dwK28vaA

1Format: Log Type - Time(microsec) - Message - Optional Info
2Log Type: B - Since Boot(Power On Reset),  D - Delta,  S - Statistic
3S - QC_IMAGE_VERSION_STRING=BOOT.BF.3.1.2.C2-00037
4S - IMAGE_VARIANT_STRING=DAASANAZA
5S - OEM_IMAGE_VERSION_STRING=administrator-p
6S - Boot Config, 0x000000e1
7B -      1566 - PBL, Start
8B -      4542 - bootable_media_detect_entry, Start
9B -    176032 - bootable_media_detect_success, Start
10B -    176036 - elf_loader_entry, Start
11B -    176648 - auth_hash_seg_entry, Start
12B -    176909 - auth_hash_seg_exit, Start
13B -    190795 - elf_segs_hash_verify_entry, Start
14B -    249906 - PBL, End
15B -    262757 - SBL1, Start
16B -    321195 - boot_flash_init, Start
17D -        30 - boot_flash_init, Delta
18B -    327844 - boot_config_data_table_init, Start
19D -      6954 - boot_config_data_table_init, Delta - (0 Bytes)
20B -    339404 - CDT version:3,Platform ID:8,Major ID:1,Minor ID:0,Subtype:0
21B -    345595 - pm_device_init, Start
22B -    348920 - pm_device_init, TEST - MSM8909 detected
23B -    354288 - pm_device_init, INFO - PM8909 is selected
24B -    368684 - PM_SET_VAL:Skip
25D -     21441 - pm_device_init, Delta
26B -    370087 - sbl1_ddr_set_params, Start
27B -    372466 - cpr_init, Start
28D -         0 - cpr_init, Delta
29B -    378108 - Pre_DDR_clock_init, Start
30D -       213 - Pre_DDR_clock_init, Delta
31D -         0 - sbl1_ddr_set_params, Delta
32B -    391101 - pm_driver_init, Start
33B -    397720 - --> Charge init
34B -      4122 - battery voltage
35B -    401227 - boot up
36B -        10 - Current status
37D -     10736 - pm_driver_init, Delta
38B -    413580 - clock_init, Start
39D -       152 - clock_init, Delta
40B -    414525 - Image Load, Start
41D -     35075 - QSEE Image Loaded, Delta - (490096 Bytes)
42B -    449661 - Image Load, Start
43D -       274 - SEC Image Loaded, Delta - (2048 Bytes)
44B -    457927 - sbl1_efs_handle_cookies, Start
45D -       671 - sbl1_efs_handle_cookies, Delta
46B -    464637 - Image Load, Start
47D -     14213 - RPM Image Loaded, Delta - (156564 Bytes)
48B -    478911 - Image Load, Start
49D -     18818 - APPSBL Image Loaded, Delta - (499160 Bytes)
50B -    497760 - QSEE Execution, Start
51D -       274 - QSEE Execution, Delta
52B -    503494 - SBL1, End
53D -    243024 - SBL1, Delta
54S - Throughput, 25000 KB/s  (1147868 Bytes,  44799 us)
55S - DDR Frequency, 400 MHz
56Android Bootloader - UART_DM Initialized!!!
57[0] [0] welcome to lk
58
59[10] [10] platform_init()
60[10] [10] target_init()
61[50] [50] SDHC Running in HS200 mode
62[60] [60] Done initialization of the card
63[70] [70] pm8x41_get_is_cold_boot: cold boot
64[80] [80] Waiting for the RPM to populate smd channel table
65[80] [80] Not able to search the panel:
66[140] [140] Config MIPI_VIDEO_PANEL.
67[300] [300] Panic Lut0 0 Lut1 fff Robest 0
68[300] [300] ERROR: Splash image header invalid
69[330] [330] Turn on MIPI_VIDEO_PANEL.
70[350] [350] Video lane tested successfully
71CTRL+C: enter instruction mode
72CTRL+C: out instruction mode
73input FCT : enter instruction mode
74[1440] [1440] is_enter_fctmode ch: out fct instruction mode
75[1450] [1450] Recovery command: 32 normal1
76[1450] [1450] Unable to locate /bootselect partition
77[1460] [1460] boot_verifier: Device is in ORANGE boot state.
78[1460] [1460] Device is unlocked! Skipping verification...
79[1470] [1470] Loading boot image (16896000): start
80[1580] [1580] Loading boot image (16896000): done
81[1580] [1580] use_signed_kernel=1, is_unlocked=1, is_tampered=0.
82[1610] [1610] Best match DTB tags 245/00000008/0x00000000/0/1000d/0/0/0/90a3f928/2825b
83[1620] [1620] Using pmic info 0x1000d/0x0/0x0/0x0 for device 0x1010d/0x0/0x0/0x0
84[1620] [1620] cmdline: console=ttyHSL0,115200,n8 androidboot.console=ttyHSL0 androidboot.hardware=qcom msm_rtb.filter=0x237 ehci-hcd.park=3 androidboot.bootdevice=7824900.sdhci lpm_levels.sleep_disabled=1 earlyprintk buildvariant=userdebug androidboot.bootdevice=782490[1650] [1650] Updating device tree: start
85[1660] [1660] Updating device tree: done
86[1670] [1670] Channel alloc freed
87[1680] [1680] Turn off MIPI_VIDEO_PANEL.
88[1680] [1680] Continuous splash enabled, keeping panel alive.
89[1680] [1680] booting linux @ 0x80008000, ramdisk @ 0x82000000 (1350266), tags/device tree @ 0x81e00000
90[    0.000000] Booting Linux on physical CPU 0x0
91[    0.000000] Initializing cgroup subsys cpu
92[    0.000000] Initializing cgroup subsys cpuacct
93[    0.000000] Linux version 3.10.49-gc25540a-00013-gb501ab6 (BspDeveloper2@BspDeveloper2) (gcc version 4.8 (GCC) ) #8 SMP PREEMPT Wed Sep 25 17:31:11 IST 2019
94[    0.000000] CPU: ARMv7 Processor [410fc075] revision 5 (ARMv7), cr=10c5387d
95[    0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
96[    0.000000] Machine: Qualcomm Technologies, Inc. MSM 8909 (Flattened Device Tree), model: Qualcomm Technologies, Inc. MSM8909-PM8909 1GB MTP
97[    0.000000] cma: Found external_image__region@0, memory base 0x87a00000, size 6 MiB, limit 0xffffffff
98[    0.000000] cma: Found modem_adsp_region@0, memory base 0x88000000, size 85 MiB, limit 0xffffffff
99[    0.000000] cma: Found pheripheral_region@0, memory base 0x8d500000, size 7 MiB, limit 0xffffffff
100[    0.000000] cma: Found venus_qseecom_region@0, memory base 0x00000000, size 6 MiB, limit 0x90000000
101[    0.000000] cma: Found audio_region@0, memory base 0x00000000, size 3 MiB, limit 0xffffffff
102[    0.000000] cma: Found splash_region@83000000, memory base 0x83000000, size 12 MiB, limit 0xffffffff
103[    0.000000] cma: CMA: reserved 6 MiB at 0x87a00000 for external_image_mem
104[    0.000000] cma: CMA: reserved 85 MiB at 0x88000000 for modem_adsp_mem
105[    0.000000] cma: CMA: reserved 7 MiB at 0x8d500000 for peripheral_mem
106[    0.000000] cma: CMA: reserved 8 MiB at 0x8f800000 for venus_qseecom_mem
107[    0.000000] cma: CMA: reserved 4 MiB at 0xff800000 for audio_mem
108[    0.000000] cma: CMA: reserved 12 MiB at 0x83000000 for cont_splash_mem
109[    0.000000] cma: CMA: reserved 8 MiB at 0xaf000000 for default region
110[    0.000000] Memory policy: ECC disabled, Data cache writealloc
111[    0.000000] PERCPU: Embedded 14 pages/cpu @c6c54000 s33472 r8192 d15680 u57344
112[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 494639
113[    0.000000] Kernel command line: sched_enable_hmp=1 console=ttyHSL0,115200,n8 androidboot.console=ttyHSL0 androidboot.hardware=qcom msm_rtb.filter=0x237 ehci-hcd.park=3 androidboot.bootdevice=7824900.sdhci lpm_levels.sleep_disabled=1 earlyprintk buildvariant=userdebug androidboot.bootdevice=7824900.sdhci androidboot.serialno=3122bcdb androidboot.baseband=msm mdss_mdp3.panel=1:dsi:0:qcom,mdss_dsi_ili9881c_720p_video:1:none
114[    0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
115[    0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
116[    0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
117[    0.000000] Memory: 1893768K/1996796K available (10541K kernel code, 1078K rwdata, 4600K rodata, 1420K init, 1349K bss, 103028K reserved, 1314812K highmem)
118[    0.000000] Virtual kernel memory layout:
119[    0.000000]     vector  : 0xffff0000 - 0xffff1000   (   4 kB)
120[    0.000000]     fixmap  : 0xfff00000 - 0xfffe0000   ( 896 kB)
121[    0.000000]     vmalloc : 0xf0000000 - 0xff000000   ( 240 MB)
122[    0.000000]     lowmem  : 0xc0000000 - 0xef800000   ( 760 MB)
123[    0.000000]     pkmap   : 0xbfe00000 - 0xc0000000   (   2 MB)
124[    0.000000]     modules : 0xbf000000 - 0xbfe00000   (  14 MB)
125[    0.000000]       .text : 0xc0008000 - 0xc0fc96f4   (16134 kB)
126[    0.000000]       .init : 0xc1000000 - 0xc11632c0   (1421 kB)
127[    0.000000]       .data : 0xc1164000 - 0xc127199c   (1079 kB)
128[    0.000000]        .bss : 0xc1271a60 - 0xc13c2fe4   (1350 kB)
129[    0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
130[    0.000000] HMP scheduling enabled.
131[    0.000000] Preemptible hierarchical RCU implementation.
132[    0.000000] 	RCU dyntick-idle grace-period acceleration is enabled.
133[    0.000000] NR_IRQS:16 nr_irqs:16 16
134[    0.000000] Architected cp15 and mmio timer(s) running at 19.20MHz (virt/virt).
135[    0.000000] sched_clock: 56 bits at 19MHz, resolution 52ns, wraps every 3579139424256ns
136[    0.000000] Switching to timer-based delay loop
137[    0.000000] sched_clock: 32 bits at 19MHz, resolution 52ns, wraps every 223696213963ns
138[    0.000000] Console: colour dummy device 80x30
139[    0.000000] kmemleak: Kernel memory leak detector disabled
140[    0.000839] Calibrating delay loop (skipped), value calculated using timer frequency.. 38.40 BogoMIPS (lpj=192000)
141[    0.000858] pid_max: default: 32768 minimum: 301
142[    0.001220] Security Framework initialized
143[    0.001264] SELinux:  Initializing.
144[    0.001547] Mount-cache hash table entries: 512
145[    0.003225] Initializing cgroup subsys debug
146[    0.003245] Initializing cgroup subsys freezer
147[    0.003299] CPU: Testing write buffer coherency: ok
148[    0.004151] /cpus/cpu@0 missing clock-frequency property
149[    0.004175] /cpus/cpu@1 missing clock-frequency property
150[    0.004194] /cpus/cpu@2 missing clock-frequency property
151[    0.004215] /cpus/cpu@3 missing clock-frequency property
152[    0.004231] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
153[    0.004390] Setting up static identity map for 0xc0ab1178 - 0xc0ab11d0
154[    0.006496] ftrace: Allocated trace_printk buffers
155[    0.031287] MSM Memory Dump base table set up
156[    0.031376] MSM Memory Dump apps data table set up
157[    0.031424] Configuring XPU violations to be fatal errors
158[    0.041337] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001
159[    0.051293] CPU2: thread -1, cpu 2, socket 0, mpidr 80000002
160[    0.061003] CPU3: thread -1, cpu 3, socket 0, mpidr 80000003
161[    0.061303] Brought up 4 CPUs
162[    0.061335] SMP: Total of 4 processors activated (153.60 BogoMIPS).
163[    0.061345] CPU: All CPU(s) started in SVC mode.
164[    0.083234] VFP support v0.3: implementor 41 architecture 2 part 30 variant 7 rev 5
165[    0.083269] ------------[ cut here ]------------
166[    0.083295] WARNING: at /home/nvme/sc20/kernel/fs/proc/generic.c:102 __xlate_proc_name+0xa0/0xb4()
167[    0.083305] name 'cpu/vfp_bounce'
168[    0.083313] Modules linked in:
169[    0.083331] CPU: 0 PID: 1 Comm: swapper/0 Not tainted 3.10.49-gc25540a-00013-gb501ab6 #8
170[    0.083362] [<c010be54>] (unwind_backtrace+0x0/0x11c) from [<c0109a04>] (show_stack+0x10/0x14)
171[    0.083390] [<c0109a04>] (show_stack+0x10/0x14) from [<c0121784>] (warn_slowpath_common+0x4c/0x6c)
172[    0.083416] [<c0121784>] (warn_slowpath_common+0x4c/0x6c) from [<c01217d0>] (warn_slowpath_fmt+0x2c/0x3c)
173[    0.083440] [<c01217d0>] (warn_slowpath_fmt+0x2c/0x3c) from [<c024ba0c>] (__xlate_proc_name+0xa0/0xb4)
174[    0.083463] [<c024ba0c>] (__xlate_proc_name+0xa0/0xb4) from [<c024ba6c>] (__proc_create+0x4c/0xf4)
175[    0.083486] [<c024ba6c>] (__proc_create+0x4c/0xf4) from [<c024be50>] (proc_create_data+0x58/0x98)
176[    0.083513] [<c024be50>] (proc_create_data+0x58/0x98) from [<c1002e34>] (vfp_init+0x16c/0x1d8)
177[    0.083537] [<c1002e34>] (vfp_init+0x16c/0x1d8) from [<c0100670>] (do_one_initcall+0xb8/0x160)
178[    0.083561] [<c0100670>] (do_one_initcall+0xb8/0x160) from [<c1000be4>] (kernel_init_freeable+0x10c/0x1d0)
179[    0.083586] [<c1000be4>] (kernel_init_freeable+0x10c/0x1d0) from [<c0a9702c>] (kernel_init+0x8/0xe4)
180[    0.083609] [<c0a9702c>] (kernel_init+0x8/0xe4) from [<c0105ff8>] (ret_from_fork+0x14/0x3c)
181[    0.083658] ---[ end trace da227214a82491b7 ]---
182[    0.083668] Failed to create procfs node for VFP bounce reporting
183[    0.087171] pinctrl core: initialized pinctrl subsystem
184[    0.087782] regulator-dummy: no parameters
185[    0.103502] NET: Registered protocol family 16
186[    0.117892] DMA: preallocated 256 KiB pool for atomic coherent allocations
187[    0.181809] spmi_pmic_arb 200f000.qcom,spmi: PMIC Arb Version-2 0x20010000
188[    0.190809] msm_watchdog b017000.qcom,wdt: wdog absent resource not present
189[    0.191221] msm_watchdog b017000.qcom,wdt: MSM Watchdog Initialized
190[    0.193704] cma: Assigned CMA region at 0 to 1de0000.qcom,venus device
191[    0.198469] cma: Assigned CMA region at 0 to a21b000.qcom,pronto device
192[    0.198838] cma: Assigned CMA region at 0 to 4080000.qcom,mss device
193[    0.212415] KPI: Bootloader start count = 18893
194[    0.212430] KPI: Bootloader end count = 74512
195[    0.212440] KPI: Bootloader display count = 30033
196[    0.212449] KPI: Bootloader load kernel count = 3563
197[    0.212459] KPI: Kernel MPM timestamp = 171794
198[    0.212469] KPI: Kernel MPM Clock frequency = 32768
199[    0.212499] socinfo_print: v10, id=245, ver=2.0, raw_id=2400, raw_ver=1, hw_plat=8, hw_plat_ver=65536
200[    0.212499]  accessory_chip=0, hw_plat_subtype=0, pmic_model=65549, pmic_die_revision=65537 foundry_id=1 serial_number=270169395
201[    0.214682] smd_channel_probe_worker: allocation table not initialized
202[    0.214705] smd_channel_probe_worker: allocation table not initialized
203[    0.221790] hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers.
204[    0.221806] hw-breakpoint: maximum watchpoint size is 8 bytes.
205[    0.222437] msm_mpm_dev_probe(): Cannot get clk resource for XO
206[    0.222471] platform 601d0.qcom,mpm: Driver mpm-v2 requests probe deferral
207[    0.223034] msm-jtag-fuse 5e01c.jtagfuse: JTag Fuse initialized
208[    0.225149] pm8909_s1_corner: 0 <--> 0 mV at 0 mV normal idle 
209[    0.226019] pm8909_s1_corner_ao: 0 <--> 0 mV at 0 mV normal idle 
210[    0.226856] pm8909_s1_floor_corner: 0 <--> 0 mV at 0 mV normal idle 
211[    0.227665] pm8909_s1_corner_so: 0 <--> 0 mV at 0 mV normal idle 
212[    0.228481] pm8909_s2: 1850 mV normal idle 
213[    0.229301] pm8909_l1: 1000 mV normal idle 
214[    0.230127] pm8909_l2: 1200 mV normal idle 
215[    0.231016] pm8909_l3: 500 <--> 1350 mV at 0 mV normal idle 
216[    0.231794] pm8909_l3_corner_ao: 0 <--> 0 mV at 0 mV normal idle 
217[    0.232534] pm8909_l3_corner_so: 0 <--> 0 mV at 0 mV normal idle 
218[    0.233312] pm8909_l4: 1800 mV normal idle 
219[    0.234174] pm8909_l5: 1800 mV normal idle 
220[    0.235075] pm8909_l6: 1800 mV normal idle 
221[    0.235887] pm8909_l7: 1800 mV normal idle 
222[    0.236650] pm8909_l7_ao: 1800 mV normal idle 
223[    0.237460] pm8909_l7_so: 1800 mV normal idle 
224[    0.238308] pm8909_l8: 2850 <--> 2900 mV at 2850 mV normal idle 
225[    0.239097] pm8909_l9: 3000 <--> 3300 mV at 3000 mV normal idle 
226[    0.239986] pm8909_l10: 1225 <--> 1300 mV at 1225 mV normal idle 
227[    0.240943] pm8909_l11: 1800 <--> 2950 mV at 1800 mV normal idle 
228[    0.241744] pm8909_l12: 1800 <--> 2950 mV at 1800 mV normal idle 
229[    0.242595] pm8909_l13: 3075 mV normal idle 
230[    0.243416] pm8909_l14: 1800 <--> 3000 mV at 1800 mV normal idle 
231[    0.244329] pm8909_l15: 1800 <--> 3000 mV at 1800 mV normal idle 
232[    0.245098] pm8909_l17: 2800 <--> 2850 mV at 2800 mV normal idle 
233[    0.245954] pm8909_l18: 2700 mV normal idle 
234[    0.247888] i2c-msm-v2 78b6000.i2c: probing driver i2c-msm-v2
235[    0.247988] i2c-msm-v2 78b6000.i2c: error on clk_get(core_clk):-517
236[    0.248008] i2c-msm-v2 78b6000.i2c: error probe() failed with err:-517
237[    0.248049] platform 78b6000.i2c: Driver i2c-msm-v2 requests probe deferral
238[    0.248320] i2c-msm-v2 78b8000.i2c: probing driver i2c-msm-v2
239[    0.248396] i2c-msm-v2 78b8000.i2c: error on clk_get(core_clk):-517
240[    0.248413] i2c-msm-v2 78b8000.i2c: error probe() failed with err:-517
241[    0.248445] platform 78b8000.i2c: Driver i2c-msm-v2 requests probe deferral
242[    0.248698] i2c-msm-v2 78b9000.i2c: probing driver i2c-msm-v2
243[    0.248767] i2c-msm-v2 78b9000.i2c: error on clk_get(core_clk):-517
244[    0.248784] i2c-msm-v2 78b9000.i2c: error probe() failed with err:-517
245[    0.248814] platform 78b9000.i2c: Driver i2c-msm-v2 requests probe deferral
246[    0.249062] i2c-msm-v2 78b7000.i2c: probing driver i2c-msm-v2
247[    0.249132] i2c-msm-v2 78b7000.i2c: error on clk_get(core_clk):-517
248[    0.249149] i2c-msm-v2 78b7000.i2c: error probe() failed with err:-517
249[    0.249180] platform 78b7000.i2c: Driver i2c-msm-v2 requests probe deferral
250[    0.249429] i2c-msm-v2 78b5000.i2c: probing driver i2c-msm-v2
251[    0.249500] i2c-msm-v2 78b5000.i2c: error on clk_get(core_clk):-517
252[    0.249517] i2c-msm-v2 78b5000.i2c: error probe() failed with err:-517
253[    0.249546] platform 78b5000.i2c: Driver i2c-msm-v2 requests probe deferral
254[    0.254861] sps:sps is ready.
255[    0.267019] qcom,rpmcc-8909 1800000.qcom,rpmcc: Registered RPM clocks.
256[    0.287305] qcom,gcc-8909 1800000.qcom,gcc: Registered GCC clocks
257[    0.288546] clock-a7 b011050.qcom,clock-a7: Speed bin: 2 PVS Version: 0
258[    0.290871] i2c-msm-v2 78b6000.i2c: probing driver i2c-msm-v2
259[    0.291083] AXI: msm_bus_scale_register_client(): msm_bus_scale_register_client: Bus driver not ready.
260[    0.291102] i2c-msm-v2 78b6000.i2c: msm_bus_scale_register_client(mstr-id:86):0 (not a problem)
261[    0.291725] i2c i2c-2: of_i2c: modalias failure on /soc/i2c@78b6000/nq@28
262[    0.292063] i2c-msm-v2 78b8000.i2c: probing driver i2c-msm-v2
263[    0.292159] AXI: msm_bus_scale_register_client(): msm_bus_scale_register_client: Bus driver not ready.
264[    0.292175] i2c-msm-v2 78b8000.i2c: msm_bus_scale_register_client(mstr-id:86):0 (not a problem)
265[    0.292952] i2c-msm-v2 78b9000.i2c: probing driver i2c-msm-v2
266[    0.293042] AXI: msm_bus_scale_register_client(): msm_bus_scale_register_client: Bus driver not ready.
267[    0.293058] i2c-msm-v2 78b9000.i2c: msm_bus_scale_register_client(mstr-id:86):0 (not a problem)
268[    0.294479] kworker/u8:2 (51) used greatest stack depth: 6892 bytes left
269[    0.294634] kworker/u8:2 (50) used greatest stack depth: 6676 bytes left
270[    0.295919] i2c-msm-v2 78b7000.i2c: probing driver i2c-msm-v2
271[    0.296024] AXI: msm_bus_scale_register_client(): msm_bus_scale_register_client: Bus driver not ready.
272[    0.296041] i2c-msm-v2 78b7000.i2c: msm_bus_scale_register_client(mstr-id:86):0 (not a problem)
273[    0.299516] i2c-msm-v2 78b5000.i2c: probing driver i2c-msm-v2
274[    0.299717] AXI: msm_bus_scale_register_client(): msm_bus_scale_register_client: Bus driver not ready.
275[    0.299735] i2c-msm-v2 78b5000.i2c: msm_bus_scale_register_client(mstr-id:86):0 (not a problem)
276[    0.351816] bio: create slab <bio-0> at 0
277[    0.354260] spk_vreg: no parameters
278[    0.355137] oem_otg_ext_vreg: no parameters
279[    0.356928] SCSI subsystem initialized
280[    0.357783] usbcore: registered new interface driver usbfs
281[    0.357940] usbcore: registered new interface driver hub
282[    0.358207] usbcore: registered new device driver usb
283[    0.358387] media: Linux media interface: v0.10
284[    0.358462] Linux video capture interface: v2.00
285[    0.358768] BATTERY: batterydata_init: Battery-data device created!
286[    0.360423] cma: Assigned CMA region at 0 to 1b.qcom,ion-heap device
287[    0.360682] cma: Assigned CMA region at 0 to 1c.qcom,ion-heap device
288[    0.361049] cma: Assigned CMA region at 0 to 1a.qcom,ion-heap device
289[    0.361405] ION heap system created
290[    0.361647] ION heap qsecom created at 0x8f800000 with size 600000
291[    0.361676] ION heap audio created at 0xff800000 with size 314000
292[    0.361700] ION heap pil_2 created at 0x88000000 with size 5500000
293[    0.362195] msm_bus_fabric_init_driver
294[    0.362481] msm_bus_device 580000.ad-hoc-bus: Dev 0
295[    0.362505] msm_bus_device 580000.ad-hoc-bus: Vrail-comp is missing, default to 100
296[    0.362681] msm_bus_device 580000.ad-hoc-bus: msmbus_coresight initialized
297[    0.362720] msm_bus_device 580000.ad-hoc-bus: Dev 4096
298[    0.362739] msm_bus_device 580000.ad-hoc-bus: Util-fact is missing, default to 100
299[    0.362751] msm_bus_device 580000.ad-hoc-bus: Vrail-comp is missing, default to 100
300[    0.362951] msm_bus_device 580000.ad-hoc-bus: msmbus_coresight initialized
301[    0.363008] msm_bus_device 580000.ad-hoc-bus: Dev 1024
302[    0.363027] msm_bus_device 580000.ad-hoc-bus: Util-fact is missing, default to 100
303[    0.363039] msm_bus_device 580000.ad-hoc-bus: Vrail-comp is missing, default to 100
304[    0.363200] msm_bus_device 580000.ad-hoc-bus: msmbus_coresight initialized
305[    0.363234] msm_bus_device 580000.ad-hoc-bus: Dev 2048
306[    0.363254] msm_bus_device 580000.ad-hoc-bus: Vrail-comp is missing, default to 100
307[    0.363289] msm_bus_device 580000.ad-hoc-bus: Coresight support absent for bus: 2048
308[    0.366138] msm_bus_init_clk: Valid node clk node 0 ctx 0
309[    0.366147] msm_bus_init_clk: Valid node clk node 0 ctx 1msm_bus_init_clk: Valid node clk node 4096 ctx 0
310[    0.366284] msm_bus_init_clk: Valid node clk node 4096 ctx 1msm_bus_init_clk: Valid node clk node 1024 ctx 0
311[    0.366410] msm_bus_init_clk: Valid node clk node 1024 ctx 1msm_bus_init_clk: Valid Iface clk node 1024
312[    0.366530] msm_bus_init_clk: Valid node clk node 2048 ctx 0msm_bus_init_clk: Valid node clk node 2048 ctx 1
313[    0.381208] gdsc_venus: no parameters
314[    0.381655] gdsc_mdss: no parameters
315[    0.382127] gdsc_vfe: no parameters
316[    0.382600] gdsc_oxili_gx: no parameters
317[    0.382954] gdsc_venus_core0: fast normal 
318[    0.383975] mdss_pll_probe: MDSS pll label = MDSS DSI 0 PLL
319[    0.385209] dsi_pll_clock_register_lpm: Registered DSI PLL clocks successfully
320[    0.386251] msm_iommu 1f00000.qcom,iommu: device gfx_iommu (model: 500) mapped at f0320000, with 2 ctx banks
321[    0.387156] msm_iommu 1e00000.qcom,iommu: device apps_iommu (model: 500) mapped at f0380000, with 22 ctx banks
322[    0.394187] msm_iommu_ctx 1f09000.qcom,iommu-ctx: context gfx3d_user using bank 1
323[    0.394385] msm_iommu_ctx 1f0a000.qcom,iommu-ctx: context gfx3d_priv using bank 2
324[    0.394597] msm_iommu_ctx 1e22000.qcom,iommu-ctx: context MSA0_Audio using bank 2
325[    0.394782] msm_iommu_ctx 1e23000.qcom,iommu-ctx: context vfe using bank 3
326[    0.394966] msm_iommu_ctx 1e24000.qcom,iommu-ctx: context mdp_0 using bank 4
327[    0.395152] msm_iommu_ctx 1e25000.qcom,iommu-ctx: context venus_ns using bank 5
328[    0.395338] msm_iommu_ctx 1e27000.qcom,iommu-ctx: context mDSP using bank 7
329[    0.395552] msm_iommu_ctx 1e28000.qcom,iommu-ctx: context gss using bank 8
330[    0.395741] msm_iommu_ctx 1e29000.qcom,iommu-ctx: context a2 using bank 9
331[    0.395993] msm_iommu_ctx 1e32000.qcom,iommu-ctx: context mdp_1 using bank 18
332[    0.396259] msm_iommu_ctx 1e33000.qcom,iommu-ctx: context venus_sec_pixel using bank 19
333[    0.396447] msm_iommu_ctx 1e34000.qcom,iommu-ctx: context venus_sec_bitstream using bank 20
334[    0.396634] msm_iommu_ctx 1e35000.qcom,iommu-ctx: context venus_sec_non_pixel using bank 21
335[    0.396894] msm_iommu_ctx 1e36000.qcom,iommu-ctx: context venus_fw using bank 22
336[    0.397086] msm_iommu_ctx 1e37000.qcom,iommu-ctx: context periph_rpm using bank 23
337[    0.397337] msm_iommu_ctx 1e38000.qcom,iommu-ctx: context periph_CE using bank 24
338[    0.397528] msm_iommu_ctx 1e39000.qcom,iommu-ctx: context periph_BLSP using bank 25
339[    0.397711] msm_iommu_ctx 1e3a000.qcom,iommu-ctx: context periph_SDC1 using bank 26
340[    0.397919] msm_iommu_ctx 1e3b000.qcom,iommu-ctx: context periph_SDC2 using bank 27
341[    0.398105] msm_iommu_ctx 1e3c000.qcom,iommu-ctx: context periph_audio using bank 28
342[    0.398289] msm_iommu_ctx 1e3d000.qcom,iommu-ctx: context periph_USB_HS1 using bank 29
343[    0.398472] msm_iommu_ctx 1e2a000.qcom,iommu-ctx: context qpic using bank 10
344[    0.398654] msm_iommu_ctx 1e31000.qcom,iommu-ctx: context wlan using bank 17
345[    0.398868] msm_iommu_ctx 1e3f000.qcom,iommu-ctx: context periph_CE_secure using bank 31
346[    0.400562] Advanced Linux Sound Architecture Driver Initialized.
347[    0.401512] Bluetooth: ee855f10
348[    0.401575] NET: Registered protocol family 31
349[    0.401585] Bluetooth: ee855f10
350[    0.401602] Bluetooth: ee855f08Bluetooth: ee855ef8
351[    0.401725] Bluetooth: ee855f00[    0.402193] cfg80211: Calling CRDA to update world regulatory domain
352[    0.402232] cfg80211: World regulatory domain updated:
353[    0.402240] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
354[    0.402250] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
355[    0.402259] cfg80211:   (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
356[    0.402268] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
357[    0.402277] cfg80211:   (5170000 KHz - 5250000 KHz @ 80000 KHz), (300 mBi, 2000 mBm)
358[    0.402286] cfg80211:   (5250000 KHz - 5330000 KHz @ 80000 KHz), (300 mBi, 2000 mBm)
359[    0.402295] cfg80211:   (5490000 KHz - 5710000 KHz @ 80000 KHz), (300 mBi, 2000 mBm)
360[    0.402304] cfg80211:   (5735000 KHz - 5835000 KHz @ 80000 KHz), (300 mBi, 2000 mBm)
361[    0.402313] cfg80211:   (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm)
362[    0.403357] Switching to clocksource arch_sys_counter
363[    0.468524] NET: Registered protocol family 2
364[    0.469490] TCP established hash table entries: 8192 (order: 4, 65536 bytes)
365[    0.470071] TCP bind hash table entries: 8192 (order: 5, 163840 bytes)
366[    0.470245] TCP: Hash tables configured (established 8192 bind 8192)
367[    0.470435] TCP: reno registered
368[    0.470524] UDP hash table entries: 512 (order: 2, 24576 bytes)
369[    0.470626] UDP-Lite hash table entries: 512 (order: 2, 24576 bytes)
370[    0.471067] NET: Registered protocol family 1
371[    0.472122] gcc-mdss-8909 qcom,gcc-mdss.31: Registered GCC MDSS clocks.
372[    0.472872] Trying to unpack rootfs image as initramfs...
373[    0.565631] Freeing initrd memory: 1316K (c2000000 - c2149000)
374[    0.568612] hw perfevents: enabled with ARMv7 Cortex-A7 PMU driver, 5 counters available
375[    0.572979] Initialise module verification
376[    0.573056] audit: initializing netlink socket (disabled)
377[    0.573245] type=2000 audit(0.559:1): initialized
378[    0.794285] bounce pool size: 64 pages
379[    0.805439] fuse init (API version 7.23)
380[    0.810975] Key type asymmetric registered
381[    0.810989] Asymmetric key parser 'x509' registered
382[    0.811306] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 249)
383[    0.811318] io scheduler noop registered
384[    0.811326] io scheduler deadline registered
385[    0.811360] io scheduler row registered
386[    0.811585] io scheduler cfq registered (default)
387[    0.815816] platform qcom,smp2pgpio-ssr-smp2p-4-in.14: Driver smp2pgpio requests probe deferral
388[    0.816076] platform qcom,smp2pgpio-ssr-smp2p-4-out.15: Driver smp2pgpio requests probe deferral
389[    0.816332] platform qcom,smp2pgpio-ssr-smp2p-1-in.16: Driver smp2pgpio requests probe deferral
390[    0.816587] platform qcom,smp2pgpio-ssr-smp2p-1-out.17: Driver smp2pgpio requests probe deferral
391[    0.820225] mdss_dsi_ctrl_probe: DSI Ctrl name = MDSS DSI CTRL->0
392[    0.820580] mdss_dsi_panel_init: Panel Name = ili9881c 720p video mode dsi panel
393[    0.820999] mdss_dsi_parse_dcs_cmds: failed, key=qcom,mdss-dsi-post-panel-on-command
394[    0.821023] mdss_dsi_parse_dcs_cmds: failed, key=qcom,mdss-dsi-panel-status-command
395[    0.821065] mdss_dsi_parse_panel_features: ulps feature disabled
396[    0.821080] mdss_dsi_parse_panel_features: ulps during suspend feature disabled
397[    0.821091] mdss_dsi_parse_panel_features: dynamic switch feature enabled: 0
398[    0.821117] mdss_dsi_parse_panel_features:1215, Disp_en gpio not specified
399[    0.821138] mdss_dsi_panel_init: Continuous splash enabled
400[    0.821677] dsi_panel_device_register:1884, TE gpio not specified
401[    0.821696] dsi_panel_device_register: bklt_en gpio not specified
402[    0.821842] mdss_dsi_pll_1_clk_init: can't find vco_clk. rc=-517
403[    0.821849] PLL 1 Clock's did not register
404[    0.821877] mdss_dsi_retrieve_ctrl_resources: ctrl_base=f00fc000 ctrl_size=25c phy_base=f00fe500 phy_size=2b0
405[    0.821891] dsi_panel_device_register: Using default BTA for ESD check
406[    0.834413] mdss_register_panel: adding framebuffer device 1ac8000.qcom,mdss_dsi
407[    0.836691] mdss_dsi_status_init: DSI status check interval:5000
408[    0.838241] mdp3_alloc: allocating 12582912 bytes at c3000000 (83000000 phys) for fb 0
409[    0.838711] mdss_fb_register: FrameBuffer[0] 720x1280 registered successfully!
410[    0.838721] mdp3_ctrl_init: mdp3_ctrl_init
411[    0.838833] mdp3 1a00000.qcom,mdss_mdp: Unbalanced pm_runtime_enable!
412[    0.841794] IPC_RTR: msm_ipc_router_smd_driver_register Already driver registered IPCRTR
413[    0.844361] msm_rpm_log_probe: OK
414[    0.848617] NET: Registered protocol family 27
415[    0.853924] In memshare_probe, Memshare probe success
416[    0.856442] subsys-pil-tz a21b000.qcom,pronto: [wcnss]: Error getting proxy unvoting gpio
417[    0.856469] platform a21b000.qcom,pronto: Driver subsys-pil-tz requests probe deferral
418[    0.858395] pil-q6v5-mss 4080000.qcom,mss: [modem]: Error getting proxy unvoting gpio
419[    0.858605] platform 4080000.qcom,mss: Driver pil-q6v5-mss requests probe deferral
420[    0.859962] msm_serial_hsl_probe: detected port #0 (ttyHSL0)
421[    0.860006] AXI: get_pdata(): Error: Client name not found
422[    0.860014] AXI: msm_bus_cl_get_pdata(): client has to provide missing entry for successful registration
423[    0.860021] msm_serial_hsl_probe: Bus scaling is disabled
424[    0.860127] 78af000.serial: ttyHSL0 at MMIO 0x78af000 (irq = 139) is a MSM
425[    0.860188] msm_hsl_console_setup: console setup on port #0
426[    3.035278] console [ttyHSL0] enabled
427[    3.039255] msm_serial_hsl_probe: detected port #1 (ttyHSL1)
428[    3.044579] AXI: get_pdata(): Error: Client name not found
429[    3.049965] AXI: msm_bus_cl_get_pdata(): client has to provide missing entry for successful registration
430[    3.059463] msm_serial_hsl_probe: Bus scaling is disabled
431[    3.064949] 78b0000.serial: ttyHSL1 at MMIO 0x78b0000 (irq = 140) is a MSM
432[    3.072195] msm_serial_hsl_init: driver initialized
433[    3.090632] kgsl kgsl-3d0: Initialized kgsl-3d0: mmu=on
434[    3.108745] brd: module loaded
435[    3.115172] loop: module loaded
436[    3.118106] apds993x 1-0039: Unable to read cross_talk use default 100
437[    3.263899] i2c-msm-v2 78b5000.i2c: msm_bus_scale_register_client(mstr-id:86):0x5 (ok)
438[    3.271559] i2c-msm-v2 78b5000.i2c: NACK: slave not responding, ensure its powered: msgs(n:2 cur:0 tx) bc(rx:1 tx:1) mode:FIFO slv_addr:0x39 MSTR_STS:0x011363c8 OPER:0x00000010
439[    3.286555] apds993x 1-0039: Neither APDS993x nor APDS990x
440[    3.291955] apds993x 1-0039: Not a valid chip ID
441[    3.297419] QSEECOM: qseecom_probe: qseecom.qsee_version = 0x405000
442[    3.302845] QSEECOM: qseecom_probe: disk-encrypt-pipe-pair=0x2
443[    3.308555] QSEECOM: qseecom_probe: Device does not support PFEQSEECOM: qseecom_probe: qsee-ce-hw-instance=0x0
444[    3.318431] QSEECOM: qseecom_probe: qseecom.appsbl_qseecom_support = 0x0[    3.325147] QSEECOM: qseecom_probe: qseecom clocks handled by other subsystem
445[    3.332352] QSEECOM: qseecom_probe: secure app region addr=0x87a00000 size=0x200000
446[    3.342265] i2c-core: driver [tabla-i2c-core] using legacy suspend method
447[    3.348236] i2c-core: driver [tabla-i2c-core] using legacy resume method
448[    3.355055] i2c-core: driver [wcd9xxx-i2c-core] using legacy suspend method
449[    3.361810] i2c-core: driver [wcd9xxx-i2c-core] using legacy resume method
450[    3.368933] i2c-core: driver [tasha-i2c-core] using legacy suspend method
451[    3.375526] i2c-core: driver [tasha-i2c-core] using legacy resume method
452[    3.383137] SCSI Media Changer driver v0.25 
453[    3.390101] tun: Universal TUN/TAP device driver, 1.6
454[    3.394223] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
455[    3.403284] PPP generic driver version 2.4.2
456[    3.406732] PPP BSD Compression module registered
457[    3.411200] PPP Deflate Compression module registered
458[    3.416290] PPP MPPE Compression module registered
459[    3.421010] NET: Registered protocol family 24
460[    3.426583] wcnss_wlan probed in built-in mode
461[    3.434068] usbcore: registered new interface driver asix
462[    3.438507] usbcore: registered new interface driver ax88179_178a
463[    3.444626] usbcore: registered new interface driver cdc_ether
464[    3.450369] usbcore: registered new interface driver net1080
465[    3.456060] usbcore: registered new interface driver cdc_subset
466[    3.461914] usbcore: registered new interface driver zaurus
467[    3.467852] usbcore: registered new interface driver cdc_ncm
468[    3.473805] msm_sharedmem: sharedmem_register_qmi: qmi init successful
469[    3.480148] msm_sharedmem: msm_sharedmem_probe: Device created for client 'rmtfs'
470[    3.487311] msm_sharedmem: msm_sharedmem_probe: Device created for client 'rfsa_dsp'
471[    3.494987] msm_sharedmem: msm_sharedmem_probe: Device created for client 'rfsa_mdm'
472[    3.503082] msm_otg 78d9000.usb: msm_otg probe
473[    3.511001] msm_otg 78d9000.usb: OTG regs = f01f4000
474[    3.517851] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
475[    3.523339] ehci-msm: Qualcomm On-Chip EHCI Host Controller
476[    3.529615] ehci-msm2: Qualcomm EHCI Host Controller
477[    3.534492] usbcore: registered new interface driver cdc_acm
478[    3.539482] cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters
479[    3.547600] usbcore: registered new interface driver ccid_bridge
480[    3.553690] ccid_bridge_init: success
481[    3.557178] usbcore: registered new interface driver usb-storage
482[    3.563137] usbcore: registered new interface driver ums-alauda
483[    3.569087] usbcore: registered new interface driver ums-cypress
484[    3.575067] usbcore: registered new interface driver ums-datafab
485[    3.581018] usbcore: registered new interface driver ums-freecom
486[    3.587049] usbcore: registered new interface driver ums-isd200
487[    3.592910] usbcore: registered new interface driver ums-jumpshot
488[    3.599054] usbcore: registered new interface driver ums-karma
489[    3.604845] usbcore: registered new interface driver ums-onetouch
490[    3.610878] usbcore: registered new interface driver ums-sddr09
491[    3.616822] usbcore: registered new interface driver ums-sddr55
492[    3.622683] usbcore: registered new interface driver ums-usbat
493[    3.628667] usbcore: registered new interface driver usbserial
494[    3.634389] usbcore: registered new interface driver qc_csvt
495[    3.639957] usbserial: USB Serial support registered for qc_csvt
496[    3.646028] usbcore: registered new interface driver usb_ehset_test
497[    3.654463] msm_otg 78d9000.usb: phy_reset: success
498[    3.655089] mousedev: PS/2 mouse device common for all mice
499[    3.655300] usbcore: registered new interface driver xpad
500[    3.657035] Goodix-TS 5-005d: Regulator get failed avdd ret=-19
501[    3.657047] Goodix-TS 5-005d: Regulator get failed vdd ret=-19
502[    3.657803] Goodix-TS 5-005d: Can not lookup pmx_ts_release pinstate -19
503[    3.773952] i2c-msm-v2 78b9000.i2c: msm_bus_scale_register_client(mstr-id:86):0x8 (ok)
504[    3.781286] i2c-msm-v2 78b9000.i2c: NACK: slave not responding, ensure its powered: msgs(n:1 cur:0 tx) bc(rx:0 tx:4) mode:FIFO slv_addr:0x5d MSTR_STS:0x011363c8 OPER:0x00000090
505[    3.796965] i2c-msm-v2 78b9000.i2c: NACK: slave not responding, ensure its powered: msgs(n:1 cur:0 tx) bc(rx:0 tx:4) mode:FIFO slv_addr:0x5d MSTR_STS:0x011363c8 OPER:0x00000090
506[    3.812454] i2c-msm-v2 78b9000.i2c: NACK: slave not responding, ensure its powered: msgs(n:1 cur:0 tx) bc(rx:0 tx:4) mode:FIFO slv_addr:0x5d MSTR_STS:0x011363c8 OPER:0x00000090
507[    3.828163] i2c-msm-v2 78b9000.i2c: NACK: slave not responding, ensure its powered: msgs(n:1 cur:0 tx) bc(rx:0 tx:4) mode:FIFO slv_addr:0x5d MSTR_STS:0x011363c8 OPER:0x00000090
508[    3.843930] i2c-msm-v2 78b9000.i2c: NACK: slave not responding, ensure its powered: msgs(n:1 cur:0 tx) bc(rx:0 tx:4) mode:FIFO slv_addr:0x5d MSTR_STS:0x011363c8 OPER:0x00000090
509[    3.859435] Goodix-TS 5-005d: init external watchdog failed!
510[    3.865225] i2c-msm-v2 78b9000.i2c: NACK: slave not responding, ensure its powered: msgs(n:2 cur:0 tx) bc(rx:1 tx:2) mode:FIFO slv_addr:0x5d MSTR_STS:0x011363c8 OPER:0x00000010
511[    3.880791] Goodix-TS 5-005d: I2C retry: 1
512[    3.885012] i2c-msm-v2 78b9000.i2c: NACK: slave not responding, ensure its powered: msgs(n:2 cur:0 tx) bc(rx:1 tx:2) mode:FIFO slv_addr:0x5d MSTR_STS:0x011363c8 OPER:0x00000010
513[    3.900580] Goodix-TS 5-005d: I2C retry: 2
514[    3.904803] i2c-msm-v2 78b9000.i2c: NACK: slave not responding, ensure its powered: msgs(n:2 cur:0 tx) bc(rx:1 tx:2) mode:FIFO slv_addr:0x5d MSTR_STS:0x011363c8 OPER:0x00000010
515[    3.920372] Goodix-TS 5-005d: I2C retry: 3
516[    3.924594] i2c-msm-v2 78b9000.i2c: NACK: slave not responding, ensure its powered: msgs(n:2 cur:0 tx) bc(rx:1 tx:2) mode:FIFO slv_addr:0x5d MSTR_STS:0x011363c8 OPER:0x00000010
517[    3.940164] Goodix-TS 5-005d: I2C retry: 4
518[    3.944386] i2c-msm-v2 78b9000.i2c: NACK: slave not responding, ensure its powered: msgs(n:2 cur:0 tx) bc(rx:1 tx:2) mode:FIFO slv_addr:0x5d MSTR_STS:0x011363c8 OPER:0x00000010
519[    3.959956] Goodix-TS 5-005d: I2C retry: 5
520[    3.964024] Goodix-TS 5-005d: gtp_reset_guitar exit init_done=0:
521[    3.969979] Goodix-TS 5-005d: GTP i2c test failed time 4.
522[    4.003624] i2c-msm-v2 78b9000.i2c: NACK: slave not responding, ensure its powered: msgs(n:2 cur:0 tx) bc(rx:1 tx:2) mode:FIFO slv_addr:0x5d MSTR_STS:0x011363c8 OPER:0x00000010
523[    4.018361] Goodix-TS 5-005d: I2C retry: 1
524[    4.022547] i2c-msm-v2 78b9000.i2c: NACK: slave not responding, ensure its powered: msgs(n:2 cur:0 tx) bc(rx:1 tx:2) mode:FIFO slv_addr:0x5d MSTR_STS:0x011363c8 OPER:0x00000010
525[    4.038187] Goodix-TS 5-005d: I2C retry: 2
526[    4.042338] i2c-msm-v2 78b9000.i2c: NACK: slave not responding, ensure its powered: msgs(n:2 cur:0 tx) bc(rx:1 tx:2) mode:FIFO slv_addr:0x5d MSTR_STS:0x011363c8 OPER:0x00000010
527[    4.057942] Goodix-TS 5-005d: I2C retry: 3
528[    4.062130] i2c-msm-v2 78b9000.i2c: NACK: slave not responding, ensure its powered: msgs(n:2 cur:0 tx) bc(rx:1 tx:2) mode:FIFO slv_addr:0x5d MSTR_STS:0x011363c8 OPER:0x00000010
529[    4.077735] Goodix-TS 5-005d: I2C retry: 4
530[    4.081922] i2c-msm-v2 78b9000.i2c: NACK: slave not responding, ensure its powered: msgs(n:2 cur:0 tx) bc(rx:1 tx:2) mode:FIFO slv_addr:0x5d MSTR_STS:0x011363c8 OPER:0x00000010
531[    4.097526] Goodix-TS 5-005d: I2C retry: 5
532[    4.101560] Goodix-TS 5-005d: gtp_reset_guitar exit init_done=0:
533[    4.107620] Goodix-TS 5-005d: GTP i2c test failed time 3.
534[    4.133623] i2c-msm-v2 78b9000.i2c: NACK: slave not responding, ensure its powered: msgs(n:2 cur:0 tx) bc(rx:1 tx:2) mode:FIFO slv_addr:0x5d MSTR_STS:0x011363c8 OPER:0x00000010
535[    4.148355] Goodix-TS 5-005d: I2C retry: 1
536[    4.152543] i2c-msm-v2 78b9000.i2c: NACK: slave not responding, ensure its powered: msgs(n:2 cur:0 tx) bc(rx:1 tx:2) mode:FIFO slv_addr:0x5d MSTR_STS:0x011363c8 OPER:0x00000010
537[    4.168149] Goodix-TS 5-005d: I2C retry: 2
538[    4.172336] i2c-msm-v2 78b9000.i2c: NACK: slave not responding, ensure its powered: msgs(n:2 cur:0 tx) bc(rx:1 tx:2) mode:FIFO slv_addr:0x5d MSTR_STS:0x011363c8 OPER:0x00000010
539[    4.187940] Goodix-TS 5-005d: I2C retry: 3
540[    4.192127] i2c-msm-v2 78b9000.i2c: NACK: slave not responding, ensure its powered: msgs(n:2 cur:0 tx) bc(rx:1 tx:2) mode:FIFO slv_addr:0x5d MSTR_STS:0x011363c8 OPER:0x00000010
541[    4.207731] Goodix-TS 5-005d: I2C retry: 4
542[    4.211918] i2c-msm-v2 78b9000.i2c: NACK: slave not responding, ensure its powered: msgs(n:2 cur:0 tx) bc(rx:1 tx:2) mode:FIFO slv_addr:0x5d MSTR_STS:0x011363c8 OPER:0x00000010
543[    4.227524] Goodix-TS 5-005d: I2C retry: 5
544[    4.231557] Goodix-TS 5-005d: gtp_reset_guitar exit init_done=0:
545[    4.237584] Goodix-TS 5-005d: GTP i2c test failed time 2.
546[    4.263620] i2c-msm-v2 78b9000.i2c: NACK: slave not responding, ensure its powered: msgs(n:2 cur:0 tx) bc(rx:1 tx:2) mode:FIFO slv_addr:0x5d MSTR_STS:0x011363c8 OPER:0x00000010
547[    4.278354] Goodix-TS 5-005d: I2C retry: 1
548[    4.282543] i2c-msm-v2 78b9000.i2c: NACK: slave not responding, ensure its powered: msgs(n:2 cur:0 tx) bc(rx:1 tx:2) mode:FIFO slv_addr:0x5d MSTR_STS:0x011363c8 OPER:0x00000010
549[    4.298151] Goodix-TS 5-005d: I2C retry: 2
550[    4.302333] i2c-msm-v2 78b9000.i2c: NACK: slave not responding, ensure its powered: msgs(n:2 cur:0 tx) bc(rx:1 tx:2) mode:FIFO slv_addr:0x5d MSTR_STS:0x011363c8 OPER:0x00000010
551[    4.317937] Goodix-TS 5-005d: I2C retry: 3
552[    4.322125] i2c-msm-v2 78b9000.i2c: NACK: slave not responding, ensure its powered: msgs(n:2 cur:0 tx) bc(rx:1 tx:2) mode:FIFO slv_addr:0x5d MSTR_STS:0x011363c8 OPER:0x00000010
553[    4.337728] Goodix-TS 5-005d: I2C retry: 4
554[    4.341917] i2c-msm-v2 78b9000.i2c: NACK: slave not responding, ensure its powered: msgs(n:2 cur:0 tx) bc(rx:1 tx:2) mode:FIFO slv_addr:0x5d MSTR_STS:0x011363c8 OPER:0x00000010
555[    4.357521] Goodix-TS 5-005d: I2C retry: 5
556[    4.361555] Goodix-TS 5-005d: gtp_reset_guitar exit init_done=0:
557[    4.367581] Goodix-TS 5-005d: GTP i2c test failed time 1.
558[    4.393620] i2c-msm-v2 78b9000.i2c: NACK: slave not responding, ensure its powered: msgs(n:2 cur:0 tx) bc(rx:1 tx:2) mode:FIFO slv_addr:0x5d MSTR_STS:0x011363c8 OPER:0x00000010
559[    4.408354] Goodix-TS 5-005d: I2C retry: 1
560[    4.412541] i2c-msm-v2 78b9000.i2c: NACK: slave not responding, ensure its powered: msgs(n:2 cur:0 tx) bc(rx:1 tx:2) mode:FIFO slv_addr:0x5d MSTR_STS:0x011363c8 OPER:0x00000010
561[    4.428145] Goodix-TS 5-005d: I2C retry: 2
562[    4.432333] i2c-msm-v2 78b9000.i2c: NACK: slave not responding, ensure its powered: msgs(n:2 cur:0 tx) bc(rx:1 tx:2) mode:FIFO slv_addr:0x5d MSTR_STS:0x011363c8 OPER:0x00000010
563[    4.447937] Goodix-TS 5-005d: I2C retry: 3
564[    4.452125] i2c-msm-v2 78b9000.i2c: NACK: slave not responding, ensure its powered: msgs(n:2 cur:0 tx) bc(rx:1 tx:2) mode:FIFO slv_addr:0x5d MSTR_STS:0x011363c8 OPER:0x00000010
565[    4.467730] Goodix-TS 5-005d: I2C retry: 4
566[    4.471918] i2c-msm-v2 78b9000.i2c: NACK: slave not responding, ensure its powered: msgs(n:2 cur:0 tx) bc(rx:1 tx:2) mode:FIFO slv_addr:0x5d MSTR_STS:0x011363c8 OPER:0x00000010
567[    4.487522] Goodix-TS 5-005d: I2C retry: 5
568[    4.491555] Goodix-TS 5-005d: gtp_reset_guitar exit init_done=0:
569[    4.497577] Goodix-TS 5-005d: GTP i2c test failed time 0.
570[    4.523466] Goodix-TS 5-005d: I2C communication ERROR!
571[    4.527723] Goodix-TS: probe of 5-005d failed with error -107
572[    4.533922] <<GTP-INF>>[gt1x_ts_probe:626] GTP Driver Version: V1.4<2015/07/10>
573[    4.540583] <<GTP-INF>>[gt1x_ts_probe:627] GTP I2C Address: 0x14
574[    4.546688] <<GTP-ERR>>[gt1x_parse_dt:331] regulator get of vdd_ana failed
575[    4.553934] Goodix-TP 5-0014: Can not lookup pmx_ts_release pinstate -19
576[    4.560137] <<GTP-INF>>[gt1x_reset_guitar:815] GTP RESET!
577[    4.683636] i2c-msm-v2 78b9000.i2c: NACK: slave not responding, ensure its powered: msgs(n:1 cur:0 tx) bc(rx:0 tx:5) mode:FIFO slv_addr:0x14 MSTR_STS:0x011363c8 OPER:0x00000090
578[    4.698372] <<GTP-ERR>>[_do_i2c_write:433] I2c transfer error! (-107)
579[    4.704784] <<GTP-ERR>>[gt1x_init:2353] Reset guitar failed!
580[    4.710388] <<GTP-INF>>[gt1x_reset_guitar:815] GTP RESET!
581[    4.833623] i2c-msm-v2 78b9000.i2c: NACK: slave not responding, ensure its powered: msgs(n:1 cur:0 tx) bc(rx:0 tx:5) mode:FIFO slv_addr:0x14 MSTR_STS:0x011363c8 OPER:0x00000090
582[    4.848355] <<GTP-ERR>>[_do_i2c_write:433] I2c transfer error! (-107)
583[    4.854769] <<GTP-ERR>>[gt1x_init:2353] Reset guitar failed!
584[    4.860375] <<GTP-INF>>[gt1x_reset_guitar:815] GTP RESET!
585[    4.983620] i2c-msm-v2 78b9000.i2c: NACK: slave not responding, ensure its powered: msgs(n:1 cur:0 tx) bc(rx:0 tx:5) mode:FIFO slv_addr:0x14 MSTR_STS:0x011363c8 OPER:0x00000090
586[    4.998347] <<GTP-ERR>>[_do_i2c_write:433] I2c transfer error! (-107)
587[    5.004769] <<GTP-ERR>>[gt1x_init:2353] Reset guitar failed!
588[    5.010372] <<GTP-INF>>[gt1x_reset_guitar:815] GTP RESET!
589[    5.133627] i2c-msm-v2 78b9000.i2c: NACK: slave not responding, ensure its powered: msgs(n:1 cur:0 tx) bc(rx:0 tx:5) mode:FIFO slv_addr:0x14 MSTR_STS:0x011363c8 OPER:0x00000090
590[    5.148360] <<GTP-ERR>>[_do_i2c_write:433] I2c transfer error! (-107)
591[    5.154775] <<GTP-ERR>>[gt1x_init:2353] Reset guitar failed!
592[    5.160378] <<GTP-INF>>[gt1x_reset_guitar:815] GTP RESET!
593[    5.283624] i2c-msm-v2 78b9000.i2c: NACK: slave not responding, ensure its powered: msgs(n:1 cur:0 tx) bc(rx:0 tx:5) mode:FIFO slv_addr:0x14 MSTR_STS:0x011363c8 OPER:0x00000090
594[    5.298358] <<GTP-ERR>>[_do_i2c_write:433] I2c transfer error! (-107)
595[    5.304769] <<GTP-ERR>>[gt1x_init:2353] Reset guitar failed!
596[    5.310376] <<GTP-ERR>>[gt1x_init:2379] Init failed, use default setting
597[    5.317253] i2c-msm-v2 78b9000.i2c: NACK: slave not responding, ensure its powered: msgs(n:2 cur:0 tx) bc(rx:4 tx:2) mode:FIFO slv_addr:0x14 MSTR_STS:0x011363c8 OPER:0x00000010
598[    5.332817] <<GTP-ERR>>[_do_i2c_read:391] I2c Transfer error! (-107)
599[    5.339145] <<GTP-ERR>>[gt1x_get_chip_type:922] I2c communication error.
600[    5.345826] <<GTP-ERR>>[gt1x_init:2389] Get chip type failed!
601[    5.351532] <<GTP-ERR>>[gt1x_ts_probe:664] gt1x_init() failed.
602[    5.357421] Goodix-TP: probe of 5-0014 failed with error -1
603[    5.384211] i2c-msm-v2 78b5000.i2c: NACK: slave not responding, ensure its powered: msgs(n:2 cur:0 tx) bc(rx:1 tx:1) mode:FIFO slv_addr:0x30 MSTR_STS:0x011363c8 OPER:0x00000010
604[    5.398968] mmc3416x 1-0030: read reg 6 failed.(-107)
605[    5.403973] mmc3416x 1-0030: Check device failed
606[    5.408707] mmc3416x: probe of 1-0030 failed with error -107
607[    5.414368] stk3x1x_probe: driver version = 3.4.4ts
608[    5.419107] stk_ps 1-0048: stk3x1x_probe: stk3x1x_parse_dt ret=0
609[    5.425347] input: stk3x1x-ls as /devices/soc.0/78b5000.i2c/i2c-1/1-0048/input/input0
610[    5.433181] input: proximity as /devices/soc.0/78b5000.i2c/i2c-1/1-0048/input/input1
611[    5.442600] mpu6050 1-0068: Regulator get failed vi2c ret=-19
612[    5.553669] i2c-msm-v2 78b5000.i2c: NACK: slave not responding, ensure its powered: msgs(n:2 cur:0 tx) bc(rx:1 tx:1) mode:FIFO slv_addr:0x68 MSTR_STS:0x011363c8 OPER:0x00000010
613[    5.568425] mpu6050 1-0068: Fail to read power mode, ret=-107
614[    5.574125] mpu6050 1-0068: Cannot get invalid chip type
615[    5.579521] mpu6050 1-0068: Probe device return error-107
616[    5.584861] mpu6050: probe of 1-0068 failed with error -107
617[    5.590374] AKM compass driver: initialize.
618[    5.683639] i2c-msm-v2 78b5000.i2c: NACK: slave not responding, ensure its powered: msgs(n:1 cur:0 tx) bc(rx:0 tx:2) mode:FIFO slv_addr:0xc MSTR_STS:0x011363c8 OPER:0x00000090
619[    5.698305] akm8963 1-000c: akm_i2c_txdata: transfer failed.
620[    5.703952] akm8963 1-000c: AKECS_Set_PowerDown: Can not set to powerdown mode.
621[    5.711346] i2c-msm-v2 78b5000.i2c: NACK: slave not responding, ensure its powered: msgs(n:2 cur:0 tx) bc(rx:2 tx:1) mode:FIFO slv_addr:0xc MSTR_STS:0x011363c8 OPER:0x00000010
622[    5.726858] akm8963 1-000c: akm_i2c_rxdata: transfer failed.
623[    5.732567] akm8963: probe of 1-000c failed with error -107
624[    5.738124] AKM compass driver: initialize.
625[    5.742231] i2c-core: driver [bma2x2-accel] using legacy suspend method
626[    5.748799] i2c-core: driver [bma2x2-accel] using legacy resume method
627[    5.755437] i2c-core: driver [bmi160] using legacy suspend method
628[    5.761346] i2c-core: driver [bmi160] using legacy resume method
629[    5.768374] qcom,qpnp-rtc qpnp-rtc-6: rtc core: registered qpnp_rtc as rtc0
630[    5.774689] i2c /dev entries driver
631[    5.782209] platform 1d00000.qcom,vidc: Driver msm_vidc_v4l2 requests probe deferral
632[    5.792430] msm_actuator_i2c_probe:1313 msm_actuator_i2c_probe: succeeded
633[    5.798835] LED trigger flashlight-trigger failed to register (-17)
634[    5.805604] adp1660 i2c_add_driver success
635[    5.808911] msm_flash_init_module:1114 Enter
636[    5.813352] msm_flash_lm3642_init entry
637[    5.817946] msm_eeprom_parse_memory_map: pageen not needed
638[    5.822403] msm_eeprom_parse_memory_map: pageen not needed
639[    5.827962] msm_eeprom_parse_memory_map: pageen not needed
640[    5.864664] i2c-msm-v2 78b7000.i2c: msm_bus_scale_register_client(mstr-id:86):0x9 (ok)
641[    5.871926] i2c-msm-v2 78b7000.i2c: NACK: slave not responding, ensure its powered: msgs(n:1 cur:0 tx) bc(rx:0 tx:3) mode:FIFO slv_addr:0x36 MSTR_STS:0x0d1300c8 OPER:0x00000090
642[    5.903465] read_eeprom_memory: page write failed
643[    5.907127] msm_eeprom_i2c_probe read_eeprom_memory failed
644[    5.943511] msm_eeprom_i2c_probe failed! rc = -107
645[    5.947271] msm_eeprom: probe of 3-006c failed with error -107
646[    5.955330] g_sctrl[0] ed8c2800
647[    5.957609] msm_camera_get_dt_gpio_req_tbl gpio req tbl index 2 invalid
648[    5.964085] failed
649[    5.965849] failed: msm_sensor_driver_get_gpio_data rc -22failed: rc -22
650[    5.972534] failed: msm_sensor_driver_parse rc -22[    5.977432] camera: probe of 3-0001 failed with error -22
651[    5.982740] gc0310_init_module:487
652[    5.990049] BMS: bms_get_adc: vadc not found - defer probe rc=-517
653[    5.995244] BMS: qpnp_vm_bms_probe: Failed to get adc rc=-517
654[    6.000937] spmi qpnp-vm-bms-10: Driver qcom,qpnp-vm-bms requests probe deferral
655[    6.008592] CHG: qpnp_lbc_main_probe: Failed to read DT properties rc=-517
656[    6.015211] spmi qpnp-linear-charger-8: Driver qcom,qpnp-linear-charger requests probe deferral
657[    6.024565] unable to find DT imem DLOAD mode node
658[    6.028914] unable to find DT imem EDLOAD mode node
659[    6.035004] qpnp_vadc_get_temp: VADC read error with -517
660[    6.039365] thermal thermal_zone0: failed to read out thermal zone 0
661[    6.046044] qpnp_vadc_get_temp: VADC read error with -517
662[    6.051084] thermal thermal_zone1: failed to read out thermal zone 1
663[    6.057688] qpnp_vadc_get_temp: VADC read error with -517
664[    6.062803] thermal thermal_zone2: failed to read out thermal zone 2
665[    6.088333] device-mapper: ioctl: 4.24.0-ioctl (2013-01-15) initialised: dm-devel@redhat.com
666[    6.096072] device-mapper: req-crypt: dm-req-crypt successfully initalized.
667[    6.096072] 
668[    6.104512] cpuidle: using governor ladder
669[    6.108231] cpuidle: using governor menu
670[    6.112224] sdhci: Secure Digital Host Controller Interface driver
671[    6.118380] sdhci: Copyright(c) Pierre Ossman
672[    6.122638] sdhci-pltfm: SDHCI platform and OF driver helper
673[    6.135614] sdhci_msm 7824900.sdhci: host_use_default_qos = 1
674[    6.140325] sdhci_msm 7824900.sdhci: For qos_policy(default qos) = 0, tbl_sz = 3, qos type = 2
675[    6.148966] sdhci_msm 7824900.sdhci: 	dma_latency = 2
676[    6.153983] sdhci_msm 7824900.sdhci: 	dma_latency = 241
677[    6.159158] sdhci_msm 7824900.sdhci: 	dma_latency = 501
678[    6.164402] sdhci_msm 7824900.sdhci: For qos_policy(modified dynamic qos) = 1, tbl_sz = 1, qos type = 2
679[    6.173772] sdhci_msm 7824900.sdhci: 	dma_latency = 200
680[    6.178951] sdhci_msm 7824900.sdhci: For qos_policy(modified dynamic qos) = 2, tbl_sz = 1, qos type = 2
681[    6.188358] sdhci_msm 7824900.sdhci: 	dma_latency = 200
682[    6.193562] sdhci_msm 7824900.sdhci: Host using default pm_qos
683[    6.200596] mmc0: no vqmmc regulator found
684[    6.203702] mmc0: no vmmc regulator found
685[    6.237118] mmc0: SDHCI controller on 7824900.sdhci [7824900.sdhci] using 32-bit ADMA
686[    6.251411] sdhci_msm 7864900.sdhci: host_use_default_qos = 1
687[    6.256175] sdhci_msm 7864900.sdhci: For qos_policy(default qos) = 0, tbl_sz = 3, qos type = 2
688[    6.264746] sdhci_msm 7864900.sdhci: 	dma_latency = 2
689[    6.269748] sdhci_msm 7864900.sdhci: 	dma_latency = 241
690[    6.274990] sdhci_msm 7864900.sdhci: 	dma_latency = 501
691[    6.280316] sdhci_msm 7864900.sdhci: For qos_policy(modified dynamic qos) = 1, tbl_sz = 1, qos type = 2
692[    6.289716] sdhci_msm 7864900.sdhci: 	dma_latency = 200
693[    6.294808] sdhci_msm 7864900.sdhci: For qos_policy(modified dynamic qos) = 2, tbl_sz = 1, qos type = 2
694[    6.304298] sdhci_msm 7864900.sdhci: 	dma_latency = 200
695[    6.309474] sdhci_msm 7864900.sdhci: Host using default pm_qos
696[    6.317136] mmc1: no vqmmc regulator found
697[    6.320344] mmc1: no vmmc regulator found
698[    6.356729] mmc1: SDHCI controller on 7864900.sdhci [7864900.sdhci] using 32-bit ADMA
699[    6.364131] qcom,leds-qpnp: probe of leds-qpnp-7 failed with error -10
700[    6.377104] mmc0: BKOPS_EN bit = 0
701[    6.388945] qce 720000.qcedev: Qualcomm Crypto 5.3.1 device found @0x720000
702[    6.394956] qce 720000.qcedev: CE device = 0x0
703[    6.394956] , IO base, CE = 0xf0680000
704[    6.394956] , Consumer (IN) PIPE 2,    Producer (OUT) PIPE 3
705[    6.394956] IO base BAM = 0x  (null)
706[    6.394956] BAM IRQ 239
707[    6.394956] Engines Availability = 0x2010853
708[    6.419010] sps:BAM 0x00704000 is registered.
709[    6.427761] mmc0: new HS200 MMC card at address 0001
710[    6.428919] sps:BAM 0x00704000 (va:0xf06c0000) enabled: ver:0x25, number of pipes:8
711[    6.440366] mmcblk0: mmc0:0001 HAG4a2 14.6 GiB 
712[    6.444435] mmcblk0rpmb: mmc0:0001 HAG4a2 partition 3 4.00 MiB
713[    6.445287] QCE50: qce_sps_init:  Qualcomm MSM CE-BAM at 0x0000000000704000 irq 239
714[    6.445974] qcedev: FIPS140-2 Known Answer Tests : Skipped
715[    6.464586] qcrypto 720000.qcrypto: Qualcomm Crypto 5.3.1 device found @0x720000
716[    6.470960] qcrypto 720000.qcrypto: CE device = 0x0
717[    6.470960] , IO base, CE = 0xf07c0000
718[    6.470960] , Consumer (IN) PIPE 4,    Producer (OUT) PIPE 5
719[    6.470960] IO base BAM = 0x  (null)
720[    6.470960] BAM IRQ 239
721[    6.470960] Engines Availability = 0x2010853
722[    6.473713]  mmcblk0: p1 p2 p3 p4 p5 p6 p7 p8 p9 p10 p11 p12 p13 p14 p15 p16 p17 p18 p19 p20 p21 p22 p23 p24 p25 p26 p27 p28 p29 p30 p31 p32 p33
723[    6.519897] QCE50: qce_sps_init:  Qualcomm MSM CE-BAM at 0x0000000000704000 irq 239
724[    6.527588] qcrypto 720000.qcrypto: qcrypto-ecb-aes
725[    6.531686] qcrypto 720000.qcrypto: qcrypto-cbc-aes
726[    6.536609] qcrypto 720000.qcrypto: qcrypto-ctr-aes
727[    6.541372] qcrypto 720000.qcrypto: qcrypto-ecb-des
728[    6.546272] qcrypto 720000.qcrypto: qcrypto-cbc-des
729[    6.551091] qcrypto 720000.qcrypto: qcrypto-ecb-3des
730[    6.556069] qcrypto 720000.qcrypto: qcrypto-cbc-3des
731[    6.561077] qcrypto 720000.qcrypto: qcrypto-xts-aes
732[    6.566075] qcrypto 720000.qcrypto: qcrypto-sha1
733[    6.570586] qcrypto 720000.qcrypto: qcrypto-sha256
734[    6.575317] qcrypto 720000.qcrypto: qcrypto-aead-hmac-sha1-cbc-aes
735[    6.581405] qcrypto 720000.qcrypto: qcrypto-aead-hmac-sha1-cbc-des
736[    6.587615] qcrypto 720000.qcrypto: qcrypto-aead-hmac-sha1-cbc-3des
737[    6.593987] qcrypto 720000.qcrypto: qcrypto-aead-hmac-sha256-cbc-aes
738[    6.600187] qcrypto 720000.qcrypto: qcrypto-aead-hmac-sha256-cbc-des
739[    6.606566] qcrypto 720000.qcrypto: qcrypto-aead-hmac-sha256-cbc-3des
740[    6.612914] qcrypto 720000.qcrypto: qcrypto-hmac-sha1
741[    6.618019] qcrypto 720000.qcrypto: qcrypto-hmac-sha256
742[    6.623136] qcrypto 720000.qcrypto: qcrypto-aes-ccm
743[    6.628128] qcrypto 720000.qcrypto: qcrypto-rfc4309-aes-ccm
744[    6.633362] qcrypto: FIPS140-2 Known Answer Tests: Skipped
745[    6.639931] usbcore: registered new interface driver usbhid
746[    6.644509] usbhid: USB HID core driver
747[    6.648945] zram: Created 1 device(s) ...
748[    6.653041] ashmem: initialized
749[    6.656636] logger: created 256K log 'log_main'
750[    6.661372] logger: created 256K log 'log_events'
751[    6.666291] logger: created 256K log 'log_radio'
752[    6.670932] logger: created 256K log 'log_system'
753[    6.675797] sps:BAM 0x078c4000 is registered.
754[    6.679396] qcom,qpnp-power-on qpnp-power-on-1: PMIC@SID0 Power-on reason: Triggered from Hard Reset and 'cold' boot
755[    6.689718] qcom,qpnp-power-on qpnp-power-on-1: PMIC@SID0: Power-off reason: Triggered from PS_HOLD (PS_HOLD/MSM controlled shutdown)
756[    6.702023] input: qpnp_pon as /devices/virtual/input/input2
757[    6.709440] PMIC@SID0: PM8909 v1.1 options: 0, 2, 0, 0
758[    6.731606] populate_opp_table: clock-a7: OPP tables populated (cpu 3)
759[    6.737195] print_opp_table: clock_cpu: a7: OPP voltage for 400000000: 4
760[    6.743844] print_opp_table: clock_cpu: a7: OPP voltage for 1094400000: 7
761[    6.752623] bimc-bwmon 410000.qcom,gpu-bwmon: BW HWmon governor registered.
762[    6.758877] bimc-bwmon 408000.qcom,cpu-bwmon: BW HWmon governor registered.
763[    6.768639] devfreq qcom,cpubw.32: Couldn't update frequency transition information.
764[    6.780334] coresight-fuse 5e01c.fuse: Fuse initialized
765[    6.780394] mmc1: new ultra high speed SDR25 SDHC card at address e624
766[    6.791169] mmcblk1: mmc1:e624 SS16G 14.8 GiB 
767[    6.791978] coresight-cti 810000.cti: CTI initialized
768[    6.792235] coresight-cti 811000.cti: CTI initialized
769[    6.792476] coresight-cti 812000.cti: CTI initialized
770[    6.792691] coresight-cti 813000.cti: CTI initialized
771[    6.792929] coresight-cti 814000.cti: CTI initialized
772[    6.793167] coresight-cti 815000.cti: CTI initialized
773[    6.793609] coresight-cti 816000.cti: CTI initialized
774[    6.793867] coresight-cti 817000.cti: CTI initialized
775[    6.794109] coresight-cti 818000.cti: CTI initialized
776[    6.794341] coresight-cti 851000.cti: CTI initialized
777[    6.794645] coresight-cti 852000.cti: CTI initialized
778[    6.794904] coresight-cti 853000.cti: CTI initialized
779[    6.795143] coresight-cti 854000.cti: CTI initialized
780[    6.795392] coresight-cti 83c000.cti: CTI initialized
781[    6.795637] coresight-cti 838000.cti: CTI initialized
782[    6.795856] coresight-cti 835000.cti: CTI initialized
783[    6.796101] coresight-cti 830000.cti: CTI initialized
784[    6.796786] coresight-csr 801000.csr: CSR initialized
785[    6.797447] coresight-tmc 826000.tmc: Byte Counter feature enabled
786[    6.797750] sps:BAM 0x00884000 is registered.
787[    6.797751] coresight-tmc 826000.tmc: TMC initialized
788[    6.798157] coresight-tmc 825000.tmc: TMC initialized
789[    6.800668] nidnt boot config: 0
790[    6.802130] coresight-tpiu 820000.tpiu: NIDnT on SDCARD only mode
791[    6.802297] coresight-tpiu 820000.tpiu: TPIU initialized
792[    6.803059] coresight-funnel 821000.funnel: FUNNEL initialized
793[    6.803250] coresight-funnel 869000.funnel: FUNNEL initialized
794[    6.803413] coresight-funnel 868000.funnel: FUNNEL initialized
795[    6.803717] coresight-funnel 855000.funnel: FUNNEL initialized
796[    6.804307] coresight-replicator 824000.replicator: REPLICATOR initialized
797[    6.804983] coresight-dbgui 86d000.dbgui: DebugUI capture enabled
798[    6.805160] coresight-dbgui 86d000.dbgui: DebugUI initializaed
799[    6.805890] coresight-stm 802000.stm: STM initialized
800[    6.806476] coresight-hwevent 86c000.hwevent: Hardware Event driver initialized
801[    6.975982] coresight-etm 84c000.etm: ETM initialized
802[    6.981110] coresight-etm 84d000.etm: ETM initialized
803[    6.986180] coresight-etm 84e000.etm: ETM initialized
804[    6.990431]  mmcblk1: p1
805[    6.993839] coresight-etm 84f000.etm: ETM initialized
806[    6.999494] coresight-modem-etm modem_etm0.26: Modem ETM initialized
807[    7.005950] coresight-wcn-etm wcn_etm0.25: Wireless ETM initialized
808[    7.012161] coresight-rpm-etm rpm_etm0.24: RPM ETM initialized
809[    7.017899] coresight-qpdi 1941000.qpdi: CoreSight QPDI driver initialized
810[    7.024580] usbcore: registered new interface driver snd-usb-audio
811[    7.031332] spmi msm8x16_wcd_codec-12: Driver wcd-spmi-core requests probe deferral
812[    7.039081] spmi msm8x16_wcd_codec-13: Driver wcd-spmi-core requests probe deferral
813[    7.061841] msm-pcm-lpa qcom,msm-pcm-lpa.46: msm_pcm_probe: dev name qcom,msm-pcm-lpa.46
814[    7.070003] platform qcom,msm-voip-dsp.48: Driver msm-voip-dsp requests probe deferral
815[    7.077516] platform qcom,msm-pcm-voice.49: Driver msm-pcm-voice requests probe deferral
816[    7.093688] msm8x16-asoc-wcd sound.71: default codec configured
817[    7.100541] msm8x16-asoc-wcd sound.71: ASoC: platform (null) not registered
818[    7.106576] msm8x16-asoc-wcd sound.71: snd_soc_register_card failed (-517)
819[    7.113492] platform sound.71: Driver msm8x16-asoc-wcd requests probe deferral
820[    7.120996] u32 classifier
821[    7.123215]     Actions configured
822[    7.126723] Netfilter messages via NETLINK v0.30.
823[    7.131398] nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
824[    7.138349] ctnetlink v0.93: registering with nfnetlink.
825[    7.143304] NF_TPROXY: Transparent proxy support initialized, version 4.1.0
826[    7.149672] NF_TPROXY: Copyright (c) 2006-2007 BalaBit IT Ltd.
827[    7.156161] xt_time: kernel timezone is -0000
828[    7.160135] ip_tables: (C) 2000-2006 Netfilter Core Team
829[    7.165381] arp_tables: (C) 2002 David S. Miller
830[    7.169750] TCP: cubic registered
831[    7.172955] Initializing XFRM netlink socket
832[    7.178263] NET: Registered protocol family 10
833[    7.182867] mip6: Mobile IPv6
834[    7.184930] ip6_tables: (C) 2000-2006 Netfilter Core Team
835[    7.190447] sit: IPv6 over IPv4 tunneling driver
836[    7.195615] NET: Registered protocol family 17
837[    7.199236] NET: Registered protocol family 15
838[    7.203816] Bridge firewalling registered
839[    7.207635] Ebtables v2.0 registered
840[    7.211634] Bluetooth: ee855ef0
841[    7.214216] Bluetooth: ee855ef0Bluetooth: ee855f00
842[    7.218910] Bluetooth: ee855ed8Bluetooth: ee855ed8
843[    7.223789] Bluetooth: ee855ed0Bluetooth: ee855f10
844[    7.228469] Bluetooth: ee855f10[    7.231624] l2tp_core: L2TP core driver, V2.0
845[    7.235982] l2tp_ppp: PPPoL2TP kernel driver, V2.0
846[    7.240697] l2tp_ip: L2TP IP encapsulation support (L2TPv3)
847[    7.246330] l2tp_netlink: L2TP netlink interface
848[    7.250899] l2tp_eth: L2TP ethernet pseudowire support (L2TPv3)
849[    7.256866] l2tp_debugfs: L2TP debugfs support
850[    7.261183] l2tp_ip6: L2TP IP encapsulation support for IPv6 (L2TPv3)
851[    7.279691] of_batterydata_read_data: palladium_1500mah loaded
852[    7.296418] BMS: bms_load_hw_defaults: BMS_EN=1 Sample_Interval-S1=[100]S2=[70]  Sample_Count-S1=[256]S2=[128] Fifo_Length-S1=[5]S2=[5] FSM_state=2
853[    7.316234] BMS: calculate_initial_soc: warm_reset=0 est_ocv=0  shutdown_soc_invalid=0 shutdown_ocv=4137000 shutdown_soc=97 last_soc=97 calculated_soc=97 last_ocv_uv=4137000
854[    7.344939] BMS: qpnp_vm_bms_probe: probe success: soc=97 vbatt=4054567 ocv=4137000 warm_reset=0
855[    7.521810] CHG: qpnp_lbc_main_probe: Probe chg_dis=0 bpd=1 usb=1 batt_pres=1 batt_volt=4054253 soc=97
856[    7.530229] spmi msm8x16_wcd_codec-12: Driver wcd-spmi-core requests probe deferral
857[    7.537820] spmi msm8x16_wcd_codec-13: Driver wcd-spmi-core requests probe deferral
858[    7.558198] msm8x16-asoc-wcd sound.71: default codec configured
859[    7.565317] msm8x16-asoc-wcd sound.71: ASoC: CODEC (null) not registered
860[    7.571022] msm8x16-asoc-wcd sound.71: snd_soc_register_card failed (-517)
861[    7.578090] platform sound.71: Driver msm8x16-asoc-wcd requests probe deferral
862[    7.585181] spmi msm8x16_wcd_codec-12: Driver wcd-spmi-core requests probe deferral
863[    7.592743] spmi msm8x16_wcd_codec-13: Driver wcd-spmi-core requests probe deferral
864[    7.601227] Registering SWP/SWPB emulation handler
865[    7.606387] Loading module verification certificates
866[    7.617443] MODSIGN: Loaded cert 'Magrathea: Glacier signing key: 0c72b4353433056b2cc9d98393df985ebf3803cb'
867[    7.757409] oem_otg_ext_vreg: disabling
868[    7.760213] spk_vreg: disabling
869[    7.763372] regulator-dummy: disabling
870[    7.767946] msm8x16-asoc-wcd sound.71: default codec configured
871[    7.775204] msm8x16-asoc-wcd sound.71: ASoC: CODEC (null) not registered
872[    7.780912] msm8x16-asoc-wcd sound.71: snd_soc_register_card failed (-517)
873[    7.788056] platform sound.71: Driver msm8x16-asoc-wcd requests probe deferral
874[    7.795106] spmi msm8x16_wcd_codec-12: Driver wcd-spmi-core requests probe deferral
875[    7.802632] spmi msm8x16_wcd_codec-13: Driver wcd-spmi-core requests probe deferral
876[    7.812137] file system registered
877[    7.814633] mbim_init: initialize 1 instances
878[    7.818935] mbim_init: Initialized 1 ports
879[    7.822917] mbim_bam_setup: no_ports:1
880[    7.826927] mbim_bam_setup: Initialized 1 ports
881[    7.833094] rndis_qc_init: initialize rndis QC instance
882[    7.838115] android_usb gadget: Mass Storage Function, version: 2009/09/11
883[    7.844178] android_usb gadget: Number of LUNs=1
884[    7.848740]  lun0: LUN: removable file: (no medium)
885[    7.854270] android_usb gadget: android_usb ready
886[    7.858290] msm_hsusb msm_hsusb: [ci13xxx_start] hw_ep_max = 16
887[    7.864294] msm_hsusb msm_hsusb: CI13XXX_CONTROLLER_RESET_EVENT received
888[    7.871876] msm8x16-asoc-wcd sound.71: default codec configured
889[    7.873908] input: gpio-keys as /devices/soc.0/gpio_keys.70/input/input3
890[    7.883530] qcom,qpnp-rtc qpnp-rtc-6: setting system clock to 1970-01-01 00:11:15 UTC (675)
891[    7.885819] msm8x16-asoc-wcd sound.71: ASoC: CODEC (null) not registered
892[    7.885868] msm8x16-asoc-wcd sound.71: snd_soc_register_card failed (-517)
893[    7.886021] platform sound.71: Driver msm8x16-asoc-wcd requests probe deferral
894[    7.886143] spmi msm8x16_wcd_codec-12: Driver wcd-spmi-core requests probe deferral
895[    7.886209] spmi msm8x16_wcd_codec-13: Driver wcd-spmi-core requests probe deferral
896[    7.886909] msm8x16-asoc-wcd sound.71: default codec configured
897[    7.889015] msm8x16-asoc-wcd sound.71: ASoC: CODEC (null) not registered
898[    7.889057] msm8x16-asoc-wcd sound.71: snd_soc_register_card failed (-517)
899[    7.889188] platform sound.71: Driver msm8x16-asoc-wcd requests probe deferral
900[    7.955966] msm_thermal:interrupt_mode_init Interrupt mode init
901[    7.962692] spmi msm8x16_wcd_codec-12: Driver wcd-spmi-core requests probe deferral
902[    7.963488] /soc/qcom,lpm-levels/qcom,pm-cluster@0: No CPU phandle, assuming single cluster
903[    7.977763] spmi msm8x16_wcd_codec-13: Driver wcd-spmi-core requests probe deferral
904[    7.986103] msm8x16-asoc-wcd sound.71: default codec configured
905[    7.993338] msm8x16-asoc-wcd sound.71: ASoC: CODEC (null) not registered
906[    7.999181] msm8x16-asoc-wcd sound.71: snd_soc_register_card failed (-517)
907[    8.002458] led_gpio_flash_probe:probe successfully!
908[    8.006877] qcom,cc-debug-8909 1874000.qcom,cc-debug: Registered Debug Mux successfully
909[    8.007652] ---+++ get pwm-freq prop failed
910[    8.007655] ---+++ get pwm-duty prop failed
911[    8.007779] ---+++ gpio_clk_probe succeeded
912[    8.008168] clock_late_init: Removing enables held for handed-off clocks
913[    8.011058] ALSA device list:
914[    8.011061]   No soundcards`+�r��������platform sound.71: Driver msm8x16-asoc-wcd requests probe deferral
915[    8.050959] spmi msm8x16_wcd_codec-12: Driver wcd-spmi-core requests probe deferral
916[    8.051429] Freeing unused kernel memory: 396K (c1100000 - c1163000)
917[    8.065016] spmi msm8x16_wcd_codec-13: Driver wcd-spmi-core requests probe deferral
918[    8.073218] msm8x16-asoc-wcd sound.71: default codec configured
919[    8.080550] msm8x16-asoc-wcd sound.71: ASoC: CODEC (null) not registered
920[    8.086335] msm8x16-asoc-wcd sound.71: snd_soc_register_card failed (-517)
921[    8.093203] platform sound.71: Driver msm8x16-asoc-wcd requests probe deferral
922[    8.113982] init: init first stage started!
923[    8.245821] type=1403 audit(675.859:2): policy loaded auid=4294967295 ses=4294967295
924[    8.254022] type=1404 audit(675.869:3): enforcing=1 old_enforcing=0 auid=4294967295 ses=4294967295
925[    8.373860] init: (Initializing SELinux enforcing took 0.26s.)
926[    8.388385] init: init second stage started!
927[    8.405183] init: property_set("ro.boot.bootdevice", "7824900.sdhci") failed
928[    8.419637] init: Running restorecon...
929[    8.725642] init: waitpid failed: No child processes
930[    8.730292] init: (Loading properties from /default.prop took 0.00s.)
931[    8.741130] init: /init.rc: 679: invalid keyword 'setprop'
932[    8.745769] init: /init.rc: 680: invalid keyword 'chmod'
933[    8.750902] init: /init.rc: 681: invalid keyword 'chown'
934[    8.756492] init: (Parsing /init.environ.rc took 0.00s.)
935[    8.762754] init: (Parsing /init.usb.rc took 0.00s.)
936[    8.771974] init: /init.qcom.rc: 582: user requires 1 argument
937[    8.779780] init: ignored duplicate definition of service 'RIDL'init: (Parsing init.qcom.usb.rc took 0.01s.)
938[    8.802248] init: ignored duplicate definition of service 'perfd'init: init.target.rc: 151: invalid keyword 'load_all_props'
939[    8.813621] init: ignored duplicate definition of service 'poweroffhandler'init: (Parsing init.carrier.rc took 0.01s.)
940[    8.823300] init: (Parsing init.target.rc took 0.02s.)
941[    8.830396] init: (Parsing init.qcom.factory.rc took 0.00s.)
942[    8.835101] init: (Parsing /init.qcom.rc took 0.07s.)
943[    8.842730] init: (Parsing /init.usb.configfs.rc took 0.00s.)
944[    8.847709] init: (Parsing /init.zygote32.rc took 0.00s.)
945[    8.852841] init: (Parsing /init.rc took 0.12s.)
946[    8.858688] init: Starting service 'ueventd'...
947[    8.864802] init: Waiting for /dev/.coldboot_done...
948[    8.869048] ueventd: ueventd started!
949[    9.923110] ueventd: Coldboot took 1.04s.
950[    9.924522] init: Waiting for /dev/.coldboot_done too[    9.946921] init: write_file: Unable to open '/proc/sys/kernel/hung_task_timeout_secs': No such file or directory
951[    9.968361] init: write_file: Unable to open '/proc/sys/abi/swp': No such file or directory
952[   10.079633] EXT4-fs (mmcblk0p21): mounted filesystem with ordered data mode. Opts: barrier=1
953[   10.087266] fs_mgr: __mount(source=/dev/block/bootdevice/by-name/system,target=/system,type=ext4)=0
954[   10.097323] EXT4-fs (mmcblk0p33): Ignoring removed nomblk_io_submit option
955[   10.110169] EXT4-fs (mmcblk0p33): mounted filesystem with ordered data mode. Opts: errors=remount-ro,nomblk_io_submit
956[   10.120011] fs_mgr: check_fs(): mount(/dev/block/bootdevice/by-name/userdata,/data,ext4)=0: Success
957[   10.130649] fs_mgr: check_fs(): unmount(/data) succeeded
958[   10.136556] fs_mgr: Running /system/bin/e2fsck on /dev/block/bootdevice/by-name/userdata
959[   11.025430] e2fsck (238) used greatest stack depth: 5444 bytes left
960[   11.031167] e2fsck: e2fsck 1.42.9 (28-Dec-2013)
961[   11.031167] 
962[   11.036864] e2fsck: Pass 1: Checking inodes, blocks, and sizes
963[   11.036864] 
964[   11.044045] e2fsck: Pass 2: Checking directory structure
965[   11.044045] 
966[   11.050722] e2fsck: Pass 3: Checking directory connectivity
967[   11.050722] 
968[   11.057816] e2fsck: Pass 4: Checking reference counts
969[   11.057816] 
970[   11.064336] e2fsck: Pass 5: Checking group summary information
971[   11.064336] 
972[   11.071556] e2fsck: data: 3596/316992 files (9.0% non-contiguous), 107588/1267451 blocks
973[   11.071556] 
974[   11.087063] EXT4-fs (mmcblk0p33): mounted filesystem with ordered data mode. Opts: barrier=1,noauto_da_alloc,discard
975[   11.096851] fs_mgr: __mount(source=/dev/block/bootdevice/by-name/userdata,target=/data,type=ext4)=0
976[   11.110700] init (232) used greatest stack depth: 5224 bytes left
977[   11.125574] init: (Parsing /system/etc/init/atrace.rc took 0.00s.)
978[   11.131421] init: (Parsing /system/etc/init/audioserver.rc took 0.00s.)
979[   11.138142] init: (Parsing /system/etc/init/bootanim.rc took 0.00s.)
980[   11.144562] init: (Parsing /system/etc/init/bootstat.rc took 0.00s.)
981[   11.150665] init: (Parsing /system/etc/init/cameraserver.rc took 0.00s.)
982[   11.157558] init: (Parsing /system/etc/init/debuggerd.rc took 0.00s.)
983[   11.163774] init: (Parsing /system/etc/init/drmserver.rc took 0.00s.)
984[   11.170451] init: (Parsing /system/etc/init/dumpstate.rc took 0.00s.)
985[   11.176696] init: (Parsing /system/etc/init/gatekeeperd.rc took 0.00s.)
986[   11.183203] init: (Parsing /system/etc/init/init-debug.rc took 0.00s.)
987[   11.189730] init: (Parsing /system/etc/init/installd.rc took 0.00s.)
988[   11.196081] init: (Parsing /system/etc/init/keystore.rc took 0.00s.)
989[   11.202257] init: (Parsing /system/etc/init/lmkd.rc took 0.00s.)
990[   11.209027] init: (Parsing /system/etc/init/logcatd.rc took 0.00s.)
991[   11.215029] init: (Parsing /system/etc/init/logd.rc took 0.00s.)
992[   11.220878] init: (Parsing /system/etc/init/mdnsd.rc took 0.00s.)
993[   11.227025] init: (Parsing /system/etc/init/mediacodec.rc took 0.00s.)
994[   11.233376] init: (Parsing /system/etc/init/mediadrmserver.rc took 0.00s.)
995[   11.240333] init: (Parsing /system/etc/init/mediaextractor.rc took 0.00s.)
996[   11.247211] init: (Parsing /system/etc/init/mediaserver.rc took 0.00s.)
997[   11.253792] init: (Parsing /system/etc/init/mtpd.rc took 0.00s.)
998[   11.259725] init: (Parsing /system/etc/init/netd.rc took 0.00s.)
999[   11.265773] init: (Parsing /system/etc/init/perfprofd.rc took 0.00s.)
1000[   11.272070] init: (Parsing /system/etc/init/racoon.rc took 0.00s.)
1001[   11.278398] init: (Parsing /system/etc/init/rild.rc took 0.00s.)
1002[   11.284466] init: (Parsing /system/etc/init/servicemanager.rc took 0.00s.)
1003[   11.291105] init: (Parsing /system/etc/init/surfaceflinger.rc took 0.00s.)
1004[   11.298122] init: (Parsing /system/etc/init/uncrypt.rc took 0.00s.)
1005[   11.304529] init: (Parsing /system/etc/init/vdc.rc took 0.00s.)
1006[   11.310211] init: (Parsing /system/etc/init/vold.rc took 0.00s.)
1007[   11.323305] EXT4-fs (mmcblk0p23): warning: maximal mount count reached, running e2fsck is recommended
1008[   11.332173] EXT4-fs (mmcblk0p23): mounted filesystem with ordered data mode. Opts: barrier=1
1009[   11.347151] EXT4-fs (mmcblk0p22): warning: maximal mount count reached, running e2fsck is recommended
1010[   11.356009] EXT4-fs (mmcblk0p22): mounted filesystem with ordered data mode. Opts: barrier=1
1011[   11.374880] EXT4-fs (mmcblk0p27): VFS: Can't find ext4 filesystem
1012[   11.382614] init: Starting service 'logd'...
1013[   11.440977] logd.auditd: start
1014[   11.443035] logd.klogd: 11439592651
1015[   12.210112] init: (Loading properties from /system/vendor/Default/system/vendor/vendor.prop took 0.00s.)
1016[   12.218741] init: (Loading properties from /persist/speccfg/vendor_ro.prop took 0.01s.)
1017[   12.230029] init: (Loading properties from /system/vendor/vendor.prop took 0.00s.)
1018[   12.237799] init: (Loading properties from /system/vendor/Default/system/vendor/vendor.prop took 0.00s.)
1019[   12.246413] init: (Loading properties from /persist/speccfg/vendor_persist.prop took 0.01s.)
1020[   12.255779] init: property_set("ro.telephony.default_network", "22,20") failed
1021[   12.262092] init: (Loading properties from /system/vendor/default.prop took 0.01s.)
1022[   12.269814] init: (Loading properties from /system/vendor/power.prop took 0.00s.)
1023[   12.277197] init: (Loading properties from /system/build.prop took 0.07s.)
1024[   12.284175] init: (Loading properties from /vendor/build.prop took 0.00s.)
1025[   12.290832] init: (Loading properties from /factory/factory.prop took 0.00s.)
1026[   12.298268] init: /recovery not specified in fstab
1027[   12.303894] init: Starting service 'debuggerd'...
1028[   12.308649] init: do_start: Service debuggerd64 not found
1029[   12.316416] init: Starting service 'vold'...
1030[   12.323223] init: Not bootcharting.
1031[   12.606804] init: Starting service 'exec 1 (/system/bin/tzdatacheck)'...
1032[   12.647605] init: Service 'exec 1 (/system/bin/tzdatacheck)' (pid 263) exited with status 0
1033[   12.716891] init: Starting service 'carrier_switcher'...
1034[   12.724141] init: (Loading properties from /data/local.prop took 0.00s.)
1035[   12.896921] init: Starting service 'logd-reinit'...
1036[   12.902505] init: property 'persist.sys.ssr.enable_debug' doesn't exist while expanding '${persist.sys.ssr.enable_debug}'
1037[   12.912918] init: write: cannot expand '${persist.sys.ssr.enable_debug}'
1038[   12.919325] init: property 'persist.sys.mba_boot_timeout' doesn't exist while expanding '${persist.sys.mba_boot_timeout}'
1039[   12.930228] init: write: cannot expand '${persist.sys.mba_boot_timeout}'
1040[   12.936991] init: property 'persist.sys.modem_auth_timeout' doesn't exist while expanding '${persist.sys.modem_auth_timeout}'
1041[   12.937272] logd.daemon: reinit
1042[   12.951489] init: write: cannot expand '${persist.sys.modem_auth_timeout}'
1043[   12.958449] init: Service 'logd-reinit' (pid 267) exited with status 0
1044[   12.964805] init: property 'persist.sys.pil_proxy_timeout' doesn't exist while expanding '${persist.sys.pil_proxy_timeout}'
1045[   12.975796] init: write: cannot expand '${persist.sys.pil_proxy_timeout}'
1046[   12.985654] pil-q6v5-mss 4080000.qcom,mss: modem: loading from 0x88000000 to 0x8d300000
1047[   13.011241] pil-q6v5-mss 4080000.qcom,mss: MBA: loading from 0xaf400000 to 0xaf500000
1048[   13.064375] pil-q6v5-mss 4080000.qcom,mss: MBA boot done
1049[   13.831765] pil-q6v5-mss 4080000.qcom,mss: modem: Brought out of reset
1050[   13.908839] pil-q6v5-mss 4080000.qcom,mss: Subsystem error monitoring/handling services are up
1051[   13.916579] pil-q6v5-mss 4080000.qcom,mss: modem: Power/Clock ready interrupt received
1052[   13.916583] memshare: Modem Restart has happened
1053[   13.917038] init: Service 'carrier_switcher' (pid 264) exited with status 0
1054[   13.917494] init: Starting service 'exec 2 (/init.qcom.early_boot.sh)'...
1055[   13.944161] M-Notify: General: 7
1056[   13.945573] msm8x16-asoc-wcd sound.71: default codec configured
1057[   13.954767] msm-pcm-routing qcom,msm-pcm-routing.43: ASoC: no dapm match for VOICEMMODE1_DL --> VoiceMMode1 --> SEC_MI2S_RX_Voice Mixer
1058[   13.966042] msm-pcm-routing qcom,msm-pcm-routing.43: ASoC: Failed to add route VOICEMMODE1_DL -> VoiceMMode1 -> SEC_MI2S_RX_Voice Mixer
1059[   13.978215] msm-pcm-routing qcom,msm-pcm-routing.43: ASoC: no dapm match for VOICEMMODE2_DL --> VoiceMMode2 --> SEC_MI2S_RX_Voice Mixer
1060[   13.990309] msm-pcm-routing qcom,msm-pcm-routing.43: ASoC: Failed to add route VOICEMMODE2_DL -> VoiceMMode2 -> SEC_MI2S_RX_Voice Mixer
1061[   14.006775] msm-pcm-routing qcom,msm-pcm-routing.43: ASoC: no dapm match for VOICE2_STUB_DL --> Voice2 Stub --> INTERNAL_BT_SCO_RX_Voice Mixer
1062[   14.018625] msm-pcm-routing qcom,msm-pcm-routing.43: ASoC: Failed to add route VOICE2_STUB_DL -> Voice2 Stub -> INTERNAL_BT_SCO_RX_Voice Mixer
1063[   14.025343] sysmon-qmi: sysmon_clnt_svc_arrive: Connection established between QMI handle and modem's SSCTL service
1064[   14.074708] msm-pcm-routing qcom,msm-pcm-routing.43: ASoC: mux SLIM_0_RX AANC MUX has no paths
1065[   14.102890] wcd-spmi-core msm8x16_wcd_codec-12: ASoC: mux RX3 MIX1 INP3 has no paths
1066[   14.110077] wcd-spmi-core msm8x16_wcd_codec-12: ASoC: mux RX2 MIX1 INP3 has no paths
1067[   14.172229] init: property_set("ro.opengles.version", "196608") failed
1068[   14.736780] init: Service 'exec 2 (/init.qcom.early_boot.sh)' (pid 288) exited with status 0
1069[   14.749892] init: Starting service 'healthd'...
1070[   14.755298] init: Starting service 'qcom-debug'...
1071[   14.760610] binder: 324:324 transaction failed 29189, size 0-0
1072[   14.760761] init: Starting service 'qcom-c_core-sh'...
1073[   14.762452] init: Starting service 'config_bluetooth'...
1074[   14.764625] init: Starting service 'qseecomd'...
1075[   14.766592] init: Starting service 'per_mgr'...
1076[   14.768580] init: Starting service 'lmkd'...
1077[   14.770737] init: Starting service 'servicemanager'...
1078[   14.772882] init: Starting service 'surfaceflinger'...
1079[   14.788574] init: write_file: Unable to open '/proc/sys/net/ipv6/conf/rmnet0/accept_ra': No such file or directory
1080[   14.788644] init: write_file: Unable to open '/proc/sys/net/ipv6/conf/rmnet1/accept_ra': No such file or directory
1081[   14.788711] init: write_file: Unable to open '/proc/sys/net/ipv6/conf/rmnet2/accept_ra': No such file or directory
1082[   14.788776] init: write_file: Unable to open '/proc/sys/net/ipv6/conf/rmnet3/accept_ra': No such file or directory
1083[   14.788839] init: write_file: Unable to open '/proc/sys/net/ipv6/conf/rmnet4/accept_ra': No such file or directory
1084[   14.788901] init: write_file: Unable to open '/proc/sys/net/ipv6/conf/rmnet5/accept_ra': No such file or directory
1085[   14.788964] init: write_file: Unable to open '/proc/sys/net/ipv6/conf/rmnet6/accept_ra': No such file or directory
1086[   14.789027] init: write_file: Unable to open '/proc/sys/net/ipv6/conf/rmnet7/accept_ra': No such file or directory
1087[   14.789091] init: write_file: Unable to open '/proc/sys/net/ipv6/conf/rmnet_sdio0/accept_ra': No such file or directory
1088[   14.789156] init: write_file: Unable to open '/proc/sys/net/ipv6/conf/rmnet_sdio1/accept_ra': No such file or directory
1089[   14.789219] init: write_file: Unable to open '/proc/sys/net/ipv6/conf/rmnet_sdio2/accept_ra': No such file or directory
1090[   14.789284] init: write_file: Unable to open '/proc/sys/net/ipv6/conf/rmnet_sdio3/accept_ra': No such file or directory
1091[   14.789348] init: write_file: Unable to open '/proc/sys/net/ipv6/conf/rmnet_sdio4/accept_ra': No such file or directory
1092[   14.789411] init: write_file: Unable to open '/proc/sys/net/ipv6/conf/rmnet_sdio5/accept_ra': No such file or directory
1093[   14.789474] init: write_file: Unable to open '/proc/sys/net/ipv6/conf/rmnet_sdio6/accept_ra': No such file or directory
1094[   14.789537] init: write_file: Unable to open '/proc/sys/net/ipv6/conf/rmnet_sdio7/accept_ra': No such file or directory
1095[   14.789606] init: write_file: Unable to open '/proc/sys/net/ipv6/conf/rmnet_usb0/accept_ra': No such file or directory
1096[   14.789676] init: write_file: Unable to open '/proc/sys/net/ipv6/conf/rmnet_usb1/accept_ra': No such file or directory
1097[   14.789741] init: write_file: Unable to open '/proc/sys/net/ipv6/conf/rmnet_usb2/accept_ra': No such file or directory
1098[   14.789804] init: write_file: Unable to open '/proc/sys/net/ipv6/conf/rmnet_usb3/accept_ra': No such file or directory
1099[   14.791050] init: Starting service 'rmt_storage'...
1100[   15.031376] init: insmod: open("/system/lib/modules/adsprpc.ko") failed: No such file or directoryinit: Starting service 'console'...
1101�[   15.064984] init: Starting service 'adbd'...y disabled
1102[   15.070575] init: Starting service 'ppd'...
1103[   15.094439] init: cannot find '/system/bin/update_verifier' (No such file or directory), disabling 'exec 3 (/system/bin/update_verifier)'
1104[   15.110833] init: cannot find '/system/bin/install-recovery.sh' (No such file or directory), disabling 'flash_recovery'
1105[   15.136281] init: Starting service 'qcomsysd'...
1106[   15.143393] init: Starting service 'qcom-c_main-sh'...
1107[   15.156261] init: Starting service 'cnd'...
1108[   15.176934] init: Starting service 'irsc_util'...
1109[   15.205016] init: Starting service 'tftp_server'...
1110[   15.211307] init: Starting service 'ptt_socket_app'...
1111[   15.225276] init: Starting service 'cnss_diag'...
1112[   15.245065] init: Starting service 'atfwd_quec'...
1113msm8909:/ $ [   15.251171] handle_qmi_request: Error getting req_desc for msg_id 36
1114[   15.251295] init: Starting service 'quecserver'...
1115[   15.252566] init: cannot find '/system/bin/usb_uicc_client' (No such file or directory), disabling 'usb_uicc_daemon'
1116[   15.253404] init: Starting service 'bms-sh'...
1117[   15.265761] init: Starting service 'qcom-usb-sh'...
1118[   15.267003] init: cannot find '/system/bin/qrngd' (No such file or directory), disabling 'qrngd'
1119[   15.267989] init: Starting service 'thermal-engine'...
1120[   15.270125] init: Starting service 'wcnss-service'...
1121[   15.272380] init: Starting service 'imsstarter'...
1122[   15.293779] init: cannot find '/system/bin/dts_configurator' (No such file or directory), disabling 'dts_configurator'
1123[   15.294797] init: Starting service 'zygote'...
1124[   15.296981] init: Starting service 'audioserver'...
1125[   15.299250] init: Starting service 'cameraserver'...
1126[   15.301427] init: Starting service 'drm'...
1127[   15.308622] init: couldn't write 376 to /dev/cpuset/camera-daemon/tasks: No such file or directory
1128[   15.323915] init: Starting service 'installd'...
1129[   15.326568] init: Starting service 'keystore'...
1130[   15.329121] init: Starting service 'mediacodec'...
1131[   15.331680] init: Starting service 'mediadrm'...
1132[   15.353104] init: Starting service 'mediaextractor'...
1133[   15.355719] init: Starting service 'media'...
1134[   15.358014] init: Starting service 'netd'...
1135[   15.360489] init: Starting service 'ril-daemon'...
1136[   15.364538] init: Starting service 'dpmd'...
1137[   15.366877] init: Starting service 'cnss-daemon'...
1138[   15.369180] init: Starting service 'loc_launcher'...
1139[   15.371333] init: Starting service 'qcom-sh'...
1140[   15.382340] init: Service fuse_uicc0 does not have a SELinux domain defined.
1141[   15.383225] init: Starting service 'RIDL'...
1142[   15.385855] init: Starting service 'fidodaemon'...
1143[   15.388201] init: Starting service 'qcamerasvr'...
1144[   15.390478] init: Starting service 'time_daemon'...
1145[   15.392722] init: Starting service 'audiod'...
1146[   15.397946] init: Starting service 'gatekeeperd'...
1147[   15.506283] mem_share_svc_recv_msg: Error receiving message
1148[   15.644354] gbam_connect_work: Bam channel is not ready
1149[   15.785458] init: Starting service 'perfprofd'...
1150[   15.790667] init: Service 'qcom-debug' (pid 325) exited with status 0
1151[   15.864027] init: Service 'qcom-c_core-sh' (pid 326) exited with status 0
1152[   16.024185] healthd: BatteryTechnologyPath not found
1153[   16.028221] healthd: BatteryFullChargePath not found
1154[   16.033174] healthd: BatteryCycleCountPath not found
1155[   16.210860] init: Service 'irsc_util' (pid 353) exited with status 0
1156[   16.247414] init: Service 'cnss_diag' (pid 364) exited with status 255
1157[   16.306099] init: Starting service 'qmuxd'...
1158[   16.352416] init: Service 'bms-sh' (pid 368) exited with status 0
1159[   16.364151] init: Service 'keystore' (pid 380) exited with status 1
1160[   16.370027] init: Service 'keystore' (pid 380) killing any children in process group
1161[   16.415522] init: Starting service 'vm_bms'...
1162[   16.422022] init: cannot find '/system/bin/ipacm-diag' (No such file or directory), disabling 'ipacm-diag'
1163[   16.554783] init: Starting service 'imsqmidaemon'...
1164[   16.594356] init: Service 'imsstarter' (pid 372) exited with status 0
1165[   16.686763] init: cannot find '/system/bin/ipacm' (No such file or directory), disabling 'ipacm'
1166[   16.834681] QSEECOM: qseecom_load_app: App (keymaste) does'nt exist, loading apps for first time
1167[   16.913091] QSEECOM: qseecom_load_app: App with id 2 (keymaste) now loaded
1168[   17.026527] init: Starting service 'imsdatadaemon'...
1169[   17.064854] devbw qcom,gpubw.23: Governor already resumed!
1170[   17.069323] devbw qcom,gpubw.23: Unable to resume BW HW mon governor (-16)
1171[   17.201061] init: Starting service 'ril-daemon2'...
1172[   17.523859] init: Starting service 'qti'...
1173[   17.647465] init: Service 'qcom-usb-sh' (pid 369) exited with status 0
1174[   17.746693] init: Starting service 'netmgrd'...
1175[   17.976126] init: Service 'qcom-c_main-sh' (pid 345) exited with status 0
1176[   18.338311] init: Starting service 'bootanim'...
1177[   19.226353] msm_qti_pp_get_rms_value_control, back not active to query rms be_idx:3
1178[   19.249856] msm_dolby_dap_param_to_get_control_get, port_id not set, do not query ADM
1179[   19.267804] msm_dolby_dap_param_visualizer_control_get Incorrect VCNB length
1180[   19.295198] msm_voice_sound_focus_get: Error getting Sound Focus Params, err=-22
1181[   19.301971] msm_voice_source_tracking_get: Error getting Source Tracking Params, err=-22
1182[   19.333806] msm_audio_get_copp_idx_from_port_id: Invalid FE, exiting
1183[   19.339226] msm_audio_sound_focus_get: Could not get copp idx for port_id=16385
1184[   19.374983] msm_audio_get_copp_idx_from_port_id: Invalid FE, exiting
1185[   19.380397] msm_audio_source_tracking_get: Could not get copp idx for port_id=16385
1186[   19.403736] msm_voice_sound_focus_get: Error getting Sound Focus Params, err=-22
1187[   19.410366] msm_voice_source_tracking_get: Error getting Source Tracking Params, err=-22
1188[   19.473725] msm_audio_get_copp_idx_from_port_id: Invalid FE, exiting
1189[   19.479144] msm_audio_sound_focus_get: Could not get copp idx for port_id=4101
1190[   19.506682] msm_audio_get_copp_idx_from_port_id: Invalid FE, exiting
1191[   19.512012] msm_audio_sound_focus_get: Could not get copp idx for port_id=4103
1192[   19.544368] msm_audio_get_copp_idx_from_port_id: Invalid FE, exiting
1193[   19.549790] msm_audio_source_tracking_get: Could not get copp idx for port_id=4103
1194[   19.583633] msm_audio_get_copp_idx_from_port_id: Invalid FE, exiting
1195[   19.589066] msm_audio_source_tracking_get: Could not get copp idx for port_id=4101
1196[   19.684612] msm_pcm_volume_ctl_get substream runtime not found
1197[   19.689813] msm_pcm_volume_ctl_get substream runtime not found
1198[   19.710586] msm_pcm_volume_ctl_get substream runtime not found
1199[   19.717224] msm_pcm_volume_ctl_get substream runtime not found
1200[   19.722243] msm_pcm_volume_ctl_get substream or runtime not found
1201[   19.754174] msm_pcm_volume_ctl_get substream runtime not found
1202[   20.038987] init: Starting service 'keystore'...
1203[   20.085964] wcdcal_hwdep_ioctl_shared: codec didn't set this 0!!
1204[   20.096773] wcdcal_hwdep_ioctl_shared: codec didn't set this 1!!
1205[   20.124130] wcdcal_hwdep_ioctl_shared: codec didn't set this 3!!
1206[   20.139487] msm_ds2_dap_set_security_control: dmid 0 license key 0
1207[   20.163578] core_set_license: Invalid cal block to send
1208[   20.167602] msm_ds2_dap_set_security_control: failed to set dolby license[   20.184944] wcdcal_hwdep_ioctl_shared: codec didn't set this 0!!
1209[   20.190266] wcdcal_hwdep_ioctl_shared: codec didn't set this 1!!
1210[   20.234140] wcdcal_hwdep_ioctl_shared: codec didn't set this 3!!
1211[   20.429311] cp (548) used greatest stack depth: 5208 bytes left
1212[   20.584721] msm_qti_pp_get_rms_value_control, back not active to query rms be_idx:3
1213[   20.605221] msm_dolby_dap_param_to_get_control_get, port_id not set, do not query ADM
1214[   20.612987] msm_dolby_dap_param_visualizer_control_get Incorrect VCNB length
1215[   20.633333] msm_voice_sound_focus_get: Error getting Sound Focus Params, err=-22
1216[   20.640191] msm_voice_source_tracking_get: Error getting Source Tracking Params, err=-22
1217[   20.648943] msm_audio_get_copp_idx_from_port_id: Invalid FE, exiting
1218[   20.656649] msm_audio_sound_focus_get: Could not get copp idx for port_id=16385
1219[   20.673627] msm_audio_get_copp_idx_from_port_id: Invalid FE, exiting
1220[   20.678958] msm_audio_source_tracking_get: Could not get copp idx for port_id=16385
1221[   20.715806] msm_voice_sound_focus_get: Error getting Sound Focus Params, err=-22
1222[   20.722289] msm_voice_source_tracking_get: Error getting Source Tracking Params, err=-22
1223[   20.754746] msm_audio_get_copp_idx_from_port_id: Invalid FE, exiting
1224[   20.773615] msm_audio_sound_focus_get: Could not get copp idx for port_id=4101
1225[   20.779932] msm_audio_get_copp_idx_from_port_id: Invalid FE, exiting
1226[   20.793529] msm_audio_sound_focus_get: Could not get copp idx for port_id=4103
1227[   20.799834] msm_audio_get_copp_idx_from_port_id: Invalid FE, exiting
1228[   20.831346] msm_audio_source_tracking_get: Could not get copp idx for port_id=4103
1229[   20.853658] msm_audio_get_copp_idx_from_port_id: Invalid FE, exiting
1230[   20.858989] msm_audio_source_tracking_get: Could not get copp idx for port_id=4101
1231[   20.907106] msm_pcm_volume_ctl_get substream runtime not found
1232[   20.912186] msm_pcm_volume_ctl_get substream runtime not found
1233[   20.938501] msm_pcm_volume_ctl_get substream runtime not found
1234[   20.953839] msm_pcm_volume_ctl_get substream runtime not found
1235[   20.958747] msm_pcm_volume_ctl_get substream or runtime not found
1236[   20.970537] msm_pcm_volume_ctl_get substream runtime not found
1237[   21.028834] init: Service 'qcom-sh' (pid 395) exited with status 0
1238[   21.231827] init: Service 'RIDL' (pid 396) exited with status 65
1239[   21.545887] failed: s_ctrl   (null) for camera_id 1[   21.549569] MSM-SENSOR-INIT msm_sensor_driver_cmd:80 failed: msm_sensor_driver_probe rc -22
1240[   21.581312] msm_camera_fill_vreg_params:65 i 0 j 1 cam_vio
1241[   21.586158] msm_camera_fill_vreg_params:76 i 1 j 2 cam_vana
1242[   21.591409] msm_camera_fill_vreg_params:76 i 5 j 2 cam_vana
1243[   21.597083] msm_camera_fill_vreg_params:65 i 6 j 1 cam_vio
1244[   21.632191] i2c-msm-v2 78b7000.i2c: NACK: slave not responding, ensure its powered: msgs(n:2 cur:0 tx) bc(rx:2 tx:2) mode:FIFO slv_addr:0x20 MSTR_STS:0x0d1300c8 OPER:0x00000010
1245[   21.647046] msm_sensor_match_id: hi843_8909: read id failed
1246[   21.652466] msm_sensor_check_id:1336 match id failed rc -107
1247[   21.731428] i2c-msm-v2 78b7000.i2c: NACK: slave not responding, ensure its powered: msgs(n:2 cur:0 tx) bc(rx:2 tx:2) mode:FIFO slv_addr:0x20 MSTR_STS:0x0d1300c8 OPER:0x00000010
1248[   21.746257] msm_sensor_match_id: hi843_8909: read id failed
1249[   21.751892] msm_sensor_check_id:1336 match id failed rc -107
1250[   21.817990] configuring dma source while dma is active
1251[   21.832244] i2c-msm-v2 78b7000.i2c: NACK: slave not responding, ensure its powered: msgs(n:2 cur:0 tx) bc(rx:2 tx:2) mode:FIFO slv_addr:0x20 MSTR_STS:0x0d1300c8 OPER:0x00000010
1252[   21.847068] msm_sensor_match_id: hi843_8909: read id failed
1253[   21.852946] msm_sensor_check_id:1336 match id failed rc -107
1254[   21.903538] hi843_8909 power up failed
1255[   21.906288] MSM-SENSOR-INIT msm_sensor_driver_cmd:80 failed: msm_sensor_driver_probe rc -107
1256[   21.931609] msm_isp_close_node: halt timeout rc=0
1257[   22.231426] IPC_RTR: msm_ipc_router_send_to: permission failure for rild
1258[   22.237655] IPC_RTR: msm_ipc_router_sendmsg: Send_to failure -1
1259[   22.243639] IPC_RTR: msm_ipc_router_send_to: permission failure for rild
1260[   22.249691] IPC_RTR: msm_ipc_router_sendmsg: Send_to failure -1
1261[   22.703800] IPC_RTR: msm_ipc_router_send_to: permission failure for rild
1262[   22.709479] IPC_RTR: msm_ipc_router_sendmsg: Send_to failure -1
1263[   22.717024] IPC_RTR: msm_ipc_router_send_to: permission failure for rild
1264[   22.722700] IPC_RTR: msm_ipc_router_sendmsg: Send_to failure -1
1265[   22.876707] Couldn't get snoc_qosgen
1266[   23.033858] init: property_set("ro.ril.svlte1x", "false") failed
1267[   23.039613] init: property_set("ro.ril.svdo", "false") failed
1268[   23.409556] init: Service 'config_bluetooth' (pid 327) exited with status 0
1269[   23.685327] wcnss: no space available for smd frame
1270[   23.713898] wcnss: no space available for smd frame
1271[   23.751006] wcnss: no space available for smd frame
1272[   23.783550] wcnss: no space available for smd frame
1273[   23.813692] wcnss: no space available for smd frame
1274[   23.843559] wcnss: no space available for smd frame
1275[   39.101956] BootAnimation (716) used greatest stack depth: 5072 bytes left
1276[   39.165487] init: Service 'bootanim' (pid 545) exited with status 0
1277[   39.321483] init: Starting service 'qti-testscripts'...
1278[   39.337333] init: Starting service 'atfwd'...
1279[   39.343230] init: Starting service 'dmclient'...
1280[   39.374749] init: cannot find '/system/bin/qrngp' (No such file or directory), disabling 'qrngp'
1281[   39.383276] init: Service 'qti-testscripts' (pid 4093) exited with status 0
1282[   39.391973] init: Starting service 'exec 4 (/system/bin/bootstat)'...
1283[   39.394713] type=1400 audit(706.349:4): avc: denied { getattr } for pid=4100 comm="dmclient" path="/vendor" dev="rootfs" ino=7902 scontext=u:r:dmclient:s0 tcontext=u:object_r:rootfs:s0 tclass=lnk_file permissive=0
1284[   39.499062] init: Service 'exec 4 (/system/bin/bootstat)' (pid 4103) exited with status 0
1285[   39.507364] init: Starting service 'exec 5 (/system/bin/bootstat)'...
1286[   39.555133] init: Service 'exec 5 (/system/bin/bootstat)' (pid 4110) exited with status 0
1287[   39.564402] init: Starting service 'exec 6 (/system/bin/bootstat)'...
1288[   39.618521] init: Service 'exec 6 (/system/bin/bootstat)' (pid 4114) exited with status 0
1289[   39.628810] init: Starting service 'exec 7 (/system/bin/bootstat)'...
1290[   39.653734] core_ctl: module license 'BSD' taints kernel.
1291[   39.659468] Disabling lock debugging due to kernel taint
1292[   39.744661] init: Service 'exec 7 (/system/bin/bootstat)' (pid 4122) exited with status 0
1293[   40.525688] init: Starting service 'perfd'...
1294[   40.537909] init: Service 'qcom-post-boot' (pid 4091) exited with status 0
1295[   44.423064] type=1400 audit(711.379:5): avc: denied { read } for pid=4536 comm="RenderThread" name="gpuclk" dev="sysfs" ino=10917 scontext=u:r:untrusted_app:s0:c512,c768 tcontext=u:object_r:sysfs:s0 tclass=file permissive=0
1296[   45.089712] init: avc:  granted  { set } for property=net.lte.ims.data.enabled pid=3751 uid=1001 gid=1001 scontext=u:r:radio:s0 tcontext=u:object_r:net_radio_prop:s0 tclass=property_service
1297[   99.528314] type=1400 audit(766.489:6): avc: denied { read } for pid=4100 comm="dmclient" name="name" dev="sysfs" ino=10438 scontext=u:r:dmclient:s0 tcontext=u:object_r:sysfs:s0 tclass=file permissive=0
1298[   99.637114] type=1400 audit(766.599:7): avc: denied { search } for pid=4100 comm="dmclient" name="/" dev="mmcblk0p23" ino=2 scontext=u:r:dmclient:s0 tcontext=u:object_r:cache_file:s0 tclass=dir permissive=0
1299[  596.139190] mmc1: Re-init card rc = -123 (retries = 5)
1300[  596.206370] mmc1: Re-init card rc = -123 (retries = 4)
1301[  596.276841] mmc1: Re-init card rc = -123 (retries = 3)
1302[  596.346597] mmc1: Re-init card rc = -123 (retries = 2)
1303[  596.418000] mmc1: Re-init card rc = -123 (retries = 1)
1304[  596.483296] mmc1: error -123 during resume (card was removed?)
1305[  596.492044] mmc_sd_detect(mmc1): Unable to re-detect card (-123)
1306[  597.768393] FAT-fs (mmcblk1p1): unable to read boot sector to mark fs as dirty
1307[  854.357569] FAT-fs (mmcblk1p1): Volume was not properly unmounted. Some data may be corrupt. Please run fsck.
1308[ 1057.380326] mmc1: Re-init card rc = -123 (retries = 5)
1309[ 1057.454427] mmc1: Re-init card rc = -123 (retries = 4)
1310[ 1057.528456] mmc1: Re-init card rc = -123 (retries = 3)
1311[ 1057.597617] mmc1: Re-init card rc = -123 (retries = 2)
1312[ 1057.667238] mmc1: Re-init card rc = -123 (retries = 1)
1313[ 1057.732665] mmc1: error -123 during resume (card was removed?)