· 6 years ago · Oct 26, 2019, 11:24 AM
1[ 0.000000] Booting Linux on physical CPU 0x0
2[ 0.000000] Linux version 5.3.7 (dasdgw@helot) (gcc version 6.4.1 20180425 [linaro-6.4-2018.05 revision 7b15d0869c096fe39603ad63dc19ab7cf035eb70] (Linaro GCC 6.4-2018.05)) #1 SMP PREEMPT Fri Oct 18 16:29:28 CEST 2019
3[ 0.000000] CPU: ARMv7 Processor [411fc090] revision 0 (ARMv7), cr=10c5387d
4[ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
5[ 0.000000] OF: fdt: Machine model: Toshiba AC100 / Dynabook AZ
6[ 0.000000] Memory policy: Data cache writealloc
7[ 0.000000] cma: Reserved 64 MiB at 0x1c000000
8[ 0.000000] On node 0 totalpages: 131072
9[ 0.000000] Normal zone: 1024 pages used for memmap
10[ 0.000000] Normal zone: 0 pages reserved
11[ 0.000000] Normal zone: 131072 pages, LIFO batch:31
12[ 0.000000] percpu: Embedded 19 pages/cpu s48716 r8192 d20916 u77824
13[ 0.000000] pcpu-alloc: s48716 r8192 d20916 u77824 alloc=19*4096
14[ 0.000000] pcpu-alloc: [0] 0 [0] 1
15[ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 130048
16[ 0.000000] Kernel command line: root=/dev/mmcblk1p1 rootfstype=ext4 rootwait
17[ 0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes, linear)
18[ 0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes, linear)
19[ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off
20[ 0.000000] Memory: 437360K/524288K available (10240K kernel code, 837K rwdata, 2852K rodata, 1024K init, 286K bss, 21392K reserved, 65536K cma-reserved, 0K highmem)
21[ 0.000000] rcu: Preemptible hierarchical RCU implementation.
22[ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=4 to nr_cpu_ids=2.
23[ 0.000000] Tasks RCU enabled.
24[ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 10 jiffies.
25[ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=2
26[ 0.000000] NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16
27[ 0.000000] /interrupt-controller@60004000: 128 interrupts forwarded to /interrupt-controller@50041000
28[ 0.000000] L2C: platform modifies aux control register: 0x02080000 -> 0x3e480001
29[ 0.000000] L2C: DT/platform modifies aux control register: 0x02080000 -> 0x3e480001
30[ 0.000000] L2C-310 errata 727915 769419 enabled
31[ 0.000000] L2C-310 enabling early BRESP for Cortex-A9
32[ 0.000000] L2C-310: enabling full line of zeros but not enabled in Cortex-A9
33[ 0.000000] L2C-310 ID prefetch enabled, offset 1 lines
34[ 0.000000] L2C-310 cache controller enabled, 8 ways, 1024 kB
35[ 0.000000] L2C-310: CACHE_ID 0x410000c4, AUX_CTRL 0x7e480001
36[ 0.000000] random: get_random_bytes called from start_kernel+0x37c/0x510 with crng_init=0
37[ 0.000008] sched_clock: 32 bits at 1000kHz, resolution 1000ns, wraps every 2147483647500ns
38[ 0.000025] clocksource: timer_us: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275 ns
39[ 0.000034] Switching to timer-based delay loop, resolution 1000ns
40[ 0.000193] clocksource: tegra_suspend_timer: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275000 ns
41[ 0.000891] Console: colour dummy device 80x30
42[ 0.001252] printk: console [tty0] enabled
43[ 0.001280] Calibrating delay loop (skipped), value calculated using timer frequency.. 2.00 BogoMIPS (lpj=10000)
44[ 0.001305] pid_max: default: 32768 minimum: 301
45[ 0.001653] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes, linear)
46[ 0.001677] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes, linear)
47[ 0.002600] CPU: Testing write buffer coherency: ok
48[ 0.002643] CPU0: Spectre v2: using BPIALL workaround
49[ 0.002940] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
50[ 0.060111] Setting up static identity map for 0x100000 - 0x1000ac
51[ 0.080070] rcu: Hierarchical SRCU implementation.
52[ 0.100404] Tegra Revision: A02 SKU: 8 CPU Process: 2 SoC Process: 1
53[ 0.120070] smp: Bringing up secondary CPUs ...
54[ 0.200742] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001
55[ 0.200747] CPU1: Spectre v2: using BPIALL workaround
56[ 0.200874] smp: Brought up 1 node, 2 CPUs
57[ 0.200893] SMP: Total of 2 processors activated (4.00 BogoMIPS).
58[ 0.200907] CPU: All CPU(s) started in SVC mode.
59[ 0.201833] devtmpfs: initialized
60[ 0.207336] VFP support v0.3: implementor 41 architecture 3 part 30 variant 9 rev 1
61[ 0.207689] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
62[ 0.207720] futex hash table entries: 512 (order: 3, 32768 bytes, linear)
63[ 0.210671] pinctrl core: initialized pinctrl subsystem
64[ 0.212002] NET: Registered protocol family 16
65[ 0.213994] DMA: preallocated 256 KiB pool for atomic coherent allocations
66[ 0.215261] cpuidle: using governor menu
67[ 0.225249] No ATAGs?
68[ 0.225319] hw-breakpoint: found 5 (+1 reserved) breakpoint and 1 watchpoint registers.
69[ 0.225352] hw-breakpoint: maximum watchpoint size is 4 bytes.
70[ 0.263469] vgaarb: loaded
71[ 0.264316] SCSI subsystem initialized
72[ 0.264634] libata version 3.00 loaded.
73[ 0.265064] usbcore: registered new interface driver usbfs
74[ 0.265149] usbcore: registered new interface driver hub
75[ 0.265254] usbcore: registered new device driver usb
76[ 0.265468] videodev: Linux video capture interface: v2.00
77[ 0.265573] pps_core: LinuxPPS API ver. 1 registered
78[ 0.265587] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
79[ 0.265650] PTP clock support registered
80[ 0.266048] tegra20-emc 7000f400.memory-controller: EMC device tree node doesn't have memory timings
81[ 0.266523] Advanced Linux Sound Architecture Driver Initialized.
82[ 0.267280] Bluetooth: Core ver 2.22
83[ 0.267360] NET: Registered protocol family 31
84[ 0.267374] Bluetooth: HCI device and connection manager initialized
85[ 0.267396] Bluetooth: HCI socket layer initialized
86[ 0.267413] Bluetooth: L2CAP socket layer initialized
87[ 0.267442] Bluetooth: SCO socket layer initialized
88[ 0.268014] clocksource: Switched to clocksource timer_us
89[ 0.716911] NET: Registered protocol family 2
90[ 0.717870] tcp_listen_portaddr_hash hash table entries: 512 (order: 0, 6144 bytes, linear)
91[ 0.717930] TCP established hash table entries: 4096 (order: 2, 16384 bytes, linear)
92[ 0.717982] TCP bind hash table entries: 4096 (order: 3, 32768 bytes, linear)
93[ 0.718085] TCP: Hash tables configured (established 4096 bind 4096)
94[ 0.718504] UDP hash table entries: 256 (order: 1, 8192 bytes, linear)
95[ 0.718548] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes, linear)
96[ 0.718812] NET: Registered protocol family 1
97[ 0.719631] RPC: Registered named UNIX socket transport module.
98[ 0.719651] RPC: Registered udp transport module.
99[ 0.719662] RPC: Registered tcp transport module.
100[ 0.719674] RPC: Registered tcp NFSv4.1 backchannel transport module.
101[ 0.720402] PCI: CLS 0 bytes, default 64
102[ 0.721800] hw perfevents: enabled with armv7_cortex_a9 PMU driver, 7 counters available
103[ 0.723362] Initialise system trusted keyrings
104[ 0.723572] workingset: timestamp_bits=30 max_order=17 bucket_order=0
105[ 0.724519] squashfs: version 4.0 (2009/01/31) Phillip Lougher
106[ 0.725225] NFS: Registering the id_resolver key type
107[ 0.725259] Key type id_resolver registered
108[ 0.725272] Key type id_legacy registered
109[ 0.748214] Key type asymmetric registered
110[ 0.748233] Asymmetric key parser 'x509' registered
111[ 0.748259] io scheduler mq-deadline registered
112[ 0.748272] io scheduler kyber registered
113[ 0.750006] pwm-backlight backlight: backlight supply power not found, using dummy regulator
114[ 0.753154] tegra-apbdma 6000a000.dma: Tegra20 APB DMA driver register 16 channels
115[ 0.755038] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
116[ 0.756843] 70006000.serial: ttyS0 at MMIO 0x70006000 (irq = 58, base_baud = 13500000) is a Tegra
117[ 1.428082] printk: console [ttyS0] enabled
118[ 1.432905] 70006200.serial: ttyS1 at MMIO 0x70006200 (irq = 59, base_baud = 13500000) is a Tegra
119[ 1.451985] tegra-dc 54200000.dc: failed to probe RGB output: -517
120[ 1.458604] tegra-hdmi 54280000.hdmi: 54280000.hdmi supply hdmi not found, using dummy regulator
121[ 1.467455] tegra-hdmi 54280000.hdmi: failed to get PLL regulator
122[ 1.486854] loop: module loaded
123[ 1.492499] libphy: Fixed MDIO Bus: probed
124[ 1.497089] CAN device driver interface
125[ 1.501003] igb: Intel(R) Gigabit Ethernet Network Driver - version 5.6.0-k
126[ 1.507956] igb: Copyright (c) 2007-2014 Intel Corporation.
127[ 1.513969] tegra-phy c5000000.usb-phy: no vbus regulator
128[ 1.519574] tegra-phy c5004000.usb-phy: no vbus regulator
129[ 1.525125] tegra-phy c5008000.usb-phy: no vbus regulator
130[ 1.530690] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
131[ 1.537211] ehci-pci: EHCI PCI platform driver
132[ 1.541727] tegra-ehci: Tegra EHCI driver
133[ 1.598160] tegra-ehci c5004000.usb: EHCI Host Controller
134[ 1.603578] tegra-ehci c5004000.usb: new USB bus registered, assigned bus number 1
135[ 1.611479] tegra-ehci c5004000.usb: irq 67, io mem 0xc5004000
136[ 1.638035] tegra-ehci c5004000.usb: USB 2.0 started, EHCI 1.00
137[ 1.644839] hub 1-0:1.0: USB hub found
138[ 1.648641] hub 1-0:1.0: 1 port detected
139[ 1.657169] tegra-ehci c5008000.usb: EHCI Host Controller
140[ 1.662607] tegra-ehci c5008000.usb: new USB bus registered, assigned bus number 2
141[ 1.670497] tegra-ehci c5008000.usb: irq 68, io mem 0xc5008000
142[ 1.698035] tegra-ehci c5008000.usb: USB 2.0 started, EHCI 1.00
143[ 1.704747] hub 2-0:1.0: USB hub found
144[ 1.708547] hub 2-0:1.0: 1 port detected
145[ 1.713379] usbcore: registered new interface driver cdc_acm
146[ 1.719055] cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters
147[ 1.727116] usbcore: registered new interface driver cdc_wdm
148[ 1.732891] usbcore: registered new interface driver usb-storage
149[ 1.749236] tegra_rtc 7000e000.rtc: registered as rtc1
150[ 1.754375] tegra_rtc 7000e000.rtc: Tegra internal Real Time Clock
151[ 1.760949] i2c /dev entries driver
152[ 1.766965] tps6586x 2-0034: Found TPS6586X, VERSIONCRC is 05
153[ 1.774717] REG-SYS: supplied by +5valw
154[ 1.779137] REG-SM_0: supplied by vdd_sys
155[ 1.784148] REG-SM_1: supplied by vdd_sys
156[ 1.789406] REG-SM_2: supplied by vdd_sys
157[ 1.794408] REG-LDO_0: supplied by +3.7vs_sm2,vin_ldo*
158[ 1.799829] random: fast init done
159[ 1.804186] REG-LDO_1: supplied by +3.7vs_sm2,vin_ldo*
160[ 1.810439] REG-LDO_2: supplied by +3.7vs_sm2,vin_ldo*
161[ 1.816760] REG-LDO_3: supplied by +3.7vs_sm2,vin_ldo*
162[ 1.823386] REG-LDO_4: supplied by +3.7vs_sm2,vin_ldo*
163[ 1.829399] REG-LDO_5: supplied by vdd_sys
164[ 1.834491] REG-LDO_6: supplied by +3.7vs_sm2,vin_ldo*
165[ 1.839998] +2.85vs_ldo6,avdd_vdac: Bringing 2850000uV into 1800000-1800000uV
166[ 1.848470] REG-LDO_7: supplied by +3.7vs_sm2,vin_ldo*
167[ 1.854605] REG-LDO_8: supplied by +3.7vs_sm2,vin_ldo*
168[ 1.860429] REG-LDO_9: supplied by +3.7vs_sm2,vin_ldo*
169[ 1.866386] REG-LDO_RTC: supplied by vdd_sys
170[ 1.874407] tps6586x-rtc tps6586x-rtc: registered as rtc0
171[ 1.880777] gspca_main: v2.14.0 registered
172[ 1.885331] lm90 2-004c: 2-004c supply vcc not found, using dummy regulator
173[ 1.893855] sdhci: Secure Digital Host Controller Interface driver
174[ 1.900055] sdhci: Copyright(c) Pierre Ossman
175[ 1.904405] sdhci-pltfm: SDHCI platform and OF driver helper
176[ 1.910388] sdhci-tegra c8000000.sdhci: Got CD GPIO
177[ 1.915287] sdhci-tegra c8000000.sdhci: Got WP GPIO
178[ 1.920195] mmc0: Missing autocal timeout 3v3-pad drvs
179[ 1.925327] mmc0: Missing autocal timeout 3v3-pad drvs
180[ 1.930615] mmc0: Missing autocal timeout 1v8-pad drvs
181[ 1.935776] mmc0: Missing autocal timeout 1v8-pad drvs
182[ 1.948238] mmc0: Invalid maximum block size, assuming 512 bytes
183[ 1.980123] mmc0: SDHCI controller on c8000000.sdhci [c8000000.sdhci] using ADMA
184[ 1.987758] mmc1: Missing autocal timeout 3v3-pad drvs
185[ 1.992918] mmc1: Missing autocal timeout 3v3-pad drvs
186[ 1.998064] mmc1: Missing autocal timeout 1v8-pad drvs
187[ 2.003195] mmc1: Missing autocal timeout 1v8-pad drvs
188[ 2.016536] mmc1: Invalid maximum block size, assuming 512 bytes
189[ 2.018033] usb 1-1: new high-speed USB device number 2 using tegra-ehci
190[ 2.054942] mmc1: SDHCI controller on c8000600.sdhci [c8000600.sdhci] using ADMA
191[ 2.063308] usbcore: registered new interface driver usbhid
192[ 2.068929] usbhid: USB HID core driver
193[ 2.078035] usb 2-1: new high-speed USB device number 2 using tegra-ehci
194[ 2.087462] nvec 7000c500.nvec: ec firmware version 01.20.00 / f9
195[ 2.095979] input: nvec keyboard as /devices/soc0/7000c500.nvec/nvec-kbd.0/input/input1
196[ 2.111944] tegra-alc5632 sound: alc5632-hifi <-> 70002800.i2s mapping ok
197[ 2.229228] hub 1-1:1.0: USB hub found
198[ 2.233212] hub 1-1:1.0: 2 ports detected
199[ 2.279251] hub 2-1:1.0: USB hub found
200[ 2.283245] hub 2-1:1.0: 3 ports detected
201[ 2.288512] mmc1: power class selection to bus width 8 ddr 0 failed
202[ 2.294782] mmc1: new high speed MMC card at address 0001
203[ 2.314271] mmcblk1: mmc1:0001 MMC32G 29.8 GiB
204[ 2.322613] mmcblk1boot0: mmc1:0001 MMC32G partition 1 2.00 MiB
205[ 2.332325] mmcblk1boot1: mmc1:0001 MMC32G partition 2 2.00 MiB
206[ 2.338556] mmcblk1rpmb: mmc1:0001 MMC32G partition 3 256 KiB, chardev (247:0)
207[ 2.364054] mmcblk1: p1
208[ 2.558033] usb 1-1.1: new high-speed USB device number 3 using tegra-ehci
209[ 2.608027] usb 2-1.1: new high-speed USB device number 3 using tegra-ehci
210[ 2.639671] input: Compal PAZ00 Headset Jack as /devices/soc0/sound/sound/card0/input2
211[ 2.649108] NET: Registered protocol family 10
212[ 2.654849] Segment Routing with IPv6
213[ 2.658693] mip6: Mobile IPv6
214[ 2.661658] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver
215[ 2.669167] NET: Registered protocol family 17
216[ 2.673626] NET: Registered protocol family 15
217[ 2.678114] can: controller area network core (rev 20170425 abi 9)
218[ 2.684496] NET: Registered protocol family 29
219[ 2.688987] can: raw protocol (rev 20170425)
220[ 2.693253] can: broadcast manager protocol (rev 20170425 t)
221[ 2.698956] can: netlink gateway (rev 20170425) max_hops=1
222[ 2.704610] Bluetooth: RFCOMM socket layer initialized
223[ 2.709814] Bluetooth: RFCOMM ver 1.11
224[ 2.713570] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
225[ 2.718905] Bluetooth: BNEP socket layer initialized
226[ 2.723891] Bluetooth: HIDP (Human Interface Emulation) ver 1.2
227[ 2.729827] Bluetooth: HIDP socket layer initialized
228[ 2.735052] Key type dns_resolver registered
229[ 2.740157] rfkill_gpio rfkill_gpio: wifi_rfkill device registered.
230[ 2.746926] Registering SWP/SWPB emulation handler
231[ 2.752493] Loading compiled-in X.509 certificates
232[ 2.774826] cdc_acm 2-1.1:1.1: ttyACM0: USB ACM device
233[ 2.778142] tegra-dc 54200000.dc: failed to probe RGB output: -517
234[ 2.787558] tegra-hdmi 54280000.hdmi: 54280000.hdmi supply hdmi not found, using dummy regulator
235[ 2.793939] cdc_acm 2-1.1:1.3: ttyACM1: USB ACM device
236[ 2.811536] cdc_wdm 2-1.1:1.5: cdc-wdm0: USB WDM device
237[ 2.819827] cdc_wdm 2-1.1:1.8: cdc-wdm1: USB WDM device
238[ 2.820114] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
239[ 2.831733] [drm] No driver support for vblank timestamp query.
240[ 2.838184] usb 1-1.2: new full-speed USB device number 4 using tegra-ehci
241[ 2.853036] cdc_acm 2-1.1:1.9: ttyACM2: USB ACM device
242[ 2.929195] Console: switching to colour frame buffer device 128x37
243[ 2.953835] drm drm: fb0: tegradrmfb frame buffer device
244[ 2.959860] [drm] Initialized tegra 0.0.0 20120330 for drm on minor 0
245[ 2.970686] input: gpio-keys as /devices/soc0/gpio-keys/input/input4
246[ 2.987745] tps6586x-rtc tps6586x-rtc: setting system clock to 2019-10-26T10:02:50 UTC (1572084170)
247[ 2.999261] cfg80211: Loading compiled-in X.509 certificates for regulatory database
248[ 3.012632] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
249[ 3.021691] platform regulatory.0: Direct firmware load for regulatory.db failed with error -2
250[ 3.028149] ALSA device list:
251[ 3.032657] cfg80211: failed to load regulatory.db
252[ 3.039026] #0: Compal PAZ00
253[ 4.108612] psmouse serio0: elantech: assuming hardware version 3 (with firmware version 0x150500)
254[ 4.163414] psmouse serio0: elantech: Synaptics capabilities query result 0x69, 0x17, 0x09.
255[ 4.213710] psmouse serio0: elantech: Elan sample query result 03, 00, 00
256[ 4.434491] input: ETPS/2 Elantech Touchpad as /devices/serio0/input/input3
257[ 4.488415] EXT4-fs (mmcblk1p1): mounted filesystem with ordered data mode. Opts: (null)
258[ 4.507025] VFS: Mounted root (ext4 filesystem) readonly on device 179:1.
259[ 4.524439] devtmpfs: mounted
260[ 4.531206] Freeing unused kernel memory: 1024K
261[ 4.538772] Run /sbin/init as init process
262[ 5.097876] systemd[1]: Failed to find module 'autofs4'
263[ 5.156856] systemd[1]: systemd 243.78-1-arch running in system mode. (+PAM +AUDIT -SELINUX -IMA -APPARMOR +SMACK -SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN2 -IDN +PCRE2 default-hierarchy=hybrid)
264[ 5.205723] systemd[1]: Detected architecture arm.
265[ 5.250305] systemd[1]: Set hostname to <alarm>.
266[ 6.247133] random: systemd: uninitialized urandom read (16 bytes read)
267[ 6.257239] systemd[1]: system-getty.slice: unit configures an IP firewall, but the local system does not support BPF/cgroup firewalling.
268[ 6.276114] systemd[1]: (This warning is only shown for the first unit using IP firewalling.)
269[ 6.300682] systemd[1]: Created slice system-getty.slice.
270[ 6.338374] random: systemd: uninitialized urandom read (16 bytes read)
271[ 6.353375] systemd[1]: Created slice system-serial\x2dgetty.slice.
272[ 6.398821] random: systemd: uninitialized urandom read (16 bytes read)
273[ 6.420703] systemd[1]: Created slice User and Session Slice.
274[ 6.459747] systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
275[ 6.511348] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
276[ 7.378155] EXT4-fs (mmcblk1p1): re-mounted. Opts: commit=30,barrier=1,data=ordered
277[ 8.324237] systemd[149]: haveged.service: PrivateNetwork=yes is configured, but the kernel does not support network namespaces, ignoring.
278[ 8.439746] systemd[151]: systemd-udevd.service: ProtectHostname=yes is configured, but the kernel does not support UTS namespaces, ignoring namespace setup.
279[ 8.625067] systemd-journald[150]: Received client request to flush runtime journal.
280[ 10.955895] random: crng init done
281[ 10.994987] random: 7 urandom warning(s) missed due to ratelimiting
282[ 11.699944] usbcore: registered new interface driver btusb
283[ 11.707163] cdc_ether 2-1.1:1.6 wwan0: register 'cdc_ether' at usb-c5008000.usb-1.1, Mobile Broadband Network Device, 02:80:37:ec:02:00
284[ 11.762435] Bluetooth: hci0: unexpected event for opcode 0x0000
285[ 11.781764] usbcore: registered new interface driver cdc_ether
286[ 11.848107] usb 1-1.1: reset high-speed USB device number 3 using tegra-ehci
287[ 12.061076] ieee80211 phy0: rt2x00_set_rt: Info - RT chipset 3070, rev 0201 detected
288[ 12.138352] ieee80211 phy0: rt2x00_set_rf: Info - RF chipset 0005 detected
289[ 12.151653] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
290[ 12.160304] usbcore: registered new interface driver rt2800usb
291[ 12.478069] usb 2-1.2: new full-speed USB device number 4 using tegra-ehci
292[ 12.608199] usb 2-1.2: device descriptor read/64, error -32
293[ 12.848121] usb 2-1.2: device descriptor read/64, error -32
294[ 51.384696] usb 2-1-port2: Cannot enable. Maybe the USB cable is bad?
295[ 74.711568] usb 2-1-port2: Cannot enable. Maybe the USB cable is bad?
296[ 76.154819] usb 2-1-port2: Cannot enable. Maybe the USB cable is bad?
297[ 76.162215] usb 2-1-port2: attempt power cycle
298[ 77.468816] usb 2-1-port2: Cannot enable. Maybe the USB cable is bad?
299[ 79.321696] usb 2-1-port2: Cannot enable. Maybe the USB cable is bad?
300[ 79.329092] usb 2-1-port2: unable to enumerate USB device
301[ 80.824693] usb 2-1-port2: Cannot enable. Maybe the USB cable is bad?
302[ 82.684693] usb 2-1-port2: Cannot enable. Maybe the USB cable is bad?
303[ 82.692090] usb 2-1-port2: attempt power cycle
304[ 84.444695] usb 2-1-port2: Cannot enable. Maybe the USB cable is bad?
305[ 87.094696] usb 2-1-port2: Cannot enable. Maybe the USB cable is bad?
306[ 88.014694] usb 2-1-port2: Cannot enable. Maybe the USB cable is bad?
307[ 88.022090] usb 2-1-port2: attempt power cycle
308[ 89.991440] usb 2-1-port2: Cannot enable. Maybe the USB cable is bad?
309[ 92.341442] usb 2-1-port2: Cannot enable. Maybe the USB cable is bad?
310[ 93.294693] usb 2-1-port2: Cannot enable. Maybe the USB cable is bad?
311[ 93.302089] usb 2-1-port2: attempt power cycle
312[ 94.582068] usb 2-1-port2: Cannot enable. Maybe the USB cable is bad?
313[ 96.001446] usb 2-1-port2: Cannot enable. Maybe the USB cable is bad?
314[ 96.008843] usb 2-1-port2: unable to enumerate USB device
315[ 265.974700] usb 2-1-port2: Cannot enable. Maybe the USB cable is bad?
316[ 268.279194] usb 2-1-port2: Cannot enable. Maybe the USB cable is bad?
317[ 268.296103] usb 2-1-port2: attempt power cycle
318[ 273.794696] usb 2-1-port2: Cannot enable. Maybe the USB cable is bad?
319[ 275.001444] usb 2-1-port2: Cannot enable. Maybe the USB cable is bad?
320[ 275.017970] usb 2-1-port2: attempt power cycle
321[ 279.971945] usb 2-1-port2: Cannot enable. Maybe the USB cable is bad?
322[ 284.031442] usb 2-1-port2: Cannot enable. Maybe the USB cable is bad?
323[ 285.024693] usb 2-1-port2: Cannot enable. Maybe the USB cable is bad?
324[ 285.041314] usb 2-1-port2: attempt power cycle
325[ 287.024697] usb 2-1-port2: Cannot enable. Maybe the USB cable is bad?
326[ 292.098822] usb 2-1-port2: Cannot enable. Maybe the USB cable is bad?
327[ 295.554694] usb 2-1-port2: Cannot enable. Maybe the USB cable is bad?
328[ 314.281821] usb 2-1-port2: Cannot enable. Maybe the USB cable is bad?
329[ 326.744572] usb 2-1-port2: Cannot enable. Maybe the USB cable is bad?
330[ 329.861661] usb 2-1-port2: Cannot enable. Maybe the USB cable is bad?
331[ 332.384695] usb 2-1-port2: Cannot enable. Maybe the USB cable is bad?
332[ 332.400345] usb 2-1-port2: attempt power cycle
333[ 334.161819] usb 2-1-port2: Cannot enable. Maybe the USB cable is bad?
334[ 335.784571] usb 2-1-port2: Cannot enable. Maybe the USB cable is bad?
335[ 335.800766] usb 2-1-port2: unable to enumerate USB device
336[ 344.691567] usb 2-1-port2: Cannot enable. Maybe the USB cable is bad?
337[ 345.644695] usb 2-1-port2: Cannot enable. Maybe the USB cable is bad?
338[ 345.660594] usb 2-1-port2: attempt power cycle
339[ 348.084695] usb 2-1-port2: Cannot enable. Maybe the USB cable is bad?
340[ 350.172193] usb 2-1-port2: Cannot enable. Maybe the USB cable is bad?
341[ 350.187968] usb 2-1-port2: unable to enumerate USB device
342[ 356.544695] usb 2-1-port2: Cannot enable. Maybe the USB cable is bad?
343[ 360.599040] usb 2-1-port2: Cannot enable. Maybe the USB cable is bad?
344[ 364.004695] usb 2-1-port2: Cannot enable. Maybe the USB cable is bad?
345[ 364.971441] usb 2-1-port2: Cannot enable. Maybe the USB cable is bad?
346[ 364.987343] usb 2-1-port2: attempt power cycle
347[ 366.941441] usb 2-1-port2: Cannot enable. Maybe the USB cable is bad?
348[ 368.111565] usb 2-1-port2: Cannot enable. Maybe the USB cable is bad?
349[ 368.126968] usb 2-1-port2: unable to enumerate USB device
350[ 399.802071] usb 2-1-port2: Cannot enable. Maybe the USB cable is bad?
351[ 400.954700] usb 2-1-port2: Cannot enable. Maybe the USB cable is bad?
352[ 400.971793] usb 2-1-port2: attempt power cycle
353[ 402.484693] usb 2-1-port2: Cannot enable. Maybe the USB cable is bad?
354[ 404.074694] usb 2-1-port2: Cannot enable. Maybe the USB cable is bad?
355[ 404.092173] usb 2-1-port2: unable to enumerate USB device
356[ 413.182071] usb 2-1-port2: Cannot enable. Maybe the USB cable is bad?
357[ 417.724695] usb 2-1-port2: Cannot enable. Maybe the USB cable is bad?
358[ 418.901441] usb 2-1-port2: Cannot enable. Maybe the USB cable is bad?
359[ 418.918598] usb 2-1-port2: attempt power cycle
360[ 420.404698] usb 2-1-port2: Cannot enable. Maybe the USB cable is bad?
361[ 424.304693] usb 2-1-port2: Cannot enable. Maybe the USB cable is bad?
362[ 426.388822] usb 2-1-port2: Cannot enable. Maybe the USB cable is bad?
363[ 426.406034] usb 2-1-port2: attempt power cycle
364[ 432.904700] usb 2-1-port2: Cannot enable. Maybe the USB cable is bad?
365[ 439.501443] usb 2-1-port2: Cannot enable. Maybe the USB cable is bad?
366[ 445.602075] usb 2-1-port2: Cannot enable. Maybe the USB cable is bad?
367[ 449.543574] usb 2-1-port2: Cannot enable. Maybe the USB cable is bad?
368[ 450.694695] usb 2-1-port2: Cannot enable. Maybe the USB cable is bad?
369[ 450.711501] usb 2-1-port2: attempt power cycle
370[ 452.691568] usb 2-1-port2: Cannot enable. Maybe the USB cable is bad?
371[ 466.331945] usb 2-1-port2: Cannot enable. Maybe the USB cable is bad?
372[ 467.494914] usb 2-1-port2: Cannot enable. Maybe the USB cable is bad?
373[ 467.509057] usb 2-1-port2: attempt power cycle
374[ 469.650067] usb 2-1-port2: Cannot enable. Maybe the USB cable is bad?
375[ 473.384694] usb 2-1-port2: Cannot enable. Maybe the USB cable is bad?
376[ 475.028817] usb 2-1-port2: Cannot enable. Maybe the USB cable is bad?
377[ 475.046989] usb 2-1-port2: attempt power cycle
378[ 476.524693] usb 2-1-port2: Cannot enable. Maybe the USB cable is bad?
379[ 478.394694] usb 2-1-port2: Cannot enable. Maybe the USB cable is bad?
380[ 478.412558] usb 2-1-port2: unable to enumerate USB device
381[ 900.568581] usbcore: deregistering interface driver rt2800usb
382[ 901.128143] usb 1-1.1: reset high-speed USB device number 3 using tegra-ehci
383[ 901.316070] ieee80211 phy1: rt2x00_set_rt: Info - RT chipset 3070, rev 0201 detected
384[ 901.392627] ieee80211 phy1: rt2x00_set_rf: Info - RF chipset 0005 detected
385[ 901.406275] ieee80211 phy1: Selected rate control algorithm 'minstrel_ht'
386[ 901.421841] usbcore: registered new interface driver rt2800usb
387[ 902.097854] ieee80211 phy1: rt2x00lib_request_firmware: Info - Loading firmware file 'rt2870.bin'
388[ 902.113080] ieee80211 phy1: rt2x00lib_request_firmware: Info - Firmware detected - version: 0.36
389[ 904.727808] wlan0: authenticate with 54:67:51:2b:76:d4
390[ 904.804936] wlan0: send auth to 54:67:51:2b:76:d4 (try 1/3)
391[ 904.817402] wlan0: authenticated
392[ 904.826263] wlan0: associating with AP with corrupt probe response
393[ 904.847929] wlan0: associate with 54:67:51:2b:76:d4 (try 1/3)
394[ 904.875558] wlan0: RX AssocResp from 54:67:51:2b:76:d4 (capab=0x1011 status=0 aid=6)
395[ 904.896378] wlan0: associated
396[ 904.930297] wlan0: Limiting TX power to 20 (20 - 0) dBm as advertised by 54:67:51:2b:76:d4
397[ 905.374755] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
398[ 1214.027325] ieee80211 phy1: rt2x00usb_vendor_request: Error - Vendor Request 0x07 failed for offset 0x1700 with error -71
399[ 2841.489086] usbcore: deregistering interface driver rt2800usb
400[ 2842.057848] usb 1-1.1: reset high-speed USB device number 3 using tegra-ehci
401[ 2842.245831] ieee80211 phy2: rt2x00_set_rt: Info - RT chipset 3070, rev 0201 detected
402[ 2842.313884] ieee80211 phy2: rt2x00_set_rf: Info - RF chipset 0005 detected
403[ 2842.333110] ieee80211 phy2: Selected rate control algorithm 'minstrel_ht'
404[ 2842.367693] usbcore: registered new interface driver rt2800usb
405[ 2843.256211] ieee80211 phy2: rt2x00lib_request_firmware: Info - Loading firmware file 'rt2870.bin'
406[ 2843.266695] ieee80211 phy2: rt2x00lib_request_firmware: Info - Firmware detected - version: 0.36
407[ 2845.873813] wlan0: authenticate with 54:67:51:2b:76:d4
408[ 2845.950344] wlan0: send auth to 54:67:51:2b:76:d4 (try 1/3)
409[ 2845.961515] wlan0: authenticated
410[ 2845.967160] wlan0: associating with AP with corrupt probe response
411[ 2845.976037] wlan0: associate with 54:67:51:2b:76:d4 (try 1/3)
412[ 2845.997712] wlan0: RX AssocResp from 54:67:51:2b:76:d4 (capab=0x1011 status=0 aid=6)
413[ 2846.018534] wlan0: associated
414[ 2846.075002] wlan0: Limiting TX power to 20 (20 - 0) dBm as advertised by 54:67:51:2b:76:d4
415[ 2846.127470] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
416[ 2956.215369] usb 2-1.3: new high-speed USB device number 119 using tegra-ehci
417[ 2956.385908] hub 2-1.3:1.0: USB hub found
418[ 2956.397350] hub 2-1.3:1.0: 4 ports detected
419[ 2957.566038] usb 2-1.3-port1: Cannot enable. Maybe the USB cable is bad?
420[ 2959.015403] usb 2-1.3.4: new high-speed USB device number 122 using tegra-ehci
421[ 3074.193968] usb 2-1.3: USB disconnect, device number 119
422[ 3074.208760] usb 2-1.3.4: USB disconnect, device number 122
423[ 3104.787598] usbcore: deregistering interface driver rt2800usb
424[ 3104.881930] wlan0: deauthenticating from 54:67:51:2b:76:d4 by local choice (Reason: 3=DEAUTH_LEAVING)
425[ 3105.401616] usb 1-1.1: reset high-speed USB device number 3 using tegra-ehci
426[ 3105.574084] ieee80211 phy3: rt2x00_set_rt: Info - RT chipset 3070, rev 0201 detected
427[ 3105.634882] ieee80211 phy3: rt2x00_set_rf: Info - RF chipset 0005 detected
428[ 3105.648024] ieee80211 phy3: Selected rate control algorithm 'minstrel_ht'
429[ 3105.675847] usbcore: registered new interface driver rt2800usb
430[ 3105.680502] ieee80211 phy3: rt2x00lib_request_firmware: Info - Loading firmware file 'rt2870.bin'
431[ 3105.707076] ieee80211 phy3: rt2x00lib_request_firmware: Info - Firmware detected - version: 0.36
432[ 3110.382534] wlan0: authenticate with 54:67:51:2b:76:d4
433[ 3110.459936] wlan0: send auth to 54:67:51:2b:76:d4 (try 1/3)
434[ 3110.474602] wlan0: authenticated
435[ 3110.481543] wlan0: associating with AP with corrupt probe response
436[ 3110.491812] wlan0: associate with 54:67:51:2b:76:d4 (try 1/3)
437[ 3110.504861] wlan0: RX AssocResp from 54:67:51:2b:76:d4 (capab=0x1011 status=0 aid=6)
438[ 3110.531451] wlan0: associated
439[ 3110.561258] wlan0: Limiting TX power to 20 (20 - 0) dBm as advertised by 54:67:51:2b:76:d4
440[ 3111.119003] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
441[ 3920.213923] usb 2-1.3: new high-speed USB device number 123 using tegra-ehci
442[ 3920.403145] hub 2-1.3:1.0: USB hub found
443[ 3920.420520] hub 2-1.3:1.0: 4 ports detected
444[ 3921.564915] usb 2-1.3-port1: Cannot enable. Maybe the USB cable is bad?
445[ 3923.434107] usb 2-1.3.4: new high-speed USB device number 126 using tegra-ehci
446[ 4054.161977] usb 2-1.3: USB disconnect, device number 123
447[ 4054.181518] usb 2-1.3.4: USB disconnect, device number 126
448[ 4062.137921] usb 2-1.3: new high-speed USB device number 127 using tegra-ehci
449[ 4062.318137] usb-storage 2-1.3:1.0: USB Mass Storage device detected
450[ 4062.342418] scsi host0: usb-storage 2-1.3:1.0
451[ 4063.361344] scsi 0:0:0:0: Direct-Access 0.00 PQ: 0 ANSI: 2
452[ 4063.408291] sd 0:0:0:0: [sda] 2007040 512-byte logical blocks: (1.03 GB/980 MiB)
453[ 4063.422283] sd 0:0:0:0: [sda] Write Protect is off
454[ 4063.430146] sd 0:0:0:0: [sda] Mode Sense: 00 00 00 00
455[ 4063.430762] sd 0:0:0:0: [sda] Asking for cache data failed
456[ 4063.444644] sd 0:0:0:0: [sda] Assuming drive cache: write through
457[ 4063.573689] sda: sda1
458[ 4063.708708] sd 0:0:0:0: [sda] Attached SCSI removable disk
459[ 4081.810182] usb 2-1.3: USB disconnect, device number 127
460[ 4094.647338] usb 2-1.3: new high-speed USB device number 4 using tegra-ehci
461[ 4094.831825] usb-storage 2-1.3:1.0: USB Mass Storage device detected
462[ 4094.849678] scsi host0: usb-storage 2-1.3:1.0
463[ 4095.920195] scsi 0:0:0:0: Direct-Access 0.00 PQ: 0 ANSI: 2
464[ 4095.953084] sd 0:0:0:0: [sda] 2007040 512-byte logical blocks: (1.03 GB/980 MiB)
465[ 4095.966883] sd 0:0:0:0: [sda] Write Protect is off
466[ 4095.976020] sd 0:0:0:0: [sda] Mode Sense: 00 00 00 00
467[ 4095.976661] sd 0:0:0:0: [sda] Asking for cache data failed
468[ 4095.990757] sd 0:0:0:0: [sda] Assuming drive cache: write through
469[ 4096.118211] sda: sda1
470[ 4096.250922] sd 0:0:0:0: [sda] Attached SCSI removable disk
471[ 4254.865966] usb 2-1.3: USB disconnect, device number 4
472[ 4261.308668] usb 2-1.3: new full-speed USB device number 5 using tegra-ehci
473[ 4302.225968] usb 2-1.3: USB disconnect, device number 5