· 7 years ago · Oct 07, 2018, 10:58 AM
1[ 0.000000] Initializing cgroup subsys cpuset
2[ 0.000000] Linux version 3.3.4-gentoo (root@alpha) (gcc version 4.5.3 (Gentoo 4.5.3-r2 p1.1, pie-0.4.7) ) #1 SMP Fri Apr 27 20:38:40 PDT 2012
3[ 0.000000] Command line: real_root=/dev/sdb1 real_init=/sbin/init logo.nologo quiet fastboot rootfstype=ext4
4[ 0.000000] BIOS-provided physical RAM map:
5[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009b800 (usable)
6[ 0.000000] BIOS-e820: 000000000009b800 - 00000000000a0000 (reserved)
7[ 0.000000] BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
8[ 0.000000] BIOS-e820: 0000000000100000 - 00000000bfee0000 (usable)
9[ 0.000000] BIOS-e820: 00000000bfee0000 - 00000000bfee3000 (ACPI NVS)
10[ 0.000000] BIOS-e820: 00000000bfee3000 - 00000000bfef0000 (ACPI data)
11[ 0.000000] BIOS-e820: 00000000bfef0000 - 00000000bff00000 (reserved)
12[ 0.000000] BIOS-e820: 00000000f0000000 - 00000000f4000000 (reserved)
13[ 0.000000] BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved)
14[ 0.000000] NX (Execute Disable) protection: active
15[ 0.000000] DMI 2.4 present.
16[ 0.000000] DMI: Compaq-Presario FJ474AA-ABA SR5507F/Iris8, BIOS 5.27 06/10/2008
17[ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
18[ 0.000000] e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
19[ 0.000000] No AGP bridge found
20[ 0.000000] last_pfn = 0xbfee0 max_arch_pfn = 0x400000000
21[ 0.000000] MTRR default type: uncachable
22[ 0.000000] MTRR fixed ranges enabled:
23[ 0.000000] 00000-9FFFF write-back
24[ 0.000000] A0000-BFFFF uncachable
25[ 0.000000] C0000-C7FFF write-protect
26[ 0.000000] C8000-FFFFF uncachable
27[ 0.000000] MTRR variable ranges enabled:
28[ 0.000000] 0 base 0000000000 mask FF80000000 write-back
29[ 0.000000] 1 base 0080000000 mask FFC0000000 write-back
30[ 0.000000] 2 disabled
31[ 0.000000] 3 disabled
32[ 0.000000] 4 disabled
33[ 0.000000] 5 disabled
34[ 0.000000] 6 disabled
35[ 0.000000] 7 disabled
36[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
37[ 0.000000] found SMP MP-table at [ffff8800000f3e90] f3e90
38[ 0.000000] initial memory mapped : 0 - 20000000
39[ 0.000000] Base memory trampoline at [ffff880000099000] 99000 size 8192
40[ 0.000000] init_memory_mapping: 0000000000000000-00000000bfee0000
41[ 0.000000] 0000000000 - 00bfe00000 page 2M
42[ 0.000000] 00bfe00000 - 00bfee0000 page 4k
43[ 0.000000] kernel direct mapping tables up to bfee0000 @ 1fffb000-20000000
44[ 0.000000] RAMDISK: 37f2b000 - 37ff0000
45[ 0.000000] ACPI: RSDP 00000000000f7f00 00014 (v00 HPQOEM)
46[ 0.000000] ACPI: RSDT 00000000bfee3040 0003C (v01 HPQOEM SLIC-CPC 42302E31 NVDA 00000000)
47[ 0.000000] ACPI: FACP 00000000bfee30c0 00074 (v01 HPQOEM SLIC-CPC 42302E31 NVDA 00000000)
48[ 0.000000] ACPI Warning: Optional field Pm2ControlBlock has zero address or length: 0x0000000000000000/0x1 (20120111/tbfadt-579)
49[ 0.000000] ACPI: DSDT 00000000bfee3180 05B41 (v01 HPQOEM SLIC-CPC 00001000 MSFT 0100000E)
50[ 0.000000] ACPI: FACS 00000000bfee0000 00040
51[ 0.000000] ACPI: SSDT 00000000bfee8e00 00206 (v01 HPQOEM SLIC-CPC 00000001 LTP 00000001)
52[ 0.000000] ACPI: HPET 00000000bfee9080 00038 (v01 HPQOEM SLIC-CPC 42302E31 NVDA 00000098)
53[ 0.000000] ACPI: SLIC 00000000bfee9100 00176 (v01 HPQOEM SLIC-CPC 00000001 MSFT 00000001)
54[ 0.000000] ACPI: MCFG 00000000bfee92c0 0003C (v01 HPQOEM SLIC-CPC 42302E31 NVDA 00000000)
55[ 0.000000] ACPI: APIC 00000000bfee8d40 0007C (v01 HPQOEM SLIC-CPC 42302E31 NVDA 00000000)
56[ 0.000000] ACPI: Local APIC address 0xfee00000
57[ 0.000000] Scanning NUMA topology in Northbridge 24
58[ 0.000000] No NUMA configuration found
59[ 0.000000] Faking a node at 0000000000000000-00000000bfee0000
60[ 0.000000] Initmem setup node 0 0000000000000000-00000000bfee0000
61[ 0.000000] NODE_DATA [00000000bfedb000 - 00000000bfedffff]
62[ 0.000000] [ffffea0000000000-ffffea0002ffffff] PMD -> [ffff8800bc600000-ffff8800bf5fffff] on node 0
63[ 0.000000] Zone PFN ranges:
64[ 0.000000] DMA 0x00000010 -> 0x00001000
65[ 0.000000] DMA32 0x00001000 -> 0x00100000
66[ 0.000000] Normal empty
67[ 0.000000] Movable zone start PFN for each node
68[ 0.000000] Early memory PFN ranges
69[ 0.000000] 0: 0x00000010 -> 0x0000009b
70[ 0.000000] 0: 0x00000100 -> 0x000bfee0
71[ 0.000000] On node 0 totalpages: 786027
72[ 0.000000] DMA zone: 64 pages used for memmap
73[ 0.000000] DMA zone: 2 pages reserved
74[ 0.000000] DMA zone: 3913 pages, LIFO batch:0
75[ 0.000000] DMA32 zone: 12220 pages used for memmap
76[ 0.000000] DMA32 zone: 769828 pages, LIFO batch:31
77[ 0.000000] Detected use of extended apic ids on hypertransport bus
78[ 0.000000] ACPI: PM-Timer IO Port: 0x1008
79[ 0.000000] ACPI: Local APIC address 0xfee00000
80[ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
81[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
82[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
83[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
84[ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
85[ 0.000000] IOAPIC[0]: apic_id 2, version 17, address 0xfec00000, GSI 0-23
86[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
87[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
88[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 14 global_irq 14 high edge)
89[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 15 global_irq 15 high edge)
90[ 0.000000] ACPI: IRQ0 used by override.
91[ 0.000000] ACPI: IRQ2 used by override.
92[ 0.000000] ACPI: IRQ9 used by override.
93[ 0.000000] ACPI: IRQ14 used by override.
94[ 0.000000] ACPI: IRQ15 used by override.
95[ 0.000000] Using ACPI (MADT) for SMP configuration information
96[ 0.000000] ACPI: HPET id: 0x10de8201 base: 0xfeff0000
97[ 0.000000] SMP: Allowing 2 CPUs, 0 hotplug CPUs
98[ 0.000000] nr_irqs_gsi: 40
99[ 0.000000] Allocating PCI resources starting at bff00000 (gap: bff00000:30100000)
100[ 0.000000] setup_percpu: NR_CPUS:64 nr_cpumask_bits:64 nr_cpu_ids:2 nr_node_ids:1
101[ 0.000000] PERCPU: Embedded 26 pages/cpu @ffff8800bfc00000 s75712 r8192 d22592 u1048576
102[ 0.000000] pcpu-alloc: s75712 r8192 d22592 u1048576 alloc=1*2097152
103[ 0.000000] pcpu-alloc: [0] 0 1
104[ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 773741
105[ 0.000000] Policy zone: DMA32
106[ 0.000000] Kernel command line: real_root=/dev/sdb1 real_init=/sbin/init logo.nologo quiet fastboot rootfstype=ext4
107[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
108[ 0.000000] Checking aperture...
109[ 0.000000] No AGP bridge found
110[ 0.000000] Node 0: aperture @ 6b28000000 size 32 MB
111[ 0.000000] Aperture beyond 4GB. Ignoring.
112[ 0.000000] Memory: 3079348k/3144576k available (6493k kernel code, 468k absent, 64760k reserved, 6390k data, 544k init)
113[ 0.000000] SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
114[ 0.000000] Hierarchical RCU implementation.
115[ 0.000000] NR_IRQS:4352 nr_irqs:512 16
116[ 0.000000] spurious 8259A interrupt: IRQ7.
117[ 0.000000] Console: colour VGA+ 80x25
118[ 0.000000] console [tty0] enabled
119[ 0.000000] hpet clockevent registered
120[ 0.000000] Fast TSC calibration using PIT
121[ 0.000000] Detected 2109.597 MHz processor.
122[ 0.000000] Marking TSC unstable due to TSCs unsynchronized
123[ 0.001005] Calibrating delay loop (skipped), value calculated using timer frequency.. 4219.19 BogoMIPS (lpj=2109597)
124[ 0.001009] pid_max: default: 32768 minimum: 301
125[ 0.001039] Security Framework initialized
126[ 0.001045] SELinux: Initializing.
127[ 0.001055] SELinux: Starting in permissive mode
128[ 0.001478] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
129[ 0.005241] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
130[ 0.006737] Mount-cache hash table entries: 256
131[ 0.006940] Initializing cgroup subsys cpuacct
132[ 0.006943] Initializing cgroup subsys freezer
133[ 0.006976] tseg: 00bff00000
134[ 0.006978] CPU: Physical Processor ID: 0
135[ 0.006980] CPU: Processor Core ID: 0
136[ 0.006983] mce: CPU supports 5 MCE banks
137[ 0.007014] using AMD E400 aware idle routine
138[ 0.007061] ACPI: Core revision 20120111
139[ 0.010614] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
140[ 0.020679] CPU0: AMD Athlon(tm) Dual Core Processor 4050e stepping 02
141[ 0.020998] Performance Events: AMD PMU driver.
142[ 0.020998] ... version: 0
143[ 0.020998] ... bit width: 48
144[ 0.020998] ... generic registers: 4
145[ 0.020998] ... value mask: 0000ffffffffffff
146[ 0.020998] ... max period: 00007fffffffffff
147[ 0.020998] ... fixed-purpose events: 0
148[ 0.020998] ... event mask: 000000000000000f
149[ 0.020998] MCE: In-kernel MCE decoding enabled.
150[ 0.020998] Booting Node 0, Processors #1 Ok.
151[ 0.020998] smpboot cpu 1: start_ip = 99000
152[ 0.091111] Brought up 2 CPUs
153[ 0.091113] Total of 2 processors activated (8438.09 BogoMIPS).
154[ 0.091695] devtmpfs: initialized
155[ 0.092119] NET: Registered protocol family 16
156[ 0.092148] kworker/u:0 used greatest stack depth: 5480 bytes left
157[ 0.092148] node 0 link 0: io port [9000, ffff]
158[ 0.092148] TOM: 00000000c0000000 aka 3072M
159[ 0.092148] node 0 link 0: mmio [a0000, bffff]
160[ 0.092148] node 0 link 0: mmio [c0000000, efffffff]
161[ 0.092148] node 0 link 0: mmio [f4000000, fe02ffff]
162[ 0.092148] node 0 link 0: mmio [f0000000, f03fffff]
163[ 0.092148] bus: [00, 04] on node 0 link 0
164[ 0.092148] bus: 00 index 0 [io 0x0000-0xffff]
165[ 0.092148] bus: 00 index 1 [mem 0x000a0000-0x000bffff]
166[ 0.092148] bus: 00 index 2 [mem 0xc0000000-0xf3ffffff]
167[ 0.092148] bus: 00 index 3 [mem 0xf4000000-0xfcffffffff]
168[ 0.092148] ACPI: bus type pci registered
169[ 0.093028] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf0000000-0xf3ffffff] (base 0xf0000000)
170[ 0.093033] PCI: MMCONFIG at [mem 0xf0000000-0xf3ffffff] reserved in E820
171[ 0.097964] PCI: Using configuration type 1 for base access
172[ 0.110031] bio: create slab <bio-0> at 0
173[ 0.110066] ACPI: Added _OSI(Module Device)
174[ 0.110066] ACPI: Added _OSI(Processor Device)
175[ 0.110066] ACPI: Added _OSI(3.0 _SCP Extensions)
176[ 0.110066] ACPI: Added _OSI(Processor Aggregator Device)
177[ 0.111236] ACPI: EC: Look up EC in DSDT
178[ 0.114711] ACPI: Interpreter enabled
179[ 0.114713] ACPI: (supports S0 S5)
180[ 0.114725] ACPI: Using IOAPIC for interrupt routing
181[ 0.124125] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
182[ 0.125137] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-04])
183[ 0.126318] pci_root PNP0A08:00: host bridge window [io 0x0000-0x03af]
184[ 0.126321] pci_root PNP0A08:00: host bridge window [io 0x03e0-0x0cf7]
185[ 0.126324] pci_root PNP0A08:00: host bridge window [io 0x9000-0xffff]
186[ 0.126326] pci_root PNP0A08:00: host bridge window [io 0x03b0-0x03df]
187[ 0.126329] pci_root PNP0A08:00: host bridge window [mem 0x000a0000-0x000bffff]
188[ 0.126332] pci_root PNP0A08:00: host bridge window [mem 0xc0000000-0xefffffff]
189[ 0.126334] pci_root PNP0A08:00: host bridge window [mem 0xf4000000-0xfe02ffff]
190[ 0.126337] pci_root PNP0A08:00: host bridge window [mem 0xfed40000-0xfed44fff]
191[ 0.126339] pci_root PNP0A08:00: host bridge window [io 0x4700-0x470b]
192[ 0.126342] pci_root PNP0A08:00: host bridge window [io 0x1c00-0x1c80]
193[ 0.126345] pci_root PNP0A08:00: host bridge window [mem 0xfec80000-0xfecbffff]
194[ 0.126391] PCI host bridge to bus 0000:00
195[ 0.126391] pci_bus 0000:00: root bus resource [io 0x0000-0x03af]
196[ 0.126391] pci_bus 0000:00: root bus resource [io 0x03e0-0x0cf7]
197[ 0.126391] pci_bus 0000:00: root bus resource [io 0x9000-0xffff]
198[ 0.126391] pci_bus 0000:00: root bus resource [io 0x03b0-0x03df]
199[ 0.126391] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
200[ 0.126391] pci_bus 0000:00: root bus resource [mem 0xc0000000-0xefffffff]
201[ 0.126391] pci_bus 0000:00: root bus resource [mem 0xf4000000-0xfe02ffff]
202[ 0.126391] pci_bus 0000:00: root bus resource [mem 0xfed40000-0xfed44fff]
203[ 0.126391] pci_bus 0000:00: root bus resource [io 0x4700-0x470b]
204[ 0.126391] pci_bus 0000:00: root bus resource [io 0x1c00-0x1c80]
205[ 0.126391] pci_bus 0000:00: root bus resource [mem 0xfec80000-0xfecbffff]
206[ 0.126391] pci 0000:00:00.0: [10de:03ea] type 0 class 0x000500
207[ 0.126391] pci 0000:00:01.0: [10de:03e0] type 0 class 0x000601
208[ 0.126391] pci 0000:00:01.1: [10de:03eb] type 0 class 0x000c05
209[ 0.126391] pci 0000:00:01.1: reg 10: [io 0xfc00-0xfc3f]
210[ 0.126391] pci 0000:00:01.1: reg 20: [io 0x1c00-0x1c3f]
211[ 0.126391] pci 0000:00:01.1: reg 24: [io 0xf400-0xf43f]
212[ 0.126391] pci 0000:00:01.1: PME# supported from D3hot D3cold
213[ 0.126391] pci 0000:00:01.2: [10de:03f5] type 0 class 0x000500
214[ 0.126401] pci 0000:00:02.0: [10de:03f1] type 0 class 0x000c03
215[ 0.126410] pci 0000:00:02.0: reg 10: [mem 0xfe02f000-0xfe02ffff]
216[ 0.126443] pci 0000:00:02.0: supports D1 D2
217[ 0.126445] pci 0000:00:02.0: PME# supported from D0 D1 D2 D3hot D3cold
218[ 0.126458] pci 0000:00:02.1: [10de:03f2] type 0 class 0x000c03
219[ 0.126469] pci 0000:00:02.1: reg 10: [mem 0xfe02e000-0xfe02e0ff]
220[ 0.126509] pci 0000:00:02.1: supports D1 D2
221[ 0.126511] pci 0000:00:02.1: PME# supported from D0 D1 D2 D3hot D3cold
222[ 0.126530] pci 0000:00:04.0: [10de:03f3] type 1 class 0x000604
223[ 0.126570] pci 0000:00:05.0: [10de:03f0] type 0 class 0x000403
224[ 0.127007] pci 0000:00:05.0: reg 10: [mem 0xfe028000-0xfe02bfff]
225[ 0.127048] pci 0000:00:05.0: PME# supported from D3hot D3cold
226[ 0.127068] pci 0000:00:06.0: [10de:03ec] type 0 class 0x000101
227[ 0.127089] pci 0000:00:06.0: reg 20: [io 0xf000-0xf00f]
228[ 0.127119] pci 0000:00:07.0: [10de:03ef] type 0 class 0x000680
229[ 0.127129] pci 0000:00:07.0: reg 10: [mem 0xfe02d000-0xfe02dfff]
230[ 0.127134] pci 0000:00:07.0: reg 14: [io 0xec00-0xec07]
231[ 0.127168] pci 0000:00:07.0: supports D1 D2
232[ 0.127170] pci 0000:00:07.0: PME# supported from D0 D1 D2 D3hot D3cold
233[ 0.127185] pci 0000:00:08.0: [10de:03f6] type 0 class 0x000101
234[ 0.127194] pci 0000:00:08.0: reg 10: [io 0x09f0-0x09f7]
235[ 0.127198] pci 0000:00:08.0: reg 14: [io 0x0bf0-0x0bf3]
236[ 0.127203] pci 0000:00:08.0: reg 18: [io 0x0970-0x0977]
237[ 0.127207] pci 0000:00:08.0: reg 1c: [io 0x0b70-0x0b73]
238[ 0.127212] pci 0000:00:08.0: reg 20: [io 0xd800-0xd80f]
239[ 0.127217] pci 0000:00:08.0: reg 24: [mem 0xfe02c000-0xfe02cfff]
240[ 0.127251] pci 0000:00:09.0: [10de:03e8] type 1 class 0x000604
241[ 0.127277] pci 0000:00:09.0: PME# supported from D0 D1 D2 D3hot D3cold
242[ 0.127293] pci 0000:00:0b.0: [10de:03e9] type 1 class 0x000604
243[ 0.127318] pci 0000:00:0b.0: PME# supported from D0 D1 D2 D3hot D3cold
244[ 0.127332] pci 0000:00:0c.0: [10de:03e9] type 1 class 0x000604
245[ 0.127357] pci 0000:00:0c.0: PME# supported from D0 D1 D2 D3hot D3cold
246[ 0.127377] pci 0000:00:18.0: [1022:1100] type 0 class 0x000600
247[ 0.127395] pci 0000:00:18.1: [1022:1101] type 0 class 0x000600
248[ 0.127410] pci 0000:00:18.2: [1022:1102] type 0 class 0x000600
249[ 0.127428] pci 0000:00:18.3: [1022:1103] type 0 class 0x000600
250[ 0.127476] pci 0000:01:05.0: [14f1:2f20] type 0 class 0x000780
251[ 0.127489] pci 0000:01:05.0: reg 10: [mem 0xfdef0000-0xfdefffff]
252[ 0.127496] pci 0000:01:05.0: reg 14: [io 0xcc00-0xcc07]
253[ 0.127540] pci 0000:01:05.0: PME# supported from D3hot D3cold
254[ 0.127569] pci 0000:00:04.0: PCI bridge to [bus 01-01] (subtractive decode)
255[ 0.127573] pci 0000:00:04.0: bridge window [io 0xc000-0xcfff]
256[ 0.127577] pci 0000:00:04.0: bridge window [mem 0xfde00000-0xfdefffff]
257[ 0.127581] pci 0000:00:04.0: bridge window [mem 0xfdf00000-0xfdffffff pref]
258[ 0.127584] pci 0000:00:04.0: bridge window [io 0x0000-0x03af] (subtractive decode)
259[ 0.127586] pci 0000:00:04.0: bridge window [io 0x03e0-0x0cf7] (subtractive decode)
260[ 0.127589] pci 0000:00:04.0: bridge window [io 0x9000-0xffff] (subtractive decode)
261[ 0.127592] pci 0000:00:04.0: bridge window [io 0x03b0-0x03df] (subtractive decode)
262[ 0.127595] pci 0000:00:04.0: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
263[ 0.127598] pci 0000:00:04.0: bridge window [mem 0xc0000000-0xefffffff] (subtractive decode)
264[ 0.127601] pci 0000:00:04.0: bridge window [mem 0xf4000000-0xfe02ffff] (subtractive decode)
265[ 0.127604] pci 0000:00:04.0: bridge window [mem 0xfed40000-0xfed44fff] (subtractive decode)
266[ 0.127607] pci 0000:00:04.0: bridge window [io 0x4700-0x470b] (subtractive decode)
267[ 0.127610] pci 0000:00:04.0: bridge window [io 0x1c00-0x1c80] (subtractive decode)
268[ 0.127613] pci 0000:00:04.0: bridge window [mem 0xfec80000-0xfecbffff] (subtractive decode)
269[ 0.127643] pci 0000:02:00.0: [10de:1040] type 0 class 0x000300
270[ 0.127651] pci 0000:02:00.0: reg 10: [mem 0xfb000000-0xfbffffff]
271[ 0.127660] pci 0000:02:00.0: reg 14: [mem 0xd8000000-0xdfffffff 64bit pref]
272[ 0.127669] pci 0000:02:00.0: reg 1c: [mem 0xe6000000-0xe7ffffff 64bit pref]
273[ 0.127676] pci 0000:02:00.0: reg 24: [io 0xbc00-0xbc7f]
274[ 0.127682] pci 0000:02:00.0: reg 30: [mem 0x00000000-0x0007ffff pref]
275[ 0.127726] pci 0000:02:00.1: [10de:0e08] type 0 class 0x000403
276[ 0.127734] pci 0000:02:00.1: reg 10: [mem 0xfcffc000-0xfcffffff]
277[ 0.129039] pci 0000:00:09.0: PCI bridge to [bus 02-02]
278[ 0.129043] pci 0000:00:09.0: bridge window [io 0xb000-0xbfff]
279[ 0.129046] pci 0000:00:09.0: bridge window [mem 0xfb000000-0xfcffffff]
280[ 0.129050] pci 0000:00:09.0: bridge window [mem 0xd8000000-0xe7ffffff 64bit pref]
281[ 0.129071] pci 0000:00:0b.0: PCI bridge to [bus 03-03]
282[ 0.129075] pci 0000:00:0b.0: bridge window [io 0xa000-0xafff]
283[ 0.129078] pci 0000:00:0b.0: bridge window [mem 0xfdd00000-0xfddfffff]
284[ 0.129082] pci 0000:00:0b.0: bridge window [mem 0xfdc00000-0xfdcfffff 64bit pref]
285[ 0.129103] pci 0000:00:0c.0: PCI bridge to [bus 04-04]
286[ 0.129107] pci 0000:00:0c.0: bridge window [io 0x9000-0x9fff]
287[ 0.129110] pci 0000:00:0c.0: bridge window [mem 0xfdb00000-0xfdbfffff]
288[ 0.129114] pci 0000:00:0c.0: bridge window [mem 0xfda00000-0xfdafffff 64bit pref]
289[ 0.129125] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
290[ 0.129259] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HUB0._PRT]
291[ 0.129398] pci0000:00: Requesting ACPI _OSC control (0x1d)
292[ 0.129402] pci0000:00: ACPI _OSC request failed (AE_NOT_FOUND), returned control mask: 0x1d
293[ 0.129404] ACPI _OSC control for PCIe not granted, disabling ASPM
294[ 0.150073] ACPI: PCI Interrupt Link [LNK1] (IRQs *5 7 9 10 11 14 15)
295[ 0.150127] ACPI: PCI Interrupt Link [LNK2] (IRQs 5 7 9 10 11 14 15) *0, disabled.
296[ 0.150176] ACPI: PCI Interrupt Link [LNK3] (IRQs 5 7 9 10 11 14 15) *0, disabled.
297[ 0.150226] ACPI: PCI Interrupt Link [LNK4] (IRQs 5 7 9 10 11 14 15) *0, disabled.
298[ 0.150281] ACPI: PCI Interrupt Link [LNK5] (IRQs *5 7 9 10 11 14 15)
299[ 0.150330] ACPI: PCI Interrupt Link [LNK6] (IRQs 5 7 9 10 11 14 15) *0, disabled.
300[ 0.150380] ACPI: PCI Interrupt Link [LNK7] (IRQs 5 7 9 10 11 14 15) *0, disabled.
301[ 0.150431] ACPI: PCI Interrupt Link [LNK8] (IRQs 5 7 9 *10 11 14 15)
302[ 0.150481] ACPI: PCI Interrupt Link [LIGP] (IRQs 5 7 9 10 11 14 15) *0, disabled.
303[ 0.150530] ACPI: PCI Interrupt Link [LP2P] (IRQs 5 7 9 10 11 14 15) *0, disabled.
304[ 0.150580] ACPI: PCI Interrupt Link [LUBA] (IRQs 5 7 9 *10 11 14 15)
305[ 0.150631] ACPI: PCI Interrupt Link [LMAC] (IRQs 5 7 9 *10 11 14 15)
306[ 0.150692] ACPI: PCI Interrupt Link [LAZA] (IRQs 5 7 9 10 *11 14 15)
307[ 0.151047] ACPI: PCI Interrupt Link [LPMU] (IRQs 5 7 9 10 11 14 15) *0, disabled.
308[ 0.151099] ACPI: PCI Interrupt Link [LSMB] (IRQs *5 7 9 10 11 14 15)
309[ 0.151156] ACPI: PCI Interrupt Link [LUB2] (IRQs 5 7 9 10 *11 14 15)
310[ 0.151205] ACPI: PCI Interrupt Link [LIDE] (IRQs 5 7 9 10 11 14 15) *0, disabled.
311[ 0.151256] ACPI: PCI Interrupt Link [LSID] (IRQs 5 7 9 10 *11 14 15)
312[ 0.151314] ACPI: PCI Interrupt Link [LFID] (IRQs 5 7 9 10 11 14 15) *0, disabled.
313[ 0.151417] ACPI: PCI Interrupt Link [APC1] (IRQs 16) *0
314[ 0.151506] ACPI: PCI Interrupt Link [APC2] (IRQs 17) *0, disabled.
315[ 0.151595] ACPI: PCI Interrupt Link [APC3] (IRQs 18) *0, disabled.
316[ 0.151689] ACPI: PCI Interrupt Link [APC4] (IRQs 19) *0, disabled.
317[ 0.151778] ACPI: PCI Interrupt Link [APC5] (IRQs 16) *0
318[ 0.151865] ACPI: PCI Interrupt Link [APC6] (IRQs 16) *0, disabled.
319[ 0.151954] ACPI: PCI Interrupt Link [APC7] (IRQs 16) *0, disabled.
320[ 0.152046] ACPI: PCI Interrupt Link [APC8] (IRQs 16) *0
321[ 0.152134] ACPI: PCI Interrupt Link [AIGP] (IRQs 20 21 22) *0, disabled.
322[ 0.152223] ACPI: PCI Interrupt Link [APCF] (IRQs 20 21 22) *0
323[ 0.152312] ACPI: PCI Interrupt Link [APCH] (IRQs 20 21 22) *0
324[ 0.152401] ACPI: PCI Interrupt Link [APMU] (IRQs 20 21 22) *0, disabled.
325[ 0.152490] ACPI: PCI Interrupt Link [AAZA] (IRQs 20 21 22) *0
326[ 0.152582] ACPI: PCI Interrupt Link [APCS] (IRQs 20 21 22) *0
327[ 0.152670] ACPI: PCI Interrupt Link [APCL] (IRQs 20 21 22) *0
328[ 0.152759] ACPI: PCI Interrupt Link [APCM] (IRQs 20 21 22) *0, disabled.
329[ 0.152849] ACPI: PCI Interrupt Link [APCZ] (IRQs 20 21 22) *0, disabled.
330[ 0.152938] ACPI: PCI Interrupt Link [APSI] (IRQs 23) *0
331[ 0.153031] ACPI: PCI Interrupt Link [APSJ] (IRQs 23) *0, disabled.
332[ 0.153067] vgaarb: device added: PCI:0000:02:00.0,decodes=io+mem,owns=io+mem,locks=none
333[ 0.153067] vgaarb: loaded
334[ 0.153067] vgaarb: bridge control possible 0000:02:00.0
335[ 0.153149] SCSI subsystem initialized
336[ 0.153149] libata version 3.00 loaded.
337[ 0.153990] usbcore: registered new interface driver usbfs
338[ 0.154027] usbcore: registered new interface driver hub
339[ 0.154041] usbcore: registered new device driver usb
340[ 0.154041] Advanced Linux Sound Architecture Driver Version 1.0.24.
341[ 0.154041] PCI: Using ACPI for IRQ routing
342[ 0.155940] PCI: pci_cache_line_size set to 64 bytes
343[ 0.156040] reserve RAM buffer: 000000000009b800 - 000000000009ffff
344[ 0.156043] reserve RAM buffer: 00000000bfee0000 - 00000000bfffffff
345[ 0.156094] NetLabel: Initializing
346[ 0.156096] NetLabel: domain hash size = 128
347[ 0.156098] NetLabel: protocols = UNLABELED CIPSOv4
348[ 0.156114] NetLabel: unlabeled traffic allowed by default
349[ 0.156134] cfg80211: Calling CRDA to update world regulatory domain
350[ 0.156152] HPET: 3 timers in total, 0 timers will be used for per-cpu timer
351[ 0.156152] hpet0: at MMIO 0xfeff0000, IRQs 2, 8, 31
352[ 0.156152] hpet0: 3 comparators, 32-bit 25.000000 MHz counter
353[ 0.159031] Switching to clocksource hpet
354[ 0.163813] FS-Cache: Loaded
355[ 0.163971] CacheFiles: Loaded
356[ 0.170785] pnp: PnP ACPI init
357[ 0.170798] ACPI: bus type pnp registered
358[ 0.171541] pnp 00:00: [bus 00-04]
359[ 0.171544] pnp 00:00: [io 0x0cf8-0x0cff]
360[ 0.171546] pnp 00:00: [io 0x0000-0x03af window]
361[ 0.171549] pnp 00:00: [io 0x03e0-0x0cf7 window]
362[ 0.171551] pnp 00:00: [io 0x9000-0xffff window]
363[ 0.171553] pnp 00:00: [io 0x03b0-0x03df window]
364[ 0.171556] pnp 00:00: [mem 0x000a0000-0x000bffff window]
365[ 0.171559] pnp 00:00: [mem 0xc0000000-0xefffffff window]
366[ 0.171562] pnp 00:00: [mem 0xf4000000-0xfe02ffff window]
367[ 0.171565] pnp 00:00: [mem 0xfed40000-0xfed44fff window]
368[ 0.171567] pnp 00:00: [io 0x4700-0x470b window]
369[ 0.171570] pnp 00:00: [io 0x1c00-0x1c80 window]
370[ 0.171573] pnp 00:00: [mem 0xfec80000-0xfecbffff window]
371[ 0.171715] pnp 00:00: Plug and Play ACPI device, IDs PNP0a08 PNP0a03 (active)
372[ 0.171828] pnp 00:01: [io 0x1000-0x107f]
373[ 0.171831] pnp 00:01: [io 0x1080-0x10ff]
374[ 0.171834] pnp 00:01: [io 0x1400-0x147f]
375[ 0.171836] pnp 00:01: [io 0x1480-0x14ff]
376[ 0.171838] pnp 00:01: [io 0x1800-0x187f]
377[ 0.171840] pnp 00:01: [io 0x1880-0x18ff]
378[ 0.171843] pnp 00:01: [mem 0x00000000-0xffffffffffffffff disabled]
379[ 0.171846] pnp 00:01: [mem 0xfefe0000-0xfefe01ff]
380[ 0.171848] pnp 00:01: [mem 0xfefe1000-0xfefe10ff]
381[ 0.171851] pnp 00:01: [mem 0x00000000-0xffffffffffffffff disabled]
382[ 0.171853] pnp 00:01: [io 0x2000-0x207f]
383[ 0.171855] pnp 00:01: [io 0x2080-0x20ff]
384[ 0.171984] system 00:01: [io 0x1000-0x107f] has been reserved
385[ 0.171987] system 00:01: [io 0x1080-0x10ff] has been reserved
386[ 0.171990] system 00:01: [io 0x1400-0x147f] has been reserved
387[ 0.171993] system 00:01: [io 0x1480-0x14ff] has been reserved
388[ 0.171996] system 00:01: [io 0x1800-0x187f] has been reserved
389[ 0.171999] system 00:01: [io 0x1880-0x18ff] has been reserved
390[ 0.172059] system 00:01: [io 0x2000-0x207f] has been reserved
391[ 0.172062] system 00:01: [io 0x2080-0x20ff] has been reserved
392[ 0.172066] system 00:01: [mem 0xfefe0000-0xfefe01ff] has been reserved
393[ 0.172069] system 00:01: [mem 0xfefe1000-0xfefe10ff] has been reserved
394[ 0.172073] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
395[ 0.172149] pnp 00:02: [io 0x0010-0x001f]
396[ 0.172151] pnp 00:02: [io 0x0022-0x003f]
397[ 0.172154] pnp 00:02: [io 0x0044-0x004d]
398[ 0.172160] pnp 00:02: [io 0x0050-0x005e]
399[ 0.172162] pnp 00:02: [io 0x0062-0x0063]
400[ 0.172164] pnp 00:02: [io 0x0065-0x006f]
401[ 0.172166] pnp 00:02: [io 0x0074-0x007f]
402[ 0.172169] pnp 00:02: [io 0x0091-0x0093]
403[ 0.172171] pnp 00:02: [io 0x00a2-0x00bf]
404[ 0.172173] pnp 00:02: [io 0x00e0-0x00ef]
405[ 0.172176] pnp 00:02: [io 0x04d0-0x04d1]
406[ 0.172178] pnp 00:02: [io 0x0800-0x087f]
407[ 0.172180] pnp 00:02: [io 0x0290-0x0297]
408[ 0.172293] system 00:02: [io 0x04d0-0x04d1] has been reserved
409[ 0.172296] system 00:02: [io 0x0800-0x087f] has been reserved
410[ 0.172299] system 00:02: [io 0x0290-0x0297] has been reserved
411[ 0.172303] system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active)
412[ 0.172318] pnp 00:03: [dma 4]
413[ 0.172320] pnp 00:03: [io 0x0000-0x000f]
414[ 0.172322] pnp 00:03: [io 0x0080-0x0090]
415[ 0.172325] pnp 00:03: [io 0x0094-0x009f]
416[ 0.172327] pnp 00:03: [io 0x00c0-0x00df]
417[ 0.172401] pnp 00:03: Plug and Play ACPI device, IDs PNP0200 (active)
418[ 0.172459] pnp 00:04: [irq 0 disabled]
419[ 0.172476] pnp 00:04: [irq 8]
420[ 0.172479] pnp 00:04: [mem 0xfeff0000-0xfeff03ff]
421[ 0.172556] pnp 00:04: Plug and Play ACPI device, IDs PNP0103 (active)
422[ 0.172590] pnp 00:05: [io 0x0070-0x0073]
423[ 0.172676] pnp 00:05: Plug and Play ACPI device, IDs PNP0b00 (active)
424[ 0.172688] pnp 00:06: [io 0x0061]
425[ 0.172768] pnp 00:06: Plug and Play ACPI device, IDs PNP0800 (active)
426[ 0.172780] pnp 00:07: [io 0x00f0-0x00ff]
427[ 0.172789] pnp 00:07: [irq 13]
428[ 0.172869] pnp 00:07: Plug and Play ACPI device, IDs PNP0c04 (active)
429[ 0.173179] pnp 00:08: [io 0x0060]
430[ 0.173182] pnp 00:08: [io 0x0064]
431[ 0.173191] pnp 00:08: [irq 1]
432[ 0.173287] pnp 00:08: Plug and Play ACPI device, IDs PNP0303 PNP030b (active)
433[ 0.173991] pnp 00:09: [mem 0xf0000000-0xf3ffffff]
434[ 0.174134] system 00:09: [mem 0xf0000000-0xf3ffffff] has been reserved
435[ 0.174138] system 00:09: Plug and Play ACPI device, IDs PNP0c02 (active)
436[ 0.174232] pnp 00:0a: [mem 0x000f0000-0x000fffff]
437[ 0.174234] pnp 00:0a: [mem 0xfeff0000-0xfeff00ff]
438[ 0.174237] pnp 00:0a: [mem 0xbfee0000-0xbfefffff]
439[ 0.174239] pnp 00:0a: [mem 0xffff0000-0xffffffff]
440[ 0.174242] pnp 00:0a: [mem 0x00000000-0x0009ffff]
441[ 0.174244] pnp 00:0a: [mem 0x00100000-0xbfedffff]
442[ 0.174247] pnp 00:0a: [mem 0x00000000-0xffffffffffffffff disabled]
443[ 0.174249] pnp 00:0a: [mem 0xfec00000-0xfec00fff]
444[ 0.174252] pnp 00:0a: [mem 0xfee00000-0xfeefffff]
445[ 0.174254] pnp 00:0a: [mem 0xfefff000-0xfeffffff]
446[ 0.174256] pnp 00:0a: [mem 0xfff80000-0xfff80fff]
447[ 0.174259] pnp 00:0a: [mem 0xfff90000-0xfffbffff]
448[ 0.174261] pnp 00:0a: [mem 0xfffed000-0xfffeffff]
449[ 0.174386] system 00:0a: [mem 0x000f0000-0x000fffff] could not be reserved
450[ 0.174390] system 00:0a: [mem 0xfeff0000-0xfeff00ff] has been reserved
451[ 0.174393] system 00:0a: [mem 0xbfee0000-0xbfefffff] could not be reserved
452[ 0.174396] system 00:0a: [mem 0xffff0000-0xffffffff] has been reserved
453[ 0.174399] system 00:0a: [mem 0x00000000-0x0009ffff] could not be reserved
454[ 0.174403] system 00:0a: [mem 0x00100000-0xbfedffff] could not be reserved
455[ 0.174406] system 00:0a: [mem 0xfec00000-0xfec00fff] could not be reserved
456[ 0.174409] system 00:0a: [mem 0xfee00000-0xfeefffff] has been reserved
457[ 0.174412] system 00:0a: [mem 0xfefff000-0xfeffffff] has been reserved
458[ 0.174415] system 00:0a: [mem 0xfff80000-0xfff80fff] has been reserved
459[ 0.174418] system 00:0a: [mem 0xfff90000-0xfffbffff] has been reserved
460[ 0.174421] system 00:0a: [mem 0xfffed000-0xfffeffff] has been reserved
461[ 0.174425] system 00:0a: Plug and Play ACPI device, IDs PNP0c01 (active)
462[ 0.174450] pnp: PnP ACPI: found 11 devices
463[ 0.174453] ACPI: ACPI bus type pnp unregistered
464[ 0.179130] PCI: max bus depth: 1 pci_try_num: 2
465[ 0.179150] pci 0000:00:04.0: PCI bridge to [bus 01-01]
466[ 0.179153] pci 0000:00:04.0: bridge window [io 0xc000-0xcfff]
467[ 0.179157] pci 0000:00:04.0: bridge window [mem 0xfde00000-0xfdefffff]
468[ 0.179161] pci 0000:00:04.0: bridge window [mem 0xfdf00000-0xfdffffff pref]
469[ 0.179170] pci 0000:02:00.0: BAR 6: assigned [mem 0xe0000000-0xe007ffff pref]
470[ 0.179173] pci 0000:00:09.0: PCI bridge to [bus 02-02]
471[ 0.179176] pci 0000:00:09.0: bridge window [io 0xb000-0xbfff]
472[ 0.179179] pci 0000:00:09.0: bridge window [mem 0xfb000000-0xfcffffff]
473[ 0.179183] pci 0000:00:09.0: bridge window [mem 0xd8000000-0xe7ffffff 64bit pref]
474[ 0.179187] pci 0000:00:0b.0: PCI bridge to [bus 03-03]
475[ 0.179189] pci 0000:00:0b.0: bridge window [io 0xa000-0xafff]
476[ 0.179193] pci 0000:00:0b.0: bridge window [mem 0xfdd00000-0xfddfffff]
477[ 0.179196] pci 0000:00:0b.0: bridge window [mem 0xfdc00000-0xfdcfffff 64bit pref]
478[ 0.179200] pci 0000:00:0c.0: PCI bridge to [bus 04-04]
479[ 0.179202] pci 0000:00:0c.0: bridge window [io 0x9000-0x9fff]
480[ 0.179206] pci 0000:00:0c.0: bridge window [mem 0xfdb00000-0xfdbfffff]
481[ 0.179209] pci 0000:00:0c.0: bridge window [mem 0xfda00000-0xfdafffff 64bit pref]
482[ 0.179218] pci 0000:00:04.0: setting latency timer to 64
483[ 0.179228] pci_bus 0000:00: resource 4 [io 0x0000-0x03af]
484[ 0.179230] pci_bus 0000:00: resource 5 [io 0x03e0-0x0cf7]
485[ 0.179233] pci_bus 0000:00: resource 6 [io 0x9000-0xffff]
486[ 0.179235] pci_bus 0000:00: resource 7 [io 0x03b0-0x03df]
487[ 0.179238] pci_bus 0000:00: resource 8 [mem 0x000a0000-0x000bffff]
488[ 0.179241] pci_bus 0000:00: resource 9 [mem 0xc0000000-0xefffffff]
489[ 0.179243] pci_bus 0000:00: resource 10 [mem 0xf4000000-0xfe02ffff]
490[ 0.179246] pci_bus 0000:00: resource 11 [mem 0xfed40000-0xfed44fff]
491[ 0.179249] pci_bus 0000:00: resource 12 [io 0x4700-0x470b]
492[ 0.179252] pci_bus 0000:00: resource 13 [io 0x1c00-0x1c80]
493[ 0.179254] pci_bus 0000:00: resource 14 [mem 0xfec80000-0xfecbffff]
494[ 0.179257] pci_bus 0000:01: resource 0 [io 0xc000-0xcfff]
495[ 0.179260] pci_bus 0000:01: resource 1 [mem 0xfde00000-0xfdefffff]
496[ 0.179263] pci_bus 0000:01: resource 2 [mem 0xfdf00000-0xfdffffff pref]
497[ 0.179265] pci_bus 0000:01: resource 4 [io 0x0000-0x03af]
498[ 0.179268] pci_bus 0000:01: resource 5 [io 0x03e0-0x0cf7]
499[ 0.179270] pci_bus 0000:01: resource 6 [io 0x9000-0xffff]
500[ 0.179273] pci_bus 0000:01: resource 7 [io 0x03b0-0x03df]
501[ 0.179275] pci_bus 0000:01: resource 8 [mem 0x000a0000-0x000bffff]
502[ 0.179278] pci_bus 0000:01: resource 9 [mem 0xc0000000-0xefffffff]
503[ 0.179281] pci_bus 0000:01: resource 10 [mem 0xf4000000-0xfe02ffff]
504[ 0.179283] pci_bus 0000:01: resource 11 [mem 0xfed40000-0xfed44fff]
505[ 0.179286] pci_bus 0000:01: resource 12 [io 0x4700-0x470b]
506[ 0.179289] pci_bus 0000:01: resource 13 [io 0x1c00-0x1c80]
507[ 0.179291] pci_bus 0000:01: resource 14 [mem 0xfec80000-0xfecbffff]
508[ 0.179294] pci_bus 0000:02: resource 0 [io 0xb000-0xbfff]
509[ 0.179297] pci_bus 0000:02: resource 1 [mem 0xfb000000-0xfcffffff]
510[ 0.179299] pci_bus 0000:02: resource 2 [mem 0xd8000000-0xe7ffffff 64bit pref]
511[ 0.179302] pci_bus 0000:03: resource 0 [io 0xa000-0xafff]
512[ 0.179305] pci_bus 0000:03: resource 1 [mem 0xfdd00000-0xfddfffff]
513[ 0.179308] pci_bus 0000:03: resource 2 [mem 0xfdc00000-0xfdcfffff 64bit pref]
514[ 0.179311] pci_bus 0000:04: resource 0 [io 0x9000-0x9fff]
515[ 0.179313] pci_bus 0000:04: resource 1 [mem 0xfdb00000-0xfdbfffff]
516[ 0.179316] pci_bus 0000:04: resource 2 [mem 0xfda00000-0xfdafffff 64bit pref]
517[ 0.179367] NET: Registered protocol family 2
518[ 0.179538] IP route cache hash table entries: 131072 (order: 8, 1048576 bytes)
519[ 0.181496] TCP established hash table entries: 524288 (order: 11, 8388608 bytes)
520[ 0.187585] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
521[ 0.188398] TCP: Hash tables configured (established 524288 bind 65536)
522[ 0.188401] TCP reno registered
523[ 0.188420] UDP hash table entries: 2048 (order: 4, 65536 bytes)
524[ 0.188475] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
525[ 0.188660] NET: Registered protocol family 1
526[ 0.188948] ACPI: PCI Interrupt Link [APCF] enabled at IRQ 22
527[ 0.252176] ACPI: PCI Interrupt Link [APCL] enabled at IRQ 21
528[ 0.252239] pci 0000:00:00.0: Found enabled HT MSI Mapping
529[ 0.252287] pci 0000:00:00.0: Found enabled HT MSI Mapping
530[ 0.252345] pci 0000:00:00.0: Found enabled HT MSI Mapping
531[ 0.252400] pci 0000:00:00.0: Found enabled HT MSI Mapping
532[ 0.252460] pci 0000:00:00.0: Found enabled HT MSI Mapping
533[ 0.252523] pci 0000:00:00.0: Found enabled HT MSI Mapping
534[ 0.252590] pci 0000:00:00.0: Found enabled HT MSI Mapping
535[ 0.252612] pci 0000:02:00.0: Boot video device
536[ 0.252622] PCI: CLS 64 bytes, default 64
537[ 0.252691] Trying to unpack rootfs image as initramfs...
538[ 0.371241] Freeing initrd memory: 788k freed
539[ 0.374237] microcode: CPU0: family 15 not supported
540[ 0.374248] microcode: CPU1: family 15 not supported
541[ 0.374334] microcode: Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
542[ 0.374687] audit: initializing netlink socket (disabled)
543[ 0.374706] type=2000 audit(1336259057.373:1): initialized
544[ 0.392307] HugeTLB registered 2 MB page size, pre-allocated 0 pages
545[ 0.398100] VFS: Disk quotas dquot_6.5.2
546[ 0.398234] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
547[ 0.399555] NTFS driver 2.1.30 [Flags: R/W].
548[ 0.399863] fuse init (API version 7.18)
549[ 0.400513] msgmni has been set to 6015
550[ 0.400551] SELinux: Registering netfilter hooks
551[ 0.401283] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
552[ 0.401287] io scheduler noop registered
553[ 0.401289] io scheduler deadline registered
554[ 0.401457] io scheduler cfq registered (default)
555[ 0.401670] pcieport 0000:00:09.0: irq 40 for MSI/MSI-X
556[ 0.401862] pcieport 0000:00:0b.0: irq 41 for MSI/MSI-X
557[ 0.402029] pcieport 0000:00:0c.0: irq 42 for MSI/MSI-X
558[ 0.402308] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
559[ 0.402438] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
560[ 0.403588] Non-volatile memory driver v1.3
561[ 0.403610] Linux agpgart interface v0.103
562[ 0.404293] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input0
563[ 0.404299] ACPI: Power Button [PWRB]
564[ 0.404407] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
565[ 0.404411] ACPI: Power Button [PWRF]
566[ 0.404569] ACPI: Fan [FAN] (on)
567[ 0.407310] thermal LNXTHERM:00: registered as thermal_zone0
568[ 0.407314] ACPI: Thermal Zone [THRM] (40 C)
569[ 0.407561] [drm] Initialized drm 1.1.0 20060810
570[ 0.407564] [drm:i915_init] *ERROR* drm/i915 can't work without intel_agp module!
571[ 0.410782] brd: module loaded
572[ 0.412502] loop: module loaded
573[ 0.413065] sata_nv 0000:00:08.0: version 3.5
574[ 0.413320] ACPI: PCI Interrupt Link [APSI] enabled at IRQ 23
575[ 0.413405] sata_nv 0000:00:08.0: setting latency timer to 64
576[ 0.413980] scsi0 : sata_nv
577[ 0.414200] scsi1 : sata_nv
578[ 0.414420] ata1: SATA max UDMA/133 cmd 0x9f0 ctl 0xbf0 bmdma 0xd800 irq 23
579[ 0.414423] ata2: SATA max UDMA/133 cmd 0x970 ctl 0xb70 bmdma 0xd808 irq 23
580[ 0.414640] pata_amd 0000:00:06.0: version 0.4.1
581[ 0.414687] pata_amd 0000:00:06.0: setting latency timer to 64
582[ 0.415351] scsi2 : pata_amd
583[ 0.415511] scsi3 : pata_amd
584[ 0.416133] ata3: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xf000 irq 14
585[ 0.416136] ata4: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0xf008 irq 15
586[ 0.416152] work_for_cpu used greatest stack depth: 5144 bytes left
587[ 0.416464] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
588[ 0.416468] ehci_hcd: block sizes: qh 112 qtd 96 itd 192 sitd 96
589[ 0.416571] ehci_hcd 0000:00:02.1: setting latency timer to 64
590[ 0.416574] ehci_hcd 0000:00:02.1: EHCI Host Controller
591[ 0.416616] drivers/usb/core/inode.c: creating file 'devices'
592[ 0.416621] drivers/usb/core/inode.c: creating file '001'
593[ 0.416626] ehci_hcd 0000:00:02.1: new USB bus registered, assigned bus number 1
594[ 0.416635] ehci_hcd 0000:00:02.1: reset hcs_params 0x101a8a dbg=1 cc=1 pcc=10 !ppc ports=10
595[ 0.416646] ehci_hcd 0000:00:02.1: reset portroute 0 0 0 0 0 0 0 0 0 0
596[ 0.416649] ehci_hcd 0000:00:02.1: reset hcc_params a086 caching frame 256/512/1024 park
597[ 0.416669] ehci_hcd 0000:00:02.1: park 0
598[ 0.416675] ehci_hcd 0000:00:02.1: debug port 1
599[ 0.416681] ehci_hcd 0000:00:02.1: reset command 0080b02 park=3 ithresh=8 period=1024 Reset HALT
600[ 0.416687] ehci_hcd 0000:00:02.1: cache line size of 64 is not supported
601[ 0.416689] ehci_hcd 0000:00:02.1: supports USB remote wakeup
602[ 0.416715] ehci_hcd 0000:00:02.1: irq 21, io mem 0xfe02e000
603[ 0.416720] ehci_hcd 0000:00:02.1: init command 0010005 (park)=0 ithresh=1 period=512 RUN
604[ 0.422057] ehci_hcd 0000:00:02.1: USB 2.0 started, EHCI 1.00
605[ 0.422095] usb usb1: default language 0x0409
606[ 0.422104] usb usb1: udev 1, busnum 1, minor = 0
607[ 0.422106] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
608[ 0.422109] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
609[ 0.422112] usb usb1: Product: EHCI Host Controller
610[ 0.422114] usb usb1: Manufacturer: Linux 3.3.4-gentoo ehci_hcd
611[ 0.422116] usb usb1: SerialNumber: 0000:00:02.1
612[ 0.422279] usb usb1: usb_probe_device
613[ 0.422283] usb usb1: configuration #1 chosen from 1 choice
614[ 0.422292] usb usb1: adding 1-0:1.0 (config #1, interface 0)
615[ 0.422365] hub 1-0:1.0: usb_probe_interface
616[ 0.422368] hub 1-0:1.0: usb_probe_interface - got id
617[ 0.422370] hub 1-0:1.0: USB hub found
618[ 0.422377] hub 1-0:1.0: 10 ports detected
619[ 0.422379] hub 1-0:1.0: standalone hub
620[ 0.422381] hub 1-0:1.0: no power switching (usb 1.0)
621[ 0.422383] hub 1-0:1.0: individual port over-current protection
622[ 0.422386] hub 1-0:1.0: power on to power good time: 20ms
623[ 0.422390] hub 1-0:1.0: local power source is good
624[ 0.422393] hub 1-0:1.0: trying to enable port power on non-switchable hub
625[ 0.422430] drivers/usb/core/inode.c: creating file '001'
626[ 0.422540] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
627[ 0.422543] ohci_hcd: block sizes: ed 80 td 96
628[ 0.422613] ohci_hcd 0000:00:02.0: setting latency timer to 64
629[ 0.422616] ohci_hcd 0000:00:02.0: OHCI Host Controller
630[ 0.422625] drivers/usb/core/inode.c: creating file '002'
631[ 0.422630] ohci_hcd 0000:00:02.0: new USB bus registered, assigned bus number 2
632[ 0.422649] ohci_hcd 0000:00:02.0: created debug files
633[ 0.422651] ohci_hcd 0000:00:02.0: supports USB remote wakeup
634[ 0.422672] ohci_hcd 0000:00:02.0: irq 22, io mem 0xfe02f000
635[ 0.475029] ohci_hcd 0000:00:02.0: OHCI controller state
636[ 0.475033] ohci_hcd 0000:00:02.0: OHCI 1.0, NO legacy support registers, rh state running
637[ 0.475037] ohci_hcd 0000:00:02.0: control 0x683 RWE RWC HCFS=operational CBSR=3
638[ 0.475040] ohci_hcd 0000:00:02.0: cmdstatus 0x00000 SOC=0
639[ 0.475044] ohci_hcd 0000:00:02.0: intrstatus 0x00000004 SF
640[ 0.475047] ohci_hcd 0000:00:02.0: intrenable 0x8000004a MIE RHSC RD WDH
641[ 0.475052] ohci_hcd 0000:00:02.0: hcca frame #0003
642[ 0.475057] ohci_hcd 0000:00:02.0: roothub.a 0100020a POTPGT=1 NPS NDP=10(10)
643[ 0.475060] ohci_hcd 0000:00:02.0: roothub.b 00000000 PPCM=0000 DR=0000
644[ 0.475063] ohci_hcd 0000:00:02.0: roothub.status 00008000 DRWE
645[ 0.475068] ohci_hcd 0000:00:02.0: roothub.portstatus [0] 0x00000100 PPS
646[ 0.475071] ohci_hcd 0000:00:02.0: roothub.portstatus [1] 0x00000100 PPS
647[ 0.475075] ohci_hcd 0000:00:02.0: roothub.portstatus [2] 0x00000100 PPS
648[ 0.475079] ohci_hcd 0000:00:02.0: roothub.portstatus [3] 0x00000100 PPS
649[ 0.475083] ohci_hcd 0000:00:02.0: roothub.portstatus [4] 0x00000100 PPS
650[ 0.475086] ohci_hcd 0000:00:02.0: roothub.portstatus [5] 0x00000100 PPS
651[ 0.475090] ohci_hcd 0000:00:02.0: roothub.portstatus [6] 0x00000100 PPS
652[ 0.475093] ohci_hcd 0000:00:02.0: roothub.portstatus [7] 0x00000100 PPS
653[ 0.475097] ohci_hcd 0000:00:02.0: roothub.portstatus [8] 0x00000100 PPS
654[ 0.475101] ohci_hcd 0000:00:02.0: roothub.portstatus [9] 0x00000100 PPS
655[ 0.475111] usb usb2: default language 0x0409
656[ 0.475118] usb usb2: udev 1, busnum 2, minor = 128
657[ 0.475121] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
658[ 0.475123] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
659[ 0.475126] usb usb2: Product: OHCI Host Controller
660[ 0.475128] usb usb2: Manufacturer: Linux 3.3.4-gentoo ohci_hcd
661[ 0.475130] usb usb2: SerialNumber: 0000:00:02.0
662[ 0.475255] usb usb2: usb_probe_device
663[ 0.475258] usb usb2: configuration #1 chosen from 1 choice
664[ 0.475264] usb usb2: adding 2-0:1.0 (config #1, interface 0)
665[ 0.475335] hub 2-0:1.0: usb_probe_interface
666[ 0.475338] hub 2-0:1.0: usb_probe_interface - got id
667[ 0.475340] hub 2-0:1.0: USB hub found
668[ 0.475346] hub 2-0:1.0: 10 ports detected
669[ 0.475348] hub 2-0:1.0: standalone hub
670[ 0.475350] hub 2-0:1.0: no power switching (usb 1.0)
671[ 0.475352] hub 2-0:1.0: global over-current protection
672[ 0.475354] hub 2-0:1.0: power on to power good time: 2ms
673[ 0.475358] hub 2-0:1.0: local power source is good
674[ 0.475361] hub 2-0:1.0: no over-current condition exists
675[ 0.475363] hub 2-0:1.0: trying to enable port power on non-switchable hub
676[ 0.475383] drivers/usb/core/inode.c: creating file '001'
677[ 0.475488] uhci_hcd: USB Universal Host Controller Interface driver
678[ 0.475639] usbcore: registered new interface driver uas
679[ 0.475641] Initializing USB Mass Storage driver...
680[ 0.475715] usbcore: registered new interface driver usb-storage
681[ 0.475717] USB Mass Storage support registered.
682[ 0.475795] usbcore: registered new interface driver libusual
683[ 0.475934] i8042: PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1
684[ 0.475937] i8042: PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp
685[ 0.476156] serio: i8042 KBD port at 0x60,0x64 irq 1
686[ 0.476337] mousedev: PS/2 mouse device common for all mice
687[ 0.476780] rtc_cmos 00:05: RTC can wake from S4
688[ 0.476993] rtc_cmos 00:05: rtc core: registered rtc_cmos as rtc0
689[ 0.477052] rtc0: alarms up to one year, y3k, 242 bytes nvram, hpet irqs
690[ 0.477209] cpuidle: using governor ladder
691[ 0.477211] cpuidle: using governor menu
692[ 0.477213] EFI Variables Facility v0.08 2004-May-17
693[ 0.478662] usbcore: registered new interface driver usbhid
694[ 0.478664] usbhid: USB HID core driver
695[ 0.484491] ACPI: PCI Interrupt Link [AAZA] enabled at IRQ 20
696[ 0.484515] hda_intel: Disabling MSI
697[ 0.484562] snd_hda_intel 0000:00:05.0: setting latency timer to 64
698[ 0.493464] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input2
699[ 0.522027] ehci_hcd 0000:00:02.1: GetStatus port:1 status 001803 0 ACK POWER sig=j CSC CONNECT
700[ 0.522034] hub 1-0:1.0: port 1: status 0501 change 0001
701[ 0.522043] ehci_hcd 0000:00:02.1: GetStatus port:3 status 001403 0 ACK POWER sig=k CSC CONNECT
702[ 0.522047] hub 1-0:1.0: port 3: status 0501 change 0001
703[ 0.522055] ehci_hcd 0000:00:02.1: GetStatus port:5 status 001803 0 ACK POWER sig=j CSC CONNECT
704[ 0.522059] hub 1-0:1.0: port 5: status 0501 change 0001
705[ 0.522065] ehci_hcd 0000:00:02.1: GetStatus port:6 status 001803 0 ACK POWER sig=j CSC CONNECT
706[ 0.522069] hub 1-0:1.0: port 6: status 0501 change 0001
707[ 0.575037] hub 2-0:1.0: state 7 ports 10 chg 0000 evt 0000
708[ 0.622026] hub 1-0:1.0: state 7 ports 10 chg 006a evt 0000
709[ 0.622040] hub 1-0:1.0: port 1, status 0501, change 0000, 480 Mb/s
710[ 0.673242] ehci_hcd 0000:00:02.1: port 1 high speed
711[ 0.673248] ehci_hcd 0000:00:02.1: GetStatus port:1 status 001005 0 ACK POWER sig=se0 PE CONNECT
712[ 0.720013] hda_codec: ALC888: BIOS auto-probing.
713[ 0.720017] hda_codec: ALC888: SKU not ready 0x411111f0
714[ 0.724018] usb 1-1: new high-speed USB device number 2 using ehci_hcd
715[ 0.775232] ehci_hcd 0000:00:02.1: port 1 high speed
716[ 0.775237] ehci_hcd 0000:00:02.1: GetStatus port:1 status 001005 0 ACK POWER sig=se0 PE CONNECT
717[ 0.838484] usb 1-1: default language 0x0409
718[ 0.838985] usb 1-1: udev 2, busnum 1, minor = 1
719[ 0.838988] usb 1-1: New USB device found, idVendor=1058, idProduct=071a
720[ 0.838990] usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
721[ 0.838993] usb 1-1: Product: My Passport 071A
722[ 0.838995] usb 1-1: Manufacturer: Western Digital
723[ 0.838997] usb 1-1: SerialNumber: 575847314535314E57593130
724[ 0.839132] usb 1-1: usb_probe_device
725[ 0.839137] usb 1-1: configuration #1 chosen from 1 choice
726[ 0.839235] usb 1-1: adding 1-1:1.0 (config #1, interface 0)
727[ 0.839311] uas 1-1:1.0: usb_probe_interface
728[ 0.839314] uas 1-1:1.0: usb_probe_interface - got id
729[ 0.839328] usb-storage 1-1:1.0: usb_probe_interface
730[ 0.839334] usb-storage 1-1:1.0: usb_probe_interface - got id
731[ 0.839427] scsi4 : usb-storage 1-1:1.0
732[ 0.839595] drivers/usb/core/inode.c: creating file '002'
733[ 0.839619] hub 1-0:1.0: port 3, status 0501, change 0000, 480 Mb/s
734[ 0.839625] ehci_hcd 0000:00:02.1: port 3 low speed --> companion
735[ 0.868037] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
736[ 0.871364] ata1.00: ATA-8: WDC WD3200AAKS-00UU3A0, 01.03B01, max UDMA/133
737[ 0.871367] ata1.00: 625142448 sectors, multi 16: LBA48 NCQ (depth 0/32)
738[ 0.877352] ata1.00: configured for UDMA/133
739[ 0.877534] scsi 0:0:0:0: Direct-Access ATA WDC WD3200AAKS-0 01.0 PQ: 0 ANSI: 5
740[ 0.877865] sd 0:0:0:0: [sda] 625142448 512-byte logical blocks: (320 GB/298 GiB)
741[ 0.877920] sd 0:0:0:0: [sda] Write Protect is off
742[ 0.877923] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
743[ 0.877946] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
744[ 0.877994] sd 0:0:0:0: Attached scsi generic sg0 type 0
745[ 0.890028] ehci_hcd 0000:00:02.1: GetStatus port:3 status 003402 0 ACK POWER OWNER sig=k CSC
746[ 0.890051] hub 1-0:1.0: port 5, status 0501, change 0000, 480 Mb/s
747[ 0.895750] sda: sda1 sda2
748[ 0.896277] sd 0:0:0:0: [sda] Attached SCSI disk
749[ 0.941226] ehci_hcd 0000:00:02.1: port 5 high speed
750[ 0.941231] ehci_hcd 0000:00:02.1: GetStatus port:5 status 001005 0 ACK POWER sig=se0 PE CONNECT
751[ 0.992023] usb 1-5: new high-speed USB device number 4 using ehci_hcd
752[ 1.053234] ehci_hcd 0000:00:02.1: port 5 high speed
753[ 1.053238] ehci_hcd 0000:00:02.1: GetStatus port:5 status 001005 0 ACK POWER sig=se0 PE CONNECT
754[ 1.098161] work_for_cpu used greatest stack depth: 5088 bytes left
755[ 1.098482] ACPI: PCI Interrupt Link [APC5] enabled at IRQ 16
756[ 1.098504] hda_intel: Disabling MSI
757[ 1.126482] usb 1-5: default language 0x0409
758[ 1.126857] usb 1-5: udev 4, busnum 1, minor = 3
759[ 1.126860] usb 1-5: New USB device found, idVendor=0846, idProduct=9030
760[ 1.126862] usb 1-5: New USB device strings: Mfr=16, Product=32, SerialNumber=48
761[ 1.126865] usb 1-5: Product: WNA1100
762[ 1.126867] usb 1-5: Manufacturer: NETGEAR WNA
763[ 1.126869] usb 1-5: SerialNumber: 12345
764[ 1.127032] usb 1-5: usb_probe_device
765[ 1.127036] usb 1-5: configuration #1 chosen from 1 choice
766[ 1.127237] usb 1-5: adding 1-5:1.0 (config #1, interface 0)
767[ 1.127378] drivers/usb/core/inode.c: creating file '004'
768[ 1.127412] hub 1-0:1.0: port 6, status 0501, change 0000, 480 Mb/s
769[ 1.178020] ehci_hcd 0000:00:02.1: port 6 full speed --> companion
770[ 1.178025] ehci_hcd 0000:00:02.1: GetStatus port:6 status 003001 0 ACK POWER OWNER sig=se0 CONNECT
771[ 1.178044] hub 1-0:1.0: port 6 not reset yet, waiting 50ms
772[ 1.229020] ehci_hcd 0000:00:02.1: GetStatus port:6 status 003802 0 ACK POWER OWNER sig=j CSC
773[ 1.229034] hub 1-0:1.0: state 7 ports 10 chg 0000 evt 0040
774[ 1.229038] hub 2-0:1.0: state 7 ports 10 chg 0000 evt 0048
775[ 1.229044] ohci_hcd 0000:00:02.0: GetStatus roothub.portstatus [2] = 0x00010301 CSC LSDA PPS CCS
776[ 1.229049] hub 2-0:1.0: port 3, status 0301, change 0001, 1.5 Mb/s
777[ 1.260016] HDMI status: Codec=0 Pin=4 Presence_Detect=0 ELD_Valid=0
778[ 1.263014] HDMI status: Codec=0 Pin=5 Presence_Detect=0 ELD_Valid=0
779[ 1.263833] ALSA device list:
780[ 1.263835] #0: HDA NVidia at 0xfe028000 irq 20
781[ 1.263837] #1: HDA NVidia at 0xfcffc000 irq 16
782[ 1.263878] Netfilter messages via NETLINK v0.30.
783[ 1.263898] nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
784[ 1.264276] ctnetlink v0.93: registering with nfnetlink.
785[ 1.264730] ip_tables: (C) 2000-2006 Netfilter Core Team
786[ 1.264782] TCP cubic registered
787[ 1.264784] Initializing XFRM netlink socket
788[ 1.265178] NET: Registered protocol family 10
789[ 1.265805] ip6_tables: (C) 2000-2006 Netfilter Core Team
790[ 1.265872] IPv6 over IPv4 tunneling driver
791[ 1.266543] NET: Registered protocol family 17
792[ 1.266549] Registering the dns_resolver key type
793[ 1.266600] registered taskstats version 1
794[ 1.266900] console [netcon0] enabled
795[ 1.266902] netconsole: network logging started
796[ 1.332052] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
797[ 1.333024] hub 2-0:1.0: debounce: port 3: total 100ms stable 100ms status 0x301
798[ 1.351131] ata2.00: ATAPI: HL-DT-ST DVD-RAM GH40L, 1.04, max UDMA/100
799[ 1.373120] ata2.00: configured for UDMA/100
800[ 1.381688] scsi 1:0:0:0: CD-ROM HL-DT-ST DVD-RAM GH40L 1.04 PQ: 0 ANSI: 5
801[ 1.390769] sr0: scsi3-mmc drive: 40x/40x writer dvd-ram cd/rw xa/form2 cdda tray
802[ 1.390773] cdrom: Uniform CD-ROM driver Revision: 3.20
803[ 1.391031] sr 1:0:0:0: Attached scsi CD-ROM sr0
804[ 1.391208] sr 1:0:0:0: Attached scsi generic sg1 type 5
805[ 1.391356] ata4: port disabled--ignoring
806[ 1.392449] Freeing unused kernel memory: 544k freed
807[ 1.392802] Write protecting the kernel read-only data: 12288k
808[ 1.395021] ohci_hcd 0000:00:02.0: GetStatus roothub.portstatus [2] = 0x00100303 PRSC LSDA PPS PES CCS
809[ 1.399341] Freeing unused kernel memory: 1680k freed
810[ 1.408197] Freeing unused kernel memory: 1972k freed
811[ 1.446036] usb 2-3: new low-speed USB device number 2 using ohci_hcd
812[ 1.510073] ohci_hcd 0000:00:02.0: GetStatus roothub.portstatus [2] = 0x00100303 PRSC LSDA PPS PES CCS
813[ 1.583087] usb 2-3: skipped 1 descriptor after interface
814[ 1.586068] usb 2-3: default language 0x0409
815[ 1.589065] usb 2-3: udev 2, busnum 2, minor = 129
816[ 1.589071] usb 2-3: New USB device found, idVendor=0461, idProduct=4d16
817[ 1.589074] usb 2-3: New USB device strings: Mfr=0, Product=2, SerialNumber=0
818[ 1.589077] usb 2-3: Product: USB Optical Mouse
819[ 1.589251] usb 2-3: usb_probe_device
820[ 1.589256] usb 2-3: configuration #1 chosen from 1 choice
821[ 1.592059] usb 2-3: adding 2-3:1.0 (config #1, interface 0)
822[ 1.592188] usbhid 2-3:1.0: usb_probe_interface
823[ 1.592192] usbhid 2-3:1.0: usb_probe_interface - got id
824[ 1.599484] input: USB Optical Mouse as /devices/pci0000:00/0000:00:02.0/usb2/2-3/2-3:1.0/input/input3
825[ 1.600538] generic-usb 0003:0461:4D16.0001: input,hidraw0: USB HID v1.11 Mouse [USB Optical Mouse] on usb-0000:00:02.0-3/input0
826[ 1.600571] drivers/usb/core/inode.c: creating file '002'
827[ 1.600604] ohci_hcd 0000:00:02.0: GetStatus roothub.portstatus [5] = 0x00010101 CSC PPS CCS
828[ 1.600612] hub 2-0:1.0: port 6, status 0101, change 0001, 12 Mb/s
829[ 1.704084] hub 2-0:1.0: debounce: port 6: total 100ms stable 100ms status 0x101
830[ 1.766048] ohci_hcd 0000:00:02.0: GetStatus roothub.portstatus [5] = 0x00100103 PRSC PPS PES CCS
831[ 1.817040] usb 2-6: new full-speed USB device number 3 using ohci_hcd
832[ 1.842286] scsi 4:0:0:0: Direct-Access WD My Passport 071A 2019 PQ: 0 ANSI: 4
833[ 1.844158] sd 4:0:0:0: [sdb] 625086464 512-byte logical blocks: (320 GB/298 GiB)
834[ 1.844185] sd 4:0:0:0: Attached scsi generic sg2 type 0
835[ 1.846274] sd 4:0:0:0: [sdb] Write Protect is off
836[ 1.846281] sd 4:0:0:0: [sdb] Mode Sense: 2b 00 10 08
837[ 1.848270] sd 4:0:0:0: [sdb] No Caching mode page present
838[ 1.848276] sd 4:0:0:0: [sdb] Assuming drive cache: write through
839[ 1.853546] sd 4:0:0:0: [sdb] No Caching mode page present
840[ 1.853551] sd 4:0:0:0: [sdb] Assuming drive cache: write through
841[ 1.854277] sdb: sdb1
842[ 1.860266] sd 4:0:0:0: [sdb] No Caching mode page present
843[ 1.860272] sd 4:0:0:0: [sdb] Assuming drive cache: write through
844[ 1.860275] sd 4:0:0:0: [sdb] Attached SCSI disk
845[ 1.899062] ohci_hcd 0000:00:02.0: GetStatus roothub.portstatus [5] = 0x00100103 PRSC PPS PES CCS
846[ 1.999045] usb 2-6: skipped 1 descriptor after interface
847[ 2.004039] usb 2-6: default language 0x0409
848[ 2.020039] usb 2-6: udev 3, busnum 2, minor = 130
849[ 2.020041] usb 2-6: New USB device found, idVendor=054c, idProduct=0268
850[ 2.020044] usb 2-6: New USB device strings: Mfr=1, Product=2, SerialNumber=0
851[ 2.020047] usb 2-6: Product: PLAYSTATION(R)3 Controller
852[ 2.020049] usb 2-6: Manufacturer: Sony
853[ 2.020263] usb 2-6: usb_probe_device
854[ 2.020269] usb 2-6: configuration #1 chosen from 1 choice
855[ 2.025040] usb 2-6: adding 2-6:1.0 (config #1, interface 0)
856[ 2.025152] usbhid 2-6:1.0: usb_probe_interface
857[ 2.025155] usbhid 2-6:1.0: usb_probe_interface - got id
858[ 2.049040] sony 0003:054C:0268.0002: Fixing up Sony Sixaxis report descriptor
859[ 2.094204] input: Sony PLAYSTATION(R)3 Controller as /devices/pci0000:00/0000:00:02.0/usb2/2-6/2-6:1.0/input/input4
860[ 2.094452] usbhid 2-6:1.0: looking for a minor, starting at 96
861[ 2.094866] sony 0003:054C:0268.0002: input,hiddev0,hidraw1: USB HID v1.11 Joystick [Sony PLAYSTATION(R)3 Controller] on usb-0000:00:02.0-6/input0
862[ 2.110072] drivers/usb/core/inode.c: creating file '003'
863[ 2.110097] hub 2-0:1.0: state 7 ports 10 chg 0000 evt 0040
864[ 12.066313] EXT4-fs (sdb1): mounted filesystem with ordered data mode. Opts: (null)
865[ 13.818480] loadkeys used greatest stack depth: 4960 bytes left
866[ 13.818863] init-early.sh used greatest stack depth: 4472 bytes left
867[ 15.313088] udevd[2704]: starting version 182
868[ 15.904073] ath9k_htc 1-5:1.0: usb_probe_interface
869[ 15.904078] ath9k_htc 1-5:1.0: usb_probe_interface - got id
870[ 16.426240] usb 1-5: ath9k_htc: Transferred FW: htc_9271.fw, size: 51272
871[ 16.661491] ath9k_htc 1-5:1.0: ath9k_htc: HTC initialized with 33 credits
872[ 16.857119] ath9k_htc 1-5:1.0: ath9k_htc: FW Version: 1.3
873[ 16.857123] ath: EEPROM regdomain: 0x60
874[ 16.857125] ath: EEPROM indicates we should expect a direct regpair map
875[ 16.857130] ath: Country alpha2 being used: 00
876[ 16.857131] ath: Regpair used: 0x60
877[ 16.857889] ieee80211 phy0: Atheros AR9271 Rev:1
878[ 16.858804] Registered led device: ath9k_htc-phy0
879[ 16.858811] usb 1-5: ath9k_htc: USB layer initialized
880[ 16.858844] usbcore: registered new interface driver ath9k_htc
881[ 18.429159] nvidia: module license 'NVIDIA' taints kernel.
882[ 18.429165] Disabling lock debugging due to kernel taint
883[ 18.712777] ACPI: PCI Interrupt Link [APC8] enabled at IRQ 16
884[ 18.712793] vgaarb: device changed decodes: PCI:0000:02:00.0,olddecodes=io+mem,decodes=none:owns=io+mem
885[ 18.713145] NVRM: loading NVIDIA UNIX x86_64 Kernel Module 295.49 Mon Apr 30 23:46:33 PDT 2012
886[ 21.811277] EXT4-fs (sdb1): re-mounted. Opts: (null)
887[ 23.504522] ADDRCONF(NETDEV_UP): wlan0: link is not ready
888[ 25.561247] wlan0: authenticate with 00:1e:2a:6f:46:f8 (try 1)
889[ 25.563025] wlan0: authenticated
890[ 25.563055] wlan0: associate with 00:1e:2a:6f:46:f8 (try 1)
891[ 25.565869] wlan0: RX AssocResp from 00:1e:2a:6f:46:f8 (capab=0x411 status=0 aid=1)
892[ 25.565872] wlan0: associated
893[ 25.565876] wlan0: moving STA 00:1e:2a:6f:46:f8 to state 1
894[ 25.565879] wlan0: moving STA 00:1e:2a:6f:46:f8 to state 2
895[ 25.565881] wlan0: moving STA 00:1e:2a:6f:46:f8 to state 3
896[ 25.571552] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
897[ 30.613434] dhcpcd used greatest stack depth: 4408 bytes left
898[ 36.338014] wlan0: no IPv6 routers present
899[ 415.806193] emerge used greatest stack depth: 4320 bytes left
900[ 426.919189] bash used greatest stack depth: 4256 bytes left