqualizationPhase2-, EqualizationPhase3-, LinkEqualizationRequest-
7476 Capabilities: [100 v2] Advanced Error Reporting
7477 UESta: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol-
7478 UEMsk: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol-
7479 UESvrt: DLP+ SDES+ TLP- FCP+ CmpltTO- CmpltAbrt- UnxCmplt- RxOF+ MalfTLP+ ECRC- UnsupReq- ACSViol-
7480 CESta: RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr-
7481 CEMsk: RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr+
7482 AERCap: First Error Pointer: 00, GenCap- CGenEn- ChkCap- ChkEn-
7483 Capabilities: [300 v1] #19
7484 Kernel driver in use: 4FM
7485 Kernel modules: 4fm
7486
7487root@VP88x_2017_3_PRJ0191:~# echo 1 > /sys/bus/pci/devices/0000\:01\:00.0/remove
7488root@VP88x_2017_3_PRJ0191:~# echo 1 > /sys/bus/pci/devices/0000\:00\:00.0/remove
7489
7490root@VP88x_2017_3_PRJ0191:~# echo 1 > /sys/bus/pci/rescan
7491[ 74.843505] pci 0000:00:00.0: BAR 8: assigned [mem 0xe0000000-0xe00fffff]
7492[ 74.850239] pci 0000:01:00.0: BAR 0: assigned [mem 0xe0000000-0xe00007ff]
7493[ 74.856990] pci 0000:00:00.0: PCI bridge to [bus 01-0c]
7494[ 74.862195] pci 0000:00:00.0: bridge window [mem 0xe0000000-0xe00fffff]
7495[ 74.869132] Accessing 47232 of total 1 entries in dev->bar
7496[ 74.874579] dev->bar[u].virt_address:cffd07c value:38011121
7497[ 74.880087] dev->bar[u].virt_address:cffd080 value:deadbeef
7498[ 74.885644] dev->bar[u].virt_address:cffd084 value:baadf00d
7499[ 74.891196] dev->bar[u].virt_address:cffd088 value:eba00eba
7500[ 74.896755] dev->bar[u].virt_address:cffd08c value:beefdeaf
7501root@VP88x_2017_3_PRJ0191:~# Fmc134APP 0 1 1 1 1
7502UnitAPI version : 1.3.8 : Enumerating units in the system, please wait...
7503
7504Global Units:
7505Global Unit 0 is on Device 'VP880' (P0): Internal Unit 0 is star 0x01C4 (axi_vp880_8l_host_if) with index 1 of star type 0x000D (Host Interface)
7506Global Unit 1 is on Device 'VP880' (P0): Internal Unit 1 is star 0x0203 (Unknown) with index 0 of star type 0x0005 (ADC)
7507Global Unit 2 is on Device 'VP880' (P0): Internal Unit 2 is star 0x015C (axi_intrc16) with index 0 of star type 0x0014 (Interrupt Controller)
7508Global Unit 3 is on Device 'VP880' (P0): Internal Unit 3 is star 0x014C (axi_i2c_master) with index 0 of star type 0x000E (3rd Party Logic)
7509Global Unit 4 is on Device 'VP880' (P0): Internal Unit 4 is star 0x0202 (Unknown) with index 0 of star type 0x0003 (Memory FIFO)
7510Global Unit 5 is on Device 'VP880' (P0): Internal Unit 5 is star 0x01C5 (axi_vp880_ddr4_fifo) with index 0 of star type 0x0003 (Memory FIFO)
7511
7512
7513Running 'VP880-FMC134' on PCIe, CID725
7514
7515-----------------------------------------------------------
7516Device 'VP880' (P0)
7517-----------------------------------------------------------
7518Constellation ID : 759
7519Number Of Stars : 19
7520Software Build Code: 1524177589 (Thu Apr 19 22:39:49 2018)
7521Firmware Build Code: 0
7522Firmware Revision : 1.2
7523-----------------------------------------------------------
7524
7525 - Unit 0 is VP88x host interface star
7526
7527-------- Onboard Monitoring (ADC Monitor) ---------
7528Temp ( AD7291 ) : OK (53.00C)
7529Vin0 ( ADC0 1.1Va ) : OK ( 1.13V)
7530Vin1 ( ADC0 1.1Vdig ) : OK ( 1.12V)
7531Vin2 ( ADC0 1.9Va ) : OK ( 1.92V)
7532Vin3 ( ADC1 1.1Va ) : OK ( 1.14V)
7533Vin4 ( ADC1 1.1Vdig ) : OK ( 1.13V)
7534Vin5 ( ADC1 1.9Va ) : OK ( 1.92V)
7535
7536Vin6 ( ADC0 raw ) : OK (0.684V)
7537Vin6 ( ADC0 Temp ) : OK (66.12C)
7538
7539Vin7 ( ADC1 raw ) : OK (0.685V)
7540Vin7 ( ADC1 Temp ) : OK (65.74C)
7541---------------------------------------------------
7542
7543
7544-------- Onboard Monitoring (Voltage Monitor) ---------
7545Temp ( AD7291 ) : OK (51.75C)
7546Vin0 ( 5.5Vosc ) : OK ( 5.50V)
7547Vin1 ( 3.3Vclk ) : OK ( 3.25V)
7548Vin2 ( 3.3Vlmx ) : OK ( 3.30V)
7549Vin3 ( 1.8Vcpld ) : OK ( 1.80V)
7550Vin4 ( Vadj ) : OK ( 1.81V)
7551Vin5 ( 3.3Vfmc ) : OK ( 3.25V)
7552Vin6 ( 12.0Vfmc ) : OK (11.95V)
7553Vin7 ( Viob ) : OK ( 1.81V)
7554-------------------------------------------------------
7555
7556Configuring clock tree ...
7557
7558
7559 Setting Clock_Mode
7560Internal Reference Mode
7561^C
7562root@VP88x_2017_3_PRJ0191:~# echo 1 > /sys/bus/pci/devices/0000\:01\:00.0/remove Xilinx Zynq MP First Stage Boot Loader
7563Release 2017.3 May 24 2018 - 10:35:53
7564Marvell PHY reset
7565SI5338 0x70 not configured
7566SI5338 0x70 configuration finished
7567SI5338 0x71 not configured
7568SI5338 0x71 configuration finished
7569
7570
7571U-Boot 2017.01 (Jul 26 2018 - 02:50:11 -0600) Xilinx ZynqMP ZCU102 revB
7572
7573I2C: ready
7574DRAM: 2 GiB
7575EL Level: EL2
7576Chip ID: xczu3eg
7577MMC: Card did not respond to voltage select!
7578sdhci@ff160000 - probe failed: -95
7579Card did not respond to voltage select!
7580
7581zynqmp_qspi_ofdata_to_platdata: CLK 300000000
7582SF: Detected n25q1024 with page size 256 Bytes, erase size 64 KiB, total 128 MiB
7583*** Warning - bad CRC, using default environment
7584
7585In: serial
7586Out: serial
7587Err: serial
7588Bootmode: QSPI_MODE
7589Net: ZYNQ GEM: ff0c0000, phyaddr c, interface rgmii-id
7590eth0: ethernet@ff0c0000
7591U-BOOT for VP88x_2017_3_PRJ0191
7592
7593Hit any key to stop autoboot: 0
7594SF: Detected n25q1024 with page size 256 Bytes, erase size 64 KiB, total 128 MiB
7595device 0 offset 0x540000, size 0x2200000
7596SF: 35651584 bytes @ 0x540000 Read: OK
7597## Loading kernel from FIT Image at 10000000 ...
7598 Using 'conf@1' configuration
7599 Trying 'kernel@0' kernel subimage
7600 Description: Linux Kernel
7601 Type: Kernel Image
7602 Compression: uncompressed
7603 Data Start: 0x100000d8
7604 Data Size: 12503552 Bytes = 11.9 MiB
7605 Architecture: AArch64
7606 OS: Linux
7607 Load Address: 0x00080000
7608 Entry Point: 0x00080000
7609 Hash algo: sha1
7610 Hash value: 6738559f9c7602fa2a0ff36fdfc8cf5b9b3e6565
7611 Verifying Hash Integrity ... sha1+ OK
7612## Loading ramdisk from FIT Image at 10000000 ...
7613 Using 'conf@1' configuration
7614 Trying 'ramdisk@0' ramdisk subimage
7615 Description: ramdisk
7616 Type: RAMDisk Image
7617 Compression: uncompressed
7618 Data Start: 0x10bf54e4
7619 Data Size: 8973721 Bytes = 8.6 MiB
7620 Architecture: AArch64
7621 OS: Linux
7622 Load Address: unavailable
7623 Entry Point: unavailable
7624 Hash algo: sha1
7625 Hash value: 4b595c4e0c42ac8967d3d732b389c6521f0b492f
7626 Verifying Hash Integrity ... sha1+ OK
7627## Loading fdt from FIT Image at 10000000 ...
7628 Using 'conf@1' configuration
7629 Trying 'fdt@0' fdt subimage
7630 Description: Flattened Device Tree blob
7631 Type: Flat Device Tree
7632 Compression: uncompressed
7633 Data Start: 0x10becbd0
7634 Data Size: 34910 Bytes = 34.1 KiB
7635 Architecture: AArch64
7636 Hash algo: sha1
7637 Hash value: 20fc450d3d82f1967aba254f93c3704b6f5d1f6e
7638 Verifying Hash Integrity ... sha1+ OK
7639 Booting using the fdt blob at 0x10becbd0
7640 Loading Kernel Image ... OK
7641 Loading Ramdisk to 07771000, end 07fffd99 ... OK
7642 Loading Device Tree to 0000000007765000, end 000000000777085d ... OK
7643
7644Starting kernel ...
7645
7646[ 0.000000] Booting Linux on physical CPU 0x0
7647[ 0.000000] Linux version 4.9.0 (user@user-VirtualBox) (gcc version 6.2.1 20161016 (Linaro GCC 6.2-2016.11) ) #1 SMP Thu Jul 26 01:50:46 MDT 2018
7648[ 0.000000] Boot CPU: AArch64 Processor [410fd034]
7649[ 0.000000] earlycon: cdns0 at MMIO 0x00000000ff010000 (options '115200n8')
7650[ 0.000000] bootconsole [cdns0] enabled
7651[ 0.000000] efi: Getting EFI parameters from FDT:
7652[ 0.000000] efi: UEFI not found.
7653[ 0.000000] cma: Reserved 512 MiB at 0x0000000060000000
7654[ 0.000000] psci: probing for conduit method from DT.
7655[ 0.000000] psci: PSCIv1.0 detected in firmware.
7656[ 0.000000] psci: Using standard PSCI v0.2 function IDs
7657[ 0.000000] psci: MIGRATE_INFO_TYPE not supported.
7658[ 0.000000] percpu: Embedded 21 pages/cpu @ffffffc05ff76000 s46232 r8192 d31592 u86016
7659[ 0.000000] Detected VIPT I-cache on CPU0
7660[ 0.000000] CPU features: enabling workaround for ARM erratum 845719
7661[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 517120
7662[ 0.000000] Kernel command line: console=ttyPS0,115200 earlyprintk earlycon=cdns,mmio,0xFF010000,115200n8 uio_pdrv_genirq.of_id=generic-uio clk_ignore_unused cma=512M coherent_pool=64MiB
7663[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
7664[ 0.000000] Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes)
7665[ 0.000000] Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes)
7666[ 0.000000] Memory: 1519128K/2097152K available (8508K kernel code, 562K rwdata, 2636K rodata, 448K init, 382K bss, 53736K reserved, 524288K cma-reserved)
7667[ 0.000000] Virtual kernel memory layout:
7668[ 0.000000] modules : 0xffffff8000000000 - 0xffffff8008000000 ( 128 MB)
7669[ 0.000000] vmalloc : 0xffffff8008000000 - 0xffffffbebfff0000 ( 250 GB)
7670[ 0.000000] .text : 0xffffff8008080000 - 0xffffff80088d0000 ( 8512 KB)
7671[ 0.000000] .rodata : 0xffffff80088d0000 - 0xffffff8008b70000 ( 2688 KB)
7672[ 0.000000] .init : 0xffffff8008b70000 - 0xffffff8008be0000 ( 448 KB)
7673[ 0.000000] .data : 0xffffff8008be0000 - 0xffffff8008c6ca00 ( 563 KB)
7674[ 0.000000] .bss : 0xffffff8008c6ca00 - 0xffffff8008ccc434 ( 383 KB)
7675[ 0.000000] fixed : 0xffffffbefe7fd000 - 0xffffffbefec00000 ( 4108 KB)
7676[ 0.000000] PCI I/O : 0xffffffbefee00000 - 0xffffffbeffe00000 ( 16 MB)
7677[ 0.000000] vmemmap : 0xffffffbf00000000 - 0xffffffc000000000 ( 4 GB maximum)
7678[ 0.000000] 0xffffffbf00000000 - 0xffffffbf01c00000 ( 28 MB actual)
7679[ 0.000000] memory : 0xffffffc000000000 - 0xffffffc080000000 ( 2048 MB)
7680[ 0.000000] Hierarchical RCU implementation.
7681[ 0.000000] Build-time adjustment of leaf fanout to 64.
7682[ 0.000000] RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=4.
7683[ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=64, nr_cpu_ids=4
7684[ 0.000000] NR_IRQS:64 nr_irqs:64 0
7685[ 0.000000] GIC: Adjusting CPU interface base to 0x00000000f902f000
7686[ 0.000000] GIC: Using split EOI/Deactivate mode
7687[ 0.000000] arm_arch_timer: Architected cp15 timer(s) running at 50.00MHz (phys).
7688[ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0xb8812736b, max_idle_ns: 440795202655 ns
7689[ 0.000002] sched_clock: 56 bits at 50MHz, resolution 20ns, wraps every 4398046511100ns
7690[ 0.008252] Console: colour dummy device 80x25
7691[ 0.012519] Calibrating delay loop (skipped), value calculated using timer frequency.. 100.00 BogoMIPS (lpj=200000)
7692[ 0.022877] pid_max: default: 32768 minimum: 301
7693[ 0.027569] Mount-cache hash table entries: 4096 (order: 3, 32768 bytes)
7694[ 0.034128] Mountpoint-cache hash table entries: 4096 (order: 3, 32768 bytes)
7695[ 0.041857] ASID allocator initialised with 65536 entries
7696[ 0.047551] zynqmp_plat_init Power management API v0.3
7697[ 0.052569] EFI services will not be available.
7698[ 0.057331] Detected VIPT I-cache on CPU1
7699[ 0.057366] CPU1: Booted secondary processor [410fd034]
7700[ 0.057625] Detected VIPT I-cache on CPU2
7701[ 0.057641] CPU2: Booted secondary processor [410fd034]
7702[ 0.057890] Detected VIPT I-cache on CPU3
7703[ 0.057906] CPU3: Booted secondary processor [410fd034]
7704[ 0.057939] Brought up 4 CPUs
7705[ 0.088228] SMP: Total of 4 processors activated.
7706[ 0.092905] CPU features: detected feature: 32-bit EL0 Support
7707[ 0.098701] CPU: All CPU(s) started at EL2
7708[ 0.102772] alternatives: patching kernel code
7709[ 0.108032] devtmpfs: initialized
7710[ 0.115565] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
7711[ 0.136589] xor: measuring software checksum speed
7712[ 0.181261] 8regs : 2543.000 MB/sec
7713[ 0.221286] 8regs_prefetch: 2266.000 MB/sec
7714[ 0.265655] 32regs : 3125.000 MB/sec
7715[ 0.305682] 32regs_prefetch: 2627.000 MB/sec
7716[ 0.310104] xor: using function: 32regs (3125.000 MB/sec)
7717[ 0.315559] pinctrl core: initialized pinctrl subsystem
7718[ 0.321240] NET: Registered protocol family 16
7719[ 0.326335] Failed to initialise IOMMU /amba/smmu@fd800000
7720[ 0.331831] vdso: 2 pages (1 code @ ffffff80088d7000, 1 data @ ffffff8008be4000)
7721[ 0.339031] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers.
7722[ 0.374343] DMA: preallocated 65536 KiB pool for atomic allocations
7723[ 0.390718] reset_zynqmp reset-controller: Xilinx zynqmp reset driver probed
7724[ 0.398193] ARM CCI_400_r1 PMU driver probed[ 0.404953] zynqmp-pinctrl ff180000.pinctrl: zynqmp pinctrl initialized
7725[ 0.431667] HugeTLB registered 2 MB page size, pre-allocated 0 pages
7726[ 0.504876] raid6: int64x1 gen() 446 MB/s
7727[ 0.576923] raid6: int64x1 xor() 485 MB/s
7728[ 0.649004] raid6: int64x2 gen() 741 MB/s
7729[ 0.720992] raid6: int64x2 xor() 661 MB/s
7730[ 0.793057] raid6: int64x4 gen() 1086 MB/s
7731[ 0.865104] raid6: int64x4 xor() 816 MB/s
7732[ 0.937158] raid6: int64x8 gen() 1266 MB/s
7733[ 1.009187] raid6: int64x8 xor() 824 MB/s
7734[ 1.081260] raid6: neonx1 gen() 798 MB/s
7735[ 1.153261] raid6: neonx1 xor() 837 MB/s
7736[ 1.225307] raid6: neonx2 gen() 1286 MB/s
7737[ 1.297354] raid6: neonx2 xor() 1143 MB/s
7738[ 1.369374] raid6: neonx4 gen() 1663 MB/s
7739[ 1.441427] raid6: neonx4 xor() 1306 MB/s
7740[ 1.513475] raid6: neonx8 gen() 1752 MB/s
7741[ 1.585511] raid6: neonx8 xor() 1348 MB/s
7742[ 1.589586] raid6: using algorithm neonx8 gen() 1752 MB/s
7743[ 1.594947] raid6: .... xor() 1348 MB/s, rmw enabled
7744[ 1.599879] raid6: using intx1 recovery algorithm
7745[ 1.605037] Write failed gate address:1000f02
7746[ 1.612969] SCSI subsystem initialized
7747[ 1.616759] usbcore: registered new interface driver usbfs
7748[ 1.622093] usbcore: registered new interface driver hub
7749[ 1.627367] usbcore: registered new device driver usb
7750[ 1.632414] media: Linux media interface: v0.10
7751[ 1.636865] Linux video capture interface: v2.00
7752[ 1.641451] pps_core: LinuxPPS API ver. 1 registered
7753[ 1.646355] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
7754[ 1.655449] PTP clock support registered
7755[ 1.659348] EDAC MC: Ver: 3.0.0
7756[ 1.662749] FPGA manager framework
7757[ 1.666092] fpga-region fpga-full: FPGA Region probed
7758[ 1.671096] Advanced Linux Sound Architecture Driver Initialized.
7759[ 1.677353] Bluetooth: Core ver 2.22
7760[ 1.680761] NET: Registered protocol family 31
7761[ 1.685152] Bluetooth: HCI device and connection manager initialized
7762[ 1.691470] Bluetooth: HCI socket layer initialized
7763[ 1.696312] Bluetooth: L2CAP socket layer initialized
7764[ 1.701338] Bluetooth: SCO socket layer initialized
7765[ 1.706739] clocksource: Switched to clocksource arch_sys_counter
7766[ 1.712729] VFS: Disk quotas dquot_6.6.0
7767[ 1.716567] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
7768[ 1.726793] NET: Registered protocol family 2
7769[ 1.731329] TCP established hash table entries: 16384 (order: 5, 131072 bytes)
7770[ 1.738445] TCP bind hash table entries: 16384 (order: 6, 262144 bytes)
7771[ 1.745227] TCP: Hash tables configured (established 16384 bind 16384)
7772[ 1.751628] UDP hash table entries: 1024 (order: 3, 32768 bytes)
7773[ 1.757559] UDP-Lite hash table entries: 1024 (order: 3, 32768 bytes)
7774[ 1.764067] NET: Registered protocol family 1
7775[ 1.768507] RPC: Registered named UNIX socket transport module.
7776[ 1.774233] RPC: Registered udp transport module.
7777[ 1.778900] RPC: Registered tcp transport module.
7778[ 1.783570] RPC: Registered tcp NFSv4.1 backchannel transport module.
7779[ 1.790116] Trying to unpack rootfs image as initramfs...
7780[ 2.114110] Freeing initrd memory: 8760K (ffffffc007771000 - ffffffc007fff000)
7781[ 2.121536] hw perfevents: enabled with armv8_pmuv3 PMU driver, 7 counters available
7782[ 2.129838] futex hash table entries: 1024 (order: 5, 131072 bytes)
7783[ 2.136486] workingset: timestamp_bits=62 max_order=19 bucket_order=0
7784[ 2.143478] NFS: Registering the id_resolver key type
7785[ 2.148360] Key type id_resolver registered
7786[ 2.152486] Key type id_legacy registered
7787[ 2.156469] nfs4filelayout_init: NFSv4 File Layout Driver Registering...
7788[ 2.163141] ntfs: driver 2.1.32 [Flags: R/W].
7789[ 2.167468] jffs2: version 2.2. (NAND) (SUMMARY) © 2001-2006 Red Hat, Inc.
7790[ 2.182226] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 247)
7791[ 2.189440] io scheduler noop registered
7792[ 2.193323] io scheduler deadline registered
7793[ 2.197567] io scheduler cfq registered (default)
7794[ 2.202824] nwl-pcie fd0e0000.pcie: Link is DOWN
7795[ 2.207284] OF: PCI: host bridge /amba/pcie@fd0e0000 ranges:
7796[ 2.212889] OF: PCI: MEM 0xe0000000..0xefffffff -> 0xe0000000
7797[ 2.218756] OF: PCI: MEM 0x600000000..0x7ffffffff -> 0x600000000
7798[ 2.224977] nwl-pcie fd0e0000.pcie: PCI host bridge to bus 0000:00
7799[ 2.231042] pci_bus 0000:00: root bus resource [bus 00-ff]
7800[ 2.236488] pci_bus 0000:00: root bus resource [mem 0xe0000000-0xefffffff]
7801[ 2.243325] pci_bus 0000:00: root bus resource [mem 0x600000000-0x7ffffffff pref]
7802[ 2.251031] pci 0000:00:00.0: PCI bridge to [bus 01-0c]
7803[ 2.256780] xilinx-dpdma fd4c0000.dma: Xilinx DPDMA engine is probed
7804[ 2.263153] xilinx-vdma 400000000.dma: Xilinx AXI VDMA Engine Driver Probed!!
7805[ 2.270210] xilinx-vdma 400010000.dma: Xilinx AXI VDMA Engine Driver Probed!!
7806[ 2.277360] xilinx-zynqmp-dma fd500000.dma: ZynqMP DMA driver Probe success
7807[ 2.284221] xilinx-zynqmp-dma fd510000.dma: ZynqMP DMA driver Probe success
7808[ 2.291141] xilinx-zynqmp-dma fd520000.dma: ZynqMP DMA driver Probe success
7809[ 2.298061] xilinx-zynqmp-dma fd530000.dma: ZynqMP DMA driver Probe success
7810[ 2.304982] xilinx-zynqmp-dma fd540000.dma: ZynqMP DMA driver Probe success
7811[ 2.311902] xilinx-zynqmp-dma fd550000.dma: ZynqMP DMA driver Probe success
7812[ 2.318824] xilinx-zynqmp-dma fd560000.dma: ZynqMP DMA driver Probe success
7813[ 2.325747] xilinx-zynqmp-dma fd570000.dma: ZynqMP DMA driver Probe success
7814[ 2.332700] xilinx-zynqmp-dma ffa80000.dma: ZynqMP DMA driver Probe success
7815[ 2.339583] xilinx-zynqmp-dma ffa90000.dma: ZynqMP DMA driver Probe success
7816[ 2.346499] xilinx-zynqmp-dma ffaa0000.dma: ZynqMP DMA driver Probe success
7817[ 2.353424] xilinx-zynqmp-dma ffab0000.dma: ZynqMP DMA driver Probe success
7818[ 2.360342] xilinx-zynqmp-dma ffac0000.dma: ZynqMP DMA driver Probe success
7819[ 2.367260] xilinx-zynqmp-dma ffad0000.dma: ZynqMP DMA driver Probe success
7820[ 2.374183] xilinx-zynqmp-dma ffae0000.dma: ZynqMP DMA driver Probe success
7821[ 2.381101] xilinx-zynqmp-dma ffaf0000.dma: ZynqMP DMA driver Probe success
7822[ 2.409233] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
7823[ 2.416751] ff000000.serial: ttyPS1 at MMIO 0xff000000 (irq = 46, base_baud = 6250000) is a xuartps
7824[ 2.425777] ff010000.serial: ttyPS0 at MMIO 0xff010000 (irq = 47, base_baud =·r¢¢º000) is a xuartps
7825 Êêconsole [ttyPS0] enabled
7826[ 2.434719] console [ttyPS0] enabled
7827[ 2.441684] bootconsole [cdns0] disabled
7828[ 2.441684] bootconsole [cdns0] disabled
7829[ 2.449737] Unable to detect cache hierarchy from DT for CPU 0
7830[ 2.461279] brd: module loaded
7831[ 2.467541] loop: module loaded
7832[ 2.471521] ahci-ceva fd0c0000.ahci: AHCI 0001.0301 32 slots 2 ports 6 Gbps 0x3 impl platform mode
7833[ 2.480405] ahci-ceva fd0c0000.ahci: flags: 64bit ncq sntf pm clo only pmp fbs pio slum part ccc sds apst
7834[ 2.491133] scsi host0: ahci-ceva
7835[ 2.494542] scsi host1: ahci-ceva
7836[ 2.497882] ata1: SATA max UDMA/133 mmio [mem 0xfd0c0000-0xfd0c1fff] port 0x100 irq 43
7837[ 2.505715] ata2: SATA max UDMA/133 mmio [mem 0xfd0c0000-0xfd0c1fff] port 0x180 irq 43
7838[ 2.513750] mtdoops: mtd device (mtddev=name/number) must be supplied
7839[ 2.521070] zynqmp-qspi ff0f0000.spi: rx bus width not found
7840[ 2.527013] m25p80 spi0.0: found n25q00, expected n25q512a
7841[ 2.532738] m25p80 spi0.0: n25q00 (131072 Kbytes)
7842[ 2.537373] 5 ofpart partitions found on MTD device spi0.0
7843[ 2.542821] Creating 5 MTD partitions on "spi0.0":
7844[ 2.547598] 0x000000000000-0x000000500000 : "boot"
7845[ 2.552865] 0x000000500000-0x000000540000 : "bootenv"
7846[ 2.558262] 0x000000540000-0x000002740000 : "kernel"
7847[ 2.563570] 0x000002740000-0x000003740000 : "user"
7848[ 2.568689] 0x000003740000-0x000003750000 : "test"
7849[ 2.574690] libphy: Fixed MDIO Bus: probed
7850[ 2.579805] tun: Universal TUN/TAP device driver, 1.6
7851[ 2.584774] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
7852[ 2.591061] CAN device driver interface
7853[ 2.595388] macb ff0c0000.ethernet: Not enabling partial store and forward
7854[ 2.602694] libphy: MACB_mii_bus: probed
7855[ 2.683012] macb ff0c0000.ethernet eth0: Cadence GEM rev 0x50070106 at 0xff0c0000 irq 30 (00:0a:35:00:22:01)
7856[ 2.692757] Marvell 88E1510 ff0c0000.etherne:00: attached PHY driver [Marvell 88E1510] (mii_bus:phy_addr=ff0c0000.etherne:00, irq=-1)
7857[ 2.705339] usbcore: registered new interface driver asix
7858[ 2.710704] usbcore: registered new interface driver ax88179_178a
7859[ 2.716749] usbcore: registered new interface driver cdc_ether
7860[ 2.722565] usbcore: registered new interface driver net1080
7861[ 2.728207] usbcore: registered new interface driver cdc_subset
7862[ 2.734111] usbcore: registered new interface driver zaurus
7863[ 2.739677] usbcore: registered new interface driver cdc_ncm
7864[ 2.745637] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
7865[ 2.752080] ehci-pci: EHCI PCI platform driver
7866[ 2.756735] usbcore: registered new interface driver uas
7867[ 2.761993] usbcore: registered new interface driver usb-storage
7868[ 2.768247] mousedev: PS/2 mouse device common for all mice
7869[ 2.774136] rtc_zynqmp ffa60000.rtc: rtc core: registered ffa60000.rtc as rtc0
7870[ 2.781303] i2c /dev entries driver
7871[ 2.784935] cdns-i2c ff020000.i2c: 400 kHz mmio ff020000 irq 32
7872[ 2.790993] cdns-i2c ff030000.i2c: 400 kHz mmio ff030000 irq 33
7873[ 2.797758] usbcore: registered new interface driver uvcvideo
7874[ 2.803424] USB Video Class driver (1.1.1)
7875[ 2.807865] Bluetooth: HCI UART driver ver 2.3
7876[ 2.812228] Bluetooth: HCI UART protocol H4 registered
7877[ 2.817343] Bluetooth: HCI UART protocol BCSP registered
7878[ 2.822638] Bluetooth: HCI UART protocol LL registered
7879[ 2.827758] Bluetooth: HCI UART protocol ATH3K registered
7880[ 2.831866] ata1: SATA link down (SStatus 0 SControl 330)
7881[ 2.831902] ata2: SATA link down (SStatus 0 SControl 330)
7882[ 2.843903] Bluetooth: HCI UART protocol Three-wire (H5) registered
7883[ 2.850188] Bluetooth: HCI UART protocol Intel registered
7884[ 2.855571] Bluetooth: HCI UART protocol Broadcom registered
7885[ 2.861177] Bluetooth: HCI UART protocol QCA registered
7886[ 2.866417] usbcore: registered new interface driver bcm203x
7887[ 2.872058] usbcore: registered new interface driver bpa10x
7888[ 2.877613] usbcore: registered new interface driver bfusb
7889[ 2.883084] usbcore: registered new interface driver btusb
7890[ 2.888519] Bluetooth: Generic Bluetooth SDIO driver ver 0.1
7891[ 2.894211] usbcore: registered new interface driver ath3k
7892[ 2.899753] EDAC MC: ECC not enabled
7893[ 2.903377] EDAC DEVICE0: Giving out device to module edac controller cache_err: DEV edac (POLLED)
7894[ 2.912412] EDAC DEVICE1: Giving out device to module zynqmp-ocm-edac controller zynqmp_ocm: DEV ff960000.memory-controller (INTERRUPT)
7895[ 2.924709] sdhci: Secure Digital Host Controller Interface driver
7896[ 2.930799] sdhci: Copyright(c) Pierre Ossman
7897[ 2.935138] sdhci-pltfm: SDHCI platform and OF driver helper
7898[ 2.986750] mmc0: SDHCI controller on ff160000.sdhci [ff160000.sdhci] using ADMA 64-bit
7899[ 2.994871] ledtrig-cpu: registered to indicate activity on CPUs
7900[ 3.000920] usbcore: registered new interface driver usbhid
7901[ 3.006405] usbhid: USB HID core driver
7902[ 3.011804] fpga_manager fpga0: Xilinx ZynqMP FPGA Manager registered
7903[ 3.018666] xilinx-dp-snd-pcm dp_snd_pcm0: Xilinx DisplayPort Sound PCM probed
7904[ 3.025830] xilinx-dp-snd-pcm dp_snd_pcm1: Xilinx DisplayPort Sound PCM probed
7905[ 3.033182] PLL: shutdown
7906[ 3.036610] Write failed to divider address:fd1a007c
7907[ 3.041644] PLL: enable
7908[ 3.044169] xilinx-dp-snd-codec dp_snd_codec0: Xilinx DisplayPort Sound Codec probed
7909[ 3.052209] xilinx-dp-snd-card dp_snd_card: xilinx-dp-snd-codec-dai <-> xilinx-dp-snd-codec-dai mapping ok
7910[ 3.061877] xilinx-dp-snd-card dp_snd_card: xilinx-dp-snd-codec-dai <-> xilinx-dp-snd-codec-dai mapping ok
7911[ 3.071732] xilinx-dp-snd-card dp_snd_card: Xilinx DisplayPort Sound Card probed
7912[ 3.079154] pktgen: Packet Generator for packet performance testing. Version: 2.75
7913[ 3.088867] Netfilter messages via NETLINK v0.30.
7914[ 3.093605] ip_tables: (C) 2000-2006 Netfilter Core Team
7915[ 3.098878] Initializing XFRM netlink socket
7916[ 3.103263] NET: Registered protocol family 10
7917[ 3.108266] ip6_tables: (C) 2000-2006 Netfilter Core Team
7918[ 3.113617] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver
7919[ 3.119842] NET: Registered protocol family 17
7920[ 3.124210] NET: Registered protocol family 15
7921[ 3.128637] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this.
7922[ 3.141559] Ebtables v2.0 registered
7923[ 3.145170] can: controller area network core (rev 20120528 abi 9)
7924[ 3.151317] NET: Registered protocol family 29
7925[ 3.155708] can: raw protocol (rev 20120528)
7926[ 3.159960] can: broadcast manager protocol (rev 20161123 t)
7927[ 3.165604] can: netlink gateway (rev 20130117) max_hops=1
7928[ 3.171902] Bluetooth: RFCOMM TTY layer initialized
7929[ 3.176701] Bluetooth: RFCOMM socket layer initialized
7930[ 3.181825] Bluetooth: RFCOMM ver 1.11
7931[ 3.185552] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
7932[ 3.190844] Bluetooth: BNEP filters: protocol multicast
7933[ 3.196056] Bluetooth: BNEP socket layer initialized
7934[ 3.201000] Bluetooth: HIDP (Human Interface Emulation) ver 1.2
7935[ 3.206905] Bluetooth: HIDP socket layer initialized
7936[ 3.212027] 9pnet: Installing 9P2000 support
7937[ 3.216224] Key type dns_resolver registered
7938[ 3.220865] registered taskstats version 1
7939[ 3.225258] Btrfs loaded, crc32c=crc32c-generic
7940[ 3.236940] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller
7941[ 3.242369] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 1
7942[ 3.250232] xhci-hcd xhci-hcd.0.auto: hcc params 0x0238f625 hci version 0x100 quirks 0x02010010
7943[ 3.258884] xhci-hcd xhci-hcd.0.auto: irq 229, io mem 0xfe300000
7944[ 3.264958] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
7945[ 3.271660] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
7946[ 3.278864] usb usb1: Product: xHCI Host Controller
7947[ 3.283721] usb usb1: Manufacturer: Linux 4.9.0 xhci-hcd
7948[ 3.289015] usb usb1: SerialNumber: xhci-hcd.0.auto
7949[ 3.294180] hub 1-0:1.0: USB hub found
7950[ 3.297861] hub 1-0:1.0: 1 port detected
7951[ 3.301860] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller
7952[ 3.307267] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 2
7953[ 3.314936] usb usb2: We don't know the algorithms for LPM for this host, disabling LPM.
7954[ 3.323036] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003
7955[ 3.329744] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
7956[ 3.336947] usb usb2: Product: xHCI Host Controller
7957[ 3.341807] usb usb2: Manufacturer: Linux 4.9.0 xhci-hcd
7958[ 3.347102] usb usb2: SerialNumber: xhci-hcd.0.auto
7959[ 3.352164] hub 2-0:1.0: USB hub found
7960[ 3.355840] hub 2-0:1.0: 1 port detected
7961[ 3.360115] rtc_zynqmp ffa60000.rtc: setting system clock to 1970-01-01 00:00:15 UTC (15)
7962[ 3.368313] clk: Not disabling unused clocks
7963[ 3.372502] ALSA device list:
7964[ 3.375450] #0: DisplayPort monitor
7965[ 3.379714] Freeing unused kernel memory: 448K (ffffffc000b70000 - ffffffc000be0000)
7966INIT: version 2.88 booting
7967Starting udev
7968[ 3.501459] udevd[1612]: starting version 3.2
7969[ 3.506089] random: udevd: uninitialized urandom read (16 bytes read)
7970[ 3.512598] random: udevd: uninitialized urandom read (16 bytes read)
7971[ 3.519017] random: udevd: uninitialized urandom read (16 bytes read)
7972[ 3.525415] random: udevd: uninitialized urandom read (16 bytes read)
7973[ 3.535457] udevd[1613]: starting eudev-3.2
7974[ 3.578535] random: udevd: uninitialized urandom read (16 bytes read)
7975[ 3.588374] random: udevd: uninitialized urandom read (16 bytes read)
7976[ 3.610698] dsaxidma: loading out-of-tree module taints kernel.
7977[ 3.610968] dsaxidma: loading out-of-tree module taints kernel.
7978[ 3.611625] <dma1> init: registered
7979[ 3.631987] <dma2> init: registered
7980Populating dev cache
7981[ 4.109418] random: dd: uninitialized urandom read (512 bytes read)
7982Thu Jul 26 08:51:43 UTC 2018
7983Starting internet superserver: inetd.
7984Running postinst /etc/rpm-postinsts/100-sysvinit-inittab...
7985update-rc.d: /etc/init.d/run-postinsts exists during rc.d purge (continuing)
7986INIT: Entering runlevel: 5
7987Hello World
7988[22]:0x12
7989[20]:0x201
7990[20]:0x201
7991[22]:0x1
7992[0]:0x140
7993[0]:0x140
7994Configuring network interfaces... [ 4.408381] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
7995done.
7996Starting Dropbear SSH server: [ 4.437089] random: dropbearkey: uninitialized urandom read (32 bytes read)
7997[ 4.447178] random: dropbearkey: uninitialized urandom read (32 bytes read)
7998Generating key, this may take a while...
7999[ 5.426856] macb ff0c0000.ethernet eth0: link up (1000/Full)
8000[ 5.432462] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
8001[ 16.674871] random: dropbearkey: uninitialized urandom read (32 bytes read)
8002Public key portion is:
8003ssh-rsa AAAAB3NzaC1yc2EAAAADAQABAAABAQDciVcCeXvoel1pkntlt6NG8OacZoeySa/OJat+qwcizxoNuRJRYj/R/zC5OL7FFP4SYmlVmORSEho3XtLfpYk+yLPLact8BefB0XXkQU8cYVWfFhHvjiDrp/M44I2ymm6M9R2boAMBCEDZU/mw443azEczwE0q8V0+yam6jGsQHAeZSoDW3tEJaYgYVwD3AbmPDrEsQxhk1rMvkJf4O5JntXi10E9oL5wrWc8vHqpyETmA53HXBRn4K7TfgaXTugNrhlohFNorXwF4QG3dUUaFHjJGFFP0JEeKSbOwpZC+e6zQHe3S+YsZI4A1UgvX1Jwp52W8MvaV/HW3VBP1ZofF root@VP88x_2017_3_PRJ0191
8004Fingerprint: md5 31:c5:08:ad:81:94:3f:96:be:7f:e2[ 16.727196] random: fast init done
8005:c3:75:0d:5b:db
8006dropbear.
8007Starting syslogd/klogd: done
8008[ 17.158550] random: crng init done
8009[ 18.946210] jffs2: notice: (2076) jffs2_build_xattr_subsystem: complete building xattr subsystem, 0 of xdatum (0 unchecked, 0 orphan) and 0 of xref (0 dead, 0 orphan) found.
8010hello world.....
8011Starting tcf-agent: OK
8012
8013root@VP88x_2017_3_PRJ0191:~# Fmc134APP 0 1 1 1 1
8014UnitAPI version : 1.3.8 : Enumerating units in the system, please wait...
8015
8016unitapi_auto_config returned -50
8017
8018Invalid device handle '1'
8019Press a key to exit the application
8020^C
8021root@VP88x_2017_3_PRJ0191:~# Fmc134APP 0 1 1 1 1^C
8022root@VP88x_2017_3_PRJ0191:~# echo 1 > /sys/bus/pci/devices/0000\:00\:00.0/remove
8023root@VP88x_2017_3_PRJ0191:~# echo 1 > /sys/bus/pci/rescan
8024[ 48.979275] pci 0000:00:00.0: PCI bridge to [bus 01-0c]
8025root@VP88x_2017_3_PRJ0191:~# cp /mnt/
8026diagnostic.elf myfile pciconfig1
8027iperf pciconfig0 start.sh
8028root@VP88x_2017_3_PRJ0191:~# cp /mnt/pciconfig0 /sys/bus/pci/devices/0000\:00\:00.0/config
8029cp: can't create '/sys/bus/pci/devices/0000:00:00.0/config': File exists
8030root@VP88x_2017_3_PRJ0191:~# reboot
8031
8032The system is going down for reboot NOW!_PRJ0191 (ttyPS0) (Thu Jul 26 á:54:1
8033INIT: Sending processes the TERM signal
8034root@VP88x_2017_3_PRJ0191:~# Stopping Dropbear SSH server: stopped /usr/sbin/dropbear (pid 2063)
8035dropbear.
8036Stopping syslogd/klogd: stopped syslogd (pid 2071)
8037stopped klogd (pid 2074)
8038done
8039Stopping tcf-agent: OK
8040Deconfiguring network interfaces... done.
8041Sending all processes the TERM signal...
8042logout
8043[ 156.978773] macb ff0c0000.ethernet eth0: link down
8044Sending all processes the KILL signal...
8045Unmounting remote filesystems...
8046Deactivating swap...
8047Unmounting local filesystems...
8048êXilinx Zynq MP First Stage Boot Loader arting system
8049Release 2017.3 May 24 2018 - 10:35:53
8050Marvell PHY reset
8051SI5338 0x70 already configured
8052SI5338 0x71 already configured
8053
8054
8055U-Boot 2017.01 (Jul 26 2018 - 02:50:11 -0600) Xilinx ZynqMP ZCU102 revB
8056
8057I2C: ready
8058DRAM: 2 GiB
8059EL Level: EL2
8060Chip ID: xczu3eg
8061MMC: Card did not respond to voltage select!
8062sdhci@ff160000 - probe failed: -95
8063Card did not respond to voltage select!
8064
8065zynqmp_qspi_ofdata_to_platdata: CLK 300000000
8066SF: Detected n25q1024 with page size 256 Bytes, erase size 64 KiB, total 128 MiB
8067*** Warning - bad CRC, using default environment
8068
8069In: serial
8070Out: serial
8071Err: serial
8072Bootmode: QSPI_MODE
8073Net: ZYNQ GEM: ff0c0000, phyaddr c, interface rgmii-id
8074eth0: ethernet@ff0c0000
8075U-BOOT for VP88x_2017_3_PRJ0191
8076
8077Hit any key to stop autoboot: 0
8078SF: Detected n25q1024 with page size 256 Bytes, erase size 64 KiB, total 128 MiB
8079device 0 offset 0x540000, size 0x2200000
8080SF: 35651584 bytes @ 0x540000 Read: OK
8081## Loading kernel from FIT Image at 10000000 ...
8082 Using 'conf@1' configuration
8083 Trying 'kernel@0' kernel subimage
8084 Description: Linux Kernel
8085 Type: Kernel Image
8086 Compression: uncompressed
8087 Data Start: 0x100000d8
8088 Data Size: 12503552 Bytes = 11.9 MiB
8089 Architecture: AArch64
8090 OS: Linux
8091 Load Address: 0x00080000
8092 Entry Point: 0x00080000
8093 Hash algo: sha1
8094 Hash value: 6738559f9c7602fa2a0ff36fdfc8cf5b9b3e6565
8095 Verifying Hash Integrity ... sha1+ OK
8096## Loading ramdisk from FIT Image at 10000000 ...
8097 Using 'conf@1' configuration
8098 Trying 'ramdisk@0' ramdisk subimage
8099 Description: ramdisk
8100 Type: RAMDisk Image
8101 Compression: uncompressed
8102 Data Start: 0x10bf54e4
8103 Data Size: 8973721 Bytes = 8.6 MiB
8104 Architecture: AArch64
8105 OS: Linux
8106 Load Address: unavailable
8107 Entry Point: unavailable
8108 Hash algo: sha1
8109 Hash value: 4b595c4e0c42ac8967d3d732b389c6521f0b492f
8110 Verifying Hash Integrity ... sha1+ OK
8111## Loading fdt from FIT Image at 10000000 ...
8112 Using 'conf@1' configuration
8113 Trying 'fdt@0' fdt subimage
8114 Description: Flattened Device Tree blob
8115 Type: Flat Device Tree
8116 Compression: uncompressed
8117 Data Start: 0x10becbd0
8118 Data Size: 34910 Bytes = 34.1 KiB
8119 Architecture: AArch64
8120 Hash algo: sha1
8121 Hash value: 20fc450d3d82f1967aba254f93c3704b6f5d1f6e
8122 Verifying Hash Integrity ... sha1+ OK
8123 Booting using the fdt blob at 0x10becbd0
8124 Loading Kernel Image ... OK
8125 Loading Ramdisk to 07771000, end 07fffd99 ... OK
8126 Loading Device Tree to 0000000007765000, end 000000000777085d ... OK
8127
8128Starting kernel ...
8129
8130[ 0.000000] Booting Linux on physical CPU 0x0
8131[ 0.000000] Linux version 4.9.0 (user@user-VirtualBox) (gcc version 6.2.1 20161016 (Linaro GCC 6.2-2016.11) ) #1 SMP Thu Jul 26 01:50:46 MDT 2018
8132[ 0.000000] Boot CPU: AArch64 Processor [410fd034]
8133[ 0.000000] earlycon: cdns0 at MMIO 0x00000000ff010000 (options '115200n8')
8134[ 0.000000] bootconsole [cdns0] enabled
8135[ 0.000000] efi: Getting EFI parameters from FDT:
8136[ 0.000000] efi: UEFI not found.
8137[ 0.000000] cma: Reserved 512 MiB at 0x0000000060000000
8138[ 0.000000] psci: probing for conduit method from DT.
8139[ 0.000000] psci: PSCIv1.0 detected in firmware.
8140[ 0.000000] psci: Using standard PSCI v0.2 function IDs
8141[ 0.000000] psci: MIGRATE_INFO_TYPE not supported.
8142[ 0.000000] percpu: Embedded 21 pages/cpu @ffffffc05ff76000 s46232 r8192 d31592 u86016
8143[ 0.000000] Detected VIPT I-cache on CPU0
8144[ 0.000000] CPU features: enabling workaround for ARM erratum 845719
8145[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 517120
8146[ 0.000000] Kernel command line: console=ttyPS0,115200 earlyprintk earlycon=cdns,mmio,0xFF010000,115200n8 uio_pdrv_genirq.of_id=generic-uio clk_ignore_unused cma=512M coherent_pool=64MiB
8147[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
8148[ 0.000000] Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes)
8149[ 0.000000] Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes)
8150[ 0.000000] Memory: 1519128K/2097152K available (8508K kernel code, 562K rwdata, 2636K rodata, 448K init, 382K bss, 53736K reserved, 524288K cma-reserved)
8151[ 0.000000] Virtual kernel memory layout:
8152[ 0.000000] modules : 0xffffff8000000000 - 0xffffff8008000000 ( 128 MB)
8153[ 0.000000] vmalloc : 0xffffff8008000000 - 0xffffffbebfff0000 ( 250 GB)
8154[ 0.000000] .text : 0xffffff8008080000 - 0xffffff80088d0000 ( 8512 KB)
8155[ 0.000000] .rodata : 0xffffff80088d0000 - 0xffffff8008b70000 ( 2688 KB)
8156[ 0.000000] .init : 0xffffff8008b70000 - 0xffffff8008be0000 ( 448 KB)
8157[ 0.000000] .data : 0xffffff8008be0000 - 0xffffff8008c6ca00 ( 563 KB)
8158[ 0.000000] .bss : 0xffffff8008c6ca00 - 0xffffff8008ccc434 ( 383 KB)
8159[ 0.000000] fixed : 0xffffffbefe7fd000 - 0xffffffbefec00000 ( 4108 KB)
8160[ 0.000000] PCI I/O : 0xffffffbefee00000 - 0xffffffbeffe00000 ( 16 MB)
8161[ 0.000000] vmemmap : 0xffffffbf00000000 - 0xffffffc000000000 ( 4 GB maximum)
8162[ 0.000000] 0xffffffbf00000000 - 0xffffffbf01c00000 ( 28 MB actual)
8163[ 0.000000] memory : 0xffffffc000000000 - 0xffffffc080000000 ( 2048 MB)
8164[ 0.000000] Hierarchical RCU implementation.
8165[ 0.000000] Build-time adjustment of leaf fanout to 64.
8166[ 0.000000] RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=4.
8167[ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=64, nr_cpu_ids=4
8168[ 0.000000] NR_IRQS:64 nr_irqs:64 0
8169[ 0.000000] GIC: Adjusting CPU interface base to 0x00000000f902f000
8170[ 0.000000] GIC: Using split EOI/Deactivate mode
8171[ 0.000000] arm_arch_timer: Architected cp15 timer(s) running at 50.00MHz (phys).
8172[ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0xb8812736b, max_idle_ns: 440795202655 ns
8173[ 0.000003] sched_clock: 56 bits at 50MHz, resolution 20ns, wraps every 4398046511100ns
8174[ 0.008251] Console: colour dummy device 80x25
8175[ 0.012518] Calibrating delay loop (skipped), value calculated using timer frequency.. 100.00 BogoMIPS (lpj=200000)
8176[ 0.022877] pid_max: default: 32768 minimum: 301
8177[ 0.027568] Mount-cache hash table entries: 4096 (order: 3, 32768 bytes)
8178[ 0.034128] Mountpoint-cache hash table entries: 4096 (order: 3, 32768 bytes)
8179[ 0.041858] ASID allocator initialised with 65536 entries
8180[ 0.047560] zynqmp_plat_init Power management API v0.3
8181[ 0.052577] EFI services will not be available.
8182[ 0.057338] Detected VIPT I-cache on CPU1
8183[ 0.057371] CPU1: Booted secondary processor [410fd034]
8184[ 0.057630] Detected VIPT I-cache on CPU2
8185[ 0.057646] CPU2: Booted secondary processor [410fd034]
8186[ 0.057896] Detected VIPT I-cache on CPU3
8187[ 0.057912] CPU3: Booted secondary processor [410fd034]
8188[ 0.057945] Brought up 4 CPUs
8189[ 0.088228] SMP: Total of 4 processors activated.
8190[ 0.092904] CPU features: detected feature: 32-bit EL0 Support
8191[ 0.098701] CPU: All CPU(s) started at EL2
8192[ 0.102773] alternatives: patching kernel code
8193[ 0.108033] devtmpfs: initialized
8194[ 0.115552] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
8195[ 0.136537] xor: measuring software checksum speed
8196[ 0.181210] 8regs : 2542.000 MB/sec
8197[ 0.221234] 8regs_prefetch: 2266.000 MB/sec
8198[ 0.265603] 32regs : 3125.000 MB/sec
8199[ 0.305631] 32regs_prefetch: 2627.000 MB/sec
8200[ 0.310051] xor: using function: 32regs (3125.000 MB/sec)
8201[ 0.315507] pinctrl core: initialized pinctrl subsystem
8202[ 0.321184] NET: Registered protocol family 16
8203[ 0.326288] Failed to initialise IOMMU /amba/smmu@fd800000
8204[ 0.331792] vdso: 2 pages (1 code @ ffffff80088d7000, 1 data @ ffffff8008be4000)
8205[ 0.338996] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers.
8206[ 0.374317] DMA: preallocated 65536 KiB pool for atomic allocations
8207[ 0.390724] reset_zynqmp reset-controller: Xilinx zynqmp reset driver probed
8208[ 0.398196] ARM CCI_400_r1 PMU driver probed[ 0.404972] zynqmp-pinctrl ff180000.pinctrl: zynqmp pinctrl initialized
8209[ 0.439923] HugeTLB registered 2 MB page size, pre-allocated 0 pages
8210[ 0.512820] raid6: int64x1 gen() 447 MB/s
8211[ 0.584882] raid6: int64x1 xor() 486 MB/s
8212[ 0.656926] raid6: int64x2 gen() 741 MB/s
8213[ 0.728951] raid6: int64x2 xor() 661 MB/s
8214[ 0.800998] raid6: int64x4 gen() 1086 MB/s
8215[ 0.873041] raid6: int64x4 xor() 816 MB/s
8216[ 0.945064] raid6: int64x8 gen() 1265 MB/s
8217[ 1.017131] raid6: int64x8 xor() 824 MB/s
8218[ 1.089169] raid6: neonx1 gen() 796 MB/s
8219[ 1.161211] raid6: neonx1 xor() 837 MB/s
8220[ 1.233272] raid6: neonx2 gen() 1286 MB/s
8221[ 1.305285] raid6: neonx2 xor() 1143 MB/s
8222[ 1.377337] raid6: neonx4 gen() 1666 MB/s
8223[ 1.449361] raid6: neonx4 xor() 1306 MB/s
8224[ 1.521418] raid6: neonx8 gen() 1752 MB/s
8225[ 1.593459] raid6: neonx8 xor() 1348 MB/s
8226[ 1.597535] raid6: using algorithm neonx8 gen() 1752 MB/s
8227[ 1.602897] raid6: .... xor() 1348 MB/s, rmw enabled
8228[ 1.607827] raid6: using intx1 recovery algorithm
8229[ 1.612979] Write failed gate address:1000f02
8230[ 1.620929] SCSI subsystem initialized
8231[ 1.624718] usbcore: registered new interface driver usbfs
8232[ 1.630051] usbcore: registered new interface driver hub
8233[ 1.635323] usbcore: registered new device driver usb
8234[ 1.640370] media: Linux media interface: v0.10
8235[ 1.644822] Linux video capture interface: v2.00
8236[ 1.649410] pps_core: LinuxPPS API ver. 1 registered
8237[ 1.654314] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
8238[ 1.663406] PTP clock support registered
8239[ 1.667309] EDAC MC: Ver: 3.0.0
8240[ 1.670660] FPGA manager framework
8241[ 1.673996] fpga-region fpga-full: FPGA Region probed
8242[ 1.678999] Advanced Linux Sound Architecture Driver Initialized.
8243[ 1.685261] Bluetooth: Core ver 2.22
8244[ 1.688675] NET: Registered protocol family 31
8245[ 1.693058] Bluetooth: HCI device and connection manager initialized
8246[ 1.699376] Bluetooth: HCI socket layer initialized
8247[ 1.704218] Bluetooth: L2CAP socket layer initialized
8248[ 1.709244] Bluetooth: SCO socket layer initialized
8249[ 1.714672] clocksource: Switched to clocksource arch_sys_counter
8250[ 1.720668] VFS: Disk quotas dquot_6.6.0
8251[ 1.724498] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
8252[ 1.734760] NET: Registered protocol family 2
8253[ 1.739299] TCP established hash table entries: 16384 (order: 5, 131072 bytes)
8254[ 1.746421] TCP bind hash table entries: 16384 (order: 6, 262144 bytes)
8255[ 1.753207] TCP: Hash tables configured (established 16384 bind 16384)
8256[ 1.759601] UDP hash table entries: 1024 (order: 3, 32768 bytes)
8257[ 1.765535] UDP-Lite hash table entries: 1024 (order: 3, 32768 bytes)
8258[ 1.772050] NET: Registered protocol family 1
8259[ 1.776558] RPC: Registered named UNIX socket transport module.
8260[ 1.782286] RPC: Registered udp transport module.
8261[ 1.786953] RPC: Registered tcp transport module.
8262[ 1.791625] RPC: Registered tcp NFSv4.1 backchannel transport module.
8263[ 1.798175] Trying to unpack rootfs image as initramfs...
8264[ 2.121248] Freeing initrd memory: 8760K (ffffffc007771000 - ffffffc007fff000)
8265[ 2.128677] hw perfevents: enabled with armv8_pmuv3 PMU driver, 7 counters available
8266[ 2.136971] futex hash table entries: 1024 (order: 5, 131072 bytes)
8267[ 2.143594] workingset: timestamp_bits=62 max_order=19 bucket_order=0
8268[ 2.150547] NFS: Registering the id_resolver key type
8269[ 2.155432] Key type id_resolver registered
8270[ 2.159574] Key type id_legacy registered
8271[ 2.163546] nfs4filelayout_init: NFSv4 File Layout Driver Registering...
8272[ 2.170217] ntfs: driver 2.1.32 [Flags: R/W].
8273[ 2.174543] jffs2: version 2.2. (NAND) (SUMMARY) © 2001-2006 Red Hat, Inc.
8274[ 2.189340] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 247)
8275[ 2.196550] io scheduler noop registered
8276[ 2.200438] io scheduler deadline registered
8277[ 2.204679] io scheduler cfq registered (default)
8278[ 2.209939] nwl-pcie fd0e0000.pcie: Link is UP
8279[ 2.214232] OF: PCI: host bridge /amba/pcie@fd0e0000 ranges:
8280[ 2.219835] OF: PCI: MEM 0xe0000000..0xefffffff -> 0xe0000000
8281[ 2.225702] OF: PCI: MEM 0x600000000..0x7ffffffff -> 0x600000000
8282[ 2.231925] nwl-pcie fd0e0000.pcie: PCI host bridge to bus 0000:00
8283[ 2.237988] pci_bus 0000:00: root bus resource [bus 00-ff]
8284[ 2.243434] pci_bus 0000:00: root bus resource [mem 0xe0000000-0xefffffff]
8285[ 2.250270] pci_bus 0000:00: root bus resource [mem 0x600000000-0x7ffffffff pref]
8286[ 2.258191] pci 0000:00:00.0: BAR 8: assigned [mem 0xe0000000-0xe00fffff]
8287[ 2.264786] pci 0000:01:00.0: BAR 0: assigned [mem 0xe0000000-0xe00007ff]
8288[ 2.271533] pci 0000:00:00.0: PCI bridge to [bus 01-0c]
8289[ 2.276720] pci 0000:00:00.0: bridge window [mem 0xe0000000-0xe00fffff]
8290[ 2.284189] xilinx-dpdma fd4c0000.dma: Xilinx DPDMA engine is probed
8291[ 2.290560] xilinx-vdma 400000000.dma: Xilinx AXI VDMA Engine Driver Probed!!
8292[ 2.297612] xilinx-vdma 400010000.dma: Xilinx AXI VDMA Engine Driver Probed!!
8293[ 2.304761] xilinx-zynqmp-dma fd500000.dma: ZynqMP DMA driver Probe success
8294[ 2.311625] xilinx-zynqmp-dma fd510000.dma: ZynqMP DMA driver Probe success
8295[ 2.318543] xilinx-zynqmp-dma fd520000.dma: ZynqMP DMA driver Probe success
8296[ 2.325463] xilinx-zynqmp-dma fd530000.dma: ZynqMP DMA driver Probe success
8297[ 2.332386] xilinx-zynqmp-dma fd540000.dma: ZynqMP DMA driver Probe success
8298[ 2.339300] xilinx-zynqmp-dma fd550000.dma: ZynqMP DMA driver Probe success
8299[ 2.346223] xilinx-zynqmp-dma fd560000.dma: ZynqMP DMA driver Probe success
8300[ 2.353146] xilinx-zynqmp-dma fd570000.dma: ZynqMP DMA driver Probe success
8301[ 2.360103] xilinx-zynqmp-dma ffa80000.dma: ZynqMP DMA driver Probe success
8302[ 2.366985] xilinx-zynqmp-dma ffa90000.dma: ZynqMP DMA driver Probe success
8303[ 2.373906] xilinx-zynqmp-dma ffaa0000.dma: ZynqMP DMA driver Probe success
8304[ 2.380828] xilinx-zynqmp-dma ffab0000.dma: ZynqMP DMA driver Probe success
8305[ 2.387745] xilinx-zynqmp-dma ffac0000.dma: ZynqMP DMA driver Probe success
8306[ 2.394672] xilinx-zynqmp-dma ffad0000.dma: ZynqMP DMA driver Probe success
8307[ 2.401587] xilinx-zynqmp-dma ffae0000.dma: ZynqMP DMA driver Probe success
8308[ 2.408504] xilinx-zynqmp-dma ffaf0000.dma: ZynqMP DMA driver Probe success
8309[ 2.436712] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
8310[ 2.444186] ff000000.serial: ttyPS1 at MMIO 0xff000000 (irq = 46, base_baud = 6250000) is a xuartps
8311[ 2.453275] ff010000.serial: ttyPS0 at MMIO 0xff010000 (irq = 47, base_baud =·r¢²0000) is a xuartps
8312 ºêconsole [ttyPS0] enabled
8313[ 2.462217] console [ttyPS0] enabled
8314[ 2.469182] bootconsole [cdns0] disabled
8315[ 2.469182] bootconsole [cdns0] disabled
8316[ 2.477250] Unable to detect cache hierarchy from DT for CPU 0
8317[ 2.487708] brd: module loaded
8318[ 2.493491] loop: module loaded
8319[ 2.497474] ahci-ceva fd0c0000.ahci: AHCI 0001.0301 32 slots 2 ports 6 Gbps 0x3 impl platform mode
8320[ 2.506357] ahci-ceva fd0c0000.ahci: flags: 64bit ncq sntf pm clo only pmp fbs pio slum part ccc sds apst
8321[ 2.517111] scsi host0: ahci-ceva
8322[ 2.520531] scsi host1: ahci-ceva
8323[ 2.523871] ata1: SATA max UDMA/133 mmio [mem 0xfd0c0000-0xfd0c1fff] port 0x100 irq 43
8324[ 2.531703] ata2: SATA max UDMA/133 mmio [mem 0xfd0c0000-0xfd0c1fff] port 0x180 irq 43
8325[ 2.539756] mtdoops: mtd device (mtddev=name/number) must be supplied
8326[ 2.547102] zynqmp-qspi ff0f0000.spi: rx bus width not found
8327[ 2.553040] m25p80 spi0.0: found n25q00, expected n25q512a
8328[ 2.558767] m25p80 spi0.0: n25q00 (131072 Kbytes)
8329[ 2.563407] 5 ofpart partitions found on MTD device spi0.0
8330[ 2.568853] Creating 5 MTD partitions on "spi0.0":
8331[ 2.573629] 0x000000000000-0x000000500000 : "boot"
8332[ 2.578892] 0x000000500000-0x000000540000 : "bootenv"
8333[ 2.584292] 0x000000540000-0x000002740000 : "kernel"
8334[ 2.589594] 0x000002740000-0x000003740000 : "user"
8335[ 2.594730] 0x000003740000-0x000003750000 : "test"
8336[ 2.600711] libphy: Fixed MDIO Bus: probed
8337[ 2.605814] tun: Universal TUN/TAP device driver, 1.6
8338[ 2.610780] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
8339[ 2.617070] CAN device driver interface
8340[ 2.621387] macb ff0c0000.ethernet: Not enabling partial store and forward
8341[ 2.628692] libphy: MACB_mii_bus: probed
8342[ 2.706944] macb ff0c0000.ethernet eth0: Cadence GEM rev 0x50070106 at 0xff0c0000 irq 30 (00:0a:35:00:22:01)
8343[ 2.716688] Marvell 88E1510 ff0c0000.etherne:00: attached PHY driver [Marvell 88E1510] (mii_bus:phy_addr=ff0c0000.etherne:00, irq=-1)
8344[ 2.729289] usbcore: registered new interface driver asix
8345[ 2.734652] usbcore: registered new interface driver ax88179_178a
8346[ 2.740696] usbcore: registered new interface driver cdc_ether
8347[ 2.746516] usbcore: registered new interface driver net1080
8348[ 2.752154] usbcore: registered new interface driver cdc_subset
8349[ 2.758058] usbcore: registered new interface driver zaurus
8350[ 2.763624] usbcore: registered new interface driver cdc_ncm
8351[ 2.769583] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
8352[ 2.776029] ehci-pci: EHCI PCI platform driver
8353[ 2.780680] usbcore: registered new interface driver uas
8354[ 2.785942] usbcore: registered new interface driver usb-storage
8355[ 2.792184] mousedev: PS/2 mouse device common for all mice
8356[ 2.798067] rtc_zynqmp ffa60000.rtc: rtc core: registered ffa60000.rtc as rtc0
8357[ 2.805234] i2c /dev entries driver
8358[ 2.808865] cdns-i2c ff020000.i2c: 400 kHz mmio ff020000 irq 32
8359[ 2.814921] cdns-i2c ff030000.i2c: 400 kHz mmio ff030000 irq 33
8360[ 2.821704] usbcore: registered new interface driver uvcvideo
8361[ 2.827362] USB Video Class driver (1.1.1)
8362[ 2.831796] Bluetooth: HCI UART driver ver 2.3
8363[ 2.836157] Bluetooth: HCI UART protocol H4 registered
8364[ 2.841273] Bluetooth: HCI UART protocol BCSP registered
8365[ 2.846568] Bluetooth: HCI UART protocol LL registered
8366[ 2.851689] Bluetooth: HCI UART protocol ATH3K registered
8367[ 2.852893] ata2: SATA link down (SStatus 0 SControl 330)
8368[ 2.852933] ata1: SATA link down (SStatus 0 SControl 330)
8369[ 2.867833] Bluetooth: HCI UART protocol Three-wire (H5) registered
8370[ 2.874121] Bluetooth: HCI UART protocol Intel registered
8371[ 2.879500] Bluetooth: HCI UART protocol Broadcom registered
8372[ 2.885108] Bluetooth: HCI UART protocol QCA registered
8373[ 2.890348] usbcore: registered new interface driver bcm203x
8374[ 2.895987] usbcore: registered new interface driver bpa10x
8375[ 2.901545] usbcore: registered new interface driver bfusb
8376[ 2.907012] usbcore: registered new interface driver btusb
8377[ 2.912450] Bluetooth: Generic Bluetooth SDIO driver ver 0.1
8378[ 2.918142] usbcore: registered new interface driver ath3k
8379[ 2.923681] EDAC MC: ECC not enabled
8380[ 2.927306] EDAC DEVICE0: Giving out device to module edac controller cache_err: DEV edac (POLLED)
8381[ 2.936333] EDAC DEVICE1: Giving out device to module zynqmp-ocm-edac controller zynqmp_ocm: DEV ff960000.memory-controller (INTERRUPT)
8382[ 2.948617] sdhci: Secure Digital Host Controller Interface driver
8383[ 2.954712] sdhci: Copyright(c) Pierre Ossman
8384[ 2.959051] sdhci-pltfm: SDHCI platform and OF driver helper
8385[ 3.010682] mmc0: SDHCI controller on ff160000.sdhci [ff160000.sdhci] using ADMA 64-bit
8386[ 3.018793] ledtrig-cpu: registered to indicate activity on CPUs
8387[ 3.024836] usbcore: registered new interface driver usbhid
8388[ 3.030325] usbhid: USB HID core driver
8389[ 3.035721] fpga_manager fpga0: Xilinx ZynqMP FPGA Manager registered
8390[ 3.042589] xilinx-dp-snd-pcm dp_snd_pcm0: Xilinx DisplayPort Sound PCM probed
8391[ 3.049752] xilinx-dp-snd-pcm dp_snd_pcm1: Xilinx DisplayPort Sound PCM probed
8392[ 3.057104] PLL: shutdown
8393[ 3.060535] Write failed to divider address:fd1a007c
8394[ 3.065567] PLL: enable
8395[ 3.068091] xilinx-dp-snd-codec dp_snd_codec0: Xilinx DisplayPort Sound Codec probed
8396[ 3.076128] xilinx-dp-snd-card dp_snd_card: xilinx-dp-snd-codec-dai <-> xilinx-dp-snd-codec-dai mapping ok
8397[ 3.085802] xilinx-dp-snd-card dp_snd_card: xilinx-dp-snd-codec-dai <-> xilinx-dp-snd-codec-dai mapping ok
8398[ 3.095638] xilinx-dp-snd-card dp_snd_card: Xilinx DisplayPort Sound Card probed
8399[ 3.103058] pktgen: Packet Generator for packet performance testing. Version: 2.75
8400[ 3.111246] Netfilter messages via NETLINK v0.30.
8401[ 3.115993] ip_tables: (C) 2000-2006 Netfilter Core Team
8402[ 3.121272] Initializing XFRM netlink socket
8403[ 3.125601] NET: Registered protocol family 10
8404[ 3.131438] ip6_tables: (C) 2000-2006 Netfilter Core Team
8405[ 3.136792] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver
8406[ 3.143015] NET: Registered protocol family 17
8407[ 3.147385] NET: Registered protocol family 15
8408[ 3.151812] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this.
8409[ 3.164735] Ebtables v2.0 registered
8410[ 3.168345] can: controller area network core (rev 20120528 abi 9)
8411[ 3.174489] NET: Registered protocol family 29
8412[ 3.178885] can: raw protocol (rev 20120528)
8413[ 3.185144] can: broadcast manager protocol (rev 20161123 t)
8414[ 3.192724] can: netlink gateway (rev 20130117) max_hops=1
8415[ 3.198174] Bluetooth: RFCOMM TTY layer initialized
8416[ 3.204994] Bluetooth: RFCOMM socket layer initialized
8417[ 3.212066] Bluetooth: RFCOMM ver 1.11
8418[ 3.215745] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
8419[ 3.221024] Bluetooth: BNEP filters: protocol multicast
8420[ 3.226236] Bluetooth: BNEP socket layer initialized
8421[ 3.231180] Bluetooth: HIDP (Human Interface Emulation) ver 1.2
8422[ 3.237086] Bluetooth: HIDP socket layer initialized
8423[ 3.242204] 9pnet: Installing 9P2000 support
8424[ 3.246407] Key type dns_resolver registered
8425[ 3.253039] registered taskstats version 1
8426[ 3.259461] Btrfs loaded, crc32c=crc32c-generic
8427[ 3.272413] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller
8428[ 3.277836] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 1
8429[ 3.285704] xhci-hcd xhci-hcd.0.auto: hcc params 0x0238f625 hci version 0x100 quirks 0x02010010
8430[ 3.294362] xhci-hcd xhci-hcd.0.auto: irq 229, io mem 0xfe300000
8431[ 3.300429] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
8432[ 3.307134] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
8433[ 3.314337] usb usb1: Product: xHCI Host Controller
8434[ 3.319199] usb usb1: Manufacturer: Linux 4.9.0 xhci-hcd
8435[ 3.324491] usb usb1: SerialNumber: xhci-hcd.0.auto
8436[ 3.329655] hub 1-0:1.0: USB hub found
8437[ 3.333339] hub 1-0:1.0: 1 port detected
8438[ 3.337345] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller
8439[ 3.342751] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 2
8440[ 3.350424] usb usb2: We don't know the algorithms for LPM for this host, disabling LPM.
8441[ 3.358520] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003
8442[ 3.365227] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
8443[ 3.372430] usb usb2: Product: xHCI Host Controller
8444[ 3.377290] usb usb2: Manufacturer: Linux 4.9.0 xhci-hcd
8445[ 3.382585] usb usb2: SerialNumber: xhci-hcd.0.auto
8446[ 3.387659] hub 2-0:1.0: USB hub found
8447[ 3.391344] hub 2-0:1.0: 1 port detected
8448[ 3.395616] rtc_zynqmp ffa60000.rtc: setting system clock to 2018-07-26 08:54:51 UTC (1532595291)
8449[ 3.404510] clk: Not disabling unused clocks
8450[ 3.408698] ALSA device list:
8451[ 3.411646] #0: DisplayPort monitor
8452[ 3.415913] Freeing unused kernel memory: 448K (ffffffc000b70000 - ffffffc000be0000)
8453INIT: version 2.88 booting
8454Starting udev
8455[ 3.528970] udevd[1612]: starting version 3.2
8456[ 3.533636] random: udevd: uninitialized urandom read (16 bytes read)
8457[ 3.540068] random: udevd: uninitialized urandom read (16 bytes read)
8458[ 3.546484] random: udevd: uninitialized urandom read (16 bytes read)
8459[ 3.552878] random: udevd: uninitialized urandom read (16 bytes read)
8460[ 3.562918] udevd[1613]: starting eudev-3.2
8461[ 3.601142] random: udevd: uninitialized urandom read (16 bytes read)
8462[ 3.607572] random: udevd: uninitialized urandom read (16 bytes read)
8463[ 3.622422] random: udevd: uninitialized urandom read (16 bytes read)
8464[ 3.632422] random: udevd: uninitialized urandom read (16 bytes read)
8465[ 3.643679] 4fm: loading out-of-tree module taints kernel.
8466[ 3.656680] <dma1> init: registered
8467[ 3.656792] pci 0000:00:00.0: enabling device (0000 -> 0002)
8468[ 3.656804] 4FM 0000:01:00.0: enabling device (0000 -> 0002)
8469[ 3.656814] Accessing 47232 of total 1 entries in dev->bar
8470[ 3.656833] dev->bar[u].virt_address:cf3d07c value:38011121
8471[ 3.656835] dev->bar[u].virt_address:cf3d080 value:deadbeef
8472[ 3.656838] dev->bar[u].virt_address:cf3d084 value:baadf00d
8473[ 3.656840] dev->bar[u].virt_address:cf3d088 value:eba00eba
8474[ 3.656843] dev->bar[u].virt_address:cf3d08c value:beefdeaf
8475[ 3.658217] /media/yocto4/vp880/VP88x_2017_3_PRJ0191/build/tmp/work/plnx_aarch64-xilinx-linux/4fm/1.0-r0/4fm.c: found 1 devices
8476[ 3.770158] <dma2> init: registered
8477Populating dev cache
8478[ 4.166148] random: dd: uninitialized urandom read (512 bytes read)
8479Starting internet superserver: inetd.
8480Running postinst /etc/rpm-postinsts/100-sysvinit-inittab...
8481update-rc.d: /etc/init.d/run-postinsts exists during rc.d purge (continuing)
8482INIT: Entering runlevel: 5
8483Hello World
8484[22]:0x12
8485[20]:0x201
8486[20]:0x201
8487[22]:0x1
8488[0]:0x140
8489[0]:0x140
8490Configuring network interfaces... [ 4.457306] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
8491done.
8492Starting Dropbear SSH server: [ 4.486074] random: dropbearkey: uninitialized urandom read (32 bytes read)
8493Generating key, this may take a while...
8494[ 5.490792] macb ff0c0000.ethernet eth0: link up (1000/Full)
8495[ 5.496394] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
8496Public key portion is:
8497ssh-rsa AAAAB3NzaC1yc2EAAAADAQABAAABAQCCljqy7I1N8nZDWucdAuaz0OwX18gwxE9P2Ml5vj8PkJNKm1WC8jUrHpWPGU7Xdo9k2vILRGCtTLCMdYMcVo9nab1LIY72KIeLy4R6RJexXBywKT7xmaY3w9yLjg2y5KNjDSXF6eOM3TTlBjoCZyWCo5GiFt5xudx0xaehgfPnXF2sG6WkPMWxANDb7xrLssQm347YAvyFIzDwBqphQawlRZYidx2D3NiFulWAyfPDf8BMEFjkQunxjTadc3r55wiEfMsPFUkxy14Xr1BePYvkNwdISfwsQEaIf2WjDrz6O430O+8jJ8cO8szSU9hf4oEwYmrBi3cQUJNS66E8DPpp root@VP88x_2017_3_PRJ0191
8498Fingerprint: md5 39:6b:57:9b:40:2f:d1:83:73:5a:0b:bd:4a:63:77:8e
8499dr[ 6.148053] random: fast init done
8500opbear.
8501Starting syslogd/klogd: done
8502[ 6.586357] random: crng init done
8503[ 8.321598] jffs2: notice: (2070) jffs2_build_xattr_subsystem: complete building xattr subsystem, 0 of xdatum (0 unchecked, 0 orphan) and 0 of xref (0 dead, 0 orphan) found.
8504hello world.....
8505Starting tcf-agent: OK
8506
8507root@VP88x_2017_3_PRJ0191:~# Fmc134APP 0 1 1 1 1
8508UnitAPI version : 1.3.8 : Enumerating units in the system, please wait...
8509
8510Global Units:
8511Global Unit 0 is on Device 'VP880' (P0): Internal Unit 0 is star 0x01C4 (axi_vp880_8l_host_if) with index 1 of star type 0x000D (Host Interface)
8512Global Unit 1 is on Device 'VP880' (P0): Internal Unit 1 is star 0x0203 (Unknown) with index 0 of star type 0x0005 (ADC)
8513Global Unit 2 is on Device 'VP880' (P0): Internal Unit 2 is star 0x015C (axi_intrc16) with index 0 of star type 0x0014 (Interrupt Controller)
8514Global Unit 3 is on Device 'VP880' (P0): Internal Unit 3 is star 0x014C (axi_i2c_master) with index 0 of star type 0x000E (3rd Party Logic)
8515Global Unit 4 is on Device 'VP880' (P0): Internal Unit 4 is star 0x0202 (Unknown) with index 0 of star type 0x0003 (Memory FIFO)
8516Global Unit 5 is on Device 'VP880' (P0): Internal Unit 5 is star 0x01C5 (axi_vp880_ddr4_fifo) with index 0 of star type 0x0003 (Memory FIFO)
8517
8518
8519Running 'VP880-FMC134' on PCIe, CID725
8520
8521-----------------------------------------------------------
8522Device 'VP880' (P0)
8523-----------------------------------------------------------
8524Constellation ID : 759
8525Number Of Stars : 19
8526Software Build Code: 1524177589 (Thu Apr 19 22:39:49 2018)
8527Firmware Build Code: 0
8528Firmware Revision : 1.2
8529-----------------------------------------------------------
8530
8531 - Unit 0 is VP88x host interface star
8532
8533-------- Onboard Monitoring (ADC Monitor) ---------
8534Temp ( AD7291 ) : OK (53.25C)
8535Vin0 ( ADC0 1.1Va ) : OK ( 1.13V)
8536Vin1 ( ADC0 1.1Vdig ) : OK ( 1.12V)
8537Vin2 ( ADC0 1.9Va ) : OK ( 1.92V)
8538Vin3 ( ADC1 1.1Va ) : OK ( 1.14V)
8539Vin4 ( ADC1 1.1Vdig ) : OK ( 1.13V)
8540Vin5 ( ADC1 1.9Va ) : OK ( 1.92V)
8541
8542Vin6 ( ADC0 raw ) : OK (0.684V)
8543Vin6 ( ADC0 Temp ) : OK (66.12C)
8544
8545Vin7 ( ADC1 raw ) : OK (0.684V)
8546Vin7 ( ADC1 Temp ) : OK (66.12C)
8547---------------------------------------------------
8548
8549
8550-------- Onboard Monitoring (Voltage Monitor) ---------
8551Temp ( AD7291 ) : OK (52.50C)
8552Vin0 ( 5.5Vosc ) : OK ( 5.50V)
8553Vin1 ( 3.3Vclk ) : OK ( 3.25V)
8554Vin2 ( 3.3Vlmx ) : OK ( 3.30V)
8555Vin3 ( 1.8Vcpld ) : OK ( 1.80V)
8556Vin4 ( Vadj ) : OK ( 1.82V)
8557Vin5 ( 3.3Vfmc ) : OK ( 3.25V)
8558Vin6 ( 12.0Vfmc ) : OK (11.97V)
8559Vin7 ( Viob ) : OK ( 1.81V)
8560-------------------------------------------------------
8561
8562Configuring clock tree ...
8563
8564
8565 Setting Clock_Mode
8566Internal Reference Mode
8567^C
8568root@VP88x_2017_3_PRJ0191:~# Fmc134APP 0 1 1 1 1^C
8569root@VP88x_2017_3_PRJ0191:~# lspci -vvv
857000:00.0 PCI bridge: Xilinx Corporation Device d024 (prog-if 00 [Normal decode])
8571 Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
8572 Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
8573 Latency: 0
8574 Interrupt: pin A routed to IRQ 255
8575 Bus: primary=00, secondary=01, subordinate=0c, sec-latency=0
8576 I/O behind bridge: 00000000-00000fff
8577 Memory behind bridge: e0000000-e00fffff
8578 Prefetchable memory behind bridge: 00000000fff00000-00000000000fffff
8579 Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
8580 BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
8581 PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
8582 Capabilities: [40] Power Management version 3
8583 Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold-)
8584 Status: D0 NoSoftRst+ PME-Enable- DSel=0 DScale=0 PME-
8585 Capabilities: [60] Express (v2) Root Port (Slot-), MSI 00
8586 DevCap: MaxPayload 256 bytes, PhantFunc 0
8587 ExtTag- RBE+
8588 DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
8589 RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop+
8590 MaxPayload 128 bytes, MaxReadReq 512 bytes
8591 DevSta: CorrErr+ UncorrErr- FatalErr- UnsuppReq- AuxPwr- TransPend+
8592 LnkCap: Port #0, Speed 5GT/s, Width x2, ASPM not supported, Exit Latency L0s unlimited, L1 unlimited
8593 ClockPM- Surprise- LLActRep- BwNot+ ASPMOptComp+
8594 LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- CommClk-
8595 ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
8596 LnkSta: Speed 5GT/s, Width x2, TrErr- Train- SlotClk+ DLActive- BWMgmt+ ABWMgmt+
8597 RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal- PMEIntEna- CRSVisible+
8598 RootCap: CRSVisible+
8599 RootSta: PME ReqID 0000, PMEStatus- PMEPending-
8600 DevCap2: Completion Timeout: Range B, TimeoutDis+, LTR-, OBFF Not Supported ARIFwd-
8601 DevCtl2: Completion Timeout: 50us to 50ms, TimeoutDis-, LTR-, OBFF Disabled ARIFwd-
8602 LnkCtl2: Target Link Speed: 5GT/s, EnterCompliance- SpeedDis-
8603 Transmit Margin: Normal Operating Range, EnterModifiedCompliance- ComplianceSOS-
8604 Compliance De-emphasis: -6dB
8605 LnkSta2: Current De-emphasis Level: -6dB, EqualizationComplete-, EqualizationPhase1-
8606 EqualizationPhase2-, EqualizationPhase3-, LinkEqualizationRequest-
8607 Capabilities: [100 v1] Device Serial Number 00-00-00-00-00-00-00-00
8608 Capabilities: [10c v1] Virtual Channel
8609 Caps: LPEVC=0 RefClk=100ns PATEntryBits=1
8610 Arb: Fixed- WRR32- WRR64- WRR128-
8611 Ctrl: ArbSelect=Fixed
8612 Status: InProgress-
8613 VC0: Caps: PATOffset=00 MaxTimeSlots=1 RejSnoopTrans-
8614 Arb: Fixed- WRR32- WRR64- WRR128- TWRR128- WRR256-
8615 Ctrl: Enable+ ID=0 ArbSelect=Fixed TC/VC=ff
8616 Status: NegoPending- InProgress-
8617 Capabilities: [128 v1] Vendor Specific Information: ID=1234 Rev=1 Len=018 <?>
8618
861901:00.0 Communication controller: Xilinx Corporation Device b880
8620 Subsystem: Xilinx Corporation Device b880
8621 Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
8622 Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
8623 Latency: 0
8624 Interrupt: pin A routed to IRQ 231
8625 Region 0: Memory at e0000000 (32-bit, non-prefetchable) [size=2K]
8626 Capabilities: [80] Power Management version 3
8627 Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
8628 Status: D0 NoSoftRst+ PME-Enable- DSel=0 DScale=0 PME-
8629 Capabilities: [90] MSI: Enable- Count=1/1 Maskable- 64bit+
8630 Address: 0000000000000000 Data: 0000
8631 Capabilities: [c0] Express (v2) Endpoint, MSI 00
8632 DevCap: MaxPayload 512 bytes, PhantFunc 0, Latency L0s <64ns, L1 <1us
8633 ExtTag- AttnBtn- AttnInd- PwrInd- RBE+ FLReset- SlotPowerLimit 0.000W
8634 DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
8635 RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop+
8636 MaxPayload 128 bytes, MaxReadReq 512 bytes
8637 DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr- TransPend-
8638 LnkCap: Port #0, Speed 8GT/s, Width x2, ASPM not supported, Exit Latency L0s unlimited, L1 unlimited
8639 ClockPM- Surprise- LLActRep- BwNot- ASPMOptComp+
8640 LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- CommClk-
8641 ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
8642 LnkSta: Speed 5GT/s, Width x2, TrErr- Train- SlotClk- DLActive- BWMgmt- ABWMgmt-
8643 DevCap2: Completion Timeout: Range B, TimeoutDis+, LTR-, OBFF Not Supported
8644 DevCtl2: Completion Timeout: 50us to 50ms, TimeoutDis-, LTR-, OBFF Disabled
8645 LnkCtl2: Target Link Speed: 8GT/s, EnterCompliance- SpeedDis-
8646 Transmit Margin: Normal Operating Range, EnterModifiedCompliance- ComplianceSOS-
8647 Compliance De-emphasis: -6dB
8648 LnkSta2: Current De-emphasis Level: -6dB, EqualizationComplete-, EqualizationPhase1-
8649 EqualizationPhase2-, EqualizationPhase3-, LinkEqualizationRequest-
8650 Capabilities: [100 v2] Advanced Error Reporting
8651 UESta: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol-
8652 UEMsk: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol-
8653 UESvrt: DLP+ SDES+ TLP- FCP+ CmpltTO- CmpltAbrt- UnxCmplt- RxOF+ MalfTLP+ ECRC- UnsupReq- ACSViol-
8654 CESta: RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr-
8655 CEMsk: RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr+
8656 AERCap: First Error Pointer: 00, GenCap- CGenEn- ChkCap- ChkEn-
8657 Capabilities: [300 v1] #19
8658 Kernel driver in use: 4FM
8659 Kernel modules: 4fm
8660
8661root@VP88x_2017_3_PRJ0191:~# ^C
8662root@VP88x_2017_3_PRJ0191:~# lspci -vvv
866300:00.0 PCI bridge: Xilinx Corporation Device d024 (prog-if 00 [Normal decode])
8664 Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
8665 Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
8666 Latency: 0
8667 Interrupt: pin A routed to IRQ 255
8668 Bus: primary=00, secondary=01, subordinate=0c, sec-latency=0
8669 I/O behind bridge: 00000000-00000fff
8670 Memory behind bridge: e0000000-e00fffff
8671 Prefetchable memory behind bridge: 00000000fff00000-00000000000fffff
8672 Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
8673 BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
8674 PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
8675 Capabilities: [40] Power Management version 3
8676 Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold-)
8677 Status: D0 NoSoftRst+ PME-Enable- DSel=0 DScale=0 PME-
8678 Capabilities: [60] Express (v2) Root Port (Slot-), MSI 00
8679 DevCap: MaxPayload 256 bytes, PhantFunc 0
8680 ExtTag- RBE+
8681 DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
8682 RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop+
8683 MaxPayload 128 bytes, MaxReadReq 512 bytes
8684 DevSta: CorrErr+ UncorrErr- FatalErr- UnsuppReq- AuxPwr- TransPend+
8685 LnkCap: Port #0, Speed 5GT/s, Width x2, ASPM not supported, Exit Latency L0s unlimited, L1 unlimited
8686 ClockPM- Surprise- LLActRep- BwNot+ ASPMOptComp+
8687 LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- CommClk-
8688 ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
8689 LnkSta: Speed 5GT/s, Width x2, TrErr- Train- SlotClk+ DLActive- BWMgmt+ ABWMgmt+
8690 RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal- PMEIntEna- CRSVisible+
8691 RootCap: CRSVisible+
8692 RootSta: PME ReqID 0000, PMEStatus- PMEPending-
8693 DevCap2: Completion Timeout: Range B, TimeoutDis+, LTR-, OBFF Not Supported ARIFwd-
8694 DevCtl2: Completion Timeout: 50us to 50ms, TimeoutDis-, LTR-, OBFF Disabled ARIFwd-
8695 LnkCtl2: Target Link Speed: 5GT/s, EnterCompliance- SpeedDis-
8696 Transmit Margin: Normal Operating Range, EnterModifiedCompliance- ComplianceSOS-
8697 Compliance De-emphasis: -6dB
8698 LnkSta2: Current De-emphasis Level: -6dB, EqualizationComplete-, EqualizationPhase1-
8699 EqualizationPhase2-, EqualizationPhase3-, LinkEqualizationRequest-
8700 Capabilities: [100 v1] Device Serial Number 00-00-00-00-00-00-00-00
8701 Capabilities: [10c v1] Virtual Channel
8702 Caps: LPEVC=0 RefClk=100ns PATEntryBits=1
8703 Arb: Fixed- WRR32- WRR64- WRR128-
8704 Ctrl: ArbSelect=Fixed
8705 Status: InProgress-
8706 VC0: Caps: PATOffset=00 MaxTimeSlots=1 RejSnoopTrans-
8707 Arb: Fixed- WRR32- WRR64- WRR128- TWRR128- WRR256-
8708 Ctrl: Enable+ ID=0 ArbSelect=Fixed TC/VC=ff
8709 Status: NegoPending- InProgress-
8710 Capabilities: [128 v1] Vendor Specific Information: ID=1234 Rev=1 Len=018 <?>
8711
871201:00.0 Communication controller: Xilinx Corporation Device b880
8713 Subsystem: Xilinx Corporation Device b880
8714 Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
8715 Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
8716 Latency: 0
8717 Interrupt: pin A routed to IRQ 231
8718 Region 0: Memory at e0000000 (32-bit, non-prefetchable) [size=2K]
8719 Capabilities: [80] Power Management version 3
8720 Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
8721 Status: D0 NoSoftRst+ PME-Enable- DSel=0 DScale=0 PME-
8722 Capabilities: [90] MSI: Enable- Count=1/1 Maskable- 64bit+
8723 Address: 0000000000000000 Data: 0000
8724 Capabilities: [c0] Express (v2) Endpoint, MSI 00
8725 DevCap: MaxPayload 512 bytes, PhantFunc 0, Latency L0s <64ns, L1 <1us
8726 ExtTag- AttnBtn- AttnInd- PwrInd- RBE+ FLReset- SlotPowerLimit 0.000W
8727 DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
8728 RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop+
8729 MaxPayload 128 bytes, MaxReadReq 512 bytes
8730 DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr- TransPend-
8731 LnkCap: Port #0, Speed 8GT/s, Width x2, ASPM not supported, Exit Latency L0s unlimited, L1 unlimited
8732 ClockPM- Surprise- LLActRep- BwNot- ASPMOptComp+
8733 LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- CommClk-
8734 ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
8735 LnkSta: Speed 5GT/s, Width x2, TrErr- Train- SlotClk- DLActive- BWMgmt- ABWMgmt-
8736 DevCap2: Completion Timeout: Range B, TimeoutDis+, LTR-, OBFF Not Supported
8737 DevCtl2: Completion Timeout: 50us to 50ms, TimeoutDis-, LTR-, OBFF Disabled
8738 LnkCtl2: Target Link Speed: 8GT/s, EnterCompliance- SpeedDis-
8739 Transmit Margin: Normal Operating Range, EnterModifiedCompliance- ComplianceSOS-
8740 Compliance De-emphasis: -6dB
8741 LnkSta2: Current De-emphasis Level: -6dB, EqualizationComplete-, EqualizationPhase1-
8742 EqualizationPhase2-, EqualizationPhase3-, LinkEqualizationRequest-
8743 Capabilities: [100 v2] Advanced Error Reporting
8744 UESta: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol-
8745 UEMsk: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol-
8746 UESvrt: DLP+ SDES+ TLP- FCP+ CmpltTO- CmpltAbrt- UnxCmplt- RxOF+ MalfTLP+ ECRC- UnsupReq- ACSViol-
8747 CESta: RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr-
8748 CEMsk: RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr+
8749 AERCap: First Error Pointer: 00, GenCap- CGenEn- ChkCap- ChkEn-
8750 Capabilities: [300 v1] #19
8751 Kernel driver in use: 4FM
8752 Kernel modules: 4fm
8753
8754root@VP88x_2017_3_PRJ0191:~#